Powered by Deep Web Technologies
Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

A Ceramic Waste Heat Recovery System on a Rotary Forge Furnace: An Installation and Operating History  

E-Print Network (OSTI)

heavy duty high temperature ceramic tube recuperator and five high temperature recirculating burners. The energy conservation system was retrofitted onto a rotary hearth furnace with an inside diameter of 11' 5'' (3.5m) and an available hearth area...

Young, S. B.; Campbell, T. E.; Worstell, T. M.

1981-01-01T23:59:59.000Z

2

history  

National Nuclear Security Administration (NNSA)

highlights of the site's history now is available for viewing on the Y-12 public Web site at

3

Rotary filtration system  

DOE Patents (OSTI)

A rotary filtration apparatus for filtering a feed fluid into permeate is provided. The rotary filtration apparatus includes a container that has a feed fluid inlet. A shaft is at least partially disposed in the container and has a passageway for the transport of permeate. A disk stack made of a plurality of filtration disks is mounted onto the shaft so that rotation of the shaft causes rotation of the filtration disks. The filtration disks may be made of steel components and may be welded together. The shaft may penetrate a filtering section of the container at a single location. The rotary filtration apparatus may also incorporate a bellows seal to prevent leakage along the shaft, and an around the shaft union rotary joint to allow for removal of permeate. Various components of the rotary filtration apparatus may be removed as a single assembly.

Herman, David T. (Aiken, SC); Maxwell, David N. (Aiken, SC)

2011-04-19T23:59:59.000Z

4

Focus on rotary drill rigs  

SciTech Connect

This article discusses the drill rig, focusing on the rotary drill rigs. There are two principal drilling methods - rotary and percussion. In certain situations, percussion drilling is the most practical method, but for most applications, rotary drilling using the rotary-tricone bit with either steel-toothed cones or carbide inserts, is the common and accepted drilling technique. There are four principal reasons for a rotary drill rig: to provide power to the rotary-tricone bit; to provide air to clean the hole; to provide a life-support system for the rotary-tricone bits; and, to provide a stable and efficient platform from which to drill the hole.

Schivley, G.P. Jr.

1987-06-01T23:59:59.000Z

5

Video Navigation with a Personal Viewing History Abir Al-Hajri, Gregor Miller, Sidney Fels, and Matthew Fong  

E-Print Network (OSTI)

Video Navigation with a Personal Viewing History Abir Al-Hajri, Gregor Miller, Sidney Fels, Canada {abira, gregor, ssfels, mfong}@ece.ubc.ca Abstract. We describe a new video interface based previously viewed intervals, highlight segments of video the user found interesting and support other video

Millerm Gregor

6

Rotary blasthole drilling update  

SciTech Connect

Blasthole drilling rigs are the unsung heroes of open-pit mining. Recently manufacturers have announced new tools. Original equipment manufactures (OEMs) are making safer and more efficient drills. Technology and GPS navigation systems are increasing drilling accuracy. The article describes features of new pieces of equipment: Sandvik's DR460 rotary blasthole drill, P & H's C-Series drills and Atlas Copco's Pit Viper PV275 multiphase rotary blasthole drill rig. DrillNav Plus is a blasthole navigation system developed by Leica Geosystems. 5 photos.

Fiscor, S.

2008-02-15T23:59:59.000Z

7

Rotary mechanical latch  

DOE Patents (OSTI)

A rotary mechanical latch for positive latching and unlatching of a rotary device with a latchable rotating assembly having a latching gear that can be driven to latched and unlatched states by a drive mechanism such as an electric motor. A cam arm affixed to the latching gear interfaces with leading and trailing latch cams affixed to a flange within the drive mechanism. The interaction of the cam arm with leading and trailing latch cams prevents rotation of the rotating assembly by external forces such as those due to vibration or tampering.

Spletzer, Barry L.; Martinez, Michael A.; Marron, Lisa C.

2012-11-13T23:59:59.000Z

8

Rotary shaft sealing assembly  

DOE Patents (OSTI)

A rotary shaft sealing assembly in which a first fluid is partitioned from a second fluid in a housing assembly having a rotary shaft located at least partially within. In one embodiment a lip seal is lubricated and flushed with a pressure-generating seal ring preferably having an angled diverting feature. The pressure-generating seal ring and a hydrodynamic seal may be used to define a lubricant-filled region with each of the seals having hydrodynamic inlets facing the lubricant-filled region. Another aspect of the sealing assembly is having a seal to contain pressurized lubricant while withstanding high rotary speeds. Another rotary shaft sealing assembly embodiment includes a lubricant supply providing a lubricant at an elevated pressure to a region between a lip seal and a hydrodynamic seal with a flow control regulating the flow of lubricant past the lip seal. The hydrodynamic seal may include an energizer element having a modulus of elasticity greater than the modulus of elasticity of a sealing lip of the hydrodynamic seal.

Dietle, Lannie L; Schroeder, John E; Kalsi, Manmohan S; Alvarez, Patricio D

2013-08-13T23:59:59.000Z

9

Rotary magnetic heat pump  

DOE Patents (OSTI)

A rotary magnetic heat pump constructed without flow seals or segmented rotor accomplishes recuperation and regeneration by using split flow paths. Heat exchange fluid pumped through heat exchangers and returned to the heat pump splits into two flow components: one flowing counter to the rotor rotation and one flowing with the rotation. 5 figs.

Kirol, L.D.

1987-02-11T23:59:59.000Z

10

Rotary Burner Demonstration  

SciTech Connect

The subject technology, the Calcpos Rotary Burner (CRB), is a burner that is proposed to reduce energy consumption and emission levels in comparison to currently available technology. burners are used throughout industry to produce the heat that is required during the refining process. Refineries seek to minimize the use of energy in refining while still meeting EPA regulations for emissions.

Paul Flanagan

2003-04-30T23:59:59.000Z

11

Chapter Three - Rotary Seals  

Science Journals Connector (OSTI)

This chapter discusses the range of rotary seals available that can be applied across a range of industries. The basic operation, key design features and the many potential variants of rotary-shaft lip seals are discussed, plus plastic seals that can be used to extend the performance envelope. Variants that may be used for exclusion of contaminant and alternative designs of elastomer and plastic seals, some of which can be used at high pressures in specialized applications, are covered. The basic design and operation of mechanical seals are discussed. The differences in seal designs covering the range from domestic goods and automotive through process plant to turbo machinery are covered. The key features of compression packing and modern material options are presented. A wide range of other seal types are also used in rotating machinery, particularly in high-speed turbo machinery. Current developments for a number of seal types, labyrinth, honeycomb, leaf seals, brush seals and viscoseals, are summarized.

Robert Flitney

2014-01-01T23:59:59.000Z

12

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor is described which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits which return compressed discharge gas to the compressor housing, where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor. 12 figs.

Weinbrecht, J.F.

1992-02-25T23:59:59.000Z

13

Recirculating rotary gas compressor  

DOE Patents (OSTI)

A positive displacement, recirculating Roots-type rotary gas compressor which operates on the basis of flow work compression. The compressor includes a pair of large diameter recirculation conduits (24 and 26) which return compressed discharge gas to the compressor housing (14), where it is mixed with low pressure inlet gas, thereby minimizing adiabatic heating of the gas. The compressor includes a pair of involutely lobed impellers (10 and 12) and an associated port configuration which together result in uninterrupted flow of recirculation gas. The large diameter recirculation conduits equalize gas flow velocities within the compressor and minimize gas flow losses. The compressor is particularly suited to applications requiring sustained operation at higher gas compression ratios than have previously been feasible with rotary pumps, and is particularly applicable to refrigeration or other applications requiring condensation of a vapor.

Weinbrecht, John F. (601 Oakwood Loop, NE., Albuquerque, NM 87123)

1992-01-01T23:59:59.000Z

14

Rotary power slips  

SciTech Connect

This patent describes rotary power slips, for use in the rotary table of an earth drilling rig, comprising: a body; slip means carried on the body for gripping and releasing pipe in a pipe opening in a rotary table; a stationary air transfer ring supported by the body, and having a primary fluid conduit for connection to a stationary fluid source on the drilling rig, and having a transverse upper surface with at least two concentric grooves; an annular seal ring secured to the body and having a transverse lower surface and an air passageway; expansive means including an expansive ring having inner and outer edges mounted in the grooves on the upper surface of the air transfer ring and cooperative with the lower surface of the seal ring for forming an annular expansive fluid duct to conduct fluid between the primary fluid conduit and the air passageway; a fluid cylinder mounted on the body and fluidly connected to a secondary fluid conduit through the body to the air passageway for raising and lowering the slip means in response to fluid flow through the primary fluid conduit, the air passageway, and the secondary fluid conduit; and a retainer ring in each of the grooves on the upper surface of the air transfer ring, compressed against one of the edges of the expansive ring for locking the expansive ring in place.

Crowe, W.E.

1987-07-21T23:59:59.000Z

15

History  

NLE Websites -- All DOE Office Websites (Extended Search)

History History A repository for images about our legacy as a Laboratory. News Releases Media Contacts Videos Photos Fact Sheets Social Media PHOTOS BY TOPIC Careers Community...

16

Rotary shaft seal  

DOE Patents (OSTI)

The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transducer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

Langebrake, Clair O. (Waverly, OH)

1984-01-01T23:59:59.000Z

17

Rotary shaft seal  

DOE Patents (OSTI)

The invention is a novel rotary shaft seal assembly which provides positive-contact sealing when the shaft is not rotated and which operates with its sealing surfaces separated by a film of compressed ambient gas whose width is independent of the speed of shaft rotation. In a preferred embodiment, the assembly includes a disc affixed to the shaft for rotation therewith. Axially movable, non-rotatable plates respectively supported by sealing bellows are positioned on either side of the disc to be in sealing engagement therewith. Each plate carries piezoelectric transucer elements which are electrically energized at startup to produce films of compressed ambient gas between the confronting surfaces of the plates and the disc. Following shutdown of the shaft, the transducer elements are de-energized. A control circuit responds to incipient rubbing between the plate and either disc by altering the electrical input to the transducer elements to eliminate rubbing.

Langebrake, C.O.

1984-01-01T23:59:59.000Z

18

Rotary kiln seal  

SciTech Connect

A rotary seal used to prevent the escape of contaminates from a rotating kiln incinerator. The rotating seal combines a rotating disc plate which is attached to the rotating kiln shell and four sets of non-rotating carbon seal bars housed in a primary and secondary housing and which rub on the sides of the disc. A seal air system is used to create a positive pressure in a chamber between the primary and secondary seals to create a positive air flow into the contaminated gas chamber. The seal air system also employs an air inlet located between the secondary and tertiary seals to further insure that no contaminates pass the seal and enter the external environment and to provide makeup air for the air which flows into the contaminated gas chamber. The pressure exerted by the seal bars on the rotating disc is controlled by means of a preload spring. The seal is capable of operating in a thermally changing environment where the both radial expansion and axial movement of the rotating kiln do not result in the failure of the seal.

Drexler, Robert L. (Idaho Falls, ID)

1992-01-01T23:59:59.000Z

19

History  

NLE Websites -- All DOE Office Websites (Extended Search)

The target chamber under construction. Holes in the target chamber provide access for the laser beams and viewing ports for NIF diagnostic equipment. Photo Number: NIF-1209-18056...

20

Solar-heated rotary kiln  

DOE Patents (OSTI)

A solar heated rotary kiln utilized for decomposition of materials, such as zinc sulfate is disclosed. The rotary kiln has an open end and is enclosed in a sealed container having a window positioned for directing solar energy into the open end of the kiln. The material to be decomposed is directed through the container into the kiln by a feed tube. The container is also provided with an outlet for exhaust gases and an outlet for spent solids, and rests on a tiltable base. The window may be cooled and kept clear of debris by coolant gases.

Shell, P.K.

1982-04-14T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Regenerative rotary displacer Stirling engine  

SciTech Connect

A few rotary displacer Stirling engines in which the displacer has one gas pocket space at one side and rotates in a main enclosed cylinder, which is heated from one side and cooled from opposite side without any regenerator, have been studied for some time by the authors. The authors tried to improve this engine by equipping it with a regenerator, because without a regenerator, pressure oscillation and efficiency are too small. Here, several types of regenerative rotary displacer piston Stirling engines are proposed. One is the contra-rotating tandem two disc type displacer engine using axial heat conduction through side walls or by heat pipes and another is a single disc type with circulating fluid regenerator or heat pipes. Stirling engines of this new rotary displacer type are thought to attain high speed. Here, experimental results of the original rotary displacer Stirling engine without a regenerator, and one contra-rotating tandem displacer engine with side wall regenerator by axial heat conduction are reported accompanied with a discussion of the results.

Isshiki, Naotsugu; Watanabe, Hiroichi [Nihon Univ. Tokyo (Japan); Raggi, L. [Waseda Univ., Tokyo (Japan); Isshiki, Seita; Hirata, Koichi

1996-12-31T23:59:59.000Z

22

A thermodynamic analysis of the rotary-vee internal combustion engine  

E-Print Network (OSTI)

OF FIGURES FIGURE 1. IC Engine Family Tree FIGURE 2. Three Possibilities of Single Rotation Machines (SIM) . . . . . Page FIGURE 3 Planetary Rotor Motion and Path of the Apex Seal for the Wankel Engine 10 FIGURE 4. Cut-Away View of the Rand Cam Engine... for the Rotary-Vee Engine 24 FIGURE 9. Overall View of Piston And Cylinder Block Configuration, . . . FIGURE 10. Overall View Showing the Central Cavity . . . . . . . . . . . . . . . . . . . . . . . . . . . FIGURE 11. Sectioned View of the Pistons...

Bailey, Stephen Glenn

2012-06-07T23:59:59.000Z

23

Rotary mode system initial instrument calibration  

SciTech Connect

The attached report contains the vendor calibration procedures used for the initial instrument calibration of the rotary core sampling equipment. The procedures are from approved vendor information files.

Johns, B.R.

1994-10-01T23:59:59.000Z

24

Rotary kilns - transport phenomena and transport processes  

SciTech Connect

Rotary kilns and rotating industrial drying ovens are used for a wide variety of applications including processing raw minerals and feedstocks as well as heat-treating hazardous wastes. They are particularly critical in the manufacture of Portland cement. Their design and operation is critical to their efficient usage, which if done incorrectly can result in improperly treated materials and excessive, high fuel costs. This book treats all engineering aspects of rotary kilns, including thermal and fluid principles involved in their operation, as well as how to properly design an engineering process that uses rotary kilns. Chapter 1: The Rotary Kiln Evolution and Phenomenon Chapter 2: Basic Description of Rotary Kiln Operation Chapter 3: Freeboard Aerodynamic Phenomena Chapter 4: Granular Flows in Rotary Kilns Chapter 5: Mixing and Segregation Chapter 6: Combustion and Flame - includes section on types of fuels used in rotary kilns, coal types, ranking and analysis, petroleum coke combustion, scrap tire combustion, pulverized fuel (coal/coke) firing in kilns, pulverized fuel delivery and firing systems. Chapter 7: Freeboard Heat Transfer Chapter 8: Heat Transfer Processes in the Rotary Kiln Bed Chapter 9: Mass and Energy Balance Chapter 10: Rotary Kiln Minerals Process Applications.

Boateng, A.

2008-01-15T23:59:59.000Z

25

Enclosed rotary disc air pulser  

DOE Patents (OSTI)

An enclosed rotary disc air pulser for use with a solvent extraction pulse olumn includes a housing having inlet, exhaust and pulse leg ports, a shaft mounted in the housing and adapted for axial rotation therein, first and second disc members secured to the shaft within the housing in spaced relation to each other to define a chamber therebetween, the chamber being in communication with the pulse leg port, the first disc member located adjacent the inlet port, the second disc member being located adjacent the exhaust port, each disc member having a milled out portion, the disc members positioned on the shaft so that as the shaft rotates, the milled out portions permit alternative cyclical communication between the inlet port and the chamber and the exhaust port and the chamber.

Olson, A. L. (Idaho Falls, ID); Batcheller, Tom A. (Idaho Falls, ID); Rindfleisch, J. A. (Arco, ID); Morgan, John M. (Arco, ID)

1989-01-01T23:59:59.000Z

26

oil-emulsion (rotary) drilling fluid  

Science Journals Connector (OSTI)

oil-emulsion (rotary) drilling fluid, oil-emulsion fluid [Used where low fluid-loss, very thin cake, and good lubrication of the drill pipe are of primary importance, such as in directional drilling ...

2014-08-01T23:59:59.000Z

27

oil-base(d) (rotary) drilling fluid  

Science Journals Connector (OSTI)

oil-base(d) (rotary) drilling fluid, oil-base(d) fluid [Used primarily for drilling-in or recomputing wells in formations subject ... with low formation pressures. See remark under “drilling fluid”] ...

2014-08-01T23:59:59.000Z

28

Soft torque rotary system reduces drillstring failures  

SciTech Connect

This paper reports that the use of the soft torque system has significantly reduced torque fluctuations (up to 80%), torsional drillstring vibrations, and bit slip-stick conditions to help reduce drillstring failures and improve penetration rates in deep directional wells. The system was instrumental in eliminating expensive ($5-10 million) drillstring failures on Well SL 531 No. 3, a complex directional well in Mobile Bay. The soft torque rotary system attenuates and interrupts the torsional oscillations of the drillstring and thus prevents the buildup of energy in torsional waves that are reflected back and forth between the bit and the rotary table. The soft torque rotary system can be installed on any rig equipped with an independent electronically driven rotary table or top drive. The system is relatively inexpensive and easy to install.

Javanmardi, K.; Gaspard, D. (Shell Offshore Inc., New Orleans, LA (United States))

1992-10-12T23:59:59.000Z

29

ESnet History  

NLE Websites -- All DOE Office Websites (Extended Search)

(Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net ESnet History View ESnet's 25-year anniversary timeline in...

30

Rotary-linear axes for high speed machining  

E-Print Network (OSTI)

This thesis presents the design, analysis, fabrication, and control of a rotary-linear axis; this axis is a key subsystem for high speed, 5-axis machine tools intended for fabricating centimeter-scale parts. The rotary-linear ...

Liebman, Michael Kevin, 1974-

2001-01-01T23:59:59.000Z

31

Rotary Shaft Power Extraction From a Free-Piston Engine  

Energy.gov (U.S. Department of Energy (DOE))

A mechanical rectifier using modern high-performance mechanical diodes can improve direct rotary shaft power output.

32

Rotary Mode Core Sample System availability improvement  

SciTech Connect

The Rotary Mode Core Sample System (RMCSS) is used to obtain stratified samples of the waste deposits in single-shell and double-shell waste tanks at the Hanford Site. The samples are used to characterize the waste in support of ongoing and future waste remediation efforts. Four sampling trucks have been developed to obtain these samples. Truck I was the first in operation and is currently being used to obtain samples where the push mode is appropriate (i.e., no rotation of drill). Truck 2 is similar to truck 1, except for added safety features, and is in operation to obtain samples using either a push mode or rotary drill mode. Trucks 3 and 4 are now being fabricated to be essentially identical to truck 2.

Jenkins, W.W.; Bennett, K.L.; Potter, J.D. [Westinghouse Hanford Co., Richland, WA (United States); Cross, B.T.; Burkes, J.M.; Rogers, A.C. [Southwest Research Institute (United States)

1995-02-28T23:59:59.000Z

33

Computational experience with a three-dimensional rotary engine combustion model  

SciTech Connect

A new computer code was developed to analyze the chemically reactive flow and spray combustion processes occurring inside a stratified-charge rotary engine. Mathematical and numerical details of the new code were recently described by the present authors. The results are presented of limited, initial computational trials as a first step in a long-term assessment/validation process. The engine configuration studied was chosen to approximate existing rotary engine flow visualization and hot firing test rigs. Typical results include: (1) pressure and temperature histories, (2) torque generated by the nonuniform pressure distribution within the chamber, (3) energy release rates, and (4) various flow-related phenomena. These are discussed and compared with other predictions reported in the literature. The adequacy or need for improvement in the spray/combustion models and the need for incorporating an appropriate turbulence model are also discussed.

Raju, M.S.; Willis, E.A.

1990-04-01T23:59:59.000Z

34

Rollover analysis of rotary mode core sampler truck No. 2  

SciTech Connect

This document provides estimate of limiting speed and rollover analysis of rotary mode core sampler truck No. 2 (RMCST No. 2).

Ziada, H.H.

1994-11-08T23:59:59.000Z

35

Rotary Pipeline Processors Simon Moore, Peter Robinson, Steve Wilcox  

E-Print Network (OSTI)

DRAFT Rotary Pipeline Processors Simon Moore, Peter Robinson, Steve Wilcox Computer Laboratory, University of Cambridge Submitted: 15th December, 1995 Revised: 30th May, 1996 Abstract The rotary pipeline processor is a new architecture for su- perscalar computing. It is based on a simple and regular pipeline

Robinson, Peter

36

Rotary seal with improved film distribution  

DOE Patents (OSTI)

The present invention is a generally circular rotary seal that establishes sealing between relatively rotatable machine components for lubricant retention and environmental exclusion, and incorporates seal geometry that interacts with the lubricant during relative rotation to distribute a lubricant film within the dynamic sealing interface. The features of a variable inlet size, a variable dynamic lip flank slope, and a reduction in the magnitude and circumferentially oriented portion of the lubricant side interfacial contact pressure zone at the narrowest part of the lip, individually or in combination thereof, serve to maximize interfacial lubrication in severe operating conditions, and also serve to minimize lubricant shear area, seal torque, seal volume, and wear, while ensuring retrofitability into the seal grooves of existing equipment.

Dietle, Lannie Laroy; Schroeder, John Erick

2013-10-08T23:59:59.000Z

37

Computational Modeling of Relevant Automotive Rotary Spray Painting Process  

Science Journals Connector (OSTI)

During the automotive spray painting process, metallic car shells are conveyed at ... specified constant rectilinear speed through the booth. Robot-assisted rotary atomizers spray the car shell ... path particula...

Abraham J. Salazar

2013-01-01T23:59:59.000Z

38

Evaluation of Alternative Filter Media for the Rotary Microfilter  

SciTech Connect

M. R. Poirier , D. T. Herman & R. Bhave (2012) Evaluation of Alternative Filter Media for the Rotary Microfilter, Separation Science and Technology, 47:14-15, 2108-2114

Poirier, M. [Savannah River National Laboratory, Environmental and Chemical Process Technology; Herman, [Savannah River National Laboratory, Environmental and Chemical Process Technology; Bhave, Ramesh R [ORNL

2012-01-01T23:59:59.000Z

39

Purifying rotary kiln waste gases in chamotte burning  

Science Journals Connector (OSTI)

A study of the operation of electric filters connected to rotary kilns for burning clay into chamotte showed that to increase the dust extraction efficiency it is necessary: with dust concentrations in the gas...

Yu. I. Chander; S. Z. Belinskii; L. G. Borisovskii

40

Novel design of a rotary valve using axiomatic design  

E-Print Network (OSTI)

Rotary valves have existed for millennia; and while they have developed tremendously since the first Roman valves, many of the same problems have persisted. The basic problems are caused by the coupling of functional ...

Peliks, Robert Bilgor

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Surf zone monitoring using rotary wing Unmanned Aerial Vehicles  

Science Journals Connector (OSTI)

We investigate the potential of rotary wing Unmanned Aerial Vehicles (UAVs) to monitor the surf zone. We show that these UAVs are extremely flexible surveying platforms that can gather near-continuous, moderate spatial and high temporal resolution ...

Ronald L. Brouwer; Matthieu A. de Schipper; Patrick F. Rynne; Fiona J. Graham; Ad J.H.M. Reniers; Jamie H. MacMahan

42

Ultrasonic Rayleigh wave inspection of unit train rotary couplers  

E-Print Network (OSTI)

of using ultrasonic Rayleigh waves I' or the inspection of rotary couplers 'O'. Experiments rvere conducted on three couplers, one that was cracked, one that was nerv, and one new coupler with simulated cracks. IJsing a commercial probe. indications... of using ultrasonic Rayleigh waves I' or the inspection of rotary couplers 'O'. Experiments rvere conducted on three couplers, one that was cracked, one that was nerv, and one new coupler with simulated cracks. IJsing a commercial probe. indications...

Salkowski, Charles Leo

2012-06-07T23:59:59.000Z

43

Rotating head for rotary drilling rigs  

SciTech Connect

A rotating head is claimed for a rotary drilling rig which is to be secured to the top of a well pipe having an inner rotating portion with an opening therethrough which permits passage of drill pipe, pipe joints, and Kelly tools; the rotating portion has an annular drive rubber formed integrally with the top portion thereof. A rotating head drive bushing having an opening with a cross-sectional shape generally conforming to the cross-section of the Kelly tool to permit only sliding motion therebetween is provided with helical external ridges which produce a disengagable gripping action with the opening in the drive rubber at the top of the rotating portion of the rotating head. The rotating portion has a conventional stripper rubber at the bottom thereof and is mounted with a double roller bearing to provide low friction motion with respect to the fixed portion of the head. The double roller bearing is lubricated with a viscous lubricating material and paddles are provided between the sets of rollers of the double roller bearing for distributing the viscous lubricating material and in particular propel it onto the upper set of bearings; the upper body portion of the rotating head is readily detachable from the lower sleeve portion which is normally welded to the well conductor pipe.

Adams, J.R.

1983-09-27T23:59:59.000Z

44

history | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

highlights of the site's history now is available for viewing on the Y-12 public Web site at http:www.y12.doe.gov Office of Secure Transportation History Since 1947,...

45

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Wednesday, 28 April 2010 00:00 Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

46

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Wednesday, 28 April 2010 00:00 Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

47

Pick sequencing optimization problem in the rotary rack S/R system  

Science Journals Connector (OSTI)

The problem of pick sequencing in the rotary rack S/R system (PPS-RRS) is ... of minimizing the execution time. The rotary rack S/R system consists of one S/...

Pan Zhang; Lei Jia; Guohui Tian

2004-08-01T23:59:59.000Z

48

Development of multiscale models for the performance of the gas and oil seals in rotary engines  

E-Print Network (OSTI)

Rotary engines offer higher power density, fewer parts and lower vibrations than conventional reciprocating piston engines. However, rotary engines are more difficult to seal because of the rotor shape which leads to higher ...

Picard, Mathieu

2014-01-01T23:59:59.000Z

49

Results of no-flow rotary drill bit comparison testing  

SciTech Connect

This document describes the results of testing of a newer rotary sampling bit and sampler insert called the No-Flow System. This No-Flow System was tested side by side against the currently used rotary bit and sampler insert, called the Standard System. The two systems were tested using several ''hard to sample'' granular non-hazardous simulants to determine which could provide greater sample recovery. The No-Flow System measurably outperformed the Standard System in each of the tested simulants.

WITWER, K.S.

1998-11-30T23:59:59.000Z

50

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

51

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

52

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

53

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

54

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

55

ATP Synthase: Two rotary molecular motors working together  

E-Print Network (OSTI)

1 ATP Synthase: Two rotary molecular motors working together George Oster Hongyun Wang University of California, Berkeley Introduction ATP synthaseÃ?also called FoF1 ATPase, or simply F-ATPaseÃ?is the universal protein that terminates oxidative phosphorylation by synthesizing ATP from ADP and phosphate. Nearly

Wang, Hongyun

56

Micro rotary machine and methods for using same  

DOE Patents (OSTI)

A micro rotary machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft comprises a horizontal shaft and is operable to be rotated by the micro actuator. A micro tool is coupled to the micro shaft and is operable to perform work in response to motion of the micro shaft.

Stalford, Harold L. (Norman, OK)

2012-04-17T23:59:59.000Z

57

Rotary Pipeline Processors Simon Moore, Peter Robinson, Steve Wilcox  

E-Print Network (OSTI)

DRAFT Rotary Pipeline Processors Simon Moore, Peter Robinson, Steve Wilcox Computer Laboratory pipeline processor is a new architecture for su- perscalar computing. It is based on a simple and regular pipeline structure which can support several ALUs for effi- cient dispatching of multiple instructions

Moore, Simon

58

Calculator program optimizes bit weight, rotary speed, reducing drilling cost  

SciTech Connect

Bit selection, bit weight, and rotary speed have repeatedly proven to be the most important and commonly overlooked alterable factors which control penetration rate, footage, and overall drilling cost. This is particularly true in offshore operations where drilling costs are highest and the greatest cost savings stand to be achieved through implementation of proven optimization techniques. The myth that bit weights and rotary speeds cannot be optimized in directional holes has hindered the industry from using this virtually cost-free method for reducing drilling cost. The use of optimized bit weights and rotary speeds in conjunction with minimum cost bit programs based on cost per foot analysis of previous bit runs in the area was implemented on a five-well platform in the Grand Isle Block 20 field, offshore Louisiana. Each of the directional wells was drilled substantially faster and cheaper than the discovery well, which was a straight hole. Average reductions in footage cost of 31.3%, based on daily operating cost of $30,000/day, and increase in average daily footage drilled of 45.2% were effected by ''collectively optimizing'' drilling performance. The ''Optimizer'' program is an HP-41CV adaptation of the Bourgoyne and Young drilling model. It was used to calculate the optimum bit weights and rotary speeds based on field drilling tests; historical bit and bearing wear data; and current operating conditions, cost, and constraints.

Simpson, M.A.

1984-04-23T23:59:59.000Z

59

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality  

NLE Websites -- All DOE Office Websites (Extended Search)

Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Rotary Firing in Ring-Shaped Protein Explains Unidirectionality Print Hexameric motor proteins represent a complex class of molecular machines that variously push and pull on biological molecules using adenosine triphosphate (ATP) as chemical fuel. A specialized class of ring-shaped motor proteins, hexameric helicases, can unwind DNA strands and perform large-scale manipulations of single-stranded nucleic acids in processes such as DNA replication, DNA repair, and gene expression. To understand how certain hexameric helicases walk with directional polarity along single-stranded nucleic acids, Berkeley researchers used x-ray crystallography at the ALS to solve the structure of a hexameric helicase, the Rho transcription termination factor (from E. coli), bound to both ATP mimics and an RNA substrate. The results showed that Rho functions like a rotary engine: as the motor spins, it pulls RNA strands through its interior. Interestingly, the rotary firing order of the motor is biased so that the Rho protein can walk in only one direction along the RNA chain.

60

Wide and multiple apex seals for the rotary engine: (Abbr.: Multi-Apex-Seals for the Rotary Engine)  

Science Journals Connector (OSTI)

Abstract Conventional rotary engines are based on a trochoidal-type housing bore profile and its inside envelope is the basis of the rotor profile. To seal the chambers, spring-loaded apex seals are used in place of the designed rotor apexes. The conventional design method is limited to an epitrochoidal-based housing and does not consider the apex seal profile. Previously the authors presented the complete theory and algorithm of the deviation-function (DF) method of rotary engine design based on the apex seal profile. By using the DF method, the apex seal and engine housing bore are conjugate kinematic pairs, which enable the design of a variety of apex seals that conform to the bore, including wider apex seals and multiple seals at each rotor apex. The wide apex seal design has better rotor-to-housing conformity and therefore improves sealing. The multi-apex-seal grid assembly improves sealing capability and also reduces the forces on the apex seals. The incorporation of apex seal profiles into the rotary engine design process also makes possible a larger variety of new rotary engine profiles.

Sarah Warren Rose; Daniel C.H. Yang

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

34th annual reed rotary rig census  

SciTech Connect

This article reports that the number of rigs active according to the 1986 census is 1052, which represents a decline of 1573 rigs from 1985 figures. This 60 percent decrease is the largest decline of active rigs in the 34-year history of the census. The 1986 census takers found 3993 rigs are available with the capacity to drill deeper than 3000 ft. The count has thus declined by 416 rigs (9 percent) from the 1985 total of 4409. Rig availability declined for the fourth consecutive year following nine straight years of fleet expansion (1974-1982). During the past four years, 1651 rigs have been removed from the drilling fleet representing a 29 percent decline from the record high number of rigs available in 1982. The 1986 decline in the available U.S. fleet is considerably less than what many industry observers had been anticipating. A larger decrease in the rig fleet has not been realized for a number of reasons.

Hutchinson, D.L.; Pastusek, P.E.

1986-10-01T23:59:59.000Z

62

Rotary torque and rpm indicator for oil well drilling rigs  

SciTech Connect

Monitoring the torque applied by the rotary table to the drill string and the rpm of the drill string is provided. An intermediate adapter is positioned between the drill kelly and the rotary table. A strain gauge is attached to the intermediate adapter to measure torsional deformation and provide an indication of rotary torque. Transmission of torque data is accomplished by radio frequency transmission utilizing a transmitter on the intermediate adapter. A receiver is mounted to the side of the drill rig floor to receive and demodulate the torque signal. The intermediate adapter is rotating at the same rate as the drill string. Detection of the revolutions utilizing the changing R.F. Field strength is accomplished at the edge of the drill rig platform or elsewhere with a stationary sensor which doubles as the torque receiver. A highly directional torque transmitter antenna mounted on the adapter is used with the major lobe lying parallel to the rig floor and perpendicular to the pipe. By detecting the envelope of the radio frequency field strength, each rotation is marked by a peak. This enables continuous torque and rpm monitoring.

Chien, L.C.

1981-08-25T23:59:59.000Z

63

Rotary union for use with ultrasonic thickness measuring probe  

DOE Patents (OSTI)

A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body. 5 figs.

Nachbar, H.D.

1992-09-15T23:59:59.000Z

64

GoddardView Welcome Home!  

E-Print Network (OSTI)

GoddardView Welcome Home! Pg 2 - 3 History's Greatest Comet Hunter Pg 8 Employee Spotlight: Ernest Program Ends Amid Kudos - 6 Engineers Organize With A Desire To Inspire - 7 History's Greatest Comet on the runway at Edwards Air Force Base, California, after a safe landing August 9, 2005. Photo Credit: NASA 02

Christian, Eric

65

E-Print Network 3.0 - alpha rotary joint Sample Search Results  

NLE Websites -- All DOE Office Websites (Extended Search)

Drilling Diana LaBelle, John Bares, Illah Nourbakhsh Summary: , thrust, rotary speed and penetration rate, to train a neural network to classify rock. Section 2... applications...

66

Systems acceptance and operability testing for rotary mode core sampling in flammable gas tanks  

SciTech Connect

This document provides instructions for the system acceptance and operability testing of the rotary mode core sampling system, modified for use in flammable gas tanks.

Corbett, J.E., Westinghouse Hanford

1996-07-29T23:59:59.000Z

67

Beam History  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam History Print Beamline History Request Form To request a beam current histograph from the ALS storage ring beam histograph database, select the year, month, and day, then...

68

Beam History  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam Status Beam History Print Beamline History Request Form To request a beam current histograph from the ALS storage ring beam histograph database, select the year, month, and...

69

DEVELOPMENT OF A ROTARY MICROFILTER FOR RADIOACTIVE WASTE APPLICATIONS  

SciTech Connect

The processing rate of Savannah River Site (SRS) high-level waste decontamination processes are limited by the flow rate of the solid-liquid separation. The baseline process, using a 0.1 micron cross-flow filter, produces {approx}0.02 gpm/sq. ft. of filtrate under expected operating conditions. Savannah River National Laboratory (SRNL) demonstrated significantly higher filter flux for actual waste samples using a small-scale rotary filter. With funding from the U. S. Department of Energy Office of Cleanup Technology, SRNL personnel are evaluating and developing the rotary microfilter for radioactive service at SRS. The authors improved the design for the disks and filter unit to make them suitable for high-level radioactive service. They procured two units using the new design, tested them with simulated SRS wastes, and evaluated the operation of the units. Work to date provides the following conclusions and program status: (1) The authors modified the design of the filter disks to remove epoxy and Ryton{reg_sign}. The new design includes welding both stainless steel and ceramic coated stainless steel filter media to a stainless steel support plate. The welded disks were tested in the full-scale unit. They showed good reliability and met filtrate quality requirements. (2) The authors modified the design of the unit, making installation and removal easier. The new design uses a modular, one-piece filter stack that is removed simply by disassembly of a flange on the upper (inlet) side of the filter housing. All seals and rotary unions are contained within the removable stack. (3) While it is extremely difficult to predict the life of the seal, the vendor representative indicates a minimum of one year in present service conditions is reasonable. Changing the seal face material from silicon-carbide to a graphite-impregnated silicon-carbide is expected to double the life of the seal. Replacement of the current seal with an air seal could increase the lifetime to 5 years and is undergoing testing in the current work. (4) The bottom bushing showed wear due to a misalignment during the manufacture of the filter tank. Replacing the graphite bushing with a more wear resistant material such as a carbide material will increase the lifetime of the bushing. This replacement requires a more wear resistant part or coating to prevent excessive wear of the shaft. The authors are currently conducting testing with the more wear resistant bushing. (5) The project team plans to use the rotary microfilter as a filter in advance of an ion exchange process under development for potential deployment in SRS waste tank risers.

Poirier, M; David Herman, D; Samuel Fink, S

2008-02-25T23:59:59.000Z

70

Accepted Manuscript A wall heat transfer correlation for the baffled-rotary kilns with secondary air  

E-Print Network (OSTI)

Accepted Manuscript A wall heat transfer correlation for the baffled-rotary kilns with secondary;1 A wall heat transfer correlation for the baffled- rotary kilns with secondary air flow and recycled industrial applications suggests examining the heat transfer phenomena in order to improve the multi

Boyer, Edmond

71

Rotary Wing UAV Position Control using Backstepping Bilal Ahmed, Hemanshu R. Pota and Matt Garratt  

E-Print Network (OSTI)

Rotary Wing UAV Position Control using Backstepping Bilal Ahmed, Hemanshu R. Pota and Matt Garratt Abstract-- This paper presents a novel position control method for rotary wing UAVs using the backstepping for underactuated UAV including the flybar and flapping dynamics when stability derivatives are not available

Pota, Himanshu Roy

72

Structural model of F1–ATPase and the implications for rotary catalysis  

Science Journals Connector (OSTI)

...and R. M. Simmons Structural model of F1-ATPase and the implications for rotary...crystal structure of bovine mitochondrial F1-ATPase is described. Several features...approximately spherical alpha3beta3 sub-assembly. F1-ATPase|crystal structure|rotary catalysis...

2000-01-01T23:59:59.000Z

73

Electric Field Driven Torque in Biological Rotary Motors  

E-Print Network (OSTI)

Ion driven rotary motors, such as Fo-ATP synthase (Fo) and the bacterial flagellar motor, act much like a battery-powered electric motor. They convert energy from ions as they move from high to low potential across a membrane into torque and rotary motion. Here we propose a mechanism whereby electric fields, emanating from channels in one or more stators, act on asymmetric charge distributions due to protonated and deprotonated sites in the rotor and drive it to rotate. The model predicts an ideal scaling law between torque and ion motive force, which can be hindered by mitochondrial mutations. The rotor of Fo drives the gamma-subunit to rotate within the ATP-producing complex (F1), working against an opposing torque that rises and falls periodically with angular position. Drawing an analogy with Brownian motion of a particle in a tilted washboard potential, we compute the highly nonlinear ATP production rate vs. proton motive force (pmf), showing a minimum pmf needed to drive ATP production with important me...

Miller,, John H; Maric, Sladjana; Infante, Hans L; Claycomb, James R

2013-01-01T23:59:59.000Z

74

Development of a Low-Cost Rotary Steerable Drilling System  

SciTech Connect

The project had the goal to develop and commercialize a low-cost rotary steerable system (LCRSS) capable of operating downhole at conventional pressures and temperatures to reduce operating costs by a minimum of 50% and lost-in-hole charges by at least 50% over the currently offered systems. The LCRSS system developed under this project does reduce operating costs by 55% and lost-in-hole charges by at least 50%. The developed product is not commercializable in its current form. The overall objective was to develop and commercialize a low cost rotary steerable system (LCRSS) capable of operating downhole at conventional pressures and temperatures (20,000 psi/150 C) while reducing the operating costs by 50% and the lost-in-hole charges by 50% over the currently available systems. The proposed reduction in costs were to be realized through the significant reduction in tool complexity, a corresponding increase in tool reliability as expressed in the mean-time between failure (MTBF), and a reduction in the time and costs required to service tools after each field operation. Ultimately, the LCRSS system was to be capable of drilling 7 7/8 in. to 9 5/8 in. borehole diameters. The project was divided into three Phases, of which Phases I & II were previously completed and reported on, and are part of the case file. Therefore, the previously reported information is not repeated herein. Phase III included the fabrication of two field ready prototypes that were to be subjected to a series of drilling tests at GTI Catoosa, DOE RMOTC, and at customer partnering wells, if possible, as appropriate in the timing of the field test objectives to fully exercise all elements of the LCRSS. These tests were conducted in an iterative process based on a performance/reliability improvement cycle with the goal of demonstrating the system met all aspects required for commercial viability. These tests were conducted to achieve continuous runs of 100+ hours with well trajectories that fully exercised the tool's build/turn/drop/hold target capabilities and its higher end ratings for bit weight, torque and rotary speed. The tool teardowns were rigorously analyzed at the conclusion of each field run to assess component wear rates and to fully document any detrimental behavior(s) observed.

Roney Nazarian

2012-01-31T23:59:59.000Z

75

CFD Simulation of Brine-Seawater Mixing in a Rotary Energy Recovery Device  

Science Journals Connector (OSTI)

CFD Simulation of Brine-Seawater Mixing in a Rotary Energy Recovery Device ... The effects of operational conditions on the mixing behavior of rotary energy recovery device have been systematically investigated through the combined methods of computational fluid dynamics and validating experiments in this paper. ... The obtained formulas between mixing and dimensionless flow length provide a simple way to calculate and predict the mixing of device, which will be beneficial to design and operate the rotary energy recovery device in a lower mixing level. ...

Enle Xu; Yue Wang; Liming Wu; Shichang Xu; Yuxin Wang; Shichang Wang

2014-11-05T23:59:59.000Z

76

TESTING OF THE SECOND GENERATION SPINTEK ROTARY FILTER -11357  

SciTech Connect

The SpinTek rotary microfilter has been developed under the Department of Energy (DOE) Office of Environmental Management (EM) for the purpose of deployment in radioactive service in the DOE complex. The unit that was fabricated and tested is the second generation of the filter that incorporates recommended improvements from previous testing. The completion of this test satisfied a key milestone for the EM technology development program and technology readiness for deployment by Savannah River Remediation in the Small Column Ion Exchange and Sludge Washing processes at the Savannah River Site (SRS). The Savannah River National Laboratory (SRNL) contracted SpinTek Filtration to fabricate a full scale 25 disk rotary filter and perform a 1000 hour endurance test with a simulated SRS sludge. Over 1500 hours of operation have been completed with the filter. SpinTek Filtration fabricated a prototypic 25 disk rotary filter including updates to manufacturing tolerances, an updated design to the rotary joint, improved cooling to the bottom journal, decreases in disk and filter shaft hydraulic resistances. The filter disks were fabricated with 0.5 {micro} pore size, sintered-metal filter media manufactured by Pall Corporation (M050). After fabrication was complete, the filter passed acceptance tests demonstrating rejection of solids and clean water flux with a 50% improvement over the previous filters. Once the acceptance test was complete, a 1000 hour endurance test was initiated simulating a sludge washing process. The test used a simulated SRS Sludge Batch 6 recipe. The insoluble solids started at 5 wt% and were raised to 10 and 15 wt% insoluble solids to simulate the concentration of a large volume tank. The filter system was automated and set up for 24 hour unattended operation. To facilitate this, process control logic was written to operate the filter. During the development it was demonstrated that the method of starting and stopping the filter can affect the build up of filter cake on the disks and therefore the performance of the filter. The filter performed well with the simulant. Very little drop in production was noticed between the 5 and 10 wt% insoluble solids feed. Increasing to 15 wt% had a more pronounced impact due to the rheology of the feed. Acid cleaning was used to clean the filter disks in-situ and restore filtration rate to almost 90% of the initial clean disk rate. Eighty liters of 0.2 M nitric acid in conjunction with water rinses were used to clean the filter in less than 2 hours. Filter testing was completed after 1000 hours of operation were performed on the final filter assembly configuration. The total run time for the testing was over 1500 hours. At the end of the test, the sludge washing was performed successfully from approximately 5.6 M to less than 1 M sodium.

Herman, D.; Poirier, M.; Fowley, M.; Keefer, M.; Huff, T.

2011-02-02T23:59:59.000Z

77

Theoretical and experimental study on regenerative rotary displacer Stirling engine  

SciTech Connect

Recently a quite new type of hot air engine called rotary displacer engine, in which the displacer is a rotating disk enclosed in a cylinder, has been conceived and developed. The working gas, contained in a notch excavated in the disk, is heated and cooled alternately, on account of the heat transferred through the enclosing cylinder that is heated at one side and cooled at the opposite one. The gas temperature oscillations cause the pressure fluctuations that get out mechanical power acting on a power piston. In order to attempt to increase the performances for this kind of engine, the authors propose three different regeneration methods. The first one comprises two coaxial disks that, revolving in opposite ways, cause a temperature gradient on the cylinder wall and a regenerative axial heat conduction through fins shaped on the cylinder inner wall. The other two methods are based on the heat transferred by a proper closed circuit that in one case has a circulating liquid inside and in the other one is formed by several heat pipes working each one for different temperatures. An engine based on the first principle, the Regenerative Tandem Contra-Rotary Displacer Stirling Engine, has been realized and experimented. In this paper experimental results with and without regeneration are reported comparatively with a detailed description of the unity. A basic explanation of the working principle of this engine and a theoretical analysis investigating the main influential parameters for the regenerative effect are done. This new rotating displacer Stirling engines, for their simplicity, are expected to attain high rotational speed especially for applications as demonstration and hobby unities.

Raggi, L.; Katsuta, Masafumi [Waseda Univ., Tokyo (Japan); Isshiki, Naotsugu [Nihon Univ., Tokyo (Japan); Isshiki, Seita [Isshiki R and D Lab., Tokyo (Japan)

1997-12-31T23:59:59.000Z

78

Calculation of the geometric parameters of rotary rolling by using the automated design system autodesk inventor  

Science Journals Connector (OSTI)

A method is proposed for calculating the profile of the rolls of a rotary rolling mill with the use of the 3D-modeling program Autodesk Inventor. The universality of the method is...

S. M. Gorbatyuk; V. A. Osadchii; E. Z. Tuktarov

2011-11-01T23:59:59.000Z

79

Method for determining effective flame emissivity in a rotary kiln incinerator burning solid waste  

Science Journals Connector (OSTI)

Temperature is the most important parameter for the improvement of combustion efficiency and the control of pollutants. In order to obtain accurate flame temperatures in a rotary kiln incinerator using non-int...

Jin-cai Du; Qun-xing Huang; Jian-hua Yan

2012-12-01T23:59:59.000Z

80

James Walker develops Walkersele D8 – a new rotary lip seal for marine propulsion systems  

Science Journals Connector (OSTI)

Walkersele D8 is a new design of rotary lip seal developed by James Walker & Co Ltd for use in marine propulsion systems to protect bearings from water ingress or prevent lubricant from leaking into the marine environment.

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Rotary Triboelectric Nanogenerator Based on a Hybridized Mechanism for Harvesting Wind Energy  

Science Journals Connector (OSTI)

Rotary Triboelectric Nanogenerator Based on a Hybridized Mechanism for Harvesting Wind Energy ... Triboelectric nanogenerator (TENG) is a simple, cost-effective, and highly efficient approach for generating electricity from mechanical energies in a wide range of forms. ...

Yannan Xie; Sihong Wang; Long Lin; Qingshen Jing; Zong-Hong Lin; Simiao Niu; Zhengyun Wu; Zhong Lin Wang

2013-06-14T23:59:59.000Z

82

SRS - History Highlights  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 SEARCH GO Side Menu Spacer SRS Mission & Vision Where We Are SRS History Fact Sheets Tour SRS Contact SRS SRS Home SRS History Highlights The Savannah River Site was constructed during the early 1950s to produce the basic materials used in the fabrication of nuclear weapons, primarily tritium and plutonium-239, in support of our nation's defense programs. Five reactors were built to produce these materials. Also built were a number of support facilities including two chemical separations plants, a heavy water extraction plant, a nuclear fuel and target fabrication facility, a tritium extraction facility and waste management facilities. If you wish to view an in-depth history (1950-2000), please explore SRS at Fifty, our 50th anniversary book. Browse by Era: 1950s * 1960s * 1970s * 1980s * 1990s * 2000s * 2010s

83

Design of a new type of rotary Stirling engine  

SciTech Connect

The Stirling machine has had wide diffusion only in cold or cryogenic applications (Philips) while the engine, despite big efforts of large Companies (Philips, Westinghouse, General Motors, etc.), never definitively reached the market; today new interest is raised correlated with environmental and energy related considerations. Thus, researchers efforts are addressed towards the design of innovative and more competitive Stirling engine configurations, like the one here proposed. This paper describes the configuration of a new, rotary Stirling engine. In the cold part of the engine, the working fluid is compressed by a rotating element, then it passes through the regenerator from the cold to the hot end, where it absorbs the heat and expands in the high pressure and temperature area. The high pressure working fluid pushes on the rotating element (the so called rotator) and the engine outputs power. In the design, compression and expansion volumes change with the rotation. Two rotators are connected with a set of gears: therefore, the engine transmission system is simplified and dimensions are reduced.

Abenavoli, R.I.; Dong, W.; Fedele, L.; Sciaboni, A. [Univ. La Sapienza, Rome (Italy). Dipt. di Meccanica e Aeronautica

1996-12-31T23:59:59.000Z

84

Sway control method and system for rotary cranes  

DOE Patents (OSTI)

Methods and apparatuses for reducing the oscillatory motion of rotary crane payloads during operator-commanded or computer-controlled maneuvers. An Input-shaping filter receives input signals from multiple operator input devices and converts them into output signals readable by the crane controller to dampen the payload tangential and radial sway associated with rotation of the jib. The input signals are characterized by a hub rotation trajectory .gamma.(t), which includes a jib angular acceleration .gamma., a trolley acceleration x, and a load-line length velocity L. The system state variables are characterized by a tangential rotation angle .theta.(t) and a radial rotation angle .phi.(t) of the load-line. The coupled equations of motion governing the filter are non-linear and configuration-dependent. In one embodiment, a filter is provided between the operator and the crane for filtering undesired frequencies from the angular .gamma. and trolley x velocities to suppress payload oscillation. In another embodiment, crane commands are computer generated and controlled to suppress vibration of the payload using a postulated asymmetrical shape for the acceleration profiles of the jib, which profiles are uniquely determined by a set of parameters (including the acceleration pulse amplitude and the duration and coast time between pulses), or a dynamic programming approach.

Robinett, Rush D. (Tijeras, NM); Parker, Gordon G. (Houghton, MI); Feddema, John T. (Albuquerque, NM); Dohrmann, Clark R. (Albuquerque, NM); Petterson, Ben J. (Albuquerque, NM)

1999-01-01T23:59:59.000Z

85

Preserving and Querying Histories of XML-Published Relational Databases  

E-Print Network (OSTI)

Preserving and Querying Histories of XML-Published Relational Databases Fusheng Wang and Carlo the evolution history of such a view as yet another XML document, whereby the complete history of the database, and identify and select those which are best for representing and querying database histories. We show

Zaniolo, Carlo

86

VILLAR-ARGAIZ, MANUEL, AND ROBERT W. STERNER Life history  

Science Journals Connector (OSTI)

PATTERSON, M. R. 1992. A chemical engineering view of cnidarian ... Life history bottlenecks in Diaptomus clavipes induced by phosphorus-limited algae.

2002-06-25T23:59:59.000Z

87

History Images  

NLE Websites -- All DOE Office Websites (Extended Search)

History Images History Images Los Alamos History in Images Los Alamos has a proud history and heritage of almost 70 years of science and innovation. The people of the Laboratory work on advanced technologies to provide the best scientific and engineering solutions to many of the nation's most crucial security challenges. Click thumbnails to enlarge. Photos arranged by most recent first, horizontal formats before vertical. See Flickr for more sizes and details. Back in the day Back in the day LA bridge in Los Alamos LA bridge in Los Alamos 1945 Army-Navy "E" Award 1945 Army-Navy "E" Award Louis Rosen Louis Rosen Bob Van Ness Robert Kuckuck and Michael Anastasio Bob Van Ness Robert Kuckuck and Michael Anastasio TA-18 TA-18 Elmer Island TU-4 assembly area Elmer Island TU-4 assembly area

88

News and Views  

Science Journals Connector (OSTI)

... and so an accelerated service and more stations were required. Transformers are used at the substations to step down the high pressure power to rotary converters which transform the alternating into ... uniform and furnish a reserve of power, a battery of accumulators is installed at each substation. The machines and switchgear at the ...

1931-05-23T23:59:59.000Z

89

[News and Views  

Science Journals Connector (OSTI)

... miles of steel-core aluminium conductors used in the transmission. The distance between consecutive traction substations on the main line is twelve miles. The pressure of transmission is 95 kilovolts, ... transmission is 95 kilovolts, and this is transformed into 560 volts at the open-air substations and then converted into 1500 volts direct current by rotary machines connected in series. ...

1931-09-05T23:59:59.000Z

90

Cosmic Growth History and Expansion History  

E-Print Network (OSTI)

of the expansion history dark energy equation of state,and growth history constraints on the dark energy equationand growth history constraints on the dark energy equation

Linder, Eric V.

2009-01-01T23:59:59.000Z

91

Rotary seal with enhanced lubrication and contaminant flushing  

DOE Patents (OSTI)

A resilient, ring shaped interference-type hydrodynamic rotary seal having waves on the lubricant side which provide increased film thickness and flushing action by creating contact pressure induced angulated restrictions formed by abrupt restrictive diverters. The angulated restrictions are defined by projecting ridges, corners at the trailing edge of the waves, or simply by use of a converging shape at the trailing edge of the waves which is more abrupt than the gently converging hydrodynamic inlet shape at the leading edge of the waves. The abrupt restrictive diverter performs two functions; a restricting function and a diverting function. The angulated restrictions cause a local film thickness restriction which produces a damming effect preventing a portion of the lubricant from leaking out of the dynamic sealing interface at the trailing edge of the wave, and results in a much thicker lubricant film thickness under the waves. This contributes to more film thickness in the remainder of the dynamic sealing interface toward the environment because film thickness tends to decay gradually rather than abruptly due to the relative stiffness of the seal material. Because of the angle of the abrupt restrictive diverter relative to the relative rotation direction, in conjunction with the restriction or damming effect, a strong diverting action is produced which pumps lubricant across the dynamic sealing interface toward the environment. The lubricant diversion is caused by the component of the rotational velocity tangent to the abrupt restrictive diverter. The component of rotational velocity normal to the abrupt restrictive diverter causes a portion of the lubricant film to be pumped past the abrupt restrictive diverter, thereby assuring adequate lubrication thereof.

Dietle, Lannie L. (Sugar Land, TX)

2000-01-01T23:59:59.000Z

92

HumanWildlife Interactions 8(2):251260, Fall 2014 Wildlife strikes with U.S. military rotary-  

E-Print Network (OSTI)

, but unstudied, physical hazard to military rotary-wing aircraft used in conducting overseas flight operations to military rotary-wing aircraft during these operations has been conducted. The objectives of this project deployed overseas to conduct a variety of noncombat and combat missions. Our objective was to conduct

93

NETL: History  

NLE Websites -- All DOE Office Websites (Extended Search)

History History About NETL History Over the past century, fossil energy research and technology development has been advanced by NETL and its predecessor facilities as the energy needs of the Nation have grown and evolved. 1910 - The newly created Bureau of Mines in the U.S. Department of the Interior (DOI) opens the Pittsburgh Experiment Station in Bruceton, Pennsylvania, 12 miles south of Pittsburgh. The station includes an experimental coal mine and offers advanced training for coal operators and miners. Onsite research focuses on developing innovative coal-mining safety equipment and practices. 1918 - Following new discoveries of oil in Oklahoma and Texas, the Petroleum Experiment Station is established in Bartlesville, Oklahoma, as one of 17 DOI Bureau of Mines facilities under Public Law 283 (63rd Congress, 1915). The Station pursues systematic application of engineering and scientific methods to oil drilling, helping the early "boom and bust" oil industry create operating and safety standards.

94

NERSC History  

NLE Websites -- All DOE Office Websites (Extended Search)

History History NERSC History Powering Scientific Discovery Since 1974 Contact: Jon Bashor, jbashor@lbl.gov, +1 510 486 4236 For more information, read "25 Years of Leadership," a historical perspective written at NERSC's quarter-century mark.⨠Download (PDF, 1.7MB) The oil crisis of 1973 did more than create long lines at the gas pumps - it jumpstarted a supercomputing revolution. The quest for alternative energy sources led to increased funding for the Department of Energy's Magnetic Fusion Energy program, and simulating the behavior of plasma in a fusion reactor required a computer center dedicated to this purpose. Founded in 1974 at Lawrence Livermore National Laboratory, the Controlled Thermonuclear Research Computer Center was the first unclassified supercomputer center and was the model for those that

95

EVALUATION OF SUPPLEMENTAL PRE-TREATMENT DEVELOPMENT REQUIREMENTS TO MEET TRL 6 ROTARY MICROFILTRATION  

SciTech Connect

In spring 2011, the Technology Maturation Plan (TMP) for the Supplemental Treatment Project (RPP-PLAN-49827, Rev. 0), Technology Maturation Plan for the Treatment Project (T4S01) was developed. This plan contains all identified actions required to reach technical maturity for a field-deployable waste feed pretreatment system. The supplemental pretreatment system has a filtration and a Cs-removal component. Subsequent to issuance of the TMP, rotary microfiltration (RMF) has been identified as the prime filtration technology for this application. The prime Cs-removal technology is small column ion exchange (ScIX) using spherical resorcinol formaldehyde (sRF) as the exchange resin. During fiscal year 2011 (FY2011) some of the tasks identified in the TMP have been completed. As of September 2011, the conceptual design package has been submitted to DOE as part of the critical decision (CD-1) process. This document describes the remaining tasks identified in the TMP to reach technical maturity and evaluates the validity of the proposed tests to fill the gaps as previously identified in the TMP. The potential vulnerabilities are presented and the completed list of criteria for the DOE guide DOE G 413.3-4 different technology readiness levels are added in an attachment. This evaluation has been conducted from a technology development perspective - all programmatic and manufacturing aspects were excluded from this exercise. Compliance with the DOE G 413.3-4 programmatic and manufacturing requirements will be addressed directly by the Treatment Project during the course of engineering design. The results of this evaluation show that completion of the proposed development tasks in the TMP are sufficient to reach TRL 6 from a technological point of view. The tasks involve actual waste tests using the current baseline configuration (2nd generation disks, 40 psi differential pressure, 30 C feed temperature) and three different simulants - the PEP, an AP-Farm and an S-saltcake. Based on FY2011 dollars used in the TMP, these tests will have ROM costs of $950K and require up to 10 months to complete. Completion of the simulant testing will satisfy the TRL 5 and TRL 6 criteria that are related to system testing with materials that represent the full range of properties in a relevant environment.

HUBER HJ

2011-10-03T23:59:59.000Z

96

An introduction to API 682 shaft sealing for centrifugal and rotary pumps  

SciTech Connect

Seal failures in refineries represents between 5,000 and 10,000 dollars in maintenance costs. The lack of an industry standard approach has resulted in high-stocking cost, high maintenance costs, and complicated populations of seals. The API has offered API 682, Shaft Sealing Systems for Centrifugal and Rotary Pumps. This report discusses the benefits of API 682.

Dufour, J.W. [Amoco Oil Company, Chicago, IL (United States); Jones, R.L. [Shell Oil Company, Houston, TX (United States)

1994-11-01T23:59:59.000Z

97

Operability test report for rotary mode core sampling system number 3  

SciTech Connect

This report documents the successful completion of operability testing for the Rotary Mode Core Sampling (RMCS) system {number_sign}3. The Report includes the test procedure (WHC-SD-WM-OTP-174), exception resolutions, data sheets, and a test report summary.

Corbett, J.E.

1996-03-01T23:59:59.000Z

98

ORISE: History  

NLE Websites -- All DOE Office Websites (Extended Search)

History History The Oak Ridge Institute for Science and Education (ORISE) is a national leader in science education and research, with programs dating back to 1946 and having served as an official U.S. Department of Energy (DOE) institute since 1992. The institute that eventually became what is known today as ORISE was the brainchild of University of Tennessee (UT) physics professor Dr. William G. Pollard. Aware of the valuable assets on hand in Oak Ridge, Tenn., as part of the Manhattan Project, Pollard talked about the possibility of aligning regional universities with the scientific resources and state-of-the-art equipment in Oak Ridge. On Oct. 17, 1946, Pollard's vision became a reality when the Oak Ridge Institute of Nuclear Studies (ORINS) received a charter of incorporation

99

Revision History  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Revision History Revision History Rev. 0, August 2012 Original submittal for milestone M3FT-12SN0804032 (Sandia programmatic and classification review) Rev. 1, September 2012 Corrected transposition errors in costing tables; recalculated stainless steel overpacks to be carbon steel; corrected various editorial problems. (SAND2012-7979P) Rev. 2, November 2012 Performed peer review and retitled. Submittal for milestone M2FT-13SN0804031 (formerly milestone M2FT- 12SN0804031) (SAND2012-9737P) Unclassified Unlimited Release Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

100

History - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

History History Lawrence's original Cyclotron, for which he received a patent and the Nobel Prize. Lawrence's original cyclotron design was limited to energies where relativistic effects were not important. The third generation cyclotron included "sector-focusing" to allow higher energies to be obtained. The 88-Inch Cyclotron was based on Lawrence's design of a sector-focused cyclotron for the MTA project at Livermore. 1500 man-hours of work were necessary to assemble the trim coils which help regulate the strength and shape of the accelerator's magnetic field. Discussing the cyclotron magnet (seen in the background) are Dr. Elmer Kelly, physicist in charge of the 88-Inch Cyclotron and Warren Dexter, electrical coordinator for the cyclotron project.

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Complexity in Big History  

E-Print Network (OSTI)

Spier, Fred. “How Big History Works: Energy Flows and RiseSmil, Vaclav. Energy in World History. Boulder, CO: Westviewkg) Energy and complexity Spier: Complexity in Big History.

Spier, Fred

2011-01-01T23:59:59.000Z

102

Jefferson and Hamilton as viewed by historians  

E-Print Network (OSTI)

JEFFERSON AND HAMILTON AS VIEHED BY HISTORIANS A Thesis Paul Edward Jungmeyer Submitted to the Graduate College of Texas A&M University in ' partial fulfillment of the requirement for the degree of MASTER OF ARTS August, 1970 Major Subject...: History JEFFERSON AND HAMILTON AS VIEWED BY HISTORIANS A Thesis by Paul Edward Jungmeyer Approved as to style and content by: (Chairman of Committee d i~) (Member) (M er) August, 1970 ABSTRACT JEFFERSON AND HAMILTON AS VIEWED BY HISTORIANS...

Jungmeyer, Paul Edward

2012-06-07T23:59:59.000Z

103

Small mill for the high-temperature rotary rolling of semifinished products composed of refractory metals in protective media  

Science Journals Connector (OSTI)

A description is presented of a small vacuum-type rotary rolling mill designed for the high-temperature deformation of semifinished products to obtain bars 7–10 mm in diameter. It is shown that the CAD software Autodesk

S. M. Gorbatyuk; E. Z. Tuktarov; L. A. Rudenskii

2012-01-01T23:59:59.000Z

104

TESTING OF A FULL-SCALE ROTARY MICROFILTER FOR THE ENHANCED PROCESS FOR RADIONUCLIDES REMOVAL  

SciTech Connect

Savannah River National Laboratory (SRNL) researchers are investigating and developing a rotary microfilter for solid-liquid separation applications in the Department of Energy (DOE) complex. One application involves use in the Enhanced Processes for Radionuclide Removal (EPRR) at the Savannah River Site (SRS). To assess this application, the authors performed rotary filter testing with a full-scale, 25-disk unit manufactured by SpinTek Filtration with 0.5 micron filter media manufactured by Pall Corporation. The filter includes proprietary enhancements by SRNL. The most recent enhancement is replacement of the filter's main shaft seal with a John Crane Type 28LD gas-cooled seal. The feed material was SRS Tank 8F simulated sludge blended with monosodium titanate (MST). Testing examined total insoluble solids concentrations of 0.06 wt % (126 hours of testing) and 5 wt % (82 hours of testing). The following are conclusions from this testing.

Herman, D; David Stefanko, D; Michael Poirier, M; Samuel Fink, S

2009-01-01T23:59:59.000Z

105

Understanding the Dynamics Behind the Photoisomerization of a Light-Driven Fluorene Molecular Rotary Motor  

Science Journals Connector (OSTI)

In the present contribution we report a combined quantum chemical and molecular dynamics study of the mechanism of the rotational cycle of the fluorene-based molecular rotary motor 9-(2,4,7-trimethyl-2,3-dihydro-1H-inden-1-ylidene)-9H-fluorene (1). ... (41) The theoretical results obtained hold considerable implications in achieving a rational synthetic design of future molecular motors with application defined functionality. ...

Andranik Kazaryan; Jos C. M. Kistemaker; Lars V. Scha?fer; Wesley R. Browne; Ben L. Feringa; Michael Filatov

2010-03-29T23:59:59.000Z

106

Manipulator having thermally conductive rotary joint for transferring heat from a test specimen  

DOE Patents (OSTI)

A manipulator for rotatably moving a test specimen in an ultra-high vacuum chamber includes a translational unit movable in three mutually perpendicular directions. A manipulator frame is rigidly secured to the translational unit for rotatably supporting a rotary shaft. A first copper disc is rigidly secured to an end of the rotary shaft for rotary movement within the vacuum chamber. A second copper disc is supported upon the first disc. The second disc receives a cryogenic cold head and does not rotate with the first disc. A sapphire plate is interposed between the first and second discs to prevent galling of the copper material while maintaining high thermal conductivity between the first and second discs. A spring is disposed on the shaft to urge the second disc toward the first disc and compressingly engage the interposed sapphire plate. A specimen mount is secured to the first disc for rotation within the vacuum chamber. The specimen maintains high thermal conductivity with the second disc receiving the cryogenic transfer line.

Haney, Steven J. (Tracy, CA); Stulen, Richard H. (Livermore, CA); Toly, Norman F. (Livermore, CA)

1985-01-01T23:59:59.000Z

107

Pitch deviation measurement of an involute spur gear by a rotary profiling system  

Science Journals Connector (OSTI)

Abstract This paper presents surface-profiling based gear pitch deviation measurement for an involute spur gear. A rotary profiling system, which consists of an air-bearing spindle and a displacement sensor with a diamond stylus, is employed to measure gear pitch deviation. In measurement of gear pitch deviation, an eccentric error between a gear axis and a motion axis of the rotary stage in the profiling system would affect accuracy of gear profile measurement. In this paper, at first, the influence of the eccentric error on measurement of gear pitch deviation is estimated in computer simulation based on a geometric model of the profiling system. After that, a new scanning method named “opposite-direction dual scanning method” is proposed so that a steep profile of gear flank surface with a local slope of up to 90° can be measured by the developed rotary profiling system. For compensating distortions in the measured gear tooth profile, which are induced not only by the eccentric error but also by a probe offset introduced by the proposed scanning method, a self-calibration and compensation method is applied. To verify the feasibility of the proposed method, measurement of gear pitch deviation of a master involute spur gear with a certificate data is carried out. Measurement uncertainty of the proposed method is also analyzed.

Bin Xu; Yuki Shimizu; So Ito; Wei Gao

2014-01-01T23:59:59.000Z

108

Comparative analysis of core drilling and rotary drilling in volcanic terrane  

SciTech Connect

Initially, the goal of this report is to compare and contrast penetration rates of rotary-mud drilling and core drilling in young volcanic terranes. It is widely recognized that areas containing an abundance of recent volcanic rocks are excellent targets for geothermal resources. Exploration programs depend heavily upon reliable subsurface information, because surface geophysical methods may be ineffective, inconclusive, or both. Past exploration drilling programs have mainly relied upon rotary-mud rigs for virtually all drilling activity. Core-drilling became popular several years ago, because it could deal effectively with two major problems encountered in young volcanic terranes: very hard, abrasive rock and extreme difficulty in controlling loss of circulation. In addition to overcoming these difficulties, core-drilling produced subsurface samples (core) that defined lithostratigraphy, structure and fractures far better than drill-chips. It seemed that the only negative aspect of core drilling was cost. The cost-per-foot may be two to three times higher than an ''initial quote'' for rotary drilling. In addition, penetration rates for comparable rock-types are often much lower for coring operations. This report also seeks to identify the extent of wireline core drilling (core-drilling using wireline retrieval) as a geothermal exploration tool. 25 refs., 21 figs., 13 tabs.

Flynn, T.; Trexler, D.T.; Wallace, R.H. Jr. (ed.)

1987-04-01T23:59:59.000Z

109

U. S. S. R. turbodrilling ROP exceeds U. S. rotary rate  

SciTech Connect

It is common practice in the U.S.S.R. to evaluate drilling estimates by a mere comparison of the footage drilled on a per-rig, per-month basis because the figure integrates the techniques, technology, and management used. According to this approach, the rate of penetration (ROP) in the U.S.S.R. is 2.3-2.8 times less than that in the U.S. Based on the statistics published in the Neftanaya Promyishlennost annual, in 1988 the average rotary drilling rate in the U.S. was 4,404 m (14,440 ft)/rig/month (this figure in the U.S. annual footage drilled by all rotary rigs divided by the annual average rig count and converted from yearly to monthly figures), and in the U.S.S.R. it was 1,595 m (5,233 ft)/rig/month. This type of comparison is misleading because the drilling areas in the two countries differ greatly in geographic, geologic, and climatic characteristics. The same holds true for comparisons of average well depths. The preceeding characteristics influence drilling estimates differently. The most difficult task is to evaluate these factors as an average in each country. Our approach to the comparison takes into account only the average footage drilled for each country. In the U.S.S.R. more than 85% of the wells are drilled with turbodrills, and in the U.S. most wells (approximately 80%) are rotary drilled.

Pogarskiy, A.A.; Yasashin, A.M. (All Union Scientific and Research Inst. for Organization, Management, and Economics of Oil and Gas Industry, Moscow (SU))

1991-06-03T23:59:59.000Z

110

Manipulator having thermally conductive rotary joint for transferring heat from a test specimen  

DOE Patents (OSTI)

A manipulator for rotatably moving a test specimen in an ultra-high vacuum chamber includes a translational unit movable in three mutually perpendicular directions. A manipulator frame is rigidly secured to the translational unit for rotatably supporting a rotary shaft. A first copper disc is rigidly secured to an end of the rotary shaft for rotary movement within the vacuum chamber. A second copper disc is supported upon the first disc. The second disc receives a cryogenic cold head and does not rotate with the first disc. The second disc receives a cryogenic cold head and does not rotate with the first disc. A sapphire plate is interposed between the first and second discs to prevent galling of the copper material while maintaining high thermal conductivity between the first and second discs. A spring is disposed on the shaft to urge the second disc toward the first disc and compressingly engage the interposed sapphire plate. A specimen mount is secured to the first disc for rotation within the vacuum chamber. The specimen maintains high thermal conductivity with the second disc receiving the cryogenic transfer line.

Haney, S.J.; Stulen, R.H.; Toly, N.F.

1983-05-03T23:59:59.000Z

111

History Overview of Solid-State Lighting - History  

NLE Websites -- All DOE Office Websites (Extended Search)

Condensed History of Lighting | Review Articles | FAQs | Condensed History of Lighting | Review Articles | FAQs | Documents Archive | CONDENSED HISTORY OF LIGHTING Figure courtesy of Jeff Tsao; a version of this figure was published in IEEE Circuits and Devices Vol 20, No 3, pp 28-37, May/June, 2004 Lighting technologies are substitutes for sunlight in the 425-675 nm spectral region where sunlight is most concentrated and to which the human eye has evolved to be most sensitive. The history of lighting can be viewed as the development of increasingly efficient technologies for creating visible light inside, but not wasted light outside, of that spectral region. A 200-year perspective on that history is shown in the figure above. The left axis indicates luminous efficacy, in units of lumens (a measure of light which factors in the human visual response to various wavelengths) per watt. The right axis indicates the corresponding power-conversion efficiency for a tri-LED tri-color white light source with moderate color rendering (CRI=80) and relatively warm color temperature (CCT=3900K). For such a source, 400lm/W would correspond to 100% power-conversion efficiency.

112

SearchHistoryShopper Last Updated 10/23/2013 lks  

E-Print Network (OSTI)

invoices. · View the status of documents. · Search by Requester name using advanced search. History Search.......................................................................................................................................11 Advanced search.........................................................................................................................................................................12 Advanced search

Shull, Kenneth R.

113

Archives and History Office: Oral History  

NLE Websites -- All DOE Office Websites (Extended Search)

Oral History Oral History Oral History Oral History interviews with SLAC staff and users have been conducted at SLAC and at other institutions by SLAC Archives and History Office staff and by others interested in the history of physics and computing. Information collected in these interviews supplements original correspondence and other primary source materials collected by the Archives and History Office. SLAC Interviews Interviews have been conducted by SLAC staff on an irregular basis, as resources have permitted. The Archives and History Office staff are currently working on a project to identify all past interview subjects, locate interview tapes and permission forms, and create interview transcripts. Our holdings contain tapes or transcripts of interviews with the following staff members and users:

114

User_ViewRecords  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

User Records User Records © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Viewing User Records Purpose The purpose of this job aid is to guide users through the step-by-step process of viewing their records. Each task demonstrates viewing of different records. Task A. View To-Do List Enter the web address (URL) of the user application into your browser Address field and press the Enter key. Enter your user ID in the User ID textbox. Enter your password in the Password textbox. Click Sign In. View To-Do List (filter, view) 7 Steps Task A View Completed Work 8 Steps Task B View Curriculum Status and Details 11 Steps Task C 3 3 1 2 2 1 SuccessFactors Learning v 6.4 User Job Aid Viewing User Records

115

Internalizing Native American History: Comprehending Cherokee and Muscogulge Identities  

E-Print Network (OSTI)

indigenous societies to be used as models to interpret history from the native point of view. The example used here involves the reconstruction of Cherokee and Muscogulge societies by examining the center of their socio-political systems, the clan...

Haggard, Dixie Ray

2000-09-01T23:59:59.000Z

116

ESnet IPv6 History  

NLE Websites -- All DOE Office Websites (Extended Search)

History Engineering Services The Network OSCARS Fasterdata IPv6 Network IPv6 Implementation Checklist ESnet IPv6 Mirror Servers ESnet IPv6 History ESnet supports Sandia and APNIC...

117

Idaho National Laboratory History  

NLE Websites -- All DOE Office Websites (Extended Search)

Area Attractions and Events Area Geography Area History Area Links Driving Directions Idaho Falls Attractions and Events INL History INL Today Research Park Sagebrush Steppe...

118

Southeast Idaho History  

NLE Websites -- All DOE Office Websites (Extended Search)

Area Attractions and Events Area Geography Area History Area Links Driving Directions Idaho Falls Attractions and Events INL History INL Today Research Park Sagebrush Steppe...

119

Lake View Geothermal Facility | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Lake View Geothermal Facility Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Lake View Geothermal Facility General Information Name Lake View Geothermal Facility Facility Lake View Sector Geothermal energy Location Information Location The Geysers, California Coordinates 38.823527148671°, -122.78173327446° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.823527148671,"lon":-122.78173327446,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

120

Driven dynamics and rotary echo of a qubit tunably coupled to a harmonic oscillator  

E-Print Network (OSTI)

We have investigated the driven dynamics of a superconducting flux qubit that is tunably coupled to a microwave resonator. We find that the qubit experiences an oscillating field mediated by off-resonant driving of the resonator, leading to strong modifications of the qubit Rabi frequency. This opens an additional noise channel, and we find that low-frequency noise in the coupling parameter causes a reduction of the coherence time during driven evolution. The noise can be mitigated with the rotary-echo pulse sequence, which, for driven systems, is analogous to the Hahn-echo sequence.

Gustavsson, Simon; Yan, Fei; Forn-Díaz, Pol; Bolkhovsky, Vlad; Braje, Danielle; Fitch, George; Harrabi, Khalil; Lennon, Donna; Miloshi, Jovi; Murphy, Peter; Slattery, Rick; Spector, Steven; Turek, Ben; Weir, Terry; Welander, Paul B; Yoshihara, Fumiki; Cory, David G; Nakamura, Yasunobu; Orlando, Terry P; Oliver, William D

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

A model of stepping kinetics for rotary enzymes. Application to the F1-ATPase  

Science Journals Connector (OSTI)

Our simple kinetic model, based on the classic “binding change mechanism”, describes the stepping kinetics for the rotary enzyme motors. The model shows that the cooperative interactions between active sites in the motor enzyme F1-ATPase induce the stepping product release. This phenomenon results from non-harmonic oscillations in the enzyme forms. The found rate constants, corresponding to the stepping phenomenon, are close to the rate constants known for the F1-ATPase. The duration of dwells during the product release is shown to depend on the ATP concentration in accordance with the known experimental data.

B.N. Goldstein; A.M. Aksirov; D.T. Zakrjevskaya

2011-01-01T23:59:59.000Z

122

Development of a Rotary Micro-filter for Radioactive Waste Applications  

SciTech Connect

The processing rates of Savannah River Site (SRS) high-level waste decontamination processes are limited by the flow rate of the solid-liquid separation. The baseline process, using a 0.1 micron cross-flow filter, produces {approx}1.36 x 10{sup -5} m/s ({approx}0.02 gpm/ft{sup 2}) of filtrate under expected operating conditions. Savannah River National Laboratory (SRNL) demonstrated significantly higher filter flux for actual waste samples using a small-scale rotary filter. With funding from the U. S. Department of Energy Office of Cleanup Technology, SRNL personnel are evaluating and developing the rotary micro-filter for radioactive service at SRS. The authors improved the design for the disks and filter unit to make them suitable for high-level radioactive service. They procured two units using the new design, tested them with simulated SRS wastes, and evaluated the operation of the units. Work to date provides the following conclusions and program status. - The authors modified the design of the filter disks to remove epoxy and Ryton{sup R}. The new design includes welding both stainless steel and ceramic coated stainless steel filter media to a stainless steel support plate. The welded disks were tested in the full-scale unit. They showed good reliability and met filtrate quality requirements. - The authors modified the design of the unit, making installation and removal easier. The new design uses a modular, one-piece filter stack that is removed simply by disassembly of a flange on the upper (inlet) side of the filter housing. All seals and rotary unions are contained within the removable stack. - While it is extremely difficult to predict the life of the seal, the vendor representative indicates a minimum of one year in present service conditions is reasonable. Changing the seal face material from silicon-carbide to a graphite-impregnated silicon-carbide is expected to double the life of the seal. Replacement of the current seal with an air seal could increase the lifetime to 5 years and is undergoing testing in the current work. - The bottom bushing showed wear due to a misalignment during the manufacture of the filter tank. Replacing the graphite bushing with a more wear resistant material such as a carbide material will increase the lifetime of the bushing. This replacement requires a more wear resistant part or coating to prevent excessive wear of the shaft. The authors are currently conducting testing with the more wear resistant bushing. - The project team plans to use the rotary micro-filter as a filter in advance of an ion exchange process under development for potential deployment in SRS waste tank risers. (authors)

Poirier, M.R.; Herman, D.T.; Fink, S.D. [Savannah River National Laboratory, Aiken, SC (United States)

2008-07-01T23:59:59.000Z

123

A stochastic penetration rate model for rotary drilling in surface mines  

Science Journals Connector (OSTI)

Abstract Principal Component Analysis (PCA) is used to determine the most effective parameters on the rock mass penetrability by considering their variance ratio in the first principal component. A model is developed for the prediction of rotary drills penetration rate using non-linear multiple regression analysis. Distribution functions for the effective parameters are calculated using measured data from two case studies. Applying the developed penetration rate model, a stochastic analysis is carried out using the Monte Carlo simulation. The proposed method provides a simple and effective assessment of the variability of the penetration rate model and its dependent parameters. Results showed that the PCA and Monte Carlo are suitable techniques for modeling and assessing the variability of rock mass penetrability parameters. According to the developed distribution model, with 90% of confidence level the penetration rate values range 0.2–2.5 m/min, which shows the wide possible range of penetration rates for rotary drilling especially in sedimentary (limestone and sandstone bearing magnetite mineral of Golgohar mine) and Sarcheshmeh igneous porphyry rock masses.

Omid Saeidi; Seyed Rahman Torabi; Mohammad Ataei; Jamal Rostami

2014-01-01T23:59:59.000Z

124

Thermal modeling of core sampling in flammable gas waste tanks. Part 2: Rotary-mode sampling  

SciTech Connect

The radioactive waste stored in underground storage tanks at Hanford site includes mixtures of sodium nitrate and sodium nitrite with organic compounds. The waste can produce undesired violent exothermic reactions when heated locally during the rotary-mode sampling. Experiments are performed varying the downward force at a maximum rotational speed of 55 rpm and minimum nitrogen purge flow of 30 scfm. The rotary drill bit teeth-face temperatures are measured. The waste is simulated with a low thermal conductivity hard material, pumice blocks. A torque meter is used to determine the energy provided to the drill string. The exhaust air-chip temperature as well as drill string and drill bit temperatures and other key operating parameters were recorded. A two-dimensional thermal model is developed. The safe operating conditions were determined for normal operating conditions. A downward force of 750 at 55 rpm and 30 scfm nitrogen purge flow was found to yield acceptable substrate temperatures. The model predicted experimental results reasonably well. Therefore, it could be used to simulate abnormal conditions to develop procedures for safe operations.

Unal, C.; Poston, D.; Pasamehmetoglu, K.O. [Los Alamos National Lab., NM (United States). Nuclear Systems Design and Analysis Group; Witwer, K.S. [Westinghouse Hanford Co., Richland, WA (United States). Engineering Testing Lab.

1997-08-01T23:59:59.000Z

125

Operability test procedure for rotary mode core sampling system {number_sign}3  

SciTech Connect

This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 3. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 3, will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ``Rock Slinger`` test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Farris, T.R.; Jarecki, T.D.

1995-04-26T23:59:59.000Z

126

Operability test procedure for rotary mode core sampling system {number_sign}4  

SciTech Connect

This document gives instructions for the Operability Testing of the Rotary Mode Core Sampling (RMCS) System No. 4. This document is based on the Operability Test Procedure for RMCS system No. 2 because the basic design is the same for all three systems. Modifications have been made from the original design only when exact duplication was not feasible or design improvements could be incorporated without affecting the operation of the system. Operability testing of the Rotary Mode Core Sampling System No. 4 will verify that functional and operational requirements have been met. Testing will be completed in two phases. The first phase of testing (section 7) will involve operating the truck equipment to demonstrate its capabilities. The second phase of testing (section 8) will take repeated samples in a simulated operation environment. These tests will be conducted at the ``Rock Slinger`` test site located just south of U-Plant in the 200 West Area. Tests will be done in a simulated tank farm environment. All testing will be non-radioactive and stand-in materials shall be used to simulate waste tank conditions. Systems will be assembled and arranged in a manner similar to that expected in the field.

Farris, T.R.; Jarecki, T.D.

1995-04-26T23:59:59.000Z

127

Baseline Design Compliance Matrix for the Rotary Mode Core Sampling System  

SciTech Connect

The purpose of the design compliance matrix (DCM) is to provide a single-source document of all design requirements associated with the fifteen subsystems that make up the rotary mode core sampling (RMCS) system. It is intended to be the baseline requirement document for the RMCS system and to be used in governing all future design and design verification activities associated with it. This document is the DCM for the RMCS system used on Hanford single-shell radioactive waste storage tanks. This includes the Exhauster System, Rotary Mode Core Sample Trucks, Universal Sampling System, Diesel Generator System, Distribution Trailer, X-Ray Cart System, Breathing Air Compressor, Nitrogen Supply Trailer, Casks and Cask Truck, Service Trailer, Core Sampling Riser Equipment, Core Sampling Support Trucks, Foot Clamp, Ramps and Platforms and Purged Camera System. Excluded items are tools such as light plants and light stands. Other items such as the breather inlet filter are covered by a different design baseline. In this case, the inlet breather filter is covered by the Tank Farms Design Compliance Matrix.

LECHELT, J.A.

2000-10-17T23:59:59.000Z

128

OIL & GAS HISTORY 1 History in California  

E-Print Network (OSTI)

OIL & GAS HISTORY 1 History in California 4 Superior figures refer to references at the end of the essay. OIL AND GAS PRODUCTION California oil was always a valued commodity. When the Spanish explorers landed in California in the 1500s, they found Indians gathering asphaltum (very thick oil) from natural

129

Stress intensity factors and fatigue growth of a surface crack in a drill pipe during rotary drilling operation  

E-Print Network (OSTI)

known that drill pipe fatigue in oil-gas drilling operations represents more than 30% of the drill pipeStress intensity factors and fatigue growth of a surface crack in a drill pipe during rotary drilling operation Ngoc Ha Daoa, , Hedi Sellamia aMines ParisTech, 35 rue Saint-Honoré, 77305 Fontainebleau

Paris-Sud XI, Université de

130

Design Review Report for formal review of safety class features of exhauster system for rotary mode core sampling  

SciTech Connect

Report documenting Formal Design Review conducted on portable exhausters used to support rotary mode core sampling of Hanford underground radioactive waste tanks with focus on Safety Class design features and control requirements for flammable gas environment operation and air discharge permitting compliance.

JANICEK, G.P.

2000-06-08T23:59:59.000Z

131

A finite volume method and experimental study of a stator of a piezoelectric traveling wave rotary ultrasonic motor  

E-Print Network (OSTI)

circuit for the stator of a piezo- electric traveling wave rotary ultrasonic motor is presented ultrasonic motor V. Bolborici a, , F.P. Dawson b , M.C. Pugh c a University of Texas at El Paso, Department of Electrical and Computer Engineering, 500 W. University Ave., El Paso, TX 79968, USA b University of Toronto

Pugh, Mary

132

Combustion of high-sulfur coal and anthracite wastes in a rotary kiln combustor with an advanced internal air distributor  

SciTech Connect

Fluid bed combustors have received extensive testing with both high-sulfur coal and anthracite wastes. Rotary kilns are effective and popular devices for waste combustion. The Angelo Rotary Furnace{trademark} has been developed to improve the operation of rotary pyrolyzer/combustor systems through enhanced air distribution, which in this process is defined as staged, swirled combustion air injection. Fourteen of these new furnaces have been installed worldwide. Two units in Thailand, designed for rice hull feed with occasional lignite feed, have been recently started up. An older unit in Pennsylvania is being upgraded with a new, more advanced air distribution system for a series of tests this fall in which inexpensive high-sulfur coal and anthracite wastes will be fired with limestone. The purposes of these tests are to determine the burning characteristics of these two fuels in this system, to discover the Ca/S ratios necessary for operation of a rotary kiln combusting these fuels, and to observe the gas-borne emissions from the furnace. An extensive preliminary design study will be performed on a commercial installation for combustion of anthracite wastes. 14 refs., 5 figs., 1 tab.

Cobb, J.T. Jr. (Pittsburgh Univ., PA (USA)); Ahn, Y.K. (Gilbert/Commonwealth, Inc., Reading, PA (USA)); Angelo, J.F. (Universal Energy International, Inc., Little Rock, AR (USA))

1990-01-01T23:59:59.000Z

133

BID NO: SKA SSLE 009/2011 SUPPLY, DELIVERY AND INSTALLATION OF ROTARY UPS, MV INDOOR SWITCHGEAR AND  

E-Print Network (OSTI)

, and dry-type power transformers only ­ no alternative offers in this regard will be accepted. The contract SWITCHGEAR AND POWER TRANSFORMERS AT THE MeerKAT SITE NEAR CARNARVON, NORTHERN CAPE TENDER NOTICE and Installation of Rotary UPS, MV Indoor Switchgear and Power Transformers at the MeerKAT Site near Carnarvon

Jarrett, Thomas H.

134

Views on Automation  

Science Journals Connector (OSTI)

Views on Automation ... Industrial managements, he feels, must allay workers' fears by showing how they can take pride in the greater accomplishment of automated plants. ...

1957-07-29T23:59:59.000Z

135

Uganda: A Modern History  

E-Print Network (OSTI)

pages, hardcover,. $27.50. uganda; A Modern History. Jan J .contemporary history Qf Uganda. His work supplies us with aand integration of Uganda's economy into the World capita 1

Ssali, Ndugu Mike

1983-01-01T23:59:59.000Z

136

BLACK HISTORY MONTH  

Energy.gov (U.S. Department of Energy (DOE))

Black History Month is an annual celebration of achievements by black Americans and a time for recognizing the central role of African Americans in U.S. history. The event grew out of “Negro History Week,” created by historian Carter G. Woodson and other prominent African Americans. Other countries around the world, including Canada and the United Kingdom, also devote a month to celebrating black history.

137

A handbook of history  

Science Journals Connector (OSTI)

...February-March 1997 review-article Reviews A handbook of history P D Hingley Librarian of the RAS Burlington House...it all. REVIEWS February/March 1997 Vol 38 Issue1 32 A handbook of history Cambridge Illustrated History of Astronomy by......

P D Hingley

1997-01-01T23:59:59.000Z

138

NEWS & VIEWS Glass dynamics  

E-Print Network (OSTI)

NEWS & VIEWS Glass dynamics Diverging views on glass transition Gregory B. mc.mckenna@ttu.edu T he glass transition is one of the most intriguing phenomena in the world of soft condensed matter. Despite decades of study, many aspects of the behaviour of glass-forming liquids remain elusive

Weeks, Eric R.

139

News and Views  

Science Journals Connector (OSTI)

......Model 8600 and 8700 gas chromatographs to...untended operation of the gas chromatograph under...0325) 311044. 133 News and Views Macintosh-compatible...speed of the Apple drives and a software incompatibility...for a corporate 134 News and Views licence...that Chem-X was the natural choice: 'Chem-X......

Alan H. Fielding

1990-04-01T23:59:59.000Z

140

An estimation of the penetration rate of rotary drills using the Specific Rock Mass Drillability index  

Science Journals Connector (OSTI)

The main purpose of the present study was to provide a practical, convenient drillability prediction model based on rock mass characteristics, geological sampling from blast holes, and drill operational factors. Empirical equations that predict drill penetration rate have been developed using statistical analyses of data from the Sarcheshmeh Copper Mine. Seven parameters of the rock or rock mass, including uniaxial compressive strength (UCS) of the rock, Schmidt hammer hardness value, quartz content, fragment size (d80), alteration, and joint dip, are included in the model along with two operational parameters of the rotary drill, bit rotational speed and thrust. These parameters were used to predict values of the newly developed Specific Rock Mass Drillability (SRMD) index. Comparing measured SRMD values to those predicted by the multi-parameter linear, or nonlinear, regression models showed good agreement. The correlation coefficients were 0.82 and 0.81, respectively.

Alireza Cheniany; Khoshrou Seyed Hasan; Kourosh Shahriar; Jafar Khademi Hamidi

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Heat transfer and combustion characteristics of a burner with a rotary regenerative heat exchanger  

SciTech Connect

The authors have developed a Rotary Regenerative Combustion (RRX) System, which is coupled with a compact high efficiency regenerative air heat exchanger and a combustion burner. This system contributes to saving energy of fuel firing industrial furnaces and decreases NO{sub x} emission. This technology can be considered as a solution of greenhouse problem. This paper, discusses a compact high efficiency regenerative air heat exchanger in comparison with the existing types of regenerative burners and reverse firing with high momentum fuel jet (with motive fluid) in the furnace. This burner is compact in size, with high fuel efficiency, low NOx emission, easy to operate, and reliable, based on the results of field tests and commercial operations. The authors can say that the RRX system is a regenerative burner of the second generation.

Hirose, Yasuo; Kaji, Hitoshi; Arai, Norio

1998-07-01T23:59:59.000Z

142

New ultra-deepwater rig with dual rotaries will reduce costs  

SciTech Connect

The Discoverer Enterprise, a next generation, ultra-deepwater drill ship with a dual rotary system, will decrease drilling and completion costs by reducing bottom hole assembly (BHA) and tubular preparation time. Transocean Offshore received a contract from Amoco Corp. to build the ultra-deep floating rig and is scheduled to spud its first well in July 1998. It will generally work in water deeper than 6,000 ft. The rig design involves a new approach that addresses the overall well-construction process and equipment required to decrease significantly deepwater drilling time. The Discoverer is the first ultra-deepwater rig designed specifically for handling subsea completions and extended well tests. The paper discusses increased deepwater rig demand, rig construction costs, drillship design, well construction, development drilling, and cost justification.

Cole, J.C.; Herrmann, R.P.; Scott, R.J. [Transocean Offshore Inc., Houston, TX (United States); Shaughnessy, J.M. [Amoco Corp., Houston, TX (United States)

1997-05-26T23:59:59.000Z

143

Method and apparatus for maximizing throughput of indirectly heated rotary kilns  

DOE Patents (OSTI)

An apparatus and method for achieving improved throughput capacity of indirectly heated rotary kilns used to produce pyrolysis products such as shale oils or coal oils that are susceptible to decomposition by high kiln wall temperatures is disclosed. High throughput is achieved by firing the kiln such that optimum wall temperatures are maintained beginning at the point where the materials enter the heating section of the kiln and extending to the point where the materials leave the heated section. Multiple high velocity burners are arranged such that combustion products directly impact on the area of the kiln wall covered internally by the solid material being heated. Firing rates for the burners are controlled to maintain optimum wall temperatures.

Coates, Ralph L; Smoot, L. Douglas; Hatfield, Kent E

2012-10-30T23:59:59.000Z

144

Unsteady-state material balance model for a continuous rotary dissolver  

SciTech Connect

The unsteady-state continuous rotary dissolver material balance code (USSCRD) is a useful tool with which to study the performance of the rotary dissolver under a wide variety of operating conditions. The code does stepwise continuous material balance calculations around each dissolver stage and the digester tanks. Output from the code consists of plots and tabular information on the stagewise concentration profiles of UO{sub 2}, PuO{sub 2}, fission products, Pu(NO{sub 3}){sub 4}, UO{sub 2}(NO{sub 3}){sub 2}, fission product nitrates, HNO{sub 3}, H{sub 2}O, stainless steel, total particulate, and total fuel in pins. Other information about material transfers, stagewise liquid volume, material inventory, and dissolution performance is also provided. This report describes the development of the code, its limitations, key operating parameters, usage procedures, and the results of the analysis of several sets of operating conditions. Of primary importance in this work was the estimation of the steady-state heavy metal inventory in a 0.5-t/d dissolver drum. Values ranging from {similar_to}12 to >150 kg of U + Pu were obtained for a variety of operating conditions. Realistically, inventories are expected to be near the lower end of this range. Study of the variation of operating parameters showed significant effects on dissolver product composition from intermittent solids feed. Other observations indicated that the cycle times for the digesters and shear feed should be closely coupled in order to avoid potential problems with off-specification product. 19 references, 14 tables.

Lewis, B.E.

1984-09-01T23:59:59.000Z

145

Testing to expand the rotary mode core sampling system operating envelope  

SciTech Connect

Rotary sampling using the Rotary Mode Core Sampling System (RMCSS) is constrained by what is referred to as the ``Operating Envelope``. The Operating Envelop defines the maximum downward force, maximum rotational speed and minimum purge gas flow allowed during operation of the RMCSS. The original values of 1170 lb. down force, 55 RPM rotational speed, and 30 SCFM nitrogen purge gas were determined during original envelope testing. This envelope was determined by observing the temperature rise on the bitface while drilling into waste simulants. The maximum temperature in single-shell tanks (SSTS) is considered to be approximately 9O C and the critical drill bit temperature, which is the temperature at which an exothermic reaction could be initiated in the tank waste, was previously determined to be 150 C. Thus, the drill bit temperature increase was limited to 60 C. Thermal properties of these simulants approximated typical properties of waste tank saltcake. Later, more detailed envelope testing which used a pumice block simulant, showed a notably higher temperature rise while drilling. This pumice material, which simulated a ``worst case`` foreign object embedded in the waste, has lower thermal conductivity and lower thermal diffusivity than earlier simulants. These properties caused a slower heat transfer in the pumice than in the previous simulants and consequently a higher temperature rise. The maximum downward force was subsequently reduced to 750 lb (at a maximum 55 RPM and minimum 30 SCFM purge gas flow) which was the maximum value at which the drill bit could be operated and still remain below the 60 C temperature rise.

Witwer, K.S.

1998-01-21T23:59:59.000Z

146

American Institute of Aeronautics and Astronautics, Infotech@Aerospace Conference, Paper No. 2005-7077 A Small Semi-Autonomous Rotary-Wing Unmanned Air  

E-Print Network (OSTI)

-7077 1 A Small Semi-Autonomous Rotary-Wing Unmanned Air Vehicle (UAV) Scott D. Hanford* , Lyle N. Long such as the Fire Scout and Hummingbird currently have the capability to fly autonomously, land in a specific

147

Taking the long view  

NLE Websites -- All DOE Office Websites (Extended Search)

Taking the long view Taking the long view Taking the long view on environmental stewardship A newly articulated mission for environmental stewardship at the Laboratory can be summed up in a simple phrase: clean up the past, control current operations, and create a sustainable future. March 20, 2012 Los Alamos Aerial Aerial view of a canyon in Los Alamos, New Mexico. Contact Environmental Communication & Public Outreach P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email "The future viability of the Lab hinges on demonstrating to public that we protect human health and the environment." Environmental stewardship strategy looks 50 years into the future As a way of integrating environmental protection activities into a comprehensive strategy, Kevin Smith, manager of the U.S. Department of

148

History | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

About Energy.gov » History About Energy.gov » History History History The Department of Energy has one of the richest and most diverse histories in the Federal Government. Although only in existence since 1977, the Department traces its lineage to the Manhattan Project effort to develop the atomic bomb during World War II and to the various energy-related programs that previously had been dispersed throughout various Federal agencies. The Department has made available to researchers and the general public a rich variety of materials and information: Historical Resources, including published and online histories of the Department and its predecessor agencies and information on records, exhibits, museums, and tours available online and at various locations both within and outside the Department. Major publications and websites can be

149

NETL: Albany, Oregon History  

NLE Websites -- All DOE Office Websites (Extended Search)

Home > About NETL > History > Albany Research Center History Home > About NETL > History > Albany Research Center History About NETL Albany, Oregon History Albany Research Center has a history rich in successful materials research and development. It was on March 17, 1943 that President Franklin D. Roosevelt announced that the U. S. Bureau of Mines had selected a site in Albany, Oregon for the new Northwest Electro-development Laboratory. The original mission of the center was to find methods for using the abundant low-grade resources of the area, and to develop new metallurgical processes using the abundant electrical energy in the area. The name of the center was changed in 1945 to the Albany Metallurgy Research Center and was used through 1977 where the name was shortened to Albany Research Center. One of our first successes was the development

150

History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

About Energy.gov » History About Energy.gov » History History History The Department of Energy has one of the richest and most diverse histories in the Federal Government. Although only in existence since 1977, the Department traces its lineage to the Manhattan Project effort to develop the atomic bomb during World War II and to the various energy-related programs that previously had been dispersed throughout various Federal agencies. The Department has made available to researchers and the general public a rich variety of materials and information: Historical Resources, including published and online histories of the Department and its predecessor agencies and information on records, exhibits, museums, and tours available online and at various locations both within and outside the Department. Major publications and websites can be

151

Kristie Stremel Oral History  

E-Print Network (OSTI)

Under the Rainbow: Oral Histories of GLBTQ People in Kansas Kristie Stremel Oral History Part 1 video platform video management video solutionsvideo player Part 2 video platform video management video solutionsvideo player... Part 3 video platform video management video solutionsvideo player Part 4 video platform video management video solutionsvideo player Return to Kristie Stremel Oral History in KU ScholarWorks Tami Albin, Director for Under the Rainbow...

Stremel, Kristie; Albin, Tami

2009-10-27T23:59:59.000Z

152

High vacuum indirectly-heated rotary kiln for the removal and recovery of mercury from air pollution control scrubber waste  

SciTech Connect

SepraDyne corporation (Denton, TX, US) has conducted pilot-scale treatability studies of dewatered acid plant blowdown sludge generated by a copper smelter using its recently patented high temperature and high vacuum indirectly-heated rotary retort technology. This unique rotary kiln is capable of operating at internal temperatures up to 850 C with an internal pressure of 50 torr and eliminates the use of sweep gas to transport volatile substances out of the retort. By removing non-condensables such as oxygen and nitrogen at relatively low temperatures and coupling the process with a temperature ramp-up program and low temperature condensation, virtually all of the retort off-gases produced during processing can be condensed for recovery. The combination of rotation, heat and vacuum produce the ideal environment for the rapid volatilization of virtually all organic compounds, water and low-to-moderate boiling point metals such as arsenic, cadmium and mercury.

Hawk, G.G.; Aulbaugh, R.A. [Scientific Consulting Labs., Inc., Farmers Branch, TX (United States)] [Scientific Consulting Labs., Inc., Farmers Branch, TX (United States)

1998-12-31T23:59:59.000Z

153

System design specification for rotary mode core sample trucks No. 2, 3, and 4 programmable logic controller  

SciTech Connect

The system this document describes controls several functions of the Core Sample Truck(s) used to obtain nuclear waste samples from various underground storage tanks at Hanford. The system will monitor the sampling process and provide alarms and other feedback to insure the sampling process is performed within the prescribed operating envelope. The intended audience for this document is anyone associated with rotary or push mode core sampling. This document describes the Alarm and Control logic installed on Rotary Mode Core Sample Trucks (RMCST) {number_sign}2, 3, and 4. It is intended to define the particular requirements of the RMCST alarm and control operation (not defined elsewhere) sufficiently for detailed design to implement on a Programmable Logic Controller (PLC).

Dowell, J.L.; Akers, J.C.

1995-12-31T23:59:59.000Z

154

Coastal engineering, history of  

Science Journals Connector (OSTI)

Turner I.L., Leatherman S.P., 1997. Beach dewatering as a’ soft' engineering solution to coastal erosion – A history and critical review. J Coastal Res 13...

Per Bruun

1982-01-01T23:59:59.000Z

155

Surface Hopping Excited-State Dynamics Study of the Photoisomerization of a Light-Driven Fluorene Molecular Rotary Motor  

Science Journals Connector (OSTI)

Surface Hopping Excited-State Dynamics Study of the Photoisomerization of a Light-Driven Fluorene Molecular Rotary Motor ... The potential energy surfaces of the ground electronic state (S0) and the first singlet excited state (S1) are explored by semiempirical quantum-chemical calculations using the orthogonalization-corrected OM2 Hamiltonian in combination with a multireference configuration interaction (MRCI) treatment. ... Photoswitching of simple photochromic molecules attracts substantial attention because of its possible role in future photon-driven molecular electronics. ...

Andranik Kazaryan; Zhenggang Lan; Lars V. Schäfer; Walter Thiel; Michael Filatov

2011-05-24T23:59:59.000Z

156

Report on Testing to Expand the Rotary Mode Core Sampling Operating Envelope  

SciTech Connect

The Tank Waste Remediation System (TWRS) Characterization Equipment Group requested that the Numatec Hanford Corporation--Engineering Testing Laboratory (ETL) perform Rotary Mode Core Sampling (RMCS) Operating Envelope (OE) testing. This testing was based upon Witwer 1998a and was performed at different time periods between May and September 1998. The purpose of this testing was to raise the maximum down force limit for rotary mode core sampling as outlined in the current OE. If testing could show that a higher down force could be used while drilling into a concrete/pumice block simulant while still remaining below the 60 C limitation, then the current OE could be revised to include the new, higher, down force limit. Although the Test Plan discussed varying the purge flow rate and rotation rate to find ''optimal'' drilling conditions, the number of drill bits that could be destructively tested was limited. Testing was subsequently limited in scope such that only the down force would be varied while the purge flow rate and rotation rate were kept constant at 30 scfm and 55 rpm respectively. A second objective, which was not part of the original test plan, was added prior to testing. The Bit Improvement testing, mentioned previously, revealed that the drill bits tested in the OE testing were made of a slightly different metal matrix than the ones currently used. The older bits, a Longyear part number 100IVD/5 (/5 bit), had tungsten carbide mixed into the metal matrix that forms the cutting teeth. The currently used bits, Longyear part number 100IVD/8 (/8 bit), instead have tungsten metal in the matrix and no tungsten carbide. Rockwell C hardness testing showed that the /5 bit was significantly harder than the /8 bit, with values of /8 vs. 8, respectively. The change from the /5 bit to the /8 bit was made immediately after the previous OE testing in 1996 because of sparking concerns with the tungsten carbide in the /5 bit. This difference in hardness between the two bit materials was discovered in the Bit Improvement Testing and was expected to affect this OE testing. The second objective, therefore, was to quantify what affect this change in material had and define the OE, based on the current /8 bit design rather than the old /5 bit design.

BOGER, R.M.

1999-12-13T23:59:59.000Z

157

History of Astronomy  

Science Journals Connector (OSTI)

... pages Prof. G. Abetti gives the reader a straightforward summary of the history of astronomy. As he remarks in the preface, a book of this size "can be ... the history and civilization of the peoples of the Earth". First we have ancient astronomy, which can be traced back to about forty centuries before Christ and which can ...

W. M. H. GREAVES

1955-08-20T23:59:59.000Z

158

David Ollington Oral History  

E-Print Network (OSTI)

Under the Rainbow: Oral Histories of GLBTQ People in Kansas David Ollington Oral History Part 1 video platform video management video solutionsvideo player Part 2 video platform video management video solutionsvideo player... Part 3 video platform video management video solutionsvideo player Part 4 video platform video management video solutionsvideo player Part 5 video platform video management video solutionsvideo player Return to David Ollington...

Ollington, David; Albin, Tami

2010-01-11T23:59:59.000Z

159

George Paris Oral History  

E-Print Network (OSTI)

Part 3 video platform video management video solutionsvideo player Part 4 video platform video management video solutionsvideo player Part 5 video platform video management video solutionsvideo player Part 6 video platform video... Under the Rainbow: Oral Histories of GLBTQ People in Kansas George Paris Oral History Part 1 video platform video management video solutionsvideo player Part 2 video platform video management video solutionsvideo player...

Paris, George; Albin, Tami

2010-01-11T23:59:59.000Z

160

Steven Brown Oral History  

E-Print Network (OSTI)

Part 4 video platform video management video solutionsvideo player Part 5 video platform video management video solutionsvideo player Part 6 video platform video management video solutionsvideo player Part 7 video platform video... Under the Rainbow: Oral Histories of GLBTQ People in Kansas Steven Brown Oral History Part 2 video platform video management video solutionsvideo player Part 3 video platform video management video solutionsvideo player...

Brown, Steven; Albin, Tami

2010-11-24T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Microscale acceleration history discriminators  

DOE Patents (OSTI)

A new class of micromechanical acceleration history discriminators is claimed. These discriminators allow the precise differentiation of a wide range of acceleration-time histories, thereby allowing adaptive events to be triggered in response to the severity (or lack thereof) of an external environment. Such devices have applications in airbag activation, and other safety and surety applications.

Polosky, Marc A. (Albuquerque, NM); Plummer, David W. (Albuquerque, NM)

2002-01-01T23:59:59.000Z

162

A handbook of history  

Science Journals Connector (OSTI)

......review-article Reviews A handbook of history P D Hingley...professional astronomy. This does not mean that it skimps...1997 Vol 38 Issue1 32 A handbook of history Cambridge Illustrated...this magnificent new work does not totally replace the......

P D Hingley

1997-01-01T23:59:59.000Z

163

Mosquito Life Histories  

NLE Websites -- All DOE Office Websites (Extended Search)

Life Histories Life Histories Nature Bulletin No. 682 June 2, 1962 Forest Preserve District of Cook County John J. Duffy, President David H. Thompson, Senior Naturalist MOSQUITO LIFE HISTORIES Everybody knows that a mosquito is a small, long-legged insect that bites. However, there are many kinds of them each with its own peculiarities of life history and habits. Some are produced in marshes or in flood plains of streams, some in puddles, some in woodlands, and others in cities and towns. Here in the Chicago region, although mosquito-borne diseases are no longer a danger, they become nuisances in many places at certain times in almost every year. In times past and in many countries the mosquitoes which carried malaria, yellow fever and other infections shaped the course of history. Hundreds of scientists have studied them for years but much remains to be learned.

164

Prarie View RDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PRAIRIE VIEW RDF PRAIRIE VIEW RDF 2 Prairie View RDF  Located at JAAP (approx. 40 miles southwest of Chicago), 223 acres on 455 Acre Parcel  Will County Owner; Waste Management, Operator  Maximum 23-Year Life WM/Will County Methane to Energy Plant  Landfill Contract Signed w/WM in 1997 w/Gas-to- Energy Plant Clause  County Retains Gas Rights &WM Installs Gas Collection System  WM owns Methane to Energy Plant &Tax Credits 3 CONTRACT PHASE  DOE Grant Applied 6/09  County Board Approves DOE EECBG Strategy 11/09  1 Million DOE Funds to Methane to Energy Plant  Schiff Harden Hired to Negotiate Gas to Energy Contract  February 2010 County Board Authorizes Contract Execution 4 5 METHANE TO ENERGY PLANT DETAILS  Waste Management Required To

165

View dependent fluid dynamics  

E-Print Network (OSTI)

VIEW DEPENDENT FLUID DYNAMICS A Thesis by BRIAN ARTHUR BARRAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE May 2006 Major Subject: Visualization... Sciences VIEW DEPENDENT FLUID DYNAMICS A Thesis by BRIAN ARTHUR BARRAN Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE Approved by: Chair of Committee, Donald...

Barran, Brian Arthur

2006-08-16T23:59:59.000Z

166

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method of destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500.degree. C. to heat the particulate material to a temperature in the range of from about 200.degree. C. to about 900.degree. C. in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, Michael J. (Bolingbrook, IL); Arzoumanidis, Gregory G. (Naperville, IL)

1997-01-01T23:59:59.000Z

167

A method and system including a double rotary kiln pyrolysis or gasification of waste material  

SciTech Connect

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet.

McIntosh, M.J.; Arzoumanidis, G.G.

1995-12-31T23:59:59.000Z

168

Method and system including a double rotary kiln pyrolysis or gasification of waste material  

DOE Patents (OSTI)

A method is described for destructively distilling an organic material in particulate form wherein the particulates are introduced through an inlet into one end of an inner rotating kiln ganged to and coaxial with an outer rotating kiln. The inner and outer kilns define a cylindrical annular space with the inlet being positioned in registry with the axis of rotation of the ganged kilns. During operation, the temperature of the wall of the inner rotary kiln at the inlet is not less than about 500 C to heat the particulate material to a temperature in the range of from about 200 C to about 900 C in a pyrolyzing atmosphere to reduce the particulate material as it moves from the one end toward the other end. The reduced particulates including char are transferred to the annular space between the inner and the outer rotating kilns near the other end of the inner rotating kiln and moved longitudinally in the annular space from near the other end toward the one end in the presence of oxygen to combust the char at an elevated temperature to produce a waste material including ash. Also, heat is provided which is transferred to the inner kiln. The waste material including ash leaves the outer rotating kiln near the one end and the pyrolysis vapor leaves through the particulate material inlet. 5 figs.

McIntosh, M.J.; Arzoumanidis, G.G.

1997-09-02T23:59:59.000Z

169

Prognostics and health management design for rotary machinery systems—Reviews, methodology and applications  

Science Journals Connector (OSTI)

Abstract Much research has been conducted in prognostics and health management (PHM), an emerging field in mechanical engineering that is gaining interest from both academia and industry. Most of these efforts have been in the area of machinery PHM, resulting in the development of many algorithms for this particular application. The majority of these algorithms concentrate on applications involving common rotary machinery components, such as bearings and gears. Knowledge of this prior work is a necessity for any future research efforts to be conducted; however, there has not been a comprehensive overview that details previous and on-going efforts in PHM. In addition, a systematic method for developing and deploying a PHM system has yet to be established. Such a method would enable rapid customization and integration of PHM systems for diverse applications. To address these gaps, this paper provides a comprehensive review of the PHM field, followed by an introduction of a systematic PHM design methodology, 5S methodology, for converting data to prognostics information. This methodology includes procedures for identifying critical components, as well as tools for selecting the most appropriate algorithms for specific applications. Visualization tools are presented for displaying prognostics information in an appropriate fashion for quick and accurate decision making. Industrial case studies are included in this paper to show how this methodology can help in the design of an effective PHM system.

Jay Lee; Fangji Wu; Wenyu Zhao; Masoud Ghaffari; Linxia Liao; David Siegel

2014-01-01T23:59:59.000Z

170

Apparatus and methods for cooling and sealing rotary helical screw compressors  

DOE Patents (OSTI)

In a compression system which incorporates a rotary helical screw compressor, and for any type of gas or refrigerant, the working liquid oil is atomized through nozzles suspended in, and parallel to, the suction gas flow, or alternatively the nozzles are mounted on the suction piping. In either case, the aim is to create positively a homogeneous mixture of oil droplets to maximize the effectiveness of the working liquid oil in improving the isothermal and volumetric efficiencies. The oil stream to be atomized may first be degassed at compressor discharge pressure by heating within a pressure vessel and recovering the energy added by using the outgoing oil stream to heat the incoming oil stream. The stripped gas is typically returned to the compressor discharge flow. In the preferred case, the compressor rotors both contain a hollow cavity through which working liquid oil is injected into channels along the edges of the rotors, thereby forming a continuous and positive seal between the rotor edges and the compressor casing. In the alternative method, working liquid oil is injected either in the same direction as the rotor rotation or counter to rotor rotation through channels in the compressor casing which are tangential to the rotor edges and parallel to the rotor center lines or alternatively the channel paths coincide with the helical path of the rotor edges. 14 figs.

Fresco, A.N.

1997-08-05T23:59:59.000Z

171

Apparatus and methods for cooling and sealing rotary helical screw compressors  

DOE Patents (OSTI)

In a compression system which incorporates a rotary helical screw compressor, and for any type of gas or refrigerant, the working liquid oil is atomized through nozzles suspended in, and parallel to, the suction gas flow, or alternatively the nozzles are mounted on the suction piping. In either case, the aim is to create positively a homogeneous mixture of oil droplets to maximize the effectiveness of the working liquid oil in improving the isothermal and volumetric efficiencies. The oil stream to be atomized may first be degassed at compressor discharge pressure by heating within a pressure vessel and recovering the energy added by using the outgoing oil stream to heat the incoming oil stream. The stripped gas is typically returned to the compressor discharge flow. In the preferred case, the compressor rotors both contain a hollow cavity through which working liquid oil is injected into channels along the edges of the rotors, thereby forming a continuous and positive seal between the rotor edges and the compressor casing. In the alternative method, working liquid oil is injected either in the same direction as the rotor rotation or counter to rotor rotation through channels in the compressor casing which are tangential to the rotor edges and parallel to the rotor centerlines or alternatively the channel paths coincide with the helical path of the rotor edges.

Fresco, Anthony N. (P.O. Box 734, Upton, NY 11973)

1997-01-01T23:59:59.000Z

172

News and Views  

Science Journals Connector (OSTI)

... -16. The discussions on road lighting, from the point of view both of the pedestrian and the car driver, were valuable, as they show how complex the problem is ... problem is, depending as it does on difficult questions of physiology and psychology. The pedestrian wants to see small obstructions on the road and the numbers on the houses; ...

1928-07-28T23:59:59.000Z

173

ParaView at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

ParaView ParaView ParaView Introduction ParaView is an open-source, multi-platform data analysis and visualization application. ParaView users can quickly build visualizations to analyze their data using qualitative and quantitative techniques. The data exploration can be done interactively in 3D or programmatically using ParaView's batch processing capabilities. ParaView was developed to analyze extremely large datasets using distributed memory computing resources. It can be run on supercomputers to analyze datasets of terascale as well as on laptops for smaller data. Remote Visualization with ParaView ParaView is a client-server application. The ParaView client (or simply paraview) will run on your desktop while the server will run at the remote supercomputing site. The following describes the steps you will take to

174

Allelic Loss in Esophageal Squamous Cell Carcinoma Patients with and without Family History of Upper Gastrointestinal Tract Cancer  

Science Journals Connector (OSTI)

...patients in group 2 had no family history of upper gastrointestinal or...cancers were combined for family history because historically both were...daily), and a detailed family history of cancer (including all cancers...microdissection (Pixcell 100; Arcturus Engineering, Mountain View, CA). Procured...

Nan Hu; Mark J. Roth; Michael R. Emmert-Buck; Ze-Zhong Tang; Mihael Polymeropolous; Quan-Hong Wang; Alisa M. Goldstein; Xiao-You Han; Sanford M. Dawsey; Ti Ding; Carol Giffen; and Philip R. Taylor

1999-11-01T23:59:59.000Z

175

BNL | Our History  

NLE Websites -- All DOE Office Websites (Extended Search)

Our History Our History A Passion for Discovery, a History of Scientific Achievement Brookhaven National Laboratory was established in 1947 on the eastern end of Long Island at the former site of the U.S. Army's Camp Upton. Originally built out of a post-World War II desire to explore the peaceful applications of atomic energy, the Laboratory now has a broader mission: to perform basic and applied research at the frontiers of science, including nuclear and high-energy physics; physics and chemistry of materials; nanoscience; energy and environmental research; national security and nonproliferation; neurosciences; structural biology; and computational sciences. Over its history, Brookhaven Lab has housed three research reactors, numerous one-of-a-kind particle accelerators, and other

176

Kelli Cox Oral History  

E-Print Network (OSTI)

Oral history interview with Kelli Cox conducted by Lauren Helmer in Lawrence, Kansas, on December 30, 2010. In this inteview, Kelli Cox discusses her experiences attending a variety of churches in Lawrence, including the Christ Community Church...

Cox, Kelli; Helmer, Lauren

2010-12-30T23:59:59.000Z

177

Noah Hamilton Oral History  

E-Print Network (OSTI)

Oral history interview with Noah Hamilton conducted by Stephanie Meador in Topeka, Kansas, on November 20, 2009. In this interview, Noah Hamilton describes the experience of being raised in the Bahá'í faith. He discusses the tenets of Bahá...

Hamilton, Noah; Meador, Stephanie Rae

2009-11-20T23:59:59.000Z

178

Black History Month  

Energy.gov (U.S. Department of Energy (DOE))

During National African American History Month, we pay tribute to the contributions of past generations and reaffirm our commitment to keeping the American dream alive for the next generation.  In...

179

Beverly Boyd Oral History  

E-Print Network (OSTI)

Oral history interview with Beverly Boyd conducted by Steve Teichgraeber in Lawrence, Kansas, on November 12, 2010. In this interview, Beverly Boyd discusses the life of Saint Rose-Phillippine Duchesne (1769-1852), a ...

Boyd, Beverly; Teichgraeber, Steve

2010-11-12T23:59:59.000Z

180

Garrett Fugate Oral History  

E-Print Network (OSTI)

Oral history interview with Garrett Fugate conducted by Jeremy Adkison in 2010. In this interview, University of Kansas student Garrett Fugate discusses his childhood experiences as a member of the Greek Orthodox community, and his eventual decision...

Fugate, Garrett; Adkison, Jeremy

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Ryan Campbell Oral History  

E-Print Network (OSTI)

Under the Rainbow: Oral Histories of GLBTQ People in Kansas Ryan Campbell Oral History Part 1 video platform video management video solutionsvideo player Part 2 video platform video management video solutionsvideo player... Lawrence, KS 66045 Requestors must identify: 1. Type of publication 2. Proposed title 3. Specific passages to be quoted 4. Anticipated uses of the passages 5. Publisher's name 6. Expected date of publication ...

Campbell, Ryan; Albin, Tami

2009-12-16T23:59:59.000Z

182

Y-12's history captured in short film | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

highlights of the site's history now is available for viewing on the Y-12 public Web site at http:www.y12.doe.govlibraryvideos70-years-making-world-safer. The...

183

Stereoscopic optical viewing system  

DOE Patents (OSTI)

An improved optical system which provides the operator with a stereoscopic viewing field and depth of vision, particularly suitable for use in various machines such as electron or laser beam welding and drilling machines. The system features two separate but independently controlled optical viewing assemblies from the eyepiece to a spot directly above the working surface. Each optical assembly comprises a combination of eye pieces, turning prisms, telephoto lenses for providing magnification, achromatic imaging relay lenses and final stage pentagonal turning prisms. Adjustment for variations in distance from the turning prisms to the workpiece, necessitated by varying part sizes and configurations and by the operator's visual accuity, is provided separately for each optical assembly by means of separate manual controls at the operator console or within easy reach of the operator.

Tallman, C.S.

1986-05-02T23:59:59.000Z

184

Reconstructing the Star Formation Histories of Galaxies  

E-Print Network (OSTI)

We present a methodological study to find out how far back and to what precision star formation histories of galaxies can be reconstructed from CMDs, from integrated spectra and Lick indices, and from integrated multi-band photometry. Our evolutionary synthesis models GALEV allow to describe the evolution of galaxies in terms of all three approaches and we have assumed typical observational uncertainties for each of them and then investigated to what extent and accuracy different star formation histories can be discriminated. For a field in the LMC bar region with both a deep CMD from HST observations and a trailing slit spectrum across exactly the same field of view we could test our modelling results against real data.

Uta Fritze; Thomas Lilly

2007-01-15T23:59:59.000Z

185

URAT: astrometric requirements and design history  

E-Print Network (OSTI)

The U.S. Naval Observatory Robotic Astrometric Telescope (URAT) project aims at a highly accurate (5 mas), ground-based, all-sky survey. Requirements are presented for the optics and telescope for this 0.85 m aperture, 4.5 degree diameter field-of-view, specialized instrument, which are close to the capability of the industry. The history of the design process is presented as well as astrometric performance evaluations of the toleranced, optical design, with expected wavefront errors included.

Zacharias, N; Rakich, A; Epps, H

2006-01-01T23:59:59.000Z

186

History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

History History History On January 7, 2011, the President signed H.R. 6523 (111th), the Ike Skelton National Defense Authorization Act for Fiscal Year 2011 (http://www.govtrack.us/congress/bills/111/hr6523) which became Public Law 111-384. Section 3124 specifically states, "The Secretary of Energy may establish a program to permit the establishment of energy parks on former defense nuclear facilities" (50 U.S.C. 2814). In response, on February 17, 2011, the Department of Energy (DOE) established a Task Force on the ARI to address the legislation in detail. The purpose of the task force was to implement asset revitalization efforts in response to Congressional direction, and to develop recommendations for a continued formalized asset revitalization program. The task force achieved this through facilitating

187

PAFC History and Successes  

NLE Websites -- All DOE Office Websites (Extended Search)

PAFC History and Successes PAFC History and Successes John Ferro Manager Product Development john.ferro@utcpower.com 2 2 AGENDA Company overview and history System description and applications Failure modes and life analysis Summary 3 3 Research Center Hamilton Sundstrand Pratt & Whitney Sikorsky UTC Power Otis Carrier UTC Fire & Security UNITED TECHNOLOGIES CORPORATION 18 th largest U.S. manufacturer (2009 list, Industry Week) 37 th largest U.S. corporation (2009 list, Fortune) 61 st largest publicly held manufacturer in the world (2009 list, Industry Week) Revenues: $58.7 billion (2008) Commercial & Residential Building Systems, Aerospace & Transportation, Industrial systems 4 UTC POWER Markets Transportation fuel cells Stationary fuel cells Global sales 5 continents 19 countries Space & defense

188

NTS_History.indd  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Atmospheric Nuclear Atmospheric Nuclear Weapons Testing 1951 - 1963 Battlefi eld of the Cold War The Nevada Test Site United States Department of Energy Volume I Of related interest: Origins of the Nevada Test Site by Terrence R. Fehner and F. G. Gosling The Manhattan Project: Making the Atomic Bomb * by F. G. Gosling The United States Department of Energy: A Summary History, 1977 - 1994 * by Terrence R. Fehner and Jack M. Holl * Copies available from the U.S. Department of Energy 1000 Independence Ave. S.W., Washington, DC 20585 Attention: Offi ce of History and Heritage Resources Telephone: 301-903-5431 DOE/MA-0003 Terrence R. Fehner & F. G. Gosling Offi ce of History and Heritage Resources Executive Secretariat Offi ce of Management Department of Energy September 2006 Battlefi eld of the Cold War

189

History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

History History History Although they are tiny, atoms have a large amount of energy holding their nuclei together. Certain isotopes of some elements can be split and will release part of their energy as heat. This splitting is called fission. The heat released in fission can be used to help generate electricity in powerplants. Uranium-235 (U-235) is one of the isotopes that fissions easily. During fission, U-235 atoms absorb loose neutrons. This causes U-235 to become unstable and split into two light atoms called fission products. The combined mass of the fission products is less than that of the original U-235. The reduction occurs because some of the matter changes into energy. The energy is released as heat. Two or three neutrons are released along with the heat. These neutrons may hit other

190

Training History Report Training Services, Organizational Effectiveness/OHR 612-626-1373 UMReports  

E-Print Network (OSTI)

Training History Report Training Services, Organizational Effectiveness/OHR · 612-626-1373 UMReports www.umn.edu/ohr/trainingservices 1-30-13 Following are the steps to view one's training history. A report will be run in UMReports which displays training courses for one Emplid or by department

Thomas, David D.

191

The View from HQ  

National Nuclear Security Administration (NNSA)

A publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs A publication of the Office of Advanced Simulation & Computing, NNSA Defense Programs NA-ASC-500-07-Issue 3 May 2007 The View from HQ by Dimitri Kusnezov I have been spending much of my time these days thinking about science, technology and engineering and the role of the laboratories and how that will be reflected in the Complex of the future. This is on my mind for two reasons: one is my responsibility to

192

Oral Histories: Merril Eisenbud  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 HUMAN RADIATION STUDIES: REMEMBERING THE EARLY YEARS Oral History of Merril Eisenbud Conducted January 26, 1995 United States Department of Energy Office of Human Radiation Experiments May 1995 CONTENTS Foreword Short Biography Early Days as an Industrial Hygienist Hired as AEC's First Industrial Hygienist Insuring Atomic Workers Setting up the AEC's Health and Safety Laboratory Worker's Compensation History Contamination and Industrial Worker Education Federal Versus State Responsibility for Materials Production Safety Plant Safety and the Community Monitoring Radioactive Fallout Radiation and Cancer Rates Safety of the Nuclear Industry Use of Children in Research Developing Thyroid Radiation Counters Secrecy, Louis Strauss, and the Bravo Test Nuclear Test Fallout Studies

193

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS Tutorial_MAINTAIN_PROJECT_HISTORY.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MAINTIN PROJECT HISTORY MAINTIN PROJECT HISTORY REV: APRIL 2009 1 1. To update your project history, click on the "PMCDP Menu" and choose "Maintain project history." Maintain Project History ESS Tutorial, Project Management Career Development Program MAINTIN PROJECT HISTORY REV: APRIL 2009 2 2. A screen with the header "PMCDP Profile for [Your Name]" will appear titled "Step 3: Maintain project history." Options: Delete: This will delete all information for the selected project as currently showing in the table. Update: This will bring you back to the original input screen for project information. View Description: This will bring up a text box that will allow you to see the description previously entered. Sort: Project history information is presented in date-order, with the most recent position

194

NUPlans Budgeting Grant Input View  

E-Print Network (OSTI)

NUPlans Budgeting Grant Input View FMS704 NUPlansGrantInputViewV2 Last updated 4/7/2014 - rb © 2014 Northwestern University FMS704 NUPlans Contributor Budgeting 1 of 5 NUPlans Grant Input View NUPlans enables schools and units with grant projects to input grant expense estimates per project for the next fiscal

Shull, Kenneth R.

195

Protective laser beam viewing device  

DOE Patents (OSTI)

A protective laser beam viewing system or device including a camera selectively sensitive to laser light wavelengths and a viewing screen receiving images from the laser sensitive camera. According to a preferred embodiment of the invention, the camera is worn on the head of the user or incorporated into a goggle-type viewing display so that it is always aimed at the area of viewing interest to the user and the viewing screen is incorporated into a video display worn as goggles over the eyes of the user.

Neil, George R.; Jordan, Kevin Carl

2012-12-18T23:59:59.000Z

196

Wolf's History of Astronomy  

Science Journals Connector (OSTI)

... THE “History of Astronomy,” by Prof. Rudolf Wolf, of Zurich, a volume of 800 pages issued ... student. The production of such a work, involving an outline of the progress of astronomy from the earliest times to the present period, must have been a labour of ...

J. R. HIND

1878-01-31T23:59:59.000Z

197

Oil Quantity : The histori  

E-Print Network (OSTI)

model for Prudhoe Bay. Figure 11: Historical Prudhoe Bay oil production data, modeled economically Production (million bbl per Month) Historical Production Best Fit (Hist. Tax w/ELF, Ref. P) High Price 120 140 160 19 Oil Quantity Con Wel N E A N N ng Results e Bay : The histori Bay over tim : Prudhoe Ba

Lin, C.-Y. Cynthia

198

Early History of Magnetism  

Science Journals Connector (OSTI)

... 2, Dr. J. B. Kramer read a paper on “The Early History of Magnetism”, in which he discussed the various accounts of the first discovery of a magnet ... accounts of the first discovery of a magnet, and the development of the science of magnetism down to A.D. 1600. His remarks were divided into five sections, the ...

1932-03-19T23:59:59.000Z

199

Exploring Mars' Climate History  

E-Print Network (OSTI)

Exploring Mars' Climate History #12;2 Mars Reconnaissance Orbiter ESA Mars Express (NASA: MARSIS by studying the solar wind and other interactions with the Sun. #12;The solar wind is a high-speed stream of electrons and protons released from the Sun. #12;High-energy photons (light) stream constantly from the Sun

200

The View from HQ  

National Nuclear Security Administration (NNSA)

  NA-ASC-500-07 Issue 2 January 2007 The View from HQ Sitting in airports and planes is risky beyond the obvious dangers now in the news. Uninter- rupted time to think may lead to new ideas. Instinct instructs us that when we hear Wash- ington has some new ideas, the result must be bad. After all, ideas suggest change, which is inherently disruptive. Today the notion of predictivity is on my mind as I am leaving the V&V 2007 meeting in Los Alamos. Predictivity is on my short list of overused, ill-defined words. Washington main- tains a full lexicon of such words-a fair number of which find their way into common usage.

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

False color viewing device  

DOE Patents (OSTI)

This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

Kronberg, J.W.

1991-05-08T23:59:59.000Z

202

Mound History and Information  

Office of Legacy Management (LM)

Mound Site History and Information Mound Site History and Information The Mound site, formerly known as the Mound Plant or Facility, takes its name from a nearby Na- tive American burial mound. The 306 acre facility is sited on a hill in the center of Miamisburg, Ohio. Construction of the Mound Plant began in 1946, and the site became operational in 1949. Mound, the nation's first post-war U.S. Atomic Energy Commission site to be constructed, was established to consolidate and continue the work conducted at the Dayton Units for the Manhattan Project. Much of the work at the Mound Plant during the Cold War involved production of the polonium- beryllium initiators used in early atomic weapons and the manufacture of and research related to ra- dionuclides. In the 1950s, the facility began to

203

About Fermilab - History  

NLE Websites -- All DOE Office Websites (Extended Search)

What is Fermilab? What is Fermilab? what is Fermilab main page | mission | history | Enrico Fermi History - Wilson Hall Beauvais Cathedral A daring achievement of Gothic architecture, the Saint-Pierre Cathedral of Beauvais, France helped inspire the distinctive design of Wilson Hall. The Cathedral (A.D. 1225-1568) was never completed westward of the choir and transepts, and the site of the proposed nave is partly occupied by the Romanesque church known as the "Basse oeuvre" ("low work"). The roof fell (A.D. 1284); the choir was reconstructed and strengthened by additional piers (A.D. 1337-47), and in the 16th century the transepts were built. The height of the vault (157 ft., 6 ins.) is the loftiest in Europe, and measures about three and a half times its span. One of the most daring

204

BNL | Our History: Accelerators  

NLE Websites -- All DOE Office Websites (Extended Search)

> See also: Reactors > See also: Reactors A History of Leadership in Particle Accelerator Design Cosmotron Cosmotron (1952-1966) Early in Brookhaven Lab history, the consortium of universities responsible for founding the new research center, decided that Brookhaven should provide leading facilities for high energy physics research. In April 1948, the Atomic Energy Commission approved a plan for a proton synchrotron to be built at Brookhaven. The new machine would accelerate protons to previously unheard of energies-comparable to the cosmic rays showering the earth's outer atmosphere. It would be called the Cosmotron. The Cosmotron was the first accelerator in the world to send particles to energies in the billion electron volt, or GeV, region. The machine reached its full design energy of 3.3 GeV in 1953.

205

RMOTC - About Us - History  

NLE Websites -- All DOE Office Websites (Extended Search)

History History Teapot Dome Scandal Teapot Dome was the popular name for the scandal during the administration of U.S. President Warren G. Harding. The scandal, which involved the secret leasing of naval oil reserve lands to private companies, was first revealed to the general public in 1924 after findings by a committee of the U.S. Senate. Teapot Rock, From which the famous Teapot Dome derives its name The creation of the Naval Petroleum Reserves originated with the growth of federal conservation policy under presidents Theodore Roosevelt, William Howard Taft, and Woodrow Wilson. The reserves were tracts of public land where oil should be kept in its natural reservoirs for the future use of the Navy. "Teapot Dome" originally acquired its name from a rock nearby

206

Reading Comprehension - Atomic History  

NLE Websites -- All DOE Office Websites (Extended Search)

Atomic History Atomic History A Greek philosopher named Democritus said that all atoms are small, hard particles. He thought that atoms were made of a single material formed into different shapes and sizes. The word " _________ element compound mixture atom " is derived from the Greek word "atomos" which means "not able to be divided." In 1803, John Dalton, a school teacher, proposed his atomic theory. Dalton's theory states that elements (substances composed of only one type of _________ molecules ions atom ) combine in certain proportions to form _________ compounds atoms mixtures elements . In 1897, a British scientist named J. J. Thomson experimented with a cathode-ray tube which had a positively charged plate. The plate attracted negatively charged particles that we now call _________ protons neutrons

207

NERSC Systems History  

NLE Websites -- All DOE Office Websites (Extended Search)

History of Systems History of Systems History of Systems Established in 1974 at Lawrence Livermore National Laboratory, NERSC was moved to Berkeley Lab in 1996 with a goal of increased interactions with the UC Berkeley campus. NERSC Systems System Name Installed System Type CPU Computational Pool Interconnect Disk (TB) Avg. Power Linpack HPL/ Top Rank Peak GFlops/s Type Speed Nodes SMP Size Total Cores Aggregate Memory (GB) Avg. Memory/ CPU Edison 2013 Cray XC30 Xeon 12-Core 2.3 GHz 5,200 24 124,800 332,800 2.67GB Hopper 2010 Cray XE6 Opteron Hex-Core 2.1 GHz 6,384 24 153,216 216,832 1.3 GB Gemini 2,000 1,054,000 (5) 1,054,000 Carver 2010 IBM iDataPlex Intel Nehalem Quad-Core 2.6 GHz 400 8 3,200 9,600 3 GB 4X QDR InfiniBand NGF 36,856 (322) 42,656

208

Star Formation Histories in the Local Group  

E-Print Network (OSTI)

Deep color magnitude diagrams extending to the main sequence provide the most direct measure of the detailed star formation history in a stellar population. With large investments of observing time, HST can obtain such data for populations out to 1 Mpc, but its field of view is extremely small in comparison to the size of Local Group galaxies. This limitation severely constrains our understanding of galaxy formation. For example, the largest galaxy in the Local Group, Andromeda, offers an ideal laboratory for studying the formation of large spiral galaxies, but the galaxy shows substructure on a variety of scales, presumably due to its violent merger history. Within its remaining lifetime, HST can only sample a few sight-lines through this complex galaxy. In contrast, a wide field imager could provide a map of Andromeda's halo, outer disk, and tidal streams, revealing the spatially-dependent star formation history in each structure. The same data would enable many secondary studies, such as the age variation in Andromeda's globular cluster system, gigantic samples of variable stars, and microlensing tracers of the galaxy's dark matter distribution.

Thomas M. Brown

2004-07-09T23:59:59.000Z

209

EVALUATION OF AP-FARM SIMULANT COMPOSITION FOR ROTARY MICROFILTER TESTING  

SciTech Connect

This document identifies the feed composition of a Hanford AP tank farm simulant for rotary microfiltration testing. The composition is based on an Hanford Tank Waste Operations Simulator (HTWOS) model run in combination with Tank Waste Information Network (TWINS) data and mineralogical studies of actual waste solids. The feed simulant is intended to be used in test runs at SRNL. The simulant will be prepared in two parts: (1) A supernate, composed of water-soluble salts and (2) The undissolved (actually, undissolvable) solids. Test slurries with distinct solids concentrations (e.g., 0.5, 5 and 10 wt%) are then prepared as needed. The base for the composition of supernate and solids is the modeled feed sequence for a deployment scenario of the Supplemental Pretreatment units within AP-farm. These units comprise a filtration part, the RMF, and a Cesium-removal part, a Small Column Ion Exchange. The primary use of this simulant is for filtration testing - however, in case that it is also used for ion-exchange tests, the amount of Cs-137 that would need to be added is available in Table 1 and Attachment 3. A modified model run (MMR-049) of the Hanford Tank Waste Operations Simulator (HTWOS) system plan 6 case 3 was performed to identify the feed sequence. Case 3 assumed supplemental treatment besides the low activity waste (LAW) melter with supplemental pretreatment supporting the pretreatment facility. The MMR did not cap the duration of supplemental pretreatment to 15 months, but rather used it throughout the entire treatment mission as an add-on option to the pretreatment facility at the Waste Treatment and Immobilization Plant (WTP). Tank 241-AP-105 (AP-105) was chosen as the feed tank to the filtration unit. Other parameters included a fixed minimum of 0.5 wt% solids in the feed and a maximum Na-concentration of 5M in the supernate. The solids rejection from the filtration unit was set to 99.99% and the maximum allowed amount of solids within tank AP-105 was set to 10 wt%. A comprehensive description of the run and the full suite of results were issued as SVF-2364-00. The list of individual feed events including the amounts of liquid and solids transferred for the first five years is added as Attachment 2; the chemical composition of the supernate feed comprises Attachment 3. For the simulant composition, only the first five years of proposed feed delivery were taken into account. The main outcome of MMR-049 was that for the first five years, the feed would come mostly from AP-farms. Multiple delivery campaigns to AP-105 are included in this average feed, while minimizing the amount of contributing tanks to the solids in the feed mix.

HUBER HJ

2011-09-19T23:59:59.000Z

210

Hanford Overview and History - Hanford Site  

NLE Websites -- All DOE Office Websites (Extended Search)

About Us > Hanford Overview and History About Us Hanford Overview and History Hanford Cleanup Hanford Site Wide Programs Hanford Overview and History Email Email Page | Print Print...

211

Kami Oral History  

E-Print Network (OSTI)

this interview the way that I start off all the oral histories which is, Tell me where you were born and when. KAMI: I was born in Salt Lake City, Utah in August, 1950. And my father was at the University of Utah in school. And they lived in Layton, so we.... But yeah, I went across the country and I danced around and—(laugh) and I love Salt Lake. And I didn't appreciate Salt Lake then the way I do now. I've really come to—but I had good friends in the dorms and, yeah I didn't—I was never homesick, never...

Albin, Tami; Kami

2010-01-11T23:59:59.000Z

212

TESTING AND EVALUATION OF THE MODIFIED DESIGN OF THE 25-DISK ROTARY MICROFILTER  

SciTech Connect

This report details redesign of a commercially available rotary microfilter to meet the operational and maintenance requirements for radioactive service. Personnel developed the design and coordinated procurement of two filters followed by testing of one unit. System testing examined the ability to rinse soluble material from the system, filtration performance using several insoluble solids loadings, effectiveness in washing sludge, amount of wear to parts and maintenance of the system including the insertion and removal of the filter stack, and the ability to flush solids from the system. The test program examined flushing the filter for soluble material by filling the system with a Rhodamine WT dye solution. Results showed that draining the system and rinsing with 50 gallons of water resulted in grater than 100X reduction of the dye concentration. Personnel determined filter performance using various amounts of insoluble sludge solids ranging from 0.06 to 15 weight percent (wt%) insoluble solids in a 3 molar (M) sodium simulated supernate. Through approximately 120 hours of start-and-stop (i.e., day shift) operation and various insoluble solids loadings, the filter produced filtration rates between 3 and 7 gallons per minute (gpm) (0.12-0.29 gpm/ft{sup 2}) for a 25-disk filter. Personnel washed approximately 80 gallons of simulated sludge using 207 gallons of inhibited water. Washing occurred at constant volume with wash water fed to a well mixed tank at the same rate as filtrate removal. Performance measurement involved collecting and analyzing samples throughout the washing for density and sodium content. Results showed an effective washing, mimicking a predicted dilution calculation for a well mixed tank and reducing the sodium concentration from 3.2 M to less than 0.3 M. Filtration rates during the washing process ranged between 3 and 4.3 gpm for one filter unit. The filter system then concentrated the washed 15 wt% insoluble solids slurry to approximately 20 wt% insoluble solids with no operational problems with the exception of the entrainment of air due to leaking packing in the feed pump. Prior to the air entrainment, the filtration rate was approximately 4.2 gpm for one filter assembly with the process fluid temperature adjusted to 35 C. Personnel measured the turbidity of filtrate samples from all phases of testing. All samples measured were less than 3 NTU, with the majority of samples less than 1 NTU. Thus, all measurements fell below the process acceptance criterion of less than 5 NTU. After slurry operations, personnel rinsed the filter with the equivalent of 250 gallons of water by re-circulating 50 gallons of water. The residual sludge solids remaining on the filter stack weighed approximately 685 grams. This amount of solids corresponds to an equivalent activity of 15.1 curies (Ci) beta and 0.38 Ci gamma radiation dose for Sludge Batch 4. Workers completely disassembled the filter system and examined it for signs of wear and component operation. An evaluation by a John Crane Inc. representative concluded that the wear observed on the mechanical seal resulted primarily from the numerous stops and starts, the abrasive nature of the process fluid and the possibility that the seal faces did not receive enough lubrication from the process fluid. No measurable slurry bypassed the mechanical seal. While it is extremely difficult to predict the life of the seal, the vendor representative indicates a minimum of one year in present service is reasonable. Changing the seal face material from silicon-carbide to a graphite-impregnated silicon-carbide is expected to double the life of the seal. Replacement with an air seal might be expected to increase lifetime to five years. The bottom bushing showed wear due to a misalignment during the manufacture of the filter tank. Minor adjustments to the alignment with shims and replacement of the graphite bushing with a superior material will greatly reduce this wear pattern.

Herman, D; Michael Poirier, M; Samuel Fink, S

2006-09-29T23:59:59.000Z

213

History | Argonne National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Argonne's Nobelists Argonne's Nobelists Three Argonne physicists have been honored with Nobel Prizes: Enrico Fermi, Argonne's founding director, won the 1938 Nobel Prize in physics for his demonstrations of the existence of new radioactive elements produced by neutron irradiation and for his related discovery of nuclear reactions brought about by slow neutrons. Maria Goeppert Mayer shared the 1963 Nobel Prize in physics. While working at Argonne in 1948, she developed the "nuclear shell model" to explain how neutrons and protons within atomic nuclei are structured. Alexei A. Abrikosov shared the 2003 Nobel Prize in physics for research on condensed-matter physics and superconductivity. Our history sparked the nation's future AVIDAC, Argonne's first digital computer, began operation in January 1953.

214

Chisolm View | Open Energy Information  

Open Energy Info (EERE)

Chisolm View Chisolm View Jump to: navigation, search Name Chisolm View Facility Chisolm View Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner GE Energy Financial Service / Enel Green Power North America Developer TradeWind Energy Energy Purchaser Alabama Power Company Location Hunter OK Coordinates 36.59527057°, -97.54501104° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.59527057,"lon":-97.54501104,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

215

SERI Desiccant Cooling Test Facility. Status report. Preliminary data on the performance of a rotary parallel-passage silica-gel dehumidifier  

SciTech Connect

This report describes the SERI Desiccant Cooling Test Facility. The facility can test bench-scale rotary dehumidifiers over a wide range of controlled conditions. We constructed and installed in the test loop a prototype parallel-passage rotary dehumidifier that has spirally wound polyester tape coated with silica gel. The initial tests gave satisfactory results indicating that approximately 90% of the silica gel was active and the overall Lewis number of the wheel was near unity. The facility has several minor difficulties including an inability to control humidity satisfactorily and nonuniform and highly turbulent inlet velocities. To completely validate the facility requires a range of dehumidifier designs. Several choices are available including constructing a second parallel-passage dehumidifier with the passage spacing more uniform.

Schultz, K.J.

1986-04-01T23:59:59.000Z

216

A history of the neutron  

Science Journals Connector (OSTI)

A history of the neutron ... Describes some of the individuals and the work they did leading to the discovery of the neutron. ...

Vasilis Lavrakas

1952-01-01T23:59:59.000Z

217

History of Proton Linear Accelerators  

E-Print Network (OSTI)

much. References 1. Linear Accelerators, edited by P. M .at the 1986 Linear Accelerator Conference, SLAC, Stanford,HISTORY OF PROTON LINEAR ACCELERATORS Luis W. Alvarez TWO-

Alvarez, Luis W.

1987-01-01T23:59:59.000Z

218

Apparatus and method for controlling the rotary airlocks in a coal processing system by reversing the motor current rotating the air lock  

DOE Patents (OSTI)

An improvement to a coal processing system where hard materials found in the coal may cause jamming of either inflow or outflow rotary airlocks, each driven by a reversible motor. The instantaneous current used by the motor is continually monitored and compared to a predetermined value. If an overcurrent condition occurs, indicating a jamming of the airlock, a controller means starts a "soft" reverse rotation of the motor thereby clearing the jamming. Three patterns of the motor reversal are provided.

Groombridge, Clifton E. (Hardin, MT)

1996-01-01T23:59:59.000Z

219

Engineering task plan for the development, fabrication and installation of rotary mode core sample truck grapple hoist box level wind system  

SciTech Connect

This Engineering Task Plan is to design, generate fabrication drawings, fabricate, test, and install the grapple hoist level wind system for Rotary Mode Core Sample Trucks (RMCST) 3 and 4. Deliverables will include generating fabrication drawings, fabrication of one level wind system, updating fabrication drawings as required, and installation of level wind systems on RMCST 3 or 4. The installation of the level wind systems will be done during a preventive maintenance outage.

BOGER, R.M.

1999-05-12T23:59:59.000Z

220

Printed 3D Multi-View Images  

Science Journals Connector (OSTI)

The technique to produce full-parallax 3D multi-view still pictures is described. The matrix of source views (from 6x6 to 15x15 views) is built from computer-generated images or...

Kim, Sung-Sik; Son, Kwang-Hun; Saveljev, V V; Son, Jung-Young

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

A HISTORY OF EMATS  

Science Journals Connector (OSTI)

This paper was prepared for a Special Session in the 34th Annual Review of Quantitative NDE devoted to “Applications of EMATs”. As such it reviews the past history of electromagnetic induction of vibrations in metals with special attention to the application to nondestructive testing. The first patent describing the use of Electromagnetic Acoustic Transducers (EMATs) to replace the commonly used piezoelectric transducer was in 1969 but their first appearance in the scientific literature was in 1939 when the principles were applied to exciting and detecting the longitudinal resonance modes of bars of brass. The first true application to nondestructive testing was an R&D program sponsored by the American Gas Association to develop a device for inspecting buried gas pipelines for stress corrosion cracks in the early 1970's. During this same time period theoretical models to describe the transduction mechanism appeared and led to the engineering of solutions to NDT and NDE problems that could not be accomplished with piezoelectric devices. The papers in the session to follow this historical summary show how the field has developed over the past 30 years and expose an impressive array of applications to quantitative nondestructive evaluation (QNDE) practices.

George Alers

2008-01-01T23:59:59.000Z

222

Our History | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Our History Our History Our History Our History The history of Office of Electricity Delivery and Energy Reliability (OE) begins in August 2003, when the Department created two offices to provide focus in several critical areas: the Office of Electric Transmission and Distribution (TD), which included elements from the DOE Energy Efficiency and Renewable Energy office and the DOE Policy and International Affairs office, to advance the technologies needed to ensure a reliable, robust and modern U.S. electricity grid; and the Office of Energy Assurance (EA), to coordinate Federal response activities within the energy sector during energy disruptions and developed strategies to harden infrastructure against such disruptions. On August 14, 2003, large portions of the Midwest and Northeast United

223

In Vitro Comparison in a Manikin Model: Increasing Apical Enlargement with K3 and K3XF Rotary Instruments  

Science Journals Connector (OSTI)

AbstractIntroduction The aim of the study was to compare the K3 and K3XF systems (SybronEndo, Glendora, CA) after 1 and 2 uses by evaluating apical transportation, working length loss, and working time in a manikin model. Methods Mesial canals of 40 extracted first mandibular molars were instrumented. Radiographs taken after instrumentation with #25, #30, #35, and #40 files were superimposed on the preoperative image in both mesiodistal and buccolingual angulations. AutoCAD (Autodesk Inc, San Rafael, CA) was used to measure working length loss and apical transportation at 0, 0.5, and 1 mm from the working length (WL). The working time was measured. Group comparison was analyzed using post hoc Tukey honestly significant difference tests (P < .05). Results No significant differences were found in apical transportation, working length loss between K3 and K3XF systems, or between the number of uses. Significant differences were found when canal enlargement was performed to a #35–40 (P < .05). K3 instrumentation performed significantly faster (29.6 ± 15.4) than with the K3XF system (40.2 ± 17.7) (P < .05). No differences were observed in working time when comparing the number of uses. Conclusions K3 and R-phase K3XF rotary systems shaped curved root canals safely with minimal apical transportation, even up to a 40/04 file.

Juan Gonzalo Olivieri; Eva Stöber; Marc García Font; Jose Antonio González; Pablo Bragado; Miguel Roig; Fernando Duran-Sindreu

2014-01-01T23:59:59.000Z

224

List View | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

List View List View Safety Data/Tools Apps Challenges Resources Blogs Let's Talk Safety You are here Data.gov » Communities » Safety List View Interactive applications that visually display large datasets provide a portal to explore data and make discoveries. Federal agencies collect information on energy production, use, natural resources, and energy infrastructure logistics and this data can be used to create calculators, interactive maps, and other applications that leverage this data. These applications provide user communities the ability to highlight the energy issues that are occurring within their communities, aid businesses plan and analyze their proposed projects, and provide a baseline for analyzing how energy resources can be most optimally and efficiently used. This page

225

Wide field of view telescope  

DOE Patents (OSTI)

A wide field of view telescope having two concave and two convex reflective surfaces, each with an aspheric surface contour, has a flat focal plane array. Each of the primary, secondary, tertiary, and quaternary reflective surfaces are rotationally symmetric about the optical axis. The combination of the reflective surfaces results in a wide field of view in the range of approximately 3.8.degree. to approximately 6.5.degree.. The length of the telescope along the optical axis is approximately equal to or less than the diameter of the largest of the reflective surfaces.

Ackermann, Mark R. (Albuquerque, NM); McGraw, John T. (Placitas, NM); Zimmer, Peter C. (Albuquerque, NM)

2008-01-15T23:59:59.000Z

226

Revolutionizing history education : using augmented reality games to teach histories  

E-Print Network (OSTI)

In an ever-changing present of multiple truths and reconfigured histories, people need to be critical thinkers. Research has suggested the potential for using augmented reality (AR) games- location-based games that use ...

Schrier, Karen L

2005-01-01T23:59:59.000Z

227

UCD School of History & Archives Student Handbook  

E-Print Network (OSTI)

UCD School of History & Archives Student Handbook 2014-2015 This handbook is relevant for all Students study history? Can Evening Arts students study history? How does the School of history School of History and Archives UCD: Student Handbook, 2014-15 2 #12;6. The ECTS credit system How are my

228

NEPA History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

History History NEPA History Selected documents providing historical information on NEPA. June 14, 2012 Federal Register Notices for DOE NEPA Guidelines and Regulations Historical compilation of Federal Register notices for DOE NEPA guidelines and regulations. December 31, 2009 Presidential Proclamation on the 40th Anniversary of the National Environmental Policy Act Proclamation of President Obama to "call upon all executive branch agencies to promote public involvement and transparency in their implementation of the National Environmental Policy Act." July 1, 1999 EPA's Section 309 Review: The Clean Air Act and NEPA This document discusses Section 309 of the Clean Air Act, which authorizes the Environmental Protection Agency to review certain proposed actions of

229

Limited View Angle Iterative CT Reconstruction  

E-Print Network (OSTI)

;Some Prior Literature in Limited View Tomography CT with limited-angle data and few views IRR algorithm Iterative Reconstruction-Reprojection (IRR) : An Algorithm for Limited Data Cardiac- Computed-views and limited-angle data in divergent-beam CT by E. Y. Sidky, CM Kao, and X. Pan (2006) Few-View Projection

230

Census and viewing of organisms  

NLE Websites -- All DOE Office Websites (Extended Search)

Census and viewing of organisms Census and viewing of organisms Name: m hariaczyi Status: N/A Age: N/A Location: N/A Country: N/A Date: Around 1993 Question: How many organisms exist in the world today? What is the most powerful microscope that could be used for viewing organism? Replies: The most powerful microscope is called an electron microscope, which can be used for viewing entire organisms, although few organisms are small enough to see all of them at high magnifications allowed by this microscope. So most often its used to look at fixed sections of organisms. Since the electron microscope only works in a vacuum, with no air, you cannot look at live organisms. To do that, probably the most powerful microscope is called a Nomarski, or in technical terms, a "differential interference contrast" microscope. This is a modification of a normal light microscope that allows better contrast in living tissue. It is not any more powerful than a light microscope, and is much less powerful than an electron microscope, but it allows you to see living things much better.

231

View  

Science Journals Connector (OSTI)

Mn, the concentration gradient that drives the diffusion is maintained by the precipitation of insoluble oxides. In the case of Cd, ... Cientifica e Tecnologica (

2000-10-07T23:59:59.000Z

232

View  

E-Print Network (OSTI)

May 18, 2012 ... bottleneck, long-time production simulations will be severely hampered ...... t ¼ 0.975, (g) t ¼ 1.0, (h) t ¼ 1.025, (i) t ¼ 1.275, (j) t ¼ 1.525, (k) t ¼ ...

S. Dong

2012-06-21T23:59:59.000Z

233

View  

E-Print Network (OSTI)

In order to increase the search capability of MBH, a population framework has been proposed ... The key idea is to avoid new individuals to enter the population if someone similar (in a ..... We measure the efficiency in terms of number of (two-.

andrea,,,

234

View  

E-Print Network (OSTI)

May 31, 2005 ... Robert M. Freund: MIT Sloan School of Management, 50 Memorial Drive, Cambridge, Massachusetts 02139-4307, ...... the transition kernel.

2005-05-30T23:59:59.000Z

235

View  

Science Journals Connector (OSTI)

89-l 1268) ran the carbon analysis of the sediment trap material ..... vehicle camera system were analyzed with a ... tribution of distances with the computer pro-.

1999-12-21T23:59:59.000Z

236

View  

E-Print Network (OSTI)

obtained by using different uncertainty sets estimated using simulated and ... Given a fixed mix of electric power plants (nuclear, thermal, hydroelectric, and ...

2011-01-28T23:59:59.000Z

237

View  

E-Print Network (OSTI)

Aug 19, 2009 ... linear-algebraic and graph theoretic properties of this matrix class. The con- ..... The MatLab solvers linprog and quadprog were used.

2010-03-14T23:59:59.000Z

238

View  

E-Print Network (OSTI)

Mar 14, 2006 ... ... of the paper is devoted to the development of background material for ..... Note that the optimization problem in the correction phase is solved over ...... In Phase I

2006-03-31T23:59:59.000Z

239

View  

E-Print Network (OSTI)

Mar 1, 2007 ... 2The logarithmic barrier for the half space {u ? Rn | a · u ? b} is ..... in the Uncapacitated Falicity Location Library (UflLib) [Hoe06]. .... For our test we use 36 unsolved UFL instances that come from two public sets of instances.

2007-03-01T23:59:59.000Z

240

View  

E-Print Network (OSTI)

cT w tj (cj z) + o (1) = wti (z) + o (1), since c-Ow(cz) = w(z) for any w E W and c > 0. We have obtained a contradiction with (2.29), which proves (2.28). If w t = w(' ...

2004-12-25T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

View  

Science Journals Connector (OSTI)

Apr 15, 1976 ... terms of Hairston's hypothesis, to find that only the ... be a component of the search by grazers .... to stop searching and to enter into a state.

2000-01-05T23:59:59.000Z

242

View  

E-Print Network (OSTI)

which has a 0 infimum, but does not attain it. Here the certificates of the bad behavior of the system in (3.32) are. Z = (. 1 0. 0 0. ) , V = (. 0 1. 1 0. ) . Example 2.

2014-05-14T23:59:59.000Z

243

View  

E-Print Network (OSTI)

1. Introduction. The purpose of the present paper is to develop some new directions of investigation in ..... For each i = 1, ..., m, and g = (x1, ..., xr,mr ), we have.

2003-09-25T23:59:59.000Z

244

View  

E-Print Network (OSTI)

Definition 1 The persistency of a variable xi is defined to be the probability that xi = 1 in the ..... i , we know a limited set of marginal moments mr i . We let ? ...

2005-04-19T23:59:59.000Z

245

View  

E-Print Network (OSTI)

In [4], Devinatz, Hopkins, and Smith proved the nilpotence theorem, a remark- able result which provides algebraic means for detecting nilpotence in the ...

1997-12-15T23:59:59.000Z

246

View  

Science Journals Connector (OSTI)

carbon (C) and increased mixing energies, making CO, limitation less likely. .... Verde Reef (Vera Cruz, Mexico). ..... solar energy is more important in deter-.

2000-03-03T23:59:59.000Z

247

View  

E-Print Network (OSTI)

Sep 3, 2003 ... Superconductors are able to carry equilibrium currents without resistance. .... by an Ohm's law where ? is the electric conductivity and b1 is a ...

1910-31-00T23:59:59.000Z

248

Viewed  

Science Journals Connector (OSTI)

Oct 27, 1982 ... study area does not contain indigenous io- .... Zn Handbook ofgeochemistry. V. 7, part 4. Spring ... Lakes-physics, chemistry, geology. Springer.

2000-02-09T23:59:59.000Z

249

View  

Science Journals Connector (OSTI)

This lake is in the Kigezi Highlands, western Uganda, in a narrow steep-sided branching river valley about 20 km long that has been dammed and drowned by a.

Orcas

250

View  

Science Journals Connector (OSTI)

1943. Treatment of experimental data. Wiley,. New York, N.Y. 344 p. ZIIIN-ELDIN, Z. P. 1961. Plankton pigments in. East Lagoon, Galveston, Texas. Trans. Am.

Orcas

251

View  

E-Print Network (OSTI)

GLEV train, a new bullet train under development in Japan, is formulated as the ... conservation law and v ? c represents a constraint on the maximum capacity at each ... Railways Technical Research Institute, Kokubunji, Tokyo 185-8540 Japan ... optimization since 1984 when Karmarkar proposed the projective scaling ...

2002-10-31T23:59:59.000Z

252

View  

E-Print Network (OSTI)

the random consequences of the chosen action, h(x, ?), are preferred to those of a baseline random variable Z for all utility ...... Ground truth. Envelope. Figure 3: ...

2012-06-29T23:59:59.000Z

253

View  

E-Print Network (OSTI)

A major challenge in using optimization to make risk-averse decisions in the face of uncertainty is how to specify an acceptable level of risk. Recently, Dentcheva ...

2011-06-22T23:59:59.000Z

254

View  

E-Print Network (OSTI)

maximum acceptable risk that one is willing to take. ... of initial wealth allocated to the assets, CVaR?(?T x) measures the risk of a given allocation x, b. 1 ...

2009-03-26T23:59:59.000Z

255

View  

E-Print Network (OSTI)

acceptable level of risk. As shown in [2], Problem (3) is a difficult, in fact NP-hard, combinatorial problem. Following [17] and [21], we choose to tackle it by ...

2010-02-08T23:59:59.000Z

256

View  

E-Print Network (OSTI)

allowed to be violated an “acceptable” amount of time. There are no ... optimal investment strategies with a certain level of risk [10]. Up to this point most research ...

2008-05-24T23:59:59.000Z

257

View  

E-Print Network (OSTI)

in the primal problem. As it can be seen by the number of floating point operations needed to generate the approximation to the set of efficient points, the strategy.

258

View  

E-Print Network (OSTI)

Oct 29, 2008 ... serial machine in floating point is well below our needs. 3 Notation. We are given an m × d design matrix P of floating point numbers and an.

2008-10-28T23:59:59.000Z

259

View  

E-Print Network (OSTI)

function, and the nuclear norm. The support function is based on the graph of the product of a matrix with its transpose. Closed form expressions for the support ...

2014-08-28T23:59:59.000Z

260

View  

E-Print Network (OSTI)

the results of [8] to obtain, for each natural number n, a simple nuclear C?- algebra An whose ordered K0-group is order isomorphic to Zn. This result was further ...

2008-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

View  

E-Print Network (OSTI)

the UCT and reproves Huaxin Lin's theorem on the classification of nuclear tracially AF ... A deep conjecture of Elliott asserts that the simple separable nuclear ...

2004-06-29T23:59:59.000Z

262

View  

E-Print Network (OSTI)

Q we have yi = Gdi and the G–orthogonality condition of vectors si, si+1 can be written as ?isT i Gsi+1 = yT i si+1 = 0 (we assume that ?i = 0). This together with ...

2009-03-10T23:59:59.000Z

263

View  

E-Print Network (OSTI)

job Ji is a function of its completion time, usually denoted by Ci. ..... For any t > max(P, d), there exists a value ? > 0 and a job index i? ? {1,...,n} such that, for any ...

2006-03-29T23:59:59.000Z

264

View  

E-Print Network (OSTI)

Feb 28, 2006 ... Abstract. The major focus of this work is to compare several methods for computing the proximal point of a nonconvex function via numerical ...

2006-02-28T23:59:59.000Z

265

View  

E-Print Network (OSTI)

Our original motivating application is in Electronics and arises in the development of pulse ...... In 8th International Symposium on Fundamentals of Computa-.

Christoph Buchheim,,,

266

View  

E-Print Network (OSTI)

Feb 28, 2012 ... and P. Dorta-González. Departamento de Métodos Cuantitativos en Econom?a y Gestión. Universidad de Las Palmas de Gran Canaria (Spain).

2012-02-28T23:59:59.000Z

267

EM History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EM History EM History EM History Before (left) and after (right) photos of the Hanford site's F Reactor during operations in 1956 and in 2012, when EM and its contractors completed cleanup there. It was the first reactor area at the 586-square-mile Hanford site to be fully remediated. Before (left) and after (right) photos of the Hanford site's F Reactor during operations in 1956 and in 2012, when EM and its contractors completed cleanup there. It was the first reactor area at the 586-square-mile Hanford site to be fully remediated. EM's HISTORY (1989 - present) Fifty years of nuclear weapons production and energy research generated millions of gallons of liquid radioactive waste, millions of cubic meters of solid radioactive wastes, thousands of tons of spent nuclear fuel and

268

Our History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

History History Our History Elk Hills Naval Petroleum Reserve Circa 1920s Elk Hills Naval Petroleum Reserve Circa 1920s The Office of Fossil Energy has the longest directly-traceable history of any organization in the Department of Energy. While the nuclear energy program can look back to the Manhattan Project of World War II for its origins, the Federal Government's involvement in fossil fuel resources began several decades earlier, in the early 1900s. Oil Dominates Early Concerns The U.S.S. Colorado, Maryland, and West Virginia off the coast of California during the 1920's. The West Virginia was one of the first oil-burning ships. Much as today, petroleum was a major concern for the Federal Government at the start of the 20th century. Barely 50 years after the birth of the

269

HFIR History - ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

Home › Facilities › HFIR › History Home › Facilities › HFIR › History History of HFIR HFIR was constructed in the mid-1960s to fulfill a need for the production of transuranic isotopes (i.e., "heavy" elements such as plutonium and curium). Since then its mission has grown to include materials irradiation, neutron activation, and, most recently, neutron scattering. In 2007, HFIR completed the most dramatic transformation in its 40-year history. During a shutdown of more than a year, the facility was refurbished and a number of new instruments were installed, as well as a cold neutron source. The reactor was restarted in mid-May; it attained its full power of 85 MW within a couple of days, and experiments resumed within a week. Improvements and upgrades to HFIR include an overhaul of the

270

Center for the history of chemistry resources  

Science Journals Connector (OSTI)

Center for the history of chemistry resources ... A note alerting those interested in the histories of chemistry, chemical engineering, and chemical process industries to the resources available from the Center for the History of Chemistry. ... Chemical Engineering ...

Bruce V. Lewenstein

1988-01-01T23:59:59.000Z

271

A History Of Hot Dry Rock Geothermal Energy Systems | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » A History Of Hot Dry Rock Geothermal Energy Systems Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A History Of Hot Dry Rock Geothermal Energy Systems Details Activities (1) Areas (1) Regions (0) Abstract: This is a short history, so far as it can now be assembled, of early speculations and observations concerning the existence and origin of natural heat in the earth's crust; of some of the many methods proposed to extract and use it; and of recent investigations designed to develop and demonstrate such methods. It is probably only the preface to a much longer

272

Enumeration of Juvenile Salmonids in the Okanogan Basin Using Rotary Screw Traps, Performance Period: March 15, 2006 - July 15, 2006.  

SciTech Connect

The Colville Tribes identified the need for collecting baseline census data on the timing and abundance of juvenile salmonids in the Okanogan River basin for the purpose of documenting local fish populations, augmenting existing fishery data and assessing natural production trends of salmonids. This report documents and assesses the pilot year of rotary trap capture of salmonid smolts on the Okanogan River. The project is a component of the Colville Tribes Okanogan Basin Monitoring and Evaluation Program (OBMEP) which began in 2004. Trapping for outmigrating fish began on 14 March 2006 and continued through 11 July 2006. Anadromous forms of Oncorhynchus, including summer steelhead (O. mykiss), Chinook (O. tshawytscha), and sockeye (O. nerka), were targeted for this study; all have verified, natural production in the Okanogan basin. Both 8-ft and 5-ft rotary screw traps were deployed on the Okanogan River from the Highway 20 Bridge and typically fished during evening hours or 24 hours per day, depending upon trap position and discharge conditions. Juvenile Chinook salmon were the most abundant species trapped in 2006 (10,682 fry and 2,024 smolts), followed by sockeye (205 parr and 3,291 smolts) and steelhead (1 fry and 333 smolts). Of the trapped Chinook, all fry were wild origin and all but five of the smolts were hatchery-reared. All trapped sockeye were wild origin and 88% of the steelhead smolts were hatchery-reared. Mark-recapture experiments were conducted using Chinook fry and hatchery-reared steelhead smolts (sockeye were not used in 2006 because the peak of the juvenile migration occurred prior to the onset of the mark-recapture experiments). A total of 930 chinook fry were marked and released across eight separate release dates (numbers of marked Chinook fry released per day ranged from 34 to 290 fish). A total of 11 chinook fry were recaptured for an overall trap efficiency of 1.18%. A total of 710 hatchery-reared steelhead were marked and released across three separate release dates (numbers of steelhead released per day ranged from 100 to 500 fish). A total of 12 steelhead were recaptured for an overall trap efficiency of 1.69%. A pooled Peterson estimator with a Chapman modification was used to produce population estimates for wild Chinook fry and hatchery-reared steelhead based on the results of the mark-recapture experiments. The 2006 populations for Chinook and steelhead were estimated to be 381,554 (95% confidence intervals: 175,731-587,377) and 14,164 (6,999-21,330), respectively. The population estimates were based on the periods in which mark-recapture experiments were initialized through the end of the trapping season (10 May for steelhead and 1 June for Chinook).

Johnson, Peter N.; Rayton, Michael D.

2007-05-01T23:59:59.000Z

273

Hanford Natural Resource Trustee Council History & Accomplishments...  

NLE Websites -- All DOE Office Websites (Extended Search)

Natural Resource Trustee Council > HNRTC History & Accomplishments About Us Hanford Natural Resource Trustee Council HNRTC Members HNRTC History & Accomplishments Memorandum of...

274

History of Hydropower | Department of Energy  

Energy Savers (EERE)

History of Hydropower History of Hydropower Humans have been harnessing water to perform work for thousands of years. The Greeks used water wheels for grinding wheat into flour...

275

UC land grants: A photo history  

E-Print Network (OSTI)

Berkeley UC land grants: A photo history D Early days: 1862–UCR/CMP UC land grants: A photo history H. In 1987, UC

Editors, By

2012-01-01T23:59:59.000Z

276

A 12-MW-scale pilot study of in-duct scrubbing (IDS) using a rotary atomizer  

SciTech Connect

A low-cost, moderate-removal efficiency, flue gas desulfurization (FGD) technology was selected by the US Department of Energy for pilot demonstration in its Acid Rain Precursor Control Technology Initiative. The process, identified as In-Duct Scrubbing (IDS), applies rotary atomizer techniques developed for lime-based spray dryer FGD while utilizing existing flue gas ductwork and particulate collectors. IDS technology is anticipated to result in a dry desulfurization process with a moderate removal efficiency (50% or greater) for high-sulfur coal-fired boilers. The critical elements for successful application are: (1) adequate mixing of sorbent droplets with flue gas for efficient reaction contact, (2) sufficient residence time to produce a non-wetting product, and (3) appropriate ductwork cross-sectional area to prevent deposition of wet reaction products before particle drying is comple. The ductwork in many older plants, previously modified to meet 1970 Clean Air Act requirements for particulate control, usually meet these criteria. A 12 MW-scale IDS pilot plant was constructed at the Muskingum River Plant of the American Electric Power System. The pilot plant, which operates from a slipstrem attached to the air-preheater outlet duct from the Unit 5 boiler at the Muskingum River Plant (which burns about 4% sulfur coal), is equipped with three atomizer stations to test the IDS concept in vertical and horizontal configurations. In addition, the pilot plant is equipped to test the effect of injecting IDS off- product upstream of the atomizer, on SO{sub 2}and NO{sub x} removals.

Samuel, E.A.; Murphy, K.R.; Demian, A.

1989-11-01T23:59:59.000Z

277

On the history of multi-particle production in high energy collisions  

E-Print Network (OSTI)

The 60th birthday of Johann Rafelski was celebrated during the Strangeness in Quark Matter 2011 in Krakow. Johann was born in Krakow and he initiated the series of the SQM conferences. This report, which briefly presents my personal view on a history of multi-particle production in high energy collisions, is dedicated to Johann.

M. Gazdzicki

2012-01-02T23:59:59.000Z

278

A new view of avian life-history evolution tested on an incubation paradox  

Science Journals Connector (OSTI)

...Aging physiology Animals Argentina Arizona Biological Evolution...phylogenetically and ecologically between Argentina and Arizona are longer in Argentina. Long incubation periods...Williams 1996) and increased energy expenditure can increase mortality...

2002-01-01T23:59:59.000Z

279

A history of resistance to privatization in Russia  

Science Journals Connector (OSTI)

Abstract We investigate the connection between privatization in post-communist Russia and a mass privatization reform in Imperial Russia, the 1906 Stolypin land reform. Specifically, we relate historical measures of conflicts associated with the Stolypin reform to contemporary views on whether the privatization of the 1990s should be revised. These historical measures could influence contemporary views in two ways: first, differences in privatization-related conflicts in the past could have directly altered attitudes towards privatization in the 1990s and, second, these differences could merely reflect pre-determined dissimilarities in preferences. We first show that historical measures of resistance to privatization are associated with views that favor state ownership. One standard deviation increase in the historical resistance to privatization explains a quarter of the negative sentiment toward private property today. We also find that negative experiences with the Stolypin reform are associated with views on the procedural unfairness of modern privatization reforms, suggesting that pre-determined preferences cannot fully explain the weight of history.

Paul Castañeda Dower; Andrei Markevich

2014-01-01T23:59:59.000Z

280

Bartlesville History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bartlesville History Bartlesville History Bartlesville History The Bartlesville Energy Technology Center, Bartlesville, Oklahoma, circa 1937. The Bartlesville Energy Technology Center, Bartlesville, Oklahoma, circa 1937. Origins of the U.S. Government's First Petroleum Research Laboratory By 1916 the Bureau of Mines, which had been established six years earlier in the U.S. Department of the Interior, recognized the transforming role that petroleum was playing in American society. Across the country, the Bureau had begun establishing experiment stations, each specializing in a different extraction industry - coal, metals, clay, and other minerals - and each located close to the major centers of each resource. Now, the Bureau announced its intent to establish a petroleum experiment station

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

APS USER TRAINING HISTORY Background  

NLE Websites -- All DOE Office Websites (Extended Search)

USER TRAINING HISTORY USER TRAINING HISTORY Background The User Program Division Director has delegated to the CATs the authority to authorize the conduct of experiments because the CATs have accepted responsibility for: * identifying and evaluating the hazards posed by the experiment, * specifying controls appropriate to the hazards, and * verifying that controls are in place. One form of hazard control frequently made mandatory by law and laboratory policy is worker knowledge. The accepted means of verifying that a worker has the required knowledge is ensuring that the worker has completed appropriate training. With CAT input, the APS has developed the APS User Training History. This web-based tool enables designated CAT personnel to examine data characterizing ES&H training courses

282

FTCP History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

History History FTCP History In 1993, the Board issued Recommendation 93-3, Improving DOE Technical Capability in Defense Nuclear Facilities. This recommendation resulted in DOE's establishing the Federal Technical Capability Panel (FTCP) and developing two noteworthy standards: DOE M 426.1-1, Federal Technical Capability Manual, and DOE G 426.1-1, Recruiting, Hiring, and Retaining High Quality Technical Staff: A Manager's Guide to Administrative Flexibilities. These standards provide techniques and processes for improving the recruitment, retention, training, and qualification of high-quality personnel. Board Recommendation 93-3 was issued on June 1, 1993, and accepted by the Department of Energy on July 23, 1993. The Recommendation discussed the need to improve the technical capability of federal employees associated

283

NICMOS HISTORY DATABASE AND April 10, 1998  

E-Print Network (OSTI)

1 NICMOS HISTORY DATABASE AND WEB TOOLS C. Tullos April 10, 1998 ABSTRACT The history of NICMOS. The Database and Data A convenient way of keeping a history of some of the NICMOS instrument parameters parameters apply. Instrument Science Report OSG-CAL 98-01 #12;2 NICMOS HISTORY DATABASE LAYOUT 2. The Web

Sirianni, Marco

284

Laboratory automation-A case history  

Science Journals Connector (OSTI)

Laboratory automation-A case history ... This article describes an automated Raman spectrometer. ...

Bernard J. Bulkin; Edward H. Cole; Arthur Noguerola

1974-01-01T23:59:59.000Z

285

UCD School of History & Archives Student Handbook  

E-Print Network (OSTI)

UCD School of History & Archives Student Handbook 2013-2014 This handbook is relevant for all of History and Archives UCD: Student Handbook, 2013-2014 2 Table of Contents 1: Introduction and welcome from Evening Arts students study history? How does the School of history and Archives communicate with its

286

Better Buildings Network View | November 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

287

Better Buildings Network View | October 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

288

Better Buildings Network View | September 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

289

Better Buildings Network View | January 2015  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

290

Better Buildings Network View | December 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

291

The Better Buildings Neighborhood View- Fall 2011  

Energy.gov (U.S. Department of Energy (DOE))

Better Buildings Neighborhood View, from the Better Buildings Neighborhood Program of the U.S. Department of Energy.

292

Better Buildings Network View | February 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

293

California's Energy Future - The View to 2050  

E-Print Network (OSTI)

Energy Future - The View to 2050 Bin Biofuel Technology Hydrogen Ethanol from sugar and starch (e.g. , corn,

2011-01-01T23:59:59.000Z

294

The Better Buildings Neighborhood View- July 2012  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program.

295

Better Buildings Network View | April 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

296

Better Buildings Network View | May 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

297

Better Buildings Network View | March 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

298

Better Buildings Network View | June 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

299

A safety assessment of rotary mode core sampling in flammable gas single shell tanks: Hanford Site, Richland, Washington  

SciTech Connect

This safety assessment (SA) addresses each of the required elements associated with the installation, operation, and removal of a rotary-mode core sampling (RMCS) device in flammable-gas single-shell tanks (SSTs). The RMCS operations are needed in order to retrieve waste samples from SSTs with hard layers of waste for which push-mode sampling is not adequate for sampling. In this SA, potential hazards associated with the proposed action were identified and evaluated systematically. Several potential accident cases that could result in radiological or toxicological gas releases were identified and analyzed and their consequences assessed. Administrative controls, procedures and design changes required to eliminate or reduce the potential of hazards were identified. The accidents were analyzed under nine categories, four of which were burn scenarios. In SSTS, burn accidents result in unacceptable consequences because of a potential dome collapse. The accidents in which an aboveground burn propagates into the dome space were shown to be in the ``beyond extremely unlikely`` frequency category. Given the unknown nature of the gas-release behavior in the SSTS, a number of design changes and administrative controls were implemented to achieve these low frequencies. Likewise, drill string fires and dome space fires were shown to be very low frequency accidents by taking credit for the design changes, controls, and available experimental and analytical data. However, a number of Bureau of Mines (BOM) tests must be completed before some of the burn accidents can be dismissed with high confidence. Under the category of waste fires, the possibility of igniting the entrapped gases and the waste itself were analyzed. Experiments are being conducted at the BOM to demonstrate that the drill bit is not capable of igniting the trapped gas in the waste. Laboratory testing and thermal analysis demonstrated that, under normal operating conditions, the drill bit will not create high enough temperatures to initiate a propagating reaction in the waste. However, system failure that coincides in a waste layer with high organic content and low moisture may initiate an exothermic reaction in the waste. Consequently, a conservative approach based on the current state of the knowledge resulted in limiting the drilling process to a subset of the flammable-gas tanks. Accidents from the chemical reactions and criticality category are shown to result in acceptable risk. A number of accidents are shown to potentially result in containment (tank liner) breach below the waste level. Mitigative features are provided for these accidents. Gas-release events without burn also are analyzed, and radiological and toxicological consequences are shown to be within risk guidelines. Finally, the consequences of potential spills are shown to be within the risk guidelines.

Raymond, R.E.

1996-04-15T23:59:59.000Z

300

History and philosophy of psychology  

Science Journals Connector (OSTI)

... not a rehash job, for it covers many topics in the history and philosophy of psychology of which most self-respecting Anglo-Saxon psychologists are entirely innocent. This is not ... , know what is meant by phenomenology, and understand the strengths and weaknesses of Gestalt psychology. All in all, Thines' choice of topics is excellent and their range impressive. ...

William Barnes-Gutteridge

1978-03-16T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

HISTORY OF PSYCHOLOGY Psychology 805  

E-Print Network (OSTI)

1 HISTORY OF PSYCHOLOGY Psychology 805 Department of Psychology Michigan State University Spring, 2011 Class meeting times: Tuesday, Thursday, 12:40-2:30 p.m. Place: 119 Psychology Building Instructor: L.J. Harris Office: 217 Psychology Building Office Hours: Mondays, 3:00 - 5 p.m.; other times

Liu, Taosheng

302

HISTORY OF PSYCHOLOGY Psychology 805  

E-Print Network (OSTI)

1 HISTORY OF PSYCHOLOGY Psychology 805 Department of Psychology Michigan State University Fall, 2012 Class meeting times: Tuesday, Thursday, 12:40-2:30 p.m. Place: 120 Psychology Building Instructor: L.J. Harris Office: 217 Psychology Building Office Hours: Mondays, 3:00 - 5 p.m.; other times

Liu, Taosheng

303

History of federal transportation policy  

E-Print Network (OSTI)

History of federal transportation policy TTP 220 S. Handy 4/7/14 #12;Federal Transportation Policy · Rise of road building (1910s +) · Rise of mandated planning (1960s +) · Rise of transit funding (1960s for road building support from the start! · Cars seen as way to decentralize, to get people away from ills

Handy, Susan L.

304

The history of the LHC  

ScienceCinema (OSTI)

Abstract: From the civil engineering, to the manufacturing of the various magnet types, each building block of this extraordinary machine required ambitious leaps in innovation. This lecture will review the history of the LHC project, focusing on the many challenges -- scientific, technological, managerial -- that had to be met during the various phases of R&D;, industrialization, construction, installation and commissioning.

None

2011-10-06T23:59:59.000Z

305

Invited paper History of Semiconductors  

E-Print Network (OSTI)

Abstract—The history of semiconductors is presented beginning with the first documented observation of a semiconductor effect (Faraday), through the development of the first devices (point-contact rectifiers and transistors, early field-effect transistors) and the theory of semiconductors up to the contemporary devices (SOI and multigate devices). Keywords—band theory, laser, Moore’s law, semiconductor, transistor.

Lidia ?ukasiak; Andrzej Jakubowski

306

Economic History Revisited: New Uncertainties  

E-Print Network (OSTI)

to the southern and midwestern regions of the United States. However, the large run-up in oil prices is increasingEconomic History Revisited: New Uncertainties I n the last Sitar-Rutgers Regional Report, we are paying ever-increasing prices for fewer available sites. Warehouse sites in the southern portion

307

US Energy Service Company Industry: History and Business Models  

Office of Energy Efficiency and Renewable Energy (EERE)

Information about the history of US Energy Service Company including industry history, setbacks, and lessons learned.

308

Earth Repair: A Transatlantic History of Environmental Restoration  

E-Print Network (OSTI)

Earth Repair: A Transatlantic History of EnvironmentalHall. Earth Repair: A Transatlantic History of Environmental

Hamilton-Smith, Elery

2006-01-01T23:59:59.000Z

309

Insights On The Thermal History Of The Valles Caldera, New Mexico- Evidence  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » Insights On The Thermal History Of The Valles Caldera, New Mexico- Evidence From Zircon Fission-Track Analysis Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: Insights On The Thermal History Of The Valles Caldera, New Mexico- Evidence From Zircon Fission-Track Analysis Details Activities (2) Areas (1) Regions (0) Abstract: The zircon fission-track dating method was applied to the VC-2B core obtained from the active hydrothermal system at Sulphur Springs, Valles caldera, New Mexico. Four samples were analyzed to obtain both zircon ages and track length data from Permian strata to Precambrian quartz

310

Street Light View: Enriching Navigable Panoramic Street View Maps with Informative Illumination Thumbnails  

E-Print Network (OSTI)

1 Street Light View: Enriching Navigable Panoramic Street View Maps with Informative Illumination, Stony Brook University ABSTRACT Google Street View is a technology featured in Google Maps and Google Earth that provides panoramic and immersive views of street scenes in many cities around the world

Mueller, Klaus

311

TotalView Parallel Debugger at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Totalview Totalview Totalview Description TotalView from Rogue Wave Software is a parallel debugging tool that can be run with up to 512 processors. It provides both X Windows-based Graphical User Interface (GUI) and command line interface (CLI) environments for debugging. The performance of the GUI can be greatly improved if used in conjunction with free NX software. The TotalView documentation web page is a good resource for learning more about some of the advanced TotalView features. Accessing Totalview at NERSC To use TotalView at NERSC, first load the TotalView modulefile to set the correct environment settings with the following command: % module load totalview Compiling Code to Run with TotalView In order to use TotalView, code must be compiled with the -g option. We

312

History  

NLE Websites -- All DOE Office Websites (Extended Search)

4 31 | Next | Last Back to Index Target Bay Foundation One unique challenge was creating the foundation for the NIF target bay, which is about 15 meters below ground level....

313

History  

NLE Websites -- All DOE Office Websites (Extended Search)

2 31 | Next | Last Back to Index NIF Groundbreaking Lawrence Livermore National Laboratory Director Bruce Tarter, Secretary of Energy Federico Pena, and Congresswoman Ellen...

314

History  

NLE Websites -- All DOE Office Websites (Extended Search)

The U.S. Department of Energy (DOE) has provided radioisotope thermoelectric generators for space applications since 1961. These generators provide electrical power for spacecraft...

315

History  

NLE Websites -- All DOE Office Websites (Extended Search)

equipment. The chamber, a sphere ten meters (33 feet) in diameter, is covered with boron-injected concrete to absorb neutrons during NIF experiments. Photo Number: NIF-1209-18055...

316

History  

NLE Websites -- All DOE Office Websites (Extended Search)

5 31 | Next | Last Back to Index NIF at Night Crews often worked around the clock to build the stadium-size facility. Construction required more than 4,600 metric tons of...

317

History  

NLE Websites -- All DOE Office Websites (Extended Search)

6 31 | Next | Last Back to Index Nova Target Chamber In 1986, Nova produced the largest laser fusion yield to date - a record 11 trillion fusion neutrons. The following year,...

318

History  

NLE Websites -- All DOE Office Websites (Extended Search)

Index Switchyard Construction The switchyards' support structures are built to resist vibration. They are firmly anchored to the building's reinforced concrete walls, which are 0.6...

319

History  

NLE Websites -- All DOE Office Websites (Extended Search)

convert infrared light to ultraviolet. Nova experiments provided confidence that a NIF-size laser could achieve thermonuclear ignition in a laboratory. Photo Number: NIF-1109-17878...

320

History  

NLE Websites -- All DOE Office Websites (Extended Search)

9 31 | Next | Last Back to Index The Final "Golden Bolt" NIF and Photon Science Principal Associate Director Ed Moses honors a NIF contract worker by presenting him with the...

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

A PHILOSOPHICAL VIEW OF CIVILIZATION  

Science Journals Connector (OSTI)

Publisher Summary Civilization comprises the dynamic interchange or “transaction” between three open entities—human nature, values and environment, physical and ideal—and can be understood only as their “emergence” or “transcendence.” The scientific and technological age views civilization in East or West largely in the context of man's control and manipulation of nature. The furniture and appurtenances of civilized living, the scaffolding and the frame-work rather than the mansion itself loom larger in the picture. However, the mansion of civilization is represented by the insights, appreciations, values and aspirations of mankind. It is these enduring experiences of the race which embody the essence of civilization and should obtain primary consideration in any adequate treatment. As the philosophy of science and technology makes a tour round the globe, the meanings, appreciations, and values that civilization actually experiences in its orientation to cosmos and to existence as a whole are discounted as metaphysical and religious—irrelevant for modern secular culture.

RADHAKAMAL MUKERJEE

2014-01-01T23:59:59.000Z

322

A View from the Bridge - DOE Perspective | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A View from the Bridge - DOE Perspective A View from the Bridge - DOE Perspective Broad view of DOE's approach to addressing transportation sector oil dependence...

323

Better Buildings Network View | April 2014 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Network View | April 2014 Better Buildings Network View | April 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings...

324

September 2013 Most Viewed Documents for Biology And Medicine | OSTI, US  

Office of Scientific and Technical Information (OSTI)

September 2013 Most Viewed Documents for Biology And Medicine September 2013 Most Viewed Documents for Biology And Medicine Drug Retention Times Center for Human Reliability Studies (2007) 29 Oleoresin Capsicum toxicology evaluation and hazard review Archuleta, M.M. (1995) 27 SURVEY OF NOISE SUPPRESSION SYSTEMS FOR ENGINE GENERATOR SETS. KRISHNA,C.R. (1999) 27 Site-Directed Research and Development FY 2012 Annual Report , (2013) 27 Human radiation studies: Remembering the early years. Oral history of Donner Lab Administrator Baird G. Whaley, August 15, 1994 NONE (1995) 26 Degradation of high concentrations of glycols, antifreeze, and deicing fluids Strong-Gunderson, J.M.; Wheelis, S.; Carroll, S.L.; Waltz, M.D.; Palumbo, A.V. (1995) 24 Human radiation studies: Remembering the early years. Oral history of Dr. George Voelz, M.D., November 29, 1994

325

Rebekah Foster-Terry Oral History  

E-Print Network (OSTI)

Oral history interview with Reverend Rebekah Foster-Terry conducted by Stephanie Meador in 2009. In this interview, Rev. Foster-Terry, pastor of the Victory Tabernacle Church in Topeka, Kansas, discusses the history of the ...

Foster-Terry, Rebekah; Meador, Stephanie Rae

2009-01-01T23:59:59.000Z

326

Scepticism and the Study of History  

Science Journals Connector (OSTI)

During the two centuries prior to the publication of David Hume’s History of England, the attitude of the sceptical thinkers regarding the study of history had changed greatly. The ancient Greek sceptics and the ...

Richard H. Popkin

1970-01-01T23:59:59.000Z

327

The History of DEER | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

The History of DEER The History of DEER Presentation given at the 2007 Diesel Engine-Efficiency & Emissions Research Conference (DEER 2007). 13-16 August, 2007, Detroit, Michigan....

328

Well Record or History | Open Energy Information  

Open Energy Info (EERE)

History Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- OtherOther: Well Record or HistoryLegal Published NA Year Signed or Took Effect 2013...

329

14.731 Economic History, Fall 2003  

E-Print Network (OSTI)

A survey of world economic history, designed to introduce economics graduate students to the subject matter and methodology of economic history. Topics chosen to show a wide variety of historical experience and illuminate ...

Temin, Peter

330

Fisheries Science & Management: a Brief History  

E-Print Network (OSTI)

: a brief history ·Late 1800s: industrial revolution allowed rapid expansion of exploitation ·E in 1882 #12;Fisheries sci & mgt: a brief history ·Late 1800s: industrial revolution allowed rapid

Limburg, Karin E.

331

Report. ‘Web of Science History’ project  

Science Journals Connector (OSTI)

...September 2002 research-article Report. Web of Science History project J. Corden Archivist...Heritage Lottery Fund awarded 43,000 to the Web of Science History project, which was put...hosted by the Public Record Office at Kew. Web Of Science History|The Royal Society...

2002-01-01T23:59:59.000Z

332

BOSTON UNIVERSITY HISTORY OF ART & ARCHITECTURE  

E-Print Network (OSTI)

BOSTON UNIVERSITY HISTORY OF ART & ARCHITECTURE GRADUATE PROGRAM 2012-2013 Information & Architecture College of Arts & Sciences 725 Commonwealth Avenue, Room 302 Boston, MA 02215 Tel: (617) 353 ..................................................................... 5 THE MA DEGREE IN HISTORY OF ART AND ARCHITECTURE ........................ 5 History of Art

Goldberg, Bennett

333

The battle of batteries: a history of innovation in alternative energy cars  

Science Journals Connector (OSTI)

The paper gives a global view on the historical development of electrical cars. It is a history described in five major waves; the first one starting about 1835 and the last one ending about 2000. With two cases, important aspects of the two last waves are described in detail. The cases are the French VEL car and the Norwegian Think car. They have had their more specific setbacks. Problems in electrochemistry have caused important limitations, as they have through the whole history of electrical cars. This is the background for the paper title: The Battle of Batteries.

Karl G. Hoyer

2007-01-01T23:59:59.000Z

334

The Better Buildings Neighborhood View- October 2012  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Neighborhood View monthly newsletter from the U.S. Department of Energy's Better Buildings Neighborhood Program - October 2012

335

Fibrations and universal view updatability Michael Johnson  

E-Print Network (OSTI)

Fibrations and universal view updatability Michael Johnson Computing Department, Macquarie methods to manage the complexity. Dampney and Johnson [25] first showed how data models based on entity

Johnson, Michael

336

Fibrations and universal view updatability Michael Johnson  

E-Print Network (OSTI)

Fibrations and universal view updatability Michael Johnson Computing Department, Macquarie and Johnson [25] first showed how data models based on entity-relationship (ER) diagrams [10] are enhanced

Rosebrugh, Robert

337

Winnipegosis case history: Tableland Saskatchewan  

SciTech Connect

The geology and history of exploration in the Tableland area of southeast Saskatchewan will be reviewed in relation to a major Middle Devonian Winnipegosis oil discovery made in 1986 by Home Oil. Southern Saskatchewan is underlain by the northern third of the Williston basin. Although rich oil deposits have been found in the Devonian of the basin on the American side, dry holes have been the rule in Saskatchewan except for the Hummingbird Upper Devonian Birdbear discovery in 1966. The long history of failures in the Winnipegosis Formation had led to a general reluctance in the industry to drill deep wells especially with today's lower crude prices. Based on geology, seismic data, and modeling, Home Oil drilled Tableland 08-22-002-09W2M in february 1986 and encountered an oil-bearing Winnipegosis reef. This well has the highest production rate of any well in Saskatchewan and is the first commercially significant Winnipegosis well in a basinal setting within the Williston basin. A state-of-the-art pseudo 3-D processing of all the existing 2-D seismic data was performed to aid in choosing development well locations. As a result of this discovery, deep exploration plays in southeast Saskatchewan are now being pursued aggressively by many companies.

Orr, N.E.; Martindale, W.

1988-02-01T23:59:59.000Z

338

A Long View Of The Energy Market  

Science Journals Connector (OSTI)

A Long View Of The Energy Market ... Billionaire philanthropist and Microsoft Chairman Bill Gates and Nobel Prize-winning physicist and Energy Secretary Steven Chu hold similar views on the importance of finding new sources of inexpensive energy to better the plight of the world’s poor—as well as to make money. ...

JEFF JOHNSON

2012-03-19T23:59:59.000Z

339

User_Sup_ViewEmpMatrix  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

an Employee Matrix (Supervisor) an Employee Matrix (Supervisor) © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Viewing an Employee Matrix (Supervisor) Purpose The purpose of this job aid is to guide supervisor users through the step-by-step process of viewing an employee matrix within SuccessFactors Learning. Task A. View an Employee Matrix From the Home page, click the My Employees tab. Click the Employee Matrix supervisor link. Click the Change Measures expand arrow ( ) to select criteria for comparison. View an Employee Matrix 8 Steps Task A 3 3 1 1 2 2 SuccessFactors Learning v 6.4 User Job Aid Viewing an Employee Matrix (Supervisor) © 2011 SuccessFactors, Inc. - 2 - SuccessFactors Learning Select a measure for the

340

Mountain View Grand | Open Energy Information  

Open Energy Info (EERE)

Grand Grand Jump to: navigation, search Name Mountain View Grand Facility Mountain View Grand Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner Mountain View Grand Developer Sustainable Energy Developments Energy Purchaser Mountain View Grand Location Mountain View Grand Resort & Spa NH Coordinates 44.397987°, -71.590306° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":44.397987,"lon":-71.590306,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Department of Energy, 1977-1994, A Summary History | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy, 1977-1994, A Summary History Department of Energy, 1977-1994, A Summary History history fo the Department of Energy Department of Energy, 1977-1994, A Summary History More...

342

ARM Orientation: Overview and History  

NLE Websites -- All DOE Office Websites (Extended Search)

ARM Orientation: ARM Orientation: Overview and History Warren Wiscombe ARM Chief Scientist Brookhaven & NASA ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement 2 Mar 2006 ARM Orientation You want me to be Chief Scientist? Can you believe this guy? ARM ARM Atmospheric Radiation Measurement Atmospheric Radiation Measurement 3 Mar 2006 ARM Orientation ARM in a nutshell ARM in a nutshell * * Largest global change research program Largest global change research program funded by the U.S. Department of Energy funded by the U.S. Department of Energy ($44M/yr; ~ ($44M/yr; ~ $10M/yr fo $10M/yr fo r Science Team r Science Team ) ) * * Created to improve cloud and radiation Created to improve cloud and radiation physics and cloud simulation capabilities in physics and cloud simulation capabilities in

343

Crude Oil and Natural Gas Drilling Activity  

Gasoline and Diesel Fuel Update (EIA)

Jul-14 Aug-14 Sep-14 Oct-14 Nov-14 Dec-14 View History Rotary Rigs in Operation 1,876 1,904 1,930 1,924 1,925 1,882 1973-2014 By Site Onshore 1,819 1,842 1,866 1,867 1,872 1,824...

344

Crude Oil and Natural Gas Drilling Activity  

NLE Websites -- All DOE Office Websites (Extended Search)

Jun-14 Jul-14 Aug-14 Sep-14 Oct-14 Nov-14 View History Rotary Rigs in Operation 1,861 1,876 1,904 1,930 1,924 1,925 1973-2014 By Site Onshore 1,804 1,819 1,842 1,866 1,867 1,872...

345

Our History | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

History | National Nuclear Security Administration History | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Our History Home > About Us > Our History Our History The NNSA was established by Congress in 2000 as a separately organized agency within the U.S. Department of Energy, responsible for the management and security of the nation's nuclear weapons, nuclear nonproliferation,

346

Virtual Museum Captures Ohio Plant History: Web-based Project Preserves  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Virtual Museum Captures Ohio Plant History: Web-based Project Virtual Museum Captures Ohio Plant History: Web-based Project Preserves Plant's Uranium Enrichment Legacy Virtual Museum Captures Ohio Plant History: Web-based Project Preserves Plant's Uranium Enrichment Legacy May 21, 2012 - 12:00pm Addthis An online museum on the Portsmouth Gaseous Diffusion Plant went live earlier this year. An online museum on the Portsmouth Gaseous Diffusion Plant went live earlier this year. PIKETON, Ohio - Do you wonder what the interior of a uranium enrichment plant looks like without ever stepping foot in the facility? Now, the public can view photos, watch interviews with current and former workers who share historical accounts and browse old newsletters on the Portsmouth Gaseous Diffusion Plant from as far back as the early 1950s with

347

Virtual Museum Captures Ohio Plant History: Web-based Project Preserves  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Virtual Museum Captures Ohio Plant History: Web-based Project Virtual Museum Captures Ohio Plant History: Web-based Project Preserves Plant's Uranium Enrichment Legacy Virtual Museum Captures Ohio Plant History: Web-based Project Preserves Plant's Uranium Enrichment Legacy May 21, 2012 - 12:00pm Addthis An online museum on the Portsmouth Gaseous Diffusion Plant went live earlier this year. An online museum on the Portsmouth Gaseous Diffusion Plant went live earlier this year. PIKETON, Ohio - Do you wonder what the interior of a uranium enrichment plant looks like without ever stepping foot in the facility? Now, the public can view photos, watch interviews with current and former workers who share historical accounts and browse old newsletters on the Portsmouth Gaseous Diffusion Plant from as far back as the early 1950s with

348

The History of Element 43—Technetium  

Science Journals Connector (OSTI)

The History of Element 43—Technetium ... Department of Mining, Metallurgical and Materials Engineering, Laval University, G1K 7P4 Quebec City, Canada ...

Fathi Habashi

2006-02-01T23:59:59.000Z

349

1 Introduction 4 1.1 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *  

E-Print Network (OSTI)

Contents 1 Introduction 4 1.1 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . * * 4 1.1.1 Early Experimental Work . . . . . . . . . . . . . . . . 4 1.2 Structure of This Paper

Martin, Alain

350

A Postage Stamp History of Chemistry  

Science Journals Connector (OSTI)

An earlier historical article in Applied Spectroscopy used postage stamps to provide colorful illustrations for a short history of spectroscopy. Since the Editor has kindly...

Miller, Foil A

1986-01-01T23:59:59.000Z

351

A History of the Atomic Energy Commission  

Energy.gov (U.S. Department of Energy (DOE))

A History of the Atomic Energy Commission - written by Alice L. BuckWashington, D.C.: U.S. Department of Energy, July 1983. 41 pp. 

352

Berkeley Lab View -- March 28, 2008  

NLE Websites -- All DOE Office Websites (Extended Search)

March 28th, 2008 Search the View Archive March 28th, 2008 Search the View Archive State of the Lab: New Initiatives, Construction Daniel Chemla (1940-2008): A Remembrance of His Career The View is Going Green DOE Excellence Award to Foundry Project Team Berkeley Lab View Here Comes BELLA: The BErkeley Lab Laser Acceleration Project Berkeley Lab Science Roundup State of the Lab: New Initiatives, Construction By Lynn Yarris image Photo by Roy Kaltschmidt, CSO Free electron lasers with attosecond capabilities, a high-energy electron accelerator less than a meter in length, the arrival of NERSC-6 and the departure of GELCO-4 were some of the highlights of Berkeley Lab Director Steve Chu's State-of-the-Lab address, which he delivered at the Building 50 Auditorium during the noon hour on March 10, with simulcast to the

353

JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR)  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this job aid is to guide supervisor users through the step-by-step process of viewing an employee matrix within SuccessFactors Learning.

354

Incorporating video into Google Mobile Street View  

E-Print Network (OSTI)

Mobile Street View is a compelling application but suffers from significant latency problems, especially in limited bandwidth circumstances. Currently, the application uses static images to display street level information. ...

Wright, Christina (Christina E.)

2010-01-01T23:59:59.000Z

355

1,425 Views Healthcare Technology  

E-Print Network (OSTI)

Molecules into Targeted Cells (/healthtech/1863- nanotechnology/6022- researchers;NANOTECHNOLOGY (/HEALTHTECH/1863-NANOTECHNOLOGY) May 22, 2013 View Comments (/healthtech/1863-nanotechnology/6022, diagnostics, and drug delivery toward the promise of personalized medicine." A paper describing the research

Espinosa, Horacio D.

356

The History of the Microscope  

NLE Websites -- All DOE Office Websites (Extended Search)

the Microscope the Microscope Nature Bulletin No. 506 November 9, 1957 Forest Preserve District of Cook County Daniel Ryan, President Roberts Mann, Conservation Editor David H. Thompson, Senior Naturalist THE HISTORY OF THE MICROSCOPE During that historic period known as the Renaissance, after the "dark" Middle Ages, there occurred the inventions of printing, gunpowder and the mariner's compass, followed by the discovery of America. Equally remarkable was the invention of the microscope: an instrument that enables the human eye, by means of a lens or combinations of lenses, to observe enlarged images of tiny objects. It made visible the fascinating details of worlds within worlds. Long before, in the hazy unrecorded past, someone picked up a piece of transparent crystal thicker in the middle than at the edges, looked through it, and discovered that it made things look larger. Someone also found that such a crystal would focus the sun's rays and set fire to a piece of parchment or cloth. Magnifiers and "burning glasses" are mentioned in the writings of Seneca and Pliny the Elder, Roman philosophers during the first century A. D., but apparently they were not used much until the invention of spectacles, toward the end of the 13th century. They were named lenses because they are shaped like the seeds of a lentil.

357

The History of Arbor Day  

NLE Websites -- All DOE Office Websites (Extended Search)

Arbor Day Arbor Day Nature Bulletin No. 227-A April 23, 1966 Forest Preserve District of Cook County Seymour Simon, President Roland F. Eisenbeis, Supt. of Conservation THE HISTORY OF ARBOR DAY Most holidays remind us of past events, but Arbor Day, set aside for the planting of trees, looks toward the future. That is truly conservation. Conservation may be defined as the wise use of all our natural resources for the permanent good of all the people . It is a way of living that looks toward the future. The idea of Arbor Day started on January 4, 1872, when J. Sterling Morton, then a member of the Nebraska Board of Agriculture, introduced a resolution that: "Wednesday, the tenth day of April, 1872, be and the same is hereby especially set apart and consecrated for the planting of trees in the State of Nebraska and the State Board of Agriculture hereby name it Arbor Day; and to urge upon the people of the State the vital importance of tree planting .... .

358

LAMPF reliability history and program  

Science Journals Connector (OSTI)

Many years of service of the 800?MeV LAMPF H+/H? linac offers the opportunity to evaluate the long?term reliability characteristics of a high?power machine which with up to 800?kW beam power available is as close to an ADTT machine as exists in the world today. Records from the last 15 years of operation were analyzed for trends and areas of deteriorating reliability or disproportionate downtime and used to support engineering judgment on facility refurbishment to regain beam availability. This round of analysis has helped define a further level of detail and automation to be implemented in availability recording. Interesting features which emerge from the history include a clear measurement of the lower availability in the first operating cycle following extended maintenance periods and a consistent picture of the highest availability to be expected in extended operating periods with the facility as used and maintained. The results provide a starting point for informed discussion of reliability goals.

Olin van Dyck

1995-01-01T23:59:59.000Z

359

A Brief History of Mass Spectrometry  

Science Journals Connector (OSTI)

A Brief History of Mass Spectrometry ... More complete histories of MS are available both in print (e.g., Ref. 1) and on the web. ... He began his academic career as an electrical engineer but, because of the paucity of engineering courses available at the time, eventually turned to physics for his graduate work at the Minnesota. ...

Jennifer Griffiths

2008-07-31T23:59:59.000Z

360

Center for History of Chemistry Inaugurated  

Science Journals Connector (OSTI)

Center for History of Chemistry Inaugurated ... The center already is laying out an active and varied set of programs to discover and disseminate information about chemical historical resources and to encourage research, scholarship, and popular writing about the history of chemistry, chemical engineering, and chemical process industries. ...

RICHARD J. SELTZER

1983-04-04T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Report. ‘Web of Science History’ project  

Science Journals Connector (OSTI)

...by the Public Record Office at Kew. Web Of Science History|The Royal Society|Public Record Office| 383 Notes Rec. R...Aids for the History of Science, Technology and the...through the Public Record Office site, it is possible...

2002-01-01T23:59:59.000Z

362

Hypothetical Temporal Reasoning with History (Extended Version)  

E-Print Network (OSTI)

a history--encoding based methodology developed by Chomicki for checking dynamic database integrityHypothetical Temporal Reasoning with History Encoding (Extended Version) Marcelo Arenas constraints into a situation­calculus based specification of database updates as proposed by Reiter. By doing

Bertossi, Leopoldo

363

HISTORY OF WEATHER OBSERVATIONS MOUNT AUBURN, OHIO  

E-Print Network (OSTI)

HISTORY OF WEATHER OBSERVATIONS MOUNT AUBURN, OHIO 1861 - 1881 October 2004 Prepared By Glen Conner Center under the auspices of the Climate Database Modernization Program, NOAA's National Climatic Data;1 HISTORY OF WEATHER OBSERVATIONS MOUNT AUBURN, OHIO 1861-1881 Glen Conner Kentucky State Climatologist

Maynard, J. Barry

364

Fostering the rebirth of natural history  

Science Journals Connector (OSTI)

...Hampton 1 * Terry A. Wheeler 2 * Author for correspondence...past the forensic study of natural history...detailed natural history studies, museum collections...access to natural systems by the general public...was designed to foster stimulating discourse...and environmental studies exploit a tiny fraction...

2012-01-01T23:59:59.000Z

365

Archives and History Office: Digital Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Resources > Digital Resources Resources > Digital Resources Digital Resources Informal History, Part 1 The Histories page provides publications that examine SLAC history or particular events, experiments, and equipment. Publications are listed in reverse chronological order (i.e. newest listed first). Edward L. Ginzton and the MARK III accelerator at Stanford University as it nears its completion in 1952. Copies of Stanford University Physics Department Project M Reports held by the SLAC Archives and History Office, including those produced by the Microwave Lab, and the High-Energy Physics Lab (HEPL) have been scanned and are now available online. Linac construction site showing curved and straight sections in rain and mud, 1963. Copies of ABA reports held by the SLAC Archives have been scanned and are now available online along with a list of ABA numbered reports relating to the development of the SLAC proposal and known to the SLAC Archives and History Office.

366

The Manhattan Project National Security History Series  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Manhattan Project National Security History Series 5 Visit our Manhattan Project web site: http://www.cfo.doe.gov/me70/manhattan/index.htm 5 DOE/MA-0002 Revised F. G. Gosling Office of History and Heritage Resources Executive Secretariat Office of Management Department of Energy January 2010 The Manhattan Project National Security History Series 5 National Security History Series Volume I: The Manhattan Project: Making the Atomic Bomb Volume II: Building the Nuclear Arsenal: Cold War Nuclear Weapons Development and Production, 1946-1989 (in progress) Volume III: Nonproliferation and Stockpile Stewardship: The Nuclear Weapons Complex in the Post-Cold War World (projected) The National Security History Series is a joint project of the Office

367

Effects of alternate fuels report No. 8: analysis of degradiation of magnesia-based refractory bricks from a residual oil-fired rotary cement kiln  

SciTech Connect

Residual oil was used as an alternate fuel to natural gas to supply heat in a rotary cement kiln. Principal impurities in the residual oil were Ca, Fe, Mg, Na, Ni, P.S. and V. the kiln operators were concerned about the effects of these oil impurities on observed degradation of the magnesia-based bricks used as a liner in the burning zone of the kiln. Two degraded bricks, which had been in service for six to nine months, were analyzed to determine the role of fuel impurities on the observed degradation. The maximum hot-face temperature of the refractory during service was about 1500/sup 0/C. One brick had decreased in thickness about 45%, the about 15%. Various analytical measurements on these samples failed to reveal the presence of fuel impurities at or near the hot face of the bricks, and therefore it is concluded that the relatively short service life of these refractories was not due to use of residual oil as the fuel in the kiln. The observed degradation, therefore, was attributed to other reactions and to thermal mechanical conditions in the kiln, which inevitably resulted in extensive erosion of the bricks.

Federer, J.I.; Tennery, V.J.

1980-05-01T23:59:59.000Z

368

CRSP Transmission Sales Rate History  

NLE Websites -- All DOE Office Websites (Extended Search)

Updated: 12/20/2013 Updated: 12/20/2013 CRSP Transmission Sales Rate History Rate Schedule Effective Dates Nonfirm (Mills/kWh) Firm ($/kW-yr.) Firm ($/kW-mo.) None Through 3/83 1.000 $ 6.60 $0.55 SP-FT1 4/83 - 6/86 N.A. $10.27 $0.86 SP-NFT1 4/83 - 6/86 2.000 N.A. SP-FT2 7/86 - 6/89 N.A. $15.94 $1.33 SP-NFT2 7/86 - 7/89 3.100 N.A. SP-FT3 7/89 - 9/92 N.A. $21.72 $1.81 SP-NFT3 8/89 - 3/98 Mutually Agreed N.A. SP-FT4 10/92 - 3/98 N.A. $22.68 $1.89 SP-NFT4 4/98 - 3/03 Mutually Agreed N.A. SP-PTP5 4/98 - 3/99 N.A. $26.70 $2.23 4/99 - 3/00 N.A. $26.19 $2.18 4/00 - 3/01 N.A. $26.14 $2.18 4/01 - 3/02 N.A. $25.63 $2.14 4/02 - 9/02 N.A. $21.33 $1.78 SP-NFT5 10/02 - 9/07 Mutually Agreed N.A. 10/07-9/08 Mutually Agreed N.A. SP-PTP6 10/02 - 9/03 N.A. $24.72 $2.06

369

Better Buildings Network View | January 2014 | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2014 Better Buildings Network View | January 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential...

370

Better Buildings Network View | March 2014 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 2014 Better Buildings Network View | March 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential...

371

Better Buildings Network View | May 2014 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

May 2014 Better Buildings Network View | May 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network....

372

Better Buildings Network View | September 2014 | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 2014 Better Buildings Network View | September 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential...

373

Better Buildings Network View | February 2014 | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 2014 Better Buildings Network View | February 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential...

374

Better Buildings Network View | June 2014 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

June 2014 Better Buildings Network View | June 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network....

375

Valley View Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Wind Farm Wind Farm Jump to: navigation, search Name Valley View Wind Farm Facility Valley View Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Juhl Wind Developer Valley View Transmission Energy Purchaser Xcel Energy Location Outside Chandler MN Coordinates 43.905808°, -96.020508° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.905808,"lon":-96.020508,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

376

Business Apps List View | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Apps List View Apps List View BusinessUSA Data/Tools Apps Challenges Let's Talk BusinessUSA You are here Data.gov » Communities » BusinessUSA List View Showing 1 - 12 of 12 results. Resources sort ascending Type Last Updated On Traveling Entrepreneur Find green government opportunities for small businesses. The app based on your current location retrieves all the government programs and then allows you to share your favorite program on Facebook. Mobile 02/01/2012 Small Business Toolkit Small Business Toolbox provides a way to easily keep up-to-date on government programs, grants, awards, solicitations, and small business programs. Find the closest SBA district office, easily gathering license and permit information. Mobile 01/31/2012 SBIR.gov Awards Search This app allows users to search the SBIR awards database by agency, keyword, and year.

377

states apps list view | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

states apps list view states apps list view States Data Apps Challenges Policies States You are here Data.gov » Communities » States List View Showing 1 - 5 of 5 results. Resources sort ascending Type Last Updated On TrashBackwards Trash Backwards will connect you with current recycling information, Do It Yourself reuse and upcycle tutorials that are easy to follow, reliable articles and infographics, upcycled products and durable alternatives to common single-use items, and links to non-profits and other groups who will benefit greatly from the stuff you're done with. Currently includes Massachusetts and Washington. Apps 02/27/2013 MoDOT's Traveler Information Map App With the launch of MoDOT's new Traveler Information Map mobile app, Missouri travelers can get the latest information on road conditions, work zones, flooding and incidents on their iPhones and Androids. Mobile 05/22/2013

378

Toto the Robot Figure 1. Toto, front view. Figure 2. Toto, rear view.  

E-Print Network (OSTI)

Toto the Robot Figure 1. Toto, front view. Figure 2. Toto, rear view. Toto the Robot was created so in the back to allow the tape- recorder to be held inside, and the figure was spray-painted. With his metallic a robot, helps account for his lack of verbal charm. Second, some younger children may recognize in Toto

Indiana University

379

ALS History: The First 20 Years  

NLE Websites -- All DOE Office Websites (Extended Search)

History: The First 20 Years Print History: The First 20 Years Print Below is an interactive timeline covering highlights of the first 20 years of ALS history. By no means exhaustive, it is meant to provide a broad overview of the people and events that have helped shape the ALS as well as a sense of the breadth of the science that has been done here. Click on items to see more detail. Slide the blue rectangle at bottom to move forward or backward in time. Color Key: Science Highlights (green); People and Events (orange); Concurrent Events (blue); Facility Facts (purple) Tiki-Toki ALS Timeline: Science, People, and Events About this timeline This timeline shows the history of the Advanced Light Source. Slide the blue rectangle at bottom to move forward or backward in time.;xNLx;;xNLx;Color Key:;xNLx;;xNLx;Green = Science

380

ALS History: The First 20 Years  

NLE Websites -- All DOE Office Websites (Extended Search)

History: The First 20 Years Print History: The First 20 Years Print Below is an interactive timeline covering highlights of the first 20 years of ALS history. By no means exhaustive, it is meant to provide a broad overview of the people and events that have helped shape the ALS as well as a sense of the breadth of the science that has been done here. Click on items to see more detail. Slide the blue rectangle at bottom to move forward or backward in time. Color Key: Science Highlights (green); People and Events (orange); Concurrent Events (blue); Facility Facts (purple) Tiki-Toki ALS Timeline: Science, People, and Events About this timeline This timeline shows the history of the Advanced Light Source. Slide the blue rectangle at bottom to move forward or backward in time.;xNLx;;xNLx;Color Key:;xNLx;;xNLx;Green = Science

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

History of the DOE Human Genome Program  

Office of Scientific and Technical Information (OSTI)

History of the DOE Human Genome Program History of the DOE Human Genome Program The following history is taken from the U.S. Department of Energy 1991-91 Human Genome Program Report (June 1992). This is an archived item. A brief history of the U.S. Department of Energy (DOE) Human Genome Program will be useful in a discussion of the objectives of the DOE program as well as those of the collaborative U.S. Human Genome Project. The Office of Health and Environmental Research (OHER) of DOE and its predecessor agencies--the Atomic Energy Commission and the Energy Research and Development Administration--have long sponsored research into genetics, both in microbial systems and in mammals, including basic studies on genome structure, replication, damage, and repair and the consequences of genetic

382

DOE History Timeline | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Timeline Timeline DOE History Timeline DOE History Timeline The Department of Energy is one of the most interesting and diverse agencies in the Federal Government. Activated on October 1, 1977, the twelfth cabinet-level department brought together for the first time within one agency two programmatic traditions that had long coexisted within the Federal establishment: 1) defense responsibilities that included the design, construction, and testing of nuclear weapons dating from the Manhattan Project effort to build the atomic bomb during World War II; and 2) a loosely knit amalgamation of energy-related programs scattered throughout the Federal Government. The intent of the DOE History Timeline is to provide the public with easy access to accurate information about the history of DOE and its predecessor

383

Environmental History of Air Pollution and Protection  

Science Journals Connector (OSTI)

Concerns about air pollution have a long and complex history. Complaints ... of ancient Athens and Rome. But urban air quality worsened considerably during the Industrial Revolution, ... Despite the tangible natu...

Stephen Mosley

2014-01-01T23:59:59.000Z

384

The Italian National Solar Energy History Project  

Science Journals Connector (OSTI)

This poster presentation introduces “The Italian National Solar Energy History Project” (The Project) to the participants of the ISES SWC 2007. The Project is currently being promoted by the “Italian National Com...

Cesare Silvi

2009-01-01T23:59:59.000Z

385

grid history | OpenEI Community  

Open Energy Info (EERE)

the grid? black out brown out bulk power system electricity grid future grid grid history security Smart Grid transmission We all rely on it but what do you really know about our...

386

History of Beekeeping in Developing World  

Science Journals Connector (OSTI)

History depict human beings as stewards of creation, utilizing nature for human prosperity, but in order to receive the product of honeybees, or their pollination services, human beings have to care for and as...

Rakesh Kumar Gupta; M. S. Khan…

2014-01-01T23:59:59.000Z

387

Collaborative use of individual search histories  

Science Journals Connector (OSTI)

......e.g., via e-mail). During searches of both the intranet and Internet for job resolution, one engineer commented...control the automatic recording of search histories. The characteristics of this control, however, are subject to the environment......

Anita Komlodi; Wayne G. Lutters

2008-01-01T23:59:59.000Z

388

Edmund G. Brown Jr. LIFE HISTORY PARAMETERS OF  

E-Print Network (OSTI)

History Parameters of Common Marine Fish Subject to Entrainment. California Energy Commission, PIER · Renewable Energy Technologies · Transportation Life History Parameters of Common Southern California MEdmund G. Brown Jr. Governor LIFE HISTORY PARAMETERS OF COMMON SOUTHERN CALIFORNIA MARINE FISHES

389

Thirteenth Annual International Graduate Student Conference on Transatlantic History  

E-Print Network (OSTI)

Thirteenth Annual International Graduate Student Conference on Transatlantic History Thursday October 25, 2012 The University of Texas at Arlington The Transatlantic History Student Organization (THSO International Graduate Student Conference on Transatlantic History. Schedule of Panels Keynote Address Diaspora

Texas at Arlington, University of

390

The History of Cartography in a Nutshell  

E-Print Network (OSTI)

l?apertura degli spazi, vol. I, p. 26 Also: History of Cartography, vol. I, plate 5. (Online at: http://www.romansites.com/carta_dell'impero.htm) 16. Map of the London "Tube" (Online at: http://www.tfl.gov...Coordinates Series B, No. 10 The History of Cartography in a Nutshell Persistent URL for citation: http://purl.oclc.org/ coordinates/b10.pdf Date of Publication: 06/03/08 Vladimiro Valerio Vladimiro Valerio (e-mail: vladimir...

Valerio, Vladimiro

2008-06-03T23:59:59.000Z

391

Atomic Power in Space: A History  

DOE R&D Accomplishments (OSTI)

"Atomic Power in Space," a history of the Space Isotope Power Program of the United States, covers the period from the program's inception in the mid-1950s through 1982. Written in non-technical language, the history is addressed to both the general public and those more specialized in nuclear and space technologies. Interplanetary space exploration successes and achievements have been made possible by this technology, for which there is no known substitue.

1987-03-00T23:59:59.000Z

392

Global Food Security Programme Exploring public views  

E-Print Network (OSTI)

Global Food Security Programme ­ Exploring public views #12;©TNS June 2012 -1- Executive Summary significant public policy issues of this century. This scoping study for the Global Food Security programme. The project involved a total of 44 people in a two stage workshop process in London, Edinburgh and Aberystwyth

393

Evolution of self-incompatibility: Early Views  

E-Print Network (OSTI)

Evolution of self-incompatibility: Early Views: Whitehouse (1950): 1. Sudden rise of angiosperms by Whitehouse (1950). Isolation of components of the self-incompatibilities paved the way to study the evolution of SIs Matton et al. (1994): Molecular data supports Bateman. Three self-incompatibility systems

Bhattacharyya, Madan Kumar

394

CITY OF MOUNTAIN VIEW April 12, 2011 .  

E-Print Network (OSTI)

Ordinance ordinance? Projected effective date: September 1, 2011 Green building or stand-alone energy Energy Ordinance in Combination with Green Building ordinance? Do minimum energy requirements increase No afterCITY OF MOUNTAIN VIEW April 12, 2011 . CaUfomia Energy Commission Attn: Joe Loyer 1516 Ninth

395

Friction in full view A. P. Merklea  

E-Print Network (OSTI)

Friction in full view A. P. Merklea and L. D. Marksb Materials Science and Engineering proposed friction mechanisms explaining the unique tribological properties of graphite. Wear of graphite chemical or struc- tural information from the interface during a friction experi- ment. Examples

Marks, Laurence D.

396

Enlightening News and Views FM Employees  

E-Print Network (OSTI)

FM Light Enlightening News and Views From & For FM Employees November 17, 2011 Department Christmas Social Events Scholarship Winner Mechanical Rooms Clean-up Letters Let's Talk Shop SPAN on your big win Sheri! Christmas Social Events NAPE 7801 Dinner and Dance will be held at the Legion

deYoung, Brad

397

Enlightening News and Views FM Employees  

E-Print Network (OSTI)

FM Light Enlightening News and Views From & For FM Employees March 11, 2011 Department or five families have a better Christmas. Above from left to right are Yvette Walton of SPAN and Kim Wal-Mart gift certificates to the Christmas Pro- gram of The Salvation Army in December. The Salvation

deYoung, Brad

398

INVESTIGATION Retrospective View of North American Potato  

E-Print Network (OSTI)

INVESTIGATION Retrospective View of North American Potato (Solanum tuberosum L.) Breeding in the 20, Madison, Wisconsin, 53706 ABSTRACT Cultivated potato (Solanum tuberosum L.), a vegetatively propagated explore the effects of potato breeding at the genome level, we used 8303 single-nucleotide polymorphism

Douches, David S.

399

Year in Review 2007 GoddardView  

E-Print Network (OSTI)

Year in Review 2007 GoddardView National Aeronautics and Space Administration www.nasa.gov Volume 4, to stunning images from the highest-resolution satellite data products ever realized, to a visit from Security staff did a marvelous job in planning and coordinating the efforts of at least six different

Christian, Eric

400

History-Writing in Ancient Egypt  

E-Print Network (OSTI)

pp. 154-160. London: Egypt Exploration Society. Loprieno,Never had the like occurred’: Egypt’s view of its past.Encounters with Ancient Egypt. London: UCL Press. Vernus,

Popko, Lutz

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

The History of Cranfills Gap ISD  

E-Print Network (OSTI)

of study, however, was framed to present the rural Texas school from an organizational development point of view. The rural school is remembered by former students, teachers and administrators within the context of county, state and national changes...

Rudd, Charla J

2013-05-06T23:59:59.000Z

402

Building Technologies Program: History of Federal Appliance Standards  

NLE Websites -- All DOE Office Websites (Extended Search)

History of Federal History of Federal Appliance Standards to someone by E-mail Share Building Technologies Program: History of Federal Appliance Standards on Facebook Tweet about Building Technologies Program: History of Federal Appliance Standards on Twitter Bookmark Building Technologies Program: History of Federal Appliance Standards on Google Bookmark Building Technologies Program: History of Federal Appliance Standards on Delicious Rank Building Technologies Program: History of Federal Appliance Standards on Digg Find More places to share Building Technologies Program: History of Federal Appliance Standards on AddThis.com... About Standards & Test Procedures Implementation, Certification & Enforcement Rulemakings & Notices Further Guidance ENERGY STAR® Popular Links

403

Weatherization and Intergovernmental Program: History of the Weatherization  

NLE Websites -- All DOE Office Websites (Extended Search)

History History of the Weatherization Assistance Program to someone by E-mail Share Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on Facebook Tweet about Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on Twitter Bookmark Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on Google Bookmark Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on Delicious Rank Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on Digg Find More places to share Weatherization and Intergovernmental Program: History of the Weatherization Assistance Program on AddThis.com...

404

Mammoth Geothermal, A Development History | Open Energy Information  

Open Energy Info (EERE)

Geothermal, A Development History Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Mammoth Geothermal, A Development History Abstract No abstract...

405

Chronological History of Federal Energy-Efficient Product Procurement...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Chronological History of Federal Energy-Efficient Product Procurement: Executive, Legislative and Regulatory Requirements, Actions and Mandates Chronological History of Federal...

406

Crystallization screening: the influence of history on current practice  

Science Journals Connector (OSTI)

The rich history of crystallization and how that history influences current practices is described. The tremendous impact of crystallization screens on the field is discussed.

Luft, J.R.

2014-06-27T23:59:59.000Z

407

A History of Geothermal Energy Research and Development in the...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

A History of Geothermal Energy Research and Development in the United States: Exploration 1976-2006 A History of Geothermal Energy Research and Development in the United States:...

408

State Energy Program Goals, Metrics, and History | Department...  

Office of Environmental Management (EM)

State Energy Program Goals, Metrics, and History State Energy Program Goals, Metrics, and History The mission of the State Energy Program (SEP) is to provide leadership to maximize...

409

The hydrogen economy: Its history  

Science Journals Connector (OSTI)

The concept leading to a hydrogen economy lay in the work of a Nazi engineer, Lawaceck, 1968. I heard his suggestion of cheaper transfer of energy in hydrogen through pipes at a dinner in that year. A paper was published with Appleby in 1972 which was the first published document concerning that title and involving the title of A Hydrogen Economy. The first meeting was in Cornell University in 1973. In 1974 T. Nejat Veziroglu organized the first big meeting on hydrogen (900 attendees). At this meeting I presented privately to Veziroglu the possibilities of a world development and he told me that he was ready to put his organizing ability to use in spreading the ideas worldwide. However, he not only proceeded to do this but he, also a professor at the University of Miami, contributed several papers of notes, particularly the one with Awad of 1974 about the cost of pollution. Gregory worked at the Gas Research Institute from 1971 and confirmed the expectations put down by Lawaceck. Veziroglu founded the International Journal of Hydrogen Energy in 1974. Research in hydrogen was relatively low cost and therefore was taken up most eagerly by those from the newer countries. The National Science Foundation awarded Texas A&M University in 1982 a five year support for hydrogen as a fuel with the condition that half the costs be borne by at least five industrial companies. I was appointed director of the research under the grant and chose to concentrate upon the decomposition of water by solar light via an electrochemical photo fuel cell. We were able to obtain considerable increases in efficiency of decomposition of water by solar light, and at the time the work was interrupted we had 9.6 percent efficiency for decomposition. S.U.M. Khan and R. Kainthla were the principal contributors to the theory of using light via electrochemical cells for this purpose. The Texas A&M University work on hydrogen was interrupted in 1989 by the arrival of claims that one of my former students had carried out electrolysis of deuterium oxide saying that an extra unexplained heat had been observed and he suggested this heat was nuclear in origin. Later, seeking to reduce the cost of hydrogen as a fuel I involved Sol Zaromb in discussions and we came across the idea that if one included a carbon dioxide molecule obtained by removing it from the atmosphere in the structure of methanolAT, no increase in global warming would occur from the use of methanol with that condition, (published in 2008). By this condition methanol took on the largest advantage of gaseous hydrogen: That it did not cause global warming. The estimated cost of the new (anti-global warming) fuel, methanolAT was less than $30/GJ. This estimated cost could be compared with the $48/GJ which is now being supported by a French Canadian group who published an attractive book with six pages of calculations of costs. The difference between the cost estimated by this group and the costs which have been assumed by hydrogen enthusiasts in earlier times was that they took into account the auxiliary expenses which would come with the use of hydrogen, in particular the storage at high pressure. The characteristics of the new methanol to cause no global warming put that aspect of it on an equal footing to the gaseous hydrogen. The CO2 which was an essential part of the structure of methanolAT was necessary to be created in a stream, rather than directly from the atmosphere, but it was easily shown that this could be done by the use of biomass and by carbonaceous wastes. A German team under Weiderman and Grob appeared in 2008 and proceeded to suggest some extensions of the ideas which had been undergoing publication for some time. The aim of the German work was to reduce costs of a compound which they called Methasyn. The present situation is that the claim of methanolAT as a world fuel to be used without any concerns of exhaustion or pollution depends on the commercial point of view of the costs being less than that of obtaining oil from the tar sands.

John O'.M. Bockris

2013-01-01T23:59:59.000Z

410

Labs and Field Site Histories | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Historical Resources » Labs Historical Resources » Labs and Field Site Histories Labs and Field Site Histories Labs and Field Site Histories Note: Every effort is made to keep these links current and updated. Yet as many of the links below point to sites not under our direct control, some may stop working without warning . National Laboratories & Technology Centers Operations Offices & Field Sites Ames Laboratory (Iowa) -- History Chicago Office (Illinois) -- History Argonne National Laboratory (Illinois) -- Laboratory History and Timeline Fernald Environmental Management Project (Ohio) -- Site History Brookhaven National Laboratory (New York) -- Tour Brookhaven's History Grand Junction (Colorado) -- Site Description and History (pdf - less than 1MB) Fermi National Accelerator Laboratory (Illinois) -- History Idaho Operations Office (Idaho) -- Site History

411

SOAJ Search : Main View : Deep Federated Search  

Office of Scientific and Technical Information (OSTI)

SOAJ Search SOAJ Search Search Powered By Deep Web Technologies New Search Preferences Powered by Deep Web Technologies HOME ABOUT ADVANCED SEARCH CONTACT US HELP Science Open Access Journals (SOAJ) Science Open Access Journals Main View This view is used for searching all possible sources. Additional Information Keyword: Title: Additional Information Author: Fields to Match: All Any Field(s) Additional Information Date Range: Beginning Date Range Pick Year 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 toEnding Date Range Pick Year 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 1993 1992 1991 1990 DWT Logo Search Clear All Help Simple Search Select All

412

Reasearch apps list view | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Reasearch apps list view Reasearch apps list view Research Menu Data/Tools Apps Resources Let's Talk Research Alpha You are here Data.gov » Communities » Research Applications Showcase Showing 1 - 6 of 6 results. Resources sort ascending Type Last Updated On Wireless Spectrum Research & Development Senior Steering Group's Testbed Information Portal The Wireless Spectrum Research & Development Senior Steering Group's Testbed Information Portal provides information about spectrum testing facilities to government, academic, and industry researchers in need of such facilities. Apps 11/20/2012 The R&D Dashboard The R&D Dashboard beta website provides an initial look at U.S. Federal investments in science and research from two agencies: the National Institutes of Health (NIH) and the National Science Foundation (NSF) from years 2000-2009. The R&D Dashboard will expand in a future iteration to include ALL Federal research and development spending and expanded information on outputs. Apps 11/20/2012

413

consumer apps list view | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

consumer apps list view consumer apps list view Consumer Data Apps Challenges Resources About Blogs Let's Talk Feedback Consumer You are here Data.gov » Communities » Consumer Smart Disclosure Apps This page highlights apps and websites that use Smart Disclosure-style data to empower consumers to make better informed choices. The purpose is to illustrate the kinds of innovative apps-web- and mobile-based-that Smart Disclosure can fuel. The galleries below include both government-produced apps and apps created by innovators outside government that have won Federal challenges. Showing 1 - 19 of 19 results. Resources sort ascending Type Last Updated On Smart Traveler Smart Traveler, the official State Department app for U.S. travelers, invites you to see the world with easy access to frequently updated official country information, travel alerts, travel warnings, maps, U.S. embassy locations, and more. Mobile 09/14/2012

414

An nual En ergy Re view 2001  

Gasoline and Diesel Fuel Update (EIA)

An nual En ergy Re view 2001 An nual En ergy Re view 2001 The An nual En ergy Re view (AER) pres ents the En ergy In for ma tion Ad min - is tra tion's his tor i cal en ergy sta tis tics. For many se ries, sta tis tics are given for ev ery year from 1949 through 2001. The sta tis tics, ex pressed in ei ther phys i cal units or Brit ish ther mal units, cover all ma jor en ergy ac tiv i ties, in - clud ing con sump tion, pro duc tion, trade, stocks, and prices, for all ma jor en - ergy com mod i ties, in clud ing fos sil fu els, elec tric ity, and re new able en ergy sources. Pub li ca tion of this re port is re quired un der Pub lic Law 95-91 (De part ment of En ergy Or ga ni za tion Act), Sec tion 205(c), and is in keep ing with re spon - si bil i ties given to the En ergy In for ma tion Ad min is tra tion un der Sec tion

415

History and Impacts | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Appliance & Equipment Standards » About » History and Impacts Appliance & Equipment Standards » About » History and Impacts History and Impacts Appliance and equipment efficiency standards have served as one of the nation's most effective policies for improving energy efficiency. The first standards were enacted at the state level in California in 1974. At the national level, the Energy Policy and Conservation Act (EPCA) was enacted in 1975, and established a federal program consisting of test procedures, labeling, and energy targets for consumer products. EPCA was amended in 1979 and directed the Department of Energy (DOE) to establish energy conservation standards for consumer products. The National Appliance Energy Conservation Act of 1987 established minimum efficiency standards for many common household appliances. Congress set

416

SPEAR History | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

SPEAR History SPEAR History Experimental Facilities : The SPEAR Storage Ring Stanford University has a long history of involvement in the development and use of colliding-beam storage rings for particle physics research. The first such machine at Stanford was a small electron-electron collider, shaped like a figure eight, located on the main campus. A collaborative effort between physicists from Princeton and Stanford Universities, this project produced the first physics results ever obtained with the colliding-beam technique. Stanford Positron Electron Accelerating Ring The next in the succession of Stanford colliders was the SPEAR (Stanford Positron Electron Accelerating Ring) machine at SLAC, completed in 1972. SPEAR consists of a single ring some 80 meters in diameter, in which counter-rotating beams of electrons

417

The Life History of a Pond  

NLE Websites -- All DOE Office Websites (Extended Search)

History of a Pond History of a Pond Nature Bulletin No. 617 November 12, 1960 Forest Preserve District of Cook County Daniel Ryan, President Roberts Mann, Conservation Editor David H. Thompson, Senior Naturalist THE LIFE HISTORY OF A POND In the Palos division of the Forest Preserve District there is an extraordinary number of ponds and sloughs Many were created by damming the outlets from wet places; some were originally farm ponds that we have restored. The largest and probably oldest pond is located in Swallow Cliff Woods, west of the picnic area in a grove of white pines planted about 40 years ago. The pond is dying. Like most others, if undisturbed, after fifty years or so it will be forgotten because in its place there will be trees willows, cottonwoods, soft maples, and probably swamp white and bur oaks. Indeed, at one time it had already filled up until, after being drained by tile, corn was grown there.

418

Environmental Justice History | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Justice History Justice History Environmental Justice History The exact start of the environmental justice movement in America is not clear. Local groups have complained about unwanted land uses for decades. Prior to the early eighties, these local protests were considered isolated and protesting communities were complaining by themselves and not associated with others similarly situated in other communities. This isolated protesting all changed in the early 1980's and the environmental justice movement became a national social and racial protest that galvanized communities across the country seeking social justice and environmental protection. The initial environmental justice spark sprang from a Warren County, North Carolina, protest. In 1982, a small, predominately African-American community was designated to host a hazardous

419

History of Research Reactors at Brookhaven  

NLE Websites -- All DOE Office Websites (Extended Search)

History of Research Reactors at Brookhaven History of Research Reactors at Brookhaven Brookhaven National Laboratory has three nuclear reactors on its site that were used for scientific research. The reactors are all shut down, and the Laboratory is addressing environmental issues associated with their operations. photo of BGRR Brookhaven Graphite Research Reactor - Beginning operations in 1950, the graphite reactor was used for research in medicine, biology, chemistry, physics and nuclear engineering. One of the most significant achievements at this facility was the development of technetium-99m, a radiopharmaceutical widely used to image almost any organ in the body. The graphite reactor was shut down in 1969. Parts of it have been decommissioned, with the remainder to be addressed by 2011. More history

420

Recent Bhutanese Scholarship in History and Anthropology  

E-Print Network (OSTI)

. - (1999). dpal 'brug pa rin po che Zhabs drung Ngag dbang rnam rgyal gyi rnam thar, Thimphu: Dzongkha Development Commission. dGeshes Brag phug dGe 'dun rinchen (1926-1997), 69th rJe mkhanpo (1971) 'Gro bai mgon po chos rje Kun dga'legs pai rnam thar rgya... , not only to the history of Bhutan but to the history of the Himalayan region as well, is very important. Among the many scholars of past centuries, there are a number we can name more particularly: the 4th Je Khenpo, Ngawang Lhungrub3 who wrote...

Pommaret, Françoise

2000-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Reduction of iron-oxide-carbon composites: part II. Rates of reduction of composite pellets in a rotary hearth furnace simulator  

SciTech Connect

A new ironmaking concept is being proposed that involves the combination of a rotary hearth furnace (RHF) with an iron-bath smelter. The RHF makes use of iron-oxide-carbon composite pellets as the charge material and the final product is direct-reduced iron (DRI) in the solid or molten state. This part of the research includes the development of a reactor that simulated the heat transfer in an RHF. The external heat-transport and high heating rates were simulated by means of infrared (IR) emitting lamps. The reaction rates were measured by analyzing the off-gas and computing both the amount of CO and CO{sub 2} generated and the degree of reduction. The reduction times were found to be comparable to the residence times observed in industrial RHFs. Both artificial ferric oxide (PAH) and naturally occurring hematite and taconite ores were used as the sources of iron oxide. Coal char and devolatilized wood charcoal were the reductants. Wood charcoal appeared to be a faster reductant than coal char. However, in the PAH-containing pellets, the reverse was found to be true because of heat-transfer limitations. For the same type of reductant, hematite-containing pellets were observed to reduce faster than taconite-containing pellets because of the development of internal porosity due to cracking and fissure formation during the Fe2O{sub 3}-to-Fe3O{sub 4} transition. This is, however, absent during the reduction of taconite, which is primarily Fe3O{sub 4}. The PAH-wood-charcoal pellets were found to undergo a significant amount of swelling at low-temperature conditions, which impeded the external heat transport to the lower layers. If the average degree of reduction targeted in an RHF is reduced from 95 to approximately 70 pct by coupling the RHF with a bath smelter, the productivity of the RHF can be enhanced 1.5 to 2 times. The use of a two- or three-layer bed was found to be superior to that of a single layer, for higher productivities.

Halder, S.; Fruehan, R.J. [Praxair Inc., Tonawanda, NY (United States). Praxair Technological Center

2008-12-15T23:59:59.000Z

422

Solar Viewed as Triple Boon for Bishop Paiute Tribe | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Solar Viewed as Triple Boon for Bishop Paiute Tribe Solar Viewed as Triple Boon for Bishop Paiute Tribe July 1, 2014 - 8:00am Addthis What does this project do? Tribal participants...

423

Cellulosic Biofuels: Expert Views on Prospects for Advancement: Supplementary Material  

E-Print Network (OSTI)

Cellulosic Biofuels: Expert Views on Prospects for Advancement: Supplementary Material Erin Baker Keywords: Biofuels; Technology R&D; Uncertainty; Environmental policy 2 #12;1 Introduction This paper contains supplementary material for "Cellulosic Biofuels: Expert Views on Prospects for Advancement

Massachusetts at Amherst, University of

424

Enabling View-Dependent Stereoscopic Projection in Real Environments  

Science Journals Connector (OSTI)

We show how view-dependent image-based and geometric warping, radiometric compensation, and multi-focal projection enable a view-dependent stereoscopic visualization on ordinary (geometrically complex, colored and textured) surfaces within everyday environments. ...

Oliver Bimber; Gordon Wetzstein; Andreas Emmerling; Christian Nitschke

2005-10-01T23:59:59.000Z

425

Better Buildings Network View | July-August 2014 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

July-August 2014 Better Buildings Network View | July-August 2014 The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings...

426

HISTORY OF PSYCHOLOGY Psychology 405, Section 001  

E-Print Network (OSTI)

1 HISTORY OF PSYCHOLOGY Psychology 405, Section 001 Department of Psychology Michigan State University Fall, 2012 Class meeting times: Tuesday, Thursday, 12:40-2:00 p.m. Place: 120 Psychology Building Instructor: L.J. Harris Office: 217 Psychology Building Office Hours: Mondays, 3:00 - 5 p.m.; other times

Liu, Taosheng

427

Derek R. Peterson Department of History  

E-Print Network (OSTI)

for Church History, for Ethnic Patriotism and the East African Revival 2009 Elected Fellow of the Royal for Research Libraries/Cooperative Africana Microfilms Project grant to fund the `Project to Preserve and Economic Research, $1,500,000 2012 Center for Research Libraries/Cooperative Africana Microfilms Project

Edwards, Paul N.

428

A History of DROUGHT IN COLORADO  

E-Print Network (OSTI)

A History of DROUGHT IN COLORADO LESSONS LEARNED AND WHAT LIES AHEAD by Thomas B. McKee, Nolan J. Doesken, John Kleist Colorado Climate Center Atmospheric Science Department Colorado State University and Catherine J. Shrier Colorado Water Resources Research Institute in collaboration with William P. Stanton

429

State and Transition Modeling History & Current Concepts  

E-Print Network (OSTI)

management input · Friedel(1991) concentrated on thresholds ­ "...compatible with state and transition theoryState and Transition Modeling History & Current Concepts Tamzen K. Stringham Oregon State vegetation change #12;· Non-equilibrium Models (States, Transitions and Thresholds) ­ Encompass Range

430

Web History and Economics Andrew Odlyzko  

E-Print Network (OSTI)

Web History and Economics Andrew Odlyzko School of Mathematics University of Minnesota Minneapolis Abstract. In retrospect, the Web appears a very natural development, a byprod- uct of the growth of the information and communication technologies (ICT) sector. Still, the success of the Web was actually attained

Odlyzko, Andrew M.

431

History and philosophy of science at Leeds  

Science Journals Connector (OSTI)

...MA) and within the medical curriculum; and Leeds...developed for electric lighting required ever greater...resisting electrical lighting to show that the process...interest in the history of medical instrumentation, both...partnerships with the Thackray medical museum in Leeds.36...

2006-01-01T23:59:59.000Z

432

POLYPLOIDY AND THE EVOLUTIONARY HISTORY OF COTTON  

E-Print Network (OSTI)

POLYPLOIDY AND THE EVOLUTIONARY HISTORY OF COTTON Jonathan F. Wendel1 and Richard C. Cronn2 1, Cytogenetic, and Phylogenetic Framework A. Origin and Diversification of the Gossypieae, the Cotton Tribe B The cotton genus (Gossypium ) includes approximately 50 species distributed in arid to semi-arid regions

Wendel, Jonathan F.

433

100 years of history Queen's University Belfast  

E-Print Network (OSTI)

100 years of history Queen's University Belfast School of Mechanical & Aerospace Engineering Centenary 1912 - 2012 This site celebrates 100 years of electrical and mechanical engineering degrees in engineering and in engineering education. Prior to 1912 When the Queen's College Belfast was established

Martin, Ralph R.

434

AFRON $10 Robot Challenge 0.) HISTORY  

E-Print Network (OSTI)

AFRON $10 Robot Challenge 0.) HISTORY When I graduated from engineering school (many years ago) one of a paint shop. I designed a digital line scan camera interface and colorimetry equipment to provide size in the technology education curriculum and decided to use my earlier work as the basis for an affordable robotic

Napp, Nils

435

The history of nuclear weapon safety devices  

SciTech Connect

The paper presents the history of safety devices used in nuclear weapons from the early days of separables to the latest advancements in MicroElectroMechanical Systems (MEMS). Although the paper focuses on devices, the principles of Enhanced Nuclear Detonation Safety implementation will also be presented.

Plummer, D.W.; Greenwood, W.H.

1998-06-01T23:59:59.000Z

436

History of the approach to ignition  

Science Journals Connector (OSTI)

...Japan) (TFTR, USA) current-drive...DT operation TFTR (USA) 50:50 mixture...sudden loss of plasma energy to the wall accompanied...Lond. A (1999) History of the approach to...birthplace in Princeton (USA) to Ger- many and...external coils. The price is technical complexity...

1999-01-01T23:59:59.000Z

437

INVESTIGATION Inferring Admixture Histories of Human Populations  

E-Print Network (OSTI)

and apply to test for admixture among all populations from the Human Genome Diversity Project (HGDPINVESTIGATION Inferring Admixture Histories of Human Populations Using Linkage Disequilibrium Po-range migrations and the resulting admixtures between populations have been important forces shaping human genetic

Reich, David

438

Vignettes of Sweden's Computer Graphics History  

E-Print Network (OSTI)

Vignettes of Sweden's Computer Graphics History Thomas Larsson Ma¨lardalen University, Sweden Ulf Stenlund This article recounts selected historical events in the computer graphics field in Sweden, ranging early achievements in Sweden related to the rapid development of computer graphics. Table 1 lists

Larsson, Thomas

439

Thermal history sensing with thermographic phosphors  

Science Journals Connector (OSTI)

The ability to measure temperatures on high thermal loaded components in gas turbines and similar prime movers is critical during the design phase if the performance of cooling strategies is to be confirmed. Restricted access and the extreme environment mean that on-line temperature measurement is not always possible and that off-line temperature techniques employing thermal history sensors are sometimes necessary. The authors have developed a new type of sensor based on ceramic phosphors. These show bright narrow band emission that is easily detected and distinguished from the background. Crystallization phase change and diffusion are all temperature dependent processes that affect the emission characteristics and that with proper calibration can be used to form a phosphor based thermal history sensor. Results from the calibration of crystallization in Y 2 SiO 5 :Tb and its application in the form of a temperature indicating paint are reviewed. A new embodiment of the phosphor thermal history sensor concept is then presented comprising a YSZ/YAG:Dy composite applied using air plasma spraying in the form of a thermal barrier coating. The coating is shown to function as a thermal history sensor albeit with a limited dynamic range.

A. L. Heyes; A. Rabhiou; J. P. Feist; A. Kempf

2013-01-01T23:59:59.000Z

440

Amrys O. Williams History of Technology  

E-Print Network (OSTI)

Amrys O. Williams History of Technology Preliminary Exam Reading List, 2008 Supervised by Eric You Should Know about Technology (New York: Cambridge University Press, 1998). Thomas P. Hughes, Human-Built World: How to Think about Technology and Culture (Chicago: University of Chicago Press, 2004). Nina

Wisconsin at Madison, University of

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

History of Mathematics Instructor: Sam Smith  

E-Print Network (OSTI)

MED 4015 History of Mathematics Syllabus Fall 2009 Instructor: Sam Smith Office: Barbelin 212, email smith@sju.edu, x1559 Office Hours: Tue 10:00-11:30, 1:00-2:30,Thur 10:30-11:30, or by appointment

Smith, Sam

442

news & views nature genetics volume 29 october 2001 105  

E-Print Network (OSTI)

news & views nature genetics · volume 29 · october 2001 105 Since the sequence of the yeast genome

Church, George M.

443

Better Buildings Network View | July-August 2014  

Energy.gov (U.S. Department of Energy (DOE))

The Better Buildings Network View monthly newsletter from the U.S. Department of Energy's Better Buildings Residential Network.

444

Energy Efficiency in Buildings- the Utilities View  

E-Print Network (OSTI)

PAGE 1 Energy Efficiency in Buildings - the Utilities View U. K?nig RWE Energy AG The energy to lead ESL-IC-08-10-27 Proceedings of the Eighth International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 RWE... International Conference for Enhanced Building Operations, Berlin, Germany, October 20-22, 2008 RWE Energy / Energieeffizienz bei Immobilien / U. K?nig / ICEBO '08 SEITE 3 RWE ? One of the five leading Energy Companies in Europe > Nr 1 producer of electricity...

Konig, U.

445

A New View of the Cosmic Landscape  

E-Print Network (OSTI)

In this scenario, a generic meta-stable deSitter vacuum site in the cosmic landscape in string theory has a very short lifetime. Typically, the smaller is the vacuum energy of a meta-stable site, the longer is its lifetime. This view of the landscape can provide a qualitative dynamical explanation why the dark energy of our universe is so small. The argument for this scenario is based on resonance tunneling, a well-known quantum mechanical phenomenon, the topography of the landscape, and the vastness of the cosmic landscape. Mapping the topography of the landscape, even if only in a small region, will test the validity of this scenario.

S. -H. Henry Tye

2007-04-16T23:59:59.000Z

446

Colorado Stories: Interpreting HIstory for Public Audiences at the History Colorado Center.  

E-Print Network (OSTI)

??Interpreting cultural conflict at History Colorado’s communities exhibit, Colorado Stories, created a three-way dialogue between scholars, museum audiences, and community stakeholders. Four communities, Amache, Sand… (more)

Convery, William III

2012-01-01T23:59:59.000Z

447

Fundamental Aeronautics Subsonic Rotary Wing  

E-Print Network (OSTI)

services to society, including emergency medical and rescue services, security patrols, off-shore oil

448

Computational Reality XV Rotary viscometer  

E-Print Network (OSTI)

by applied forces on the surface and any volumetric forces, like gravitation or electromagnetic field proposed an apparent viscosity depending on the aforementioned component, d12, given by a power law: 12 = µ

Berlin,Technische Universität

449

Conveyor with rotary airlock apparatus  

DOE Patents (OSTI)

This invention is comprised of an apparatus for transferring objects from a first region to a second region, the first and second regions having differing atmospheric environments. The apparatus includes a shell having an entrance and an exit, a conveyer belt running through the shell from the entrance to the exit, and a horizontally mounted `revolving door` with at least four vanes revolving about its axis. The inner surface of the shell and the top surface of the conveyer belt act as opposing walls of the `revolving door`. The conveyer belt dips as it passes under but against the revolving vanes so as not to interfere with them but to engage at least two of the vanes and define thereby a moving chamber. Preferably, the conveyer belt has ridges or grooves on its surface that engage the edges of the vanes and act to rotate the vane assembly. Conduits are provided that communicate with the interior of the shell and allow the adjustment of the atmosphere of the moving chamber or recovery of constituents of the atmosphere of the first region from the moving chamber before they escape to the second region.

Kronbert, J.W.

1993-01-01T23:59:59.000Z

450

Rotary powder feed through apparatus  

DOE Patents (OSTI)

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

451

,=SIGR AKD PROL'UEim HISTORY OF  

Office of Legacy Management (LM)

=SIGR AKD PROL'UEim HISTORY =SIGR AKD PROL'UEim HISTORY /----------. OF u. 9, coliTRAcT w-74l2-FZG-1 Dcprtrnent of Energy Savannah R' ber Operations Of fii PCIBOXA Aiken. South Carolina 29801 B. I. du Pant de Neraure sad Company Alken, SC 2980s Dear Nr. Becheyars volume II, Design and Pmcurernurt Eistory of B&ford Engineer Work# and cliuton Sed-Worka, baa been reviewed for declssslficatim ln reapouae to a request fma 6. U. 0'lUs.r. xnltial revi& request was fa-aln L. ?. shal?nn&, AES, wl.ldngtoo, tq 6. n. O' P.ear. I have determiaed Volume If, Design sad ProcurePent Ehtoq of Nanford Enginaar works and ClAnton Semi-Works, may be declaseified. Aomrdingly, by my authority, Volume II is declassified effeotive Hay 4, 1964. Volume II h& bean deterdaed to contdn~ Section148 infonzation~ however, olswe lthasnotbeenreviewed

452

A History of the Southeastern Power Administration  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Southeastern Power Administration Southeastern Power Administration 1990-2010 SERVING SOUTHEAST the Distribu teD by us Department of energy southeastern Power Administration 2012 A History of the Southeastern Power Administration 1990-2010 SERVING SOUTHEAST the ii Project contribu tors Sponsor us Department of energy, southeastern Power Administration Contracting Agency us Army corps of engineers, Mobile District Author Patricia stallings, brockington and Associates, inc. Design and Editing john cason and Alicia sullivan, brockington and Associates, inc. iii AcknowleDgeMents The author gratefully acknowledges the efforts of many individuals who contributed to make this history possible. Mrs. Melissa chastain sease initiated the project and worked tirelessly to facilitate an excellent research environment and also established an efficient

453

Nuclear reactor characteristics and operational history  

Gasoline and Diesel Fuel Update (EIA)

1. Capacity and Generation, Table 3. Characteristics and Operational History 1. Capacity and Generation, Table 3. Characteristics and Operational History Table 2. U.S. Nuclear Reactor Ownership Data PDF XLS Plant/Reactor Name Generator ID Utility Name - Operator Owner Name % Owned Arkansas Nuclear One 1 Entergy Arkansas Inc Entergy Arkansas Inc 100 Arkansas Nuclear One 2 Entergy Arkansas Inc Entergy Arkansas Inc 100 Beaver Valley 1 FirstEnergy Nuclear Operating Company FirstEnergy Nuclear Generation Corp 100 Beaver Valley 2 FirstEnergy Nuclear Operating Company FirstEnergy Nuclear Generation Corp 100 Braidwood Generation Station 1 Exelon Nuclear Exelon Nuclear 100 Braidwood Generation Station 2 Exelon Nuclear Exelon Nuclear 100 Browns Ferry 1 Tennessee Valley Authority Tennessee Valley Authority 100

454

Roadmap to the Project: Oral Histories  

NLE Websites -- All DOE Office Websites (Extended Search)

Search HREX Multimedia Related Sites Feedback Search HREX Multimedia Related Sites Feedback DOE Roadmap Experiments List Oral Histories Records Series Descriptions Overview Documents Declassified Documents Project Events ACHRE Report Uranium Miners Resources Building Public Trust Department of Defense Report Human Radiation Experiments Oral Histories Health Physicist William J. Bair, Ph.D. covers the University of Rochester's radiation biology program; Bair's radionuclide inhalation research at Hanford Site; and his management of Hanford's Biology Department and Life Sciences Program. Biochemist Waldo E. Cohn, Ph.D. covers Cohn's wartime work as Biochemistry Group leader at the University of Chicago's Metallurgical Laboratory and his tenure at Oak Ridge National Laboratory, where he helped shape America's postwar isotope production and distribution policy.

455

Oral histories at the Hanford Nuclear Reservation  

SciTech Connect

The founding of the Hanford Engineering Works to produce plutonium is described. The 45-year defense mission has now been replaced with a peaceful mission, that of being the first site for massive cleanup of the 45-year nuclear waste. In order to establish a remedial investigation and feasibility plan, a process of discovery named the Technical Baseline Report must be performed; the task of this process is to discover all that is known about a proposed cleanup site (what the waste was, where did it go). When none of the documentation can answer the question, oral history is utilized. Some of the problems associated with the conduct of oral history interviews are described, particularly Hanford`s legacy of secrecy.

DeFord, D.H.

1992-03-01T23:59:59.000Z

456

Sonic Load History Recorder. I. Feasibility Study  

Science Journals Connector (OSTI)

The acoustic loads to which an aircraft is subjected during its lifetime must be known for structural?fatigue analysis in aircraft design. The Sonic Load History Recorder senses filters smooths and records some measure of the length of time the sound pressure has spent in a given level band. Sound?pressure?level distributions over long periods of time are calculated for a present?day aircraft from engine?operating parameters operational characteristics of the aircraft and from ambient atmospheric conditions. The requirements for a device which is designed to provide a useful description of acoustic loads at a point on an operational aircraft are developed on the basis of the SPL histories and fatigue criteria. [This work was supported under U. S. Air Force Contract AF 33(616)?7789.

N. Doelling; D. Noiseux

1962-01-01T23:59:59.000Z

457

The Tevatron Hadron Collider: A short history  

SciTech Connect

The subject of this presentation was intended to cover the history of hadron colliders. However this broad topic is probably better left to historians. I will cover a much smaller portion of this subject and specialize my subject to the history of the Tevatron. As we will see, the Tevatron project is tightly entwined with the progress in collider technology. It occupies a unique place among accelerators in that it was the first to make use of superconducting magnets and indeed the basic design now forms a template for all machines using this technology. It was spawned in an incredibly productive era when new ideas were being generated almost monthly and it has matured into our highest energy collider complete with two large detectors that provide the major facility in the US for probing high Pt physics for the coming decade.

Tollestrup, A.V.

1994-11-01T23:59:59.000Z

458

Quantification of uncertainty during history matching  

E-Print Network (OSTI)

technology requirements and possibly marginal investment indicators. Our method of quantifying uncertainty uses a set of history-match runs and includes a method to determine the probability density function (pdf) of future oil production (reserves... side)?????. 29 3.16 Marginal cumulative oil production correlates well with total error?.. 32 ix FIGURE Page 3.17 Weighted standard deviation is smaller than non weighted?..?..?? 37 3.18 Shows sets of weighted and non weighted mean...

Alvarado, Martin Guillermo

2004-09-30T23:59:59.000Z

459

Becoming a Physician: Rethinking the Social History  

Science Journals Connector (OSTI)

...essential part of the medical examination, the most important and relevant social history questions are rarely asked or acted on. Applying social science principles to medicine — a practice sometimes called "social medicine" — enables us to contextualize patient care to achieve more sustainable and... Since social problems affect health and treatment effectiveness, considering them in assessments and treatment plans should improve outcomes, reduce costs, and improve patient satisfaction. How should clinicians learn to explore and address social determinants of health?

Behforouz H.L.Drain P.K.Rhatigan J.J.

2014-10-02T23:59:59.000Z

460

The Palos Preserves: Part One -- Their History  

NLE Websites -- All DOE Office Websites (Extended Search)

One -- Their History One -- Their History Nature Bulletin No. 710 March 23, 1963 Forest Preserve District of Cook County Seymour Simon, President Roberts Mann, Conservation Editor THE PALOS PRESERVES - PART ONE : THEIR HISTORY . The Palos forest preserves now comprise approximately 13,750 acres of the most hilly, wooded and scenic parts of Cook county, and include almost 100 lakes, ponds and sloughs. They occupy 10,051 acres in Palos township. The remaining 3700 acres are situated in the adjoining townships of Orland, Lemont and Lyons. In 1850, when Cook county was organized into 27 townships -- now there are 38 -- one of them was called Trenton. After the first election its township board changed the name to Palos. Reputedly, that was suggested by Melanchon A. Powell, one of the earliest settlers and first postmaster of Palos (originally "Orange") because of a tradition that one of his ancestors had been a member of the crew on one of the ships commanded by Christopher Columbus when they sailed from Palos de Frontera in 1492. Palo, in Spanish, may mean a tall tree, the mast of a ship, or a promontory. Palos de Frontera was a seaport beneath a promontory on the Gulf of Cadiz, about 45 miles from Seville.

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Mountain View IV | Open Energy Information  

Open Energy Info (EERE)

IV IV Facility Mountain View IV Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner AES Wind Generation Developer AES Wind Generation Energy Purchaser Southern California Edison Co Location White Water CA Coordinates 33.95475187°, -116.7015839° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.95475187,"lon":-116.7015839,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

462

Study advances view of geopressure seals  

SciTech Connect

The last decade has seen a growing interest in the subject of fluid pressure seals and fluid flow in hydrocarbon-bearing basins. As explorationists begin to view basins in terms of coupled, dynamic, chemical, and physical processes, seemingly unrelated observations become interrelated. It is precisely the integration of geological, geochemical, and geophysical observations that opens the door for new exploration opportunities. This article lays a conceptual foundation in the area of geopressure seals and on the role of geopressure in hydrocarbon migration and accumulation in young, clastic basins. The exploration significance of geopressure can be appreciated when one considers that within the gulf Coast basin, geopressured fields, which represent only 10% of the total number of fields, account for approximately 50% of the cumulative production.

Benzing, W.M.; Shook, G.M. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

1996-05-20T23:59:59.000Z

463

The Disciplines of Engineering and History: Some Common Ground  

Science Journals Connector (OSTI)

The nature of engineering and history as disciplines are explored and found to ... on the particulars of given situations. The history of technology is paid special attention, because ... made for giving historic...

Priyan Dias

2014-06-01T23:59:59.000Z

464

Mammary Gland Development, Reproductive History, and Breast Cancer Risk  

Science Journals Connector (OSTI)

...Development, Reproductive History, and Breast Cancer...Molecular and Cellular Engineering, Stellar-Chance...Molecular and Cellular Engineering [L. A. C., C...Development, Reproductive History, and Breast Cancer...Molecular and Cellular Engineering [L. A. C., C...

Lewis A. Chodosh; Celina M. D'Cruz; Heather Perry Gardner; Seung I. Ha; Sandra T. Marquis; Jayant V. Rajan; Douglas B. Stairs; James Y. Wang; and Man Wang

1999-04-01T23:59:59.000Z

465

Western New York Nuclear Service Center: History | Department...  

Office of Environmental Management (EM)

History Western New York Nuclear Service Center: History Presentation made by Paul J. Bembia for the NTSF annual meeting held from May 14-16, 2013 in Buffalo, NY Western New York...

466

EECBG Success Story: HVAC Upgrade Saving Money, Protecting History...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HVAC Upgrade Saving Money, Protecting History EECBG Success Story: HVAC Upgrade Saving Money, Protecting History November 2, 2010 - 5:37pm Addthis A new heating and cooling system...

467

MLK Day/Black History Month DOE Celebration  

Energy.gov (U.S. Department of Energy (DOE))

Join us as the Department honors both Dr. King and Black History Month with a dialogue on the history of civil rights for all. Secretary Ernest Moniz will open our program.

468

A History or Geothermal Energy Research and Development in the...  

Energy Savers (EERE)

Energy Conversion 1976-2006 A History or Geothermal Energy Research and Development in the United States: Energy Conversion 1976-2006 A history of geothermal energy R&D in the...

469

History Matching in Parallel Computational Environments  

SciTech Connect

A novel methodology for delineating multiple reservoir domains for the purpose of history matching in a distributed computing environment has been proposed. A fully probabilistic approach to perturb permeability within the delineated zones is implemented. The combination of robust schemes for identifying reservoir zones and distributed computing significantly increase the accuracy and efficiency of the probabilistic approach. The information pertaining to the permeability variations in the reservoir that is contained in dynamic data is calibrated in terms of a deformation parameter rD. This information is merged with the prior geologic information in order to generate permeability models consistent with the observed dynamic data as well as the prior geology. The relationship between dynamic response data and reservoir attributes may vary in different regions of the reservoir due to spatial variations in reservoir attributes, well configuration, flow constrains etc. The probabilistic approach then has to account for multiple r{sub D} values in different regions of the reservoir. In order to delineate reservoir domains that can be characterized with different rD parameters, principal component analysis (PCA) of the Hessian matrix has been done. The Hessian matrix summarizes the sensitivity of the objective function at a given step of the history matching to model parameters. It also measures the interaction of the parameters in affecting the objective function. The basic premise of PC analysis is to isolate the most sensitive and least correlated regions. The eigenvectors obtained during the PCA are suitably scaled and appropriate grid block volume cut-offs are defined such that the resultant domains are neither too large (which increases interactions between domains) nor too small (implying ineffective history matching). The delineation of domains requires calculation of Hessian, which could be computationally costly and as well as restricts the current approach to some specific simulators. Therefore a robust technique to evaluate a covariance matrix, which is analogous to ''Hessian matrix'', from a set of equi-probable realizations has also been developed. This technique is easy to implement and provides the domains, which could be intuitively justified. Since the domain delineation process yields zones that are least correlated with each other, each r{sub D} parameter can be optimized independently and simultaneously using individual nodes of a cluster of computers. Further least correlation criteria help in retaining the simplicity of 1-D optimization during the history matching. Upon convergence, the perturbed regions are put together and the history match is verified. The proposed approach results in a set of independent tasks of equal magnitude and thus is particularly suited for distributed computing. The methodology has been successfully tested on various synthetic cases.

Steven Bryant; Sanjay Srinivasan; Alvaro Barrera; Sharad Yadav

2005-10-01T23:59:59.000Z

470

History and Organization of the Port Hacking Estuary Project  

Science Journals Connector (OSTI)

The history of research into Port Hacking before the Port Hacking Estuary Project of 1973–1978 is summarized....

Robert R. Parker; David J. Rochford…

1983-01-01T23:59:59.000Z

471

MSc/Dip in the History and Theory of Psychology  

E-Print Network (OSTI)

MSc/Dip in the History and Theory of Psychology PROGRAMME HANDBOOK 2011-2012 Psychology The School of Philosophy, Psychology and Language Sciences, University of Edinburgh #12;MSc in the History and Theory of Psychology 2011/12 2 MSc/Dip in the History and Theory of Psychology 2011-2012 This booklet is a guide

Edinburgh, University of

472

Efficient IRM enforcement of history-based access control policies  

Science Journals Connector (OSTI)

Inlined Reference Monitor (IRM) is an established enforcement mechanism for history-based access control policies. IRM enforcement injects monitoring code into the binary of an untrusted program in order to track its execution history. The injected code ... Keywords: distributed optimization protocol, history-based access control policies, inlined reference monitors, language-based security, security automata

Fei Yan; Philip W. L. Fong

2009-03-01T23:59:59.000Z

473

Analysing the Entire Wikipedia History with Database Supported Haskell  

E-Print Network (OSTI)

Analysing the Entire Wikipedia History with Database Supported Haskell George Giorgidze1 , Torsten the entire Wikipedia history. DSH is a novel high-level database query facility allowing for the for on our experience of using Database Supported Haskell (DSH) [4] for analysing the entire history

Grust, Torsten

474

Triggers on Database Histories A. Prasad Sistla Ouri Wolfson  

E-Print Network (OSTI)

Triggers on Database Histories A. Prasad Sistla Ouri Wolfson Department of Electrical Engineering of the database state over time (i.e. the database history). For example, in securities trading, the system may to the database history. The following temporal trigger is one such example--- the value of attribute A increases

Wolfson, Ouri E.

475

Bridging Relational Database History and the Web: the XML Approach  

E-Print Network (OSTI)

Bridging Relational Database History and the Web: the XML Approach Fusheng Wang Integrated Data and queries, and make it easy to pub- lish database history to the Web. In this paper, we focus on the problem of preserving, publishing, and querying ef- ficiently the history of a relational database. Past research

Zaniolo, Carlo

476

Privacy Impact Assessment National Museum of Natural History  

E-Print Network (OSTI)

into the Raiser's Edge fundraising database. Raiser's Edge is used by National Museum of Natural History staff1 Privacy Impact Assessment National Museum of Natural History Office of External Affairs Online provides National Museum of Natural History supporters with the ability to make a credit card donation

Mathis, Wayne N.

477

Chronicle: Capture, Exploration, and Playback of Document Workflow Histories  

E-Print Network (OSTI)

Chronicle: Capture, Exploration, and Playback of Document Workflow Histories Tovi Grossman, Justin ABSTRACT We describe Chronicle, a new system that allows users to explore document workflow histories. Chronicle captures the entire video history of a graphical document, and provides links between the content

Toronto, University of

478

An Application-Independent System for Visualizing User Operation History  

E-Print Network (OSTI)

An Application-Independent System for Visualizing User Operation History Toshio Nakamura Department conventional interactive systems provide the user operation history only as a list of text commands. The text have been proposed. For example, the Chimera system [17] visualizes an operation history as a sequence

Igarashi, Takeo

479

View Discovery in OLAP Databases through Statistical Combinatorial Optimization  

SciTech Connect

The capability of OLAP database software systems to handle data complexity comes at a high price for analysts, presenting them a combinatorially vast space of views of a relational database. We respond to the need to deploy technologies sufficient to allow users to guide themselves to areas of local structure by casting the space of ``views'' of an OLAP database as a combinatorial object of all projections and subsets, and ``view discovery'' as an search process over that lattice. We equip the view lattice with statistical information theoretical measures sufficient to support a combinatorial optimization process. We outline ``hop-chaining'' as a particular view discovery algorithm over this object, wherein users are guided across a permutation of the dimensions by searching for successive two-dimensional views, pushing seen dimensions into an increasingly large background filter in a ``spiraling'' search process. We illustrate this work in the context of data cubes recording summary statistics for radiation portal monitors at US ports.

Joslyn, Cliff A.; Burke, Edward J.; Critchlow, Terence J.

2009-05-01T23:59:59.000Z

480

The Manhattan Project: An Interactive History  

Office of Scientific and Technical Information (OSTI)

Leslie Groves and J. Robert Oppenheimer In a national survey at the turn of the millennium, both journalists and the public ranked the dropping of the atomic bomb and the end of the Second World War as the top news stories of the twentieth-century. The advent of nuclear weapons, made possible by the Manhattan Project, not only helped bring an end to the Second World War-it ushered in the atomic age and determined how the next war, the Cold War, would be fought. The Manhattan Project: An Interactive History is intended to provide a comprehensive overview of the Manhattan Project. Five main topical areas-Events, People, Places, Processes, and Science-are further divided into sub-sections, each with an introductory page and as many as a dozen or more sub-pages. The site is interactive in the sense that it is designed with the flexibility to meet the needs of a variety of users. Those seeking a brief overview of the Manhattan Project, for example, should start with the introductory pages for the eight sub-sections of the Events Section. Users wanting a more in-depth chronological history should read, in order, the fifty-six Events sub-pages. Numerous internal links within the content of the pages allows the reader to easily move from page to page, wherever his or her interests lead. There are thus multiple ways for the user to approach the site. In addition, the Resources Section provides access to a variety of resource materials, including photos, documents, maps, and published histories.

Note: This page contains sample records for the topic "view history rotary" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Review: Air Pollution and Global Warming: History, Science, and Solutions, 2nd ed.  

E-Print Network (OSTI)

Air Pollution and Global Warming: History, Science, andZ. Air Pollution and Global Warming: History, Science, andAir Pollution and Global Warming: History, Science, and

Laberge, Yves

2013-01-01T23:59:59.000Z

482

The Modern History of Energy Conservation: An Overview for Information Professionals  

E-Print Network (OSTI)

The Modern History Of Energy Conservation: An Overview forCONSERVATION? THE EARLY HISTORY OF ENERGY CONSERVATION THErelated terms. THE EARLY HISTORY OF ENERGY CONSERVATION The

Wulfinghoff, Donald R.

2000-01-01T23:59:59.000Z

483

E-Print Network 3.0 - american resource history Sample Search...  

NLE Websites -- All DOE Office Websites (Extended Search)

British History, Early Modern and Modern European History... , Rebellion and Ryot; Kings and Kindreds; The American Civil War: History and Memory; Dress and Society... ,...

484

Oil history, potential converge in Azerbaijan  

SciTech Connect

Azerbaijan, the oldest known oil producing region in the world, still holds great potential for new discoveries and increased production. A multi-billion dollar production sharing agreement was recently signed with a consortium of primarily western oil companies to develop three oil fields in the Caspian Sea. Soon, Azerbaijan will offer new exploration acreage both offshore and onshore. This paper describes the history of oil production in Azerbaijan, offshore developments, tectonics, stratigraphy, petroleum traps, mud volcanoes, and short summaries of several oil producing areas. Current production is about 9 million tons/yr of oil and 7 billion cu m/yr of natural gas.

Narimanov, A.A. [State Oil Co. of Azerbaijan, Baku (Azerbaijan); Palaz, I. [Amoco Production Co., Houston, TX (United States)

1995-05-22T23:59:59.000Z

485

The history and development of caravels  

E-Print Network (OSTI)

during the 15th century. They expanded their empire south, reaching the north coast of Africa, set up trading ports all along Africa?s west coast, and eventually reached the Indian Ocean and the Indian subcontinent, establishing a complex 9 trade... take this opportunity to sincerely thank all of the people that have shared their time, energy, experience, and advice to help me in my pursuit of knowledge concerning the history of Iberian seafaring. I would like to thank my committee chair, Dr...

Schwarz, George Robert

2009-05-15T23:59:59.000Z

486

Chapter 8 - The history of nuclear energy  

Science Journals Connector (OSTI)

Abstract This chapter reviews the history related to nuclear energy beginning with scientific investigations in the late 1800s that led to the discovery of subatomic particles and both atomic and nuclear structure. Those research efforts spawned the discovery of fission. The Manhattan Project to develop an atomic bomb then accelerated the knowledge base of nuclear phenomena. After World War II, the Atomic Energy Commission was established and later the International Atomic Energy Agency. Research and development efforts led to the deployment of the first nuclear power plants. This chapter ends by addressing the controversies surrounding nuclear energy in the late twentieth century.

Raymond L. Murray; Keith E. Holbert

2015-01-01T23:59:59.000Z

487

January 2013 Most Viewed Documents for Mathematics And Computing...  

Office of Scientific and Technical Information (OSTI)

January 2013 Most Viewed Documents for Mathematics And Computing Cybersecurity through Real-Time Distributed Control Systems Kisner, Roger A ORNL; Manges, Wayne W ORNL;...

488

March 2014 Most Viewed Documents for National Defense | OSTI...  

Office of Scientific and Technical Information (OSTI)

2014 Most Viewed Documents for National Defense Science Subject Feed The Effects of Nuclear Weapons Glasstone, Samuel (1964) 72 SMART BRIDGE: A tool for estimating the military...

489

July 2013 Most Viewed Documents for Renewable Energy Sources...  

Office of Scientific and Technical Information (OSTI)

2013 Most Viewed Documents for Renewable Energy Sources Science Subject Feed Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 484 > Environmental Impacts of...

490

April 2013 Most Viewed Documents for Renewable Energy Sources...  

Office of Scientific and Technical Information (OSTI)

2013 Most Viewed Documents for Renewable Energy Sources Science Subject Feed Chapter 11. Heat Exchangers Rafferty, Kevin D.; Culver, Gene (1998) 1252 > Seventh Edition Fuel Cell...

491

The Better Buildings Neighborhood View - December 2013 | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- July 2013 Focus Series: Philadelphia Energyworks: In the City of Brotherly Love, Sharing Know-How Leads to Sustainability The Better Buildings Neighborhood View - October 2012...

492

September 2013 Most Viewed Documents for Fission And Nuclear...  

Office of Scientific and Technical Information (OSTI)

September 2013 Most Viewed Documents for Fission And Nuclear Technologies Science Subject Feed Estimation of gas leak rates through very small orifices and channels. From sealed...

493

January 2013 Most Viewed Documents for Fission And Nuclear Technologie...  

Office of Scientific and Technical Information (OSTI)

January 2013 Most Viewed Documents for Fission And Nuclear Technologies Laboratory studies of shearleach processing of zircaloy clad metallic uranium reactor fuel Swanson, J.L.;...

494

January 2013 Most Viewed Documents for Chemistry | OSTI, US Dept...  

Office of Scientific and Technical Information (OSTI)

January 2013 Most Viewed Documents for Chemistry Dialkylenecarbonate-Bridged Polysilsesquioxanes. Hybrid Organic-Inorganic Sol-Gels with a Thermally Labile Bridging Group Assink,...

495

A HYPERSPECTRAL VIEW OF THE CRAB NEBULA  

SciTech Connect

We have obtained spatially resolved spectra of the Crab nebula in the spectral ranges 450-520 nm and 650-680 nm, encompassing the H{beta}, [O III] {lambda}4959, {lambda}5007, H{alpha}, [N II] {lambda}6548, {lambda}6584, and [S II] {lambda}6717, {lambda}6731 emission lines, with the imaging Fourier transform spectrometer SpIOMM at the Observatoire du Mont-Megantic's 1.6 m telescope. We first compare our data with published observations obtained either from a Fabry-Perot interferometer or from a long-slit spectrograph. Using a spectral deconvolution technique similar to the one developed by Cadez et al., we identify and resolve multiple emission lines separated by large Doppler shifts and contained within the rapidly expanding filamentary structure of the Crab. This allows us to measure important line ratios, such as [N II]/H{alpha}, [S II]/H{alpha}, and [S II] {lambda}6717 /[S II] {lambda}6731 of individual filaments, providing a new insight on the SE-NW asymmetry in the Crab. From our analysis of the spatial distribution of the electronic density and of the respective shocked versus photoionized gas components, we deduce that the skin-less NW region must have evolved faster than the rest of the nebula. Assuming a very simple expansion model for the ejecta material, our data provide us with a complete tridimensional view of the Crab.

Charlebois, M.; Drissen, L.; Bernier, A.-P. [Departement de Physique, de Genie Physique et d'Optique, Universite Laval, Quebec, Quebec G1V 0A6 (Canada); Grandmont, F. [ABB Bomem Inc., 585 boulevard Charest est, Suite 300, Quebec, Quebec G1K 9H4 (Canada); Binette, L., E-mail: maxime.charlebois.1@ulaval.c, E-mail: ldrissen@phy.ulaval.c, E-mail: anne-pier.bernier.1@ulaval.c [Instituto de AstronomIa, UNAM, Ap.70-264, 04510 Mexico, DF (Mexico)

2010-05-15T23:59:59.000Z

496

Performance viewing and editing in ASSESS Outsider  

SciTech Connect

The Analytic System and Software for Evaluation of Safeguards and Security (ASSESS) Facility module records site information in the path elements and areas of an Adversary Sequence Diagram. The ASSESS Outsider evaluation module takes this information and first calculates performance values describing how much detection and delay is assigned at each path element and then uses the performance values to determine most-vulnerable paths. This paper discusses new Outsider capabilities that allow the user to view how elements are being defeated and to modify some of these values in Outsider. Outsider now displays how different path element segments are defeated and contrasts the probability of detection for alternate methods of defeating a door (e.g., the lock or the door face itself). The user can also override element segment delays and detection probabilities directly during analysis in Outsider. These capabilities allow users to compare element performance and to verify correct path element performance for all elements, not just those on the most-vulnerable path as is the case currently. Improvements or reductions in protection can be easily checked without creating a set of new facility files to accomplish it.

Snell, M.K. [Sandia National Labs., Albuquerque, NM (US); Key, B.; Bingham, B. [Science and Engineering Associates, Inc., Albuquerque, NM (US)

1993-07-01T23:59:59.000Z

497

The INTEGRAL View of the Galactic Nucleus  

E-Print Network (OSTI)

We present the preliminary results of the observational campaign performed in 2003 to study the Galactic Nucleus with INTEGRAL. The mosaicked images obtained with the IBIS/ISGRI coded aperture instrument in the energy range above 20 keV, give a yet unseen view of the high-energy sources of this region in hard X and gamma-rays, with an angular resolution of 12'. We report on the discovery of a source, IGR J17456-2901, compatible with the instrument's point spread function and coincident with the Galactic Nucleus Sgr A* to within 0.9'. The source is visible up to 60-80 keV with a 20-100 keV luminosity at 8 kpc of 3 x 10E35 erg/s. Although we cannot unequivocally associate the new INTEGRAL source to the Galactic Nucleus, this is the first report of significant hard X-ray emission from within the inner 10' of the Galaxy and a contribution from the galactic center supermassive black hole itself cannot be excluded. Here we discuss the results obtained and the perspectives for future observations of the Galactic Nuc...

Goldwurm, A; Goldoni, P; Paul, J; Terrier, R; Falanga, M; Ubertini, P; Bazzano, A; Santo, M D; Winkler, C; Parmar, A N; Kuulkers, E; Ebisawa, K; Roques, J P; Skinner, G K; Lund, N; Melia, F; Yusef-Zadeh, F

2004-01-01T23:59:59.000Z

498

The Nature of Power Synthesizing the History of Technology and Environmental History  

E-Print Network (OSTI)

of the Minneapolis mill. First, let us walk through the ruins to trace the path of energy. Nuclear fusion in the sun sent energy to earth in the form of light. Wheat plants captured solar energy and transformed it into chemical energy by storing it in bonds between... action even against the resistance of others who are participating in the action.”11 In his view, power is socially determined, related to but not necessarily dependent on material inputs, and defined in relation to the ability of others.12 This view...

Russell, Edmund P.; Allison, James; Finger, Thomas; Brown, John K.; Balogh, Brain; Carlson, W. Bernard

2011-04-01T23:59:59.000Z

499

Building Technologies Office: History and Impacts  

NLE Websites -- All DOE Office Websites (Extended Search)

History and Impacts History and Impacts Appliance and equipment efficiency standards have served as one of the nation's most effective policies for improving energy efficiency. The first standards were enacted at the state level in California in 1974. At the national level, the Energy Policy and Conservation Act (EPCA) was enacted in 1975, and established a federal program consisting of test procedures, labeling, and energy targets for consumer products. EPCA was amended in 1979 and directed the Department of Energy (DOE) to establish energy conservation standards for consumer products. The National Appliance Energy Conservation Act of 1987 established minimum efficiency standards for many common household appliances. Congress set initial federal energy efficiency standards and established schedules for DOE to review and update these standards. The Energy Policy Act of 1992 (EPAct) added standards for some fluorescent and incandescent reflector lamps, plumbing products, electric motors, commercial water heaters, and heating, ventilation, and air conditioning (HVAC) systems. EPAct also allowed for the future development of standards for many other products.

500

History of American acoustics—Introductory comments  

Science Journals Connector (OSTI)

The history of acoustics has been illuminated by the efforts in recent years of R. Bruce Lindsay and so this Bicentennial Session is being held in his honor. In addition certain numerological factors spurred our efforts in this Bicentennial Year 1976. It was just one hundred years ago that A. G. Bell's invention—the first practical telephone—was exhibited at the 1876 Centennial Exposition in Philadelphia. A year later in 1877 the first edition of Rayleigh's Theory of Sound appeared. The conjunction of these two events eventually had a powerful influence on the development of acoustics. The invited speakers will in the papers which follow endeavor to describe all of the significant advances made by Americans to technical acoustics. Apparently it all began with Joseph Henry's efforts to solve a problem in auditorium acoustics. At the brink of World War II acoustics was invaded by a host of scientists and engineers. During the period 1941–45 and in the post war years frontiers were breached in almost every direction at such a rate that description of the advances made cannot be done here. And so most of our speakers will bring their histories up only to about the year 1940.

Richard K. Cook

1976-01-01T23:59:59.000Z