Powered by Deep Web Technologies
Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

DOE/SC-ARM/P-07-005.1 ARM Value-Added Product (VAP) Monthly Status Report  

NLE Websites -- All DOE Office Websites (Extended Search)

1 1 ARM Value-Added Product (VAP) Monthly Status Report ARM Translator Team J. Comstock C. Flynn M. Jensen C. Long D. Turner S. Xie March 13, 2007 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service

2

ARM KAZR-ARSCL Value Added Product  

DOE Data Explorer (OSTI)

The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

Michael Jensen

3

ARM KAZR-ARSCL Value Added Product  

SciTech Connect

The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments.

Michael Jensen

2012-09-28T23:59:59.000Z

4

Merged Sounding Value-Added Product  

Science Conference Proceedings (OSTI)

The Merged Sounding value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer (MWR), surface meteorological instruments, and European Centre for Medium-Range Weather Forecasts (ECMWF) model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state at one-minute temporal intervals and a total of 266 altitude levels.

Troyan, D

2010-03-03T23:59:59.000Z

5

Aerosol Best Estimate Value-Added Product  

Science Conference Proceedings (OSTI)

The objective of the Aerosol Best Estimate (AEROSOLBE) value-added product (VAP) is to provide vertical profiles of aerosol extinction, single scatter albedo, asymmetry parameter, and Angstroem exponents for the atmospheric column above the Central Facility at the ARM Southern Great Plains (SGP) site. We expect that AEROSOLBE will provide nearly continuous estimates of aerosol optical properties under a range of conditions (clear, broken clouds, overcast clouds, etc.). The primary requirement of this VAP was to provide an aerosol data set as continuous as possible in both time and height for the Broadband Heating Rate Profile (BBHRP) VAP in order to provide a structure for the comprehensive assessment of our ability to model atmospheric radiative transfer for all conditions. Even though BBHRP has been completed, AEROSOLBE results are very valuable for environmental, atmospheric, and climate research.

Flynn, C; Turner, D; Koontz, A; Chand, D; Sivaraman, C

2012-07-19T23:59:59.000Z

6

ARM - VAP Product - armbeatm  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsarmbearmbeatm Productsarmbearmbeatm Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095313 DOI: 10.5439/1039931 Central Facility, Lamont, OK (SGP C1) DOI: 10.5439/1039932 Central Facility, Barrow AK (NSA C1) DOI: 10.5439/1039933 Central Facility, Manus I., PNG (TWP C1) DOI: 10.5439/1039934 Central Facility, Nauru Island (TWP C2) DOI: 10.5439/1039935 Central Facility, Darwin, Australia (TWP C3) [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : ARMBEATM ARMBE: Atmospheric measurements Active Dates 1994.01.01 - 2012.12.31 Originating VAP Process ARM Best Estimate Data Products : ARMBE Description The ARM Best Estimate Atmospheric Measurements (ARMBEATM) value-added

7

Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product  

Science Conference Proceedings (OSTI)

The purpose of this document is to describe the Raman Lidar Profiles–Temperature (RLPROFTEMP) value-added product (VAP) and the procedures used to derive atmospheric temperature profiles from the raw RL measurements. Sections 2 and 4 describe the input and output variables, respectively. Section 3 discusses the theory behind the measurement and the details of the algorithm, including calibration and overlap correction.

Newsom, RK; Sivaraman, C; McFarlane, SA

2012-10-31T23:59:59.000Z

8

ARM Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 1–September 30, 2012  

SciTech Connect

The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

Sivaraman, C

2012-11-13T23:59:59.000Z

9

ARM Climate Research Facility Quarterly Value-Added Product Report First Quarter: October 01-December 31, 2011  

SciTech Connect

The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

Sivaraman, C

2012-02-28T23:59:59.000Z

10

ARM - Value-Added Products (VAP)  

NLE Websites -- All DOE Office Websites (Extended Search)

banner Cart Icon Cart | Home | People | Site Index Atmospheric Radiation Measurement Climate Research Facility US Department of Energy About Science Campaigns Sites Instruments...

11

ARM - Value-Added Product (VAP) Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

banner Cart Icon Cart | Home | People | Site Index Atmospheric Radiation Measurement Climate Research Facility US Department of Energy About Science Campaigns Sites Instruments...

12

Organic Aerosol Component (OACOMP) Value-Added Product Report  

SciTech Connect

Significantly improved returns in their aerosol chemistry data can be achieved via the development of a value-added product (VAP) of deriving OA components, called Organic Aerosol Components (OACOMP). OACOMP is primarily based on multivariate analysis of the measured organic mass spectral matrix. The key outputs of OACOMP are the concentration time series and the mass spectra of OA factors that are associated with distinct sources, formation and evolution processes, and physicochemical properties.

Fast, J; Zhang, Q; Tilp, A; Shippert, T; Parworth, C; Mei, F

2013-08-23T23:59:59.000Z

13

ARM - Value-Added Product Status Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

Status Reports Status Reports Publications Journal Articles Conference Documents Program Documents Technical Reports Publications Database Public Information Materials Image Library Videos Publication Resources Submit a Publication Publishing Procedures ARM Style Guide (PDF, 448KB) Acronyms Glossary Logos Contacts RSS for Publications Value-Added Product Status Reports ARM Climate Research Facility Quarterly Value-Added Product Report July 1-September 30, 2013 (PDF, 1MB) ARM Climate Research Facility Quarterly Value-Added Product Report April 1-June 30, 2013 (PDF, 1MB) ARM Climate Research Facility Quarterly Value-Added Product Report January 1-March 31, 2013 (PDF, 268KB) ARM Climate Research Facility Quarterly Value-Added Product Report October 1-December 31, 2012 (PDF, 271KB) ARM Climate Research Facility Quarterly Value-Added Product Report

14

ARM Value-Added Cloud Products: Description and Status  

NLE Websites -- All DOE Office Websites (Extended Search)

Value-Added Cloud Products: Value-Added Cloud Products: Description and Status M. A. Miller, K. L. Johnson, and D. T. Troyan Brookhaven National Laboratory Upton, New York E. E. Clothiaux Pennsylvania State University University Park, Pennsylvania E. J. Mlawer Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts G. G. Mace University of Utah Salt Lake City, Utah Introduction The Atmospheric Radiation Measurement (ARM) Program operates a variety of state-of-the-art active and passive remote sensors at its sites. These sensors provide information about the thermodynamic state of the atmosphere and the structure of the clouds that are present above the site. Families of value- added products (VAPs) that contain geophysically relevant data are produced from the electronic

15

ARM - VAP Product - armbecldrad  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsarmbearmbecldrad Productsarmbearmbecldrad Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095314 DOI: 10.5439/1039926 Central Facility, Lamont, OK (SGP C1) DOI: 10.5439/1039927 Central Facility, Barrow AK (NSA C1) DOI: 10.5439/1039928 Central Facility, Manus I., PNG (TWP C1) DOI: 10.5439/1039929 Central Facility, Nauru Island (TWP C2) DOI: 10.5439/1039930 Central Facility, Darwin, Australia (TWP C3) [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : ARMBECLDRAD ARMBE: Cloud Radiation measurements Active Dates 1996.01.01 - 2011.01.01 Originating VAP Process ARM Best Estimate Data Products : ARMBE Description The ARMBE Cloud Radiation (ARMBECLDRAD) VAP contains a best estimate of

16

ARM - Evaluation Product - Organic Aerosol Component VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsOrganic Aerosol Component VAP ProductsOrganic Aerosol Component VAP Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Organic Aerosol Component VAP 2011.01.08 - 2012.03.24 Site(s) SGP General Description Organic aerosol (OA, i.e., the organic fraction of particles) accounts for 10-90% of the fine aerosol mass globally and is a key determinant of aerosol radiative forcing. But atmospheric OA is poorly characterized and its life cycle insufficiently represented in models. As a result, current models are unable to simulate OA concentrations and properties. This deficiency represents a large source of uncertainty in the quantification of aerosol direct and indirect effects and the prediction of future climate change. The Organic Aerosol Component (OACOMP) value-added product (VAP) uses

17

ARM - Evaluation Product - Merged Sounding VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsMerged Sounding VAP ProductsMerged Sounding VAP Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Merged Sounding VAP Site(s) FKB GRW HFE NIM NSA PYE SGP TWP General Description This value-added product (VAP) uses a combination of observations from radiosonde soundings, the microwave radiometer, surface meteorological instruments, and ECMWF model output with a sophisticated scaling/interpolation/smoothing scheme in order to define profiles of the atmospheric thermodynamic state. These profiles are calculated at one-minute time resolution and 266 vertical levels which vary such that greater detail (20 meters) is captured near the surface with the resolution becoming coarser (200 meters) as the maximum altitude - 20 km above mean

18

ARM - VAP Product - mfrsrcldod1min  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsmfrsrcldodmfrsrcldod1min Productsmfrsrcldodmfrsrcldod1min Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027296 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : MFRSRCLDOD1MIN Derived: Cloud Optical Properties from MFRSR, MWR, Langley Analysis Active Dates 1997.08.21 - 2013.10.08 Originating VAP Process Cloud Optical Properties from MFRSR Using Min Algorithm : MFRSRCLDOD Description The mfrsrcldod1min value-added product produces cloud optical properties (optical depth and effective radius) from multi-filter rotating shadowband radiometer (MFRSR) , micorwave radiomter (MWR) and the Langley analysis Value Added Product (Langley VAP).

19

ARM Climate Research Facility Quarterly Value-Added Product Report Fourth Quarter: July 01–September 30, 2011  

SciTech Connect

The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text.

Sivaraman, C

2011-11-02T23:59:59.000Z

20

ARM - VAP Product - abrfcprecip  

NLE Websites -- All DOE Office Websites (Extended Search)

or call us at 1-888-ARM-DATA. Send VAP Output : ABRFCPRECIP Arkansas-Red Basin River Forecast Center: estimated precipitation Active Dates 1994.06.24 - 2014.01.12 Originating VAP...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Micropulse Lidar Cloud Mask Value-Added Product Technical Report  

Science Conference Proceedings (OSTI)

Lidar backscattered signal is a useful tool for identifying vertical cloud structure in the atmosphere in optically thin clouds. Cloud boundaries derived from lidar signals are a necessary input for popular ARM data products, such as the Active Remote Sensing of Clouds (ARSCL) product. An operational cloud boundary algorithm (Wang and Sassen 2001) has been implemented for use with the ARM Micropulse Lidar (MPL) systems. In addition to retrieving cloud boundaries above 500 m, the value-added product (VAP) named Micropulse Lidar Cloud Mask (MPLCMASK) applies lidar-specific corrections (i.e., range-square, background, deadtime, and overlap) as described in Campbell et al. (2002) to the measured backscattered lidar. Depolarization ratio is computed using the methodology developed by Flynn et al. (2007) for polarization-capable MPL systems. The cloud boundaries output from MPLCMASK will be the primary lidar cloud mask for input to the ARSCL product and will be applied to all MPL systems, including historical data sets.

Sivaraman, C; Comstock, J

2011-07-25T23:59:59.000Z

22

G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Value-Added Product  

SciTech Connect

The G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) value-added product (VAP) computes precipitable water vapor using neural network techniques from data measured by the GVR. The GVR reports time-series measurements of brightness temperatures for four channels located at 183.3 ± 1, 3, 7, and 14 GHz.

Koontz, A; Cadeddu, M

2012-12-05T23:59:59.000Z

23

ARM - VAP Product - bsrncalc  

NLE Websites -- All DOE Office Websites (Extended Search)

Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : BSRNCALC Baseline Solar Radiation Network (BSRN): calculated solar irradiances Active Dates 1993.10.09 -...

24

ARM - VAP Product - pblhtsonde1mcfarl  

NLE Websites -- All DOE Office Websites (Extended Search)

Productspblhtpblhtsonde1mcfarl Productspblhtpblhtsonde1mcfarl Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095386 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : PBLHTSONDE1MCFARL Planetary Boundary Layer Height Value Added Product: Radiosonde Retrievals Active Dates 2001.04.01 - 2014.01.08 Originating VAP Process Planetary Boundary Layer Height : PBLHT Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Dry bulb ambient air temperature degC air_temp ( time ) Altitude above mean sea level m alt Atmospheric pressure hPa atm_pres ( time )

25

ARM - VAP Product - aosccnavg  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaosccnavgaosccnavg Productsaosccnavgaosccnavg Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095312 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : AOSCCNAVG Aerosol Observing System (AOS): cloud condensation nuclei data, averaged Active Dates 2007.05.19 - 2014.01.05 Originating VAP Process Aerosol Observing System (AOS): cloud condensation nuclei data, averaged : AOSCCNAVG Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Cloud condensation nuclei Number concentration of CCN 1/cm^3 N_CCN ( time ) Size distribution of activated nuclei unitless N_CCN_dN ( time, droplet_size )

26

Sonde Adjust Value-Added Product Technical Report  

DOE Green Energy (OSTI)

The Sonde Adjust (SONDEADJUST) value-added product (VAP) creates a file that includes all fields from original Atmospheric Radiation Measurement Climate Research Facility (ARM Facility) radiosonde files and contains several value-added fields that provide adjustments related to well-known humidity issues. SONDEADJUST produces data that correct documented biases in radiosonde humidity measurements. Previous efforts towards applying some of these corrections are available via the discontinued PI product sgpsondecorr1miloC1. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers-the resolution of the instrument-to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes the time-lag problem and uses the dry-bias field as input into the algorithm. In addition to dry bias, solar heating is another correction that is encompassed in the final corrected RH field. Output from SONDEADJUST differs from the previous RH-corrected datastreams in important ways. First, all three types of ARM radiosondes-Vaisala RS-80, RS-90, and RS-92-are corrected using dedicated procedures and/or parameters. Second, the output variables include all of those found in the original radiosonde file: dry bulb temperature, dewpoint temperature, wind speed, wind direction, eastward wind component, northward wind component, wind status (a Vaisala-produced field used in conjunction with the Loran system), ascent rate, and original relative humidity. Additional humidity fields are smoothed relative humidity, dry biased corrected relative humidity, final ambient relative humidity, and scaled adjusted relative humidity. Third, quality control (QC) flags of the fields from the original radiosonde datastream are brought into the SONDEADJUST output file. Additional QC variables are created for the new fields.

Troyan, D

2012-01-09T23:59:59.000Z

27

Cloud Condensation Nuclei Profile Value-Added Product  

SciTech Connect

The cloud condensation nuclei (CCN) concentration at cloud base is the most relevant measure of the aerosol that influences droplet formation in clouds. Since the CCN concentration depends on supersaturation, a more general measure of the CCN concentration is the CCN spectrum (values at multiple supersaturations). The CCN spectrum is now measured at the surface at several fixed ARM sites and by the ARM Mobile Facility (AMF), but is not measured at the cloud base. Rather than rely on expensive aircraft measurements for all studies of aerosol effects on clouds, a way to project CCN measurements at the surface to cloud base is needed. Remote sensing of aerosol extinction provides information about the vertical profile of the aerosol, but cannot be directly related to the CCN concentration because the aerosol extinction is strongly influenced by humidification, particularly near cloud base. Ghan and Collins (2004) and Ghan et al. (2006) propose a method to remove the influence of humidification from the extinction profiles and tie the “dry extinction” retrieval to the surface CCN concentration, thus estimating the CCN profile. This methodology has been implemented as the CCN Profile (CCNPROF) value-added product (VAP).

McFarlane, S; Sivaraman, C; Ghan, S

2012-10-08T23:59:59.000Z

28

Raman Lidar Profiles Best Estimate Value-Added Product Technical Report  

Science Conference Proceedings (OSTI)

The ARM Raman lidars are semi-autonomous ground-based systems that transmit at a wavelength of 355 nm with 300 mJ, {approx}5 ns pulses, and a pulse repetition frequency of 30Hz. Signals from the various detection channels are processed to produce time- and height-resolved estimates of several geophysical quantities, such as water vapor mixing ratio, relative humidity, aerosol scattering ratio, backscatter, optical depth, extinction, and depolarization ratio. Data processing is currently handled by a suite of six value-added product (VAP) processes. Collectively, these processes are known as the Raman Lidar Profiles VAP (RLPROF). The top-level best-estimate (BE) VAP process was introduced in order to bring together the most relevant information from the intermediate-level VAPs. As such, the BE process represents the final stage in data processing for the Raman lidar. Its principal function is to extract the primary variables from each of the intermediate-level VAPs, perform additional quality control, and combine all of this information into a single output file for the end-user. The focus of this document is to describe the processing performed by the BE VAP process.

Newson, R

2012-01-18T23:59:59.000Z

29

ARM - VAP Suggestion Form  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVAP Suggestion Form ProductsVAP Suggestion Form Showcase Data ARM Best Estimate Data Products (ARMBE) This is a collection of data products that represents "best estimates" derived from several instruments and/or VAPs. We are interested in your feedback; please contact us. VAP Update Information on new, existing, and future value-added products for July-September 2013 is now available. Have a VAP idea? Use this form to let us know. Datastream Status Further details on the status of VAPs being processed or developed, can be found at on the ARM Value-Added Product (VAP) Status web page. Use the Data File Inventory tool to view VAP data availability at the file level. Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Suggestion Form

30

ARM - Evaluation Product - Droplet Number Concentration Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsDroplet Number Concentration Value-Added ProductsDroplet Number Concentration Value-Added Product Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Droplet Number Concentration Value-Added Product 2005.01.01 - 2010.12.30 Site(s) SGP General Description Cloud droplet number concentration is an important factor in understanding aerosol-cloud interactions. As aerosol concentration increases, it is expected that droplet number concentration, Nd, will increase and droplet size decrease, for a given liquid water path (Twomey 1977), which will greatly affect cloud albedo as smaller droplets reflect more shortwave radiation. However, the magnitude and variability of these processes under different environmental conditions is still uncertain. McComiskey et al.

31

Aerosol Optical Depth Value-Added Product  

E-Print Network (OSTI)

This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect

A Koontz; G Hodges; J Barnard; C Flynn; J Michalsky; A Koontz; G Hodges; J Barnard; C Flynn; J Michalsky

2013-01-01T23:59:59.000Z

32

ARM - VAP Product - aeri01prof3feltz  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaeriprofaeri01prof3feltz Productsaeriprofaeri01prof3feltz Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027271 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : AERI01PROF3FELTZ Profiles of temperature and water vapor physically retrieved from the AERI spectra Active Dates 2002.04.18 - 2014.01.06 Originating VAP Process AERI Profiles of Water Vapor and Temperature : AERIPROF Description The primary purpose of the "aeriprof3feltz" value-added product (VAP) is to retrieve high temporal resolution temperature (T) and water vapor (q) profiles from Atmospheric Emitted Radiance Interferometer (AERI) observations. Traditionally, temperature and moisture profiles are measured

33

NETL: Utilization Projects - Value Added Products from FGD Sulfite rich  

NLE Websites -- All DOE Office Websites (Extended Search)

Value Added Products from FGD Sulfite rich Scrubber Material Value Added Products from FGD Sulfite rich Scrubber Material In pursuit of developing value added products from sulfite-rich scrubber material, e.g., low-density panels, carpet underlayment, siding, pre-cast building material, lumber panels, particle and wafer type boards, the following four experimental tasks are proposed: A comprehensive characterization of sulfite-rich scrubber materials produced by power plant generation. Specifically, the mercury, selenium, arsenic, boron, and organic content will be monitored The sulfite-rich scrubber material will be combined with cheap but renewable agricultural byproducts like micronized core fibers and/or micronized wheat straw, and the composites will be formulated by exploiting the natural polymers of the byproducts. The conditions under which structural composites can be formulated using injection molding and compressive molding will be evaluated.

34

The Microbase Value-Added Product: A Baseline Retrieval of Cloud Microphysical Properties  

SciTech Connect

This report describes the Atmospheric Radiation Measurement (ARM) Climate Research Facility baseline cloud microphysical properties (MICROBASE) value-added product (VAP). MICROBASE uses a combination of millimeter-wavelength cloud radar, microwave radiometer, and radiosonde observations to estimate the vertical profiles of the primary microphysical parameters of clouds including the liquid/ice water content and liquid/ice cloud particle effective radius. MICROBASE is a baseline algorithm designed to apply to most conditions and locations using a single set of parameterizations and a simple determination of water phase based on temperature. This document provides the user of this product with guidelines to assist in determining the accuracy of the product under certain conditions. Quality control flags are designed to identify outliers and indicate instances where the retrieval assumptions may not be met. The overall methodology is described in this report through a detailed description of the input variables, algorithms, and output products.

Dunn, M; Johnson, K; Jensen, M

2011-05-31T23:59:59.000Z

35

ARM - VAP Product - 30baebbr  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsbaebbr30baebbr Productsbaebbr30baebbr Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027268 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Example 30baebbr Data Plot Example 30baebbr data plot VAP Output : 30BAEBBR EBBR: bulk aerodynamic estimates of sensible & latent heat fluxes, 30-min Active Dates 1993.07.04 - 2013.12.31 Originating VAP Process Best-Estimate Fluxes From EBBR Measurements and Bulk Aerodynamics Calculations : BAEBBR Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Aerodynamic latent heat flux W/m^2 aerodynamic_latent_heat_flux ( time )

36

Training Needs in Louisiana's Value-Added Forest Products Industry  

E-Print Network (OSTI)

Economic Incentives Industry #12;What is Value-Added? The increased value at each stage of a manufacturingThe increased value at each stage of a manufacturing assembly processassembly process Those activities or steps and necessary Addition of net economic valueAddition of net economic value Value can be added through

37

Techniques and Methods Used to Determine the Aerosol Best Estimate Value-Added Product at SGP Central Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Determine the Aerosol Best Estimate Value-Added Product at SGP Central Facility C. Sivaraman, D. D. Turner, and C. J. Flynn Pacific Northwest National Laboratory Richland, Washington Objective Profiles of aerosol optical properties are needed for radiative closure exercises such as the broadband heating rate profile (BBHRP) project (Mlawer et al. 2002) and the Shortwave Quality Measurement Experiment (QME). Retrieving cloud microphysical properties using radiation measurements in the shortwave, such as the spectral retrieval technique described in Daniel et al. (2002), also require the optical properties of the aerosols so that they can be accounted for in the retrieval process. The objective of the aerosol best estimate (ABE) value-added procedure (VAP) is to provide profiles of

38

ARM - VAP Product - 10rlprofbe1turn  

NLE Websites -- All DOE Office Websites (Extended Search)

turn turn Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027251 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Example 10rlprofbe1turn Data Plot Example 10rlprofbe1turn data plot VAP Output : 10RLPROFBE1TURN Raman LIDAR (RL): Best-estimate state of the atmos. profiles from RL & AERI+GOES retrievals Active Dates 1998.03.01 - 2004.01.06 Originating VAP Process Raman LIDAR Vertical Profiles : RLPROF Measurements The measurements below provided by this product are those considered scientifically relevant. Aerosol optical depth Aerosol scattering Backscatter depolarization ratio Backscattered radiation Cloud base height Liquid water content

39

Quarterly VAP Report - April to June  

SciTech Connect

The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the Data Archive. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text. The upcoming milestones and dates are highlighted in green.

Sivaraman, C

2012-08-20T23:59:59.000Z

40

Quarterly VAP Report - January to March  

SciTech Connect

The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text. The upcoming milestones and dates are highlighted in green.

C Sivaraman

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

Point, NC, 27261, USA Tel.: (336) 841 8535 Fax.: (336) 841 5435 151 Randall St. Oakville, ON Canada, L6J SituationThe Situation As global populations continue to grow, the demand for wood products will increase in: Cultures Technology Infrastructure #12;Demand: Overall ClimateDemand: Overal

42

An Atmospheric Radiation Measurement Value-Added Product to Retrieve Optically Thin Cloud Visible Optical Depth using Micropulse Lidar  

Science Conference Proceedings (OSTI)

The purpose of the Micropulse Lidar (MPL) Cloud Optical Depth (MPLCOD) Value-Added Product (VAP) is to retrieve the visible (short-wave) cloud optical depth for optically thin clouds using MPL. The advantage of using the MPL to derive optical depth is that lidar is able to detect optically thin cloud layers that may not be detected by millimeter cloud radar or radiometric techniques. The disadvantage of using lidar to derive optical depth is that the lidar signal becomes attenuation limited when ? approaches 3 (this value can vary depending on instrument specifications). As a result, the lidar will not detect optically thin clouds if an optically thick cloud obstructs the lidar beam.

Lo, C; Comstock, JM; Flynn, C

2006-10-01T23:59:59.000Z

43

Task 4.9 -- Value-added products from syngas  

DOE Green Energy (OSTI)

The work on advanced fuel forms in 1996 focused on the synthesis of higher alcohols from mixtures of hydrogen and carbon dioxide (syngas) from coal gasification. The conversion of coal gasification products to commercially valuable alcohols will provide an important new market for current and future gasification plants. Initial work in this project utilized a novel molybdenum sulfide catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. The support for the active metal sulfide is a layered mixed oxide (hydrotalcite) capable of interaction with the metal sites for catalysis of carbon monoxide reductions. These catalysts have a high surface area, are highly porous, and have basic and acidic functionality. A pressurized fixed-bed flow-through reactor was constructed, and the MoS{sub 2} catalysts were tested with syngas under a variety of conditions. Unfortunately, the catalysts, even with higher molybdenum loading and addition of promoters, failed to give alcohol products. A batch reactor test of the catalyst was also conducted, but did not produce alcohol products. Group 8 metals have been used previously in catalysts for syngas reactions. Ruthenium and rhodium catalysts were prepared by impregnation of a hydrotalcite support. Tests with these catalysts in flow-through reactors also did not produce the desired alcohol products. The formation of higher alcohols from smaller ones, such as methanol and ethanol, could be commercially important if high selectivity could be achieved. The methanol and ethanol would be derived from syngas and fermentation, respectively. Based on previous work in other laboratories, it was hypothesized that the hydrotalcite supported MoS{sub 2} or Ru or Rh catalysts could catalyze the formation of butyl alcohols. Although the desired 1-butanol was obtained in batch reactions with the promoted Ru catalyst, the reaction was not as selective as desired. Product suitable for a lower-vapor-pressure gasoline oxygenate additive was obtained, but it may not be economical to market such products in competition with methyl tertiary-butyl-ether. Flow-through catalytic bed reactions were not successful.

Olson, E.S.; Sharma, R.K.

1997-02-01T23:59:59.000Z

44

ARM - VAP Product - 10rlprofmr1turn  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Plot Example 10rlprofmr1turn data plot VAP Output : 10RLPROFMR1TURN Raman LIDAR (RL): water vapor mixing ratio and relative humidity profiles, along with PWV Active...

45

VAP Development: Initiation, Development, Evaluation, and Release  

SciTech Connect

This white paper provides a plan to formalize the evaluation of newly developed VAPs and a framework for the development of value-added products through four different stages: Initiation, Development, Evaluation, and Release.

Jensen, M; Collis, Fast, J; Flynn, C; Mather, J; McFarlane, S; Monroe, J; Sivaraman, C; Xie, S

2011-02-23T23:59:59.000Z

46

DOE/SC-ARM/TR-124 Interpolated Sounding Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Interpolated Sounding Value-Added Product D Troyan February 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United...

47

DOE/SC-ARM/TR-098 Micropulse Lidar Cloud Mask Value-Added Product...  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Micropulse Lidar Cloud Mask Value-Added Product Technical Report C Sivaraman J Comstock July 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S....

48

ARM - VAP Product - 10rlprofdep1turn  

NLE Websites -- All DOE Office Websites (Extended Search)

rlprofdep1turn rlprofdep1turn Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027252 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Example 10rlprofdep1turn Data Plot Example 10rlprofdep1turn data plot VAP Output : 10RLPROFDEP1TURN 10-minute Raman Lidar: aerosol depolarization profiles and single layer cloud optical depths from first Turner algorithm Active Dates 1998.03.01 - 2013.12.28 Originating VAP Process Raman LIDAR Vertical Profiles : RLPROF Description The primary goal of the Raman Lidar Profiles - Depolarization Ratio (RLPROF_DEP) VAP is to produce linear depolarization ratio profiles. Linear depolarization is defined as the ratio of the cross-polarized return to the

49

MWRRET Value-Added Product: The Retrieval of Liquid Water Path and Precipitable Water Vapor from Microwave Radiometer (MWR) Data Sets (Revision 2)  

SciTech Connect

This report provides a short description of the Atmospheric Radiation Measurement (ARM) Climate Research Facility microwave radiometer (MWR) Retrieval (MWRRET) value-added product (VAP) algorithm. This algorithm utilizes a complementary physical retrieval method and applies brightness temperature offsets to reduce spurious liquid water path (LWP) bias in clear skies resulting in significantly improved precipitable water vapor (PWV) and LWP retrievals. We present a general overview of the technique, input parameters, output products, and describe data quality checks. A more complete discussion of the theory and results is given in Turner et al. (2007b).

Gaustad, KL; Turner, DD; McFarlane, SA

2011-07-25T23:59:59.000Z

50

ARM - VAP Product - surfspecalb1mlawer  

NLE Websites -- All DOE Office Websites (Extended Search)

Productssurfspecalbsurfspecalb1mlawer Productssurfspecalbsurfspecalb1mlawer Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095394 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : SURFSPECALB1MLAWER Surface Spectral Albedo Active Dates 1998.04.07 - 2013.11.04 Originating VAP Process Surface Spectral Albedo : SURFSPECALB Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Altitude above mean sea level m alt Base time in Epoch seconds since 1970-1-1 0:00:00 0:00 base_time Best estimate Best measured hemispheric broadband irradiance from mfrsrC1 W/m^2 be_hemisp_broadband_mfrsr ( time )

51

ARM - VAP Product - mwrret1liljclou  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsmwrretmwrret1liljclou Productsmwrretmwrret1liljclou Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027369 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : MWRRET1LILJCLOU Microwave Radiometer Retrievals (MWRRET) of Cloud Liquid Water and Precipitable Water Vapor Active Dates 1996.09.01 - 2014.01.05 Originating VAP Process MWR Retrievals : MWRRET Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable altitude m alt Base time in Epoch seconds since 1970-1-1 0:00:00 0:00 base_time Liquid water path Liquid water path best-estimate value g/m^2 be_lwp ( time )

52

ARM - VAP Product - mfrsraod1mich  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaodmfrsraod1mich Productsaodmfrsraod1mich Documentation Technical Report Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1027295 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : MFRSRAOD1MICH MFRSR: derived total & aerosol optical depth from 1st Michalsky algorithm Active Dates 1997.02.08 - 2013.10.31 Originating VAP Process Aerosol Optical Depth : AOD Description These two images show data plots of cloud-screened AOD at the AMF site in China collected on a 20-second interval during daylight hours. These two days show drastically different aerosol optical depths. These two images show data plots of cloud-screened AOD at the AMF site in

53

ARM - VAP Product - pblhtsondeyr1mcfarl  

NLE Websites -- All DOE Office Websites (Extended Search)

Productspblhtpblhtsondeyr1mcfarl Productspblhtpblhtsondeyr1mcfarl Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095387 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : PBLHTSONDEYR1MCFARL Planetary Boundary Layer Height: Radiosonde Retrievals with yearly output Active Dates 2001.04.01 - 2012.12.31 Originating VAP Process Planetary Boundary Layer Height : PBLHT Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable Altitude above mean sea level m alt ( time ) Base time in Epoch seconds since 1970-1-1 0:00:00 0:00 base_time Day unitless day ( time )

54

ARM - VAP Product - rlccnprof1ghan  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsccnprofrlccnprof1ghan Productsccnprofrlccnprof1ghan Documentation Data Management Facility Plots (Quick Looks) Citation DOI: 10.5439/1095389 [ What is this? ] Generate Citation ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP Output : RLCCNPROF1GHAN CCN Profile using Ghan algorithm Active Dates 2006.09.15 - 2013.09.27 Originating VAP Process Cloud Condensation Nuclei Profile : CCNPROF Measurements Only measurements considered scientifically relevant are shown below by default. Show all measurements Measurement Units Variable AOS CCN sample supersaturation calculated by model % CCN_ss_calc ( time, ss_step ) Standard deviation of AOS CCN sample supersaturation calculated by model. % CCN_ss_calc_std_dev ( time, bins )

55

Ceramic membranes for partial oxygenation of hydrocarbon fuels to high-value-added products  

DOE Patents (OSTI)

This report describes the design of a membrane reactor for converting methane into value added products. The design includes an outer tube of perovskite which contacts air, an inner tube of zirconium oxide which contacts methane, and a bonding layer of a mixture of zirconium oxide and perovskite.

Balachandran, U.; Dusek, J.T.; Kleefisch, M.S.; Kobylinski, T.P.

1994-12-31T23:59:59.000Z

56

ARM - VAP Process - interpsonde  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsinterpsonde Productsinterpsonde Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Interpolated Sonde (INTERPSONDE) Instrument Categories Atmospheric Profiling, Derived Quantities and Models The INTERPSONDE value-added product (VAP) is a modification of the MERGESONDE VAP that produces a daily file of thermodynamic variables from radiosonde soundings, the microwave radiometer, and surface meteorological instruments. This product does not incorporate ECMWF model output. INTERPSONDE includes many of the same sophisticated scaling/interpolation/smoothing schemes that are the hallmark of MERGESONDE, but there are benefits to excluding ECMWF model output. These

57

Microsoft Word - ARM Value-Added Product_tech_rpt_v2.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

77 77 An Atmospheric Radiation Measurement Value-Added Product to Retrieve Optically Thin Cloud Visible Optical Depth using Micropulse Lidar October 2006 Chaomei Lo Jennifer M. Comstock Connor Flynn Pacific Northwest National Laboratory Richland, Washington Work supported by the U.S. Department of Energy, Office of Energy Research, Office of Biological and Environmental Research C Lo, JM Comstock, C Flynn, October 2006, ARM TR-077 iii Contents 1 Introduction .......................................................................................................................................... 1 2 Input Data.............................................................................................................................................

58

Method for conversion of carbohydrate polymers to value-added chemical products  

DOE Patents (OSTI)

Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

Zhang, Zongchao C. (Norwood, NJ); Brown, Heather M. (Kennewick, WA); Su, Yu (Richland, WA)

2012-02-07T23:59:59.000Z

59

Functionally gradient material for membrane reactors to convert methane gas into value-added products  

DOE Patents (OSTI)

A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials. 7 figs.

Balachandran, U.; Dusek, J.T.; Kleefisch, M.S.; Kobylinski, T.P.

1996-11-12T23:59:59.000Z

60

Functionally gradient material for membrane reactors to convert methane gas into value-added products  

DOE Patents (OSTI)

A functionally gradient material for a membrane reactor for converting methane gas into value-added-products includes an outer tube of perovskite, which contacts air; an inner tube which contacts methane gas, of zirconium oxide, and a bonding layer between the perovskite and zirconium oxide layers. The bonding layer has one or more layers of a mixture of perovskite and zirconium oxide, with the layers transitioning from an excess of perovskite to an excess of zirconium oxide. The transition layers match thermal expansion coefficients and other physical properties between the two different materials.

Balachandran, Uthamalingam (Hinsdale, IL); Dusek, Joseph T. (Lombard, IL); Kleefisch, Mark S. (Napersville, IL); Kobylinski, Thadeus P. (Lisle, IL)

1996-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Value-Added Products from FGD Sulfite-Rich Scrubber Materials  

SciTech Connect

According to the American Coal Ash Association, about 29.25 million tons of flue gas desulfurization (FGD) byproducts were produced in the USA in 2003. Out of 29.25 million tons, 17.35 million tons were sulfite-rich scrubber materials. At present, unlike its cousin FGD gypsum, the prospect for effective utilization of sulfite-rich scrubber materials is not bright. In fact, almost 16.9 million tons are leftover every year. In our pursuit to mitigate the liability of sulfite-rich FGD scrubber materials' disposal, we are attempting to develop value-added products that can commercially compete. More specifically, for this Innovative Concept Phase I project, we have the following objectives: to characterize the sulfite-rich scrubber material for toxic metals; to optimize the co-blending and processing of scrubber material and natural byproducts; to formulate and develop structural composites from sulfite-rich scrubber material; and to evaluate the composites' mechanical properties and compare them with current products on the market. After successfully demonstrating the viability of our research, a more comprehensive approach will be proposed to take these value-added materials to fruition.

Vivak Malhotra

2010-01-31T23:59:59.000Z

62

DOE/SC-ARM/TR-115 Aerosol Best Estimate (AEROSOLBE) Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 Aerosol Best Estimate (AEROSOLBE) Value-Added Product C Flynn D Turner A Koontz D Chand C Sivaraman July 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or

63

DOE/SC-ARM/TR-087 Merged Sounding Value-Added Product D Troyan  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 Merged Sounding Value-Added Product D Troyan March 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and

64

Value Added Products from Hemicellulose Utilization in Dry Mill Ethanol Plants  

Science Conference Proceedings (OSTI)

The Iowa Corn Promotion Board is the principal contracting entity for this grant funded by the US Department of Agriculture and managed by the US Department of Energy. The Iowa Corn Promotion Board subcontracted with New Jersey Institute of Technology, KiwiChem, Pacific Northwest National Lab and Idaho National Lab to conduct research for this project. KiwiChem conducted the economic engineering assessment of a dry-mill ethanol plant. New Jersey Institute of Technology conducted work on incorporating the organic acids into polymers. Pacific Northwest National Lab conducted work in hydrolysis of hemicellulose, fermentation and chemical catalysis of sugars to value-added chemicals. Idaho National Lab engineered an organism to ferment a specific organic acid. Dyadic, an enzme company, was a collaborator which provided in-kind support for the project. The Iowa Corn Promotion Board collaborated with the Ohio Corn Marketing Board and the Minnesota Corn Merchandising Council in providing cost share for the project. The purpose of this diverse collaboration was to integrate the hydrolysis, the conversion and the polymer applications into one project and increase the likelihood of success. This project had two primary goals: (1) to hydrolyze the hemicellulose fraction of the distillers grain (DG) coproduct coming from the dry-mill ethanol plants and (2) convert the sugars derived from the hemicellulose into value-added co-products via fermentation and chemical catalysis.

Rodney Williamson, ICPB; John Magnuson, PNNL; David Reed, INL; Marco Baez, Dyadic; Marion Bradford, ICPB

2007-03-30T23:59:59.000Z

65

Value-Added Products From FGD Sulfite-Rich Scrubber Materials  

DOE Green Energy (OSTI)

Massive quantities of sulfite-rich flue gas desulfurization (FGD) scrubber materials are produced every year in the USA. In fact, at present, the production of wet sulfite-rich scrubber cake outstrips the production of wet sulfate-rich scrubber cake by about 6 million tons per year. However, most of the utilization focus has centered on FGD gypsum. Therefore, we have recently initiated research on developing new strategies for the economical, but environmentally-sound, utilization of sulfite-rich scrubber material. In this exploratory project (Phase I), we attempted to ascertain whether it is feasible to develop reconstituted wood replacement products from sulfite-rich scrubber material. In pursuit of this goal, we characterized two different wet sulfite-rich scrubber materials, obtained from two power plants burning Midwestern coal, for their suitability for the development of value-added products. The overall strategy adopted was to fabricate composites where the largest ingredient was scrubber material with additional crop materials as additives. Our results suggested that it may be feasible to develop composites with flexural strength as high as 40 MPa (5800 psi) without the addition of external polymers. We also attempted to develop load-bearing composites from scrubber material, natural fibers, and phenolic polymer. The polymer-to-solid ratio was limited to {le} 0.4. The formulated composites showed flexural strengths as high as 73 MPa (10,585 psi). We plan to harness the research outcomes from Phase I to develop parameters required to upscale our value-added products in Phase II.

Vivak M. Malhotra

2006-09-30T23:59:59.000Z

66

Process for Converting Waste Glass Fiber into Value Added Products, Final Report  

Science Conference Proceedings (OSTI)

Nature of the Event: Technology demonstration. The project successfully met all of its technical objectives. Albacem has signed an exclusive licensing agreement with Vitro Minerals Inc., a specialty minerals company, to commercialize the Albacem technology (website: www.vitrominerals.com). Location: The basic research for the project was conducted in Peoria, Illinois, and Atlanta, Georgia, with third-party laboratory verification carried out in Ontario, Canada. Pilot-scale trials (multi-ton) were conducted at a facility in South Carolina. Full-scale manufacturing facilities have been designed and are scheduled for construction by Vitro Minerals during 2006 at a location in the Georgia, North Carolina, and South Carolina tri-state area. The Technology: This technology consists of a process to eliminate solid wastes generated at glass fiber manufacturing facilities by converting them to value-added materials (VCAS Pozzolans) suitable for use in cement and concrete applications. This technology will help divert up to 250,000 tpy of discarded glass fiber manufacturing wastes into beneficial use applications in the concrete construction industry. This technology can also be used for processing glass fiber waste materials reclaimed from monofills at manufacturing facilities. The addition of take-back materials and reclamation from landfills can help supply over 500,000 tpy of glass fiber waste for processing into value added products. In the Albacem process, waste glass fiber is ground to a fine powder that effectively functions as a reactive pozzolanic admixture for use in portland ce¬ment-based building materials and products, such as concrete, mortars, terrazzo, tile, and grouts. Because the waste fiber from the glass manufacturing industry is vitreous, clean, and low in iron and alkalis, the resulting pozzolan is white in color and highly consistent in chemical composition. This white pozzolan, termed VCAS Pozzolan (for Vitreous Calcium-Alumino-Silicate). is especially suited for white concrete applications where it imparts desirable benefits such as increased long-term strength and improved long-term durability of concrete products. Two U.S. patents entitled have been issued to Albacem covering the technology. Third-party validation testing has confirmed that the pozzolanic product is an excellent, high performance material that conforms to a ASTM standards and improves the strength and durability of concrete. Currently, there are no known significant competing technologies to process glass fiber manufacturing by-products and con¬vert them into value-added products. Most glass fiber-forming and fabrication wastes continue to be disposed in landfills at significant costs and with associated negative environmental impact. It is estimated that in a typical glass fiber manufactur¬ing facility, 10-20% by weight of the processed glass material is sent for dis¬posal to a landfill. Today, supplementary ce¬menting materials or mineral admixtures are key to achieving strong and durable concrete. Recovered materials such as coal fly ash, ground granulated blast furnace slag and silica fume are widely accepted and used in concrete all over the world, espe¬cially in the construction of “high performance” structures such as massive dams, bridges, subway tunnels, etc. These min¬eral admixtures are not suitable for white concrete and light-colored architectural concrete applications. Converting waste glass fibers into a high performance white pozzolan would allow white concrete producers to gain from the same durability benefits currently realized by gray concrete producers. Description of the Benefit: Albacem’s technology will enable the glass fiber industry to eliminate nearly 100% of its glass fiber produc¬tion waste streams by converting them into viable value-added products. With this technology, the glass industry can prevent the landfilling of about 250,000 tons of waste glass fiber annually. Glass manufacturers will realize improved production efficiency by reducing process costs through the elimination of solid was

Hemmings, Raymond T.

2005-12-31T23:59:59.000Z

67

Recent Developments on the Broadband Heating Rate Profile Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

Recent Developments on the Recent Developments on the Broadband Heating Rate Profile Value-Added Product E. J. Mlawer, J. S. Delamere, and S. A. Clough Atmospheric and Environmental Research, Inc. Cambridge, Massachusetts M. A. Miller and K. L. Johnson Brookhaven National Laboratory Upton, New York T. R. Shippert and C. N. Long Pacific Northwest National Laboratory Richland, Washington R. G. Ellingson Florida State University Tallahassee, Florida M. H. Zhang State University of New York - Stony Brook Albany, New York R. A. Ferrare National Aeronautics and Space Administration Langley Research Center Hampton, Virginia R. T. Cederwall and S. C. Xie Los Alamos National Laboratory Los Alamos, New Mexico J. A. Ogren National Oceanic and Atmospheric Administration

68

Soybeans as Functional Foods and IngredientsChapter 9 Value-Added Products from Extruding-Expelling of Soybeans  

Science Conference Proceedings (OSTI)

Soybeans as Functional Foods and Ingredients Chapter 9 Value-Added Products from Extruding-Expelling of Soybeans Food Science Health Nutrition Biochemistry eChapters Food Science & Technology Health - Nutrition - Biochemistry Press

69

ARM - VAP Process - gvrpwv  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsgvrpwv Productsgvrpwv Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) Instrument Categories Radiometric The G-Band Vapor Radiometer Precipitable Water Vapor (GVRPWV) value-added product (VAP) computes precipitable water vapor using neural network techniques from data measured by the GVR. The GVR reports time-series measurements of brightness temperatures for four channels located at 183.3 ± 1, 3, 7, and 14 GHz. For more details, see the technical report. Output Products gvr : G-band (183 GHz) Vapor Radiometer Primary Measurements The following measurements are those considered scientifically relevant.

70

ARM - VAP Process - aod  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaod Productsaod Documentation & Plots Technical Report (1) Technical Report (2) Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Aerosol Optical Depth (AOD) Instrument Categories Derived Quantities and Models The core purpose of the ARM Facility is to reduce uncertainties in climate model predictions. A dominant source of uncertainty in these models is the radiative impact of aerosols, which has spawned a major effort in ARM to measure aerosol properties. The Aerosol Optical Depth (AOD) value-added product (VAP) is concerned with several important aerosol radiative properties. The most important of these is the aerosol optical depth (AOD), which is a measure of the total aerosol

71

ARM - VAP Process - aip  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaip Productsaip Documentation & Plots Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Aerosol Intensive Properties (AIP) Instrument Categories Aerosols The aip1ogren value-added product (VAP) computes several aerosol intensive properties. It requires as input calibrated, corrected, aerosol extensive properties from the Aerosol Observing Station (AOS). Aerosol extensive properties depend on both the nature of the aerosol and the amount of the aerosol. Intensive properties are independent of aerosol amount, depending only on the nature of the specific aerosol. The intensive properties of hygroscopic growth factor, aerosol single-scattering albedo,

72

Assessing the Economic Viability of Bio-based Products for Missouri Value-added Crop Production  

DOE Green Energy (OSTI)

While research and development on biobased products has continued strong over the years, parallel attention on the economics and management of such product innovation has been lacking. With the financial support of the Department of Energy, the Economics and Management of Agrobiotechnology Center at the University of Missouri-Columbia has launched a pilot graduate education program that seeks to fill the gap. Within this context, a multi-disciplinary research and teaching program has been structured with an emphasis on new product and innovation economics and management. More specifically, this pilot graduate education program has the following major objectives: (1) To provide students with a strong background in innovation economics, management, and strategy. (2) To diversify the students academic background with coursework in science and technology. (3) To familiarize the student with biobased policy initiatives through interaction with state and national level organizations and policymakers. (4) To facilitate active collaboration with industry involved in the development and production of biobased products. The pilot education program seeks to develop human capital and research output. Although the research is, initially, focused on issues related to the State of Missouri, the results are expected to have national implications for the economy, producers, consumers and environment.

Nicholas Kalaitzandonakes

2005-11-30T23:59:59.000Z

73

ARM - VAP Process - visst  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsvisst Productsvisst Documentation & Plots visst : XDC documentation Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Minnis Cloud Products Using Visst Algorithm (VISST) Instrument Categories Cloud Properties, Satellite Observations General Overview Satellite based retrievals of cloud and radiation properties are available in this value-added product provided by Pat Minnis' group at NASA/Langley using the VISST (Visible Infrared Solar-Infrared Split Window Technique) algorithm. These datastreams are both pixel-level (4-km) retrievals and averages on a 0.3 or 0.5 degree latitude-longitude grid and replace earlier satellite-based retrievals on the Layered Bispectral Threshold Method

74

DOE/SC-ARM/TR-129 Aerosol Optical Depth Value-Added Product  

NLE Websites -- All DOE Office Websites (Extended Search)

Product A Koontz C Flynn G Hodges J Michalsky J Barnard March 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the...

75

ARM - VAP Process - aosccnavg  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsaosccnavg Productsaosccnavg Documentation & Plots Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Aerosol Observing System (AOS): cloud condensation nuclei data, averaged (AOSCCNAVG) Instrument Categories Aerosols This value-added product was developed to consolidate the relevant cloud condensation nuclei (CCN) parameters into a single file and averaged the data over the 5-minute integration time of each percent supersaturation (%ss) value. The surface sites measure the CCN concentration at several supersaturations using a single-column CCN counter (Roberts and Nenes, 2005). The percent supersaturation of the instrument is stepped through

76

DOE/SC-ARM/TR-120 Raman Lidar Profiles–Temperature (RLPROFTEMP) Value-Added Product  

E-Print Network (OSTI)

This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect

Rk Newsom; C Sivaraman; Sa Mcfarlane; C Sivaraman; Sa Mcfarlane

2012-01-01T23:59:59.000Z

77

DOE/SC-ARM/TR-100 Raman Lidar Profiles Best Estimate Value-Added Product Technical Report  

NLE Websites -- All DOE Office Websites (Extended Search)

0 0 Raman Lidar Profiles Best Estimate Value-Added Product Technical Report R Newsom January 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and

78

DOE/SC-ARM/TR-095 The Microbase Value-Added Product: A Baseline Retrieval of Cloud  

NLE Websites -- All DOE Office Websites (Extended Search)

5 5 The Microbase Value-Added Product: A Baseline Retrieval of Cloud Microphysical Properties M Dunn K Johnson M Jensen May 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or

79

Production of coal-based fuels and value-added products: coal to liquids using petroleum refinery streams  

SciTech Connect

We are studying several processes that utilize coal, coal-derived materials, or biomass in existing refining facilities. A major emphasis is the production of a coal-based replacement for JP-8 jet fuel. This fuel is very similar to Jet A and jet A-1 in commercial variation, so this work has significant carry-over into the private sector. We have been focusing on three processes that would be retrofitted into a refinery: (1) coal tar/refinery stream blending and hydro-treatment; (2) coal extraction using refinery streams followed by hydro-treatment; and (3) co-coking of coal blended with refinery streams. 4 figs., 5 tabs.

Clifford, C.E.B.; Schobert, H.H. [Pennsylvania State University, PA (United States)

2008-07-01T23:59:59.000Z

80

Task 4.9 -- Value-added products from syngas. Semi-annual report, July 1--December 31, 1996  

DOE Green Energy (OSTI)

The work on advanced fuel forms in 1996 focused on the synthesis of higher alcohols from mixtures of hydrogen and carbon dioxide (syngas) from coal gasification. Initial work in this project utilized a novel molybdenum sulfide catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. A pressurized fixed-bed flow-through reactor was constructed, and the MoS{sub 2} catalysts were tested with syngas under a variety of conditions. Unfortunately, the catalysts, even with higher molybdenum loading and addition of promoters, failed to give alcohol products. A batch reactor test of the catalyst was also conducted, but did not produce alcohol products. Group VIII metals have been used previously in catalysts for syngas reactions. Ruthenium and rhodium catalysts were prepared by impregnation of a hydrotalcite support. Tests with these catalysts in flow-through reactors also did not produce the desired alcohol products. The formation of higher alcohols from smaller ones, such as methanol and ethanol, could be commercially important if high selectivity could be achieved. The methanol and ethanol would be derived from syngas and fermentation, respectively. Based on previous work in other laboratories, it was hypothesized that the hydrotalcite-supported MoS{sub 2} or Ru or Rh catalysts could catalyze the formation of butyl alcohols. Although the desired 1-butanol was obtained in batch reactions with the promoted ruthenium catalyst, the reaction was not as selective as desired. Product suitable for a lower-vapor-pressure gasoline oxygenate additive was obtained, but it may not be economical to market such products in competition with methyl tertiary-butyl ether (MTBE). Flow-through catalytic bed reactions were not successful.

Olson, E.S.; Sharma, R.K.

1997-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Task 4.9 -- Value-added products from syngas. Semi-annual report, January 1--June 30, 1996  

SciTech Connect

The work on advanced fuel forms in 1996 is focused in part on the synthesis of higher alcohols from mixtures of hydrogen and carbon monoxide (syngas) from coal gasification. This art has been practiced for many years in Germany, South Africa, and the US. The conversion of coal gasification products to commercially valuable alcohols will provide an important new market for current and future gasification plants. Initial work in this project utilized a novel molybdenum catalyst previously shown to be active for hydrodesulfurization reactions of coal liquids. This support for the active metal is a mixed oxide capable of interaction with the metal sites for catalysis of carbon monoxide reductions. A pressurized fixed-bed flow-through reactor was constructed and one catalyst was tested under a variety of conditions. Unfortunately, this catalyst with low metal loading was inactive. Therefore, a catalyst with a high metal loading and additional metal sites (cobalt, potassium) is now being tested.

1997-08-01T23:59:59.000Z

82

ECOR VAP Flux Corrections, Gap-filling, and Results David R. Cook, Meredith Franklin, Donna J. Holdridge  

NLE Websites -- All DOE Office Websites (Extended Search)

ECOR VAP Flux Corrections, Gap-filling, and Results ECOR VAP Flux Corrections, Gap-filling, and Results David R. Cook, Meredith Franklin, Donna J. Holdridge Argonne National Laboratory, Argonne, IL This work was supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research, Climate Change Research Division, under contract DE-AC02-06CH11357, as part of the Atmospheric Radiation Measurement Program. Argonne National Laboratory is managed by UChicago Argonne, LLC for the U.S. Department of Energy ABSTRACT An eddy correlation (ECOR) value-added product (VAP) has been developed that uses ECOR temperature, humidity, and wetness state (or default values of the same) to determine corrections to and gap-filling of the flux measurements. An outlier routine is used to remove obvious incorrect data before gap-filling is performed.

83

Missouri Value-Added Grant Program (Missouri) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Value-Added Grant Program (Missouri) Value-Added Grant Program (Missouri) Missouri Value-Added Grant Program (Missouri) < Back Eligibility Agricultural Commercial Fuel Distributor General Public/Consumer Industrial Retail Supplier Systems Integrator Transportation Utility Program Info State Missouri Program Type Grant Program Provider Missouri Department of Agriculture The Missouri Value-Added Grant Program provides grants for projects that add value to Missouri agricultural products and aid the economy of a rural community. Grant applications will be considered for value-added agricultural business concepts that: (a) Lead to and result in development, processing and marketing of new or expanded uses or technologies for agricultural products; and (b) Foster agricultural economic development in Missouri's rural communities. Applications will be considered for

84

Value-Added Stock Loan Participation Program | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Value-Added Stock Loan Participation Program Value-Added Stock Loan Participation Program Value-Added Stock Loan Participation Program < Back Eligibility Agricultural Savings Category Bioenergy Solar Buying & Making Electricity Wind Maximum Rebate RFA provides up to 45% of the loan up to $40,000 of loan principal Program Info Start Date 1994 State Minnesota Program Type State Loan Program Provider Minnesota Department of Agriculture The Value-Added Stock Loan Participation Program was created in 1994 and is designed to help farmers finance the purchase of stock in certain types of cooperative, limited liability company, or limited liability partnership that will produce a "value-added agricultural product." This may include wind energy and anaerobic-digestion cooperatives if they meet the

85

ARM - VAP Process - abrfc  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsabrfc Productsabrfc Documentation & Plots abrfc : XDC documentation Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Arkansas-Red Basin River Forecast Center (ABRFC) Instrument Categories Surface Meteorology General Overview Every hour a gridded (4 km x 4 km) precipitation field is created. This field is a combination of both WSR-88D Nexrad radar precipitation estimates and rain gauge reports. The ABRFC performs extensive quality control on these data. For more details, see the External Data Center web page. Output Products abrfcprecip : Arkansas-Red Basin River Forecast Center: estimated precipitation Primary Measurements The following measurements are those considered scientifically relevant.

86

ARM - VAP Process - tdmadap  

NLE Websites -- All DOE Office Websites (Extended Search)

Productstdmadap Productstdmadap Documentation & Plots tdmadap : XDC documentation Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Aerosol Properties derived from TDMA Measurements (TDMADAP) Instrument Categories Aerosols Output Products tdmaccncoll : Tandem Differential Mobility Analyzer: Cloud Condensation Nuclei -- D. Collins Primary Measurements The following measurements are those considered scientifically relevant. Cloud condensation nuclei Locations Southern Great Plains SGP X1 Browse Data External Data (satellites and others) Contact(s) Alison Tilp (631) 344-4465 tilp@bnl.gov Alison Tilp Developer (631) 344-4465 tilp@bnl.gov Connor Flynn Translator

87

Electricity Restructuring and Value-Added Services  

E-Print Network (OSTI)

LBNL-46069 Electricity Restructuring and Value- Added Services: Beyond the Hype William Golove under Contract No. DE-AC03- 76SF00098. #12;Electricity Restructuring and Value-Added Services: Beyond with non- residential electricity service customers who have chosen to take service from a retail electric

88

ARM - VAP Process - pblht  

NLE Websites -- All DOE Office Websites (Extended Search)

Productspblht Productspblht Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Planetary Boundary Layer Height (PBLHT) Instrument Categories Atmospheric Profiling Quicklook plot showing all PBL height estimates produced by the PBLHT VAP for the 05:30 UTC, April 10, 2004, radiosonde at the Southern Great Plains (SGP) site. Quicklook plot showing all PBL height estimates produced by the PBLHT VAP for the 05:30 UTC, April 10, 2004, radiosonde at the Southern Great Plains (SGP) site. Annual summary of PBL height estimates produced by the VAP Liu-Liang method for 2004 at SGP. Annual summary of PBL height estimates produced by the VAP Liu-Liang method

89

ARM - VAP Process - bsrncalc  

NLE Websites -- All DOE Office Websites (Extended Search)

to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Baseline Solar Radiation Network (BSRN): calculated solar irradiances (BSRNCALC) Note:bsrncalc is...

90

Bacterial Carbon Storage to Value Added Products  

E-Print Network (OSTI)

PhaR from Paracoccus denitrificans functions as a repressor or autoregulator of the expression of genes encoding phasin protein (PhaP) and PhaR itself, both of which are components of polyhydroxyalkanoate (PHA) granules ...

Brigham, Christopher J.

91

ARM - VAP Process - surfspecalb  

NLE Websites -- All DOE Office Websites (Extended Search)

Productssurfspecalb Productssurfspecalb Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Surface Spectral Albedo (SURFSPECALB) Instrument Categories Surface/Subsurface Properties Example quicklook from the SURFSPECALB VAP. The plot shows the estimated spectral albedo at SGP for the 10-m and 25-m towers on September 11, 2004. On this day, the surface type for both towers is partial vegetation. Example quicklook from the SURFSPECALB VAP. The plot shows the estimated spectral albedo at SGP for the 10-m and 25-m towers on September 11, 2004. On this day, the surface type for both towers is partial vegetation.

92

ARM - VAP Process - sfccldgrid  

NLE Websites -- All DOE Office Websites (Extended Search)

Productssfccldgrid Productssfccldgrid Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Surface Cloud Grid (SFCCLDGRID) Instrument Categories Cloud Properties, Derived Quantities and Models The Surface Cloud Grid VAP uses as input the 15-minute output from the Shortwave Flux Analysis VAP (Long, 2001; Long and Ackerman, 2000; Long et al., 1999) from the Southern Great Plains (SGP) Central and Extended Facilities. It applies a multi-pass weighted sum analytic approximation technique (Caracena, 1987), which uses Gaussian weighting and an imposed scale length, to interpolate to a 0.25 degree by 0.25 degree lat/long grid

93

ARM - VAP Process - baebbr  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsbaebbr Productsbaebbr Documentation & Plots Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Best-Estimate Fluxes From EBBR Measurements and Bulk Aerodynamics Calculations (BAEBBR) Instrument Categories Derived Quantities and Models The BAEBBR VAP calculates the bulk aerodynamic latent and sensible heat fluxes from Energy Balance Bowen Ratio (EBBR) Station meteorological measurements and uses these in place of the EBBR flux measurements when the Bowen ratio is between -1.6 and -0.45. The resultant dataset is considered to provide the "best estimate" of the diurnal cycle of fluxes. For more details, see http://science.arm.gov/vaps/baebbr.stm.

94

ARM - VAP Process - mplnor  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsmplnor Productsmplnor Documentation & Plots Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Normalized Backscatter Profiles from the Micropulse Lidar (MPLNOR) Instrument Categories Cloud Properties This VAP has two primary purposes: to apply the appropriate corrections to create normalized backscatter profiles from the MPL, and to detect all significant cloud boundaries from this normalized dataset. The corrections included in the normalization process include background subtraction, a correction for the afterpulsing (ringing) of the detector, an correction for the disparity between the laser and detector's field-of-view (overlap),

95

ARM - VAP Process - diffcor  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsdiffcor Productsdiffcor Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Correction of Diffuse Shortwave Measurements (DIFFCOR) Instrument Categories Derived Quantities and Models The DIFFCORR1DUTT VAP uses two techniques to correct shortwave (SW) data during daytime hours, using information from a collocated pyrgeometer. First, the detector-only correction technique uses data in the form of irradiance loss from the pyrgeometer detector. Second, the full-correction technique uses information from collocated pyrgeometer detector data, plus the difference between the case and dome temperatures. Both techniques

96

Best Estimate Radiation Flux Value-Added Procedure: Algorithm Operational Details and Explanations  

SciTech Connect

This document describes some specifics of the algorithm for best estimate evaluation of radiation fluxes at Southern Great Plains (SGP) Central Facility (CF). It uses the data available from the three co-located surface radiometer platforms at the SGP CF to automatically determine the best estimate of the irradiance measurements available. The Best Estimate Flux (BEFlux) value-added procedure (VAP) was previously named Best Estimate ShortWave (BESW) VAP, which included all of the broadband and spectral shortwave (SW) measurements for the SGP CF. In BESW, multiple measurements of the same quantities were handled simply by designating one as the primary measurement and using all others to merely fill in any gaps. Thus, this “BESW” is better termed “most continuous,” since no additional quality assessment was applied. We modified the algorithm in BESW to use the average of the closest two measurements as the best estimate when possible, if these measurements pass all quality assessment criteria. Furthermore, we included longwave (LW) fields in the best estimate evaluation to include all major components of the surface radiative energy budget, and renamed the VAP to Best Estimate Flux (BEFLUX1LONG).

Shi, Y; Long, CN

2002-10-01T23:59:59.000Z

97

Value Added Energy Information Systems VAEIS | Open Energy Information  

Open Energy Info (EERE)

Value Added Energy Information Systems VAEIS Value Added Energy Information Systems VAEIS Jump to: navigation, search Name Value Added Energy Information Systems (VAEIS) Place Arlington, New Hampshire Zip 2474 Sector Solar, Wind energy Product Provides turn-key monitoring systems for the performance of solar, wind, fuel cell and other distributed generation installations. Coordinates 43.337585°, -89.379449° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.337585,"lon":-89.379449,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

98

ARM - VAP Process - twrmr  

NLE Websites -- All DOE Office Websites (Extended Search)

Productstwrmr Productstwrmr Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Tower Water-Vapor Mixing Ratio (TWRMR) Instrument Categories Atmospheric Profiling The primary purpose of this algorithm is to calculate water-vapor mixing ratio at the 25- and 60-m levels of the tower at the Southern Great Plains (SGP) Central Facility. Since there are no barometric pressure sensors at those levels on the tower, the hypsometric equation is used along with pressure values from either the Surface Meteorological Observation System (SMOS) or the Temperature, Humidity, Wind, and Pressure System (THWAPS) to derive barometric pressures at those altitudes. After this is done, water

99

ARM - VAP Process - rlprof  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsrlprof Productsrlprof Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Raman LIDAR Vertical Profiles (RLPROF) Instrument Categories Aerosols, Atmospheric Profiling, Derived Quantities and Models Rlprof data flow diagram Rlprof data flow diagram Data flowchart for the RLPROF family. (Larger image available.) The Raman lidar automatically attempts to reoptimize the position of the laser beam in the detector's field-of-view every few hours (this is required for most narrow field-of-view lidar systems). However, this can introduce alignment artifacts in the narrow field-of-view data due to the way the detection channels are arranged on the optical bench. A suite of

100

ARM - VAP Process - mwrret  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsmwrret Productsmwrret Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : MWR Retrievals (MWRRET) Instrument Categories Cloud Properties, Atmospheric Profiling, Derived Quantities and Models Image - sample data plot Image - sample data plot There are 2-channel (23.8 and 31.4GHz) microwave radiometers (MWRs) deployed at each ARM Climate Research Facility site. The observed brightness temperatures from these MWRs can be inverted to retrieve precipitable water vapor (PWV) and cloud liquid water path (LWP), both of which are critical variables to understanding radiative transfer in the atmosphere and clouds. The ARM Facility routinely has provided retrieved

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Missouri Value-Added Loan Guarantee Program (Missouri) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Technology Centers Field Sites Power Marketing Administration Other Agencies You are here Home Savings Missouri Value-Added Loan Guarantee Program (Missouri) Missouri...

102

Value-Added Attributes of the QA Requirements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Value-Added Attributes of the QA Requirements Value-Added Attributes of the QA Requirements Value-Added Attributes of the QA Requirements Senior Management Ownership Senior management must take full ownership of the quality assurance program. These managers should establish policies and objectives focused on achieving the organization's mission while improving the quality of the organization's products and services. They must create an environment that promotes quality and the improvement of quality throughout the entire organization. Line Organization Responsibility People who perform the work have the greatest affect on item and process quality. They should be empowered. They determine the extent to which management's objectives are met. Individual employees should seek ways to improve the quality of their work by suggesting product and process

103

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

; Vlosky 2002 #12;s The first MDF plant started up four years ago and now there are 3 or 4, so furniture for exotic wood veneer layup. Pressing veneer on MDF will give the most defect-free, flat and smooth surface

104

Wood Products Marketing And Value-Added Opportunities  

E-Print Network (OSTI)

Opportunities -MDF- Market Opportunities -MDF- The first MDF plant started up four years ago and now there are 3 the substrate of choice for exotic wood veneer layup. Pressing veneer on MDF will give the most defect

105

76SF00098. Electricity Restructuring and Value-Added Services:  

E-Print Network (OSTI)

This paper presents the results of a series of interviews that were conducted with nonresidential electricity service customers who have chosen to take service from a retail electric service provider (RESP). The interviews explored customer attitudes towards and experiences with the process of purchasing electricity and, in some cases, value-added services in the competitive market. Key findings include: (1) our sample of large commercial/industrial customers believe that they are benefiting significantly more from commodity savings arising from direct access than from the value-added services that they are receiving; (2) there is high customer interest in billing, energy information, and energy efficiency services, as well as some (lesser) interest in “newer ” services, such as facility management and outsourcing (although customers remain uncertain of the value of these services); (3) there is no established preference among the majority of customers with respect to choice of suppliers (RESP, utility or other) for value-added services, although there are limited preferences for the RESP to provide billing, energy information and green power, and for a third party provider to deliver energy efficiency.

William Golove; Rodrigo Prudencio; Ryan Wiser; Charles Goldman; Beyond The Hype; William Golove

2000-01-01T23:59:59.000Z

106

ARM - VAP Process - goes-uth  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsgoes-uth Productsgoes-uth Documentation & Plots goes-uth : XDC documentation Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send VAP : Upper Tropospheric Relative Humidity from GOES Satellite Data (GOES-UTH) Instrument Categories Satellite Observations Output Products goes12uth : GOES-12: upper tropospheric humidity goes12uthgrid : GOES-12: upper tropospheric humidity (0.5 degree grid) goes8uth : GOES-8: upper tropospheric humidity goes8uthgrid : GOES-8: upper tropospheric humidity (0.5 degree grid) goes9uth : Upper Tropospheric Relative Humidity (GOES-9) goes9uthgrid : (GOES-9) Upper Tropospheric Relative Humidity Gridded Primary Measurements The following measurements are those considered scientifically relevant.

107

ARM - Evaluation Product - Interpolated Sonde  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsInterpolated Sonde ProductsInterpolated Sonde Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Interpolated Sonde Site(s) GAN SGP TWP General Description The interpolated-sonde value-added product is a modification of the mergesonde VAP that produces a daily file of thermodynamic variables from radiosonde soundings, the microwave radiometer, and surface meteorological instruments. This product does not incorporate ECMWF model output. Interpolated-sonde includes many of the same sophisticated scaling/interpolation/smoothing schemes that are the hallmark of the mergesonde VAP, but there are benefits to excluding ECMWF model output. These benefits include (1) a shorter time lag in producing a thermodynamic profile, and (2) the profiles are independent of the model so comparisons

108

EIA Energy Efficiency-Table 3d. Value Added by Selected Industries, 1998,  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 3d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Current Brillion Dollars) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 173 205 233 312 Beverage and Tobacco Product Manufacturing 62 67 79 313 Textile Mills 24 19 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 21 16 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 34 35 44 322 Paper Manufacturing 73 76 80 323 Printing and Related Support Activities 60 59 60 324 Petroleum and Coal Products Manufacturing 32 37 126 325 Chemical Manufacturing 230 254 340 326 Plastics and Rubber Products Manufacturing 86 92 99 327 Nonmetallic Mineral Product Manufacturing 53 55 72 331 Primary Metal Manufacturing 69 57 84 332 Fabricated Metal Product Manufacturing

109

EIA Energy Efficiency-Table 4d. Value Added by Selected Industries, 1998  

Gasoline and Diesel Fuel Update (EIA)

d d Page Last Modified: May 2010 Table 4d. Value Added1 by Selected Industries, 1998, 2002, and 2006 (Billion 2000 Dollars 2) MECS Survey Years NAICS Subsector and Industry 1998 2002 2006 311 Food Manufacturing 193 182 214 312 Beverage and Tobacco Product Manufacturing 70 59 73 313 Textile Mills 23 18 17 314 Textile Product Mills 13 13 15 315 Apparel Manufacturing 32 22 17 316 Leather and Allied Product Manufacturing 5 3 3 321 Wood Product Manufacturing 35 35 37 322 Paper Manufacturing 84 77 85 323 Printing and Related Support Activities 62 56 59 324 Petroleum and Coal Products Manufacturing 38 46 53 325 Chemical Manufacturing 225 248 291 326 Plastics and Rubber Products Manufacturing 84 88 99 327 Nonmetallic Mineral Product Manufacturing 55 54 66

110

Quality Assurance: Value-Added Attributes of the QA Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

qualified and performance-oriented. Quality Results A measure or the success of an organization is the quality of the services and products it provides. Product and service...

111

DOE/SC-ARM/TR-128 Tower Water-Vapor Mixing Ratio Value-Added  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 Tower Water-Vapor Mixing Ratio Value-Added Product April 2013 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the U.S. Government or any agency thereof. The views and

112

DOE/SC-ARM/TR-103 Cloud Condensation Nuclei Profile Value-Added  

NLE Websites -- All DOE Office Websites (Extended Search)

3 3 Cloud Condensation Nuclei Profile Value-Added Product S McFarlane C Sivaraman S Ghan October 2012 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or

113

ARM - Evaluation Product - Vertical Air Motion during Large-Scale  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsVertical Air Motion during Large-Scale ProductsVertical Air Motion during Large-Scale Stratiform Rain Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Vertical Air Motion during Large-Scale Stratiform Rain Site(s) NIM SGP General Description The Vertical Air Motion during Large-Scale Stratiform Rain (VERVELSR) value-added product (VAP) uses the unique properties of a 95-GHz radar Doppler velocity spectra to produce vertical profiles of air motion during low-to-moderate (1-20 mm/hr) rainfall events It is designed to run at ARM sites that include a W-band ARM cloud radar (WACR) radar with spectra data processing. The VERVELSR VAP, based on the work of Giangrande et al. (2010), operates by exploiting a resonance effect that occurs in

114

ARM - Evaluation Product - Quantitative Precipitation Estimates (QPE) from  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsQuantitative Precipitation Estimates (QPE) ProductsQuantitative Precipitation Estimates (QPE) from the CSAPR Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Quantitative Precipitation Estimates (QPE) from the CSAPR Site(s) SGP TWP General Description Precipitation rates from cloud systems can give a fundamental insight into the processes occurring in-cloud. While rain gauges and disdrometers can give information at a single point, remote sensors such as radars can provide rainfall information over a defined area. The QPE value-added product (VAP) takes the Corrected Moments in Antenna Coordinates VAP and maps the Rain_rate_A field onto a Cartesian grid at the surface. This field is the rain rate as determined using the specific attenuation (A, dBZ/km) due to two-way liquid attenuation after Ryzhkov et

115

Commercial Demonstration of Wood Recovery, Recycling, and Value Adding Technologies  

DOE Green Energy (OSTI)

This commercial demonstration project demonstrated the technical feasibility of converting low-value, underutilized and waste stream solid wood fiber material into higher valued products. With a growing need to increase product/production yield and reduce waste in most sawmills, few recovery operations and practically no data existed to support the viability of recovery operations. Prior to our efforts, most all in the forest products industry believed that recovery was difficult, extremely labor intensive, not cost effective, and that recovered products had low value and were difficult to sell. This project provided an opportunity for many within the industry to see through demonstration that converting waste stream material into higher valued products does in fact offer a solution. Our work, supported by the U.S. Department of Energy, throughout the project aimed to demonstrate a reasonable approach to reducing the millions of recoverable solid wood fiber tons that are annually treated as and converted into low value chips, mulch and fuel. Consequently sawmills continue to suffer from reduced availability of forest resources, higher raw material costs, growing waste disposal problems, increased global competition, and more pressure to operate in an Environmentally Friendly manner. It is our belief (based upon the experience of this project) that the successful mainstreaming of the recovery concept would assist in alleviating this burden as well as provide for a realistically achievable economic benefit to those who would seriously pursue the concept and tap into the rapidly growing ''GREEN'' building marketplace. Ultimately, with participation and aggressive pursuit of the recovery concept, the public would benefit in that: (1) Landfill/disposal waste volume could be reduced adding greater life to existing municipal landfill sites thereby minimizing the need to prematurely license and open added facilities. Also, there would be a cost avoidance benefit associated to what would have been the added municipal (community) management costs involved with maintaining closed landfills. (2) With greater quantities of recovered material being returned to and integrated into manufacturing and the marketplace, reduced demand upon virgin wood sources could help lead the way to promoting improved relations and environmental balance between producers and consumers further expanding the value of our natural resource without adding environmental burden.

Auburn Machinery, Inc.

2004-07-15T23:59:59.000Z

116

ARM - Evaluation Product - Active Remote Sensing of Clouds from Ka-band ARM  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsActive Remote Sensing of Clouds from Ka-band ProductsActive Remote Sensing of Clouds from Ka-band ARM Zenith Radars Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Active Remote Sensing of Clouds from Ka-band ARM Zenith Radars Site(s) GAN SGP General Description The Ka-band ARM Zenith Radars (KAZRs) have replaced the long-serving Millimeter Cloud Radars, or MMCRs. Accordingly, the primary MMCR Value Added Product (VAP), the Active Remote Sensing of CLouds (ARSCL) product, is being replaced by a KAZR-based version, the KAZR-ARSCL VAP. KAZR-ARSCL provides cloud boundaries and best-estimate time-height fields of radar moments. KAZR observations are corrected for water vapor attenuation and velocity aliasing and significant detection masks are produced. KAZR-ARSCL

117

The Development of QC Standards for ARM Data Products  

SciTech Connect

While the overall object of the Atmospheric Radiation Measurement (ARM) program, to study cloud formation processes and their influence on radiative transfer, has not changed since the program’s inception in 1992 [1], the challenges associated with and the methods applied to ensure ARM data is of “known and reasonable” quality have evolved as the program has matured. This paper describes an effort initiated in 2005 to create standards to guide the creation, formatting, and assessment of QC in ARM Value-Added Products (VAPs). It includes background on the motivation and process for creating the standards, a description of the requirements defined to guide the development of the standards, the standards themselves, and tools created to verify VAP data products properly adhere to the standards.

Gaustad, Krista L.; Flynn, Connor J.; Beus, Sherman J.; Ermold, Brian D.

2010-06-20T23:59:59.000Z

118

ARM - VAP Product - 30smplcmask1zwang  

NLE Websites -- All DOE Office Websites (Extended Search)

Airport, Gan Island, Maldives GRW M1 Browse Data Graciosa Island, Azores, Portugal HFE M1 Browse Data Shouxian, Anhui, China PVC M1 Browse Data Highland Center, Cape Cod MA; AMF 1...

119

ARM - VAP Product - qcrad1long  

NLE Websites -- All DOE Office Websites (Extended Search)

ARIES Observatory, Nainital, Uttarkhand, India PVC M1 Browse Data Highland Center, Cape Cod MA; AMF 1 PYE M1 Browse Data Point Reyes, CA SBS M1 Browse Data Steamboat Springs CO,...

120

ARM - Evaluation Product - Cloud Classification VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

properties includes cloud boundaries, thickness, phase, type, and precipitation information, and hence provides a useful tool for evaluation of model simulations and...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

USDA Webinar: Value-Added Producer Grants for Tribal Entities | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USDA Webinar: Value-Added Producer Grants for Tribal Entities USDA Webinar: Value-Added Producer Grants for Tribal Entities USDA Webinar: Value-Added Producer Grants for Tribal Entities January 14, 2014 11:00AM to 12:30PM MST Webinar Sponsored by the U.S. Department of Agriculture (USDA) Rural Development, this tribal-specific training will provide an overview of the FY14 Funding Opportunity and the Value-Added Producer Grants (VAPG) program and provide information about tribal entity eligibility and documentation requirements. Prospective tribal applicants, technical assistance providers, and interested USDA field staff will find the information helpful. Conference Call Information: Toll-free number: +1 800-981-3173 Toll number for DC area: +1 202-720-7039 Participant code: 4248 Join the LiveMeeting Webinar here. For more information, contact Tedd Buelow at 720-544-2911.

122

Microbial chemical factories: recent advances in pathway engineering for synthesis of value added chemicals  

E-Print Network (OSTI)

The dwindling nature of petroleum and other fossil reserves has provided impetus towards microbial synthesis of fuels and value added chemicals from biomass-derived sugars as a renewable resource. Microbes have naturally ...

Dhamankar, Himanshu Hemant

123

"NAICS",,"per Employee","of Value Added","of Shipments" "Code...  

U.S. Energy Information Administration (EIA) Indexed Site

Errors for Table 6.3;" " Unit: Percents." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of...

124

"NAICS",,"per Employee","of Value Added","of Shipments" "Code...  

U.S. Energy Information Administration (EIA) Indexed Site

Errors for Table 6.4;" " Unit: Percents." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of...

125

USDA Webinar: Value-Added Producer Grants for Tribal Entities | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

USDA Webinar: Value-Added Producer Grants for Tribal Entities USDA Webinar: Value-Added Producer Grants for Tribal Entities USDA Webinar: Value-Added Producer Grants for Tribal Entities January 14, 2014 1:00PM EST FY2014 Training Schedule Tuesday, January 14 9:00 - 10:30 AM Alaska Standard Time 10:00 - 11:30 AM Pacific Standard Time 11:00 AM-12:30 PM Mountain Standard Time 12:00 PM - 1:30 PM Central Standard Time 1:00 PM-2:30 PM Eastern Standard Time Topics: FY 14 Funding Opportunity, overview of VAPG program, tribal entity eligibility and documentation requirements. Who should attend: Prospective Tribal applicants, technical assistance providers, interested USDA field staff. Conference Call Information: Toll-free number: +1 800-981-3173 Toll number for DC area: +1 202-720-7039 Participant code: 4248 Join the LiveMeeting Webinar here:

126

Best Estimate Radiation Flux Value-Added Procedure: Algorithm Operational Details and Explanations  

NLE Websites -- All DOE Office Websites (Extended Search)

8 8 Best Estimate Radiation Flux Value-Added Procedure: Algorithm Operational Details and Explanations October 2002 Y. Shi and C. N. Long DOE, ARM, Pacific Northwest National Laboratory Richland, Washington Work supported by the U.S. Department of Energy, Office of Energy Research, Office of Health and Environmental Research Contents 1. Introduction ............................................................................................................................................ 1 2. Input Data ............................................................................................................................................... 1 3. Configuration Files.................................................................................................................................

127

Status of the Broadband Heating Rate Profile (BBHRP) VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Status of the Broadband Heating Rate Profile (BBHRP) VAP Status of the Broadband Heating Rate Profile (BBHRP) VAP Mlawer, Eli Atmospheric & Environmental Research, Inc. Clough, Shepard Atmospheric and Environmental Research Delamere, Jennifer Atmospheric and Environmental Research, Inc. Miller, Mark Brookhaven National Laboratory Johnson, Karen Brookhaven National Laboratory Troyan, David Brookhaven National Laboratory Jensen, Michael Brookhaven National Laboratory Shippert, Timothy Pacific Northwest National Laboratory Long, Chuck Pacific Northwest National Laboratory Flynn, Connor Pacific Northwest National Laboratory Sivaraman, Chitra Pacific Northwest National Laboratory Turner, David University of Wisconsin-Madison Heck, Patrick University of Wisconsin Rutan, David Analytical Services & Materials, Inc.

128

DOE/SC-ARM-TR-102 Sonde Adjust Value-Added Product Technical...  

NLE Websites -- All DOE Office Websites (Extended Search)

... 14 Figures 1 The original and corrected relative humidity profile for Vaisala RS-92 radiosondes launched at the SGP Central Facility on May 12,...

129

Heat Treatment of Black Dross for the Production of a Value Added ...  

Science Conference Proceedings (OSTI)

The chemical composition of the BD after heat treatment was investigated by ... of the Chemical Changes and Surface Properties of Carbonated Waste Cement ... Flux for Basic Oxygen Steel Making Using Waste Oxides of Steel Plant ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

130

Dynamics and Trends in U.S. Value-Added Wood Product Markets  

E-Print Network (OSTI)

Rouge, Louisiana, USA #12;Presentation Outline Demographics/Demand DriversDemographics/Demand Drivers, Flooring The BalkansThe Balkans RecommendationsRecommendations #12;Demographics/ Demand Drivers #12

131

Identifying Employment Structure and Training Needs In the Louisiana Value-Added Wood Products Industry  

E-Print Network (OSTI)

for a layup on Saturday at EnergySolutions Arena in Salt Lake City. "Our coaches had a great gameplan for us or not the microbes might be harmful to humans. The purpose of the assign- ment, according to plant and wildlife hiding be- hind a brand and start reping a brand that reflects you. The time has come to plant your print

132

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

of existing data products into "value-added" products (VAPs). Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are...

133

DISCLAIMER  

NLE Websites -- All DOE Office Websites (Extended Search)

of existing data products into value-added products (VAPs). Despite extensive instrumentation deployed at the ARM sites, there will always be quantities of interest that are...

134

The application of the value-added activity model for the Mark-6 LE integration project  

E-Print Network (OSTI)

Powerful information and workflow management tools can minimize risks and maximize productivity for a project. However, a conventional task-based project management approach does not provide the kind of details necessary ...

Liang, Joanna (Joanna Jung-Yen)

2005-01-01T23:59:59.000Z

135

Membrane-Based Energy Efficient Dewatering of Microalgae in Biofuels Production and Recovery of Value Added Co-Products  

Science Conference Proceedings (OSTI)

The objective of this paper is to describe the use of membranes for energy efficient biomass harvesting and dewatering. We have evaluated the dewatering of Nannochloropsis sp. with polymeric hollow fiber and tubular inorganic membranes to demonstrate the capabilities of a membrane-based system to achieve microalgal biomass of >150 g/L (dry wt.) and ~99% volume reduction through dewatering. The particle free filtrate containing the growth media is suitable for recycle and reuse. For cost-effective processing, hollow fiber membranes can be utilized to recover 90-95% media for recycle. Tubular membranes can provide additional media and water recovery to achieve target final concentrations. Based on the operating conditions used in this study and taking into scale-up considerations, it can be shown that an integrated hollow fiber-tubular membrane system can process microalgal biomass with at least 80% lower energy requirement compared to traditional processes. Backpulsing was found to be an effective flux maintenance strategy to minimize flux decline at high biomass concentration. An effective chemical cleaning protocol was developed for regeneration of fouled membranes.

Bhave, Ramesh R [ORNL; Kuritz, Tanya [ORNL; Powell, Lawrence E [ORNL; Adcock, Kenneth Dale [ORNL

2012-01-01T23:59:59.000Z

136

"NAICS",,"per Employee","of Value Added","of Shipments"  

U.S. Energy Information Administration (EIA) Indexed Site

1 Relative Standard Errors for Table 6.1;" 1 Relative Standard Errors for Table 6.1;" " Unit: Percents." ,,,,"Consumption" ,,,"Consumption","per Dollar" ,,"Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Subsector and Industry","(million Btu)","(thousand Btu)","(thousand Btu)" ,,"Total United States" 311,"Food",3.8,4.3,4.1 3112," Grain and Oilseed Milling",8.2,5.8,5.6 311221," Wet Corn Milling",0,0,0 31131," Sugar Manufacturing",0,0,0 3114," Fruit and Vegetable Preserving and Specialty Foods ",7.3,6.7,6.2

137

ESS 2012 Peer Review - Impact Study of Value-Added Functionality on Inverters in ESS - Eric Green & Vivek Ramachandran, NC State  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Results (Model Validation) Results (Model Validation) Figure 6: Real and Reactive Power Reference vs. Output Figure 7: IGBT and Diode Loss from Manufacturer (Fuji) Figure 8: IGBT and Diode Loss from Simulation Impact Study of Value-Added Functionality on Inverters in Energy Storage Systems Motivation Power conversion systems (PCS) developers are incorporating value-added functions; little is known about the on overall PCS reliability. Objective Develop electrical models to gain an understanding of the degradation of a PCS and its internal components due to value- added functionality; primarily VAR generation. Investigation and modeling of frequency support applications may be considered as a secondary objective.

138

Estimating the potential returns to research and development from sorghum value added products in El Salvador and Nicaragua.  

E-Print Network (OSTI)

??Sorghum bicolor (L.) Moench is a drought tolerant crop able to adapt to hot and dry weather. It has excellent chemical and physical properties, which… (more)

Jaen Celada, Jaeljattin R.

2011-01-01T23:59:59.000Z

139

Top Value-Added Chemicals from Biomass - Volume II—Results of Screening for Potential Candidates from Biorefinery Lignin  

SciTech Connect

This report evaluates lignin’s role as a renewable raw material resource. Opportunities that arise from utilizing lignin fit into one of three categories: 1)power, fuel and syngas (generally near-term opportunities) 2) macromolecules (generally medium-term opportunities) 3) aromatics and miscellaneous monomers (long-term opportunities). Biorefineries will receive and process massive amounts of lignin. For this reason, how lignin can be best used to support the economic health of the biorefinery must be defined. An approach that only considers process heat would be shortsighted. Higher value products present economic opportunities and the potential to significantly increase the amount of liquid transportation fuel available from biomass. In this analysis a list of potential uses of lignin was compiled and sorted into “product types” which are broad classifications (listed above as power—fuel—syngas; macromolecules; and aromatics). In the first “product type” (power—fuel—gasification) lignin is used purely as a carbon source and aggressive means are employed to break down its polymeric structure. In the second “product type” (macromolecules) the opposite extreme is considered and advantage of the macromolecular structure imparted by nature is retained in high-molecular weight applications. The third “product type” (aromatics) lies somewhere between the two extremes and employs technologies that would break up lignin’s macromolecular structure but maintain the aromatic nature of the building block molecules. The individual opportunities were evaluated based on their technical difficulty, market, market risk, building block utility, and whether a pure material or a mixture would be produced. Unlike the “Sugars Top 10” report it was difficult to identify the ten best opportunities, however, the potential opportunities fell nicely into near-, medium- and long-term opportunities. Furthermore, the near-, medium- and long-term opportunities roughly align with the three “product types.” From this analysis a list of technical barriers was developed which can be used to identify research needs. Lignin presents many challenges for use in the biorefinery. Chemically it differs from sugars having a complex aromatic substructure. Unlike cellulose, which has a relatively simple substructure of glucose subunits, lignin has a high degree of variability in its structure which differs both from biomass source and from the recovery process used. In addition to its variability lignin is also reactive and to some degree less stable thermally and oxidatively to other biomass streams. What this means is that integrating a lignin process stream within the biorefinery will require identifying the best method to separate lignin from biomass cost-effectively.

Holladay, John E.; White, James F.; Bozell, Joseph J.; Johnson, David

2007-10-01T23:59:59.000Z

140

Top Value Added Chemicals From Biomass: I. Results of Screening for Potential Candidates from Sugars and Synthesis Gas  

DOE Green Energy (OSTI)

This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. The twelve building blocks can be subsequently converted to a number of high-value bio-based chemicals or materials. Building block chemicals, as considered for this analysis, are molecules with multiple functional groups that possess the potential to be transformed into new families of useful molecules. The twelve sugar-based building blocks are 1,4-diacids (succinic, fumaric and malic), 2,5-furan dicarboxylic acid, 3-hydroxy propionic acid, aspartic acid, glucaric acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxybutyrolactone, glycerol, sorbitol, and xylitol/arabinitol. In addition to building blocks, the report outlines the central technical barriers that are preventing the widespread use of biomass for products and chemicals.

Werpy, Todd A.; Holladay, John E.; White, James F.

2004-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

STATEMENT OF CONSIDERATIONS REQUEST BY AIR PRODUCTS AND CHEMICALS...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Fuels Development Unit (AFDU), new technologies for the synthesis of value-added syngas-derived products from non-traditional feedstocks. The project is to demonstrate the...

142

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

New Surface Spectral Albedo VAP Provides Surface Type Observations at New Surface Spectral Albedo VAP Provides Surface Type Observations at Southern Great Plains Bookmark and Share Example quicklook from the SURFSPECALB VAP. The plot shows the estimated spectral albedo at SGP for the 10-m and 25-m towers on September 11, 2004. On this day, the surface type for both towers is partial vegetation. Example quicklook from the SURFSPECALB VAP. The plot shows the estimated spectral albedo at SGP for the 10-m and 25-m towers on September 11, 2004. On this day, the surface type for both towers is partial vegetation. The Surface Spectral Albedo (SURFSPECALB) value-added product (VAP) has been released for operational production at the Southern Great Plains (SGP) site. This VAP creates a near-continuous best estimate of broadband and

143

"Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Relative Standard Errors for Table 6.2;" 2 Relative Standard Errors for Table 6.2;" " Unit: Percents." ,,,"Consumption" " ",,"Consumption","per Dollar" " ","Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)" ,"Total United States" "Value of Shipments and Receipts" "(million dollars)" " Under 20",3,3,3 " 20-49",5,5,4 " 50-99",6,5,4 " 100-249",5,5,4 " 250-499",7,9,7 " 500 and Over",3,2,2 "Total",2,2,2

144

"Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

2 Relative Standard Errors for Table 6.2;" 2 Relative Standard Errors for Table 6.2;" " Unit: Percents." ,,,"Consumption" ,,"Consumption","per Dollar" ,"Consumption","per Dollar","of Value" "Economic","per Employee","of Value Added","of Shipments" "Characteristic(a)","(million Btu)","(thousand Btu)","(thousand Btu)" ,"Total United States" "Value of Shipments and Receipts" "(million dollars)" " Under 20",2.5,2.5,2.4 " 20-49",5,5,4.3 " 50-99",5.8,5.8,5.3 " 100-249",6.2,6.2,5.3 " 250-499",8.2,8,7.1 " 500 and Over",4.3,3,2.7

145

Lean Product Development: Making Waste Transparent  

E-Print Network (OSTI)

Lean manufacturing developed by Toyota is a production philosophy that focuses on streamlining of value added activities and eliminating waste within the process with the goal to better meet customer demand. It constitutes ...

Bauch, Christoph

2004-01-15T23:59:59.000Z

146

ARM - VAP Process - mergesonde  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsmergesonde Documentation & Plots Technical Report Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you Send...

147

ARM - VAP Process - qmemwrcol  

NLE Websites -- All DOE Office Websites (Extended Search)

Productsqmemwrcol Documentation & Plots Data Management Facility Plots (Quick Looks) ARM Data Discovery Browse Data Comments? We would love to hear from you Send us a note below...

148

ARM - VAP Process - aerinf  

NLE Websites -- All DOE Office Websites (Extended Search)

Data ARIES Observatory, Nainital, Uttarkhand, India PVC M1 Browse Data Highland Center, Cape Cod MA; AMF 1 Contact(s) Timothy Shippert Developer (509) 375-5997 timothy.shippert...

149

ARM - VAP Process - mplcmask  

NLE Websites -- All DOE Office Websites (Extended Search)

HFE M1 Browse Data Shouxian, Anhui, China PVC M1 Browse Data Highland Center, Cape Cod MA; AMF 1 Contact(s) Chitra Sivaraman Developer (509) 375-2436 chitra.sivaraman@pnnl.go...

150

ARM - VAP Process - wpdngps  

NLE Websites -- All DOE Office Websites (Extended Search)

formed in response to the need for improved moisture observations to support weather forecasting, climate monitoring, and research. The primary goals of the branch are to...

151

1  

NLE Websites -- All DOE Office Websites (Extended Search)

Variability Across the ARM SGP Area Variability Across the ARM SGP Area by Temporal and Spatial Scale C. N. Long and T. P. Ackerman Pacific Northwest National Laboratory J. E. Christy Columbia University New York, New York Introduction The Surface Cloud Grid (SfcCldGrid) value-added product (VAP) uses the output of the Shortwave Flux Analysis VAP (Long and Ackerman 2000, Long et al. 1999, Long 2001) at 15-minute resolution for each of the 21 surface radiometer sites of the Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) network area as input. The SfcCldGrid VAP uses the Analytic Approximation interpolation technique of Caracena (1987) to produce a 0.25° × 0.25° grid across the ARM SGP area at 15-minute resolution. (More information about the SfcCldGrid VAP, and an analysis of the interpola-

152

ARM - Publications: Science Team Meeting Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

The MERGED_SOUNDING VAP: A Status Report and Description The MERGED_SOUNDING VAP: A Status Report and Description Miller, M.A.(a), Troyan, D.T.(a), and Mace, G.G.(b), Brookhaven National Laboratory (a), University of Utah (b) The Value-added Product (VAP) known as MERGED_SOUNDING has been deemed a very desirous component of ARMs suite of VAPs. To have a thermodynamics profile of the atmosphere at one-minute temporal intervals and uniform height levels available for ARM data users eliminates much redundancy and inconsistency as investigators will now have standard atmospheric profiles at their disposal. The values which constitute the thermodynamics profile include: Temperature, Relative Humidity, Vapor Pressure, Barometric Pressure, Wind Speed and Direction, and Dewpoint. The data integrated to form the MERGED_SOUNDING data stream comes from radiosonde launches, model

153

ARM - Evaluation Product - Radiatively Important Parameters Best Estimate  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsRadiatively Important Parameters Best ProductsRadiatively Important Parameters Best Estimate (RIPBE) Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Radiatively Important Parameters Best Estimate (RIPBE) 2002.03.01 - 2007.06.30 Site(s) SGP General Description The Radiatively Important Parameters Best Estimate (RIPBE) VAP combines multiple input datastreams, each with their own temporal and vertical resolution, to create a complete set of radiatively important parameters on a uniform vertical and temporal grid with quality control and source information for use as input to a radiative transfer model. One of the main drivers for RIPBE was to create input files for the BroadBand Heating Rate Profiles (BBHRP) VAP, but we also envision use of RIPBE files for user-run

154

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

New Evaluation Product Provides Thermodynamic Variables from Multiple New Evaluation Product Provides Thermodynamic Variables from Multiple Instruments Bookmark and Share INTERPSONDE output from the SGP Central Facility during the Midlatitude Continental Convective Clouds Experiment from April 26, 2011. INTERPSONDE output from the SGP Central Facility during the Midlatitude Continental Convective Clouds Experiment from April 26, 2011. The Interpolated Sonde (INTERPSONDE) value-added product (VAP) is an intermediate step of the MERGESONDE VAP that produces a daily file of atmospheric state variables (temperature, humidity, pressure, and winds) from radiosonde soundings, the microwave radiometer, and surface meteorological instruments. INTERPSONDE includes many of the same sophisticated scaling/interpolation/smoothing schemes that are the hallmark

155

"NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

3 Relative Standard Errors for Table 6.3;" 3 Relative Standard Errors for Table 6.3;" " Unit: Percents." " "," ",,,"Consumption" " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)" ,,"Total United States" " 311 - 339","ALL MANUFACTURING INDUSTRIES" ,"Value of Shipments and Receipts" ,"(million dollars)" ," Under 20",3,3,3

156

ARM - Principal Investigator Data Products  

NLE Websites -- All DOE Office Websites (Extended Search)

govDataPI Data Products govDataPI Data Products Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send PI Data Products These data sets have been made available by ARM principal investigators (PI) or by others for use by the scientific community through the ARM Data Archive. These data are value-added products to particular ARM data sets or are derived research data of value to ARM science. To submit your own value-added data set, go to Data Product Registration and Submission. Using your Archive account, these data are freely available. First time users of the Archive will need to create a new account by completing a relatively short form asking for contact information-accounts are activated right away. Product Name Investigator Sites Start End

157

"NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)"  

U.S. Energy Information Administration (EIA) Indexed Site

4 Relative Standard Errors for Table 6.4;" 4 Relative Standard Errors for Table 6.4;" " Unit: Percents." " "," ",,,"Consumption" " "," ",,"Consumption","per Dollar" " "," ","Consumption","per Dollar","of Value" "NAICS",,"per Employee","of Value Added","of Shipments" "Code(a)","Economic Characteristic(b)","(million Btu)","(thousand Btu)","(thousand Btu)" ,,"Total United States" " 311 - 339","ALL MANUFACTURING INDUSTRIES" ,"Employment Size" ," Under 50",3,4,4 ," 50-99",5,5,5 ," 100-249",4,4,3

158

Alternative Stabilization Methods and Value-Added Derivatives ...  

fusion in carbonized fibers. The proposed route involves least expensive chemicals. A proof-of-concept has been demonstrated (in the laboratory) ...

159

Understanding transit travel behavior : value added by smart cards  

E-Print Network (OSTI)

Travel behavior represents a particularly complex area of research in transportation given the interaction between transport supply characteristics and the user perceptions which guide his/her decisions. Thanks to the ...

Gupta, Saumya, S.M. Massachusetts Institute of Technology

2006-01-01T23:59:59.000Z

160

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

January 31, 2012 [Data Announcements] January 31, 2012 [Data Announcements] It's Official Now-Cloud Microphysical Properties Value-Added Product Changes Status Bookmark and Share The Continuous Baseline Microphysical Retrieval (MICROBASE) value-added product (VAP) has been released as an official ARM VAP. Data from April 1998 through December 2009 are now available for the Southern Great Plains, North Slope of Alaska, and Tropical Western Pacific sites. Historical updates will be provided whenever additional data become available. This sample quicklook plot shows averaged liquid water content for May 9, 2006, at the SGP site. This sample quicklook plot shows averaged liquid water content for May 9, 2006, at the SGP site. MICROBASE is a baseline retrieval of cloud microphysical properties. It

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

ARM - Publications: Science Team Meeting Documents  

NLE Websites -- All DOE Office Websites (Extended Search)

Three-Dimensional Radiative Transfer Computations to Complement the ARM Three-Dimensional Radiative Transfer Computations to Complement the ARM Broadband Heating Rate Profile (BBHRP) Value Added Product (VAP) OHirok, W.(a), Gautier, C.(a), and Miller, M.A.(b), University of California, Santa Barbara (a), Brookhaven National Laboratory (b) Thirteenth Atmospheric Radiation Measurement (ARM) Science Team Meeting A core programmatic goal of ARM is to understand how cloud variability is associated with radiative flux variability. A major effort among the ARM working groups is now underway to produce the Broadband Heating Rate Profile (BBHRP) Value Added Product (VAP). The heating rate profiles are derived from Rapid Radiative Transfer Models (RRTMs) that use best estimates of cloud characteristics, gaseous profiles, aerosols and surface

162

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Vertical Air Motion Profiles Available Through New Value-Added Product Vertical Air Motion Profiles Available Through New Value-Added Product Bookmark and Share In the top figure, evidence of stratiform precipitation is observed in the WACR reflectivity profiles. Vertical air motion is retrieved from the WACR velocity spectra for hours 900 to 1200 as depicted on the lower left. An overview of the VAP algorithm is displayed on the lower right. Click to enlarge. In the top figure, evidence of stratiform precipitation is observed in the WACR reflectivity profiles. Vertical air motion is retrieved from the WACR velocity spectra for hours 900 to 1200 as depicted on the lower left. An overview of the VAP algorithm is displayed on the lower right. Click to enlarge. The Vertical Air Motion during Large-Scale Stratiform Rain (VERVELSR)

163

High Activity catalysts for Polyols Production From C-6 Sugars  

DOE Green Energy (OSTI)

Over the course of this project, many significant discoveries have been made in the process for the conversion of sorbitol to value added products. The object was developing a process for the production of propylene glycol (PG), ethylene glycol (EG), and glycerol from sorbitol.

Todd Werpy; Alan Zacher; John Frye; Keith Peterson; Gary Neuenschwander; Eric Alderson; Daniel Muzatko; Jim White

2003-05-06T23:59:59.000Z

164

Techniques and Methods Used to Determine the Best Estimate of Radiation Fluxes at SGP Central Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Techniques and Methods Used to Determine the Techniques and Methods Used to Determine the Best Estimate of Radiation Fluxes at SGP Central Facility Y. Shi and C. N. Long Pacific Northwest National Laboratory Richland, Washington Algorithm and Methodology The Best Estimate Flux value-added product (VAP) processes data started on March 22, 1997, when data from the three central facility (CF) radiometer systems, Solar Infrared Station (SIRS) E13, C1, and baseline surface radiation network (BSRN) (sgpsirs1duttE13.c1, sgpsirs1duttC1.c1, and sgpbsrn1duttC1.c1), were all available. In 2001, the diffuse shortwave (SW) instruments were switched to shaded black and white instruments, and the name BSRN was switched to broadband radiometer station (BRS). Before that time, this VAP uses corrected diffuse SW from the DiffCorr1Dutt VAP as

165

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

November 1, 2012 [Data Announcements] November 1, 2012 [Data Announcements] New Flagship Data Product Launched Bookmark and Share Climate Modeling Best Estimate Transitioned to ARM Best Estimate Data plot from ARM Best Estimate Cloud Radiation VAP demonstrating cloud fraction at Darwin for 2010. Data plot from ARM Best Estimate Cloud Radiation VAP demonstrating cloud fraction at Darwin for 2010. The ARM showcase data set CMBE, previously released as an evaluation product, transitioned to an ARM production data set and became the first two products of the new ARMBE value-added product. The new flagship ARMBE product name will represent all the ARM best estimate products. Transitioning CMBE to ARMBE required changing the metadata to meet ARM production data standards, but also brings the new release of ARM Best

166

ARM - Evaluation Product - Sonde-Adjust  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsSonde-Adjust ProductsSonde-Adjust Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Sonde-Adjust Site(s) FKB GRW HFE NIM NSA PYE SGP TWP General Description The sonde-adjust VAP produces data that corrects documented biases in radiosonde humidity measurements. Unique fields contained within this datastream include smoothed original relative humidity, dry bias corrected relative humidity, and final corrected relative humidity. The smoothed RH field refines the relative humidity from integers - the resolution of the instrument - to fractions of a percent. This profile is then used to calculate the dry bias corrected field. The final correction fixes a time-lag problem and uses the dry-bias field as input into the algorithm.

167

Data mining to improve industrial standards and enhance production and marketing: An empirical study in apparel industry  

Science Conference Proceedings (OSTI)

Apparel production is a high value-added industry in the global textile manufacturing chain. Standard size charts are crucial industrial standards for high-tech apparel industries to maintain competitive advantages in knowledge economy era. However, ... Keywords: Apparel industry, Cluster analysis, Data mining, Industrial standards, Production management and marketing

Chih-Hung Hsu

2009-04-01T23:59:59.000Z

168

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Unique Manus Island Precipitation Data Available Unique Manus Island Precipitation Data Available Bookmark and Share Statistical coverage product from the Manus C-SAPR showing times of data availability. Click to enlarge. Statistical coverage product from the Manus C-SAPR showing times of data availability. Click to enlarge. Evaluation data are available for the value-added product (VAP) Mapped Moments to a Cartesian Grid (MMCG) for periods between October and December 2011 from the Tropical Western Pacific Manus site. The C-band scanning ARM precipitation radar (C-SAPR) produces measurements of raw radar moments in antenna coordinates of range from and the azimuth and elevation of the antenna. This VAP maps raw moment data from the C-SAPR on to a model-like, regular Cartesian grid. The Manus C-SAPR signal processor had issues that corrupted polarimetric

169

ARM - Evaluation Product - Broadband Heating Rate Profile Project (BBHRP)  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsBroadband Heating Rate Profile Project ProductsBroadband Heating Rate Profile Project (BBHRP) Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Broadband Heating Rate Profile Project (BBHRP) 2000.03.01 - 2006.02.28 Site(s) SGP General Description The objective of the ARM Broadband Heating Rate Profile (BBHRP) Project is to provide a structure for the comprehensive assessment of our ability to model atmospheric radiative transfer for all conditions. Required inputs to BBHRP include surface albedo and profiles of atmospheric state (temperature, humidity), gas concentrations, aerosol properties, and cloud properties. In the past year, the Radiatively Important Parameters Best Estimate (RIPBE) VAP was developed to combine all of the input properties

170

A Comparison of Cirrus Cloud Visible Optical Depth Derived from Lidar  

NLE Websites -- All DOE Office Websites (Extended Search)

Comparison of Cirrus Cloud Visible Optical Depth Derived from Lidar Comparison of Cirrus Cloud Visible Optical Depth Derived from Lidar Lo, Chaomei Pacific Northwest National Laboratory Comstock, Jennifer Pacific Northwest National Laboratory Flynn, Connor Pacific Northwest National Laboratory Category: Cloud Properties Optically thin clouds (e.g. optical depth < 3) can have a significant impact on radiative heating in the atmosphere, particularly in the cold upper troposphere. Currently, there is no value-added product (VAP) in the Atmospheric Radiation Measurement (ARM) program archive that produces thin cloud optical depth, particularly at the Tropical Western Pacific and North Slope of Alaska sites. A VAP is under development to obtain the cirrus cloud visible optical depth from the MPLNOR (Micro Pulse Lidar Normalized

171

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

September 12, 2013 [Data Announcements] September 12, 2013 [Data Announcements] Value-Added Product Estimates Planetary Boundary Layer Height from Radiosondes Bookmark and Share Example quicklook plot from the VAP showing the sub-sampled potential temperature (black) and potential temperature lapse rate (red) from a single radiosonde along with the estimates of PBL height from the three methods. Example quicklook plot from the VAP showing the sub-sampled potential temperature (black) and potential temperature lapse rate (red) from a single radiosonde along with the estimates of PBL height from the three methods. The planetary boundary layer (PBL) height (or mixing layer depth) can vary significantly with time due to a number of factors including large-scale dynamics, cloudiness, convective mixing, and the diurnal cycle of solar

172

Slide 1  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiative Processes Working Group: Radiative Processes Working Group: Value Added Product (VAP) Updates Sally McFarlane RPWG Translator RPWG Breakout March 23,2009 2 Status of RPWG Operational VAPs BE Flux (Best Estimate Flux from 3 radiometers at SGP) run daily up through current QC RAD (Data Quality Assessment for Radiation Data) c1, s1 level data -current at all sites c2 level data - processing global shortwave correction; waiting for information on instrument swap-outs c1, s1 level data in archive for AMF from Pt. Reyes and COPS Investigating tracker problem in Niamey data Will begin processing China data shortly Shortwave Flux Analysis Runs monthly on all fixed sites except Darwin (processed once/year) and NSA (not implemented); 1-2 months behind current Adding NSA data; code implemented, currently evaluating test cases

173

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

August 25, 2009 [Data Announcements] August 25, 2009 [Data Announcements] Shortwave Flux Analysis Extended to North Slope of Alaska Bookmark and Share This summer, the ARM Radiative Processes Working Group released an extension of the Shortwave Flux Analysis value-added product to include data from the ARM North Slope of Alaska locale. Originally released in 2004, the Shortwave Flux Analysis VAP was developed to infer clear-sky shortwave, shortwave cloud effects, and fractional sky cover from shortwave measurements at the ARM Southern Great Plains and Tropical Western Pacific sites. This VAP has been used to study the effects of clouds on the surface radiation budget and now, with the addition of data collected at the North Slope since 1999, can also benefit Arctic climate research efforts. The

174

Production  

E-Print Network (OSTI)

There are serious concerns about the greenhouse gas (GHG) emissions, energy and nutrient and water use efficiency of large-scale, first generation bio-energy feedstocks currently in use. A major question is whether biofuels obtained from these feedstocks are effective in combating climate change and what impact they will have on soil and water resources. Another fundamental issue relates to the magnitude and nature of their impact on food prices and ultimately on the livelihoods of the poor. A possible solution to overcome the current potentially large negative effects of large-scale biofuel production is developing second and third generation conversion techniques from agricultural residues and wastes and step up the scientific research efforts to achieve sustainable biofuel production practices. Until such sustainable techniques are available governments should scale back their support for and promotion of biofuels. Multipurpose feedstocks should be investigated making use of the bio-refinery concept (bio-based economy). At the same time, the further development of non-commercial, small scale

Science Council Secretariat

2008-01-01T23:59:59.000Z

175

The Broadband Heating Rate Profile (BBHRP) VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Ellingson Florida State University Tallahassee, Florida M. H. Zhang State University of New York at Albany Albany, New York Stony Brook R. A. Ferrare National Aeronautics and...

176

Energy Balance Bowen Ratio Station (EBBR) Handbook  

Science Conference Proceedings (OSTI)

The energy balance Bowen ratio (EBBR) system produces 30-minute estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity (RH). Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data. A unique aspect of the system is the automatic exchange mechanism (AEM), which helps to reduce errors from instrument offset drift.

Cook, DR

2011-02-23T23:59:59.000Z

177

ARM Energy Balance Bowen Ratio (EBBR) station: surf. heat flux and related data, 30-min  

DOE Data Explorer (OSTI)

The Energy Balance Bowen Ratio (EBBR) system produces 30-min estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity. Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data. A unique aspect of the system is the automatic exchange mechanism (AEM), which helps to reduce errors from instrument offset drift.

Cook, David

178

ARM Energy Balance Bowen Ratio (EBBR) station: surf. heat flux and related data, 30-min  

SciTech Connect

The Energy Balance Bowen Ratio (EBBR) system produces 30-min estimates of the vertical fluxes of sensible and latent heat at the local surface. Flux estimates are calculated from observations of net radiation, soil surface heat flux, and the vertical gradients of temperature and relative humidity. Meteorological data collected by the EBBR are used to calculate bulk aerodynamic fluxes, which are used in the Bulk Aerodynamic Technique (BA) EBBR value-added product (VAP) to replace sunrise and sunset spikes in the flux data. A unique aspect of the system is the automatic exchange mechanism (AEM), which helps to reduce errors from instrument offset drift.

Cook, David

1993-07-04T23:59:59.000Z

179

ARM - Evaluation Product - MicroPulse LIDAR Cloud Optical Depth (MPLCOD)  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsMicroPulse LIDAR Cloud Optical Depth ProductsMicroPulse LIDAR Cloud Optical Depth (MPLCOD) Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : MicroPulse LIDAR Cloud Optical Depth (MPLCOD) 1999.05.01 - 2004.05.14 Site(s) SGP General Description The MPLCOD VAP retrieves the column cloud visible optical depth using LIDAR derived backscatter from the MPLNOR (Micro Pulse Lidar Normalized Backscatter) and radiosonde thermodynamic profiles. The optical depth retrieval is derived following Comstock et al. (2001), which retrieves visible optical depth and layer average backscatter-to-extinction ratio (k) at the lidar wavelength for each backscatter profile. Data Information Data Directory Contacts Principal Investigator Jennifer Comstock (509) 372-424

180

PROCESS DEVELOPMENT STUDIES ON THE BIOCONVERSION OF CELLULOSE AND PRODUCTION OF ETHANOL  

E-Print Network (OSTI)

RECOVERY Dist. Column Condenser Fl Preheat Exchanger F2189,000 Condenser •••••••• 2707 , CS ••••..••••••••••••••SEP. (301 (10 gal) 2nd VAP, condenser CENTRIFUGE YEAST DRYER

Wilke, Charles R.

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

PROCESS DEVELOPMENT STUDIES ON THE BIOCONVERSION OF CELLULOSE AND PRODUCTION OF ETHANOL  

E-Print Network (OSTI)

Tank Gas Liquid Separators 2nd Vapor Condensor CentrifugeGAS LIQUID SEP. (301 (10 gal) 2nd VAP, condenser CENTRIFUGE

Wilke, Charles R.

2011-01-01T23:59:59.000Z

182

Western cattle prices vary across video markets and value-adding programs  

E-Print Network (OSTI)

results show average price differences between the regionthe highest average prices. † These values are statisticallyfactors affecting cow auction price differentials. Southern

Blank, Steven C.; Boriss, Hayley; Forero, Larry C.; Nader, Glenn A.

2006-01-01T23:59:59.000Z

183

The Integrated Biorefinery: Conversion of Corn Fiber to Value-added Chemicals  

DOE Green Energy (OSTI)

This presentation provides a summary of Michigan Biotechnology Institute's efforts to employ the corn fiber fraction of a dry grind ethanol plant as a feedstock to produce succinic acid which has potential as a building block intermediate for a wide range of commodity chemicals.

Susanne Kleff

2007-03-24T23:59:59.000Z

184

Advanced Metering, Value-Added Services, and Communications-Based Applications for National Account Customers  

Science Conference Proceedings (OSTI)

As the electric utility industry progresses toward deregulation, many different approaches will be used by customers and energy brokers to leverage their buying power through bulk electricity purchases. This report documents interviews with national account customers to determine the advanced information, communications, and metering systems needed to deliver, monitor, and bill such purchases.

1997-04-18T23:59:59.000Z

185

DOE/SC-ARM/TR-133 Aerosol Optical Depth Value-Added  

NLE Websites -- All DOE Office Websites (Extended Search)

of Science, Office of Biological and Environmental Research B Ermold, September 2013, DOESC-ARM-133 Contents 1.0 Introduction ......

186

Assessment of Value Added for Surface Marine Wind Speed Obtained from Two Regional Climate Models  

Science Conference Proceedings (OSTI)

Hindcasts with reanalysis-driven regional climate models (RCMs) are a common tool to assess weather statistics (i.e., climate) and recent changes and trends. The capability of different state-of-the-art RCMs (with and without spectral nudging ...

Jörg Winterfeldt; Ralf Weisse

2009-09-01T23:59:59.000Z

187

Wastes and by-products - alternatives for agricultural use  

Science Conference Proceedings (OSTI)

Top address a growing national problem with generation of wastes and by-products, TVA has been involved for several years with developing and commercializing environmentally responsible practices for eliminating, minimizing, or utilizing various wastes/by-products. In many cases, reducing waste generation is impractical, but the wastes/by-products can be converted into other environmentally sound products. In some instances, conversion of safe, value-added agricultural products in the best or only practical alternative. TVA is currently involved with a diversity of projects converting wastes/by-products into safe, economical, and agriculturally beneficial products. Environmental improvement projects have involved poultry litter, cellulosic wastes, used battery acid, ammonium sulfate fines, lead smelting effluents, deep-welled sulfuric acid/ammonium bisulfate solutions, wood ash, waste magnesium ammonium sulfate slurry from recording tape production, and ammunition plant waste sodium nitrate/ammonium nitrate streams.

Boles, J.L.; Craft, D.J.; Parker, B.R.

1994-10-01T23:59:59.000Z

188

ARM - Evaluation Product - Corrected Moments in Antenna Coordinates  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsCorrected Moments in Antenna Coordinates ProductsCorrected Moments in Antenna Coordinates Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Evaluation Product : Corrected Moments in Antenna Coordinates Site(s) SGP TWP General Description Raw moments from the scanning ARM precipitation radars (SAPRs) are subject to a number of instrumental and atmospheric phenomena that must be retrieved and corrected for. The Corrected Moments in Antenna Coordinates (CMAC) value-added product contains both raw data and fields that have been processed to: · correct for velocity aliasing · unfold and generate a cross-polarimetric phase difference that is monotonically increasing, removing impulses caused by non-uniform beam filling and phase shift on backscatter · recalculate specific differential phase using a 20-point Sobel filter on

189

ARM Climate Research Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 ARM Climate Research Facility Spectral Surface Albedo Value-Added Product (VAP) Report S McFarlane K Gaustad C Long E Mlawer July 2011 DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or

190

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Surface Cloud Condensation Nuclei Average Evaluation Product Available Surface Cloud Condensation Nuclei Average Evaluation Product Available Bookmark and Share This plot shows the concentration of CCN measured by the cloud condensation particle counter versus the concentration measured by the condensation particle counter. This plot shows the concentration of CCN measured by the cloud condensation particle counter versus the concentration measured by the condensation particle counter. Aerosol observing systems (AOS) at ARM's sites measure cloud condensation nuclei (CCN) at several supersaturations using a single-column CCN counter. The Average of Cloud Condensation Nuclei from AOS (AOSCCNAVG) value-added product (VAP) was developed to consolidate the relevant CCN parameters into a single file and average data over the 5-minute integration time of each

191

Bench-Scale Cross Flow Filtration of  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2 ARM Value-Added Product (VAP) Monthly Status Report ARM Translator Team J. Comstock C. Flynn M. Jensen C. Long S. McFarlane D. Turner S. Xie October 1, 2007 Work supported by the U.S. Department of Energy, Office of Science, Office of Biological and Environmental Research DISCLAIMER This report was prepared as an account of work sponsored by the U.S. Government. Neither the United States nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service

192

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

November 12, 2009 [Data Announcements] November 12, 2009 [Data Announcements] Updated Evaluation Product Available for Calculating Surface Spectral Albedo Bookmark and Share Example of surface type estimation and high-resolution spectral albedo extrapolated from the MFR measurements at the 10-meter tower and at the 25-meter level on the 60-meter tower at the SGP Central Facility. Example of surface type estimation and high-resolution spectral albedo extrapolated from the MFR measurements at the 10-meter tower and at the 25-meter level on the 60-meter tower at the SGP Central Facility. An updated version of the Surface Spectral Albedo (SurfSpecAlb1Mlawer) value-added product (VAP) has been released as an Evaluation Product for the Southern Great Plains (SGP) site. The original version of the algorithm

193

Onestep production of biocommodities from lignocellulosic biomass by recombinant cellulolytic Bacillus subtilis: Opportunities and challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

One-step One-step production of biocommodities from lignocellulosic biomass by recombinant cellulolytic Bacillus subtilis: Opportunities and challenges One-step consolidated bioprocessing that integrates cellulase production, cellulose hydrolysis, and product fermentation into a single step for decreasing costly cellulase use, increasing volumetric productivity, and reducing capital investment is widely accepted for low-cost production of biofuels or other value-added biochemicals. Considering the narrow margins between biomass and low-value biocommodities, good physiological performance of industrial microbes is crucial for economically viable production. Bacillus subtilis, the best-characterized Gram-positive microorganism, is a major industrial microorganism with numerous valuable features such as hexose and pentose utilization, low-nutrient needs,

194

BNL | Cloud Lifecycle Infrastructure  

NLE Websites -- All DOE Office Websites (Extended Search)

Cloud Life Cycle Infrastructure Cloud Life Cycle Infrastructure An important component of any long-term atmospheric measurement program is the quality control and maintenance of the datastreams from instrument systems. Further, the raw measurements from atmospheric remote sensing instrumentation are not directly useable by the majority of the scientific community. These raw measurements must be interpreted and converted to geophysical quantities that can be more readily used by a greater number of scientists to address important questions regarding the Earth's climate system. The cloud life cycle infrastructure group at BNL is led by Dr. Michael Jensen and is responsible for the development and production of cloud-related value-added products (VAPs). The cloud life cycle infrastructure group also provides mentorships for the millimeter cloud

195

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

September 19, 2013 [Data Announcements] September 19, 2013 [Data Announcements] New ARM Best Estimate Land Product Contains Critical Soil Quantities for Describing Land Properties Bookmark and Share Soil moisture at the SGP Central Facility site for 1998, mean over five EBBR sensors, measured at 5 centimeters underground. Soil moisture at the SGP Central Facility site for 1998, mean over five EBBR sensors, measured at 5 centimeters underground. The ARM Best Estimate: Land (ARMBELAND) value-added prduct (VAP) is a subset of the ARM Best Estimate (ARMBE) products designed to support community land-atmospheric research and land model developments. It contains several critical soil quantities that ARM has been measuring for many years for describing land properties. The quantities in ARMBELAND are

196

Variablity among electronic cigarettes in the pressure drop, airflow rate, and aerosol production  

E-Print Network (OSTI)

OH), (b) Crown Seven Hydro Im- perial with USA blenda brand. Crown Seven Hydro Imperial and Smoking EverywhereStix #2, VapCigs #2, Crown Seven Hydro Imperial, and Smoking

Talbot, Prue

2013-01-01T23:59:59.000Z

197

DOE Tech. Memo. ARM VAP-002.1  

NLE Websites -- All DOE Office Websites (Extended Search)

RF mismatch. 2.6 Antenna The antenna is a fixed position, vertically pointing parabolic dish with a rearmounted feed and Casegrain sub-reflector. A 10-foot diameter antenna,...

198

ARM AOS Processing Status and Aerosol Intensive Properties VAP  

NLE Websites -- All DOE Office Websites (Extended Search)

Andrews, and P. J. Sheridan National Oceanic and Atmospheric Administration Boulder, Colorado Abstract The Atmospheric Radiation Measurement (ARM) Aerosol Observing System (AOS)...

199

Top Value Added Chemicals from Biomass: Volume I -- Results of Screening for Potential Candidates from Sugars and Synthesis Gas  

DOE Green Energy (OSTI)

This report identifies twelve building block chemicals that can be produced from sugars via biological or chemical conversions. The twelve building blocks can be subsequently converted to a number of high-value bio-based chemicals or materials. Building block chemicals, as considered for this analysis, are molecules with multiple functional groups that possess the potential to be transformed into new families of useful molecules. The twelve sugar-based building blocks are 1,4-diacids (succinic, fumaric and malic), 2,5-furan dicarboxylic acid, 3-hydroxy propionic acid, aspartic acid, glucaric acid, glutamic acid, itaconic acid, levulinic acid, 3-hydroxybutyrolactone, glycerol, sorbitol, and xylitol/arabinitol.

Werpy, T.; Petersen, G.

2004-08-01T23:59:59.000Z

200

1  

NLE Websites -- All DOE Office Websites (Extended Search)

Evaluation of Cloud Cover, Cloud Effect, and Surface Evaluation of Cloud Cover, Cloud Effect, and Surface Radiation Budgets at the SGP and TWP ARM Sites K. L. Gaustad and C. N. Long Pacific Northwest National Laboratory Richland, Washington Introduction The U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Program has established networks of broadband shortwave (SW) radiometers at each of its field research sites. The shortwave flux analysis value-added product (SWFuxAnal VAP) applies a clear-sky detection and fitting technique to data collected from these sensors to identify clear-sky conditions, produce a continuous estimate of clear-sky SW irradiance, and assess the effect of cloudiness on downwelling SW measurements. The clear-sky detection algorithm has been expanded to allow its use in not only

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Data Quality of Quality Measurement Experiments  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Quality of Quality Measurement Experiments Data Quality of Quality Measurement Experiments S. Bottone and S. Moore Mission Research Corporation Santa Barbara, California Introduction Quality Measurement Experiments (QME) are a special class of Value-Added Products (VAP). QMEs add value to Atmospheric Radiation Measurement (ARM) Program datastreams by providing for continuous assessment of the quality of incoming data based on internal consistency checks, comparisons between independent similar measurements, or comparisons between measurements and modeled results. Like any datastream, QME datastreams need to be checked for data quality. For each QME, we analyze a representative sample of files from the ARM data archive to determine 'typical' values of the QME variables. We then design outlier tests, specific to each variable, to be applied to

202

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Large-Scale Forcing Data Set for SPARTICUS Available Large-Scale Forcing Data Set for SPARTICUS Available Bookmark and Share Precipitation (top) and Omega (bottom) in April 2010 at SGP based on large-scale forcing data for SPARTICUS. Precipitation (top) and Omega (bottom) in April 2010 at SGP based on large-scale forcing data for SPARTICUS. A new large-scale forcing data set is now available for the Variational Analysis (VARANAL) value-added product (VAP) using data from the Small Particles in Cirrus (SPARTICUS) field campaign. The constrained variational objective analysis approach described in Zhang and Lin (1997) and Zhang et al. (2001) was used to derive the large-scale single-column/cloud-resolving model forcing and evaluation data set from the observational data collected at ARM Facility's Southern Great Plains

203

Microsoft Word - long-cn.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

Next Generation Flux Analysis: Adding Clear-Sky LW Next Generation Flux Analysis: Adding Clear-Sky LW and LW Cloud Effects, Cloud Optical Depths, and Improved Sky Cover Estimates C. N. Long Pacific Northwest National Laboratory Richland, Washington Introduction The original Shortwave Flux Analysis (SWFA), based on Long and Ackerman (2000) and Long et al. (1999), deals only with daylight shortwave (SW) data. The SWFA algorithm produces continuous estimates of clear-sky downwelling diffuse, direct, and total SW; estimated fractional sky cover; and identification of when the sky was cloudless. This algorithm package is being produced as an Atmospheric Radiation Measurement (ARM) value-added product (VAP), as described in Long and Gaustad (2001). Subsequent efforts for analysis of surface broadband radiation and meteorological measurements now

204

ARM - Publications: Science Team Meeting Documents: MICROBASE, A Continuous  

NLE Websites -- All DOE Office Websites (Extended Search)

MICROBASE, A Continuous Baseline Microphysical Retrieval: Status and Future MICROBASE, A Continuous Baseline Microphysical Retrieval: Status and Future Plans Miller, Mark Brookhaven National Laboratory Johnson, Karen Brookhaven National Laboratory Michael, Paul Brookhaven National Laboratory Mace, Gerald University of Utah The MICROBASE_PI and MICROBASE_PA value-added products (VAPs) are integral components of the Broadband Heating Rate Profile (BBHRP) project of the Atmospheric Radiation Measurement (ARM) Program. The goal of the BBHRP project is to determine atmospheric heating and cooling rate profiles in the column above the active sensors at each ARM Climate Research Facility (ACRF) sites and within a larger volume around each site, representative of a global climate model grid cell. To produce the heating rate profiles,

205

COAL DERIVED MATRIX PITCHES FOR CARBON-CARBON COMPOSITE MANUFACTURE/PRODUCTION OF FIBERS AND COMPOSITES FROM COAL-BASED PRECURSORS  

Science Conference Proceedings (OSTI)

The Consortium for premium Carbon Products from Coal, with funding from the US Department of Energy, National Energy Technology Laboratory continue with the development of innovative technologies that will allow coal or coal-derived feedstocks to be used in the production of value-added carbon materials. In addition to supporting eleven independent projects during budget period 3, three meetings were held at two separate locations for the membership. The first was held at Nemacolin Woodlands Resort on May 15-16, 2000. This was followed by two meetings at Penn State, a tutorial on August 11, 2000 and a technical progress meeting on October 26-27.

Peter G. Stansberry; John W. Zondlo

2001-07-01T23:59:59.000Z

206

Microsoft PowerPoint - cldclass_final_v.ppt  

NLE Websites -- All DOE Office Websites (Extended Search)

Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase A Value Added Product for Cloud Type and Cloud Phase Classification Classification Classification Classification Classification Classification Classification Classification Chaomei Chaomei Chaomei Chaomei Chaomei Chaomei Chaomei Chaomei Lo, Jennifer M. Comstock, Pacific Northwest National Laboratory Lo, Jennifer M. Comstock, Pacific Northwest National Laboratory Lo, Jennifer M. Comstock, Pacific Northwest National Laboratory

207

Microbiological Production of Surfactant from Agricultural Residuals for IOR Application  

SciTech Connect

Utilization of surfactants for improved oil recovery (IOR) is an accepted technique with high potential. However, technology application is frequently limited by cost. Biosurfactants (surface-active molecules produced by microorganisms) are not widely utilized in the petroleum industry due to high production costs associated with use of expensive substrates and inefficient product recovery methods. The economics of biosurfactant production could be significantly impacted through use of media optimization and application of inexpensive carbon substrates such as agricultural process residuals. Utilization of biosurfactants produced from agricultural residuals may 1) result in an economic advantage for surfactant production and technology application, and 2) convert a substantial agricultural waste stream to a value-added product for IOR. A biosurfactant with high potential for use is surfactin, a lipopeptide biosurfactant, produced by Bacillus subtilis. Reported here is the production and potential IOR utilization of surfactin produced by Bacillus subtilis (American Type Culture Collection (ATCC) 21332) from starch-based media. Production of surfactants from microbiological growth media based on simple sugars, chemically pure starch medium, simulated liquid and solid potato-process effluent media, a commercially prepared potato starch in mineral salts, and process effluent from a potato processor is discussed. Additionally, the effect of chemical and physical pretreatments on starchy feedstocks is discussed.

Bala, Greg Alan; Bruhn, Debby Fox; Fox, Sandra Lynn; Noah, Karl Scott; Thompson, David Neal

2002-04-01T23:59:59.000Z

208

Glass Production  

E-Print Network (OSTI)

40, pp. 162 - 186. Glass Production, Shortland, UEE 2009AINES Short Citation: Shortland 2009, Glass Production. UEE.Andrew, 2009, Glass Production. In Willeke Wendrich (ed. ),

Shortland, Andrew

2009-01-01T23:59:59.000Z

209

Production Targets  

E-Print Network (OSTI)

Hall (2005), “Prices, Production, and Inventories over theProduction Targets ? Guillermo Caruana CEMFI caruana@cem?.esthe theory using monthly production targets of the Big Three

Caruana, Guillermo; Einav, Liran

2005-01-01T23:59:59.000Z

210

Pottery Production  

E-Print Network (OSTI)

Paul T. Nicholson. ) Pottery Production, Nicholson, UEE 2009Short Citation: Nicholson 2009, Pottery Production. UEE.Paul T. , 2009, Pottery Production. In Willeke Wendrich (

Nicholson, Paul T.

2009-01-01T23:59:59.000Z

211

Cordage Production  

E-Print Network (OSTI)

294: fig. 15-3). Cordage Production, Veldmeijer, UEE 2009Short Citation: Veldmeijer, 2009, Cordage Production. UEE.André J. , 2009, Cordage Production. In Willeke Wendrich (

Veldmeijer, André J.

2009-01-01T23:59:59.000Z

212

Hydrogen Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Production DELIVERY FUEL CELLS STORAGE PRODUCTION TECHNOLOGY VALIDATION CODES & STANDARDS SYSTEMS INTEGRATION ANALYSES SAFETY EDUCATION RESEARCH & DEVELOPMENT Economy...

213

Thermal conversion of municipal solid waste via hydrothermal carbonization: Comparison of carbonization products to products from current waste management techniques  

Science Conference Proceedings (OSTI)

Highlights: Black-Right-Pointing-Pointer Hydrothermal carbonization (HTC) is a novel thermal conversion process. Black-Right-Pointing-Pointer HTC converts wastes into value-added resources. Black-Right-Pointing-Pointer Carbonization integrates majority of carbon into solid-phase. Black-Right-Pointing-Pointer Carbonization results in a hydrochar with high energy density. Black-Right-Pointing-Pointer Using hydrochar as an energy source may be beneficial. - Abstract: Hydrothermal carbonization (HTC) is a novel thermal conversion process that may be a viable means for managing solid waste streams while minimizing greenhouse gas production and producing residual material with intrinsic value. HTC is a wet, relatively low temperature (180-350 Degree-Sign C) thermal conversion process that has been shown to convert biomass to a carbonaceous residue referred to as hydrochar. Results from batch experiments indicate HTC of representative waste materials is feasible, and results in the majority of carbon (45-75% of the initially present carbon) remaining within the hydrochar. Gas production during the batch experiments suggests that longer reaction periods may be desirable to maximize the production of energy-favorable products. If using the hydrochar for applications in which the carbon will remain stored, results suggest that the gaseous products from HTC result in fewer g CO{sub 2}-equivalent emissions than the gases associated with landfilling, composting, and incineration. When considering the use of hydrochar as a solid fuel, more energy can be derived from the hydrochar than from the gases resulting from waste degradation during landfilling and anaerobic digestion, and from incineration of food waste. Carbon emissions resulting from the use of the hydrochar as a fuel source are smaller than those associated with incineration, suggesting HTC may serve as an environmentally beneficial alternative to incineration. The type and extent of environmental benefits derived from HTC will be dependent on hydrochar use/the purpose for HTC (e.g., energy generation or carbon storage).

Lu Xiaowei; Jordan, Beth [Department of Civil and Environmental Engineering, University of South Carolina, 300 Main Street, Columbia, SC 29208 (United States); Berge, Nicole D., E-mail: berge@cec.sc.edu [Department of Civil and Environmental Engineering, University of South Carolina, 300 Main Street, Columbia, SC 29208 (United States)

2012-07-15T23:59:59.000Z

214

Compliance of small firms with the value added tax : a study of the supply chain of small parts for buses in Columbia  

E-Print Network (OSTI)

Governments are coming under increasing pressure to augment their revenues to offset the social costs of globalization and ever-widening trade and capital liberalization. Unarguably, the most sustainable way to procure ...

Ruiz, Francisco (Ruiz Peronard)

2006-01-01T23:59:59.000Z

215

Low-rank coal oil agglomeration product and process  

DOE Patents (OSTI)

A selectively-sized, raw, low-rank coal is processed to produce a low ash and relative water-free agglomerate with an enhanced heating value and a hardness sufficient to produce a non-degradable, shippable fuel. The low-rank coal is treated, under high shear conditions, in the first stage to cause ash reduction and subsequent surface modification which is necessary to facilitate agglomerate formation. In the second stage the treated low-rank coal is contacted with bridging and binding oils under low shear conditions to produce agglomerates of selected size. The bridging and binding oils may be coal or petroleum derived. The process incorporates a thermal deoiling step whereby the bridging oil may be completely or partially recovered from the agglomerate; whereas, partial recovery of the bridging oil functions to leave as an agglomerate binder, the heavy constituents of the bridging oil. The recovered oil is suitable for recycling to the agglomeration step or can serve as a value-added product.

Knudson, C.L.; Timpe, R.C.; Potas, T.A.; DeWall, R.A.; Musich, M.A.

1992-11-10T23:59:59.000Z

216

Low-rank coal oil agglomeration product and process  

DOE Patents (OSTI)

A selectively-sized, raw, low-rank coal is processed to produce a low ash and relative water-free agglomerate with an enhanced heating value and a hardness sufficient to produce a non-decrepitating, shippable fuel. The low-rank coal is treated, under high shear conditions, in the first stage to cause ash reduction and subsequent surface modification which is necessary to facilitate agglomerate formation. In the second stage the treated low-rank coal is contacted with bridging and binding oils under low shear conditions to produce agglomerates of selected size. The bridging and binding oils may be coal or petroleum derived. The process incorporates a thermal deoiling step whereby the bridging oil may be completely or partially recovered from the agglomerate; whereas, partial recovery of the bridging oil functions to leave as an agglomerate binder, the heavy constituents of the bridging oil. The recovered oil is suitable for recycling to the agglomeration step or can serve as a value-added product.

Knudson, Curtis L. (Grand Forks, ND); Timpe, Ronald C. (Grand Forks, ND); Potas, Todd A. (Plymouth, MN); DeWall, Raymond A. (Grand Forks, ND); Musich, Mark A. (Grand Forks, ND)

1992-01-01T23:59:59.000Z

217

RMOTC - Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Production RMOTC Pumpjack in action During the process of the sale of NPR-3, RMOTC will focus on maximizing the value of the NPR-3 site and will continue with its Production Optimization Projects. NPR-3 includes 9,481 acres with more than 400 oil-producing wells. Current oil production is at approximately 240 barrels of oil per day. In July 2013, RMOTC began working on a number of Production Optimization Projects within the NPR-3 field, with the goal to optimize and improve flow and efficiency. Production Optimization Projects include repairing and replacing existing infrastructure with new infrastructure in order to optimize current wells and bring additional wells online. These Production Optimization Projects will continue throughout 2013 and are focused on improving current production and creating revenue for the America tax payer.

218

Antihydrogen production  

SciTech Connect

Antihydrogen production in ATHENA is analyzed more carefully. The most important peculiarities of the different experimental situations are discussed. The protonium production via the first matter-antimatter chemical reaction is commented too.

Rizzini, Evandro Lodi; Venturelli, Luca; Zurlo, Nicola [Dipartimento di Chimica e Fisica per l'Ingegneria e per i Materiali, Universita di Brescia, 25133 Brescia (Italy); Istituto Nazionale di Fisica Nucleare, Gruppo Collegato di Brescia, 25133 Brescia (Italy)

2008-08-08T23:59:59.000Z

219

Tin Production  

Science Conference Proceedings (OSTI)

...descending order, Brazil, Indonesia, Malaysia, Thailand, Bolivia, and Australia. These countries supply more than 85% of total world production....

220

ARM - Publications: Science Team Meeting Documents: The Merged...  

NLE Websites -- All DOE Office Websites (Extended Search)

of Utah The Merged-Sounding VAP is the much anticipated product which provides a thermodynamic profile of the atmosphere in one minute intervals. As the product is refined for...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Biomass Biorefinery for the production of Polymers and Fuels  

DOE Green Energy (OSTI)

The conversion of biomass crops to fuel is receiving considerable attention as a means to reduce our dependence on foreign oil imports and to meet future energy needs. Besides their use for fuel, biomass crops are an attractive vehicle for producing value added products such as biopolymers. Metabolix, Inc. of Cambridge proposes to develop methods for producing biodegradable polymers polyhydroxyalkanoates (PHAs) in green tissue plants as well as utilizating residual plant biomass after polymer extraction for fuel generation to offset the energy required for polymer extraction. The primary plant target is switchgrass, and backup targets are alfalfa and tobacco. The combined polymer and fuel production from the transgenic biomass crops establishes a biorefinery that has the potential to reduce the nation’s dependence on foreign oil imports for both the feedstocks and energy needed for plastic production. Concerns about the widespread use of transgenic crops and the grower’s ability to prevent the contamination of the surrounding environment with foreign genes will be addressed by incorporating and expanding on some of the latest plant biotechnology developed by the project partners of this proposal. This proposal also addresses extraction of PHAs from biomass, modification of PHAs so that they have suitable properties for large volume polymer applications, processing of the PHAs using conversion processes now practiced at large scale (e.g., to film, fiber, and molded parts), conversion of PHA polymers to chemical building blocks, and demonstration of the usefulness of PHAs in large volume applications. The biodegradability of PHAs can also help to reduce solid waste in our landfills. If successful, this program will reduce U.S. dependence on imported oil, as well as contribute jobs and revenue to the agricultural economy and reduce the overall emissions of carbon to the atmosphere.

Dr. Oliver P. Peoples

2008-05-05T23:59:59.000Z

222

Minnesota agripower project. Quarterly report, April--June 1997  

DOE Green Energy (OSTI)

The Minnesota Valley Alfalfa Producers (MnVAP) propose to build an alfalfa processing plant integrated with an advanced power plant system at the Granite Falls, Minnesota Industrial Park to provide 75 MW of base load electric power and a competitively priced source of value added alfalfa based products. This project will utilize air blown fluidized bed gasification technology to process alfalfa stems and another biomass to produce a hot, clean, low heating value gas that will be used in a gas turbine. Exhaust heat from the gas turbine will be used to generate steam to power a steam turbine and provide steam for the processing of the alfalfa leaf into a wide range of products including alfalfa leaf meal, a protein source for livestock. The plant will demonstrate high efficiency and environmentally compatible electric power production, as well as increased economic yield from farm operations in the region. The initial phase of the Minnesota Agripower Project (MAP) will be to perform alfalfa feedstock testing, prepare preliminary designs, and develop detailed plans with estimated costs for project implementation. The second phase of MAP will include detailed engineering, construction, and startup. Full commercial operation will start in 2001.

Baloun, J.

1997-07-01T23:59:59.000Z

223

Topic: Productivity  

Science Conference Proceedings (OSTI)

... General Information: 301-975-5020 mfg@nist ... competitive in the global market, companies need to ... become more efficient in energy, production and ...

2013-09-26T23:59:59.000Z

224

Silicon Production  

Science Conference Proceedings (OSTI)

Mar 12, 2012 ... An Investigation into the Electrochemical Production of Si by the FFC Cambridge Process: Emre Ergül1; ?shak Karakaya2; Metehan Erdo?an2; ...

225

OIL PRODUCTION  

NLE Websites -- All DOE Office Websites (Extended Search)

OIL PRODUCTION Enhanced Oil Recovery (EOR) is a term applied to methods used for recovering oil from a petroleum reservoir beyond that recoverable by primary and secondary methods....

226

Hydrogen Production  

Office of Scientific and Technical Information (OSTI)

Hydrogen Production Hydrogen Research in DOE Databases Energy Citations Database Information Bridge Science.gov WorldWideScience.org Increase your H2IQ More information Making...

227

Hydrogen Production  

Fuel Cell Technologies Publication and Product Library (EERE)

This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

228

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

October 14, 2011 Data Announcements Raman Lidar Data Product Suite Provides Best-Estimate Data Bookmark and Share Example of plots produced by the Raman lidar best-estimate VAP...

229

Hydrogen production  

SciTech Connect

The production of hydrogen by reacting an ash containing material with water and at least one halogen selected from the group consisting of chlorine, bromine and iodine to form reaction products including carbon dioxide and a corresponding hydrogen halide is claimed. The hydrogen halide is decomposed to separately release the hydrogen and the halogen. The halogen is recovered for reaction with additional carbonaceous materials and water, and the hydrogen is recovered as a salable product. In a preferred embodiment the carbonaceous material, water and halogen are reacted at an elevated temperature. In accordance with another embodiment, a continuous method for the production of hydrogen is provided wherein the carbonaceous material, water and at least one selected halogen are reacted in one zone, and the hydrogen halide produced from the reaction is decomposed in a second zone, preferably by electrolytic decomposition, to release the hydrogen for recovery and the halogen for recycle to the first zone. There also is provided a method for recovering any halogen which reacts with or is retained in the ash constituents of the carbonaceous material.

Darnell, A.J.; Parkins, W.E.

1978-08-08T23:59:59.000Z

230

Product Forms  

Science Conference Proceedings (OSTI)

Table 1 Wrought alloy products and tempers...or cold-finished Rivets Forgings and forging stock Foil Fin stock Drawn Extruded Rod Bar Wire 1050 . . . . . . . . . H112 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1060 O, H12, H14, H16, H18 O, H12, H14, H112 O, H12, H14, H18, H113 O, H112 . . . .

231

Production Practice  

Science Conference Proceedings (OSTI)

...Figure 1 shows the sequence of shapes in the production of a hollow handle for a table knife formed and coined in a 410 kg (900 lb) pneumatic drop hammer. The work metal was 0.81 mm (0.032 in.) thick copper alloy C75700 (nickel silver, 65â??12) annealed to a hardness of 35 to 45 HRB; blank size was 25 by...

232

Biofuel Production  

E-Print Network (OSTI)

Copyright © 2011 Hiroshi Sakuragi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited. Large amounts of fossil fuels are consumed every day in spite of increasing environmental problems. To preserve the environment and construct a sustainable society, the use of biofuels derived from different kinds of biomass is being practiced worldwide. Although bioethanol has been largely produced, it commonly requires food crops such as corn and sugar cane as substrates. To develop a sustainable energy supply, cellulosic biomass should be used for bioethanol production instead of grain biomass. For this purpose, cell surface engineering technology is a very promising method. In biobutanol and biodiesel production, engineered host fermentation has attracted much attention; however, this method has many limitations such as low productivity and low solvent tolerance of microorganisms. Despite these problems, biofuels such as bioethanol, biobutanol, and biodiesel are potential energy sources that can help establish a sustainable society. 1.

Hiroshi Sakuragi; Kouichi Kuroda; Mitsuyoshi Ueda

2010-01-01T23:59:59.000Z

233

Synthetic fuels: production and products  

DOE Green Energy (OSTI)

A brief primer on synthetic fuels is given. The paper includes brief descriptions of generic conversion technologies that can be used to convert various raw materials such as coal, oil shale, tar sands, peat, and biomass into synthetic fuels similar in character to petroleum-derived fuels currently in commerce. References for additional information on synthetic fuel processes and products are also given in the paper.

Singh, S.P.N.

1984-01-01T23:59:59.000Z

234

Synthetic fuels: production and products  

DOE Green Energy (OSTI)

A brief review on synthetic fuels is given. The paper includes brief descriptions of generic conversion technologies that can be used to convert various raw materials such as coal, oil shale, tar sands, peat and biomass into synthetic fuels similar in character to petroleum-derived fuels currently in commerce. Because the subject is vast and the space is limited, references for additional information on synthetic fuel processes and products are also given in the paper. 24 references.

Singh, S.P.

1985-08-01T23:59:59.000Z

235

Sugar Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Sugar Production Sugar Production Name: Lauren Location: N/A Country: N/A Date: N/A Question: This is the experiment I did: our class took 6 sugars, placed them in test tubes and put three drops of yeast in each test tube. we then placed them in the incubator for one day and the next day looked at our results. the purpose was to find out with sugar would produce the most carbon dioxide. two of the sugars that we tested were LACTOSE and STARCH. my question is, why are lactose and starch the only sugars who didn't produce any, or very very little, carbon dioxide? and how is this process related to glycolysis? Replies: Bacteria and yeast are very efficient with their enzyme systems. They don't make enzymes they can't use. Yeast don't have the enzymes necessary to metabolize lactose. Starch is a complex sugar and yeast needs certain enzymes to break starch down into sugar. Every chemical reaction needs its own enzyme.

236

NETL: U.S. Economic Competitiveness  

NLE Websites -- All DOE Office Websites (Extended Search)

for (1) enhanced oil recovery (EOR), thereby increasing the production of domestic oil, or (2) as feedstock for value-added products of commerce. Furthermore, natural gas...

237

Treatment and Minimization of Aluminum and Light Metals Industry ...  

Science Conference Proceedings (OSTI)

3:15 pm. PRODUCTION OF VALUE-ADDED PRODUCTS THROUGH PHOSPHATE STABILIZATION OF ALUMINUM INDUSTRY WASTE: Arun S. Wagh, Energy ...

238

Production Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Welcome Welcome The Production Services site contains links to each of the division's groups with descriptions of their services. Our goal is to update this website frequently to reflect ongoing service upgrades which, by planning and design, are added so that we can continue to meet your needs in a constantly changing work environment. Note: The Graphic Design Studio has been relocated to the second floor in the north wing of the Research Support Building 400. The telephone number remains the same, X7288. If you have any questions, please call supervisor, Rick Backofen, X6183. Photography Photography services are available at no charge to BNL and Guest users. See a list of the complete range of photography services available. Video Video services are available at no charge to BNL and Guest users. See a list of the complete range of video services available.

239

Stone Tool Production  

E-Print Network (OSTI)

by the author. ) Stone Tool Production, Hikade, UEE 2010Short Citation: Hikade 2010, Stone Tool Production. UEE.Thomas, 2010, Stone Tool Production. In Willeke Wendrich (

Hikade, Thomas

2010-01-01T23:59:59.000Z

240

FCT Hydrogen Production: Contacts  

NLE Websites -- All DOE Office Websites (Extended Search)

Contacts to someone by E-mail Share FCT Hydrogen Production: Contacts on Facebook Tweet about FCT Hydrogen Production: Contacts on Twitter Bookmark FCT Hydrogen Production:...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Refinery Integration of By-Products from Coal-Derived Jet Fuels  

SciTech Connect

The final report summarizes the accomplishments toward project goals during length of the project. The goal of this project was to integrate coal into a refinery in order to produce coal-based jet fuel, with the major goal to examine the products other than jet fuel. These products are in the gasoline, diesel and fuel oil range and result from coal-based jet fuel production from an Air Force funded program. The main goal of Task 1 was the production of coal-based jet fuel and other products that would need to be utilized in other fuels or for non-fuel sources, using known refining technology. The gasoline, diesel fuel, and fuel oil were tested in other aspects of the project. Light cycle oil (LCO) and refined chemical oil (RCO) were blended, hydrotreated to removed sulfur, and hydrogenated, then fractionated in the original production of jet fuel. Two main approaches, taken during the project period, varied where the fractionation took place, in order to preserve the life of catalysts used, which includes (1) fractionation of the hydrotreated blend to remove sulfur and nitrogen, followed by a hydrogenation step of the lighter fraction, and (2) fractionation of the LCO and RCO before any hydrotreatment. Task 2 involved assessment of the impact of refinery integration of JP-900 production on gasoline and diesel fuel. Fuel properties, ignition characteristics and engine combustion of model fuels and fuel samples from pilot-scale production runs were characterized. The model fuels used to represent the coal-based fuel streams were blended into full-boiling range fuels to simulate the mixing of fuel streams within the refinery to create potential 'finished' fuels. The representative compounds of the coal-based gasoline were cyclohexane and methyl cyclohexane, and for the coal-base diesel fuel they were fluorine and phenanthrene. Both the octane number (ON) of the coal-based gasoline and the cetane number (CN) of the coal-based diesel were low, relative to commercial fuels ({approx}60 ON for coal-based gasoline and {approx}20 CN for coal-based diesel fuel). Therefore, the allowable range of blending levels was studied where the blend would achieve acceptable performance. However, in both cases of the coal-based fuels, their ignition characteristics may make them ideal fuels for advanced combustion strategies where lower ON and CN are desirable. Task 3 was designed to develop new approaches for producing ultra clean fuels and value-added chemicals from refinery streams involving coal as a part of the feedstock. It consisted of the following three parts: (1) desulfurization and denitrogenation which involves both new adsorption approach for selective removal of nitrogen and sulfur and new catalysts for more effective hydrotreating and the combination of adsorption denitrogenation with hydrodesulfurization; (2) saturation of two-ring aromatics that included new design of sulfur resistant noble-metal catalysts for hydrogenation of naphthalene and tetralin in middle distillate fuels, and (3) value-added chemicals from naphthalene and biphenyl, which aimed at developing value-added organic chemicals from refinery streams such as 2,6-dimethylnaphthalene and 4,4{prime}-dimethylbiphenyl as precursors to advanced polymer materials. Major advances were achieved in this project in designing the catalysts and sorbent materials, and in developing fundamental understanding. The objective of Task 4 was to evaluate the effect of introducing coal into an existing petroleum refinery on the fuel oil product, specifically trace element emissions. Activities performed to accomplish this objective included analyzing two petroleum-based commercial heavy fuel oils (i.e., No. 6 fuel oils) as baseline fuels and three co-processed fuel oils, characterizing the atomization performance of a No. 6 fuel oil, measuring the combustion performance and emissions of the five fuels, specifically major, minor, and trace elements when fired in a watertube boiler designed for natural gas/fuel oil, and determining the boiler performance when firing the five fuels. Two

Caroline Clifford; Andre Boehman; Chunshan Song; Bruce Miller; Gareth Mitchell

2008-03-31T23:59:59.000Z

242

Petroleum - Exploration & Production - EIA  

U.S. Energy Information Administration (EIA)

Exploration and reserves, storage, imports and exports, production, prices, sales. Electricity. ... Oil Production Capacity Expansion Costs for the Persian Gulf.

243

Biological production of products from waste gases  

DOE Patents (OSTI)

A method and apparatus are designed for converting waste gases from industrial processes such as oil refining, and carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various products, such as organic acids, alcohols, hydrogen, single cell protein, and salts of organic acids by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified.

Gaddy, James L. (Fayetteville, AR)

2002-01-22T23:59:59.000Z

244

Covered Product Category: Cool Roof Products  

Energy.gov (U.S. Department of Energy (DOE))

FEMP provides acquisition guidance across a variety of product categories, including cool roof products, which are an ENERGY STAR®-qualified product category. Federal laws and executive orders mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

245

Microsoft PowerPoint - Proceedings Cover Sheets  

NLE Websites -- All DOE Office Websites (Extended Search)

40 wt% Aged Compacted grout: 7 wt% * Favourable features: * Value-added products * No steam or heat requirement * Rapid curing time (20 - 40 min) * Homogeneous carbonate...

246

Degradation of Wellbore Cement Due to CO2 Injection  

NLE Websites -- All DOE Office Websites (Extended Search)

production. This is due to value-added opportunities such as enhanced oil recovery (EOR), enhanced gas recovery (EGR), and enhanced coal bed methane (ECBM) recovery. There...

247

--No Title--  

NLE Websites -- All DOE Office Websites (Extended Search)

plastic-like products. A similar material can also be made from lignin produced in biorefineries. The paper, titled "Turning renewable resources into value-added polymer:...

248

ENTREPRENEURSHIP ON THE FARM: KENTUCKY GROWERS’ PERCEPTIONS OF BENEFITS AND BARRIERS.  

E-Print Network (OSTI)

??This study analyzed the perceptions of Kentucky Homebased Processors and Microprocessors of the benefits of and barriers to developing and selling value-added products. The final… (more)

Camenisch, Amy L

2013-01-01T23:59:59.000Z

249

Investigation of Mo Extraction from a Spent Hydro-Cracking Catalyst ...  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

250

Development of Synthetic Flux for Basic Oxygen Steel Making Using ...  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

251

Cyanidation Recovery Process  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

252

Separation of Si/SiC wiresaw cutting powder through sedimentation ...  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

253

Dissolution of Mixed Zinc-Carbon and Alkaline Battery Powders in ...  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

254

Recycling of Reverted IN738LC with Reference to Mechanical ...  

Science Conference Proceedings (OSTI)

Heat Treatment of Black Dross for the Production of a Value Added Material ... Leaching Studies for Metals Recovery from Waste Printed Wiring Boards (PWBs).

255

ANALYSIS OF BIOMASS HARVEST, HANDLING, AND COMPUTER MODELING.  

E-Print Network (OSTI)

??Biomass materials are currently considered for use in direct combustion systems, and for value added products. The major roadblock associated with implementation of biomass into… (more)

Brownell, Douglas

2009-01-01T23:59:59.000Z

256

ARM - Data Announcements Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Lidar Value-Added Product Provides Cloud Measurements Bookmark and Share Sample plot generated by MPLCMASK. Click to enlarge. Sample plot generated by MPLCMASK. Click to enlarge....

257

WEB RESOURCES: Magnesium Production  

Science Conference Proceedings (OSTI)

Feb 12, 2007 ... Mg Production(Australia).pdf 49.21 KB MgProduction_Australia.mht 81.47 KB Mg Production(Brazil Israel Congo Malaysia).pdf 50.48 KB

258

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL DAAC MODIS Land Product Subsets MODIS Collection 5 Global Subsetting and Visualization Tool Create subset for user selected site, area, product, and time period. Data for...

259

Production Project Accounts  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Project Accounts Production Project Accounts Overview Most NERSC login accounts are associated with specific individuals and must not be shared. Sometimes it is...

260

from Isotope Production Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

Cancer-fighting treatment gets boost from Isotope Production Facility April 13, 2012 Isotope Production Facility produces cancer-fighting actinium - 2 - 2:32 Isotope cancer...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Century Model Product Available  

NLE Websites -- All DOE Office Websites (Extended Search)

Century Model Available The ORNL DAAC announces the availability of a new model product. The model product "CENTURY: Modeling Ecosystem Responses to Climate Change, Version 4...

262

Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA)

Home > Nuclear > Domestic Uranium Production Report Domestic Uranium Production Report Data for: 2005 Release Date: May 15, 2006 Next Release: May 15, 2007

263

Comparison of Productive Capacity  

U.S. Energy Information Administration (EIA)

Appendix B Comparison of Productive Capacity Comparisons of base case productive capacities for this and all previous studies were made (Figure B1).

264

2. Gas Productive Capacity  

U.S. Energy Information Administration (EIA)

2. Gas Productive Capacity Gas Capacity to Meet Lower 48 States Requirements The United States has sufficient dry gas productive capacity at the wellhead to meet ...

265

Illinois coal production pushes Illinois Basin production ...  

U.S. Energy Information Administration (EIA)

Coal production in the Illinois Basin during the first half of 2012 (64.4 million short tons) was 13% higher than the same period in 2011. This ...

266

By-Products Utilization  

E-Print Network (OSTI)

such as sodium bicarbonate, soda ash, trona, or nahcalite (ICF Northwest, 1988). By-products generated

Wisconsin-Milwaukee, University of

267

Targeting Products in Residential Markets: Comparing "Off-the-Shelf" and Custom Segmentation Systems  

Science Conference Proceedings (OSTI)

This report summarizes results of customer research designed to provide energy service companies that have an interest in selling value-added services with insight about selecting the best options among a variety of both "off-the-shelf" and custom segmentation tools.

2000-11-03T23:59:59.000Z

268

C1 CHEMISTRY FOR THE PRODUCTION OF ULTRA-CLEAN LIQUID TRANSPORTATION FUELS AND HYDROGEN  

DOE Green Energy (OSTI)

The Consortium for Fossil Fuel Science (CFFS) is a research consortium with participants from the University of Kentucky, University of Pittsburgh, University of Utah, West Virginia University, and Auburn University. The CFFS is conducting a research program to develop C1 chemistry technology for the production of clean transportation fuel from resources such as coal and natural gas, which are more plentiful domestically than petroleum. The processes under development will convert feedstocks containing one carbon atom per molecular unit into ultra clean liquid transportation fuels (gasoline, diesel, and jet fuel) and hydrogen, which many believe will be the transportation fuel of the future. These feedstocks include synthesis gas, a mixture of carbon monoxide and hydrogen produced by coal gasification or reforming of natural gas, methane, methanol, carbon dioxide, and carbon monoxide. Some highlights of the results obtained during the first year of the current research contract are summarized as: (1) Terminal alkynes are an effective chain initiator for Fischer-Tropsch (FT) reactions, producing normal paraffins with C numbers {ge} to that of the added alkyne. (2) Significant improvement in the product distribution towards heavier hydrocarbons (C{sub 5} to C{sub 19}) was achieved in supercritical fluid (SCF) FT reactions compared to that of gas-phase reactions. (3) Xerogel and aerogel silica supported cobalt catalysts were successfully employed for FT synthesis. Selectivity for diesel range products increased with increasing Co content. (4) Silicoaluminophosphate (SAPO) molecular sieve catalysts have been developed for methanol to olefin conversion, producing value-added products such as ethylene and propylene. (5) Hybrid Pt-promoted tungstated and sulfated zirconia catalysts are very effective in cracking n-C{sub 36} to jet and diesel fuel; these catalysts will be tested for cracking of FT wax. (6) Methane, ethane, and propane are readily decomposed to pure hydrogen and carbon nanotubes using binary Fe-based catalysts containing Mo, Ni, or Pd in a single step non-oxidative reaction. (7) Partial dehydrogenation of liquid hydrocarbons (cyclohexane and methyl cyclohexane) has been performed using catalysts consisting of Pt and other metals on stacked-cone carbon nanotubes. (8) An understanding of the catalytic reaction mechanisms of the catalysts developed in the CFFS C1 program is being achieved by structural characterization using multiple techniques, including XAFS and Moessbauer spectroscopy, XRD, TEM, NMR, ESR, and magnetometry.

Gerald P. Huffman

2003-09-30T23:59:59.000Z

269

Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production  

E-Print Network (OSTI)

#12;Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward

Narasayya, Vivek

270

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

MODIS ASCII Subset Products - FTP Access MODIS ASCII Subset Products - FTP Access All of the MODIS ASCII Subsets are available from the ORNL DAAC's ftp site. The directory structure of the ftp site is based on the abbreviated names for the MODIS Products. Terra MODIS products are abbreviated "MOD", Aqua MODIS products are abbreviated "MYD" and combined Terra and Aqua MODIS products are abbreviated "MCD". The abbreviated names also include the version number (also known as collection). For specific products, please refer to the following table: Product Acronym Spatial Resolution Temporal Frequency Terra V005 SIN Aqua V005 SIN Terra/Aqua Combined V005 SIN Surface Reflectance SREF 500 m 8 day composites MOD09A1 MYD09A1 ---------- Land Surface Temperature and Emissivity TEMP 1 km 8 day composites MOD11A2 MYD11A2 ----------

271

MODIS Land Product Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Validation > MODIS Land Subsets Validation > MODIS Land Subsets MODIS Land Product Subsets Overview Earth, Western Hemisphere The goal of the MODIS Land Product Subsets project is to provide summaries of selected MODIS Land Products for the community to use for validation of models and remote-sensing products and to characterize field sites. Output files contain pixel values of MODIS land products in text format and in GeoTIFF format. In addition, data visualizations (time series plots and grids showing single composite periods) are available. MODIS Land Product Subsets Resources The following MODIS Land Product Subsets resources are maintained by the ORNL DAAC: MODIS Land Products Offered Background Citation Policy Methods and formats MODIS Sinusoidal Grid - Google Earth KMZ Classroom Exercises

272

FCT Hydrogen Production: Basics  

NLE Websites -- All DOE Office Websites (Extended Search)

Basics to someone by E-mail Basics to someone by E-mail Share FCT Hydrogen Production: Basics on Facebook Tweet about FCT Hydrogen Production: Basics on Twitter Bookmark FCT Hydrogen Production: Basics on Google Bookmark FCT Hydrogen Production: Basics on Delicious Rank FCT Hydrogen Production: Basics on Digg Find More places to share FCT Hydrogen Production: Basics on AddThis.com... Home Basics Central Versus Distributed Production Current Technology R&D Activities Quick Links Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis Contacts Basics Photo of hydrogen production in photobioreactor Hydrogen, chemical symbol "H", is the simplest element on earth. An atom of hydrogen has only one proton and one electron. Hydrogen gas is a diatomic

273

Industrial Oil Products Division  

Science Conference Proceedings (OSTI)

A forum for professionals involved in research, development, engineering, marketing, and testing of industrial products and co-products from fats and oils, including fuels, lubricants, coatings, polymers, paints, inks, cosmetics, dielectric fluids, and ad

274

The Product Creation Process  

E-Print Network (OSTI)

The Product Creation Process is described in its context. A phased model is shown, as many organisations use such a model as blueprint. The operational organisation of the product creation process is discussed, especially the role of the operational leader.

Gerrit Muller

1999-01-01T23:59:59.000Z

275

Casthouse Productivity and Safety  

Science Conference Proceedings (OSTI)

Feb 28, 2011 ... Cast Shop for Aluminum Production: Casthouse Productivity and ... performance indicator called Specific Energy Consumption [SEC] ... Improved Monolithic Materials for Lining Aluminum Holding and Melting Furnaces: Andy ...

276

Bio-Based Products  

Energy.gov (U.S. Department of Energy (DOE))

Almost all of the products we currently make from fossil fuels can also be made from biomass. These bioproducts, or bio-based products, are not only made from renewable sources, but they also often...

277

Topic: Product Data  

Science Conference Proceedings (OSTI)

Topic: Product Data. Event. Model-Based Enterprise Summit. TDP Standards Development Summit. Group. Life Cycle Engineering Group. ...

2012-09-19T23:59:59.000Z

278

CERTIFIED FOREST PRODUCTS MARKETS  

E-Print Network (OSTI)

% Sawnwood 13% Panels 9% RW & primary 5% Windows & doors 5% Pulp & paper 5% DIY products 6% Trade & retailers

279

Soy Protein Products  

Science Conference Proceedings (OSTI)

This book will provide an overview of the key benefits of soy protein products in an easily understood format. ...

280

Table 3. Product Applications  

of all hazardous metals, low -level radioactive waste, fission products and transuranics • Macroencapsulation of contaminated debris, metal and ...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

MSID Products, Tools, & Services  

Science Conference Proceedings (OSTI)

SID Products, Tools, & Services. XML Testbed - collection of XML-Related Tools; Express Engine - STEP (ISO 10303) development ...

2013-09-16T23:59:59.000Z

282

IEEE 1588 Products & Implementations  

Science Conference Proceedings (OSTI)

... Facsimile. 100 Bureau Drive, M/S 8220 Gaithersburg, MD 20899-8220. IEEE 1588 Products & Implementations. This page ...

2012-11-06T23:59:59.000Z

283

Seamless Steel Tubular Products  

Science Conference Proceedings (OSTI)

...). The tank also contained the search units.Fig. 6 Seamless and welded austenitic stainless steel tubular products were

284

Strangeness Production at COSY  

E-Print Network (OSTI)

The paper gives an overview of strangeness-production experiments at the Cooler Synchrotron COSY. Results on kaon-pair and phi meson production in pp, pd and dd collisions, hyperon-production experiments and Lambda p final-state interaction studies are presented.

Frank Hinterberger; Hartmut Machner; Regina Siudak

2010-10-08T23:59:59.000Z

285

Coal production 1989  

SciTech Connect

Coal Production 1989 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, reserves, and stocks to a wide audience including Congress, federal and state agencies, the coal industry, and the general public. 7 figs., 43 tabs.

1990-11-29T23:59:59.000Z

286

Refinery Net Production of Total Finished Petroleum Products  

U.S. Energy Information Administration (EIA) Indexed Site

Waxes Petroleum Coke Marketable Petroleum Coke Catalyst Petroleum Coke Asphalt and Road Oil Still Gas Miscellaneous Products Misc. Products - Fuel Use Misc. Products - Nonfuel...

287

Tight Product Balance Pushes Up Product Spread (Spot Product - Crude  

Gasoline and Diesel Fuel Update (EIA)

5 5 Notes: Gasoline inventories indicate how tight the gasoline product market is in any one region. When the gasoline market is tight, it affects the portion of gasoline price is the spread between spot product price and crude oil price. Note that in late 1998-and early 1999 spreads were very small when inventories were quite high. Contrast summers of 1998 or 1999 with summer 2000. Last summer's tight markets, resulting low stocks and transition to Phase 2 RFG added price pressure over and above the already high crude price pressure on gasoline -- particularly in the Midwest. As we ended last winter, gasoline inventories were low, and the spread between spot prices and crude oil were higher than typical as a result. Inventories stayed well below average and the spread during the

288

Coal Production 1992  

SciTech Connect

Coal Production 1992 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, productive capacity, and recoverable reserves to a wide audience including Congress, Federal and State agencies, the coal industry, and the general public. In 1992, there were 3,439 active coal mining operations made up of all mines, preparation plants, and refuse operations. The data in Table 1 cover the 2,746 mines that produced coal, regardless of the amount of production, except for bituminous refuse mines. Tables 2 through 33 include data from the 2,852 mining operations that produced, processed, or prepared 10 thousand or more short tons of coal during the period, except for bituminous refuse, and includes preparation plants with 5 thousand or more employee hours. These mining operations accounted for over 99 percent of total US coal production and represented 83 percent of all US coal mining operations in 1992.

1993-10-29T23:59:59.000Z

289

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

Totals may not equal sum of components because of independent rounding. Source: U.S. Energy Information Administration: Form EIA-851A, "Domestic Uranium Production Report"...

290

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Shaaf, and the FLUXNET validation communities to choose sites and to identify the land products needed for validation. We also worked with MODAPS on subsetting the Land...

291

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Citation When using subsets of MODIS Land Products from the ORNL DAAC, please use the citation: Oak Ridge National Laboratory Distributed Active Archive Center (ORNL DAAC). 2011....

292

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Introduction Introduction The goal of the MODIS Land Product Subsets project is to provide summaries of selected MODIS Land Products for the community to use for validation of models and remote-sensing products, and to characterize field sites. The MODIS Land Product Subsets are derived from MODIS products that were generated with Collection 4 or later algorithms. Please be advised that these products are subject to continual review and revision. The MODIS land product subsets are provided in ASCII and GeoTIFF format. The subsets are stored as individual text(ASCII) files, each file represents one field site and one MODIS product.The ASCII data covers 7x7 km of the field site. These ASCII files contain comma-delimited rows of parameter values (image bands) for each pixel in the selected area. Each row in the file will contain data from one 8-day, 16-day, or annual period (depending on the temporal frequency of the data product represented).

293

Coal Combustion Products: Challenges  

NLE Websites -- All DOE Office Websites (Extended Search)

Products: Challenges and Opportunities American Coal Ash Association Conference St. Petersburg, FL January 27-30, 2003 Carl O. Bauer National Energy Technology Laboratory...

294

CONSOLIDATED CERAMIC PRODUCTS, INC.  

Science Conference Proceedings (OSTI)

For 40 years, Consolidated Ceramic Products, Inc. has been of service to the aluminum industries worldwide. An innovative manufacturer and marketer of ...

295

Hydrology Group - Technologies & Products  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies & Products Systems & Sensors Water Fluxmeter Software & Models Fish Individual-based Numerical Simulator (FINS ) FRAMES 1.x ReActive Flow and Transport of Groundwater...

296

LENNOX HEARTH PRODUCTS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and venting products for the specialty retail, residential new construction and industrial markets. LHP, based in Nashville, TN, is a business unit of Lennox...

297

Organic dairy production.  

E-Print Network (OSTI)

??The aim of this thesis was to gain further knowledge about the performance of cows in organic dairy production and their ability to adapt to… (more)

Ahlman, Therese

2010-01-01T23:59:59.000Z

298

Coalbed Methane Production  

Gasoline and Diesel Fuel Update (EIA)

Methane Production (Billion Cubic Feet) Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes 2006 2007 2008 2009...

299

PRODUCTION AND DECAY OF  

NLE Websites -- All DOE Office Websites (Extended Search)

experimental observa- tion of CP violation, we briefly update the results on b quark production and lifetimes. Since this edition features separate reviews on the determination of...

300

Electromagnetic Higgs production  

E-Print Network (OSTI)

The cross section for central diffractive Higgs production is calculated, for the LHC range of energies. The graphs for the possible mechanisms for Higgs production, through pomeron fusion and photon fusions are calculated for all possibilities allowed by the standard model. The cross section for central diffractive Higgs production through pomeron fusion, must be multiplied by a factor for the survival probability, to isolate the Higgs signal and reduce the background. Due to the small value of the survival probability $\\Lb 4 \\times 10^{-3}\\Rb $, the cross sections for central diffractive Higgs production, in the two cases for pomeron fusion and photon fusion, are competitive.

J. S. Miller

2007-04-16T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

NGPL Production, Gaseous Equivalent  

U.S. Energy Information Administration (EIA) Indexed Site

NGPL Production, Gaseous Equivalent Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By:...

302

Weekly Blender Net Production  

Gasoline and Diesel Fuel Update (EIA)

Production (Thousand Barrels per Day) Period: Weekly 4-Week Average Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes...

303

Microsystem Product Development  

E-Print Network (OSTI)

Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product development entails the maturation of the design and all the processes needed to successfully produce a product. Elements such as tooling design, fixtures, gages, testers, inspection, work instructions, process planning, etc., are often overlooked as MEMS engineers concentrate on design, fabrication and packaging processes. Thorough, up-front planning of product development efforts is crucial to the success of any project.

Polosky, M -A

2007-01-01T23:59:59.000Z

304

Product Pipeline Reports Tutorial  

Gasoline and Diesel Fuel Update (EIA)

Home > Petroleum > Petroleum Survey Forms> Petroleum Survey Forms Tutorial Product Pipeline Reports Tutorial Content on this page requires a newer version of Adobe Flash Player....

305

Sustainable hydrogen production  

SciTech Connect

This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

Block, D.L.; Linkous, C.; Muradov, N.

1996-01-01T23:59:59.000Z

306

Natural Gas Production  

U.S. Energy Information Administration (EIA)

Natural Gas Production. Measured By. Disseminated Through. Survey of Producing States and Mineral Management Service “Evolving Estimate” in Natural Gas Monthly.

307

Products, Services: Not Procurable  

NLE Websites -- All DOE Office Websites (Extended Search)

Products, Services: Not Procurable As a premier national research and development laboratory, LANL seeks to do business with qualified companies that offer value and high...

308

Venezuela Gasoline Production & Demand  

U.S. Energy Information Administration (EIA)

... Change and Uncertainty Today’s gasoline imports essential to meet ... Refinery-based MTBE production and some merchant MTBE facilities will be ...

309

Furfuryl alcohol cellular product  

DOE Patents (OSTI)

Self-extinguishing rigid foam products are formed by polymerization of furfuryl alcohol in the presence of a lightweight, particulate, filler, zinc chloride and selected catalysts.

Sugama, T.; Kukacka, L.E.

1982-05-26T23:59:59.000Z

310

MESA PRODUCTS, INC. PROFILE  

Science Conference Proceedings (OSTI)

... services and products are energy related companies ... programs including the annual Appalachian Underground ... term and short-term outlook of the ...

2007-04-04T23:59:59.000Z

311

Net Primary Productivity Methods  

NLE Websites -- All DOE Office Websites (Extended Search)

some scientists still tend to confuse productivity with standing biomass or standing crop. NPP is a fundamental ecological variable, not only because it measures the energy...

312

Production Methodologies and Uncertainties  

NLE Websites -- All DOE Office Websites (Extended Search)

from the calcination process for clinker production direct emissions from fossil fuel combustion and indirect emissions from electricity consumption This paper examines in...

313

State Energy Production Data  

Gasoline and Diesel Fuel Update (EIA)

State Energy Data System State Energy Data System Production Estimates Technical Notes For 1960-2011 Estimates Table of Contents Section 1. Introduction ................................................................................................................... 1 Section 2. Coal ............................................................................................................................... 5 Section 3. Crude Oil ....................................................................................................................... 7 Section 4. Natural Gas (Marketed Production) .............................................................................. 9 Section 5. Renewable Energy and Nuclear Energy ..................................................................... 13

314

Production reactor characteristics  

SciTech Connect

Reactors for the production of special nuclear materials share many similarities with commercial nuclear power plants. Each relies on nuclear fission, uses uranium fuel, and produces large quantities of thermal power. However, there are some important differences in production reactor characteristics that may best be discussed in terms of mission, role, and technology.

Thiessen, C.W.; Hootman, H.E.

1990-01-01T23:59:59.000Z

315

MTEACH: Didactic Multimedia Production  

Science Conference Proceedings (OSTI)

Multimedia production is generally considered to be an expensive task. This is true when dealing with complex graphics, animation, artistic effects, music and high quality video editing, but didactic applications do not require such advanced features. ... Keywords: Didactic, language-based multimedia production, automatic links generation, microneurosurgery

Pier Luca Montessoro; Stefano Caschi

1999-06-01T23:59:59.000Z

316

Jet production at HERA  

E-Print Network (OSTI)

Recent results from jet production in deep inelastic ep scattering to investigate parton dynamics at low x are reviewed. The results on jet production in deep inelastic scattering and photoproduction used to test perturbative QCD are discussed and the values of alphas(Mz) extracted from a QCD analysis of the data are presented

C. Glasman

2004-10-07T23:59:59.000Z

317

By-Products Utilization  

E-Print Network (OSTI)

Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST CONCRETE PRODUCTS Authors: Tarun R. Naik, Director investigation. Two additional ash samples were prepared by blending these selected conventional and clean coal

Wisconsin-Milwaukee, University of

318

Tools and Products  

Science Conference Proceedings (OSTI)

A look at new products on the market, including the BOXX Technologies' Apexx 4 Super-Workstation and renderBOXX Classic 7500, Dimension 3D Printers from Tekpro Group, Micronas' VCT-Premium single-chip flat panel TV processors, Cyberware Head and Face ... Keywords: graphics tools, graphics products

Carl Machover; David J. Kasik

2007-11-01T23:59:59.000Z

319

Production of Recycled Lead  

Science Conference Proceedings (OSTI)

...production of lead from recycled and mined (primary) sources for 1980 to 1988. At present, just under half of the total world lead production of 4.3 million metric tons (4.7 million tons) comes from recycling of scrap materials. As indicated in Table 4, there has been very little change in recent...

320

Gulf Coast Distillate Production  

Gasoline and Diesel Fuel Update (EIA)

4 of 15 4 of 15 Notes: PADD 3 is a major source of supply for the East Coast. This graph shows how during the winter of 1997-1998 when distillate stocks were very high, production fell back. In contrast, we entered the winter of 1996-1997 with very low stocks, and refineries reached record production levels as they tried to build stocks late in the season. Notice that production is normally reduced in January as distillate stocks are used to meet demand and as refineries begin maintenance and turnovers, which continue into February. This January is no different. There is room for some production increases in January and February, if refineries postpone maintenance. But postponing maintenance and turnarounds can create problems when the gasoline production season begins in March and April.

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Charm Production at RHIC  

E-Print Network (OSTI)

The latest results for open charm and $J/\\psi$ production in p-p, d-Au and Au-Au from the PHENIX and STAR experiments at $\\sqrt{s_{NN}}=200$ GeV at RHIC are presented. The preliminary data show open charm production follows binary scaling in d-Au and Au-Au collisions at RHIC. In d-Au collisions, a suppression in $J/\\psi$ production has been observed at the forward rapidity (d direction), at the backward rapidity (Au direction), $J/\\psi$ production seems strongly dependent on collisions centrality. The implications of heavy flavor production in cold (d-Au) and hot (Au-Au) nuclear media at RHIC are discussed.

Ming Xiong Liu

2004-05-28T23:59:59.000Z

322

FCT Hydrogen Production: Hydrogen Production R&D Activities  

NLE Websites -- All DOE Office Websites (Extended Search)

Hydrogen Production R&D Hydrogen Production R&D Activities to someone by E-mail Share FCT Hydrogen Production: Hydrogen Production R&D Activities on Facebook Tweet about FCT Hydrogen Production: Hydrogen Production R&D Activities on Twitter Bookmark FCT Hydrogen Production: Hydrogen Production R&D Activities on Google Bookmark FCT Hydrogen Production: Hydrogen Production R&D Activities on Delicious Rank FCT Hydrogen Production: Hydrogen Production R&D Activities on Digg Find More places to share FCT Hydrogen Production: Hydrogen Production R&D Activities on AddThis.com... Home Basics Current Technology R&D Activities Quick Links Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis Contacts

323

Coal combustion products (CCPs  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

combustion products (CCPs) combustion products (CCPs) are solid materials produced when coal is burned to generate electricity. Since coal provides the largest segment of U.S. electricity generation (45 percent in 2010), finding a sustainable solution for CCPs is an important environmental challenge. When properly managed, CCPs offer society environmental and economic benefits without harm to public health and safety. Research supported by the U.S. Department of Energy's (DOE) Office of Fossil Energy (FE) has made an important contribution in this regard. Fossil Energy Research Benefits Coal Combustion Products Fossil Energy Research Benefits

324

Monthly Biodiesel Production Report  

U.S. Energy Information Administration (EIA) Indexed Site

Monthly Biodiesel Production Monthly Biodiesel Production Report November 2013 With Data for September 2013 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Monthly Biodiesel Production Report This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this report therefore should not be construed as representing those of the Department of Energy or

325

JGI - Product Offerings  

NLE Websites -- All DOE Office Websites (Extended Search)

Product Offerings Product Offerings Scientific Program Product Brief Description Deliverables FY14 target cycle time (median), days FY14 target cycle time (75th %), days Fungal Minimal Draft Low coverage whole genome shotgun sequencing for evaluation. May turn into a standard draft or improved standard draft. Assembly. Annotation optional (JGI portal); raw data submitted to SRA 250 400 Fungal Resequencing SNP and short indel calls, rearrangement detection, population analysis. Text file of SNPs (incl location in genome, coding/vs non, syn vs non-syn aa change etc) and structural rearrangements, alignment files, tracks for upload to genome browser and fastq files; raw data submitted to SRA 140 200 Fungal Standard Draft Whole genome shotgun sequencing. Exact scope items and quality of finished product depend on genome. Selected genomes will be improved based on feasibility and scientific merit. Assembly, annotation (JGI Portal + Genbank); raw data submitted to SRA 250 400

326

Net Primary Production  

NLE Websites -- All DOE Office Websites (Extended Search)

8 study sites, plus a worldwide data set, have been added to the global terrestrial Net Primary Production (NPP) reference database. The NPP database has been compiled by Dick...

327

Product Family Glossary  

E-Print Network (OSTI)

Printed on Recycled PaperIMPORTANT NOTICE Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. TI warrants performance of its semiconductor products and related software to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except those mandated by government requirements. Certain applications using semiconductor products may involve potential risks of death, personal injury, or severe property or environmental damage (“Critical Applications”).

Sprua Glossary; Tms Dsp; Literature Number Sprua

1998-01-01T23:59:59.000Z

328

EIA Drilling Productivity Report  

U.S. Energy Information Administration (EIA) Indexed Site

Drilling Productivity Report Drilling Productivity Report For Center on Global Energy Policy, Columbia University October 29, 2013 | New York, NY By Adam Sieminski, Administrator The U.S. has experienced a rapid increase in natural gas and oil production from shale and other tight resources Adam Sieminski, EIA Drilling Productivity Report October 29, 2013 2 0 5 10 15 20 25 30 35 2000 2002 2004 2006 2008 2010 2012 Rest of US Marcellus (PA and WV) Haynesville (LA and TX) Eagle Ford (TX) Bakken (ND) Woodford (OK) Fayetteville (AR) Barnett (TX) Antrim (MI, IN, and OH) 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 2000 2002 2004 2006 2008 2010 2012 Eagle Ford (TX) Bakken (MT & ND) Granite Wash (OK & TX) Bonespring (TX Permian) Wolfcamp (TX Permian) Spraberry (TX Permian) Niobrara-Codell (CO) Woodford (OK)

329

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Introduction Introduction Collection 5 The MODIS data from the Terra and Aqua satellites are being reprocessed using revised algorithms beginning in September 2006. This new set of MODIS Products is called Collection 5. To view the product changes that took place in going from Collection 4 to Collection 5, please visit the following Web site: http://landweb.nascom.nasa.gov/cgi-bin/QA_WWW/newPage.cgi?fileName=MODLAND_C005_changes The ORNL DAAC provides subsets of the Collection 5 MODIS Land Products. Investigators from around the world have shown a great deal of interest in this activity, asking that over 1000 field and flux tower sites be included in Collection 5 subsetting (up from 280 sites for Collection 4 MODIS subsetting). Availability of the Collection 5 Data Products

330

production | OpenEI  

Open Energy Info (EERE)

production production Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 1, and contains only the reference case. The dataset uses quadrillion BTUs, and quantifies the energy prices using U.S. dollars. The data is broken down into total production, imports, exports, consumption, and prices for energy types. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords 2011 AEO consumption EIA export import production reference case total energy Data application/vnd.ms-excel icon AEO2011: Total Energy Supply, Disposition, and Price Summary - Reference Case (xls, 112.8 KiB) Quality Metrics Level of Review Peer Reviewed

331

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Data for Selected Field Sites (n=1147) Data for Selected Field Sites (n=1147) Obtain MODIS data for areas centered on selected field sites or flux towers from around the world. The goal of the MODIS Subsets for Selected Field Sites is to prepare summaries of selected MODIS Land Products for the community to use for validation of models and remote sensing products and to characterize field sites. Search for data: By Site from a Map Server from Google Earth (Install Google Earth) From FTP site (ASCII) Methods Data products were first subsetted from one or more 1200x1200-km MODIS tiles to 25 x 25-km arrays by the MODIS Science Data Support Team (MODAPS). These products were further subsetted (7x7) and reformatted from their native HDF-EOS to ASCII using version 2.2 of the MODIS Reprojection Tool (MRT) in combination with code developed at the ORNL DAAC.

332

Domestic Uranium Production Report  

Annual Energy Outlook 2012 (EIA)

6. Employment in the U.S. uranium production industry by category, 2003-2012 person-years Year Exploration Mining Milling Processing Reclamation Total 2003 W W W W 117 321 2004 18...

333

Offshore Development and Production  

Reports and Publications (EIA)

Natural gas production in the Federal offshore has increased substantially in recent years, gaining more than400 billion cubic feet between 1993 and 1997 to a level of 5.14 trillion cubic feet.

Information Center

1999-04-01T23:59:59.000Z

334

Natural Gas Production,  

Gasoline and Diesel Fuel Update (EIA)

Natural Gas Production, Transmission, and Consumption by State, 1996 (Million Cubic Feet) Table Alabama ... 530,841 5,361 -35,808 -163,227 0 921 18 325,542...

335

Coal production: 1980  

Science Conference Proceedings (OSTI)

US coal production and related data are reported for the year 1980, with similar data for 1979 given for comparison. The data here collected on Form EIA-7A, coal production report, from 3969 US mines that produced, processed, or prepared 10,000 or more short tons of coal in 1980. Among the items covered are production, prices, employment, productivity, stocks, and recoverable reserves. Data are reported by state, county, coal producing district, type of mining, and by type of coal (anthracite, bituminous, subbituminous, and lignite). Also included are a glossary of coal terms used, a map of the coal producing disricts, and form EIA-7A with instructions. 14 figures, 63 tables.

Not Available

1982-05-01T23:59:59.000Z

336

Particle Data Group - Products  

NLE Websites -- All DOE Office Websites (Extended Search)

One Cyclotron Road Berkeley, CA 94720-8166 USA In Europe, Africa, Middle East, India, Pakistan, Russia and all other countries: Via Email: pdg-products@cern.ch Via postal mail:...

337

Propane Production by Source  

Gasoline and Diesel Fuel Update (EIA)

4 Notes: So where do we get our supplies of propane? Well, propane comes from both gas plants and refineries. Here we see data through May which shows that production at both gas...

338

Radioactivity in consumer products  

SciTech Connect

Papers presented at the conference dealt with regulations and standards; general and biological risks; radioluminous materials; mining, agricultural, and construction materials containing radioactivity; and various products containing radioactive sources.

Moghissi, A.A.; Paras, P.; Carter, M.W.; Barker, R.F. (eds.)

1978-08-01T23:59:59.000Z

339

PRODUCTION OF TRITIUM  

DOE Patents (OSTI)

This invention relates to a process for the production of tritium by subjecting comminuted solid lithium fluoride containing the lithium isotope of atomic mass number 6 to neutron radiation in a self-sustaining neutronic reactor. The lithium fiuoride is heated to above 450 deg C. in an evacuated vacuum-tight container during radiation. Gaseous radiation products are withdrawn and passed through a palladium barrier to recover tritium. (AEC)

Jenks, G.H.; Shapiro, E.M.; Elliott, N.; Cannon, C.V.

1963-02-26T23:59:59.000Z

340

Ethanol production from lignocellulose  

DOE Patents (OSTI)

This invention presents a method of improving enzymatic degradation of lignocellulose, as in the production of ethanol from lignocellulosic material, through the use of ultrasonic treatment. The invention shows that ultrasonic treatment reduces cellulase requirements by 1/3 to 1/2. With the cost of enzymes being a major problem in the cost-effective production of ethanol from lignocellulosic material, this invention presents a significant improvement over presently available methods.

Ingram, Lonnie O. (Gainesville, FL); Wood, Brent E. (Gainesville, FL)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Particle production at HERA  

E-Print Network (OSTI)

H1 has measured a number of different known particles and compared their production to QCD models and to other reactions such as N-N collisions. ZEUS has also measured the production of K0SK0S pairs with a view to searching for glueballs. Several resonances are seen which are glueball candidates. The results on the masses and widths are compared to other experiments.

Changyi Zhou

2009-05-30T23:59:59.000Z

342

Grid-based Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Grid-based Production Grid-based Production Grid-based Production PDSF is a Tier 2 site for ALICE and as such has the infrastructure in place to run automated grid-based ALICE production jobs. The main components of this infrastructure are listed below. Grid-Enabled Storage Elements There are currently a set of 10 servers running XRootD with a total capacity of 720TB. Included in XRootD are the data transfer tools used to transfer the input and output files for the production jobs running at PDSF. In addition to the 10 servers there is also the XRootD redirector which is currently running on pc1801.nersc.gov (pdsf5.nersc.gov). VO Box A VO (Virtual Organization) box is a dedicated node (palicevo1.nersc.gov) that coordinates the production. It runs the grid-monitoring tool MonALISA, the AliEn grid framework software, a Condor-G client and does job

343

ARM - PI Product - Raman lidar/AERI PBL Height Product  

NLE Websites -- All DOE Office Websites (Extended Search)

ProductsRaman lidarAERI PBL Height Product Comments? We would love to hear from you Send us a note below or call us at 1-888-ARM-DATA. Send PI Product : Raman lidarAERI PBL...

344

Case-study of a coal gasification-based energy supply system for China  

E-Print Network (OSTI)

for biogas or DME, so we assumed the same values for biogas as for coke oven gas (i.e., town gas coal, washed coal and coke, 75 % for petroleum products and town gas, and 90 % for heat. We also synthesis gas and elec- tricity, high-value-added chemicals, high-value-added fu- els for vehicles

345

Utah Percent of Historical Oil Well Production (BOE) by Production ...  

U.S. Energy Information Administration (EIA)

Utah Percent of Historical Oil Well Production (BOE) by Production Rate Bracket. Energy Information Administration (U.S. Dept. of Energy)

346

Ohio Percent of Historical Gas Well Production (BOE) by Production ...  

U.S. Energy Information Administration (EIA)

Ohio Percent of Historical Gas Well Production (BOE) by Production Rate Bracket. Energy Information Administration (U.S. Dept. of Energy)

347

TOYOTA PRODUCTION SYSTEMTOYOTA PRODUCTION SYSTEM ( TPS ) 1930( TPS ) 1930s  

E-Print Network (OSTI)

Why Leany #12;// ? ? ?? ?? #12;#12;TOYOTA PRODUCTION SYSTEMTOYOTA PRODUCTION SYSTEM. 80 : (Standard Work- CPG) 2 Toyota2. Toyota // waste value 3. (time, human effort

Laksanacharoen, Sathaporn

348

Ohio Percent of Historical Oil Well Production (BOE) by Production ...  

U.S. Energy Information Administration (EIA)

Ohio Percent of Historical Oil Well Production (BOE) by Production Rate Bracket. Energy Information Administration (U.S. Dept. of Energy)

349

Technology's Impact on Production  

SciTech Connect

As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

Rachel Amann; Ellis Deweese; Deborah Shipman

2009-06-30T23:59:59.000Z

350

Technology's Impact on Production  

Science Conference Proceedings (OSTI)

As part of a cooperative agreement with the United States Department of Energy (DOE) ?? entitled Technology’s Impact on Production: Developing Environmental Solutions at the State and National Level ? ? the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies ??Regulating Change, is the result of research performed for Tasks 2 and 3.

Amann, Rachel; Deweese, Ellis; Shipman, Deborah

2009-06-30T23:59:59.000Z

351

Design of product development systems  

E-Print Network (OSTI)

The development of successful new products in less time and using fewer resources is key to the financial success of most consumer product companies. In this thesis we have studied the development of new products and how ...

Aguirre Granados, Adrian

2008-01-01T23:59:59.000Z

352

IMPROVED BIOREFINERY FOR THE PRODUCTION OF ETHANOL, CHEMICALS, ANIMAL FEED AND BIOMATERIALS FROM SUGAR CANE  

DOE Green Energy (OSTI)

The Audubon Sugar Institute (ASI) of Louisiana State University’s Agricultural Center (LSU AgCenter) and MBI International (MBI) sought to develop technologies that will lead to the development of a sugar-cane biorefinery, capable of supplying fuel ethanol from bagasse. Technology development focused on the conversion of bagasse, cane-leaf matter (CLM) and molasses into high value-added products that included ethanol, specialty chemicals, biomaterials and animal feed; i.e. a sugar cane-based biorefinery. The key to lignocellulosic biomass utilization is an economically feasible method (pretreatment) for separating the cellulose and the hemicellulose from the physical protection provided by lignin. An effective pretreatment disrupts physical barriers, cellulose crystallinity, and the association of lignin and hemicellulose with cellulose so that hydrolytic enzymes can access the biomass macrostructure (Teymouri et al. 2004, Laureano-Perez, 2005). We chose to focus on alkaline pretreatment methods for, and in particular, the Ammonia Fiber Expansion (AFEX) process owned by MBI. During the first two years of this program a laboratory process was established for the pretreatment of bagasse and CLM using the AFEX process. There was significant improvement of both rate and yield of glucose and xylose upon enzymatic hydrolysis of AFEX-treated bagasse and CLM compared with untreated material. Because of reactor size limitation, several other alkaline pretreatment methods were also co-investigated. They included, dilute ammonia, lime and hydroxy-hypochlorite treatments. Scale-up focused on using a dilute ammonia process as a substitute for AFEX, allowing development at a larger scale. The pretreatment of bagasse by an ammonia process, followed by saccharification and fermentation produced ethanol from bagasse. Simultaneous saccharification and fermentation (SSF) allowed two operations in the same vessel. The addition of sugarcane molasses to the hydrolysate/fermentation process yielded improvements beyond what was expected solely from the addition of sugar. In order to expand the economic potential for building a biorefinery, the conversion of enzyme hydrolysates of AFEX-treated bagasse to succinic acid was also investigated. This program established a solid basis for pre-treatment of bagasse in a manner that is feasible for producing ethanol at raw sugar mills.

Dr. Donal F. Day

2009-01-29T23:59:59.000Z

353

MTBE Production Economics  

Gasoline and Diesel Fuel Update (EIA)

MTBE Production MTBE Production Economics Tancred C. M. Lidderdale Contents 1. Summary 2. MTBE Production Costs 3. Relationship between price of MTBE and Reformulated Gasoline 4. Influence of Natural Gas Prices on the Gasoline Market 5. Regression Results 6. Data Sources 7. End Notes 1. Summary Last year the price of MTBE (methyl tertiary butyl ether) increased dramatically on two occasions (Figure 1) (see Data Sources at end of article.): 1. Between April and June 2000, the price (U.S. Gulf Coast waterborne market) of MTBE rose from $1.00 per gallon to over $1.60 per gallon. This represented an increase in the price premium for MTBE over the wholesale price of conventional gasoline from its normal (1995 though 2000 average) $0.26 per gallon to $0.60 per gallon. The MTBE

354

NREL: Learning - Hydrogen Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Production Production The simplest and most common element, hydrogen is all around us, but always as a compound with other elements. To make it usable in fuel cells or otherwise provide energy, we must expend energy or modify another energy source to extract it from the fossil fuel, biomass, water, or other compound in which it is found. Nearly all hydrogen production in the United States today is by steam reformation of natural gas. This, however, releases carbon dioxide in the process and trades one relatively clean fuel for another, with associated energy loss, so it does little to meet national energy needs. Hydrogen can also be produced by electrolysis-passing an electrical current through water to break it into hydrogen and oxygen-but electrolysis is inefficient and is only as clean

355

PRODUCTION OF PURIFIED URANIUM  

DOE Patents (OSTI)

A pyrometallurgical method for processing nuclear reactor fuel elements containing uranium and fission products and for reducing uranium compound; to metallic uranium is reported. If the material proccssed is essentially metallic uranium, it is dissolved in zinc, the sulution is cooled to crystallize UZn/sub 9/ , and the UZn/sub 9/ is distilled to obtain uranium free of fission products. If the material processed is a uranium compound, the sollvent is an alloy of zinc and magnesium and the remaining steps are the same.

Burris, L. Jr.; Knighton, J.B.; Feder, H.M.

1960-01-26T23:59:59.000Z

356

Gas production apparatus  

DOE Patents (OSTI)

This invention relates generally to the production of gases, and more particularly to the production of tritium gas in a reliable long operating lifetime systems that employs solid lithium to overcome the heretofore known problems of material compatibility and corrosion, etc., with liquid metals. The solid lithium is irradiated by neutrons inside low activity means containing a positive (+) pressure gas stream for removing and separating the tritium from the solid lithium, and these means are contained in a low activity shell containing a thermal insulator and a neutron moderator.

Winsche, Warren E. (Bellport, NY); Miles, Francis T. (Bellport, NY); Powell, James R. (Wading River, NY)

1976-01-01T23:59:59.000Z

357

SEDS: State Energy Production Estimates  

U.S. Energy Information Administration (EIA)

Exploration and reserves, storage, imports and exports, production, prices, sales. Electricity. ... Production. by state and for the United States; by energy source;

358

emerging technologies for metals production  

Science Conference Proceedings (OSTI)

Economics of Production of Primary Titanium by Electrolytic Winning [pp. 13-41] ... A Process for Continuous Titanium Production from Titanium Oxide [pp. 79-88

359

Production analysis of Marcellus Shale.  

E-Print Network (OSTI)

??The purpose of this thesis was to analyze the production potential of Marcellus shale using actual field data. By using real field production data for… (more)

Belyadi, Hossein.

2011-01-01T23:59:59.000Z

360

Cumulative Crude Production Additions (Annual)  

U.S. Energy Information Administration (EIA)

This graph shows the cumulative growth of the Atlantic Basin light sweet crude oil production relative to the growth in crude oil production from the rest of the ...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Covered Product Categories (Fact Sheet)  

SciTech Connect

Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program and its designated product category list.

Not Available

2011-08-01T23:59:59.000Z

362

Energy and Biomedical / Primary Production  

Science Conference Proceedings (OSTI)

Mar 15, 2012 ... The distillation product by vacuum distillation process produced a high purity metal magnesium product, it can be deduced that reversion ...

363

Universal Product Design: Transforming User Activity Into Product Function  

E-Print Network (OSTI)

Many people have disabilities and would like to have all of the amenities typical of daily life. Universal product design is important in designing for the disabled and creating user-friendly products for all people. The goal of this thesis is to develop a universal product method by understanding how user activity closely resembles product function. The research results include a twenty product pair study in which a universal and typical product were compared. An activity diagram and functional model for each product in the product pair were the design tools used for this comparison. User activities were used to cluster product function changes. In addition, design changes such as functional, morphological and parametric were identified between the universal and typical product. The result was an action-function diagram showing the clusters and design changes for all of the twenty product pairs. An interactive GUI universal product design repository detailing the information from the action-function diagrams was created and used for eventual modification of typical products to make them universal. A universal product family was created using a user-centric universal design method developed because of the universal product design repository. Furthermore, user disability ratings from the ICF helped to expand the database and make creation of a universal product family more focused on levels of disability. The useful application of the research will be in developing a universal design method for product designers and engineers. This method will be broken down into a design structure matrix representation of functions from a universal product family of household kitchen appliances. In addition, an embodied concept for a product family consisting of existing accessible dispensers will be used to validate the universal design method developed from the twenty product study. Both case studies will serve as an example of how to extend universal design principles to a wide range of consumer product categories.

Kostovich, Vincent

2009-12-01T23:59:59.000Z

364

Table 1. U.S. Biodiesel Production Capacity and Production  

U.S. Energy Information Administration (EIA) Indexed Site

Biodiesel Production Capacity and Production Biodiesel Production Capacity and Production (million gallons) Period 2011 January 2,114 35 February 2,104 40 March 2,081 60 April 2,101 71 May 2,064 77 June 2,069 81

365

Weekly Coal Production by State  

U.S. Energy Information Administration (EIA) Indexed Site

Weekly Coal Production Weekly Coal Production Data for week ended: December 14, 2013 | Release date: December 19, 2013 | Next release date: December 30, 2013 For the week ended December 14, 2013: U.S. coal production totaled approximately 18.9 million short tons (mmst) This production estimate is 3.1% higher than last week's estimate and 2.9% lower than the production estimate in the comparable week in 2012 Coal production east of the Mississippi River totaled 8.2 mmst Coal production west of the Mississippi River totaled 10.8 mmst U.S. year-to-date coal production totaled 957.1 mmst, 1.9% lower than the comparable year-to-date coal production in 2012 EIA revises its weekly estimates of state-level coal production using Mine Safety and Health Administration (MSHA) quarterly coal production data.

366

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentations Presentations Web and Web Services based tool that provides Subsets and Visualization of MODIS land products to facilitate land validation and field site characterization. S.K. Santhana Vannan; R. B. Cook; B. E. Wilson. AGU Fall Meeting, San Francisco, CA, December 14-18 2009 MODIS Land Product Subsets,S.K. Santhana Vannan; R. B. Cook. November, 2009 MODIS Web Service, S.K. Santhana Vannan. ORNL DAAC UWG Meeting, May 2009 Subsetting Tools for MODIS Land Products: Time-series data for field sites, R. B. Cook, S. M. Margle, S. K. Santhana Vannan, S. K. Holladay, and T. W. Beaty. Global Vegetation Workshop, Missoula MT, August 8-10, 2006 MODIS ASCII Subsets, R. B. Cook. May 2006 Subsets of Remote Sensing Products for AmeriFlux Sites: MODIS ASCII Subsets, AmeriFlux Annual Meeting, R. B. Cook, S. M. Margle, S. K. Holladay, F. A. Heinsch, and C. B. Schaaf. October 5-7, 2004, Boulder, Colorado

367

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

2. U.S. uranium mine production and number of mines and sources, 2003-2012 2. U.S. uranium mine production and number of mines and sources, 2003-2012 Production / Mining Method 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Underground (estimated contained thousand pounds U3O8) W W W W W W W W W W Open Pit (estimated contained thousand pounds U3O8) 0 0 0 0 0 0 0 0 0 0 In-Situ Leaching (thousand pounds U3O8) W W 2,681 4,259 W W W W W W Other1 (thousand pounds U3O8) W W W W W W W W W W Total Mine Production (thousand pounds U3O8) E2,200 2,452 3,045 4,692 4,541 3,879 4,145 4,237 4,114 4,335 Number of Operating Mines Underground 1 2 4 5 6 10 14 4 5 6 Open Pit 0 0 0 0 0 0 0 0 0 0 In-Situ Leaching 2 3 4 5 5 6 4 4 5 5 Other Sources1 1 1 2 1 1 1 2 1 1 1

368

Inclusive neutral particle production  

SciTech Connect

Results of recent inclusive neutral particle production experiments are compared to existing experimental results. These experiments range from 15 to 2000 GeV/c in laboratory beam momentum and use $pi$$sup -$, $pi$$sup +$, p and anti p beams. (auth)

Kahn, S.

1975-01-01T23:59:59.000Z

369

By-Products Utilization  

E-Print Network (OSTI)

was produced by Wisconsin Electric's coal-fired power plants. The criteria for selecting these mixtures was to utilize minimal cost materials, such as coal combustion by-products (fly ash, bottom ash, etc of sufficient strength to withstand handling, transfer and long term exposure. The final phase (4) was designed

Wisconsin-Milwaukee, University of

370

By-Products Utilization  

E-Print Network (OSTI)

on Management & Use of Coal Combustion Products (CCPs), Tampa, Florida, Jan. 27-30, 2003. Department of Civil-Milwaukee, P.O. Box 784, Milwaukee, WI 53201 d Project Manager, Illinois Clean Coal Institute * Director UWM concrete mixtures can be made with up to blends of 20% ponded-ash and 5% Class F fly ash. #12;Introduction

Wisconsin-Milwaukee, University of

371

By-Products Utilization  

E-Print Network (OSTI)

investigation. Two additional ash samples were prepared by blending these selected conventional and clean coalCenter for By-Products Utilization HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R #12;1 HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R. Naik, Shiw S. Singh, and Bruce

Wisconsin-Milwaukee, University of

372

By-Products Utilization  

E-Print Network (OSTI)

Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST by blending these selected conventional and clean coal ashes. Using these sixdifferent ash samples, eleven of 0 and60 percent by high-sulfurcoal ashes (Class F and clean-coal ashes) andcoal ash blends (Class F

Wisconsin-Milwaukee, University of

373

By-Products Utilization  

E-Print Network (OSTI)

-lime fly ash in blended cements with minimum (less than 20%) portland cement in the blend. Keywords: Fly 232, Fly Ash and Natural Pozzolans. #12;4 INTRODUCTION Coal is the most widely used source of energy ash. In 1992, total coal ash production in the world was estimated to be 600 million tons, of which

Wisconsin-Milwaukee, University of

374

By-Products Utilization  

E-Print Network (OSTI)

of Class C fly ash in blended cements with minimum (less than 10 %) portland cement in the blend. Keywords; freezing and thawing durability; strength; sulfate resistance. #12;2 INTRODUCTION Coal is the most widely amounts of coal combustion products (CCPs), which include fly ash, bottom ash, boiler slag, and flue gas

Wisconsin-Milwaukee, University of

375

By-Products Utilization  

E-Print Network (OSTI)

as the coal ash derived from SOx control technology. Up to 80% of CCA was blended with ground portland cement: blended cement, clean coal ash, sulfate resistance, time of setting #12;3 Zichao Wu is Structural EngineerCenter for By-Products Utilization USE OF CLEAN COAL ASH AS SETTING TIME REGULATOR IN PORTLAND

Wisconsin-Milwaukee, University of

376

By-Products Utilization  

E-Print Network (OSTI)

and clean-coal ashes) andcoal ash blends (Class F plus clean-coal ash blends) in the range of 0 to 60Center for By-Products Utilization CHARACTERIZATION AND APPLICATION OF CLASSF FLY ASHCOAL AND CLEAN-COAL,and Bruce W. Ramme CBU-1996-08 REP-283 July 1996 Presented andPublished at the American Coal Ash Association

Wisconsin-Milwaukee, University of

377

By-Products Utilization  

E-Print Network (OSTI)

. Test results indicated that all the blends with coal ash had lower expansion than the control mixtureCenter for By-Products Utilization USE OF CLEAN-COAL ASH FOR MANAGING ASR By Zichao Wu and Tarun R College of Engineering and Applied Science THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;USE OF CLEAN-COAL ASH

Wisconsin-Milwaukee, University of

378

By-Products Utilization  

E-Print Network (OSTI)

mixtures were developed using blends of wood FA and Class C coal FA. Two levels of blended ash of concrete. Blending of wood FA with Class C coal FA improved performance of wood FA to a significant extentCenter for By-Products Utilization GREENER CONCRETE FROM WOOD FLY ASH AND COAL FLY ASH By Tarun R

Wisconsin-Milwaukee, University of

379

PRODUCTION OF URANIUM TETRACHLORIDE  

DOE Patents (OSTI)

A process is descrlbed for the production of uranium tetrachloride by contacting uranlum values such as uranium hexafluoride, uranlum tetrafluoride, or uranium oxides with either aluminum chloride, boron chloride, or sodium alumlnum chloride under substantially anhydrous condltlons at such a temperature and pressure that the chlorldes are maintained in the molten form and until the uranium values are completely converted to uranlum tetrachloride.

Calkins, V.P.

1958-12-16T23:59:59.000Z

380

Selected Vendor Telecommunications Products  

E-Print Network (OSTI)

;APPENDIX A A-2 Product: CellNet Developers: CellNet Data Systems Investors: AT&T Ventures Bank of Boston- held or other mobile receivers. CellNet's fixed wireless radio system consists of a two-way network, operation, and maintenance of the system, paying a fee of roughly $1.00 per meter per month for the basic

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Electrolytic tritium production  

SciTech Connect

This paper reports fifty-three electrolytic cells of various configurations and electrode compositions examined for tritium production. Significant tritium was found in 11 cells at levels between 1.5 and 80 times the starting concentration after enrichment corrections are made.

Storms, E.; Talcott, C. (Los Alamos National Lab., Nuclear Materials Technology Div. and Material Science and Technology Div., MS C348, Los Alamos, NM (US))

1990-07-01T23:59:59.000Z

382

Programs on Product Spaces  

Science Conference Proceedings (OSTI)

We study program states that are described as tuples, i.e., product state spaces. We show how to add program variables and assignment notation to simply typed lambda calculus in order to describe functions, relations and predicate transformers on such ...

Ralph Back; Joakim Wright von

1997-12-01T23:59:59.000Z

383

& CONSUMPTION US HYDROPOWER PRODUCTION  

E-Print Network (OSTI)

12% of the nation's electricity. Hydropower produces more than 90,000 megawatts of electricity, which is enough to meet the needs of 28.3 million consumers. Hydropower accounts for over 90% of all electricity the NAO. ENERGY CONSUMPTION AND PRODUCTION IN NORWAY AND THE NAO The demand for heating oil in Norway

384

Advanced Product Quality Planning (APQP)  

Science Conference Proceedings (OSTI)

...correctly will provide the best opportunity for sustainability once the work cells initiate production....

385

Synthesizing products for online catalogs  

Science Conference Proceedings (OSTI)

A comprehensive product catalog is essential to the success of Product Search engines and shopping sites such as Yahoo! Shopping, Google Product Search, and Bing Shopping. Given the large number of products and the speed at which they are released to ...

Hoa Nguyen; Ariel Fuxman; Stelios Paparizos; Juliana Freire; Rakesh Agrawal

2011-04-01T23:59:59.000Z

386

Codes base on unambiguous products  

Science Conference Proceedings (OSTI)

In this paper, we propose the notion of +-unambiguous product which is expanded from unambiguous product and the definitions of alternative product, alternative code, even alternative code on a pair (X, Y) of languages. Some basic properties of ... Keywords: +-unambiguous product, alt-code, ealt-code, generations of code, independency of conditions

Ho Ngoc Vinh; Vu Thanh Nam; Phan Trung Huy

2010-11-01T23:59:59.000Z

387

BIOTECHNOLOGICALLY RELEVANT ENZYMES AND PROTEINS Cloning, characterization, and engineering of fungal  

E-Print Network (OSTI)

cerevisiae strains for second generation bioethanol: improving xylose fermentation and inhibitor tolerance. Keywords Arabinose fermentation . Xylitol production . Alcohol dehydrogenase . Cofactor specificity of lignocellulosic biomass to value-added products such as bioethanol and xylitol. Saccharomyces cerevisiae

Zhao, Huimin

388

Industrial Oil Products Newsletter April 2013  

Science Conference Proceedings (OSTI)

Read the Industrial Oil Products Newsletter April 2013. Industrial Oil Products Newsletter April 2013 Industrial Oil Products Newsletter April 2013 ...

389

Simulation of Sextet Diquark Production  

E-Print Network (OSTI)

We present a method for simulating the production and decay of particles in the sextet representation of $SU(3)_C$ including the simulation of QCD radiation. First results from the Monte Carlo simulation of sextet diquark production at the LHC including both resonant and pair production are presented. We include limits on resonant diquark production from recent ATLAS results and perform the first simulation studies of the less model dependent pair production mechanism.

Peter Richardson; David Winn

2011-08-31T23:59:59.000Z

390

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Global Subsetting and Visualization Tool Global Subsetting and Visualization Tool The Global Subsetting and Visualization Tool provides customized subsets of MODIS Land products in ASCII format on demand for any location on Earth. Users select a site (either from a picklist or by entering the site's geographic coordinates) and the area surrounding that site, from one pixel up to 201 x 201 km. The tool is expected to take up to 60 minutes to complete the processing, and the tool will send you an email message containing the URL where you can access the output. The tool provides time series plots of the measurement, an ASCII file of the pixel values for the selected product along with quality information, average and standard deviations for the area selected, and a file that can be imported directly into GIS software. In addition we provide a land cover grid (IGBP classification) of the area, along with an estimate of heterogeneity (Shannon richness and evenness).

391

Product Efficiency Cases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

product-efficiency-cases Office of Hearings and product-efficiency-cases Office of Hearings and Appeals 1000 Independence Ave., SW Washington, DC, 20585 202-287-1566 en EXC-13-0004 - In the Matter of Liebherr Canada Ltd. http://energy.gov/oha/downloads/exc-13-0004-matter-liebherr-canada-ltd EXC-13-0004 - In the Matter of Liebherr Canada Ltd.

392

LENNOX HEARTH PRODUCTS  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LENNOX LENNOX HEARTH PRODUCTS April 1, 2011 Mr. Daniel Cohen U.S. Department of Energy Assistant General Council for Legislation, Regulation and Energy Efficiency Office of the General Counsel 1000 Independence Avenue, SW Washington, DC 20585 RE: Regulatory Burden RFI Dear Mr. Cohen: Lennox Hearth Products (LHP) is hereby responding to the Department of Energy's (DOE's) request for information - published at 76 Fed. Reg. 6123 (February 3, 2011) - seeking comment and information to assist the DOE in reviewing its existing regulations to determine whether such regulations should be modified or repealed pursuant to Executive Order 13563 ("Improving Regulation and Regulatory Review," issued by President Obama on January 18, 2011). LHP is a leading manufacturer of indoor and outdoor fireplaces, fireplace inserts, free-standing stoves, gas log

393

Production of MHD fluid  

SciTech Connect

A hot gaseous fluid of low ash content, suitable for use in open-cycle MHD (magnetohydrodynamic) power generation, is produced by means of a three-stage process comprising (1) partial combustion of a fossil fuel to produce a hot gaseous product comprising CO.sub.2 CO, and H.sub.2 O, (2) reformation of the gaseous product from stage (1) by means of a fluidized char bed, whereby CO.sub.2 and H.sub.2 O are converted to CO and H.sub.2, and (3) combustion of CO and H.sub.2 from stage (2) to produce a low ash-content fluid (flue gas) comprising CO.sub.2 and H.sub.2 O and having a temperature of about 4000.degree. to 5000.degree.F.

Lacey, James J. (Library, PA); Kurtzrock, Roy C. (Bethel Park, PA); Bienstock, Daniel (Pittsburgh, PA)

1976-08-24T23:59:59.000Z

394

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

9. Summary production statistics of the U.S. uranium industry, 1993-2012 9. Summary production statistics of the U.S. uranium industry, 1993-2012 Item 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 E2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 Exploration and Development Surface Drilling (million feet) 1.1 0.7 1.3 3.0 4.9 4.6 2.5 1.0 0.7 W W 1.2 1.7 2.7 5.1 5.1 3.7 4.9 6.3 7.2 Drilling Expenditures (million dollars)1 5.7 1.1 2.6 7.2 20.0 18.1 7.9 5.6 2.7 W W 10.6 18.1 40.1 67.5 81.9 35.4 44.6 53.6 66.6 Mine Production of Uranium (million pounds U3O8) 2.1 2.5 3.5 4.7 4.7 4.8 4.5 3.1 2.6 2.4 2.2 2.5 3.0 4.7 4.5 3.9 4.1 4.2 4.1 4.3 Uranium Concentrate Production (million pounds U3O8) 3.1 3.4 6.0 6.3 5.6 4.7 4.6 4.0 2.6 2.3 2.0 2.3 2.7 4.1 4.5 3.9 3.7 4.2 4.0 4.1

395

Joined ceramic product  

DOE Patents (OSTI)

According to the present invention, a joined product is at least two ceramic parts, specifically bi-element carbide parts with a bond joint therebetween, wherein the bond joint has a metal silicon phase. The bi-element carbide refers to compounds of MC, M.sub.2 C, M.sub.4 C and combinations thereof, where M is a first element and C is carbon. The metal silicon phase may be a metal silicon carbide ternary phase, or a metal silicide.

Henager, Jr., Charles W [Kennewick, WA; Brimhall, John L [West Richland, WA

2001-08-21T23:59:59.000Z

396

PRODUCTION OF TRIFLUOROACETIC ACID  

DOE Patents (OSTI)

A method is given for the production of improved yields of trifluoroacetic acid. The compound is prepared by oxidizing m-aminobenzotrifluoride with an alkali metal or alkaline earth metal permanganate at a temperature in the range of 80 deg C to 100 deg C while dissolved ln a mixture of water with glacial acetic acid and/or trifluoroacetic acid. Preferably a mixture of water and trifluoroacetic acid ls used as the solvent.

Haworth, W.N.; Stacey, M.

1949-07-19T23:59:59.000Z

397

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Method Used to Calculate Albedo from the MODIS Albedo Model Parameter Product MCD43A1 Method Used to Calculate Albedo from the MODIS Albedo Model Parameter Product MCD43A1 Albedo MCD43A The ALBEDO data are based on the Terra and Aqua(Combined) MODIS BRDF / Albedo Model Parameter Product (MCD43A1). The primary BRDF model parameters from MCD43A1 are used in the following equations to calculate Black-sky, white-sky, and actual (blue-sky) albedo. We have used a solar zenith angle (szn) equal to local solar noon and an optical depth of 0.2 as default values in calculating these data files. Black-sky Albedo = Parameters_01 + Parameters_02 * (-0.007574 + (-0.070987 * szn2) + (0.307588 * szn3)) + Parameters_03 * (-1.284909 + (-0.166314 * szn2) + (0.041840 * szn3)) White-sky Albedo = Parameters_01 + Parameters_02 * (0.189184) + Parameters_03 * (-1.377622)

398

Weekly Refiner Net Production  

U.S. Energy Information Administration (EIA) Indexed Site

Refiner Net Production Refiner Net Production (Thousand Barrels per Day) Period: Weekly 4-Week Average Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Product/Region 11/08/13 11/15/13 11/22/13 11/29/13 12/06/13 12/13/13 View History Finished Motor Gasoline 2,168 2,300 2,336 2,359 2,462 2,368 2010-2013 East Coast (PADD 1) 54 53 52 67 71 67 2010-2013 Midwest (PADD 2) 696 745 722 711 798 790 2010-2013 Gulf Coast (PADD 3) 891 916 1,010 1,053 1,011 1,021 2010-2013 Rocky Mountain (PADD 4) 260 248 245 232 279 235 2010-2013 West Coast (PADD 5) 268 338 308 296 302 255 2010-2013 Reformulated 50 49 49 49 48 49 2010-2013 Blended with Ethanol 50 49 49 49 48 49 2010-2013 Other

399

Fuel Ethanol Oxygenate Production  

Gasoline and Diesel Fuel Update (EIA)

Product: Fuel Ethanol Methyl Tertiary Butyl Ether Merchant Plants Captive Plants Period-Unit: Monthly-Thousand Barrels Monthly-Thousand Barrels per Day Annual-Thousand Barrels Annual-Thousand Barrels per Day Product: Fuel Ethanol Methyl Tertiary Butyl Ether Merchant Plants Captive Plants Period-Unit: Monthly-Thousand Barrels Monthly-Thousand Barrels per Day Annual-Thousand Barrels Annual-Thousand Barrels per Day Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Product Area May-13 Jun-13 Jul-13 Aug-13 Sep-13 Oct-13 View History U.S. 27,197 26,722 26,923 26,320 25,564 27,995 1981-2013 East Coast (PADD 1) 628 784 836 842 527 636 2004-2013 Midwest (PADD 2) 25,209 24,689 24,786 24,186 23,810 26,040 2004-2013 Gulf Coast (PADD 3) 523 404 487 460 431 473 2004-2013 Rocky Mountain (PADD 4) 450 432 430 432 415 429 2004-2013 West Coast (PADD 5)

400

Advanced Production Planning Models  

SciTech Connect

>This report describes the innovative modeling approach developed as a result of a 3-year Laboratory Directed Research and Development project. The overall goal of this project was to provide an effective suite of solvers for advanced production planning at facilities in the nuclear weapons complex (NWC). We focused our development activities on problems related to operations at the DOE's Pantex Plant. These types of scheduling problems appear in many contexts other than Pantex--both within the NWC (e.g., Neutron Generators) and in other commercial manufacturing settings. We successfully developed an innovative and effective solution strategy for these types of problems. We have tested this approach on actual data from Pantex, and from Org. 14000 (Neutron Generator production). This report focuses on the mathematical representation of the modeling approach and presents three representative studies using Pantex data. Results associated with the Neutron Generator facility will be published in a subsequent SAND report. The approach to task-based scheduling described here represents a significant addition to the literature for large-scale, realistic scheduling problems in a variety of production settings.

JONES,DEAN A.; LAWTON,CRAIG R.; KJELDGAARD,EDWIN A.; WRIGHT,STEPHEN TROY; TURNQUIST,MARK A.; NOZICK,LINDA K.; LIST,GEORGE F.

2000-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Renewable Energy Products LLC | Open Energy Information  

Open Energy Info (EERE)

Products LLC Jump to: navigation, search Name Renewable Energy Products, LLC Place Santa Fe Springs, California Zip 90670 Product Own and operate a biodiesel production facility in...

402

Sunforce Products | Open Energy Information  

Open Energy Info (EERE)

Sunforce Products Sunforce Products Jump to: navigation, search Name Sunforce Products Place Saint-Laurent, Quebec, Canada Zip H4N 2G3 Sector Solar, Wind energy Product Manufacturer and distributor of solar and wind power generation and battery charging products. References Sunforce Products[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Sunforce Products is a company located in Saint-Laurent, Quebec, Canada . References ↑ "Sunforce Products" Retrieved from "http://en.openei.org/w/index.php?title=Sunforce_Products&oldid=351792" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version

403

U.S. Plutonium "Pit" Production: Additional Facilities, Production  

National Nuclear Security Administration (NNSA)

robust technical confidence in U.S. pits and primaries, and these many 7 alternatives to production, and the costs and risks discussed below, further pit production for the...

404

FCT Hydrogen Production: Current Technology  

NLE Websites -- All DOE Office Websites (Extended Search)

Current Technology to Current Technology to someone by E-mail Share FCT Hydrogen Production: Current Technology on Facebook Tweet about FCT Hydrogen Production: Current Technology on Twitter Bookmark FCT Hydrogen Production: Current Technology on Google Bookmark FCT Hydrogen Production: Current Technology on Delicious Rank FCT Hydrogen Production: Current Technology on Digg Find More places to share FCT Hydrogen Production: Current Technology on AddThis.com... Home Basics Current Technology Thermal Processes Electrolytic Processes Photolytic Processes R&D Activities Quick Links Hydrogen Delivery Hydrogen Storage Fuel Cells Technology Validation Manufacturing Codes & Standards Education Systems Analysis Contacts Current Technology The development of clean, sustainable, and cost-competitive hydrogen

405

Dissolver production tests  

SciTech Connect

In order to obtain data for the development and design of the Purex dissolvers and to demonstrate to Manufacturing and Technical personnel the feasibility of increasing the size of dissolver cuts at BiPO{sub 4} and Redox, a dissolver production test program in a BiPO{sub 4} dissolver is requested. These tests are expected to supplement the program already initiated on the 321 Bldg. dissolver, explaining dissolver behavior to the extent that existing dissolvers can be operated under more nearly optimum conditions and that new dissolvers can be designed with accuracy.

Tomlinson, R.E.

1952-08-05T23:59:59.000Z

406

Production Cost Optimization Assessments  

Science Conference Proceedings (OSTI)

The benefits of improved thermal performance of coal-fired power plants continue to grow, as the costs of fuel rise and the prospect of a carbon dioxide cap and trade program looms on the horizon. This report summarizes the efforts to date of utilities committed to reducing their heat rate by 1.0% in the Production Cost Optimization (PCO) Project. The process includes benchmarking of plant thermal performance using existing plant data and a site-specific performance appraisal. The appraisal determines po...

2008-12-11T23:59:59.000Z

407

PRODUCTION OF FLUOROCARBONS  

DOE Patents (OSTI)

This patent pertains to a process for recovering fluorocarbons from a liquid mixture of hydrocarbons with partially and completely fluorinated products thereof. It consists of contacting the mxture in the cold with a liquid which is a solvent for the hydrocarbons and which is a nonsolvent for the fluorocarbons, extracting the hydrocarbons, separating the fluorocarbon-containing layer from the solvent-containing layer, and submitting the fluorocarbon layer to fractlonal distillation, to isolate the desired fluorocarbon fraction. Suitable solvents wnich may be used in the process include the lower aliphatic alcohols, and the lower aliphatic ketones.

Sarsfield, N.F.

1949-06-21T23:59:59.000Z

408

PRODUCTION OF URANIUM  

DOE Patents (OSTI)

The production of uranium metal by the reduction of uranium tetrafluoride is described. Massive uranium metal of high purily is produced by reacting uranium tetrafluoride with 2 to 20% stoichiometric excess of magnesium at a temperature sufficient to promote the reaction and then mantaining the reaction mass in a sealed vessel at temperature in the range of 1150 to 2000 d C, under a superatomospheric pressure of magnesium for a period of time sufficient 10 allow separation of liquid uranium and liquid magnesium fluoride into separate layers.

Spedding, F.H.; Wilhelm, H.A.; Keller, W.H.

1958-04-15T23:59:59.000Z

409

Product derivation for solution-driven product line engineering  

Science Conference Proceedings (OSTI)

Solution-driven product line engineering is a project business where products are created for each customer individually. Although reuse of results from former projects is widely done, configuration and integration of the results currently is often a ... Keywords: feature modeling, software product line development, solution-driven software development

Christoph Elsner; Daniel Lohmann; Wolfgang Schröder-Preikschat

2009-10-01T23:59:59.000Z

410

Lease Condensate Production  

Gasoline and Diesel Fuel Update (EIA)

Condensate Production Condensate Production (Million Barrels) Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes 2006 2007 2008 2009 2010 2011 View History U.S. 182 181 173 178 224 231 1979-2011 Alabama 2 2 2 2 2 2 1979-2011 Alaska 0 0 0 0 0 20 1979-2011 Arkansas 0 0 0 0 0 0 1979-2011 California 0 0 0 0 0 0 1979-2011 Coastal Region Onshore 0 0 0 0 0 0 1979-2011 Los Angeles Basin Onshore 0 0 0 0 0 0 1979-2011 San Joaquin Basin Onshore 0 0 0 0 0 0 1979-2011 State Offshore 0 0 0 0 0 0 1979-2011 Colorado 6 6 7 7 7 8 1979-2011 Florida 0 0 0 0 0 0 1979-2011 Kansas 1 1 1 1 2 1 1979-2011 Kentucky 0 0 0 0 0 0 1979-2011 Louisiana 22 20 20 18 14 14 1981-2011

411

Shale Gas Production  

Gasoline and Diesel Fuel Update (EIA)

Gas Production Gas Production (Billion Cubic Feet) Period: Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes 2007 2008 2009 2010 2011 View History U.S. 1,293 2,116 3,110 5,336 7,994 2007-2011 Alabama 0 0 0 0 2007-2010 Alaska 0 0 0 0 0 2007-2011 Arkansas 94 279 527 794 940 2007-2011 California 101 2011-2011 Colorado 0 0 1 1 3 2007-2011 Kentucky 2 2 5 4 4 2007-2011 Louisiana 1 23 293 1,232 2,084 2007-2011 North 1 23 293 1,232 2,084 2007-2011 South Onshore 0 2011-2011 Michigan 148 122 132 120 106 2007-2011 Montana 12 13 7 13 13 2007-2011 New Mexico 2 0 2 6 9 2007-2011 East 2 0 1 3 5 2007-2011 West 0 0 1 3 4 2007-2011 North Dakota 3 3 25 64 95 2007-2011

412

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

Geography of the MODIS Land Subsets for selected Field Sites Geography of the MODIS Land Subsets for selected Field Sites The 7- x 7-km grid containing the field or tower site is provided to enable comparison of pixel values of MODIS products with field data collected at a site. The values are intended to be examined over time either as a collection of individual values or combined (e.g., the average and range) within a 3- x 3-km grid or a 5- x 5-km grid around the site. Examples of analyses using the ASCII subset data can be found in presentations. If users would like to examine the MODIS data spatially in a map, we suggest that they obtain the GeoTIFF subsets or MODIS products from the LP DAAC. Please note that the grid and pixel sizes are not exact multiples of 1 km, but are only approximations. For instance, the grid and pixel size for the 1 km Sinusoidal grid is approximately 926 m. For additional information, please view the MODIS Web site.

413

Natural Gas Marketed Production  

U.S. Energy Information Administration (EIA) Indexed Site

Wellhead Price Marketed Production Period: Monthly Annual Wellhead Price Marketed Production Period: Monthly Annual Download Series History Download Series History Definitions, Sources & Notes Definitions, Sources & Notes Show Data By: Data Series Area Apr-13 May-13 Jun-13 Jul-13 Aug-13 Sep-13 View History U.S. 2,085,518 2,166,183 2,097,434 2,188,208 2,188,379 2,104,808 1973-2013 Federal Offshore Gulf of Mexico 116,480 112,975 102,113 109,113 102,493 105,284 1997-2013 Alabama NA NA NA NA NA NA 1989-2013 Alaska 29,725 27,904 25,445 23,465 23,613 25,916 1989-2013 Arizona NA NA NA NA NA NA 1991-2013 Arkansas NA NA NA NA NA NA 1991-2013 California NA NA NA NA NA NA 1989-2013 Colorado NA NA NA NA NA NA 1989-2013 Florida NA NA NA NA NA NA 1989-2013

414

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

10. Uranium reserve estimates at the end of 2012 10. Uranium reserve estimates at the end of 2012 million pounds U3O8 Forward Cost2 Uranium Reserve Estimates1 by Mine and Property Status, Mining Method, and State(s) $0 to $30 per pound $0 to $50 per pound $0 to $100 per pound Properties with Exploration Completed, Exploration Continuing, and Only Assessment Work W W 102.0 Properties Under Development for Production W W W Mines in Production W 21.4 W Mines Closed Temporarily and Closed Permanently W W 133.1 In-Situ Leach Mining W W 128.6 Underground and Open Pit Mining W W 175.4 Arizona, New Mexico and Utah 0 W 164.7 Colorado, Nebraska and Texas W W 40.8 Wyoming W W 98.5 Total 51.8 W 304.0 1 Sixteen respondents reported reserve estimates on 71 mines and properties. These uranium reserve estimates cannot be compared with the much larger historical data set of uranium reserves that were published in the July 2010 report U.S. Uranium Reserves Estimates at http://www.eia.gov/cneaf/nuclear/page/reserves/ures.html. Reserves, as reported here, do not necessarily imply compliance with U.S. or Canadian government definitions for purposes of investment disclosure.

415

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

8. U.S. uranium expenditures, 2003-2012 8. U.S. uranium expenditures, 2003-2012 million dollars Year Drilling Production Land and Other Total Expenditures Total Land and Other Land Exploration Reclamation 2003 W W 31.3 NA NA NA W 2004 10.6 27.8 48.4 NA NA NA 86.9 2005 18.1 58.2 59.7 NA NA NA 136.0 2006 40.1 65.9 115.2 41.0 23.3 50.9 221.2 2007 67.5 90.4 178.2 77.7 50.3 50.2 336.2 2008 81.9 221.2 164.4 65.2 50.2 49.1 467.6 2009 35.4 141.0 104.0 17.3 24.2 62.4 280.5 2010 44.6 133.3 99.5 20.2 34.5 44.7 277.3 2011 53.6 168.8 96.8 19.6 43.5 33.7 319.2 2012 66.6 186.9 99.4 16.8 33.3 49.3 352.9 Drilling: All expenditures directly associated with exploration and development drilling. Production: All expenditures for mining, milling, processing of uranium, and facility expense.

416

Production of Shale Oil  

E-Print Network (OSTI)

Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan provides a blueprint for the development of a 28,000 acre holding on Clear Creek in Garfield County, Colorado on property acquired by Standard Oil of California in the late 1940's and early 1950's. The paper describes these planning activities and the principal features of a proposed $5 billion project to develop facilities for production of 100,000 barrels per day of synthetic crude from oil shale. Subjects included are resource evaluation, environmental baseline studies, plans for acquisition of permits, plans for development of required retorting and mining technology and a preliminary description of the commercial project which will ultimately emerge from these activities. General financial impact of the project and the case for additional tax incentives to encourage it will be described.

Loper, R. D.

1982-01-01T23:59:59.000Z

417

Earthcare Products | Open Energy Information  

Open Energy Info (EERE)

Page Page Edit with form History Facebook icon Twitter icon » Earthcare Products Jump to: navigation, search Name Earthcare Products Place Ware, Hertfordshire, England, United Kingdom Zip SG12 9PY Sector Efficiency Product Consultancy and service company for commercial cooling products, specialising in high efficiency and low environmental impact refrigeration and natural refrigerants. References Earthcare Products[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Earthcare Products is a company located in Ware, Hertfordshire, England, United Kingdom . References ↑ "Earthcare Products" Retrieved from "http://en.openei.org/w/index.php?title=Earthcare_Products&oldid=344409"

418

Soy Protein Products - Electronic Version  

Science Conference Proceedings (OSTI)

Soybeans as Functional Foods and Ingredients is written to serve as a reference for food product developers, food technologists, nutritionists, plant breeders, academic and government professionals... Soy Protein Products - Electronic Version eChapters F

419

Enabling effective product launch decisions  

E-Print Network (OSTI)

The present work looks into the question of optimizing the performance of product launch decisions-in particular, the decisions of product development duration and manufacturing ramp-up. It presents an innovative model for ...

Akamphon, Sappinandana

2008-01-01T23:59:59.000Z

420

EERE Publication and Product Library  

NLE Websites -- All DOE Office Websites (Extended Search)

Mail Requests You have not requested any products. You can request that products and publications be mailed to you by clicking on the "Request by Mail" link in the publication...

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

U.S. Propane Production  

Gasoline and Diesel Fuel Update (EIA)

4 Notes: The chart provides a picture of propane production over the past three years compared to the five-year average. Total propane production in the first five months of this...

422

Fermi National Acceleratory Laboratory, Former Production Workers...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory, Former Production Workers Screening Projects Fermi National Acceleratory Laboratory, Former Production Workers Screening Projects...

423

Ames Laboratory, Former Production Workers Screening Projects...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Laboratory, Former Production Workers Screening Projects Ames Laboratory, Former Production Workers...

424

Argonne National Laboratory, Former Production Workers Screening...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Former Production Workers Screening Projects Argonne National Laboratory, Former Production Workers...

425

Production Network Supplier Characterization Project  

Science Conference Proceedings (OSTI)

... and compare energy and material efficiency across supply chain. No standard activities are presently identified for production network resilience ...

2012-05-29T23:59:59.000Z

426

Radiochemistry of the fission products  

SciTech Connect

This paper discusses the historical aspects of the radiochemistry of fission products. 20 figs., 2 tabs. (LSP)

Steinberg, E.P.

1988-01-01T23:59:59.000Z

427

Energy Basics: Geothermal Electricity Production  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Basics Renewable Energy Printable Version Share this resource Biomass Geothermal Direct Use Electricity Production Geothermal Resources Hydrogen Hydropower Ocean...

428

Electrode Technology for Aluminium Production  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, 2011 TMS Annual Meeting & Exhibition. Symposium, Electrode Technology for Aluminium Production. Sponsorship, The ...

429

Covered Product Categories (Fact Sheet)  

SciTech Connect

List of Federal Energy Management Program (FEMP)-designated product categories for energy-efficient procurement requirements.

Not Available

2012-02-01T23:59:59.000Z

430

WestConnect Transmission Product  

NLE Websites -- All DOE Office Websites (Extended Search)

WestConnect Transmission Product Federal Register Notices Customer Notifications Customer Comments Approved Rate Order FERC Confirmation...

431

Powder Metallurgy Processing and Products  

Science Conference Proceedings (OSTI)

About this Symposium. Meeting, Materials Science & Technology 2012. Symposium, Powder Metallurgy Processing and Products. Sponsorship. Organizer(s) ...

432

Software and Systems Division Products  

Science Conference Proceedings (OSTI)

... Other Products. DADS - Dictionary of Algorithms; ADLF parser (ADL activity diagrams to text form); SCRIBA; Metadata Conformance Analyzer.

2011-10-06T23:59:59.000Z

433

Estimate product quality with ANNs  

Science Conference Proceedings (OSTI)

Artificial neural networks (ANNs) have been applied to predict catalytic reformer octane number (ON) and gasoline splitter product qualities. Results show that ANNs are a valuable tool to derive fast and accurate product quality measurements, and offer a low-cost alternative to online analyzers or rigorous mathematical models. The paper describes product quality measurements, artificial neural networks, ANN structure, estimating gasoline octane numbers, and estimating naphtha splitter product qualities.

Brambilla, A. [Univ. of Pisa (Italy); Trivella, F. [Adicon Advanced Distillation Control SrL, Pisa (Italy)

1996-09-01T23:59:59.000Z

434

Consensus Coal Production Forecast for  

E-Print Network (OSTI)

Consensus Coal Production Forecast for West Virginia 2009-2030 Prepared for the West Virginia Summary 1 Recent Developments 2 Consensus Coal Production Forecast for West Virginia 10 Risks References 27 #12;W.Va. Consensus Coal Forecast Update 2009 iii List of Tables 1. W.Va. Coal Production

Mohaghegh, Shahab

435

China: Changing Wood Products Markets  

E-Print Network (OSTI)

#12;China: Changing Wood Products Markets less is probably known about the forestry and wood products market in China than most other U.S. trading partners. In the 1980s China emerged as the world,11,12). However, U.S. wood products exports to China declined nearly 93 percent from 1988 to 1996, from $-I%3

Zhang, Daowei

436

Abundance,Biomass, and Production  

E-Print Network (OSTI)

Abundance,Biomass, and Production Daniel B.Hayes,James R.Bence,Thomas J.Kwak, and Bradley E, the proportion of fish present that are #12;Abundance,Biomass,and Production 329 detected (i.e., sightability; available at http://www.ruwpa.st-and.ac.uk/distance/). #12;Abundance,Biomass,and Production 331 Box 8

Kwak, Thomas J.

437

Service/Product Provider  

NLE Websites -- All DOE Office Websites (Extended Search)

Paulus, Sokolowski & Sartor (PS&S) Johnson & Johnson (J&J) Paulus, Sokolowski & Sartor (PS&S) Johnson & Johnson (J&J) 67B Mountain Blvd. Ext., One Johnson & Johnson Plaza Warren, NJ 07059 New Brunswick, NJ 08933 Business: Architects & Engineers Business: Pharmaceutical Products Mike Belikoff, Senior Vice President Dennis Canavan, Executive Director Phone: 732-584-0449 Phone: 732-524-6269 Email: mbelikoff@psands.com Email: dcanavan2@corus.jnj.com PS&S conducts a Cogeneration Feasibility Study to help Johnson & Johnson improve their facilities' power reliability, reduce energy costs, and control greenhouse gas emissions. Project Scope: This project was part of the design and engineering of a new facility at Johnson & Johnson's existing Gurabo, Puerto Rico site. For this new site, PS&S investigated the feasibility of incorporating

438

Copy Service, Production Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Copy Service Copy Service Copying in color or black-and-white from hard copy or electronic files. Paper size up to 13" x 19" in a variety of stocks and colors. Larger Documents (up to 36" wide and 100" long) can be reproduced in Black & White from prints or files and can be saved in a variety of electronic format Variable Data Printing - personalized document production Tab Printing Forms CD/DVD Duplication CD/DVD direct printing Binding Collate documents, insert tab dividers, punch holes for binding Stapling documents up to 1 inch thick Spiral, adhesive and perfect binding. Hard covers also available upon request Folding & Mailing Print and apply mailing addresses and labels Machine fold documents and insert into envelopes for mailing Laminate printed items up to 35" wide.

439

China's Cement Production:  

NLE Websites -- All DOE Office Websites (Extended Search)

Estimation of CO Estimation of CO 2 Emissions from China's Cement Production: Methodologies and Uncertainties Jing Ke, Michael McNeil, Lynn Price, Nina Zheng Khanna, Nan Zhou Environmental Energy Technologies Division Lawrence Berkeley National Laboratory Reprint version of journal article published in "Energy Policy", Volume 57, Pages 172-181, June 2013 January 2013 This work was supported by the China Sustainable Energy Program of the Energy Foundation through the U.S. Department of Energy under Contract No. DE-AC02- 05CH11231. ERNEST ORLANDO LAWRENCE BERKELEY NATIONAL LABORATORY LBNL-6329E Disclaimer This document was prepared as an account of work sponsored by the United States Government. While this document is believed to contain correct information, neither the United States Government nor any

440

Model Products Available  

NLE Websites -- All DOE Office Websites (Extended Search)

Available Available Archiving environmental data products has become recognized as a vital research practice: it improves our ability to reproduce results and perform additional analyses while saving the cost of redundant data collection activities. The same rationale applies to archiving numerical models. Archived models will provide the methodological detail of numerical modeling studies to recreate published modeling results, enabling the synthesis of results across modeling studies and the investigation of new hypotheses. In addition, archived models will allow determination of uncertainties for comparison with results from other models in assessment / policy studies. The model source code will also allow others to see how models treat individual processes. We are creating a two-tiered archive for numerical models. The first tier

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Security Administration Production Office,  

NLE Websites -- All DOE Office Websites (Extended Search)

JUNE/JULY 2013 JUNE/JULY 2013 inside this issue ... Reaching the summit - Big hitters talk economic development Page 3 Saving yesterday's knowledge today Page 5 What's a fellow to do? Page 6 ... and other Y-12 news On June 3 newly appointed Secretary of Energy Ernest Moniz (right) made Oak Ridge the site of his first official visit since being sworn in as head of the U.S. Department of Energy. Secretary Moniz met earlier in the day with national lab directors at Oak Ridge National Laboratory, then came to Y-12 for tours and a meeting with the National Nuclear Security Administration Production Office, B&W Y-12 and ORNL employees. He was joined by Rep. Chuck Fleischmann. The Secretary described Oak Ridge as a place where DOE's chief missions of nuclear security, environmental

442

Service/Product Provider  

NLE Websites -- All DOE Office Websites (Extended Search)

Wheatstone Energy Frito-Lay Wheatstone Energy Frito-Lay 1975 The Exchange, Ste. 320 7701 Legacy Dr. Atlanta, GA 30339 Plano, TX 75024 Business: Lighting, Electrical, HVAC Business: Snack Foods James B. Dore, Director, Sales and Marketing Rob Schasel, Director, Energy & Utilities Phone: 770-916-7107 Phone: 972-334-5567 Email: jim.dore@wheatstoneenergy.com Email: robert.d.schasel@fritolay.com Frito-Lay leverages its energy effort by partnering with Wheatstone Energy to identify and implement lighting improvements resulting in savings of $2.2 million. Project Scope Wheatstone provided turnkey services in upgrading the lighting systems at 96 distribution centers and 16 snack food production plants across North America. Project Summary In addressing lighting retrofits and lighting control strategies, Wheatstone's turnkey services included

443

Production of magnesium metal  

DOE Patents (OSTI)

A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

Blencoe, James G. (Harriman, TN); Anovitz, Lawrence M. (Knoxville, TN); Palmer, Donald A. (Oliver Springs, TN); Beard, James S. (Martinsville, VA)

2010-02-23T23:59:59.000Z

444

Production of zinc pellets  

DOE Patents (OSTI)

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries. 6 figs.

Cooper, J.F.

1996-11-26T23:59:59.000Z

445

Production of zinc pellets  

DOE Patents (OSTI)

Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries.

Cooper, John F. (Oakland, CA)

1996-01-01T23:59:59.000Z

446

PRODUCTION OF THORIA WARE  

DOE Patents (OSTI)

The production of thoria ware of very low porosity by the slip casting of pure thoria is described. It comprises dry milling calcined thoria to obtain particles ranging up to 11 microns in size and having 60% of particles less than 2 microns, forming an aqueous slip of the milled thoric casting the slip and firing the dry cast at a sintering temperature of from 1600 to 1825 d C. The preferred composition of the slip is 1600 grams of thoria in each liter of slip. The preferred pH of the slip is 1. When thoria of 99.9% purity is used the slip is suitable for casting for as long as six weeks after preparation.

Murray, P.; Denton, I.; Wilkinson, D.

1957-10-01T23:59:59.000Z

447

Synthesis gas production  

SciTech Connect

Raw synthesis gas produced by the gasification of coal, heavy oil or similar carbonaceous material is contacted with a reforming catalyst at a temperature in the range between about 1000/sup 0/ and about 1800/sup 0/F and at a pressure between about 100 and about 2000 psig prior to adjustment of the carbon monoxide-to-hydrogen ratio and treatment of the gas to increase its Btu content. This catalytic reforming step eliminates C/sub 2/+ compounds in the gas which tend to form tarry downstream waste products requiring further treatment, obviates polymerization problems which may otherwise interfere with upgrading of the gas by means of the water gas shift and methanation reactions, and improves overall process thermal efficiency by making possible efficient low level heat recovery.

Kalina, T.; Moore, R.E.

1977-09-06T23:59:59.000Z

448

Economics of hydrogen production  

DOE Green Energy (OSTI)

Much of the current interest in hydrogen (H/sub 2/) centers around its potential to displace oil and gas as a fuel. The results of this study should be useful to research and development managers making funding decisions, and they should also be of interest to energy analysts, economists, and proponents of a hydrogen economy. We examined the current costs of H/sub 2/ produced by commercially available technologies (from fossil fuels and by electrolysis) and projected these costs to 2010, to set cost goals for H/sub 2/ produced via new technologies. We also examined the sensitivity of H/sub 2/ costs to varying energy price forecasts, capital costs and the required rate of return on investment, and by-product credits. We find that conventionally produced H/sub 2/ will not break into the fuel market before 2010. 23 references, 19 figures, 12 tables.

Gaines, L.L.; Wolsky, A.M.

1984-01-01T23:59:59.000Z

449

Total Marketed Production ..............  

Gasoline and Diesel Fuel Update (EIA)

billion cubic feet per day) billion cubic feet per day) Total Marketed Production .............. 68.95 69.77 70.45 71.64 71.91 71.70 71.46 71.57 72.61 72.68 72.41 72.62 70.21 71.66 72.58 Alaska ......................................... 1.04 0.91 0.79 0.96 1.00 0.85 0.77 0.93 0.97 0.83 0.75 0.91 0.93 0.88 0.87 Federal GOM (a) ......................... 3.93 3.64 3.44 3.82 3.83 3.77 3.73 3.50 3.71 3.67 3.63 3.46 3.71 3.70 3.62 Lower 48 States (excl GOM) ...... 63.97 65.21 66.21 66.86 67.08 67.08 66.96 67.14 67.92 68.18 68.02 68.24 65.58 67.07 68.09 Total Dry Gas Production .............. 65.46 66.21 66.69 67.79 68.03 67.83 67.61 67.71 68.69 68.76 68.50 68.70 66.55 67.79 68.66 Gross Imports ................................ 8.48 7.60 7.80 7.95 8.27 7.59 7.96 7.91 7.89 7.17 7.61 7.73 7.96 7.93 7.60 Pipeline ........................................

450

Global production through 2005  

SciTech Connect

Two companion studies released recently should provide great food for thought among geo-political strategists and various national governments. If predictions contained in these Petroconsultants studies of oil and gas production trends for the next 10 years are realized, there will be great repercussions for net exporters and importers, alike. After analyzing and predicting trends within each of the world`s significant producing nations for the 1996--2005 period, the crude oil and condensate report concludes tat global production will jump nearly 24%. By contrast, worldwide gas output will leap 40%. The cast of characters among producers and exporters that will benefit from these increases varies considerably for each fuel. On the oil side, Russia and the OPEC members, particularly the Persian Gulf nations, will be back in the driver`s seat in terms of affecting export and pricing patterns. On the gas side, the leading producers will be an interesting mix of mostly non-OPEC countries. The reemergence of Persian Gulf oil producers, coupled with an anticipated long-term decline among top non-OPEC producing nations should present a sobering picture to government planners within large net importers, such as the US. They are likely to find themselves in much the same supply trap as was experienced in the 1970s, only this time the dependence on foreign oil supplies will be much worse. Gas supplies will not be similarly constrained, and some substitution for oil is probable. Here, two articles, ``World oil industry is set for transition`` and ``Worldwide gas surges forward in next decade,`` present a summary of the findings detailed in Petroconsultants` recent studies.

Foreman, N.E. [Petroconsultants, Inc., Houston, TX (United States)

1996-12-01T23:59:59.000Z

451

DOE Solar Decathlon: Product Directory  

NLE Websites -- All DOE Office Websites (Extended Search)

Directory Directory The U.S. Department of Energy Solar Decathlon 2009 Product Directory provides a complete listing of the products used in the solar-powered team houses. To find common household products, see the list below. You may also search for products by team or in the Product Directory spreadsheet Microsoft Excel . By Products By Team Advanced Search Household Products Bathroom Faucet Bathroom Sink Clothes Dryer Clothes Washer Clothes Washer/Dryer Cooktop Computer Desktop Laptop Decking Dishwasher Dishdrawer Under Counter Dishwasher Exhaust Hood Flooring Furniture Insulation Kitchen Cabinets Kitchen Countertops Kitchen Faucet Kitchen Sink Lighting Fixed Lighting (hardwired) Plug-In Lighting (lamps, plug-in fixtures) Sensors Oven Combination Microwave Steam Wall Photovoltaic Collectors

452

Determination of vertical profiles of aerosol extinction, single scatter  

NLE Websites -- All DOE Office Websites (Extended Search)

Determination of vertical profiles of aerosol extinction, single scatter Determination of vertical profiles of aerosol extinction, single scatter albedo and asymmetry parameter at Barrow. Sivaraman, Chitra Pacific Northwest National Laboratory Flynn, Connor Pacific Northwest National Laboratory Turner, David University of Wisconsin-Madison Category: Aerosols Efforts are currently underway to run and evaluate the Broadband Heating Rate Profile project at the ARM North Slope of Alaska (NSA) Barrow site for the time period March 2004 - February 2005. The Aerosol Best-Estimate (ABE) Value-Added Procedure (VAP) is to provide continuous estimates of vertical profiles of aerosol extinction, single-scatter albedo, and asymmetry parameter above the Northern Slopes of Alaska (NSA) facility. In the interest of temporal continuity, we have developed an algorithm that

453

Hydroprocessing Bio-oil and Products Separation for Coke Production  

Science Conference Proceedings (OSTI)

Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.

2013-04-01T23:59:59.000Z

454

Production design for plate products in the steel industry  

E-Print Network (OSTI)

The problem we solve yields a production design (or plan) for rectangular plate ...... (the CD width exploration phase), and then later with the slabs restricted to ...

455

Production design for plate products in the steel industry  

E-Print Network (OSTI)

Apr 5, 2007 ... Abstract: We describe an optimization tool for a multistage production process for rectangular steel plates. The problem we solve yields a ...

456

PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS  

Science Conference Proceedings (OSTI)

This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

2004-08-31T23:59:59.000Z

457

Factor Intensity, Product Switching, and Productivity: Evidence from Chinese Exporters  

E-Print Network (OSTI)

This paper analyzes how a …rm’s specialization in its core products after exporting a¤ects its factor intensity and productivity. Using Chinese manufacturing …rm data over the period of 1998-2007, we …nd that …rms become less capital-intensive but more productive after exporting, compared to non-exporters that share similar ex ante characteristics. To rationalize these …ndings that contrast with existing studies, we develop a variant of the model by Bernard, Redding, and Schott (2010, 2011) to consider …rms producing multiple products with varying capital intensity. The model predicts that when a …rm in a labor-abundant country starts exporting, it specializes in its core competencies by allocating more resources to produce labor-intensive products. Firm ex ante productivity is associated with a smaller decline in capital intensity after exporting. A sharper post-exporting decline in capital intensity is associated with a larger increase in measured total factor productivity. We …nd …rm-level evidence supporting these predictions. Using transaction-level data for the period over 2000-2006, we …nd that Chinese exporters continuously add new products that are less capital-intensive than their existing products

Yue Ma Y; Heiwai Tang Z; Yifan Zhang X; Peter Schott; Robert Staiger; Jo Van Biesebroeck

2012-01-01T23:59:59.000Z

458

Domestic Uranium Production Report  

Gasoline and Diesel Fuel Update (EIA)

5. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status at end of the year, 2008-2012 5. U.S. uranium in-situ-leach plants by owner, location, capacity, and operating status at end of the year, 2008-2012 In-Situ-Leach Plant Owner In-Situ-Leach Plant Name County, State (existing and planned locations) Production Capacity (pounds U3O8 per year) Operating Status at End of the Year 2008 2009 2010 2011 2012 Cameco Crow Butte Operation Dawes, Nebraska 1,000,000 Operating Operating Operating Operating Operating Hydro Resources, Inc. Crownpoint McKinley, New Mexico 1,000,000 Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Hydro Resources,Inc. Church Rock McKinley, New Mexico 1,000,000 Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed Partially Permitted And Licensed

459

MODIS Land Products Subsets  

NLE Websites -- All DOE Office Websites (Extended Search)

methods methods This section describes methods used to generate MODIS Land Subsets for Collection 4 and Collection 5 data products. Methods for Selected Sites (Collections 4 and 5) Methods for North America Tool (Collection 4) Methods for the Global Tool (Collection 5) Methods for Selected Sites (Collection 4 and 5) Source for Selected Site Data: Full MODIS scenes (1200-km x 1200-km) are initially subset to 11-km x 31-km (Collection 4) or 25-km x 25-km (Collection 5) by the MODAPS; these initial subsets contain the field site or flux tower. Reformatting and additional subsetting to 7-km x 7-km containing the field site or flux tower are done by the ORNL DAAC. Tools Used: The ORNL DAAC uses the MODIS Reprojection Tool (MRT) to reformat the MODIS data from HDF-EOS to binary format. A tool developed at ORNL is then used to convert the binary format to ASCII. The MRT is available from the Land Processes DAAC. Whereas the MRT can also be used to reproject data from its native projection to other projections, ORNL chose to forgo the resampling associated with reprojection to minimize data manipulation and distortion. The MOD12Q1 Land Cover Collection 3 data are in I-Sin projection, and the Collection 4 and Collection 5 data are in Sinusoidal projection.

460

Alaska drilling/production  

SciTech Connect

The icy waters of the Beaufort Sea continue to hold the focus for Alaska's offshore wildcatters. A federal Outer Continental Shelf sale that drew high bids totalling more than $2 billion set the stage for this exploration of a huge structure that conceivably could yield another megagiant like Prudhoe Bay. Elsewhere in Beaufort waters, 2 groups of companies unveiled a preliminary design proposal for the first commercial development of an oil field in U.S. Arctic waters. At Prudhoe Bay, an operator announced the North Slope's first tertiary enhanced oil recovery project even as work continued for a massive waterflood of the giant field's principal producing horizon. At Kuparuk River, drillers continued to develop a reservoir that is expected to ultimately yield more than one billion barrels of oil. Alaska's present production of ca 1.7 million bpd puts the state in a solid second place in the ranks of oil-producing states, runnerup only to Texas with an output of 2.5 million bpd.

Rintoul, B.

1983-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

PRODUCTION OF URANIUM HEXAFLUORIDE  

DOE Patents (OSTI)

A process for the production of uranium hexafluoride from the oxides of uranium is reported. In accordance with the method, the higher oxides of uranium may be reduced to uranium dioxide (UO/sub 2/), the latter converted into uranium tetrafluoride by reaction with hydrogen fluoride, and the UF/sub 4/ converted to UF/sub 6/ by reaction with a fluorinating agent, such as CoF/sub 3/. The UO/sub 3/ or U/sub 3/O/sub 8/ is placed in a reac tion chamber in a copper boat or tray enclosed in a copper oven, and heated to 500 to 650 deg C while hydrogen gas is passed through the oven. After nitrogen gas is used to sweep out the hydrogen and the water vapor formed, and while continuing to inaintain the temperature between 400 deg C and 600 deg C, anhydrous hydrogen fluoride is passed through. After completion of the conversion of UO/sub 2/ to UF/sub 4/ the temperature of the reaction chamber is lowered to about 400 deg C or less, the UF/sub 4/ is mixed with the requisite quantity of CoF/sub 3/, and after evacuating the chamber, the mixture is heated to 300 to 400 deg C, and the resulting UF/sub 6/ is led off and delivered to a condenser.

Fowler, R.D.

1957-08-27T23:59:59.000Z

462

Reaction products of chlorine dioxide  

E-Print Network (OSTI)

Concern over the presence of trihalomethanes and other chlorinated by-products in chlorinedisinfected drinking water has led to extensive investigations of treatment options for controlling these by-products. Among these treatment options is the use of an alternative disinfectant such as chlorine dioxide. Although chlorine dioxide does not react to produce trihalomethanes, considerable evidence does exist that chlorine dioxide, like chlorine, will produce other organic by-products. The literature describes chlorinated and nonchlorinated derivatives including acids, epoxides, quinones, aldehydes, disulfides, and sulfonic acids that are products of reactions carried out under conditions that are vastly different from those experienced during drinking water treatment. Evidence is beginning to emerge, however, that some by-products in these categories may be produced. Certain specific volatile aldehydes and halogenated derivatives as determined by the total organic halogen parameter are among those by-products that have been measured.

Alan A. Stevens

1982-01-01T23:59:59.000Z

463

Product Service Codes @ Headquarters | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Product Service Codes @ Headquarters Product Service Codes @ Headquarters A listing of Product Service Codes used at Headquarters Procurement Services Produce Service Codes @...

464

Coal Combustion Products | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Combustion Products Coal Combustion Products Coal combustion products (CCPs) are solid materials produced when coal is burned to generate electricity. Since coal provides the...

465

Energy Basics: Bio-Based Products  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Share this resource Biomass Biofuels Biopower Bio-Based Products Biomass Resources Geothermal Hydrogen Hydropower Ocean Solar Wind Bio-Based Products Almost all of the products...

466

Challenges associated with shale gas production | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Challenges associated with shale gas production Challenges associated with shale gas production What challenges are associated with shale gas production? More Documents &...

467

Monthly Biodiesel Production Report - Energy Information ...  

U.S. Energy Information Administration (EIA)

Highlights. Production - U.S. production of biodiesel was 128 million gallons in July 2013. This was an increase from production of 113 million gallons in June 2013.

468

Genomic Prospecting for Microbial Biodiesel Production  

E-Print Network (OSTI)

and Kato, N. (2002) Wax ester production from n-alkanes bycoli engineered for fuel production. Microbiology 152: 2529-Increased fatty acid production in potato by engineering of

Lykidis, Athanasios

2008-01-01T23:59:59.000Z

469

Map Data: Total Production | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Total Production Map Data: Total Production totalprod2009final.csv More Documents & Publications Map Data: Renewable Production Map Data: State Consumption...

470

Net Primary Production (NPP) Project Page  

NLE Websites -- All DOE Office Websites (Extended Search)

RegionalGlobal > Net Primary Production (NPP) Net Primary Production (NPP) Project Overview The ORNL DAAC Net Primary Production (NPP) data set collection contains field...

471

Fitcraft Production sro | Open Energy Information  

Open Energy Info (EERE)

Fitcraft Production sro Jump to: navigation, search Name Fitcraft Production sro Place Novy Jicin, Czech Republic Zip 74101 Sector Solar Product Czech manufacturer of silicon...

472

Map Data: Renewable Production | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Renewable Production Map Data: Renewable Production renewprod2009.csv More Documents & Publications Map Data: Total Production Map Data: State Consumption Directory of Potential...

473

Weapons production | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Weapons production Weapons production An effective production infrastructure is critical to national security. Y-12 continues to replace World War II-era facilities to increase...

474

Coal Combustion Products | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Coal Combustion Products Coal Combustion Products Coal combustion products (CCPs) are solid materials produced when coal is burned to generate electricity. Since coal provides the...

475

Natural Gas Dry Production (Annual Supply & Disposition)  

U.S. Energy Information Administration (EIA) Indexed Site

Repressuring Nonhydrocarbon Gases Removed Vented and Flared Marketed Production Natural Gas Processed NGPL Production, Gaseous Equivalent Dry Production Imports By Pipeline LNG...

476

Federal Energy Management Program: Covered Product Category:...  

NLE Websites -- All DOE Office Websites (Extended Search)

STAR luminaires product category covers a wide range of lighting products, both residential and commercial. ENERGY STAR Qualified Products Updated March 2013 FEMP provides...

477

Federal Energy Management Program: Covered Product Category:...  

NLE Websites -- All DOE Office Websites (Extended Search)

Cool Roof Products to someone by E-mail Share Federal Energy Management Program: Covered Product Category: Cool Roof Products on Facebook Tweet about Federal Energy Management...

478

NIDC: Online Catalog of Isotope Products Home  

NLE Websites -- All DOE Office Websites (Extended Search)

Catalog of Isotope Products Please select an option below. PRODUCTS VIEWING Select using PERIODIC TABLE or NUCLIDE CHART or LIST SEARCHING SEARCH for a Product REQUESTING REQUEST a...

479

Monthly Biodiesel Production Report - Energy Information ...  

U.S. Energy Information Administration (EIA)

Highlights. Production - U.S. production of biodiesel was 127 million gallons in September 2013. Biodiesel production during September 2013 was about ...

480

Advanced synfuel production with fusion  

SciTech Connect

An important first step in the synthesis of liquid and gaseous fuels is the production of hydrogen. Thermonuclear fusion offers a nearly inexhaustible source of energy for the production of hydrogen from water. Depending on design, electric generation efficiencies of approx. 40 to 60% and hydrogen production efficiencies by high temperature electrolysis of approx. 50 to 70% are projected for fusion reactors using high temperature blankets.

Powell, J.R.; Fillo, J.

1979-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "value-added product vap" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Particulate Waste Product Combustion System  

E-Print Network (OSTI)

The disposal of low value by-products from the processing of agricultural food crops presents many energy consuming problems to the food producing industry. Consequently, industry has the continuous problem of utilization or disposal of the by-products within the frame work of its economic structure. The system presented here is an approach to an economical way of utilizing waste by-products for an energy source there-by reducing dependency on traditional fuel sources.

King, D. R.; Chastain, C. E.

1984-01-01T23:59:59.000Z

482

PRODUCTION VERIFICATION TESTS  

Science Conference Proceedings (OSTI)

A summary of the demonstration of 14 stages (in 10 wells) of a unique liquid-free stimulation process which employs carbon dioxide (CO{sub 2}) as the working fluid in ten Candidate Wells. Three were situated in Perry County and seven in Pike County of eastern kentucky's Big Sandy gas field. These activities included four individual efforts which have previously been described in detail in four submitted Final Reports, and are herein summarized. These ten Candidate wells produce from the Devonian Shale which is well known to be damaged by liquid based stimulation processes. They were treated with a total of fourteen stages; four as a single stage, and the others in two stages per well all containing approximately 120 tons of CO{sub 2} per stage. These liquid free stimulations also contained proppant quantities on the order of 45,000 lbs per stage. The results show in the three Perry Co Candidate wells that the stimulations were not as effective as the best conventional technology, and resulted in a stimulation cost for produced gas of $0.69 per Mcf vs $0.43 for N{sub 2} gas stimulations. The results in the Pike County Candidates, where the shale section is thicker--1,025 vs. 350 feet, indicated a superior response from the wells stimulated with the CO{sub 2}/sand process. A five year production benefit of 67.7 MMcf per stage, or 135.4 MMcf per well over that from the closest competing technology which results in a 3.41 benefit ratio and a stimulation cost for produced gas of $0.47 per Mcf vs $1.14 for N{sub 2} gas.

Raymond L. Mazza

2003-09-30T23:59:59.000Z

483

Waste form product characteristics  

SciTech Connect

The Department of Energy has operated nuclear facilities at the Idaho National Engineering Laboratory (INEL) to support national interests for several decades. Since 1953, it has supported the development of technologies for the storage and reprocessing of spent nuclear fuels (SNF) and the resultant wastes. However, the 1992 decision to discontinue reprocessing of SNF has left nearly 768 MT of SNF in storage at the INEL with unspecified plans for future dispositioning. Past reprocessing of these fuels for uranium and other resource recovery has resulted in the production of 3800 M{sup 3} calcine and a total inventory of 7600 M{sup 3} of radioactive liquids (1900 M{sup 3} destined for immediate calcination and the remaining sodium-bearing waste requiring further treatment before calcination). These issues, along with increased environmental compliance within DOE and its contractors, mandate operation of current and future facilities in an environmentally responsible manner. This will require satisfactory resolution of spent fuel and waste disposal issues resulting from the past activities. A national policy which identifies requirements for the disposal of SNF and high level wastes (HLW) has been established by the Nuclear Waste Policy Act (NWPA) Sec.8,(b) para(3)) [1982]. The materials have to be conditioned or treated, then packaged for disposal while meeting US Environmental Protection Agency (EPA) and Nuclear Regulatory Commission (NRC) regulations. The spent fuel and HLW located at the INEL will have to be put into a form and package that meets these regulatory criteria. The emphasis of Idaho Chemical Processing Plant (ICPP) future operations has shifted toward investigating, testing, and selecting technologies to prepare current and future spent fuels and waste for final disposal. This preparation for disposal may include mechanical, physical and/or chemical processes, and may differ for each of the various fuels and wastes.

Taylor, L.L.; Shikashio, R.

1995-01-01T23:59:59.000Z

484

Fission product solvent extraction  

SciTech Connect

Two main objectives concerning removal of fission products from high-level tank wastes will be accomplished in this project. The first objective entails the development of an acid-side Cs solvent-extraction (SX) process applicable to remediation of the sodium-bearing waste (SBW) and dissolved calcine waste (DCW) at INEEL. The second objective is to develop alkaline-side SX processes for the combined removal of Tc, Cs, and possibly Sr and for individual separation of Tc (alone or together with Sr) and Cs. These alkaline-side processes apply to tank wastes stored at Hanford, Savannah River, and Oak Ridge. This work exploits the useful properties of crown ethers and calixarenes and has shown that such compounds may be economically adapted to practical processing conditions. Potential benefits for both acid- and alkaline-side processing include order-of-magnitude concentration factors, high rejection of bulk sodium and potassium salts, and stripping with dilute (typically 10 mM) nitric acid. These benefits minimize the subsequent burden on the very expensive vitrification and storage of the high-activity waste. In the case of the SRTALK process for Tc extraction as pertechnetate anion from alkaline waste, such benefits have now been proven at the scale of a 12-stage flowsheet tested in 2-cm centrifugal contactors with a Hanford supernatant waste simulant. SRTALK employs a crown ether in a TBP-modified aliphatic kerosene diluent, is economically competitive with other applicable separation processes being considered, and has been successfully tested in batch extraction of actual Hanford double-shell slurry feed (DSSF).

Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A. [and others

1998-02-01T23:59:59.000Z

485

Productivity index of multilateral wells.  

E-Print Network (OSTI)

??In the history of petroleum science there are a vast variety of productivity solutions for different well types, well configurations and flow regimes. The main… (more)

Nunsavathu, Upender Naik.

2006-01-01T23:59:59.000Z

486

Production Wells | Open Energy Information  

Open Energy Info (EERE)

Production Wells Production Wells Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Technique: Production Wells Details Activities (13) Areas (13) Regions (0) NEPA(7) Exploration Technique Information Exploration Group: Drilling Techniques Exploration Sub Group: Development Drilling Parent Exploration Technique: Development Drilling Information Provided by Technique Lithology: Drill cuttings are analyzed to determine lithology and mineralogy Stratigraphic/Structural: Fractures, faults, and geologic formations that the well passes through are identified and mapped. Hydrological: Identify aquifers, reservoir boundaries, flow rates, fluid pressure, and chemistry Thermal: Direct temperature measurements from within the reservoir Dictionary.png Production Wells:

487

High Quality, Scalable Graphene Production  

Presentation_namefor the U.S. Department of Energy ... –No good characterization tool for large area ... •Current range of product on the market

488

2012 Domestic Uranium Production Report  

U.S. Energy Information Administration (EIA)

udrilling 2012 Domestic Uranium Production Report Next Release Date: May 2014 Table 1. U.S. uranium drilling activities, 2003-2012 Year Exploration Drilling

489

The Year of Peak Production  

U.S. Energy Information Administration (EIA)

When world conventional oil production will peak is, of course, the bottom-line question. It has already peaked in the United States, in 1970.

490

Energy Basics: Geothermal Electricity Production  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

EERE: Energy Basics Geothermal Electricity Production A photo of steam emanating from geothermal power plants at The Geysers in California. Geothermal energy originates from deep...

491

EERE Publication and Product Library  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Share View Related Latest Additions Product Thumbnail Image Low-Temperature Geothermal Projects Nationwide Poster of low-temperature and co-produced geothermal projects...

492

THE PRODUCTION OF GAS HYDRATES  

E-Print Network (OSTI)

Mr. Chairman and Members of the Subcommittee, thank-you for the opportunity to appear before you today to discuss the production and economics of gas hydrate development.

Steven H. Hancock; P. Eng

2009-01-01T23:59:59.000Z

493

ORNL DAACData Product Citation Policy  

NLE Websites -- All DOE Office Websites (Extended Search)

have questions about how to cite ORNL DAAC data products or services, please contact the ORNL DAAC User Services Office (USO). An editorial "Citations to Published Data Sets"...

494

Production I/O Characterization  

NLE Websites -- All DOE Office Websites (Extended Search)

library that collects IO access pattern in- formation from large-scale production applications with minimal overhead. In this paper we present our experiences in...

495

Xylooligosaccharides Production, Quantification, and Characterization...  

NLE Websites -- All DOE Office Websites (Extended Search)

Xylooligosaccharides Production, Quantification, and Characterization in Context of Lignocellulosic Biomass Pretreatment Qing Qing 1 , Hongjia Li 2,3,4, , Rajeev Kumar 2,4 and...

496

Production work up for grabs  

NLE Websites -- All DOE Office Websites (Extended Search)

Crossroads effort had dealt the laboratory a tremendous blow as the demands for production seemed to override any scientific research and development. On September 24, 1946,...

497

Nanoparticulate Materials: Production, Consolidation and ...  

Science Conference Proceedings (OSTI)

The main scope of this symposium will cover both a broad range of conventional and novel nanoparticle production techniques and a wide spectrum of methods ...

498

Future Prospects for Oil Production  

U.S. Energy Information Administration (EIA)

2010 2015 2020 2025 2030 2035 . High TRR . Reference . High EUR . Tight oil production . million barrels per day . Low EUR . 5 Adam Sieminski

499

Available Technologies: Ligninolytic Enzyme Production  

The estimated production cost of laccase using this technology is about 10-60% of current commercial prices. The efficient bioconversion of plant ...

500

Cast Shop for Aluminum Production  

Science Conference Proceedings (OSTI)

Organizer(s), Trond Furu, Hydro ... Review at Several US Aluminum Die Cast Manufacturers Using Unique, Non-Wetting, Micro-Porous Refractory Products.