Powered by Deep Web Technologies
Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Ute Mountain Ute Tribe Community-Scale Solar Feasibility Study  

SciTech Connect (OSTI)

Parametrix Inc. conducted a feasibility study for the Ute Mountain Ute Tribe to determine whether or not a community-scale solar farm would be feasible for the community. The important part of the study was to find where the best fit for the solar farm could be. In the end, a 3MW community-scale solar farm was found best fit with the location of two hayfield sites.

Rapp, Jim [Parametrix; Knight, Tawnie [Ute Mountain Ute Tribe

2014-01-30T23:59:59.000Z

2

Correlation of producing Fruitland Formation coals within the western outcrop and coalbed methane leakage on the Southern Ute Reservation  

SciTech Connect (OSTI)

The Colorado Geological Survey and Southern Ute Indian Tribe proposed to determine the cause of several gas seeps which are occurring on the western outcrop of the coalbed methane producing Fruitland Formation on the Southern Ute Indian Reservation. Correlation between outcrop coals and subsurface coals was necessary to determine seep source in the northern part of the study area. Subsurface studies include structure and net coal isopach maps, stratigraphy was cross-sections, production maps, and a production database. Detailed coal stratigraphy was correlated through production wells near the outcrop region. These maps and cross-sections were correlated to new surface outcrop maps generated by the Colorado, Geological Survey and the Southern Ute Division of Energy Resources. Methane gas seepage has been noted historically within the study area. The total investigation may help determine if gas seepage is natural, a result of coalbed methane development, or some combination of the above.

Carroll, Christopher J.; Mathews, Stephanie; Wickman, Barbara

2000-07-07T23:59:59.000Z

3

Autonomous grain combine control system  

DOE Patents [OSTI]

A system for controlling a grain combine having a rotor/cylinder, a sieve, a fan, a concave, a feeder, a header, an engine, and a control system. The feeder of the grain combine is engaged and the header is lowered. A separator loss target, engine load target, and a sieve loss target are selected. Grain is harvested with the lowered header passing the grain through the engaged feeder. Separator loss, sieve loss, engine load and ground speed of the grain combine are continuously monitored during the harvesting. If the monitored separator loss exceeds the selected separator loss target, the speed of the rotor/cylinder, the concave setting, the engine load target, or a combination thereof is adjusted. If the monitored sieve loss exceeds the selected sieve loss target, the speed of the fan, the size of the sieve openings, or the engine load target is adjusted.

Hoskinson, Reed L.; Kenney, Kevin L.; Lucas, James R.; Prickel, Marvin A.

2013-06-25T23:59:59.000Z

4

Union Temporal de Empresas UTE | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov PtyInformation UC 19-6-401 et seq.North Carolina:Parish, Louisiana:Empresas UTE

5

Multicomponent Seismic Analysis and Calibration to Improve Recovery from Algal Mounds: Application to the Roadrunner/Towaoc area of the Paradox Basin, UTE Mountain UTE Reservation, Colorado  

SciTech Connect (OSTI)

The goals of this project were: (1) To enhance recovery of oil contained within algal mounds on the Ute Mountain Ute tribal lands. (2) To promote the use of advanced technology and expand the technical capability of the Native American Oil production corporations by direct assistance in the current project and dissemination of technology to other Tribes. (3) To develop an understanding of multicomponent seismic data as it relates to the variations in permeability and porosity of algal mounds, as well as lateral facies variations, for use in both reservoir development and exploration. (4) To identify any undiscovered algal mounds for field-extension within the area of seismic coverage. (5) To evaluate the potential for applying CO{sub 2} floods, steam floods, water floods or other secondary or tertiary recovery processes to increase production. The technical work scope was carried out by: (1) Acquiring multicomponent seismic data over the project area; (2) Processing and reprocessing the multicomponent data to extract as much geological and engineering data as possible within the budget and time-frame of the project; (3) Preparing maps and data volumes of geological and engineering data based on the multicomponent seismic and well data; (4) Selecting drilling targets if warranted by the seismic interpretation; (5) Constructing a static reservoir model of the project area; and (6) Constructing a dynamic history-matched simulation model from the static model. The original project scope covered a 6 mi{sup 2} (15.6 km{sup 2}) area encompassing two algal mound fields (Towaoc and Roadrunner). 3D3C seismic data was to acquired over this area to delineate mound complexes and image internal reservoir properties such as porosity and fluid saturations. After the project began, the Red Willow Production Company, a project partner and fully-owned company of the Southern Ute Tribe, contributed additional money to upgrade the survey to a nine-component (3D9C) survey. The purpose of this upgrade to nine components was to provide additional shear wave component data that might prove useful in delineating internal mound reservoir attributes. Also, Red Willow extended the P-wave portion of the survey to the northwest of the original 6 mi{sup 2} (15.6 km{sup 2}) 3D9C area in order to extend coverage further to the northwest to the Marble Wash area. In order to accomplish this scope of work, 3D9C seismic data set covering two known reservoirs was acquired and processed. Three-dimensional, zero-offset vertical seismic profile (VSP) data was acquired to determine the shear wave velocities for processing the sh3Dseismic data. Anisotropic velocity, and azimuthal AVO processing was carried out in addition to the conventional 3D P-wave data processing. All P-, PS- and S-wave volumes of the seismic data were interpreted to map the seismic response. The interpretation consisted of conventional cross-plots of seismic attributes vs. geological and reservoir engineering data, as well as multivariate and neural net analyses to assess whether additional resolution on exploration and engineering parameters could be achieved through the combined use of several seismic variables. Engineering data in the two reservoirs was used to develop a combined lithology, structure and permeability map. On the basis of the seismic data, a well was drilled into the northern mound trend in the project area. This well, Roadrunner No.9-2, was brought into production in late April 2006 and continues to produce modest amounts of oil and gas. As of the end of August 2007, the well has produced approximately 12,000 barrels of oil and 32,000 mcf of gas. A static reservoir model was created from the seismic data interpretations and well data. The seismic data was tied to various markers identified in the well logs, which in turn were related to lithostratigraphy. The tops and thicknesses of the various units were extrapolated from well control based upon the seismic data that was calibrated to the well picks. The reservoir engineering properties were available from a number of wel

Joe Hachey

2007-09-30T23:59:59.000Z

6

Desiccant-Based Combined Systems  

E-Print Network [OSTI]

and Testing Final Report Phase 4 August 2004 By J. Fischer SEMCO J. Sand Oak Ridge National Laboratory #12 System Development and Testing Final Report: Phase 4 August 2004 J. Fischer SEMCO, Inc. J. Sand Oak Ridge by UT-BATTELLE, LLC for the U.S. DEPARTMENT OF ENERGY under contract DE-AC05-00OR22725 #12;#12;iii

Oak Ridge National Laboratory

7

Ultrashort echo time (UTE) imaging using gradient pre-equalization and compressed sensing  

E-Print Network [OSTI]

image was approximately 4 min with a TE of 3 ms. The UTE reconstruction in of approximately 2 min with a TE of 10 ls. The reconstruction in (d) used only 32 in with the TE remaining at 10 ls. All images are shown with a field of view of ess. sequence...

Fabich, Hilary T.; Benning, Martin; Sederman, Andrew J.; Holland, Daniel J.

2014-06-27T23:59:59.000Z

8

Fuel-Flexible Microturbine and Gasifier System for Combined Heat...  

Broader source: Energy.gov (indexed) [DOE]

Flexible Microturbine and Gasifier System for Combined Heat and Power Fuel-Flexible Microturbine and Gasifier System for Combined Heat and Power Capstone Turbine Corporation, in...

9

Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact Sheet, 2011 Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact Sheet, 2011 FuelCell Energy, Inc., in...

10

Development of an Advanced Combined Heat and Power (CHP) System...  

Broader source: Energy.gov (indexed) [DOE]

an Advanced Combined Heat and Power (CHP) System Utilizing Off-Gas from Coke Calcination - Fact Sheet, 2011 Development of an Advanced Combined Heat and Power (CHP) System...

11

Ultra Efficient Combined Heat, Hydrogen, and Power System - Presentati...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ultra Efficient Combined Heat, Hydrogen, and Power System - Presentation by FuelCell Energy, June 2011 Ultra Efficient Combined Heat, Hydrogen, and Power System - Presentation by...

12

Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact...  

Energy Savers [EERE]

Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact Sheet, 2015 Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact Sheet, 2015 FuelCell Energy, Inc., in...

13

Combined hydraulic and regenerative braking system  

DOE Patents [OSTI]

A combined hydraulic and regenerative braking system and method for an electric vehicle, with the braking system being responsive to the applied hydraulic pressure in a brake line to control the braking of the vehicle to be completely hydraulic up to a first level of brake line pressure, to be partially hydraulic at a constant braking force and partially regenerative at a linearly increasing braking force from the first level of applied brake line pressure to a higher second level of brake line pressure, to be partially hydraulic at a linearly increasing braking force and partially regenerative at a linearly decreasing braking force from the second level of applied line pressure to a third and higher level of applied line pressure, and to be completely hydraulic at a linearly increasing braking force from the third level to all higher applied levels of line pressure.

Venkataperumal, Rama R. (Troy, MI); Mericle, Gerald E. (Mount Clemens, MI)

1981-06-02T23:59:59.000Z

14

MULTICOMPONENT SEISMIC ANALYSIS AND CALIBRATION TO IMPROVE RECOVERY FROM ALGAL MOUNDS: APPLICATION TO THE ROADRUNNER/TOWAOC AREA OF THE PARADOX BASIN, UTE MOUNTAIN UTE RESERVATION, COLORADO  

SciTech Connect (OSTI)

This report describes the results made in fulfillment of contract DE-FG26-02NT15451, ''Multicomponent Seismic Analysis and Calibration to Improve Recovery from Algal Mounds: Application to the Roadrunner/Towaoc Area of the Paradox Basin, Ute Mountain Ute Reservation, Colorado''. Optimizing development of highly heterogeneous reservoirs where porosity and permeability vary in unpredictable ways due to facies variations can be challenging. An important example of this is in the algal mounds of the Lower and Upper Ismay reservoirs of the Paradox Basin in Utah and Colorado. It is nearly impossible to develop a forward predictive model to delineate regions of better reservoir development, and so enhanced recovery processes must be selected and designed based upon data that can quantitatively or qualitatively distinguish regions of good or bad reservoir permeability and porosity between existing well control. Recent advances in seismic acquisition and processing offer new ways to see smaller features with more confidence, and to characterize the internal structure of reservoirs such as algal mounds. However, these methods have not been tested. This project will acquire cutting edge, three-dimensional, nine-component (3D9C) seismic data and utilize recently-developed processing algorithms, including the mapping of azimuthal velocity changes in amplitude variation with offset, to extract attributes that relate to variations in reservoir permeability and porosity. In order to apply advanced seismic methods a detailed reservoir study is needed to calibrate the seismic data to reservoir permeability, porosity and lithofacies. This will be done by developing a petrological and geological characterization of the mounds from well data; acquiring and processing the 3D9C data; and comparing the two using advanced pattern recognition tools such as neural nets. In addition, should the correlation prove successful, the resulting data will be evaluated from the perspective of selecting alternative enhanced recovery processes, and their possible implementation. The work is being carried out on the Roadrunner/Towaoc Fields of the Ute Mountain Ute Tribe, located in the southwestern corner of Colorado. Although this project is focused on development of existing resources, the calibration established between the reservoir properties and the 3D9C seismic data can also enhance exploration success. During the time period covered by this report, the majority of the project effort has gone into the permitting, planning and design of the 3D seismic survey, and to select a well for the VSP acquisition. The business decision in October, 2002 by WesternGeco, the projects' seismic acquisition contractor, to leave North America, has delayed the acquisition until late summer, 2003. The project has contracted Solid State, a division of Grant Geophysical, to carry out the acquisition. Moreover, the survey has been upgraded to a 3D9C from the originally planned 3D3C survey, which should provide even greater resolution of mounds and internal mound structure.

Paul La Pointe; Claudia Rebne; Steve Dobbs

2003-07-10T23:59:59.000Z

15

Improved UTE-based attenuation correction for cranial PET-MR using dynamic magnetic field monitoring  

SciTech Connect (OSTI)

Purpose: Ultrashort echo time (UTE) MRI has been proposed as a way to produce segmented attenuation maps for PET, as it provides contrast between bone, air, and soft tissue. However, UTE sequences require samples to be acquired during rapidly changing gradient fields, which makes the resulting images prone to eddy current artifacts. In this work it is demonstrated that this can lead to misclassification of tissues in segmented attenuation maps (AC maps) and that these effects can be corrected for by measuring the true k-space trajectories using a magnetic field camera. Methods: The k-space trajectories during a dual echo UTE sequence were measured using a dynamic magnetic field camera. UTE images were reconstructed using nominal trajectories and again using the measured trajectories. A numerical phantom was used to demonstrate the effect of reconstructing with incorrect trajectories. Images of an ovine leg phantom were reconstructed and segmented and the resulting attenuation maps were compared to a segmented map derived from a CT scan of the same phantom, using the Dice similarity measure. The feasibility of the proposed method was demonstrated inin vivo cranial imaging in five healthy volunteers. Simulated PET data were generated for one volunteer to show the impact of misclassifications on the PET reconstruction. Results: Images of the numerical phantom exhibited blurring and edge artifacts on the bone–tissue and air–tissue interfaces when nominal k-space trajectories were used, leading to misclassification of soft tissue as bone and misclassification of bone as air. Images of the tissue phantom and thein vivo cranial images exhibited the same artifacts. The artifacts were greatly reduced when the measured trajectories were used. For the tissue phantom, the Dice coefficient for bone in MR relative to CT was 0.616 using the nominal trajectories and 0.814 using the measured trajectories. The Dice coefficients for soft tissue were 0.933 and 0.934 for the nominal and measured cases, respectively. For air the corresponding figures were 0.991 and 0.993. Compared to an unattenuated reference image, the mean error in simulated PET uptake in the brain was 9.16% when AC maps derived from nominal trajectories was used, with errors in the SUV{sub max} for simulated lesions in the range of 7.17%–12.19%. Corresponding figures when AC maps derived from measured trajectories were used were 0.34% (mean error) and ?0.21% to +1.81% (lesions). Conclusions: Eddy current artifacts in UTE imaging can be corrected for by measuring the true k-space trajectories during a calibration scan and using them in subsequent image reconstructions. This improves the accuracy of segmented PET attenuation maps derived from UTE sequences and subsequent PET reconstruction.

Aitken, A. P.; Giese, D.; Tsoumpas, C.; Schleyer, P.; Kozerke, S.; Prieto, C.; Schaeffter, T., E-mail: Tobias.Schaeffter@kcl.ac.uk [Department of Biomedical Engineering, Division of Imaging Sciences and Biomedical Engineering, King's College London, King's Health Partners, St. Thomas Hospital, London SE1 7EH (United Kingdom)

2014-01-15T23:59:59.000Z

16

GUIDELINES FOR CERTIFICATION OF COMBINED HEAT AND POWER SYSTEMS  

E-Print Network [OSTI]

CALIFORNIA ENERGY COMMISSION GUIDELINES FOR CERTIFICATION OF COMBINED HEAT AND POWER SYSTEMS for Certification of Combined Heat and Power Systems Pursuant to the Waste Heat and Carbon Emissions Reduction Act Heat and Power System Pursuant to the Waste Heat and Carbon Emissions Reduction Act, Public Utilities

17

Combined Heat and Power System Enables 100% Reliability at Leading...  

Broader source: Energy.gov (indexed) [DOE]

Enables 100% Reliability at Leading Medical Campus - Case Study, 2013 Combined Heat and Power System Enables 100% Reliability at Leading Medical Campus - Case Study, 2013 Thermal...

18

Combined Heat and Power System Achieves Millions in Cost Savings...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Achieves Millions in Cost Savings at Large University - Case Study, 2013 Combined Heat and Power System Achieves Millions in Cost Savings at Large University - Case Study, 2013...

19

Application Study on Combined Ventilation System of Improving IAQ  

E-Print Network [OSTI]

A type of combined ventilating system is put forward in this paper. Through CFD simulation and testing of contaminant concentrations in a prototype residential room, the results demonstrate that the new ventilating system is advantageous...

Hu, S.; Li, G.; Zhang, C.; Ye, B.

2006-01-01T23:59:59.000Z

20

Solar air heating system for combined DHW and space heating  

E-Print Network [OSTI]

Solar air heating system for combined DHW and space heating solar air collector PV-panel fannon-return valve DHW tank mantle cold waterhot water roof Solar Energy Centre Denmark Danish Technological Institute SEC-R-29 #12;Solar air heating system for combined DHW and space heating SĂžren Ă?stergaard Jensen

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

Concentrating Solar Combined Heat and Power Systemfor Distributed Concentrating Solar Combined Heat and Powerof solar combined heat and power systems . . . . . . .

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

22

Fossil fuel combined cycle power system  

DOE Patents [OSTI]

A system for converting fuel energy to electricity includes a reformer for converting a higher molecular weight gas into at least one lower molecular weight gas, at least one turbine to produce electricity from expansion of at least one of the lower molecular weight gases, and at least one fuel cell. The system can further include at least one separation device for substantially dividing the lower molecular weight gases into at least two gas streams prior to the electrochemical oxidization step. A nuclear reactor can be used to supply at least a portion of the heat the required for the chemical conversion process.

Labinov, Solomon Davidovich; Armstrong, Timothy Robert; Judkins, Roddie Reagan

2006-10-10T23:59:59.000Z

23

COMBINING STATED AND REVEALED CHOICE RESEARCH TO INFORM ENERGY SYSTEM  

E-Print Network [OSTI]

Energy System Simulation Models: The Case of Hybrid Electric Vehicles Report Number: 409 ExaminingCOMBINING STATED AND REVEALED CHOICE RESEARCH TO INFORM ENERGY SYSTEM SIMULATION MODELS: THE CASE parameters for a hybrid energy-economy model (called CIMS) using empirically derived choice models based

24

The effect of excitation and preparation pulses on nonslice selective 2D UTE bicomponent analysis of bound and free water in cortical bone at 3T  

SciTech Connect (OSTI)

Purpose: The purpose of this study was to investigate the effect of excitation, fat saturation, long T2 saturation, and adiabatic inversion pulses on ultrashort echo time (UTE) imaging with bicomponent analysis of bound and free water in cortical bone for potential applications in osteoporosis. Methods: Six bovine cortical bones and six human tibial midshaft samples were harvested for this study. Each bone sample was imaged with eight sequences using 2D UTE imaging at 3T with half and hard excitation pulses, without and with fat saturation, long T2 saturation, and adiabatic inversion recovery (IR) preparation pulses. Single- and bicomponent signal models were utilized to calculate the T2{sup *}s and/or relative fractions of short and long T2{sup *}s. Results: For all bone samples UTE T2{sup *} signal decay showed bicomponent behavior. A higher short T2{sup *} fraction was observed on UTE images with hard pulse excitation compared with half pulse excitation (75.6% vs 68.8% in bovine bone, 79.9% vs 73.2% in human bone). Fat saturation pulses slightly reduced the short T2{sup *} fraction relative to regular UTE sequences (5.0% and 2.0% reduction, respectively, with half and hard excitation pulses for bovine bone, 6.3% and 8.2% reduction, respectively, with half and hard excitation pulses for human bone). Long T2 saturation pulses significantly reduced the long T2{sup *} fraction relative to regular UTE sequence (18.9% and 17.2% reduction, respectively, with half and hard excitation pulses for bovine bone, 26.4% and 27.7% reduction, respectively, with half and hard excitation pulses for human bone). With IR-UTE preparation the long T2{sup *} components were significantly reduced relative to regular UTE sequence (75.3% and 66.4% reduction, respectively, with half and hard excitation pulses for bovine bone, 87.7% and 90.3% reduction, respectively, with half and hard excitation pulses for human bone). Conclusions: Bound and free water T2{sup *}s and relative fractions can be assessed using UTE bicomponent analysis. Long T2{sup *} components are affected more by long T2 saturation and IR pulses, and short T2{sup *} components are affected more by fat saturation pulses.

Li, Shihong [Department of Radiology, University of California, San Diego, California 92103-8226 (United States) [Department of Radiology, University of California, San Diego, California 92103-8226 (United States); Department of Radiology, Hua Dong Hospital, Fudan University, Shanghai 200040 (China); Yancheng Medical College, Jiangsu (China); The First People's Hospital of Yancheng City, Jiangsu 224005 (China); Chang, Eric Y.; Chung, Christine B. [VA San Diego Healthcare System, San Diego, California 92161 and Department of Radiology, University of California, San Diego, California 92103-8226 (United States)] [VA San Diego Healthcare System, San Diego, California 92161 and Department of Radiology, University of California, San Diego, California 92103-8226 (United States); Bae, Won C.; Du, Jiang, E-mail: jiangdu@ucsd.edu [Department of Radiology, University of California, San Diego, California 92103-8226 (United States)] [Department of Radiology, University of California, San Diego, California 92103-8226 (United States); Hua, Yanqing [Department of Radiology, Hua Dong Hospital, Fudan University, Shanghai 200040 (China)] [Department of Radiology, Hua Dong Hospital, Fudan University, Shanghai 200040 (China); Zhou, Yi [The First People's Hospital of Yancheng City, Jiangsu 224005 (China)] [The First People's Hospital of Yancheng City, Jiangsu 224005 (China)

2014-02-15T23:59:59.000Z

25

Adaptive security systems -- Combining expert systems with adaptive technologies  

SciTech Connect (OSTI)

The Adaptive Multisensor Integrated Security System (AMISS) uses a variety of computational intelligence techniques to reason from raw sensor data through an array of processing layers to arrive at an assessment for alarm/alert conditions based on human behavior within a secure facility. In this paper, the authors give an overview of the system and briefly describe some of the major components of the system. This system is currently under development and testing in a realistic facility setting.

Argo, P.; Loveland, R.; Anderson, K. [and others

1997-09-01T23:59:59.000Z

26

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

combined heat and power systems. ASME Conference Proceedingsfor combined heat and power applications. ASME ConferenceRankine combined heat and power technology. ASME Conference

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

27

Retrofitting Combined Space and Water Heating Systems: Laboratory Tests  

SciTech Connect (OSTI)

Better insulated and tighter homes can often use a single heating plant for both space and domestic water heating. These systems, called dual integrated appliances (DIA) or combination systems, can operate at high efficiency and eliminate combustion safety issues associated by using a condensing, sealed combustion heating plant. Funds were received to install 400 DIAs in Minnesota low-income homes. The NorthernSTAR DIA laboratory was created to identify proper system components, designs, operating parameters, and installation procedures to assure high efficiency of field installed systems. Tests verified that heating loads up to 57,000 Btu/hr can be achieved with acceptable return water temperatures and supply air temperatures.

Schoenbauer, B.; Bohac, D.; Huelman, P.; Olson, R.; Hewitt, M.

2012-10-01T23:59:59.000Z

28

Re-formulation of combined system wave-function formalism  

E-Print Network [OSTI]

We introduce a formulation of combined systems in orthodox non-relativistic quantum mechanics, mathematically equivalent to the usual one. For context and larger issues, see http://euclid.unh.edu/~jjohnson/axiomatics.html and http://arxiv.org/quant-ph/0502124

Joseph F. Johnson

2006-04-02T23:59:59.000Z

29

Combining Tools for the Verification of FaultTolerant Systems  

E-Print Network [OSTI]

and verification of fault­tolerant systems according to the invent&verify paradigm. Our method is based on the CSP specifications (CSP process terms), refinement relations or combinations of these three description formalisms specification paradigms ac­ cording to the specific needs of each development step is essential to cope

Peleska, Jan - Fachbereich 3

30

Ultrarelativistic laser systems based on coherent beam combining  

SciTech Connect (OSTI)

Conceptual design for femtosecond laser system of exawatt class, based on multi-channel amplifier and coherent field combining of petawatt amplifier channels with phase-frequency controlled radiation by optical clock are discussed. The scheme of start petawatt level few-cycle laser system with stable phase-frequency parameters determinated by the accuracy of the optical standard based on parametric amplification in big-size LBO crystals pumped by picosecond pulses is analyzed.

Bagayev, S. N.; Trunov, V. I.; Pestryakov, E. V.; Frolov, S. A.; Leschenko, V. E.; Kirpichnikov, A. V.; Kokh, A. E.; Petrov, V. V.; Vasiliev, V. A. [Institute of Laser Physics SB RAS, Ac. Lavrentyev's prosp., 13/3, Novosibirsk (Russian Federation); Institute of Geology and Mineralogy SB RAS, Ac. Koptug's prosp., 3, Novosibirsk (Russian Federation); Institute of Laser Physics SB RAS, Ac. Lavrentyev's prosp., 13/3, Novosibirsk (Russian Federation)

2012-07-11T23:59:59.000Z

31

Guide to Combined Heat and Power Systems for Boiler Owners and...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power Systems for Boiler Owners and Operators Guide to Combined Heat and Power Systems for Boiler Owners and Operators This guide presents useful information for...

32

Nova DAQ, System Architecture, Data Combiner and Timing System  

SciTech Connect (OSTI)

NOvA (E929) is a long baseline experiment that will search for neutrino oscillations. There will be one detector near the beam source at Fermilab, and one detector in northern Minnesota. The DAQ system for the far detector collects over-threshold hits from over 450,000 channels of scintillator readouts, sorts the time-stamped data packets and archives selected time periods of data for transmission and processing. While a simple point-to-point protocol is used for the first level of data collection, Ethernet was chosen as the fabric for the rest of the DAQ. The packet time-stamp and overall system synchronization is based on two common-view GPS trained clock oscillators, one at each site. The present design cost-effectively satisfies the experiment's moderate speed and data volume requirements.

Biery, K.A.; Cooper, R.G.; Foulkes, S.C.; Guglielmo, G.M.; Haynes, B.W.; Kwarciany, R.; Pavlicek, F.V.; Piccoli, L.P.; Votava, M.E.V.; /Fermilab

2007-04-01T23:59:59.000Z

33

Evaluation of diurnal thermal energy storage combined with cogeneration systems  

SciTech Connect (OSTI)

This report describes the results of an evaluation of thermal energy storage (TES) integrated with simple gas turbine cogeneration systems. The TES system captures and stores thermal energy from the gas turbine exhaust for immediate or future generation of process heat. Integrating thermal energy storage with conventional cogeneration equipment increases the initial cost of the combined system; but, by decoupling electric power and process heat production, the system offers the following two significant advantages: (1) Electric power can be generated on demand, irrespective of the process heat load profile, thus increasing the value of the power produced; (2) Although supplementary firing could be used to serve independently varying electric and process heat loads, this approach is inefficient. Integrating TES with cogeneration can serve the two independent loads while firing all fuel in the gas turbine. The study evaluated the cost of power produced by cogeneration and cogeneration/TES systems designed to serve a fixed process steam load. The value of the process steam was set at the levelized cost estimated for the steam from a conventional stand-alone boiler. Power costs for combustion turbine and combined-cycle power plants were also calculated for comparison. The results indicated that peak power production costs for the cogeneration/TES systems were between 25% and 40% lower than peak power costs estimated for a combustion turbine and between 15% and 35% lower than peak power costs estimated for a combined-cycle plant. The ranges reflect differences in the daily power production schedule and process steam pressure/temperature assumptions for the cases evaluated. Further cost reductions may result from optimization of current cogeneration/TES system designs and improvement in TES technology through future research and development.

Somasundaram, S.; Brown, D.R.; Drost, M.K.

1992-11-01T23:59:59.000Z

34

INTEGRATED PYROLYSIS COMBINED CYCLE BIOMASS POWER SYSTEM CONCEPT DEFINITION  

SciTech Connect (OSTI)

Advanced power systems based on integrated gasification/combined cycles (IGCC) are often presented as a solution to the present shortcomings of biomass as fuel. Although IGCC has been technically demonstrated at full scale, it has not been adopted for commercial power generation. Part of the reason for this situation is the continuing low price for coal. However, another significant barrier to IGCC is the high level of integration of this technology: the gas output from the gasifier must be perfectly matched to the energy demand of the gas turbine cycle. We are developing an alternative to IGCC for biomass power: the integrated (fast) pyrolysis/ combined cycle (IPCC). In this system solid biomass is converted into liquid rather than gaseous fuel. This liquid fuel, called bio-oil, is a mixture of oxygenated organic compounds and water that serves as fuel for a gas turbine topping cycle. Waste heat from the gas turbine provides thermal energy to the steam turbine bottoming cycle. Advantages of the biomass-fueled IPCC system include: combined cycle efficiency exceeding 37 percent efficiency for a system as small as 7.6 MW{sub e}; absence of high pressure thermal reactors; decoupling of fuel processing and power generation; and opportunities for recovering value-added products from the bio-oil. This report provides a technical overview of the system including pyrolyzer design, fuel clean-up strategies, pyrolysate condenser design, opportunities for recovering pyrolysis byproducts, gas turbine cycle design, and Rankine steam cycle. The report also reviews the potential biomass fuel supply in Iowa, provide and economic analysis, and present a summery of benefits from the proposed system.

Eric Sandvig; Gary Walling; Robert C. Brown; Ryan Pletka; Desmond Radlein; Warren Johnson

2003-03-01T23:59:59.000Z

35

WORKING PARK-FUEL CELL COMBINED HEAT AND POWER SYSTEM  

SciTech Connect (OSTI)

This report covers the aims and objectives of the project which was to design, install and operate a fuel cell combined heat and power (CHP) system in Woking Park, the first fuel cell CHP system in the United Kingdom. The report also covers the benefits that were expected to accrue from the work in an understanding of the full technology procurement process (including planning, design, installation, operation and maintenance), the economic and environmental performance in comparison with both conventional UK fuel supply and conventional CHP and the commercial viability of fuel cell CHP energy supply in the new deregulated energy markets.

Allan Jones

2003-09-01T23:59:59.000Z

36

Lighting system combining daylight concentrators and an artificial source  

DOE Patents [OSTI]

A combined lighting system for a building interior includes a stack of luminescent solar concentrators (LSC), an optical conduit made of preferably optical fibers for transmitting daylight from the LSC stack, a collimating lens set at an angle, a fixture for receiving the daylight at one end and for distributing the daylight as illumination inside the building, an artificial light source at the other end of the fixture for directing artifical light into the fixture for distribution as illumination inside the building, an automatic dimmer/brightener for the artificial light source, and a daylight sensor positioned near to the LSC stack for controlling the automatic dimmer/brightener in response to the daylight sensed. The system also has a reflector positioned behind the artificial light source and a fan for exhausting heated air out of the fixture during summer and for forcing heated air into the fixture for passage into the building interior during winter.

Bornstein, Jonathan G. (Miami, FL); Friedman, Peter S. (Toledo, OH)

1985-01-01T23:59:59.000Z

37

Combined Heat and Power Systems (CHP): Capabilities (Fact Sheet)  

SciTech Connect (OSTI)

D&MT Capabilities fact sheet that describes the NREL capabilities related to combined heat and power (CHP).

Not Available

2013-07-01T23:59:59.000Z

38

Guide to Combined Heat and Power Systems for Boiler Owners and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Guide to Combined Heat and Power Systems for Boiler Owners and Operators, July 2004 Guide to Combined Heat and Power Systems for Boiler Owners and Operators, July 2004 Many owners...

39

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System Combined Heat and Power System by Zachary Mills Norwood Doctor of Philosophy in the Energy and Resources of analysis of Distributed Concentrating Solar Combined Heat and Power (DCS-CHP) systems is a design

California at Berkeley, University of

40

Combination of Diesel fuel system architectures and Ceria-based...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Diesel fuel system architectures and Ceria-based fuel-borne catalysts for improvement and simplification of the Diesel Particulate Filter System in serial applications...

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

A new power combining and outphasing modulation system for high-efficiency power amplification  

E-Print Network [OSTI]

This paper describes a new power combining and outphasing system that provides both high efficiency and linear output control. Whereas conventional outphasing systems utilize two power amplifiers, the system introduced ...

Perreault, David J.

42

A New Power Combining and Outphasing Modulation System for High-Efficiency Power Amplification  

E-Print Network [OSTI]

This paper describes a new power combining and outphasing system that provides both high efficiency and linear output control. Whereas conventional outphasing systems utilize two power amplifiers, the system introduced ...

Perreault, David J.

43

Combined Flue Gas Heat Recovery and Pollution Control Systems  

E-Print Network [OSTI]

in the field of heat recovery now make it possible to recover a portion of the wasted heat and improve the working conditions of the air purification equipment. Proper design and selection of heat recovery and pollution control equipment as a combination...

Zbikowski, T.

1979-01-01T23:59:59.000Z

44

Combined permeable pavement and ground source heat pump systems   

E-Print Network [OSTI]

The PhD thesis focuses on the performance assessment of permeable pavement systems incorporating ground source heat pumps (GSHP). The relatively high variability of temperature in these systems allows for the survival of pathogenic organisms within...

Grabowiecki, Piotr

2010-01-01T23:59:59.000Z

45

Combination of Diesel fuel system architectures and Ceria-based...  

Broader source: Energy.gov (indexed) [DOE]

Vehicle Integrations Diesel Particulate Filter On-Board Eolys(tm) tank Conclusions Acknowledgement 3 Content of presentation Introduction Global DPF System Approach Ceria-Based...

46

assay system combining: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

cooling requirement can be met using various optional refrigeration technologies in a CCHP system, including compression refrigeration, steam double-effect absorption...

47

Standby Rates for Combined Heat and Power Systems  

SciTech Connect (OSTI)

Improvements in technology, low natural gas prices, and more flexible and positive attitudes in government and utilities are making distributed generation more viable. With more distributed generation, notably combined heat and power, comes an increase in the importance of standby rates, the cost of services utilities provide when customer generation is not operating or is insufficient to meet full load. This work looks at existing utility standby tariffs in five states. It uses these existing rates and terms to showcase practices that demonstrate a sound application of regulatory principles and ones that do not. The paper also addresses areas for improvement in standby rates.

Sedano, Richard [Regulatory Assistance Partnership; Selecky, James [Brubaker & Associates, Inc.; Iverson, Kathryn [Brubaker & Associates, Inc.; Al-Jabir, Ali [Brubaker & Associates, Inc.

2014-02-01T23:59:59.000Z

48

IMKA: A Multimedia Organization System Combining Perceptual and Semantic Knowledge  

E-Print Network [OSTI]

-914-784-7320 jrsmith@watson.ibm.com ABSTRACT In this demo, we present the IMKA system, which implements the innovative extends existing knowledge representation tools in the text domain (e.g., semantic networks and Word, and enhanced searching using relevance feedback from users. However, existing systems still lack adequate

Chang, Shih-Fu

49

Thermodynamic Analysis of Combined Cycle District Heating System  

E-Print Network [OSTI]

generation systems that include a 10 MW Solar combustion gas turbine, a 4-MW steam turbine, a 100,000 pph heat recovery steam generator (HRSG), three 125,000 pph package boilers, and auxiliary equipment. In the analysis, actual system data is used to assess...

Suresh, S.; Gopalakrishnan, H.; Kosanovic, D.

2011-01-01T23:59:59.000Z

50

A Preliminary Study on Designing Combined Heat and Power (CHP) System for the University Environment  

E-Print Network [OSTI]

Combined heat and power (CHP) systems are an evolving technology that is at the front of the energy conservation movement. With the reduction in energy consumption and green house gas emissions, CHP systems are improving the efficiency of power...

Kozman, T. A.; Reynolds, C. M.; Lee, J.

2008-01-01T23:59:59.000Z

51

Optimal Energy Management for a Hybrid Energy Storage System Combining Batteries and Double  

E-Print Network [OSTI]

Optimal Energy Management for a Hybrid Energy Storage System Combining Batteries and Double Layer storage for operation. High demands concerning power and energy density, small volume and weight is to combine storage technologies with complementary characteristics as a hybrid energy storage system. Thus

Paderborn, UniversitÀt

52

Combining Graphics and Layout Language i n a Sing1e Interactive System  

E-Print Network [OSTI]

Combining Graphics and Layout Language i n a Sing1e Interactive System by Stephen Trimberger. Copyright, California Institute of Technology, 1980 #12;Combining Graphics and Layout Language in a Single a design in that language, one must plot it. Interactive graphics systems, on the other hand, allow

53

Combining Unit-level Symbolic Execution and System-level Concrete Execution for Testing NASA  

E-Print Network [OSTI]

Combining Unit-level Symbolic Execution and System-level Concrete Execution for Testing NASA-level concrete execution for generating test cases that satisfy user-specified testing criteria. We have to testing complex safety critical software that combines unit-level symbolic execution and system

Pasareanu, Corina

54

Commissioning Residential Ventilation Systems: A Combined Assessment of  

E-Print Network [OSTI]

, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product use and improving indoor air quality (IAQ) is poorly understood. Commissioning such systems when

55

Combined goal gasifier and fuel cell system and method  

DOE Patents [OSTI]

A molten carbonate fuel cell is combined with a catalytic coal or coal char gasifier for providing the reactant gases comprising hydrogen, carbon monoxide and carbon dioxide used in the operation of the fuel cell. These reactant gases are stripped of sulfur compounds and particulate material and are then separated in discrete gas streams for conveyance to appropriate electrodes in the fuel cell. The gasifier is arranged to receive the reaction products generated at the anode of the fuel cell by the electricity-producing electrochemical reaction therein. These reaction products from the anode are formed primarily of high temperature steam and carbon dioxide to provide the steam, the atmosphere and the heat necessary to endothermically pyrolyze the coal or char in the presence of a catalyst. The reaction products generated at the cathode are substantially formed of carbon dioxide which is used to heat air being admixed with the carbon dioxide stream from the gasifier for providing the oxygen required for the reaction in the fuel cell and for driving an expansion device for energy recovery. A portion of this carbon dioxide from the cathode may be recycled into the fuel cell with the air-carbon dioxide mixture.

Gmeindl, Frank D. (Morgantown, WV); Geisbrecht, Rodney A. (New Alexandria, PA)

1990-01-01T23:59:59.000Z

56

Combined Heat and Power (CHP) Systems | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power Systems EngineeringDepartment of4CenterPointChristinaClayCoal toEnergyOffice of

57

Novel Controls for Economic Dispatch of Combined Cooling, Heating and Power (CCHP) Systems  

Broader source: Energy.gov [DOE]

The emergence of technologies that efficiently convert heat into cooling, such as absorption chillers, has opened up many new opportunities and markets for combined heat and power systems. These...

58

BornOppenheimer breakdown in a combined-isotopomer analysis system of Li2  

E-Print Network [OSTI]

of 6,7 Li2 , and new Fourier transform data for the homonuclear lithium dimers. They are combined nonhydride systems for studying such interactions. Moreover, in view of the prominence of Li2 in studies

Le Roy, Robert J.

59

Experimental Study of the Floor Radiant Cooling System Combined with Displacement Ventilation  

E-Print Network [OSTI]

ICEBO2006, Shenzhen, China HVAC Technologies for Energy Efficiency, Vol. IV-11-4 Experimental Study of the Floor Radiant Cooling System Combined with Displacement Ventilation Yanli Ren1, Deying Li2, Yufeng Zhang1 1...

Ren, Y.; Li, D.; Zhang, Y.

2006-01-01T23:59:59.000Z

60

The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems analysis, fluid  

E-Print Network [OSTI]

32 The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems analysis, fluid mechanics) with the life sciences (biology, physiology, biochemistry) to define and solve problems in biology and medicine. Students choose this growing branch of engineering

Rohs, Remo

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Expert Meeting Report: Recommendations for Applying Water Heaters in Combination Space and Domestic Water Heating Systems  

SciTech Connect (OSTI)

The topic of this meeting was 'Recommendations For Applying Water Heaters In Combination Space And Domestic Water Heating Systems.' Presentations and discussions centered on the design, performance, and maintenance of these combination systems, with the goal of developing foundational information toward the development of a Building America Measure Guideline on this topic. The meeting was held at the Westford Regency Hotel, in Westford, Massachusetts on 7/31/2011.

Rudd, A.; Ueno, K.; Bergey, D.; Osser, R.

2012-07-01T23:59:59.000Z

62

ITP Industrial Distributed Energy: Combined Heat & Power Multifamily Performance Program-- Sea Park East 150 kW CHP System  

Broader source: Energy.gov [DOE]

Overview of Sea Park East 150 kilowatt (kW) Combined Heat and Power (CHP) System in Brooklyn, New York

63

EA-1922: Combined Power and Biomass Heating System, Fort Yukon, Alaska  

Broader source: Energy.gov [DOE]

DOE (lead agency), Denali Commission (cooperating agency) and USDA Rural Utilities Services (cooperating agency) are proposing to provide funding to support the final design and construction of a biomass combined heat and power plant and associated district heating system to the Council of Athabascan Tribal Governments and the Gwitchyaa Zhee Corporation. The proposed biomass district heating system would be located in Fort Yukon Alaska.

64

Evaluation of diurnal thermal energy storage combined with cogeneration systems. Phase 2  

SciTech Connect (OSTI)

This report describes the results of a study of thermal energy storage (TES) systems integrated with combined-cycle gas turbine cogeneration systems. Integrating thermal energy storage with conventional cogeneration equipment increases the initial cost of the combined system; but, by decoupling electric power and process heat production, the system offers two significant advantages. First, electric power can be generated on demand, irrespective of the process heat load profile, thus increasing the value of the power produced. Second, although supplementary firing could be used to serve independently varying electric and process heat loads, this approach is inefficient. Integrating TES with cogeneration can serve the two independent loads while firing all fuel in the gas turbine. An earlier study analyzed TES integrated with a simple-cycle cogeneration system. This follow-on study evaluated the cost of power produced by a combined-cycle electric power plant (CC), a combined-cycle cogeneration plant (CC/Cogen), and a combined-cycle cogeneration plant integrated with thermal energy storage (CC/TES/Cogen). Each of these three systems was designed to serve a fixed (24 hr/day) process steam load. The value of producing electricity was set at the levelized cost for a CC plant, while the value of the process steam was for a conventional stand-alone boiler. The results presented here compared the costs for CC/TES/Cogen system with those of the CC and the CC/Cogen plants. They indicate relatively poor economic prospects for integrating TES with a combined-cycle cogeneration power plant for the assumed designs. The major reason is the extremely close approach temperatures at the storage media heaters, which makes the heaters large and therefore expensive.

Somasundaram, S.; Brown, D.R.; Drost, M.K.

1993-07-01T23:59:59.000Z

65

Measure Guideline: Combination Forced-Air Space and Tankless Domestic Hot Water Heating Systems  

SciTech Connect (OSTI)

This document describes design and application guidance for combination space and tankless domestic hot water heating systems (combination systems) used in residential buildings, based on field evaluation, testing, and industry meetings conducted by Building Science Corporation. As residential building enclosure improvements continue to drive heating loads down, using the same water heating equipment for both space heating and domestic water heating becomes attractive from an initial cost and space-saving perspective. This topic is applicable to single- and multi-family residential buildings, both new and retrofitted.

Rudd, A.

2012-08-01T23:59:59.000Z

66

Holistic modelling of a combined Photovoltaic, Wind and Fuel Cell power system  

E-Print Network [OSTI]

Abstract – The research work presented in this paper is focused on the holistic modelling of a combined Photovoltaic (PV), Wind and Fuel Cell, (FC) power system. The modelling approach is based on the Handel C programming language and is using the DK5 modelling / design environment from Mentor Graphics. The aim of the research was to achieve a combined model of a photovoltaic – wind-fuel cell energy system, enabling an holistically optimized digital control system design, followed by its rapid Field Programmable Gate Array (FPGA) prototyping. Initially, the functional simulations of the integrated system were performed, than, the controller design was downloaded in hardware onto a RC10 development board containing a Xilinx Spartan FPGA and was successfully tested experimentally. This approach enables the design and fast hardware implementation of efficient controllers for Distributed Energy Resource (DER) hybrid systems.

A. Tisan; M. Cirstea

67

Apparatus and methods for supplying auxiliary steam in a combined cycle system  

DOE Patents [OSTI]

To provide auxiliary steam, a low pressure valve is opened in a combined cycle system to divert low pressure steam from the heat recovery steam generator to a header for supplying steam to a second combined cycle's steam turbine seals, sparging devices and cooling steam for the steam turbine if the steam turbine and gas turbine lie on a common shaft with the generator. Cooling steam is supplied the gas turbine in the combined cycle system from the high pressure steam turbine. Spent gas turbine cooling steam may augment the low pressure steam supplied to the header by opening a high pressure valve whereby high and low pressure steam flows are combined. An attemperator is used to reduce the temperature of the combined steam in response to auxiliary steam flows above a predetermined flow and a steam header temperature above a predetermined temperature. The auxiliary steam may be used to start additional combined cycle units or to provide a host unit with steam turbine cooling and sealing steam during full-speed no-load operation after a load rejection.

Gorman, William G. (Ballston Spa, NY); Carberg, William George (Ballston Spa, NY); Jones, Charles Michael (Ballston Lake, NY)

2002-01-01T23:59:59.000Z

68

REFORMING PROCESSES FOR MICRO COMBINED HEAT AND POWER SYSTEM BASED ON SOLID OXIDE FUEL CELL  

E-Print Network [OSTI]

REFORMING PROCESSES FOR MICRO COMBINED HEAT AND POWER SYSTEM BASED ON SOLID OXIDE FUEL CELL University Denmark ABSTRACT Solid oxide fuel cell (SOFC) is a promising technology for decentralized power be theoretically improved through integration in power cycles; the low emissions; and the pos- sibility of using

Berning, Torsten

69

Learning Dynamic Models of Compartment Systems by Combining Symbolic Regression with Fuzzy Vector  

E-Print Network [OSTI]

. Categories and Subject Descriptors I.2.1 [Pattern Recognition]: Models--Fuzzy Set; I.2.6 [ArtificialLearning Dynamic Models of Compartment Systems by Combining Symbolic Regression with Fuzzy Vector and fuzzy represen- tation. We need differential capabilities because, in a dy- namic environment, models

Fernandez, Thomas

70

A Multi-task Adaptive Monitoring System Combining Different Sampling Primitives  

E-Print Network [OSTI]

performance objective. It becomes then important to design a new system that combines different existing) an optimization method based on overhead prediction that allows to reconfigure monitors according to accuracy and management, accounting and anomaly detection. In order to cope with the increasing trend in line speed

Paris-Sud XI, Université de

71

A state, characteristics, and perspectives of the Czech combined heating and power (CHP) systems  

SciTech Connect (OSTI)

The combined production of electricity and heat is a significant method for saving primary energy sources like fossil fuels, as well as reducing the production of CO{sub 2} and its emission to the atmosphere. The paper discusses the total efficiency of combined heat and power generation (CHP), comparing various types of CHP plants. The paper then describes the situation in the Czech Republic with regard to their centralized heat supply. The author concludes that there is no simple way to rebuild the Czech CHP systems, and that it would be better to start construction on more modern plants. He lists several starting principles to follow in the planning and design stage.

Kadrnozka, J. [Technical Univ. of Brno (Czech Republic)

1994-12-31T23:59:59.000Z

72

Conceptual design and techno-economic assessment of integrated solar combined cycle system with DSG technology  

SciTech Connect (OSTI)

Direct steam generation (DSG) in parabolic trough collectors causes an increase to competitiveness of solar thermal power plants (STPP) by substitution of oil with direct steam generation that results in lower investment and operating costs. In this study the integrated solar combined cycle system with DSG technology is introduced and techno-economic assessment of this plant is reported compared with two conventional cases. Three considered cases are: an integrated solar combined cycle system with DSG technology (ISCCS-DSG), a solar electric generating system (SEGS), and an integrated solar combined cycle system with HTF (heat transfer fluid) technology (ISCCS-HTF). This study shows that levelized energy cost (LEC) for the ISCCS-DSG is lower than the two other cases due to reducing O and M costs and also due to increasing the heat to electricity net efficiency of the power plant. Among the three STPPs, SEGS has the lowest CO{sub 2} emissions, but it will operate during daytime only. (author)

Nezammahalleh, H.; Farhadi, F.; Tanhaemami, M. [Chemical and Petroleum Engineering Department, Sharif University of Technology, No 593 Azadi Ave., Tehran (Iran)

2010-09-15T23:59:59.000Z

73

Improving Domotic Services Combining a Dialog System and a Resident Tracking System  

E-Print Network [OSTI]

equip a house nowadays include: alarm systems, HVAC systems (Heating, Ventilation, and Air Conditioning, consider a lights remote control: if the resident has a wireless remote control with which he can control

Instituto de Sistemas e Robotica

74

Networked Windows NT System Field Failure Data Analysis Jun Xu, Zbigniew Kalbarczyk, Ravishankar K. Iyer  

E-Print Network [OSTI]

. Iyer Center for Reliable and High Performance Computing University of Illinois at Urbana-Champaign E techniques, (7) maintenance and configuration contrib- ute to 24% of system downtime. 1 Introduction are responsible for only 3% (system software) and 1% (hardware) of all observed reboots. · Planned maintenance

Wiseman, Yair

75

HEATMAP©CHP - The International Standard for Modeling Combined Heat and Power Systems  

E-Print Network [OSTI]

-CHP--central controlling program ? HEATMAP/AutoCAD Interface program ? HEATCALC--distribution network analysis program ? RELCOST-economic analysis program ? DOE-2 Plant Module-eentral plant. thermal storage and energy cost simulation program 114 ESL-IE-00... a comprehensive simuJation of proposed and existing combined heat and power (CHP) plant and system applications, The software model provides a fully integrated analysis of central power production plants that are linked to district energy...

Bloomquist, R. G.; O'Brien, R. G.

76

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM "PREMIUM POWER" APPLICATIONS IN CALIFORNIA  

E-Print Network [OSTI]

Modeling with Combined Heat and Power Applications. Lawrencegeneration, combined heat and power, and thermally drivenPacific Region Combined Heat and Power Application Center (

Norwood, Zack

2010-01-01T23:59:59.000Z

77

Solar's combined-cycle system utilizes novel steam-generator concept  

SciTech Connect (OSTI)

As escalating fuel costs force equipment users to seek more efficient prime movers, the combined-cycle system will become increasingly attractive because it retains the advantages of simple-cycle gas turbines - low installation costs, high availability, low maintenance, and low emission levels - while adding 40% power output from the steam-based system operated on the turbine exhaust. Solar Turbines International has sought to develop an automated, remote-control combined-cycle system that can be easily retrofitted to existing simple-cycle power stations. The key component giving the system its advantages over the hazardous, complex steam-drum-type boiler systems is a once-through dual-pressure steam-generator device that eliminates the need for drums and elaborate control mechanisms. Forty identical parallel tube circuits suspended from a single frame are connected to common inlet and discharge manifolds; the individual circuits are made of dual high- and low-pressure bundles, with each bundle having economizer, vaporizer, and superheating sections. The 40 circuits comprise one complete steam-generator module core matrix. By injecting the superheated low-pressure steam into the latter stages of the steam turbine, the dual-pressure feature improves the heat recovery by more than 12% over conventional devices. The only water treatment that the corrosion-resistant tube material requires is the removal of dissolved solids.

Not Available

1980-06-01T23:59:59.000Z

78

Review of combined photovoltaic/thermal collector: solar assisted heat pump system options  

SciTech Connect (OSTI)

The advantages of using photovoltaic (PV) and combined photovoltaic/thermal (PV/T) collectors in conjunction with residential heat pumps are examined. The thermal and electrical power requirements of similar residences in New York City and Fort Worth are the loads under consideration. The TRNSYS energy balance program is used to simulate the operations of parallel, series, and cascade solar assisted heat pump systems. Similar work involving exclusively thermal collectors is reviewed, and the distinctions between thermal and PV/T systems are emphasized. Provided the defrost problem can be satisfactorily controlled, lifecycle cost analyses show that at both locations the optimum collector area is less than 50 m/sup 2/ and that the parallel system is preferred.

Sheldon, D.B.; Russell, M.C.

1980-01-01T23:59:59.000Z

79

Method and system to estimate variables in an integrated gasification combined cycle (IGCC) plant  

DOE Patents [OSTI]

System and method to estimate variables in an integrated gasification combined cycle (IGCC) plant are provided. The system includes a sensor suite to measure respective plant input and output variables. An extended Kalman filter (EKF) receives sensed plant input variables and includes a dynamic model to generate a plurality of plant state estimates and a covariance matrix for the state estimates. A preemptive-constraining processor is configured to preemptively constrain the state estimates and covariance matrix to be free of constraint violations. A measurement-correction processor may be configured to correct constrained state estimates and a constrained covariance matrix based on processing of sensed plant output variables. The measurement-correction processor is coupled to update the dynamic model with corrected state estimates and a corrected covariance matrix. The updated dynamic model may be configured to estimate values for at least one plant variable not originally sensed by the sensor suite.

Kumar, Aditya; Shi, Ruijie; Dokucu, Mustafa

2013-09-17T23:59:59.000Z

80

Model predictive control system and method for integrated gasification combined cycle power generation  

DOE Patents [OSTI]

Control system and method for controlling an integrated gasification combined cycle (IGCC) plant are provided. The system may include a controller coupled to a dynamic model of the plant to process a prediction of plant performance and determine a control strategy for the IGCC plant over a time horizon subject to plant constraints. The control strategy may include control functionality to meet a tracking objective and control functionality to meet an optimization objective. The control strategy may be configured to prioritize the tracking objective over the optimization objective based on a coordinate transformation, such as an orthogonal or quasi-orthogonal projection. A plurality of plant control knobs may be set in accordance with the control strategy to generate a sequence of coordinated multivariable control inputs to meet the tracking objective and the optimization objective subject to the prioritization resulting from the coordinate transformation.

Kumar, Aditya; Shi, Ruijie; Kumar, Rajeeva; Dokucu, Mustafa

2013-04-09T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

Concentrating Solar Combined Heat and Power Systemfor Distributed Concentrating Solar Combined Heat and Powerin parabolic trough solar power technology. Journal of Solar

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

82

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies within Energy Systems  

E-Print Network [OSTI]

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies of Micro Combined Heat & Power Technologies within Energy Systems by Karen de los Ángeles Tapia for this purpose. Co-generation of electricity and heat at the residential level, known as micro

Catholic University of Chile (Universidad CatĂłlica de Chile)

83

COMBINED MICROBIAL SURFACTANT-POLYMER SYSTEM FOR IMPROVED OIL MOBILITY AND CONFORMANCE CONTROL  

SciTech Connect (OSTI)

Many domestic oil fields are facing abandonment even though they still contain two-thirds of their original oil. A significant number of these fields can yield additional oil using advanced oil recovery (AOR) technologies. To maintain domestic oil production at current levels, AOR technologies are needed that are affordable and can be implemented by independent oil producers of the future. Microbial enhanced oil recovery (MEOR) technologies have become established as cost-effective solutions for declining oil production. MEOR technologies are affordable for independent producers operating stripper wells and can be used to extend the life of marginal fields. The demonstrated versatility of microorganisms can be used to design advanced microbial systems to treat multiple production problems in complex, heterogeneous reservoirs. The proposed research presents the concept of a combined microbial surfactant-polymer system for advanced oil recovery. The surfactant-polymer system utilizes bacteria that are capable of both biosurfactant production and metabolically-controlled biopolymer production. This novel technology combines complementary mechanisms to extend the life of marginal fields and is applicable to a large number of domestic reservoirs. The research project described in this report is performed jointly by, Bio-Engineering Inc., a woman owned small business, Texas A&M University and Prairie View A&M University, a Historically Black College and University. This report describes the results of our laboratory work to grow microbial cultures and the work done on recovery experiments on core rocks. We have selected two bacterial strains capable of producing both surfactant and polymers. We have conducted laboratory experiments to determine under what conditions surfactants and polymers can be produced from one single strain. We have conduct recovery experiments to determine the performance of these strains under different conditions. Our results do not show a significant influence of nutrient regime on alternate production of surfactants or polymers.

Jorge Gabitto; Maria Barrufet

2004-08-01T23:59:59.000Z

84

The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems analysis, fluid mechanics) with the life  

E-Print Network [OSTI]

34 The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems analysis, fluid mechanics) with the life sciences (biology, physiology, biochemistry) to define and solve problems in biology and medicine. Students choose this growing branch of engineering

Rohs, Remo

85

Dynamics, Optimization and Control of a Fuel Cell Based Combined Heat Power (CHP) System for Shipboard Applications  

E-Print Network [OSTI]

Dynamics, Optimization and Control of a Fuel Cell Based Combined Heat Power (CHP) System, a natural gas fuel processor system (FPS), a proton exchange membrane fuel cell (PEM-FC) and a catalytic) systems based on fuel cells and fuel processing technologies have great potential for future shipboard

Stefanopoulou, Anna

86

Optimum combined test plans for systems and components JAYANT RAJGOPAL, MAINAK MAZUMDAR and SUBBA RAO V. MAJETY  

E-Print Network [OSTI]

Optimum combined test plans for systems and components JAYANT RAJGOPAL, MAINAK MAZUMDAR and SUBBA on the reliability of a system could be made on the basis of tests of its constituent components. Prior research in the area of system-based component testing has for the most part addressed the development of plans

Mazumdar, Mainak

87

Guide to Combined Heat and Power Systems for Boiler Owners and Operators  

SciTech Connect (OSTI)

Combined heat and power (CHP) or cogeneration is the sequential production of two forms of useful energy from a single fuel source. In most CHP applications, chemical energy in fuel is converted to both mechanical and thermal energy. The mechanical energy is generally used to generate electricity, while the thermal energy or heat is used to produce steam, hot water, or hot air. Depending on the application, CHP is referred to by various names including Building Cooling, Heating, and Power (BCHP); Cooling, Heating, and Power for Buildings (CHPB); Combined Cooling, Heating, and Power (CCHP); Integrated Energy Systems (IES), or Distributed Energy Resources (DER). The principal technical advantage of a CHP system is its ability to extract more useful energy from fuel compared to traditional energy systems such as conventional power plants that only generate electricity and industrial boiler systems that only produce steam or hot water for process applications. By using fuel energy for both power and heat production, CHP systems can be very energy efficient and have the potential to produce electricity below the price charged by the local power provider. Another important incentive for applying cogeneration technology is to reduce or eliminate dependency on the electrical grid. For some industrial processes, the consequences of losing power for even a short period of time are unacceptable. The primary objective of the guide is to present information needed to evaluate the viability of cogeneration for new or existing industrial, commercial, and institutional (ICI) boiler installations and to make informed CHP equipment selection decisions. Information presented is meant to help boiler owners and operators understand the potential benefits derived from implementing a CHP project and recognize opportunities for successful application of cogeneration technology. Topics covered in the guide follow: (1) an overview of cogeneration technology with discussions about benefits of applying cogeneration technology and barriers to implementing cogeneration technology; (2) applicable federal regulations and permitting issues; (3) descriptions of prime movers commonly used in CHP applications, including discussions about design characteristics, heat-recovery options and equipment, fuels and emissions, efficiency, maintenance, availability, and capital cost; (4) electrical generators and electrical interconnection equipment; (5) cooling and dehumidification equipment; (6) thermodynamic cycle options and configurations; (7) steps for evaluating the technical and economic feasibility of applying cogeneration technology; and (8) information sources.

Oland, CB

2004-08-19T23:59:59.000Z

88

Technical Analysis of Installed Micro-Combined Heat and Power Fuel-Cell System  

SciTech Connect (OSTI)

Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a technical analysis of 5 kWe CHP-FCSs installed in different locations in the U.S. At some sites as many as five 5 kWe system is used to provide up to 25kWe of power. Systems in this power range are considered “micro”-CHP-FCS. To better assess performance of micro-CHP-FCS and understand their benefits, the U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe PBI high temperature PEM fuel cells (CE5 models) in the commercial markets of California and Oregon. Pacific Northwest National Laboratory evaluated these systems in terms of their economics, operations, and technical performance. These units were monitored from September 2011 until June 2013. During this time, about 190,000 hours of data were collected and more than 17 billion data points were analyzed. Beginning in July 2013, ten of these systems were gradually replaced with ungraded systems (M5 models) containing phosphoric acid fuel cell technology. The new units were monitored until June 2014 until they went offline because ClearEdge was bought by Doosan at the time and the new manufacturer did not continue to support data collection and maintenance of these units. During these two phases, data was collected at once per second and data analysis techniques were applied to understand behavior of these systems. The results of this analysis indicate that systems installed in the second phase of this demonstration performed much better in terms of availability, consistency in generation, and reliability. The average net electrical power output increased from 4.1 to 4.9 kWe, net heat recovery from 4.7 to 5.4 kWth, and system availability improved from 94% to 95%. The average net system electric efficiency, average net heat recovery efficiency, and overall net efficiency of the system increased respectively from 33% to 36%, from 38% to 41%, and from 71% to 76%. The temperature of water sent to sit however reduced by about 16% from 51?C to 43 ?C. This was a control strategy and the temperature can be controlled depending on building heat demands. More importantly, the number of shutdowns and maintenance events required to keep the systems running at the manufacturer’s rated performance specifications were substantially reduced by about 76% (for 8 to 10 units running over a one-year period). From July 2012 to June 2013, there were eight CE5 units in operation and a total of 134 scheduled and unscheduled shutdowns took place. From July 2013 to June 2014, between two to ten units were in operation and only 32 shutdowns were reported (all unscheduled). In summary, the number of shutdowns reduced from 10 shutdowns per month on average for eight CE5units to an average of 2.7 shutdowns per month for M5 units (between two to ten units).

Brooks, Kriston P.; Makhmalbaf, Atefe

2014-10-31T23:59:59.000Z

89

Life cycle assessment of a biomass gasification combined-cycle power system  

SciTech Connect (OSTI)

The potential environmental benefits from biomass power are numerous. However, biomass power may also have some negative effects on the environment. Although the environmental benefits and drawbacks of biomass power have been debated for some time, the total significance has not been assessed. This study serves to answer some of the questions most often raised in regard to biomass power: What are the net CO{sub 2} emissions? What is the energy balance of the integrated system? Which substances are emitted at the highest rates? What parts of the system are responsible for these emissions? To provide answers to these questions, a life cycle assessment (LCA) of a hypothetical biomass power plant located in the Midwest United States was performed. LCA is an analytical tool for quantifying the emissions, resource consumption, and energy use, collectively known as environmental stressors, that are associated with converting a raw material to a final product. Performed in conjunction with a technoeconomic feasibility study, the total economic and environmental benefits and drawbacks of a process can be quantified. This study complements a technoeconomic analysis of the same process, reported in Craig and Mann (1996) and updated here. The process studied is based on the concept of power Generation in a biomass integrated gasification combined cycle (BIGCC) plant. Broadly speaking, the overall system consists of biomass production, its transportation to the power plant, electricity generation, and any upstream processes required for system operation. The biomass is assumed to be supplied to the plant as wood chips from a biomass plantation, which would produce energy crops in a manner similar to the way food and fiber crops are produced today. Transportation of the biomass and other materials is by both rail and truck. The IGCC plant is sized at 113 MW, and integrates an indirectly-heated gasifier with an industrial gas turbine and steam cycle. 63 refs., 34 figs., 32 tabs.

Mann, M.K.; Spath, P.L.

1997-12-01T23:59:59.000Z

90

Thermionic-combustor combined-cycle system. Volume III. A thermionic converter design for gas-turbine combined-cycle systems  

SciTech Connect (OSTI)

Thermionic converter design is strongly influenced by the configuration of the heat source and heat sink. These two externally imposed conditions are of major importance in arriving at a viable converter design. In addition to these two factors, the economical and reliable transfer of energy internally within the converter is another major item in the design. The effects of the engineering trade-offs made in arriving at the design chosen for the Gas Turbine Combined Cycle combustor are reviewed.

Fitzpatrick, G.O.; Britt, E.J.; Dick, R.S. Jr.

1981-05-01T23:59:59.000Z

91

COMBINED MICROBIAL SURFACTANT-POLYMER SYSTEM FOR IMPROVED OIL MOBILITY AND CONFORMANCE CONTROL  

SciTech Connect (OSTI)

Many domestic oil fields are facing abandonment even though they still contain two-thirds of their original oil. A significant number of these fields can yield additional oil using advanced oil recovery (AOR) technologies. To maintain domestic oil production at current levels, AOR technologies are needed that are affordable and can be implemented by the independent oil producers of the future. Microbial enhanced oil recovery (MEOR) technologies have become established as cost-effective solutions for declining oil production. MEOR technologies are affordable for independent producers operating stripper wells and can be used to extend the life of marginal fields. The demonstrated versatility of microorganisms can be used to design advanced microbial systems to treat multiple production problems in complex, heterogeneous reservoirs. The proposed research presents the concept of a combined microbial surfactant-polymer system for advanced oil recovery. The surfactant-polymer system utilizes bacteria that are capable of both biosurfactant production and metabolically-controlled biopolymer production. This novel technology combines complementary mechanisms to extend the life of marginal fields and is applicable to a large number of domestic reservoirs. The research project described in this report was performed by Bio-Engineering Inc., a woman owned small business, Texas A&M University and Prairie View A&M University, a Historically Black College and University. This report describes the results of our laboratory work to grow microbial cultures, the work done on recovery experiments on core rocks, and computer simulations. We have selected two bacterial strains capable of producing both surfactant and polymers. We have conducted laboratory experiments to determine under what conditions surfactants and polymers can be produced from one single strain. We have conduct recovery experiments to determine the performance of these strains under different conditions. Our results show a significant influence of nutrient regime on alternate production of surfactants or polymers for a Bacillus licheniformis strain, NIPER 1A. The main conclusion of this work is that NIPER 1A can produce both surfactant and polymer by nutrient regime manipulation. Our experiments proved that this property leads to improved oil recovery by increasing alternatively, oil mobility and conformance control.

Jorge Gabitto; Maria Barrufet

2005-08-01T23:59:59.000Z

92

Combined cooling and purification system for nuclear reactor spent fuel pit, refueling cavity, and refueling water storage tank  

DOE Patents [OSTI]

The spent fuel pit of a pressured water reactor (PWR) nuclear power plant has sufficient coolant capacity that a safety rated cooling system is not required. A non-safety rated combined cooling and purification system with redundant branches selectively provides simultaneously cooling and purification for the spent fuel pit, the refueling cavity, and the refueling water storage tank, and transfers coolant from the refueling water storage tank to the refueling cavity without it passing through the reactor core. Skimmers on the suction piping of the combined cooling and purification system eliminate the need for separate skimmer circuits with dedicated pumps.

Corletti, Michael M. (New Kensington, PA); Lau, Louis K. (Monroeville, PA); Schulz, Terry L. (Murrysville Boro, PA)

1993-01-01T23:59:59.000Z

93

Combined cooling and purification system for nuclear reactor spent fuel pit, refueling cavity, and refueling water storage tank  

DOE Patents [OSTI]

The spent fuel pit of a pressured water reactor (PWR) nuclear power plant has sufficient coolant capacity that a safety rated cooling system is not required. A non-safety rated combined cooling and purification system with redundant branches selectively provides simultaneously cooling and purification for the spent fuel pit, the refueling cavity, and the refueling water storage tank, and transfers coolant from the refueling water storage tank to the refueling cavity without it passing through the reactor core. Skimmers on the suction piping of the combined cooling and purification system eliminate the need for separate skimmer circuits with dedicated pumps. 1 figures.

Corletti, M.M.; Lau, L.K.; Schulz, T.L.

1993-12-14T23:59:59.000Z

94

Ute Tribe Energy Conference & Expo  

Office of Energy Efficiency and Renewable Energy (EERE)

An international gathering of energy producing Tribes, governments and companies envisioning a path forward towards a more sustainable future.

95

Ute Tribe Energy Conference & Expo  

Broader source: Energy.gov [DOE]

Save the date for this international gathering of energy-producing Tribes, governments, and companies envisioning a path forward toward a more sustainable future. This two-day conference and expo will provide information on national policy and budget, state oil and gas, tribal energy companies and tribal policies for success.

96

Tevatron University - UTeV  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 and NbSe2 . TensileTevatron University is an attempt

97

Combining Droop Curve Concepts with Control Systems for Wind Turbine Active Power Control: Preprint  

SciTech Connect (OSTI)

Wind energy is becoming a larger portion of the global energy portfolio and wind penetration has increased dramatically in certain regions of the world. This increasing wind penetration has driven the need for wind turbines to provide active power control (APC) services to the local utility grid, as wind turbines do not intrinsically provide frequency regulation services that are common with traditional generators. It is common for large scale wind turbines to be decoupled from the utility grid via power electronics, which allows the turbine to synthesize APC commands via control of the generator torque and blade pitch commands. Consequently, the APC services provided by a wind turbine can be more flexible than those provided by conventional generators. This paper focuses on the development and implementation of both static and dynamic droop curves to measure grid frequency and output delta power reference signals to a novel power set point tracking control system. The combined droop curve and power tracking controller is simulated and comparisons are made between simulations using various droop curve parameters and stochastic wind conditions. The tradeoffs involved with aggressive response to frequency events are analyzed. At the turbine level, simulations are performed to analyze induced structural loads. At the grid level, simulations test a wind plant's response to a dip in grid frequency.

Buckspan, A.; Aho, J.; Pao, L.; Fleming, P.; Jeong, Y.

2012-06-01T23:59:59.000Z

98

Business Case for a Micro-Combined Heat and Power Fuel Cell System in Commercial Applications  

SciTech Connect (OSTI)

Combined heat and power fuel cell systems (CHP-FCSs) provide consistent electrical power and hot water with greater efficiency and lower emissions than alternative sources. These systems can be used either as baseload, grid-connected, or as off-the-grid power sources. This report presents a business case for CHP-FCSs in the range of 5 to 50 kWe. Systems in this power range are considered micro-CHP-FCS. For this particular business case, commercial applications rather than residential or industrial are targeted. To understand the benefits of implementing a micro-CHP-FCS, the characteristics that determine their competitive advantage must first be identified. Locations with high electricity prices and low natural gas prices are ideal locations for micro-CHP-FCSs. Fortunately, these high spark spread locations are generally in the northeastern area of the United States and California where government incentives are already in place to offset the current high cost of the micro-CHP-FCSs. As a result of the inherently high efficiency of a fuel cell and their ability to use the waste heat that is generated as a CHP, they have higher efficiency. This results in lower fuel costs than comparable alternative small-scale power systems (e.g., microturbines and reciprocating engines). A variety of markets should consider micro-CHP-FCSs including those that require both heat and baseload electricity throughout the year. In addition, the reliable power of micro-CHP-FCSs could be beneficial to markets where electrical outages are especially frequent or costly. Greenhouse gas emission levels from micro-CHP-FCSs are 69 percent lower, and the human health costs are 99.9 percent lower, than those attributed to conventional coal-fired power plants. As a result, FCSs can allow a company to advertise as environmentally conscious and provide a bottom-line sales advantage. As a new technology in the early stages of adoption, micro-CHP-FCSs are currently more expensive than alternative technologies. As the technology gains a foothold in its target markets and demand increases, the costs will decline in response to improved manufacturing efficiencies, similar to trends seen with other technologies. Transparency Market Research forecasts suggest that the CHP-FCS market will grow at a compound annual growth rate of greater than 27 percent over the next 5 years. These production level increases, coupled with the expected low price of natural gas, indicate the economic payback period will move to less than 5 years over the course of the next 5 years. To better understand the benefits of micro-CHP-FCSs, The U.S. Department of Energy worked with ClearEdge Power to install fifteen 5-kWe fuel cells in the commercial markets of California and Oregon. Pacific Northwest National Laboratory is evaluating these systems in terms of economics, operations, and their environmental impact in real-world applications. As expected, the economic analysis has indicated that the high capital cost of the micro-CHP-FCSs results in a longer payback period than typically is acceptable for all but early-adopter market segments. However, a payback period of less than 3 years may be expected as increased production brings system cost down, and CHP incentives are maintained or improved.

Brooks, Kriston P.; Makhmalbaf, Atefe; Anderson, David M.; Amaya, Jodi P.; Pilli, Siva Prasad; Srivastava, Viraj; Upton, Jaki F.

2013-10-30T23:59:59.000Z

99

Use of Time-Aggregated Data in Economic Screening Analyses of Combined Heat and Power Systems  

SciTech Connect (OSTI)

Combined heat and power (CHP) projects (also known as cogeneration projects) usually undergo a series of assessments and viability checks before any commitment is made. A screening analysis, with electrical and thermal loads characterized on an annual basis, may be performed initially to quickly determine the economic viability of the proposed project. Screening analyses using time-aggregated data do not reflect several critical cost influences, however. Seasonal and diurnal variations in electrical and thermal loads, as well as time-of-use utility pricing structures, can have a dramatic impact on the economics. A more accurate economic assessment requires additional detailed data on electrical and thermal demand (e.g., hourly load data), which may not be readily available for the specific facility under study. Recent developments in CHP evaluation tools, however, can generate the needed hourly data through the use of historical data libraries and building simulation. This article utilizes model-generated hourly load data for four potential CHP applications and compares the calculated cost savings of a CHP system when evaluated on a time-aggregated (i.e., annual) basis to the savings when evaluated on an hour-by-hour basis. It is observed that the simple, aggregated analysis forecasts much greater savings (i.e., greater economic viability) than the more detailed hourly analysis. The findings confirm that the simpler tool produces results with a much more optimistic outlook, which, if taken by itself, might lead to erroneous project decisions. The more rigorous approach, being more reflective of actual requirements and conditions, presents a more accurate economic comparison of the alternatives, which, in turn, leads to better decision risk management.

Hudson II, Carl Randy [ORNL

2004-09-01T23:59:59.000Z

100

Combined Municipal Solid Waste and biomass system optimization for district energy applications  

SciTech Connect (OSTI)

Highlights: • Combined energy conversion of MSW and agricultural residue biomass is examined. • The model optimizes the financial yield of the investment. • Several system specifications are optimally defined by the optimization model. • The application to a case study in Greece shows positive financial yield. • The investment is mostly sensitive on the interest rate, the investment cost and the heating oil price. - Abstract: Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained.

Rentizelas, Athanasios A., E-mail: arent@central.ntua.gr; Tolis, Athanasios I., E-mail: atol@central.ntua.gr; Tatsiopoulos, Ilias P., E-mail: itat@central.ntua.gr

2014-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Numerical Analysis of JNES Seismic Tests on Degraded Combined Piping System  

SciTech Connect (OSTI)

Nuclear power plant safety under seismic conditions is an important consideration. The piping systems may have some defects caused by fatigue, stress corrosion cracking, etc., in aged plants. These cracks may not only affect the seismic response but also grow and break through causing loss of coolant. Therefore, an evaluation method needs to be developed to predict crack growth behavior under seismic excitation. This paper describes efforts conducted to analyze and better understand a series of degraded pipe tests under seismic loading that was conducted by Japan Nuclear Energy Safety Organization (JNES). A special 'cracked-pipe element' (CPE) concept, where the element represented the global moment-rotation response due to the crack, was developed. This approach was developed to significantly simplify the dynamic finite element analysis in fracture mechanics fields. In this paper, model validation was conducted by comparisons with a series of pipe tests with circumferential through-wall and surface cracks under different excitation conditions. These analyses showed that reasonably accurate predictions could be made using the abaqus connector element to model the complete transition of a circumferential surface crack to a through-wall crack under cyclic dynamic loading. The JNES primary loop recirculation piping test was analyzed in detail. This combined-component test had three crack locations and multiple applied simulated seismic block loadings. Comparisons were also made between the ABAQUS finite element (FE) analyses results to the measured displacements in the experiment. Good agreement was obtained, and it was confirmed that the simplified modeling is applicable to a seismic analysis for a cracked pipe on the basis of fracture mechanics. Pipe system leakage did occur in the JNES tests. The analytical predictions using the CPE approach did not predict leakage, suggesting that cyclic ductile tearing with large-scale plasticity was not the crack growth mode for the acceleration excitations considered here. Hence, the leakage was caused by low-cycle fatigue with small-scale yielding. The procedure used to make predictions of low-cycle fatigue crack growth with small-scale yielding was based on the Dowling {Delta}J procedure, which is an extension of linear-elastic fatigue crack growth methodology into the nonlinear plasticity region. The predicted moments from the CPE approach were used using a cycle-by-cycle crack growth procedure. The predictions compare quite well with the experimental measurements.

Zhang T.; Nie J.; Brust, F.; Wilkowski, G.; Hofmayer, C.; Ali, S.; Shim, D-J.

2012-02-02T23:59:59.000Z

102

1?10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review  

SciTech Connect (OSTI)

This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

Maru, H. C.; Singhal, S. C.; Stone, C.; Wheeler, D.

2010-11-01T23:59:59.000Z

103

1–10 kW Stationary Combined Heat and Power Systems Status and Technical Potential: Independent Review  

Broader source: Energy.gov [DOE]

This independent review examines the status and technical potential of 1-10 kW stationary combined heat and power fuel cell systems and analyzes the achievability of the DOE cost, efficiency, and durability targets for 2012, 2015, and 2020.

104

A System for Transforming the Emotion in Speech: Combining Data-Driven Conversion Techniques for Prosody and Voice Quality  

E-Print Network [OSTI]

variations in an utterance by using a set of perceptually optimized contextual factors. Conversion of phoneA System for Transforming the Emotion in Speech: Combining Data-Driven Conversion Techniques, while dura- tions are transformed using phone-based relative decision trees. For spectral conversion

Young, Steve

105

Evaluation of a Combined Cyclone and Gas Filtration System for Particulate Removal in the Gasification Process  

SciTech Connect (OSTI)

The Wabash gasification facility, owned and operated by sgSolutions LLC, is one of the largest single train solid fuel gasification facilities in the world capable of transforming 2,000 tons per day of petroleum coke or 2,600 tons per day of bituminous coal into synthetic gas for electrical power generation. The Wabash plant utilizes Phillips66 proprietary E-Gas (TM) Gasification Process to convert solid fuels such as petroleum coke or coal into synthetic gas that is fed to a combined cycle combustion turbine power generation facility. During plant startup in 1995, reliability issues were realized in the gas filtration portion of the gasification process. To address these issues, a slipstream test unit was constructed at the Wabash facility to test various filter designs, materials and process conditions for potential reliability improvement. The char filtration slipstream unit provided a way of testing new materials, maintenance procedures, and process changes without the risk of stopping commercial production in the facility. It also greatly reduced maintenance expenditures associated with full scale testing in the commercial plant. This char filtration slipstream unit was installed with assistance from the United States Department of Energy (built under DOE Contract No. DE-FC26-97FT34158) and began initial testing in November of 1997. It has proven to be extremely beneficial in the advancement of the E-Gas (TM) char removal technology by accurately predicting filter behavior and potential failure mechanisms that would occur in the commercial process. After completing four (4) years of testing various filter types and configurations on numerous gasification feed stocks, a decision was made to investigate the economic and reliability effects of using a particulate removal gas cyclone upstream of the current gas filtration unit. A paper study had indicated that there was a real potential to lower both installed capital and operating costs by implementing a char cyclonefiltration hybrid unit in the E-Gas (TM) gasification process. These reductions would help to keep the E-Gas (TM) technology competitive among other coal-fired power generation technologies. The Wabash combined cyclone and gas filtration slipstream test program was developed to provide design information, equipment specification and process control parameters of a hybrid cyclone and candle filter particulate removal system in the E-Gas (TM) gasification process that would provide the optimum performance and reliability for future commercial use. The test program objectives were as follows: 1. Evaluate the use of various cyclone materials of construction; 2. Establish the optimal cyclone efficiency that provides stable long term gas filter operation; 3. Determine the particle size distribution of the char separated by both the cyclone and candle filters. This will provide insight into cyclone efficiency and potential future plant design; 4. Determine the optimum filter media size requirements for the cyclone-filtration hybrid unit; 5. Determine the appropriate char transfer rates for both the cyclone and filtration portions of the hybrid unit; 6. Develop operating procedures for the cyclone-filtration hybrid unit; and, 7. Compare the installed capital cost of a scaled-up commercial cyclone-filtration hybrid unit to the current gas filtration design without a cyclone unit, such as currently exists at the Wabash facility.

Rizzo, Jeffrey J. [Phillips66 Company, West Terre Haute, IN (United States)

2010-04-30T23:59:59.000Z

106

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

solar CHP system supplying arbitrary heat and power outputs.e Electrical power output of system Q Solar CHP to PV yearlysolar Rankine CHP system, sized equally in terms of peak power output,

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

107

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM "PREMIUM POWER" APPLICATIONS IN CALIFORNIA  

E-Print Network [OSTI]

Cooling Heat and Power (CCHP) systems are being installed atand heating loads. These CCHP systems can also act as backupgenerators. In all cases the CCHP systems are rated at a

Norwood, Zack

2010-01-01T23:59:59.000Z

108

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

DCS-CHP system . . . . . . . . . . . . . . . . . . . 7521 Stationary collector CHP to stationary PV performancesolar dish collector DCS-CHP system . . . . . . 28 Water and

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

109

The Added Economic and Environmental Value of Solar Thermal Systems in Microgrids with CombinedHeat and Power  

SciTech Connect (OSTI)

The addition of solar thermal and heat storage systems can improve the economic, as well as environmental attraction of micro-generation systems, e.g. fuel cells with or without combined heat and power (CHP) and contribute to enhanced CO2 reduction. However, the interactions between solar thermal collection and storage systems and CHP systems can be complex, depending on the tariff structure, load profile, etc. In order to examine the impact of solar thermal and heat storage on CO2 emissions and annual energy costs, a microgrid's distributed energy resources (DER) adoption problem is formulated as a mixed-integer linear program. The objective is minimization of annual energy costs. This paper focuses on analysis of the optimal interaction of solar thermal systems, which can be used for domestic hot water, space heating and/or cooling, and micro-CHP systems in the California service territory of San Diego Gas and Electric (SDG&E). Contrary to typical expectations, our results indicate that despite the high solar radiation in southern California, fossil based CHP units are dominant, even with forecast 2020 technology and costs. A CO2 pricing scheme would be needed to incent installation of combined solar thermal absorption chiller systems, and no heat storage systems are adopted. This research also shows that photovoltaic (PV) arrays are favored by CO2 pricing more than solar thermal adoption.

Marnay, Chris; Stadler, Michael; Cardoso, Goncalo; Megel, Olivier; Lai, Judy; Siddiqui, Afzal

2009-08-15T23:59:59.000Z

110

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

the membrane systems, reverse osmosis (RO) garners the mostof vapor compression, reverse osmosis, and electrodialysis

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

111

The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems  

E-Print Network [OSTI]

32 The interdisciplinary field of Biomedical Engineering combines elements of engineering access to the University's Pre-Health advisement office. Biomedical Engineering students can participate A L E N G I N E E R I N G ( B M E ) BME 101 Introduction to Biomedical Engineering (3, Fa) Historical

Rohs, Remo

112

The interdisciplinary field of Biomedical Engineering combines elements of engineering (electronics, systems  

E-Print Network [OSTI]

32 The interdisciplinary field of Biomedical Engineering combines elements of engineering to the complex problems of medical care. The Biomedical Engineering program provides a special competence-med BME students have access to the University's Pre-Health advisement office. Biomedical Engineering

Rohs, Remo

113

Modeling the Performance, Emissions, and Cost of an Entrained-Flow Gasification Combined Cycle System Using  

E-Print Network [OSTI]

1 Modeling the Performance, Emissions, and Cost of an Entrained-Flow Gasification Combined Cycle Carolina State University ABSTRACT Gasification is a globally emerging technology in commercial markets for the conversion of a variety of feedstocks, including coal, heavy residue oil, biomass, solid waste, and others

Frey, H. Christopher

114

Novel Power Cycle for Combined-Cycle Systems and Utility Power Plants  

E-Print Network [OSTI]

wi th the Wes t inghouse SOlD gas turb ',ne, but also compared to combined-cycle sys terns wi th the advanced gas turbi ie 700lF of General Electric, despite qhe fact that the efficiency of the 7001.F gas turbine per se is higher than...

Kalina, A. L.

115

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

the subject of residential solar CHP, volumetric expansionthesis devoted to residential solar CHP systems) that inCHP system, in the 1-10 kW peak electric range, will be appropriate for small residential

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

116

Combined Operation of Solar Energy Source Heat Pump, Low-vale Electricity and Floor Radiant System  

E-Print Network [OSTI]

solar energy, low-vale electricity as heat sources in a floor radiant system are analyzed. This paper presents a new heat pump system and discusses its operational modes in winter....

Liu, G.; Guo, Z.; Hu, S.

2006-01-01T23:59:59.000Z

117

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM "PREMIUM POWER" APPLICATIONS IN CALIFORNIA  

E-Print Network [OSTI]

range of a fuel cell is limited, this cost would depend muchThe actual cost of doing this for a fuel cell system couldaverage cost of adding this capability to a fuel cell system

Norwood, Zack

2010-01-01T23:59:59.000Z

118

System study of an MHD/gas turbine combined-cycle baseload power plant. HTGL report No. 134  

SciTech Connect (OSTI)

The MHD/gas turbine combined-cycle system has been designed specifically for applications where the availability of cooling water is very limited. The base case systems which were studied consisted of an MHD plant with a gas turbine bottoming plant, and required no cooling water. The gas turbine plant uses only air as its working fluid and receives its energy input from the MHD exhaust gases by means of metal tube heat exchangers. In addition to the base case systems, vapor cycle variation systems were considered which included the addition of a vapor cycle bottoming plant to improve the thermal efficiency. These systems required a small amount of cooling water. The MHD/gas turbine systems were modeled with sufficient detail, using realistic component specifications and costs, so that the thermal and economic performance of the system could be accurately determined. Three cases of MHD/gas turbine systems were studied, with Case I being similar to an MHD/steam system so that a direct comparison of the performances could be made, with Case II being representative of a second generation MHD system, and with Case III considering oxygen enrichment for early commercial applications. The systems are nominally 800 MW/sub e/ to 1000 MW/sub e/ in size. The results show that the MHD/gas turbine system has very good thermal and economic performances while requiring either little or no cooling water. Compared to the MHD/steam system which has a cooling tower heat load of 720 MW, the Base Case I MHD/gas turbine system has a heat rate which is 13% higher and a cost of electricity which is only 7% higher while requiring no cooling water. Case II results show that an improved performance can be expected from second generation MHD/gas turbine systems. Case III results show that an oxygen enriched MHD/gas turbine system may be attractive for early commercial applications in dry regions of the country.

Annen, K.D.

1981-08-01T23:59:59.000Z

119

Novel Combination of Enzyme Systems Could Lower Biofuel Costs (Fact Sheet)  

SciTech Connect (OSTI)

Two biomass-degrading enzyme systems that work in very different ways are shown to be more effective at releasing plant sugars when used together.

Not Available

2013-08-01T23:59:59.000Z

120

Novel Combination of Enzyme Systems Could Lower Biofuel Costs (Fact Sheet)  

SciTech Connect (OSTI)

Two biomass-degrading enzyme systems that work in very different ways are shown to be more effective at releasing plant sugars when used together.

Not Available

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Room air stratification in combined chilled ceiling and displacement ventilation systems.  

E-Print Network [OSTI]

Environments. Proceedings of Indoor Air 2005: 10 thInternational Conference on Indoor Air Quality and Climate,displacement ventilation hybrid air conditioning system-

Schiavon, Stefano; Bauman, Fred; Tully, Brad; Rimmer, Julian

2012-01-01T23:59:59.000Z

122

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

impacts the levelized cost of energy generated. ThePV systems. The levelized cost of energy generated by theemissions. The levelized cost of energy generated by the

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

123

DiCES, an expert system for digital combinational circuit design  

E-Print Network [OSTI]

AND PRINCIPLES OF EXPERT SYSTEMS 5 A. Definition Of Expert Systems B. Properties Of Expert Systems C. Knowledge Representation D. Control Mechanisms And Strategies E. Determination Of The Degree Of Belief F. Rules Of Inference 10 12 16 III OVERVIEW... specific application in a particular field. For this reason, DiCES was not built with the help of these tools, but was implemented as a collection of functions in Franz Lisp. B. PROPERTIES OF EXPERT SYSTEMS Besides the separation of the knowledge base...

Sibai, Fadi Nuhad

1986-01-01T23:59:59.000Z

124

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

systems (typically Stirling engines or CPV modules) forheat engines including Brayton, Ericsson, and Stirling, thefocal-mounted engine (e.g. dish-Stirling) by decoupling the

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

125

NiSource Energy Technologies: Optimizing Combined Heat and Power Systems  

SciTech Connect (OSTI)

Summarizes NiSource Energy Technologies' work under contract to DOE's Distribution and Interconnection R&D. Includes studying distributed generation interconnection issues and CHP system performance.

Not Available

2003-01-01T23:59:59.000Z

126

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

because of the high cost of photovoltaic electricity. •cost compares favorably to residential (P e photovoltaic systems in the U.S. that cost ~$

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

127

Combining frequency and time domain approaches to systems with multiple spike train input and output  

E-Print Network [OSTI]

between neuronal spike trains. Prog Biophys Mol Biol Vapnikto systems with multiple spike train input and output D. R.Keywords Multiple spike trains · Neural coding · Maximum

Brillinger, D. R.; Lindsay, K. A.; Rosenberg, J. R.

2009-01-01T23:59:59.000Z

128

Learning to Manage Combined Energy Supply Systems Azalia Mirhoseini, Farinaz Koushanfar  

E-Print Network [OSTI]

and a set of supercapacitors to extend the system's lifetime. Batteries are not sufficient for handling high load fluctuations and demands in modern complex systems. Supercapacitors hold promise for complementing, and less sensitivity to operational conditions. However, supercapacitors are not efficient as a stand

129

Combining Systems and Databases: A Search Engine Retrospective Eric A. Brewer  

E-Print Network [OSTI]

and complexity of these systems, they make almost no use of DBMS systems. There are many reasons for this, which exists in sets without pointers. This allows evolution of representation and storage, and simplifies query optimizations. We do not however use SQL (a DBMS artifact), but we do use the structure of a DBMS

Brewer, Eric A.

130

PRODIAG: Combined expert system/neural network for process fault diagnosis. Volume 1, Theory  

SciTech Connect (OSTI)

The function of the PRODIAG code is to diagnose on-line the root cause of a thermal-hydraulic (T-H) system transient with trace back to the identification of the malfunctioning component using the T-H instrumentation signals exclusively. The code methodology is based on the Al techniques of automated reasoning/expert systems (ES) and artificial neural networks (ANN). The research and development objective is to develop a generic code methodology which would be plant- and T-H-system-independent. For the ES part the only plant or T-H system specific code requirements would be implemented through input only and at that only through a Piping and Instrumentation Diagram (PID) database. For the ANN part the only plant or T-H system specific code requirements would be through the ANN training data for normal component characteristics and the same PID database information. PRODIAG would, therefore, be generic and portable from T-H system to T-H system and from plant to plant without requiring any code-related modifications except for the PID database and the ANN training with the normal component characteristics. This would give PRODIAG the generic feature which numerical simulation plant codes such as TRAC or RELAP5 have. As the code is applied to different plants and different T-H systems, only the connectivity information, the operating conditions and the normal component characteristics are changed, and the changes are made entirely through input. Verification and validation of PRODIAG would, be T-H system independent and would be performed only ``once``.

Reifman, J.; Wei, T.Y.C.; Vitela, J.E.

1995-09-01T23:59:59.000Z

131

Subcontract Report: Modular Combined Heat & Power System for Utica College: Design Specification  

SciTech Connect (OSTI)

Utica College, located in Utica New York, intends to install an on-site power/cogeneration facility. The energy facility is to be factory pre-assembled, or pre- assembled in modules, to the fullest extent possible, and ready to install and interconnect at the College with minimal time and engineering needs. External connections will be limited to fuel supply, electrical output, potable makeup water as required and cooling and heat recovery systems. The proposed facility will consist of 4 self-contained, modular Cummins 330kW engine generators with heat recovery systems and the only external connections will be fuel supply, electrical outputs and cooling and heat recovery systems. This project was eventually cancelled due to changing DOE budget priorities, but the project engineers produced this system design specification in hopes that it may be useful in future endeavors.

Rouse, Greg [Gas Technology Institute

2007-09-01T23:59:59.000Z

132

Energy Efficiency Evaluation of Refrigeration Technologies in Combined Cooling, Heating and Power Systems  

E-Print Network [OSTI]

With development of absorption refrigeration technology, the cooling requirement can be met using various optional refrigeration technologies in a CCHP system, including compression refrigeration, steam double-effect absorption refrigeration, steam...

Zuo, Z.; Hu, W.

2006-01-01T23:59:59.000Z

133

110 kW Stationary Combined Heat and Power Systems Status and  

E-Print Network [OSTI]

the status of 1­10 kW CHP stationary fuel cell systems and to comment on the achievability of cost Published for the U.S. Department of Energy Hydrogen and Fuel Cells Program NREL/BK-6A10-48265 November 2010 technologies that are being developed to address the market needs of 1­10 kW CHP stationary systems: low

134

3-Port Single-Stage PV & Battery Converter Improves Efficiency and Cost in Combined PV/Battery Systems  

SciTech Connect (OSTI)

Due to impressive cost reductions in recent years, photovoltaic (PV) generation is now able to produce electricity at highly competitive prices, but PV’s inherent intermittency reduces the potential value of this energy. The integration of battery storage with PV will be transformational by increasing the value of solar. Utility scale systems will benefit by firming intermittency including PV ramp smoothing, grid support and load shifting, allowing PV to compete directly with conventional generation. For distributed grid-tied PV adding storage will reduce peak demand utility charges, as well as providing backup power during power grid failures. The largest long term impact of combined PV and battery systems may be for delivering reliable off-grid power to the billions of individuals globally without access to conventional power grids, or for billions more that suffer from daily power outages. PV module costs no longer dominate installed PV system costs. Balance-of-System (BOS) costs including the PV inverter and installation now contribute the majority of installed system costs. Battery costs are also dropping faster than installation and battery power converter systems. In each of these separate systems power converters have become a bottleneck for efficiency, cost and reliability. These bottlenecks are compounded in hybrid power conversion systems that combine separate PV and battery converters. Hybrid power conversion systems have required multiple power converters hardware units and multiple power conversion steps adding to efficiency losses, product and installation costs, and reliability issues. Ideal Power Converters has developed and patented a completely new theory of operation for electronic power converters using its indirect EnergyPacket Switching™ topology. It has established successful power converter products for both PV and battery systems, and its 3-Port Hybrid Converter is the first product to exploit the topology’s capability for the industry’s first single-stage multi-port hybrid power converter. This unique low cost approach eliminates the hybrid power conversion bottlenecks when integrating batteries into PV systems. As result this product will significantly accelerate market adoption of these systems.

Bundschuh, Paul [Ideal Power

2013-03-23T23:59:59.000Z

135

Two well storage systems for combined heating and airconditioning by groundwater heatpumps in shallow aquifers  

SciTech Connect (OSTI)

The use of soil and ground water as an energy source and heat storage systems for heat pumps in order to conserve energy in heating and air conditioning buildings is discussed. Information is included on heat pump operation and performance, aquifer characteristics, soil and ground water temperatures, and cooling and heating demands. Mathematical models are used to calculate flow and temperature fields in the aquifer. It is concluded that two well storage systems with ground water heat pumps are desirable, particularly in northern climates. (LCL)

Pelka, W.

1980-07-01T23:59:59.000Z

136

CFD Simulation and Analysis of the Combined Evaporative Cooling and Radiant Ceiling Air-conditioning System  

E-Print Network [OSTI]

, and the ceiling cooling system deals with the other part of sensible loads in the air-conditioned zone, so that the condensation on radiant panels and the insufficiency of cooling capacity can be avoided. The cooling water at 18? used in the cooling coils...

Xiang, H.; Yinming, L.; Junmei, W.

2006-01-01T23:59:59.000Z

137

Combined refrigeration system with a liquid pre-cooling heat exchanger  

DOE Patents [OSTI]

A compressor-pump unit for use in a vapor-compression refrigeration system is provided. The compressor-pump unit comprises a driving device including a rotatable shaft. A compressor is coupled with a first portion of the shaft for compressing gaseous refrigerant within the vapor-compression refrigeration system. A liquid pump is coupled with a second portion of the shaft for receiving liquid refrigerant having a first pressure and for discharging the received liquid refrigerant at a second pressure with the second pressure being higher than the first pressure by a predetermined amount such that the discharged liquid refrigerant is subcooled. A pre-cooling circuit is connected to the liquid pump with the pre-cooling circuit being exposed to the gaseous refrigerant whereby the gaseous refrigerant absorbs heat from the liquid refrigerant, prior to the liquid refrigerant entering the liquid pump.

Gaul, Christopher J.

2003-07-01T23:59:59.000Z

138

Combined expert system/neural networks method for process fault diagnosis  

DOE Patents [OSTI]

A two-level hierarchical approach for process fault diagnosis of an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach. 9 figs.

Reifman, J.; Wei, T.Y.C.

1995-08-15T23:59:59.000Z

139

Combined expert system/neural networks method for process fault diagnosis  

DOE Patents [OSTI]

A two-level hierarchical approach for process fault diagnosis is an operating system employs a function-oriented approach at a first level and a component characteristic-oriented approach at a second level, where the decision-making procedure is structured in order of decreasing intelligence with increasing precision. At the first level, the diagnostic method is general and has knowledge of the overall process including a wide variety of plant transients and the functional behavior of the process components. An expert system classifies malfunctions by function to narrow the diagnostic focus to a particular set of possible faulty components that could be responsible for the detected functional misbehavior of the operating system. At the second level, the diagnostic method limits its scope to component malfunctions, using more detailed knowledge of component characteristics. Trained artificial neural networks are used to further narrow the diagnosis and to uniquely identify the faulty component by classifying the abnormal condition data as a failure of one of the hypothesized components through component characteristics. Once an anomaly is detected, the hierarchical structure is used to successively narrow the diagnostic focus from a function misbehavior, i.e., a function oriented approach, until the fault can be determined, i.e., a component characteristic-oriented approach.

Reifman, Jaques (Westchester, IL); Wei, Thomas Y. C. (Downers Grove, IL)

1995-01-01T23:59:59.000Z

140

The Added Economic and Environmental Value of Solar Thermal Systems in Microgrids with Combined Heat and Power  

E-Print Network [OSTI]

with or without combined heat and power (CHP) and contributein Microgrids with Combined Heat and Power Chris Marnay,Microgrids with Combined Heat and Power 1 Chris Marnay a) ,

Marnay, Chris

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

HYBRID ALARM SYSTEMS: COMBINING SPATIAL ALARMS AND ALARM LISTS FOR OPTIMIZED CONTROL ROOM OPERATION  

SciTech Connect (OSTI)

The US Department of Energy (DOE) is sponsoring research, development, and deployment on Light Water Reactor Sustainability (LWRS), in which the Idaho National Laboratory (INL) is working closely with nuclear utilities to develop technologies and solutions to help ensure the safe operational life extension of current nuclear power plants. One of the main areas of focus is control room modernization. Within control room modernization, alarm system upgrades present opportunities to meet the broader goals of the LWRS project in demonstrating the use and safety of the advanced instrumentation and control (I&C) technologies and the short-term and longer term objectives of the plant. In this paper, we review approaches for and human factors issues behind upgrading alarms in the main control room of nuclear power plants.

Ronald L. Boring; J.J. Persensky

2012-07-01T23:59:59.000Z

142

Explorations in combining cognitive models of individuals and system dynamics models of groups.  

SciTech Connect (OSTI)

This report documents a demonstration model of interacting insurgent leadership, military leadership, government leadership, and societal dynamics under a variety of interventions. The primary focus of the work is the portrayal of a token societal model that responds to leadership activities. The model also includes a linkage between leadership and society that implicitly represents the leadership subordinates as they directly interact with the population. The societal model is meant to demonstrate the efficacy and viability of using System Dynamics (SD) methods to simulate populations and that these can then connect to cognitive models depicting individuals. SD models typically focus on average behavior and thus have limited applicability to describe small groups or individuals. On the other hand, cognitive models readily describe individual behavior but can become cumbersome when used to describe populations. Realistic security situations are invariably a mix of individual and population dynamics. Therefore, the ability to tie SD models to cognitive models provides a critical capability that would be otherwise be unavailable.

Backus, George A.

2008-07-01T23:59:59.000Z

143

Portable system and method combining chromatography and array of electrochemical sensors  

DOE Patents [OSTI]

A portable system for analyzing a fluid sample includes a small, portable, low-pressure and low-power chromatographic analyzer and a chemical parameter spectrometry monitor including an array of sensors for detecting, identifying and measuring the concentrations of a variety of components in the eluent from the chromatographic analyzer. The monitor includes one or more operating condition controllers which may be used to change one or more of the operating conditions during exposure of the sensors to the eluent from the chromatography analyzer to form a response pattern which is then compared with a library of previously established patterns. Gas and liquid chromatographic embodiments are disclosed. In the gas embodiment, the operating condition controllers include heated filaments which may convert electrochemically inactive components to electrochemically active products. In the liquid chromatography embodiment, low-power, liquid-phase equivalents of heated filaments are used with appropriate sensors. The library response patterns may be divided into subsets and the formed pattern may be assigned for comparison only with the patterns of a particular subset.

Zaromb, Solomon (Hinsdale, IL); Stetter, Joseph R. (Naperville, IL)

1989-01-01T23:59:59.000Z

144

Evaluation of the Efficacy of Combined Continuous Arterial Infusion and Systemic Chemotherapy for the Treatment of Advanced Pancreatic Carcinoma  

SciTech Connect (OSTI)

Purpose. To evaluate the effects of combined continuous transcatheter arterial infusion (CTAI) and systemic chemotherapy in patients with advanced pancreatic carcinoma. Methods. CTAI was performed in 17 patients with stage IV pancreatic cancer with (n = 11) or without (n = 6) liver metastasis. The reservoir was transcutaneously implanted with the help of angiography. The inferior pancreatic artery (IPA) was embolized to achieve delivery of the pancreatic blood supply through only the celiac artery. The systemic administration of gemcitabine was combined with the infusion of 5-fluorouracil via the reservoir. Treatment effects were evaluated based on the primary tumor size, liver metastasis, and survival time and factors such as tumor size, tumor location, and stage of pancreatic carcinoma; the embolized arteries were analyzed with respect to treatment effects and prognosis. Results. A catheter was fixed in the gastroduodenal artery and splenic artery in 10 and 7 patients, respectively. Complete peripancreatic arterial occlusion was successful in 10 patients. CT showed a decrease in tumor size in 6 of 17 (35%) patients and a decrease in liver metastases in 6 of 11 (55%) patients. The survival time ranged from 4 to 18 months (mean {+-} SD, 8.8 {+-} 1.5 months). Complete embolization of arteries surrounding the pancreas was achieved in 10 patients; they manifested superior treatment effects and prognoses (p < 0.05). Conclusion. In patients with advanced pancreatic cancer, long-term CTAI with systemic chemotherapy appeared to be effective not only against the primary tumor but also against liver metastases. Patients with successfully occluded peripancreatic arteries tended to survive longer.

Ikeda, O., E-mail: osamu-3643ik@do9.enjoy.ne.jp; Kusunoki, S.; Kudoh, K. [Kumamoto University Graduate School of Medical and Pharmaceutical Sciences, Department of Diagnostic Radiology (Japan); Takamori, H.; Tsuji, T.; Kanemitsu, K. [Kumamoto University Graduate School of Medical and Pharmaceutical Sciences, Department of Gastroenterological Surgery (Japan); Yamashita, Y. [Kumamoto University Graduate School of Medical and Pharmaceutical Sciences, Department of Diagnostic Radiology (Japan)

2006-06-15T23:59:59.000Z

145

Feasibility study on a combined summer cooling and winter heating system, based on a combination of solar energy and ground heat pumps  

SciTech Connect (OSTI)

The system is planned for a semi-detached (row) one family house with an area of 103 m/sup 2/ on two floors. Three European locations chosen for the study are Copenhagen, Paris, and Marseille. The computer model is described and some results presented. (MHR)

Fordsmand, M.; Eggers-Lura, A.

1980-01-01T23:59:59.000Z

146

Method and system for the combination of non-thermal plasma and metal/metal oxide doped .gamma.-alumina catalysts for diesel engine exhaust aftertreatment system  

DOE Patents [OSTI]

The present disclosure pertains to a system and method for treatment of oxygen rich exhaust and more specifically to a method and system that combines non-thermal plasma with a metal doped .gamma.-alumina catalyst. Current catalyst systems for the treatment of oxygen rich exhaust are capable of achieving only approximately 7 to 12% NO.sub.x reduction as a passive system and only 25 40% reduction when a supplemental hydrocarbon reductant is injected into the exhaust stream. It has been found that treatment of an oxygen rich exhaust initially with a non-thermal plasma and followed by subsequent treatment with a metal doped .gamma.-alumina prepared by the sol gel method is capable of increasing the NO.sub.x reduction to a level of approximately 90% in the absence of SO.sub.2 and 80% in the presence of 20 ppm of SO.sub.2. Especially useful metals have been found to be indium, gallium, and tin.

Aardahl, Christopher L. (Richland, WA); Balmer-Miller, Mari Lou (West Richland, WA); Chanda, Ashok (Peoria, IL); Habeger, Craig F. (West Richland, WA); Koshkarian, Kent A. (Peoria, IL); Park, Paul W. (Peoria, IL)

2006-07-25T23:59:59.000Z

147

Assessment of the Current Level of Automation in the Manufacture of Fuel Cell Systems for Combined Heat and Power Applications  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) is interested in supporting manufacturing research and development (R&D) for fuel cell systems in the 10-1,000 kilowatt (kW) power range relevant to stationary and distributed combined heat and power applications, with the intent to reduce manufacturing costs and increase production throughput. To assist in future decision-making, DOE requested that the National Renewable Energy Laboratory (NREL) provide a baseline understanding of the current levels of adoption of automation in manufacturing processes and flow, as well as of continuous processes. NREL identified and visited or interviewed key manufacturers, universities, and laboratories relevant to the study using a standard questionnaire. The questionnaire covered the current level of vertical integration, the importance of quality control developments for automation, the current level of automation and source of automation design, critical balance of plant issues, potential for continuous cell manufacturing, key manufacturing steps or processes that would benefit from DOE support for manufacturing R&D, the potential for cell or stack design changes to support automation, and the relationship between production volume and decisions on automation.

Ulsh, M.; Wheeler, D.; Protopappas, P.

2011-08-01T23:59:59.000Z

148

Development of a combined soil-wash/in-furnace vitrification system for soil remediation at DOE sites. Final report  

SciTech Connect (OSTI)

This report addresses research and development of technologies for treatment of radioactive and hazardous waste streams at DOE sites. Weldon Spring raffinate sludges were used in a direct vitrification study to investigate their use as fluxing agents in glass formulations when blended with site soil. Storm sewer sediments from the Oak Ridge, TN, Y-12 facility were used for soil washing followed by vitrification of the concentrates. Both waste streams were extensively characterized. Testing showed that both mercury and uranium could be removed from the Y-12 soil by chemical extraction resulting in an 80% volume reduction. Thermal desorption was used on the contaminant-enriched minority fraction to separate the mercury from the uranium. Vitrification tests demonstrated that high waste loading glasses could be produced from the radioactive stream and from the Weldon Spring wastes which showed very good leach resistance, and viscosities and electrical conductivities in the range suitable for joule-heated ceramic melter (JHCM) processing. The conceptual process described combines soil washing, thermal desorption, and vitrification to produce clean soil (about 90% of the input waste stream), non-radioactive mercury, and a glass wasteform; the estimated processing costs for that system are about $260--$400/yd{sup 3}. Results from continuous melter tests performed using Duratek`s advanced JHCM (Duramelter) system are also presented. Since life cycle cost estimates are driven largely by volume reduction considerations, the large volume reductions possible with these multi-technology, blended waste stream approaches can produce a more leach resistant wasteform at a lower overall cost than alternative technologies such as cementation.

Pegg, I.L.; Guo, Y.; Lahoda, E.J.; Lai, Shan-Tao; Muller, I.S.; Ruller, J. [GTS Duratek, Columbia, MD (United States); Grant, D.C. [Westinghouse Electric Corp., Pittsburgh, PA (United States). Science and Technology Center

1993-01-01T23:59:59.000Z

149

Analysis of Biomass/Coal Co-Gasification for Integrated Gasification Combined Cycle (IGCC) Systems with Carbon Capture.  

E-Print Network [OSTI]

?? In recent years, Integrated Gasification Combined Cycle Technology (IGCC) has become more common in clean coal power operations with carbon capture and sequestration (CCS).… (more)

Long, Henry A, III

2011-01-01T23:59:59.000Z

150

Test, Evaluation, and Demonstration of Practical Devices/Systems to Reduce Aerodynamic Drag of Tractor/Semitrailer Combination Unit Trucks  

SciTech Connect (OSTI)

Class 8 heavy-duty trucks account for over three-quarters of the total diesel fuel used by commercial trucks (trucks with GVWRs more than 10,000 pounds) in the United States each year. At the highway speeds at which these trucks travel (i.e., 60 mph or greater), aerodynamic drag is a major part of total horsepower needed to move the truck down the highway, Reductions in aerodynamic drag can yield measurable benefits in fuel economy through the use of relatively inexpensive and simple devices. The goal of this project was to examine a number of aerodynamic drag reduction devices and systems and determine their effectiveness in reducing aerodynamic drag of Class 8 tractor/semitrailer combination-units, thus contributing to DOE's goal of reducing transportation petroleum use. The project team included major heavy truck manufacturers in the United States, along with the management and industry expertise of the Truck Manufacturers Association as the lead investigative organization. The Truck Manufacturers Association (TMA) is the national trade association representing the major North American manufacturers of Class 6-8 trucks (GVWRs over 19,500 lbs). Four major truck manufacturers participated in this project with TMA: Freightliner LLC; International Truck and Engine Corporation; Mack Trucks Inc.; and Volvo Trucks North America, Inc. Together, these manufacturers represent over three-quarters of total Class 8 truck sales in the United States. These four manufacturers pursued complementary research efforts as part of this project. The project work was separated into two phases conducted over a two-year period. In Phase I, candidate aerodynamic devices and systems were screened to focus research and development attention on devices that offered the most potential. This was accomplished using full-size vehicle tests, scale model tests, and computational fluid dynamics analyses. In Phase II, the most promising devices were installed on full-size trucks and their effect on fuel economy was determined, either through on-road testing or full-size wind tunnel testing. All of the manufacturers worked with devices and systems that offer practical solutions to reduce aerodynamic drag, accounting for functionality, durability, cost effectiveness, reliability, and maintainability. The project team members and their roles and responsibilities are shown in Figure 2-1. Figure 2-2 shows the Phase I and II project schedules for all four projects and associated management activities.

Scott Smith; Karla Younessi; Matt Markstaller; Dan Schlesinger; Bhaskar Bhatnagar; Donald Smith; Bruno Banceu; Ron Schoon; V.K. Sharma; Mark Kachmarsky; Srikant Ghantae; Michael Sorrels; Conal Deedy; Justin Clark; Skip Yeakel; Michael D. Laughlin; Charlotte Seigler; Sidney Diamond

2007-04-30T23:59:59.000Z

151

Integrated supercritical water gasification combined cycle (IGCC) systems for improved performance and reduced operating costs in existing plants  

SciTech Connect (OSTI)

A revolutionary hydrothermal heat recovery steam generator (HRSG) is being developed to produce clean fuels for gas turbines from slurries and emulsions of opportunity fuels. Water can be above 80% by weight and solids below 20%, including coal fines, coal water fuels, biomass, composted municipal refuse, sewage sludge and bitumen/Orimulsion. The patented HRSG tubes use a commercial method of particle scrubbing to improve heat transfer and prevent corrosion and deposition on heat transfer surfaces. A continuous-flow pilot plant is planned to test the HRSG over a wide range of operating conditions, including the supercritical conditions of water, above 221 bar (3,205 psia) and 374 C (705 F). Bench scale data shows, that supercritical water gasification below 580 C (1,076 F) and low residence time without catalysts or an oxidizer can produce a char product that can contain carbon up to the amount of fixed carbon in the proximate analysis of the solids in the feed. This char can be burned with coal in an existing combustion system to provide the heat required for gasification. The new HRSG tubes can be retrofitted into existing power plant boilers for repowering of existing plants for improved performance and reduced costs. A special condensing turbine allows final low-temperature cleaning and maintains quality and combustibility of the fuel vapor for modern gas turbine in the new Vapor Transmission Cycle (VTC). Increased power output and efficiency can be provided for existing plants, while reducing fuel costs. A preliminary computer-based process simulation model has been prepared that includes material and energy balances that simulate commercial-scale operations of the VTC on sewage sludge and coal. Results predict over 40% HHV thermal efficiency to electric power from sewage sludge at more than 83% water by weight. The system appears to become autothermal (no supplemental fuel required) at about 35% fixed carbon in the feed. Thus, bituminous and lignite coal slurries could be gasified at less than 25% coal and more than 75% water. Preliminary life cycle cost analyses indicate that disposal fees for sewage sludge improve operating economics over fuel that must be purchased, the cost and schedule advantages of natural gas-fired combined cycle systems are preserved. Sensitivity analyses show that increasing capital costs by 50% can be offset by an increase in sewage sludge disposal fees of $10/metric ton.

Tolman, R.; Parkinson, W.J.

1999-07-01T23:59:59.000Z

152

Power combiner  

DOE Patents [OSTI]

A power combiner for the combining of symmetric and asymmetric traveling wave energy comprises a feed waveguide having an input port and a launching port, a reflector for reflecting launched wave energy, and a final waveguide for the collection and transport of launched wave energy. The power combiner has a launching port for symmetrical waves which comprises a cylindrical section coaxial to the feed waveguide, and a launching port for asymmetric waves which comprises a sawtooth rotated about a central axis.

Arnold, Mobius; Ives, Robert Lawrence

2006-09-05T23:59:59.000Z

153

Heterosis and combining ability among two cytoplasmic sterility systems and representation of different taxonomic classes of sorghum  

E-Print Network [OSTI]

of sorghum; (2) determine the magnitude of heterosis existing with! n the several Taxonomic pools and the relative importance of general combining ability (GCA) and specific combining ability (SCA) in each. The study of fertility restorers of male... vs Az were significantly different. That means A, and Az hybrids were significantly different. Both GCA and SCA effects were significant for most characters. The GCA effects appeared to be more important for grain yield in Ai cytoplasm, while...

Kenga, Richard

1989-01-01T23:59:59.000Z

154

The Added Economic and Environmental Value of Solar Thermal Systems in Microgrids with Combined Heat and Power  

E-Print Network [OSTI]

Environmental Value of Solar Thermal Systems in MicrogridsEnvironmental Value of Solar Thermal Systems in Microgridsa) ABSTRACT The addition of solar thermal and heat storage

Marnay, Chris

2010-01-01T23:59:59.000Z

155

Combined on-board hydride slurry storage and reactor system and process for hydrogen-powered vehicles and devices  

DOE Patents [OSTI]

An on-board hydride storage system and process are described. The system includes a slurry storage system that includes a slurry reactor and a variable concentration slurry. In one preferred configuration, the storage system stores a slurry containing a hydride storage material in a carrier fluid at a first concentration of hydride solids. The slurry reactor receives the slurry containing a second concentration of the hydride storage material and releases hydrogen as a fuel to hydrogen-power devices and vehicles.

Brooks, Kriston P; Holladay, Jamelyn D; Simmons, Kevin L; Herling, Darrell R

2014-11-18T23:59:59.000Z

156

Int. J. of Heavy Vehicle Systems, Vol. 11, Nos 3/4, 2004 372 Combined optimisation of design and power  

E-Print Network [OSTI]

there is a significant body of work related to hybrid passenger cars and light commercial trucks, there are many open and power management of the hydraulic hybrid propulsion system for the 6 Ś 6 medium truck Z. Filipi*, L, MI 48109-2121, USA National Automotive Center, US Army RDECOM Abstract: Hybrid propulsion systems

Papalambros, Panos

157

Hydrogen-or-Fossil-Combustion Nuclear Combined-Cycle Systems for Base- and Peak-Load Electricity Production  

SciTech Connect (OSTI)

A combined-cycle power plant is described that uses (1) heat from a high-temperature nuclear reactor to meet base-load electrical demands and (2) heat from the same high-temperature reactor and burning natural gas, jet fuel, or hydrogen to meet peak-load electrical demands. For base-load electricity production, fresh air is compressed; then flows through a heat exchanger, where it is heated to between 700 and 900 C by heat provided by a high-temperature nuclear reactor via an intermediate heat-transport loop; and finally exits through a high-temperature gas turbine to produce electricity. The hot exhaust from the Brayton-cycle gas turbine is then fed to a heat recovery steam generator that provides steam to a steam turbine for added electrical power production. To meet peak electricity demand, the air is first compressed and then heated with the heat from a high-temperature reactor. Natural gas, jet fuel, or hydrogen is then injected into the hot air in a combustion chamber, combusts, and heats the air to 1300 C-the operating conditions for a standard natural-gas-fired combined-cycle plant. The hot gas then flows through a gas turbine and a heat recovery steam generator before being sent to the exhaust stack. The higher temperatures increase the plant efficiency and power output. If hydrogen is used, it can be produced at night using energy from the nuclear reactor and stored until needed. With hydrogen serving as the auxiliary fuel for peak power production, the electricity output to the electric grid can vary from zero (i.e., when hydrogen is being produced) to the maximum peak power while the nuclear reactor operates at constant load. Because nuclear heat raises air temperatures above the auto-ignition temperatures of the various fuels and powers the air compressor, the power output can be varied rapidly (compared with the capabilities of fossil-fired turbines) to meet spinning reserve requirements and stabilize the electric grid. This combined cycle uses the unique characteristics of high-temperature reactors (T>700 C) to produce electricity for premium electric markets whose demands can not be met by other types of nuclear reactors. It may also make the use of nuclear reactors economically feasible in smaller electrical grids, such as those found in many developing countries. The ability to rapidly vary power output can be used to stabilize electric grid performance-a particularly important need in small electrical grids.

Forsberg, Charles W [ORNL; Conklin, Jim [ORNL

2007-09-01T23:59:59.000Z

158

Portland Community College Celebrates Commissioning of Combined...  

Broader source: Energy.gov (indexed) [DOE]

Portland Community College Celebrates Commissioning of Combined Heat and Power Fuel Cell System Portland Community College Celebrates Commissioning of Combined Heat and Power Fuel...

159

Apparatus and methods of reheating gas turbine cooling steam and high pressure steam turbine exhaust in a combined cycle power generating system  

DOE Patents [OSTI]

In a combined cycle system having a multi-pressure heat recovery steam generator, a gas turbine and steam turbine, steam for cooling gas turbine components is supplied from the intermediate pressure section of the heat recovery steam generator supplemented by a portion of the steam exhausting from the HP section of the steam turbine, steam from the gas turbine cooling cycle and the exhaust from the HP section of the steam turbine are combined for flow through a reheat section of the HRSG. The reheated steam is supplied to the IP section inlet of the steam turbine. Thus, where gas turbine cooling steam temperature is lower than optimum, a net improvement in performance is achieved by flowing the cooling steam exhausting from the gas turbine and the exhaust steam from the high pressure section of the steam turbine in series through the reheater of the HRSG for applying steam at optimum temperature to the IP section of the steam turbine.

Tomlinson, Leroy Omar (Niskayuna, NY); Smith, Raub Warfield (Ballston Lake, NY)

2002-01-01T23:59:59.000Z

160

Crack stability in a representative piping system under combined inertial and seismic/dynamic displacement-controlled stresses. Subtask 1.3 final report  

SciTech Connect (OSTI)

This report presents the results from Subtask 1.3 of the International Piping Integrity Research Group (IPIRG) program. The objective of Subtask 1.3 is to develop data to assess analysis methodologies for characterizing the fracture behavior of circumferentially cracked pipe in a representative piping system under combined inertial and displacement-controlled stresses. A unique experimental facility was designed and constructed. The piping system evaluated is an expansion loop with over 30 meters of 16-inch diameter Schedule 100 pipe. The experimental facility is equipped with special hardware to ensure system boundary conditions could be appropriately modeled. The test matrix involved one uncracked and five cracked dynamic pipe-system experiments. The uncracked experiment was conducted to evaluate piping system damping and natural frequency characteristics. The cracked-pipe experiments evaluated the fracture behavior, pipe system response, and stability characteristics of five different materials. All cracked-pipe experiments were conducted at PWR conditions. Material characterization efforts provided tensile and fracture toughness properties of the different pipe materials at various strain rates and temperatures. Results from all pipe-system experiments and material characterization efforts are presented. Results of fracture mechanics analyses, dynamic finite element stress analyses, and stability analyses are presented and compared with experimental results.

Scott, P.; Olson, R.; Wilkowski, O.G.; Marschall, C.; Schmidt, R.

1997-06-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Combined process for 2,4-Dichlorophenoxyacetic acid treatment Coupling of an electrochemical system with a biological treatment.  

E-Print Network [OSTI]

system with a biological treatment. Jean-Marie Fontmorina,b *, Florence Fourcadea,b Florence Genestec-made electrochemical flow cell was used for the pre-treatment and a biological treatment was then carried out using activated sludge supplied by a local wastewater treatment plant. 2,4-D was used as a target compound

Paris-Sud XI, Université de

162

Reanalyses of Anomalous Gravitational Microlensing Events in the OGLE-III Early Warning System Database with Combined Data  

E-Print Network [OSTI]

We reanalyze microlensing events in the published list of anomalous events that were observed from the OGLE lensing survey conducted during 2004-2008 period. In order to check the existence of possible degenerate solutions and extract extra information, we conduct analyses based on combined data from other survey and follow-up observation and consider higher-order effects. Among the analyzed events, we present analyses of 8 events for which either new solutions are identified or additional information is obtained. We find that the previous binary-source interpretations of 5 events are better interpreted by binary-lens models. These events include OGLE-2006-BLG-238, OGLE-2007-BLG-159, OGLE-2007-BLG-491, OGLE-2008-BLG-143, and OGLE-2008-BLG-210. With additional data covering caustic crossings, we detect finite-source effects for 6 events including OGLE-2006-BLG-215, OGLE-2006-BLG-238, OGLE-2006-BLG-450, OGLE-2008-BLG-143, OGLE-2008-BLG-210, and OGLE-2008-BLG-513. Among them, we are able to measure the Einstein ...

Jeong, J; Han, C; Gould, A; Udalski, A; Szyma?ski, M K; Pietrzy?ski, G; Soszy?ski, I; Poleski, R; Ulaczyk, K; Wyrzykowski, ?; Abe, F; Bennett, D P; Bond, I A; Botzler, C S; Freeman, M; Fukui, A; Fukunaga, D; Itow, Y; Koshimoto, N; Masuda, K; Matsubara, Y; Muraki, Y; Namba, S; Ohnishi, K; Rattenbury, N J; Saito, To; Sullivan, D J; Sweatman, W L; Sumi, T; Suzuki, D; Tristram, P J; Tsurumi, N; Wada, K; Yamai, N; Yock, P C M; Yonehara, A; Albrow, M D; Batista, V; Beaulieu, J -P; Caldwell, J A R; Cassan, A; Cole, A; Coutures, C; Dieters, S; Dominik, M; Prester, D Dominis; Donatowicz, J; Fouqué, P; Greenhill, J; Hoffman, M; Huber, M; Jűrgensen, U G; Kane, S R; Kubas, D; Martin, R; Marquette, J -B; Menzies, J; Pitrou, C; Pollard, K; Sahu, K C; Vinter, C; Wambsganss, J; Williams, A; Allen, W; Bolt, G; Choi, J -Y; Christie, G W; DePoy, D L; Drummond, J; Gaudi, B S; Hwang, K -H; Jung, Y K; Lee, C -U; Mallia, F; Maoz, D; Maury, A; McCormick, J; Monard, L A G; Moorhouse, D; Natusch, T; Ofek, E O; Park, B -G; Pogge, R W; Santallo, R; Shin, I -G; Thornley, G; Yee, J C; Bramich, D M; Horne, K; Hundertmark, M; Kains, N; Snodgrass, C; Steele, I; Street, R; Tsapras, Y

2015-01-01T23:59:59.000Z

163

Southwestern Federal Power System combined financial statements and supplemental schedules for the years ended September 30, 1994 and 1993  

SciTech Connect (OSTI)

The Southwestern Federal Power System encompasses the operation of 24 hydroelectric power plants by the US Army Corps of Engineers and the marketing of power and energy from those plants by Southwestern Power Administration of the US Department of Energy. To integrate the operation of these hydroelectric generating plants and to transmit power from the dams to its customers, Southwestern Power Administration (Southwestern) maintains 2,220 kilometers (1,380 miles) of high-voltage transmission lines, 24 substations, and 46 microwave and VHF radio sites. Southwestern`s headquarters are in Tulsa, Oklahoma; its dispatch center is in Springfield, Missouri; and its maintenance crews are based in Jonesboro, Arkansas, in Gore and Tupelo, Oklahoma, and in Springfield, Missouri. Three divisions - Administration and Rates, Power Marketing and Delivery, and Maintenance - are responsible for meeting Southwestern`s mission. Twelve of the 24 generating plants are scheduled directly by Southwestern, and a total of 19 contribute to the interconnected system operations. Generation at the five remaining projects (Denison, Narrows, Sam Rayburn, Whitney, and Willis) is used to serve specific customer loads. At the end of fiscal year 1994, Southwestern marketed power and energy to 10 generation and transmission cooperatives, one distribution cooperative, three military installations, 41 municipal utilities, and three municipal utility joint-action agencies. One of the joint-action agencies has its own allocation of power from Southwestern; the other two serve 34 municipal utilities to whom Southwestern has allocated power. The total number of power allocation customers is 92. Additionally, excess energy is occasionally sold to non-allocation utilities. The primary purposes of Southwestern are to market Federally generated hydroelectric power, operate a reliable and safe transmission system, and encourage energy efficiency for the benefit of the region.

Marwick, P.

1994-12-31T23:59:59.000Z

164

Energy and cost analysis of a solar-hydrogen combined heat and power system for remote power supply using a computer simulation  

SciTech Connect (OSTI)

A simulation program, based on Visual Pascal, for sizing and techno-economic analysis of the performance of solar-hydrogen combined heat and power systems for remote applications is described. The accuracy of the submodels is checked by comparing the real performances of the system's components obtained from experimental measurements with model outputs. The use of the heat generated by the PEM fuel cell, and any unused excess hydrogen, is investigated for hot water production or space heating while the solar-hydrogen system is supplying electricity. A 5 kWh daily demand profile and the solar radiation profile of Melbourne have been used in a case study to investigate the typical techno-economic characteristics of the system to supply a remote household. The simulation shows that by harnessing both thermal load and excess hydrogen it is possible to increase the average yearly energy efficiency of the fuel cell in the solar-hydrogen system from just below 40% up to about 80% in both heat and power generation (based on the high heating value of hydrogen). The fuel cell in the system is conventionally sized to meet the peak of the demand profile. However, an economic optimisation analysis illustrates that installing a larger fuel cell could lead to up to a 15% reduction in the unit cost of the electricity to an average of just below 90 c/kWh over the assessment period of 30 years. Further, for an economically optimal size of the fuel cell, nearly a half the yearly energy demand for hot water of the remote household could be supplied by heat recovery from the fuel cell and utilising unused hydrogen in the exit stream. Such a system could then complement a conventional solar water heating system by providing the boosting energy (usually in the order of 40% of the total) normally obtained from gas or electricity. (author)

Shabani, Bahman; Andrews, John; Watkins, Simon [School of Aerospace Mechanical and Manufacturing Engineering, RMIT University, Melbourne (Australia)

2010-01-15T23:59:59.000Z

165

Optimizal design and control strategies for novel Combined Heat and Power (CHP) fuel cell systems. Part II of II, case study results.  

SciTech Connect (OSTI)

Innovative energy system optimization models are deployed to evaluate novel fuel cell system (FCS) operating strategies, not typically pursued by commercial industry. Most FCS today are installed according to a 'business-as-usual' approach: (1) stand-alone (unconnected to district heating networks and low-voltage electricity distribution lines), (2) not load following (not producing output equivalent to the instantaneous electrical or thermal demand of surrounding buildings), (3) employing a fairly fixed heat-to-power ratio (producing heat and electricity in a relatively constant ratio to each other), and (4) producing only electricity and no recoverable heat. By contrast, models discussed here consider novel approaches as well. Novel approaches include (1) networking (connecting FCSs to electrical and/or thermal networks), (2) load following (having FCSs produce only the instantaneous electricity or heat demanded by surrounding buildings), (3) employing a variable heat-to-power ratio (such that FCS can vary the ratio of heat and electricity they produce), (4) co-generation (combining the production of electricity and recoverable heat), (5) permutations of these together, and (6) permutations of these combined with more 'business-as-usual' approaches.

Colella, Whitney G.

2010-04-01T23:59:59.000Z

166

Optimal design and control strategies for novel combined heat and power (CHP) fuel cell systems. Part II of II, case study results.  

SciTech Connect (OSTI)

Innovative energy system optimization models are deployed to evaluate novel fuel cell system (FCS) operating strategies, not typically pursued by commercial industry. Most FCS today are installed according to a 'business-as-usual' approach: (1) stand-alone (unconnected to district heating networks and low-voltage electricity distribution lines), (2) not load following (not producing output equivalent to the instantaneous electrical or thermal demand of surrounding buildings), (3) employing a fairly fixed heat-to-power ratio (producing heat and electricity in a relatively constant ratio to each other), and (4) producing only electricity and no recoverable heat. By contrast, models discussed here consider novel approaches as well. Novel approaches include (1) networking (connecting FCSs to electrical and/or thermal networks), (2) load following (having FCSs produce only the instantaneous electricity or heat demanded by surrounding buildings), (3) employing a variable heat-to-power ratio (such that FCS can vary the ratio of heat and electricity they produce), (4) co-generation (combining the production of electricity and recoverable heat), (5) permutations of these together, and (6) permutations of these combined with more 'business-as-usual' approaches. The detailed assumptions and methods behind these models are described in Part I of this article pair.

Colella, Whitney G.

2010-06-01T23:59:59.000Z

167

Exergy method of power plant systems analysis and its application to a pressurized fluidized bed coal-fired combined-cycle power plant  

SciTech Connect (OSTI)

This thesis surveys the concepts of exergy and extends the exergy method of analysis from the standpoint of its applications to the power plant systems. After a brief historical review of exergy concepts, the general exergy equation is derived from the combined equation of First and Second Law, and it is shown that any special case of exergy equation is a simplified form of the general exergy equation. The mathematical method for the exergy analysis of a steady-state, steady-flow system, analogous to that of the First Law, is given. The exergy losses in a power plant are discussed. Then in order to examine these losses, the Second Law performance of major processes of combustion, compression, heat transfer, mixing and throttling have been analyzed analytically, and the exergy efficiencies are defined that accurately assess the thermodynamic performance of the corresponding processes. The methods for computation of exergy loss and exergy efficiency are given and simplified for practical cases of the corresponding processes. Analytical methods for evaluating the exergy of coal, pure substances (air and water), and combustion gases are presented and the energy-exergy tables for corresponding working substances are constructed. Finally, a comprehensive thermodynamic analysis, with emphasis on the Second Law (exergy) consideration, of an actual coal-fired, combined-cycle (CFCC) power plant, being designed by the General Electric Company, is carried out and suggestions are made as to what (and where), if any, improvement might be made in the design.

Ghamarian, A.

1981-01-01T23:59:59.000Z

168

THIN SECTION DESCRIPTIONS: LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO  

SciTech Connect (OSTI)

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field in Utah (figure 1). However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.

David E. Eby; Laura L. Wray

2003-12-01T23:59:59.000Z

169

Enhanced geothermal systems (EGS) with CO2 as heat transmission fluid--A scheme for combining recovery of renewable energy with geologic storage of CO2  

E-Print Network [OSTI]

Approach for Generating Renewable Energy with SimultaneousCombining Recovery of Renewable Energy with Geologic Storage

Pruess, K.

2010-01-01T23:59:59.000Z

170

Survey of Emissions Models for Distributed Combined Heat and...  

Broader source: Energy.gov (indexed) [DOE]

Survey of Emissions Models for Distributed Combined Heat and Power Systems, 2007 Survey of Emissions Models for Distributed Combined Heat and Power Systems, 2007 The models...

171

Comparison of Fusion Imaging Using a Combined SPECT/CT System and Intra-arterial CT: Assessment of Drug Distribution by an Implantable Port System in Patients Undergoing Hepatic Arterial Infusion Chemotherapy  

SciTech Connect (OSTI)

Hepatic arterial infusion (HAI) chemotherapy is effective for treating primary and metastatic carcinoma of the liver. We compared the perfusion patterns of HAI chemotherapy on intra-arterial port-catheter computed tomography (iapc-CT) and fused images obtained with a combined single-photon emission computed tomography/computed tomography (SPECT/CT) system. We studied 28 patients with primary or metastatic carcinoma of the liver who bore an implantable HAI port system. All underwent abdominal SPECT using Tc-99m-MAA (185 Mbq); the injection rate was 1 mL/min, identical to the chemotherapy infusion rate, and 0.5 mL/sec for iapc-CT. Delivery was through an implantable port. We compared the intrahepatic perfusion (IHP) and extrahepatic perfusion (EHP) patterns of HAI chemotherapy on iapc-CT images and fused images obtained with a combined SPECT/CT system. In 23 of 28 patients (82%), IHP patterns on iapc-CT images and fused images were identical. In 5 of the 28 patients (18%), IHP on fusion images was different from IHP on iapc-CT images. EHP was seen on fused images in 12 of the 28 patients (43%) and on iapc-CT images in 8 patients (29%). In 17 patients (61%), upper gastrointestinal endoscopy revealed gastroduodenal mucosal lesions. EHP was revealed on fused images in 10 of these patients; 9 of them manifested gastroduodenal toxicity at the time of subsequent HAI chemotherapy. Fusion imaging using the combined SPECT/CT system reflects the actual distribution of the infused anticancer agent. This information is valuable not only for monitoring adequate drug distribution but also for avoiding potential extrahepatic complications.

Ikeda, Osamu, E-mail: osamu-3643ik@do9.enjoy.ne.jp; Kusunoki, Shinichiroh; Nakaura, Takeshi; Shiraishi, Shinya; Kawanaka, Kouichi; Tomiguchi, Seiji; Yamashita, Yasuyuki [Kumamoto University Graduate School of Medical and Pharmaceutical Sciences, Department of Diagnostic Radiology (Japan); Takamori, Hiroshi; Chikamoto, Akira; Kanemitsu, Keiichiro [Kumamoto University Graduate School of Medical and Pharmaceutical Sciences, Gastroenterological Surgery (Japan)

2006-06-15T23:59:59.000Z

172

Optimal design and control strategies for novel combined heat and power (CHP) fuel cell systems. Part I of II, datum design conditions and approach.  

SciTech Connect (OSTI)

Energy network optimization (ENO) models identify new strategies for designing, installing, and controlling stationary combined heat and power (CHP) fuel cell systems (FCSs) with the goals of (1) minimizing electricity and heating costs for building owners and (2) reducing emissions of the primary greenhouse gas (GHG) - carbon dioxide (CO{sub 2}). A goal of this work is to employ relatively inexpensive simulation studies to discover more financially and environmentally effective approaches for installing CHP FCSs. ENO models quantify the impact of different choices made by power generation operators, FCS manufacturers, building owners, and governments with respect to two primary goals - energy cost savings for building owners and CO{sub 2} emission reductions. These types of models are crucial for identifying cost and CO{sub 2} optima for particular installations. Optimal strategies change with varying economic and environmental conditions, FCS performance, the characteristics of building demand for electricity and heat, and many other factors. ENO models evaluate both 'business-as-usual' and novel FCS operating strategies. For the scenarios examined here, relative to a base case of no FCSs installed, model results indicate that novel strategies could reduce building energy costs by 25% and CO{sub 2} emissions by 80%. Part I of II articles discusses model assumptions and methodology. Part II of II articles illustrates model results for a university campus town and generalizes these results for diverse communities.

Colella, Whitney G.

2010-06-01T23:59:59.000Z

173

Enhanced geothermal systems (EGS) with CO2 as heat transmission fluid--A scheme for combining recovery of renewable energy with geologic storage of CO2  

E-Print Network [OSTI]

Could Sequestration of CO2 be Combined with the DevelopmentTOUGH2 Code for Studies of CO2 Storage in Saline Aquifers,and J. Ennis- King. CO2-H2O Mixtures in the Geological

Pruess, K.

2010-01-01T23:59:59.000Z

174

CONSULTANT REPORT COMBINED HEAT AND POWER  

E-Print Network [OSTI]

CONSULTANT REPORT COMBINED HEAT AND POWER: POLICY ANALYSIS AND 2011 ­ 2030 MARKET ASSESSMENT This report analyzes the potential market penetration of combined heat and power systems in California from 2011 to 2030. This analysis evaluates the potential contribution of new combined heat and power

175

CONSULTANT REPORT COMBINED HEAT AND POWER  

E-Print Network [OSTI]

CONSULTANT REPORT COMBINED HEAT AND POWER: POLICY ANALYSIS AND 2011 ­ 2030 MARKET ASSESSMENT ABSTRACT This report analyzes the potential market penetration of combined heat and power systems the markets, applications, technologies, and economic competition for combined heat and power over

176

Final Report: Assessment of Combined Heat and Power Premium Power Applications in California  

E-Print Network [OSTI]

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM “PREMIUM POWER”Assessment of Combined Heat and Power Premium Power1 The Pacific Region Combined Heat and Power Application

Norwood, Zack

2010-01-01T23:59:59.000Z

177

Effects of a shortened depreciation schedule on the investment costs for combined heat and power  

E-Print Network [OSTI]

generation and combined heat and power, Trigen Energypower generation combined heat and power, EnvironmentalInvestment Costs for Combined Heat and Power Systems Nicole

Kranz, Nicole; Worrell, Ernst

2001-01-01T23:59:59.000Z

178

Enhanced geothermal systems (EGS) with CO2 as heat transmission fluid--A scheme for combining recovery of renewable energy with geologic storage of CO2  

E-Print Network [OSTI]

Interactions in Enhanced Geothermal Systems (EGS) with CO 2Fluid, Proceedings, World Geothermal Congress 2010, Bali,Remain? Transactions, Geothermal Resources Council, Vol. 17,

Pruess, K.

2010-01-01T23:59:59.000Z

179

Southwest Gas Corporation- Combined Heat and Power Program  

Broader source: Energy.gov [DOE]

Southwest Gas Corporation (SWG) offers incentives to qualifying commercial and industrial facilities who install efficient Combined Heat and Power systems (CHP). CHP systems produce localized, on...

180

RAPID/Roadmap/3-UT-e | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExploration

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

RAPID/Roadmap/14-UT-e | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to: navigation, search RAPIDColorado < RAPID‎ |1-TX-a13-ID-a4-NV-c14-OR-dd <

182

Southern Ute Alternative Energy LLC | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia:FAQ < RAPID Jump to:Seadov Pty Ltd JumpGTZHolland, Illinois:5717551° LoadingSoutheastSRF

183

Combined Heat and Power Research and Development  

Broader source: Energy.gov (indexed) [DOE]

of CHP systems and components as well as expanded use of opportunity fuels Combined Heat & Power Activities Develop a state-of-the-art, large-bore, single-cylinder engine...

184

Crankshaft position sensing with combined starter alternator  

DOE Patents [OSTI]

A crankshaft position sensing apparatus for use with an engine (16) having a combined starter/alternator assembly (18). The crankshaft position sensing apparatus includes a tone ring (38) with a sensor (36) and bandpass filter (46), having a cylinder identification input from a camshaft sensor (48), and a gain limiter (54). The sensing apparatus mounts near the rotor (30) of the combined starter/alternator assembly (18). The filtered crankshaft position signal can then be input into a vehicle system controller (58) and an inner loop controller (60). The starter/alternator assembly (18) in combination with an internal combustion engine is particularly useful for a hybrid electric vehicle system.

Brandenburg, Larry Raymond (Plymouth, MI); Miller, John Michael (Saline, MI)

2000-06-13T23:59:59.000Z

185

Klystron-linac combination  

DOE Patents [OSTI]

A combination klystron-linear accelerator which utilizes anti-bunch electrons generated in the klystron section as a source of electrons to be accelerated in the accelerator section. Electron beam current is controlled by second harmonic bunching, constrictor aperture size and magnetic focusing. Rf coupling is achieved by internal and external coupling.

Stein, W.E.

1980-04-24T23:59:59.000Z

186

Combined Cycle Combustion Turbines  

E-Print Network [OSTI]

Combined Cycle Combustion Turbines Steven Simmons February 27 2014 1 #12;CCCT Today's Discussion 1 Meeting Pricing of 4 advanced units using information from Gas Turbine World Other cost estimates from E E3 EIA Gas Turbine World California Energy Commission Date 2010 Oct 2012, Dec 2013 Apr 2013 2013 Apr

187

Hydrogen storage in a combined M.sub.xAlH.sub.6/M'.sub.y(NH.sub.2).sub.z system and methods of making and using the same  

DOE Patents [OSTI]

As a promising clean fuel for vehicles, hydrogen can be used for propulsion, either directly or in fuel cells. Hydrogen storage compositions having high storage capacity, good dehydrogenation kinetics, and hydrogen release and uptake reactions which are reversible are disclosed and described. Generally a hydrogen storage composition of a metal aluminum hexahydride and a metal amide can be used. A combined system (Li.sub.3AIH.sub.6/3LiNH.sub.2) with a very high inherent hydrogen capacity (7.3 wt %) can be carried out at moderate temperatures, and with approximately 95% of that inherent hydrogen storage capacity (7.0%) is reversible over repeated cycling of release and uptake.

Lu, Jun (Salt Lake City, UT); Fang, Zhigang Zak (Salt Lake City, UT); Sohn, Hong Yong (Salt Lake City, UT)

2012-04-03T23:59:59.000Z

188

The Variational Inequality Approach for Solving Spatial Auction ...  

E-Print Network [OSTI]

Kazan 420008, Russia. E-mail: ikonnov@ksu.ru. March 23, 2007. Abstract. We consider a problem of managing a system of spatially distrib- uted markets under

2007-03-23T23:59:59.000Z

189

Using Single-Molecule Imaging System Combined  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

conditions are used for these tests. The additives in fracturing fluids may impact fracture permeability, rock wettability, and liquid intake, thus influencing gas flow. To...

190

Using Single-Molecule Imaging System Combined  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism inS-4500II Field Emission SEMUsedUserUsingelectronEnergy Innovation

191

Easley Combined Utility System | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Power Basics (The followingDirectLow CarbonOpen1 June, 2013 - 09:33

192

The combined Îœ  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched Ferromagnetism in Layered NbS2 andThe MolecularPlaceThe publication of4combined Μ ”

193

E-Print Network 3.0 - actinides combined estimation Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of the same nuclear system combining a powerful particle accelerator with a subcritical reactor... . The idea of combining powerful accelerators - with a subcritical...

194

Combined effect of chemical pressure and valence electron concentration through the electron-deficient Li substitution on the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system  

SciTech Connect (OSTI)

Four members of the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system have been prepared by high-temperature reaction method and characterized by X-ray diffractions. All compounds crystallize in the orthorhombic Gd{sub 5}Si{sub 4}-type structure (space group Pnma, Pearson code oP16) with bonding interactions for interslab Ge{sub 2} dimers. The Li substitution for rare-earth elements in the RE{sub 4}LiGe{sub 4} system leads to a combined effect of the increased chemical pressure and the decreased valance electron concentration (VEC), which eventually results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type with all broken interslab Ge–Ge bond for the parental RE{sub 5}Ge{sub 4} to the Gd{sub 5}Si{sub 4}-type structure for the ternary RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. Site-preference between rare-earth metals and Li is proven to generate energetically the most favorable atomic arrangements according to coloring-problem, and the rationale is provided using both the size-factor and the electronic-factor related, respectively, to site-volume and electronegativity as well as QVAL values. Tight-binding, linear-muffin-tin-orbital (TB-LMTO) calculations are performed to investigate electronic densities of states (DOS) and crystal orbital Hamilton population (COHP) curves. The influence of reduced VEC for chemical bonding including the formation of interslab Ge{sub 2} dimers is also discussed. The magnetic property measurements prove that the non-magnetic Li substitution leads to the ferromagnetic (FM)-like ground state for Ce{sub 4}LiGe{sub 4} and the co-existence of antiferromagntic (AFM) and FM ground states for Sm{sub 4}LiGe{sub 4}. - Graphical abstract: Reported is a combined effect of the chemical pressure and the reduced VEC caused by the smaller monovalent non-magnetic Li substitution for the larger trivalent magnetic rare-earth metals in the RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr, and Sm) system. This results in the structure transformation from the Sm{sub 5}Ge{sub 4}-type to the Gd{sub 5}Si{sub 4}-type structure and the changes in magnetic properties. Display Omitted - Highlights: • Four Li-containing intermetallic compounds RE{sub 4}LiGe{sub 4} (RE=La, Ce, Pr and Sm) were synthesized. • The combined effect of the chemical pressure and the reduced VEC caused by Li substitution for a rare-earth metal results in the structure transformation. • Electronic structures and magnetic properties of title compounds were thoroughly investigated.

Nam, Gnu; Jeon, Jieun; Kim, Youngjo [Department of Chemistry, Chungbuk National University, Cheongju, Chungbuk 361-763 (Korea, Republic of); Kwon Kang, Sung [Department of Chemistry, Chungnam National University, Daejeon, Chungnam 305-764 (Korea, Republic of); Ahn, Kyunghan [Advanced Materials Research Center, Samsung Advanced Institute of Technology, Yongin-si, Gyeonggi-do 446-712 (Korea, Republic of); You, Tae-Soo, E-mail: tsyou@chungbuk.ac.kr [Department of Chemistry, Chungbuk National University, Cheongju, Chungbuk 361-763 (Korea, Republic of)

2013-09-15T23:59:59.000Z

195

Combined cycle meets Thailand's growing power demands  

SciTech Connect (OSTI)

This article describes how an ample supply of natural gas led the Electricity Generating Authority of Thailand (EGAT) to choose gas-fired combustion turbines. Thailand's rapid industrialization, which began in the late 1980's, placed a great strain on the country's electricity supply system. The demand for electricity grew at an astonishing 14% annually. To deal with diminishing reserve capacity margins, the EGAT announced, in 1988, a power development program emphasizing gas-fired combined cycle power plants. Plans included six 320-MW combined cycle blocks at three sites, and an additional 600-MW gas- and oil-fired thermal plant at Bang Pakong. As electricity demand continued to increase, EGAT expanded its plans to include two additional 320-MW combined cycle blocks, a 600-MW combined cycle block, and a 650-MW gas- and oil-fired thermal plant. All are currently in various stages of design and construction.

Sheets, B.A. (Black and Veatch, Kansas City, MO (United States)); Takabut, K. (Electricity Generating Authority of Thailand, Nonthaburi (Thailand))

1993-08-01T23:59:59.000Z

196

Biomass Gasification Combined Cycle  

SciTech Connect (OSTI)

Gasification combined cycle continues to represent an important defining technology area for the forest products industry. The ''Forest Products Gasification Initiative'', organized under the Industry's Agenda 2020 technology vision and supported by the DOE ''Industries of the Future'' program, is well positioned to guide these technologies to commercial success within a five-to ten-year timeframe given supportive federal budgets and public policy. Commercial success will result in significant environmental and renewable energy goals that are shared by the Industry and the Nation. The Battelle/FERCO LIVG technology, which is the technology of choice for the application reported here, remains of high interest due to characteristics that make it well suited for integration with the infrastructure of a pulp production facility. The capital cost, operating economics and long-term demonstration of this technology area key input to future economically sustainable projects and must be verified by the 200 BDT/day demonstration facility currently operating in Burlington, Vermont. The New Bern application that was the initial objective of this project is not currently economically viable and will not be implemented at this time due to several changes at and around the mill which have occurred since the inception of the project in 1995. The analysis shows that for this technology, and likely other gasification technologies as well, the first few installations will require unique circumstances, or supportive public policies, or both to attract host sites and investors.

Judith A. Kieffer

2000-07-01T23:59:59.000Z

197

Combination and Implementation of Processes and Data  

E-Print Network [OSTI]

Combination and Implementation of Processes and Data: from CSP­OZ to Java Clemens Fischer. They are not only used in huge companies and systems like insurance companies, banks or power plants, but also on that state in a predicative way using Z notation. ffl CSP (Communicating Sequential Processes) is a process

Habel, Annegret

198

Renewable Combined Heat and Power Dairy Operations  

E-Print Network [OSTI]

horsepower Guascor model SFGLD-560 biogas-fired lean burn internal combustion (IC) engine and generator set and modify the existing biogas toelectricity combined heat and power (CHP) system operated at Fiscalini bacteria to remove hydrogen sulfide presented in the biogas. Source: Fiscalini Farms Term: March 2011

199

Combining ESP and baghouse technology  

SciTech Connect (OSTI)

The authors present a progressive application in the field of air pollution control technology. The content of this paper should appeal to operators who must operate out-of-compliance electrostatic precipitators (ESPs), or to those who strive for optimal emission control. St. Lawrence Cement Company, a plant in Beauport Canada, has been in operation since 1955. Their two wet process kilns have utilized electrostatic precipitator (ESP) filters since inception. Since 1965, this company has strived to reduce energy consumption by using alternative waste fuel. This, combined with the increased demand of low alkali cement, took its toll on the ESPs, causing the equipment and its performance to deteriorate. Pressure from environmental agencies to lower outlet emissions forced the company to consider ESP modifications. After investigating several alternatives, the optimal modification was to combine the ESP with bag filters. In addition to being the best choice from a performance standpoint, it was also the least expensive. This modification also allowed a reduced alkali dust from the ESP hoppers to be recirculated to the kilns. The latter two-thirds of the ESP were converted to a baghouse, and optimal system performance was achieved by using high efficiency expanded polytetrafluoroethylene (ePTFE) membrane filter bags. Despite the high moisture, submicron particle size, and cohesive nature of the alkaline dust, very low pressure differentials and extremely low emissions were achieved. Most notably, this complex project was completed within nine months, from concept to commissioning. The plant was shut down for only six weeks during the entire retrofit process. This economically attractive idea was readily accepted by St. Lawrence Cement personnel and the permitting agencies. After the first successful kiln/ESP retrofit, the second kiln/ESP conversion was completed the following year.

Rowland, B.; Ganatra, C.P.; Woolston, J. [W.L. Gore & Associates, Inc., Elkton, MD (United States)

1994-12-31T23:59:59.000Z

200

Accelerating Combined Heat & Power Deployment  

Broader source: Energy.gov (indexed) [DOE]

ACCELERATING COMBINED HEAT & POWER DEPLOYMENT An Industry Consultation by the United States Energy Association August 31, 2011 Cover Photograph: CHP Plant at the Mueller Energy...

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Global Potential of Energy Efficiency Standards and Labeling Programs  

E-Print Network [OSTI]

Administration UTE (1999). UTE Uruguay Consumo de Energía387. McNeil, M. (2003). Uruguay Energy Efficiency Project -Administration UTE (1999). UTE Uruguay Consumo de Energía

McNeil, Michael A

2008-01-01T23:59:59.000Z

202

Combining Document Representations for Known-Item Search  

E-Print Network [OSTI]

This paper investigates the pre-conditions for successful combination of document representations formed from representations. There has been extensive work on studying the effectiveness of meta-search and the conditions for success [5][14][19]. Aslam and Montague [1] summarize this work by stating: "The systems being combined

Callan, Jamie

203

Mediated Enzyme Electrodes with Combined Micro-and Nanoscale Supports  

E-Print Network [OSTI]

Mediated Enzyme Electrodes with Combined Micro- and Nanoscale Supports Scott Calabrese Barton which is grown multiwall nanotubes by chemical vapor deposition combined with ohmic heating. Power systems based on ambient fuels will be feasible if the power device itself is capable

Hone, James

204

ITP Industrial Distributed Energy: Ultra Efficient Combined Heat...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Ultra Efficient Combined Heat, Hydrogen, and Power System A High-Temperature Fuel Cell to Provide On-site Process Reducing Gas, Clean Power, and Heat The project will utilize...

205

Development of Pattern Recognition Options for Combining Safeguards Subsystems  

SciTech Connect (OSTI)

This talk reviews project progress in combining process monitoring data and nuclear material accounting data to improve the over nuclear safeguards system. Focus on 2 subsystems: (1) nuclear materials accounting (NMA); and (2) process monitoring (PM).

Burr, Thomas L. [Los Alamos National Laboratory; Hamada, Michael S. [Los Alamos National Laboratory

2012-08-24T23:59:59.000Z

206

Combining Modeling Methodologies for Improved Understanding of Smart Material Characteristics  

E-Print Network [OSTI]

Combining Modeling Methodologies for Improved Understanding of Smart Material Characteristics Material Systems and Structures February 2, 1998 ABSTRACT Smart materials are complex materials performance capabilities but the synergistic response of the smart material and companion structure. Behavior

Lindner, Douglas K.

207

FUEL CELL/MICRO-TURBINE COMBINED CYCLE  

SciTech Connect (OSTI)

A wide variety of conceptual design studies have been conducted that describe ultra-high efficiency fossil power plant cycles. The most promising of these ultra-high efficiency cycles incorporate high temperature fuel cells with a gas turbine. Combining fuel cells with a gas turbine increases overall cycle efficiency while reducing per kilowatt emissions. This study has demonstrated that the unique approach taken to combining a fuel cell and gas turbine has both technical and economic merit. The approach used in this study eliminates most of the gas turbine integration problems associated with hybrid fuel cell turbine systems. By using a micro-turbine, and a non-pressurized fuel cell the total system size (kW) and complexity has been reduced substantially from those presented in other studies, while maintaining over 70% efficiency. The reduced system size can be particularly attractive in the deregulated electrical generation/distribution environment where the market may not demand multi-megawatt central stations systems. The small size also opens up the niche markets to this high efficiency, low emission electrical generation option.

Larry J. Chaney; Mike R. Tharp; Tom W. Wolf; Tim A. Fuller; Joe J. Hartvigson

1999-12-01T23:59:59.000Z

208

Combined fluidized bed retort and combustor  

DOE Patents [OSTI]

The present invention is directed to a combined fluidized bed retorting and combustion system particularly useful for extracting energy values from oil shale. The oil-shale retort and combustor are disposed side-by-side and in registry with one another through passageways in a partition therebetween. The passageways in the partition are submerged below the top of the respective fluid beds to preclude admixing or the product gases from the two chambers. The solid oil shale or bed material is transported through the chambers by inclining or slanting the fluidizing medium distributor so that the solid bed material, when fluidized, moves in the direction of the downward slope of the distributor.

Shang, Jer-Yu (Fairfax, VA); Notestein, John E. (Morgantown, WV); Mei, Joseph S. (Morgantown, WV); Zeng, Li-Wen (Morgantown, WV)

1984-01-01T23:59:59.000Z

209

GEOPHYSICAL WELL LOG/CORE DESCRIPTIONS, CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO  

SciTech Connect (OSTI)

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.

Thomas C. Chidsey Jr; David E. Eby; Laura L. Wray

2003-12-01T23:59:59.000Z

210

CROSS SECTIONS AND FIELD MAPS: CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO  

SciTech Connect (OSTI)

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.

Thomas C. Chidsey Jr; Craig D. Morgan; Kevin McClure; David E. Eby; Laura L. Wray

2003-12-01T23:59:59.000Z

211

POROSITY/PERMEABILITY CROSS-PLOTS: CHEROKEE AND BUG FIELDS, SAN JUAN COUNTY, UTAH, AND LITTLE UTE AND SLEEPING UTE FIELDS, MONTEZUMA COUNTY, COLORADO  

SciTech Connect (OSTI)

Over 400 million barrels (64 million m{sup 3}) of oil have been produced from the shallow-shelf carbonate reservoirs in the Pennsylvanian (Desmoinesian) Paradox Formation in the Paradox Basin, Utah and Colorado. With the exception of the giant Greater Aneth field, the other 100 plus oil fields in the basin typically contain 2 to 10 million barrels (0.3-1.6 million m{sup 3}) of original oil in place. Most of these fields are characterized by high initial production rates followed by a very short productive life (primary), and hence premature abandonment. Only 15 to 25 percent of the original oil in place is recoverable during primary production from conventional vertical wells. An extensive and successful horizontal drilling program has been conducted in the giant Greater Aneth field. However, to date, only two horizontal wells have been drilled in small Ismay and Desert Creek fields. The results from these wells were disappointing due to poor understanding of the carbonate facies and diagenetic fabrics that create reservoir heterogeneity. These small fields, and similar fields in the basin, are at high risk of premature abandonment. At least 200 million barrels (31.8 million m{sup 3}) of oil will be left behind in these small fields because current development practices leave compartments of the heterogeneous reservoirs undrained. Through proper geological evaluation of the reservoirs, production may be increased by 20 to 50 percent through the drilling of low-cost single or multilateral horizontal legs from existing vertical development wells. In addition, horizontal drilling from existing wells minimizes surface disturbances and costs for field development, particularly in the environmentally sensitive areas of southeastern Utah and southwestern Colorado.

Thomas C. Chidsey Jr; David E. Eby; Laura L. Wray

2003-12-01T23:59:59.000Z

212

On Walley's Combination Rule for Statistical Evidence  

E-Print Network [OSTI]

Dempster’s rule of combination is the commonly used rule for combining independent belief functions. In 1987, Peter Walley proposed an alternative rule for combining belief function representations of independent ...

Cinicioglu, Esma N.; Shenoy, Prakash P.

2006-07-01T23:59:59.000Z

213

Combined rankine and vapor compression cycles  

DOE Patents [OSTI]

An organic rankine cycle system is combined with a vapor compression cycle system with the turbine generator of the organic rankine cycle generating the power necessary to operate the motor of the refrigerant compressor. The vapor compression cycle is applied with its evaporator cooling the inlet air into a gas turbine, and the organic rankine cycle is applied to receive heat from a gas turbine exhaust to heat its boiler within one embodiment, a common condenser is used for the organic rankine cycle and the vapor compression cycle, with a common refrigerant, R-245a being circulated within both systems. In another embodiment, the turbine driven generator has a common shaft connected to the compressor to thereby eliminate the need for a separate motor to drive the compressor. In another embodiment, an organic rankine cycle system is applied to an internal combustion engine to cool the fluids thereof, and the turbo charged air is cooled first by the organic rankine cycle system and then by an air conditioner prior to passing into the intake of the engine.

Radcliff, Thomas D.; Biederman, Bruce P.; Brasz, Joost J.

2005-04-19T23:59:59.000Z

214

LHC Higgs boson mass combination  

E-Print Network [OSTI]

A measurement of the Higgs boson mass is presented based on the combined data samples of the ATLAS and CMS experiments at the CERN LHC in the $H \\rightarrow \\gamma\\gamma$ and $H \\rightarrow ZZ\\rightarrow 4\\ell$ decay channels. The results are obtained from a simultaneous fit to the reconstructed invariant mass peaks in the two channels and for the two experiments. The measured masses from the individual channels and the two experiments are found to be consistent among themselves. The combined measured mass of the Higgs boson is $m_{H} = 125.09\\pm0.21\\,\\mathrm{(stat.)}\\pm0.11\\,\\mathrm{(syst.)}~\\mathrm{GeV}$.

Adye, Tim; The ATLAS collaboration

2015-01-01T23:59:59.000Z

215

Southwestern Power Administration Combined Financial Statements, 2006-2009  

SciTech Connect (OSTI)

We have audited the accompanying combined balance sheets of the Southwestern Federal Power System (SWFPS), as of September 30, 2009, 2008, 2007, and 2006, and the related combined statements of revenues and expenses, changes in capitalization, and cash flows for the years then ended. As described in note 1(a), the combined financial statement presentation includes the hydroelectric generation functions of another Federal agency (hereinafter referred to as the generating agency), for which Southwestern Power Administration (Southwestern) markets and transmits power. These combined financial statements are the responsibility of the management of Southwestern and the generating agency. Our responsibility is to express an opinion on these combined financial statements based on our audits. We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the combined financial statements are free of material misstatement. An audit includes consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of Southwestern and the generating agency’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the combined financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall combined financial statement presentation. We believe that our audits provide a reasonable basis for our opinion. In our opinion, the combined financial statements referred to above present fairly, in all material respects, the respective financial position of the Southwestern Federal Power System, as of September 30, 2009, 2008, 2007, and 2006, and the results of its operations and its cash flow for the years then ended, in conformity with U.S. generally accepted accounting principles. Our audits were conducted for the purpose of forming an opinion on the 2009, 2008, 2007, and 2006 SWFPS’s combined financial statements taken as a whole. The supplementary information in the combining financial statements is presented for purposes of additional analysis and is not a required part of the basic combined financial statements. The supplementary information has been subjected to the auditing procedures applied in the audit of the basic combined financial statements and, in our opinion, is fairly stated in all material respects in relation to the basic combined financial statements taken as a whole.

none,

2009-09-01T23:59:59.000Z

216

Combined Waste Form Cost Trade Study  

SciTech Connect (OSTI)

A new generation of aqueous nuclear fuel reprocessing, now in development under the auspices of the DOE Office of Nuclear Energy (NE), separates fuel into several fractions, thereby partitioning the wastes into groups of common chemistry. This technology advance enables development of waste management strategies that were not conceivable with simple PUREX reprocessing. Conventional wisdom suggests minimizing high level waste (HLW) volume is desirable, but logical extrapolation of this concept suggests that at some point the cost of reducing volume further will reach a point of diminishing return and may cease to be cost-effective. This report summarizes an evaluation considering three groupings of wastes in terms of cost-benefit for the reprocessing system. Internationally, the typical waste form for HLW from the PUREX process is borosilicate glass containing waste elements as oxides. Unfortunately several fission products (primarily Mo and the noble metals Ru, Rh, Pd) have limited solubility in glass, yielding relatively low waste loading, producing more glass, and greater disposal costs. Advanced separations allow matching the waste form to waste stream chemistry, allowing the disposal system to achieve more optimum waste loading with improved performance. Metals can be segregated from oxides and each can be stabilized in forms to minimize the HLW volume for repository disposal. Thus, a more efficient waste management system making the most effective use of advanced waste forms and disposal design for each waste is enabled by advanced separations and how the waste streams are combined. This trade-study was designed to juxtapose a combined waste form baseline waste treatment scheme with two options and to evaluate the cost-benefit using available data from the conceptual design studies supported by DOE-NE.

Dirk Gombert; Steve Piet; Timothy Trickel; Joe Carter; John Vienna; Bill Ebert; Gretchen Matthern

2008-11-01T23:59:59.000Z

217

Gap and stripline combined monitor  

DOE Patents [OSTI]

A combined gap and stripline monitor device (10) for measuring the intensity and position of a charged particle beam bunch in a beam pipe of a synchotron radiation facility. The monitor has first and second beam pipe portions (11a, 11b) with an axial gap (12) therebetween. An outer pipe (14) cooperates with the first beam pipe portion (11a) to form a gap enclosure, while inner strips (23a-d) cooperate with the first beam pipe portion (11a) to form a stripline monitor, with the stripline length being the same as the gap enclosure length.

Yin, Yan (Palo Alto, CA)

1986-01-01T23:59:59.000Z

218

Gap and stripline combined monitor  

DOE Patents [OSTI]

A combined gap and stripline monitor device for measuring the intensity and position of a charged particle beam bunch in a beam pipe of a synchrotron radiation facility is disclosed. The monitor has first and second beam pipe portions with an axial gap therebetween. An outer pipe cooperates with the first beam pipe portion to form a gap enclosure, while inner strips cooperate with the first beam pipe portion to form a stripline monitor, with the stripline length being the same as the gap enclosure length. 4 figs.

Yin, Y.

1986-08-19T23:59:59.000Z

219

anterior-posterior combined approach: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

concept drives the analysis to the aimed specification part whereas the second allows Zachmann, Gabriel 12 COMA - A system for flexible combination of Schema Matching Approaches...

220

Combined Retrieval, Microphysical Retrievals and Heating Rates  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Combined Retrieval, Microphysical Retrievals and Heating Rates  

SciTech Connect (OSTI)

Microphysical retrievals and heating rates from the AMIE/Gan deployment using the PNNL Combined Retrieval.

Feng, Zhe

2013-02-22T23:59:59.000Z

222

UC Berkeley and UCSF Combined  

E-Print Network [OSTI]

Analyst John Arbolino IT Software Specialist Ross Bausone Life Sciences Specialist UCOP COE Sandy Macasieb Seshadri Sr, BearBuy System Analyst Olga Gumankova Operations Analyst Jan 2014 Susanna Chau Technology

Jacobs, Lucia

223

Image categorization combining neighborhood methods and boosting  

E-Print Network [OSTI]

We describe an efficient and scalable system for automatic image categorization. Our approach seeks to marry scalable “model-free ” neighborhood-based annotation with accurate boosting-based per-tag modeling. For accelerated neighborhood-based classification, we use a set of spatial data structures as weak classifiers for an arbitrary number of categories. We employ standard edge and color features and an approximation scheme that scales to large training sets. The weak classifier outputs are combined in a tagdependent fashion via boosting to improve accuracy. The method performs competitively with standard SVM-based per-tag classification with substantially reduced computational requirements. We present multi-label image annotation experiments using data sets of more than two million photos.

Matthew Cooper

2009-01-01T23:59:59.000Z

224

Combination drilling and skiving tool  

DOE Patents [OSTI]

A combination drilling and skiving tool including a longitudinally extending hollow skiving sleeve slidably and concentrically mounted on a right-handed twist drill. Dogs or pawls provided on the internal periphery of the skiving sleeve engage with the helical grooves of the drill. During a clockwise rotation of the tool, the drill moves downwardly and the sleeve translates upwardly, so that the drill performs a drilling operation on a workpiece. On the other hand, the drill moves upwardly and the sleeve translates downwardly, when the tool is rotated in a counter-clockwise direction, and the sleeve performs a skiving operation. The drilling and skiving operations are separate, independent and exclusive of each other.

Stone, William J. (Kansas City, MO)

1989-01-01T23:59:59.000Z

225

Combined PET/MRI scanner  

DOE Patents [OSTI]

A combined PET/MRI scanner generally includes a magnet for producing a magnetic field suitable for magnetic resonance imaging, a radiofrequency (RF) coil disposed within the magnetic field produced by the magnet and a ring tomograph disposed within the magnetic field produced by the magnet. The ring tomograph includes a scintillator layer for outputting at least one photon in response to an annihilation event, a detection array coupled to the scintillator layer for detecting the at least one photon outputted by the scintillator layer and for outputting a detection signal in response to the detected photon and a front-end electronic array coupled to the detection array for receiving the detection signal, wherein the front-end array has a preamplifier and a shaper network for conditioning the detection signal.

Schlyer, David (Bellport, NY); Woody, Craig L. (Setauket, NY); Rooney, William (Miller Place, NY); Vaska, Paul (Sound Beach, NY); Stoll, Sean (Wading River, NY); Pratte, Jean-Francois (Stony Brook, NY); O'Connor, Paul (Bellport, NY)

2007-10-23T23:59:59.000Z

226

Combining daylighting, personal controls, and load shedding offers  

E-Print Network [OSTI]

Combining daylighting, personal controls, and load shedding offers enormous potential for reducing lighting system to respond to available daylight and demand response control · Allows building occupants--Consider the improved cost-effectiveness of wireless dimming to promote daylighting controls and load- shedding

227

Coherent beam combiner for a high power laser  

DOE Patents [OSTI]

A phase conjugate laser mirror employing Brillouin-enhanced four wave mixing allows multiple independent laser apertures to be phase locked producing an array of diffraction-limited beams with no piston phase errors. The beam combiner has application in laser and optical systems requiring high average power, high pulse energy, and low beam divergence. A broad range of applications exist in laser systems for industrial processing, especially in the field of metal surface treatment and laser shot peening.

Dane, C. Brent (Livermore, CA); Hackel, Lloyd A. (Livermore, CA)

2002-01-01T23:59:59.000Z

228

Combining CSP and ObjectZ: Finite or Infinite Trace Semantics?  

E-Print Network [OSTI]

Combining CSP and Object­Z: Finite or Infinite Trace Semantics? Clemens Fischer Universit semantics as a means of com­ bining CSP with Object­Z. The purpose of this combination is to more effectively specify complex, concurrent systems: while CSP is ideal for modelling systems of concurrent

Olderog, Ernst-RĂŒdiger

229

Forecast Combination With Outlier Protection Gang Chenga,  

E-Print Network [OSTI]

Forecast Combination With Outlier Protection Gang Chenga, , Yuhong Yanga,1 a313 Ford Hall, 224 Church St SE, Minneapolis, MN 55455 Abstract Numerous forecast combination schemes with distinct on combining forecasts with minimizing the occurrence of forecast outliers in mind. An unnoticed phenomenon

Yuhong, Yang

230

Generating Resources Combined Cycle Combustion Turbine  

E-Print Network [OSTI]

11/17/2014 1 Generating Resources Combined Cycle Combustion Turbine Utility Scale Solar PV Steven doing recently around two key supply-side resource technologies 1. Combined Cycle Combustion Turbine #12;11/17/2014 4 Combined Cycle Combustion Turbine Background Primary Components Gas-fired combustion

231

MINI REVIEW Combination of aliskiren and amlodipine in hypertension  

E-Print Network [OSTI]

Hypertension frequently resists control with monotherapy, requiring two or more antihypertensive agents in combination. Many antihypertensive fixed-dose combinations (FDCs) combine drugs with different, but complementary, mechanisms of action to improve overall efficacy and tolerability. Antihypertensive FDCs may provide significant advantages over high-dose monotherapy, such as improved efficacy in blood pressure control, reduced adverse events, improved patient compliance and lower treatment costs. Optimal blockade of the reninangiotensin-aldosterone system is a key goal of pharmacotherapy in cardiovascular as well as in renal disease. As the conversion of angiotensinogen into angiotensin I is the rate-limiting step in the synthesis of angiotensin II, it has been suggested that renin inhibitors like aliskiren may have comparable or superior clinical efficacy to angiotensin converting enzyme (ACE) inhibitors and angiotensin receptor blockers (ARBs). Evidences supports that amlodipine, a calcium channel blocker is safe and effective antihypertensive agent. Various clinical trials have demonstrated the efficacy and tolerability of amlodipine in combination with ACE inhibitors and ARBs. By reviewing the clinical trials of combination of aliskiren and amlodipine in hypertensive patients, it has been found that this US FDA approved combination is effective in reducing blood pressure and having better safety profile.

Shilpa P. Jadav; Dinesh M. Parmar

232

BASIN VER DE GREAT ER ANETH BU G BAR KER DOME HOR SESH OE UTE DOME  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil and Natural8U.S.NA (BarrelsBOE Reserve

233

BASIN VER DE GREAT ER ANETH BU G BAR KER DOME HOR SESH OE UTE DOME  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil and Natural8U.S.NA (BarrelsBOE

234

BASIN VER DE GREAT ER ANETH BU G BAR KER DOME HOR SESH OE UTE DOME  

Gasoline and Diesel Fuel Update (EIA)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"Click worksheet9,1,50022,3,,,,6,1,,781Title: Telephone:shortOil and Natural8U.S.NA (BarrelsBOELiquids

235

Retrograde Melting and Internal Liquid Gettering in Silicon  

E-Print Network [OSTI]

XAS analysis. Solid metal-silicide phases below the binaryprevious reports of mixed-metal silicides in mc-Si systems,solidi?cation to solid metal silicide utes, both Cu and Fe

Hudelson, Steve

2012-01-01T23:59:59.000Z

236

Energy-efficient Housing Design. A combined approach  

SciTech Connect (OSTI)

Energy-efficient Housing Design explains how to combine passive solar, superinsulation, and earth-shelter techniques to create the most energy-efficient, cost-effective housing designs. It addresses the concerns of architects, planners, contractors, developers, and homeowners, providing layouts for suburban tract housing and construction plans and details, as well as cost and performance analyses. Contents: Current approaches to Energy-efficient Design. Superinsulation Methods. Combining Approaches. Design Characteristics with the Combined Approach. Materials and Construction Methods. Wall and Roof Design. Windows and Window Protection. Passive Solar Storage Methods. Winter Heating Performance. The Passive Solar Storage System. Designing for Summer Cooling. Analyzing Cost-effectiveness. Construction Cost with Energy-efficient Design. The Balance Sheet. Site Planning. Landscaping the Lot. Subdivision-planning Methods. Streetscape and Landscape. Appendices.

Lane, J.

1985-01-01T23:59:59.000Z

237

Recent Results of the ATLAS Barrel Combined Test Beam  

SciTech Connect (OSTI)

In summer 2004 a full slice of the ATLAS detector -- including all detector subsystems from the inner tracker, the calorimetry to the muon system -- was exposed to particle beams (electrons, pions, photons, muons, protons) with different energies (from 1 GeV to 350 GeV). The aim was to study the combined performance of the different detector subsystems in ATLAS-like conditions.We present the electronics calibration scheme of the electromagnetic calorimeter (EMC) and its complete implementation. The calibrated response of the EMC is compared to the Monte Carlo simulations, showing that a very good description of the data has been achieved. Results of the combined data analysis are presented, focusing on the combined reconstruction of converted photons using the EMC and the ATLAS inner tracker.

Delmastro, Marco [CERN, Geneva (Switzerland); Universita degli Studi, Milan (Italy); INFN, Milan (Italy)

2006-10-27T23:59:59.000Z

238

RESEARCH PAPER Modelling the Human Immune System by Combining  

E-Print Network [OSTI]

Approaches Nicolas Rapin & Can Kesmir & Sune Frankild & Morten Nielsen & Claus Lundegaard & SĂžren Brunak

Utrecht, Universiteit

239

Ultra Efficient Combined Heat, Hydrogen, and Power System  

Broader source: Energy.gov [DOE]

In order for metal products to have desired properties, most metal is thermally processed at a high temperature one or more times under a controlled atmosphere. There are many different thermal...

240

Understanding Emissions from Combined Heat and Power Systems  

E-Print Network [OSTI]

and regulated air pollutants such as nitrogen oxides, sulfur dioxide (S02), and particulates. Compared with NO x emission rates of between approximately 0.5 and 2.2 Ibs/MWh e for non diesel, small, DG technologies, CHP can emit less than 0.1 Ibs/MWh". CO... FRANCISCO, CA WASHINGTON, nc. 34%?? ? --------------------, 32%, ~30'l." ~8% ... w E .g6r. f 4 '''' " . 22'" 20% 18'" ---+----~-_-----_+__--___1 1940 1950 1960 1970 1980 1990 2000 Figure 1. Efficiency of Electricity Generation in the United...

Shipley, A. M.; Greene, N.; Carter, S.; Elliott, R. N.

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

A novel nanodelivery system for combination tumor therapy  

E-Print Network [OSTI]

Anti-angiogenic therapy offers many benefits over traditional cytotoxic chemotherapy including fewer toxic side effects and the reduced development of drug resistance. Anti-angiogenics alone have not proven effective in ...

Eavarone, David A. (David Alan)

2004-01-01T23:59:59.000Z

242

Combined fuel and air staged power generation system  

SciTech Connect (OSTI)

A method and apparatus for generation of electric power employing fuel and air staging in which a first stage gas turbine and a second stage partial oxidation gas turbine power operated in parallel. A first portion of fuel and oxidant are provided to the first stage gas turbine which generates a first portion of electric power and a hot oxidant. A second portion of fuel and oxidant are provided to the second stage partial oxidation gas turbine which generates a second portion of electric power and a hot syngas. The hot oxidant and the hot syngas are provided to a bottoming cycle employing a fuel-fired boiler by which a third portion of electric power is generated.

Rabovitser, Iosif K; Pratapas, John M; Boulanov, Dmitri

2014-05-27T23:59:59.000Z

243

Combined Heat and Power (CHP) Systems | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

building, merchant stores, light industrial, supermarkets, restaurants, hospitality, health care and high-tech industries. In high-tech industries such as telecommunications,...

244

MHK Technologies/OMI Combined Energy System | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE <AirWECHelixInformationPowerOCGenOMI

245

Ultra Efficient Combined Heat, Hydrogen, and Power System - Presentation by  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up from theDepartment of Dept. ofUSA RS Basic Contract -Biofuels forUSPS:

246

Ultra Efficient Combined Heat, Hydrogen, and Power System  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Career Scientists' Research Petroleum ReserveDepartment of EnergyDepartment ofRemarksNuclear

247

Ultra Efficient Combined Heat, Hydrogen, and Power System - Fact Sheet,  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: AlternativeEnvironment,Institutes and1TeleworkAgriculture U.S.-China CleanDepartment

248

Combined Electric Machine and Current Source Inverter Drive System - Energy  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed New SubstationClean Communities ofCellulosic(SNfactory) |InnovationA P P E

249

Ultra Efficient Combined Heat, Hydrogen, and Power System  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of EnergyTheTwo New EnergyofDEVELOPMENT ORGANIZATIONS |Ultra Efficient

250

Selection method for combined pump operation in pipe network systems  

E-Print Network [OSTI]

values. This is illustrated in Figure 4. NPSH TH FEET FEE 188 168 148 T 0IR. ? In. 58 CAPACITY M~/HR 188 158 288 TH NPSH METERS METERS 3LII-12 Impeller K 128 188 18 72 4e 1780 IIPM 48 48 38 28 8HP 5H 25 le 12 18 NP5 R 8 288 488...

Lopez, Francisco Xavier

1990-01-01T23:59:59.000Z

251

Midwest Region Combined Heat and Power Projects  

Broader source: Energy.gov [DOE]

DOE's CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs. 

252

Northwest Region Combined Heat and Power Projects  

Broader source: Energy.gov [DOE]

DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

253

Pacific Region Combined Heat and Power Projects  

Broader source: Energy.gov [DOE]

DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

254

Northeast Region Combined Heat and Power Projects  

Broader source: Energy.gov [DOE]

DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

255

Combining Feedback Absorption Spectroscopy, Amplified Resonance...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

On-Board Measurement of Ammonia and Nitrous Oxide Using Feedback Absorption Laser Spectroscopy Combined with Amplified Resonance and Low Pressure Sampling Cummins...

256

The Center for Control, Dynamical Systems, and Computation University of California at Santa Barbara  

E-Print Network [OSTI]

Barbara Fall 2009 Seminar Series Presents Ruminations on High Performance Computing Bruce Hendrickson:00 PM HFH 1104 Abstract: After fifteen years of stasis, high performance computing is entering an era- lenges, high performance computing will be enriched and rejuvenated, and will contrib- ute

Akhmedov, Azer

257

Air-blown Integrated Gasification Combined Cycle demonstration project  

SciTech Connect (OSTI)

Clean Power Cogeneration, Inc. (CPC) has requested financial assistance from DOE for the design construction, and operation of a normal 1270 ton-per-day (120-MWe), air-blown integrated gasification combined-cycle (IGCC) demonstration plant. The demonstration plant would produce both power for the utility grid and steam for a nearby industrial user. The objective of the proposed project is to demonstrate air-blown, fixed-bed Integrated Gasification Combined Cycle (IGCC) technology. The integrated performance to be demonstrated will involve all the subsystems in the air-blown IGCC system to include coal feeding; a pressurized air-blown, fixed-bed gasifier capable of utilizing caking coal; a hot gas conditioning systems for removing sulfur compounds, particulates, and other contaminants as necessary to meet environmental and combustion turbine fuel requirements; a conventional combustion turbine appropriately modified to utilize low-Btu coal gas as fuel; a briquetting system for improved coal feed performance; the heat recovery steam generation system appropriately modified to accept a NO{sub x} reduction system such as the selective catalytic reduction process; the steam cycle; the IGCC control systems; and the balance of plant. The base feed stock for the project is an Illinois Basin bituminous high-sulfur coal, which is a moderately caking coal. 5 figs., 1 tab.

Not Available

1991-01-01T23:59:59.000Z

258

Hydrogen purification system  

DOE Patents [OSTI]

The present invention provides a system to purify hydrogen involving the use of a hydride compressor and catalytic converters combined with a process controller.

Golben, Peter Mark

2010-06-15T23:59:59.000Z

259

Integrated gasification combined-cycle research development and demonstration activities  

SciTech Connect (OSTI)

The United States Department of Energy (DOE) has selected six integrated gasification combined-cycle (IGCC) advanced power systems for demonstration in the Clean Coal Technology (CCT) Program. DOE`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D) program that supports the CCT program, and addresses long-term improvements in support of IGCC technology. This overview briefly describes the CCT projects and the supporting RD&D activities.

Ness, H.M.; Reuther, R.B.

1995-12-01T23:59:59.000Z

260

Combined Heat & Power Technology Overview and Federal Sector...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat & Power Technology Overview and Federal Sector Deployment Combined Heat & Power Technology Overview and Federal Sector Deployment Presentation covers the Combined...

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER | Department...  

Broader source: Energy.gov (indexed) [DOE]

ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER ENVIRONMENTAL REVENUE STREAMS FOR COMBINED HEAT AND POWER...

262

Encouraging Combined Heat and Power in California Buildings  

E-Print Network [OSTI]

Memorandum Encouraging Combined Heat and Power in California2012 ICF, 2012, “Combined Heat and Power: Policy AnalysisA New Generation of Combined Heat and Power: Policy Planning

Stadler, Michael

2014-01-01T23:59:59.000Z

263

Extended write combining using a write continuation hint flag  

DOE Patents [OSTI]

A computing apparatus for reducing the amount of processing in a network computing system which includes a network system device of a receiving node for receiving electronic messages comprising data. The electronic messages are transmitted from a sending node. The network system device determines when more data of a specific electronic message is being transmitted. A memory device stores the electronic message data and communicating with the network system device. A memory subsystem communicates with the memory device. The memory subsystem stores a portion of the electronic message when more data of the specific message will be received, and the buffer combines the portion with later received data and moves the data to the memory device for accessible storage.

Chen, Dong; Gara, Alan; Heidelberger, Philip; Ohmacht, Martin; Vranas, Pavlos

2013-06-04T23:59:59.000Z

264

Policy Strategies and Paths to promote Sustainable Energy Systems - The dynamic Invert Simulation Tool  

E-Print Network [OSTI]

solar thermal systems (30% for DHW systems; 40% for combined systems space heating and DHW). • Soft loans

Stadler, Michael; Kranzl, Lukas; Huber, Claus; Haas, Reinhard; Tsioliaridou, Elena

2006-01-01T23:59:59.000Z

265

Projection and Reaction for Decision Support in Refineries: Combining Multiple Theories  

E-Print Network [OSTI]

Projection and Reaction for Decision Support in Refineries: Combining Multiple Theories Kurt D system to provide decision support for refinery operations personnel (Krebsbach & Musliner 1997; Musliner to provide sufficiently flexible decision support in complex environments. Background: Refinery Control

Krebsbach, Kurt D.

266

Combining a Renewable Portfolio Standard with a Cap-and-Trade Policy: A General Equilibrium Analysis  

E-Print Network [OSTI]

Many efforts to address greenhouse gas emissions combine a cap-and-trade system with other measures such as a renewable portfolio standard. In this paper we use a computable general equilibrium (CGE) model, the MIT Emissions ...

Morris, Jennifer

267

Combining a renewable portfolio standard with a cap-and-trade policy : a general equilibrium analysis  

E-Print Network [OSTI]

Most economists see incentive-based measures such a cap-and-trade system or a carbon tax as cost effective policy instruments for limiting greenhouse gas emissions. In actuality, many efforts to address GHG emissions combine ...

Morris Jennifer F. (Jennifer Faye)

2009-01-01T23:59:59.000Z

268

Combined Total Amount of Oil and Gas Recovered Daily from the...  

Broader source: Energy.gov (indexed) [DOE]

ODS format Combined Total Amount of Oil and Gas Recovered Daily from the Top Hat and Choke Line oil recovery systems - ODS format Updated through 12:00 AM on July 16, 2010....

269

Combined Total Amount of Oil and Gas Recovered Daily from the...  

Broader source: Energy.gov (indexed) [DOE]

XLS Combined Total Amount of Oil and Gas Recovered Daily from the Top Hat and Choke Line oil recovery systems - XLS Updated through 12:00 AM on July 16, 2010. 52Item84Recovery...

270

Private Key Recovery Combination Attacks: On Extreme Fragility of Popular Bitcoin  

E-Print Network [OSTI]

Private Key Recovery Combination Attacks: On Extreme Fragility of Popular Bitcoin Key Management and practical operational security in bitcoin digital currency storage systems. We study the security two most used bitcoin HD Wallet key management solutions (e.g. in BIP032 and in earlier systems). These systems

271

Master Thesis Combined Neural Networks and  

E-Print Network [OSTI]

in steel design Joo, Min Sung ( ) Department of Ferrous Technology (Computational Metallurgy) Graduate of Ferrous Technology (Computational Metallurgy) Graduate Institute of Ferrous Technology Pohang University of Ferrous Technology (Computational Metallurgy) Pohang, Korea June 23th , 2008 Approved by #12;Combined

Cambridge, University of

272

The Econometrics of Data Combination Geert Ridder  

E-Print Network [OSTI]

The Econometrics of Data Combination Geert Ridder Department of Economics, University of Southern University,Baltimore E-mail: moffitt@jhu.edu Chapter for the Handbook of Econometrics April 1, 2005 We thank

Weaver, Harold A. "Hal"

273

Harmonic Representation of Combinations and Partitions  

E-Print Network [OSTI]

In the present article a new method of deriving integral representations of combinations and partitions in terms of harmonic products has been established. This method may be relevant to statistical mechanics and to number theory.

Michalis Psimopoulos

2011-03-01T23:59:59.000Z

274

Combined Heat and Power | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataCombined Heat & Power Deployment »Technical Assistance » Combined

275

Nuclear Power 2010 Program: Combined Construction and Operating...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Power 2010 Program: Combined Construction and Operating License & Design Certification Demonstration Projects Lessons Learned Report Nuclear Power 2010 Program: Combined...

276

Crowd-powered systems  

E-Print Network [OSTI]

Crowd-powered systems combine computation with human intelligence, drawn from large groups of people connecting and coordinating online. These hybrid systems enable applications and experiences that neither crowds nor ...

Bernstein, Michael Scott

2012-01-01T23:59:59.000Z

277

Combined SO sub 2 /NO sub x reduction technology  

SciTech Connect (OSTI)

Enactment of the Clean Air Act Amendments and passage of state legislation leading to more stringent nitrogen oxides (NO{sub x}) regulations have fueled research and development efforts on technologies for the combined control of sulfur dioxide (SO{sub 2}) and NO{sub x}. The integrated removal of both SO{sub 2} and NO{sub x}, in a single system can offer significant advantages over the use of several separate processes, including such factors as reduced system complexity, better operability, and lower costs. This paper reviews the status of a number of integrated flue-gas-cleanup (FGC) systems that have reached a significant stage of development, focusing on post-combustion processes that have been tested or are ready for testing at the pilot scale or larger. A brief process description, a summary of the development status and performance achieved to date, pending commercialization issues, and process economics (when available) are given for each technology.

Livengood, C.D.; Huang, H.S. (Argonne National Lab., IL (United States)); Markussen, J.M. (USDOE Pittsburgh Energy Technology Center, PA (United States))

1992-01-01T23:59:59.000Z

278

Combined microstructure x-ray optics  

SciTech Connect (OSTI)

Multilayers are man-made microstructures which vary in depth and are now of sufficient quality to be used as x-ray, soft x-ray and extreme ultraviolet optics. Gratings are man-made in plane microstructures which have been used as optic elements for most of this century. Joining of these two optical microstructures to form combined microstructure optical microstructures to form combined microstructure optical elements has the potential for greatly enhancing both the throughput and the resolution attainable in these spectral ranges. The characteristics of these new optic elements will be presented and compared to experiment with emphasis on the unique properties of these combined microstructures. These results reported are general in nature and not limited to the soft x-ray or extreme ultraviolet spectral domains and also apply to neutrons. 19 refs., 7 figs., 4 tabs.

Barbee, T.W. Jr.

1989-02-01T23:59:59.000Z

279

Online Forecast Combination for Dependent Heterogeneous Data  

E-Print Network [OSTI]

the single individual forecasts. Several studies have shown that combining forecasts can be a useful hedge against structural breaks, and forecast combinations are often more stable than single forecasts (e.g. Hendry and Clements, 2004, Stock and Watson, 2004... in expectations. Hence, we have the following. Corollary 4 Suppose maxt?T kl (Yt, hwt,Xti)kr ? A taking expectation on the left hand side, adding 2A ? T and setting ? = 0 in mT (?), i.e. TX t=1 E [lt (wt)? lt (ut...

Sancetta, Alessio

280

Prism : an answer projection system  

E-Print Network [OSTI]

Prism is an answer projection system that combines the best attributes of traditional and Web-based question answering systems. Traditional question answering systems retrieve answers with pinpoint accuracy but limited ...

Wu, Lynn, 1981-

2003-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Combined Opportunities in Energy & Water Conservation Projects  

E-Print Network [OSTI]

, and East Bay Municipal Utility District. Figure 2: Minimum Cost of Energy Savings vs. Percent Daily Savings measures of cost-effectiveness. In order to do this, we: ~ Determined total potential residential energyCombined Opportunities in Energy & Water Conservation Projects A.Keller, S. Hughes, S. Bennett, M

Keller, Arturo A.

282

ccsd00003923, Combination of carbon nanotubes and  

E-Print Network [OSTI]

of composite optical limiters, in which two complementary nonlinear optical materials are mixed togetherccsd­00003923, version 1 ­ 18 Jan 2005 Combination of carbon nanotubes and two-photon absorbers-linear scattering from single-wall carbon nanotubes (SWNT) and multiphoton absorption (MPA) from organic

283

March 29, 2012 Combining climate and energy  

E-Print Network [OSTI]

: Renewable energy, energy efficiency, energy policy, climate policy, policy interaction. JEL Classification sector including the policy instruments of the CEP: a price on CO2 emissions, a renewable energy subsidyMarch 29, 2012 Combining climate and energy policies: synergies or antagonisms? Oskar Lecuyer

Paris-Sud XI, Université de

284

Combined Heat and Power Plant Steam Turbine  

E-Print Network [OSTI]

Combined Heat and Power Plant Steam Turbine Steam Turbine Chiller Campus Heat Load Steam (recovered waste heat) Gas Turbine University Substation High Pressure Natural Gas Campus Electric Load Southern Generator Heat Recovery Alternative Uses: 1. Campus heating load 2. Steam turbine chiller to campus cooling

Rose, Michael R.

285

TOPIC INTRODUCTION Title page Combining Ca2+  

E-Print Network [OSTI]

1 TOPIC INTRODUCTION Title page Combining Ca2+ Imaging with Other Optical Techniques SHORT TITLE: Ca2+ Imaging and Other Optical Techniques Marco Canepari 1,2 , Dejan Zecevic 4 , Kaspar E Vogt 3 Descartes, 75006 Paris, France Address correspondence to: marco.canepari@ujf-grenoble.fr ABSTRACT Ca2

Paris-Sud XI, Université de

286

Chasing megawatts in combined cycle plants  

SciTech Connect (OSTI)

Combined cycle owners do not have to accept that combined cycle performance must degrade over time. Through low cost testing using existing instrumentation, a method is presented to identify causes for lost generation. A 500 MW combined cycle plant, with two STAG 207EA units, had lost 17 MW since initial operation, and found that: Gas side fouling on A four HRSG`s accounted for 8 MW of the total loss LP steam turbine efficiency was below design on one unit, contributing 3 MW Condenser air removal was poor on both units, a loss of an additional 2 MW Compressor and turbine section efficiency losses on 2 of 4 GT`s cost over 4 MW The test also revealed that the other two GT`s, both cooling towers, and one of the two steam turbines, were performing at or near design. Thus far 3 MW has been recovered, with planning underway for recovery of another 3 MW. The remaining 11 MW, though not immediately recoverable, will be the focus of planning for the next major outage. This simple method can be used at any combined cycle using existing instrumentation, with minimal intrusion on daily operations. The use of redundant measurements and uncertainty analysis assures valid and useful results.

Koch, J. [Power Plant Performance Specialist, Lansdowne, PA (United States); DeGeeter, S. [Ocean State Power, Harrisville, RI (United States); Haynes, C.J. [New England Power Co., Somerset, MA (United States)

1996-05-01T23:59:59.000Z

287

Object Detection Combining Recognition and Segmentation  

E-Print Network [OSTI]

segmentation. There are two main steps in this method: a hypothesis generation step and a verification step. In the top-down hy- pothesis generation step, we design an improved Shape Context feature, which is more. We develop an object detection method combining top-down recog- nition with bottom-up image

Plotkin, Joshua B.

288

Combined cycle power plant incorporating coal gasification  

DOE Patents [OSTI]

A combined cycle power plant incorporating a coal gasifier as the energy source. The gases leaving the coal gasifier pass through a liquid couplant heat exchanger before being used to drive a gas turbine. The exhaust gases of the gas turbine are used to generate both high pressure and low pressure steam for driving a steam turbine, before being exhausted to the atmosphere.

Liljedahl, Gregory N. (Tariffville, CT); Moffat, Bruce K. (Simsbury, CT)

1981-01-01T23:59:59.000Z

289

A verification framework for hybrid systems  

E-Print Network [OSTI]

Combining; discrete state transitions with differential equations, Hybrid system models provide an expressive formalism for describing software systems that interact with a physical environment. Automatically checking ...

Mitra, Sayan

2007-01-01T23:59:59.000Z

290

Combining Retiming and Recycling to Optimize the Performance of Synchronous Circuits  

E-Print Network [OSTI]

Combining Retiming and Recycling to Optimize the Performance of Synchronous Circuits Luca P, CA 94720-1772 Abstract Recycling was recently proposed as a system-level design tech- nique to facilitate the building of complex System-on-Chips (SOC) by assembling pre-designed components. Recycling

Carloni, Luca

291

Combining Resummed Higgs Predictions Across Jet Bins  

E-Print Network [OSTI]

Experimental analyses often use jet binning to distinguish between different kinematic regimes and separate contributions from background processes. To accurately model theoretical uncertainties in these measurements, a consistent description of the jet bins is required. We present a complete framework for the combination of resummed results for production processes in different exclusive jet bins, focusing on Higgs production in gluon fusion as an example. We extend the resummation of the Higgs + 1-jet cross section into the challenging low transverse momentum region, lowering the uncertainties considerably. We provide combined predictions with resummation for cross sections in the Higgs + 0-jet and Higgs + 1-jet bins, and give an improved theory covariance matrix for use in experimental studies. We estimate that the relevant theoretical uncertainties on the signal strength in the Higgs to WW analysis are reduced by nearly a factor of 2 compared to the current value.

Radja Boughezal; Xiaohui Liu; Frank Petriello; Frank J. Tackmann; Jonathan R. Walsh

2013-12-16T23:59:59.000Z

292

Laboratory Shuttle Bus Routes: Combined Routes  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickrinformationPostdocs space Combined Routes & Schedules Blue Route

293

ITP Industrial Distributed Energy: Combined Heat and Power -...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

ITP Industrial Distributed Energy: Combined Heat and Power - A Decade of Progress, A Vision for the Future ITP Industrial Distributed Energy: Combined Heat and Power - A Decade of...

294

Promoting Combined Heat and Power (CHP) for Multifamily Properties...  

Broader source: Energy.gov (indexed) [DOE]

Promoting Combined Heat and Power (CHP) for Multifamily Properties, 2008 Promoting Combined Heat and Power (CHP) for Multifamily Properties, 2008 The U.S. Department of Housing and...

295

Combined Heat and Power (CHP) Resource Guide for Hospital Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combined Heat and Power (CHP) Resource Guide for Hospital Applications, 2007 Combined Heat and Power (CHP) Resource Guide for Hospital Applications, 2007 The objective of this 2007...

296

Energy Portfolio Standards and the Promotion of Combined Heat...  

Broader source: Energy.gov (indexed) [DOE]

Portfolio Standards and the Promotion of Combined Heat and Power (CHP) White Paper, April 2009 Energy Portfolio Standards and the Promotion of Combined Heat and Power (CHP) White...

297

Guide to Using Combined Heat and Power for Enhancing Reliability...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Guide to Using Combined Heat and Power for Enhancing Reliability and Resiliency in Buildings Guide to Using Combined Heat and Power for Enhancing Reliability and Resiliency in...

298

Combined Heat and Power: Expanding CHP in Your State | Department...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power: Expanding CHP in Your State Combined Heat and Power: Expanding CHP in Your State This presentation, given through the DOE's Technical Assitance Program...

299

National CHP Roadmap: Doubling Combined Heat and Power Capacity...  

Broader source: Energy.gov (indexed) [DOE]

National CHP Roadmap: Doubling Combined Heat and Power Capacity in the United States by 2010, March 2001 National CHP Roadmap: Doubling Combined Heat and Power Capacity in the...

300

Combined Heat and Power, Waste Heat, and District Energy | Department...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power, Waste Heat, and District Energy Combined Heat and Power, Waste Heat, and District Energy Presentation-given at the Fall 2011 Federal Utility Partnership...

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Energy Department Actions to Deploy Combined Heat and Power,...  

Broader source: Energy.gov (indexed) [DOE]

Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency Energy Department Actions to Deploy Combined Heat and Power, Boost Industrial Efficiency October 21, 2013 -...

302

Combined Heat and Power Market Potential for Opportunity Fuels...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Combined Heat and Power Market Potential for Opportunity Fuels, August 2004 Combined Heat and Power Market Potential for Opportunity Fuels, August 2004 The purpose of this 2004...

303

Assessment of Combined Heat and Power Premium Power Applications...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Assessment of Combined Heat and Power Premium Power Applications in California, September 2008 Assessment of Combined Heat and Power Premium Power Applications in California,...

304

National Association of Counties Webinar - Combined Heat and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Association of Counties Webinar - Combined Heat and Power: Resiliency Strategies for Critical Facilities National Association of Counties Webinar - Combined Heat and Power:...

305

Combined Heat and Power (CHP) Integrated with Burners for Packaged...  

Broader source: Energy.gov (indexed) [DOE]

Combined Heat and Power (CHP) Integrated with Burners for Packaged Boilers Combined Heat and Power (CHP) Integrated with Burners for Packaged Boilers Providing Clean, Low-Cost,...

306

Engine Driven Combined Heat and Power: Arrow Linen Supply, December...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Engine Driven Combined Heat and Power: Arrow Linen Supply, December 2008 Engine Driven Combined Heat and Power: Arrow Linen Supply, December 2008 This paper describes the Arrow...

307

Demonstration of Combined Zero-Valent Iron and Electrical Resistance...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Demonstration of Combined Zero-Valent Iron and Electrical Resistance Heating for In Situ Trichloroethene Remediation. Demonstration of Combined Zero-Valent Iron and Electrical...

308

Comparative Toxicity of Combined Particle and Semi-Volatile Organic...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Toxicity of Combined Particle and Semi-Volatile Organic Fractioins of Gasoline and Diesel Emissions Comparative Toxicity of Combined Particle and Semi-Volatile Organic Fractioins...

309

Elucidating graphene - Ionic Liquid interfacial region: a combined...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

graphene - Ionic Liquid interfacial region: a combined experimental and computational study. Elucidating graphene - Ionic Liquid interfacial region: a combined experimental and...

310

anesthetics combined: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Encouraging Combined Heat andgrid to assess the CO 2 mitigate potential of CHP and CCHP and other DER Collected Data Memorandum Encouraging Combined Heat and Stadler, Michael...

311

abdominal hyperthermia combined: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Encouraging Combined Heat andgrid to assess the CO 2 mitigate potential of CHP and CCHP and other DER Collected Data Memorandum Encouraging Combined Heat and Stadler, Michael...

312

anthracycline-based combination chemotherapy: Topics by E-print...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Encouraging Combined Heat andgrid to assess the CO 2 mitigate potential of CHP and CCHP and other DER Collected Data Memorandum Encouraging Combined Heat and Stadler, Michael...

313

Combined-cycle gas and steam turbine power plants. 2. edition  

SciTech Connect (OSTI)

First published in 1991, this book is the leading reference on technical and economic factors of combined-cycle applications now leading the trend toward merchant plants and the peaking power needed in newly deregulated markets around the world, this long-awaited second edition is more important than ever. In it, Kehlhofer -- an internationally recognized authority in the field of new combined-cycle power plants -- and his co-authors widen the scope and detail found in the first edition. Included are tips on system layout, details on controls and automation, and operating instructions. Loaded with case studies, reference tables, and more than 150 figures, this text offers solid advice on system layout, controls and automation, and operating and maintenance instructions. The author provides real-world examples to apply to one`s own applications. The contents include: Introduction; The electricity market; Thermodynamic principles of combined-cycle plants; Combined-cycle concepts; Applications of combined-cycle; Components; Control and automation; Operating and part load behavior; Environmental considerations; Developmental trends; Typical combined-cycle plants already built; Conclusion; Appendices; Conversions; Calculation of the operating performance of combined-cycle installations; Definitions of terms and symbols; Bibliography; and Index.

Kehlhofer, R.; Bachmann, R.; Nielson, H.; Warner, J.

1999-01-01T23:59:59.000Z

314

Combination & Integration of DPF-SCR Aftertreatment  

Broader source: Energy.gov (indexed) [DOE]

for HDD to provide a pathway to the next generation of emissions control systems CRADA with PACCAR, working closely with DAF Trucks Highly evolving field of work (mostly...

315

Model Predictive Control of Integrated Gasification Combined Cycle Power Plants  

SciTech Connect (OSTI)

The primary project objectives were to understand how the process design of an integrated gasification combined cycle (IGCC) power plant affects the dynamic operability and controllability of the process. Steady-state and dynamic simulation models were developed to predict the process behavior during typical transients that occur in plant operation. Advanced control strategies were developed to improve the ability of the process to follow changes in the power load demand, and to improve performance during transitions between power levels. Another objective of the proposed work was to educate graduate and undergraduate students in the application of process systems and control to coal technology. Educational materials were developed for use in engineering courses to further broaden this exposure to many students. ASPENTECH software was used to perform steady-state and dynamic simulations of an IGCC power plant. Linear systems analysis techniques were used to assess the steady-state and dynamic operability of the power plant under various plant operating conditions. Model predictive control (MPC) strategies were developed to improve the dynamic operation of the power plants. MATLAB and SIMULINK software were used for systems analysis and control system design, and the SIMULINK functionality in ASPEN DYNAMICS was used to test the control strategies on the simulated process. Project funds were used to support a Ph.D. student to receive education and training in coal technology and the application of modeling and simulation techniques.

B. Wayne Bequette; Priyadarshi Mahapatra

2010-08-31T23:59:59.000Z

316

A Bayesian Framework for Combining Valuation Estimates  

E-Print Network [OSTI]

Obtaining more accurate equity value estimates is the starting point for stock selection, value-based indexing in a noisy market, and beating benchmark indices through tactical style rotation. Unfortunately, discounted cash flow, method of comparables, and fundamental analysis typically yield discrepant valuation estimates. Moreover, the valuation estimates typically disagree with market price. Can one form a superior valuation estimate by averaging over the individual estimates, including market price? This article suggests a Bayesian framework for combining two or more estimates into a superior valuation estimate. The framework justifies the common practice of averaging over several estimates to arrive at a final point estimate.

Kenton K. Yee

2007-07-24T23:59:59.000Z

317

A Bayesian Framework for Combining Valuation Estimates  

E-Print Network [OSTI]

Obtaining more accurate equity value estimates is the starting point for stock selection, value-based indexing in a noisy market, and beating benchmark indices through tactical style rotation. Unfortunately, discounted cash flow, method of comparables, and fundamental analysis typically yield discrepant valuation estimates. Moreover, the valuation estimates typically disagree with market price. Can one form a superior valuation estimate by averaging over the individual estimates, including market price? This article suggests a Bayesian framework for combining two or more estimates into a superior valuation estimate. The framework justifies the common practice of averaging over several estimates to arrive at a final point estimate.

Yee, Kenton K

2007-01-01T23:59:59.000Z

318

Combination free electron and gaseous laser  

DOE Patents [OSTI]

A multiple laser having one or more gaseous laser stages and one or more free electron stages. Each of the free electron laser stages is sequentially pumped by a microwave linear accelerator. Subsequently, the electron beam is directed through a gaseous laser, in the preferred embodiment, and in an alternative embodiment, through a microwave accelerator to lower the energy level of the electron beam to pump one or more gaseous lasers. The combination laser provides high pulse repetition frequencies, on the order of 1 kHz or greater, high power capability, high efficiency, and tunability in the synchronous production of multiple beams of coherent optical radiation.

Brau, Charles A. (Los Alamos, NM); Rockwood, Stephen D. (Los Alamos, NM); Stein, William E. (Los Alamos, NM)

1980-01-01T23:59:59.000Z

319

combined heat power | netl.doe.gov  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear SecurityTensile Strain Switched5 Industrial Carbon Capture and Storage CleanDiscovery ofDevelopment of theCombined

320

Modeling the heating of the Green Energy Lab in Shanghai by the geothermal heat pump combined with the solar thermal energy and ground energy storage.  

E-Print Network [OSTI]

?? This work involves the study of heating systems that combine solar collectors, geothermal heat pumps and thermal energy storage in the ground. Solar collectors… (more)

Yu, Candice Yau May

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Compatibility of Stand Basal Area Predictions Based on Forecast Combination  

E-Print Network [OSTI]

Compatibility of Stand Basal Area Predictions Based on Forecast Combination Xiongqing Zhang Carr.) in Beijing, forecast combination was used to adjust predicted stand basal areas from these three types of models. The forecast combination method combines information and disperses errors from

Cao, Quang V.

322

Thermal Energy Corporation Combined Heat and Power Project  

SciTech Connect (OSTI)

To meet the planned heating and cooling load growth at the Texas Medical Center (TMC), Thermal Energy Corporation (TECO) implemented Phase 1 of a Master Plan to install an additional 32,000 tons of chilled water capacity, a 75,000 ton-hour (8.8 million gallon) Thermal Energy Storage (TES) tank, and a 48 MW Combined Heat and Power (CHP) system. The Department of Energy selected TMC for a $10 million grant award as part of the Financial Assistance Funding Opportunity Announcement, U.S. Department of Energy National Energy Technology, Recovery Act: Deployment of Combined Heat and Power (CHP) Systems, District Energy Systems, Waste Energy Recovery Systems, and Efficiency Industrial Equipment Funding Opportunity Number: DE-FOA-0000044 to support the installation of a new 48 MW CHP system at the TMC located just outside downtown Houston. As the largest medical center in the world, TMC is home to many of the nationâ??s best hospitals, physicians, researchers, educational institutions, and health care providers. TMC provides care to approximately six million patients each year, and medical instruction to over 71,000 students. A medical center the size of TMC has enormous electricity and thermal energy demands to help it carry out its mission. Reliable, high-quality steam and chilled water are of utmost importance to the operations of its many facilities. For example, advanced medical equipment, laboratories, laundry facilities, space heating and cooling all rely on the generation of heat and power. As result of this project TECO provides this mission critical heating and cooling to TMC utilizing a system that is both energy-efficient and reliable since it provides the capability to run on power independent of the already strained regional electric grid. This allows the medical center to focus on its primary mission â?? providing top quality medical care and instruction â?? without worrying about excessive energy costs or the loss of heating and cooling due to the risk of power outages. TECOâ??s operation is the largest Chilled Water District Energy System in the United States. The company used DOEâ??s funding to help install a new high efficiency CHP system consisting of a Combustion Turbine and a Heat Recovery Steam Generator. This CHP installation was just part of a larger project undertaken by TECO to ensure that it can continue to meet TMCâ??s growing needs. The complete efficiency overhaul that TECO undertook supported more than 1,000 direct and indirect jobs in manufacturing, engineering, and construction, with approximately 400 of those being jobs directly associated with construction of the combined heat and power plant. This showcase industrial scale CHP project, serving a critical component of the nationâ??s healthcare infrastructure, directly and immediately supported the energy efficiency and job creation goals established by ARRA and DOE. It also provided an unsurpassed model of a district energy CHP application that can be replicated within other energy intensive applications in the industrial, institutional and commercial sectors.

E. Bruce Turner; Tim Brown; Ed Mardiat

2011-12-31T23:59:59.000Z

323

Combined experiment Phase 2 data characterization  

SciTech Connect (OSTI)

The National Renewable Energy Laboratory`s ``Combined Experiment`` has yielded a large quantity of experimental data on the operation of a downwind horizontal axis wind turbine under field conditions. To fully utilize this valuable resource and identify particular episodes of interest, a number of databases were created that characterize individual data events and rotational cycles over a wide range of parameters. Each of the 59 five-minute data episodes collected during Phase 11 of the Combined Experiment have been characterized by the mean, minimum, maximum, and standard deviation of all data channels, except the blade surface pressures. Inflow condition, aerodynamic force coefficient, and minimum leading edge pressure coefficient databases have also been established, characterizing each of nearly 21,000 blade rotational cycles. In addition, a number of tools have been developed for searching these databases for particular episodes of interest. Due to their extensive size, only a portion of the episode characterization databases are included in an appendix, and examples of the cycle characterization databases are given. The search tools are discussed and the FORTRAN or C code for each is included in appendices.

Miller, M.S.; Shipley, D.E.; Young, T.S.; Robinson, M.C.; Luttges, M.W. [Colorado Univ., Boulder, CO (United States); Simms, D.A. [National Renewable Energy Lab., Golden, CO (United States)

1995-11-01T23:59:59.000Z

324

SHIELDING ANALYSIS FOR PORTABLE GAUGING COMBINATION SOURCES  

SciTech Connect (OSTI)

Radioisotopic decay has been used as a source of photons and neutrons for industrial gauging operations since the late 1950s. Early portable moisture/density gauging equipment used Americium (Am)-241/Beryllium (Be)/Cesium (Cs)-137 combination sources to supply the required nuclear energy for gauging. Combination sources typically contained 0.040 Ci of Am-241 and 0.010 Ci of CS-137 in the same source capsule. Most of these sources were manufactured approximately 30 years ago. Collection, transportation, and storage of these sources once removed from their original device represent a shielding problem with distinct gamma and neutron components. The Off-Site Source Recovery (OSR) Project is planning to use a multi-function drum (MFD) for the collection, shipping, and storage of AmBe sources, as well as the eventual waste package for disposal. The MFD is an approved TRU waste container design for DOE TRU waste known as the 12 inch Pipe Component Overpack. As the name indicates, this drum is based on a 12 inch ID stainless steel weldment approximately 25 inch in internal length. The existing drum design allows for addition of shielding within the pipe component up to the 110 kg maximum pay load weight. The 12 inch pipe component is packaged inside a 55-gallon drum, with the balance of the interior space filled with fiberboard dunnage. This packaging geometry is similar to the design of a DOT 6M, Type B shipping container.

J. TOMPKINS; L. LEONARD; ET AL

2000-08-01T23:59:59.000Z

325

Combined cold compressor/ejector helium refrigerator  

DOE Patents [OSTI]

A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

Brown, D.P.

1984-06-05T23:59:59.000Z

326

Combined cold compressor/ejector helium refrigerator  

DOE Patents [OSTI]

A refrigeration apparatus having an ejector operatively connected with a cold compressor to form a two-stage pumping system. This pumping system is used to lower the pressure, and thereby the temperature of a bath of boiling refrigerant (helium). The apparatus as thus arranged and operated has substantially improved operating efficiency when compared to other processes or arrangements for achieving a similar low pressure.

Brown, Donald P. (Southold, NY)

1985-01-01T23:59:59.000Z

327

Development of an underwater spin facility for combined environment testing  

SciTech Connect (OSTI)

In response to a request from the US Government, Sandia National Laboratories has developed an instrumentation system to monitor the conditions along an underwater, rotating drive shaft. It was desired to study the structural integrity and signal acquisition capabilities of the Shaft Instrumentation System (SIS) in an environment which closely simulates the actual deployment conditions. In this manner, the SIS response to ill-defined conditions, such as flow field turbulence or temperature fluctuations, could be determined. An Underwater Spin Facility was developed in order to verify the operation of the instrumentation and telemetric data acquisition system in a combined environment of external pressure, transient axial loads and centrifugal force. The main components of the Underwater Spin Facility are a large, five foot diameter pressure vessel, a dynamically sealed shaft, a drive train assembly and a shaker table interface which is used to apply the axial loads. This paper presents a detailed description of the design of the Underwater Spin Facility. It also discusses the SIS certification test program in order to demonstrate the successful performance of the Underwater Spin Facility. 8 refs., 10 figs.

Roach, D.P.; Nusser, M.A.

1991-01-01T23:59:59.000Z

328

Combining attosecond XUV pulses with coincidence spectroscopy  

SciTech Connect (OSTI)

Here we present a successful combination of an attosecond beamline with a COLTRIMS apparatus, which we refer to as AttoCOLTRIMS. The setup provides either single attosecond pulses or attosecond pulse trains for extreme ultraviolet-infrared pump-probe experiments. We achieve full attosecond stability by using an active interferometer stabilization. The capability of the setup is demonstrated by means of two measurements, which lie at the heart of the COLTRIMS detector: firstly, we resolve the rotating electric field vector of an elliptically polarized few-cycle infrared laser field by attosecond streaking exploiting the access to the 3D momentum space of the charged particles. Secondly, we show streaking measurements on different atomic species obtained simultaneously in a single measurement making use of the advantage of measuring ions and electrons in coincidence. Both of these studies demonstrate the potential of the AttoCOLTRIMS for attosecond science.

Sabbar, M., E-mail: msabbar@phys.ethz.ch; Heuser, S.; Boge, R.; Lucchini, M.; Cirelli, C.; Keller, U. [Department of Physics, ETH Zurich, 8093 Zurich (Switzerland); Gallmann, L. [Department of Physics, ETH Zurich, 8093 Zurich (Switzerland); Institute of Applied Physics, University of Bern, 3012 Bern (Switzerland)

2014-10-15T23:59:59.000Z

329

Combining Modeling and Gaming for Predictive Analytics  

SciTech Connect (OSTI)

Many of our most significant challenges involve people. While human behavior has long been studied, there are recent advances in computational modeling of human behavior. With advances in computational capabilities come increases in the volume and complexity of data that humans must understand in order to make sense of and capitalize on these modeling advances. Ultimately, models represent an encapsulation of human knowledge. One inherent challenge in modeling is efficient and accurate transfer of knowledge from humans to models, and subsequent retrieval. The simulated real-world environment of games presents one avenue for these knowledge transfers. In this paper we describe our approach of combining modeling and gaming disciplines to develop predictive capabilities, using formal models to inform game development, and using games to provide data for modeling.

Riensche, Roderick M.; Whitney, Paul D.

2012-08-22T23:59:59.000Z

330

Combined Experiment Phase 1. Final report  

SciTech Connect (OSTI)

How does wind tunnel airfoil data differ from the airfoil performance on an operating horizontal axis wind turbine (HAWT)? The National Renewable Energy laboratory has been conducting a comprehensive test program focused on answering this question and understanding the basic fluid mechanics of rotating HAWT stall aerodynamics. The basic approach was to instrument a wind rotor, using an airfoil that was well documented by wind tunnel tests, and measure operating pressure distributions on the rotating blade. Based an the integrated values of the pressure data, airfoil performance coefficients were obtained, and comparisons were made between the rotating data and the wind tunnel data. Care was taken to the aerodynamic and geometric differences between the rotating and the wind tunnel models. This is the first of two reports describing the Combined Experiment Program and its results. This Phase I report covers background information such as test setup and instrumentation. It also includes wind tunnel test results and roughness testing.

Butterfield, C.P.; Musial, W.P.; Simms, D.A.

1992-10-01T23:59:59.000Z

331

A comparison of ground source heat pumps and micro-combined heat and power as residential greenhouse gas reduction strategies  

E-Print Network [OSTI]

Both ground source heat pumps operating on electricity and micro-combined heat and power systems operating on fossil fuels offer potential for the reduction of green house gas emissions in comparison to the conventional ...

Guyer, Brittany (Brittany Leigh)

2009-01-01T23:59:59.000Z

332

Gasification combined cycle: Carbon dioxide recovery, transport, and disposal  

SciTech Connect (OSTI)

The objective of the project is to develop engineering evaluations of technologies for the capture, use, and disposal of carbon dioxide (CO{sub 2}). This project emphasizes CO{sub 2}-capture technologies combined with integrated gasification combined-cycle (IGCC) power systems. Complementary evaluations address CO{sub 2} transportation, CO{sub 2} use, and options for the long-term sequestering of unused CO{sub 2}. Commercially available CO{sub 2}-capture technology is providing a performance and economic baseline against which to compare innovative technologies. The intent is to provide the CO{sub 2} budget, or an {open_quotes}equivalent CO{sub 2}{close_quotes} budget, associated with each of the individual energy-cycle steps, in addition to process design capital and operating costs. The value used for the {open_quotes}equivalent CO{sub 2}{close_quotes} budget is 1 kg of CO{sub 2} per kilowatt-hour (electric). The base case is a 458-MW IGCC system that uses an air-blown Kellogg-Rust-Westinghouse agglomerating fluidized-bed gasifier, Illinois No. 6 bituminous coal feed, and in-bed sulfur removal. Mining, feed preparation, and conversion result in a net electric power production of 454 MW, with a CO{sub 2} release rate of 0.835 kg/kWhe. Two additional life-cycle energy balances for emerging technologies were considered: (1) high-temperature CO{sub 2} separation with calcium- or magnesium-based sorbents, and (2) ambient-temperature facilitated-transport polymer membranes for acid-gas removal.

Doctor, R.D.; Molburg, J.C.; Thimmapuram, P.R.; Berry, G.F.; Livengood, C.D.

1994-09-01T23:59:59.000Z

333

Combined Final Report for Colony II Project  

SciTech Connect (OSTI)

(This report was originally submmited by the lead PI (Terry Jones, ORNL) on October 22, 2013 to the program manager, Lucy Nowell. It is being submitted from University of Illinois in accordance with instructions). HPC Colony II seeks to provide portable performance for leadership class machines. Our strategy is based on adaptive system software that aims to make the intelligent decisions necessary to allow domain scientists to safely focus on their task at hand and allow the system software stack to adapt their application to the underlying architecture. This report describes the research undertaken towards these objectives and the results obtained over the performance period of the project.

Kale, Laxmikant [University of Illinois] [University of Illinois; Jones, Terry [Oak Ridge National Laboratory] [Oak Ridge National Laboratory; Moreira, Jose [IBM Corp.] [IBM Corp.

2013-10-23T23:59:59.000Z

334

Probable projectile-target combinations for the synthesis of super heavy nucleus $^{286}$112  

E-Print Network [OSTI]

The fusion cross sections for the reactions of all the projectile-target combinations found in the cold valleys of $^{286}$112 have been studied using scattering potential as the sum of Coulomb and proximity potential, so as to predict the most probable projectile-target combinations in heavy ion fusion reactions for the synthesis of super heavy nucleus $^{286}$112. While considering the nature of potential pockets and half lives of the colliding nuclei, the systems $^{82}$Ge + $^{204}$Hg, $^{80}$Ge + $^{206}$Hg and $^{78}$Zn + $^{208}$Pb found in the deep cold valley region and the systems $^{48}$Ca+$^{238}$U, $^{38}$S+$^{248}$Cm and $^{44}$Ar+$^{242}$Pu in the cold valleys are predicted to be the better optimal projectile-target combinations for the synthesis of super heavy nucleus $^{286}$112.

K. P. Santhosh; V. Bobby Jose

2014-03-28T23:59:59.000Z

335

Combining Decision Procedures for Sorted Theories  

E-Print Network [OSTI]

setting, nor is it obvious that the method in fact lifts as is to logics with sorts. To bridge this gap decision procedures for logical theories arises in many areas of computer science and artificial to Nelson and Oppen [8]. This method is at the heart of the verification systems cvc [9], argo-lib [6

Tinelli, Cesare

336

Combination of Indoor and Outdoor Positioning  

E-Print Network [OSTI]

and Photogrammetry June 24-26, 2008 ETH Zurich #12;June 24-26, 2008 ETH Zurich Positioning Requirements Overview local installations: none accuracy: mm - cm coverage: global June 24-26, 2008 ETH Zurich all & Outlook #12;June 24-26, 2008 ETH Zurich Positioning Requirements Overview of Systems GNSS Alternative

337

Optimal combined wind power forecasts using exogeneous variables  

E-Print Network [OSTI]

Optimal combined wind power forecasts using exogeneous variables Fannar šOrn Thordarson Kongens of the thesis is combined wind power forecasts using informations from meteorological forecasts. Lyngby, January

338

Duality in spaces of finite linear combinations of atoms  

E-Print Network [OSTI]

Duality in spaces of finite linear combinations of atoms Fulvio Ricci and Joan Verdera Abstract In this note we describe the dual and the completion of the space of finite linear combinations of (p, )-atoms, )-atoms, 0

Ricci, Fulvio

339

Alaska Gateway School District Adopts Combined Heat and Power...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Alaska Gateway School District Adopts Combined Heat and Power Alaska Gateway School District Adopts Combined Heat and Power May 7, 2013 - 12:00am Addthis In Tok, Alaska, the...

340

The Intelligent Combination of Input Shaping and PID Feedback Control  

E-Print Network [OSTI]

The Intelligent Combination of Input Shaping and PID Feedback Control A Dissertation Presented Combination of Input Shaping and PID Feedback Control Approved by: Dr. William Singhose, Advisor School . . . . . . . . . . . . . . . . . . . . 8 1.4 PID Feedback Control . . . . . . . . . . . . . . . . . . . . . . . . . . 14 1.5 Comparison

Singhose, William

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Combined Heat and Power: A Technology Whose Time Has Come  

E-Print Network [OSTI]

Incentives for Combined Heat and Power, U.S. E NVTL . PCombined Heat and Power: A Technology Whose Time Has ComeWashington, D.C. COMBINED HEAT AND POWER A. Create an

Ferraina, Steven

2014-01-01T23:59:59.000Z

342

Combination process for upgrading residual oils  

SciTech Connect (OSTI)

This patent describes a method for upgrading high boiling residual portions of crude oils comprising metal contaminants, porphyrins, asphaltenes and high molecular weight multi-ring hydrocarbon material. It comprises: charging a high boiling residual portion of crude oil admixed with diluent in contact with suspended upflowing substantially inert fluidizable solids particulate material at an elevated thermal visbreaking temperature in a riser contact zone for a time sufficient to recover therefrom a vaporous hydrocarbon product higher boiling than gasoline partially decarbonized and demetallized to a lower contaminating metals level, quenching the vaporous product of thermal visbreaking below its dew point after separation from solids, charging quenched thermally modified high boiling hydrocarbon product with a crystalline zeolite cracking catalyst under cracking conditions for a hydrocarbon residence time in a riser cracking zone; recovering a hydrocarbon conversion product; separating a combined C{sub 4} minus wet gas product stream of the visbreaking and zeolite catalyst cracking operating to recover a C{sub 3}-C{sub 4} rich fraction separately from a C{sub 2} minus dry gas product fraction, and regenerating the crystalline zeolite contcontaining catalyst.

Busch, L.E.; Walters, P.W.; Zandona, O.

1990-01-16T23:59:59.000Z

343

Combination for electrolytic reduction of alumina  

DOE Patents [OSTI]

An electrolytic bath for use during the electrolytic reduction of alumina to aluminum. The bath comprises molten electrolyte having the following ingredients: AlF.sub.3 and at least one salt selected from the group consisting of NaF, KF, and LiF; and about 0.004 wt. % to about 0.2 wt. %, based on total weight of the molten electrolyte, of at least one transition metal or at least one compound of the metal or both. The compound is, a fluoride; oxide, or carbonate. The metal is nickel, iron, copper, cobalt, or molybdenum. The bath is employed in a combination including a vessel for containing the bath and at least one non-consumable anode and at least one dimensionally stable cathode in the bath. Employing the instant bath during electrolytic reduction of alumina to aluminum improves the wetting of aluminum on a cathode by reducing or eliminating the formation of non-metallic deposits on the cathode.

Brown, Craig W. (Seattle, WA); Brooks, Richard J. (Seattle, WA); Frizzle, Patrick B. (Lynnwood, WA); Juric, Drago D. (Bulleen, AU)

2002-04-30T23:59:59.000Z

344

COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov  

E-Print Network [OSTI]

COMBINED ADAPTIVE CONTROLLER FOR UAV GUIDANCE B.R. Andrievsky, A.L. Fradkov Institute for Problems vehicle (UAV) homing guidance system is pro- posed. The adaptation algorithm provides prescribed attitude adaptive controller in the case of significant uncertainty of the UAV parameters and time dependence

345

Photocatalytic generation of hydrogen from water using a cobalt pentapyridine complex in combination  

E-Print Network [OSTI]

alternative carbon-neutral energy tech- nologies. Harnessing solar energy to synthesize sustainable chemical multiple redox features on glassy carbon, including a one-proton, one-electron coupled oxidative wave systems into sustainable energy generation devices. Introduction The combination of rising global energy

346

Thermionic combustor application to combined gas and steam turbine power plants  

SciTech Connect (OSTI)

The engineering and economic feasibility of a thermionic converter topped combustor for a gas turbine is evaluated in this paper. A combined gas and steam turbine system was chosen for this study with nominal outputs of the gas and steam turbines of 70 MW and 30 MW, respectively. 7 refs.

Miskolczy, G.; Wang, C.C.; Lieb, D.P.; Margulies, A.E.; Fusegni, L.J.; Lovell, B.J.

1981-01-01T23:59:59.000Z

347

Combining rails and anchors with laser forcing for selective manipulation within 2D droplet arrays  

E-Print Network [OSTI]

demonstrate the combination of a rails and anchors microfluidic system with laser forcing to enable to anchor holes made in the base of a microfluidic channel, enabling the creation of arrays their merging and a chemical reaction to take place. Finally by adding guiding rails within the microfluidic

Boyer, Edmond

348

Geometry Optimization with QM/MM, ONIOM, and Other Combined Methods. I. Microiterations  

E-Print Network [OSTI]

Geometry Optimization with QM/MM, ONIOM, and Other Combined Methods. I. Microiterations calculation, have been very successful in describing large systems. Geometry optimization methods can take). A series of microit- erations can be employed to fully optimize the MM region for each optimization step

Schlegel, H. Bernhard

349

Combining Functional and Structural Reasoning for Safety Analysis of Electrical Designs  

E-Print Network [OSTI]

in detail. FLAME has been developed over several years, and is capable of composing an FMEA report for many Failure mode effects analysis (FMEA) of a design involves the investigation and assessment of the effects, electronic and mechanical systems are being combined in safety-critical applications. Automation of FMEA

Snooke, Neal

350

IEEE Vehicular Technology Conference, pp. 2048-2052, October 2001, Atlantic City, New Jersey Performance of Smart Antennas with Adaptive Combining at Handsets  

E-Print Network [OSTI]

IEEE Vehicular Technology Conference, pp. 2048-2052, October 2001, Atlantic City, New Jersey 2048 Performance of Smart Antennas with Adaptive Combining at Handsets for the 3GPP WCDMA System Suk Won Kim1 the performance gain of dual smart antennas with an adaptive combining at handsets for the 3GPP WCDMA system

Ha, Dong S.

351

Thermoelectrics Combined with Solar Concentration for Electrical and Thermal Cogeneration  

E-Print Network [OSTI]

the thermoelectric module, and the water cooling tubes. Tothermoelectric module, combined with the thermal power transferred by the water cooling

Jackson, Philip Robert

2012-01-01T23:59:59.000Z

352

Vibration Combined High Temperature Cycle Tests for Capacitive MEMS  

E-Print Network [OSTI]

Vibration Combined High Temperature Cycle Tests for Capacitive MEMS Accelerometers Z. Szcs, G. Nagy|nagyg|hodossy|rencz|poppe>@eet.bme.hu Abstract - In this paper vibration combined high temperature cycle tests for packaged capacitive SOI- MEMS designed and realized at BME ­ DED. Twenty thermal cycles of combined Temperature Cycle Test and Fatigue

Boyer, Edmond

353

FINAL STAFF PAPER A New Generation of Combined Heat  

E-Print Network [OSTI]

onsite or exporting it to the grid. The feasibility of meeting the state's combined heat and power goals FINAL STAFF PAPER A New Generation of Combined Heat and Power: Policy Planning. Neff , Bryan. A New Generation of Combined Heat and Power: Policy Planning for 2030. 2012. California

354

Combined Honours BA Digital Journalism and Communication, Media, and Film  

E-Print Network [OSTI]

Combined Honours BA Digital Journalism and Communication, Media, and Film Are you looking in Digital Journalism (DJ) and Communication, Media, and Film (CMF) is for you. That's because our DJ for a career combining your interests in media with a practical skill-set? If so, the Combined Honours program

355

Combined passive magnetic bearing element and vibration damper  

DOE Patents [OSTI]

A magnetic bearing system contains magnetic subsystems which act together to support a rotating element in a state of dynamic equilibrium and dampen transversely directed vibrations. Mechanical stabilizers are provided to hold the suspended system in equilibrium until its speed has exceeded a low critical speed where dynamic effects take over, permitting the achievement of a stable equilibrium for the rotating object. A state of stable equilibrium is achieved above a critical speed by use of a collection of passive elements using permanent magnets to provide their magnetomotive excitation. In a improvement over U.S. Pat. No. 5,495,221, a magnetic bearing element is combined with a vibration damping element to provide a single upper stationary dual-function element. The magnetic forces exerted by such an element, enhances levitation of the rotating object in equilibrium against external forces, such as the force of gravity or forces arising from accelerations, and suppresses the effects of unbalance or inhibits the onset of whirl-type rotor-dynamic instabilities. Concurrently, this equilibrium is made stable against displacement-dependent drag forces of the rotating object from its equilibrium position.

Post, Richard F. (Walnut Creek, CA)

2001-01-01T23:59:59.000Z

356

lara skinner, Ph.D anD sean sweeney, Ph.D Cornell University Global labor institUte  

E-Print Network [OSTI]

Canada's keystone Xl Pipeline 6 the Potential impact of tar sands spills on Jobs and the economy 6 transCanada inflates keystone Xl Job numbers 11 agriculture in the Pipeline states 12 when a spill Happens: social. To date, a comprehensive spills risk assessment for the proposed Keystone XL pipeline has not been

Angenent, Lars T.

357

Combined electrophoresis-electrospray interface and method  

DOE Patents [OSTI]

An improvement to the system and method is disclosed for analyzing molecular constituents of a composition sample that comprises improvements to an electrospray ionization source for interfacing to mass spectrometers and other detection devices. The improvement consists of establishing a unique electrical circuit pattern and nozzle configuration, a metallic coated and conical shaped capillary outlet, coupled with sizing of the capillary to obtain maximum sensitivity. 10 figs.

Smith, R.D.; Udseth, H.R.; Barinaga, C.J.

1995-06-13T23:59:59.000Z

358

Energy dispatch schedule optimization and cost benefit analysis for grid-connected, photovoltaic-battery storage systems  

E-Print Network [OSTI]

photovoltaic systems with battery storages control based onconnected, photovoltaic-battery storage systems A. Nottrott,combined photovoltaic-battery storage system (PV+ system).

Nottrott, A.; Kleissl, J.; Washom, B.

2013-01-01T23:59:59.000Z

359

Integrated Energy Systems (IES) for Buildings: A Market Assessment...  

Broader source: Energy.gov (indexed) [DOE]

Energy Systems (IES) for Buildings: A Market Assessment, September 2002 Integrated Energy Systems (IES) combine on-site power or distributed generation technologies with thermally...

360

Carbon and Energy Savings from Combined Heat and Power: A Closer Look  

E-Print Network [OSTI]

Credit for 4. U. S. Department of Commerce, Bureau of Combined Heat and Power (CHP) Systems, the Census. 1975. Historical Statistics of http://www.ustreas.gov/press/releases/gmbk the United States: Colonial Times to 1970. 99.htm Part 2. Table P 216...CARBON AND ENERGY SAVINGS FROM COMBINED HEAT AND POWER: A CLOSER LOOK Joseph M. Roop Pacific Northwest National Laboratory P. O. Box 999 K8-17, Richland, WA 99352 (509) 372-4245 Fax: (509) 372?4370 joe.roop@pnl.gov ABSTRACT...

Roop, J. M.; Kaarsberg, T.

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Combined effects of pre-pulsing and target geometry on efficient EUV production from laser produced plasma experiments and modeling  

E-Print Network [OSTI]

and the deposition of EUV and out of band radiation can further cause surface erosion and damage at the required the optical collection system and increase its lifetime. We investigated the combined effects of pre system is also very important and is under comprehensive development and investigation. Damage

Harilal, S. S.

362

Combination process for upgrading reduced crude  

SciTech Connect (OSTI)

A process is described for the conversion of a feed containing high boiling hydrocarbons and having Conradson carbon producing materials, which process is carried out in a hydrocarbon conversion system comprising a riser conversion zone and a regeneration zone. The process consists of: A. contacting the feed with a fluid hydrocarbon conversion catalyst in the riser conversion zone in the presence of water and a first CO-rich flue gas to form a gasiform effluent containing lower molecule weight hydrocarbons and coke on the catalyst; B. separating the gasiform effluent from the coked catalyst; C. regenerating the coked catalyst in the regeneration zone consisting of a first regeneration stage and a second regeneration stage; D. sending the regenerated catalyst to the riser conversion zone; E. separating the gasiform effluent from and riser conversion zone into a C/sub 2/-minus gaseous product, a C/sub 3/-plus hydrocarbon product and a water-containing condensation product and recovering separately therefrom hydrogen; F. purifying the hydrogen to form purified hydrogen for use in producing a synthesis gas; and G. recovering useful hydrocarbon products from the C/sub 3/-plus hydrocarbon product.

Hettinger, W.P.

1986-08-19T23:59:59.000Z

363

Improved gas tagging and cover gas combination for nuclear reactor  

DOE Patents [OSTI]

The invention discloses the use of stable isotopes of neon and argon, sealed as tags in different cladding nuclear fuel elements to be used in a liquid metal fast breeder reactor. Cladding failure allows fission gases and these tag isotopes to escape and to combine with the cover gas. The isotopes are Ne/sup 20/, Ne/sup 21/ and Ne/sup 22/ and Ar/sup 36/, Ar/sup 38/ and Ar/sup 40/, and the cover gas is He. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between 0 and -25/sup 0/C to remove the fission gases from the cover gas and tags, and the second or tag recovery system bed between -170 and -185/sup 0/C to isolate the tags from the cover gas. Spectrometric analysis is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be determined.

Gross, K.C.; Laug, M.T.

1983-09-26T23:59:59.000Z

364

Gas tagging and cover gas combination for nuclear reactor  

DOE Patents [OSTI]

The invention discloses the use of stable isotopes of neon and argon, that are grouped in preselected different ratios one to the other and are then sealed as tags in different cladded nuclear fuel elements to be used in a liquid metal fast breeder reactor. Failure of the cladding of any fuel element allows fission gases generated in the reaction and these tag isotopes to escape and to combine with the cover gas held in the reactor over the fuel elements. The isotopes specifically are Ne.sup.20, Ne.sup.21 and Ne.sup.22 of neon and Ar.sup.36, Ar.sup.38 and Ar.sup.40 of argon, and the cover gas is helium. Serially connected cryogenically operated charcoal beds are used to clean the cover gas and to separate out the tags. The first or cover gas cleanup bed is held between approximately 0.degree. and -25.degree. C. operable to remove the fission gases from the cover gas and tags and the second or tag recovery system bed is held between approximately -170.degree. and -185.degree. C. operable to isolate the tags from the cover gas. Spectrometric analysis further is used to identify the specific tags that are recovered, and thus the specific leaking fuel element. By cataloging the fuel element tags to the location of the fuel elements in the reactor, the location of the leaking fuel element can then be specifically determined.

Gross, Kenny C. (Lemont, IL); Laug, Matthew T. (Idaho Falls, ID)

1985-01-01T23:59:59.000Z

365

Combination and Integration of DPF-SCR Aftertreatment Technologies  

Broader source: Energy.gov (indexed) [DOE]

INTEGRATION OVERVIEW Start - Oct 2008 Finish - Oct 2012 37% complete Barriers addressed Heavy truck thermal efficiency Aftertreatment cost Combined NOx and PM emissions * Total...

366

Combining Functional and Structural Genomics to Sample the Essential...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Functional and Structural Genomics to Sample the Essential Burkholderia Structome. Combining Functional and Structural Genomics to Sample the Essential Burkholderia Structome....

367

antiretroviral drug combination: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

carrying various combinations Ahlers, Guenter 3 Antiretroviral HIV treatment and care for injecting drug users: an evidence-based overview Physics Websites Summary: 1...

368

Combined Heat and Power with Your Local Utility  

Broader source: Energy.gov [DOE]

Presentation—given at the Fall 2012 Federal Utility Partnership Working Group (FUPWG) meeting—covers combined heat and power (CHP) and its uses, configurations, considerations, and more.

369

Mid-Atlantic Region Combined Heat and Power Projects  

Broader source: Energy.gov [DOE]

DOE's CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

370

ITP Industrial Distributed Energy: Combined Heat and Power: Effective...  

Broader source: Energy.gov (indexed) [DOE]

Energy Solutions for a Sustainable Future ITP Industrial Distributed Energy: Combined Heat and Power: Effective Energy Solutions for a Sustainable Future Report describing the...

371

adult combination antiretroviral: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

suction feeding, while clades that lack larvae or that have specialized larval feeding James C. O& apos; reilly; Stephen M. Deban; Kiisa C. Nishikawa 112 COMBINING APPROACHES TO...

372

Improved Wind Turbine Drivetrain Reliability using a Combined...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

IMPROVED WIND TURBINE DRIVETRAIN RELIABILITY USING A COMBINED EXPERIMENTAL, COMPUTATIONAL, AND ANALYTICAL APPROACH Yi Guo 1,* , Roger Bergua 2 , Jeroen van Dam 1 , Jordi Jove 2 ,...

373

Y-12 Site Office Recognized For Contributions To Combined Federal...  

National Nuclear Security Administration (NNSA)

To ... Y-12 Site Office Recognized For Contributions To Combined Federal Campaign OAK RIDGE, Tenn. -- Employees of the National Nuclear Security Administration's Y-12 Site...

374

Combining Raman Microprobe and XPS to Study High Temperature...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

spectroscopy. Citation: Windisch CF, Jr, CH Henager, MH Engelhard, and WD Bennett.2011."Combining Raman Microprobe and XPS to Study High Temperature Oxidation of...

375

ITP Distributed Energy: Combined Heat and Power Market Assessment...  

Broader source: Energy.gov (indexed) [DOE]

Governor COMBINED HEAT AND POWER MARKET ASSESSMENT Prepared For: California Energy Commission Public Interest Energy Research Program Prepared By: ICF International,...

376

Vehicle Technologies Office Merit Review 2014: A Combined Experimental...  

Energy Savers [EERE]

2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about a combined experimental and modeling approach for...

377

Combined Quantum Mechanical and Molecular Mechanics Studies of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mechanical and Molecular Mechanics Studies of the Electron-Transfer Reactions Involving Carbon Tetrachloride in Combined Quantum Mechanical and Molecular Mechanics Studies of the...

378

Use of a combined lining in copper production converters  

SciTech Connect (OSTI)

The authors look at materials and methods for increasing the liner life and thermal efficiency of converters used at three copper melting combines in the Soviet Union. The refractories tested are various commercial combinations of magnesite, periclase and chromite, and the properties for which they are tested include their compression strength, heat resistance, thermal expansion, and wear resistance to slag. The authors find the refractory combination least degradable by heat and wear and calculate the savings, both in cost and energy, achieved by the combines in question by the utilization of this liner material.

Birkle, G.V.B.; Slovikovski, V.V.; Danilova, T.A.; P'yankova, V.A.; Verzilov, N.A.

1987-01-01T23:59:59.000Z

379

Combined Heat and Power: A Technology Whose Time Has Come  

E-Print Network [OSTI]

energy efficient and environmentally friendly technology.Combined Heat and Power: A Technology Whose Time Has Comesteps to utilize the technology. 9 The average increase in

Ferraina, Steven

2014-01-01T23:59:59.000Z

380

A combined climate extremes index for the Australian Region .  

E-Print Network [OSTI]

??Changes in the area of Australia experiencing concurrent temperature and rainfall extremes are investigated through the use of two combined indices. The indices describe variations… (more)

Gallant, Ailie J. E.

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Diesel Particulate Oxidation Model: Combined Effects of Fixed...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Volatile Carbon Diesel Particulate Oxidation Model: Combined Effects of Fixed & Volatile Carbon Poster presented at the 16th Directions in Engine-Efficiency and Emissions Research...

382

Can combining economizers with improved filtration save energy and  

E-Print Network [OSTI]

LBNL-2939E Can combining economizers with improved filtration save energy and protect equipment of California. #12;1 Can combining economizers with improved filtration save energy and protect equipment economizers in data centers to save energy while controlling particle concentrations with high-quality air

383

Combined Pollution Prevention Assessments 98-MP13B.02  

E-Print Network [OSTI]

1 Combined Pollution Prevention Assessments 98-MP13B.02 Harry W. Edwards Department of Mechanical-97 Colorado State University Industrial Assessment Center (CSU IAC) combined pollution prevention assessments, pollution prevention, and productivity improvement. The total number of assessment recommendations is 176

384

Duality in spaces of finite linear combinations of atoms  

E-Print Network [OSTI]

Duality in spaces of finite linear combinations of atoms Fulvio Ricci and Joan Verdera Abstract In this note we describe the dual and the completion of the space of finite linear combinations of (p, #)­atoms, #)­atoms, 0

Verdera, Joan

385

The optimal combined design of climate mitigation and geoengineering  

E-Print Network [OSTI]

Combined climate mitigation/geoengineering approach has better economic utility, less emission control rate and temperature increase than mitigation alone. If setting the 50% reduction rate and 2^\\circC temperature increase as constrains, we find there is no a feasible solution for emission control, but combined design is still available.

Liang, Wang

2010-01-01T23:59:59.000Z

386

Corrosion Investigations at Masned Combined Heat and Power Plant  

E-Print Network [OSTI]

Corrosion Investigations at MasnedĂž Combined Heat and Power Plant Part VI Melanie Montgomery AT MASNEDĂ? COMBINED HEAT AND POWER PLANT PART VI CONTENTS 1. Introduction Department for Manufacturing Engineering Technical University of Denmark Asger Karlsson Energi E2 Power

387

The Combination of Competitive Evolution and an Interactive Environment  

E-Print Network [OSTI]

The Combination of Competitive Evolution and an Interactive Environment Julie Corder and Ross- ronment. We explore the combination of competitive evolution, and an interactive environment. A population, and potential remedies, are discussed. 1 Introduction In studying intelligence, the environment in which

Meeden, Lisa A.

388

ORIGINAL ARTICLE Combining high-throughput sequencing with fruit  

E-Print Network [OSTI]

ORIGINAL ARTICLE Combining high-throughput sequencing with fruit body surveys reveals contrasting communities were mostly confined to fruit bodies, whereas mycelial interactions were studied in the laboratory. Here we combine high-throughput sequencing with a fruit body inventory to study simultaneously mycelial

Bruns, Tom

389

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES  

E-Print Network [OSTI]

MANUFACTURABILITY ANALYSIS TO COMBINE ADDITIVE AND SUBTRACTIVE PROCESSES Authors: Olivier Kerbrat of the tool may advantageously be machined or manufactured by an additive process. Originality/value: Nowadays is proposed to combine additive and subtractive processes, for tooling design and manufacturing

Paris-Sud XI, Université de

390

Optimal Scheduling of Industrial Combined Heat and Power Plants  

E-Print Network [OSTI]

Optimal Scheduling of Industrial Combined Heat and Power Plants under Time-sensitive Electricity Prices Sumit Mitra , Lige Sun , Ignacio E. Grossmann December 24, 2012 Abstract Combined heat and power companies. However, under-utilization can be a chance for tighter interaction with the power grid, which

Grossmann, Ignacio E.

391

A combined wind wavetidal model for the Venice lagoon, Italy  

E-Print Network [OSTI]

A combined wind wave­tidal model for the Venice lagoon, Italy L. Carniello and A. Defina Department between waves and tide propagation. The combined wind wave­tidal model is applied to the Venice lagoon. Particular attention is devoted to the dissipation of wave energy at the steep boundaries between channels

Fagherazzi, Sergio

392

Array combination for parallel imaging in Magnetic Resonance Imaging  

E-Print Network [OSTI]

......................................103 Figure 51. Diagram of geometry used...........................................................................104 Figure 52. 64 element 8x8 grid array SNR map using 64 receivers. ............................105 Figure 53. 64 element 8x8 grid...-factor maps for point combined array......................................................117 Figure 63. SENSE reconstructions using point combined array...................................118 Figure 64. Grid array geometry used for simulation...

Spence, Dan Kenrick

2007-09-17T23:59:59.000Z

393

Valid flow combinations for stable sheath in a magnetized multiple ion species plasma  

SciTech Connect (OSTI)

Theoretical study is done of the entry criterion for the plasma flow into the electrostatic boundary layer, or sheath, forming in a magnetized multiple ion species plasma. Finding valid entry velocity combinations in a magnetized set up requires a magnetized equivalent of the generalized Bohm criterion. A magnetized generalized entry criterion is obtained with the scale length distribution in a region of validity for the stable solutions. The analysis finds that the valid entry flow velocity combinations with distinct values of individual ion species can correspond to a unique system phase velocity. Magnetization effects govern the region of validity whose boundaries collapse to the unmagnetized sheath criterion in the limit of normal incidence, independent of the strength of the magnetic field. Considerably smaller entry velocities, in comparison to the unmagnetized system sound velocity, are recovered for the species in appropriate regime of magnetization in the cases of oblique incidences.

Sharma, Devendra; Kaw, Predhiman K. [Institute for Plasma Research, Bhat, Gandhinagar 382428 (India)

2012-11-15T23:59:59.000Z

394

On-Site Wastewater Treatment Systems: Alternative Collection Systems  

E-Print Network [OSTI]

Rural Texas communities have new options for wastewater management infrastructure that are cost effective but still protect human health and environmental quality. Such communities now can combine different kinds of systems in a new approach called...

Lesikar, Bruce J.

2000-08-30T23:59:59.000Z

395

Superconducting FCL using a combined inducted magnetic field trigger and shunt coil  

DOE Patents [OSTI]

A single trigger/shunt coil is utilized for combined induced magnetic field triggering and shunt impedance. The single coil connected in parallel with the high temperature superconducting element, is designed to generate a circulating current in the parallel circuit during normal operation to aid triggering the high temperature superconducting element to quench in the event of a fault. The circulating current is generated by an induced voltage in the coil, when the system current flows through the high temperature superconducting element.

Tekletsadik, Kasegn D. (Rexford, NY)

2007-10-16T23:59:59.000Z

396

Integrated gasification combined-cycle research development and demonstration activities in the US  

SciTech Connect (OSTI)

The United States Department of Energy (DOE)`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D) program that supports the commercialization of integrated gasification combined-cycle (IGCC) advanced power systems. This overview briefly describes the supporting RD&D activities and the IGCC projects selected for demonstration in the Clean Coal Technology (CCT) Program.

Ness, H.M.; Brdar, R.D.

1996-09-01T23:59:59.000Z

397

Integrated gasification combined-cycle research development and demonstration activities in the U.S.  

SciTech Connect (OSTI)

The United States Department of Energy (DOE) has selected seven integrated gasification combined-cycle (IGCC) advanced power systems for demonstration in the Clean Coal Technology (CCT) Program. DOE`s Office of Fossil Energy, Morgantown Energy Technology Center, is managing a research development and demonstration (RD&D)program that supports the CCT program, and addresses long-term improvements in support of IGCC technology. This overview briefly describes the CCT projects and the supporting RD&D activities.

Ness, H.M.

1994-12-31T23:59:59.000Z

398

This paper was published in the proceedings of the Terrastock 2000 conference. The correct citation is  

E-Print Network [OSTI]

of underground thermal energy storage (UTES) systems and ground source heat pump (GSHP) systems. The design and simulation of ground loop heat exchangers used in ground source heat pump systems and underground thermal types) of soil or rock that surrounds the borehole. Once the type of soil or rock is determined, its

399

Dynamic Impregnator Reactor System (Poster)  

SciTech Connect (OSTI)

IBRF poster developed for the IBRF showcase. Describes the multifarious system designed for complex feedstock impregnation and processing. IBRF feedstock system has several unit operations combined into one robust system that provides for flexible and staged process configurations, such as spraying, soaking, low-severity pretreatment, enzymatic hydrolysis, fermentation, concentration/evaporation, and distillation.

Not Available

2012-09-01T23:59:59.000Z

400

RENEWABLES RESEARCH Boiler Burner Energy System Technology  

E-Print Network [OSTI]

RENEWABLES RESEARCH Boiler Burner Energy System Technology (BBEST) for Firetube Boilers PIER Renewables Research September 2010 The Issue Researchers at Altex Technologies Corporation in Sunnyvale, industrial combined heat and power (CHP) boiler burner energy system technology ("BBEST"). Their research

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Optimal selection of on-site generation with combined heat and power applications  

E-Print Network [OSTI]

Modeling with Combined Heat and Power Applications. LBNL-Tax on Microgrid Combined Heat and Power Adoption. JournalGeneration with Combined Heat and Power Applications Afzal

Siddiqui, Afzal S.; Marnay, Chris; Bailey, Owen; Hamachi LaCommare, Kristina

2004-01-01T23:59:59.000Z

402

Distributed energy resources customer adoption modeling with combined heat and power applications  

E-Print Network [OSTI]

Modeling with Combined Heat and Power Applications SCE, S.Modeling with Combined Heat and Power Applications FigureModeling with Combined Heat and Power Applications Figure

Siddiqui, Afzal S.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael; Edwards, Jennifer L.; Marnay, Chris

2003-01-01T23:59:59.000Z

403

Effects of a carbon tax on microgrid combined heat and power adoption  

E-Print Network [OSTI]

Modeling with Combined Heat and Power Applications. ”with or without combined heat and power (CHP) equipment,Carbon emissions; Combined heat and power; CHP; Distributed

Siddiqui, Afzal S.; Marnay, Chris; Edwards, Jennifer L.; Firestone, Ryan M.; Ghosh, Srijay; Stadler, Michael

2004-01-01T23:59:59.000Z

404

The CO2 Reduction Potential of Combined Heat and Power in California's Commercial Buildings  

E-Print Network [OSTI]

Modeling with Combined Heat and Power Applications,”Committee, Combined Heat and Power Workshop, CaliforniaJuly 23, 2009 Combined Heat and Power Installation

Stadler, Michael

2010-01-01T23:59:59.000Z

405

Baseline Glass Development for Combined Fission Products Waste Streams  

SciTech Connect (OSTI)

Borosilicate glass was selected as the baseline technology for immobilization of the Cs/Sr/Ba/Rb (Cs), lanthanide (Ln) and transition metal fission product (TM) waste steams as part of a cost benefit analysis study.[1] Vitrification of the combined waste streams have several advantages, minimization of the number of waste forms, a proven technology, and similarity to waste forms currently accepted for repository disposal. A joint study was undertaken by Pacific Northwest National Laboratory (PNNL) and Savannah River National Laboratory (SRNL) to develop acceptable glasses for the combined Cs + Ln + TM waste streams (Option 1) and Cs + Ln combined waste streams (Option 2) generated by the AFCI UREX+ set of processes. This study is aimed to develop baseline glasses for both combined waste stream options and identify key waste components and their impact on waste loading. The elemental compositions of the four-corners study were used along with the available separations data to determine the effect of burnup, decay, and separations variability on estimated waste stream compositions.[2-5] Two different components/scenarios were identified that could limit waste loading of the combined Cs + LN + TM waste streams, where as the combined Cs + LN waste stream has no single component that is perceived to limit waste loading. Combined Cs + LN waste stream in a glass waste form will most likely be limited by heat due to the high activity of Cs and Sr isotopes.

Crum, Jarrod V.; Billings, Amanda Y.; Lang, Jesse B.; Marra, James C.; Rodriguez, Carmen P.; Ryan, Joseph V.; Vienna, John D.

2009-06-29T23:59:59.000Z

406

Thermodynamic Modeling of a Membrane Dehumidification System  

E-Print Network [OSTI]

............................................................... 157 4.5 Original and ARPA-E condition COP results for cooling tower approach of 5?F detailed simulation results for five evaporative cooling steps and membrane cooling combined system... evaporative cooling steps and membrane cooling combined system for ARPA-E inlet and outlet conditions ................................................................... 163 4.13 Cooling tower approach of 5?F detailed simulation results for five...

Bynum, John 1983-

2012-11-28T23:59:59.000Z

407

A structural approach to delay optimization in combinational circuits  

E-Print Network [OSTI]

Combinational circuit with indirect implication Combinational circuit after transformation . 17 17 Combinational circuit after reduction by redundancy elimination . . 18 Some permissible gate transformations 19 10 Fanin readjustment 21 12 Original... dgz: 5 dgs 8; ds4: 10j dss 2j dgs: 3j dsr ? lj dss: 10j dss: 2j dsss = 3, Then the data-ready times are as follows: tss ? ts ? 3 + 0 = 3; tss ? ts ? 5 + 10 = 15; tss ? ts ? 3 + 8 11 tg4: ts ? 3 + 10: 13j tgs tr 2 + max(3, 15) = 17; tss = ts = 3...

Munshi, Avinash

1999-01-01T23:59:59.000Z

408

Title COMBINATION OF THERMAL SOLAR COLLECTORS, HEAT PUMP AND THERMAL ENERGY STORAGE FOR DWELLINGS IN BELGIUM.  

E-Print Network [OSTI]

The amount of available solar energy in Belgium is more than sufficient to meet local heat demand for space heating and domestic hot water in a dwelling. However, the timing of both the availability of solar energy and the need for thermal energy, match only to a limited extent. Therefore, compact storage of the surplus of thermal energy is a critical issue. Depending on the temperature at which this energy is available, directly from the sun or indirectly through the storage, different combinations with a heat pump can be considered. By combining solar energy with a heat pump one may benefit on both sides since the fraction of solar energy increases as well as the performance of the heat pump. The aim of this thesis is to select the best out of three configurations that combine thermal solar collectors, heat pump and thermal energy storage for heating purposes in dwellings in Belgium, based on model simulations. Energetic, exergetic and economic criteria are used to evaluate the different configurations, while thermal comfort and domestic hot water tap profiles should be met. One (or more) performance index (indices) is (are) defined enabling an objective comparison between different systems. Today several systems are already commercially available on the international market [4]. Since these systems consist of different components, the system design is a crucial issue. Therefore, special attention should be paid to the sizing of the individual components, the interaction of the components within the global system, and the strategy for operational control. To study the interaction with the building, three types of buildings (already defined in a previous project) are considered.

Contact Raf; De Herdt; Roel De Coninck; Filip Van Den Schoor; Lieve Helsen

409

Linear Bellman combination for control of character animation  

E-Print Network [OSTI]

Controllers are necessary for physically-based synthesis of character animation. However, creating controllers requires either manual tuning or expensive computer optimization. We introduce linear Bellman combination as a ...

da Silva, Marco

410

Encouraging Combined Heat and Power in California Buildings  

E-Print Network [OSTI]

incentive ($/W) wind turbine waste heat to power pressurewind turbines, fuel cells, organic rankine cycle/waste heat capture, pressure reduction turbines, advanced energy storage, and combined heat and power

Stadler, Michael

2014-01-01T23:59:59.000Z

411

ITP Industrial Distributed Energy: Assessment of Large Combined...  

Broader source: Energy.gov (indexed) [DOE]

Summary Report: Assessment of Large Combined Heat and Power Market ORNL Subcontract 4000021456 Task 2 Submitted to: Oak Ridge National Laboratory P.O. Box 2008 1 Bethel Valley Road...

412

ITP Industrial Distributed Energy: Promoting Combined Heat and...  

Broader source: Energy.gov (indexed) [DOE]

1 Promoting Combined Heat and Power (CHP) for Multifamily Properties Robert Groberg, U.S. Department of Housing and Urban Development (HUD) Mike MacDonald and Patti Garland, Oak...

413

ITP Industrial Distributed Energy: HUD Combined Heat and Power...  

Broader source: Energy.gov (indexed) [DOE]

HUD COMBINED HEAT AND POWER (CHP) GUIDE 3 INTRODUCTION TO THE LEVEL 2 ANALYSIS TOOL FOR MULTIFAMILY BUILDINGS PREPARED FOR U.S. DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT BY U.S....

414

Using and Measuring the Combined Heat and Power Advantage  

E-Print Network [OSTI]

Combined Heat and Power (CHP), also known as cogeneration, refers to the integration of thermal energy with power generation. CHP is a powerful energy conservation measure that has been identified as an important greenhouse gas reduction measure...

John, T.

2011-01-01T23:59:59.000Z

415

A 6-beam combiner using superimposed volume index holographic gratings  

E-Print Network [OSTI]

In this thesis, a 6-beam combiner using multiplexed holograms in dye-doped polymer is investigated. It is realized by recording six superimposed holographic gratings, which show uniform diffraction efficiency. The coupled wave theory for N...

Yum, HoNam

2005-11-01T23:59:59.000Z

416

Bayesian Hierarchical Model for Combining Two-resolution Metrology Data  

E-Print Network [OSTI]

This dissertation presents a Bayesian hierarchical model to combine two-resolution metrology data for inspecting the geometric quality of manufactured parts. The high- resolution data points are scarce, and thus scatter over the surface being...

Xia, Haifeng

2010-01-14T23:59:59.000Z

417

Testing the weighted salience model of conceptual combination  

E-Print Network [OSTI]

features in final combinations. Additionally, similar pairs were defined with property interpretations more frequently than were dissimilar pairs, and dissimilar pairs were defined with relation interpretations more frequently than were similar pairs...

Patterson, Merryl Joy

2004-09-30T23:59:59.000Z

418

Combining Nuclear Power With Coal-to-Gasoline Conversion  

SciTech Connect (OSTI)

With coal representing 95% and oil only 2.5% of the US fossil fuel reserves and with the abundant nuclear fuel reserves in the US, such combined plants should be built in the near future. (authors)

Hamel, H.J.; Jaeger, Walter; Termuehlen, Heinz

2006-07-01T23:59:59.000Z

419

Genetic diversity and combining ability among sorghum conversion lines  

E-Print Network [OSTI]

on genetic similarities estimated using AFLP markers and (3) to estimate heterosis, general and specific combining ability for grain yield among the set of conversion lines. Genetic diversity was present in the set of conversion lines evaluated. For the lines...

Mateo Moncada, Rafael Arturo

2007-04-25T23:59:59.000Z

420

A Simpler Sieving Device: Combining ECM and TWIRL  

E-Print Network [OSTI]

A Simpler Sieving Device: Combining ECM and TWIRL Willi Geiselmann 1 , Fabian Januszewski 2, UniversitË?at Karlsruhe (TH), 76128 Karlsruhe, Germany fabian.januszewski@math.uni­karlsruhe.de 3 Horst G

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

A Simpler Sieving Device: Combining ECM and TWIRL  

E-Print Network [OSTI]

A Simpler Sieving Device: Combining ECM and TWIRL Willi Geiselmann1 , Fabian Januszewski2 , Hubertšat Karlsruhe (TH), 76128 Karlsruhe, Germany fabian.januszewski@math.uni-karlsruhe.de 3 Horst Gšortz Institute

422

Transfer Function Combinations Liang Zhou, Mathias Schott, Charles Hansen  

E-Print Network [OSTI]

and Imaging Institute, University of Utah, 72 S Central Campus Drive, Salt Lake City, UT 84112, United StatesTransfer Function Combinations Liang Zhou, Mathias Schott, Charles Hansen Scientific Computing

Utah, University of

423

Resonant Soft X-Ray Scattering - Combining Structural with Spectroscop...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Resonant Soft X-Ray Scattering - Combining Structural with Spectroscopic Refinement Friday, September 28, 2012 - 10:00am SLAC, Bldg. 137, Room 322 SSRL Presents Kevin Stone X-ray...

424

General and specific combining ability in a beef cattle herd  

E-Print Network [OSTI]

GENERAL AND SPECIFIC COMBINING ABILITV IN A BEEF CATTLE HERD A Thesis By JAMES EDMOND BROWN Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE January... 1967 Major Sub)ect: Animal Breeding GENERAL AND SPECIFIC COMBINING ABILITY IN A BEEF CATTLE HERD A Thesis By JAMES EDMOND BROWN Approved as to style and content by: (Chairman of Committee) (Head of Department) (M ' ber) I /~ (Member) (Member...

Brown, James Edmond

1967-01-01T23:59:59.000Z

425

Combined Heat and Power Basics | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels DataCombined Heat & Power Deployment »Technical Assistance » Combined Heat

426

E-Print Network 3.0 - artemisinin-based combination treatments...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

combination in curative treatment among children suffering uncomplicated malaria in rural... 2008 KEYWORDS Malaria; Drug combination therapy; Adherence; ... Source: Ecole...

427

Solar system fault detection  

DOE Patents [OSTI]

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, R.B.; Pruett, J.C. Jr.

1984-05-14T23:59:59.000Z

428

Solar system fault detection  

DOE Patents [OSTI]

A fault detecting apparatus and method are provided for use with an active solar system. The apparatus provides an indication as to whether one or more predetermined faults have occurred in the solar system. The apparatus includes a plurality of sensors, each sensor being used in determining whether a predetermined condition is present. The outputs of the sensors are combined in a pre-established manner in accordance with the kind of predetermined faults to be detected. Indicators communicate with the outputs generated by combining the sensor outputs to give the user of the solar system and the apparatus an indication as to whether a predetermined fault has occurred. Upon detection and indication of any predetermined fault, the user can take appropriate corrective action so that the overall reliability and efficiency of the active solar system are increased.

Farrington, Robert B. (Wheatridge, CO); Pruett, Jr., James C. (Lakewood, CO)

1986-01-01T23:59:59.000Z

429

Pupillary efficient lighting system  

DOE Patents [OSTI]

A lighting system having at least two independent lighting subsystems each with a different ratio of scotopic illumination to photopic illumination. The radiant energy in the visible region of the spectrum of the lighting subsystems can be adjusted relative to each other so that the total scotopic illumination of the combined system and the total photopic illumination of the combined system can be varied independently. The dilation or contraction of the pupil of an eye is controlled by the level of scotopic illumination and because the scotopic and photopic illumination can be separately controlled, the system allows the pupil size to be varied independently of the level of photopic illumination. Hence, the vision process can be improved for a given level of photopic illumination.

Berman, Samuel M. (San Francisco, CA); Jewett, Don L. (Mill Valley, CA)

1991-01-01T23:59:59.000Z

430

Coal diesel combined-cycle project. Comprehensive report to Congress: Clean Coal Technology Program  

SciTech Connect (OSTI)

One of the projects selected for funding is a project for the design, construction, and operation of a nominal 90 ton-per-day 14-megawatt electrical (MWe), diesel engine-based, combined-cycle demonstration plant using coal-water fuels (CWF). The project, named the Coal Diesel Combined-Cycle Project, is to be located at a power generation facility at Easton Utilities Commission`s Plant No. 2 in Easton, Talbot County, Maryland, and will use Cooper-Bessemer diesel engine technology. The integrated system performance to be demonstrated will involve all of the subsystems, including coal-cleaning and slurrying systems; a selective catalytic reduction (SCR) unit, a dry flue gas scrubber, and a baghouse; two modified diesel engines; a heat recovery steam generation system; a steam cycle; and the required balance of plant systems. The base feedstock for the project is bituminous coal from Ohio. The purpose of this Comprehensive Report is to comply with Public Law 102-154, which directs the DOE to prepare a full and comprehensive report to Congress on each project selected for award under the CCT-V Program.

Not Available

1994-05-01T23:59:59.000Z

431

Challenges In Embedded System  

E-Print Network [OSTI]

there is a collection of small CPUs in an embedded system Embedded/CPS survivability presents unique problems · Not everything will look like a smaller version of desktops · Combining desktop & embedded technology beyond seat for per-driver customization CPU CPU CPU CPU #12;8 But, Is Security An Issue For CPS? YES

Hu, Fei

432

502 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 57, NO. 1, JANUARY 2008 Combined Guard Channel and Mobile-Assisted  

E-Print Network [OSTI]

502 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, VOL. 57, NO. 1, JANUARY 2008 Combined Guard Channel and Mobile-Assisted Handoff for Cellular Networks B. B. Madan, Member, IEEE, S. Dharmaraja, Senior Member, IEEE, and K. S. Trivedi, Fellow, IEEE Abstract--For cellular communication systems, mobility

Dharmaraja, S.

433

Abstract Efficiency issues of variable-capacitance micromotors are discussed in context of combined drive and motor  

E-Print Network [OSTI]

motors, electric drives, efficiency I. INTRODUCTION An active area of research for commercial of combined drive and motor interaction. It is shown that variable-capacitance motors ideally have nearly, the drive system consisting of both the motor and electronics is not ideal when considering different

Chapman, Patrick

434

Am J Transplant . Author manuscript Successful long-term outcome of the first combined heart and kidney  

E-Print Network [OSTI]

heart and kidney transplant in a patient with systemic Al amyloidosis Audard Vincent 1 * , Matignon heart and kidney transplantation not followed by autologous stem cell transplantation in a patient with no improvement of renal or heart function. The patient underwent combined heart and kidney transplantation

Paris-Sud XI, Université de

435

Combined SO{sub 2}/NO{sub x} reduction technology  

SciTech Connect (OSTI)

Enactment of the Clean Air Act Amendments and passage of state legislation leading to more stringent nitrogen oxides (NO{sub x}) regulations have fueled research and development efforts on technologies for the combined control of sulfur dioxide (SO{sub 2}) and NO{sub x}. The integrated removal of both SO{sub 2} and NO{sub x}, in a single system can offer significant advantages over the use of several separate processes, including such factors as reduced system complexity, better operability, and lower costs. This paper reviews the status of a number of integrated flue-gas-cleanup (FGC) systems that have reached a significant stage of development, focusing on post-combustion processes that have been tested or are ready for testing at the pilot scale or larger. A brief process description, a summary of the development status and performance achieved to date, pending commercialization issues, and process economics (when available) are given for each technology.

Livengood, C.D.; Huang, H.S. [Argonne National Lab., IL (United States); Markussen, J.M. [USDOE Pittsburgh Energy Technology Center, PA (United States)

1992-09-01T23:59:59.000Z

436

Combination and Integration of DPF-SCR Aftertreatment Technologies  

Broader source: Energy.gov (indexed) [DOE]

control systems Probe interaction of DPF-SCR couples to better understand the optimization of the coupled units Determine system limitations, define basic requirements for...

437

E-Print Network 3.0 - active filter system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

One of them is the use of a combined system of shunt passive filters and series... load power, reducing costs and increasing overall system efficiency 4. Series active...

438

Combined Scanning Transmission Electron Microscopy Tilt- and Focal Series  

SciTech Connect (OSTI)

In this study, a combined tilt- and focal series is proposed as a new recording scheme for high-angle annular dark-field scanning transmission electron microscopy (STEM) tomography. Three-dimensional (3D) data were acquired by mechanically tilting the specimen, and recording a through-focal series at each tilt direction. The sample was a whole-mount macrophage cell with embedded gold nanoparticles. The tilt focal algebraic reconstruction technique (TF-ART) is introduced as a new algorithm to reconstruct tomograms from such combined tilt- and focal series. The feasibility of TF-ART was demonstrated by 3D reconstruction of the experimental 3D data. The results were compared with a conventional STEM tilt series of a similar sample. The combined tilt- and focal series led to smaller missing wedge artifacts, and a higher axial resolution than obtained for the STEM tilt series, thus improving on one of the main issues of tilt series-based electron tomography.

Dahmen, Tim [German Research Center for Artificial Intelligence (DFKI), Germany] [German Research Center for Artificial Intelligence (DFKI), Germany; Baudoin, Jean-Pierre G [ORNL] [ORNL; Lupini, Andrew R [ORNL] [ORNL; Kubel, Christian [Karlsruhe Institute of Technology, Leopoldshafen, Germany] [Karlsruhe Institute of Technology, Leopoldshafen, Germany; Slusallek, Phillip [German Research Center for Artificial Intelligence (DFKI), Germany] [German Research Center for Artificial Intelligence (DFKI), Germany; De Jonge, Niels [ORNL] [ORNL

2014-01-01T23:59:59.000Z

439

INTEGRATED GASIFICATION COMBINED CYCLE PROJECT 2 MW FUEL CELL DEMONSTRATION  

SciTech Connect (OSTI)

With about 50% of power generation in the United States derived from coal and projections indicating that coal will continue to be the primary fuel for power generation in the next two decades, the Department of Energy (DOE) Clean Coal Technology Demonstration Program (CCTDP) has been conducted since 1985 to develop innovative, environmentally friendly processes for the world energy market place. The 2 MW Fuel Cell Demonstration was part of the Kentucky Pioneer Energy (KPE) Integrated Gasification Combined Cycle (IGCC) project selected by DOE under Round Five of the Clean Coal Technology Demonstration Program. The participant in the CCTDP V Project was Kentucky Pioneer Energy for the IGCC plant. FuelCell Energy, Inc. (FCE), under subcontract to KPE, was responsible for the design, construction and operation of the 2 MW fuel cell power plant. Duke Fluor Daniel provided engineering design and procurement support for the balance-of-plant skids. Colt Engineering Corporation provided engineering design, fabrication and procurement of the syngas processing skids. Jacobs Applied Technology provided the fabrication of the fuel cell module vessels. Wabash River Energy Ltd (WREL) provided the test site. The 2 MW fuel cell power plant utilizes FuelCell Energy's Direct Fuel Cell (DFC) technology, which is based on the internally reforming carbonate fuel cell. This plant is capable of operating on coal-derived syngas as well as natural gas. Prior testing (1992) of a subscale 20 kW carbonate fuel cell stack at the Louisiana Gasification Technology Inc. (LGTI) site using the Dow/Destec gasification plant indicated that operation on coal derived gas provided normal performance and stable operation. Duke Fluor Daniel and FuelCell Energy developed a commercial plant design for the 2 MW fuel cell. The plant was designed to be modular, factory assembled and truck shippable to the site. Five balance-of-plant skids incorporating fuel processing, anode gas oxidation, heat recovery, water treatment/instrument air, and power conditioning/controls were built and shipped to the site. The two fuel cell modules, each rated at 1 MW on natural gas, were fabricated by FuelCell Energy in its Torrington, CT manufacturing facility. The fuel cell modules were conditioned and tested at FuelCell Energy in Danbury and shipped to the site. Installation of the power plant and connection to all required utilities and syngas was completed. Pre-operation checkout of the entire power plant was conducted and the plant was ready to operate in July 2004. However, fuel gas (natural gas or syngas) was not available at the WREL site due to technical difficulties with the gasifier and other issues. The fuel cell power plant was therefore not operated, and subsequently removed by October of 2005. The WREL fuel cell site was restored to the satisfaction of WREL. FuelCell Energy continues to market carbonate fuel cells for natural gas and digester gas applications. A fuel cell/turbine hybrid is being developed and tested that provides higher efficiency with potential to reach the DOE goal of 60% HHV on coal gas. A system study was conducted for a 40 MW direct fuel cell/turbine hybrid (DFC/T) with potential for future coal gas applications. In addition, FCE is developing Solid Oxide Fuel Cell (SOFC) power plants with Versa Power Systems (VPS) as part of the Solid State Energy Conversion Alliance (SECA) program and has an on-going program for co-production of hydrogen. Future development in these technologies can lead to future coal gas fuel cell applications.

FuelCell Energy

2005-05-16T23:59:59.000Z

440

A combined Cyanex-923/HEH[EHP]/Dodecane solvent for recovery of transuranic elements from used nuclear fuel  

SciTech Connect (OSTI)

The separation of minor actinides from fission product lanthanides remains a primary challenge for enabling the recycle of used nuclear fuel. To minimize the complexity of materials handling, combining extractant processes has become an increasingly attractive option. Unfortunately, combined processes sometimes suffer reduced utility due to strong dipole-dipole interactions between the extractants. The results reported here describe a system based on a combination of commercially available extractants Cyanex-923 and HEH[EHP]. In contrast to other combined extractant systems, these extractant molecules exhibit comparatively weak interactions, reducing the impact of secondary interactions. In this process, mixtures containing equal ratios of Cyanex-923 and HEH[EHP] were seen to co-extract americium and the lanthanides from nitric acid solutions. Stripping of An(III) was effectively achieved through contact with an aqueous phase comprised of glycine (for pH control) and a polyamino-poly-carboxylate stripping reagent that selectively removes An(III) from the extractant phase. The lanthanides can then be stripped from the loaded organic phase contacting with high nitric acid concentrations. Extraction of fission products zirconium and molybdenum was also investigated and potential strategies for their management have been identified. The work presented demonstrates the feasibility of combining Cyanex-923 and HEH[EHP] for separating and recovering the transuranic elements from the Ln(III). (authors)

Johnson, A.; Nash, K.L. [Department of Chemistry, Washington State University, PO Box 644630, Pullman, WA 99164-4630 (United States)

2013-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

FET active notch antennas for quasi-optical power combining  

E-Print Network [OSTI]

different solid-state circuit structures can be used to create the active antenna elements used in quasi-optical power combining arrays A new type of active antenna which combines an FET oscillator with a notch antenna has been designed and tested... Oscillators C. Design and Performance of the FET Active Notch Antenna . . . . . D Injection Locking. . . Page ul tv jx 10 10 14 20 20 20 23 30 CHAPTER 1, Injection Locking to an External Power Source . . . . 2. Injection Locking the FET Active...

Leverich, William Kent

1993-01-01T23:59:59.000Z

442

Exotic hadron production in a quark combination model  

SciTech Connect (OSTI)

The philosophy on production of exotic hadrons (multiquark states) in the framework of the quark combination model is investigated, taking f{sub 0}(980) as an example. The production rate and p{sub T} spectra of f{sub 0}(980) considered as (ss) or (sqsq), respectively, are calculated and compared in Au+Au collisions at {radical}(s{sub NN})=200 GeV. The unitarity of various combination models, when open for exotic hadron production, is addressed.

Han Wei; Shao Fenglan [Department of Physics, Qufu Normal University, Qufu, 273165 (China); Li Shiyuan; Shang Yonghui; Yao Tao [Department of Physics, Shandong University, Jinan, 250100 (China)

2009-09-15T23:59:59.000Z

443

Parton distributions with the combined HERA charm production cross sections  

SciTech Connect (OSTI)

Heavy quark structure functions from HERA provide a direct handle on the medium and small-x gluon PDF. In this contribution, we discuss ongoing progress on the implementation of the FONLL General-Mass scheme with running heavy quark masses, and of its benchmarking with the HOPPET and OpenQCDrad codes, and then present the impact of the recently released combined HERA charm production cross sections in the NNPDF 2.3 analysis. We find that the combined charm data contribute to constraining the gluon and quarks at small values of Bjorken-x.

Bertone, Valerio [Physikalisches Institut, Albert-Ludwigs-Universitaet Freiburg, Hermann-Herder-Strasse 3, D-79104 Freiburg i. B (Germany); Rojo, Juan [PH Department, TH Unit, CERN, CH-1211 Geneva 23 (Switzerland)

2013-04-15T23:59:59.000Z

444

Sleeve reaction chamber system  

DOE Patents [OSTI]

A chemical reaction chamber system that combines devices such as doped polysilicon for heating, bulk silicon for convective cooling, and thermoelectric (TE) coolers to augment the heating and cooling rates of the reaction chamber or chambers. In addition the system includes non-silicon-based reaction chambers such as any high thermal conductivity material used in combination with a thermoelectric cooling mechanism (i.e., Peltier device). The heat contained in the thermally conductive part of the system can be used/reused to heat the device, thereby conserving energy and expediting the heating/cooling rates. The system combines a micromachined silicon reaction chamber, for example, with an additional module/device for augmented heating/cooling using the Peltier effect. This additional module is particularly useful in extreme environments (very hot or extremely cold) where augmented heating/cooling would be useful to speed up the thermal cycling rates. The chemical reaction chamber system has various applications for synthesis or processing of organic, inorganic, or biochemical reactions, including the polymerase chain reaction (PCR) and/or other DNA reactions, such as the ligase chain reaction.

Northrup, M. Allen (Berkeley, CA); Beeman, Barton V. (San Mateo, CA); Benett, William J. (Livermore, CA); Hadley, Dean R. (Manteca, CA); Landre, Phoebe (Livermore, CA); Lehew, Stacy L. (Livermore, CA); Krulevitch, Peter A. (Pleasanton, CA)

2009-08-25T23:59:59.000Z

445

State Opportunities for Action: Review of States' Combined Heat and Power Activities  

E-Print Network [OSTI]

. Greene, K. McConnack, 1. Li, and R.N. Elliott. 2001. Certification of Combined Heat and Power Systems: Establishing Emissions Standards. ACEEE-fE014. Washington, D.C.: American Council for an Energy-Efficient Economy. Smith, S. (New York Research... not listed in Table 2 fall into the category of "NUN": no state-level financial incentives (''N''); the utility ("U") regulates interconnections to the grid; and there are no state-level special emissions rules for CHP ("N"). e 1 S Resu ts I ~ Sta e A...

Brown, E.; Scott, K.; Elliott, R. N.

446

Combining Conjugate Direction Methods with Stochastic Approximation of Gradients  

E-Print Network [OSTI]

Combining Conjugate Direction Methods with Stochastic Approximation of Gradients #3; Nicol N-8092 Zurich, Switzerland http://www.icos.ethz.ch/ Abstract The method of conjugate directions provides from conjugate gra- dient in the stochastic (online) setting, us- ing fast Hessian-gradient products

Schraudolph, Nicol N.

447

Combining Conjugate Direction Methods with Stochastic Approximation of Gradients  

E-Print Network [OSTI]

Combining Conjugate Direction Methods with Stochastic Approximation of Gradients Nicol N-8092 Zšurich, Switzerland http://www.icos.ethz.ch/ Abstract The method of conjugate directions provides conjugate gra- dient in the stochastic (online) setting, us- ing fast Hessian-gradient products to set up

Schraudolph, Nicol N.

448

Forecast Combinations of Computational Intelligence and Linear Models for the  

E-Print Network [OSTI]

Forecast Combinations of Computational Intelligence and Linear Models for the NN5 Time Series Forecasting competition Robert R. Andrawis Dept Computer Engineering Cairo University, Giza, Egypt robertrezk@eg.ibm.com November 6, 2010 Abstract In this work we introduce a forecasting model with which we participated

Atiya, Amir

449

Corrosion Investigations at Masned Combined Heat and Power Plant  

E-Print Network [OSTI]

Corrosion Investigations at MasnedÞ Combined Heat and Power Plant Part VII Melanie Montgomery Ole Hede Larsen Elsam ­ FynsvÊrket FÊlleskemikerne December 2002. #12;CORROSION INVESTIGATIONS.................................................................................................... 6 3.1. Measured corrosion attack on the fireside

450

Combining building thermal simulation methods and LCA methods  

E-Print Network [OSTI]

amount of energy used for operating the building, combined with an increased use of renewable energy is that the increased requirements to the energy performance of buildings (as expressed in EU Directive 2002/91/EC), may for low-energy buildings, where a relatively large amount of resources is used during construction

Hansen, René Rydhof

451

Accurate Static Pose Estimation Combining Direct Regression and Geodesic Extrema  

E-Print Network [OSTI]

Accurate Static Pose Estimation Combining Direct Regression and Geodesic Extrema Brian Holt, Eng with the extraction of geodesic extrema to find extremities. We show how these approaches are complementary obtained by exploiting the geodesic structure supports accurate estimation of extremal points which cor

Bowden, Richard

452

ENG 4793: Composite Materials and Processes 1 Combining Thermoplastics with  

E-Print Network [OSTI]

1 ENG 4793: Composite Materials and Processes 1 Combining Thermoplastics with Reinforcing Fibers ver 1 ENG 4793: Composite Materials and Processes 2 Outline · Issues · Approaches ­ Short Fibers ­ Long Fibers ­ Continuous Fibers · Conclusions ENG 4793: Composite Materials and Processes 3 Issues

Colton, Jonathan S.

453

Orc-X: Combining Orchestrations and XQuery (work in progress)  

E-Print Network [OSTI]

Orc-X: Combining Orchestrations and XQuery (work in progress) Kristi Morton David Kitchin William en- force a tight coupling of state and behavior. We have previously presented Orc, a language that provides simple but powerful con- structs to orchestrate distributed computations. Previous versions of Orc

Cook, William R.

454

Combined Delta-Nabla Sum Operator in Discrete Fractional Calculus  

E-Print Network [OSTI]

We introduce a more general discrete fractional operator, given by convex linear combination of the delta and nabla fractional sums. Fundamental properties of the new fractional operator are proved. As particular cases, results on delta and nabla discrete fractional calculus are obtained.

Bastos, Nuno R O

2010-01-01T23:59:59.000Z

455

Combining Facebook and Open Learner Models to Encourage Collaborative Learning  

E-Print Network [OSTI]

Combining Facebook and Open Learner Models to Encourage Collaborative Learning Mohammad Alotaibi of a social network application (Facebook) with individual open learner models at university level, to support collaborative learning. Results suggest that Facebook and open learner models can be used together to support

Bull, Susan

456

Efficient Private File Retrieval by Combining ORAM and PIR  

E-Print Network [OSTI]

Efficient Private File Retrieval by Combining ORAM and PIR Travis Mayberry Erik-Oliver Blass Agnes ORAMs which have worst-case communication complexity linear in their capacity and block size. PIR on the server. This paper presents Path-PIR, a hybrid ORAM construction, using techniques from PIR

457

EIS-0409: Kemper County Integrated Gasification Combined Cycle Project, Mississippi  

Broader source: Energy.gov [DOE]

This EIS analyzes DOE's decision to provide funding for the Kemper County Integrated Gasification Combined Cycle Project in Kemper County, Mississippi to assess the potential environmental impacts associated with the construction and operation of a project proposed by Southern Power Company, through its affiliate Mississippi Power Company, which has been selected by DOE for consideration under the Clean Coal Power Initiative (CCPI) program.

458

A framework for combining social impact assessment and risk assessment  

SciTech Connect (OSTI)

An increasing focus on integrative approaches is one of the current trends in impact assessment. There is potential to combine impact assessment with various other forms of assessment, such as risk assessment, to make impact assessment and the management of social risks more effective. We identify the common features of social impact assessment (SIA) and social risk assessment (SRA), and discuss the merits of a combined approach. A hybrid model combining SIA and SRA to form a new approach called, ‘risk and social impact assessment’ (RSIA) is introduced. RSIA expands the capacity of SIA to evaluate and manage the social impacts of risky projects such as nuclear energy as well as natural hazards and disasters such as droughts and floods. We outline the three stages of RSIA, namely: impact identification, impact assessment, and impact management. -- Highlights: • A hybrid model to combine SIA and SRA namely RSIA is proposed. • RSIA can provide the proper mechanism to assess social impacts of natural hazards. • RSIA can play the role of ex-post as well as ex-ante assessment. • For some complicated and sensitive cases like nuclear energy, conducting a RSIA is necessary.

Mahmoudi, Hossein, E-mail: mahmoudi@uni-hohenheim.de [Department of Social Sciences in Agriculture, University of Hohenheim (Germany) [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Environmental Sciences Research Institute, Shahid Beheshti University, G.C. (Iran, Islamic Republic of); Renn, Ortwin [Department of Technology and Environmental Sociology (and DIALOGIK), University of Stuttgart (Germany)] [Department of Technology and Environmental Sociology (and DIALOGIK), University of Stuttgart (Germany); Vanclay, Frank [Department of Cultural Geography, Faculty of Spatial Sciences, University of Groningen, Groningen (Netherlands)] [Department of Cultural Geography, Faculty of Spatial Sciences, University of Groningen, Groningen (Netherlands); Hoffmann, Volker [Department of Social Sciences in Agriculture, University of Hohenheim (Germany)] [Department of Social Sciences in Agriculture, University of Hohenheim (Germany); Karami, Ezatollah [College of Agriculture, Shiraz University, Shiraz (Iran, Islamic Republic of)] [College of Agriculture, Shiraz University, Shiraz (Iran, Islamic Republic of)

2013-11-15T23:59:59.000Z

459

COMBINATION OF BRAIN CONFORMAL MAPPING AND LANDMARKS: A VARIATIONAL APPROACH  

E-Print Network [OSTI]

COMBINATION OF BRAIN CONFORMAL MAPPING AND LANDMARKS: A VARIATIONAL APPROACH Yalin Wang Mathematics brain data, data from multiple subjects are typically mapped into a canonical space. One method to do be mapped conformally to a sphere. Since the cortical surface of the brain is a genus zero surface, con

Wang, Yalin

460

A PVDF SENSOR FOR MONITORING GRAIN LOSS IN COMBINE HARVESTER  

E-Print Network [OSTI]

Laboratory of Modern Agricultural Equipment and Technology, Ministry of Education & Jiangsu Province, Jiangsu University, P.R.China,212013 * Corresponding author, Address: Key Laboratory of Modern Agricultural Equipment the intelligent automatic control in combine harvester. Polyvinylidene fluoride piezoelectricity film has been one

Boyer, Edmond

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Combined Honours BA Digital Journalism and Communication, Media, and Film  

E-Print Network [OSTI]

Combined Honours BA Digital Journalism and Communication, Media, and Film Are you looking in Digital Journalism (DJ) and Communication, Media, and Film (CMF) is for you. That's because our DJ Honours BA Digital Journalism and Communication, Media, and Film We look forward to meeting you! Student

462

Encouraging Combined Heat and Power in California Buildings  

E-Print Network [OSTI]

LBNL-6267E Encouraging Combined Heat and Power in California Buildings Michael Stadler, Markus in California Buildings Michael Stadler, Markus Groissböck, Gonçalo Cardoso, Andreas MĂŒller, Judy Lai Lawrence. Reference herein to any specific commercial product, process, or service by its trade name, trademark

463

Optimal combination of data verification and materials accountancy  

SciTech Connect (OSTI)

Materials accountancy accompanied by data verification is one of the main elements in international safeguards of nuclear material. In this paper statistical combinations of materials accountancy and data verification are discussed with the boundary condition of a fixed total false-alarm probability.

Beedgen, R.; Hafer, J.F.

1982-01-01T23:59:59.000Z

464

Waste Management in Dsseldorf Combination of separate collection,  

E-Print Network [OSTI]

Waste Management in DĂŒsseldorf Combination of separate collection, recycling and waste-to-energy Biowaste Garden waste Light packaging Paper Glass Wood from bulky waste Bulky waste Rest / mixed waste Bio- Garden- Paper Glass Light Metals Wood Bulky Rest waste waste Card- Pack. waste board Saved CO2

Columbia University

465

biomedical (BME) The interdisciplinary field of Biomedical Engineering combines elements  

E-Print Network [OSTI]

32 biomedical (BME) The interdisciplinary field of Biomedical Engineering combines elements to apply advanced technology to the complex problems of medical care. The Biomedical Engineering program of Engineering, pre-med BME's have access to the University's Pre-Health advisement office. Biomedical

Rohs, Remo

466

1Now at Space Sciences Laboratory, University of California, Berkeley, California  

E-Print Network [OSTI]

energy coupling efficiency, defined as the ratio of energy dissipated in the MI system to the total breakup with the subsequent global expan- sion of the auroral oval. The main part of the energy need- ed of energy from the Sun carried by the solar wind is transferred, stored and distrib- uted

Ă?stgaard, Nikolai

467

Distributed Power Generation: Requirements and Recommendations for an ICT Architecture  

E-Print Network [OSTI]

. Some of these are sustainable (wind and hydroelectric power plants, solar cells), some are controllable), distrib- uted generation, energy management systems (EMS) , IEC standards 1 Power Generation possible to generate energy efficiently in large-scale power plants, a complex infrastructure is needed

Appelrath, Hans-Jürgen

468

GREENHOUSE GAS REDUCTION POTENTIAL WITH COMBINED HEAT AND POWER WITH DISTRIBUTED GENERATION PRIME MOVERS - ASME 2012  

SciTech Connect (OSTI)

Pending or recently enacted greenhouse gas regulations and mandates are leading to the need for current and feasible GHG reduction solutions including combined heat and power (CHP). Distributed generation using advanced reciprocating engines, gas turbines, microturbines and fuel cells has been shown to reduce greenhouse gases (GHG) compared to the U.S. electrical generation mix due to the use of natural gas and high electrical generation efficiencies of these prime movers. Many of these prime movers are also well suited for use in CHP systems which recover heat generated during combustion or energy conversion. CHP increases the total efficiency of the prime mover by recovering waste heat for generating electricity, replacing process steam, hot water for buildings or even cooling via absorption chilling. The increased efficiency of CHP systems further reduces GHG emissions compared to systems which do not recover waste thermal energy. Current GHG mandates within the U.S Federal sector and looming GHG legislation for states puts an emphasis on understanding the GHG reduction potential of such systems. This study compares the GHG savings from various state-of-the- art prime movers. GHG reductions from commercially available prime movers in the 1-5 MW class including, various industrial fuel cells, large and small gas turbines, micro turbines and reciprocating gas engines with and without CHP are compared to centralized electricity generation including the U.S. mix and the best available technology with natural gas combined cycle power plants. The findings show significant GHG saving potential with the use of CHP. Also provided is an exploration of the accounting methodology for GHG reductions with CHP and the sensitivity of such analyses to electrical generation efficiency, emissions factors and most importantly recoverable heat and thermal recovery efficiency from the CHP system.

Curran, Scott [ORNL; Theiss, Timothy J [ORNL; Bunce, Michael [ORNL

2012-01-01T23:59:59.000Z

469

COMBINING NEUTRAL AND ACIDIC EXTRACTANTS FOR RECOVERING TRANSURANIC ELEMENTS FROM NUCLEAR FUEL  

SciTech Connect (OSTI)

We have been investigating a solvent extraction system that combines a neutral extractant--octyl(phenyl)-N,N-diisobutyl-carbamoylmethylphosphine oxide (CMPO)--with an acidic extractant--bis(2-ethylhexyl)phosphoric acid (HDEHP)--to form a single process solvent for separating Am and Cm from the other components of irradiated nuclear fuel. It was originally hypothesized that the extraction chemistry of CMPO would dominate under conditions of high acidity (> 1 M HNO3), resulting in co-extraction of the transuranic and lanthanide elements into the organic phase. Contacting the loaded solvent with a solution of diethylenetriaminepentaacetate (DTPA) buffered with lactic or citric acid at pH {approx}3 to 4 would result in a condition in which the HDEHP chemistry dominates. Although the data somewhat support this hypothesis, it is clear that there are interactions between the two extractants such that they do not act independently in the extraction and stripping regimes. We report here studies directed at determining the nature and extent of interaction between CMPO and HDEHP, the synergistic behavior of CMPO and HDEHP in the extraction of americium and neodymium, and progress towards determining the thermodynamics of this extraction system. Neodymium and americium behave similarly in the combined solvent system, with a significant synergy between CMPO and HDEHP in the extraction of both of these trivalent elements from lactate-buffered DTPA solutions. In contrast, a much weaker synergistic behaviour is observed for europium. Thus, investigations into the fundamental chemistry involved in this system have focused on the neodymium extraction. The extraction of neodymium has been systematically investigated, individually varying the HDEHP concentration, the CMPO concentration, or the aqueous phase composition. Thermodynamic modeling of the neodymium extraction system has been initiated. Interactions between CMPO and HDEHP in the organic phase must be taken into account in the thermodynamic modeling; such interactions have been quantified by nuclear magnetic resonance measurements.

Lumetta, Gregg J.; Neiner, Doinita; Sinkov, Sergey I.; Carter, Jennifer C.; Braley, Jenifer C.; Latesky, Stanley; Gelis, Artem V.; Tkac, Peter; Vandegrift, George F.

2011-10-03T23:59:59.000Z

470

Systems Engineering  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Systems Engineering Systems Engineering is a holistic engineering discipline that provides systems analysis, systems integration, decision analysis, and systems science products...

471

Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture Systems ~ Wildlife Using Combined Snowpack and  

E-Print Network [OSTI]

Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture, BCMOF 1 Research Disciplines: Ecology ~ Geology ~ Geomorphology ~ Hydrology ~ Pedology ~ Silviculture

472

Removal of ammonia from contaminated air in a biotrickling filter Denitrifying bioreactor combination system  

E-Print Network [OSTI]

rights reserved. 1. Introduction Ammonia emissions are very common in operations such as composting to conventional treatment which has been shown to be efficient and cost effective in a number of cases (Devinny et

473

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

A Better Steam Engine: Designing a Distributed Concentrating2011 Abstract A Better Steam Engine: Designing a Distributedprovided for a steam Rankine cycle heat engine achieving 50%

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

474

1?10 kW Stationary Combined Heat and Power Systems Status and...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Independent Review Published for the U.S. Department of Energy Hydrogen and Fuel Cells Program NRELBK-6A10-48265 November 2010 NOTICE This report was prepared as an...

475

Ultra Efficient Combined Heat, Hydrogen, and Power System- Fact Sheet, 2011  

Broader source: Energy.gov [DOE]

Fact sheet overviewing project that will utilize reducing gas from a high-temperature fuel cell to directly replace hydrogen and nitrogen used in a metal treating process

476

Systems level characterizations of single and combination drug mechanisms of action in vitro and in vivo  

E-Print Network [OSTI]

Small molecule characterization is a critical limiting step in cancer drug development. At the present time, high throughput screens of natural products and combinatorial synthesis libraries generate more pharmaceutical ...

Pritchard, Justin (Justin Robert)

2012-01-01T23:59:59.000Z

477

Review of Hypothesis Alignment Algorithms for MT System Combination via Confusion Network Decoding  

E-Print Network [OSTI]

,ney}@cs.rwth-aachen.de f Raytheon BBN Technologies, 10 Moulton Street, Cambridge, MA 02138 {smatsouk. The work reported in this paper was carried out while the authors were at Raytheon BBN Technologies

478

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

13]) (b) Thermal vs. electrical energy demands: FS is freezevs. latitude axis. The data plotted indicates the expected relative electrical

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

479

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

have lower operational costs per kWh produced. There is alsoper kWh of energy, the energy payback time (EPBT), the cost

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

480

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

12] Kalogirou, S. A. (2004). Solar thermal collectors andD. (2004). Advances in solar thermal electricity technology.December). Distributed solar-thermal/electric generation.

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "uted system combin" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

photovoltaics (PV) – which is often used as the benchmark in terms of efficiency,photovoltaics because of the high cost of photovoltaic electricity. • Improved energy efficiencyPhotovoltaics are functional in a much wider range of environments, however the scarcity of required materials, lower efficiencies,

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

482

Selection and Specification of Combined Heat and Power System for a Carbon Black Manufacturer  

E-Print Network [OSTI]

operating costs, which in the long run can contribute to their growth and to the ultimate goal of remaining competitive in the business world. REFERENCES [1] Kozman, T.. Introductory Presentation for Report LL024X. Franklin, LA. Apr 2006. Industrial... online at http://www1.eere.energy.gov/industry/bestprac tices/pdfs/guide_chp_boiler.pdf (accessed 2006). [3] Midwest CHP Application Center, http://www.chpcentermw.org/home.html, (accessed 2006). [4] Distributed Energy Program: Grid Interconnection...

Kozman, T. A.; DaCosta, J.; Lee, J.

2007-01-01T23:59:59.000Z

483

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

the photo-electric effect for direct conversion of light tothe photo-electric effect for direct conversion of light to

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

484

Optimal Combination of Distributed Energy System in an Eco-Campus of Japan  

E-Print Network [OSTI]

customer. 2) .The primary energy consumption and carbon e mo w s the annual primary energy consumption in e a c h c a se . T h e primary energy consumption of c a s e l is larger

Yang, Yongwen; Gao, Weijun; Zhou, Nan; Marnay, Chris

2006-01-01T23:59:59.000Z

485

TWO WELL STORAGE SYSTEMS FOR COMBINED HEATING AND AIRCONDITIONING BY GROUNDWATER HEATPUMPS IN SHALLOW AQUIFERS  

E-Print Network [OSTI]

In warmer climates air source heat pumps have gained widestadvantages over air source heat pumps. For example, theair conditioning is required, water is pumped from the cold water well to the heat pump.

Pelka, Walter

2010-01-01T23:59:59.000Z

486

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

M. (2006). Dynamic life cycle assessment (LCA) of renewableutilize methods for life-cycle assessment (LCA) of emergingPerforming a life cycle assessment (LCA) is a useful way of

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

487

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

Solar Rankine thermodynamics matches Californiaconsidered, using average California solar insolation dataelectricity. Solar Rankine thermodynamics matches California

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

488

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

power to local residences or businesses. Although it may seem that the decreased efficiency of solar-

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

489

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

working fluid to power a remote heat engine, as the fluidCHP options. Having a remote heat engine has many advantages

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

490

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

and decreased cost of heat and electricity grid (Casten andgrid. Chapter 1 begins with analysis of the relative demand for electricity and heatheat can be cost-effectively stored with available technologies. (c) DCS-CHP thus can ameliorate grid-

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

491

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

towers have also been well explored, notably by BrightSource, Solarsolar concentrator, a hybrid balancing the pros and cons of traditional dish and power-tower

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

492

TWO WELL STORAGE SYSTEMS FOR COMBINED HEATING AND AIRCONDITIONING BY GROUNDWATER HEATPUMPS IN SHALLOW AQUIFERS  

E-Print Network [OSTI]

In warmer climates air source heat pumps have gained widestadvantages over air source heat pumps. For example, theair source equipment is much less. The source for this kind of heat pump

Pelka, Walter

2010-01-01T23:59:59.000Z

493

ASSESSMENT OF COMBINED HEAT AND POWER SYSTEM "PREMIUM POWER" APPLICATIONS IN CALIFORNIA  

E-Print Network [OSTI]

through capability of CHP equipment. Thomson Technology,Germany, 2008. Pacific Region CHP Application Center, EnergyMarnay ^ * Pacific Region CHP Application Center ^ Lawrence

Norwood, Zack

2010-01-01T23:59:59.000Z

494

Optimal Combination of Distributed Energy System in an Eco-Campus of Japan  

E-Print Network [OSTI]

Reduction Pay Back Year Year Do-Nothing DER with CHP PV+(DER with CHP) GA-K-500 CHPMT--C-60*2 CHPGA-K-150 PAFC-200 FC+(DER with CHP) GA-K-500 CHPMT- -C- 60 CHPGA-

Yang, Yongwen; Gao, Weijun; Zhou, Nan; Marnay, Chris

2006-01-01T23:59:59.000Z

495

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

by Excel Engineering) software calculates fluid properties.accommodate multiple fluids. Engineering Equation Solver orfluid as shown in figure 3.11 is calculated from these measured temperature and pressure values using the Engineering

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

496

A Better Steam Engine: Designing a Distributed Concentrating Solar Combined Heat and Power System  

E-Print Network [OSTI]

of the rejected waste heat from power generation. (c)and for use of the waste heat, a condenser is muchcycle ? t Fraction of waste heat recovered from Rankine

Norwood, Zachary Mills

2011-01-01T23:59:59.000Z

497

Combining Methods for the Livelock Analysis of a FaultTolerant System  

E-Print Network [OSTI]

­Benz Aerospace for the International Space Station ISS and focussd essentially on deadlock and livelock analysis. The approach is based on CSP specifications and the model­checking tool FDR. The tasks are split into manageable subtasks by applying abstraction techniques for restricting the specifications to the essential

Peleska, Jan - Fachbereich 3

498

Fuel-Flexible Microturbine and Gasifier System for Combined Heat and Power  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of EnergyEnergyENERGY TAX POLICIES7.pdfFuel Cell Vehicle Basics Fuel Cell Vehicle BasicsValentineson the|

499

Combination of Diesel fuel system architectures and Ceria-based fuel-borne  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartmentTieCelebrate Earth Codes andDepartment of Energy 0 DOE

500

Novel Sorbent to Clean Biogas for Fuel Cell Combined Heat and Power Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:Year in3.pdfEnergyDepartment of Energy Advanced1, 2014 EIS-0474: EPADepartmentGökhan O.