Sample records for vending machines phone

  1. Seattle City Light- Vending Machine Rebate Program

    Broader source: Energy.gov [DOE]

    Seattle City Light offers qualifying customers $80 rebates for the purchase of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending...

  2. Covered Product Category: Refrigerated Beverage Vending Machines...

    Energy Savers [EERE]

    ENERGY STAR product specification applies to new and remanufactured indoor (i.e., glass front) and indooroutdoor (i.e., solid front) refrigerated beverage vending machines....

  3. Vending Machine Energy Consumption and VendingMiser Evaluation

    E-Print Network [OSTI]

    Ritter, J.; Hugghins, J.

    2000-01-01T23:59:59.000Z

    As an effort to decrease the amount of non-critical energy used on the Texas A&M campus, and to assist Dixie Narco in evaluating the efficiency of their vending machines, the Texas A&M Energy Systems Laboratory investigated the power consumption...

  4. Covered Product Category: Refrigerated Beverage Vending Machines

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including refrigerated beverage vending machines, which are covered by the ENERGY STAR® program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  5. Milk Advertising, Vending Machine Purchases, and Their Health Implications

    E-Print Network [OSTI]

    Gvillo, Rejeana

    2014-07-24T23:59:59.000Z

    : Complete Demand System Summary Statistics ............................................. 22 Table 2: Expenditure Endogeneity Parameter Estimates (Equation 13) ...................... 27 Table 3: QUAIDS Parameter Estimates (Equation 16... ............................ 84 xii Table 26: Comparison of Actual Vending Expenditures to Predicted Expenditures Exogenous Model ......................................................................................... 85 Table 27: Tobit Estimation, Marginal...

  6. UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into Waste Reducing Vending Machine

    E-Print Network [OSTI]

    UBC Social Ecological Economic Development Studies (SEEDS) Student Report An Investigation into Waste Reducing Vending Machine Pens, Pencils, and Highlighters Trent Pehlke Richard Schaap Kurt Knudson with the UBC community. The reader should bear in mind that this is a student project/report

  7. 2014-08-01 Issuance: Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines; Notice of Proposed Rulemaking and public meeting

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of proposed rulemaking and public meeting regarding test procedures for refrigerated bottled or canned beverage vending machines, as issued by the Deputy Assistant Secretary for Energy Efficiency on August 1, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  8. 2014-08-01 Issuance: Energy Conservation Standard for Refrigerated Bottled or Canned Beverage Vending Machines; Notice of Public Meeting and Availability of the Preliminary Technical Support Document

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register notice of public meeting and availability of the preliminary technical support document for refrigerated bottled or canned beverage vending machines, as issued by the Deputy Assistant Secretary for Energy Efficiency on August 1, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

  9. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    SciTech Connect (OSTI)

    Fridley, David; Zheng, Nina; Zhou, Nan

    2010-06-01T23:59:59.000Z

    Since the late 1970s, energy labeling programs and mandatory energy performance standards have been used in many different countries to improve the efficiency levels of major residential and commercial equipment. As more countries and regions launch programs covering a greater range of products that are traded worldwide, greater attention has been given to harmonizing the specific efficiency criteria in these programs and the test methods for measurements. For example, an international compact fluorescent light (CFL) harmonization initiative was launched in 2006 to focus on collaboration between Australia, China, Europe and North America. Given the long history of standards and labeling programs, most major energy-consuming residential appliances and commercial equipment are already covered under minimum energy performance standards (MEPS) and/or energy labels. For these products, such as clothes washers and CFLs, harmonization may still be possible when national MEPS or labeling thresholds are revised. Greater opportunity for harmonization exists in newer energy-consuming products that are not commonly regulated but are under consideration for new standards and labeling programs. This may include commercial products such as water dispensers and vending machines, which are only covered by MEPS or energy labels in a few countries or regions. As China continues to expand its appliance standards and labeling programs and revise existing standards and labels, it is important to learn from recent international experiences with efficiency criteria and test procedures for the same products. Specifically, various types of standards and labeling programs already exist in North America, Europe and throughout Asia for products in China's 2010 standards and labeling programs, namely clothes washers, water dispensers, vending machines and CFLs. This report thus examines similarities and critical differences in energy efficiency values, test procedure specifications and other technical performance requirements in existing international programs in order to shed light on where Chinese programs currently stands and considerations for their 2010 programs.

  10. Beverage Vending Machines | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The FutureCommentsEnergyand Sustained CoordinationWater Pilot

  11. Covered Product Category: Refrigerated Beverage Vending Machines |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: Theof"Wave theJuly 30, 2013DepartmentEnterprise ServersHotDepartment of

  12. Vending Machine Controls | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies

  13. A right to vend : new policy framework for fostering street based entrepreneurs in New York City

    E-Print Network [OSTI]

    Liu, Ya-Ting, M.C.P. Massachusetts Institute of Technology

    2007-01-01T23:59:59.000Z

    Street vending remains one of the most highly regulated and least understood activities in New York City. The current regulatory framework is overly confusing and complex, leaving policy decisions about who gets to vend ...

  14. List of Vending Machine Controls Incentives | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf KilaueaInformation Other Alternative FuelEnergysource HistoryList

  15. Many types of electronic products such as computers, cathode ray tubes (CRT), fax machines, printers, LCD monitors, microwave ovens, VCRs, stereos, and cell phones contain hazardous

    E-Print Network [OSTI]

    George, Steven C.

    lead and mercury. Recycling electronic waste (eWaste) protects our environment from heavy metal" or "Universal Waste ­ Electronic Waste" and include the date when the waste was first generated. eWaste mustMany types of electronic products such as computers, cathode ray tubes (CRT), fax machines

  16. Phone Sex

    E-Print Network [OSTI]

    Flamingo

    1995-01-01T23:59:59.000Z

    Phone Se by Flamingo art by KOZ PrmtedinUSA $SJ fS wv) p?l iSI PHCNE %t\\ By flamingo Illustrated by KOZ Editors: Tosya Stohn La Gavia Text & Titles: Jazz Printer: Kinko's ofGrand Rapids, MI Authorized Distributor Tb

  17. Lamar Fleming 564 1 1 UH Vending Locations

    E-Print Network [OSTI]

    Azevedo, Ricardo

    Melcher Hall 528 2 2 1 1 Moody Towers South 584 2 1 Moody Towers North 584 2 2 Moores School of Music 520 Energy Research Park Bldg. 2 & 3 have beverage and snack machines. 506506 537 Beverage, Ice Cream #12;

  18. Emergency phones, exterior residence hall phones, and pay phones Pay-by-Space Parking

    E-Print Network [OSTI]

    Emergency phones, exterior residence hall phones, and pay phones Pay-by-Space Parking Meter Parking Pay-by- Space Parking VehicleThoroughfares N Pitkin Street Lake Street College Avenue Underpass Annual

  19. A First Look at Cellular Machine-to-Machine Traffic Large Scale Measurement and Characterization

    E-Print Network [OSTI]

    Liu, Alex X.

    of businesses and applications such as telematics, smart metering, point-of-sale terminals, and home security Machine-to-Machine (M2M) commu- nication is fast becoming a market-changing force for a wide spectrum traffic resulting in bursty aggregate traffic volumes, and are less mobile compared to smart- phones

  20. Cell Phone Detection Techniques

    SciTech Connect (OSTI)

    Pratt, Richard M.; Bunch, Kyle J.; Puzycki, David J.; Slaugh, Ryan W.; Good, Morris S.; McMakin, Douglas L.

    2007-10-01T23:59:59.000Z

    A team composed of Rick Pratt, Dave Puczyki, Kyle Bunch, Ryan Slaugh, Morris Good, and Doug McMakin teamed together to attempt to exploit cellular telephone features and detect if a person was carrying a cellular telephone into a Limited Area. The cell phone’s electromagnetic properties were measured, analyzed, and tested in over 10 different ways to determine if an exploitable signature exists. The method that appears to have the most potential for success without adding an external tag is to measure the RF spectrum, not in the cell phone band, but between 240 and 400MHz. Figures 1- 7 show the detected signal levels from cell phones from three different manufacturers.

  1. Mobile phone companies sell more batteries than phones to

    E-Print Network [OSTI]

    Starner, Thad E.

    Mobile phone companies sell more batteries than phones to consumers. The devices users buy gen- erally include rechargeable batteries so that they are immediately useful. On average, however, the consumer must own more than one battery during the phone's life. The same is probably true for laptops

  2. Human-Robot-Communication and Machine Learning

    E-Print Network [OSTI]

    Demiris, Yiannis

    be obtained from today's industrial robots. However, to enable new robot applications with emphasis on serviceHuman-Robot-Communication and Machine Learning Abbr. title: Human-Robot-Communication and ML Volker for Real-Time Computer Systems and Robotics Kaiserstr. 12 D-76128 Karlsruhe, Germany Phone: +49 721 608

  3. Electric machine

    DOE Patents [OSTI]

    El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

    2012-07-17T23:59:59.000Z

    An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

  4. Waste Toolkit A-Z Mobile phones

    E-Print Network [OSTI]

    Melham, Tom

    Waste Toolkit A-Z Mobile phones How to recycle your mobile phone Recycling your mobile phone makes the deep forests in the Congo in central Africa. The Congo's mining business has in recent years led and recycling can help to reduce the demand for new raw materials. Do not put mobile phones in the recycling

  5. Machine therapy

    E-Print Network [OSTI]

    Dobson, Kelly E. (Kelly Elizabeth), 1970-

    2007-01-01T23:59:59.000Z

    Machine Therapy is a new practice combining art, design, psychoanalysis, and engineering work in ways that access and reveal the vital, though often unnoticed, relevance of people's interactions and relationships with ...

  6. EA-1674: Finding of No Significant Impact

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines

  7. Texas A&M Transportation Institute | 2012 Page | 1 Seven transit providers in the Central Puget Sound region came together to develop the ORCA fare card system.

    E-Print Network [OSTI]

    in the Central Puget Sound region came together to develop the ORCA fare card system. The providers include outlets, phone, ticket vending machines, or ORCA customer service offices. History The Central Puget Sound to honor paper transfers. In 1999, Sound Transit and the region developed the PugetPass, which

  8. Mobile phone and my health

    SciTech Connect (OSTI)

    Surducan, Aneta [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania)] [Nicolae Balcescu High School, 6 Constanta St., 400158 Cluj-Napoca (Romania); Dabala, Dana [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania)] [National Railways Medical Clinic,, Occupational Medicine Department, 16-20 Republicii St., 400015 Cluj-Napoca (Romania); Neamtu, Camelia, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Vasile, E-mail: emanoil.surducan@itim-cj.ro; Surducan, Emanoil, E-mail: emanoil.surducan@itim-cj.ro [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)] [National Institute for Research and Development of Isotopic and Molecular Technologies, 65-103 Donath St., 400293 Cluj-Napoca (Romania)

    2013-11-13T23:59:59.000Z

    The interaction of the microwave radiation emitted by mobile phones with the user's body is analyzed from the International Commission on Non-Ionizing Radiation Protection (ICNIRP) recommendations perspective as a correlation between the specific absorption ratio (SAR) of the mobile phone and the call duration. The relative position of the cell phone to the user's body, the dielectric properties of the exposed body parts, the SAR value and the call duration are considered in the local body temperature rise due to the microwave heating effect. The recommended local temperature rise limit in the human body is evaluated according to standards. The aim of this study is to disseminate information to young people, especially high school students, about the microwave thermal effects on the human body, to make them aware of the environmental electromagnetic pollution and to offer them a simple method of biological self protection.

  9. Batteries, mobile phones & small electrical devices

    E-Print Network [OSTI]

    , mobile phones and data collection equipment. Lithium Ion batteries are used in mobile phones, laptopsBatteries, mobile phones & small electrical devices IN-BUILDING RECYCLING STATIONS. A full list of acceptable items: Sealed batteries ­excludes vented NiCad and Lead acid batteries Cameras Laser printer

  10. EMERGENCY PHONE NUMBERS Medical Emergency

    E-Print Network [OSTI]

    Chou, James

    /Illness 4. Fire/Smoke/Explosion 5. Utility Disruption 6. Threat 7. Suspicious Package/Item 8. Hazardous Operations Center (617) 495-5560 · Fire/Smoke/Explosion · Flooding · Hazardous Material · Utility Failure. Describe the type of emergency (fire, medical, utility disruption, public safety, etc). Give the phone

  11. Induction machine

    DOE Patents [OSTI]

    Owen, Whitney H. (Ogden, UT)

    1980-01-01T23:59:59.000Z

    A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

  12. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    E-Print Network [OSTI]

    Fridley, David

    2010-01-01T23:59:59.000Z

    wash performance, water extraction, etc. ) during whichand spin extraction processes as well as heating water is

  13. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    E-Print Network [OSTI]

    Fridley, David

    2010-01-01T23:59:59.000Z

    Australia uses a national test procedure based on IEC 60456 for its MEPS and mandatory energy and water efficiencyEnergy Star revisions. In 2005, Australia adopted mandatory water efficiency

  14. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    E-Print Network [OSTI]

    Fridley, David

    2010-01-01T23:59:59.000Z

    in the Energy Star, Australia, Brazil and EU programs butBesides Energy Star, all China, Australia, Brazil and EUBrazil, South Korea and Australia also have mandatory energy

  15. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs

    E-Print Network [OSTI]

    Fridley, David

    2010-01-01T23:59:59.000Z

    rated power. Australia’s high efficiency power factor andof 0.55. Australia, Brazil and the EU have additional powerrated power and in the cases of China, Japan, and Australia,

  16. Course info Machine Learning

    E-Print Network [OSTI]

    Shi, Qinfeng "Javen"

    info 2 Machine Learning What's Machine Learning? Types of Learning Overfitting Occam's Razor 3 Real's Machine Learning? Types of Learning Overfitting Occam's Razor Machine Learning Using data to uncover Real life problems What's Machine Learning? Types of Learning Overfitting Occam's Razor Formulation

  17. The iPhone Goes Downstream: Mandatory Universal Distribution?

    E-Print Network [OSTI]

    Karp, Larry; Perloff, Jeffrey

    2011-01-01T23:59:59.000Z

    Paper 1125 The iPhone Goes Downstream: mandatory universalauthor(s). The iPhone Goes Downstream: Mandatory UniversaliPhones using a single downstream vendor prompted calls for

  18. Contributions of Cell Phones to Economic Development in

    E-Print Network [OSTI]

    Anderson, Richard

    Contributions of Cell Phones to Economic Development in Africa: An Information Study of Corn · Background · Motivation · research questions/hypotheses · Framework · Methodology · Contributions to impact corn growers cell phone usage · RH 2: Agricultural information carried on cell phone is more

  19. 1 Addressing Blindness via Cell Phones

    E-Print Network [OSTI]

    -evaluation eye diagnostic tool that attaches to a cell phone and uses a light-scattering technique to scan1 Addressing Blindness via Cell Phones 2 Welcome Letter 3 15 Years of SDM 4 Product Requirements for Contemporary Challenges > Using Systems Thinking to Fuel High-Velocity Organizations > Applying Systems

  20. PublicSafety Phone Calls

    E-Print Network [OSTI]

    person could be encour- aging to the caller. 10.Report Harassing Calls to Your Telephone Company to file a report. Place Ads with Caution. Don't ex- tend the call trying to figure out who is calling does not need to know your name and/or num- ber. Purchase an Answering Machine. As we all know

  1. Austin Energy Dials Down Home Energy Use With Smart Phones |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Austin Energy Dials Down Home Energy Use With Smart Phones Austin Energy Dials Down Home Energy Use With Smart Phones bbrnstoriesaustinenergy9-2-14.jpg Better Buildings...

  2. Flotation machine

    SciTech Connect (OSTI)

    Zlobin, M.N.; Permyakov, G.P.; Nemarov, A.A.; Metsik, V.M.; Medetsky, J.V.; Taraban, N.T.

    1993-08-10T23:59:59.000Z

    A flotation machine is described for beneficiating minerals comprising: a vertical cylindrical chamber for circulating a flotation pulp; a downwardly tapered bottom connected to said vertical cylindrical chamber; feed pipe means for feeding the flotation pulp carrying mineral particles of fine fraction, particles of the useful ingredient of the fine fraction being capable of floating up from the volume of said aerated pulp; discharge pipe means connected to the tapered bottom near its lowest point for discharging gangue; an annular trough for collecting froth concentrate at the top of said chamber; a group of frustoconical shells each having bases of different diameters and a tapered surface secured axially in said chamber and spaced equidistantly from one another height wise of said chamber; aerator means for aerating the flotation pulp secured to the walls of said chamber and communicating therewith to provide aerated water into said chamber; means for feeding mineral particles of coarse fraction, particles of the useful ingredient of the coarse fraction being capable of floating in the froth layer of the flotation pulp, in the form of a hydrocyclone having a cylindrical casing positioned axially over said chamber and a downwardly tapering outlet directed downwardly to feed the coarse particles to said chamber; feed pipe means for feeding the flotation pulp carrying mineral particles of coarse fraction positioned tangentially at said cylindrical casing of the hydrocyclone; and evacuation means for evacuating the liquid phase of the flotation pulp positioned tangentially at said casing of the hydrocyclone over said feed pipe means and connected to said feed pipe means for feeding the flotation pulp carrying mineral particles of the fine fraction.

  3. SDEMPED 2005 Symposium on Diagnostics for Electric Machines, Power Electronics and Drives

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    'H`eres, France Phone: +33-476827132 Fax: +33-476826384 Email: pierre.granjon@lis.inpg.fr Abstract--Stator frame different physical informations, such a processing could be interesting to further analyze each component independently, and finally diagnose induction machine faults more easily. This paper deals with a new processing

  4. Machine LearningMachine Learning Stephen Scott

    E-Print Network [OSTI]

    Scott, Stephen D.

    represents if-then rules num-of-wheelsnon-truck hauls-cargo relative-height truck yesno non-truck non-truck about trucks & combines Memorizes: But will he recognize others? #12;1/21/2004 Stephen Scott, Univ is MachineAgain, what is Machine Learning?Learning? Given several labeled examples of a concept ­ E.g. trucks

  5. LISP Machine Progress Report

    E-Print Network [OSTI]

    Bawden, Alan

    1977-08-01T23:59:59.000Z

    This informal paper introduces the LISP Machine, describes the goals and current status of the project, and explicates some of the key ideas. It covers the LISP machine implementation, LISP as a system language, ...

  6. DRILLING MACHINES GENERAL INFORMATION

    E-Print Network [OSTI]

    Gellman, Andrew J.

    TC 9-524 Chapter 4 DRILLING MACHINES GENERAL INFORMATION PURPOSE This chapter contains basic information pertaining to drilling machines. A drilling machine comes in many shapes and sizes, from small hand-held power drills to bench mounted and finally floor-mounted models. They can perform operations

  7. Internal Turing Machines

    E-Print Network [OSTI]

    Ken Loo

    2004-07-28T23:59:59.000Z

    Using nonstandard analysis, we will extend the classical Turing machines into the internal Turing machines. The internal Turing machines have the capability to work with infinite ($*$-finite) number of bits while keeping the finite combinatoric structures of the classical Turing machines. We will show the following. The internal deterministic Turing machines can do in $*$-polynomial time what a classical deterministic Turing machine can do in an arbitrary finite amount of time. Given an element of $\\in HALT$ (more precisely, the $*$-embedding of $HALT$), there is an internal deterministic Turing machine which will take $$ as input and halt in the $"yes"$ state. The language ${}^*Halt$ can not be decided by the internal deterministic Turing machines. The internal deterministic Turing machines can be viewed as the asymptotic behavior of finite precision approximation to real number computations. It is possible to use the internal probabilistic Turing machines to simulate finite state quantum mechanics with infinite precision. This simulation suggests that no information can be transmitted instantaneously and at the same time, the Turing machine model can simulate instantaneous collapse of the wave function. The internal deterministic Turing machines are powerful, but if $P \

  8. Residential Clothes Dryers | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    dryerappendixdv1.1.xlsx More Documents & Publications Illuminated Exit Signs Beverage Vending Machines Residential Clothes Dryer (Appendix D2...

  9. Analysis of Potential Energy Saving and CO2 Emission Reduction of Home Appliances and Commercial Equipments in China

    E-Print Network [OSTI]

    Zhou, Nan

    2011-01-01T23:59:59.000Z

    heat pump water heater, rangehoods, ventilating fans, external power supply, vending machines, LED lamps, grid lighting, commercial

  10. EA-1674: Final Environmental Assessment

    Broader source: Energy.gov [DOE]

    10 CFR 431 Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines

  11. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

    2001-01-01T23:59:59.000Z

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  12. Prof. Roger Wattenhofer phone +41 44 632 6312

    E-Print Network [OSTI]

    contact us by email or phone. Advisors Philipp Sommer sommer@tik.ee.ethz.ch 044 632 7838 Roland Flury

  13. Design of Vitrification Machine

    E-Print Network [OSTI]

    McDonald, Todd William

    2009-11-30T23:59:59.000Z

    ), and if it is capable of reliably and repeatedly controlling the Petri Dish Tray. These tests will serve to evaluate both the machine’s physical design as well as its software design. Along with the machine’s actual function, its overall design will be evaluated... the specimen is then moved through of series of Petri dishes containing cryo-protectant fluids, generally up to four (personal interview, Medical Advisor, Dr. Kim), using tweezers (alternatively, a pipette system may be employed). The technician must monitor...

  14. Mobile Phone Based Drifting Lagrangian Flow Sensors

    E-Print Network [OSTI]

    predicting the outcome and impact of silt disturbed by dredging operations; maintaining the health of fish a new approach to the design of low-cost floating sensors for hydrodynamic studies, leveraging low-cost mobile phone sensor platforms have recently been developed to provide low-cost sensor data collection [1

  15. Diamond machine tool face lapping machine

    DOE Patents [OSTI]

    Yetter, H.H.

    1985-05-06T23:59:59.000Z

    An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

  16. Machine tool evaluation and machining operation development

    SciTech Connect (OSTI)

    Morris, T.O. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Kegg, R. [Cincinnati Milacron Marketing Co., OH (United States)

    1997-03-15T23:59:59.000Z

    The purpose of this CRADA was to support Cincinnati Milacron`s needs in fabricating precision components, from difficult to machine materials, while maintaining and enhancing the precision manufacturing skills of the Oak Ridge Complex. Oak Ridge and Cincinnati Milacron personnel worked in a team relationship wherein each contributed equally to the success of the program. Process characterization, control technologies, machine tool capabilities, and environmental issues were the primary focus areas. In general, Oak Ridge contributed a wider range of expertise in machine tool testing and monitoring, and environmental testing on machining fluids to the defined tasks while Cincinnati Milacron personnel provided equipment, operations-specific knowledge and shop-floor services to each task. Cincinnati Milacron was very pleased with the results of all of the CRADA tasks. However, some of the environmental tasks were not carried through to a desired completion due to an expanding realization of need as the work progressed. This expansion of the desired goals then exceeded the time length of the CRADA. Discussions are underway on continuing these tasks under either a Work for Others agreement or some alternate funding.

  17. Optimization Online - Enclosing Machine Learning

    E-Print Network [OSTI]

    Wei Xunkai

    2007-10-20T23:59:59.000Z

    Oct 20, 2007 ... Abstract: This report introduces a new machine learning paradigm called enclosing machine learning for data mining. This novel method ...

  18. Electric Machine R&D

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Throughout this process, ideas have been stimulated for even more highly advanced machines. * The machine will be built and evaluated in FY09 and subsequently made...

  19. Some relations between quantum Turing machines and Turing machines

    E-Print Network [OSTI]

    Andrés Sicard; Mario Vélez

    1999-12-06T23:59:59.000Z

    For quantum Turing machines we present three elements: Its components, its time evolution operator and its local transition function. The components are related with the components of deterministic Turing machines, the time evolution operator is related with the evolution of reversible Turing machines and the local transition function is related with the transition function of probabilistic and reversible Turing machines.

  20. MACHINE AND FOUNDRY COMPANY

    Office of Legacy Management (LM)

    MACHINE AND FOUNDRY COMPANY kt '- : :' ENGINEERING DIVISIOJ ---. Cl FIELD iRIP ,REP@?T ,' i;:z;zy MEETING REPORT : .I.-.-' Y ::,:I :. &, .I7 ENGINEERING REPORT- : T, ...

  1. Machine Translation for Twitter 

    E-Print Network [OSTI]

    Jehl, Laura Elisabeth

    2010-11-24T23:59:59.000Z

    We carried out a study in which we explored the feasibility of machine translation for Twitter for the language pair English and German. As a first step we created a small bilingual corpus of 1,000 tweets. Using this ...

  2. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N.; Chomyszak, Stephen M.

    2005-06-07T23:59:59.000Z

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  3. Human-machine interactions

    DOE Patents [OSTI]

    Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

    2009-04-28T23:59:59.000Z

    Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

  4. Doubly fed induction machine

    DOE Patents [OSTI]

    Skeist, S. Merrill; Baker, Richard H.

    2005-10-11T23:59:59.000Z

    An electro-mechanical energy conversion system coupled between an energy source and an energy load including an energy converter device having a doubly fed induction machine coupled between the energy source and the energy load to convert the energy from the energy source and to transfer the converted energy to the energy load and an energy transfer multiplexer coupled to the energy converter device to control the flow of power or energy through the doubly fed induction machine.

  5. Metalworking and machining fluids

    DOE Patents [OSTI]

    Erdemir, Ali (Naperville, IL); Sykora, Frank (Caledon, ON, CA); Dorbeck, Mark (Brighton, MI)

    2010-10-12T23:59:59.000Z

    Improved boron-based metal working and machining fluids. Boric acid and boron-based additives that, when mixed with certain carrier fluids, such as water, cellulose and/or cellulose derivatives, polyhydric alcohol, polyalkylene glycol, polyvinyl alcohol, starch, dextrin, in solid and/or solvated forms result in improved metalworking and machining of metallic work pieces. Fluids manufactured with boric acid or boron-based additives effectively reduce friction, prevent galling and severe wear problems on cutting and forming tools.

  6. Sealing intersecting vane machines

    DOE Patents [OSTI]

    Martin, Jedd N. (Providence, RI); Chomyszak, Stephen M. (Attleboro, MA)

    2007-06-05T23:59:59.000Z

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

  7. Machine Learning: Foundations and Algorithms

    E-Print Network [OSTI]

    Ben-David, Shai

    with accident prevention systems that are built using machine learning algorithms. Machine learning is also to us). Machine learning tools are concerned with endowing programs with the ability to "learn if the learning process succeeded or failed? The second goal of this book is to present several key machine

  8. Could a machine think

    SciTech Connect (OSTI)

    Churchland, P.M.; Churchland, P.S. (Univ. of California, San Diego (USA))

    1990-01-01T23:59:59.000Z

    There are many reasons for saying yes. One of the earliest and deepest reason lay in two important results in computational theory. The first was Church's thesis, which states that every effectively computable function is recursively computable. The second important result was Alan M. Turing's demonstration that any recursively computable function can be computed in finite time by a maximally simple sort of symbol-manipulating machine that has come to be called a universal Turing machine. This machine is guided by a set of recursively applicable rules that are sensitive to the identity, order and arrangement of the elementary symbols it encounters as input. The authors reject the Turing test as a sufficient condition for conscious intelligence. They base their position of the specific behavioral failures of the classical SM machines and on the specific virtues of machines with a more brain-like architecture. These contrasts show that certain computational strategies have vast and decisive advantages over others where typical cognitive tasks are concerned, advantages that are empirically inescapable. Clearly, the brain is making systematic use of these computational advantage. But it need not be the only physical system capable of doing so. Artificial intelligence, in a nonbiological but massively parallel machine, remain a compelling and discernible prospect.

  9. The economics of cell phone reuse and recycling

    E-Print Network [OSTI]

    Geyer, Roland; Doctori Blass, Vered

    2010-01-01T23:59:59.000Z

    helps us understand the business models and drivers as welldiscusses the resulting business model of cell phone take-there are viable business models around both activities. In

  10. Lightweight social communication using visual media and mobile phones

    E-Print Network [OSTI]

    Cowan, Lisa G.

    2011-01-01T23:59:59.000Z

    comfortable handing their personal device over to anotherThese ubiquitous, personal devices have the capability tothe mobile phone is a personal device, it is possible that

  11. A Case for Leveraging 802.11p for Direct Phone-to-Phone Communications

    E-Print Network [OSTI]

    Choi, Pilsoon

    WiFi cannot effectively handle the demands of device-to-device communication between phones, due to insufficient range and poor reliability. We make the case for using IEEE 802.11p DSRC instead, which has been adopted for ...

  12. Extreme ultraviolet lithography machine

    DOE Patents [OSTI]

    Tichenor, Daniel A. (Castro Valley, CA); Kubiak, Glenn D. (Livermore, CA); Haney, Steven J. (Tracy, CA); Sweeney, Donald W. (San Ramon, CA)

    2000-01-01T23:59:59.000Z

    An extreme ultraviolet lithography (EUVL) machine or system for producing integrated circuit (IC) components, such as transistors, formed on a substrate. The EUVL machine utilizes a laser plasma point source directed via an optical arrangement onto a mask or reticle which is reflected by a multiple mirror system onto the substrate or target. The EUVL machine operates in the 10-14 nm wavelength soft x-ray photon. Basically the EUV machine includes an evacuated source chamber, an evacuated main or project chamber interconnected by a transport tube arrangement, wherein a laser beam is directed into a plasma generator which produces an illumination beam which is directed by optics from the source chamber through the connecting tube, into the projection chamber, and onto the reticle or mask, from which a patterned beam is reflected by optics in a projection optics (PO) box mounted in the main or projection chamber onto the substrate. In one embodiment of a EUVL machine, nine optical components are utilized, with four of the optical components located in the PO box. The main or projection chamber includes vibration isolators for the PO box and a vibration isolator mounting for the substrate, with the main or projection chamber being mounted on a support structure and being isolated.

  13. Property:PhoneNumber | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form History Facebook icon Twitter iconNumOfPlants JumpPhoneNumber Jump to:

  14. Micro-machined resonator

    DOE Patents [OSTI]

    Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

    1993-03-30T23:59:59.000Z

    A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

  15. Z Machine | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    Defense Programs Research, Development, Test, and Evaluation Inertial Confinement Fusion ICF Facilities Z Machine Z Machine Air-gas breakdown when Z Machine at Sandia...

  16. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, O.T.; Lowry, M.E.

    1999-01-05T23:59:59.000Z

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

  17. Intersecting vane machines

    DOE Patents [OSTI]

    Bailey, H. Sterling; Chomyszak, Stephen M.

    2007-01-16T23:59:59.000Z

    The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through meshing surfaces without the need for external gearing by modifying the function of one or the other of the rotors from that of "fluid moving" to that of "valving" thereby reducing the pressure loads and associated inefficiencies at the interface of the meshing surfaces. The inventions described herein relate to these improvements.

  18. Automated fiber pigtailing machine

    DOE Patents [OSTI]

    Strand, Oliver T. (Castro Valley, CA); Lowry, Mark E. (Castro Valley, CA)

    1999-01-01T23:59:59.000Z

    The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectonic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems.

  19. Precision Robotic Assembly Machine

    ScienceCinema (OSTI)

    None

    2010-09-01T23:59:59.000Z

    The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

  20. MOBILE PHONE USE AND TEMPORAL SKIN HEAT SENSATION

    E-Print Network [OSTI]

    Boyer, Edmond

    in the phone by the battery currents and running of the radiofrequency (RF) electronic circuits measured the temperature of the temporal skin due to GSM 1800 MHz MP radiated power (125 mW). We suppressed of the heat produced in the phone by the battery currents and running of the radiofrequency (RF) electronic

  1. Eye-Gaze Interaction for Mobile Phones Heiko Drewes

    E-Print Network [OSTI]

    Eye-Gaze Interaction for Mobile Phones Heiko Drewes Media Informatics Group Amalienstr. 17, 80333 the use of eye-gaze tracking technology for mobile phones. In particular we investigate how gaze interaction can be used to control applications on handheld devices. In contrast to eye-tracking systems

  2. The Dark Side of Mobile Phones August 3, 2010

    E-Print Network [OSTI]

    Carlini, David

    is convenient, but often makes for a poor nutritional choice. Deep-water rigs increase the world's access to oil, using cross-cultural data. To situate the study within the larger field of mobile phone research, we begin with a brief overview of mobile telephony in historical and social context. Mobile Phones

  3. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Silver, Whendee

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff February 2010 Abstract Apple's decision to market iPhones using a single downstream vendor has prompted vendors. We show that an upstream monopoly might want to use one or more downstream vendors, and society

  4. The iPhone Goes Downstream: Mandatory Universal Distribution

    E-Print Network [OSTI]

    Karp, Larry S.

    The iPhone Goes Downstream: Mandatory Universal Distribution Larry S. Karp Jeffrey M. Perloff December 2011 Abstract Apple's original decision to market iPhones using a single downstream vendor prompted calls for mandatory universal distribution (MUD), whereby all downstream vendors would sell the i

  5. Laser machining of explosives

    DOE Patents [OSTI]

    Perry, Michael D. (Livermore, CA); Stuart, Brent C. (Fremont, CA); Banks, Paul S. (Livermore, CA); Myers, Booth R. (Livermore, CA); Sefcik, Joseph A. (Tracy, CA)

    2000-01-01T23:59:59.000Z

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  6. Operating the Lisp Machine

    E-Print Network [OSTI]

    Moon, David A.

    This document is a draft copy of a portion of the Lisp Machine window system manual. It is being published in this form now to make it available, since the complete window system manual is unlikely to be finished in the ...

  7. MACHINE MONITORING USING PROBABILITY THRESHOLDS

    E-Print Network [OSTI]

    Pollock, Stephen

    MACHINE MONITORING USING PROBABILITY THRESHOLDS AND SYSTEM OPERATING CHARACTERISTICS Stephen M and Jeffrey M. Alden G.M. R&D Center Warren, MI 48090 IOE Tech Report 95-14 #12;1. Introduction We a discrete-part production machine, with the objective of effectively determining when to shut the machine

  8. Optimization Online - Machine Learning for Global Optimization

    E-Print Network [OSTI]

    Andrea Cassioli

    2009-07-23T23:59:59.000Z

    Jul 23, 2009 ... We propose to use a Support Vector Machine (although different machine ... Citation: Technical report - Global Optimization Laboratory, ...

  9. A Cognitive Phased Array Using Smart Phone Control

    E-Print Network [OSTI]

    Jensen, Jeffrey

    2012-07-16T23:59:59.000Z

    Cognitive radio networks require the use of computational resources to reconfigure transmit/receive parameters to improve communication quality of service or efficiency. Recent emergence of smart phones has made these resources more accessible...

  10. Phone: 817-272-3381 Fax: 817-272-5190

    E-Print Network [OSTI]

    Texas at Arlington, University of

    and waste 3. Propane tanks 4. Discarded over the counter cold medicines 5. Anti-freeze containers 6. Drain, Texas 76019 Phone: 817-272-3381 Fax: 817-272-5190 Meth Labs Stash House Indicators Drug Distribution

  11. The economics of cell phone reuse and recycling

    E-Print Network [OSTI]

    Geyer, Roland; Doctori Blass, Vered

    2010-01-01T23:59:59.000Z

    for the disposal of WEEE. EngD Thesis, Centre forphones in the context of WEEE. Proceedings of Going Greena by-product of reuse. Keywords WEEE . Cell phones . Reuse .

  12. Understanding energy consumption of sensor enabled applications on mobile phones

    E-Print Network [OSTI]

    Hartman

    Recent research in ubiquitous and mobile computing uses mobile phones and wearable accelerometers to monitor individuals' physical activities for personalized and proactive health care. The goal of this project is to measure ...

  13. Development of Electrochemical Micro Machining

    E-Print Network [OSTI]

    Srinivas Sundarram, Sriharsha

    2008-10-10T23:59:59.000Z

    . Micro electrochemical machining (µECM) removes material while holding micron tolerances and µECM can machine hard metals and alloys. This study aims at developing a novel µECM utilizing high frequency voltage pulses and closed loop control... DEVELOPMENT OF ELECTROCHEMICAL MICRO MACHINING A Thesis by SRIHARSHA SRINIVAS SUNDARRAM Submitted to the Office of Graduate Studies of Texas A&M University in partial fulfillment of the requirements for the degree of MASTER...

  14. Machine Learning for Global Optimization

    E-Print Network [OSTI]

    schoen,,,

    Noname manuscript No. (will be inserted by the editor). Machine Learning for Global Optimization. A. Cassioli?. · D. Di Lorenzo. ?. · M. Locatelli. ??. · F. Schoen.

  15. Harvesting Machine Census 1999 & 2001

    E-Print Network [OSTI]

    1 Harvesting Machine Census 1999 & 2001 231 Corstorphine Road Edinburgh EH12 7AT www.forestry.gov.uk FCTN001 SUMMARY This Technical Note contains information on the 1999 and 2001 harvesting machine censuses. As 31% fewer returns were received in 2001 a meaningful comparison of numbers cannot be made

  16. Materialization of Universal Turing Machines

    E-Print Network [OSTI]

    Forum Paderborn, Germany #12;Contents Alan Turing's relation to Germany Turing Machines Hasenjaeger was -- unknowingly -- Alan Turing's one-man counterpart for the security of the ENIGMA on the German side #12;Alan Turing: His time ahead 1936: Defines a programmable Machine and solves the Entscheidungsproblem (On

  17. Environmental constituents of Electrical Discharge Machining

    E-Print Network [OSTI]

    Cho, Margaret H. (Margaret Hyunjoo), 1982-

    2004-01-01T23:59:59.000Z

    Electrical Discharge Machining (EDM) is a non-traditional process that uses no mechanical forces to machine metals. It is extremely useful in machining hard materials. With the advantages EDM has to offer and its presence ...

  18. Using Mobile Phone Data for Electricity Infrastructure Planning

    E-Print Network [OSTI]

    Martinez-Cesena, Eduardo Alejandro; Ndiaye, Mamadou; Schläpfer, Markus

    2015-01-01T23:59:59.000Z

    Detailed knowledge of the energy needs at relatively high spatial and temporal resolution is crucial for the electricity infrastructure planning of a region. However, such information is typically limited by the scarcity of data on human activities, in particular in developing countries where electrification of rural areas is sought. The analysis of society-wide mobile phone records has recently proven to offer unprecedented insights into the spatio-temporal distribution of people, but this information has never been used to support electrification planning strategies anywhere and for rural areas in developing countries in particular. The aim of this project is the assessment of the contribution of mobile phone data for the development of bottom-up energy demand models, in order to enhance energy planning studies and existing electrification practices. More specifically, this work introduces a framework that combines mobile phone data analysis, socioeconomic and geo-referenced data analysis, and state-of-the-...

  19. Property:RAPID/Contact/ID7/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/PhoneID7/Phone" Showing 2

  20. Data-stationary pipelined machine

    SciTech Connect (OSTI)

    Abdou, I.E.

    1984-01-01T23:59:59.000Z

    The paper presents the data-stationary control concept of pipelined machines, with emphasis on its application in image processing systems. A parallel array of pipelined machines for image processing is considered, and data-stationary control is compared with time-stationary control. A system is proposed that is a parallel array of pipelined machines. Each pipeline is a multifunctional, statically configured, data-stationary device. The pipelines do not accommodate branching instructions or interrupts, and the design focus on vector processing only. The system can be used in other applications such as signal processing and arithmetic number crunching. 5 references.

  1. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12T23:59:59.000Z

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  2. A comparison of phone and grapheme-based spoken term detection 

    E-Print Network [OSTI]

    Wang, Dong; Frankel, Joe; Tejedor, Javier; King, Simon

    2008-01-01T23:59:59.000Z

    text corpora. We present experiments on Spanish and English data, comparing phone and grapheme-based STD. For Spanish, where phone and grapheme-based systems give similar transcription word error rates (WERs), grapheme-based STD significantly...

  3. *Name: Date of Birth: Banner/Student ID # Social Security # Phone: Cell

    E-Print Network [OSTI]

    Gering, Jon C.

    Transmitted Infection Anemia Eye Disease (excluding glasses) Joint Disease/Injury Sickle Cell Trait*Name: Date of Birth: Banner/Student ID # Social Security # Phone: Cell Permanent Address: Home Age, contact: Name Relationship: Phone: Day____________________ Eve____________________ Cell

  4. Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155

    E-Print Network [OSTI]

    Ghajar, Afshin J.

    Raman P. Singh School of Mechanical and Aerospace Engineering Phone (Tulsa): 918.594.8155 Oklahoma State University Phone (Stillwater): 405.744.1825 700 N. Greenwood Avenue, Tulsa, OK 74106 raman

  5. Lakeland Electric- Commercial Conservation Rebate Program

    Broader source: Energy.gov [DOE]

    Lakeland Electric offers several incentives for commercial customers to save energy in eligible facilities. Rebates are available for vending machine controllers, facility system upgrades and...

  6. Japan's Residential Energy Demand Outlook to 2030 Considering Energy Efficiency Standards "Top-Runner Approach"

    E-Print Network [OSTI]

    Komiyama, Ryoichi

    2008-01-01T23:59:59.000Z

    Space Heaters, Gas Cooking Appliances, Gas Water Heaters,Oil Water Heaters, Electric Toilet Seats, Vending MachinesFlorescent Lights Gas Water Heaters Oil Water Heaters

  7. --No Title--

    Broader source: Energy.gov (indexed) [DOE]

    daylight harvesting; installing occupancy sensors; converting existing signs to light emitting diode (LED) ones; and installing vending machine misers. This project leverages...

  8. Sanden Vendo America: Noncompliance Determination (2014-SE-52002...

    Office of Environmental Management (EM)

    bottled or canned beverage vending machine model Vue30 (with 1128127 cassette refrigeration deck) does not comport with the energy conservation standards. DOE determined the...

  9. Sanden Vendo America: Notice of Allowance (2014-SE-52002) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    bottled or canned beverage vending machine model Vue30 (with 1128127 cassette refrigeration deck) after Sanden Vendo America provided documentation showing that it had...

  10. Diamond turning machine controller implementation

    SciTech Connect (OSTI)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01T23:59:59.000Z

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  11. Development of Electrochemical Micro Machining 

    E-Print Network [OSTI]

    Srinivas Sundarram, Sriharsha

    2008-10-10T23:59:59.000Z

    The machining of materials on micrometer and sub-micrometer scale is considered the technology of the future. The current techniques for micro manufacturing mostly are silicon based. These manufacturing techniques are not suitable for use...

  12. Defending Mobile Phones from Proximity Malware Gjergji Zyba, Geoffrey M. Voelker

    E-Print Network [OSTI]

    Technology La Jolla, CA, USA pjohansson@soe.ucsd.edu Abstract--As mobile phones increasingly becomeDefending Mobile Phones from Proximity Malware Gjergji Zyba, Geoffrey M. Voelker Department propagate in an entirely distributed fashion. In this paper we consider the dynamics of mobile phone malware

  13. Smart Phones for the Elders: Boosting the Intelligence of Smart Homes

    E-Print Network [OSTI]

    Helal, Abdelsalam

    Smart Phones for the Elders: Boosting the Intelligence of Smart Homes William Mann, OTR, Ph that adopts the emerging smart phones technology as an effective booster of the utility of smart homes, warnings and calls for help. We also present our smart phone/home architecture and describe our efforts

  14. Local Transition Functions of Quantum Turing Machines

    E-Print Network [OSTI]

    Masanao Ozawa; Harumichi Nishimura

    2000-12-26T23:59:59.000Z

    Foundations of the notion of quantum Turing machines are investigated. According to Deutsch's formulation, the time evolution of a quantum Turing machine is to be determined by the local transition function. In this paper, the local transition functions are characterized for fully general quantum Turing machines, including multi-tape quantum Turing machines, extending the results due to Bernstein and Vazirani.

  15. Transportation Mode Detection using Mobile Phones and GIS Information

    E-Print Network [OSTI]

    Wolfson, Ouri E.

    Transportation Mode Detection using Mobile Phones and GIS Information Leon Stenneth, Ouri Wolfson, Chicago, IL 60607-7053 {lstennet, wolfson, psyu, boxu} @cs.uic.edu ABSTRACT The transportation mode. In this paper, we propose an approach to inferring a user's mode of transportation based on the GPS sensor

  16. Mobile phone-induced honeybee worker piping Daniel FAVRE

    E-Print Network [OSTI]

    waves originating from mobile phones were tested for potential effects on honeybee behavior. Mobile Honeybees are essential partners for the success of agriculture. The economical role of honeybees, pollen or nectar dearth), drought, monocultural practices, migratory stress (brought about by the moving

  17. Scan with your phone for a mobile campus map.

    E-Print Network [OSTI]

    Noble, William Stafford

    Scan with your phone for a mobile campus map. Drumheller Fountain Portage Bay Lake Washington Ship Meany Schmitz Hansee Haggett North Physics Laboratory Portage Bay Parking Facility Odegaard Undergrad South Experimental Education Unit PortageBayBuilding South Cam pus Center OceanTch. M arine Sciences

  18. Towards Socially Aware Mobile Phones Alessandra Toninelli1

    E-Print Network [OSTI]

    Madiraju, Praveen

    based on Semantic Web technologies. 1 Introduction Social bindings characterize each individual's life of other individuals within the framework of a so-called social network. Technology advances in portable useless interruptions and possible socially embarrassing situations. The mobile phone has great potential

  19. IEEE Communications Magazine July 2002108 Standardization of Mobile Phone

    E-Print Network [OSTI]

    Han, Richard Y.

    -FLT. INTRODUCTION The U.S. Federal Communications Commission (FCC) has made Emergency 911 (E911) a mandatoryIEEE Communications Magazine · July 2002108 Standardization of Mobile Phone Positioning for 3G of the important features of the 3G mobile communication system. Many valuable location- based services can

  20. Driving directions to the Nizkorodov lab at UCI Study the campus maps (http://www.uci.edu/visit/maps/) to find the easiest way to get to the campus.

    E-Print Network [OSTI]

    Nizkorodov, Sergey

    and park by the parking permit vending machine, which is labeled n the map by a black star. Buy a perking permit in thins machine and park your car in any place labeled "visitor". · Option 2: enter lot 16 from Bison, and by a perking permit. The vending machine is labeled by a star. You may park your car in any

  1. Alpha Channeling in Mirror Machines

    SciTech Connect (OSTI)

    Fisch N.J.

    2005-10-19T23:59:59.000Z

    Because of their engineering simplicity, high-?, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

  2. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, W.H.; Ganoe, C.W.

    1999-08-17T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

  3. Mobile machine hazardous working zone warning system

    DOE Patents [OSTI]

    Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

    1999-01-01T23:59:59.000Z

    A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

  4. Cooling system for rotating machine

    DOE Patents [OSTI]

    Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

    2011-08-09T23:59:59.000Z

    An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

  5. APPLICATION OF MACHINE LEARNING FOR MACHINE MONITORING AND DIAGNOSIS

    E-Print Network [OSTI]

    Maluf, David A.

    of machine failure of the pump, the relative pump health can be deter­ mined. 1 INTRODUCTION The focus of pump was selected for study as there was a comprehensive set of vibration data available covering. In addition to this vibration data, Shell also provided detailed maintenance logs providing information

  6. What is Machine Learning? About the Course Example Machine Learning

    E-Print Network [OSTI]

    Kjellström, Hedvig

    of the course Written exam (tentamen) Four labs Bonus Points Each lab finished (successfully examined) before its deadline gives one bonus point. Max bonus (=4) raises the final grade one step. Bonus can not save you from F (failed). Bonus points can not be saved to next year. What is Machine Learning? About

  7. What is Machine Learning? About the Course Example Machine Learning

    E-Print Network [OSTI]

    Kjellström, Hedvig

    of the course Written exam (tentamen) Four labs Bonus Points Each lab finished (successfully examined) before its deadline gives one bonus point. Max bonus (=4) raises the final grade one step. Bonus can not save you from F (failed). Bonus points can not be saved to next year. #12;What is Machine Learning? About

  8. Simulations of Quantum Turing Machines by Quantum Multi-Stack Machines

    E-Print Network [OSTI]

    Daowen Qiu

    2005-06-06T23:59:59.000Z

    As was well known, in classical computation, Turing machines, circuits, multi-stack machines, and multi-counter machines are equivalent, that is, they can simulate each other in polynomial time. In quantum computation, Yao [11] first proved that for any quantum Turing machines $M$, there exists quantum Boolean circuit $(n,t)$-simulating $M$, where $n$ denotes the length of input strings, and $t$ is the number of move steps before machine stopping. However, the simulations of quantum Turing machines by quantum multi-stack machines and quantum multi-counter machines have not been considered, and quantum multi-stack machines have not been established, either. Though quantum counter machines were dealt with by Kravtsev [6] and Yamasaki {\\it et al.} [10], in which the machines count with $0,\\pm 1$ only, we sense that it is difficult to simulate quantum Turing machines in terms of this fashion of quantum computing devices, and we therefore prove that the quantum multi-counter machines allowed to count with $0,\\pm 1,\\pm 2,...,\\pm n$ for some $n>1$ can efficiently simulate quantum Turing machines. Therefore, our mail goals are to establish quantum multi-stack machines and quantum multi-counter machines with counts $0,\\pm 1,\\pm 2,...,\\pm n$ and $n>1$, and particularly to simulate quantum Turing machines by these quantum computing devices.

  9. Cell phone, blackberry, or other electronic device use while driving. Common sense tells us that handling and dialing cell phones while driving compromises safety,

    E-Print Network [OSTI]

    Powers, Robert

    Cell phone, blackberry, or other electronic device use while driving. Common sense tells us of electronic communication devices (navigational systems entry, cell phones including text messaging, email, or other electronic device for voice communications while the vehicle is in motion: o Use should be kept

  10. Integrated Inverter For Driving Multiple Electric Machines

    SciTech Connect (OSTI)

    Su, Gui-Jia [Knoxville, TN; Hsu, John S [Oak Ridge, TN

    2006-04-04T23:59:59.000Z

    An electric machine drive (50) has a plurality of inverters (50a, 50b) for controlling respective electric machines (57, 62), which may include a three-phase main traction machine (57) and two-phase accessory machines (62) in a hybrid or electric vehicle. The drive (50) has a common control section (53, 54) for controlling the plurality of inverters (50a, 50b) with only one microelectronic processor (54) for controlling the plurality of inverters (50a, 50b), only one gate driver circuit (53) for controlling conduction of semiconductor switches (S1-S10) in the plurality of inverters (50a, 50b), and also includes a common dc bus (70), a common dc bus filtering capacitor (C1) and a common dc bus voltage sensor (67). The electric machines (57, 62) may be synchronous machines, induction machines, or PM machines and may be operated in a motoring mode or a generating mode.

  11. Polar Warnings A Lifelike Machine

    E-Print Network [OSTI]

    melting here and in the Arctic can help to forecast the effects of global warming and lead to mitigation from the efforts of employees at all levels across the Laboratory. Los Alamos has demonstrated A UNIQUE APPROACH TO MAKING "NANO-MACHINES" THAT MIMIC LIVING CELLS DIALOGUE SPOTLIGHTS 22The Global Energy

  12. Machine learning onMachine learning onMachine learning onMachine learning on accelerator simulation dataaccelerator simulation data

    E-Print Network [OSTI]

    · Plasma acceleration: ­ LWFA: compact source of high-energy Energy 6MeV 32009 DOE Computer Graphics Forum to acceleration, given space and energy variables. · Goal: use machine learning to automate detection of compact (highest energy) group of particles in simulations; · Material: millions of particles in plasma under

  13. The Fusion Machine (extended abstract)

    E-Print Network [OSTI]

    Gardner, Philippa

    directly. In the fusion machine, only channels exist at runtime. Channels may be remote, or co to rendezvous at the chan- nel. Execution amounts to the heating of a term (a directed implementation, rendezvous can result in explicit fusions, namely equational concurrent constraints on names. Upon heating

  14. Where Machine and Detector Meet

    E-Print Network [OSTI]

    Quigg, Chris

    University of Oregon #12;Beam Delivery System => EDRBeam Delivery System => EDR Andrei Seryi for BDS Area Delivery System => EDR Andrei Seryi for BDS Area leaders Deepa Angal-Kalinin, A.S., Hitoshi Yamamotop g Is M2 NE DetectorView MachineView #12;Beam Delivery System => EDRBeam Delivery System => EDR Andrei

  15. An Advanced Induction Machine Model for Predicting Inverter-Machine Interaction

    E-Print Network [OSTI]

    Chapman, Patrick

    An Advanced Induction Machine Model for Predicting Inverter-Machine Interaction [31 [41 [51 [6] [7 saturntion d d d d d d d d d d d d d d d d d d d d d d d Leakage inductance saturation as a function of flux- tion machine model specifically designed for use with inverter models to study machin

  16. Nano-Machines Achieve Huge Mechanical Breakthrough

    E-Print Network [OSTI]

    Leigh, David A.

    NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

  17. Lean Green Skating Machine Report No. 1

    E-Print Network [OSTI]

    Levi, Anthony F. J.

    Lean Green Skating Machine Report No. 1 Lean Green Skating Machine Report No. 1 Submitted by Simon Page 1 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating Machine Report No. 1 Page 2 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating

  18. Method and apparatus for monitoring machine performance

    DOE Patents [OSTI]

    Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

    1996-01-01T23:59:59.000Z

    Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

  19. On Halting Process of Quantum Turing Machine

    E-Print Network [OSTI]

    Takayuki Miyadera; Masanori Ohya

    2003-02-07T23:59:59.000Z

    We prove that there is no algorithm to tell whether an arbitrarily constructed Quantum Turing Machine has same time steps for different branches of computation. We, hence, can not avoid the notion of halting to be probabilistic in Quantum Turing Machine. Our result suggests that halting scheme of Quantum Turing Machine and quantum complexity theory based upon the existing halting scheme sholud be reexamined.

  20. Debugging Fortran on a shared memory machine

    SciTech Connect (OSTI)

    Allen, T.R.; Padua, D.A.

    1987-01-01T23:59:59.000Z

    Debugging on a parallel processor is more difficult than debugging on a serial machine because errors in a parallel program may introduce nondeterminism. The approach to parallel debugging presented here attempts to reduce the problem of debugging on a parallel machine to that of debugging on a serial machine by automatically detecting nondeterminism. 20 refs., 6 figs.

  1. Unsupervised Segmentation for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Unsupervised Segmentation for Statistical Machine Translation Siriwan Sereewattana TH E U N I V E R for statistical machine translation. The approach requires no language- nor domain-specific knowledge whatsoever in principle the statistical framework of machine translation can be ap- plied to any language pair

  2. Greening academia: Use and disposal of mobile phones among university students

    SciTech Connect (OSTI)

    Ongondo, F.O. [School of Civil Engineering and the Environment, University of Southampton, Lanchester Building, University Rd., Highfield, SOUTHAMPTON, Hampshire SO17 1BJ (United Kingdom); Williams, I.D., E-mail: idw@soton.ac.uk [School of Civil Engineering and the Environment, University of Southampton, Lanchester Building, University Rd., Highfield, SOUTHAMPTON, Hampshire SO17 1BJ (United Kingdom)

    2011-07-15T23:59:59.000Z

    Research highlights: > Students use/disposal of mobile phones was assessed via a large-scale survey and a takeback trial. > We estimate 3.7 m phones stockpiled by UK students; 29.3 and 28.1 m stockpiled for Europe and USA. > Many students replace phones at least once a year; only a small number have used a takeback service. > Monetary incentives have greatest influence over willingness to utilise takeback services. > Universities should partner with established operators to conduct targeted takeback services. - Abstract: Mobile phones have relatively short lifecycles and are rapidly seen as obsolete by many users within little over a year. However, the reusability of these devices as well as their material composition means that in terms of mass and volume, mobile phones represent the most valuable electronic products that are currently found in large numbers in waste streams. End-of-life mobile phones are a high value (from a reuse and resource perspective), high volume (quantity), low cost (residual monetary value) and transient (short lifecycle) electronic product. There are very large numbers of higher education (mainly university) students in the world - there are >2.4 million in the UK alone, 19 million in Europe and 18.2 million in the USA - and they often replace their mobile phones several times before graduation. Thus, because of the potentially significant environmental and economic impacts, a large scale survey of students at 5 UK universities was conducted to assess the behaviour of students with regard to their use and disposal of mobile phones. Additionally, a small scale trial mobile phone takeback service at one of the universities was carried out. The findings indicate that many students replace their phones at least once a year; replacing broken phones, getting upgrades from network operators, remaining 'fashionable' and a desire to have a handset with a longer battery life are the main reasons for such rapid replacement. Almost 60% of replaced phones are not sent to reuse or recycling operations but are stockpiled by students mainly as spare/backup phones. Approximately 61% of students own an extra mobile phone with male students replacing their phones more often than females. In particular, the results highlight the potentially huge stockpile of mobile phones - and consequently valuable supplies of rare metals - being held by the public; we estimate that there are 3.7 million phones stockpiled by students in UK higher education alone (29.3 and 28.1 million stockpiled, respectively, for Europe and USA). Although many students are aware of UK mobile phone takeback services, only a moderate number have previously used the services. Students' recycling of other waste materials such as paper and glass did not have a significant impact on their disposal actions for their unwanted mobile phones, although students who often recycled these waste materials were also the most willing to participate in mobile phone takeback services. Monetary incentives such as cash payments and vouchers have the greatest influence over students' willingness to utilise takeback services, followed by convenience and ease of use of the services. The paper discusses these findings as well as the outcome of the trial mobile phone takeback. It is suggested that universities should partner with established takeback operators to conduct event-based mobile phone takeback services primarily targeting students. Lessons from mobile phone takeback applicable to takeback services for end-of-life gadgets similar to mobile phones are also discussed.

  3. Specimen coordinate automated measuring machine/fiducial automated measuring machine

    DOE Patents [OSTI]

    Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

    1991-01-01T23:59:59.000Z

    The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

  4. Substantially Parallel Flux Uncluttered Rotor Machines (U-Machine)

    Energy Innovation Portal (Marketing Summaries) [EERE]

    2010-02-03T23:59:59.000Z

    A general concern based on the supply and demand trend of the permanent magnet (PM) raw materials suggests the need for elimination of these materials from electric motors (and generators) to control future costs. This invention discloses a new motor topology that eliminates the PM. Other innovations include brushless adjustable field excitation for high starting torque, field weakening, and power factor improvement and novel locks for higher peak speed. This novel machine shows promising...

  5. KU Public Safety Office Criminal Damage

    E-Print Network [OSTI]

    in the damage of a Coca-Cola vending machine in the Parking Services lobby at 1501 Irving Hill Drive and damage to Coca-Cola vending machines across the campus. Suspect Description: W/M, 5 feet 10 inches, 150

  6. Building Location Aware Apps on the iPhone

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced MaterialsEnergy,Envelope SHARE Building Envelopes MFEL.jpgiPhone

  7. Property:Incentive/Cont2Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:DocketFlowGpmGrossGenDept Jump to:Phone"

  8. Property:Incentive/ContPhone2 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:PrecourtOid Jump to:DocketFlowGpmGrossGenDeptContDivContPhone2 Jump

  9. Property:RAPID/Contact/ID2/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone Jump to: navigation, search

  10. Property:RAPID/Contact/ID3/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone Jump to:EmailID3/Organization

  11. Property:RAPID/Contact/ID6/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to: navigation,ID2/Phone JumppagesType

  12. Property:RAPID/Contact/ID9/Phone | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to:This property is set byis a subproperty of Phone

  13. Chip breaking system for automated machine tool

    DOE Patents [OSTI]

    Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

    1987-01-01T23:59:59.000Z

    The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

  14. 1-4244-1243-9/07/$25.00 2007 IEEE Mobile phone users in Kyrgyzstan

    E-Print Network [OSTI]

    Anderson, Richard

    1-4244-1243-9/07/$25.00 ©2007 IEEE Mobile phone users in Kyrgyzstan: A case study of identifying in Kyrgyzstan; (2) detect and communicate user requirements for that product concept to a design team; and (3 user needs and goals for mobile phone users in Kyrgyzstan. We believe the process by which we developed

  15. Graphics for the Masses: A Hardware Rasterization Architecture for Mobile Phones

    E-Print Network [OSTI]

    Graphics for the Masses: A Hardware Rasterization Architecture for Mobile Phones Tomas Akenine typically is one of the most energy-consuming operations, and because mobile phones need to use as little also the power consumption. CR Categories: I.3.1 [Computer Graphics]: Hardware Architecture--Graphics

  16. Office of Human Resources 907-450-8200 (phone) 907-450-8201 (fax)

    E-Print Network [OSTI]

    Pantaleone, Jim

    Office of Human Resources 907-450-8200 (phone) 907-450-8201 (fax) 212 Butrovich Building PO Box-6000147 Address: 910 Yukon Dr, Ste 212 or PO Box 755140 Fairbanks AK 99775-5140 Employer Phone Number: (907) 450 (907) 450-8200 UA Anchorage Human Resource Services (907) 786-4608 UA Fairbanks Human Resources (907

  17. An Efficient Energy Management System for Android Phone Using Bayesian Networks

    E-Print Network [OSTI]

    Cho, Sung-Bae

    An Efficient Energy Management System for Android Phone Using Bayesian Networks Young-Seol Lee, proximity, light and orientation sensors for context-awareness. Energy-efficient battery management systems, it becomes an issue to develop the techniques for efficient energy management on a mobile phone [2, 3, 4

  18. William Hoff Associate Professor Phone: 303-273-3761

    E-Print Network [OSTI]

    ://inside.mines.edu/~whoff/ RESEARCH INTERESTS Development of intelligent sensing systems within integrated man-machine or robotic, robotics, human- computer interfaces, virtual and augmented reality. EDUCATION B.S. Physics, Illinois on computer vision and image processing. Served as assistant director of the Engineering Division, 2006

  19. Deutsch's Universal Quantum Turing Machine (Revisited)

    E-Print Network [OSTI]

    Willem Fouché; Johannes Heidema; Glyn Jones; Petrus H. Potgieter

    2007-01-16T23:59:59.000Z

    Deutsch, Feynman, and Manin viewed quantum computing as a kind of universal physical simulation procedure. Much of the writing about quantum Turing machines has shown how these machines can simulate an arbitrary unitary transformation on a finite number of qubits. This interesting problem has been addressed most famously in a paper by Deutsch, and later by Bernstein and Vazirani. Quantum Turing machines form a class closely related to deterministic and probabilistic Turing machines and one might hope to find a universal machine in this class. A universal machine is the basis of a notion of programmability. The extent to which universality has in fact been established by the pioneers in the field is examined and a key notion in theoretical computer science (universality) is scrutinised. In a forthcoming paper, the authors will also consider universality in the quantum gate model.

  20. Instruction sets for Parallel Random Access Machines

    SciTech Connect (OSTI)

    Trahan, J.L.

    1988-01-01T23:59:59.000Z

    The computational powers of time-bounded Parallel Random Access Machines (PRAMs) with different instruction sets are compared. A basic PRAM can perform the following operations in unit-time: addition, subtraction, Boolean operations, comparisons, and indirect addressing. Multiple processors may concurrently read and concurrently write a single cell. This thesis establishes that the class of languages accepted in polynomial time on a PRAM(*, {up arrow}, {down arrow}) contains the class of languages accepted in exponential time on a nondeterministic Turing machine (NEXPTIME) and is contained in the class of languages accepted in exponential space on a Turing machine. Efficient simulations are presented of PRAMs with enhanced instruction sets by sequential RAMs with the same instruction sets; also simulations of probabilistic PRAMs by deterministic PRAMs, using parallelism to replace randomness. Also given are simulations of PRAM(op)s by PRAMs, where both the simulated machine and the simulating machine are exclusive-read, exclusive-write machines.

  1. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, J.R.; Reich, M.

    1996-11-12T23:59:59.000Z

    A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

  2. Hypervelocity cutting machine and method

    DOE Patents [OSTI]

    Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

    1996-11-12T23:59:59.000Z

    A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

  3. Green Machine | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG Contracting JumpGoveNebraska:EthanolHabits JumpMachine Jump to:

  4. Brilliant Machines | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced Materials FindAdvanced MaterialsDepartment FORBrilliant Machines

  5. Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade

    E-Print Network [OSTI]

    Zhu, Yufei

    2009-01-01T23:59:59.000Z

    In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

  6. 6.685 Electric Machines, Fall 2003

    E-Print Network [OSTI]

    Kirtley, James L.

    Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

  7. High pressure water jet mining machine

    DOE Patents [OSTI]

    Barker, Clark R. (Rolla, MO)

    1981-05-05T23:59:59.000Z

    A high pressure water jet mining machine for the longwall mining of coal is described. The machine is generally in the shape of a plowshare and is advanced in the direction in which the coal is cut. The machine has mounted thereon a plurality of nozzle modules each containing a high pressure water jet nozzle disposed to oscillate in a particular plane. The nozzle modules are oriented to cut in vertical and horizontal planes on the leading edge of the machine and the coal so cut is cleaved off by the wedge-shaped body.

  8. Logo Turtle Graphics for the Lisp Machine

    E-Print Network [OSTI]

    Lieberman, Henry

    1981-05-05T23:59:59.000Z

    This paper is a manual for an implementation of Logo graphics primitives in Lisp on the MIT Lisp Machine. The graphics system provides:

  9. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

    1994-01-01T23:59:59.000Z

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

  10. Micro-machined resonator oscillator

    DOE Patents [OSTI]

    Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

    1994-08-16T23:59:59.000Z

    A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

  11. Models of quantum turing machines.

    SciTech Connect (OSTI)

    Benioff, P.; Physics

    1998-01-01T23:59:59.000Z

    Quantum Turing machines are discussed and reviewed in this paper. Most of the paper is concerned with processes defined by a step operator T that is used to construct a Hamiltonian H according to Feynman's prescription. Differences between these models and the models of Deutsch are discussed and reviewed. It is emphasized that the models with H constructed from T include fully quantum mechanical processes that take computation basis states into linear superpositions of these states. The requirement that T be distinct path generating is reviewed. The advantage of this requirement is that Schr{umlt o}dinger evolution under H is one dimensional along distinct finite or infinite paths of nonoverlapping states in some basis B{sub C}. It is emphasized that B{sub C} can be arbitrarily complex with extreme entanglements between states of component systems. The new aspect of quantum Turing machines introduced here is the emphasis on the structure of graphs obtained when the states in the B{sub C} paths are expanded as linear superpositions of states in a reference basis such as the computation basis B{sub C}. Examples are discussed that illustrate the main points of the paper. For one example the graph structures of the paths in B{sub C} expanded as states in B{sub C} include finite stage binary trees and concatenated finite stage binary trees with or without terminal infinite binary trees. Other examples are discussed in which the graph structures correspond to interferometers and iterations of interferometers.

  12. Models of Quantum Turing machines

    E-Print Network [OSTI]

    Paul Benioff

    1997-08-28T23:59:59.000Z

    Quantum Turing machines are discussed and reviewed in this paper. Most of the paper is concerned with processes defined by a step operator $T$ that is used to construct a Hamiltonian $H$ according to Feynman's prescription. Differences between these models and the models of Deutsch are discussed and reviewed. It is emphasized that the models with $H$ constructed from $T$ include fully quantum mechanical processes that take computation basis states into linear superpositions of these states. The requirement that $T$ be distinct path generating is reviewed. The advantage of this requirement is that Schr\\"{o}dinger evolution under $H$ is one dimensional along distinct finite or infinite paths of nonoverlapping states in some basis $B_{T}$. It is emphasized that $B_{T}$ can be arbitrarily complex with extreme entanglements between states of component systems. The new aspect of quantum Turing machines introduced here is the emphasis on the structure of graphs obtained when the states in the $B_{T}$ paths are expanded as linear superpositions of states in a reference basis such as the computation basis $B_{C}$. Examples are discussed that illustrate the main points of the paper. For one example the graph structures of the paths in $B_{T}$ expanded as states in $B_{C}$ include finite stage binary trees and concatenated finite stage binary trees with or without terminal infinite binary trees. Other examples are discussed in which the graph structures correspond to interferometers and iterations of interferometers.

  13. Signal machines : localization of isolated accumulation Signal machines : localization of isolated

    E-Print Network [OSTI]

    Durand-Lose, Jérôme

    Signal machines : localization of isolated accumulation Signal machines : localization of isolated accumulation Jérôme Durand-Lose Laboratoire d'Informatique Fondamentale d'Orléans, Université d of isolated accumulation 1 Signal machines and isolated accumulations 2 Necessary conditions

  14. MACHINE LEARNING 1 Below are errata for the first and second printings of Machine Learning,

    E-Print Network [OSTI]

    Mitchell, Tom

    1 MACHINE LEARNING 1 Below are errata for the first and second printings of Machine Learning, Tom M Domingos, Olac Fuentes, Haym Hirsh, Ray Mooney, James Reggia, Roni Rosen­ feld, Stephen Scott, Nikunj Oza created for McGraw­Hill by Tom Mitchell JAN. 5, 1999 #12; 2 2 MACHINE LEARNING ... we expect h 0

  15. Support Vector Machines with Example Dependent Costs

    E-Print Network [OSTI]

    Brefeld, Ulf

    Support Vector Machines with Example Dependent Costs Ulf Brefeld, Peter Geibel, and Fritz Wysotzki neu- ral networks and machine learning, typically, do not take any costs into account or allow only costs depending on the classes of the examples that are used for learning. As an extension of class

  16. Machine Learning for Signature Verification Harish Srinivasan

    E-Print Network [OSTI]

    types of learning to be accomplished. In the first, the training set consists of genuines and forgeriesMachine Learning for Signature Verification Harish Srinivasan , Sargur N. Srihari and Matthew J it can be viewed as one that involves machine learning from a population of signatures. There are two

  17. Turing Impossibility Properties for Stack Machine Programming

    E-Print Network [OSTI]

    Bergstra, J A

    2012-01-01T23:59:59.000Z

    The strong, intermediate, and weak Turing impossibility properties are introduced. Some facts concerning Turing impossibility for stack machine programming are trivially adapted from previous work. Several intriguing questions are raised about the Turing impossibility properties concerning different method interfaces for stack machine programming.

  18. Quantum Cloning Machines and the Applications

    E-Print Network [OSTI]

    Heng Fan; Yi-Nan Wang; Li Jing; Jie-Dong Yue; Han-Duo Shi; Yong-Liang Zhang; Liang-Zhu Mu

    2014-08-02T23:59:59.000Z

    No-cloning theorem is fundamental for quantum mechanics and for quantum information science that states an unknown quantum state cannot be cloned perfectly. However, we can try to clone a quantum state approximately with the optimal fidelity, or instead, we can try to clone it perfectly with the largest probability. Thus various quantum cloning machines have been designed for different quantum information protocols. Specifically, quantum cloning machines can be designed to analyze the security of quantum key distribution protocols such as BB84 protocol, six-state protocol, B92 protocol and their generalizations. Some well-known quantum cloning machines include universal quantum cloning machine, phase-covariant cloning machine, the asymmetric quantum cloning machine and the probabilistic quantum cloning machine etc. In the past years, much progress has been made in studying quantum cloning machines and their applications and implementations, both theoretically and experimentally. In this review, we will give a complete description of those important developments about quantum cloning and some related topics. On the other hand, this review is self-consistent, and in particular, we try to present some detailed formulations so that further study can be taken based on those results.

  19. Machine characterization and benchmark performance prediction

    SciTech Connect (OSTI)

    Saavedra-Barrera, R.H.

    1988-12-01T23:59:59.000Z

    From runs of standard benchmarks or benchmark suites, it is not possible to characterize the machine nor to predict the run time of other benchmarks which have not been run. A new approach to benchmarking and machine characterization is reported. The creation and use of a machine analyzer is described, which measures the performance of a given machine on FORTRAN source language constructs. The machine analyzer yields a set of parameters which characterize the machine and spotlight its strong and weak points. Also described is a program analyzer, which analyzes FORTRAN programs and determines the frequency of execution of each of the same set of source language operations. It is then shown that by combining a machine characterization and a program characterization, we are able to predict with good accuracy the run time of a given benchmark on a given machine. Characterizations are provided for the Cray-X-MP/48, Cyber 205, IBM 3090/200, Amdahl 5840, Convex C-1, VAX 8600, VAX 11/785, VAX 11/780, SUN 3/50, and IBM RT-PC/125, and for the following benchmark programs or suites: Los Alamos (BMK8A1), Baskett, Linpack, Livermore Loops, Madelbrot Set, NAS Kernels, Shell Sort, Smith, Whetstone and Sieve of Erathostenes.

  20. Digital Apollo: Human and Machine in Spaceflight

    E-Print Network [OSTI]

    Digital Apollo: Human and Machine in Spaceflight David A. Mindell The MIT Press Cambridge of America. Library of Congress Cataloging-in-Publication Data Mindell, David A. Digital Apollo : human-0-262-13497-2 (hardcover : alk. paper) 1. Human-machine systems. 2. Project Apollo (U.S.)--History. 3. Astronautics

  1. Milling Machine Replacement Project (4587), 5/11/2012

    Broader source: Energy.gov (indexed) [DOE]

    by E-mail The proposed action is to replace two large milling machines with two new medium sized CNC milling machines. The new machines will be connected to the digital...

  2. Unified universal quantum cloning machine and fidelities

    SciTech Connect (OSTI)

    Wang Yinan; Shi Handuo; Xiong Zhaoxi; Jing Li; Mu Liangzhu [School of Physics, Peking University, Beijing 100871 (China); Ren Xijun [School of Physics and Electronics, Henan University, Kaifeng 4750011 (China); Fan Heng [Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China)

    2011-09-15T23:59:59.000Z

    We present a unified universal quantum cloning machine, which combines several different existing universal cloning machines together, including the asymmetric case. In this unified framework, the identical pure states are projected equally into each copy initially constituted by input and one half of the maximally entangled states. We show explicitly that the output states of those universal cloning machines are the same. One importance of this unified cloning machine is that the cloning procession is always the symmetric projection, which reduces dramatically the difficulties for implementation. Also, it is found that this unified cloning machine can be directly modified to the general asymmetric case. Besides the global fidelity and the single-copy fidelity, we also present all possible arbitrary-copy fidelities.

  3. The geography and carbon footprint of mobile phone use in Cote d'Ivoire

    E-Print Network [OSTI]

    Salnikov, Vsevolod; Youn, Hyejin; Lambiotte, Renaud; Gastner, Michael T

    2013-01-01T23:59:59.000Z

    The newly released Orange D4D mobile phone data base provides new insights into the use of mobile technology in a developing country. Here we perform a series of spatial data analyses that reveal important geographic aspects of mobile phone use in Cote d'Ivoire. We first map the locations of base stations with respect to the population distribution and the number and duration of calls at each base station. On this basis, we estimate the energy consumed by the mobile phone network. Finally, we perform an analysis of inter-city mobility, and identify high-traffic roads in the country.

  4. abrasive flow machining: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    informal concepts such as computable (total) functions beyond the limits of any given Turing machine or formal system, that is, these machines can, in a certain sense, "compute"...

  5. assembly charging machine: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    informal concepts such as computable (total) functions beyond the limits of any given Turing machine or formal system, that is, these machines can, in a certain sense, "compute"...

  6. abrasive waterjet machining: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    informal concepts such as computable (total) functions beyond the limits of any given Turing machine or formal system, that is, these machines can, in a certain sense, "compute"...

  7. In Silico Identification Software (ISIS): A Machine Learning...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Silico Identification Software (ISIS): A Machine Learning Approach to Tandem Mass Spectral Identification of Lipids. In Silico Identification Software (ISIS): A Machine Learning...

  8. Machine learning based prediction for peptide drift times in...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Machine learning based prediction for peptide drift times in ion mobility spectrometry . Machine learning based prediction for peptide drift times in ion mobility spectrometry ....

  9. Aggregation of induction machines for power system dynamic studies

    SciTech Connect (OSTI)

    Taleb, M.; Akbaba, M.; Abdullah, E.A. (Univ. of Bahrain, Isa Town (Bahrain). Electrical Engineering Dept.)

    1994-11-01T23:59:59.000Z

    This paper proposes a method for the aggregation of induction motor loads. Thevenin theorem along with some transient characteristics of induction machine are used in calculating the parameters of the equivalent machine. The dynamic response of the resultant machine differs from the sum of the dynamic responses of the individual machines. For a diversified group of induction machines, at least two separate aggregate machines are needed to represent the overall dynamic performance of the machines. To this end, a handy index for the classification (grouping) of machines is suggested. Comparison between the results obtained from the proposed method and corresponding ones obtained from some of the published methods is also presented.

  10. Advnaced Power Electronics and Electric Machines (APEEM) R&D...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle...

  11. applying machine learning: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    K. Saul 4 Applying Machine Learning to Cognitive Modeling for Cognitive Tutors Computer Technologies and Information Sciences Websites Summary: Applying Machine Learning to...

  12. U-239: Apple iPhone SMS Processing Flaw Lets Remote Users Spoof...

    Energy Savers [EERE]

    A vulnerability was reported in Apple iPhone. A remote user can send an SMS message with a specially crafted User Data Header (UDH) value that specifies an alternate...

  13. Evaluating the accuracy of data collection on mobile phones: A study of forms, SMS, and voice

    E-Print Network [OSTI]

    Patnaik, Somani

    While mobile phones have found broad application in reporting health, financial, and environmental data, there has been little study of the possible errors incurred during mobile data collection. This paper provides the ...

  14. Clean Cities Launches iPhone App for Alternative Fueling Station...

    Broader source: Energy.gov (indexed) [DOE]

    iPhone users now have access to a free app that locates fueling stations offering alternative fuels, including electricity, natural gas, biodiesel, E85, propane, and hydrogen. The...

  15. Christopher Bryant Williams; Email: cwilliams@gatech.edu; Phone: 404-964-1749 1 CURRICULUM VITAE

    E-Print Network [OSTI]

    Christopher Bryant Williams; Email: cwilliams@gatech.edu; Phone: 404-964-1749 1 CURRICULUM VITAE Name: Christopher Bryant Williams Office Address: Systems Realization Laboratory George W. Woodruff Engineering, Heat Transfer, Electronic Systems, #12;Christopher Bryant Williams; Email: cwilliams

  16. New Mexico State Cooperative Extension Service Phone 505/646-1131

    E-Print Network [OSTI]

    New Mexico State University Cooperative Extension Service Phone 505/646-1131 P.O. Box 30003 MSC 3AE that desired classroom pollution prevention programs. Support Staff Clay Sewell, Program Assistant, Water

  17. Anthem Cyber Attack: Information and Call-in Phone Number | Jefferson...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Anthem Cyber Attack: Information and Call-in Phone Number Colleagues, As you may have heard by now, Anthem was the latest victim of a cyber attack. Anthem reports that they were...

  18. Aligning product and supply chain strategies in the mobile phone industry

    E-Print Network [OSTI]

    Scanlon, Robert (Robert Curtis)

    2009-01-01T23:59:59.000Z

    Designing and managing the supply chain of a company in the mobile phone industry is particularly challenging. Short product lifecycles, rapidly evolving technology, globally linked distribution networks, increasing product ...

  19. India and China: A Comparative Analysis of Mobile Phones in Agriculture

    E-Print Network [OSTI]

    Bonthu, Prashanthi

    2014-05-31T23:59:59.000Z

    In 2010, China and India were named the first and second largest mobile phone markets in the world based on their number of subscribers. India and China have focused on extending their telecommunication services into rural areas for socio...

  20. Evolution of the mobile phone supply chain : the case of Ecuador

    E-Print Network [OSTI]

    Savannet, Santolina

    2010-01-01T23:59:59.000Z

    The cell phone industry is growing at a vertiginous pace. It has a life-changing impact on individuals and businesses in developing countries, where it can make up for the lack of infrastructure. In Latin America, the cell ...

  1. Evaluating Qualityy and CCompreehensioon of RReal-Timme Signn Languuage Video onn Mobilee Phones

    E-Print Network [OSTI]

    Wobbrock, Jacob O.

    Phones Jessicaa J. Tran1 , JJoy Kim2 , Jaaehong Chon1 , Evee A. Riskin11 , Richard EE. Ladner2 , Jacob that copies arre nnot made or distrributed for profit or commercial aadvantage and thaat ccopies bear

  2. Electric machine for hybrid motor vehicle

    DOE Patents [OSTI]

    Hsu, John Sheungchun (Oak Ridge, TN)

    2007-09-18T23:59:59.000Z

    A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

  3. Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers

    SciTech Connect (OSTI)

    Yamane, Luciana Harue, E-mail: lucianayamane@uol.com.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Tavares de Moraes, Viviane, E-mail: tavares.vivi@gmail.com [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Crocce Romano Espinosa, Denise, E-mail: espinosa@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Soares Tenorio, Jorge Alberto, E-mail: jtenorio@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil)

    2011-12-15T23:59:59.000Z

    Highlights: > This paper presents new and important data on characterization of wastes of electric and electronic equipments. > Copper concentration is increasing in mobile phones and remaining constant in personal computers. > Printed circuit boards from mobile phones and computers would not be mixed prior treatment. - Abstract: This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.

  4. Automated energy monitoring of machine tools

    E-Print Network [OSTI]

    Vijayaraghavan, Athulan; Dornfeld, David

    2010-01-01T23:59:59.000Z

    in context with the energy consumption data. 4.2. Reasoning:to decrease energy consumption, energy data has to be placedthe energy consumption and operational data of machine tools

  5. Growth machine theory: a qualitative analysis

    E-Print Network [OSTI]

    Smith, Gavin Paul

    1993-01-01T23:59:59.000Z

    of land inherent in growth machine theory, does not necessarily result in a dialectic, win-lose situation. Furthermore, it is argued that the growth coalition may not always ado t a unidimensional roach to development where further growth...

  6. Transition metal complex-based molecular machines 

    E-Print Network [OSTI]

    Sooksawat, Dhassida

    2015-06-30T23:59:59.000Z

    Inspired by the performance and evolutionarily-optimised natural molecular machines that carry out all the essential tasks contributing to the molecular basis of life, chemists aim towards fabricating synthetic molecular ...

  7. Passive machine augmented composite for multifunctional properties

    E-Print Network [OSTI]

    Kim, Jong Hyun

    2005-11-01T23:59:59.000Z

    This dissertation studies by experiment and numerical analysis an advanced composite material (Machine Augmented Composite or MAC) for enhancement of the passive damping while maintaining its stiffness. This MAC is composed of a pre-buckled wall...

  8. BE 780: Brain Machine Interfaces Spring 2013

    E-Print Network [OSTI]

    Vajda, Sandor

    BE 780: Brain Machine Interfaces Spring 2013 Instructor: Jason Ritt the readings for an assigned class. Homework 30% Mid-semester Report 30, code, or files of any kind. Reports and final projects must

  9. CollageMachine: Model of ``Interface Ecology''

    E-Print Network [OSTI]

    Mohri, Mehryar

    CollageMachine: Model of ``Interface Ecology'' By Andruid Kerne dissertation submitted partial addresses browsing creatively, been co­developed with the metadisciplinary framework interface ecology, in addition inside them, open process without definite bounds. a metadiscipline, interface ecology brings

  10. An Operating Environment for the Jellybean Machine

    E-Print Network [OSTI]

    Totty, Brian K.

    1988-05-01T23:59:59.000Z

    The Jellybean Machine is a scalable MIMD concurrent processor consisting of special purpose RISC processors loosely coupled into a low latency network. I have developed an operating system to provide the supportive ...

  11. 6.867 Machine Learning, Fall 2002

    E-Print Network [OSTI]

    Jaakkola, Tommi S. (Tommi Sakari)

    Principles, techniques, and algorithms in machine learning from the point of view of statistical inference; representation, generalization, and model selection; and methods such as linear/additive models, active learning, ...

  12. Method of fabricating a micro machine

    DOE Patents [OSTI]

    Stalford, Harold L

    2014-11-11T23:59:59.000Z

    A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

  13. Probabilistic Turing Machine and Landauer Limit

    E-Print Network [OSTI]

    Marco Frasca

    2012-06-04T23:59:59.000Z

    We show the equivalence between a probabilistic Turing machine and the time evolution of a one-dimensional Ising model, the Glauber model in one dimension, equilibrium positions representing the results of computations of the Turing machine. This equivalence permits to map a physical system on a computational system providing in this way an evaluation of the entropy at the end of computation. The result agrees with Landauer limit.

  14. Probabilistic Turing Machine and Landauer Limit

    E-Print Network [OSTI]

    Frasca, Marco

    2012-01-01T23:59:59.000Z

    We show the equivalence between a probabilistic Turing machine and the time evolution of a one-dimensional Ising model, the Glauber model in one dimension, equilibrium positions representing the results of computations of the Turing machine. This equivalence permits to map a physical system on a computational system providing in this way an evaluation of the entropy at the end of computation. The result agrees with Landauer limit.

  15. An operational semantics of a timely bounded agent abstract machine

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    An operational semantics of a timely bounded agent abstract machine Technical Report LIRMM #RR an agent abstract machine and its operational semantics. The dynamics of the agent abstract machine of the agent abstract machine using parallel evaluations. Simplicity and expressiveness are important features

  16. Survey of ceramic machining in Japan

    SciTech Connect (OSTI)

    Bandyopadhyay, B.P. [North Dakota Univ., Grand Forks, ND (United States). Dept. of Mechanical Engineering] [North Dakota Univ., Grand Forks, ND (United States). Dept. of Mechanical Engineering; Blau, P.J. [Oak Ridge National Lab., TN (United States)] [Oak Ridge National Lab., TN (United States)

    1993-07-01T23:59:59.000Z

    This report is a compilation of four subcontract reports provided by B. P. Bandyopadhyay who, while a visiting professor at Toyohashi University in Japan, conducted a survey of ceramic machining technology in that country from January 1 through December 31, 1992. Various aspects of machining technology were surveyed: types of parts being produced, types of ceramic materials being used, the nature of current ceramic machining research and development, and types of machine tools. The four separate reports compiled here were originally provided in a narrative, chronological form, and some of the information has been reorganized into topical areas for this compilation. This report is organized into three sections: The first describes ten ceramic machining research and development organizations and provides a reference list of their current technical publications; the second, two major trade shows; and the third, several other products and commercial developments noted during the course of Bandyopadhyay`s stay in Japan. An Appendix lists key individuals who are currently conducting ceramic machining research in Japan.

  17. Estimation of end of life mobile phones generation: The case study of the Czech Republic

    SciTech Connect (OSTI)

    Polak, Milos, E-mail: mpolak@remasystem.cz; Drapalova, Lenka

    2012-08-15T23:59:59.000Z

    Highlights: Black-Right-Pointing-Pointer In this paper, we define lifespan of mobile phones and estimate their average total lifespan. Black-Right-Pointing-Pointer The estimation of lifespan distribution is based on large sample of EoL mobile phones. Black-Right-Pointing-Pointer Total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. Black-Right-Pointing-Pointer In the years 2010-20, about 26.3 million pieces of EoL mobile phones will be generated in the Czech Republic. - Abstract: The volume of waste electrical and electronic equipment (WEEE) has been rapidly growing in recent years. In the European Union (EU), legislation promoting the collection and recycling of WEEE has been in force since the year 2003. Yet, both current and recently suggested collection targets for WEEE are completely ineffective when it comes to collection and recycling of small WEEE (s-WEEE), with mobile phones as a typical example. Mobile phones are the most sold EEE and at the same time one of appliances with the lowest collection rate. To improve this situation, it is necessary to assess the amount of generated end of life (EoL) mobile phones as precisely as possible. This paper presents a method of assessment of EoL mobile phones generation based on delay model. Within the scope of this paper, the method has been applied on the Czech Republic data. However, this method can be applied also to other EoL appliances in or outside the Czech Republic. Our results show that the average total lifespan of Czech mobile phones is surprisingly long, exactly 7.99 years. We impute long lifespan particularly to a storage time of EoL mobile phones at households, estimated to be 4.35 years. In the years 1990-2000, only 45 thousands of EoL mobile phones were generated in the Czech Republic, while in the years 2000-2010 the number grew to 6.5 million pieces and it is estimated that in the years 2010-2020 about 26.3 million pieces will be generated. Current European legislation sets targets on collection and recycling of WEEE in general, but no specific collection target for EoL mobile phone exists. In the year 2010 only about 3-6% of Czech EoL mobile phones were collected for recovery and recycling. If we make similar estimation using an estimated average EU value, then within the next 10 years about 1.3 billion of EoL mobile phones would be available for recycling in the EU. This amount contains about 31 tonnes of gold and 325 tonnes of silver. Since Europe is dependent on import of many raw materials, efficient recycling of EoL products could help reduce this dependence. To set a working system of collection, it will be necessary to set new and realistic collection targets.

  18. T-670: Skype Input Validation Flaw in 'mobile phone' Profile Entry Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    The software does not properly filter HTML code from user-supplied input in the The "mobile phone" profile entry before displaying the input.

  19. Modeling induction machine winding faults for diagnosis In Electrical Machines Diagnosis

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Chapter 2 Modeling induction machine winding faults for diagnosis In Electrical Machines Diagnosis of a winding fault situation, then the time available to the experimenter may vary from a few minutes to a few will see that the controls are perfectly free from imbalances induced by a stator insulation fault, whether

  20. Energy efficient wireless unicast routing alternatives for machine-to-machine networks

    E-Print Network [OSTI]

    Uysal-Biyikoglu, Elif

    Review Energy efficient wireless unicast routing alternatives for machine-to-machine networks Neyre into shortest-path based energy-efficient routing alternatives to provide a reference for system designers. Next, a detailed account of energy-efficient unicast routing alternatives, with a particular focus

  1. A First Look at Cellular Machine-to-Machine Traffic Large Scale Measurement and Characterization

    E-Print Network [OSTI]

    Greenberg, Albert

    ABSTRACT Cellular network based Machine-to-Machine (M2M) commu- nication is fast becoming a market-changing force for a wide spectrum of businesses and applications such as telematics, smart metering, point-of-sale terminals, and home security and automation systems. In this paper, we aim to answer the following important

  2. A Machine-to-Machine Architecture to Merge Semantic Sensor Measurements

    E-Print Network [OSTI]

    Gesbert, David

    network Smart home & smart kitchen M2M area network M2M application: Suggest a recipe according the mood. PROBLEM Machine-to-Machine (M2M) applications are more and more popular due to the availability of smart M2M devices (sensors). M2M devices are used in a great deal of realms such as home monitoring [19

  3. Template-directed biopolymerization: tape-copying Turing machines

    E-Print Network [OSTI]

    Sharma, Ajeet K; 10.1142/S1793048012300083

    2013-01-01T23:59:59.000Z

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  4. Automatic feed system for ultrasonic machining

    DOE Patents [OSTI]

    Calkins, Noel C. (Los Alamos, NM)

    1994-01-01T23:59:59.000Z

    Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.

  5. Micro-machined thermo-conductivity detector

    DOE Patents [OSTI]

    Yu, Conrad (Antioch, CA)

    2003-01-01T23:59:59.000Z

    A micro-machined thermal conductivity detector for a portable gas chromatograph. The detector is highly sensitive and has fast response time to enable detection of the small size gas samples in a portable gas chromatograph which are in the order of nanoliters. The high sensitivity and fast response time are achieved through micro-machined devices composed of a nickel wire, for example, on a silicon nitride window formed in a silicon member and about a millimeter square in size. In addition to operating as a thermal conductivity detector, the silicon nitride window with a micro-machined wire therein of the device can be utilized for a fast response heater for PCR applications.

  6. Hypercomputation: computing more than the Turing machine

    E-Print Network [OSTI]

    Toby Ord

    2002-09-25T23:59:59.000Z

    Due to common misconceptions about the Church-Turing thesis, it has been widely assumed that the Turing machine provides an upper bound on what is computable. This is not so. The new field of hypercomputation studies models of computation that can compute more than the Turing machine and addresses their implications. In this report, I survey much of the work that has been done on hypercomputation, explaining how such non-classical models fit into the classical theory of computation and comparing their relative powers. I also examine the physical requirements for such machines to be constructible and the kinds of hypercomputation that may be possible within the universe. Finally, I show how the possibility of hypercomputation weakens the impact of Godel's Incompleteness Theorem and Chaitin's discovery of 'randomness' within arithmetic.

  7. Superplasticity dome forming of machined sheets

    SciTech Connect (OSTI)

    Akkus, Nihat; Usugi, Toshihiro; Kawahara, Masanori; Manabe, Kenichi; Nishimura, Hisashi

    2000-07-01T23:59:59.000Z

    An experimental work on the superplastic bulge forming of machined sheets is presented in this study. Unlike the previously employed incremental-iterative method, a reverse deformation model was used to estimate the initial thickness distribution of the machined sheets from which a constant final thickness can be obtained when the shape of the bulged sheet is hemisphere. The reverse deformation model was obtained by modifying previously-known models, which were based on the axisymmetric membrane and the incremental strain theory. Bulge forming experiments were conducted on machined sheets of Al alloy, A5083, at about 530 C under constant pressure control mode. The result of this simulation to estimate the final constant thickness distribution agreed well with the experiment, and confirmed that the reverse deformation model can be successfully applied in optimizing the thickness distribution of the starting sheets in order to obtain the desired final thickness distribution of the free bulged hemispherical product.

  8. Multi-winding homopolar electric machine

    DOE Patents [OSTI]

    Van Neste, Charles W

    2012-10-16T23:59:59.000Z

    A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

  9. Electric machine and current source inverter drive system

    DOE Patents [OSTI]

    Hsu, John S

    2014-06-24T23:59:59.000Z

    A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

  10. Diagnostics for machine protection of DEMO

    SciTech Connect (OSTI)

    Felton, R. [EURATOM/CCFE Fusion Association, Culham Centre for Fusion Energy, Culham Science Centre, Oxfordshire, OX14 3DB (United Kingdom)

    2014-08-21T23:59:59.000Z

    DEMO aims to (i) integrate, demonstrate and validate all relevant technology necessary to convert fusion energy to electrical energy and (ii) that the machine and its operations are economically and environmentally acceptable. To maintain the efficiency and availability of the machine, there are several physics and combined physics/technology issues as well as the engineering issues. Machine Protection (also known as Protection of Investment) addresses both the risks to plant (to avoid costly repair or replacement) and the risks to normal operating time (to avoid loss of productivity and the return on investment). The plasma-related Machine Protection issues involve measurement and control of plasma stability, plasma purity, and plasma-wall interactions. Machine Protection aims to avoid hitting catastrophic limits by using early warning alarm systems, and controlled termination or avoidance, involving coordinated actions of the magnets, gas and auxiliary heating or current-drive systems. This article outlines the key processes, some of which are used in present-day tokamaks and some of which are new specifically for DEMO (e.g. First wall and divertor power handling) and reveals the need to research and develop new science and technology for Machine Protections in DEMO's high radiation and thermal fields. This work was funded by the RCUK Energy Programme under grant EP/I501045 and the European Communities under the contract of Association between EURATOM and CCFE and conducted partly under EFDA PPPT (WP13-DAS04). The views and opinions expressed herein do not necessarily reflect those of the European Commission.

  11. Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  12. 20140430_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  13. 20130416_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  14. Green Machine Florida Canyon Hourly Data 20130731

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  15. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, J.M.

    1984-01-01T23:59:59.000Z

    The present invention is directed to a method for machine optical quality finishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  16. Method for machining steel with diamond tools

    DOE Patents [OSTI]

    Casstevens, John M. (Greenville, TX)

    1986-01-01T23:59:59.000Z

    The present invention is directed to a method for machining optical quality inishes and contour accuracies of workpieces of carbon-containing metals such as steel with diamond tooling. The wear rate of the diamond tooling is significantly reduced by saturating the atmosphere at the interface of the workpiece and the diamond tool with a gaseous hydrocarbon during the machining operation. The presence of the gaseous hydrocarbon effectively eliminates the deterioration of the diamond tool by inhibiting or preventing the conversion of the diamond carbon to graphite carbon at the point of contact between the cutting tool and the workpiece.

  17. 20140430_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-05-05T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

  18. Green Machine Florida Canyon Hourly Data 20130731

    SciTech Connect (OSTI)

    Vanderhoff, Alex

    2013-08-30T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

  19. 20130416_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Vanderhoff, Alex

    2013-04-24T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

  20. Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Vanderhoff, Alex

    2013-07-15T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

  1. Quantum thermal machines with single nonequilibrium environments

    E-Print Network [OSTI]

    Bruno Leggio; Bruno Bellomo; Mauro Antezza

    2015-01-08T23:59:59.000Z

    We propose a scheme for a quantum thermal machine made by atoms interacting with a single non-equilibrium electromagnetic field. The field is produced by a simple configuration of macroscopic objects held at thermal equilibrium at different temperatures. We show that these machines can deliver all thermodynamic tasks (cooling, heating and population inversion), and this by establishing quantum coherence with the body on which they act. Remarkably, this system allows to reach efficiencies at maximum power very close to the Carnot limit, much more than in existing models. Our findings offer a new paradigm for efficient quantum energy flux management, and can be relevant for both experimental and technological purposes.

  2. Methods and apparatus for controlling rotary machines

    DOE Patents [OSTI]

    Bagepalli, Bharat Sampathkumaran (Niskayuna, NY); Jansen, Patrick Lee (Scotia, NY); Barnes, Gary R. (Delanson, NY); Fric, Thomas Frank (Greer, SC); Lyons, James Patrick Francis (Niskayuna, NY); Pierce, Kirk Gee (Simpsonville, SC); Holley, William Edwin (Greer, SC); Barbu, Corneliu (Guilderland, NY)

    2009-09-01T23:59:59.000Z

    A control system for a rotary machine is provided. The rotary machine has at least one rotating member and at least one substantially stationary member positioned such that a clearance gap is defined between a portion of the rotating member and a portion of the substantially stationary member. The control system includes at least one clearance gap dimension measurement apparatus and at least one clearance gap adjustment assembly. The adjustment assembly is coupled in electronic data communication with the measurement apparatus. The control system is configured to process a clearance gap dimension signal and modulate the clearance gap dimension.

  3. High slot utilization systems for electric machines

    DOE Patents [OSTI]

    Hsu, John S (Oak Ridge, TN)

    2009-06-23T23:59:59.000Z

    Two new High Slot Utilization (HSU) Systems for electric machines enable the use of form wound coils that have the highest fill factor and the best use of magnetic materials. The epoxy/resin/curing treatment ensures the mechanical strength of the assembly of teeth, core, and coils. In addition, the first HSU system allows the coil layers to be moved inside the slots for the assembly purpose. The second system uses the slided-in teeth instead of the plugged-in teeth. The power density of the electric machine that uses either system can reach its highest limit.

  4. Apparatus for cooling an electric machine

    DOE Patents [OSTI]

    Palafox, Pepe; Gerstler, William Dwight; Shen, Xiaochun; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Salasoo, Lembit

    2013-07-16T23:59:59.000Z

    Provided is an apparatus, for example, for use with a rotating electric machine, that includes a housing. The housing can include a housing main portion and a housing end portion. The housing main portion can be configured to be disposed proximal to a body portion of a stator section of an electric machine. The housing main portion can define a main fluid channel that is configured to conduct fluid therethrough. The housing end portion can receive fluid from said main fluid channel and direct fluid into contact with a winding end portion of a conductive winding of the stator section.

  5. Evaluating socio-economic state of a country analyzing airtime credit and mobile phone datasets

    E-Print Network [OSTI]

    Gutierrez, Thoralf; Blondel, Vincent D

    2013-01-01T23:59:59.000Z

    Reliable statistical information is important to make political decisions on a sound basis and to help measure the impact of policies. Unfortunately, statistics offices in developing countries have scarce resources and statistical censuses are therefore conducted sporadically. Based on mobile phone communications and history of airtime credit purchases, we estimate the relative income of individuals, the diversity and inequality of income, and an indicator for socioeconomic segregation for fine-grained regions of an African country. Our study shows how to use mobile phone datasets as a starting point to understand the socio-economic state of a country, which can be especially useful in countries with few resources to conduct large surveys.

  6. Sleep Apnea Monitoring Using Mobile Phones Shamma Alqassim, Madhumeta Ganesh, Shaheen Khoja, Meher Zaidi, Fadi Aloul, Assim Sagahyroon

    E-Print Network [OSTI]

    Aloul, Fadi

    and detect symptoms of sleep apnea using the smart phone's built-in sensors. The purpose of the application-in features and sensors of the phone. However, although helpful, many of these systems do not provide users is estimated to affect 1 in 4 men and 1 in 9 women; it also affects 23 million working adults [5

  7. A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San Francisco State University

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    technology with a fast diffusion rate (Kim, 2005). Mobile phones have brought about improvements and Ratten, 2007), and mobile customer relationship management (Moedritscher and Mussnig, 2005), offering1 A Model of Attitudes toward the Acceptance of Mobile Phone Use in Public Places Brenda Mak, San

  8. The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1-609-516-7669

    E-Print Network [OSTI]

    Delgado, Mauricio

    The National Alliance of Clean Energy Incubators jgroelinger@cleanenergyalliance.com Phone: +1, Executive Director (phone): 1-609-516-7669; (e-mail): jgroelinger@cleanenergyalliance.com CLEAN ENERGY ALLIANCE AND U.S. DEPARTMENT OF ENERGY LAUNCH PARTNERSHIP TO SUPPORT COMMERCIALIZATION OF CLEAN ENERGY

  9. Construction and Analysis of Educational Tests Using Abductive Machine Learning

    E-Print Network [OSTI]

    Abdel-Aal, Radwan E.

    Construction and Analysis of Educational Tests Using Abductive Machine Learning El-Sayed M. El a novel approach that uses abductive network modeling to automatically identify the most accuracy. Abductive machine learning automatically selects only effective model inputs and builds

  10. advanced induction machine: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Adjustable speed generationDynamic Phasor Modeling of the Doubly-Fed Induction Machine in Generator Operation Emmanuel 617 373 8970 Abstract-- The doubly-fed induction machine used...

  11. Y-12 sets the pace in precision machining - Or: Establishing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    machining (title used by The Oak Ridger) Beginning in the very early years of Y-12's history, precision machining has played a strong and leader- ship role in the mission...

  12. Technical Documentation for System Center 2012 Virtual Machine

    E-Print Network [OSTI]

    Hunt, Galen

    #12; Technical Documentation for System Center 2012 ­ Virtual Machine Manager VMM Information Experience Team Summary: Virtual Machine Manager (VMM) is a management solution for the virtualized datacenter, enabling you to configure and manage your virtualization host, networking, and storage

  13. Models and evaluation of human-machine systems

    E-Print Network [OSTI]

    Bayout Alvarenga, Marco Antonio

    1993-01-01T23:59:59.000Z

    The field of human-machine systems and human-machine interfaces is very multidisciplinary. We have to navigate between the knowledge waves brought by several areas of the human learning: cognitive psychology, artificial ...

  14. Optics, illumination, and image sensing for machine vision II

    SciTech Connect (OSTI)

    Svetkoff, D.J.

    1987-01-01T23:59:59.000Z

    These proceedings collect papers on the general subject of machine vision. Topics include illumination and viewing systems, x-ray imaging, automatic SMT inspection with x-ray vision, and 3-D sensing for machine vision.

  15. Optimal Universal Disentangling Machine for Two Qubit Quantum States

    E-Print Network [OSTI]

    Sibasish Ghosh; Somshubhro Bandyopadhyay; Anirban Roy; Debasis Sarkar; Guruprasad Kar

    1999-10-14T23:59:59.000Z

    We derive the optimal curve satisfied by the reduction factors, in the case of universal disentangling machine which uses only local operations. Impossibility of constructing a better disentangling machine, by using non-local operations, is discussed.

  16. Machinability of a Stainless Steel by Electrochemical Discharge Microdrilling

    SciTech Connect (OSTI)

    Coteata, Margareta; Pop, Nicolae; Slatineanu, Laurentiu ['Gheorghe Asachi' Technical University of Iasi, Department of Machine Manufacturing Technology, Blvd. D Mangeron 59A, 700050 Iasi (Romania); Schulze, Hans-Peter [Otto-von-Guericke-University Magdeburg, Institute of Fundamental Electrical Engineering and EMC Universitaetsplatz 2, D-39106 Magdeburg (Germany); Besliu, Irina [University 'Stefan cel Mare' of Suceava, Department of Technologies and Management, Str. Universitatii, 13, 720 229 Suceava (Romania)

    2011-05-04T23:59:59.000Z

    Due to the chemical elements included in their structure for ensuring an increased resistance to the environment action, the stainless steels are characterized by a low machinability when classical machining methods are applied. For this reason, sometimes non-traditional machining methods are applied, one of these being the electrochemical discharge machining. To obtain microholes and to evaluate the machinability by electrochemical discharge microdrilling, test pieces of stainless steel were used for experimental research. The electrolyte was an aqueous solution of sodium silicate with different densities. A complete factorial plan was designed to highlight the influence of some input variables on the sizes of the considered machinability indexes (electrode tool wear, material removal rate, depth of the machined hole). By mathematically processing of experimental data, empirical functions were established both for stainless steel and carbon steel. Graphical representations were used to obtain more suggestive vision concerning the influence exerted by the considered input variables on the size of the machinability indexes.

  17. Machine Learning Applied in 2D Parasitic Extraction

    E-Print Network [OSTI]

    Li, Zhixing

    2014-12-15T23:59:59.000Z

    geometry to predict the parasitic capacitance based on machine learning. A simplification algorithm is proposed to reduce the number of conductors for quicker and easier regression modeling and the regression models can improve by machine learning technique...

  18. university-logo Introduction to Statistical Machine Translation

    E-Print Network [OSTI]

    Goldschmidt, Christina

    university-logo . . . . . . Introduction to Statistical Machine Translation Phil Blunsom phil Week 6 1 / 47 #12;university-logo . . . . . . Outline . ..1 Introduction . ..2 Parallel corpora . ..3) Statistical Machine Translation Michaelmas Week 6 2 / 47 #12;university-logo . . . . . . Outline . ..1

  19. An algebraic approach to machine learning and

    E-Print Network [OSTI]

    Markov, Zdravko

    rain mild high weak yes 5 rain cool normal weak yes 6 rain cool normal strong no 7 overcast cool normal strong yes 8 sunny mild high weak no 9 sunny cool normal weak yes 10 rain mild normal weak yes 11 sunny Machine Learning, c Tom M. Mitchell, McGraw Hill, 1997 3 #12;Conceptual Clustering No. covering milk

  20. Machine Learning Techniques for Passive Network Inventory

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Machine Learning Techniques for Passive Network Inventory J´er^ome Franc¸ois, Humberto Abdelnur identify running code, is a powerful service for both security assessment and inventory management operator. Index Terms--fingerprinting, inventory management, syntactic tree, SVM. I. INTRODUCTION ASSUMING

  1. LMH Laboratory for Hydraulic Machines Supervisor

    E-Print Network [OSTI]

    Diggavi, Suhas

    rotating (runner-impeller) and stationary (guide vane and stay vane) blades in pump-turbine hydraulicLMH Laboratory for Hydraulic Machines Supervisor: Dr. Mohamed Farhat (LMH) Doctoral Assistants hydraulic lift surface in pump mode and detail the flow behaviour under these conditions. This is a first

  2. Tony Jebara, Columbia University Advanced Machine

    E-Print Network [OSTI]

    Jebara, Tony

    Tony Jebara, Columbia University Advanced Machine Learning & Perception Instructor: Tony Jebara #12;Tony Jebara, Columbia University Topic 1 ·Introduction, researchy course, latest papers ·Going beyond and shortcomings it entails #12;Tony Jebara, Columbia University About me ·Tony Jebara, Associate Professor

  3. Tony Jebara, Columbia University Advanced Machine

    E-Print Network [OSTI]

    Jebara, Tony

    Tony Jebara, Columbia University Advanced Machine Learning & Perception Instructor: Tony Jebara #12;Tony Jebara, Columbia University Topic 2 ·Nonlinear Manifold Learning ·Multidimensional Scaling (MDS) ·Semidefinite Embedding (SDE) ·Minimum Volume Embedding (MVE) #12;Tony Jebara, Columbia University Principal

  4. Tony Jebara, Columbia University Advanced Machine

    E-Print Network [OSTI]

    Jebara, Tony

    Tony Jebara, Columbia University Advanced Machine Learning & Perception Instructor: Tony Jebara #12;Tony Jebara, Columbia University Topic 9 Semi-Supervised Learning Felix X. Yu · Semi-supervised SVM (S3, Columbia University How ·Transduction: discriminative, find large margin region. ·Hidden Labels: use

  5. Tony Jebara, Columbia University Advanced Machine

    E-Print Network [OSTI]

    Jebara, Tony

    Tony Jebara, Columbia University Advanced Machine Learning & Perception Instructor: Tony Jebara #12;Tony Jebara, Columbia University Boosting ·Combining Multiple Classifiers ·Voting ·Boosting ·Adaboost ·Based on material by Y. Freund, P. Long & R. Schapire #12;Tony Jebara, Columbia University Combining

  6. Tony Jebara, Columbia University Advanced Machine

    E-Print Network [OSTI]

    Jebara, Tony

    Tony Jebara, Columbia University Advanced Machine Learning & Perception Instructor: Tony Jebara #12;Tony Jebara, Columbia University Topic 3 ·Maximum Margin ·Empirical Risk Minimization ·VC Dimension, Columbia University Generative vs. Discriminative ·Generative approach to classification: get p(x,y) then p

  7. Small universal Turing machines Turlough Neary

    E-Print Network [OSTI]

    Neary, Turlough

    Kudlek, Matthew Cook, Liesbeth De Mol, Fred Lunnon, Ronan Reilly, James Power, and Tom Naughton. I would Woods and Dr. J. Paul Gibson External Examiner: Prof. Maurice Margenstern Internal Examiner: Dr. James machines. We show that the problem of predicting t steps of the 1D cellular automa- ton Rule 110 is P

  8. The ATLAS Higgs Machine Learning Challenge

    E-Print Network [OSTI]

    Cowan, Glen; The ATLAS collaboration; Bourdarios, Claire

    2015-01-01T23:59:59.000Z

    High Energy Physics has been using Machine Learning techniques (commonly known as Multivariate Analysis) since the 1990s with Artificial Neural Net and more recently with Boosted Decision Trees, Random Forest etc. Meanwhile, Machine Learning has become a full blown field of computer science. With the emergence of Big Data, data scientists are developing new Machine Learning algorithms to extract meaning from large heterogeneous data. HEP has exciting and difficult problems like the extraction of the Higgs boson signal, and at the same time data scientists have advanced algorithms: the goal of the HiggsML project was to bring the two together by a “challenge”: participants from all over the world and any scientific background could compete online to obtain the best Higgs to tau tau signal significance on a set of ATLAS fully simulated Monte Carlo signal and background. Instead of HEP physicists browsing through machine learning papers and trying to infer which new algorithms might be useful for HEP, then c...

  9. Turing machines based on unsharp quantum logic

    E-Print Network [OSTI]

    Yun Shang; Xian Lu; Ruqian Lu

    2012-10-02T23:59:59.000Z

    In this paper, we consider Turing machines based on unsharp quantum logic. For a lattice-ordered quantum multiple-valued (MV) algebra E, we introduce E-valued non-deterministic Turing machines (ENTMs) and E-valued deterministic Turing machines (EDTMs). We discuss different E-valued recursively enumerable languages from width-first and depth-first recognition. We find that width-first recognition is equal to or less than depth-first recognition in general. The equivalence requires an underlying E value lattice to degenerate into an MV algebra. We also study variants of ENTMs. ENTMs with a classical initial state and ENTMs with a classical final state have the same power as ENTMs with quantum initial and final states. In particular, the latter can be simulated by ENTMs with classical transitions under a certain condition. Using these findings, we prove that ENTMs are not equivalent to EDTMs and that ENTMs are more powerful than EDTMs. This is a notable difference from the classical Turing machines.

  10. Designing Fusion Machines for High Availability

    E-Print Network [OSTI]

    Designing Fusion Machines for High Availability Tom Brown, Hutch Neilson Princeton Plasma Physics is proportional to (Availability)-1 Rapid removal/replacement of limited-life in-vessel components is a necessary condition for high availability. DEMO will need to show that a fusion plant can operate with high

  11. HEART SMART NUTRITION Be a Lean Machine

    E-Print Network [OSTI]

    Lesson 6 HEART SMART NUTRITION Be a Lean Machine This Heart Smart Nutrition series can help you Heart, Lung and Blood Institute). Physical activity increases your metabolic rate, which helps to burn more calories. Plus it helps the heart and lungs function to full capacity. Exercise also helps raise

  12. Gravitational dispersion in a torsional wave machine

    E-Print Network [OSTI]

    Rafael de la Madrid; Alejandro Gonzalez; George Irwin

    2014-09-01T23:59:59.000Z

    We demonstrate that mechanical waves traveling in a torsional, mechanical wave machine exhibit dispersion due to gravity and the discreteness of the medium. We also show that although the dispersion due to discreteness is negligible, the dispersion due to gravity can be easily measured, and can be shown to disappear in a zero-gravity environment.

  13. Factored Language Models for Statistical Machine Translation

    E-Print Network [OSTI]

    Koehn, Philipp

    Factored Language Models for Statistical Machine Translation Amittai E. Axelrod TH E U N I V E R . . . . . . . . . . . . . . . . . . . . . 10 2.4.3 Log-Linear, Phrase-Based Translation Models . . . . . . . . . 11 3 Statistical Language S ITY OF E D I N B U R G H Master of Science by Research Institute for Communicating and Collaborative

  14. CSP Theorems for Communicating B Machines

    E-Print Network [OSTI]

    Doran, Simon J.

    CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

  15. A novel capillary polymerase chain reaction machine

    E-Print Network [OSTI]

    Chiou, Jeffrey Tsungshuan

    2001-01-01T23:59:59.000Z

    I built a novel prototype capillary polymerase chain reaction machine. The purpose was to perform a single reaction as fast as possible with a reaction volume - 100 nl. The PCR mix is in the form of a 1 /1 droplet that ...

  16. Design of a desktop milling machine for fabrication in an introductory machine shop class

    E-Print Network [OSTI]

    Lorenc, Dan (Daniel P.)

    2010-01-01T23:59:59.000Z

    The purpose of this research is to design, fabricate and test the electromechanical subsystem of a CNC milling machine kit. Unlike all other CNC kits on the market, the purpose of this kit is to teach students the principles ...

  17. The New Jersey Voting-machine Lawsuit and the AVC Advantage DRE Voting Machine

    E-Print Network [OSTI]

    Tan, Gang

    machine, which is used throughout New Jersey (and Louisiana), and the Court has permitted us to publicly-04, Superior Court of New Jersey. In the "Super Tuesday" Presidential Primary of February 5, 2008, at least 37

  18. On the Translation of Procedures to Finite Machines

    E-Print Network [OSTI]

    Müller-Olm, Markus

    On the Translation of Procedures to Finite Machines Abstraction Allows a Clean Proof Markus M¨uller-Olm

  19. On the Translation of Procedures to Finite Machines

    E-Print Network [OSTI]

    Müller-Olm, Markus

    On the Translation of Procedures to Finite Machines Abstraction Allows a Clean Proof Markus MË?uller­Olm

  20. Covered Product Category: Water-Cooled Ice Machines

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and federal efficiency requirements for water-cooled ice machines.

  1. A Turing Machine Resisting Isolated Bursts Of Faults

    E-Print Network [OSTI]

    Capuni, Ilir

    2012-01-01T23:59:59.000Z

    We consider computations of a Turing machine under noise that causes consecutive violations of the machine's transition function. Given a constant upper bound B on the size of bursts of faults, we construct a Turing machine M(B) subject to faults that can simulate any fault-free machine under the condition that bursts are not closer to each other than V for an appropriate V = O(B^2).

  2. Micro-windmills to Power up Your Phone and Posted by By Patty at 25 January, at 17 : 49 PM Print

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    will be used to charge cell phone batteries. The micro windmills generates electric power from ambient wind to recharge a dead phone in just a few minutes. The device's parts are as tiny as a fraction of the diameter.com/micro-windmills-to-power-up-your-phone-and-more #12;Photo by http://blog.zeit.de The micro

  3. Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277-3112 Fax: 505 277-6927 http://www.cs.unm.edu/~hollan

    E-Print Network [OSTI]

    Mills, Kevin

    UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone;UNM NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 NYU Computer Science Department, University of New Mexico Albuquerque, New Mexico 87131 Phone: 505 277

  4. Artificial Life: The Utrecht Machine W. Garrett Mitchener

    E-Print Network [OSTI]

    Mitchener, W. Garrett

    Artificial Life: The Utrecht Machine W. Garrett Mitchener College of Charleston October 10, 2013 W. Garrett Mitchener (C of C) Utrecht Machine October 10, 2013 1 / 17 #12;Introduction Artificial life is hard W. Garrett Mitchener (C of C) Utrecht Machine October 10, 2013 2 / 17 #12;Introduction Let's start

  5. Human versus Machine in the Topic Distillation Task Mingfang Wu

    E-Print Network [OSTI]

    Wu, Mingfang

    Human versus Machine in the Topic Distillation Task Mingfang Wu 1 , Gheorghe Muresan2 , Alistair Mc. The focus is on comparing humans and machine algorithms in terms of performance in a topic distillation task demonstrated that machines can perform nearly as well as people on the topic distillation task. Given a system

  6. Dynamic Simulation of Electric Machines on FPGA Boards

    E-Print Network [OSTI]

    Zambreno, Joseph A.

    Dynamic Simulation of Electric Machines on FPGA Boards Hao Chen, Song Sun, Dionysios C. Aliprantis USA Abstract--This paper presents the implementation of an induc- tion machine dynamic simulation] devices. Herein, the goal is to implement an entire dynamic simulation of an induction machine on a single

  7. Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT

    E-Print Network [OSTI]

    Farritor, Shane

    Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES://ehs.unl.edu/) Introduction This SOP is intended to work in tandem with other EHS SOPs related to Lockout/Tagout (LO/TO): · Lockout/Tagout for Machines & Equipment: Program Overview · Lockout/Tagout for Machines & Equipment

  8. Machine Learning for Robots: A Comparison of Di erent Paradigms

    E-Print Network [OSTI]

    Duckett, Tom

    programming the robot to operate the machine. Machine learning research has studied many di erent types of learning 22]. Generally speaking, there are two types of learning: supervised and unsupervisedMachine Learning for Robots: A Comparison of Di erent Paradigms Sridhar Mahadevan Department

  9. Quantum Turing Machines: Local Transition, Preparation, Measurement, and Halting

    E-Print Network [OSTI]

    Masanao Ozawa

    1998-09-14T23:59:59.000Z

    Foundations of the theory of quantum Turing machines are investigated. The protocol for the preparation and the measurement of quantum Turing machines is discussed. The local transition functions are characterized for fully general quantum Turing machines. A new halting protocol is proposed without augmenting the halting qubit and is shown to work without spoiling the computation.

  10. Control Strategies for Machining with Industrial Olof Sornmo

    E-Print Network [OSTI]

    Control Strategies for Machining with Industrial Robots Olof S¨ornmo Department of Automatic #12;Abstract This thesis presents methods for improving machining with industrial robots using control during high-speed machining operations, combined with the limited stiffness of industrial robots, have

  11. A MACHINE LEARNING APPROACH TO BIOCHEMICAL REACTION RULES DISCOVERY

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    perspective and from the Systems Biology perspective. In this paper, we report on the machine learning systemA MACHINE LEARNING APPROACH TO BIOCHEMICAL REACTION RULES DISCOVERY Laurence Calzone, Nathalie to the design of new automated reasoning tools for biologists/modelers. The Biochemical Abstract machine BIOCHAM

  12. Techniac and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Techniac and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 3 and Cost Assessment of the PCAST Machine - Final Report - Volume II Chapter 3.0 - Engineering Chapter 4 175 183 z 207 z #12;#12;Chapter 3 Engineering Design of the PCAST Machine Introduction (J. Schmidt, J

  13. iPoint: A Platform-independent Passive Information Kiosk for Cell Phones

    E-Print Network [OSTI]

    Noubir, Guevara

    communication paradigms and build a prototype of such a system that we call iPoint. In the process of designingiPoint: A Platform-independent Passive Information Kiosk for Cell Phones Hooman Javaheri College@ccs.neu.edu Abstract--We introduce iPoint, a passive device that can interact and deliver information to virtually any

  14. Victoria E. Howle Department of Mathematics & Statistics Phone: (806) 742-2580 ext. 264

    E-Print Network [OSTI]

    Howle, Victoria E.

    Victoria E. Howle Department of Mathematics & Statistics Phone: (806) 742-2580 ext. 264 Texas Tech University Fax: (806) 742-1112 MS1042 E-mail: victoria.howle@ttu.edu Lubbock, TX 79409 http Technical Report SAND2003-2927, Sandia National Laboratories, Albuquerque, New Mexico, August 2003. · S

  15. Development of Multilingual Acoustic Models in the GlobalPhone Project

    E-Print Network [OSTI]

    Schultz, Tanja

    , namely Ara­ bic, Chinese (Mandarin and Wu), Croatian, English, French, German, Japanese, Korean] #words vocabulary Arabic 100 u.w. 20 u.w. u.w. Croatian (+30) 83 4019 14 106K 20K Japanese 121 9785 25 1. The GlobalPhone Database (u.w.=under way) For training and testing we use Croatian, Japanese

  16. SPECIAL HOUSING ACCOMODATION REQUEST FORM SID# Email Address Cell Phone Number

    E-Print Network [OSTI]

    SPECIAL HOUSING ACCOMODATION REQUEST FORM Name SID# Email Address Cell Phone Number Special housing of accommodation. This Special Housing Accommodation Request Form is to be thoroughly completed and returned this documentation. Housing Services will make every attempt to accommodate housing preferences in conjunction

  17. Participatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion

    E-Print Network [OSTI]

    Bulusu, Nirupama

    their choices. Nevertheless, a major cause is the consumer search cost incurred in collecting pricingParticipatory Sensing in Commerce: Using Mobile Camera Phones to Track Market Price Dispersion In economics, price dispersion refers to the price difference of a homogeneous good across different vendors

  18. Business Name Year Address City State Zip Phone Email Address Contact

    E-Print Network [OSTI]

    water heating systems in the Tri-cities and surrounding area 2382 Solar Heating equipment installationBusiness Name Year Founded Address City State Zip Phone Email Address Contact First Name Contact Last Name URL Products/Services NAICS Code NAICS Description Energy Northwest 1957 PO Box 968 Richland

  19. Scheduling for a Modular Activity Recognition System to Reduce Energy Consumption on SmartPhones

    E-Print Network [OSTI]

    Beigl, Michael

    Scheduling for a Modular Activity Recognition System to Reduce Energy Consumption on Smart Computing Systems, Karlsruhe Institute of Technology (KIT) Abstract During the last years, mobile phones the activity recognition is totally switched off for certain periods, the power saving mechanisms native

  20. UCSC Student Health Services Student Health Insurance Office 1156 High Street Phone: (831) 459-2389

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    -line waiver process. Please have your insurance information available before you log-on to the on-line waiver: INSURANCE INFORMATION Ins. Company Name: Ins. Phone #: Member ID #: Group #: Insurance Address: Subscriber from the insurance company or an insurance agent. ** 4. Does your health insurance plan have a pre

  1. A Speech Processing Research Platform for Android Based Smart Phones and Tablets

    E-Print Network [OSTI]

    is called Speech Enhancement for Android (SEA) and incorporates past and present speech enhancement- ing staff can use this platform to perform speech enhancement and observe its effects. Index Terms: speech enhancement, speech processing, spec- trogram, Android, smart phone 1. Introduction

  2. MATH 121 SYLLABUS FALL 1997 Lecture Time Room Instructor Office Phone Call No.

    E-Print Network [OSTI]

    Baldwin, John T.

    Office Phone Call No. MWF 8 LC-D5 Stinespring624 SEO 3-0368 61306 MWF 9 LC-E1 Baldwin 417SEO 3-2149 61231 MWF 9 LC-D4 Gray 508 SEO 6-4828 31494 MWF 2 LC-D4 Tartakoff 516 SEO 6-2440 61440 MWF

  3. METIS: Exploring mobile phone sensing offloading for efficiently supporting social sensing applications

    E-Print Network [OSTI]

    Mascolo, Cecilia

    buildings are instrumented with a variety of sensors, such as RFID access control systems, Passive Infrared on the phone's battery. In this paper, we present the design, implementation, and evaluation of METIS implements a novel sensor task distribution scheme that dynamically decides whether to perform sensing

  4. Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2

    E-Print Network [OSTI]

    Pearce, Jon

    of when they were allowed to water their gardens, but there was and is still a lack of knowledge243 Using Mobile Phones for Promoting Water Conservation Rahuvaran Pathmanathan1, 2 , Jon Pearce2@unimelb.edu.au ABSTRACT We report a design investigation that seeks to help people to conserve water in their homes

  5. Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    Oklahoma State University-Tulsa Academic Advising Syllabus Advising Center Phone: 918-594-8271 130 North Hall Fax: 918-594-8246 700 N. Greenwood Ave. Hours: M-R, 8 am to 6 pm, F 8 am to 5 pm Tulsa, OK at OSU-Tulsa. OSU-TULSA ACADEMIC ADVISING MISSION STATEMENT The core values of Oklahoma State University-Tulsa

  6. Christiane Jablonowski Phone: 734 763 6238 University of Michigan Fax: 734 936 0503

    E-Print Network [OSTI]

    Jablonowski, Christiane

    Christiane Jablonowski Phone: 734 763 6238 University of Michigan Fax: 734 936 0503 Department ------------------------------------------------------------------------------------------------------------------------------ Associate Professor Sep. 2012 ­ current University of Michigan, Ann Arbor, Michigan Department of Atmospheric, Oceanic & Space Sciences (AOSS) Assistant Professor Sep. 2006 ­ Aug 2012 University of Michigan

  7. Chu-Lin (Mike) Cheng Department of Earth and Planetary Sciences Phone: (865) 974-0075

    E-Print Network [OSTI]

    Perfect, Ed

    , Transport in Porous Media (submitted) Kang, M. E. Perfect, C.L. Cheng, H. Z. Billheux, J. Lee, J. Horita the BC-vG Upscaler, Vadose Zone Journal. doi:10.2136/vzj2012.0174 Kang, M., E. Perfect, C.L. Cheng, H. ZApril 2013 Chu-Lin (Mike) Cheng Department of Earth and Planetary Sciences Phone: (865) 974

  8. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector June 7 meeting Cocks Friedman, Randy NW Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW-8553 bdickens@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen

  9. NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector

    E-Print Network [OSTI]

    NATURAL GAS ADVISORY COMMITTEE 2013-2015 Name Affiliation Phone E-mail Sector Cocks, Michael BPA Natural Gas (503) 721-2475 randy.friedman@nwnatural.com Distribution Finklea Edward NW Ind. Gas Users (503@ci.tacoma.wa.us Electric Utility Defenbach, Byron Intermountain Gas (208) 377-6080 bdefen@intgas.com Distribution Dahlberg

  10. Dianne Prost O'Leary Computer Science Department Phone: (301) 405-2678

    E-Print Network [OSTI]

    O'Leary, Dianne P.

    Dianne Prost O'Leary Professor Computer Science Department Phone: (301) 405-2678 and Institute Programmer at a university computing center Summer, 1971 April 24, 2014 1 D. P. O'Leary #12;II. Research are organized by field at http://www.cs.umd.edu/users/oleary/res12/. Books Authored [B2] Dianne P. O'Leary

  11. CELL PHONE and BLACKBERRY POLICY and PROCEDURES (Revision 3/18/2009)

    E-Print Network [OSTI]

    Fernandez, Eduardo

    phones or other devices are to (1) disaggregate individual personal usage from business usage; and, (2 for personal use by the employee. Policy The acquisition and use of cellular telephones and BlackBerry devices business and personal call, describing the type of business it relates to, the person called and the amount

  12. Effects of Cell Phone Radiofrequency Signal Exposure on Brain Glucos Metabolism

    SciTech Connect (OSTI)

    Volkow, N.D.; Wang, G.; Volkow, N.D.; Tomasi, D.; Wang, G.-J.; Vaska, P.; Fowler, J.S.; Telang, F.; Alexoff, D.; Logan, J.; Wong, C.

    2011-03-01T23:59:59.000Z

    The dramatic increase in use of cellular telephones has generated concern about possible negative effects of radiofrequency signals delivered to the brain. However, whether acute cell phone exposure affects the human brain is unclear. To evaluate if acute cell phone exposure affects brain glucose metabolism, a marker of brain activity. Randomized crossover study conducted between January 1 and December 31, 2009, at a single US laboratory among 47 healthy participants recruited from the community. Cell phones were placed on the left and right ears and positron emission tomography with ({sup 18}F)fluorodeoxyglucose injection was used to measure brain glucose metabolism twice, once with the right cell phone activated (sound muted) for 50 minutes ('on' condition) and once with both cell phones deactivated ('off' condition). Statistical parametric mapping was used to compare metabolism between on and off conditions using paired t tests, and Pearson linear correlations were used to verify the association of metabolism and estimated amplitude of radiofrequency-modulated electromagnetic waves emitted by the cell phone. Clusters with at least 1000 voxels (volume >8 cm{sup 3}) and P < .05 (corrected for multiple comparisons) were considered significant. Brain glucose metabolism computed as absolute metabolism ({micro}mol/100 g per minute) and as normalized metabolism (region/whole brain). Whole-brain metabolism did not differ between on and off conditions. In contrast, metabolism in the region closest to the antenna (orbitofrontal cortex and temporal pole) was significantly higher for on than off conditions (35.7 vs 33.3 {micro}mol/100 g per minute; mean difference, 2.4 [95% confidence interval, 0.67-4.2]; P = .004). The increases were significantly correlated with the estimated electromagnetic field amplitudes both for absolute metabolism (R = 0.95, P < .001) and normalized metabolism (R = 0.89; P < .001). In healthy participants and compared with no exposure, 50-minute cell phone exposure was associated with increased brain glucose metabolism in the region closest to the antenna. This finding is of unknown clinical significance.

  13. Control System Design for Automatic Cavity Tuning Machines

    SciTech Connect (OSTI)

    Carcagno, R.; Khabiboulline, T.; Kotelnikov, S.; Makulski, A.; Nehring, R.; Nogiec, J.; Ross, M.; Schappert, W.; /Fermilab; Goessel, A.; Iversen, J.; Klinke, D.; /DESY

    2009-05-01T23:59:59.000Z

    A series of four automatic tuning machines for 9-cell TESLA-type cavities are being developed and fabricated in a collaborative effort among DESY, FNAL, and KEK. These machines are intended to support high-throughput cavity fabrication for construction of large SRF-based accelerator projects. Two of these machines will be delivered to cavity vendors for the tuning of XFEL cavities. The control system for these machines must support a high level of automation adequate for industrial use by non-experts operators. This paper describes the control system hardware and software design for these machines.

  14. Galaxy morphology - an unsupervised machine learning approach

    E-Print Network [OSTI]

    Schutter, Andrew

    2015-01-01T23:59:59.000Z

    Structural properties posses valuable information about the formation and evolution of galaxies, and are important for understanding the past, present, and future universe. Here we use unsupervised machine learning methodology to analyze a network of similarities between galaxy morphological types, and automatically deduce a morphological sequence of galaxies. Application of the method to the EFIGI catalog show that the morphological scheme produced by the algorithm is largely in agreement with the De Vaucouleurs system, demonstrating the ability of computer vision and machine learning methods to automatically profile galaxy morphological sequences. The unsupervised analysis method is based on comprehensive computer vision techniques that compute the visual similarities between the different morphological types. Rather than relying on human cognition, the proposed system deduces the similarities between sets of galaxy images in an automatic manner, and is therefore not limited by the number of galaxies being ...

  15. Implementing Turing Machines in Dynamic Field Architectures

    E-Print Network [OSTI]

    Graben, Peter beim

    2012-01-01T23:59:59.000Z

    Cognitive computation such as e.g. language processing, is conventionally regarded as Turing computation, and Turing machines can be uniquely implemented as nonlinear dynamical systems using generalized shifts and subsequent G\\"odel encoding of the symbolic repertoire. The resulting nonlinear dynamical automata (NDA) are piecewise affine-linear maps acting on the unit square that is partitioned into rectangular domains. Iterating a single point, i.e. a microstate, by the dynamics yields a trajectory of, in principle, infinitely many points scattered through phase space. Therefore, the NDAs microstate dynamics does not necessarily terminate in contrast to its counterpart, the symbolic dynamics obtained from the rectangular partition. In order to regain the proper symbolic interpretation, one has to prepare ensembles of randomly distributed microstates with rectangular supports. Only the resulting macrostate evolution corresponds then to the original Turing machine computation. However, the introduction of rand...

  16. Hybrid-secondary uncluttered induction machine

    DOE Patents [OSTI]

    Hsu, John S. (Oak Ridge, TN)

    2001-01-01T23:59:59.000Z

    An uncluttered secondary induction machine (100) includes an uncluttered rotating transformer (66) which is mounted on the same shaft as the rotor (73) of the induction machine. Current in the rotor (73) is electrically connected to current in the rotor winding (67) of the transformer, which is not electrically connected to, but is magnetically coupled to, a stator secondary winding (40). The stator secondary winding (40) is alternately connected to an effective resistance (41), an AC source inverter (42) or a magnetic switch (43) to provide a cost effective slip-energy-controlled, adjustable speed, induction motor that operates over a wide speed range from below synchronous speed to above synchronous speed based on the AC line frequency fed to the stator.

  17. Machine Protection: Availability for Particle Accelerators

    E-Print Network [OSTI]

    Apollonio, Andrea; Schmidt, Ruediger

    2015-03-16T23:59:59.000Z

    Machine availability is a key indicator for the performance of the next generation of particle accelerators. Availability requirements need to be carefully considered during the design phase to achieve challenging objectives in different fields, as e.g. particle physics and material science. For existing and future High-Power facilities, such as ESS (European Spallation Source) and HL-LHC (High-Luminosity LHC), operation with unprecedented beam power requires highly dependable Machine Protection Systems (MPS) to avoid any damage-induced downtime. Due to the high complexity of accelerator systems, finding the optimal balance between equipment safety and accelerator availability is challenging. The MPS architecture, as well as the choice of electronic components, have a large influence on the achievable level of availability. In this thesis novel methods to address the availability of accelerators and their protection systems are presented. Examples of studies related to dependable MPS architectures are given i...

  18. R&D ERL: Machine Protection System

    SciTech Connect (OSTI)

    Altinbas, Z.

    2010-01-01T23:59:59.000Z

    The Machine Protection System (MPS) is a device-safety system that is designed to prevent damage to hardware by generating interlocks, based upon the state of input signals generated by selected sub-system. It exists to protect key machinery such as the 50 kW and 1 MW RF Systems. When a fault state occurs, the MPS is capable of responding with an interlock signal within several microseconds. The Machine Protection System inputs are designed to be fail-safe. In addition, all fault conditions are latched and time-stamped. The ERL MPS is based on a National Instruments hardware platform, and is programmed by utilizing National Instruments development environment for a visual programming language.

  19. Infinite Support Vector Machines in Speech Recognition

    E-Print Network [OSTI]

    Yang, Jingzhou; van Dalien, Rogier C.; Gales, M. J. F.

    2013-01-01T23:59:59.000Z

    Infinite Support Vector Machines in Speech Recognition Jingzhou Yang, Rogier C. van Dalen and Mark Gales Department of Engineering, University of Cambridge Trumpington Street, Cambridge, CB2 1PZ, UK {jy308,rcv25,mjfg}@eng.cam.ac.uk Abstract... ., Secaucus, NJ, USA, 2006. [14] Carl Edward Rasmussen, “The infinite Gaussian mixture model,” in Advances in Neural Information Processing Systems 12. 2000, pp. 554–560, MIT Press. [15] Yee Whye Teh, “Dirichlet processes,” in Encyclopedia of Ma- chine...

  20. Tight Binding Hamiltonians and Quantum Turing Machines

    E-Print Network [OSTI]

    Paul Benioff

    1996-10-17T23:59:59.000Z

    This paper extends work done to date on quantum computation by associating potentials with different types of computation steps. Quantum Turing machine Hamiltonians, generalized to include potentials, correspond to sums over tight binding Hamiltonians each with a different potential distribution. Which distribution applies is determined by the initial state. An example, which enumerates the integers in succession as binary strings, is analyzed. It is seen that for some initial states the potential distributions have quasicrystalline properties and are similar to a substitution sequence.

  1. An introducWon to Machine Learning

    E-Print Network [OSTI]

    Wehenkel, Louis

    ;8 Other applicaWons Machine learning has a wide spectrum of applicaWons including: Retail: Market opWmizaWon, rouWng BioinformaWcs: MoWfs, alignment Web mining: Search engines ... #12;9 Some: genes, proteins, words, pixels... 1VAR 2VAR 3VAR 4VAR 5VAR 6VAR 7VAR 8VAR 9VAR 10VAR 11VAR ... 1Object 0

  2. Abrasive slurry composition for machining boron carbide

    DOE Patents [OSTI]

    Duran, E.L.

    1984-11-29T23:59:59.000Z

    An abrasive slurry particularly suited for use in drilling or machining boron carbide consists essentially of a suspension of boron carbide and/or silicon carbide grit in a carrier solution consisting essentially of a dilute solution of alkylaryl polyether alcohol in octyl alcohol. The alkylaryl polyether alcohol functions as a wetting agent which improves the capacity of the octyl alcohol for carrying the grit in suspension, yet without substantially increasing the viscosity of the carrier solution.

  3. Abrasive slurry composition for machining boron carbide

    DOE Patents [OSTI]

    Duran, Edward L. (Santa Fe, NM)

    1985-01-01T23:59:59.000Z

    An abrasive slurry particularly suited for use in drilling or machining boron carbide consists essentially of a suspension of boron carbide and/or silicon carbide grit in a carrier solution consisting essentially of a dilute solution of alkylaryl polyether alcohol in octyl alcohol. The alkylaryl polyether alcohol functions as a wetting agent which improves the capacity of the octyl alcohol for carrying the grit in suspension, yet without substantially increasing the viscosity of the carrier solution.

  4. Positional reference system for ultraprecision machining

    DOE Patents [OSTI]

    Arnold, Jones B. (Knoxville, TN); Burleson, Robert R. (Clinton, TN); Pardue, Robert M. (Knoxville, TN)

    1982-01-01T23:59:59.000Z

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of position interferometers and part contour description data inputs to calculate error components for each axis of movement and output them to corresponding axis drives with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

  5. Positional reference system for ultraprecision machining

    DOE Patents [OSTI]

    Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

    1980-09-12T23:59:59.000Z

    A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

  6. Process for laser machining and surface treatment

    DOE Patents [OSTI]

    Neil, George R.; Shinn, Michelle D.

    2004-10-26T23:59:59.000Z

    An improved method and apparatus increasing the accuracy and reducing the time required to machine materials, surface treat materials, and allow better control of defects such as particulates in pulsed laser deposition. The speed and quality of machining is improved by combining an ultrashort pulsed laser at high average power with a continuous wave laser. The ultrashort pulsed laser provides an initial ultrashort pulse, on the order of several hundred femtoseconds, to stimulate an electron avalanche in the target material. Coincident with the ultrashort pulse or shortly after it, a pulse from a continuous wave laser is applied to the target. The micromachining method and apparatus creates an initial ultrashort laser pulse to ignite the ablation followed by a longer laser pulse to sustain and enlarge on the ablation effect launched in the initial pulse. The pulse pairs are repeated at a high pulse repetition frequency and as often as desired to produce the desired micromachining effect. The micromachining method enables a lower threshold for ablation, provides more deterministic damage, minimizes the heat affected zone, minimizes cracking or melting, and reduces the time involved to create the desired machining effect.

  7. Dovetail spoke internal permanent magnet machine

    DOE Patents [OSTI]

    Alexander, James Pellegrino (Ballston Lake, NY); EL-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Shah, Manoj Ramprasad (Latham, NY); VanDam, Jeremy Daniel (West Coxsackie, NY)

    2011-08-23T23:59:59.000Z

    An internal permanent magnet (IPM) machine is provided. The IPM machine includes a stator assembly and a stator core. The stator core also includes multiple stator teeth. The stator assembly is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface defining a cavity. The IPM machine also includes a rotor assembly and a rotor core. The rotor core is disposed inside the cavity and configured to rotate about the longitudinal axis. The rotor assembly further includes a shaft. The shaft further includes multiple protrusions alternately arranged relative to multiple bottom structures provided on the shaft. The rotor assembly also includes multiple stacks of laminations disposed on the protrusions and dovetailed circumferentially around the shaft. The rotor assembly further includes multiple pair of permanent magnets for generating a magnetic field, which magnetic field interacts with the stator magnetic field to produce a torque. The multiple pair of permanent magnets are disposed between the stacks. The rotor assembly also includes multiple middle wedges mounted between each pair of the multiple permanent magnets.

  8. 4/2/2014 RevolutionaryMiniscule Windmills to Recharge Cell phones -Researchmoz http://www.researchmoz.us/article/revolutionary-miniscule-windmills-to-recharge-cell-phones 1/1

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    Cell phones Similar Industry Reports: Heat Recovery Steam Generators (HRSGs) for Thermal Power, 2014 be made in bulk using batch processes and so, the price for fabricating a single unit of it w ill be same

  9. Department Name Title Phone Email HOD -Main Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu

    E-Print Network [OSTI]

    Bordenstein, Seth

    Department Name Title Phone Email HOD - Main Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu HOD - Community Leadership Paul Speer Associate Professor 322-3117 paul.w.speer@vanderbilt.edu HOD

  10. THERMAL SKIN DAMAGE AND MOBILE PHONE USE Elmountacer Billah Elabbassi(1)

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    in thé phone by thé battery currents and running of thé radiofrequency (RF) electronic circuits measured thé température of thé temporal skin due to GSM 1800 MHz MP radiated power (125 mW). To perforai a substantial part of thé radiated power is absorbed. Many epidemiological investigations of MP users [1, 2

  11. Means and method of balancing multi-cylinder reciprocating machines

    DOE Patents [OSTI]

    Corey, John A. (North Troy, NY); Walsh, Michael M. (Schenectady, NY)

    1985-01-01T23:59:59.000Z

    A virtual balancing axis arrangement is described for multi-cylinder reciprocating piston machines for effectively balancing out imbalanced forces and minimizing residual imbalance moments acting on the crankshaft of such machines without requiring the use of additional parallel-arrayed balancing shafts or complex and expensive gear arrangements. The novel virtual balancing axis arrangement is capable of being designed into multi-cylinder reciprocating piston and crankshaft machines for substantially reducing vibrations induced during operation of such machines with only minimal number of additional component parts. Some of the required component parts may be available from parts already required for operation of auxiliary equipment, such as oil and water pumps used in certain types of reciprocating piston and crankshaft machine so that by appropriate location and dimensioning in accordance with the teachings of the invention, the virtual balancing axis arrangement can be built into the machine at little or no additional cost.

  12. Method for measuring the contour of a machined part

    DOE Patents [OSTI]

    Bieg, L.F.

    1995-05-30T23:59:59.000Z

    A method is disclosed for measuring the contour of a machined part with a contour gage apparatus, having a probe assembly including a probe tip for providing a measure of linear displacement of the tip on the surface of the part. The contour gage apparatus may be moved into and out of position for measuring the part while the part is still carried on the machining apparatus. Relative positions between the part and the probe tip may be changed, and a scanning operation is performed on the machined part by sweeping the part with the probe tip, whereby data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip are recorded. The method further allows real-time adjustment of the apparatus machining the part, including real-time adjustment of the machining apparatus in response to wear of the tool that occurs during machining. 5 figs.

  13. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    SciTech Connect (OSTI)

    Lazarus, Lloyd

    2009-02-19T23:59:59.000Z

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  14. Entanglement-Based Machine Learning on a Quantum Computer

    E-Print Network [OSTI]

    X. -D. Cai; D. Wu; Z. -E. Su; M. -C. Chen; X. -L. Wang; L. Li; N. -L. Liu; C. -Y. Lu; J. -W. Pan

    2015-02-08T23:59:59.000Z

    Machine learning, a branch of artificial intelligence, learns from previous experience to optimize performance, which is ubiquitous in various fields such as computer sciences, financial analysis, robotics, and bioinformatics. A challenge is that machine learning with the rapidly growing "big data" could become intractable for classical computers. Recently, quantum machine learning algorithms [Lloyd, Mohseni, and Rebentrost, arXiv.1307.0411] were proposed which could offer an exponential speedup over classical algorithms. Here, we report the first experimental entanglement-based classification of 2-, 4-, and 8-dimensional vectors to different clusters using a small-scale photonic quantum computer, which are then used to implement supervised and unsupervised machine learning. The results demonstrate the working principle of using quantum computers to manipulate and classify high-dimensional vectors, the core mathematical routine in machine learning. The method can in principle be scaled to larger number of qubits, and may provide a new route to accelerate machine learning.

  15. Rotating electric machine with fluid supported parts

    DOE Patents [OSTI]

    Smith, Jr., Joseph L. (Concord, MA); Kirtley, Jr., James L. (Brookline, MA)

    1981-01-01T23:59:59.000Z

    A rotating electric machine in which the armature winding thereof and other parts are supported by a liquid to withstand the mechanical stresses applied during transient overloads and the like. In particular, a narrow gap is provided between the armature winding and the stator which supports it and this gap is filled with an externally pressurized viscous liquid. The liquid is externally pressurized sufficiently to balance the static loads on the armature winding. Transient mechanical loads which deform the armature winding alter the gap dimensions and thereby additionally pressurize the viscous liquid to oppose the armature winding deformation and more nearly uniformly to distribute the resulting mechanical stresses.

  16. Pattern formation in quantum Turing machines

    E-Print Network [OSTI]

    Ilki Kim; Guenter Mahler

    1999-02-05T23:59:59.000Z

    We investigate the iteration of a sequence of local and pair unitary transformations, which can be interpreted to result from a Turing-head (pseudo-spin $S$) rotating along a closed Turing-tape ($M$ additional pseudo-spins). The dynamical evolution of the Bloch-vector of $S$, which can be decomposed into $2^{M}$ primitive pure state Turing-head trajectories, gives rise to fascinating geometrical patterns reflecting the entanglement between head and tape. These machines thus provide intuitive examples for quantum parallelism and, at the same time, means for local testing of quantum network dynamics.

  17. Tight Binding Hamiltonians and Quantum Turing Machines

    SciTech Connect (OSTI)

    Benioff, P. [Physics Division, Argonne National Laboratory, Argonne, Illinois 60439 (United States)] [Physics Division, Argonne National Laboratory, Argonne, Illinois 60439 (United States)

    1997-01-01T23:59:59.000Z

    This paper extends work done to date on quantum computation by association of potentials with different types of steps. Quantum Turing machine Hamiltonians, generalized to include potentials, correspond to sums over tight binding Hamiltonians each with a different potential distribution. Which distribution applies is determined by the initial state. An example, which enumerates the integers in succession as binary strings, is analyzed. It is seen that for some initial states, the potential distributions have quasicrystalline properties and are similar to a substitution sequence. {copyright} {ital 1997} {ital The American Physical Society}

  18. Soil Machine Dynamics Ltd | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎ |RippeyInformationSoda Springs, Idaho: EnergyMachine

  19. Victory Power Machine Group | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin BaxinUmwelt ManagementVera IrrigationVestas WindVictory Power Machine

  20. Akrong Machine Services | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2,AUDITCaliforniaWeifangwikiAgoura Hills,OesteAkrong Machine Services Jump

  1. Rain Machine (Solar Still) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of ContaminationHubs+18, 2012 Qualified11 Connecticut2 of 3)the Office98Rain Machine

  2. JKernelMachines: A Simple Framework for Kernel Machines David Picard PICARD@ENSEA.FR

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    . Description of the Library The backbone of the library is the definition of data types and kernels. In order to use any type of input space, the library makes heavy use o, France Editor: Abstract JKernelMachines is a Java library for learning with kernels. It is primarily

  3. 09s1: COMP9417 Machine Learning and Data Mining Machine Learning for Numeric

    E-Print Network [OSTI]

    Bain, Mike

    · define the problem of non-linear regression · define neural network learning in terms of non-linear the regression and model tree approaches for non-linear regression COMP9417: April 1, 2009 Machine Learning learning) learning non-linear predictors via hidden nodes between input and output · regression trees

  4. A Machine-by-Machine Analysis of a Bi-Objective Resource Allocation Problem

    E-Print Network [OSTI]

    Maciejewski, Anthony A.

    , CO, 80523 Abstract-- As high performance computing systems contin- ually become faster, the operating of adding or removing machines from their high performance computing systems. We perform our study using the energy consumption more than doubled for high performance computing (HPC) systems, resulting in servers

  5. Multi-group Support Vector Machines with measurement costs

    E-Print Network [OSTI]

    Emilio Carrizosa

    2006-05-11T23:59:59.000Z

    May 11, 2006 ... Multi-group Support Vector Machines with measurement costs: a biobjective approach. Emilio Carrizosa (ecarrizosa ***at*** us.es)

  6. Hybrid MPI/OpenMP parallel support vector machine training

    E-Print Network [OSTI]

    Kristian Woodsend

    2009-01-12T23:59:59.000Z

    Jan 12, 2009 ... A parallel implementation of Support Vector Machine training has been developed, using a combination of MPI and OpenMP. Using an interior ...

  7. Global Mainframe As A Cloud Machine Market Size, Share, Growth...

    Open Energy Info (EERE)

    and plan, Mainframe As A Cloud Machine product specification, manufacturing process, cost structure etc. Then we deeply analyzed the world's main region market conditions that...

  8. Sample Size Selection in Optimization Methods for Machine Learning

    E-Print Network [OSTI]

    2011-10-18T23:59:59.000Z

    Oct 18, 2011 ... optimization algorithms for machine learning and stochastic ..... stochastic nature of the problem, we could try to derive conditions of the sam-.

  9. High Metal Removal Rate Process for Machining Difficult Materials

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    precision to manufacture parts with complex shapes or micron-sized features. The use of ultrafast (femtosecond) lasers can overcome these limitations and machine advanced...

  10. alternating current machines: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Websites Summary: mover speed is variable, such as in wind turbines. For variable speed operation one of the machine's stator windings is connected to the fixed frequency...

  11. Covered Product Category: Air-Cooled Ice Machines

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for air-cooled ice machines, which are covered by the ENERGY STAR program.

  12. absorption machine based: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 to effectively incorporate advice into the passive-aggressive Kunapuli, Gautam 8 Turing machines based on unsharp quantum logic Quantum Physics (arXiv) Summary: In this...

  13. An application of Laplace transforms to a machine maintenance problem 

    E-Print Network [OSTI]

    Boone, James Robert

    1962-01-01T23:59:59.000Z

    (h) = 0. Considering m independently operating machines in the system, it is convenient to associate with this system m+ 1 states: 0, 0, 0 0 0 . The system is considered to be state 0 if n machines are not operative, m' n hence m-n machines... are operative. This is a system of. independently operating machines which are repaired without queueing, then, the system may be in state 0 at time n t + h in the following four mutually exclusive ways: (1) The state 0 can exist at time t with no repair...

  14. A strong conic quadratic reformulation for machine-job assignment ...

    E-Print Network [OSTI]

    M. Selim Akturk

    2007-06-26T23:59:59.000Z

    Jun 26, 2007 ... A strong conic quadratic reformulation for machine-job assignment with ... Category 2: Linear, Cone and Semidefinite Programming ...

  15. accelerator machines cathode: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduce this waste of energy, the potential for waste recovery and equipment available for waste heat recovery. Areas under study include the press section, paper machine dryer...

  16. 24.119 Mind and Machines, Spring 2005

    E-Print Network [OSTI]

    Byrne, Alexander

    Examination of problems in the intersection of artificial intelligence, psychology, and philosophy. Issues discussed: whether people are Turing Machines, whether computers can be conscious, limitations on what computers ...

  17. 24.119 Mind and Machines, Spring 2003

    E-Print Network [OSTI]

    Byrne, Alexander

    Examination of problems in the intersection of artificial intelligence, psychology, and philosophy. Issues discussed: whether people are Turing Machines, whether computers can be conscious, limitations on what computers ...

  18. Analysis and behavioral modeling of the Finite State Machines of the Xpress Transfer Protocol

    E-Print Network [OSTI]

    Madduri, Venkateswara Rao

    1994-01-01T23:59:59.000Z

    OF THE 3. 4 SPECIFICATION OF THE XTP FINITE STATE MACHINES . A. XTP Context Manager State Machine B. XTP Output State Machine C. XTP Sync State Machine. D. XTP Rate Control State Machine E. XTP Control-Send State Machine. . . F. XTP Input State... control parameters 26 II XTP context manager state transition table[12]. III XTP output state machine transition table [12]. IV XTP sync state machine transition table[12]. 40 V XTP rate control state machine transition table[12]. VI XTP control...

  19. Refueling machine with relative positioning capability

    DOE Patents [OSTI]

    Challberg, R.C.; Jones, C.R.

    1998-12-15T23:59:59.000Z

    A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs.

  20. Evaluation of machining dispersions for turning process

    E-Print Network [OSTI]

    Arnaud Lefebvre; Valery Wolff

    2008-03-03T23:59:59.000Z

    In this article we propose to extend the model of simulation of dispersions in turning based on the geometrical specifications. Our study is articulated around two trends of development: the first trend relates to the geometrical model. The geometrical model suggested must allow a follow-up of the geometry of the part during the simulation of machining. It is thus a question of carrying out a systematic treatment of the whole dimensioning and tolerancing process while being based on the principles of the \\DeltaL method. We also planned to integrate this type of specification in the model of simulation of machining suggested. It is more generally a question of extending the traditional model for better taking into account the multi axis specification of coaxiality and perpendicularity on the turned workpieces. The second trend of our study relates to the widening of the field of application of the model. We propose to extend the field of application of the model by taking into account the modifications of several parameters of the manufacturing process plans, likely to involve variations of dispersions.

  1. Publish date: 06/27/2011 ECE 4391: Electric Machines and Drives

    E-Print Network [OSTI]

    Gelfond, Michael

    and induction machines. Space vector theory. Field oriented control. Modeling of machine and controller dynamics Steady state and dynamic models of DC machines ­ 3 hours Closed loop control of DC machines ­ 3 hours hours Dynamic models of AC induction machines; model validation ­ 5 hours V/f control of induction

  2. Speeding up Ozone Profile Retrieval using Machine Learning Techniques

    E-Print Network [OSTI]

    Emmerich, Michael

    Speeding up Ozone Profile Retrieval using Machine Learning Techniques L.M. Strijbosch April 25 to the process of ozone profile retrieval, a method for retrieving a global ozone distribution from satellite Machines are selected to replace the forward model, which is the slowest part of ozone profile retrieval

  3. A Note on Platt's Probabilistic Outputs for Support Vector Machines

    E-Print Network [OSTI]

    Abu-Mostafa, Yaser S.

    A Note on Platt's Probabilistic Outputs for Support Vector Machines Hsuan-Tien Lin (htlin, National Chengchi University, Taipei 116, Taiwan Abstract. Platt's probabilistic outputs for Support Vector Machines (Platt, 2000) has been popular for applications that require posterior class probabilities

  4. NuFact'03 machine working group summary

    SciTech Connect (OSTI)

    T.R. Edgecock; S. Machida; R.A. Rimmer

    2004-10-01T23:59:59.000Z

    The machine working group sessions at NuFact workshops have always been characterized by the presentation and discussion of both new ideas and the developments in existing concepts and by lively debate. The machine sessions at NuFact'03 were no exception to this. In this article, we will try and summarize the work presented and the discussion that took place.

  5. Implementing Fault-Tolerant Services Using State Machines: Beyond Replication

    E-Print Network [OSTI]

    Garg, Vijay

    set-up, we argue that our set-up is practically useful. Any large system is generally constructed in distributed systems based on the idea of fused state machines. The theory of fused state machines uses a combination of coding theory and replication to ensure efficiency as well as savings in power and storage

  6. Waves for alpha channeling in mirror machines A. I. Zhmoginova

    E-Print Network [OSTI]

    instabilities,10,11 par- ticle injection,12,13 and plasma diagnostics.14­17 Alpha chan- neling is a recently and fuel ion injection.24,33 The -channeling effect in a mirror machine was shown24­26 to be possible-dimensional ray-tracing equations to study wave propa- gation in the central cell of a mirror machine. Assuming

  7. Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT

    E-Print Network [OSTI]

    Farritor, Shane

    Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: TRAINING AND INSPECTIONS during maintenance and repair operations. In these situations, a Lockout/Tagout (LO/TO) program must "Control of Hazardous Energy: Lockout/Tagout (LO/TO) for Machines and Equipment." This course is available

  8. Department of Industrial Engineering Spring 2011 Machining Valve Seats

    E-Print Network [OSTI]

    Demirel, Melik C.

    PENNSTATE Department of Industrial Engineering Spring 2011 Machining Valve Seats Overview: The team worked with Quaker Chemical Corporation to machine valve seats using three different lubricants provided-degree chamfer on the valve seats are very specialized and expensive. For this project, the cutting tool

  9. Kernel spectral clustering for predicting maintenance of industrial machines

    E-Print Network [OSTI]

    to deal with sensory faults have been used [1],[2],[3]: corrective maintenance, preventive maintenance the machine fails, it is expensive and safety and environment issues arise. Preventive maintenance is basedKernel spectral clustering for predicting maintenance of industrial machines Rocco Langone1, Carlos

  10. Insights from Machine Learning Applied to Human Visual Classification

    E-Print Network [OSTI]

    Insights from Machine Learning Applied to Human Visual Classification Arnulf B. A. Graf and Felix A to understand visual classification in humans using both psy- chophysical and machine learning techniques). On an algorithmic level, however, methods and understanding of brain processes are still limited. Here we report

  11. Insights from Machine Learning Applied to Human Visual Classification

    E-Print Network [OSTI]

    Insights from Machine Learning Applied to Human Visual Classification Arnulf B. A. Graf and Felix A both psy- chophysical and machine learning techniques. Frontal views of human faces were used processes are still limited. Here we report on a study combining psychophysical and ma- chine learning

  12. THE INFLUENCING MACHINE BROOKE GLADSTONE ON THE MEDIA

    E-Print Network [OSTI]

    Pantaleone, Jim

    THE INFLUENCING MACHINE BROOKE GLADSTONE ON THE MEDIA UAA/APU Books Yearof the www. When members of the community take it upon themselves to report on an issue or event using the press. "A Picture is Worth a Thousand Words." Does The Influencing Machine affirm this statement? Please

  13. Technical and Cost Assessment of the PCAST Machine

    E-Print Network [OSTI]

    Technical and Cost Assessment of the PCAST Machine Final Report PCAST Volume 1 - ITER Introduction, and as a detailed report. Mission The Scientific Mission of the PCAST Machine is to explore the physics of ignition the "Optimized" PCAST Design Point Conclusions Final Report wtroductioq Chanter 1.0 . .- VSICSBw . Chanter 2

  14. ION BEAM MACHINING OF NIOBIUM WEAKLY SUPERCONDUCTING MICROBRIDGES

    E-Print Network [OSTI]

    Boyer, Edmond

    179 ION BEAM MACHINING OF NIOBIUM WEAKLY SUPERCONDUCTING MICROBRIDGES R. ADDE, P. CROZAT, S réduite représentant la structure à usiner. Les propriétés de microponts Josephson en niobium sont ensuite to be machin- ed. We describe and discuss the superconducting properties of niobium Josephson microbridges

  15. Stator current demodulation for induction machine rotor faults diagnosis

    E-Print Network [OSTI]

    Boyer, Edmond

    with emphasis on stator current processing [1], [2]. It has been proven that mechanical and electrical faultsStator current demodulation for induction machine rotor faults diagnosis El Houssin El Bouchikhi of the stator currents. Hence, demodulation of the stator currents is of high interest for induction machines

  16. Machine Learning for the New York City Power Grid

    E-Print Network [OSTI]

    Rudin, Cynthia

    1 Machine Learning for the New York City Power Grid Cynthia Rudin, David Waltz, Roger N. Anderson are sufficiently accurate to assist in maintaining New York City's electrical grid. Index Terms--applications of machine learning, electrical grid, smart grid, knowledge discovery, supervised ranking, computational

  17. 10-702: Statistical Machine Learning Syllabus, Spring 2010

    E-Print Network [OSTI]

    Guestrin, Carlos

    for the course are to be completed using the R programming lan- guage. R is an 10-702: Statistical Machine Learning Syllabus, Spring 2010 http://www.cs.cmu.edu/~10702 Statistical Machine Learning (10-701) and Intermediate Statistics (36-705). The term "statistical" in the title

  18. Fiber optic diagnostic techniques for the electrical discharge machining process

    E-Print Network [OSTI]

    Pillans, Brandon William

    1998-01-01T23:59:59.000Z

    were used along with current pulse waveforms from the EDM machine to study the temporal characteristics of the spark. During this experiment an optical pattern was identified that indicated when an arc was being formed in the EDM machine instead of a...

  19. Permanent Magnets Synchronous Machines Faults Detection and Identification

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    for permanent magnet synchronous machines (PMSM). Two main faults occurring on these machines are identified of the PMSM is devel- oped and simulated using Matlab Simulink. The model enables simulating nominal and faulty PMSM behavior, with several stages of degradation, and is supported by tests results. Specific

  20. Traction sheave elevator, hoisting unit and machine space

    DOE Patents [OSTI]

    Hakala, Harri (Hyvinkaa, FI); Mustalahti, Jorma (Hyvinkaa, FI); Aulanko, Esko (Kerava, FI)

    2000-01-01T23:59:59.000Z

    Traction sheave elevator consisting of an elevator car moving along elevator guide rails, a counterweight moving along counterweight guide rails, a set of hoisting ropes (3) on which the elevator car and counterweight are suspended, and a drive machine unit (6) driving a traction sheave (7) acting on the hoisting ropes (3) and placed in the elevator shaft. The drive machine unit (6) is of a flat construction. A wall of the elevator shaft is provided with a machine space with its open side facing towards the shaft, the essential parts of the drive machine unit (6) being placed in the space. The hoisting unit (9) of the traction sheave elevator consists of a substantially discoidal drive machine unit (6) and an instrument panel (8) mounted on the frame (20) of the hoisting unit.

  1. Insulation condition monitoring and testing for large electrical machines

    SciTech Connect (OSTI)

    Zhou, Y.; Dix, G.I.; Quaife, P.W. [Industrial Research Ltd., Christchurch (New Zealand)

    1996-12-31T23:59:59.000Z

    An efficient method to assess the insulation condition of rotating machines is on-line partial discharge monitoring. Difficulties in on-line monitoring result from various noise sources associated with the machine and from the power system. The paper introduces and discusses the theories, different testing techniques and monitoring methods currently used by Industrial Research Limited and other laboratories. The design and testing of high frequency current transformers for partial discharge on-line monitoring are introduced. Laboratory and field tests on electrical machines are presented. A database has been developed for efficient insulation monitoring and maintenance. The database allows intra and inter comparisons of partial discharge, tan delta, capacitance between phases in a machine and with other machines easily. The functions of the database enhance the efficiency and provide more information for effective insulation condition assessment.

  2. Peak thrust operation of linear induction machines from parameter identification

    SciTech Connect (OSTI)

    Zhang, Z.; Eastham, T.R.; Dawson, G.E. [Queen`s Univ., Kingston, Ontario (Canada). Dept. of Electrical and Computer Engineering

    1995-12-31T23:59:59.000Z

    Various control strategies are being used to achieve high performance operation of linear drives. To maintain minimum volume and weight of the power supply unit on board the transportation vehicle, peak thrust per unit current operation is a desirable objective. True peak thrust per unit current through slip control is difficult to achieve because the parameters of linear induction machines vary during normal operation. This paper first develops a peak thrust per unit current control law based on the per-phase equivalent circuit for linear induction machines. The algorithm for identification of the variable parameters in induction machines is then presented. Application to an operational linear induction machine (LIM) demonstrates the utility of this algorithm. The control strategy is then simulated, based on an operational transit LIM, to show the capability of achieving true peak thrust operation for linear induction machines.

  3. On Quantum Turing Machine Halting Deterministically

    E-Print Network [OSTI]

    Min Liang; Li Yang

    2012-02-29T23:59:59.000Z

    We define a subclass of quantum Turing machine (QTM) named SR-QTM, which halts deterministically and has deterministic tape head position. A quantum state transition diagram (QSTD) is proposed to describe SR-QTM. With the help of QSTD, we construct a SR-QTM which is universal for all near-trivial transformations. This means there exists a QTM which is universal for the above subclass. Finally we prove that SR-QTM is computational equivalent with ordinary QTM in the bounded error setting. It can be seen that, because SR-QTM has the same time steps for different branches of computation, the halting scheme problem will not exist when considering SR-QTM as a model of quantum computing.

  4. On Quantum Turing Machine Halting Deterministically

    E-Print Network [OSTI]

    Liang, Min

    2012-01-01T23:59:59.000Z

    We define a subclass of quantum Turing machine (QTM) named SR-QTM, which halts deterministically and has deterministic tape head position. A quantum state transition diagram (QSTD) is proposed to describe SR-QTM. With the help of QSTD, we construct a SR-QTM which is universal for all near-trivial transformations. This means there exists a QTM which is universal for the above subclass. Finally we prove that SR-QTM is computational equivalent with ordinary QTM in the bounded error setting. It can be seen that, because SR-QTM has the same time steps for different branches of computation, the halting scheme problem will not exist when considering SR-QTM as a model of quantum computing.

  5. Alan Turing, Turing Machines and Stronger

    E-Print Network [OSTI]

    Matjaž Gams

    2012-01-01T23:59:59.000Z

    informatics are comparable to those of Albert Einstein in physics. Turing’s contributions are presented through his most important events and achievements, particularly through the concept of the hypercomputer; that is, computers that are stronger than the Universal Turing Machines. The paper analyzes several essential AI and human-intelligence concepts that Turing introduced. Part of the paper discusses Donald Michie, Alan Turing’s co-worker and contemporary and an honorary member of the Jozef Stefan Institute. Even though 2012 marks a century since Turing’s birth, he remains largely unknown around the world. This paper makes an appeal for Turing’s full recognition and acknowledges contributions to Turing’s career. Povzetek: Prispevki Alana Turinga so predstavljeni s tezo, da je za ra?unalništvo njegov prispevek tako pomemben kot prispevek Alberta Einsteina za fiziko.

  6. Thermal machines beyond the weak coupling regime

    E-Print Network [OSTI]

    R. Gallego; A. Riera; J. Eisert

    2014-11-13T23:59:59.000Z

    How much work can be extracted from a heat bath using a thermal machine? The study of this question has a very long tradition in statistical physics in the weak-coupling limit, applied to macroscopic systems. However, the assumption that thermal heat baths remain uncorrelated with physical systems at hand is less reasonable on the nano-scale and in the quantum setting. In this work, we establish a framework of work extraction in the presence of quantum correlations. We show in a mathematically rigorous and quantitative fashion that quantum correlations and entanglement emerge as a limitation to work extraction compared to what would be allowed by the second law of thermodynamics. At the heart of the approach are operations that capture naturally non-equilibrium dynamics encountered when putting physical systems into contact with each other. We discuss various limits that relate to known results and put our work into context of approaches to finite-time quantum thermodynamics.

  7. Fingerprinting Communication and Computation on HPC Machines

    SciTech Connect (OSTI)

    Peisert, Sean

    2010-06-02T23:59:59.000Z

    How do we identify what is actually running on high-performance computing systems? Names of binaries, dynamic libraries loaded, or other elements in a submission to a batch queue can give clues, but binary names can be changed, and libraries provide limited insight and resolution on the code being run. In this paper, we present a method for"fingerprinting" code running on HPC machines using elements of communication and computation. We then discuss how that fingerprint can be used to determine if the code is consistent with certain other types of codes, what a user usually runs, or what the user requested an allocation to do. In some cases, our techniques enable us to fingerprint HPC codes using runtime MPI data with a high degree of accuracy.

  8. Radioactive hot cell access hole decontamination machine

    DOE Patents [OSTI]

    Simpson, William E. (Richland, WA)

    1982-01-01T23:59:59.000Z

    Radioactive hot cell access hole decontamination machine. A mobile housing has an opening large enough to encircle the access hole and has a shielding door, with a door opening and closing mechanism, for uncovering and covering the opening. The housing contains a shaft which has an apparatus for rotating the shaft and a device for independently translating the shaft from the housing through the opening and access hole into the hot cell chamber. A properly sized cylindrical pig containing wire brushes and cloth or other disks, with an arrangement for releasably attaching it to the end of the shaft, circumferentially cleans the access hole wall of radioactive contamination and thereafter detaches from the shaft to fall into the hot cell chamber.

  9. Sequence Logos, Machine/Channel Capacity, Maxwell's Demon, and Molecular Computers: a Review of the

    E-Print Network [OSTI]

    Schneider, Thomas D.

    Sequence Logos, Machine/Channel Capacity, Maxwell's Demon, and Molecular Computers: a Review. D. Schneider. Sequence logos, machine/channel capacity, Maxwell's demon, and molecular computers

  10. Introduction If it should turn out that the basic logics of a machine designed for the numerical

    E-Print Network [OSTI]

    Mohri, Mehryar

    as a model of any other machine. The special machine may be called the universal machine . . . --Alan Turing the English logician Alan Turing that enabled him to understand the fundamental fact that a computing machine

  11. Remote machine engineering applications for nuclear facilities decommissioning

    SciTech Connect (OSTI)

    Toto, G.; Wyle, H.R.

    1983-01-01T23:59:59.000Z

    Decontamination and decommissioning of a nuclear facility require the application of techniques that protect the worker and the enviroment from radiological contamination and radiation. Remotely operated portable robotic arms, machines, and devices can be applied. The use of advanced systems should enhance the productivity, safety, and cost facets of the efforts; remote automatic tooling and systems may be used on any job where job hazard and other factors justify application. Many problems based on costs, enviromental impact, health, waste generation, and political issues may be mitigated by use of remotely operated machines. The work that man can not do or should not do will have to be done by machines.

  12. Water spray ventilator system for continuous mining machines

    DOE Patents [OSTI]

    Page, Steven J. (Pittsburgh, PA); Mal, Thomas (Pittsburgh, PA)

    1995-01-01T23:59:59.000Z

    The invention relates to a water spray ventilator system mounted on a continuous mining machine to streamline airflow and provide effective face ventilation of both respirable dust and methane in underground coal mines. This system has two side spray nozzles mounted one on each side of the mining machine and six spray nozzles disposed on a manifold mounted to the underside of the machine boom. The six spray nozzles are angularly and laterally oriented on the manifold so as to provide non-overlapping spray patterns along the length of the cutter drum.

  13. Flotation machine and process for removing impurities from coals

    DOE Patents [OSTI]

    Szymocha, K.; Ignasiak, B.; Pawlak, W.; Kulik, C.; Lebowitz, H.E.

    1997-02-11T23:59:59.000Z

    The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal. 4 figs.

  14. Flotation machine and process for removing impurities from coals

    DOE Patents [OSTI]

    Szymocha, Kazimierz (Edmonton, CA); Ignasiak, Boleslaw (Edmonton, CA); Pawlak, Wanda (Edmonton, CA); Kulik, Conrad (Newark, CA); Lebowitz, Howard E. (Mountain View, CA)

    1997-01-01T23:59:59.000Z

    The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

  15. Flotation machine and process for removing impurities from coals

    DOE Patents [OSTI]

    Szymocha, Kazimierz (Edmonton, CA); Ignasiak, Boleslaw (Edmonton, CA); Pawlak, Wanda (Edmonton, CA); Kulik, Conrad (Newark, CA); Lebowitz, Howard E. (Mountain View, CA)

    1995-01-01T23:59:59.000Z

    The present invention is directed to a type of flotation machine that combines three separate operations in a single unit. The flotation machine is a hydraulic separator that is capable of reducing the pyrite and other mineral matter content of a coal. When the hydraulic separator is used with a flotation system, the pyrite and certain other minerals particles that may have been entrained by hydrodynamic forces associated with conventional flotation machines and/or by the attachment forces associated with the formation of microagglomerates are washed and separated from the coal.

  16. System and method for cooling a superconducting rotary machine

    DOE Patents [OSTI]

    Ackermann, Robert Adolf (Schenectady, NY); Laskaris, Evangelos Trifon (Schenectady, NY); Huang, Xianrui (Clifton Park, NY); Bray, James William (Niskayuna, NY)

    2011-08-09T23:59:59.000Z

    A system for cooling a superconducting rotary machine includes a plurality of sealed siphon tubes disposed in balanced locations around a rotor adjacent to a superconducting coil. Each of the sealed siphon tubes includes a tubular body and a heat transfer medium disposed in the tubular body that undergoes a phase change during operation of the machine to extract heat from the superconducting coil. A siphon heat exchanger is thermally coupled to the siphon tubes for extracting heat from the siphon tubes during operation of the machine.

  17. Review: Avgust Pavel: Prekmurska Slovenska Slovnica. Vend Nyelvtan

    E-Print Network [OSTI]

    Šek Mertü k, Polonca

    2014-06-25T23:59:59.000Z

    #3;SUHG#3;QMHQLP#3; QDVWDQNRP#15;#3;åH#3;Y#3;þDVX#3;âWHIDQD#3;.]PLþD#15;#3; GD#3;EL#3;ODKNR#3;ELO#3;SUHNPXUVNL#3;NQMLåQL#3;MH]LN#3; QRUPLUDQ#3;åH#3;RE#3;VYRMHP#3;QDVWDQNX#3;#11;#20;#26;#26;#20;#12;#17;#3; 6ORYQLFD#3;MH#3;QDVWDOD#3;ªY#3;QHXJRGQHP#3;þ...DYORYH#3; VORYQLFH#29;#3; URNRSLV#3; VH#3; QDKDMD#3; Y#3; 3DYORYL#3; VSRPLQVNL#3; VREL#3; QD#3;.DWHGUL#3; ]D#3; VODYLVWL-­ NR#3;8QLYHU]LWHWQHJD#3; VUHGLãþD#3;6DYDULD#3; Y#3; 6RPERWHOX#15;#3; WLSNRSLV#3; SD#3; KUDQL#3;0X]HM#3; 6DYDULD#3;Y#3;6RPERWHOX#17...

  18. Product Standards for Vending Equipment (Japan) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation,Pillar Group BV Jump to: navigation,PowerInformation

  19. Phone (312) 996-8098 Fax (312) 996-4394 tutorium@uic.edu www.uic.edu/depts/tie Tutorium in Intensive English (MC 324)

    E-Print Network [OSTI]

    Illinois at Chicago, University of

    Phone (312) 996-8098 Fax (312) 996-4394 tutorium@uic.edu www.uic.edu/depts/tie Tutorium to the map on the reverse side for directions to UIC. #12;Phone (312) 996-8098 Fax (312) 996-4394 tutorium

  20. SVR vs MLP for Phone Duration Modelling in HMM-based Speech Synthesis Alexandros Lazaridis, Pierre-Edouard Honnet, Philip N. Garner

    E-Print Network [OSTI]

    , 7]. Over the last years, many im- provements have been introduced in HMM-based speech syn- thesis models of multiple levels, e.g. state and phone levels [13], state, phone and syllable levels [14], using full covariance Gaussian distribu- tion [15] or implementing Gamma distribution instead of Gaus- sian

  1. Phone: (765) 494-5146 E-mail: environment@purdue.edu Web: http://www.purdue.edu/DP/environment Center for the Environment

    E-Print Network [OSTI]

    " Phone: (765) 494-5146 · E-mail: environment@purdue.edu · Web: http overlapping aspects of the environmental challenges facing the world today. By emphasizing the deep connection-making and behavior #12;" " Phone: (765) 494-5146 · E-mail: environment@purdue.edu · Web: http

  2. Method for laser machining explosives and ordnance

    DOE Patents [OSTI]

    Muenchausen, Ross E.; Rivera, Thomas; Sanchez, John A.

    2003-05-06T23:59:59.000Z

    Method for laser machining explosives and related articles. A laser beam is directed at a surface portion of a mass of high explosive to melt and/or vaporize the surface portion while directing a flow of gas at the melted and/or vaporized surface portion. The gas flow sends the melted and/or vaporized explosive away from the charge of explosive that remains. The method also involves splitting the casing of a munition having an encased explosive. The method includes rotating a munition while directing a laser beam to a surface portion of the casing of an article of ordnance. While the beam melts and/or vaporizes the surface portion, a flow of gas directed at the melted and/or vaporized surface portion sends it away from the remaining portion of ordnance. After cutting through the casing, the beam then melts and/or vaporizes portions of the encased explosive and the gas stream sends the melted/vaporized explosive away from the ordnance. The beam is continued until it splits the article, after which the encased explosive, now accessible, can be removed safely for recycle or disposal.

  3. Statistical performance of support vector machines

    E-Print Network [OSTI]

    Blanchard, Gilles; Massart, Pascal

    2008-01-01T23:59:59.000Z

    The support vector machine (SVM) algorithm is well known to the computer learning community for its very good practical results. The goal of the present paper is to study this algorithm from a statistical perspective, using tools of concentration theory and empirical processes. Our main result builds on the observation made by other authors that the SVM can be viewed as a statistical regularization procedure. From this point of view, it can also be interpreted as a model selection principle using a penalized criterion. It is then possible to adapt general methods related to model selection in this framework to study two important points: (1) what is the minimum penalty and how does it compare to the penalty actually used in the SVM algorithm; (2) is it possible to obtain ``oracle inequalities'' in that setting, for the specific loss function used in the SVM algorithm? We show that the answer to the latter question is positive and provides relevant insight to the former. Our result shows that it is possible to...

  4. LTC vacuum blasting machine (metal): Baseline report

    SciTech Connect (OSTI)

    NONE

    1997-07-31T23:59:59.000Z

    The LTC coating removal technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC coating removal system consisted of several hand tools, a Roto Peen scaler, and a needlegun. They are designed to remove coatings from steel, concrete, brick, and wood. These hand tools are used with the LTC PTC-6 vacuum system to capture dust and debris as removal of the coating takes place. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. The dust exposure was minimal but noise exposure was significant. Further testing for each exposure is recommended because of the environment where the testing demonstration took place. It is feasible that the dust and noise levels will be higher in an enclosed operating environment of different construction. In addition, other areas of concern found were arm-hand vibration, whole-body vibration, ergonomics, heat stress, tripping hazards, electrical hazards, machine guarding, and lockout/tagout.

  5. LTC vacuum blasting machine (concrete): Baseline report

    SciTech Connect (OSTI)

    NONE

    1997-07-31T23:59:59.000Z

    The LTC shot blast technology was tested and is being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The LTC 1073 Vacuum Blasting Machine uses a high-capacity, direct-pressure blasting system which incorporates a continuous feed for the blast media. The blast media cleans the surface within the contained brush area of the blast. It incorporates a vacuum system which removes dust and debris from the surface as it is blasted. The safety and health evaluation during the testing demonstration focused on two main areas of exposure: dust and noise. Dust exposure during maintenance activities was minimal, but due to mechanical difficulties dust monitoring could not be conducted during operation. Noise exposure was significant. Further testing for each of these exposures is recommended because of the outdoor environment where the testing demonstration took place. This may cause the results to be inaccurate. It is feasible that the dust and noise levels will be higher in an enclosed environment. In addition, other safety and health issues found were ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, and arm-hand vibration.

  6. Machine Cognition Models: EPAM and GPS

    E-Print Network [OSTI]

    Elouafiq, Ali

    2012-01-01T23:59:59.000Z

    Through history, the human being tried to relay its daily tasks to other creatures, which was the main reason behind the rise of civilizations. It started with deploying animals to automate tasks in the field of agriculture(bulls), transportation (e.g. horses and donkeys), and even communication (pigeons). Millenniums after, come the Golden age with "Al-jazari" and other Muslim inventors, which were the pioneers of automation, this has given birth to industrial revolution in Europe, centuries after. At the end of the nineteenth century, a new era was to begin, the computational era, the most advanced technological and scientific development that is driving the mankind and the reason behind all the evolutions of science; such as medicine, communication, education, and physics. At this edge of technology engineers and scientists are trying to model a machine that behaves the same as they do, which pushed us to think about designing and implementing "Things that-Thinks", then artificial intelligence was. In this...

  7. Techniques calm fear of imaging machine

    SciTech Connect (OSTI)

    Van Pelt, D.

    1990-04-02T23:59:59.000Z

    Magnetic resonance imaging has become a valuable tool in diagnosing diseases, and the imaging devices are now used as often as 2 million times a year in the United States. But as many as 10 percent of patients advised to undergo the procedure cannot because they become overwhelmed with claustrophobialike fear triggered by having to lie motionless in the machine's tunnel-like cylinder for about 45 minutes. To counteract this fear, several hospitals now practice various techniques to help reduce the feelings of confinement. One popular method is to give a patient special eyeglasses that allow him to look beyond his feet and see the tunnel opening. Other glasses use mirrors to direct the patient's vision out the back of the unit to large wilderness photographs or murals that simulate a sense of spaciousness. Even a basic item like a set of headphones that plays music can often distract a patient, and technicians frequently hold a patient's hand or foot during the procedure. Another trick is to invite family members and friends to remain with the patient during the scan to provide company and reassurance.

  8. Substrate denaturation and translocation by a proteolytic machine

    E-Print Network [OSTI]

    Kenniston, Jon Anders

    2005-01-01T23:59:59.000Z

    Many AAA+ molecular machines generate power and drive cellular processes by harnessing energy from cycles of ATP hydrolysis. ClpX is a relatively simple AAA+ ATPase that powers regulated protein degradation by binding ...

  9. CSC 4510 Machine Learning Dr. Mary-Angela Papalaskari

    E-Print Network [OSTI]

    Papalaskari, Mary-Angela

    definition of machine learning · Discussion of Alan Turing article: "Computing Machinery and Intelligence" http://loebner.net/Prizef/TuringArticle.html · See also: · Alan Turing website maintained by Andrew

  10. A tree-to-tree model for statistical machine translation

    E-Print Network [OSTI]

    Cowan, Brooke A. (Brooke Alissa), 1972-

    2008-01-01T23:59:59.000Z

    In this thesis, we take a statistical tree-to-tree approach to solving the problem of machine translation (MT). In a statistical tree-to-tree approach, first the source-language input is parsed into a syntactic tree ...

  11. Three-dimensionally printed biological machines powered by skeletal muscle

    E-Print Network [OSTI]

    Chan, Vincent

    Combining biological components, such as cells and tissues, with soft robotics can enable the fabrication of biological machines with the ability to sense, process signals, and produce force. An intuitive demonstration of ...

  12. Strategies for control of neuroprostheses through Brain-Machine Interfaces

    E-Print Network [OSTI]

    Kim, Hyun K., Ph. D. Massachusetts Institute of Technology

    2005-01-01T23:59:59.000Z

    The concept of brain controlled machines sparks our imagination with many exciting possibilities. One potential application is in neuroprostheses for paralyzed patients or amputees. The quality of life of those who have ...

  13. A Typed Calculus Supporting Shallow Embeddings of Abstract Machines

    E-Print Network [OSTI]

    Ariola, Zena M.

    . We believe that by doing so we shed light on some essential characteristics of abstract machines in a CPS interpreter. A defunctionalized continuation is actually just a data structure representing

  14. Performance analysis of synchronous machines under dynamic eccentricity

    E-Print Network [OSTI]

    Al-Nuaim, Nabil Abdulaziz

    1996-01-01T23:59:59.000Z

    The performance of salient pole synchronous machines under eccentric rotors is studied. Relationships between stator and rotor current induced harmonics and dynamic eccentricity are investigated. The winding function theory has been modified...

  15. State machine analysis of sensor data from dynamic processes

    DOE Patents [OSTI]

    Cook, William R.; Brabson, John M.; Deland, Sharon M.

    2003-12-23T23:59:59.000Z

    A state machine model analyzes sensor data from dynamic processes at a facility to identify the actual processes that were performed at the facility during a period of interest for the purpose of remote facility inspection. An inspector can further input the expected operations into the state machine model and compare the expected, or declared, processes to the actual processes to identify undeclared processes at the facility. The state machine analysis enables the generation of knowledge about the state of the facility at all levels, from location of physical objects to complex operational concepts. Therefore, the state machine method and apparatus may benefit any agency or business with sensored facilities that stores or manipulates expensive, dangerous, or controlled materials or information.

  16. A singularity-free WEC-respecting time machine

    E-Print Network [OSTI]

    S. V. Krasnikov

    1998-03-09T23:59:59.000Z

    A time machine (TM) is constructed whose creating in contrast to all TMs known so far requires neither singularities, nor violation of the weak energy condition (WEC). The spacetime exterior to the TM closely resembles the Friedmann universe.

  17. A high-speed hysteresis motor spindle for machining applications

    E-Print Network [OSTI]

    Bayless, Jacob D. (Jacob Daniel)

    2014-01-01T23:59:59.000Z

    An analysis of suitable drive technologies for use in a new high-speed machining spindle was performed to determine critical research areas. The focus is on a hysteresis motor topology using a solid, inherently-balanced ...

  18. Rotary-linear axes for high speed machining

    E-Print Network [OSTI]

    Liebman, Michael Kevin, 1974-

    2001-01-01T23:59:59.000Z

    This thesis presents the design, analysis, fabrication, and control of a rotary-linear axis; this axis is a key subsystem for high speed, 5-axis machine tools intended for fabricating centimeter-scale parts. The rotary-linear ...

  19. Machine Learning for the New York City Power Grid

    E-Print Network [OSTI]

    Rudin, Cynthia

    Power companies can benefit from the use of knowledge discovery methods and statistical machine learning for preventive maintenance. We introduce a general process for transforming historical electrical grid data into ...

  20. Development of magnetic induction machines for micro turbo machinery

    E-Print Network [OSTI]

    KöÅŸ er, Hür, 1976-

    2002-01-01T23:59:59.000Z

    This thesis presents the nonlinear analysis, design, fabrication, and testing of an axial-gap magnetic induction micro machine, which is a two-phase planar motor in which the rotor is suspended above the stator via mechanical ...

  1. Argonne scientists use bacteria to power simple machines | Argonne...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    use bacteria to power simple machines December 16, 2009 Tweet EmailPrint ARGONNE, Ill. - Scientists at the U.S. Department of Energy's (DOE) Argonne National Laboratory and...

  2. Human-Machine Interface in Building Automation Systems

    E-Print Network [OSTI]

    Sobczak, N. L.

    1981-01-01T23:59:59.000Z

    problem between the non-computer knowledgeable operator and the computer based Building Automation System. One of the solutions to this problem is the design and implementation of a human machine interface which educates the operator to utilize the system...

  3. I. Introduction Equivalent loading of induction machines are

    E-Print Network [OSTI]

    Szabados, Barna

    described, the rotor is used as an energy storing device, equivalent to a flywheel. The energy stored depends upon speed and moment of inertia of the machine. The speed response capacity of this "flywheel

  4. A doubly-fed machine for propulsion applications

    E-Print Network [OSTI]

    Tomovich, Michael S. (Michael Stephen)

    2014-01-01T23:59:59.000Z

    A doubly fed machine for propulsion applications is proposed, which, given the presence of AC and DC power sources, can be utilized in order to improve efficiency, weight, volume, and sizing of the rotor power electronics. ...

  5. A machine learning approach to crystal structure prediction

    E-Print Network [OSTI]

    Fischer, Christopher Carl

    2007-01-01T23:59:59.000Z

    This thesis develops a machine learning framework for predicting crystal structure and applies it to binary metallic alloys. As computational materials science turns a promising eye towards design, routine encounters with ...

  6. Compaction characteristics of crushed limestone using the Gyratory Testing Machine

    E-Print Network [OSTI]

    Parsons, Walter Herbert, III

    1963-01-01T23:59:59.000Z

    adjustments; screw T for fine adjustments. Tighten lock nuts for S and T after the adjustment is made. Load a sample into the machine at the desired vertical pressure. 4. Press start button U, which will cause roller carriage AA to revolve. 5. After a... OP PREVIOUS RESEARCH III. THE GYRATORY TESTING MACHINE Development Description Operation Operating Instructions IV. THE RESEARCH PROGRAM Material and Sample Preparation PAGE 1. 5 19 Development of the Texas Highway Department Moisture...

  7. Calculation of Unbalanced Magnetic Pull in Cage Induction Machines

    E-Print Network [OSTI]

    Dorrell, David George

    1993-10-26T23:59:59.000Z

    of alignment. This is called unbalanced magnetic pull. The consequences of this are numerous: excessive bearing wear; vibration; noise and, under extreme . conditions, contact between the rotor and stator. Assuming that the inner stator surface and outer... -salient machines. Summers in 1955 [7] began to develop the theory of UMP by using rotating field components in a two-pole machine, concluding that static UMP due to motor defor­ mations produce twice-line-frequency vibrations, dynamic UMP due to rotor irreg...

  8. Singing to the Machine: Rodolfo Garcia's Autobiographical Report

    E-Print Network [OSTI]

    Haney, Peter C.

    1998-01-01T23:59:59.000Z

    Singing to the Machine: Rodolfo García's Autobiographical Report* Peter C Haney University of Texas at Austin My paper examines an autobiographical monologue which Rodolfo García, an elderly Mexican American vaudevillian from San Antonio... giving seemingly full expression to his (her) self (1996:107). The song parodies re-collected in Mr. García's reporte were themselves the vehicles of memory, mental traces of the past which he was able to make material by singing into a machine. As I...

  9. Machine Vision Tests for Spent Fuel Scrap Characteristics

    SciTech Connect (OSTI)

    BERGER, W.W.

    2000-04-27T23:59:59.000Z

    The purpose of this work is to perform a feasibility test of a Machine Vision system for potential use at the Hanford K basins during spent nuclear fuel (SNF) operations. This report documents the testing performed to establish functionality of the system including quantitative assessment of results. Fauske and Associates, Inc., which has been intimately involved in development of the SNF safety basis, has teamed with Agris-Schoen Vision Systems, experts in robotics, tele-robotics, and Machine Vision, for this work.

  10. An alternative isolated wind electric pumping system using induction machines

    SciTech Connect (OSTI)

    Miranda, M.S.; Lyra, R.O.C.; Silva, S.R.

    1999-12-01T23:59:59.000Z

    An isolated variable speed variable frequency wind electric pumping system is proposed. Induction machines are used both in the generation unit as well as in the pumping unit and a static VAR compensator is used for providing the magnetizing currents of both machines. An indirect induction generator stator flux control strategy is adopted. System steady state and dynamic operation is studied basing on simulation and experimental results.

  11. Chapter 2: Machine Design, Fueling, and Heating in ASDEX Upgrade

    SciTech Connect (OSTI)

    Streibl, Bernhard; Lang, Peter Thomas; Leuterer, Fritz; Noterdaeme, Jean-Marie; Staebler, Albrecht [Max-Planck-Institut fuer Plasmaphysik (Germany)

    2003-11-15T23:59:59.000Z

    The machine design, power supply, and machine protection, as well as the different heating systems installed at ASDEX Upgrade are discussed. The available auxiliary heating power of 30 MW, supplied by three different heating systems, allows the power deposition to be varied and species heated over a large range. These three heating systems - neutral beam, ion cyclotron, and electron cyclotron heating - are presented in detail. A description of the pellet refueling system is included, which is successfully used for density control.

  12. Quantifying the Improvements in Rapid Prototyping and Product Life Cycle Performance Created by Machining

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    improve manufacturing. Keywords: Machining, Laser ablation,manufacturing technology. The first project compared micromilling to laser

  13. 14 May 1985 at 13:06 PPP machine support for language extensions

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    14 May 1985 at 13:06 PPP machine support for language extensions David Middleton Bruee T. Smith ... t1 86-012 1 #12;PPP machine 111pport for laDguage extenalona David Middleton Bruee Smith Unlvenlty to the hardware design. 1. Partitioning the PPP machine The FFP machine consists of a linear array of processors

  14. Numerical simulations of welds of thick steel pieces of interest for the thermonuclear fusion ITER machine

    E-Print Network [OSTI]

    Carmignani, B

    2005-01-01T23:59:59.000Z

    Numerical simulations of welds of thick steel pieces of interest for the thermonuclear fusion ITER machine

  15. Single-machine scheduling with periodic and exible periodic maintenance to minimize maximum tardiness

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    periods often appear in industry due to a machine breakdown (stochastic) or preventive maintenance of machine unavailability. However, in some cases (e.g. preventive maintenance), the maintenance of a machineSingle-machine scheduling with periodic and exible periodic maintenance to minimize maximum

  16. Cancellation of TorqueRipple Due to Nonidealitiesof PermanentMagnet SynchronousMachine Drives

    E-Print Network [OSTI]

    Chapman, Patrick

    -magnet synchronous application than the predecessors. Further, the technique is machine (PMSM) drives dictates

  17. Ultrashort pulse laser machining of metals and alloys

    DOE Patents [OSTI]

    Perry, Michael D.; Stuart, Brent C.

    2003-09-16T23:59:59.000Z

    The invention consists of a method for high precision machining (cutting, drilling, sculpting) of metals and alloys. By using pulses of a duration in the range of 10 femtoseconds to 100 picoseconds, extremely precise machining can be achieved with essentially no heat or shock affected zone. Because the pulses are so short, there is negligible thermal conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond approximately 0.1-1 micron (dependent upon the particular material) from the laser machined surface. Due to the short duration, the high intensity (>10.sup.12 W/cm.sup.2) associated with the interaction converts the material directly from the solid-state into an ionized plasma. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces with negligible redeposition either within the kerf or on the surface. Since there is negligible heating beyond the depth of material removed, the composition of the remaining material is unaffected by the laser machining process. This enables high precision machining of alloys and even pure metals with no change in grain structure.

  18. Homopolar machine for reversible energy storage and transfer systems

    DOE Patents [OSTI]

    Stillwagon, Roy E. (Ruffsdale, PA)

    1981-01-01T23:59:59.000Z

    A homopolar machine designed to operate as a generator and motor in reversibly storing and transferring energy between the machine and a magnetic load coil for a thermo-nuclear reactor. The machine rotor comprises hollow thin-walled cylinders or sleeves which form the basis of the system by utilizing substantially all of the rotor mass as a conductor thus making it possible to transfer substantially all the rotor kinetic energy electrically to the load coil in a highly economical and efficient manner. The rotor is divided into multiple separate cylinders or sleeves of modular design, connected in series and arranged to rotate in opposite directions but maintain the supply of current in a single direction to the machine terminals. A stator concentrically disposed around the sleeves consists of a hollow cylinder having a number of excitation coils each located radially outward from the ends of adjacent sleeves. Current collected at an end of each sleeve by sleeve slip rings and brushes is transferred through terminals to the magnetic load coil. Thereafter, electrical energy returned from the coil then flows through the machine which causes the sleeves to motor up to the desired speed in preparation for repetition of the cycle. To eliminate drag on the rotor between current pulses, the brush rigging is designed to lift brushes from all slip rings in the machine.

  19. Video: Activity Recognition on Mobile Phones Why do we need it and how can it be done?

    E-Print Network [OSTI]

    Beigl, Michael

    Video: Activity Recognition on Mobile Phones ­ Why do we need it and how can it be done? Matthias. Current models are equipped with a variety of sensors and enough processing power to make activ- ity have to be taken into account, ranging from flexibility over extensibility to energy efficiency

  20. Wegelerstrae 6 53115 Bonn Germany phone +49 228 73-3427 fax +49 228 73-7527

    E-Print Network [OSTI]

    Bartels, Soeren

    Wegelerstraÿe 6 53115 Bonn Germany phone +49 228 73-3427 fax +49 228 73-7527 www Simulation, Universität Bonn, 53115 Bonn, Germany; Correspond with chernov@hcm.uni-bonn.de #12;#12;Noname Simulation, University of Bonn Endenicher Allee 60, 53115 Bonn, Germany Tel.: +49-228-7362246 Fax: +49

  1. UCSC For-Sale Housing Questionnaire (2013-2014) Colleges, Housing and Educational Services (CHES) Phone: (831) 458-3506

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    UCSC For-Sale Housing Questionnaire (2013-2014) Colleges, Housing and Educational Services (CHES) Phone: (831) 458-3506 Faculty and Staff Housing Office Fax: (831) 458-1937 Hagar Court Community Room Email: facultyhousing@ucsc.edu Santa Cruz, CA 95064 Mailstop: Faculty Housing Rev. 7

  2. Mobile Phone Based Drunk Driving Detection Jiangpeng Dai, Jin Teng, Xiaole Bai, Zhaohui Shen and Dong Xuan

    E-Print Network [OSTI]

    Xuan, Dong

    Therapy Southeast University The Ohio State University The Ohio State University Nanjing, Jiangsu, China Columbus, Ohio, USA Columbus, Ohio, USA jpdai@seu.edu.cn {jpdai, tengj, baixia, xuan}@cse.ohio high accuracy and energy efficiency. Keywords--Drunk Driving Detection, Mobile Phones, Accelera- tion

  3. Figure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile phone

    E-Print Network [OSTI]

    Jacob, Robert J.K.

    Touch, is a vibrotactile device sleeve that fits over the back of a mobile phone. The basic concept is a handheld deviceFigure 1. ComTouch Concept drawing showing a handheld sleeve that fits onto the back of a mobile

  4. Smart Phone Users BEWARE!! The NYPD is reporting an increase in the theft of electronic devices from

    E-Print Network [OSTI]

    Papavasiliou, F. Nina

    Smart Phone Users BEWARE!! The NYPD is reporting an increase in the theft of electronic devices. Don't display it when not in use. Use a hands free device. · Change the color of your earphones from blocks and head for an area where people are or to the nearest open store. · Password protect your device

  5. Cool-Tether: Energy Efficient On-the-fly WiFi Hot-spots using Mobile Phones

    E-Print Network [OSTI]

    Belding-Royer, Elizabeth M.

    for their home computers, especially in the emerg- ing markets of the world. Even in developed countries where at home, at work, and on the move. In this context, we take advantage of two significant technology trends in the number of cellular subscribers, smart- phones are rapidly evolving into users' primary Internet ac- cess

  6. Integrated Mirco-Machined Hydrogen Gas Sensors

    SciTech Connect (OSTI)

    Frank DiMeoJr. Ing--shin Chen

    2005-12-15T23:59:59.000Z

    The widespread use of hydrogen as both an industrial process gas and an energy storage medium requires fast, selective detection of hydrogen gas. This report discusses the development of a new type of solid-state hydrogen gas sensor that couples novel metal hydride thin films with a MEMS (Micro-Electro-Mechanical System) structure known as a micro-hotplate. In this project, Micro-hotplate structures were overcoated with engineered multilayers that serve as the active hydrogen-sensing layer. The change in electrical resistance of these layers when exposed to hydrogen gas was the measured sensor output. This project focused on achieving the following objectives: (1) Demonstrating the capabilities of micro-machined H2 sensors; (2) Developing an understanding of their performance; (3) Critically evaluating the utility and viability of this technology for life safety and process monitoring applications. In order to efficiently achieve these objectives, the following four tasks were identified: (1) Sensor Design and Fabrication; (2) Short Term Response Testing; (3) Long Term Behavior Investigation; (4) Systems Development. Key findings in the project include: The demonstration of sub-second response times to hydrogen; measured sensitivity to hydrogen concentrations below 200 ppm; a dramatic improvement in the sensor fabrication process and increased understanding of the processing properties and performance relationships of the devices; the development of improved sensing multilayers; and the discovery of a novel strain based hydrogen detection mechanism. The results of this program suggest that this hydrogen sensor technology has exceptional potential to meet the stringent demands of life safety applications as hydrogen utilization and infrastructure becomes more prevalent.

  7. Johns Hopkins University Krieger Hall, Homewood Campus (410-516-5250/office phone) DEPARTMENT OF COGNITIVE SCIENCE

    E-Print Network [OSTI]

    Niebur, Ernst

    -Mellon University Machine Learning Department "Neural Representations of Word Meanings" How does the human brain addressing this question, in which we are applying machine learning algorithms to fMRI and MEG brain image for which we do not yet have brain image data. A third line of work involves examining neural activity

  8. The Citizen Cyberscience Lectures - 1) Mobile phones and Africa: a success story 2) Citizen Problem Solving

    SciTech Connect (OSTI)

    None

    2009-10-28T23:59:59.000Z

    Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive The Citizen Cyberscience Lectures are hosted by the partners of the Citizen Cyberscience Centre, CERN, The UN Institute of Training and Research and the University of Geneva. The goal of the Lectures is to provide an inspirational forum for participants from the various international organizations and academic institutions in Geneva to explore how information technology is enabling greater citizen participation in tackling global development challenges as well as global scientific research. The first Citizen Cyberscience Lectures will welcome two speakers who have both made major innovative contributions in this area. Dr. Mo Ibrahim, founder of Celtel International, one of Africa’s most successful mobile network operators, will talk about “Mobile phones and Africa: a success story”. Dr. Alpheus Bingham, founder of InnoCentive, a Web-based community that solves industrial R&D; challenges, will discuss “Citizen Problem Solving”. The Citizen Cyberscience Lectures are open and free of charge. Participants from outside CERN must register by sending an email to Yasemin.Hauser@cern.ch BEFORE the 23rd october to be able to access CERN. THE LECTURES Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Abstract The introduction of mobile phones into Africa changed the continent, enabling business and the commercial sector, creating directly and indirectly, millions of jobs. It enriched the social lives of many people. Surprisingly, it supported the emerging civil society and advanced the course of democracy Bio Dr Mo Ibrahim is a global expert in mobile communications with a distinguished academic and business career. In 1998, Dr Ibrahim founded Celtel International to build and operate mobile networks in Africa. Celtel became one of Africa’s most successful companies with operations in 15 countries, covering more than a third of the continent’s population and investing more than US$750 million in Africa. The company was sold to MTC Kuwait in 2005 for $3.4billion. In 2006 Dr Ibrahim established the Mo Ibrahim Foundation to support great African leadership. The Foundation focuses on two major initiatives to stimulate debate around, and improve the quality of, governance in Africa. The Ibrahim Prize for Achievement in African Leadership recognises and celebrates excellence; and the Ibrahim Index of African Governance provides civil society with a comprehensive and quantifiable tool to promote government accountability. Dr Ibrahim is also Founding Chairman of Satya Capital Ltd, an investment company focused on opportunities in Africa. Dr Ibrahim has been awarded an Honorary Doctorate by the University of London’s School of Oriental and African Studies, the University of Birmingham and De Montfort University, Leicester as well as an Honorary Fellowship Award from the London Business School. He has also received the Chairman’s Award for Lifetime Achievement from the GSM Association in 2007 and the Economists Innovation Award 2007 for Social & Economic Innovation. In 2008 Dr Ibrahim was presented with the BNP Paribas Prize for Philanthropy, and also listed by TIME magazine as one of the 100 most influential people in the world. Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive Abstract American playwright Damien Runyon (Guys and Dolls) once remarked, "the race is not always to the swift, nor the victory to the strong -- but that IS how you bet." Not only does a system of race handicapping follow from this logic, but the whole notion of expertise and technical qualifications. Such 'credentials' allow one to 'bet' on who might most likely solve a difficult challenge, whether as consultant, contractor or employee. Of course, the approach would differ if one were allowed to bet AFTER the race. When such systems came into broad use, i.e., chat rooms, usenets, innocentive, etc., and were subsequently studied, it was often found that the greate

  9. The Citizen Cyberscience Lectures - 1) Mobile phones and Africa: a success story 2) Citizen Problem Solving

    ScienceCinema (OSTI)

    None

    2011-10-06T23:59:59.000Z

    Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive The Citizen Cyberscience Lectures are hosted by the partners of the Citizen Cyberscience Centre, CERN, The UN Institute of Training and Research and the University of Geneva. The goal of the Lectures is to provide an inspirational forum for participants from the various international organizations and academic institutions in Geneva to explore how information technology is enabling greater citizen participation in tackling global development challenges as well as global scientific research. The first Citizen Cyberscience Lectures will welcome two speakers who have both made major innovative contributions in this area. Dr. Mo Ibrahim, founder of Celtel International, one of Africa?s most successful mobile network operators, will talk about ?Mobile phones and Africa: a success story?. Dr. Alpheus Bingham, founder of InnoCentive, a Web-based community that solves industrial R&D; challenges, will discuss ?Citizen Problem Solving?. The Citizen Cyberscience Lectures are open and free of charge. Participants from outside CERN must register by sending an email to Yasemin.Hauser@cern.ch BEFORE the 23rd october to be able to access CERN. THE LECTURES Mobile phones and Africa: a success story Dr. Mo Ibrahim, Mo Ibrahim Foundation Abstract The introduction of mobile phones into Africa changed the continent, enabling business and the commercial sector, creating directly and indirectly, millions of jobs. It enriched the social lives of many people. Surprisingly, it supported the emerging civil society and advanced the course of democracy Bio Dr Mo Ibrahim is a global expert in mobile communications with a distinguished academic and business career. In 1998, Dr Ibrahim founded Celtel International to build and operate mobile networks in Africa. Celtel became one of Africa?s most successful companies with operations in 15 countries, covering more than a third of the continent?s population and investing more than US$750 million in Africa. The company was sold to MTC Kuwait in 2005 for $3.4billion. In 2006 Dr Ibrahim established the Mo Ibrahim Foundation to support great African leadership. The Foundation focuses on two major initiatives to stimulate debate around, and improve the quality of, governance in Africa. The Ibrahim Prize for Achievement in African Leadership recognises and celebrates excellence; and the Ibrahim Index of African Governance provides civil society with a comprehensive and quantifiable tool to promote government accountability. Dr Ibrahim is also Founding Chairman of Satya Capital Ltd, an investment company focused on opportunities in Africa. Dr Ibrahim has been awarded an Honorary Doctorate by the University of London?s School of Oriental and African Studies, the University of Birmingham and De Montfort University, Leicester as well as an Honorary Fellowship Award from the London Business School. He has also received the Chairman?s Award for Lifetime Achievement from the GSM Association in 2007 and the Economists Innovation Award 2007 for Social & Economic Innovation. In 2008 Dr Ibrahim was presented with the BNP Paribas Prize for Philanthropy, and also listed by TIME magazine as one of the 100 most influential people in the world. Citizen Problem Solving Dr. Alpheus Bingham, InnoCentive Abstract American playwright Damien Runyon (Guys and Dolls) once remarked, "the race is not always to the swift, nor the victory to the strong -- but that IS how you bet." Not only does a system of race handicapping follow from this logic, but the whole notion of expertise and technical qualifications. Such 'credentials' allow one to 'bet' on who might most likely solve a difficult challenge, whether as consultant, contractor or employee. Of course, the approach would differ if one were allowed to bet AFTER the race. When such systems came into broad use, i.e., chat rooms, usenets, innocentive, etc., and were subsequently studied, it was often found that the greatest probability of solu

  10. Method and system for controlling a permanent magnet machine

    DOE Patents [OSTI]

    Walters, James E.

    2003-05-20T23:59:59.000Z

    Method and system for controlling the start of a permanent magnet machine are provided. The method allows to assign a parameter value indicative of an estimated initial rotor position of the machine. The method further allows to energize the machine with a level of current being sufficiently high to start rotor motion in a desired direction in the event the initial rotor position estimate is sufficiently close to the actual rotor position of the machine. A sensing action allows to sense whether any incremental changes in rotor position occur in response to the energizing action. In the event no changes in rotor position are sensed, the method allows to incrementally adjust the estimated rotor position by a first set of angular values until changes in rotor position are sensed. In the event changes in rotor position are sensed, the method allows to provide a rotor alignment signal as rotor motion continues. The alignment signal allows to align the estimated rotor position relative to the actual rotor position. This alignment action allows for operating the machine over a wide speed range.

  11. Stator-flux-based vector control of induction machines in magnetic saturation

    SciTech Connect (OSTI)

    Hofmann, H.; Sanders, S.R.; Sullivan, C. [Univ. of California, Berkeley, CA (United States). Dept. of Electrical Engineering and Computer Sciences

    1995-12-31T23:59:59.000Z

    In many variable-torque applications of induction machines it is desirable to operate the machine in magnetic saturation, thus allowing the machine to produce higher torques. Stator-flux-based control schemes have been developed as a possible alternative method of control of induction machines. Stator-flux-based control schemes need not depend on the magnetic characteristics of the machine, and hence are potentially more robust and easier to implement in magnetic saturation than rotor-flux-based control. The authors analyze the induction machine in saturation using a nonlinear {pi}-model of the machine`s magnetics, and develop a control scheme in the stator flux reference frame that is independent of magnetics. Experiments carried out on a 3 hp, 1,800 rpm wound rotor induction machine show smooth operation of the control scheme at torque levels up to at least 4 times rated torque.

  12. Development of precision machining and inspection technology for structural ceramics

    SciTech Connect (OSTI)

    Barkman, W.E.

    1997-03-06T23:59:59.000Z

    Finish machining operations contribute the majority of the costs associated with fabricating high quality ceramic products. These components are typically used in harsh environments such as diesel engines, the defense industry, and automotive applications. The required finishing operations involve a variety of technology areas including process controls, process analysis, product certification, etc. and are not limited only to component grinding methods. The broad range of manufacturing problem solving expertise available in Oak Ridge provided resources that were far beyond what is available to the Coors manufacturing sites. Coors contributed equipment, such as the computer controls and part handling mechanisms associated with a state-of-the-art inspection machine plus operation-specific experience base. In addition, addressing these challenging tasks enabled Oak Ridge personnel to maintain familarity with rapidly advancing technologies, such as those associated with machine vision equipment, process monitoring techniques, and computer control systems.

  13. Holographic Labeling And Reading Machine For Authentication And Security Appications

    DOE Patents [OSTI]

    Weber, David C. (Rancho Santa Margarita, CA); Trolinger, James D. (Costa Mesa, CA)

    1999-07-06T23:59:59.000Z

    A holographic security label and automated reading machine for marking and subsequently authenticating any object such as an identification badge, a pass, a ticket, a manufactured part, or a package is described. The security label is extremely difficult to copy or even to read by unauthorized persons. The system comprises a holographic security label that has been created with a coded reference wave, whose specification can be kept secret. The label contains information that can be extracted only with the coded reference wave, which is derived from a holographic key, which restricts access of the information to only the possessor of the key. A reading machine accesses the information contained in the label and compares it with data stored in the machine through the application of a joint transform correlator, which is also equipped with a reference hologram that adds additional security to the procedure.

  14. Method for producing hard-surfaced tools and machine components

    DOE Patents [OSTI]

    McHargue, C.J.

    1981-10-21T23:59:59.000Z

    In one aspect, the invention comprises a method for producing tools and machine components having superhard crystalline-ceramic work surfaces. Broadly, the method comprises two steps: a tool or machine component having a ceramic near-surface region is mounted in ion-implantation apparatus. The region then is implanted with metal ions to form, in the region, a metastable alloy of the ions and said ceramic. The region containing the alloy is characterized by a significant increase in hardness properties, such as microhardness, fracture-toughness, and/or scratch-resistance. The resulting improved article has good thermal stability at temperatures characteristic of typical tool and machine-component uses. The method is relatively simple and reproducible.

  15. Dynamic behavior analysis for a six axis industrial machining robot

    E-Print Network [OSTI]

    Bisu, Claudiu-Florinel; Gérard, Alain; K'Nevez, Jean-Yves

    2012-01-01T23:59:59.000Z

    The six axis robots are widely used in automotive industry for their good repeatability (as defined in the ISO92983) (painting, welding, mastic deposition, handling etc.). In the aerospace industry, robot starts to be used for complex applications such as drilling, riveting, fiber placement, NDT, etc. Given the positioning performance of serial robots, precision applications require usually external measurement device with complexes calibration procedure in order to reach the precision needed. New applications in the machining field of composite material (aerospace, naval, or wind turbine for example) intend to use off line programming of serial robot without the use of calibration or external measurement device. For those applications, the position, orientation and path trajectory precision of the tool center point of the robot are needed to generate the machining operation. This article presents the different conditions that currently limit the development of robots in robotic machining applications. We ana...

  16. High-precision micro/nano-scale machining system

    DOE Patents [OSTI]

    Kapoor, Shiv G.; Bourne, Keith Allen; DeVor, Richard E.

    2014-08-19T23:59:59.000Z

    A high precision micro/nanoscale machining system. A multi-axis movement machine provides relative movement along multiple axes between a workpiece and a tool holder. A cutting tool is disposed on a flexible cantilever held by the tool holder, the tool holder being movable to provide at least two of the axes to set the angle and distance of the cutting tool relative to the workpiece. A feedback control system uses measurement of deflection of the cantilever during cutting to maintain a desired cantilever deflection and hence a desired load on the cutting tool.

  17. 20140501-0531_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 May to 31 May 2014.

  18. 20140201-0228_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Feb to 28 Feb 2014.

  19. 20131201-1231_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Dec to 31 Dec 2013.

  20. 20140601-0630_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 June to 30 June 2014.

  1. 20131101-1130_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Nov to 30 Nov 2013.

  2. 20130801-0831_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 8/1/13 to 8/31/13.

  3. 20130501-20130531_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Vanderhoff, Alex

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from May 2013

  4. 20131001-1031_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 1 Oct 2013 to 31 Oct 2013.

  5. 20140701-0731_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 July to 31 July 2014.

  6. 20140301-0331_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Mar to 31 Mar 2014.

  7. 20140101-0131_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Jan to 31 Jan 2014.

  8. 20130901-0930_Green Machine Florida Canyon Hourly Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Thibedeau, Joe

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 1 September 2013 to 30 September 2013.

  9. Control coil arrangement for a rotating machine rotor

    DOE Patents [OSTI]

    Shah, Manoj R. (Latham, NY); Lewandowsk, Chad R. (Amsterdam, NY)

    2001-07-31T23:59:59.000Z

    A rotating machine (e.g., a turbine, motor or generator) is provided wherein a fixed solenoid or other coil configuration is disposed adjacent to one or both ends of the active portion of the machine rotor for producing an axially directed flux in the active portion so as to provide planar axial control at single or multiple locations for rotor balance, levitation, centering, torque and thrust action. Permanent magnets can be used to produce an axial bias magnetic field. The rotor can include magnetic disks disposed in opposed, facing relation to the coil configuration.

  10. Programmable phase plate for tool modification in laser machining applications

    DOE Patents [OSTI]

    Thompson Jr., Charles A.; Kartz, Michael W.; Brase, James M.; Pennington, Deanna; Perry, Michael D.

    2004-04-06T23:59:59.000Z

    A system for laser machining includes a laser source for propagating a laser beam toward a target location, and a spatial light modulator having individual controllable elements capable of modifying a phase profile of the laser beam to produce a corresponding irradiance pattern on the target location. The system also includes a controller operably connected to the spatial light modulator for controlling the individual controllable elements. By controlling the individual controllable elements, the phase profile of the laser beam may be modified into a desired phase profile so as to produce a corresponding desired irradiance pattern on the target location capable of performing a machining operation on the target location.

  11. 20131101-1130_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2013-12-02T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Nov to 30 Nov 2013.

  12. 20140501-0531_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-06-02T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 May to 31 May 2014.

  13. 20131001-1031_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2013-11-05T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 1 Oct 2013 to 31 Oct 2013.

  14. 20130901-0930_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2013-10-25T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 1 September 2013 to 30 September 2013.

  15. 20140101-0131_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-02-03T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Jan to 31 Jan 2014.

  16. 20140701-0731_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-07-31T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 July to 31 July 2014.

  17. 20140601-0630_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-06-30T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 June to 30 June 2014.

  18. 20130501-20130531_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Vanderhoff, Alex

    2013-06-18T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from May 2013

  19. 20131201-1231_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-01-08T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Dec to 31 Dec 2013.

  20. 20140201-0228_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-03-03T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Feb to 28 Feb 2014.

  1. 20130801-0831_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Vanderhoff, Alex

    2013-09-10T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 8/1/13 to 8/31/13.

  2. 20140301-0331_Green Machine Florida Canyon Hourly Data

    SciTech Connect (OSTI)

    Thibedeau, Joe

    2014-04-07T23:59:59.000Z

    Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 Mar to 31 Mar 2014.

  3. Protocol for secure quantum machine learning at a distant place

    E-Print Network [OSTI]

    Jeongho Bang; Seung-Woo Lee; Hyunseok Jeong

    2015-04-20T23:59:59.000Z

    The application of machine learning to quantum information processing has recently attracted keen interest, particularly for the optimization of control parameters in quantum tasks without any pre-programmed knowledge. By adapting the machine learning technique, we present a novel protocol in which an arbitrarily initialized device at a learner's location is taught by a provider located at a distant place. The protocol is designed such that any external learner who attempts to participate in or disrupt the learning process can be prohibited or noticed. We numerically demonstrate that our protocol works faithfully for single-qubit operation devices. A tradeoff between the inaccuracy and the learning time is also analyzed.

  4. Adaptive liquid crystal lens with large focal length tunability

    E-Print Network [OSTI]

    Wu, Shin-Tson

    applications in auto beam steering, mobile phone cameras, eyeglasses, and other machine visions. Various

  5. The artistry of construction: an investigation into construction as a creative process and the influence of mobile phones within domestic scale construction projects 

    E-Print Network [OSTI]

    McMeel, Dermott

    2009-01-01T23:59:59.000Z

    This Thesis seeks to analyse the influence that mobile phones exert on existing communication and working practices, and on the relationships of participants involved during on-site construction. The complexity of ...

  6. Social Security Administration Information Phone: (706) 542-2900 Fax: (706) 583-0123 Web: international.uga.edu Email: issis@uga.edu

    E-Print Network [OSTI]

    Hall, Daniel

    Social Security Administration Information Phone: (706) 542-2900 Fax: (706) 583-0123 Web and return, you will keep the same number. For additional information you may visit the Social Security with your new Social Security information. #12;

  7. 2011 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 1 of 5 Cisco Unified IP Phone 6945

    E-Print Network [OSTI]

    Moeller, Ralf

    -over-Ethernet (PoE) Class 1, which is the lowest-power consumption IP phone to save energy and support your green (Sweden) Serbian (Republic of Serbia and Republic of Montenegro) Slovenian (Slovenia) Thai (Thailand

  8. Recovery of lithium and cobalt from waste lithium ion batteries of mobile phone

    SciTech Connect (OSTI)

    Jha, Manis Kumar, E-mail: mkjha@nmlindia.org; Kumari, Anjan; Jha, Amrita Kumari; Kumar, Vinay; Hait, Jhumki; Pandey, Banshi Dhar

    2013-09-15T23:59:59.000Z

    Graphical abstract: Recovery of valuable metals from scrap batteries of mobile phone. - Highlights: • Recovery of Co and Li from spent LIBs was performed by hydrometallurgical route. • Under the optimum condition, 99.1% of lithium and 70.0% of cobalt were leached. • The mechanism of the dissolution of lithium and cobalt was studied. • Activation energy for lithium and cobalt were found to be 32.4 kJ/mol and 59.81 kJ/mol, respectively. • After metal recovery, residue was washed before disposal to the environment. - Abstract: In view of the stringent environmental regulations, availability of limited natural resources and ever increasing need of alternative energy critical elements, an environmental eco-friendly leaching process is reported for the recovery of lithium and cobalt from the cathode active materials of spent lithium-ion batteries of mobile phones. The experiments were carried out to optimize the process parameters for the recovery of lithium and cobalt by varying the concentration of leachant, pulp density, reductant volume and temperature. Leaching with 2 M sulfuric acid with the addition of 5% H{sub 2}O{sub 2} (v/v) at a pulp density of 100 g/L and 75 °C resulted in the recovery of 99.1% lithium and 70.0% cobalt in 60 min. H{sub 2}O{sub 2} in sulfuric acid solution acts as an effective reducing agent, which enhance the percentage leaching of metals. Leaching kinetics of lithium in sulfuric acid fitted well to the chemical controlled reaction model i.e. 1 ? (1 ? X){sup 1/3} = k{sub c}t. Leaching kinetics of cobalt fitted well to the model ‘ash diffusion control dense constant sizes spherical particles’ i.e. 1 ? 3(1 ? X){sup 2/3} + 2(1 ? X) = k{sub c}t. Metals could subsequently be separated selectively from the leach liquor by solvent extraction process to produce their salts by crystallization process from the purified solution.

  9. www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie Library

    E-Print Network [OSTI]

    www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie Library J. R. VAN PELT AND OPIE LIBRARY DIRECTORY & FLOOR MAPS FIRST FLOOR · CIRCULATION BOOK RETURN CHECKOUT COURSE Revision #6: 8-6-2009 #12;www.lib.mtu.edu | Phone: 906-487-2500 | Fax: 906-487-2357 J. R. Van Pelt and Opie

  10. Design and manufacturing of high precision roll-to-roll multi-layer printing machine : measurement and experiment

    E-Print Network [OSTI]

    Yang, Wenzhuo, M. Eng. Massachusetts Institute of Technology

    2009-01-01T23:59:59.000Z

    In 2008, a prototype machine demonstrating the application of roll-to-roll technology in micro-contact printing was developed. In this research, the prototype machine was upgraded by designing and machining a device that ...

  11. The addition of a calender machine to a pyrolytic graphite sheet production plant

    E-Print Network [OSTI]

    Svenson, Ernest Knute

    2014-01-01T23:59:59.000Z

    This thesis documents the process and challenges of adding a new calender machine to AvCarb Material Solutions' pyrolytic graphite production plant. Before the machine could be used for mass production, several experiments ...

  12. A two-phase spherical electric machine for generating rotating uniform magnetic fields

    E-Print Network [OSTI]

    Lawler, Clinton T. (Clinton Thomas)

    2007-01-01T23:59:59.000Z

    This thesis describes the design and construction of a novel two-phase spherical electric machine that generates rotating uniform magnetic fields, known as a fluxball machine. Alternative methods for producing uniform ...

  13. Machine Vision System Development for the Alps Product Y20 CCM Acknowledgements

    E-Print Network [OSTI]

    Whelan, Paul F.

    Machine Vision System Development for the Alps Product Y20 CCM 1 Acknowledgements I would like: ...................................................................... Date: .............................. #12;Machine Vision System Development for the Alps Product Y20 CCM

  14. Abstract --Our approach to laboratory education in power electronics and electric machines is presented. The approach

    E-Print Network [OSTI]

    Kimball, Jonathan W.

    1 Abstract --Our approach to laboratory education in power electronics and electric machines -- Power engineering education, education, en- ergy conversion, educational technology I. INTRODUCTION Power electronics and electric machines are largely appli- cation driven but draws from a broad

  15. Analysis of electromechanical interactions in a flywheel system with a doubly fed induction machine

    E-Print Network [OSTI]

    Ran, Li

    This paper analyzes the electromechanical inter-action in a flywheel system with a doubly fed induction machine, used for wind farm power smoothing or grid frequency response control. The grid-connected electrical machine ...

  16. Method and apparatus for characterizing and enhancing the dynamic performance of machine tools

    DOE Patents [OSTI]

    Barkman, William E; Babelay, Jr., Edwin F

    2013-12-17T23:59:59.000Z

    Disclosed are various systems and methods for assessing and improving the capability of a machine tool. The disclosure applies to machine tools having at least one slide configured to move along a motion axis. Various patterns of dynamic excitation commands are employed to drive the one or more slides, typically involving repetitive short distance displacements. A quantification of a measurable merit of machine tool response to the one or more patterns of dynamic excitation commands is typically derived for the machine tool. Examples of measurable merits of machine tool performance include dynamic one axis positional accuracy of the machine tool, dynamic cross-axis stability of the machine tool, and dynamic multi-axis positional accuracy of the machine tool.

  17. Re-Implementing a Machine Learning Program in Mercury Gregory D. Weber

    E-Print Network [OSTI]

    Weber, Gregory D.

    Re-Implementing a Machine Learning Program in Mercury Gregory D. Weber Computer Science Department. Motivation During the course of testing the machine learning pro- gram ICN (Weber 2003), it became clear

  18. A Foundation of Programming a Multi-Tape Quantum Turing machine

    E-Print Network [OSTI]

    Tomoyuki Yamakami

    1999-06-23T23:59:59.000Z

    The notion of quantum Turing machines is a basis of quantum complexity theory. We discuss a general model of multi-tape, multi-head Quantum Turing machines with multi final states that also allow tape heads to stay still.

  19. Interactions Between Wear Mechanisms in a WC-Co / Ti-6Al-4V Machining Tribosystem

    E-Print Network [OSTI]

    Bai, Qiong

    2014-12-11T23:59:59.000Z

    The objective of this research work is to identify and analyze the interactions between wear mechanisms in a machining tribosystem, and to confirm the fundamental physicochemical material interaction behavior through tribometric tests. The machining...

  20. Jack Case ? the man who helped bring uranium machining to Y...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the man who helped bring uranium machining to Y-12 Most of you realize that Y-12 is basically a huge and very precise machine shop. For years it has been the nation's only uranium...