Sample records for va state standards

  1. 1michigan state university brand STandardS BRAND STANDARDS

    E-Print Network [OSTI]

    1michigan state university brand STandardS BRAND STANDARDS VERSION 4, APRIL 30, 2012 #12;2michigan state university brand STandardS TABLE OF CONTENTS 3 brand baSicS 5 The Michigan STaTe UniverSiTy brandUrTher gUidance #12;3michigan state university brand STandardS 1. BrANd BASICS 1a whaT iS a brand? We build

  2. Energy Standards for State Buildings

    Broader source: Energy.gov [DOE]

    The State is still required by statute to adopt planning and construction standards for state buildings that conserve energy and optimize the energy performance of new buildings. The standards mu...

  3. Portland State University Identity Standards

    E-Print Network [OSTI]

    Bertini, Robert L.

    Portland State University Identity Standards #12;3 Introduction 4 Key Messages 5 Identity Basics 8 for applying a consistent look, feel, voice, and tone for all Portland State University communications. Graphic identity standards enhance communication with our constituents. They distinguish Portland State from other

  4. New State Standards

    E-Print Network [OSTI]

    Lopez, F. A.

    2011-01-01T23:59:59.000Z

    residential 2009 IECC, commercial 2009 IECC, air sealing and blower doors; ? A resource library of compliance tools, software, and PNNL checklists. 15 CATEE-Dallas 11-09-2011 Questions? Felix Lopez, P.E. State Energy Conservation Office 512...

  5. Energy Efficiency Standards for State Buildings

    Broader source: Energy.gov [DOE]

    In April 2009, the legislature passed [http://data.opi.mt.gov/bills/2009/billhtml/SB0049.htm S.B. 49], creating energy efficiency standards for state-owned and state-leased buildings. Energy...

  6. State Appliance Standards (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01T23:59:59.000Z

    State appliance standards have existed for decades, starting with Californias enforcement of minimum efficiency requirements for refrigerators and several other products in 1979. In 1987, recognizing that different efficiency standards for the same products in different states could create problems for manufacturers, Congress enacted the National Appliance Energy Conservation Act (NAECA), which initially covered 12 products. The Energy Policy Act of 1992 (EPACT92), EPACT2005, and EISA2007 added additional residential and commercial products to the 12 products originally specified under NAECA.

  7. State Clean Energy Practices: Renewable Fuel Standards

    SciTech Connect (OSTI)

    Mosey, G.; Kreycik, C.

    2008-07-01T23:59:59.000Z

    The State Clean Energy Policies Analysis (SCEPA) project is supported by the Weatherization and Intergovernmental Program within the Department of Energy's Office of Energy Efficiency and Renewable Energy. This project seeks to quantify the impacts of existing state policies, and to identify crucial policy attributes and their potential applicability to other states. The goal is to assist states in determining which clean energy policies or policy portfolios will best accomplish their environmental, economic, and security goals. For example, renewable fuel standards (RFS) policies are a mechanism for developing a market for renewable fuels in the transportation sector. This flexible market-based policy, when properly executed, can correct for market failures and promote growth of the renewable fuels industry better than a more command-oriented approach. The policy attempts to correct market failures such as embedded fossil fuel infrastructure and culture, risk associated with developing renewable fuels, consumer information gaps, and lack of quantification of the non-economic costs and benefits of both renewable and fossil-based fuels. This report focuses on renewable fuel standards policies, which are being analyzed as part of this project.

  8. State Clean Energy Practices: Renewable Portfolio Standards

    SciTech Connect (OSTI)

    Hurlbut, D.

    2008-07-01T23:59:59.000Z

    The State Clean Energy Policies Analysis (SCEPA) project is supported by the Weatherization and Intergovernmental Program within the Department of Energy's Office of Energy Efficiency and Renewable Energy. This project seeks to quantify the impacts of existing state policies, and to identify crucial policy attributes and their potential applicability to other states. The goal is to assist states in determining which clean energy policies or policy portfolios will best accomplish their environmental, economic, and security goals. For example, a renewable portfolio standard (RPS) mandates an increase in the use of wind, solar, biomass, and other alternatives to fossil and nuclear electric generation. This paper provides a summary of the policy objectives that commonly drive the establishment of an RPS, the key issues that states have encountered in implementing an RPS, and the strategies that some of the leading states have followed to address implementation challenges. The factors that help an RPS function best generally have been explored in other analyses. This study complements others by comparing empirical outcomes, and identifying the policies that appear to have the greatest impact on results.

  9. SF State | Residential Life Community Living Standards Page 1 COMMUNITY LIVING STANDARDS

    E-Print Network [OSTI]

    SF State | Residential Life Community Living Standards Page 1 COMMUNITY LIVING STANDARDS A How-To Guide to Living in the SF State Residential Community 2014-2015 #12;SF State | Residential Life Community Philosophy Residential Life Staff Campus Resources One Stop Your Roommate Your Living Space

  10. High Performance Building Standards in New State Construction

    Broader source: Energy.gov [DOE]

    In January 2008, New Jersey enacted legislation mandating the use of high performance green building standards in new state construction. The standard requires that new buildings larger than 15...

  11. Energy-Efficient Building Standards for State Facilities

    Broader source: Energy.gov [DOE]

    Via Executive Order 27, Maine requires that construction or renovation of state buildings must incorporate "green building" standards that would achieve "significant" energy efficiency and...

  12. KENO V.a certification package

    SciTech Connect (OSTI)

    Niemer, K.A.

    1994-04-01T23:59:59.000Z

    KENO V.a has been certified. KENO V.a is a multigroup Monte Carlo criticality program used to calculate the k-effective of a 3-D system. It is part of the SCALE modular code system for performing Standardized Computer Analyses for Licensing Evaluation. SCALE was developed for the Nuclear Regulatory Commission to satisfy a need for a standardized method of analysis for the evaluation of nuclear fuel facility and package designs. In its present form, the system has the capability to perform criticality, shielding, and heat transfer analyses using well established functional modules tailored to the SCALE system. KENO V.a will be used at SRS to perform critical calculations related to nuclear criticality safety.

  13. Why Do States Adopt Renewable Portfolio Standards?: An Empirical Investigation

    E-Print Network [OSTI]

    Lyon, Thomas P.

    131 Why Do States Adopt Renewable Portfolio Standards?: An Empirical Investigation Thomas P. Lyon* and Haitao Yin** Renewable portfolio standards (RPSs) for electricity generation are politically popularU.S.stategovernments of Renewable Portfolio Standards (RPSs) as a policy tool for promoting renewable electricity generation. An RPS

  14. Green Building Standards for State Facilities

    Broader source: Energy.gov [DOE]

    Effective July 1, 2005, Act 1770 (the Arkansas Energy and Natural Resources Conservation Act), encourages all state agencies, including institutions of higher education, to use Leadership in Energy...

  15. Energy Conservation Standards for State Facilities

    Broader source: Energy.gov [DOE]

    In August 2004, Delaware’s governor signed House Bill 435, requiring state agencies to purchase ENERGY STAR qualified products if they are available competitively and within a reasonable time frame...

  16. Engineering VA Health Care

    E-Print Network [OSTI]

    Adams, Mark

    Engineering VA Health Care The Department of Veterans Affairs is offering a unique career to all regions of the country and toward numerous health care leadership roles. B.S. degree or M engineers to be effective Healthcare Technology Program Managers in the Veterans Health Administration

  17. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    CEC. 2006. 2005 Building energy efficiency standards forwidely used building energy efficiency standards, includingstrip mall. Building energy efficiency standards typically

  18. State Energy Efficiency Resource Standards: Design, Status, and Impacts

    SciTech Connect (OSTI)

    Steinberg, D.; Zinaman, O.

    2014-05-01T23:59:59.000Z

    An energy efficiency resource standard (EERS) is a policy that requires utilities or other entities to achieve a specified amount of energy savings through customer energy efficiency programs within a specified timeframe. EERSs may apply to electricity usage, natural gas usage, or both. This paper provides an overview of the key design features of EERSs for electricity, reviews the variation in design of EERSs across states, and provides an estimate of the amount of savings required by currently specified EERSs in each state. As of December, 2013, 23 states have active and binding EERSs for electricity. We estimate that state EERSs will require annual electricity savings of approximately 8-11% of total projected demand by 2020 in states with EERSs, however the level of savings targeted by the policies varies significantly across states. In addition to the variation in targeted savings, the design of EERSs varies significantly across states leading to differences in the suite of incentives created by the policy, the flexibility of compliance with the policy, the balance of benefits and costs of the policy between producers and consumers, and the certainty with which the policy will drive long-term savings.

  19. State trends in ecological risk assessment and standard setting

    SciTech Connect (OSTI)

    Siegel, M R; Fowler, K M; Bilyard, G R

    1993-02-01T23:59:59.000Z

    The purposes of this paper are (1) to identify key states' activities and plans related to setting cleanup standards using the ecological risk assessment process, and (2) to discuss the impacts these actions may have on the US Department of Energy's (DOE's) environmental restoration program. This report is prepared as part of a larger task, the purpose of which is to identify and assess state regulatory trends and legal developments that may impact DOE's environmental restoration program. Results of this task are intended to provide DOE with advance notice of potentially significant regulatory developments so as to enhance DOE's ability to influence these developments and to incorporate possible regulatory and policy changes into its planning process.

  20. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    Standard 90.2-2004: Energy-Efficient Design of Low-RiseStandard 90.2-2007: Energy-Efficient Design of Low-RiseStandard 90.2-2004: Energy-Efficient Design of Low-Rise

  1. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    90.1-1999: Energy Standard for Buildings Except Low- Rise90.1-2001: Energy Standard for Buildings Except Low- Rise90.1-2004: Energy Standard for Buildings Except Low- Rise

  2. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    90.1-1999: Energy Standard for Buildings Except Low-Rise90.1-2001: Energy Standard for Buildings Except Low-Rise90.1-2004: Energy Standard for Buildings Except Low-Rise

  3. Standardized Testing Program for Solid-State Hydrogen Storage Technologies

    SciTech Connect (OSTI)

    Miller, Michael A. [Southwest Research Institute; Page, Richard A. [Southwest Research Institute

    2012-07-30T23:59:59.000Z

    In the US and abroad, major research and development initiatives toward establishing a hydrogen-based transportation infrastructure have been undertaken, encompassing key technological challenges in hydrogen production and delivery, fuel cells, and hydrogen storage. However, the principal obstacle to the implementation of a safe, low-pressure hydrogen fueling system for fuel-cell powered vehicles remains storage under conditions of near-ambient temperature and moderate pressure. The choices for viable hydrogen storage systems at the present time are limited to compressed gas storage tanks, cryogenic liquid hydrogen storage tanks, chemical hydrogen storage, and hydrogen absorbed or adsorbed in a solid-state material (a.k.a. solid-state storage). Solid-state hydrogen storage may offer overriding benefits in terms of storage capacity, kinetics and, most importantly, safety.The fervor among the research community to develop novel storage materials had, in many instances, the unfortunate consequence of making erroneous, if not wild, claims on the reported storage capacities achievable in such materials, to the extent that the potential viability of emerging materials was difficult to assess. This problem led to a widespread need to establish a capability to accurately and independently assess the storage behavior of a wide array of different classes of solid-state storage materials, employing qualified methods, thus allowing development efforts to focus on those materials that showed the most promise. However, standard guidelines, dedicated facilities, or certification programs specifically aimed at testing and assessing the performance, safety, and life cycle of these emergent materials had not been established. To address the stated need, the Testing Laboratory for Solid-State Hydrogen Storage Technologies was commissioned as a national-level focal point for evaluating new materials emerging from the designated Materials Centers of Excellence (MCoE) according to established and qualified standards. Working with industry, academia, and the U.S. government, SwRI set out to develop an accepted set of evaluation standards and analytical methodologies. Critical measurements of hydrogen sorption properties in the Laboratory have been based on three analytical capabilities: 1) a high-pressure Sievert-type volumetric analyzer, modified to improve low-temperature isothermal analyses of physisorption materials and permit in situ mass spectroscopic analysis of the sample’s gas space; 2) a static, high-pressure thermogravimetric analyzer employing an advanced magnetic suspension electro-balance, glove-box containment, and capillary interface for in situ mass spectroscopic analysis of the sample’s gas space; and 3) a Laser-induced Thermal Desorption Mass Spectrometer (LTDMS) system for high thermal-resolution desorption and mechanistic analyses. The Laboratory has played an important role in down-selecting materials and systems that have emerged from the MCoEs.

  4. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    CEC. 2006. 2005 Building Energy Efficiency Standards foraddress cool roofs in building energy-efficiency standardsin its “Title 24” Building Energy Efficiency Standards for

  5. EMPLOYMENT SUMMARY Lexington, VA 24450

    E-Print Network [OSTI]

    Marsh, David

    EMPLOYMENT SUMMARY Lexington, VA 24450 Website : http://www.wlu.edu Phone : 540-458-8400 WASHINGTON AND LEE UNIVERSITY - 2011 Sydney Lewis Hall Total graduates 123 Unemployed - seeking 2 Employment status unknown 5 Unemployed - not seeking 0 Employed 111 97 14 Pursuing graduate degree FT 5 EMPLOYMENT STATUS

  6. Standards Development Australia & IEC (2003) Page 1 Current state of play with Australian and IEC standards for PV & RE Systems

    E-Print Network [OSTI]

    of Standards Australia EL42 Committee "Renewable Energy Power Supply Systems & Equipment" · Solar photovoltaic energy systems -- Terms and symbols - review of IEC 61836:1997 for possible adoption in AustraliaStandards Development Australia & IEC (2003) Page 1 Current state of play with Australian and IEC

  7. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    Standard 90.2-2004: Energy-Efficient Design of Low-RiseStandard 90.2-2007: Energy- Efficient Design of Low-Risebuilding design, permitting the use of less energy-efficient

  8. NoVaS Transformations: Flexible Inference for Volatility Forecasting

    E-Print Network [OSTI]

    Politis, Dimitris N; Thomakos, Dimitrios D

    2008-01-01T23:59:59.000Z

    NoVaS Transformations: Flexible Inference for VolatilityNoVaS Transformations: Flexible Inference for Volatility

  9. Using Mathematics Curriculum Based Measurement as an Indicator of Student Performance on State Standards

    E-Print Network [OSTI]

    Hall, Linda D.

    2010-07-14T23:59:59.000Z

    that reported to be aligned to national curriculum standards in order to predict student performance on state standards-based mathematics curriculum, identify students at-risk of failure, and plan instruction. Evidence was gathered on the System to Enhance...

  10. Status of cool roof standards in the United States

    SciTech Connect (OSTI)

    Akbari, Hashem; Levinson, Ronnen

    2007-06-01T23:59:59.000Z

    Since 1999, several widely used building energy efficiency standards, including ASHRAE 90.1, ASHRAE 90.2, the International Energy Conservation Code, and California's Title 24 have adopted cool roof credits or requirements. We review the technical development of cool roof provisions in the ASHRAE 90.1, ASHRAE 90.2, and California Title 24 standards, and discuss the treatment of cool roofs in other standards and energy-efficiency programs. The techniques used to develop the ASHRAE and Title 24 cool roof provisions can be used as models to address cool roofs in building energy standards worldwide.

  11. Impacts of Standard 90.1-2007 for Commercial Buildings at State Level

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Gowri, Krishnan

    2009-10-12T23:59:59.000Z

    This report examines the requirements of Standard 90.1-2007 on commercial buildings on a state-by-state basis with a separate, stand-alone chapter for each state. Standard 90.1-2007 is compared to the current state code for most states. This is the final version of the draft previously cleared and assigned ERICA # PNNL-18544, titled "Commercial Nationwide Report."

  12. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    for steep-sloped nonresidential roofs in Title 24. Online atof SSP90.1 for Reflective Roofs. ASHRAE Transactions, 104(pp. 984-995. Evolution of cool roof standards in the United

  13. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    Solar Energy Center; Howard Wiig, State of Hawaii; and Charles Eley, Architectural Energy Corporation for clarifying building codes.

  14. Orthogonality criterion for banishing hydrino states from standard quantum mechanics

    E-Print Network [OSTI]

    Antonio S. de Castro

    2007-04-30T23:59:59.000Z

    Orthogonality criterion is used to shown in a very simple and general way that anomalous bound-state solutions for the Coulomb potential (hydrino states) do not exist as bona fide solutions of the Schr\\"{o}dinger, Klein-Gordon and Dirac equations.

  15. Orthogonality criterion for banishing hydrino states from standard quantum mechanics

    E-Print Network [OSTI]

    de Castro, Antonio S

    2007-01-01T23:59:59.000Z

    Orthogonality criterion is used to shown in a very simple and general way that anomalous bound-state solutions for the Coulomb potential (hydrino states) do not exist as bona fide solutions of the Schr\\"{o}dinger, Klein-Gordon and Dirac equations.

  16. Evolution of cool-roof standards in the United States

    SciTech Connect (OSTI)

    Akbari, Hashem; Akbari, Hashem; Levinson, Ronnen

    2008-07-11T23:59:59.000Z

    Roofs that have high solar reflectance and high thermal emittance stay cool in the sun. A roof with lower thermal emittance but exceptionally high solar reflectance can also stay cool in the sun. Substituting a cool roof for a noncool roof decreases cooling-electricity use, cooling-power demand, and cooling-equipment capacity requirements, while slightly increasing heating-energy consumption. Cool roofs can also lower citywide ambient air temperature in summer, slowing ozone formation and increasing human comfort. Provisions for cool roofs in energy-efficiency standards can promote the building- and climate-appropriate use of cool roofing technologies. Cool-roof requirements are designed to reduce building energy use, while energy-neutral cool-roof credits permit the use of less energy-efficient components (e.g., larger windows) in a building that has energy-saving cool roofs. Both types of measures can reduce the life-cycle cost of a building (initial cost plus lifetime energy cost). Since 1999, several widely used building energy-efficiency standards, including ASHRAE 90.1, ASHRAE 90.2, the International Energy Conservation Code, and California's Title 24 have adopted cool-roof credits or requirements. This paper reviews the technical development of cool-roof provisions in the ASHRAE 90.1, ASHRAE 90.2, and California Title 24 standards, and discusses the treatment of cool roofs in other standards and energy-efficiency programs. The techniques used to develop the ASHRAE and Title 24 cool-roof provisions can be used as models to address cool roofs in building energy-efficiency standards worldwide.

  17. Examining new fuel economy standards for the United States.

    SciTech Connect (OSTI)

    Plotkin, S. E.; Energy Systems

    2007-01-01T23:59:59.000Z

    After decades of futile attempts to increase U.S. fuel economy standards for passenger cars, which have remained unchanged since enactment of the Corporate Average Fuel Economy (CAFE) Standards in Title V of the 1975 Energy Policy Conservation Act, it seems increasingly likely that new and tougher standards will be enacted in the near future - especially after the Senate's 21 June passage of energy efficiency bill H.R. 6. As this magazine went to press, the bill, which calls for a 40 percent increase in vehicle fuel economy by 2020 among other efficiency and alternative energy goals, was headed to the House of Representatives for more debate. Congress has seen proposals like this since the 1980s, but this is the first time that one of them has passed in the Senate. The Bush administration has also weighed in with a proposal to increase new vehicle fuel economy by 4 percent per year from 2011 to 2017, and the administrator of the National Highway Traffic Safety Administration (NHTSA) has asked Congress to grant the Secretary of Transportation the authority to restructure and increase CAFE standards for cars, a power denied by the original CAFE legislation. A confluence of events has led to this change of political climate, including: the failure of world oil production and refining capacity to keep pace with rapidly growing demand, especially from China and other emerging economies, which has led to the highest oil prices since the 1980s and growing fears that world production of conventional oil may be close to its peak and rapid decline; the escalating influence of oil resources on geopolitics as China seeks to guarantee its future access to supplies, enhanced revenues from the higher prices, which prop up authoritarian regimes in Iran, Venezuela, Russia, and elsewhere and allow them increasing freedom of action; the enhancement of the role of climate change in political decision making by new reports from the Intergovernmental Panel on Climate Change (IPCC), with much strengthened language about the probability and severity of climate change and man's influence on it, and a recent Supreme Court decision rejecting the Environmental Protection Agency's assertion that it has no authority to regulate greenhouse gas emissions. New fuel economy standards will represent an ambitious and expensive undertaking on the part of the automobile industry and the nation, and proposals for new standards deserve careful congressional and public scrutiny.

  18. Life Cycle Analysis and Energy Conservation Standards for State Buildings

    Broader source: Energy.gov [DOE]

    In 1995 Ohio passed legislation requiring that all state agencies perform life-cycle cost analyses prior to the construction of new buildings, and energy consumption analyses prior to new leases. ...

  19. Green Building and Energy Reduction Standards for State Agencies

    Broader source: Energy.gov [DOE]

    On January 5, 2005, Washington’s governor signed Executive Order 05-01, directing state agencies to adopt green building practices in the construction of all new buildings and in major (over 60%)...

  20. Status of state and local adoption of energy standards for new commercial buildings

    SciTech Connect (OSTI)

    Boulin, J.J. [USDOE, Washington, DC (United States); Conover, D.R. [Pacific Northwest Lab., Richland, WA (United States)

    1992-09-01T23:59:59.000Z

    This paper presents a summary of building energy standards adoption by state and major local governments and how the standards apply to new commercial buildings. Numerous public and private sector agencies and organizations develop energy standards and codes for commercial buildings. These documents serve, among others, state and local legislators and regulators who are interested in requiring their use to reduce the energy consumption of new commercial buildings. Through adoption or adaptation of these documents by state or local governments, minimum acceptable design and construction criteria for new commercial buildings are established in law. The energy standard or code adopted, or used as a basis for a state developed standard, may be any one of a number of documents. The authority of the state to regulate construction may apply throughout the entire state, only to a few types of buildings, or may be absent, in which case local government has regulatory authority. The means of adoption may be by legislation, regulation, municipal code, or other legal vehicle. At the present time there are widespread differences in the energy standards adopted by state and local government and the application of these standards to new commercial buildings.

  1. Energy Efficiency Standards for State Buildings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy Chinaof EnergyImpactOn July 2,and/or local financial incentivesState Government

  2. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Montana

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Montana.

  3. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Delaware

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Delaware.

  4. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of New Jersey

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of New Jersey.

  5. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Kentucky

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Kentucky.

  6. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Wisconsin

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Wisconsin.

  7. Cost Effectiveness of ASHRAE Standard 90.1-2010 for the State of Connecticut

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-29T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in teh State of Connecticut.

  8. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Utah

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Utah.

  9. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of North Carolina

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of North Carolina.

  10. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Virginia

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Virginia.

  11. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Iowa

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Iowa.

  12. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Rhode Island

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Rhode Island.

  13. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Arkansas

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-26T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Arkansas.

  14. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Colorado

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Colorado.

  15. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Massachusetts

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Massachusetts.

  16. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of South Carolina

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of South Carolina.

  17. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Texas

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Texas.

  18. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Nebraska

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-12-13T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Nebraska.

  19. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Georgia

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Georgia.

  20. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Alabama

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-29T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Alabama.

  1. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of New York

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of New York.

  2. Cost-Effectiveness of ASHRAE Standard 90.1-2010 for the State of Oklahoma

    SciTech Connect (OSTI)

    Hart, Philip R.; Rosenberg, Michael I.; Xie, YuLong; Zhang, Jian; Richman, Eric E.; Elliott, Douglas B.; Loper, Susan A.; Myer, Michael

    2013-11-01T23:59:59.000Z

    Moving to the ANSI/ASHRAE/IES Standard 90.1-2010 version from the Base Code (90.1-2007) is cost-effective for all building types and climate zones in the State of Oklahoma.

  3. Including Alternative Resources in State Renewable Portfolio Standards: Current Design and Implementation Experience

    SciTech Connect (OSTI)

    Heeter, J.; Bird, L.

    2012-11-01T23:59:59.000Z

    Currently, 29 states, the District of Columbia, and Puerto Rico have instituted a renewable portfolio standard (RPS). An RPS sets a minimum threshold for how much renewable energy must be generated in a given year. Each state policy is unique, varying in percentage targets, timetables, and eligible resources. This paper examines state experience with implementing renewable portfolio standards that include energy efficiency, thermal resources, and non-renewable energy and explores compliance experience, costs, and how states evaluate, measure, and verify energy efficiency and convert thermal energy. It aims to gain insights from the experience of states for possible federal clean energy policy as well as to share experience and lessons for state RPS implementation.

  4. The Development of Interconnection Standards in Six States In 2007-2008

    SciTech Connect (OSTI)

    Keyes, Jason B.

    2008-04-01T23:59:59.000Z

    This paper discusses the process of developing standards for the interconnection of photovoltaic systems and other generators under ten megawatts to the electric grid. State utility commission rulemakings in 2007-2008 in Florida, New Mexico, North Carolina, Maryland, Illinois and Utah provide the basis for analysis of what is and should be considered in the development of standards, and how the process can be improved. State interconnection standards vary substantially, and many utilities have discretion to establish additional or different requirements, creating literally hundreds of sets of rules. This lack of uniformity imposes a significant cost on project developers and installers to track and comply with applicable rules. As well, burdensome provisions and uncertain costs and timelines present formidable barriers to entry, which advocates have limited resources to challenge. For a better process, the author proposes: establishing federal standards as a baseline, involving solar advocates, and developing a utility cost-recovery mechanism.

  5. Common Core State English Language Arts Standards Lesson 1: What I Know About the Aurora

    E-Print Network [OSTI]

    Mojzsis, Stephen J.

    Common Core State English Language Arts Standards 2012-2013 Lesson 1: What I Know About the Aurora, speaking clearly at an understandable pace. Lesson 3: Aurora Comparisons Reading: Information Text RI.3 clearly. Lesson 4: Come See an Aurora Writing W.3.2, W.4.2, W.5.2. Write informative/explanatory texts

  6. The Revised Austin Energy Code and Comparisons with the Texas State Energy Standard

    E-Print Network [OSTI]

    Crow, G.

    For the past two years the City of Austin Energy Code has been under review using the State Energy Standard and ASHRAE 90.2P as models for the revised Austin Energy Code. The major changes to these documents are presented in this paper....

  7. Understanding and Informing the Policy Environment: State-Level Renewable Fuels Standards

    SciTech Connect (OSTI)

    Brown, E.; Cory, K.; Arent, D.

    2007-01-01T23:59:59.000Z

    Renewable fuels standard (RFS) policies are becoming a popular public policy mechanism for developing the market for renewable fuels in the transportation sector. During the past decade, U.S. states and several countries began implementing these more market-based (less command and control) policies to support increased biofuels production and use. This paper presents an overview of current and proposed U.S. state-level policies, as well as selected electric sector policies and international fuel standard policies. Current U.S. state-level renewable fuel policies list drivers including an improved economy and environment, as well as fuel self-sufficiency. Best practices and experience from an evaluation of renewable portfolio standards (RPS) in the United States and international RFS policies can inform U.S. state-level policy by illustrating the importance of policy flexibility, binding targets, effective cost caps, and tradable permits. Understanding and building on the experiences from these previous policies can improve the policy mechanism and further develop a market for renewable fuels to meet the goals of improved economy, environment, and fuel self-sufficiency.

  8. Survey of State-Level Cost and Benefit Estimates of Renewable Portfolio Standards

    SciTech Connect (OSTI)

    Heeter, J.; Barbose, G.; Bird, L.; Weaver, S.; Flores-Espino, F.; Kuskova-Burns, K.; Wiser, R.

    2014-05-01T23:59:59.000Z

    Most renewable portfolio standards (RPS) have five or more years of implementation experience, enabling an assessment of their costs and benefits. Understanding RPS costs and benefits is essential for policymakers evaluating existing RPS policies, assessing the need for modifications, and considering new policies. This study provides an overview of methods used to estimate RPS compliance costs and benefits, based on available data and estimates issued by utilities and regulators. Over the 2010-2012 period, average incremental RPS compliance costs in the United States were equivalent to 0.8% of retail electricity rates, although substantial variation exists around this average, both from year-to-year and across states. The methods used by utilities and regulators to estimate incremental compliance costs vary considerably from state to state and a number of states are currently engaged in processes to refine and standardize their approaches to RPS cost calculation. The report finds that state assessments of RPS benefits have most commonly attempted to quantitatively assess avoided emissions and human health benefits, economic development impacts, and wholesale electricity price savings. Compared to the summary of RPS costs, the summary of RPS benefits is more limited, as relatively few states have undertaken detailed benefits estimates, and then only for a few types of potential policy impacts. In some cases, the same impacts may be captured in the assessment of incremental costs. For these reasons, and because methodologies and level of rigor vary widely, direct comparisons between the estimates of benefits and costs are challenging.

  9. VA Energy Management Action Plan | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    VA Energy Management Action Plan VA Energy Management Action Plan Presentation covers the FUPWG Meeting, held on May 1-2, 2007 in Cape Canaveral, Florida. fupwgccdemers.pdf More...

  10. Stability in MaVaN Models

    E-Print Network [OSTI]

    Christopher Spitzer

    2006-06-26T23:59:59.000Z

    Mass-varying neutrino (MaVaN) models propose a source of dark energy in a new scalar field called the acceleron. Recent work has shown that nonrelativistic neutrino fields in these theories are unstable to inhomogeneous fluctuations, and form structures that no longer behave as dark energy. One might expect that in multiple-neutrino models, the lighter species could continue to act as a source for the acceleron, generating dark energy without the help of heavier species. This paper shows that by considering the evolution of the acceleron field for a large class of models, the result of any neutrino component becoming unstable is that all components become unstable within a short time on cosmological scales. An alternate model employing a second scalar field in a hybrid potential is shown to have stable MaVaN dark energy even in the presence of unstable heavier components.

  11. Search for the standard model Higgs boson in tau lepton pair final states

    E-Print Network [OSTI]

    D0 Collaboration

    2012-05-16T23:59:59.000Z

    We present a search for the standard model Higgs boson in final states with an electron or muon and a hadronically decaying tau lepton in association with zero, one, or two or more jets using data corresponding to an integrated luminosity of up to 7.3 fb^{-1} collected with the D0 detector at the Fermilab Tevatron collider. The analysis is sensitive to Higgs boson production via gluon gluon fusion, associated vector boson production, and vector boson fusion, and to Higgs boson decays to tau lepton pairs or W boson pairs. Observed (expected) limits are set on the ratio of 95% C.L. upper limits on the cross section times branching ratio, relative to those predicted by the Standard Model, of 14 (22) at a Higgs boson mass of 115 GeV and 7.7 (6.8) at 165 GeV.

  12. Search for the standard model Higgs boson in tau lepton final states

    SciTech Connect (OSTI)

    Abazov, Victor Mukhamedovich; et al.

    2012-08-01T23:59:59.000Z

    We present a search for the standard model Higgs boson in final states with an electron or muon and a hadronically decaying tau lepton in association with zero, one, or two or more jets using data corresponding to an integrated luminosity of up to 7.3 fb{sup -1} collected with the D0 detector at the Fermilab Tevatron collider. The analysis is sensitive to Higgs boson production via gluon gluon fusion, associated vector boson production, and vector boson fusion, and to Higgs boson decays to tau lepton pairs or W boson pairs. Observed (expected) limits are set on the ratio of 95% C.L. upper limits on the cross section times branching ratio, relative to those predicted by the Standard Model, of 14 (22) at a Higgs boson mass of 115 GeV and 7.7 (6.8) at 165 GeV.

  13. Search for the standard model and a fermiophobic Higgs boson in diphoton final states

    E-Print Network [OSTI]

    D0 Collaboration

    2011-07-22T23:59:59.000Z

    We present a search for the standard model Higgs boson and a fermiophobic Higgs boson in the diphoton final states based on 8.2 fb-1 of ppbar collisions collected with the D0 detector at the Fermilab Tevatron Collider. No excess of data above background predictions is observed and upper limits at the 95% C.L. on the cross section multiplied by the branching fraction are set which are the most restrictive to date. A fermiophobic Higgs boson with a mass below 112.9 GeV is excluded at the 95% C.L.

  14. High-quality polarization entanglement state preparation and manipulation in standard telecommunication channels

    E-Print Network [OSTI]

    F. Kaiser; A. Issautier; L. A. Ngah; O. Danila; H. Herrmann; W. Sohler; A. Martin; S. Tanzilli

    2012-07-16T23:59:59.000Z

    We report a novel and simple approach for generating near-perfect quality polarization entanglement in a fully guided-wave fashion. Both deterministic pair separation into two adjacent telecommunication channels and the paired photons' temporal walk-off compensation are achieved using standard fiber components. Two-photon interference experiments are performed, both for quantitatively demonstrating the relevance of our approach, and for manipulating the produced state between bosonic and fermionic symmetries. The compactness, versatility, and reliability of this configuration makes it a potential candidate for quantum communication applications.

  15. Supporting Solar Power in Renewables Portfolio Standards: Experience from the United States

    SciTech Connect (OSTI)

    Wiser, Ryan; Barbose, Galen; Holt, Edward

    2010-10-01T23:59:59.000Z

    Among the available options for encouraging the increased deployment of renewable electricity, renewables portfolio standards (RPS) have become increasingly popular. The RPS is a relatively new policy mechanism, however, and experience with its use is only beginning to emerge. One key concern that has been voiced is whether RPS policies will offer adequate support to a wide range of renewable energy technologies and applications or whether, alternatively, RPS programs will favor a small number of the currently least-cost forms of renewable energy. This report documents the design of and early experience with state-level RPS programs in the United States that have been specifically tailored to encourage a wider diversity of renewable energy technologies, and solar energy in particular. As shown here, state-level RPS programs specifically designed to support solar have already proven to be an important, albeit somewhat modest, driver for solar energy deployment, and those impacts are projected to continue to build in the coming years. State experience in supporting solar energy with RPS programs is mixed, however, and full compliance with existing requirements has not been achieved. The comparative experiences described herein highlight the opportunities and challenges of applying an RPS to specifically support solar energy, as well as the importance of policy design details to ensuring that program goals are achieved.

  16. Renewable Portfolio Standards in the United States - A Status Report with Data Through 2007

    SciTech Connect (OSTI)

    Wiser, Ryan; Wiser, Ryan; Barbose, Galen; Bird, Lori; Churchill, Susannah; Deyette, Jeff; Holt, Ed

    2008-04-09T23:59:59.000Z

    Renewables portfolio standards (RPS) have proliferated at the state level in the United States since the late 1990s. In combination with Federal tax incentives, state RPS requirements have emerged as one of the most important drivers of renewable energy capacity additions. The focus of most RPS activity in the U.S. has been within the states. Nonetheless, the U.S. House of Representatives and Senate have, at different times, each passed versions of a Federal RPS; a Federal RPS, however, has not yet been signed into law. The design of an RPS can and does vary, but at its heart an RPS simply requires retail electricity suppliers (also called load-serving entities, or LSEs) to procure a certain minimum quantity of eligible renewable energy. An RPS establishes numeric targets for renewable energy supply, applies those targets to retail electricity suppliers, and seeks to encourage competition among renewable developers to meet the targets in a least-cost fashion. RPS purchase obligations generally increase over time, and retail suppliers typically must demonstrate compliance on an annual basis. Mandatory RPS policies are backed by various types of compliance enforcement mechanisms, and many--but not all--such policies include the trading of renewable energy certificates (RECs). Renewables portfolio standards are a relatively recent addition to the renewable energy policy landscape, and these policies continue to evolve. Keeping up with the design, early experience, and projected impacts of these programs is a challenge. This report seeks to fill this need by providing basic, factual information on RPS policies in the United States. It focuses on state-level initiatives, though a later section briefly discusses Federal developments as well. The report does not cover municipal-level renewable energy goals, unless required by state law. Similarly, this report focuses on mandatory state RPS requirements, though it also touches on non-binding renewable energy goals, especially when those goals are developed by state law or regulation. This report is the first of what is envisioned to be an ongoing series; as such, it concentrates on key recent developments, while also providing basic information on historical RPS experience and design. The report begins with an overview of state RPS policies: where they have been developed, when, and with what design features. Though most RPS programs are still in their infancy, the report summarizes the early impacts of these policies on renewable energy development, and provides a forecast of possible future impacts. It then turns to the implications of the growing trend towards solar and/or distributed generation set-asides within state RPS programs. Next, the report highlights state RPS compliance levels, enforcement actions, and cost impacts, as well as key developments in REC markets. Finally, the report provides a brief overview of Federal RPS proposals.

  17. Bacteria and Surface Water Quality Standards Section 303(d) of the Clean Water Act requires that each state set

    E-Print Network [OSTI]

    bodies that support oyster harvesting, called oyster waters, have four clas- sifications which determineBacteria and Surface Water Quality Standards Section 303(d) of the Clean Water Act requires that each state set water quality standards to ensure all uses of a water body have the ap- propriate water

  18. Procedures and Standards for Residential Ventilation System Commissioning: An Annotated Bibliography

    E-Print Network [OSTI]

    Stratton, J. Chris

    2014-01-01T23:59:59.000Z

    Arlington, VA: Air- Conditioning, Heating, and RefrigerationRefrigerating, and Air Conditioning Engineers. Bowser, D.Technical Standards for the Air Conditioning and Heat Pump

  19. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New Jersey's interconnection standards apply statewide to all electric distribution utilities, but not to the small number of municipal utilities and electric cooperatives in the state. The rules,...

  20. Key Science Observations of AGNs with KaVA Array

    E-Print Network [OSTI]

    Kino, Motoki; Zhao, Guang-Yao; Sohn, Bong Won

    2015-01-01T23:59:59.000Z

    KaVA (KVN and VERA Array) is a new combined VLBI array with KVN (Korean VLBI Network) and VERA (VLBI Exploration of Radio Astrometry). First, we briefly review the imaging capabilities of KaVA array which actually achieves more than three times better dynamic range than that achieved by VERA alone. The KaVA images clearly show detailed structures of extended radio jets in AGNs. Next, we represent the key science program to be led by KaVA AGN sub working group. We will conduct the monitoring observations of Sgr A* and M87 because of the largeness of their central super-massive black hole angular sizes. The main science goals of the program are (i) testing magnetically-driven-jet paradigm by mapping velocity fields of the M87 jet, and (ii) obtaining tight constraints on physical properties of radio emitting region in Sgr A*.

  1. New York State Standards for BUILDING Leaders Candidates in university-based preparation programs who seek NYS certification as

    E-Print Network [OSTI]

    Suzuki, Masatsugu

    who seek NYS certification as School Building Leaders (SBL) must demonstrate the following nine1 New York State Standards for BUILDING Leaders Candidates in university-based preparation programs who seek NYS certification must also be able to demonstrate, upon program completion, the knowledge

  2. EMPLOYEE RIGHTSUNDER THE FAIR LABOR STANDARDS ACT THE UNITED STATES DEPARTMENT OF LABOR WAGE AND HOUR DIVISION

    E-Print Network [OSTI]

    Subramanian, Venkat

    EMPLOYEE RIGHTSUNDER THE FAIR LABOR STANDARDS ACT THE UNITED STATES DEPARTMENT OF LABOR WAGE AND HOUR DIVISION FEDERAL MINIMUM WAGE At least 1 times your regular rate of pay for all hours worked over be assessed for each child labor violation that causes the death or serious injury of any minor employee

  3. Costs and Benefits of Renewables Portfolio Standards in the United States

    E-Print Network [OSTI]

    Barbose, Galen

    2014-01-01T23:59:59.000Z

    Approval of Its Amended Renewable Energy Plan. June 3, 2013.Benefits of Complying with Renewable Portfolio Standards:The Costs and Benefits of Renewable Resource Procurement in

  4. Renewable Portfolio Standards in the United States - A Status Report with Data Through 2007

    E-Print Network [OSTI]

    Wiser, Ryan

    2008-01-01T23:59:59.000Z

    Federal tax incentives, state renewable energy funds,incentives, state RPS requirements have emerged as one of the most important drivers of renewable energy

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    NOTE: In Feb 2014, the PUC proposed changes to the State’s Alternative Energy Portfolio Standard, Interconnection, and Net-metering rules. The documents associated with the case can be accessed at...

  6. Regulations Establishing Water Quality Standards for Surface Water of the State of Arkansas (Arkansas)

    Broader source: Energy.gov [DOE]

    The Regulations Establishing Water Quality Standards are established pursuant to the provisions of Subchapter 2 of the Arkansas Water and Air Pollution Control Act (Act 472 of the Acts of Arkansas...

  7. Supporting Solar Power in Renewables Portfolio Standards: Experience from the United States

    E-Print Network [OSTI]

    Wiser, Ryan

    2010-01-01T23:59:59.000Z

    solar systems to be estimated using the “PVWatts” software developed by the National Renewable Energy Laboratory, if permitted by state regulations.

  8. Health impact assessment in the United States: Has practice followed standards?

    SciTech Connect (OSTI)

    Schuchter, Joseph, E-mail: jws@berkeley.edu [University of California, Berkeley, School of Public Health, Department of Environmental Health Sciences, 50 University Hall, Berkeley, CA 94720-7360 (United States); Bhatia, Rajiv [University of California, Berkeley, Institute of Urban and Regional Development (United States); Corburn, Jason [University of California, Berkeley, College of Environmental Design, Department of City and Regional Planning (United States); Seto, Edmund [University of Washington, School of Public Health, Department of Environmental and Occupational Health (United States)

    2014-07-01T23:59:59.000Z

    As an emerging practice, Health Impact Assessment is heterogeneous in purpose, form, and scope and applied in a wide range of decision contexts. This heterogeneity challenges efforts to evaluate the quality and impact of practice. We examined whether information in completed HIA reports reflected objectively-evaluable criteria proposed by the North American HIA Practice Standards Working Group in 2009. From publically-available reports of HIAs conducted in the U.S. and published from 2009 to 2011, we excluded those that were components of, or comment letters on, Environmental Impact Assessments (5) or were demonstration projects or student exercises (8). For the remaining 23 reports, we used practice standards as a template to abstract data on the steps of HIA, including details on the rationale, authorship, funding, decision and decision-makers, participation, pathways and methods, quality of evidence, and recommendations. Most reports described screening, scoping, and assessment processes, but there was substantial variation in the extent of these processes and the degree of stakeholder participation. Community stakeholders participated in screening or scoping in just two-thirds of the HIAs (16). On average, these HIAs analyzed 5.5 determinants related to 10.6 health impacts. Most HIA reports did not include evaluation or monitoring plans. This study identifies issues for field development and improvement. The standards might be adapted to better account for variability in resources, produce fit-for-purpose HIAs, and facilitate innovation guided by the principles. - Highlights: • Our study examined reported HIAs in the U.S. against published practice standards. • Most HIAs used some screening, scoping and assessment elements from the standards. • The extent of these processes and stakeholder participation varied widely. • The average HIA considered multiple health determinants and impacts. • Evaluation or monitoring plans were generally not included in reports.

  9. Heisenberg versus standard scaling in quantum metrology with Markov generated states and monitored environment

    E-Print Network [OSTI]

    Catalin Catana; Madalin Guta

    2014-07-04T23:59:59.000Z

    Finding optimal and noise robust probe states is a key problem in quantum metrology. In this paper we propose Markov dynamics as a possible mechanism for generating such states, and show how the Heisenberg scaling emerges for systems with multiple `dynamical phases' (stationary states), and noiseless channels. We model noisy channels by coupling the Markov output to `environment' ancillas, and consider the scenario where the environment is monitored to increase the quantum Fisher information of the output. In this setup we find that the survival of the Heisenberg limit depends on whether the environment receives `which phase' information about the memory system.

  10. Comparing state portfolio standards and system-benefits charges under restructuring

    E-Print Network [OSTI]

    Wiser, Ryan; Porter, Kevin; Bolinger, Mark

    2000-01-01T23:59:59.000Z

    wind, fuel cells, and landfill gas. Fund collection began inbuildings. Has also funded a landfill gas project, and a fewwater, or other in-state landfill gas, wind and biomass. R&D

  11. The Treatment of Renewable Energy Certificates, EmissionsAllowances, and Green Power Programs in State Renewables PortfolioStandards

    SciTech Connect (OSTI)

    Holt, Edward A.; Wiser, Ryan H.

    2007-04-17T23:59:59.000Z

    Twenty-one states and the District of Columbia have adopted mandatory renewables portfolio standards (RPS) over the last ten years. Renewable energy attributes-such as the energy source, conversion technology, plant location and vintage, and emissions-are usually required to verify compliance with these policies, sometimes through attributes bundled with electricity, and sometimes with the attributes unbundled from electricity and traded separately as renewable energy certificates (RECs). This report summarizes the treatment of renewable energy attributes in state RPS rules. Its purpose is to provide a source of information for states considering RPS policies, and also to draw attention to certain policy issues that arise when renewable attributes and RECs are used for RPS compliance. Three specific issues are addressed: (1) the degree to which unbundled RECs are allowed under existing state RPS programs and the status of systems to track RECs and renewable energy attributes; (2) definitions of the renewable energy attributes that must be included in order to meet state RPS obligations, including the treatment of available emissions allowances; and (3) state policies on whether renewable energy or RECs sold through voluntary green power transactions may count towards RPS obligations.

  12. Health and Wellness @ U.Va. Department of Student Health

    E-Print Network [OSTI]

    Acton, Scott

    Health and Wellness @ U.Va. Department of Student Health Counseling and Psychological Services "Without health there is no happiness. An attention to health, then, should take the place of every other on Accreditation of Healthcare Organizations 2013 Parents Handbook p. 36-41 #12;Student Health Services · 12:30am-2

  13. EMPLOYMENT SUMMARY FOR 2011 GRADUATES Lexington, VA 24450

    E-Print Network [OSTI]

    Marsh, David

    EMPLOYMENT SUMMARY FOR 2011 GRADUATES Lexington, VA 24450 Website : http://www.wlu.edu Phone : 540 Total graduates 129 Unemployed - Not Seeking 1 Employment Status Unknown 3 Unemployed - Seeking 7 Employed - Undeterminable * 0 0 0 0 0 Employed - Bar Passage Required 71 6 2 2 81 Pursuing Graduate Degree

  14. Contract Connections @ ChallengeHER, Norfolk VA, October 14

    Broader source: Energy.gov [DOE]

    The U.S. Small Business Administration (SBA), Women Impacting Public Policy (WIPP), and American Express OPEN have partnered to host this special FREE contracting event for women business owners. American Express OPEN will hold a Contract Connections session at the ChallengeHER – Norfolk Event, on October 14th, 2014 at the Webb University Center, Norfolk, VA.

  15. absorption va vibrational: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absorption va vibrational First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 LE JOURNAL DE .PHYSIQUE...

  16. Quantum resistance standard accuracy close to the zero-dissipation state

    SciTech Connect (OSTI)

    Schopfer, F.; Poirier, W. [Laboratoire National de métrologie et d'Essais (LNE), 29 avenue Roger Hennequin, 78197 Trappes (France)] [Laboratoire National de métrologie et d'Essais (LNE), 29 avenue Roger Hennequin, 78197 Trappes (France)

    2013-08-14T23:59:59.000Z

    We report on a comparison of four GaAs/AlGaAs-based quantum resistance standards using an original technique adapted from the well-known Wheatstone bridge. This work shows that the quantized Hall resistance at Landau level filling factor ?=2 can be reproducible with a relative uncertainty of 32×10{sup ?12} in the dissipationless limit of the quantum Hall effect regime. In the presence of a very small dissipation characterized by a mean macroscopic longitudinal resistivity R{sub xx}(B) of a few ??, the discrepancy ?R{sub H}(B) between quantum Hall resistors measured on the Hall plateau at magnetic induction B turns out to follow the so-called resistivity rule R{sub xx}(B)=?B×d(?R{sub H}(B))/dB. While the dissipation increases with the measurement current value, the coefficient ? stays constant in the range investigated (40?120 ?A). This result enlightens the impact of the dissipation emergence in the two-dimensional electron gas on the Hall resistance quantization, which is of major interest for the resistance metrology. The quantum Hall effect is used to realize a universal resistance standard only linked to the electron charge e and the Planck constant h and it is known to play a central role in the upcoming revised Système International of units. There are therefore fundamental and practical benefits in testing the reproducibility property of the quantum Hall effect with better and better accuracy.

  17. Weighing the Costs and Benefits of Renewables Portfolio Standards:A Comparative Analysis of State-Level Policy Impact Projections

    SciTech Connect (OSTI)

    Chen, Cliff; Wiser, Ryan; Bolinger, Mark

    2007-01-16T23:59:59.000Z

    State renewables portfolio standards (RPS) have emerged as one of the most important policy drivers of renewable energy capacity expansion in the U.S. Collectively, these policies now apply to roughly 40% of U.S. electricity load, and may have substantial impacts on electricity markets, ratepayers, and local economies. As RPS policies have been proposed or adopted in an increasing number of states, a growing number of studies have attempted to quantify the potential impacts of these policies, focusing primarily on projecting cost impacts, but sometimes also estimating macroeconomic and environmental effects. This report synthesizes and analyzes the results and methodologies of 28 distinct state or utility-level RPS cost impact analyses completed since 1998. Together, these studies model proposed or adopted RPS policies in 18 different states. We highlight the key findings of these studies on the costs and benefits of RPS policies, examine the sensitivity of projected costs to model assumptions, assess the attributes of different modeling approaches, and suggest possible areas of improvement for future RPS analysis.

  18. Search for the Standard Model Higgs boson in final states with $b$ quarks at the Tevatron

    SciTech Connect (OSTI)

    Potamianos, Karolos

    2011-11-01T23:59:59.000Z

    We present the result of searches for a low mass Standard Model Higgs boson produced in association with a W or a Z boson at a center-of-mass energy of {radical}s = 1.96 TeV with the CDF and D0 detectors at the Fermilab Tevatron collider. The search is performed in events containing one or two b tagged jets in association with either two leptons, or one lepton and an imbalance in transverse energy, or simply a large imbalance in transverse energy. Datasets corresponding to up to 8.5 fb{sup -1} of integrated luminosity are considered in the analyses. These are the most powerful channels in the search for a low mass Higgs boson at the Tevatron. Recent sensitivity improvements are discussed. For a Higgs mass of 115 GeV/c{sup 2}, the expected sensitivity for the most sensitive individual analyses reaches 2.3 times the SM prediction at 95% confidence level (C.L.), with all limits below 5 times the SM. Additionally, a WZ/ZZ cross-section measurement is performed to validate the analysis techniques deployed for searching for the Higgs.

  19. Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    In 2007, Minnesota legislation modified the state's existing non-mandated renewable energy objective, creating a mandatory renewable portfolio standard (RPS) called the Renewable Energy Standard ...

  20. Combining a New Vehicle Fuel Economy Standard with a Cap-and-Trade Policy: Energy and Economic Impact in the United States

    E-Print Network [OSTI]

    Karplus, V.J.

    The United States has adopted fuel economy standards that require increases in the on-road efficiency of new passenger vehicles, with the goal of reducing petroleum use, as well as (more recently) greenhouse gas (GHG) ...

  1. Environmental Literacy and Sustainability Values: A Content Analysis of National EE Frameworks and State Standards through the Lens of the Earth Charter

    E-Print Network [OSTI]

    Singleton, Julie

    2012-02-14T23:59:59.000Z

    of the findings from these three methods showed that state standards and national guidelines adequately address ecological integrity principles, but not environmental justice principles associated with flourishing, sustainable communities. The North American...

  2. Summary of Zablocki VA Instructions For TTC Student 2014 See attached points in order to complete information for the VA. These items are available under the "VA Info 2014"

    E-Print Network [OSTI]

    ) Class: Scheduled by the VA Review the CPRS power point in TTC course before taking the class (See TTC.S. Citizens see Appendix D] 7. Security Check / Fingerprinting before August 10, 2014 All medical students://helpdesk.r02.med.va.gov/CAisd/pdmweb.exe 10. Complete the annual on-line mandatory training course: VHA

  3. VA's Performance Contracting Program Overview | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: SinceDevelopment | Department of EnergyEnergy 94:Vulnerabilities |UsersUsers Gain RootVA's

  4. Weighing the Costs and Benefits of Renewables Portfolio Standards: A Comparative Analysis of State-Level Policy Impact Projections

    E-Print Network [OSTI]

    Chen, Cliff; Wiser, Ryan; Bolinger, Mark

    2007-01-01T23:59:59.000Z

    State Energy Research and Development Authority and New Yorkof Public Service, New York State Energy Research andof Public Service, New York State Energy Research and

  5. Search for the Standard Model Higgs Boson in the Lepton + Missing Transverse Energy + Jets Final State in ATLAS

    E-Print Network [OSTI]

    Mark S. Neubauer; for the ATLAS Collaboration

    2011-10-11T23:59:59.000Z

    A search for the Standard Model Higgs boson has been performed in the H \\rightarrow WW \\rightarrow l{\

  6. Standard Compliance: Guidelines to Help State and Alternative Fuel Provider Fleets Meet Their Energy Policy Act Requirements, 10 CFR Part 490 (Book)

    SciTech Connect (OSTI)

    Not Available

    2012-04-01T23:59:59.000Z

    This guidebook addresses the primary requirements of the Alternative Fuel Transportation Program to help state and alternative fuel provider fleets comply with the Energy Policy Act via the Standard Compliance option. It also addresses the topics that covered fleets ask about most frequently.

  7. Standard Compliance: Guidelines to Help State and Alternative Fuel Provider Fleets Meet Their Energy Policy Act Requirements, 10 CFR Part 490 (Book)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01T23:59:59.000Z

    This guidebook addresses the primary requirements of the Alternative Fuel Transportation Program to help state and alternative fuel provider fleets comply with the Energy Policy Act via the Standard Compliance option. It also addresses the topics that covered fleets ask about most frequently.

  8. Unified Convolutional/Turbo Decoder Architecture Design Based on Triple-Mode MAP/VA Kernel

    E-Print Network [OSTI]

    Hung, Shih-Hao

    Unified Convolutional/Turbo Decoder Architecture Design Based on Triple-Mode MAP/VA Kernel Fan convolutional/ turbo decoder design. According to the triple-mode MAP/VA timing chart and by merging some similar modules in both the Viterbi decoder and the log-MAP turbo code decoder, we build one unified

  9. Got Standards? "Got Standards?"

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    certifications available. Some of these certifications include ISO 9002 1994, ISO 9003 1994 and ISO 9001 in order to bring harmony to global standards for international trade. Enter ISO 9000. The Basics In order to fully understand the concept of ISO 9000, it is very important to have a good idea of what a standard is

  10. The Economic, Energy, and GHG Emissions Impacts of Proposed 2017–2025 Vehicle Fuel Economy Standards in the United States

    E-Print Network [OSTI]

    Karplus, Valerie

    2012-07-31T23:59:59.000Z

    Increases in the U.S. Corporate Average Fuel Economy (CAFE) Standards for 2017 to 2025 model year light-duty vehicles are currently under consideration. This analysis uses an economy-wide model with detail in the passenger ...

  11. Water Quality Standards Implementation (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Oklahoma Department of Environmental Quality regulates Oklahoma's Water Quality Standards. The law states the requirements and standards for point source discharges. It also establishes...

  12. ORISE: Standards development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of industry standards that provide guidance and support to decontamination and decommissioning projects across the United States. Because of our extensive experience...

  13. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    Rhode Island's Renewable Energy Standard (RES), established in June 2004, requires the state's retail electricity providers -- including non-regulated power producers and distribution companies --...

  14. Energy Conservation Standards Activities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the...

  15. asparagine motale-e va: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NWR PR National Marine; Fisheries Service; Cape Romain; Wilderness W Sc 2007-01-01 220 Millard W. Hall, Director VA1ume i, ilumber Environmental Sciences and Ecology Websites...

  16. If you reside in WASHINGTON, DC - MD -VA - WV your salary will...

    National Nuclear Security Administration (NNSA)

    If you are employed in the WASHINGTON, DC Metropolitan Area (D.C., Baltimore, Northern VA, Eastern WV, and Southern PA) your salary will range from: Pay Band Pay Plan(s) Minimum...

  17. VaR Constrained Hedging of Fixed Price Load-Following Obligations in Competitive

    E-Print Network [OSTI]

    VaR Constrained Hedging of Fixed Price Load-Following Obligations in Competitive Electricity. In either case the entity holding the load following obligation is exposed to the load variation

  18. The Treatment of Renewable Energy Certificates, Emissions Allowances, and Green Power Programs in State Renewables Portfolio Standards

    E-Print Network [OSTI]

    Holt, Edward A.; Wiser, Ryan H.

    2007-01-01T23:59:59.000Z

    systems (NEPOOL GIS and PJM-EIS GATS) and three stateCurrently Used manual manual manual NEPOOL GIS PJM-EIS GATSPJM-EIS GATS manual manual NEPOOL GIS PJM-EIS GATS NEPOOL

  19. Overview of Development and Deployment of Codes, Standards and Regulations Affecting Energy Storage System Safety in the United States

    SciTech Connect (OSTI)

    Conover, David R.

    2014-08-22T23:59:59.000Z

    This report acquaints stakeholders and interested parties involved in the development and/or deployment of energy storage systems (ESS) with the subject of safety-related codes, standards and regulations (CSRs). It is hoped that users of this document gain a more in depth and uniform understanding of safety-related CSR development and deployment that can foster improved communications among all ESS stakeholders and the collaboration needed to realize more timely acceptance and approval of safe ESS technology through appropriate CSR.

  20. Search for a non-standard-model Higgs boson decaying to a pair of new light bosons in four-muon final states

    SciTech Connect (OSTI)

    Chatrchyan, Serguei; et al.

    2013-11-01T23:59:59.000Z

    Results are reported from a search for non-standard-model Higgs boson decays to pairs of new light bosons, each of which decays into the ?+?? final state. The new bosons may be produced either promptly or via a decay chain. The data set corresponds to an integrated luminosity of 5.3 fb?1 of proton–proton collisions at View the MathML source, recorded by the CMS experiment at the LHC in 2011. Such Higgs boson decays are predicted in several scenarios of new physics, including supersymmetric models with extended Higgs sectors or hidden valleys. Thus, the results of the search are relevant for establishing whether the new particle observed in Higgs boson searches at the LHC has the properties expected for a standard model Higgs boson. No excess of events is observed with respect to the yields expected from standard model processes. A model-independent upper limit of 0.86±0.06 fb on the product of the cross section times branching fraction times acceptance is obtained. The results, which are applicable to a broad spectrum of new physics scenarios, are compared with the predictions of two benchmark models as functions of a Higgs boson mass larger than 86 GeV/c2 and of a new light boson mass within the range 0.25–3.55 GeV/c2

  1. Improving Memory Subsystem Performance Using ViVA: Virtual Vector Architecture

    SciTech Connect (OSTI)

    Gebis, Joseph; Oliker, Leonid; Shalf, John; Williams, Samuel; Yelick, Katherine

    2009-01-12T23:59:59.000Z

    The disparity between microprocessor clock frequencies and memory latency is a primary reason why many demanding applications run well below peak achievable performance. Software controlled scratchpad memories, such as the Cell local store, attempt to ameliorate this discrepancy by enabling precise control over memory movement; however, scratchpad technology confronts the programmer and compiler with an unfamiliar and difficult programming model. In this work, we present the Virtual Vector Architecture (ViVA), which combines the memory semantics of vector computers with a software-controlled scratchpad memory in order to provide a more effective and practical approach to latency hiding. ViVA requires minimal changes to the core design and could thus be easily integrated with conventional processor cores. To validate our approach, we implemented ViVA on the Mambo cycle-accurate full system simulator, which was carefully calibrated to match the performance on our underlying PowerPC Apple G5 architecture. Results show that ViVA is able to deliver significant performance benefits over scalar techniques for a variety of memory access patterns as well as two important memory-bound compact kernels, corner turn and sparse matrix-vector multiplication -- achieving 2x-13x improvement compared the scalar version. Overall, our preliminary ViVA exploration points to a promising approach for improving application performance on leading microprocessors with minimal design and complexity costs, in a power efficient manner.

  2. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New York first adopted uniform interconnection standards in 1999 (see history below). The Standard Interconnection Requirements (SIR) have subsequently been amended several times since, most...

  3. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The North Carolina Utilities Commission (NCUC) adopted comprehensive interconnection standards for distributed generation in June 2008. The NCUC standards, which are similar to the Federal Energy...

  4. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Michigan Public Service Commission (PSC) first adopted interconnection standards for distributed generation (DG) in September 2003. The original standards provided for 5 levels of...

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Pennsylvania Public Utilities Commission was required to adopt interconnection standards and net-metering rules by the Alternative Energy Portfolio Standards Act of 2004.The PUC subsequently...

  6. Proceedings of the RESOLVE Workshop 2006 Blacksburg, VA

    E-Print Network [OSTI]

    Edwards, Stephen H.

    #12;ii #12;iii Preface and Grade Resolve/C++ Programs ....................................6 Stephen H. Edwards, Virginia Tech Some Joan Krone, Denison University, and William F. Ogden, The Ohio State University Issues in the Creation

  7. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Tier 1 systems must include an inverter certified to meet the Underwriters Laboratories (UL) 1741 standard

  8. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    With the passage of [http://www.secstate.wa.gov/elections/initiatives/text/I937.pdf Initiative 937] in 2006, Washington became the second state after Colorado to pass a renewable energy standard by...

  9. Surface Water Quality Standards

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    recreational uses. ?The Commission will seek substantial additional public comment on any proposed changes to the standards before adopting them into the state admin- istrative code,? Davenport said. ?Because of the com- plexity and regulatory importance... Conservation Board?s state watershed coordinator, said the standards for contact recreation, with only a few exceptions, are uniformly applied regardless of water body type or the actual level of recreation use. ?Because a minimum of 10 water samples over a...

  10. NASA/TM-1998-208427 A Note About HARPs State Trimming

    E-Print Network [OSTI]

    Butler, Ricky W.

    Center for AeroSpace Information 7121 Standard Drive Hanover, MD 21076-1320 #12;National Aeronautics Hanover, MD 21076-1320 Springfield, VA 22161-2171 (301) 621-0390 (703) 487-4650 #12;Contents 1

  11. Search for the Standard Model Higgs Boson at D$\\O$ in the Final State with Two $\\tau$'s and Two Jets

    SciTech Connect (OSTI)

    Tschann-Grimm, Kathryn; /SUNY, Stony Brook

    2011-08-01T23:59:59.000Z

    The Standard Model (SM) is a very successful description of particle physics, and its predictions have stood up to a multitude of precision experimental tests. But one of the central elements of the SM, the Higgs mechanism, has yet to be verified. The Higgs mechanism (and the associated Higgs Boson) generates electroweak symmetry breaking and consequently allows for W and Z bosons and fermions to be massive. This thesis presents a search for the SM Higgs boson at the D0 experiment using the Tevatron particle accelerator at Fermilab in the final state {tau}{tau} + jet jet with 4.3 fb{sup -1} of data. This final state is sensitive to the Higgs production mechanisms gluon-gluon fusion and vector-boson fusion, and to the Higgs produced in association with a W or Z, for Higgs masses from 100 to 200 GeV. We see no evidence for the Higgs boson, but by itself our search does not rule out the SM Higgs. When this analysis is combined with other searches at the Tevatron the Higgs can be ruled out at a 95% confidence level for the mass range from 156 to 177 GeV.

  12. MED-VaL 10, Manufacturing Science and Engineering --1999 Modeling of Gear Bobbing

    E-Print Network [OSTI]

    Aristomenis, Antoniadis

    Shifting, Optimization, Coatings I INTRODUCTION The lack o f a universal wear prediction method for gearMED-VaL 10, Manufacturing Science and Engineering -- 1999 ASME 1999 Modeling of Gear Bobbing Part models for gear hobbing were presented in the first pan of this paper. To determine the constants

  13. PRECISION MEASUREMENT OF SINGLET P CAPTURE IN HYDROGEN V.A. Andreev1

    E-Print Network [OSTI]

    Kammel, Peter

    PRECISION MEASUREMENT OF SINGLET µP CAPTURE IN HYDROGEN V.A. Andreev1 , T.I. Banks3 , B as a measurement of the deuterium depletion in the hydrogen gas. However, due to the reappearance of a hotspot-mounted readout electronics for cathodes and anodes. About 1500 new channels connected to new compressor modules

  14. Progress on development of the new FDIRC PID detector J. Va'vrak,

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Progress on development of the new FDIRC PID detector J. Va'vrak, , N. Arnaudf , A. Yu. Barnyakove of PID detector called FDIRC, intended to be used at the SuperB experiment, which requires /K separation the DIRC PID detector (DIRC = Detector of Internally Reflected Cherenkov light) [1]. The original DIRC had

  15. February 2006, NRAO, VA (or why H0 is the Dark Energy)

    E-Print Network [OSTI]

    Hu, Wayne

    Wayne Hu February 2006, NRAO, VA (or why H0 is the Dark Energy) Dark Energy in Light of the CMB #12;If its not dark, it doesn't matter! · Cosmic matter-energy budget: Dark Energy Dark Matter Dark provide the high redshift cornerstone to cosmological inferences on the dark matter and dark energy WMAP

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    West Virginia's interconnection standards include two levels of review. The qualifications and application fees for each level are as follows:...

  17. Enforcement Policy Statement: Regional Standards Enforcement...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    42 U.S.C. 6291-6309, which set forth amended energy conservation standards for central air conditioners and heat pumps, including regional standards in certain States....

  18. Chapter 28 Substantive State Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    fishing and hunting opportunities of all citizens." In 2003, WDFW and a broad range of wind power stakeholders developed the WDFW Wind Power Guidelines (WDFW 2009a) to provide...

  19. Chapter 28 Substantive State Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041clothAdvanced Materials Advanced. C o w l i t z C oCNMSStaffCeriumfor the 20122-19-13-16-18-1

  20. Ambient Air Quality Standards (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations set statewide ambient air quality standards for various contaminants. The state code follows the regulations set forth in the National Primary and Secondary Ambient Air Quality...

  1. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The interconnection standards approved by the PUC also updated Nevada's net-metering policy, originally enacted in 1997. Previously, Nevada Revised Statute 704.774 addressed basic interconnection...

  2. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Virginia has two interconnection standards: one for net-metered systems and one for systems that are not net-metered.

  3. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In December 2005, the Colorado Public Utilities Commission (PUC) adopted standards for net metering and interconnection, as required by Amendment 37, a renewable-energy ballot initiative approved...

  4. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In September 2007, the Washington Utilities and Transportation Commission (UTC) adopted interconnection standards for distributed generation (DG) systems up to 20 megawatts (MW) in capacity. The...

  5. An Inclusive Search for the Higgs Boson in the Four Lepton Final State The Higgs boson is the last undiscovered particle of the Standard Model of Particle Physics (SM).

    E-Print Network [OSTI]

    Fermilab

    An Inclusive Search for the Higgs Boson in the Four Lepton Final State The Higgs boson is the last undiscovered particle of the Standard Model of Particle Physics (SM). A search for SM Higgs boson decays transverse energy. Our search is optimized for Higgs boson decays to Z-boson pairs but is sensitive, due

  6. American Statistical Association Names Fellows for 2010 ALEXANDRIA VA (PRWEB) MAY 20, 2010 The American Statistical Association (ASA), the

    E-Print Network [OSTI]

    Ponce, V. Miguel

    American Statistical Association Names Fellows for 2010 ALEXANDRIA VA (PRWEB) MAY 20, 2010 ­ The American Statistical Association (ASA), the nation's preeminent professional statistical society, today the American Statistical Association The American Statistical Association (ASA), a scientific and educational

  7. Walk the Line: The Development of Route Selection Standards for Spent Nuclear Fuel and High-level Radioactive Waste in the United States - 13519

    SciTech Connect (OSTI)

    Dilger, Fred [Black Mountain Research, Henderson, NV 81012 (United States)] [Black Mountain Research, Henderson, NV 81012 (United States); Halstead, Robert J. [State of Nevada Agency for Nuclear Projects, Carson City, NV 80906 (United States)] [State of Nevada Agency for Nuclear Projects, Carson City, NV 80906 (United States); Ballard, James D. [Department of Sociology, California State University, Northridge, CA 91330 (United States)] [Department of Sociology, California State University, Northridge, CA 91330 (United States)

    2013-07-01T23:59:59.000Z

    Although storage facilities for spent nuclear fuel (SNF) and high-level radioactive waste (HLRW) are widely dispersed throughout the United States, these materials are also relatively concentrated in terms of geographic area. That is, the impacts of storage occur in a very small geographic space. Once shipments begin to a national repository or centralized interim storage facility, the impacts of SNF and HLRW will become more geographically distributed, more publicly visible, and almost certainly more contentious. The selection of shipping routes will likely be a major source of controversy. This paper describes the development of procedures, regulations, and standards for the selection of routes used to ship spent nuclear fuel and high-level radioactive waste in the United States. The paper begins by reviewing the circumstances around the development of HM-164 routing guidelines. The paper discusses the significance of New York City versus the Department of Transportation and application of HM-164. The paper describes the methods used to implement those regulations. The paper will also describe the current HM-164 designated routes and will provide a summary data analysis of their characteristics. This analysis will reveal the relatively small spatial scale of the effects of HM 164. The paper will then describe subsequent developments that have affected route selection for these materials. These developments include the use of 'representative routes' found in the Department of Energy (DOE) 2008 Supplemental Environmental Impact Statement for the formerly proposed Yucca Mountain geologic repository. The paper will describe recommendations related to route selection found in the National Academy of Sciences 2006 report Going the Distance, as well as recommendations found in the 2012 Final Report of the Blue Ribbon Commission on America's Nuclear Future. The paper will examine recently promulgated federal regulations (HM-232) for selection of rail routes for hazardous materials transport. The paper concludes that while the HM 164 regime is sufficient for certain applications, it does not provide an adequate basis for a national plan to ship spent nuclear fuel and high-level radioactive waste to centralized storage and disposal facilities over a period of 30 to 50 years. (authors)

  8. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The PUC standards generally apply to investor-owned utilities (IOUs) with 40,000 or more customers and all electric cooperatives. Municipal utilities with 5,000 customers or more are required to ...

  9. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Utah’s interconnection rules are based on the Federal Energy Regulatory Commission’s (FERC) interconnection standards for small generators, adopted in May 2005 by FERC Order 2006. Utah's rules for...

  10. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Oregon has three separate interconnection standards: one for net-metered systems, one for small generator facilities (non-net metered systems) and one for large generator facilities (non-net...

  11. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Vermont has adopted separate interconnection standards for net-metered energy systems that are 150 kW or less, and for all other distributed-generation (DG) systems.

  12. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    JEC187V3 UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 of Energy 1000 Independence Avenue, SW Washington, DC 20585 Dear Secretary O'Leary: At the Nuclear Waste UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300 Arlington, VA

  13. Derived Concentration Technical Standard

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-05T23:59:59.000Z

    This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection

  14. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In November 2005, the Indiana Utility Regulatory Commission (IURC) approved rules governing the interconnection of distributed generation (DG). Indiana's interconnection rules require the state's...

  15. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Maine Public Utility Commission (PUC) adopted interconnection procedures in January 2010. These rules apply to all transmission and distribution utilities operating in the state and apply to...

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Utah requires the state's only investor-owned utility, Rocky Mountain Power (RMP), and most electric cooperatives* to offer net metering to customers who generate electricity using solar energy,...

  17. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New Hampshire requires all utilities selling electricity in the state to offer net metering to customers who own or operate systems up to one megawatt (1 MW) in capacity that generate electricity...

  18. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In March 2008, the Florida Public Service Commission (PSC) adopted interconnection rules for renewable-energy systems up to two megawatts (MW) in capacity. The PSC rules apply only to the state's...

  19. Search for physics beyond the standard model in final states with a lepton and missing transverse energy in proton-proton collisions at s = 8 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, V.; Sirunyan, A.?M.; Tumasyan, A.; Adam, W.; Bergauer, T.; Dragicevic, M.; Erö, J.; Fabjan, C.; Friedl, M.; Frühwirth, R.; Ghete, V.?M.; Hartl, C.; Hörmann, N.; Hrubec, J.; Jeitler, M.; Kiesenhofer, W.; Knünz, V.; Krammer, M.; Krätschmer, I.; Liko, D.; Mikulec, I.; Rabady, D.; Rahbaran, B.; Rohringer, H.; Schöfbeck, R.; Strauss, J.; Taurok, A.; Treberer-Treberspurg, W.; Waltenberger, W.; Wulz, C.-E.; Mossolov, V.; Shumeiko, N.; Suarez Gonzalez, J.; Alderweireldt, S.; Bansal, M.; Bansal, S.; Cornelis, T.; De Wolf, E.?A.; Janssen, X.; Knutsson, A.; Luyckx, S.; Ochesanu, S.; Roland, B.; Rougny, R.; Van De Klundert, M.; Van Haevermaet, H.; Van Mechelen, P.; Van Remortel, N.; Van Spilbeeck, A.; Blekman, F.; Blyweert, S.; D’Hondt, J.; Daci, N.; Heracleous, N.; Kalogeropoulos, A.; Keaveney, J.; Kim, T.?J.; Lowette, S.; Maes, M.; Olbrechts, A.; Python, Q.; Strom, D.; Tavernier, S.; Van Doninck, W.; Van Mulders, P.; Van Onsem, G.?P.; Villella, I.; Caillol, C.; Clerbaux, B.; De Lentdecker, G.; Dobur, D.; Favart, L.; Gay, A.?P.?R.; Grebenyuk, A.; Léonard, A.; Mohammadi, A.; Perniè, L.; Reis, T.; Seva, T.; Thomas, L.; Vander Velde, C.; Vanlaer, P.; Wang, J.; Adler, V.; Beernaert, K.; Benucci, L.; Cimmino, A.; Costantini, S.; Crucy, S.; Dildick, S.; Fagot, A.; Garcia, G.; Mccartin, J.; Ocampo Rios, A.?A.; Ryckbosch, D.; Salva Diblen, S.; Sigamani, M.; Strobbe, N.; Thyssen, F.; Tytgat, M.; Yazgan, E.; Zaganidis, N.; Basegmez, S.; Beluffi, C.; Bruno, G.; Castello, R.; Caudron, A.; Ceard, L.; Da Silveira, G.?G.; Delaere, C.; du Pree, T.; Favart, D.; Forthomme, L.; Giammanco, A.; Hollar, J.; Jez, P.; Komm, M.; Lemaitre, V.; Liao, J.; Nuttens, C.; Pagano, D.; Perrini, L.; Pin, A.; Piotrzkowski, K.; Popov, A.; Quertenmont, L.; Selvaggi, M.; Vidal Marono, M.; Vizan Garcia, J.?M.; Beliy, N.; Caebergs, T.; Daubie, E.; Hammad, G.?H.; Aldá Júnior, W.?L.; Alves, G.?A.; Correa Martins Junior, M.; Dos Reis Martins, T.; Pol, M.?E.; Carvalho, W.; Chinellato, J.; Custódio, A.; Da Costa, E.?M.; De Jesus Damiao, D.; De Oliveira Martins, C.; Fonseca De Souza, S.; Malbouisson, H.; Malek, M.; Matos Figueiredo, D.; Mundim, L.; Nogima, H.; Prado Da Silva, W.?L.; Santaolalla, J.; Santoro, A.; Sznajder, A.; Tonelli Manganote, E.?J.; Vilela Pereira, A.; Bernardes, C.?A.; Dias, F.?A.; Fernandez Perez Tomei, T.?R.; Gregores, E.?M.; Mercadante, P.?G.; Novaes, S.?F.; Padula, Sandra S.; Aleksandrov, A.; Genchev, V.; Iaydjiev, P.; Marinov, A.; Piperov, S.; Rodozov, M.; Sultanov, G.; Vutova, M.; Dimitrov, A.; Glushkov, I.; Hadjiiska, R.; Kozhuharov, V.; Litov, L.; Pavlov, B.; Petkov, P.; Bian, J.?G.; Chen, G.?M.; Chen, H.?S.; Chen, M.; Du, R.; Jiang, C.?H.; Liang, D.; Liang, S.; Plestina, R.; Tao, J.; Wang, X.; Wang, Z.; Asawatangtrakuldee, C.; Ban, Y.; Guo, Y.; Li, Q.; Li, W.; Liu, S.; Mao, Y.; Qian, S.?J.; Wang, D.; Zhang, L.; Zou, W.; Avila, C.; Chaparro Sierra, L.?F.; Florez, C.; Gomez, J.?P.; Gomez Moreno, B.; Sanabria, J.?C.; Godinovic, N.; Lelas, D.; Polic, D.; Puljak, I.; Antunovic, Z.; Kovac, M.; Brigljevic, V.; Kadija, K.; Luetic, J.; Mekterovic, D.; Sudic, L.; Attikis, A.; Mavromanolakis, G.; Mousa, J.; Nicolaou, C.; Ptochos, F.; Razis, P.?A.; Bodlak, M.; Finger, M.; Finger, M.; Assran, Y.; Elgammal, S.; Mahmoud, M.?A.; Radi, A.; Kadastik, M.; Murumaa, M.; Raidal, M.; Tiko, A.; Eerola, P.; Fedi, G.; Voutilainen, M.; Härkönen, J.; Karimäki, V.; Kinnunen, R.; Kortelainen, M.?J.; Lampén, T.; Lassila-Perini, K.; Lehti, S.; Lindén, T.; Luukka, P.; Mäenpää, T.; Peltola, T.; Tuominen, E.; Tuominiemi, J.; Tuovinen, E.; Wendland, L.; Tuuva, T.; Besancon, M.; Couderc, F.; Dejardin, M.; Denegri, D.; Fabbro, B.; Faure, J.?L.; Favaro, C.; Ferri, F.; Ganjour, S.; Givernaud, A.; Gras, P.; Hamel de Monchenault, G.; Jarry, P.; Locci, E.; Malcles, J.; Rander, J.; Rosowsky, A.; Titov, M.; Baffioni, S.; Beaudette, F.; Busson, P.; Charlot, C.; Dahms, T.; Dalchenko, M.; Dobrzynski, L.; Filipovic, N.; Florent, A.; Granier de Cassagnac, R.; Mastrolorenzo, L.; Miné, P.; Mironov, C.; Naranjo, I.?N.; Nguyen, M.; Ochando, C.; Paganini, P.; Salerno, R.; Sauvan, J.?B.; Sirois, Y.; Veelken, C.; Yilmaz, Y.; Zabi, A.; Agram, J.-L.; Andrea, J.; Aubin, A.; Bloch, D.; Brom, J.-M.; Chabert, E.?C.; Collard, C.; Conte, E.; Fontaine, J.-C.; Gelé, D.; Goerlach, U.; Goetzmann, C.; Le Bihan, A.-C.; Van Hove, P.; Gadrat, S.; Beauceron, S.; Beaupere, N.; Boudoul, G.; Brochet, S.; Carrillo Montoya, C.?A.; Chasserat, J.; Chierici, R.; Contardo, D.; Depasse, P.; El Mamouni, H.; Fan, J.; Fay, J.; Gascon, S.; Gouzevitch, M.; Ille, B.; Kurca, T.; Lethuillier, M.; Mirabito, L.; Perries, S.; Ruiz Alvarez, J.?D.; Sabes, D.; Sgandurra, L.

    2015-05-01T23:59:59.000Z

    A search for new physics in proton-proton collisions having final states with an electron or muon and missing transverse energy is presented.

  20. APPLIANCE STANDARDS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del(ANL-IN-03-032)8Li (59AJ76) (See theDoctoral20ALSNewstt^APPLIANCE STANDARDS How they

  1. Interconnection Standards

    Broader source: Energy.gov [DOE]

    '''''Note: In July 2012, the Public Utilities Commission of Ohio (PUCO) opened a docket ([http://dis.puc.state.oh.us/CaseRecord.aspx?CaseNo=12-2051&x=0&y=0 Case 12-0251-EL-ORD]) to review...

  2. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for Department of Veterans Affairs – VA Manhattan Campus

    SciTech Connect (OSTI)

    Stephen Schey; Jim Francfort

    2014-10-01T23:59:59.000Z

    This report focuses on the Department of Veterans Affairs, VA Manhattan Campus (VA- Manhattan) fleet to identify the daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support successful introduction of plug-in electric vehicles (PEVs) into the agency’s fleet. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively called PEVs) can fulfill the mission requirements.

  3. STATE OF CALIFORNIA MECHANICAL VENTILATION AND REHEAT

    E-Print Network [OSTI]

    STATE OF CALIFORNIA MECHANICAL VENTILATION AND REHEAT CEC-MECH-3C (Revised 08/09) CALIFORNIA ENERGY COMMISSION MECHANICAL VENTILATION AND REHEAT MECH-3C PROJECT NAME DATE MECHANICAL VENTILATION §121(b)2 REHEAT'D V.A. Max of D or G Design Ventilation Air cfm 50% of Design Zone Supply cfm B x 0.4 cfm/ft² Max

  4. UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD

    E-Print Network [OSTI]

    of the overall system for managing spent fuel and defense high-level waste. The Board includes its findingsjlc029va UNITED STATES NUCLEAR WASTE TECHNICAL REVIEW BOARD 2300 Clarendon Boulevard, Suite 1300, D.C. 20585 Dear Speaker Gingrich, Senator Thurmond, and Secretary Peña: The Nuclear Waste Technical

  5. Effect of flow rate of ethanol on growth dynamics of VA-SWNT -Transition from no-flow CVD to normal ACCVD

    E-Print Network [OSTI]

    Maruyama, Shigeo

    Effect of flow rate of ethanol on growth dynamics of VA-SWNT - Transition from no-flow CVD a growth model [2]. In this study, the flow rate of ethanol during the CVD was controlled precisely. Figure 1 shows the growth curve of VA-SWNT film for various ethanol flow rates. In the figure, "No

  6. UNIVERSITY STANDARDS AND REGULATIONS

    E-Print Network [OSTI]

    Royer, Dana

    2014­2015 UNIVERSITY STANDARDS AND REGULATIONS #12;Wesleyan University does not discriminate STANDARDS OF CONDUCT

  7. UNIVERSITY STANDARDS AND REGULATIONS

    E-Print Network [OSTI]

    Royer, Dana

    2013­2014 UNIVERSITY STANDARDS AND REGULATIONS #12;Wesleyan University does not discriminate STANDARDS OF CONDUCT

  8. ASA HONORS 63 NEW FELLOWS ALEXANDRIA VA, JUNE 11, 2014 The American Statistical Association (ASA), the nation's preeminent

    E-Print Network [OSTI]

    Zhu, Mu

    1 ASA HONORS 63 NEW FELLOWS ALEXANDRIA VA, JUNE 11, 2014 ­ The American Statistical Association the American Statistical Association The American Statistical Association is the world's largest community information about the American Statistical Association, please visit the ASA website at www

  9. LANL Fuel Cell Research 1HFCIT Program Kick-off Meeting, Arlington, VA, February 13-14, 2007

    E-Print Network [OSTI]

    physicochemical characterization, electrochemical and fuel cell testing · Optimize catalysts, supportsLANL Fuel Cell Research 1HFCIT Program Kick-off Meeting, Arlington, VA, February 13-14, 2007 Laboratory Hydrogen, Fuel Cells and Infrastructure Technologies Radoslav Adzic Paolina Atanassova Cabot

  10. Surface Water Quality Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    These standards establish the designated uses and antidegradation categories of the State's surface waters, classify surface waters based on those uses (i.e., stream classifications), and specify...

  11. Surface Water and Wetland Standards (North Carolina)

    Broader source: Energy.gov [DOE]

    These rules state the standards for classification of water supply. Each stream in North Carolina has a classification based upon its designated uses. These rules provide the Environmental...

  12. Energy Efficiency Resource Standard | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Washington Program Type Energy Efficiency Resource Standard Provider Washington State Department of Commerce Washington voters passed http:www.secstate.wa.govelections...

  13. Evergreen Sustainable Development Standard for Affordable Housing

    Broader source: Energy.gov [DOE]

    The Washington State Department of Commerce created the Evergreen Sustainable Development Standard, a set of green building criteria that is required for any affordable housing project applying for...

  14. Developing Integrated National Design Standards for Offshore...

    Energy Savers [EERE]

    report that summarizes the regulations, standards, and guidelines for the design and operation of offshore wind projects in the United States. In 2012, the American Wind Energy...

  15. Standard room is W1 0 015 (unless otherwise expressively stated). Other locations are the CIP Cluster (Computer Room), the Energy

    E-Print Network [OSTI]

    Peinke, Joachim

    ) 10:00 Coffee Break 10:15 Keynote Lecture I: Photovoltaics - Technology and Application - a Report on the State of Art Dr. Hansjörg Gabler, Head of Department "Photovoltaics" Center for Solar Energy Efficiency Partnership, Int Sec. Vienna 11:45 Lunch Break Session 1: Systems Analysis and Simulation, Part 1

  16. Microfabricated ion frequency standard

    SciTech Connect (OSTI)

    Schwindt, Peter (Albuquerque, NM); Biedermann, Grant (Albuquerque, NM); Blain, Matthew G. (Albuquerque, NM); Stick, Daniel L. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM); Olsson, III, Roy H. (Albuquerque, NM)

    2010-12-28T23:59:59.000Z

    A microfabricated ion frequency standard (i.e. an ion clock) is disclosed with a permanently-sealed vacuum package containing a source of ytterbium (Yb) ions and an octupole ion trap. The source of Yb ions is a micro-hotplate which generates Yb atoms which are then ionized by a ultraviolet light-emitting diode or a field-emission electron source. The octupole ion trap, which confines the Yb ions, is formed from suspended electrodes on a number of stacked-up substrates. A microwave source excites a ground-state transition frequency of the Yb ions, with a frequency-doubled vertical-external-cavity laser (VECSEL) then exciting the Yb ions up to an excited state to produce fluorescent light which is used to tune the microwave source to the ground-state transition frequency, with the microwave source providing a precise frequency output for the ion clock.

  17. Seminar on building codes and standards

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    A seminar was conducted for state building code officials and state energy officials to discuss the following: status of the states regulatory activities for energy conservation standards for buildings; the development, administration, and enforcement processes for energy conservation standards affecting new construction; lighting and thermal standards for existing buildings; status of the development and implementation of the Title III Program, Building Energy Performance Standards (BEPS); and current status of the State Energy Conservation Program. The welcoming address was given by John Wenning and the keynote address was delivered by John Millhone. Four papers presented were: Building Energy Performance Standards Development, James Binkley; Lighting Standards in Existing Buildings, Dorothy Cronheim; Implementation of BEPS, Archie Twitchell; Sanctions for Building Energy Performance Standards, Sue Sicherman.

  18. December 2006 Standards Forum and Standards Actions

    Energy Savers [EERE]

    -9 Cancellations in Progress - 0 Inside This Issue Visit the Technical Standards Program Web Site at http:tis.eh.doe.govtechstds December 2006 The Standards Forum and Standards...

  19. For more inFormation: www.ccm.uc.edu/dance ccmadmis@uc.edu 513-556-5463 C o l l e g e -C o n s e r va t o r y o f m u s i c

    E-Print Network [OSTI]

    Papautsky, Ian

    For more inFormation: www.ccm.uc.edu/dance ccmadmis@uc.edu 513-556-5463 C o l l e g e - C o n s e r va t o r y o f m u s i c At the University of Cincinnati College-Conservatory of Music (CCM arts. The CCM Dance Division boasts a distinguished, dynamic faculty, state of the art facilities

  20. For more inFormation: www.ccm.uc.edu ccmadmis@uc.edu 513-556-5463 C o l l e g e -C o n s e r va t o r y o f m u s i c

    E-Print Network [OSTI]

    Papautsky, Ian

    For more inFormation: www.ccm.uc.edu ccmadmis@uc.edu 513-556-5463 C o l l e g e - C o n s e r va are abundant. CCM houses almost 1,000 performances each year in state-of-the- art spaces. Each degree program program, and CCM holds annual concerto and scholarship competitions. Faculty and guest artists conduct

  1. C o l l e g e -C o n s e r va t o r y o f M u s i c For More inForMation: www.ccm.uc.edu/winds wintherk@uc.edu 513-556-2160

    E-Print Network [OSTI]

    Papautsky, Ian

    C o l l e g e - C o n s e r va t o r y o f M u s i c For More inForMation: www.ccm, while serving as a model for similar ensembles in the United States. The CCM Chamber Winds is a small by Terence Milligan draws its membership from the finest undergraduate and graduate musicians at CCM

  2. Content Literacy Tied to the New Standards

    E-Print Network [OSTI]

    Stuart, Steven J.

    Content Literacy Tied to the New Standards Tom Peters, Ed.D. SC Coalition for Mathematics & Science as they relate to the Common Core State Standards for Mathematics and the Next Generation Science Standards*. #12 in extended discussion about those ideas. Framework for K-12 Science pg 76 #12;So What Does this mean in K-12

  3. NREL Assesses National Design Standards for Offshore Wind (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-06-01T23:59:59.000Z

    Report summarizes regulations, standards, and guidelines for the design and operation of offshore wind projects in the United States.

  4. Geothermal Power Plants — Meeting Water Quality and Conservation Standards

    Broader source: Energy.gov [DOE]

    U.S. geothermal power plants can easily meet federal, state, and local water quality and conservation standards.

  5. Development of a large-capacity superconducting cable for 100 kVA-class power transformers

    SciTech Connect (OSTI)

    Funaki, K.; Iwakuma, M.; Satoh, S.; Hiramatsu, M.; Takeo, M.; Yamafuji, K.; Nonaka, S. (Kyushu Univ., Fukuoka (Japan). Faculty of Engineering); Hoshino, M.; Simada, M.; Yoneda, E.S. (Toshiba Corp., Yokohama (JP))

    1992-01-01T23:59:59.000Z

    This paper reports that the authors have designed and fabricated a large-capacity superconducting cable for 1000k VA-class power transformers. The cable is a triply-stacked multi-strand (6 {times} 6 {times} 6) type. The elementary strand has 19,050 NbTi filaments of 0.63 mm thick in CuNi matrix. The test cable is installed as the secondary winding in a superconducting transformer with iron core in a room-temperature space. The primary winding is the second-level subcable of the secondary one and the turn ratio is nearly 14. The designed capacity of the test cable is 4.545 kA at the secondary voltage of 220V. The peak value of the current, 6.43kA (peak), is 78% of the critical current on the load line. The maximum current of the cable at 60Hz operation was 3.78kA (peak). The attained level of the secondary winding is 47% of the critical current. In the 60Hz operation of a small coil wound by the test cable, premature quench was initiated from the terminals of the cable connected with copper plates. It is suggested from the experimental results that the degradation in maximum current of the test cable is related to current transfer between the cable and the copper terminal plates.

  6. Reynolds Homestead Forestry Resources Research Center407HomesteadLane,Critz,VA24082276-694-4135www.arec.vaes.vt.edu/reynolds-homestead Physical Resources

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Reynolds Homestead Forestry Resources Research Center407HomesteadLane,Critz,VA24082 Research and Extension Focus Areas Kyle Peer Extension Specialist, Forestry Christmas trees, works Professor, Forestry (FOR) Forestry best management practices and erosion control Amy Brunner Associate

  7. Search for the Standard Model Higgs Boson in Missing Transverse Energy and $b$-quark Final States Using Proton-Antiproton Collisions at 1.96 TeV

    SciTech Connect (OSTI)

    Dorland, Tyler M.; /Washington U., Seattle

    2011-03-01T23:59:59.000Z

    A search for the standard model Higgs boson is performed in 6.4 fb{sup -1} of p{bar p} collisions at {radical}s = 1.96 TeV, collected with the D0 detector during Run II of the Fermilab Tevatron. The final state considered is a pair of jets originating from b quarks and missing transverse energy, as expected from p{bar p} {yields} ZH {yields} {nu}{bar {nu}}b{bar b} production. The search is also sensitive to the WH {yields} {ell}{nu}b{bar b} channel, where the charged lepton is not identified. Boosted decision trees are used to discriminate signal from background. Good agreement is observed between data and expected backgrounds, and a limit is set at 95% C.L. on the section multiplied by branching fraction of (p{bar p} {yields} (Z/W)H) x (H {yields} b{bar b}). For a Higgs boson mass of 115 GeV, the observed limit is a factor of 3.5 larger than the value expected from the standard model.

  8. Characterization of the environmental fate of Bacillus thuringiensis var. kaurstaki (Btk) after pest eradication efforts in Seattle, WA and Fairfax county, VA

    SciTech Connect (OSTI)

    Ticknor, Lawrence [Los Alamos National Laboratory; Van Cuyk, Sheila M [Los Alamos National Laboratory; Deshpande, Alina [Los Alamos National Laboratory; Omberg, Kristin M [Los Alamos National Laboratory

    2008-01-01T23:59:59.000Z

    Understanding the fate of biological agents in the environment will be critical to recovery and restoration efforts after a biological attack. Los Alamos National Laboratory (LANL) is conducting experiments in the Seattle, WA and Fairfax County, VA areas to study agent fate in urban environments. As part of their gypsy moth suppression efforts, Washington State and Fairfax County have sprayed Bacillus thuringiensis var. kurstaki (Btk), a common organic pesticide for decades. Many of the spray zones have been in or near urban areas. LANL has collected surface and bulk samples from historical Seattle spray zones to characterize how long Btk persists at detectable levels in the environment, and how long it remains viable in different environmental matrices. This work will attempt to address three questions. First, how long does the agent remain viable at detectable levels? Second, what is the approximate magnitude and duration of resuspension? And third, does the agent transport into buildings? Data designed to address the first question will be presented. Preliminary results indicate Btk remains viable in the environment for at least two years.

  9. Virginia State Police www.vsp.virginia.gov Media Release

    E-Print Network [OSTI]

    Virginia Tech

    ) on the Smart Road at Virginia Tech. At the time of the armed robbery, Radford City Police had issued a multi of an abandoned vehicle on the Smart Road on Dec. 8, they immediately notified Radford City Police of its recovery-SUICIDE Radford City Police Link Auto Theft to Gunman BLACKSBURG, Va. ­ Virginia State Police have identified

  10. Communication Standards and Recommendations

    E-Print Network [OSTI]

    Communication Standards and Recommendations Introduction & Purpose 3 Standards & Recommendations Communication 4 Training 10 Evaluation 11 PMO Workgroup Participation 12 Staffing 12 Communications-related Tracking Grantee Portal Standards and Recommendations 13

  11. August 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    August 2007 1.5 DOE Technical Standards Published No entries were received in August 2007 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  12. July 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    in June 2007 1.5 DOE Technical Standards Published No entries were received in June 2007 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  13. October 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Project No. SAFT-0109 Continued on next page Standards Actions Page 2 October 2006 2.0 NON-GOVERNMENT STANDARDS ACTIONS 2.1 American National Standards Institute American...

  14. July 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    were received in June 2006. Continued on next page Standards Actions Page 2 July 2005 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  15. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  16. November 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  17. October 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  18. May 2008 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  19. May 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  20. February 2001 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Technical Standards Program Document Status Visit the Technical Standards Program Web Site: http:tis.eh.doe.govtechstds Activity Summary In Conversion - 4 In Preparation...

  1. Teacher Instructions: California State Standard's Covered

    E-Print Network [OSTI]

    Spakowitz, Andrew J.

    . Materials: ¼ of a cabbage Blender Strainer Large Container ~500 ml---1L Beaker 7 plastic cups 7 plastic

  2. Single-cycle terahertz pulses with >0.2 V/A field amplitudes via coherent transition radiation

    SciTech Connect (OSTI)

    Daranciang, Dan [Department of Chemistry, Stanford University, Stanford, California 94305 (United States); PULSE Institute for Ultrafast Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Goodfellow, John [Department of Materials Science and Engineering, Stanford University, Stanford, California 94305 (United States); Stanford Institute for Materials and Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Fuchs, Matthias; Ghimire, Shambhu [PULSE Institute for Ultrafast Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Wen, Haidan [Advanced Photon Source, Argonne National Laboratory, Argonne, Illinois 60439 (United States); Reis, David A. [PULSE Institute for Ultrafast Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Stanford Institute for Materials and Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Department of Applied Physics, Stanford University, Stanford, California 94305 (United States); Loos, Henrik; Fisher, Alan S. [Linac Coherent Light Source, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Lindenberg, Aaron M. [PULSE Institute for Ultrafast Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Department of Materials Science and Engineering, Stanford University, Stanford, California 94305 (United States); Stanford Institute for Materials and Energy Science, SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States)

    2011-10-03T23:59:59.000Z

    We demonstrate terahertz pulses with field amplitudes exceeding 0.2 V/A generated by coherent transition radiation. Femtosecond, relativistic electron bunches generated at the Linac Coherent Light Source are passed through a beryllium foil, and the emitted radiation is characterized as a function of the bunch duration and charge. Broadband pulses centered at a frequency of 10 THz with energies of 140 {mu}J are measured. These far-below-bandgap pulses drive a nonlinear optical response in a silicon photodiode, with which we perform nonlinear autocorrelations that yield information regarding the terahertz temporal profile. Simulations of the spatiotemporal profile agree well with experimental results.

  3. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  4. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19T23:59:59.000Z

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  5. Standard 90, the planning

    SciTech Connect (OSTI)

    Not Available

    1985-10-01T23:59:59.000Z

    In order to understand the current proposed ANS/ASHRAE/IES Standard 90.1 Energy Efficient Design of New Non-Residential Buildings and New High-Rise, Residential Buildings, this article offers background on the initial Standard, the organization of the Standard committee, and the objectives established for the proposed Standard 90.1.

  6. Luminous Efficacy Standards for General Purpose Lights

    Broader source: Energy.gov [DOE]

    Assembly Bill 178, adopted in June 2007, established efficacy* standards for general purpose lights sold in the state of Nevada. The bill set the required efficacy at 25 lumens per watt (lm/W) of...

  7. Hazardous Waste Management Standards and Regulations (Kansas)

    Broader source: Energy.gov [DOE]

    This act states the standards and regulations for the management of hazardous waste. No person shall construct, modify or operate a hazardous waste facility or otherwise dispose of hazardous waste...

  8. Technical Standards,DOE Standards and Corresponding Directives...

    Broader source: Energy.gov (indexed) [DOE]

    February 2, 2002 DOE Standards and Corresponding Directives Crosswalk DOE Standards and Corresponding Directives Crosswalk table Technical Standards,DOE Standards and Corresponding...

  9. Validation of KENO V.a for highly enriched uranium systems with hydrogen and/or carbon moderation

    SciTech Connect (OSTI)

    Elliott, E.P.; Vornehm, R.G. [Oak Ridge Y-12 Plant, TN (United States); Dodds, H.L. Jr. [Univ. of Tennessee, Knoxville, TN (United States). Nuclear Engineering Dept.

    1993-06-04T23:59:59.000Z

    This paper describes the validation in accordance with ANSI/ANS-8.1-1983(R1988) of KENO V.a using the 27-group ENDF/B-IV cross-section library for systems containing highly-enriched uranium, carbon, and hydrogen and for systems containing highly-enriched uranium and carbon with high carbon to uranium (C/U) atomic ratios. The validation has been performed for two separate computational platforms: an IBM 3090 mainframe and an HP 9000 Model 730 workstation, both using the Oak Ridge Y-12 Plant Nuclear Criticality Safety Software (NCSS) code package. Critical experiments performed at the Oak Ridge Critical Experiments Facility, in support of the Rover reactor program, and at the Pajarito site at Los Alamos National Laboratory were identified as having the constituents desired for this validation as well as sufficient experimental detail to allow accurate construction of KENO V.a calculational models. Calculated values of k{sub eff} for the Rover experiments, which contain uranium, carbon, and hydrogen, are between 1.0012 {+-} 0.0026 and 1.0245 {+-} 0.0023. Calculation of the Los Alamos experiments, which contain uranium and carbon at high C/U ratios, yields values of k{sub eff} between 0.9746 {+-} 0.0028 and 0.9983 {+-} 0.0027. Safety criteria can be established using this data for both types of systems.

  10. April 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    and Injury Surveillance Program Guidelines, 03222007; DOE-STD-1190-2007, OCSH-0005 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  11. Puerto Rico- Interconnection Standards

    Broader source: Energy.gov [DOE]

    In 2007, the Autoridad de Energía Electrica de Puerto Rico (PREPA*) adopted interconnection standards based on the standard contained in the federal Energy Policy Act of 2005. PREPA promulgated...

  12. AVTA Federal Fleet PEV Readiness Data Logging and Characterization Study for Department of Veterans Affairs. James J. Peters VA Medical Center, Bronx, NY

    SciTech Connect (OSTI)

    Schey, Stephen [Intertek Testing Services, North America, Phoenix, AZ (United States); Francfort, Jim [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-10-01T23:59:59.000Z

    This report focuses on the Department of Veterans Affairs, James J. Peters VA Medical Center (VA - Bronx) fleet to identify daily operational characteristics of select vehicles and report findings on vehicle and mission characterizations to support the successful introduction of PEVs into the agencies’ fleets. Individual observations of these selected vehicles provide the basis for recommendations related to electric vehicle adoption and whether a battery electric vehicle or plug-in hybrid electric vehicle (collectively referred to as PEVs) can fulfill the mission requirements.

  13. Meeting Residential Ventilation Standards

    E-Print Network [OSTI]

    ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning EngineersLBNL 4591E Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide

  14. Barriers to CHP with Renewable Portfolio Standards, Draft White...

    Broader source: Energy.gov (indexed) [DOE]

    development of state renewable portfolio standards (RPS) has helped spur the growth of renewable energy projects, including solar, wind, and biomass power. This report aims to...

  15. Office of Codes and Standards resource book. Section 1, Building energy codes and standards

    SciTech Connect (OSTI)

    Hattrup, M.P.

    1995-01-01T23:59:59.000Z

    The US Department of Energy`s (DOE`s) Office of Codes and Standards has developed this Resource Book to provide: A discussion of DOE involvement in building codes and standards; a current and accurate set of descriptions of residential, commercial, and Federal building codes and standards; information on State contacts, State code status, State building construction unit volume, and State needs; and a list of stakeholders in the building energy codes and standards arena. The Resource Book is considered an evolving document and will be updated occasionally. Users are requested to submit additional data (e.g., more current, widely accepted, and/or documented data) and suggested changes to the address listed below. Please provide sources for all data provided.

  16. RF CONTROL REQUIREMENTS FOR THE CEBAF ENERGY UPGRADE C. Hovater, J. Delayen, L. Merminga, T. Powers, C. Reece, Jefferson Lab, Newport News, VA

    E-Print Network [OSTI]

    RF CONTROL REQUIREMENTS FOR THE CEBAF ENERGY UPGRADE CAVITIES* C. Hovater, J. Delayen, L. Merminga, T. Powers, C. Reece, Jefferson Lab, Newport News, VA Abstract The 6 GeV CEBAF accelerator superconducting cavity for the CEBAF and FEL upgrades. From the low-level RF (LLRF) controls perspective higher

  17. U.S. Department of Energy Hydrogen and Fuel Cells Program 2012 Annual Merit Review and Peer Evaluation Report: May 14-18, 2012, Arlington, VA

    SciTech Connect (OSTI)

    Not Available

    2012-09-01T23:59:59.000Z

    This document summarizes the comments provided by peer reviewers on hydrogen and fuel cell projects presented at the fiscal year (FY) 2012 U.S. Department of Energy (DOE) Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting (AMR), held May 14-18, 2012, in Arlington, VA.

  18. PNL-SA-24733 Presented at the Advanced Information Systems and Technology Conference 28-30 March 1994 in Williamsburg, VA.

    E-Print Network [OSTI]

    in the AGT-1500 gas turbine engine of the M1A1 Abrams tank. This paper describes the design and prototype 1994 in Williamsburg, VA. TEDANN: TURBINE ENGINE DIAGNOSTIC ARTIFICIAL NEURAL NETWORK Lars J. Kangas development of the diagnostic system, referred to as "TEDANN" for Turbine Engine Diagnostic Artificial Neural

  19. Jimmy Krozel is with Metron Aviation, Inc., Herndon, VA. Changkil Lee and Joseph S.B. Mitchell are with Stony Brook University, Stony Brook, NY.

    E-Print Network [OSTI]

    Mitchell, Joseph S.B.

    [Federal Aviation Administration, 2003]) lists weather as the leading cause (65% to 75%) of delays greater inclement weather, throughput is adversely affected. The Aviation Capacity Enhancement Plan (FAA ACE Plan. Jimmy Krozel is with Metron Aviation, Inc., Herndon, VA. Changkil Lee and Joseph S.B. Mitchell

  20. CONVERSION OF DOE TECHNICAL STANDARDS TO NON-GOVERNMENT STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the conversion of DOE Technical Standards to Voluntary Consensus Standards (VCSs), also referred to as non-Government standards

  1. Distributed Generation Standard Contracts

    Broader source: Energy.gov [DOE]

    '''''Note: The second enrollment period for standard contracts in 2013 closed June 28. The third is scheduled to begin in September.'''''

  2. Particulate Matter Standards (Ohio)

    Broader source: Energy.gov [DOE]

    This chapter of the law establishes that the Ohio Environmental Protection Agency sets the standards for particulate emissions from a variety of sources, including facilities that generate power. ...

  3. The Standard Model

    ScienceCinema (OSTI)

    Lincoln, Don

    2014-08-12T23:59:59.000Z

    Fermilab scientist Don Lincoln describes the Standard Model of particle physics, covering both the particles that make up the subatomic realm and the forces that govern them.

  4. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14T23:59:59.000Z

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  5. Groundwater Quality Standards (Nebraska)

    Broader source: Energy.gov [DOE]

    These regulations, promulgated by the Department of Environmental Quality, contain groundwater quality standards and classifications, regulations for point sources, and provisions for remedial action.

  6. February 2008 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection...

  7. November 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection...

  8. National Certification Standard

    Broader source: Energy.gov (indexed) [DOE]

    Certification Standard for the Geothermal Heat Pump Industry Principal Investigator John Kelly Geothermal Heat Pump Consortium GSHP Demonstration Projects May 18, 2010 This...

  9. Columbia- Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    In November 2004, voters in Columbia, Missouri approved a proposal to adopt a local renewables portfolio standard (RPS).* The initiative requires the city's municipal utility, Columbia Water and...

  10. Standards Actions, October 2000

    Broader source: Energy.gov (indexed) [DOE]

    61326-1-am2-2000, Electrical equipment for measure- ment, control and laboratory use - EMC requirements - Part 1: General requirements. American National Standards Projects...

  11. Search for the standard model Higgs boson decaying to a $W$ pair in the fully leptonic final state in $pp$ collisions at $\\sqrt{s}=7$ TeV

    SciTech Connect (OSTI)

    Chatrchyan, Serguei; et al.

    2012-03-01T23:59:59.000Z

    A search for the standard model Higgs boson decaying to W+W- in pp collisions at sqrt(s) = 7 TeV is reported. The data are collected at the LHC with the CMS detector, and correspond to an integrated luminosity of 4.6 inverse femtobarns. The W+W- candidates are selected in events with two charged leptons and large missing transverse energy. No significant excess of events above the standard model background expectations is observed, and upper limits on the Higgs boson production relative to the standard model Higgs expectation are derived. The standard model Higgs boson is excluded in the mass range 129-270 GeV at 95% confidence level.

  12. Standard guide for sampling radioactive tank waste

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01T23:59:59.000Z

    1.1 This guide addresses techniques used to obtain grab samples from tanks containing high-level radioactive waste created during the reprocessing of spent nuclear fuels. Guidance on selecting appropriate sampling devices for waste covered by the Resource Conservation and Recovery Act (RCRA) is also provided by the United States Environmental Protection Agency (EPA) (1). Vapor sampling of the head-space is not included in this guide because it does not significantly affect slurry retrieval, pipeline transport, plugging, or mixing. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  13. MODEL CONSERVATION STANDARD INTRODUCTION

    E-Print Network [OSTI]

    programs, the standard for all new commercial buildings, the standard for utility commercial conservation RESIDENTIAL AND COMMERCIAL BUILDINGS The region should acquire all electric energy conservation measure savings from new residential and new commercial buildings that have a benefit-to-cost ratio greater than

  14. How good are the Common Core Mathematics Standards?

    E-Print Network [OSTI]

    Wu, Hung-Hsi

    the grade 8 CA standards. Rather, there is a trade-off: each does some things that the other doesn't. #12How good are the Common Core Mathematics Standards? Concord, CA October 29, 2012 H. Wu sets of math standards in the nation, maybe the best. Why did it adopt the CCSSM (Common Core State

  15. Topological invariants for Standard Model: from semi-metal to topological insulator

    E-Print Network [OSTI]

    G. E. Volovik

    2010-01-18T23:59:59.000Z

    We consider topological invariants describing semimetal (gapless) and insulating (gapped) states of the quantum vacuum of Standard Model and possible quantum phase transitions between these states.

  16. The Potential Economic Impacts of a Renewable Portfolio Standard

    E-Print Network [OSTI]

    Delaware, University of

    , hydropower, and biomass) according to a specified schedule. Many states are prioritizing renewable energyThe Potential Economic Impacts of a Renewable Portfolio Standard in Delaware Briefing Paper of Figures Figure 1. State Renewable Portfolio Standards in the U.S. ..................... 1 Figure 2. Retail

  17. DOE Coordination Meeting CODES & STANDARDS

    E-Print Network [OSTI]

    of the International Standards Organization's standards for hydrogen refueling and storage, by 2006; · Complete. Provide technical resources to harmonize the development of international standards among IEC, ISO negotiations with critical Standard Development Organizations and develop draft generic licensing agreement

  18. US Department of Energy Office of Codes and Standards resource book

    SciTech Connect (OSTI)

    NONE

    1996-01-01T23:59:59.000Z

    The US Department of Energy`s (DOE`s) Office of Codes and Standards has developed this Resource Book to provide a discussion of DOE involvement in building codes and standards; a current and accurate set of descriptions of residential, commercial, and Federal building codes and standards; information on State contacts, State code status, State building construction unit volume, and State needs; and a list of stockholders in the building energy codes and standards arena.

  19. DOE technical standards list. Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  20. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

    1999-01-01T23:59:59.000Z

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  1. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  2. Search for the Standard Model Higgs Boson Produced in Association with a Z Boson in the Electron-Muon Final State and the Higgs Boson Decaying into Bottom Quarks

    E-Print Network [OSTI]

    Bartek, Rachel A.

    2013-01-01T23:59:59.000Z

    Vector Boson Reconstruction . . . . . . . . . Higgs Boson4 The Search for the SM Higgs boson in eµb ¯ b final stateing fractions (right) of the SM Higgs boson. . . . . . . . .

  3. Roundness calibration standard

    DOE Patents [OSTI]

    Burrus, Brice M. (6620 Wachese La., Knoxville, TN 37912)

    1984-01-01T23:59:59.000Z

    A roundness calibration standard is provided with a first arc constituting the major portion of a circle and a second arc lying between the remainder of the circle and the chord extending between the ends of said first arc.

  4. Energy Efficiency Resource Standard

    Broader source: Energy.gov [DOE]

    In 2008, New Mexico enacted H.B. 305, the Efficient Use of Energy Act, which created an Energy Efficiency Resource Standard (EERS) for New Mexico’s electric utilities, and a requirement that all ...

  5. Standards Actions, July 2001

    Broader source: Energy.gov (indexed) [DOE]

    - Standard method for testing the long-term alpha irradiation stability of so- lidified high-level radioactive waste forms - Septem- ber 8, 2001. * ISODIS 14830-1, Condition...

  6. August 2001 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    - May 10, 2001. ANSIASTM D6239-01, Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid- Scintillation Spectrometry (new standard) - May 22, 2001....

  7. Building Energy Standards

    Broader source: Energy.gov [DOE]

    The 2015 Vermont Commercial Building Energy Standards (CBES) took effect on March 1, 2015. The code is based on the 2015 IECC, with amendments to incorporate ASHRAE 90.1-2013. The new guidelines ...

  8. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The order establishes the DOE Technical Standards Program. Cancels DOE O 252.1 and DOE G 252.1-1. Admin Chg 1, dated 3-12-13 cancels DOE O 252.1A.

  9. Drinking Water Standards

    E-Print Network [OSTI]

    Dozier, Monty; McFarland, Mark L.

    2006-04-26T23:59:59.000Z

    This publication explains the federal safety standards for drinking water provided by public water supply systems. It discusses the legal requirements for public water supplies, the maximum level allowed for contaminants in the water...

  10. Standards Actions, May 2001

    Broader source: Energy.gov (indexed) [DOE]

    Standards are proposed for reaffirmation: * DOE-HDBK-1081-94, Primer on Spontaneous Heating and Pyrophoricity, Decem- ber 1994. * DOE-STD-1027-92, including Change Notice 1,...

  11. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    In January 2005, the District of Columbia Council enacted a renewable portfolio standard (RPS) that applies to all retail electricity sales in the District. In October 2008 the RPS was amended by...

  12. FREIGHT CONTAINER LIFTING STANDARD

    SciTech Connect (OSTI)

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13T23:59:59.000Z

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  13. February 2002 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Protection of Electronic Com- puterData Processing Equipment (revision of ANSINFPA 75-1999) - February 26, 2002. NFPA 80, Standard for Fire Doors and Fire Windows (revision of...

  14. Standardization of Firearms

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-02T23:59:59.000Z

    Establishes Department of Energy (DOE) requirements for the standardization of firearms and limitations of firearms inventories maintained in support of safeguards and security activities. Does not cancel other directives.

  15. Reliability Standards Owner

    Broader source: Energy.gov [DOE]

    This position is located in the Internal Operations and Asset Management group of Planning and Asset Management (TP). A successful candidate in this position will serve as the Reliability Standards...

  16. Low Carbon Fuel Standards

    E-Print Network [OSTI]

    Sperling, Dan; Yeh, Sonia

    2009-01-01T23:59:59.000Z

    S O N I A YE H Low Carbon Fuel Standards The most direct andalternative transportation fuels is to spur innovation withstandard for upstream fuel producers. hen it comes to energy

  17. Energy Efficiency Standard

    Broader source: Energy.gov [DOE]

    In 2008, Iowa enacted S.B. 2386, which requires the Iowa Utilities Board (IUB) to create energy savings standards (electricity and natural gas) for all rate-regulated utilities. The IUB ordered...

  18. EPCglobal : a universal standard

    E-Print Network [OSTI]

    Aguirre, Juan Ignacio

    2007-01-01T23:59:59.000Z

    This thesis evaluates the likelihood of EPCglobal becoming the universal RFID standard by presenting a framework of ten factors used to analyze and determine if EPCglobal is moving in the right direction. The ten factors ...

  19. Standards Actions, April 2000

    Broader source: Energy.gov (indexed) [DOE]

    Technical Standard on this matter no longer exists. Occupational Safety and Health Handbook, Project Number HFAC-0011; Terry Krietz, EH-51; 301-903-6456, Fax 301-903-2239,...

  20. Colorado State University Brand Toolbox I Design principles

    E-Print Network [OSTI]

    Colorado State University Brand Toolbox I Design principles Graphic standards Communicators Updated 3/2013 #12;Communications Assurance...................................... 1 Graphic Standards, or general consent as a model or example; criterion. Graphic Standards #12;Colorado State University Brand

  1. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01T23:59:59.000Z

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  2. Search for the Standard Model Higgs Boson Decaying to W[superscript +]W[superscript -] in the Fully Leptonic Final State in pp Collisions at ?s = 7 TeV

    E-Print Network [OSTI]

    Alver, B.

    A search for the standard model Higgs boson decaying to W[superscript +]W[superscript ?] in pp collisions at ?s = 7 TeV is reported. The data are collected at the LHC with the CMS detector, and correspond to an integrated ...

  3. Seminar on Software Engineering Software Standards

    E-Print Network [OSTI]

    Feitelson, Dror

    is that there are so many of them" #12;Types of Standards Coding standards APIs and protocols Process standards Quality standards #12;Types of Standards Coding standards APIs and protocols Process standards Quality standards of Standards Coding standards APIs and protocols Process standards Quality standards STL and Java libraries

  4. Technical Standards, Style Guide- August 1, 2000

    Broader source: Energy.gov [DOE]

    Style Guide for the Preparation of DOE Technical Standards (Standards, Handbooks, and Technical Standards Lists)

  5. Albert Einstein College of Medicine o f y e s h i va u n i v e r s i t y

    E-Print Network [OSTI]

    Yates, Andrew

    1 Albert Einstein College of Medicine o f y e s h i va u n i v e r s i t y 2 0 0 9 ­ 2 0 1 0 A n n u A l R E p o R t #12;2 science to medicine Albert Einstein College of Medicine is at the forefront-researcher divide 52 Our Supporters 58 On the COver: Left, naomi Maria assists in the einstein laboratory of John S

  6. 2011 The NEED Project P.O. Box 10101, Manassas, VA 20108 1.800.875.5029 www.NEED.org 43 How a Photovoltaic CellWorks

    E-Print Network [OSTI]

    Oregon, University of

    © 2011 The NEED Project P.O. Box 10101, Manassas, VA 20108 1.800.875.5029 www.NEED.org 43 How is very thinly diffused with an"n"dopant such as phosphorous. On the base of the slab a small amount of a"p a tendency to attract electrons. The base of the silicon is called p-type silicon (p = positive). The p

  7. Royal SwediSh academy of engineeRing ScienceS (iVa) a TRibuTe To The memoRy of

    E-Print Network [OSTI]

    Ponce, V. Miguel

    Royal SwediSh academy of engineeRing ScienceS (iVa) a TRibuTe To The memoRy of SVanTe a; A TribuTe To The MeMory of PresenTed AT The 2008 AnnuAl MeeTing of The royAl swedish AcAdeMy; The Royal Swedish Academy of Engineering Sciences (IVA) is an independent, learned society that promotes

  8. Understanding Building Energy Codes and Standards

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Shankle, Diana L.

    2003-03-01T23:59:59.000Z

    Energy codes and standards play a vital role by setting minimum requirements for energy-efficient design and construction. They outline uniform requirements for new buildings as well as additions and renovations. The Difference Between Energy Codes, Energy Standards and the Model Energy Code Energy codes--specify how buildings must be constructed or perform, and are written in mandatory, enforceable language. States or local governments adopt and enforce energy codes for their jurisdictions. Energy standards--describe how buildings should be constructed to save energy cost-effectively. They are published by national organizations such as the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). They are not mandatory, but serve as national recommendations, with some variation for regional climate. States and local governments frequently use energy standards as the technical basis for developing their energy codes. Some energy standards are written in mandatory, enforceable language, making it easy for jurisdictions to incorporate the provisions of the energy standards directly into their laws or regulations.

  9. Representation of State Property Systems

    E-Print Network [OSTI]

    Diederik Aerts; Sylvia Pulmannova

    2008-11-15T23:59:59.000Z

    A 'state property system' is the mathematical structure which models an arbitrary physical system by means of its set of states, its set of properties, and a relation of 'actuality of a certain property for a certain state'. We work out a new axiomatization for standard quantum mechanics, starting with the basic notion of state property system, and making use of a generalization of the standard quantum mechanical notion of 'superposition' for state property systems.

  10. NIST Standards in Trade Workshops Increase

    E-Print Network [OSTI]

    codes to renewable energy and lighting, and much more. SIT workshops are designed to introduce U Available to Government Agencies NIST offers interactive workshops for federal, state, and local government agencies on the fundamentals of standards, conformity assessment, and related topics. Each workshop

  11. Tracking Grantee Portal Standards and Recommendations Standards and Recommendations Table

    E-Print Network [OSTI]

    Tracking Grantee Portal Standards and Recommendations April 2009 Standards and Recommendations Table Tracking Network Standards Provide both public and secure grantee portals. Provide a link on a grantee's portal. Organize contents of pages to facilitate the identification of detailed information

  12. Department of Energy Standards Index

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  13. Standard Test Method for Sandwich Corrosion Test

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  14. Status and Value of International Standards for Nuclear Criticality Safety

    SciTech Connect (OSTI)

    Hopper, Calvin Mitchell [ORNL] [ORNL

    2011-01-01T23:59:59.000Z

    This presentation provides an update to the author's standards report provided at the ICNC-2007 meeting. It includes a discussion about the difference between, and the value of participating in, the development of international 'consensus' standards as opposed to nonconsensus standards. Standards are developed for a myriad of reasons. Generally, standards represent an agreed upon, repeatable way of doing something as defined by an individual or group of people. They come in various types. Examples include personal, family, business, industrial, commercial, and regulatory such as military, community, state, federal, and international standards. Typically, national and international 'consensus' standards are developed by individuals and organizations of diverse backgrounds representing the subject matter users and developers of a service or product and other interested parties or organizations. Within the International Organization for Standardization (ISO), Technical Committee 85 (TC85) on nuclear energy, Subcommittee 5 (SC5) on nuclear fuel technology, there is a Working Group 8 (WG8) on standardization of calculations, procedures, and practices related to criticality safety. WG8 has developed, and is developing, ISO standards within the category of nuclear criticality safety of fissionable materials outside of reactors (i.e., nonreactor fissionable material nuclear fuel cycle facilities). Since the presentation of the ICNC-2007 report, WG8 has issued three new finalized international standards and is developing two more new standards. Nearly all elements of the published WG8 ISO standards have been incorporated into IAEA nonconsensus guides and standards. The progression of consensus standards development among international partners in a collegial environment establishes a synergy of different concepts that broadens the perspectives of the members. This breadth of perspectives benefits the working group members in their considerations of consensus standards developments in their own countries. A testament to the value of the international standards efforts is that nearly all elements of the published WG8 ISO standards have been incorporated into IAEA nonconsensus guides and standards and are mainly consistent with international ISO member domestic standards.

  15. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    In October 2008, Michigan enacted the Clean, Renewable, and Efficient Energy Act, Public Act 295, requiring the state's investor-owned utilities, alternative retail suppliers, electric cooperativ...

  16. Water Quality Standards (Ohio)

    Broader source: Energy.gov [DOE]

    This chapter of the law that establishes the Ohio Environmental Protection Agency outlines the minimum water quality requirements for all surface waters of the state.

  17. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    Maine's original Renewable Resource Portfolio Requirement was passed as part of the state's 1997 electric-utility restructuring law. In 1999, Maine's Public Utility Commission (PUC) adopted rules...

  18. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  19. Infiltration in ASHRAE's Residential Ventilation Standards

    SciTech Connect (OSTI)

    Sherman, Max

    2008-10-01T23:59:59.000Z

    The purpose of ventilation is to dilute or remove indoor contaminants that an occupant could be exposed to. It can be provided by mechanical or natural means. ASHRAE Standards including standards 62, 119, and 136 have all considered the contribution of infiltration in various ways, using methods and data from 20 years ago. The vast majority of homes in the United States and indeed the world are ventilated through natural means such as infiltration caused by air leakage. Newer homes in the western world are tight and require mechanical ventilation. As we seek to provide acceptable indoor air quality at minimum energy cost, it is important to neither over-ventilate norunder-ventilate. Thus, it becomes critically important to correctly evaluate the contribution infiltration makes to both energy consumption and equivalent ventilation. ASHRAE Standard 62.2 specifies how much mechanical ventilation is considered necessary to provide acceptable indoor air quality, but that standard is weak on how infiltration can contribute towards meeting the total requirement. In the past ASHRAE Standard 136 was used to do this, but new theoretical approaches and expanded weather data have made that standard out of date. This article will describe how to properly treat infiltration as an equivalent ventilation approach and then use new data and these new approaches to demonstrate how these calculations might be done both in general and to update Standard 136.

  20. Charmless Hadronic B Decays into Vector, Axial Vector and Tensor Final States at BaBar

    SciTech Connect (OSTI)

    Gandini, Paolo; /Milan U. /INFN, Milan

    2012-04-06T23:59:59.000Z

    We present experimental measurements of branching fraction and longitudinal polarization fraction in charmless hadronic B decays into vector, axial vector and tensor final states with the final dataset of BABAR. Measurements of such kind of decays are a powerful tool both to test the Standard Model and search possible sources of new physics. In this document we present a short review of the last experimental results at BABAR concerning charmless quasi two-body decays in final states containing particles with spin 1 or spin 2 and different parities. This kind of decays has received considerable theoretical interest in the last few years and this particular attention has led to interesting experimental results at the current b-factories. In fact, the study of longitudinal polarization fraction f{sub L} in charmless B decays to vector vector (VV), vector axial-vector (VA) and axial-vector axial-vector (AA) mesons provides information on the underlying helicity structure of the decay mechanism. Naive helicity conservation arguments predict a dominant longitudinal polarization fraction f{sub L} {approx} 1 for both tree and penguin dominated decays and this pattern seems to be confirmed by tree-dominated B {yields} {rho}{rho} and B{sup +} {yields} {Omega}{rho}{sup +} decays. Other penguin dominated decays, instead, show a different behavior: the measured value of f{sub L} {approx} 0.5 in B {yields} {phi}K* decays is in contrast with naive Standard Model (SM) calculations. Several solutions have been proposed such as the introduction of non-factorizable terms and penguin-annihilation amplitudes, while other explanations invoke new physics. New modes have been investigated to shed more light on the problem.

  1. Maintaining Standards: Differences between the Standard Deviation and Standard Error, and

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Maintaining Standards: Differences between the Standard Deviation and Standard Error, and When to Use Each David L Streiner, PhD1 Many people confuse the standard deviation (SD) and the standard error of the mean (SE) and are unsure which, if either, to use in presenting data in graphical or tabular form

  2. Standard Nine: Financial Resources

    E-Print Network [OSTI]

    Snider, Barry B.

    105 Standard Nine: Financial Resources Overview The 1996 NEASC team report was critical of Brandeis's financial management, and focused on the need to increase financial resources, improve faculty and staff displays the University resource profile for FY1995 compared to the FY2005 profile. During this decade

  3. FACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES

    E-Print Network [OSTI]

    Laughlin, Robert B.

    to the repair of hydraulic turbine runners and large pump impellers. Reclamation operates and maintains a wideFACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES VOLUME 2-5 TURBINE REPAIR Internet Version variety of reaction and impulse turbines as well as axial flow, mixed flow, radial flow pumps and pump

  4. DOE standard: Radiological control

    SciTech Connect (OSTI)

    Not Available

    1999-07-01T23:59:59.000Z

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  5. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  6. Appliance and Equipment Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  7. Active Technical Standards Managers List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC CODE AU-30 Jeff D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy...

  8. UCIT Data Network Standards Campus Wireless Network Standard

    E-Print Network [OSTI]

    Habib, Ayman

    UCIT Data Network Standards Campus Wireless Network Standard Classification IT Infrastructure Table.1. Standardization of the U of C's 802.11 wireless networks and frequency bands is required to insure availability of the wireless network to the campus community. Standards of use will improve the wireless service and help

  9. ZERH Training: Harrisonburg, VA

    Broader source: Energy.gov [DOE]

    This 3.5-hour training provides builders with a comprehensive review of zero energy-ready home construction including the business case, detailed specifications, and opportunities to be recognized...

  10. Advanced Battery Manufacturing (VA)

    SciTech Connect (OSTI)

    Stratton, Jeremy

    2012-09-30T23:59:59.000Z

    LiFeBATT has concentrated its recent testing and evaluation on the safety of its batteries. There appears to be a good margin of safety with respect to overheating of the cells and the cases being utilized for the batteries are specifically designed to dissipate any heat built up during charging. This aspect of LiFeBATT’s products will be even more fully investigated, and assuming ongoing positive results, it will become a major component of marketing efforts for the batteries. LiFeBATT has continued to receive prismatic 20 Amp hour cells from Taiwan. Further testing continues to indicate significant advantages over the previously available 15 Ah cells. Battery packs are being assembled with battery management systems in the Danville facility. Comprehensive tests are underway at Sandia National Laboratory to provide further documentation of the advantages of these 20 Ah cells. The company is pursuing its work with Hybrid Vehicles of Danville to critically evaluate the 20 Ah cells in a hybrid, armored vehicle being developed for military and security applications. Results have been even more encouraging than they were initially. LiFeBATT is expanding its work with several OEM customers to build a worldwide distribution network. These customers include a major automotive consulting group in the U.K., an Australian maker of luxury off-road campers, and a number of makers of E-bikes and scooters. LiFeBATT continues to explore the possibility of working with nations that are woefully short of infrastructure. Negotiations are underway with Siemens to jointly develop a system for using photovoltaic generation and battery storage to supply electricity to communities that are not currently served adequately. The IDA has continued to monitor the progress of LiFeBATT’s work to ensure that all funds are being expended wisely and that matching funds will be generated as promised. The company has also remained current on all obligations for repayment of an IDA loan and lease payments for space to the IDA. A commercial venture is being formed to utilize the LiFeBATT product for consumer use in enabling photovoltaic powered boat lifts. Field tests of the system have proven to be very effective and commercially promising. This venture is expected to result in significant sales within the next six months.

  11. Mo#va#on

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville PowerCherries 82981-1cnHighandSWPA / SPRA /Ml'. William Hirst Hirst Enterprises, Inc. P.O. Box= a

  12. California Greenhouse Gas Emissions Standards for Light-Duty Vehicles (Update) (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    The state of California was given authority under the Clean Air Act Amendments of 1990 (CAAA90) to set emissions standards for light-duty vehicles that exceed federal standards. In addition, other states that do not comply with the National Ambient Air Quality Standards (NAAQS) set by the Environmental Protection Agency under CAAA90 were given the option to adopt Californias light-duty vehicle emissions standards in order to achieve air quality compliance. CAAA90 specifically identifies hydrocarbon, carbon monoxide, and NOx as vehicle-related air pollutants that can be regulated. California has led the nation in developing stricter vehicle emissions standards, and other states have adopted the California standards.

  13. Standardized radiological dose evaluations

    SciTech Connect (OSTI)

    Peterson, V.L.; Stahlnecker, E.

    1996-05-01T23:59:59.000Z

    Following the end of the Cold War, the mission of Rocky Flats Environmental Technology Site changed from production of nuclear weapons to cleanup. Authorization baseis documents for the facilities, primarily the Final Safety Analysis Reports, are being replaced with new ones in which accident scenarios are sorted into coarse bins of consequence and frequency, similar to the approach of DOE-STD-3011-94. Because this binning does not require high precision, a standardized approach for radiological dose evaluations is taken for all the facilities at the site. This is done through a standard calculation ``template`` for use by all safety analysts preparing the new documents. This report describes this template and its use.

  14. Energy Optimization Savings Standard

    Broader source: Energy.gov [DOE]

    Note: The Michigan Public Service Commission (MPSC) created a temporary order ([http://www.dleg.state.mi.us/mpsc/orders/electric/2008/u-15800_12-04-2008... U-15800]) in December of 2008 to address...

  15. Standard costs for labor

    E-Print Network [OSTI]

    Khan, Mohammed Nurul Absar

    1960-01-01T23:59:59.000Z

    STANDARD COSTS FOR LABOR A Thesis By MD. NURUL ABSAR KHAN Submitted to the Graduate School of the Agricultural and Mechanical College of Texms in partial fulfillment of the requirements for the degree of MASTER OF BUSINESS ADMINISTRATION... January 1960 Ma/or Sub)acts Accounting STANOAHD COSTS FOR LABOR ND, NURUL ABSAR KHAN Approved as t style and content bys Chairman of Committee Head of Hepartment January 1960 The author acknowledges his indebtedness to Mr. T. M. Leland, Mr. T. D...

  16. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01T23:59:59.000Z

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  17. Theoretical standards in x-ray spectroscopies

    SciTech Connect (OSTI)

    Not Available

    1992-01-01T23:59:59.000Z

    We propose to extend our state-of-the-art, ab initio XAFS (X-ray absorption fine structure) codes, FEFF. Our current work has been highly successful in achieving accurate, user-friendly XAFS standards, exceeding the performance of both tabulated standards and other codes by a considerable margin. We now propose to add the capability to treat more complex materials. This includes multiple-scattering, polarization dependence, an approximate treatment of XANES (x-ray absorption near edge structure), and other improvements. We also plan to adapt FEFF to other spectroscopies, e.g. photoelectron diffraction (PD) and diffraction anomalous fine structure (DAFS).

  18. TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE

    E-Print Network [OSTI]

    Boyer, Edmond

    ) developed by the International Standards Organization TC32 SC4, which is to serve as a basis for harmonizingChapter # TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE RESOURCES Nancy Ide and Laurent Romary-284" #12;2 Chapter # Language Engineering Standards (EAGLES) and the International Standard for Language

  19. Economic analysis of proposed voluntary energy conservation standard for new residential buildings

    SciTech Connect (OSTI)

    Marsh, S.J.; Roop, J.M.; Callaway, J.W.; Taylor, Z.T.

    1989-06-01T23:59:59.000Z

    The objective of this document is to present an analysis of the impacts of the proposed voluntary energy conservation standard for the construction of new residential buildings. This analysis examines the impacts of having the proposed residential standard apply immediately and, alternatively, having the proposed standard phased in over a five-year period. It does not address the question of whether realistically the standard would be adopted by states, nor does it weight the improbable impact of states with higher energy efficiency standards modifying their standard to comply with this voluntary standard. 19 refs., 1 fig., 12 tabs.

  20. Origin State Destination State

    Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

    5. Estimated rail transportation rates for coal, state to state, STB data Origin State Destination State 2001 2002 2003 2004 2005 2006 2007 2008 2009 2001-2009 2008-2009 Alabama...

  1. Origin State Destination State

    Gasoline and Diesel Fuel Update (EIA)

    6. Estimated rail transportation rates for coal, state to state, STB data Origin State Destination State 2001 2002 2003 2004 2005 2006 2007 2008 2009 2001-2009 2008-2009 Alabama...

  2. Energy Efficiency and Sustainable Construction Standards for Public Buildings

    Broader source: Energy.gov [DOE]

    Senate Bill 130 of 2008 established energy efficiency goals for new state building projects. All major facility projects over 10,000 square feet should strive to exceed the efficiency standards of...

  3. Running in place : renewal portfolio standards and climate change

    E-Print Network [OSTI]

    Hogan, Michael T. (Michael Thomas)

    2008-01-01T23:59:59.000Z

    Renewable portfolio standards ("RPS") have spread widely as states have made an effort to promote electricity production from renewable energy sources, granting privileged market access to eligible technologies and resources. ...

  4. Voting Systems Performance and Test Standards: An Overview

    E-Print Network [OSTI]

    Rivest, Ronald L.

    and implement performance and test Standards for electronic voting equipment is over 25 years old. However to submit their equipment to an Independent Test Authority (ITA) for evaluation against the Standards testing and qualification process. In addition, many systems have subsequently been certified at the state

  5. Beyond the Standard Model

    SciTech Connect (OSTI)

    Lykken, Joseph D.; /Fermilab

    2010-05-01T23:59:59.000Z

    'BSM physics' is a phrase used in several ways. It can refer to physical phenomena established experimentally but not accommodated by the Standard Model, in particular dark matter and neutrino oscillations (technically also anything that has to do with gravity, since gravity is not part of the Standard Model). 'Beyond the Standard Model' can also refer to possible deeper explanations of phenomena that are accommodated by the Standard Model but only with ad hoc parameterizations, such as Yukawa couplings and the strong CP angle. More generally, BSM can be taken to refer to any possible extension of the Standard Model, whether or not the extension solves any particular set of puzzles left unresolved in the SM. In this general sense one sees reference to the BSM 'theory space' of all possible SM extensions, this being a parameter space of coupling constants for new interactions, new charges or other quantum numbers, and parameters describing possible new degrees of freedom or new symmetries. Despite decades of model-building it seems unlikely that we have mapped out most of, or even the most interesting parts of, this theory space. Indeed we do not even know what is the dimensionality of this parameter space, or what fraction of it is already ruled out by experiment. Since Nature is only implementing at most one point in this BSM theory space (at least in our neighborhood of space and time), it might seem an impossible task to map back from a finite number of experimental discoveries and measurements to a unique BSM explanation. Fortunately for theorists the inevitable limitations of experiments themselves, in terms of resolutions, rates, and energy scales, means that in practice there are only a finite number of BSM model 'equivalence classes' competing at any given time to explain any given set of results. BSM phenomenology is a two-way street: not only do experimental results test or constrain BSM models, they also suggest - to those who get close enough to listen - new directions for BSM model building. Contrary to popular shorthand jargon, supersymmetry (SUSY) is not a BSM model: it is a symmetry principle characterizing a BSM framework with an infinite number of models. Indeed we do not even know the full dimensionality of the SUSY parameter space, since this presumably includes as-yet-unexplored SUSY-breaking mechanisms and combinations of SUSY with other BSM principles. The SUSY framework plays an important role in BSM physics partly because it includes examples of models that are 'complete' in the same sense as the Standard Model, i.e. in principle the model predicts consequences for any observable, from cosmology to b physics to precision electroweak data to LHC collisions. Complete models, in addition to being more explanatory and making connections between diverse phenomena, are also much more experimentally constrained than strawman scenarios that focus more narrowly. One sometimes hears: 'Anything that is discovered at the LHC will be called supersymmetry.' There is truth behind this joke in the sense that the SUSY framework incorporates a vast number of possible signatures accessible to TeV colliders. This is not to say that the SUSY framework is not testable, but we are warned that one should pay attention to other promising frameworks, and should be prepared to make experimental distinctions between them. Since there is no formal classification of BSM frameworks I have invented my own. At the highest level there are six parent frameworks: (1) Terascale supersymmetry; (2) PNGB Higgs; (3) New strong dynamics; (4) Warped extra dimensions; (5) Flat extra dimensions; and (6) Hidden valleys. Here is the briefest possible survey of each framework, with the basic idea, the generic new phenomena, and the energy regime over which the framework purports to make comprehensive predictions.

  6. Standards | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's NuclearSpurring Solar Installations inforStandards

  7. Mechanical Systems Qualification Standard

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport(FactDepartment3311, 3312), October 20122Technologies61-2008 June 2008 DOE STANDARD

  8. Standards in Genomic Science: An Open-Access Journal of the Genomic Standards Consortium (GSC8 Meeting)

    ScienceCinema (OSTI)

    Garrity, George

    2011-06-03T23:59:59.000Z

    George Garrity of Michigan State University talks about the GSC's open-access journal SIGS at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009.

  9. Standards in Genomic Science: An Open-Access Journal of the Genomic Standards Consortium (GSC8 Meeting)

    SciTech Connect (OSTI)

    Garrity, George

    2009-09-09T23:59:59.000Z

    George Garrity of Michigan State University talks about the GSC's open-access journal SIGS at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 9, 2009.

  10. A derivative standard for polarimeter calibration

    SciTech Connect (OSTI)

    Mulhollan, G.; Clendenin, J.; Saez, P. [and others

    1996-10-01T23:59:59.000Z

    A long-standing problem in polarized electron physics is the lack of a traceable standard for calibrating electron spin polarimeters. While several polarimeters are absolutely calibrated to better than 2%, the typical instrument has an inherent accuracy no better than 10%. This variability among polarimeters makes it difficult to compare advances in polarized electron sources between laboratories. The authors have undertaken an effort to establish 100 nm thick molecular beam epitaxy grown GaAs(110) as a material which may be used as a derivative standard for calibrating systems possessing a solid state polarized electron source. The near-bandgap spin polarization of photoelectrons emitted from this material has been characterized for a variety of conditions and several laboratories which possess well calibrated polarimeters have measured the photoelectron polarization of cathodes cut from a common wafer. Despite instrumentation differences, the spread in the measurements is sufficiently small that this material may be used as a derivative calibration standard.

  11. A history of the Building Energy Standards Program

    SciTech Connect (OSTI)

    Shankle, D.L.; Merrick, J.A.; Gilbride, T.L.

    1994-02-01T23:59:59.000Z

    This report describes the history of the Pacific Northwest Laboratory`s (PNL`s) work in development of energy standards for commercial and residential construction in the United States. PNL`s standards development efforts are concentrated in the Building Energy Standards Program (the Program), which PNL conducts for the U.S. Department of Energy (DOE) Office of Codes and Standards. The Program has worked with DOE, the American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc. (ASHRAE), and other building codes and standards organizations to develop, evaluate, and promulgate energy standards in all sectors of the building industry. This report describes the recent history of U.S. code development and PNL`s contributions through the 1980s and early 1990s, up to the passage of the Energy Policy Act of 1992. Impacts to standards development resulting from the passage of this act will be described in other reports.

  12. Standard-E hydrogen monitoring system field acceptance testprocedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-02-01T23:59:59.000Z

    The purpose of this document is to demonstrate that the Standard-E Hydrogen Monitoring Systems (SHMS-E) installed on the Waste Tank Farms in the Hanford 200 Areas are constructed as intended by the design.

  13. VA VT CT RI MT WY CO ID UT OR NV CA AZ NM WA TN WV NC AR OK

    Broader source: Energy.gov (indexed) [DOE]

    2 1 Locations of Smart Grid Demonstration and Large-Scale Energy Storage Projects NH 32 Awards Support Projects in 24 States 6 11 MA...

  14. Accounting standards for the Dominican Republic

    E-Print Network [OSTI]

    Reyes-Lugo, Ramon

    1972-01-01T23:59:59.000Z

    language is Spanish. The majority of the popula- tion is Roman Catholic; however, there is religious freedom. The monetary unit is the Dominican Republic peso oro (RDS), the official rate of exchange of which is equivalent to one U. S. dollar. i... States. The standards and principles of accounting have been translated into Spanish from U. S. textbooks (R. Kester, Finney and Miller, etc. ). In a survey 21 conducted by the author, even the most recently published APB- Opinions were found in use...

  15. Energy standards and model codes development, adoption, implementation, and enforcement

    SciTech Connect (OSTI)

    Conover, D.R.

    1994-08-01T23:59:59.000Z

    This report provides an overview of the energy standards and model codes process for the voluntary sector within the United States. The report was prepared by Pacific Northwest Laboratory (PNL) for the Building Energy Standards Program and is intended to be used as a primer or reference on this process. Building standards and model codes that address energy have been developed by organizations in the voluntary sector since the early 1970s. These standards and model codes provide minimum energy-efficient design and construction requirements for new buildings and, in some instances, existing buildings. The first step in the process is developing new or revising existing standards or codes. There are two overall differences between standards and codes. Energy standards are developed by a consensus process and are revised as needed. Model codes are revised on a regular annual cycle through a public hearing process. In addition to these overall differences, the specific steps in developing/revising energy standards differ from model codes. These energy standards or model codes are then available for adoption by states and local governments. Typically, energy standards are adopted by or adopted into model codes. Model codes are in turn adopted by states through either legislation or regulation. Enforcement is essential to the implementation of energy standards and model codes. Low-rise residential construction is generally evaluated for compliance at the local level, whereas state agencies tend to be more involved with other types of buildings. Low-rise residential buildings also may be more easily evaluated for compliance because the governing requirements tend to be less complex than for commercial buildings.

  16. RVS Bielefeld White Paper 1 Standards for Standards

    E-Print Network [OSTI]

    Ladkin, Peter B.

    in their work and business. Comment on Principle 1: Currently, IEC 61508 in its IEC version is prohibitively of the European and ISO/IEC standards are covered by this; however, if one wants the English originals, this does and includes all IEC standards. However, a certain amount of time and effort is required to use a standard

  17. Non standard neutrino interactions

    E-Print Network [OSTI]

    Miranda, O G

    2015-01-01T23:59:59.000Z

    Neutrino oscillations have become well-known phenomenon; the measurements of neutrino mixing angles and mass squared differences are continuously improving. Future oscillation experiments will eventually determine the remaining unknown neutrino parameters, namely, the mass ordering, normal or inverted, and the CP-violating phase. On the other hand, the absolute mass scale of neutrinos could be probed by cosmological observations, single beta decay as well as by neutrinoless double beta decay experiments. Furthermore, the last one may shed light on the nature of neutrinos, Dirac or Majorana, by measuring the effective Majorana mass of neutrinos. However, the neutrino mass generation mechanism remains unknown. A well-motivated phenomenological approach to search for new physics, in the neutrino sector, is that of non-standard interactions. In this short review, the current constraints in this picture, as well as the perspectives from future experiments, are discussed.

  18. Environmental Public Health Performance Standards

    E-Print Network [OSTI]

    Environmental Public Health Performance Standards Environmental Health Program Self Agency: Total Environmental Health Program Budget: #12;Environmental Public Health Performance Standards (v. 2.0); Environmental Health Program Assessment Instrument, 1/7/2010 Page 2 Proportion

  19. Tritium beta decay, neutrino mass matrices, and interactions beyond the standard model

    SciTech Connect (OSTI)

    Stephenson, G. J.; Goldman, T.; McKellar, B. H. J.

    2000-11-01T23:59:59.000Z

    The interference of charge changing interactions, weaker than the V-A standard model (SM) interaction and having a different Lorentz structure, with that SM interaction, can, in principle, produce effects near the end point of the tritium beta decay spectrum which are of a different character from those produced by the purely kinematic effect of neutrino mass expected in the simplest extension of the SM. We show that the existence of more than one mass eigenstate can lead to interference effects at the end point that are stronger than those occurring over the entire spectrum. We discuss these effects both for the special case of Dirac neutrinos and the more general case of Majorana neutrinos and show that, for the present precision of the experiments, one formula should suffice to express the interference effects in all cases. Implications for ''sterile'' neutrinos are noted.

  20. Field Theory and Standard Model

    E-Print Network [OSTI]

    W. Buchmüller; C. Lüdeling

    2006-09-18T23:59:59.000Z

    This is a short introduction to the Standard Model and the underlying concepts of quantum field theory.

  1. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  2. The Question The Standard Construction

    E-Print Network [OSTI]

    Raghavan, Dilip

    The Question The Standard Construction The ZFC construction Bibliography Solution to a Problem Construction The ZFC construction Bibliography Outline 1 The Question 2 The Standard Construction 3 The ZFC construction Dilip Raghavan Solution to a Problem of Van Douwen #12;The Question The Standard Construction

  3. 2008 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    2008 BUILDING ENERGY EFFICIENCY STANDARDS C A L I F O R N I A E N E RGY CO M M I S S I O N Buildings and Appliances Office #12;Acknowledgments The Building Energy Efficiency Standards (Standards and consultants. Valerie Hall, Deputy Director of the Energy Efficiency and Renewable Division provided policy

  4. Environmental Public Health Performance Standards

    E-Print Network [OSTI]

    Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 National Center for Environmental Health Division of Emergency and Environmental Health Services #12;#12;Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 #12;Environmental Public Health Performance Standards

  5. Automated saturated standard cell intercomparison

    SciTech Connect (OSTI)

    Bell, B.E.; Deitesfeld, C.A. (ed.) ed.

    1987-10-05T23:59:59.000Z

    A cost effective, highly efficient, and automatic method of intercomparing standard cells has been sought after and implemented, utilizing computer control and a commercially available scanner. This system reduces intercomparison time from 4 hours to 30 minutes using the standard National Bureau of Standard (NBS) 4 x 4 design. 7 figs., 1 tab.

  6. Energy Codes and Standards: Facilities

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Shankle, Diana L.

    2007-01-01T23:59:59.000Z

    Energy codes and standards play a vital role in the marketplace by setting minimum requirements for energy-efficient design and construction. They outline uniform requirements for new buildings as well as additions and renovations. This article covers basic knowledge of codes and standards; development processes of each; adoption, implementation, and enforcement of energy codes and standards; and voluntary energy efficiency programs.

  7. TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE

    E-Print Network [OSTI]

    Ide, Nancy

    ) developed by the International Standards Organization TC32 SC4, which is to serve as a basis for harmonizing. It is in this context that a committee of the International Standards Organization (ISO), TC 37/SC 4Chapter # TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE RESOURCES Nancy Ide and Laurent Romary

  8. Nonlinear Diffusions and Stable-Like Processes with Coefficients Depending on the Median or VaR

    SciTech Connect (OSTI)

    Kolokoltsov, Vassili N., E-mail: v.kolokoltsov@warwick.ac.uk [University of Warwick, Department of Statistics (United Kingdom)

    2013-08-01T23:59:59.000Z

    The paper is devoted to the well-posedness for nonlinear McKean-Vlasov type diffusions with coefficients depending on the median or, more generally, on the {alpha}-quantile of the underlying distribution. The median is not a continuous function on the space of probability measures equipped with the weak convergence. This is one reason why well-posedness of the SDE considered in the paper does not follow by standard arguments.

  9. ARM Standards Policy Committee Report

    SciTech Connect (OSTI)

    Cialella, A; Jensen, M; Koontz, A; McFarlane, S; McCoy, R; Monroe, J; Palanisamy, G; Perez, R; Sivaraman, C

    2012-09-19T23:59:59.000Z

    Data and metadata standards promote the consistent recording of information and are necessary to ensure the stability and high quality of Atmospheric Radiation Measurement (ARM) Climate Research Facility data products for scientific users. Standards also enable automated routines to be developed to examine data, which leads to more efficient operations and assessment of data quality. Although ARM Infrastructure agrees on the utility of data and metadata standards, there is significant confusion over the existing standards and the process for allowing the release of new data products with exceptions to the standards. The ARM Standards Policy Committee was initiated in March 2012 to develop a set of policies and best practices for ARM data and metadata standards.

  10. Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global Standards Officer, EMC

    E-Print Network [OSTI]

    Standards Officer, EMC Corporation, Office of the CTO Steve Diamond has 30 years of management, marketing was President of the IEEE Computer Society. Steve is General Manager of the Industry Standards Office at EMC Corporation, and Global Standards Officer in the Office of the CTO. Before EMC, he was responsible for cloud

  11. USE OF VOLUNTARY CONSENSUS STANDARDS AND INTERACTION WITH STANDARDS...

    Energy Savers [EERE]

    DEVELOPMENT ORGANIZATIONS Purpose This procedure identifies the process by which DOE adopts Voluntary Consensus Standards (VCSs) and provides guidance for the interaction...

  12. National Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

    SciTech Connect (OSTI)

    Thornton, Brian; Halverson, Mark A.; Myer, Michael; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

    2013-11-30T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

  13. Cost-effectiveness of ASHRAE Standard 90.1-2010 Compared to ASHRAE Standard 90.1-2007

    SciTech Connect (OSTI)

    Thornton, Brian A.; Halverson, Mark A.; Myer, Michael; Cho, Hee Jin; Loper, Susan A.; Richman, Eric E.; Elliott, Douglas B.; Mendon, Vrushali V.; Rosenberg, Michael I.

    2013-06-18T23:59:59.000Z

    Pacific Northwest National Laboratory (PNNL) completed this project for the U.S. Department of Energy’s (DOE’s) Building Energy Codes Program (BECP). DOE’s BECP supports upgrading building energy codes and standards, and the states’ adoption, implementation, and enforcement of upgraded codes and standards. Building energy codes and standards set minimum requirements for energy-efficient design and construction for new and renovated buildings, and impact energy use and greenhouse gas emissions for the life of buildings. Continuous improvement of building energy efficiency is achieved by periodically upgrading energy codes and standards. Ensuring that changes in the code that may alter costs (for building components, initial purchase and installation, replacement, maintenance and energy) are cost-effective encourages their acceptance and implementation. ANSI/ASHRAE/IESNA Standard 90.1 is the energy standard for commercial and multi-family residential buildings over three floors.

  14. Canada-United States Regulatory Cooperation Council Webinar:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Canada-United States Regulatory Cooperation Council Webinar: Proposed Approach for Energy Efficiency Standards Canada-United States Regulatory Cooperation Council Webinar: Proposed...

  15. Surface Water Quality Standards (Kansas)

    Broader source: Energy.gov [DOE]

    This act states regulations for the quality of surface water in the state. It also states designated uses of classified surface waters, surface water quality criteria and an antidegradation policy...

  16. web identity standards introduction .............................................................................................................87

    E-Print Network [OSTI]

    Mullins, Dyche

    web identity standards sectionten 86 contents introduction............................................................................................................... 89-90 tagline and the web .................................................................................................91 tagline and the web: improper use

  17. Emission Standards for Contaminants (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations list emissions standards for various contaminants, and contain special requirements for anaerobic lagoons. These regulations also describe alternative emissions limits, which may...

  18. Surface Water Quality Standards (Nebraska)

    Broader source: Energy.gov [DOE]

    These regulations, promulgated by the Department of Environmental Quality, contain surface water quality standards, stream classifications, discussion of lakes and impounded basins, and water...

  19. The Standards Forum, June 2001

    Broader source: Energy.gov (indexed) [DOE]

    technical standards then be- ing developed and used by DOE often lacked a consis- tent, high quality technical and administrative basis and were often marginally needed. Initiation...

  20. Effluent and Pretreatment Standards (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations describe prohibited discharges into surface water and groundwater systems and set effluent standards for secondary treatment facilities. Effluent limitations and pretreatment...

  1. Interconnection Standards for Small Generators

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission (FERC) adopted "small generator" interconnection standards for distributed energy resources up to 20 megawatts (MW) in capacity in May 2005.* The FERC's...

  2. The Standards Forum, December 1999

    Broader source: Energy.gov (indexed) [DOE]

    Guide for Specifying and Selecting Power, Control and Special Purpose Cable for Petroleum and Chemical Plants (new standard) - October 26, 1999. ANSINFPA 11A-1998,...

  3. International Quality Assurance Standards (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

    2011-02-01T23:59:59.000Z

    Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

  4. Standard-E hydrogen monitoring system shop acceptance test procedure

    SciTech Connect (OSTI)

    Schneider, T.C.

    1997-10-02T23:59:59.000Z

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  5. Standard and non standard ideas for the Higgs boson sector

    E-Print Network [OSTI]

    Abbondandolo, Alberto

    Standard and non standard ideas for the Higgs boson sector Riccardo Barbieri Johns Hopkins Workshop as the Higgs boson is in their low-energy spectrum We only know of approximate symmetries that can explain synoptic table Supersymmetric The SM Higgs boson TC-like Minimally extended Higgsless "Composite" 5

  6. 1.) Rivanna Snapshot Open House December 7, 2012 LOCATION CORRECTION: CitySpace (on the Downtown Mall), Charlottesville, VA

    E-Print Network [OSTI]

    Virginia Tech

    of watershed management tools and plans designed to be utilized by its member local governments and Soil Water for Sustainability for Water and Wastewater Utilities ­ December 13, 2012 9.) EPA Grant Opportunities to Assist State Septic Programs in Managing Water Quality Impacts in the Chesapeake Bay Watershed ­ Comment

  7. Beyond the Cosmological Standard Model

    E-Print Network [OSTI]

    Austin Joyce; Bhuvnesh Jain; Justin Khoury; Mark Trodden

    2014-12-15T23:59:59.000Z

    After a decade and a half of research motivated by the accelerating universe, theory and experiment have a reached a certain level of maturity. The development of theoretical models beyond \\Lambda, or smooth dark energy, often called modified gravity, has led to broader insights into a path forward, and a host of observational and experimental tests have been developed. In this review we present the current state of the field and describe a framework for anticipating developments in the next decade. We identify the guiding principles for rigorous and consistent modifications of the standard model, and discuss the prospects for empirical tests. We begin by reviewing attempts to consistently modify Einstein gravity in the infrared, focusing on the notion that additional degrees of freedom introduced by the modification must screen themselves from local tests of gravity. We categorize screening mechanisms into three broad classes: mechanisms which become active in regions of high Newtonian potential, those in which first derivatives become important, and those for which second derivatives are important. Examples of the first class, such as f(R) gravity, employ the familiar chameleon or symmetron mechanisms, whereas examples of the last class are galileon and massive gravity theories, employing the Vainshtein mechanism. In each case, we describe the theories as effective theories. We describe experimental tests, summarizing laboratory and solar system tests and describing in some detail astrophysical and cosmological tests. We discuss future tests which will be sensitive to different signatures of new physics in the gravitational sector. Parts that are more relevant to theorists vs. observers/experimentalists are clearly indicated, in the hope that this will serve as a useful reference for both audiences, as well as helping those interested in bridging the gap between them.

  8. Development of an ASTM standard guide on performing vulnerability assessments for nuclear facilities

    SciTech Connect (OSTI)

    Wilkey, D.D.

    1995-09-01T23:59:59.000Z

    This paper describes an effort undertaken by subcommittee C26.12 (Safeguards) of the American Society for Testing and Materials (ASTM) to develop a standard guide for performing vulnerability assessments (VAs). VAs are performed to determine the effectiveness of safeguards and security systems for both domestic and international nuclear facilities. These assessments address a range of threats, including theft of nuclear material and sabotage, and use an array of methods. The approach to performing and documenting VAs is varied and is largely dependent upon the tools used to perform them. This diversity can lead to tools being misused, making validation of VAs more difficult. The development of a standard guide for performing VAs would, if generally accepted, alleviate these concerns. ASTM provides a forum for developing guides that includes a high level of peer review to assure that the result is acceptable to all potential users. Additionally, the ASTM is widely recognized for setting standards, and endorsement by the Society may increase the likelihood of acceptance by the nuclear community. The goal of this work is to develop a guide that is independent of the tools being used to perform the VA and applicable to the spectrum of threats described above.

  9. HIGH VOLTAGE TERMINAL IN COSY ELECTRON COOLER V.A. Chekavinskiy, E.A. Bekhtenev, I.A. Gusev, M.N. Kondaurov, V.R. Kozak, E.A. Kuper, V.R.

    E-Print Network [OSTI]

    Kozak, Victor R.

    HIGH VOLTAGE TERMINAL IN COSY ELECTRON COOLER V.A. Chekavinskiy, E.A. Bekhtenev, I.A. Gusev, M acceleration system ­ high voltage terminal. All power and control electronics were placed in a single isolated Voltage Terminal (HVT) in electron cooler is intended for generating of electron cooling beam

  10. Proceedings of the International Conference on Lasers `95, eds. V.J. Corcoran and T.A. Goldman, STS Press, McLean VA, 1996, pp. 225-231. OPTIMIZING HIGH PRESSURE CHEMICAL OXYGEN-IODINE LASERS

    E-Print Network [OSTI]

    Carroll, David L.

    Press, McLean VA, 1996, pp. 225-231. OPTIMIZING HIGH PRESSURE CHEMICAL OXYGEN-IODINE LASERS David L laser model was baselined to existing oxygen-iodine research assessment and device improvement chemical(1) generator. It may be possible to improve high pressure RADICL performance by increasing the number of large

  11. Proceedings of the International Conference on Lasers 2000, eds. V.J. Corcoran and T.A. Corcoran, STS Press, McLean VA, 2001, pp. 265-272.

    E-Print Network [OSTI]

    Carroll, David L.

    oxygen-iodine laser (COIL) singlet oxygen generator (SOG) based on discharge excitation of molecular/2). Historically, this pumping reaction has been fed by a liquid chemistry singlet oxygen generator (SOG, STS Press, McLean VA, 2001, pp. 265-272. 265 ElectriCOIL: Preliminary Experiments of Excited Oxygen

  12. Qualifying RPS State Export Markets (Mississippi)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Mississippi as eligible sources towards their RPS targets or goals. For specific...

  13. Qualifying RPS State Export Markets (Maine)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Maine as eligible sources towards their RPS targets or goals. For specific...

  14. Qualifying RPS State Export Markets (Montana)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Montana as eligible sources towards their RPS targets or goals. For specific...

  15. Qualifying RPS State Export Markets (Minnesota)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Minnesota as eligible sources towards their RPS targets or goals. For specific...

  16. Qualifying RPS State Export Markets (Nebraska)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Nebraska as eligible sources towards their RPS targets or goals. For specific...

  17. Qualifying RPS State Export Markets (Georgia)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Georgia as eligible sources towards their RPS targets or goals. For specific...

  18. Qualifying RPS State Export Markets (Alabama)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Alabama as eligible sources towards their RPS targets or goals. For specific...

  19. Qualifying RPS State Export Markets (Connecticut)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Connecticut as eligible sources towards their RPS targets or goals. For specific...

  20. Qualifying RPS State Export Markets (Arkansas)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Arkansas as eligible sources towards their RPS targets or goals. For specific...

  1. Qualifying RPS State Export Markets (Oklahoma)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Oklahoma as eligible sources towards their RPS targets or goals. For specific...

  2. Qualifying RPS State Export Markets (Indiana)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Indiana as eligible sources towards their RPS targets or goals. For specific...

  3. Qualifying RPS State Export Markets (Illinois)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Illinois as eligible sources towards their RPS targets or goals. For specific...

  4. Qualifying RPS State Export Markets (Delaware)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Delaware as eligible sources towards their RPS targets or goals. For specific...

  5. Qualifying RPS State Export Markets (Maryland)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Maryland as eligible sources towards their RPS targets or goals. For specific...

  6. Qualifying RPS State Export Markets (Missouri)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Missouri as eligible sources towards their RPS targets or goals. For specific...

  7. Qualifying RPS State Export Markets (Louisiana)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Louisiana as eligible sources towards their RPS targets or goals. For specific...

  8. Qualifying RPS State Export Markets (Pennsylvania)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Pennsylvania as eligible sources towards their RPS targets or goals. For specific...

  9. Qualifying RPS State Export Markets (Kentucky)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Kentucky as eligible sources towards their RPS targets or goals. For specific...

  10. Qualifying RPS Market States (Saskatchewan, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in Saskatchewan, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

  11. Qualifying RPS Market States (Ontario, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in Ontario, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

  12. Qualifying RPS Market States (Manitoba, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in Manitoba, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

  13. Qualifying RPS Market States (Quebec, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in Quebec, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...

  14. United States Geological Survey Geospatial Information Response

    E-Print Network [OSTI]

    Torgersen, Christian

    1 United States Geological Survey Geospatial Information Response Standard Operating Procedures May 20, 2013 Executive Summary The Geospatial, reporting requirements, and business processes for acquiring and providing geospatial

  15. Qualifying RPS State Export Markets (Massachusetts)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Massachusetts as eligible sources towards their RPS targets or goals. For specific...

  16. Qualifying RPS State Export Markets (Kansas)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Kansas as eligible sources towards their RPS targets or goals. For specific...

  17. Qualifying RPS State Export Markets (Michigan)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Michigan as eligible sources towards their RPS targets or goals. For specific...

  18. A better renewable portfolio standard

    SciTech Connect (OSTI)

    Casten, Sean

    2009-06-15T23:59:59.000Z

    It's time to throw out our RPS, throw out our Energy Efficiency Resource Standard, throw out all our definitions of eligible technologies, and replace them all with a single, clear incentive paid to any power plant that reduces our demand for fossil resources, pro rata with the fossil energy reduction: a Fossil Energy Reduction Standard. (author)

  19. STANDARD OPERATING PROCEDURES Site Selection

    E-Print Network [OSTI]

    Fischer, Emily V.

    IMPROVE STANDARD OPERATING PROCEDURES SOP 126 Site Selection Date Last Modified Modified by: 09 References none #12;SOP 126: Site Selection 3 1.0 PURPOSE AND APPLICABILITY This standard operating procedure field conditions, and for ease of operation and maintenance. IMPROVE aerosol samplers are generally

  20. Standards for Power Electronic Components

    E-Print Network [OSTI]

    Standards for Power Electronic Components and Systems EPE 14 ECCE Europe Dr Peter R. Wilson #12;Session Outline · "Standards for Power Electronic Components and Systems" ­ Peter Wilson, IEEE PELS Electronics ­ where next? · Wide Band Gap Devices ­ SiC, GaN etc... · Transformers (ETTT) · Power Modules

  1. Review of Consensus Standard Spectra for Flat Plate and Concentrating Photovoltaic Performance

    SciTech Connect (OSTI)

    Myers, D.

    2011-09-01T23:59:59.000Z

    Consensus standard reference terrestrial solar spectra are used to establish nameplate ratings for photovoltaic device performance at standard reporting conditions. This report describes reference solar spectra developed in the United States and international consensus standards community which are widely accepted as of this writing (June 2011).

  2. Drinking Water Standards Drinking water from a local public supply must

    E-Print Network [OSTI]

    Dyer, Bill

    Drinking Water Standards Drinking water from a local public supply must meet federal and state standards for safe drink- ing water. Two sets of standards-primary drinking water and secondary drinking water- establish Maximum Contaminant Levels (MCLs) for a variety of contaminants. If the water sup- ply

  3. Use reverse side of sheet for additional comments p. 1 The National Information Standards Organization's Study of

    E-Print Network [OSTI]

    Moen, William E.

    with the International Organization for Standardization (ISO). _____ Actively support (e.g., participant in standards Organization's Study of State Library Agencies' Information Technology Standards Policies & Procedures This questionnaire is part of a study sponsored by the National Information Standards Organization (NISO). This study

  4. Standard guide for conducting exfoliation corrosion tests in aluminum alloys

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    1992-01-01T23:59:59.000Z

    1.1 This guide differs from the usual ASTM standard in that it does not address a specific test. Rather, it is an introductory guide for new users of other standard exfoliation test methods, (see Terminology G 15 for definition of exfoliation). 1.2 This guide covers aspects of specimen preparation, exposure, inspection, and evaluation for conducting exfoliation tests on aluminum alloys in both laboratory accelerated environments and in natural, outdoor atmospheres. The intent is to clarify any gaps in existent test methods. 1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  5. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    2006. Inclusion of solar reflectance and thermal emittanceuse photovoltaic, solar- thermal, or roof-garden systems2006. Inclusion of solar reflectance and thermal emittance

  6. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    2006. Inclusion of solar reflectance and thermal emittance2006. Inclusion of solar reflectance and thermal emittanceproposed values of solar absorptance and thermal emittance (

  7. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    Environmental Design Green Building Rating System for newNC), version 2.2. U.S. Green Building Council. online atStar label, the LEED Green Building Rating System, and

  8. Energy Efficiency and Green Building Standards for State Buildings

    Broader source: Energy.gov [DOE]

    In March, 2006, Wisconsin enacted SB 459, the Energy Efficiency and Renewables Act. With respect to energy efficiency, this bill requires the Department of Administration (DOA) to prescribe and...

  9. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    NC), version 2.1. U.S. Green Building Council. Online atEnvironmental Design Green Building Rating System for newNC), version 2.2. U.S. Green Building Council. Online at

  10. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    requirements for residential roofs in Title 24. Online atAkbari, H. 1998. Cool roofs save energy. ASHRAE Transactionsfor steep-sloped nonresidential roofs in Title 24. Online at

  11. Washington State University STANDARDS OF CONDUCT FOR STUDENTS

    E-Print Network [OSTI]

    Collins, Gary S.

    .................................................................................. 5 WAC 50426207 Failure to comply with university officials. ....................................................... 11 STUDENT CONDUCT CODE PROCEDURES

  12. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    than solar reflectance, thermal emittance, or Energy- Star™solar absorptance and roof-assembly thermal transmittance that yield equal annual energysolar absorptance ? and roof-assembly thermal transmittance U that yield equal annual energy

  13. Status of cool roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem; Levinson, Ronnen

    2008-01-01T23:59:59.000Z

    ASHRAE 90.2, the International Energy Conservation Code, andor the International Energy Conservation Code (IECC). Other

  14. Evolution of cool-roof standards in the United States

    E-Print Network [OSTI]

    Akbari, Hashem

    2008-01-01T23:59:59.000Z

    ASHRAE 90.2, the International Energy Conservation Code, andor the International Energy Conservation Code (IECC). Otherand Title 24 International Energy Conservation Code The 2003

  15. Standards Development for Solid-State Lighting | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssues DOE's NuclearSpurring Solar Installations infor

  16. NREL: State and Local Governments - Renewable Fuel Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6Data TheNews TheEnergy RebatesFuel

  17. NREL: State and Local Governments - Renewable Portfolio Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6Data TheNews TheEnergy

  18. Standards Development for Solid-State Lighting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOriginEducationVideo »UsageSecretaryVideosSpring O&M UsersEnergy

  19. Solar Design Standards for State Buildings | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014,Zaleski - PolicyWork ForceSectorProcess Heat SolarDay 7

  20. CDF Note 10625 Search for the Standard Model Higgs boson in +

    E-Print Network [OSTI]

    Fermilab

    CDF Note 10625 Search for the Standard Model Higgs boson in + - + jets final state with 8.3fb-1 a search for the Standard Model Higgs boson in + - + jets final state, using CDF Run II data with an integrated luminosity of 8.3 fb-1 . The Signal considered in this search is four Higgs boson production

  1. Standard specification for architectural flat glass clad polycarbonate

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2010-01-01T23:59:59.000Z

    1.1 This specification covers the quality requirements for cut sizes of glass clad polycarbonate (GCP) for use in buildings as security, detention, hurricane/cyclic wind-resistant, and blast and ballistic-resistant glazing applications. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  2. Appliance Standards and Rulemaking Federal Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open...

  3. State Water Permit Regulation (Arkansas)

    Broader source: Energy.gov [DOE]

    It is the purpose of this regulation to adopt standards applicable to the storage, discharge, or disposal of any waste which, if unregulated, will cause pollution of waters of the state or result...

  4. Coherent control of single photon states

    E-Print Network [OSTI]

    G. J. Milburn

    2007-02-12T23:59:59.000Z

    We define a class of multi-mode single photon states suitable for quantum information applications. We show how standard amplitude modulation techniques may be used to control the pulse shape of single photon states.

  5. OKLAHOMA STATE UNIVERSITY June 30, 2008

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    #12;OKLAHOMA STATE UNIVERSITY June 30, 2008 Audited Financial Statements Management's Discussion Standards ...................48 Oklahoma State University Foundation...................................................................................................Appendix C #12;#12;#12;#12;#12;#12;#12;#12;Independent Auditors' Report Board of Regents Oklahoma

  6. OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2010 #12;OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2010 Audited Standards ...........20 #12;Independent Auditors' Report Board of Regents Oklahoma Agricultural

  7. OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2011 #12;OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2011 Standards ...........18 #12; 1 Independent Auditors' Report Board of Regents Oklahoma Agricultural

  8. OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2009 #12;OKLAHOMA STATE UNIVERSITY CENTER FOR INNOVATION AND ECONOMIC DEVELOPMENT, INC. June 30, 2009 Audited Standards ...........20 #12;Independent Auditors' Report Board of Regents Oklahoma Agricultural

  9. National Green Building Standard Analysis

    SciTech Connect (OSTI)

    NAHB Research Center, Upper Marlboro, Maryland

    2012-07-01T23:59:59.000Z

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  10. Lorentz conserving noncommutative standard model

    SciTech Connect (OSTI)

    Ettefaghi, M. M.; Haghighat, M. [Department of Physics, Isfahan University of Technology, Isfahan (Iran, Islamic Republic of)

    2007-06-15T23:59:59.000Z

    We consider Lorentz-conserving noncommutative field theory to construct the Lorentz-conserving noncommutative standard model based on the gauge group SU(3)xSU(2)xU(1). We obtain the enveloping algebra-valued of Higgs field up to the second order of the noncommutativity parameter {theta}{sub {mu}}{sub {nu}}. We derive the action at the leading order and find new vertices which are absent in the ordinary standard model as well as the minimal noncommutative standard model. We briefly study the phenomenological aspects of the model.

  11. Necessary and Sufficient Process leading to Work Smart Standards. Final report

    SciTech Connect (OSTI)

    NONE

    1996-11-01T23:59:59.000Z

    The Necessary and Sufficient Process leading to Work Smart Standards is a Department of Energy initiative to assure adequate protection for workers, the public, and the environment. The Work Smart Standards initiative directs the Laboratory to develop a set of ES and H standards based on the work performed at the Laboratory and the hazards associated with the work. Berkeley Lab`s set of Work Smart Standards includes required Federal, State and local laws and, additionally, national and international standards which represent the highest operating standards of industrial and commercial institutions.

  12. 1994 Building energy codes and standards workshops: Summary and documentation

    SciTech Connect (OSTI)

    Sandahl, L.J.; Shankle, D.L.

    1994-09-01T23:59:59.000Z

    During the spring of 1994, Pacific Northwest Laboratory (PNL), on behalf of the U.S. Department of Energy (DOE) Office of Codes and Standards, conducted five two-day Regional Building Energy Codes and Standards workshops across the United States. Workshops were held in Chicago, Philadelphia, Atlanta, Dallas, and Denver. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing state building codes in their states. The workshops provided an opportunity for state and other officials to learn more about the Energy Policy Act of 1992 (EPAct) requirements for residential and commercial building energy codes, the Climate Change Action Plan, the role of the U.S. Department of Energy and the Building Energy Standards Program at Pacific Northwest Laboratory, the commercial and residential codes and standards, the Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. In addition to receiving information on the above topics, workshop participants were also encouraged to inform DOE of their needs, particularly with regard to implementing building energy codes, enhancing current implementation efforts, and building on training efforts already in place. This paper documents the workshop findings and workshop planning and follow-up processes.

  13. Minimum Stream Flow Standards (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations apply to all dams and structures which impound or divert waters on rivers or their tributaries, with some exceptions. The regulations set standards for minimum flow (listed in the...

  14. Minimum Gas Service Standards (Ohio)

    Broader source: Energy.gov [DOE]

    Natural gas companies in Ohio are required to follow the Minimum Gas Service Standards, which are set and enforced by the Public Utilities Commission of Ohio. These rules are found in chapter 4901...

  15. PV System Performance and Standards

    SciTech Connect (OSTI)

    Osterwald, C. R.

    2005-11-01T23:59:59.000Z

    This paper presents a brief overview of the status and accomplishments during fiscal year (FY) 2005 of the Photovoltaic (PV) System Performance and Standards Subtask, which is part of the PV Systems Engineering Project (a joint NREL-Sandia project).

  16. Information Security Office Logging Standard

    E-Print Network [OSTI]

    Alpay, S. Pamir

    All Approvals Review Date Reviewed By Name/Title Action (Reviewed or Approved) 6/01/2013 CISO Jason Pufahl, CISO Approved 6/01/2013 RMAC Risk Management Advisory Council Reviewed #12;Logging Standard 2 | P

  17. Dam Safety Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    These rules set forth procedures for application to construct, repair or modify a dam and set standards for design and maintenance of dams. These rules also establish a dam inspection procedure....

  18. International Standards in Forensic DNA

    E-Print Network [OSTI]

    acceptable or desirable · something set up and established by authority as a rule for the measure of quantity Laboratory Accreditation QAS Documentary Standards & SWGDAM Guidelines Validated Methods (using physical

  19. Orange County- Wind Permitting Standards

    Broader source: Energy.gov [DOE]

    In December 2010, the County of Orange Board of Supervisors adopted small wind performance and development standards (Ord. No. 10-020) in order to promote distributed generation systems in non...

  20. Commercial Building Codes and Standards

    Broader source: Energy.gov [DOE]

    Once an energy-efficient technology or practice is widely available in the market, it can become the baseline of performance through building energy codes and equipment standards. The Building...

  1. Nuclear Data Verification and Standardization

    SciTech Connect (OSTI)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01T23:59:59.000Z

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  2. Standard specification for nuclear-Grade boron carbide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2007-01-01T23:59:59.000Z

    1.1 This specification applies to boron carbide pellets for use as a control material in nuclear reactors. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

  3. Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This specification applies to pellets of stabilized zirconium oxide used in nuclear reactors. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

  4. Help for the Developers of Control System Cyber Security Standards

    SciTech Connect (OSTI)

    Robert P. Evans

    2008-05-01T23:59:59.000Z

    A Catalog of Control Systems Security: Recommendations for Standards Developers (Catalog), aimed at assisting organizations to facilitate the development and implementation of control system cyber security standards, has been developed. This catalog contains requirements that can help protect control systems from cyber attacks and can be applied to the Critical Infrastructures and Key Resources of the United States and other nations. The requirements contained in the catalog are a compilation of practices or various industry bodies used to increase the security of control systems from both physical and cyber attacks. They should be viewed as a collection of recommendations to be considered and judiciously employed, as appropriate, when reviewing and developing cyber security standards for control systems. The recommendations in the Catalog are intended to be broad enough to provide any industry using control systems the flexibility needed to develop sound cyber security standards specific to their individual security requirements.

  5. National Energy Efficiency Evaluation, Measurement and Verification (EM&V) Standard: Scoping Study of Issues and Implementation Requirements

    E-Print Network [OSTI]

    Schiller, Steven R.

    2011-01-01T23:59:59.000Z

    Actuarial Pricing Of Energy Efficiency Projects: Lessonsand Effectiveness of Energy Efficiency Programs,” LBNL-ACEEE 2010. “State Energy Efficiency Resource Standard (

  6. C o l l e g e -C o n s e r va t o r y o f M u s i c www.ccm.uc.edu/comp_theory_hist

    E-Print Network [OSTI]

    Papautsky, Ian

    C o l l e g e - C o n s e r va t o r y o f M u s i c www.ccm.uc.edu/comp_theory_hist ccmadmis-Conservatory of Music (CCM) acquire a broad knowledge of the field and its multidisciplinary practices. An emphasis in its own time and in current reception. Promi- nent composers, historians and theorists visit CCM

  7. An overview of software safety standards

    SciTech Connect (OSTI)

    Lawrence, J.D.

    1995-10-01T23:59:59.000Z

    The writing of standards for software safety is an increasingly important activity. This essay briefly describes the two primary standards-writing organizations, IEEE and IEC, and provides a discussion of some of the more interesting software safety standards.

  8. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format-271 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange Sponsored by Information Access Division Information Technology Laboratory National Institute of Standards

  9. Version Auteur Monitoring the International Standardization Process

    E-Print Network [OSTI]

    Boyer, Edmond

    organizations are in charge of global security management. To address this issue, ISO (International Standards Organization), the main international organization for technical standardization, has launched a set of studiesVersion Auteur Monitoring the International Standardization Process Theoretical Choices

  10. Standard Two: Planning and Evaluation

    E-Print Network [OSTI]

    Snider, Barry B.

    13 Standard Two: Planning and Evaluation Overview Brandeis University's goals are to sustain committed to reflection, analysis, and evaluation, Brandeis has engaged over the past decade and a half Thier's 1992 Reestablishing Academic and Economic Equilibrium, and President Reinharz's 1996 Brandeis

  11. Residential ventilation standards scoping study

    SciTech Connect (OSTI)

    McKone, Thomas E.; Sherman, Max H.

    2003-10-01T23:59:59.000Z

    The goals of this scoping study are to identify research needed to develop improved ventilation standards for California's Title 24 Building Energy Efficiency Standards. The 2008 Title 24 Standards are the primary target for the outcome of this research, but this scoping study is not limited to that timeframe. We prepared this scoping study to provide the California Energy Commission with broad and flexible options for developing a research plan to advance the standards. This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the ventilation needs of California residences, determining the bases for setting residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and corresponding levels of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  12. Standards for language encoding: ISO

    E-Print Network [OSTI]

    Erjavec, Toma?

    Standards for language encoding: ISO Tomaz Erjavec Dept. of Knowledge Technologies Jozef Stefan Institute ESSLLI 2011 #12;Overview of the lecture 1. How ISO works 2. ISO TC 37 3. Dates, times & languages 4. ISO Annotation Frameworks #12;http://www.iso.org/ The world's largest developer and publisher

  13. Appliance and Equipment Energy Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  14. Alternative Energy Portfolio Standard | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Portfolio Standard Provider Pennsylvania Public Utility Commission Pennsylvania's Alternative Energy Portfolio Standard (AEPS), created by S.B. 1030 on November 30, 2004,...

  15. Quality Assurance Functional Area Qualification Standard - DOE...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    50-2013, Quality Assurance Functional Area Qualification Standard by Administrator The Quality Assurance (QA) Functional Area Qualification Standard (FAQS) establishes common...

  16. Ambient Air Quality Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    This article lists specific standards for ambient air quality standards for particulate matter, sulfur dioxide, carbon monoxide, ozone, lead and nitrogen dioxide.

  17. Technical Standards, Program Project Justification Statement...

    Energy Savers [EERE]

    Standards, Program Project Justification Statement - August 29, 2012 August 29, 2012 DOE Technical Standards Program Project Justification Statement As part of the new...

  18. Globalization of ASME Nuclear Codes and Standards

    SciTech Connect (OSTI)

    Swayne, Rick [Reedy Engineering, 3425 South Bascom Ave. Suite E, Campbell, CA 95008 (United States); Erler, Bryan A. [Erler Engineering, Ltd., North Vernon, Indiana (United States)

    2006-07-01T23:59:59.000Z

    With the globalization of the nuclear industry, it is clear that the reactor suppliers are based in many countries around the world (such as United States, France, Japan, Canada, South Korea, South Africa) and they will be marketing their reactors to many countries around the world (such as US, China, South Korea, France, Canada, Finland, Taiwan). They will also be fabricating their components in many different countries around the world. With this situation, it is clear that the requirements of ASME Nuclear Codes and Standards need to be adjusted to accommodate the regulations, fabricating processes, and technology of various countries around the world. It is also very important for the American Society of Mechanical Engineers (ASME) to be able to assure that products meeting the applicable ASME Code requirements will provide the same level of safety and quality assurance as those products currently fabricated under the ASME accreditation process. To do this, many countries are in the process of establishing or changing their regulations, and it is important for ASME to interface with the appropriate organizations in those countries, in order to ensure there is effective use of ASME Codes and standards around the world. (authors)

  19. East Tennessee State University

    E-Print Network [OSTI]

    Karsai, Istvan

    site (www.etsu.edu/irb). Contact the IRB at 439-6053 with any questions. Reporting Unanticipated- tional Officials. ETSU and ETSU/VA Office for the Protection of Human Research Subjects PO Box 70565 Johnson City, TN 37614 Version 10/23/07 Phone: (423) 439-6053 Fax: (423)439-6060 Website: www.etsu

  20. ANSI/ASHRAE/IES Standard 90.1-2013 Preliminary Determination: Qualitative Analysis

    SciTech Connect (OSTI)

    Halverson, Mark A.; Hart, Reid; Athalye, Rahul A.; Rosenberg, Michael I.; Richman, Eric E.; Winiarski, David W.

    2014-03-01T23:59:59.000Z

    Section 304(b) of the Energy Conservation and Production Act (ECPA), as amended, requires the Secretary of Energy to make a determination each time a revised version of ASHRAE Standard 90.1 is published with respect to whether the revised standard would improve energy efficiency in commercial buildings. When the U.S. Department of Energy (DOE) issues an affirmative determination on Standard 90.1, states are statutorily required to certify within two years that they have reviewed and updated the commercial provisions of their building energy code, with respect to energy efficiency, to meet or exceed the revised standard. This report provides a preliminary qualitative analysis of all addenda to ANSI/ASHRAE/IES Standard 90.1-2010 (referred to as Standard 90.1-2010 or 2010 edition) that were included in ANSI/ASHRAE/IES Standard 90.1-2013 (referred to as Standard 90.1-2013 or 2013 edition).

  1. Social Responsibility Standards: A Quick Glimpse Although efforts to establish measurements, standards and certifications related to

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    : ISO Standard 24000--Social Responsibility: The International Organization current apply FSC standards for forest management. International Organic for Standardization is developing an international standard of voluntary guidelines for social

  2. NASA/TP2011217067 State-Based Implicit Coordination

    E-Print Network [OSTI]

    Narkawicz, Anthony J.

    Center for AeroSpace Information 7115 Standard Drive Hanover, MD 21076­1320 #12;NASA/TP­2011­217067 State. Available from: NASA Center for AeroSpace Information 7115 Standard Drive Hanover, MD 21076-1320 443

  3. Are Standard Solar Models Reliable?

    E-Print Network [OSTI]

    John N. Bahcall; M. H. Pinsonneault; Sarbani Basu; J. Christensen-Dalsgaard

    1996-12-20T23:59:59.000Z

    The sound speeds of solar models that include element diffusion agree with helioseismological measurements to a rms discrepancy of better than 0.2% throughout almost the entire sun. Models that do not include diffusion, or in which the interior of the sun is assumed to be significantly mixed, are effectively ruled out by helioseismology. Standard solar models predict the measured properties of the sun more accurately than is required for applications involving solar neutrinos.

  4. DOE limited standard: Operations assessments

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    Purpose of this standard is to provide DOE Field Element assessors with a guide for conducting operations assessments, and provide DOE Field Element managers with the criteria of the EM Operations Assessment Program. Sections 6.1 to 6.21 provide examples of how to assess specific areas; the general techniques of operations assessments (Section 5) may be applied to other areas of health and safety (e.g. fire protection, criticality safety, quality assurance, occupational safety, etc.).

  5. NREL: Photovoltaics Research - Standards Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for Renewable Energy: Grid Integration NRELCost of6 July 16,Standards Development NREL's

  6. Employee Participation Through High Standards and Information Feedback

    E-Print Network [OSTI]

    Weisenthal, M.

    shoot for and see as a goal worth being invo~ved in. I I We have a large 3' x 5' heavy nylon bannef which states this standard and tells your pepple "It's In Your Hands." We recommend you displlay as many as you need to get across the point~1 Now... in energy usage. Most people lack enthusiasm for taking an ac tive part in eliminating energy waste because there isn't a system set up that would be meaning ful to them. A meaningful system would give a set of high standards, requirements...

  7. Standard specification for nuclear-grade aluminum oxide pellets

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2008-01-01T23:59:59.000Z

    1.1 This specification applies to pellets of aluminum oxide that may be ultimately used in a reactor core, for example, as filler or spacers within fuel, burnable poison, or control rods. In order to distinguish between the subject pellets and “burnable poison” pellets, it is established that the subject pellets are not intended to be used as neutron-absorbing material. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

  8. New NHTSA CAFE Standards (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01T23:59:59.000Z

    EISA2007 requires the National Highway Traffic Safety Administration (NHTSA) to raise the Corporate Average Fuel Economy (CAFE) standards for passenger cars and light trucks to ensure that the average tested fuel economy of the combined fleet of all new passenger cars and light trucks sold in the United States in model year (MY) 2020 equals or exceeds 35 mpg, 34% above the current fleet average of 26.4 mpg. Pursuant to this legislation, NHTSA recently proposed revised CAFE standards that substantially increase the minimum fuel economy requirements for passenger cars and light trucks for MY 2011 through MY 2015.

  9. Collaborative Virtual Environment Standards: A Performance Evaluation

    E-Print Network [OSTI]

    Ottawa, University of

    for each standard varies from graphics and rendering to simulation and network communication. Standards categories: Rendering and Graphics and Communications Middleware. 2.1 Rendering and Graphics These standards1 Collaborative Virtual Environment Standards: A Performance Evaluation Jauvane C. de Oliveira

  10. Recombinant fluorescent protein microsphere calibration standard

    DOE Patents [OSTI]

    Nolan, John P. (Santa Fe, NM); Nolan, Rhiannon L. (Santa Fe, NM); Ruscetti, Teresa (Los Alamos, NM); Lehnert, Bruce E. (Los Alamos, NM)

    2001-01-01T23:59:59.000Z

    A method for making recombinant fluorescent protein standard particles for calibration of fluorescence instruments.

  11. Forests / Climate changeStandards persp ctive

    E-Print Network [OSTI]

    Boyer, Edmond

    at implementing collective action, private actors ­ multinational companies and NGOs ­ are developing standards the privatisation of sustainable development policy. Yet private standards and public regulations are often with the proliferation of standards, it became necessary to codify the way standards were developed. These private

  12. The Potential for Avoided Emissions from Photovoltaic Electricity in the United States

    E-Print Network [OSTI]

    Zhai, Pei

    2014-01-01T23:59:59.000Z

    integration,  The  PR&C  Renewable  Power  Service,  2003  Powers  N.  Do  state  renewable  portfolio  standards  promote  in-­?state  renewable  generation?   Energ  

  13. Innovation, renewable energy, and state investment: Case studies of leading clean energy funds

    E-Print Network [OSTI]

    Wiser, Ryan; Bolinger, Mark; Milford, Lewis; Porter, Kevin; Clark, Roger

    2002-01-01T23:59:59.000Z

    renewable energy credits as a result of the state’s Renewable Portfolio Standard; Expand the use of solar technologies in grid-independent applications

  14. November 1998 U.S. DEPARTMENT OF COMMERCE Technology AdministrationNational Institute of Standards and Technology

    E-Print Network [OSTI]

    cooperation with the International Organization for Standardization (ISO). In the United States, the new inter and Technology COMMON CRITERIA: LAUNCHING THE INTERNATIONAL STANDARD The Common Criteria (CC) for Infor- mation International Standard (IS) 15408 in early 1999. Developing the CC has been a five- year international project

  15. Building and Buildings, Scotland: The Building Standards Advisory Committee (Scotland) Regulations, 1959 

    E-Print Network [OSTI]

    Maclay, John.S.

    1959-01-01T23:59:59.000Z

    These regulations make provision for the constitution and procedure of the Building Standards Advisory Committee which the Secretary of State is required to appoint under section 12 of the Building (Scotland) Act, 1959

  16. VA's Performance Contracting Program Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric Vehicle and03/02 TUE 08:59CapabilityVulnerabilities |2 1 Locations of

  17. Multipartite secure state distribution

    SciTech Connect (OSTI)

    Duer, W.; Briegel, H.-J. [Institut fuer Theoretische Physik, Universitaet Innsbruck, Technikerstrasse 25, A-6020 Innsbruck (Austria); Institut fuer Quantenoptik und Quanteninformation der Oesterreichischen, Akademie der Wissenschaften, Innsbruck (Austria); Calsamiglia, J. [Institut fuer Theoretische Physik, Universitaet Innsbruck, Technikerstrasse 25, A-6020 Innsbruck (Austria)

    2005-04-01T23:59:59.000Z

    We introduce the distribution of a secret multipartite entangled state in a real-world scenario as a quantum primitive. We show that in the presence of noisy quantum channels (and noisy control operations), any state chosen from the set of two-colorable graph states (Calderbank-Shor-Steane codewords) can be created with high fidelity while it remains unknown to all parties. This is accomplished by either blind multipartite entanglement purification, which we introduce in this paper, or by multipartite entanglement purification of enlarged states, which offers advantages over an alternative scheme based on standard channel purification and teleportation. The parties are thus provided with a secret resource of their choice for distributed secure applications.

  18. Standard test method for isotopic analysis of uranium hexafluoride by double standard single-collector gas mass spectrometer method

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2010-01-01T23:59:59.000Z

    1.1 This is a quantitative test method applicable to determining the mass percent of uranium isotopes in uranium hexafluoride (UF6) samples with 235U concentrations between 0.1 and 5.0 mass %. 1.2 This test method may be applicable for the entire range of 235U concentrations for which adequate standards are available. 1.3 This test method is for analysis by a gas magnetic sector mass spectrometer with a single collector using interpolation to determine the isotopic concentration of an unknown sample between two characterized UF6 standards. 1.4 This test method is to replace the existing test method currently published in Test Methods C761 and is used in the nuclear fuel cycle for UF6 isotopic analyses. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appro...

  19. New Study Finds Strong Carbon Pollution Standards Improve Air Quality, Environment, and Health

    E-Print Network [OSTI]

    Mohan, Chilukuri K.

    New Study Finds Strong Carbon Pollution Standards Improve Air Quality, Environment, and Health, Co- benefits of Carbon Standards: Air Pollution Changes under Different 111d Options for Existing-by-state changes in harmful air pollution, it is the first study to quantify and map the co-benefits of power plant

  20. Standard testing procedures for optical fiber and unshielded twisted pair at Sandia National Laboratories. Revision

    SciTech Connect (OSTI)

    Adams, R.L. [Sandia National Labs., Albuquerque, NM (United States). Communications Dept.

    1994-09-01T23:59:59.000Z

    This revision updates Sandia`s working standard for testing optical fiber and unshielded twisted pair cables included in the Lab-wide telecommunications cabling infrastructure. The purpose of these standard testing procedures is to deliver to all Sandians a reliable, low-maintenance, state-of-the-art, ubiquitous telecommunications cabling infrastructure capable of satisfying all current and future telecommunication needs.

  1. Cloud Computing Forum & Workshop IV Agenda National Institute of Standards and Technology

    E-Print Network [OSTI]

    Cloud Computing Forum & Workshop IV Agenda National Institute of Standards and Technology 100 Policy, Department of State 1. Yeong Ro Lee, National Standards Coordinator for Cloud Computing for Information Society and Media, European Commission 10:40 11:00 USG Cloud Computing Technology Roadmap

  2. Michigan State IntegritySPONSORED BY

    E-Print Network [OSTI]

    Barrash, Warren

    Michigan State Research IntegritySPONSORED BY · The Office of Research Ethics and Standards CONTROL & MANAGEMENT AND AUTHORSHIP GUIDELINES AT MICHIGAN STATE UNIVERSITY: THE NEED FOR BEST PRACTICES Integrity Michigan State University Research Integrity's (R.I.) audience has expanded since publishing

  3. Cost Estimating, Analysis, and Standardization

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1984-11-02T23:59:59.000Z

    To establish policy and responsibilities for: (a) developing and reviewing project cost estimates; (b) preparing independent cost estimates and analysis; (c) standardizing cost estimating procedures; and (d) improving overall cost estimating and analytical techniques, cost data bases, cost and economic escalation models, and cost estimating systems. Cancels DOE O 5700.2B, dated 8-5-1983; DOE O 5700.8, dated 5-27-1981; and HQ 1130.1A, dated 12-30-1981. Canceled by DOE O 5700.2D, dated 6-12-1992

  4. Standard Templates Adaptive Parallel Library

    E-Print Network [OSTI]

    Arzu, Francisco Jose

    2000-01-01T23:59:59.000Z

    ]. STAPL &s v, nuen m a simple extension of the C++ hingu. & e f1. 4f which prov&dcs a SPMD motlel of' parallelism that maps easily onto distnbuted sharcd- memory sys&ems (e. g, HP V-class, SGI Power Challenge o& networks of workstations using Tread... () uses the schcduler to dispatch the per-processor segments of the container to the processors. Figure 2 show the relations between the STAPL components. 2. 2 Related %'ork 2. 2. 1 Parallel Standard Template I. ibrary The HPC+ i consortium h...

  5. Standards of Ethical Conduct Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over Our Instagram Secretary900 Special Report:Spotlight:California  Standards of

  6. Standard Solar | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPID‎SolarCity CorpSpringfield,Wind Farm JumpStallionStandStandard

  7. Fermilab | Graphic Standards at Fermilab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC) Environmental Assessments (EA)Budget » FYU.S. DOEFigureTip ofTheGraphic Standards at

  8. Standard Terms and Conditions | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of ScienceandMesa del Sol HomeFacebookScholarshipSpiraling Laser Pulses Could VideoAboutStandard Terms

  9. 1998 federal technical standards workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1998-10-01T23:59:59.000Z

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  10. Issues in Purchasing and Maintaining Intrinsic Standards

    SciTech Connect (OSTI)

    PETTIT,RICHARD B.; JAEGER,KLAUS; EHRLICH,CHARLES D.

    2000-09-12T23:59:59.000Z

    Intrinsic standards are widely used in the metrology community because they realize the best level uncertainty for many metrology parameters. For some intrinsic standards, recommended practices have been developed to assist metrologists in the selection of equipment and the development of appropriate procedures in order to realize the intrinsic standard. As with the addition of any new standard, the metrology laboratory should consider the pros and cons relative to their needs before purchasing the standard so that the laboratory obtains the maximum benefit from setting up and maintaining these standards. While the specific issues that need to be addressed depend upon the specific intrinsic standard and the level of realization, general issues that should be considered include ensuring that the intrinsic standard is compatible with the laboratory environment, that the standard is compatible with the current and future workload, and whether additional support standards will be required in order to properly maintain the intrinsic standard. When intrinsic standards are used to realize the best level of uncertainty for a specific metrology parameter, they usually require critical and important maintenance activities. These activities can including training of staff in the system operation, as well as safety procedures; performing periodic characterization measurements to ensure proper system operation; carrying out periodic intercomparisons with similar intrinsic standards so that proper operation is demonstrated; and maintaining control or trend charts of system performance. This paper has summarized many of these important issues and therefore should be beneficial to any laboratory that is considering the purchase of an intrinsic standard.

  11. A Two-Stage Kalman Filter Approach for Robust and Real-Time Power System State Estimation

    SciTech Connect (OSTI)

    Zhang, Jinghe; Welch, Greg; Bishop, Gary; Huang, Zhenyu

    2014-04-01T23:59:59.000Z

    As electricity demand continues to grow and renewable energy increases its penetration in the power grid, realtime state estimation becomes essential for system monitoring and control. Recent development in phasor technology makes it possible with high-speed time-synchronized data provided by Phasor Measurement Units (PMU). In this paper we present a two-stage Kalman filter approach to estimate the static state of voltage magnitudes and phase angles, as well as the dynamic state of generator rotor angles and speeds. Kalman filters achieve optimal performance only when the system noise characteristics have known statistical properties (zero-mean, Gaussian, and spectrally white). However in practice the process and measurement noise models are usually difficult to obtain. Thus we have developed the Adaptive Kalman Filter with Inflatable Noise Variances (AKF with InNoVa), an algorithm that can efficiently identify and reduce the impact of incorrect system modeling and/or erroneous measurements. In stage one, we estimate the static state from raw PMU measurements using the AKF with InNoVa; then in stage two, the estimated static state is fed into an extended Kalman filter to estimate the dynamic state. Simulations demonstrate its robustness to sudden changes of system dynamics and erroneous measurements.

  12. Green Power Marketing in the United States: A Status Report ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Codes, Standards & Utility Policies Subprogram Soft Costs Author National Renewable Energy Laboratory Green Power Marketing in the United States: A Status Report (11th...

  13. Qualifying RPS Market States (Newfoundland and Labrador, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in Newfoundland and Labrador, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. ...

  14. State and Alternative Fuel Provider Fleet Compliance Methods (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2009-12-01T23:59:59.000Z

    Fact sheet describes the difference between Standard and Alternative Compliance requirements for state and alternative fuel provider fleets covered under the Energy Policy Acts of 1992 and 2005.

  15. State and Alternative Fuel Provider Fleet Compliance Methods (Revised) (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-03-01T23:59:59.000Z

    This fact sheet describes the difference between Standard and Alternative Compliance requirements for state and alternative fuel provider fleets covered by the Energy Policy Act.

  16. 1995 building energy codes and standards workshops: Summary and documentation

    SciTech Connect (OSTI)

    Sandahl, L.J.; Shankle, D.L.

    1996-02-01T23:59:59.000Z

    During the spring of 1995, Pacific Northwest National Laboratory (PNNL) conducted four two-day Regional Building Energy Codes and Standards workshops across the US. Workshops were held in Chicago, Denver, Rhode Island, and Atlanta. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing building energy codes in their states. The workshops provided an opportunity for state and other officials to learn more about residential and commercial building energy codes and standards, the role of the US Department of Energy and the Building Standards and Guidelines Program at Pacific Northwest National Laboratory, Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. Participants heard success stories, got tips on enforcement training, and received technical support materials. In addition to receiving information on the above topics, workshop participants had an opportunity to provide input on code adoption issues, building industry training issues, building design issues, and exemplary programs across the US. This paper documents the workshop planning, findings, and follow-up processes.

  17. A new standard pulsar magnetosphere

    SciTech Connect (OSTI)

    Contopoulos, Ioannis [Research Center for Astronomy and Applied Mathematics, Academy of Athens, Athens 11527 (Greece); Kalapotharakos, Constantinos [University of Maryland, College Park (UMDCP/CRESST), College Park, MD 20742 (United States); Kazanas, Demosthenes, E-mail: icontop@academyofathens.gr [Astrophysics Science Division, NASA/Goddard Space Flight Center, Greenbelt, MD 20771 (United States)

    2014-01-20T23:59:59.000Z

    In view of recent efforts to probe the physical conditions in the pulsar current sheet, we revisit the standard solution that describes the main elements of the ideal force-free pulsar magnetosphere. The simple physical requirement that the electric current contained in the current layer consists of the local electric charge moving outward at close to the speed of light yields a new solution for the pulsar magnetosphere everywhere that is ideal force-free except in the current layer. The main elements of the new solution are as follows: (1) the pulsar spindown rate of the aligned rotator is 23% larger than that of the orthogonal vacuum rotator; (2) only 60% of the magnetic flux that crosses the light cylinder opens up to infinity; (3) the electric current closes along the other 40%, which gradually converges to the equator; (4) this transfers 40% of the total pulsar spindown energy flux in the equatorial current sheet, which is then dissipated in the acceleration of particles and in high-energy electromagnetic radiation; and (5) there is no separatrix current layer. Our solution is a minimum free-parameter solution in that the equatorial current layer is electrostatically supported against collapse and thus does not require a thermal particle population. In this respect, it is one more step toward the development of a new standard solution. We discuss the implications for intermittent pulsars and long-duration gamma-ray bursts. We conclude that the physical conditions in the equatorial current layer determine the global structure of the pulsar magnetosphere.

  18. Information Technology: American National Standard for

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format Publication 500-245 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange of Fingerprint, Facial, & Scar Mark & Tattoo (SMT) Information Sponsored by Information Technology

  19. Energy Management Standards (EnMS)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Management Standards (EnMS) Paul Scheihing U.S. DOE January, 2009 2 Why an Energy Management Standard? Most energy efficiency in industry is achieved through changes in how energy...

  20. New and revised standards for coke production

    SciTech Connect (OSTI)

    G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15T23:59:59.000Z

    The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

  1. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format 500-275 Information Technology: American National Standard for Information Systems-- Data Format Coleman, and Patrice Yuh, Editors Sponsored by Information Access Division Information Technology

  2. FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY

    E-Print Network [OSTI]

    .................................................................................... 21 1.2.4. Food irradiation ....1 FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY Radioactivity in Food, Fisheries and Aquaculture Science on behalf of the Food Standards Agency and the Scottish Environment

  3. Late standardization and technological catch-up

    E-Print Network [OSTI]

    Ratanawaraha, Apiwat, 1972-

    2006-01-01T23:59:59.000Z

    In this study, we examine the process of "late standardization," in which latecomers engage in standards activities in order to move towards and beyond the technological frontier. Based on case studies of latecomers in the ...

  4. 1996 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  5. Appliance Standards and Rulemaking Federal Advisory Committee...

    Energy Savers [EERE]

    of the National Energy Laboratories Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Appliance & Equipment Standards Building Energy Codes...

  6. Standard practice for dissolution of UF6 from P-10 tubes

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2008-01-01T23:59:59.000Z

    1.1 This practice covers the dissolution of UF6 from a P-10 tube to provide solutions for analysis. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific safeguard and safety precaution statements, see Section 8.

  7. Standard test method for determination of technetium-99 in uranium hexafluoride by liquid scintillation counting

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2008-01-01T23:59:59.000Z

    1.1 This test method is a quantitative method used to determine technetium-99 (99Tc) in uranium hexafluoride (UF6) by liquid scintillation counting. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  8. PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS Title 24, Part 6, and Associated400201200415 DAY #12;2013 Building Energy Efficiency Standards Page 1 NOTICE NOTICE This version of the 2013 Building Energy Efficiency Standards is a marked version; that is, it contains underlined or struck

  9. Implementation of modern communication standard on SGU

    E-Print Network [OSTI]

    standard protocol in the industry. The standards in question are the existing protocol, IEC 60870-5-104 and the future, IEC 61850, which covers the design of substations in the electricity supply. IEC 61850 will be conducted. In addition to the IEC 61850 standard, the project will examine safety hazards, such a system may

  10. Economic Impact of Standard Reference Materials

    E-Print Network [OSTI]

    00-1 Planning Report Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Administration #12;February 2000 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final-006 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final Report February 2000

  11. The JPEG 2000 Still Image Compression Standard

    E-Print Network [OSTI]

    Mignotte, Max

    Organization for Standardization (ISO), the International Tele- communications Union (ITU), and the Inter, and Touradj Ebrahimi T he development of standards (emerging and es- tablished) by the International, testing and documenting the algorithm. JPEG became Draft International Standard (DIS) in 1991

  12. KH?O SÁT M?I QUAN H? GI?A ?? TH?M VÀ ?NG SU?T V?A ...

    E-Print Network [OSTI]

    GEOPET

    2005-09-30T23:59:59.000Z

    This coupled interaction between geo-mechanics and fluid production can significantly influence both the stress state and fluid flow in the reservoir. Many.

  13. Qualifying RPS State Export Markets (Rhode Island)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Rhode Island as eligible sources towards their RPS targets or goals. For specific...

  14. Qualifying RPS State Export Markets (South Carolina)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in South Carolina as eligible sources towards their RPS targets or goals. For specific...

  15. Qualifying RPS State Export Markets (New Hampshire)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in New Hampshire as eligible sources towards their RPS targets or goals. For specific...

  16. Qualifying RPS State Export Markets (Ohio)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Ohio as eligible sources towards their RPS targets or goals. For specific information...

  17. Qualifying RPS State Export Markets (New York)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in New York as eligible sources towards their RPS targets or goals. For specific...

  18. Qualifying RPS State Export Markets (Iowa)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in Iowa as eligible sources towards their RPS targets or goals. For specific information...

  19. Qualifying RPS State Export Markets (New Jersey)

    Broader source: Energy.gov [DOE]

    This entry lists the states with Renewable Portfolio Standard (RPS) policies that accept generation located in New Jersey as eligible sources towards their RPS targets or goals. For specific...

  20. Qualifying RPS Market States (New Brunswick, Canada)

    Broader source: Energy.gov [DOE]

    This entry lists the states with RPS policies that accept generation located in New Brunswick, Canada as eligible sources towards their Renewable Portfolio Standard targets or goals. For specific...