Sample records for valuable products cxs

  1. Thermochemical conversion of waste materials to valuable products

    SciTech Connect (OSTI)

    Saraf, S. [Engineering Technologies, Lombard, IL (United States)

    1997-12-31T23:59:59.000Z

    The potential offered by a large variety of solid and liquid wastes for generating value added products is widely recognized. Extensive research and development has focused on developing technologies to recover energy and valuable products from waste materials. These treatment technologies include use of waste materials for direct combustion, upgrading the waste materials into useful fuel such as fuel gas or fuel oil, and conversion of waste materials into higher value products for the chemical industry. Thermal treatment in aerobic (with oxygen) conditions or direct combustion of waste materials in most cases results in generating air pollution and thereby requiring installation of expensive control devices. Thermochemical conversion in aerobic (without oxygen) conditions, referred to as thermal decomposition (destructive distillation) results in formation of usable liquid, solid, and gaseous products. Thermochemical conversion includes gasification, liquefaction, and thermal decomposition (pyrolysis). Each thermochemical conversion process yields a different range of products and this paper will discuss thermal decomposition in detail. This paper will also present results of a case study for recovering value added products, in the form of a liquid, solid, and gas, from thermal decomposition of waste oil and scrap tires. The product has a high concentration of benzene, xylene, and toluene. The solid product has significant amounts of carbon black and can be used as an asphalt modifier for road construction. The gas product is primarily composed of methane and is used for heating the reactor.

  2. Production of valuable hydrocarbons by flash pyrolysis of oil shale

    DOE Patents [OSTI]

    Steinberg, M.; Fallon, P.T.

    1985-04-01T23:59:59.000Z

    A process for the production of gas and liquid hydrocarbons from particulated oil shale by reaction with a pyrolysis gas at a temperature of from about 700/sup 0/C to about 1100/sup 0/C, at a pressure of from about 400 psi to about 600 psi, for a period of about 0.2 second to about 20 seconds. Such a pyrolysis gas includes methane, helium, or hydrogen. 3 figs., 3 tabs.

  3. Catalytic Transformation of Waste CO{sub 2} into Valuable Products

    SciTech Connect (OSTI)

    Anderson, Jason; Shepard, Peter; Valente, Ron

    2013-09-30T23:59:59.000Z

    Novomer’s novel materials contain up to 50% by mass CO{sub 2} and provide a unique platform for re-using CO{sub 2} from waste industrial sources and converting it into useful products. This Report covers the progress made by Novomer during the DOE funded project (DOE Award #: DE-FE0002474) under the “Carbon Capture and Sequestration from Industrial Sources and Innovative Concepts for Beneficial CO{sub 2} Use” program. This includes Phase 1 and Phase 2, including all three subphases of the latter. Novomer completed all technical and commercial objectives in both Phase 1 and Phase 2, including the six Phase 2 Objectives outlined in the SOPO within budget by the project end date of September 30, 2013. These are: validating the economics are competitive, validate the carbon footprint, validate acceptable product performance, verify robust manufacturing process, validate large markets exist, and qualify at least 3 products with customers.

  4. Carbon Dioxide Conversion to Valuable Chemical Products over Composite Catalytic Systems

    SciTech Connect (OSTI)

    Dagle, Robert A.; Hu, Jianli; Jones, Susanne B.; Wilcox, Wayne A.; Frye, John G.; White, J. F.; Jiang, Juyuan; Wang, Yong

    2013-05-01T23:59:59.000Z

    Presented is an experimental study on catalytic conversion of carbon dioxide into methanol, ethanol and acetic acid. Catalysts having different catalytic functions were synthesized and combined in different ways to enhance selectivity to desired products. The combined catalyst system possessed the following functions: methanol synthesis, Fischer-Tropsch synthesis, water-gas-shift and hydrogenation. Results showed that the methods of integrating these catalytic functions played important role in achieving desired product selectivity. It was speculated that if methanol synthesis sites were located adjacent to the C-C chain growth sites, the formation rate of C2 oxygenates would be enhanced. The advantage of using high temperature methanol catalyst PdZnAl in the combined catalyst system was demonstrated. In the presence of PdZnAl catalyst, the combined catalyst system was stable at temperature of 380oC. It was observed that, at high temperature, kinetics favored oxygenate formation. Results implied that the process can be intensified by operating at high temperature using Pd-based methanol synthesis catalyst. Steam reforming of the byproduct organics was demonstrated as a means to provide supplemental hydrogen. Preliminary process design, simulation, and economic analysis of the proposed CO2 conversion process were carried out. Economic analysis indicates how ethanol production cost was affected by the price of CO2 and hydrogen.

  5. Modification of the EIC hydrogen sulfide abatement process to produce valuable by-products. Final report, May 4, 1981-May 4, 1982

    SciTech Connect (OSTI)

    Offenhartz, P. O'D.

    1982-06-01T23:59:59.000Z

    A program of analytical and experimental studies has been carried out to develop modifications of the CUPROSUL process for the desulfurization of geothermal steam. The objective of the program was to devise practical means to manipulate the chemistry of the process so that the consumption of raw materials could be controlled and a variety of valuable by-products could be produced. The process had been demonstrated, at one-tenth commercial scale, for steam of the Geysers' average composition in a configuration which resulted in essentially complete oxidation of sulfide to sulfate. The ability to control the extent of oxidation would increase process flexibility and extend its range of applicability to steams of widely varying composition. Preliminary market surveys of raw materials required for the process and by-products which could be produced indicated that controlling the oxidation of sulfides to produce elemental sulfur would probably be the preferred process option. Use of lime to treat sulfate-containing purge streams to produce by-product gypsum and ammonia for recycle or sale could also be justified for certain steam compositions. Recovery of ammonium sulfate alone from the purge stream would not normally be justified unless corecovery of other valuable by-products, such as boric acid, was possible at incremental cost. It was found that ferric sulfate was a highly effective, selective oxidant for the controlled oxidation of copper sulfide solids to produce elemental sulfur for sale and copper sulfate for recycle.

  6. Valuable Plants Native to Texas.

    E-Print Network [OSTI]

    Parks, Harris Braley

    1937-01-01T23:59:59.000Z

    and makes a splendid plant for cover along mud flats where the seasona.1 change of water would leave bare places. Commercial. Arundo Donax L. This is the reed grass of southern Texas. It has been used for many years to aid in erosion control...LIBRARY, A b COttECE, CAMPUS. TEXAS AGRICULTURAL EXPERIMENT STATION A. B. CONNER, DIRECTOR COLLEGE STATION. BRAZOS COUNTY, TEXAS -- BULLETIN NO. 551 AUGUST, 1937 -- DIVISION OF APICULTVRE VALUABLE PLANTS NATIVE TO TEXAS i...

  7. Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids

    SciTech Connect (OSTI)

    Harrison, Stephen [SIMBOL Materials

    2014-04-30T23:59:59.000Z

    Executive Summary Simbol Materials studied various methods of extracting valuable minerals from geothermal brines in the Imperial Valley of California, focusing on the extraction of lithium, manganese, zinc and potassium. New methods were explored for managing the potential impact of silica fouling on mineral extraction equipment, and for converting silica management by-products into commercial products.` Studies at the laboratory and bench scale focused on manganese, zinc and potassium extraction and the conversion of silica management by-products into valuable commercial products. The processes for extracting lithium and producing lithium carbonate and lithium hydroxide products were developed at the laboratory scale and scaled up to pilot-scale. Several sorbents designed to extract lithium as lithium chloride from geothermal brine were developed at the laboratory scale and subsequently scaled-up for testing in the lithium extraction pilot plant. Lithium The results of the lithium studies generated the confidence for Simbol to scale its process to commercial operation. The key steps of the process were demonstrated during its development at pilot scale: 1. Silica management. 2. Lithium extraction. 3. Purification. 4. Concentration. 5. Conversion into lithium hydroxide and lithium carbonate products. Results show that greater than 95% of the lithium can be extracted from geothermal brine as lithium chloride, and that the chemical yield in converting lithium chloride to lithium hydroxide and lithium carbonate products is greater than 90%. The product purity produced from the process is consistent with battery grade lithium carbonate and lithium hydroxide. Manganese and zinc Processes for the extraction of zinc and manganese from geothermal brine were developed. It was shown that they could be converted into zinc metal and electrolytic manganese dioxide after purification. These processes were evaluated for their economic potential, and at the present time Simbol Materials is evaluating other products with greater commercial value. Potassium Silicotitanates, zeolites and other sorbents were evaluated as potential reagents for the extraction of potassium from geothermal brines and production of potassium chloride (potash). It was found that zeolites were effective at removing potassium but the capacity of the zeolites and the form that the potassium is in does not have economic potential. Iron-silica by-product The conversion of iron-silica by-product produced during silica management operations into more valuable materials was studied at the laboratory scale. Results indicate that it is technically feasible to convert the iron-silica by-product into ferric chloride and ferric sulfate solutions which are precursors to a ferric phosphate product. However, additional work to purify the solutions is required to determine the commercial viability of this process. Conclusion Simbol Materials is in the process of designing its first commercial plant based on the technology developed to the pilot scale during this project. The investment in the commercial plant is hundreds of millions of dollars, and construction of the commercial plant will generate hundreds of jobs. Plant construction will be completed in 2016 and the first lithium products will be shipped in 2017. The plant will have a lithium carbonate equivalent production capacity of 15,000 tonnes per year. The gross revenues from the project are expected to be approximately $ 80 to 100 million annually. During this development program Simbol grew from a company of about 10 people to over 60 people today. Simbol is expected to employ more than 100 people once the plant is constructed. Simbol Materials’ business is scalable in the Imperial Valley region because there are eleven geothermal power plants already in operation, which allows Simbol to expand its business from one plant to multiple plants. Additionally, the scope of the resource is vast in terms of potential products such as lithium, manganese and zinc and potentially potassium.

  8. Valuable rare earth metals from old electronics | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Valuable rare earth metals from old electronics Scientists at the Critical Materials Institute have developed a two-step recovery process that makes recycling rare-earth metals...

  9. Why Springs Are Valuable Natural springs are important aquatic resources.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    source of clean, high-quality groundwater that flows at a relatively constant rate and temperature hot weather and droughts. Spring streams and riparian lands provide critical water, food, refuge. Because springs are dependable, they are an increasingly valuable supply of water for people and wildlife

  10. Who Gets Diabetes? Good health is your most valuable asset

    E-Print Network [OSTI]

    Who Gets Diabetes? Good health is your most valuable asset ­ make the most of it. Millions, blindness and many other health problems if it is not controlled. By managing this condition with the right care, treatment and lifestyle changes, a patient diagnosed with diabetes can continue to live a happy

  11. Recovery of Valuable Chlorosilane Intermediates by a Novel Waste Conversion Process

    SciTech Connect (OSTI)

    J. Ashley Brinson

    2002-06-20T23:59:59.000Z

    From 1994 to 2001, Dow Corning studied a waste recycling process to recover direct process residues (DPR) resulting from the production of silicone precursors. Over the course of eight years, Dow Corning constructed and operated a pilot plant, a small scale commercial plant, and a full scale plant. The process reacts DPR with hydrogen and chlorosilane monomers at high temperature and high pressure. The process converted 85% of the DPR to valuable chlorosilane monomers such as dimethyldichlorosilane and methyldichlorosilane. When feeding methyltrichlorosilane, the process converted 30% of the MeSiCl3 to other monomers. Alternate co-feed monomers were tested. By converting waste DPR to valuable intermediates, the technology significantly reduces waste from the basic silicones manufacturing process.

  12. Recovery of Valuable Chlorosilane Intermediates by a Novel Waste Conversion Process, Phase IIIB (Progress)

    SciTech Connect (OSTI)

    Kurt E. Anderson

    2000-03-31T23:59:59.000Z

    From June 1998 through September 1999, direct process residue (DPR, a waste byproduct) hydrogenolysis has been studied at a large pilot plant within Dow Corning's Carrollton, KY, facility. The system reacts filtered DPR with chlorosilane monomers at high temperature and pressure. The process routinely demonstrates DPR conversions from 59% to 89% on a monthly basis. The reaction product contains high concentrations of valuable monomers such as dimethyldichlorosilane and methyldichlorosilane. An expansion of the current unit's capacity is planned to be on-line by the end of CY2000. Furthermore, a larger DPR hydrogenolysis reactor based on these results is being designed for operation in Europe at Dow Corning's Barry, Wales, site.

  13. Energy Department Awards $18 Million to Develop Valuable Bioproducts...

    Office of Environmental Management (EM)

    University, Cellana and others to produce protein-based human and poultry nutritional products along with hydrotreated algal oil extract. Global Algae Innovations, Inc., El...

  14. Technologies for Extracting Valuable Metals and Compounds from Geothermal Fluids

    Broader source: Energy.gov [DOE]

    DOE Geothermal Peer Review 2010 - Presentation. Project objectives: Demonstrate geothermal mineral extraction; Demonstrate technical and economic feasibility; Produce products for market development; Generate operational data and scale up data so a commercial scale plant can be designed and built.

  15. Industry recognizes very small enterprises for their contribution of valuable products

    E-Print Network [OSTI]

    Québec, Université du

    Organization for Standardization/International Electrotechnical Commission (ISO/IEC) Joint Technical Committee and earning the confidence of companies, the use of ISO/ IEC JTC1/SC7 international standards is spreading in organizations of all sizes. These standards, however, were not written for very small development organizations

  16. Coal is a combustible sedimentary rock and a valuable economic resource. During the Pennsylvanian Period

    E-Print Network [OSTI]

    Polly, David

    Coal is a combustible sedimentary rock and a valuable economic resource. During the Pennsylvanian of years produced the bituminous coals currently found in southwestern Indiana. Bituminous coals in Indiana currently ranks as the seventh-largest coal-producing state in the nation and has an estimated 17.57 billion

  17. Coal waste seen as valuable resource Published: March. 29, 2011 at 8:09 PM

    E-Print Network [OSTI]

    Belogay, Eugene A.

    Coal waste seen as valuable resource Published: March. 29, 2011 at 8:09 PM ANAHEIM, Calif., March 29 (UPI) -- Fly ash, a byproduct of coal-burning electric power plants, could save billions. More than 450 coal-burning electric power plants in the United States produce about 130 million tons

  18. Conducting Private R&D at PNNL Tapping valuable government resources with a unique Use Permit

    E-Print Network [OSTI]

    Conducting Private R&D at PNNL Tapping valuable government resources with a unique Use Permit What, Battelle has built a rich history of technology deployment at PNNL that reaches even beyond American. Unique to PNNL is a powerful technology development and transfer mechanism known as the Use Permit

  19. Recovery of valuable chlorosilane intermediates by a novel waste conversion process. Technical report for phase IIIA (final) and phase IIIB (progress)

    SciTech Connect (OSTI)

    Anderson, K.E.

    1998-10-01T23:59:59.000Z

    From July 1994 through May 1998, direct process residue (DPR) hydrogenolysis has been studied in the laboratory, at a small Pilot Plant, and finally at a larger Pilot Plant within Dow Corning`s Carrollton, Kentucky plant. The system reacts filtered DPR with monomer at high temperature and pressure. The process demonstrates DPR conversion up to 86%. The reaction product contains high concentrations of valuable monomers such as dimethyldichlorosilane and methyldichlorosilane. A larger DPR hydrogenolysis reactor based on these results is being designed for operation in Europe at Dow Corning`s Barry, Wales site.

  20. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of...

  1. Thermal conversion of biomass to valuable fuels, chemical feedstocks and chemicals

    DOE Patents [OSTI]

    Peters, William A. (Lexington, MA); Howard, Jack B. (Winchester, MA); Modestino, Anthony J. (Hanson, MA); Vogel, Fredreric (Villigen PSI, CH); Steffin, Carsten R. (Herne, DE)

    2009-02-24T23:59:59.000Z

    A continuous process for the conversion of biomass to form a chemical feedstock is described. The biomass and an exogenous metal oxide, preferably calcium oxide, or metal oxide precursor are continuously fed into a reaction chamber that is operated at a temperature of at least 1400.degree. C. to form reaction products including metal carbide. The metal oxide or metal oxide precursor is capable of forming a hydrolizable metal carbide. The reaction products are quenched to a temperature of 800.degree. C. or less. The resulting metal carbide is separated from the reaction products or, alternatively, when quenched with water, hydolyzed to provide a recoverable hydrocarbon gas feedstock.

  2. Production

    Broader source: Energy.gov [DOE]

    Algae production R&D focuses on exploring resource use and availability, algal biomass development and improvements, characterizing algal biomass components, and the ecology and engineering of cultivation systems.

  3. Biological production of products from waste gases

    DOE Patents [OSTI]

    Gaddy, James L. (Fayetteville, AR)

    2002-01-22T23:59:59.000Z

    A method and apparatus are designed for converting waste gases from industrial processes such as oil refining, and carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various products, such as organic acids, alcohols, hydrogen, single cell protein, and salts of organic acids by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified.

  4. Evaluation of residual shale oils as feedstocks for valuable carbon materials

    SciTech Connect (OSTI)

    Fei, You Qing; Derbyshire, F. [Univ. of Kentucky, Lexington, KY (United States)

    1995-12-31T23:59:59.000Z

    Oil shale represents one of the largest fossil fuel resources in the US and in other pans of the world. Beginning in the 1970s until recently, there was considerable research and development activity directed primarily to technologies for the production of transportation fuels from oil shale. Due to the low cost of petroleum, as with other alternate fuel strategies, oil shale processing is not economically viable at present. However, future scenarios can be envisaged in which non-petroleum resources may be expected to contribute to the demand for hydrocarbon fuels and chemicals, with the expectation that process technologies can be rendered economically attractive. There is potential to improve the economics of oil shale utilization through broadening the spectrum of products that can be derived from this resource, and producing added-value materials that are either unavailable or more difficult to produce from other sources. This concept is by no means original. The history of oil shale development shows that most attempts to commercialize oil shale technology have relied upon the marketing of by-products. Results are presented on carbonization and the potential for generating a pitch that could serve as a precursur material.

  5. Selective oxidation of alkanes and/or alkenes to valuable oxygenates

    DOE Patents [OSTI]

    Lin, Manhua (Maple Glen, PA); Pillai, Krishnan S. (North Brunwick, NJ)

    2011-02-15T23:59:59.000Z

    A catalyst, its method of preparation and its use for producing at least one of methacrolein and methacrylic acid, for example, by subjecting isobutane or isobutylene or a mixture thereof to a vapor phase catalytic oxidation in the presence of air or oxygen. In the case where isobutane alone is subjected to a vapor phase catalytic oxidation in the presence of air or oxygen, the product is at least one of isobutylene, methacrolein and methacrylic acid. The catalyst comprises a compound having the formula A.sub.aB.sub.bX.sub.xY.sub.yZ.sub.zO.sub.o wherein A is one or more elements selected from the group of Mo, W and Zr, B is one or more elements selected from the group of Bi, Sb, Se, and Te, X is one or more elements selected from the group of Al, Bi, Ca, Ce, Co, Fe, Ga, Mg, Ni, Nb, Sn, W and Zn, Y is one or more elements selected from the group of Ag, Au, B, Cr, Cs, Cu, K, La, Li, Mg, Mn, Na, Nb, Ni, P, Pb, Rb, Re, Ru, Sn, Te, Ti, V and Zr, and Z is one or more element from the X or Y groups or from the following: As, Ba, Pd, Pt, Sr, or mixtures thereof, and wherein a=1, 0.05

  6. Replacing Valuable Papers.

    E-Print Network [OSTI]

    Anoymous,

    1982-01-01T23:59:59.000Z

    Resources; Austin, Texas 78701; (512)441-3355; cost $3. For out-of-state or country, obtain a copy of: Where to Write for Birth and Death Records - U.S. and Outlying Areas. HE 20.6202 B53/978 or Where to Write for Birth and Death Certificates of U.... For Mastercharge, Visa, American Express or oil company credit cards, contact a bank or service station which handles new applications for the cor rect address. Birth certificates For births in Texas: Bureau of Vital Statistics; Texas Department of Health...

  7. Panel data analysis of U.S. coal productivity

    E-Print Network [OSTI]

    Stoker, Thomas M.

    2000-01-01T23:59:59.000Z

    We analyze labor productivity in coal mining in the United States using indices of productivity change associated with the concepts of panel data modeling. This approach is valuable when there is extensive heterogeneity ...

  8. The European Solar Radiation Atlas 1 Page J., M. Albuisson, L. Wald, 2001. The European solar radiation atlas: a valuable digital tool. Solar Energy,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The European Solar Radiation Atlas 1 Page J., M. Albuisson, L. Wald, 2001. The European solar radiation atlas: a valuable digital tool. Solar Energy, 71, 81-83, 2001.1 The European Solar Radiation Atlas European Solar Radiation Atlas (ESRA) is now available. It is published by Les Presses de l'Ecole des Mines

  9. Open source intelligence (OSINT) has long been a valuable com-modity to ethical penetration testers and malicious hackers alike, but re-

    E-Print Network [OSTI]

    Stanley, Kenneth O.

    Open source intelligence (OSINT) has long been a valuable com- modity to ethical penetration testers and malicious hackers alike, but re- cent high-profile attacks and breaches has moved OSINT even a penetration test and the goals of such an engagement. We will then focus on how OSINT about the target

  10. "the most valuable birds in the world": International Conservation Science and the Revival of Peru's Guano Industry, 1909-1965

    E-Print Network [OSTI]

    Cushman, Gregory T.

    2005-01-01T23:59:59.000Z

    of the most arid, least productive natural environments in the world. This dryness inhibits both the microbiological breakdown of uric acid (C5H4N3O3) and the leaching of water-soluble ammonia (NH3) and ammonium salts (NH4 +) from guano deposits and makes... under his command. Farmers also received propaganda and scientific studies from CAG that promoted scientific agriculture, including a monthly illustrated Boletín (1925– 1967). These publications provided a vital public outlet for scientific research...

  11. Information Technology and Productivity: A Review of the Literature

    E-Print Network [OSTI]

    Information Technology and Productivity: A Review of the Literature Erik Brynjolfsson Shinkyu Yang for numerous valuable comments. #12;Information Technology and Productivity: A Review of the Literature Erik) and productivity became a source of debate: the astonishing improvements in computers' underlying capabilities

  12. Biological production of ethanol from waste gases with Clostridium ljungdahlii

    DOE Patents [OSTI]

    Gaddy, James L. (Fayetteville, AR)

    2000-01-01T23:59:59.000Z

    A method and apparatus for converting waste gases from industrial processes such as oil refining, carbon black, coke, ammonia, and methanol production, into useful products is disclosed. The method includes introducing the waste gases into a bioreactor where they are fermented to various product, such as organic acids, alcohols H.sub.2, SCP, and salts of organic acids by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified.

  13. New Synthetic Methods for Hypericum Natural Products

    SciTech Connect (OSTI)

    Insik Jeon

    2006-12-12T23:59:59.000Z

    Organic chemistry has served as a solid foundation for interdisciplinary research areas, such as molecular biology and medicinal chemistry. An understanding of the biological activities and structural elucidations of natural products can lead to the development of clinically valuable therapeutic options. The advancements of modern synthetic methodologies allow for more elaborate and concise natural product syntheses. The theme of this study centers on the synthesis of natural products with particularly challenging structures and interesting biological activities. The synthetic expertise developed here will be applicable to analog syntheses and to other research problems.

  14. Production of bioenergy and biochemicals from industrial and

    E-Print Network [OSTI]

    Angenent, Lars T.

    and agricultural wastewater, includ- ing methanogenic anaerobic digestion, biological hydro- gen production on wastewater treatment from pollution control to resource exploitation. Many bioprocesses can provide bioenergy. Recovery of energy and valuable materials might reduce the cost of wastewater treatment, and somewhat

  15. Proceedings of the Seventh Walnut Council Research Symposium 15GTR-NRS-P-115 BIOREFINERY OPPORTUNITIES FOR FOREST PRODUCTS INDUSTRIES

    E-Print Network [OSTI]

    capabilities to succeed with biorefineries. Most forest products companies already have the first capability the acquisition of woody residues for making new products while minimizing competition for valuable timber companies to look at the overall biorefinery effort and acquire the expertise to move thermal

  16. Research Summary Wild Harvests Social, cultural and economic values of non-timber forest products

    E-Print Network [OSTI]

    Research Summary Wild Harvests ­ Social, cultural and economic values of non-timber forest products Scottish woodlands have special importance for people who visit them to harvest wild plant material) but the amount harvested or sold was limited wild plant material and fungi as a valuable and joyful by the manual

  17. Greenhouse gas emissions in biogas production systems

    E-Print Network [OSTI]

    Dittert, Klaus; Senbayram, Mehmet; Wienforth, Babette; Kage, Henning; Muehling, Karl H

    2009-01-01T23:59:59.000Z

    biogas waste) remain after fermentation which may serve as valuable nutrient source for agricultural

  18. CX-000734: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    CX-000734: Categorical Exclusion Determination Detection and Production of Methane Hydrates CX(s) Applied: A9 Date: 01222010 Location(s): Stillwater, Oklahoma Office(s):...

  19. CX-000733: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    CX-000733: Categorical Exclusion Determination Detection and Production of Methane Hydrates CX(s) Applied: A9 Date: 01222010 Location(s): Austin, Texas Office(s): Fossil...

  20. CX-011044: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    CX-011044: Categorical Exclusion Determination High Hydrogen, Low Methane Syngas from Low Ranked Coals for Coal-to-Liquids Production CX(s) Applied: A9 Date: 0910...

  1. CX-011751: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Categorical Exclusion Determination GreenLight Biosciences - Highly Productive Cell-free Bioconversion of Methane CX(s) Applied: B3.6 Date: 12122013 Location(s):...

  2. CX-003164: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Categorical Exclusion Determination CX-003164: Categorical Exclusion Determination Optimization of Biomass Production Across a Landscape CX(s) Applied: A9 Date: 07262010...

  3. Product Demonstrations

    Broader source: Energy.gov [DOE]

    The Consortium will pursue a number of demonstrations following the general procedure used by DOE's GATEWAY demonstration program. Specific products to be featured in a demonstration may be...

  4. Hydrogen Production

    Fuel Cell Technologies Publication and Product Library (EERE)

    This 2-page fact sheet provides a brief introduction to hydrogen production technologies. Intended for a non-technical audience, it explains how different resources and processes can be used to produ

  5. RMOTC - Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    on maximizing the value of the NPR-3 site and will continue with its Production Optimization Projects. NPR-3 includes 9,481 acres with more than 400 oil-producing wells....

  6. Coal combustion products: trash or treasure?

    SciTech Connect (OSTI)

    Hansen, T.

    2006-07-15T23:59:59.000Z

    Coal combustion by-products can be a valuable resource to various industries. The American Coal Ash Association (ACAA) collects data on production and uses of coal combustion products (CCPs). 122.5 million tons of CCPs were produced in 2004. The article discusses the results of the ACCA's 2004 survey. Fly ash is predominantly used as a substitute for Portland cement; bottom ash for structural fill, embankments and paved road cases. Synthetic gypsum from the FGD process is commonly used in wallboard. Plant owners are only likely to have a buyer for a portion of their CCPs. Although sale of hot water (from Antelope Valley Station) from condensers for use in a fish farm to raise tilapia proved unviable, the Great Plains Synfuels Plant which manufactures natural gas from lignite produces a wide range of products including anhydrous ammonia, phenol, krypton, carbon dioxide (for enhanced oil recovery), tar oils and liquid nitrogen. ACCA's goal is to educate people about CCPs and how to make them into useful products, and market them, in order to reduce waste disposal and enhance revenue. The article lists members of the ACCA. 2 photos., 1 tab.

  7. Aerosol Best Estimate Value-Added Product

    SciTech Connect (OSTI)

    Flynn, C; Turner, D; Koontz, A; Chand, D; Sivaraman, C

    2012-07-19T23:59:59.000Z

    The objective of the Aerosol Best Estimate (AEROSOLBE) value-added product (VAP) is to provide vertical profiles of aerosol extinction, single scatter albedo, asymmetry parameter, and Angstroem exponents for the atmospheric column above the Central Facility at the ARM Southern Great Plains (SGP) site. We expect that AEROSOLBE will provide nearly continuous estimates of aerosol optical properties under a range of conditions (clear, broken clouds, overcast clouds, etc.). The primary requirement of this VAP was to provide an aerosol data set as continuous as possible in both time and height for the Broadband Heating Rate Profile (BBHRP) VAP in order to provide a structure for the comprehensive assessment of our ability to model atmospheric radiative transfer for all conditions. Even though BBHRP has been completed, AEROSOLBE results are very valuable for environmental, atmospheric, and climate research.

  8. The Production of Active Nitrogen in the Soil.

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach)

    1908-01-01T23:59:59.000Z

    together are taken, the differences are much smaller. If oitrates are much more valuable to plants than ammonia, these differences are very important; but if there is little difference in the value of the two, soils do not vary greatly in their power... ordx. The nitrifying power of all the soils which were probably acid were low; the limed sodium nitrate soil had a much greater ability of converting cottonseed meal into nitrates than the others. We did no' study the production of ammonia...

  9. Consumer Products

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power Administration would likeConstitution And Bylaws | National Nuclearmarkconsumer-products

  10. Nulljob product

    SciTech Connect (OSTI)

    Hughart, N.; Ritchie, D.

    1987-08-01T23:59:59.000Z

    The ever increasing demand for more CPU cycles for data analysis on the authors' Central VAX Cluster led them to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

  11. NULLJOB product

    SciTech Connect (OSTI)

    Hughart, N.; Ritchie, D.

    1987-05-01T23:59:59.000Z

    The ever increasing demand for more CPU cycles for data analysis on our Central VAX Cluster led us to investigate new ways to utilize more fully the resources that were available. A review of the experiment and software development VAX systems on site revealed many unused computing cycles. Furthermore, these systems were all connected by DECnet which would allow easy file transfer and remote batch job submission. A product was developed to allow jobs to be submitted on the Central VAX Cluster but actually to be run on one of the remote systems. The processing of the jobs was arranged, to the greatest extent possible, to be transparent to the user and to have minimal impact on both the Central VAX Cluster and remote systems.

  12. Language Production General Points about Speech Production

    E-Print Network [OSTI]

    Coulson, Seana

    Language Production #12;General Points about Speech Production 15 speech sounds per second => 2, shall I say `t' or `d'' (Levelt) Production side has gotten less attention in Psycholinguistics than the comprehension side. Evidence for speech production behaviour has until recently relied heavily on speech errors

  13. Potential for by-product recovery in geothermal energy operations issue paper

    SciTech Connect (OSTI)

    None

    1982-07-01T23:59:59.000Z

    This document identifies and discusses the significant issues raised by the idea of recovering useful by-products from wastes (primarily spent brine) generated during geothermal power production. The physical availability of numerous valuable materials in geothermal brines has captured the interest of geothermal resource developers and other parties ever since their presence was known. The prospects for utilizing huge volumes of highly-saline geothermal brines for electricity generation in the Imperial Valley of California have served to maintain this interest in both private sector and government circles.

  14. Drell-Yan Production at Threshold to Third Order in QCD

    E-Print Network [OSTI]

    Taushif Ahmed; Maguni Mahakhud; Narayan Rana; V. Ravindran

    2014-12-11T23:59:59.000Z

    The recent computation on the full threshold contributions to Higgs boson production at next-to-next-to-next-to-leading order (N$^3$LO) in QCD contains valuable information on the soft gluons resulting from virtual and real emission partonic subprocesses. We use those from the real emissions to obtain the corresponding soft gluon contributions to Drell-Yan production and determine the missing $\\delta(1-z)$ part of the N$^3$LO. The numerical impact of threshold effects demonstrates the importance of our results in the precision study with the Drell-Yan process at the LHC.

  15. Biological production of acetic acid from waste gases with Clostridium ljungdahlii

    DOE Patents [OSTI]

    Gaddy, James L. (Fayetteville, AR)

    1998-01-01T23:59:59.000Z

    A method and apparatus for converting waste gases from industrial processes such as oil refining, carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various organic acids or alcohols by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified. In an exemplary recovery process, the bioreactor raffinate is passed through an extraction chamber into which one or more non-inhibitory solvents are simultaneously introduced to extract the product. Then, the product is separated from the solvent by distillation. Gas conversion rates can be maximized by use of centrifuges, hollow fiber membranes, or other means of ultrafiltration to return entrained anaerobic bacteria from the bioreactor raffinate to the bioreactor itself, thus insuring the highest possible cell concentration.

  16. Biological production of acetic acid from waste gases with Clostridium ljungdahlii

    DOE Patents [OSTI]

    Gaddy, J.L.

    1998-09-15T23:59:59.000Z

    A method and apparatus are disclosed for converting waste gases from industrial processes such as oil refining, carbon black, coke, ammonia, and methanol production, into useful products. The method includes introducing the waste gases into a bioreactor where they are fermented to various organic acids or alcohols by anaerobic bacteria within the bioreactor. These valuable end products are then recovered, separated and purified. In an exemplary recovery process, the bioreactor raffinate is passed through an extraction chamber into which one or more non-inhibitory solvents are simultaneously introduced to extract the product. Then, the product is separated from the solvent by distillation. Gas conversion rates can be maximized by use of centrifuges, hollow fiber membranes, or other means of ultrafiltration to return entrained anaerobic bacteria from the bioreactor raffinate to the bioreactor itself, thus insuring the highest possible cell concentration. 5 figs.

  17. Isotope Science and Production

    E-Print Network [OSTI]

    Isotope Science and Production 35 years of experience in isotope production, processing, and applications. Llllll Committed to the safe and reliable production of radioisotopes, products, and services nuclear materials in trucks and cargo containers. Isotopes for Threat Reduction Isotope production at Los

  18. Covered Product Category: Cool Roof Products

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including cool roof products, which are an ENERGY STAR®-qualified product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  19. from Isotope Production Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cancer-fighting treatment gets boost from Isotope Production Facility April 13, 2012 Isotope Production Facility produces cancer-fighting actinium 2:32 Isotope cancer treatment...

  20. ################### g VM Production Mechanisms

    E-Print Network [OSTI]

    Kai­C. Voss, Bonn University 1 Vector meson production at HERA ############################### ################# ############### ############ #################################### ######################################### ############################ #12; Kai­C. Voss, Bonn University 2 Vector meson production at HERA # ################################################## ############################## ## ####################################### # # ## # ######## ### #### # # #12; Kai­C. Voss, Bonn University 3 Vector meson production at HERA VM Production Mechanisms soft

  1. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization PROPERTIES OF CONCRETE CONTAINING SCRAP TIRE RUBBER in a variety of rubber and plastic products, thermal incineration of waste tires for production of electricity rubber in asphalt mixes, (ii) thermal incineration of worn-out tires for the production of electricity

  2. Meats & Products Agricultural Inputs

    E-Print Network [OSTI]

    Collett Jr., Jeffrey L.

    Meats & Products Agricultural Inputs Processing Idaho B20 C C B Meats and Livestock Products Index to agriculture? Legend Overall weighted grade Weighted rank Northwest Midwest Southwest East Meats & ProductsProcessingessing Maine B11 B A A Meats & Products Agricultural Inputs Processing New York F49 F F F soductsoducts

  3. Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production

    SciTech Connect (OSTI)

    Donal F. Day

    2009-03-31T23:59:59.000Z

    The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of succinic acid production were such that it could not compete with current commercial practice. To allow recovery of commercial amounts of ethanol from bagasse fermentation, research was conducted on high solids loading fermentations (using S. cerevisiae) with commercial cellulase on pretreated material. A combination of SHF/SSF treatment with fed-batch operation allowed fermentation at 30% solids loading. Supplementation of the fermentation with a small amount of black-strap molasses had results beyond expectation. There was an enhancement of conversion as well as production of ethanol levels above 6.0% w/w, which is required both for efficient distillation as well as contaminant repression. The focus of fermentation development was only on converting the cellulose to ethanol, as this yeast is not capable of fermenting both glucose and xylose (from hemicellulose). In anticipation of the future development of such an organism, we screened the commercially available xylanases to find the optimum mix for conversion of both cellulose and hemicellulose. A different mixture than the spezyme/novozyme mix used in our fermentation research was found to be more efficient at converting both cellulose and hemicellulose. Efforts were made to select a mutant of Pichia stipitis for ability to co-ferment glucose and xylose to ethanol. New mutation technology was developed, but an appropriate mutant has not yet been isolated. The ability to convert to stillage from biomass fermentations were determined to be suitable for anaerobic degradation and methane production. An economic model of a current sugar factory was developed in order to provide a baseline for the cost/benefit analysis of adding cellulosic ethanol production.

  4. New CMI process recycles valuable rare earth metals from old...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    behind. Then the rare earths are recovered from the magnesium through vacuum distillation. In the second step, another material is used to bind with and extract the heavier...

  5. Vertical seismic profiling technique emerges as a valuable drilling tool

    SciTech Connect (OSTI)

    Roberts, R.J.; Platt, J.D.

    1984-03-19T23:59:59.000Z

    The new downhole measurement technique known as vertical seismic profiling entails lowering a geophone down ahead of the bit to acquire data on the well pressure and to determine (in strata not yet drilled) the depth to formation tops, the compaction curves, and the hardness of the rock. The basic VSP provides data useful in surface seismic interpretation, formation evaluation, and onsite decision making for the drilling program.

  6. Continuous Commissioning: A Valuable Partner to Retrofit Projects

    E-Print Network [OSTI]

    Turner, W. D.; Banks, K.; Athar, A.; Yazdani, B.; Zhu, Y.; Culp, C.

    2001-01-01T23:59:59.000Z

    -hand corner. Prior to commissioning, any changes in the duct static pressure or discharge air temperature setpoints did not affect the VFD speed. The operation of five AHUs was analyzed using the data collected through the EMCS. Table 2 presents summarized... variable frequency drives on constant speed motors and installing/modifying the DDC control system to control and optimize operation and to improve the system efficiency. In most cases, the retrofit projects realize their projected energy savings...

  7. The electrical engineer - our most valuable piece of equipment

    E-Print Network [OSTI]

    Brooks, Morton Palmer

    1952-01-01T23:59:59.000Z

    GIZMO to Qixxain worixatZ38 daga canoe~i gzzn'o deiiirse of real GBOoesa i. s difficalx~ Pk~e degree Xo vhioh Gleoirioal GBZXinesrs QQCSKR Gninenoe in Chair profsssi, on io related &Gael@lax CQ cos zenith 1'fs as 'Mall GS Xo sjiiri~i~ Valnaa ~ ~l..., bhe eleabri@Q. e@iaecr is ~% au@ @milled, sa the bhe~ ~ praebgce cZ 4ae ~X~S ka his AeM ~ ~ gi~CM, 3g ses nb is ~4 bc Ces~ mcbexa en@ Ce ease tJ3e effi~ cg eNeraaborsi He receives practical Cemcasteatkcas S@ yr~ mcvepm and, is @Mea@R m his haewle...

  8. SLIDESHOW: Learning Valuable Lessons About Energy with Scouts...

    Broader source: Energy.gov (indexed) [DOE]

    meter. | Photo by Matty Greene. 9 of 13 A Boy Scout watches light shine on a solar panel, showing how photovoltaic panels work. | Photo by Matty Greene. 10 of 13 Scouts watch...

  9. Electrochemical natural gas conversion to more valuable species

    SciTech Connect (OSTI)

    Kuchynka, D.J.; Cook, R.L.; Fammells, A.F. (Eltron Research, Inc., Aurora, IL (US))

    1991-05-01T23:59:59.000Z

    This paper reports on the electrochemical oxidative dimerization of methane to give C{sub 2} hydrocarbon species investigated in solid oxide fuel cells possessing the general configuration: CH{sub 4}, anode electrocatalyst/ZrO{sub 2}(8 m/o Y{sub 2}O{sub 3})/La{sub 0.9}Sr{sub 0.1}MnO{sub 3}O{sub 2}(air). Perovskite anode electrocatalysts shown to possess activity toward promoting the subject reaction include Sm{sub 0.5}Ce{sub 0.5}CuO{sub 3}, Tb{sub 0.8}Sm{sub 0.2}CuO{sub 3}, Gd{sub 0.9}Th{sub 0.1}CuO{sub 3}, Gd{sub 0.9}Na{sub 0.1}MnO{sub 3}, and Th{sub 0.8}Yb{sub 0.2}NiO{sub 3}. Maximum partial faradaic current densities at active perovskite anode electrocatalysts for promoting the subject reaction were found to be directly correlatable to their calculated oxygen binding energies on the perovskite surface, where increasing binding energies were found to favor higher rates for electrochemical partial methane oxidation. Increasing surface oxygen binding energies at perovskite anode electrocatalysts were found to correlate with increasing perovskite lattice-free volumes with electrochemical measurements, supporting increasing surface oxygen binding energies and perovskite lattice-free volumes as leading to enhanced rates for the subject reaction. As a consequence, synergism was found between experimentally determined perovskite anode electrocatalyst activities, their calculated surface oxygen binding energies, and lattice ionic-free volumes.

  10. Valuable Chemical Produced from Renewables Instead of Petroleum |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment ofPrivilegesUnauthorizedVIAThisValerie

  11. Energy Department Awards $18 Million to Develop Valuable Bioproducts and

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField Campaign:INEAWaterCool RoofsAmerican

  12. SLIDESHOW: Learning Valuable Lessons About Energy with Scouts | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdfBreakingMay 2015 <Department of iiBiodiesel |NY (FebruaryDepartment of

  13. Jimmy Bell's Experience Brings Valuable Input to Federal Advisory Board |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions for DOEtheInspection15 PATRICIAJOINTWashington,Jim Brodrick About

  14. Mississippi State Biodiesel Production Project

    SciTech Connect (OSTI)

    Rafael Hernandez; Todd French; Sandun Fernando; Tingyu Li; Dwane Braasch; Juan Silva; Brian Baldwin

    2008-03-20T23:59:59.000Z

    Biodiesel is a renewable fuel conventionally generated from vegetable oils and animal fats that conforms to ASTM D6751. Depending on the free fatty acid content of the feedstock, biodiesel is produced via transesterification, esterification, or a combination of these processes. Currently the cost of the feedstock accounts for more than 80% of biodiesel production cost. The main goal of this project was to evaluate and develop non-conventional feedstocks and novel processes for producing biodiesel. One of the most novel and promising feedstocks evaluated involves the use of readily available microorganisms as a lipid source. Municipal wastewater treatment facilities (MWWTF) in the USA produce (dry basis) of microbial sludge annually. This sludge is composed of a variety of organisms, which consume organic matter in wastewater. The content of phospholipids in these cells have been estimated at 24% to 25% of dry mass. Since phospholipids can be transesterified they could serve as a ready source of biodiesel. Examination of the various transesterification methods shows that in situ conversion of lipids to FAMEs provides the highest overall yield of biodiesel. If one assumes a 7.0% overall yield of FAMEs from dry sewage sludge on a weight basis, the cost per gallon of extracted lipid would be $3.11. Since the lipid is converted to FAMEs, also known as biodiesel, in the in Situ extraction process, the product can be used as is for renewable fuel. As transesterification efficiency increases the cost per gallon drops quickly, hitting $2.01 at 15.0% overall yield. An overall yield of 10.0% is required to obtain biodiesel at $2.50 per gallon, allowing it to compete with soybean oil in the marketplace. Twelve plant species with potential for oil production were tested at Mississippi State, MS. Of the species tested, canola, rapeseed and birdseed rape appear to have potential in Mississippi as winter annual crops because of yield. Two perennial crops were investigated, Chinese tallow tree and tung tree. High seed yields from these species are possible because, there stature allows for a third dimension in yield (up). Harvest regimes have already been worked out with tung, and the large seed makes shedding of the seed with tree shakers possible. While tallow tree seed yields can be mind boggling (12,000 kg seed/ha at 40% oil), genotypes that shed seed easily are currently not known. Efficient methods were developed to isolate polyunsaturated fatty acid methyl esters from bio-diesel. The hypothesis to isolate this class of fatty acids, which are used as popular dietary supplements and prescription medicine (OMACOR), was that they bind transition metal ions much stronger than their harmful saturated analogs. AgBF4 has the highest extraction ability among all the metal ions tested. Glycerol is a key product from the production of biodiesel. It is produced during the transesterification process by cleaving the fatty acids from the glycerol backbone (the fatty acids are used as part of the biodiesel, which is a fatty acid methyl ester). Glycerol is a non-toxic compound with many uses; however, if a surplus exists in the future, more uses for the produced glycerol needs to be found. Another phase of the project was to find an add-on process to the biodiesel production process that will convert the glycerol by-product into more valuable substances for end uses other than food or cosmetics, focusing at present on 1,3-propanediol and lactic acid.All three MSU cultures produced products at concentrations below that of the benchmark microorganisms. There was one notable isolate the caught the eye of the investigators and that was culture J6 due to the ability of this microorganism to co-produce both products and one in particularly high concentrations. This culture with more understanding of its metabolic pathways could prove a useful biological agent for the conversion of glycerol. Heterogeneous catalysis was examined as an alternative to overcome the disadvantages of homogeneous transesterification, such as the presence of salts in the glycer

  15. Process for the production of fuel gas from coal

    DOE Patents [OSTI]

    Patel, Jitendra G. (Bolingbrook, IL); Sandstrom, William A. (Chicago, IL); Tarman, Paul B. (Elmhurst, IL)

    1982-01-01T23:59:59.000Z

    An improved apparatus and process for the conversion of hydrocarbonaceous materials, such as coal, to more valuable gaseous products in a fluidized bed gasification reaction and efficient withdrawal of agglomerated ash from the fluidized bed is disclosed. The improvements are obtained by introducing an oxygen containing gas into the bottom of the fluidized bed through a separate conduit positioned within the center of a nozzle adapted to agglomerate and withdraw the ash from the bottom of the fluidized bed. The conduit extends above the constricted center portion of the nozzle and preferably terminates within and does not extend from the nozzle. In addition to improving ash agglomeration and withdrawal, the present invention prevents sintering and clinkering of the ash in the fluidized bed and permits the efficient recycle of fine material recovered from the product gases by contacting the fines in the fluidized bed with the oxygen as it emanates from the conduit positioned within the withdrawal nozzle. Finally, the present method of oxygen introduction permits the efficient recycle of a portion of the product gases to the reaction zone to increase the reducing properties of the hot product gas.

  16. Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production

    E-Print Network [OSTI]

    Narasayya, Vivek

    #12;Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward Zero Carbon Energy Production Toward

  17. PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM)

    E-Print Network [OSTI]

    Rzepa, Henry S.

    PRODUCT REPRESENTATION IN LIGHTWEIGHT FORMATS FOR PRODUCT LIFECYCLE MANAGEMENT (PLM) Lian Ding environments and the entire product lifecycle. There are new requirements for product representations, including: platform/application independence, support for the product lifecycle, rapidly sharing information

  18. How "Sustainability" is Changing How We Make and Choose Products

    SciTech Connect (OSTI)

    Cheryl O'Brien

    2006-07-01T23:59:59.000Z

    What does Sustainability mean, and why should people in the thermophysical properties business care? This paper will describe sustainability in the context of product development, which is where much of the buzz is currently being generated. Once described, it will discuss how expectations for Sustainability are changing product lines, and then discuss the controversial issues now emerging from trying to measure Sustainability. One of the most organized efforts in the U.S. is the U.S. Green Building Council revolutionizing how the built environment is conceptualized, designed, built, used, and disposed of - and born again. The appeal of the US Green Building Council is that it has managed to checklist how to "do" Sustainability. By following this checklist, better described as a rating system, a more Sustainable product should be achieved. That is, a product that uses less energy, less water, is less noxious to the user, and consumes fewer resources. We care because these Sustainable products are viewed as preferable by a growing number of consumers and, consequently, are more valuable. One of the most interesting aspects of the Sustainability movement is a quantitative assessment of how sustainable a product is. Life Cycle Assessment techniques (not to be confused with life cycle economic costs) developed since the early 1990s are gaining ground as a less biased method to measure the ultimate "bad" consequences of creating a product (depletion of natural resources, nutrification, acid rain, air borne particulates, solid waste, etc.). For example, one assertion is that these studies have shown that recycling can sometimes do more environmental harm than good.

  19. Water and gas coning: two and three phase system correlations for the critical oil production rate and optimum location of the completion interval

    E-Print Network [OSTI]

    Gonzalez, Francisco Manuel

    1987-01-01T23:59:59.000Z

    ; B. S. , The George Vashington University Chair of Advisory Committee: Dr. Larry D. Piper This work presents an accurate and simple method of estimating the critical oi. l production rate for both two phase (oil-water or oil-gas) and three phase... The author would like to express his sincere appreciation to the following indivi. duels who, by their assistance and valuable suggestions, made this work possible. Professor Larry D. Piper for his guidance in outlining the goals of the project...

  20. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization DRAFT REPORT CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS-MILWAUKEE #12;CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS PRODUCTS Progress Report by Tarun R. Naik, Rakesh of Carbon Dioxide Sequestration Technologies

  1. Increasing productivity: Another approach

    SciTech Connect (OSTI)

    Norton, F.J.

    1996-06-10T23:59:59.000Z

    An engineering information (EI) and information technology (IT) organization that must improve its productivity should work to further its business goals. This paper explores a comprehensive model for increasing EI/IT productivity by supporting organizational objectives.

  2. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    of Wisconsin-Milwaukee Submitted to the Electric Power Research Institute August 2009 UWM Center for By-Products-Strength Materials) for help in reducing global warming. Concrete mixtures having slump in the range of three to fourCenter for By-Products Utilization CARBON DIOXIDE SEQUESTRATION IN CEMENTITIOUS PRODUCTS By Tarun R

  3. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    combustion by-products #12;3 generated by using both conventional and clean-coal technologies. A clean-coal that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocksCenter for By-Products Utilization RECENT ADVANCES IN RECYCLING CLEAN- COAL ASH By Tarun R. Naik

  4. Half-Product Codes

    E-Print Network [OSTI]

    Emmadi, Santosh Kumar

    2014-12-11T23:59:59.000Z

    A class of codes, half-product codes, derived from product codes, is characterized. These codes have the implementation advantages of product codes and possess a special structural property which leads them to have larger (at least 3/2 times more...

  5. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    of coal fly ash, coal bottom ash, and used foundry sand in concrete, bricks, blocks, and8 paving stones, Wisconsin. She is involved in management,11 disposal, and sale of coal-combustion by-products. She alsoCenter for By-Products Utilization UNDER-UTILIZED COAL-COMBUSTION PRODUCTS IN PERMEABLE ROADWAY

  6. MAIL DISTRIBUTION MAIL PRODUCTION

    E-Print Network [OSTI]

    MAIL DISTRIBUTION AND MAIL PRODUCTION OPERATIONS GUIDE November 07 Revised November 07 #12;2 Mail/billing......................................................................................1-5346 Mail Production of the University non-profit permit. 3. All bulk mailings must be coordinated with Mail Production at the earliest

  7. Strangeness Production at COSY

    E-Print Network [OSTI]

    Frank Hinterberger; Hartmut Machner; Regina Siudak

    2010-10-08T23:59:59.000Z

    The paper gives an overview of strangeness-production experiments at the Cooler Synchrotron COSY. Results on kaon-pair and phi meson production in pp, pd and dd collisions, hyperon-production experiments and Lambda p final-state interaction studies are presented.

  8. Success Story Production of

    E-Print Network [OSTI]

    Success Story Production of Chemicals from Biologically Derived Succinic Acid (BDSA) The BDSA, automobile bumpers, and an array of other industrial and consumer products. Known as the BDSA (Biologically it as a platform chemical to produce 1,4-butanediol (BDO) and related products, tetrahydrofuran and - butyrolactone

  9. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST OF CLASS F FLYASHAND CLEAN-COAL ASHBLENDS FOR CAST CONCRETE PRODUCTS Authors: TarunR.Naik, Director, Center,Illinois Clean Coal Institute RudolphN.Kraus, Research Associate, UWM Center forBy-Products Utilization Shiw S

  10. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization USE OF COAL-COMBUSTION PRODUCTS IN PERMEABLE PAVEMNET BASE and Published at the Raymundo Rivera International Symposium on Durability of Concrete, Monterrey, N. L., Mexico THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;Use of Coal-Combustion Products in Permeable Pavement Base1 2 3 4 5 6 7

  11. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -fired power plants derive energy by burning coal in their furnaces. These power plants generally use either. The by-product materials include coal combustion by-products, wood ash, pulp and paper industry by recycling and research needs are discussed. #12;3 2.0 MATERIALS 2.1 COAL-COMBUSTION BY-PRODUCTS Coal

  12. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    combustion by-products (such as clean-coal ash) from power plants. Maximum recycling of such by- products regulations and increasing use of low-grade coal, the number of coal-fired power plants with flue gasCenter for By-Products Utilization USE OF CLEAN-COAL ASH FOR MANAGING ASR By Zichao Wu and Tarun R

  13. Coal production 1989

    SciTech Connect (OSTI)

    Not Available

    1990-11-29T23:59:59.000Z

    Coal Production 1989 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, reserves, and stocks to a wide audience including Congress, federal and state agencies, the coal industry, and the general public. 7 figs., 43 tabs.

  14. MECO Production Target Developments

    E-Print Network [OSTI]

    McDonald, Kirk

    be reoptimized Tungsten target Simulations of design parameters with GEANT3 indicate that both production targetMECO Production Target Developments James L. Popp University of California, Irvine NuFact'03 Columbia, June, 2003 #12;June, 2003J.L.Popp, UCI MECO Production Target 2 MECO Collaboration Institute

  15. CX-010442: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hyper Scratcher Tool: A Patented Oil, Gas, Disposal, & Injection Well Tool for Enhancing Production... CX(s) Applied: B3.7 Date: 06/19/2013 Location(s): California Offices(s): National Energy Technology Laboratory

  16. CX-009557: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Recycling of Nutrients and Water in Algal Biofuels Production CX(s) Applied: A9, B3.6 Date: 12/10/2012 Location(s): California Offices(s): Golden Field Office

  17. CX-011103: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Scale-up of Algal Biofuel Production Using Waste Nutrients CX(s) Applied: A9 Date: 08/29/2013 Location(s): California Offices(s): Golden Field Office

  18. CX-011042: Categorical Exclusion Determination | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    CX-011042: Categorical Exclusion Determination High Hydrogen, Low Methane Syngas from Low Ranked Coals for Coal-to-Liquids Production CX(s) Applied: B3.6 Date: 0910...

  19. CX-012033: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Field Demonstration of a Novel Eco-Friendly Production Enhancement Process CX(s) Applied: A9, A11, B3.6 Date: 04/15/2014 Location(s): CX: none Offices(s): National Energy Technology Laboratory

  20. CX-012034: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Field Demonstration of a Novel Eco-Friendly Production Enhancement Process CX(s) Applied: A9, A11, B3.7 Date: 04/15/2014 Location(s): Texas Offices(s): National Energy Technology Laboratory

  1. CX-012035: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Field Demonstration of a Novel Eco-Friendly Production Enhancement Process CX(s) Applied: A9, A11, B3.7 Date: 04/15/2014 Location(s): Texas Offices(s): National Energy Technology Laboratory

  2. CX-012444: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Geomechanical Monitoring for CO2 Hub Storage: Production and Injection at Kevin Dome CX(s) Applied: A9Date: 41878 Location(s): CaliforniaOffices(s): National Energy Technology Laboratory

  3. CX-012438: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Geomechanical Monitoring for CO2 Hub Storage: Production and Injection at Kevin Dome CX(s) Applied: A1, A9Date: 41878 Location(s): MontanaOffices(s): National Energy Technology Laboratory

  4. CX-011732: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    SRI International -Direct Low-Cost Production of Titanium Alloys CX(s) Applied: B3.6 Date: 12/05/2013 Location(s): California Offices(s): Advanced Research Projects Agency-Energy

  5. CX-008967: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara… CX(s) Applied: B3.1 Date: 08/02/2012 Location(s): South Dakota Offices(s): National Energy Technology Laboratory

  6. CX-008972: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara… CX(s) Applied: B3.6 Date: 08/01/2012 Location(s): South Dakota Offices(s): National Energy Technology Laboratory

  7. CX-008971: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara.. CX(s) Applied: A9 Date: 08/01/2012 Location(s): Virginia Offices(s): National Energy Technology Laboratory

  8. CX-008975: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara… CX(s) Applied: B3.1 Date: 08/01/2012 Location(s): South Dakota Offices(s): National Energy Technology Laboratory

  9. CX-008974: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara… CX(s) Applied: B3.1 Date: 08/01/2012 Location(s): South Dakota Offices(s): National Energy Technology Laboratory

  10. CX-008968: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Multi-Phase Fluid Flow Simulation Assisted Exploration and Production of Hydrocarbons from Niobrara… CX(s) Applied: B3.1 Date: 08/02/2012 Location(s): South Dakota Offices(s): National Energy Technology Laboratory

  11. CX-009383: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hybrid Rotor Compression for Multiphase and Liquids-Rich Wellhead Production Applications (Summary CX) CX(s) Applied: A9, B3.6 Date: 09/14/2012 Location(s): Multiple Offices(s): National Energy Technology Laboratory

  12. CX-011483: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Bioprocessing for Bioremediation and Energy Production CX(s) Applied: B3.6 Date: 11/06/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  13. CX-009846: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Petrophysics/Tight Rock Characterization for Improved Stimulation and Production Technology in Shales CX(s) Applied: A9, B3.6 Date: 01/30/2013 Location(s): Alabama Offices(s): National Energy Technology Laboratory

  14. CX-011737: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Gas Technology Institute - Dual Electrolyte Extraction Electro-Refinery for Aluminum Production CX(s) Applied: B3.6 Date: 10/23/2013 Location(s): Illinois Offices(s): Advanced Research Projects Agency-Energy

  15. CX-011043: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    High Hydrogen, Low Methane Syngas from Low Ranked Coals for Coal-to-Liquids Production CX(s) Applied: A9 Date: 09/10/2013 Location(s): Maryland Offices(s): National Energy Technology Laboratory

  16. CX-010626: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Investigate Production of Commodity Chemicals using Carbon Dioxide and Carbon Feedstocks Including Methane CX(s) Applied: A9, B3.6 Date: 07/12/2013 Location(s): North Carolina Offices(s): National Energy Technology Laboratory

  17. CX-011020: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Low Cost High-H2 Syngas Production for Power and Liquid Fuels CX(s) Applied: B3.6 Date: 09/11/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory

  18. CX-010960: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Chemical Looping Gasification for Hydrogen Enhanced Syngas Production with In-Situ Carbon Dioxide (CO2) Capture CX(s) Applied: A9 Date: 09/16/2013 Location(s): Pennsylvania Offices(s): National Energy Technology Laboratory

  19. CX-012460: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Technology for Greenhouse Gas Emission Reduction & Cost Competitiveness of Mil-Spec Jet Fuel Production Using CTL CX(s) Applied: B3.6Date: 41877 Location(s): AlabamaOffices(s): National Energy Technology Laboratory

  20. CX-012462: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Technology for Greenhouse Gas Emission Reduction & Cost Competitiveness of Mil-Spec Jet Fuel Production Using CTL CX(s) Applied: B3.6Date: 41877 Location(s): UtahOffices(s): National Energy Technology Laboratory

  1. CX-012404: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advancing Coal Catalytic Gasification to Promote Optimum Syngas Production CX(s) Applied: B3.6Date: 41884 Location(s): UtahOffices(s): National Energy Technology Laboratory

  2. CX-012295: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hyper Scratcher Tool: A Patented Oil, Gas, Disposal, & Injection Well Tool for Enhancing Production CX(s) Applied: B3.7 Date: 06/03/2014 Location(s): Michigan Offices(s): National Energy Technology Laboratory

  3. CX-012296: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hyper Scratcher Tool: A Patented Oil, Gas, Disposal, & Injection Well Tool for Enhancing Production CX(s) Applied: B3.7 Date: 06/03/2014 Location(s): Michigan Offices(s): National Energy Technology Laboratory

  4. CX-007717: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Arcadia Biosciences, Inc. - Vegetative Production of Oil in a C4 Crop CX(s) Applied: B3.6 Date: 11/21/2011 Location(s): California Offices(s): Advanced Research Projects Agency-Energy

  5. CX-010216: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Design and Optimization of a Biochemical Production Platform with Biosensor-guided Synthetic Evolution CX(s) Applied: A9, B3.6 Date: 02/28/2013 Location(s): California Offices(s): Golden Field Office

  6. CX-010937: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hybrid Molten Bed Gasifier for Production of High Hydrogen Syngas CX(s) Applied: A9 Date: 09/17/2013 Location(s): California Offices(s): National Energy Technology Laboratory

  7. CX-010936: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Hybrid Molten Bed Gasifier for Production of High Hydrogen Syngas CX(s) Applied: A9, B3.6 Date: 09/17/2013 Location(s): Illinois Offices(s): National Energy Technology Laboratory

  8. CX-012459: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Design/Cost Study and Commercialization Analysis for Synthetic Jet Fuel Production CX(s) Applied: A8, A9, A11Date: 41877 Location(s): PennsylvaniaOffices(s): National Energy Technology Laboratory

  9. CX-012452: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Design/Cost Study and Commercialization Analysis for Synthetic Jet Fuel Production CX(s) Applied: A8, A9, A11Date: 41877 Location(s): New JerseyOffices(s): National Energy Technology Laboratory

  10. CX-009845: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Petrophysics/Tight Rock Characterization for Improved Stimulation and Production Technology in Shales CX(s) Applied: A9, B3.6 Date: 01/30/2013 Location(s): Oklahoma Offices(s): National Energy Technology Laboratory

  11. CX-009844: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Petrophysics/Tight Rock Characterization for Improved Stimulation and Production Technology in Shales CX(s) Applied: A9, B3.6 Date: 01/30/2013 Location(s): Alabama Offices(s): National Energy Technology Laboratory

  12. Categorical Exclusion Determinations: National Energy Technology...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Exclusion Determination Advancing Coal Catalytic Gasification to Promote Optimum Syngas Production CX(s) Applied: B3.6 Date: 41884 Location(s): Utah Offices(s): National...

  13. CX-010491: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Sludge Batch 8 (SB8) Waste Acceptance Product Specifications (WAPS) CX(s) Applied: B3.6 Date: 05/21/2013 Location(s): South Carolina Offices(s): Savannah River Operations Office

  14. CX-010235: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Large-Scale Production of Fuels and Feed from Marine Microalgae CX(s) Applied: A9, B3.6 Date: 02/14/2013 Location(s): New York Offices(s): Golden Field Office

  15. CX-012427: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Alaska Hydrate Production Testing: Test Site Selection and Characterization CX(s) Applied: A1, A9Date: 41879 Location(s): ColoradoOffices(s): National Energy Technology Laboratory

  16. Product development practices that matter

    E-Print Network [OSTI]

    Gupta, Nisheeth

    2010-01-01T23:59:59.000Z

    Product Development consists of activities to transforms a market opportunity and technological innovation into successful products. Several waves of improvements in technological innovation and product development have ...

  17. Multi-Period Production Capacity Planning for Integrated Product and Production System Design*

    E-Print Network [OSTI]

    Saitou, Kazuhiro "Kazu"

    Multi-Period Production Capacity Planning for Integrated Product and Production System Design* Emre.ac.uk kazu@umich.edu .Abstract ­ This paper presents a simulation-based method to aid multi-period production capacity planning by quantifying the trade-off between product quality and production cost. The product

  18. Relaxations for Production Planning Problems with Increasing By-products

    E-Print Network [OSTI]

    Sheridan, Jennifer

    Relaxations for Production Planning Problems with Increasing By-products Srikrishna Sridhar, Jeff, James Leudtke SILO Seminars: Feb 1, 2012 #12;One slide summary Problem Description Production process involves desirable & undesirable products. Srikrishna Sridhar, Jeff Linderoth, James Leudtke SILO Seminars

  19. Coal Production 1992

    SciTech Connect (OSTI)

    Not Available

    1993-10-29T23:59:59.000Z

    Coal Production 1992 provides comprehensive information about US coal production, the number of mines, prices, productivity, employment, productive capacity, and recoverable reserves to a wide audience including Congress, Federal and State agencies, the coal industry, and the general public. In 1992, there were 3,439 active coal mining operations made up of all mines, preparation plants, and refuse operations. The data in Table 1 cover the 2,746 mines that produced coal, regardless of the amount of production, except for bituminous refuse mines. Tables 2 through 33 include data from the 2,852 mining operations that produced, processed, or prepared 10 thousand or more short tons of coal during the period, except for bituminous refuse, and includes preparation plants with 5 thousand or more employee hours. These mining operations accounted for over 99 percent of total US coal production and represented 83 percent of all US coal mining operations in 1992.

  20. Unit II-1 Inner products 1 Inner product and

    E-Print Network [OSTI]

    Birkett, Stephen

    Unit II-1 Inner products 1 Unit II-1 Inner product and orthogonality Unit II-1 Inner products 2 Real inner product · V is a real vector space · for u,vV define a scalar satisfying: linear: symmetric: positive definite: · is called an inner product of u and v · V with an inner product defined is called

  1. Understanding and Improving Software Productivity

    E-Print Network [OSTI]

    Scacchi, Walt

    Understanding and Improving Software Productivity Walt Scacchi Institute for Software Research;2 Introduction · What affects software productivity? ­ Software productivity has been one of the most studied aspects of software engineering ­ Goal: review sample of empirical studies of software productivity

  2. Furfuryl alcohol cellular product

    DOE Patents [OSTI]

    Sugama, T.; Kukacka, L.E.

    1982-05-26T23:59:59.000Z

    Self-extinguishing rigid foam products are formed by polymerization of furfuryl alcohol in the presence of a lightweight, particulate, filler, zinc chloride and selected catalysts.

  3. Microsystem product development.

    SciTech Connect (OSTI)

    Polosky, Marc A.; Garcia, Ernest J.

    2006-04-01T23:59:59.000Z

    Over the last decade the successful design and fabrication of complex MEMS (MicroElectroMechanical Systems), optical circuits and ASICs have been demonstrated. Packaging and integration processes have lagged behind MEMS research but are rapidly maturing. As packaging processes evolve, a new challenge presents itself, microsystem product development. Product development entails the maturation of the design and all the processes needed to successfully produce a product. Elements such as tooling design, fixtures, gages, testers, inspection, work instructions, process planning, etc., are often overlooked as MEMS engineers concentrate on design, fabrication and packaging processes. Thorough, up-front planning of product development efforts is crucial to the success of any project.

  4. Sustainable hydrogen production

    SciTech Connect (OSTI)

    Block, D.L.; Linkous, C.; Muradov, N.

    1996-01-01T23:59:59.000Z

    This report describes the Sustainable Hydrogen Production research conducted at the Florida Solar Energy Center (FSEC) for the past year. The report presents the work done on the following four tasks: Task 1--production of hydrogen by photovoltaic-powered electrolysis; Task 2--solar photocatalytic hydrogen production from water using a dual-bed photosystem; Task 3--development of solid electrolytes for water electrolysis at intermediate temperatures; and Task 4--production of hydrogen by thermocatalytic cracking of natural gas. For each task, this report presents a summary, introduction/description of project, and results.

  5. Electromagnetic Higgs production

    E-Print Network [OSTI]

    J. S. Miller

    2007-11-13T23:59:59.000Z

    The cross section for central diffractive Higgs production is calculated, for the LHC range of energies. The graphs for the possible mechanisms for Higgs production, through pomeron fusion and photon fusions are calculated for all possibilities allowed by the standard model. The cross section for central diffractive Higgs production through pomeron fusion, must be multiplied by a factor for the survival probability, to isolate the Higgs signal and reduce the background. Due to the small value of the survival probability $\\Lb 4 \\times 10^{-3}\\Rb $, the cross sections for central diffractive Higgs production, in the two cases for pomeron fusion and photon fusion, are competitive.

  6. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    ash in concrete (structural grade concrete, compressive strength up to 4000 psi) and flowable slurry and performance specifications for structural concrete and flowable slurry products for every day construction use developed by UWM- CBU in the past for other by-products and sources of coal ash not meeting

  7. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    clean coal technology, are not extensively utilized in the cast concrete masonry products (bricks both conventional and clean coal technologies. A clean coal ash is defined as the ash derived from SO2Center for By-Products Utilization USE OF CLASS F FLY ASH AND CLEAN-COAL ASH BLENDS FOR CAST

  8. Identifying Product Scaling Principles

    E-Print Network [OSTI]

    Perez, Angel 1986-

    2011-06-02T23:59:59.000Z

    shelling machines A. Manual nut cracker (Faqs, 2010), B. Electric nut cracker (Lemfgco, 2010), C. Production shelling machine (Biodiesel-machine, 2010) ................................................................................ 25 Figure 6: A..., 2010) ............................................................. 29 Figure 8: Examples ?change energy source? A. Mechanical nutcracker powered by the user (Faqs, 2010), B. Conversion to an electric production shelling machine (Biodiesel...

  9. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    ash or CFAs. Based on these properties, a number of constructive use options such as #12;pollution by saw mills, pulp mills, and the wood-products industry, by burning a combination of wood products control [3], land application [9,10,11], construction materials [13,14], have been reported. However, most

  10. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    on "Management & Use of Coal Combustion Products (CCPS)" held in San Antonio, TX, January 2001. Department concrete mixtures were produced for and at the production plant of an architectural precast concrete. Majority of the foundry sand generated in Wisconsin and elsewhere are landfilled at high disposal costs

  11. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Fellow at the UWM-CBU. His research interests include the use of coal fly ash, coal bottom ash, and used in management, disposal, and sale of coal-combustion by-Center for By-Products Utilization USE OF UNDER-UTILIZED COAL- COMBUSTION PRODUCTS IN PERMEABLE

  12. & CONSUMPTION US HYDROPOWER PRODUCTION

    E-Print Network [OSTI]

    ENERGY PRODUCTION & CONSUMPTION US HYDROPOWER PRODUCTION In the United States hydropower supplies 12% of the nation's electricity. Hydropower produces more than 90,000 megawatts of electricity, which is enough to meet the needs of 28.3 million consumers. Hydropower accounts for over 90% of all electricity

  13. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization APPLICATION OF SCRAP TIRE RUBBER IN ASPHALTIC MATERIALS: STATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. PRODUCING CRUMB RUBBER MODIFIER (CRM) FROM USED TIRES . . . . . 3 2.1 PRODUCTION OF CRM THE UNIVERSITY OF WISCONSIN - MILWAUKEE #12;APPLICATION OF SCRAP TIRE RUBBER IN ASPHALTIC MATERIALS: STATE

  14. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -first Century, Hyderabad, India, February 1999. Department of Civil EngineeringandMechanics College) of foundry by-products, including foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option

  15. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    combustion by-products are generated due to the combustion of coal in coal-fired electric power plants as carbon from unburnt coal, fire polished sand, thin-walled hollow spheres and their fragments, magnetic of HVFA concrete to establish mixture proportions for commercial production. #12;INTRODUCTION Coal

  16. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R #12;1 HIGH-STRENGTH HVFA CONCRETE CONTAINING CLEAN COAL ASH By Tarun R. Naik, Shiw S. Singh, and Bruce for manufacture of cement-based products using ashes generated from combustion of high-sulfur coals. A clean coal

  17. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -Milwaukee, P.O. Box 784, Milwaukee, WI 53201 d Project Manager, Illinois Clean Coal Institute * Director UWM products containing clean coal ash compared to conventional coal ash. Utilization of clean coal ash is much products that utilize clean coal ash. With increasing federal regulations on power plant emissions, finding

  18. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization USE OF CLEAN COAL ASH AS SETTING TIME REGULATOR IN PORTLAND OF WISCONSIN ­ MILWAUKEE #12;2 Use of Clean Coal Ash as Setting Time Regulator in Portland Cement by Zichao Wu as setting time regulator for portland cement production. In this paper a source of clean coal ash (CCA

  19. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CLEAN COAL BY-PRODUCTS UTILIZATION IN ROADWAY, EMBANKMENTS-fueled plants, particularly use of eastern coals, has lead to the use of clean coal and using advanced sulfur dioxide control technologies. Figure 1 shows clean coal technology benefits(2) . In 1977, the concept

  20. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    . Naik, Rudolph N. Kraus, Shiw S. Singh, Lori- Lynn C. Pennock, and Bruce Ramme Report No. CBU-2001 with numerous projects on the use of by-product materials including utilization of used foundry sand and fly ash;2 INTRODUCTION Wood FA is generated due to combustion of wood for energy production at pulp and paper mills, saw

  1. Microalgal Production of Jet Fuel: Cooperative Research and Development Final Report, CRADA Number CRD-07-208

    SciTech Connect (OSTI)

    Jarvis, E. E.; Pienkos, P. T.

    2012-06-01T23:59:59.000Z

    Microalgae are photosynthetic microorganisms that can use CO2 and sunlight to generate the complex biomolecules necessary for their survival. These biomolecules include energy-rich lipid compounds that can be converted using existing refinery equipment into valuable bio-derived fuels, including jet fuel for military and commercial use. Through a dedicated and thorough collaborative research, development and deployment program, the team of the National Renewable Energy Laboratory (NREL) and Chevron will identify a suitable algae strain that will surpass the per-acre biomass productivity of terrestrial plant crops.

  2. Gas treatment and by-products recovery of Thailand`s first coke plant

    SciTech Connect (OSTI)

    Diemer, P.E.; Seyfferth, W. [Krupp Uhde GmbH, Dortmund (Germany)

    1997-12-31T23:59:59.000Z

    Coke is needed in the blast furnace as the main fuel and chemical reactant and the main product of a coke plant. The second main product of the coke plant is coke oven gas. During treatment of the coke oven gas some coal chemicals like tar, ammonia, sulphur and benzole can be recovered as by-products. Since the market prices for these by-products are rather low and often erratic it does not in most cases justify the investment to recover these products. This is the reason why modern gas treatment plants only remove those impurities from the crude gas which must be removed for technical and environmental reasons. The cleaned gas, however, is a very valuable product as it replaces natural gas in steel work furnaces and can be used by other consumers. The surplus can be combusted in the boiler of a power plant. A good example for an optimal plant layout is the new coke oven facility of Thai Special Steel Industry (TSSI) in Rayong. The paper describes the TSSI`s coke oven gas treatment plant.

  3. Computational evaluation of Synechococcus sp. PCC 7002 metabolism for chemical production

    SciTech Connect (OSTI)

    Vu, Trang; Hill, Eric A.; Kucek, Leo A.; Konopka, Allan; Beliaev, Alex S.; Reed, Jennifer L.

    2013-05-24T23:59:59.000Z

    Cyanobacteria are ideal metabolic engineering platforms for carbon-neutral biotechnology because they directly convert CO2 to a range of valuable products. In this study, we present a computational assessment of biochemical production in Synechococcus sp. PCC 7002 (Synechococcus 7002), a fast growing cyanobacterium whose genome has been sequenced, and for which genetic modification methods have been developed. We evaluated the maximum theoretical yields (mol product per mol CO2 or mol photon) of producing various chemicals under photoautotrophic and dark conditions using a genome-scale metabolic model of Synechococcus 7002. We found that the yields were lower under dark conditions, compared to photoautotrophic conditions, due to the limited amount of energy and reductant generated from glycogen. We also examined the effects of photon and CO2 limitations on chemical production under photoautotrophic conditions. In addition, using various computational methods such as MOMA, RELATCH, and OptORF, we identified gene-knockout mutants that are predicted to improve chemical production under photoautotrophic and/or dark anoxic conditions. These computational results are useful for metabolic engineering of cyanobacteria to synthesize valueadded products.

  4. Targeted Enhancement of H2 and CO2 Uptake for Autotrophic Production of Biodiesel in the Lithoautotrophic Bacterium Ralsonia Eutropha

    SciTech Connect (OSTI)

    Eckert, C. A.; Sullivan, R.; Johnson, C.; Yu, J.; Maness, P. C.

    2013-01-01T23:59:59.000Z

    CO2 and H2 are promising feedstocks for production of valuable biocompounds. Ralstonia eutropha utilizes these feedstocks to generate energy (ATP) and reductant (NAD(P)H) via oxidation of H2 by a membrane-bound (MBH) and a soluble hydrogenase (SH) for CO2 fixation by the Calvin-Benson-Bassham (CBB) cycle. Increased expression of the enzyme that fixes CO2 (RubisCO) resulted in 6-fold activity improvement in vitro, while increased expression of the MBH operon or the SH operon plus MBH operon maturation factors necessary for activity resulted in a 10-fold enhancement. Current research involves genetic manipulation of two endogenous cbb operons for increased expression, analysis of expression and activity of CBB/MBH/SH, cofactor ratios, and downstream products during autotrophic growth in control versus enhanced strains, and development of strategies for long-term, optimal overexpression. These studies will improve our understanding of autotrophic metabolism and provide a chassis strain for autotrophic production of biodiesel and other valuable carbon biocompounds.

  5. Indecomposable Fusion Products

    E-Print Network [OSTI]

    Matthias R. Gaberdiel; Horst G. Kausch

    1996-04-04T23:59:59.000Z

    We analyse the fusion products of certain representations of the Virasoro algebra for c=-2 and c=-7 which are not completely reducible. We introduce a new algorithm which allows us to study the fusion product level by level, and we use this algorithm to analyse the indecomposable components of these fusion products. They form novel representations of the Virasoro algebra which we describe in detail. We also show that a suitably extended set of representations closes under fusion, and indicate how our results generalise to all (1,q) models.

  6. Composite production riser assessment 

    E-Print Network [OSTI]

    Kim, Won Ki

    2007-09-17T23:59:59.000Z

    The performance of a deep water composite production riser from a system perspective is presented, and its advantages are articulated through comparisons with a typical steel riser under identical service conditions. The ...

  7. Power production and ADS

    SciTech Connect (OSTI)

    Raja, Rajendran; /Fermilab

    2010-03-01T23:59:59.000Z

    We describe the power production process in Accelerator Driven Sub-critical systems employing Thorium-232 and Uranium-238 as fuel and examine the demands on the power of the accelerator required.

  8. Quarkonium production at ATLAS

    E-Print Network [OSTI]

    Darren D Price

    2012-01-24T23:59:59.000Z

    The production of quarkonium is an important testing ground for QCD calculations. The J/\\psi\\ and \\Upsilon\\ production cross-sections are measured in proton-proton collisions at a centre-of-mass energy of 7~TeV with the ATLAS detector at the LHC. Differential cross-sections are presented as a function of transverse momentum and rapidity. The fraction of J/\\psi\\ produced in B-hadron decays is also measured and the differential cross-sections of prompt and non-prompt J/\\psi\\ production determined separately. Measurements of the fiducial production cross-section of the \\Upsilon(1S) and observation of the \\chi_{c,bJ} states are also discussed.

  9. Biomass Energy Production Incentive

    Broader source: Energy.gov [DOE]

    In 2007 South Carolina enacted the ''Energy Freedom and Rural Development Act'', which provides production incentives for certain biomass-energy facilities. Eligible systems earn $0.01 per kilowatt...

  10. Production of Shale Oil 

    E-Print Network [OSTI]

    Loper, R. D.

    1982-01-01T23:59:59.000Z

    Intensive pre-project feasibility and engineering studies begun in 1979 have produced an outline plan for development of a major project for production of shale oil from private lands in the Piceance Basin in western Colorado. This outline plan...

  11. Texas Alfalfa Production

    E-Print Network [OSTI]

    Stichler, Charles

    1997-05-05T23:59:59.000Z

    With proper management, alfalfa will produce forage with the highest protein and total digestible nutrient of any hay crop. To aid in alfalfa production, this publication provides information on pre-plant factors, planting and stand establishment...

  12. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -Products Utilization E-mail: ymchun@uwm.edu and F. D. Botha Project Manager, Illinois Clean Coal Institute 5776 Coal, University of Wisconsin-Milwaukee, Milwaukee, WI, USA. 4 Project Manager, Illinois Clean Coal Institute

  13. Ethanol production from lignocellulose

    DOE Patents [OSTI]

    Ingram, Lonnie O. (Gainesville, FL); Wood, Brent E. (Gainesville, FL)

    2001-01-01T23:59:59.000Z

    This invention presents a method of improving enzymatic degradation of lignocellulose, as in the production of ethanol from lignocellulosic material, through the use of ultrasonic treatment. The invention shows that ultrasonic treatment reduces cellulase requirements by 1/3 to 1/2. With the cost of enzymes being a major problem in the cost-effective production of ethanol from lignocellulosic material, this invention presents a significant improvement over presently available methods.

  14. Particle production at HERA

    E-Print Network [OSTI]

    Changyi Zhou

    2009-06-19T23:59:59.000Z

    H1 has measured a number of different known particles and compared their production to QCD models and to other reactions such as N-N collisions. ZEUS has also measured the production of K0SK0S pairs with a view to searching for glueballs. Several resonances are seen which are glueball candidates. The results on the masses and widths are compared to other experiments.

  15. Ethyl Alcohol Production.

    E-Print Network [OSTI]

    O'Neal, Henry

    1981-01-01T23:59:59.000Z

    +------.-----.------.------.-----.------.-- o 2 3 4 5 6 Time (hrs.) Batch 29 Cooking and Fermenting Log Corn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 682 pounds (12.2 bushels) Natural gas used Meter measures in increments of 100 cubic feet. Cooking.... The following general production steps are the ones presently used and may change with future production experience. 1. The grain is ground in a hammermill with a 1/8- inch screen. Each of the 350 gallon cooker fermenter tanks normally handles a 12...

  16. Pretreated densified biomass products

    DOE Patents [OSTI]

    Dale, Bruce E; Ritchie, Bryan; Marshall, Derek

    2014-03-18T23:59:59.000Z

    A product comprising at least one densified biomass particulate of a given mass having no added binder and comprised of a plurality of lignin-coated plant biomass fibers is provided, wherein the at least one densified biomass particulate has an intrinsic density substantially equivalent to a binder-containing densified biomass particulate of the same given mass and h a substantially smooth, non-flakey outer surface. Methods for using and making the product are also described.

  17. Individuals in product development : interactions with teams and products

    E-Print Network [OSTI]

    Castro, João Nuno Lopes

    2010-01-01T23:59:59.000Z

    This dissertation focuses on how individuals involved in complex product development operate and interact with other people in the project and how they perceive and modify the product. Complex product development requires ...

  18. Productivity prediction model based on Bayesian analysis and productivity console

    E-Print Network [OSTI]

    Yun, Seok Jun

    2005-08-29T23:59:59.000Z

    in poor planning and defies effective control of time and budgets in project management. In this research, we have built a productivity prediction model which uses productivity data from an ongoing project to reevaluate the initial productivity estimate...

  19. BPA Power Products Catalog (pbl/products)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugustDecade Later: AreAugust 19, 2009

  20. Theoretical overview on top pair production and single top production

    E-Print Network [OSTI]

    Stefan Weinzierl

    2012-01-19T23:59:59.000Z

    In this talk I will give an overview on theoretical aspects of top quark physics. The focus lies on top pair production and single top production.

  1. Production design for plate products in the steel industry

    E-Print Network [OSTI]

    We describe an optimization tool for a multistage production process for ... plates. The problem we solve yields a production design (or plan) for rectangular plate.

  2. Design of product development systems

    E-Print Network [OSTI]

    Aguirre Granados, Adrian

    2008-01-01T23:59:59.000Z

    The development of successful new products in less time and using fewer resources is key to the financial success of most consumer product companies. In this thesis we have studied the development of new products and how ...

  3. JGI Lab Ergo Products Catalog

    E-Print Network [OSTI]

    Alexandre, Melanie

    2010-01-01T23:59:59.000Z

    35 Page 1 of 35 Laboratory Ergonomics Product Arm Supports/Page 2 of 35 Laboratory Ergonomics Product Features/OptionsPage 3 of 35 Laboratory Ergonomics Product SoftEdge Corners

  4. Sandia National Laboratories: hydrogen production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    production High-Efficiency Solar Thermochemical Reactor for Hydrogen Production On July 9, 2014, in Center for Infrastructure Research and Innovation (CIRI), Concentrating Solar...

  5. GMP- Biomass Electricity Production Incentive

    Broader source: Energy.gov [DOE]

    Green Mountain Power Corporation (GMP), Vermont's largest electric utility, offers a production incentive to farmers who own systems utilizing anaerobic digestion of agricultural products,...

  6. Covered Product Categories (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-08-01T23:59:59.000Z

    Overview of the U.S. Department of Energy Federal Energy Management Program Energy-Efficient Product Procurement Program and its designated product category list.

  7. Technology's Impact on Production

    SciTech Connect (OSTI)

    Rachel Amann; Ellis Deweese; Deborah Shipman

    2009-06-30T23:59:59.000Z

    As part of a cooperative agreement with the United States Department of Energy (DOE) - entitled Technology's Impact on Production: Developing Environmental Solutions at the State and National Level - the Interstate Oil and Gas Compact Commission (IOGCC) has been tasked with assisting state governments in the effective, efficient, and environmentally sound regulation of the exploration and production of natural gas and crude oil, specifically in relation to orphaned and abandoned wells and wells nearing the end of productive life. Project goals include: (1) Developing (a) a model framework for prioritization and ranking of orphaned or abandoned well sites; (b) a model framework for disbursement of Energy Policy Act of 2005 funding; and (c) a research study regarding the current status of orphaned wells in the nation. (2) Researching the impact of new technologies on environmental protection from a regulatory perspective. Research will identify and document (a) state reactions to changing technology and knowledge; (b) how those reactions support state environmental conservation and public health; and (c) the impact of those reactions on oil and natural gas production. (3) Assessing emergent technology issues associated with wells nearing the end of productive life. Including: (a) location of orphaned and abandoned well sites; (b) well site remediation; (c) plugging materials; (d) plug placement; (e) the current regulatory environment; and (f) the identification of emergent technologies affecting end of life wells. New Energy Technologies - Regulating Change, is the result of research performed for Tasks 2 and 3.

  8. A Quantum Production Model

    E-Print Network [OSTI]

    Luís Tarrataca; Andreas Wichert

    2015-02-06T23:59:59.000Z

    The production system is a theoretical model of computation relevant to the artificial intelligence field allowing for problem solving procedures such as hierarchical tree search. In this work we explore some of the connections between artificial intelligence and quantum computation by presenting a model for a quantum production system. Our approach focuses on initially developing a model for a reversible production system which is a simple mapping of Bennett's reversible Turing machine. We then expand on this result in order to accommodate for the requirements of quantum computation. We present the details of how our proposition can be used alongside Grover's algorithm in order to yield a speedup comparatively to its classical counterpart. We discuss the requirements associated with such a speedup and how it compares against a similar quantum hierarchical search approach.

  9. Converting Biomass to Products

    SciTech Connect (OSTI)

    Graybeal, Judith W.

    2006-06-01T23:59:59.000Z

    For nearly 30 years, PNNL has been developing and applying novel thermal, chemical and biological processes to convert biomass to industrial and consumer products, fuels and energy. Honors for technologies resulting from this research include the Presidential Green Chemistry Award and several Federal Laboratory Consortium and R&D 100 Awards. PNNL’s research and development activities address the complete processing scheme, from feedstock pretreatment to purified product recovery. The laboratory applies fundamental science and advanced engineering capabilities to biomass conversion and processing to ensure effective recovery of optimal value from biomass; carbohydrate polymer systems to maximize energy efficiencies; and micro-technology systems for separation and conversion processes. For example, bioproducts researchers in the laboratory’s Institute for Interfacial Catalysis develop and demonstrate the utility of new catalyst formulations for production of bio-based chemicals. This article describes a sampling of current and recent catalysis projects for biomass conversion.

  10. On entropy production

    SciTech Connect (OSTI)

    Stenholm, Stig [Physics Department, Royal Institute of Technology, KTH, ALBANOVA, Roslagstullsbacken 21, SE-10691 Stockholm (Sweden); Laboratory of Computational Engineering, HUT, Espoo (Finland)], E-mail: stenholm@atom.kth.se

    2008-11-15T23:59:59.000Z

    We investigate the case of a dynamical system when irreversible time evolution is generated by a nonHermitian superoperator on the states of the system. We introduce a generalized scalar product which can be used to construct a monotonically changing functional of the state, a generalized entropy. This will depend on the level of system dynamics described by the evolution equation. In this paper we consider the special case when the irreversibility derives from imbedding the system of interest into a thermal reservoir. The ensuing time evolution is shown to be compatible both with equilibrium thermodynamics and the entropy production near the final steady state. In particular, Prigogine's principle of minimum entropy production is discussed. Also the limit of zero temperature is considered. We present comments on earlier treatments.

  11. A multi-level approach to assessing alpine productivity responses to climate change

    E-Print Network [OSTI]

    Winkler, Daniel E.

    2013-01-01T23:59:59.000Z

    Team RC (2013) R: A Language and Environment for Statisticallanguage (R code) in addition to providing valuable statistical

  12. Chicago's Artisan Baker TM Job Title: Production Supervisor Department: Production

    E-Print Network [OSTI]

    Heller, Barbara

    Chicago's Artisan Baker TM Job Title: Production Supervisor Department: Production Revision Date: 07/15/2012 Reports To: Sr. Production Mgr. Position Overview: The Supervisor's major responsibility is to oversee the daily production operations. This position has the responsibility of coordinating all

  13. 15 Software Product Line Engineering with the UML: Deriving Products

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    15 Software Product Line Engineering with the UML: Deriving Products T. Ziadi and J.-M. Jézéquel Abstract Software product line engineering introduces two new dimensions into the traditional engineering of software-based systems: the variability modeling and the product derivation. The variability gathers

  14. Barley Production in Texas.

    E-Print Network [OSTI]

    Atkins, I. M.; Gardenshire, J. H.; McDaniel, M. E.; Porter, K. B.

    1969-01-01T23:59:59.000Z

    nutrients. It is lower in nitrogenh extract and productive energy per I00 pounds lr feed, Table 4. Research Extension I] area sts 1-1 I" I uv I I - Y Barley is an excellent winter pasture, Figure ; While the total seasonal production for barley... from C.I. 7404, a Korean barley Wintex x Texan Sunrise x Bolivia Comfort, Purdue 1101, Wisconsin barbless, Chevron, Bolivia, Kentucky 1, Purdue 400-17 Texas x Ludwig [(Hooded 16 x Sunrise) x Tenwase] x Wong-Jet Juliaca x Peatland Selection from...

  15. LIPID PRODUCTION BY DUNALIELLA SALINA IN BATCH CULTURE: EFFECTS OF NITROGEN LIMITATION AND LIGHT INTENSITY

    SciTech Connect (OSTI)

    Weldy, C.S.; Huesemann, M.

    2007-01-01T23:59:59.000Z

    Atmospheric carbon dioxide (CO2) concentrations are increasing and may cause unknown deleterious environmental effects if left unchecked. The Intergovernmental Panel on Climate Change (IPCC) has predicted in its latest report a 2°C to 4°C increase in global temperatures even with the strictest CO2 mitigation practices. Global warming can be attributed in large part to the burning of carbon-based fossil fuels, as the concentration of atmospheric CO2 is directly related to the burning of fossil fuels. Biofuels which do not add CO2 to the atmosphere are presently generated primarily from terrestrial plants, i.e., ethanol from corn grain and biodiesel from soybean oil. The production of biofuels from terrestrial plants is severely limited by the availability of fertile land. Lipid production from microalgae and its corresponding biodiesel production have been studied since the late 1970s but large scale production has remained economically infeasible due to the large costs of sterile growing conditions required for many algal species. This study focuses on the potential of the halophilic microalgae species Dunaliella salina as a source of lipids and subsequent biodiesel production. The lipid production rates under high light and low light as well as nitrogen suffi cient and nitrogen defi cient culture conditions were compared for D. salina cultured in replicate photobioreactors. The results show (a) cellular lipid content ranging from 16 to 44% (wt), (b) a maximum culture lipid concentration of 450mg lipid/L, and (c) a maximum integrated lipid production rate of 46mg lipid/L culture*day. The high amount of lipids produced suggests that D. salina, which can be mass-cultured in non-sterile outdoor ponds, has strong potential to be an economically valuable source for renewable oil and biodiesel production.

  16. Lipid Production by Dunaliella salina in Batch Culture: Effects of Nitrogen Limitation and Light Intensity

    SciTech Connect (OSTI)

    Weldy, Chad S.; Huesemann, Michael H.

    2007-01-01T23:59:59.000Z

    Atmospheric carbon dioxide (CO2) concentrations are increasing and will cause unknown deleterious environmental effects if left unchecked. The Intergovernmental Panel on Climate Change (IPCC) has predicted in its latest report a 2ºC to 4ºC increase in global temperatures even with the strictest CO2 mitigation practices. Global warming can be attributed to in large part to the burning of carbon-based fossil fuels, as the concentration of atmospheric CO2 is directly related to the burning of fossil fuels. Biofuels which do not add CO2 to the atmosphere are presently generated primarily from terrestrial plants, i.e., ethanol from corn grain and biodiesel from soybean oil. The production of biofuels from terrestrial plants is severely limited by the availability of fertile land. Lipid production from microalgae and its corresponding biodiesel production have been studied since the late 1970’s but large scale production was determined to be economically unfeasible due to the large costs of sterile growing conditions required for many algal species. This study focuses on the potential to use the halophilic microalgae species Dunaliella salina as a source of lipids and subsequently for biodiesel production. The lipid production rates were compared for D. salina cultured in replicate photobioreactors under high light and low light as well as nitrogen sufficient and nitrogen deficient culture conditions. The results show (a) cellular lipid content ranging from 16 to 44% (wt), (b) a maximum culture lipid concentration of 450 mg lipid/L, and (c) a maximum integrated lipid production rate of 46 mg lipid/L culture*day. The high amount of lipids produced suggests that D. salina, which can be mass-cultured in non-sterile outdoor ponds, has a strong potential to be an economically valuable source for renewable oil and biodiesel production.

  17. FEMP Designated Product: Lavatory Faucets

    Broader source: Energy.gov [DOE]

    FEMP suspended its product designation and purchasing specification for commercial faucets until further notice.

  18. MSENGR Product Design Program Proposal

    E-Print Network [OSTI]

    Prinz, Friedrich B.

    MSENGR Product Design Program Proposal Rev 6/2007 p. 1 New Proposal Revision First graduate Language 3 ME216A Advanced Product Design: Need Finding 4 ME312 Advanced Product Design: Form Giving 4 ARTSTUDI160 Design II: The Bridge 3 ME216B Advanced Product Design: Implementation 4 ME316

  19. Hydrogen Production & Delivery Sara Dillich

    E-Print Network [OSTI]

    ). 15% solar-to-chemical energy efficiency by microalgae Biomass Gasification Hydrogen Production Cost

  20. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    , ready- mixed concrete, and low-strength flowable concrete and slurry. The major topics included are; freezing and thawing durability; strength; sulfate resistance. #12;2 INTRODUCTION Coal is the most widely amounts of coal combustion products (CCPs), which include fly ash, bottom ash, boiler slag, and flue gas

  1. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    limestone quarry in Wisconsin generates over 125,000 tons of quarry fines and quarry bag-house dust each limestone quarry fines and quarry bag-house dust, to reduce costs, as well as to reduce the use of expensive be used in SCC. Use of quarry by-products in SCC will lead to economical and ecological benefits

  2. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Issued to the Illinois Clean Coal Institute For Project 02-1/3.1D-2 Department of Civil Engineering of technology and market development for controlled low-strength material (CLSM) slurry using Illinois coal ashCenter for By-Products Utilization IMPLEMENTATION OF FLOWABLE SLURRY TECHNOLOGY IN ILLINOIS

  3. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    technologies. A clean-coal ash is defined as the ash derived from SOxand NOxcontrol technologies, and FBC that obtained from clean-coal technology, are not utilized in cast-concrete masonry products (bricks, blocks conventional and clean-coal technologies. Fifteen high-sulfur coal ash samples were obtained from eight

  4. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE By Tarun R;CARBON DIOXIDE SEQUESTRATION IN NO-FINES CONCRETE ABSTRACT By Tarun, R. Naik, Yoon-moon Chun, Rudolph N. Kraus, and Fethullah Canpolat This paper presents a detailed experimental study on the sequestration

  5. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    , compressive strength, concrete testing, fly ash, high-performance concrete, hot weather, permeability, silica Testing of Concrete", Committee 214, "Evaluation of Results of Strength Tests of Concrete", and CommitteeCenter for By-Products Utilization STRENGTH AND DURABILITY OF HIGH- PERFORMANCE CONCRETE SUBJECTED

  6. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    ash to solve the concerns associated with its disposal. Wood ash consists of two different types ash and coal fly ash for use in concrete, was used to determine general suitability of wood ashCenter for By-Products Utilization WOOD ASH: A NEW SOURCE OF POZZOLANIC MATERIAL By Tarun R. Naik

  7. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    the concerns associated with its disposal. Wood ash consists of two different types of materials: fly ash for use as construction materials. Therefore, ASTM C 618, developed for volcanic ash and coal fly ashCenter for By-Products Utilization WOOD ASH: A NEW SOURCE OF POZZOLANIC MATERIAL By Tarun R. Naik

  8. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    ;2 INTRODUCTION Fly ash and bottom ash are generated due to combustion of coal in electric power plants. The annual production of fly ash and bottom ash by coal-burning power plants in the United States/bronze foundries, etc. Currently, large volumes of fly ash, bottom ash, and used foundry sand are disposed

  9. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    beneficial uses of wood ash to meet the challenges associated with its disposal. Wood ash consists of two C 618 [13] developed for volcanic ash and coal fly ash for use in concrete, was used to determineCenter for By-Products Utilization RECYCLING OF WOOD ASH IN CEMENT-BASED CONSTRUCTION MATERIALS

  10. Covered Product Category: Displays

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including displays, which are covered by the ENERGY STAR program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  11. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -air entrained concrete without fly ash. Detailed results are presented. Keywords: carbon dioxide sequestrationCenter for By-Products Utilization CO2 SEQUESTRATION IN NON-AIR ENTRAINED CONCRETE By Tarun R. Naik SEQUESTRATION IN NON-AIR ENTRAINED CONCRETE ABSTRACT by Tarun, R. Naik, Yoon-moon Chun, Rudolph N. Kraus

  12. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CO2 SEQUESTRATION IN NON-AIR ENTRAINED CONCRETE By Tarun R. Naik and Applied Science THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;1 CO2 SEQUESTRATION IN NON-AIR ENTRAINED-moon Chun The objectives of this project were to sequester carbon dioxide (CO2) in concrete and study

  13. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CO2 SEQUESTRATION IN NO-FINES CONCRETE By Tarun R. Naik, Timir C Science THE UNIVERSITY OF WISCONSIN­MILWAUKEE #12;1 CO2 SEQUESTRATION IN NO-FINES CONCRETE ABSTRACT of this project were to sequester carbon dioxide (CO2) in concrete and study the effects of carbonation

  14. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    wood with supplementary fuels such as coal, oil, natural gas, and coke by pulp and paper mills and wood, knots, chips, etc. with other supplementary fuels such as coal, oil, natural gas, and coke to generateCenter for By-Products Utilization DEVELOPMENT OF CLSM USING COAL ASH AND WOOD ASH, A SOURCE OF NEW

  15. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    in a combination with a number of fuels including coal, petroleum coke, natural gas, etc. In the mid 1990s, the unit was firing a combination of coal and petroleum coke to generate energy. It has been established;1 PROJECT 1 - COAL COMBUSTION BY-PRODUCTS: CHARACTERIZATION AND USE OPTIONS Introduction An AFBC system

  16. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Presentationand Publicationat the CBIP International Conference onFly Ash Disposal & Utilization,New Delhi, India, January 1998 foundry sand and slag. Most of these by-products are landfilled, primarily due to non-availability of economically attractive use options. Landfilling is not a desirable option because it not only causes huge

  17. Productivity increases in science

    SciTech Connect (OSTI)

    Danko, J.E. [ed.; Young, J.K.; Molton, P.M.; Dirks, J.A.

    1993-02-01T23:59:59.000Z

    The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today`s scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

  18. Productivity increases in science

    SciTech Connect (OSTI)

    Danko, J.E. (ed.); Young, J.K.; Molton, P.M.; Dirks, J.A.

    1993-02-01T23:59:59.000Z

    The study quantifies the impact on the cost of experimentation of synergistic advancements in instrumentation, theory, and computation over the last two decades. The study finds that the productivity of experimental investigation (experimental results/$) is increasing as science is transformed from a linear, isolated approach to a hierarchical, multidisciplinary approach. Developments such as massively parallel processors coupled with instrumental systems with multiple probes and diverse data analysis capabilities will further this transformation and increase the productivity of scientific studies. The complexities and scale of today's scientific challenges are much greater than in the past, however, so that the costs of research are increasing. Even though science is much more productive in terms of the experimental results, the challenges facing scientific investigators are increasing at an even faster pace. New approaches to infrastructure investments must capitalize on the changing dynamics of research and allow the scientific community to maximize gains in productivity so that complex problems can be attacked cost-effectively. Research strategies that include user facilities and coordinated experimental, computational, and theoretical research are needed.

  19. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    tires generated during the year 1990 - 1991 were reused, recycled, or recovered [4]. A number of usesCenter for By-Products Utilization CONSTRUCTION MATERIALS INCORPORATING DISCARDED TIRES By Tarun R - MILWAUKEE #12;CONSTRUCTION MATERIALS INCORPORATING DISCARDED TIRES* By Tarun R. Naik Director, Center for By

  20. Lithium Ion Production NDE

    E-Print Network [OSTI]

    Lithium Ion Electrode Production NDE and QC Considerations David Wood, Debasish Mohanty, Jianlin Li, and Claus Daniel 12/9/13 EERE Quality Control Workshop #12;2 Presentation name Lithium Ion Electrode to be meaningful and provide electrode and cell QC. #12;3 Presentation name New Directions in Lithium Ion Electrode

  1. Savings Products Summer Saver

    E-Print Network [OSTI]

    Burke, Peter

    earning higher dividends. Direct Deposit Receive your paycheck one day early1 when you direct deposit Loan Pursue an advanced degree. Variable rate; loan amounts up to $50,000. Retirement Products2 403(b) and 457(b) Pre-tax retirement savings to supplement CalSTRS or CalPERS. Roth 403(b) After-tax retirement

  2. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By-Products Utilization CHARACTERIZATION AND APPLICATION OF CLASSF FLY ASHCOAL AND CLEAN-COAL #12;-1- CHARACTERIZATION AND APPLICATION OF CLASSF FLYASHCOAL AND CLEAN-COAL ASHFOR CEMENT -Milwaukee (UWM) Daniel D.Banerjee, Project Manager,Illinois Clean Coal Institute RudolphN.Kraus, Research

  3. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    CONTAINING CLEAN-COAL ASH AND CLASS F FLY ASH By Tarun R. Naik, Rudolph N. Kraus, Rafat Siddique of HVFA Concrete Containing Clean-Coal Ash and Class F Fly Ash By Tarun R. Naik Director, UWM Center for By-Products Utilization and Francois Botha Project Manager, Illinois Clean Coal Institute Synopsis

  4. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    flue gas. Detailed results are presented. Keywords: carbon dioxide sequestration, carbonation, carbonCenter for By-Products Utilization CO2 SEQUESTRATION IN FOAMED CONTROLLED LOW STRENGTH MATERIALS #12;1 CO2 SEQUESTRATION IN FOAMED CONTROLLED LOW STRENGTH MATERIALS by Tarun R. Naik, Rudolph N. Kraus

  5. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    was produced by Wisconsin Electric's coal-fired power plants. The criteria for selecting these mixtures was to utilize minimal cost materials, such as coal combustion by-products (fly ash, bottom ash, etc coal combustion waste material (fly ash) to the maximum extent possible while minimizing costs (e

  6. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    -product of combustion from wood-fired boilers, at a typical paper mills and other wood burning facilities. Approximately %) of wood ash and coal fly ash; (3) non-air- entrained structural-grade concrete (up to 60 MPa 28-day compressive strength) with wood ash or its blends with coal fly ash (up to 40 %) as partial replacement

  7. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    plants are the major source of generation of electricity. Coal-fired power plants derive energy by burning coal in their furnaces. These power plants generally use either pulverized coal-fired furnaces. 2.0 MATERIALS 2.1 COAL-COMBUSTION BY-PRODUCTS In most of the countries coal- fired thermal power

  8. Production of Shale Oil

    E-Print Network [OSTI]

    Loper, R. D.

    1982-01-01T23:59:59.000Z

    and the principal features of a proposed $5 billion project to develop facilities for production of 100,000 barrels per day of synthetic crude from oil shale. Subjects included are resource evaluation, environmental baseline studies, plans for acquisition of permits...

  9. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    ­ Milwaukee, Milwaukee, WI and Ronald H. Carty Director Illinois Clean Coal Institute Carterville, IL ABSTRACT, Naik and Singh [16] summarized various applications of fly ash generated from conventional and clean coal technologies. Uses of coal combustion by- products can be categorized into three classes: high-volum

  10. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    of coal in conventional and/ or advanced clean coal technology combustors. These include fly ash, bottom ash, boiler slag, and flue gas desulfurization (FGD) by-products from advanced clean coal technology clean coal technology combustors. Over 60% of the CCBs are generated as fly ash. An estimate

  11. By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    and paper mills in concrete. INTRODUCTION Concrete is a porous solid that is created by combining four basicCenter for By-Products Utilization CURING TEMPERATURE EFFECTS ON HIGH-PERFORMANCE CONCRETE By Tarun For presentation and publication at the symposium entitled "High-Performance Concrete and Concrete for Marine

  12. Product Information Transparent

    E-Print Network [OSTI]

    Yoo, S. J. Ben

    , transformers, amplifiers, high voltage resistor packs, and relays; adhesive/encapsulant for solar cellsProduct Information Solar FEATURES · Transparent · Cures to flexible elastomer · Constant cure rate elastomer, which is suited for the protection of electrical/electronic devices in solar applications. HOW

  13. Simulation of Sextet Diquark Production

    E-Print Network [OSTI]

    Peter Richardson; David Winn

    2011-11-22T23:59:59.000Z

    We present a method for simulating the production and decay of particles in the sextet representation of $SU(3)_C$ including the simulation of QCD radiation. First results from the Monte Carlo simulation of sextet diquark production at the LHC including both resonant and pair production are presented. We include limits on resonant diquark production from recent ATLAS results and perform the first simulation studies of the less model dependent pair production mechanism.

  14. Corn Production in Texas.

    E-Print Network [OSTI]

    Collier, Jesse W. (Jesse Wilton); Rogers, John S. (John Sinclair)

    1952-01-01T23:59:59.000Z

    during wet seasons, and they may cause appreciable damage each year in the more humid sections. Hybrids such as Texas 24 and 30, which possess some resistance, shorrld be used where diseases and i~sects are a serious problem. The Texas hybrid corn... in this bulletin and recommendations are given for corn production in the different areas of the ' State. Numerous diseases and insects attack corn in Texas and are responsible for considerable damage to the crop. These organisms are especiallv prevalent...

  15. Measurement of gamma + c + X and gamma + b + X production cross sections at s**(1/2) = 1.96-TeV

    SciTech Connect (OSTI)

    Duggan, Daniel; /Florida State U.

    2009-06-01T23:59:59.000Z

    The photon plus heavy-flavour quark (b, c) final state provides a unique and valuable window into both the sea quark content of the proton and the splitting of gluons into heavy-flavour quark pairs. A new combination of experimental techniques has provided the basis for the first measurements of the differential {gamma} + c + X and {gamma} + b + X production cross sections at {radical}s = 1.96 TeV. The measurements use {approx} 1 fb{sup -1} of data from p{bar p} collisions collected with the D0 detector.

  16. Mineralogical and physical considerations related to the separation and recovery of constituents from aluminum smelter by-products and wastes

    SciTech Connect (OSTI)

    Plumpton, A.J.; Wilhelmy, J.F.; Blackburn, D.; Caouette, J.L. [Centre de Recherches Minerales, Sainte-Foy, Quebec (Canada)

    1996-10-01T23:59:59.000Z

    Several by-products and waste products of aluminum smelting were characterized mineralogically and physically, in order to evaluate the potential for their decontamination or separation and recovery into valuable products using mineral processing techniques. The test samples were selected from among Bayer process red mud, bath-alumina mixture, cleaned anode butts, anode recycle residues, spent potlining, saltcake and fluorogypsum. Several of these materials were shown to be composed either of highly liberated, potentially separable mineral phases, or of locked minerals which could be partially liberated by grinding to smaller but practical particle sizes. An analysis of specific physical properties of the liberated constituent mineral phases was accompanied by preliminary experimental evaluation of their separability. An assessment was made of potential mineral processing techniques including size and form differentiation, gravitational and magnetic field separation, flotation, separation based on surface charging phenomena or work function, and pneumatic tabling. The results confirmed the suitability of low-cost physical separation techniques for the treatment of some by-products and wastes. This paper presents results of a preliminary evaluation of two smelter products. The conference paper will analyze and discuss in more detail the potential for the mineral processing of these and other smelter by-products and wastes.

  17. Covered Product Categories (Fact Sheet), Energy-Efficient Product...

    Broader source: Energy.gov (indexed) [DOE]

    Legend of Energy-Efficient Product Programs n ENERGY STAR p FEMP-Designated u FEMP Low Standby Power l Electronic Product Environmental Assessment Tool (EPEAT) WaterSense...

  18. Data mining in design of products and production systems

    E-Print Network [OSTI]

    Kusiak, Andrew

    Data mining in design of products and production systems Andrew Kusiak *, Matthew Smith Intelligent Data mining is acquiring its own identity by refining concepts from other disciplines, developing affected by the data mining pursuit. This paper outlines areas of product and manufacturing system design

  19. Elemental Fluorine-18 Gas: Enhanced Production and Availability

    SciTech Connect (OSTI)

    VanBrocklin, Henry F. [Department of Radiology and Biomedical Imaging

    2011-12-01T23:59:59.000Z

    The overall objective of this project was to develop an efficient, reproducible and reliable process for the preparation of fluorine-18 labeled fluorine gas ([¹?F]F?) from readily available cyclotron-produced [¹?F]fluoride ion. The two step process entailed the production of [¹?F]fluoromethane with subsequent conversion to [¹?F]F? by electric discharge of [¹?F]fluoromethane in the presence of carrier nonradioactive F? gas. The specific goals of this project were i) to optimize the preparation of [¹?F]fluoromethane from [¹?F]fluoride ion; ii) to develop a prototype automated system for the production of [¹?F]F? from [¹?F]fluoride ion and iii) develop a compact user friendly automated system for the preparation of [¹?F]F? with initial synthesis of fluorine-18 labeled radiotracers. Over the last decade there has been an increased interest in the production of "non-standard" positron-emitting isotopes for the preparation of new radiotracers for a variety of applications including medical imaging and therapy. The increased availability of these isotopes from small biomedical cyclotrons has prompted their use in labeling radiotracers. In much the same way the production of [¹?F]F? gas has been known for several decades. However, access to [¹?F]F? gas has been limited to those laboratories with the means (e.g. F? targetry for the cyclotron) and the project-based need to work with [¹?F]F? gas. Relatively few laboratories, compared to those that produce [¹?F]fluoride ion on a daily basis, possess the capability to produce and use [¹?F]F? gas. A simplified, reliable system employing [¹?F]fluoride ion from cyclotron targetry systems that are already in place coupled with on-demand production of the [¹?F]F? gas would greatly enhance its availability. This would improve the availability of [¹?F]F? gas and promote further work with a valuable precursor. The major goals of the project were accomplished over the funding period. The preparation of ¹?F]fluoromethane has been automated with reproducible yields greater than 90% conversion from [¹?F]fluoride ion. A trap and release system was established for the [¹?F]fluoride ion concentration and direct elution of the [¹?F]fluoride ion into the reaction vial with the appropriate base and precursor in DMSO. Other solvents were also investigated. The production time for [¹?F]fluoromethane is less than 10 minutes. An automated system for the [¹?F]F? gas production from the [18F]fluoromethane has been developed. The unit coupled to the [¹?F]fluoromethane system permits the on demand production of [¹?F]F? gas. In less than 30 minutes, mCi quantities of [¹?F]F? gas were produced. Several variables for the [¹?F]F? gas production were investigated and a set of parameters for reproducible operation were determined. These parameters included discharge chamber size, carrier gas (He, Ne, Ar), discharge time, discharge current, mass of F? gas added to the chamber. FDOPA and EF5 were used to test the reactivity of the [¹?F]F? gas. Both products were produced in low to modest yield. The ready availability of [¹?F]F? gas has potential impact to advance both DOE mission-driven initiatives and nuclear medicine initiatives through other federally funded agencies such as NIH and DoD. New reactions involving the use of [¹?F]F? gas will lead to direct labeling of new radiotracers and intermediates as well as new fluorine-18 labeled synthons that may be further reacted with other reagents to provide useful fluorine-18 labeled compounds. New tracers to understand and follow plant and microbial metabolism as well as new tracers for nuclear medicine applications, that have been either difficult to obtain or never produced due to the limited availability of [¹?F]F? gas, may be prepared using the techniques developed .

  20. Enabling effective product launch decisions

    E-Print Network [OSTI]

    Akamphon, Sappinandana

    2008-01-01T23:59:59.000Z

    The present work looks into the question of optimizing the performance of product launch decisions-in particular, the decisions of product development duration and manufacturing ramp-up. It presents an innovative model for ...

  1. Covered Product Categories (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-04-01T23:59:59.000Z

    Federal mandates require that Federal agencies purchase energy-efficient products. To help agency buyers meet these requirements, the Federal Energy Management Program (FEMP) maintains a list of FEMP-designated and ENERGY STAR-qualified product categories.

  2. The Productivity Dilemma in Manufacturing

    E-Print Network [OSTI]

    Byrer, T. G.

    1983-01-01T23:59:59.000Z

    industry's needs, improve productivity, and reduce costs is known, but the technology transfer needed to impact our industrial productivity has not taken place. A key factor in accomplishing technology transfer and implementation is the availability...

  3. Automotive Component Product Development Enhancement

    E-Print Network [OSTI]

    of Science in Engineering and Management February 2005 ABSTRACT Automotive industry is facing a tough periodAutomotive Component Product Development Enhancement Through Multi-Attribute System Design Engineering Systems Division #12;Automotive Component Product Development Enhancement Through Multi

  4. Devonian shale production data analysis

    SciTech Connect (OSTI)

    Koziar, G.

    1984-05-01T23:59:59.000Z

    Analysis of Devonian shale production histories without careful data screening can easily mislead even the most exacting investigator. Trends established from cumulative production data may not accurately represent the true production pattern. The difference between a good well and a poorer producer may be the result of fracture depletion or the length of actual producing time (among other factors) rather than a change in reservoir quality. The use of matrix controlled production information, derived from decline curves, appears to resolve this problem.

  5. Small Power Production Facilities (Montana)

    Broader source: Energy.gov [DOE]

    For the purpose of these regulations, a small power production facility is defined as a facility that:...

  6. Covered Product Categories (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-02-01T23:59:59.000Z

    List of Federal Energy Management Program (FEMP)-designated product categories for energy-efficient procurement requirements.

  7. Home Fruit Production - Pears.

    E-Print Network [OSTI]

    Lipe, John A.; Lyons, Calvin; Stein, Larry

    1988-01-01T23:59:59.000Z

    System ? College Station, Texas (Blank Pa,ge -in Origi.aI BoHetiDl ' : . 1 r . .- HOME FRUIT PRODUCTION - PEARS John A. Upe, Calvin Lyons and Larry Stein* Pears are long-lived attractive trees for Texas land scapes. Selected varieties produce good... to Texas and adaptation is still undetermined. SITE AND SOIL REQUIREMENTS Climatically, pears are adapted to all areas of Texas north of a line from Corpus Christi to Laredo. Pears are not recommended farther south, although a few trees have grown...

  8. Slaughter Calf Production.

    E-Print Network [OSTI]

    Thompson, Uel D.

    1955-01-01T23:59:59.000Z

    ?cing fh.e szcb- ject matte?. in, this pzt blicntiolz. Slaughter Calf Production UEL D. THOMPSON, Extension Animal Hzcsba.ndman Texas A. & M. College System MllLlWJ cuttin home1 about -..- - does r -- ' qua1 mor may iinif - I HE SOUTHERN... of the offspring. illustrated in Figure 1. At the Lufkin Experiment Station the mat- I ing of a good quality Hereford bull to a pood quality half-Rrahman half-Hereford cow con- i sistently produced the heaviest calves at wean- 1 Summary of Lufkin Experiment...

  9. Crude Oil Production

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40 Buildingto17 3400, U.S. DEPARTMENTshort0 U.S.4:4Company LevelCoosProduct:Nov-14

  10. Products, Services: Not Procurable

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeedingTechnical News, informationPriorityPetroleumNot Procurable Products,

  11. NGPL Production, Gaseous Equivalent

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal StocksProvedFeet) Year Jan Feb Mar AprWyomingThousand894NGPL Production,

  12. Creating Value Wood Products Industry

    E-Print Network [OSTI]

    Louisiana Forest Products Development Center #12;2 Louisiana is blessed with quality timberland for the Wood Products Industry The forest industry contributes more than 50 percent of the total value of all for quality information, research and education in forest products in Louisiana, recognized regionally

  13. Consensus Coal Production Forecast for

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Consensus Coal Production Forecast for West Virginia 2009-2030 Prepared for the West Virginia Summary 1 Recent Developments 2 Consensus Coal Production Forecast for West Virginia 10 Risks References 27 #12;W.Va. Consensus Coal Forecast Update 2009 iii List of Tables 1. W.Va. Coal Production

  14. Isotope Research 229 Th production

    E-Print Network [OSTI]

    Isotope Research ­ 229 Th production We recently completed an ARRA-funded project of this type on 229 Th production reactions [Str11]. This long-lived isotope is important as a precursor to 225 Ac of accelerator production of 229 Th via the 230 Th(p,2n)229 Pa reaction. The 229 Pa decays primarily by electron

  15. Onion Seed Production in California

    E-Print Network [OSTI]

    Bradford, Kent

    Onion Seed Production in California RONALD E. VOSS, Cooperative Extension Vegetable Specialist Center, Imperial Valley. P R O D U C T I O N A R E A S A N D S E A S O N S Commercial seed production. The Sacramento Valley (particularly Colusa County) and the San Joaquin Valley are also significant production

  16. Calculator simplifies field production forecasting

    SciTech Connect (OSTI)

    Bixler, B.

    1982-05-01T23:59:59.000Z

    A method of forecasting future field production from an assumed average well production schedule and drilling schedule has been programmed for the HP-41C hand-held programmable computer. No longer must tedious row summations be made by hand for staggered well production schedules. Details of the program are provided.

  17. IN DRIFT CORROSION PRODUCTS

    SciTech Connect (OSTI)

    D.M. Jolley

    1999-12-02T23:59:59.000Z

    As directed by a written development plan (CRWMS M&O 1999a), a conceptual model for steel and corrosion products in the engineered barrier system (EBS) is to be developed. The purpose of this conceptual model is to assist Performance Assessment Operations (PAO) and its Engineered Barrier Performance Department in modeling the geochemical environment within a repository drift, thus allowing PAO to provide a more detailed and complete in-drift geochemical model abstraction and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near-Field Environment (NFE) Revision 2 (NRC 1999). This document provides the conceptual framework for the in-drift corrosion products sub-model to be used in subsequent PAO analyses including the EBS physical and chemical model abstraction effort. This model has been developed to serve as a basis for the in-drift geochemical analyses performed by PAO. However, the concepts discussed within this report may also apply to some near and far-field geochemical processes and may have conceptual application within the unsaturated zone (UZ) and saturated zone (SZ) transport modeling efforts.

  18. Homological Product Codes

    E-Print Network [OSTI]

    Sergey Bravyi; Matthew B. Hastings

    2013-11-04T23:59:59.000Z

    Quantum codes with low-weight stabilizers known as LDPC codes have been actively studied recently due to their simple syndrome readout circuits and potential applications in fault-tolerant quantum computing. However, all families of quantum LDPC codes known to this date suffer from a poor distance scaling limited by the square-root of the code length. This is in a sharp contrast with the classical case where good families of LDPC codes are known that combine constant encoding rate and linear distance. Here we propose the first family of good quantum codes with low-weight stabilizers. The new codes have a constant encoding rate, linear distance, and stabilizers acting on at most $\\sqrt{n}$ qubits, where $n$ is the code length. For comparison, all previously known families of good quantum codes have stabilizers of linear weight. Our proof combines two techniques: randomized constructions of good quantum codes and the homological product operation from algebraic topology. We conjecture that similar methods can produce good stabilizer codes with stabilizer weight $n^a$ for any $a>0$. Finally, we apply the homological product to construct new small codes with low-weight stabilizers.

  19. Summary and comments on the month's production and injection................. Using the production table...................................................................................

    E-Print Network [OSTI]

    #12;Summary and comments on the month's production and injection................. Using the production table................................................................................... Monthly Oil and Gas Production........................................................................ Using

  20. Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

    SciTech Connect (OSTI)

    Stephen Schey

    2009-07-01T23:59:59.000Z

    Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study include a process model and a N2H2 economic assessment model (both developed by the Idaho National Laboratory). Both models are described in this report. The N2H2 model closely tracked and provided similar results as the H2A model and was instrumental in assessing the effects of plant availability on price when operated in the shoulder mode for electrical pricing. Differences between the H2A and N2H2 model are included in this report.

  1. Method for production of magnesium

    DOE Patents [OSTI]

    Diaz, A.F.; Howard, J.B.; Modestino, A.J.; Peters, W.A.

    1998-07-21T23:59:59.000Z

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400 C or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products. 12 figs.

  2. Method for production of magnesium

    DOE Patents [OSTI]

    Diaz, Alexander F. (Cambridge, MA); Howard, Jack B. (Winchester, MA); Modestino, Anthony J. (Hanson, MA); Peters, William A. (Lexington, MA)

    1998-01-01T23:59:59.000Z

    A continuous process for the production of elemental magnesium is described. Magnesium is made from magnesium oxide and a light hydrocarbon gas. In the process, a feed stream of the magnesium oxide and gas is continuously fed into a reaction zone. There the magnesium oxide and gas are reacted at a temperature of about 1400.degree. C. or greater in the reaction zone to provide a continuous product stream of reaction products, which include elemental magnesium. The product stream is continuously quenched after leaving the reaction zone, and the elemental magnesium is separated from other reaction products.

  3. Light cone matrix product

    SciTech Connect (OSTI)

    Hastings, Matthew B [Los Alamos National Laboratory

    2009-01-01T23:59:59.000Z

    We show how to combine the light-cone and matrix product algorithms to simulate quantum systems far from equilibrium for long times. For the case of the XXZ spin chain at {Delta} = 0.5, we simulate to a time of {approx} 22.5. While part of the long simulation time is due to the use of the light-cone method, we also describe a modification of the infinite time-evolving bond decimation algorithm with improved numerical stability, and we describe how to incorporate symmetry into this algorithm. While statistical sampling error means that we are not yet able to make a definite statement, the behavior of the simulation at long times indicates the appearance of either 'revivals' in the order parameter as predicted by Hastings and Levitov (e-print arXiv:0806.4283) or of a distinct shoulder in the decay of the order parameter.

  4. Production of zinc pellets

    DOE Patents [OSTI]

    Cooper, John F. (Oakland, CA)

    1996-01-01T23:59:59.000Z

    Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries.

  5. Production of zinc pellets

    DOE Patents [OSTI]

    Cooper, J.F.

    1996-11-26T23:59:59.000Z

    Uniform zinc pellets are formed for use in batteries having a stationary or moving slurry zinc particle electrode. The process involves the cathodic deposition of zinc in a finely divided morphology from battery reaction product onto a non-adhering electrode substrate. The mossy zinc is removed from the electrode substrate by the action of gravity, entrainment in a flowing electrolyte, or by mechanical action. The finely divided zinc particles are collected and pressed into pellets by a mechanical device such as an extruder, a roller and chopper, or a punch and die. The pure zinc pellets are returned to the zinc battery in a pumped slurry and have uniform size, density and reactivity. Applications include zinc-air fuel batteries, zinc-ferricyanide storage batteries, and zinc-nickel-oxide secondary batteries. 6 figs.

  6. Production of magnesium metal

    DOE Patents [OSTI]

    Blencoe, James G. (Harriman, TN) [Harriman, TN; Anovitz, Lawrence M. (Knoxville, TN) [Knoxville, TN; Palmer, Donald A. (Oliver Springs, TN) [Oliver Springs, TN; Beard, James S. (Martinsville, VA) [Martinsville, VA

    2010-02-23T23:59:59.000Z

    A process of producing magnesium metal includes providing magnesium carbonate, and reacting the magnesium carbonate to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The carbon dioxide is used as a reactant in a second process. In another embodiment of the process, a magnesium silicate is reacted with a caustic material to produce magnesium hydroxide. The magnesium hydroxide is reacted with a source of carbon dioxide to produce magnesium carbonate. The magnesium carbonate is reacted to produce a magnesium-containing compound and carbon dioxide. The magnesium-containing compound is reacted to produce magnesium metal. The invention further relates to a process for production of magnesium metal or a magnesium compound where an external source of carbon dioxide is not used in any of the reactions of the process. The invention also relates to the magnesium metal produced by the processes described herein.

  7. Gulf operators resuming production

    SciTech Connect (OSTI)

    Koen, A.D.

    1992-09-14T23:59:59.000Z

    This paper reports that Gulf of Mexico operators last week were gradually restoring production at installations struck by Hurricane Andrew. The Minerals Management Service continued receiving reports of more damage. By the end of the day Sept. 8, MMS had received reports of damage to 83 pipeline segments and 193 platforms and satellite installations. Damage reports listed 112 installations with structural damage, 13 platforms toppled and five leaning, and 30 satellite platforms toppled and 33 leaning. But despite the extent of damage the storm inflicted on oil and gas installations in the gulf, it pales in comparison to the misery and suffering the storm caused in Florida and Louisiana, an oil company official said.

  8. Hydroprocessing Bio-oil and Products Separation for Coke Production

    SciTech Connect (OSTI)

    Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.

    2013-04-01T23:59:59.000Z

    Fast pyrolysis of biomass can be used to produce a raw bio-oil product, which can be upgraded by catalytic hydroprocessing to hydrocarbon liquid products. In this study the upgraded products were distilled to recover light naphtha and oils and to produce a distillation resid with useful properties for coker processing and production of renewable, low-sulfur electrode carbon. For this hydroprocessing work, phase separation of the bio-oil was applied as a preparatory step to concentrate the heavier, more phenolic components thus generating a more amenable feedstock for resid production. Low residual oxygen content products were produced by continuous-flow, catalytic hydroprocessing of the phase separated bio-oil.

  9. Production design for plate products in the steel industry

    E-Print Network [OSTI]

    Sanjeeb Dash

    2007-04-05T23:59:59.000Z

    Apr 5, 2007 ... Abstract: We describe an optimization tool for a multistage production process for rectangular steel plates. The problem we solve yields a ...

  10. PRODUCTION OF CARBON PRODUCTS USING A COAL EXTRACTION PROCESS

    SciTech Connect (OSTI)

    Dady Dadyburjor; Philip R. Biedler; Chong Chen; L. Mitchell Clendenin; Manoj Katakdaunde; Elliot B. Kennel; Nathan D. King; Liviu Magean; Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo

    2004-08-31T23:59:59.000Z

    This Department of Energy National Energy Technology Laboratory sponsored project developed carbon products, using mildly hydrogenated solvents to extract the organic portion of coal to create synthetic pitches, cokes, carbon foam and carbon fibers. The focus of this effort was on development of lower cost solvents, milder hydrogenation conditions and improved yield in order to enable practical production of these products. This technology is needed because of the long-term decline in production of domestic feedstocks such as petroleum pitch and coal tar pitch. Currently, carbon products represents a market of roughly 5 million tons domestically, and 19 million tons worldwide. Carbon products are mainly derived from feedstocks such as petroleum pitch and coal tar pitch. The domestic supply of petroleum pitch is declining because of the rising price of liquid fuels, which has caused US refineries to maximize liquid fuel production. As a consequence, the long term trend has a decline in production of petroleum pitch over the past 20 years. The production of coal tar pitch, as in the case of petroleum pitch, has likewise declined significantly over the past two decades. Coal tar pitch is a byproduct of metallurgical grade coke (metcoke) production. In this industry, modern metcoke facilities are recycling coal tar as fuel in order to enhance energy efficiency and minimize environmental emissions. Metcoke production itself is dependent upon the production requirements for domestic steel. Hence, several metcoke ovens have been decommissioned over the past two decades and have not been replaced. As a consequence sources of coal tar are being taken off line and are not being replaced. The long-term trend is a reduction in coal tar pitch production. Thus import of feedstocks, mainly from Eastern Europe and China, is on the rise despite the relatively large transportation cost. To reverse this trend, a new process for producing carbon products is needed. The process must be economically competitive with current processes, and yet be environmentally friendly as well. The solvent extraction process developed uses mild hydrogenation of low cost oils to create powerful solvents that can dissolve the organic portion of coal. The insoluble portion, consisting mainly of mineral matter and fixed carbon, is removed via centrifugation or filtration, leaving a liquid solution of coal chemicals and solvent. This solution can be further refined via distillation to meet specifications for products such as synthetic pitches, cokes, carbon foam and fibers. The most economical process recycles 85% of the solvent, which itself is obtained as a low-cost byproduct from industrial processes such as coal tar or petroleum refining. Alternatively, processes have been developed that can recycle 100% of the solvent, avoiding any need for products derived from petroleum or coal tar.

  11. Engineering OpenEngineering Open Product Architectures:Product Architectures

    E-Print Network [OSTI]

    in refereed technical literature, and infusing research outcomes into coursework. The Product Platform and non- uniform demand. This is achieved through the infusion of specific demand modeling techniques

  12. Ultraviolet stimulation of hydrogen peroxide production using aminoindazole, diaminopyridine, and phenylenediamine solid polymer complexes of Zn(II)

    SciTech Connect (OSTI)

    Hayes, Jennifer A.; Schubert, David M.; Amonette, James E.; Nachimuthu, Ponnusamy; Disselkamp, Robert S.

    2008-06-25T23:59:59.000Z

    Hydrogen peroxide is a valuable chemical commodity whose production relies on expensive methods. If an efficient, sustainable, and inexpensive solar-mediated production method could be developed from the reaction between dioxygen and water then its use as a fuel may be possible and gain acceptance. Hydrogen peroxide at greater than 10 M possesses a high specific energy, is environmentally clean, and is easily stored. However, the current method of manufacturing H2O2 via the anthraquinone process is environmentally unfriendly making the unexplored nature of its photochemical production from solar irradiation of interest. Here the concentration and quantum yield of hydrogen peroxide produced in an ultraviolet (UV-B) irradiated environment using aromatic and nitrogen-heterocyclic ring complexes of zinc(II) as solid substrates was studied. The amino-substituted isomers of the substrates indazole, pyridine, and phenylenediamine solid polymer complexes are examined. Samples exposed to the ambient atmosphere (e.g., aerated) were irradiated with a low power lamp with emission from 280-360 nm. Irradiation of various zinc complexes revealed Zn-5-aminoindazole to have the greatest first-day production of 63 mM/day with a 37% quantum yield. Para-phenylenediamine (PPAM) showed the greatest long-term stability and thus suggests H2O2 is produced photocatalytically. Isomeric forms of the catalyst’s organic components (e.g., amino groups) did have an effect on the production. Irradiation of diaminopyridine isomers indicated 2,3-diamino and 3,4-diamino structures were the most productive, each generating 32 mM/day hydrogen peroxide. However, the 2,5-diamino isomer showed no peroxide production. A significant decrease in hydrogen peroxide production in all but PPAM was noticed in the samples, suggesting the possibility of a catalyst poisoning mechanism. The samples ability to produce H2O2 is rationalized by proposing a reaction mechanism and examining the stability of the resonance structures of the different isomers.

  13. Heavy Flavour Production at HERA

    E-Print Network [OSTI]

    Benno List; for the H1; ZEUS Collaborations

    2006-05-19T23:59:59.000Z

    The production of charm and beauty quarks in ep collisions at HERA has been studied by the H1 and ZEUS collaborations. Charm production is generally well described in total rate and in shape by next to leading order (NLO) calculations in perturbative quantum chromodynamics (QCD), although in specific phase space corners the NLO calculations underestimate the observed cross sections. More and more beauty production data are becoming available. For this process, NLO QCD predictions tend to be lower than the measurements.

  14. Comparing Product Development Processes and Managing Risk

    E-Print Network [OSTI]

    Unger, Darian W.

    Product Development Processes (PDPs) require careful design to reduce development time, create better products and manage the risks of bringing new products to market. This paper investigates the relationship between product ...

  15. Product Development Practices for Meeting Financial Objectives

    E-Print Network [OSTI]

    Makumbe, Pedzi

    2009-10-31T23:59:59.000Z

    This paper reports product development practices that separate the most successful product development programs from the rest. A detailed understanding of best product development practices is important because product ...

  16. Productivity Improvement of a Manual Assembly Line

    E-Print Network [OSTI]

    Yerasi, Pranavi

    2012-10-19T23:59:59.000Z

    The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

  17. Coalbed methane production case histories

    SciTech Connect (OSTI)

    Not Available

    1981-02-01T23:59:59.000Z

    The production of methane gas from coal and coal-bearing rocks is one of the prime objectives of the Department of Energy's Methane Recovery from Coalbeds Project. This report contains brief description of wells that are presently producing gas from coal or coal-bearing rocks. Data from three gob gas production areas in Illinois, an in-mine horizontal borehole degasification, and eleven vertical boreholes are presented. Production charts and electric logs of the producing zones are included for some of the wells. Additional information on dry gas production from the San Juan Basin, Colorado/New Mexico and the Greater Green River Coal Region, Colorado/Wyoming is also included.

  18. Covered Product Category: Commercial Fryers

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial fryers, which is a product category covered by the ENERGY STAR program.

  19. Covered Product Category: Commercial Griddles

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance for commercial griddles, which is a product category covered by the ENERGY STAR program

  20. Toda Cathode Materials Production Facility

    Broader source: Energy.gov (indexed) [DOE]

    Cathode Materials Production Facility 2013 DOE Vehicle Technologies Annual Merit Review May 13-17, 2013 David Han, Yasuhiro Abe Toda America Inc. Project ID: ARRAVT017...

  1. Production work up for grabs

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Crossroads effort had dealt the laboratory a tremendous blow as the demands for production seemed to override any scientific research and development. On September 24, 1946,...

  2. Hydrogen production from carbonaceous material

    DOE Patents [OSTI]

    Lackner, Klaus S.; Ziock, Hans J.; Harrison, Douglas P.

    2004-09-14T23:59:59.000Z

    Hydrogen is produced from solid or liquid carbon-containing fuels in a two-step process. The fuel is gasified with hydrogen in a hydrogenation reaction to produce a methane-rich gaseous reaction product, which is then reacted with water and calcium oxide in a hydrogen production and carbonation reaction to produce hydrogen and calcium carbonate. The calcium carbonate may be continuously removed from the hydrogen production and carbonation reaction zone and calcined to regenerate calcium oxide, which may be reintroduced into the hydrogen production and carbonation reaction zone. Hydrogen produced in the hydrogen production and carbonation reaction is more than sufficient both to provide the energy necessary for the calcination reaction and also to sustain the hydrogenation of the coal in the gasification reaction. The excess hydrogen is available for energy production or other purposes. Substantially all of the carbon introduced as fuel ultimately emerges from the invention process in a stream of substantially pure carbon dioxide. The water necessary for the hydrogen production and carbonation reaction may be introduced into both the gasification and hydrogen production and carbonation reactions, and allocated so as transfer the exothermic heat of reaction of the gasification reaction to the endothermic hydrogen production and carbonation reaction.

  3. Optimization Online - Robust Production Management

    E-Print Network [OSTI]

    Vincent Guigues

    2011-02-23T23:59:59.000Z

    Feb 23, 2011 ... Abstract: The problem of production management can often be cast in the form ... We then give the quality of robust solutions obtained by using ...

  4. AGENDA: PETROLEUM PRODUCT TRANSMISSION & DISTRIBUTION

    Broader source: Energy.gov [DOE]

    The agenda for the Quadrennial Energy Review (QER) public stakeholder meeting in New Orleans on petroleum product transmission, distribution, and storage.

  5. Video Production Checklist Gear needed

    E-Print Network [OSTI]

    Jacobs, Laurence J.

    Video Production Checklist Gear needed: · Camera · Tripod · Headphones · Microphone · Memory cards (sunlight, tungsten, fluorescent, etc.) Camera should have an auto white balance setting. · Mic the person

  6. Production of carboxylic acid and salt co-products

    DOE Patents [OSTI]

    Hanchar, Robert J.; Kleff, Susanne; Guettler, Michael V.

    2014-09-09T23:59:59.000Z

    This invention provide processes for producing carboxylic acid product, along with useful salts. The carboxylic acid product that is produced according to this invention is preferably a C.sub.2-C.sub.12 carboxylic acid. Among the salts produced in the process of the invention are ammonium salts.

  7. FISHERY PRODUCTS SITUATION Consumption of fishery products is ex-

    E-Print Network [OSTI]

    . Per -capita sales likely will be near 11.2 pounds--down from 11.4 pounds in 1970. Consumption had beenFISHERY PRODUCTS SITUATION Consumption of fishery products is ex- pected to be off a little in 1971 to attract more imports in 1971 . Since U.S. fish consumption is about 550/0-de- pendent on imports

  8. Universal Product Design: Transforming User Activity Into Product Function

    E-Print Network [OSTI]

    Kostovich, Vincent

    2010-07-14T23:59:59.000Z

    Many people have disabilities and would like to have all of the amenities typical of daily life. Universal product design is important in designing for the disabled and creating user-friendly products for all people. The goal of this thesis...

  9. Biomass-Derived Energy Products and Co-Products Market

    E-Print Network [OSTI]

    -EE0003507 Under Task 4.1: Bioenergy Analyses June 2013 HAWAI`I NATURAL ENERGY INSTITUTE School of Ocean`i Natural Energy Institute School of Ocean and Earth Science and Technology University of Hawai`i June 2013Biomass-Derived Energy Products and Co-Products Market This report identifies the bio-fuels and co

  10. Solar Thermochemical Hydrogen Production Research (STCH): Thermochemic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Thermochemical Hydrogen Production Research (STCH): Thermochemical Cycle Selection and Investment Priority Solar Thermochemical Hydrogen Production Research (STCH):...

  11. Hydrogen Production Infrastructure Options Analysis | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Infrastructure Options Analysis Hydrogen Production Infrastructure Options Analysis Presentation on hydrogen production and infrastructure options presented at the DOE Transition...

  12. Autofermentative Biological Hydrogen Production by Cyanobacteria...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Autofermentative Biological Hydrogen Production by Cyanobacteria Autofermentative Biological Hydrogen Production by Cyanobacteria Presentation by Charles Dismukes, Rutgers...

  13. A Photosynthetic Hydrogel for Catalytic Hydrogen Production ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Photosynthetic Hydrogel for Catalytic Hydrogen Production Home > Research > ANSER Research Highlights > A Photosynthetic Hydrogel for Catalytic Hydrogen Production...

  14. Hydrogenases and Barriers for Biotechnological Hydrogen Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogenases and Barriers for Biotechnological Hydrogen Production Technologies Hydrogenases and Barriers for Biotechnological Hydrogen Production Technologies Presentation by John...

  15. International Conference on Production Research PRODUCT INTERACTIONS MODELLING WITHIN THE SUPPLY CHAIN

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    products, processes and customers along the product lifecycle. These requirements generate19 th International Conference on Production Research PRODUCT INTERACTIONS MODELLING WITHIN concept in the supply chain. This approach considers a product as a service provider or a service

  16. Fission product solvent extraction

    SciTech Connect (OSTI)

    Moyer, B.A.; Bonnesen, P.V.; Sachleben, R.A. [and others

    1998-02-01T23:59:59.000Z

    Two main objectives concerning removal of fission products from high-level tank wastes will be accomplished in this project. The first objective entails the development of an acid-side Cs solvent-extraction (SX) process applicable to remediation of the sodium-bearing waste (SBW) and dissolved calcine waste (DCW) at INEEL. The second objective is to develop alkaline-side SX processes for the combined removal of Tc, Cs, and possibly Sr and for individual separation of Tc (alone or together with Sr) and Cs. These alkaline-side processes apply to tank wastes stored at Hanford, Savannah River, and Oak Ridge. This work exploits the useful properties of crown ethers and calixarenes and has shown that such compounds may be economically adapted to practical processing conditions. Potential benefits for both acid- and alkaline-side processing include order-of-magnitude concentration factors, high rejection of bulk sodium and potassium salts, and stripping with dilute (typically 10 mM) nitric acid. These benefits minimize the subsequent burden on the very expensive vitrification and storage of the high-activity waste. In the case of the SRTALK process for Tc extraction as pertechnetate anion from alkaline waste, such benefits have now been proven at the scale of a 12-stage flowsheet tested in 2-cm centrifugal contactors with a Hanford supernatant waste simulant. SRTALK employs a crown ether in a TBP-modified aliphatic kerosene diluent, is economically competitive with other applicable separation processes being considered, and has been successfully tested in batch extraction of actual Hanford double-shell slurry feed (DSSF).

  17. Production of Pseudoscalar Mesons

    E-Print Network [OSTI]

    W. J. Briscoe; R. A. Arndt; I. I. Strakovsky; R. L. Workman

    2003-10-06T23:59:59.000Z

    Experiments that study the hadronic and electromagnetic production of the pseudoscalar mesons -- pions, etas and kaons, contribute to our knowledge of the properties of baryon and hyperon resonances. Fixed-target programs at hadronic facilities such as BNL-AGS have been phased out. However, the availability of modern experimental facilities with pseudo-monochromatic or tagged medium-energy photon beams at GRAAL, SPring-8, Bonn, Mainz, and Jefferson Lab, together with LEGS, Max-Lab, and HIGS at lower energies, are beginning to produce high-quality results. These new data have smaller statistical uncertainties and better understood systematic uncertainties, than those obtained at the older bremsstrahlung facilities, for measurements of differential and integrated cross sections, as well as polarization and asymmetry. Experimental results are compared with the predictions of QCD-based approaches, such as the lattice-gauge calculations of baryon properties, and Chiral Perturbation Theory applied to threshold photoproduction, and are essential to the performance of Partial-Wave Analyses (PWA). These PWA studies are less model dependent than in the past, and are used in coupled-channels calculations that incorporate unitarity dynamically, and combine results from hadronic reaction channels with electromagnetic processes. This approach is necessary to extract resonance properties and may lead to the discovery of the "missing resonances" predicted by a number of different QCD-inspired calculations. We discuss recent experimental and phenomenological results for single and double pseudoscalar meson hadronic and photoproduction channels with emphasis on the JLab Hall B and the BNL/AGS Crystal Ball programs.

  18. STUDY OF TRANSPORTATION OF GTL PRODUCTS FROM ALASKAN NORTH SLOPE (ANS) TO MARKETS

    SciTech Connect (OSTI)

    Godwin A. Chukwu, Ph.D., P.E.

    2002-09-01T23:59:59.000Z

    The Alaskan North Slope is one of the largest hydrocarbon reserves in the US where Gas-to-Liquids (GTL) technology can be successfully implemented. The proven and recoverable reserves of conventional natural gas in the developed and undeveloped fields in the Alaskan North Slope (ANS) are estimated to be 38 trillion standard cubic feet (TCF) and estimates of additional undiscovered gas reserves in the Arctic field range from 64 TCF to 142 TCF. Transportation of the natural gas from the remote ANS is the key issue in effective utilization of this valuable and abundance resource. The throughput of oil through the Trans Alaska Pipeline System (TAPS) has been on decline and is expected to continue to decline in future. It is projected that by the year 2015, ANS crude oil production will decline to such a level that there will be a critical need for pumping additional liquid from GTL process to provide an adequate volume for economic operation of TAPS. The pumping of GTL products through TAPS will significantly increase its economic life. Transporting GTL products from the North Slope of Alaska down to the Marine terminal at Valdez is no doubt the great challenge facing the Gas to Liquids options of utilizing the abundant natural gas resource of the North Slope. The primary purpose of this study was to evaluate and assess the economic feasibility of transporting GTL products through the TAPS. Material testing program for GTL and GTL/Crude oil blends was designed and implemented for measurement of physical properties of GTL products. The measurement and evaluation of the properties of these materials were necessary so as to access the feasibility of transporting such materials through TAPS under cold arctic conditions. Results of the tests indicated a trend of increasing yield strength with increasing wax content. GTL samples exhibited high gel strengths at temperatures as high as 20 F, which makes it difficult for cold restart following winter shutdowns. Simplified analytical models were developed to study the flow of GTL and GTL/crude oil blends through TAPS in both commingled and batch flow models. The economics of GTL transportations by either commingled or batching mode were evaluated. The choice of mode of transportation of GTL products through TAPS would depend on the expected purity of the product and a trade-off between loss in product value due to contamination and cost of keeping the product pure at the discharge terminal.

  19. Covered Product Category: Fluorescent Ballasts

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and federal efficiency requirements across a variety of product categories, including fluorescent ballasts, which is a FEMP designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  20. WORLD PRODUCTION AND TRADE IN

    E-Print Network [OSTI]

    WORLD PRODUCTION AND TRADE IN FISH MEAL AND OIL UNITED STATES DEPARTMENT OF THE INTERIOR · FISH THIS REPORT IS A GENERAL ACCOUNT OF THE WORLD ' S PRO- DUCTION AND TRADE IN FISH MEAL AND OIL. IN 1959- DICATE WHAT IS INCLUDED BESIDES FISHMEAL AND FISH BODY OIL. #12;WORLD PRODUCTION AND TRADE IN FISH MEAL

  1. Grain Sorghum Production in Texas.

    E-Print Network [OSTI]

    Quinby, J. R.; Kramer, N. W.; Stephens, J. C.; Lahr, K. A.; Karper, R. E.

    1958-01-01T23:59:59.000Z

    . . .- - . . paper 1 the s corn with a rghum rctrose, FIGURE 3. THE BLUEBONNET PLANT OF THE CORN PRODUCTS REFINING COMPANY, CORPUS CHRISTI, TEI'"" 6 clextrose sirup, edible oil, several by-products and t~o livestock feed?. Plants at Plainview, Texas, 1... ................................................................ ................. Industrial Uses %. 6 ................................................................. ................ Sorghum Culture -; . :: 7 ...................................................... Land Preparation . Planting and Cultivation 7...

  2. By By-Products Utilization

    E-Print Network [OSTI]

    Wisconsin-Milwaukee, University of

    Center for By By-Products Utilization THE ROLE OF FLOWABLE SLURRY IN SUSTAINABLE DEVELOPMENTS of Flowable Slurry in Sustainable Developments in Civil Engineering Tarun R. Naik and Rudolph N. Kraus Materials (CLSM) incorporating industrial by-products (coal fly ash, and used foundry sand). CLSM reference

  3. 2013 Domestic Uranium Production Report

    E-Print Network [OSTI]

    Administration (EIA), the statistical and analytical agency within the U.S. Department of Energy. By law, EIA.S. Energy Information Administration | 2013 Domestic Uranium Production Report iii Preface The U.S. Energy://www.eia.doe.gov/glossary/. #12;U.S. Energy Information Administration | 2013 Domestic Uranium Production Report iv Contents

  4. Reheating and Cosmic String Production

    E-Print Network [OSTI]

    Chao-Jun Feng; Xian Gao; Miao Li; Wei Song; Yushu Song

    2008-01-04T23:59:59.000Z

    We compute the string production rate at the end of inflation, using the string spectrum obtained in \\lss in a near-de Sitter space. Our result shows that highly excited strings are hardly produced, thus the simple slow-roll inflation alone does not offer a cosmic string production mechanism.

  5. Open Charm Production at RHIC

    E-Print Network [OSTI]

    Xin Dong

    2005-09-30T23:59:59.000Z

    Recent experimental measurements on open charm production in proton-proton, proton (deuteron)-nucleus and nucleus-nucleus collisions at RHIC are reviewed. A comparison with theoretical predictions is made. Some unsettled issues in open charm production call for precise measurements on directly reconstructed open charm hadrons.

  6. Transverse Energy Production at RHIC

    E-Print Network [OSTI]

    Qun Li; Yang Pang; Nu Xu

    1999-06-18T23:59:59.000Z

    We study the mechanism of transverse energy (E_T) production in Au+Au collisions at RHIC. The time evolution starting from the initial energy loss to the final E_T production is closely examined in transport models. The relationship between the experimentally measured E_T distribution and the maximum energy density achieved is discussed.

  7. Productivity improvement for longwall development

    SciTech Connect (OSTI)

    Whipkey, K. [Norwest, Ashland, KY (United States)

    2005-08-01T23:59:59.000Z

    Industry survey reveals coal operators thoughts about the use of different techniques to keep development ahead of longwall production. Factors considered that can optimise productivity include mine design (the number of entries, size of pillars etc.), work schedules, preventative maintenance programs and good management. The article was adapted from a presentation to Longwall USA 2005, in June 2005 (Pittsburgh, PA, USA). 3 figs.

  8. Diboson production at the Tevatron

    SciTech Connect (OSTI)

    Nodulman, L.J.; CDF and D0 Collaborations

    1996-09-01T23:59:59.000Z

    The CDF and D{null} detectors at the Tevatron Collider are being used to measure {ital WW}, {ital WZ}, and {ital ZZ} production as well as {ital W}{sub {gamma}} and {ital Z}{sub {gamma}} production in order to study Trilinear Gauge Couplings. Improved limits on nonstandard coupling parameters are given and prospects for further improvement are discussed.

  9. Virtual data in CMS production

    SciTech Connect (OSTI)

    Arbree, A. et al.

    2004-08-26T23:59:59.000Z

    Initial applications of the GriPhyN Chimera Virtual Data System have been performed within the context of CMS Production of Monte Carlo Simulated Data. The GriPhyN Chimera system consists of four primary components: (1) a Virtual Data Language, which is used to describe virtual data products, (2) a Virtual Data Catalog, which is used to store virtual data entries, (3) an Abstract Planner, which resolves all dependencies of a particular virtual data product and forms a location and existence independent plan, (4) a Concrete Planner, which maps an abstract, logical plan onto concrete, physical grid resources accounting for staging in/out files and publishing results to a replica location service. A CMS Workflow Planner, MCRunJob, is used to generate virtual data products using the Virtual Data Language. Subsequently, a prototype workflow manager, known as WorkRunner, is used to schedule the instantiation of virtual data products across a grid.

  10. Reducing carbon dioxide to products

    DOE Patents [OSTI]

    Cole, Emily Barton; Sivasankar, Narayanappa; Parajuli, Rishi; Keets, Kate A

    2014-09-30T23:59:59.000Z

    A method reducing carbon dioxide to one or more products may include steps (A) to (C). Step (A) may bubble said carbon dioxide into a solution of an electrolyte and a catalyst in a divided electrochemical cell. The divided electrochemical cell may include an anode in a first cell compartment and a cathode in a second cell compartment. The cathode may reduce said carbon dioxide into said products. Step (B) may adjust one or more of (a) a cathode material, (b) a surface morphology of said cathode, (c) said electrolyte, (d) a manner in which said carbon dioxide is bubbled, (e), a pH level of said solution, and (f) an electrical potential of said divided electrochemical cell, to vary at least one of (i) which of said products is produced and (ii) a faradaic yield of said products. Step (C) may separate said products from said solution.

  11. Tensor-product vs. geometric-product coding

    E-Print Network [OSTI]

    Diederik Aerts; Marek Czachor

    2007-09-10T23:59:59.000Z

    Quantum computation is based on tensor products and entangled states. We discuss an alternative to the quantum framework where tensor products are replaced by geometric products and entangled states by multivectors. The resulting theory is analogous to quantum computation but does not involve quantum mechanics. We discuss in detail similarities and differences between the two approaches and illustrate the formulas by explicit geometric objects where multivector versions of the Bell-basis, GHZ, and Hadamard states are visualized by means of colored oriented polylines.

  12. Capacity analysis, cycle time optimization, and supply chain strategy in multi-product biopharmaceutical manufacturing operations

    E-Print Network [OSTI]

    Fetcho-Phillips, Kacey L. (Kacey Lynn)

    2011-01-01T23:59:59.000Z

    Application of system optimization theory, supply chain principles, and capacity modeling are increasingly valuable tools for use in pharmaceutical manufacturing facilities. The dynamics of the pharmaceutical industry - ...

  13. EPA's designated products in eight categories: Construction Products

    E-Print Network [OSTI]

    folders, clip portfolios, and presentation folders Office furniture Office recycling containers Office tires Miscellaneous Products Awards and plaques Bike racks Blasting grit Industrial drums Manual" program and Comprehensive Procurement Guideline (CPG), designates items that MUST contain recycled

  14. Cross product in N Dimensions - the doublewedge product

    E-Print Network [OSTI]

    Carlo Andrea Gonano; Riccardo Enrico Zich

    2014-07-21T23:59:59.000Z

    The cross product frequently occurs in Physics and Engineering, since it has large applications in many contexts, e.g. for calculating angular momenta, torques, rotations, volumes etc. Though this mathematical operator is widely used, it is commonly expressed in a 3-D notation which gives rise to many paradoxes and difficulties. In fact, instead of other vector operators like scalar product, the cross product is defined just in 3-D space, it does not respect reflection rules and invokes the concept of "handedness". In this paper we are going to present an extension of cross product in an arbitrary number N of spatial Dimensions, different from the one adopted in the Exterior Algebra and explicitly designed for an easy calculus of moments.

  15. TRANSPORTATION ISSUES IN THE DELIVERY OF GTL PRODUCTS FROM ALASKAN NORTH SLOPE TO MARKET

    SciTech Connect (OSTI)

    Godwin Chukwu

    2004-01-01T23:59:59.000Z

    The Alaskan North Slope (ANS) is one of the largest hydrocarbon reserves in the United States where Gas-to-Liquids (GTL) technology can be successfully implemented. The proven and recoverable reserves of conventional natural gas in the developed and undeveloped fields in the Alaskan North Slope (ANS) are estimated to be 38 trillion standard cubic feet (TCF) and estimates of additional undiscovered gas reserves in the Arctic field range from 64 TCF to 142 TCF. Because the domestic gas market in the continental United States is located thousands of miles from the ANS, transportation of the natural gas from the remote ANS to the market is the key issue in effective utilization of this valuable and abundant resource. The focus of this project is to study the operational challenges involved in transporting the gas in converted liquid (GTL) form through the existing Trans Alaska Pipeline System (TAPS). A three-year, comprehensive research program was undertaken by the Petroleum Development Laboratory, University of Alaska Fairbanks, under cooperative agreement No. DE-FC26-98FT40016 to study the feasibility of transporting GTL products through TAPS. Cold restart of TAPS following an extended winter shutdown and solids deposition in the pipeline were identified as the main transportation issues in moving GTL products through the pipeline. The scope of work in the current project (Cooperative Agreement No. DE-FC26-01NT41248) included preparation of fluid samples for the experiments to be conducted to augment the comprehensive research program.

  16. Essays on Product Recalls, New Product Preannouncements, and Shareholder Value

    E-Print Network [OSTI]

    Yun, Wonjoo

    2014-08-08T23:59:59.000Z

    in the automotive 5 industry during 1997-2010. For example, during 2009-2010, Toyota announced 17 recalls (impacting 6.7 million vehicles) due to problems such as unintended acceleration, a sticky brake, and poor vehicle handling (Time 2010). Product... .......................................................................... 1 CHAPTER II DETERMINANTS OF THE LONG-TERM EFFECTS OF PRODUCT RECALLS ON SHAREHOLDER VALUE: AN EMPIRICAL ANALYSIS OF THE AUTOMOBILE INDUSTRY ................................................ 4 Introduction...

  17. Production Specialist mFoundry needs a talented Production Specialist to work on our product development team. The

    E-Print Network [OSTI]

    Ravikumar, B.

    and research for new or complementary products areas. · Support the sales and client services teams throughProduction Specialist mFoundry needs a talented Production Specialist to work on our product development team. The Mobile Production Specialist is responsible for providing graphic and technical

  18. The production of iron carbide

    SciTech Connect (OSTI)

    Anderson, K.M.; Scheel, J. [Nucor Iron Carbide, Inc., Point Lisas (Trinidad and Tobago)

    1997-12-31T23:59:59.000Z

    From start-up in 1994 to present, Nucor`s Iron Carbide plant has overcome many obstacles in achieving design production. Many of these impediments were due to flaws in equipment design. With the integration existing within the plant, limitations in any one system reduced the operating capacity of others. For this reason, as modifications were made and system capacities were increased, the need for additional modifications became apparent. Subsequently, operating practices, maintenance scheduling, employee incentives, and production objectives were continually adapted. This paper discusses equipment and design corrections and the quality issues that contributed to achieving the plant`s production capacity.

  19. Assessment of the Impacts of Standards and Labeling Programs inMexico (four products).

    SciTech Connect (OSTI)

    Sanchez, Itha; Pulido, Henry; McNeil, Michael A.; Turiel, Isaac; della Cava, Mirka

    2007-06-12T23:59:59.000Z

    This study analyzes impacts from energy efficiency standards and labeling in Mexico from 1994 through 2005 for four major products: household refrigerators, room air conditioners, three-phase (squirrel cage) induction motors, and clothes washers. It is a retrospective analysis, seeking to assess verified impacts on product efficiency in the Mexican market in the first ten years after standards were implemented. Such an analysis allows the Mexican government to compare actual to originally forecast program benefits. In addition, it provides an extremely valuable benchmark for other countries considering standards, and to the energy policy community as a whole. The methodology for evaluation begins with historical test data taken for a large number of models of each product type between 1994 and 2005. The pre-standard efficiency of models in 1994 is taken as a baseline throughout the analysis. Model efficiency data were provided by an independent certification laboratory (ANCE), which tested products as part of the certification and enforcement mechanism defined by the standards program. Using this data, together with economic and market data provided by both government and private sector sources, the analysis considers several types of national level program impacts. These include: Energy savings; Environmental (emissions) impacts, and Net financial impacts to consumers, manufacturers and utilities. Energy savings impacts are calculated using the same methodology as the original projections, allowing a comparison. Other impacts are calculated using a robust and sophisticated methodology developed by the Instituto de Investigaciones Electricas (IIE) and Lawrence Berkeley National Laboratory (LBNL), in a collaboration supported by the Collaborative Labeling and Standards Program (CLASP).

  20. Optimizing Profits from Hydroelectricity Production

    E-Print Network [OSTI]

    Potvin, Jean-Yves

    Optimizing Profits from Hydroelectricity Production Daniel De Ladurantaye Michel Gendreau Jean the profits obtained by the stochastic model. Keywords: Hydroelectricity, electricity market, prices, dams countries deregulate their electricity market, new challenges appear for hydroelectricity producers

  1. Production expansion continues to accelerate

    SciTech Connect (OSTI)

    Not Available

    1992-08-01T23:59:59.000Z

    This paper reports that Saudi Arabian Oil Co. (Saudi Aramco) is continuing its accelerated Crude Oil Expansion Program initiated in 1989 that aims at achieving a 10 million bpd productive capacity by 1995. In addition to major engineering, construction and renovation work related to production expansion, Saudi Aramco drilling and workover operations have been markedly expanded. Since January 1991, rig activity has doubled. As an indication of aging of Saudi production, projects include modernizing current injection water treatment facilities, installing a new seawater injection plant on the Persian Gulf, installing dewatering facilities in a number of locations and installing a pilot gas lift project. In addition, equipment orders indicate the new discoveries south of Riyadh may also need the assistance of water injection from inception of production.

  2. User cost in oil production

    E-Print Network [OSTI]

    Adelman, Morris Albert

    1990-01-01T23:59:59.000Z

    The assumption of an initial fixed mineral stock is superfluous and wrong. User cost (resource rent) in mineral production is the present value of expected increases in development cost. It can be measured as the difference ...

  3. Production of virus resistant plants

    DOE Patents [OSTI]

    Dougherty, W.G.; Lindbo, J.A.

    1996-12-10T23:59:59.000Z

    A method of suppressing virus gene expression in plants using untranslatable plus sense RNA is disclosed. The method is useful for the production of plants that are resistant to virus infection. 9 figs.

  4. Heavy flavour production at LHC

    E-Print Network [OSTI]

    Alessandro Grelli; Andre Mischke

    2009-09-25T23:59:59.000Z

    The Large Hadron Collider (LHC) will open a new era in high energy physics. The expected large cross section for heavy flavour production in proton-proton collisions at $\\sqrt{s}$ = 14 TeV will allow detailed studies of the production mechanisms and an extensive test of Quantum Chromodynamics. Since charm and beauty has been proposed as a good probe to study hot and dense QCD matter, the understanding of the production mechanisms in elementary proton-proton collisions is of primary importance as a reference for studies in heavy-ion collisions. In the early phase of LHC operation the experiments will focus on the investigation of the heavy flavour production mechanisms.

  5. Strangeness Production at the SPS

    E-Print Network [OSTI]

    C. Blume; for the NA49 Collaboration

    2009-11-06T23:59:59.000Z

    Systematic studies on the production of strange hyperons and the phi meson as a function of beam energy and system size performed by the NA49 collaboration are discussed. Hadronic transport models fail to describe the production of multi strange particles (Xi, Omega), while statistical models are generally in good agreement to the measured particle yields at all energies. The system size dependence is well reproduced by the core-corona approach. New data on K*(892) production are presented. The yields of these short-lived resonances are significantly below the statistical model expectation. This is in line with the interpretation that the measurable yields are reduced due to rescattering of their decay products inside the fireball.

  6. Lexical influences on disfluency production 

    E-Print Network [OSTI]

    Schnadt, Michael J.

    2009-01-01T23:59:59.000Z

    Natural spoken language is full of disfluency. Around 10% of utterances produced in everyday speech contain disfluencies such as repetitions, repairs, filled pauses and other hesitation phenomena. The production of ...

  7. Strangeness production from pp collisions

    E-Print Network [OSTI]

    Bing-Song Zou; Ju-Jun Xie

    2009-10-23T23:59:59.000Z

    The study of the strangeness production from pp collisions plays important roles in two aspects: exploring the properties of baryon resonances involved and understanding the strangeness production from heavy ion collisions to explore the properties of high energy and high density nuclear matter. Here we review our recent studies on several most important channels for the strangeness production from pp collisions. The previously ignored contributions from Delta*(1620) and N*(1535) resonances are found to play dominant role for the pp --> n K+ Sigma+, pp --> pK+ Lambda and pp --> pp phi reactions near-thresholds. These contributions should be included for further studies on the strangeness production from both pp collisions and heavy ion collisions.

  8. Production, Storage, and FC Analysis

    Broader source: Energy.gov [DOE]

    Presentation on Production, Storage, and FC Analysis to the DOE Systems Analysis Workshop held in Washington, D.C. July 28-29, 2004 to discuss and define role of systems analysis in DOE Hydrogen Program.

  9. Continuous production of conducting polymer

    E-Print Network [OSTI]

    Gaige, Terry A. (Terry Alden), 1981-

    2004-01-01T23:59:59.000Z

    A device to continuously produce polypyrrole was designed, manufactured, and tested. Polypyrrole is a conducting polymer which has potential artificial muscle applications. The objective of continuous production was to ...

  10. Production of virus resistant plants

    DOE Patents [OSTI]

    Dougherty, William G. (Philomath, OR); Lindbo, John A. (Kent, WA)

    1996-01-01T23:59:59.000Z

    A method of suppressing virus gene expression in plants using untranslatable plus sense RNA is disclosed. The method is useful for the production of plants that are resistant to virus infection.

  11. Energy Conservation in Fertilizer Production

    E-Print Network [OSTI]

    Mings, W. J.; Sonnett, W. M.

    1984-01-01T23:59:59.000Z

    An energy efficient fertilizer production device called the Pipe Cross Reactor (PCR) was developed by the National Fertilizer Development Center (NFDC) of the Tennessee Valley Authority (TVA). The Office of Industrial Programs (OIPI of the United...

  12. Oil and Gas Production (Missouri)

    Broader source: Energy.gov [DOE]

    A State Oil and Gas Council regulates and oversees oil and gas production in Missouri, and conducts a biennial review of relevant rules and regulations. The waste of oil and gas is prohibited. This...

  13. Renewable Energy Production Tax Credit

    Broader source: Energy.gov [DOE]

    In June 2006, [http://archive.flsenate.gov/cgi-bin/View_Page.pl?File=sb0888er.html&Dire... S.B. 888] established a renewable energy production tax credit to encourage the development and...

  14. Xcel Energy- Solar Production Incentive

    Broader source: Energy.gov [DOE]

    Beginning in 2014, Xcel must offer a solar production incentive for systems 20 kW-DC or less. The customer's system capacity may not be more than 120% of the customer's on-site annual energy...

  15. Computer Optimization of Steam Production

    E-Print Network [OSTI]

    Todd, C. H.

    1982-01-01T23:59:59.000Z

    As fuel costs continued to rise sharply during the 1970' s, the staff at Exxon's Benicia Refinery realized there was a growing economic incentive to optimize the production of high pressure steam. A significant percentage of the Refinery's total...

  16. Reduction in Unit Steam Production

    E-Print Network [OSTI]

    Gombos, R.

    2004-01-01T23:59:59.000Z

    In 2001 the company's Arch-Brandenburg facility faced increased steam costs due to high natural gas prices and decreased production due to shutdown of a process. The facility was challenged to reduce unit steam consumption to minimize the effects...

  17. Lightning Arrestor Connectors Production Readiness

    SciTech Connect (OSTI)

    Marten, Steve; Linder, Kim; Emmons, Jim; Gomez, Antonio; Hasam, Dawud; Maurer, Michelle

    2008-10-20T23:59:59.000Z

    The Lightning Arrestor Connector (LAC), part “M”, presented opportunities to improve the processes used to fabricate LACs. The A## LACs were the first production LACs produced at the KCP, after the product was transferred from Pinnellas. The new LAC relied on the lessons learned from the A## LACs; however, additional improvements were needed to meet the required budget, yield, and schedule requirements. Improvement projects completed since 2001 include Hermetic Connector Sealing Improvement, Contact Assembly molding Improvement, development of a second vendor for LAC shells, general process improvement, tooling improvement, reduction of the LAC production cycle time, and documention of the LAC granule fabrication process. This report summarizes the accomplishments achieved in improving the LAC Production Readiness.

  18. Primary production of arctic waters

    SciTech Connect (OSTI)

    Rao, D.V.S.; Platt, T.

    1984-01-01T23:59:59.000Z

    Using data that have become available during the last ten years they have reestimated the annual production by phytoplankton in the arctic marine ecosystem. The new figure is some sixteen times higher than an estimate made in 1975. This is of considerable significance regionally, but still does not, of itself, imply that global phytoplankton production is underestimated at present. 82 references, 3 figures, 9 tables.

  19. The Production Coefficients of Feeds

    E-Print Network [OSTI]

    Fraps, G. S. (George Stronach)

    1916-01-01T23:59:59.000Z

    TEXAS AGRICULTURAL EXPERIMENT STATION BULLETIN NO. 185 FEBRUARY, 1916 DIVISION OF CHEMISTRY The Production Coefficients of Feeds POSTOFFICE: COLLEGE STATION, BRAZOS COUNTY, TEXAS [Blank Page in Original Bulletin] TEXAS AGRICULTURAL EXPERIMENT... STATION pp - -- - - BULLETIN NO. 185 FEBRUARY, 1916 DIVISION OF CHEMISTRY The Production Coefficients of Feeds G. S. FRAPS, Ph. D. CHEMIST IN CHARGE; STATE CHEMIST POSTOFFICE: COLLEGE STATION, BRAZOS COUNTY, TEXAS AUSTIN, TEXAS VON BOECKMANN...

  20. Charmonium Production and Corona Effect

    E-Print Network [OSTI]

    S. Digal; H. Satz; R. Vogt

    2011-11-21T23:59:59.000Z

    We study the centrality dependence to be expected if only charmonium production in the corona survives in high energy nuclear collisions, with full suppression in the hot, deconfined core. To eliminate cold nuclear matter effects as far as possible, we consider the ratio of charmonium to open charm production. The centrality dependence of this ratio is found to follow a universal geometric form, applicable to both RHIC and LHC in collisions at central and forward rapidities.

  1. Hierarchical production scheduling in the process industry

    E-Print Network [OSTI]

    Hierarchical production scheduling in the process industry Anna Lindholm Nils-Petter Nytz are handled. The activities are are denoted production scheduling (PS) and detailed production scheduling (DPS. The focus is on production scheduling for chemical process industries with continuous production

  2. Improved inventory and production control on a multi-product production line : seasonality analysis, inventory supermarket, and Kanban design

    E-Print Network [OSTI]

    Zhong, Yuan, M. Eng. Massachusetts Institute of Technology

    2009-01-01T23:59:59.000Z

    This research creates a system to help PDAP Electronics Singapore control its inventories and achieve demand-driven production on a multiple-product production line. One stage is chosen for study in this thesis. An inventory ...

  3. Top production at the LHC

    E-Print Network [OSTI]

    Kanzaki, Junichi; The ATLAS collaboration

    2015-01-01T23:59:59.000Z

    Measurements of the inclusive top quark production cross sections in proton-proton collisions with the ATLAS and CMS detectors at the Large Hadron Collider are presented. The measurements of the precise pair production cross section are performed for di-lepton, semi-leptonic and hadronic final states. Differential measurements of the top transverse momentum and kinematic properties of the top-anti-top pair are also discussed. The results, unfolded to particle and parton level, are compared to recent Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For single top-quark productions cross sections are measured for t-channel, s-channel and W-boson associated production processes. The single top-quark and anti-top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. All measurements are compared to theoretical calculations and the CKM matrix element |Vtb| is determined.

  4. Production Scheduling with Energy Efficiency Constraints

    E-Print Network [OSTI]

    Lee, J.; Kozman, T. A.; Wang, X.

    2007-01-01T23:59:59.000Z

    This research is motivated by a real world production scheduling problem in a continuous manufacturing system involving multiple objectives, multiple products and multiple processing lines with various inventory, production and energy efficiency...

  5. Process improvements during production ramp-up

    E-Print Network [OSTI]

    Chew, Ryan W. (Ryan Wayne)

    2007-01-01T23:59:59.000Z

    Raytheon Company is currently ramping up production radars for a fighter aircraft. This product is doubling production in the next year to meet customer demand; however, the program has not been able to meet the current ...

  6. Heavy flavor production at the Tevatron

    SciTech Connect (OSTI)

    Hatakeyama, K.; /Rockefeller U.

    2006-10-01T23:59:59.000Z

    Results on the inclusive b-jet production, Z + b-jet production, and b-jet production from W + b{bar b} process at the Tevatron are presented.

  7. Probabilistic phonotactics in production 1 Running Head: PROBABILISTIC PHONOTACTICS IN PRODUCTION

    E-Print Network [OSTI]

    Reber, Paul J.

    Probabilistic phonotactics in production 1 Running Head: PROBABILISTIC PHONOTACTICS IN PRODUCTION Phonotactic probability influences speech production Matthew Goldrick and Meredith Larson Department in production 2 Abstract Speakers are faster and more accurate at processing certain sound sequences within

  8. The Compensation Method Applied to a One-Product Production Inventory Problem

    E-Print Network [OSTI]

    Graves, Stephen C.

    This paper considers a one-product, one-machine production/inventory probelm. Demand requests for the product are governed by a Poisson process with demand size being an exponential random variable. The production facility ...

  9. Enhanced Renewable Methane Production System | Argonne National...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enhanced Renewable Methane Production System Technology available for licensing: Enhanced renewable methane production system provides a low-cost process that accelerates...

  10. Briefing Memo: Petroleum Product Transmission & Distribution...

    Energy Savers [EERE]

    Briefing Memo: Petroleum Product Transmission & Distribution Briefing Memo: Petroleum Product Transmission & Distribution Click below to download a PDF of the briefing memo....

  11. Summary of Electrolytic Hydrogen Production: Milestone Completion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrolytic Hydrogen Production: Milestone Completion Report Summary of Electrolytic Hydrogen Production: Milestone Completion Report This report provides an overview of the...

  12. Photoneutron production inside the APS Storage Ring

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    result of three specific processes: giant nuclear dipole resonance, quasi- deuteron production and decay, and intranuclear cascade generated via photopion production. Photoneutron...

  13. 2013 Biological Hydrogen Production Workshop Summary Report ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Biological Hydrogen Production Workshop Summary Report 2013 Biological Hydrogen Production Workshop Summary Report November 2013 summary report for the 2013 Biological Hydrogen...

  14. ROBUST PRODUCTION MANAGEMENT Abstract The problem of ...

    E-Print Network [OSTI]

    2011-01-28T23:59:59.000Z

    The problem of production management can often be cast in the form of a linear ... management contracts modelled as virtual production plants) we need to ...

  15. Strategic Isotope Production | ornl.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Strategic Isotope Production SHARE Strategic Isotope Production Typical capsules used in the transport of 252Cf source material inside heavily shielded shipping casks. ORNL's...

  16. Factorization for hadronic heavy quarkonium production

    E-Print Network [OSTI]

    Jian-Wei Qiu

    2006-10-31T23:59:59.000Z

    We briefly review several models of heavy quarkonium production in hadronic collisions, and discuss the status of QCD factorization for these production models.

  17. Symbiosis: Addressing Biomass Production Challenges and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Symbiosis: Addressing Biomass Production Challenges and Climate Change Symbiosis: Addressing Biomass Production Challenges and Climate Change This presentation was the opening...

  18. Hydrogen Production & Delivery | Department of Energy

    Energy Savers [EERE]

    Hydrogen Production & Delivery Hydrogen Production & Delivery "2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation H2...

  19. Microsoft Word - Tritium Production and Environmental Impacts...

    National Nuclear Security Administration (NNSA)

    Production and Environmental Impacts The production of tritium in a commercial light water reactor (CLWR) is technically straightforward. Most existing CLWRs utilize 12-foot-long...

  20. Water gunks up biofuels production | EMSL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gunks up biofuels production Water gunks up biofuels production Released: August 21, 2014 Findings provide scientific principles to speed up biofuel development Green gold -...

  1. Hydrogen Production Cost Estimate Using Biomass Gasification

    E-Print Network [OSTI]

    Hydrogen Production Cost Estimate Using Biomass Gasification National Renewable Energy Laboratory Panel, Hydrogen Production Cost Estimate Using Biomass Gasification To: Mr. Mark Ruth, NREL, DOE

  2. Increasing Scientific Productivity by Tracking Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data Tracking Increases Scientific Productivity Data Tracking Increases Scientific Productivity July 20, 2011 | Tags: HPSS, NERSC Linda Vu, lvu@lbl.gov, +1 510 486 2402 HPSS...

  3. Advanced Manufacturing Initiative Improves Turbine Blade Productivity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Advanced Manufacturing Initiative Improves Turbine Blade Productivity Advanced Manufacturing Initiative Improves Turbine Blade Productivity May 20, 2011 - 2:56pm Addthis This is an...

  4. Colorado: Energy Modeling Products Support Energy Efficiency...

    Energy Savers [EERE]

    Colorado: Energy Modeling Products Support Energy Efficiency Projects Colorado: Energy Modeling Products Support Energy Efficiency Projects May 1, 2014 - 11:04am Addthis Xcel...

  5. Sandia National Laboratories: Novel Nanoparticle Production Method...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    tiesCapabilitiesNovel Nanoparticle Production Method Could Lead to Better Lights, Lenses, Solar Cells Novel Nanoparticle Production Method Could Lead to Better Lights, Lenses,...

  6. Distributed Hydrogen Production from Natural Gas: Independent...

    Energy Savers [EERE]

    Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report Distributed Hydrogen Production from Natural Gas: Independent Review Panel Report Independent...

  7. Monthly Natural Gas Gross Production Report

    U.S. Energy Information Administration (EIA) Indexed Site

    Report Monthly Natural Gas Gross Production Report Data Files Methodology and Analysis Form and Instructions Monthly Natural Gas Gross Production Report with data for February 2015...

  8. Covered Product Category: Compact Fluorescent Lamps

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance across a variety of product categories, including compact fluorescent lamps (CFLs), which are an ENERGY STAR-qualified product category.

  9. Genomic Prospecting for Microbial Biodiesel Production

    E-Print Network [OSTI]

    Lykidis, Athanasios

    2008-01-01T23:59:59.000Z

    prospecting for microbial biodiesel production AthanasiosAC02-06NA25396. Abstract Biodiesel is defined as fatty acidfor the competitive production of biodiesel. 1. Introduction

  10. Hydrogen Production - Current Technology | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Current Technology Hydrogen Production - Current Technology The development of clean, sustainable, and cost-competitive hydrogen production processes is key to a viable future...

  11. State power plant productivity programs

    SciTech Connect (OSTI)

    Not Available

    1981-02-01T23:59:59.000Z

    The findings of a working group formed to review the status of efforts by utilities and utility regulators to increase the availability and reliability of generating units are presented. Representatives from nine state regulatory agencies, NRRI, and DOE, participated on the Working Group. The Federal government has been working cooperatively with utilities, utility organizations, and with regulators to encourage and facilitate improvements in power plant productivity. Cooperative projects undertaken with regulatory and energy commissions in California, Illinois, New York, Ohio, Texas, North Carolina and Mighigan are described. Following initiation of these cooperative projects, DOE funded a survey to determine which states were explicitly addressing power plant productivity through the regulatory process. The Working Group was formed following completion of this survey. The Working Group emphasized the need for those power plant productivity improvements which are cost effective. The cost effectiveness of proposed availability improvement projects should be determined within the context of opportunities for operating and capital improvements available to an entire utility. The Working Group also identified the need for: allowing for plant designs that have a higher construction cost, but are also more reliable; allowing for recovery and reducing recovery lags for productivity-related capital expenditures; identifying and reducing disincentives in the regulatory process; ascertaining that utilities have sufficient money available to undertake timely maintenance; and support of EPRI and NERC to develop a relevant and accurate national data base. The DOE views these as extremely important aspects of any regulatory program to improve power plant productivity.

  12. Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study

    E-Print Network [OSTI]

    Boyer, Edmond

    Production Leveling (Heijunka) Implementation in a Batch Production System: a Case Study Luciano a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied

  13. Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo

    E-Print Network [OSTI]

    Apel, Sven

    Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo@uni-passau.de Abstract A software product line is a family of software products that share a set of core assets with the goal of reuse. In this paper, we focus on a scenario in which different products from different product

  14. State Support of Domestic Production

    SciTech Connect (OSTI)

    Amy Wright

    2007-12-30T23:59:59.000Z

    This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

  15. Synthesis of Polycyclic Natural Products

    SciTech Connect (OSTI)

    Tuan Hoang Nguyen

    2003-05-31T23:59:59.000Z

    With the continuous advancements in molecular biology and modern medicine, organic synthesis has become vital to the support and extension of those discoveries. The isolations of new natural products allow for the understanding of their biological activities and therapeutic value. Organic synthesis is employed to aid in the determination of the relationship between structure and function of these natural products. The development of synthetic methodologies in the course of total syntheses is imperative for the expansion of this highly interdisciplinary field of science. In addition to the practical applications of total syntheses, the structural complexity of natural products represents a worthwhile challenge in itself. The pursuit of concise and efficient syntheses of complex molecules is both gratifying and enjoyable.

  16. Methanol production method and system

    DOE Patents [OSTI]

    Chen, Michael J. (Darien, IL); Rathke, Jerome W. (Bolingbrook, IL)

    1984-01-01T23:59:59.000Z

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  17. Ethanol production method and system

    DOE Patents [OSTI]

    Chen, M.J.; Rathke, J.W.

    1983-05-26T23:59:59.000Z

    Ethanol is selectively produced from the reaction of methanol with carbon monoxide and hydrogen in the presence of a transition metal carbonyl catalyst. Methanol serves as a solvent and may be accompanied by a less volatile co-solvent. The solution includes the transition metal carbonyl catalysts and a basic metal salt such as an alkali metal or alkaline earth metal formate, carbonate or bicarbonate. A gas containing a high carbon monoxide to hydrogen ratio, as is present in a typical gasifer product, is contacted with the solution for the preferential production of ethanol with minimal water as a byproduct. Fractionation of the reaction solution provides substantially pure ethanol product and allows return of the catalysts for reuse.

  18. Iron production maintenance effectiveness system

    SciTech Connect (OSTI)

    Augstman, J.J. [Dofasco Inc., Hamilton, Ontario (Canada)

    1996-12-31T23:59:59.000Z

    In 1989, an internal study in the Coke and Iron Maintenance Department identified the opportunities available to increase production, by decreasing unscheduled maintenance delays from 4.6%. A five year front loaded plan was developed, and presented to the company president. The plan required an initial investment of $1.4 million and a conservative break-even point was calculated to be 2.5 years. Due to budget restraints, it would have to be self-funded, i.e., generate additional production or savings, to pay for the program. The program began in 1991 at number 2 coke plant and the blast furnaces. This paper will describe the Iron Production Maintenance Effectiveness System (ME), which began with the mechanical and pipefitting trades.

  19. Geometric Qualification of Production Parts

    SciTech Connect (OSTI)

    J. A. Bradley

    2005-09-30T23:59:59.000Z

    Computer Aided Design (CAD) is a commonly utilized software tool to conceptualize and create the part designs that are then used as input for product definition, or for the manufacture of production parts within commercial industry and, more specifically, at the Kansas City Plant (KCP). However, data created on CAD systems is, at times, unable to regenerate within the originating CAD system or be shared or translated for use by a dissimilar CAD system. Commercial software has been developed to help identify or qualify these difficulties that occur in the usage of this data. This project reviewed the different commercial software packages available for the activity of qualification and made recommendations for availability and use in the design processes at the KCP prior to the release of the product definition.

  20. Dynamics of assembly production flow

    E-Print Network [OSTI]

    Ezaki, Takahiro; Nishinari, Katsuhiro

    2015-01-01T23:59:59.000Z

    Despite recent developments in management theory, maintaining a manufacturing schedule remains difficult because of production delays and fluctuations in demand and supply of materials. The response of manufacturing systems to such disruptions to dynamic behavior has been rarely studied. To capture these responses, we investigate a process that models the assembly of parts into end products. The complete assembly process is represented by a directed tree, where the smallest parts are injected at leaves and the end products are removed at the root. A discrete assembly process, represented by a node on the network, integrates parts, which are then sent to the next downstream node as a single part. The model exhibits some intriguing phenomena, including overstock cascade, phase transition in terms of demand and supply fluctuations, nonmonotonic distribution of stockout in the network, and the formation of a stockout path and stockout chains. Surprisingly, these rich phenomena result from only the nature of distr...

  1. Economical Production of Pu-238

    SciTech Connect (OSTI)

    Steven D. Howe; Douglas Crawford; Jorge Navarro; Terry Ring

    2013-02-01T23:59:59.000Z

    All space exploration missions traveling beyond Jupiter must use radioisotopic power sources for electrical power. The best isotope to power these sources is plutonium-238. The US supply of Pu-238 is almost exhausted and will be gone within the next decade. The Department of Energy has initiated a production program with a $10M allocation from NASA but the cost is estimated at over $100 M to get to production levels. The Center for Space Nuclear Research has conceived of a potentially better process to produce Pu-238 earlier and for significantly less cost. The new process will also produce dramatically less waste. Potentially, the front end costs could be provided by private industry such that the government only had to pay for the product produced. Under a NASA Phase I NIAC grant, the CSNR has evaluated the feasibility of using a low power, commercially available nuclear reactor to produce at least 1.5 kg of Pu-238 per year. The impact on the neutronics of the reactor have been assessed, the amount of Neptunium target material estimated, and the production rates calculated. In addition, the size of the post-irradiation processing facility has been established. In addition, a new method for fabricating the Pu-238 product into the form used for power sources has been identified to reduce the cost of the final product. In short, the concept appears to be viable, can produce the amount of Pu-238 needed to support the NASA missions, can be available within a few years, and will cost significantly less than the current DOE program.

  2. West Coast drilling/production

    SciTech Connect (OSTI)

    Rintoul, B.

    1980-01-01T23:59:59.000Z

    Heavy California oil has come into its own as a likely source for increased production. The removal of price controls for crude 16 gravity and lower has given producers incentive, but obstacles remain in the regulatory atmosphere of uncertainty and confusion. Accelerated drilling operations in California aiming at heavy oil production are described. The Elk Hills field continues to be the main site of resurgence of California oil, and steamflooding is the primary method of recovery. Hot plate and hydraulic mining methods also are proposed for heavy oil recovery. Pacific Northwest activities outside of California also are mentioned.

  3. Natural Product Xn on matrices

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache

    2012-02-20T23:59:59.000Z

    This book has eight chapters. The first chapter is introductory in nature. Polynomials with matrix coefficients are introduced in chapter two. Algebraic structures on these polynomials with matrix coefficients is defined and described in chapter three. Chapter four introduces natural product on matrices. Natural product on super matrices is introduced in chapter five. Super matrix linear algebra is introduced in chapter six. Chapter seven claims only after this notion becomes popular we can find interesting applications of them. The final chapter suggests over 100 problems some of which are at research level.

  4. High throughput protein production screening

    DOE Patents [OSTI]

    Beernink, Peter T. (Walnut Creek, CA); Coleman, Matthew A. (Oakland, CA); Segelke, Brent W. (San Ramon, CA)

    2009-09-08T23:59:59.000Z

    Methods, compositions, and kits for the cell-free production and analysis of proteins are provided. The invention allows for the production of proteins from prokaryotic sequences or eukaryotic sequences, including human cDNAs using PCR and IVT methods and detecting the proteins through fluorescence or immunoblot techniques. This invention can be used to identify optimized PCR and WT conditions, codon usages and mutations. The methods are readily automated and can be used for high throughput analysis of protein expression levels, interactions, and functional states.

  5. ARM - PI Product - CSSEF ARMBE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNews :ProductsAerosolProductsCSSEF ARMBE

  6. Forest Products | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the.pdf Flash2006-52.pdf0.pdfDepartment of Energy's FinancialForest Products Forest Products

  7. Antibody-independent Targeted Quantification of TMPRSS2-ERG Fusion Protein Products in Prostate Cancer

    SciTech Connect (OSTI)

    He, Jintang; Sun, Xuefei; Shi, Tujin; Schepmoes, Athena A.; Fillmore, Thomas L.; Petyuk, Vladislav A.; Xie, Fang; Zhao, Rui; Gritsenko, Marina A.; Yang, Feng; Kitabayashi, Naoki; Chae, Sung Suk; Rubin, Mark; Siddiqui, Javed; Wei, John; Chinnaiyan, Arul M.; Qian, Weijun; Smith, Richard D.; Kagan, Jacob; Srivastava, Sudhir; Rodland, Karin D.; Liu, Tao; Camp, David G.

    2014-10-01T23:59:59.000Z

    Fusions between the transmembrane protease serine 2 (TMPRSS2) and ETS related gene (ERG) represent one of the most specific biomarkers that define a distinct molecular subtype of prostate cancer. The studies on TMPRSS2-ERG gene fusions have seldom been performed at the protein level, primarily due to the lack of high-quality antibodies or an antibody-independent method that is sufficiently sensitive for detecting the truncated ERG protein products resulting from TMPRSS2-ERG gene fusions and alternative splicing. Herein, we applied a recently developed PRISM (high-pressure high-resolution separations with intelligent selection and multiplexing)-SRM (selected reaction monitoring) strategy for quantifying ERG protein in prostate cancer cell lines and tumors. The highly sensitive PRISM-SRM assays led to confident detection of 6 unique ERG peptides in either the TMPRSS2-ERG positive cell lines or tissues but not in the negative controls, indicating that ERG protein expression is highly correlated with TMPRSS2-ERG gene rearrangements. Significantly, our results demonstrated for the first time that at least two groups of ERG protein isoforms were simultaneously expressed at variable levels in TMPRSS2-ERG positive samples as evidenced by concomitant detection of two mutually exclusive peptides. Three peptides shared across almost all fusion protein products were determined to be the most abundant peptides, and hence can be used as “signature” peptides for detecting ERG overexpression resulting from TMPRSS2-ERG gene fusion. These PRISM-SRM assays provide valuable tools for studying TMPRSS2-ERG gene fusion protein products, thus improving our understanding of the role of TMPRSS2-ERG gene fusion in the biology of prostate cancer.

  8. Water Requirements for Future Energy production in California

    E-Print Network [OSTI]

    Sathaye, J.A.

    2011-01-01T23:59:59.000Z

    FOR FUTURE ENERGY PRODUCTION STATE'S PERSPECTIVE. CALIFORNIAREQUIREMENTS FOR FUTURE ENERGY PRODUCTION IN CALIFORNIAREQUIREMENTS POR FUTURE ENERGY PRODUCTION IN CALIFORNIA

  9. Water Requirements for Future Energy production in California

    E-Print Network [OSTI]

    Sathaye, Jayant A.; Ritschard, R.L.

    1977-01-01T23:59:59.000Z

    FOR FUTURE ENERGY PRODUCTION STATE'S PERSPECTIVE. CALIFORNIAREQUIREMENTS FOR FUTURE ENERGY PRODUCTION IN CALIFORNIAREQUIREMENTS POR FUTURE ENERGY PRODUCTION IN CALIFORNIA

  10. Fuel from wastewater : harnessing a potential energy source in Canada through the co-location of algae biofuel production to sources of effluent, heat and CO2.

    SciTech Connect (OSTI)

    Passell, Howard David; Whalen, Jake (SmartWhale Consulting, Dartmouth, NS, CA); Pienkos, Philip P. (National Renewable Energy Laboratory, Golden, CO); O'Leary, Stephen J. (National Research Council Canada, Institute for Marine Biosciences, Halifax, NS, CA); Roach, Jesse Dillon; Moreland, Barbara D.; Klise, Geoffrey Taylor

    2010-12-01T23:59:59.000Z

    Sandia National Laboratories is collaborating with the National Research Council (NRC) Canada and the National Renewable Energy Laboratory (NREL) to develop a decision-support model that will evaluate the tradeoffs associated with high-latitude algae biofuel production co-located with wastewater, CO2, and waste heat. This project helps Canada meet its goal of diversifying fuel sources with algae-based biofuels. The biofuel production will provide a wide range of benefits including wastewater treatment, CO2 reuse and reduction of demand for fossil-based fuels. The higher energy density in algae-based fuels gives them an advantage over crop-based biofuels as the 'production' footprint required is much less, resulting in less water consumed and little, if any conversion of agricultural land from food to fuel production. Besides being a potential source for liquid fuel, algae have the potential to be used to generate electricity through the burning of dried biomass, or anaerobically digested to generate methane for electricity production. Co-locating algae production with waste streams may be crucial for making algae an economically valuable fuel source, and will certainly improve its overall ecological sustainability. The modeling process will address these questions, and others that are important to the use of water for energy production: What are the locations where all resources are co-located, and what volumes of algal biomass and oil can be produced there? In locations where co-location does not occur, what resources should be transported, and how far, while maintaining economic viability? This work is being funded through the U.S. Department of Energy (DOE) Biomass Program Office of Energy Efficiency and Renewable Energy, and is part of a larger collaborative effort that includes sampling, strain isolation, strain characterization and cultivation being performed by the NREL and Canada's NRC. Results from the NREL / NRC collaboration including specific productivities of selected algal strains will eventually be incorporated into this model.

  11. On production costs in vertical differentiation models

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    EA 4272 On production costs in vertical differentiation models Dorothée BRECARD(*) 2009,version1-1Oct2009 #12;1 On production costs in vertical differentiation models Dorothée Brécard production cost beside a fixed cost of quality improvement in a duopoly model of vertical product

  12. Aggressive Underwriting and Smart Product Delivery

    Broader source: Energy.gov [DOE]

    Presents AFC First's expert knowledge on lending products, financing, and contractor-friendly loan processes.

  13. Fish production: integrating growth, mortality, and

    E-Print Network [OSTI]

    Limburg, Karin E.

    1 Fish production: integrating growth, mortality, and population density K. Limburg lecture notes, Fisheries Science Outline: 1. Biological production ­ a critical ecological parameter 2. How to compute production from a simple biomass model 3. Production:biomass ratios 4. Growth: mortality ratios Reading

  14. Original article Photosynthesis, leaf area and productivity

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Original article Photosynthesis, leaf area and productivity of 5 poplar clones during; The stem volume and biomass (stem + branches) production, net photosynthesis of mature leaves and leaf area found in volume production, woody biomass production, total leaf area and net photosynthesis. Above

  15. The Scientific Basis of Tobacco Product Regulation

    E-Print Network [OSTI]

    World Health Organization

    2008-01-01T23:59:59.000Z

    copolymers and in synthetic rubber production. 1,3-Butadienesynthetic fibres, resins, plastics, elastomers and rubber (

  16. Establishing Greener Products and Manufacturing Processes

    E-Print Network [OSTI]

    Linke, Barbara; Huang, Yu-Chu; Dornfeld, David

    2012-01-01T23:59:59.000Z

    Hazardous Substances Directive WEEE = Waste Electrical andelectronic products (RoHS, WEEE). Complementary metal oxide

  17. Extending Bass for Improved New Product Forecasting

    E-Print Network [OSTI]

    Wu, David

    for new products is increasingly difficult as the technology treadmill drives product lifecycles shorter and shorter. The task is even more challenging for electronic goods, where product lifecycles are measured that emerges during the product lifecycle. We describe a successful implementation of this model at Intel

  18. Heavy quark production at CDF

    SciTech Connect (OSTI)

    M. Bishai

    2002-12-13T23:59:59.000Z

    Heavy quark production cross-sections, correlations and polarizations have been measured at the Collider Detector at Fermilab (CDF) using 118 pb{sup -1} of data collected from the 1992 to 1995 Run I of the Fermilab Tevatron. There is still disagreement between theoretical predictions of bottom and charm hadro-production cross-sections and the Run I results. The observed transverse momentum spectrum of the prompt J/{psi} production polarization is still not understood. Run II of the Tevatron began in July of 2001 and the CDF Run II detector [11] has collected 70 pb{sup -1} of physics quality data since January 2002. Large statistics of onia states have been collected. Exclusive B meson decay modes have been reconstructed and the SVT level 2 displaced track trigger has produced large samples of D mesons. The prompt charm and b {yields} cX fractions in both charmonium and D meson samples have been measured. Run II is now poised to greatly enhance the knowledge of heavy quark production dynamics well beyond the reach of the Run I detector.

  19. ProductSpecifications Thermo Scientific

    E-Print Network [OSTI]

    Peraire, Jaime

    ProductSpecifications Thermo Scientific CellomicsArrayScan VTI HCS Reader The Thermo Scientific info.cellularimaging@thermofisher.com www.thermo.com/cellomics and Cellular Imaging Europe: +44 118 988 and filters available Integrated Software Features · Thermo Scientific Cellomics iQ - High Content intelligent

  20. Product Sheet Wall Mount Lift

    E-Print Network [OSTI]

    Saskatchewan, University of

    Product Sheet Wall Mount Lift Ergotron® Neo-FlexTM 870-05-061, rev. 12/11/07 www. Less effort. Feel the difference. Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift! CF patented lift-and-pivot motion technology adjusts with a light touch. Raise

  1. Ethanol production by recombinant hosts

    DOE Patents [OSTI]

    Ingram, Lonnie O. (Gainesville, FL); Beall, David S. (Gainesville, FL); Burchhardt, Gerhard F. H. (Gainesville, FL); Guimaraes, Walter V. (Vicosa, BR); Ohta, Kazuyoshi (Miyazaki, JP); Wood, Brent E. (Gainesville, FL); Shanmugam, Keelnatham T. (Gainesville, FL)

    1995-01-01T23:59:59.000Z

    Novel plasmids comprising genes which code for the alcohol dehydrogenase and pyruvate decarboxylase are described. Also described are recombinant hosts which have been transformed with genes coding for alcohol dehydrogenase and pyruvate. By virtue of their transformation with these genes, the recombinant hosts are capable of producing significant amounts of ethanol as a fermentation product. Also disclosed are methods for increasing the growth of recombinant hosts and methods for reducing the accumulation of undesirable metabolic products in the growth medium of these hosts. Also disclosed are recombinant host capable of producing significant amounts of ethanol as a fermentation product of oligosaccharides and plasmids comprising genes encoding polysaccharases, in addition to the genes described above which code for the alcohol dehydrogenase and pyruvate decarboxylase. Further, methods are described for producing ethanol from oligomeric feedstock using the recombinant hosts described above. Also provided is a method for enhancing the production of functional proteins in a recombinant host comprising overexpressing an adhB gene in the host. Further provided are process designs for fermenting oligosaccharide-containing biomass to ethanol.

  2. Ethanol production by recombinant hosts

    DOE Patents [OSTI]

    Fowler, David E. (Gainesville, FL); Horton, Philip G. (Gainesville, FL); Ben-Bassat, Arie (Gainesville, FL)

    1996-01-01T23:59:59.000Z

    Novel plasmids comprising genes which code for the alcohol dehydrogenase and pyruvate decarboxylase are described. Also described are recombinant hosts which have been transformed with genes coding for alcohol dehydrogenase and pyruvate. By virtue of their transformation with these genes, the recombinant hosts are capable of producing significant amounts of ethanol as a fermentation product. Also disclosed are methods for increasing the growth of recombinant hosts and methods for reducing the accumulation of undesirable metabolic products in the growth medium of these hosts. Also disclosed are recombinant host capable of producing significant amounts of ethanol as a fermentation product of oligosaccharides and plasmids comprising genes encoding polysaccharases, in addition to the genes described above which code for the alcohol dehydrogenase and pyruvate decarboxylase. Further, methods are described for producing ethanol from oligomeric feedstock using the recombinant hosts described above. Also provided is a method for enhancing the production of functional proteins in a recombinant host comprising overexpressing an adhB gene in the host. Further provided are process designs for fermenting oligosaccharide-containing biomass to ethanol.

  3. Covered Product Category: Imaging Equipment

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including imaging equipment, which is covered by the ENERGY STAR® program. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  4. Covered Product Category: Commercial Boilers

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for commercial boilers, which is a FEMP-designated product category. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  5. Bakken Shale Oil Production Trends

    E-Print Network [OSTI]

    Tran, Tan

    2012-07-16T23:59:59.000Z

    to study this Type of behavior because of scattering data, which leads to erroneous interpretation for the analysis. These production Types, especially Types I and II will give a new type curve matches for shale oil wells above or below the bubble point....

  6. Integrating Food Production and Biodiversity

    E-Print Network [OSTI]

    with food, and NPK fluxes at farm level. The biofuels were crude rapeseed oil, horse draft, ethanol from a combination of a workhorse and a crude rapeseed oil-fuelled tractor. Ethanol from wheat had the largest impactIntegrating Food Production and Biodiversity Energy and Scale Issues in Implementation Kristina

  7. Medical ice slurry production device

    DOE Patents [OSTI]

    Kasza, Kenneth E. (Palos Park, IL); Oras, John (Des Plaines, IL); Son, HyunJin (Naperville, IL)

    2008-06-24T23:59:59.000Z

    The present invention relates to an apparatus for producing sterile ice slurries for medical cooling applications. The apparatus is capable of producing highly loaded slurries suitable for delivery to targeted internal organs of a patient, such as the brain, heart, lungs, stomach, kidneys, pancreas, and others, through medical size diameter tubing. The ice slurry production apparatus includes a slurry production reservoir adapted to contain a volume of a saline solution. A flexible membrane crystallization surface is provided within the slurry production reservoir. The crystallization surface is chilled to a temperature below a freezing point of the saline solution within the reservoir such that ice particles form on the crystallization surface. A deflector in the form of a reciprocating member is provided for periodically distorting the crystallization surface and dislodging the ice particles which form on the crystallization surface. Using reservoir mixing the slurry is conditioned for easy pumping directly out of the production reservoir via medical tubing or delivery through other means such as squeeze bottles, squeeze bags, hypodermic syringes, manual hand delivery, and the like.

  8. Jet Production Studies at Colliders

    E-Print Network [OSTI]

    Robert Hirosky

    2013-05-02T23:59:59.000Z

    An overview of jet production, measurement techniques, and recent physics results from colliders is presented. Analyses utilizing jets and boson plus jets final states are included and implications of the data are discussed. The results presented here are a snapshot of those available at the time of the PIC 2012 conference in September 2012.

  9. Covered Product Category: Exterior Lighting

    Broader source: Energy.gov [DOE]

    The Federal Energy Management Program (FEMP) provides acquisition guidance and Federal efficiency requirements for outdoor wall-mounted light fixtures or luminaires, outdoor pole/arm-mounted area and roadway luminaires, outdoor pole/arm-mounted decorative luminaires, fuel pump canopy luminaires, bollards, and parking garage luminaires, all of which are FEMP-designated product categories.

  10. Covered Product Category: Fluorescent Luminaires

    Broader source: Energy.gov [DOE]

    FEMP provides acquisition guidance and Federal efficiency requirements across a variety of product categories, including fluorescent luminaires. Federal laws and requirements mandate that agencies meet these efficiency requirements in all procurement and acquisition actions that are not specifically exempted by law.

  11. Technical Analysis of Hydrogen Production

    SciTech Connect (OSTI)

    Ali T-Raissi

    2005-01-14T23:59:59.000Z

    The aim of this work was to assess issues of cost, and performance associated with the production and storage of hydrogen via following three feedstocks: sub-quality natural gas (SQNG), ammonia (NH{sub 3}), and water. Three technology areas were considered: (1) Hydrogen production utilizing SQNG resources, (2) Hydrogen storage in ammonia and amine-borane complexes for fuel cell applications, and (3) Hydrogen from solar thermochemical cycles for splitting water. This report summarizes our findings with the following objectives: Technoeconomic analysis of the feasibility of the technology areas 1-3; Evaluation of the hydrogen production cost by technology areas 1; and Feasibility of ammonia and/or amine-borane complexes (technology areas 2) as a means of hydrogen storage on-board fuel cell powered vehicles. For each technology area, we reviewed the open literature with respect to the following criteria: process efficiency, cost, safety, and ease of implementation and impact of the latest materials innovations, if any. We employed various process analysis platforms including FactSage chemical equilibrium software and Aspen Technologies AspenPlus and HYSYS chemical process simulation programs for determining the performance of the prospective hydrogen production processes.

  12. ProductSpecifications Thermo Scientific

    E-Print Network [OSTI]

    Short, Daniel

    ProductSpecifications Thermo Scientific Niton XL3t GOLDD+ XRF Analyzer The Thermo Scientific Niton XL3t x-ray tube-based x-ray fluorescence (XRF) analyzer with GOLDD+ technology is purpose versatile x-ray tubes ever used in a handheld XRF instrument. When this power is harnessed to our

  13. Ultra-Deepwater Production Systems

    SciTech Connect (OSTI)

    Ken L. Smith; Marc E. Leveque

    2005-05-31T23:59:59.000Z

    The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.

  14. in Engineering Sustainable Product Creation

    E-Print Network [OSTI]

    van der Torre, Leon

    aims to educate engineers who are conscious in the use of all resources, (e.g. energy efficiency, light of engineering skills. Focus on energy, environment and sustainbale growth The Master of Science in Engineering weight design, assembly time), but are also trained to develop products that minimize waste of e

  15. in Engineering Sustainable Product Creation

    E-Print Network [OSTI]

    van der Torre, Leon

    engineers who are conscious in the use of all resources, (e.g. energy efficiency, light weight design. Focus on energy, environment and sustainbale growth The Master of Science in Engineering aims to educate, assembly time), but are also trained to develop products that minimize waste of e.g. material, space

  16. Visualising Early Product Development Information

    E-Print Network [OSTI]

    Salustri, Filippo A.

    screws store energy Electricity Supply Screw User Force couple screw & PSD Installed Screw Waste Energy System Bit Bit Screw Screw Electricity Supply Waste Energy User Force Activation System User Input Architecture Systems Design Design Schematics for visualisation of early product information Light

  17. The ENERGY STAR® Plant Label: A Valuable Component of Strategic Corporate Energy Management

    E-Print Network [OSTI]

    Tunnessen, W.

    2008-01-01T23:59:59.000Z

    ENERGY STAR is the national symbol for energy efficiency and environmental performance recognized by roughly 70% of the American people. In September 2006, the U.S. Environmental Protection Agency (EPA) extend the brand to industrial plants...

  18. INTRODUCTION A research facility is most valuable if it is available when we

    E-Print Network [OSTI]

    Ohta, Shigemi

    physics accelerators, synchrotron light sources, neutron scattering facilities, electron beam facilities and the Bayerisches Geoinstitut in Bayreuth (Germany). In contrast, synchrotron, neutron, and electron beam facilities be as important to the continuing operation of the facility as it is to the success and well-being of the user

  19. Mathematical models of infectious disease dynamics --transmission models --have become valuable tools for

    E-Print Network [OSTI]

    Blower, Sally

    ,anoutbreakofcommunity-acquiredmeticil- lin-resistantStaphylococcusaureus(CA-MRSA).Strainsof CA-MRSA have recently emerged, and one of CA-MRSA in the Los Angeles County Jail (LACJ). We show how to design a within-jail transmission model outbreak; and, third, design effective interventions for outbreak control. The epidemiology of CAMRSA CA-MRSA

  20. Eos,Vol. 85, No. 34, 24 August 2004 made valuable contributions to CALIPSO,and

    E-Print Network [OSTI]

    Hilley, George

    ,Montserrat,Eos Trans.AGU,84(46), Fall Meet.Suppl.,Abstract U31B-0002. Linde,A.,S.I.Sacks,B.Voight,P.E.Malin,E.Shalev, G. Kokelaar,Geol.Soc.London Mem.,21,467­481. Shalev,E.,P.E.Malin,S.Sacks,A.T.Linde,B.Voight, G Sciences,Duke Univer- sity,Durham,N.C.;Alan Linde,Department of Terres- trial Magnetism

  1. Dr. Googin and his early days at Y-12, part 10 ? Googin, a valuable...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    and other activities going on in Building 9202 as being "somewhat of a crossroads for uranium chemistry work in Y-12." John noted that there were many unusual events in the...

  2. Reclaiming a valuable, clean resource Texas cities increasingly embracing potable reuse

    E-Print Network [OSTI]

    Wythe, Kathy

    2013-01-01T23:59:59.000Z

    in this increased interest, Dr. Ellen McDonald, a principal at Alan Plummer Associates, Inc., said because of research conducted over the last #29;#30; to #29;#26; years, the research and profes- sional community has become more comfortable with the fact... disease and to remove organic and inorganic compounds that might be toxic,? he said. #27;e treatment processes used at the Big Spring plant ?have been tested and used elsewhere and shown to be e#21;ective,? McDonald said. As interest in direct...

  3. Photo of the Week: Scouting for Valuable Lessons in Energy | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagementOPAM5Parabolic TroughPhoto Gallery:Energy Scouting for

  4. The ENERGY STAR® Plant Label: A Valuable Component of Strategic Corporate Energy Management 

    E-Print Network [OSTI]

    Tunnessen, W.

    2008-01-01T23:59:59.000Z

    ENERGY STAR is the national symbol for energy efficiency and environmental performance recognized by roughly 70% of the American people. In September 2006, the U.S. Environmental Protection Agency (EPA) extend the brand to industrial plants...

  5. E-Shelters to Teach a Valuable Lesson on Energy | Department of Energy

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0andEnergyGlobal NuclearofCommunication |Does YourDr.

  6. Method to enhance the concentration of valuable minerals in froth flotation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighand Retrievals fromprocess used in mining - Energy Innovation

  7. Essays on Product Recalls, New Product Preannouncements, and Shareholder Value 

    E-Print Network [OSTI]

    Yun, Wonjoo

    2014-08-08T23:59:59.000Z

    in the automotive 5 industry during 1997-2010. For example, during 2009-2010, Toyota announced 17 recalls (impacting 6.7 million vehicles) due to problems such as unintended acceleration, a sticky brake, and poor vehicle handling (Time 2010). Product... attributes data, LexisNexis and Factiva databases for recall announcement date, Center for Research in Security Prices (CRSP) and COMPUSTAT for firm performance and firm attributes, Automotive News Market Data Book for auto vehicle sales, Ward’s Automotive...

  8. ARM - PI Product - Raman lidar/AERI PBL Height Product

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheatProductsISDACProductsRadiative Flux

  9. Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98

    E-Print Network [OSTI]

    Tommelein, Iris D.

    Design and Production Interface in Lean Production: A Performance Improvement Criteria Proposition Proceedings IGLC `98 DESIGN AND PRODUCTION INTERFACE IN LEAN PRODUCTION: A PERFORMANCE IMPROVEMENT CRITERIA PROPOSITION Eduardo L. Isatto1 and Carlos T. Formoso2 ABSTRACT Failures on transferring Japanese production

  10. QUAUTE DES PRODUITS — QUALITY OF PRODUCTS Processing ability of pork products

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    QUAUTE DES PRODUITS — QUALITY OF PRODUCTS Processing ability of pork products B. JACQUET-de-Gaulle, 94700 Maisons-Alfort The first part is devoted to the economics of pig meat products as well in terms of national consumption as in terms of production of fresh, processed and cured products, canned meat

  11. Product development with a focus on attractive product expression: an analysis of case studies

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Product development with a focus on attractive product expression: an analysis of case studies products is vital for a company's endurance in competitive markets. A mix of functionality, ergonomics, aesthetics, symbols and price aspects all play a role in making a product desirable. Some products carry

  12. Contribution of simulation in the product-driven systems production activity control

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    control consists in improving existing manufacturing production planning and control systems. We graduallyContribution of simulation in the product-driven systems production activity control Olivier CARDIN the emergence of product driven production activity control concept, the development of RFID technologies had

  13. Stable reduction product of misonidazole

    SciTech Connect (OSTI)

    Panicucci, R.; McClelland, R.A.; Rauth, A.M.

    1986-07-01T23:59:59.000Z

    The predominant stable product (greater than 80%) of the anaerobic radiation chemical reduction (pH 7, formate, N/sub 2/O) of misonidazole (MISO) has been identified as the cyclic guanidinium ion MISO-DDI, a 4,5-dihydro-4,5-dihydroxyimidazolium ion. This cation was prepared as its sulfate salt by the reaction of glyoxal and the appropriate N-substituted guanidinium sulfate. Its formation during MISO reduction was established by NMR spectral comparison and by derivatization as glyoxal bis-oxime, which was formed in 86% yield in fully reduced systems. The toxicity of pure MISO-DDI X sulfate was examined in vivo (C/sub 3/H mice) and in vitro (CHO cells). This product is less toxic than the parent MISO and free glyoxal. A reactive, short-lived, intermediate is suggested as the agent responsible for the toxicity of MISO under hypoxic conditions.

  14. How Tenneco manages energy productivity

    SciTech Connect (OSTI)

    Glorioso, J.

    1982-08-01T23:59:59.000Z

    Tenneco's energy-management investments are intended to improve energy productivity, and are reported in terms of avoided costs in a way that highlights the energy value of conservation projects. This accounting approach helps management see that the return on conservation projects has increased faster than the rate of inflation. Tenneco's pursuit of higher productivity extends to labor, capital, and materials as well as energy resources. Data collection is the first step, followed by a ranking of possible projects. Continuous monitoring and energy use figures from each plant track the trend of energy value over time. Specific projects at Tenneco's energy-intensive operations of refining, shipbuilding, and food processing illustrate the company's energy management program. (DCK)

  15. West African crude production diversifies

    SciTech Connect (OSTI)

    Aalund, L.

    1983-06-01T23:59:59.000Z

    Nigeria, with its seven crude-oil export streams, dominated West African production and accounted for over 70% of the depressed 1.8 million b/d output from the region last year. However, during the 1970s a flurry of new producing fields, primarily off the African coast, diversified production among a number of countries and touched off a wave of oil activity. The Journal takes a close look at the quality of West African oil in this installment of assays on world export crudes. This issue covers, in alphabetical order, Bonny Light (Nigeria) to Espoir (Ivory Coast). A following issue will wrap up West Africa by presenting assays on crudes from Forcados Blend (Nigeria) to Zaire Crude (Zaire).

  16. Bistatic SAR: Imagery & Image Products.

    SciTech Connect (OSTI)

    Yocky, David A.; Wahl, Daniel E.; Jakowatz, Charles V,

    2014-10-01T23:59:59.000Z

    While typical SAR imaging employs a co-located (monostatic) RADAR transmitter and receiver, bistatic SAR imaging separates the transmitter and receiver locations. The transmitter and receiver geometry determines if the scattered signal is back scatter, forward scatter, or side scatter. The monostatic SAR image is backscatter. Therefore, depending on the transmitter/receiver collection geometry, the captured imagery may be quite different that that sensed at the monostatic SAR. This document presents imagery and image products formed from captured signals during the validation stage of the bistatic SAR research. Image quality and image characteristics are discussed first. Then image products such as two-color multi-view (2CMV) and coherent change detection (CCD) are presented.

  17. HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

    SciTech Connect (OSTI)

    William S. McPhee

    2001-08-31T23:59:59.000Z

    The Department of Energy (DOE) needs improved technologies to decontaminate large areas of both concrete and steel surfaces. The technology should have high operational efficiency, minimize exposures to workers, and produce low levels of secondary waste. In order to meet the DOE's needs, an applied research and development project for the improvement of a current decontamination technology, Vacuum Blasting, is proposed. The objective of this project is to improve the productivity and lower the expense of the existing vacuum blasting technology which has been widely used in DOE sites for removing radioactive contamination, PCBs, and lead-based paint. The proposed work would increase the productivity rate and provide safe and cost-effective decontamination of the DOE sites.

  18. Business Development - Predictive Maintenance Products

    E-Print Network [OSTI]

    Sceiczina, P.

    2005-01-01T23:59:59.000Z

    BUSINESS DEVELOPMENT - PREDICTIVE MAINTENANCE PRODUCTS Phillip Sceiczina, ifm efector, inc. In this time of global competitiveness, more companies are focusing on reducing manufacturing costs to increase profits. Energy costs can be a... significant portion of a company?s manufacturing costs. Compressed air leakage is often an overlooked area in predictive maintenance programs, however it greatly impacts the amount of electricity required to run a plant. This paper quantifies the cost...

  19. XXZ scalar products and KP

    E-Print Network [OSTI]

    O Foda; M Wheeler; M Zuparic

    2009-03-16T23:59:59.000Z

    Using a Jacobi-Trudi-type identity, we show that the scalar product of a general state and a Bethe eigenstate in a finite-length XXZ spin-1/2 chain is (a restriction of) a KP tau function. This leads to a correspondence between the eigenstates and points on Sato's Grassmannian. Each of these points is a function of the rapidities of the corresponding eigenstate, the inhomogeneity variables of the spin chain and the crossing parameter.

  20. The Fedosov *-product in Mathematica

    E-Print Network [OSTI]

    Jaromir Tosiek

    2008-11-14T23:59:59.000Z

    The computer program `Fecom.nb' implementing the Fedosov *-product in Darboux coordinates is presented. It has been written in Mathematica 6.0 but it can be easily modified to be run in some earlier version of Mathematica. To optimize computations elements of the Weyl algebra are treated as polynomials. Several procedures which order the terms are included. The program is available at the web page http://cpc.cs.qub.ac.uk/summaries/AEBU_v1_0.html

  1. Production Hydraulic Packer Field Test

    SciTech Connect (OSTI)

    Schneller, Tricia; Salas, Jose

    2000-06-30T23:59:59.000Z

    In October 1999, the Rocky Mountain Oilfield Testing Center and Halliburton Energy Services cooperated on a field test of Halliburton's new Production Hydraulic Packer technology on Well 46-TPX-10 at Naval Petroleum Reserve No. 3 near Casper, WY. Performance of the packer was evaluated in set and unset operations. The packer's ability to seal the annulus between the casing and tubing was hydraulically tested and the results were recorded.

  2. GE Healthcare Product Guide 2007

    E-Print Network [OSTI]

    Lebendiker, Mario

    GE Healthcare BioProcess Product Guide 2007 #12;How to contact us Europe www.gehealthcare.com/bioprocess or by phone (T), fax (F), and Email Austria T: +43 1 57 606 1613 F: +43 1 57 606 1614 Email: cust.orderde@ge.com Belgium T: 0800 73890 F: 02 416 8206 Email: order.bnl@ge.com Central and East Europe (Austria) T: +43 1

  3. HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

    SciTech Connect (OSTI)

    William S. McPhee

    1999-05-31T23:59:59.000Z

    The objective of this project is to improve the productivity and lower the expense of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCBs, and lead-based paint and provides worker protection by continuously recycling the material and dust for the decontamination tasks. The proposed work would increase the cleaning rate and provide safe and cost-effective decontamination of the DOE sites. This work focuses on redesigning and improving existing vacuum blasting technology including blast head nozzles, ergonomic handling of the blast head by reducing its weight; brush-ring design, vacuum level regulator, efficiency of the dust separator, and operational control sensors. The redesign is expected to enhance the productivity and economy of the vacuum blasting system by at least 50% over current vacuum blasting systems. There are three phases in the project. Phase I consists of developing and testing mathematical models. Phase II consists of pre-prototype design and fabrication and pre-prototype unit testing. Phase III consists of prototype design and field verification testing. In phase I, mathematical models are developed and analyzed for the nozzle, blast head, wind curtain, and dust separator, first as individual devices and then combined as an integrated model. This allows study of respective airflow and design parameters. The Contractor shall, based on the results of the mathematical modeling studies, design experimental models of the components and test these models. In addition, the Contractor shall develop sensors to detect the relationship of the blast head to the blast surfaces and controls to minimize the dependency on an operator's skill and judgment to obtain optimum positioning, as well as real-time characterization sensors to determine as the blast head is moving the depth to which coatings must be removed, thereby improving production and minimizing waste. In phase II, the Contractor shall design and construct a pre-prototype of the nozzle, blast head with wind curtain, sensors, and dust separator and test this system to assess the performance of the new design under controlled conditions at the contractor's facility. In phase III, the Contractor shall design and construct a prototype of the High Productivity Vacuum Blasting System, based on the results of the pre-prototype design and testing performed. This unit will be a full-scale prototype and will be tested at a designated Department of Energy (DOE) facility. Based on the results, the system performance, the productivity, and the economy of the improved vacuum blasting system will be evaluated.

  4. Waste products in highway construction. Final report

    SciTech Connect (OSTI)

    Han, C.

    1993-04-01T23:59:59.000Z

    The report presents waste materials and products for highway construction. The general legislation, local liability, and research projects related to waste materials are outlined. The waste materials and products presented include waste paving materials, industrial ash materials, taconite tailing materials, waste tire rubber materials and products, building rubble materials, incinerator ash products and materials, waste glass materials, waste shingle materials and products, waste plastics products, and slag materials. For each waste category, the legislation and restrictions, material properties, construction and application, field performance, and recycling at the end of service life if available are discussed.

  5. Product Concept Metrics: a Preliminary Study Working Paper

    E-Print Network [OSTI]

    Takala, Roope

    Metrics for product concept evaluation and screening is a relatively unstudied topic of product development.

  6. Product symbolic status: development of a scale to assess different product types 

    E-Print Network [OSTI]

    Wright, James Arthur

    2006-10-30T23:59:59.000Z

    The literature on status, product symbolism, product involvement, and reference group influence is reviewed to conceptually define the Product Symbolic Status construct. The research consisted of two studies (N = 524) that ...

  7. 7th International Conference on Product Lifecycle Management 1 Semantic tags for generative multiview product

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    7th International Conference on Product Lifecycle Management 1 Semantic tags for generative. Conf. Product Lifecycle Management. Biographical notes: Thomas Paviot is an Assistant Professor and the Product Lifecycle Management (PLM) strategy are solutions allowing to achieve objectives of cost

  8. Product symbolic status: development of a scale to assess different product types

    E-Print Network [OSTI]

    Wright, James Arthur

    2006-10-30T23:59:59.000Z

    The literature on status, product symbolism, product involvement, and reference group influence is reviewed to conceptually define the Product Symbolic Status construct. The research consisted of two studies (N = 524) that examined 17 different...

  9. APPROACH TO MULTIPARTICLE PRODUCTION APPROACH TO MULTIPARTICLE PRODUCTION

    E-Print Network [OSTI]

    Boyer, Edmond

    s t a t i s t i c a l d e s c r i p t i o n of multihadron production, t h e p r o b a b i l i t y of an in- c l u s i v e f i n a l s t a t e a is determined by t h e correspon- d i n g l e v e l density d ~ ), i . e . , by t h e number of ex- c l u s i v e configurations compatible with a . I n c l a s s i

  10. ARM - Evaluation Product - MICROBASE Ensemble Data Products (MICROBASEEN)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006Datastreamstwrcam40m Documentation DataDatastreamsxsaprhsrhi1-min (NAVBE1M)DopplerProductsKAZR andfor Cloud

  11. Refinery Net Production of Total Finished Petroleum Products

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghurajiConventionalMississippi"site.1 Relative Standard Errors for TableCORPORATION /Product: Total

  12. Transmutation of high-level radioactive waste and production of {sup 233}U using an accelerator-driven reactor

    SciTech Connect (OSTI)

    Takahashi, Hiroshi; Takashita, Hirofumi; Chen, Xinyi

    1994-08-01T23:59:59.000Z

    Reactor safety, the disposal of high-level nuclear waste, and nonproliferation of nuclear material for military purposes are the problems of greatest concern for nuclear energy. Technologies for accelerators developed in the field of high-energy physics can contribute to solving these problems. For reactor safety, especially for that of a Na-cooled fast reactor, the use of an accelerator, even a small one, can enhance the safety using a slightly subcritical reactor. There is growing concern about how we can deal with weapons-grade Pu, and about the large amount of Pu accumulating from the operation of commercial reactors. It has been suggested that this Pu could be incinerated, using the reactor and a proton accelerator. However, because Pu is a very valuable material with future potential for generating nuclear energy, we should consider transforming it into a proliferation-resistant material that cannot be used for making bombs, rather than simply eliminating the Pu. An accelerator-driven fast reactor (700 MWt), run in a subcritical condition, and fueled with MOX can generate {sup 233}U more safely and efficiently than can a critical reactor. We evaluate the production of {sup 233}U, {sup 239}Pu, and the transmutation of the long-lived fission products of {sup 99}Tc and {sup 129}I, which are loaded with YH{sub 1.7} between the fast core and blanket, by reducing the conversion factor of Pu to {sup 233}U. And we assessed the rates of radiation damage, hydrogen production, and helium production in a target window and in the surrounding vessel.

  13. Low Cost Hydrogen Production Platform

    SciTech Connect (OSTI)

    Timothy M. Aaron, Jerome T. Jankowiak

    2009-10-16T23:59:59.000Z

    A technology and design evaluation was carried out for the development of a turnkey hydrogen production system in the range of 2.4 - 12 kg/h of hydrogen. The design is based on existing SMR technology and existing chemical processes and technologies to meet the design objectives. Consequently, the system design consists of a steam methane reformer, PSA system for hydrogen purification, natural gas compression, steam generation and all components and heat exchangers required for the production of hydrogen. The focus of the program is on packaging, system integration and an overall step change in the cost of capital required for the production of hydrogen at small scale. To assist in this effort, subcontractors were brought in to evaluate the design concepts and to assist in meeting the overall goals of the program. Praxair supplied the overall system and process design and the subcontractors were used to evaluate the components and system from a manufacturing and overall design optimization viewpoint. Design for manufacturing and assembly (DFMA) techniques, computer models and laboratory/full-scale testing of components were utilized to optimize the design during all phases of the design development. Early in the program evaluation, a review of existing Praxair hydrogen facilities showed that over 50% of the installed cost of a SMR based hydrogen plant is associated with the high temperature components (reformer, shift, steam generation, and various high temperature heat exchange). The main effort of the initial phase of the program was to develop an integrated high temperature component for these related functions. Initially, six independent concepts were developed and the processes were modeled to determine overall feasibility. The six concepts were eventually narrowed down to the highest potential concept. A US patent was awarded in February 2009 for the Praxair integrated high temperature component design. A risk analysis of the high temperature component was conducted to identify any potential design deficiency related to the concept. The analysis showed that no fundamental design flaw existed with the concept, but additional simulations and prototypes would be required to verify the design prior to fabricating a production unit. These identified risks were addressed in detail during Phase II of the development program. Along with the models of the high temperature components, a detailed process and 3D design model of the remainder of system, including PSA, compression, controls, water treatment and instrumentation was developed and evaluated. Also, in Phase II of the program, laboratory/fullscale testing of the high temperature components was completed and stable operation/control of the system was verified. The overall design specifications and test results were then used to develop accurate hydrogen costs for the optimized system. Praxair continued development and testing of the system beyond the Phase II funding provided by the DOE through the end of 2008. This additional testing is not documented in this report, but did provide significant additional data for development of a prototype system as detailed in the Phase III proposal. The estimated hydrogen product costs were developed (2007 basis) for the 4.8 kg/h system at production rates of 1, 5, 10, 100 and 1,000 units built per year. With the low cost SMR approach, the product hydrogen costs for the 4.8 kg/h units at 50 units produced per year were approximately $3.02 per kg. With increasing the volume production to 1,000 units per year, the hydrogen costs are reduced by about 12% to $2.67 per kg. The cost reduction of only 12% is a result of significant design and fabrication efficiencies being realized in all levels of production runs through utilizing the DFMA principles. A simplified and easily manufactured design does not require large production volumes to show significant cost benefits. These costs represent a significant improvement and a new benchmark in the cost to produce small volume on-site hydrogen using existing process technologies. The cost mo

  14. Global product development in semiconductor industry : Intel -- Tick-Tock product development cadence

    E-Print Network [OSTI]

    Park, Cheolmin, S.M. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    This thesis investigates on changes in semiconductor industry's product development methodology by following Intel's product development from year 2000. Intel was challenged by customer's preference change, competitors new ...

  15. Process for the removal of acid forming gases from exhaust gases and production of phosphoric acid

    DOE Patents [OSTI]

    Chang, Shih-Ger (El Cerrito, CA); Liu, David K. (San Pablo, CA)

    1992-01-01T23:59:59.000Z

    Exhaust gases are treated to remove NO or NO.sub.x and SO.sub.2 by contacting the gases with an aqueous emulsion or suspension of yellow phosphorous preferably in a wet scrubber. The addition of yellow phosphorous in the system induces the production of O.sub.3 which subsequently oxidizes NO to NO.sub.2. The resulting NO.sub.2 dissolves readily and can be reduced to form ammonium ions by dissolved SO.sub.2 under appropriate conditions. In a 20 acfm system, yellow phosphorous is oxidized to yield P.sub.2 O.sub.5 which picks up water to form H.sub.3 PO.sub.4 mists and can be collected as a valuable product. The pressure is not critical, and ambient pressures are used. Hot water temperatures are best, but economics suggest about 50.degree. C. The amount of yellow phosphorus used will vary with the composition of the exhaust gas, less than 3% for small concentrations of NO, and 10% or higher for concentrations above say 1000 ppm. Similarly, the pH will vary with the composition being treated, and it is adjusted with a suitable alkali. For mixtures of NO.sub.x and SO.sub.2, alkalis that are used for flue gas desulfurization are preferred. With this process, better than 90% of SO.sub.2 and NO in simulated flue gas can be removed. Stoichiometric ratios (P/NO) ranging between 0.6 and 1.5 were obtained.

  16. Conversion of high carbon refinery by-products. Quarterly report, January 1--March 31, 1996

    SciTech Connect (OSTI)

    Katta, S.; Henningsen, G.; Lin, Y.Y.; O`Donnell, J.

    1996-04-26T23:59:59.000Z

    The overall objective of the project is to demonstrate that a partial oxidation system, which utilizes a transport reactor, is a viable means of converting refinery wastes, byproducts, and other low value materials into valuable products. The primary product would be a high quality fuel gas, which could also be used as a source of hydrogen. The concept involves subjecting the hydrocarbon feed to pyrolysis and steam gasification in a circulating bed of solids. Carbon residue formed during pyrolysis, as well as metals in the feed, are captured by the circulating solids which are returned to the bottom of the transport reactor. Air or oxygen is introduced in this lower zone and sufficient carbon is burned, sub-stoichiometrically, to provide the necessary heat for the endothermic pyrolysis and gasification reactions. The hot solids and gases leaving this zone pass upward to contact the feed material and continue the gasification process. The Transport Reactor Test Unit (TRTU) was commissioned to conduct studies on pyrolysis of Rose Bottoms using spent FCC (Fluid Catalytic Cracker) catalyst as the circulating medium and gasification of this carbon over a temperature range of 1,600 to 1,700 F. The Rose Bottoms (Residuum Oil Supercritical Extraction) was produced in the Rose unit. Studies were done in the Bench Scale Reactor Unit (BRU) to develop suitable catalyst formulations and to study the steam reforming of methane and propane in support of the experiments to be conducted in the TRTU. Studies were also conducted on gasification of coke breeze, petroleum cokes and carbon deposited on FCC catalyst. The catalytic effect of potassium on gasification of these solids was studied. Studies were conducted in the CFS (cold flow simulator) to investigate flow problems experienced in the TRTU. Results from these studies are presented in this report.

  17. Chemical production from industrial by-product gases: Final report

    SciTech Connect (OSTI)

    Lyke, S.E.; Moore, R.H.

    1981-04-01T23:59:59.000Z

    The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

  18. Product grammar : construction and exploring solution spaces

    E-Print Network [OSTI]

    Chin, Ryan C. C., 1974-

    2004-01-01T23:59:59.000Z

    Developing a design methodology that accounts for system- and component-level parameters in the design of products is a challenge for design and manufacturing organizations. Designed products like automobiles, personal ...

  19. Adaptive control for optimizing microalgae production

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Adaptive control for optimizing microalgae production Francis Mairet Rafael Mu for light-limited microalgae culture. This controller regulates the light absorption factor, defined productivity under day-night cycles. Keywords: Nonlinear controller, Microalgae, Optimization, Biomass

  20. Colorado Statewide Forest Products Industry Profile

    E-Print Network [OSTI]

    Colorado Statewide Forest Products Industry Profile Economic Sustainability and Ecological and Comparisons · Production and Processing · Sales and Markets · Economic and Ecological Contributions Sawmills · 1/4 for Roundwood (post and pole, vigas, house logs), furniture, excelsior etc. ­ Sawmill

  1. Process management applications in biopharmaceutical drug production

    E-Print Network [OSTI]

    Smith, Stephen E

    2011-01-01T23:59:59.000Z

    Genzyme's manufacturing and supply chain organization is responsible for the production and delivery of medically necessary medicines for patients with rare diseases around the world. Because of the nature of the products ...

  2. SP.778 Toy Product Design, Spring 2007

    E-Print Network [OSTI]

    Kudrowitz, Barry M. (Barry Matthew)

    Toy Product Design is a MIT Public Service Center learning design course offered in the Spring semester. This course is an introduction to the product design process with a focus on designing for play and entertainment. ...

  3. Petroleum: The Petroleum (Production) (Amendment) Regulations, 1957 

    E-Print Network [OSTI]

    Her Majesty's Stationary Office

    1957-01-01T23:59:59.000Z

    These Regulations amend the Petroleum (Production) Regulations, 1935, which set out the requirements for applications for, and the model clauses to be incorporated in, prospecting and mining licences issued under the Petroleum (Production) Act, 1934...

  4. Speech production knowledge in automatic speech recognition 

    E-Print Network [OSTI]

    King, Simon; Frankel, Joe; Livescu, Karen; McDermott, Erik; Richmond, Korin; Wester, Mirjam

    2007-01-01T23:59:59.000Z

    Although much is known about how speech is produced, and research into speech production has resulted in measured articulatory data, feature systems of different kinds and numerous models, speech production knowledge is almost totally ignored...

  5. Top Quark Production at the LHC

    E-Print Network [OSTI]

    Francesco Spanò; for the ATLAS; CMS collaborations

    2011-12-16T23:59:59.000Z

    Top quark production in proton proton collisions at the Large Hadron Collider (LHC) is reviewed using data collected by the ATLAS and CMS detectors. Most recent results on searches for new physics related to top quark production mechanism are included.

  6. Hadron Production in Heavy Ion Collisions

    E-Print Network [OSTI]

    Helmut Oeschler; Hans Georg Ritter; Nu Xu

    2009-08-12T23:59:59.000Z

    We review hadron production in heavy ion collisions with emphasis on pion and kaon production at energies below 2 AGeV and on partonic collectivity at RHIC energies.

  7. Nigerian refineries strive for product balance

    SciTech Connect (OSTI)

    Obuasi, P.A.

    1985-06-17T23:59:59.000Z

    This article discusses the growth patterns of the Nigerian refining industry. Production and consumption are expected to follow the pattern of consumption of fuel products by the domestic market, Presently, however, production and consumption are not evenly balanced for most fuel products, and non-fuel products are domestically consumed but not produced. Some progress has been made in the effort to match production and consumption of fuel products. But the progress that would have been made to balance non-fuel products has been nullified by 50% of the Daduna refinery being idle. This is due to problems associated with importation of heavy crude oil into Nigeria and also a weak market for asphalt in Nigeria.

  8. Information and Communication in Lean Product Development

    E-Print Network [OSTI]

    Graebsch, Martin

    In this thesis, the implications and influences that information and communication impose on lean product development in general, as well as the development of a lean Product Development Value Stream Display (lean PDVSD) ...

  9. Intelligent Time-Successive Production Modeling

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    ;Background · Production Data Analysis Decline Curve Analysis (Arps, 1945) Type Curve Matching (Fetkovich Analysis Pressure Data + Production Rate Data ·Material Balance methods ·Pseudo time and pseudo pressure

  10. Dynamic simulation of nuclear hydrogen production systems

    E-Print Network [OSTI]

    Ramírez Muñoz, Patricio D. (Patricio Dario)

    2011-01-01T23:59:59.000Z

    Nuclear hydrogen production processes have been proposed as a solution to rising CO 2 emissions and low fuel yields in the production of liquid transportation fuels. In these processes, the heat of a nuclear reactor is ...

  11. Modes of Production and Social Formations

    E-Print Network [OSTI]

    Amin, Samir

    1974-01-01T23:59:59.000Z

    and from slavery to feudalism. production are not Onmode of production: hence feudalism rested on an embryonicThis Zapse int o feudalism appeared as a regression and a

  12. Optimal Model-Based Production Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 Optimal Model-Based Production Planning for Refinery Operation Abdulrahman Alattas Advisor;2 Outline Introduction Problem Statement Refinery Planning Model Development LP Planning Models NLP Planning Models Conclusion #12;3 Introduction Refinery production planning models Optimizing refinery

  13. Optimal Model-Based Production Planning

    E-Print Network [OSTI]

    Grossmann, Ignacio E.

    1 Optimal Model-Based Production Planning for Refinery Operation Abdulrahman Alattas Advisor Steam distillation column Conclusion #12;3 Introduction Refinery production planning models Optimizing refinery operation Crude selection Maximizing profit; minimizing cost LP-based, linear process unit

  14. Financial modeling of new product development economics

    E-Print Network [OSTI]

    Balasubramaniam, Anitha

    2014-01-01T23:59:59.000Z

    Product design and development is a complex process that involves extensive engineering considerations as well as management decisions based on the overall vision for the product. Traditionally, most decision making in ...

  15. Product management in software as a service

    E-Print Network [OSTI]

    Rajasekharan, Karthikeyan

    2012-01-01T23:59:59.000Z

    Software product management within Software as a Service is key domain of interest given the recent advances in Cloud Computing. This thesis explores the product management challenges within this domain. It makes a ...

  16. Risk Management in Lean Product Development

    E-Print Network [OSTI]

    Oehmen, Josef

    This whitepaper summarizes 15 years of research conducted at MIT's Lean Advancement Initiative on the topic of risk management in product design and development. It discusses current challenges in risk management for product ...

  17. Breakthrough: Better Fiber for Better Products

    ScienceCinema (OSTI)

    Griffith, George; Garnier, John;

    2013-05-28T23:59:59.000Z

    Researchers at Idaho National Laboratory have developed a cost-effective method for the continuous production of alpha silicon carbide fiber. The exceptionally strong, lightweight fiber could enable significant performance improvements in many everyday products.

  18. Energy Impacts of Productivity Improvements in Manufacturing 

    E-Print Network [OSTI]

    Mitrovic, B.; Muller, M. R.

    2002-01-01T23:59:59.000Z

    for potential improvements in energy use in concert with examination of waste streams and potential productivity improvements. The benefits of this new approach are substantial in particular with respect to productivity improvements. Such projects are much...

  19. Covered Product Category: Uninterruptible Power Supplies (for...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Applications) Covered Product Category: Uninterruptible Power Supplies (for Data Center, Computer, and Telecommunication Applications) The Federal Energy Management...

  20. Identification of demand in differentiated products markets

    E-Print Network [OSTI]

    Megerdichian, Aren

    2010-01-01T23:59:59.000Z

    Characteristics . . . . . . . OLS and CX Estimates, Product-2.3 Conditional Exogeneity (CX) . . . . . . . . iv Models ofAIDS CX . . . . . . . . . Simulation . . . . . . . . Merger

  1. Ultraviolet stimulation of hydrogen peroxide production using...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ultraviolet stimulation of hydrogen peroxide production using aminoindazole, diaminopyridine, and phenylenediamine solid polymer Ultraviolet stimulation of hydrogen peroxide...

  2. Isotope Development & Production | Nuclear Science | ORNL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Medical Radioisotope Radiochemical Separation & Processing Strategic Isotope Production Super Heavy Element Discovery Nuclear Security Science & Technology Nuclear Systems...

  3. Updated Cost Analysis of Photobiological Hydrogen Production...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis of Photobiological Hydrogen Production from Chlamydomonas reinhardtii Green Algae: Milestone Completion Report Updated Cost Analysis of Photobiological Hydrogen...

  4. Sandia National Laboratories: Solar Thermochemical Hydrogen Production

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in Materials & Components Compatibility Hydrogen Behavior Quantitative Risk Assessment Hydrogen Infrastructure Solar Thermochemical Hydrogen Production Market Transformation...

  5. Establishing Greener Products and Manufacturing Processes

    E-Print Network [OSTI]

    Linke, Barbara; Dornfeld, David; Huang, Yu-Chu

    2011-01-01T23:59:59.000Z

    = LCI = Mfg = MRR = RoHS = WEEE = Application programmingelectronic products (RoHS, WEEE). Complementary metal oxide

  6. Fall 2013 Composite Data Products - Backup Power

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Ainscough, C.; Saur, G.; Post, M.; Peters, M.

    2013-12-01T23:59:59.000Z

    This report includes 28 composite data products (CDPs) produced in Fall 2013 for fuel cell backup power systems.

  7. Spring 2014 Composite Data Products: Backup Power

    SciTech Connect (OSTI)

    Kurtz, J.; Sprik, S.; Saur, G.

    2014-06-01T23:59:59.000Z

    This report includes 30 composite data products (CDPs) produced in Spring 2014 for fuel cell backup power systems.

  8. System for thermochemical hydrogen production

    DOE Patents [OSTI]

    Werner, R.W.; Galloway, T.R.; Krikorian, O.H.

    1981-05-22T23:59:59.000Z

    Method and apparatus are described for joule boosting a SO/sub 3/ decomposer using electrical instead of thermal energy to heat the reactants of the high temperature SO/sub 3/ decomposition step of a thermochemical hydrogen production process driven by a tandem mirror reactor. Joule boosting the decomposer to a sufficiently high temperature from a lower temperature heat source eliminates the need for expensive catalysts and reduces the temperature and consequent materials requirements for the reactor blanket. A particular decomposer design utilizes electrically heated silicon carbide rods, at a temperature of 1250/sup 0/K, to decompose a cross flow of SO/sub 3/ gas.

  9. Ultra-Deepwater Production Systems

    SciTech Connect (OSTI)

    K. L. Smith; M. E. Leveque

    2004-09-30T23:59:59.000Z

    This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

  10. Energy Production | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube|6721 FederalTexas Energy Incentive Programs,EnergyAugustPublic Law ofProduction

  11. 2014 Domestic Uranium Production Report

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 111 1,613 122 40Coal Stocks at Commercial andSeptember 25,9,1996 N Y MDomestic Uranium Production

  12. Domestic Uranium Production Report - Quarterly

    Gasoline and Diesel Fuel Update (EIA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for On-Highway4,1,50022,3,,,,6,1,9,1,50022,3,,,,6,1,Decade Year-0E (2001)gasoline353/06) 2Yonthly Energy :and1. Total production

  13. Product Guide Category Prices Volumes

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14Table 4. U.S.Feet)348,016.012,444.5Product

  14. ARM - PI Product - Cloudnet Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheat fluxChinaNewsRate RetrievalsProductsCloudnet

  15. ARM - PI Product - ISDAC Microphysics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625govInstrumentstdmadap Documentation TDMADAP : XDCnarrowbandheatProductsISDAC Microphysics ARM Data Discovery Browse

  16. Production Wells | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal PwerPerkins County, Nebraska:Precourt Institute for EnergyWister|Production Wells (Redirected

  17. Sunforce Products | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolar Jump to: navigation,SunElectra JumpSundanceSunforce Products Jump

  18. Imports and Exports of Fishery Products

    E-Print Network [OSTI]

    Imports and Exports of Fishery Products Annual Summary, 2001 IMPORTS. U.S. imports of edible of fishery products were imported. EXPORTS. U.S. exports of edible fishery products of domestic origin were 1,139,744 tons valued at $3.1 billion, compared with 948,025 tons at $2.8 billion exported in 2000

  19. Imports and Exports of Fishery Products

    E-Print Network [OSTI]

    Imports and Exports of Fishery Products Annual Summary, 2000 IMPORTS. U.S. imports of edible.0 billion of fishery products were imported. EXPORTS. U.S. exports of edible fishery products of domestic origin were 948,025 tons valued at $2.8 billion, compared with 864,166 tons at $2.7 billion exported

  20. Properly Evaluating load-following products

    SciTech Connect (OSTI)

    Cavicchi, Joseph; Lemon, Andrew

    2009-01-15T23:59:59.000Z

    The authors briefly survey the jurisdictions where load-following products have been successfully used, examine the characteristics of the load-following products, and explain the shortcomings and inaccurate conclusions of previous analyses. A more thorough analysis reveals that the load-following products fulfill the public policy objectives for which they have been designed and do not adversely impact wholesale electricity markets.