National Library of Energy BETA

Sample records for user interface spreadsheet

  1. CalTOX (registered trademark), A multimedia total exposure model spreadsheet user's guide. Version 4.0(Beta)

    SciTech Connect (OSTI)

    McKone, T.E.; Enoch, K.G.

    2002-08-01

    CalTOX has been developed as a set of spreadsheet models and spreadsheet data sets to assist in assessing human exposures from continuous releases to multiple environmental media, i.e. air, soil, and water. It has also been used for waste classification and for setting soil clean-up levels at uncontrolled hazardous wastes sites. The modeling components of CalTOX include a multimedia transport and transformation model, multi-pathway exposure scenario models, and add-ins to quantify and evaluate uncertainty and variability. All parameter values used as inputs to CalTOX are distributions, described in terms of mean values and a coefficient of variation, rather than as point estimates or plausible upper values such as most other models employ. This probabilistic approach allows both sensitivity and uncertainty analyses to be directly incorporated into the model operation. This manual provides CalTOX users with a brief overview of the CalTOX spreadsheet model and provides instructions for using the spreadsheet to make deterministic and probabilistic calculations of source-dose-risk relationships.

  2. User interface for a tele-operated robotic hand system

    SciTech Connect (OSTI)

    Crawford, Anthony L

    2015-03-24

    Disclosed here is a user interface for a robotic hand. The user interface anchors a user's palm in a relatively stationary position and determines various angles of interest necessary for a user's finger to achieve a specific fingertip location. The user interface additionally conducts a calibration procedure to determine the user's applicable physiological dimensions. The user interface uses the applicable physiological dimensions and the specific fingertip location, and treats the user's finger as a two link three degree-of-freedom serial linkage in order to determine the angles of interest. The user interface communicates the angles of interest to a gripping-type end effector which closely mimics the range of motion and proportions of a human hand. The user interface requires minimal contact with the operator and provides distinct advantages in terms of available dexterity, work space flexibility, and adaptability to different users.

  3. User Interface Program for secure electronic tags

    SciTech Connect (OSTI)

    Cai, Y.; Koehl, E.R.; Carlson, R.D.; Raptis, A.C.

    1995-05-01

    This report summarizes and documents the efforts of Argonne National Laboratory (ANL) in developing a secure tag communication user interface program comprising a tag monitor and a communication tool. This program can perform the same functions as the software that was developed at the Lawrence Livermore National Laboratory (LLNL), but it is enhanced with a user-friendly screen. It represents the first step in updating the TRANSCOM Tracking System (TRANSCOM) by incorporating a tag communication screen menu into the main menu of the TRANSCOM user program. A working version of TRANSCOM, enhanced with ANL secure-tag graphics, will strongly support the Department of Energy Warhead Dismantlement/Special Nuclear Materials Control initiatives. It will allow commercial satellite tracking of the movements and operational activities of treaty-limited items and transportation vehicles throughout Europe and the former USSR, as well as the continental US.

  4. Dead Reckoning Pedometer Graphical User Interface

    Energy Science and Technology Software Center (OSTI)

    2003-04-26

    The Dead Reckoning Pedometer Graphical User Interface (DRP GUI) software is tasked with maturing the technology described in a WSRC patent application. This patent application describes an electronic navigation system that records human foot movements, in three dimensions, for the purpose of determining position, distance, and speed of a walking person. The simiplest form of the apparatus consists of a magnetometer (an instrument that measures magnetic field strength) on one foot and a small permanentmore » magnet on another foot with pressure sensors on each foot. When a person takes a step, the foot will hit the ground and produce a signal on the pressure sensor. This will trigger a reading of the magnetometer so that the relative position of one foot to the other can be calculated. This same process is repeated for each step. The DRP could be very useful for tracking emergency personnel such as firemen, policemen, and paramedics when they travel within a building. Technologies such as global positioning systems to not work within buildings. The goal of the DRP GUI V1.0.0 software is to provide a three-dimensional graphical user interface that will allow WSRC to demonstrate the DRP concepts to potential patent licensees. It is hoped that a partnership will allow WSRC and another company to further develop the DRP technology and software into a commercial product.« less

  5. EnergyPlus Graphical User Interface

    Energy Science and Technology Software Center (OSTI)

    2011-01-04

    LBNL, Infosys Technologies and Digital Alchemy are developing a free, comprehensive graphical user interface (GUI) that will enable EnergyPlus to be used more easily and effectively by building designers and other professionals, facilitating its widespread adoption. User requirements have been defined through a series of practitioner workshops. A new schematic editor for HVAC systems will be combined with different building envelope geometry generation tools and IFC-based BIM import and export. LBNL and Digital Alchemy havemore » generated a detailed function requirements specification, which is being implemented in software by Infosys, LBNL and and Digital Alchemy. LBNL and practitioner subcontractors will develop a comprehensive set of templates and libraries and will perform extensive testing of the GUI before it is released in Q3 2011. It is planned to use an Open Platfom approach, in which a comprehensive set of well documented Application Programming Interfaces (API's) would be provided to facilitate both the development of third party contributions to the official, standard GUI and the development of derivative works.« less

  6. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-based Incentives in the United States. User Manual Version 1

    SciTech Connect (OSTI)

    Gifford, Jason S.; Grace, Robert C.

    2011-03-01

    This user manual helps model users understands how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. It reviews the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. It also provides instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction’s policymaking objectives and context. And, it describes the results and outlines how these results may inform decisions about long-term renewable energy support programs.

  7. USER INTERFACE FOR A TELE-OPERATED ROBOTIC HAND SYSTEM - Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This Technology Technology Marketing Summary A user interface for the teleoperation of a robotic hand. The user interface conducts a calibration procedure to determine a user's...

  8. Facility Interface Capability Assessment (FICA) user manual

    SciTech Connect (OSTI)

    Pope, R.B.; MacDonald, R.R.; Massaglia, J.L.; Williamson, D.A.; Viebrock, J.M.; Mote, N.

    1995-09-01

    The US Department of Energy`s (DOE) Office of Civilian Radioactive Waste Management (OCRWM) is responsible for developing the Civilian Radioactive Waste Management System (CRWMS) to accept spent nuclear fuel from commercial facilities. The objective of the Facility Interface Capability Assessment (FICA) project was to assess the capability of each commercial spent nuclear fuel (SNF) storage facility, at which SNF is stored, to handle various SNF shipping casks. The purpose of this report is describe the FICA computer software and to provide the FICA user with a guide on how to use the FICA system. The FICA computer software consists of two executable programs: the FICA Reactor Report program and the FICA Summary Report program (written in the Ca-Clipper version 5.2 development system). The complete FICA software system is contained on either a 3.5 in. (double density) or a 5.25 in. (high density) diskette and consists of the two FICA programs and all the database files (generated using dBASE III). The FICA programs are provided as ``stand alone`` systems and neither the Ca-Clipper compiler nor dBASE III is required to run the FICA programs. The steps for installing the FICA software system and executing the FICA programs are described in this report. Instructions are given on how to install the FICA software system onto the hard drive of the PC and how to execute the FICA programs from the FICA subdirectory on the hard drive. Both FICA programs are menu driven with the up-arrow and down-arrow keys used to move the cursor to the desired selection.

  9. Dose Calculation Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1997-06-10

    VENTSAR XL is an EXCEL Spreadsheet that can be used to calculate downwind doses as a result of a hypothetical atmospheric release. Both building effects and plume rise may be considered. VENTSAR XL will run using any version of Microsoft EXCEL version 4.0 or later. Macros (the programming language of EXCEL) was used to automate the calculations. The user enters a minimal amount of input and the code calculates the resulting concentrations and doses atmore » various downwind distances as specified by the user.« less

  10. Designing a user-system interface

    SciTech Connect (OSTI)

    Pfuderer, H.A.; Miller, K.C.

    1989-01-01

    Our team at the Oak Ridge National Laboratory (ORNL) has been successful in guiding managers of government organizations in planning and implementing successful strategic information systems. The essence of the ORNL methodology is to provide users at all levels in the organization many opportunities to participate in systems development. This user involvement included: incorporating their own critical success factors into the planning process; defining the business objectives, processes, and needed systems implementation in a team approach; and providing down-to-earth, usability feedback in prototyping the most strategic systems. 2 figs.

  11. CREST Cost of Renewable Energy Spreadsheet Tool: A Model for Developing Cost-Based Incentives in the United States; User Manual Version 4, August 2009 - March 2011 (Updated July 2013)

    SciTech Connect (OSTI)

    Gifford, J. S.; Grace, R. C.

    2013-07-01

    The objective of this document is to help model users understand how to use the CREST model to support renewable energy incentives, FITs, and other renewable energy rate-setting processes. This user manual will walk the reader through the spreadsheet tool, including its layout and conventions, offering context on how and why it was created. This user manual will also provide instructions on how to populate the model with inputs that are appropriate for a specific jurisdiction's policymaking objectives and context. Finally, the user manual will describe the results and outline how these results may inform decisions about long-term renewable energy support programs.

  12. Open Source Impacts of REDD Incentives Spreadsheet (OSIRIS) ...

    Open Energy Info (EERE)

    platform is recognizable to - and can be downloaded by - almost everyone. It's a Microsoft Excel spreadsheet. A user can define any of the values used to calculate REDD...

  13. Building America Analysis Spreadsheets

    Broader source: Energy.gov [DOE]

    The Building America Analysis Spreadsheets are companions to the House Simulation Protocols, and can assist with many of the calculations and look-up tables found in the report. The spreadsheets...

  14. Graphical User Interface Color Display Animation Interaction Tool

    Energy Science and Technology Software Center (OSTI)

    1999-10-05

    The Nuclear Plant Analyzer (NPA) is a highly flexible graphical user interface for displaying the results of a calculation, typically generated by RELAP5 or other code. This display consists of one or more picture, called masks, that mimic the host code input. This mask can be animated to display user-specified code output information mapped as colors, dials, moving arrows, etc., on the mask. The user can also interact with the control systems of the hostmore » input file as the execution progresses, thereby controlling aspects of the calculation. The Computer Visual System (CVS) creates, edits, and animates the the masks for use in the NPA.« less

  15. Graphical user interface for image acquisition and processing

    DOE Patents [OSTI]

    Goldberg, Kenneth A.

    2002-01-01

    An event-driven GUI-based image acquisition interface for the IDL programming environment designed for CCD camera control and image acquisition directly into the IDL environment where image manipulation and data analysis can be performed, and a toolbox of real-time analysis applications. Running the image acquisition hardware directly from IDL removes the necessity of first saving images in one program and then importing the data into IDL for analysis in a second step. Bringing the data directly into IDL creates an opportunity for the implementation of IDL image processing and display functions in real-time. program allows control over the available charge coupled device (CCD) detector parameters, data acquisition, file saving and loading, and image manipulation and processing, all from within IDL. The program is built using IDL's widget libraries to control the on-screen display and user interface.

  16. Field Deployable Tritium Assay System Host Graphical User Interface Software

    Energy Science and Technology Software Center (OSTI)

    1998-05-12

    The FDTASHOST software is a Graphical User Interface for the Field Deployable Tritium Assay System (FDTAS - Invention Disclosure SRS-96-09-091 has been submitted). The program runs on the Host computer which is located in the Laboratory and connected to the FDTAS remote field system via a modem over a phone line. The operator receives status information and messages from the Remote system. The operator can enter in commands to be executed by the remote systemmore » using the mouse and a pull down menu.« less

  17. Development of output user interface software to support analysis

    SciTech Connect (OSTI)

    Wahanani, Nursinta Adi Natsir, Khairina Hartini, Entin

    2014-09-30

    Data processing software packages such as VSOP and MCNPX are softwares that has been scientifically proven and complete. The result of VSOP and MCNPX are huge and complex text files. In the analyze process, user need additional processing like Microsoft Excel to show informative result. This research develop an user interface software for output of VSOP and MCNPX. VSOP program output is used to support neutronic analysis and MCNPX program output is used to support burn-up analysis. Software development using iterative development methods which allow for revision and addition of features according to user needs. Processing time with this software 500 times faster than with conventional methods using Microsoft Excel. PYTHON is used as a programming language, because Python is available for all major operating systems: Windows, Linux/Unix, OS/2, Mac, Amiga, among others. Values that support neutronic analysis are k-eff, burn-up and mass Pu{sup 239} and Pu{sup 241}. Burn-up analysis used the mass inventory values of actinide (Thorium, Plutonium, Neptunium and Uranium). Values are visualized in graphical shape to support analysis.

  18. The HOTBOX: A Visual User Interface to Medical Data

    SciTech Connect (OSTI)

    Ward, Richard C; Pouchard, Line Catherine; Beckerman, Barbara G; Dickson, Stewart

    2006-01-01

    The Defense Advanced Research Projects Agency (DARPA) Virtual Soldier (VS) Project recently investigated methods to predict outcomes from penetrating wounds based on comparison of complex mathematical models and clinical data including baseline X-ray computed tomography (CT) and post wound imaging. A need of the project was to correlate three-dimensional (3D) anatomy to extensive information, including pathophysiology of the wounded soldier, using the 3D anatomical geometry as an interface. To address this need, Oak Ridge National Laboratory (ORNL) developed the HotBox, a user interface (UI) that links a given point in space (a voxel) to the structural knowledge ontology describing the anatomy at that location. In addition, the HotBox links the location to the individual's physiological state (vital signs) and a description of the wound. The implementation and use of the HotBox is explained and the implications for the future of medical records, pre-surgical planning, image-guided surgery, and post-surgical treatment and rehabilitation are discussed.

  19. Project Cost Profile Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Project Cost Profile Spreadsheet Project Cost Profile Spreadsheet File Project Cost Profile Spreadsheet.xlsx More Documents & Publications Statement of Work (SOW) Template ...

  20. IRP Budget Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IRP Budget Spreadsheet IRP Budget Spreadsheet Blank budget spreadsheet for the Intergrated Research Project. IRPBudgetspreadsheet021711.xls (61.5 KB) More Documents & ...

  1. Managing Financing Programs- Spreadsheet Models

    Broader source: Energy.gov [DOE]

    This webinar, held on Jan. 24, 2011, provides a tutorial for managing financing programs through excel spreadsheets.

  2. LADTAPXL Aqueous Dose Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1999-08-10

    LADTAPXL is an EXCEL spreadsheet model of the NRC computer code LADTAP. LADTAPXL calculates maximally exposed individual and population doses from chronic liquid releases. Environmental pathways include external exposure resulting from recreational activities on the Savannah River and ingestion of water, fish, and invertebrates of Savannah River origin.

  3. Simergy: Practitioner-Oriented Graphical User Interface for EnergyPlus -

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Innovation Portal Energy Analysis Energy Analysis Building Energy Efficiency Building Energy Efficiency Find More Like This Return to Search Simergy: Practitioner-Oriented Graphical User Interface for EnergyPlus Lawrence Berkeley National Laboratory Contact LBL About This Technology Technology Marketing Summary Simergy is a graphical user interface (GUI) for the DOE building energy simulation program EnergyPlus for modeling building heating, cooling, lighting, ventilation and other

  4. Hot Oiling Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    1993-10-22

    One of the most common oil-field treatments is hot oiling to remove paraffin from wells. Even though the practice is common, the thermal effectiveness of the process is not commonly understood. In order for producers to easily understand the thermodynamics of hot oiling, a simple tool is needed for estimating downhole temperatures. Such a tool has been developed that can be distributed as a compiled spreadsheet.

  5. ASHRAE Standard 152 Spreadsheet

    Broader source: Energy.gov [DOE]

    ASHRAE Standard 152 quantifies the delivery efficiency of duct systems, based on factors including location, leakage, and insulation of ductwork. This spreadsheet tool developed by Lawrence Berkeley National Laboratory (LBNL) and modified by the National Renewable Energy Laboratory, assists with the calculation of seasonal distribution system efficiency, This calculation is required by the House Simulation Protocols when the simulation tool being used does not permit detailed duct modeling.

  6. The high level programmer and user interface of the NSLS control system

    SciTech Connect (OSTI)

    Tang, Y.N.; Smith, J.D.; Sathe, S.

    1993-07-01

    This paper presents the major components of the high level software in the NSLS upgraded control system. Both programmer and user interfaces are discussed. The use of the high-speed work stations, fast network communications, UNIX system, X-window and Motif have greatly changed and improved these interfaces.

  7. Value of Information spreadsheet

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Jlusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  8. Value of Information spreadsheet

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Trainor-Guitton, Whitney

    2014-05-12

    This spreadsheet represents the information posteriors derived from synthetic data of magnetotellurics (MT). These were used to calculate value of information of MT for geothermal exploration. Information posteriors describe how well MT was able to locate the "throat" of clay caps, which are indicative of hidden geothermal resources. This data is full explained in the peer-reviewed publication: Trainor-Guitton, W., Hoversten, G. M., Ramirez, A., Roberts, J., Júlíusson, E., Key, K., Mellors, R. (Sept-Oct. 2014) The value of spatial information for determining well placement: a geothermal example, Geophysics.

  9. When soft controls get slippery: User interfaces and human error

    SciTech Connect (OSTI)

    Stubler, W.F.; O`Hara, J.M.

    1998-12-01

    Many types of products and systems that have traditionally featured physical control devices are now being designed with soft controls--input formats appearing on computer-based display devices and operated by a variety of input devices. A review of complex human-machine systems found that soft controls are particularly prone to some types of errors and may affect overall system performance and safety. This paper discusses the application of design approaches for reducing the likelihood of these errors and for enhancing usability, user satisfaction, and system performance and safety.

  10. Graphical User Interface for Simplified Neutron Transport Calculations

    SciTech Connect (OSTI)

    Schwarz, Randolph; Carter, Leland L

    2011-07-18

    A number of codes perform simple photon physics calculations. The nuclear industry is lacking in similar tools to perform simplified neutron physics shielding calculations. With the increased importance of performing neutron calculations for homeland security applications and defense nuclear nonproliferation tasks, having an efficient method for performing simple neutron transport calculations becomes increasingly important. Codes such as Monte Carlo N-particle (MCNP) can perform the transport calculations; however, the technical details in setting up, running, and interpreting the required simulations are quite complex and typically go beyond the abilities of most users who need a simple answer to a neutron transport calculation. The work documented in this report resulted in the development of the NucWiz program, which can create an MCNP input file for a set of simple geometries, source, and detector configurations. The user selects source, shield, and tally configurations from a set of pre-defined lists, and the software creates a complete MCNP input file that can be optionally run and the results viewed inside NucWiz.

  11. Graphical user interfaces for McCellan Nuclear Radiation Center (MNRC).

    SciTech Connect (OSTI)

    Brown-VanHoozer, S. A.

    1998-08-27

    McClellan's Nuclear Radiation Center (MNRC) control console is in the process of being replaced due to spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and incorporating human factors during all stages of the graphical user interface (GUI) development and control console design.

  12. Renewable Electric Plant Information System user interface manual: Paradox 7 Runtime for Windows

    SciTech Connect (OSTI)

    1996-11-01

    The Renewable Electric Plant Information System (REPiS) is a comprehensive database with detailed information on grid-connected renewable electric plants in the US. The current version, REPiS3 beta, was developed in Paradox for Windows. The user interface (UI) was developed to facilitate easy access to information in the database, without the need to have, or know how to use, Paradox for Windows. The UI is designed to provide quick responses to commonly requested sorts of the database. A quick perusal of this manual will familiarize one with the functions of the UI and will make use of the system easier. There are six parts to this manual: (1) Quick Start: Instructions for Users Familiar with Database Applications; (2) Getting Started: The Installation Process; (3) Choosing the Appropriate Report; (4) Using the User Interface; (5) Troubleshooting; (6) Appendices A and B.

  13. Excel spreadsheet discussed in Report Appendix

    Broader source: Energy.gov [DOE]

    The functional spreadsheet which accompanies the Accounting for Uncertainty in Lumen Measurements report.

  14. TOOKUIL: A case study in user interface development for safety code application

    SciTech Connect (OSTI)

    Gray, D.L.; Harkins, C.K.; Hoole, J.G.

    1997-07-01

    Traditionally, there has been a very high learning curve associated with using nuclear power plant (NPP) analysis codes. Even for seasoned plant analysts and engineers, the process of building or modifying an input model for present day NPP analysis codes is tedious, error prone, and time consuming. Current cost constraints and performance demands place an additional burden on today`s safety analysis community. Advances in graphical user interface (GUI) technology have been applied to obtain significant productivity and quality assurance improvements for the Transient Reactor Analysis Code (TRAC) input model development. KAPL Inc. has developed an X Windows-based graphical user interface named TOOKUIL which supports the design and analysis process, acting as a preprocessor, runtime editor, help system, and post processor for TRAC. This paper summarizes the objectives of the project, the GUI development process and experiences, and the resulting end product, TOOKUIL.

  15. IRC Budget Proposal spreadsheet example | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    IRC Budget Proposal spreadsheet example IRC Budget Proposal spreadsheet example An example budget proposal for NEUP Integrated Research Project. Example Budget spreadsheet ...

  16. COREMAP: Graphical user interface for displaying reactor core data in an interactive hexagon map

    SciTech Connect (OSTI)

    Muscat, F.L.; Derstine, K.L.

    1995-06-01

    COREMAP is a Graphical User Interface (GUI) designed to assist users read and check reactor core data from multidimensional neutronic simulation models in color and/or as text in an interactive 2D planar grid of hexagonal subassemblies. COREMAP is a complete GEODST/RUNDESC viewing tool which enables the user to access multi data set files (e.g. planes, moments, energy groups ,... ) and display up to two data sets simultaneously, one as color and the other as text. The user (1) controls color scale characteristics such as type (linear or logarithmic) and range limits, (2) controls the text display based upon conditional statements on data spelling, and value. (3) chooses zoom features such as core map size, number of rings and surrounding subassemblies, and (4) specifies the data selection for supplied popup subwindows which display a selection of data currently off-screen for a selected cell, as a list of data and/or as a graph. COREMAP includes a RUNDESC file editing tool which creates ``proposed`` Run-description files by point and click revisions to subassembly assignments in an existing EBRII Run-description file. COREMAP includes a fully automated printing option which creates high quality PostScript color or greyscale images of the core map independent of the monitor used, e.g. color prints can be generated with a session from a color or monochrome monitor. The automated PostScript output is an alternative to the xgrabsc based printing option. COREMAP includes a plotting option which creates graphs related to a selected cell. The user specifies the X and Y coordinates types (planes, moment, group, flux ,... ) and a parameter, P, when displaying several curves for the specified (X, Y) pair COREMAP supports hexagonal geometry reactor core configurations specified by: the GEODST file and binary Standard Interface Files and the RUNDESC ordering.

  17. Force Control and Nonlinear Master-Slave Force Profile to Manage an Admittance Type Multi-Fingered Haptic User Interface

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-08-01

    Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in remote and/or hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space to name a few. In order to achieve this end the research presented in this paper has developed an admittance type exoskeleton like multi-fingered haptic hand user interface that secures the users palm and provides 3-dimensional force feedback to the users fingertips. Atypical to conventional haptic hand user interfaces that limit themselves to integrating the human hands characteristics just into the systems mechanical design this system also perpetuates that inspiration into the designed user interfaces controller. This is achieved by manifesting the property differences of manipulation and grasping activities as they pertain to the human hand into a nonlinear master-slave force relationship. The results presented in this paper show that the admittance-type system has sufficient bandwidth that it appears nearly transparent to the user when the user is in free motion and when the system is subjected to a manipulation task, increased performance is achieved using the nonlinear force relationship compared to the traditional linear scaling techniques implemented in the vast majority of systems.

  18. Development and New Directions for the RELAP5-3D Graphical Users Interface

    SciTech Connect (OSTI)

    Mesina, George Lee

    2001-09-01

    The direction of development for the RELAP5 Graphical User Interfaces (RGUI) has been extended. In addition to existing plans for displaying all aspects of RELAP5 calculations, the plan now includes plans to display the calculations of a variety of codes including SCDAP, RETRAN and FLUENT. Recent work has included such extensions along with the previously planned and user-requested improvements and extensions. Visualization of heat-structures has been added. Adaptations were made for another computer program, SCDAP-3D, including plant core views. An input model builder for generating RELAP5-3D input files was partially implemented. All these are reported. Plans for future work are also summarized. These include an input processor that transfers steady-state conditions into an input file.

  19. User Guide for the R5EXEC Coupling Interface in the RELAP5-3D Code

    SciTech Connect (OSTI)

    Forsmann, J. Hope; Weaver, Walter L.

    2015-04-01

    This report describes the R5EXEC coupling interface in the RELAP5-3D computer code from the users perspective. The information in the report is intended for users who want to couple RELAP5-3D to other thermal-hydraulic, neutron kinetics, or control system simulation codes.

  20. Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)

    ScienceCinema (OSTI)

    Silver, Pam [Harvard University

    2011-06-03

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  1. Method and system for providing work machine multi-functional user interface

    DOE Patents [OSTI]

    Hoff, Brian D.; Akasam, Sivaprasad; Baker, Thomas M.

    2007-07-10

    A method is performed to provide a multi-functional user interface on a work machine for displaying suggested corrective action. The process includes receiving status information associated with the work machine and analyzing the status information to determine an abnormal condition. The process also includes displaying a warning message on the display device indicating the abnormal condition and determining one or more corrective actions to handle the abnormal condition. Further, the process includes determining an appropriate corrective action among the one or more corrective actions and displaying a recommendation message on the display device reflecting the appropriate corrective action. The process may also include displaying a list including the remaining one or more corrective actions on the display device to provide alternative actions to an operator.

  2. Designing Biological Systems for Sustainability and Programmed Environmental Interface (2011 JGI User Meeting)

    SciTech Connect (OSTI)

    Silver, Pam [Harvard University] [Harvard University

    2011-03-23

    The U.S. Department of Energy Joint Genome Institute (JGI) invited scientists interested in the application of genomics to bioenergy and environmental issues, as well as all current and prospective users and collaborators, to attend the annual DOE JGI Genomics of Energy & Environment Meeting held March 22-24, 2011 in Walnut Creek, Calif. The emphasis of this meeting was on the genomics of renewable energy strategies, carbon cycling, environmental gene discovery, and engineering of fuel-producing organisms. The meeting features presentations by leading scientists advancing these topics. Pam Silver of Harvard University gives a presentation on "Designing Biological Systems for Sustainability and Programmed Environmental Interface" at the 6th annual Genomics of Energy & Environment Meeting on March 23, 2011

  3. SSRL Web Interface FAQ as of April 6, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Interface FAQ as of April 6, 2011 1) What version of Excel do I require to use the Spreadsheet? The spreadsheet was created in Excel 2007, but is compatible with Excel 97-2003. ...

  4. Visualization for Hyper-Heuristics. Front-End Graphical User Interface

    SciTech Connect (OSTI)

    Kroenung, Lauren

    2015-03-01

    Modern society is faced with ever more complex problems, many of which can be formulated as generate-and-test optimization problems. General-purpose optimization algorithms are not well suited for real-world scenarios where many instances of the same problem class need to be repeatedly and efficiently solved because they are not targeted to a particular scenario. Hyper-heuristics automate the design of algorithms to create a custom algorithm for a particular scenario. While such automated design has great advantages, it can often be difficult to understand exactly how a design was derived and why it should be trusted. This project aims to address these issues of usability by creating an easy-to-use graphical user interface (GUI) for hyper-heuristics to support practitioners, as well as scientific visualization of the produced automated designs. My contributions to this project are exhibited in the user-facing portion of the developed system and the detailed scientific visualizations created from back-end data.

  5. User interface in ORACLE for the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD)

    SciTech Connect (OSTI)

    James, T. ); Loftis, J. )

    1990-07-01

    The Directorate of Personal Property of the Military Traffic Management Command (MTMC) requested that Oak Ridge National laboratory (ORNL) design a prototype decision support system, the Worldwide Household Goods Information System for Transportation Modernization (WHIST-MOD). This decision support system will automate current tasks and provide analysis tools for evaluating the Personal Property Program, predicting impacts to the program, and planning modifications to the program to meet the evolving needs of military service members and the transportation industry. The system designed by ORNL consists of three application modules: system dictionary applications, data acquisition and administration applications, and user applications. The development of the user applications module is divided into two phases. Round 1 is the data selection front-end interface, and Round 2 is the output or back-end interface. This report describes the prototyped front-end interface for the user application module. It discusses user requirements and the prototype design. The information contained in this report is the product of in-depth interviews with MTMC staff, prototype meetings with the users, and the research and design work conducted at ORNL. 18 figs., 2 tabs.

  6. How to Create, Modify, and Interface Aspen In-House and User Databanks for System Configuration 1:

    SciTech Connect (OSTI)

    Camp, D W

    2000-10-27

    The goal of this document is to provide detailed instructions to create, modify, interface, and test Aspen User and In-House databanks with minimal frustration. The level of instructions are aimed at a novice Aspen Plus simulation user who is neither a programming nor computer-system expert. The instructions are tailored to Version 10.1 of Aspen Plus and the specific computing configuration summarized in the Title of this document and detailed in Section 2. Many details of setting up databanks depend on the computing environment specifics, such as the machines, operating systems, command languages, directory structures, inter-computer communications software, the version of the Aspen Engine and Graphical User Interface (GUI), and the directory structure of how these were installed.

  7. How to Create, Modify, and Interface Aspen In-House and User Databanks for System Configuration 2:

    SciTech Connect (OSTI)

    Camp, D W

    2000-10-27

    The goal of this document is to provide detailed instructions to create, modify, interface, and test Aspen User and In-House databanks with minimal frustration. The level of instructions are aimed at a novice Aspen Plus simulation user who is neither a programming nor computer-system expert. The instructions are tailored to Version 10.1 of Aspen Plus and the specific computing configuration summarized in the Title of this document and detailed in Section 2. Many details of setting up databanks depend on the computing environment specifics, such as the machines, operating systems, command languages, directory structures, inter-computer communications software, the version of the Aspen Engine and Graphical User Interface (GUI), and the directory structure of how these were installed.

  8. NONLINEAR FORCE PROFILE USED TO INCREASE THE PERFORMANCE OF A HAPTIC USER INTERFACE FOR TELEOPERATING A ROBOTIC HAND

    SciTech Connect (OSTI)

    Anthony L. Crawford

    2012-07-01

    MODIFIED PAPER TITLE AND ABSTRACT DUE TO SLIGHTLY MODIFIED SCOPE: TITLE: Nonlinear Force Profile Used to Increase the Performance of a Haptic User Interface for Teleoperating a Robotic Hand Natural movements and force feedback are important elements in using teleoperated equipment if complex and speedy manipulation tasks are to be accomplished in hazardous environments, such as hot cells, glove boxes, decommissioning, explosives disarmament, and space. The research associated with this paper hypothesizes that a user interface and complementary radiation compatible robotic hand that integrates the human hand’s anthropometric properties, speed capability, nonlinear strength profile, reduction of active degrees of freedom during the transition from manipulation to grasping, and just noticeable difference force sensation characteristics will enhance a user’s teleoperation performance. The main contribution of this research is in that a system that concisely integrates all these factors has yet to be developed and furthermore has yet to be applied to a hazardous environment as those referenced above. In fact, the most prominent slave manipulator teleoperation technology in use today is based on a design patented in 1945 (Patent 2632574) [1]. The robotic hand/user interface systems of similar function as the one being developed in this research limit their design input requirements in the best case to only complementing the hand’s anthropometric properties, speed capability, and linearly scaled force application relationship (e.g. robotic force is a constant, 4 times that of the user). In this paper a nonlinear relationship between the force experienced between the user interface and the robotic hand was devised based on property differences of manipulation and grasping activities as they pertain to the human hand. The results show that such a relationship when subjected to a manipulation task and grasping task produces increased performance compared to the

  9. Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... offered at CAMD's annual user meeting) or by retaking the online CAMD Radiation Safety Test. If your training has expired your access card will not allow access to the ...

  10. Managing Financing Programs-- Spreadsheet Models (Text Version)

    Broader source: Energy.gov [DOE]

    Chris: - financial market development team. I'm really glad that all of you have been able to take time out of your busy days to come and share some time with us talking about using spreadsheet...

  11. Consortium Participant List - Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Consortium Participant List - Spreadsheet Consortium Participant List - Spreadsheet Membership in the Consortium is open to municipalities, utilities, and energy efficiency organizations, with participation at various levels from other interested parties. consortium-participant-list.xlsx (29.14 KB) More Documents & Publications Fuel Cell Power Plants Biofuel Case Study - Tulare, CA Microsoft Word - DE-FOA-0000013 Amendment 000003.doc Funding Opportunity Announcement: Recovery Act … Energy

  12. Renewable Energy Cost Optimization Spreadsheet

    Energy Science and Technology Software Center (OSTI)

    2007-12-31

    The Software allow users to determine the optimum combination of renewable energy technologies to minimize life cycle cost for a facility by employing various algorithms which calculate initial and operating cost, energy delivery, and other attributes associated with each technology as a function of size.

  13. A proposal for a user-level, message passing interface in a distributed memory environment

    SciTech Connect (OSTI)

    Dongarra, J.J. |; Hempel, R.; Hey, A.J.G.; Walker, D.W.

    1993-02-01

    This paper describes Message Passing Interface 1 (MPI1), a proposed library interface standard for supporting point-to-point message passing. The intended standard will be provided with Fortran 77 and C interfaces, and will form the basis of a standard high level communication environment featuring collective communication and data distribution transformations. The standard proposed here provides blocking, nonblocking, and synchronized message passing between pairs of processes, with message selectivity by source process and message type. Provision is made for noncontiguous messages. Context control provides a convenient means of avoiding message selectivity conflicts between different phases of an application. The ability to form and manipulate process groups permits task parallelism to be exploited, and is a useful abstraction in controlling certain types of collective communication.

  14. Recovery Act Monthly Reporting Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Monthly Reporting Spreadsheet Recovery Act Monthly Reporting Spreadsheet Monthly Update Report Data Recovery Act Monthly Reporting Spreadsheet (84.9 KB) More Documents & Publications Audit Letter Report: OAS-RA-L-10-01 Audit Report: OAS-RA-L-12-02 Audit Special Report: OAS-RA-10-0

  15. FY 2014 Funding History Detail Spreadsheet | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Budget » FY 2014 Budget Justification » FY 2014 Funding History Detail Spreadsheet FY 2014 Funding History Detail Spreadsheet FY 2014 Funding History Detail Spreadsheet (3.5 MB) (3.39 MB) More Documents & Publications CONSUMER CLOTHES WASHERS (APPENDIX J2) Direct Heating Equipment- v2.0 consumer Clothes Washers (Appendix J2)

  16. Current implementation and future plans on new code architecture, programming language and user interface

    SciTech Connect (OSTI)

    Brun, B.

    1997-07-01

    Computer technology has improved tremendously during the last years with larger media capacity, memory and more computational power. Visual computing with high-performance graphic interface and desktop computational power have changed the way engineers accomplish everyday tasks, development and safety studies analysis. The emergence of parallel computing will permit simulation over a larger domain. In addition, new development methods, languages and tools have appeared in the last several years.

  17. RGUI 1.0, New Graphical User Interface for RELAP5-3D

    SciTech Connect (OSTI)

    Mesina, George Lee; Galbraith, James Andrew

    1999-04-01

    With the advent of three-dimensional modeling in nuclear safety analysis codes, the need has arisen for a new display methodology. Currently, analysts either sort through voluminous numerical displays of data at points in a region, or view color coded interpretations of the data on a two-dimensional rendition of the plant. RGUI 1.0 provides 3D capability for displaying data. The 3D isometric hydrodynamic image is built automatically from the input deck without additional input from the user. Standard view change features allow the user to focus on only the important data. Familiar features that are standard to the nuclear industry, such as run, interact, and monitor, are included. RGUI 1.0 reduces the difficulty of analyzing complex three dimensional plants.

  18. RGUI 1.0, New Graphical User Interface for RELAP5-3D

    SciTech Connect (OSTI)

    G. L. Mesina; J. Galbraith

    1999-04-01

    With the advent of three-dimensional modeling in nuclear safety analysis codes, the need has arisen for a new display methodology. Currently, analysts either sort through voluminous numerical displays of data at points in a region, or view color coded interpretations of the data on a two-dimensional rendition of the plant. RGUI 1.0 provides 3D capability for displaying data. The 3D isometric hydrodynamic image is built automatically from the input deck without additional input from the user. Standard view change features allow the user to focus on only the important data. Familiar features that are standard to the nuclear industry, such as run, interact, and monitor, are included. RGUI 1.0 reduces the difficulty of analyzing complex three-dimensional plants.

  19. Cost of Renewable Energy Spreadsheet Tool (CREST) | Open Energy...

    Open Energy Info (EERE)

    cleanenergysolutions.orgcontentcost-renewable-energy-spreadsheet-too Language: English Policies: Regulations Regulations: Feed-in Tariffs Assess projects, design cost-based...

  20. Hawaii demand-side management resource assessment. Final report, Reference Volume 5: The DOETRAN user`s manual; The DOE-2/DBEDT DSM forecasting model interface

    SciTech Connect (OSTI)

    1995-04-01

    The DOETRAN model is a DSM database manager, developed to act as an intermediary between the whole building energy simulation model, DOE-2, and the DBEDT DSM Forecasting Model. DOETRAN accepts output data from DOE-2 and TRANslates that into the format required by the forecasting model. DOETRAN operates in the Windows environment and was developed using the relational database management software, Paradox 5.0 for Windows. It is not necessary to have any knowledge of Paradox to use DOETRAN. DOETRAN utilizes the powerful database manager capabilities of Paradox through a series of customized user-friendly windows displaying buttons and menus with simple and clear functions. The DOETRAN model performs three basic functions, with an optional fourth. The first function is to configure the user`s computer for DOETRAN. The second function is to import DOE-2 files with energy and loadshape data for each building type. The third main function is to then process the data into the forecasting model format. As DOETRAN processes the DOE-2 data, graphs of the total electric monthly impacts for each DSM measure appear, providing the user with a visual means of inspecting DOE-2 data, as well as following program execution. DOETRAN provides three tables for each building type for the forecasting model, one for electric measures, gas measures, and basecases. The optional fourth function provided by DOETRAN is to view graphs of total electric annual impacts by measure. This last option allows a comparative view of how one measure rates against another. A section in this manual is devoted to each of the four functions mentioned above, as well as computer requirements and exiting DOETRAN.

  1. Reactor User Interface Technology Development Roadmaps for a High Temperature Gas-Cooled Reactor Outlet Temperature of 750 degrees C

    SciTech Connect (OSTI)

    Ian Mckirdy

    2010-12-01

    This report evaluates the technology readiness of the interface components that are required to transfer high-temperature heat from a High Temperature Gas-Cooled Reactor (HTGR) to selected industrial applications. This report assumes that the HTGR operates at a reactor outlet temperature of 750°C and provides electricity and/or process heat at 700°C to conventional process applications, including the production of hydrogen.

  2. SU-E-T-595: Design of a Graphical User Interface for An In-House Monte Carlo Based Treatment Planning System: Planning and Contouring Tools

    SciTech Connect (OSTI)

    EMAM, M; Eldib, A; Lin, M; Li, J; Chibani, O; Ma, C

    2014-06-01

    Purpose: An in-house Monte Carlo based treatment planning system (MC TPS) has been developed for modulated electron radiation therapy (MERT). Our preliminary MERT planning experience called for a more user friendly graphical user interface. The current work aimed to design graphical windows and tools to facilitate the contouring and planning process. Methods: Our In-house GUI MC TPS is built on a set of EGS4 user codes namely MCPLAN and MCBEAM in addition to an in-house optimization code, which was named as MCOPTIM. Patient virtual phantom is constructed using the tomographic images in DICOM format exported from clinical treatment planning systems (TPS). Treatment target volumes and critical structures were usually contoured on clinical TPS and then sent as a structure set file. In our GUI program we developed a visualization tool to allow the planner to visualize the DICOM images and delineate the various structures. We implemented an option in our code for automatic contouring of the patient body and lungs. We also created an interface window displaying a three dimensional representation of the target and also showing a graphical representation of the treatment beams. Results: The new GUI features helped streamline the planning process. The implemented contouring option eliminated the need for performing this step on clinical TPS. The auto detection option for contouring the outer patient body and lungs was tested on patient CTs and it was shown to be accurate as compared to that of clinical TPS. The three dimensional representation of the target and the beams allows better selection of the gantry, collimator and couch angles. Conclusion: An in-house GUI program has been developed for more efficient MERT planning. The application of aiding tools implemented in the program is time saving and gives better control of the planning process.

  3. Questions below are regarding the spreadsheet EERE-2014-BT-STD-0031-002 unless o

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    below are regarding the spreadsheet EERE-2014-BT-STD-0031-002 unless otherwise noted. 1) The 2011 LCC spreadsheet predicted lower LCC savings, especially for replacements in the south region and for the highest efficiency (98%) condensing furnace cases, compared to the 2014 LCC spreadsheet even though the 2011 LCC spreadsheet did not include the potential of fuel switching. a) What are the major reasons for the significant changes in LCC savings? b) Why do consumer impacts for replacements in

  4. When Spreadsheets Become Software - Quality Control Challenges and Approaches - 13360

    SciTech Connect (OSTI)

    Fountain, Stefanie A.; Chen, Emmie G.; Beech, John F.; Wyatt, Elizabeth E.; Quinn, Tanya B.; Seifert, Robert W.

    2013-07-01

    As part of a preliminary waste acceptance criteria (PWAC) development, several commercial models were employed, including the Hydrologic Evaluation of Landfill Performance model (HELP) [1], the Disposal Unit Source Term - Multiple Species model (DUSTMS) [2], and the Analytical Transient One, Two, and Three-Dimensional model (AT123D) [3]. The results of these models were post-processed in MS Excel spreadsheets to convert the model results to alternate units, compare the groundwater concentrations to the groundwater concentration thresholds, and then to adjust the waste contaminant masses (based on average concentration over the waste volume) as needed in an attempt to achieve groundwater concentrations at the limiting point of assessment that would meet the compliance concentrations while maximizing the potential use of the landfill (i.e., maximizing the volume of projected waste being generated that could be placed in the landfill). During the course of the PWAC calculation development, one of the Microsoft (MS) Excel spreadsheets used to post-process the results of the commercial model packages grew to include more than 575,000 formulas across 18 worksheets. This spreadsheet was used to assess six base scenarios as well as nine uncertainty/sensitivity scenarios. The complexity of the spreadsheet resulted in the need for a rigorous quality control (QC) procedure to verify data entry and confirm the accuracy of formulas. (authors)

  5. LANSCE | Users | User Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Office LANSCE User Office and Visitor Center The LANSCE User Office is responsible for coordinating the users with LANSCE instrument scientist and the facility. Users contact the User Office weeks before they arrive at the LANSCE Visitor Center at Technical Area 53. Among their many responsibilities, the team issues the call for proposals, coordinates proposal experiment schedules, directs users to the training center, issues badges and dosimeters, helps to arrange tours of the facilities,

  6. Dairy Analytics and Nutrient Analysis (DANA) Prototype System User Manual

    SciTech Connect (OSTI)

    Sam Alessi; Dennis Keiser

    2012-10-01

    This document is a user manual for the Dairy Analytics and Nutrient Analysis (DANA) model. DANA provides an analysis of dairy anaerobic digestion technology and allows users to calculate biogas production, co-product valuation, capital costs, expenses, revenue and financial metrics, for user customizable scenarios, dairy and digester types. The model provides results for three anaerobic digester types; Covered Lagoons, Modified Plug Flow, and Complete Mix, and three main energy production technologies; electricity generation, renewable natural gas generation, and compressed natural gas generation. Additional options include different dairy types, bedding types, backend treatment type as well as numerous production, and economic parameters. DANA’s goal is to extend the National Market Value of Anaerobic Digester Products analysis (informa economics, 2012; Innovation Center, 2011) to include a greater and more flexible set of regional digester scenarios and to provide a modular framework for creation of a tool to support farmer and investor needs. Users can set up scenarios from combinations of existing parameters or add new parameters, run the model and view a variety of reports, charts and tables that are automatically produced and delivered over the web interface. DANA is based in the INL’s analysis architecture entitled Generalized Environment for Modeling Systems (GEMS) , which offers extensive collaboration, analysis, and integration opportunities and greatly speeds the ability construct highly scalable web delivered user-oriented decision tools. DANA’s approach uses server-based data processing and web-based user interfaces, rather a client-based spreadsheet approach. This offers a number of benefits over the client-based approach. Server processing and storage can scale up to handle a very large number of scenarios, so that analysis of county, even field level, across the whole U.S., can be performed. Server based databases allow dairy and digester

  7. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Hanson, Steven CJ

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  8. Geothermal Electricity Technology Evaluation Model (GETEM) Individual Case Files and Summary Spreadsheet (GETEM version Spring 2013)

    SciTech Connect (OSTI)

    Hanson, Steven CJ

    2013-03-07

    This group of files-- 10 GETEM individual case files and 1 summary spreadsheet-- contain final data from the revisions between summer 2011 and spring 2013.

  9. A spreadsheet-coupled SOLGAS: A computerized thermodynamic equilibrium calculation tool. Revision 1

    SciTech Connect (OSTI)

    Trowbridge, L.D.; Leitnaker, J.M.

    1995-07-01

    SOLGAS, an early computer program for calculating equilibrium in a chemical system, has been made more user-friendly, and several ``bells and whistles`` have been added. The necessity to include elemental species has been eliminated. The input of large numbers of starting conditions has been automated. A revised spreadsheet-based format for entering data, including non-ideal binary and ternary mixtures, simplifies and reduces chances for error. Calculational errors by SOLGAS are flagged, and several programming errors are corrected. Auxiliary programs are available to assemble and partially automate plotting of large amounts of data. Thermodynamic input data can be changed on line. The program can be operated with or without a co-processor. Copies of the program, suitable for the IBM-PC or compatibles with at least 384 bytes of low RAM, are available from the authors. This user manual contains appendices with examples of the use of SOLGAS. These range from elementary examples, such as, the relationships among water, ice, and water vapor, to more complex systems: phase diagram calculation of UF{sub 4} and UF{sub 6} system; burning UF{sub 4} in fluorine; thermodynamic calculation of the Cl-F-O-H system; equilibria calculations in the CCl{sub 4}--CH{sub 3}OH system; and limitations applicable to aqueous solutions. An appendix also contains the source code.

  10. User Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Information User Information Print ALSHub User Portal User Guide A step-by-step guide for users about how to apply and prepare for beam time at the ALS. Experiment Safety Upon receiving beam time, complete an Experiment Safety Sheet Prospective Users Users from Industry Contacts for Users User Policy Data Management Users' Executive Committee (UEC) User Meeting

  11. FCPower Case Study Data | Open Energy Information

    Open Energy Info (EERE)

    learnedbest practices, Softwaremodeling tools User Interface: Spreadsheet Website: www.hydrogen.energy.govcffcpoweranalysismodeldata.cfm RelatedTo: Fuel Cell Power...

  12. Fuel-Efficient Stove Programs in Humanitarian Settings | Open...

    Open Energy Info (EERE)

    Prepare a Plan, Evaluate Effectiveness and Revise as Needed Resource Type: Guidemanual, Lessons learnedbest practices, Presentation, Publications User Interface: Spreadsheet,...

  13. LANSCE | Users | User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LANSCE User Program LANSCE's User Program ensures the research it oversees represents the cutting edge of nuclear and materials science and technology. The User Program plays a key role in training the next generation of top scientists, attracting the best graduate students, postdoctoral researchers, and early-career scientists (defined as those less than 40-years old). The User Program typically begins with the first call for proposals and run until the end of the run-cycle. The User-Program

  14. 2012 PATRIOT SCRIPT User's Guide

    SciTech Connect (OSTI)

    Cuellar, Leticia; Cleland, Timothy J.; Kubicek, Deborah A.; Mathis, Mark M.; Stroud, Phillip D.

    2012-05-31

    PATRIOT Script is an application that executes Patriot batch runs. This document provides a description of this application and how to run it. The basic user access tool PATRIOT Client allows a user to generate several most reliable paths in one run: one can specify a list of sources (origins) and targets, and PATRIOT finds for a given architecture option and one choice of device all the most reliable paths between all these sources and targets. The main objective of PATRIOT Script is to provide a tool for making automatic PATRIOT runs not only for a prespecified set of sources and targets, but also for a pre-specified set of devices and various architecture options. Running PATRIOT Script requires two basic steps that will be explained in more detail next: (1) Pre-preparation of an excel spreadsheet with the information about the desired runs; and (2) Opening the PATRIOT Script application, reading in the excel-spreadsheet and running the desired scenarios. Sections 1 and 2 explain each of these steps, and section 3 describes the output of the PATRIOT Script. For a detail description of the models and data behind PATRIOT and a detailed explanation of all the architecture options see [1]. For instructions of how to run PATRIOT Client see [2].

  15. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Home Contact User Services Print The User Services Group is available to aid ALS users before they arrive, while they are here, and after they leave. User Office Experiment...

  16. User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Facilities User Facilities User facility agreements allow Los Alamos partners and other entities to conduct research at our unique facilities. In 2011, LANL hosted more than 1,200 users at CINT, LANSCE, and NHMFL. Users came from across the DOE complex, from international academia, and from industrial companies from 45 states across the U.S. Unique world-class user facilities foster rich research opportunities Through its technology transfer efforts, LANL can implement user facility

  17. Virtual button interface

    DOE Patents [OSTI]

    Jones, Jake S.

    1999-01-01

    An apparatus and method of issuing commands to a computer by a user interfacing with a virtual reality environment. To issue a command, the user directs gaze at a virtual button within the virtual reality environment, causing a perceptible change in the virtual button, which then sends a command corresponding to the virtual button to the computer, optionally after a confirming action is performed by the user, such as depressing a thumb switch.

  18. Virtual button interface

    DOE Patents [OSTI]

    Jones, J.S.

    1999-01-12

    An apparatus and method of issuing commands to a computer by a user interfacing with a virtual reality environment are disclosed. To issue a command, the user directs gaze at a virtual button within the virtual reality environment, causing a perceptible change in the virtual button, which then sends a command corresponding to the virtual button to the computer, optionally after a confirming action is performed by the user, such as depressing a thumb switch. 4 figs.

  19. LANSCE | Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rosen Scholar Rosen Prize Users dotline User Information Planning for Arrival: Contact the User Office several weeks before arriving at LANSCE. The LANSCE User Office will assist you in preparing for your visit to LANSCE. Plan to arrive one day prior to your scheduled beam time. User Office Contacts Division Office Ph: 505.667.5051 Lujan Center User Office lujan-uo@lanl.gov WNR User Program Administrator Tanya Herrera Ph: 505.667.6797 User Office Main Desk Email: lansce-user-office@lanl.gov Ph:

  20. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Section Sue Bailey This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Services Group Leader Prospective users Proprietary users...

  1. JEDI Marine and Hydrokinetic Model: User Reference Guide

    SciTech Connect (OSTI)

    Goldberg, M.; Previsic, M.

    2011-04-01

    The Jobs and Economic Development Impact Model (JEDI) for Marine and Hydrokinetics (MHK) is a user-friendly spreadsheet-based tool designed to demonstrate the economic impacts associated with developing and operating MHK power systems in the United States. The JEDI MHK User Reference Guide was developed to assist users in using and understanding the model. This guide provides information on the model's underlying methodology, as well as the sources and parameters used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted.

  2. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposals for beam time User publications database Guest logistics and parking Loan of laptop, stealth phone and projector Logisitics for the annual users' meeting ALS Experiment...

  3. Users Manual for the FEHMN application

    SciTech Connect (OSTI)

    Zyvoloski, G.A.; Robinson, B.A.; Dash, Z.V.; Trease, L.L.

    1996-09-01

    The user`s manual documents the use of the Yucca Mountain Site Characterization Projects Finite element heat and mass transfer code (FEHMN) application. The manual covers: Program considerations, data files, input data, output, system interface, and examples.

  4. The PANTHER User Experience

    SciTech Connect (OSTI)

    Coram, Jamie L.; Morrow, James D.; Perkins, David Nikolaus

    2015-09-01

    This document describes the PANTHER R&D Application, a proof-of-concept user interface application developed under the PANTHER Grand Challenge LDRD. The purpose of the application is to explore interaction models for graph analytics, drive algorithmic improvements from an end-user point of view, and support demonstration of PANTHER technologies to potential customers. The R&D Application implements a graph-centric interaction model that exposes analysts to the algorithms contained within the GeoGraphy graph analytics library. Users define geospatial-temporal semantic graph queries by constructing search templates based on nodes, edges, and the constraints among them. Users then analyze the results of the queries using both geo-spatial and temporal visualizations. Development of this application has made user experience an explicit driver for project and algorithmic level decisions that will affect how analysts one day make use of PANTHER technologies.

  5. PST user`s guide

    SciTech Connect (OSTI)

    Rempe, J.L.; Cebull, M.J.; Gilbert, B.G.

    1996-10-01

    The Parametric Source Term (PST) software allows estimation of radioactivity release fractions for Level 2 Probabilistic Safety Assessments (PSAs). PST was developed at the Idaho National Engineering Laboratory (INEL) for the Nuclear Regulatory Commission`s (NRC`s) Accident Sequence Precursor (ASP) Program. PST contains a framework of equations that model activity transport between volumes in the release pathway from the core, through the vessel, through the containment, and to the environment. PST quickly obtains exact solutions to differential equations for activity transport in each volume for each time interval. PST provides a superior method for source term estimation because it: ensures conservation of activity transported across various volumes in the release pathway; provides limited consideration of the time-dependent behavior of input parameter uncertainty distributions; allows input to be quantified using state-of-the-art severe accident analysis code results; increases modeling flexibility because linkage between volumes is specified by user input; and allows other types of Light Water Reactor (LWR) plant designs to be evaluated with minimal modifications. PST is a microcomputer-based system that allows the analyst more flexibility than a mainframe system. PST has been developed to run with both MS DOS and MS Windows 95/NT operating systems. PST has the capability to load ASP Source Term Vector (STV) information, import pre-specified default input for the 6 Pressurized Water Reactors (PWRs) initially analyzed in the NRC ASP program, allow input value modifications for release fraction sensitivity studies, export user-specified default input for the LWR being modeled, report results of radioactivity release calculations at each time interval, and generate formatted results that can interface with other risk assessment codes. This report describes the PST model and provides guidelines for using PST.

  6. User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Facilities User Facilities A new research frontier awaits! Our door is open, and we thrive on mutually beneficial partnerships and collaborations that drive innovations and new technologies. Unique world-class user facilities foster rich research opportunities Through its technology transfer efforts, Los Alamos National Laboratory can implement user facility agreements that allow its partners and other entities to conduct research at many of its unique facilities. While our largest user

  7. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contacts for Users User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address

  8. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  9. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  10. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  11. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  12. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Guide User Guide Print 1. Register with the ALS Create an account on ALSHub-the ALS user portal. 2. Apply for Beam Time 3. Establish a User Agreement 4. Comply with Experiment Safety Requirements Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User Satisfaction Survey 9. Report Publications, Awards, Talks, Acknowledging Work at ALS

  13. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy User Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing

  14. TRANSIMS Interface Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    transims TRANSIMS Interface Development TRACC RESEARCH Computational Fluid Dynamics Computational Structural Mechanics Transportation Systems Modeling TRANSIMS Studio (Figure 1) has been developed by TRACC for the TRANSIMS community as part of the TRANSIMS Open Source project. It provides an integrated development environment (IDE) for TRANSIMS by combining a number of components that work seamlessly with each other. The visible part of the IDE is the graphical user interface (GUI) that allows

  15. Hawaii demand-side management resource assessment. Final report, Reference Volume 4: The DBEDT DSM assessment model user`s manual

    SciTech Connect (OSTI)

    1995-04-01

    The DBEDT DSM Assessment Model (DSAM) is a spreadsheet model developed in Quattro Pro for Windows that is based on the integration of the DBEDT energy forecasting model, ENERGY 2020, with the output from the building energy use simulation model, DOE-2. DOE-2 provides DSM impact estimates for both energy and peak demand. The ``User`s Guide`` is designed to assist DBEDT staff in the operation of DSAM. Supporting information on model structure and data inputs are provided in Volumes 2 and 3 of the Final Report. DSAM is designed to provide DBEDT estimates of the potential DSM resource for each county in Hawaii by measure, program, sector, year, and levelized cost category. The results are provided for gas and electric and for both energy and peak demand. There are two main portions of DSAM, the residential sector and the commercial sector. The basic underlying logic for both sectors are the same. However, there are some modeling differences between the two sectors. The differences are primarily the result of (1) the more complex nature of the commercial sector, (2) memory limitations within Quattro Pro, and (3) the fact that the commercial sector portion of the model was written four months after the residential sector portion. The structure for both sectors essentially consists of a series of input spreadsheets, the portion of the model where the calculations are performed, and a series of output spreadsheets. The output spreadsheets contain both detailed and summary tables and graphs.

  16. User Packages

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Packages User Packages There is more than one way for users to manage installation of Python packages on their own. Users of the Anaconda distribution may create their own environments as described here. Users of the NERSC-built modules can use virtualenv, pip, or compile and install Python packages directly. Using "pip" on Edison and Cori There is an issue with the pip command on the Cray systems because of an SSL certificate verification problem. One symptom is that you create

  17. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Author Guidelines User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address

  18. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  19. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  20. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  1. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected

  2. INL Multi-Robot Control Interface

    Energy Science and Technology Software Center (OSTI)

    2005-03-30

    The INL Multi-Robot Control Interface controls many robots through a single user interface. The interface includes a robot display window for each robot showing the robot’s condition. More than one window can be used depending on the number of robots. The user interface also includes a robot control window configured to receive commands for sending to the respective robot and a multi-robot common window showing information received from each robot.

  3. Property:User Interface | Open Energy Information

    Open Energy Info (EERE)

    Process Engineering Co-Simulator (APECS) + Desktop Application + Agriculture and Land Use National Greenhouse Gas Inventory Software + Desktop Application + AgrometShell + Desktop...

  4. User Policy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policy Print 1. Guiding Principles The aim of User Policy at the Advanced Light Source (ALS) is to provide a framework for establishing a challenging yet congenial environment where talented scientists from different backgrounds can work together in pursuit of the new scientific opportunities presented by the availability of this innovative facility. User policy must address a variety of user needs and sensitivities. On one hand, the qualified researcher with little financial backing needs

  5. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users The facility has been used for more than a decade by a virtual Who's Who of the semiconductor industry to simulate the potential failures posed by cosmic-ray-induced neutrons upon miniature electronic devices, such as chips that help control aircraft or complex integrated circuits in automobiles. Industrial User Information The Neutron and Nuclear Science (WNR) Facility welcomes proposals for beam time experiments from industry users. Proprietary and non-proprietary industrial

  6. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  7. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Services Print General Inquiries: This e-mail address is being protected from spambots. You need JavaScript enabled to view it Tel: 510-486-7745 (dial last four numbers from on-site phones) Location: Building 6 mezzanine, Room 6-2212 Office hours: Monday-Friday 8am - 5pm (new users should arrive before 4pm) Address: Advanced Light Source, Berkeley Lab, MS 6-2100, Berkeley, CA 94720 Group Leader User Services Sue Bailey Prospective users, Industry users This e-mail address is being protected from

  8. User Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Upon receiving beam time, complete an Experiment Safety Sheet. 5. Get Access to Work Onsite 6. Complete Online Safety Training 7. Utilize Available Resources 8. Complete the User ...

  9. Industrial Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industrial Users - Media Publications and Information The Invisible Neutron Threat Neutron-Induced Failures in Semiconductor Devices Nuclear Science Research at the LANSCE-WNR...

  10. Prospective Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    from universities, government labs, and industry who are interested in performing experiments at the general sciences and structural biology beamlines open to users. An...

  11. UNDP-Energy Costing Tool | Open Energy Information

    Open Energy Info (EERE)

    Resource Type: Softwaremodeling tools User Interface: Spreadsheet Website: www.undp.orgenergymdg-serv.htm Cost: Free Equivalent URI: cleanenergysolutions.orgcontent...

  12. Benchmarking and Energy Saving Tool | Open Energy Information

    Open Energy Info (EERE)

    User Interface: Spreadsheet Website: industrial-energy.lbl.govnode100 Cost: Free Language: English References: Benchmarking and Energy Saving Tool 1 Logo: Benchmarking and...

  13. Fuel Cell Power (FCPower) Model | Open Energy Information

    Open Energy Info (EERE)

    of Energy Partner: National Renewable Energy Laboratory Sector: Energy Focus Area: Hydrogen Topics: Finance Resource Type: Softwaremodeling tools User Interface: Spreadsheet...

  14. Ecofys-Sectoral Proposal Templates | Open Energy Information

    Open Energy Info (EERE)

    Baseline projection, GHG inventory, Low emission development planning Resource Type: Softwaremodeling tools User Interface: Spreadsheet ComplexityEase of Use: Moderate Website:...

  15. Sensor Placement + Optimization Software (SPOT) | Open Energy...

    Open Energy Info (EERE)

    modeling tools User Interface: Spreadsheet Website: www.archenergy.comSPOT Cost: Free Language: English References: http:www.archenergy.comSPOT SPOT(tm) is intended to...

  16. CRiSTAL Project Management Tool | Open Energy Information

    Open Energy Info (EERE)

    modeling tools User Interface: Spreadsheet Website: www.iisd.orgcristaltool Cost: Free Language: "English, French, Portuguese, Spanish; Castilian" is not in the list of...

  17. 2014 User Meeting Award Recipients

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 User Meeting Award Recipients 2014 ALS User Meeting Award Recipients Presented on Tuesday, October 7, 2014, by Peter Nico (UEC Chair). David A. Shirley Award for Outstanding Scientific Achievement at the ALS The David A. Shirley Award for Scientific Achievement went to Chuck Fadley (UC Davis and Berkeley Lab), "For significant contributions to a better understanding of surfaces and interfaces through the development of novel x-ray photoemission spectroscopy techniques." David Shirley

  18. TSF Interface Package

    Energy Science and Technology Software Center (OSTI)

    2004-03-01

    A collection of packages of classes for interfacing to sparse and dense matrices, vectors and graphs, and to linear operators. TSF (via TSFCore, TSFCoreUtils and TSFExtended) provides the application programmer interface to any number of solvers, linear algebra libraries and preconditioner packages, providing also a sophisticated technique for combining multiple packages to solve a single problem. TSF provides a collection of abstract base classes that define the interfaces to abstract vector, matrix and linear soeratormore » objects. By using abstract interfaces, users of TSF are not limiting themselves to any one concrete library and can in fact easily combine multiple libraries to solve a single problem.« less

  19. Prospective Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the ALS with all the technical, experiment, and administrative support they require for successful and efficient use of beam time. The kinds of access for users, i.e., General...

  20. NIF Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    users NIF Users Research Opportunities at the National Ignition Facility The National Ignition Facility provides the scientific community with an unprecedented capability for studying materials at extreme pressures, temperatures, and densities. NIF is expected to achieve temperatures and densities almost an order of magnitude greater than those in the sun's core and pressures far in excess of those at the core of Jupiter. The density of neutrons during the tens of picoseconds the NIF target

  1. User Program | Prospective Users US

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Click on the "User Satisfaction Survey" link on the "main menu" page. If you don't have an account you will need to create one. Your login ID (username and email) is the same as ...

  2. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may ... and Information System (IRIS) . User Emails Users may sign up for a Berkeley Lab ...

  3. Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

    SciTech Connect (OSTI)

    Lantz, E.; Goldberg, M.; Keyser, D.

    2013-06-01

    The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

  4. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Meeting ALS User Meeting web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User...

  5. User Services

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a.m. - 12.00 p.m. and 1.00 p.m. - 4.00 p.m. User Office Staff Deborah Smith adriana reza This e-mail address is being protected from spambots. You need JavaScript enabled to...

  6. Multi-robot control interface

    DOE Patents [OSTI]

    Bruemmer, David J.; Walton, Miles C.

    2011-12-06

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  7. Human-computer interface

    DOE Patents [OSTI]

    Anderson, Thomas G.

    2004-12-21

    The present invention provides a method of human-computer interfacing. Force feedback allows intuitive navigation and control near a boundary between regions in a computer-represented space. For example, the method allows a user to interact with a virtual craft, then push through the windshield of the craft to interact with the virtual world surrounding the craft. As another example, the method allows a user to feel transitions between different control domains of a computer representation of a space. The method can provide for force feedback that increases as a user's locus of interaction moves near a boundary, then perceptibly changes (e.g., abruptly drops or changes direction) when the boundary is traversed.

  8. DAKOTA JAGUAR 2.1 user's Manual.

    SciTech Connect (OSTI)

    Adams, Brian M.; Lefantzi, Sophia; Chan, Ethan; Ruthruff, Joseph R.

    2011-06-01

    JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary for a user to use JAGUAR.

  9. User Environment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Environment Environment on Genepool When you log into the Genepool system you will land in your $HOME directory on NERSC's "global homes" file system. The global homes file system is mounted across all NERSC computation systems with the exception of PDSF. The $HOME directory has quota of 40GB and 1,000,000 inodes. To customize your environment, by setting environment variables or aliases, you will need to modify one of the "dot" files that NERSC has created for you. You

  10. T-703: Cisco Unified Communications Manager Open Query Interface Lets

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Remote Users Obtain Database Contents | Department of Energy 703: Cisco Unified Communications Manager Open Query Interface Lets Remote Users Obtain Database Contents T-703: Cisco Unified Communications Manager Open Query Interface Lets Remote Users Obtain Database Contents August 26, 2011 - 3:45pm Addthis PROBLEM: A vulnerability was reported in Cisco Unified Communications Manager. A remote user can obtain database contents PLATFORM: Cisco Unified Communications Manager 6.x, 7.x, 8.0, 8.5

  11. MRDAP User/Developer Documentation

    SciTech Connect (OSTI)

    Joshua Cogliati; Michael Milvich

    2009-09-01

    The Multi-Reactor Design and Analysis Platform (MRDAP) is designed to simplify the creation, transfer and processing of data between computational codes. MRDAP accomplishes these objectives with three parts: 1. allows each integrated code, through a plugin, to specify the required input for execution and the required output needed, 2. creates an interface for execution and data transfer, 3. enables the creation of Graphical User Interfaces (GUI) to assist with input preparation and data visualization. Ultimately, the main motivation of this work is to enable analysts (who perform reactor physics calculations routinely), by providing a tool that increases efficiency and minimizes the potential for errors or failed executions.

  12. Test and User Facilities | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Test and User Facilities Our test and user facilities are available to industry and other organizations for researching, developing, and evaluating energy technologies. We can work with you to design the tests and operate the equipment. A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z A Advanced Research Turbines B Battery Thermal and Life Test Facility Biochemical Conversion Pilot Plant C Controllable Grid Interface Test System D Distributed

  13. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22013 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  14. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    102115 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user ...

  15. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 ALS User Meeting banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users' Executive...

  16. 2013 ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2013 ALS User Meeting Print banner Home Agenda Awards Exhibitors Lodging Posters Registration T-Shirt Contest Transportation Workshops Contact Us User Meeting Archives Users'...

  17. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Print web banner ALS User Meeting: October 5-7, 2015 Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops Contact Us User Meeting...

  18. User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Meeting Awards Print web banner ALS User Meeting Awards See the 2013 User Meeting Awards Winners Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The ALS Users' Executive Committee invites ALS users and staff to submit nominations in recognition of the people who have made significant contributions to the scientific

  19. JLab Users Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JLab Users Group Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. Concerns? JLab Users Group User Liaison Home Users Group Program Advisory Committee User/Researcher Information print version UG Resources Background & Purpose Users Group Wiki By Laws Board of Directors Board of Directors Minutes Directory of Members Events At-A-Glance Member Institutions News Users Group Mailing

  20. Laparoscopic simulation interface

    DOE Patents [OSTI]

    Rosenberg, Louis B.

    2006-04-04

    A method and apparatus for providing high bandwidth and low noise mechanical input and output for computer systems. A gimbal mechanism provides two revolute degrees of freedom to an object about two axes of rotation. A linear axis member is coupled to the gimbal mechanism at the intersection of the two axes of rotation. The linear axis member is capable of being translated along a third axis to provide a third degree of freedom. The user object is coupled to the linear axis member and is thus translatable along the third axis so that the object can be moved along all three degrees of freedom. Transducers associated with the provided degrees of freedom include sensors and actuators and provide an electromechanical interface between the object and a digital processing system. Capstan drive mechanisms transmit forces between the transducers and the object. The linear axis member can also be rotated about its lengthwise axis to provide a fourth degree of freedom, and, optionally, a floating gimbal mechanism is coupled to the linear axis member to provide fifth and sixth degrees of freedom to an object. Transducer sensors are associated with the fourth, fifth, and sixth degrees of freedom. The interface is well suited for simulations of medical procedures and simulations in which an object such as a stylus or a joystick is moved and manipulated by the user.

  1. Human-computer interface including haptically controlled interactions

    DOE Patents [OSTI]

    Anderson, Thomas G.

    2005-10-11

    The present invention provides a method of human-computer interfacing that provides haptic feedback to control interface interactions such as scrolling or zooming within an application. Haptic feedback in the present method allows the user more intuitive control of the interface interactions, and allows the user's visual focus to remain on the application. The method comprises providing a control domain within which the user can control interactions. For example, a haptic boundary can be provided corresponding to scrollable or scalable portions of the application domain. The user can position a cursor near such a boundary, feeling its presence haptically (reducing the requirement for visual attention for control of scrolling of the display). The user can then apply force relative to the boundary, causing the interface to scroll the domain. The rate of scrolling can be related to the magnitude of applied force, providing the user with additional intuitive, non-visual control of scrolling.

  2. LANSCE | Users | LUG | Topical User Workshop

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 LANSCE Topical User Meeting | January 9-10 2012 LANSCE Topical User Workshop LANSCE will host the 2012 Topical User Workshop, January 9-10, 2012. We hope to see you there! Registration | Accommodations | Agenda (some presentations are included on the agenda) LANL foreign nationals may register at anytime. | Poster Dimensions: 32 in x 40 in This workshop will solicit user input for the scientific opportunities offered by the pulse stacker and superconducting accelerator that LANSCE has proposed

  3. T-547: Microsoft Windows Human Interface Device (HID) Vulnerability

    Broader source: Energy.gov [DOE]

    Microsoft Windows does not properly warn the user before enabling additional Human Interface Device (HID) functionality over USB, which allows user-assisted attackers to execute arbitrary programs via crafted USB data, as demonstrated by keyboard and mouse data sent by malware on a Smartphone that the user connected to the computer.

  4. Users' Executive Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee Print The ALS Users' Executive Committee (UEC) is responsible for conveying the concerns and interests of users to ALS management. Members are elected annually by ALS users. To contact a member of the UEC, please email This e-mail address is being protected from spambots. You need JavaScript enabled to view it . ALS Users' Executive Committee Web Site ALS Users' Association Charter The current members of the committee (with terms), as of January 1, 2016, are David

  5. Users' Executive Committee

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee Print The ALS Users' Executive Committee (UEC) is responsible for conveying the concerns and interests of users to ALS management. Members are elected annually by ALS users. To contact a member of the UEC, please email This e-mail address is being protected from spambots. You need JavaScript enabled to view it . ALS Users' Executive Committee Web Site ALS Users' Association Charter The current members of the committee (with terms), as of January 1, 2016, are David

  6. JLF User Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    jlf user group JLF User Group 2015 NIF and JLF User Group Meeting Links: Send request to join the JLF User Group Join the NIF User Group Dr. Carolyn Kuranz - JLF User Group Dr. Carolyn Kuranz received her Ph.D. in Applied Physics from the University of Michigan in 2009. She is currently an Assistant Research Scientist at the Center for Laser Experimental Astrophysical Research and the Center for Radiative Shock Hydrodynamics at the University of Michigan. Her research involves hydrodynamic

  7. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may set up an account for miscellaneous supplies and expenses at the ALS. To establish a user account, please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Budget and Planning, (x 6889). Users can keep track of expenses charged to their Berkeley Lab accounts through the Lab's Integrated Reporting and Information System (IRIS) . User Emails Users may sign up

  8. User Accounts and Emails

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Accounts and Emails Print User Accounts Once a User Agreement is signed, users may set up an account for miscellaneous supplies and expenses at the ALS. To establish a user account, please contact This e-mail address is being protected from spambots. You need JavaScript enabled to view it , Budget and Planning, (x 6889). Users can keep track of expenses charged to their Berkeley Lab accounts through the Lab's Integrated Reporting and Information System (IRIS) . User Emails Users may sign up

  9. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is the document that permits the User andor the home organization to retain ownership of intellectual property. Without the user agreement in place, the University of California...

  10. getnim - NIM's Command Line Interface

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    getnim command getnim - NIM's Command Line Interface This page describes the inquiry-only command called getnim that users can use interactively and in scripts to get their account balances. GETNIM(l) NERSC GETNIM(l) NAME getnim - query the NERSC banking database for remaining allocation, resources and repository information SYNOPSIS getnim [ options ] -Rrname or getnim [ options ] -Rrname { -uuid | -Uuname } or getnim [ options ][ -D ] { -uuid | -Uuname } or getnim [ options ] -Rrname { -l | -L

  11. DAKOTA JAGUAR 3.0 user's manual.

    SciTech Connect (OSTI)

    Adams, Brian M.; Bauman, Lara E; Chan, Ethan; Lefantzi, Sophia; Ruthruff, Joseph R.

    2013-05-01

    JAGUAR (JAva GUi for Applied Research) is a Java software tool providing an advanced text editor and graphical user interface (GUI) to manipulate DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) input specifications. This document focuses on the features necessary to use JAGUAR.

  12. AMBER User's Manual

    SciTech Connect (OSTI)

    Vay, J.L.; Fawley, W.

    2000-11-08

    AMBER is a Particle-In-Cell (PIC) code which models the evolution of a representative slice of a relativistic electron beam in a linear accelerator. The beam is modeled as a steady flow and therefore no electromagnetic waves: all the fields (external and self-fields) are electrostatic and magnetostatic fields (for a complete description, see chapter 5). The possible elements describing the accelerator lattice are solenoids, accelerating gaps, pipes and apertures. Several kinds of beam distribution can be loaded: KV, gaussian, semi-gaussian, etc. Alternatively, the user can reconstruct (or load) a distribution from the output of another codefile, for example, an interface generating the beam distribution from output produced from EGUN or LSP codes is available as an option. This documentation first describes in detail the input files needed to run AMBER and the procedure to start the executable. The possible data files and graphical output are explained in the two following chapters. The last chapter describes the physics model and numerical techniques used. An example of input files and the result obtained with these inputs are also given in the Appendix.

  13. Franklin: User Experiences

    SciTech Connect (OSTI)

    National Energy Research Supercomputing Center; He, Yun; Kramer, William T.C.; Carter, Jonathan; Cardo, Nicholas

    2008-05-07

    The newest workhorse of the National Energy Research Scientific Computing Center is a Cray XT4 with 9,736 dual core nodes. This paper summarizes Franklin user experiences from friendly early user period to production period. Selected successful user stories along with top issues affecting user experiences are presented.

  14. Managing Your User Account

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Managing Your Account Managing Your User Account Use the NERSC Information Management (NIM) system to customize your user account and keep your personal information up-to-date. See the NIM User's Guide, especially the "Managing Your User Account with NIM" section. Last edited: 2016-04-29 11:35:06

  15. ALS User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting October 3-5, 2011 Lawrence Berkeley National Laboratory, California

  16. NIF User Group

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    group NIF User Group The National Ignition Facility User Group provides an organized framework and independent vehicle for interaction between the scientists who use NIF for "Science Use of NIF" experiments and NIF management. Responsibility for NIF and the research programs carried out at NIF resides with the NIF Director. The NIF User Group advises the NIF Director on matters of concern to users, as well as providing a channel for communication for NIF users with funding agencies and

  17. National User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    National User Facilities Our Vision National User Facilities Research Areas In Focus Global Solutions ⇒ Navigate Section Our Vision National User Facilities Research Areas In Focus Global Solutions Berkeley Lab's User Facilities-Engines of Discovery Berkeley Lab's User Facilities provide state-of-the-art resources for scientists across the nation and around the world. About 10,000 researchers a year use these facilities, representing nearly one third of the total for all Department of Energy

  18. Mechanical interface having multiple grounded actuators

    DOE Patents [OSTI]

    Martin, Kenneth M.; Levin, Mike D.; Rosenberg, Louis B.

    1998-01-01

    An apparatus and method for interfacing the motion of a user-manipulable object with a computer system includes a user object physically contacted or grasped by a user. A 3-D spatial mechanism is coupled to the user object, such as a stylus or a medical instrument, and provides three degrees of freedom to the user object. Three grounded actuators provide forces in the three degrees of freedom. Two of the degrees of freedom are a planar workspace provided by a closed-loop linkage of members, and the third degree of freedom is rotation of the planar workspace provided by a rotatable carriage. Capstan drive mechanisms transmit forces between actuators and the user object and include drums coupled to the carriage, pulleys coupled to grounded actuators, and flexible cables transmitting force between the pulleys and the drums. The flexibility of the cable allows the drums to rotate with the carriage while the pulleys and actuators remain fixed to ground. The interface also may include a floating gimbal mechanism coupling the linkage to the user object. The floating gimbal mechanism includes rotatably coupled gimbal members that provide three degrees of freedom to the user object and capstan mechanisms coupled between sensors and the gimbal members for providing enhanced sensor resolution.

  19. Transportation Routing Analysis Geographic Information System (TRAGIS) User's Manual

    SciTech Connect (OSTI)

    Johnson, PE

    2003-09-18

    The Transportation Routing Analysis Geographic Information System (TRAGIS) model is used to calculate highway, rail, or waterway routes within the United States. TRAGIS is a client-server application with the user interface and map data files residing on the user's personal computer and the routing engine and network data files on a network server. The user's manual provides documentation on installation and the use of the many features of the model.

  20. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Establish a User Agreement Establish a User Agreement Print Wednesday, 26 August 2009 16:00 User Agreements are Required Before a user group can begin their research at the ALS, a User Agreement between Berkeley Lab and the user's sponsoring organization must be signed. Many organizations already have a signed agreement, however if your organization has not established an agreement, please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view

  1. Establish a User Agreement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Establish a User Agreement Print User Agreements are Required Before a user group can begin their research at the ALS, a User Agreement between Berkeley Lab and the user's sponsoring organization must be signed. Many organizations already have a signed agreement, however if your organization has not established an agreement, please send an email to This e-mail address is being protected from spambots. You need JavaScript enabled to view it to set one up. The User Agreement is valid for up to

  2. Recommending personally interested contents by text mining, filtering, and interfaces

    SciTech Connect (OSTI)

    Xu, Songhua

    2015-10-27

    A personalized content recommendation system includes a client interface device configured to monitor a user's information data stream. A collaborative filter remote from the client interface device generates automated predictions about the interests of the user. A database server stores personal behavioral profiles and user's preferences based on a plurality of monitored past behaviors and an output of the collaborative user personal interest inference engine. A programmed personal content recommendation server filters items in an incoming information stream with the personal behavioral profile and identifies only those items of the incoming information stream that substantially matches the personal behavioral profile. The identified personally relevant content is then recommended to the user following some priority that may consider the similarity between the personal interest matches, the context of the user information consumption behaviors that may be shown by the user's content consumption mode.

  3. Recommending personally interested contents by text mining, filtering, and interfaces

    DOE Patents [OSTI]

    xu, Songhua

    2015-11-05

    A personalized content recommendation system includes a client interface device configured to monitor a user's information data stream. A collaborative filter remote from the client interface device generates automated predictions about the interests of the user. A database server stores personal behavioral profiles and user's preferences based on a plurality of monitored past behaviors and an output of the collaborative user personal interest inference engine. A programmed personal content recommendation server filters items in an incoming information stream with the personal behavioral profile and identifies only those items of the incoming information stream that substantially matches the personal behavioral profile. The identified personally relevant content is then recommended to the user following some priority that may consider the similarity between the personal interest matches, the context of the user information consumption behaviors that may be shown by the user's content consumption mode.

  4. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    facility. Thorough discussion with users of current projects, as well as plans for the future, will place ALS management in a better position to evaluate the needs of users and...

  5. OSG New User Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 ...

  6. User Financial Account Form

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2/20/13 User Financial Account Form Establish a user financial account at SLAC to procure gases, chemicals, supplies or services to support your experiment at SLAC's user facilities and to send samples, dewars, or other equipment between SLAC and your institution. To open or renew your SLAC user financial account, complete and submit this form along with a Purchase Order (PO) from your institution. The PO should be made to SLAC National Accelerator Laboratory for the amount of estimated

  7. 2011 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 User Meeting Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The 2011 ALS User Meeting begins registation begins at 07:30 on Monday, October 3, outside the Building 50 Auditorium. The meeting itself will start at 08:25 inside the Building 50 Auditorium; all plenary sessions will also be held at

  8. LANSCE | Users | LUG | Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Charter I. NAME The name of this organization shall be the Los Alamos Neutron Science Center (LANSCE) User Group. II. PURPOSE The purpose of the LANSCE User Group (LUG) is to: * Provide a formal channel for the exchange of information between LANSCE management and the researchers who use the facilities. * Supply a vehicle for users of LANSCE to transmit concerns and recommendations to the LANSCE management about operating policy, facilities, and other matters affecting the user community. *

  9. Human-computer interface incorporating personal and application domains

    DOE Patents [OSTI]

    Anderson, Thomas G.

    2011-03-29

    The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.

  10. Human-computer interface incorporating personal and application domains

    DOE Patents [OSTI]

    Anderson, Thomas G.

    2004-04-20

    The present invention provides a human-computer interface. The interface includes provision of an application domain, for example corresponding to a three-dimensional application. The user is allowed to navigate and interact with the application domain. The interface also includes a personal domain, offering the user controls and interaction distinct from the application domain. The separation into two domains allows the most suitable interface methods in each: for example, three-dimensional navigation in the application domain, and two- or three-dimensional controls in the personal domain. Transitions between the application domain and the personal domain are under control of the user, and the transition method is substantially independent of the navigation in the application domain. For example, the user can fly through a three-dimensional application domain, and always move to the personal domain by moving a cursor near one extreme of the display.

  11. User Program | Prospective Users Non-US

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Click on the "User Satisfaction Survey" link on the "main menu" page. If you don't have an account you will need to create one. Your login ID (username and email) is the same as ...

  12. US NDC Modernization Iteration E2 Prototyping Report: User Interface...

    Office of Scientific and Technical Information (OSTI)

    science and technology. A paper copy of this document is also available for sale to the public from the National Technical Information Service, Springfield, VA at www.ntis.gov....

  13. XOP : a graphical user interface for spectral calculations and...

    Office of Scientific and Technical Information (OSTI)

    Resource Relation: Journal Name: Review of Scientific Instruments; Journal Volume: 66; Journal Issue: 9; Other Information: PBD: Sep 1996; Related Information: Sep. 1996 Research ...

  14. US NDC Modernization Iteration E2 Prototyping Report: User Interface...

    Office of Scientific and Technical Information (OSTI)

    Abstract not provided. Authors: Lewis, Jennifer E. ; Melanie A. Palmer ; Vickers, James Wallace ; Ellen M. Voegtli Publication Date: 2014-12-01 OSTI Identifier: 1173206...

  15. Monthly PDSF User Meeting Minutes

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Policies User Surveys NERSC Users Group User Announcements Help Staff Blogs Request Repository Mailing List Operations for: Passwords & Off-Hours Status...

  16. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 ALS User Meeting Awards Print Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User...

  17. 2012 ALS User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 ALS User Meeting Awards Recipients of the 2012 Users' Executive Committee awards and Student Poster Competition were announced Tuesday, October 9, at the ALS User Meeting. David...

  18. Web Service Interface (API)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) ...

  19. Web Browser Interface (WBUI)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Web Browser Interface (WBUI) Web Service Interface (API) ...

  20. PIA - Advanced Test Reactor National Scientific User Facility Users Week

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2009 | Department of Energy Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 PIA - Advanced Test Reactor National Scientific User Facility Users Week 2009 (316.78 KB) More Documents & Publications PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL Education Programs Business Enclav

  1. IceT users' guide and reference.

    SciTech Connect (OSTI)

    Moreland, Kenneth D.

    2011-01-01

    The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

  2. LANSCE | User Resources | User Satisfaction Survey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Satisfaction Survey We hope that your research at the Los Alamos Neutron Science Center was productive and successful. Your feedback is important to the Department of Energy and us. Please take a few minutes to respond to the questions on the following page. Your assessment of your experience at LANSCE is used by DOE to evaluate and fund the facility, by the User Group Executive Committee to determine issues and to make recommendations to address them, and by the management and staff of

  3. 2015 CAMD Users Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CAMD 2015 Symposium followed by the CAMD Users' Meeting SAXS Workshop Thursday, April 23th, 2015 CAMD, 6980 Jefferson Highway, Baton Rouge, LA 70806 CAMD 2015 Symposium followed by the CAMD Users' Meeting Friday, April 24th, 2015 LTRC Transportation Training and Education Center (Map) The CAMD 2015 Symposium followed by the CAMD Users' Meeting will be held on Friday, April 24th at the LTRC Transportation Training and Education Center, 4099 Gourrier Avenue, Baton Rouge, LA 70808, directly behind

  4. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Executive Committee ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing

  5. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General User Proposals (GUPs) General User Proposals (GUPs) Print Tuesday, 01 June 2010 09:36 General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research Team (PRT) that operates the beamline. Before Submitting a Proposal Review the ALS Beamlines Directory to learn about the research capabilities of individual beamlines at the ALS. Contact the beamline scientist or the local contact listed in

  6. Shifter: User Defined Images

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Shifter: User Defined Images Shifter: User Defined Images Shifter: Bringing Linux containers to HPC NERSC is working to increase flexibility and usability of its HPC systems by enabling Docker-like Linux container technology. Linux containers allow an application to be packaged with its entire software stack - including some portions of the base OS files - as well defining needed user environment variables and application "entry point.". Containers may provide an abstract way of

  7. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS User Meeting Archives Print Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact

  8. 2011 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee The 2011 ALS User Meeting begins registation begins at 07:30 on Monday, October 3, outside the Building 50 Auditorium. The meeting itself will start at 08:25 inside the Building 50 Auditorium; all plenary sessions will also be held at this location.

  9. 2011 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2011 User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Workshops will follow the end of the plenary sessions on Tuesday and continue through Wednesday.When registering , you will be asked to select the workshop that you plan to attend; this helps organizers plan room assignments and

  10. 2012 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops 2012 ALS User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Advanced Characterization of Critical Magnetic Materials Catherine Jenkins, Peter Fischer, Elke Arenholz, and David Shuh (LBNL) 67-3111 (Wed.) Automating Tomographic Data Analysis: Transfer, Storage, Processing, and Simulation Dula

  11. LANSCE | User Resources

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    From the initial proposal process to the completion of the experiment, LANSCE provides its users with resources critical to their experiements and their experience. Lujan Resources pRad Resources WNR Resources Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Submit a proposal for beam time Visit Registration Schedules

  12. Users from Industry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users from Industry Users from Industry Print The Advanced Light Source (ALS) welcomes industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, and/or provide economic benefits and jobs to the economy. The nature of industrial research can be different from traditional university and government sponsored projects, so the ALS has created unique opportunities for new and existing industrial

  13. 2013 User Meeting Awards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 User Meeting Awards Recipients of the 2013 Users' Executive Committee awards and the Student Poster Competition awards, were presented Tuesday, October 8, at the ALS User Meeting. David A. Shirley Award for Outstanding Scientific Achievement at the ALS 2013-shirley The David A. Shirley Award for Scientific Achievement went to Harald Ade, North Carolina State University, "For achievements in polymer science and in particular the elucidation of the chemical nano-morphology of complex

  14. Manufactured Home Energy Audit user`s manual

    SciTech Connect (OSTI)

    1997-09-01

    The Manufactured Home Energy Audit (MHEA) is a software tool that predicts manufactured home energy consumption and recommends weatherization retrofit measures. It was developed to assist local weatherization agencies working with the US Department of Energy (DOE) Weatherization Assistance Program. Whether new or experienced, employed within or outside the Weatherization Assistance Program, all users can benefit from incorporating MHEA into their manufactured home weatherization programs. DOE anticipates that the state weatherization assistance programs that incorporate MHEA into their programs will find significant growth in the energy and cost savings achieved from manufactured home weatherization. The easy-to-use MHEA displays a colorful, graphical interface for entering simple inputs and provides understandable, usable results. The user enters information about the manufactured home construction, heating equipment, cooling equipment, and weather site. MHEA then calculates annual energy consumption using a simplified building energy analysis technique. MHEA stands apart from other building energy analysis tools in many ways. Calculations incorporated into the computer code specifically address manufactured home heating and cooling load trends. The retrofit measures evaluated by MHEA are all applicable to manufactured homes. Help messages describe common manufactured home weatherization practices as well as provide hints on how to install retrofit measures. These and other features help make MHEA easy to use when evaluating energy consumption and the effects of weatherization retrofit measures for manufactured homes.

  15. 2001 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Questions and Changes from Previous Years NERSC Information Management (NIM) System Web and Communications Hardware Resources Software Training User Services Comments about...

  16. User account | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Log in(active tab) Logon Help User login Username * JLAB/CUE Username Password * JLAB/CUE Password Log in

  17. User Liaison Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Liaison Please upgrade your browser. This site's design is only visible in a graphical browser that supports web standards, but its content is accessible to any browser. ...

  18. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Standards and Technology (NIST) and he is working towards developing novel scanning force probes using cavity optomechanics. Research Highlights CNMS User Newsletter Page 7...

  19. About the User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    . All proposals are reviewed for scientific merit by the Program Advisory Committee (PAC). In the case of proprietary proposals, such as the case for Industry, users pay for...

  20. Users from Industry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    industrial users from large and small companies whose projects advance scientific knowledge, investigate the development of new products and manufacturing methods, andor...

  1. 2014 NERSC User Survey

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Survey 2014 NERSC User Survey December 17, 2014 by Francesca Verdier Please take a few minutes to fill out NERSC's annual user survey. Your feedback is important because it allows us to judge the quality of our services, give DOE information on how we are doing, and point us to areas in which we can improve. The survey is on the web at the URL: https://www.nersc.gov/news-publications/publications-reports/user-surveys/2014/ and covers the allocation year 2014. Subscribe via RSS Subscribe

  2. 2004 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    13 | Next 2004 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction, Importance and Usefulness...

  3. 2005 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 | Next 2005 User Survey Results Table of Contents Response Summary Respondent Demographics All Satisfaction, Importance and Usefulness Ratings Hardware Resources Software...

  4. 2003 User Survey Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10 | Next 2003 User Survey Results Table of Contents Response Summary Respondent Demographics Overall Satisfaction and Importance All Satisfaction Topics and Changes from...

  5. 2012 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops Print 2012 ALS User Meeting Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from...

  6. 2012 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 User Meeting Agenda Print Agenda Home Agenda Awards Exhibitors Lodging Posters Registration Transportation Workshops This e-mail address is being protected from spambots. You...

  7. LANSCE | Training Office | User Training

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    phone: 505.665.1010 mesa header Beam Status Accelerator Ops (Internal) Operating Schedule Long Range Operating Schedule User Resources User Agreements Proposals Visit Registration Schedules Experiment Reports User Satisfaction Survey Reviews Users User Office User Program LANSCE User Group Rosen Scholar Rosen Prize News & Multimedia News Multimedia Events Profiles Highlights Seminars Activity Reports The Pulse User Program Headlines About LANSCE History Leadership LINAC Outreach Affiliations

  8. EFFECT e-learning courses | Open Energy Information

    Open Energy Info (EERE)

    tools User Interface: Spreadsheet Website: www.esmap.orgesmapEFFECT Cost: Free Language: English References: EFFECT e-learning courses1 The EFFECT Model is an Excel-based,...

  9. Proceedings: Graphics interface '86/Vision interface '86

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    This book contains papers presented at the Graphics interface conference. The Graphics interface conference is a major forum for the presentation of research in computer graphics and human-computer interaction. Sponsored by the Canadian Man-Computer Communications Society, the conferene draws an international audience with papers presented from France, Great Britain, the United States and Canada. The 1986 meeting was held jointly with Vision Interface '86, sponsored by the Canadian Image Processing and Pattern Recognition Society.

  10. KDYNA user's manual

    SciTech Connect (OSTI)

    Levatin, J.A.L.; Attia, A.V.; Hallquist, J.O.

    1990-09-28

    This report is a complete user's manual for KDYNA, the Earth Sciences version of DYNA2D. Because most features of DYNA2D have been retained in KDYNA much of this manual is identical to the DYNA2D user's manual.

  11. AIRMaster+ User Manual | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User Manual AIRMaster+ User Manual This user manual is designed to help users understand the AIRMaster+ compressed air software. AIRMaster+ User Manual (2000) (2.39

  12. User`s guide to MIDAS

    SciTech Connect (OSTI)

    Tisue, S.A.; Williams, N.B.; Huber, C.C.; Chun, K.C.

    1995-12-01

    Welcome to the MIDAS User`s Guide. This document describes the goals of the Munitions Items Disposition Action System (MIDAS) program and documents the MIDAS software. The main text first describes the equipment and software you need to run MIDAS and tells how to install and start it. It lists the contents of the database and explains how it is organized. Finally, it tells how to perform various functions, such as locating, entering, viewing, deleting, changing, transferring, and printing both textual and graphical data. Images of the actual computer screens accompany these explanations and guidelines. Appendix A contains a glossary of names for the various abbreviations, codes, and chemicals; Appendix B is a list of modem names; Appendix C provides a database dictionary and rules for entering data; and Appendix D describes procedures for troubleshooting problems associated with connecting to the MIDAS server and using MIDAS.

  13. LANSCE | Users | LUG

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LUG-EC 2016 LUG EC Meeting 2015 LUG EC Meeting 2014 LUG EC Summary and Charge 2014 LUG EC Meeting 2013 LUG EC Meeting LUG Charter LUG Election LUG 2015 Meeting LUG 2012 Meeting Rosen Scholar Rosen Prize Users dotline LANSCE User Group (LUG) 2016 LUG Executive Committee Election Election is now closed. Thank you for voting! Results will be announced soon. The Executive Committee of the LANSCE User Group (LUG-EC) is seeking new representatives to serve on the Executive Committee beginning CY 2016.

  14. Implementing virtual reality interfaces for the geosciences

    SciTech Connect (OSTI)

    Bethel, W.; Jacobsen, J.; Austin, A.; Lederer, M.; Little, T.

    1996-06-01

    For the past few years, a multidisciplinary team of computer and earth scientists at Lawrence Berkeley National Laboratory has been exploring the use of advanced user interfaces, commonly called {open_quotes}Virtual Reality{close_quotes} (VR), coupled with visualization and scientific computing software. Working closely with industry, these efforts have resulted in an environment in which VR technology is coupled with existing visualization and computational tools. VR technology may be thought of as a user interface. It is useful to think of a spectrum, ranging the gamut from command-line interfaces to completely immersive environments. In the former, one uses the keyboard to enter three or six-dimensional parameters. In the latter, three or six-dimensional information is provided by trackers contained either in hand-held devices or attached to the user in some fashion, e.g. attached to a head-mounted display. Rich, extensible and often complex languages are a vehicle whereby the user controls parameters to manipulate object position and location in a virtual world, but the keyboard is the obstacle in that typing is cumbersome, error-prone and typically slow. In the latter, the user can interact with these parameters by means of motor skills which are highly developed. Two specific geoscience application areas will be highlighted. In the first, we have used VR technology to manipulate three-dimensional input parameters, such as the spatial location of injection or production wells in a reservoir simulator. In the second, we demonstrate how VR technology has been used to manipulate visualization tools, such as a tool for computing streamlines via manipulation of a {open_quotes}rake.{close_quotes} The rake is presented to the user in the form of a {open_quotes}virtual well{close_quotes} icon, and provides parameters used by the streamlines algorithm.

  15. Review of Literature for Inputs to the National Water Savings Model and Spreadsheet Tool-Commercial/Institutional

    SciTech Connect (OSTI)

    Whitehead, Camilla Dunham; Melody, Moya; Lutz, James

    2009-05-29

    Lawrence Berkeley National Laboratory (LBNL) is developing a computer model and spreadsheet tool for the United States Environmental Protection Agency (EPA) to help estimate the water savings attributable to their WaterSense program. WaterSense has developed a labeling program for three types of plumbing fixtures commonly used in commercial and institutional settings: flushometer valve toilets, urinals, and pre-rinse spray valves. This National Water Savings-Commercial/Institutional (NWS-CI) model is patterned after the National Water Savings-Residential model, which was completed in 2008. Calculating the quantity of water and money saved through the WaterSense labeling program requires three primary inputs: (1) the quantity of a given product in use; (2) the frequency with which units of the product are replaced or are installed in new construction; and (3) the number of times or the duration the product is used in various settings. To obtain the information required for developing the NWS-CI model, LBNL reviewed various resources pertaining to the three WaterSense-labeled commercial/institutional products. The data gathered ranged from the number of commercial buildings in the United States to numbers of employees in various sectors of the economy and plumbing codes for commercial buildings. This document summarizes information obtained about the three products' attributes, quantities, and use in commercial and institutional settings that is needed to estimate how much water EPA's WaterSense program saves.

  16. NGDS User Centered Design Meeting the Needs of the Geothermal Community

    SciTech Connect (OSTI)

    Boyd, Suzanne; Zheng, Sam; Patten, Kim; Blackman, Harold

    2013-10-01

    In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineer- ing the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been research based, highly collabora- tive, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

  17. NGDS USER CENTERED DESIGN MEETING THE NEEDS OF THE GEOTHERMAL COMMUNITY

    SciTech Connect (OSTI)

    Boyd, Suzanne; Zheng, Sam Xianjun; Patten, Kim; Blackman, Harold

    2013-12-23

    In order to ensure the widest and greatest utility of IT and software projects designed for geothermal reservoir engineering the full consideration of end users’ task and workflow needs must be evaluated. This paper describes the user-centered design (UCD) approach taken in the development of a user interface (UI) solution for the National Geothermal Data System (NGDS). This development process has been researched based, highly collaborative, and incorporates state-of-the-art practices to ensure a quality user experience. Work is continuing on the interface, including future usability tests to further refine the interfaces as the overall system is developed.

  18. NERSC Usage and User Demographics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage Demographics Users and Projects Through the Years Careers Visitor Info Web Policies Home » About » Usage and User Demographics NERSC Usage and User Demographics Usage Demographics Number of NERSC Users and Projects Through the Years Number of NERSC Users and Projects Through the Years Read More » Last edited: 2015-03-02 16:21:25

  19. User' Software Manual

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MM-Group Home MMG Advisory Committees 4-ID-D Home Recent Publications Beamline Info Optics Instrumentation Software User Info FAQs 4-ID-D Beamline Software Manual Introduction...

  20. User Liaison Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Office Space User space is available in the ARC, reserve space here. arc-thumb.jpg Click to see Virtual Tour 12000 Jefferson Avenue, Newport News, VA 23606 Phone: (757) 269-7255...

  1. User account | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Error message Access denied. You must log in to view this page. Log in(active tab) Logon Help User login Username * JLAB/CUE Username Password * JLAB/CUE Password Log in

  2. ARM User Survey Report

    SciTech Connect (OSTI)

    Roeder, LR

    2010-06-22

    The objective of this survey was to obtain user feedback to, among other things, determine how to organize the exponentially growing data within the Atmospheric Radiation Measurement (ARM) Climate Research Facility, and identify users’ preferred data analysis system. The survey findings appear to have met this objective, having received approximately 300 responses that give insight into the type of work users perform, usage of the data, percentage of data analysis users might perform on an ARM-hosted computing resource, downloading volume level where users begin having reservations, opinion about usage if given more powerful computing resources (including ability to manipulate data), types of tools that would be most beneficial to them, preferred programming language and data analysis system, level of importance for certain types of capabilities, and finally, level of interest in participating in a code-sharing community.

  3. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    systems. Access is provided at no cost to users for research that is in the public do- main and intended for publica on in the open literature. The submission deadline is...

  4. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M08: Databases and Data analytic frameworks at NERSC June 16, 2014 | Author(s): Yushu Yao, NERSC User Services Group | Download File: M08-20140616-NERSC-Data-Forum-DB-SciDB-Talk-v2...

  5. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentations User Data Forum Presentations Sort by: Default | Name | Date (low-high) | ... M02: The Future of Data and Scientific Workflow June 16, 2014 | Author(s): Michael Wilde, ...

  6. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or until the number of shifts recommended by the Proposal Study Panels (PSP) for the life of the proposal have been used. Users may decide whether to submit a new proposal or...

  7. CNMS User Newsletter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    at the 4th annual Na onal User Facility Science Expo for the U.S. House of Representa ves in the foyer of the Ray- burn House Office Building, Capitol Hill Washington D.C.....

  8. 2012 User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the Amorphous-to-Crystalline Transitions in CaCO3 Biominerals, with 20-nm Resolution Pupa Gilbert, University of Wisconsin 13:55 User Services Update Sue Bailey, LBNL 14:10...

  9. User Accounts (Logins)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A user is given a username (also known as a login name) and associated password that permits them to access NERSC resources. This usernamepassword pair may be used by a single ...

  10. NIM Guide for Users

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The NERSC Information Management (NIM) system is a web portal that contains user, login ... Logging In To log into the NIM system, point your web browser to the URL http:...

  11. Programs & User Facilities

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science Programs » Office of Science » Programs & User Facilities Programs & User Facilities Enabling remarkable discoveries, tools that transform our understanding of energy and matter and advance national, economic, and energy security Advanced Scientific Computing Research Applied Mathematics Co-Design Centers Exascale Co-design Center for Materials in Extreme Environments (ExMatEx) Center for Exascale Simulation of Advanced Reactors (CESAR) Center for Exascale Simulation of

  12. VOLTTRON: User Guide

    SciTech Connect (OSTI)

    Lutes, Robert G.; Katipamula, Srinivas; Akyol, Bora A.; Tenney, Nathan D.; Haack, Jereme N.; Monson, Kyle E.; Carpenter, Brandon J.

    2014-04-24

    This document is a user guide for the deployment of the Transactional Network platform and agent/application development within the VOLTTRON. The intent of this user guide is to provide a description of the functionality of the Transactional Network Platform. This document describes how to deploy the platform, including installation, use, guidance, and limitations. It also describes how additional features can be added to enhance its current functionality.

  13. New Users Guide

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Storing and Retrieving Data Advanced Usage Examples Charging Storage Statistics Troubleshooting I/O Resources for Scientific Applications at NERSC Optimizing I/O performance on the Lustre file system I/O Formats Science Databases Sharing Data Transferring Data Unix Groups at NERSC Unix File Permissions Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List

  14. General User Proposals (GUPs)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General User Proposals (GUPs) Print General Users are granted beam time through a peer review proposal process. They may use beamlines and endstations provided by the ALS or the Participating Research Team (PRT) that operates the beamline. Before Submitting a Proposal Review the ALS Beamlines Directory to learn about the research capabilities of individual beamlines at the ALS. Contact the beamline scientist or the local contact listed in the tables, for additional information about the

  15. ALS User Meeting Archives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meeting Archives Past User Meeting Programs, Workshops, and Awards Year David A. Shirley (Science) Klaus Halbach (Instrumentation) Tim Renner (Service) 2015 Program Workshops Wanli Yang, "For new concepts optimizing battery materials with the aid of soft x-ray microscopy." Hans Bechtel, Michael Martin, and Markus Raschke, "For the development of Synchrotron Infrared Nano Spectroscopy (SINS)." David Malone. "As the first person all 2400 ALS users contact for their beam

  16. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  17. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will be in

  18. ALS Users' Association Charter

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ALS Users' Association Charter Print The purpose of the Advanced Light Source Users' Association (ALSUA) is to provide an organized framework for the interaction between those who use the Advanced Light Source (ALS) at the Lawrence Berkeley Laboratory (LBL) for their research and the ALS management, as well as to provide a channel for communication with other synchrotron radiation laboratories and, on suitable occasions, with federal agencies. The ALSUA, representing the research workers, will

  19. 2011 User Meeting Workshops

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workshops Home Agenda Awards Exhibitors Lodging Posters Registration Photo Contest Transportation Workshops This e-mail address is being protected from spambots. You need JavaScript enabled to view it User Meeting Archives Users' Executive Committee Workshops will follow the end of the plenary sessions on Tuesday and continue through Wednesday.When registering , you will be asked to select the workshop that you plan to attend; this helps organizers plan room assignments and refreshments.

  20. JLF User Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    program JLF User Program The Jupiter Laser Facility User Program is open to all qualified applicants; US and non-US PIs are welcome to submit proposals. A proposal is necessary for shot-time allocated on the Titan, Janus, and COMET laser platforms at JLF. Using technical evaluations from experts, proposals will be reviewed and ranked by the JLF Advisory Committee based on scientific and/or programmatic quality, impact, and feasibility. Typically, all platforms are overrequested by a factor of

  1. LANSCE | User Resources | Schedules

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Schedules You will be notified of your experiment schedule at least 3-6 weeks prior to your start date. Two (2) weeks post-review, beam-time will be scheduled by the Instrument Scientist in consultation with the user. Three (3) weeks post review, schedule letters are sent to the Principal Investigator. After scheduling experiments, the LANSCE User Office will contact you to determine and schedule applicable training, assist with travel arrangements, initiate and required foreign national access

  2. LANSCE | Users | Rosen Prize

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Rosen Prize Current Recipient Past Recipients Call for Nominations Users dotline The Louis Rosen Prize Adam T. Holley Adam T. Holley Named 24th Rosen Prize Recipient The LANSCE User Group Executive Committee is pleased to announce that Adam Holley has been awarded the 2013 Rosen Prize for his doctoral thesis on "Ultracold Neutron Polarimetry in a Measurement of the β Asymmetry". His work demonstrated excellence in a number of facets the selection committee considered, including

  3. LANSCE | Users | LUG | Topical User Meeting Agenda

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Agenda (some presentations are included below) Sunday 4:00pm-6:00pm Registration: Best Western Monday 7:30am Registration: LANSCE, Bldg 1 Facility Presentations | LANSCE, Rosen Auditorium 8:15am-8:22am LANSCE User Group Executive Committee Welcome: Steve Conradson 2011 LUG-EC Chair 8:23am-8:30am Worshop Goals/Processes Kurt Schoenberg LANSCE Facility Director 8:30am-9:00am LANSCE Overview and Future Opportunities Kurt Schoenberg LANSCE Facility Director 9:00am-9:30am Nuclear Neutron Science at

  4. Synesteer Final Report for "User Friendly Steering and Diagnostics for Modeling Heavy Ion Fusion Accelerators"

    SciTech Connect (OSTI)

    Stoltz, Peter; Dechow, Doug; Kruger, Scott; Granger, Brian

    2007-10-15

    The goal accomplished in this project was to improve the Synergia code by improving the integration of the Impact space charge algorithms into Synergia and improving the graphical user interface for analyzing results. We accomplished five tasks along these lines: (i) a refactoring of the Impact space charge algorithm to make it more accessible by other codes, (ii) development of the Forthon interface between Impact and Python, (iii) implementation of a Python-MPI interface to allow parallel space charge calculation, (iv) a new user-friendly interface for analyzing Synergia results, and (v) a toolkit for doing parallel analysis of Synergia results.

  5. Restoration Prioritization Toolset: Documentation and Users Guides 2007

    SciTech Connect (OSTI)

    Judd, Chaeli; Woodruff, Dana L.; Thom, Ronald M.; Anderson, Michael G.; Borde, Amy B.

    2007-10-26

    This users guide provides technical background and details on the Restoration Prioritization Toolset developed for GoMRC as well as instructions for use.

  6. 2011 NERSC User Survey (Read Only)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2010/2011 User Survey Results Survey Text 2009/2010 User Survey Results 2008/2009 User Survey Results 2007/2008 User Survey Results 2006 User Survey Results 2005 User Survey Results 2004 User Survey Results 2003 User Survey Results 2002 User Survey Results 2001 User Survey Results 2000 User Survey Results 1999 User Survey Results 1998 User Survey Results HPC Requirements for Science HPC Workshop Reports NERSC Staff Publications & Presentations Journal Cover Stories Galleries facebook icon

  7. NERSC User Announcements RSS Feed

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Announcements RSS Feed NERSC User Announcements RSS Feed June 30, 2014 by Richard Gerber NERSC's User Announcements (not these "Featured Announcements") are now available as an RSS...

  8. User account | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User account User account Primary tabs Log in Request new password(active tab) Username or e-mail address * E-mail new password

  9. Human perceptual deficits as factors in computer interface test and evaluation

    SciTech Connect (OSTI)

    Bowser, S.E.

    1992-06-01

    Issues related to testing and evaluating human computer interfaces are usually based on the machine rather than on the human portion of the computer interface. Perceptual characteristics of the expected user are rarely investigated, and interface designers ignore known population perceptual limitations. For these reasons, environmental impacts on the equipment will more likely be defined than will user perceptual characteristics. The investigation of user population characteristics is most often directed toward intellectual abilities and anthropometry. This problem is compounded by the fact that some deficits capabilities tend to be found in higher-than-overall population distribution in some user groups. The test and evaluation community can address the issue from two primary aspects. First, assessing user characteristics should be extended to include tests of perceptual capability. Secondly, interface designs should use multimode information coding.

  10. NERSC Users Learn Code Optimization Tips and Tricks at 1st Hackathon

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    were able to follow along and pose questions via a chat interface. "This was a great learning opportunity for users who are trying to figure out how to optimize their codes...