Powered by Deep Web Technologies
Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Pocket Milling with Tool Engagement Detection  

E-Print Network (OSTI)

This paper presents an algorithm for generating a tool path for cutting a pocket with islands, which includes detecting when the tool is certain to be making a minimal engagement cut. Minimal engagement is defined as the amount of engagement present in peripheral milling of a flat side face of a workpiece in a straight line with constant stepover. Feed rates and spindle speeds are reset by the algorithm when machining conditions change from a minimal engagement cut to any other type of cut or vice versa.

Thomas Kramer April; Thomas R. Kramer

1992-01-01T23:59:59.000Z

2

On The Face Milling Burr Formation Mechanisms and Minimization Strategies at High Tool Engagement  

E-Print Network (OSTI)

on Burr Formation in Face Milling with an Extreme PositiveBurr Formation in Face Milling”, Bulletin Japan Society ofRoughness in High Speed Face Milling”, 2001-2002 LMA Annual

Avila, Miguel C; Dornfeld, David A

2004-01-01T23:59:59.000Z

3

Experimental and analytical investigation of the seismic performance of low-rise masonry veneer buildings  

E-Print Network (OSTI)

Masonry Veneer”, Proceedings, ASCE/SEI Structures Congress,Masonry Veneer”, Proceedings, ASCE/SEI Structures Congress,Masonry Veneer”, Proceedings, ASCE/SEI Structures Congress,

Okail, Hussein

2010-01-01T23:59:59.000Z

4

Design of a Veneer Cooler/Sorter for the Plywood Industry.  

Science Conference Proceedings (OSTI)

Radio Frequency (rf) dryers offer the opportunity for veneer manufacturers to process more high grade veneer and to do it more efficiently. A veneer cooler has been designed to enhance the use of rf technology in this industry by eliminating certain problems associated with cooling and inventory delays. The objective of this study was to determine the economic and technical feasibility of a veneer cooler/sorter for use with rf dryers in the plywood manufacturing industry. The second part of this report provides an accurate cost estimate for building a forced air cooler system to be used in conjunction with an rf veneer redryer. 6 refs., 4 tabs.

United States. Bonneville Power Administration.

1989-07-01T23:59:59.000Z

5

Geometric Approaches for Reducing Burr Formation in Planar Milling by Avoiding Tool Exits  

E-Print Network (OSTI)

1999). “A summary of micro-milling studies. ” 1st Int’lT.R. (1992). “Pocket milling with tool engagement detec-Burr minimization in face milling: a geometric approach. ”

Chu, Chih-Hsing; Dornfeld, David

2008-01-01T23:59:59.000Z

6

Evan Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784...

7

Corn Milling  

Science Conference Proceedings (OSTI)

... facilities include processing and storage tanks, screening and sizing equipment, grind mills, high pressure steam boilers, centrifuges, rotary ...

8

Cassie Mills  

Energy.gov (U.S. Department of Energy (DOE))

Cassie Mills is a communications associate in the Advanced Manufacturing Office in the Office of Energy Efficiency and Renewable Energy.

9

Evan Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Evan Mills Evan Mills Evan Mills Residential Building Systems Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R2000 Berkeley CA 94720 Office Location: 90-2058 (510) 486-6784 EMills@lbl.gov Evan Mills is a Staff Scientist in the Building Technology and Urban Systems Department, and has worked in the energy efficiency field since 1982. His core commercial-buildings expertise is in energy benchmarking, commissioning, high-tech buildings, risk management, and the efficiency business case. He is a frequent speaker to academic and industry audiences on buildings energy efficiency, author of over 200 publications, and member of the Intergovernmental Panel on Climate Change, which shared the 2007 Nobel Peace Prize. He is recipient of an R&D 100 award for commercializing

10

Andrew Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

Andrew D. Mills Andrew D. Mills Andrew Mills Electricity Markets and Policy Group Lawrence Berkeley National Laboratory 1 Cyclotron Road MS 90R4000 Berkeley CA 94720 Office Location: 90-4126J (510) 486-4059 ADMills@lbl.gov Andrew D. Mills is a Principal Research Associate in the Electricity Markets and Policy Group at Lawrence Berkeley National Laboratory. Andrew conducts research and provides policy analysis on renewables and transmission, including power system operations and valuation of wind and solar. Andrew's has published his research in Energy Policy and was a contributing author to the IPCC Special Report on Renewable Energy. Previously, Andrew worked with All Cell Technologies, a battery technologystart-up company. Andrew has an M.S. in Energy and Resources from UC Berkeley and a B.S. in

11

Comminution process to produce engineered wood particles of uniform size and shape with disrupted grain structure from veneer  

DOE Patents (OSTI)

Comminution process of wood veneer to produce wood particles, by feeding wood veneer in a direction of travel substantially normal to grain through a counter rotating pair of intermeshing arrays of cutting discs arrayed axially perpendicular to the direction of veneer travel, wherein the cutting discs have a uniform thickness (Td), to produce wood particles characterized by a length dimension (L) substantially equal to the Td and aligned substantially parallel to grain, a width dimension (W) normal to L and aligned cross grain, and a height dimension (H) substantially equal to the veneer thickness (Tv) and aligned normal to W and L, wherein the W.times.H dimensions define a pair of substantially parallel end surfaces with end checking between crosscut fibers.

Dooley, James H; Lanning, David N

2013-07-30T23:59:59.000Z

12

Cargill Corn Milling North America  

Science Conference Proceedings (OSTI)

... Manufacturing. Cargill Corn Milling North America. Cargill employees (Photo courtesy of Cargill Corn Milling North America). ...

2010-11-23T23:59:59.000Z

13

Engaged. Adaptive. Efficient. Sustainable  

E-Print Network (OSTI)

· Waste · Built Environment · Transportation · Energy · Community Engagement and Equality Each working.................................................................................................................................................................21 Energy ...............................................................................................................................................................37 Waste

Peterson, Blake R.

14

Milling Techniques - TMS  

Science Conference Proceedings (OSTI)

February 4-8 · 1996 TMS ANNUAL MEETING · Anaheim, California. SYNTHESIS AND PROCESSING OF NANOCRYSTALLINE POWDER III: Milling Techniques ...

15

Building Technologies Office: Engaging Stakeholders  

NLE Websites -- All DOE Office Websites (Extended Search)

on Twitter Bookmark Building Technologies Office: Engaging Stakeholders on Google Bookmark Building Technologies Office: Engaging Stakeholders on Delicious Rank...

16

Internet Support for Engaged Learning  

NLE Websites -- All DOE Office Websites (Extended Search)

Internet Support for Student Engagement in Science Skills and strategies students need to be successful today and in the future are effectively taught through engagement in...

17

"Invisible" Archaeological Deposits at Small Milling Sites  

E-Print Network (OSTI)

Deposits at Small Milling Sites ROBERT E. PARR and MARK Q.architechire, bedrock milling features, soil colorlithic scatters or bedrock milling stations), it appears

Parr, Robert E.; Sutton, Mark Q.

1991-01-01T23:59:59.000Z

18

Yang-Mills redux  

E-Print Network (OSTI)

It is noted that a given pairing of the phase factor and gauge transformation to retain gauge symmetry is not unique. In their seminal paper, when Yang and Mills (YM) discuss the phase factor- gauge transformation relationship, they cite Pauli’s review paper. It is interesting that although Pauli in that paper presents the electromagnetic field strength in terms of a commutator, for whatever reason YM did not extrapolate the commutator’s use to obtain the Yang-Mills field strength – they obtained it by trial and error. Presented is a derivation of this field strength using the commutator approach detailing how certain terms cancel each other. Finally, the Yang-Mills field transformation is derived in a slightly different way than is traditionally done. 1

Samuel L. Marateck

2006-01-01T23:59:59.000Z

19

The Cooperative Engagement Capability  

E-Print Network (OSTI)

picture as well as the ability to engage targets that may not be seen locally, a new level of capability may be attained. This ability is precisely what the Cooperative Engagement Capability (CEC) provides for a network of combatants. Recent tests demonstrated that from older, short-range systems such as NATO Sea Sparrow through the latest Aegis baselines, CEC can provide greater defensive capabilities and even provide new types of capabilities to a battle force. However, CEC does not obviate the need for advances in sensors, fire control, and interceptors. Rather, CEC allows the INTRODUCTION Operation in the littoral theater is a principal Navy 1990s scenario with complexities never considered in the Cold War era. For theater air defense, the complexities include the natural environment and its effects on sensor range. For example, desensitization by clutter from propagation ducting and rough terrain, as well as blockage by coastal mountains and clif

Apl

1995-01-01T23:59:59.000Z

20

THE ENGAGED SCHOLARS PROGRAM Application  

E-Print Network (OSTI)

description of the project on which you will work while participating in the Engaged Scholars Program. Please THE ENGAGED SCHOLARS PROGRAM Application Full Name any works on service-learning or community-based research? Please explain. Millersville University

Hardy, Christopher R.

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

RAFFINATE CHARACTERIZATION PION RIDGE MILL  

E-Print Network (OSTI)

were: I. The Uranium Fuel Cycle Facilities 2. Underground Uranium Mines 3. Inactive Uranium Mill Tailings 4. Licensed Uranium Mill Tailings 5. High-Level Waste Disposal Facilities 6. Department of Energy-2 ...........................................1.2.2 Uranium Mills 1-2 ...............................1.2.3 Uranium Conversion Facilities 1

22

Evaluation of End Mill Coatings  

SciTech Connect

Milling tests were run on families of High Speed Steel (HSS) end mills to determine their lives while machining 304 Stainless Steel. The end mills tested were made from M7, M42 and T15-CPM High Speed Steels. The end mills were also evaluated with no coatings as well as with Titanium Nitride (TiN) and Titanium Carbo-Nitride (TiCN) coatings to determine which combination of HSS and coating provided the highest increase in end mill life while increasing the cost of the tool the least. We found end mill made from M42 gave us the largest increase in tool life with the least increase in cost. The results of this study will be used by Cutting Tool Engineering in determining which end mill descriptions will be dropped from our tool catalog.

L. J. Lazarus; R. L. Hester,

2005-08-01T23:59:59.000Z

23

Approximation Algorithm for Multiple-Tool Milling  

E-Print Network (OSTI)

Milling is the mechanical process of removing material from a piece of stock through the use of a rapidly spinning circular milling tool in order to form some desired geometric shape. An important problem in computer-aided design and manufacturing is the automated generation of efficient milling plans for computerized numerically controlled (CNC) milling machines. Among the most common milling problems is simple 2-dimensional pocket milling: cut a given 2-dimensional region down to some constant depth using a given set of milling tools. Most of the research in this area has focused on generating such milling plans assuming that the machine has a tool of a single size. Since modern CNC milling machines typically have access to a number of milling tools of various sizes and the ability to change tools automatically, this raises the important optimization problem of generating efficient milling plans that take advantage of this capability to reduce the total milling time. We consider the ...

Sunil Arya; Siu-Wing Cheng; David M. Mount

1999-01-01T23:59:59.000Z

24

Colony Mills Limited | Open Energy Information  

Open Energy Info (EERE)

Mills Limited Jump to: navigation, search Name Colony Mills Limited Place Lahore, Pakistan Sector Solar Product Yarn manufacturer, plans to set up solar thermal plant....

25

Stakeholder Engagement and Outreach: News  

Wind Powering America (EERE)

News News This page lists all of the news referenced on the Stakeholder Engagement and Outreach initiative's website. Also follow news from the Stakeholder Engagement and Outreach initiative by subscribing to its newsletter or through an RSS Feed Stakeholder Engagement and Outreach initiative News RSS Feed . Learn about RSS Feeds. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Subject Category All Agricultural Public Power Schools Small Wind Economic Development Policy Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 464 records found. Page 1 of 93, Sorted by descending date Filtered by: News 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

26

Alloy by Double Mechanical Milling  

Science Conference Proceedings (OSTI)

The results show that the morphology of double mechanical milling powder is regular and the TiAl phase and Ti3Al phase were observed in the powders.

27

VOC Control in Kraft Mills  

Science Conference Proceedings (OSTI)

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA).

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-09-26T23:59:59.000Z

28

Yang-Mills algebra.  

E-Print Network (OSTI)

Some unexpected properties of the cubic algebra generated by the covariant derivatives of a generic Yang-Mills connection over the (s+1)-dimensional pseudo Euclidean space are pointed out. This algebra is Gorenstein and Koszul of global dimension 3 but except for s=1 (i.e. in the 2-dimensional case) where it is the universal enveloping algebra of the Heisenberg Lie algebra and is a cubic Artin-Schelter regular algebra, it fails to be regular in that it has exponential growth. We give an explicit formula for the Poincare series of this algebra A and for the dimension in degree n of the graded Lie algebra of which A is the universal enveloping algebra. In the 4-dimensional (i.e. s=3) Euclidean case, a quotient of this algebra is the quadratic algebra generated by the covariant derivatives of a generic (anti) self-dual connection. This latter algebra is Koszul of global dimension 2 but is not Gorenstein and has exponential growth. It is the universal enveloping algebra of the graded Lie-algebra which is the semi-direct product of the free Lie algebra with three generators of degree one by a derivation of degree one.

Alain Connes; Michel Dubois-Violette.

29

Efficient Tool Paths and Part Orientation for Face Milling  

E-Print Network (OSTI)

Avoiding Tool Exit in Planar Milling by Adjusting Width oftime. The most common face milling tool paths employed areand Part Orientation for Face Milling A. Rangarajan 1 , D.

Rangarajan, Arvind; Dornfeld, David

2004-01-01T23:59:59.000Z

30

Milling Stone Cultures in Northern California: Berryessa I  

E-Print Network (OSTI)

Weight 313 g. Edge angle MILLING STONE CULTURES IN NORTHERNSite and the Early Milling Stone Cultures of SouthernMilling Stone Cultures in Northern California: Berryessa I

True, D. L; Baumhoff, M. A; Hellen, J. E

1979-01-01T23:59:59.000Z

31

Feasible Offset Region Based Tool Path Planning for Face Milling  

E-Print Network (OSTI)

Path Planning for Face Milling, Masters Report, UniversityPath Planning for Face Milling Prabhu Ramachandran Sponsoredburr formation while face milling powertrain components in

Ramachandran, Prabhu; Dornfeld, David A

2003-01-01T23:59:59.000Z

32

Review of Geometric Solutions for Milling Burr Prediction and Minimization  

E-Print Network (OSTI)

height and thickness in face milling operation. Trans. ASME,Burr prediction system for face milling operation. Mastersminimi- zation in face milling: a geometric approach. Trans,

Tripathi, Shantanu; Dornfeld, David

2006-01-01T23:59:59.000Z

33

Comments of Mille Lacs Energy Cooperative | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mille Lacs Energy Cooperative Comments of Mille Lacs Energy Cooperative Comments of Mille Lacs Energy Cooperative on Implementing the National Broadband Plan by Studying the...

34

Stakeholder Engagement and Outreach: Contacts  

Wind Powering America (EERE)

Stakeholder Engagement and Outreach Staff Contacts Stakeholder Engagement and Outreach Staff Contacts This page introduces the Stakeholder Engagement and Outreach team. If you have questions, please contact the Webmaster. Photo of Patrick Gilman Patrick Gilman Wind Energy Deployment Manager, U.S. Department of Energy 720-356-1420 Photo of Ben Chicoski Ben Chicoski Senior Analyst, Energetics Incorporated 202-406-4149 Photo of Debbie Schultheis Debbie Schultheis Technical Project Officer, U.S. Department of Energy 720-356-1811 Photo of Mark Bolinger Mark Bolinger Research Scientist, Electricity Markets and Policy Group, Lawrence Berkeley National Laboratory 603-795-4937 Photo of Tessa Dardani Tessa Dardani Administrative Analyst, National Renewable Energy Laboratory 303-384-6962 Photo of Ben Hoen Ben Hoen Principal Research Associate, Electricity Markets and Policy Group,

35

In-Process Separation of Mill Scale From Oil at Steel Hot Rolling Mills  

Science Conference Proceedings (OSTI)

It is of vital importance to find cost-effective technologies of reducing oil concentration in mill scale in order to recycle the mill scale without causing detrimental ...

36

Gas fluidized-bed stirred media mill  

DOE Patents (OSTI)

A gas fluidized-bed stirred media mill is provided for comminuting solid ticles. The mill includes a housing enclosing a porous fluidizing gas diffuser plate, a baffled rotor and stator, a hollow drive shaft with lateral vents, and baffled gas exhaust exit ports. In operation, fluidizing gas is forced through the mill, fluidizing the raw material and milling media. The rotating rotor, stator and milling media comminute the raw material to be ground. Small entrained particles may be carried from the mill by the gas through the exit ports when the particles reach a very fine size.

Sadler, III, Leon Y. (Tuscaloosa, AL)

1997-01-01T23:59:59.000Z

37

MILLING OPERATIONS Milling is the process of machining flat, curved, or Milling machines are basically classified as vertical or  

E-Print Network (OSTI)

-speed steel, stellite, and cemented carbide cutters reamer shank. In this case, one or two side milling have

Gellman, Andrew J.

38

Ivaco Rolling Mills LP, Chemistry Laboratory  

Science Conference Proceedings (OSTI)

Ivaco Rolling Mills LP, Chemistry Laboratory. NVLAP Lab Code: 200143-0. Address and Contact Information: Highway 17 ...

2013-09-06T23:59:59.000Z

39

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS  

E-Print Network (OSTI)

URANIUM MILL TAILINGS RADON FLUX CALCULATIONS PIÃ?ON RIDGE PROJECT MONTROSE COUNTY, COLORADO (EFRC) proposes to license, construct, and operate a conventional acid leach uranium and vanadium mill storage pad, and access roads. The mill is designed to process ore containing uranium and vanadium

40

Handbook of Engaged Learning Projects (HELP)  

NLE Websites -- All DOE Office Websites (Extended Search)

PROJECT DESIGNERS 1996 Marie Bartolotta, Mill Street Elementary School, Naperville, IL; Lawrence Cwik, Madison Junior High School, Naperville, IL; William Fraccaro, Johnson School,...

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

International Fuel Services and Commercial Engagement | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Fuel Services and Commercial Engagement Nuclear Reactor Technologies Fuel Cycle Technologies International Nuclear Energy Policy and Cooperation Bilateral...

42

Science for all: is public engagement engaging the public? 34 April 2006  

E-Print Network (OSTI)

Science for all: is public engagement engaging the public? 3­4 April 2006 Manchester Conference Centre Conference Report ENGAGING SCIENCE CONFERENCE #12;2 INTRODUCTION Public engagement with science the people involved to meet and consider what they are doing. The Wellcome Trust Conference, `Science for all

Rambaut, Andrew

43

Effect of cyclone assisted milling on legume flour characteristics and functionality in selected food products.  

E-Print Network (OSTI)

??Legumes (cowpea and soybean) were milled using a cyclone-assisted attrition mill to produce fine legume flour. Milling variations consisted of alterations in mill design and… (more)

Jarrard, Mark, Jr.

2006-01-01T23:59:59.000Z

44

Stakeholder Engagement and Outreach: Publications  

Wind Powering America (EERE)

Publications Publications This page lists all of the publications referenced on the Stakeholder Engagement and Outreach initiative's website. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Subject Category All Agricultural Public Power Schools Small Wind Economic Development Policy Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 449 records found. Page 1 of 90, Sorted by descending date Filtered by: Publication 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 Next Page >>

45

Energy Savings by Veneering  

E-Print Network (OSTI)

With the Oil Crisis of 1972-1973, the attitude by Industry on fuel usage and conservation began an evolutionary change in attitudes. This change in attitudes was brought about by three strong motivators for conservation: rising prices, availability of fuel, and government voluntary energy improvement program for the 10 largest fuel consuming industries by 1980. While each region of the United States has its own particular set of inflationary fuel costs, the experience at our Babcock & Wilcox plant in Augusta, Georgia is probably a very typical example of the cost rises experienced by Industry since the 1972-1973 period. 1. Electric Power Increase: 190% per KWH 2. Natural Gas Increase: 320% per Therm 3. No.2 Oil Increase: 271% per Gallon 4. No.4 Oil Increase: 339% per Gallon 5. Propane Increase: 250% per Gallon Price increases of 50% to over 100% are conceivable in the next five years, plus the availability of fuels may also be a matter of serious concern.

Cook, T. H.

1980-01-01T23:59:59.000Z

46

Online SAG Mill Pluse Measurement and Optimization  

SciTech Connect

The grinding efficiency of semi autogenous milling or ball milling depends on the tumbling motion of the total charge within the mill. Utilization of this tumbling motion for efficient breakage of particles depends on the conditions inside the mill. However, any kind of monitoring device to measure the conditions inside the mill shell during operation is virtually impossible due to the severe environment presented by the tumbling charge. An instrumented grinding ball, which is capable of surviving a few hours and transmitting the impacts it experiences, is proposed here. The spectrum of impacts collected over 100 revolutions of the mills presents the signature of the grinding environment inside mill. This signature could be effectively used to optimize the milling performance by investigating this signature's relation to mill product size, mill throughput, make-up ball size, mill speed, liner profile and ball addition rates. At the same time, it can also be used to design balls and liner systems that can survive longer in the mill. The technological advances made in electronics and communication makes this leap in instrumentation certainly viable. Hence, the instrumented grinding ball offers the ability to qualitatively observe and optimize the milling environment. An instrumented load cell package that can measure the force of impacts inside the grinding chamber of a mill is developed here. The signal from the instrumented load cell package is interpreted in terms of a histogram termed as an impact spectrum which is a plot of the number of impacts at a specific energy level against the energy. It reflects on the average force regime of the mill. The instrumented load cell package was calibrated against the ultra fast load cell which has been unanimously accepted as a standard to measure single breakage events. The load cell package was successfully used to produce impact spectra in an 8.5 inch lab scale mill. The mill speed and the ball size were varied to study their effect on the impact spectra. A good correlation was found between the process variables and the impact spectra. The load cell package was then used in a 16 inch pilot scale mill. The mill speed, ball size, and mill filling were varied here and a consistent trend between these variables and impact spectra was observed. With a better understanding developed from the initial tests, the design of the load cell package was significantly changed to eliminate noise. With the new design, the impact spectra were re-determined in the 16 inch pilot mill varying the process variables - ball size, mill speed, and mill filling. Finally, it is successfully shown that a change in the operating variables of a mill can be seen in the impact spectra and that this concept can be successfully developed to monitor the grinding operation of industrial mills. To adapt it to industrial level it is mandatory to make the load cell package wireless. A design of a wireless circuit that is capable of transferring data at the required speed of 1000 kbps was also developed and tested at Cortez Gold Mines (CGM), Nevada.

Raj Rajamani; Jose Delgadillo; Vishal Duriseti

2007-06-30T23:59:59.000Z

47

Uranium mill monitoring for natural fission reactors  

SciTech Connect

Isotopic monitoring of the product stream from operating uranium mills is proposed for discovering other possible natural fission reactors; aspects of their occurrence and discovery are considered. Uranium mill operating characteristics are formulated in terms of the total uranium capacity, the uranium throughput, and the dilution half-time of the mill. The requirements for detection of milled reactor-zone uranium are expressed in terms of the dilution half-time and the sampling frequency. Detection of different amounts of reactor ore with varying degrees of /sup 235/U depletion is considered.

Apt, K.E.

1977-12-01T23:59:59.000Z

48

Wet Corn Milling Plant EPI | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Wet Corn Milling Plant EPI Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction...

49

The Bowersock Mills and Power Company 1874  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydroelectric Energy The Bowersock Mills and Power Co., Lawrence, KS Hydroelectric Energy Potential for U.S. BMPC Plant At Forefront of Development Curve "In our estimates...

50

A Milling-Implement Quarry at Elephant Mountain, California  

E-Print Network (OSTI)

pp. 191-221 (1995). A Milling-Implement Quarry at Elephantwere shaped into aboriginal milling stones and pestles andin the Mojave River region. The milling-implement quarry at

Schneider, Joan S; Lerch, Michael K; Smith, Gerald A

1995-01-01T23:59:59.000Z

51

Two Milling Stone Inventories from Northern San Diego County, California  

E-Print Network (OSTI)

2, pp. 233-261 (1982). Two Milling Stone Inventories from5. Manos from Rincon 301. MILLING STONE INVENTORIES FROM SANd-e) from Rincon 301. MILLING STONE INVENTORIES FROM SAN

True, D. L; Beemer, Eleanor

1982-01-01T23:59:59.000Z

52

Virtual cutter path display for dental milling machine  

E-Print Network (OSTI)

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

53

Clean Air Act Requirements: Uranium Mill Tailings  

E-Print Network (OSTI)

EPA'S Clean Air Act Requirements: Uranium Mill Tailings Radon Emissions Rulemaking Reid J. Rosnick Presentation to Environmental Protection Agency Uranium Contamination Radiation Protection Division (6608J requirements for operating uranium mill tailings (Subpart W) Status update on Subpart W activities Outreach

54

Tamil Nadu Spinning Mills Association TASMA | Open Energy Information  

Open Energy Info (EERE)

search Name Tamil Nadu Spinning Mills Association (TASMA) Place Dindigul, Tamil Nadu, India Zip 624003 Sector Wind energy Product Association of spinning mill owners; promoting...

55

NanoFab Tool: 4Wave Ion Milling System  

Science Conference Proceedings (OSTI)

... 4Wave Ion Milling System. CORAL Name: Ion Mill. Location: Building 215 (NanoFab Clean Room Bay A106). Description: ...

2010-10-13T23:59:59.000Z

56

Wet Corn Milling Energy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

307 307 ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY Energy Efficiency Improvement and Cost Saving Opportunities for the Corn Wet Milling Industry An ENERGY STAR Guide for Energy and Plant Managers Christina Galitsky, Ernst Worrell and Michael Ruth Environmental Energy Technologies Division Sponsored by the U.S. Environmental Protection Agency July 2003 Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any agency thereof, nor The Regents of the University of California, nor any of their employees, makes any warranty, express or implied, or assumes any legal responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product,

57

Communication & Engagement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Engagement Engagement Communication & Engagement Intergovernmental Programs The Office of Environmental Management supports, by means of grants and cooperative agreements, a number of institutionalized activities and relationships with various national intergovernmental organizations. Read more Environmental Management Advisory Board (EMAB) The mission of the Environmental Management Advisory Board is to provide independent and external advice, information, and recommendations to the Assistant Secretary for Environmental Management (EM) on corporate issues relating to accelerated site clean-advice and risk reduction. Read more Site-Specific Advisory Board (SSAB) At the request of the Office of Environmental Management (EM) Assistant Secretary or the Field Managers, the EM Site-Specific Advisory Board may

58

Rules of Engagment for Exercise Players  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Energy Energy Washington, DC 20585 Rules of Engagement for Exercise Players Rules of engagement (ROE) provide for control of an exercise while allowing maximum free play in a tactical setting and enable evaluators to objectively monitor a participant's performance. Use of engagement simulation systems (ESSs) promotes realistic simulation of real-world response actions, which is vital to performance testing and evaluation. ROE govern the activities of all players (participants, controllers, and evaluators) throughout the exercise period, regardless of the organization, the identified training or evaluation objectives, or the particular scenario. ROE also apply to all personnel who participate in, support, observe, or control exercises. Only the Test

59

EI Summary of SIC 24  

U.S. Energy Information Administration (EIA) Indexed Site

Lumber (24) All (20-39) Food (20) Textiles (22) Apparel (23) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) Lumber (24) All (20-39) Food (20) Textiles (22) Apparel (23) Furniture (25) Paper (26) Printing (27) Chemicals (28) Refineries (29) Rubber (30) Stone, Clay & Glass(32) Primary Metals (33) Fabricated Metals (34) Machinery (35) Electronic Equipment (36) Instruments (38) Miscellaneous Manufacturing (39) This major group includes establishments engaged in cutting timber and pulpwood; merchant sawmills, lath mills, and shingle mills, cooperage stock mills, planing mills and plywood and veneer mills engaged in producing lumber and wood basic materials; and establishments engaged in manufacturing finished articles made entirely or mainly of wood or related materials. If you found this information useful, please try... Energy Consumption Use of Energy

60

Pre-engagement process improvement in IBM PC services  

E-Print Network (OSTI)

The front end of the IBM PC factory integration & deployment process is a pre-engagement process. In this study, the pre-engagement process, was analyzed. The organizational structure in the pre-engagement process and the ...

Zuo, Jie, M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Citizen engagement with information aggregation markets  

Science Conference Proceedings (OSTI)

Participatory governance entails converting citizens from passive users of administrative decisions into active participants of political procedures. Public institutions and organizations can benefit from methods and tools able to aggregate and interpret ... Keywords: citizen engagement, information aggregation markets, public participation

Efthimios Bothos; Dimitris Apostolou; Gregoris Mentzas

2011-08-01T23:59:59.000Z

62

Scientist Engagement & Redirection - Global Initiatives in Proliferati...  

NLE Websites -- All DOE Office Websites (Extended Search)

program inception in 1994, GIPP has engaged more than 17,000 scientists (> 60% having direct experience working with WMD) at over 180 facilities in the Newly Independent States...

63

Stakeholder collaboration and engagement in virtual projects  

Science Conference Proceedings (OSTI)

Stakeholder management is an important and common practice in any project, as it allows managers to better manage process, performance and risk. In virtual projects, collaboration and engagement with stakeholders is relatively more complex, challenging, ...

Ofer Zwikael; Arun A. Elias; Mark J. Ahn

2012-03-01T23:59:59.000Z

64

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs Energy Cooperative Mille Lacs Energy Cooperative (Redirected from Mille Lacs Electric Coop) Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting

65

Yang-Mills Gravity in Biconformal Space  

E-Print Network (OSTI)

We propose a new conformal supergravity model with direct relevance to string/gauge theory dualities. This biconformal supergravity theory is formulated with a Yang-Mills type action. The resulting 8-dim symplectic geometries describe 4-dim scale-invariant general relativity. We then show an extension of N = 4 SUSY Yang-Mills to a curved biconformal geometry such that the extended form of the Yang-Mills fields provides the curvatures for the biconformal space. These curvatures solve the biconformal field equations whenever the original 4-dim fields satisfy the 4-dim YM theory. This gives a 1-1 mapping between the gravity and gauge theories. We also display systematic extension of any spacetime co-tangent bundle to a biconformal space, and extension of any 4-dim Yang-Mills theory to an equivalent theory on that space. 1

Lara B. Anderson; James T. Wheeler

2008-01-01T23:59:59.000Z

66

Yang- Mills on Quantum Heisenberg Manifolds  

E-Print Network (OSTI)

In the noncommutative geometry program of Connes there are two variations of the concept of Yang-Mills action functional. We show that for the quantum Heisenberg manifolds they agree.

Partha Sarathi Chakraborty; Satyajit Guin

2013-04-29T23:59:59.000Z

67

DOE Announces Webinars on Engaging Students in Energy, Challenges...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More DOE Announces Webinars on Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More...

68

DCnet Research Network David L. Mills  

E-Print Network (OSTI)

Washington, DC Evans-gw and mudge-gw are dual-redundant EECIS department routers for 10/100-Mb campus printer server 128.4.2.21 wiley Pentium II 450MHz Windows XP Beverly Mills #12;2-Aug-04 10 DC MITBBN BELL2-Aug-04 1 DC MITBBN BELL DARPA UDEL DCnet Research Network David L. Mills University of Delaware

Mills, David L.

69

Influences on Burr Size During Face-Milling of Aluminum Alloys and Cast Iron  

E-Print Network (OSTI)

ON BURR SIZE DURING FACE-MILLING OF ALUMINUM-SILICON ALLOYSburrs formed during face milling. Other influences are tooliron. INTRODUCTION Face milling is a common procedure during

Shefelbine, Wendy; Dornfeld, David

2004-01-01T23:59:59.000Z

70

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Part Orientation for Face Milling, in: Annals of the CIRP,2010): Environmental Analysis of Milling Machine Tool Use inand Reduction Strategies for Milling Machine Tool Use Nancy

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

71

Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments  

E-Print Network (OSTI)

Environmental Analysis of Milling Machine Tool Use inHorvath, David Dornfeld Milling is a type of cutting processof a standard vertical milling machine tool. In this

Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

2010-01-01T23:59:59.000Z

72

Jet milling from a particle perspective : predicting particle fracture based on mechanical material properties.  

E-Print Network (OSTI)

??Milling is a very old discipline originated in milling agricultural products to flour. Despite the enormous literature on size reduction, milling is a unit operation… (more)

Vegt, Onno Martinus

2007-01-01T23:59:59.000Z

73

Engaging online learners: The impact of Web-based learning technology on college student engagement  

Science Conference Proceedings (OSTI)

Widespread use of the Web and other Internet technologies in postsecondary education has exploded in the last 15years. Using a set of items developed by the National Survey of Student Engagement (NSSE), the researchers utilized the hierarchical linear ... Keywords: College, Deep learning, Engagement, NSSE, Online learning, University, Web-based

Pu-Shih Daniel Chen; Amber D. Lambert; Kevin R. Guidry

2010-05-01T23:59:59.000Z

74

Better Buildings Neighborhood Program: Step 3: Identify and Engage  

NLE Websites -- All DOE Office Websites (Extended Search)

3: 3: Identify and Engage Financial Partners to someone by E-mail Share Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on Facebook Tweet about Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on Twitter Bookmark Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on Google Bookmark Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on Delicious Rank Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on Digg Find More places to share Better Buildings Neighborhood Program: Step 3: Identify and Engage Financial Partners on AddThis.com... Getting Started Driving Demand Financing Assess the Market

75

Wind Program: Stakeholder Engagement and Outreach  

Wind Powering America (EERE)

Outreach Outreach Printable Version Bookmark and Share The Stakeholder Engagement and Outreach initiative of the U.S. Department of Energy's Wind Program is designed to educate, engage, and enable critical stakeholders to make informed decisions about how wind energy contributes to the U.S. electricity supply. Highlights Resources Wind Resource Maps State Activities What activities are happening in my state? AK AL AR AZ CA CO CT DC DE FL GA HI IA ID IL IN KS KY LA MA MD ME MI MN MO MS MT NC ND NE NH NJ NM NV NY OH OK OR PA RI SC SD TN TX UT VA VT WA WI WV WY Installed wind capacity maps. Features A image of a house with a residential-scale small wind turbine. Small Wind for Homeowners, Farmers, and Businesses Stakeholder Engagement & Outreach Projects

76

Intentionally Including - Engaging Minorities in Physics Careers |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers Intentionally Including - Engaging Minorities in Physics Careers April 24, 2013 - 4:37pm Addthis Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the American Institute of Physics Resources. Joining Director Dot Harris (second from left) were Marlene Kaplan, the Deputy Director of Education and director of EPP, National Oceanic and Atmospheric Administration, Claudia Rankins, a Program Officer with the National Science Foundation and Jim Stith, the past Vice-President of the

77

DOE - Office of Legacy Management -- Monticello Mill Site - UT 03  

NLE Websites -- All DOE Office Websites (Extended Search)

Mill Site - UT 03 Mill Site - UT 03 FUSRAP Considered Sites Site: Monticello Mill Site (UT.03) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monticello, Utah, Disposal and Processing Sites Documents Related to Monticello Mill Site Monticello Mill Tailings Site Operable Unit III Interim Remedial Action Progress Report July 1999-July 2000. GJO-2000-163-TAR. September 2000 U.S. Department of Energy at Grand Junction 2003 Annual Inspection Monticello, Utah November 2003 2005 Annual Inspection of the Monticello Mill Tailings (USDOE) and Monticello Radioactively Contaminated Properties Sites December 2005 Office

78

Strategic Trade Control: Nonproliferation Engagement and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Nonproliferation Engagement and Training Nonproliferation & National Security (NPNS) Overview Technical Nonproliferation Policy Support Strategic Trade Control Review of export license applications Multilateral Export Control Arrangements Interdiction Engagement & Training INECP INSEP GIPP Safeguards Concepts and Approaches Human Capital Development Additional Protocol Technical Assistance National Security Systems & Assessments National Security Information Systems Vulnerability Assessment Team (VAT) Radiation Detection & Response (RDR) Contact NPNS Other Major Programs Work with Argonne Contact us For Employees Site Map Help Join us on Facebook Follow us on Twitter NE Division on Flickr Nonproliferation and National Security Program Technical Nonproliferation Policy Support (TNPS)

79

Communication & Engagement | Department of Energy  

Office of Environmental Management (EM)

You are here You are here Home » Services » Communication & Engagement Communication & Engagement Intergovernmental Programs The Office of Environmental Management supports, by means of grants and cooperative agreements, a number of institutionalized activities and relationships with various national intergovernmental organizations. Read more Environmental Management Advisory Board (EMAB) The mission of the Environmental Management Advisory Board is to provide independent and external advice, information, and recommendations to the Assistant Secretary for Environmental Management (EM) on corporate issues relating to accelerated site clean-advice and risk reduction. Read more Site-Specific Advisory Board (SSAB) At the request of the Office of Environmental Management (EM) Assistant

80

Transportation of the MOAB Uranium Mill Tailings to White Mesa Mill by Slurry Pipeline  

SciTech Connect

The Moab uranium mill tailings pile, located at the former Atlas Minerals Corporation site approximately three miles north of Moab, Utah, is now under the control of the US Department of Energy (''DOE''). The location of the tailings pile adjacent to the Colorado River, and the ongoing contamination of groundwater and seepage of pollutants into the river, have lead to the investigation, as part of the final site remediation program, of alternatives to relocate the tailings to a qualified permanent disposal site. This paper will describe the approach being taken by the team formed between International Uranium (USA) Corporation (''IUC'') and Washington Group International (''WGINT'') to develop an innovative technical proposal to relocate the Moab tailings to IUC's White Mesa Mill south of Blanding, Utah. The proposed approach for relocating the tailings involves using a slurry pipeline to transport the tailings to the White Mesa Mill. The White Mesa Mill is a fully licensed, active uranium mill site that is uniquely suited for permanent disposal of the Moab tailings. The tailings slurry would be dewatered at the White Mesa Mill, the slurry water would be recycled to the Moab site for reuse in slurry makeup, and the ''dry'' tailings would be permanently disposed of in an approved below grade cell at the mill site.

Hochstein, R. F.; Warner, R.; Wetz, T. V.

2003-02-26T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Mill study of the quality yield, and mechanical properties of plywood produced from fast-grown loblolly pine  

SciTech Connect

Veneers were cut from 37 fast-grown pines 20-25 year old and from 27 trees with average growth rates in East Texas. After drying, the veneer was used to make plywood panels with a variety of assembly criteria. The yield and grade of veneer were substantially less from the fast-grown trees with a large core of juvenile wood, than from the slower-grown trees of similar size. The greatest reduction was in veneer grade, with fast-grown trees yielding less than 1% of input volume as grade C or better, while control trees exceeded 20%. Plywood made from fast-grown trees had mechanical properties that were marginal for the species, especially in stiffness and MOE. Bending strength was reduced, but less so. It is concluded that use of fast-grown, short-rotation trees will preclude the production of higher grade panels.

MacPeak, M.D.; Burkhart, L.F.; Weldon, D.

1987-01-01T23:59:59.000Z

82

Rotating Einstein-Yang-Mills Black Holes  

E-Print Network (OSTI)

We construct rotating hairy black holes in SU(2) Einstein-Yang-Mills theory. These stationary axially symmetric black holes are asymptotically flat. They possess non-trivial non-Abelian gauge fields outside their regular event horizon, and they carry non-Abelian electric charge. In the limit of vanishing angular momentum, they emerge from the neutral static spherically symmetric Einstein-Yang-Mills black holes, labelled by the node number of the gauge field function. With increasing angular momentum and mass, the non-Abelian electric charge of the solutions increases, but remains finite. The asymptotic expansion for these black hole solutions includes non-integer powers of the radial variable.

B. Kleihaus; J. Kunz; F. Navarro-Lerida

2002-07-10T23:59:59.000Z

83

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah...

84

Pulp and Paper Mills: Profiting for Efficient Motor System Use...  

NLE Websites -- All DOE Office Websites (Extended Search)

Motor System Use This profile discusses how energy efficienct motor systems can help pulp and paper mills save money. Pulp and Paper Mills: Profiting for Efficient Motor System Use...

85

Pulverizer Maintenance Guide, Volume 1: Raymond Bowl Mills  

Science Conference Proceedings (OSTI)

This guide provides fossil plant personnel with current maintenance information on the Alstom Raymond Bowl mills and will assist a plant in improving the maintenance of the pulverizer mills.

2004-08-27T23:59:59.000Z

86

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill...  

NLE Websites -- All DOE Office Websites (Extended Search)

Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and...

87

Effect of Ball Milling Temperature on the Ultra Fine Grained ...  

Science Conference Proceedings (OSTI)

The mixtures of Fe-14Cr-3W-0.4Ti powder and Y2O3 were ball milled for 40 ... The size of nanoclusters seems to be dependent on milling temperature too.

88

Gravity and Yang?Mills Fields: Geometrical Approaches  

Science Conference Proceedings (OSTI)

A new geometrical framework for a tetrad?affine formulation of gravity coupled with Yang?Mills fields is proposed.

Roberto Cianci; Stefano Vignolo

2005-01-01T23:59:59.000Z

89

Focused Ion Beam Milling (FIB) Information at NIST  

Science Conference Proceedings (OSTI)

Focused Ion Beam Milling (FIB) Information at NIST. Analysis of 3D Elemental Mapping Artifacts in Biological Specimens ...

2010-10-05T23:59:59.000Z

90

Nonperturbative and analytical approach to Yang-Mills thermodynamics  

E-Print Network (OSTI)

An analytical, macroscopic approach to SU(N) Yang-Mills thermodynamics is developed, tested,and applied.

Ralf Hofmann

2004-04-29T23:59:59.000Z

91

Mill Designed Bio bleaching Technologies  

DOE Green Energy (OSTI)

A key finding of this research program was that Laccase Mediator Systems (LMS) treatments on high-kappa kraft could be successfully accomplished providing substantial delignification (i.e., > 50%) without detrimental impact on viscosity and significantly improved yield properties. The efficiency of the LMS was evident since most of the lignin from the pulp was removed in less than one hour at 45 degrees C. Of the mediators investigated, violuric acid was the most effective vis-a-vis delignification. A comparative study between oxygen delignification and violuric acid revealed that under relatively mild conditions, a single or a double LMS{sub VA} treatment is comparable to a single or a double O stage. Of great notability was the retention of end viscosity of LMS{sub VA} treated pulps with respect to the end viscosity of oxygen treated pulps. These pulps could then be bleached to full brightness values employing conventional ECF bleaching technologies and the final pulp physical properties were equal and/or better than those bleached in a conventional ECF manner employing an aggressively O or OO stage initially. Spectral analyses of residual lignins isolated after LMS treated high-kappa kraft pulps revealed that similar to HBT, VA and NHA preferentially attack phenolic lignin moieties. In addition, a substantial decrease in aliphatic hydroxyl groups was also noted, suggesting side chain oxidation. In all cases, an increase in carboxylic acid was observed. Of notable importance was the different selectivity of NHA, VA and HBT towards lignin functional groups, despite the common N-OH moiety. C-5 condensed phenolic lignin groups were overall resistant to an LMS{sub NHA, HBT} treatments but to a lesser extent to an LMS{sub VA}. The inactiveness of these condensed lignin moieties was not observed when low-kappa kraft pulps were biobleached, suggesting that the LMS chemistry is influenced by the extent of delignification. We have also demonstrated that the current generation of laccase has a broad spectrum of operating parameters. Nonetheless, the development of future genetically engineered laccases with enhanced temperature, pH and redox potentials will dramatically improve the overall process. A second challenge for LMS bleaching technologies is the need to develop effective, catalytic mediators. From the literature we already know this is feasible since ABTS and some inorganic mediators are catalytic. Unfortunately, the mediators that exhibit catalytic properties do not exhibit significant delignification properties and this is a challenge for future research studies. Potential short-term mill application of laccase has been recently reported by Felby132 and Chandra133 as they have demonstrated that the physical properties of linerboard can be improved when exposed to laccase without a chemical mediator. In addition, xxx has shown that the addition of laccase to the whitewater of the paper machine has several benefits for the removal of colloidal materials. Finally, this research program has presented important features on the delignification chemistry of LMS{sub NHA} and LMS{sub VA} that, in the opinion of the author, are momentous contributions to the overall LMS chemistry/biochemistry knowledge base which will continue to have future benefits.

Institute of Paper Science Technology

2004-01-30T23:59:59.000Z

92

Tons of Heavy Metals in Mill Creek Sediments Heather Freeman  

E-Print Network (OSTI)

with industries. Paper, woolen, flour, and cotton mills, starch factories, slaughterhouses, distilleriesTons of Heavy Metals in Mill Creek Sediments Heather Freeman 8/30/99 Geology Department Advisors: Dr. Kees DeJong Dr. Barry Manyard Dr. David Nash #12;Tons of heavy metals in Mill Creek sediments

Maynard, J. Barry

93

Focused helium ion beam milling and deposition  

Science Conference Proceedings (OSTI)

The use of a helium ion microscope with an integrated gas injection system for nanofabrication is explored by demonstrating the milling of fine features into single layered graphene and the controlled deposition of tungsten and platinum wires from gaseous ... Keywords: Beam-induced deposition, Focused ion beam, Gas injection system, Graphene, Helium ion microscope

S. A. Boden; Z. Moktadir; D. M. Bagnall; H. Mizuta; H. N. Rutt

2011-08-01T23:59:59.000Z

94

Loop expansion in Yang-Mills thermodynamics  

E-Print Network (OSTI)

We argue that a selfconsistent spatial coarse-graining, which involves interacting (anti)calorons of unit topological charge modulus, implies that real-time loop expansions of thermodynamical quantities in the deconfining phase of SU(2) and SU(3) Yang-Mills thermodynamics are, modulo 1PI resummations, determined by a finite number of connected bubble diagrams.

Ralf Hofmann

2006-09-05T23:59:59.000Z

95

Stakeholder Engagement and Outreach: Webinar Podcasts  

Wind Powering America (EERE)

Webinar Podcasts Webinar Podcasts The Stakeholder Engagement and Outreach initiative hosts a series of webinars on current wind energy issues. Audiovisual files and text versions of each webinar are available. To subscribe, click on the PODCAST button below to open up the feed. Copy the URL from your browser's address bar into your podcast subscription software. For a list of podcast software, see Podcasting News' list of podcast software clients. Podcast Title: Stakeholder Engagement and Outreach Webinar: Jobs and Economic Development Impacts of Offshore Wind Speaker: Aaron Smith, Suzanne Tegen, David Keyser, National Renewable Energy Laboratory Date: November 20, 2013 Running time: 1 hour Title: Small Wind Standards and Policy Update: A WPA Webinar Speaker: Heather Rhoads-Weaver, eFormative Options; Matt Gagne, eFormative

96

National Climate Assessment: Opportunities for Engagement  

NLE Websites -- All DOE Office Websites (Extended Search)

Workshop & Meeting Reports Guidance for Technical Input Teams Available Technical Inputs Draft Report Information Previous Assessments NCA & Development Advisory Committee Production Team Indicators System Coastal Resilience Resources Make Our Science Accessible Link Climate Change & Health Provide Data and Tools Coordinate Internationally National Climate Assessment: Opportunities for Engagement Print E-mail NCA Regional Town Halls Engagement Strategy NCAnet Technical Inputs NCA Regional Town Halls During the winter of 2012-2013, the National Climate Assessment is hosting town hall meetings in each region of the United States. These meetings will bring together climate change experts and users of climate change information, from academia; local, state, tribal, and Federal governments; non-profit organizations; and business and industry. Although the exact format for the meetings will vary somewhat, participants in these meetings will have the opportunity to:

97

Achieving Total Employee Engagement in Energy Efficiency  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Raytheon Employee Engagement Raytheon Employee Engagement in Energy Conservation Department of Energy August 5, 2010 Steve Fugarazzo Raytheon Company Enterprise Energy Team Copyright © 2007 Raytheon Company. All rights reserved. Customer Success Is Our Mission is a trademark of Raytheon Company. Page 2 8/9/2010 Presentation Overview  Company Background  Communication & Outreach Initiatives - Internal Partnerships - Energy Champions - Energy Citizens - Energy Awareness Events & Contests Page 3 8/9/2010 Raytheon ... What We Do Raytheon is a global technology company that provides innovative solutions to customers in 80 nations. Through strategic vision, disciplined management and world-class talent, Raytheon is delivering operational advantages for customers every day while helping them prepare for the

98

Towards designing for competence and engagement in serious games  

Science Conference Proceedings (OSTI)

Through a series of game design experiments evidence was found signifying the importance of feeling competence as a driver for engagement during gameplay. Engagement during gameplay is important both as a motivation to play games, as well as for serious ... Keywords: designing for competence, engagement, experiential learning, game design, self-determination theory, serious games

Erik D. Van Der Spek

2012-09-01T23:59:59.000Z

99

Ozone and UV for Grain Milling Systems  

Science Conference Proceedings (OSTI)

Recognizing the current concerns with food safety, First Energy Services and EPRI collaborated in a project to investigate the feasibility of using ozone as a substitute for chlorinated water to control bacteria and mold at the Harvest States Amber Milling facility in Huron, Ohio. Traditionally, chlorinated water is used to control bacteria and mold in grain processing. Since chlorine usage can be costly and because chlorine presents problems in storage and safe handling of chlorine gas, the project part...

2000-12-13T23:59:59.000Z

100

YANG-MILLS THEORY FOR BUNDLE GERBES  

E-Print Network (OSTI)

Abstract. Given a bundle gerbe with connection on an oriented Riemannian manifold of dimension at least equal to 3, we formulate and study the associated Yang-Mills equations. When the Riemannian manifold is compact and oriented, we prove the existence of instanton solutions to the equations and also determine the moduli space of instantons, thus giving a complete analysis in this case. We also study duality in this context.

Varghese Mathai; David Roberts

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Geothermal Mill Redevelopment Project in Massachusetts  

DOE Green Energy (OSTI)

Anwelt Heritage Apartments, LLC redeveloped a 120-year old mill complex into a mixed-use development in a lower-income neighborhood in Fitchburg, Massachusetts. Construction included 84 residential apartments rented as affordable housing to persons aged 62 and older. The Department of Energy (“DOE”) award was used as an essential component of financing the project to include the design and installation of a 200 ton geothermal system for space heating and cooling.

Vale, A.Q.

2009-03-17T23:59:59.000Z

102

in Topological Yang-Mills Theory  

E-Print Network (OSTI)

We introduce the covariant forms for the non-Abelian anomaly counterparts in topological Yang-Mills theory, which satisfies the topological descent equation modulo terms that vanish at the space of BRST fixed points. We use the covariant anomalies as a new set of observables, which can absorb both ? W and ? BRS ghost number violations of zeromodes. Then, we study some problems due to the zero-modes originated from the reducible connections.

unknown authors

1992-01-01T23:59:59.000Z

103

Electricity generation potential of Thai sugar mills  

SciTech Connect

At present, the total installed electricity generating capacity of Thailand is 7500 MW. Because this level of investment will take an unacceptable large part of total foreign borrowing, the government plans to encourage participation of the private sector in electricity generation. Among the various technology options for power production, cogeneration appears to be the most promising technology due to its very high effectiveness of fuel utilization. Therefore, in the first phase of private power generation, the Thai government is encouraging cogeneration systems. This paper discusses sugar mills, where expertise and equipment for electricity generation already exist, appear to be in a particularly advantageous position to participate in the private power generation program. At present, there are 46 sugar mills in Thailand with a total capacity of 338,000 tons of cane per day. The fiber part delivered from the milling of sugarcane, bagasse, is normally used to produce steam for the process heat and electricity generation. The investment and operating costs for each of these alternatives have been evaluated. The internal rate of return is used to indicate the benefit of each alternative.

Therdyothin, A.; Bhattacharaya, S.C.; Chirarattananon, S. (Asian Inst. of Tech., Bangkok (Thailand))

1992-10-01T23:59:59.000Z

104

Accessibility in 5-Axis Milling Environment  

E-Print Network (OSTI)

Using algorithms from computer graphics, namely hidden line and surface removal, techniques have been constructed to derive the 3-axis visible or millable set of a computer model from a given orientation or simulate and verify machining toolpaths. In this paper, an approach that reduces the accessibility problem of 5-axis milling using a flat end tool into a 3-axis accessibility problem is discussed. Using this approach, global detection of possible gouging into other parts, while a 5-axis flat end mill is in use, is made feasible and collisions can be avoided. Key Words: NURBs, accessibility, 5-axis machining. 1 Introduction Several methods are in use, when freeform computer models are realized using milling machines. Possibly the most common approach utilizes a ball end tool with three degrees of freedom, namely translation in x, y, and z [1, 2, 4, 5, 6, 7]. The ball end center of the tool follows an offset [8] to the model by the tool radius while the ball end surface is tangent to...

Gershon Elber

1997-01-01T23:59:59.000Z

105

Voices of Experience: Insights on Smart Grid Customer Engagement (July  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Voices of Experience: Insights on Smart Grid Customer Engagement Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) The success of the Smart Grid will depend in part on consumers taking a more proactive role in managing their energy use. This document is the result of a nine-month effort to compile information on the successful approaches used by utilities to engage customers regarding smart grid technology deployments. Voices of Experience: Insights on Smart Grid Customer Engagement provides practical advice from utilities that have implemented smart grid projects to educate and engage their customers. Customer engagement within the electric power industry is an evolving, ongoing process that is just beginning to emerge. While this guide may lean

106

Best Practices for Engaging Virtual Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Best Practices for Engaging Virtual Training Best Practices for Engaging Virtual Training Course Title: CCBP-Best Practices for Engaging Virtual Training Date: Online course Time: At your discretion Registration link: Best Practices for Engaging Virtual Training / http://www.trainingindustry.com/webinars/best-practices-for-engaging-virtual-training.aspx Course type: Recorded Webinar Course Location: N/A Course Description: Ensuring that virtual training is engaging and grabs the attention of the audience is crucial to the success of the program. Join us for this TrainingIndustry.com webinar, presented on the Adobe Connect platform, to hear Jacqueline Beck, a Master Trainer for Adobe, share her expertise and tips on best practices for engaging learners in the

107

Voices of Experience: Insights on Smart Grid Customer Engagement (July  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Voices of Experience: Insights on Smart Grid Customer Engagement Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) Voices of Experience: Insights on Smart Grid Customer Engagement (July 2013) The success of the Smart Grid will depend in part on consumers taking a more proactive role in managing their energy use. This document is the result of a nine-month effort to compile information on the successful approaches used by utilities to engage customers regarding smart grid technology deployments. Voices of Experience: Insights on Smart Grid Customer Engagement provides practical advice from utilities that have implemented smart grid projects to educate and engage their customers. Customer engagement within the electric power industry is an evolving, ongoing process that is just beginning to emerge. While this guide may lean

108

Stakeholder Engagement and Outreach: Information Resources  

Wind Powering America (EERE)

Information Information Resources Printable Version Bookmark and Share Publications Success Stories Webinars Podcasts Videos Stakeholder Interviews Lessons Learned Wind Working Groups Economic Impact Studies Wind Turbine Ordinances Information Resources These information resources include links to wind energy videos, audio files, and publications. A photo of the wind turbine next to the greenhouse. Ponderosa High School administrators in Flagstaff, Arizona have taken on projects like the greenhouse and the renewable energy installation and a number of others around their campus in order to make it a school of opportunity and a school that's a great example for others. Success Stories Read about the Stakeholder Engagement and Outreach initiative's success stories. Stakeholder Interviews

109

DOE - Office of Legacy Management -- Edgemont Mill Site - SD 01  

Office of Legacy Management (LM)

Edgemont Mill Site - SD 01 Edgemont Mill Site - SD 01 FUSRAP Considered Sites Site: Edgemont Mill Site (SD.01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Edgemont, South Dakota, Disposal Site Documents Related to Edgemont Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title II Disposal Sites-Edgemont, South Dakota, Disposal Site. LMS/S09415. November 2012 U.S. Department of Energy 2008 UMTRCA Title II Sites Annual Report November 2008 Edgemont, South Dakota FACT SHEET Office of Legacy Management Edgemont, South Dakota, Disposal Site This fact sheet provides information about the Uranium Mill

110

Injection Molding of Tungsten Powder Treated by Jet Mill  

Science Conference Proceedings (OSTI)

Tungsten powder was firstly treated by jet mill, resulting in the improvement of ... and Welding Conditions of Monopile and Transition for Offshore Wind Plant.

111

Nanoestructured Altisin Coatings For Ball Helical Milling Application ...  

Science Conference Proceedings (OSTI)

Abstract Scope, The current power wind generation industry uses for its power ... In this work the behavior and improvement of tool life for ball end mills with ...

112

DOE - Office of Legacy Management -- Lowman Mill Site - ID 01  

Office of Legacy Management (LM)

Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Lowman, Idaho, Disposal Site Documents Related to Lowman Mill Site Historical documents may contain...

113

Monticello Mill Tailings, Operable Unit III Surface and Ground...  

Office of Legacy Management (LM)

Action activities included millsite dewatering and treatment, initiation of a ground water management policy to prevent use Monticello Mill Tailings Site, Operable Unit III...

114

Influence of Milling Time on Microstructure and Thermoelectric ...  

Science Conference Proceedings (OSTI)

Presentation Title, Influence of Milling Time on Microstructure and Thermoelectric Properties of p-Type Bi2Te3 Alloys. Author(s), Madavali Babu, Hyo Seob Kim, ...

115

(ns) Al-2024 Alloy Obtained via Cryogenic Milling  

Science Conference Proceedings (OSTI)

Milling Al-2024 powder of big particle size (>100 microns) in cryogenic regime resulted in nanostructured powder of 46 nm grain size after 18h. Furthermore ...

116

A Computer Simulation of an Agitation Mill Abrasion Process for ...  

Science Conference Proceedings (OSTI)

We already confirmed that a special and selective grinding such as parts abrasion from the board using agitation mill was effective for the recycling of a part of ...

117

Development and Characterization of Milled Silver Powder Addition ...  

Science Conference Proceedings (OSTI)

In order to add the milled Ag powders to granular PP feedstock two different .... Membranes Obtained from PA6/HDPE Blends Via Precipitation by Immersion.

118

Potential for reducing paper mill energy use and carbon dioxide...  

NLE Websites -- All DOE Office Websites (Extended Search)

Li Journal Applied Energy Volume 102 Date Published 022013 Keywords co2 emissions, energy audit, paper mill Abstract The pulp and paper industry is one of the most...

119

Effect of enzyme application in temper water on wheat milling.  

E-Print Network (OSTI)

??The effect of enzyme in temper water on wheat milling performance and flour quality was studied. Five independent variables, enzyme concentration, incubation time, incubation temperature,… (more)

Yoo, Juhyun

2007-01-01T23:59:59.000Z

120

DOE - Office of Legacy Management -- Falls City Mill Site - TX...  

NLE Websites -- All DOE Office Websites (Extended Search)

Materials Handled: Radiological Survey(s): Site Status: Also see Falls City, Texas, Disposal Site Documents Related to Falls City Mill Site Data Validation Package for...

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Engineering assessment of inactive uranium mill tailings  

SciTech Connect

The Grand Junction site has been reevaluated in order to revise the October 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Grand Junction, Colorado. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.9 million tons of tailings at the Grand Junction site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The eight alternative actions presented herein range from millsite and off-site decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $10,200,000 for stabilization in-place to about $39,500,000 for disposal in the DeBeque area, at a distance of about 35 mi, using transportation by rail. If transportation to DeBeque were by truck, the cost estimated to be about $41,900,000. Three principal alternatives for the reprocessing of the Grand Junction tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $200/lb by heap leach and $150/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery appears not to be economically attractive.

Not Available

1981-07-01T23:59:59.000Z

122

Summary Report on Industrial and Regulatory Engagement Activities |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summary Report on Industrial and Regulatory Engagement Activities Summary Report on Industrial and Regulatory Engagement Activities Summary Report on Industrial and Regulatory Engagement Activities The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies pathway of the Light Water Reactor Sustainability(LWRS) Program conducts a vigorous engagement strategy with the U.S. nuclear power industry, including the nuclear operating companies, major support organizations, the Nuclear Regulatory Commission (NRC), and suppliers. The goal of this engagement strategy is to develop a shared vision and common understanding across the nuclear industry of the need for II&C modernization, the performance improvement that can be obtained, and the opportunities for collaboration to enact this vision. The primary means of engaging the nuclear operating companies is through a

123

Chapter 2: uranium mines and mills  

SciTech Connect

This chapter will be included in a larger ASCE Committee Report. Uranium mining production is split between underground and open pit mines. Mills are sized to produce yellowcake concentrate from hundreds to thousands of tons of ore per day. Miner's health and safety, and environmental protection are key concerns in design. Standards are set by the US Mine Safety and Health Administration, the EPA, NRC, DOT, the states, and national standards organizations. International guidance and standards are extensive and based on mining experience in many nations.

O'Connell, W.J.

1983-03-01T23:59:59.000Z

124

Applications of Yang-Mills thermodynamics  

Science Conference Proceedings (OSTI)

We discuss the postulate that the U(1) gauge group describing photon propagation results from a dynamically broken SU(2) gauge theory. In the context of Yang-Mills thermodynamics such a symmetry breaking occurs via the non-trivial ground state. As a result of the interaction with the quasi particles of the theory the photon acquires an effective, temperature and momentum dependent, mass. We explain how this leads to modified black body spectra at temperatures of about 5 K. Furthermore, we discuss the properties and effects of an emergent longitudinal polarization.

Schwarz, Markus [Salierstr. 10.,76137 Karlsruhe (Germany)

2012-09-26T23:59:59.000Z

125

Fundamental and effective Yang-Mills vertices  

SciTech Connect

Calorons and plane waves within and in between them collectively give rise to a thermal ground state. The latter provides a homgeneous energy density and a negative pressure, and it induces quasiparticle masses to part of the propagating spectrum of deconfining SU(2) Yang-Mills thermodynamics (dynamical gauge-symmetry breaking). In the present talk we discuss the role of a single caloron in inducing effective local vertices, characterized by powers of h, mediating the interaction of plane waves which propagate over large distances. The constraints on momentum transfers through effective 4-vertices are revisited.

Hofmann, Ralf [ITP, Universitaet Heidelberg, Philosophenweg 16, 69120 Heidelberg (Germany)

2012-09-26T23:59:59.000Z

126

Stakeholder Engagement and Outreach: Wind Energy Videos  

Wind Powering America (EERE)

Wind Energy Videos Wind Energy Videos This page lists wind energy videos. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Subject Category All Agricultural Public Power Schools Small Wind Economic Development Policy Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 30 records found. Page 1 of 6, Sorted by descending date Filtered by: Video 1 2 3 4 5 6 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title 1/29/2013 KS News Video Kansas State University Videos Explore Wind Energy [..More] 10/22/2012 NE News

127

Stakeholder Engagement and Outreach: Public Power Resources  

Wind Powering America (EERE)

Public Power Public Power Resources Regional Activities State Activities State Lands Siting Public Power Resources This page lists wind-related information resources such as publications, websites, and news for public power. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 81 records found. Page 1 of 17, Sorted by descending date Filtered by: Public Power 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

128

Stakeholder Engagement and Outreach: Native American Resources  

Wind Powering America (EERE)

Resources Resources This page lists resources and tools specifically for Native Americans. Read personal interviews with Native Americans who have experience installing wind power on Native American lands, find wind resource maps that have Indian Reservation boundaries, and watch a video about installing wind power on Native American lands. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 42 records found. Page 1 of 9, Sorted by descending date Filtered by: Native Americans 1 2 3 4 5 6 7 8 9 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

129

The Milling Stone Horizon Revisited: New Perspectives from Northern and Central California  

E-Print Network (OSTI)

Berryessa II. Journal THE MILLING STONE HORIZON REVISITEDI, pp. 67-93 (1999). The Milling Stone Horizon Revisited:nearly half a century, the Milling Stone Horizon has been

Fitzgerald, Richard T.; Jones, Terry L.

1999-01-01T23:59:59.000Z

130

Back Cutting and Tool Wear Influence on Burrs in Face Milling - Analysis and Solutions  

E-Print Network (OSTI)

of uncoated and coated milling inserts”, Wear, 225/229, ppBurr Minimization in Face Milling: A Geometric Approach,System for Burr i n Face Milling”, Journal of Manufacturing

Rangarajan, Arvind; Dornfeld, David A

2004-01-01T23:59:59.000Z

131

A Study of Surface Roughness in the Micro-End-Milling Process  

E-Print Network (OSTI)

adaptive control of end milling operations,” Proc. NAMRC-iv,generation in dynamic milling,” ASME J. Eng. Ind. , 113,produced with the micro- end-milling process. Alauddin, M. ,

Lee, Kiha; Dornfeld, David A

2004-01-01T23:59:59.000Z

132

The Possibilities of Women and Men: Gender and the California Milling Stone Horizon  

E-Print Network (OSTI)

Richard 1991 Archaic Milling Cultures of the Southern SanGender and the California Milling Stone Horizon KELLY R.those subsumed under the Milling Stone Horizon, that are not

McGuire, Kelly R; Hildebrandt, William R

1994-01-01T23:59:59.000Z

133

Success Factors for Supporting Intercultural Engagement of Employees towards Sustainability.  

E-Print Network (OSTI)

??The goal of this thesis is to contribute to the overall progress of society towards sustainability by supporting the engagement of employees of multinational organizations.… (more)

Stinnette, Nathan; Li, Zhuona

2010-01-01T23:59:59.000Z

134

SLAC National Accelerator Laboratory - SLAC Engages Youth, Families...  

NLE Websites -- All DOE Office Websites (Extended Search)

SLAC Engages Youth, Families at 2012 USA Science & Engineering Festival By Andy Freeberg May 7, 2012 With more than 150,000 participants, the second annual USA Science &...

135

Engaging Non-IT Executives in IT Infrastructure Decisions  

E-Print Network (OSTI)

This case study describes how information technology (IT) managers from Insurance Co. successfully engaged non-IT executives in IT infrastructure investment decisions. This

Fonstad, Nils O.

2008-07-01T23:59:59.000Z

136

8 Great Strategies to Engage Tenants on Energy Efficiency | ENERGY...  

NLE Websites -- All DOE Office Websites (Extended Search)

This 45-slide PDF presentation details eight ways to engage your employees and tenants in saving energy. It also includes plenty of examples from successful ENERGY STAR partners...

137

Uranium Mill Tailings Remedial Action Project surface project management plan  

SciTech Connect

This Project Management Plan describes the planning, systems, and organization that shall be used to manage the Uranium Mill Tailings Remedial Action Project (UMTRA). US DOE is authorized to stabilize and control surface tailings and ground water contamination at 24 inactive uranium processing sites and associated vicinity properties containing uranium mill tailings and related residual radioactive materials.

Not Available

1994-09-01T23:59:59.000Z

138

Energy Conservation in the Food Industry : Terminal Flour Mill.  

SciTech Connect

This report presents the results of an energy study that was conducted at Terminal Flour Mill in Portland, Oregon. Terminal Flour Mill is one of five food industry (SIC 20) plants that are being studied. Energy conservation measures (ECM's) are divided into two groups; operation and maintenance (O and M) measures, and equipment modification measures.

United Industries Corporation.

1985-03-01T23:59:59.000Z

139

EA-1155: Ground-water Compliance Activities at the Uranium Mill...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook,...

140

The Vertical Ball Mill for the Grinding of Calcined Petroleum Coke to ...  

Science Conference Proceedings (OSTI)

A new vertical ball ring mill concept has been developed based on the results of research on the grinding of calcined petroleum coke. Industrial vertical mills are ...

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Removal of Thiosalts using Biomass Ash from Pulp and Paper Mill ...  

Science Conference Proceedings (OSTI)

Biomass ash used in this study is collected from Corner Brook Pulp and Paper Mill, NL and Zellstoff Celgar Mill, BC and is characterized to understand the ...

142

Synthesis of Sm-Fe-N Hard Magnets by Reactive Mechanical Milling  

Science Conference Proceedings (OSTI)

In this study, we have performed reactive mechanical milling on Sm2Fe17 alloy under hydrogen atmosphere. After reactive mechanical milling, the Sm2Fe17 ...

143

EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

198: Uranium Mill Tailings Remedial Action Groundwater Project 198: Uranium Mill Tailings Remedial Action Groundwater Project EIS-0198: Uranium Mill Tailings Remedial Action Groundwater Project SUMMARY This EIS assesses the potential programmatic impacts of conducting the Ground Water Project, provides a method for determining the site-specific ground water compliance strategies, and provides data and information that can be used to prepare site-specific environmental impacts analyses more efficiently. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD April 28, 1997 EIS-0198: Record of Decision Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project (April 1997) December 1, 1996 EIS-0198: Programmatic Environmental Impact Statement Uranium Mill Tailings Remedial Action (UMTRA) Ground Water Project

144

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Removal Project Celebrates 5 Years of Success Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

145

DOE - Office of Legacy Management -- Uravan Mill Site - CO 02  

Office of Legacy Management (LM)

Uravan Mill Site - CO 02 Uravan Mill Site - CO 02 FUSRAP Considered Sites Site: Uravan Mill Site (CO.02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Uravan Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

146

Moab Mill Tailings Removal Project Celebrates 5 Years of Success |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success Moab Mill Tailings Removal Project Celebrates 5 Years of Success October 3, 2012 - 12:00pm Addthis Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Pictured here is the Moab uranium mill tailings pile. Tailings excavation and conditioning activities are seen in the foreground. The water spray is used to eliminate extracted contaminated groundwater. Moab Federal Project Director Donald Metzler stands on a final cover layer of the disposal cell. Several other layers are visible behind him. Moab Federal Project Director Donald Metzler stands on a final cover layer

147

Our engagement with Brazil Nosso compromisso com o Brasil  

E-Print Network (OSTI)

Our engagement with Brazil Nosso compromisso com o Brasil #12;2 A STRATEGIC PARTNERSHIP A strategic partnership Our engagement with Brazil The University of Birmingham and The University of Nottingham first and mobility of staff and students n Interactions with industry in both Brazil and Europe to enhance research n

Birmingham, University of

148

DOE Announces Webinars on Engaging Students in Energy, Challenges in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Engaging Students in Energy, Challenges Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More DOE Announces Webinars on Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More December 12, 2013 - 10:21am Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars December 13: Live Webinar on Engaging Students in Energy Webinar Sponsor: EERE's Education and Workforce Development The Energy Department will present a live webcast titled "Engaging

149

DOE Announces Webinars on Engaging Students in Energy, Challenges in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE Announces Webinars on Engaging Students in Energy, Challenges DOE Announces Webinars on Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More DOE Announces Webinars on Engaging Students in Energy, Challenges in Hydrogen Infrastructure, and More December 12, 2013 - 10:21am Addthis EERE offers webinars to the public on a range of subjects, from adopting the latest energy efficiency and renewable energy technologies to training for the clean energy workforce. Webinars are free; however, advanced registration is typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars December 13: Live Webinar on Engaging Students in Energy Webinar Sponsor: EERE's Education and Workforce Development The Energy Department will present a live webcast titled "Engaging

150

Engaging Hispanic Leadership in the Federal Government | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Engaging Hispanic Leadership in the Federal Government Engaging Hispanic Leadership in the Federal Government Engaging Hispanic Leadership in the Federal Government August 24, 2011 - 11:55am Addthis Engaging Hispanic Leadership in the Federal Government "Hispanics United in Strengthening America," this year's theme for the National Organization for Mexican American Rights, Inc. (NOMAR) Training Conference, speaks to recruiting, training, and engaging a diverse workforce to accomplish our country's goals. Bill Valdez, Acting Director of the Office of Economic Impact and Diversity, will be joining invited NOMAR conference participants at the Tropicana Las Vegas Hotel in Las Vegas, Nevada to co-lead a general session on job outlook, Hispanic representation, and Federal employment. Elizabeth Montoya, Chief of Staff and Director of External Affairs at the

151

Yang-Mills Propagators and QCD  

E-Print Network (OSTI)

We present a strong coupling expansion that permits to develop analysis of quantum field theory in the infrared limit. Application to a quartic massless scalar field gives a massive spectrum and the propagator in this regime. We extend the approach to a pure Yang-Mills theory obtaining analogous results. The gluon propagator is compared satisfactorily with lattice results and similarly for the spectrum. Comparison with experimental low energy spectrum of QCD supports the view that $\\sigma$ resonance is indeed a glueball. The gluon propagator we obtained is finally used to formulate a low energy Lagrangian for QCD that reduces to a Nambu-Jona-Lasinio model with all the parameters fixed by those of the full theory.

Marco Frasca

2008-07-27T23:59:59.000Z

152

Mille Lacs Energy Cooperative | Open Energy Information  

Open Energy Info (EERE)

Jump to: navigation, search Jump to: navigation, search Name Mille Lacs Energy Cooperative Place Minnesota Utility Id 12546 Utility Location Yes Ownership C NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Dual Fuel Space Heating Rate Electric Combination Heating Rate Freedom Heating Rate Residential General Service Residential Green Power Energy Large Power Commercial Large Power - Industrial Industrial Light - 100 watt HPS Lighting Light - 150 watt HPS Lighting Off-Peak Energy Rate Residential Peak Shave Water Heating Rate Residential

153

Radiative Corrections in Yang-Mills thermodynamics  

Science Conference Proceedings (OSTI)

We provide arguments why the loop expansion of the pressure in the effective theory for the deconfining phase of SU(2) Yang-Mills thermodynamics is likely to terminate at a finite order despite the fact that the effective gauge coupling is large (e{>=}{radical}(8){pi}). Each order l of the expansion measures the lth power of the fraction of a typical residual action of the quantum fluctuation in one loop S{sub l} and h. Here S{sub l} rapidly decreases with l. This is demonstrated by a computation of irreducible 2-loop and 3-loop diagrams which correct the pressure of free quasiparticles radiatively. In fact, at the three-loop level, one diagram vanishes identically. By benchmarking with known 2-loop results we show that the Monte-Carlo method used to compute on the 3-loop level is reliable.

Kaviani, Dariush [IPPP, University of Durham, South Rd, Durham DH1 3LE (United Kingdom)

2011-09-22T23:59:59.000Z

154

Kieffer Paper Mill's Recycled Fiber Mill and PSI Energy's High Efficiency Motors Plan  

E-Print Network (OSTI)

The needs of electricity consumers along with the utility industry are rapidly changing. Consumers want electricity to perform more functions, improve efficiencies and help lower the cost of production, all in an environmentally responsible manner. In 1991, PSI Energy developed a comprehensive Demand-Side Management program, called Energy Matters™, aimed at improving the overall end-use efficiency of its customers. Its goal is to reduce summer peak demand 120 megawatts by the summer of 1995. Kieffer Paper Mills in Brownstown, IN had a need to address the efficiency of its new, state-of-the-art pulp processing mill that it was building. With over 4,000 horsepower of process motors going into the new plant, even a modest improvement in motor efficiency would yield significant energy savings. PSI Energy was able to help Kieffer examine the economics of high efficiency motors, and through the PSI Energy High Efficiency Motors Plan encouraged Kieffer Paper Mills to purchase energy efficient motors by helping pay part of the cost differential between high efficiency and standard efficiency models.

Myers, J. A.

1993-03-01T23:59:59.000Z

155

Dams, Mills, and Electric Power (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mills, and Electric Power (Missouri) Mills, and Electric Power (Missouri) Dams, Mills, and Electric Power (Missouri) < Back Eligibility Commercial Industrial Institutional Investor-Owned Utility Local Government Municipal/Public Utility Retail Supplier Rural Electric Cooperative State/Provincial Govt Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Missouri Program Type Siting and Permitting Provider Missouri Department of Natural Resources The Water Resources Center of the Missouri Department of Natural Resources is responsible for implementing regulations pertaining to dam and reservoir safety. Any person or corporation may erect a dam across any watercourse, provided that: (a) the entity is chartered to construct, operate and

156

Milling Machine Replacement Project (4587), 5/11/2012  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Milling Machine Replacement Projects (4587) Milling Machine Replacement Projects (4587) Program or Field Office: Y-12 Site Office Location(s) (City/County/State): Oak Ridge, Anderson County, Tennessee Proposed Action Description: Submit by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital network communication (DNC) system. Categorical Exclusion(s) Applied: 81.31 -Installation or relocation of machinery and equipment For the complete DOE National Environmental Policy Act regulations regarding categorical exclusions, including the full text of each categorical exclusion, see Subpart D of 10 CFR Part 1021. Regulatory Requirements in 10 CFR 1021.410(b): (See full text in regulation)

157

East Millinocket Mill Biomass Facility | Open Energy Information  

Open Energy Info (EERE)

Millinocket Mill Biomass Facility Millinocket Mill Biomass Facility Jump to: navigation, search Name East Millinocket Mill Biomass Facility Facility East Millinocket Mill Sector Biomass Location Penobscot County, Maine Coordinates 45.3230777°, -68.5806727° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.3230777,"lon":-68.5806727,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

158

DOE - Office of Legacy Management -- Marion Mill Site - CO 09  

Office of Legacy Management (LM)

Marion Mill Site - CO 09 Marion Mill Site - CO 09 FUSRAP Considered Sites Site: MARION MILL SITE (CO.09 ) Eliminated from further consideration under FUSRAP - deferred to the State of Colorado for appropriate action. Designated Name: Not Designated Alternate Name: None Location: Sugar Leaf Road , Boulder , Colorado CO.09-1 Evaluation Year: Circa 1983 CO.09-1 Site Operations: Milled and processed thorite and other rare earth ores in 1957 and 1958. Some of the thorium concentrate produced was shipped to Davison Chemical Company for further processing. CO.09-1 CO.09-3 Site Disposition: Eliminated - Site was licensed by AEC and the State of Colorado CO.09-2 CO.09-3 Radioactive Materials Handled: Yes Primary Radioactive Materials Handled: Thorium, Natural Uranium, Other Rare Earth Ores CO.09-1

159

DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technical Assistance Contract for Moab Mill Tailings Technical Assistance Contract for Moab Mill Tailings Cleanup DOE Awards Technical Assistance Contract for Moab Mill Tailings Cleanup May 31, 2012 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati-The U.S. Department of Energy (DOE) today announced the award of an $18 million small disadvantaged business contract with S&K Aerospace, LLC, of St. Ignatius, Montana to continue to provide technical assistance services for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project in Moab, Utah. The basic contract is for three years with two one-year options to extend, for a total of up to five years. S&K Aerospace, LLC, a tribal organization 8(a) small business, will assist in the Department's removal of uranium tailings at the former Atlas

160

Process for Transition of Uranium Mill Tailings Radiation Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term...

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

SU(2) Yang-Mills thermodynamics and photon physics  

E-Print Network (OSTI)

Based on quantitative predictions enabled by a nonperturbative approach to Yang-Mills thermodynamics it is explained why the physics of photon {\\sl propagation} is not unlikely rooted in pure SU(2) gauge dynamics.

Ralf Hofmann

2007-10-05T23:59:59.000Z

162

Moab Mill Tailings Removal Project Plans to Resume Train Shipments...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off...

163

FSME Procedure Approval Termination of Uranium Milling Licenses in Agreement  

E-Print Network (OSTI)

Any changes to the procedure will be the responsibility of the FSME Procedure Contact. Copies of the FSME procedures will be available through the NRC website. Procedure Title: Termination of Uranium Milling

Robert J. Lewis; A. Duncan White; William R. Rautzen

2010-01-01T23:59:59.000Z

164

DOE Announces Preferred Alternatives For Moab, Utah, Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE))

WASHINGTON, DC – The U.S. Department of Energy today announced the department’s preferred alternatives for remediation of the Moab, Utah, Uranium Mill Tailings Remedial Action Project Site:  active...

165

A hybrid type small 5-axis CNC milling machine  

E-Print Network (OSTI)

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

166

Analytical approach to nonperturbative Yang-Mills thermodynamics  

E-Print Network (OSTI)

An analytical and inductive approach to hot SU(N) Yang-Mills dynamics is developed. For N=2,3 pressure and energy density are pointwise compared with lattice data.

Ralf Hofmann

2003-12-03T23:59:59.000Z

167

Yank-Mills fields and hypersurface twistors  

SciTech Connect

The author establishes a one-to-one correspondence between (not necessarily self-dual) solutions of the non-abelian source-free Yang-Mills equations on Minkowski space, and pairs of cohomology classes ({gamma}), ({phi}). If O(n) is the sheaf of holomorphic sections of the n{sup th} tensor power of the hyperplane line bundle over C P{sup 1}, and g is the Lie algebra of the gauge group, ({gamma}) {var epsilon} H{sub CR}{sup 1} (PN circumflex,g) and defines a deformation C-R({gamma}) of the canonical C-R structure on a principal bundle over PN circumflex, the subset of null twistor space PN, representing unscaled null geodesics in Minkowski space. ({phi}) {var epsilon} H{sub CR({gamma})}{sup 1} (PN,O({minus}4) {direct product} g). The spin-bundle over Minkowski space is used in the construction. This bundle is foliated by a congruence of lines; each of these lines projects into a null geodesic in Minkowski space, and corresponds to a point in N. The restriction S of the spin-bundle to a spacelike hyperplane in Minkowski space is transversal to this foliation, and PN is identified with S. ({gamma}) encodes certain components of the Yang-Mills connection on S, and ({phi}) encodes the self-dual part of the field on S. They give initial values for a system of evolution equations in the spin-bundle. This system is composed by four first order ordinary differential equations along the lines in the foliation of the spin-bundle, with some of the right-hand sides given by integrals on the fiber over a point in Minkowski space, and a partial differential equation on this fiber. The evolution equations simplify largely in the case of an abelian gauge group. In the case of anti-self-dual fields, the system reduces to two ordinary differential equations along the lines in the foliation of the spin-bundle, and the differential equation on the fiber over each point in Minkowski space. He studies the modifications in the construction when sources are present.

Fioravanti, M.A.

1989-01-01T23:59:59.000Z

168

International Fuel Services and Commercial Engagement | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement International Fuel Services and Commercial Engagement The Office of International Nuclear Energy Policy and Cooperation (INEPC) primary mission is to oversee and manage the Department's international commercial nuclear fuel management initiatives, and to support Departmental/USG initiatives supporting advocacy for U.S. nuclear exports, including the Team USA initiative. INEPC also supports advancing international civil nuclear policy through the development of innovative approaches to used fuel storage and permanent disposition, including commercially-based comprehensive fuel services and financing vehicles. Program Focuses To achieve these goals, INEPC has taken a leadership role in the following: Leading U.S. government engagement to advance CFS as an option for

169

Promoting NEPA Transparency and Public Engagement | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Promoting NEPA Transparency and Public Engagement Promoting NEPA Transparency and Public Engagement Promoting NEPA Transparency and Public Engagement June 3, 2011 - 1:14pm Addthis "NEPA is, at its core, a transparency statute," said Katie Scharf, Council on Environmental Quality (CEQ) Deputy General Counsel, in opening a panel discussion on using information technology to support open government initiatives, engage the public, and add value to NEPA analysis. At the March 9, 2011, event - hosted by CEQ for Federal NEPA and legal staff - speakers promoted the benefits of enhancing transparency and offered practical implementation advice. Ms. Scharf asked the speakers to address why transparency is essential to the NEPA process and describe innovative approaches and achievements. NEPA's value, especially with regard to EISs, is based on transparency,

170

Stakeholder Engagement and Outreach Webinar: Jobs and Economic Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Stakeholder Engagement and Outreach Webinar: Jobs and Economic Stakeholder Engagement and Outreach Webinar: Jobs and Economic Development Impacts of Offshore Wind Stakeholder Engagement and Outreach Webinar: Jobs and Economic Development Impacts of Offshore Wind November 20, 2013 3:00PM EST Online Starting more than a year ago, NREL initiated work to expand the Jobs and Economic Development Impacts (JEDI) model to include fixed-bottom offshore wind technology. Following the completion of the model (and in partnership with the DOE Wind Program, Illinois State University, and James Madison University), NREL supported the analysis of the regional jobs and economic impacts of offshore wind for the Great Lakes, Mid-Atlantic, Southeast, and Gulf Coast regions. The November Stakeholder Engagement and Outreach webinar will provide an overview of the new offshore wind JEDI model and

171

Tuesday Webcasts for Industry: Engaging Supply Chains in Energy Management  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Engaging Supply Engaging Supply Chains in Energy Management April 10, 2012 2 | Advanced Manufacturing Office eere.energy.gov * Overview and Welcome * Engaging Supply Chains in Energy Management - Ron Reising, EUISSCA * 2012 Supplier Sustainability Outreach Program - Eric Battino, PepsiCo * Questions and Answers * Accessing Slides Agenda April 10, 2012 Engaging Supply Chains in Energy Management 4 Current members include 16 of the largest electric utilities in the U.S. Electric Utility Sustainable Supply Chain Alliance Alliance members represent:  Combined revenues of over $100 billion  Over 44 million customers across 27 states  Over $25 billion in non-fuel spend  The Alliance's vision is to lead the electric utility industry in the

172

Replacing chemicals in recycle mills with mechanical alternatives  

DOE Green Energy (OSTI)

A high-intensity spark fired underwater decomposes a small amount of the water into hydroxyl radicals, which are strong oxidants. These are able to oxidize contaminants such as glue and wood pitch that enter paper recycling mills as a part of the incoming furnish and cost the industry several hundred million dollars. The sparking technique is safe, inexpensive, and is capable of treating large volumes of water, which makes it attractive for mill applications. Several mill trials were run. Sparking caused a decrease in the tack of the deposits in one case. Lower bleach use occurred in two other mills; sparking reduced the degree of ink reattachment to fiber. The payback for either application is attractive. Sparking induced deposition of contaminants in another mill, which is a positive development--if it can be controlled. The technique is also able to degas water and to oxidize odor-causing sulfur compounds. Although one unit has been purchased by a mill, second-order effects caused by the technology needs to be defined further before the technology can be broadly applied.

Institute of Paper Science Technology

2002-07-01T23:59:59.000Z

173

Thermal stabilization of uranium mill tailings  

SciTech Connect

The sintering of tailings at high temperatures (1200/sup 0/C) has shown promise as a conditioning approach that greatly reduces the /sup 222/Rn emanation of uranium mill tailings. The structure of thermally stabilized tailings has been appreciably altered producing a material that will have minimal management requirements and will be applicable to on-site processing and disposal. The mineralogy of untreated tailings is presented to define the structure of the original materials. Quartz predominates in most tailings samples; however, appreciable quantities of gypsum, clay, illite, or albites are found in some tailings. Samples from the Durango and Shiprock sites have plagioclase-type aluminosilicates and non-aluminum silicates as major components. The iron-rich vanadium tailings from the Salt Lake City site contain appreciable quantities of ..cap alpha..-hematite and chloroapatite. The reduction in radon emanation power and changes in mineralogy as a function of sintering temperature (500 to 1200(NiAsS) are considered possible species for consideraed. The calculated activity data of the various carbonate, sulfate and hydroxide species in the Li/sup +/Na/sup +/K/sup +//CO/sub 3/ = SO/sub 4/ = OH/sup -/ system have been combined f liquidus surfaces, and estimated error limits are given for each system. A comng payback period, but as the initial cost of the SAHPS is reduced and fuel prices increase, the payback period of a SAHPS will be shorter and could be competitive with other conventional heating/cooling systems.

Dreesen, D.R.; Williams, J.M.; Cokal, E.J.

1981-01-01T23:59:59.000Z

174

Direct measures of mechanical energy for knife mill size reduction  

Science Conference Proceedings (OSTI)

Lengthy straw/stalk of biomass may not be directly fed into grinders such as hammer mills and disc refiners. Hence, biomass needs to be preprocessed using coarse grinders like a knife mill to allow for efficient feeding in refiner mills without bridging and choking. Size reduction mechanical energy was directly measured for switchgrass (Panicum virgatum L.), wheat straw (Triticum aestivum L.), and corn stover (Zea mays L.) in an instrumented knife mill. Direct power inputs were determined for different knife mill screen openings from 12.7 to 50.8 mm, rotor speeds between 250 and 500 rpm, and mass feed rates from 1 to 11 kg/min. Overall accuracy of power measurement was calculated to be 0.003 kW. Total specific energy (kWh/Mg) was defined as size reduction energy to operate mill with biomass. Effective specific energy was defined as the energy that can be assumed to reach the biomass. The difference is parasitic or no-load energy of mill. Total specific energy for switchgrass, wheat straw, and corn stover chopping increased with knife mill speed, whereas, effective specific energy decreased marginally for switchgrass and increased for wheat straw and corn stover. Total and effective specific energy decreased with an increase in screen size for all the crops studied. Total specific energy decreased with increase in mass feed rate, but effective specific energy increased for switchgrass and wheat straw, and decreased for corn stover at increased feed rate. For knife mill screen size of 25.4 mm and optimum speed of 250 rpm, optimum feed rates were 7.6, 5.8, and 4.5 kg/min for switchgrass, wheat straw, and corn stover, respectively, and the corresponding total specific energies were 7.57, 10.53, and 8.87 kWh/Mg and effective specific energies were 1.27, 1.50, and 0.24 kWh/Mg for switchgrass, wheat straw, and corn stover, respectively. Energy utilization ratios were calculated as 16.8%, 14.3%, and 2.8% for switchgrass, wheat straw, and corn stover, respectively. These data will be useful for preparing the feed material for subsequent fine grinding operations and designing new mills.

Bitra, V.S.P. [University of Tennessee; Womac, A.R. [University of Tennessee; Igathinathane, C. [Mississippi State University (MSU); Miu, P.I [University of Tennessee; Yang, Y.T. [University of Tennessee; Smith, D.R. [University of Tennessee; Chevanan, Nehru [University of Tennessee; Sokhansanj, Shahabaddine [ORNL

2009-08-01T23:59:59.000Z

175

Measuring the effects of low energy ion milling on the magnetization of Co/Pd multilayers using scanning electron microscopy with polarization analysis  

E-Print Network (OSTI)

effects of low energy ion milling on the magnetization ofchange caused by the milling. In conclusion, we demonstratednm?, on the energy of ion milling is investigated using

2010-01-01T23:59:59.000Z

176

Plasma Cupola Processing of Mill Scale: CMP Report No. 90-11  

Science Conference Proceedings (OSTI)

The objective of Phase A of the Metallurgical Waste Treatment Program was to examine the iron recovery potential from processing mill scale with the plasma-fired cupola. Four scoping tests were performed examining different mill scale feed methods; mill scale fed through the cupola top, mill scale fed through the cupola top in briquette form and mill scale fed through the cupola tuyere with and without carbon. The test results indicate that at feed levels of 20 percent mill scale, high iron oxide yields ...

1991-06-30T23:59:59.000Z

177

Topologically Massive Yang-Mills Theory and Link Invariants  

E-Print Network (OSTI)

Topologically massive Yang-Mills theory is studied in the framework of geometric quantization. This theory has a mass gap that is proportional to the topological mass m. Due to the existence of this mass gap, Yang-Mills contribution dies at very large distances compared to 1/m, leaving a pure Chern-Simons theory with level number k. In this paper, an intermediate region is studied where the distance is large enough, so the theory is almost topological, but not infinitely large, so there is still a small contribution from Yang-Mills. It is shown that, this almost topological theory consists of two copies of Chern-Simons, each with level number k/2. As m approaches infinity, they add up to give the original Chern-Simons term with level k. Also, reduction of the phase space is discussed in this limit. Then finally, a relation between the observables of topologically massive Yang-Mills theory and Chern-Simons theory is shown. This allows one to use skein relations to calculate topologically massive Yang-Mills theory observables at large but finite distances.

Tuna Yildirim

2013-11-08T23:59:59.000Z

178

Grinding media oscillation: effect on torsional vibrations in tumble mills  

E-Print Network (OSTI)

Tumble mills are hollow cylindrical shells of large diameter carrying grinding media (a combination of rock/iron ore/chemical flakes and metal balls/rods), which, upon rotation of the mill, will be ground into fine powder. These mills rotate at low speeds using a gear reduction unit and often have vibration problems. These vibration problems result in increased gear wear and occasional catastrophic failures resulting in production loss. The objective of this research is to investigate the effect of oscillation of grinding media on torsional vibrations of the mill. A theoretical model was developed to determine the oscillating frequency of the grinding media. A 12" (0.3 m) diameter tumble mill test rig was built with a 0.5 hp DC motor. The rig is tested with sand and iron bb balls to simulate the industry process application. At low volume levels the grinding media oscillates like a rigid body as compared to higher volumes. It is shown that tumbling action of grinding media causes torsional excitation and hence its effect has to be considered in torsional vibration analysis. At starting, the load on the gears is much higher due to this oscillation.

Toram, Kiran Kumar

2005-08-01T23:59:59.000Z

179

High School Students Engage EM Program, Teach Classmates about Nuclear  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

High School Students Engage EM Program, Teach Classmates about High School Students Engage EM Program, Teach Classmates about Nuclear Cleanup High School Students Engage EM Program, Teach Classmates about Nuclear Cleanup May 22, 2012 - 12:00pm Addthis NSSAB student liaisons Gumabon, left, and Leavitt discuss their project involving a student survey and educational tool to members of the NSSAB. NSSAB student liaisons Gumabon, left, and Leavitt discuss their project involving a student survey and educational tool to members of the NSSAB. McMaster, left, and Sakalla were presented plaques by Dave Adler, DOE-EM liason to ORSSAB, in recognition for their service to ORSSAB. McMaster, left, and Sakalla were presented plaques by Dave Adler, DOE-EM liason to ORSSAB, in recognition for their service to ORSSAB. NSSAB student liaisons Gumabon, left, and Leavitt discuss their project involving a student survey and educational tool to members of the NSSAB.

180

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE APPROVAL REQUIRED WHEN EMPLOYEES ENGAGE IN OUTSIDE EMPLOYMENT Pursuant to 5 C.F.R. §§ 2635.803 and 3301.103 (a), all Department of Energy employees, other than special Government employees, must obtain prior written approval from their immediate supervisor and an ethics counselor before engaging in outside employment regardless of whether the employee is compensated for the activity. A special Government employee is an employee serving not more than 130 days in any consecutive 365 day period. Each request for approval must include the name of the employee seeking approval, the group or organization for whom the employee seeks to work, the type of work to be performed, and the proposed dates of employment and hours to be worked. These regulations have been in place for several years.

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Stakeholder Engagement and Outreach: Subscribe to News and Events  

Wind Powering America (EERE)

Subscribe to News and Events Subscribe to News and Events Follow news from the Stakeholder Engagement and Outreach initiative by subscribing to its newsletter, or following its news and events RSS feeds. Newsletter The Stakeholder Engagement and Outreach Newsletter informs partners and stakeholders every other week of events and webinars, financial opportunities, new publications, state successes, and other program activities. Enter your e-mail address below to begin the registration process. After you subscribe to the Stakeholder Engagement and Outreach Newsletter, you can choose to subscribe to other energy efficiency and renewable energy news. Archived copies are not available, but all of the news items can be found on this website under news, events, and publications. Enter your email address:

182

The Effect of Kinematical Parameters and Tool Geometry on Burr Height in Face Milling of Al-Si Alloys  

E-Print Network (OSTI)

Burr Formation in Face Milling”, Bulletin Japan Society ofHeight and Thickness in Face Milling Operation”, ASME J. ofRoughness in High Speed Face Milling”, 2001-2002 LMA Annual

Avila, Miguel C.; Dornfeld, David A

2003-01-01T23:59:59.000Z

183

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

184

Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Cleanup Project Steps into Spotlight at Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna Moab Uranium Mill Tailings Cleanup Project Steps into Spotlight at International Meeting in Vienna October 22, 2012 - 12:00pm Addthis Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler Moab Federal Project Director Donald Metzler presents at the Uranium Mining Remediation Exchange Group meeting in Germany in September 2011. Moab Federal Project Director Donald Metzler

185

West Coast Paper Mills Ltd WCPML | Open Energy Information  

Open Energy Info (EERE)

Mills Ltd WCPML Mills Ltd WCPML Jump to: navigation, search Name West Coast Paper Mills Ltd. (WCPML) Place Dandeli, Karnataka, India Zip 581 325 Sector Biomass Product Dandeli based biomass project developers. Coordinates 15.25272°, 74.626404° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":15.25272,"lon":74.626404,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

186

City of Lake Mills, Iowa (Utility Company) | Open Energy Information  

Open Energy Info (EERE)

Mills Mills Place Iowa Utility Id 10606 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Operates Generating Plant Yes Activity Distribution Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Commercial Commercial Commercial All Electric Commercial Industrial Electric Rate Industrial Residential Residential Average Rates Residential: $0.0988/kWh Commercial: $0.0948/kWh Industrial: $0.0786/kWh References ↑ "EIA Form EIA-861 Final Data File for 2010 - File1_a" Retrieved from "http://en.openei.org/w/index.php?title=City_of_Lake_Mills,_Iowa_(Utility_Company)&oldid=409818

187

DOE - Office of Legacy Management -- Loma Mill - CO 03  

Office of Legacy Management (LM)

Loma Mill - CO 03 Loma Mill - CO 03 FUSRAP Considered Sites Site: Loma Mill (CO.03 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 77 FUSRAP considered sites for which few, if any records are available in their respective site files to provide an historical account of past operations and their relationship, if any, with MED/AEC operations. Reviews of contact lists, accountable station lists, health and safety records and other documentation of the period do not provide sufficient information to warrant further search of historical records for information on these sites. These site files remain "open" to

188

Mill Run Wind Power Project | Open Energy Information  

Open Energy Info (EERE)

Wind Power Project Wind Power Project Jump to: navigation, search Name Mill Run Wind Power Project Facility Mill Run Wind Power Project Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources Developer Atlantic Renewable Energy Energy Purchaser Exelon Location Mill Run PA Coordinates 39.921026°, -79.388666° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.921026,"lon":-79.388666,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

189

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste Biomass Burner Cogenerates Jobs and Electricity from Lumber Mill Waste December 6, 2011 - 3:57pm Addthis Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of Washington DNR. Dale and Sharon Borgford, small business owners in Stevens County, WA, break ground with Peter Goldmark, Washington State Commissioner of Public Lands. The pair brought more than 75 jobs to the area with help from DOE's State Energy Program and the U.S. Forest Service. | Photo courtesy of

190

Stakeholder Engagement and Outreach: Native American Anemometer Loan  

Wind Powering America (EERE)

Anemometer Loan Program Anemometer Loan Program Photo of an anemometer, before it is raised, in Bay Mills, Michigan. Photo of an anemometer, before it is raised, in Bay Mills, Michigan Here you will find anemometer loan applications for tribes. Wind Powering America's Native American anemometer loan program is part of an effort to promote the installation of wind turbines on Native American lands. Wind Powering America's program allows Native American tribes to borrow anemometers and the equipment needed for installation so that they may measure the wind resource on tribal lands. By significantly reducing the cost of quantifying the wind resource on tribal lands, Wind Powering America expects that more tribes will be encouraged to install wind turbines. The anemometer loan program is administered jointly by the

191

Mills, Dams, and Reservoirs (Massachusetts) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

You are here You are here Home » Mills, Dams, and Reservoirs (Massachusetts) Mills, Dams, and Reservoirs (Massachusetts) < Back Eligibility Agricultural Commercial Construction Fed. Government Fuel Distributor General Public/Consumer Industrial Installer/Contractor Institutional Investor-Owned Utility Local Government Low-Income Residential Multi-Family Residential Municipal/Public Utility Nonprofit Residential Retail Supplier Rural Electric Cooperative Schools State/Provincial Govt Systems Integrator Transportation Tribal Government Utility Savings Category Water Buying & Making Electricity Home Weatherization Program Info State Massachusetts Program Type Siting and Permitting Provider Department of Conservation and Recreation This chapter of the Massachusetts General Laws outlines procedures to

192

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

193

Advanced Modeling and Materials in Kraft Pulp Mills  

DOE Green Energy (OSTI)

This CRADA provided technical support to the Weyerhaeuser Company on a number of issues related to the performance and/or selection of materials at a number of locations in a pulp and paper mill. The studies related primarily to components for black liquor recovery boilers, but some effort was directed toward black liquor gasifiers and rolls for paper machines. The purpose of this CRADA was to assist Weyerhaeuser in the evaluation of materials exposed in various paper mill environments and to provide direction in the selection of alternate materials, when appropriate.

Keiser, J.R.; Gorog, J.P.

2002-05-15T23:59:59.000Z

194

Hochschild and cyclic homology of Yang-Mills algebras.  

E-Print Network (OSTI)

The aim of this article is to compute the Hochschild and cyclic homology groups of Yang-Mills algebras, that have been defined by A. Connes and M. Dubois-Violette. We proceed here the study of these algebras that we have initiated in a previous article. The computation involves the use of a spectral sequence associated to the natural filtration on the enveloping algebra of the Lie Yang-Mills algebra. This filtration in provided by a Lie ideal which is free as Lie algebra.

Estanislao Herscovich; Andrea Solotar

195

Arbitrary surface flank milling of fan, compressor, and impeller blades  

SciTech Connect

It is generally conceived that a blade surface is flank millable if it can be closely approximated by a ruled surface; otherwise the slow machining process of point milling has to be employed. However, the authors have now demonstrated that the ruled surface criterion for flank milling is neither necessary nor sufficient. Furthermore, many complex arbitrary surfaces typical of the blades in fans, axial compressors, and centrifugal impellers in aviation gas turbines are actually closely flank millable and can be rendered exactly flank millable with one or more passes per surface often without sacrificing, indeed usually with gain, in performance.

Wu, C.Y. [Pratt and Whitney Canada Incorporated, Longueuil, Quebec, (Canada). Design Engineering

1995-07-01T23:59:59.000Z

196

Effect of Cryogenic Milling on the Properties of Fe-14Cr ODS Powder  

Science Conference Proceedings (OSTI)

Generally, ODS steel is produced by high energy ball milling process in order to ... The mixture of Fe and Y2O3 powder was ball milled for 10 hours at room ...

197

CoNiFe Alloy Powder Synthesis by High Energy Milling  

Science Conference Proceedings (OSTI)

CoNiFe alloy powder was synthesized by high energy milling of mixtures of Co, Ni and Fe powder as a bulk processing method for producing powder. A milling ...

198

Black Holes, q-Deformed 2d Yang-Mills, and Non-perturbative Topological Strings  

E-Print Network (OSTI)

Two-dimensional Yang-Mills, black holes and topologicalfor the two- dimensional black hole,” Nucl. Phys. B 622 (LBNL- 56688 Black Holes, q-Deformed 2d Yang-Mills, and Non-

Aganagic, Mina

2009-01-01T23:59:59.000Z

199

The Yang-Mills theory as a massless limit of a massive nonabelian gauge model  

E-Print Network (OSTI)

A gauge invariant infrared regularization of the Yang-Mills theory applicable beyond perturbation theory is constructed.

A. A. Slavnov

2012-12-13T23:59:59.000Z

200

Ada and grace: toward realistic and engaging virtual museum guides  

Science Conference Proceedings (OSTI)

To increase the interest and engagement of middle school students in science and technology, the InterFaces project has created virtual museum guides that are in use at the Museum of Science, Boston. The characters use natural language interaction and ... Keywords: STEM, informal science education, natural language interaction, photoreal characters, virtual human applications, virtual museum guides

William Swartout; David Traum; Ron Artstein; Dan Noren; Paul Debevec; Kerry Bronnenkant; Josh Williams; Anton Leuski; Shrikanth Narayanan; Diane Piepol; Chad Lane; Jacquelyn Morie; Priti Aggarwal; Matt Liewer; Jen-Yuan Chiang; Jillian Gerten; Selina Chu; Kyle White

2010-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Carbon Capture and Storage (CCS) and Community Engagement | Open Energy  

Open Energy Info (EERE)

Capture and Storage (CCS) and Community Engagement Capture and Storage (CCS) and Community Engagement Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Capture and Storage (CCS) and Community Engagement Focus Area: Clean Fossil Energy Topics: Best Practices Website: pdf.wri.org/ccs_and_community_engagement.pdf Equivalent URI: cleanenergysolutions.org/content/carbon-capture-and-storage-ccs-and-co Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Voluntary Industry Agreements Regulations: "Emissions Mitigation Scheme,Mandates/Targets" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

202

Using participatory design methods to engage the uninterested  

Science Conference Proceedings (OSTI)

Engaging young people on issues relating to mental health can be challenging. Although young people have their own health and wellbeing goals, their perception of these issues can be radically different to those of mental health professionals. The Inspire ... Keywords: co-design workshops, design-by-doing, mutual learning, participatory design

Mariesa Nicholas; Penny Hagen; Kitty Rahilly; Nathalie Swainston

2012-08-01T23:59:59.000Z

203

Estimating the Economic Benefits of Forward-Engaged Naval Forces  

Science Conference Proceedings (OSTI)

In preparing for the 1997 quadrennial defense review, US Navy leaders asked us if we could quantify the economic benefits of forward-engaged naval forces and communicate them to policy makers. Until this point, the only evidence of such benefits was ... Keywords: INDUSTRIES--PETROLEUM-NATURAL GAS, MILITARY--COST EFFECTIVENESS

Robert E. Looney; David A. Schrady; Ronald L. Brown

2001-07-01T23:59:59.000Z

204

The cube: a very large-scale interactive engagement space  

Science Conference Proceedings (OSTI)

"The Cube" is a unique facility that combines 48 large multi-touch screens and very large-scale projection surfaces to form one of the world's largest interactive learning and engagement spaces. The Cube facility is part of the Queensland University ... Keywords: interactive wall displays, multi-touch, very large displays

Markus Rittenbruch, Andrew Sorensen, Jared Donovan, Debra Polson, Michael Docherty, Jeff Jones

2013-10-01T23:59:59.000Z

205

Automatic visual guidance of a forklift engaging a pallet  

Science Conference Proceedings (OSTI)

This paper presents the development of a prototype vision-guided forklift system for the automatic engagement of pallets. The system is controlled using the visual guidance method of mobile camera-space manipulation, which is capable of achieving a high ... Keywords: Machine vision, Mobile manipulation, Visual guidance

Michael Seelinger; John-David Yoder

2006-12-01T23:59:59.000Z

206

Three dimensional modeling and finite element simulation of a generic end mill  

Science Conference Proceedings (OSTI)

The geometry of cutting flutes and the surfaces of end mills is one of the crucial parameters affecting the quality of the machining in the case of end milling. These are usually represented by two-dimensional models. This paper describes in detail the ... Keywords: End mill, Finite element analysis, Mapping, Surface modeling, Surface patches

Puneet Tandon; Md. Rajik Khan

2009-02-01T23:59:59.000Z

207

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS  

E-Print Network (OSTI)

BIOMASS AND BLACK LIQUOR GASIFIER/GAS TURBINE COGENERATION AT PULP AND PAPER MILLS ERIC D. LARSON Milano Milan, Italy ABSTRACT Cogeneration of heat and power at kraft pulp/paper mills from on-site bioma modeling of gasifier/gas turbine pulp-mill cogeneration systemsusing gasifier designs under commercial

208

Veeco Solar Equipment formerly Mill Lane Engineering | Open Energy  

Open Energy Info (EERE)

Veeco Solar Equipment formerly Mill Lane Engineering Veeco Solar Equipment formerly Mill Lane Engineering Jump to: navigation, search Name Veeco Solar Equipment (formerly Mill Lane Engineering) Place Lowell, Massachusetts Zip 1851 Sector Solar Product Mill Lane Engineering is a privately held Massachusetts corporation that designs, builds, and integrates custom solar equipment and flexible solar panel coating systems. Coordinates 43.33937°, -88.817939° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.33937,"lon":-88.817939,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

209

Horizon Properties of Einstein-Yang-Mills Black Hole  

E-Print Network (OSTI)

We consider static axially symmetric Einstein-Yang-Mills black holes in the isolated horizon formalism. The mass of these hairy black holes is related to the mass of the corresponding particle-like solutions by the horizon mass. The hairy black holes violate the ``quasi-local uniqueness conjecture'', based on the horizon charges.

B. Kleihaus; J. Kunz; A. Sood; M. Wirschins

2001-10-19T23:59:59.000Z

210

Boise Inc. St. Helens Paper Mill Achieves Significant Fuel Savings  

SciTech Connect

This case study describes how the Boise Inc. paper mill in St. Helens, Oregon, achieved annual savings of approximately 154,000 MMBtu and more than $1 million after receiving a DOE Save Energy Now energy assessment and implementing recommendations to improve the efficiency of its steam system.

Not Available

2008-05-01T23:59:59.000Z

211

Uranium Mill Tailings Remedial Action (UMTRA) Project. [UMTRA project  

SciTech Connect

The mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project is explicitly stated and directed in the Uranium Mill Tailings Radiation Control Act of 1978, hereinafter referred to as the Act.'' Title I of the Act authorizes the Department of Energy (DOE) to undertake remedial action at designated inactive uranium processing sites (Attachment 1 and 2) and associated vicinity properties containing uranium mill tailings and other residual radioactive materials derived from the processing site. The purpose of the remedial actions is to stabilize and control such uranium mill tailings and other residual radioactive materials in a safe and environmentally sound manner to minimize radiation health hazards to the public. The principal health hazards and environmental concerns are: the inhalation of air particulates contaminated as a result of the emanation of radon from the tailings piles and the subsequent decay of radon daughters; and the contamination of surface and groundwaters with radionuclides or other chemically toxic materials. This UMTRA Project Plan identifies the mission and objectives of the project, outlines the technical and managerial approach for achieving them, and summarizes the performance, cost, and schedule baselines which have been established to guide operational activity. Estimated cost increases by 15 percent, or if the schedule slips by six months. 4 refs.

Not Available

1989-09-01T23:59:59.000Z

212

Non-Abelian strings in supersymmetric Yang-Mills  

Science Conference Proceedings (OSTI)

I give a broad review of novel phenomena discovered in certain Yang-Mills theories: non-Abelian strings and confined monopoles. Then I explain how these phenomena allow one to study strong dynamics of gauge theories in four dimensions from two-dimensional models emerging on the string world sheet.

Shifman, M. [William I. Fine Theoretical Physics Institute, University of Minnesota, Minneapolis, MN 55455 (United States)

2012-09-26T23:59:59.000Z

213

The Whewell-Mill Debate in a Nutshell  

E-Print Network (OSTI)

agrees with Mill’s definition as far as it goes. Is Whewell therefore assenting to the standard concept of induction, which talks of inferring a generalization of the form “All As are Bs ” from the premise that “All observed As are Bs”? Does Whewell agree, to use Mill’s example, that inferring “All humans are mortal ” from the premise that “John, Peter and Paul, etc., are mortal ” is an example of induction? The surprising answer is “no”. How can this be? Our reading of Whewell is that he has an entirely different understanding of the term “general”. For Whewell, the proposition “All As are Bs ” is not general if it is a mere juxtaposition of particular cases (see Butts, ed., 1989, p. 163). Rather, for Whewell it is necessary that (Butts, ed., 1989, p. 47) “In each inductive process, there is some general idea introduced, which is given, not by the phenomena, but by the mind. ” The proposition is constituted of facts and conceptions which are, “bound together so as to give rise to those general propositions of which science consists ” (ref--see MR). For Whewell “All humans are mortal ” is not general in the appropriate sense because there has been no conception added. Whewell insists that in every genuine induction, “The

What John; Stuart Mill

2006-01-01T23:59:59.000Z

214

5-Axis Freeform Surface Milling using Piecewise Ruled Surface Approximation  

E-Print Network (OSTI)

This paper presents a 5-axis side milling scheme for freeform surfaces based on automatic piecewise ruled surface approximation. With this scheme, resulting surface finish is accurate and pleasing, and has a smaller scallop height compared to ball-end milling. The ruled surface approximation can be made arbitrarily precise resulting in an overall fast milling operation that satisfies tight tolerances, and smoother surface finish. The class of surfaces that can take advantage of this type of 5-axis milling operation includes both convex and saddle-like (hyperbolic) shapes. 1 Introduction The automatic toolpath generation for manufacturing of models consisting of freeform surfaces is a difficult problem addressed by numerous researchers [Bob85, Choi89, Choi93, Chou89, Elb93, Elb94, Fers86, Jera91, Lone87, Sait91, Spen90, Zhan86]. 3-axis machining [Bob85, Choi89, Fers86, Jera91, Lone87, Sait91, Spen90, Zhan86] is more frequently used than 4- or 5-axis machining modes. While deri...

Gershon Elber; Russ Fish

2000-01-01T23:59:59.000Z

215

Market Mill Dependence Pattern in the Stock Market: Multiscale Conditional Dynamics  

E-Print Network (OSTI)

Market Mill is a complex dependence pattern leading to nonlinear correlations and predictability in intraday dynamics of stock prices. The present paper puts together previous efforts to build a dynamical model reflecting the market mill asymmetries. We show that certain properties of the conditional dynamics at a single time scale result in the "elementary" market mill pattern. We discuss these properties as a mixture of trend-preserving and contrarian strategies used by market agents. Multiple time scale considerations make the resulting "composite" mill similar to the empirical market mill patterns. Multiscale model also reflects a multi-agent nature of the market.

Zaitsev, Sergey; Leonidov, Andrei; Trainin, Vladimir

2008-01-01T23:59:59.000Z

216

Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd | Open Energy  

Open Energy Info (EERE)

Jingye Bearing Manufacture for Rolling Mills Co Ltd Jingye Bearing Manufacture for Rolling Mills Co Ltd Jump to: navigation, search Name Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd Place Beijing Municipality, China Sector Wind energy Product Beijing-based wind turbine bearing maker. References Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd is a company located in Beijing Municipality, China . References ↑ "Beijing Jingye Bearing Manufacture for Rolling Mills Co Ltd" Retrieved from "http://en.openei.org/w/index.php?title=Beijing_Jingye_Bearing_Manufacture_for_Rolling_Mills_Co_Ltd&oldid=342621

217

Abstract--Face Milling is today the most effective and productive manufacturing method for roughing and finishing large  

E-Print Network (OSTI)

Surface Roughness in Cnc Face Milling of Cobalt-Based Alloy (Stellite 6)", The International Journal

Aristomenis, Antoniadis

218

Optimizing Consumer Utility Systems to Drive Engagement and Action  

NLE Websites -- All DOE Office Websites (Extended Search)

Optimizing Consumer Utility Systems to Drive Engagement and Action Optimizing Consumer Utility Systems to Drive Engagement and Action Speaker(s): Stephen Malloy V. Rory Jones Date: November 15, 2012 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Christopher Payne This presentation reviews a new software tool that recommends specific actions for homeowners and others to undertake to optimize their utility system configuration and operation. The tool, the "Utility System Optimizer" (USO), may be configured to optimize across all utilities (electricity, gas, water - and other fuels as propane, oil and wood) to meet objectives that are defined by the owner/operator (homeowner, retailer, etc.). Such objectives may be to maximize net wealth over time, to minimize carbon footprint for the best economics, to maximize health

219

NREL: Technology Deployment - FEMA Engages NREL in Hurricane Sandy Recovery  

NLE Websites -- All DOE Office Websites (Extended Search)

FEMA Engages NREL in Hurricane Sandy Recovery Effort FEMA Engages NREL in Hurricane Sandy Recovery Effort May 8, 2013 Natural Disasters, By the Numbers There have been 144 weather/climate disasters since 1980 in which overall damages reached or exceeded $1 billion. In 2005, the estimated economic loss due to Hurricane Katrina was about $187 billion. In 2012, the estimated total loss due to Hurricane Sandy was $71 billion in New York and New Jersey alone. By the time Hurricane Sandy pounded the East Coast on October 29, 2012, it had grown to be the largest Atlantic hurricane on record-with winds spanning 1,100 miles. The devastation left in its wake affected 24 states with the most severe damage concentrated in New Jersey and New York; total damage topped an estimated $71 billion for the two states alone. For the first time, NREL was funded by the Federal Emergency Management

220

Gang Mills, New York: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Gang Mills, New York: Energy Resources Gang Mills, New York: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 42.1461852°, -77.1116375° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.1461852,"lon":-77.1116375,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Roger Mills County, Oklahoma: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Roger Mills County, Oklahoma: Energy Resources Roger Mills County, Oklahoma: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.616176°, -99.634135° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.616176,"lon":-99.634135,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

222

Wind Resource Assessment Report: Mille Lacs Indian Reservation, Minnesota  

DOE Green Energy (OSTI)

The U.S. Environmental Protection Agency (EPA) launched the RE-Powering America's Land initiative to encourage development of renewable energy on potentially contaminated land and mine sites. EPA collaborated with the U.S. Department of Energy's (DOE's) National Renewable Energy Laboratory (NREL) and the Mille Lacs Band of Chippewa Indians to evaluate the wind resource and examine the feasibility of a wind project at a contaminated site located on the Mille Lacs Indian Reservation in Minnesota. The wind monitoring effort involved the installation of a 60-m met tower and the collection of 18 months of wind data at multiple heights above the ground. This report focuses on the wind resource assessment, the estimated energy production of wind turbines, and an assessment of the economic feasibility of a potential wind project sited this site.

Jimenez, A. C.

2013-12-01T23:59:59.000Z

223

Anderson Mill, Texas: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Anderson Mill, Texas: Energy Resources Anderson Mill, Texas: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 30.4549224°, -97.8058432° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":30.4549224,"lon":-97.8058432,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

224

Kemp Mill, Maryland: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Kemp Mill, Maryland: Energy Resources Kemp Mill, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.0389982°, -77.0191436° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0389982,"lon":-77.0191436,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

225

Mills County, Iowa: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mills County, Iowa: Energy Resources Mills County, Iowa: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 41.0624496°, -95.6457951° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.0624496,"lon":-95.6457951,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

226

Mille Lacs County, Minnesota: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mille Lacs County, Minnesota: Energy Resources Mille Lacs County, Minnesota: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.9228403°, -93.6218744° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.9228403,"lon":-93.6218744,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

227

DOE/EA-1155 Uranium Mill Tailing Remedial Action Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

55 55 Uranium Mill Tailing Remedial Action Project Environmental Assessment of Ground- Water Compliance Activities At the Uranium Mill Tailings Site Spook, Wyoming February 1997 Prepared by U.S. Department of Energy Albuquerque Operations Office Grand Junction Office This page intentionally blank : illegible Portions of tbis DISCLAIMER document may be in electronic image products. Images are produced fiom the best available original dOClMXlf?IlL DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warranty, express or implied, or assumes any legal liabili- ty or responsibility for the accuracy, completeness,

228

Cedar Mill, Oregon: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

Mill, Oregon: Energy Resources Mill, Oregon: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 45.5048397°, -122.7984325° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.5048397,"lon":-122.7984325,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

229

May 11, 2011 - Engaging Small Business Program Participants Webinar (text version)  

NLE Websites -- All DOE Office Websites (Extended Search)

1, 2011 - Engaging Small Business Program 1, 2011 - Engaging Small Business Program Participants Webinar (text version) Below is the text version of the Webinar titled "Engaging Small Business Program Participants," originally presented on May 11, 2011. (Please note: portions of the transcript below may be incomplete where indicated with an underlined placeholder space. Please refer to the webinar presentation recording and presentation slides for

230

Uranium Mill Tailings Remedial Action Project (UMTRAP) Public Participation Plan  

SciTech Connect

The purpose of this Public Participation Plan is to explain the Department of Energy`s plan for involving the public in the decision-making process related to the Uranium Mill Tailings Remedial Action (UMTRA) Project. This project was authorized by Congress in the Uranium Mill Tailings Radiation Control Act of 1978. The Act provides for a cooperative effort with affected states and Indian tribes for the eventual cleanup of abandoned or inactive uranium mill tailings sites, which are located in nine western states and in Pennsylvania. Section 111 of the Act states, ``in carrying out the provisions of this title, including the designation of processing sites, establishing priorities for such sites, the selection of remedial actions and the execution of cooperative agreements, the Secretary (of Energy), the Administrator (of the Environmental Protection Agency), and the (Nuclear Regulatory) Commission shall encourage public participation and, where appropriate, the Secretary shall hold public hearings relative to such matters in the States where processing sites and disposal sites are located.`` The objective of this document is to show when, where, and how the public will be involved in this project.

NONE

1981-05-01T23:59:59.000Z

231

Christian veneer dryer: Forest products fact sheet  

SciTech Connect

Fact sheet written for the Inventions and Innovation Program about a new closed rotary drum dryer for the forest products industry.

NREL

1999-12-14T23:59:59.000Z

232

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

233

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE CLEANING UP MILL TAILINGS AND GROUND WATER AT THE MOAB UMTRA PROJECT SITE August 2, 2010 - 12:00pm Addthis A sheep’s foot roller compacts the tailings in the disposal cell. A sheep's foot roller compacts the tailings in the disposal cell. Moab, UT MILL TAILINGS REMOVAL Sixteen million tons of uranium mill tailings 80 feet high stood on the banks of the Colorado River near Moab in southeast Utah, as a legacy to the former ore-processing site that operated for nearly three decades beginning in the mid-1950s. That is until April 2009, when the U.S. Department of Energy began moving the tailings by rail to an engineered disposal cell constructed 30 miles north near Crescent Junction, Utah. The mill tailings,

234

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

235

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site 6 Million Tons of Mill Tailings Removed From DOE Moab Project Site June 18, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager (970) 257-2145 (Grand Junction, CO) - Today, the Department of Energy (DOE) announced that 6 million tons of uranium mill tailings have been shipped from Moab, Utah, under the Uranium Mill Tailings Remedial Action Project to an engineered disposal cell near Crescent Junction, Utah. The shipments mark continued progress toward relocating the 16-million-ton uranium mill tailings pile away from the Colorado River. "The federal budget continues to be stretched thin, and I am proud this

236

DOE - Office of Legacy Management -- Tuba City Mill Site - AZ 0-02  

Office of Legacy Management (LM)

Mill Site - AZ 0-02 Mill Site - AZ 0-02 FUSRAP Considered Sites Site: Tuba City Mill Site (AZ.0-02 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Tuba City, Arizona, Disposal Site Documents Related to Tuba City Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Tuba City, Arizona, Disposal Site. LMS/S09461. February 2013 2008 UMTRCA Title I Annual Report January 2009 Tuba City, Arizona February 2009 Groundwater and Surface Water Sampling at the Tuba City, Arizona Disposal Site May 2009 This fact sheet provides information about the Uranium Mill Tailings

237

EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: Ground-water Compliance Activities at the Uranium Mill 5: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming EA-1155: Ground-water Compliance Activities at the Uranium Mill Tailings Site, Spook, Wyoming SUMMARY This EA evaluates the environmental impacts for the proposal to comply with the Environmental Protection Agency's ground-water standards set forth in 40 CFR 192 at the Spook, Wyoming Uranium Mill Tailings Site by using the selected alternative stated in the Final Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water Project. PUBLIC COMMENT OPPORTUNITIES None available at this time. DOCUMENTS AVAILABLE FOR DOWNLOAD March 1, 1997 EA-1155: Final Environmental Assessment Ground-water Compliance Activities at the Uranium Mill Tailings Site,

238

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpassing that goal. Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds More Documents & Publications EIS-0355: Record of Decision EIS-0355: Draft Environmental Impact Statement EIS-0355: Final Environmental Impact Statement

239

Bioenergy Pumps New Life into Pulp and Paper Mills | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills Bioenergy Pumps New Life into Pulp and Paper Mills December 13, 2011 - 4:12pm Addthis Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Old Town Fuel and Fiber, a former pulp mill, converts a portion of the wood chips used to make pulp to biofuels. | Energy Department photo. Neil Rossmeissl General Engineer What does this project do? Breathes new life into shuttered factories and mills. Saves and creates jobs. Despite Americans' voracious appetite for paper products -- a staggering 700 pounds per person annually -- America's pulp and paper industry has been struggling as of late due to competition from countries where

240

July 28, 2010, Guiding semiconductor research through collaborative engagement  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The SRC ... The SRC ... Guiding semiconductor research through collaborative engagement Elizabeth J. Weitzman Exec. VP, SRC Exec. Director, Focus Center Research Program Semiconductor Research Corporation 2 ... Awarded Nat'l Medal of Technology Presidential Citation: "For building the world's largest and most successful university research force to support the ... semiconductor industry; For proving the concept of collaborative research as the first high-tech research consortium; and For creating the concept and methodology that evolved into the International Technology Roadmap for Semiconductors." 3 Key Attributes of SRC Research Entities 1. Accepted IP model. SRC's model has been

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Stakeholder Engagement and Outreach: About Wind Powering America  

Wind Powering America (EERE)

About About Printable Version Bookmark and Share Awards Contacts About the Stakeholder Engagement and Outreach Initiative This initiative is focused at advancing the appropriate deployment of wind energy systems while educating communities about the potential impacts of wind development, through supporting projects and activities: Delivering unbiased, relevant, and actionable information to policy and permitting processes, Expanding or preserving access to quality wind resources, Making decisions on wind deployment more certain and predictable for all stakeholders by reducing uncertainty around wind deployment related issues, Developing and providing tools to help communities understand the impact and benefits of potential wind development, and Supporting the development of a national wind workforce though the

242

Low energy milling method, low crystallinity alloy, and negative electrode composition  

DOE Patents (OSTI)

A method of making nanostructured alloy particles includes milling a millbase in a pebble mill containing milling media. The millbase comprises: (i) silicon, and (ii) at least one of carbon or a transition metal, and wherein the nanostructured alloy particles are substantially free of crystalline domains greater than 50 nanometers in size. A method of making a negative electrode composition for a lithium ion battery including the nanostructured alloy particles is also disclosed.

Le, Dihn B; Obrovac, Mark N; Kube, Robert Y; Landucci, James R

2012-10-16T23:59:59.000Z

243

Minimizing Process Energy Use for a Large TMP Mill With Pinch Technology  

Science Conference Proceedings (OSTI)

American Process Inc. conducted an energy targeting scoping study for a large thermomechanical pulping (TMP) mill, using Pinch analysis. The mill produces bleached, unbleached, and semibleached kraft market pulp and standard and offset newsprint. Operations are supported by steam raised in the recovery boiler and in the power boilers. Oil and hog fuels are used in the power boilers. Some power is generated on site and also purchased. The study concentrated on identifying the steps necessary for the mill ...

2000-10-31T23:59:59.000Z

244

Diffraction Analysis of Ball Milled Platinum Based Powders (Pt-ZrO2)  

Science Conference Proceedings (OSTI)

... series of powder samples with different amount of ZrO2 and ball milling time were examined by the synchrotron radiation at Brookhaven National Laboratory.

245

Pretreatment of Pulp Mill Wastewater Treatment Residues to Improve Their Anaerobic Digestion.  

E-Print Network (OSTI)

??Anaerobic digestion of excess biological wastewater treatment sludge (WAS) from pulp mills has the potential to reduce disposal costs and to generate energy through biogas… (more)

Wood, Nicholas

2009-01-01T23:59:59.000Z

246

Phase evolution in carbide dispersion strengthened nanostructured copper composite by high energy ball milling  

Science Conference Proceedings (OSTI)

In this study, high-energy ball milling was applied to synthesis in situ nanostructured copper based composite reinforced with metal carbides. Cu, M (M=W or Ti) and graphite powder mixture were mechanically alloyed for various milling time in a planetary ball mill with composition of Cu-20vol%WC and Cu-20vol%TiC. Then the as-milled powder were compacted at 200 to 400 MPa and sintered in a vacuum furnace at 900 Degree-Sign C. The results of X-ray diffraction, scanning electron microscopy and energy dispersive spectroscopy analysis showed that formation of tungsten carbides (W{sub 2}C and WC phases) was observed after sintering of Cu-W-C mixture while TiC precipitated in as-milled powder of Cu-Ti-C composite after 5 h and become amorphous with longer milling. Mechanism of MA explained the cold welding and fracturing event during milling. Cu-W-C system shows fracturing event is more dominant at early stage of milling and W particle still existed after milling up to 60 h. While in Cu-Ti-C system, cold welding is more dominant and all Ti particles dissolved into Cu matrix.

Hussain, Zuhailawati; Nur Hawadah, M. S. [School of Materials and Mineral Resources Engineering, Engineering Campus, Universiti Sains Malaysia, 14300 Nibong Tebal, Penang (Malaysia)

2012-09-06T23:59:59.000Z

247

Analysing the potential for steam savings in TMP mills using the HLMPP tool.  

E-Print Network (OSTI)

??Thermo mechanical pulp (TMP) mills are large consumers of both steam and electricity. Large energy savings can be achieved through investments in thermal process integration… (more)

Michel, Grègory

2010-01-01T23:59:59.000Z

248

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Cutting Condition on Power Consumption of Machine Tools, in:Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine tools

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

249

Synthesis of Ti/TiC Composites by Mechanical Milling Followed by ...  

Science Conference Proceedings (OSTI)

carbon nanotubes were subjected to high energy ball milling followed by spark plasma sintering (SPS) to synthesize Ti composite reinforced with in-situ formed ...

250

Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use  

E-Print Network (OSTI)

Energy Consumption Characterization and Reduction Strategiesand reducing the energy consumption of milling machine toolsGreen Machine Tools; Energy Consumption Reduction; Specific

Diaz, Nancy; E. Redelsheimer; Dornfeld, David

2011-01-01T23:59:59.000Z

251

Sweet-Talking the Climate? Evaluating Sugar Mill Cogeneration and Climate Change Financing in India  

E-Print Network (OSTI)

and  the  high  price  of  biomass, paper mills are paying only as long as the price of biomass remains  high.    A 

Ranganathan, Malini; Haya, Barbara; Kirpekar, Sujit

2005-01-01T23:59:59.000Z

252

Developing a generic hazard analysis critical control point (HACCP) system for the wheat milling industry.  

E-Print Network (OSTI)

??In South Africa there is a need within the milling industry for controlling food safety especially due to customer's demands and government's regulations. The best… (more)

Gillion, Lauren

2005-01-01T23:59:59.000Z

253

Damaged starch in the flour mill: how to reduce the electricity bill.  

E-Print Network (OSTI)

??The purpose of the research reported in the thesis, here, is to quantify new value added possible in flour milling with the use of the… (more)

Loubersac Dhotel, Charles

2012-01-01T23:59:59.000Z

254

Investigation and design of wet-mill equipment and process technology.  

E-Print Network (OSTI)

??need to dry-mill the wheat into flour, and as a result, the total cost of conversion from wheat to bread is reduced. The resulting product… (more)

Smith, Lisa Noelle.

2003-01-01T23:59:59.000Z

255

Changing patterns of flour-milling in the South Island, 1840-1973.  

E-Print Network (OSTI)

??Soon after the first permanent colonists came to the South Island the first flour-mills were established to produce flour for the needs of the population.… (more)

Wright, Murray John

1973-01-01T23:59:59.000Z

256

Benefits of flour storage as related to process efficiencies in milling.  

E-Print Network (OSTI)

??The milling of wheat into white flour is a high volume, low margin business. Flour is a commodity. Competition is fierce. Over the past several… (more)

Johnson, Brent S.

2012-01-01T23:59:59.000Z

257

Nanocrystalline non-stoichiometric SBT: Effect of milling duration on structural and electrical characteristics  

Science Conference Proceedings (OSTI)

In the present work, nanocrystalline specimens of non-stoichiometric Strontium Bismuth Tantalate (SBT) ferroelectric ceramics were synthesized by mechanical activation process using a high energy planetary ball mill. The powders were milled for different milling durations (5, 10, 20 h) keeping the milling speed fixed at 300 rpm. Microstructural characterizations have been performed using X-ray diffraction, scanning electron microscopy, electron diffraction and transmission electron microscopy. Nanocrystallites with average grain size in the range of 30-50 nm are observed to be formed. Grain size is observed to decrease with increasing milling duration. Detailed dielectric study as a function of temperature has been carried out. It is observed that dielectric constant increases and dielectric loss decreases with increasing milling duration. The observed characteristics have been explained in terms of increased number of grain boundaries due to the reduction of granular size. - Highlights: Black-Right-Pointing-Pointer In the present work nano crystalline non-stoichiometric SBT has been synthesized. Black-Right-Pointing-Pointer The technique involved is mechanical activation (high energy ball milling). Black-Right-Pointing-Pointer The milling duration has been optimized. Black-Right-Pointing-Pointer Sr0.8Bi2.2Ta2O9 milled for 20 hours exhibit enhanced electrical characteristics.

Sugandha, E-mail: miglani.sugandha@gmail.com [Thin Film and Material Science Laboratory, Department of Applied Physics, Delhi Technological University (Formerly Delhi College of Engineering), Delhi-110042 (India); Jha, A.K., E-mail: Prof.akjha@gmail.com [Thin Film and Material Science Laboratory, Department of Applied Physics, Delhi Technological University (Formerly Delhi College of Engineering), Delhi-110042 (India); Department of Applied Sciences, Ambedkar Institute of Technology, GGSIPU, Geeta Colony, Delhi-110092 (India)

2012-03-15T23:59:59.000Z

258

Self locking coupling mechanism for engaging and moving a load  

DOE Patents (OSTI)

A coupling mechanism for engaging and lifting a load has a housing with a guide passage for receiving a knob which is secured to the load through a neck of smaller diameter. A hollow ball in the housing has an opening which receives the knob and the ball is then turned to displace the opening from the housing passage and to cause the neck to enter a slot in the ball thereby securing the load to the coupling mechanism as elements of the housing block travel of the neck back into the opening when the ball is turned to the load holding orientation. As engagement of the load and locking of the coupling mechanism are accomplished simultaneously by the same ball motion, operation is simplified and reliability is greatly increased. The ball is preferably turned by a motor through worm gearing and the coupling mechanism may be controlled from a remote location. Among other uses, the coupling mechanism is adaptable to the handling of spent nuclear reactor fuel elements.

Wood, R.L.; Casamajor, A.B.; Parsons, R.E.

1980-09-12T23:59:59.000Z

259

Mine-to-Mill Optimization of Aggregate Production  

Science Conference Proceedings (OSTI)

Mine-to-Mill optimization is a total systems approach to the reduction of energy and cost in mining and mineral processing operations. Developed at the Julius Krutschnitt Mineral Research Centre (JKMRC) in Queensland, Australia, the Mine-to-Mill approach attempts to minimize energy consumption through the optimization of all steps in the size reduction process. The approach involves sampling and modeling of blasting and processing, followed by computer simulation to optimize the operation and develop alternatives. The most promising alternatives are implemented, and sampling is conducted to quantify energy savings. In the current project, the primary objective is to adapt the JKMRC Mine-to-Mill technology to the aggregates industry. The second phase of this project is being carried out at the Pittsboro Quarry located south of Chapel Hill, North Carolina. This quarry is owned by 3M Corporation and operated by Luck Stone. Based on lessons learned from the first phase work, long-term monitoring ({approx} three months) of all quarry operations is being carried out to minimize the impact of geological changes during the mining process. To date, the blasting and processing operations have been audited and modeled, the long-term monitoring of current Luck Stone practice has been completed, and a modified blasting approach has been implemented based on the results of simulations using JKSimBlast and JKSimPlant. The modified blasting approach is expected to increase the primary throughput by 15% and the secondary throughput by approximately 6%, with an overall specific energy reduction of around 1%. Long-term monitoring is currently underway to evaluate the impact the modified blasting approach. This report summarizes the current status of work at the Pittsboro Quarry.

Greg Adel; Toni Kojovic; Darren Thornton

2006-06-01T23:59:59.000Z

260

Uranium Mill Tailings Remedial Action Project. 1995 Environmental Report  

SciTech Connect

In accordance with U.S. Department of Energy (DOE) Order 23 1. 1, Environment, Safety and Health Reporting, the DOE prepares an annual report to document the activities of the Uranium Mill Tailings Remedial Action (UMTRA) Project environmental monitoring program. This monitoring must comply with appropriate laws, regulations, and standards, and it must identify apparent and meaningful trends in monitoring results. The results of all monitoring activities must be communicated to the public. The UMTRA Project has prepared annual environmental reports to the public since 1989.

NONE

1996-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Stabilizing perturbative Yang-Mills thermodynamics with Gribov quantization  

E-Print Network (OSTI)

We evaluate the thermodynamic quantities of Yang-Mills theory using the Gribov quantization, which deals with nonperturbative resummation. The magnetic scale is automatically incorporated into the framework and we find it efficient to stabilize the perturbative expansion of the free energy. In the temperature range $T=T_c \\sim 2\\,T_c$ the major uncertainty in our results comes from the nonperturbative running coupling that is adopted from the lattice simulation, while the convergence above $2\\,T_c$ is impressively robust. We also present the corresponding interaction measure (i.e., trace anomaly) up to close to $T_c$.

Kenji Fukushima; Nan Su

2013-04-30T23:59:59.000Z

262

Uranium Mill Tailings Remedial Action Project environmental protection implementation plan  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the U.S. Department of Energy (DOE) Order 5400.1. The UMTRA EPIP is updated annually. This version covers the time period of 9 November 1994, through 8 November 1995. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies.

Not Available

1994-10-01T23:59:59.000Z

263

Fusion hierarchies for N = 4 superYang-Mills theory  

E-Print Network (OSTI)

We employ the analytic Bethe Anzats to construct eigenvalues of transfer matrices with finite-dimensional atypical representations in the auxiliary space for the putative long-range spin chain encoding anomalous dimensions of all composite single-trace gauge invariant operators of the maximally supersymmetric Yang-Mills theory. They obey an infinite fusion hierarchy which can be reduced to a finite set of integral relations for a minimal set of transfer matrices. This set is used to derive a finite systems of functional equations for eigenvalues of nested Baxter polynomials.

A. V. Belitsky

2008-03-13T23:59:59.000Z

264

Tool fabrication system for micro/nano milling—function analysis and design of a six-axis Wire EDM machine  

E-Print Network (OSTI)

system for micro/nano milling—function analysis and designcan only be fabricated by milling operations instead ofprocesses with ultra-hard milling tools made of PCD or CBN.

Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

2010-01-01T23:59:59.000Z

265

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network (OSTI)

1991). Energy from a Flour Mill Waste Water. Case study CA-Variable Speed Drives on a Flour Mill Extract Fan. AvailableCOD/m 3 /day. Ogilvie flour mills use an anaerobic treatment

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

266

Rules of Engagement for Exercise Players, March 12, 2007 | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rules of Engagement for Exercise Players, March 12, 2007 Rules of Engagement for Exercise Players, March 12, 2007 Rules of Engagement for Exercise Players, March 12, 2007 Rules of engagement (ROE) provide for control of an exercise while allowing maximum free play in a tactical setting and enable evaluators to objectively monitor a participant's performance. Use of engagement simulation systems (ESSs) promotes realistic simulation of real-world response actions, which is vital to performance testing and evaluation. ROE govern the activities of all players (participants, controllers, and evaluators) throughout the exercise period, regardless of the organization, the identified training or evaluation objectives, or the particular scenario. Rules of Engagement for Exercise Players, March 12, 2007 More Documents & Publications

267

Stakeholder Engagement and Outreach: Resources and Tools for Siting Wind  

Wind Powering America (EERE)

Federal, Federal, State, & Local Printable Version Bookmark and Share Economic Development Policy Public Lands Public Power Regional Activities State Activities State Lands Siting Resources & Tools Resources for Siting Wind Turbines This page lists information resources such as publications, websites, and news for siting wind turbines. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 39 records found. Page 1 of 8, Sorted by descending date Filtered by: Siting 1 2 3 4 5 6 7 8 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

268

Stakeholder Engagement and Outreach: Resources for Public Lands  

Wind Powering America (EERE)

Resources Public Power Regional Activities State Activities State Lands Siting Resources for Public Lands This page lists wind-related resources and tools such as publications, Web resources, and news about public lands. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 24 records found. Page 1 of 5, Sorted by descending date Filtered by: Public Lands 1 2 3 4 5 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

269

Stakeholder Engagement and Outreach: Wind Economic Development Resources  

Wind Powering America (EERE)

Development Resources and Tools Development Resources and Tools This page lists wind-related economic development resources and tools such as publications, Web resources, and news. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 198 records found. Page 1 of 40, Sorted by descending date Filtered by: Econ. Dev. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

270

Stakeholder Engagement and Outreach: Wind Resource Maps and Anemometer Loan  

Wind Powering America (EERE)

Maps & Data Maps & Data Printable Version Bookmark and Share Utility-Scale Land-Based Maps Offshore Maps Community-Scale Maps Residential-Scale Maps Anemometer Loan Programs & Data Wind Resource Maps and Anemometer Loan Program Data The Stakeholder Engagement and Outreach initiative provides wind maps and validation to help states and regions build capacity to support and accelerate wind energy deployment. Read about the available wind maps for utility-, community-, and residential-scale wind development. A wind resource map of the United States showing land-based with offshore resources. The Energy Department, the National Renewable Energy Laboratory, and AWS Truepower provide the wind resource map that shows land-based with offshore resources. This map is the first to provide wind developers and policy

271

Stakeholder Engagement and Outreach: Policy Resources and Tools  

Wind Powering America (EERE)

Policy Resources and Tools Policy Resources and Tools This page lists wind-related policy resources and tools such as publications, Web resources, and news. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 120 records found. Page 1 of 24, Sorted by descending date Filtered by: Policy 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

272

Stakeholder Engagement and Outreach: Education and School Resources  

Wind Powering America (EERE)

Education and School Resources Education and School Resources Filter the Wind Powering America database for information resources about Wind for Schools, education and training programs, news, and educational links. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 139 records found. Page 1 of 28, Sorted by descending date Filtered by: Schools 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

273

Recommendations for NEAMS Engagement with the NRC: Preliminary Report  

SciTech Connect

The vision of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program is to bring a new generation of analytic tools to the nuclear engineering community in order to facilitate students, faculty, industry and laboratory researchers in investigating advanced reactor and fuel cycle designs. Although primarily targeting at advance nuclear technologies, it is anticipated that these new capabilities will also become interesting and useful to the nuclear regulator Consequently, the NEAMS program needs to engage with the Nuclear Regulatory Commission as the software is being developed to ensure that they are familiar with and ready to respond to this novel approach when the need arises. Through discussions between key NEAMS and NRC staff members, we tentatively recommend annual briefings to the Division of Systems Analysis in the NRC's Office of Nuclear Regulatory Research. However the NEAC subcommittee review of the NEAMS program may yield recommendations that would need to be considered before finalizing this plan.

Bernholdt, David E [ORNL

2012-06-01T23:59:59.000Z

274

Biorefinery Concept Development Based on Wheat Flour Milling  

SciTech Connect

We are developing an innovative process for the recovery of a starch-rich product from millfeed (the low-value byproduct of wheat flour milling); enzymatic processing of the starch to glucose; and the subsequent processes for conversion of that glucose into a value-added product by either a catalytic or a fermentation process. We have completed the development of the starch recovery step with enzymatic processing and the assessment of its economic viability. The processes to use the glucose product as feedstock for catalytic processing and fermentation processing have been tested in the laboratory. Catalytic processing of the glucose from the extracted starch for polyol production is based on catalytic hydrogenation to sorbitol. Alternatively, fermentation of the extracted starch-derived glucose also provides a pathway to value-added chemical products via a platform chemical, lactic acid. The paper includes results from all the processing areas addressed. Starch extraction and glucose generation from wheat milling byproducts are presented with laboratory and scaled-up processing results. Results of fermentation of the glucose product to lactic acid in shaker flask tests are presented, documenting the minimal requirements for nutrient addition. Stirred batch reactor tests of catalytic hydrogenation of the glucose product to sorbitol are presented with a discussion of contaminant effects on the catalyst.

Elliott, Douglas C.; Orth, Rick J.; Werpy, Todd A.; Gao, Johnway; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.; Murry, J; Flagg, Anthony; Lahman, L; Mennel, D; Lin, C J.; Landucci, Ron; Crockett, John; Peterson, Charles L.

2002-09-22T23:59:59.000Z

275

Opportunities for Utility-Owned CHP at Dry-Mill Fuel Ethanol Plants  

Science Conference Proceedings (OSTI)

This report quantifies opportunities to co-locate natural-gas-fueled combined heat and power (CHP) facilities with corn dry-mill fuel ethanol plants in the upper Midwest. It also evaluates the opportunity to generate renewable power by fueling the CHP plants with biogas produced by anaerobic digestion of the byproducts of the corn wet-milling process.

2008-09-23T23:59:59.000Z

276

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power Plants  

E-Print Network (OSTI)

Color Removal from Pulp Mill Effluent Using Coal Ash Produced from Georgia Coal Combustion Power color from pulp mill effluent using coal ash. Prevent coal ash adsorbent from leaching arsenic, chromium, lead, and zinc. Define a treatment procedure using coal ash that will result in the maximum

Hutcheon, James M.

277

Results of a Coal Pile and Mill Rejects Investigation at a Power Generating Station  

Science Conference Proceedings (OSTI)

Besides coal piles, coal-fired power plants may have various by-products, such as mill rejects, fly ash, and bottom ash that must be managed on plant property. This report presents the results of data analyses and groundwater modeling to evaluate potential management options for coal piles and mill rejects at one such site.

1997-07-08T23:59:59.000Z

278

Application of Particle Swarm Optimization technique for achieving desired milled surface roughness in minimum machining time  

Science Conference Proceedings (OSTI)

Face milling is a widely used machining operation to produce various components. The finished component depends not only on the dimensional accuracy but also on the surface finish. The present method of selection of machining parameters by trial and ... Keywords: Face milling, Machining parameters, Machining time, Particle Swarm Optimization, Surface roughness

S. Bharathi Raja; N. Baskar

2012-04-01T23:59:59.000Z

279

Modeling and adaptive force control of milling by using artificial techniques  

Science Conference Proceedings (OSTI)

The contribution discusses the use of combining the methods of neural networks, fuzzy logic and PSO evolutionary strategy in modeling and adaptively controlling the process of ball-end milling. On the basis of the hybrid process modeling, off-line optimization ... Keywords: Adaptive force control, End-milling, Hybrid modeling, Neural networks

U. Zuperl; F. Cus; M. Reibenschuh

2012-10-01T23:59:59.000Z

280

Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone Moab Mill Tailings Pile 25 Percent Disposed: DOE Moab Project Reaches Significant Milestone June 3, 2011 - 12:00pm Addthis Media Contacts Donald Metzler Moab Federal Project Director (970) 257-2115 Wendee Ryan S&K Aerospace Public Affairs Manager (970) 257-2145 Grand Junction, CO - One quarter of the uranium mill tailings pile located in Moab, Utah, has been relocated to the Crescent Junction, Utah, site for permanent disposal. Four million tons of the 16 million tons total has been relocated under the Uranium Mill Tailings Remedial Action Project managed by the U.S. Department of Energy (DOE). A little over 2 years ago, Remedial Action Contractor EnergySolutions began

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Process for Transition of Uranium Mill Tailings Radiation Control Act Title  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Uranium Mill Tailings Radiation Control Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012) Process for Transition of Uranium Mill Tailings Radiation Control Act Title II Disposal Sites to the U.S. Department of Energy Office of Legacy Management for Long-Term Surveillance and Maintenance (March 2012)

282

DOE - Office of Legacy Management -- Slick Rock Mill Site - CO 08  

NLE Websites -- All DOE Office Websites (Extended Search)

Slick Rock Mill Site - CO 08 Slick Rock Mill Site - CO 08 FUSRAP Considered Sites Site: Slick Rock Mill Site (CO.08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Slick Rock, Colorado, Processing Site Documents Related to Slick Rock Mill Site 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Slick Rock, Colorado, Disposal Site. LMS/S09461. February 2013 Verification Monitoring Report for the Slick Rock, Colorado, Processing Sites, 2007 Update June 2008 Office of Legacy Management DOE M/1577 2008 - -L Work Performed Under DOE Contract No. for the U.S.

283

DOE - Office of Legacy Management -- Green River Mill Site - UT 0-01  

Office of Legacy Management (LM)

Green River Mill Site - UT 0-01 Green River Mill Site - UT 0-01 FUSRAP Considered Sites Site: Green River Mill Site (UT.0-01 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Green River, Utah, Disposal Site Documents Related to Green River Mill Site Data Validation Package for the June 2009 Groundwater and Surface Water Sampling at the Green River, Utah, Disposal Site; LMS/GRN/S0609; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Green River, Utah, Disposal Site. LMS/S09461. February 2013 Historic Fact Sheet: Green River Disposal Site Uranium ore was

284

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

to Transport Moab Mill Tailings by Rail to Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

285

EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

355: Remediation of the Moab Uranium Mill Tailings, Grand and 355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah EIS-0355: Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah Summary The Remediation of the Moab Uranium Mill Tailings, Grand and San Juan Counties, Utah, Environmental Impact Statement and associated supplements and amendments provides information on the environmental impacts of the U.S. Department of Energy's (DOE's) proposal to (1) remediate approximately 11.9 million tons of contaminated materials located on the Moab site and approximately 39,700 tons located on nearby vicinity properties and (2) develop and implement a ground water compliance strategy for the Moab site using the framework of the Programmatic Environmental Impact Statement for the Uranium Mill Tailings Remedial Action Ground Water

286

DOE - Office of Legacy Management -- Riverton Mill Site - WY 0-04  

Office of Legacy Management (LM)

Mill Site - WY 0-04 Mill Site - WY 0-04 FUSRAP Considered Sites Site: Riverton Mill Site (WY.0-04 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Riverton, Wyoming, Processing Site Documents Related to Riverton Mill Site Data Validation Package for the November 2008 Groundwater and Surface Water Sampling at the Riverton, Wyoming, Processing Site. February 2009 U. S. Department of Energy (DOE) Status and Planned Actions at the Riverton, Wyoming, Uranium Mill Tailing Radiation Control Act (UMTRCA) Title I Site April Gil, PhD Environment Team Lead Office of Legacy Management (LM) May 2, 20122 Status and Action Summary 􀂄 Surface

287

DOE - Office of Legacy Management -- Gunnison Mill Site - CO 0-06  

Office of Legacy Management (LM)

Gunnison Mill Site - CO 0-06 Gunnison Mill Site - CO 0-06 FUSRAP Considered Sites Site: Gunnison Mill Site (CO.0-06 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Gunnison, Colorado, Processing Site Documents Related to Gunnison Mill Site Verification Montioring Report for the Gunnison, Colorado, Processing Site, September 2007. 2011 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Gunnison, Colorado, Disposal Site. LMS/S08056. January 2012 U.S. Department of Energy 2009 UMTRCA Title I Annual Report January 2010 Gunnison, Colorado Page 8-1 8.0 Gunnison, Colorado, Disposal Site

288

DOE - Office of Legacy Management -- Rifle Mill Site - CO 0-11  

Office of Legacy Management (LM)

Rifle Mill Site - CO 0-11 Rifle Mill Site - CO 0-11 FUSRAP Considered Sites Site: Rifle Mill Site (CO.0-11 ) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Rifle, Colorado, New Processing Site Rifle, Colorado, Old Processing Site Documents Related to Rifle Mill Site 2009 Verification Monitoring Report for the Old and New Rifle, Colorado, Processing Sites; LMS/RFO/RFN/S05775; September 2009. This report evaluates and interprets groundwater monitoring data collected at the Old and New Rifle Sites and assesses the progress of meeting the compliance strategy for groundwater cleanup. 2012 Annual Site Inspection and Monitoring Report for Uranium Mill

289

DOE - Office of Legacy Management -- Naturita Mill Site - CO 0-08  

Office of Legacy Management (LM)

Naturita Mill Site - CO 0-08 Naturita Mill Site - CO 0-08 FUSRAP Considered Sites Site: Naturita Mill Site (CO.0-08) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Naturita, Colorado, Processing Site Documents Related to Naturita Mill Site Data Validation Package for the July and October 2008 Water Sampling at the Naturita Processing and Disposal Sites Data Validation Report for the July 2009 Groundwater and Surface Water Sampling at the Naturita, Colorado, Processing Site; LMS/NAP/S00709; October 2009 2012 Annual Site Inspection and Monitoring Report for Uranium Mill Tailings Radiation Control Act Title I Disposal Sites-Naturita, Colorado,

290

Effect of Milling Parameters on the Dehydrogenation Properties of the Mg-Ti-H system  

DOE Green Energy (OSTI)

Magnesium-based alloys are promising candidates as potential hydrogen storage materials due to their inherent high hydrogen contents. Small particle size which can be achieved by milling, and small amounts of transition-metal compounds as catalysts result in increased hydrogen release/uptake kinetics. In this work, we examined the effects of various milling parameters and TiH2 content on the dehydrogenation properties of the Mg-Ti-H system. The samples were prepared with different amounts of TiH2 using various milling methods and conditions. The activation energy and the enthalpy change of dehydrogenation of the milled samples were determined by Thermogravimetric Analysis (TGA) and Differential Thermal Analyzer (DTA). The results indicated that the activation energy and enthalpy change of MgH2 dehydrogenation were significantly reduced when 9.1 mol % of TiH2 was added to it and the mixture was milled in a dual planet

Choi, Young Joon; Lu, Jun; Sohn, Hong Yong; Fang, Zhigang Zak; Ronnebro, Ewa

2009-11-05T23:59:59.000Z

291

Classical properties of the non-abelian Yang-Mills theories  

E-Print Network (OSTI)

We present some classical properties of the non-abelian Yang-Mills theories that we obtain directly from the Maxwell’s equations of the SU(3) Yang-Mills theory. To do it we first examine under which conditions the equations of motion for the SU(3) Yang-Mills theory have the same form as those of the classical electrodynamics. Next we write the equations of motion for the SU(3) Yang-Mills theory using the language of the Maxwell’s equations. We show that electric and magnetic non-abelian fields, whose origin is not fermionic, are present in the non-abelian Yang-Mills theories. The non-abelian gauge fields can be assumed as the sources of these electric and magnetic fields. Finally we show how the non-abelian gauge fields are also the responsible for the existence of magnetic monopoles in this kind of theories.

J. A. Sánchez-monroy; C. Quimbay

2007-01-01T23:59:59.000Z

292

DOE to Transport Moab Mill Tailings by Rail | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Transport Moab Mill Tailings by Rail Transport Moab Mill Tailings by Rail DOE to Transport Moab Mill Tailings by Rail August 5, 2008 - 2:40pm Addthis Department Approves Project Baseline and Obtains Nuclear Regulatory Commission Nod WASHINGTON, DC - The U.S. Department of Energy (DOE) today reaffirmed its prior decision to relocate mill tailings predominantly by rail from the former uranium-ore processing site near Moab, Utah, 30 miles north to Crescent Junction, Utah. As determined previously, oversized material that is not practical to be sized to fit into the containers will be transported by truck. "After evaluating the alternatives for safely transporting the mill tailings from Moab and considering input received from citizens in the Moab community and surrounding areas, DOE has decided to ship the tailings using

293

Monitoring the Performance of an Alternative Landfill Cover at the Monticello, Utah, Uranium Mill Tailings Disposal Site  

Energy.gov (U.S. Department of Energy (DOE))

Monitoring the Performance of an Alternative Landfill Cover at the Monticello, Utah, Uranium Mill Tailings Disposal Site

294

Thermal Green's functions of the energy-momentum tensor and transport coefficients of the SU(3) Yang-Mills gas  

E-Print Network (OSTI)

Thermal Green's functions of the energy-momentum tensor and transport coefficients of the SU(3) Yang-Mills gas

Karsch, Frithjof

1987-01-01T23:59:59.000Z

295

Final environmental statement related to the United Nuclear Corporation, Morton Ranch, Wyoming Uranium Mill (Converse County, Wyoming)  

SciTech Connect

Impacts from Morton Ranch Uranium Mill will result in: alterations of up to 270 acres occupied by the mill facilities; increase in the existing background radiation levels; socioeconomic effects on Glenrock and Douglas, Wyoming. Solid waste material (tailings solids) from the mill will be deposited onsite in exhausted surface mine pits. Any license issued for the Morton Ranch mill will be subject to conditions for the protection of the environment.

1979-02-01T23:59:59.000Z

296

Systematic evaluation of satellite remote sensing for identifying uranium mines and mills.  

SciTech Connect

In this report, we systematically evaluate the ability of current-generation, satellite-based spectroscopic sensors to distinguish uranium mines and mills from other mineral mining and milling operations. We perform this systematic evaluation by (1) outlining the remote, spectroscopic signal generation process, (2) documenting the capabilities of current commercial satellite systems, (3) systematically comparing the uranium mining and milling process to other mineral mining and milling operations, and (4) identifying the most promising observables associated with uranium mining and milling that can be identified using satellite remote sensing. The Ranger uranium mine and mill in Australia serves as a case study where we apply and test the techniques developed in this systematic analysis. Based on literature research of mineral mining and milling practices, we develop a decision tree which utilizes the information contained in one or more observables to determine whether uranium is possibly being mined and/or milled at a given site. Promising observables associated with uranium mining and milling at the Ranger site included in the decision tree are uranium ore, sulfur, the uranium pregnant leach liquor, ammonia, and uranyl compounds and sulfate ion disposed of in the tailings pond. Based on the size, concentration, and spectral characteristics of these promising observables, we then determine whether these observables can be identified using current commercial satellite systems, namely Hyperion, ASTER, and Quickbird. We conclude that the only promising observables at Ranger that can be uniquely identified using a current commercial satellite system (notably Hyperion) are magnesium chlorite in the open pit mine and the sulfur stockpile. Based on the identified magnesium chlorite and sulfur observables, the decision tree narrows the possible mineral candidates at Ranger to uranium, copper, zinc, manganese, vanadium, the rare earths, and phosphorus, all of which are milled using sulfuric acid leaching.

Blair, Dianna Sue; Stork, Christopher Lyle; Smartt, Heidi Anne; Smith, Jody Lynn

2006-01-01T23:59:59.000Z

297

SYNTHESIS OF METAL HYDRIDES BY MECHANICAL ALLOYING IN AN ATTRITOR MILL: FY07 STATUS REPORT  

DOE Green Energy (OSTI)

The objective of this task was to demonstrate that metal hydrides could be produced by mechanical alloying in the quantities needed to support the tritium production facilities at the Savannah River Site. The objective for the FY07 portion of this task was to demonstrate the production of Zr-Fe getter materials by mechanical alloying and begin to optimize the milling parameters. Three starting compositions (ratios of elemental Zr and Fe powders) were selected and attritor milled under argon for times of 8 to 60 hours. Hexane and liquid nitrogen were used as process control agents. In general, milling times of at least 24 hours were required to form the desired Zr{sub 2}Fe and Zr{sub 3}Fe phases, although a considerable amount of unalloyed Zr and Fe remained. Milling in liquid nitrogen does not appear to provide any advantages over milling in hexane, particularly due to the formation of ZrN after longer milling times. Carbides of Zr formed during some of the milling experiments in hexane. Formation of carbides during milling appears to be much less of an issue than formation of nitrides, although some of the phases that were not able to be identified in the XRD results may also be carbides. Additional XRD experiments should be designed to improve signal to noise ratio (i.e., longer count times) and use a wider scan range to better identify phases that were not clear in the original data. Elemental Zr was present in the as-milled material but not detected after annealing for milling times of 48 and 60 hours. It may be that after intimate mixing of the powders in the attritor mill the annealing temperature was sufficient to allow for the formation of a Zr-Fe alloy. The phase diagram for the binary Zr-Fe system agrees with this proposition. If this is the case, then the annealing conditions should also be investigated and optimized to form as much of the Zr-Fe alloy as possible in the milled powder. Also, this finding would mean that milling times of more than 48 hours are not necessary. Further investigation of this conversion is necessary, and could provide an opportunity for reducing the amount of unreacted metal powder after milling. Elemental Fe remained in all of the powders after annealing for all of the milling times tested. This may indicate that the ratio of Zr to Fe needs to be increased in order to improve the yield of the desired Zr-Fe alloys. Particle size analysis data are presented to aid in the selection of filters for future hydrogen sorption testing. Based on the XRD results, four samples were suggested for further XRD analysis and hydrogen sorption testing: (1) Zr{sub 2}Fe, 24 hr milling, annealed; (2) Zr{sub 2}Fe, 24 hr milling in LN{sub 2}, annealed; (3) Zr{sub 3}Fe, 24 hr milling, annealed; and (4) Zr{sub 3}Fe, 48 hr milling, annealed. These four samples showed the largest volume (based on relative peak intensities) of the desired Zr{sub 2}Fe and Zr{sub 3}Fe alloys.

Fox, K

2007-11-08T23:59:59.000Z

298

Lake Mills Light & Water | Open Energy Information  

Open Energy Info (EERE)

Water Water Jump to: navigation, search Name Lake Mills Light & Water Place Wisconsin Utility Id 10605 Utility Location Yes Ownership M NERC Location MRO NERC MRO Yes ISO MISO Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes References EIA Form EIA-861 Final Data File for 2010 - File1_a[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Utility Rate Schedules Grid-background.png Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount with Parallel Generation(20kW or less) Industrial Cp-1 Small Power Service between 50kW and 200kW Demand Primary Metering and Transformer Ownership Discount Industrial

299

Monticello Mill Tailings Site Operable Unit Ill Interim Remedial Action  

Office of Legacy Management (LM)

Site Site Operable Unit Ill Interim Remedial Action Mark Perfxmed Under DOE Contrici No. DE-AC13-96CJ873.35 for th3 U.S. De[:ar!menf of Energy app~oveJioi'ptiL#ic re1ease;dCinWlionis Unlimilra' This page intentionally left blank Monticello Mill Tailings Site Operable Unit I11 Interim Remedial Action Annual Status Report August 1999 Prepared for U.S. Department of Energy Albuquerque Operations Office Grand Junction Office Project Number MSG-035-0011-00-000 Document Number Q0017700 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC99-03 This page intentionally blank Document Number Q0017700 Acronyms Contents Page ACRONYMS .............................................................................................................................. V

300

Monticello Mill Tailings Site Operable Unit III Ecological Risk  

Office of Legacy Management (LM)

Monticello Monticello Mill Tailings Site Operable Unit III Ecological Risk Assessment September 1998 Prepared by U.S. Department of Energy Grand JunctionOffice Grand Junction, Colorado Project Number MSG-035-0004-00-000 Document Number Q0002l 00 Work Performed Under DOE Contract Number DE-AC13-96GJ87335 Task Order Number MAC98-03 This page intentionally blank , ** 1 ( ( Document Number Q00021 00 Contents Contents Page Acronyms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. ix Executive Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. xi 1.0 Introduction I-I 2.0 Problem Formulation : 2-1 2.1 Site Description 2-1 2.1.1 Physical Setting 2-1 2.1.2 Ecological Setting '.' 2-5 2.2 Ecological Contaminants of Concern 2-9 2.3 Contaminant Fate and Transport, Ecosystems Potentially at Risk, and Complete Exposure Pathways 2-11 i3.1

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Mine-to-Mill Optimization of Aggregate Production  

Science Conference Proceedings (OSTI)

Mine-to-Mill optimization is a total systems approach to the reduction of energy and cost in mining and processing. Developed at the Julius Krutschnitt Mineral Research Center in Queensland, Australia, the Mine-to-Mill approach attempts to minimize energy consumption through optimization of all steps in the size reduction process. The approach involves sampling and modeling of blasting and processing, followed by computer simulation to optimize the operation and develop alternatives. The most promising alternatives are implemented, and sampling is conducted to quantify benefits. In the current project, the primary objective was to adapt Mine-to-Mill technology to the aggregates industry. The first phase of this work was carried out at the Bealeton Quarry near Fredericksburg, Virginia. The second phase was carried out at the Pittsboro Quarry south of Chapel Hill, North Carolina. Both quarries are operated by Luck Stone Corporation of Richmond, Virginia. As a result of the work, several conclusions can be drawn from the project which should assist DOE in assessing the applicability of the Mine-to-Mill approach to the aggregates industry. 1. Implementation of MTM guidelines at Pittsboro has resulted in tangible improvements in productivity. It is clear that MTM guidelines represent an energy savings of around 5% (primary and secondary) and an overall energy savings of 1%. This 1-5% energy savings is also consistent with simulated results for Bealeton had side-by-side shots used to evaluate the technology been carried out in the same rockmass. 2. Luck Stone clearly runs their operations at a high standard. Hence the percentage improvement realized in this project may represent the lower end of what might be expected overall in the aggregates industry. 3. Variability in ore types across both Bealeton and Pittsboro suggests a 2:1 difference in hardness which contradicts the misconception that quarry rock is homogenous. Therefore, the idea of comparing side-by-side blasts is not viable and long term comparisons stand the best chance of confirming the benefits of optimized blasting. 4. There are clear limitations on how much improvement can be made in the aggregate industry due to the fixed feed size that reports to the tertiary section of a typical aggregate plant. These limitations restrict the MTM approach from exercising significant increases in blasting which would only serve to increase fines and reduce product yield. 5. The key to success at Pittsboro was the development of MTM guidelines for the modified blasting practice in consultation with the drill & blast crew. Their full buy-in was necessary to implement optimized blasting in a sustained manner. 6. The JKSimBlast and JKSimMet models have proven to be effective tools for examining blasting and processing at Bealeton and Pittsboro. These models should enable Luck Stone to transfer the MTM approach to other sites.

Greg Adel; Toni Kojovic; Darren Thornton

2006-09-30T23:59:59.000Z

302

Chiral symmetry and the Yang--Mills gradient flow  

E-Print Network (OSTI)

In the last few years, the Yang--Mills gradient flow was shown to be an attractive tool for non-perturbative studies of non-Abelian gauge theories. Here a simple extension of the flow to the quark fields in QCD is considered. As in the case of the pure-gauge gradient flow, the renormalizability of correlation functions involving local fields at positive flow times can be established using a representation through a local field theory in 4+1 dimensions. Applications of the extended flow in lattice QCD include non-perturbative renormalization and O(a) improvement as well as accurate calculations of the chiral condensate and of the pseudo-scalar decay constant in the chiral limit.

Martin Lüscher

2013-02-21T23:59:59.000Z

303

Guidelines for cleanup of uranium tailings from inactive mills  

SciTech Connect

Recent experiences in Grand Junction, Colorado, have indicated the significance of uranium tailings as sources of nonoccupational exposure and suggest that current methods for perpetual care and isolation of the large areas covered by tailings piles at inactive mill locations may be inadequate for minimizing human exposure. This paper presents the rationale and the procedures used in reviewing the adequacy of proposed criteria for remedial action at these sites. Exposures due to aquatic, terrestrial, airborne, and direct contamination pathways were compared to determine the most important radionuclides in the pile and their pathways to man. It is shown that the most hazardous components of the tailings are $sup 226$Ra and $sup 230$Th. The long half-lives of these radionuclides require the consideration of continuous occupancy of the vacated site at some future time, even if the immediately projected land use does not anticipate maximum exposure. (auth)

Goldsmith, W.A.; Haywood, F.F.; Jacobs, D.G.

1975-01-01T23:59:59.000Z

304

Uranium Mill Tailings Remedial Action Project 1993 Environmental Report  

SciTech Connect

This annual report documents the Uranium Mill Tailing Remedial Action (UMTRA) Project environmental monitoring and protection program. The UMTRA Project routinely monitors radiation, radioactive residual materials, and hazardous constituents at associated former uranium tailings processing sites and disposal sites. At the end of 1993, surface remedial action was complete at 10 of the 24 designated UMTRA Project processing sites. In 1993 the UMTRA Project office revised the UMTRA Project Environmental Protection Implementation Plan, as required by the US DOE. Because the UMTRA Project sites are in different stages of remedial action, the breadth of the UMTRA environmental protection program differs from site to site. In general, sites actively undergoing surface remedial action have the most comprehensive environmental programs for sampling media. At sites where surface remedial action is complete and at sites where remedial action has not yet begun, the environmental program consists primarily of surface water and ground water monitoring to support site characterization, baseline risk assessments, or disposal site performance assessments.

Not Available

1994-10-01T23:59:59.000Z

305

Dual superconductivity and vacuum properties in Yang--Mills theories  

E-Print Network (OSTI)

We address, within the dual superconductivity model for color confinement, the question whether the Yang-Mills vacuum behaves as a superconductor of type I or type II. In order to do that we compare, for the theory with gauge group SU(2), the determination of the field penetration depth $\\lambda$ with that of the superconductor correlation length $\\xi$. The latter is obtained by measuring the temporal correlator of a disorder parameter developed by the Pisa group to detect dual superconductivity. The comparison places the vacuum close to the border between type I and type II and marginally on the type II side. We also check our results against the study of directly measurable effects such as the interaction between two parallel flux tubes, obtaining consistent indications for a weak repulsive behaviour. Future strategies to improve our investigation are discussed.

A. D'Alessandro; M. D'Elia; L. Tagliacozzo

2006-07-12T23:59:59.000Z

306

Dual Superconductivity from Yang-Mills Theory via Connection Decomposition  

E-Print Network (OSTI)

We derive an Abelian-Higgs-like action from SU(2) Yang-Mills theory via monopole-condensation assumption. Abelian projection as well as chromo-'electric-magnetic' duality are naturally realized by separating the small off-diagonal gluon part from diagonal gluon field according to the order of inverse coupling constant($1/g$). It is shown that Abelian dominance can follow from infrared behavior of ranning coupling constant and the mass generation of chromo-electric field as well as off-diagonal gluon is due to the quantum fluctuation of orientation of Abelian direction. Dual superconductivity of theory vacuum is confirmed by deriving dual London equation for chromo-electronic field.

Duoje Jia

2005-09-03T23:59:59.000Z

307

Uranium Mill Tailings Remedial Action Project Environmental Protection Implementation Plan  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Remedial Action (UMTRA) Project Environmental Protection Implementation Plan (EPIP) has been prepared in accordance with the requirements of the US Department of Energy (DOE) Order 5400.1. The UMTRA EPIP covers the time period of November 9, 1993, through November 8, 1994. It will be updated annually. Its purpose is to provide management direction to ensure that the UMTRA Project is operated and managed in a manner that will protect, maintain, and where necessary, restore environmental quality, minimize potential threats to public health and the environment, and comply with environmental regulations and DOE policies. Contents of this report are: (1) general description of the UMTRA project environmental protection program; (2) notifications; (3) planning and reporting; (4) special programs; (5) environmental monitoring programs; (6) quality assurance and data verification; and (7) references.

Vollmer, A.T.

1993-10-01T23:59:59.000Z

308

Ion-plasma gun for ion-milling machine  

DOE Patents (OSTI)

An ion gun includes an elongated electrode with a hollow end portion closed by a perforated end plate. The end plate is positioned parallel to a perforated flat electrode of opposite electrical polarity. An insulated sleeve encompasses the elongated electrode and extends outwardly from the perforated end towards the flat electrode. The sleeve length is separated into two portions of different materials. The first is formed of a high-temperature material that extends over the hollow portion of the elongated electrode where the arc is initiated by a point source electrode. The second sleeve portion extending over the remainder of the elongated electrode is of a resilient material for enhanced seal-forming ability and retention of plasma gas. Perforations are arranged in the flat electrode in a mutually opposing triangular pattern to project a plasma beam having a generally flat current profile towards a target requiring precision milling.

Kaminsky, Manfred S. (Hinsdale, IL); Campana, Jr., Thomas J. (Hinsdale, IL)

1976-01-01T23:59:59.000Z

309

Protect and Restore Mill Creek Watershed : Annual Report CY 2005.  

DOE Green Energy (OSTI)

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. The Nez Perce Tribe and the Nez Perce National Forest (NPNF) have formed a partnership in completing watershed restoration activities, and through this partnership, more work is accomplished by sharing funding and resources in our effort. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. Starting in FY 2002, continuing into 2004, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed, and one high priority culvert was replaced in 2004. Maintenance to the previously built fence was also completed.

McRoberts, Heidi

2006-03-01T23:59:59.000Z

310

Mill Seat Landfill Bioreactor Renewable Green Power (NY)  

Science Conference Proceedings (OSTI)

The project was implemented at the Mill Seat landfill located in the Town of Bergen, Monroe County, New York. The landfill was previously equipped with a landfill gas collection system to collect methane gas produced by the bioreactor landfill and transport it to a central location for end use. A landfill gas to energy facility was also previously constructed at the site, which utilized generator engines, designed to be powered with landfill methane gas, to produce electricity, to be utilized on site and to be sold to the utility grid. The landfill gas generation rate at the site had exceeded the capacity of the existing generators, and the excess landfill gas was therefore being burned at a candlestick flare for destruction. The funded project consisted of the procurement and installation of two (2) additional 800 KW Caterpillar 3516 generator engines, generator sets, switchgear and ancillary equipment.

Barton & Loguidice, P.C.

2010-01-07T23:59:59.000Z

311

A study in engaging female students in computer science using role models  

Science Conference Proceedings (OSTI)

An effective approach to engaging young women to take computing in higher education is to provide examples of successful female computer scientists. Can a print publication that combines core computing concepts with inspiring stories of women in the ... Keywords: cs4fn., diversity, gender issues, girls, k-12, outreach, public engagement, recruitment, representation, teachers

Jonathan Black; Paul Curzon; Chrystie Myketiak; Peter W. McOwan

2011-06-01T23:59:59.000Z

312

The University of Texas at Austin | Division of Diversity and Community Engagement Introduction ...........................................................................................................................................3  

E-Print Network (OSTI)

The University of Texas at Austin | Division of Diversity and Community Engagement #12;contents..................................................................................................BACK COVER #12;The University of Texas at Austin 3 introduction The University of Texas at Austin is proud Division of Diversity and Community Engagement The University of Texas at Austin 1 University Station A5800

Texas at Austin, University of

313

Sociologically imagined: the decentering of C. Wright Mills, the postmodern cowboy  

E-Print Network (OSTI)

Examining early biographical events in C. Wright Mills’ life, along with his relationships to his family, some of whom he denied as even being family later in his life, the following study demonstrates a link between the early psychological traumas of a young Mills and the strong impact these had on his later intellectual thought. Such an approach looms as potentially important and beneficial in gaining insight into Mills’ theoretical positions when we turn to academics such as Alice Miller, Sigmund Freud and C.G. Jung who demonstrate the lasting and shaping impact that early psychological development has on the thoughts, ideas and expressions of older adults. Even for empirical-based sociologists who may be hesitant to accept psychoanalytic explanations, it is difficult to reject this position outright. Even within sociology’s own house, Max Weber, Talcott Parsons, David Riesman and C. Wright Mills also utilize basic psychoanalytic insights in their sociological writings. Using Mills’ psychological development as an entry point, this work demonstrates the similarities between Mills’ early biographical trajectory and its psychological impact on his later life as compared to very similar developments in the lives of Friedrich Nietzsche, Thorstein Veblen and Weber. Ultimately, we come to see that not only is Mills’ early psychological development similar to these earlier thinkers, but his intellectual thought later in his life is similar as well.

Kerr, Keith Thomas

2007-05-01T23:59:59.000Z

314

Stakeholder Engagement and Outreach: Agricultural and Rural Resources and  

Wind Powering America (EERE)

Agricultural and Rural Resources and Tools Agricultural and Rural Resources and Tools This page lists resources and tools specifically for the agricultural community. Currently the page lists an online calculator that provides quick, detailed economic evaluation of potential utility-scale wind energy projects and the page links to other Web sites. Search the Stakeholder Engagement and Outreach initiative's Database Choose a Type of Information All News Publications Web Resource Videos Choose # of Records per Page Default (10 per page) 5 25 50 To search the titles, enter a word or phrase. Start Search Clear Contents Total of 137 records found. Page 1 of 28, Sorted by descending date Filtered by: Agricultural 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Next Page >> Date sort by ascending date sort by descending date State sort by ascending state sort by descending state Type of Information Program Area Title sort by ascending title sort by descending title

315

Uranium Mill Tailings Remedial Action Project, Surface Project Management Plan. Revision 1  

SciTech Connect

Title I of the Uranium Mill Tailings Radiation Control Act (UMTRCA) authorizes the US Department of Energy (DOE) to undertake remedial action at 24 designated inactive uranium processing sites and associated vicinity properties (VP) containing uranium mill tailings and related residual radioactive materials. The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Surface Project is to minimize or eliminate radiation health hazards to the public and the environment at the 24 sites and related VPs. This document describes the management organization, system, and methods used to manage the design, construction, and other activities required to clean up the designated sites and associated VPs, in accordance with the UMTRCA.

Not Available

1994-12-01T23:59:59.000Z

316

Titania Prepared by Ball Milling: Its Characterization and Application as Liquefied Petroleum Gas Sensor  

E-Print Network (OSTI)

Present paper reports the LPG sensing of TiO2 obtained through ball milling. The milled powder was characterized by XRD, TEM and UV-visible spectroscopy. Further the ball milled powder was compressed in to pellet using hydraulic press. This pellet was investigated with the exposure of LPG. Variations in resistance with exposure of LPG to the sensing pellet were recorded. The sensitivity of the sensor was ~ 11 for 5 vol.% of LPG. Response and recovery times of the sensor were ~ 100 and 250 sec. The sensor was quite sensitive to LPG and results were found reproducible within 91%.

Yadav, B C; Singh, Satyendra; Yadav, T P

2012-01-01T23:59:59.000Z

317

Energy and protein production from pulp mill wastes. Quarterly report, December 15, 1978-March 15, 1979  

SciTech Connect

The objective for the past quarter included reversing the decline in productivity from the methane fermenters, confirming methane and yeast production from acetate, and making trial runs on kraft mill and semichemical mill effluents. Although methane production remained low (20 cc/hr) addition of 2% methanol doubled production. Progress has been made on identifying possible viruses that might be preventing higher methane production. Confirmation that acetate can be used as a substrate for methane production has been obtained. An initial test on the Decker filtrate from a kraft mill gave 20 cc/hr methane production.

Jurgensen, M.F.; Patton, J.T.

1979-03-15T23:59:59.000Z

318

Detection of Tool Flute Breakage in End Milling Using Feed-Motor Current Signatures  

E-Print Network (OSTI)

In this paper, an effective algorithm based on improved time-domain averaging is proposed to detect tool flute breakage during end milling using feed-motor current signatures. The algorithm proposed is demonstrated to be effective in detecting tool flute breakage in real time through a series of milling experiments, and is also demonstrated to be insensitive to the effects for transients, such as cutter runout, entry/exit cuts, and noise in the feed-motor current signals. Results indicated that the approach showed excellent potential for practical, on-line application for tool flute breakage detection during end milling.

Xiao Li

2001-01-01T23:59:59.000Z

319

Enhanced Oxidative Reactivity for Anthracite Coal via a Reactive Ball Milling Pretreatment Step  

Science Conference Proceedings (OSTI)

Reactive ball milling in a cyclohexene solvent significantly increases the oxidative reactivity of an anthracite coal, due to the combined effects of particle size reduction, metal introduction, introduction of volatile matter, and changes in carbon structure. Metals introduced during milling can be easily removed via a subsequent demineralization process, and the increased reactivity is retained. Solvent addition alters the morphological changes that occur during pyrolysis and leads to a char with significantly increased reactivity. When the solvent is omitted, similar effects are seen for the milled product, but a significant fraction of the char is resistant to oxidation. 33 refs., 3 figs., 1 tab.

Angela D. Lueking; Apurba Sakti; Dania Alvarez-Fonseca; Nichole Wonderling [Pennsylvania State University, PA (United States). Department of Energy and Mineral Engineering

2009-09-15T23:59:59.000Z

320

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely Moab Mill Tailings Removal Project Reaches 5 Million Tons Disposed: Project Accomplishes Milestone While Doing it Safely February 27, 2012 - 12:00pm Addthis Media Contacts Donald Metzler, Moab Federal Project Director, (970) 257-2115 Wendee Ryan, S&K Aerospace Public Affairs Manager, (970) 257-2145 Grand Junction, CO- The U.S. Department of Energy (DOE) reached another milestone today for the Uranium Mill Tailings Remedial Action Project, having shipped 5 million tons of tailings from the massive pile located in Moab, Utah, to the engineered disposal cell near Crescent Junction, Utah. The pile comprised an estimated 16 million tons total when DOE's Remedial

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Amends Decision for the Remediation of the Moab Uranium Mill Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah DOE Amends Decision for the Remediation of the Moab Uranium Mill Tailings in Moab, Utah February 29, 2008 - 11:43am Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) today announced an amendment to its 2005 Record of Decision (ROD) for the Moab Uranium Mill Tailings Remedial Action (UMTRA) Project to allow for the use of truck or rail in transporting residual radioactive materials from the Moab site in Utah. These materials will be relocated to a new disposal site 30 miles north at Crescent Junction, Utah. "The Department is committed to ensuring the protection of human health and the environment in the Moab area and in the communities served by the Colorado River," Assistant Secretary for Environmental Management Jim

322

DOE - Office of Legacy Management -- Monument Valley Mill Site - AZ 0-01  

Office of Legacy Management (LM)

Monument Valley Mill Site - AZ 0-01 Monument Valley Mill Site - AZ 0-01 FUSRAP Considered Sites Site: Monument Valley Mill Site (AZ.0-01) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: Also see Monument Valley, Arizona, Processing Site Documents Related to Monument Valley Mill Site Data Validation Package for the June 2009 Water Sampling at the Monument Valley, Arizona, Processing Site; LMS/MON/S0609; October 2009 Natural and Enhanced Attenuation of Soil and Ground Water at Monument Valley, Arizona, and Shiprock, New Mexico 2006 Status Report June 2008 Data Validation Package for 2007 Groundwater Sampling at the Monument Valley, AZ Processing Site

323

SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK  

Office of Legacy Management (LM)

SURVEY OF ROLLING MILL USED BY SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK Work performed by the Health and Safety Research Division Gak Ridge fiational Laboratory Oak Ridge, Tennessee 37830 September 1980 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Formerly Utilized Sites!- Remedial Action Program SURVEY OF ROLLING MILL USED BY BETHLEHEM STEEL CORPORATION LACKAWANNA, NEW YORK A radiological survey was conducted at the Bethelem Steel Corporation Plant in Lackawanna, New York, on September 23, 1980, by representatives of Oak Ridge National Laboratory (ORNL). The subject of the radiological survey was a portion of the original 25.4-cm (lo-inch) bar mill used in converting uranium billets into 3.8-cm rods. All radiation survey

324

Converting mill buildings into housing : ways of working with brick walls  

E-Print Network (OSTI)

The mill buildings of New England add a unique dimension to the heritage and identity of the region. Today some of these buildings continue to function as the site of industry, others have been converted to commercial or ...

Pressman, Paul

1981-01-01T23:59:59.000Z

325

Retrieving Storm Electric Fields from Aircraft Field Mill Data. Part I: Theory  

Science Conference Proceedings (OSTI)

It is shown that the problem of retrieving storm electric fields from an aircraft instrumented with several electric field mill sensors can be expressed in terms of a standard Lagrange multiplier optimization problem. The method naturally removes ...

W. J. Koshak

2006-10-01T23:59:59.000Z

326

Retrieving Storm Electric Fields from Aircraft Field Mill Data. Part II: Applications  

Science Conference Proceedings (OSTI)

The Lagrange multiplier theory developed in Part I of this study is applied to complete a relative calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the ...

W. J. Koshak; D. M. Mach; H. J. Christian; M. F. Stewart; M. G. Bateman

2006-10-01T23:59:59.000Z

327

Analytic calculation of Witten index in D= 2 supersymmetric Yang-Mills quantum mechanics  

Science Conference Proceedings (OSTI)

We evaluate analytically the Witten index of D= 2 supersymmetric Yang-Mills quantum mechanics. We rederive a known result for the SU(2) gauge group and generalize it to any SU(N) gauge group.

Korcyl, Piotr [M. Smoluchowski Institute of Physics, Jagiellonian University, Reymonta 4, 30-059 Krakow (Poland)

2012-10-15T23:59:59.000Z

328

Case Study of Optimal Byproduct Gas Distribution in Integrated Steel Mill Using Multi-Period Optimization  

E-Print Network (OSTI)

Energy constitutes about 20 % of the total production cost in an integrated steel mill, and therefore energy efficiency is crucial for profitability within the environmental policy context. An integrated steel mill generates high calorific value byproduct gases at varying rates. The differences between gas generation and consumption rates are compensated with gas holders. However, under certain circumstances the imbalances can lead to the flaring of excessive gas or require the purchase of supplementary fuel. This presentation describes a steel mill energy management system with sophisticated monitoring, planning, and optimization tools. It models the complex energy interconnections between various processes of the mill and determines the optimal trade-off between gas holder level control, flare minimization, and optimization of electricity purchase versus internal power generation. The system reduces energy cost, improves energy efficiency, manages carbon footprint, and provides environmental reporting features.

Makinen, K.; Kymalainen, T.; Junttila, J.

2012-01-01T23:59:59.000Z

329

Radiation of a circulating quark in strongly coupled N = 4 super Yang-Mills theory  

E-Print Network (OSTI)

The energy density and angular distribution of power radiated by a quark undergoing circular motion in strongly coupled N? = ?4 supersymmetric Yang?Mills (SYM) theory is computed using gauge?gravity duality. The results ...

Athanasiou, Christiana

330

The FreeD - A Handheld Digital Milling Device for Craft and Fabrication  

E-Print Network (OSTI)

We present an approach to combine digital fabrication and craft that is focused on a new fabrication experience. The FreeD is a hand-held, digitally controlled, milling device. It is guided and monitored by a computer while ...

Paradiso, Joseph

331

Optimal handling of Highly Active Pharmaceutical Ingredients during milling and blending operations  

E-Print Network (OSTI)

This thesis investigates best practices for Highly Active Pharmaceutical Ingredient (HAPI) milling and blending. We utilize a qualitative analysis centering on a benchmarking study and quantitative analyses using a ...

Setty, Prashant (Prashant Neelappanavara)

2013-01-01T23:59:59.000Z

332

Design of a desktop milling machine for fabrication in an introductory machine shop class  

E-Print Network (OSTI)

The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

Lorenc, Dan (Daniel P.)

2010-01-01T23:59:59.000Z

333

Yang-Mills Theory Constructed from Cho–Faddeev–Niemi Decomposition  

E-Print Network (OSTI)

We give a new way of looking at the Cho–Faddeev–Niemi (CFN) decomposition of the Yang-Mills theory to answer how the enlarged local gauge symmetry respected by the CFN variables is restricted to obtain another Yang-Mills theory with the same local and global gauge symmetries as the original Yang-Mills theory. This may shed new light on the fundamental issue of the discrepancy between two theories for independent degrees of freedom and the role of the Maximal Abelian gauge in Yang-Mills theory. As a byproduct, this consideration gives new insight into the meaning of the gauge invariance and the observables, e.g., a gauge-invariant mass term and vacuum condensates of mass dimension two. We point out the implications for the Skyrme–Faddeev model.

Kei-ichi Kondo; Takeharu Murakami; Toru Shinohara

2006-01-01T23:59:59.000Z

334

Ball-milled Materials as Inert Anodes for Aluminum Production in KF ...  

Science Conference Proceedings (OSTI)

In this study, various nanostructured materials including Cu-Ni-Fe, Cu-Al-Ni-Fe based alloys and (Cu-Ni-Fe + MOx) composites were prepared by ball milling, ...

335

Subject: Proposed 216(h) Regulations To: Brian.Mills@hq.doe...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

February 12, 2012 Subject: Proposed 216(h) Regulations To: Brian.Mills@hq.doe.gov and Lot.Cooke@hq.doe.gov. We appreciate the opportunity to review the Proposed Regulation for...

336

VOC Control in Kraft Mills - Final Report: Task A and Task B  

DOE Green Energy (OSTI)

The formation of volatile organic compounds (VOCs), such as methanol, in kraft mills has been an environmental concern. Methanol is soluble in water and can increase the biochemical oxygen demand. Furthermore, it can also be released into atmosphere at the process temperatures of kraft mill-streams. The Cluster Rule of the EPA now requires the control of the release of methanol in pulp and paper mills. This research program was conducted to develop a computer simulation tool for mills to predict VOC air emissions. To achieve the objective of the research program, much effort was made in the development of analytical techniques for the analysis of VOC and determination of vapor liquid partitioning coefficient of VOCs in kraft mill-streams using headspace gas chromatography. With the developed analytical tool, methanol formation in alkaline pulping was studied in laboratory to provide benchmark data of the amount of methanol formation in pulping in kraft mills and for the validation of VOC formation and vapor-liquid equilibrium submodels. Several millwide air and liquid samplings were conducted using the analytical tools developed to validate the simulation tool. The VOC predictive simulation model was developed based on the basic chemical engineering concepts, i.e., reaction kinetics, vapor liquid equilibrium, combined with computerized mass and energy balances. Four kraft mill case studies (a continuous digester, two brownstock washing lines, and a pre-evaporator system) are presented and compared with mill measurements. These case studies provide valuable, technical information for issues related to MACT I and MACT II compliance, such as condensate collection and Clean-Condensate-Alternatives (CCA).

Zhu, J.Y.; Chai, X.-S.; Edwards, L.L.; Gu, Y.; Teja, A.S.; Kirkman, A.G.; Pfromm, P.H.; Rezac, M.E.

2001-09-26T23:59:59.000Z

337

Accepting Mixed Waste as Alternate Feed Material for Processing and Disposal at a Licensed Uranium Mill  

SciTech Connect

Certain categories of mixed wastes that contain recoverable amounts of natural uranium can be processed for the recovery of valuable uranium, alone or together with other metals, at licensed uranium mills, and the resulting tailings permanently disposed of as 11e.(2) byproduct material in the mill's tailings impoundment, as an alternative to treatment and/or direct disposal at a mixed waste disposal facility. This paper discusses the regulatory background applicable to hazardous wastes, mixed wastes and uranium mills and, in particular, NRC's Alternate Feed Guidance under which alternate feed materials that contain certain types of mixed wastes may be processed and disposed of at uranium mills. The paper discusses the way in which the Alternate Feed Guidance has been interpreted in the past with respect to processing mixed wastes and the significance of recent changes in NRC's interpretation of the Alternate Feed Guidance that sets the stage for a broader range of mixed waste materials to be processed as alternate feed materials. The paper also reviews the le gal rationale and policy reasons why materials that would otherwise have to be treated and/or disposed of as mixed waste, at a mixed waste disposal facility, are exempt from RCRA when reprocessed as alternate feed material at a uranium mill and become subject to the sole jurisdiction of NRC, and some of the reasons why processing mixed wastes as alternate feed materials at uranium mills is preferable to direct disposal. Finally, the paper concludes with a discussion of the specific acceptance, characterization and certification requirements applicable to alternate feed materials and mixed wastes at International Uranium (USA) Corporation's White Mesa Mill, which has been the most active uranium mill in the processing of alternate feed materials under the Alternate Feed Guidance.

Frydenland, D. C.; Hochstein, R. F.; Thompson, A. J.

2002-02-26T23:59:59.000Z

338

Surface-invariants in 2D classical Yang-Mills theory  

Science Conference Proceedings (OSTI)

We study a method to obtain invariants under area-preserving diffeomorphisms associated to closed curves in the plane from classical Yang-Mills theory in two dimensions. Taking as starting point the Yang-Mills field coupled to nondynamical particles carrying chromo-electric charge, and by means of a perturbative scheme, we obtain the first two contributions to the on-shell action, which are area-invariants. A geometrical interpretation of these invariants is given.

Diaz, Rafael; Fuenmayor, E.; Leal, Lorenzo [Escuela de Matematicas, Facultad de Ciencias, Universidad Central de Venezuela, AP 20513, Caracas 1020-A (Venezuela); Centro de Fisica Teorica y Computacional, Facultad de Ciencias, Universidad Central de Venezuela, AP 47270, Caracas 1041-A (Venezuela)

2006-03-15T23:59:59.000Z

339

Phase I Energy Targeting Study Using Pinch Analysis: Kamloops Pulp Mill  

Science Conference Proceedings (OSTI)

On behalf of EPRI and Global Energy Partners, American Process Inc. (API) carried out an energy targeting study using pinch analysis at Kamloops Pulp Mill. API constructed complete process flow diagrams and a partial simulation model of the steam and condensate system and of the warm and hot water systems. The heat recovery opportunities were quantified and a new condensing turbine was evaluated by incorporating the mill data from October 24, 2001. This data was assumed to be representative of year-round...

2003-08-25T23:59:59.000Z

340

DeconfinementinYang-Mills: a conjecture for a general gauge Lie group G  

E-Print Network (OSTI)

Svetitsky and Yaffe have argued that — if the deconfinement phase transition of a (d+1)-dimensional Yang-Mills theory with gauge group G is second order — it should be in the universality class of a d-dimensional scalar model symmetric under the center C(G) of G. These arguments have been investigated numerically only considering Yang-Mills theory with gauge symmetry in the G = SU(N) branch, where C(G) = Z(N). The symplectic groups Sp(N) provide another extension of SU(2) = Sp(1) to general N and they all have the same center Z(2). Hence, in contrast to the SU(N) case, Sp(N) Yang-Mills theory allows to study the relevance of the group size on the order of the deconfinement phase transition keeping the available universality class fixed. Using lattice simulations, we present numerical results for the deconfinement phase transition in Sp(2) and Sp(3) Yang-Mills theories both in (2+1)d and (3+1)d. We then make a conjecture on the order of the deconfinement phase transition in Yang-Mills theories with general Lie groups SU(N), SO(N), Sp(N) and with exceptional groups G(2), F(4), E(6), E(7), E(8). Numerical results for G(2) Yang-Mills theory at finite temperature in (3 + 1)d are also presented.

M. Pepe A

2004-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Mass gap in quantum energy-mass spectrum of relativistic Yang-Mills fields  

E-Print Network (OSTI)

A relativistic quantum Yang-Mills theory with a simple compact gauge Lie group on the four-dimensional Minkowski spacetime is set up in a framework of infinite-dimensional pseudodifferential operators in a nuclear Kree-Gelfand triple. The linear quantum Yang-Mills energy-mass operator is defined as the anti-normal quantization of the non-linear Yang-Mills energy-mass functional of consrained Cauchy data supported by an euclidean ball of a radius R. It is shown that expectation functional of the Yang-Mills energy-mass operator majorises the expectation functional of a scaled occupation number operator so that, by variational spectral principles, the quantum Yang-Mills spectral mass gap is positive. The mass gap is proportional to 1/R. The running coupling constant is proportional to the square root of R, leading to an asymptotic freedom for quantum Yang-Mills theory at short distances. This mathematically rigorous theory is non-perturbative and provides a solution for the 7th Clay Institute Millennium problem.

Alexander Dynin

2013-08-29T23:59:59.000Z

342

Numerical investigation of the grinding process in a Beater Wheel mill with classifier  

SciTech Connect

A numerical investigation is presented for a two-dimensional simulation of the gas flow field and of the dynamic behavior of lignite particles inside Beater Wheel mills with classifier, installed in large coal-fired plants. A large number of representative particles are tracked using Lagrangian equations of motion, in combination with a stochastic model for particle turbulent dispersion. All the important mechanisms associated with the particle motion through the mill (particle-surface collisions and rebounding phenomena, fuel moisture evaporation and erosion wear of internal surfaces) are modeled. A special model is constructed to simulate the fragmentation of impacting particles and to calculate the size distribution of the final mill product. The models are regulated on the basis of available data from grinding mills of the Greek lignite power stations. The numerical code is capable of predicting the locations of significant erosion and to estimate the amount of particle mass that circulates through the mill via the classifying chamber. Mean impact velocity and impingement angle distributions along all the internal surfaces are also provided. The results indicate remarkable differences in the extent of the erosion caused at different locations of the mill. Also, the significant role of the leading blades arrangement inside the classifier on its classification performance and efficiency is elucidated.

Anagnostopoulos, J.; Bergeles, G. [National Technical Univ. of Athens (Greece)

1997-07-01T23:59:59.000Z

343

Load-carrying capacity of oils for rolling mills  

SciTech Connect

This article reports on an investigation of the loadcarrying capacity of the compounded oils Pp-6, Pp-17, and Pp-28 that have been developed for liquid-friction bearings (LFB) as compared to nonadditive oils. A PZhT-140-300 single-roll stand for the lubrication of a regular-production PZhT-180 bearing was used in the study. The load/sliding speed curves obtained from the test oil were compared with the theoretical curve for the load-carrying capacity of the LFB for nonadditive oil and the curve obtained for the oil base stock at the corresponding viscosity level. It is determined that the compounded oils examined are 15-25% better in terms of load-carrying capacity than the oil base stocks, and 20-25% better than the nonadditive oils. The results demonstrate that the introduction of additives increases the load-carrying capacity of oils for LFBs in rolling mills by 20-25%, depending on viscosity.

Grigor' eva, N.I.; Badyshtova, K.M.; Ivankina, E.B.; Kolobov, N.I.; Toloka, V.I.

1984-07-01T23:59:59.000Z

344

Thermal Ground State in Yang-Mills Thermodynamics  

Science Conference Proceedings (OSTI)

We derive an a useful priori estimate for the thermal ground state of deconfining phase of SU(2) Yang-Mills thermodynamics in four-dimensional, flat spacetime and discuss its implications. Upon a selfconsistent spatial coarse-graining over noninteracting, trivial-holonomy (BPS saturated)(anti)calorons of unit topological charge modulus an inert, adjoint scalar field |{phi}| and an effective pure-gauge configuration a{sub {mu}}{sup gs} emerge. The modulus |{phi}|>0 defines the maximal resolution in the coarse-grained theory and induces dynamical gauge-symmetry breaking. Thanks to perturbative renormalizability and the fact that |{phi}| can not absorb or emit energy-momentum the effective action is local and simple. The temperature dependence of the effective coupling is a consequence of thermodynamical consistency and describes the Coulomb screening of a static test charge due to short-lived monopole-antimonopole pairs. The latter occur unresolvably as small-holonomy excitations of (anti)calorons by the absorption of propagating fundamental gauge fields.

Hofmann, Ralf [ITP, Universitaet Heidelberg, Philosophenweg 16, 69120 Heidelberg (Germany)

2011-09-22T23:59:59.000Z

345

Volume dependence in 2+1 Yang-Mills theory  

E-Print Network (OSTI)

We present the results of an analysis of a 2+1 dimensional pure SU(N) Yang-Mills theory formulated on a 2-dimensional spatial torus with non-trivial magnetic flux. We focus on investigating the dependence of the electric-flux spectrum, extracted from Polyakov loop correlators, with the spatial size l, the number of colours N, and the magnetic flux m. The size of the torus acts a parameter that allows to control the onset of non-perturbative effects. In the small volume regime, where perturbation theory holds, we derive the one-loop self-energy correction to the single-gluon spectrum, for arbitrary N and m. We discuss the transition from small to large volumes that has been investigated by means of Monte-Carlo simulations. We argue that the energy of electric flux e, for the lowest gluon momentum, depends solely on e/N and on the dimensionless variable x=lambda N l, with lambda the 't Hooft coupling. The variable x can be interpreted as the dimensionless 't Hooft coupling for an effective box size given by Nl. This implies a version of reduction that allows to trade l by N without modifying the electric-flux energy.

Margarita Garcia Perez; Antonio Gonzalez-Arroyo; Masanori Okawa

2012-11-05T23:59:59.000Z

346

Uranium Mill Tailings Remedial Action Project 1994 environmental report  

Science Conference Proceedings (OSTI)

This annual report documents the Uranium Mill Tailings Remedial Action (UMTRA) Project environmental monitoring and protection program. The UMTRA Project routinely monitors radiation, radioactive residual materials, and hazardous constituents at associated former uranium tailings processing sites and disposal sites. At the end of 1994, surface remedial action was complete at 14 of the 24 designated UMTRA Project processing sites: Canonsburg, Pennsylvania; Durango, Colorado; Grand Junction, Colorado; Green River Utah, Lakeview, Oregon; Lowman, Idaho; Mexican Hat, Utah; Riverton, Wyoming; Salt Lake City, Utah; Falls City, Texas; Shiprock, New Mexico; Spook, Wyoming, Tuba City, Arizona; and Monument Valley, Arizona. Surface remedial action was ongoing at 5 sites: Ambrosia Lake, New Mexico; Naturita, Colorado; Gunnison, Colorado; and Rifle, Colorado (2 sites). Remedial action has not begun at the 5 remaining UMTRA Project sites that are in the planning stage. Belfield and Bowman, North Dakota; Maybell, Colorado; and Slick Rock, Colorado (2 sites). The ground water compliance phase of the UMTRA Project started in 1991. Because the UMTRA Project sites are.` different stages of remedial action, the breadth of the UMTRA environmental protection program differs from site to site. In general, sites actively undergoing surface remedial action have the most comprehensive environmental programs for sampling media. At sites where surface remedial action is complete and at sites where remedial action has not yet begun, the environmental program consists primarily of surface water and ground water monitoring to support site characterization, baseline risk assessments, or disposal site performance assessments.

NONE

1995-08-01T23:59:59.000Z

347

Biorefinery Concept Development Based On Wheat Flour Milling  

DOE Green Energy (OSTI)

A new process is being developed to extract starch from millfeed, the low-value byproduct of wheat flour milling, and convert it to glucose through enzymatic processing. The millfeed-derived glucose will then be converted to value-added products, such as polyol, through a catalytic process, or lactic acid, through a fermentation process. The starch (glucose) recovery process has been tested through the pilot scale. Catalytic and fermentation processes have been tested in the laboratory. The process developed for glucose recovery from wheat millfeed includes hot water extraction of starch and filtration of a fibrous animal feed coproduct, followed by enzymatic liquefaction and saccharification of the extracted starch, with filtration of a high-protein coproduct. The bench-scale tests showed that a glucose yield of approximately 30% on a dry millfeed basis could be achieved, which corresponds to the recovery of essentially all the glucose value in the millfeed. Glucose yields with the pilot-scale system were comparable, although filtration was more difficult.

Elliott, Douglas C.; Orth, Rick J.; Gao, Johnway; Werpy, Todd A.; Eakin, David E.; Schmidt, Andrew J.; Neuenschwander, Gary G.

2002-04-07T23:59:59.000Z

348

Analytical approach to SU(2) Yang-Mills thermodynamics  

E-Print Network (OSTI)

We propose an analytical approach to SU(2) Yang-Mills thermodynamics. The existence of a macroscopic and rigid adjoint Higgs field, generated by dilute trivial-holonomy calorons at large temperature $T$ (electric phase), implies a twofold degeneracy of the ground state which signals a broken electric $Z_2$ symmetry. A finite energy density $\\propto T$ of the ground state arises due to caloron interaction. An evolution equation for the effective gauge coupling, derived from thermodynamical self-consistency, predicts a second-order like transition (seen in lattice simulations) at $T_c$ to a phase where monopoles are condensed and off-Cartan excitations decoupled. In this magnetic phase the ground state is unique and dominates the pressure (negative total pressure). While the magnetic phase has a massive, propagating 'photon' it confines fundamental matter (pre-confinement). The temperature dependence of the magnetic gauge coupling predicts the transition to the confining phase at $T_C\\sim \\frac{T_c}{1.9}$ where center-vortex loops condense and the 'photon' decouples. We believe that this transition is 'swallowed' by finite-size artefacts in lattice simulations. No thermodynamical connection exists between the confining and the magnetic phase.

Ralf Hofmann

2004-08-10T23:59:59.000Z

349

Join Our Webinar This December on Engaging Students in Energy | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Join Our Webinar This December on Engaging Students in Energy Join Our Webinar This December on Engaging Students in Energy Join Our Webinar This December on Engaging Students in Energy December 5, 2013 - 1:57pm Addthis Inspiring and preparing students to enter tomorrow's energy workforce is critical to the Department of Energy's mission. Inspiring and preparing students to enter tomorrow's energy workforce is critical to the Department of Energy's mission. Andre H. Sayles, Ph.D. Andre H. Sayles, Ph.D. Principal Deputy Director of the Office of Economic Impact and Diversity and Acting Deputy Director of the Office of Minority Business and Economic Development Today's students are tomorrow's energy workforce, a fact that all government leaders, CEOs, and major utility industries know well. The Energy Department's initiatives on engaging students in energy literacy,

350

Department Of Energy Offers $60 Million to Spur Industry Engagement in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Of Energy Offers $60 Million to Spur Industry Engagement Of Energy Offers $60 Million to Spur Industry Engagement in Global Nuclear Energy Partnership Department Of Energy Offers $60 Million to Spur Industry Engagement in Global Nuclear Energy Partnership May 9, 2007 - 12:45pm Addthis WASHINGTON, DC - The U.S. Department of Energy (DOE) Deputy Secretary Clay Sell today announced that DOE will provide up to $60 million, over two years (FY'07-'08), to engage industry experts in the conceptual design of the initial nuclear fuel recycling center and advanced recycling reactor as part of President Bush's Global Nuclear Energy Partnership (GNEP). Studies from this Funding Opportunity Announcement (FOA) will include scope, schedule and cost information of the proposed facilities and will also identify technological needs that will be used to inform, and

351

OECD-Private Sector Engagement in Adaptation to Climate Change | Open  

Open Energy Info (EERE)

OECD-Private Sector Engagement in Adaptation to Climate Change OECD-Private Sector Engagement in Adaptation to Climate Change Jump to: navigation, search Tool Summary Name: OECD-Private Sector Engagement in Adaptation to Climate Change Agency/Company /Organization: Organisation for Economic Co-Operation and Development (OECD) Sector: Climate Topics: Adaptation Resource Type: Publications, Technical report Website: www.oecd-ilibrary.org/docserver/download/fulltext/5kg221jkf1g7.pdf?exp Cost: Free Language: English References: OECD-Private Sector Engagement in Adaptation to Climate Change[1] " There is growing international interest in the planning, financing and implementation of adaptation to climate change. However, the discussion to date has primarily focused on the public sector's role, with the private

352

A Strategy to Engage the Private Sector in Climate Change Adaptation in  

Open Energy Info (EERE)

Strategy to Engage the Private Sector in Climate Change Adaptation in Strategy to Engage the Private Sector in Climate Change Adaptation in Bangladesh Jump to: navigation, search Name A Strategy to Engage the Private Sector in Climate Change Adaptation in Bangladesh Agency/Company /Organization Asian Development Bank, World Bank Topics Adaptation, Finance, Implementation Website http://prod-http-80-800498448. Country Bangladesh UN Region South-Eastern Asia References A Strategy to Engage the Private Sector in Climate Change Adaptation in Bangladesh[1] Overview "There is a growing scientific consensus on the impact of greenhouse gas (GHG) emissions on global warming as well agreement that it is causing increased weather volatility with the effects increasing in intensity in coming years. Warming may induce sudden shifts in regional weather patterns

353

Radon-222 emissions and control practices for licensed uranium mills and their associated tailings piles. Final report  

SciTech Connect

The report is organized into five main sections. The conclusions of the effort are summarized in Chapter 2. A general description of current milling and tailings management practices and a summary of the site-specific characteristics of operating and standby uranium mills are contained in Chapter-3. The sources and emission rates of radon-222 at licensed mills and their associated tailings piles are contained in Chapter 4 along with the results of an effort to develop generic procedures to estimate radon-222 emissions for milling operations and tailings disposal. Control practices that are being or could be applied to the milling operation and tailings disposal areas and their estimated cost and effectiveness in reducing radon-222 emissions are presented in Chapter 5. The appendices contain detailed information on mill site data and emission estimates.

Not Available

1985-06-01T23:59:59.000Z

354

Remedial action plan and site design for stabilization of the inactive uranium mill tailings site at Tuba City, Arizona: Phase 2, Construction, Subcontract documents: Appendix E, final report. [Uranium Mill Tailings Remedial Action (UMTRA) Project  

Science Conference Proceedings (OSTI)

This appendix discusses Phase II construction and subcontract documents uranium mill site near Tuba City, Arizona. It contains the bid schedule, special conditions, specifications, and subcontract drawings.

Not Available

1989-08-01T23:59:59.000Z

355

Energy Analysis of a Kraft Pulp Mill: Potential for Energy Efficiency and Advanced Biomass Cogeneration  

E-Print Network (OSTI)

Energy use at a Kraft pulp mill in the United States is analyzed in detail. Annual average process steam and electricity demands in the existing mill are 19.3 MMBtu per ADST and 687 kWh per ADST, respectively. This is relatively high by industry standards. The mill meets nearly all its electricity needs with a back-pressure steam turbine. Higher electricity to heat ratios is an industry wide trend and anticipated at the mill. The potential for self-sufficiency in energy using only black liquor and bark available on-site is assessed based on the analysis of the present energy situation and potential process changes. The analysis here suggests that steam and electricity demand could be reduced by 89% by operating consistently at high production rates. Process modifications and retrofits using commercially proven technologies could reduce steam and electricity demand to as low as 9.7 MMBtu per ADST, a 50% reduction, and 556 kWh per ADST, a 19% reduction, respectively. Electricity demand could increase to about 640 kWh per ADST due to closed-cycle operation of the bleach plant and other efforts to improve environmental performance. The retrofitted energy efficient mill with low environmental impact could be self-sufficient in steam and electricity using conventional technology, such as a back pressure steam turbine or a condensing extraction steam turbine. In addition to meeting mill energy demand, about 1,000 kWh per ADST would be available for export from the mill if gasification/combined cycle technology were used instead.

Subbiah, A.; Nilsson, L. J.; Larson, E. D.

1995-04-01T23:59:59.000Z

356

Final report: Research project chemical milling of counterbore recesses in the uranium wall of Zircaloy-2 clad uranium tubes  

SciTech Connect

This report discusses the development of an etchant composition to chemically mill counterbore recesses in each end of the uranium walls of Zircaloy-2 clad uranium tubes.

Atkins, D.C. [United States Chemical Milling Corp., Manhattan Beach, CA (United States)

1994-07-01T23:59:59.000Z

357

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporation’s Cañon City, Colorado, Uranium Mill  

Energy.gov (U.S. Department of Energy (DOE))

Performance Assessment and Recommendations for Rejuvenation of a Permeable Reactive Barrier: Cotter Corporation’s Canon City, Colorado, Uranium Mill (April 2005)

358

Annual status report on the Uranium Mill Tailings Remedial Action Program  

SciTech Connect

This fourteenth annual status report for the Uranium Mill Tailings Remedial Action (UMTRA) Project Office summarizes activities of the Uranium Mill Tailings Remedial Action Surface (UMTRA-Surface) and Uranium Mill Tailings Remedial Action Groundwater (UMTRA-Groundwater) Projects undertaken during fiscal year (FY) 1992 by the US Department of Energy (DOE) and other agencies. Project goals for FY 1993 are also presented. An annual report of this type was a statutory requirement through January 1, 1986, pursuant to the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law (PL) 95-604. The DOE will continue to submit annual reports to DOE-Headquarters, the states, tribes, and local representatives through Project completion in order to inform the public of the yearly Project status. The purpose of the remedial action is to stabilize and control the tailings and other residual radioactive material (RRM) located on the inactive uranium processing sites in a safe and environmentally sound manner, and to minimize or eliminate potential health hazards. Commercial and residential properties near designated processing sites that are contaminated with material from the sites, herein referred to as ``vicinity properties (VP),`` are also eligible for remedial action. Included in the UMTRA Project are 24 inactive uranium processing sites and associated VPs located in 10 states, and the VPs associated with the Edgemont, South Dakota, uranium mill currently owned by the Tennessee Valley Authority (TVA) (Figure A.1, Appendix A).

Not Available

1992-12-01T23:59:59.000Z

359

Asymptotically Free Yang-Mills Classical Mechanics with Self-Linked Orbits  

E-Print Network (OSTI)

We construct a classical mechanics Hamiltonian which exhibits spontaneous symmetry breaking akin the Coleman-Weinberg mechanism, dimensional transmutation, and asymptotically free self-similarity congruent with the beta-function of four dimensional Yang-Mills theory. Its classical equations of motion support stable periodic orbits and in a three dimensional projection these orbits are self-linked into topologically nontrivial, toroidal knots. The non-perturbative structure of four dimensional Yang-Mills theory continues to be the subject of extensive investigations. A major goal is the understanding of large distance properties such as color confinement, mass gap and the glueball spectrum. The Yang-Mills theory has also a number of well established salient features like ultraviolet asymptotic freedom and the presence of finite action instantons. Here we shall introduce a classical mechanics Hamiltonian which contains many incredients of the four dimensional Yang-Mills field theory, even though it is defined in a four dimensional phase space. These include asymptotically free self-similarity with a coupling constant that flows like the one loop coupling constant of four dimensional Yang-Mills theory, dimensional transmutation, and spontaneous symmetry breaking akin the Coleman-Weinberg mechanism. Furthermore, we find that its Hamilton’s equations support stable periodic

M. Lübcke; A. J. Niemi; K. Torokoff

2008-01-01T23:59:59.000Z

360

Optimizing the Utility System of a Tissue Paper Mill Using Pinch Technology  

E-Print Network (OSTI)

A tissue paper mill in southern California had existing utility demands of 7.1 MW for the tissue mill (13 MW for the whole site), and 55 MM Btu/hr of fuel gas for the steam boiler. Total utility costs were $12 MM per year. The mill was seriously considering an 11 MW cogeneration system as a means of reducing operating costs. The expected benefits of the cogeneration project were $5.5 MM/yr of savings for an investment of $9 MM. A "pinch" study of the mill was initiated by SCE, with the customer's consent, to explore viable alternative projects that would result in comparable savings at equal or better payback and lower risk. The study identified a group of ten inter-related projects, including process heat recovery, a waste heat boiler and a 2.5 MW gas turbine. Combined savings were $4.5 MM/yr (37% of existing bill) at an estimated capital cost of $6.6 MM. The recommended approach was considered more attractive by the paper mill than the original plan because: (a) the benefits were obtained in a number of different areas -reduced fuel use, reduced power cost, reduced water makeup, reduced wastewater discharge to sewer, and reduced solid wastes to landfill (b) the smaller projects involved lower technical and economic risk, and were easier to implement.

Kumana, J. D.; Sung, R. D.

1989-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Preliminary assessment of off-season fuels for electricity generation at Indian sugar mills  

DOE Green Energy (OSTI)

This report on off-season fuels is part of a preliminary feasibility assessment to retrofit Indian sugar mills to cogenerate heat and power with sales of excess electricity to the local grid. To justify the high capital costs of retrofitting existing facilities, sugar mill operators must attempt to maximize the amount of power they sell to the local grid. This fact means that sugar mills must operate and sell power well-beyond the milling season, which typically lasts about 200 days. The purpose of this report is to assess and determine whether low cost and reliable sources of off-season fuels can be secured for two sugar mills (Simbhaoli and Daurala) within their respective sugar growing districts, located in western Uttar Pradesh. Off-season fuels under consideration include excess bagasse that is stored for off-season use, agricultural field residues (e.g., wheat straw), forest residues (e.g., bark and small limbs), and dedicated energy crops (short-rotation woody crops and herbaceous energy crops). Results of the pre-feasibility indicate that bagasse and some agricultural residues are available in sufficient quantity and may be available at reasonable cost.

Perlack, R.D. [Oak Ridge National Lab., TN (United States); Ranney, J.W. [Joint Inst. for Energy and Environment, Knoxville, TN (United States)

1995-11-07T23:59:59.000Z

362

Similarities and differences in the microstructure of attritor-milled Fe-Al-N compositions  

Science Conference Proceedings (OSTI)

Although numerous studies of high-energy, ball-milled metal powders have been conducted, to date few studies have characterized the mechanical processing of identical elemental compositions of prealloyed powders and of powder blends. This study reports on the mechanical processing (attritor ball milling) in argon and nitrogen gas environments of (a) iron powder and prealloyed iron–2 wt.% aluminum powder, and (b) iron-aluminum, iron-aluminum nitride, and iron-iron nitride powder blends. When nitrogen was milled into iron particles either from nitride powder or by gas infusion, the nitrogen dissolved interstitially in bcc-Fe (principally at the grain boundaries) or was present as bct-Fe nanoparticles at the bcc-Fe nanograin boundaries. The resulting nitrogen distribution was independent of how the nitrogen was added. Milled blends of iron and aluminum powder and prealloyed iron-aluminum powder resulted in similar microstructures: micrometer size particles with similar nanograin size. The aluminum in the blended powder mixture developed an ultrafine distribution on the grain boundaries, but it did not become uniformly distributed within the bcc-Fe grains. In contrast, the aluminum in prealloyed Fe–Al powder remained in solid solution during the mechanical milling.

Rawers, J.C.; Cook, D.C. (Old Dominion U., Norfolk, VA)

1997-04-01T23:59:59.000Z

363

Moab Project Disposes 2 Million Tons of Uranium Mill Tailings with Recovery Act Funds  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

The Moab Uranium Mill Tailings Remedial Action The Moab Uranium Mill Tailings Remedial Action Project reached its primary American Recovery and Reinvestment Act milestone ahead of schedule on Wednesday with the disposal of 2 million tons of uranium mill tailings. The project had originally planned to ship 2 million tons of tailings with Recovery Act funds. Now, Recovery Act workers are surpass- ing that goal. "Although shipping 2 million tons was the original Recovery Act goal, we are planning to exceed this goal by shipping about 300,000 tons more using savings resulting from efficiencies we've gained in our first 2 years of moving tailings," Moab Federal Project Director Donald Metzler said. The project is using $108 million from the Recovery Act to move the tailings from the banks of the Colorado River by rail to a permanent

364

Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1  

Office of Legacy Management (LM)

Monticello Mill Tailings Site Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendum1 Focused Feasibility Study January 2004 Prepared by U.S. Department of Energy Grand Junction, Colorado Work performed under DOE Contract No. DE-AC1342GJ79491 DOE Task Order No. ST03-205 Document N u m b e r Q0029500 S i g t ~ a t u r e Page Signature Page Monticello Mill Tailings Site Operable Unit I11 Remedial Investigation Addendud Focused Feasibility Study January 2004 Submitted By: Arthur W. Kleinrath, Project Manager U.S. Department of Energy, Grand Junction, Colorado U.S. Department of Energyat Gmnd Junction MMTS OU 111 Remedial Investigation AddendutdFocuscd Feasibilily Study January 2004 Final iii This page intentionally left blank Document Number Q0029500 Contents U.S. Department of Energy at Grand Junction MMTS OU III Remedial Investigation Addendum/Focused Feasibility Study

365

Scientific basis for risk assessment and management of uranium mill tailings  

Science Conference Proceedings (OSTI)

A National Research Council study panel, convened by the Board on Radioactive Waste Management, has examined the scientific basis for risk assessment and management of uranium mill tailings and issued this final report containing a number of recommendations. Chapter 1 provides a brief introduction to the problem. Chapter 2 examines the processes of uranium extraction and the mechanisms by which radionuclides and toxic chemicals contained in the ore can enter the environment. Chapter 3 is devoted to a review of the evidence on health risks associated with radon and its decay products. Chapter 4 provides a consideration of conventional and possible new technical alternatives for tailings management. Chapter 5 explores a number of issues of comparative risk, provides a brief history of uranium mill tailings regulation, and concludes with a discussion of choices that must be made in mill tailing risk management. 211 refs., 30 figs., 27 tabs.

Not Available

1986-01-01T23:59:59.000Z

366

Radiological survey of the inactive uranium-mill tailings at Rifle, Colorado  

Science Conference Proceedings (OSTI)

Results of radiological surveys of two inactive uranium-mill sites near Rifle, Colorado, in May 1976 are presented. These sites are referred to as Old Rifle and New Rifle. The calculated /sup 226/Ra inventory of the latter site is much higher than at the older mill location. Data on above-ground measurements of gamma exposure rates, surface and near-surface concentration of /sup 226/Ra in soil and sediment samples, concentration of /sup 226/Ra in water, calculated subsurface distribution of /sup 226/Ra, and particulate radionuclide concentrations in air samples are given. The data serve to define the extent of contamination in the vicinity of the mill sites and their immediate surrounding areas with tailings particles. Results of these measurements were utilized as technical input for an engineering assessment of these two sites.

Haywood, F.F.; Jacobs, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

367

Assessment of the radiological impact of the inactive uranium-mill tailings at Mexican Hat, Utah  

SciTech Connect

High surface soil concentrations of /sup 226/Ra and high above-ground measurements of gamma-ray intensity in the vicinity of the inactive uranium-mill tailings at Mexican Hat show both wind and water erosion of the tailings. The former mill area, occupied by a trade school at the time of this survey, shows a comparatively high level of contamination, probably from unprocessed ore on the surface of the ore storage area near the location of the former mill buildings. However, the estimated health effect of exposure to gamma rays during a 2000-hr work year in the area represents an increase of 0.1% in the risk of death from cancer. Exposure of less than 600 persons within 1.6 km of the tailings to radon daughters results in an estimated 0.2%/year increase in risk of lung cancer.

Haywood, F.F.; Goldsmith, W.A.; Ellis, B.S.; Hubbard, H.M. Jr.; Fox, W.F.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

368

Higgs potential and confinement in Yang-Mills theory on exotic R^4  

E-Print Network (OSTI)

We show that pure SU(2) Yang-Mills theory formulated on certain exotic R^4 from the radial family shows confinement. The condensation of magnetic monopoles and the qualitative form of the Higgs potential are derived from the exotic R^4, e. A relation between the Higgs potential and inflation is discussed. Then we obtain a formula for the Higgs mass and discuss a particular smoothness structure so that the Higgs mass agrees with the experimental value. The singularity in the effective dual U(1) potential has its cause by the exotic 4-geometry and agrees with the singularity in the maximal abelian gauge scenario. We will describe the Yang-Mills theory on e in some limit as the abelian-projected effective gauge theory on the standard R^4. Similar results can be derived for SU(3) Yang-Mills theory on an exotic R^4 provided dual diagonal effective gauge bosons propagate in the exotic 4-geometry.

Torsten Asselmeyer-Maluga; Jerzy Król

2013-03-07T23:59:59.000Z

369

SURFACE GENERATION ANALYSIS IN MICRO END-MILLING CONSIDERING THE INFLUENCES OF GRAIN  

E-Print Network (OSTI)

Micro end-milling method is a universal micro manufacturing method, which can be used to fabricating complex 3D structures and parts with many materials. But compared with their micrometer order size, their surface roughness quality is not satisfied. In this paper, the different metal phase grains influences are researched, and the micro end-milling process is described while the material is anisotropic. In this paper, the physical characteristics of different grains, especially friction coefficient ? and elastic module E, are very critical to determine the chip formation process and surface generation. The chip is often discontinues because of the grain boundary effect. Through the micro end-milling experiment, the bottom surface results correlate very well with the theory analysis. 1.

Jinsheng Wang

2008-01-01T23:59:59.000Z

370

Swarming, Schooling, Milling: Phase diagram of a data-driven fish school model  

E-Print Network (OSTI)

We determine the basic phase diagram of the fish school model derived from data by Gautrais etal (PLoS Comp. Biol. 8, e1002678 (2012)), exploring its parameter space beyond the parameter values determined experimentally on groups of barred flagtails (Kuhlia mugil}) swimming in a shallow tank. A modified model is studied alongside the original one, in which an additional frontal preference is introduced in the stimulus/response function to account for the angular weighting of interactions. Our study, mostly limited to groups of moderate size (in the order of 100 individuals), focused not only on the transition to schooling induced by increasing the swimming speed, but also on the conditions under which a school can exhibit milling dynamics and the corresponding behavioral transitions. We show the existence of a transition region between milling and schooling, in which the school exhibits multistability and intermittency between schooling and milling for the same combination of individuals parameters. We also s...

Calovi, Daniel S; Ngo, Sandrine; Sire, Clément; Chaté, Hugues; Theraulaz, Guy

2013-01-01T23:59:59.000Z

371

DOE Awards Contract for Moab Mill Tailings Cleanup | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Moab Mill Tailings Cleanup Moab Mill Tailings Cleanup DOE Awards Contract for Moab Mill Tailings Cleanup November 4, 2011 - 12:00pm Addthis Media Contact Bill Taylor bill.taylor@srs.gov 803-952-8564 Cincinnati- The Department of Energy (DOE) announced today that it has awarded a competitive small business contract worth $121.2 million over the next five years as part of the Department's continued efforts to protect the Colorado River and downstream water users by removing uranium tailings at the former Atlas uranium-ore processing facility in Moab, Utah. Portage, Inc., a small business based in Idaho Falls, Idaho, will be leading the new contract. "The Moab project has the potential of being one of the Department of Energy's most successful environmental cleanup projects," Donald

372

Pulp and Paper Mills: Profiting for Efficient Motor System Use | ENERGY  

NLE Websites -- All DOE Office Websites (Extended Search)

Pulp and Paper Mills: Profiting for Efficient Motor System Use Pulp and Paper Mills: Profiting for Efficient Motor System Use Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

373

Microsoft Word - PS-MST-MILLING-2012-05-22.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

71.doc 1 (03/2012) 71.doc 1 (03/2012) BROOKHAVEN NATIONAL LABORATORY MACHINE SHOP SAFE WORK PRACTICES EVALUATION FORM Dept./Div.: PS______ Machine: PhoSci MSJPM Milling Machine (PS-MST-MILLING) Machine Shop Supervisor's Name(s): Employee Name: _________________________________ Life Number: Competencies Date Completed Evaluated By (Initials) Comments 1. State BNL policy for use of eye protection in machine shops. 2. Identify main disconnect for tool and explain the requirement for access to it. 3. Identify all controls and describe their functions. 4. Identify all machine guards and describe their functions. 5. Explain the process when defects are found. 6. Demonstrate safe work practices while performing

374

311221," Wet Corn Milling",0,0,"X",0  

U.S. Energy Information Administration (EIA) Indexed Site

3 Relative Standard Errors for Table 11.3;" 3 Relative Standard Errors for Table 11.3;" " Unit: Percents." " "," ",,,"Renewable Energy" " "," ",,,"(excluding Wood" "NAICS"," ","Total Onsite",,"and" "Code(a)","Subsector and Industry","Generation","Cogeneration(b)","Other Biomass)(c)","Other(d)" ,,"Total United States" 311,"Food",2.8,1.1,86.8,37.8 3112," Grain and Oilseed Milling",0.7,0.7,"X",0 311221," Wet Corn Milling",0,0,"X",0 31131," Sugar Manufacturing",0,0,"X",0 3114," Fruit and Vegetable Preserving and Specialty Foods ",1.2,1.2,"X",44.1

375

Vibration mills in the manufacturing technology of slurry fuel from unbeneficiated coal sludge  

Science Conference Proceedings (OSTI)

Coal-water slurry fuel (CWSF) is economically viable provided that its ash content does not exceed 30% and the amount water in the fuel is at most 45%. Two impoundments were revealed that have considerable reserves of waste coal useful for commercial manufacture of CWSF without the beneficiation step. One of the CWSF manufacture steps is the comminution of coal sludge to have a particle size required by the combustion conditions. Vibration mills, which are more compact and energy-intensive that drum mills, can be used in the CWSG manufacture process. The rheological characteristics of CWSF obtained from unbeneficiated waste coal were determined.

E.G. Gorlov; A.I. Seregin; G.S. Khodakov [Institute for Fossil Fuels, Moscow (Russia)

2008-08-15T23:59:59.000Z

376

Optimal Cluster Mill Pass Scheduling With an Accurate and Rapid New Strip Crown Model  

Science Conference Proceedings (OSTI)

Besides the requirement to roll coiled sheet at high levels of productivity, the optimal pass scheduling of cluster-type reversing cold mills presents the added challenge of assigning mill parameters that facilitate the best possible strip flatness. The pressures of intense global competition, and the requirements for increasingly thinner, higher quality specialty sheet products that are more difficult to roll, continue to force metal producers to commission innovative flatness-control technologies. This means that during the on-line computerized set-up of rolling mills, the mathematical model should not only determine the minimum total number of passes and maximum rolling speed, it should simultaneously optimize the pass-schedule so that desired flatness is assured, either by manual or automated means. In many cases today, however, on-line prediction of strip crown and corresponding flatness for the complex cluster-type rolling mills is typically addressed either by trial and error, by approximate deflection models for equivalent vertical roll-stacks, or by non-physical pattern recognition style models. The abundance of the aforementioned methods is largely due to the complexity of cluster-type mill configurations and the lack of deflection models with sufficient accuracy and speed for on-line use. Without adequate assignment of the pass-schedule set-up parameters, it may be difficult or impossible to achieve the required strip flatness. In this paper, we demonstrate optimization of cluster mill pass-schedules using a new accurate and rapid strip crown model. This pass-schedule optimization includes computations of the predicted strip thickness profile to validate mathematical constraints. In contrast to many of the existing methods for on-line prediction of strip crown and flatness on cluster mills, the demonstrated method requires minimal prior tuning and no extensive training with collected mill data. To rapidly and accurately solve the multi-contact problem and predict the strip crown, a new customized semi-analytical modeling technique that couples the Finite Element Method (FEM) with classical solid mechanics was developed to model the deflection of the rolls and strip while under load. The technique employed offers several important advantages over traditional methods to calculate strip crown, including continuity of elastic foundations, non-iterative solution when using predetermined foundation moduli, continuous third-order displacement fields, simple stress-field determination, and a comparatively faster solution time.

Malik, Arif S.; Grandhi, Ramana V. [Dept. of Mechanical Engineering, Wright State University, 3640 Col. Glenn Hwy., Dayton, OH 45435 (United States); Zipf, Mark E. [Intergrated Industrial Systems, Inc., 475 Main St., Yalesville, CT 06492 (United States)

2007-05-17T23:59:59.000Z

377

The S-matrix and graviton self-energy in quantum Yang-Mills gravity  

E-Print Network (OSTI)

The S-matrix, its unitarity and the graviton self-energy at the one-loop level are discussed on the basis of quantum Yang-Mills gravity with the translational gauge symmetry in flat space-time. The unitarity and gauge invariance of the S-matrix in a class of gauge conditions is preserved by massless ghost vector particles, called `Feynman-DeWitt-Mandelstam' (FDM) ghosts, in quantum Yang-Mills gravity. Using dimensional regularization, the graviton self-energy are explicitly calculated with a general gauge condition. The resultant divergence of graviton self-energy at the one-loop level resembles to that in quantum electrodynamics.

Jong-Ping Hsu; Sung Hoon Kim

2012-10-16T23:59:59.000Z

378

Field and modeling study of windblown particles from a uranium mill tailings pile  

SciTech Connect

An extensive field study whose primary objective was to obtain knowledge and understanding of the nature and quantity of windblown particles from uranium mill tailings piles was conducted in the Ambrosia Lake District of New Mexico. The following major field tasks were undertaken: determination of physical, chemical, and radioactivity characteristics of mill tailings particles; an investigation of the nature and quantity of tailings particles in soil in the vicinity of tailings piles; and the determination of the nature and flux of particles being transported by wind as a function of wind speed and height. Results of the field study are presented. Particle size distributions and associated radioactivity were measured.

Schwendiman, L.C.; Sehmel, G.A.; Horst, T.W.; Thomas, C.W.; Perkins, R.W.

1980-06-01T23:59:59.000Z

379

Pinch Analysis Process Energy Integration Study of Slocan Fibreco Pulp Mill  

Science Conference Proceedings (OSTI)

This report presents the results of a Pinch analysis study undertaken at the Slocan Fibreco Pulp mill. The study's objective is to draw a global strategic plan of action aiming at the cost minimization of the mill's thermal energy usage. This has been achieved with the help of a well-proven process — energy integration technique called Pinch analysis, an approach that is particularly suitable to identify cost-effective solutions from a global perspective of the whole process. A 2-year maximum direc...

2005-02-04T23:59:59.000Z

380

Uranium Mill Tailings Remedial Action (UMTRA) Surface Project: Project plan. Revision 1  

Science Conference Proceedings (OSTI)

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) [Public Law (PL) 95-604, 42 United States Code (USC) 7901], hereinafter referred to as the ``Act,`` authorizes the US Department of Energy (DOE) to stabilize and control surface tailings and ground water contamination. To fulfill this mission, the DOE has established two projects under the Uranium Mill Tailings Remedial Action (UMTRA) Project Office. The Ground Water Project was established in April 1991 as a major project and a separate project plan will be prepared for that portion of the mission. This project plan covers the UMTRA Surface Project, a major system acquisition (MSA).

Not Available

1993-08-11T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Atmospheric emissions of one pulp and paper mill. contribution to the air quality of Viana do Castelo  

Science Conference Proceedings (OSTI)

One of the most sensitive environmental impact of the pulp and paper mills is associated with the atmospheric pollution namely with sulphur compounds, particulate matter and nitrogen oxides. The study undertaken aimed to evaluate the influence of one ... Keywords: air pollution modelling, kraft pulp and paper mill, urban air pollution

Lígia T. Silva; José F. G. Mendes

2009-10-01T23:59:59.000Z

382

A Low-Noise, Microprocessor-Controlled, Internally Digitizing Rotating-Vane Electric Field Mill for Airborne Platforms  

Science Conference Proceedings (OSTI)

This paper reports on a new generation of aircraft-based rotating-vane-style electric field mills designed and built at NASA’s Marshall Space Flight Center. The mills have individual microprocessors that digitize the electric field signal at the ...

M. G. Bateman; M. F. Stewart; S. J. Podgorny; H. J. Christian; D. M. Mach; R. J. Blakeslee; J. C. Bailey; D. Daskar

2007-07-01T23:59:59.000Z

383

At the White House, Engaging in a Dialogue on Diversity and Energy |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

At the White House, Engaging in a Dialogue on Diversity and Energy At the White House, Engaging in a Dialogue on Diversity and Energy At the White House, Engaging in a Dialogue on Diversity and Energy November 14, 2013 - 12:41pm Addthis Secretary Moniz, Ambassadors of the Minorities in Energy Initiative, and panelists attend the White House Forum on Minorities in Energy. View additional photos from the event by checking out our latest slideshow. | Photo by Matty Greene, Energy Department. Secretary Moniz, Ambassadors of the Minorities in Energy Initiative, and panelists attend the White House Forum on Minorities in Energy. View additional photos from the event by checking out our latest slideshow. | Photo by Matty Greene, Energy Department. Erin R. Pierce Erin R. Pierce

384

New Ways to Stay Engaged on Energy.gov | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Ways to Stay Engaged on Energy.gov New Ways to Stay Engaged on Energy.gov New Ways to Stay Engaged on Energy.gov September 24, 2013 - 5:49pm Addthis The Energy Departments headquarters at the Forrestal Building in Washington, DC. | Energy Department photo, credit Quentin Kruger. The Energy Departments headquarters at the Forrestal Building in Washington, DC. | Energy Department photo, credit Quentin Kruger. Erin R. Pierce Erin R. Pierce Digital Communications Specialist, Office of Public Affairs Every day on Energy.gov, we strive to provide you with the latest updates on how the Energy Department is meeting its mission. From innovative research at our National Labs to progress in advancing the Presidents climate agenda, Energy.gov online content is part of our ongoing commitment to share who we are, what we do and why it matters to you.

385

New Ways to Stay Engaged on Energy.gov | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Ways to Stay Engaged on Energy.gov Ways to Stay Engaged on Energy.gov New Ways to Stay Engaged on Energy.gov September 24, 2013 - 5:49pm Addthis The Energy Departments headquarters at the Forrestal Building in Washington, DC. | Energy Department photo, credit Quentin Kruger. The Energy Departments headquarters at the Forrestal Building in Washington, DC. | Energy Department photo, credit Quentin Kruger. Erin R. Pierce Erin R. Pierce Digital Communications Specialist, Office of Public Affairs Every day on Energy.gov, we strive to provide you with the latest updates on how the Energy Department is meeting its mission. From innovative research at our National Labs to progress in advancing the Presidents climate agenda, Energy.gov online content is part of our ongoing commitment to share who we are, what we do and why it matters to you.

386

LWRS II&C Industry and Regulatory Engagement Activities for FY 11  

Science Conference Proceedings (OSTI)

To ensure broad industry support and coordination for the Advanced Instrumentation, Information, and Controls (II&C) Systems Technologies research pathway, an engagement process will be continually pursued with nuclear asset owners, vendors, and suppliers, Nuclear Regulatory Commission (NRC), and the major industry support organizations of Electric Power Research Institute (EPRI), Institute of Nuclear Power Operations (INPO), and Nuclear Energy Institute (NEI). Nuclear asset owner engagement is a necessary and enabling activity to obtain data and accurate characterization of long-term operational challenges, assess the suitability of proposed research for addressing long-term needs, and gain access to data and representative infrastructure and expertise needed to ensure success of the proposed research and development (R&D) activities. Engagement with vendors and suppliers will ensure that vendor expectations and needs can be translated into requirements that can be met through technology commercialization.

Ken Thomas

2011-09-01T23:59:59.000Z

387

Tool fabrication system for micro/nano milling—function analysis and design of a six-axis Wire EDM machine  

E-Print Network (OSTI)

fabrication system for micro/nano milling—function analysisselected. Keywords Micro/nano milling . Wire EDM . FunctionJapan 1 Introduction Micro/nano machining is requisite by

Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

2010-01-01T23:59:59.000Z

388

Progress Towards Optimizing the PETSc Numerical Toolkit on the Richard Tran Mills, Eduardo F. D'Azevedo, and Mark R. Fahey  

E-Print Network (OSTI)

Progress Towards Optimizing the PETSc Numerical Toolkit on the Cray X1 Richard Tran Mills, Eduardo-implicit code for multiphase groundwater (Darcy) flow and reactive transport coauthored by Richard Mills performance tests. About the authors Richard Tran Mills is a Computational Scientist at the Center

389

Hidden symmetries induced by a canonical transformation and gauge structure of compactified Yang-Mills theories  

E-Print Network (OSTI)

Compactified Yang-Mills theories with one universal extra dimension were found [arXiv:1008.4638] to exhibit two types of gauge invariances: the standard gauge transformations (SGTs) and the nonstandard gauge transformations (NSGTs). In the present work we show that these transformations are not exclusive to compactified scenarios. Introducing a notion of hidden symmetry, based on the fundamental concept of canonical transformation, we analyse three different gauge systems, each of which is mapped to a certain effective theory that is invariant under the so-called SGTs and NSGTs. The systems under discussion are: (i) four dimensional pure $SU(3)$ Yang-Mills theory, (ii) four dimensional $SU(3)$ Yang-Mills with spontaneous symmetry breaking, and (iii) pure Yang-Mills theory with one universal compact extra dimension. The canonical transformation, that induces the notion of hidden symmetry, maps objects with well defined transformation laws under a gauge group $G$ to well defined objects under a non-trivial subgroup $H \\subset G$. In the case where spontaneous symmetry breaking is present, the set of SGTs corresponds to the group into which the original gauge group is broken into, whereas the NSGTs are associated to the broken generators and can be used to define the unitary gauge. For the system (iii), the SGTs coincide with the gauge group $ SU(N,\\cal{M}^{4}) $, whereas the NSGTs do not form a group; in this system the 'fundamental' theory and the effective one are shown to be classically equivalent.

M. A. López-Osorio; E. Martínez-Pascual; H. Novales-Sánchez; J. J. Toscano

2013-02-13T23:59:59.000Z

390

A traceability system incorporating 2D barcode and RFID technology for wheat flour mills  

Science Conference Proceedings (OSTI)

Wheat flour undergoes several processing steps in its transformation from raw wheat in the mill, which differentiates wheat flour from other farm products. At each step, various wheat sources are combined into one batch of wheat flour. This study primarily ... Keywords: 2D barcode, RFID, Supply chain, Traceability, Wheat flour

Jian-Ping Qian; Xin-Ting Yang; Xiao-Ming Wu; Li Zhao; Bei-Lei Fan; Bin Xing

2012-11-01T23:59:59.000Z

391

Gravity as the square of Yang-Mills: implications for N=8 Supergravity  

E-Print Network (OSTI)

The pure gravity Lagrangian can be written as the "square" of the pure Yang-Mills Lagrangian to second order in coupling constants. This paper uses this form of the gravity Lagrangian as a starting point to arrive at a compact light-cone superspace Lagrangian for N=8 Supergravity to order $\\kappa$^2.

Sudarshan Ananth

2009-02-18T23:59:59.000Z

392

KEYNOTE SPEAKER: Gary Petersen, Director of Transportation, General Mills 8th Annual Freight and Logistics Symposium  

E-Print Network (OSTI)

the future of the freight industry--from trucking to rail, air, and marine transport--at the 8th Annual included the changing landscape of transportation, public- and private-sector views of the futureKEYNOTE SPEAKER: Gary Petersen, Director of Transportation, General Mills 8th Annual Freight

Minnesota, University of

393

Radiological survey of the inactive uranium-mill tailings at Ambrosia Lake, New Mexico  

Science Conference Proceedings (OSTI)

The inactive uranium-mill tailings pile at Ambrosia Lake, New Mexico, contains approximately 1520 Ci of /sup 226/Ra in 2.4 million metric tons of tailings covering an area of 43 hectares. All of the former mill buildings were intact and, at the time of this survey, several were in use. The tailings have not been stabilized, but the crusty surface is reported to be resistant to wind erosion. The average gamma-ray exposure rate 1 m above the tailings is 720 ..mu..R/h while the average rate in the former mill area is 150 ..mu..R/h. The adjacent area, between the mill site, ponds, and tailings pile, has an average exposure rate of 230 ..mu..R/h. Gamma radiation measurements outside these areas, as well as the results of analyses of surface or near-surface sediment and soil samples, show fairly wide dispersion of contamination around the site. The subsurface distribution of /sup 226/Ra in 18 holes drilled at the site, calculated from gamma-ray monitoring data, is presented graphically and compared with measured concentrations in two holes.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Lorenzo, D.; Shinpaugh, W.H.

1980-06-01T23:59:59.000Z

394

Environmental assessment of remedial action at the Slick Rock uranium mill tailings sites, Slick Rock, Colorado  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978, hereafter referred to as the UMTRCA, authorized the US Department of Energy (DOE) to clean up two uranium mill tailings processing sites near Slick Rock, Colorado, in San Miguel County. The purpose of the cleanup is to reduce the potential health effects associated with the radioactive materials remaining on the processing sites and on vicinity properties (VPs) associated with the sites. The US Environmental Protection Agency (EPA) promulgated standards for the UMTRCA that contained measures to control the contaminated materials and to protect the ground water from further degradation. The sites contain concrete foundations of mill buildings, tailings piles, and areas contaminated by windblown and waterborne radioactive tailings materials. The proposed action is to remediate the UC and NC sites by removing all contaminated materials within the designated site boundaries or otherwise associated with the sites, and relocating them to, and stabilizing them at, a location approximately 5 road mi (8 km) northeast of the processing sites on land administered by the US Bureau of Land Management (BLM). Remediation would be performed by the DOE`s Uranium Mill Tailings Remedial Action (UMTRA) Project.

NONE

1995-01-01T23:59:59.000Z

395

Role of the inclusion survey contractor in the Uranium Mill Tailings Remedial Action Program  

Science Conference Proceedings (OSTI)

Twenty-four former uranium mills are involved in the Department of Energy's Uranium Mill Tailings Remedial Action Program (UMTRAP). The Radiological Survey Activities project at Oak Ridge National Laboratory serves as the Inclusion Survey Contractor (ISC) in the UMTRA program. Responsibilities of the ISC are: (1) to identify potentially contaminated sites in the vicinity of these former uranium mills; (2) conduct radiological surveys to assess whether the property is contaminated with material originating from the mill in excess of Environmental Protection Agency criteria formulated specifically for the UMTRA program (40 CFR 192); and (3) provide recommendations to DOE regarding remedial action. Properties are identified by the ISC using historical information, serial and ground-level gamma scanning, and surveying erosional pathways (wind and water movement of contamination from primary sources). Currently, over 8000 vicinity properties have been identified that warrant further investigation. Once identified, an inclusion survey is conducted to assess whether a property is sufficiently contaminated to warrant inclusion into the UMTRA program. The inclusion survey includes a complete gamma scan of the surfaces of the property outdoors and the lowest habitable level indoors, and collection of soil samples outdoors and/or radon daughter samples indoors if required. Survey methods are described. 8 references.

Berven, B.A.; Little, C.A.

1985-01-01T23:59:59.000Z

396

Programmatic Environmental Report for remedial actions at UMTRA (Uranium Mill Tailings Remedial Action) Project vicinity properties  

Science Conference Proceedings (OSTI)

This Environmental Report (ER) examines the environmental consequences of implementing a remedial action that would remove radioactive uranium mill tailings and associated contaminated materials from 394 vicinity properties near 14 inactive uranium processing sites included in the Uranium Mill Tailings Remedial Action (UMTRA) Project pursuant to Public Law 95--604, the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978. Vicinity properties are those properties in the vicinity of the UMTRA Project inactive mill sites, either public or private, that are believed to be contaminated by residual radioactive material originating from one of the 14 inactive uranium processing sites, and which have been designated under Section 102(a)(1) of UMTRCA. The principal hazard associated with the contaminated properties results from the production of radon, a radioactive decay product of the radium contained in the tailings. Radon, a radioactive gas, can diffuse through the contaminated material and be released into the atmosphere where it and its radioactive decay products may be inhaled by humans. A second radiation exposure pathway results from the emission of gamma radiation from uranium decay products contained in the tailings. Gamma radiation emitted from contaminated material delivers an external exposure to the whole body. If the concentration of radon and its decay products is high enough and the exposure time long enough, or if the exposure to direct gamma radiation is long enough, cancers (i.e., excess health effects) may develop in persons living and working at the vicinity properties. 3 refs., 7 tabs.

Not Available

1985-03-01T23:59:59.000Z

397

Radiological survey of the inactive uranium-mill tailings at Green River, Utah  

SciTech Connect

The uranium-mill tailings at Green River, Utah, are relatively low in /sup 226/Ra content and concentration (20 Ci and 140 pCi/g, respectively) because the mill was used to upgrade the uranium ore by separating the sand and slime fractions; most of the radium was transported along with the slimes to another mill site. Spread of tailings was observed in all directions, but near-background gamma exposure rates were reached at distances of 40 to 90 m from the edge of the pile. Water erosion of the tailings is evident and, since a significant fraction of the tailings pile lies in Brown's Wash, the potential exists for repetition of the loss of a large quantity of tailings such as occurred during a flood in 1959. In general, the level of surface contamination was low at this site, but some areas in the mill site, which were being used for nonuranium work, have gamma-ray exposure rates up to 143 ..mu..R/hr.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Hubbard, H.M. Jr.; Lorenzo, D.; Shinpaugh, W.H.

1980-03-01T23:59:59.000Z

398

Key programmatic steps and activities for implementing the Uranium Mill Tailings Remedial Action Project. [UMTRA Project  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA) was enacted based upon findings by Congress that uranium mill tailings located at active and inactive hazard to the public, and that protection of the public health, safety and welfare, and the regulations of interstate commerce, require that every reasonable effort be made to provide for the stabilization, disposal, and control in a safe and environmentally sound manner of such tailings in order to prevent or minimize radon diffusion into the environment and to prevent or minimize other environmental hazards from such tailings.'' A general understanding of the steps leading to elimination of the hazards associated with designated uranium mill tailings sites, and the parties involved in that effort, are presented in this document. A representative schedule is also presented in this document to show both program sequence and activity interdependence. Those activities that have the most potential to influence program duration, because of the significant amount of additional time that may be required, include identification and selection of a suitable site, field data collection delays due to weather, actual acquisition of the designated or alternate disposal site, construction delays due to weather, and site licensing. This document provides an understanding of the steps, the sequence, the parties involved, and a representative duration of activities leading to remedial action and cleanup at the designated inactive uranium mill tailings sites. 10 refs., 5 figs., 1 tab.

Not Available

1985-07-01T23:59:59.000Z

399

A Field and Modeling Study of Windblown Particles from a Uranium Mill Tailings Pile  

SciTech Connect

An extensive field study whose primary objective was to obtain knowledge and understanding of the nature and quantity of windblown particles from uranium mill tailings piles was conducted in the Ambrosia Lake District of New Mexico. The following major field tasks were undertaken: determination of physical, chemical, and radioactivity characteristics of mill tailings particles; an investigation of the nature and quantity of tailings particles in soil in the vicinity of tailings piles; and the determination of the nature and flux of particles being transported by wind as a function of wind speed and height. Results of the field study are presented. Particle size distributions and associated radioactivity were measured. Radioactivity relationships showed uranium daughters in mill tailings to be in essential radioactive equilibrium for the carbonate leach process but thorium-230 tends to be leached into the slurry water for the acid process mill tailings. One objective of the study was to relate windblown particle concentrations, fluxes, and particle sizes to wind speed. Hundreds of samples were taken and analyses were performed, but relationships between wind speed, airborne particle sizes and concentrations were found to be vague and inconclusive. A resuspension, deposition, and transport model was developed and applied using site meteorology. Ground deposition patterns predicted were similar to those found.

Schwendiman, L. C.; Sehmel, G. A.; Horst, T. W.; Thomas, C. W.; Perkins, R. W.

1980-06-01T23:59:59.000Z

400

Using alternative chemicals in the flotation of heavy metals from lead mill tailings  

Science Conference Proceedings (OSTI)

The U.S. Bureau of Mines (USBM) investigated alternative chemicals for the flotation of heavy metal values from southeast Missouri lead mill tailings. The objectives of the study were to lower the Pb remaining in the reprocessed tailings to canola oil, to be as effective as classic sulfide flotation reagents.

Benn, F.W. [Bureau of Mines, Rolla, MO (United States)

1995-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Application of Airborne Field Mill Data for Use in Launch Support  

Science Conference Proceedings (OSTI)

An airborne field mill (ABFM) system was implemented on a Learjet 36A and was used to collect electric-field and microphysical data for summertime convective clouds new Cape Canaveral and the Kennedy Space Center. This system is described and the ...

Ray Harris-Hobbs; Kathy Giori; Michael Bellmore; Arleen Lunsford

1994-06-01T23:59:59.000Z

402

Prediction of the Effect of Heat Generation in Ballscrew on the Accuracy of CNC Milling Machine  

Science Conference Proceedings (OSTI)

In high speed machining, friction between the moving parts, generates heat. One of the major causes of thermal errors in linear axes is the heat generated in ball screw during operation at high speed. Thermal errors affect the accuracy of the linear ... Keywords: CNC Milling Machine, Ballscrew, Circular Deviations, Ballbar Test, Artificial neural network

Hojat Dehnavi; Mohammad Reza Movahhedy; Ahmad Naebi; Soleyman Pasban

2012-03-01T23:59:59.000Z

403

Selective ensemble modeling parameters of mill load based on shell vibration signal  

Science Conference Proceedings (OSTI)

Load parameters inside the ball mill have direct relationships with the optimal operation of grinding process. This paper aims to develop a selective ensemble modeling approach to estimate these parameters. At first, the original vibration signal is ... Keywords: empirical mode decomposition, selective ensemble modeling, soft sensor, vibration frequency spectrum

Jian Tang; Li-Jie Zhao; Jia Long; Tian-you Chai; Wen Yu

2012-07-01T23:59:59.000Z

404

First Arkansas Mill of its kind turns sawdust into stove pellets  

Science Conference Proceedings (OSTI)

This article describes a new mill in Arkansas that converts waste sawdust into pellets for use in a new kind of stove like the ones two Resource Conservation and Development Districts placed in 20 districts as a demonstration project. A review of the wood pellet industry and of this particular project is provided.

NONE

1994-12-31T23:59:59.000Z

405

Equivalence of Two Approaches to Yang-Mills on Non-commutative Torus  

E-Print Network (OSTI)

There are two notions of Yang-Mills action functional in noncommutative geometry. We show that for noncommutative n-torus both these notions agree. We also prove a structure theorem on the Hermitian structure of a finitely generated projective modules over spectrally invariant subalgebras of $C^*$-algebras.

Partha Sarathi Chakraborty; Satyajit Guin

2013-04-29T23:59:59.000Z

406

MIL-L-87177 and CLT:X-10 Lubricants Improve Electrical Connector Fretting Corrosion Behavior  

SciTech Connect

We have conducted a fretting research project using MIL-L-87177 and CLT: X-10 lubricants on Nano-miniature connectors. When they were fretted without lubricant, individual connectors first exceeded our 0.5 ohm failure criteria from 2,341 to 45,238 fretting cycles. With additional fretting, their contact resistance increased to more than 100,000 ohms. Unmodified MIL-L-87177 lubricant delayed the onset of first failure to between 430,000 and over 20,000,000 fretting cycles. MIL-L-87177 modified by addition of Teflon powder delayed first failure to beyond 5 million fretting cycles. Best results were obtained when Teflon was used and also when both the straight and modified lubricants were poured into and then out of the connector. CLT: X-10 lubricant delayed the onset of first failure to beyond 55 million cycles in one test where a failure was actually observed and to beyond 20 million cycles in another that was terminated without failure. CLT: X-10 recovered an unlubricated connector driven deeply into failure, with six failed pins recovering immediately and four more recovering during an additional 420 thousand fretting cycles. MIL-L-87177 was not able to recover a connector under similar conditions.

AUKLAND,NEIL R.; HANLON,JAMES T.

1999-10-12T23:59:59.000Z

407

Use of blogs in pre-service teacher education to improve student engagement  

Science Conference Proceedings (OSTI)

Web 2.0 technologies allow average computer users to be able to publish on the Internet without having to know complex computer technical knowledge, which gives these technologies powerful potential to facilitate student engagement in various learning ... Keywords: Cooperative/collaborative learning, Improving classroom teaching, Post-secondary education, Teaching/learning strategies

Hasan Cakir

2013-10-01T23:59:59.000Z

408

Evaluation of a pervasive game for domestic energy engagement among teenagers  

Science Conference Proceedings (OSTI)

In this paper, we present Power Agent - a pervasive game designed to encourage teenagers and their families to reduce energy consumption in the home. The idea behind this mobile phone-based game was twofold; to transform the home environment and its ... Keywords: engaging interaction, persuasive games, pervasive games

Anton Gustafsson; Magnus Bång

2008-12-01T23:59:59.000Z

409

Evaluation of a pervasive game for domestic energy engagement among teenagers  

Science Conference Proceedings (OSTI)

In this article, we present Power Agent—a pervasive game designed to encourage teenagers and their families to reduce energy consumption in the home. The ideas behind this mobile phone-based game are twofold; to transform the home environment ... Keywords: Engaging interaction, automatic meter reading, energy conservation, feedback, persuasive games, pervasive games, pervasive learning

Anton Gustafsson; Cecilia Katzeff; Magnus Bang

2009-12-01T23:59:59.000Z

410

Engaging With the Public? Assessing the Online Presence and Communication Practices of the Nanotechnology Industry  

Science Conference Proceedings (OSTI)

This article examines whether the nanotechnology industry is engaging in the wider social debate surrounding it, through an analysis of its online communication practices. This is an important topic to study, given the nascent nature of the technology ... Keywords: cybermapping, hyperlink analysis, nanotechnology, online networks, science communication, social risk

Robert Ackland; Rachel Gibson; Wainer Lusoli; Stephen Ward

2010-11-01T23:59:59.000Z

411

Engaging rational discrimination: exploring reasons for placing regulatory constraints on decision support systems  

Science Conference Proceedings (OSTI)

In the future systems of ambient intelligence will include decision support systems that will automate the process of discrimination among people that seek entry into environments and to engage in search of the opportunities that are available there. ... Keywords: Ambient intelligence, Discrimination, Insurance, Privacy, Race, Surveillance, Technology assessment

Oscar H. Gandy, Jr.

2010-03-01T23:59:59.000Z

412

To search or to explore that is the question: a study in mindful engagement  

E-Print Network (OSTI)

to the trusty old search engine and maybe look further down the returned list, or enter numerous terms to see engine, enter some parameters to narrow the search and then peruse a returned list of items to find1 To search or to explore ­ that is the question: a study in mindful engagement Jon Pearce

Pearce, Jon

413

Voices of Experience: New Guide Offers Utilities’ Insights on Engaging with Smart Grid Customers  

Energy.gov (U.S. Department of Energy (DOE))

The Voices of Experience | Insights on Smart Grid Customer Engagement guide builds on the knowledge shared during a series of DOE-sponsored regional peer-to-peer workshops during which utilities discussed compelling smart grid topics and issues. The guide offers practical advice and lessons learned, and showcases creative, high-impact approaches.

414

The role of DCU Sport Heart Smart in Civic Engagement Overall, the strength of DCU Sport's commitment to civic engagement lies in the diversity of programmes on offer to the community.  

E-Print Network (OSTI)

The role of DCU Sport Heart Smart in Civic Engagement Overall, the strength of DCU Sport's commitment to civic engagement lies in the diversity of programmes on offer to the community. Heart Smart most vulnerable. The fact that three of the biggest hospitals in Dublin view Heart Smart

Humphrys, Mark

415

Mass gap in quantum energy-mass spectrum of relativistic Yang-Mills fields  

E-Print Network (OSTI)

A non-perturbative relativistic quantum Yang-Mills theory with a semisimple compact gauge Lie group on the four-dimensional Minkowski spacetime is set up in a Schroedinger representation with infinite-dimensional differential operators in the framework of sesqui-holomorphic nuclear Kree-Gelfand triples. The \\emph{linear} quantum Yang-Mills energy-mass operator $\\mathbf{H}$ is defined as the anti-normal quantization of the \\emph{non-linear} Yang-Mills energy-mass functional of Cauchy data supported by a ball $\\mathbb{B}(R)$ with the center at the origin of $\\mathbb{R}^3$ and the variable radius R>0. The general global solution of the non-linear Yang-Mills system of partial differential equations (with no restrictions at infinity) is reduced to the solution of the initial value problems in the temporal gauge with the Cauchy data supported by the balls $\\mathbb{B}(R)$. It is shown that $\\mathbf{H}$ dominates the number operator $\\mathbf{N}$. Since 0 is the spectral infimum of $\\mathbf{H}$ and, simultaneously, the simple fundamental eigenvalue of $N$, variational spectral principles imply that 0 is the simple fundamental eigenvalue of $N$ as well. Thus $\\mathbf{H}$ has a positive mass gap. The domination proof depends crucially on the magic of the Killing quadratic form that reveals a mass quadratic form in the Weyl symbol of $\\mathbf{H}$. With a dimensional transmutation of the coupling constant, the mass gap is proportional to 1/R and the running coupling constant is proportional to $\\sqrt{R}$. The inverse dependence demonstrates an asymptotic freedom for quantum Yang-Mills self-interaction at short distances. The mathematically rigorous theory is non-perturbative and provides a solution for the 7th Clay Institute Millennium problem.

Alexander Dynin

2013-08-29T23:59:59.000Z

416

A Confining Non-Local Four-Fermi Interaction from Yang-Mills Theory in a Stochastic Background  

E-Print Network (OSTI)

We derive a non-local four-fermi term with a linear potential from Yang-Mills Theory in a stochastic background. The stochastic background is a class of classical configuration derived from the non-linear gauge.

Jose A. Magpantay

2004-12-10T23:59:59.000Z

417

Investigation of aspect ratio of hole drilling from micro to nanoscale via focused ion beam fine milling  

E-Print Network (OSTI)

Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with ...

Fu, Yongqi

418

Real Time Simulation and Visualization of NC Milling Processes for Inhomogeneous Materials on Low-End Graphics Hardware  

E-Print Network (OSTI)

Simulation and visualization of NC milling processes has become an important step in computer aided manufacturing. The usage of stock materials with specific locally varying properties (like density, accuracy, color,. . . ) becomes more and more important with new technologies emerging in the material industry. Our new approach, using volumetric representation, has been adapted to this needs and copes with inhomogeneous material properties. Taking color as one possible material property, our approach enables the visualization of milled wood or compound materials. Furthermore, our approach has been developed with the usage of low-end graphics hardware in mind. The algorithms have been optimized to ensure interactive update rates even on standard personal computers without hardware graphics acceleration. Keywords: NC milling simulation, dexel approach, inhomogeneous material properties 1. Introduction NC milling simulation using computer graphics techniques was proposed some years ag...

Andreas Holger König; Eduard Gröller

1998-01-01T23:59:59.000Z

419

Hardness variation and cyclic crystalline-amorphous phase transformation in CuZr alloy during ball milling  

E-Print Network (OSTI)

The hardness and percent crystallinity of Cu33Zr67 powder samples are measured through several cycles of a cyclic phase transformation during ball milling. Each are found to cycle with a period of approximately 320 minutes. ...

Schoen, David Taylor

2005-01-01T23:59:59.000Z

420

Mechanical design of a desktop milling machine for fabrication in an introductory machining class by Johannes Schneider.  

E-Print Network (OSTI)

The purpose of this research is the mechanical design of a miniature desktop milling machine for use as an alternative class project in MIT's introductory machining course 2.670. This research is important, because a ...

Schneider, Johannes (Johannes A.)

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Stakeholder Engagement and Outreach: Calendar of Wind Power-Related Events  

Wind Powering America (EERE)

Events Events Printable Version Bookmark and Share Past Events Calendar of Wind Power-Related Events This page provides and extensive list of wind power-related events. Web developers are welcome to download an Excel file containing a list of these events to expedite inclusion on their websites (last updated 12/5/13). The Stakeholder Engagement and Outreach initiative also makes its calendar available through an RSS Feed Stakeholder Engagement and Outreach initiative events RSS feed . Learn about RSS Feeds. View Events by State Go to the text version of states with events. View Events by Month To view a list of events by month, select a month from the drop down box below. Make a selection All Events December 2013 January 2014 February 2014 March 2014 April 2014 May 2014 June 2014 July 2014 August 2014 September 2014

422

Structural analysis of arabinoxylans isolated from ball-milled switchgrass biomass  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis analysis of arabinoxylans isolated from ball-milled switchgrass biomass Koushik Mazumder, William S. York * Complex Carbohydrate Research Center, University of Georgia, 315 Riverbend Road, Athens, GA 30602, USA a r t i c l e i n f o Article history: Received 16 June 2010 Received in revised form 20 July 2010 Accepted 22 July 2010 Available online 30 July 2010 Keywords: Switchgrass Enzymatic digestion Arabinoxylan oligosaccharides Per-O-methylation Multiple-step mass spectrometry Structural analysis a b s t r a c t Ball-milled alcohol-insoluble residue (AIR) was prepared from switchgrass (Panicum virgatum var Alamo) and sequentially extracted with 50 mM ammonium oxalate buffer, 50 mM sodium carbonate, 1 M KOH containing 1% NaBH 4 , and 4 M KOH containing 1% NaBH 4 . Arabinoxylan was the most abundant component of the 1 M KOH-extracted fraction, which was treated with endoxylanase

423

Moab Mill Tailings Removal Project Plans to Resume Train Shipments in  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plans to Resume Train Shipments Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return Moab Mill Tailings Removal Project Plans to Resume Train Shipments in March; All of the Laid Off Workers Will Return February 25, 2013 - 12:00pm Addthis Media Contacts Donald Metzler, donald.metzler@gjem.doe.gov 970-257-2115 Jeff Biagini, jeff.biagini@gjemrac.doe.gov 970-257-2117 Wendee Ryan, wryan@gjemtac.doe.gov 970-257-2145 Grand Junction, CO - All 27 employees of the Remedial Action Contractor (RAC) to the U.S. Department of Energy will return to work on the Uranium Mill Tailings Remedial Action Project on March 4, following a 3-month planned furlough. Project shipping and disposal operations have been shut down, as planned, since late November 2012, but are scheduled to resume

424

Energy Efficiency Improvements and Cost Saving Opportunities in the Corn Wet Milling Industry  

E-Print Network (OSTI)

Corn wet milling is the most energy intensive industry in the food and kindred products group (SIC 20). Plants typically spend approximately $15 to 25 million per year on energy, one of its largest operating costs, making energy efficiency improvement an important way to reduce costs and increase predictable earnings, especially in times of high energy-price volatility. After describing the industry's trends, structure and production and the process's energy use, we examine energy-efficiency opportunities for corn wet millers. Where available, we provide energy savings and typical payback periods for each measure based on case studies of plants that have implemented it. Given available resources and technology, there are opportunities to reduce energy consumption cost-effectively in the industry while maintaining the quality of the products produced. Further research on the economics of the measures and their applicability to different wet milling practices is needed to assess implementation of selected technologies at individual plants.

Galitsky, C.; Worrell, E.

2003-05-01T23:59:59.000Z

425

Radiological survey of the inactive uranium-mill tailings at the Spook site, Converse County, Wyoming  

SciTech Connect

Results of a radiological survey performed at the Spook site in Converse County, Wyoming, in June 1976, are presented. The mill at this site was located a short distance from the open-pit mine where the ore was obtained and where part of the tailings was dumped into the mine. Several piles of overburden or low-grade ore in the vicinity were included in the measurements of above-ground gamma exposure rate. The average exposure rate over these piles varied from 14 ..mu..R/hr, the average background exposure rate for the area, to 140 ..mu..R/hr. The average exposure rate for the tailings and former mill area was 220 ..mu..R/hr. Movement of tailings particles down dry washes was evident. The calculated concentration of /sup 226/Ra in ten holes as a function of depth is presented graphically.

Haywood, F.F.; Christian, D.J.; Chou, K.D.; Ellis, B.S.; Lorenzo, D.; Shinpaugh, W.H.

1980-05-01T23:59:59.000Z

426

An aerial radiological survey of the Durango, Colorado uranium mill tailings site and surrounding area  

SciTech Connect

An aerial radiological survey of Durango, Colorado, including the inactive uranium mill tailings piles located southwest of the town, was conducted during August 25--29, 1980, for the Department of Energy's Environmental and Safety Engineering Division. Areas of radiation exposure rates higher than the local background, which was about 15 microrentgens per hour ({mu}R/h), were observed directly over and to the south of the mill tailings piles, over a cemetery, and at two spots near the fairgrounds. The rapidly changing radiation exposure rates at the boundaries of the piles preclude accurate extrapolation of aerial radiological data to ground level exposure rates in their immediate vicinity. Estimated radiation exposure rates close to the piles, however, approached 30 times background, or about 450 {mu}R/h. Radiation exposure rates in a long area extending south from the tailings piles were about 25 {mu}R/h.

Hilton, L.K.

1981-06-01T23:59:59.000Z

427

Estimated dose to man from uranium milling via the terrestrial food-chain pathway  

SciTech Connect

One of the major pathways of radiological exposure to man from uranium milling operations is through the terrestrial food chain. Studies by various investigators have shown the extent of uptake and distribution of U-238, U-234, Th-230, Ra-226, Pb-210, and Po-210 in plants and animals. These long-lived natural radioisotopes, all nuclides of the uranium decay series, are found in concentrated amounts in uranium mill tailings. Data from these investigations are used to estimate the dose to man from consumption of beef and milk contaminated by the tailings. This dose estimate from this technologically enhanced source is compared with that from average normal dietary intake of these radionuclides from natural sources.

Rayno, D.R.

1982-01-01T23:59:59.000Z

428

Protect and Restore Mill Creek Watershed; Annual Report 2002-2003.  

DOE Green Energy (OSTI)

The Nez Perce Tribe Department of Fisheries Resource Management, Watershed Division approaches watershed restoration with a ridge-top to ridge-top approach. Watershed restoration projects within the Mill Creek watershed are coordinated with the Nez Perce National Forest. The Nez Perce Tribe began watershed restoration projects within the Mill Creek watershed of the South Fork Clearwater River in 2000. Progress has been made in restoring the watershed through excluding cattle from critical riparian areas through fencing. During the FY 2002, trees were planted in riparian areas in the meadow of the upper watershed. In addition, a complete inventory of culverts at road-stream crossings was completed. Culverts have been prioritized for replacement to accommodate fish passage throughout the watershed. Maintenance to the previously built fence was also completed.

McRoberts, Heidi (Nez Perce Tribe, Department of Fisheries Resource Management, Lapwai, ID)

2004-01-01T23:59:59.000Z

429

1981 national survey of compensation paid scientists and engineers engaged in research and development activities  

Science Conference Proceedings (OSTI)

The results of a compensation survey conducted by the Columbus Laboratories of Battelle are presented. The survey was entitled A National Survey of Compensation Paid to Scientists and Engineers Engaged in Research and Development Activities. Information is included on the: sampling procedures; basic data for survey analysis; beginning salaries for recent graduates with bachelor, master, or doctorate degrees; salary trends; geographic analysis; interpretation of results; and salary tables. (LCL)

Not Available

1981-12-01T23:59:59.000Z

430

Synthesizing Utility Experiences in Educating and Engaging Customers in Smart Meter/Smart Grid Deployments  

Science Conference Proceedings (OSTI)

The Electric Power Research Institute (EPRI) and Commonwealth Edison (ComEd) co-sponsored a Synthesizing Utility Experiences in Educating and Engaging Customers in Smart Meter/Smart Grid Deployments workshop that was held July 7–8, 2012, in Chicago, Illinois. The workshop objective was to explore issues and encourage dialogue about experiences in designing and implementing effective customer education awareness campaigns in conjunction with wide-scale deployment of smart ...

2012-08-31T23:59:59.000Z

431

Remedial Action Plan and site design for stabilization of the inactive uranium mill tailings site at Falls City, Texas. [Uranium Mill Tailings Remedial Action (UMTRA) Project  

Science Conference Proceedings (OSTI)

The uranium processing site near Falls City, Texas, was one of 24 inactive uranium mill sites designated to be remediated by the US Department of Energy (DOE) under Title I of the Uranium Mill Tailings Radiation Control Act of 1978 (UMTRCA). The UMTRCA requires that the US Nuclear Regulatory Commission (NRC) concur with the DOE's remedial action plan (RAP) and certify that the remedial action conducted at the site complies with the standards promulgated by the US Environmental Protection Agency (EPA). The RAP, which includes this summary remedial action selection report (RAS), serves a two-fold purpose. First, it describes the activities proposed by the DOE to accomplish long-term stabilization and control of the residual radioactive materials at the inactive uranium processing site near Falls City, Texas. Second, this document and the remainder of the RAP, upon concurrence and execution by the DOE, the State of Texas, and the NRC, becomes Appendix B of the Cooperative Agreement between the DOE and the State of Texas.

Chernoff, A.R. (USDOE Albuquerque Field Office, NM (United States). Uranium Mill Tailings Remedial Action Project Office); Lacker, D.K. (Texas State Dept. of Health, Austin, TX (United States). Bureau of Radiation Control)

1992-09-01T23:59:59.000Z

432

Remedial action plan and site design for stabilization of the inactive uranium mill tailings sites at Rifle, Colorado  

SciTech Connect

This appendix assesses the present conditions and data gathered about the two inactive uranium mill tailings sites near Rifle, Colorado, and the designated disposal site six miles north of Rifle in the area of Estes Gulch. It consolidates available engineering, radiological, geotechnical, hydrological, meteorological, and other information pertinent to the design of the Remedial Action Plan (RAP). The data characterize conditions at the mill, tailings, and disposal site so that the Remedial Action Contractor (RAC) may complete final designs for the remedial actions.

Not Available

1992-02-01T23:59:59.000Z

433

Baeklund transformations, conservation laws and linearization of the self-dual Yang-Mills and chiral fields  

SciTech Connect

Baecklund Transformations (BT) and the derivation of local conservation laws are first reviewed in the classic case of the Sine-Gordon equation. The BT, conservation laws (local and nonlocal), and the inverse-scattering formulation are discussed for the chiral and the self-dual Yang-Mills fields. Their possible applications to the loop formulation for the Yang-Mills fields are mentioned. 55 references, 1 figure.

Wang, L.C.

1980-01-01T23:59:59.000Z

434

Nonequilibrium roughening of interfaces in crystals under shear: application to ball milling  

SciTech Connect

A simple kinetic atomistic model is proposed for describing crystals submitted to sustained shearing, acting in competition with thermally activated diffusion. Monte Carlo simulations are performed on alloys with positive heats of mixing. The results provide a clear understanding of recent experiments showing that chemical mixing of immiscible elements can be induced by ball milling. At moderate shearing rates, an analytical model shows that such driven systems exhibit nonequilibrium roughening.

Bellon, P.; Averback, R.S. (Department of Materials Science and Engineering, 1304 W. Green Street, Urbana, Illinois 61801 (United States))

1995-03-06T23:59:59.000Z

435

The Polarization Tensor of the Massless Mode in Yang-Mills Thermodynamics  

Science Conference Proceedings (OSTI)

We discuss the constraints on energy-momentum transfers in local vertices in the effective theory for the deconfining phase of SU(2) Yang-Mills thermodynamics. Subsequently, we apply these constraints to the computation of the polarization tensor of the massless mode on the one-loop level. The resulting gap equation for the sought-after screening function is solved numerically. We discuss and interpret our results.

Schwarz, Markus [Salierstr. 10, 76137 Karlruhe (Germany)

2011-09-22T23:59:59.000Z

436

Milling induces disorder in crystalline griseofulvin and order in its amorphous counterpart  

Science Conference Proceedings (OSTI)

This study investigates two apparently similar thermal signatures, shaped as bimodal exotherms, observed when either the crystalline or the amorphous from of the drug are subjected to milling. Crystalline griseofulvin was cryomilled and the (quenched-melt) amorphous form was subjected to either cryomilling or grinding. The thermal and surface properties of the resulting samples were analyzed using differential scanning calorimetry (DSC) and surface energy analysis. After milling, both the crystalline and the amorphous material revealed visually similar bimodal exothermic events when the heating rate was 20 C min{sup -1}. Under different heating rates, the pair of DSC peaks for the bimodal exotherm of each material behaved entirely different from each other. The two peaks of the bimodal event, as well as the glass transition, can be kinetically resolved for the ground amorphous form using standard mode DSC. In contrast, similar analysis was unable to resolve the bimodal exotherm or a glass transition in the case of the cryomilled crystals. Furthermore, cryomilled crystals do not exhibit a glass transition even when analyzed using modulated DSC. Synchrotron sourced X-ray analysis revealed that grinding the amorphous material results in the nucleation and growth of the crystalline form. Milling thus induces disorder in the crystals of griseofulvin but induces order in the amorphous form of the drug. The surface of the two milled systems consistently exhibited different energetics under a wide range of relative humidity conditions. These findings suggest that cryomilling induces both bulk and surface disorder, specifically, a certain level of dislocations on the crystal. In contrast, grinding the amorphous material lowers the activation energy for crystal formation, inducing nuclei formation and growth throughout the amorphous matrix.

Otte, Andrew; Zhang, Yan; Carvajal, M. Teresa; Pinal, Rodolfo (Purdue)

2012-04-02T23:59:59.000Z

437

Noncommutative N=1 super Yang-Mills, the Seiberg-Witten map and UV divergences  

E-Print Network (OSTI)

Classically, the dual under the Seiberg-Witten map of noncommutative U(N), {\\cal N}=1 super Yang-Mills theory is a field theory with ordinary gauge symmetry whose fields carry, however, a \\theta-deformed nonlinear realisation of the {\\cal N}=1 supersymmetry algebra in four dimensions. For the latter theory we work out at one-loop and first order in the noncommutative parameter matrix \\theta^{\\mu\

C. P. Martin; C. Tamarit

2009-07-14T23:59:59.000Z

438

Guidance for Comanagement of Mill Rejects at Coal-Fired Power Plants  

Science Conference Proceedings (OSTI)

Traditionally, utilities have comanaged some or all of their low-volume wastes with their high-volume combustion by-products in disposal facilities. This report presents guidance on comanagement of coal combustion by-products and mill rejects containing pyrites at coal-fired power plants. The report specifically addresses the issue of environmental protection from leachates due to oxidation of pyrites under certain conditions. Included is a discussion of acid-base accounting and neutralization capacity o...

1999-06-22T23:59:59.000Z

439

String scattering in flat space and a scaling limit of Yang-Mills correlators  

Science Conference Proceedings (OSTI)

We use the flat space limit of the AdS/CFT correspondence to derive a simple relation between the 2{yields}2 scattering amplitude of massless string states in type IIB superstring theory on ten-dimensional Minkowski space and a scaling limit of the N=4 super Yang-Mills four-point functions. We conjecture that this relation holds nonperturbatively and at arbitrarily high energy.

Okuda, Takuya [Perimeter Institute for Theoretical Physics, Waterloo, Ontario, N2L 2Y5 (Canada); Penedones, Joao [Kavli Institute for Theoretical Physics, Santa Barbara, California 93106-4030 (United States)

2011-04-15T23:59:59.000Z

440

Particle motion in a Yang-Mills field Wong's equations and spin one-half analogues  

E-Print Network (OSTI)

A complete, straightforward and natural Lagrangian description is given for the classical non-relativistic dynamics of a particle with colour or internal symmetry degrees of freedom moving in a background Yang-Mills field. This provides a new simple Lagrangian formalism for Wong's equations for spinless particles, and presents also their generalisation, in gauge covariant form, for spin-\\frack particles, within a complete Lagrangian formalism.

Van Holten, J W

1995-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Particle Motion in a Yang-Mills Field: Wong's Equations and Spin One-half Analogues  

E-Print Network (OSTI)

A complete, straightforward and natural Lagrangian description is given for the classical non-relativistic dynamics of a particle with colour or internal symmetry degrees of freedom moving in a background Yang-Mills field. This provides a new simple Lagrangian formalism for Wong's equations for spinless particles, and presents also their generalisation, in gauge covariant form, for spin-$\\frack$ particles, within a complete Lagrangian formalism.

N Linden A J Macfarlane; J W van Holten

1995-12-11T23:59:59.000Z

442

Effects Of Milling On Surface Integrity Of Low-Carbon Steel  

Science Conference Proceedings (OSTI)

This work measured the effect of milling parameters on the surface integrity of low-carbon alloy steel. The Variance Analysis showed that only depth of cut did not influence on the workpiece roughness and the Pearson's Coefficient indicated that cutting speed was more influent than tool feed. All cutting parameters introduced tensile residual stress in workpiece surface. The chip formation mechanism depended specially on cutting speed and influenced on the roughness and residual stress of workpiece.

Rodrigues, Alessandro Roger; Matsumoto, Hidekasu; Yamakami, Wyser Jose; Tokimatsu, Ruis Camargo; Menezes, Miguel Angelo; Suyama, Daniel Iwao; Norcino, Adriana Bruno; Vendrame, Saimon [UNESP-Univ Estatual Paulista, Engineering Faculty of Ilha Solteira, Av. Brasil Centro, 56-Zip Code 15.385-000-Ilha Solteira, Sao Paulo (Brazil)

2011-01-17T23:59:59.000Z

443

Ghana Goes for Green Growth: National Engagement on Climate Change | Open  

Open Energy Info (EERE)

Ghana Goes for Green Growth: National Engagement on Climate Change Ghana Goes for Green Growth: National Engagement on Climate Change Jump to: navigation, search Tool Summary Name: Ghana Goes for Green Growth: National Engagement on Climate Change Agency/Company /Organization: Government of Ghana Sector: Energy, Land Topics: Background analysis Resource Type: Publications Website: www.ecn.nl/nl/home/ Country: Ghana UN Region: Western Africa Coordinates: 7.946527°, -1.023194° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":7.946527,"lon":-1.023194,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

444

U.S. Maximum Number of Active Crews Engaged in Seismic Surveying (Number of  

Gasoline and Diesel Fuel Update (EIA)

Maximum Number of Active Crews Engaged in Seismic Surveying (Number of Elements) Maximum Number of Active Crews Engaged in Seismic Surveying (Number of Elements) U.S. Maximum Number of Active Crews Engaged in Seismic Surveying (Number of Elements) Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2000 0 0 62 63 59 63 58 61 59 63 62 65 2001 61 61 63 65 64 60 58 56 54 58 59 58 2002 54 57 54 50 51 50 52 50 56 57 50 43 2003 40 41 41 40 38 39 41 43 39 39 38 42 2004 43 45 45 45 44 49 48 49 48 48 49 50 2005 52 53 51 50 55 57 54 55 56 57 57 58 2006 55 57 59 58 58 57 66 62 63 64 65 64 2007 63 63 68 71 70 69 69 71 73 77 79 75 2008 76 77 75 72 73 73 72 72 NA 77 72 73 2009 75 76 72 70 65 60 61 60 60 63 62 63 2010 64 65 63 66 67 67 67 65 64 62 62 62

445

1992 Trieste Lectures on Topological Gauge Theory and Yang-Mills Theory  

E-Print Network (OSTI)

In these lecture notes we explain a connection between Yang-Mills theory on arbitrary Riemann surfaces and two types of topological field theory, the so called $BF$ and cohomological theories. The quantum Yang-Mills theory is solved exactly using path integral techniques. Explicit expressions, in terms of group representation theory, are obtained for the partition function and various correlation functions. In a particular limit the Yang-Mills theory devolves to the topological models and the previously determined correlation functions give topological information about the moduli spaces of flat connections. In particular, the partition function yields the volume of the moduli space for which an explicit expression is derived. These notes are self contained, with a basic introduction to the various ideas underlying the topological field theories. This includes some relatively new work on handling problems that arise in the presence of reducible connections which in turn forms the bridge between the various models under consideration. These notes are identical to those made available to participants of the 1992 summer school in Trieste, except for one or two additions added circa January 1993.

George Thompson

1993-05-24T23:59:59.000Z

446

Environmental assessment of remedial action at the Gunnison Uranium Mill Tailings Site, Gunnison, Colorado. [UMTRA Project  

SciTech Connect

This document assesses and compares the environmental impacts of various alternatives for remedial action at the Gunnison uranium of mill tailings site located 0.5 miles south of Gunnison, Colorado. The site covers 56 acres and contains 35 acres of tailings, 2 of the original mill buildings and a water tower. The Uranium Mill Tailings Radiation Control of Act of 1978 (UMTRCA), Public Law 95-604, authorizes the US Department of Energy to clean up the site to reduce the potential health impacts associated with the residual radioactive materials remaining at the site and at associated (vicinity) properties off the site. The US Environmental Protection Agency promulgated standards for the remedial actions (40 CFR 192). Remedial actions must be performed in accordance with these standards and with the occurrence of the Nuclear Regulatory Commission. Four alternatives have been addressed in this document. The first alternative is to consolidate the tailings and associated contaminated soils into a recontoured pile on the southern portion of the existing site. A radon barrier of silty clay would be constructed over the pile and various erosion control measures would be taken to assure the long-term integrity of the pile. Two other alternatives which involve moving the tailings to new locations are assessed in this document. These alternatives generally involve greater short-term impacts and are more costly but would result in the tailings being stabilized in a location farther from the city of Gunnison. The no action alternative is also assessed.

Bachrach, A.; Hoopes, J.; Morycz, D. (Jacobs Engineering Group, Inc., Pasadena, CA (USA)); Bone, M.; Cox, S.; Jones, D.; Lechel, D.; Meyer, C.; Nelson, M.; Peel, R.; Portillo, R.; Rogers, L.; Taber, B.; Zelle, P. (Weston (Roy F.), Inc., Washington, DC (USA)); Rice, G. (Sergent, Hauskins and Beckwith (USA))

1984-12-01T23:59:59.000Z

447

Radiological survey of the inactive uranium-mill tailings at Ray Point, Texas  

SciTech Connect

The mill site and tailings pile near Ray Point, Texas, cover an area of approximately 140 hectares located 1.6 km west of Ray Point. The dry portion of the tailings pile is stabilized, and the whole pile is surrounded by a dike. It contains approximately 445,000 metric tons of material with an estimated average /sup 226/Ra concentration of 518 pCi/g. The average gamma-ray exposure rate 1 m above the pile is 300 ..mu..R/hr while the corresponding average for the mill site, including the former ore storage area, is 87 ..mu..R/hr. Soil and sediment sample analyses, as well as gamma-ray exposure rate measurements, show some spread of contamination off the site; however, it appears that control measures at this site have been effective in limiting the spread of tailings. Access to the area is limited by chain-link and barbed-wire fences, and continued surveillance of the area is maintained. The mill buildings have been maintained for possible future use.

Haywood, F.F.; Christian, D.J.; Ellis, B.S.; Loy, E.T.; Lorenzo, D.

1980-11-01T23:59:59.000Z

448

Radiological survey of the inactive uranium-mill tailings at Slick Rock, Colorado  

SciTech Connect

Results of a radiological survey of two inactive mill sites near Slick Rock, Colorado, in April 1976 are presented. One mill, referred to in this report as North Continent (NC), was operated primarily for recovery of radium and vanadium and, only briefly, uranium. The Union Carbide Corporation (UCC) mill produced a uranium concentrate for processing elsewhere and, although low-level contamination with /sup 226/Ra was widespread at this site, the concentration of this nuclide in tailings was much lower than at the NC site. The latter site also has an area with a high above-ground gamma dose rate (2700 ..mu..R/hr) and a high-surface /sup 226/Ra concentration (5800 pCi/g). This area, which is believed to have been a liquid disposal location during plant operations, is contained within a fence. A solid disposal area outside the present fence contains miscellaneous contaminated debris. The estimated concentration of /sup 226/Ra as a function of depth, based on gamma hole-logging data, is presented for 27 holes drilled at the two sites.

Haywood, F.F.; Perdue, P.T.; Chou, K.D.; Ellis, B.S.

1980-06-01T23:59:59.000Z

449

Engineering assessment of inactive uranium mill tailings: Monument Valley Site, Monument Valley, Arizona  

Science Conference Proceedings (OSTI)

Ford, Bacon and Davis Utah Inc. has reevalated the Monument Valley site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Monument Valley, Arizona. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposure of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.1 million tons of tailings at the Monument Valley site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through IV). Cost estimates for the four options range from about $6,600,000 for stabilization in-place, to about $15,900,000 for disposal at a distance of about 15 mi. Three principal alternatives for reprocessing the Monument Valley tailings were examined: heap leaching; Treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovery is economically unattractive.

Not Available

1981-10-01T23:59:59.000Z

450

Annual status report on the Uranium Mill Tailings Remedial Action Program  

SciTech Connect

This eleventh annual status report summarizes activities of the Uranium Mill Tailings Remedial Action (UMTRA) Project undertaken during Fiscal Year (FY) 1989 by the US Department of Energy (DOE) and other agencies. Project goals for FY 1990 are also presented. An annual report of this type was a statutory requirement through January 1, 1986, pursuant to the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law (PL) 95--604. The DOE will continue to submit an annual report through project completion in order to inform the public of yearly project status. Title I of the UMTRCA authorizes the DOE, in cooperation with affected states and Indian tribes within whose boundaries designated uranium processing sites are located, to provide a program of assessment and remedial action at such sites. The purpose of the remedial action is to stabilize and control the tailings and other residual radioactive materials located on the inactive uranium processing sites in a safe and environmentally sound manner and to minimize or eliminate potential radiation health hazards. Commercial and residential properties in the vicinity of designated processing sites that are contaminated with material from the sites, herein referred to as vicinity properties,'' are also eligible for remedial action. Included in the UMTRA Project are 24 inactive uranium processing sites and associated vicinity properties located in 10 states, and the vicinity properties associated with Edgemont, South Dakota, an inactive uranium mill currently owned by the Tennessee Valley Authority (TVA).

Not Available

1989-12-01T23:59:59.000Z

451

Capture and Sequestration of CO2 at the Boise White Paper Mill  

SciTech Connect

This report documents the efforts taken to develop a preliminary design for the first commercial-scale CO2 capture and sequestration (CCS) project associated with biomass power integrated into a pulp and paper operation. The Boise Wallula paper mill is located near the township of Wallula in Southeastern Washington State. Infrastructure at the paper mill will be upgraded such that current steam needs and a significant portion of the current mill electric power are supplied from a 100% biomass power source. A new biomass power system will be constructed with an integrated amine-based CO2 capture plant to capture approximately 550,000 tons of CO2 per year for geologic sequestration. A customized version of Fluor Corporation’s Econamine Plus™ carbon capture technology will be designed to accommodate the specific chemical composition of exhaust gases from the biomass boiler. Due to the use of biomass for fuel, employing CCS technology represents a unique opportunity to generate a net negative carbon emissions footprint, which on an equivalent emissions reduction basis is 1.8X greater than from equivalent fossil fuel sources (SPATH and MANN, 2004). Furthermore, the proposed project will offset a significant amount of current natural gas use at the mill, equating to an additional 200,000 tons of avoided CO2 emissions. Hence, the total net emissions avoided through this project equates to 1,100,000 tons of CO2 per year. Successful execution of this project will provide a clear path forward for similar kinds of emissions reduction that can be replicated at other energy-intensive industrial facilities where the geology is suitable for sequestration. This project also represents a first opportunity for commercial development of geologic storage of CO2 in deep flood basalt formations. The Boise paper mill site is host to a Phase II pilot study being carried out under DOE’s Regional Carbon Partnership Program. Lessons learned from this pilot study and other separately funded projects studying CO2 sequestration in basalts will be heavily leveraged in developing a suitable site characterization program and system design for permanent sequestration of captured CO2. The areal extent, very large thickness, high permeability in portions of the flows, and presence of multiple very low permeability flow interior seals combine to produce a robust sequestration target. Moreover, basalt formations are quite reactive with water-rich supercritical CO2 and formation water that contains dissolved CO2 to generate carbonate minerals, providing for long-term assurance of permanent sequestration. Sub-basalt sediments also exist at the site providing alternative or supplemental storage capacity.

B.P. McGrail; C.J. Freeman; G.H. Beeman; E.C. Sullivan; S.K. Wurstner; C.F. Brown; R.D. Garber; D. Tobin E.J. Steffensen; S. Reddy; J.P. Gilmartin

2010-06-16T23:59:59.000Z

452

Energy efficiency improvement and cost saving opportunities for the Corn Wet Milling Industry: An ENERGY STAR Guide for Energy and Plant Managers  

E-Print Network (OSTI)

Characterization: Steam Turbines”, Energy Nexus Group,coal, in boilers using steam turbines. A few generate onlylarge-scale mills use steam turbine systems. Switching to

Galitsky, Christina; Worrell, Ernst; Ruth, Michael

2003-01-01T23:59:59.000Z

453

1980 national survey of compensation paid scientists and engineers engaged in research and development activities  

Science Conference Proceedings (OSTI)

In November of 1966, the United States Department of Energy awarded a contract to the Columbus Laboratories of Battelle to design a survey of compensation paid to scientific and engineering personnel engaged in research and development in the United States. The contract provided that such a survey would utilize the maturity or age-wage approach, under which salary data would be related to years since receipt of degree or chronological age. This document reports the results of the thirteenth annual survey, conducted in 1980.

Not Available

1980-12-01T23:59:59.000Z

454

NUCLEAR ISOTOPIC DILUTION OF HIGHLY ENRICHED URANIUM BY DRY BLENDING VIA THE RM-2 MILL TECHNOLOGY  

SciTech Connect

DOE has initiated numerous activities to focus on identifying material management strategies to disposition various excess fissile materials. In particular the INEEL has stored 1,700 Kg of offspec HEU at INTEC in CPP-651 vault facility. Currently, the proposed strategies for dispositioning are (a) aqueous dissolution and down blending to LEU via facilities at SRS followed by shipment of the liquid LEU to NFS for fabrication into LWR fuel for the TVA reactors and (b) dilution of the HEU to 0.9% for discard as a waste stream that would no longer have a criticality or proliferation risk without being processed through some type of enrichment system. Dispositioning this inventory as a waste stream via aqueous processing at SRS has been determined to be too costly. Thus, dry blending is the only proposed disposal process for the uranium oxide materials in the CPP-651 vault. Isotopic dilution of HEU to typically less than 20% by dry blending is the key to solving the dispositioning issue (i.e., proliferation) posed by HEU stored at INEEL. RM-2 mill is a technology developed and successfully tested for producing ultra-fine particles by dry grinding. Grinding action in RM-2 mill produces a two million-fold increase in the number of particles being blended in a centrifugal field. In a previous study, the concept of achieving complete and adequate blending and mixing (i.e., no methods were identified to easily separate and concentrate one titanium compound from the other) in remarkably short processing times was successfully tested with surrogate materials (titanium dioxide and titanium mono-oxide) with different particle sizes, hardness and densities. In the current project, the RM-2 milling technology was thoroughly tested with mixtures of natural uranium oxide (NU) and depleted uranium oxide (DU) stock to prove its performance. The effects of mill operating and design variables on the blending of NU/DU oxides were evaluated. First, NU and DU both made of the same oxide, UO{sub 3}, was used in the testing. Next, NU made up of UO{sub 3} and DU made up of UO{sub 2} was used in the test work. In every test, the blend achieved was characterized by spatial sampling of the ground product and analyzing for {sup 235}U concentration. The test work proved that these uranium oxide materials can be blended successfully. The spatial concentration was found to be uniform. Next, sintered thorium oxide pellets were used as surrogate for light water breeder reactor pellets (LWBR). To simulate LWBR pellet dispositioning, the thorium oxide pellets were first ground to a powder form and then the powder was blended with NU. In these tests also the concentration of {sup 235}U and {sup 232}Th in blended products fell within established limits proving the success of RM-2 milling technology. RM-2 milling technology is applicable to any dry radioactive waste, especially brittle solids that can be ground up and mixed with the non-radioactive stock.

Raj K. Rajamani; Sanjeeva Latchireddi; Vikas Devrani; Harappan Sethi; Roger Henry; Nate Chipman

2003-08-01T23:59:59.000Z

455

Microstructure and mechanical properties of 7075 aluminum alloy nanostructured composites processed by mechanical milling and indirect hot extrusion  

SciTech Connect

Nanostructured composites of 7075 aluminum alloy and carbon coated silver nanoparticles were produced by mechanical milling and indirect hot extrusion. The milling products were obtained in a high energy SPEX ball mill, and then were compacted by uniaxial load and pressure-less sintered under argon atmosphere. Finally, the sintered product was hot extruded. Carbon coated silver nanoparticles were well distributed in the matrix of the extruded material. Tensile tests were carried out to corroborate the hypothesis that second phase particles, well dispersed in the matrix, improve the strength of the material. High resolution transmission electron microscopy was employed to locate and make sure that the silver nanoparticles were homogeneously and finely dispersed. Highlights: Black-Right-Pointing-Pointer 7075 Al nanostructured composites can be produced by mechanical milling. Black-Right-Pointing-Pointer Carbon coated silver nanoparticles are well dispersed into aluminum matrix. Black-Right-Pointing-Pointer Ductile Ag-C NP's improve the mechanical properties of the 7075 Al-alloy. Black-Right-Pointing-Pointer Ag-C NP's content has an important effect in the particle and crystallite size. Black-Right-Pointing-Pointer Ag-C NP's keep their morphology after milling and conformation processes.

Flores-Campos, R., E-mail: ruben.flores@itesm.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Tecnologico de Monterrey Campus Saltillo, Departamento de Ingenieria, Prol. Juan de la Barrera No. 1241 Ote., Col. Cumbres, CP 25270, Saltillo, Coah., Mexico (Mexico); Estrada-Guel, I., E-mail: ivanovich.estrada@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Miki-Yoshida, M., E-mail: mario.miki@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Martinez-Sanchez, R., E-mail: roberto.martinez@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico); Herrera-Ramirez, J.M., E-mail: martin.herrera@cimav.edu.mx [Centro de Investigacion en Materiales Avanzados (CIMAV), Laboratorio Nacional de Nanotecnologia, Miguel de Cervantes No. 120, CP 31109, Chihuahua, Chih., Mexico (Mexico)

2012-01-15T23:59:59.000Z

456

Engineering assessment of inactive uranium mill tailings, Shiprock site, Shiprock, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah Inc. has reevaluated the Shiprock site in order to revise the March 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Shiprock, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from the 1.5 million dry tons of tailings at the Shiprock site constitutes the most significant environental impact, although windblown tailings and external gamma radiation also are factors. The eight alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material (Option I), to removal of the tailings to remote disposal sites and decontamination of the tailings site (Options II through VIII). Cost estimates for the eight options range from about $13,400,000 for stabilization in place to about $37,900,000 for disposal at a distance of about 16 miles. Three principal alternatives for the reprocessing of the Shiprock tailings were examined: (a) heap leaching; (b) treatment at an existing mill; and (c) reprocessing at a new conventional mill constructed for tailings reprocessing. The cost of the uranium recovered would be about $230/lb by heap leach and $250/lb by conventional plant processes. The spot market price for uranium was $25/lb early in 1981. Therefore, reprocessing the tailings for uranium recovery is not economically attractive.

Not Available

1981-07-01T23:59:59.000Z

457

Finding and evaluating potential radiological problems in the vicinity of uranium milling sites  

Science Conference Proceedings (OSTI)

Tailings at inactive milling sites usually have a low frequency of human occupancy but continuously generate /sup 222/Rn into the atmosphere. Measurements of airborne /sup 222/Rn and /sup 222/Rn flux are made on the sites to define the tailings source term. Concurrently with these measurements, an ambient /sup 222/Rn monitoring network is established off-site and a meteolrololgical station is established at or near the mill site. Radioactivity can migrate to areas outside of site boundaries by wind and water erosion, groundwater transport, spillage of incoming purposes. In order to identify and assess off-site radioactivity on properties in the vicinity of milling sites, a combination of aerial and ground-level radiological monitoring techniques are used. The ground mobile gamma-ray scan is conducted using a vehicle equipped with sensitive gamma-ray detectors. The detectors are shielded so that gamma radiation input is viewed through only one side of the vehicle. This system is capable of precisely locating properties which have anomalously high gamma radiation levels caused by the presence of tailings. Subsequently, these properties are identified as candidate vicinity properties and are scheduled for radiological surveys subject to the property owner's consent. The comprehensive radiological surveys conducted at these vicinity properties determine the amount, type, and location of tailings materials. Structures on a vicinity property are carefully surveyed to determine the presence or absence of construction-related uses of tailings. If structural uses of tailings are found, air samples are analyzed for /sup 222/Rn progeny, short-term continuous /sup 222/Rn monitoring is instituted, and /sup 222/Rn flux rate from tailings are estimated. If warranted, long-term /sup 222/Rn and progeny measurements are made.

Goldsmith, W.A.; Yates, W.G.

1982-01-01T23:59:59.000Z

458

Engineering assessment of inactive uranium mill tailings: Phillips/United Nuclear site, Ambrosia Lake, New Mexico  

SciTech Connect

Ford, Bacon and Davis Utah, Inc., has reevaluated the Phillips/United Nuclear site in order to revise the December 1977 engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Ambrosia Lake, New Mexico. This engineering assessment has included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and radiation exposures of individuals and nearby populations, the investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas released from 2.6 million dry tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation also are factors. The four alternative actions presented in this engineering assessment range from millsite decontamination with the addition of 3 m of stabilization cover material, to removal of the tailings to remote disposal sites and decontamination of the tailings site. Cost estimates for the four options range from about $21,500,000 for stabilization in-place, to about $45,200,000 for disposal at a distance of about 15 mi. Three principal alternatives for the reprocessing of the Phillips/United Nuclear tailings were examined: heap leaching; treatment at an existing mill; and reprocessing at a new conventional mill constructed for tailings reprocessing.The cost of the uranium recovered would be about $87/lb of U/sub 3/O/sub 8/ by either heap leach or conventional plant process. The spot market price for uranium was $25/lb early in 1981. Reprocessing the Phillips/United Nuclear tailings for uranium recovery does not appear to be economically attractive under present or foreseeable market conditions.

Not Available

1981-10-01T23:59:59.000Z

459

Environmental assessment of remedial action at the slick rock Uranium Mill Tailings sites Slick Rock, Colorado  

SciTech Connect

The Uranium Mill Tailings Radiation Control Act of 1978 (42 USC {section} 7901 et seq.), hereafter referred to as the UMTRCA, authorized the U.S. Department of Energy (DOE) to clean up two uranium mill tailings processing sites near Slick Rock, Colorado, in San Miguel County. The purpose of the cleanup is to reduce the potential health effects associated with the radioactive materials remaining on the sites and on vicinity properties (VPs) associated with the sites. Contaminated materials cover an estimated 55 acres of the Union Carbide (UC) processing site and 12 ac of the North Continent (NC) processing site. The total estimated volume of contaminated materials is approximately 61 8,300 cubic yards. In addition to the contamination in the two processing site areas, four VPs were found to contain contamination. As a result of the tailings being exposed to the environment, contamination associated with the UC and NC sites has leached into shallow ground water. Surface water has not been affected. The closest residence is approximately 0.3 air mi from either site. The proposed action is to remediate the UC and NC sites by removing all contaminated materials within the designated site boundaries or otherwise associated with the sites, and relocating them to, and stabilizing them at, a location approximately 5 road mi (8 km) northeast of the sites on land administered by the Bureau of Land Management (BLM). Remediation would be performed by the DOE`s Uranium Mill Tailings Remedial Action (UMTRA) Project. All solid contaminated materials would be buried under 5 feet (ft) of rock and soil materials. The proposed disposal site area is currently used by ranchers for cattle grazing over a 7-month period. The closest residence to the proposed disposal site is 2 air mi. An estimated 44 ac of land would be permanently transferred from the BLM to the DOE and restricted from future use.

1994-09-01T23:59:59.000Z

460

The Gluon Green's function in N=4 supersymmetric Yang-Mills theory.  

E-Print Network (OSTI)

energy limit of scattering amplitudes in the N = 4 supersymmetric Yang– Mills theory is studied by solving the corresponding BFKL equation in the next– to–leading approximation. The gluon Green’s function is analysed using a newly proposed method suitable... (~ka) ??(~kb) f ( ~ka, ~kb,Y ? ln s s0 ) , (1) where s0 = |~ka||~kb| is the Regge scale. The energy dependence is determined by the universal process–independent gluon Green’s function f . The impact factors, ?,??, depend on the process under study...

Andersen, Jeppe R; Sabio Vera, Agustin

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

From Decay to Complete Breaking: Pulling the Strings in SU(2) Yang-Mills Theory  

Science Conference Proceedings (OSTI)

We study (2Q+1) strings connecting two static charges Q in (2+1)D SU(2) Yang-Mills theory. While the fundamental (2) string between two charges Q=(1/2) is unbreakable, the adjoint (3) string connecting two charges Q=1 can break. When a (4) string is stretched beyond a critical length, it decays into a (2) string by gluon pair creation. When a (5) string is stretched, it first decays into a (3) string, which eventually breaks completely. The energy of the screened charges at the ends of a string is well described by a phenomenological constituent gluon model.

Pepe, M. [INFN, Istituto Nazionale di Fisica Nucleare, Sezione di Milano-Bicocca, Edificio U2, Piazza della Scienza 3, 20126 Milano (Italy); Wiese, U.-J. [Center for Research and Education in Fundamental Physics, Institute for Theoretical Physics, Bern University, Sidlerstrasse 5, 3012 Bern (Switzerland); Institute for Theoretical Physics, ETH Zuerich, Schafmattstrasse 32, CH-8093 Zuerich (Switzerland)

2009-05-15T23:59:59.000Z

462

Environmental assessment of remedial action at the Maybell uranium mill tailings site near Maybell, Colorado  

SciTech Connect

The purpose of this environmental assessment (EA) is to evaluate the environmental impacts resulting from remedial action at the Maybell uranium mill tailings site near Maybell, Colorado. A biological assessment (Attachment 1) and a floodplain/wetlands assessment (Assessment 2) are included as part of this EA. The following sections and attachments describe the proposed action, affected environment, and environmental impacts associated with the proposed remedial action, including impacts to threatened and endangered species listed or proposed for listing by the US Fish and Wildlife Service.

Not Available

1993-09-01T23:59:59.000Z

463

Surface defects, the superconformal index and q-deformed Yang-Mills  

E-Print Network (OSTI)

Recently a prescription to compute the four-dimensional N = 2 superconformal index in the presence of certain BPS surface defects has been given. These surface defects are labelled by symmetric representations of SU(N). In the present paper we give a prescription to compute the superconformal index in the presence of surface defects labelled by arbitrary representations of SU(N). Furthermore, we extend the dictionary between the N = 2 superconformal Schur-index and correlators of q-deformed Yang-Mills to incorporate such surface defects.

Luis F. Alday; Mathew Bullimore; Martin Fluder; Lotte Hollands

2013-03-19T23:59:59.000Z

464

Reducing Stickies in Recycle Mills with Spark Technology: Applications at Visy Paper Company  

Science Conference Proceedings (OSTI)

A full-scale trial run over a month at Visy Paper, Conyers, Georgia, showed that a single sparker unit placed in the stuff box could reduce stickie deposition on the dryer felts. The felts were also much easier to clean. While the benefits were clear, the trial was too short to allow quantification in view of all the other variables. The mill plans to lease a unit for a longer (3-plus month) trial. Kinetic work shows that both sonification and sparking generate hydroxyl radicals. Since both processes als...

2000-12-01T23:59:59.000Z

465

CANADIAN EXPERIENCE IN THE MEASUREMENT AND CONTROL OF RADIATION HAZARDS IN URANIUM MINES AND MILLS  

SciTech Connect

Apparatases developed for field sampling and measurement of radon are described. A battery-operated air sampler for the collection of radon daughters is described along with a battery-operated, alpha scintillation detector for the measurement of radon daughter products. A method is presented for estimating rate of exposure to U from the excretion rate of U in urine, and evaluation of personnel exposed to U in mine and mill. The principles of airborne hazards control in Canadian mines are outlined and discussed in terms of ventilation, control of radon-laden water, and dust control. (W.L.H.)

Simpson, S.D.; Stewart, C.G.; Yourt, G.R.; Bloy, H.

1959-10-31T23:59:59.000Z

466

Environmental Assessment of Remedial Action at the Riverton Uranium Mill Tailings Site, Riverton, Wyoming  

Science Conference Proceedings (OSTI)

The US Department of Energy (DOE) has prepared an environmental assessment (DOE/EA-0254) on the proposed remedial action at the inactive uranium milling site near Riverton, Wyoming. Based on the analyses in the EA, the DOE has determined that the proposed action does not constitute a major Federal action significantly affecting the quality of the human environment within the meaning of the National Environmental Policy Act (NEPA) of 1969 (42 U.S.C. 4321, et seq.). Therefore, the preparation of an environmental impact statement (EIS) is not required.

none,

1987-06-01T23:59:59.000Z

467

Cytoskeletal reorganization induced by engagement of the NG2 proteoglycan leads to cell spreading and migration  

E-Print Network (OSTI)

Cells expressing the NG2 proteoglycan can attach, spread, and migrate on surfaces coated with NG2 mAbs, demonstrating that engagement of NG2 can trigger the cytoskeletal rearrangements necessary for changes in cell morphology and motility. Engagement of different epitopes of the proteoglycan results in distinct forms of actin reorganization. On mAb D120, the cells contain radial actin spikes characteristic of filopodial extension, whereas on mAb N143, the cells contain cortical actin bundles characteristic of lamellipodia. Cells that express NG2 variants lacking the transmembrane and cytoplasmic domains are unable to spread or migrate on NG2 mAb-coated surfaces, indicating that these portions of the molecule are essential for NG2-mediated signal transduction. Cells expressing an NG2 variant lacking the C-terminal half of the cytoplasmic domain can still spread normally on mAbs D120 and N143, suggesting that the membraneproximal cytoplasmic segment is responsible for this process. In contrast, this variant migrates poorly on mAb D120 and exhibits abnormal arrays of radial actin filaments decorated with fascin during spreading on this mAb. The C-terminal portion of the NG2 cytoplasmic domain, therefore, may be involved in regulating molecular events that are crucial for cell motility.

Xuexun Fang; Michael A. Burg; Diana Barritt; Akiko Nishiyama; William B. Stallcup; Thomas D. Pollard

1999-01-01T23:59:59.000Z

468

TERMS OF REFERENCE FP2020 WORKING GROUP ON COUNTRY ENGAGEMENT A. PURPOSE OF WORKING GROUP  

E-Print Network (OSTI)

The London Summit on Family Planning brought together partners representing country governments, donors, multilateral agencies, civil society and private sector organisations around an ambitious goal: to provide an additional 120 million women in the world’s poorest countries with access to voluntary family planning by 2020. Developing country leaders and other partners made transformative financial, policy and delivery commitments and $2.6bn in donor financing was pledged to enable millions more girls and women to use family planning information, services and supplies. The commitments made at the Summit will support the right of women and girls around the world to decide, freely and for themselves, whether, when and how many children they have. The purpose of the FP2020 Country Engagement Working Group is to work with existing partners to provide additional support to countries as they develop, implement, and monitor progress against their transformational family planning plans, building on existing country plans wherever possible, and within the context of countries ’ wider RMNCH and health sector plans. B. OBJECTIVES OF THE WORKING GROUP The Country Engagement Working Group, recognizes that there are partners on the ground working with governments and other partners in many areas within the TOR of the working group. The primary

unknown authors

2012-01-01T23:59:59.000Z

469

Control of the Accumulation of Non-Process Elements in Pulp Mills with Bleach Filtrate Reuse: A Chemical Equilibrium Approach to Predicting the Partitioning of Metals in Pulp Mill and Bleach Plant Streams  

DOE Green Energy (OSTI)

The overall goal of this project was to develop fundamental, experimentally based methods for predicting the solubility or organic and inorganic matter and their interactions in recycled effluent from kraft pulp mills and bleach plants. This included: characterizing the capacity of wood pulp and dissolved organic matter to bind metal ions, developing a thermodynamic database of properties needed to describe the solubility of inorganic matter in pulp mill streams, incorporation of the database into equilibrium calculation software for predicting the solubility of the metals of interest, and evaluating its capability to predict the distribution of the metals between pulp fibers, inorganic precipitates, and solution.

Frederick, W.J. Jr.; Rudie, A.W.; Schmidl, G.W.; Sinquefield, S.A.; Rorrer, G.L.; Laver, M.L.; Yantasee, W.; Ming, D.

2000-08-01T23:59:59.000Z

470

Improved Superconducting Properties in Bulk MgB2 Prepared by High Energy Milling of Mg and B Powder  

E-Print Network (OSTI)

Abstract. The MgB2 bulks were prepared by high energy milling of Mg and B powder. The correlations among milling times, microstructure and superconducting properties were investigated in MgB2 bulks. Samples were characterized by x-ray diffraction (XRD), energy dispersive spectrometry (EDX) and scanning electron microscope (SEM), and the magnetization properties were examined by a Superconducting quantum interfere device (SQUID) magnetometer. It showed that the high energy milling is an effective approach to get fine crystalline (40-100nm) bulk MgB2 with good grain connectivity and high Jc performance. The critical current density reaches to 2.0 × 106A/cm2 at 15K and 0.59T, 5.7 × 105A/cm2 at 2T

Y. F. Wu; Y. F. Lu; G. Yan; J. S. Li; Y. Feng; H. P. Tang; S. K. Chen; H. L. Xu; C. S. Li; P. X. Zhang

2006-01-01T23:59:59.000Z

471

Engineering solutions to the long-term stabilization and isolation of uranium mill tailings in the United States  

SciTech Connect

Engineering solutions to the safe and environmentally protective disposal and isolation of uranium mill tailings in the US include many factors. Cover design, materials selection, civil engineering, erosive forces, and cost effectiveness are only a few of those factors described in this paper. The systems approach to the engineering solutions employed in the US is described, with emphasis on the standards prescribed for the Uranium Mill Tailings Remedial Action Project. Stabilization and isolation of the tailings from humans and the environment are the primary goals of the US uranium mill tailings control standards. The performance of cover designs with respect to water infiltration, radon exhalation, geotechnical stability, erosion protection, human and animal intrusion prevention, and longevity are addressed. The need for and frequency of surveillance efforts to ensure continued disposal system performance are also assessed.

Sanders, D.R. [Morrison Knudsen Environmental Services, San Francisco, CA (United States). UMTRA Project; Lommler, J.C. [AGRA Earth and Environmental, Inc., Albuquerque, NM (United States). UMTRA Project

1995-03-01T23:59:59.000Z

472

Andrew Mills  

NLE Websites -- All DOE Office Websites (Extended Search)

are represented here yet. Publications 2013 Wiser, Ryan H., and Mark Bolinger. 2012 Wind Technologies Market Report, Edited by Galen L. Barbose, Nam Darghouth, Ben Hoen,...

473

Corn Milling  

Science Conference Proceedings (OSTI)

... From this analysis, Product Line Leaders target customers and markets and ... has hired experts from the feed, sugar, fermentation, biofuels, and corn ...

474

Feasibility study for low-head hydropower on the Mill River, Northampton, Massachusetts  

DOE Green Energy (OSTI)

Five existing dams along a 6.5-mile reach of the Mill River in the City of Northampton, Massachusetts were studied to assess the feasibility of developing the sites for low-head hydroelectric power generation. Each of the dams was inspected to evaluate existing conditions and necessary work required to rehabilitate the structures. Analyses of hydrology and power potential were carried out and a packaged tube turbine-generator unit was found to be suitable for installation at all sites. Project layouts were developed making maximum use of existing structures and natural and man-made features. Capital and operation and maintenance costs were estimated based on the project layouts and the selected turbine-generator units. Financial analyses were performed using a set of baseline assumptions. Sensitivity tests of alternative assumptions were also prepared, along with analyses of assistance program alternatives. Finally, the legal, environmental, and socio-institutional considerations affecting development of the hydro projects were identified and reviewed. Hydro developments on the Mill River were found to be technically feasible, presenting no extraordinary engineering, environmental, or legal problems. However, none of these projects, either individually or jointly, would be financially feasible without substantial assistance in the form of capital grants.

None

1979-01-01T23:59:59.000Z

475

An object oriented code for simulating supersymmetric Yang--Mills theories  

E-Print Network (OSTI)

Discretization of supersymmetric Yang--Mills (SYM) theories is an old problem in lattice field theory. It has resisted solution until recently when new ideas drawn from orbifold constructions and topological field theories have been brought to bear on the question. The result has been the creation of a new class of lattice gauge theories in which the lattice action is invariant under one or more supersymmetries. The resultant theories are local, free of doublers and also possess exact gauge-invariance. In principle they form the basis for a truly non-perturbative definition of the continuum SYM theories. In the continuum limit they lead to a version of the Yang-Mills theory formulated in terms of {\\it twisted} fields. In this paper, we briefly review these ideas and then go on to describe the details of a C++ code, which can be used to simulate these theories. We sketch the design of the code, with particular emphasis being placed on SYM theories with $\\cN=2$ in two dimensions and $\\cN=4$ in three and four dimensions, making one-to-one comparisons between the essential components of the SYM theories and their corresponding counterparts appearing in the simulation

Simon Catterall; Anosh Joseph

2011-08-06T23:59:59.000Z

476

Environmental assessment of remedial action at the Lowman Uranium Mill Tailings Site near Lowman, Idaho. Final  

SciTech Connect

This document assesses the environmental impacts of stabilization on site of the contaminated materials at the Lowman uranium mill tailings site. The Lowman site is 0.5 road mile northeast of the unincorporated village of Lowman, Idaho, and 73 road miles from Boise, Idaho. The Lowman site consists of piles of radioactive sands, an ore storage area, abandoned mill buildings, and windblown/waterborne contaminated areas. A total of 29.5 acres of land are contaminated and most of this land occurs within the 35-acre designated site boundary. The proposed action is to stabilize the tailings and other contaminated materials on the site. A radon barrier would be constructed over the consolidated residual radioactive materials and various erosion control measures would be implemented to ensure the long-term stability of the disposal cell. Radioactive constituents and other hazardous constituents were not detected in the groundwater beneath the Lowman site. The groundwater beneath the disposal cell would not become contaminated during or after remedial action so the maximum concentration limits or background concentrations for the contaminants listed in the draft EPA groundwater protection standards would be met at the point of compliance. No significant impacts were identified as a result of the proposed remedial action at the Lowman site.

Not Available

1991-01-01T23:59:59.000Z

477

Project licensing plan for UMTRA (Uranium Mill Tailings Remedial Action) sites  

SciTech Connect

The purpose of the Uranium Mill Tailings Remedial Action (UMTRA) Project Licensing Plan is to establish how a disposal site will be licensed, and to provide responsibilities of participatory agencies as legislated by the Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978 (Public Law 95-604). This Plan has been developed to ensure that the objectives of licensing are met by identifying the necessary institutional controls, participatory agency responsibilities, and key milestones in the licensing process. The Plan contains the legislative basis for and a description of the licensing process ( Process'') for UMTRA sites. This is followed by a discussion of agency responsibilities, and milestones in the Process. The Plan concludes with a generic timeline of this Process. As discussed in Section 2.1, a custodial maintenance and surveillance plan will constitute the basis for a site license. The details of maintenance and surveillance are discussed in the Project Maintenance and Surveillance Plan (AL-350124.0000). 5 refs., 4 figs.

Not Available

1984-07-01T23:59:59.000Z

478

Forage uptake of uranium series radionuclides in the vicinity of the anaconda uranium mill  

Science Conference Proceedings (OSTI)

Radiochemical analysis was performed on samples of soil and eight species of common vegetation growing on the Anaconda uranium mill site, located in New Mexico. The concentrations of the long-lived radionuclides U-238, U-234, Th-230, Ra-226, and Pb-210 in these forage plants were determined. The sampling procedures and analytical laboratory methods used are described. The highest radionuclide concentration found in a forage species was 130 pCi of Ra-226 per gram dry weight for grass growing on the main tailings pile at Anaconda, where the surface soil activity of Ra-226 was 236 pCi/g. A comparison of shoots activity with that of roots and soil was used to determine a distribution index and uptake coefficient for each species. The distribution index, the ratio of root activity to shoot activity, ranged from 0.30 (Th-230) in galleta grass (Hilaria jamesii) to 38.0 (Ra-226) in Indian ricegrass (Oryzopsis hymenoides). In nearly all instances, the roots contained higher radionuclide concentrations. The uptake coefficient, the ratio of vegetation activity to soil activity, ranged from 0.69 (U-238) in Indian ricegrass roots to 0.01 (U-238) in four-wing saltbush (Atriplex canescans) shoots. The range of radionuclide concentrations in plants growing on the Anaconda mill site is compared to that in vegetation from a control site 20 km away.

Rayno, D.R.; Momeni, M.H.; Sabau, C.

1980-01-01T23:59:59.000Z

479

Holographic quark-antiquark potential in hot, anisotropic Yang-Mills plasma  

E-Print Network (OSTI)

Using the gauge/gravity duality we calculate the heavy quark-antiquark potential in a hot, anisotropic and strongly coupled Yang-Mills plasma in (3+1)-dimensions. As the anisotropic medium we take a deformed version of \\mathcal{N} = 4 super Yang-Mills theory at finite temperature following a recent work where the dual type IIB supergravity solution is also proposed. We turn on a small value of the anisotropy parameter, for which the gravity dual is known analytically (perturbatively), and compute the velocity-dependent quark-antiquark interaction potential when the pair is moving through the plasma with a velocity v. By setting v = 0 we recover the static quark-antiquark potential. We numerically study how the potential is modified in the presence of anisotropy. We further show numerically how the quark-antiquark separation (both in the static and the velocity-dependent case) and hence, the screening length gets modified by anisotropy. We discuss various cases depending upon the direction of the dipole and the direction of its propagation and make a comparative study of these cases. We are also able to obtain an analytical expression for the screening length of the dipole moving in a hot, anisotropic plasma in a special case.

Somdeb Chakraborty; Najmul Haque

2012-12-12T23:59:59.000Z

480

Value Added Products from Hemicellulose Utilization in Dry Mill Ethanol Plants  

Science Conference Proceedings (OSTI)

The Iowa Corn Promotion Board is the principal contracting entity for this grant funded by the US Department of Agriculture and managed by the US Department of Energy. The Iowa Corn Promotion Board subcontracted with New Jersey Institute of Technology, KiwiChem, Pacific Northwest National Lab and Idaho National Lab to conduct research for this project. KiwiChem conducted the economic engineering assessment of a dry-mill ethanol plant. New Jersey Institute of Technology conducted work on incorporating the organic acids into polymers. Pacific Northwest National Lab conducted work in hydrolysis of hemicellulose, fermentation and chemical catalysis of sugars to value-added chemicals. Idaho National Lab engineered an organism to ferment a specific organic acid. Dyadic, an enzme company, was a collaborator which provided in-kind support for the project. The Iowa Corn Promotion Board collaborated with the Ohio Corn Marketing Board and the Minnesota Corn Merchandising Council in providing cost share for the project. The purpose of this diverse collaboration was to integrate the hydrolysis, the conversion and the polymer applications into one project and increase the likelihood of success. This project had two primary goals: (1) to hydrolyze the hemicellulose fraction of the distillers grain (DG) coproduct coming from the dry-mill ethanol plants and (2) convert the sugars derived from the hemicellulose into value-added co-products via fermentation and chemical catalysis.

Rodney Williamson, ICPB; John Magnuson, PNNL; David Reed, INL; Marco Baez, Dyadic; Marion Bradford, ICPB

2007-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "veneer mills engaged" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Conditions for exact equivalence of Kaluza-Klein and Yang-Mills theories  

E-Print Network (OSTI)

Although it is well known that Kaluza-Klein and Yang-Mills theories define equivalent structures on principal bundles, the general conditions for equivalence of their Lagrangians have not been explicitly stated. In this paper we address the conditions for equivalence. The formulation of these conditions is based on previous work in which the Dirac and Einstein equations were unified in a tetrad formulation of the Kaluza-Klein model. This Kaluza-Klein model is derived from mapping a bispinor field to a set of SL(2,R) x U(1) gauge potentials and a complex scalar field. (A straightforward derivation of this map using Hestenes' tetrad for the spin connection in a Riemannian space-time is included in this paper.) Investigation of this Kaluza-Klein model reveals two general conditions for establishing an exact equivalence between Kaluza-Klein and Yang-Mills theories. The first condition is that only horizontal vector fields occur in the Kaluza-Klein Lagrangian. The second is that the scalar curvature be restricted to a sum over horizontal sectional curvatures. We conclude that all known fields (including fermion fields) can then be represented as components of a Kaluza-Klein metric together with scalar fields.

Frank Reifler; Randall Morris

2007-07-25T23:59:59.000Z

482

Summary report on reprocessing evaluation of selected inactive uranium mill tailings sites  

SciTech Connect

Sandia National Laboratories has been assisting the Department of Energy in the Uranium Mill Tailings Remedial Actions Program (UMTRAP) the purpose of which is to implement the provisions of Title I of Public Law 95-604, Uranium Mill Tailings Radiation Control Act of 1978.'' As part of this program, there was a need to evaluate the mineral concentration of the residual radioactive materials at some of the designated processing sites to determine whether mineral recovery would be practicable. Accordingly, Sandia contracted Mountain States Research and Development (MSRD), a division of Mountain States Mineral Enterprises, to drill, sample, and test tailings at 12 sites to evaluate the cost of and the revenue that could be derived from mineral recovery. UMTRAP related environmental and engineering sampling and support activities were performed in conjunction with the MSRD operations. This summary report presents a brief description of the various activities in the program and of the data and information obtained and summarizes the results. 8 refs., 9 tabs.

Not Available

1983-09-01T23:59:59.000Z

483

Use of Residual Solids from Pulp and Paper Mills for Enhancing Strength and Durability of Ready-Mixed Concrete  

SciTech Connect

This research was conducted to establish mixture proportioning and production technologies for ready-mixed concrete containing pulp and paper mill residual solids and to study technical, economical, and performance benefits of using the residual solids in the concrete. Fibrous residuals generated from pulp and paper mills were used, and concrete mixture proportions and productions technologies were first optimized under controlled laboratory conditions. Based on the mixture proportions established in the laboratory, prototype field concrete mixtures were manufactured at a ready-mixed concrete plant. Afterward, a field construction demonstration was held to demonstrate the production and placement of structural-grade cold-weather-resistant concrete containing residual solids.

Tarun R. Naik; Yoon-moon Chun; Rudolph N. Kraus

2003-09-18T23:59:59.000Z

484

http://www.mills.edu/ACAD_INFO/MCS/SPERTUS/Parasite/parasite.html Appearing in The Sixth International World Wide Web Conference, April 1997.  

E-Print Network (OSTI)

be searching for pages with the full name as anchor text and following the associated links. #12;http://www.mills.edu/ACAD_INFOhttp://www.mills.edu/ACAD_INFO/MCS/SPERTUS/Parasite/parasite.html 1 of 13 Appearing in The Sixth make use of only the text on pages, ignoring valuable information implicitly contained in links

Spertus, Ellen