Powered by Deep Web Technologies
Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Powder River Energy Corporation | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder River Energy Corporation Place: Sundance,

2

COAL QUALITY AND GEOCHEMISTRY, POWDER RIVER BASIN, WYOMING AND MONTANA  

E-Print Network [OSTI]

in the Powder River Basin in Wyoming and Montana (fig. PQ-1) is considered to be "clean coal." For the location

3

Powder River Energy Corporation Smart Grid Project | Open Energy  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilips ColorLoading map...ClimatePowder River

4

Powder River, Wyoming: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power IncPowder River Energy Corporation Place:

5

Powder River Energy Corporation (Montana) | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating Solar Powerstories onFocusOskiPhilips ColorLoading map...ClimatePowder River Energy

6

A comparison of groundwater recharge estimation methods in the Williston and Powder River structural basins in the Northern Great Plains  

E-Print Network [OSTI]

A comparison of groundwater recharge estimation methods in the Williston and Powder River-water-balance (SWB) model to estimate groundwater recharge in the Williston and Powder River structural basins

Torgersen, Christian

7

Groundwater recharge estimates for the Powder River and Williston structural basins Katherine R. Aurand and Andrew J. Long  

E-Print Network [OSTI]

Groundwater recharge estimates for the Powder River and Williston structural basins Katherine R Cretaceous aquifer system in the Powder River and Williston structural basins. The study area covers about 75 production in the Powder River structural basin and oil production in the Williston structural basin

Torgersen, Christian

8

Paleotopography and hydrocarbon accumulation: Williston, Powder River, and Denver basins  

SciTech Connect (OSTI)

Recent geomorphic analyses of 1:24,000 scale topographic maps in the three major basins of the northern Great Plains have disclosed a persistent system of basement paleotopographic features that trend north-northeast throughout the region. Superimposed across this system and subtly influenced by it, are the northwesterly trending Laramide structural features. Paleozoic depositional patterns have been strongly influenced by the paleoridge and trough system formed by the north-northeast features. Mesozoic deposition has also been affected by the ancient subsurface system but in a more subtle manner. Many of the Paleozoic and Mezoxoic hydrocarbon locations in the three basins appear to be the results of paleotopographic control on hydrocarbon accumulation sites. This affect ranges from Paleozoic reef sites in the Williston basin through paleotrough localization of Pennsylvanian Minnelusa production in the Powder River basin to fractured Cretaceous Niobrara production at the Silo field in the Denver basin. Basement paleotopography is the underlying factor in all deposition and subsequent hydrocarbon migration in any basin. As such, it should be considered a major factor in the exploration for oil and gas.

Thomas, G.E. (Thomas and Associates, Denver, CO (United States))

1991-06-01T23:59:59.000Z

9

Hydrocarbon trapping mechanisms in the Miller Creek area of the Powder River Basin, Wyoming  

E-Print Network [OSTI]

'' 1975 43'W'79 ABSTRACT Hydrocarbon Trapoing Mechanisms in the Miller Creek Area of the Powder River Basin, Wyoming. (May 1975) Jennifer Ann Armstrong, B. S. , University of Texas at Austin Chairman of Advisory Committee: 17r. Robert. R. Berg...

Armstrong, Jennifer Ann

1975-01-01T23:59:59.000Z

10

Groundwater recharge estimates using a soil-water-balance model for the Powder River and Williston structural basins  

E-Print Network [OSTI]

Groundwater recharge estimates using a soil-water-balance model for the Powder River and Williston for the lower Tertiary and Upper Cretaceous aquifer system in the Powder River and Williston structural basins in the Williston structural basin will require trillions of gallons of water from this aquifer system over the next

Torgersen, Christian

11

Without proper controls, consolidation could influence performance in the Powder River Basin  

SciTech Connect (OSTI)

The American coal industry is in a period of consolidation. Fewer firms with larger production are replacing a more dispersed industry. Because of the southern Powder River Basin's great importance as source of coal, there is a need to monitor the performance of southern PRB coal producers.

Bierman, S.; Nelson, P.

2005-08-01T23:59:59.000Z

12

FORT UNION COAL IN THE POWDER RIVER BASIN, WYOMING AND MONTANA: A SYNTHESIS  

E-Print Network [OSTI]

...................................................................................PS-18 Coal-Bed Methane ResourceChapter PS FORT UNION COAL IN THE POWDER RIVER BASIN, WYOMING AND MONTANA: A SYNTHESIS By R of selected Tertiary coal beds and zones in the Northern RockyMountains and Great Plains region, U

13

Economic Analysis of Carbon Dioxide Sequestration in Powder River Basin Coal  

SciTech Connect (OSTI)

Unminable coalbeds are potentially large storage reservoirs for the sequestration of anthropogenic CO2 and offer the benefit of enhanced methane production, which can offset some of the costs associated with CO2 sequestration. The objective of this paper is to study the economic feasibility of CO2 sequestration in unminable coal seams in the Powder River Basin of Wyoming. Economic analyses of CO2 injection options are compared. Results show that injecting flue gas to recover methane from CBM fields is marginally economical; however, this method will not significantly contribute to the need to sequester large quantities of CO2. Separating CO2 from flue gas and injecting it into the unminable coal zones of the Powder River Basin seam is currently uneconomical, but can effectively sequester over 86,000 tons (78,200 tonne) of CO2 per acre while recovering methane to offset costs. The cost to separate CO2 from flue gas was identified as the major cost driver associated with CO2 sequestration in unminable coal seams. Improvements in separations technology alone are unlikely to drive costs low enough for CO2 sequestration in unminable coal seams in the Powder River Basin to become economically viable. Breakthroughs in separations technology could aid the economics, but in the Powder River Basin they cannot achieve the necessary cost reductions for breakeven economics without incentives.

Eric P. Robertson

2009-01-01T23:59:59.000Z

14

COAL RESOURCES, POWDER RIVER BASIN By M.S. Ellis,1  

E-Print Network [OSTI]

, Delaware 1999 Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky in the toolbar to return. 1999 Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky resources in the Powder River Basin reported by 7.5-minute quadrangle map area 1999 Resource assessment

15

SHERIDAN COALFIELD, POWDER RIVER BASIN: GEOLOGY, COAL QUALITY, AND COAL RESOURCES  

E-Print Network [OSTI]

Chapter PH SHERIDAN COALFIELD, POWDER RIVER BASIN: GEOLOGY, COAL QUALITY, AND COAL RESOURCES By M assessment of selected Tertiary coal beds and zones in the Northern RockyMountains and Great Plains region, U Resource assessment of selected Tertiary coal beds and zones in the Northern Rocky Mountains and Great

16

Coalbed methane potential of the Greater Green River, Piceance, Powder River, and Raton Basins. Topical report, January 1991-July 1991  

SciTech Connect (OSTI)

Coalbed methane potential of the Greater Green River, Piceance, Powder River, and Raton Basins was evaluated in the context of geologic and hydrologic characteristics identified in the San Juan Basin, the nation's leading coalbed methane producing basin. The major comparative criteria were (1) coalbed methane resources, (2) geologic and hydrologic factors that predict areas of high gas producibility and high coalbed reservoir permeability, and (3) coalbed thermal maturity. The technical criteria were expanded to include structure, depositional systems, and data base and then combined with economic criteria (production, industry activity, and pipeline availability) to evaluate the coalbed methane potential of the basins. The Greater Green River and Piceance Basins have primary potential to make a significant near-term contribution to the nation's gas supply. These basins have large gas resources, high-rank coals, high gas contents, and established coalbed methane production. The Greater Green River Basin has numerous coalbed methane targets, good coal-seam permeability, and extensive hydrologic areas favorable for production. The Powder River and Raton Basins were judged to have secondary potential. Coal beds in the Powder River Basin are thermally immature and produce large volumes of water; the Raton Basin has a poor data base and has no gas pipeline infrastructure. Low production and minimal industry activity further limit the near-term potential of the Raton Basin. However, if economic criteria are discounted and only major technical criteria are considered, the Greater Green River and Raton Basins are assigned primary potential. The Raton Basin's shallow, thermally mature coal beds of good permeability are attractive coalbed methane targets, but low coal-seam permeability limits the coalbed methane potential of the Piceance Basin.

Tyler, R.; Ambrose, W.A.; Scott, A.R.; Kaiser, W.R.

1991-12-01T23:59:59.000Z

17

Groundwater and surface water supplies in the Williston and Powder River structural basins are necessary for future development in these regions. To help determine  

E-Print Network [OSTI]

#12;i Abstract Groundwater and surface water supplies in the Williston and Powder River structural of streams, and quantify reservoir interaction in the Williston and Powder River structural basins the loss to underlying aquifers was 7790 ft3 /s. Both the Powder River and Williston basins contain gaining

Torgersen, Christian

18

QER - Comment of Powder River Energy Corporation | Department of Energy  

Office of Environmental Management (EM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15,2015 | DepartmentLoans | Department of Energy20 1 196Powder

19

What explains the increased utilization of Powder River Basin coal in electric power generation?  

SciTech Connect (OSTI)

This article examines possible explanations for increased utilization of Powder River Basin (PRB) coal in electric power generation that occurred over the last two decades. Did more stringent environmental policy motivate electric power plants to switch to less polluting fuels? Or, did greater use of PRB coal occur because relative price changes altered input markets in favor of this fuel. A key finding is that factors other than environmental policy such as the decline in railroad freight rates together with elastic demand by power plants were major contributors to the increased utilization of this fuel.

Gerking, S.; Hamilton, S.F. [University of Central Florida, Orlando, FL (United States)

2008-11-15T23:59:59.000Z

20

Multi-Seam Well Completion Technology: Implications for Powder River Basin Coalbed Methane Production  

SciTech Connect (OSTI)

The purpose of this study is to evaluate the potential benefits of applying multiseam [well] completion (MSC) technology to the massive stack of low-rank coals in the Powder River Basin. As part of this, the study objectives are: Estimate how much additional CBM resource would become accessible and technically recoverable--compared to the current practice of drilling one well to drain a single coal seam; Determine whether there are economic benefits associated with MSC technology utilization (assuming its widespread, successful application) and if so, quantify the gains; Briefly examine why past attempts by Powder River Basin CBM operators to use MSC technology have been relatively unsuccessful; Provide the underpinnings to a decision whether a MSC technology development and/or demonstration effort is warranted by DOE. To a great extent, this assessment builds on the previously published study (DOE, 2002), which contains many of the key references that underlie this analysis. It is available on the U.S. Department of Energy, National Energy technology Laboratory, Strategic Center for Natural Gas website (www.netl.doe.gov/scng). It is suggested that readers obtain a copy of the original study to complement the current report.

Office of Fossil Energy; National Energy Technology Laboratory

2003-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Challenges in assessment, management and development of coalbed methane resources in the Powder River Basin, Wyoming  

SciTech Connect (OSTI)

Coalbed methane development in the Powder River Basin has accelerated rapidly since the mid-1990's. forecasts of coalbed methane (CBM) production and development made during the late 1980's and early 1990's have proven to be distinctly unreliable. Estimates of gas in place and recoverable reserves have also varied widely. This lack of reliable data creates challenges in resource assessment, management and development for public resource management agencies and the CBM operators. These challenges include a variety of complex technical, legal and resource management-related issues. The Bureau of Land Management's Wyoming Reservoir Management Group (WRMG) and US Geological Survey (USGS), with the cooperation and assistance of CBM operators and other interested parties have initiated cooperative studies to address some of these issues. This paper presents results of those studies to date and outlines the agencies' goals and accomplishments expected at the studies' conclusion.

McGarry, D.E.

2000-07-01T23:59:59.000Z

22

Reservoir Characterization of Coals in the Powder River Basin, Wyoming, USA, to Test the Feasibility of CO2 Sequestration  

E-Print Network [OSTI]

sequestration capacity, and whether enhanced coalbed methane recovery (ECBM) will offset the cost is to investigate the feasibility of sequestering CO2 in unmineable coalbeds of the Powder River Basin (PRB recovery through enhanced methane production. Summary Reservoir Characterization Preliminary Results for CO

Stanford University

23

Groundwater availability and flow processes in the Williston and Powder River basins in the Northern Great Plains  

E-Print Network [OSTI]

Groundwater availability and flow processes in the Williston and Powder River basins, OK The recent oil and gas development in the Williston structural basin (containing the Bakken will be used to develop inputs to a numerical model of groundwater flow in the Williston structural basin

Torgersen, Christian

24

Powder River Basin Coalbed Methane Development and Produced Water Management Study  

SciTech Connect (OSTI)

Coalbed methane resources throughout the entire Powder River Basin were reviewed in this analysis. The study was conducted at the township level, and as with all assessments conducted at such a broad level, readers must recognize and understand the limitations and appropriate use of the results. Raw and derived data provided in this report will not generally apply to any specific location. The coal geology in the basin is complex, which makes correlation with individual seams difficult at times. Although more than 12,000 wells have been drilled to date, large areas of the Powder River Basin remain relatively undeveloped. The lack of data obviously introduces uncertainty and increases variability. Proxies and analogs were used in the analysis out of necessity, though these were always based on sound reasoning. Future development in the basin will make new data and interpretations available, which will lead to a more complete description of the coals and their fluid flow properties, and refined estimates of natural gas and water production rates and cumulative recoveries. Throughout the course of the study, critical data assumptions and relationships regarding gas content, methane adsorption isotherms, and reservoir pressure were the topics of much discussion with reviewers. A summary of these discussion topics is provided as an appendix. Water influx was not modeled although it is acknowledged that this phenomenon may occur in some settings. As with any resource assessment, technical and economic results are the product of the assumptions and methodology used. In this study, key assumptions as well as cost and price data, and economic parameters are presented to fully inform readers. Note that many quantities shown in various tables have been subject to rounding; therefore, aggregation of basic and intermediate quantities may differ from the values shown.

Advanced Resources International

2002-11-30T23:59:59.000Z

25

The key to minimizing minesite versus utility laboratory analyses on Powder River Basin coals  

SciTech Connect (OSTI)

Powder River Basin (PRB) coals are continuing to expand their areas of use into regions previously reserved for higher ranked coals. PRB coals are subbituminous by rank. Inherent moisture values of 25 to 30 percent are the norm. PRB coals, being lower rank in nature, also tend to oxidize very easily. These factors combined produce a coal which can cause analysis problems for laboratories unaccustomed to PRB coals. In fact, even laboratories that deal with this type of coal on a daily basis can experience analytical difficulties. Special care needs to be taken by both minesite laboratory and the utility laboratory to ensure accurate analyses. Cooperation between both parties is the key to reproducible analyses. Only by working together can parties fully analyze the situation and develop analytical methods acceptable to both. This paper will describe the methods employed by the Caballo Rojo Mine (CRM) and the Georgia Power Company (GPC) to resolve laboratory analysis differences found during shipments by CRM to GPC beginning in 1994. The following topics are discussed: initial comparative results, analytical investigations, the cooperative process, recent comparative results, and conclusions.

Rexin, M.G.

1995-08-01T23:59:59.000Z

26

The production of a premium solid fuel from Powder River Basin coal  

SciTech Connect (OSTI)

This report describes our initial evaluation of a process designed to produce premium-quality solid fuel from Powder River Basin (PRB) coal. The process is based upon our experience gained by producing highly-reactive, high-heating-value char as part of a mild-gasification project. In the process, char containing 20 to 25 wt % volatiles and having a gross heating value of 12,500 to 13,000 Btu/lb is produced. The char is then contacted by coal-derived liquid. The result is a deposit of 6 to 8 wt % pitch on the char particles. The lower boiling component of the coal-derived liquid which is not deposited on the char is burned as fuel. Our economic evaluation shows the process will be economically attractive if the product can be sold for about $20/ton or more. Our preliminary tests show that we can deposit pitch on to the char, and the product is less dusty, less susceptible to readsorption of moisture, and has reduced susceptibility to self heating.

Merriam, N.; Sethi, V.; Thomas, K.; Grimes, R.W.

1992-09-01T23:59:59.000Z

27

The production of a premium solid fuel from Powder River Basin coal. [COMPCOAL Process  

SciTech Connect (OSTI)

This report describes our initial evaluation of a process designed to produce premium-quality solid fuel from Powder River Basin (PRB) coal. The process is based upon our experience gained by producing highly-reactive, high-heating-value char as part of a mild-gasification project. In the process, char containing 20 to 25 wt % volatiles and having a gross heating value of 12,500 to 13,000 Btu/lb is produced. The char is then contacted by coal-derived liquid. The result is a deposit of 6 to 8 wt % pitch on the char particles. The lower boiling component of the coal-derived liquid which is not deposited on the char is burned as fuel. Our economic evaluation shows the process will be economically attractive if the product can be sold for about $20/ton or more. Our preliminary tests show that we can deposit pitch on to the char, and the product is less dusty, less susceptible to readsorption of moisture, and has reduced susceptibility to self heating.

Merriam, N.; Sethi, V.; Thomas, K.; Grimes, R.W.

1992-01-01T23:59:59.000Z

28

Powder River Basin coalbed methane: The USGS role in investigating this ultimate clean coal by-product  

SciTech Connect (OSTI)

For the past few decades, the Fort Union Formation in the Powder River Basin has supplied the Nation with comparatively clean low ash and low sulfur coal. However, within the past few years, coalbed methane from the same Fort Union coal has become an important energy by-product. The recently completed US Geological Survey coal resource assessment of the Fort Union coal beds and zones in the northern Rocky Mountains and Great Plains (Fort Union Coal Assessment Team, 1999) has added useful information to coalbed methane exploration and development in the Powder River Basin in Wyoming and Montana. Coalbed methane exploration and development in the Powder River Basin has rapidly accelerated in the past three years. During this time more than 800 wells have been drilled and recent operator forecasts projected more than 5,000 additional wells to be drilled over the next few years. Development of shallow (less than 1,000 ft. deep) Fort Union coal-bed methane is confined to Campbell and Sheridan Counties, Wyoming, and Big Horn County, Montana. The purpose of this paper is to report on the US Geological Survey's role on a cooperative coalbed methane project with the US Bureau of Land Management (BLM), Wyoming Reservoir Management Group and several gas operators. This paper will also discuss the methodology that the USGS and the BLM will be utilizing for analysis and evaluation of coalbed methane reservoirs in the Powder River Basin. The USGS and BLM need additional information of coalbed methane reservoirs to accomplish their respective resource evaluation and management missions.

Stricker, G.D.; Flores, R.M.; Ochs, A.M.; Stanton, R.W.

2000-07-01T23:59:59.000Z

29

The Wyodak-Anderson coal assessment, Powder River Basin, Wyoming and Montana -- An ArcView project  

SciTech Connect (OSTI)

In 1997, more than 305 million short tons of clean and compliant coal were produced from the Wyodak-Anderson and associated coal beds and zones of the Paleocene Fort Union Formation in the Powder River Basin, Wyoming and Montana. To date, all coal produced from the Wyodak-Anderson, which averages 0.47 percent sulfur and 6.44 percent ash, has met regulatory compliance standards. Twenty-eight percent of the total US coal production in 1997 was from the Wyodak-Anderson coal. Based on the current consumption rates and forecast by the Energy Information Administration (1996), the Wyodak-Anderson coal is projected to produce 413 million short tons by the year 2016. In addition, this coal deposit as well as other Fort Union coals have recently been targeted for exploration and development of methane gas. New US Geological Survey (USGS) digital products could provide valuable assistance in future mining and gas development in the Powder River Basin. An interactive format, with querying tools, using ArcView software will display the digital products of the resource assessment of Wyodak-Anderson coal, a part of the USGS National Coal Resource Assessment of the Powder River Basin. This ArcView project includes coverages of the data point distribution; land use; surface and subsurface ownerships; coal geology, stratigraphy, quality and geochemistry; and preliminary coal resource calculations. These coverages are displayed as map views, cross sections, tables, and charts.

Flores, R.M.; Gunther, G.; Ochs, A.; Ellis, M.E.; Stricker, G.D.; Bader, L.R. [Geological Survey, Denver, CO (United States)

1998-12-31T23:59:59.000Z

30

A numerical soil-water-balance (SWB) model was used to estimate groundwater recharge in the Williston and Powder River structural basins in the Northern Great Plains.  

E-Print Network [OSTI]

in the Williston and Powder River structural basins in the Northern Great Plains. The SWB model consisted of 1 km2 to 2011. Average calculated recharge in the Williston basin was 0.190 in/yr (1,281 ft3 /sec) and ranged.1 percent of precipitation in the Williston basin. Average recharge in the Powder River basin was 0.136 in

Torgersen, Christian

31

Hardgrove grindability study of Powder River Basin and Appalachian coal components in the blend to a midwestern power station  

SciTech Connect (OSTI)

Five coals representing four distinct coal sources blended at a midwestern power station were subjected to detailed analysis of their Hardgrove grindability. The coals are: a low-sulfur, high volatile A bituminous Upper Elkhorn No. 3 coal (Pike County, KY); a medium-sulfur, high volatile A bituminous Pittsburgh coal (southwestern PA); a low-sulfur, subbituminous Wyodak coal from two mines in the eastern Powder River Basin (Campbell County, WY). The feed and all samples processed in the Hardgrove grindability test procedure were analyzed for their maceral and microlithotype content. The high-vitrinite Pittsburgh coal and the relatively more petrographically complex Upper Elkhorn No. 3 coal exhibit differing behavior in grindability. The Pittsburgh raw feed, 16x30 mesh fraction (HGI test fraction), and the {minus}30 mesh fraction (HGI reject) are relatively similar petrographically, suggesting that the HGI test fraction is reasonably representative of the whole feed. The eastern Kentucky coal is not as representative of the whole feed, the HGI test fraction having lower vitrinite than the rejected {minus}30 mesh fraction. The Powder River Basin coals are high vitrinite and show behavior similar to the Pittsburgh coal.

Padgett, P.L.; Hower, J.C. [Univ. of Kentucky, Lexington, KY (United States)

1996-12-31T23:59:59.000Z

32

Hydrodynamic flow in lower cretaceous muddy sandstone, Gas Draw field, Powder River basin, Wyoming  

SciTech Connect (OSTI)

Lower Cretaceous Muddy sandstones form a simple stratigraphic trap at Gas Draw field, northeast Power River Basin. The Muddy at Gas Draw can be subdivided into six zones. The lowest, sixth Muddy sandstone is fluvial in origin, and the overlying fifth sandstone is a transgressive marine deposit. The fourth zone represents a fluvial origin below to shallow marine above. The third zone is interpreted to be of fluvial-overbank origin with possibly a bay-lagoonal association. The second sandstone is suggested to be a deposit of a fluvial or deltaic environment. The first zone was deposited in a lagoonal and poorly-drained marsh environment. At Gas Draw, the second Muddy sandstone is the major producing zone and has the highest average porosity and permeability of 22.6% and 209 md. It had high initial production rates of up to 1200 BOPD (191 m/sup 3//day). From correlation of well logs, the Muddy reservoirs appear to be separated by thin shales, but analysis of drill stem tests show that these reservoirs are connected at some points within the area. Analysis of drill-stem test pressures provides the basis for interpreting fluid potential relationships. The average potentiometric gradient of 32 ft/mi across the field results in a hydrodynamic oil column of 210 feet, whereas capillary-pressure differences due to permeability changes can account for only 38 feet of oil column. The observed oil column over most of the field has a height somewhat greater than 250 feet which agrees well with total calculated oil column of about 248 feet. Furthermore, local decrease in permeability to oil may be responsible for water production at any place within the field, even updip from the producing area.

Lin, J.T.C.

1981-10-01T23:59:59.000Z

33

COMPCOAL{trademark}: A profitable process for production of a stable high-Btu fuel from Powder River Basin coal  

SciTech Connect (OSTI)

Western Research Institute (WRI) is developing a process to produce a stable, clean-burning, premium fuel from Powder River Basin (PRB) coal and other low-rank coals. This process is designed to overcome the problems of spontaneous combustion, dust formation, and readsorption of moisture that are experienced with PRB coal and with processed PRB coal. This process, called COMPCOAL{trademark}, results in high-Btu product that is intended for burning in boilers designed for midwestern coals or for blending with other coals. In the COMPCOAL process, sized coal is dried to zero moisture content and additional oxygen is removed from the coal by partial decarboxylation as the coal is contacted by a stream of hot fluidizing gas in the dryer. The hot, dried coal particles flow into the pyrolyzer where they are contacted by a very small flow of air. The oxygen in the air reacts with active sites on the surface of the coal particles causing the temperature of the coal to be raised to about 700{degrees}F (371{degrees}C) and oxidizing the most reactive sites on the particles. This ``instant aging`` contributes to the stability of the product while only reducing the heating value of the product by about 50 Btu/lb. Less than 1 scf of air per pound of dried coal is used to avoid removing any of the condensible liquid or vapors from the coal particles. The pyrolyzed coal particles are mixed with fines from the dryer cyclone and dust filter and the resulting mixture at about 600{degrees}F (316{degrees}C) is fed into a briquettor. Briquettes are cooled to about 250{degrees}F (121{degrees}C) by contact with a mist of water in a gas-tight mixing conveyor. The cooled briquettes are transferred to a storage bin where they are accumulated for shipment.

Smith, V.E.; Merriam, N.W.

1994-10-01T23:59:59.000Z

34

Characterization of the chemical variation of feed coal and coal combustion products from a power plant utilizing low sulfur Powder River Basin coal  

SciTech Connect (OSTI)

The US Geological Survey and the University of Kentucky Center for Applied Energy Research, in collaboration with an Indiana utility, are studying a coal-fired power plant burning Powder River Basin coal. This investigation involves a systematic study of the chemical and mineralogical characteristics of feed coal and coal combustion products (CCPs) from a 1,300-megawatt (MW) power unit. The main goal of this study is to characterize the temporal chemical variability of the feed coal, fly ash, and bottom ash by looking at the major-, minor-, and trace-element compositions and their associations with the feed coal mineralogy. Emphasis is also placed on the abundance and modes of occurrence of elements of potential environmental concern that may affect the utilization of these CCPs and coals.

Affolter, R.H.; Brownfield, M.E.; Cathcart, J.D.; Brownfield, I.K.

2000-07-01T23:59:59.000Z

35

Sulfur and ash in Paleocene Wyodak-Anderson coal in the Powder River Basin, Wyoming and Montana: A fuel source beyond 2000  

SciTech Connect (OSTI)

When coal-fired power plants are required by the Environmental Protection Agency (EPA) to meet more stringent sulfur emission standards (0.6 pound per million Btu) after the year 2000, most of the clean and compliant coals will come from the Powder River Basin in Wyoming and Montana. In 1996 more than 300 million short toms of these clean and compliant coals were produced from the Paleocene Fort Union Formation in the northern Rocky Mountains and Great Plans region. This is more than 30% of the total US coal production of 1.03 billion short tons in 1996. Future demand for clean and compliant coals can probably be met through production of more F or Union coals in the region. It is projected by the Energy Information Agency (1996) that most of the low-sulfur and low-ash coals in the northern Rocky Mountains and Great Plains region will be produced from the Wyodak-Anderson coal bed/zone of the Paleocene Fort Union Formation in the Powder River Basin. To date, coal produced from the Wyodak-Anderson coal bed/zone, containing 0.5% sulfur, 1.2 lb SO{sub 2} per million btu, and 6% ash (mean values on an as-received basis) meet current EPA regulatory compliance. This coal bed/zone alone produced 262 million short toms of >26% of the total US coal production in 1996. Based on the current consumption rates of coal and a forecast by the EIA (1996), the Wyodak-Anderson coals are projected to produce an additional 153 million short tons a year by the year 2016. At this rate of production, high quality Wyodak-Anderson coals may be adequate to fill future energy needs.

Ellis, M.S.; Stricker, G.D.; Flores, R.M.; Bader, L.R.

1998-07-01T23:59:59.000Z

36

Sulfur and ash in paleocene Wyodak-Anderson coal in the Powder River Basin, Wyoming and Montana: A fuel source beyond 2000  

SciTech Connect (OSTI)

When coal-fired power plants are required by the Environmental Protection Agency (EPA) to meet more stringent sulfur emission standards (0.6 pound per million Btu) after the year 2000, most of the clean and compliant coals will come from the Powder River Basin in Wyoming and Montana. In 1996 more than 300 million short tons of these clean and compliant coals were produced from the Paleocene Fort Union Formation in the northern Rocky Mountains and Great Plains region. This is more than 30 percent of the total US coal production of 1.03 billion short tons in 1996. Future demand for clean and compliant coals can probably be met through production of more Fort Union coals in the region. It is projected by the Energy Information Agency (1996) that most of the low-sulfur and low-ash coals in the northern Rocky Mountains and Great Plains region will be produced from the Wyodak-Anderson coal bed/zone of the Paleocene Fort Union Formation in the Powder River Basin. To date, coal produced from the Wyodak-Anderson coal bed/zone, containing 0.5 percent sulfur, 1.2 lb SO{sub 2} per million btu, and 6 percent ash (mean values on an as-received basis) meet current EPA regulatory compliance. This coal bed/zone alone produced 262 million short tons or >26 percent of the total U.S. coal production in 1996. Based on the current consumption rates of coal and a forecast by the EIA (1996), the Wyodak-Anderson coals are projected to produce an additional 153 million short tons a year by the year 2016. At this rate of production, high quality Wyodak-Anderson coals may be adequate to fill our future energy needs.

Ellis, M.S.; Stricker, G.D.; Flores, R.M.; Bader, L.R. [Geological Survey, Denver, CO (United States)

1998-04-01T23:59:59.000Z

37

Usage Demographics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics Usage Demographics

38

Using ground based geophysics to evaluate hydrogeologic effects of subsurface drip irrigation systems used to manage produced water in the Powder River Basin, Wyoming  

SciTech Connect (OSTI)

The U.S Department of Energy’s National Energy Technology Laboratory has been evaluating various geophysical methods for site characterization regarding environmental issues associated with fossil fuels including produced water management. A relatively new method of managing produced water from coal bed natural gas production is through subsurface drip irrigation. This system involves disposing the produced water near the bottom of the root zone in agricultural fields, which would provide a beneficial use of this resource. The focus of this paper is to present results from a pre-injection geophysical survey for site assessment and background data. A pre-construction survey of approximately 1.2 km2 was completed in June 2007 using a Geophex GEM-2 broadband sensor over six fields along the Powder River floodplain. Quality assurance measures included drift checks, duplicate line surveys, and repeat field surveys using the Geometrics OhmMapper instrument. Subsequent surveys will be completed once the system is installed and operational. Geophysical inversion models were completed to provide a detailed cross-section of the subsurface geoelectrical structure along each line. Preliminary interpretations reveal that the subsurface conductivity distribution correlates to geomorphologic features.

Sams, J.I.; Lipinski, B.A.; Veloski, G.A.

2008-04-01T23:59:59.000Z

39

Determining erodibility, critical shear stress, and allowable discharge estimates for cohesive channels: case study in the Powder River Basin of Wyoming  

SciTech Connect (OSTI)

The continuous discharge of coalbed natural gas-produced (CBNG-produced) water within ephemeral, cohesive channels in the Powder River Basin (PRB) of Wyoming can result in significant erosion. A study was completed to investigate channel stability in an attempt to correlate cohesive soil properties to critical shear stress. An in situ jet device was used to determine critical shear stress (tau{sub c}) and erodibility (k{sub d}); cohesive soil properties were determined following ASTM procedures for 25 reaches. The study sites were comprised of erodible to moderately resistant clays with tau{sub c} ranging from 0.11 to 15.35 Pa and k{sub d} ranging from 0.27 to 2.38 cm{sup 3}/N s. A relationship between five cohesive soil characteristics and tau{sub c} was developed and presented for use in deriving tau{sub c} for similar sites. Allowable discharges for CBNG-produced water were also derived using tau{sub c} and the tractive force method. An increase in the allowable discharge was found for channels in which vegetation was maintained. The information from this case study is critical to the development of a conservative methodology to establish allowable discharges while minimizing flow-induced instability.

Thoman, R.W.; Niezgoda, S.L. [Lowham Engineering LLC, Lander, WY (United States)

2008-12-15T23:59:59.000Z

40

Evaluation of Phytoremediation of Coal Bed Methane Product Water and Waters of Quality Similar to that Associated with Coal Bed Methane Reserves of the Powder River Basin, Montana and Wyoming  

SciTech Connect (OSTI)

U.S. emphasis on domestic energy independence, along with advances in knowledge of vast biogenically sourced coalbed methane reserves at relatively shallow sub-surface depths with the Powder River Basin, has resulted in rapid expansion of the coalbed methane industry in Wyoming and Montana. Techniques have recently been developed which constitute relatively efficient drilling and methane gas recovery and extraction techniques. However, this relatively efficient recovery requires aggressive reduction of hydrostatic pressure within water-saturated coal formations where the methane is trapped. Water removed from the coal formation during pumping is typically moderately saline and sodium-bicarbonate rich, and managed as an industrial waste product. Current approaches to coalbed methane product water management include: surface spreading on rangeland landscapes, managed irrigation of agricultural crop lands, direct discharge to ephermeral channels, permitted discharge of treated and untreated water to perennial streams, evaporation, subsurface injection at either shallow or deep depths. A Department of Energy-National Energy Technology Laboratory funded research award involved the investigation and assessment of: (1) phytoremediation as a water management technique for waste water produced in association with coalbed methane gas extraction; (2) feasibility of commercial-scale, low-impact industrial water treatment technologies for the reduction of salinity and sodicity in coalbed methane gas extraction by-product water; and (3) interactions of coalbed methane extraction by-product water with landscapes, vegetation, and water resources of the Powder River Basin. Prospective, greenhouse studies of salt tolerance and water use potential of indigenous, riparian vegetation species in saline-sodic environments confirmed the hypothesis that species such as Prairie cordgrass, Baltic rush, American bulrush, and Nuttall's alkaligrass will thrive in saline-sodic environments when water supplies sourced from coalbed methane extraction are plentiful. Constructed wetlands, planted to native, salt tolerant species demonstrated potential to utilize substantial volumes of coalbed methane product water, although plant community transitions to mono-culture and limited diversity communities is a likely consequence over time. Additionally, selected, cultured forage quality barley varieties and native plant species such as Quail bush, 4-wing saltbush, and seaside barley are capable of sustainable, high quality livestock forage production, when irrigated with coalbed methane product water sourced from the Powder River Basin. A consequence of long-term plant water use which was enumerated is elevated salinity and sodicity concentrations within soil and shallow alluvial groundwater into which coalbed methane product water might drain. The most significant conclusion of these investigations was the understanding that phytoremediation is not a viable, effective technique for management of coalbed methane product water under the present circumstances of produced water within the Powder River Basin. Phytoremediation is likely an effective approach to sodium and salt removal from salt-impaired sites after product water discharges are discontinued and site reclamation is desired. Coalbed methane product water of the Powder River Basin is most frequently impaired with respect to beneficial use quality by elevated sodicity, a water quality constituent which can cause swelling, slaking, and dispersion of smectite-dominated clay soils, such as commonly occurring within the Powder River Basin. To address this issue, a commercial-scale fluid-bed, cationic resin exchange treatment process and prototype operating treatment plant was developed and beta-tested by Drake Water Technologies under subcontract to this award. Drake Water Technologies secured U.S. Patent No. 7,368,059-B2, 'Method for removal of benevolent cations from contaminated water', a beta Drake Process Unit (DPU) was developed and deployed for operation in the Powder River Basin. First year operatio

James Bauder

2008-09-30T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Hydraulic fracturing and wellbore completion of coalbed methane wells in the Powder River Basin, Wyoming: Implications for water and gas production  

SciTech Connect (OSTI)

Excessive water production (more than 7000 bbl/month per well) from many coalbed methane (CBM) wells in the Powder River Basin of Wyoming is also associated with significant delays in the time it takes for gas production to begin. Analysis of about 550 water-enhancement activities carried out during well completion demonstrates that such activities result in hydraulic fracturing of the coal. Water-enhancement activities, consists of pumping 60 bbl of water/min into the coal seam during approximately 15 min. This is done to clean the well-bore and to enhance CBM production. Hydraulic fracturing is of concern because vertical hydraulic fracture growth could extend into adjacent formations and potentially result in excess CBM water production and inefficient depressurization of coals. Analysis of the pressure-time records of the water-enhancement tests enabled us to determine the magnitude of the least principal stress (S{sub 3}) in the coal seams of 372 wells. These data reveal that because S{sub 3} switches between the minimum horizontal stress and the overburden at different locations, both vertical and horizontal hydraulic fracture growth is inferred to occur in the basin, depending on the exact location and coal layer. Relatively low water production is observed for wells with inferred horizontal fractures, whereas all of the wells associated with excessive water production are characterized by inferred vertical hydraulic fractures. The reason wells with exceptionally high water production show delays in gas production appears to be inefficient depressurization of the coal caused by water production from the formations outside the coal. To minimize CBM water production, we recommend that in areas of known vertical fracture propagation, the injection rate during the water-enhancement tests should be reduced to prevent the propagation of induced fractures into adjacent water-bearing formations.

Colmenares, L.B.; Zoback, M.D. [Stanford University, Stanford, CA (United States). Dept. of Geophysics

2007-01-15T23:59:59.000Z

42

Usage by Job Size  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics UsageUsage by Job Size

43

Powder dispersion system  

DOE Patents [OSTI]

A powder dispersion method and apparatus comprising an air eductor and a powder dispensing syringe inserted into a suction connection of the air eductor.

Gorenz, Heather M. (Albuquerque, NM); Brockmann, John E. (Albuquerque, NM); Lucero, Daniel A. (Albuquerque, NM)

2011-09-20T23:59:59.000Z

44

Usage Statistics By Group  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics Usage

45

Scale-Up of Palladium Powder Production Process for Use in the Tritium Facility at Westinghouse, Savannah River, SC/Summary of FY99-FY01 Results for the Preparation of Palladium Using the Sandia/LANL Process  

SciTech Connect (OSTI)

Palladium used at Savannah River (SR) for process tritium storage is currently obtained from a commercial source. In order to understand the processes involved in preparing this material, SR is supporting investigations into the chemical reactions used to synthesize this material. The material specifications are shown in Table 1. An improved understanding of the chemical processes should help to guarantee a continued reliable source of Pd in the future. As part of this evaluation, a work-for-others contract between Westinghouse Savannah River Company and Ames Laboratory (AL) was initiated. During FY98, the process for producing Pd powder developed in 1986 by Dan Grove of Mound Applied Technologies, USDOE (the Mound muddy water process) was studied to understand the processing conditions that lead to changes in morphology in the final product. During FY99 and FY00, the process for producing Pd powder that has been used previously at Sandia and Los Alamos National Laboratories (the Sandia/LANL process) was studied to understand the processing conditions that lead to changes in the morphology of the final Pd product. During FY01, scale-up of the process to batch sizes greater than 600 grams of Pd using a 20-gallon Pfaudler reactor was conducted by the Iowa State University (ISU) Chemical Engineering Department. This report summarizes the results of FY99-FY01 Pd processing work done at AL and ISU using the Sandia/LANL process. In the Sandia/LANL process, Pd is dissolved in a mixture of nitric and hydrochloric acids. A number of chemical processing steps are performed to yield an intermediate species, diamminedichloropalladium (Pd(NH{sub 3}){sub 2}Cl{sub 2}, or DADC-Pd), which is isolated. In the final step of the process, the Pd(NH{sub 3}){sub 2}Cl{sub 2} intermediate is subsequently redissolved, and Pd is precipitated by the addition of a reducing agent (RA) mixture of formic acid and sodium formate. It is at this point that the morphology of the Pd product is determined. During FY99 and FY00, a study of how the characteristics of the Pd are affected by changes in processing conditions including the RA/Pd molar ratio, Pd concentration, mole fraction of formic acid (mf-FA) in the RA solution, reaction temperature, and mixing was performed. These parameters all had significant effects on the resulting values of the tap density (TD), BET surface area (SA), and Microtrac particle size (PS) distribution for the Pd samples. These effects were statistically modeled and fit in order to determine ranges of predicted experimental conditions that resulted in material that meets the requirements for the Pd powder to be used at SR. Although not statistically modeled, the method and rate of addition of the RA and the method and duration of stirring were shown to be significant factors affecting the product morphology. Instead of producing an additional statistical fit and due to the likely changes anticipated during scale-up of this processing procedure, these latter conditions were incorporated into a reproducible practical method of synthesis. Palladium powder that met the SR specifications for TD, BET SA, and Microtrac PS was reliably produced at batch sizes ranging from 25-100 grams. In FY01, scale-up of the Sandia/LANL process was investigated by the ISU Chemical Engineering Department for the production of 600-gram batches of Pd. Palladium that meets the SR specifications for TD, BET SA, and Microtrac PS has been produced using the Pfaudler reactor, and additional processing batches will be done during the remainder of FY01 to investigate the range of conditions that can be used to produce Pd powder within specifications. Palladium product samples were analyzed at AL and SR to determine TD and at SR to determine BET SA, Microtrac PS distribution, and Pd nodule size and morphology by scanning electron microscopy (SEM).

David P. Baldwin; Daniel S. Zamzow; R. Dennis Vigil; Jesse T. Pikturna

2001-08-24T23:59:59.000Z

46

NERSC Usage Demographics 2013  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSC Logos NERSC logosParallel I/O3 NERSC Usage

47

Usage Demographics 2010  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics Usage Demographics0

48

Usage Demographics 2011  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics Usage Demographics01

49

Usage Demographics 2011  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered energy consumption by sectorlongUpdates by DianeDemographics Usage Demographics012

50

CedarCreekanticlineCedarCreekanticline Yellowstone River  

E-Print Network [OSTI]

Principal Aquifer Systems in the Williston and Powder River Structural Basins, United States and Canada #12;Cover. Conceptual block diagram of groundwater flow in the Williston structural basin. #12;Conceptual Model of the Uppermost Principal Aquifer Systems in the Williston and Powder River Structural Basins

51

Precision powder feeder  

DOE Patents [OSTI]

A new class of precision powder feeders is disclosed. These feeders provide a precision flow of a wide range of powdered materials, while remaining robust against jamming or damage. These feeders can be precisely controlled by feedback mechanisms.

Schlienger, M. Eric (Albuquerque, NM); Schmale, David T. (Albuquerque, NM); Oliver, Michael S. (Sandia Park, NM)

2001-07-10T23:59:59.000Z

52

Aluminum powder metallurgy processing  

SciTech Connect (OSTI)

The objective of this dissertation is to explore the hypothesis that there is a strong linkage between gas atomization processing conditions, as-atomized aluminum powder characteristics, and the consolidation methodology required to make components from aluminum powder. The hypothesis was tested with pure aluminum powders produced by commercial air atomization, commercial inert gas atomization, and gas atomization reaction synthesis (GARS). A comparison of the GARS aluminum powders with the commercial aluminum powders showed the former to exhibit superior powder characteristics. The powders were compared in terms of size and shape, bulk chemistry, surface oxide chemistry and structure, and oxide film thickness. Minimum explosive concentration measurements assessed the dependence of explosibility hazard on surface area, oxide film thickness, and gas atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization processing conditions. The GARS aluminum powders were exposed to different relative humidity levels, demonstrating the effect of atmospheric conditions on post-atomization oxidation of aluminum powder. An Al-Ti-Y GARS alloy exposed in ambient air at different temperatures revealed the effect of reactive alloy elements on post-atomization powder oxidation. The pure aluminum powders were consolidated by two different routes, a conventional consolidation process for fabricating aerospace components with aluminum powder and a proposed alternative. The consolidation procedures were compared by evaluating the consolidated microstructures and the corresponding mechanical properties. A low temperature solid state sintering experiment demonstrated that tap densified GARS aluminum powders can form sintering necks between contacting powder particles, unlike the total resistance to sintering of commercial air atomization aluminum powder.

Flumerfelt, J.F.

1999-02-12T23:59:59.000Z

53

HYDROGEN USAGE AND STORAGE  

E-Print Network [OSTI]

It is thought that it will be useful to inform society and people who are interested in hydrogen energy. The study below has been prepared due to this aim can be accepted as an article to exchange of information between people working on this subject. This study has been presented to reader to be utilized as a “technical note”. Main Energy sources coal, petroleum and natural gas are the fossil fuels we use today. They are going to be exhausted since careless usage in last decades through out the world, and human being is going to face the lack of energy sources in the near future. On the other hand as the fossil fuels pollute the environment makes the hydrogen important for an alternative energy source against to the fossil fuels. Due to the slow progress in hydrogen’s production, storage and converting into electrical energy experience, extensive usage of Hydrogen can not find chance for applications in wide technological practices. Hydrogen storage stands on an important point in the development of Hydrogen energy Technologies. Hydrogen is volumetrically low energy concentration fuel. Hydrogen energy, to meet the energy quantity necessary for the nowadays technologies and to be accepted economically and physically against fossil fuels, Hydrogen storage technologies have to be developed in this manner. Today the most common method in hydrogen storage may be accepted as the high pressurized composite tanks. Hydrogen is stored as liquid or gaseous phases. Liquid hydrogen phase can be stored by using composite tanks under very high pressure conditions. High technology composite material products which are durable to high pressures, which should not be affected by hydrogen embrittlement and chemical conditions.[1

54

Powder River County Secondary Data Analysis  

E-Print Network [OSTI]

prevalence (Heart Attack) 5.5% 4.1% 6.0% All Sites Cancer 472.3 455.5 543.2 1 Community Health Data, MT. Heart Disease 2. Cancer 3. Unintentional Injuries** 1. Cancer 2. Heart Disease 3.CLRD* 1. Heart

Maxwell, Bruce D.

55

Powder River 0 20 40 KILOMETERS  

E-Print Network [OSTI]

° Gillette Miles City Birney Sheridan Buffalo Glenrock Glenrock Douglas Moorcroft Decker Colstrip Ashland

56

Multiple feed powder splitter  

DOE Patents [OSTI]

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2002-01-01T23:59:59.000Z

57

Multiple feed powder splitter  

DOE Patents [OSTI]

A device for providing uniform powder flow to the nozzles when creating solid structures using a solid fabrication system such as the directed light fabrication (DLF) process. In the DLF process, gas entrained powders are passed through the focal point of a moving high-power laser light which fuses the particles in the powder to a surface being built up in layers. The invention is a device providing uniform flow of gas entrained powders to the nozzles of the DLF system. The device comprises a series of modular splitters which are slidably interconnected and contain an integral flow control mechanism. The device can take the gas entrained powder from between one to four hoppers and split the flow into eight tubular lines which feed the powder delivery nozzles of the DLF system.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

58

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of ternary mixtures consisting of: Ni powder, Cu powder, and Al powder, Ni powder, Cr powder, and Al powder; Ni powder, W powder and Al powder; Ni powder, V powder, and Al powder; Ni powder, Mo powder, and Al powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-05T23:59:59.000Z

59

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-19T23:59:59.000Z

60

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-05-10T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-08-26T23:59:59.000Z

62

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-07-29T23:59:59.000Z

63

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2004-09-28T23:59:59.000Z

64

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-01-25T23:59:59.000Z

65

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goval, Amit; Williams, Robert K.; Kroeger, Donald M.

2005-06-07T23:59:59.000Z

66

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: at least 60 at % Ni powder and at least one of Cr powder, W powder, V powder, Mo powder, Cu powder, Al powder, Ce powder, YSZ powder, Y powder, Mg powder, and RE powder; the article having a fine and homogeneous grain structure; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2004-09-14T23:59:59.000Z

67

Ultrafine hydrogen storage powders  

DOE Patents [OSTI]

A method of making hydrogen storage powder resistant to fracture in service involves forming a melt having the appropriate composition for the hydrogen storage material, such, for example, LaNi.sub.5 and other AB.sub.5 type materials and AB.sub.5+x materials, where x is from about -2.5 to about +2.5, including x=0, and the melt is gas atomized under conditions of melt temperature and atomizing gas pressure to form generally spherical powder particles. The hydrogen storage powder exhibits improved chemcial homogeneity as a result of rapid solidfication from the melt and small particle size that is more resistant to microcracking during hydrogen absorption/desorption cycling. A hydrogen storage component, such as an electrode for a battery or electrochemical fuel cell, made from the gas atomized hydrogen storage material is resistant to hydrogen degradation upon hydrogen absorption/desorption that occurs for example, during charging/discharging of a battery. Such hydrogen storage components can be made by consolidating and optionally sintering the gas atomized hydrogen storage powder or alternately by shaping the gas atomized powder and a suitable binder to a desired configuration in a mold or die.

Anderson, Iver E. (Ames, IA); Ellis, Timothy W. (Doylestown, PA); Pecharsky, Vitalij K. (Ames, IA); Ting, Jason (Ames, IA); Terpstra, Robert (Ames, IA); Bowman, Robert C. (La Mesa, CA); Witham, Charles K. (Pasadena, CA); Fultz, Brent T. (Pasadena, CA); Bugga, Ratnakumar V. (Arcadia, CA)

2000-06-13T23:59:59.000Z

68

Iowa Powder Atomization Technologies  

SciTech Connect (OSTI)

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

None

2012-01-01T23:59:59.000Z

69

Iowa Powder Atomization Technologies  

ScienceCinema (OSTI)

The same atomization effect seen in a fuel injector is being applied to titanium metal resulting in fine titanium powders that are less than half the width of a human hair. Titanium melts above 3,000°F and is highly corrosive therefore requiring specialized containers. The liquid titanium is poured through an Ames Laboratory - USDOE patented tube which is intended to increase the energy efficiency of the atomization process, which has the ability to dramatically decrease the cost of fine titanium powders. This novel process could open markets for green manufacturing of titanium components from jet engines to biomedical implants.

None

2013-03-01T23:59:59.000Z

70

Dagstuhl Seminar 10141: Distributed Usage Control  

E-Print Network [OSTI]

Dagstuhl Seminar 10141: Distributed Usage Control Sandro Etalle1 , Alexander Pretschner2 , Ravi Sandhu3 , Marianne Winslett4 1 University of Twente, The Netherlands 2 Karlsruhe Institute of Technology Dagstuhl seminar 10141 on Distributed Usage Control. Keywords: Usage control, access control, data

Sandhu, Ravi

71

Grand Challenges in Data Usage Control  

E-Print Network [OSTI]

Grand Challenges in Data Usage Control Prof. Ravi Sandhu Institute for Cyber Security Prof. Ravi.ics.utsa.edu © Ravi Sandhu World-Leading Research with Real Grand Challenges in Data Usage Control . Ravi Sandhu is about tradeoffs confidentiality, integrity, availability, usage, privacy, cost, usability, productivity

Sandhu, Ravi

72

Reducing the Energy Usage of Oce Applications  

E-Print Network [OSTI]

Reducing the Energy Usage of OĆce Applications Jason Flinn 1 , Eyal de Lara 2 , M. Satyanarayanan 1 of the energy usage of Microsoft's PowerPoint application and show that adaptive policies can reduce energy research e#11;ort, no silver bullet for reducing energy usage has yet been found. Instead, a comprehensive

Flinn, Jason

73

usage_household2001.pdf  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) " ,"ClickPipelines AboutDecemberSteam Coal Import CostsLiquids Reserve Class3a.86,7 (ReleasedUsage

74

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO)

1998-01-01T23:59:59.000Z

75

Silicon nitride/silicon carbide composite powders  

DOE Patents [OSTI]

Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

Dunmead, Stephen D. (Midland, MI); Weimer, Alan W. (Midland, MI); Carroll, Daniel F. (Midland, MI); Eisman, Glenn A. (Midland, MI); Cochran, Gene A. (Midland, MI); Susnitzky, David W. (Midland, MI); Beaman, Donald R. (Midland, MI); Nilsen, Kevin J. (Midland, MI)

1996-06-11T23:59:59.000Z

76

Radiological Powder XRD | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115,PerformanceUsingFIB/SEM (Quanta)Powder

77

Powder XRD | EMSL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar Home Design PassivePostdoctoral Opportunities Are you Your CartPowder

78

River Thames River Thames  

E-Print Network [OSTI]

West Kent House Penge East Lower Sydenham Forest Hill Honor Oak Park Crofton Park Nunhead New CrossC BD A River Thames River Thames Waterloo & City Southwark Northwood Northwood Hills North Harrow Harrow- on-the-Hill Northwick Park Harrow & Wealdstone Headstone Lane Pinner Kenton Stanmore Canons Park

Delmotte, Nausicaa

79

Section 6 -Facilities Usage and Maintenance A. Facilities Usage and Maintenance  

E-Print Network [OSTI]

Section 6 - Facilities Usage and Maintenance A. Facilities Usage and Maintenance 1 be held financially responsible. Financial responsibility extends to abandoned belongings, excessive is not permitted under any circumstances. Storage facilities are provided in most student housing units for storing

Pantaleone, Jim

80

From Web Usage Statistics to Web Usage Analysis Georgios Paliouras,* Christos Papatheodorou,** Vangelis Karkaletsis,*  

E-Print Network [OSTI]

From Web Usage Statistics to Web Usage Analysis Georgios Paliouras,* Christos Papatheodorou and Telecommunications, ** Division of Applied Technologies, National Centre for Scientific Research (NCSR) "Demokritos with the extraction of meta-knowledge from the Web. In particular, knowledge about Web usage which is invaluable

Paliouras, George

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Computer Science MAPO: Mining API Usages from  

E-Print Network [OSTI]

Computer Science MAPO: Mining API Usages from Open Source Repositories Tao Xie Department of Computer Science North Carolina State University, USA Jian Pei Department of Computer Science Simon Fraser University, Canada ·http://ase.csc.ncsu.edu/ #12;Computer Science Learning API Usages is Challenging ·org

Xie, Tao

82

University of Florida Cell Phone Usage Log  

E-Print Network [OSTI]

University of Florida Cell Phone Usage Log Information below must be compared to the monthly statement provided by the cell phone service provider. It is required that this log be completed when of the last page of the usage log. Employee's Name:Business Device - Cell Phone Number: Printed Name

Sin, Peter

83

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic and/or reduced particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of all metals in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products. 7 figs.

Bhattacharya, R.

1998-08-04T23:59:59.000Z

84

Preparation of superconductor precursor powders  

DOE Patents [OSTI]

A process for the preparation of a precursor metallic powder composition for use in the subsequent formation of a superconductor. The process comprises the steps of providing an electrodeposition bath comprising an electrolyte medium and a cathode substrate electrode, and providing to the bath one or more soluble salts of one or more respective metals, such as nitrate salts of thallium, barium, calcium, and copper, which are capable of exhibiting superconductor properties upon subsequent appropriate treatment. The bath is continually energized to cause the metallic particles formed at the electrode to drop as a powder from the electrode into the bath, and this powder, which is a precursor powder for superconductor production, is recovered from the bath for subsequent treatment. The process permits direct inclusion of thallium in the preparation of the precursor powder, and yields an amorphous product mixed on an atomic scale to thereby impart inherent high reactivity. Superconductors which can be formed from the precursor powder include pellet and powder-in-tube products.

Bhattacharya, Raghunath (Littleton, CO); Blaugher, Richard D. (Evergreen, CO)

1995-01-01T23:59:59.000Z

85

Panel on Data Usage Management: Technology or Regulation?  

E-Print Network [OSTI]

1 Panel on Data Usage Management: Technology or Regulation? Prof. Ravi Sandhu Executive Director about data usage management Users Enterprises Researchers What can be done Technical Regulatory care about data usage management Users Enterprises Researchers What can be done Technical

Sandhu, Ravi

86

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm{sup 3} and an external surface area in the range of about 90 to 600 m{sup 2}/g is described. The silica powders are prepared by reacting a tetraalkyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders. 2 figs.

Harris, M.T.; Basaran, O.A.; Kollie, T.G.; Weaver, F.J.

1996-01-02T23:59:59.000Z

87

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1996-01-01T23:59:59.000Z

88

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2 /g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1994-01-01T23:59:59.000Z

89

Silica powders for powder evacuated thermal insulating panel and method  

DOE Patents [OSTI]

A powder evacuated thermal insulating panel using generally spherical and porous silica particles of a median size less than about 100 nanometers in diameter, a pour packing density of about 0.4 to 0.6 g/cm.sup.3 and an external surface area in the range of about 90 to 600 m.sup.2/ g is described. The silica powders are prepared by reacting a tetraakyl silicate with ammonia and water in an alcohol solvent, distilling the solution after the reaction to remove the ammonia and recover the alcohol. The resulting aqueous slurry was dried, ball-milled, and dried again to provide the silica particles with defined internal and external porosity. The nanometer size and the large external surface area of the silica particles along with the internal and external porosity of the silica particles provide powder evacuated thermal insulating panels with significantly higher R-values than obtainable using previously known silica powders.

Harris, Michael T. (Knoxville, TN); Basaran, Osman A. (Oak Ridge, TN); Kollie, Thomas G. (Oak Ridge, TN); Weaver, Fred J. (Knoxville, TN)

1995-01-01T23:59:59.000Z

90

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, where after the product may be sintered.

Janney, M.A.

1990-01-16T23:59:59.000Z

91

Method for molding ceramic powders  

DOE Patents [OSTI]

A method for molding ceramic powders comprises forming a slurry mixture including ceramic powder, a dispersant for the metal-containing powder, and a monomer solution. The monomer solution includes at least one multifunctional monomer, a free-radical initiator, and an organic solvent. The slurry mixture is transferred to a mold, and the mold containing the slurry mixture is heated to polymerize and crosslink the monomer and form a firm polymer-solvent gel matrix. The solid product may be removed from the mold and heated to first remove the solvent and subsequently remove the polymer, whereafter the product may be sintered.

Janney, Mark A. (Knoxville, TN)

1990-01-01T23:59:59.000Z

92

Material impacts on operational energy usage  

E-Print Network [OSTI]

Decisions regarding materials and construction of a building are made all the time in the architectural process, but thought is not always given to how those choices may affect the buildings ultimate energy usage and the ...

Love, Andrea, S.M. Massachusetts Institute of Technology

2011-01-01T23:59:59.000Z

93

Recent Trends in Car Usage in Advanced Economies - Slower Growth...  

Open Energy Info (EERE)

Trends in Car Usage in Advanced Economies - Slower Growth Ahead? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Recent Trends in Car Usage in Advanced Economies -...

94

Rotary powder feed through apparatus  

DOE Patents [OSTI]

A device for increasing the uniformity of solids within a solids fabrication system, such as a direct light fabrication (DLF) system in which gas entrained powders are passed through the focal point of a moving high-power light which fuses the particles in the powder to a surface being built up in layers. The invention provides a feed through interface wherein gas entrained powders input from stationary input lines are coupled to a rotating head of the fabrication system. The invention eliminates the need to provide additional slack in the feed lines to accommodate head rotation, and therefore reduces feed line bending movements which induce non-uniform feeding of gas entrained powder to a rotating head.

Lewis, Gary K. (Los Alamos, NM); Less, Richard M. (Los Alamos, NM)

2001-01-01T23:59:59.000Z

95

Neutron detectors comprising boron powder  

SciTech Connect (OSTI)

High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

Wang, Zhehui; Morris, Christopher; Bacon, Jeffrey Darnell; Makela, Mark F; Spaulding, Randy Jay

2013-05-21T23:59:59.000Z

96

Powder collection apparatus/method  

DOE Patents [OSTI]

Device for separating and collecting ultrafine atomized powder from the gas stream of a gas atomizing apparatus comprises a housing having an interior wall oriented at an angle relative to horizontal so as to form a downwardly converging, conical expansion chamber, an inlet conduit communicated to the expansion chamber proximate an upper region thereof for receiving the gas stream, and an outlet proximate a lower region of the expansion chamber. The inlet conduit is oriented at a compound inclined angle (with respect to horizontal) selected to promote separation and collection of powder from the gas stream in the expansion chamber. The compound angle comprises a first entrance angle that is greater than the angle of repose of the powder on the housing interior wall such that any powder accumulation in the inlet conduit tends to flow down the wall toward the outlet. The second angle is selected generally equal to the angle of the housing interior wall measured from the same horizontal plane so as to direct the gas stream into the expansion chamber generally tangent to the housing interior wall to establish a downward swirling gas stream flow in the expansion chamber. A powder collection container is communicated to the outlet of the expansion chamber to collect the powder for further processing. 4 figures.

Anderson, I.E.; Terpstra, R.L.; Moore, J.A.

1994-01-11T23:59:59.000Z

97

Estimating Usage Can Reduce the Stress of Social Networking  

E-Print Network [OSTI]

Estimating Usage Can Reduce the Stress of Social Networking Abstract Social networks participants with an objective measure of their social network usage and also asked them for a daily estimate of their usage over the previous 24 hours. Although their social network usage did not significantly change

Subramanian, Sriram

98

Powder River County, Montana: Energy Resources | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine:Plug Power Inc

99

University Town Management Office Town Green Usage  

E-Print Network [OSTI]

University Town Management Office Town Green Usage Background The UTown Management Office (UTMO the sustainability of the Green as the Office of Estate & Development (OED) has highlighted that the landscape consultant has advised that it would require about one year period for the soil to settle to its final level

Chaudhuri, Sanjay

100

Report on Activities And Usage Statistics of  

E-Print Network [OSTI]

of the Mobile Learning Portal, at mobilelearningportal.org. This Web site is a #12;Learning Technology CenterReport on Activities And Usage Statistics of Learning Technology Center Services and Facilities 2009-2010 #12;Learning Technology Center Review 2009-2010 December 2010 2 Report on Activities

Patzek, Tadeusz W.

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

VEHICLE USAGE AGREEMENT DEPARTMENT OF BIOLOGICAL SCIENCE  

E-Print Network [OSTI]

VEHICLE USAGE AGREEMENT DEPARTMENT OF BIOLOGICAL SCIENCE All drivers of vehicles must certify to the following: 1. I certify that I have a valid driver's license appropriate for the vehicle type and will abide belts. 2. I have read and understand the vehicle operating policies and procedures as defined

Ronquist, Fredrik

102

Polymer quenched prealloyed metal powder  

DOE Patents [OSTI]

A powder metallurgical process of preparing a sheet from a powder having an intermetallic alloy composition such as an iron, nickel or titanium aluminide. The sheet can be manufactured into electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 4 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.0.05% Zr .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Ni, .ltoreq.0.75% C, .ltoreq.0.1% B, .ltoreq.1% submicron oxide particles and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1% rare earth metal, and/or .ltoreq.3 % Cu. The process includes forming a non-densified metal sheet by consolidating a powder having an intermetallic alloy composition such as by roll compaction, tape casting or plasma spraying, forming a cold rolled sheet by cold rolling the non-densified metal sheet so as to increase the density and reduce the thickness thereof and annealing the cold rolled sheet. The powder can be a water, polymer or gas atomized powder which is subjecting to sieving and/or blending with a binder prior to the consolidation step. After the consolidation step, the sheet can be partially sintered. The cold rolling and/or annealing steps can be repeated to achieve the desired sheet thickness and properties. The annealing can be carried out in a vacuum furnace with a vacuum or inert atmosphere. During final annealing, the cold rolled sheet recrystallizes to an average grain size of about 10 to 30 .mu.m. Final stress relief annealing can be carried out in the B2 phase temperature range.

Hajaligol, Mohammad R. (Midlothian, VA); Fleischhauer, Grier (Midlothian, VA); German, Randall M. (State College, PA)

2001-01-01T23:59:59.000Z

103

Intradermal needle-free powdered drug injection  

E-Print Network [OSTI]

This thesis presents a new method for needle-free powdered drug injection. The design, construction, and testing of a bench-top helium-powered device capable of delivering powder to controllable depths within the dermis ...

Liu, John (John Hsiao-Yung)

2012-01-01T23:59:59.000Z

104

Water Usage Law, Major Water Users (Missouri)  

Broader source: Energy.gov [DOE]

Any water user with the capability to withdraw or divert 100,000 gallons or more per day from any stream, river, lake, well, spring or other water source must register and file for a permit for...

105

Monitoring the usage of a computer system  

SciTech Connect (OSTI)

Controlling the usage of computer systems particularly those operated for the federal government, is an important topic today. Audit requirements have grown to the point where they can be a significant burden to the proprietors of the system. The paper briefly mentions several proposals for responding to increased audit requirements and for monitoring a system to detect unauthorized activity. A technique is proposed for situations where the proscribed or the intended activity can be characterized in terms of program or system performance parameters. The design of a usage monitoring system is outlined. The design is based on enhancing the audit data provided by the monitored system, capturing the audit data in a separate system to protect it from user access, and implementing one of the audit trail analysis systems currently under development.

Bailey, D.J.

1987-11-01T23:59:59.000Z

106

MESOSCALE SIMULATIONS OF POWDER COMPACTION  

SciTech Connect (OSTI)

Mesoscale 3D simulations of shock compaction of metal and ceramic powders have been performed with an Eulerian hydrocode GEODYN. The approach was validated by simulating a well-characterized shock compaction experiment of a porous ductile metal. Simulation results using the Steinberg material model and handbook values for solid 2024 aluminum showed good agreement with experimental compaction curves and wave profiles. Brittle ceramic materials are not as well studied as metals, so a simple material model for solid ceramic (tungsten carbide) has been calibrated to match experimental compaction curves. Direct simulations of gas gun experiments with ceramic powders have been performed and showed good agreement with experimental data. The numerical shock wave profile has same character and thickness as that measured experimentally using VISAR. The numerical results show reshock states above the single-shock Hugoniot line as observed in experiments. We found that for good quantitative agreement with experiments 3D simulations are essential.

Lomov, Ilya; Fujino, Don; Antoun, Tarabay; Liu, Benjamin [Lawrence Livermore National Laboratory, P. O. Box 808, Livermore CA 94551 (United States)

2009-12-28T23:59:59.000Z

107

Usage Analysis with Natural Reduction Types David A. Wright  

E-Print Network [OSTI]

Usage Analysis with Natural Reduction Types David A. Wright Department of Computer Science be required several times. If a usage analysis can determine how many times it will be required, certain­time garbage collection and in­place update. This paper presents a method for deducing usage information

Baker-Finch, Clem

108

Time Regions and Effects for Resource Usage Analysis Naoki Kobayashi  

E-Print Network [OSTI]

Time Regions and Effects for Resource Usage Analysis Naoki Kobayashi Tokyo Institute of Technology combines the merits of two major previous approaches to type­based analysis of resource usage -- linear Types, E#ects, Program Analysis, Resource Usage 1. INTRODUCTION Various resources and library functions

Kobayashi, Naoki

109

A Logic Specification for Usage Control Xinwen Zhang, Jaehong Park  

E-Print Network [OSTI]

technologies, Trusted computing, etc. OM-AM Framework Usage Control System · Model examples: Access Matrix1 A Logic Specification for Usage Control Xinwen Zhang, Jaehong Park Francesco Parisi/object attributes, right} to {true, false} · Usage control decisions are based on authorization, obligations

Sandhu, Ravi

110

A Logic Specification for Usage Control Xinwen Zhang, Jaehong Park  

E-Print Network [OSTI]

DRM technologies, Trusted computing, etc. OM-AM Framework Usage Control System · Model examples1 A Logic Specification for Usage Control Xinwen Zhang, Jaehong Park Francesco Parisi of {subject/object attributes, right} to {true, false} · Usage control decisions are based on authorization

Sandhu, Ravi

111

Logical Model and Specification of Usage Control XINWEN ZHANG  

E-Print Network [OSTI]

Logical Model and Specification of Usage Control XINWEN ZHANG FRANCESCO PARISI-PRESICCE JAEHONG PARK RAVI SANDHU George Mason University The recent usage control model (UCON) is a foundation for next mutability. A usage control decision is determined by combining authorizations, obligations, and conditions

Sandhu, Ravi

112

Time Regions and Effects for Resource Usage Analysis Naoki Kobayashi  

E-Print Network [OSTI]

Time Regions and Effects for Resource Usage Analysis Naoki Kobayashi Tokyo Institute of Technology analysis combines the merits of two major previous approaches to type­based analysis of resource usage be eventually released. To ensure correct usage of resources, a number of type systems have been proposed

Kobayashi, Naoki

113

Columbia River System Operation Review : Final Environmental Impact Statement, Appendix J: Recreation.  

SciTech Connect (OSTI)

This Appendix J of the Final Environmental Impact Statement for the Columbia River System discusses impacts on the recreational activities in the region. Major sections include the following: scope and processes; recreation in the Columbia River Basin today - by type, location, participation, user characteristics, factors which affect usage, and managing agencies; recreation analysis procedures and methodology; and alternatives and their impacts.

Columbia River System Operation Review (U.S.)

1995-11-01T23:59:59.000Z

114

An assessment of worldwide supercomputer usage  

SciTech Connect (OSTI)

This report provides a comparative study of advanced supercomputing usage in Japan and the United States as of Spring 1994. It is based on the findings of a group of US scientists whose careers have centered on programming, evaluating, and designing high-performance supercomputers for over ten years. The report is a follow-on to an assessment of supercomputing technology in Europe and Japan that was published in 1993. Whereas the previous study focused on supercomputer manufacturing capabilities, the primary focus of the current work was to compare where and how supercomputers are used. Research for this report was conducted through both literature studies and field research in Japan.

Wasserman, H.J.; Simmons, M.L.; Hayes, A.H.

1995-01-01T23:59:59.000Z

115

Process for the synthesis of iron powder  

DOE Patents [OSTI]

A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder. 2 figs.

Welbon, W.W.

1983-11-08T23:59:59.000Z

116

Process for the synthesis of iron powder  

DOE Patents [OSTI]

A process for preparing iron powder suitable for use in preparing the iron-potassium perchlorate heat-powder fuel mixture used in thermal batteries, comprises preparing a homogeneous, dense iron oxide hydroxide precipitate by homogeneous precipitation from an aqueous mixture of a ferric salt, formic or sulfuric acid, ammonium hydroxide and urea as precipitating agent; and then reducing the dense iron oxide hydroxide by treatment with hydrogen to prepare the iron powder.

Not Available

1982-03-06T23:59:59.000Z

117

Web Usage Analysis: New Science Indicators and Xavier Polanco, Ivana Roche, Dominique Besagni  

E-Print Network [OSTI]

Web Usage Analysis: New Science Indicators and Co-usage Xavier Polanco, Ivana Roche, Dominique données d'usage du Web, indicateurs de la science, comportement utilisateur Web, analyse co-usage, serveur Web Keywords: webometrics, Web usage mining, science indicators, Web user behaviour, co-usage analysis

Boyer, Edmond

118

Pennsylvania Scenic Rivers Program  

Broader source: Energy.gov [DOE]

Rivers included in the Scenic Rivers System will be classified, designated and administered as Wild, Scenic, Pastoral, Recreational and Modified Recreational Rivers (Sections 4; (a) (1) of the...

119

Geothermal: Sponsored by OSTI -- Ways to Minimize Water Usage...  

Office of Scientific and Technical Information (OSTI)

Ways to Minimize Water Usage in Engineered Geothermal Systems Geothermal Technologies Legacy Collection HelpFAQ | Site Map | Contact Us | Admin Log On HomeBasic Search About...

120

Thermal plasma chemical synthesis of powders  

SciTech Connect (OSTI)

Thermal plasma processing has been increasingly used to synthesize submicron powders of high-purity ceramics and metals. The high temperatures generated with the plasma provide a vapor phase reaction zone for elements with high boiling points and refractory materials. An overview is presented on the general plasma technology used in synthesis and on the properties of plasma powders.

Vogt, G.J.; Newkirk, L.R.

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Wet powder seal for gas containment  

DOE Patents [OSTI]

A gas seal is formed by a compact layer of an insoluble powder and liquid filling the fine interstices of that layer. The smaller the particle size of the selected powder, such as sand or talc, the finer will be the interstices or capillary spaces in the layer and the greater will be the resulting sealing capacity, i.e., the gas pressure differential which the wet powder layer can withstand. Such wet powder seal is useful in constructing underground gas reservoirs or storage cavities for nuclear wastes as well as stopping leaks in gas mains buried under ground or situated under water. The sealing capacity of the wet powder seal can be augmented by the hydrostatic head of a liquid body established over the seal.

Stang, Louis G. (Sayville, NY)

1982-01-01T23:59:59.000Z

122

LIQUID PHASE SINTERING OF IRON WITH COPPER BASE ALLOY POWDERS  

E-Print Network [OSTI]

Symposium on Powder Metallurgy - The Iron and Steel Inst.a Liquid Phase", Powder Metallurgy, 17 (33), 227 (1974). H.Other made by powder metallurgy techniques. ses to produce

Chen, M.-H.

2010-01-01T23:59:59.000Z

123

Efficient and Anonymous Web-Usage Mining for Web Personalization  

E-Print Network [OSTI]

Efficient and Anonymous Web-Usage Mining for Web Personalization Cyrus Shahabi · Farnoush Banaei fixed. The full economic potential of the web will not be realized unless enabling technologies approach to remedy this problem, and web mining, particularly web-usage mining, is considered a crucial

Shahabi, Cyrus

124

Cleopatra: Evolutionary Pattern-based Clustering of Web Usage Data  

E-Print Network [OSTI]

Cleopatra: Evolutionary Pattern-based Clustering of Web Usage Data Qiankun Zhao1 Sourav S Bhowmick1 Le Gruenwald2 1 CAIS, Nanyang Technological University, Singapore 2 University of Oklahoma, Norman, USA qkzhao@pmail.ntu.edu.sg assourav@ntu.edu.sg ggruenwald@ou.edu Abstract. Existing web usage mining

Bhowmick, Sourav S.

125

Distributed Usage Control Alexander Pretschner, Manuel Hilty, David Basin  

E-Print Network [OSTI]

Distributed Usage Control Alexander Pretschner, Manuel Hilty, David Basin 1 Introduction Computer to potentially uncontrolled distribution. These technologies improve, for the most part, the quality of our lives technical challenges here are controlling data access and usage. While the fundamentals of access control

Basin, David

126

Usage Control: A Vision for Next Generation Access Control  

E-Print Network [OSTI]

Neutral ABC model CRM/SRM, CDID architectures DRM technologies, certificates, etc. OM-AM Framework UsageUsage Control: A Vision for Next Generation Access Control Infs767, Oct 23, 2003 Ravi Sandhu and Jaehong Park (www.list.gmu.edu) Laboratory for Information Security Technology (LIST) George Mason

Sandhu, Ravi

127

Research article Statistics usage by French academic libraries a  

E-Print Network [OSTI]

1/15 Research article Statistics usage by French academic libraries ­ a survey Chérifa BOUKACEM of digital resources in academic libraries, the small number of articles dedicated to the processing of usage-ZEGHMOURI Université Lyon 1 Joachim SCH�PFEL Université Charles-de-Gaulle Lille 3 Abstract The article presents

Boyer, Edmond

128

KOINOTITES: A Web Usage Mining Tool for Personalization  

E-Print Network [OSTI]

KOINOTITES: A Web Usage Mining Tool for Personalization Dimitrios Pierrakos Inst. of Informatics@iit.demokritos.gr SUMMARY This paper presents the Web Usage Mining system KOINOTITES, which uses data mining techniques for the construction of user communities on the Web. User communities model groups of visitors in a Web site, who have

Paliouras, George

129

A Genetic Algorithm Approach to Focused Software Usage Testing  

E-Print Network [OSTI]

A Genetic Algorithm Approach to Focused Software Usage Testing Robert M. Patton, Annie S. Wu Orlando, FL, U.S.A. ABSTRACT Because software system testing typically consists of only a very small the test results from a limited amount of testing based on high-level usage models. It can also be very

Wu, Annie S.

130

Furman University Justification of Business Usage of Cell Phone  

E-Print Network [OSTI]

Furman University Justification of Business Usage of Cell Phone 1 Name Justification of Business Usage of Cell Phone 2 The type of cell phone coverage must be reasonably workday? Yes_____ No_____ Other business reason that may necessitate use of cell phone, describe

131

Cognitive UWB-OFDM: Combining Ultrawideband with Opportunistic Spectrum Usage  

E-Print Network [OSTI]

wireless world, the number of radio systems increases every day, and efficient spectrum usage becomes problem, cognitive radio proposes an opportunistic spectrum usage approach [3], in which frequency bands that are not being used by their primary (licensed) users are utilized by cognitive radios. Both UWB and cognitive

Arslan, HĂĽseyin

132

A MOOS MODULE FOR MONITORING ENERGY USAGE OF AUTONOMOUS VEHICLES  

E-Print Network [OSTI]

A MOOS MODULE FOR MONITORING ENERGY USAGE OF AUTONOMOUS VEHICLES Anthony Kanago, Kevin Roos, James--Tracking the energy usage of an autonomous underwater vehicle (AUV) and making accurate data available provides is particularly relevant in the context of long, open-sea missions: energy consumption. A vehicle operating

Idaho, University of

133

Electrochemical Studies of Packed Iron Powder Electrodes: Effects...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Packed Iron Powder Electrodes: Effects of Common Constituents of Natural Waters on Corrosion Electrochemical Studies of Packed Iron Powder Electrodes: Effects of Common...

134

Usage Mining for the World Wide Web WenChen Hu, wenchen@cs.und.edu  

E-Print Network [OSTI]

an overview and analysis of current Web usage mining technologies and systems. A Web usage mining system recommendations, etc. This paper provides an overview and analysis of current Web usage mining technologies usage mining is also given. Related Web usage mining technology reviews can also be found in [13, 17

Hu, Wen-Chen

135

Continuous blending of dry pharmaceutical powders  

E-Print Network [OSTI]

Conventional batch blending of pharmaceutical powders coupled with long quality analysis times increases the production cycle time leading to strained cash flows. Also, scale-up issues faced in process development causes ...

Pernenkil, Lakshman

2008-01-01T23:59:59.000Z

136

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A biaxially textured alloy article comprises Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacted and heat treated, then rapidly recrystallized to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN)

2001-01-01T23:59:59.000Z

137

Synthesis and processing of monosized oxide powders  

DOE Patents [OSTI]

Uniform-size, high-purity, spherical oxide powders are formed by hydrolysis of alkoxide precursors in dilute alcoholic solutions. Under controlled conditions (concentrations of 0.03 to 0.2 M alkoxide and 0.2 to 1.5 M water, for example) oxide particles on the order of about 0.05 to 0.7 micron can be produced. Methods of doping such powders and forming sinterable compacts are also disclosed.

Barringer, Eric A. (Waltham, MA); Fegley, Jr., M. Bruce (Waban, MA); Bowen, H. Kent (Belmont, MA)

1985-01-01T23:59:59.000Z

138

Tantalum powder consolidation, modeling and properties  

SciTech Connect (OSTI)

A systematic approach was taken to investigate the consolidation of tantalum powders. The effects of sinter time, temperature and ramp rate; hot isostatic pressing (HIP) temperature and time; and powder oxygen content on consolidation density, kinetics, microstructure, crystallographic texture, and mechanical properties have been evaluated. In general, higher temperatures and longer hold times resulted in higher density compacts with larger grain sizes for both sintering and HIP`ing. HIP`ed compacts were consistently higher in density than sintered products. The higher oxygen content powders resulted in finer grained, higher density HIP`ed products than the low oxygen powders. Texture analysis showed that the isostatically processed powder products demonstrated a near random texture. This resulted in isotropic properties in the final product. Mechanical testing results showed that the HIP`ed powder products had consistently higher flow stresses than conventionally produced plates, and the sintered compacts were comparable to the plate material. A micromechanics model (Ashby HIP model) has been employed to predict the mechanisms active in the consolidation processes of cold isostatic pressing (CIP), HIP and sintering. This model also predicts the density of the end product and whether grain growth should be expected under the applied processing conditions.

Bingert, S.R.; Vargas, V.D.; Sheinberg, H.C.

1996-10-01T23:59:59.000Z

139

The Impact of Residential Density on Vehicle Usage and Energy Consumption  

E-Print Network [OSTI]

on Vehicle Usage and Energy Consumption References Bento,Vehicle Usage and Energy Consumption UCI-ITS-WP-05-1 Thomason Vehicle Usage and Energy Consumption Thomas F. Golob

Golob, Thomas F; Brownstone, David

2005-01-01T23:59:59.000Z

140

Using Incremental Fuzzy Clustering to Web Usage Saeed R. Aghabozorgi  

E-Print Network [OSTI]

Using Incremental Fuzzy Clustering to Web Usage Mining Saeed R. Aghabozorgi Department of Information Science, Faculty of Computer Science and Information Technology University of Malaya Kuala Lumpur Science and Information Technology University of Malaya Kuala Lumpur, Malaysia tehyw

Hammerton, James

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________  

E-Print Network [OSTI]

VEHICLE USAGE LOG Department ________________________________________ Vehicle Homebase ____________________________ Week Ended (Sunday) _________________ Door #____________ License Plate ____________________ Vehicle/Supplies (Enter Description such as grade sheets, artifacts, money, etc.) 6. Taking vehicle to Automotive Shop

Yang, Zong-Liang

142

Transportation & Work: Exploring Car Usage and Employment Outcomes  

E-Print Network [OSTI]

Transportation & Work: Exploring Car Usage and Employment Outcomes in the LSAL Data Field Area...................................................................................................10 5. DESCRIPTIVE STATISTICS of 1996, or "welfare reform," attention turned to the role of transportation in job search and employment

Bertini, Robert L.

143

Slip casting nano-particle powders for making transparent ceramics  

DOE Patents [OSTI]

A method of making a transparent ceramic including the steps of providing nano-ceramic powders in a processed or unprocessed form, mixing the powders with de-ionized water, the step of mixing the powders with de-ionized water producing a slurry, sonifing the slurry to completely wet the powder and suspend the powder in the de-ionized water, separating very fine particles from the slurry, molding the slurry, and curing the slurry to produce the transparent ceramic.

Kuntz, Joshua D. (Livermore, CA); Soules, Thomas F. (Livermore, CA); Landingham, Richard Lee (Livermore, CA); Hollingsworth, Joel P. (Oakland, CA)

2011-04-12T23:59:59.000Z

144

Red River Compact (Texas)  

Broader source: Energy.gov [DOE]

The Red River Compact Commission administers the Red River Compact to ensure that Texas receives its equitable share of quality water from the Red River and its tributaries as apportioned by the...

145

The impact of residential density on vehicle usage and fuel consumption  

E-Print Network [OSTI]

characteristics on household residential choice and auto2009. The impact of residential density on vehicle usage and2010-05) The impact of residential density on vehicle usage

Kim, Jinwon; Brownstone, David

2010-01-01T23:59:59.000Z

146

The Impact of Residential Density on Vehicle Usage and Energy Consumption  

E-Print Network [OSTI]

Vehicle Usage and Energy Consumption Table 2 Housing Unitsresidential vehicular energy consumption is graphed as aon Vehicle Usage and Energy Consumption with vehicles, but

Golob, Thomas F.; Brownstone, David

2005-01-01T23:59:59.000Z

147

Die-target for dynamic powder consolidation  

DOE Patents [OSTI]

A die/target is disclosed for consolidation of a powder, especially an atomized rapidly solidified metal powder, to produce monoliths by the dynamic action of a shock wave, especially a shock wave produced by the detonation of an explosive charge. The die/target comprises a rectangular metal block having a square primary surface with four rectangular mold cavities formed therein to receive the powder. The cavities are located away from the geometrical center of the primary surface and are distributed around such center while also being located away from the geometrical diagonals of the primary surface to reduce the action of reflected waves so as to avoid tensile cracking of the monoliths. The primary surface is covered by a powder retention plate which is engaged by a flyer plate to transmit the shock wave to the primary surface and the powder. Spawl plates are adhesively mounted on other surfaces of the block to act as momentum traps so as to reduce reflected waves in the block. 4 figs.

Flinn, J.E.; Korth, G.E.

1985-06-27T23:59:59.000Z

148

Platte River Cooperative Agreement  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Platte River Cooperative Agreement Skip Navigation Links Transmission Functions Infrastructure projects Interconnection OASIS OATT Platte River Cooperative Agreement PEIS, NE, WY,...

149

Maine Rivers Policy (Maine)  

Broader source: Energy.gov [DOE]

The Maine Rivers Policy accompanies the Maine Waterway Development and Conservation Act and provides additional protection for some river and stream segments, which are designated as “outstanding...

150

River Basin Commissions (Indiana)  

Broader source: Energy.gov [DOE]

This legislation establishes river basin commissions, for the Kankakee, Maumee, St. Joseph, and Upper Wabash Rivers. The commissions facilitate and foster cooperative planning and coordinated...

151

Wabash River Heritage Corridor (Indiana)  

Broader source: Energy.gov [DOE]

The Wabash River Heritage Corridor, consisting of the Wabash River, the Little River, and the portage between the Little River and the Maumee River, is considered a protected area, where...

152

Biaxially textured articles formed by powder metallurgy  

DOE Patents [OSTI]

A strengthened, biaxially textured alloy article having a magnetism less than pure Ni includes a rolled and annealed, compacted and sintered powder-metallurgy preform article, the preform article having been formed from a powder mixture selected from the group of mixtures consisting of: Ni, Ag, Ag--Cu, Ag--Pd, Ni--Cu, Ni--V, Ni--Mo, Ni--Al, Ni--Cr--Al, Ni--W--Al, Ni--V--Al, Ni--Mo--Al, Ni--Cu--Al; and at least one fine metal oxide powder; the article having a grain size which is fine and homogeneous; and having a dominant cube oriented {100}<100> orientation texture; and further having a Curie temperature less than that of pure Ni.

Goyal, Amit; Williams, Robert K.; Kroeger, Donald M.

2003-10-21T23:59:59.000Z

153

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

Salyer, Ival O. (Dayton, OH)

1995-01-01T23:59:59.000Z

154

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figs.

Salyer, I.O.

1995-12-26T23:59:59.000Z

155

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft. 3 figures.

Salyer, I.O.

1994-12-06T23:59:59.000Z

156

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and particularly in applications for heat protection for heat sensitive items, such as aircraft flight recorders, and for preventing brake fade in automobiles, buses, trucks and aircraft.

Salyer, Ival O. (Dayton, OH)

1994-01-01T23:59:59.000Z

157

2011 Radioactive Materials Usage Survey for Unmonitored Point Sources  

SciTech Connect (OSTI)

This report provides the results of the 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources (RMUS), which was updated by the Environmental Protection (ENV) Division's Environmental Stewardship (ES) at Los Alamos National Laboratory (LANL). ES classifies LANL emission sources into one of four Tiers, based on the potential effective dose equivalent (PEDE) calculated for each point source. Detailed descriptions of these tiers are provided in Section 3. The usage survey is conducted annually; in odd-numbered years the survey addresses all monitored and unmonitored point sources and in even-numbered years it addresses all Tier III and various selected other sources. This graded approach was designed to ensure that the appropriate emphasis is placed on point sources that have higher potential emissions to the environment. For calendar year (CY) 2011, ES has divided the usage survey into two distinct reports, one covering the monitored point sources (to be completed later this year) and this report covering all unmonitored point sources. This usage survey includes the following release points: (1) all unmonitored sources identified in the 2010 usage survey, (2) any new release points identified through the new project review (NPR) process, and (3) other release points as designated by the Rad-NESHAP Team Leader. Data for all unmonitored point sources at LANL is stored in the survey files at ES. LANL uses this survey data to help demonstrate compliance with Clean Air Act radioactive air emissions regulations (40 CFR 61, Subpart H). The remainder of this introduction provides a brief description of the information contained in each section. Section 2 of this report describes the methods that were employed for gathering usage survey data and for calculating usage, emissions, and dose for these point sources. It also references the appropriate ES procedures for further information. Section 3 describes the RMUS and explains how the survey results are organized. The RMUS Interview Form with the attached RMUS Process Form(s) provides the radioactive materials survey data by technical area (TA) and building number. The survey data for each release point includes information such as: exhaust stack identification number, room number, radioactive material source type (i.e., potential source or future potential source of air emissions), radionuclide, usage (in curies) and usage basis, physical state (gas, liquid, particulate, solid, or custom), release fraction (from Appendix D to 40 CFR 61, Subpart H), and process descriptions. In addition, the interview form also calculates emissions (in curies), lists mrem/Ci factors, calculates PEDEs, and states the location of the critical receptor for that release point. [The critical receptor is the maximum exposed off-site member of the public, specific to each individual facility.] Each of these data fields is described in this section. The Tier classification of release points, which was first introduced with the 1999 usage survey, is also described in detail in this section. Section 4 includes a brief discussion of the dose estimate methodology, and includes a discussion of several release points of particular interest in the CY 2011 usage survey report. It also includes a table of the calculated PEDEs for each release point at its critical receptor. Section 5 describes ES's approach to Quality Assurance (QA) for the usage survey. Satisfactory completion of the survey requires that team members responsible for Rad-NESHAP (National Emissions Standard for Hazardous Air Pollutants) compliance accurately collect and process several types of information, including radioactive materials usage data, process information, and supporting information. They must also perform and document the QA reviews outlined in Section 5.2.6 (Process Verification and Peer Review) of ES-RN, 'Quality Assurance Project Plan for the Rad-NESHAP Compliance Project' to verify that all information is complete and correct.

Sturgeon, Richard W. [Los Alamos National Laboratory

2012-06-27T23:59:59.000Z

158

Temporal Analysis of API Usage Concepts Gias Uddin, Barthelemy Dagenais, and Martin P. Robillard  

E-Print Network [OSTI]

Temporal Analysis of API Usage Concepts Gias Uddin, Barth´el´emy Dagenais, and Martin P. Robillard of a client program. We propose Temporal API Usage Pattern Mining to detect API usage patterns in terms and detect temporal usage patterns, where a pattern contains a set of concepts that were added

Robillard, Martin

159

Portable Wireless Sensors for Object Usage Sensing in the Home: Challenges and Practicalities  

E-Print Network [OSTI]

with creating such "object usage" sensors. We describe the existing technologies used to recognize object usage these applications, researchers require an object usage sensing technology that allows them to easily enterPortable Wireless Sensors for Object Usage Sensing in the Home: Challenges and Practicalities

160

World Wide Web Usage Mining Systems and Technologies Wen-Chen Hu  

E-Print Network [OSTI]

World Wide Web Usage Mining Systems and Technologies Wen-Chen Hu Department of Computer Science and technologies. A Web usage mining system performs five major tasks: i) data gathering, ii) data preparation, iii usage mining technologies and systems. A Web usage mining system must be able to perform five major

Hu, Wen-Chen

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Detecting API Usage Obstacles: A Study of iOS and Android Developer Questions  

E-Print Network [OSTI]

Detecting API Usage Obstacles: A Study of iOS and Android Developer Questions Wei Wang and Michael, they often encounter obstacles in finding the correct usage of the API, let alone to employ best practices. Previous research addresses this line of questions by mining API usage patterns to induce API usage

Godfrey, Michael W.

162

A Framework for Personal Web Usage Mining Yongjian Fu Ming-Yi Shih  

E-Print Network [OSTI]

A Framework for Personal Web Usage Mining Yongjian Fu Ming-Yi Shih Department of Computer Science-0350 Rolla, MO 65409-0350 yongjian@umr.edu mingyi@umr.edu Abstract In this paper, we propose to mine Web usage data on client side, or personal Web usage mining, as a complement to the server side Web usage

Fu, Yongjian

163

A Framework for Personal Web Usage Mining Yongjian Fu MingYi Shih  

E-Print Network [OSTI]

A Framework for Personal Web Usage Mining Yongjian Fu Ming­Yi Shih Department of Computer Science­0350 Rolla, MO 65409­0350 yongjian@umr.edu mingyi@umr.edu Abstract In this paper, we propose to mine Web usage data on client side, or personal Web usage mining, as a complement to the server side Web usage

Fu, Yongjian

164

Commercial Building Tenant Energy Usage Aggregation and Privacy  

SciTech Connect (OSTI)

A growing number of building owners are benchmarking their building energy use. This requires the building owner to acquire monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer energy use data (CEUD) as a way to give building owners whole-building energy usage data while protecting customer privacy. Meter profile aggregation adds a layer of protection that decreases the risk of revealing CEUD as the number of meters aggregated increases. The report statistically characterizes the similarity between individual energy usage patterns and whole-building totals at various levels of meter aggregation.

Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.; Wang, Na

2014-10-31T23:59:59.000Z

165

Mining Software Usage with the Automatic Library Tracking Database (ALTD)  

SciTech Connect (OSTI)

Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

Hadri, Bilel [ORNL; Fahey, Mark R [ORNL

2013-01-01T23:59:59.000Z

166

AN INVESTIGATION OF A THERMOPLASTIC-POWDER METALLURGY PROCESS FOR THE FABRICATION OF POROUS NIOBIUM RODS  

E-Print Network [OSTI]

Compositions, Powder Metallurgy, Vol. 8, No. 16, 1965. W.THERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATIONTHERMOPLASTIC- POWDER METALLURGY PROCESS FOR THE FABRICATION

Nordin, Dennis R.

2011-01-01T23:59:59.000Z

167

Development and Testing of a BI-2212 Textured Powder Conductor  

E-Print Network [OSTI]

for Praxair powder in a 500 cP epoxy. .................................................................................................................. 23 Fig. 8: Texture vs. time for various epoxy and powder combinations. All data from an 8.9 T applied...

Damborsky, Kyle

2014-03-10T23:59:59.000Z

168

1. Cooling water is one-third of US water usage Basic approach: (a) estimate power consumption, from which you estimate cooling water usage  

E-Print Network [OSTI]

1. Cooling water is one-third of US water usage Basic approach: (a) estimate power consumption) Water for power consumption I happen to know that total energy usage is roughly 10 kW per person energy usage by a lot. Now we assume that a power plant is 50% efficient. I assumed more than 20%, less

Nimmo, Francis

169

SIS a new SFF method based on powder  

E-Print Network [OSTI]

. This approach, used by SLS and 3D printing, is able to create thin and uniformly dense powder layers. Other

Asiabanpour, Bahram - Department of Engineering and Technology, Texas State University

170

Modelling the mechanical behaviour of pharmaceutical powders during compaction  

E-Print Network [OSTI]

are made of dry powder through a powder compaction process. In the pharmaceutical industry, billionsModelling the mechanical behaviour of pharmaceutical powders during compaction C.-Y. Wua,T, O.M. Ruddyb , A.C. Benthamb , B.C. Hancockc , S.M. Besta , J.A. Elliotta a Pfizer Institute for Pharmaceutical

Elliott, James

171

Thermite powder ignition by localized microwaves Yehuda Meir, Eli Jerby  

E-Print Network [OSTI]

- propagating high-temperature synthesis (SHS) for sintering of ceramic composites [14]. The magnetic (H, the microwave energy is supplied locally to the powder. It creates a confined hotspot, and initiates a self-propagating the powder prior to its ignition is simulated theoretically, taking into account the powder's temperature

Jerby, Eli

172

Fuel bundle design for enhanced usage of plutonium fuel  

DOE Patents [OSTI]

A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced.

Reese, Anthony P. (San Jose, CA); Stachowski, Russell E. (Fremont, CA)

1995-01-01T23:59:59.000Z

173

Usage Control in Service-Oriented Architectures Alexander Pretschner1  

E-Print Network [OSTI]

to the present and the past. More recent work has extended the concept to usage control (UC for short; [4 appropriate than enforcement by direct control over the service provider's actions, and present a logical architectures. 1 Introduction The past few years have seen major technological and business trends

Massacci, Fabio

174

Accountable Anonymous Service Usage in Mobile Communication Systems \\Lambda  

E-Print Network [OSTI]

to one particular physical location. From a technology perspective, mobile communication systems haveAccountable Anonymous Service Usage in Mobile Communication Systems \\Lambda Levente Butty of Technology CH­1015 Lausanne, Switzerland fLevente.Buttyan, Jean­Pierre.Hubauxg@epfl.ch 23rd June 1999

Bencsáth, Boldizsár

175

Access to and Usage of Offshore Liberty Ship  

E-Print Network [OSTI]

Access to and Usage of Offshore Liberty Ship Reefs in Texas ROBERT B. DITTON, ALAN R. GRAEFE to establish cover and habitat for fisheries. Offshore artificial reef con- struction began in 1935 led many other states to become interested in deploying offshore artificial reefs. The first reef

176

A Multilingual Usage Consultation Tool Based on Internet Searching  

E-Print Network [OSTI]

A Multilingual Usage Consultation Tool Based on Internet Searching -More than a search engine, less than QA- Kumiko Tanaka-Ishii Graduate School of Information Science and Technology University of Tokyo Technology Center University of Tokyo 7-3-1 Hongo, Bunkyo-ku Tokyo, Japan nakagawa

Nakagawa, Hiroshi

177

A UML Profile for Modeling Data Warehouse Usage  

E-Print Network [OSTI]

A UML Profile for Modeling Data Warehouse Usage Veronika Stefanov and Beate List Women's Postgraduate College for Internet Technologies Institute of Software Technology and Interactive Systems Vienna University of Technology {stefanov, list}@wit.tuwien.ac.at Abstract. Data Warehouse (DWH) systems represent

178

Learning Policies For Battery Usage Optimization in Electric Vehicles  

E-Print Network [OSTI]

algorithmic chal- lenge. 1 Introduction Electric vehicles, partially or fully powered by batteries, are oneLearning Policies For Battery Usage Optimization in Electric Vehicles Stefano Ermon, Yexiang Xue for the widespread adoption of electric vehicles. Multi-battery systems that combine a standard battery

Bejerano, Gill

179

A Web Usage Mining Framework for Web Directories Personalization  

E-Print Network [OSTI]

A Web Usage Mining Framework for Web Directories Personalization Dimitrios Pierrakos Department framework that combines Web personalization and Web directories, which results in the concept of Community Web Directories. Community Web directories is a novel form of personalization performed on Web

Kouroupetroglou, Georgios

180

Personalizing Web Directories with the Aid of Web Usage Data  

E-Print Network [OSTI]

Personalizing Web Directories with the Aid of Web Usage Data Dimitrios Pierrakos, Member, IEEE of Community Web Directories, a concept that we introduced in our recent work, applying personalization to Web directories. In this context, the Web directory is viewed as a thematic hierarchy and personalization

Paliouras, George

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Towards activity-relevant attribution of IT energy usage  

E-Print Network [OSTI]

Towards activity-relevant attribution of IT energy usage From a previous study we were able to disaggregate per socket energy consumption from whole domicile energy consumption. We discovered that Home preparation/storage, it is the largest contributor to personal energy consumption. Understanding how and when

Chaudhuri, Surajit

182

An Analysis of Anonymity Technology Usage Bingdong Li1  

E-Print Network [OSTI]

criminals to hide themselves. In this paper, we provide usage and geo-location analysis of major- linkability, i.e., observers can not link an agent to a specific message or action. Equally contributing a dichotomous issue in both social life and cy- ber space. Anonymity technologies have been used for criminal

Gunes, Mehmet Hadi

183

Personality and Patterns of Facebook Usage Yoram Bachrach  

E-Print Network [OSTI]

Personality and Patterns of Facebook Usage Yoram Bachrach Microsoft Research yobach.ac.uk ABSTRACT We show how users' activity on Facebook relates to their per- sonality, as measured by the standard Five Factor Model. Our dataset consists of the personality profiles and Facebook pro- file data

Rajamani, Sriram K.

184

Statler College Research Data Center Access and Usage Policy  

E-Print Network [OSTI]

Statler College Research Data Center Access and Usage Policy Objective Access to the Statler under WVU and federal guidelines. Scope This policy applies to all Statler staff, faculty, administrators, officers, contractors and students. Policy Access to the RDC shall be limited to those authorized

Mohaghegh, Shahab

185

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns  

E-Print Network [OSTI]

Improving Home Automation by Discovering Regularly Occurring Device Usage Patterns Edwin O in an environment can be mined to discover significant patterns, which an intelligent agent could use to automate of two prediction algorithms, thus demonstrating multiple uses for a home automation system. Finally, we

Cook, Diane J.

186

Energy Usage Attitudes of Urban India IBM Research India  

E-Print Network [OSTI]

Energy Usage Attitudes of Urban India Mohit Jain IBM Research India mohitjain@in.ibm.com Deepika@cs.cmu.edu Amarjeet Singh IIIT Delhi, India amarjeet@iiitd.ac.in Abstract-- Though rapid increase in energy factors affecting energy consumption in urban India. However, the small numbers of participants in those

Toronto, University of

187

Cryptographic Link Signatures for Spectrum Usage Authentication in Cognitive Radio  

E-Print Network [OSTI]

Cryptographic Link Signatures for Spectrum Usage Authentication in Cognitive Radio Xi Tan, Kapil frequency spectrum was inefficiently utilized. To fully use these spectrums, cognitive radio networks have of cognitive radio is to enable the current fixed spectrum channels assigned by Federal Communica- tions

Du, Wenliang "Kevin"

188

Personalized Power Saving Profiles Generation Analyzing Smart Device Usage Patterns  

E-Print Network [OSTI]

Personalized Power Saving Profiles Generation Analyzing Smart Device Usage Patterns Soumya Kanti interactions of smart devices. This paper describes a client-server architecture that proposes personalized and they are sent back to the smart devices. These profiles are highly personalized since they are developed

Gesbert, David

189

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 2 figures.

Salyer, I.O.

1994-02-01T23:59:59.000Z

190

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7[times]10[sup [minus]3] to about 7[times]10[sup [minus]2] microns and the p.c.m. must be added to the silica in an amount of 80 wt. % or less p.c.m. per combined weight of silica and p.c.m. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a p.c.m. material. The silica-p.c.m. mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, I.O.

1993-05-18T23:59:59.000Z

191

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

A free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7 [times] 10[sup [minus]3] to about 7 [times] 10[sup [minus]2] microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub. 9 figs.

Salyer, I.O.

1992-04-21T23:59:59.000Z

192

Fabricating solid carbon porous electrodes from powders  

DOE Patents [OSTI]

Fabrication of conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive dionization, and waste treatment. Electrodes fabricated from low surface area (<50 m.sup.2 /gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon compositives with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to be high surface area carbons, fuel cell electrodes can be produced.

Kaschmitter, James L. (Pleasanton, CA); Tran, Tri D. (Livermore, CA); Feikert, John H. (Livermore, CA); Mayer, Steven T. (San Leandro, CA)

1997-01-01T23:59:59.000Z

193

Fabricating solid carbon porous electrodes from powders  

DOE Patents [OSTI]

Fabrication is described for conductive solid porous carbon electrodes for use in batteries, double layer capacitors, fuel cells, capacitive deionization, and waste treatment. Electrodes fabricated from low surface area (<50 m{sup 2}/gm) graphite and cokes exhibit excellent reversible lithium intercalation characteristics, making them ideal for use as anodes in high voltage lithium insertion (lithium-ion) batteries. Electrodes having a higher surface area, fabricated from powdered carbon blacks, such as carbon aerogel powder, carbon aerogel microspheres, activated carbons, etc. yield high conductivity carbon composites with excellent double layer capacity, and can be used in double layer capacitors, or for capacitive deionization and/or waste treatment of liquid streams. By adding metallic catalysts to high surface area carbons, fuel cell electrodes can be produced. 1 fig.

Kaschmitter, J.L.; Tran, T.D.; Feikert, J.H.; Mayer, S.T.

1997-06-10T23:59:59.000Z

194

EPR Investigation of Irradiated Curry Powder  

SciTech Connect (OSTI)

Gamma-ray irradiated curry powder, a well priced oriental spice was investigated in order to establish the ability of EPR to detect the presence and time stability of free irradiation free-radicals. Accordingly, curry powder aliquots were irradiated with gradually increasing absorbed doses up to 11.3 kGy. The EPR spectra of all irradiated samples show the presence of al last two different species of free radicals, whose concentration increased monotonously with the absorbed doses. A 100 deg. C isothermal annealing of irradiated samples has shown a differential reduction of amplitude of various components of the initial spectra, but even after 3.6 h of thermal treatment, the remaining amplitude represents no less then 30% of the initial ones. The same peculiarities have been noticed after more than one year storage at room temperature, all of them being very useful in establishing the existence of any previous irradiation treatment.

Duliu, O. G.; Ali, S. I. [University of Bucharest, Department of Atomic and Nuclear Physics, P.O. Box MG-11, 077125 Bucharest (Romania); Georgescu, R. [National Institute for Physics and Nuclear Engineering-Horia Hulubei, P.O. Box MG-6, 077125 Bucharest (Romania)

2007-04-23T23:59:59.000Z

195

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1992-01-01T23:59:59.000Z

196

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (PCM) is provided. The silica particles have a critical size of about 0.005 to about 0.025 microns and the PCM must be added to the silica in an amount of 75% or less PCM per combined weight of silica and PCM. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a PCM material. The silica-PCM mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1994-01-01T23:59:59.000Z

197

Dry powder mixes comprising phase change materials  

SciTech Connect (OSTI)

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garmets, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1993-01-01T23:59:59.000Z

198

Dry powder mixes comprising phase change materials  

DOE Patents [OSTI]

Free flowing, conformable powder-like mix of silica particles and a phase change material (p.c.m.) is disclosed. The silica particles have a critical size of about 7.times.10.sup.-3 to about 7.times.10.sup.-2 microns and the pcm must be added to the silica in an amount of 80 wt. % or less pcm per combined weight of silica and pcm. The powder-like mix can be used in tableware items, medical wraps, tree wraps, garments, quilts and blankets, and in cementitious compositions of the type in which it is beneficial to use a pcm material. The silica-pcm mix can also be admixed with soil to provide a soil warming effect and placed about a tree, flower, or shrub.

Salyer, Ival O. (Dayton, OH)

1993-01-01T23:59:59.000Z

199

The reflection of very cold neutrons from diamond powder nanoparticles  

E-Print Network [OSTI]

We study possibility of efficient reflection of very cold neutrons (VCN) from powders of nanoparticles. In particular, we measured the scattering of VCN at a powder of diamond nanoparticles as a function of powder sample thickness, neutron velocity and scattering angle. We observed extremely intense scattering of VCN even off thin powder samples. This agrees qualitatively with the model of independent nanoparticles at rest. We show that this intense scattering would allow us to use nanoparticle powders very efficiently as the very first reflectors for neutrons with energies within a complete VCN range up to $10^{-4}$ eV.

V. V. Nesvizhevsky; E. V. Lychagin; A. Yu. Muzychka; A. V. Strelkov; G. Pignol; K. V. Protasov

2008-05-17T23:59:59.000Z

200

Canadian River Compact (Texas)  

Broader source: Energy.gov [DOE]

The Canadian River Commission administers the Canadian River Compact which includes the states of New Mexico, Oklahoma, and Texas. Signed in 1950 by the member states, the Compact was subsequently...

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Pecos River Compact (Texas)  

Broader source: Energy.gov [DOE]

This legislation authorizes the state's entrance into the Pecos River Compact, a joint agreement between the states of New Mexico and Texas. The compact is administered by the Pecos River Compact...

202

Silicon nitride/silicon carbide composite densified materials prepared using composite powders  

DOE Patents [OSTI]

Prepare silicon nitride-silicon carbide composite powders by carbothermal reduction of crystalline silica powder, carbon powder and, optionally, crystalline silicon nitride powder. The crystalline silicon carbide portion of the composite powders has a mean number diameter less than about 700 nanometers and contains nitrogen. The composite powders may be used to prepare sintered ceramic bodies and self-reinforced silicon nitride ceramic bodies.

Dunmead, S.D.; Weimer, A.W.; Carroll, D.F.; Eisman, G.A.; Cochran, G.A.; Susnitzky, D.W.; Beaman, D.R.; Nilsen, K.J.

1997-07-01T23:59:59.000Z

203

Construction of Community Web Directories based on Web usage Data  

E-Print Network [OSTI]

This paper support the concept of a community Web directory, as a Web directory that is constructed according to the needs and interests of particular user communities. Furthermore, it presents the complete method for the construction of such directories by using web usage data. User community models take the form of thematic hierarchies and are constructed by employing clustering approach. We applied our methodology to the ODP directory and also to an artificial Web directory, which was generated by clustering Web pages that appear in the access log of an Internet Service Provider. For the discovery of the community models, we introduced a new criterion that combines a priori thematic informativeness of the Web directory categories with the level of interest observed in the usage data. In this context, we introduced and evaluated new clustering method. We have tested the methodology using access log files which are collected from the proxy servers of an Internet Service Provider and provided results that ind...

Sandhyarani, Ramancha; Gyani, Jayadev; 10.5121/acij.2012.3205

2012-01-01T23:59:59.000Z

204

Proper Usage of Drugs and Chemicals in Food Animals  

E-Print Network [OSTI]

of omission or commission, violative residues in livestock and poultry (by irresponsible and illegal distribution and use of drugs) violates state and federal laws. When FSIS inspectors detect violative drug residues in food products derived from ani- mals... quality ani- mal food products. Extra-label distribution, prescription and use of veterinary drugs in food producing animals are reg- ulated by FDA. The FDA policy requires all extra- label drug usage to be under the control of a licensed veterinarian...

Faries Jr., Floron C.

2002-02-15T23:59:59.000Z

205

Fuel bundle design for enhanced usage of plutonium fuel  

DOE Patents [OSTI]

A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced. 10 figs.

Reese, A.P.; Stachowski, R.E.

1995-08-08T23:59:59.000Z

206

Residential Lighting Usage Estimate Tool, v1.0  

Broader source: Energy.gov [DOE]

By improving our understanding of residential lighting-energy usage and quantifying it across many different parameters, the new study will be of use to anyone doing energy estimates – such as utilities, market and investment analysts, and government agencies. It will also help manufacturers design products that not only better serve consumers' needs, but that maximize the energy savings that technologies like SSL make possible.

207

"Table HC10.7 Air-Conditioning Usage Indicators by U.S. Census...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Air Conditioning Usage...

208

"Table HC10.13 Lighting Usage Indicators by U.S. Census Region...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Lighting Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Lighting Usage Indicators",,"Northeast","Mi...

209

Jefferson Lab's Education web site hits new high-usage record...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Jefferson Lab's Education web site hits new high-usage record during 2003 SOL season April 2, 2003 Jefferson Lab's Science Education web site is hitting new highs in usage - on a...

210

Residential insecticide usage in northern California homes with young XIANGMEI (MAY) WUa  

E-Print Network [OSTI]

Residential insecticide usage in northern California homes with young children XIANGMEI (MAY) WUa of Health and Environment, Seoul National University, Seoul, South Korea Residential insecticide usage and August 2008. Structured telephone interviews were conducted collecting information on residential use

Leistikow, Bruce N.

211

Towards sustainable material usage : time-dependent evaluation of upgrading technologies for recycling  

E-Print Network [OSTI]

As consumption in the US grows, so does concern about sustainable materials usage. Increasing recycling is a key component within a broad arsenal of strategies for moving towards sustainable materials usage. There are many ...

Gaustad, Gabrielle G

2009-01-01T23:59:59.000Z

212

Large Bore Powder Gun Qualification (U)  

SciTech Connect (OSTI)

A Large Bore Powder Gun (LBPG) is being designed to enable experimentalists to characterize material behavior outside the capabilities of the NNSS JASPER and LANL TA-55 PF-4 guns. The combination of these three guns will create a capability to conduct impact experiments over a wide range of pressures and shock profiles. The Large Bore Powder Gun will be fielded at the Nevada National Security Site (NNSS) U1a Complex. The Complex is nearly 1000 ft below ground with dedicated drifts for testing, instrumentation, and post-shot entombment. To ensure the reliability, safety, and performance of the LBPG, a qualification plan has been established and documented here. Requirements for the LBPG have been established and documented in WE-14-TR-0065 U A, Large Bore Powder Gun Customer Requirements. The document includes the requirements for the physics experiments, the gun and confinement systems, and operations at NNSS. A detailed description of the requirements is established in that document and is referred to and quoted throughout this document. Two Gun and Confinement Systems will be fielded. The Prototype Gun will be used primarily to characterize the gun and confinement performance and be the primary platform for qualification actions. This gun will also be used to investigate and qualify target and diagnostic modifications through the life of the program (U1a.104 Drift). An identical gun, the Physics Gun, will be fielded for confirmatory and Pu experiments (U1a.102D Drift). Both guns will be qualified for operation. The Gun and Confinement System design will be qualified through analysis, inspection, and testing using the Prototype Gun for the majority of process. The Physics Gun will be qualified through inspection and a limited number of qualification tests to ensure performance and behavior equivalent to the Prototype gun. Figure 1.1 shows the partial configuration of U1a and the locations of the Prototype and Physics Gun/Confinement Systems.

Rabern, Donald A. [Los Alamos National Laboratory; Valdiviez, Robert [Los Alamos National Laboratory

2012-04-02T23:59:59.000Z

213

Red Storm usage model :Version 1.12.  

SciTech Connect (OSTI)

Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

Jefferson, Karen L.; Sturtevant, Judith E.

2005-12-01T23:59:59.000Z

214

Laser production of articles from powders  

DOE Patents [OSTI]

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path. 20 figs.

Lewis, G.K.; Milewski, J.O.; Cremers, D.A.; Nemec, R.B.; Barbe, M.R.

1998-11-17T23:59:59.000Z

215

Laser production of articles from powders  

DOE Patents [OSTI]

Method and apparatus for forming articles from materials in particulate form in which the materials are melted by a laser beam and deposited at points along a tool path to form an article of the desired shape and dimensions. Preferably the tool path and other parameters of the deposition process are established using computer-aided design and manufacturing techniques. A controller comprised of a digital computer directs movement of a deposition zone along the tool path and provides control signals to adjust apparatus functions, such as the speed at which a deposition head which delivers the laser beam and powder to the deposition zone moves along the tool path.

Lewis, Gary K. (Los Alamos, NM); Milewski, John O. (Santa Fe, NM); Cremers, David A. (Los Alamos, NM); Nemec, Ronald B. (White Rock, NM); Barbe, Michael R. (White Rock, NM)

1998-01-01T23:59:59.000Z

216

Powder Dropper | Princeton Plasma Physics Lab  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 - September 2006PhotovoltaicSeptember 22, 2014SocietyJ.Potential(GFA)Powder Dropper

217

E-Print Network 3.0 - animal antimicrobial usage Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

control. Antimicrobial usage data may... to antimicrobial ... Source: Singer, Randall - College of Veterinary Medicine, University of Minnesota Collection: Biology and...

218

Characterizing Geospatial Dynamics of Application Usage in a 3G Cellular Data Network  

E-Print Network [OSTI]

Characterizing Geospatial Dynamics of Application Usage in a 3G Cellular Data Network M. Zubair and application access, exist in cellular network usage. Such geospatial correlation patterns provide local-grained characterization of the geospatial dynamics of application usage in a 3G cellular data network. Our analysis

Fisher, Kathleen

219

Electrical Usage Profiling The roll out of Smart Meters between now and 2020 will allow  

E-Print Network [OSTI]

Electrical Usage Profiling The roll out of Smart Meters between now and 2020 will allow greatly increased analysis of a household's electricity usage and allow customised interventions in order in order to explore flexibility during the early evening peak usage time (4pm to 8pm). For each household

Aickelin, Uwe

220

Effects of Usage based Feedback on Video Retrieval: a Simulation based Study1  

E-Print Network [OSTI]

Effects of Usage based Feedback on Video Retrieval: a Simulation based Study1 DAVID VALLET ________________________________________________________________________ We present a model for exploiting community based usage information for video retrieval, where implicit usage information from past users is exploited in order to provide enhanced assistance in video

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

New Technology@Home: Impacts on Usage Behavior and Social Structures  

E-Print Network [OSTI]

New Technology@Home: Impacts on Usage Behavior and Social Structures Jan Hess, Benedikt Ley.wulf}@uni-siegen.de ABSTRACT Studying domestic usage contexts has become an important field in research. Recent technological. The adoption and appropriation of new devices and technologies has led to a more flexible usage behavior

222

An Example in Kleisli: Codon Usage Extraction Made Easy Jiren Wang and Limsoon Wong  

E-Print Network [OSTI]

An Example in Kleisli: Codon Usage Extraction Made Easy Jiren Wang and Limsoon Wong Bio,limsoong@krdl.org.sg 19 March 1999 Codon usage information was useful to many molecular biologists in designing from public DNA sequence databases and could com­ pute their codon usage. Second, we wanted

Wong, Limsoon

223

Discovery of Aggregate Usage Profiles for Web Personalization Bamshad Mobasher1  

E-Print Network [OSTI]

Discovery of Aggregate Usage Profiles for Web Personalization Bamshad Mobasher1 , Honghua Dai, Tao@cs.depaul.edu Abstract: Web usage mining, possibly used in conjunction with standard approaches to personalization data. However, the discovery of patterns from usage data by itself is not sufficient for performing

Schaefer, Marcus

224

A WSDM-based Architecture for Global Usage Characterization of Grid Computing Infrastructures  

E-Print Network [OSTI]

A WSDM-based Architecture for Global Usage Characterization of Grid Computing Infrastructures computing usage are limited in three important aspects. First, they do not provide a global, uniform view Services Distributed Management standard and on access control policies to characterize global usage

Cirne, Walfredo

225

Towards a Times-Based Usage Control Model Baoxian Zhao1  

E-Print Network [OSTI]

Towards a Times-Based Usage Control Model Baoxian Zhao1 , Ravi Sandhu2 , Xinwen Zhang3 usage of digital objects. To meet these requirements, we pre- sent a new access control model­Times-based Usage Control (TUCON). TUCON extends traditional and temporal access control models with times

Sandhu, Ravi

226

Security Enforcement Model for Distributed Usage Control Xinwen Zhang and Jean-Pierre Seifert  

E-Print Network [OSTI]

systems. However, the enabling technology for usage con- trol is a challenging problem and the space hasSecurity Enforcement Model for Distributed Usage Control Xinwen Zhang and Jean-Pierre Seifert Recently proposed usage control concept and models ex- tend traditional access control models with features

Sandhu, Ravi

227

MAPO: Mining and Recommending API Usage Patterns Hao Zhong1,2  

E-Print Network [OSTI]

MAPO: Mining and Recommending API Usage Patterns Hao Zhong1,2 , Tao Xie3, , Lu Zhang1,2 , Jian Pei4 , and Hong Mei1,2, 1 Key Laboratory of High Confidence Software Technologies, Ministry of Education, China 2 an API usage mining framework and its supporting tool called MAPO (Mining API usage Pattern from Open

Xie, Tao

228

Session Lengths and IP Address Usage of Smartphones in a University Campus WiFi  

E-Print Network [OSTI]

to laptops and desktop PCs, network usage characteristics of smartphones may differ significantly becauseSession Lengths and IP Address Usage of Smartphones in a University Campus WiFi Network be used more opportunistically. In this paper, we study two important network usage characteristics

Wang, Bing

229

Results of Comparing Bandwidth Usage and Latency: Service Location Protocol and Jini  

E-Print Network [OSTI]

Results of Comparing Bandwidth Usage and Latency: Service Location Protocol and Jini Javier Govea. This paper focuses on analyzing and evaluating two of these limitations, bandwidth usage and latency, of two present the results of our bandwidth usage analysis and the results a comparison of latency of SLP

Barbeau, Michel

230

Adopted Version 1 Georgia Tech's "BuzzPort" Portal Usage Policy  

E-Print Network [OSTI]

Adopted Version 1 Georgia Tech's "BuzzPort" Portal Usage Policy v. 7.1 1.0 PURPOSE This Policy are highly valued and sensitive Institute resources. This Policy establishes an acceptable usage framework.0 SCOPE This Policy applies to all authorized BuzzPort usage from any location at all times

Li, Mo

231

Method for preparing metal powder, device for preparing metal powder, method for processing spent nuclear fuel  

DOE Patents [OSTI]

A method for producing metal powder is provided the comprising supplying a molten bath containing a reducing agent, contacting a metal oxide with the molten bath for a time and at a temperature sufficient to reduce the metal in the metal oxide to elemental metal and produce free oxygen; and isolating the elemental metal from the molten bath.

Park, Jong-Hee (Clarendon Hills, IL)

2011-11-29T23:59:59.000Z

232

Amorphous powders of Al-Hf prepared by mechanical alloying  

SciTech Connect (OSTI)

We synthesized amorphous Al/sub 50/Hf/sub 50/ alloy powder by mechanically alloying an equimolar mixture of crystalline powders of Al and Hf using hexane as a dispersant. We characterized the powder as a function of mechanical-alloying time by scanning electron microscopy, x-ray diffraction, and differential scanning calorimetry. Amorphous Al/sub 50/Hf/sub 50/ powder heated at 10 K s/sup /minus/1/ crystallizes polymorphously at 1003 K into orthorhombic AlHf (CrB-type structure). During mechanical alloying, some hexane decomposes and hydrogen and carbon are incorporated into the amorphous alloy powder. The hydrogen can be removed by annealing the powder by hot pressing at a temperature approximately 30 K below the crystallization temperature. The amorphous compacts have a diamond pyramidal hardness of 1025 DPH. 24 refs., 7 figs., 1 tab.

Schwarz, R.B.; Hannigan, J.W.; Sheinberg, H.; Tiainen, T.

1988-01-01T23:59:59.000Z

233

NanoComposite Stainless Steel Powder Technologies  

SciTech Connect (OSTI)

Oak Ridge National Laboratory has been investigating a new class of Fe-based amorphous material stemming from a DARPA, Defense Advanced Research Projects Agency initiative in structural amorphous metals. Further engineering of the original SAM materials such as chemistry modifications and manufacturing processes, has led to the development of a class of Fe based amorphous materials that upon processing, devitrify into a nearly homogeneous distribution of nano sized complex metal carbides and borides. The powder material is produced through the gas atomization process and subsequently utilized by several methods; laser fusing as a coating to existing components or bulk consolidated into new components through various powder metallurgy techniques (vacuum hot pressing, Dynaforge, and hot isostatic pressing). The unique fine scale distribution of microstructural features yields a material with high hardness and wear resistance compared to material produced through conventional processing techniques such as casting while maintaining adequate fracture toughness. Several compositions have been examined including those specifically designed for high hardness and wear resistance and a composition specifically tailored to devitrify into an austenitic matrix (similar to a stainless steel) which poses improved corrosion behavior.

DeHoff, R.; Glasgow, C. (MesoCoat, Inc.)

2012-07-25T23:59:59.000Z

234

Synthesis of nanophase W and WC powders from ammonium metatungstate  

SciTech Connect (OSTI)

Nanophase {alpha}-W powder has been synthesized by reductive decomposition of ammonium metatungstate (AMT) at low temperatures (< 600 C). The formation of {beta}-W, which is the usual product of low temperature reduction of tungsten oxides, is avoided. Thus, it has been possible to lower the carburization temperature of W to WC to about 575 C. Nanophase WC powder (< 10 nm grain size) is produced by the low temperature carburization of nanophase {alpha}-W powder.

Gao, L.; Kear, B.H. [Rutgers, The State Univ. of New Jersey, Piscataway, NJ (United States). Dept. of Ceramic Engineering

1996-06-01T23:59:59.000Z

235

Controlled powder morphology experiments in megabar 304 stainless steel compaction  

SciTech Connect (OSTI)

Experiments with controlled morphology including shape, size, and size distribution were made on 304L stainless steel powders. These experiments involved not only the powder variables but pressure variables of 0.08 to 1.0 Mbar. Also included are measured container strain on the material ranging from 1.5% to 26%. Using a new strain controllable design it was possible to seperate and control, independently, strain and pressure. Results indicate that powder morphology, size distribution, packing density are among the pertinent parameters in predicting compaction of these powders.

Staudhammer, K.P.; Johnson, K.A.

1985-01-01T23:59:59.000Z

236

Iowa Powder Atomization Technologies, Inc. | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

complex parts very efficiently. Metal powders are mixed with a low melting plastic and injected into reusable molds, the plastic is then removed and the remaining...

237

Forming gas treatment of lithium ion battery anode graphite powders  

DOE Patents [OSTI]

The invention provides a method of making a battery anode in which a quantity of graphite powder is provided. The temperature of the graphite powder is raised from a starting temperature to a first temperature between 1000 and 2000.degree. C. during a first heating period. The graphite powder is then cooled to a final temperature during a cool down period. The graphite powder is contacted with a forming gas during at least one of the first heating period and the cool down period. The forming gas includes H.sub.2 and an inert gas.

Contescu, Cristian Ion; Gallego, Nidia C; Howe, Jane Y; Meyer, III, Harry M; Payzant, Edward Andrew; Wood, III, David L; Yoon, Sang Young

2014-09-16T23:59:59.000Z

238

Neutron Powder Diffraction and Molecular Simulation Study of...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Simulation Study of the Structural Evolution of Ammonia Borane from 15 to 340 K. Neutron Powder Diffraction and Molecular Simulation Study of the Structural Evolution of...

239

Joining of parts via magnetic heating of metal aluminum powders  

DOE Patents [OSTI]

A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

Baker, Ian

2013-05-21T23:59:59.000Z

240

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe.sub.3 Al and FeAl.

Rabin, Barry H. (Idaho Falls, ID); Wright, Richard N. (Idaho Falls, ID)

1993-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

A PRACTICAL ONTOLOGY FOR THE LARGE-SCALE MODELING OF SCHOLARLY ARTIFACTS AND THEIR USAGE  

SciTech Connect (OSTI)

The large-scale analysis of scholarly artifact usage is constrained primarily by current practices in usage data archiving, privacy issues concerned with the dissemination of usage data, and the lack of a practical ontology for modeling the usage domain. As a remedy to the third constraint, this article presents a scholarly ontology that was engineered to represent those classes for which large-scale bibliographic and usage data exists, supports usage research, and whose instantiation is scalable to the order of 50 million articles along with their associated artifacts (e.g. authors and journals) and an accompanying 1 billion usage events. The real world instantiation of the presented abstract ontology is a semantic network model of the scholarly community which lends the scholarly process to statistical analysis and computational support. They present the ontology, discuss its instantiation, and provide some example inference rules for calculating various scholarly artifact metrics.

RODRIGUEZ, MARKO A. [Los Alamos National Laboratory; BOLLEN, JOHAN [Los Alamos National Laboratory; VAN DE SOMPEL, HERBERT [Los Alamos National Laboratory

2007-01-30T23:59:59.000Z

242

Process for preparing titanium nitride powder  

DOE Patents [OSTI]

A process for making titanium nitride powder by reaction of titanium phosphates with sodium cyanide. The process of this invention may comprise mixing one or more phosphates of Ti with a cyanide salt in the absence of oxygen and heating to a temperature sufficient to cause reaction to occur. In the preferred embodiment the ratio of cyanide salt to Ti should be at least 2 which results in the major Ti-containing product being TiN rather than sodium titanium phosphate byproducts. The process is an improvement over prior processes since the byproducts are water soluble salts of sodium which can easily be removed from the preferred TiN product by washing. 2 tabs.

Bamberger, C.E.

1988-06-17T23:59:59.000Z

243

Gaseous Decomposition Products of Safety Powders  

E-Print Network [OSTI]

19.6 Volume o f a i r added 70.8 T o t a l vo lume 90 .4 Volume a f t e r e x p l o s i o n — 74.4 C o n t r a c t i o n 16.0 R e s i d u e a f t e r a b s o r p t i o n o f c a r b o n d i o x i d e 68.8 74.4 6 8 . 8 = 5 .6 . Oxygen p r e s e... DECOMPOSITION PRODUCTS OF SAFETY POWDERS. THESIS SUBMITTED FOR THE DEGREE OF BACHELOR OF SCIENCE I I THE DEPARTMENT OF CHEMICAL BHGUEBRING AT THE UNIVERSITY OF KANSAS. BY C.E.CUBBISOH 1912. RD01D7 MaDSfl COHTEHTS. * * * * Pago * P r e f a c e 6...

Cubbison, C.E.

1912-01-01T23:59:59.000Z

244

Columbia River Treaty  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

an understanding of the implications for post-2024 Treaty planning and Columbia River operations. The joint effort by the Entities to conduct initial post-2024 modeling and...

245

Saving a Dwindling River  

E-Print Network [OSTI]

information on this research is available by downloading TWRI Technical Report 291, ?Reconnaissance Survey of Salt Sources and Loading into the Pecos River,? at http://twri.tamu.edu/reports.php. The research team has also compared flow and salinity data from... Water Act, Section 319 from the U.S. Environmental Protection Agency. ?The river?s importance?historically, biologically, hydrologically and economically?to the future of the entire Pecos River Basin and the Rio Grande is huge,? said Will Hatler, project...

Wythe, Kathy

2007-01-01T23:59:59.000Z

246

Schlumberger soundings in the Upper Raft River and Raft River...  

Open Energy Info (EERE)

Schlumberger soundings in the Upper Raft River and Raft River Valleys, Idaho and Utah Abstract In 1975, the U.S. Geological Survey made seventy Schlumberger resistivity...

247

Sabine River Compact (Multiple States)  

Broader source: Energy.gov [DOE]

The Sabine River Compact Commission administers the Sabine River Compact to ensure that Texas receives its equitable share of quality water from the Sabine River and its tributaries as apportioned...

248

Sinterable powders from laser driven reactions : final report  

E-Print Network [OSTI]

Extremely fine, uniform ceramic powders have been synthesized from Sil4 NH3 and C2H4 gas phase reactants that are heated by absorbing optical energy emitted from a C02 laser. Resulting Si, Si3N4 and SiC powders have been ...

Haggerty, John Scarseth

1981-01-01T23:59:59.000Z

249

The methods of steam coals usage for coke production  

SciTech Connect (OSTI)

Nowadays, high volatile bituminous coals are broadly used for metallurgical coke production in Russia. The share of such coals in the coking blend is variable from 20 to 40% by weight. There are some large coal deposits in Kuznetskii basin which have coals with low caking tendency. The low caking properties of such coals limit of its application in the coking process. At the same time the usage of low caking coals for coke production would allow flexibility of the feedstock for coke production. Preliminary tests, carried out in COAL-C's lab has shown some differences in coal properties with dependence on the size distribution. That is why the separation of the well-caking fraction from petrographically heterogeneous coals and its further usage in coking process may be promising. Another way for low caking coals application in the coke industry is briquettes production from such coals. This method has been known for a very long time. It may be divided into two possible directions. First is a direct coking of briquettes from the low caking coals. Another way is by adding briquettes to coal blends in defined proportion and combined coking. The possibility of application of coal beneficiation methods mentioned above was investigated in present work.

Korobetskii, I.A.; Ismagilov, M.S.; Nazimov, S.A.; Sladkova, I.L.; Shudrikov, E.S.

1998-07-01T23:59:59.000Z

250

Government works with technology to boost gas output/usage  

SciTech Connect (OSTI)

Specially treated ethane gas from fields of the Moomba area in the Cooper basin of South Australia now flows freely through 870 mi of interstate gas pipeline to an end-user in Sydney, New South Wales. This unprecedented usage of ethane is the result of a long-term cooperative agreement. The producer sought to provide the end-user with ethane gas for usage as a petrochemical feedstock to manufacture ethylene and plastic goods. The end-user had strict specifications for a low-CO{sub 2}, very dry ethane product with a small percentage of methane. In order to meet these, the producer committed millions of dollars to construct a high-technology, state-of-the-art ethane treatment facility in the Moomba area, and lay an extensive pipeline. Santos also contracted with the amines supplier to provide a high-performance, deep CO{sub 2} removal solvent with good corrosion prevention characteristics. The paper discusses the Moomba field overflow, gas treatment, government cooperation, and project completion.

Nicoll, H. [Dow Chemical Co., Houston, TX (United States). GAS/SPEC Technology Group

1996-10-01T23:59:59.000Z

251

Synthesis of high purity sinterable silicon carbide powder  

SciTech Connect (OSTI)

High purity, submicron silicon carbide powders were produced via gas phase synthesis using a hydrogen/argon plasma. Two test facilities were constructed, a bench-scale unit and a larger pilot scale reactor. Three candidate silicon sources were evaluated:silicon tetrachloride (SiCl{sub 4}). dimethyldichlorosilane (CH{sub 3}){sub 2}(SiCl{sub 2}) and methyltrichlorosilane (CH{sub 3}SiCl{sub 3}). Product powders were evaluated on the basis of pressureless sinterability, surface area, agglomeration, particle size distribution, phase distribution and chemistry. Three commercial powders, Starck A10, Starck B10, and Carborundum submicron alpha silicon carbide, were also evaluated for comparison to the product powders. Powders were reproducibly synthesized at a rate of one pound per hour for standard run times of five hours. Product powders exhibited chemical and physical properties equal to or exceeding the commercial powders evaluated. In limited attempts to pressureless sinter the product powders, densities of 91% of theoretical were obtained with as-produced powder. Post-processing permitted densities in excess of 97% of theoretical. X-ray diffraction of the product indicates that the product powders are primarily beta poly-types, with traces of alpha present. Increased production rates to a target level of seven pounds per hour were not possible due to current transients produced by the pilot scale power supply. Extensive unsuccessful efforts to reduce or eliminate the transients are described. Low recovered product yields resulted from a failure of a product collection filter that was not discovered until the completion of the project.

Boecker, W.D.; Mehosky, B.L.; Rogers, R.S.C.; Storm, R.S.; Venkateswaran, V. (Carborundum Co., Niagara Falls, NY (USA). Structural Ceramics Div.)

1989-11-01T23:59:59.000Z

252

River Edge Redevelopment Zone (Illinois)  

Broader source: Energy.gov [DOE]

The purpose of the River Edge Redevelopment Program is to revive and redevelop environmentally challenged properties adjacent to rivers in Illinois.

253

Hydrodynamic effect on oil accumulation in a stratigraphic trap, Kitty Field, Powder River Basin, Wyoming  

E-Print Network [OSTI]

DeFrte& and Mr. Ambrose Lyth. Log data wer e ?v ' 1 sl&1e fcn inspc stion from Getty O' I in I:c. uston. lgpc ct a1 t. hank, !. o Mr. inar Peder:vn, Mr. Alan Cr aw&ford ;&nd lctr . Jim Acldington for Lheir he tp. The helpful suggestions and c... extend thanks to my undergraduate professors in the Geology Department at Trinity University. Their instruction and friendship were instrumental in my de- cision to continue my education. Finally, I would like to thank my friends and parents...

Larberg, Gregory Martin

1976-01-01T23:59:59.000Z

254

Three-dimensional seismic stratigraphic study of Minnelusa Formation, Powder River basin, Campbell County, Wyoming  

E-Print Network [OSTI]

complexes (Fryberger, 1984). Eagle Rock field most likely consists of a preserved eolian sand dune, cemented and capped by a thin layer of marine carbonates, and trapped by the Opeche Shale which unconformably overlies the Minnelusa Formation... producing sandstone of Eagle Rock field can be detected seismically. The producing zone is only 10-12 feet thick, but the sharp contact of high-velocity marine carbonates over the low- velocity producing sandstones creates a high impedance contrast...

Walters, Donna Lynn

1988-01-01T23:59:59.000Z

255

Hydrodynamic flow in Lower Cretaceous Muddy Sandstones, Rozet Field, Powder River Basin, Wyoming  

E-Print Network [OSTI]

/km) across the field yields a hydrodynamic oil column of 420 ft (128 m). Capillary pressure differences due to permeability changes account for a oil column of 72 ft (42 m). The combined capillary and hydrodynamic oil columns of 492 ft (150 m) compares... and other Muddy Formation oil fields. Contour interval 1000 ft (305 m). . . Regional east-west cross section showing variable sandstone development in the Muddy interval from Kitty to Rozet Fields. . . . . . . . . Diagrammatic environments the northern...

Smith, David Arthur

1984-01-01T23:59:59.000Z

256

Hydrodynamic flow in lower Cretaceous Muddy sandstone, Gas Draw Field, Powder River Basin, Wyoming  

E-Print Network [OSTI]

control readily available for analysis of rock properties and fluid pressures. The nine-township area surrounding the Gas Draw field is well-suited for study of hydrodynamic effects on oil accumulation. Regional Geology Structure The citations... of southeastern Montana. It is bounded by the Miles City arch and Black Hills uplift on the east, the Hartville uplift on the southeast, and Bighorn Mountains and Casper arch on the west. Muddy stratigraphic oil fields are located on the east flank...

Lin, Joseph Tien-Chin

1978-01-01T23:59:59.000Z

257

ASHLAND COALFIELD, POWDER RIVER BASIN, MONTANA: GEOLOGY, COAL QUALITY, AND COAL  

E-Print Network [OSTI]

RESOURCES by S.B. Roberts,1 E.M. Wilde,2 G.S. Rossi,1 Dorsey Blake,1 M.S. Ellis,1 G.D. Stricker,1 A.M. Ochs

258

DECKER COALFIELD, POWDER RIVER BASIN, MONTANA: GEOLOGY, COAL QUALITY, AND COAL  

E-Print Network [OSTI]

By S.B. Roberts,1 G.L. Gunther,2 T.T. Taber,1 A.M. Ochs,2 Dorsey Blake,1 M.S. Ellis,1 G.D. Stricker,1 E

259

Interaction of Groundwater and Surface Water in the Williston and Powder River Structural Basins  

E-Print Network [OSTI]

, Rapid City, SD 57702, email: jbednar@usgs.gov Groundwater availability in the Lower Tertiary and Upper in parts of Montana and Wyoming. Both structural basins are in the forefront of energy development associated with measuring streamflow, only fall estimates of base flow were used in the study. A net balance

Torgersen, Christian

260

Petrography and prediction of reservoir rock properties in the Sussex Sandstone, Powder River Basin, Wyoming  

E-Print Network [OSTI]

to determine rock composition and texture. Composition was established by point count of 100 grains. Framework grains were identified and counted as monocrystalline quartz, polycrystalline quartz, volcanic rock fragments, potassium feldspar, plagioclase... and quiet water deposition of shale was resumed. The sandstone is classified as a volcanic aronite based on a det: ital composition averaging 59 percent quartz, including both monccrystalline and polycrystalline varieties, 18 percent rock frag- ments...

Shirley, Richard Hoyt

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Multi-scale current activated tip-based sintering of powder-based materials  

E-Print Network [OSTI]

Japan Society for powder Metallurgy 9 B. Srinivasaro, K. Oh-PM sintering method. Powder Metallurgy 45(4):322-328 47 Z.A.Japan Society of Powder Metallurgy 57(10): 654-659 106 M.

El Desouky, Ahmed Mohamed

2012-01-01T23:59:59.000Z

262

Homogeneous Precipitation of Nickel Hydroxide Powders  

SciTech Connect (OSTI)

Precipitation and characterization of nickel hydroxide powders were investigated. A comprehensive precipitation model incorporating the metal ion hydrolysis, complexation and precipitation reactions was developed for the production of the powders with urea precipitation method. Model predictions on Ni{sup 2+} precipitation rate were confirmed with precipitation experiments carried out at 90 C. Experimental data and model predictions were in remarkable agreement. Uncertainty in the solubility product data of nickel hydroxides was found to be the large contributor to the error. There were demonstrable compositional variations across the particle cross-sections and the growth mechanism was determined to be the aggregation of primary crystallites. This implied that there is a change in the intercalate chemistry of the primary crystallites with digestion time. Predicted changes in the concentrations of simple and complex ions in the solution support the proposed mechanism. The comprehensive set of hydrolysis reactions used in the model described above allows the investigation of other systems provided that accurate reaction constants are available. the fact that transition metal ions like Ni{sup 2+} form strong complexes with ammonia presents a challenge in the full recovery of the Ni{sup 2+}. On the other hand, presence of Al{sup 3+} facilitates the complete precipitation of Ni{sup 2+} in about 3 hours of digestion. A challenge in their predictive modeling studies had been the fact that simultaneous incorporation of more than one metal ion necessitates a different approach than just using the equilibrium constants of hydrolysis, complexation and precipitation reactions. Another limitation of using equilibrium constants is that the nucleation stage of digestion, which is controlled mainly by kinetics, is not fully justified. A new program released by IBM Almaden Research Center (Chemical Kinetics Simulator{trademark}, Version 1.01) lets the user change the order of kinetic components of a reaction which was set to stoichiometric constant with which the species appear in the reaction in KINSIM by default. For instance, in the case of LDH precipitation, the new program allows to change the order of species in the reactions associated with Al{sup 3+} and let the Ni{sup 2+} reactions take over. This could be carried on iteratively until a good fit between the experimental data and the predictions were observed. However for such studies availability of accurate equilibrium constants (especially for the solubility products for the solid phase) is a prerequisite.

Bora Mavis

2003-12-12T23:59:59.000Z

263

Usage based indicators to assess the impact of scholarly works: architecture and method  

DOE Patents [OSTI]

Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

Bollen, Johan (Santa Fe, NM); Van De Sompel, Herbert (Santa Fe, NM)

2012-03-13T23:59:59.000Z

264

Morphology and composition of Ni-Co electrodeposited powders  

SciTech Connect (OSTI)

The morphology, phase and chemical composition of Ni-Co alloy powders electrodeposited from an ammonium sulfate-boric acid containing electrolyte with different ratio of Ni/Co ions were investigated. The ratios of Ni/Co ions were 1/1, 1/2 and 1/3. The morphology, chemical composition and phase composition of the electrodeposited alloy powders were investigated using AES, SEM, EDS and XRD analysis. Composition of the electrolyte, i.e. the ratio of Ni/Co concentrations was found to influence both, the alloy phase composition and the morphology of Ni-Co alloy powders. At the highest ratio of Ni/Co = 1/1 concentrations typical 2D fern-like dendritic particles were obtained. With a decrease of Ni/Co ions ratio among 2D fern-like dendrites, 3D dendrites and different agglomerates were obtained. X-ray diffraction studies showed that the alloy powders mainly consisted of the face-centered cubic {alpha}-nickel phase and hexagonal close-packed {epsilon}-cobalt phase and minor proportions of face-centered cubic {alpha}-cobalt phase. The occurrence of the latter phase was observed only in the alloy powder with the higher cobalt concentration in electrolyte. The electrodeposition of Ni-Co powders occurred in an anomalous manner. - Highlights: Black-Right-Pointing-Pointer Ni-Co alloys powders were successfully electrodeposited. Black-Right-Pointing-Pointer Composition of the electrolyte (Ni/Co ions ratio) was found to influence on morphology of powders. Black-Right-Pointing-Pointer The electrodeposition of Ni-Co powders occurred in an anomalous manner.

Maksimovic, V.M., E-mail: vesnam@vinca.rs [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Lacnjevac, U.C. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia); Stoiljkovic, M.M. [Institute of Nuclear Sciences, 'Vinca', University of Belgrade, 11001 Belgrade, P. O. Box 522 (Serbia); Pavlovic, M.G. [Institute of Electrochemistry, ICTM, University of Belgrade, 11000 Belgrade, Njegoseva 12 (Serbia); Jovic, V.D. [Institute for Multidisciplinary research, University of Belgrade, P.O. Box 33, 11030 Belgrade (Serbia)

2011-12-15T23:59:59.000Z

265

A ranking and exploration service based on large-scale usage data  

SciTech Connect (OSTI)

This poster presents the architecture and user interface of a prototype service that was designed to allow end-users to explore the s tructure of science and perform assessments of scholarly impact on the basis of large-scale usage data. The underlying usage data set was constructed by the NIESUR project which collected 1 billion usage events from a wide range of publishers, aggregators and institutional consortia.

Bollen, Johan [Los Alamos National Laboratory; Van De Sompel, Herbert L [Los Alamos National Laboratory; Balakireva, Lyudmila L [Los Alamos National Laboratory; Chute, Ryan M [Los Alamos National Laboratory

2008-01-01T23:59:59.000Z

266

amorphous ball-milled powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

, and thermal properties of Nafion powders prepared by high-energy ball milling of pellets is given. Nafion powders prepared in this manner exhibit thermal behavior similar...

267

E-Print Network 3.0 - aluminum powder mixtures Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

4210: Manufacturing Processes and Engineering Summary: .S. Colton GIT 2009 17 12;Compacting Pressures for Various Metal Powders P Metal Pressure (MPa) Aluminum... Metal Powder...

268

E-Print Network 3.0 - anthelmintic usage perspectives Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

current design guidelines 12;A perspective on the status... and Explicit Support for Usage Modes S Jha*, A ... Source: Indiana University, Pervasive Technology Laboratories,...

269

Table HC6.7 Air-Conditioning Usage Indicators by Number of Household...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Number of Household Members, 2005 Total... 111.1 30.0 34.8 18.4 15.9...

270

"Table HC11.7 Air-Conditioning Usage Indicators by Northeast...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ,"U.S. Housing Units (millions)" ,,,"Census...

271

Table HC15.7 Air-Conditioning Usage Indicators by Four Most...  

Gasoline and Diesel Fuel Update (EIA)

7 Air-Conditioning Usage Indicators by Four Most Populated States, 2005 Total... 111.1 7.1 7.0 8.0...

272

"Table HC15.7 Air-Conditioning Usage Indicators by Four Most...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","Four Most Populated States" "Air Conditioning...

273

"Table HC13.7 Air-Conditioning Usage Indicators by South Census...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division"...

274

"Table HC12.7 Air-Conditioning Usage Indicators by Midwest Census...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division"...

275

"Table HC12.13 Lighting Usage Indicators by Midwest Census Region...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Lighting Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total...

276

"Table HC13.13 Lighting Usage Indicators by South Census Region...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Lighting Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total...

277

"Table HC14.13 Lighting Usage Indicators by West Census Region...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Lighting Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total West"...

278

"Table HC11.13 Lighting Usage Indicators by Northeast Census...  

U.S. Energy Information Administration (EIA) Indexed Site

3 Lighting Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division"...

279

Characterization of Cu{sub 6}Sn{sub 5} intermetallic powders produced by water atomization and powder heat treatment  

SciTech Connect (OSTI)

Since the Cu{sub 6}Sn{sub 5} intermetallic shows its importance in industrial applications, the Cu{sub 6}Sn{sub 5} intermetallic-containing powders, produced by a powder processing route with a high production rate, were characterized. The route consisted of water atomization of an alloy melt (Cu–61 wt.% Sn) and subsequent heat treatment of the water-atomized powders. Characterization of the water-atomized powders and their heated forms was conducted by using X-ray diffraction, scanning electron microscopy and transmission electron microscopy. Fine water-atomized powder microstructures consisted of primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites coexisting with interdendritic ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic. Solidification of fine melt droplets was governed by surface nucleation and growth of the primary hexagonal ?-Cu{sub 6.25}Sn{sub 5} dendrites followed by ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid. In coarse melt droplets, nucleation and growth of primary ?-Cu{sub 3}Sn dendrites were followed by peritectic reaction (?-Cu{sub 3}Sn + liquid ? ?-Cu{sub 6.25}Sn{sub 5}) or direct crystallization of ?-Cu{sub 6.25}Sn{sub 5} phase from the undercooled melt. Finally, the ?-Cu{sub 6.25}Sn{sub 5} + ?-Sn eutectic solidification of the remnant liquid occurred. Heating of the water-atomized powders at different temperatures resulted in microstructural homogenization. The water-atomized powders with mixed phases were transformed to powders with single monoclinic ?-Cu{sub 6}Sn{sub 5} phase. - Highlights: • The Cu{sub 6}Sn{sub 5} intermetallic powder production route was proposed. • Single phase Cu{sub 6}Sn{sub 5} powders could be by water atomization and heating. • Water-atomized Cu–Sn powders contained mixed Cu–Sn phases. • Solidification and heat treatment of water-atomized Cu–Sn powders are explained.

Tongsri, Ruangdaj, E-mail: ruangdt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Yotkaew, Thanyaporn, E-mail: thanyy@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Krataitong, Rungtip, E-mail: rungtipk@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Wila, Pongsak, E-mail: pongsakw@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Sir-on, Autcharaporn, E-mail: autchars@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Muthitamongkol, Pennapa, E-mail: pennapm@mtec.or.th [Materials Characterization Research Unit (MCRU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand); Tosangthum, Nattaya, E-mail: nattayt@mtec.or.th [Powder Metallurgy Research and Development Unit (PM-RDU), National Metal and Materials Technology Center, 114 Paholyothin, Klong 1, Klong Luang, Pathum Thani 12120 (Thailand)

2013-12-15T23:59:59.000Z

280

Stabilized Lithium Metal Powder, Enabling Material and Revolutionary...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

-- Washington D.C. es011yakovleva2010o.pdf More Documents & Publications Stabilized Lithium Metal Powder, Enabling Material and Revolutionary Technology for High Energy Li-ion...

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Apparatus for making environmentally stable reactive alloy powders  

DOE Patents [OSTI]

Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloyants needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

1996-12-31T23:59:59.000Z

282

aluminum powder part: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

283

aluminum germanium powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

nuclear applications. Two specific uses for which this powder is intended are Al2O3 pellets and Al2O 3 ? B4C composite pellets for use as thermal insulator or burnable neutron...

284

Environmentally stable reactive alloy powders and method of making same  

DOE Patents [OSTI]

Apparatus and method are disclosed for making powder from a metallic melt by atomizing the melt to form droplets and reacting the droplets downstream of the atomizing location with a reactive gas. The droplets are reacted with the gas at a temperature where a solidified exterior surface is formed thereon and where a protective refractory barrier layer (reaction layer) is formed whose penetration into the droplets is limited by the presence of the solidified surface so as to avoid selective reduction of key reactive alloys needed to achieve desired powder end use properties. The barrier layer protects the reactive powder particles from environmental constituents such as air and water in the liquid or vapor form during subsequent fabrication of the powder to end-use shapes and during use in the intended service environment. 7 figs.

Anderson, I.E.; Lograsso, B.K.; Terpstra, R.L.

1998-09-22T23:59:59.000Z

285

Process for synthesizing compounds from elemental powders and product  

DOE Patents [OSTI]

A process for synthesizing intermetallic compounds from elemental powders is described. The elemental powders are initially combined in a ratio which approximates the stoichiometric composition of the intermetallic compound. The mixed powders are then formed into a compact which is heat treated at a controlled rate of heating such that an exothermic reaction between the elements is initiated. The heat treatment may be performed under controlled conditions ranging from a vacuum (pressureless sintering) to compression (hot pressing) to produce a desired densification of the intermetallic compound. In a preferred form of the invention, elemental powders of Fe and Al are combined to form aluminide compounds of Fe[sub 3] Al and FeAl. 25 figures.

Rabin, B.H.; Wright, R.N.

1993-12-14T23:59:59.000Z

286

alloyed powders kermetnye: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

287

alloy powder fabricated: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

288

alloy powders produced: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

289

alloy powders obtained: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

290

alloyed powders hyperfine: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

291

alloy powder prepared: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

292

Neutron detectors comprising ultra-thin layers of boron powder  

SciTech Connect (OSTI)

High-efficiency neutron detector substrate assemblies comprising a first conductive substrate, wherein a first side of the substrate is in direct contact with a first layer of a powder material having a thickness of from about 50 nm to about 250 nm and comprising .sup.10boron, .sup.10boron carbide or combinations thereof, and wherein a conductive material is in proximity to the first layer of powder material; and processes of making said neutron detector substrate assemblies.

Wang, Zhehul; Morris, Christopher

2013-07-23T23:59:59.000Z

293

Consolidation of aluminum 6061 powder by equal channel angular extrusion  

E-Print Network [OSTI]

, the powder is placed in a deformable mold ? often rubber, glass, or stainless steel. The container is evacuated and welded shut and then placed inside the HIP unit. A high- pressure gas or liquid surrounds the powder mold and applies pressure equally on all... oxide films and provide new surface area for welding. Next, the particles are resistance heated and pressure is applied for about 15 minutes. Applied temperatures are lower than HIP temperatures, and PAS uses much shorter consolidation times ? minutes...

Pearson, John Montgomery

1997-01-01T23:59:59.000Z

294

Quality experimental and calculated powder x-ray diffraction  

SciTech Connect (OSTI)

For several years, we have submitted quality powder XRD patterns to the International Centre for Diffraction Data for inclusion as reference standards in their Powder Diffraction File. The procedure followed is described; examples used are {beta}-UH{sub 3}, {alpha}- BaT{sub 2}, alpha-lithium disilicate ({alpha}-Li{sub 2}Si{sub 2}O{sub 5}), and 2,2`,4,4`,6,6`hexanitroazobenzene-III (HNAB-III).

Sullenger, D.B.; Cantrell, J.S.; Beiter, T.A.; Tomlin, D.W.

1996-08-01T23:59:59.000Z

295

Powder segregation during the filling of a simple die  

E-Print Network [OSTI]

. During vibratory die f il ling, f iltration of f ines through the moving powder mass is still a major cause of segregation. The vibration tends to flatten out the inner mound of fines, thereby decreasing radial segregation and increasing vertical... SEGREGATION DURING DIE FILLING 23 l. Introduction 23 2. Experimental 2. 1. Materials 2. 2. Equipment and Procedure 23 23 24 3. Results 4. Discussion 5. Conclusions 24 24 31 III. SOME EFFECTS OF VIBRATION UPON POWDER SEGREGATION DURING DIE...

Lawrence, Larry Raymond

1968-01-01T23:59:59.000Z

296

Titanium Metal Powder Production by the Plasma Quench Process  

SciTech Connect (OSTI)

The goals of this project included the scale-up of the titanium hydride production process to a production rate of 50 kg/hr at a purity level of 99+%. This goal was to be achieved by incrementally increasing the production capability of a series of reactor systems. This methodic approach was designed to allow Idaho Titanium Technologies to systematically address the engineering issues associated with plasma system performance, and powder collection system design and performance. With quality powder available, actual fabrication with the titanium hydride was to be pursued. Finally, with a successful titanium production system in place, the production of titanium aluminide was to be pursued by the simultaneously injection of titanium and aluminum precursors into the reactor system. Some significant accomplishments of the project are: A unique and revolutionary torch/reactor capable of withstanding temperatures up to 5000 C with high thermal efficiency has been operated. The dissociation of titanium tetrachloride into titanium powder and HC1 has been demonstrated, and a one-megawatt reactor potentially capable of producing 100 pounds per hour has been built, but not yet operated at the powder level. The removal of residual subchlorides and adsorbed HC1 and the sintering of powder to form solid bodies have been demonstrated. The production system has been operated at production rates up to 40 pounds per hour. Subsequent to the end of the project, Idaho Titanium Technologies demonstrated that titanium hydride powder can indeed be sintered into solid titanium metal at 1500 C without sintering aids.

R. A. Cordes; A. Donaldson

2000-09-01T23:59:59.000Z

297

OYEDOTUN, T. D. T. Urban water usages in Egbeda area of Oyo State,  

E-Print Network [OSTI]

OYEDOTUN, T. D. T. Urban water usages in Egbeda area of Oyo State, Nigeria Temitope Dare Timothy, Akungba-Akoko, Ondo State, Nigeria. (E-mail: oyedotuntim@yahoo.com ) Abstract The increasing urbanisation. 149 households were sampled to evaluate their water usages and needs through the use of prepared

Paris-Sud XI, Université de

298

Modeling the Performance and the Energy Usage of Wireless Sensor Networks by Retrial Queueing Systems  

E-Print Network [OSTI]

Modeling the Performance and the Energy Usage of Wireless Sensor Networks by Retrial Queueing and the energy usage of the sensor network. Two operations are compared. In the first case only the event driven requests can initiate reaching the radio trans- mission (RF) unit. Time driven requests have to wait

Sztrik, János

299

Developing, Deploying and Assessing Usage of a Movie Archive System Among Students of Film Studies  

E-Print Network [OSTI]

Developing, Deploying and Assessing Usage of a Movie Archive System Among Students of Film Studies Processing and 2 CLARITY: Centre for Sensor Web Technologies Dublin City University Ireland {nmohamadali deployed the system, monitored usage and gathered quantitative and qualitative data. Our findings show

Lee, Hyowon

300

Polymorphism, Subtyping, Whole Program Analysis and Accurate Data Types in Usage  

E-Print Network [OSTI]

Polymorphism, Subtyping, Whole Program Analysis and Accurate Data Types in Usage Analysis Tobias University of Technology and G¨oteborg University, {gedell,josefs}@cs.chalmers.se 2 Spotfire, Inc. Abstract. There are a number of choices to be made in the design of a type based usage analysis. Some of these are: Should

Svenningsson, Josef

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Dynamic Modeling by Usage Data for Personalization Systems Saeed R. Aghabozorgi1  

E-Print Network [OSTI]

Dynamic Modeling by Usage Data for Personalization Systems Saeed R. Aghabozorgi1 , Teh Ying Wah2 Department of Information Science, Faculty of Computer Science and Information Technology, University mining algorithms to personalize web sites' usage data. This paper proposes an off-line model based web

Hammerton, James

302

Preamble Design for Non-contiguous Spectrum Usage in Cognitive Radio Networks  

E-Print Network [OSTI]

Preamble Design for Non-contiguous Spectrum Usage in Cognitive Radio Networks Shulan Feng1 , Heather Zheng2 , Haiguang Wang1 , Jinnan Liu1 , Philipp Zhang1 Hisilicon Technologies, Beijing, China1 can synchronize on their spectrum usage patterns. However, this approach can suffer from high cost

Almeroth, Kevin C.

303

HeatProbe: A Thermal-based Power Meter for Accounting Disaggregated Electricity Usage  

E-Print Network [OSTI]

HeatProbe: A Thermal-based Power Meter for Accounting Disaggregated Electricity Usage Bo-Jhang Ho1 Technology Innovation, Academia Sinica 128, Sec. 2, Academia Rd., Taipei 115, Taiwan {cwyou, mschen}@citi.sinica.edu.tw ABSTRACT To promote energy-saving behavior, disaggregating elec- tricity usage is critical for increasing

Ouhyoung, Ming

304

Ontology-Based Services: Usage Scenarios and Test Deliverable TONES-D14  

E-Print Network [OSTI]

Ontology-Based Services: Usage Scenarios and Test Ontologies Deliverable TONES-D14 all 1 Free Participant: Hamburg University of Technology Reviewer: Bernardo Cuenca Grau Document Type: Deliverable In this deliverable we define a number of usage scenarios for tasks that have to be solved during the whole life

Moeller, Ralf

305

ENHANCING UNIVERSITY TEACHERS' INFORMATION AND COMMUNICATION TECHNOLOGY USAGE BY USING A VIRTUAL  

E-Print Network [OSTI]

1 ENHANCING UNIVERSITY TEACHERS' INFORMATION AND COMMUNICATION TECHNOLOGY USAGE BY USING A VIRTUAL) implemented to increase the use of information and communication technology (ICT) by university teachers usage in the pre-test is 1.94 and for the post-test is 2.59. The study recommends that the university

306

A GeneralizationBased Approach to Clustering of Web Usage Sessions  

E-Print Network [OSTI]

A Generalization­Based Approach to Clustering of Web Usage Sessions Yongjian Fu, Kanwalpreet Sandhu,ksandhu,mingyig@umr.edu Abstract. The clustering of Web usage sessions based on the access patterns is studied. Access patterns of Web users are extracted from Web server log files, and then organized into sessions which represent

Fu, Yongjian

307

Web Usage Mining as a Tool for Personalization: a survey D. Pierrakos+  

E-Print Network [OSTI]

1 Web Usage Mining as a Tool for Personalization: a survey D. Pierrakos+ , G. Paliouras+ , C GREECE Abstract: This paper is a survey of recent work in the field of Web Usage Mining for the benefit of research on the personalization of Web-based information services. The essence of personalization

Paliouras, George

308

The User Side of Sustainability: Modeling Behavior and Energy Usage in the Home  

E-Print Network [OSTI]

The User Side of Sustainability: Modeling Behavior and Energy Usage in the Home Chao Chena, , Diane in everyday home environments to examine the relationship between behavioral patterns and energy consumption;technologies that examine energy usage in homes and to encourage energy effi- cient behaviors, in addition

Cook, Diane J.

309

Envismo: A Mobile Platform for Collecting and Visualizing Energy Usage Data  

E-Print Network [OSTI]

Envismo: A Mobile Platform for Collecting and Visualizing Energy Usage Data Anuj Tewari University. This allows for the collection of real-time fine-grained environmental and energy usage data that can://greenbuildings.berkeley.edu), and allows us to display current and historical data from energy, steam, and water meters across the Berkeley

California at Irvine, University of

310

Water usage dropping on campus, but UT hopes to lower it more  

E-Print Network [OSTI]

Water usage dropping on campus, but UT hopes to lower it more Photo Credit: Zachary Strain | Daily six years, UT has worked to decrease its water usage, but the University still has a ways to go if it the University was using one billion gallons of water per year. Across buildings, irrigation, chilling stations

Johnston, Daniel

311

A Model-Based Approach to Synthesizing Insulin Infusion Pump Usage Parameters for Diabetic Patients  

E-Print Network [OSTI]

A Model-Based Approach to Synthesizing Insulin Infusion Pump Usage Parameters for Diabetic Patients Fainekos Abstract-- We present a model-based approach to synthesiz- ing insulin infusion pump usage parameters against varying meal scenarios and physiological conditions. Insulin infusion pumps are commonly

Sankaranarayanan, Sriram

312

SystemSens: A Tool for Monitoring Usage in Smartphone Research Deployments  

E-Print Network [OSTI]

. We have developed a general tool called Sys- temSens to help researchers capture usage context that leave their smart- phones on the desk for long periods. To help research applications capture usage and a visualization web service. This tool has been used in several deployments, where it has helped us better

Narasayya, Vivek

313

A Look At Steam Usage in William's Athletic Facilities Patrick Morrissey  

E-Print Network [OSTI]

A Look At Steam Usage in William's Athletic Facilities Patrick Morrissey Geosciences 206 Final Project Professor Dethier May 18, 2010 #12;Introduction: This paper will examine steam usage trends that Towne FH and Lansing Chapman both draw their steam from an enclosed loop heating system.23

Aalberts, Daniel P.

314

Optimisation of Fuel Usage and Steam Availability in the Power and Steam  

E-Print Network [OSTI]

Optimisation of Fuel Usage and Steam Availability in the Power and Steam Plant of a Paper Mill KEYWORDS: Model Predictive Control, Improved Efficiency, Optimisation, Power and Steam Supply System ABSTRACT This paper presents the results of a project aimed at minimising fuel usage while maximising steam

Cambridge, University of

315

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q  

E-Print Network [OSTI]

In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy q Y Biodegradation Cytotoxicity Powder metallurgy a b s t r a c t Mg/Ca (1 wt.%, 5 wt.%, 10 wt.% Ca) composites were prepared from pure magnesium and calcium powders using the powder metallurgy method, aiming to enlarge

Zheng, Yufeng

316

Powder Diffraction with Proteins Jon Wright, Irene Margiolaki, Andy Fitch and Yves Watier  

E-Print Network [OSTI]

Powder Diffraction with Proteins Jon Wright, Irene Margiolaki, Andy Fitch and Yves Watier #12 C 3Wright, Protein Powders #12;Wright, Protein Powders 4 Structure representations #12;Wright method to "solve" phase problem · What do we see in electron density maps? 6Wright, Protein Powders #12

Magee, Joseph W.

317

Beryllium usage in fusion blankets and beryllium data needs. [None  

SciTech Connect (OSTI)

Increasing numbers of designers are choosing beryllium for fusion reactor blankets because it, among all nonfissile materials, produces the highest number (2.5 neutron in an infinite media) of neutrons per 14-MeV incident neutron. In amounts of about 20 cm of equivalent solid density, it can be used to produce fissile material, to breed all the tritium consumed in ITER from outboard blankets only, and in designs to produce Co-60. The problem is that predictions of neutron multiplication in beryllium are off by some 10 to 20% and appear to be on the high side, which means that better multiplication measurements and numerical methods are needed. The n,2n reactions result in two helium atoms, which cause radiation damage in the form of hardening at low temperatures (<300/degree/C) and swelling at high temperatures (>300/degree/C). The usual way beryllium parts are made is by hot pressing the powder. A lower cost method is to cold press and then sinter. There is no radiation damage data on this form of beryllium. The issues of corrosion, safety relative to the release of the tritium built-up inside beryllium, and recycle of used beryllium are also discussed. 10 figs.

Moir, R.W.

1988-04-06T23:59:59.000Z

318

Microstructural Development in Al-Si Powder During Rapid Solidification  

SciTech Connect (OSTI)

Powder metallurgy has become an increasingly important form of metal processing because of its ability to produce materials with superior mechanical properties. These properties are due in part to the unique and often desirable microstructures which arise as a result of the extreme levels of undercooling achieved, especially in the finest size powder, and the subsequent rapid solidification which occurs. A better understanding of the fundamental processes of nucleation and growth is required to further exploit the potential of rapid solidification processing. Aluminum-silicon, an alloy of significant industrial importance, was chosen as a model for simple eutectic systems displaying an unfaceted/faceted interface and skewed coupled eutectic growth zone, Al-Si powder produced by high pressure gas atomization was studied to determine the relationship between microstructure and alloy composition as a function of powder size and atomization gas. Critical experimental measurements of hypereutectic (Si-rich) compositions were used to determine undercooling and interface velocity, based on the theoretical models which are available. Solidification conditions were analyzed as a function of particle diameter and distance from nucleation site. A revised microstructural map is proposed which allows the prediction of particle morphology based on temperature and composition. It is hoped that this work, by providing enhanced understanding of the processes which govern the development of the solidification morphology of gas atomized powder, will eventually allow for better control of processing conditions so that particle microstructures can be optimized for specific applications.

Amber Lynn Genau

2004-12-19T23:59:59.000Z

319

Method for producing microcomposite powders using a soap solution  

DOE Patents [OSTI]

A method for producing microcomposite powders for use in superconducting and non-superconducting applications. A particular method to produce microcomposite powders for use in superconducting applications includes the steps of: (a) preparing a solution including ammonium soap; (b) dissolving a preselected amount of a soluble metallic such as silver nitrate in the solution including ammonium soap to form a first solution; (c) adding a primary phase material such as a single phase YBC superconducting material in particle form to the first solution; (d) preparing a second solution formed from a mixture of a weak acid and an alkyl-mono-ether; (e) adding the second solution to the first solution to form a resultant mixture; (f) allowing the resultant mixture to set until the resultant mixture begins to cloud and thicken into a gel precipitating around individual particles of the primary phase material; (g) thereafter drying the resultant mixture to form a YBC superconducting material/silver nitrate precursor powder; and (h) calcining the YBC superconducting material/silver nitrate precursor powder to convert the silver nitrate to silver and thereby form a YBC/silver microcomposite powder wherein the silver is substantially uniformly dispersed in the matrix of the YBC material.

Maginnis, Michael A. (Coker, AL); Robinson, David A. (Mobile, AL)

1996-01-01T23:59:59.000Z

320

DEVELOPMENT OF A WIRELINE CPT SYSTEM FOR MULTIPLE TOOL USAGE  

SciTech Connect (OSTI)

The first phase of development of a wireline cone penetrometer system for multiple tool usage was completed under DOE award number DE-AR26-98FT40366. Cone penetrometer technology (CPT) has received widespread interest and is becoming more commonplace as a tool for environmental site characterization activities at several Department of Energy (DOE) facilities. Although CPT already offers many benefits for site characterization, the wireline system can improve CPT technology by offering greater utility and increased cost savings. Currently the use of multiple CPT tools during a site characterization (i.e. piezometric cone, chemical sensors, core sampler, grouting tool) must be accomplished by withdrawing the entire penetrometer rod string to change tools. This results in multiple penetrations being required to collect the data and samples that may be required during characterization of a site, and to subsequently seal the resulting holes with grout. The wireline CPT system allows multiple CPT tools to be interchanged during a single penetration, without withdrawing the CPT rod string from the ground. The goal of the project is to develop and demonstrate a system by which various tools can be placed at the tip of the rod string depending on the type of information or sample desired. Under the base contract, an interchangeable piezocone and grouting tool was designed, fabricated, and evaluated. The results of the evaluation indicate that success criteria for the base contract were achieved. In addition, the wireline piezocone tool was validated against ASTM standard cones, the depth capability of the system was found to compare favorably with that of conventional CPT, and the reliability and survivability of the system were demonstrated.

Stephen P. Farrington; Martin L. Gildea; J. Christopher Bianchi

1999-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Rivanna River Basin Commission (Virginia)  

Broader source: Energy.gov [DOE]

The Rivanna River Basin Commission is an independent local entity tasked with providing guidance for the stewardship and enhancement of the water quality and natural resources of the Rivanna River...

322

Yellowstone River Compact (North Dakota)  

Broader source: Energy.gov [DOE]

The Yellowstone River Compact, agreed to by the States of Montana, North Dakota, and Wyoming, provides for an equitable division and apportionment of the waters of the Yellowstone River, as well as...

323

P. Julien S. Ikeda River Engineering and  

E-Print Network [OSTI]

1 P. Julien S. Ikeda River Engineering and Stream Restoration Pierre Y. Julien Hong Kong - December 2004 River Engineering and Stream Restoration I - Stream Restoration Objectives Brief overview of River Engineering and Stream Restoration with focus on : 1. River Equilibrium; 2. River Dynamics; 3. River

Julien, Pierre Y.

324

Pecos River Ecosystem Monitoring Project  

E-Print Network [OSTI]

TR- 272 2004 Pecos River Ecosystem Monitoring Project C. Hart A. McDonald Texas Water Resources Institute Texas A&M University - 146 - 2003 Pecos River Ecosystem Monitoring Project... Charles R. Hart, Extension Range Specialist, Fort Stockton Alyson McDonald, Extension Assistant – Hydrology, Fort Stockton SUMMARY The Pecos River Ecosystem Project is attempting to minimize the negative impacts of saltcedar on the river ecosystem...

McDonald, A.; Hart, C.

2004-01-01T23:59:59.000Z

325

Vers un outil de co-conception produits-usages Julie MARLIER (a), Stphanie BUISINE (a), William TURNER (b)  

E-Print Network [OSTI]

Vers un outil de co-conception produits-usages Julie MARLIER (a), Stéphanie BUISINE (a), William produits et des usages sur une plate-forme dédiée à l'analyse des usages, puis de l'expérimenter au sein du'optimisation du processus de conception d'une part, à l'intégration harmonieuse de la problématique des usages

Turner, William

326

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Harris, Michael T. (Knoxville, TN); Scott, Timothy C. (Knoxville, TN); Byers, Charles H. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

327

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed.

Harris, Michael T. (Knoxville, TN); Scott, Timothy C. (Knoxville, TN); Byers, Charles H. (Oak Ridge, TN)

1992-01-01T23:59:59.000Z

328

Method and apparatus for the production of metal oxide powder  

DOE Patents [OSTI]

The present invention provides a method for preparing metal oxide powder. A first solution, which is substantially organic, is prepared. A second solution, which is an aqueous solution substantially immiscible in the first solution, is prepared and delivered as drops to the first solution. The drops of the second solution are atomized by a pulsed electric field forming micro-drops of the second solution. Reagents in the first solution diffuse into and react with reactants in the micro-drops of the second solution forming metal hydroxide or oxalate particles. The metal hydroxide or metal oxalate particles are then recovered and dried to produce the metal oxide powder. An apparatus for preparing a metal oxide powder is also disclosed. 2 figs.

Harris, M.T.; Scott, T.C.; Byers, C.H.

1992-06-16T23:59:59.000Z

329

A simple procedure to prepare spherical {alpha}-alumina powders  

SciTech Connect (OSTI)

Spherical {alpha}-alumina powders were prepared by the controlled hydrolysis of aluminum isopropoxide in a hydrolysis system consisting of octanol and acetonitrile. Diverse solvents to dissolve reactant formed diverse hydrolysis systems and affected particle shape of {alpha}-alumina powders. The precursors crystallized to {gamma}-alumina at 1000 deg. C and converted to {alpha}-alumina at 1150 deg. C without intermediate phases. The particle morphology of precursor was retained after it crystallized to {alpha}-alumina. The heating rate influenced the particle shape and the state of agglomeration during calcination process. The thermal properties of the precursors were characterized by thermal gravimetric and differential thermal analysis. X-ray diffraction technique was used to confirm the conversion of crystalline phase of alumina powders from amorphous to {alpha}-phase. Transmission electron microscopy was used to investigate the morphologies and size of the precursors and products.

Liu Hongyu [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China); Ning Guiling [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)], E-mail: ninggl@dlut.edu.cn; Gan Zhihong; Lin Yuan [State Key Laboratory of Fine Chemicals, Dalian University of Technology, Dalian 116012 (China)

2009-04-02T23:59:59.000Z

330

Aerosol flow reactor production of superconducting ceramic powder  

SciTech Connect (OSTI)

Potential applications and basic studies of superconducting ceramics require the reproducible production of chemically homogeneous, ultrapure powders with controlled particle size distributions. Previous work has mainly examined the use of liquid and solid phase methods for superconducting powder production. In this work, it is shown that carbon-free, submicron powders based on the Y-Ba-Cu-O, La-Sr-Cu-O, Bi-Ca-Sr-Cu-O and Tl-Ca-Ba-Cu-O systems can be produced in a gaseous flow system by reacting aerosol particles containing the nitrate salts of the appropriate metals in flowing oxygen at temperatures of 900 - 1100C. It is also demonstrated that composite Cu/YBa/sub 2/Cu/sub 3/O/sub 7/ wires can be fabricated by thermophoretic deposition of the particles onto the inner surface of a Cu tube hby sintering/annealing.

Kodas, T. (New Mexico Univ., Albuquerque, NM (USA). Dept. of Nuclear Engineering); Engler, E.; Lee, V.; Parkin, L.S. (Research Div., Almaden Research Center, San Jose, CA (US))

1988-01-01T23:59:59.000Z

331

Muddy River Restoration Project Begins  

E-Print Network [OSTI]

Muddy River Restoration Project Begins Page 5 #12;2 YANKEE ENGINEER February 2013 Yankee Voices of the Muddy River Restoration project. Inset photo: Flooding at the Muddy River. Materials provided by Mike Project Manager, on the passing of his father in law, Francis James (Jim) Murray, Jan. 9. ... to Laura

US Army Corps of Engineers

332

Determining Factors in the Usage of Software Applications By End Users in a Not-for-Profit Environment  

E-Print Network [OSTI]

audience of companies. Perception Technology Attitude Demographics Social Network Usage FIGURE 1: USAGEDetermining Factors in the Usage of Software Applications By End Users in a Not, The Prince, pp. 49-50 The objective of this paper is to determine which factors influence the usage

Sadeh, Norman M.

333

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored  

E-Print Network [OSTI]

Figure 1. HomeWindow showing the energy usage of several monitors, displays, and computers with colored auras. Red is high usage while green is low usage. HomeWindow: An Augmented Reality Domestic that reflects its current and historical energy use. Categories and Subject Descriptors H.5.2 [Information

Greenberg, Saul

334

Method for forming biaxially textured articles by powder metallurgy  

DOE Patents [OSTI]

A method of preparing a biaxially textured alloy article comprises the steps of preparing a mixture comprising Ni powder and at least one powder selected from the group consisting of Cr, W, V, Mo, Cu, Al, Ce, YSZ, Y, Rare Earths, (RE), MgO, CeO.sub.2, and Y.sub.2 O.sub.3 ; compacting the mixture, followed by heat treating and rapidly recrystallizing to produce a biaxial texture on the article. In some embodiments the alloy article further comprises electromagnetic or electro-optical devices and possesses superconducting properties.

Goyal, Amit (Knoxville, TN); Williams, Robert K. (Knoxville, TN); Kroeger, Donald M. (Knoxville, TN)

2002-01-01T23:59:59.000Z

335

Process for preparing fine grain titanium carbide powder  

DOE Patents [OSTI]

A method for preparing finely divided titanium carbide powder in which an organotitanate is reacted with a carbon precursor polymer to provide an admixture of the titanium and the polymer at a molecular-level due to a crosslinking reaction between the organotitanate and the polymer. The resulting gel is dried, pyrolyzed to drive off volatile components and provide carbon. The resulting solids are then heated at an elevated temperature to convert the titanium and carbon to high-purity titanium carbide powder in a submicron size range.

Janey, Mark A. (Concord, TN)

1986-01-01T23:59:59.000Z

336

Nano powders, components and coatings by plasma technique  

DOE Patents [OSTI]

Ultra fine and nanometer powders and a method of producing same are provided, preferably refractory metal and ceramic nanopowders. When certain precursors are injected into the plasma flame in a reactor chamber, the materials are heated, melted and vaporized and the chemical reaction is induced in the vapor phase. The vapor phase is quenched rapidly to solid phase to yield the ultra pure, ultra fine and nano product. With this technique, powders have been made 20 nanometers in size in a system capable of a bulk production rate of more than 10 lbs/hr. The process is particularly applicable to tungsten, molybdenum, rhenium, tungsten carbide, molybdenum carbide and other related materials.

McKechnie, Timothy N. (Brownsboro, AL); Antony, Leo V. M. (Huntsville, AL); O'Dell, Scott (Arab, AL); Power, Chris (Guntersville, AL); Tabor, Terry (Huntsville, AL)

2009-11-10T23:59:59.000Z

337

Rainfall-River Forecasting  

E-Print Network [OSTI]

;2Rainfall-River Forecasting Joint Summit II NOAA Integrated Water Forecasting Program · Minimize losses due management and enhance America's coastal assets · Expand information for managing America's Water Resources, Precipitation and Water Quality Observations · USACE Reservoir Operation Information, Streamflow, Snowpack

US Army Corps of Engineers

338

Savannah River Site Robotics  

ScienceCinema (OSTI)

Meet Sandmantis and Frankie, two advanced robotic devices that are key to cleanup at Savannah River Site. Sandmantis cleans hard, residual waste off huge underground storage tanks. Frankie is equipped with unique satellite capabilities and sensing abilties that can determine what chemicals still reside in the tanks in a cost effective manner.

None

2012-06-14T23:59:59.000Z

339

"Table HC15.13 Lighting Usage Indicators by Four Most Populated...  

U.S. Energy Information Administration (EIA) Indexed Site

Units (millions)","Four Most Populated States" "Lighting Usage Indicators",,"New York","Florida","Texas","California" "Total U.S. Housing Units",111.1,7.1,7,8,12.1 "Indoor...

340

PERSPECTIVES AND USAGE OF TECHNOLOGY OF ARABIC LANGUAGE TEACHERS IN THE UNITED ARAB EMIRATES  

E-Print Network [OSTI]

Abstract This study examined the perspectives and usage of technology by Arabic language teachers' in various schools all across The United Arab Emirates. Barriers to integrating technology were closely examined. Dimensions investigated included...

ALhumaid, Khadija Farhan

2014-05-31T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

"Table HC3.7 Air-Conditioning Usage Indicators by Owner-Occupied...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing...

342

"Table HC4.7 Air-Conditioning Usage Indicators by Renter-Occupied...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied...

343

"Table HC14.7 Air-Conditioning Usage Indicators by West Census...  

U.S. Energy Information Administration (EIA) Indexed Site

7 Air-Conditioning Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total...

344

RECS Fuel Oil Usage Form_v1 (Draft).xps  

U.S. Energy Information Administration (EIA) Indexed Site

fuel oil usage for this delivery address between September 2008 and April 2010. Delivery Number Enter the Delivery Date for each delivery 1 2 3 4 5 6 7 8 9 10 Enter the Total...

345

Improvements to building energy usage modeling during early design stages and retrofits  

E-Print Network [OSTI]

A variety of improvements to the MIT Design Advisor, a whole-building energy usage modeling tool intended for use during early design stages, are investigated. These include changes to the thermal mass temperature distribution ...

Mandelbaum, Andrew (Andrew Joseph)

2014-01-01T23:59:59.000Z

346

HIV Co-receptor Usage in HIV-related Non-Hodgkin's Lymphoma  

E-Print Network [OSTI]

receptor usage, CCR5 CXCR4, SDF-1 Introduction Highly activewith SNP analysis for the SDF 1-3’A polymorphism (Appliedsamples were testing for the SDF polymorphism and four were

Reid, Erin; Morris, Sheldon R

2012-01-01T23:59:59.000Z

347

Commercial Building Tenant Energy Usage Data Aggregation and Privacy: Technical Appendix  

SciTech Connect (OSTI)

This technical appendix accompanies report PNNL–23786 “Commercial Building Tenant Energy Usage Data Aggregation and Privacy”. The objective is to provide background information on the methods utilized in the statistical analysis of the aggregation thresholds.

Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

2014-11-12T23:59:59.000Z

348

Modern Software Product Support Processes and the Usage of Multimedia Formats  

E-Print Network [OSTI]

Modern Software Product Support Processes and the Usage of Multimedia Formats Parmit K. Chilana1 for communicating and troubleshooting, such as using screen sharing tools or attaching images and videos to requests

Toronto, University of

349

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

SciTech Connect (OSTI)

This invention relates to an improved process of preparing Bi-Sr-Ca-Cu-O (BSCCO) powders, and more particularly, to a process for preparing BSCCO powders that utilize freeze-drying. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution; grinding the flakes to form a powder; freeze-drying the frozen powder; heating the powder to form dry green precursor powders; denitrating the powders; and heating the powders to form phase-clean Bi-2223 powders.

Balachandran, U.; Krishnaraj, P.; Eror, N.G.; Lelovic, M.

1994-12-31T23:59:59.000Z

350

Oxide Dispersion Strengthened Iron Aluminide by CVD Coated Powders  

SciTech Connect (OSTI)

This I &I Category2 program developed chemical vapor deposition (CVD) of iron, aluminum and aluminum oxide coated iron powders and the availability of high temperature oxidation, corrosion and erosion resistant coating for future power generation equipment and can be used for retrofitting existing fossil-fired power plant equipment. This coating will provide enhanced life and performance of Coal-Fired Boilers components such as fire side corrosion on the outer diameter (OD) of the water wall and superheater tubing as well as on the inner diameter (ID) and OD of larger diameter headers. The program also developed a manufacturing route for readily available thermal spray powders for iron aluminide coating and fabrication of net shape component by powder metallurgy route using this CVD coated powders. This coating can also be applid on jet engine compressor blade and housing, industrial heat treating furnace fixtures, magnetic electronic parts, heating element, piping and tubing for fossil energy application and automotive application, chemical processing equipment , heat exchanger, and structural member of aircraft. The program also resulted in developing a new fabrication route of thermal spray coating and oxide dispersion strengthened (ODS) iron aluminide composites enabling more precise control over material microstructures.

Asit Biswas Andrew J. Sherman

2006-09-25T23:59:59.000Z

351

Explosively driven low-density foams and powders  

SciTech Connect (OSTI)

Hollow RX-08HD cylindrical charges were loaded with boron and PTFE, in the form of low-bulk density powders or powders dispersed in a rigid foam matrix. Each charge was initiated by a Comp B booster at one end, producing a detonation wave propagating down the length of the cylinder, crushing the foam or bulk powder and collapsing the void spaces. The PdV work done in crushing the material heated it to high temperatures, expelling it in a high velocity fluid jet. In the case of boron particles supported in foam, framing camera photos, temperature measurements, and aluminum witness plates suggest that the boron was completely vaporized by the crush wave and that the boron vapor turbulently mixed with and burned in the surrounding air. In the case of PTFE powder, X-ray photoelectron spectroscopy of residues recovered from fragments of a granite target slab suggest that heating was sufficient to dissociate the PTFE to carbon vapor and molecular fluorine which reacted with the quartz and aluminum silicates in the granite to form aluminum oxide and mineral fluoride compounds.

Viecelli, James A. (Orinda, CA); Wood, Lowell L. (Simi Valley, CA); Ishikawa, Muriel Y. (Livermore, CA); Nuckolls, John H. (Danville, CA); Pagoria, Phillip F. (Livermore, CA)

2010-05-04T23:59:59.000Z

352

Mechanical Properties of a Metal Powder-Loaded Polyurethane Foam  

SciTech Connect (OSTI)

Quasi-static compression tests have been performed on polyurethane foam specimens. The modulus of the foam exhibited a power-law dependence with respect to density of the form: E* {proportional_to} {rho}*{sup n}, where n = 1.7. The modulus data is well described by a simple geometric model (attributed to the work of Gibson and Ashby) for closed-cell foam in which the stiffness of the foam is governed by the flexure of the cell struts and cell walls. The compressive strength of the foam is also found to follow a power-law behavior with respect to foam density. In this instance, Euler buckling is used to rationalize the density dependence. The modulus of the polyurethane foam was modified by addition of a gas atomized, spherical aluminum powder. Additions of 30 and 50 weight percent of the powder significantly increased the foam modulus. However, there were only slight increases in modulus with 5 and 10 weight percent additions of the metal powder. Strength was also slightly increased at high loading fractions of powder. This increase in modulus and strength could be predicted by combining the above geometric model with a well-known model describing the effect on modulus of a rigid dispersoid in a compliant matrix.

C. L. Neuschwanger; L. L. Whinnery; S. H. Goods

1999-04-01T23:59:59.000Z

353

AN INVESTIGATION OF HYDROSTATIC EXTRUSION AND OTHER DEFORMATION MODES FOR THE FABRICATION OF MULTI-FILAMENTARY NIOBIUM-TIN SUPERCONDUCTORS BY A POWDER METALLURGY APPROACH  

E-Print Network [OSTI]

SUPERCONDUCTORS BY A POWDER METALLURGY ApPROACH By GLEN EARLTin Superconductors by a Powder Metallurgy Approach TABLE OFSUPERCONDUCTORS BY A POWDER METALLURGY APPROACH Glen Earl

MacLeod, G.E.

2010-01-01T23:59:59.000Z

354

Fabrication of NiTi shape memory alloy from elemental powders by hot isostatic pressing  

E-Print Network [OSTI]

The research involved in this thesis was conducted to develop a procedure for producing cylindrical specimens of NiTi shape memory alloy for mechanical testing from elemental powders by hot isostatic pressing. Powders were mixed to ratios of 50...

McNeese, Matthew Doyle

1997-01-01T23:59:59.000Z

355

E-Print Network 3.0 - acid whey powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

r a c t This paper describes controlled synthesis of Fe3O4 powder via... carbothermal reduction method using pure Fe2O3 powder and glucose mixture as starting materials. Pure Fe3O4...

356

Hood River Passive House  

SciTech Connect (OSTI)

The Hood River Passive Project was developed by Root Design Build of Hood River Oregon using the Passive House Planning Package (PHPP) to meet all of the requirements for certification under the European Passive House standards. The Passive House design approach has been gaining momentum among residential designers for custom homes and BEopt modeling indicates that these designs may actually exceed the goal of the U.S. Department of Energy's (DOE) Building America program to reduce home energy use by 30%-50% (compared to 2009 energy codes for new homes). This report documents the short term test results of the Shift House and compares the results of PHPP and BEopt modeling of the project.

Hales, D.

2013-03-01T23:59:59.000Z

357

STUDIES OF DESIGN PARAMETERS IN THE FABRICATION OF Nb-Al-Ge SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHOD  

E-Print Network [OSTI]

TicltcJ by a Powder Metallurgy Approach, (D. Eng. Thesis)SUPERCONDUCTORS BY THE POWDER METALLURGY INFILTRATION METHODBY TrIE POWDER METALLURGY INFILTRATION METHOD Jose J. Granda

Granda, J.J.

2010-01-01T23:59:59.000Z

358

Nonaqueous solution synthesis process for preparing oxide powders of lead zirconate titanate and related materials  

DOE Patents [OSTI]

A process is disclosed for producing powders of perovskite-type compounds which comprises mixing a metal alkoxide solution with a lead acetate solution to form a homogeneous, clear metal solution, adding an oxalic acid/n-propanol solution to this metal solution to form an easily filterable, free-flowing precursor powder and then calcining this powder. This process provides fine perovskite-phase powders with ferroelectric properties which are particularly useful in a variety of electronic applications. 4 figs.

Voigt, J.A.; Sipola, D.L.; Tuttle, B.A.; Anderson, M.T.

1999-06-01T23:59:59.000Z

359

Stabilized Lithium Metal Powder, Enabling Material and Revolutionary  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartmentScopingOverview * Analyzer IDepartmentLayered

360

Stabilized Lithium Metal Powder, Enabling Material and Revolutionary  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartmentScopingOverview * Analyzer IDepartmentLayeredTechnology

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

"Ceramics and high-temperature composites, silicides" Oxidation of Stainless Steel Powder  

E-Print Network [OSTI]

: Powder, stainless steel, oxidation INTRODUCTION Ceramic matrix composites dispersed with metal particles"Ceramics and high-temperature composites, silicides" CHTC9 Oxidation of Stainless Steel Powder. To understand the corrosion behavior of a model 304L(p)-ZrO2(s) composite, a 304L stainless steel powder has

Paris-Sud XI, Université de

362

Louisiana Nuclear Profile - River Bend  

U.S. Energy Information Administration (EIA) Indexed Site

River Bend" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

363

Florida Nuclear Profile - Crystal River  

U.S. Energy Information Administration (EIA) Indexed Site

Crystal River1" "Unit","Summer capacity (mw)","Net generation (thousand mwh)","Summer capacity factor (percent)","Type","Commercial operation date","License expiration date"...

364

Aquatic Supplement Hood River Subbasin  

E-Print Network [OSTI]

.7 (10 cfs) 50 powerhouse discharge river mile 4.51 (20 cfs) Upper Lenz or Odell cr no info Davis water

365

Susquehanna River Basin Compact (Maryland)  

Broader source: Energy.gov [DOE]

This legislation enables the state's entrance into the Susquehanna River Basin Compact, which provides for the conservation, development, and administration of the water resources of the...

366

Rappahannock River Basin Commission (Virginia)  

Broader source: Energy.gov [DOE]

The Rappahannock River Basin Commission is an independent local entity tasked with providing guidance for the stewardship and enhancement of the water quality and natural resources of the...

367

Report on Characterization and Processing of MDD Powder  

SciTech Connect (OSTI)

Uranium oxide powers most civilian nuclear reactors worldwide. A large infrastructure based on a well-established technology is in place to support this strategic component of the energy industry. Because uranium oxide fuels are used so ubiquitously, it is expected that ceramic fuel pellets will continue to be used. A better understanding of the properties of the starting materials, the processing methods used to fabricate fuel pellets and how the properties of pellets change in service, are important aspects being studied via experiments, models and simulations. A close integration of these approaches is essential if we are to find new ways to optimize both the fuel composition and structure for the purpose of improving performance, e.g., designed microstructures, reducing process losses, e.g. by net shape sintering, and enabling reprocessing of used fuel; e.g., incorporation of transuranics. Ceramic oxide fuel pellets are typically cold pressed and sintered from a powder feedstock. Consequently, a complete understanding of pellet fabrication requires a thorough knowledge of the process from powder synthesis through quality control and acceptance. In this study, uranium oxide powder synthesized by Modified Direct Denitration (MDD) is evaluated. Use of powders synthesized by novel, simplified approaches such as MDD are both a challenge and an opportunity. The MDD synthesis process offers an opportunity to simplify the fabrication process potentially reducing process losses. MDD also provides a simple path to incorporate transuranics from used fuel reprocessing with minimal handling. The challenge is to demonstrate and ultimately prove the reliability and reproducibility of simplified processing with the performance of fuel pellets experiencing in-pile service. This report summarizes a processing study of uranium oxide pellets made from MDD uranium oxide.

Luther, Erik Paul [Los Alamos National Laboratory

2012-08-21T23:59:59.000Z

368

Low temperature fabrication from nano-size ceramic powders  

SciTech Connect (OSTI)

The objective of the compaction process is to produce a dense green-state compact from a nanosize powder that subsequently can be sintered at high temperatures to form a dense ceramic piece. High density in the green-state after pressing is of primary importance for achieving high densities after sintering. Investigation of the compaction behavior of ceramic powders, therefore, is an important part of characterization of raw ceramic powders and evaluation of their compaction behavior, analysis of interaction between particles, and the study of microstructure of green body (unsintered) during pressure-forming processes. The compaction of nanosize ceramic particles into high density green bodies is very difficult. For the nanosize materials used in this study (amorphous Si{sub 3}N{sub 4} and {gamma} Al{sub 2}O{sub 3}), there is no evidence by TEM of partial sintering after synthesis. Nevertheless, strong aggregation forces, such as the van der Waals surface forces of attraction, exist and result in moderate precursor particle agglomeration. More importantly, these attractive surface forces, which increase in magnitude with decreasing particle size, inhibit interparticle sliding necessary for particle rearrangement to denser bodies during subsequent compaction. Attempts to produce high density green body compacts of nanosize particles, therefore, generally have been focused on overcoming these surface forces of attraction by using either dispersive fluids or high pressures with or without lubricating liquids. In the present work, the use of high pressure has been employed as a means of compacting nanosize powders to relatively high green densities.

Gonzalez, E.J.; Piermarini, G.J.; Hockey, B. [and others

1995-06-01T23:59:59.000Z

369

South Carolina Scenic Rivers Act (South Carolina)  

Broader source: Energy.gov [DOE]

The goal of the Scenic Rivers Act is to protect selected rivers or river segments of the State with outstanding scenic, recreational, geologic, botanical, fish, wildlife, historic, or cultural...

370

Ohio River Greenway Development Commission (Indiana)  

Broader source: Energy.gov [DOE]

The Ohio River Greenway Development Commission administers the Ohio River Greenway Project, which is a park along a 7-mile stretch of the Ohio River. The Commission developed a master plan for the...

371

Natural, Scenic, and Recreational River System (Indiana)  

Broader source: Energy.gov [DOE]

Rivers may fall under the categories of natural, scenic, or recreational. These rivers are designated, acquired, and preserved by the state, and development on or adjacent to these rivers is...

372

RIVER RESEARCH AND APPLICATIONS River Res. Applic. 21: 849864 (2005)  

E-Print Network [OSTI]

to assimilate wastewater treatment plant effluent. Our study illustrates the types of changes that river of future climate scenarios on flow regimes and how predicted changes might affect river ecosystems. We under future climate scenarios to describe the extent and type of changes predicted to occur. Daily

Poff, N. LeRoy

373

Heavy-duty truck population, activity and usage patterns. Final report  

SciTech Connect (OSTI)

The objective of the study was to update the heavy-duty truck (HDT) population, activity (e.g., vehicle miles traveled (VMT), numbers of starts and trips, trip duration, etc.), and usage patterns type of service/business (e.g., delivery, construction, etc.), area of operation (i.e., local, short-haul, long-haul) for HDT`s registered and/or operated in California. The population and activity estimates were done on a weight-class-specific basis light-heavy-duty, medium-heavy-duty and heavy-heavy-duty. Population, activity and usage estimates were based primarily on Department of Motor Vehicles (DMV) registration data and Truck Inventory and Usage Survey (TIUS) data. In addition to the analysis of existing data (i.e., DMV and TIUS), 42 HDTs were fitted with on-board data loggers that recorded numbers of trips and starts, daily VMT and travel by time-of-day.

Fischer, M.

1998-07-01T23:59:59.000Z

374

Enforcement Letter, Westinghouse Savannah River Company - November...  

Broader source: Energy.gov (indexed) [DOE]

Savannah River Site On November 14, 2003, the U.S. Department of Energy (DOE) issued a nuclear safety Enforcement Letter to Westinghouse Savannah River Company related to...

375

Independent Oversight Review, Savannah River Operations Office...  

Energy Savers [EERE]

Savannah River Operations Office - July 2013 Independent Oversight Review, Savannah River Operations Office - July 2013 July 2013 Review of the Employee Concerns Program at the...

376

Independent Activity Report, Savannah River Operation - June...  

Broader source: Energy.gov (indexed) [DOE]

Operation - June 2010 Independent Activity Report, Savannah River Operation - June 2010 June 2010 Savannah River Operations Office Self-Assessment of the Technical Qualification...

377

Independent Activity Report, Savannah River Site - September...  

Office of Environmental Management (EM)

September 2010 Independent Activity Report, Savannah River Site - September 2010 Savannah River Site Salt Waste Processing Facility Effectiveness Review The U.S. Department of...

378

New Savannah River Site Deputy Manager Named  

Broader source: Energy.gov [DOE]

AIKEN, S.C. – DOE’s Savannah River Operations Office selected Terrel “Terry” J. Spears as the deputy manager of the Savannah River Site (SRS) this month.

379

Independent Oversight Activity Report, Savannah River Site -...  

Office of Environmental Management (EM)

Activity Report, Savannah River Site - February 2014 February 2014 Operational Awareness Visit of the Savannah River Site HIAR-SRS-2014-02-25 This Independent Activity...

380

PIA - Savannah River Nuclear Solutions Electronic Safeguards...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solutions Electronic Safeguards Security System (E3S) PIA - Savannah River Nuclear Solutions Electronic Safeguards Security System (E3S) PIA - Savannah River Nuclear Solutions...

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Hood River Passive House  

SciTech Connect (OSTI)

The Hood River Passive Project was developed by Root Design Build of Hood River Oregon using the Passive House Planning Package (PHPP) to meet all of the requirements for certification under the European Passive House standards. The Passive House design approach has been gaining momentum among residential designers for custom homes and BEopt modeling indicates that these designs may actually exceed the goal of the U.S. Department of Energy's (DOE) Building America program to reduce home energy use by 30%-50% (compared to 2009 energy codes for new homes). This report documents the short term test results of the Shift House and compares the results of PHPP and BEopt modeling of the project. The design includes high R-Value assemblies, extremely tight construction, high performance doors and windows, solar thermal DHW, heat recovery ventilation, moveable external shutters and a high performance ductless mini-split heat pump. Cost analysis indicates that many of the measures implemented in this project did not meet the BA standard for cost neutrality. The ductless mini-split heat pump, lighting and advanced air leakage control were the most cost effective measures. The future challenge will be to value engineer the performance levels indicated here in modeling using production based practices at a significantly lower cost.

Hales, D.

2014-01-01T23:59:59.000Z

382

A Large-scale Study on Predicting and Contextualizing Building Energy Usage J. Zico Kolter  

E-Print Network [OSTI]

fuels (Multiple 2009). In the United States, 41% of all energy is consumed in residential and commercial people with feedback about their energy use can itself produce behavior changes that significantly reduce the value of normative energy feedback, showing users how their usage relates to that of their peers

Kolter, J. Zico

383

Instructions for CEC-1250E-4 Biomass and Fossil Fuel Usage Report for Biomass Facilities  

E-Print Network [OSTI]

Instructions for CEC-1250E-4 Biomass and Fossil Fuel Usage Report for Biomass Facilities Biomass energy input basis in the upcoming calendar year? - Please check "yes" or "no." 12. Types of Biomass Fuel Used - Please report the quantity and supplier of the following types of biomass fuel used

384

Computer Usage by Young Individuals with Down Syndrome: An Exploratory Study  

E-Print Network [OSTI]

Computer Usage by Young Individuals with Down Syndrome: An Exploratory Study Jinjuan Feng, Jonathan that investigates how children and young adults with Down syndrome use computers and computer-related devices. The survey responses cover 561 individuals with Down syndrome between the age of four to 21. The survey

Lazar, Jonathan

385

Supporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1  

E-Print Network [OSTI]

Supporting Mobile Service Usage through Physical Mobile Interaction Gregor Broll1 , Sven Siorpaes1 albrecht.schmidt@ifi.lmu.de Abstract Although mobile services can be used ubiquitously, their employment and the interaction with them are still restricted by the constraints of mobile devices. In order to facilitate

386

Rainwater usagePage 1 of 2 a Parliamentary initiative (10.503) launched by National  

E-Print Network [OSTI]

that percolates into the soil. eawag research projects show that the collection and storage of rainwater is costlyRainwater usagePage 1 of 2 Fact Sheet a Parliamentary initiative (10.503) launched by National water as a result. In addition, the initiative is seeking to increase the amount of rainwater

Wehrli, Bernhard

387

ADAPTIVE WEB SITES BY WEB USAGE MINING Yongjian Fu Mario Creado MingYi Shih  

E-Print Network [OSTI]

ADAPTIVE WEB SITES BY WEB USAGE MINING Yongjian Fu Mario Creado Ming­Yi Shih Department of Computer An approach for reorganizing a Web site based on user access patterns is proposed. The Web server's log files and the Web pages on the site are first preprocessed to obtain the access statistics of the Web pages

Fu, Yongjian

388

The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms  

E-Print Network [OSTI]

The Portable Extensible Toolkit for Scientific computing Day 1: Usage and Algorithms Jed Brown CSCS runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS 2010-05-10 5) · Same code runs performantly on a laptop · No iPhone support Jed Brown (ETH Zürich) PETSc day 1 CSCS

389

Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage Yuvraj Agarwal  

E-Print Network [OSTI]

Somniloquy: Augmenting Network Interfaces to Reduce PC Energy Usage Yuvraj Agarwal , Steve Hodges@cs.ucsd.edu Abstract Reducing the energy consumption of PCs is becoming in- creasingly important with rising energy costs and environmen- tal concerns. Sleep states such as S3 (suspend to RAM) save energy, but are often

Zhou, Yuanyuan

390

Lifestyle studies Market demand Usage patterns Funding: Calif. Energy Commission, BMW, Calif. ARB, ECOtality  

E-Print Network [OSTI]

as much energy as it consumes. When done in 2014, the 130-acre UC Davis West Village will be home to 3Consumers Lifestyle studies · Market demand · Usage patterns Funding: Calif. Energy Commission, BMW operation · Energy savings Funding: Chrysler, US Dept of Energy Lead researcher: Kevin Nesbitt, Ph

California at Davis, University of

391

Determine Vehicle Usage and Refueling Trends to Minimize Greenhouse Gas Emissions  

Broader source: Energy.gov [DOE]

Once a Federal agency has identified its most important mobile greenhouse gas (GHG) emission sources overall, it can work with individual sites to determine vehicle usage and refueling trends. Agencies can compare the results of this analysis to internal standards and requirements to identify GHG mitigation opportunities for assets that are underperforming or underutilized.

392

Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey  

E-Print Network [OSTI]

Mining Usage Data and Development Artifacts Olga Baysal, Reid Holmes, and Michael W. Godfrey Software Architecture Group (SWAG) David R. Cheriton School of Computer Science, University of Waterloo {obaysal, rtholmes, migod}@uwaterloo.ca Abstract--Software repository mining techniques generally focus

Godfrey, Michael W.

393

UDP: Usage-based Dynamic Pricing with Privacy Preservation for Smart Grid  

E-Print Network [OSTI]

overhead, we introduce distributed community gateways as proxies of the utility company to timely respond are managed adaptively to meet the electricity generation and distribution capabilities at any time be optimally utilized in real time. In this paper, we propose a usage-based dynamic pricing (UDP) scheme

Shen, Xuemin "Sherman"

394

MINIMIZATION OF SENSOR USAGE FOR TARGET TRACKING IN A NETWORK OF IRREGULARLY SPACED SENSORS  

E-Print Network [OSTI]

MINIMIZATION OF SENSOR USAGE FOR TARGET TRACKING IN A NETWORK OF IRREGULARLY SPACED SENSORS Thomas address the following scenario: a single target moves through a field of stationary sensors with known locations. At each time epoch, each sensor is either active or not; each active sensor outputs either target

Morrell, Darryl

395

Usage of Assignable Space 78 Number of Buildings and Square Metres 79  

E-Print Network [OSTI]

of University of Toronto Students in Residence 81 77 #12;USAGE OF ASSIGNABLE SPACE 2008-09 ST. GEORGE 2009 NUMBER OF NET ASSIGNABLE NET SQUARE GROSS BUILDINGS SQUARE METRES METRES SQUARE METRES University St. George 120 617,032 1,004,611 1,170,350 Leased St. George 5 3,052 3,786 4,255 Scarborough 33 63

Sun, Yu

396

Data and analysis on energy usage included: Taking readings on energy each minute  

E-Print Network [OSTI]

Appendix B Data and analysis on energy usage included: § Taking readings on energy each minute § 14 Changes from A/V to General Room 22 Changes from General to A/V The Control Room uses 82% more energy than and presents it graphically for easy interpretation. The graphs below compare an ICLS classroom to the Control

397

Promiscuous Usage of Nucleotides by the DNA Helicase of Bacteriophage T7  

E-Print Network [OSTI]

Promiscuous Usage of Nucleotides by the DNA Helicase of Bacteriophage T7 DETERMINANTS OF NUCLEOTIDE activity. Very little is known regarding the architecture of the nucleotide binding site in determining nucleotide specificity. Crystal structures of the T7 helicase domain with bound dATP or dTTP identified Arg

Richardson, Charles C.

398

Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees  

E-Print Network [OSTI]

1 Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees Longbo Huang, Jean the utility company to jointly perform power procurement and demand response so as to maximize the social are the inte- gration of renewable energy technologies [1] and the design of efficient user demand-response

Huang, Longbo

399

Semantic Analysis of Web Site Audience by Integrating Web Usage Mining and Web  

E-Print Network [OSTI]

Semantic Analysis of Web Site Audience by Integrating Web Usage Mining and Web Content Mining Jean://www.jrc.it/langtech Abstract. With the emergence of the World Wide Web, analyzing and improving Web communication has become essential to adapt the Web content to the visitors' expectations. Web communication analysis

Libre de Bruxelles, Université

400

ON THE USAGE OF ANTENNAS IN MIMO AND MISO INTERFERENCE CHANNELS Mariam Kaynia  

E-Print Network [OSTI]

ON THE USAGE OF ANTENNAS IN MIMO AND MISO INTERFERENCE CHANNELS Mariam Kaynia , Andrea J. Goldsmith case of a MISO chan- nel is considered, where exact expressions for the ergodic capac- ity of the capacity of a MISO broadcast channel with a random beamformer is derived. However, the impact

Gesbert, David

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Investigation on the performance of airliner cabin air filter throughout the lifetime usage  

E-Print Network [OSTI]

of Pollution Control and Resource Reuse, Tongji University, 1239 Siping Road, Shanghai, China 200092 2 School' exposure to particulate pollutants, most of aircraft environmental control systems have been installed1 Investigation on the performance of airliner cabin air filter throughout the lifetime usage Bin

Chen, Qingyan "Yan"

402

Policy recommendations for public administrators on free and open source software usage  

E-Print Network [OSTI]

and requirements. In this sense, adopting software environments in public Information Technology (IT) 0736'' software are used interchangeably throughout this manuscript to refer to software that is developedPolicy recommendations for public administrators on free and open source software usage Christos

Bouras, Christos

403

Impact of Liquefied Natural Gas usage and payload size on Hybrid Wing Body aircraft fuel efficiency  

E-Print Network [OSTI]

This work assessed Hybrid Wing Body (HWB) aircraft in the context of Liquefied Natural Gas (LNG) fuel usage and payload/range scalability at three scales: H1 (B737), H2 (B787) and H3 (B777). The aircraft were optimized for ...

Mody, Pritesh (Pritesh Chetan)

2010-01-01T23:59:59.000Z

404

USAGES OF THE INTERNET AND e-TOURISM. TOWARDS A NEW ECONOMY OF TOURISM  

E-Print Network [OSTI]

1 USAGES OF THE INTERNET AND e-TOURISM. TOWARDS A NEW ECONOMY OF TOURISM Christian Longhi on the organization of industry and the market dynamics in the tourism activities, focusing in the European scene. Tourism incorporates many features of the contemporaneous information and communication economy. Even if e-tourism

Paris-Sud XI, Université de

405

Structural studies of magnesium nitride fluorides by powder neutron diffraction  

SciTech Connect (OSTI)

Samples of ternary nitride fluorides, Mg{sub 3}NF{sub 3} and Mg{sub 2}NF have been prepared by solid state reaction of Mg{sub 3}N{sub 2} and MgF{sub 2} at 1323-1423 K and investigated by powder X-ray and powder neutron diffraction techniques. Mg{sub 3}NF{sub 3} is cubic (space group: Pm3m) and has a structure related to rock-salt MgO, but with one cation site vacant. Mg{sub 2}NF is tetragonal (space group: I4{sub 1}/amd) and has an anti-LiFeO{sub 2} related structure. Both compounds are essentially ionic and form structures in which nitride and fluoride anions are crystallographically ordered. The nitride fluorides show temperature independent paramagnetic behaviour between 5 and 300 K. - Graphical abstract: Definitive structures of the ternary magnesium nitride fluorides Mg{sub 3}NF{sub 3} and the lower temperature polymorph of Mg{sub 2}NF have been determined from powder neutron diffraction data. The nitride halides are essentially ionic and exhibit weak temperature independent paramagnetic behaviour. Highlights: Black-Right-Pointing-Pointer Definitive structures of Mg{sub 3}NF{sub 3} and Mg{sub 2}NF were determined by neutron diffraction. Black-Right-Pointing-Pointer Nitride and fluoride anions are crystallographically ordered in both structures. Black-Right-Pointing-Pointer Both compounds exhibit weak, temperature independent paramagnetic behaviour. Black-Right-Pointing-Pointer The compounds are essentially ionic with ionicity increasing with F{sup -} content.

Brogan, Michael A. [School of Chemistry, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Hughes, Robert W. [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom); Smith, Ronald I. [ISIS Pulsed Neutron and Muon Source, Science and Technology Facilities Council, Rutherford Appleton Laboratory, Harwell Oxford, Didcot OX11 0QX (United Kingdom); Gregory, Duncan H., E-mail: Duncan.Gregory@glasgow.ac.uk [WestCHEM, School of Chemistry, University of Glasgow, Glasgow G12 8QQ (United Kingdom)

2012-01-15T23:59:59.000Z

406

Bulk synthesis of nanoporous palladium and platinum powders  

DOE Patents [OSTI]

Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

Robinson, David B; Fares, Stephen J; Tran, Kim L; Langham, Mary E

2014-04-15T23:59:59.000Z

407

Bulk synthesis of nanoporous palladium and platinum powders  

DOE Patents [OSTI]

Disclosed is a method for providing nanoporous palladium and platinum powders. These materials were synthesized on milligram to gram scales by chemical reduction of tetrahalo-complexes with ascorbate in a concentrated aqueous surfactant at temperatures between -20.degree. C. and 30.degree. C. The prepared particles have diameters of approximately 50 nm, wherein each particle is perforated by pores having diameters of approximately 3 nm, as determined by electron tomography. These materials are of potential value for hydrogen and electrical charge storage applications.

Robinson, David B. (Fremont, CA); Fares, Stephen J. (Pleasanton, CA); Tran, Kim L. (Livermore, CA); Langham, Mary E. (Pleasanton, CA)

2012-04-17T23:59:59.000Z

408

Wood River Levee Reconstruction, Madison County, IL  

E-Print Network [OSTI]

Wood River Levee Reconstruction, Madison County, IL 25 October 2006 Abstract: The recommended plan provides for flood damage reduction and restores the original degree of protection of the Wood River Levee-federal sponsor is the Wood River Drainage and Levee District. The Wood River Levee System was authorized

US Army Corps of Engineers

409

RiverFalls,Wisconsin SolarinSmall  

E-Print Network [OSTI]

, the local government, and the citizens of River Falls have made energy conservation and renewable energy. Inspiring Interest in Renewables River Falls' energy conservation efforts benefit from RFMU's membership energy within the community.v Bringing Solar to River Falls The success of the River Falls Renewable

410

SAVANNAH RIVER SITE A PUIIUCATION OF THE SAVANNAII RIVER ECOI"OGY LAIIORATORY  

E-Print Network [OSTI]

OF THE SAVANNAH RIVER SITE A PUIIUCATION OF THE SAVANNAII RIVER ECOI"OGY LAIIORATORY NATIONAL of the Savannah River Site National Environmental Research Park Program Publication number: SRO-NERP-2S Printed OF THE SAVANNAH RIVER SITE BY CHARLES E. DAVIS AND LAURA L. JANECEK A PUBLICATION OF THE SAVANNAH RIVER SITE

Georgia, University of

411

The Columbia River Estuary the Columbia River Basin  

E-Print Network [OSTI]

" fish and wildlife in the Columbia River as affected by development and operation of the hydroelectric modified in terms of physical and biological processes. The development and operation of the hydroelectric

412

Large-Scale Mining of Usage Data on Web Sites Georgios Paliouras,* Christos Papatheodorou,+ Vangelis Karkaletsis,* Panayotis Tzitziras,+  

E-Print Network [OSTI]

Large-Scale Mining of Usage Data on Web Sites Georgios Paliouras,* Christos Papatheodorou and Telecommunications, + Division of Applied Technologies, National Centre for Scientific Research (NCSR) "Demokritos of trends in the usage of large Web-based information systems. This approach is based on the empirical

Paliouras, George

413

Densification of nanosized alumina powders by hot isostatic pressing (HIP)  

SciTech Connect (OSTI)

The densification of nanosized alumina powders to compacts of nearly theoretical density by Hot Isostatic Pressing was the aim of this work. Three types of powders produced by the so called exploding wire technique in the mesh size between 20 to 80 nm were used. Because of the big internal friction during dry pressing the densities achieved were only in the range of about 30% TD. Therefore it was necessary to use a second post densification step by cold isostatic pressing (CIP). With pressures as high as 750 MPa the authors received a density of 58% TD. The pellets were sealed in capsules of stainless steel which were densified at different temperatures between 900 C and 1,350 C with pressures between 120 and 300 MPa. The resulting compacts were examined by scanning electron microscopy. The resulting phases were determined by X-ray diffraction. Grain size measurement at the as fabricated compacts was a decisive criterion for the success of the experiments.

Weimar, P.; Knitter, R.; Szabo, D.V. [Forschungszentrum, Karlsruhe (Germany); Krauss, W.

1996-12-31T23:59:59.000Z

414

Helium/solid powder O-ring leakage correlation experiments  

SciTech Connect (OSTI)

We have developed a method to test powder leakage that has passed O-ring seals. To validate this method we have spiked a test fixture with 98 ng of U and recovered 130 +- 25 ng of U. We did not detect U at a detection limit of 26 ng in a fixture which was treated as a blank. This method has been applied to the leakage of UO/sub 2/ powder passing the type of EPDM O-ring seals used in a SNM shipping cask belonging to PNC. Considering the three experimental tests in which no or very small quantities of U were detected as effective blank test, it appears that the level of external contamination is negligible. Therefore, we believe that the U quantities greater than 26 ng (6 tests) passed the primary O-ring seal. From this limited quantity of data, we observe no apparent correlation between the amount of U measured and either helium leak rate or equivalent tube diameter. The data for the 130/sup 0/C tests indicate the possibility of a U/time relationship; however, more data are needed for verification.

Leisher, W.B.; Weissman, S.H.; Tallant, D.R.; Kubo, M.

1983-01-01T23:59:59.000Z

415

Production and Characterization of Atomized U-Mo Powder by the Rotating Electrode Process  

SciTech Connect (OSTI)

In order to produce feedstock fuel powder for irradiation testing, the Idaho National Laboratory has produced a rotating electrode type atomizer to fabricate uranium-molybdenum alloy fuel. Operating with the appropriate parameters, this laboratory-scale atomizer produces fuel in the desired size range for the RERTR dispersion experiments. Analysis of the powder shows a homogenous, rapidly solidified microstructure with fine equiaxed grains. This powder has been used to produce irradiation experiments to further test adjusted matrix U-Mo dispersion fuel.

C.R. Clark; B.R. Muntifering; J.F. Jue

2007-09-01T23:59:59.000Z

416

Massachusetts Rivers Protection Act (Massachusetts)  

Broader source: Energy.gov [DOE]

The law creates a 200-foot riverfront area that extends on both sides of rivers and streams. The riverfront area is 25 feet in the following municipalities: Boston, Brockton, Cambridge, Chelsea,...

417

Case Studies in River Management  

E-Print Network [OSTI]

of the Middle Rio Grande --Discharge Analysis --Reservoir Level Analysis Site Description and Background --History of the Middle Rio Grande --Discharge Analysis --Reservoir Level Analysis Aggradation of Abandoned Channels Cheongmi Stream and Mangyeong River Cheongmi Stream South Korea In Collaboration

Julien, Pierre Y.

418

Star Lakes and Rivers (Minnesota)  

Broader source: Energy.gov [DOE]

An association organized for the purpose of addressing issues on a specific lake or river, a lake improvement district, or a lake conservation district may apply to the Star Lake Board for...

419

Energy development and water options in the Yellowstone River Basin  

SciTech Connect (OSTI)

Using a mixed-integer programming model, the impacts of institutional constraints on the marginal capacity for energy development in the Yellowstone River Basin and consequent hydrologic changes were examined. Under average annual flow conditions, energy outputs in the Yellowstone Basin can increase roughly nine times by 1985 and 12 to 18 times by 2000. In contrast, water availability is limiting energy development in the Tongue and Powder River Basins in Wyoming. Variability in hydrologic regime causes model solutions to change drastically. If flows decrease to 80 and 60% of average annual levels, the energy production is decreased by 17 and 95%, respectively. If development strategies in the basin are followed on the basis of 80% average annual flows, the Buffalo Bill enlargement (271,300 acre-ft), Tongue River Modification (58,000 acre-ft), and the two reservoirs at Sweetgrass Creek (each 27,000 acre-ft) will be necessary, in addition to several small storage facilities, to best meet the instream flow needs in Montana and to deliver the waters apportioned by compact between Wyoming and Montana. Furthermore, the results indicate that relaxing the instream flow requirements from recommended levels by 10% could increase regional energy output by 19% in 1985 and 35% in 2000. This model illustrates that modifications in institutional restrictions to achieve greater water mobility between users in a given state, as well as flexible practices for transferring water between states, can assist economic growth. Thus, the probability for restricted energy development at this juncture appears to be affected to a greater degree by institutional constraints than by water availability constraints.

Narayanan, R.; MacIntyre, D.D.; Torpy, M.F.

1980-08-01T23:59:59.000Z

420

Savannah River | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector GeneralDepartment of Energy fromCommentsRevolving STATEMENTSavannah River Site Savannah RiverSite

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

E-Print Network 3.0 - au powder surfaces Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Mathematics 86 UNCORRECTEDPROOF MSA 21109 19 Summary: size distribution analyzer3 at Praxair 152 Surface Technologies Inc. Both of the powder types had... -xxx Effect of initial...

422

Multi-scale analysis and simulation of powder blending in pharmaceutical manufacturing  

E-Print Network [OSTI]

A Multi-Scale Analysis methodology was developed and carried out for gaining fundamental understanding of the pharmaceutical powder blending process. Through experiment, analysis and computer simulations, microscopic ...

Ngai, Samuel S. H

2005-01-01T23:59:59.000Z

423

High-performance Ni[sub 3]Al synthesized from composite powders  

SciTech Connect (OSTI)

Specimens of Ni[sub 3]Al + B of high density (>99.3 pct RD) and relatively large dimension have been synthesized from composite powders through processes of replacing plating and electroless Ni-B plating on Al powder, sintering, and thermal-mechanical treatment. The uniformly coated Ni layer over fine Al or Ni core particles constituting these coating/core composite powders has advantages such as better resistance to oxidation relative to pure Al powder, a greater green density as a compacted powder than prealloyed powder, the possibility of atomically added B to the material by careful choice of a suitable plating solution, and avoidance of the expensive powder metallurgy (PM) equipment such as a hot isostatic press (HIP), hot press (HP), etc. The final Ni[sub 3]Al + B product is made from Ni-B-Al and Ni-B-Ni mixed composite powders by means of traditional PM processes such as compacting, sintering, rolling, and annealing, and therefore, the dimensions of the product are not constrained by the capacity of an HIP or HP. The properties of Ni[sub 3]Al composite powder metallurgy (CPM) specimens tested at room temperature have been obtained, and comparison with previous reports is conducted. A tensile elongation of about 16 pct at room temperature was attained.

Chiou, W.C.; Hu, C.T. (National Tsing Hua Univ., Hsinchu (Taiwan, Province of China). Dept. of Materials Science and Engineering)

1994-05-01T23:59:59.000Z

424

Investigation of a novel passivation technique for gas atomized magnesium powders.  

E-Print Network [OSTI]

??Gas atomized magnesium powders are critical for the production of a wide variety of flares, tracer projectiles, and other munitions for the United States military,… (more)

Steinmetz, Andrew Douglas

2011-01-01T23:59:59.000Z

425

Energy efficiency opportunities within the powder coating industry - Energy audit and pinch analysis.  

E-Print Network [OSTI]

??The powder coating industries in Sweden use about 525 GWh of energy every year. The need to reduce the energy use is increasing due to… (more)

Bergek, Charlotte

2011-01-01T23:59:59.000Z

426

E-Print Network 3.0 - amorphous aluminum powder Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

slag... by limestone powder and BFS can lower the cost and enhance the greenness of concrete, since the production Source: Li, Victor C. - Departments of Civil and Environmental...

427

EA-1692: Red River Environmental Products, LLC Activated Carbon...  

Broader source: Energy.gov (indexed) [DOE]

2: Red River Environmental Products, LLC Activated Carbon Manufacturing Facility, Red River Parish, LA EA-1692: Red River Environmental Products, LLC Activated Carbon Manufacturing...

428

Enforcement Documents - Savannah River Site | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

the Savannah River Site (EA-2000-08) June 7, 2000 Enforcement Letter, Savannah River Ecology Laboratory - June 7, 2000 Issued to Savannah River Ecology Laboratory related to...

429

Raft River Rural Electric Coop. Vigilante Electric Coop. Northern  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Farmers Electric Riverside Electric Minidoka Soda Springs Idaho Falls Lower Valley Energy Lost River Electric Coop. Fall River Rural Electric Coop. Salmon River Electric...

430

Deep drilling data, Raft River geothermal area, Idaho-Raft River...  

Open Energy Info (EERE)

Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Deep drilling data, Raft River geothermal area, Idaho-Raft River geothermal exploration well...

431

Identifying Software Usage at HPC Centers with the Automatic Library Tracking Database  

SciTech Connect (OSTI)

A library tracking database has been developed to monitor software/library usage. This Automatic Library Tracking Database (ALTD) automatically and transparently stores, into a database, information about the libraries linked into an application at compilation time and also the executables launched in a batch job. Information gathered into the database can then be mined to provide reports. Analyzing the results from the data collected will help to identify, for example, the most frequently used and the least used libraries and codes, and those users that are using deprecated libraries or applications. We will illustrate the usage of libraries and executables on the Cray XT platforms hosted at the National Institute for Computational Sciences and the Oak Ridge Leadership Computing Facility (both located at Oak Ridge National Laboratory).

Hadri, Bilel [ORNL; Fahey, Mark R [ORNL; Jones, Nicholas A [ORNL

2010-01-01T23:59:59.000Z

432

High Pressure Neutron Powder Diffraction Study of Superhydrated Natrolite  

SciTech Connect (OSTI)

Neutron powder diffraction data were collected on a sample of natrolite and a 1:1 (v/v) mixture of perdeuterated methanol and water at a pressure of 1.87(11) GPa. The natrolite sample was superhydrated, with a water content double that observed at ambient pressure. All of the water deuterium atoms were located and the nature and extent of the hydrogen bonding elucidated for the first time. This has allowed the calculation of bond valence sums for the water oxygen atoms, and from this, it can be deduced that the key energetic factor leading to loss of the additional water molecule upon pressure release is the poor coordination to sodium cations within the pores.

Colligan,M.; Lee, Y.; Vogt, T.; Celestian, A.; Parise, J.; Marshall, W.; Hriljac, J.

2005-01-01T23:59:59.000Z

433

The iron powder test for naphthenic acid corrosion studies  

SciTech Connect (OSTI)

In the course of an ongoing investigation into the phenomenon of naphthenic acid corrosion, a new test method has evolved and is currently being further developed to substitute the total acid number (TAN or neutralization number) as an indicator for naphthenic acid corrosion potential. It can also be used to complement conventional autoclave corrosion tests in high temperature environments, which are based on weight loss of steel coupons. In this new method an oil sample reacts with pure iron powder within an autoclave heated to the testing temperature. The result is based on the amount of dissolved iron found in the oil sample. The oil sample can dissolve an amount of iron for a given time at a given temperature, depending on the naphthenic acid corrosion, since these acids react with iron to produce oil soluble iron naphthenates. This paper describes the method, compares it with conventional crude corrosiveness testing, and proposes it as a new way of measuring naphthenic acid corrosion potential.

Hau, J.L.; Yepez, O.; Specht, M.I.; Lorenzo, R. [PDVSA-Intevep, Caracas (Venezuela)

1999-11-01T23:59:59.000Z

434

G.: Personalizing web directories with the aid of web usage data  

E-Print Network [OSTI]

Abstract—This paper presents a knowledge discovery framework for the construction of Community Web Directories, a concept that we introduced in our recent work, applying personalization to Web directories. In this context, the Web directory is viewed as a thematic hierarchy and personalization is realized by constructing user community models on the basis of usage data. In contrast to most of the work on Web usage mining, the usage data that are analyzed here correspond to user navigation throughout the Web, rather than a particular Web site, exhibiting as a result a high degree of thematic diversity. For modeling the user communities, we introduce a novel methodology that combines the users ’ browsing behavior with thematic information from the Web directories. Following this methodology, we enhance the clustering and probabilistic approaches presented in previous work and also present a new algorithm that combines these two approaches. The resulting community models take the form of Community Web Directories. The proposed personalization methodology is evaluated both on a specialized artificial and a general-purpose Web directory, indicating its potential value to the Web user. The experiments also assess the effectiveness of the different machine learning techniques on the task.

Dimitrios Pierrakos; Georgios Paliouras

2010-01-01T23:59:59.000Z

435

Shutdown mechanisms for a hypothetical criticality accident involving HEU powder: Preliminary results  

SciTech Connect (OSTI)

This work examines the physical processes that would cause an accidental criticality involving higly enriched uranium(HEU) powder to shut down naturally. The study analyses an excursion resulting from the continous poring of slightly damp HEU powder (either UO{sub 3} or UF{sub 4} containing 1.5% water) onto a concrete floor.

Bentley, C.; Basoglu, B.; Dunn, M.; Plaster, M.; Ruggles, A.; Wilkinson, A.; Yamamoto, T.; Dodds, H. [Univ. of Tennessee, Knoxville, TN (United States)

1994-12-31T23:59:59.000Z

436

Characterization of prealloyed copper powders treated in high energy ball mill  

SciTech Connect (OSTI)

The inert gas atomised prealloyed copper powders containing 3.5 wt.% Al were milled up to 20 h in the planetary ball mill in order to oxidize aluminium in situ with oxygen from the air. In the next procedure compacts from milled powder were synthesized by hot-pressing in argon atmosphere. Compacts from as-received Cu-3.5 wt.% Al powder and electrolytic copper powder were also prepared under the same conditions. Microstructural and morphological changes of high energy milled powder as well as changes of thermal stability and electrical conductivity of compacts were studied as a function of milling time and high temperature exposure at 800 deg. C. Optical, scanning electron microscopy (SEM) and X-ray diffraction analysis were performed for microstructural characterization, whereas thermal stability and electrical conductivity were evaluated by microhardness measurements and conductometer Sigmatest, respectively. The prealloyed 5 h-milled and compacted powder showed a significant increase in microhardness reaching the value of 2600 MPa, about 4 times greater than that of compacts synthesized from as-received electrolytic copper powder (670 MPa). The electrical conductivity of compacts from 5 h-milled powder was 52% IACS. The results were discussed in terms of the effect of small grain size and finely distributed alumina dispersoids on hardening and thermal stability of compacts.

Rajkovic, Viseslava [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)]. E-mail: visnja@vin.bg.ac.yu; Bozic, Dusan [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro); Jovanovic, Milan T. [Institute of Nuclear Sciences 'Vinca', P.O. Box 522, 11001 Belgrade (Serbia and Montenegro)

2006-08-15T23:59:59.000Z

437

Preparation of lead-zirconium-titanium film and powder by electrodeposition  

DOE Patents [OSTI]

A process is disclosed for the preparation of lead-zirconium-titanium (PZT) film and powder compositions. The process comprises the steps of providing an electrodeposition bath, providing soluble salts of lead, zirconium and titanium metals to this bath, electrically energizing the bath to thereby direct ions of each respective metal to a substrate electrode and cause formation of metallic particles as a recoverable film of PZT powder on the electrode, and also recovering the resultant film as a powder. Recovery of the PZT powder can be accomplished by continually energizing the bath to thereby cause powder initially deposited on the substrate-electrode to drop therefrom into the bath from which it is subsequently removed. A second recovery alternative comprises energizing the bath for a period of time sufficient to cause PZT powder deposition on the substrate-electrode only, from which it is subsequently recovered. PZT film and powder so produced can be employed directly in electronic applications, or the film and powder can be subsequently oxidized as by an annealing process to thereby produce lead-zirconium-titanium oxide for use in electronic applications. 4 figs.

Bhattacharya, R.N.; Ginley, D.S.

1995-10-31T23:59:59.000Z

438

Sinterable ceramic powders from laser heated gas phase reactions and rapidly solidified ceramic materials : annual report.  

E-Print Network [OSTI]

CO[subscript 2] lasers have been employed to heat reactant gases to synthesize Si, Si[subscript 3] N[subscript 4] and SiC powders. The powders are small, uniform in size, nonagglomerated, highly pure and of controlled ...

Haggerty, John Scarseth

1984-01-01T23:59:59.000Z

439

Cold compaction study of Armstrong Process Ti-6Al-4V powders  

SciTech Connect (OSTI)

This work investigates the cold compaction behavior of Ti-6Al-4V powders produced by Armstrong Process . As-received as well as milled powders were characterized and these powders were uniaxially die-pressed at designated pressures up to 690 MPa to form disk samples with different aspect ratios. Samples with high aspect ratio exhibited non-uniform density along the pressing axis and the density distribution is in consistent with the result predicted by finite element analysis. The linear regression analysis on the experimental density data can be used to predict density of compacts with different aspect ratios. In the studied pressure range, an empirical powder compaction equation represents the green density pressure relationship very well for both the as-received and 1-hr milled Armstrong Ti-6Al-4V powders.

Chen, Wei [ORNL; Yamamoto, Yukinori [ORNL; Peter, William H [ORNL; Gorti, Sarma B [ORNL; Sabau, Adrian S [ORNL; Clark, Michael B [ORNL; Nunn, Stephen D [ORNL; Kiggans, Jim [ORNL; Blue, Craig A [ORNL; Fuller, Brian [International Titanium Powder; Akhtar, Kamal [International Titanium Powder

2011-01-01T23:59:59.000Z

440

Causal Factors of Weld Porosity in Gas Tungsten Arc Welding of Powder Metallurgy Produced Titanium Alloys  

SciTech Connect (OSTI)

ORNL undertook an investigation using gas tungsten arc (GTA) welding on consolidated powder metallurgy (PM) titanium (Ti) plate, to identify the causal factors behind observed porosity in fusion welding. Tramp element compounds of sodium and magnesium, residual from the metallothermic reduction of titanium chloride used to produce the titanium, were remnant in the starting powder and were identified as gas forming species. PM-titanium made from revert scrap where sodium and magnesium were absent, showed fusion weld porosity, although to a lesser degree. We show that porosity was attributable to hydrogen from adsorbed water on the surface of the powders prior to consolidation. The removal / minimization of both adsorbed water on the surface of titanium powder and the residues from the reduction process prior to consolidation of titanium powders, are critical to achieve equivalent fusion welding success similar to that seen in wrought titanium produced via the Kroll process.

Muth, Thomas R [ORNL; Yamamoto, Yukinori [ORNL; Frederick, David Alan [ORNL; Contescu, Cristian I [ORNL; Chen, Wei [ORNL; Lim, Yong Chae [ORNL; Peter, William H [ORNL; Feng, Zhili [ORNL

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Enterprise Assessments Review, Savannah River Site 2014 Site...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

More Documents & Publications Independent Oversight Inspection, Savannah River Site - January 2010 Independent Oversight Review, Savannah River Site Tritium Facilities - December...

442

Snake River Geothermal Project - Innovative Approaches to Geothermal...  

Broader source: Energy.gov (indexed) [DOE]

Snake River Geothermal Project - Innovative Approaches to Geothermal Exploration Snake River Geothermal Project - Innovative Approaches to Geothermal Exploration DOE Geothermal...

443

Recovery of yttrium from cathode ray tubes and lamps’ fluorescent powders: experimental results and economic simulation  

SciTech Connect (OSTI)

Highlights: • Fluorescent powder of lamps. • Fluorescent powder of cathode ray rubes. • Recovery of yttrium from fluorescent powders. • Economic simulation for the processes to recover yttrium from WEEE. - Abstract: In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides. Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%. Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes.

Innocenzi, V., E-mail: valentina.innocenzi1@univaq.it; De Michelis, I.; Ferella, F.; Vegliň, F.

2013-11-15T23:59:59.000Z

444

Continuous Process for Low-Cost, High-Quality YSZ Powder  

SciTech Connect (OSTI)

This report describes results obtained by NexTech Materials, Ltd. in a project funded by DOE under the auspices of the Solid-State Energy Conversion Alliance (SECA). The project focused on development of YSZ electrolyte powder synthesis technology that could be ''tailored'' to the process-specific needs of different solid oxide fuel cell (SOFC) designs being developed by SECA's industry teams. The work in the project involved bench-scale processing work aimed at establishing a homogeneous precipitation process for producing YSZ electrolyte powder, scaleup of the process to 20-kilogram batch sizes, and evaluation of the YSZ powder products produced by the process. The developed process involved the steps of: (a) preparation of an aqueous hydrous oxide slurry via coprecipitation; (b) washing of residual salts from the precipitated hydroxide slurry followed by drying; (c) calcination of the dried powder to crystallize the YSZ powder and achieve desired surface area; and (d) milling of the calcined powder to targeted particle size. YSZ powders thus prepared were subjected to a comprehensive set of characterization and performance tests, including particle size distribution and surface area analyses, sintering performance studies, and ionic conductivity measurements. A number of different YSZ powder formulations were established, all of which had desirable performance attributes relative to commercially available YSZ powders. Powder characterization and performance metrics that were established at the onset of the project were met or exceeded. A manufacturing cost analysis was performed, and a manufactured cost of $27/kg was estimated based on this analysis. The analysis also allowed an identification of process refinements that would lead to even lower cost.

Scott L. Swartz; Michael Beachy; Matthew M. Seabaugh

2006-03-31T23:59:59.000Z

445

Grays River Watershed Geomorphic Analysis  

SciTech Connect (OSTI)

This investigation, completed for the Pacific Northwest National Laboratory (PNNL), is part of the Grays River Watershed and Biological Assessment commissioned by Bonneville Power Administration under project number 2003-013-00 to assess impacts on salmon habitat in the upper Grays River watershed and present recommendations for habitat improvement. This report presents the findings of the geomorphic assessment and is intended to support the overall PNNL project by evaluating the following: 􀂃 The effects of historical and current land use practices on erosion and sedimentation within the channel network 􀂃 The ways in which these effects have influenced the sediment budget of the upper watershed 􀂃 The resulting responses in the main stem Grays River upstream of State Highway 4 􀂃 The past and future implications for salmon habi

Geist, David R.

2005-04-30T23:59:59.000Z

446

River System Hydrology in Texas  

E-Print Network [OSTI]

,700 86,700 Proctor Leon River USACE 1963 59,400 54,702 310,100 Belton Leon River USACE 1954 457,600 432,978 640,000 Stillhouse Hollow Lampasas River USACE 1968 235,700 224,279 390,660 Georgetown San Gabriel R USACE 1980 37,100 36,980 87,600 Granger... San Gabriel R USACE 1980 65,500 50,540 162,200 Somerville Yequa Creek USACE 1967 160,110 154,254 337,700 Hubbard Creek Hubbard Creek WCTMWD 1962 317,750 317,750 í Post NF Double Mt WRMWD proposed 57,420 í í Alan Henry SF Double Mt Lubbock 1993 115...

Wurbs, R.; Zhang, Y.

2014-01-01T23:59:59.000Z

447

An Inside Look at River Corridor  

Broader source: Energy.gov [DOE]

In the seventh chapter of The Handford Story, the Energy Department takes a look at the River Corridor -- a 50-mile stretch of the Columbia River that flows through the Hanford site in southeast...

448

Preliminary Notice of Violation, Westinghouse Savannah River...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

19, 2002 Issued to Westinghouse Savannah River Company related to Safety Basis and Radiation Protection Violations at the Savannah River Site, On March 19, 2002, the U.S....

449

Lakes and Rivers Improvement Act (Ontario, Canada)  

Broader source: Energy.gov [DOE]

The Lakes and Rivers Improvement Act proscribes the management, protection, preservation and use of the waters of the lakes and rivers of Ontario and the land under them. The Act also details...

450

Youghiogheny Wild and Scenic River (Maryland)  

Broader source: Energy.gov [DOE]

Portions of the Youghiogheny River are protected under the Scenic and Wild Rivers Act, and development on or near these areas is restricted. COMAR section 08.15.02 addresses permitted uses and...

451

Belle Fourche River Compact (South Dakota)  

Broader source: Energy.gov [DOE]

The Belle Fourche River Compact, agreed to by South Dakota and Wyoming, seeks to provide for the most efficient use of the waters of the Belle Fourche River Basin for multiple purposes, and to...

452

Preliminary Notice of Violation, Westinghouse Savannah River...  

Broader source: Energy.gov (indexed) [DOE]

December 5, 1997 Issued to Westinghouse Savannah River Company, related to an Unplanned Radioactive Material Intake at the Savannah River Site, (EA-97-12) On December 5, 1997, the...

453

SME-Entrepreneurship Global Conference 2006 -Refereed Paper Bakke et al.: ICT diffusion and usage among Asian SMEs 1  

E-Print Network [OSTI]

SME-Entrepreneurship Global Conference 2006 - Refereed Paper Bakke et al.: ICT diffusion and usage factors, infrastructures and post-adoption behaviour Paper for the conference: "SME ­ Entrepreneurship. Keywords: Diffusion models, infrastructure, domestication, small and medium sized enterprises, SME, ICT

Sahay, Sundeep

454

Examining the adoption, usage and outcomes of mobile money services: the case of M-PESA in Kenya   

E-Print Network [OSTI]

This thesis will examine the adoption, usage and outcomes of a mobile money service called MPESA. Since being launched in 2007, the service has seen phenomenal growth in Kenya. Over 7.5 million users, or 34% of the adult ...

Morawczynski, Olga

2011-07-04T23:59:59.000Z

455

Columbia River Component Data Evaluation Summary Report  

SciTech Connect (OSTI)

The purpose of the Columbia River Component Data Compilation and Evaluation task was to compile, review, and evaluate existing information for constituents that may have been released to the Columbia River due to Hanford Site operations. Through this effort an extensive compilation of information pertaining to Hanford Site-related contaminants released to the Columbia River has been completed for almost 965 km of the river.

C.S. Cearlock

2006-08-02T23:59:59.000Z

456

Bayer Material Science (TRL 1 2 3 System)- River Devices to Recover Energy with Advanced Materials(River DREAM)  

Broader source: Energy.gov [DOE]

Bayer Material Science (TRL 1 2 3 System) - River Devices to Recover Energy with Advanced Materials(River DREAM)

457

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

DOE Patents [OSTI]

A process for the preparation of amorphous precursor powders for Pb-doped Bi.sub.2 Sr.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains.

Balachandran, Uthamalingam (Hinsdale, IL)

1996-01-01T23:59:59.000Z

458

Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route  

E-Print Network [OSTI]

Novel synthesis of high phase-purity Mg2SnO4 from metallic precursors via powder metallurgy route of composition Mg2Sn was prepared by the conventional powder metallurgy route. This up on heating in air under

Azad, Abdul-Majeed

459

Rapid formation of phase-clean 110 K (Bi-2223) powders derived via freeze-drying process  

DOE Patents [OSTI]

A process for the preparation of amorphous precursor powders for Pb-doped Bi{sub 2}Sr{sub 2} Ca{sub 2}Cu{sub 3}O{sub x} (2223) includes a freeze-drying process incorporating a splat-freezing step. The process generally includes splat freezing a nitrate solution of Bi, Pb, Sr, Ca, and Cu to form flakes of the solution without any phase separation; grinding the frozen flakes to form a powder; freeze-drying the frozen powder; heating the dried powder to form a dry green precursor powders; denitrating the green-powders; heating the denitrated powders to form phase-clean Bi-2223 powders. The grain boundaries of the 2223 grains appear to be clean, leading to good intergrain contact between 2223 grains. 11 figs.

Balachandran, U.

1996-06-04T23:59:59.000Z

460

Application and modeling of near-infrared frequency domain photon migration for monitoring pharmaceutical powder blending operations  

E-Print Network [OSTI]

of blending. A simulation method was developed which consisted of (i) dynamic simulation for generating the powder structure; (ii) the completely-randommixture model for predicting the spatial distribution of API particles within the powder bed; and (iii...

Pan, Tianshu

2006-10-30T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

SRO -NERP-1 THE SAVANNAH RIVER PLANT  

E-Print Network [OSTI]

AND TREATMENT by Whit Gibbons Savannah River Ecology Laboratory Aiken , South Carolina A PUBLICATION OF EROA 'S SAVANNAH RIVER NATIONAL ENVIRONMENTAL RESEARCH PARK -SEPTEMBER 1977 COPIES MAY BE OBTAINEO FROM SAVANNAHSRO -NERP-1 SNAKES OF THE SAVANNAH RIVER PLANT WITH INFORMATION ABOUT SNAKEBITE PREVENTION

Georgia, University of

462

Atlas of the Columbia River Basin  

E-Print Network [OSTI]

#12;Atlas of the Columbia River Basin Oregon State University Computer-Assisted Cartography Course & GEOVISUALIZATION GROUP UNIVERSITY #12;2013 Oregon State University Atlas of the Columbia River Basin FOREWORDAtlas, Montana, Nevada, Wyoming, and Utah. 2013 Oregon State University Atlas of the Columbia River Basin

Jenny, Bernhard

463

Wet processing of palladium for use in the tritium facility at Westinghouse, Savannah River, SC. Preparation of palladium using the Mound Muddy Water process  

SciTech Connect (OSTI)

Palladium used at Savannah River for tritium storage is currently obtained from a commercial source. In order to better understand the processes involved in preparing this material, Savannah River is supporting investigations into the chemical reactions used to synthesize this material and into the conditions necessary to produce palladium powder that meets their specifications. This better understanding may help to guarantee a continued reliable source for this material in the future. As part of this evaluation, a work-for-others contract between Westinghouse Savannah River Company and the Ames Laboratory Metallurgy and Ceramics Program was initiated. During FY98, the process for producing palladium powder developed in 1986 by Dan Grove of Mound Applied Technologies (USDOE) was studied to understand the processing conditions that lead to changes in morphology in the final product. This report details the results of this study of the Mound Muddy Water process, along with the results of a round-robin analysis of well-characterized palladium samples that was performed by Savannah River and Ames Laboratory. The Mound Muddy Water process is comprised of three basic wet chemical processes, palladium dissolution, neutralization, and precipitation, with a number of filtration steps to remove unwanted impurity precipitates.

Baldwin, D.P.; Zamzow, D.S.

1998-11-10T23:59:59.000Z

464

Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method  

E-Print Network [OSTI]

Standard test method for carbon (total) in uranium oxide powders and pellets by direct combustion-infrared detection method

American Society for Testing and Materials. Philadelphia

2009-01-01T23:59:59.000Z

465

EXPERIMENTS WITH POWDERED CMN THERMOMETERS BETWEEN 10 mK AND 4K, AND A COMPARISON WITH AN NBS SRM 768 FIXED POINT DEVICE  

E-Print Network [OSTI]

EXPERIMENTS WITH POWDERED CMN THERMOMETERS BETWEEN 10 mK ANDof a powdered CHN thermometer with an NBS fixed point devicesuperficially similar CMN thermometers is also presented. c

Fogle, W.E.

2010-01-01T23:59:59.000Z

466

HANFORD SITE RIVER CORRIDOR CLEANUP  

SciTech Connect (OSTI)

In 2005, the US Department of Energy (DOE) launched the third generation of closure contracts, including the River Corridor Closure (RCC) Contract at Hanford. Over the past decade, significant progress has been made on cleaning up the river shore that bordes Hanford. However, the most important cleanup challenges lie ahead. In March 2005, DOE awarded the Hanford River Corridor Closure Contract to Washington Closure Hanford (WCH), a limited liability company owned by Washington Group International, Bechtel National and CH2M HILL. It is a single-purpose company whose goal is to safely and efficiently accelerate cleanup in the 544 km{sup 2} Hanford river corridor and reduce or eliminate future obligations to DOE for maintaining long-term stewardship over the site. The RCC Contract is a cost-plus-incentive-fee closure contract, which incentivizes the contractor to reduce cost and accelerate the schedule. At $1.9 billion and seven years, WCH has accelerated cleaning up Hanford's river corridor significantly compared to the $3.2 billion and 10 years originally estimated by the US Army Corps of Engineers. Predictable funding is one of the key features of the new contract, with funding set by contract at $183 million in fiscal year (FY) 2006 and peaking at $387 million in FY2012. Another feature of the contract allows for Washington Closure to perform up to 40% of the value of the contract and subcontract the balance. One of the major challenges in the next few years will be to identify and qualify sufficient subcontractors to meet the goal.

BAZZELL, K.D.

2006-02-01T23:59:59.000Z

467

Usage of Electric Vehicle Supply Equipment Along the Corridors between the EV Project Major Cities  

SciTech Connect (OSTI)

The report explains how the EVSE are being used along the corridors between the EV Project cities. The EV Project consists of a nationwide collaboration between Idaho National Laboratory (INL), ECOtality North America, Nissan, General Motors, and more than 40 other city, regional and state governments, and electric utilities. The purpose of the EV Project is to demonstrate the deployment and use of approximately 14,000 Level II (208-240V) electric vehicle supply equipment (EVSE) and 300 fast chargers in 16 major cities. This research investigates the usage of all currently installed EV Project commercial EVSE along major interstate corridors. ESRI ArcMap software products are utilized to create geographic EVSE data layers for analysis and visualization of commercial EVSE usage. This research locates the crucial interstate corridors lacking sufficient commercial EVSE and targets locations for future commercial EVSE placement. The results and methods introduced in this research will be used by INL for the duration of the EV Project.

Mindy Kirkpatrick

2012-05-01T23:59:59.000Z

468

Optimal Power Procurement and Demand Response with Quality-of-Usage Guarantees  

E-Print Network [OSTI]

In this paper, we propose a general operating scheme which allows the utility company to jointly perform power procurement and demand response so as to maximize the social welfare. Our model takes into consideration the effect of the renewable energy and the multi-stage feature of the power procurement process. It also enables the utility company to provide quality-of-usage (QoU) guarantee to the power consumers, which ensures that the average power usage level meets the target value for each user. To maximize the social welfare, we develop a low-complexity algorithm called the \\emph{welfare maximization algorithm} (WMA), which performs joint power procurement and dynamic pricing. WMA is constructed based on a two-timescale Lyapunov optimization technique. We prove that WMA achieves a close-to-optimal utility and ensures that the QoU requirement is met with bounded deficit. WMA can be implemented in a distributed manner and is robust with respect to system dynamics uncertainty.

Huang, Longbo; Ramchandran, Kannan

2011-01-01T23:59:59.000Z

469

Effects of TiCl4 Purity on the Sinterability of Armstrong-Processed Ti Powder  

SciTech Connect (OSTI)

A series of high purity and low purity powders were synthesized from TiCl4 by the Armstrong process. While both powders displayed swelling when consolidated and sintered, the lower purity powder exhibited this phenomenon in significantly lower degree. The improvement is attributed to the increase in the onset of sintering temperature, which mitigates the entrapment of volatile impurities that would otherwise lead to pore formation and growth. The net effect is that the use of a lower purity TiCl4 may beneficial in two ways: (1) it is a potentially lower cost precursor to Ti powder production and (2) the trace impurities allow higher density components to be fabricated via a typical low-cost press and sinter approach.

Weil, K. Scott; Hovanski, Yuri; Lavender, Curt A.

2009-04-03T23:59:59.000Z

470

Combustion of Bulk 84% Fe/16% KCIO{sub 4} heat powder  

SciTech Connect (OSTI)

Fe/KClO{sub 4} pyrotechnic mixtures are used in thermal batteries to provide the heat necessary to bring the battery stack to operating temperatures of 550 to 600 C. This heat source is normally used as discs pressed from bulk powder. To evaluate the consequences associated with unexpected ignition of large amounts of heat powder, combustion of 84% Fe/16% KClO{sub 4} heat powders was conducted for various scenarios under controlled conditions and the response documented. Increasing amounts of heat powder--up to 8 lbs--were ignited in both unconfined and confined (sealed) containers in a remote area. The containers were thermocoupled and the resulting burning filmed with a standard video camera, high-speed (1,000 frames/s) film and video cameras, and an infrared video camera. A 20- minute video of the burning under the various conditions is presented.

Nissen, M.; Guidotti, R.A.; Berry, B.

1996-05-01T23:59:59.000Z

471

Electricity from wood powder report on a TPV generator in progress  

SciTech Connect (OSTI)

A joint project between NREL, SLU, and UCFB aims at building a wood powder fueled TPV generator. The progress of the project is presented. {copyright} {ital 1996 American Institute of Physics.}

Broman, L.; Jarefors, K. [Solar Energy Research Center (SERC), University College of Falun Borlange (UCFB), Box 10044, S-781 10 Borlange (Sweden); Marks, J. [Department of Operational Efficiency, Swedish University of Agricultural Sciences (SLU), Herrgardsv 122, S-776 98 Garpenberg (Sweden); Wanlass, M. [National Renewable Energy Laboratory (NREL), 1617 Cole Blvd., Golden, Colorado 80401-3393, United States of America

1996-02-01T23:59:59.000Z

472

E-Print Network 3.0 - aluminum powder alloy Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: aluminum powder alloy Page: << < 1 2 3 4 5 > >> 1 JOURNALDEPHYSIQUE1V ColloqueC7,supplement au...

473

E-Print Network 3.0 - aluminum alloy powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: aluminum alloy powder Page: << < 1 2 3 4 5 > >> 1 JOURNALDEPHYSIQUE1V ColloqueC7,supplement au...

474

E-Print Network 3.0 - aluminum nitride powder Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the original powder. An FTIR study was done using the KBr technique and a high... , a reduction in the content of adsorbed water was observed, compared to the original ... Source:...

475

E-Print Network 3.0 - al-mo powder processing Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the critical transition temperature and the critical current density of the processed powder by magnetic... h and Jc of the order of 106 A cm-2 at 4 K. The superconducting...

476

Transient liquid-phase infiltration of a powder-metal skeleton  

E-Print Network [OSTI]

Transient Liquid-Phase Infiltration (TLI) is a new method for densifying a powder-metal skeleton that produces a final part of homogeneous composition without significant dimensional change, unlike traditional infiltration ...

Lorenz, Adam Michael, 1974-

2002-01-01T23:59:59.000Z

477

alloyed fe-mo powder: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

478

alloyed al-ti powders: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

- TxSpace Summary: The research in this thesis covers the design and implementation of a depleted uranium (DU) powder production system and the initial results of a DU-Zr-Mg alloy...

479

Two methods for characterizing the compaction and ejection behavior of metal powders in a die  

E-Print Network [OSTI]

TWO METHODS FOR CHARACTERIZING THE COMPACTION AND EJECTION BEHAVIOR OF METAL POWDERS IN A DIE A Thesis by RICHARD JAMES SAJDAK Submitted to the Graduate College of Texas A&M University in partial fulfillment of the requirement for the degree... of Committee) (Head of Departme t) &ci- (51embor) (Flember) May 1969 ABSTRACT Two Methods for Characterizing the Compaction and Ejection Behavior of Metal Powders In a Die. (May 1969) Richard James Sajdak, B. S. , University of Wyoming M. S. , Texas A...

Sajdak, Richard James

1969-01-01T23:59:59.000Z

480

Chemical vapor deposited diamond-on-diamond powder composites (LDRD final report)  

SciTech Connect (OSTI)

Densifying non-mined diamond powder precursors with diamond produced by chemical vapor infiltration (CVI) is an attractive approach for forming thick diamond deposits that avoids many potential manufacturability problems associated with predominantly chemical vapor deposition (CVD) processes. The authors developed techniques for forming diamond powder precursors and densified these precursors in a hot filament-assisted reactor and a microwave plasma-assisted reactor. Densification conditions were varied following a fractional factorial statistical design. A number of conclusions can be drawn as a result of this study. High density diamond powder green bodies that contain a mixture of particle sizes solidify more readily than more porous diamond powder green bodies with narrow distributions of particle sizes. No composite was completely densified although all of the deposits were densified to some degree. The hot filament-assisted reactor deposited more material below the exterior surface, in the interior of the powder deposits; in contrast, the microwave-assisted reactor tended to deposit a CVD diamond skin over the top of the powder precursors which inhibited vapor phase diamond growth in the interior of the powder deposits. There were subtle variations in diamond quality as a function of the CVI process parameters. Diamond and glassy carbon tended to form at the exterior surface of the composites directly exposed to either the hot filament or the microwave plasma. However, in the interior, e.g. the powder/substrate interface, diamond plus diamond-like-carbon formed. All of the diamond composites produced were grey and relatively opaque because they contained flawed diamond, diamond-like-carbon and glassy carbon. A large amount of flawed and non-diamond material could be removed by post-CVI oxygen heat treatments. Heat treatments in oxygen changed the color of the composites to white.

Panitz, J.K.; Hsu, W.L.; Tallant, D.R.; McMaster, M.; Fox, C.; Staley, D.

1995-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "usage powder river" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Assessment of the potential of colloidal fuels in future energy usage. Final report. [97 references  

SciTech Connect (OSTI)

Pulverized coal has been an increasing important source of energy over the past century. Most large utility boilers, all modern coking plants, and many industrial boilers and blast furnaces employ pulverized coal as a major feed stream. In periods of oil shortages, such as during World Wars I and II, the concept of adding powdered coal to oil for use in combustion equipment originally designed for oil has been actively pursued but rarely used. Over this same period of time, there have been attempts to use air suspensions of coal dust in diesel engines in Germany, and in turbines in various countries. The economic advantages to be enjoyed by substitution of powdered coal in oil are not generally realized. Oil costs at $30/bbl represent a fuel value of about $5.00/10/sup 6/ Btu; coal at $25/ton is equivalent to approximately $1.00/10/sup 6/ Btu. Although capital costs for the use of coal are higher than those associated with the use of oil, coal is clearly becoming the least costly fuel. Not only are considerable cost advantages possible, but an improvement in balance of payments and an increase in reliability of fuel supplies are other potential benefits. It is therefore recommended that increased national attention be given to develop these finer grinds of carbonaceous fuels to be used in various suspending fluids. Technical areas where significant additional support appear desirable are described.

Not Available

1980-02-25T23:59:59.000Z

482

Combustion characteristics of dry coal-powder-fueled adiabatic diesel engine: Final report  

SciTech Connect (OSTI)

This report describes the progress and findings of a research program aimed at investigating the combustion characteristics of dry coal powder fueled diesel engine. During this program, significant achievements were made in overcoming many problems facing the coal-powder-fueled engine. The Thermal Ignition Combustion System (TICS) concept was used to enhance the combustion of coal powder fuel. The major coal-fueled engine test results and accomplishments are as follows: design, fabrication and engine testing of improved coal feed system for fumigation of coal powder to the intake air; design, fabrication and engine testing of the TICS chamber made from a superalloy material (Hastelloy X); design, fabrication and engine testing of wear resistant chrome oxide ceramic coated piston rings and cylinder liner; lubrication system was improved to separate coal particles from the contaminated lubricating oil; control of the ignition timing of fumigated coal powder by utilizing exhaust gas recirculation (EGR) and variable TICS chamber temperature; coal-fueled engine testing was conducted in two configurations: dual fuel (with diesel pilot) and 100% coal-fueled engine without diesel pilot or heated intake air; cold starting of the 100% coal-powder-fueled engine with a glow plug; and coal-fueled-engine was operated from 800 to 1800 rpm speed and idle to full load engine conditions.

Kakwani, R.M.; Kamo, R.

1989-01-01T23:59:59.000Z

483

The Columbia River System : the Inside Story.  

SciTech Connect (OSTI)

The Columbia Ricer is one of the greatest natural resources in the western United States. The river and its tributaries touch the lives of nearly every resident of the Northwest-from providing the world-famous Pacific salmon to supplying the clean natural fuel for over 75 percent of the region's electrical generation. Since early in the century, public and private agencies have labored to capture the benefits of this dynamic river. Today, dozens of major water resource projects throughout the region are fed by the waters of the Columbia Basin river system. And through cooperative efforts, the floods that periodically threaten developments near the river can be controlled. This publication presents a detailed explanation of the planning and operation of the multiple-use dams and reservoirs of the Columbia River system. It describes the river system, those who operate and use it, the agreements and policies that guide system operation, and annual planning for multiple-use operation.

United States. Bonneville Power Administration.

1991-09-01T23:59:59.000Z

484

The River Runs Dry: Examining Water Shortages in the Yellow River Basin  

E-Print Network [OSTI]

Runs Dry: Examining Water Shortages in the Yellow Riverof the severity of water shortages in the river’s basin. Ina median level of runoff water shortages in the basin would

Zusman, Eric

2000-01-01T23:59:59.000Z

485

E.2. Electronic Appendix -Food Web Elements of the Fraser River Upper River (above rkm 210)  

E-Print Network [OSTI]

1 E.2. Electronic Appendix - Food Web Elements of the Fraser River Basin Upper River (above rkm 210, but improvements at pulp mills and waste water treatment plant upgrades are thought to have improved water quality

486

Inhalation carcinogenicity study with nickel metal powder in Wistar rats  

SciTech Connect (OSTI)

Epidemiological studies of nickel refinery workers have demonstrated an association between increased respiratory cancer risk and exposure to certain nickel compounds (later confirmed in animal studies). However, the lack of an association found in epidemiological analyses for nickel metal remained unconfirmed for lack of robust animal inhalation studies. In the present study, Wistar rats were exposed by whole-body inhalation to 0, 0.1, 0.4, and 1.0 mg Ni/m{sup 3} nickel metal powder (MMAD = 1.8 {mu}m, GSD = 2.4 {mu}m) for 6 h/day, 5 days/week for up to 24 months. A subsequent six-month period without exposures preceded the final euthanasia. High mortality among rats exposed to 1.0 mg Ni/m{sup 3} nickel metal resulted in the earlier termination of exposures in this group. The exposure level of 0.4 mg Ni/m{sup 3} was established as the MTD for the study. Lung alterations associated with nickel metal exposure included alveolar proteinosis, alveolar histiocytosis, chronic inflammation, and bronchiolar-alveolar hyperplasia. No increased incidence of neoplasm of the respiratory tract was observed. Adrenal gland pheochromocytomas (benign and malignant) in males and combined cortical adenomas/carcinomas in females were induced in a dose-dependent manner by the nickel metal exposure. The incidence of pheochromocytomas was statistically increased in the 0.4 mg Ni/m{sup 3} male group. Pheochromocytomas appear to be secondary to the lung toxicity associated with the exposure rather than being related to a direct nickel effect on the adrenal glands. The incidence of cortical tumors among 0.4 mg Ni/m{sup 3} females, although statistically higher compared to the concurrent controls, falls within the historical control range; therefore, in the present study, this tumor is of uncertain relationship to nickel metal exposure. The lack of respiratory tumors in the present animal study is consistent with the findings of the epidemiological studies.

Oller, Adriana R. [NiPERA, 2605 Meridian Parkway, Suite 200, Durham, NC 27713 (United States)], E-mail: aoller@nipera.org; Kirkpatrick, Daniel T.; Radovsky, Ann [WIL Research Laboratories, LLC, 1407 George Road, Ashland, OH 44805 8946 (United States); Bates, Hudson K. [NiPERA, 2605 Meridian Parkway, Suite 200, Durham, NC 27713 (United States)

2008-12-01T23:59:59.000Z

487

Prolonged cold storage of red blood cells by oxygen removal and additive usage  

DOE Patents [OSTI]

Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4.degree. C. storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4.degree. C. for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials.

Bitensky, Mark W. (Boston, MA); Yoshida, Tatsuro (Newton, MA)

1998-01-01T23:59:59.000Z

488

Prolonged cold storage of red blood cells by oxygen removal and additive usage  

DOE Patents [OSTI]

Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4 C storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4 C for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials. 8 figs.

Bitensky, M.W.; Yoshida, Tatsuro

1998-08-04T23:59:59.000Z

489

Green River Locks and Dams 3, 4, 5, 6 and Barren River Lock and Dam 1 Disposition, Kentucky  

E-Print Network [OSTI]

Green River Locks and Dams 3, 4, 5, 6 and Barren River Lock and Dam 1 Disposition, Kentucky 16 September 2014 ABSTRACT: Green River Locks and Dams 3 through 6 and Barren River Lock and Dam 1 were. The Green River Locks and Dams 5 and 6 ceased operations in 1951 due to a marked decline in navigation

US Army Corps of Engineers

490

The Columbia River System Inside Story  

SciTech Connect (OSTI)

The Columbia River is one of the greatest natural resources in the western United States. The river and its tributaries touch the lives of nearly every resident of the Pacific Northwest—from fostering world-famous Pacific salmon to supplying clean natural fuel for 50 to 65 percent of the region’s electrical generation. Since early in the 20th century, public and private agencies have labored to capture the benefits of this dynamic river. Today, dozens of major water resource projects throughout the region are fed by the waters of the Columbia Basin river system.

none,

2001-04-01T23:59:59.000Z

491

Savannah River Remediation (SRR) Expanded Staff Meeting  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Savannah River Remediation Delivering the Mission Dave Olson President and Project Manager January 27, 2012 SRS Executive Management Community Discussion 2 * Liquid Waste Funding...

492

Methow River Conservation Easement - May 2009.indd  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the Yakama Nation to fund the Methow Conservancy's acquisition of a 44-acre conservation easement in the Methow River watershed in Okanogan County, Wash., for fi sh habitat...

493

Savannah River Laboratory monthly report, November 1991  

SciTech Connect (OSTI)

This document details monthly activities at the Savannah River Laboratory. Topics addressed are reactor operation; tritium facilities and production; separation operations; environmental concerns; and waste management. (FI)

Ferrell, J.M. (comp.)

1991-01-01T23:59:59.000Z

494

Savannah River Laboratory monthly report, November 1991  

SciTech Connect (OSTI)

This document details monthly activities at the Savannah River Laboratory. Topics addressed are reactor operation; tritium facilities and production; separation operations; environmental concerns; and waste management. (FI)

Ferrell, J.M. [comp.

1991-12-31T23:59:59.000Z

495

Wild and Scenic Rivers Act (Maryland)  

Broader source: Energy.gov [DOE]

It is state policy to protect the outstanding scenic, geologic, ecologic, historic, recreational, agricultural, fish, wildlife, cultural, and other similar values of certain rivers and adjacent...

496

South River EMC- Energy Efficient Rebate Program  

Broader source: Energy.gov [DOE]

South River EMC offers a variety of rebates encouragings its members to invest in energy efficient appliances, equipment, and home upgrades. Incentives are available for clothes washers,...

497

Savannah River Laboratory monthly report, August 1991  

SciTech Connect (OSTI)

This document details monthly activities at the Savannah River Laboratory. Topics addressed are reactor operation, tritium facilities and production; separation operations; environmental concerns; and waste management. (FI)

Ferrell, J.M. [comp.

1991-12-31T23:59:59.000Z

498

Savannah River Laboratory monthly report, August 1991  

SciTech Connect (OSTI)

This document details monthly activities at the Savannah River Laboratory. Topics addressed are reactor operation, tritium facilities and production; separation operations; environmental concerns; and waste management. (FI)

Ferrell, J.M. (comp.)

1991-01-01T23:59:59.000Z

499

New Columbia River Estuary purchases benefit salmon  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

the mouth of the Columbia River to permanently protect riverside habitat for Northwest fish and wildlife, including threatened and endangered salmon and steelhead. The...

500

Preliminary Notice of Violation, Westinghouse Savannah River...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Westinghouse Savannah River Company - EA-2000-08 More Documents & Publications Type B Accident Investigation Board Report on the September 1, 1999, Plutonium Intakes at the...