Powered by Deep Web Technologies
Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

List of Vending Machine Controls Incentives | Open Energy Information  

Open Energy Info (EERE)

Controls Incentives Controls Incentives Jump to: navigation, search The following contains the list of 64 Vending Machine Controls Incentives. CSV (rows 1 - 64) Incentive Incentive Type Place Applicable Sector Eligible Technologies Active APS - Energy Efficiency Solutions for Business (Arizona) Utility Rebate Program Arizona Commercial Industrial Institutional Local Government Retail Supplier Schools State Government Building Insulation Central Air conditioners Chillers Comprehensive Measures/Whole Building Custom/Others pending approval Energy Mgmt. Systems/Building Controls Lighting Lighting Controls/Sensors Motor VFDs Motors Programmable Thermostats Refrigerators LED Exit Signs Evaporative Coolers Vending Machine Controls Food Service Equipment Yes Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Iowa) Utility Rebate Program Iowa Commercial

2

Talking Vending Machines  

E-Print Network [OSTI]

're in the central Tokyo Station and you're thirsty so you go to the, you know, vending machine to buy a drink. Only this is not your average vending machine. Uh uh. This vending machine has opinions on what beverage you want. Sensors built into large touch panels...

Hacker, Randi

2011-02-02T23:59:59.000Z

3

Covered Product Category: Refrigerated Beverage Vending Machines...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

vending machines are equipped with controls or software that put the lighting andor refrigeration systems into a low power state at night, on weekends, or other periods of...

4

Seattle City Light- Vending Machine Rebate Program  

Broader source: Energy.gov [DOE]

Seattle City Light offers qualifying customers $80 rebates for the purchase of VendingMiser Energy Efficient Vending Machines. VendingMiser reduces the energy consumption of cold drink vending...

5

Vending Machine Energy Consumption and VendingMiser Evaluation  

E-Print Network [OSTI]

As an effort to decrease the amount of non-critical energy used on the Texas A&M campus, and to assist Dixie Narco in evaluating the efficiency of their vending machines, the Texas A&M Energy Systems Laboratory investigated the power consumption...

Ritter, J.; Hugghins, J.

2000-01-01T23:59:59.000Z

6

New and Underutilized Technology: Vending Machine Occupancy Sensors |  

Broader source: Energy.gov (indexed) [DOE]

Vending Machine Occupancy Sensors Vending Machine Occupancy Sensors New and Underutilized Technology: Vending Machine Occupancy Sensors October 7, 2013 - 9:09am Addthis The following information outlines key deployment considerations for vending machine occupancy sensors within the Federal sector. Benefits Vending machine occupancy sensors detect when no people are in the vicinity and powers down beverage vending machines. These systems do not completely turn off compressor, but reduce their run times. Application Vending machine occupancy sensors are applicable in most building categories where vending machines are present. Key Factors for Deployment Occupancy sensors or similar features should be an integral part of new vending machine purchases. Ranking Criteria Federal energy savings, cost-effectiveness, and probability of success are

7

Covered Product Category: Refrigerated Beverage Vending Machines  

Broader source: Energy.gov [DOE]

FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including refrigerated beverage vending machines, which are covered by the ENERGY STAR® program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

8

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

Requirement for Vending Machines, version 2.0. ” AvailableScheme for Washing Machines. ” Available at: http://2007. “Final Report: Vending Machines Evaluation Standard

Fridley, David

2010-01-01T23:59:59.000Z

9

2014-08-01 Issuance: Energy Conservation Standard for Refrigerated Bottled or Canned Beverage Vending Machines; Notice of Public Meeting and Availability of the Preliminary Technical Support Document  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of public meeting and availability of the preliminary technical support document for refrigerated bottled or canned beverage vending machines, as issued by the Deputy Assistant Secretary for Energy Efficiency on August 1, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

10

2014-08-01 Issuance: Test Procedure for Refrigerated Bottled or Canned Beverage Vending Machines; Notice of Proposed Rulemaking and public meeting  

Broader source: Energy.gov [DOE]

This document is a pre-publication Federal Register notice of proposed rulemaking and public meeting regarding test procedures for refrigerated bottled or canned beverage vending machines, as issued by the Deputy Assistant Secretary for Energy Efficiency on August 1, 2014. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document.

11

DOE/EA-1674: Environmental Assessment for 10 CFR 431 Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines (August 2009)  

Broader source: Energy.gov (indexed) [DOE]

4 4 Environmental Assessment for 10 CFR 431 Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines August 2009 16-i CHAPTER 16. ENVIRONMENTAL IMPACT ANALYSIS TABLE OF CONTENTS 16.1 INTRODUCTION ............................................................................................................ 16-1 16.2 AIR EMISSIONS ANALYSIS......................................................................................... 16-1 16.2.1 Air Emissions Descriptions................................................................................ 16-1 16.2.2 Air Quality Regulation....................................................................................... 16-3 16.2.3 Analytical Methods for Air Emissions

12

E-Print Network 3.0 - automatic vending machine Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in 215 BC. That machine was used... to dispense holy water used in the temples of Egypt. Today, a drinking water ... Source: National Institute of Standards and Technology...

13

Beverage Vending Machines  

Broader source: Energy.gov [DOE]

The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR® verification, DOE rulemakings, and enforcement of the federal energy conservation standards.

14

Product Standards for Vending Equipment (Japan) | Open Energy Information  

Open Energy Info (EERE)

Product Standards for Vending Equipment (Japan) Product Standards for Vending Equipment (Japan) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Product Standards for Vending Equipment (Japan) Focus Area: Energy Efficiency Topics: Policy Impacts Website: www.eccj.or.jp/top_runner/pdf/tr_vending_machines_may2007.pdf Equivalent URI: cleanenergysolutions.org/content/product-standards-vending-equipment-j Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Industry Codes & Standards Regulations: Appliance & Equipment Standards and Required Labeling This Energy Conservation Center Japan (ECCJ) document was created as a guide in response to its newly established set of standards and labelling

15

Diamond turning machine controller implementation  

SciTech Connect (OSTI)

The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

1988-12-01T23:59:59.000Z

16

An intelligent CNC machine control system architecture  

SciTech Connect (OSTI)

Intelligent, agile manufacturing relies on automated programming of digitally controlled processes. Currently, processes such as Computer Numerically Controlled (CNC) machining are difficult to automate because of highly restrictive controllers and poor software environments. It is also difficult to utilize sensors and process models for adaptive control, or to integrate machining processes with other tasks within a factory floor setting. As part of a Laboratory Directed Research and Development (LDRD) program, a CNC machine control system architecture based on object-oriented design and graphical programming has been developed to address some of these problems and to demonstrate automated agile machining applications using platform-independent software.

Miller, D.J.; Loucks, C.S.

1996-10-01T23:59:59.000Z

17

Use of a Machine Control & Guidance System Determination of Performance  

E-Print Network [OSTI]

1 Use of a Machine Control & Guidance System Determination of Performance Protection against. Dr. P. Rausch Why Machine Guidance? 1 Introduction Machine Guidance allows higher performance. Higher someone checking down below: 09.07.2008 3 ,,Machine control by shout and gesture". Planned Excavator Job

18

Intelligent Vision-Based Computerized Numerically Controlled (CNC) Machine  

Science Journals Connector (OSTI)

In this article a system is developed to improve the performance of Computerized Numerically Controlled (CNC) machines by utilizing on-line vision based ... and control systems. Two different types of CNC machine...

Ghassan Al-Kindi; Hussien Zughaer

2012-01-01T23:59:59.000Z

19

International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with  

E-Print Network [OSTI]

1st International Conference on Machine Control & Guidance 2008 1 Automatic Guidance of Track Laying Machines with Respect to Coordinate Systems Th. ENGEL*, JJ. STUBY, Ch. GLAUSER, P. GĂ?LDENAPFEL machine guidance, this text focuses on presenting and solving three challenges without which coordinate

20

International Conference on Machine Control & Guidance 2008 1 Guidance for Partial Face Excavation Machines  

E-Print Network [OSTI]

1st International Conference on Machine Control & Guidance 2008 1 Guidance for Partial Face Excavation Machines Nod CLARKE-HACKSTON, Jochen BELZ VMT GmbH Allan HENNEKER Surex Pty Ltd Abstract information to the machine operator, VMT GmbH has developed a system to support precise excavation

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Mathematical modelling approach for determining optimal machining parameters in turning with computer numerical control (CNC) machines  

Science Journals Connector (OSTI)

Due to advancement in the manufacturing technology the application of computer numerical control (CNC) machines have increased manifolds. The determination of machining parameters for optimal results in machining is a part of computer aided process planning. In computer numerical control (CNC) machining, determining optimum or appropriate cutting parameters can minimise machining errors such as tool breakage, tool deflection and tool wear, thus yielding a high productivity or minimum cost. Different mathematical models have been proposed by various researchers in the past for the determination of optimal machining parameters. The present paper attempt's to review the literature regarding 'machining parameter optimisation' for turning operation in CNC machines. Diverse contributing and important factors in mathematical modelling like, the economic criteria's, single and multi-pass turning, optimisation techniques and practical constraints deployed have been considered. A detailed discussion is presented regarding the topic and in the end conclusions are drawn.

Bhaskar Naithani; Santram Chauhan

2012-01-01T23:59:59.000Z

22

Evaluating manufacturing machine control language standards: an implementer's view  

Science Journals Connector (OSTI)

The focus of this paper is: how can standards for manufacturing machine control languages be evaluated? What is required of a standard defining one of these languages so that implementations will interoperate? The paper provides a set of specific questions ... Keywords: AP 238, BCL, DMIS, EIA-274-D, ISO 10303, ISO 14649, STEP-NC, control, language, machine, standard

Thomas R. Kramer

2007-08-01T23:59:59.000Z

23

STATIC VAR COMPENSATOR CONTROL USING A QUANTIZED CONTROLLER FOR A TWO AREA MULTI-MACHINE SYSTEM  

E-Print Network [OSTI]

Compensators (SVC) control to enhance the damping of the power-swing. The test system used is a two area multiSTATIC VAR COMPENSATOR CONTROL USING A QUANTIZED CONTROLLER FOR A TWO AREA MULTI-MACHINE SYSTEM-machine system. A severe disturbance is introduced into the power system and the quantized controller controlled

Wilamowski, Bogdan Maciej

24

On learning machines for engine control Gerard Bloch1  

E-Print Network [OSTI]

the experimental costs (Sect. 3.3). 1.1 Common features in engine control The main function of the engine is to ensure the vehicle mobility by providing the power to the vehicle transmission. Nevertheless, the engineOn learning machines for engine control G´erard Bloch1 , Fabien Lauer1 , and Guillaume Colin2 1

Paris-Sud XI, Université de

25

Testing Programmable Logic Controllers from Finite State Machines specification  

E-Print Network [OSTI]

Testing Programmable Logic Controllers from Finite State Machines specification Julien Provost, on the basis of experiments, that execution of conformance tests of programmable logic controllers with minimum-length test sequences built from specifications in FSMs may yield spurious results. A new approach to build

Paris-Sud XI, Université de

26

International Conference on Machine Control & Guidance 2008 1 New Technologies for Telematics and Machine Control  

E-Print Network [OSTI]

systems, water accumulations were a persistent problem, thus voiding the effect the drainage was supposed to the blade of a machine, for example a motor grader. Icons or LEDs guide the motor grader operator while he

27

An advanced STEP-NC controller for intelligent machining processes  

Science Journals Connector (OSTI)

Major improvements in high speed machining technologies are not followed by suitable evolutions of the programming standard ISO 6983, also called G-code. New STEP-NC standard aims at performing high level intelligent NC programming adapted to modern ... Keywords: CNC Controller, Multiprocess manufacturing, Optimization, STEP-NC, Simulation

Matthieu Rauch; Raphael Laguionie; Jean-Yves Hascoet; Suk-Hwan Suh

2012-06-01T23:59:59.000Z

28

Machine Learning for Humanoid Robot Modeling and Control /  

E-Print Network [OSTI]

Face . . . . . . . . . . . 1.2 Machine Learning ApproachesInternational Conference on Machine Learning (ICML), 2011. [hands. ICRA 2013, 2013. [40] Machine Perception Laboratory.

Wu, Tingfan

2013-01-01T23:59:59.000Z

29

Simplified Modelling and Control of a Synchronous Machine with VariableSpeed SixStep Drive  

E-Print Network [OSTI]

of electrical power flow in the machine. Cost is a driving factor in the design of such a system, and the power frequency than PWM as well. II. VARIABLE­SPEED ELECTRIC MACHINE DRIVES While the choice of driveSimplified Modelling and Control of a Synchronous Machine with Variable­Speed Six­Step Drive

Sanders, Seth

30

Re ning Abstract Machine Speci cations of the Steam Boiler Control to Well Documented  

E-Print Network [OSTI]

Re ning Abstract Machine Speci cations of the Steam Boiler Control to Well Documented Executable the steam boiler control speci cation problem to il- lustrate how the evolving algebra approach to the speci, in June 1995, to control the Karlsruhe steam boiler simulator satisfactorily. The abstract machines

Börger, Egon

31

Scheduling Job Families on Non-Identical Parallel Machines under Run-To-Run Control Constraints  

E-Print Network [OSTI]

1 Scheduling Job Families on Non-Identical Parallel Machines under Run-To-Run Control Constraints A}@emse.fr Keywords: Scheduling, Parallel Machines, Advanced Process Control, Time Constraint, Integer Linear), Run to Run control (R2R), and more recently Virtual Metrology (VM). Scheduling and APC are usually

Paris-Sud XI, Université de

32

Method and system for controlling a synchronous machine over full operating range  

DOE Patents [OSTI]

System and method for controlling a synchronous machine are provided. The method allows for calculating a stator voltage index. The method further allows for relating the magnitude of the stator voltage index against a threshold voltage value. An offset signal is generated based on the results of the relating step. A respective state of operation of the machine is determined. The offset signal is processed based on the respective state of the machine.

Walters, James E. (Carmel, IN); Gunawan, Fani S. (Westfield, IN); Xue, Yanhong (Westfield, IN)

2002-01-01T23:59:59.000Z

33

Intelligent Control of the Linear Motor Direct Drive Feed System for CNC Machine Tools  

Science Journals Connector (OSTI)

The linear feed system directly driven by a linear motor is more and more widely used in high speed CNC machine tools. In this linear “direct drive” feed system, all mechanical transmission elements are eliminated. The linear motor’s ... Keywords: intelligent control, linear motor, direct drive, linear feed system, machine tool

Shuhong Xiao; Guangyuan Zheng; Shuquan Chen

2008-12-01T23:59:59.000Z

34

International Conference on Machine Control & Guidance 2008 1 The Kinematic Potential of Modern Tracking Total Stations  

E-Print Network [OSTI]

1st International Conference on Machine Control & Guidance 2008 1 The Kinematic Potential of Modern millimetres to be measured. Keywords Tracking Total Stations, GNSS, Telescope, new Platform, ATR, EDM, Leica the 3D movement traces of construction machines, ships or individual uses occurred. The kinematic manner

35

Formal Safety Analysis of the Control Program for a Radiation Therapy Machine  

Science Journals Connector (OSTI)

A central problem in software development is to assure that a complex program actually meets its requirements. This problem is most urgent in applications such as the control of radiation therapy machines, whe...

Jonathan Jacky

2000-01-01T23:59:59.000Z

36

Review: Avgust Pavel: Prekmurska Slovenska Slovnica. Vend Nyelvtan  

E-Print Network [OSTI]

— #28;#24; — 2FHQH#15;#3;]DSLVNL#15;#3;SRURţLOD#3;±#3;5HYLHZV#15;#3;1RWHV#15;#3;5HSRUWV $9*867#3;3$9(/#29; PREKMURSKA SLOVENSKA SLOVNICA. VEND NYELVTAN#17;#3;0DULERU#29;#3;)LOR]RIVND#3;ID-­ NXOWHWD#15;#3;0HGQDURGQD#3;]DORĺED#3;2GGHOND#3; ]D...#3;VORYDQVNH#3;MH]LNH#3;LQ#3;NQMLĺHYQRVWL#3; #11;=RUD#30;#3;#20;#19;#19;#12;#17;#3;#23;#26;#23;#3;VWU#17; .RQHF#3;OHWD#3;#21;#19;#20;#22;#3;MH#3;Y#3;PHGQDURGQL#3;NQML-­ ĺQL#3; ]ELUNL#3; =RUD#3; #11;=RUD#3; #20;#19;#19;#15;#3; XUHGQLN#3; 0DUNR#3...

Šek Mertü k, Polonca

2014-06-25T23:59:59.000Z

37

Direct control of air gap flux in permanent magnet machines  

DOE Patents [OSTI]

A method and apparatus for field weakening in PM machines uses field weakening coils (35, 44, 45, 71, 72) to produce flux in one or more stators (34, 49, 63, 64), including a flux which counters flux normally produced in air gaps between the stator(s) (34, 49, 63, 64) and the rotor (20, 21, 41, 61) which carries the PM poles. Several modes of operation are introduced depending on the magnitude and polarity of current in the field weakening coils (35, 44, 45, 71, 72). The invention is particularly useful for, but not limited to, the electric vehicle drives and PM generators.

Hsu, John S. (Oak Ridge, TN)

2000-01-01T23:59:59.000Z

38

Pointright: a system to redirect mouse and keyboard control among multiple machines  

DOE Patents [OSTI]

The present invention provides a software system, PointRight, that allows for smooth and effortless control of pointing and input devices among multiple displays. With PointRight, a single free-floating mouse and keyboard can be used to control multiple screens. When the cursor reaches the edge of a screen it seamlessly moves to the adjacent screen and keyboard control is simultaneously redirected to the appropriate machine. Laptops may also redirect their keyboard and pointing device, and multiple pointers are supported simultaneously. The system automatically reconfigures itself as displays go on, go off, or change the machine they display.

Johanson, Bradley E. (Palo Alto, CA); Winograd, Terry A. (Stanford, CA); Hutchins, Gregory M. (Mountain View, CA)

2008-09-30T23:59:59.000Z

39

Identification of intermittent control in man and machine  

Science Journals Connector (OSTI)

...load output can be mechanical, haptic, audio or vestibular, and the target mechanical, haptic or audio. Thus, non-visual control can be investigated...control systems: I. The operator as an engineering system. Br. J. Psychol. xxxviii...

2012-01-01T23:59:59.000Z

40

Adaptive vibration control using synchronous demodulation with machine tool controller motor commutation  

DOE Patents [OSTI]

A control system and method for actively reducing vibration in a spindle housing caused by unbalance forces on a rotating spindle, by measuring the force-induced spindle-housing motion, determining control signals based on synchronous demodulation, and provide compensation for the measured displacement to cancel or otherwise reduce or attenuate the vibration. In particular, the synchronous demodulation technique is performed to recover a measured spindle housing displacement signal related only to the rotation of a machine tool spindle, and consequently rejects measured displacement not related to spindle motion or synchronous to a cycle of revolution. Furthermore, the controller actuates at least one voice-coil (VC) motor, to cancel the original force-induced motion, and adapts the magnitude of voice coil signal until this measured displacement signal is brought to a null. In order to adjust the signal to a null, it must have the correct phase relative to the spindle angle. The feedback phase signal is used to adjust a common (to both outputs) commutation offset register (offset relative to spindle encoder angle) to force the feedback phase signal output to a null. Once both of these feedback signals are null, the system is compensating properly for the spindle-induced motion.

Hopkins, David James (Livermore, CA)

2008-05-13T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Identification of intermittent control in man and machine  

Science Journals Connector (OSTI)

...human muscle generating force from neural drive. To...pitch, maintaining a force or pressure. When load...Theories of attention. In Handbook of perception and action...control of continuous force production. J. Neurophysiol...negative feedback is fundamental to engineering and biological...

2012-01-01T23:59:59.000Z

42

Investigation on multi-variable decoupled temperature control system for enamelling machine with heated air circulation  

SciTech Connect (OSTI)

A lots of problems may occur frequently when controlling the temperature of the enamelling machine oven in the real industrial process, such as multi-variable coupled problem. an experimental rig with triple inputs and triple outputs was devised and a simulation modeling was established accordingly in this study,. the temperature control system based on the feedforward compensation algorithm was proposed. Experimental results have shown that the system is of high efficiency, good stability and promising application.

Li, Yang; Qin, Le; Zou, Shipeng; Long, Shijun [School of Information Engineering, Guangdong University of Technology, Guangzhou, 510006 (China)

2014-04-11T23:59:59.000Z

43

Methods, systems and apparatus for controlling third harmonic voltage when operating a multi-space machine in an overmodulation region  

SciTech Connect (OSTI)

Methods, system and apparatus are provided for controlling third harmonic voltages when operating a multi-phase machine in an overmodulation region. The multi-phase machine can be, for example, a five-phase machine in a vector controlled motor drive system that includes a five-phase PWM controlled inverter module that drives the five-phase machine. Techniques for overmodulating a reference voltage vector are provided. For example, when the reference voltage vector is determined to be within the overmodulation region, an angle of the reference voltage vector can be modified to generate a reference voltage overmodulation control angle, and a magnitude of the reference voltage vector can be modified, based on the reference voltage overmodulation control angle, to generate a modified magnitude of the reference voltage vector. By modifying the reference voltage vector, voltage command signals that control a five-phase inverter module can be optimized to increase output voltages generated by the five-phase inverter module.

Perisic, Milun; Kinoshita, Michael H; Ranson, Ray M; Gallegos-Lopez, Gabriel

2014-06-03T23:59:59.000Z

44

Feedrate scheduling and jerk control algorithm for high-speed CNC machining  

Science Journals Connector (OSTI)

High-speed CNC machining usually slows down around corners and vibrates so much because of limits on processing large amount of consecutive small line blocks with high speed and inability changing directions fast enough. Aiming at adjusting the feedrate automatically and providing smoother acceleration to achieve maximum productivity, this research presents a feedrate scheduling and jerk control interpolation algorithm to seek the optimal feedrate by evaluating the tool path ahead. After generating a smooth path within error allowance by B-spline fitting algorithm, we calculate the safe, highest, continuous linear velocity while simultaneously accommodating the machine's Acceleration/Deceleration (Acc/Dec) limits. Smooth jerk motion is obtained by modulating the acceleration profiles along the tool path. A look-ahead interpolation scheme is also presented for the purpose of fast controls. Simulation results indicate that the proposed adaptive algorithm speeds feedrates, limits distortion to the programmed path, maintains high speed without sacrificing accuracy while going around corners.

Daping Wan; ShiLong Wang; CaiChao Zhu; Fanming Meng

2009-01-01T23:59:59.000Z

45

REFRIGERATED BEVERAGE VENDING MACHINE OUTDOOR LOCATION AND ELEVATED (90 F) OUTDOOR TEMPERATURE ANALYSIS  

E-Print Network [OSTI]

Total BVM ACE PEPSI ACE LSIC ACE PEPSI ACE PEPSI ACE COKEAHG COKE AHG PEPSI ARCFLOOR BASEMENT-REAR ART COKE UTX ART 2 FL PEPSI ART 2 FL

Wei, Max

2014-01-01T23:59:59.000Z

46

Control of Two Permanent Magnet Machines Using a Five-Leg Inverter for Automotive Applications  

SciTech Connect (OSTI)

This paper presents digital control schemes for control of two permanent magnet (PM) machines in an integrated traction and air-conditioning compressor drive system for automotive applications. The integrated drive system employs a five-leg inverter to power a three-phase traction PM motor and a two-phase compressor PM motor by tying the common terminal of the two-phase motor to the neutral point of the three-phase motor. Compared to a three-phase or a standalone two-phase inverter, it eliminates one phase leg and shares the control electronics between the two drives, thus significantly reducing the component count of the compressor drive. To demonstrate that the speed and torque of the two PM motors can be controlled independently, a control strategy was implemented in a digital signal processor, which includes a rotor flux field orientation based control (RFOC) for the three-phase motor, a similar RFOC and a position sensorless control in the brushless dc (BLDC) mode for the two-phase motor. Control implementation issues unique to a two-phase PM motor are also discussed. Test results with the three-phase motor running in the ac synchronous (ACS) mode while the two-phase motor either in the ACS or the BLDC mode are included to verify the independent speed and torque control capability of the integrated drive.

Su, Gui-Jia [ORNL; Tang, Lixin [ORNL; Huang, Xianghui [GE Global Research

2006-01-01T23:59:59.000Z

47

Vehicle Technologies Office: Electrical Machines  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Electrical Machines to Electrical Machines to someone by E-mail Share Vehicle Technologies Office: Electrical Machines on Facebook Tweet about Vehicle Technologies Office: Electrical Machines on Twitter Bookmark Vehicle Technologies Office: Electrical Machines on Google Bookmark Vehicle Technologies Office: Electrical Machines on Delicious Rank Vehicle Technologies Office: Electrical Machines on Digg Find More places to share Vehicle Technologies Office: Electrical Machines on AddThis.com... Just the Basics Hybrid & Vehicle Systems Energy Storage Advanced Power Electronics & Electrical Machines Power Electronics Electrical Machines Thermal Control & System Integration Advanced Combustion Engines Fuels & Lubricants Materials Technologies Electrical Machines Emphasis in the electrical machines activity is on advanced motor

48

Roadmap for Research, Development, and Demonstration of Instrumentation, Controls, and Human-Machine Interface Technologies  

SciTech Connect (OSTI)

Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by a number of concerns. Although international implementation of evolutionary nuclear power plants and the progression toward new plants in the United States have spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, design and development programs by the U.S. Department of Energy (DOE) for advanced reactor concepts, such as the Generation IV Program and Next Generation Nuclear Plant (NGNP), introduce different plant conditions and unique plant configurations that increase the need for enhanced ICHMI capabilities to fully achieve programmatic goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, there are challenges that need to be addressed to enable the nuclear power industry to effectively and efficiently complete the transition to safe and comprehensive use of digital technology.

Miller, Don W.; Arndt, Steven A.; Bond, Leonard J.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

2008-06-01T23:59:59.000Z

49

International Conference on Machine Control & Guidance 2008 1 Self-configuring, Mobile Networks in the Area of  

E-Print Network [OSTI]

by a micro controller (PAN = private area network). Based on the wireless standard of ZigBee, the network1st International Conference on Machine Control & Guidance 2008 1 Self-configuring, Mobile Networks is able to independently establish networks even across huge distances, via multi-hopping. The modules act

50

A power control strategy for flywheel doubly-fed induction machine storage system using artificial neural network  

Science Journals Connector (OSTI)

A large-capacity low-speed flywheel energy storage system (FESS) based on a doubly-fed induction machine (DFIM) consists of a wound-rotor induction machine and a back-to-back converter rated at 30–35% of the machine power rating used for rotor excitation. This system has been promoted as a viable mean of energy storage for power system applications as grid frequency support/control, uninterruptible power supply (UPS), power conditioning, and voltage sag mitigation. This paper presents a simple power control strategy based on artificial neural networks (ANN) to charge/discharge a flywheel DFIM (FW-DFIM) storage system while maintaining controllable grid side power. The proposed controller is based on conventional vector control system supplemented by an ANN-based current decoupling network used to develop the required rotor current components based on the required grid power level and flywheel instantaneous speed. The controller is designed to avoid overloading both stator and rotor circuits while the flywheel is charged/discharged. Additionally, it avoids using the required outer power loop or a hysteresis power controller, hence, simplifies the overall control algorithm. The validity of the developed concept along with the effectiveness and viability of the control strategy in power system applications is confirmed by computer simulation using Matlab/Simulink for a medium voltage 1000hp FW-DFIM. The simulation study is carried out for uninterruptible power supply (UPS) applications and power leveling to improve the quality of electric power delivered by wind generators.

A. Abdel-Khalik; A. Elserougi; A. Massoud; S. Ahmed

2013-01-01T23:59:59.000Z

51

On-machine 3D vision system for machining setup modeling  

E-Print Network [OSTI]

3 ORIGINAL ARTICLE On-machine 3D vision system for machiningIn computer numerical control machine tools, using machiningIn this paper, an on-machine vision system is presented to

Zhang, Xi; Tian, Xiaodong; Yamazaki, Kazuo

2010-01-01T23:59:59.000Z

52

Heat-machine control by quantum-state preparation: from quantum engines to refrigerators  

E-Print Network [OSTI]

We explore the dependence of the performance bounds of heat engines and refrigerators on the initial quantum state and the subsequent evolution of their piston, modeled by a quantized harmonic oscillator. Our goal is to provide a fully quantized treatment of self-contained (autonomous) heat machines, as opposed to their prevailing semiclassical description that consists of a quantum system alternately coupled to a hot or a cold heat bath, and parametrically driven by a classical time-dependent piston or field. Here by contrast, there is no external time-dependent driving. Instead, the evolution is caused by the stationary simultaneous interaction of two heat baths (having distinct spectra and temperatures) with a single two-level system that is in turn coupled to the quantum piston. The fully quantized treatment we put forward allows us to investigate work extraction and refrigeration by the tools of quantum-optical amplifier and dissipation theory, particularly, by the analysis of amplified or dissipated phase-plane quasiprobability distributions. Our main insight is that quantum states may be thermodynamic resources and can provide a powerful handle, or control, on the efficiency of the heat machine. In particular, a piston initialized in a coherent state can cause the engine to produce work at an efficiency above the Carnot bound in the linear amplification regime. In the refrigeration regime, the coefficient of performance can transgress the Carnot bound if the piston is initialized in a Fock state. The piston may be realized by a vibrational mode, as in nanomechanical setups, or an electromagnetic field mode, as in cavity-based scenarios.

David Gelbwaser-Klimovsky; Gershon Kurizki

2015-01-31T23:59:59.000Z

53

A control system for integrating precision polishing system and CNC machine tool.  

E-Print Network [OSTI]

??The main goal of this thesis is to propose a strategy which can integrate the precision hydrodynamic polishing system with an ordinary CNC machine tool.… (more)

Gu, Wen-yi

2010-01-01T23:59:59.000Z

54

Universal Developer Platform for MachinePlatform for Machine  

E-Print Network [OSTI]

1 Universal Developer Platform for MachinePlatform for Machine Control Applications Hansjoerg will need some things: · Senses · Means June 24-26, 2008 ETH Zurich #12;2 And for Machine Control? June 24 ETH Zurich Conclusion: big effort for things that have little to do with Machine Control Multi

55

--No Title--  

Broader source: Energy.gov (indexed) [DOE]

Rev. 1 adds the following to the scope of this EEC: Add a sheltered vending machines area, as well as, sidewalks and established erosion control runoff features required...

56

CNC MACHINE TOOL  

Science Journals Connector (OSTI)

machines are controlled by locally programmable, dedicated micro- or mini-computers. Computer programs resident in the memory of the computer guide the machine tool to cut or form metal to conform to the de...

2000-01-01T23:59:59.000Z

57

Instrumentation, Controls, and Human-Machine Interface Technology Development Roadmap in Support of Grid Appropriate Reactors  

SciTech Connect (OSTI)

Grid Appropriate Reactors (GARs) are a component of the U.S. Department of Energy s (DOE s) Global Nuclear Energy Partnership (GNEP) program. GARs have smaller output power (<~600 MWe), than those intended for deployment on large, tightly coupled grids. This smaller size is important in avoiding grid destabilization, which can result from having a large fraction of a grid s electrical generation supplied by a single source. GARs are envisioned to be deployed worldwide often in locations without extensive nuclear power experience. DOE recently sponsored the creation of an Instrumentation, Controls, and Human-Machine Interface (ICHMI) technology development roadmap emphasizing the specific characteristics of GARs [1]. This roadmapping effort builds upon and focuses the recently developed, more general nuclear energy ICHMI technology development roadmap [2]. The combination of the smaller plant size, smaller grids, and deployment in locations without extensive prior nuclear power experience presents particular infrastructure, regulation, design, operational, and safeguards challenges for effective GAR deployment. ICHMI technologies are central to efficient GAR operation and as such are a dimension of each of these challenges. Further, while the particular ICHMI technologies to be developed would be useful at larger power plants, they are not high-priority development items at the larger plants. For example, grid transient resilience would be a useful feature for any reactor/grid combination and indeed would have limited some recent blackout events. However, most large reactors have limited passive cooling features. Large plants with active safety response features will likely preserve trip preferential grid transient response. This contrasts sharply with GARs featuring passive shutdown cooling, which can safely support grid stability during large grid transients. ICHMI technologies ranging from alternative control algorithms to simplified human-interface system designs are key to enabling GARs to respond properly and thereby stabilize the grid during transients.

Holcomb, David Eugene [ORNL] [ORNL; Upadhyaya, Belle R. [University of Tennessee, Knoxville (UTK)] [University of Tennessee, Knoxville (UTK); Kisner, Roger A [ORNL] [ORNL; O'Hara, John [Brookhaven National Laboratory (BNL)] [Brookhaven National Laboratory (BNL); Quinn, Edward L. [Longenecker & Associates] [Longenecker & Associates; Miller, Don W. [Ohio State University] [Ohio State University

2009-01-01T23:59:59.000Z

58

Research of Fine Control Technology About the Tire Rubber Production Line Auxiliary Machine  

Science Journals Connector (OSTI)

Smelting auxiliary machine is an equipment which provide rubber matrix for tire rubber production. This paper describes a technology which’s ... powder state materials weighing automatic device on tire rubber production

Jin Chen; Rong-rong Zhang; Mao-lin Ji…

2014-01-01T23:59:59.000Z

59

Harmonic control of multiple-stator induction machines for voltage regulation  

E-Print Network [OSTI]

Small, one to a few horsepower, three-phase induction machines with three sets of electrically-isolated, magnetically-coupled stator winding circuits are described. A voltage inverter is developed and used to drive one set ...

Holloway, Jack Wade, 1980-

2004-01-01T23:59:59.000Z

60

Millikelvin Lab Machine Shop  

E-Print Network [OSTI]

Millikelvin Lab OP105­112 Machine Shop OP132 Resistive Magnet Shop CICC Winding Area Transformers This building is home to the Millikelvin lab, the control room, the resistive magnet and machine shops, the CICC@magnet.fsu.edu (850) 644-4378 (850) 644-0534 2 MACHINE SHOP OP132 Vaughan Williams (A114*) williams

McQuade, D. Tyler

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Inverse kinematics for optimal tool orientation control in 5-axis CNC machining  

Science Journals Connector (OSTI)

Abstract The problem of determining the inputs to the rotary axes of a 5-axis CNC machine is addressed, such that relative variations of orientation between the tool axis and surface normal are minimized subject to the constraint of maintaining a constant cutting speed with a ball-end tool. In the context of an orientable-spindle machine, the results of a prior study are directly applicable to the solution of this inverse-kinematics problem. However, since they are expressed in terms of the integral of the geodesic curvature, a discrete time-step solution is proposed that yields accurate rotary-axis increments at high sampling frequencies. For an orientable-table machine, a closed-form solution that specifies the rotary-axis positions as functions of the surface normal variation along the toolpath is possible. In this context, however, the feasibility of a solution is dependent upon the surface normal along the toolpath satisfying certain orientational constraints. These inverse-kinematics solutions facilitate accurate and efficient 5-axis machining of free-form surfaces without “unnecessary” actuation of the machine rotary axes.

Rida T. Farouki; Chang Yong Han; Shiqiao Li

2014-01-01T23:59:59.000Z

62

Improvement of synchronous machine transient response by fast-acting phase-shift control  

Science Journals Connector (OSTI)

The transient response of a synchronous machine connected to a large system can be improved by the insertion of fast-acting phase shift. The concept is described in simple terms using the equal-area criterion and by computed results using a typical mathematical model. A strategy is then outlined to minimise the system disturbance.

A. El-Sersawi; D. O'Kelly

1981-01-01T23:59:59.000Z

63

International Conference on Machine Control & Guidance 2008 1 No Driving in Circles -Improving the Research and  

E-Print Network [OSTI]

Jochen WENDEBAUM*, Mats KJELLBERG CC Systems AB, Sweden Abstract The research and development of hardware the real work process, there are high restrictions concerning the access to the machine during work time, so this work has to be done in working breaks and before and after work, leading to an exhausting

64

A generalized on-line estimation and control of five-axis contouring errors of CNC machine tools  

Science Journals Connector (OSTI)

Abstract Nonlinear and configuration-dependent five-axis kinematics make contouring errors difficult to estimate and control in real time. This paper proposes a generalized method for the on-line estimation and control of five-axis contouring errors. First, a generalized Jacobian function is derived based on screw theory in order to synchronize the motions of linear and rotary drives. The contouring error components contributed by all active drives are estimated through interpolated position commands and the generalized Jacobian function. The estimated axis components of contouring errors are fed back to the position commands of each closed loop servo drive with a proportional gain. The proposed contouring error estimation and control methods are general, and applicable to arbitrary five-axis tool paths and any kinematically admissible five-axis machine tools. The proposed algorithms are verified experimentally on a five-axis machine controlled by a modular research CNC system built in-house. The contouring errors are shown to be reduced by half with the proposed method, which is simple to implement in existing CNC systems.

Jixiang Yang; Yusuf Altintas

2015-01-01T23:59:59.000Z

65

Induction machine  

DOE Patents [OSTI]

A polyphase rotary induction machine for use as a motor or generator utilizing a single rotor assembly having two series connected sets of rotor windings, a first stator winding disposed around the first rotor winding and means for controlling the current induced in one set of the rotor windings compared to the current induced in the other set of the rotor windings. The rotor windings may be wound rotor windings or squirrel cage windings.

Owen, Whitney H. (Ogden, UT)

1980-01-01T23:59:59.000Z

66

International Conference on Machine Control & Guidance 2008 1 Autonomous Navigation Tool for Real & Virtual Field  

E-Print Network [OSTI]

on sensor fusion and fuzzy logic, has been realised. The data of various sensors are transferred to control Fusion, Agriculture Applications, Fuzzy Logic, Navigation Control. 1 INTRODUCTION The development of the navigation control to a constant one, whatever the number of fusioned sensors is. A Fuzzy Logic Controller

67

A Prototyping Environment for Research on Human-Machine Interfaces in Process Control: Use of Microsoft WPF for Microworld and Distributed Control System Development  

SciTech Connect (OSTI)

Operators of critical processes, such as nuclear power production, must contend with highly complex systems, procedures, and regulations. Developing human-machine interfaces (HMIs) that better support operators is a high priority for ensuring the safe and reliable operation of critical processes. Human factors engineering (HFE) provides a rich and mature set of tools for evaluating the performance of HMIs, but the set of tools for developing and designing HMIs is still in its infancy. Here we propose that Microsoft Windows Presentation Foundation (WPF) is well suited for many roles in the research and development of HMIs for process control.

Roger Lew; Ronald L. Boring; Thomas A. Ulrich

2014-08-01T23:59:59.000Z

68

Quantum Learning Machine  

E-Print Network [OSTI]

We propose a novel notion of a quantum learning machine for automatically controlling quantum coherence and for developing quantum algorithms. A quantum learning machine can be trained to learn a certain task with no a priori knowledge on its algorithm. As an example, it is demonstrated that the quantum learning machine learns Deutsch's task and finds itself a quantum algorithm, that is different from but equivalent to the original one.

Jeongho Bang; James Lim; M. S. Kim; Jinhyoung Lee

2008-03-20T23:59:59.000Z

69

Plasma-materials interactions and impurity control in magnetically confined thermonuclear fusion machines  

Science Journals Connector (OSTI)

Progress achieved in plasma heating and magnetic confinement during the past decade has brought to the fore a number of problems which have to be solved if controlled thermonuclear fusion is to become an economic...

Dieter M. Gruen; Stanislav Vep?ek; Randy B. Wright

1980-01-01T23:59:59.000Z

70

Machines that understand music  

E-Print Network [OSTI]

Powered Machine Learning . . . . . . . . . . . . . . . .Powered Machine Learning . . . . . . . . . . . . . . . . .passive). Integrating active machine learning with Herd It’s

Barrington, Luke

2012-01-01T23:59:59.000Z

71

MACHINE CONTEST MACHINE VOLUME WORKSHEET  

E-Print Network [OSTI]

MACHINE CONTEST® MACHINE VOLUME WORKSHEET Note: Each square is 1' x 1' (0.3 m x 0.3 m) (Official the footprint of your machine NOTE: If any part of the machine falls within a square, you must count the entire: _______________ (choose one: ft2 or m2 ) STEP 3: Measure the height of your machine. NOTE: The maximum height is 8' (2.4 m

Yener, Aylin

72

Control method and system for hydraulic machines employing a dynamic joint motion model  

DOE Patents [OSTI]

A control method and system for controlling a hydraulically actuated mechanical arm to perform a task, the mechanical arm optionally being a hydraulically actuated excavator arm. The method can include determining a dynamic model of the motion of the hydraulic arm for each hydraulic arm link by relating the input signal vector for each respective link to the output signal vector for the same link. Also the method can include determining an error signal for each link as the weighted sum of the differences between a measured position and a reference position and between the time derivatives of the measured position and the time derivatives of the reference position for each respective link. The weights used in the determination of the error signal can be determined from the constant coefficients of the dynamic model. The error signal can be applied in a closed negative feedback control loop to diminish or eliminate the error signal for each respective link.

Danko, George (Reno, NV)

2011-11-22T23:59:59.000Z

73

Quantum Machines  

E-Print Network [OSTI]

We discuss quantum information processing machines. We start with single purpose machines that either redistribute quantum information or identify quantum states. We then move on to machines that can perform a number of functions, with the function they perform being determined by a program, which is itself a quantum state. Examples of both deterministic and probabilistic programmable machines are given, and we conclude with a discussion of the utility of quantum programs.

Mark Hillery; Vladimir Buzek

2009-03-24T23:59:59.000Z

74

Federal Energy Management Program: Covered Product Category: Refrigerated  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Refrigerated Beverage Vending Machines to someone by E-mail Refrigerated Beverage Vending Machines to someone by E-mail Share Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on Facebook Tweet about Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on Twitter Bookmark Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on Google Bookmark Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on Delicious Rank Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on Digg Find More places to share Federal Energy Management Program: Covered Product Category: Refrigerated Beverage Vending Machines on AddThis.com...

75

: Helmholtz machine estimation .  

E-Print Network [OSTI]

: Helmholtz machine density estimation . . : . . . (supervised learning) , (active learning) (query learning) [1, 3]. . (unsupervised learning), . , [5]. . Helmholtz machine , . Helmholtz machine : Helmholtz machine [2] . Helmholtz machine (generative network) (recognition network) . , , . Helmholtz machine (self

76

Electric machine  

DOE Patents [OSTI]

An interior permanent magnet electric machine is disclosed. The interior permanent magnet electric machine comprises a rotor comprising a plurality of radially placed magnets each having a proximal end and a distal end, wherein each magnet comprises a plurality of magnetic segments and at least one magnetic segment towards the distal end comprises a high resistivity magnetic material.

El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Reddy, Patel Bhageerath (Madison, WI)

2012-07-17T23:59:59.000Z

77

Biologically inspired mutual synchronization of manufacturing machines  

E-Print Network [OSTI]

Biologically inspired mutual synchronization of manufacturing machines Erjen Lefeber,a,1 , Herman machine is developed. This control system is based on a synchronization mechanism of enzymes replacing of a single turnover cycle. In manufacturing, batch machines serve several jobs simultaneously, e.g., heat

Armbruster, Dieter

78

Simulating Turing Machines on Maurer Machines  

E-Print Network [OSTI]

Simulating Turing Machines on Maurer Machines J.A. Bergstra1,2 and C.A. Middelburg3 1 Programming MB Eindhoven, the Netherlands keesm@win.tue.nl Abstract. Maurer machines are much closer to real computers than Turing machines. Computer instructions play a prominent part in Mau- rer machines. We show

van der Zwaag, Mark

79

EA-1674: Finding of No Significant Impact  

Broader source: Energy.gov [DOE]

Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines

80

NREL: Business Opportunities - Small Business Vendor or Subcontractor...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

& Interpretation Services Transportation Transportation Technology Travel Services Utilities Vending Machine Services Ventilation, Heating, Air Conditioning Warehousing &...

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Precision Timed Machines  

E-Print Network [OSTI]

1.4 Precision Timed Machines . . . . .Precision Timed Machine 2.1precision timed (PRET) machine. pages 264–265, June 2007. [

Liu, Isaac Suyu

2012-01-01T23:59:59.000Z

82

Proceedings of the 2008 International Conference on Electrical Machines Paper ID 1435 Modeling and MPPT Sensorless Control  

E-Print Network [OSTI]

and MPPT Sensorless Control of a DFIG-Based Marine Current Turbine S.E. Ben Elghali1 , M.E.H. Benbouzid1--This paper deals with the modeling and the sensorless control of a variable speed DFIG-based marine current--Marine current turbine (MCT), Doubly-Fed Induction Generator (DFIG), modeling, sensorless control, Maximum Power

Paris-Sud XI, Université de

83

U.S. Department Of Energy Advanced Small Modular Reactor R&D Program: Instrumentation, Controls, and Human-Machine Interface (ICHMI) Pathway  

SciTech Connect (OSTI)

Instrumentation, controls, and human-machine interfaces (ICHMI) are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by licenseability concerns. Although the recent progress in constructing new plants has spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, development of advanced reactor concepts, such as Generation IV designs and small modular reactors, introduces different plant conditions (e.g., higher temperatures, different coolants, etc.) and unique plant configurations (e.g., multiunit plants with shared systems, balance of plant architectures with reconfigurable co-generation options) that increase the need for enhanced ICHMI capabilities to fully achieve industry goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, significant challenges remain to be addressed to enable the nuclear power industry to complete the transition to safe and comprehensive use of modern ICHMI technology. The U.S. Department of Energy (DOE) has recognized that ICHMI research, development, and demonstration (RD&D) is needed to resolve the technical challenges that may compromise the effective and efficient utilization of modern ICHMI technology and consequently inhibit realization of the benefits offered by expanded utilization of nuclear power. Consequently, several DOE programs have substantial ICHMI RD&D elements within their respective research portfolios. This paper describes current ICHMI research in support of advanced small modular reactors. The objectives that can be achieved through execution of the defined RD&D are to provide optimal technical solutions to critical ICHMI issues, resolve technology gaps arising from the unique measurement and control characteristics of advanced reactor concepts, provide demonstration of needed technologies and methodologies in the nuclear power application domain, mature emerging technologies to facilitate commercialization, and establish necessary technical evidence and application experience to enable timely and predictable licensing. 1 Introduction Instrumentation, controls, and human-machine interfaces are essential enabling technologies that strongly influence nuclear power plant performance and operational costs. The nuclear power industry is currently engaged in a transition from traditional analog-based instrumentation, controls, and human-machine interface (ICHMI) systems to implementations employing digital technologies. This transition has primarily occurred in an ad hoc fashion through individual system upgrades at existing plants and has been constrained by licenseability concerns. Although the recent progress in constructing new plants has spurred design of more fully digital plant-wide ICHMI systems, the experience base in the nuclear power application domain is limited. Additionally, development of advanced reactor concepts, such as Generation IV designs and small modular reactors, introduces different plant conditions (e.g., higher temperatures, different coolants, etc.) and unique plant configurations (e.g., multiunit plants with shared systems, balance of plant architectures with reconfigurable co-generation options) that increase the need for enhanced ICHMI capabilities to fully achieve industry goals related to economic competitiveness, safety and reliability, sustainability, and proliferation resistance and physical protection. As a result, significant challenges remain to be addressed to enable the nuclear power industry to complete the transition to safe and comprehensive use of m

Holcomb, David Eugene [ORNL; Wood, Richard Thomas [ORNL

2013-01-01T23:59:59.000Z

84

A Generalized Deletion Machine  

E-Print Network [OSTI]

In this work we prescribe a more generalized quantum-deleting machine (input state dependent). The fidelity of deletion is dependent on some machine parameters such that on alteration of machine parameters we get back to standard deleting machines. We also carried out a various comparative study of various kinds of quantum deleting machines. We also plotted graphs, making a comparative study of fidelity of deletion of the deletion machines, obtained as particular cases on changing the machine parameters of our machine.

Indranil Chakrabarty; Satyabrata Adhikari

2005-11-22T23:59:59.000Z

85

State-Machine Replication  

E-Print Network [OSTI]

State-Machine Replication #12;The Problem Clients Server #12;The Problem Clients Server #12;The (state machine) #12;The Solution 1. Make server deterministic (state machine) State machine #12;The Solution 1. Make server deterministic (state machine) 2. Replicate server State machines #12;The Solution 1

Venkataramani, Arun

86

High Metal Removal Rate Process for Machining Difficult Materials  

Broader source: Energy.gov (indexed) [DOE]

or otherwise restricted information. Project Objective Develop ultrafast laser and precise motion control technologies for micromachining difficult-to-machine...

87

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion  

E-Print Network [OSTI]

MACHINE LEARNING IN A DYNAMIC WORLD Panel Dmussion Miecsyslaw M. Kohr Panel O&m and Editor. Michal~gi,George Mason University R.S.Sutton, GTE Laboratories Machine Learning was established of machine learning research was in Cybernetic Systems and Adaptive Control. Machine Learning has been

Antsaklis, Panos

88

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

kWh/yr) ASHRAE Std. 32.1-2004 Solid/Opaque: 90 ± 2?F (32.2 ±ASHRAE Std. 32.1-2004 Indoor: 75 ± 2?F (23.9 ±1?C); Outdoor: 90

Fridley, David

2010-01-01T23:59:59.000Z

89

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

Appliance Manufacturers (AHAM), and Japan’s own JIS C 9606The U.S. test procedure (AHAM HWL-1) does not include a washAppliance Manufacturers (AHAM) HWL-1 Cold Water: 60 ± 5?F (

Fridley, David

2010-01-01T23:59:59.000Z

90

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

top_runner//tr_fluorescent_light_bulb_jul.2009.pdf NiskinSubcommittee Final Report (bulb type fluorescent lamp). ”Fluorescent Lamps (CFLs) are an efficient lighting alternative to traditional incandescent light bulbs

Fridley, David

2010-01-01T23:59:59.000Z

91

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

intended for household or similar use Japan Test Procedurehousehold clothes washers include the United States, Canada, Korea, the European Union, Australia and New Zealand, Japan,

Fridley, David

2010-01-01T23:59:59.000Z

92

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards and Labeling Programs for Clothes Washers, Water Dispensers, Vending Machines and CFLs  

E-Print Network [OSTI]

energy labels for household clothes washers include the United States, Canada, Korea, the European Union, Australia and New Zealand, Japan,

Fridley, David

2010-01-01T23:59:59.000Z

93

The under-machine inspection system consists of a remotely controlled robot. This device is capable of accessing hard-to-reach areas and deal with poor lighting conditions, thus decreasing the risk of injury for the inspection  

E-Print Network [OSTI]

. The system also contains shock absorbers in its wheels to deal with rough surfaces. The clamps used here special types of wheel to reduce vibrations during motion. Furthermore, ball wheels are used in this robot#12;The under-machine inspection system consists of a remotely controlled robot. This device

Koschan, Andreas

94

Novel Flux Coupling Machine without Permanent Magnets - U Machine...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Novel Flux Coupling Machine without Permanent Magnets - U Machine Novel Flux Coupling Machine without Permanent Magnets - U Machine 2009 DOE Hydrogen Program and Vehicle...

95

Study of the Stability of a Direct Stator Current Controller for a Doubly-Fed Induction Machine using the Complex  

E-Print Network [OSTI]

to renewable energy (wind farms in particular). The proposed control algorithm offers the advantages of proven large speed variations around the synchronous speed. Another advantage is that the power electronic voltage is adopted. This uncommon approach allows for a decomposition of the active and reactive powers

Batlle, Carles

96

Course info Machine Learning  

E-Print Network [OSTI]

Course info Machine Learning Real life problems Lecture 1: Machine Learning Problem Qinfeng (Javen) Shi 28 July 2014 Intro. to Stats. Machine Learning COMP SCI 4401/7401 Qinfeng (Javen) Shi Lecture 1: Machine Learning Problem #12;Course info Machine Learning Real life problems Table of Contents I 1 Course

Shi, Qinfeng "Javen"

97

Instrumentation and Control and Human Machine Interface Science and Technology Roadmap in Support of Advanced Reactors and Fuel Programs in the U.S.  

SciTech Connect (OSTI)

The purpose of this paper is to provide an overview of the current status of the Instrumentation, Control and Human Machine Interface (ICHMI) Science and Technology Roadmap (Reference xi) that was developed to address the major challenges in this technical area for the Gen IV and other U.S. Department of Energy (DOE) initiatives that support future deployments of nuclear energy systems. Reliable, capable ICHMI systems will be necessary for the advanced nuclear plants to be economically competitive. ICHMI enables measurement, control, protection, monitoring, and maintenance for processes and components. Through improvements in the technologies and demonstration of their use to facilitate licensing, ICHMI can contribute to the reduction of plant operations and maintenance costs while helping to ensure high plant availability. The impact of ICHMI can be achieved through effective use of the technologies to improve operational efficiency and optimize use of human resources. However, current licensing experience with digital I&C systems has provided lessons learned concerning the difficulties that can be encountered when introducing advanced technologies with expanded capabilities. Thus, in the development of advanced nuclear power designs, it will be important to address both the technical foundations of ICHMI systems and their licensing considerations. The ICHMI roadmap will identify the necessary research, development and demonstration activities that are essential to facilitate necessary technology advancement and resolve outstanding issues.

Miller, Don W.; Arndt, Steven A.; Dudenhoeffer, Donald D.; Hallbert, Bruce P.; Bond, Leonard J.; Holcomb, David E.; Wood, Richard T.; Naser, Joseph A.; O'Hara, John M.; Quinn, Edward L.

2008-06-01T23:59:59.000Z

98

U.S. Department of Energy Roadmap on Instrumentation, Controls, and Human-Machine Interface Technologies in Current and Future Nuclear Power Plants  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) Office of Nuclear Energy (NE) recently sponsored the creation of a roadmap for instrumentation, controls, and human-machine interface (ICHMI) technology development. The roadmap represents the collective efforts of a group of subject matter experts from the DOE national laboratories, academia, vendors, the U.S. Nuclear Regulatory Commission (NRC), and utilities. It is intended to provide the underpinnings to the government sponsored ICHMI research, development, and demonstration (RD&D) performed in the United States for the next several years. A distinguishing feature of this roadmapping effort is that it is not limited to a technology progression plan but includes a detailed rationale, aimed at the nonspecialist, for the existence of a focused ICHMI RD&D program. Eight specific technology areas were identified for focused RD&D as follows: (1) sensors and electronics for harsh environments,(2) uncertainty characterization for diagnostics/prognostics applications, (3) quantification of software quality for high-integrity digital applications, (4) intelligent controls for nearly autonomous operation of advanced nuclear plants, (5) plant network architecture, (6) intelligent aiding technology for operational support, (7) human system interaction models and analysis tools, and (8) licensing and regulatory challenges and solutions.

Holcomb, David Eugene [ORNL] [ORNL

2007-01-01T23:59:59.000Z

99

Planet of the Machines  

E-Print Network [OSTI]

2011). Rage against the machine: How the digital revolutionMore jobs predicted for machines, not people. The New Yorke - m o re - j o b s - fo r- machines-not-people.html? _r=1

Landers, Tara

2012-01-01T23:59:59.000Z

100

Solving the ANTS Problem with Asynchronous Finite State Machines  

E-Print Network [OSTI]

Solving the ANTS Problem with Asynchronous Finite State Machines Yuval Emek1 , Tobias Langner2 such that each agent is controlled by an asynchronous (randomized) finite state machine: they possess a constant actions are controlled by a randomized finite state machine (FSM) operating in an asynchronous en

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Communicating B Machines Steve Schneider and Helen Treharne  

E-Print Network [OSTI]

Communicating B Machines Steve Schneider and Helen Treharne Department of Computer Science, Royal concurrent B machines. This approach supports compositional veri cation: each of the controlled ma- chines correctness of the com- bined communicating system. Reasoning about controlled machines sep- arately

Doran, Simon J.

102

Virtual cutter path display for dental milling machine  

E-Print Network [OSTI]

This paper presents the prototype of a mixed reality system using the computer controlled dental milling machine, which is called MRD Mill. First, overview of the core dental milling machine developed in this study is ...

Ito, Teruaki

103

Machines registres Yves Lafont  

E-Print Network [OSTI]

Machines à registres Yves Lafont Université d'Aix-Marseille Institut de Mathématiques de Luminy) Pascal Turing Von Neumann #12;Quelle opération calcule cette machine ? Exemple 1 2 registres : (+ 1 Quelle opération calcule cette machine ? #12;Quelle propriété teste cette machine ? Exemple 3 1 seul

Lafont, Yves

104

Virtual machining considering dimensional, geometrical and tool deflection errors in three-axis CNC milling machines  

Science Journals Connector (OSTI)

Abstract Virtual manufacturing systems can provide useful means for products to be manufactured without the need of physical testing on the shop floor. As a result, the time and cost of part production can be decreased. There are different error sources in machine tools such as tool deflection, geometrical deviations of moving axis and thermal distortions of machine tool structures. Some of these errors can be decreased by controlling the machining process and environmental parameters. However other errors like tool deflection and geometrical errors which have a big portion of the total error, need more attention. This paper presents a virtual machining system in order to enforce dimensional, geometrical and tool deflection errors in three-axis milling operations. The system receives 21 dimensional and geometrical errors of a machine tool and machining codes of a specific part as input. The output of the system is the modified codes which will produce actual machined part in the virtual environment.

Mohsen Soori; Behrooz Arezoo; Mohsen Habibi

2014-01-01T23:59:59.000Z

105

Can Machines BeCan Machines Be Polite?Polite?  

E-Print Network [OSTI]

Can Machines BeCan Machines Be Polite?Polite? Michael A. CovingtonMichael A. Covington Artificial Intelligence CenterArtificial Intelligence Center #12;Can machines be polite?Can machines be polite? Machines have beenMachines have been annoying peopleannoying people ever since humanever since human--machine

Covington, Michael A.

106

Hybrid Quantum Cloning Machine  

E-Print Network [OSTI]

In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

2007-05-04T23:59:59.000Z

107

Parameter estimation for knowledge and diagnosis of electrical machines  

E-Print Network [OSTI]

Chapitre 1 Parameter estimation for knowledge and diagnosis of electrical machines Jean in "Control Methods for Electrical Machines, ISTE Ltd and John Wiley & Sons Inc (Ed.) (2009) 207-243" DOI : 10.1002/9780470611760 #12;Chapter 1 Parameter estimation for knowledge and diagnosis of electrical machines 1

Boyer, Edmond

108

Alpha Channeling in Mirror Machines  

SciTech Connect (OSTI)

Because of their engineering simplicity, high-?, and steady-state operation, mirror machines and related open-trap machines such as gas dynamic traps, are an attractive concept for achieving controlled nuclear fusion. In these open-trap machines, the confinement occurs by means of magnetic mirroring, without the magnetic field lines closing upon themselves within the region of particle confinement. Unfortunately, these concepts have not achieved to date very spectacular laboratory results, and their reactor prospects are dimmed by the prospect of a low Q-factor, the ratio of fusion power produced to auxiliary power. Nonetheless, because of its engineering promise, over the years numerous improvements have been proposed to enhance the reactor prospects of mirror fusion, such as tandem designs, end-plugging, and electric potential barriers.

Fisch N.J.

2005-10-19T23:59:59.000Z

109

JBK-75 stainless steel machinability study  

SciTech Connect (OSTI)

The study on forgings characterized machinability of the material by varying cutting speeds and feedrates utilizing four tools for the roughing operation and four tools for the semi-finish operation. Tools tested were obtained from four manufacturers. Twelve parts were machined utilizing an experimental design to determine all possible interactions between cutting speeds and feedrates. To evaluate the machinability of the material, quantitative measures in tool life, tool wear, surface finish, chip control, and material removal rates were analyzed. Benefits gained from this study are: higher material removal rates, longer tool life, minimal tool wear, improved chip control and reliability, increased productivity, and cost minimization.

McManigle, A.P.; Simonis, A.W.

1993-09-02T23:59:59.000Z

110

CNC machining accuracy enhancement by tool path compensation method.  

E-Print Network [OSTI]

??The manufacturing community has been constantly pursuing product quality improvement. As people rely more and more upon computer numerically controlled (CNC) machines to improve flexibility… (more)

Lau, Pak Fai

2005-01-01T23:59:59.000Z

111

International Journal of Systems Science, 2000, volume 31, number 4, pages 519 527 Multi machine power system excitation control design via theories  

E-Print Network [OSTI]

voltage direct current (HVDC) power control design and static voltage condensor (SVC) control design (Lu

Qu, Zhihua

112

What is Machine Learning? About the Course Example Machine Learning  

E-Print Network [OSTI]

What is Machine Learning? About the Course Example Machine Learning DD2431 ¨Orjan Ekeberg Oct­Dec, 2008 What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition A Hypothetical Project What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition

Kjellström, Hedvig

113

What is Machine Learning? About the Course Example Machine Learning  

E-Print Network [OSTI]

What is Machine Learning? About the Course Example Machine Learning DD2431 ¨Orjan Ekeberg Oct­Dec, 2007 What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition A Hypothetical Project What is Machine Learning? About the Course Example 1 What is Machine Learning? Definition

Kjellström, Hedvig

114

Specimen coordinate automated measuring machine/fiducial automated measuring machine  

SciTech Connect (OSTI)

The Specimen coordinate Automated Measuring Machine (SCAMM) and the Fiducial Automated Measuring Machine (FAMM) is a computer controlled metrology system capable of measuring length, width, and thickness, and of locating fiducial marks. SCAMM and FAMM have many similarities in their designs, and they can be converted from one to the other without taking them out of the hot cell. Both have means for: supporting a plurality of samples and a standard; controlling the movement of the samples in the +/- X and Y directions; determining the coordinates of the sample; compensating for temperature effects; and verifying the accuracy of the measurements and repeating as necessary. SCAMM and FAMM are designed to be used in hot cells.

Hedglen, Robert E. (Bethel Park, PA); Jacket, Howard S. (Pittsburgh, PA); Schwartz, Allan I. (Turtle Creek, PA)

1991-01-01T23:59:59.000Z

115

Machine tool locator  

DOE Patents [OSTI]

Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

Hanlon, John A. (Los Alamos, NM); Gill, Timothy J. (Stanley, NM)

2001-01-01T23:59:59.000Z

116

What Can Turing Machines Do? How powerful are Turing machines?  

E-Print Network [OSTI]

1 What Can Turing Machines Do? How powerful are Turing machines? Turing machines can accept any regular or context- free language. Turing machines can perform basic arithmetic computations. Sequencing can be implemented on Turing ma- chines. Subroutine calls can be implemented on Turing machines

Bylander, Tom

117

EA-1674: Final Environmental Assessment  

Broader source: Energy.gov [DOE]

10 CFR 431 Energy Conservation Program: Energy Conservation Standards for Refrigerated Bottled or Canned Beverage Vending Machines

118

Medium Base Compact Fluorescent Lamps | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Templates for Reporting Test Results mediumbasecfltestreporttemplatev1.1.xlsx More Documents & Publications Fluorescent Lamp Ballasts Showerheads Beverage Vending Machines...

119

Lecture outline Support vector machines  

E-Print Network [OSTI]

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution #12;Support Vector Machines · Another possible solution #12;Support Vector Machines · Other possible solutions

Terzi, Evimaria

120

Lecture outline Support vector machines  

E-Print Network [OSTI]

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution B1 #12;Support Vector Machines · Another possible solution B2 #12;Support Vector Machines · Other possible

Terzi, Evimaria

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Structural Risk Minimization Kernels Support Vector Machines Support Vector Machines  

E-Print Network [OSTI]

Dimensional Spaces Many acceptable solutions bad generalization Structural Risk Minimization Kernels SupportStructural Risk Minimization Kernels Support Vector Machines Support Vector Machines Kernel Methods Structural Risk Minimization Kernels Support Vector Machines 1 Structural Risk Minimization High Dimensional

Kjellström, Hedvig

122

Structural Risk Minimization Kernels Support Vector Machines Support Vector Machines  

E-Print Network [OSTI]

Dimensional Spaces Many acceptable solutions #12;Structural Risk Minimization Kernels Support Vector Machines High Dimensional Spaces Many acceptable solutions bad generalization #12;Structural Risk MinimizationStructural Risk Minimization Kernels Support Vector Machines Support Vector Machines Kernel Methods

Kjellström, Hedvig

123

Diamond machine tool face lapping machine  

DOE Patents [OSTI]

An apparatus for shaping, sharpening and polishing diamond-tipped single-point machine tools. The isolation of a rotating grinding wheel from its driving apparatus using an air bearing and causing the tool to be shaped, polished or sharpened to be moved across the surface of the grinding wheel so that it does not remain at one radius for more than a single rotation of the grinding wheel has been found to readily result in machine tools of a quality which can only be obtained by the most tedious and costly processing procedures, and previously unattainable by simple lapping techniques.

Yetter, H.H.

1985-05-06T23:59:59.000Z

124

On parallel machine scheduling 1  

E-Print Network [OSTI]

On parallel machine scheduling 1 machines with setup times. The setup has to be performed by a single server. The objective is to minimize even for the case of two identical parallel machines. This paper presents a pseudopolynomial

Magdeburg, Universität

125

CNC machines(CNC Maschinen)  

Science Journals Connector (OSTI)

The machining of metal components had been done in the past by using conventional machine tools like lathes, milling machines, etc. and the accuracy of the work done was dependent on the skill and experience of t...

2006-01-01T23:59:59.000Z

126

Analysis of electromechanical interactions in a flywheel system with a doubly fed induction machine  

E-Print Network [OSTI]

This paper analyzes the electromechanical inter-action in a flywheel system with a doubly fed induction machine, used for wind farm power smoothing or grid frequency response control. The grid-connected electrical machine ...

Ran, Li

127

Diagnosing the cause of operational faults in machine tools with an open architecture CNC  

Science Journals Connector (OSTI)

The conventional computerized numerical controller (CNC) of machine tools has been increasingly replaced by a PC-based open architecture CNC (OAC) that is independent of a CNC vendor. The OAC and machine tools wi...

Dong Hoon Kim; Sun Ho Kim; Jun-Yeob Song

2005-08-01T23:59:59.000Z

128

Machine Maintenance Integrated Performance Support System  

SciTech Connect (OSTI)

The objectives of this partnership project were to develop a preventive maintenance checklist program, a troubleshooting system for the Vertical Turning Center (VTC)-5, an on-line manual, and to integrate these components with a custom browser that would run on the VTC-5 machine's controller and would support future internet/intranet delivery. Kingsbury provided subject matter experts from engineering, manufacturing, and technical support. They also provided photographs, schematics, and CAD drawings, which AlliedSignal Federal Manufacturing and Technologies (ASFM and T) digitized for use in the final program. Information from The Kingsbury troubleshooting experts were interviewed regarding symptoms and root causes of system malfunctions This knowledge was captured and from it, fault trees were developed. These trees were then incorporated into the EPSS as a troubleshooting tool. The troubleshooting portion of the system presents simple questions to the machine operator in order to determine the likely cause or causes of malfunctions and then recommends systematic corrective actions. The on-line reference manual, covering operations and maintenance, provides text and illustrations to the machine operator in a traditional structure, but additionally offers the capability to search voluminous amounts of technical data and retrieve specific information on request. The maintenance portion of the EPSS includes checklists that are displayed daily, weekly, monthly, and annually, as appropriate, on the VTC-5 controller screen. The controller software is unavailable for machining parts until the machine tool operator goes through and checks off all of the checklist items. This project provided the team with a detailed understanding of the knowledge and information required to produce and support advanced machine tools. In addition, it resulted in the design and construction of a prototype VTC-5 EPSS containing all the logic and interfaces necessary to integrate operations and maintenance information from other Kingsbury machine tools.

Bohley, M.C.; Schwartz, M.E.

1998-03-11T23:59:59.000Z

129

Theory of Molecular Machines. I. Channel Capacity of Molecular Machines  

E-Print Network [OSTI]

Theory of Molecular Machines. I. Channel Capacity of Molecular Machines running title: Channel Capacity of Molecular Machines Thomas D. Schneider version = 5.76 of ccmm.tex 2004 Feb 3 Version 5.67 was submitted 1990 December 5 Schneider, T. D. (1991). Theory of molecular machines. I. Channel capacity

Schneider, Thomas D.

130

Fundamentals of Machine Vision  

Science Journals Connector (OSTI)

Machine vision systems have two primary elements: the camera, which serves as the eye of the system, and a computer video image analyzer. Lighting is also an important consideration. The camera, which may be a...

Richard K. Miller CMfgE

1989-01-01T23:59:59.000Z

131

Machine For Grinding Fog  

E-Print Network [OSTI]

Machine For Grinding Fog, an exhibition of stop motion animated films, revolves around three primary concerns: relationships, psychological or subjective reality, and relativity. Rooted within concerns of faith, personal ethics, and a re...

Ward, Nicholas Adam

2010-04-30T23:59:59.000Z

132

Exotic in Leptonic Machines  

E-Print Network [OSTI]

Selected topics of exotics in leptonic machines are presented, including recent discovery of abnormal structures around the ppbar threshold and new information of the XYZ (charmonium-like) states.

Kai Zhu

2014-08-07T23:59:59.000Z

133

Human-machine interactions  

SciTech Connect (OSTI)

Digital technology utilizing a cognitive model based on human naturalistic decision-making processes, including pattern recognition and episodic memory, can reduce the dependency of human-machine interactions on the abilities of a human user and can enable a machine to more closely emulate human-like responses. Such a cognitive model can enable digital technology to use cognitive capacities fundamental to human-like communication and cooperation to interact with humans.

Forsythe, J. Chris (Sandia Park, NM); Xavier, Patrick G. (Albuquerque, NM); Abbott, Robert G. (Albuquerque, NM); Brannon, Nathan G. (Albuquerque, NM); Bernard, Michael L. (Tijeras, NM); Speed, Ann E. (Albuquerque, NM)

2009-04-28T23:59:59.000Z

134

Sealing intersecting vane machines  

DOE Patents [OSTI]

The invention provides a toroidal intersecting vane machine incorporating intersecting rotors to form primary and secondary chambers whose porting configurations minimize friction and maximize efficiency. Specifically, it is an object of the invention to provide a toroidal intersecting vane machine that greatly reduces the frictional losses through intersecting surfaces without the need for external gearing by modifying the width of one or both tracks at the point of intermeshing. The inventions described herein relate to these improvements.

Martin, Jedd N. (Providence, RI); Chomyszak, Stephen M. (Attleboro, MA)

2007-06-05T23:59:59.000Z

135

MACHINE MONITORING USING PROBABILITY THRESHOLDS  

E-Print Network [OSTI]

MACHINE MONITORING USING PROBABILITY THRESHOLDS AND SYSTEM OPERATING CHARACTERISTICS Stephen M a discrete-part production machine, with the objective of effectively determining when to shut the machine analysis: a) There is an underlying time interval that characterizes the operation of the machine, most

Pollock, Stephen

136

Harvesting Machine Census 1999 & 2001  

E-Print Network [OSTI]

1 Harvesting Machine Census 1999 & 2001 231 Corstorphine Road Edinburgh EH12 7AT www.forestry.gov.uk FCTN001 SUMMARY This Technical Note contains information on the 1999 and 2001 harvesting machine machines, converted forwarders, etc., account for the remaining machines. In the 2001 census, 65

137

Autonomous Fruit Picking Machine: A Robotic Apple Harvester  

E-Print Network [OSTI]

Autonomous Fruit Picking Machine: A Robotic Apple Harvester Johan Baeten1 , Kevin Donn´e2 , Sven the construction and functionality of an Au- tonomous Fruit Picking Machine (AFPM) for robotic apple harvesting with a camera mounted inside. The proposed concepts guarantee adequate control of the autonomous fruit

Paris-Sud XI, Université de

138

Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT  

E-Print Network [OSTI]

Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: TRAINING AND INSPECTIONS during maintenance and repair operations. In these situations, a Lockout/Tagout (LO/TO) program must "Control of Hazardous Energy: Lockout/Tagout (LO/TO) for Machines and Equipment." This course is available

Farritor, Shane

139

Non-traditional machining techniques  

SciTech Connect (OSTI)

During the course of machining targets for various experiments it sometimes becomes necessary to adapt fixtures or machines, which are designed for one function, to another function. When adapting a machine or fixture is not adequate, it may be necessary to acquire a machine specifically designed to produce the component required. In addition to the above scenarios, the features of a component may dictate that multi-step machining processes are necessary to produce the component. This paper discusses the machining of four components where adaptation, specialized machine design, or multi-step processes were necessary to produce the components.

Day, Robert D [Los Alamos National Laboratory; Fierro, Frank [Los Alamos National Laboratory; Garcia, Felix P [Los Alamos National Laboratory; Hatch, Douglass J [Los Alamos National Laboratory; Randolph, Randall B [Los Alamos National Laboratory; Reardon, Patrick T [Los Alamos National Laboratory; Rivera, Gerald [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

140

High-Performance Control of Two Three-Phase Permanent-Magnet Synchronous Machines in an Integrated Drive for Automotive Applications  

SciTech Connect (OSTI)

The closed-loop control of an integrated dual AC drive system is presented to control two three-phase permanent-magnet motors. A five-leg inverter is employed in the drive system; three of the inverter legs are for a main traction motor, but only two are needed for a three-phase auxiliary motor by utilizing the neutral point of the traction motor. An integrated drive with reduced component count is therefore achieved by eliminating one inverter leg and its gate drivers. A modified current control scheme based on the rotor flux orientation principle is presented. Simulation and experimental results are included to verify the independent control capability of the integrated drive.

Tang, Lixin [ORNL; Su, Gui-Jia [ORNL

2008-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Nanoscale Molecular Transport by Synthetic DNA Machines  

E-Print Network [OSTI]

Nanoscale Molecular Transport by Synthetic DNA Machines Jong-Shik Shin1 and Niles A. Pierce1,2 1 a processive bipedal DNA walker. Powered by externally controlled DNA fuel strands, the walker locomotes with a 5 nm stride by advancing the trailing foot to the lead at each step. On a periodic DNA track

Pierce, Niles A.

142

Information, knowledge and the future of machines  

Science Journals Connector (OSTI)

...Man-Machine Systems Models, Statistical...trends Technology Assessment, Biomedical 10...speed-control system and one without...and influence steam flow. In the...satisfactorily (using the tools of the physicist's...pattern-processing systems which are involved...is a valuable tool when comparing...

2003-01-01T23:59:59.000Z

143

BCDA Machine Status Link  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machine Status Link Machine Status Link Version 1.33 (December 2005) David M. Kline. The Machine Status Link (MSL) is responsible for distributing the digitized beam current, injection status, P0 clock, and other statuses over a single fiber to several locations around the Storage Ring. The MRD100 is a VME-based module that is part of the MSL and was specifically designed for the APS. It receives and interprets information from the XMS100 module by means of copper or fiber. Signals from the XMS100 module are sent at a P0 rate (3.667 microseconds). It sends two registers every cycle and all in about 12 cycles. Refer to the ASD website for additional information regarding the MSL. The focus of this page is to provide information of how to configure the MRD100 for a beamline IOC and to discuss the sample IOC

144

Micro-machined resonator  

DOE Patents [OSTI]

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, N.A.; Koehler, D.R.; Liang, A.Y.; Smith, B.K.

1993-03-30T23:59:59.000Z

145

Micro-machined resonator  

DOE Patents [OSTI]

A micro-machined resonator, typically quartz, with upper and lower micro-machinable support members, or covers, having etched wells which may be lined with conductive electrode material, between the support members is a quartz resonator having an energy trapping quartz mesa capacitively coupled to the electrode through a diaphragm; the quartz resonator is supported by either micro-machined cantilever springs or by thin layers extending over the surfaces of the support. If the diaphragm is rigid, clock applications are available, and if the diaphragm is resilient, then transducer applications can be achieved. Either the thin support layers or the conductive electrode material can be integral with the diaphragm. In any event, the covers are bonded to form a hermetic seal and the interior volume may be filled with a gas or may be evacuated. In addition, one or both of the covers may include oscillator and interface circuitry for the resonator.

Godshall, Ned A. (Albuquerque, NM); Koehler, Dale R. (Albuquerque, NM); Liang, Alan Y. (Albuquerque, NM); Smith, Bradley K. (Albuquerque, NM)

1993-01-01T23:59:59.000Z

146

EE 341.3 (3L-3P alternate week) Electric Machines Fundamentals  

E-Print Network [OSTI]

EE 341.3 (3L-3P alternate week) Electric Machines Fundamentals Department of Electrical and Computer Engineering Fall 2014 Description: This course covers the steady-state theory of electric machines, operating characteristics, motor characteristics and speed control; DC machines-operation, efficiency, shunt

Saskatchewan, University of

147

Rotary-linear axes for high speed machining  

E-Print Network [OSTI]

This thesis presents the design, analysis, fabrication, and control of a rotary-linear axis; this axis is a key subsystem for high speed, 5-axis machine tools intended for fabricating centimeter-scale parts. The rotary-linear ...

Liebman, Michael Kevin, 1974-

2001-01-01T23:59:59.000Z

148

Field-Programmable Custom Computing Machines - A Taxonomy -  

Science Journals Connector (OSTI)

The ability for providing a hardware platformwhich can be customized on a per-application basis under software control has established Reconfigurable Computing (RC) as a new computing paradigm. A machine employing the RC paradigm is referred to as a ...

Mihai Sima; Stamatis Vassiliadis; Sorin Cotofana; Jos T. J. van Eijndhoven; Kees A. Vissers

2002-09-01T23:59:59.000Z

149

Gallant Precision Machining GPM | Open Energy Information  

Open Energy Info (EERE)

Gallant Precision Machining GPM Gallant Precision Machining GPM Jump to: navigation, search Name Gallant Precision Machining (GPM) Place Hsinchu, Taiwan Sector Solar Product Engaged in the design and manufacture of solar cell manufacturing equpiment. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

150

Precision Robotic Assembly Machine  

SciTech Connect (OSTI)

The world's largest laser system is the National Ignition Facility (NIF), located at Lawrence Livermore National Laboratory. NIF's 192 laser beams are amplified to extremely high energy, and then focused onto a tiny target about the size of a BB, containing frozen hydrogen gas. The target must be perfectly machined to incredibly demanding specifications. The Laboratory's scientists and engineers have developed a device called the "Precision Robotic Assembly Machine" for this purpose. Its unique design won a prestigious R&D-100 award from R&D Magazine.

2009-08-14T23:59:59.000Z

151

Automated fiber pigtailing machine  

DOE Patents [OSTI]

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

152

State machine replication for wide area networks  

E-Print Network [OSTI]

state machine . . . . . . . . . . . . . . . . . . 2.4 FLP5.3.3 P: A simple state machine . . . . . . 5.3.4performance metrics of state machine R compared to consensus

Mao, Yanhua

2010-01-01T23:59:59.000Z

153

Fingerprinting Communication and Computation on HPC Machines  

E-Print Network [OSTI]

the Closed World: On Using Machine Learn- ing for Networkand Computation on HPC Machines Sean Peisert Computationalcode running on HPC machines using elements of communication

Peisert, Sean

2010-01-01T23:59:59.000Z

154

Supernova Recognition using Support Vector Machines  

E-Print Network [OSTI]

tion Using Support Vector Machines and Neural Networks.using Support Vector Machines Raquel A. Romano Cecilia R.nding supernovae do not employ machine learning techniques.

Romano, Raquel A.; Aragon, Cecilia R.; Ding, Chris

2006-01-01T23:59:59.000Z

155

The hiphop virtual machine  

Science Journals Connector (OSTI)

The HipHop Virtual Machine (HHVM) is a JIT compiler and runtime for PHP. While PHP values are dynamically typed, real programs often have latent types that are useful for optimization once discovered. Some types can be proven through static analysis, ... Keywords: dynamic languages, jit compiler, php, tracelet

Keith Adams, Jason Evans, Bertrand Maher, Guilherme Ottoni, Andrew Paroski, Brett Simmers, Edwin Smith, Owen Yamauchi

2014-10-01T23:59:59.000Z

156

Micro-machined resonator oscillator  

DOE Patents [OSTI]

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a telemetered sensor beacon'' that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20--100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available. 21 figs.

Koehler, D.R.; Sniegowski, J.J.; Bivens, H.M.; Wessendorf, K.O.

1994-08-16T23:59:59.000Z

157

Micro-machined resonator oscillator  

DOE Patents [OSTI]

A micro-miniature resonator-oscillator is disclosed. Due to the miniaturization of the resonator-oscillator, oscillation frequencies of one MHz and higher are utilized. A thickness-mode quartz resonator housed in a micro-machined silicon package and operated as a "telemetered sensor beacon" that is, a digital, self-powered, remote, parameter measuring-transmitter in the FM-band. The resonator design uses trapped energy principles and temperature dependence methodology through crystal orientation control, with operation in the 20-100 MHz range. High volume batch-processing manufacturing is utilized, with package and resonator assembly at the wafer level. Unique design features include squeeze-film damping for robust vibration and shock performance, capacitive coupling through micro-machined diaphragms allowing resonator excitation at the package exterior, circuit integration and extremely small (0.1 in. square) dimensioning. A family of micro-miniature sensor beacons is also disclosed with widespread applications as bio-medical sensors, vehicle status monitors and high-volume animal identification and health sensors. The sensor family allows measurement of temperatures, chemicals, acceleration and pressure. A microphone and clock realization is also available.

Koehler, Dale R. (Albuquerque, NM); Sniegowski, Jeffry J. (Albuquerque, NM); Bivens, Hugh M. (Albuquerque, NM); Wessendorf, Kurt O. (Albuquerque, NM)

1994-01-01T23:59:59.000Z

158

Heat Machines and Quantum Systems  

E-Print Network [OSTI]

Heat Machines and Quantum Systems: Towards the Third Law Thesis submitted for the degree of "Doctor Machines and Quantum Systems: Towards the Third Law Thesis submitted for the degree of "Doctor

Kosloff, Ronnie

159

The Fusion Machine (extended abstract)  

E-Print Network [OSTI]

The Fusion Machine (extended abstract) Philippa Gardner Cosimo Laneve Lucian Wischik March 27, 2002. In particular, we describe a dis- tributed abstract machine called the fusion machine. In it, only channels exist at runtime. It uses a form of concurrent constraints called fusions--equations on channel names

Gardner, Philippa

160

Materialization of Universal Turing Machines  

E-Print Network [OSTI]

Materialization of Universal Turing Machines Rainer Glaschick supporting Heinz-Nixdorf MuseumsForum Paderborn, Germany #12;Contents Alan Turing's relation to Germany Turing Machines Hasenjaeger on secret communications 1947: Göttingen -- inquiry on state of computing machines #12;Turing and Münster

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Toolbox Safety Talk Woodworking Machines  

E-Print Network [OSTI]

Toolbox Safety Talk Woodworking Machines Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University for many student courses and elective activities. Woodworking machines can pose a myriad of hazards

Pawlowski, Wojtek

162

CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES  

E-Print Network [OSTI]

Chapter 9 CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES Sayan Mukherjee Post biological systems. Molecular classification approaches based on machine learning algorithms applied to DNA., 2001). One particular machine learning algorithm, Support Vector Machines (SVMs), has shown promise

Mukherjee, Sayan

163

Elements for the design of precision machine tools and their application to a prototype 450mm Si-wafer grinder  

E-Print Network [OSTI]

Next generation precision machines will require ever more rigid elements to achieve the required machining tolerances. The presented work focuses on the application of ultra stiff servo-controllable kinematic couplings and ...

Rothenhöfer, Gerald S. (Gerald Sven)

2010-01-01T23:59:59.000Z

164

Comparing the Feasibility of Cutting Thin-Walled Sections from Five Commonly Used Metals Utilizing Wire Electric Discharge Machining.  

E-Print Network [OSTI]

??Wire Electric Discharge Machining (wire-EDM) is a non-traditional machining process. Controlled electric sparks are successively used to vaporize part of a workpiece along a programmed… (more)

Stephenson, Richard C.

2007-01-01T23:59:59.000Z

165

Quantification of uncertainty in machining operations for on-machine acceptance.  

SciTech Connect (OSTI)

Manufactured parts are designed with acceptance tolerances, i.e. deviations from ideal design conditions, due to unavoidable errors in the manufacturing process. It is necessary to measure and evaluate the manufactured part, compared to the nominal design, to determine whether the part meets design specifications. The scope of this research project is dimensional acceptance of machined parts; specifically, parts machined using numerically controlled (NC, or also CNC for Computer Numerically Controlled) machines. In the design/build/accept cycle, the designer will specify both a nominal value, and an acceptable tolerance. As part of the typical design/build/accept business practice, it is required to verify that the part did meet acceptable values prior to acceptance. Manufacturing cost must include not only raw materials and added labor, but also the cost of ensuring conformance to specifications. Ensuring conformance is a substantial portion of the cost of manufacturing. In this project, the costs of measurements were approximately 50% of the cost of the machined part. In production, cost of measurement would be smaller, but still a substantial proportion of manufacturing cost. The results of this research project will point to a science-based approach to reducing the cost of ensuring conformance to specifications. The approach that we take is to determine, a priori, how well a CNC machine can manufacture a particular geometry from stock. Based on the knowledge of the manufacturing process, we are then able to decide features which need further measurements from features which can be accepted 'as is' from the CNC. By calibration of the machine tool, and establishing a machining accuracy ratio, we can validate the ability of CNC to fabricate to a particular level of tolerance. This will eliminate the costs of checking for conformance for relatively large tolerances.

Claudet, Andre A.; Tran, Hy D.; Su, Jiann-Chemg

2008-09-01T23:59:59.000Z

166

Conventional machining methods for rapid prototyping and direct manufacturing  

Science Journals Connector (OSTI)

The material and product accuracy limitations of rapid prototyped products can often prevent the use of rapid prototyping (RP) processes for production of final end-use products. Conventional machining processes are well-developed technologies with the capability of employing a wide range of materials in the creation of highly accurate components. This paper presents an overview of how conventional machining processes can be used for RP and direct manufacturing processes. The methodologies of computer numerical control machining for rapid prototyping (CNC-RP) and wire electronic discharge machining for rapid prototyping (WEDM-RP) are presented in this paper. A general discussion of selection criteria and cost comparisons among both current additive RP and conventional machining approaches to rapid manufacturing are also presented.

Zhi Yang; Richard A. Wysk; Sanjay Joshi; Matthew C. Frank; Joseph E. Petrzelka

2009-01-01T23:59:59.000Z

167

Computational Models -Lecture 6 Turing Machines  

E-Print Network [OSTI]

Computational Models - Lecture 6 Turing Machines Slides modified by Benny Chor, based on original Models - Lecture 6 Turing Machines Turing Machines Slides modified by Benny Chor, based on original Models - Lecture 6 Turing Machines Turing Machines Turing Machines Slides modified by Benny Chor, based

Beimel, Amos

168

International Business Machines Corporation  

Broader source: Energy.gov (indexed) [DOE]

Business Machines Corporation Business Machines Corporation Thomas J. Watson Research Center 1101 Kitchawan Road, NY 10598 Office of the Assistant General Counsel for Technology Transfer and Intellectual Property U.S. Department of Energy 1000 Independence Ave, SW, Washington DC 20585 ATTN: TECHNOLOGY TRANSFER QUESTIONS Sent electronically to GC-62@hq.doe.gov RE: Questions Concerning Technology Transfer Practices at DOE Laboratories Federal Register, Vol. 73, No. 229 Dear Mr. Gottlieb: IBM Corporation appreciates the opportunity to provide comments in response to the Department of Energy notice of inquiry. DOE Laboratories are a fundamental resource to government, industry, academia and the economy as a whole. All can benefit from efficient contracting processes and

169

Forecasting energy markets using support vector machines  

Science Journals Connector (OSTI)

Abstract In this paper we investigate the efficiency of a support vector machine (SVM)-based forecasting model for the next-day directional change of electricity prices. We first adjust the best autoregressive SVM model and then we enhance it with various related variables. The system is tested on the daily Phelix index of the German and Austrian control area of the European Energy Exchange (???) wholesale electricity market. The forecast accuracy we achieved is 76.12% over a 200 day period.

Theophilos Papadimitriou; Periklis Gogas; Efthimios Stathakis

2014-01-01T23:59:59.000Z

170

When the Invisible Punishing Machine is everywhere ... : the mechanism of social control (mass incarceration, institutionalized racism, slavery and repression) in the USA shapes the individual as well as the social space  

E-Print Network [OSTI]

Framed by the following poetic statement: "When the Invisible Punishing Machine is everywhere, creeping into my body, life and spaces, it is like living in a colossal architectural nightmare", this thesis serves first as ...

Negrete Alfaro, Mabel Alejandra

2012-01-01T23:59:59.000Z

171

Methods, systems and apparatus for synchronous current regulation of a five-phase machine  

DOE Patents [OSTI]

Methods, systems and apparatus are provided for controlling operation of and regulating current provided to a five-phase machine when one or more phases has experienced a fault or has failed. In one implementation, the disclosed embodiments can be used to synchronously regulate current in a vector controlled motor drive system that includes a five-phase AC machine, a five-phase inverter module coupled to the five-phase AC machine, and a synchronous current regulator.

Gallegos-Lopez, Gabriel; Perisic, Milun

2012-10-09T23:59:59.000Z

172

Positional reference system for ultraprecision machining  

DOE Patents [OSTI]

A stable positional reference system for use in improving the cutting tool-to-part contour position in numerical controlled-multiaxis metal turning machines is provided. The reference system employs a plurality of interferometers referenced to orthogonally disposed metering bars which are substantially isolated from machine strain induced position errors for monitoring the part and tool positions relative to the metering bars. A microprocessor-based control system is employed in conjunction with the plurality of positions interferometers and part contour description data input to calculate error components for each axis of movement and output them to corresponding axis driven with appropriate scaling and error compensation. Real-time position control, operating in combination with the reference system, makes possible the positioning of the cutting points of a tool along a part locus with a substantially greater degree of accuracy than has been attained previously in the art by referencing and then monitoring only the tool motion relative to a reference position located on the machine base.

Arnold, J.B.; Burleson, R.R.; Pardue, R.M.

1980-09-12T23:59:59.000Z

173

Substantially Parallel Flux Uncluttered Rotor Machines (U-Machine...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

brushless adjustable field excitation for high starting torque, field weakening, and power factor improvement and novel locks for higher peak speed. This novel machine shows...

174

Extremal asymmetric universal cloning machines  

E-Print Network [OSTI]

The trade-offs among various output fidelities of asymmetric universal cloning machines are investigated. First we find out all the attainable optimal output fidelities for the 1 to 3 asymmetric universal cloning machine and it turns out that there are two kinds of extremal asymmetric cloning machines which have to cooperate in order to achieve some of the optimal output fidelities. Second we construct a family of extremal cloning machines that includes the universal symmetric cloning machine as well as an asymmetric 1 to $1+N$ cloning machine for qudits with two different output fidelities such that the optimal trade-off between the measurement disturbance and state estimation is attained in the limit of infinite $N$.

Mingming Jiang; Sixia Yu

2012-02-08T23:59:59.000Z

175

Design of Vitrification Machine  

E-Print Network [OSTI]

or fewer cryo-protectants, this is deemed to be an appropriate number of fluids for the machine to support. Parameters for the protocols will be input using a three-button and LCD interface. These features will allow lab technicians to vitrify or thaw... Interface Are the buttons placed to allow comfortable operation? Are the buttons’ functions clear or intuitive to the user? Do the buttons provide tactile feedback that is pleasing to the user? Is the LCD readout at a comfortable viewing angle? Is the LCD...

McDonald, Todd William

2009-11-30T23:59:59.000Z

176

Evolution of the mirror machine  

SciTech Connect (OSTI)

The history of the magnetic-mirror approach to a fusion reactor is primarily the history of our understanding and control of several crucial physics issues, coupled with progress in the technology of heating and confining a reacting plasma. The basic requirement of an MHD-stable plasma equilibrium was achieved following the early introduction of minimum-B multipolar magnetic fields. In refined form, the same magnetic-well principle carries over to our present experiments and to reactor designs. The higher frequency microinstabilities, arising from the non-Maxwellian particle distributions inherent in mirror machines, have gradually come under control as theoretical prescriptions for distribution functions have been applied in the experiments. Even with stability, the classical plasma leakage through the mirrors posed a serious question for reactor viability until the principle of electrostatic axial stoppering was applied in the tandem mirror configuration. Experiments to test this principle successfully demonstrated the substantial improvement in confinement predicted. Concurrent with advances in mirror plasma physics, development of both high-power neutral beam injectors and high-speed vacuum pumping techniques has played a crucial role in ongoing experiments. Together with superconducting magnets, cryogenic pumping, and high-power radiofrequency heating, these technologies have evolved to a level that extrapolates readily to meet the requirements of a tandem mirror fusion reactor.

Damm, C. C.

1983-08-18T23:59:59.000Z

177

Mysteries of 'molecular machines' revealed  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

companies and researchers to see the detailed inner workings of molecular machines. January 15, 2015 A picture of a membrane protein called cysZ determined with Phenix...

178

Virtual Machine in Automation Projects.  

E-Print Network [OSTI]

?? Virtual machine, as an engineering tool, has recently been introduced into automation projects in Tetra Pak Processing System AB. The goal of this paper… (more)

Xing, Xiaoyuan

2010-01-01T23:59:59.000Z

179

Parameter estimation of vector controlled induction machine  

E-Print Network [OSTI]

s abcs P abcs Rotor voltage equation: where, V? Vab s Vbs V? A? , A = A , R = 0 abcs bs ' s A? 0 0 0 ar r 0, R ~ = 0 0 0 0 rbr 0 0 r? L??. Labs L?s is, Aabcsu) Lbar Lbsbs Lbcs shs Labs L. sec La sar aber(r) Lb ar Less r asbr ascr ar... s abcs P abcs Rotor voltage equation: where, V? Vab s Vbs V? A? , A = A , R = 0 abcs bs ' s A? 0 0 0 ar r 0, R ~ = 0 0 0 0 rbr 0 0 r? L??. Labs L?s is, Aabcsu) Lbar Lbsbs Lbcs shs Labs L. sec La sar aber(r) Lb ar Less r asbr ascr ar...

Rahman, Tahmid Ur

2012-06-07T23:59:59.000Z

180

VIRTUAL MACHINES FOR MESSAGE BASED, REAL-TIME AND INTERACTIVE SIMULATION Department of Industrial and Systems Engineering  

E-Print Network [OSTI]

VIRTUAL MACHINES FOR MESSAGE BASED, REAL-TIME AND INTERACTIVE SIMULATION Hansoo Kim Chen Zhou machine interacts with the material handling system, personnel and cell or shop floor controller in real software tools that are not designed to explicitly model machine interactions. In this research, we develop

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

VSched: Mixing Batch And Interactive Virtual Machines Using  

E-Print Network [OSTI]

the user in direct control of scheduling #12;4 Virtuoso: VM-based Distributed Computing User Orders a raw work · Putting the user in direct control of scheduling #12;12 Periodic Real-time Scheduling ModelVSched: Mixing Batch And Interactive Virtual Machines Using Periodic Real-time Scheduling Bin Lin

Kuzmanovic, Aleksandar

182

Evolutionary Robotics for Legged Machines: From Simulation to Physical Reality  

E-Print Network [OSTI]

. While most robotic systems are use position-controlled actuators whose exact extension can be set that tracks the red ball on the foot of one of the legs of the machine (see inset in Figure 1b for a view from] describe many other interesting hardware experiments evolving controllers for wheeled robots #12;(a) (b) (c

Bongard, Josh

183

Time (hole?) machines John Byron Manchak  

E-Print Network [OSTI]

Time (hole?) machines John Byron Manchak Department of Philosophy, University of Washington, Box machines Hole machines Time travel General relativity a b s t r a c t Within the context of general relativity, we consider a type of "time machine" and introduce the related "hole machine". We review what

Manchak, John

184

Hybrid-secondary uncluttered induction machine  

DOE Patents [OSTI]

An uncluttered secondary induction machine (100) includes an uncluttered rotating transformer (66) which is mounted on the same shaft as the rotor (73) of the induction machine. Current in the rotor (73) is electrically connected to current in the rotor winding (67) of the transformer, which is not electrically connected to, but is magnetically coupled to, a stator secondary winding (40). The stator secondary winding (40) is alternately connected to an effective resistance (41), an AC source inverter (42) or a magnetic switch (43) to provide a cost effective slip-energy-controlled, adjustable speed, induction motor that operates over a wide speed range from below synchronous speed to above synchronous speed based on the AC line frequency fed to the stator.

Hsu, John S. (Oak Ridge, TN)

2001-01-01T23:59:59.000Z

185

Two color machining of composites  

SciTech Connect (OSTI)

Quality cutting and drilling of 9 composite materials is possible using diode-pumped neodymium lasers. Machining at 1.06 {mu}m is improved by optimizing the pulse format of the diode-pumped neodymium lasers of the Precision Laser Machining (PLM) Consortium. Further improvements are obtained with the PLM lasers operating at 0.53 {mu}m.

Maher, W. [Boeing Defense & Space Group, Seattle, WA (United States)

1996-12-31T23:59:59.000Z

186

Finite State Machines Testing problems Conformance Testing Machine Identification FSM-Based Testing  

E-Print Network [OSTI]

Finite State Machines Testing problems Conformance Testing Machine Identification FSM-Based Testing Mousavi: FSM-Based Testing Part II #12;Finite State Machines Testing problems Conformance Testing Machine Identification Outline Finite State Machines Testing problems Conformance Testing Machine Identification Mousavi

Mousavi, Mohammad

187

Extremal quantum cloning machines  

E-Print Network [OSTI]

We investigate the problem of cloning a set of states that is invariant under the action of an irreducible group representation. We then characterize the cloners that are "extremal" in the convex set of group covariant cloning machines, among which one can restrict the search for optimal cloners. For a set of states that is invariant under the discrete Weyl-Heisenberg group, we show that all extremal cloners can be unitarily realized using the so-called "double-Bell states", whence providing a general proof of the popular ansatz used in the literature for finding optimal cloners in a variety of settings. Our result can also be generalized to continuous-variable optimal cloning in infinite dimensions, where the covariance group is the customary Weyl-Heisenberg group of displacements.

G. Chiribella; G. M. D'Ariano; P. Perinotti; N. J. Cerf

2005-07-14T23:59:59.000Z

188

CRAD, Machine Shop Safe Operations Assessment Plan | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Machine Shop Safe Operations Assessment Plan Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop operators are provided a safe and healthful workplace which will reduce or prevent injuries, illnesses, and accidental losses. Criteria: A worker protection program shall be implemented that provides a place of employment free from recognized hazards that are causing or likely to cause death or serious physical harm. (DOE O 440.1A Contractor Requirements Document (CRD)) Employees shall be encouraged to become involved in the identification and control of hazards in the workplace. (DOE O 440.1A CRD) Workers shall have the right, without reprisal, to accompany DOE worker protection personnel during workplace inspections. (DOE O44.1A

189

Logomatic Gmbh Grinding Machines Fabrication | Open Energy Information  

Open Energy Info (EERE)

Logomatic Gmbh Grinding Machines Fabrication Logomatic Gmbh Grinding Machines Fabrication Jump to: navigation, search Name Logomatic Gmbh Grinding Machines Fabrication Place Mainaschaff, Germany Zip D-63814 Sector Solar Product German manufacturer of capital equipment for semiconductor and solar industries; for solar, offers diamond cropping and squaring machines. Coordinates 49.97746°, 9.085379° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":49.97746,"lon":9.085379,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

190

Machine Status | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

User Support User Support Machine Status Presentations Training & Outreach User Survey Machine Status Science on Mira Cores Core Hours Catalyst 65536 114771.01226563 Large scale...

191

Machine scheduling using the Bees algorithm.  

E-Print Network [OSTI]

??Single-machine scheduling is the process of assigning a group of jobs to a machine. The jobs are arranged so that a performance measure, such as… (more)

Phrueksanant, Janyarat

2013-01-01T23:59:59.000Z

192

Hilbert's machine and w-order  

E-Print Network [OSTI]

Hilbert's machine is a supertask machine inspired by Hilbert's Hotel whose functioning leads to a contradictory result involving w-ordering.

Antonio Leon

2006-08-14T23:59:59.000Z

193

Characterization of electrical discharge machining plasmas.  

E-Print Network [OSTI]

??Electrical Discharge Machining (EDM) is a well-known machining technique since more than fifty years. Its principle is to use the eroding effect on the electrodes… (more)

Descoeudres, Antoine

2006-01-01T23:59:59.000Z

194

Walcot Electric Machines | Open Energy Information  

Open Energy Info (EERE)

Walcot Electric Machines Walcot Electric Machines Jump to: navigation, search Name Walcot Electric Machines Place Bath, United Kingdom Zip BA2 7AY Sector Efficiency Product A spin-out from Bath University which that will develop and licence process relating to high efficiency electric motors for fixed speed applications, and will offer endusers substantial reductions in the cost of operation Coordinates 45.467055°, -98.329279° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.467055,"lon":-98.329279,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

195

Overmodulation in Current Controlled Drives  

E-Print Network [OSTI]

220 Chapter 5 Overmodulation in Current Controlled Drives 5.1 Introduction The performance of voltage feedforward controlled constant V f PWM-VSI drives is insu cient for most industrial processes performance control methods. Electric traction, el- evators, textile machines, paper and plastic machines

Hava, Ahmet

196

Slide system for machine tools  

DOE Patents [OSTI]

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, S.S.; Green, W.L.

1980-06-12T23:59:59.000Z

197

Slide system for machine tools  

DOE Patents [OSTI]

The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

Douglass, Spivey S. (Oak Ridge, TN); Green, Walter L. (Knoxville, TN)

1982-01-01T23:59:59.000Z

198

CNC Oxyfuel gas cutting machine  

Science Journals Connector (OSTI)

In today's era of plasma and laser cutting, machines using oxy-acetylene flame are still meritorious due to simplicity and cost effectiveness. Demand for metal cutting with good quality as regarding to edge quality, circularity, formation of redeposit ...

Snehal Gawali; Nilesh Gawali

2010-02-01T23:59:59.000Z

199

A compact molecular beam machine  

SciTech Connect (OSTI)

We have developed a compact, low cost, modular, crossed molecular beam machine. The new apparatus utilizes several technological advancements in molecular beams valves, ion detection, and vacuum pumping to reduce the size, cost, and complexity of a molecular beam apparatus. We apply these simplifications to construct a linear molecular beam machine as well as a crossed-atomic and molecular beam machine. The new apparatus measures almost 50 cm in length, with a total laboratory footprint less than 0.25 m{sup 2} for the crossed-atomic and molecular beam machine. We demonstrate the performance of the apparatus by measuring the rotational temperature of nitric oxide from three common molecular beam valves and by observing collisional energy transfer in nitric oxide from a collision with argon.

Jansen, Paul [Vrije Universiteit, 1081 HV Amsterdam (Netherlands); Chandler, David W.; Strecker, Kevin E. [Sandia National Laboratories, Livermore, California 94551 (United States)

2009-08-15T23:59:59.000Z

200

Time Machine at the LHC  

E-Print Network [OSTI]

Recently, black hole and brane production at CERN's Large Hadron Collider (LHC) has been widely discussed. We suggest that there is a possibility to test causality at the LHC. We argue that if the scale of quantum gravity is of the order of few TeVs, proton-proton collisions at the LHC could lead to the formation of time machines (spacetime regions with closed timelike curves) which violate causality. One model for the time machine is a traversable wormhole. We argue that the traversable wormhole production cross section at the LHC is of the same order as the cross section for the black hole production. Traversable wormholes assume violation of the null energy condition (NEC) and an exotic matter similar to the dark energy is required. Decay of the wormholes/time machines and signatures of time machine events at the LHC are discussed.

I. Ya. Aref'eva; I. V. Volovich

2007-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Man-machine interface builders at the Advanced Photon Source  

SciTech Connect (OSTI)

Argonne National Laboratory is constructing a 7-GeV Advanced Photon Source for use as a synchrotron radiation source in basic and applied research. The controls and computing environment for this accelerator complex includes graphical operator interfaces to the machine based on Motif, X11, and PHIGS/PEX. Construction and operation of the control system for this accelerator relies upon interactive interface builder and diagram/editor type tools, as well as a run-time environment for the constructed displays which communicate with the physical machine via network connections. This paper discusses our experience with several commercial CUI builders, the inadequacies found in these, motivation for the development of an application- specific builder, and design and implementation strategies employed in the development of our own Man-Machine Interface builder. 5 refs.

Anderson, M.D.

1991-01-01T23:59:59.000Z

202

Man-machine interface builders at the Advanced Photon Source  

SciTech Connect (OSTI)

Argonne National Laboratory is constructing a 7-GeV Advanced Photon Source for use as a synchrotron radiation source in basic and applied research. The controls and computing environment for this accelerator complex includes graphical operator interfaces to the machine based on Motif, X11, and PHIGS/PEX. Construction and operation of the control system for this accelerator relies upon interactive interface builder and diagram/editor type tools, as well as a run-time environment for the constructed displays which communicate with the physical machine via network connections. This paper discusses our experience with several commercial CUI builders, the inadequacies found in these, motivation for the development of an application- specific builder, and design and implementation strategies employed in the development of our own Man-Machine Interface builder. 5 refs.

Anderson, M.D.

1991-12-31T23:59:59.000Z

203

Machine Learning ! ! ! ! ! Srihari Ising Models, Boltzmann  

E-Print Network [OSTI]

Machine Learning ! ! ! ! ! Srihari 1 Ising Models, Boltzmann Machines, Deep Belief Networks Sargur Srihari srihari@cedar.buffalo.edu #12;Machine Learning ! ! ! ! ! Srihari Topics · Ising Model · Boltzmann · Metric MRF 2 #12;Machine Learning ! ! ! ! ! Srihari Ising Model · Earliest Markov network model

204

Standard Operating Procedure (SOP) -Milling Machine  

E-Print Network [OSTI]

Standard Operating Procedure (SOP) - Milling Machine · Keep all guards in place while operating the machine. · While operating the milling machine allow no one else to touch it. · Keep hands away from moving cutting tools. · Do not make measurements of the stock while the milling machine is powered. · Do

Veiga, Pedro Manuel Barbosa

205

pdf version of the entry Time Machines  

E-Print Network [OSTI]

pdf version of the entry Time Machines http://plato.stanford.edu/archives/win2010/entries/time-machine, Stanford, CA 94305 Time Machines Copyright c 2010 by the authors John Earman and Christian W¨uthrich All rights reserved. Copyright policy: https://leibniz.stanford.edu/friends/info/copyright/ Time Machines

WĂĽthrich, Christian

206

Optimization Online - Optimal Design of Electrical Machines ...  

E-Print Network [OSTI]

Jun 8, 2011 ... Optimal Design of Electrical Machines: Mathematical Programming ... Science and Engineering (Multidisciplinary Design Optimization ).

Sonia Cafieri

2011-06-08T23:59:59.000Z

207

Optimization Algorithms in Machine Learning Stephen Wright  

E-Print Network [OSTI]

Optimization Algorithms in Machine Learning Stephen Wright University of Wisconsin-Madison NIPS Tutorial, 6 Dec 2010 Stephen Wright (UW-Madison) Optimization in Machine Learning NIPS Tutorial, 6 Dec 2010 in machine learning. Stephen Wright (UW-Madison) Optimization in Machine Learning NIPS Tutorial, 6 Dec 2010 2

Wright, Steve

208

CNC Machine Tool's Wear Diagnostic and Prognostic by Using Dynamic Bayesian Networks  

E-Print Network [OSTI]

CNC Machine Tool's Wear Diagnostic and Prognostic by Using Dynamic Bayesian Networks D.A. Tobon of the health condition of a Computer Numerical Control (CNC) tool machine and the estimation of its Remaining of a CNC tool. Simulation results are obtained and discussed at the end of the paper. Keywords: Diagnostic

Paris-Sud XI, Université de

209

Sanden Vendo America: Notice of Allowance (2014-SE-52002) | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

to resume distribution of Class A refrigerated bottled or canned beverage vending machine model Vue30 (with 1128127 cassette refrigeration deck) after Sanden Vendo America...

210

Sanden Vendo America: Proposed Penalty (2014-SE-52002) | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and distributed noncompliant Class A refrigerated bottled or canned beverage vending machine model Vue30 (with 1128127 cassette refrigeration deck) in the U.S. Federal law...

211

Illuminated Exit Signs | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

federal energy conservation standards. illuminatedexitsignsv1.1.xlsx More Documents & Publications Beverage Vending Machines Residential Clothes Dryers Fluorescent Lamp Ballasts...

212

External Power Supplies | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

federal energy conservation standards. externalpowersuppliesv1.1.xlsx More Documents & Publications Illuminated Exit Signs Fluorescent Lamp Ballasts Beverage Vending Machines...

213

Machine Learning Applications for Data Center Optimization Jim Gao, Google  

E-Print Network [OSTI]

The modern data center (DC) is a complex interaction of multiple mechanical, electrical and controls systems improvements in hardware affordability and the exponential growth of Big Data, the modern Internet companyMachine Learning Applications for Data Center Optimization Jim Gao, Google Abstract

Cortes, Corinna

214

Advanced RISC Machines Document Number: ARM DDI 0035A  

E-Print Network [OSTI]

the ARM710 microprocessor, the ARM7100 integrates LCD control, glueless DRAM interface, UART with infraAdvanced RISC Machines ARM Document Number: ARM DDI 0035A Issued: January 1996 Copyright Advanced Data Sheet ARM DDI 0035A The ARM7100 is a high integration microcontroller particularly well

Grantner, Janos L.

215

Automation of Facility Management Processes Using Machine-to-Machine Technologies  

Science Journals Connector (OSTI)

The emergence of machine-to-machine (M2M) technologies as a business opportunity is based on the observation that there are many more machines and objects in the world than people and that an everyday object h...

Sudha Krishnamurthy; Omer Anson; Lior Sapir; Chanan Glezer…

2008-01-01T23:59:59.000Z

216

High-precision micro/nano-scale machining system  

DOE Patents [OSTI]

A high precision micro/nanoscale machining system. A multi-axis movement machine provides relative movement along multiple axes between a workpiece and a tool holder. A cutting tool is disposed on a flexible cantilever held by the tool holder, the tool holder being movable to provide at least two of the axes to set the angle and distance of the cutting tool relative to the workpiece. A feedback control system uses measurement of deflection of the cantilever during cutting to maintain a desired cantilever deflection and hence a desired load on the cutting tool.

Kapoor, Shiv G.; Bourne, Keith Allen; DeVor, Richard E.

2014-08-19T23:59:59.000Z

217

Space vector double frame field oriented control of six phase induction motors  

Science Journals Connector (OSTI)

In this paper a new rotor field orientation control of six phase induction machine is proposed. The machine has two three phase windings spatially shifted by 30 electrical degrees. The dynamic model of the machine is based on the three two dimensional ... Keywords: six-phase induction machine, space voltage modulation, vector control

M. Kamari; M. Keramatzadeh; R. Kianinezhad

2009-03-01T23:59:59.000Z

218

International Conference on Machine Control & Guidance 2008 1 Use of a Machine Control & Guidance System, Deter-  

E-Print Network [OSTI]

number of official laws and standards. Possible solutions include efforts to make engineering to handle the increasing cost pressure? Possible solutions include efforts to make engineering construction accurately. Therefore support by a site worker was required and work was restricted to daylight times

219

Minimal universal quantum heat machine  

E-Print Network [OSTI]

In traditional thermodynamics the Carnot cycle yields the ideal performance bound of heat engines and refrigerators. We propose and analyze a minimal model of a heat machine that can play a similar role in quantum regimes. The minimal model consists of a single two-level system with periodically modulated energy splitting that is permanently, weakly, coupled to two spectrally-separated heat baths at different temperatures. The equation of motion allows to compute the stationary power and heat currents in the machine consistently with the second-law of thermodynamics. This dual-purpose machine can act as either an engine or a refrigerator (heat pump) depending on the modulation rate. In both modes of operation the maximal Carnot efficiency is reached at zero power. We study the conditions for finite-time optimal performance for several variants of the model. Possible realizations of the model are discussed.

David Gelbwaser-Klimovsky; Robert Alicki; Gershon Kurizki

2012-09-06T23:59:59.000Z

220

Single-Molecule Protein Unfolding and Translocation by an ATP-Fueled Proteolytic Machine  

E-Print Network [OSTI]

All cells employ ATP-powered proteases for protein-quality control and regulation. In the ClpXP protease, ClpX is a AAA+ machine that recognizes specific protein substrates, unfolds these molecules, and then translocates ...

Aubin-Tam, Marie-Eve

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Optimization of industrial steam supply and steam-and-condensate farming of machine building enterprise  

Science Journals Connector (OSTI)

The article studies efficient control methods of steam condensing economy of the machine building enterprise. There are recommendations about development of complex decisions based on indicators of energy, technical and economic efficiency.

I A Konahina; N F Kashapov; I R Gil'manshin; R R Ganiev

2014-01-01T23:59:59.000Z

222

Manz Intech Machines Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Intech Machines Co Ltd Intech Machines Co Ltd Jump to: navigation, search Name Manz Intech Machines Co Ltd Place Taoyuan, Taiwan Zip 320 Sector Solar Product Taiwan-based manufacturer producing wet-chemical process equipment for the LCD and PCB industries and for thin-film solar PV production. Coordinates 25.001909°, 121.304977° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":25.001909,"lon":121.304977,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

223

International Business Machines Corp IBM | Open Energy Information  

Open Energy Info (EERE)

Machines Corp IBM Machines Corp IBM Jump to: navigation, search Name International Business Machines Corp (IBM) Place Armonk, New York Zip 10504 Sector Services Product IBM is a technology company supplying hardware, software and Information Technology services. Coordinates 41.119417°, -73.708388° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.119417,"lon":-73.708388,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

224

Mid States Tool and Machine Inc | Open Energy Information  

Open Energy Info (EERE)

and Machine Inc and Machine Inc Jump to: navigation, search Name Mid States Tool and Machine Inc Place decatur, Indiana Zip 46733 Sector Services Product Provides engineering and manufacturing, testing, delivery, and post-installation on-site services. Coordinates 33.23476°, -97.585979° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.23476,"lon":-97.585979,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

225

Resource Letter PBM-1: Physics of biomolecular machines  

Science Journals Connector (OSTI)

All living creatures are made of cells. The cell is the structural and functional unit of life. This Resource Letter serves as a guide to the literature on nano-machines which drive not only intracellular movements but also motility of the cell. These machines are usually proteins or macromolecular assemblies that require appropriate fuel for their operations. Although traditionally these machines were subjects of investigation in biology and biochemistry increasing use of the concepts and techniques of physics in recent years have contributed to the quantitative understanding of the fundamental principles underlying their operational mechanisms. The possibility of exploiting these principles for the design and control of artificial nanomachines has opened up a new frontier in the bottom-up approach to nanotechnology.

Debashish Chowdhury

2009-01-01T23:59:59.000Z

226

Mobile machine hazardous working zone warning system  

DOE Patents [OSTI]

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine. 3 figs.

Schiffbauer, W.H.; Ganoe, C.W.

1999-08-17T23:59:59.000Z

227

Mobile machine hazardous working zone warning system  

DOE Patents [OSTI]

A warning system is provided for a mobile working machine to alert an individual of a potentially dangerous condition in the event the individual strays into a hazardous working zone of the machine. The warning system includes a transmitter mounted on the machine and operable to generate a uniform magnetic field projecting beyond an outer periphery of the machine in defining a hazardous working zone around the machine during operation thereof. A receiver, carried by the individual and activated by the magnetic field, provides an alarm signal to alert the individual when he enters the hazardous working zone of the machine.

Schiffbauer, William H. (Connellsville, PA); Ganoe, Carl W. (Pittsburgh, PA)

1999-01-01T23:59:59.000Z

228

Cooling system for rotating machine  

DOE Patents [OSTI]

An electrical machine comprising a rotor is presented. The electrical machine includes the rotor disposed on a rotatable shaft and defining a plurality of radial protrusions extending from the shaft up to a periphery of the rotor. The radial protrusions having cavities define a fluid path. A stationary shaft is disposed concentrically within the rotatable shaft wherein an annular space is formed between the stationary and rotatable shaft. A plurality of magnetic segments is disposed on the radial protrusions and the fluid path from within the stationary shaft into the annular space and extending through the cavities within the radial protrusions.

Gerstler, William Dwight (Niskayuna, NY); El-Refaie, Ayman Mohamed Fawzi (Niskayuna, NY); Lokhandwalla, Murtuza (Clifton Park, NY); Alexander, James Pellegrino (Ballston Lake, NY); Quirion, Owen Scott (Clifton Park, NY); Palafox, Pepe (Schenectady, NY); Shen, Xiaochun (Schenectady, NY); Salasoo, Lembit (Schenectady, NY)

2011-08-09T23:59:59.000Z

229

CRAD, Machine Shop Safe Operations Assessment Plan | Department...  

Broader source: Energy.gov (indexed) [DOE]

Machine Shop Safe Operations Assessment Plan CRAD, Machine Shop Safe Operations Assessment Plan Performance Objective: The purpose of this assessment is to verify that machine shop...

230

Machine Tool Design and Operation Strategies for Green Manufacturing  

E-Print Network [OSTI]

Power Demand of Precision Machine Tools, MS Thesis, Dept.Environmental Burden for Machine Tool Operation, JSME Int.of Downsized Design for Machine Tools on the Environmental

2010-01-01T23:59:59.000Z

231

Parallel machine match-up scheduling with manufacturing cost considerations  

E-Print Network [OSTI]

approach for the single machine scheduling problem. Journaldecisions on parallel CNC machines: -constraint approach.mechanism for the CNC machine scheduling problems with

Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

2010-01-01T23:59:59.000Z

232

Rage against the machines: how subjects play against learning algorithms  

E-Print Network [OSTI]

B. : Rage against the machines—How Subjects Learn to PlayARTICLE Rage against the machines: how subjects play againsterror. Rage against the machines representative of real

Duersch, Peter; Kolb, Albert; Oechssler, Jörg; Schipper, Burkhard C.

2010-01-01T23:59:59.000Z

233

Simulations of Quantum Turing Machines by Quantum Multi-Stack Machines  

E-Print Network [OSTI]

As was well known, in classical computation, Turing machines, circuits, multi-stack machines, and multi-counter machines are equivalent, that is, they can simulate each other in polynomial time. In quantum computation, Yao [11] first proved that for any quantum Turing machines $M$, there exists quantum Boolean circuit $(n,t)$-simulating $M$, where $n$ denotes the length of input strings, and $t$ is the number of move steps before machine stopping. However, the simulations of quantum Turing machines by quantum multi-stack machines and quantum multi-counter machines have not been considered, and quantum multi-stack machines have not been established, either. Though quantum counter machines were dealt with by Kravtsev [6] and Yamasaki {\\it et al.} [10], in which the machines count with $0,\\pm 1$ only, we sense that it is difficult to simulate quantum Turing machines in terms of this fashion of quantum computing devices, and we therefore prove that the quantum multi-counter machines allowed to count with $0,\\pm 1,\\pm 2,...,\\pm n$ for some $n>1$ can efficiently simulate quantum Turing machines. Therefore, our mail goals are to establish quantum multi-stack machines and quantum multi-counter machines with counts $0,\\pm 1,\\pm 2,...,\\pm n$ and $n>1$, and particularly to simulate quantum Turing machines by these quantum computing devices.

Daowen Qiu

2005-06-06T23:59:59.000Z

234

Machine translation of Arabic dialects  

Science Journals Connector (OSTI)

Arabic Dialects present many challenges for machine translation, not least of which is the lack of data resources. We use crowdsourcing to cheaply and quickly build Levantine-English and Egyptian-English parallel corpora, consisting of 1.1M words and ...

Rabih Zbib; Erika Malchiodi; Jacob Devlin; David Stallard; Spyros Matsoukas; Richard Schwartz; John Makhoul; Omar F. Zaidan; Chris Callison-Burch

2012-06-01T23:59:59.000Z

235

Description of the Scenario Machine  

E-Print Network [OSTI]

We present here an updated description of the "Scenario Machine" code. This tool is used to carry out a population synthesis of binary stars. Previous version of the description can be found at http://xray.sai.msu.ru/~mystery//articles/review/contents.html

V. M. Lipunov; K. A. Postnov; M. E. Prokhorov; A. I. Bogomazov

2007-04-11T23:59:59.000Z

236

Polar Warnings A Lifelike Machine  

E-Print Network [OSTI]

States conducted its last underground nuclear test in 1992 and turned to Los Alamos and the other weapons Certification without Testing LOS ALAMOS DELIVERS THE FIRST NUCLEAR TRIGGER IN 20 YEARS A Lifelike Machine laboratories for a new approach to ensuring the continued safety and reliability of its nuclear deterrent

237

Energy Conservation Within the Paper Machine Room  

E-Print Network [OSTI]

their startling waste of energy, the corrective measures taken to reduce this waste of energy, the potential for waste recovery and equipment available for waste heat recovery. Areas under study include the press section, paper machine dryer section, and machine...

Walker, P. J.; Erskine, K. J.

1979-01-01T23:59:59.000Z

238

A 150-Ton Universal Structure Testing Machine  

Science Journals Connector (OSTI)

... 150-ton universal structure testing machine for Short Bros, and Harland, Ltd. (Engineer, December 26, pp. 594–596). ...

C. F. TIPPER

1948-04-24T23:59:59.000Z

239

TEHNOMUS -New Technologies and Products in Machine Manufacturing Technologies (1) CMM : coordinate measuring machine  

E-Print Network [OSTI]

TEHNOMUS - New Technologies and Products in Machine Manufacturing Technologies (1) CMM : coordinate measuring machine - 1 - COMPARISON OF A MACHINE OF MEASUREMENT WITHOUT CONTACT AND A CMM(1) : OPTIMIZATION products, the process of measurement usually proceeds on a type of machine (for example CMM

Paris-Sud XI, Université de

240

Increasing efficiency of data mining systems by machine unification and double machine cache  

E-Print Network [OSTI]

Increasing efficiency of data mining systems by machine unification and double machine cache and in general data mining systems, we need to search through huge spaces of machine learn- ing algorithms. Meta-learning and other complex data mining approaches need to train and test thousands of learning machines while

Jankowski, Norbert

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Signal machines : localization of isolated accumulation Signal machines : localization of isolated  

E-Print Network [OSTI]

Signal machines : localization of isolated accumulation Signal machines : localization of isolated'Orléans, Orléans, FRANCE 6 mars 2011 Journées Calculabilités Paris 1 / 39 #12;Signal machines : localization of isolated accumulation 1 Signal machines and isolated accumulations 2 Necessary conditions

Durand-Lose, JĂ©rĂ´me

242

Method and apparatus for monitoring machine performance  

DOE Patents [OSTI]

Machine operating conditions can be monitored by analyzing, in either the time or frequency domain, the spectral components of the motor current. Changes in the electric background noise, induced by mechanical variations in the machine, are correlated to changes in the operating parameters of the machine.

Smith, Stephen F. (Loudon, TN); Castleberry, Kimberly N. (Harriman, TN)

1996-01-01T23:59:59.000Z

243

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network [OSTI]

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation, texturing (b) Camera, noise) 2N. D'Apuzzo Photogrammetry and Machine Vision - 3 Point cloud processing, surface generation

Giger, Christine

244

Task and Machine Heterogeneities: Higher Moments Matter  

E-Print Network [OSTI]

Task and Machine Heterogeneities: Higher Moments Matter Abdulla M. Al-Qawasmeh 1 , Anthony A.potter}@colostate.edu jtsmith@digitalglobe.com Abstract - One type of heterogeneous computing (HC) systems consists of machines in this matrix represents the ETC of a specific task on a specific machine when executed exclusively. Heuristics

Maciejewski, Anthony A.

245

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network [OSTI]

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 1. Measurement in images (b) Camera calibration of Photogrammetry and Machine Vision Fully understand: 1. Image based 3D and 4D measurement 2. Image based 3D

Giger, Christine

246

Photogrammetry & Machine Vision 1. Image sensors  

E-Print Network [OSTI]

Photogrammetry & Machine Vision 1. Image sensors (a) Fundamentals of image sensors (b) CCD image. Remondino, N. D'Apuzzo Photogrammetry and Machine Vision ­ 2. Camera calibration and orientation (b) Camera and Machine Vision ­ 2. Camera calibration and orientation (b) Calibration methods (reference object, point

Giger, Christine

247

Virtual Machine Monitors 36.1 Introduction  

E-Print Network [OSTI]

36 Virtual Machine Monitors 36.1 Introduction Years ago, IBM sold mainframes to large organizations, and a problem arose: what if the organization wanted to run different operating systems on the machine? (some yet another level of indirection in the form of a virtual machine monitor, or VMM or just monitor

Sheridan, Jennifer

248

Lean Green Skating Machine Report No. 1  

E-Print Network [OSTI]

Lean Green Skating Machine Report No. 1 Lean Green Skating Machine Report No. 1 Submitted by Simon Page 1 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating Machine Report No. 1 Page 2 of 19 DISTRIBUTION STATEMENT: Distribution authorized to all. #12;Lean Green Skating

Levi, Anthony F. J.

249

Final Report "LAB-SCALE SNOWMAKING MACHINE"  

E-Print Network [OSTI]

Machine 19 Cost Comparison of Carbon Dioxide and Liquid Nitrogen 26 Effects of Input Parameters on Snow snow making machine. The machine uses liquid nitrogen to freeze atomized particles of water with an efficiency of 1.3 pounds of nitrogen per pound of snow. Snow density varies between 20 and 30 lbm/ft3

250

SOVIETS BUILD MACHINES TO PRODUCE KRILL PASTE'  

E-Print Network [OSTI]

EUROPE SOVIETS BUILD MACHINES TO PRODUCE KRILL PASTE' The Soviet Federal Research Institute of Fisheries and Oceanography ( V N I R 0) has built machines for production of a protein- rich paste from protein paste from Black Sea shrimp. Each machine, operated by 2 people, has a processing capacity of 1

251

Computational equivalence between quantum Turing machines  

E-Print Network [OSTI]

Computational equivalence between quantum Turing machines and quantum circuit families Christian Westergaard 21st November 2005 Contents 1 The quantum Turing machine model 5 1.1 Basics of quantum Turing machines . . . . . . . . . . . . . . . . . . . 5 1.2 Projections on the quantum state space

Møller, Jesper Michael

252

Batch Scheduling with Deadlines on Parallel Machines  

E-Print Network [OSTI]

Batch Scheduling with Deadlines on Parallel Machines Peter Brucker Mikhail Y. Kovalyov, Yakov M of scheduling G groups of jobs on m parallel machines is considered. Each group consists of several identical) and to schedule the batches on the machines. It is possible for different batches of the same group

Magdeburg, Universität

253

Energy dissipation in bio molecular machines  

E-Print Network [OSTI]

Energy dissipation in bio molecular machines Thesis for the degree of Philosophiae Doctor Trondheim applied to molecular machines and energy trans- duction and dissipation in these. The main result to include heat effects. This framework is general and can be applied to other molecular machines as well

Kjelstrup, Signe

254

Technical Report No. 2006510 ACCELERATING MACHINES \\Lambda  

E-Print Network [OSTI]

Technical Report No. 2006­510 ACCELERATING MACHINES \\Lambda Robert Fraser and Selim G. Akl School Abstract This paper presents an overview of accelerating machines. We begin by exploring the history of the accelerating machine model and the potential power that it provides. We look at some of the problems that could

Graham, Nick

255

Abstract AndParallel Machines Nachum Dershowitz  

E-Print Network [OSTI]

Abstract And­Parallel Machines Nachum Dershowitz University of Illinois Urbana, IL 61801 U are introduced. The first of them, the And­ Parallel Turing Machine, can be viewed as a generalization of the deterministic Turing machine in which the infinite tape is replaced by an infinite tree­like tape on which

Dershowitz, Nachum

256

BUILDING INFINITE MACHINES E.B. Davies  

E-Print Network [OSTI]

BUILDING INFINITE MACHINES E.B. Davies an infinite computing machine within a continuous Newtonian universe. The relevance of our construction* * to do it, [6, 9]. In section 4 we discuss why our machine is not in conflict with standard impos* *si

Davies, Brian

257

Toolbox Safety Talk Machine Shop Safety  

E-Print Network [OSTI]

Toolbox Safety Talk Machine Shop Safety Environmental Health & Safety Facilities Safety & Health to Environmental Health & Safety for recordkeeping. Machine shops are an integral part of the Cornell University be taken seriously. Many of the most frequently cited OSHA safety standards pertain to machine safeguarding

Pawlowski, Wojtek

258

Nano-Machines Achieve Huge Mechanical Breakthrough  

E-Print Network [OSTI]

NANO TECH Nano-Machines Achieve Huge Mechanical Breakthrough Dublin, Ireland (SPX) Sep 08, 2005 that use molecular 'nano'-machines of this kind to help perform physical tasks. Nano-machines could also owners set to return to battered Orleans l Six dead, two missing after heavy rains hit Page 1 of 3Nano

Leigh, David A.

259

Electrochemical and Electro-Discharge Machining with a Threshold Current  

Science Journals Connector (OSTI)

......machining and electro-discharge machining of a metal...problems in which the electric potential satisfies...ECM), electro-discharge machining (EDM...method of electrochemical arc machining (ECAM...depending upon the local electric current density. In......

A. A. LACEY; M. SHILLOR

1987-01-01T23:59:59.000Z

260

A photonic cluster state machine gun  

E-Print Network [OSTI]

We present a method to convert certain single photon sources into devices capable of emitting large strings of photonic cluster state in a controlled and pulsed "on demand" manner. Such sources would greatly reduce the resources required to achieve linear optical quantum computation. Standard spin errors, such as dephasing, are shown to affect only 1 or 2 of the emitted photons at a time. This allows for the use of standard fault tolerance techniques, and shows that the photonic machine gun can be fired for arbitrarily long times. Using realistic parameters for current quantum dot sources, we conclude high entangled-photon emission rates are achievable, with Pauli-error rates per photon of less than 0.2%. For quantum dot sources the method has the added advantage of alleviating the problematic issues of obtaining identical photons from independent, non-identical quantum dots, and of exciton dephasing.

Netanel H. Lindner; Terry Rudolph

2008-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Reliable Software Development for Machine Protection Systems  

E-Print Network [OSTI]

The Controls software for the Large Hadron Collider (LHC) at CERN, with more than 150 millions lines of code, resides amongst the largest known code bases in the world1. Industry has been applying Agile software engineering techniques for more than two decades now, and the advantages of these techniques can no longer be ignored to manage the code base for large projects within the accelerator community. Furthermore, CERN is a particular environment due to the high personnel turnover and manpower limitations, where applying Agile processes can improve both, the codebase management as well as its quality. This paper presents the successful application of the Agile software development process Scrum for machine protection systems at CERN, the quality standards and infrastructure introduced together with the Agile process as well as the challenges encountered to adapt it to the CERN environment.

Anderson, D; Dragu, M; Fuchsberger, K; Garnier, JC; Gorzawski, AA; Koza, M; Krol, K; Misiowiec, K; Stamos, K; Zerlauth, M

2014-01-01T23:59:59.000Z

262

Flexible human machine interface for process diagnostics  

SciTech Connect (OSTI)

A flexible human machine interface to design and display graphical and textual process diagnostic information is presented. The system operates on different computer hardware platforms, including PCs under MS Windows and UNIX Workstations under X-Windows, in a client-server architecture. The interface system is customized for specific process applications in a graphical user interface development environment by overlaying the image of the process piping and instrumentation diagram with display objects that are highlighted in color during diagnostic display. Customization of the system is presented for Commonwealth Edison`s Braidwood PWR Chemical and Volume Control System with transients simulated by a full-scale operator-training simulator and diagnosed by a computer-based system.

Reifman, J.; Graham, G.E.; Wei, T.Y.C. [Argonne National Lab., IL (United States); Brown, K.R.; Chin, R.Y. [ComEd Chicago, IL (United States)

1996-05-01T23:59:59.000Z

263

Human Reliability Analysis for Digital Human-Machine Interfaces  

SciTech Connect (OSTI)

This paper addresses the fact that existing human reliability analysis (HRA) methods do not provide guidance on digital human-machine interfaces (HMIs). Digital HMIs are becoming ubiquitous in nuclear power operations, whether through control room modernization or new-build control rooms. Legacy analog technologies like instrumentation and control (I&C) systems are costly to support, and vendors no longer develop or support analog technology, which is considered technologically obsolete. Yet, despite the inevitability of digital HMI, no current HRA method provides guidance on how to treat human reliability considerations for digital technologies.

Ronald L. Boring

2014-06-01T23:59:59.000Z

264

Z Machine | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Z Machine | National Nuclear Security Administration Z Machine | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Z Machine Z Machine Home > About Us > Our Programs > Defense Programs > Office of Research, Development, Test, and Evaluation > Office of Inertial Confinement Fusion > Facilities > Z Machine Z Machine Z Machine Sandia National Laboratories

265

Note PC catalogue (Machine body)  

E-Print Network [OSTI]

Specifications Image Brand Model 009 lenovo X61s Core2Duo L7500 1.60GHz 4GB 160GB 12.1inch 1.42Kg Windows Remarks Specifications Image Brand Model 018 Panasonic CF-F8EWMCAC Core2Duo P9300 2.26GHz 2GB 250GB 14 (Machine body) Accessory LAN Wireless LAN PC PC Code Remarks Specifications Image Brand Model 027

Katsumoto, Shingo

266

Electron beam machining using rotating and shaped beam power distribution  

DOE Patents [OSTI]

An apparatus and method for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: 1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and 2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1000 .mu.m (1 mm or larger), compared to the 250 .mu.m diameter of laser drilling.

Elmer, John W. (Pleasanton, CA); O'Brien, Dennis W. (Livermore, CA)

1996-01-01T23:59:59.000Z

267

Electron beam machining using rotating and shaped beam power distribution  

DOE Patents [OSTI]

An apparatus and method are disclosed for electron beam (EB) machining (drilling, cutting and welding) that uses conventional EB guns, power supplies, and welding machine technology without the need for fast bias pulsing technology. The invention involves a magnetic lensing (EB optics) system and electronic controls to: (1) concurrently bend, focus, shape, scan, and rotate the beam to protect the EB gun and to create a desired effective power-density distribution, and (2) rotate or scan this shaped beam in a controlled way. The shaped beam power-density distribution can be measured using a tomographic imaging system. For example, the EB apparatus of this invention has the ability to drill holes in metal having a diameter up to 1,000 {micro}m (1 mm or larger), compared to the 250 {micro}m diameter of laser drilling. 5 figs.

Elmer, J.W.; O`Brien, D.W.

1996-07-09T23:59:59.000Z

268

0-7695-2153-3/04 $20.00 2004 IEEE VMPlants: Providing and Managing Virtual Machine  

E-Print Network [OSTI]

Engineering, University of Florida, Gainesville, FL Abstract Virtual machines provide flexible, powerful) to instantiate and control client-customized virtual execution environments. The plant can be integrated0-7695-2153-3/04 $20.00 © 2004 IEEE VMPlants: Providing and Managing Virtual Machine Execution

Figueiredo, Renato J.

269

Shor's algorithm on a nearest-neighbor machine  

E-Print Network [OSTI]

We give a new ``nested adds'' circuit for implementing Shor's algorithm in linear width and quadratic depth on a nearest-neighbor machine. Our circuit combines Draper's transform adder with approximation ideas of Zalka. The transform adder requires small controlled rotations. We also give another version, with slightly larger depth, using only reversible classical gates. We do not know which version will ultimately be cheaper to implement.

Samuel A. Kutin

2006-08-31T23:59:59.000Z

270

Intelligent Control of Modular Robotic Welding Cell  

SciTech Connect (OSTI)

Although robotic machines are routinely used for welding, such machines do not normally incorporate intelligent capabilities. We are studying the general problem of formulating usable levels of intelligence into welding machines. From our perspective, an intelligent machine should: incorporate knowledge of the welding process, know if the process is operating correctly, know if the weld it is making is good or bad, have the ability to learn from its experience to perform welds, and be able to optimize its own performance. To this end, we are researching machine architecture, methods of knowledge representation, decision making and conflict resolution algorithms, methods of learning and optimization, human/machine interfaces, and various sensors. This paper presents work on the machine architecture and the human/machine interface specifically for a robotic, gas metal arc welding cell. Although the machine control problem is normally approached from the perspective of having a central body of control in the machine, we present a design using distributed agents. A prime goal of this work is to develop an architecture for an intelligent machine that will support a modular, plug and play standard. A secondary goal of this work is to formulate a human/machine interface that treats the human as an active agent in the modular structure.

Smartt, Herschel Bernard; Kenney, Kevin Louis; Tolle, Charles Robert

2002-04-01T23:59:59.000Z

271

AC Ward Leonard drive systems: Revisiting the four-quadrant operation of AC machines  

Science Journals Connector (OSTI)

Abstract In this paper, the problem of controlling the speed of AC machines in four quadrants is revisited from a completely new viewpoint, based on the idea of powering an AC machine with a synchronous generator that generates a variable-voltage–variable-frequency supply. This is a natural, mathematical, but not physical, extension of the conventional Ward Leonard drive systems for DC machines to AC machines. As a result, AC drives can be regarded as generator-motor systems, which facilitate the analysis of AC drives and the introduction of other special functions because a system consisting of a generator and a motor is easier to be handled than the conventional AC drive that consists of an inverter and a motor. Control strategies, with and without a speed sensor, are proposed to implement this idea and the experimental results are presented to demonstrate the feasibility.

Qing-Chang Zhong

2013-01-01T23:59:59.000Z

272

Chip breaking system for automated machine tool  

DOE Patents [OSTI]

The invention is a rotary selectively directional valve assembly for use in an automated turret lathe for directing a stream of high pressure liquid machining coolant to the interface of a machine tool and workpiece for breaking up ribbon-shaped chips during the formation thereof so as to inhibit scratching or other marring of the machined surfaces by these ribbon-shaped chips. The valve assembly is provided by a manifold arrangement having a plurality of circumferentially spaced apart ports each coupled to a machine tool. The manifold is rotatable with the turret when the turret is positioned for alignment of a machine tool in a machining relationship with the workpiece. The manifold is connected to a non-rotational header having a single passageway therethrough which conveys the high pressure coolant to only the port in the manifold which is in registry with the tool disposed in a working relationship with the workpiece. To position the machine tools the turret is rotated and one of the tools is placed in a material-removing relationship of the workpiece. The passageway in the header and one of the ports in the manifold arrangement are then automatically aligned to supply the machining coolant to the machine tool workpiece interface for breaking up of the chips as well as cooling the tool and workpiece during the machining operation.

Arehart, Theodore A. (Clinton, TN); Carey, Donald O. (Oak Ridge, TN)

1987-01-01T23:59:59.000Z

273

UC Santa Barbara Policy 6015 Issuing Unit: Housing & Auxiliary Services Date: February 1, 1985  

E-Print Network [OSTI]

, Campus Food Service. The Director will authorize the placement of all vending machines and will negotiateUC Santa Barbara Policy 6015 Policies Issuing Unit: Housing & Auxiliary Services Date: February 1, 1985 VENDING MACHINES I. REFERENCES: A. UCSB Policies Manual, Policy 6010, Sale or Distribution of Food

Sideris, Thomas C.

274

Efficient Checkpointing of Virtual Machines using Virtual Machine Introspection  

SciTech Connect (OSTI)

Cloud Computing environments rely heavily on system-level virtualization. This is due to the inherent benefits of virtualization including fault tolerance through checkpoint/restart (C/R) mechanisms. Because clouds are the abstraction of large data centers and large data centers have a higher potential for failure, it is imperative that a C/R mechanism for such an environment provide minimal latency as well as a small checkpoint file size. Recently, there has been much research into C/R with respect to virtual machines (VM) providing excellent solutions to reduce either checkpoint latency or checkpoint file size. However, these approaches do not provide both. This paper presents a method of checkpointing VMs by utilizing virtual machine introspection (VMI). Through the usage of VMI, we are able to determine which pages of memory within the guest are used or free and are better able to reduce the amount of pages written to disk during a checkpoint. We have validated this work by using various benchmarks to measure the latency along with the checkpoint size. With respect to checkpoint file size, our approach results in file sizes within 24% or less of the actual used memory within the guest. Additionally, the checkpoint latency of our approach is up to 52% faster than KVM s default method.

Aderholdt, Ferrol [Tennessee Technological University] [Tennessee Technological University; Han, Fang [Tennessee Technological University] [Tennessee Technological University; Scott, Stephen L [ORNL] [ORNL; Naughton, III, Thomas J [ORNL

2014-01-01T23:59:59.000Z

275

Deutsch's Universal Quantum Turing Machine (Revisited)  

E-Print Network [OSTI]

Deutsch, Feynman, and Manin viewed quantum computing as a kind of universal physical simulation procedure. Much of the writing about quantum Turing machines has shown how these machines can simulate an arbitrary unitary transformation on a finite number of qubits. This interesting problem has been addressed most famously in a paper by Deutsch, and later by Bernstein and Vazirani. Quantum Turing machines form a class closely related to deterministic and probabilistic Turing machines and one might hope to find a universal machine in this class. A universal machine is the basis of a notion of programmability. The extent to which universality has in fact been established by the pioneers in the field is examined and a key notion in theoretical computer science (universality) is scrutinised. In a forthcoming paper, the authors will also consider universality in the quantum gate model.

Willem Fouché; Johannes Heidema; Glyn Jones; Petrus H. Potgieter

2007-01-16T23:59:59.000Z

276

A conversational Chinese Tutoring Machine  

E-Print Network [OSTI]

CAI (LAMBDA NIL (PROG1 (SET PARA) (CAIM07) (CAIM03) (CLRSCRN) (PRINTX '(Thanks for joining the Chinese Tutoring Machine) 9 15) (PRINTX '(bye bye !) 11 35) ) )) t*'0 '0'0************'k 'k*****V '@*It%'**'k**'k****'k**'@**1k *ll 'Nf****'k 0 'kt... **'0 * FUNCTION : CAIM03 This is the main driver function for lesson section. ***4'***1@*'0 4 4 'P * a%****'k 'k****'0**4 *V k*%**%'**%********%'**'I*V 4 4*** (DEFUN CAIM03 (LAMBDA NIL ( PROG1 (CAIM04) (COND ((EQUAL RES 'E) T) (T (CAIM05) (CAIM...

Cheng, Long-Fung

2012-06-07T23:59:59.000Z

277

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine 14 are provided for cutting a workpiece 12 such as concrete. A gun barrel 16 is provided for repetitively loading projectiles 22 therein and is supplied with a pressurized propellant from a storage tank 28. A thermal storage tank 32,32A is disposed between the propellant storage tank 28 and the gun barrel 16 for repetitively receiving and heating propellant charges which are released in the gun barrel 16 for repetitively firing projectiles 22 therefrom toward the workpiece 12. In a preferred embodiment, hypervelocity of the projectiles 22 is obtained for cutting the concrete workpiece 12 by fracturing thereof.

Powell, James R. (Shoreham, NY); Reich, Morris (Queens, NY)

1996-11-12T23:59:59.000Z

278

Free-piston cutting machine  

DOE Patents [OSTI]

A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

Ciccarelli, Gaby (East Setauket, NY); Subudhi, Manomohan (East Setauket, NY); Hall, Robert E. (Port Jefferson, NY)

2000-01-01T23:59:59.000Z

279

Hypervelocity cutting machine and method  

DOE Patents [OSTI]

A method and machine are provided for cutting a workpiece such as concrete. A gun barrel is provided for repetitively loading projectiles therein and is supplied with a pressurized propellant from a storage tank. A thermal storage tank is disposed between the propellant storage tank and the gun barrel for repetitively receiving and heating propellant charges which are released in the gun barrel for repetitively firing projectiles therefrom toward the workpiece. In a preferred embodiment, hypervelocity of the projectiles is obtained for cutting the concrete workpiece by fracturing thereof. 10 figs.

Powell, J.R.; Reich, M.

1996-11-12T23:59:59.000Z

280

Rapid Response Small Machining NNR Project 703025  

SciTech Connect (OSTI)

This project was an effort to develop a machining area for small sized parts that is capable of delivering product with a quick response time. This entailed focusing efforts on leaning out specific work cells that would result in overall improvement to the entire machining area. This effort involved securing the most efficient available technologies for these areas. In the end, this incorporated preparing the small machining area for transformation to a new facility.

Kanies, Tim

2008-12-05T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Control system for the prototype of hydrogen powered car  

Science Journals Connector (OSTI)

The contribution describes design and construction of hydrogen powered car based on fuel cell technology and electrical DC-drive. The main focus is given to control system and human machine interface of the car. The practical solution of control system ... Keywords: control system design, fuel cells, human machine interface, hydrogen, programmable controllers

Jiri Koziorek; Zdenek Slanina

2005-11-01T23:59:59.000Z

282

Enabling cyber-physical systems with machine-to-machine technologies  

Science Journals Connector (OSTI)

In recent years, Cyber-Physical Systems (CPS) has emerged as a promising direction to enrich the interactions between physical and virtual worlds. While Machine-to-Machine (M2M), Wireless Sensor Networks (WSNs) and CPS are quite similar in many networking aspects, there are still some major differences. In this paper, we first review several concepts and terms, including M2M, WSNs, CPS and Internet of Things (IoT). Then, we conduct a case study exemplified by home M2M networks, and outline the further research proposals of M2M communications. On this basis, a case of CPS, Human-Cyber-Physical System (HCPS) to achieve system safety and efficiency for connected vehicles, is proposed, and the research proposals and challenges for HCPS are summarised. Finally, we carry out a comparison of M2M and CPS to demonstrate how M2M systems with the capabilities of decision-making and real-time control can be upgraded to CPS.

Jiafu Wan; Hehua Yan; Qiang Liu; Keliang Zhou; Rongshuang Lu; Di Li

2013-01-01T23:59:59.000Z

283

Design and manufacturing of high precision roll-to-roll multilayer printing machine -- machine upgrade  

E-Print Network [OSTI]

In 2008, a group of MIT Master of Engineering students built a roll to roll machine for printing thiol onto a flexible gold substrate by self-assembly. The machine demonstrated good performance in high speed printing (400 ...

Zhu, Yufei

2009-01-01T23:59:59.000Z

284

Machine Learning for Adaptive Computer Game Opponents .  

E-Print Network [OSTI]

??This thesis investigates the use of machine learning techniques in computer games to create a computer player that adapts to its opponent's game-play. This includes… (more)

Miles, Jonathan David

2009-01-01T23:59:59.000Z

285

Soil Machine Dynamics Ltd | Open Energy Information  

Open Energy Info (EERE)

Dynamics Ltd Jump to: navigation, search Name: Soil Machine Dynamics Ltd Region: United Kingdom Sector: Marine and Hydrokinetic Website: http:http:smd.co.ukproduc This company...

286

Machine Protection System response in 2011  

E-Print Network [OSTI]

The performance of the machine protection system during the 2011 run is summarized in this paper. Following an analysis of the beam dump causes in comparison to the previous 2010 run, special emphasis will be given to analyse events which risked to exposed parts of the machine to damage. Further improvements and mitigations of potential holes in the protection systems as well as in the change management will be evaluated along with their impact on the 2012 run. The role of the restricted Machine Protection Panel ( rMPP ) during the various operational phases such as commissioning, the intensity ramp up and Machine Developments is being discussed.

Zerlauth, M; Wenninger, J

2012-01-01T23:59:59.000Z

287

Atmospheric Plasma Jet Machining of Optical Surfaces  

Science Journals Connector (OSTI)

Deterministic surface machining with high spatial resolution and nanometric depth accuracy is urgently required in the fabrication of high-end optics. Thus, plasma jet tools with...

Böhm, Georg; Eichentopf, Inga-Maria; Arnold, Thomas

288

Optimal Design of Electrical Machines: Mathematical Programming ...  

E-Print Network [OSTI]

global heating up of the winding is rather roughly modeled by Ech (function of current electric ...... Electric Machines and Power Systems, pages. 71–92, 1992.

2012-06-06T23:59:59.000Z

289

6.685 Electric Machines, Fall 2003  

E-Print Network [OSTI]

Treatment of electromechanical transducers, rotating and linear electric machines. Lumped-parameter electromechanics of interaction. Development of device characteristics: energy conversion density, efficiency; and of ...

Kirtley, James L.

290

Electro discharge machining for micro manufacturing.  

E-Print Network [OSTI]

??Due to the high precision and good surface quality that it can give, Electrical Discharge Machining (EDM) is potentially an important process for the fabrication… (more)

Ivanov, Atanas

2008-01-01T23:59:59.000Z

291

MACHINING STABILITY OF WIRE EDM OF TITANIUM.  

E-Print Network [OSTI]

??This work presents an experimental investigation of wire electro-discharge machining (WEDM) of titanium alloy. The outstanding characteristics of titanium alloys such as their compatibility and… (more)

Nourbakhsh, Farnaz

2012-01-01T23:59:59.000Z

292

Logo Turtle Graphics for the Lisp Machine  

E-Print Network [OSTI]

This paper is a manual for an implementation of Logo graphics primitives in Lisp on the MIT Lisp Machine. The graphics system provides:

Lieberman, Henry

1981-05-05T23:59:59.000Z

293

Machine and Beam Delivery Updates  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

MAchine and Beam delivery Updates FY13 MAchine and Beam delivery Updates FY13 Summary of Beam Delivery: FACET Summary Feb_15_22.pdf FACET Summary Feb_15_22.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Feb_23_Mar_1.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_2_8.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_9_15.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_16_22.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_23_29.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Mar_30_Apr_5.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_6_12.pdf FACET Summary Apr_27_May_3.pdf FACET Summary Apr_27_May_3.pdf FACET Summary May_4_10.pdf FACET Summary May_4_10.pdf Emittance Stability in Sector 2_31513.pdf Emittance Stability in Sector 2_31513.pdf FACET beam operations readiness with R56.pdf FACET beam operations readiness with R56.pdf (6/19/2013)

294

Automation of facility management processes using machine-to-machine technologies  

Science Journals Connector (OSTI)

The emergence of machine-to-machine (M2M) technologies as a business opportunity is based on the observation that there are many more machines and objects in the world than people and that an everyday object has more value when it is networked. In this ...

Sudha Krishnamurthy; Omer Anson; Lior Sapir; Chanan Glezer; Mauro Rois; Ilana Shub; Kilian Schloeder

2008-03-01T23:59:59.000Z

295

ECE 432/532 Dynamics of Electromechanical Energy Conversion Catalog Description: Generalized machine theory. Techniques for dynamic analysis of  

E-Print Network [OSTI]

drives Transfer functions and basic control theory Electric machine and drives simulation Measurable. Learning Resources: Mohan, Advanced Electric Drives, MNPERE, 2001 #12;Students with Disabilities-axis equivalent and develop the electrical and mechanical performance equations for dynamic operation (ABET

296

A waterjet mining machine for use in room and pillar mining operations. [Final report  

SciTech Connect (OSTI)

A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

Summers, D.A.

1990-06-01T23:59:59.000Z

297

A waterjet mining machine for use in room and pillar mining operations  

SciTech Connect (OSTI)

A new mining machine is constructed for use in room and pillar mining operations. This machine uses the action of computer controlled, centrally located high pressure cutting lances to cut deep slots in a coal face. These slots stress relieve the coal ahead of the machine and outline blocks of coal. The movement forward of the machine then wedges up the lower block of coal. This wedging action is assisted by the gathering arms of the loader section of the machine, and by underlying oscillating waterjets which create a slot ahead of the loading wedge as it advances. Finally the top section of coal is brought down by the sequential advance of wedge faced roof support members, again assisted by the waterjet action from the central cutting arms. The machine is designed to overcome major disadvantages of existing room and pillar mining machines in regard to a reduction in respirable dust, the creation of an immediate roof support, and an increase in product size, with concomitant reduction in cleaning costs.

Summers, D.A.

1990-06-01T23:59:59.000Z

298

Simplified Hybrid-Secondary Uncluttered Machine And Method  

DOE Patents [OSTI]

An electric machine (40, 40') has a stator (43) and a rotor (46) and a primary air gap (48) has secondary coils (47c, 47d) separated from the rotor (46) by a secondary air gap (49) so as to induce a slip current in the secondary coils (47c, 47d). The rotor (46, 76) has magnetic brushes (A, B, C, D) or wires (80) which couple flux in through the rotor (46) to the secondary coils (47c, 47d) without inducing a current in the rotor (46) and without coupling a stator rotational energy component to the secondary coils (47c, 47d). The machine can be operated as a motor or a generator in multi-phase or single-phase embodiments. A method of providing a slip energy controller is also disclosed.

Hsu, John S [Oak Ridge, TN

2005-05-10T23:59:59.000Z

299

MATERIAL PROCESSING FOR SELF-ASSEMBLING MACHINE SYSTEMS  

SciTech Connect (OSTI)

We are developing an important aspect of a new technology based on self-reproducing machine systems. Such systems could overcome resource limitations and control the deleterious side effects of human activities on the environment. Machine systems capable of building themselves promise an increase in industrial productivity as dramatic as that of the industrial revolution. To operate successfully, such systems must procure necessary raw materials from their surroundings. Therefore, next to automation, most critical for this new technology is the ability to extract important chemicals from readily available soils. In contrast to conventional metallurgical practice, these extraction processes cannot make substantial use of rare elements. We have designed a thermodynamically viable process and experimentally demonstrated most steps that differ from common practice. To this end we had to develop a small, disposable vacuum furnace system. Our work points to a viable extraction process.

K. LACKNER; D. BUTT; C. WENDT

1999-06-01T23:59:59.000Z

300

Quantum Cloning Machines and the Applications  

E-Print Network [OSTI]

No-cloning theorem is fundamental for quantum mechanics and for quantum information science that states an unknown quantum state cannot be cloned perfectly. However, we can try to clone a quantum state approximately with the optimal fidelity, or instead, we can try to clone it perfectly with the largest probability. Thus various quantum cloning machines have been designed for different quantum information protocols. Specifically, quantum cloning machines can be designed to analyze the security of quantum key distribution protocols such as BB84 protocol, six-state protocol, B92 protocol and their generalizations. Some well-known quantum cloning machines include universal quantum cloning machine, phase-covariant cloning machine, the asymmetric quantum cloning machine and the probabilistic quantum cloning machine etc. In the past years, much progress has been made in studying quantum cloning machines and their applications and implementations, both theoretically and experimentally. In this review, we will give a complete description of those important developments about quantum cloning and some related topics. On the other hand, this review is self-consistent, and in particular, we try to present some detailed formulations so that further study can be taken based on those results.

Heng Fan; Yi-Nan Wang; Li Jing; Jie-Dong Yue; Han-Duo Shi; Yong-Liang Zhang; Liang-Zhu Mu

2014-08-02T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Performance of machines for lattice QCD simulations  

E-Print Network [OSTI]

We review the architecture of massively parallel machines used for lattice QCD simulations and present benchmarks for the performance of popular algorithms on these platforms. We cover commercial supercomputers, PC clusters, and custom-designed machines. We also speculate on future developments.

Tilo Wettig

2005-09-23T23:59:59.000Z

302

Chaotic Boltzmann machines with two elements  

E-Print Network [OSTI]

In this brief note, we show that chaotic Boltzmann machines truly yield samples from the probabilistic distribution of the corresponding Boltzmann machines if they are composed of only two elements. This note is an English translation (with slight modifications) of the article originally written in Japanese [H. Suzuki, Seisan Kenkyu 66 (2014), 315-316].

Hideyuki Suzuki

2015-01-28T23:59:59.000Z

303

STOCHASTIC SCHEDULING WITH PREEMPTIVE-REPEAT MACHINE  

E-Print Network [OSTI]

at the point where it was interrupted once the machine becomes operable again+ In the preemptive-repeat model processing will have to restart after the machine resumes its operation+ A significant number of results have is in a metal refinery in which the raw material is to be purified by melting it in a very high temperature

Sun, Xiaoqian

304

Classification and Feature Extraction in Man and Machine  

E-Print Network [OSTI]

Classification and Feature Extraction in Man and Machine Dissertation zur Erlangung des Grades stimuli and for their subsequent classification. A methodology combining human psychophysics and machine learning is introduced, where feature extractors are modeled using methods from unsupervised machine

305

Machine Learning Algorithms for Cancer Diagnosis Abraham Karplus  

E-Print Network [OSTI]

Machine Learning Algorithms for Cancer Diagnosis Abraham Karplus Santa Cruz County Science Fair . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Machine Learning 5 Testing Methods Conclusion 15 Future Work 16 Acknowledgements 17 External software 18 References 19 2 #12;Overview Machine

Karplus, Kevin

306

A hybrid type small 5-axis CNC milling machine  

E-Print Network [OSTI]

5-axis CNC milling machines are important in a number of industries ranging from aerospace to consumer-die-mold machining because they can deliver high machining accuracy with a spindle tilting capacity. Most of these ...

Son, Seung-Kil, 1964-

2002-01-01T23:59:59.000Z

307

Process characterization of Electrical Discharge Machining of highly doped silicon  

E-Print Network [OSTI]

Electrical Discharge Machining (EDM) is an advanced machining process that removes material via thermal erosion through a plasma arc. The machining process is accomplished through the application of high frequency current ...

Crawford, Gregory Allan

2012-01-01T23:59:59.000Z

308

Microsoft Word - Advanced Control Methods_Final_v2_0.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

and control are normally integrated with a station computer, providing human-machine interface for local control, monitoring, and system configuration. * Makes the substation...

309

Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats Application of Machine Learning and Crowdsourcing  

E-Print Network [OSTI]

Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats 1 Application of Machine Learning and Crowdsourcing to Detection of Cybersecurity Threats February 2011 Eugene of Cybersecurity Threats 2 Abstract We are applying machine learning and crowdsourcing to cybersecurity

Fink, Eugene

310

High Metal Removal Rate Process for Machining Difficult Materials...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

High Metal Removal Rate Process for Machining Difficult Materials High Metal Removal Rate Process for Machining Difficult Materials highmetalremovalprocessfactsheet.pdf More...

311

Design of a high precision desktop wire electrical discharge machine.  

E-Print Network [OSTI]

??This thesis discusses the design of a wire electrical discharge machine that is small enough to be deemed a desktop machine that achieves sub micron… (more)

Dunlop, David James

2010-01-01T23:59:59.000Z

312

DOE - Office of Legacy Management -- La Pointe Machine and Tool...  

Office of Legacy Management (LM)

La Pointe Machine and Tool Co - MA 16 FUSRAP Considered Sites Site: LA POINTE MACHINE AND TOOL CO. (MA.16 ) Eliminated from consideration under FUSRAP Designated Name: Not...

313

Rapid Compression Machine ? A Key Experimental Device to Effectively...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Rapid Compression Machine A Key Experimental Device to Effectively Collaborate with Basic Energy Sciences Rapid Compression Machine A Key Experimental Device to Effectively...

314

Machine learning based prediction for peptide drift times in...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Machine learning based prediction for peptide drift times in ion mobility spectrometry . Machine learning based prediction for peptide drift times in ion mobility spectrometry ....

315

Parallel machine match-up scheduling with manufacturing cost considerations  

E-Print Network [OSTI]

decisions on parallel CNC machines: -constraint approach.bounding mechanism for the CNC machine scheduling problemsprocessing times is the CNC turning operation where

Aktürk, M. Selim; Atamtürk, Alper; Gürel, Sinan

2010-01-01T23:59:59.000Z

316

Advnaced Power Electronics and Electric Machines (APEEM) R&D...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview Advnaced Power Electronics and Electric Machines (APEEM) R&D Program Overview 2010 DOE Vehicle...

317

Acoustic Emission Mapping of Discharges in Spark Erosion Machining.  

E-Print Network [OSTI]

?? Electrical discharge machining (EDM) is a non-conventional machining process utilizing a series of electrical discharges to melt and vaporize workpiece material. In a wire… (more)

Smith, Craig

2012-01-01T23:59:59.000Z

318

A Machine Approach for Field Weakening of Permanent-Magnet Motors  

SciTech Connect (OSTI)

The commonly known technology of field weakening for permanent-magnet (PM) motors is achieved by controlling the direct-axis current component through an inverter, without using mechanical variation of the air gap, a new machine approach for field weakening of PM machines by direct control of air-gap fluxes is introduced. The demagnetization situation due to field weakening is not an issue with this new method. In fact, the PMs are strengthened at field weakening. The field-weakening ratio can reach 1O:1 or higher. This technology is particularly useful for the PM generators and electric vehicle drives.

Hsu, J.S.

2000-04-02T23:59:59.000Z

319

Electric machine for hybrid motor vehicle  

DOE Patents [OSTI]

A power system for a motor vehicle having an internal combustion engine and an electric machine is disclosed. The electric machine has a stator, a permanent magnet rotor, an uncluttered rotor spaced from the permanent magnet rotor, and at least one secondary core assembly. The power system also has a gearing arrangement for coupling the internal combustion engine to wheels on the vehicle thereby providing a means for the electric machine to both power assist and brake in relation to the output of the internal combustion engine.

Hsu, John Sheungchun (Oak Ridge, TN)

2007-09-18T23:59:59.000Z

320

Switching surface chemistry with supramolecular machines.  

SciTech Connect (OSTI)

Tethered supramolecular machines represent a new class of active self-assembled monolayers in which molecular configurations can be reversibly programmed using electrochemical stimuli. We are using these machines to address the chemistry of substrate surfaces for integrated microfluidic systems. Interactions between the tethered tetracationic cyclophane host cyclobis(paraquat-p-phenylene) and dissolved {pi}-electron-rich guest molecules, such as tetrathiafulvalene, have been reversibly switched by oxidative electrochemistry. The results demonstrate that surface-bound supramolecular machines can be programmed to adsorb or release appropriately designed solution species for manipulating surface chemistry.

Dunbar, Timothy D.; Kelly, Michael James; Jeppesen, Jan O. (University of California, Los Angeles, CA); Bunker, Bruce Conrad; Matzke, Carolyn M.; Stoddart, J. Fraser; Huber, Dale L.; Kushmerick, James G.; Flood, Amar H. (University of California, Los Angeles, CA); Perkins, Julie (University of California, Los Angeles, CA); Cao, Jianguo (University of California, Los Angeles, CA)

2005-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Machine protection system for rotating equipment and method  

DOE Patents [OSTI]

A machine protection system and method for rotating equipment introduces new alarming features and makes use of full proximity probe sensor information, including amplitude and phase. Baseline vibration amplitude and phase data is estimated and tracked according to operating modes of the rotating equipment. Baseline vibration and phase data can be determined using a rolling average and variance and stored in a unit circle or tracked using short term average and long term average baselines. The sensed vibration amplitude and phase is compared with the baseline vibration amplitude and phase data. Operation of the rotating equipment can be controlled based on the vibration amplitude and phase.

Lakshminarasimha, Arkalgud N. (Marietta, GA); Rucigay, Richard J. (Marietta, GA); Ozgur, Dincer (Kennesaw, GA)

2003-01-01T23:59:59.000Z

322

Influences of chip serration on micro-topography of machined surface in high-speed cutting  

Science Journals Connector (OSTI)

Abstract Saw-tooth chip changes from macroscopically continuous ribbon to separated segments with the increase of cutting speed. The aim of this study is to find the correlations between chip morphology and machined surface micro-topography at different chip serration stages encountered in high speed cutting. High strength alloy steel AerMet100 was employed in orthogonal cutting experiments to obtain chips at different serration stages and corresponding machined surfaces. The chips and machined surfaces obtained were then examined with optical microscope (OM), scanning electron microscope (SEM), and white light interferometer (WLI). The result shows that chip serration causes micro-waves on machined surface, which increases machined surface roughness. However, wave amplitudes (surface roughness) at different serration stages are different. The principal factor influencing wave amplitude is the thickness of the sawed segment (tooth) of saw-tooth chip. With cutting parameters in this study, surface roughness contributed by chip serration ranges from 0.39 ?m to 1.85 ?m. This may bring on serious problems in the case of trying to replace grinding with high-speed cutting in rough machining. Some suggestions have been proposed to control the chip serration-caused surface roughness in high-speed cutting based on the results of the current study.

Guosheng Su; Zhanqiang Liu; Liang Li; Bing Wang

2015-01-01T23:59:59.000Z

323

Machine Partitions | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Partitions Mira As our production machine, the queues on Mira are very similar to those on our BG/P system Intrepid. In the prod-capability queue, partition sizes of 8192, 12288, 16384, 32768, and 49152 nodes are available. All partitions have a full torus network. The max runtime of jobs submitted to the

324

Dynamic descriptions : steps towards a design machine  

E-Print Network [OSTI]

This thesis questions which would be a valid approach for building design machine aided by computational intelligence capable of generating surprises for their designers-observers. There have been efforts since the 1960s ...

Toulkeridou, Varvara

2010-01-01T23:59:59.000Z

325

Sandia National Laboratories: Contact Z-Machine  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

About Z Z Research Z News Contact Us Facebook Twitter YouTube Flickr RSS Z-Machine Contact Z For more information, please contact us. * Items are Required First Name * Last Name *...

326

Combined Painting Robot and Spray Painting Machine  

Science Journals Connector (OSTI)

The new Ven Spray Vario is the first system of its kind to combine an anthropomorphic robot with a spray painting machine. The system, which has been ... , brings together the flexibility of an industrial painting

2013-03-01T23:59:59.000Z

327

Machining and Technical Services Service Request Form  

E-Print Network [OSTI]

Machining and Technical Services Service Request Form Clemson University - College of Engineering $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

328

Machining and Technical Services Service Request Form  

E-Print Network [OSTI]

Machining and Technical Services Service Request Form 2010-2011 Clemson University - College: Hours Price per hour Amount $35 $60 $55 $90 $52.50 $82.50 Total Labor EDM Hours Outside Hours Outside EDM Hours Priority -

Duchowski, Andrew T.

329

March 8, 2006: Sandia's Z Machine  

Broader source: Energy.gov [DOE]

March 8, 2006The Department's Sandia National Laboratories announces that its Z machine has produced plasmas that exceed temperatures of 2 billion degrees Kelvin-hotter than the interiors of stars....

330

Improving Statistical Machine Translation with monolingual collocation  

Science Journals Connector (OSTI)

This paper proposes to use monolingual collocations to improve Statistical Machine Translation (SMT). We make use of the collocation probabilities, which are estimated from monolingual corpora, in two aspects, namely improving word alignment for various ...

Zhanyi Liu; Haifeng Wang; Hua Wu; Sheng Li

2010-07-01T23:59:59.000Z

331

Use of virtual machines in information systems  

E-Print Network [OSTI]

This paper presents a scheme using the virtual machine concept for creating: 1) An environment for increasing the effectiveness of researchers who must use analytical, modeling systems and have complex data management ...

Donovan, John J.

1975-01-01T23:59:59.000Z

332

Measure Transformer Semantics for Bayesian Machine Learning  

E-Print Network [OSTI]

Measure Transformer Semantics for Bayesian Machine Learning Johannes Borgstr¨om1, Andrew D. Gordon1 define combinators for measure transformers, based on theorems in measure theory, and use these to give

Plotkin, Joshua B.

333

Teleportation using continuous variable quantum cloning machine  

E-Print Network [OSTI]

We show that an unknown quantum state in phase space can be teleported via three-mode entanglement generated by continuous variable quantum cloning machine (transformation). Further, proceeding with our teleportation protocol we are able to improve the fidelity of teleportation obtained by Loock et.al. [Phys.Rev.Lett. 84, 3482(2000)]. Also we study here the entanglement between the two output copies from cloning machine.

Satyabrata Adhikari

2008-02-15T23:59:59.000Z

334

Method of fabricating a micro machine  

DOE Patents [OSTI]

A micro machine may be in or less than the micrometer domain. The micro machine may include a micro actuator and a micro shaft coupled to the micro actuator. The micro shaft is operable to be driven by the micro actuator. A tool is coupled to the micro shaft and is operable to perform work in response to at least motion of the micro shaft.

Stalford, Harold L

2014-11-11T23:59:59.000Z

335

Machine Learning for Precise Quantum Measurement  

E-Print Network [OSTI]

Adaptive feedback schemes are promising for quantum-enhanced measurements yet are complicated to design. Machine learning can autonomously generate algorithms in a classical setting. Here we adapt machine learning for quantum information and use our framework to generate autonomous adaptive feedback schemes for quantum measurement. In particular our approach replaces guesswork in quantum measurement by a logical, fully-automatic, programmable routine. We show that our method yields schemes that outperform the best known adaptive scheme for interferometric phase estimation.

Alexander Hentschel; Barry C. Sanders

2009-10-05T23:59:59.000Z

336

this version: May 13, 2011 A semantic virtual machine  

E-Print Network [OSTI]

this version: May 13, 2011 A semantic virtual machine Arnold Neumaier Peter Schodl Fakult¨at f://www.mat.univie.ac.at/neum/FMathL Abstract A semantic virtual machine (SVM) is a variant of a programable register machine that combines the transparency and simplicity of the action of a Turing machine with a clearly arranged assembler

Neumaier, Arnold

337

On-Line Machine Covering Yossi Azar1  

E-Print Network [OSTI]

On-Line Machine Covering Yossi Azar1 ,Leah Epstein2 1 Dept. of Computer Science, Tel of scheduling a sequence of jobs to m parallel machines as to maximize the minimum load over the machines. This situation corresponds to a case that a system which consists of the m machines is alive (i.e. productive

Azar, Yossi

338

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS  

E-Print Network [OSTI]

Machine Shop Safety Tips & Safety Guidelines GENERAL SAFETY TIPS · Safety glasses with side shields distance away from moving machine parts, work pieces, and cutters. · Use hand tools for their designed to oil, clean, adjust, or repair any machine while it is running. Stop the machine and lock the power

Veiga, Pedro Manuel Barbosa

339

Semantic Turing machines Arnold Neumaier and Peter Schodl  

E-Print Network [OSTI]

Semantic Turing machines Arnold Neumaier and Peter Schodl Fakultät für Mathematik, Universität Wien be analyzed and proved correct. The classical Turing machine (TM) could be used, but is too inconvenient. This paper introduces a semantic Turing machine (STM), a kind of register machine that combines

Neumaier, Arnold

340

Computing the Recursive Truth Predicate on Ordinal Register Machines  

E-Print Network [OSTI]

Computing the Recursive Truth Predicate on Ordinal Register Machines Peter Koepke1 and Ryan Siders2- storing register machine. This brings us closer to "minimal" computation of set theoretic con from the machine or programming languge. These machines were designed to define and study run

Koepke, Peter

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Tree representations via ordinal machines Philipp Schlicht and Benjamin Seyfferth  

E-Print Network [OSTI]

a subset of 1 2. Similar studies have been carried out for infinite time register machines (ITRMs), whose, we deal with machines that utilize a tape of length and either stop in less than many steps with ordinal Turing machines #12;(OTMs), the machine model introduced in [7]. Let us briefly review the basic

Schlicht, Philipp

342

Advanced monitoring of machining operations  

E-Print Network [OSTI]

Production Based in Open CNC. Proceedings of IMechE Journalseamlessly integrated into the CNC control and provides theEstimation of Tool Wear During CNC Milling Using NN-based

Teti, Roberto; Jemielniak, Krzysztof; O'Donnell, Garret; Dornfeld, David

2010-01-01T23:59:59.000Z

343

Trends in furnace control  

SciTech Connect (OSTI)

This paper relates Italimpianti's experiences over the past few years in the area of control of reheat furnaces for the steel industry. The focus is on the level 1 area; specifically on the use of PLC-based systems to perform both combustion control and mechanical/hydraulic control. Some topics to be discussed are: overview of reheat furnace control system requirements; PLC only control vs separate PLC and DCS systems; PLC hardware requirements; man machine interface (MMI) requirements; purge, light-on and safety logic; implementation of more sophisticated level 1 control algorithms; furnace temperature optimization: look up tables vs full thermal modeling; and recent trends including integrated PLC/DCS system.

McDonald, T.J.; Keefe, M.D. (Italimpianti of America, Inc., Coraopolis, PA (United States). Instrumentation and Controls Dept.)

1993-07-01T23:59:59.000Z

344

12. Turing Machines/Combinations of ffl We claimed that Turing machines are a formal model of  

E-Print Network [OSTI]

12. Turing Machines/Combinations of ffl We claimed that Turing machines are a formal model existed or can ever be built. ffl This lecture justifies this claim by showing how complex machines can will further justify the claim by showing that attempts to generalize Turing machines do not lead to more

Golin, Mordecai J.

345

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 2, FEBRUARY 2008 501 Permanent Magnet Synchronous Machine  

E-Print Network [OSTI]

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, VOL. 55, NO. 2, FEBRUARY 2008 501 Permanent Magnet. The proposed hybrid control scheme is applied to an electrical motor drive composed of an inverter coupled to a perma- nent magnet synchronous machine. An evolution which insures a fixed modulation frequency is also

Paris-Sud XI, Université de

346

Power factor correction of an electrical drive system based on multiphase machines  

E-Print Network [OSTI]

Power factor correction of an electrical drive system based on multiphase machines Khoudir MAROUANI_tabache@yahoo.com Abstract--This paper deals with the energy efficiency improvement of an electrical drive which can be used both in wind energy conversion or motor drive applications. A power factor (PF) control scheme

Paris-Sud XI, Université de

347

Want to help build the tools to make `molecular movies' of protein machines?  

E-Print Network [OSTI]

Want to help build the tools to make `molecular movies' of protein machines? When: Research Research Topic: We are looking for a highly motivated student to help build a state-of-the-art single and instrument control would be highly desirable, but is not required. § A chance to help develop imaging tools

Uppsala Universitet

348

Machine plumbness criteria: Interim technology release  

SciTech Connect (OSTI)

The objective of this technology release is to define the maximum allowable deviation from plumb of the centrifuge machine and to recommend machine installation techniques to achieve the specified criteria. The centrifuge feature used as a reference for plumbness is the casing centerline as defined by a line drawn between the theoretical centers of the top and bottom flange faces. In practice, this measurement is accomplished by using specified casing flange diameters or bolt patterns as the reference points. The criterion adopted for GCEP is that each machine shall be plumb within 0.5 in. over the length of the casing as initially installed. Over a long period of time the plumbness is allowed to degrade to 1.0 in. This standard should be achievable using the currently planned installation techniques and within a time limit consistent with GCEP operational objectives. For development testing, centrifuge machines are meticulously adjusted using a plumb bob to achieve a plumbness with 1/8 in. About one to two days are required to complete the installation. This level of effort is justified for a development machine especially where baseline data is being gathered. A more reasonable standard with a corresponding reduction in installation time is required for GCEP. The specified criteria of 0.5 in. maximum out-of-plumb at time of installation and 1.0 in., ultimate, are believed to be a reasonable compromise. Machine design features or operating modes that are dependent on vertical alignment were examined to assess the impact of the selected plumbness criteria. Machine performance and design requirements are defined in the applicable technology release documents.

Not Available

1987-06-01T23:59:59.000Z

349

T-Mobile and Sierra Wireless agree cooperation in machine-to-machine Sep 01, 2009  

E-Print Network [OSTI]

T-Mobile and Sierra Wireless agree cooperation in machine-to-machine field Sep 01, 2009 · Cooperation intended to achieve further market development with quickly-usable solutions T-Mobile und Sierra their strategic cooperation. The aim is to develop joint portfolios of solutions for the growing M2M (mobile

Deutschmann, Rainer

350

Energy efficient wireless unicast routing alternatives for machine-to-machine networks  

E-Print Network [OSTI]

Review Energy efficient wireless unicast routing alternatives for machine-to-machine networks Neyre into shortest-path based energy-efficient routing alternatives to provide a reference for system designers. Next, a detailed account of energy-efficient unicast routing alternatives, with a particular focus

Uysal-Biyikoglu, Elif

351

A gestalt framework for virtual machine control of automated tools  

E-Print Network [OSTI]

Computer aided design has become affordable and ubiquitous, in part as a result of the development of open source design software and web-based 3D modeling tools. Consequently, a broad spectrum of individuals are expressing ...

Moyer, Ilan Ellison

2013-01-01T23:59:59.000Z

352

Machine Learning for Humanoid Robot Modeling and Control /  

E-Print Network [OSTI]

Name #Joint Actuator Face Barret Arm electric motor N/A Asimo electric motor N/AHubo-2 electric motor actuated realistic face iCub electric

Wu, Tingfan

2013-01-01T23:59:59.000Z

353

Exploring biomolecular machines: energy landscape control of biological reactions  

Science Journals Connector (OSTI)

...dependence of the Green's function matrix on the bridge nuclear coordinates and electronic states. The tunnelling...interactions between the D(A) orbitals and the bridge orbitals and H bridge is the Hamiltonian of isolated bridge system. The...

2006-01-01T23:59:59.000Z

354

Machine Learning for Humanoid Robot Modeling and Control /  

E-Print Network [OSTI]

3.4.4 Multi-Link Robot Arm . . . . . . . . . . . . . . . 3.5Pneumatic actuator and muscle for robot and human arms re-directed reaching by a robot arm. In Biomedical Circuits and

Wu, Tingfan

2013-01-01T23:59:59.000Z

355

Modeling and control of a hot micro-embossing machine  

E-Print Network [OSTI]

As the market for polymer micro- and nano-devices expands there is an ever-present need for a manufacturing standard to mass produce these parts. A number of techniques for fabricating these devices are soft lithography, ...

Shoji, Grant T. (Grant Tatsuo)

2006-01-01T23:59:59.000Z

356

Meso-scale machining capabilities and issues  

SciTech Connect (OSTI)

Meso-scale manufacturing processes are bridging the gap between silicon-based MEMS processes and conventional miniature machining. These processes can fabricate two and three-dimensional parts having micron size features in traditional materials such as stainless steels, rare earth magnets, ceramics, and glass. Meso-scale processes that are currently available include, focused ion beam sputtering, micro-milling, micro-turning, excimer laser ablation, femto-second laser ablation, and micro electro discharge machining. These meso-scale processes employ subtractive machining technologies (i.e., material removal), unlike LIGA, which is an additive meso-scale process. Meso-scale processes have different material capabilities and machining performance specifications. Machining performance specifications of interest include minimum feature size, feature tolerance, feature location accuracy, surface finish, and material removal rate. Sandia National Laboratories is developing meso-scale electro-mechanical components, which require meso-scale parts that move relative to one another. The meso-scale parts fabricated by subtractive meso-scale manufacturing processes have unique tribology issues because of the variety of materials and the surface conditions produced by the different meso-scale manufacturing processes.

BENAVIDES,GILBERT L.; ADAMS,DAVID P.; YANG,PIN

2000-05-15T23:59:59.000Z

357

Multilevel-Dc-Bus Inverter For Providing Sinusoidal And Pwm Electrical Machine Voltages  

DOE Patents [OSTI]

A circuit for controlling an ac machine comprises a full bridge network of commutation switches which are connected to supply current for a corresponding voltage phase to the stator windings, a plurality of diodes, each in parallel connection to a respective one of the commutation switches, a plurality of dc source connections providing a multi-level dc bus for the full bridge network of commutation switches to produce sinusoidal voltages or PWM signals, and a controller connected for control of said dc source connections and said full bridge network of commutation switches to output substantially sinusoidal voltages to the stator windings. With the invention, the number of semiconductor switches is reduced to m+3 for a multi-level dc bus having m levels. A method of machine control is also disclosed.

Su, Gui-Jia [Knoxville, TN

2005-11-29T23:59:59.000Z

358

RHIC Machine/Detector Planning Meetings  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

RHIC Machine/Detector Planning Meeting RHIC Machine/Detector Planning Meeting RHIC STAR PHENIX RHIC STAR PHENIX BNL Home Page C-AD Home Page C-AD ES&F Division BNL Physics Department RHIC Run History Super Conducting Magnet Division Run 14 Scheduling Physicist Home Page NPP PAC Run 13 Recommendations CAD Power Run 11-Run 13 Off-line CNI Polarization Results APEX for Run 13 RHIC Machine/Detector Meetings for Run 12 FY02-Present C-AD Energy Use Plots Cryo Power Run 11-Run 13 H-jet Target Results APEX Nov. 19-20, 2012 Workshop for Run 13 RHIC Run 13 Run Home Page (pp) FY10-Present BNL Energy Use Plot Cryo Temperatures Latest Luminosity Plots BNL Current Energy Use (BNL Intranet only and requires password) RHIC Retreat 2012

359

Machine Overview | Argonne Leadership Computing Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

BG/Q Drivers Status Machine Overview Machine Partitions Torus Network Data Storage & File Systems Compiling & Linking Queueing & Running Jobs Data Transfer Debugging & Profiling Performance Tools & APIs Software & Libraries IBM References Intrepid/Challenger/Surveyor Tukey Eureka / Gadzooks Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Machine Overview Blue Gene /Q systems are composed of login nodes, I/O nodes, and compute nodes. Login Nodes Login and compile nodes are IBM Power 7-based systems running Red Hat Linux and are the user's interface to a Blue Gene/Q system. This is where users login, edit files, compile, and submit jobs. These are shared resources

360

An introduction to quantum machine learning  

E-Print Network [OSTI]

Machine learning algorithms learn a desired input-output relation from examples in order to interpret new inputs. This is important for tasks such as image and speech recognition or strategy optimisation, with growing applications in the IT industry. In the last couple of years, researchers investigated if quantum computing can help to improve classical machine learning algorithms. Ideas range from running computationally costly algorithms or their subroutines efficiently on a quantum computer to the translation of stochastic methods into the language of quantum theory. This contribution gives a systematic overview of the emerging field of quantum machine learning. It presents the approaches as well as technical details in an accessable way, and discusses the potential of a future theory of quantum learning.

M. Schuld; I. Sinayskiy; F. Petruccione

2014-09-10T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Multi-winding homopolar electric machine  

DOE Patents [OSTI]

A multi-winding homopolar electric machine and method for converting between mechanical energy and electrical energy. The electric machine includes a shaft defining an axis of rotation, first and second magnets, a shielding portion, and a conductor. First and second magnets are coaxial with the shaft and include a charged pole surface and an oppositely charged pole surface, the charged pole surfaces facing one another to form a repulsive field therebetween. The shield portion extends between the magnets to confine at least a portion of the repulsive field to between the first and second magnets. The conductor extends between first and second end contacts and is toroidally coiled about the first and second magnets and the shield portion to develop a voltage across the first and second end contacts in response to rotation of the electric machine about the axis of rotation.

Van Neste, Charles W

2012-10-16T23:59:59.000Z

362

New Accessory for Cleaning the Inside of the Machine Tool Cavity  

SciTech Connect (OSTI)

The best way to extend the life of a metalworking fluid (MWF) is to make sure the machine tool and MWF delivery system are properly cleaned at least once per year. The dilemma the MWF manager is faced with is: How does one clean the machine tool and the MWF system on a large machine tool with an enclosure in a timely manner without impacting production schedules? Remember the walls and roof of the machine enclosure are coated with a film of dried contaminated MWF that must also be removed. If not removed, the deposits on these surfaces can recontaminate the fresh charge of MWF. I have found a product that with this revised procedure helps to shorten the machine tool down time involved with machine cleaning. (1) Discuss with your MWF supplier if they have a machine cleaning product that can be used with your current water based MWF during normal machining operations. Most MWF manufacturers have a machine cleaner that can be used at a lower concentration (1-2% vs. 5%) and can be used while still making production parts for a short period of time (usually 24-48 hours). (2) Make sure this machine cleaner is compatible with the work-piece material you are machining into product. Most cleaners are compatible with ferrous alloys. Because of the increased alkalinity of the fluid you might experience staining if you are machining copper or aluminum alloys. (3) Remove the chips from the chips pans and fluid channels. (4) During off shift hours circulate the MWF using a new product marketed by Rego-Fix called a 'Hydroball'. This device has a 5/8 inch diameter straight shank which allows it to be installed in any collet or solid quick change tool holder. It has multiple nozzles so that the user can control the spray pattern generated when the MWF is circulated. It allows the user to utilize the high pressure, through spindle MWF delivery capability of your machine tool for cleaning purposes. The high pressure MWF system can now be effectively used for cleaning purposes. This will also work with standard pressure system but you must reduce the number of nozzles utilized. By combining the movement of the machine axis around the operating envelope and the MWF circulation you can do a reasonably effective job of washing the inside of the machine tool operating cavity. Way covers will be moved and surfaces exposed because of axis movement. Spray direction will change to better wash fixtures and machine tool components. Deposits will start to breakdown and be washed into the machine tool sump. Since the cycle will run four or more hours it can be done with a weaker cleaning solution. The distributor states that the unit can be rotated up to 50 RPM. When running it has the same effect as the washing rotor inside of your home dishwasher. Inside the cavity on a machining center there is a lot of splash. During normal operations, MWF deposits buildup on the walls and roof of the enclosures. If these deposits (containing bacteria, mold and other contaminants) are not removed they will inoculate the fresh charge of MWF when they are resaturated. When you clean the inside of machine tool cavity, time is spent removing these deposits on the walls and roof of the enclosure. Getting to these surfaces is very difficult usually requiring that a member of the cleaning crew get inside the machine tool to reach them. The Hydro ball is effective in distributing the cleaning solution on all surfaces of the enclosure under high pressure. The only negative we have found is you get to find all the gaps and leaks in your machine tool enclosure. By running the hydro ball with the machine cleaner enriched MWF during off shift (4-8 hours) you can effectively remove these deposits and buildups on the internal surfaces of the cavity of the machine tool and wash them down into the sump. You also clean the internal components of the MWF system without interrupting normal scheduled work. (5) Pump out the spent MWF. You will have found that most of the deposits have been washed from the internal surfaces of the enclosure. For extremely dirty machines you might have to

Lazarus, Lloyd

2009-04-21T23:59:59.000Z

363

Electric machine and current source inverter drive system  

SciTech Connect (OSTI)

A drive system includes an electric machine and a current source inverter (CSI). This integration of an electric machine and an inverter uses the machine's field excitation coil for not only flux generation in the machine but also for the CSI inductor. This integration of the two technologies, namely the U machine motor and the CSI, opens a new chapter for the component function integration instead of the traditional integration by simply placing separate machine and inverter components in the same housing. Elimination of the CSI inductor adds to the CSI volumetric reduction of the capacitors and the elimination of PMs for the motor further improve the drive system cost, weight, and volume.

Hsu, John S

2014-06-24T23:59:59.000Z

364

Apparatus for cooling an electric machine  

DOE Patents [OSTI]

Provided is an apparatus, for example, for use with a rotating electric machine, that includes a housing. The housing can include a housing main portion and a housing end portion. The housing main portion can be configured to be disposed proximal to a body portion of a stator section of an electric machine. The housing main portion can define a main fluid channel that is configured to conduct fluid therethrough. The housing end portion can receive fluid from said main fluid channel and direct fluid into contact with a winding end portion of a conductive winding of the stator section.

Palafox, Pepe; Gerstler, William Dwight; Shen, Xiaochun; El-Refaie, Ayman Mohamed Fawzi; Lokhandwalla, Murtuza; Salasoo, Lembit

2013-07-16T23:59:59.000Z

365

Quantum thermal machines with single nonequilibrium environments  

E-Print Network [OSTI]

We propose a scheme for a quantum thermal machine made by atoms interacting with a single non-equilibrium electromagnetic field. The field is produced by a simple configuration of macroscopic objects held at thermal equilibrium at different temperatures. We show that these machines can deliver all thermodynamic tasks (cooling, heating and population inversion), and this by establishing quantum coherence with the body on which they act. Remarkably, this system allows to reach efficiencies at maximum power very close to the Carnot limit, much more than in existing models. Our findings offer a new paradigm for efficient quantum energy flux management, and can be relevant for both experimental and technological purposes.

Bruno Leggio; Bruno Bellomo; Mauro Antezza

2015-01-08T23:59:59.000Z

366

Heat resources and organic Rankine cycle machines  

Science Journals Connector (OSTI)

Abstract Various Rankine cycle architectures for single fluids and other improved versions operating with ammonia/water mixture are presented in this paper. Untapped heat resources and their potential for driving organic Rankine cycles are outlined. The nature – state and temperature of the heat source significantly influences the choice of the type of organic Rankine cycle machine. The temperature appears as a critical parameter during the selection process. Modules differ from one another from technology, size and cost viewpoints. The investment cost of an ORC project includes machine, engineering, system integration, capital costs, etc. and is closely linked to the application.

Bertrand F. Tchanche; M. Pétrissans; G. Papadakis

2014-01-01T23:59:59.000Z

367

20140430_Green Machine Florida Canyon Hourly Data  

SciTech Connect (OSTI)

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

Thibedeau, Joe

2014-05-05T23:59:59.000Z

368

Green Machine Florida Canyon Hourly Data 20130731  

SciTech Connect (OSTI)

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

Vanderhoff, Alex

2013-08-30T23:59:59.000Z

369

20130416_Green Machine Florida Canyon Hourly Data  

SciTech Connect (OSTI)

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

Vanderhoff, Alex

2013-04-24T23:59:59.000Z

370

Green Machine Florida Canyon Hourly Data  

SciTech Connect (OSTI)

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

Vanderhoff, Alex

2013-07-15T23:59:59.000Z

371

Green Machine Florida Canyon Hourly Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 6/1/13 to 6/30/13

Vanderhoff, Alex

372

20130416_Green Machine Florida Canyon Hourly Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 4/16/13.

Vanderhoff, Alex

373

20140430_Green Machine Florida Canyon Hourly Data  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 01 April to 30 April 2014.

Thibedeau, Joe

374

Green Machine Florida Canyon Hourly Data 20130731  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Employing innovative product developments to demonstrate financial and technical viability of producing electricity from low temperature geothermal fluids, coproduced in a mining operation, by employing ElectraTherm's modular and mobile heat-to-power "micro geothermal" power plant with output capacity expected in the 30-70kWe range. The Green Machine is an Organic Rankine Cycle power plant. The Florida Canyon machine is powered by geothermal brine with air cooled condensing. The data provided is an hourly summary from 7/1/13 to 7/31/13.

Vanderhoff, Alex

375

A machine learning framework for classifying invulnerabilites [sic] and predicting exploitability  

E-Print Network [OSTI]

Flow . . . 15 Chapter 4 Using Machine Learning for Classi?cation . . . 4.1 Supervised Machine Learning Approach . .with Kernels: Support Vector Machines, Regularization,

Bozorgi, Mehran

2009-01-01T23:59:59.000Z

376

Machine Assistance in Collection Building: New Tools, Research, Issues and Reflections  

E-Print Network [OSTI]

www.jaist.ac.jp/~tajima/ Machine assistance in collectionInternational Conference on Machine Learning (2004), http://International Conference on Machine Learning (Menlo Park

Mitchell, Steve

2006-01-01T23:59:59.000Z

377

Review: Paper Machines: About Cards & Catalogs, 1548-1929 by Markus Krajewski  

E-Print Network [OSTI]

Paper Machines: About Cards & Catalogs, 1548-1929, by MarkusKrajewski, author of Paper Machines: About Cards & Catalogs,the prototypical universal machine defined by Alan Turing,

Currie, Morgan

2013-01-01T23:59:59.000Z

378

Support vector machines improve the accuracy of evaluation for the performance of laparoscopic training tasks  

E-Print Network [OSTI]

009-0556-6 Support vector machines improve the accuracy ofand support vector machine [SVM]) were compared. Theevaluation Á Support vector machines Á Training B. Allen (&)

Allen, Brian; Nistor, Vasile; Dutson, Erik; Carman, Greg; Lewis, Catherine; Faloutsos, Petros

2010-01-01T23:59:59.000Z

379

Solution of inverse dynamics problems for contour error minimization in CNC machines  

E-Print Network [OSTI]

metal cut- ting mechanics, machine tool vibrations, and CNCerror minimization in CNC machines Charlie A. Ernesto · RidaAbstract For CNC machines governed by typical feed- back

Ernesto, Charlie A.; Farouki, Rida T.

2010-01-01T23:59:59.000Z

380

A Numerical Comparison of Rule Ensemble Methods and Support Vector Machines  

E-Print Network [OSTI]

tutorial on support vector machines for pattern recognition.for support vector machines. Computer Science Dept. ,Methods and Support Vector Machines Juan Meza ? Mark Woods †

Meza, Juan C.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Design and Certification of Industrial Predictive Controllers  

E-Print Network [OSTI]

.g. a car moving over a terrain with changing slopes. Many others can be viewed as a composition of interacting subsystems like harvester machines, wind mills etc. Further in this thesis, practical solutions for controlling such nonlinear and distributed...

Dutta, Abhishek

2014-09-24T23:59:59.000Z

382

Automatic Control Laboratory ETH, Zurich  

E-Print Network [OSTI]

Automatic Control Laboratory ETH, Z¨urich Physikstrasse 3 8092 Z¨urich, Switzerland +41 44 632 22 from the airport to Z¨urich city and goes directly past ETH. There are ticket machines outside 71 How to get to the Automatic Control Laboratory (IfA) From the Z¨urich airport: · By Taxi. Taxi

Lygeros, John

383

CSP Theorems for Communicating B Machines  

E-Print Network [OSTI]

CSP Theorems for Communicating B Machines Steve Schneider and Helen Treharne Technical Report CSD #12;#12;Introduction 1 Abstract. Recent work on combining CSP and B has provided ways of describing sys- tems comprised of components described in both B (to express requirements on state) and CSP (to

Doran, Simon J.

384

Determination of sound power of coupled machines  

Science Journals Connector (OSTI)

Several procedures are available for the determination of the sound power level of machines in normal environments. Most of these give adequate results for single medium?sized equipment but difficulties arise in extending the concepts to large coupled machines. [“Evaluation of Proposed ASME PTC 36 Code for Sound Power Level Determination of Large Steam Turbine Generators ” S.E. Grabkowski J. MacDonald and T. Van Schaick (General Electric Company) to be presented at Fall 1975 ASME meeting.] Much of the problem is because the direct acoustic field of a component machine may not extend to as much as one foot from its surface due to reverberation from other components. A procedure is suggested in which all acoustic measurements are confined to surfaces near each component machine. Correction is made for the reverberant acoustic field of the entire environment. The correction procedure utilizes reverberation time determinations from impulsive noise tests; and applies a Monte Carlo approach to the problem of correcting for nearfield effects in the evaluation of sound power. An iterative computation is employed. Comparisons with free?field sound power determinations are shown.

R. J. Wells

1975-01-01T23:59:59.000Z

385

ARTIGO INTERNET 1. Lisbon Machine Learning School  

E-Print Network [OSTI]

University (CMU); Slav Petrov, da Google Inc. USA; Koby Crammer, do Israel Institute of Technology; Mário (machine learning, em inglês) tem vindo a assumir na investigação com vista à criação de soluções para o

Instituto de Sistemas e Robotica

386

Direct fired absorption machine flue gas recuperator  

DOE Patents [OSTI]

A recuperator which recovers heat from a gas, generally the combustion gas of a direct-fired generator of an absorption machine. The recuperator includes a housing with liquid flowing therethrough, the liquid being in direct contact with the combustion gas for increasing the effectiveness of the heat transfer between the gas and the liquid.

Reimann, Robert C. (Lafayette, NY); Root, Richard A. (Spokane, WA)

1985-01-01T23:59:59.000Z

387

Design of a frozen fruit smoothie machine  

E-Print Network [OSTI]

A smoothie machine known as the FruziFridge is being deterministically designed to dispense frozen fruit smoothies. The design is scalable so it can be made available in homes as a built-in module of a refrigerator or in ...

Toussaint, Teddy A. (Teddy Antoine)

2013-01-01T23:59:59.000Z

388

Gravitational dispersion in a torsional wave machine  

E-Print Network [OSTI]

We demonstrate that mechanical waves traveling in a torsional, mechanical wave machine exhibit dispersion due to gravity and the discreteness of the medium. We also show that although the dispersion due to discreteness is negligible, the dispersion due to gravity can be easily measured, and can be shown to disappear in a zero-gravity environment.

Rafael de la Madrid; Alejandro Gonzalez; George Irwin

2014-09-01T23:59:59.000Z

389

A novel capillary polymerase chain reaction machine  

E-Print Network [OSTI]

I built a novel prototype capillary polymerase chain reaction machine. The purpose was to perform a single reaction as fast as possible with a reaction volume - 100 nl. The PCR mix is in the form of a 1 /1 droplet that ...

Chiou, Jeffrey Tsungshuan

2001-01-01T23:59:59.000Z

390

Multiple phase estimation in quantum cloning machines  

E-Print Network [OSTI]

Since the initial discovery of the Wootters-Zurek no-cloning theorem, a wide variety of quantum cloning machines have been proposed aiming at imperfect but optimal cloning of quantum states within its own context. Remarkably, most previous studies have employed the Bures fidelity or the Hilbert-Schmidt norm as the figure of merit to characterize the quality of the corresponding cloning scenarios. However, in many situations, what we truly care about is the relevant information about certain parameters encoded in quantum states. In this work, we investigate the multiple phase estimation problem in the framework of quantum cloning machines, from the perspective of quantum Fisher information matrix (QFIM). Focusing on the generalized d-dimensional equatorial states, we obtain the analytical formulas of QFIM for both universal quantum cloning machine (UQCM) and phase-covariant quantum cloning machine (PQCM), and prove that PQCM indeed performs better than UQCM in terms of QFIM. We highlight that our method can be generalized to arbitrary cloning schemes where the fidelity between the single-copy input and output states is input-state independent. Furthermore, the attainability of the quantum Cramer-Rao bound is also explicitly discussed.

Yao Yao; Li Ge; Xing Xiao; Xiao-guang Wang; Chang-pu Sun

2014-07-22T23:59:59.000Z

391

The Machine Learning and Traveling Repairman Problem  

E-Print Network [OSTI]

The goal of the Machine Learning and Traveling Repairman Problem (ML&TRP) is to determine a route for a “repair crew,” which repairs nodes on a graph. The repair crew aims to minimize the cost of failures at the nodes, but ...

Tulabandhula, Theja

392

Handbook of Research on Machine Learning  

E-Print Network [OSTI]

Handbook of Research on Machine Learning Applications and Trends: Algorithms, Methods of the trademark or registered trademark. Library of Congress Cataloging-in-Publication Data Handbook of research and complex data point cloud. ABStrAct In many physical, statistical, biological and other investigations

393

HEART SMART NUTRITION Be a Lean Machine  

E-Print Network [OSTI]

Lesson 6 HEART SMART NUTRITION Be a Lean Machine This Heart Smart Nutrition series can help you Heart, Lung and Blood Institute). Physical activity increases your metabolic rate, which helps to burn more calories. Plus it helps the heart and lungs function to full capacity. Exercise also helps raise

394

PC(Note PC catalogue) (Machine body)  

E-Print Network [OSTI]

Specifications PC PC Code Image Brand Model PC Kingsoft Office Plus () ESET SMART () Kingsoft Office Microsoft Wireless LAN Remarks Specifications PC PC Code Image Brand Model K012 Fujitsu LOOK FMVLR7YN24 Core2DUO Weight (Machine body) Accessory LAN Wireless LAN Remarks Specifications PC PC Code Image Brand

Katsumoto, Shingo

395

CollageMachine: Model of ``Interface Ecology''  

E-Print Network [OSTI]

CollageMachine: Model of ``Interface Ecology'' By Andruid Kerne dissertation submitted partial addresses browsing creatively, been co­developed with the metadisciplinary framework interface ecology, in addition inside them, open process without definite bounds. a metadiscipline, interface ecology brings

Mohri, Mehryar

396

Simulation of the electrochemical machining process  

SciTech Connect (OSTI)

An algorithm for simulating a two-dimensional electrochemical machining process is presented. A major part of the calculation, the solution of Laplace's equation, is accomplished by a boundary element method based upon Green's formula. Polarization, in the form of the Tafel equation, is included in the model. The computer program is discussed in detail.

Gray, L.J.; Serbin, C.A.; Dietrich, W.C.

1984-11-01T23:59:59.000Z

397

Chemical implementation of finite-state machines  

Science Journals Connector (OSTI)

...can be implemented chemically by the use of an autonomously oscillating catalyst E. We assume that E oscil- lates in a nonsinusoidal...species of neurons 1 and 2. A binary number is represented as a string of digits presented to the machine sequentially in time with...

A Hjelmfelt; E D Weinberger; J Ross

1992-01-01T23:59:59.000Z

398

Electric Machine R&D | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Machine R&D Electric Machine R&D Presentation from the U.S. DOE Office of Vehicle Technologies "Mega" Merit Review 2008 on February 25, 2008 in Bethesda, Maryland....

399

Prédiction des conflits dans des systčmes homme-machine.  

E-Print Network [OSTI]

??Prédiction des conflits dans le systčmes homme-machine. Le travail fait partie de la recherche consacrée ŕ des problčmes d'interaction homme-machine et aux conflits entre l'homme… (more)

Pizziol, Sergio

2013-01-01T23:59:59.000Z

400

Curvature gouge detection and prevention in 5-axis CNC machining.  

E-Print Network [OSTI]

??Five-axis CNC machining presents high efficiency and unparallel flexibility in the machining of complex curved surfaces. However, generation of gouge-free CNC tool path and cutter… (more)

Wang, Yin Jack

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

DOE - Office of Legacy Management -- American Machine and Foundry...  

Office of Legacy Management (LM)

the former American Machine & Foundry Co. site; January 6, 1995 VA.06-3 - AEC Letter; Johnson to American Machine & Foundry Company; concerning Source Material License No. C-3635;...

402

Sandia gives Japanese elected official a tour of Z machine |...  

National Nuclear Security Administration (NNSA)

tour of Z machine Sandia recently hosted Yasuyuki Kaneko, a Sapporo city councilor from Japan, to provide an understanding the importance of the work done at the Z machine and to...

403

Order Acceptance and Scheduling Problem in Two-machine Flow ...  

E-Print Network [OSTI]

Jul 29, 2014 ... Order Acceptance and Scheduling Problem in Two-machine Flow Shops: New Mixed Integer Programming Formulations.

Rasul Esmaeilbeigi

2014-07-29T23:59:59.000Z

404

Covered Product Category: Water-Cooled Ice Machines  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance and federal efficiency requirements for water-cooled ice machines.

405

Comment on "Efficiency of Isothermal Molecular Machines at Maximum Power"  

E-Print Network [OSTI]

Comment on "Efficiency of Isothermal Molecular Machines at Maximum Power" (PRL 108, 210602 (2012), arXiv:1201.6396)

Yunxin Zhang

2012-06-06T23:59:59.000Z

406

1000–ton testing machine for cyclic fatigue tests of materials at liquid nitrogen temperatures  

SciTech Connect (OSTI)

One of the main tasks of superconductive magnets R and D is to determine the mechanical and fatigue properties of structural materials and the critical design elements in the cryogenic temperature range. This paper describes a new facility built based on the industrial 1000-ton (10 MN) testing machine Schenk PC10.0S. Special equipment was developed to provide the mechanical and cyclic tensile fatigue tests of large-scale samples at the liquid nitrogen temperature and in a given load range. The main feature of the developed testing machine is the cryostat, in which the device converting a standard compression force of the testing machine to the tensile force affected at the test object is placed. The control system provides the remote control of the test and obtaining, processing and presentation of test data. As an example of the testing machine operation the test program and test results of the cyclic tensile fatigue tests of fullscale helium inlet sample of the PF1 coil ITER are presented.

Khitruk, A. A.; Klimchenko, Yu. A.; Kovalchuk, O. A.; Marushin, E. L.; Mednikov, A. A.; Nasluzov, S. N.; Privalova, E. K.; Rodin, I. Yu.; Stepanov, D. B.; Sukhanova, M. V. [The D.V. Efremov Scientific Research Institute of Electrophysical Apparatus (NIIEFA), 3 Doroga na Metallostroy, Metallostroy, Saint Petersburg 196641 (Russian Federation)

2014-01-29T23:59:59.000Z

407

Towards an Algebraic Speci cation of the Java Virtual Machine  

E-Print Network [OSTI]

Towards an Algebraic Speci cation of the Java Virtual Machine K Stephenson Department of Computer of the architecture of an abstract and simpli ed version of the Java Virtual Machine JVM. This concentration on the implementation-independent features of the machine allows us to build a clean and easily comprehensible model

Grant, P. W.

408

Technical and Cost Assessment of the PCAST Machine  

E-Print Network [OSTI]

Technical and Cost Assessment of the PCAST Machine Final Report PCAST ITER Volume II Chapter 4 an ignition-moderate-burn device smaller and less costly than ITER, the costing for this machine is presented ITER merely used fixed numbers or the data was considered more representative of the PCAST machine

409

Kernel Machine Based Feature Extraction Algorithms for Regression Problems  

E-Print Network [OSTI]

Kernel Machine Based Feature Extraction Algorithms for Regression Problems Csaba Szepesv´ari 1 and Andr´as Kocsor and Korn´el Kov´acs 2 Abstract. In this paper we consider two novel kernel machine based performance of the algorithm. The second algo- rithm combines kernel machines with average derivative

Szepesvari, Csaba

410

72 09-2011 elektor The Chaos Machine  

E-Print Network [OSTI]

72 09-2011 elektor retronics The Chaos Machine Analogue computing rediscovered (1) For some of us reliability. Analogue computers are machines that are built to behave as the system we want to compute. They are powerful and engaging computing machines that are cheap and simple to build. This two-part Retronics

Ambaum, Maarten

411

Machine Learning for Market Microstructure and High Frequency Trading  

E-Print Network [OSTI]

Machine Learning for Market Microstructure and High Frequency Trading Michael Kearns Yuriy Nevmyvaka 1 Introduction In this chapter, we overview the uses of machine learning for high frequency trading and market microstructure data and problems. Machine learning is a vibrant subfield of computer

Plotkin, Joshua B.

412

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker  

E-Print Network [OSTI]

Incremental Machine Descriptions for GCC Sameera Deshpande Uday P. Khedker Indian Institute of Technology, Bombay {sameera,uday}@cse.iitb.ac.in Abstract The mechanism of providing machine descriptions a GCC port exists. However, this mechanism is quite ad hoc and the machine descriptions are dif- ficult

Khedker, Uday

413

Technical Documentation for System Center 2012 Virtual Machine  

E-Print Network [OSTI]

#12; Technical Documentation for System Center 2012 ­ Virtual Machine Manager VMM Information Experience Team Summary: Virtual Machine Manager (VMM) is a management solution resources in order to create and deploy virtual machines and services to private clouds that you have

Hunt, Galen

414

Turing Machine as an ecological model for Task Analysis  

E-Print Network [OSTI]

1 Turing Machine as an ecological model for Task Analysis Thierry Morineau, Emmanuel Frénod model is based on the Turing Machine formalism and takes into account the variety of situations that can opening a door. Keywords: Cognitive work analysis, task analysis, Turing machine, affordance #12;3 1

Frénod, Emmanuel

415

Department of Mechanical Engineering Spring 2010 Bipedal Machine  

E-Print Network [OSTI]

PENNSTATE Department of Mechanical Engineering Spring 2010 Bipedal Machine Overview The Spring 2010 group inherited a bipedal machine structure capable of withstanding static loading, but not dynamic times the machine weight) in several different loading orientations. The group made exctensive use

Demirel, Melik C.

416

Towards an Algebraic Specification of the Java Virtual Machine  

E-Print Network [OSTI]

Towards an Algebraic Specification of the Java Virtual Machine K Stephenson Department of Computer of the architecture of an abstract and simplified version of the Java Virtual Machine (JVM). This concentration on the implementation­independent features of the machine allows us to build a clean and easily comprehensible model

Grant, P. W.

417

MACHINE LEARNING AND MAPPING ALGORITHMS APPLIED TO PROTEOMICS PROBLEMS  

E-Print Network [OSTI]

MACHINE LEARNING AND MAPPING ALGORITHMS APPLIED TO PROTEOMICS PROBLEMS By William Shane Sanders;MACHINE LEARNING AND MAPPING ALGORITHMS APPLIED TO PROTEOMICS PROBLEMS By William Shane Sanders Approved Title of Study: MACHINE LEARNING AND MAPPING ALGORITHMS APPLIED TO PROTEOMICS PROBLEMS Pages in Study

Ray, David

418

Is Machine Learning the Wrong Name? Xiaojin Zhu  

E-Print Network [OSTI]

Is Machine Learning the Wrong Name? Xiaojin Zhu Department of Computer Sciences University of Wisconsin-Madison October 2010 (University of Wisconsin) Is Machine Learning the Wrong Name? 1 / 33 #12;Iris Learns "Cow" (University of Wisconsin) Is Machine Learning the Wrong Name? 2 / 33 #12;Iris Learns "Cow

Zhu, Xiaojin "Jerry"

419

Online Load Balancing for Related Machines 1 Piotr Berman  

E-Print Network [OSTI]

), the load of a machine i in schedule s and Load(s), the load of entire schedule s as follows: load(s; i) = 1On­line Load Balancing for Related Machines 1 Piotr Berman The Pennsylvania State University of randomized algorithms for this problem. Key Words: on­line algorithm, load balancing, related machines

Charikar, Moses

420

Human versus Machine in the Topic Distillation Task Mingfang Wu  

E-Print Network [OSTI]

Human versus Machine in the Topic Distillation Task Mingfang Wu 1 , Gheorghe Muresan2 , Alistair Mc. The focus is on comparing humans and machine algorithms in terms of performance in a topic distillation task demonstrated that machines can perform nearly as well as people on the topic distillation task. Given a system

Wu, Mingfang

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Improving the Accuracy and Speed of Support Vector Machines  

E-Print Network [OSTI]

Improving the Accuracy and Speed of Support Vector Machines Chris J.C. Burges Bell Laboratories bs@mpik-tueb.mpg.de Abstract Support Vector Learning Machines (SVM) are nding application in pattern to achieve a factor of fty speedup in test phase over the virtual support vector machine. The combined

422

Support Vector Machines for Differential Finn Kuusisto1  

E-Print Network [OSTI]

Support Vector Machines for Differential Prediction Finn Kuusisto1 , Vitor Santos Costa2 , Houssam, Madison, WI, USA 2 University of Porto, Porto, Portugal 3 Amazon, Seattle, WA, USA Abstract. Machine medical applications and show excellent results. Keywords: support vector machine, uplift modeling 1

Page Jr., C. David

423

Abstract geometrical computation 4: small Turing universal signal machines  

E-Print Network [OSTI]

Abstract geometrical computation 4: small Turing universal signal machines J´er^ome Durand provides several very small signal machines able to perform any compu- tation --in the classical understanding-- generated from Turing machines, cellular automata and cyclic tag systems. A halting universal

Paris-Sud XI, Université de

424

ON THE CONFIGURATION-LP FOR SCHEDULING ON UNRELATED MACHINES  

E-Print Network [OSTI]

ON THE CONFIGURATION-LP FOR SCHEDULING ON UNRELATED MACHINES JOSĂ? VERSCHAE AND ANDREAS WIESE Abstract. One of the most important open problems in machine scheduling is the problem of scheduling a set of jobs on unrelated machines to minimize the makespan. The best known approximation algorithm

Nabben, Reinhard

425

Improved core promoter prediction using ensembles of support vector machines  

E-Print Network [OSTI]

Improved core promoter prediction using ensembles of support vector machines Introduction to locate the core promoter region, or even more specific: where the transcription of a gene starts. Machine is very difficult to model in e.g. support vector machines (SVM) as there is so little positive

Gent, Universiteit

426

Expressive Power and Approximation Errors of Restricted Boltzmann Machines  

E-Print Network [OSTI]

#12;Expressive Power and Approximation Errors of Restricted Boltzmann Machines Guido F. Montufar1 Boltzmann Machines (RBMs) depending on the number of units that they contain, and which are representative Machine (RBM) [23, 10] is a learning system con- sisting of two layers of binary stochastic units

427

Technical Report No. 2006-510 ACCELERATING MACHINES  

E-Print Network [OSTI]

Technical Report No. 2006-510 ACCELERATING MACHINES Robert Fraser and Selim G. Akl School Abstract This paper presents an overview of accelerating machines. We begin by exploring the history of the accelerating machine model and the potential power that it provides. We look at some of the problems that could

Graham, Nick

428

www.cambridge.org/us/9780521194280 Molecular Machines in  

E-Print Network [OSTI]

www.cambridge.org/us/9780521194280 Molecular Machines in Biology Workshop of the Cell Joachim Frank Columbia University, New York About the Book The concept of molecular machines in biology has transformed, translation, protein folding, and protein degradation, are all carried out by molecular machines. This volume

Grishok, Alla

429

A Functional Correspondence between Evaluators and Abstract Machines  

E-Print Network [OSTI]

A Functional Correspondence between Evaluators and Abstract Machines Mads Sig Ager, Dariusz machine from an ordinary call-by-name evaluator and by deriving an ordinary call-by-value evaluator from Felleisen et al.'s CEK-machine. The first derivation is strikingly simpler than what can be found

Hutton, Graham

430

System/370 Extended Architecture: Facilities for Virtual Machines  

E-Print Network [OSTI]

p. H. Gum System/370 Extended Architecture: Facilities for Virtual Machines This paper describes the evolution of facilities for virtual machines on IBM System/370 computers, and presents the elements of a new architectural facility designed for the virtual-machine environment. Assists that have been added to various

Yang, Junfeng

431

DBA-VM: Dynamic Bandwidth Allocator for Virtual Machines  

E-Print Network [OSTI]

DBA-VM: Dynamic Bandwidth Allocator for Virtual Machines Ahmed Amamou, Manel Bourguiba, Kamel for Virtual Machines with regard to the established SLAs. The proposed scheme enforces the isolation between the virtual machines through the transmission bandwidth adjustment at the network I/O channel

Paris-Sud XI, Université de

432

A Typed Calculus Supporting Shallow Embeddings of Abstract Machines  

E-Print Network [OSTI]

A Typed Calculus Supporting Shallow Embeddings of Abstract Machines Aaron Bohannon Zena M. Ariola taken by abstract machines and reductions in a system of proof terms for a version the sequent calculus. We believe that by doing so we shed light on some essential characteristics of abstract machines

Ariola, Zena M.

433

On Time Machines in KerrNewman Spacetime  

E-Print Network [OSTI]

On Time Machines in Kerr­Newman Spacetime Diplomarbeit der Philosophisch´aj´icek Institut f¨ur theoretische Physik Universit¨at Bern #12;#12;On Time Machines in Kerr­Newman Spacetime, The Time Machine #12;#12;Contents 1 Introduction 1 1.1 Historical Remarks

WĂĽthrich, Christian

434

Support Vector Machines in Moderate Sub-pixel Snow Mapping  

E-Print Network [OSTI]

Support Vector Machines in Moderate Sub-pixel Snow Mapping Hongen Zhang College of Environmental technique in sub-pixel snow mapping, support vector machines (SVMs). In practice, SVM method provided% as compared to the reference data from Aster image classification, which show that the support vector machines

California at Santa Barbara, University of

435

Machines and the Body between Anatomy and Pathology  

E-Print Network [OSTI]

Machines and the Body between Anatomy and Pathology Domenico Bertoloni Meli* 1. Introduction of anatomists sought to explain the operations of the body in terms of machines of varying nature and complexity. These machines responded to shifting criteria of intelligibility at the time: whereas Aristotelian or Galenic

Bertoloni Meli, Domenico

436

Permuting machines and priority queues R. E. L. Aldred  

E-Print Network [OSTI]

Permuting machines and priority queues R. E. L. Aldred M. D. Atkinson H. P. van Ditmarsch C. C. Handley D. A. Holton D. J. McCaughan March 31, 2005 Abstract Machines whose sole function is to re-order their input data are consid- ered. Every such machine defines a set of allowable input-output pairs

Atkinson, Mike

437

Heavy Machine Failure Maintenance Stratege Study Based on FMEA  

Science Journals Connector (OSTI)

Heavy machine is mainly used for large-scale, large parts of the processing, is the country's headed guard equipment. Heavy machine's non-normal shutdown will result in significant damage to the enterprise, how to effectively improve the maintenance ... Keywords: Heavy machine, FMEA, Maintenance Strategy

Deng Chao; Xiong Yao; Yuan-hang Wang; Wu Jun

2010-06-01T23:59:59.000Z

438

Safe Operating Procedure LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT  

E-Print Network [OSTI]

Safe Operating Procedure (5/11) LOCKOUT/TAGOUT FOR MACHINES & EQUIPMENT: SPECIAL CIRCUMSTANCES://ehs.unl.edu/) Introduction This SOP is intended to work in tandem with other EHS SOPs related to Lockout/Tagout (LO/TO): · Lockout/Tagout for Machines & Equipment: Program Overview · Lockout/Tagout for Machines & Equipment

Farritor, Shane

439

Multiobjective optimization of the dry electric discharge machining process  

E-Print Network [OSTI]

January 15, 2009 Abstract Dry Electric Discharge Machining (EDM) is an environment­friendly modification: Electric Discharge Machining (EDM), Dry EDM, Design of experiments, Multi­objective optimization, NSGA II;1 Introduction Electric Discharge Machining (EDM) is a thermo­electric process in which material removal takes

Paris-Sud XI, Université de

440

Abstract machines for game semantics, revisited Olle Fredriksson  

E-Print Network [OSTI]

: In this paper we are developing the line of work on PAM/IAM/JAM in order to define new abstract machines whichAbstract machines for game semantics, revisited Olle Fredriksson University of Birmingham, UK Dan R. Ghica University of Birmingham, UK Abstract--We define new abstract machines for game seman- tics which

Ghica, Dan

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Transient simulation of absorption machines  

SciTech Connect (OSTI)

This paper presents a model for a water-cooled Lithium-Bromide/water absorption chiller and predicts its transient response both during the start-up phase and during the shutoff period. The simulation model incorporates such influencing factors as the thermodynamic properties of the working fluid, the absorbent, the heat-transfer configuration of different components of the chiller and related physical data. The time constants of different components are controlled by a set of key parameters that have been identified in this study. The results show a variable but at times significant amount of time delay before the chiller capacity gets close to its steady-state value. The model is intended to provide an insight into the mechanism of build-up to steady-state performance. By recognizing the significant factors contributing to transient degradation, steps can be taken to reduce such degradation. The evaluation of the residual capacity in the shut-off period will yield more realistic estimates of chiller COP for a chiller satisfying dynamic space cooling load.

Anand, D.K.; Allen, R.W.; Kumar, B.

1982-08-01T23:59:59.000Z

442

Transient simulation of absorption machines  

SciTech Connect (OSTI)

This paper presents a model for a water-cooled Lithium-Bromide/water absorption chiller and predicts its transient response both during the start-up phase and during the shutoff period. The simulation model incorporates such influencing factors as the thermodynamic properties of the working fluid, the absorbent, the heat-transfer configuration of different components of the chiller and related physical data. The time constants of different components are controlled by a set of key parameters that have been identified in this study. The results show a variable but at times significant amount of time delay before the chiller capacity gets close to its steadystate value. The model is intended to provide an insight into the mechanism of build-up to steady-state performance. By recognizing the significant factors contributing to transient degradation, steps can be taken to reduce such degradation. The evaluation of the residual capacity in the shut-off period will yield more realistic estimates of chiller COP for a chiller satisfying dynamic space cooling load.

Anand, D.K.; Allen, R.W.; Kumar, B.

1982-08-01T23:59:59.000Z

443

DOE - Office of Legacy Management -- American Machine and Foundry Co -  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Buffalo - NY 63 Buffalo - NY 63 FUSRAP Considered Sites Site: American Machine and Foundry Co - Buffalo (NY.63 ) Eliminated from further consideration under FUSRAP Designated Name: Not Designated Alternate Name: AMF NY.63-1 Location: Buffalo , New York NY.63-1 Evaluation Year: 1990 NY.63-1 Site Operations: Design engineering for the development of electrical and mechanical controls. NY.63-1 Site Disposition: Eliminated - Potential for radioactive contamination considered remote. Radioactive material, if any was used at the site, would have been limited to test quantities. NY.63-2 Radioactive Materials Handled: None Indicated - test quantities, if any NY.63-1 Primary Radioactive Materials Handled: None Indicated, But Could Have Included Test Quantities of Finished Uranium Metal NY.63-1

444

Proceedings of CLAWAR 2011: the 14th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, Paris, France, 68 september 2011  

E-Print Network [OSTI]

, autonomous sailboat, control, wind-independent, Voronoi dia- gram. 1. Introduction This paper puts up a new control strategy that is independent of wind sensor data for autonomous sailboats. It is motivated mainly and the Support Technologies for Mobile Machines, Paris, France, 6­8 september 2011 A wind-independent control

Boyer, Edmond

445

Maps of Dipersions for Machining Processes  

E-Print Network [OSTI]

During the products design, the design office defines dimensional and geometrical parameters according to the use criteria and the product functionality. The manufacturing department must integrate the manufacturing and the workpiece position dispersions during the choice of tools and machines operating modes and parameters values to respect the functional constraints. In this paper, we suggest to model the turning dispersions taking into account not only geometrical specifications of position or orientation but also the experience of method actors. A representation using the principle of know-how maps in two or three dimensions is privileged. The most interesting aspect is that these maps include tacit and explicit knowledge. An experimental study realized on a machine tool (HES 300) allows to elaborate knowledge maps especially for the turning process.

Valéry Wolff; Arnaud Lefebvre; J. Renaud

2008-03-03T23:59:59.000Z

446

El Ma Electronic Machining srl | Open Energy Information  

Open Energy Info (EERE)

Ma Electronic Machining srl Ma Electronic Machining srl Jump to: navigation, search Name El.Ma. Electronic Machining srl Place Riva del Garda (TN), Italy Zip 38066 Sector Hydro, Hydrogen, Solar, Wind energy Product String representation "Italy-based, in ... solar sectors." is too long. References El.Ma. Electronic Machining srl[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. El.Ma. Electronic Machining srl is a company located in Riva del Garda (TN), Italy . References ↑ "El.Ma. Electronic Machining srl" Retrieved from "http://en.openei.org/w/index.php?title=El_Ma_Electronic_Machining_srl&oldid=344591" Categories: Clean Energy Organizations Companies Organizations

447

Photo of the Week: The Z Machine | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

The Z Machine The Z Machine Photo of the Week: The Z Machine September 21, 2012 - 11:08am Addthis The Z machine, the largest X-ray generator in the world, is located in Albuquerque, New Mexico. As part of the Pulsed Power Program, which started at Sandia National Laboratories in the 1960s, the Z machine concentrates electrical energy and turns it into short pulses of enormous power, which can then be used to generate X-rays and gamma rays. Click on the image for a full size version. | Photo credit: Randy Montoya/Sandia National Laboratories. The Z machine, the largest X-ray generator in the world, is located in Albuquerque, New Mexico. As part of the Pulsed Power Program, which started at Sandia National Laboratories in the 1960s, the Z machine concentrates electrical energy and turns it into short pulses of enormous power, which

448

U.S. Department of Energy National Environmental Policy Act Categorical Exclusion Determination  

Broader source: Energy.gov (indexed) [DOE]

GA-County-Hall GA-County-Hall Location: County Hall GA American Recovery and Reinvestment Act: Proposed Action or Project Description 1) Develop an energy efficiency and conservation block grant strategy (completed); 2) implement energy efficiency retrofits for municipal buildings-upgrading lighting systems (28 facilities), including the purchase, installation, and operation of a bulb eater machine to crush and package the glass of old light bulbs in accordance with EPA guidelines for disposal; upgrading the laundry dryer; installing vending misers; installing variable speed drives; installing energy recovery units and controls on toilet exhausts; installing or reprogramming heating, ventilating, and air conditioning (HVAC) direct digital controls;

449

Abrasive slurry composition for machining boron carbide  

DOE Patents [OSTI]

An abrasive slurry particularly suited for use in drilling or machining boron carbide consists essentially of a suspension of boron carbide and/or silicon carbide grit in a carrier solution consisting essentially of a dilute solution of alkylaryl polyether alcohol in octyl alcohol. The alkylaryl polyether alcohol functions as a wetting agent which improves the capacity of the octyl alcohol for carrying the grit in suspension, yet without substantially increasing the viscosity of the carrier solution.

Duran, Edward L. (Santa Fe, NM)

1985-01-01T23:59:59.000Z

450

Online Load Balancing for Related Machines  

E-Print Network [OSTI]

of entire schedule s as follows: load(s; i) = 1 v i X s(j)=i p j ; Load(s) = max i load(s; i) It is easyOn­line Load Balancing for Related Machines Piotr Berman \\Lambda Moses Charikar y Marek Karpinski z­line load balancing was studied extensively over the years (cf., e.g., [7], [3], [4], and [2

Karpinski, Marek

451

No time machines in classical general relativity  

E-Print Network [OSTI]

Irrespective of local conditions imposed on the metric, any extendible spacetime U has a maximal extension containing no closed causal curves outside the chronological past of U. We prove this fact and interpret it as impossibility (in classical general relativity) of the time machines, insofar as the latter are defined to be causality-violating regions created by human beings (as opposed to those appearing spontaneously).

S. Krasnikov

2014-02-13T23:59:59.000Z

452

IEEE TRANSACTIONS ON ENERGY CONVERSION, VOL. 21, NO. 3, SEPTEMBER 2006 699 Speed-Sensorless Torque Control of Induction  

E-Print Network [OSTI]

IEEE TRANSACTIONS ON ENERGY CONVERSION, VOL. 21, NO. 3, SEPTEMBER 2006 699 Speed-Sensorless Torque Control of Induction Machine Based on Carrier Signal Injection and Smooth-Air-Gap Induction Machine Model--A speed-estimation technique for induction machines, based on carrier signal injection and the standard

Hofmann, Heath F.

453

Appliances and Commercial Equipment Standards  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Refrigerated Beverage Vending Machines Energy Conservation Standards Refrigerated Beverage Vending Machines Energy Conservation Standards Sign up for e-mail updates on regulations for this and other products The Department of Energy (DOE) is considering amending energy conservation standards for refrigerated beverage vending machines (BVMs) as required by (42 U.S.C. 6295(m)(1)). Recent Updates | Public Meeting Information | Submitting Public Comments | Milestones and Documents | Related Rulemakings | Statutory Authority | Contact Information Recent Updates DOE published a notice of public meeting and availability of the framework document regarding energy conservation standards for refrigerated beverage vending machines. 78 FR 33262 (June 4, 2013). Public Meeting Information A public meeting was held on June 20, 2013.

454

Sanden Vendo America: Order (2014-SE-52002) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

in the U.S. 31 units of Class A refrigerated bottled or canned beverage vending machine model Vue30 (with 1128127 cassette refrigeration deck), a noncompliant product. The...

455

Arnold Schwarzenegger Preserving California's  

E-Print Network [OSTI]

......................................................................................107 A-5 Standards for Freezers That Are Consumer Products Canned and Bottled Beverage Vending Machines, and Wine Chillers That Are Not Consumer Products....................................................112 B-1 Room Air Conditioner, Room Air-Conditioning Heat Pump, Packaged Terminal Air Conditioner

456

A Study on the Icon Feedback Types of Small Touch Screen for the Elderly  

Science Journals Connector (OSTI)

Small touch screens are widely used in applications such as bank ATMs, point-of-sale terminals, ticket vending machines, facsimiles, and home automation in the daily life. It is intuition-oriented and easy to ope...

Wang-Chin Tsai; Chang-Franw Lee

2009-01-01T23:59:59.000Z

457

851 S.W. Sixth Avenue, Suite 1100 Steve Crow 503-222-5161 Portland, Oregon 97204-1348 Executive Director 800-452-5161  

E-Print Network [OSTI]

Commercial Central AC and Heat Pumps Refrigerators and Freezers Room Air Conditioners Fluorescent Lamp efficiency standards program and described the historical impact on regional electricity use, Commercial Refrigeration Equipment, Commercial Vending Machines General Service Fluorescent Lamps

458

Modeling and design optimization of switched reluctance machine by boundary element analysis and simulation  

SciTech Connect (OSTI)

Nonlinear boundary element analysis provides a more accurate and detailing tool for the design of switched reluctance machines, than the conventional equivalent-circuit methods. Design optimization through more detailed analysis and simulation can reduce development and prototyping costs and time to market. Firstly, magnetic field modeling of an industrial switched reluctance machine by boundary element method is reported in this paper. Secondly, performance prediction and dynamic simulation of motor and control design are presented. Thirdly, magnetic forces that cause noise and vibration are studied, to include the effects of motor and control design variations on noise in the design process. Testing of the motor in NEMA 215-Frame size is carried out to verify the accuracy of modeling and simulation.

Tang, Y.; Kline, J.A. Sr. [Emerson Motor Technology Center, St. Louis, MO (United States). U.S. Electrical Motors Div.] [Emerson Motor Technology Center, St. Louis, MO (United States). U.S. Electrical Motors Div.

1996-12-01T23:59:59.000Z

459

Automated Detection of Persistent Kernel Control-Flow Attacks  

E-Print Network [OSTI]

machine monitors. Our implementation detected all the control-flow modifying rootkits we could install.g., by using a virtual machine monitor or a separate card to examine kernel memory [14, 37, 23], or may's main goal is to add surreptitious functionality to the system, then either this functionality

Hicks, Michael

460

Author's personal copy Variable field-of-view machine vision based row guidance of an agricultural robot  

E-Print Network [OSTI]

robot Jinlin Xue a , Lei Zhang b , Tony E. Grift b, a College of Engineering, Nanjing Agricultural guidance Autonomous guidance Agricultural robot Fuzzy logic control a b s t r a c t A novel variable field-of-view machine vision method was developed allowing an agricultural robot to navigate between rows in cornfields

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

INTEGRATED ROBOT-HUMAN CONTROL IN MINING OPERATIONS  

SciTech Connect (OSTI)

This report describes the results of the 2nd year of a research project on the implementation of a novel human-robot control system for hydraulic machinery. Sensor and valve re-calibration experiments were conducted to improve open loop machine control. A Cartesian control example was tested both in simulation and on the machine; the results are discussed in detail. The machine tests included open-loop as well as closed-loop motion control. Both methods worked reasonably well, due to the high-quality electro-hydraulic valves used on the experimental machine. Experiments on 3-D analysis of the bucket trajectory using marker tracking software are also presented with the results obtained. Open-loop control is robustly stable and free of short-term dynamic problems, but it allows for drifting away from the desired motion kinematics of the machine. A novel, closed-loop control adjustment provides a remedy, while retaining much of the advantages of the open-loop control based on kinematics transformation. Additional analysis of previously recorded, three-dimensional working trajectories of the bucket of large mine shovels was completed. The motion patterns, when transformed into a family of curves, serve as the basis for software-controlled machine kinematics transformation in the new human-robot control system.

George Danko

2006-04-01T23:59:59.000Z

462

Energy Cost Calculator for Commercial Ice Machines | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Ice Machines Ice Machines Energy Cost Calculator for Commercial Ice Machines October 8, 2013 - 2:25pm Addthis Vary capacity size, energy cost, hours of operation, and /or efficiency level. INPUT SECTION Input the following data (if any parameter is missing, calculator will set to default value). Defaults Type of Ice Cube Machine Ice Making Head Self-Contained Remote Condensing Unit Ice Making Head Type of Condenser Air Cooled Water Cooled Air Cooled Ice Harvest Rate (lbs. ice per 24 hrs.) lbs. per 24 hrs. 500 lbs. per 24 hrs. Energy Consumption (per 100 lbs. of ice) kWh 5.5 kWh Quantity of ice machines to be purchased 1 Energy Cost $/kWh 0.06 $/kWh Annual Hours of Operation hrs. 3000 hrs. Calculate Reset OUTPUT SECTION Performance per Ice Cube Machine Your

463

Modeling Nuclear Properties with Support Vector Machines  

E-Print Network [OSTI]

We have made initial studies of the potential of support vector machines (SVM) for providing statistical models of nuclear systematics with demonstrable predictive power. Using SVM regression and classification procedures, we have created global models of atomic masses, beta-decay halflives, and ground-state spins and parities. These models exhibit performance in both data-fitting and prediction that is comparable to that of the best global models from nuclear phenomenology and microscopic theory, as well as the best statistical models based on multilayer feedforward neural networks.

Haochen Li; J. W. Clark; E. Mavrommatis; S. Athanassopoulos; K. A. Gernoth

2006-03-21T23:59:59.000Z

464

Measuring asymmetries in flavor asymmetric machines  

E-Print Network [OSTI]

The LHC offers a unique opportunity to investigate an ample spectra of phenomenous ranging from the Electro-Weak (EW) to the QCD sector of the Standard Model (SM). Among the quantities which can be measured in the LHC experiments are the CP and production asymmetries for several particles in a wide variety of decay modes. In this work we discuss about the interplay between production and CP asymmetries for particles produced in proton-proton interactions and the effects of one on the measurement of the other. This kind of effects are not present in flavor symmetric machines like the Tevatron or $e^+-e^-$ colliders.

A. A. Alves Jr.; J. Magnin

2010-12-30T23:59:59.000Z

465

Simplified Sensorless Control for BLDC Motor, Using DSP Technology Juan W. Dixon, Matas Rodrguez and Rodrigo Huerta  

E-Print Network [OSTI]

(BLDC) motor for electric vehicle applications. To control this machine it is generally required: electric drive, brushless motor, control system, drive. 1. Introduction In electric traction, like in other applications, a wide range in speed and torque control for the electric motor is desired. The DC machine

Catholic University of Chile (Universidad CatĂłlica de Chile)

466

PWM Inverter control and the application thereof within electric vehicles  

DOE Patents [OSTI]

An inverter (34) which provides power to an A.C. machine (28) is controlled by a circuit (36) employing PWM control strategy whereby A.C. power is supplied to the machine at a preselectable frequency and preselectable voltage. This is accomplished by the technique of waveform notching in which the shapes of the notches are varied to determine the average energy content of the overall waveform. Through this arrangement, the operational efficiency of the A.C. machine is optimized. The control circuit includes a micro-computer and memory element which receive various parametric inputs and calculate optimized machine control data signals therefrom. The control data is asynchronously loaded into the inverter through an intermediate buffer (38). In its preferred embodiment, the present invention is incorporated within an electric vehicle (10) employing a 144 VDC battery pack (32) and a three-phase induction motor (18).

Geppert, Steven (Bloomfield Hills, MI)

1982-01-01T23:59:59.000Z

467

Analyzing Massive Machine Maintenance Data in a Computing Cloud  

Science Journals Connector (OSTI)

We present a novel framework, CloudView, for storage, processing and analysis of massive machine maintenance data, collected from a large number of sensors embedded in industrial machines, in a cloud computing environment. This paper describes the architecture, ... Keywords: Sensors,Real time systems,Data analysis,Reliability,Cloud computing,Wind turbines,Maintenance engineering,MapReduce,Fault prediction,machine data analysis,case-based reasoning,cloud computing,Hadoop

Arshdeep Bahga; Vijay K. Madisetti

2012-10-01T23:59:59.000Z

468

A Note on Online Load Balancing for Related Machines  

E-Print Network [OSTI]

(j) that will execute it. We define the load of a machine i and the load of entire schedule s as follows: load(s; i) = 1A Note on On­line Load Balancing for Related Machines Piotr Berman \\Lambda Marek Karpinski y that differ in speed but are related in the following sence: a job of size p requires time p=v on a machine

Eckmiller, Rolf

469

A Machine-by-Machine Analysis of a Bi-Objective Resource Allocation Problem  

E-Print Network [OSTI]

, CO, 80523 Abstract-- As high performance computing systems contin- ually become faster, the operating of adding or removing machines from their high performance computing systems. We perform our study using the energy consumption more than doubled for high performance computing (HPC) systems, resulting in servers

Maciejewski, Anthony A.

470

Findings of the 2010 Joint Workshop on Statistical Machine Translation and Metrics for Machine Translation  

Science Journals Connector (OSTI)

This paper presents the results of the WMT10 and MetricsMATR10 shared tasks, which included a translation task, a system combination task, and an evaluation task. We conducted a large-scale manual evaluation of 104 machine translation systems and 41 ...

Chris Callison-Burch; Philipp Koehn; Christof Monz; Kay Peterson; Mark Przybocki; Omar F. Zaidan

2010-07-01T23:59:59.000Z

471

John Hsu, Oak Ridge National Laboratory, Flux Coupling Machines...  

Broader source: Energy.gov (indexed) [DOE]

& Publications Integration of Novel Flux Coupling Motor and Current Source Inverter Integration of Novel Flux Coupling Motor and Current Source Inverter Electric Machine R&D...

472

Effect of machining on the wear resistance of sintered materials  

Science Journals Connector (OSTI)

The machining and sizing of porous sintered materials produce an improvement in the wear resistance of thin surface layers of parts subjected...

V. A. Danilenko

1970-06-01T23:59:59.000Z

473

An Exact Extended Formulation for the Unrelated Parallel Machine ...  

E-Print Network [OSTI]

Aug 28, 2014 ... Abstract: The plethora of research on NP-hard parallel machine scheduling problems is focused on heuristics due to the theoretically and ...

Kerem Bulbul

2014-08-28T23:59:59.000Z

474

Single-Machine Two-Agent Scheduling Problems with ...  

E-Print Network [OSTI]

Jan 24, 2014 ... Abstract: We address a class of deterministic scheduling problems in which two agents compete for the usage of a single machine. The agents ...

Gaia Nicosia

2014-01-24T23:59:59.000Z

475

A hybrid Lagrangean metaheuristic for single machine scheduling ...  

E-Print Network [OSTI]

Aug 8, 2014 ... A hybrid Lagrangean metaheuristic for single machine scheduling problem with sequence-dependent setup times and due dates.

Thiago Henrique Nogueira

2014-08-08T23:59:59.000Z

476

How "Quantum" is the D-Wave Machine?  

E-Print Network [OSTI]

Recently there has been intense interest in claims about the performance of the D-Wave machine. In this paper, we outline a simple classical model, and show that it achieves excellent correlation with published input-output behavior of the D-Wave One machine on 108 qubits. While raising questions about "how quantum" the D-Wave machine is, the new model also provides additional algorithmic insights into the nature of the native computational problem solved by the D-Wave machine.

Seung Woo Shin; Graeme Smith; John A. Smolin; Umesh Vazirani

2014-01-28T23:59:59.000Z

477

DOE - Office of Legacy Management -- Cincinnati Milling and Machining...  

Office of Legacy Management (LM)

of Ohio Memorandum; Ruhe to Quigley; Subject: Trip Report to Cincinnati Milling Machine Company, Cincinnati, Ohio on September 17, 1963; October 7, 1963 OH.25-2 - DOE...

478

Covered Product Category: Air-Cooled Ice Machines  

Broader source: Energy.gov [DOE]

The Federal Energy Management Program (FEMP) provides acquisition guidance for air-cooled ice machines, which are covered by the ENERGY STAR program.

479

power electronics and machines | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Advanced Power Electronics and Electrical Machines Improvements in electric traction drives are essential to electric drive vehicles, and have the potential to significantly reduce...

480

A Column Generation Approach for Support Vector Machines  

E-Print Network [OSTI]

Apr 3, 2006 ... Abstract: The widely used Support Vector Machine (SVM) method has shown to yield good results in Supervised Classification problems.

Belen Martin-Barragan

2006-04-03T23:59:59.000Z

Note: This page contains sample records for the topic "vending machine controllers" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Equivalence of History and Generator Epsilon-Machines  

E-Print Network [OSTI]

Epsilon-machines are minimal, unifilar presentations of stationary stochastic processes. They were originally defined in the history machine sense, as hidden Markov models whose states are the equivalence classes of infinite pasts with the same probability distribution over futures. In analyzing synchronization, though, an alternative generator definition was given: unifilar, edge-emitting hidden Markov models with probabilistically distinct states. The key difference is that history epsilon-machines are defined by a process, whereas generator epsilon-machines define a process. We show here that these two definitions are equivalent in the finite-state case.

Nicholas F. Travers; James P. Crutchfield

2012-12-14T23:59:59.000Z

482

Machine Tool Design and Operation Strategies for Green Manufacturing  

E-Print Network [OSTI]

To compute the total energy consumption during machine toolsteady . The total energy consumption during the process, Eto compute the total energy consumption: non-productive

2010-01-01T23:59:59.000Z

483

Fiber optic diagnostic techniques for the electrical discharge machining process.  

E-Print Network [OSTI]

??Plasma sparks from an electrical discharge machining phics. (EDM) process were observed using fiber optics positioned the dielectric oil. New measurement techniques were developed to… (more)

Pillans, Brandon William

2012-01-01T23:59:59.000Z

484

Z machine helps scientists understand the sun's heart | National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

machine helps scientists understand the sun's heart | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing...

485

Efficiency of autonomous soft nano-machines at maximum power  

E-Print Network [OSTI]

We consider nano-sized artificial or biological machines working in steady state enforced by imposing non-equilibrium concentrations of solutes or by applying external forces, torques or electric fields. For unicyclic and strongly coupled multicyclic machines, efficiency at maximum power is not bounded by the linear response value 1/2. For strong driving, it can even approach the thermodynamic limit 1. Quite generally, such machines fall in three different classes characterized, respectively, as "strong and efficient", "strong and inefficient", and "balanced". For weakly coupled multicyclic machines, efficiency at maximum power has lost any universality even in the linear response regime.

Udo Seifert

2010-11-11T23:59:59.000Z

486

Exponential neighborhood search for a parallel machine scheduling ...  

E-Print Network [OSTI]

Sun and Wang [26] consider the identical parallel machine problem with a large ...... be found in the OR-Library which is a collection of instances for operations ...

2006-08-09T23:59:59.000Z

487

Application of machine learning technique in wind turbine fault diagnosis.  

E-Print Network [OSTI]

??In this study, a machine learning technique called anomaly detection is employed for wind turbine bearing fault detection. Basically, the anomaly detection algorithm is used… (more)

Purarjomandlangrudi, Afrooz

2014-01-01T23:59:59.000Z

488

U.S. Department of Energy NEPA Categorical Exclusion Determination Form  

Broader source: Energy.gov (indexed) [DOE]

WI-City-Oshkosh WI-City-Oshkosh Location: City Oshkosh WI American Recovery and Reinvestment Act: Proposed Action or Project Description: 1) Conduct an energy audit of all city facilities, 2) energy efficiency retrofits at city buildings including: replacing failed and leaking steam traps at the Public Library; conducting lighting retrofits at the Public Museum; replacing fans and pump motors at the Safety building and Public Museum; installing occupancy controls on vending machine operation at several municipal buildings; replacing plumbing fixtures at City Hall, Public Museum, Water Distribution, Wastewater Treatment Plant, Safety Building, Transit Building, and Fire Stations 16, 17, 18, and 19; lighting upgrades at Water Distribution Plant, City Hall, Water

489

MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program |  

Broader source: Energy.gov (indexed) [DOE]

Commercial EnergyAdvantage Rebate Commercial EnergyAdvantage Rebate Program MidAmerican Energy (Electric) - Commercial EnergyAdvantage Rebate Program < Back Eligibility Agricultural Commercial Construction Industrial Institutional Nonprofit Schools Savings Category Home Weatherization Commercial Weatherization Heating & Cooling Commercial Heating & Cooling Cooling Other Construction Manufacturing Heat Pumps Appliances & Electronics Commercial Lighting Lighting Water Heating Program Info Expiration Date 12/31/2012 State South Dakota Program Type Utility Rebate Program Rebate Amount Variable-Speed Drives: $30/HP Clothes Washer: $100 Dishwasher: $20 Vending Machine Controller: $50 Fluorescent Lighting: $6-$42/fixture Lighting Occupancy Sensors: $20/sensor Pulse Start Metal Halide Lighting: $25 or $50/fixture

490

SBOT LOUISIANA STRATEGIC PETROLEUM RESERVE POC Sally Leingang  

Broader source: Energy.gov (indexed) [DOE]

LOUISIANA LOUISIANA STRATEGIC PETROLEUM RESERVE POC Sally Leingang Telephone (504) 734-4362 Email sally.leingang@spr.doe.gov ADMINISTATIVE / WASTE / REMEDIATION Temporary Help Services 561320 Locksmiths 561622 Exterminating and Pest Control Services 561710 Janitorial Services 561720 Landscaping Services 561730 CONSTRUCTION Oil and Gas Pipeline and Related Structures Construction 237120 All Other Specialty Trade Contractors 238990 GOODS Boat Dealers 441222 Radio, Television, and Other Electronics Stores 443112 Computer and Software Stores 443120 Camera and Photographic Supplies Stores 443130 Other Building Material Dealers 444190 Office Supplies and Stationery Stores 453210 Vending Machine Operators 454210 Heating Oil Dealers 454311 Liquefied Petroleum Gas (Bottled Gas) Dealers 454312 Other Fuel Dealers

491

Refueling machine with relative positioning capability  

DOE Patents [OSTI]

A refueling machine having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images.

Challberg, Roy Clifford (Livermore, CA); Jones, Cecil Roy (Saratoga, CA)

1998-01-01T23:59:59.000Z

492

Scaling up: Distributed machine learning with cooperation  

SciTech Connect (OSTI)

Machine-learning methods are becoming increasingly popular for automated data analysis. However, standard methods do not scale up to massive scientific and business data sets without expensive hardware. This paper investigates a practical alternative for scaling up: the use of distributed processing to take advantage of the often dormant PCs and workstations available on local networks. Each workstation runs a common rule-learning program on a subset of the data. We first show that for commonly used rule-evaluation criteria, a simple form of cooperation can guarantee that a rule will look good to the set of cooperating learners if and only if it would look good to a single learner operating with the entire data set. We then show how such a system can further capitalize on different perspectives by sharing learned knowledge for significant reduction in search effort. We demonstrate the power of the method by learning from a massive data set taken from the domain of cellular fraud detection. Finally, we provide an overview of other methods for scaling up machine learning.

Provost, F.J. [NYNEX Science & Technology, White Plains, NY (United States); Hennessy, D.N. [Univ. of Pittsburgh, PA (United States)

1996-12-31T23:59:59.000Z

493

A strategy for selection of the optimal machining sequence in high speed milling process  

Science Journals Connector (OSTI)

In order to reduce total manufacturing time for dies and moulds, machining process should be optimised. In this method, the parts, characterised by complex geometry, are produced by significant application of high speed milling utilisation of ball end ... Keywords: ball end milling, high speed machining, high speed milling, machining sequences, machining strategy, process optimisation, process planning, rest machining, sculptured surfaces, sequence selection

Rezo Aliyev

2006-09-01T23:59:59.000Z

494

A framework for studying the increase of complexity of interacting finite state machines  

E-Print Network [OSTI]

1 A framework for studying the increase of complexity of interacting finite state machines Lavoué F are associated with increased complexity. Here we investigate this tradeoff for simple machines in a discrete for that machine. The finite state machines can store different length histories, but machines can only increase

Boschetti, Fabio

495

Development of a 2-kilowatt high-reliability wind machine. Phase I. Design and analysis. Volume I. Executive summary  

SciTech Connect (OSTI)

A high reliability wind machine rated for 2 kW at 9 m/s has been designed to be cost-effective for remote site use. To meet or exceed environmental conditions as specified in Contract PF64410F, the resulting design defines a rugged, relatively simple wind machine. Rigorous fatigue analysis for structural components and development of redundant systems for electrical components led to an expected mean time between failures of 12.35 years. Approximately one year into the research and development program, a completed design meeting contract stipulations is being submitted to the contract buyer. The design is for a horizontal axis, down-wind machine with two wooden blades spanning 5 meters diameter. Positive rotor speed control is accomplished through a centrifugally governed variable pitch, stalling rotor. Design merits have been confirmed through dynamic truck testing.

Drake, W.; Clews, H.; Cordes, J.; Johnson, B.; Murphy, P.

1980-01-01T23:59:59.000Z

496

Development of a 2-kilowatt high-reliability wind machine. Phase I. Design and analysis. Volume II. Technical report  

SciTech Connect (OSTI)

A high reliability wind machine rated for 2 kW at 9 m/s has been designed to be cost-effective for remote site use. To meet or exceed environmental conditions as specified in Contract PF64410F, the resulting design defines a rugged, relatively simple wind machine. Rigorous fatigue analysis for structural components and development of redundant systems for electrical components led to an expected mean time between failures of 12.35 years. Approximately one year into the research and development program a completed design meeting contract stipulations is being submitted to the contract buyer. The design is for a horizontal axis, down-wind machine with two wooden blades spanning 5 meters diameter. Positive rotor speed control is accomplished through a centrifugally governed variable pitch stalling rotor. Design merits have been confirmed through dynamic truck testing.

Drake, W.; Clews, H.; Cordes, J.; Johnson, B.; Murphy, P.

1980-01-01T23:59:59.000Z

497

Pit disassembly motion control  

SciTech Connect (OSTI)

A Department of Energy (DOE) Pit Disassembly and Conversion Facility (PDCF) is being designed for the Savannah River Site in South Carolina. The facility will recover plutonium from excess nuclear weapon pits defined in START II and START III treaties. The plutonium will be stored and used to produce mixed oxide reactor fuel at another new DOE facility. Because of radiation dose issues, much of the pit disassembly work and material transfer will be automated. Automated material handling systems will interface with disassembly lathes, conversion reactors that produce oxide for storage, robotic container welding stations, vault retrieval systems, and nondestructive assay (NDA) instrumentation. The goal is to use common motion control hardware for material transfer and possibly common motion controllers for the unique PDCF systems. The latter is complicated by the different directions manufactures are considering for distributed control, such as Firewire, SERCOS, etc., and by the unique control requirements of machines such as lathes compared to controls for an integrated NDA system. The current design approach is to standardize where possible, use network cables to replace wire bundles where possible, but to first select hardware and motion controllers that meet specific machine or process requirements.

Christensen, L. (Lowell); Pittman, P. C. (Pete C.)

2001-01-01T23:59:59.000Z

498

Machine learning and the quantitative analysis of confocal microscopy with an application to the embryogenesis of drosophila melanogaster  

E-Print Network [OSTI]

image segmentations: from machine to expert Watershed over–with active learning. Machine Learning, 15:201–221.The boosting approach to machine learning: An overview. In

Beaver, William Matthew

2011-01-01T23:59:59.000Z

499

Process characterization of Electrical Discharge Machining of highly doped silicon ; Process characterization of EDM of highly doped silicon .  

E-Print Network [OSTI]

??Electrical Discharge Machining (EDM) is an advanced machining process that removes material via thermal erosion through a plasma arc. The machining process is accomplished through… (more)

Crawford, Gregory Allan

2012-01-01T23:59:59.000Z

500

Open architecture in control system integration  

SciTech Connect (OSTI)

Open architecture offers the manufacturing community a number of advantages in the integration of future machine control systems. Among these advantages is the ability to upgrade and take advantage of innovative new control strategies. A key enabling technology in open architecture control systems is the digital signal processor (DSP). DSPs can be used to provide a complete control system or can enhance the computational capability of larger control systems. The use of DSPs in the integration of open architecture control systems is discussed, including their impact on reliability and control system functionality. In addition, the role of DSPs in control system architecture is addressed.

Wysor, R.W. [Oak Ridge National Lab., TN (United States); Carnal, C.L. [Tennessee Technological Univ., Cookeville, TN (United States); Igou, R.E. [Oak Ridge Y-12 Plant, TN (United States)

1993-09-01T23:59:59.000Z