National Library of Energy BETA

Sample records for usage indicators attached

  1. "Table HC3.10 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  2. "Table HC3.13 Lighting Usage Indicators by Owner-Occupied Housing Unit Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Owner-Occupied Housing Unit Zone, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile Homes"

  3. "Table HC3.5 Space Heating Usage Indicators by Owner-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Owner-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Owner-Occupied Housing Units (millions)","Type of Owner-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  4. "Table HC4.10 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Home Appliances Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  5. "Table HC4.13 Lighting Usage Indicators by Renter-Occupied Housing Unit Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Renter-Occupied Housing Unit Zone, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ,"U.S. Housing Units (millions" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Lighting Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  6. "Table HC4.5 Space Heating Usage Indicators by Renter-Occupied Housing Unit, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Renter-Occupied Housing Unit, 2005" " Million U.S. Housing Units" ,," Renter-Occupied Housing Units (millions)","Type of Renter-Occupied Housing Unit" ," Housing Units (millions)" ,,,"Single-Family Units",,"Apartments in Buildings With--" "Space Heating Usage Indicators",,,"Detached","Attached","2 to 4 Units","5 or More Units","Mobile

  7. "Table HC11.13 Lighting Usage Indicators by Northeast Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Northeast" "Lighting Usage Indicators",,,"Middle Atlantic","New England" "Total U.S. Housing Units",111.1,20.6,15.1,5.5 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between

  8. "Table HC12.13 Lighting Usage Indicators by Midwest Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Midwest" "Lighting Usage Indicators",,,"East North Central","West North Central" "Total U.S. Housing Units",111.1,25.6,17.7,7.9 "Indoor Lights Turned On During Summer" "Number of Lights Turned On"

  9. "Table HC13.13 Lighting Usage Indicators by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total South" "Lighting Usage Indicators",,,"South Atlantic","East South Central","West South Central" "Total U.S. Housing Units",111.1,40.7,21.7,6.9,12.1 "Indoor Lights Turned On During Summer" "Number of Lights

  10. "Table HC14.13 Lighting Usage Indicators by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total West" "Lighting Usage Indicators",,,"Mountain","Pacific" "Total U.S. Housing Units",111.1,24.2,7.6,16.6 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per

  11. "Table HC9.5 Space Heating Usage Indicators by Climate Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000 HDD" ,"Housing Units (millions)" ,,"Greater than 7,000 HDD","5,500 to 7,000 HDD","4,000 to 5,499 HDD","Less than 4,000 HDD" "Space Heating Usage Indicators" "Total U.S. Housing

  12. Table HC15.10 Home Appliances Usage Indicators by Four Most Populated States, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Four Most Populated States, 2005 Total.................................................................................... 111.1 7.1 7.0 8.0 12.1 Cooking Appliances Frequency of Hot Meals Cooked 3 or More Times A Day................................................. 8.2 0.6 0.5 0.8 1.4 2 Times A Day.............................................................. 24.6 1.4 1.5 2.0 3.1 Once a Day...................................................................

  13. Table HC6.5 Space Heating Usage Indicators by Number of Household Members, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Number of Household Members, 2005 Total U.S. Housing Units.................................. 111.1 30.0 34.8 18.4 15.9 12.0 Do Not Have Heating Equipment..................... 1.2 0.3 0.3 Q 0.2 0.2 Have Space Heating Equipment....................... 109.8 29.7 34.5 18.2 15.6 11.8 Use Space Heating Equipment........................ 109.1 29.5 34.4 18.1 15.5 11.6 Have But Do Not Use Equipment.................... 0.8 Q Q Q Q Q Space Heating Usage During 2005

  14. Table HC6.10 Home Appliances Usage Indicators by Number of Household Members, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Number of Household Members, 2005 Total.............................................................................. 111.1 30.0 34.8 18.4 15.9 12.0 Cooking Appliances Frequency of Hot Meals Cooked 3 or More Times A Day........................................... 8.2 1.4 1.9 1.4 1.0 2.4 2 Times A Day........................................................ 24.6 4.3 7.6 4.3 4.8 3.7 Once a Day............................................................ 42.3 9.9

  15. Table HC6.12 Home Electronics Usage Indicators by Number of Household Members, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Home Electronics Usage Indicators by Number of Household Members, 2005 Total................................................................................ 111.1 30.0 34.8 18.4 15.9 12.0 Personal Computers Do Not Use a Personal Computer............................. 35.5 16.3 9.4 4.0 2.7 3.2 Use a Personal Computer.......................................... 75.6 13.8 25.4 14.4 13.2 8.8 Most-Used Personal Computer Type of PC Desk-top Model.....................................................

  16. Table HC6.7 Air-Conditioning Usage Indicators by Number of Household Members, 2005

    U.S. Energy Information Administration (EIA) Indexed Site

    7 Air-Conditioning Usage Indicators by Number of Household Members, 2005 Total........................................................................ 111.1 30.0 34.8 18.4 15.9 12.0 Do Not Have Cooling Equipment.......................... 17.8 5.4 5.3 2.7 2.5 2.0 Have Cooling Equipment...................................... 93.3 24.6 29.6 15.7 13.4 10.0 Use Cooling Equipment....................................... 91.4 24.0 29.1 15.5 13.2 9.7 Have Equipment But Do Not Use it......................

  17. "Table HC9.10 Home Appliances Usage Indicators by Climate Zone, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Climate Zone, 2005" " Million U.S. Housing Units" ,,"Climate Zone1" ,,"Less than 2,000 CDD and --",,,,"2,000 CDD or More and Less than 4,000 HDD" ,"Housing Units (millions)" ,,"Greater than 7,000 HDD","5,500 to 7,000 HDD","4,000 to 5,499 HDD","Less than 4,000 HDD" "Home Appliances Characteristics" "Total",111.1,10.9,26.1,27.3,24,22.8

  18. Usage based indicators to assess the impact of scholarly works: architecture and method

    DOE Patents [OSTI]

    Bollen, Johan; Van De Sompel, Herbert

    2012-03-13

    Although recording of usage data is common in scholarly information services, its exploitation for the creation of value-added services remains limited due to concerns regarding, among others, user privacy, data validity, and the lack of accepted standards for the representation, sharing and aggregation of usage data. A technical, standards-based architecture for sharing usage information is presented. In this architecture, OpenURL-compliant linking servers aggregate usage information of a specific user community as it navigates the distributed information environment that it has access to. This usage information is made OAI-PMH harvestable so that usage information exposed by many linking servers can be aggregated to facilitate the creation of value-added services with a reach beyond that of a single community or a single information service.

  19. "Table HC10.10 Home Appliances Usage Indicators by U.S. Census Regions, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by U.S. Census Regions, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Home Appliances Usage Indicators",,"Northeast","Midwest","South","West" "Total",111.1,20.6,25.6,40.7,24.2 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,1.2,1.4,3,2.6 "2 Times A

  20. "Table HC10.13 Lighting Usage Indicators by U.S. Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Lighting Usage Indicators",,"Northeast","Midwest","South","West" "Total U.S. Housing Units",111.1,20.6,25.6,40.7,24.2 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per

  1. "Table HC10.5 Space Heating Usage Indicators by U.S. Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by U.S. Census Region, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","U.S. Census Region" "Space Heating Usage Indicators",,"Northeast","Midwest","South","West" "Total U.S. Housing Units",111.1,20.6,25.6,40.7,24.2 "Do Not Have Heating Equipment",1.2,"Q","Q","Q",0.7 "Have Space Heating

  2. "Table HC11.10 Home Appliances Usage Indicators by Northeast Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ," U.S. Housing Units (millions) " ,,,"Census Division" ,,"Total Northeast" "Home Appliances Usage Indicators",,,"Middle Atlantic","New England" "Total",111.1,20.6,15.1,5.5 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A

  3. "Table HC11.5 Space Heating Usage Indicators by Northeast Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Northeast Census Region, 2005" " Million U.S. Housing Units" ,,"Northeast Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Northeast" "Space Heating Usage Indicators",,,"Middle Atlantic","New England" "Total U.S. Housing Units",111.1,20.6,15.1,5.5 "Do Not Have Heating Equipment",1.2,"Q","Q","Q"

  4. "Table HC12.10 Home Appliances Usage Indicators by Midwest Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Midwest" "Home Appliances Usage Indicators",,,"East North Central","West North Central" "Total",111.1,25.6,17.7,7.9 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A

  5. "Table HC12.5 Space Heating Usage Indicators by Midwest Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Midwest Census Region, 2005" " Million U.S. Housing Units" ,,"Midwest Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total Midwest" "Space Heating Usage Indicators",,,"East North Central","West North Central" "Total U.S. Housing Units",111.1,25.6,17.7,7.9 "Do Not Have Heating Equipment",1.2,"Q","Q","N"

  6. "Table HC13.10 Home Appliances Usage Indicators by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total South" "Home Appliances Usage Indicators",,,"South Atlantic","East South Central","West South Central" "Total",111.1,40.7,21.7,6.9,12.1 "Cooking Appliances" "Frequency of Hot Meals Cooked"

  7. "Table HC13.5 Space Heating Usage Indicators by South Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by South Census Region, 2005" " Million U.S. Housing Units" ,,"South Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total South" "Space Heating Usage Indicators",,,"South Atlantic","East South Central","West South Central" "Total U.S. Housing Units",111.1,40.7,21.7,6.9,12.1 "Do Not Have Heating

  8. "Table HC14.10 Home Appliances Usage Indicators by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total West" "Home Appliances Usage Indicators",,,"Mountain","Pacific" "Total",111.1,24.2,7.6,16.6 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,2.6,0.7,1.9 "2

  9. "Table HC14.5 Space Heating Usage Indicators by West Census Region, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by West Census Region, 2005" " Million U.S. Housing Units" ,,"West Census Region" ,"U.S. Housing Units (millions)" ,,,"Census Division" ,,"Total West" "Space Heating Usage Indicators",,,"Mountain","Pacific" "Total U.S. Housing Units",111.1,24.2,7.6,16.6 "Do Not Have Heating Equipment",1.2,0.7,"Q",0.7 "Have Space Heating

  10. "Table HC15.10 Home Appliances Usage Indicators by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","Four Most Populated States" "Home Appliances Usage Indicators",,"New York","Florida","Texas","California" "Total",111.1,7.1,7,8,12.1 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,0.6,0.5,0.8,1.4 "2 Times

  11. "Table HC15.13 Lighting Usage Indicators by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    3 Lighting Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"Housing Units (millions)","Four Most Populated States" "Lighting Usage Indicators",,"New York","Florida","Texas","California" "Total U.S. Housing Units",111.1,7.1,7,8,12.1 "Indoor Lights Turned On During Summer" "Number of Lights Turned On" "Between 1 and 4 Hours per

  12. "Table HC15.5 Space Heating Usage Indicators by Four Most Populated States, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Four Most Populated States, 2005" " Million U.S. Housing Units" ,"U.S. Housing Units (millions)","Four Most Populated States" "Space Heating Usage Indicators",,"New York","Florida","Texas","California" "Total U.S. Housing Units",111.1,7.1,7,8,12.1 "Do Not Have Heating Equipment",1.2,"Q","Q","Q",0.2 "Have Space Heating

  13. "Table HC8.10 Home Appliances Usage Indicators by Urban/Rural Location, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Home Appliances Usage Indicators by Urban/Rural Location, 2005" " Million U.S. Housing Units" ,,"Urban/Rural Location (as Self-Reported)" ,"Housing Units (millions)" "Home Appliances Usage Indicators",,"City","Town","Suburbs","Rural" "Total",111.1,47.1,19,22.7,22.3 "Cooking Appliances" "Frequency of Hot Meals Cooked" "3 or More Times A Day",8.2,3.7,1.6,1.4,1.5 "2

  14. "Table HC8.5 Space Heating Usage Indicators by Urban/Rural Location, 2005"

    U.S. Energy Information Administration (EIA) Indexed Site

    5 Space Heating Usage Indicators by Urban/Rural Location, 2005" " Million U.S. Housing Units" ,,"Urban/Rural Location (as Self-Reported)" ,"Housing Units (millions)" "Space Heating Usage Indicators",,"City","Town","Suburbs","Rural" "Total U.S. Housing Units",111.1,47.1,19,22.7,22.3 "Do Not Have Heating Equipment",1.2,0.7,"Q",0.2,"Q" "Have Space Heating

  15. Usage Demographics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Demographics Usage Demographics NERSC Usage Demographics 2014 In 2014, NERSC supported about 6,000 users from universities, national laboratories and industry, working on 849...

  16. Usage Statistics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage Statistics Usage Statistics Genepool Cluster Statistics Period: daily weekly monthly quarter yearly 2year Utilization By Group Jobs Pending Last edited: 2013-09-26 18:21:13...

  17. NERSC Usage Demographics 2010

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 NERSC Usage Demographics 2010 Academic Usage Usage by Discipline DOE & Other Lab Usage Usage by Institution Type Last edited: 2015-03-02 16:21:16...

  18. HSI Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage HSI Usage HSI is a flexible and powerful command-line utility to access the NERSC HPSS storage systems. Like FTP, you can use it to store and retrieve files but it has a much larger set of commands for listing your files and directories, creating directories, changing file permissions, etc. The command set has a UNIX look and feel (e.g. mv, mkdir, rm, cp, cd, etc.) so that moving through your HPSS directory tree is almost identical to what you would find on a UNIX file system. HSI can be

  19. HTAR Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage HTAR Usage HTAR is a command line utility that creates and manipulates HPSS-resident tar-format archive files. It is ideal for storing groups of files in HPSS. Since the tar file is created directly in HPSS, it is generally faster and uses less local space than creating a local tar file then storing that into HPSS. Furthermore, HTAR creates an index file that (by default) is stored along with the archive in HPSS. This allows you to list the contents of an archive without retrieving it to

  20. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G3 Page G3-i ATTACHMENT G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES TABLE OF CONTENTS G3-1 Purpose ........................................................................................................................... 1

  1. Usage Summaries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage Summaries PDSF Group Batch Summary Year Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 2016 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 Partial SGE62 2015 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 2014 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 2013 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 2012 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62 SGE62

  2. Fenestration Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    new windows for residential and commercial buildings. Attachments Energy Rating Council (AERC), National Fenestration Rating Council (NFRC), window coverings manufacturers, ...

  3. usage_household2001.pdf

    Gasoline and Diesel Fuel Update (EIA)

    Contact: Stephanie J. Battles, Survey Manager (stephanie.battles@eia.doe.gov) World Wide Web: http:www.eia.doe.govemeuconsumption Table HC6-1a. Usage Indicators by Climate ...

  4. Window Attachments

    Energy Savers [EERE]

    ... shades Surface applied film Cellular shade Window quilt Seasonal film kit Louvered blinds Roller shades Solar screens Cellular shades Surface applied films Exterior attachments ...

  5. Attachment B

    Office of Environmental Management (EM)

    B HAZARDOUS WASTE PERMIT APPLICATION PART A Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT B Page B-i of 52 ATTACHMENT B HAZARDOUS WASTE PERMIT APPLICATION PART A TABLE OF CONTENTS PART A - HAZARDOUS WASTE PERMIT APPLICATION ......................................................... 1 RCRA PART A APPLICATION CERTIFICATION

  6. Attachment E

    Office of Environmental Management (EM)

    E INSPECTION SCHEDULE, PROCESS AND FORMS Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 2014 PERMIT ATTACHMENT E Page E-i ATTACHMENT E INSPECTION SCHEDULE, PROCESS AND FORMS TABLE OF CONTENTS Introduction ................................................................................................................................. 1 E-1 Inspection Schedule

  7. Attachment L

    Office of Environmental Management (EM)

    L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT L Page L-i ATTACHMENT L WIPP GROUNDWATER DETECTION MONITORING PROGRAM PLAN TABLE OF CONTENTS L-1 Introduction ..................................................................................................................... 1 L-1a Geologic and Hydrologic

  8. Attachment N

    Office of Environmental Management (EM)

    N VOLATILE ORGANIC COMPOUND MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT N Page N-i ATTACHMENT N VOLATILE ORGANIC COMPOUND MONITORING PLAN TABLE OF CONTENTS N-1 Introduction ..................................................................................................................... 1 N-1a Background

  9. Attachment O

    Office of Environmental Management (EM)

    O WIPP MINE VENTILATION RATE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit May 8, 2012 PERMIT ATTACHMENT O Page O-1 of 14 1 ATTACHMENT O 2 WIPP MINE VENTILATION RATE MONITORING PLAN 3 TABLE OF CONTENTS 4 O-1 Definitions ....................................................................................................................... 2 5 O-2 Objective

  10. NERSC Usage Demographics 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 NERSC Usage Demographics 2011 Last edited: 2016-08-18 15:54:34

  11. NERSC Usage Demographics 2012

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 NERSC Usage Demographics 2012 Last edited: 2016-06-29 14:26:22

  12. NERSC Usage Demographics 2013

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 NERSC Usage Demographics 2013 Last edited: 2016-06-29 14:27:1

  13. ATTACHMENT J

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Contract No. DE-AC02-07CH11358 Contract Modification No. 0145 Section J, Appendix A J-A-1 ATTACHMENT J.1 APPENDIX A ADVANCE UNDERSTANDINGS ON HUMAN RESOURCES Applicable to the...

  14. Attachment 4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

    1 of 6 High-Level Bases and Assumptions for the WTP Project Baseline 1. The

  15. Attachment K

    Office of Environmental Management (EM)

    SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT K Page K-i ATTACHMENT K SOLID WASTE MANAGEMENT UNIT (SWMU) AND AREA OF CONCERN (AOC) TABLES LIST OF TABLES Table Title Table K-1 Solid Waste Management Units (SWMUs) & Areas of Concern (AOCs) Requiring Corrective Action Table K-2 SWMUs & AOCs

  16. Advanced Usage Examples

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Examples Advanced Usage Examples Transferring Data from Batch Jobs Once you have set up your automatic HPSS authentication you can access HPSS within batch scripts. Read More ...

  17. NERSC Usage Demographics 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 NERSC Usage Demographics 2014 In 2014, NERSC supported about 6,000 users from universities, national laboratories and industry, working on 849 projects with allocations of NERSC...

  18. Attachment C1

    Office of Environmental Management (EM)

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL (33.78 KB) More Documents & Publications Attachment C

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx (34.24 KB) More Documents & Publications Attachment C -

    C1 WASTE CHARACTERIZATION TESTING METHODS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013

  19. NERSC Usage and User Demographics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Usage Demographics Users and Projects Through the Years Careers Visitor Info Web Policies Home » About » Usage and User Demographics NERSC Usage and User Demographics Usage Demographics Number of NERSC Users and Projects Through the Years Number of NERSC Users and Projects Through the Years Read More » Last edited: 2015-03-02 16:21:25

  20. How usage is charged

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    usage is charged How usage is charged MPP Charging (Computational Systems) When a job runs on a NERSC MPP system, such as Hopper, charges accrue against one of the user's repository allocations. The unit of accounting for these charges is the "MPP Hour". A parallel job is charged for exclusive use of each multi-core node allocated to the job. The MPP charge for such a job is calculated as the product of: the job's elapsed wall-clock time in hours the number of nodes allocated to the

  1. NERSC Usage Demographics 2014

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 NERSC Usage Demographics 2014 In 2014, NERSC supported about 6,000 users from universities, national laboratories and industry, working on 849 projects with allocations of NERSC resources. Our users come from across the U.S. and around the globe, with 48 states and 46 countries represented. Last edited: 2016-06-29 14:26:5

  2. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit ... ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF ...

  3. Belt attachment and system

    DOE Patents [OSTI]

    Schneider, Abraham D.; Davidson, Erick M.

    2016-02-02

    Disclosed herein is a belt assembly including a flexible belt with an improved belt attachment. The belt attachment includes two crossbars spaced along the length of the belt. The crossbars retain bearings that allow predetermined movement in six degrees of freedom. The crossbars are connected by a rigid body that attaches to the bearings. Implements that are attached to the rigid body are simply supported but restrained in pitching rotation.

  4. Federal Water Use Indices

    Broader source: Energy.gov [DOE]

    FEMP provides water use indices as a guide for Federal agencies. Note that each is a rough estimate of water usage at different types of sites. Your site may vary considerably.

  5. File:Energy Data Jam - Attachment C.pdf | Open Energy Information

    Open Energy Info (EERE)

    Involved Help Apps Datasets Community Login | Sign Up Search File Edit History File:Energy Data Jam - Attachment C.pdf Jump to: navigation, search File File history File usage...

  6. Blade attachment assembly

    DOE Patents [OSTI]

    Garcia-Crespo, Andres Jose; Delvaux, John McConnell; Miller, Diane Patricia

    2016-05-03

    An assembly and method for affixing a turbomachine rotor blade to a rotor wheel are disclosed. In an embodiment, an adaptor member is provided disposed between the blade and the rotor wheel, the adaptor member including an adaptor attachment slot that is complementary to the blade attachment member, and an adaptor attachment member that is complementary to the rotor wheel attachment slot. A coverplate is provided, having a coverplate attachment member that is complementary to the rotor wheel attachment slot, and a hook for engaging the adaptor member. When assembled, the coverplate member matingly engages with the adaptor member, and retains the blade in the adaptor member, and the assembly in the rotor wheel.

  7. High Performance Window Attachments

    Broader source: Energy.gov (indexed) [DOE]

    Statement: * A wide range of residential window attachments are available, but they ... to model wide range of window coverings * Performed window coverings ...

  8. Attachment C4

    Office of Environmental Management (EM)

    C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C4 Page C4-i ATTACHMENT C4 TRU MIXED WASTE CHARACTERIZATION USING ACCEPTABLE KNOWLEDGE TABLE OF CONTENTS C4-1 Introduction ..................................................................................................................... 1 C4-2

  9. Attachment C6

    Office of Environmental Management (EM)

    C6 AUDIT AND SURVEILLANCE PROGRAM Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C6 Page C6-i ATTACHMENT C6 AUDIT AND SURVEILLANCE PROGRAM TABLE OF CONTENTS C6-1 Introduction ..................................................................................................................... 1 C6-2 Audit Procedures

  10. Attachment H1

    Office of Environmental Management (EM)

    H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 1, 2012 PERMIT ATTACHMENT H1 Page H1-i ATTACHMENT H1 ACTIVE INSTITUTIONAL CONTROLS DURING POST-CLOSURE TABLE OF CONTENTS Introduction ................................................................................................................................. 1 H1.1 Active

  11. Attachment 3 of 5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures for Lease Acquisition (45.31 KB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study | Department of Energy

    2:

  12. Attachment C3

    Office of Environmental Management (EM)

    C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit February 2014 PERMIT ATTACHMENT C3 Page C3-i ATTACHMENT C3 QUALITY ASSURANCE OBJECTIVES AND DATA VALIDATION TECHNIQUES FOR WASTE CHARACTERIZATION METHODS TABLE OF CONTENTS C3-1 Validation Methods

  13. Attachment C5

    Office of Environmental Management (EM)

    C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit March 13, 2013 PERMIT ATTACHMENT C5 Page C5-i ATTACHMENT C5 QUALITY ASSURANCE PROJECT PLAN REQUIREMENTS TABLE OF CONTENTS C5-1 Quality Assurance Project Plans ...................................................................................... 1 C5-2 Document Review, Approval, and Control

  14. Attachment F2

    Office of Environmental Management (EM)

    F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT F2 Page F2-i ATTACHMENT F2 TRAINING COURSE AND QUALIFICATION CARD OUTLINES TABLE OF CONTENTS Course Outlines .......................................................................................................................... 1 GET-19X/GET-20X/GET-21X - General

  15. Attachment G2

    Office of Environmental Management (EM)

    G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 PERMIT ATTACHMENT G2 Page G2-i ATTACHMENT G2 WASTE ISOLATION PILOT PLANT SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT ADAPTED FROM: SAND96-1326/1 DISTRIBUTION UNLIMITED RELEASE CATEGORY UC-721 PRINTED AUGUST 1996 WASTE ISOLATION PILOT PLANT

  16. Attachment N1

    Office of Environmental Management (EM)

    N1 HYDROGEN AND METHANE MONITORING PLAN Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit January 31, 2012 PERMIT ATTACHMENT N1 Page N1-i ATTACHMENT N1 HYDROGEN AND METHANE MONITORING PLAN TABLE OF CONTENTS N1-1 Introduction ..................................................................................................................... 1 N1-2 Parameters to be Analyzed and Monitoring Design

  17. Micromechanical die attachment surcharge

    DOE Patents [OSTI]

    Filter, William F.; Hohimer, John P.

    2002-01-01

    An attachment structure is disclosed for attaching a die to a supporting substrate without the use of adhesives or solder. The attachment structure, which can be formed by micromachining, functions purely mechanically in utilizing a plurality of shaped pillars (e.g. round, square or polygonal and solid, hollow or slotted) that are formed on one of the die or supporting substrate and which can be urged into contact with various types of mating structures including other pillars, a deformable layer or a plurality of receptacles that are formed on the other of the die or supporting substrate, thereby forming a friction bond that holds the die to the supporting substrate. The attachment structure can further include an alignment structure for precise positioning of the die and supporting substrate to facilitate mounting the die to the supporting substrate. The attachment structure has applications for mounting semiconductor die containing a microelectromechanical (MEM) device, a microsensor or an integrated circuit (IC), and can be used to form a multichip module. The attachment structure is particularly useful for mounting die containing released MEM devices since these devices are fragile and can otherwise be damaged or degraded by adhesive or solder mounting.

  18. Energy Savings from Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... of window combinations with window attachments in typical residential buildings and in varied ... The most common and widely used types of attachments are window coverings ...

  19. "Table HC1.4 Cooled Floorspace Usage Indicators, 2005" " ...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,0.3,1,1.1,1.1,0.8,0.5,1.5 ... "At Home Behavior" "Home Used for Business" "Yes",7,34.5,16.7,16,13.5,21.1,22.7,14....

  20. "Table HC1.3 Heated Floorspace Usage Indicators, 2005" " ...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",8.9,"Q",1.3,1.4,1.6,1,"4 0.9",2 ... "At Home Behavior" "Home Used for Business" "Yes",5.7,32.2,14.6,13.8,12.9,15.2,16.7...

  1. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, G.L.

    1994-12-13

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion. 3 figures.

  2. Ceramic blade attachment system

    DOE Patents [OSTI]

    Boyd, Gary L. (Alpine, CA)

    1994-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a pair of recessed portions thereon. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings have a pair of grooves therein in which are positioned a pair of pins having a generally rectangular cross-section and a reaction surface thereon. A pair of cylindrical rollers interposed respective ones of the pair of reaction surfaces and the pair of recessed portions. The attachment system or turbine assembly provides an economical, reliable and effective attachment of a component having a preestablished rate of thermal expansion to a component having a greater preestablished rate of thermal expansion.

  3. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  4. Magnetically attached sputter targets

    DOE Patents [OSTI]

    Makowiecki, D.M.; McKernan, M.A.

    1994-02-15

    An improved method and assembly for attaching sputtering targets to cathode assemblies of sputtering systems which includes a magnetically permeable material is described. The magnetically permeable material is imbedded in a target base that is brazed, welded, or soldered to the sputter target, or is mechanically retained in the target material. Target attachment to the cathode is achieved by virtue of the permanent magnets and/or the pole pieces in the cathode assembly that create magnetic flux lines adjacent to the backing plate, which strongly attract the magnetically permeable material in the target assembly. 11 figures.

  5. Ladder attachment platform

    DOE Patents [OSTI]

    Swygert,; Richard, W [Springfield, SC

    2012-08-28

    A ladder attachment platform is provided that includes a base for attachment to a ladder that has first and second side rails and a plurality of rungs that extend between in a lateral direction. Also included is a user platform for having a user stand thereon that is carried by the base. The user platform may be positioned with respect to the ladder so that it is not located between a first plane that extends through the first side rail and is perpendicular to the lateral direction and a second plane that extends through the second side rail and is perpendicular to the lateral direction.

  6. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, Richard M.; Chesnut, Dwayne A.; Henning, Carl D.; Lennon, Joseph P.; Pastrnak, John W.; Smith, Joseph A.

    1994-01-01

    An attachment mechanism for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection.

  7. 2011 Radioactive Materials Usage Survey for Unmonitored Point Sources

    SciTech Connect (OSTI)

    Sturgeon, Richard W.

    2012-06-27

    organized. The RMUS Interview Form with the attached RMUS Process Form(s) provides the radioactive materials survey data by technical area (TA) and building number. The survey data for each release point includes information such as: exhaust stack identification number, room number, radioactive material source type (i.e., potential source or future potential source of air emissions), radionuclide, usage (in curies) and usage basis, physical state (gas, liquid, particulate, solid, or custom), release fraction (from Appendix D to 40 CFR 61, Subpart H), and process descriptions. In addition, the interview form also calculates emissions (in curies), lists mrem/Ci factors, calculates PEDEs, and states the location of the critical receptor for that release point. [The critical receptor is the maximum exposed off-site member of the public, specific to each individual facility.] Each of these data fields is described in this section. The Tier classification of release points, which was first introduced with the 1999 usage survey, is also described in detail in this section. Section 4 includes a brief discussion of the dose estimate methodology, and includes a discussion of several release points of particular interest in the CY 2011 usage survey report. It also includes a table of the calculated PEDEs for each release point at its critical receptor. Section 5 describes ES's approach to Quality Assurance (QA) for the usage survey. Satisfactory completion of the survey requires that team members responsible for Rad-NESHAP (National Emissions Standard for Hazardous Air Pollutants) compliance accurately collect and process several types of information, including radioactive materials usage data, process information, and supporting information. They must also perform and document the QA reviews outlined in Section 5.2.6 (Process Verification and Peer Review) of ES-RN, 'Quality Assurance Project Plan for the Rad-NESHAP Compliance Project' to verify that all information is complete and

  8. Department of Energy Federal Acquisition Regulation Clause Usage Guide

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached for your information is a corrected Department of Energy Federal Acquisition Regulation Clause Usage Guide. This corrected clause matrix is also being posted to the Stripes library. The earlier edition incorrectly designated 52.223-4 Recovered Material Certification and 52.223-9 Estimate of Percentage of Recovered Material Content for EPA-Designated Items, as Not Applicable under management and operating contracts and other facility management contracts. They are actually required clauses as 52.223-17 requires the use of such products in service and construction contracts. They are also being designated as required under the service and construction contract columns.

  9. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, Paul F.; Shaffer, James E.

    1995-01-01

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and being attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine.

  10. Turbine nozzle attachment system

    DOE Patents [OSTI]

    Norton, P.F.; Shaffer, J.E.

    1995-10-24

    A nozzle guide vane assembly having a preestablished rate of thermal expansion is positioned in a gas turbine engine and is attached to conventional metallic components. The nozzle guide vane assembly includes a pair of legs extending radially outwardly from an outer shroud and a pair of mounting legs extending radially inwardly from an inner shroud. Each of the pair of legs and mounting legs have a pair of holes therein. A plurality of members attached to the gas turbine engine have a plurality of bores therein which axially align with corresponding ones of the pair of holes in the legs. A plurality of pins are positioned within the corresponding holes and bores radially positioning the nozzle guide vane assembly about a central axis of the gas turbine engine. 3 figs.

  11. CBECS 2012: Energy Usage Summary

    U.S. Energy Information Administration (EIA) Indexed Site

    2012 Commercial Buildings Energy Consumption Survey: Energy Usage Summary CBECS 2012 - Release date: March 18, 2016 Despite a 14% increase in total buildings and a 22% increase in total floorspace since 2003, energy use in the estimated 5.6 million U.S. commercial buildings was up just 7% during the same period, according to new analysis from the 2012 Commercial Buildings Energy Consumption Survey (CBECS). Slower growth in commercial building energy demand since 2003 is explained in part by

  12. Opportunistic Resource Usage in CMS

    SciTech Connect (OSTI)

    Kreuzer, Peter; Hufnagel, Dirk; Dykstra, D.; Gutsche, O.; Tadel, M.; Sfiligoi, I.; Letts, J.; Wuerthwein, F.; McCrea, A.; Bockelman, B.; Fajardo, E.; Linares, L.; Wagner, R.; Konstantinov, P.; Blumenfeld, B.; Bradley, D.

    2014-01-01

    CMS is using a tiered setup of dedicated computing resources provided by sites distributed over the world and organized in WLCG. These sites pledge resources to CMS and are preparing them especially for CMS to run the experiment's applications. But there are more resources available opportunistically both on the GRID and in local university and research clusters which can be used for CMS applications. We will present CMS' strategy to use opportunistic resources and prepare them dynamically to run CMS applications. CMS is able to run its applications on resources that can be reached through the GRID, through EC2 compliant cloud interfaces. Even resources that can be used through ssh login nodes can be harnessed. All of these usage modes are integrated transparently into the GlideIn WMS submission infrastructure, which is the basis of CMS' opportunistic resource usage strategy. Technologies like Parrot to mount the software distribution via CVMFS and xrootd for access to data and simulation samples via the WAN are used and will be described. We will summarize the experience with opportunistic resource usage and give an outlook for the restart of LHC data taking in 2015.

  13. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, deceased, Gary A. (late of Poway, CA); Jimenez, Oscar D. (Escondia, CA)

    1996-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed therebetween. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. And, a pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade.

  14. Ceramic blade attachment system

    DOE Patents [OSTI]

    Frey, G.A.; Jimenez, O.D.

    1996-12-03

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine flange having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine flange includes a first upstanding flange and a second upstanding flange having a groove formed between them. The turbine flange further includes a recess. Each of the first and second upstanding flanges have a plurality of bores therein. A turbine blade has a first member and a second member positioned in one of the groove and the recess. Each of the first member and the second member have a plurality of bores therein. A pin is positioned in respective ones of the plurality of bores in the first and second upstanding members and the first and second members and attach the blade to the turbine flange. The pin has a preestablished rate of thermal expansion being substantially equal to the rate of thermal expansion of the blade. 4 figs.

  15. Appendix TFIELD Attachment A: Attachment A: TFIELD-2014 Visualization

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment A: TFIELD-2014 Visualization United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Compliance Recertification Application 2014 Attachment A: TFIELD-2014 Visualization This attachment contains figures for Appendix TFIELD-2014, related to the Culebra T-Field calibration process, performed as part of the 2009 Compliance Recertification Application (CRA-2009) Performance Assessment Baseline Calculation (PABC). These parameter inputs and

  16. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-01-10

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figures.

  17. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine wheel having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade. The turbine blade has a root portion having a first groove and a second groove therein. The turbine wheel includes a plurality of openings in which the turbine blade is positioned. Each of the openings has a first groove and a second groove therein. The space or void formed between the first grooves and the second grooves has a plurality of spherical balls positioned therein. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  18. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade.

  19. Ceramic blade attachment system

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-11

    A turbine blade having a preestablished rate of thermal expansion is attached to a turbine disc having a preestablished rate of thermal expansion being greater than the preestablished rate of thermal expansion of the turbine blade and forms a turbine assembly. The turbine blade has a root portion defining a pair of sides having a pair of grooves therein. The turbine assembly includes a pair of flanges between which the turbine blades are positioned. Each of the pair of flanges has a plurality of grooves defined therein. The grooves within the pair of flanges are aligned with the grooves in the blades and have a space formed therebetween. A plurality of spherical balls are positioned within the space. The plurality of spherical balls has a preestablished rate of thermal expansion being equal to the preestablished rate of thermal expansion of the turbine blade. 4 figs.

  20. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    level testing for NSDD Core installations DE-SOL-0008449 Attachment L-2b [Submit in Volume II, TAB 1] Instructions Attachment L-2b: Note: Attachment L-1a is limited to one (1) 8 ½ x 11 page limit. Experiences provided must be relevant to the work that the team member will be performing under this contract. The Offeror shall explain how the work performed by the experience is relevant to the indicator. Relevance is defined by Indicator as follows: A. Relevance to indicator A. is defined as

  1. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued Unrevised SFO Paragraphs Reissued (35.68 KB) More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

    B - J Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. Contract Section Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA B B.2 Modify contract to obligate

  2. Attachment 6 - Government Property List

    National Nuclear Security Administration (NNSA)

    2 EQUIPMENT - HANDHELD COMPUTER - WIRELESS WHEEL LOAD SYSTEM 1 EQUIPMENT - HEAT STRESS MONITOR 5 EQUIPMENT - HOIST - PORTABLE 1 November 20, 2013 DE-SOL-0005982 Attachment 6...

  3. Attachment G3

    Office of Environmental Management (EM)

    G3 RADIOLOGICAL SURVEYS TO INDICATE POTENTIAL HAZARDOUS WASTE RELEASES Waste Isolation Pilot Plant Hazardous Waste Permit October 2013 (This page intentionally blank) Waste ...

  4. RFP Section L Attachment Templates

    Broader source: Energy.gov [DOE]

    On March 29,2010, six draft RFP Section L Attachment templates (Past Performance Information Questionnaire, Past Performance Questionnaire Cover Letter, Letter of Commitment, Past Performance Reference Information Form, ESH&Q Past Performance Information Form, and Resume Format) were distributed for Procurement Director (PD) and Head of Contracting Activity (HCA) review and comment. All comments received were considered and changes were made as appropriate. The final versions of the six aforementioned RFP Section L Attachment templates will be e-mailed directly to the Procurement Directors and made available in the STRIPES Library. For RFP's generated in STRIPES, the Section L Attachments should be identified in clause DOE-L-1033 and the file with each Attachment should be attached to the RFP.

  5. Attachment C: Optional AIP Provisions

    Broader source: Energy.gov [DOE]

    This attachment contains sample language for a number of optional provisions that sites may choose to include or not to include in their AIPs. Optional AIP provisions are not mandatory and the...

  6. Attachment 1 - Performance Work Statement

    National Nuclear Security Administration (NNSA)

    including TTR. Waste acceptance services will be performed at the NNSS and at waste generator sites. DE-SOL-0005982 Attachment 1 Page 1 2. Scope of Work 2.1 Requirement: The EPS...

  7. Recent Trends in Car Usage in Advanced Economies - Slower Growth...

    Open Energy Info (EERE)

    Trends in Car Usage in Advanced Economies - Slower Growth Ahead? Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Recent Trends in Car Usage in Advanced Economies -...

  8. Documentation of INL's In Situ Oil Shale Retorting Water Usage...

    Office of Scientific and Technical Information (OSTI)

    Oil Shale Retorting Water Usage System Dynamics Model Citation Details In-Document Search Title: Documentation of INL's In Situ Oil Shale Retorting Water Usage System Dynamics ...

  9. Level: National Data; Row: NAICS Codes; Column: Usage within...

    Gasoline and Diesel Fuel Update (EIA)

    Technologies, 2010; Level: National Data; Row: NAICS Codes; Column: Usage within ... Technologies, 2010; Level: National Data; Row: NAICS Codes; Column: Usage within ...

  10. Enhanced tamper indicator

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.

    2003-07-08

    The present invention provides an apparatus and method whereby the reliability and tamper-resistance of tamper indicators can be improved. A flexible connector may be routed through a latch for an enclosure such as a door or container, and the free ends of the flexible connector may be passed through a first locking member and firmly attached to an insert through the use of one or more attachment members such as set screws. A second locking member may then be assembled in interlocking relation with the first locking member to form an interlocked assembly around the insert. The insert may have one or more sharp projections extending toward the first or second locking member so that any compressive force applied in an attempt to disassemble the interlocked assembly results in permanent, visible damage to the first or second locking member.

  11. ATTACHMENT

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... to be Public 7 PII and includes, for example, first and last name, address, work telephone number, e-mail address, home telephone number, and general educational credentials. ...

  12. ATTACHMENT

    Broader source: Energy.gov (indexed) [DOE]

    Pages. Under Estimated Total Size, you will see the original file size and the 3. Click OK to accept the file size compression. compressed file size. U.S. Department of Energy,...

  13. ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE

    National Nuclear Security Administration (NNSA)

    SOURCE SELECTION INFORMATION - SEE FAR 3.104 (When Filled-In) 1 ATTACHMENT F PAST PERFORMANCE QUESTIONNAIRE Offerors are responsible for sending copies of the PAST PERFORMANCE QUESTIONNAIRE (SECTIONs A thru C) to references. Instructions to Offeror 1. For each reference submitted in your proposal, enter the required information in Section A. 2. Transmit the entire questionnaire to the identified Points of Contract (POCs) and place one copy of each Section A in your proposal submittal. NOTES:

  14. Attachment L-1 - Entity Certificates

    National Nuclear Security Administration (NNSA)

    3] Attachment L-1 1 ENTITY CERTIFICATE The offeror shall submit evidence to substantiate the authority of the person signing the offer and submit in Volume I of the proposal. CERTIFICATE I, _______________________________________________, certify that I have the signatory authority as the _________________________________________ to sign this offer/contract on behalf of said entity and to bind the entity by the authority of its governing body and within the scope of its powers. Affix the

  15. Attachment D: Mandatory Provisions if Applicable

    Broader source: Energy.gov [DOE]

    This attachment contains provisions that may be mandatory for an AIP if the State: (1) chooses to develop an emergency response program but does not want to use the suggested language in Attachment...

  16. Microsoft Word - Attachment I.doc

    Office of Environmental Management (EM)

    SCHEDULE RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT I Page I-i ATTACHMENT I COMPLIANCE SCHEDULE RESERVED

  17. Microsoft Word - Attachment M.doc

    Office of Environmental Management (EM)

    M FIGURES RESERVED Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT M Page M-i ATTACHMENT M FIGURES RESERVED

  18. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title...

  19. Attachment C … Waste Analysis Plan

    Office of Environmental Management (EM)

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations (28.18 KB) More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME

  20. Attachments Energy Ratings Council | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachments Energy Ratings Council Attachments Energy Ratings Council Attachments Energy Ratings Council Lead Performer: Window Covering Manufacturing Association - New York, NY DOE Funding: $1,600,000 Project Term: October 1, 2014 - September 30, 2018 Funding Opportunity Announcement: Certification and Rating Attachments for Fenestration Technologies DE-FOA-001000-1504 Project Objective This project is to develop an independent rating, certification, labeling, and performance verification

  1. Shading, Films and Window Attachments Market Report

    Broader source: Energy.gov [DOE]

    Shading, Films and Window Attachments (SFWA) Market Report, March 13, 2016, from the Consortium for Building Energy Innovation.

  2. ATTACHMENT J.7 - APPENDIX G

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-1 ATTACHMENT J.7 APPENDIX G PURCHASING SYSTEM REQUIREMENTS Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No. DE-AC02-09CH11466 Section J - Appendix G J-G-2 Appendix G Purchasing System Requirements This Appendix and Clause I.146 "Contractor Purchasing System," sets forth DOE requirements applicable to the Purchasing System established under the Contract

  3. Split ring containment attachment device

    DOE Patents [OSTI]

    Sammel, Alfred G.

    1996-01-01

    A containment attachment device 10 for operatively connecting a glovebag 200 to plastic sheeting 100 covering hazardous material. The device 10 includes an inner split ring member 20 connected on one end 22 to a middle ring member 30 wherein the free end 21 of the split ring member 20 is inserted through a slit 101 in the plastic sheeting 100 to captively engage a generally circular portion of the plastic sheeting 100. A collar potion 41 having an outer ring portion 42 is provided with fastening means 51 for securing the device 10 together wherein the glovebag 200 is operatively connected to the collar portion 41.

  4. DNA attachment to support structures

    DOE Patents [OSTI]

    Balhorn, Rodney L.; Barry, Christopher H.

    2002-01-01

    Microscopic beads or other structures are attached to nucleic acids (DNA) using a terminal transferase. The transferase adds labeled dideoxy nucleotide bases to the ends of linear strands of DNA. The labels, such as the antigens digoxigenin and biotin, bind to the antibody compounds or other appropriate complementary ligands, which are bound to the microscopic beads or other support structures. The method does not require the synthesis of a synthetic oligonucleotide probe. The method can be used to tag or label DNA even when the DNA has an unknown sequence, has blunt ends, or is a very large fragment (e.g., >500 kilobase pairs).

  5. Attachment A -- Deliverables.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I Deliverables Attachment A TOC Deliverables DE-AC27-08RV14800 SEC. FAR/DEAR Clause Reference Description Action Timing TFP CO ESQ OPA IR/HR ORP MGR DCAA I.2 FAR 52.202-1 Definitions (JUL 2004) as supplemented by DEAR 952.202-1 (Mar 2002) Verify compliance As Required L I.3 FAR 52.203-3 Gratuities (APR 1984) Verify compliance As Required L I.4 FAR 52.203-5 Covenant Against Contingent Fees (APR 1984) Verify compliance As Required L I.5 FAR 52.203-6 Restrictions on Subcontractor Sales to the

  6. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment O

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    O DE-AC36-08GO28308 Modification M1033 Attachment O

  7. Methane production by attached film

    DOE Patents [OSTI]

    Jewell, William J.

    1981-01-01

    A method for purifying wastewater of biodegradable organics by converting the organics to methane and carbon dioxide gases is disclosed, characterized by the use of an anaerobic attached film expanded bed reactor for the reaction process. Dilute organic waste material is initially seeded with a heterogeneous anaerobic bacteria population including a methane-producing bacteria. The seeded organic waste material is introduced into the bottom of the expanded bed reactor which includes a particulate support media coated with a polysaccharide film. A low-velocity upward flow of the organic waste material is established through the bed during which the attached bacterial film reacts with the organic material to produce methane and carbon dioxide gases, purified water, and a small amount of residual effluent material. The residual effluent material is filtered by the film as it flows upwardly through the reactor bed. In a preferred embodiment, partially treated effluent material is recycled from the top of the bed to the bottom of the bed for further treatment. The methane and carbon dioxide gases are then separated from the residual effluent material and purified water.

  8. NREL Transportation Project to Reduce Fuel Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transportation Project to Reduce Fuel Usage For more information contact: Sarah Holmes Barba, 303-275-3023 email: Sarah Barba Golden, Colo., Mar. 23, 2001 - The Jefferson County Seniors Resource Center (SRC) Paratransit Service has become an important part of Eulalia Gaillard's life since her stroke in 1996. She calls on SRC to drive her to cardiologist, neurologist and chiropractor appointments each week. "It's wonderful," Gaillard says. "I'd give this program 150 plus in regards

  9. Microsoft Word - Policy Flash 2010-77 Attachment | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    7 Attachment Microsoft Word - Policy Flash 2010-77 Attachment Microsoft Word - Policy Flash 2010-77 Attachment More Documents & Publications Microsoft Word - Policy Flash 2010-78...

  10. Microsoft Word - Attachment 3 Recovery Act notification | Department...

    Energy Savers [EERE]

    Microsoft Word - Attachment 3 Recovery Act notification Microsoft Word - Attachment 3 Recovery Act notification More Documents & Publications Microsoft Word - Attachment 3 Recovery...

  11. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents & Publications Microsoft Word - Policy Flash...

  12. Attached is Policy Flash 2013-44 Acquisition Guide- Allowability...

    Energy Savers [EERE]

    Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is Policy Flash 2013-44 Acquisition Guide- Allowability of Incurred Costs Attached is...

  13. Attachment FY2011-75 OPAM | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    OPAM Attachment FY2011-75 OPAM Federal Supply Schedules Attachment FY2011-75 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  14. Data Center Metering and Power Usage Effectiveness | Department...

    Office of Environmental Management (EM)

    Data Center Metering and Power Usage Effectiveness Data Center Metering and Power Usage Effectiveness July 28, 2016 2:00PM to 3:00PM EDT Webinar will cover material from the Data ...

  15. Guideline For Retrieving Customer Usage Data From Utilities

    Broader source: Energy.gov [DOE]

    This webinar, held on Dec. 16, 2010, provides information for utilities interested in retrieving data on customer usage.

  16. Position indicator

    DOE Patents [OSTI]

    Tanner, David E.

    1981-01-01

    A nuclear reactor system is described in which a position indicator is provided for detecting and indicating the position of a movable element inside a pressure vessel. The movable element may be a valve element or similar device which moves about an axis. Light from a light source is transmitted from a source outside the pressure vessel to a first region inside the pressure vessel in alignment with the axis of the movable element. The light is redirected by a reflector prism to a second region displaced radially from the first region. The reflector prism moves in response to movement of the movable element about its axis such that the second region moves arcuately with respect to the first region. Sensors are arrayed in an arc corresponding to the arc of movement of the second region and signals are transmitted from the sensors to the exterior of the reactor vessel to provide indication of the position of the movable element.

  17. ATTACHMENT J.3 - APPENDIX C

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    99 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-1 ATTACHMENT J.3 APPENDIX C SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT Applicable to the Operation of PPPL Contract No. DE-AC02-09CH11466 Modification No. 0199 Contract No.: DE-AC02-09CH11466 Section J - Appendix C J-C-2 Modification N o: 0 199 Contract N o: D E---AC02---09CH11466 Section J --- A ppendix C Information c ontained i n t his d ocument i s r estricted. C ontact P PPL v ia e mail--- j delooper@pppl.gov t o r equest a

  18. al99-06attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    attachment.doc&0; al99-06attachment.doc&0; PDF icon al99-06attachment.doc&0; More Documents & Publications Microsoft Word - AL2000-05Attachment.doc Microsoft Word - NSRC...

  19. Microsoft Word - Attachment J-4 Legal Management Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4-1 ATTACHMENT J.4. LEGAL MANAGEMENT

  20. AttachmentFlash_2010-55.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AttachmentFlash2010-55.pdf More Documents & Publications AttachmentFlash2010-66.pdf AttachmentFlash2010-73(3).pdf AttachmentFlash2010-33(2).pdf...

  1. Building America Expert Meeting: Cladding Attachment Over Exterior...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building America Expert Meeting: Cladding Attachment Over Exterior Insulation Building Science...

  2. Bonneville Power Administration Attachment P Oversupply Management...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    reduced generation in order to meet the Transmission Customers' schedules. The Oversupply Management Protocol will apply as follows: 1. The term of this attachment is March 31,...

  3. Introducing the Attachments Energy Ratings Council

    Broader source: Energy.gov [DOE]

    In collaboration with the U.S. Department of Energy (DOE), the Window Covering Manufacturers Association (WCMA) has launched the Attachments Energy Ratings Council (AERC).

  4. Cladding Attachment Over Thick Exterior Rigid Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Double Bending Linear (10 Cantilever) Linear (10 Double Bending) Cladding Attachment ... Compression Strut Function of fastener tension and insulation compression Measured ...

  5. An assessment of worldwide supercomputer usage

    SciTech Connect (OSTI)

    Wasserman, H.J.; Simmons, M.L.; Hayes, A.H.

    1995-01-01

    This report provides a comparative study of advanced supercomputing usage in Japan and the United States as of Spring 1994. It is based on the findings of a group of US scientists whose careers have centered on programming, evaluating, and designing high-performance supercomputers for over ten years. The report is a follow-on to an assessment of supercomputing technology in Europe and Japan that was published in 1993. Whereas the previous study focused on supercomputer manufacturing capabilities, the primary focus of the current work was to compare where and how supercomputers are used. Research for this report was conducted through both literature studies and field research in Japan.

  6. DOE Federal Acquisition Regulation Clause Usage Guide

    Broader source: Energy.gov [DOE]

    The subject matrix contained an error related to the solicitation provision at FAR 52.209-5. That provision was identified as Not Applicable for most contract types but it should have identified the provisions as Required for most contract types but Not Applicable for simplified acquisitions and acquisitions of commercial items. A corrected matrix is attached and the matrix in the Stripes Library is being replaced.

  7. 3Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2007. Data for these indicators are gathered by Field...

  8. 4Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "The Facility Representative Program Performance Indicators Quarterly Report is attached, covering the period from October to December 2000. Data for these indicators are gathered by the Field...

  9. 3Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representative Program Indicators (Pis) Quarterly Report attached, covering the period from July to September 2000. Data for these indicators are gathered by the Field elements...

  10. 2Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2005. Data for these indicators are gathered by Field elements...

  11. 3Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2005. Data for these indicators are gathered by Field...

  12. 4Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2005. Data for these indicators are gathered by Field...

  13. 2Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2007. Data for these indicators are gathered by field elements...

  14. 1Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2007. Data for these indicators are gathered by Field elements...

  15. 3Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from July to September 2006. Data for these indicators are gathered by Field...

  16. 4Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from October to December 2006. Data for these indicators are gathered by Field...

  17. 1Q CY2005 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January to March 2005. Data for these indicators are gathered by Field elements...

  18. 4Q CY2007 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    "Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from October to December 2007. Data for these indicators aregathered by Field...

  19. 2Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from April to June 2006. Data for these indicators are gathered by Field elements...

  20. 3Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from July to September 2001. Data for these indicators are gathered by the Field...

  1. 4Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (Pis) Quarterly Report Covering the Period from October to December 2002. Data for these indicators are gathered by Field...

  2. 2Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators QuarterlyReport covering the period from April to June 2008. Data for these indicators aregathered by Field elements...

  3. 1Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from January to March 2001. Data for these indicators are gathered by the Field...

  4. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment K

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    K DE-AC36-08GO28308 Modification M1033 Attachment K Diversity Plan Diversity Plan CY2014 is hereby incorporated as Attachment K of the contract

  5. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment C

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    C DE-AC36-08GO28308 Modification M1033 Attachment C Small Business Subcontracting Plan

  6. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment S

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    S DE-AC36-08GO28308 Modification M1033 Attachment S Human Resources Compensation Plan

  7. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment T

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T DE-AC36-08GO28308 Modification M1033 Attachment T Human Resources Workforce Plan

  8. Microsoft Word - Attachment F1.doc

    Office of Environmental Management (EM)

    F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT F1 Page F1-i ATTACHMENT F1 RCRA HAZARDOUS WASTE MANAGEMENT JOB TITLES AND DESCRIPTIONS TABLE OF CONTENTS Job

  9. Microsoft Word - Attachment B - Reporting Requirements.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DE-SOL-0003339 J.1 ATTACHMENT B - REPORTING REQUIREMENTS REPORTING REQUIREMENTS CHECKLIST 1. AWARDEE: 2. IDENTIFICATION NUMBER: REPORT SUBMISSION: Reports shall be submitted to the electronic addresses indicated in the NETL-identified distribution list provided in the post award debriefing. Electronic copies of each report must be submitted to the Contract Specialist (CS) and Contracting Officer's Representative (COR). 4. PLANNING AND REPORTING REQUIREMENTS FORM NO. FREQ. NO. OF COPIES FORM NO.

  10. Parallel File Systems at HPC Centers: Usage,

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Systems at HPC Centers: Usage, Experiences, and Recommendations William ( Bill) E . A llcock ALCF D irector o f O pera:ons Production Systems: ALCF-2 2 Mira - B G/Q s ystem - 49,152 nodes / 786,432 cores - 786 TB of memory - Peak fl op r ate: 1 0 P F - Linpack fl op r ate: 8 .1 P F Vesta --- B G/Q s ystem - 2,048 nodes / 3 2,768 c ores - 32 TB of memory - Peak fl op r ate: 4 19 T F Cetus --- B G/Q s ystem - 1,024 n odes / 1 6,384 c ores - 16 TB of memory - Peak fl op r ate: 2 09 T F Tukey -

  11. Using Wireless Technology to Reduce Facility Energy Usage | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Using Wireless Technology to Reduce Facility Energy Usage Using Wireless Technology to Reduce Facility Energy Usage This presentation details the U.S. Department of Energy's TEAM initiative's wireless technologies and their applications. Using Wireless Technology to Reduce Facility Energy Usage (December 4, 2009) (2.57 MB) More Documents & Publications New and Emerging Technologies Figure 1: Chamber experiment to study impact of air movement on thermal comfort using personally

  12. Ethanol Usage in Urban Public Transportation - Presentation of...

    Open Energy Info (EERE)

    - Presentation of Results Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Ethanol Usage in Urban Public Transportation - Presentation of Results AgencyCompany...

  13. RECS Electricity Usage Form_v2 (25418 - Activated, Traditional...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    electricity usage for this service address between September 2008 and April 2010. Billing ... Electricity was: BBoth Sold and Delivered SSold Only DDelivered Only (select one) B S D ...

  14. Documentation of INL's In Situ Oil Shale Retorting Water Usage...

    Office of Scientific and Technical Information (OSTI)

    Documentation of INL's In Situ Oil Shale Retorting Water Usage System Dynamics Model Citation Details In-Document Search Title: Documentation of INL's In Situ Oil Shale Retorting ...

  15. Level: National Data; Row: NAICS Codes; Column: Usage within...

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Technologies, 2010; Level: National Data; Row: NAICS Codes; Column: Usage within ... Estimate less than 0.5. WWithheld to avoid disclosing data for individual establishments. ...

  16. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Not Available

    1980-09-17

    A reusable system is described for removably attaching a nuclear reactor fuel rod to a support member. A locking cap is secured to the fuel rod and a locking strip is fastened to the support member. The locking cap has two opposing fingers shaped to form a socket having a body portion. The locking strip has an extension shaped to rigidly attach to the socket's body portion. The locking cap's fingers are resiliently deflectable. For attachment, the locking cap is longitudinally pushed onto the locking strip causing the extension to temporarily deflect open the fingers to engage the socket's body portion. For removal, the process is reversed.

  17. "Table HC4.7 Air-Conditioning Usage Indicators by Renter-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Insulation",0.3,"Q","Q","N","Q","Q","N" "Don't Know",0.9,0.7,"Q","Q","Q","Q","N" "Home Is ... of the Time",2.2,0.9,0.2,"Q","Q",0.4,"Q" "Don't Know",2.2,1.2,"Q","Q","Q",0.6,"Q" ...

  18. "Table HC7.5 Space Heating Usage Indicators by Household Income...

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ... for 2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ...

  19. "Table HC7.12 Home Electronics Usage Indicators by Household...

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ... for 2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ...

  20. "Table HC7.10 Home Appliances Usage Indicators by Household...

    U.S. Energy Information Administration (EIA) Indexed Site

    ,,"2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ... for 2005 Household Income",,,,,"Below Poverty Line","Eligible for Federal Assistance1" ...

  1. "Table HC12.7 Air-Conditioning Usage Indicators by Midwest Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,1.7,1,0.7 ... "At Home Behavior" "Home Used for Business" "Yes",7,13.5,19.2,18 ...

  2. "Table HC13.7 Air-Conditioning Usage Indicators by South Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,2.8,1.8,0.4,0.6 ... "At Home Behavior" "Home Used for Business" "Yes",7,11.7,14.3,32.6,26.4 ...

  3. "Table HC14.7 Air-Conditioning Usage Indicators by West Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,1.4,0.6,0.8 ... "At Home Behavior" "Home Used for Business" "Yes",7,13.1,22.1,15.7 ...

  4. "Table HC15.7 Air-Conditioning Usage Indicators by Four Most...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,"Q",0.7,0.4,0.6 ... "At Home Behavior" "Home Used for Business" "Yes",7,41.2,20.2,26,21 ...

  5. "Table HC10.7 Air-Conditioning Usage Indicators by U.S. Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,0.6,1.7,2.8,1.4 ... "At Home Behavior" "Home Used for Business" "Yes",7,21.4,13.5,11.7,13.1 ...

  6. "Table HC11.7 Air-Conditioning Usage Indicators by Northeast...

    U.S. Energy Information Administration (EIA) Indexed Site

    "At Home Behavior" "Home Used for Business" "Yes",6.4,0.6,0.5,"Q" ... "At Home Behavior" "Home Used for Business" "Yes",7,21.4,24,46.1 ...

  7. "Table HC14.12 Home Electronics Usage Indicators by West Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,6.4,2.2,4.2 "Use a Personal Computer",75.6,17.8,5.3,12.5 "Most-Used Personal Computer" "Type of PC" ...

  8. "Table HC9.12 Home Electronics Usage Indicators by Climate Zone...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,3.2,8.3,8.9,7.7,7.5 "Use a Personal Computer",75.6,7.8,17.8,18.4,16.3,15.3 "Most-Used Personal Computer" ...

  9. "Table HC10.12 Home Electronics Usage Indicators by U.S. Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,6.9,8.1,14.2,6.4 "Use a Personal Computer",75.6,13.7,17.5,26.6,17.8 "Most-Used Personal Computer" "Type ...

  10. "Table HC8.12 Home Electronics Usage Indicators by Urban/Rural...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,16.9,6.5,4.6,7.6 "Use a Personal Computer",75.6,30.3,12.5,18.1,14.7 "Most-Used Personal Computer" "Type ...

  11. "Table HC15.12 Home Electronics Usage Indicators by Four Most...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,3,2,2.7,3.1 "Use a Personal Computer",75.6,4.2,5,5.3,9 "Most-Used Personal Computer" "Type of PC" ...

  12. "Table HC12.12 Home Electronics Usage Indicators by Midwest...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,8.1,5.6,2.5 "Use a Personal Computer",75.6,17.5,12.1,5.4 "Most-Used Personal Computer" "Type of PC" ...

  13. "Table HC3.12 Home Electronics Usage Indicators by Owner-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,20.3,14.8,1.2,0.6,0.9,2.8 "Use a Personal Computer",75.6,57.8,49.2,2.9,1.2,1.4,3 "Most-Used Personal ...

  14. "Table HC11.12 Home Electronics Usage Indicators by Northeast...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,6.9,5.3,1.6 "Use a Personal Computer",75.6,13.7,9.8,3.9 "Most-Used Personal Computer" "Type of PC" ...

  15. "Table HC4.12 Home Electronics Usage Indicators by Renter-Occupied...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,15.3,3,1.9,3.1,6.4,0.8 "Use a Personal Computer",75.6,17.7,5,1.6,2.8,8,0.4 "Most-Used Personal Computer" ...

  16. "Table HC13.12 Home Electronics Usage Indicators by South Census...

    U.S. Energy Information Administration (EIA) Indexed Site

    "Personal Computers" "Do Not Use a Personal Computer",35.5,14.2,7.2,2.8,4.2 "Use a Personal Computer",75.6,26.6,14.5,4.1,7.9 "Most-Used Personal Computer" "Type ...

  17. Table HC15.7 Air-Conditioning Usage Indicators by Four Most...

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Type of Glass in Windows Single-pane Glass......Q N N N Q Proportion of Windows Replaced All......

  18. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT Site: Federal or Contractor Program: Name: ____________________________________________ Title:______________________________________________ Organization:_______________________________________ Address: __________________________________________ Bldg and Room Number _____________________________ Phone Number __________________ E-Mail ________________________________ Years of Records Management experience? Length of time in current position? Training?

  19. EXHIBIT G7.0 Attachment 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    G7.0 Attachment 2 32014 Page 1 SUBCONTRACTOR CYBER SECURITY PLAN Vendor Name (if Applicable): Subcontract No. PR- Ex. G dated: XXXXXX Rev. No.: 7 Pursuant to the requirements in...

  20. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8...

  1. River Corridor Closure Contract Section J, Attachment...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-12 GOVERNMENT-FURNISHED SERVICES AND INFORMATION (GFSI) GFSI Item Scope Description GFSI Description C.4 Hanford Site...

  2. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports ...

  3. Microsoft Word - Attachment G1.doc

    Office of Environmental Management (EM)

    DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM Adapted from DOE/WIPP 96-2150 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G1 Page G1-i ATTACHMENT G1 DETAILED DESIGN REPORT FOR AN OPERATION PHASE PANEL CLOSURE SYSTEM TABLE OF CONTENTS Executive Summary

  4. Microsoft Word - Attachment J.doc

    Office of Environmental Management (EM)

    UNIT TABLES Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit April 15, 2011 PERMIT ATTACHMENT J Page J-i ATTACHMENT J HAZARDOUS WASTE MANAGEMENT UNIT TABLES LIST OF TABLES Table Title Table J-1 Waste Handling Building (WHB) Container Storage Unit Table J-2 Parking Area Container Storage Unit Table J-3 Underground Hazardous Waste Disposal Units Waste Isolation Pilot Plant Hazardous Waste Permit

  5. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1997-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  6. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, James M.; Luna, Daniel A.; Gwinn, Kenneth W.

    1998-01-01

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening.

  7. Microsoft Word - Policy Flash 2010-81 Attachment 2 | Department...

    Office of Environmental Management (EM)

    81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 Microsoft Word - Policy Flash 2010-81 Attachment 2 More Documents & Publications ATTACHMENTFLASH2010.81(2)-OPAM...

  8. Microsoft Word - Policy Flash 2011-2 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 Microsoft Word - Policy Flash 2011-2 Attachment 1 More Documents & Publications...

  9. Microsoft Word - Policy Flash 2010-81 Attachment 1 | Department...

    Energy Savers [EERE]

    Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 Microsoft Word - Policy Flash 2010-81 Attachment 1 More Documents &...

  10. Microsoft Word - Policy Flash 2010-67 Attachment 1 | Department...

    Office of Environmental Management (EM)

    67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 Microsoft Word - Policy Flash 2010-67 Attachment 1 More Documents & Publications Acquisition Letter 2009-03...

  11. Attachment C - Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL Attachment C - Summary GHG Emissions Data FINAL (33.78 KB) More Documents & Publications Attachment C

  12. Attachment C Summary GHG Emissions Data FINAL | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Summary GHG Emissions Data FINAL Attachment C Summary GHG Emissions Data FINAL Attachment-C-Summary-GHG-Emissions-Data-FINAL.xlsx (34.24 KB) More Documents & Publications Attachment C -

  13. Attachment FY2011-83 OPAM | Department of Energy

    Office of Environmental Management (EM)

    3 OPAM Attachment FY2011-83 OPAM Federal Supply Schedules Attachment FY2011-83 OPAM More Documents & Publications Chapter 8 - Required Sources of Supplies and Services Attachment...

  14. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment M

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    M DE-AC36-08GO28308 Modification M1033 Attachment M Equal Opportunity Program Incorporated by Reference In Modification M004

  15. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment N

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    N DE-AC36-08GO28308 Modification M1033 Attachment N Supplemental Requirements To Laws, Regulations, And Doe Directives

  16. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachments H

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H DE-AC36-08GO28308 Modification M1033 Attachment H Performance Guarantee Agreement Incorporated by Reference In Modification M004

  17. Apparatus for attaching a cleaning tool to a robotic manipulator...

    Office of Scientific and Technical Information (OSTI)

    Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator This invention is comprised of an apparatus ...

  18. Apparatus for attaching a cleaning tool to a robotic manipulator...

    Office of Scientific and Technical Information (OSTI)

    Apparatus for attaching a cleaning tool to a robotic manipulator Title: Apparatus for attaching a cleaning tool to a robotic manipulator You are accessing a document from the ...

  19. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Energy Savers [EERE]

    Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart...

  20. Attachment 2: Solicitation for Offers with New and Revised Green...

    Energy Savers [EERE]

    Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text PDF icon Solicitation for...

  1. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Energy Savers [EERE]

    Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition PDF icon Green Lease Policies and...

  2. Collimator with attachment mechanism and system (Patent) | DOEPatents

    Office of Scientific and Technical Information (OSTI)

    Data Explorer Search Results Collimator with attachment mechanism and system Title: Collimator with attachment mechanism and system A self-aligning collimator for a radiation ...

  3. Property:NEPA ApplicationAttachments | Open Energy Information

    Open Energy Info (EERE)

    ApplicationAttachments Jump to: navigation, search Property Name NEPA ApplicationAttachments Property Type Page Description FONSI files for NEPA Docs. For example: Cover letters,...

  4. Relative concordance of human immunodeficiency virus oligomeric and monomeric envelope in CCR5 coreceptor usage

    SciTech Connect (OSTI)

    Teeravechyan, Samaporn; Suphaphiphat, Pirada; Essex, Max; Lee, Tun-Hou

    2008-01-20

    A major difference between binding and fusion assays commonly used to study the human immunodeficiency virus (HIV) envelope is the use of monomeric envelope for the former assay and oligomeric envelope for the latter. Due to discrepancies in their readouts for some mutants, envelope regions involved in CCR5 coreceptor usage were systematically studied to determine whether the discordance is due to inherent differences between the two assays or whether it genuinely reflects functional differences at each entry step. By adding the binding inhibitor TAK-779 to delay coreceptor binding kinetics in the fusion assay, the readouts were found comparable between the assays for the mutants analysed in this study. Our finding indicates that monomeric binding reflects oligomeric envelope-CCR5 interaction, thus discordant results between binding and fusion assays do not necessarily indicate differences in coreceptor usage by oligomeric envelope and monomeric gp120.

  5. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment J

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    J DE-AC36-08GO28308 Modification M1033 Attachment J Performance Evaluation And Measurement Plan FY 2015 Performance Evaluation And Measurement Plan dated May 11, 2015, Rev 4, is hereby incorporated into this contract by reference as Section J, Attachment J

  6. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment L

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    L DE-AC36-08GO28308 Modification M1033 Attachment L Employee Concerns Program (ECP) Implementation Plan The Employee Concerns Program Plan, dated January 22, 2015, is hereby incorporated into this contract by reference as Section J, Attachment L

  7. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment P

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    P DE-AC36-08GO28308 Modification M1033 Attachment P Five Year Strategic Plan NREL's Five-Year Plan (FY15-FY19), dated October 23, 2014, Rev 2, is hereby incorporated into this contract by reference as Section J, Attachment P

  8. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment Q

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Q DE-AC36-08GO28308 Modification M1033 Attachment Q Organizational Conflict Of Interest Management Plan Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment Q

  9. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment R

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    R DE-AC36-08GO28308 Modification M1033 Attachment R Organizational Conflict Of Interest Implementation Program Organizational Conflicts of Interest Management Plan and Implementation Program, Volumes I and II, dated October 6, 2014, are hereby incorporated into this contract by reference as Section J, Attachment R

  10. Nuclear reactor fuel rod attachment system

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA)

    1982-01-01

    A reusable system for removably attaching a nuclear reactor fuel rod (12) to a support member (14). A locking cap (22) is secured to the fuel rod (12) and a locking strip (24) is fastened to the support member (14). The locking cap (22) has two opposing fingers (24a and 24b) shaped to form a socket having a body portion (26). The locking strip has an extension (36) shaped to rigidly attach to the socket's body portion (26). The locking cap's fingers are resiliently deflectable. For attachment, the locking cap (22) is longitudinally pushed onto the locking strip (24) causing the extension (36) to temporarily deflect open the fingers (24a and 24b) to engage the socket's body portion (26). For removal, the process is reversed.

  11. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1997-11-18

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  12. Attachment device for an inflatable protective cushion

    DOE Patents [OSTI]

    Nelsen, J.M.; Luna, D.A.; Gwinn, K.W.

    1998-12-08

    An inflatable cushion assembly for use with an inflator comprises an inflatable cushion having an inner surface, outer surface, and at least one protrusion extending from one of the inner or outer surfaces. The inflatable cushion defines an opening between the inner surface and the outer surface for receiving the inflator. An attachment member contacts the one of the inner or outer surfaces adjacent the opening and includes a groove for receiving the protrusion, the attachment member securing the inflator within the opening. 22 figs.

  13. Jefferson Lab's Education Web Site Hits New High-Usage Record...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Site Hits New High-Usage Record Jefferson Lab's Education Web Site Hits New High-Usage Record April 22, 2002 Jefferson Lab's Science Education web site hit a new high in usage ...

  14. Documentation of INL's In Situ Oil Shale Retorting Water Usage...

    Office of Scientific and Technical Information (OSTI)

    Documentation of INL's In Situ Oil Shale Retorting Water Usage System Dynamics Model Earl D Mattson; Larry Hull 02 PETROLEUM water water A system dynamic model was construction to...

  15. Annual Report Outline (IDIQ Attachment J-10) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Report Outline (IDIQ Attachment J-10) Annual Report Outline (IDIQ Attachment J-10) Document offers an annual report outline sample for an energy savings performance contract. Download the annual report outline. (48.62 KB) More Documents & Publications Post-Installation Report Outline (IDIQ Attachment J-9) Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) ESPC Task Order Financial Schedules (IDIQ Attachment J-6

  16. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment G

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    G DE-AC36-08GO28308 Modification M1033 Attachment G Sensitive Foreign Nations Control In accordance with the Clause I.92, Sensitive Foreign Nations Controls, this Attachment sets forth the requirements the contractor shall comply with under this contract. (Reference DOE Order 142.3, or superseding directives.) Foreign National access to DOE sites, programs, information and technologies will be approved provided the access is needed to support the program objectives of DOE and/or objectives of

  17. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment I

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I DE-AC36-08GO28308 Modification M1033 Attachment I Subcontracts, Purchase Orders And Other Actions Requiring DOE Review And Approval And Other Agreements Between The Parties This Attachment, implementing the Article entitled Contractor Purchasing System, sets forth the requirements for DOE's approval under the prime contract for the operation of the National Renewable Energy Laboratory. Subcontracts not binding on DOE Subcontracts and purchase orders shall be made in the name of Alliance, shall

  18. Methods of attaching erosion-resistant nonmetallic panels

    SciTech Connect (OSTI)

    Girzhel, A.M.

    1984-01-01

    Attachment methods for panels of wear-resistant nonmetallic materials, e.g. cast stone and slag, devitrified slag, and erosion-resistant and heat-resistant concretes to protect hopper, chute, and trough structures at metallurgical and coal industries have been investigated. Attachment methods can be divided into two groups, attachment by adhesives and by mechanical attachment. A new method of mechanical attachment, considered to be much superior to adhesive attachment, provides for reliable fastening without damage to the protected metal structure. Various panel designs may be used depending on the operating conditions.

  19. EECBG SEP Attachment 1 - Process metric list

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10-07B/SEP 10-006A Attachment 1: Process Metrics List Metric Area Metric Primary or Optional Metric Item(s) to Report On 1. Building Retrofits 1a. Buildings retrofitted, by sector Number of buildings retrofitted Square footage of buildings retrofitted 1b. Energy management systems installed, by sector Number of energy management systems installed Square footage of buildings under management 1c. Building roofs retrofitted, by sector Number of building roofs retrofitted Square footage of building

  20. Attachment FY2011-55 OPAM

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1, Summary of Small Business Administration and Department of Energy Partnership Agreement Reference: FAR 19.8 Overview Recently, the Secretary and the Administrator of the Small Business Administration (SBA) executed a Partnership Agreement to expedite the award of requirements pursuant to section 8(a) of the Small Business Act. It will remain in effect through September 30, 2012. A copy is attached. This section discusses the effects of that Partnership Agreement on the way Department of

  1. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1.What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2.Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3.What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  2. Cladding Attachment Over Thick Exterior Insulating Sheathing

    SciTech Connect (OSTI)

    Baker, P.; Eng, P.; Lepage, R.

    2014-01-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location (Straube and Smegal 2009, Pettit 2009, Joyce 2009, Ueno 2010). The research presented in this report is intended to help develop a better understanding of the system mechanics involved and the potential for environmental exposure induced movement between the furring strip and the framing. BSC sought to address the following research questions: 1. What are the relative roles of the mechanisms and the magnitudes of the force that influence the vertical displacement resistance of the system? 2. Can the capacity at a specified deflection be reliably calculated using mechanics based equations? 3. What are the impacts of environmental exposure on the vertical displacement of furring strips attached directly through insulation back to a wood structure?

  3. Commercial Building Tenant Energy Usage Aggregation and Privacy

    SciTech Connect (OSTI)

    Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.; Wang, Na

    2014-10-31

    A growing number of building owners are benchmarking their building energy use. This requires the building owner to acquire monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer energy use data (CEUD) as a way to give building owners whole-building energy usage data while protecting customer privacy. Meter profile aggregation adds a layer of protection that decreases the risk of revealing CEUD as the number of meters aggregated increases. The report statistically characterizes the similarity between individual energy usage patterns and whole-building totals at various levels of meter aggregation.

  4. Mining Software Usage with the Automatic Library Tracking Database (ALTD)

    SciTech Connect (OSTI)

    Hadri, Bilel; Fahey, Mark R

    2013-01-01

    Tracking software usage is important for HPC centers, computer vendors, code developers and funding agencies to provide more efficient and targeted software support, and to forecast needs and guide HPC software effort towards the Exascale era. However, accurately tracking software usage on HPC systems has been a challenging task. In this paper, we present a tool called Automatic Library Tracking Database (ALTD) that has been developed and put in production on several Cray systems. The ALTD infrastructure prototype automatically and transparently stores information about libraries linked into an application at compilation time and also the executables launched in a batch job. We will illustrate the usage of libraries, compilers and third party software applications on a system managed by the National Institute for Computational Sciences.

  5. Triboluminescent tamper-indicating device

    DOE Patents [OSTI]

    Johnston, Roger G.; Garcia, Anthony R. E.

    2002-01-01

    A tamper-indicating device is described. The device has a transparent or translucent cylindrical body that includes triboluminescent material, and an outer opaque layer that prevents ambient light from entering. A chamber in the body holds an undeveloped piece of photographic film bearing an image. The device is assembled from two body members. One of the body members includes a recess for storing film and an optical assembly that can be adjusted to prevent light from passing through the assembly and exposing the film. To use the device with a hasp, the body members are positioned on opposite sides of a hasp, inserted through the hasp, and attached. The optical assembly is then manipulated to allow any light generated from the triboluminescent materials during a tampering activity that damages the device to reach the film and destroy the image on the film.

  6. Attachment FY2011-06 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    SUMMARY OF PUBLIC LAW 111-240, THE SMALL BUSINESS JOBS ACT OF 2010 Attachment FY2011-06 OPAM More Documents & Publications Attachment FY2011-28 OPAM Chapter 19 - Small Business...

  7. Attachment FY2011-9 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment FY2011-9 Attachment FY2011-9 FFRDC Determination for a Contract Competition More Documents & Publications Policy Flash 2013-30 Acquisition Letter on Acquisition Planning...

  8. Attachment FY2011-12 | Department of Energy

    Office of Environmental Management (EM)

    2 Attachment FY2011-12 Indirect Cost Rate Administration Attachment FY2011-12 More Documents & Publications AcqGuide42pt1.doc&0; Acquisition Letter No. AL 2008-02 Department of...

  9. Dual-shank attachment design for omega seals

    DOE Patents [OSTI]

    Sattinger, Stanley S.

    1978-01-01

    An improved apparatus and process for attaching welded omega seal segments to reactor heads, standpipes, mechanisms, and plugs comprises a first shank in combination with a second shank to attach an omega seal at a metal-to-metal interface.

  10. AttachmentFlash_2010-65.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    65.pdf AttachmentFlash2010-65.pdf PDF icon AttachmentFlash2010-65.pdf More Documents & Publications fac2001-26.pdf DOELabor Leadership Roundtable Meeting Generic copy of DOE's...

  11. Scintillation probe with photomultiplier tube saturation indicator

    DOE Patents [OSTI]

    Ruch, Jeffrey F.; Urban, David J.

    1996-01-01

    A photomultiplier tube saturation indicator is formed by supplying a supplemental light source, typically an light emitting diode (LED), adjacent to the photomultiplier tube. A switch allows the light source to be activated. The light is forwarded to the photomultiplier tube by an optical fiber. If the probe is properly light tight, then a meter attached to the indicator will register the light from the LED. If the probe is no longer light tight, and the saturation indicator is saturated, no signal will be registered when the LED is activated.

  12. 1997 RECS data on consumer usage of appliances

    SciTech Connect (OSTI)

    Latta, R.B.

    1998-07-01

    The 1997 Residential Energy Consumption Survey (RECS) conducted by the Energy Information Administration contained questions on how households use various appliances. This includes the following appliance usage (1) personnel computers, (2) cooking appliances, (3) conventional ovens, (4) microwave ovens, (5) clothes washers, and (6) clothes dryer. Many of these items were first collected in the 1997 RECS. In this paper, appliance usage by household demographic characteristics (household income, age of householder, and number of household members) are examined with an emphasis on results for data items that were first collected in the 1997 RECS.

  13. EECBG SEP Attachment 1 - Process metric list | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEP Attachment 1 - Process metric list EECBG SEP Attachment 1 - Process metric list Reporting Guidance Process Metric List eecbg_10_07b_sep__10_006a_attachment1_process_metric_list.pdf (93.56 KB) More Documents & Publications EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  14. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME Note: Addremove extra rows if needed...

  15. Standard Financing Offer Template (IDIQ Attachment J-12) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Standard Financing Offer Template (IDIQ Attachment J-12) Standard Financing Offer Template (IDIQ Attachment J-12) Document features a template to help communicate a finance offer as part of an energy savings performance contract. Download the standard financing offer template. (30.52 KB) More Documents & Publications Investor Deal Summary Template (IDIQ Attachment J-11) ESPC Task Order Financial Schedules (IDIQ Attachment J-6) Descriptions of ESPC Task Order Schedules and

  16. Cable attachment for a radioactive brachytherapy source capsule

    DOE Patents [OSTI]

    Gross, Ian G; Pierce, Larry A

    2006-07-18

    In cancer brachytherapy treatment, a small californium-252 neutron source capsule is attached to a guide cable using a modified crimping technique. The guide cable has a solid cylindrical end, and the attachment employs circumferential grooves micromachined in the solid cable end. The attachment was designed and tested, and hardware fabricated for use inside a radioactive hot cell. A welding step typically required in other cable attachments is avoided.

  17. Attachment 3.a. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ......... 3 A.7. Billing & Payment ......of the requesting agency and servicing agency. A.7. Billing & Payment Attachment 3.a. ...

  18. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; De Yoreo, James J.; Kwon, Youngeun

    2010-04-20

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  19. ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT ATTACHMENT A - CHECKLIST FOR SELF ASSESSMENT (302.66 KB) More Documents & Publications Assessment B - Program Criteria Assessment C-Site Visit Protocol DOE O 243.1B, Records Management Program

  20. Attachment 4: Unrevised SFO Paragraphs Reissued | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    4: Unrevised SFO Paragraphs Reissued Attachment 4: Unrevised SFO Paragraphs Reissued Unrevised SFO Paragraphs Reissued (35.68 KB) More Documents & Publications Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 1: Green Lease Policies and Procedures for Lease Acquisition 1

  1. AL2000-10Attach.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AL2000-10Attach.pdf AL2000-10Attach.pdf PDF icon AL2000-10Attach.pdf More Documents & Publications AL2000-10R.pdf AL2004-01r2.pdf Consent Order, Fluor Federal Services - EA-2000-10...

  2. Photoswitchable method for the ordered attachment of proteins to surfaces

    DOE Patents [OSTI]

    Camarero, Julio A.; DeYoreo, James J.; Kwon, Youngeun

    2011-07-05

    Described herein is a method for the attachment of proteins to any solid support with control over the orientation of the attachment. The method is extremely efficient, not requiring the previous purification of the protein to be attached, and can be activated by UV-light. Spatially addressable arrays of multiple protein components can be generated by using standard photolithographic techniques.

  3. Microsoft Word - Attachment coversheet.docx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    HANFORD MISSION SUPPORT CONTRACT ADVANCE UNDERSTANDING ON COST REVISED DECEMBER 31, 2014 Mission Support Contract Contract Number DE-AC06-09RL14728 Attachment J, Section J.8 Modification 479 ii CHANGE HISTORY Version Date Change Author Change Summary 6.0 December 31, 2014 Ricky Churchman Updated to incorporate: Retention as a part of the Hiring/Signing bonuses 5.1 August 26, 2014 Ricky Churchman Updated to incorporate: Use of Government/Contractor Leased Vehicles for Offsite Transportation 5.0

  4. Appendix DATA Attachment A: WIPP Borehole Update

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A: WIPP Borehole Update United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment A: WIPP Borehole Update Table of Contents DATA-A-1.0 WIPP Boreholes DATA-A-2.0 Individual Well Reports DATA-A-2.1 New Wells Drilled Since the CRA-2009 DATA-A-2.2 Plugged Wells DATA-A-3.0 References List of Tables Table DATA-A- 1. Status of WIPP Boreholes December 2012 WIPP Table DATA-A-1. Status of WIPP Boreholes December 2012 WIPP

  5. Microsoft Word - ATTACHMENT A Suppl 5.doc

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ATTACHMENT A: Modeling in Support of Additional Two-Unit Operating Configurations Unit 1 & Unit 2 Operation - SO2 Table Mirant Potomac, Alexandria, Virginia Maximum Impacts Predicted by AERMOD-PRIME Compliance Based on Highest, Second-Highest Short-term and Highest Annual Concentrations Units 1 & 2 on 24 hrs/day @ Max load SO2 = 0.31 lb/MBtu for both units. AERMOD- PRIME Monitored Background AERMOD-PRIME + Background NAAQS Distance Direction Ground Elevation Flagpole Elevation X (m) Y

  6. Fuel bundle design for enhanced usage of plutonium fuel

    DOE Patents [OSTI]

    Reese, Anthony P.; Stachowski, Russell E.

    1995-01-01

    A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced.

  7. 2Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from April to June  2009. Data for these indicators are gathered by Field elements...

  8. 2Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from April 2000 to June 2000. Data for these indicators are gathered by the Field...

  9. 1Q CY2010 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March2010. Data for these indicators are gathered by Field...

  10. 4Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from October to December  2004. Data for these indicators are gathered by Field...

  11. 1Q CY2006 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Office of Energy Efficiency and Renewable Energy (EERE)

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report covering the period from January  to March 2006. Data for these indicators are gathered by Field...

  12. 2Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from April to June  2004. Data for these indicators are gathered by Field elements...

  13. 4Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from October to December  2003. Data for these indicators are gathered by Field...

  14. 3Q CY2004 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly Report Covering the Period from July to September  2004. Data for these indicators are gathered by Field...

  15. 4Q CY2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from October to December   2008. Data for these indicators are  gathered by Field...

  16. 4Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from October to December  2001. Data for these indicators are gathered by the Field...

  17. 3Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from July  to September  2002. Data for these indicators are gathered by the Field...

  18. 3Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from July to September  2003. Data for these indicators are gathered by Field...

  19. 1Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from January  to March  2002. Data for these indicators are gathered by the Field...

  20. 2Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from April to June  2003. Data for these indicators are gathered by Field elements...

  1. 1Q CY2003 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative Program Performance Indicators (PIs) Quarterly Report Covering the Period from January to March  2003. Data for these indicators are gathered by Field...

  2. 2Q CY2002 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from April  to June 2002. Data for these indicators are gathered by the Field...

  3. 1Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from January to March 2009. Data for these indicators are gathered by Field...

  4. 3Q C&2008 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September   2008. Data for these indicators aregathered by Field...

  5. 3Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from July to September 2009. Data for these indicators are gathered by Field...

  6. 4Q CY2009 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    "Attached is the Facility Representative (FR) Program Performance Indicators Quarterly  Report covering the period from October to December 2009. Data for these indicators are gathered by Field...

  7. 2Q CY2001 (PDF), Facility Representative Program Performance Indicators Quarterly Report

    Broader source: Energy.gov [DOE]

    The Facility Representive Program Performance Indicators (PIs) Quarterly Report is attached covering the period from April to June 2001. Data for these indicators are gathered by the Field elements...

  8. Predicting Envelope Leakage in Attached Dwellings

    SciTech Connect (OSTI)

    Faakye, O.; Arena, L.; Griffiths, D.

    2013-07-01

    The most common method for measuring air leakage is to use a single blower door to pressurize and/or depressurize the test unit. In detached housing, the test unit is the entire home and the single blower door measures air leakage to the outside. In attached housing, this 'single unit', 'total', or 'solo' test method measures both the air leakage between adjacent units through common surfaces as well air leakage to the outside. Measuring and minimizing this total leakage is recommended to avoid indoor air quality issues between units, reduce energy losses to the outside, reduce pressure differentials between units, and control stack effect. However, two significant limitations of the total leakage measurement in attached housing are: for retrofit work, if total leakage is assumed to be all to the outside, the energy benefits of air sealing can be significantly over predicted; for new construction, the total leakage values may result in failing to meet an energy-based house tightness program criterion. The scope of this research is to investigate an approach for developing a viable simplified algorithm that can be used by contractors to assess energy efficiency program qualification and/or compliance based upon solo test results.

  9. Dissociative attachment of electrons to vibronically excited SO{sub 2}

    SciTech Connect (OSTI)

    Kumar, S.V.K.; Ashoka, V.S.; Krishnakumar, E.

    2004-11-01

    Dissociative electron attachment (DEA) to vibronically excited SO{sub 2} in the Clements' band in the 288 to 298 nm region has been studied. The O{sup -} ion yield, to a first approximation, follows the photo absorption spectrum in this range indicating the DEA process to be independent of the vibrational levels in this band. This is in contrast to what is generally observed for vibrational level dependence from the electronic ground state. The current measurements also do not show any qualitative change in the dissociative attachment process due to change of symmetry as one moves from the peaks to the valleys of the Clements band.

  10. DOE/RL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ATTACHMENTS February 28, 2012 Rev 1 Page 31 ATTACHMENT 2 Lifting Requirements for Concrete Blocks DOERL-92-36, Hanford Site Hoisting and Rigging Manual ATTACHMENTS February 28,...

  11. 1Q CY2000 (PDF), Facility Representative Program Performance Indicators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Quarterly Report | Department of Energy Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report 1Q CY2000 (PDF), Facility Representative Program Performance Indicators Quarterly Report "The Facility Representative Program Performance Indicators (PIs) Quarterly Report is attached, covering the period from January 2000 to March 2000. Data for these indicators are gathered by the Field elements quarterly per the Facility Representatives Standard, DOE-STD-1

  12. Dissociative electron attachment studies on acetone

    SciTech Connect (OSTI)

    Prabhudesai, Vaibhav S. Tadsare, Vishvesh; Ghosh, Sanat; Gope, Krishnendu; Davis, Daly; Krishnakumar, E.

    2014-10-28

    Dissociative electron attachment (DEA) to acetone is studied in terms of the absolute cross section for various fragment channels in the electron energy range of 020 eV. H{sup ?} is found to be the most dominant fragment followed by O{sup ?} and OH{sup ?} with only one resonance peak between 8 and 9 eV. The DEA dynamics is studied by measuring the angular distribution and kinetic energy distribution of fragment anions using Velocity Slice Imaging technique. The kinetic energy and angular distribution of H{sup ?} and O{sup ?} fragments suggest a many body break-up for the lone resonance observed. The ab initio calculations show that electron is captured in the multi-centered anti-bonding molecular orbital which would lead to a many body break-up of the resonance.

  13. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, Edward H.; Tuckerman, David B.

    1991-01-01

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required.

  14. Vacuum die attach for integrated circuits

    DOE Patents [OSTI]

    Schmitt, E.H.; Tuckerman, D.B.

    1991-09-10

    A thin film eutectic bond for attaching an integrated circuit die to a circuit substrate is formed by coating at least one bonding surface on the die and substrate with an alloying metal, assembling the die and substrate under compression loading, and heating the assembly to an alloying temperature in a vacuum. A very thin bond, 10 microns or less, which is substantially void free, is produced. These bonds have high reliability, good heat and electrical conduction, and high temperature tolerance. The bonds are formed in a vacuum chamber, using a positioning and loading fixture to compression load the die, and an IR lamp or other heat source. For bonding a silicon die to a silicon substrate, a gold silicon alloy bond is used. Multiple dies can be bonded simultaneously. No scrubbing is required. 1 figure.

  15. Microsoft Word - Flash2008-09Attachment.doc | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    9Attachment.doc More Documents & Publications Flash2007-02Attachment.doc&0; Microsoft Word - AL2000-05Attachment.doc Flash2007-03Attachment.doc&0;...

  16. Microsoft Word - AL2000-05Attachment.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment.doc Microsoft Word - AL2000-05Attachment.doc PDF icon Microsoft Word - AL2000-05Attachment.doc More Documents & Publications al99-06attachment.doc&0; EXHIBIT A: CRADA,...

  17. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Table of Contents

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    III SECTION J LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS TABLE OF CONTENTS Document Title Page Attachment A Personnel (Appendix A) ......................................................................................... ..3 Attachment B Key Personnel ......................................................................................................... 26 Attachment C Small Business Subcontracting Plan ...................................................................... 27

  18. Microsoft Word - Attachment J-5 Continuity of Operations Plan.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5-1 ATTACHMENT J.5 CONTINUITY OF OPERATIONS

  19. Residential Lighting Usage Estimate Tool, v1.0

    Broader source: Energy.gov [DOE]

    By improving our understanding of residential lighting-energy usage and quantifying it across many different parameters, the new study will be of use to anyone doing energy estimates – such as utilities, market and investment analysts, and government agencies. It will also help manufacturers design products that not only better serve consumers' needs, but that maximize the energy savings that technologies like SSL make possible.

  20. Fuel bundle design for enhanced usage of plutonium fuel

    DOE Patents [OSTI]

    Reese, A.P.; Stachowski, R.E.

    1995-08-08

    A nuclear fuel bundle includes a square array of fuel rods each having a concentration of enriched uranium and plutonium. Each rod of an interior array of the rods also has a concentration of gadolinium. The interior array of rods is surrounded by an exterior array of rods void of gadolinium. By this design, usage of plutonium in the nuclear reactor is enhanced. 10 figs.

  1. Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics...

    Office of Scientific and Technical Information (OSTI)

    Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics Model Citation Details In-Document Search Title: Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics ...

  2. Residential Lighting Usage Estimate Tool, v1.0, Windows version...

    Energy Savers [EERE]

    Windows version Residential Lighting Usage Estimate Tool, v1.0, Windows version Windows version of the Residential Lighting Usage Estimate Tool, v1.0. Spreadsheet More Documents &...

  3. Residential Lighting Usage Estimate Tool, v1.0, MacOS version...

    Energy Savers [EERE]

    MacOS version Residential Lighting Usage Estimate Tool, v1.0, MacOS version MacOS version of the Residential Lighting Usage Estimate Tool, v1.0. Spreadsheet More Documents &...

  4. RECS Fuel Oil Usage Form_v1 (Draft).xps

    U.S. Energy Information Administration (EIA) Indexed Site

    fuel oil usage for this delivery address between September 2008 and April 2010. Delivery ... Form EIA 457G OMB No. 1905-0092 Expires 13113 2009 RECS Fuel Oil and Kerosene Usage Form ...

  5. Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics...

    Office of Scientific and Technical Information (OSTI)

    Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics Model Citation Details In-Document Search Title: Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics Model ...

  6. Jefferson Lab's Education web site hits new high-usage record...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    web site hits new high-usage record during 2003 SOL season Jefferson Lab's Education web site hits new high-usage record during 2003 SOL season April 2, 2003 Jefferson Lab's ...

  7. Red Storm usage model :Version 1.12.

    SciTech Connect (OSTI)

    Jefferson, Karen L.; Sturtevant, Judith E.

    2005-12-01

    Red Storm is an Advanced Simulation and Computing (ASC) funded massively parallel supercomputer located at Sandia National Laboratories (SNL). The Red Storm Usage Model (RSUM) documents the capabilities and the environment provided for the FY05 Tri-Lab Level II Limited Availability Red Storm User Environment Milestone and the FY05 SNL Level II Limited Availability Red Storm Platform Milestone. This document describes specific capabilities, tools, and procedures to support both local and remote users. The model is focused on the needs of the ASC user working in the secure computing environments at Los Alamos National Laboratory (LANL), Lawrence Livermore National Laboratory (LLNL), and SNL. Additionally, the Red Storm Usage Model maps the provided capabilities to the Tri-Lab ASC Computing Environment (ACE) requirements. The ACE requirements reflect the high performance computing requirements for the ASC community and have been updated in FY05 to reflect the community's needs. For each section of the RSUM, Appendix I maps the ACE requirements to the Limited Availability User Environment capabilities and includes a description of ACE requirements met and those requirements that are not met in that particular section. The Red Storm Usage Model, along with the ACE mappings, has been issued and vetted throughout the Tri-Lab community.

  8. Investor Deal Summary Template (IDIQ Attachment J-11) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Investor Deal Summary Template (IDIQ Attachment J-11) Investor Deal Summary Template (IDIQ Attachment J-11) Document features a template for summarizing an investor or energy service company's deal as part of an energy savings performance contract. Download the Investor Deal Summary Template. (39.05 KB) More Documents & Publications ESPC Task Order Financial Schedules (IDIQ Attachment J-6) ESPC ENABLE Final Proposal Requirements Model Energy Savings Performance Contract,

  9. Certification and Rating of Attachments for Fenestration Technologies

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (DE-FOA-0001000) | Department of Energy Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) Certification and Rating of Attachments for Fenestration Technologies (DE-FOA-0001000) November 5, 2013 - 4:43pm Addthis This funding opportunity is closed Through this Funding Opportunity Announcement (FOA) the Building Technologies Office (BTO) seeks to establish a performance rating mechanism for assessing the energy performance of fenestration attachments. DOE

  10. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment E

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    E DE-AC36-08GO28308 Modification M1033 Attachment E Applicable Laws and Regulations (List A) Necessary and Sufficient Environmental, Safety and Health Standards CODE OF FEDERAL REGULATIONS (CFR) 7 CFR 340-Biotechnology Permits 10 CFR 8.4 - Interpretation by the General Counsel: AEC Jurisdiction 10 CFR 707 Workplace Substance Abuse Programs at DOE Sites 10 CFR 719 - Contractor Legal Management Requirements 10 CFR 835 - Occupational Radiation Protection 10 CFR 851 - Worker Safety and Health

  11. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment F

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F DE-AC36-08GO28308 Modification M1033 Attachment F Operating and Administrative Requirements (List B) Prime Contract No. DE-AC36-08GO28308 The operating and administrative requirements, including the Contractor Requirements Documents of DOE directives listed below are applicable in whole or in part in accordance with clauses H-18 Application of DOE Contractor Requirements Documents and 970.5204-2, Laws, Regulations, and DOE Directives (DEC 2000). The concurrence analysis documenting

  12. SECTION L -ATTACHMENT B - LISTING OF KEY PERSONNEL

    National Nuclear Security Administration (NNSA)

    B, Page 1 SECTION L ATTACHMENT B LISTING OF KEY PERSONNEL TITLE NAME [Note: Add/remove extra rows if needed]

  13. Building America Case Study:Cladding Attachment Over Mineral...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Mineral Fiber Insulation Board Ontario, Canada PROJECT INFORMATION Project Name: Climate-Exposed Long- Term Testing of Mineral Fiber Insulation Board Under ...

  14. Building America Expert Meeting: Cladding Attachment Over Exterior Insulation

    Broader source: Energy.gov [DOE]

    This expert meeting was conducted by Building Science Corporation on July 28, 2012 and focused on issues surrounding cladding attachment and performance of walls with exterior insulating sheathing.

  15. Attachment 3 b. Part A Page 1 of 6

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment 3 b. Part A Page 1 of 6 Section A - General Terms and Conditions ................................................................................................ 2 A.1. Purpose .................................................................................................................................................. 2 A.2. Authority ............................................................................................................................................... 2

  16. Microsoft Word - Attachment G1H.doc

    Office of Environmental Management (EM)

    APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW ... ATTACHMENT G1 APPENDIX H DESIGN DRAWINGS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT ...

  17. Microsoft Word - Policy Flash 2010-82 Attachment 1 | Department...

    Broader source: Energy.gov (indexed) [DOE]

    2 Attachment 1 More Documents & Publications Policy Flash 2010-82 Microsoft Word - Policy Flash 2008-07.doc Microsoft Word - Policy Flash 2008-10.doc...

  18. FLASH2003-12attachment.pdf | Department of Energy

    Office of Environmental Management (EM)

    FLASH2003-12attachment.pdf More Documents & Publications Flash2004-19.pdf Document DOE Princeton Plasma Physics Laboratory Purchase Power Agreement Request for Proposal...

  19. Nevada Test Site Environmental Report Attachment A: Site Description

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nevada Test Site Environmental Report Attachment A: Site Description DOENV25946--790-ATT A Nevada Test Site Environmental Report 2008 Disclaimer Reference herein to any specific ...

  20. Vacuum Attachment for Collection of Lithium Powder ---- Inventor...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of Lithium Powder ---- Inventor(s) Hans Schneider and Stephan Jurczynski The Vacuum Attachment is part of an integrated system designed to collect Lithium (Li) Power for ...

  1. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement ...

  2. Attachment 2: Solicitation for Offers with New and Revised Green...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Solicitation for Offers Paragraphs with ...

  3. Attachment 3: Instructions for Use of Green Lease Solicitation...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) ...

  4. Attachment 1: Green Lease Policies and Procedures for Lease Acquisitio...

    Broader source: Energy.gov (indexed) [DOE]

    Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - ...

  5. Thermal indicator for wells

    DOE Patents [OSTI]

    Gaven, Jr., Joseph V.; Bak, Chan S.

    1983-01-01

    Minute durable plate-like thermal indicators are employed for precision measuring static and dynamic temperatures of well drilling fluids. The indicators are small enough and sufficiently durable to be circulated in the well with drilling fluids during the drilling operation. The indicators include a heat resistant indicating layer, a coacting meltable solid component and a retainer body which serves to unitize each indicator and which may carry permanent indicator identifying indicia. The indicators are recovered from the drilling fluid at ground level by known techniques.

  6. Dissociative electron attachments to ethanol and acetaldehyde...

    Office of Scientific and Technical Information (OSTI)

    3sup - are recorded, indicating the low kinetic energies of Osup -OHsup - for ethanol while the low and high kinetic energy distributions of Osup - ions for acetaldehyde. ...

  7. Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Reference Chart | Department of Energy 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart Attachment 3: Instructions for Use of Green Lease Solicitation Paragraph Reference Chart (1.84 MB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Microsoft Word - AL2008-05.doc

  8. A PRACTICAL ONTOLOGY FOR THE LARGE-SCALE MODELING OF SCHOLARLY ARTIFACTS AND THEIR USAGE

    SciTech Connect (OSTI)

    RODRIGUEZ, MARKO A.; BOLLEN, JOHAN; VAN DE SOMPEL, HERBERT

    2007-01-30

    The large-scale analysis of scholarly artifact usage is constrained primarily by current practices in usage data archiving, privacy issues concerned with the dissemination of usage data, and the lack of a practical ontology for modeling the usage domain. As a remedy to the third constraint, this article presents a scholarly ontology that was engineered to represent those classes for which large-scale bibliographic and usage data exists, supports usage research, and whose instantiation is scalable to the order of 50 million articles along with their associated artifacts (e.g. authors and journals) and an accompanying 1 billion usage events. The real world instantiation of the presented abstract ontology is a semantic network model of the scholarly community which lends the scholarly process to statistical analysis and computational support. They present the ontology, discuss its instantiation, and provide some example inference rules for calculating various scholarly artifact metrics.

  9. DE-SOL-0002555 WIPP Solicitation J-33 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT H: RESERVED

  10. Use of nanofiltration to reduce cooling tower water usage.

    SciTech Connect (OSTI)

    Sanchez, Andres L.; Everett, Randy L.; Jensen, Richard Pearson; Cappelle, Malynda A.; Altman, Susan Jeanne

    2010-09-01

    Nanofiltration (NF) can effectively treat cooling-tower water to reduce water consumption and maximize water usage efficiency of thermoelectric power plants. A pilot is being run to verify theoretical calculations. A side stream of water from a 900 gpm cooling tower is being treated by NF with the permeate returning to the cooling tower and the concentrate being discharged. The membrane efficiency is as high as over 50%. Salt rejection ranges from 77-97% with higher rejection for divalent ions. The pilot has demonstrated a reduction of makeup water of almost 20% and a reduction of discharge of over 50%.

  11. Issues in International Energy Consumption Analysis: Electricity Usage in

    U.S. Energy Information Administration (EIA) Indexed Site

    India's Housing Sector - Energy Information Administration Canadian Energy Demand Electricity Usage in India's Housing Sector SERIES: Issues in International Energy Consumption Analysis Canadian Energy Demand Release date: June 2, 2015 The residential sector is one of the main end-use sectors in Canada accounting for 16.7% of total end-use site energy consumption in 2009 (computed from NRCan 2012. pp, 4-5). In this year, the residential sector accounted for 54.5% of buildings total site

  12. DC Fast Charger Usage in the Pacific Northwest

    SciTech Connect (OSTI)

    Salisbury, Shawn; Smart, John

    2015-02-01

    This document will describe the use of a number of Direct Current Fast Charging Stations throughout Washington and Oregon as a part of of the West Coast Electric Highway. It will detail the usage frequency and location of the charging stations INL has data from. It will also include aggregated data from hundreds of privately owned vehicles that were enrolled in the EV Project regarding driving distance when using one of the West Coast Electric Highway fast chargers. This document is a white paper that will be published on the INL AVTA website.

  13. Part VII: Section J - List of Documents, Exhibits, and Other Attachments, Attachment U

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U DE-AC36-08GO28308 Modification M1033 Attachment U Treaties and International Agreements Intellectual property rights for subject inventions made under NREL's award under the JCERDC will be allocated as set forth in the Agreement between the Department of Energy of the United States of America and the Government of the Republic of India of November 4, 2010 for Cooperation on a Joint Clean Energy Research and Development Center (JCERDC), and its "Project Annex on Intellectual Property

  14. Commercial and Multifamily Building Tenant Energy Usage Aggregation and Privacy

    SciTech Connect (OSTI)

    Livingston, Olga V.; Pulsipher, Trenton C.; Wang, Na

    2014-11-17

    In a number of cities and states, building owners are required to disclose and/or benchmark their building energy use. This requires the building owner to possess monthly whole-building energy usage information, which can be challenging for buildings in which individual tenants have their own utility meters and accounts with the utility. Some utilities and utility regulators have turned to aggregation of customer data as a way to give building owners the whole-building energy usage data while protecting customer privacy. However, no utilities or regulators appear to have conducted a concerted statistical, cybersecurity, and privacy analysis to justify the level of aggregation selected. Therefore, the Tennant Data Aggregation Task was established to help utilities address these issues and provide recommendations as well as a theoretical justification of the aggregation threshold. This study is focused on the use case of submitting data for ENERGY STAR Portfolio Manager (ESPM), but it also looks at other potential use cases for monthly energy consumption data.

  15. Government works with technology to boost gas output/usage

    SciTech Connect (OSTI)

    Nicoll, H.

    1996-10-01

    Specially treated ethane gas from fields of the Moomba area in the Cooper basin of South Australia now flows freely through 870 mi of interstate gas pipeline to an end-user in Sydney, New South Wales. This unprecedented usage of ethane is the result of a long-term cooperative agreement. The producer sought to provide the end-user with ethane gas for usage as a petrochemical feedstock to manufacture ethylene and plastic goods. The end-user had strict specifications for a low-CO{sub 2}, very dry ethane product with a small percentage of methane. In order to meet these, the producer committed millions of dollars to construct a high-technology, state-of-the-art ethane treatment facility in the Moomba area, and lay an extensive pipeline. Santos also contracted with the amines supplier to provide a high-performance, deep CO{sub 2} removal solvent with good corrosion prevention characteristics. The paper discusses the Moomba field overflow, gas treatment, government cooperation, and project completion.

  16. Microsoft Word - Attachment G2E.doc

    Office of Environmental Management (EM)

    E DESIGN DRAWINGS SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-1 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-2 of 38 1 Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2E Page G2E-3 of

  17. Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful...

    Office of Environmental Management (EM)

    1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 1 Unsuccessful Offeror Letter Template-Final 8-17-10 Microsoft Word -...

  18. Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 3 Conflicts of Interest Cert- template-Final 8-17-10 Microsoft Word -...

  19. Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality...

    Energy Savers [EERE]

    2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 2 Confidentiality Cert template-Final 8-17-10 Microsoft Word - Policy Flash...

  20. Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful...

    Office of Environmental Management (EM)

    4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy Flash 2010-78 Attachment 4 Successful Offeror Letter Template-Final 8-17-10 Microsoft Word - Policy...

  1. River Corridor Closure Contract Section J, Attachment J-13

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Contract No. DE-AC06-08RL14655 A000 1 ATTACHMENT J-13 HANFORD SITE SERVICES Hanford Site Services are divided into three categories: Category 1: DOE will provide these Mandatory...

  2. Attachment FY2011-31 OPAM | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    attachment 3 flow chart of new 17.5 FAR Team update based on FAC2005-47 Dec 13, 2010 More Documents & Publications Flash2011-31 OPAM Flash2011-26 OPAM ATTACHMENTFLASH2011-26-OPAM...

  3. Attachment FY2011-58 OPAM | Department of Energy

    Energy Savers [EERE]

    INFORMATION REPORTING Attachment FY2011-58 OPAM More Documents & Publications Chapter 35 - Research and Development Contracting AcqGuide35pt1rev2.doc&0; Federal Assistance...

  4. Microsoft Word - Attachment J-2 Hardware and Software System...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-2-1 ATTACHMENT J.2 HARDWARE AND SOFTWARE SYSTEM REQUIREMENTS a. The Contractor shall provide a DOD 5015.x compliant individual electronic file system for each open claim in ...

  5. Los Alamos National Laboratory Steam Plant Project Usage Data | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Usage Data 2 10_SMSI_SteamPlant_ThermalBasis of Analysis-Q1(011514) 2.10_SMSI_ApproxEst$Reconcile-Bechtel2009-SMSI-2013 2.10_SMSI_PipingAnnualR&R-Est_Rev122313 2.10_SMSI_Steam_CombinedEcon_011714_100%(Rev1) 2.10_SMSI_Steam_DistSystemOnlyEcon_011714_100% 2.10_SMSI_Steam_Option1-SteamCapitalEst(No-LANL$'s)_011714_100% 2.10_SMSI-Steam_Option2-HW-CapitalEst(No-LANL$'s)_011714_100% 131209XU50_XURP-LANL-Data_w-CostAlloc_CHP_121213 DOE Complex Experience

  6. Security Implications of Typical Grid Computing Usage Scenarios

    SciTech Connect (OSTI)

    Humphrey, Marty; Thompson, Mary R.

    2001-06-05

    A Computational Grid is a collection of heterogeneous computers and resources spread across multiple administrative domains with the intent of providing users uniform access to these resources. There are many ways to access the resources of a Computational Grid, each with unique security requirements and implications for both the resource user and the resource provider. A comprehensive set of Grid usage scenarios are presented and analyzed with regard to security requirements such as authentication, authorization, integrity, and confidentiality. The main value of these scenarios and the associated security discussions are to provide a library of situations against which an application designer can match, thereby facilitating security-aware application use and development from the initial stages of the application design and invocation. A broader goal of these scenarios are to increase the awareness of security issues in Grid Computing.

  7. River Corridor Closure Contract Section J, Attachment J-6

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Contract No. DE-AC06-05RL14655 Mod 459 1 ATTACHMENT J-6 ADVANCE AGREEMENT, PERSONNEL, AND RELATED COSTS This attachment will be prepared subsequent to Contract award pursuant to Clause H.15, Advance Understanding on Costs. The advance understandings listed below are subject to the specific limitations, conditions, and exclusions of subpart 31.2 of FAR as supplemented by Department of Energy Acquisition Regulation (DEAR) 931.2. TYPE OF COST ALLOWABILITY CLARIFICATION Beryllium Testing/Travel

  8. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Occupational Medical Services at Hanford J-2-1 Section J Attachment J-2 LIST OF APPLICABLE DOE DIRECTIVES - LIST B The DOE Directives listed below contain requirements relevant to the scope of work under this contract. In most cases, the requirements applicable to the Contractor are contained in the Contractor Requirement Document attached to the DOE directive. These directives are applicable, in whole or in part, in accordance with Section I Clause entitled "DEAR 970.5204-2 LAWS,

  9. Pressurizer with a mechanically attached surge nozzle thermal sleeve

    SciTech Connect (OSTI)

    Wepfer, Robert M

    2014-03-25

    A thermal sleeve is mechanically attached to the bore of a surge nozzle of a pressurizer for the primary circuit of a pressurized water reactor steam generating system. The thermal sleeve is attached with a series of keys and slots which maintain the thermal sleeve centered in the nozzle while permitting thermal growth and restricting flow between the sleeve and the interior wall of the nozzle.

  10. Microsoft Word - Attachment G2B.doc

    Office of Environmental Management (EM)

    B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit November 30, 2010 PERMIT ATTACHMENT G2B Page G2B-i ATTACHMENT G2 APPENDIX B SHAFT SEALING CONSTRUCTION PROCEDURES SHAFT SEALING SYSTEM COMPLIANCE SUBMITTAL DESIGN REPORT Appendix B Abstract This appendix describes equipment and procedures used to

  11. Attachment F - Bibliography and References | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    F - Bibliography and References Attachment F - Bibliography and References These documents are listed in Attachment F - Bibliography and References section of the Phase 2 Radiological Release Accident Investigation Report. DOE Order 225.1B, Accident Investigations, March 4, 2011 DOE Order 226.1B, Implementation of Department of Energy Oversight Policy, April 25, 2011 DOE Order 422.1, Conduct of Operations, June 29, 2010 DOE Order 426.1, Federal Technical Capability, November 19, 2009 DOE Manual

  12. Attachment 1: Green Lease Policies and Procedures for Lease Acquisition |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Green Lease Policies and Procedures for Lease Acquisition (45.31 KB) More Documents & Publications Green Lease Policies and Procedures for Lease Acquisition Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Energy Efficiency in Separate Tenant Spaces - A Feasibility Study

  13. Tamper indicating bolt

    DOE Patents [OSTI]

    Blagin, Sergei V.; Barkanov, Boris P.

    2004-09-14

    A tamper-indicating fastener has a cylindrical body with threads extending from one end along a portion of the body, and a tamper indicating having a transducer for converting physical properties of the body into electronic data; electronics for recording the electronic data; and means for communicating the recorded information to a remote location from said fastener. The electronics includes a capacitor that varies as a function of force applied by the fastener, and non-volatile memory for recording instances when the capacitance varies, providing an indication of unauthorized access.

  14. Microsoft Word - Flash2008-08attachmentFAC22.doc | Department...

    Energy Savers [EERE]

    Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc Microsoft Word - Flash2008-08attachmentFAC22.doc More Documents & Publications Policy Flash 2013-75...

  15. Attachment A: Modeling in Support of Additional Two-Unit Operating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. ...

  16. Enzymatic temperature change indicator

    DOE Patents [OSTI]

    Klibanov, Alexander M.; Dordick, Jonathan S.

    1989-01-21

    A temperature change indicator is described which is composed of an enzyme and a substrate for that enzyme suspended in a solid organic solvent or mixture of solvents as a support medium. The organic solvent or solvents are chosen so as to melt at a specific temperature or in a specific temperature range. When the temperature of the indicator is elevated above the chosen, or critical temperature, the solid organic solvent support will melt, and the enzymatic reaction will occur, producing a visually detectable product which is stable to further temperature variation.

  17. Triboluminescent indicator system

    DOE Patents [OSTI]

    Goods, Steven H.; Dentinger, Paul M.; Whinnery, Jr., Leroy L.

    2003-06-24

    There is provided a light emitting device comprising a plurality of triboluminescent particles dispersed throughout a low density, frangible body and activated by rapidly crushing the body in order to transfer mechanical energy to some portion of the particles. The light emitted by these mechanically excited particles is collected and directed into a light conduit and transmitted to a detector/indicator means.

  18. ZERO-TIME INDICATOR

    DOE Patents [OSTI]

    Sander, H.H.

    1960-08-30

    The travel time of a nuclear shock wave from its point of origin to a location can be determined accurately by an apparatus for noting and comparably recording both zerotime, as indicated by the electromagnetic transient associated with the nuclear detonation, and shock wave arrival time.

  19. Dissociative electron attachments to ethanol and acetaldehyde: A combined experimental and simulation study

    SciTech Connect (OSTI)

    Wang, Xu-Dong; Xuan, Chuan-Jin; Feng, Wen-Ling; Tian, Shan Xi

    2015-02-14

    Dissociation dynamics of the temporary negative ions of ethanol and acetaldehyde formed by the low-energy electron attachments is investigated by using the anion velocity map imaging technique and ab initio molecular dynamics simulations. The momentum images of the dominant fragments O{sup −}/OH{sup −} and CH{sub 3}{sup −} are recorded, indicating the low kinetic energies of O{sup −}/OH{sup −} for ethanol while the low and high kinetic energy distributions of O{sup −} ions for acetaldehyde. The CH{sub 3}{sup −} image for acetaldehyde also shows the low kinetic energy. With help of the dynamics simulations, the fragmentation processes are qualitatively clarified. A new cascade dissociation pathway to produce the slow O{sup −} ion via the dehydrogenated intermediate, CH{sub 3}CHO{sup −} (acetaldehyde anion), is proposed for the dissociative electron attachment to ethanol. After the electron attachment to acetaldehyde molecule, the slow CH{sub 3}{sup −} is produced quickly in the two-body dissociation with the internal energy redistributions in different aspects before bond cleavages.

  20. LEADING WITH LEADING INDICATORS

    SciTech Connect (OSTI)

    PREVETTE, S.S.

    2005-01-27

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites.

  1. Tamper-indicating seal

    DOE Patents [OSTI]

    Fiarman, Sidney; Degen, Michael F.; Peters, Henry F.

    1985-01-01

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over the item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection.

  2. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1992-09-22

    An apparatus is described for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the Kelly Vacuum System but can be modified for use with any standard mobile robot and cleaning tool. 14 figs.

  3. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  4. Biocompatible implants and methods of making and attaching the same

    DOE Patents [OSTI]

    Rowley, Adrian P; Laude, Lucien D; Humayun, Mark S; Weiland, James D; Lotfi, Atoosa; Markland, Jr., Francis S

    2014-10-07

    The invention provides a biocompatible silicone implant that can be securely affixed to living tissue through interaction with integral membrane proteins (integrins). A silicone article containing a laser-activated surface is utilized to make the implant. One example is an implantable prosthesis to treat blindness caused by outer retinal degenerative diseases. The device bypasses damaged photoreceptors and electrically stimulates the undamaged neurons of the retina. Electrical stimulation is achieved using a silicone microelectrode array (MEA). A safe, protein adhesive is used in attaching the MEA to the retinal surface and assist in alleviating focal pressure effects. Methods of making and attaching such implants are also provided.

  5. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, M.A.; Zollinger, W.T.

    1991-01-01

    This invention is comprised of an apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  6. Method for detecting pathogens attached to specific antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2005-01-25

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  7. Impedance measurements for detecting pathogens attached to antibodies

    DOE Patents [OSTI]

    Miles, Robin R.; Venkateswaran, Kodumudi S.; Fuller, Christopher K.

    2004-12-28

    The use of impedance measurements to detect the presence of pathogens attached to antibody-coated beads. In a fluidic device antibodies are immobilized on a surface of a patterned interdigitated electrode. Pathogens in a sample fluid streaming past the electrode attach to the immobilized antibodies, which produces a change in impedance between two adjacent electrodes, which impedance change is measured and used to detect the presence of a pathogen. To amplify the signal, beads coated with antibodies are introduced and the beads would stick to the pathogen causing a greater change in impedance between the two adjacent electrodes.

  8. Appendix DATA Attachment B: WIPP Waste Containers and Emplacement

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Attachment B: WIPP Waste Containers and Emplacement United States Department of Energy Waste Isolation Pilot Plant Carlsbad Field Office Carlsbad, New Mexico Appendix DATA-2014 Attachment B: WIPP Waste Containers and Emplacement Table of Contents DATA-B-1.0 Authorized Waste Emplacement Containers DATA-B-1.1 Container Descriptions DATA-B-1.2 Dunnage Containers DATA-B-1.3 Payload Descriptions DATA-B-1.4 Emplacement Configurations DATA-B-2.0 References List of Figures Figure DATA-B- 1. 55-gal Drum

  9. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, Steven J.; Groves, Scott E.

    1998-06-02

    An interface structure for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45.degree. with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning.

  10. Interface structure for hub and mass attachment in flywheel rotors

    DOE Patents [OSTI]

    Deteresa, S.J.; Groves, S.E.

    1998-06-02

    An interface structure is described for hub and mass attachment in flywheel rotors. The interface structure efficiently transmits high radial compression forces and withstands both large circumferential elongation and local stresses generated by mass-loading and hub attachments. The interface structure is comprised of high-strength fiber, such as glass and carbon, woven into an angle pattern which is about 45{degree} with respect to the rotor axis. The woven fiber is bonded by a ductile matrix material which is compatible with and adheres to the rotor material. This woven fiber is able to elongate in the circumferential direction to match the rotor growth during spinning. 2 figs.

  11. Reliability Testing the Die-Attach of CPV Cell Assemblies

    SciTech Connect (OSTI)

    Bosco, N.; Sweet, C.; Kurtz, S.

    2011-02-01

    Results and progress are reported for a course of work to establish an efficient reliability test for the die-attach of CPV cell assemblies. Test vehicle design consists of a ~1 cm2 multijunction cell attached to a substrate via several processes. A thermal cycling sequence is developed in a test-to-failure protocol. Methods of detecting a failed or failing joint are prerequisite for this work; therefore both in-situ and non-destructive methods, including infrared imaging techniques, are being explored as a method to quickly detect non-ideal or failing bonds.

  12. Part III - List of Documents, Exhibits, and Other Attachments

    National Nuclear Security Administration (NNSA)

    Updated 9/30/15 to Mod 0588 Contract No. DE-AC04-94AL85000 Modification No. M202 Section J - Page 1 Part III - List of Documents, Exhibits, and Other Attachments Section J LIST OF ATTACHMENTS Document Appendix A - Personnel Appendix (Revised RAs 1-12 and Mods M0541, M0558) Appendix B - Statement of Work (Revised M244, M264) Appendix C - Special Bank Account Agreement (Revised M248, M271, M461, M497, M508) Appendix D - Key Personnel (Revised M216, M224, M227, M229, M233, M252, M257, M272, M275,

  13. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    L, Attachment E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b.

  14. Apparatus for attaching a cleaning tool to a robotic manipulator

    DOE Patents [OSTI]

    Killian, Mark A.; Zollinger, W. Thor

    1992-01-01

    An apparatus for connecting a cleaning tool to a robotic manipulator so that the tool can be used in contaminated areas on horizontal, vertical and sloped surfaces. The apparatus comprises a frame and a handle, with casters on the frame to facilitate movement. The handle is pivotally and releasibly attached to the frame at a preselected position of a plurality of attachment positions. The apparatus is specifically configured for the KELLY VACUUM SYSTEM but can be modified for use with any standard mobile robot and cleaning tool.

  15. Tamper-indicating seal

    DOE Patents [OSTI]

    Fiarman, S.; Degen, M.F.; Peters, H.F.

    1982-08-13

    There is disclosed a tamper-indicating seal that permits in the field inspection and detection of tampering. Said seal comprises a shrinkable tube having a visible pattern of markings which is shrunk over th item to be sealed, and a second transparent tube, having a second visible marking pattern, which is shrunk over the item and the first tube. The relationship between the first and second set of markings produces a pattern so that the seal may not be removed without detection. The seal is particularly applicable to UF/sub 6/ cylinder valves.

  16. Methods and materials for nanocrystalline surface coatings and attachment of peptide amphiphile nanofibers thereon

    DOE Patents [OSTI]

    Stupp, Samuel I.; Spoerke, Erik D.; Anthony, Shawn G.; Niece; Krista L.

    2008-06-24

    Biocompatible composites comprising peptide amphiphiles and surface modified substrates and related methods for attachment thereon.

  17. River Corridor Closure Contract Section J, Attachment J-8

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Contract No. DE-AC06-05RL14655 A000 1 ATTACHMENT J-8 EMPLOYEE BENEFITS AND PENSION PLANS Pursuant to application employee benefit and pension requirements in Contract Section H, Special Contract Requirement, the Contractor shall annually submit the Report of Contractor Expenditures for Employee Supplemental Compensation

  18. Attached-sunspace designs: a nationwide economic appraisal

    SciTech Connect (OSTI)

    Roach, F.; Kirschner, C.

    1980-01-01

    Performance estimates for attached-sunspace passive solar heated residences have recently been incorporated into the Los Alamos/UNM EASE III model. These estimates are used to analyze the economic performance of a fixed dimension sunspace design when attached to a pre-existing single family residential unit. The sunspace is a passive design which can be easily and effectively adapted to a retrofit situation. Several key parameters are carefully evaluated for the sunspace retrofit design. These include loan or mortgage terms, ownership period, resale potential and competing conventional fuel prices. General economic and design parameters are combined in a variant of life cycle costing to evaluate the feasibility of both owner-built and contractor-built attached sunspaces for 220 regions in the contiguous United States. This evaluation is made for two conventional fuel types - natural gas and electric resistance - and for three resale values - 0%, 100%, and 200%. Results show that the prospect for conventional fuel displacement through retrofit of attached sunspaces is very good with the design's economic performance enhanced in regions with expensive conventional fuel alternatives.

  19. New methods of nozzle attachment to FRP spray headers

    SciTech Connect (OSTI)

    Boucher, E.J.

    1995-06-01

    The traditional method of attaching spray nozzles to FRP spray headers in the absorber tower of a wet limestone system has been through the use of 150 lb. Flanges. This paper will illustrate two additional methods (grooved adapters & adhesive bonded nozzles) and will demonstrate the cost saving associated versus the flanged option, as well as the advantages and disadvantages of each system.

  20. Jefferson Lab's Education web site hits new high-usage record during 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SOL season | Jefferson Lab web site hits new high-usage record during 2003 SOL season Jefferson Lab's Education web site hits new high-usage record during 2003 SOL season April 2, 2003 Jefferson Lab's Science Education web site is hitting new highs in usage - on a daily basis. Just yesterday - in a 24-hour-period - nearly 212,000 pages were viewed, according to Steve Gagnon, JLab Science Education technician. "It has been exciting to see the level of use our web site has gotten

  1. International energy indicators

    SciTech Connect (OSTI)

    Bauer, E.K.

    1981-02-01

    Extensive data are compiled for energy on the international scene and for the US. Data are indicated from the date given and into 1980 as far as available. Data are given for the international scene on: world crude oil production, 1975-to date; Iran: crude oil capacity, production, and shut-in, 1974-to date; Saudi Arabia: crude oil capacity, production, and shut-in, 1974-to date; OPEC (Ex-Iran and Saudi Arabia): capacity, production, and shut-in, 1974-to date; oil stocks: Free World, US, Japan, and Europe (landed), 1973-to date; petroleum consumption by industrial countries, 1973-to date; USSR crude oil production, 1974-to date; Free World and US nuclear generation capacity, 1973-to date. Data are supplied specifically for the US on US gross imports of crude oil and products, 1973-to date; landed cost of Saudi crude in current and 1974 dollars; US trade in bituminous coal, 1973-to date; summary of US merchandise trade, 1976-to date; and energy/GNP ratio.

  2. API for current energy usage data per consumer | OpenEI Community

    Open Energy Info (EERE)

    API for current energy usage data per consumer Home > Groups > Developer Hello, I'm a web application developer working on an app to determine an individuals environmental impact,...

  3. Enhanced BMP signaling results in supernumerary tooth formation in USAG-1 deficient mouse

    SciTech Connect (OSTI)

    Murashima-Suginami, Akiko; Takahashi, Katsu Sakata, Tomoko; Tsukamoto, Hiroko; Sugai, Manabu; Yanagita, Motoko; Shimizu, Akira; Sakurai, Takeshi; Slavkin, Harold C.; Bessho, Kazuhisa

    2008-05-16

    Uterine sensitization associated gene-1 (USAG-1) is a BMP antagonist, and also modulates Wnt signaling. We previously reported that USAG-1 deficient mice have supernumerary teeth. The supernumerary maxillary incisor appears to form as a result of the successive development of the rudimentary upper incisor. USAG-1 abrogation rescued apoptotic elimination of odontogenic mesenchymal cells. We confirmed that BMPs were expressed in both the epithelium and mesenchyme of the rudimentary incisor at E14 and E15. BMP signaling in the rudimentary maxillary incisor, assessed by expressions of Msx1 and Dlx2 and the phosphorylation of Smad protein, was significantly enhanced. Wnt signaling as demonstrated by the nuclear localization of {beta}-catenin was also up-regulated. Inhibition of BMP signaling rescues supernumerary tooth formation in E15 incisor explant culture. Based upon these results, we conclude that enhanced BMP signaling results in supernumerary teeth and BMP signaling was modulated by Wnt signaling in the USAG-1 deficient mouse model.

  4. Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics...

    Office of Scientific and Technical Information (OSTI)

    Water Usage for In-Situ Oil Shale Retorting - A Systems Dynamics Model Earl D. Mattson; Larry Hull; Kara Cafferty 02 PETROLEUM Water Water A system dynamic model was construction...

  5. Y-12 reduces water usage and wins award | National Nuclear Security...

    National Nuclear Security Administration (NNSA)

    reduces water usage and wins award Tuesday, January 5, 2016 - 12:00am NNSA Blog From left: ... Byrd, Gary Guge and Jake Thompson were instrumental in protecting Y-12 water quality. ...

  6. Commercial Building Tenant Energy Usage Data Aggregation and Privacy: Technical Appendix

    SciTech Connect (OSTI)

    Livingston, Olga V.; Pulsipher, Trenton C.; Anderson, David M.

    2014-11-12

    This technical appendix accompanies report PNNL–23786 “Commercial Building Tenant Energy Usage Data Aggregation and Privacy”. The objective is to provide background information on the methods utilized in the statistical analysis of the aggregation thresholds.

  7. Issues in International Energy Consumption Analysis: Electricity Usage in Indias Housing Sector

    U.S. Energy Information Administration (EIA) Indexed Site

    Issues in International Energy Consumption Analysis: Electricity Usage in India's Housing Sector November 2014 Independent Statistics & Analysis www.eia.gov U.S. Department of Energy Washington, DC 20585 U.S. Energy Information Administration | Issues in International Energy Consumption Analysis: Electricity Usage in India's Housing Sector i This report was prepared by the U.S. Energy Information Administration (EIA), the statistical and analytical agency within the U.S. Department of

  8. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, P.E.; Iyer, N.C.; Hannan, W.F. III.

    1992-12-08

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature. 6 figs.

  9. Shunt attachment and method for interfacing current collection systems

    DOE Patents [OSTI]

    Denney, Paul E. (State College, PA); Iyer, Natraj C. (Columbia, SC); Hannan, III, William F. (Monroeville Boro, PA)

    1992-01-01

    A composite brush to shunt attachment wherein a volatile component of a composite but mostly metallic brush, used for current collection purposes, does not upon welding or brazing, adversely affect the formation of the interfacial bond with a conductive shunt which carries the current from the zone of the brush. The brush to shunt attachment for a brush material of copper-graphite composite and a shunt of copper, or substituting silver for copper as an alternative, is made through a hot isostatic pressing (HIP). The HIP process includes applying high pressure and temperature simultaneously at the brush to shunt interface, after it has been isolated or canned in a metal casing in which the air adjacent to the interface has been evacuated and the interfacial area has been sealed before the application of pressure and temperature.

  10. Turbine blade and non-integral platform with pin attachment

    SciTech Connect (OSTI)

    Campbell, Christian X; Eng, Darryl; Marra, John J

    2015-01-27

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  11. Turbine blade and non-integral platform with pin attachment

    DOE Patents [OSTI]

    Campbell, Christian Xavier; Eng, Darryl; Marra, John J.

    2016-08-02

    Platforms (36, 38) span between turbine blades (23, 24, 25) on a disk (32). Each platform may be individually mounted to the disk by a pin attachment (42). Each platform (36) may have a rotationally rearward edge portion (50) that underlies a forward portion (45) of the adjacent platform (38). This limits centrifugal bending of the rearward portion of the platform, and provides coolant sealing. The rotationally forward edge (44A, 44B) of the platform overlies a seal element (51) on the pressure side (28) of the forwardly adjacent blade, and does not underlie a shelf on that blade. The pin attachment allows radial mounting of each platform onto the disk via tilting (60) of the platform during mounting to provide mounting clearance for the rotationally rearward edge portion (50). This facilitates quick platform replacement without blade removal.

  12. PART III … LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    National Nuclear Security Administration (NNSA)

    Page 130 PART III - LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS SECTION J LIST OF APPENDICES - TABLE OF CONTENTS Appendix A Statement of Work Appendix B Award Fee Plan Appendix C Transition Plan Appendix D Sensitive Foreign Nations Control Appendix E Performance Guarantee Agreement(s) Appendix F List of Applicable Directives Appendix G Personnel Appendix Appendix H Key Personnel Appendix I Small Business Subcontracting Plan Appendix J Diversity Plan Guidance Appendix K Program Management

  13. SECTION L … ATTACHMENT A - PERFORMANCE GUARANTEE AGREEMENT

    National Nuclear Security Administration (NNSA)

    A, Page 1 SECTION L ATTACHMENT A PERFORMANCE GUARANTEE AGREEMENT For value received, and in consideration of, and in order to induce the United States (the Government) to enter into Contract [insert Contract number] for the management and operation of the Nevada National Security Site (the "Contract") dated _______________, by and between the Government and _______________ (Contractor), the undersigned, ____________________ _______________ (Guarantor), a corporation incorporated in the

  14. River Corridor Closure Contract Section J, Attachment J-14

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-08RL14655 A099 1 SECTION J, ATTACHMENT J-14 ACRONYM LIST The following acronyms are used in this Contract: AB Authorization Basis ACO Administrative Contracting Officer ACWP Actual Cost of Work Performed ADR Alternative Dispute Resolution ARRA American Recovery and Reinvestment Act B&R Budgeting and Reporting BCWP Budgeted Cost of Work Performed BCWS Budgeted Cost of Work Scheduled BHI Bechtel Hanford, Inc. BMS Business Management System BRC Budget and Reporting

  15. DE-SOL-0008449 Attachment L-7c

    National Nuclear Security Administration (NNSA)

    DE-SOL-0008449 Attachment L-7c [Type here] VIETNAM MOBILIZATION PLAN DE-SOL-0008449 1.0 INTRODUCTION Based on the information presented below, the Statement of Work requirements relating to in- country deployments, and the Work Breakdown Structure (WBS) provided in Table 1, the Offeror shall develop a mobilization plan that describes its approach to a comprehensive Nuclear Smuggling Detection and Deterrence (NSDD) deployment involving Port of Cat Lai seaport in Vietnam. 2.0 REQUIREMENTS The

  16. Microsoft Word - Attachment 1 DICCE2 Statement of Work

    National Nuclear Security Administration (NNSA)

    Attachment 1 DE-SOL-0008449 1. OBJECTIVE The objective of this procurement is to install integrated sustainable radiation detection equipment at selected international land border crossings, airports, feeder ports and seaports in cooperation with international partners around the world in order to strengthen the overall capability of partner countries to deter, detect, and interdict illicit trafficking in special nuclear and other radiological materials. The focus is on the integration

  17. Removable, hermetically-sealing, filter attachment system for hostile environments

    DOE Patents [OSTI]

    Mayfield, Glenn L [Richland, WA

    1983-01-01

    A removable and reusable filter attachment system. A filter medium is fixed o, and surrounded by, a filter frame having a coaxial, longitudinally extending, annular rim. The rim engages an annular groove which surrounds the opening of a filter housing. The annular groove contains a fusible material and a heating mechanism for melting the fusible material. Upon resolidifying, the fusible material forms a hermetic bond with the rim and groove. Remelting allows detachment and replacement of the filter frame.

  18. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, J.E.

    1995-07-25

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints. 3 figs.

  19. Pin and roller attachment system for ceramic blades

    DOE Patents [OSTI]

    Shaffer, James E. (Maitland, FL)

    1995-01-01

    In a turbine, a plurality of blades are attached to a turbine wheel by way of a plurality of joints which form a rolling contact between the blades and the turbine wheel. Each joint includes a pin and a pair of rollers to provide rolling contact between the pin and an adjacent pair of blades. Because of this rolling contact, high stress scuffing between the blades and the turbine wheel reduced, thereby inhibiting catastrophic failure of the blade joints.

  20. Expert Meeting Report: Cladding Attachment Over Exterior Insulation

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cladding Attachment Over Exterior Insulation P. Baker Building Science Corporation October 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus,

  1. Attachment J-16 Portfolio Management Task Order 14-001

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mod 323 Attachment J-16 Portfolio Management Task Order 14-001 Statement of Work - 1 - Title: AMRP PBS 41 - Project Management / Project Controls Support Revision Number: 0 Date: September 17, 2013 Start: October 1, 2013 Finish: September 30, 2014 1.0 DESCRIPTION Mission Support Alliance (MSA) Portfolio Management (PFM) will provide the following project management/project controls support services as described below. The services will be performed in accordance with Contract DE-AC06-09RL14728,

  2. SEC L_Attach G_Key Personnel Cost Sheet

    National Nuclear Security Administration (NNSA)

    L, Attachment G - Management Team Cost Sheet Definitions of items to be included in the worksheet Name Title Key Personnel (Y/N) Reimbursable Annual Base Salary Reimbursable Incentive Pay and bonuses Reimbursable Deferred compensation Reimbursable Employer contributions to Employee Stock Ownership Plans (ESOPs) Reimbursable Employer Contributions to Defined Contribution Pension Plans Current Annual Base Salary Current Total Annual Compensation An ESOP is a stock bonus plan designed to invest

  3. Total U.S. Housing Units...................................

    U.S. Energy Information Administration (EIA) Indexed Site

    ... Space Heating Usage Indicators Million U.S. Housing Units Detached Attached Energy Information Administration 2005 Residential Energy Consumption Survey: Preliminary Housing ...

  4. PolFlash10-31_attach1.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-31attach1.pdf More Documents & Publications PolFlash10-31.pdf PolFlash10-31attach2.pdf Initial Application for FAC-C, Purchasing, Financial Assistance and Property...

  5. Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

    Office of Environmental Management (EM)

    43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business Review Form Attached is Policy Flash 2013-43 DOE F 4220.2 Small Business...

  6. Microsoft Word - ARRAGuideAttachment10v1.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ARRAGuideAttachment10v1.doc Microsoft Word - ARRAGuideAttachment10v1.doc More Documents & Publications Microsoft Word - ARRAAttachment12v1.doc Microsoft Word - DRAFT CRB Interview Guidance

  7. Attached is Policy Flash 2013-34 Department of Energy Acquisition...

    Broader source: Energy.gov (indexed) [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation The information attached to this policy flash may be superseded at a...

  8. Attachment A: Modeling in Support of Additional Two-Unit Operating

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Configurations | Department of Energy Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations Docket No. EO-05-01: Attachment to the Operating Plan of Mirant Potomac River, LLC Attachment A: Modeling in Support of Additional Two-Unit Operating Configurations (28.18 KB) More Documents & Publications Mirant Potomac, Alexandria, Virginia: Maximum Impacts Predicted by AERMOD-PRIME

  9. EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 10-07C/SEP 10-006B Attachment 1: Process Metrics List EECBG 10-07C/SEP 10-006B Attachment 1: Process Metrics List eecbg_sep_reporting_guidance_attachment_06242011.pdf (56.65 KB) More Documents & Publications EECBG SEP Attachment 1 - Process metric list EECBG Program Notice 10-07A DOE Recovery Act Reporting Requirements for the State Energy Program

  10. Post-Installation Report Outline (IDIQ Attachment J-9) | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Installation Report Outline (IDIQ Attachment J-9) Post-Installation Report Outline (IDIQ Attachment J-9) Document offers a post-installation report outline sample for an energy savings performance contract. Download the post-installation report outline document. (56.26 KB) More Documents & Publications Measurement and Verification Plan and Savings Calculations Methods Outline (IDIQ Attachment J-8) Annual Report Outline (IDIQ Attachment J-10) ESPC Task Order Financial Schedules

  11. FIELD TEST OF THE FLAME QUALITY INDICATOR

    SciTech Connect (OSTI)

    Andrew M. Rudin; Thomas Butcher; Henry Troost

    2003-02-04

    pump cut-off. Service organizations can use these early indications to reduce problems and service costs. There were also some ''call-for-service'' indications for which problems were not identified. The test program also showed that monitoring of the flame can provide information on burner run times and this can be used to estimate current oversize factors and to determine actual fuel usage, enabling more efficient fuel delivery procedures.

  12. The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage

    SciTech Connect (OSTI)

    Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

    2012-02-03

    On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

  13. AttachmentFlash_2010-22(1).pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22(1).pdf AttachmentFlash2010-22(1).pdf PDF icon AttachmentFlash2010-22(1).pdf More Documents & Publications Policy Flash 2016-10 fac2001-27.pdf AttachmentFlash2010-55.pdf...

  14. River Corridor Closure Contract Section J, Attachment J-10

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-10 RCC SUBCONTRACTS EXISTING AT TIME OF SOLICITATION The following subcontracts are/were available for assignment to the Contractor at the time Solicitation No. DE-RP06-04RL14655 was issued: End Date Current Value Description Supplier 02/28/05 $ 5,994,091 100 B/C AREA PIPELINES RCI ENVIRONMENTAL, INC. 10/31/06 $ 1,324,615 100-BC BURIAL GROUNDS AND REMAINING SITES FEDERAL ENGINEERS & CONSTRUCTORS 12/31/05 $ 3,400,000 116-N-1 CRIB

  15. River Corridor Closure Contract Section J, Attachment J-11

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Contract No. DE-AC06-05RL14655 Modification 398 1 SECTION J, ATTACHMENT J-11 RCC FUNDING PROFILE In accordance with the Section B clause entitled Changes to Target Cost, Target Fee, and Schedule, the following is the projected funding profile for this Contract: Fiscal Year Annual Budget Authority ($1M)* Cumulative Budget Authority ($1M)* 2005** $ 107** $ 107 2006 183 290 2007 212 502 2008 232 734 2009 242 976 2010 297 1,273 2011 376 1,649 2012 302 1,951 2013 300 2,251 2014 280 2,531 2015 201

  16. River Corridor Closure Contract Section J, Attachment J-4

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Contract No. DE-AC06-05RL14655 A000 SECTION J, ATTACHMENT J-4 SMALL BUSINESS SUBCONTRACTING PLAN The Washington Closure LLC Small Business Subcontracting Plan is on file at the Richland Operations Office and will be available at www.hanford.gov/rl The Washington Smalll Business Subcontracting Goals are as follows (as a percent of total subcontracting effort): Small Business (SB): 65.0% Small Disadvantaged Business: 22.0% Women-Owned SB: 13.0% HUBZone SB: 4.5% Veteran-Owned SB: 3.0%

  17. River Corridor Closure Contract Section J, Attachment J-5

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-05RL14655 A000 1 SECTION J, ATTACHMENT J-5 SMALL DISADVANTAGED BUSINESS PARTICIPATION PROGRAM TARGETS (A) Washington Closure NAICS Code Description of NAICS Major Group SDB Dollars Percentage** Subtotal (B) Subcontractors NAICS Code Description of NAICS Major Group SDB Dollars Percentage** 238 Specialty Trade Contractors 37,352,000 1.92 423 Merchant Wholesalers, Durable Goods* 43,104,000 2.21 541 Professional, scientific, & tech srvcs* 13,931,000 0.72 562 Waste mgt

  18. River Corridor Closure Contract Section J, Attachment J-15

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Contract No. DE-AC06-08RL14655 Modification 214 1 ATTACHMENT J-15 STANDARDIZED TRAINING AND COMMON SAFETY PROCESSES Document No. Worker Safety Requirement Procedure Status WCH Participation Authorized DOE-0336, Rev. 1 Hanford Site Lockout-Tagout Procedure [as required by 29 CFR 1910.147, CRD O 5480.19 (Chg. 2 Chapter IX and Rev.3), Conduct of Operations Requirements for DOE Facilities] Completed Rev. 1 (Reference MSA- 1002489, 9/2/10) Approved by DOE-RL on 11/10/10 (Reference 11-OOD- 0007) Yes

  19. Section L - Attachment D - Past-Performance Information Form

    National Nuclear Security Administration (NNSA)

    E, Page 1 SECTION L ATTACHMENT E PAST PERFORMANCE INFORMATION FORM 1. Complete Name of Offeror or Team Member 2. Contract Title and Location 3. Customer Name, Current Address, Telephone Number and E-mail 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date the Work was Completed 8. Initial Contract Price /Estimated Cost and Fee 9. Final Amount Invoiced/Amount Invoiced to Date 10a. Technical Point of Contact (see instruction below) 10b. Contracting

  20. Attachment L-2a Relevant Corporate Experience Form

    National Nuclear Security Administration (NNSA)

    [Submit in Volume II, TAB 1] DE-SOL-0008449 Attachment L-2a Relevant Corporate Experience Form 1) Experience Submission Number: (Start with 1 and number consecutively) 2). Name and Address of Offeror or Team Member 3. Complete Name/Title of Contract and Location/Address of project/contract 3. Project Owner Name and Address 4. Contract Number and Type of Contract 5. Date of Contract Award 6. Date Work Commenced 7. Date Work Ended 8. Initial Contract Price/Cost and Fee 9. Final Amount

  1. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    E SECTION J APPENDIX E PERFORMANCE GUARANTEE AGREEMENT(S) [Note: To be inserted by the Contracting Officer prior to contract award. For Performance Guarantee Agreement(s) template, see Section L, Attachment A.]

    I SECTION J APPENDIX I SMALL BUSINESS SUBCONTRACTING PLAN [Note: To be inserted by the Contracting Officer prior to

    J, Page 1 SECTION J APPENDIX J DIVERSITY PLAN GUIDANCE In accordance with Section I clause DEAR 970.5226-1, Diversity Plan, this Appendix provides guidance to

  2. PART III -LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    J-6-1 Attachment J-6 -- Government-Furnished Property (GFP) Inventory Identifier Official Name Manufacturer Model Site Stlv1 Stlv2 WC45089 BOOTH INDUSTRIAL ACOUSTIC BOOTH RCHN 1979SNYDER 142 WC54531 EXAM TABLE MIDMARK 411 200W 2719WB W23 WC54532 EXAM TABLE MIDMARK 411 200W 2719WB W24 WC54533 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 112 WC54534 EXAM TABLE MIDMARK 411 200W 2719WB W25 WC54535 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 125 WC54536 EXAM TABLE MIDMARK 411 RCHN 1979SNYDER 123 WC54537 EXAM

  3. Energy Intensity Indicators: Indicators for Major Sectors | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy for Major Sectors Energy Intensity Indicators: Indicators for Major Sectors This system of energy intensity indicators for total energy covers the economy as a whole and each of the major end-use sectors - transportation, industry, commercial, and residential, as well as the electric power sector. These sectors are shown in Figure 1. Please go to the menu below the figure to see a more detailed discussion of historical trends in the energy intensity indicator for a particular sector.

  4. Cladding Attachment Over Thick Exterior Insulating Sheathing (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of wood-framed walls and mass masonry wall assemblies. The location of the insulation on the exterior of the structure has many direct benefits, including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased airtightness and improved water management. For thick layers of exterior insulation (more than 1.5 in.), the use of wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. Although the approach has proven effective, there is significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved in the development of the vertical displacement resistance capacity. In addition, the long-term in-service performance of the system has been questioned due to potential creep effects of the assembly under the sustained dead load of the cladding and effects of varying environmental conditions. In addition, the current International Building Code (IBC) and International Residential Code (IRC) do not have a provision that specifically allows this assembly.

  5. Predicting Envelope Leakage in Attached Dwellings (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2013-11-01

    The most common method of measuring air leakage is to perform single (or solo) blower door pressurization and/or depressurization test. In detached housing, the single blower door test measures leakage to the outside. In attached housing, however, this "solo" test method measures both air leakage to the outside and air leakage between adjacent units through common surfaces. Although minimizing leakage to neighboring units is highly recommended to avoid indoor air quality issues between units, reduce pressure differentials between units, and control stack effect, the energy benefits of air sealing can be significantly overpredicted if the solo air leakage number is used in the energy analysis. Guarded blower door testing is more appropriate for isolating and measuring leakage to the outside in attached housing. This method uses multiple blower doors to depressurize adjacent spaces to the same level as the unit being tested. Maintaining a neutral pressure across common walls, ceilings, and floors acts as a "guard" against air leakage between units. The resulting measured air leakage in the test unit is only air leakage to the outside. Although preferred for assessing energy impacts, the challenges of performing guarded testing can be daunting.

  6. Nevada Test Site Environmental Report 2008 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy A. Wills

    2009-09-01

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2008 (National Security Technologies, LLC [NSTec], 2009a). Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  7. Nevada Test Site Environmental Report 2009, Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills, ed.

    2010-09-13

    This attachment expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2009. Included are subsections that summarize the sites geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the sites environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site that afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  8. Tamper-indicating device having a glass body

    DOE Patents [OSTI]

    Johnston, Roger G.; Garcia, Anthony R. E.

    2003-04-29

    A tamper-indicating device is described. The device has a first glass body member and a second glass body member that are attached to each other through a hasp. The glass body members of the device can be tempered. The body members can be configured with hollow volumes into which powders, microparticles, liquids, gels, or combinations thereof are sealed. The choice, the amount, and the location of these materials can produce a visible, band pattern to provide each body member with a unique fingerprint identifier, which makes it extremely difficult to repair or replace once it is damaged in order to avoid tamper detection.

  9. DE-EM-0001971 WIPP M&O J-22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    22 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT E: PERFORMANCE GUARANTEE AGREEMENT (Performance Guarantee Agreements dated, August 17, 2012 is hereby incorporated

  10. Video game console usage and US national energy consumption: Results from a field-metering study

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Desroches, Louis-Benoit; Greenblatt, Jeffery B.; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah K.; Young, Scott J.; Donovan, Sally M.; et al

    2014-10-23

    There has been an increased in attention placed on the energy consumption of miscellaneous electronic loads in buildings by energy analysts and policymakers in recent years. The share of electricity consumed by consumer electronics in US households has increased in the last decade. Many devices, however, lack robust energy use data, making energy consumption estimates difficult and uncertain. Video game consoles are high-performance machines present in approximately half of all households and can consume a considerable amount of power. The precise usage of game consoles has significant uncertainty, however, leading to a wide range of recent national energy consumption estimates.more » We present here an analysis based on field-metered usage data, collected as part of a larger field metering study in the USA. This larger study collected data from 880 households in 2012 on a variety of devices, including 113 game consoles (the majority of which are Generation 7 consoles). From our metering, we find that although some consoles are left on nearly 24 h/day, the overall average usage is lower than many other studies have assumed, leading to a US national energy consumption estimate of 7.1 TWh in 2012. Nevertheless, there is an opportunity to reduce energy use with proper game console power management, as a substantial amount of game console usage occurs with the television turned off. The emergence of Generation 8 consoles may increase national energy consumption.« less

  11. Video game console usage and US national energy consumption: Results from a field-metering study

    SciTech Connect (OSTI)

    Desroches, Louis-Benoit; Greenblatt, Jeffery B.; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah K.; Young, Scott J.; Donovan, Sally M.; Ganeshalingam, Mohan

    2014-10-23

    There has been an increased in attention placed on the energy consumption of miscellaneous electronic loads in buildings by energy analysts and policymakers in recent years. The share of electricity consumed by consumer electronics in US households has increased in the last decade. Many devices, however, lack robust energy use data, making energy consumption estimates difficult and uncertain. Video game consoles are high-performance machines present in approximately half of all households and can consume a considerable amount of power. The precise usage of game consoles has significant uncertainty, however, leading to a wide range of recent national energy consumption estimates. We present here an analysis based on field-metered usage data, collected as part of a larger field metering study in the USA. This larger study collected data from 880 households in 2012 on a variety of devices, including 113 game consoles (the majority of which are Generation 7 consoles). From our metering, we find that although some consoles are left on nearly 24 h/day, the overall average usage is lower than many other studies have assumed, leading to a US national energy consumption estimate of 7.1 TWh in 2012. Nevertheless, there is an opportunity to reduce energy use with proper game console power management, as a substantial amount of game console usage occurs with the television turned off. The emergence of Generation 8 consoles may increase national energy consumption.

  12. A possible oriented attachment growth mechanism for silver nanowire formation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companionmore » molecular dynamics performed with the embedded atom method are in agreement with our experimental data.« less

  13. Microsoft Word - Attachment J.9, Appendix I Directives

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    192 Part III, Section J, Appendix I J-I-1 ATTACHMENT J.9 APPENDIX I DOE DIRECTIVES/LIST B Applicable to the Operation of AMES Laboratory Contract No. DE-AC02-07CH11358 Contract No. DE-AC02-07CH11358 Contract Modification No. 0192 Part III, Section J, Appendix I NUMBER DATE TITLE J-I-2 O 130.1 09/29/95 Budget Formulation Process O 142.3A 10/14/10 Unclassified Foreign Visits and Assignments Program O 150.1A 03/31/14 Continuity Programs O 151.1C 11/02/05 Comprehensive Emergency Management System O

  14. A possible oriented attachment growth mechanism for silver nanowire formation

    SciTech Connect (OSTI)

    Murph, Simona E. Hunyadi; Murphy, Catherine J.; Leach, Austin; Gall, Kenneth

    2015-04-06

    Electron microscopy studies suggest that silver nanowires prepared by an approach reported earlier by us (Caswell, K. K., Bender, C. M., Murphy, C. J. Nano Lett.,2003, 3, 667–669) form through a coarsening process via an oriented attachment mechanism. Initially, silver nucleation centers were produced by chemical reduction of silver ions in boiling water, with sodium citrate and sodium hydroxide as additives in solution. These nucleation centers, with a twinned crystallographic orientation, ultimately merge into fully grown silver nanowires. This is a completely different mechanism from the seed-mediated growth approach, which has also been used to produce silver nanowires. Furthermore, companion molecular dynamics performed with the embedded atom method are in agreement with our experimental data.

  15. Energy Intensity Indicators: Indicators Data | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Data Energy Intensity Indicators: Indicators Data The files listed below contain energy intensity data and documentation that supports the information presented on this website. The files are in Microsoft® Excel® format (2007 and later versions) and are available to view and/or download. The entire set of files is also available for download as a zipped* (compressed) file. Economywide Transportation Sector Industrial Sector Residential Buildings Sector Commercial Buildings Sector Electricity

  16. Attachment 2: Solicitation for Offers with New and Revised Green Lease Text

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy 2: Solicitation for Offers with New and Revised Green Lease Text Attachment 2: Solicitation for Offers with New and Revised Green Lease Text Solicitation for Offers Paragraphs with New and Revised Green Lease Text (101.59 KB) More Documents & Publications Attachment 1: Green Lease Policies and Procedures for Lease Acquisition Attachment 4: Unrevised SFO Paragraphs Reissued Green Lease Policies and Procedures for Lease Acquisition

  17. Attachment 5 Volume II Pricing Matrix.xls | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Attachment 5 Volume II Pricing Matrix.xls&0; More Documents & Publications Microsoft Word - FY07AnnualReport.doc CX-005455: Categorical Exclusion Determination Microsoft Word -...

  18. Attachment L-7b Vietnam Design Requirements Document is an Official

    National Nuclear Security Administration (NNSA)

    b Vietnam Design Requirements Document is an Official Use Only document please see Section ... The Government considers the Vietnam Design Requirements Document, Attachment L-7b an ...

  19. Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum...

    Office of Scientific and Technical Information (OSTI)

    Mechanisms of Oriented Attachment of TiO2 Nanocrystals in Vacuum and Humid Environments: Reactive Molecular Dynamics Citation Details In-Document Search Title: Mechanisms of ...

  20. Attachment A: AIP Program Principles (Questions and Answers 1-12)

    Broader source: Energy.gov [DOE]

    This attachment contains twelve questions and answers that designate the mandatory AIP provisions that shall be included in new and renegotiated agreements and discusses the principles underlying...

  1. T-534: Vulnerability in the PDF distiller of the BlackBerry Attachment...

    Broader source: Energy.gov (indexed) [DOE]

    PROBLEM: Vulnerability in the PDF distiller of the BlackBerry Attachment Service for the BlackBerry Enterprise Server. PLATFORM: * BlackBerry Enterprise Server Express version...

  2. Microsoft PowerPoint - Window_Attachments-Webinar-Oct_28_2015...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... that examined 11 different typical residential window attachments including: - shades - ... window. * Energy-efficient window coverings can reduce heat loss through windows ...

  3. DE-EM-0001971 WIPP M&O J-i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    i PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J LIST OF ATTACHMENTS Table of Content ATTACHMENT A: LAWS, REGULATIONS, AND DIRECTIVES (DEC 2000) ............ 1 ATTACHMENT B: SMALL, SMALL DISADVANTAGED, AND WOMEN-OWNED SMALL BUSINESS SUBCONTRACTING PLAN ......................... 7 ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) .............................................................................. 8 ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION

  4. Energy Efficiency Indicators Methodology Booklet

    SciTech Connect (OSTI)

    Sathaye, Jayant; Price, Lynn; McNeil, Michael; de la rue du Can, Stephane

    2010-05-01

    This Methodology Booklet provides a comprehensive review and methodology guiding principles for constructing energy efficiency indicators, with illustrative examples of application to individual countries. It reviews work done by international agencies and national government in constructing meaningful energy efficiency indicators that help policy makers to assess changes in energy efficiency over time. Building on past OECD experience and best practices, and the knowledge of these countries' institutions, relevant sources of information to construct an energy indicator database are identified. A framework based on levels of hierarchy of indicators -- spanning from aggregate, macro level to disaggregated end-use level metrics -- is presented to help shape the understanding of assessing energy efficiency. In each sector of activity: industry, commercial, residential, agriculture and transport, indicators are presented and recommendations to distinguish the different factors affecting energy use are highlighted. The methodology booklet addresses specifically issues that are relevant to developing indicators where activity is a major factor driving energy demand. A companion spreadsheet tool is available upon request.

  5. Usage Reports

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    See queue wait times, hours used, top users and other summary statistics for jobs run at NERSC (login required). Read More Parallel Job Statistics rest... Read More Edison ...

  6. HSI Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    rmdir Delete an HPSS directory Local File and Directory Commands Command Function lcd Change local directory lls List local directory lmkdir Make a local directory lpwd...

  7. HTAR Usage

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    To specify what HPSS username to use set the HPSSPRINCIPAL environmental variable: % env HPSSPRINCIPALusername htar -cf nova.tar nova To list the member files of nova.tar type: ...

  8. Porous expandable device for attachment to bone tissue

    DOE Patents [OSTI]

    Rybicki, Edmund F.; Wheeler, Kenneth Ray; Hulbert, Lewis E.; Karagianes, Manuel Tom; Hassler, Craig R.

    1977-01-01

    A device for attaching to substantially solid living bone tissue, comprising a body member having an outer surface shaped to fit approximately into an empty space in the tissue and having pores into which the tissue can grow to strengthen the bond between the device and the tissue, and adjustable means for expanding the body member against the tissue to an extent such as to provide a compressive stress capable of maintaining a snug and stable fit and of enhancing the growth of the tissue into the pores in the body member. The expanding means is adjustable to provide a stress between the tissue and the body member in the range of about 150 to 750 psi, typically 150 to 350 psi. Typically the body member comprises an expandable cylindrical portion having at least one radial slit extending longitudinally from a first end to the vicinity of the opposite (second) end thereof, at least one radial slit extending longitudinally from the second end to the vicinity of the first end thereof, and a tapered cylindrical hole extending coaxially from a wider circular opening in the first end to a narrower circular opening communicating with the second end.

  9. Expert Meeting Report: Cladding Attachment Over Exterior Insulation (BSC Report)

    SciTech Connect (OSTI)

    2013-10-01

    The addition of insulation to the exterior of buildings is an effective means of increasing the thermal resistance of both wood framed walls as well as mass masonry wall assemblies. The location of the insulation to the exterior of the structure has many direct benefits including better effective R-value from reduced thermal bridging, better condensation resistance, reduced thermal stress on the structure, as well as other commonly associated improvements such as increased air tightness and improved water management (Hutcheon 1964, Lstiburek 2007). The intent of the meeting was to review the current state of industry knowledge regarding cladding attachment over exterior insulation with a specific focus on: 1. Gravity load resistance, 2. Wind load resistance. The presentations explore these topics from an engineering design, laboratory testing, field monitoring, as well as practical construction perspective. By bringing various groups together (who have been conduction research or have experience in this area), a more holistic review of the design limits and current code language proposals can be completed and additional gaps identified. The results of which will help inform design standards and criteria.

  10. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, A.F.; Malba, V.

    1999-08-03

    An attachment method for stacked integrated circuit (IC) chips is disclosed. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM. 12 figs.

  11. Attachment method for stacked integrated circuit (IC) chips

    DOE Patents [OSTI]

    Bernhardt, Anthony F.; Malba, Vincent

    1999-01-01

    An attachment method for stacked integrated circuit (IC) chips. The method involves connecting stacked chips, such as DRAM memory chips, to each other and/or to a circuit board. Pads on the individual chips are rerouted to form pads on the side of the chip, after which the chips are stacked on top of each other whereby desired interconnections to other chips or a circuit board can be accomplished via the side-located pads. The pads on the side of a chip are connected to metal lines on a flexible plastic tape (flex) by anisotropically conductive adhesive (ACA). Metal lines on the flex are likewise connected to other pads on chips and/or to pads on a circuit board. In the case of a stack of DRAM chips, pads to corresponding address lines on the various chips may be connected to the same metal line on the flex to form an address bus. This method has the advantage of reducing the number of connections required to be made to the circuit board due to bussing; the flex can accommodate dimensional variation in the alignment of chips in the stack; bonding of the ACA is accomplished at low temperature and is otherwise simpler and less expensive than solder bonding; chips can be bonded to the ACA all at once if the sides of the chips are substantially coplanar, as in the case for stacks of identical chips, such as DRAM.

  12. Nevada Test Site Environmental Report 2007 Attachment A: Site Description

    SciTech Connect (OSTI)

    Cathy Wills

    2008-09-01

    This appendix expands on the general description of the Nevada Test Site (NTS) presented in the Introduction to the Nevada Test Site Environmental Report 2007 (U.S. Department of Energy [DOE], 2008). Included are subsections that summarize the site's geological, hydrological, climatological, and ecological setting. The cultural resources of the NTS are also presented. The subsections are meant to aid the reader in understanding the complex physical and biological environment of the NTS. An adequate knowledge of the site's environment is necessary to assess the environmental impacts of new projects, design and implement environmental monitoring activities for current site operations, and assess the impacts of site operations on the public residing in the vicinity of the NTS. The NTS environment contributes to several key features of the site which afford protection to the inhabitants of adjacent areas from potential exposure to radioactivity or other contaminants resulting from NTS operations. These key features include the general remote location of the NTS, restricted access, extended wind transport times, the great depths to slow-moving groundwater, little or no surface water, and low population density. This attachment complements the annual summary of monitoring program activities and dose assessments presented in the main body of this report.

  13. Million U.S. Housing Units Total............................................................................

    U.S. Energy Information Administration (EIA) Indexed Site

    Attached 2 to 4 Units Table HC2.12 Home Electronics Usage Indicators by Type of Housing Unit, 2005 5 or More Units Mobile Homes Type of Housing Unit Housing Units (millions) Single-Family Units Apartments in Buildings With-- Home Electronics Usage Indicators Detached Energy Information Administration: 2005 Residential Energy Consumption Survey: Preliminary Housing Characteristics Tables Million U.S. Housing Units Attached 2 to 4 Units Table HC2.12 Home Electronics Usage Indicators by Type of

  14. DE-SOL-0008449 Attachment L-2b

    National Nuclear Security Administration (NNSA)

    A. is defined as management of international projects with project size of 1M to ... D. Relevance to indicator D. is defined as provision, installation, integration, testing ...

  15. Determination of usage patterns and emissions for propane/LPG in California. Final report

    SciTech Connect (OSTI)

    Sullivan, M.

    1992-05-01

    The purpose of the study was to determine California usage patterns of Liquified Petroleum Gas (LPG), and to estimate propane emissions resulting from LPG transfer operations statewide, and by county and air basin. The study is the first attempt to quantify LPG transfer emissions for California. This was accomplished by analyzing data from a telephone survey of California businesses that use LPG, by extracting information from existing databases.

  16. VELOCITY INDICATOR FOR EXTRUSION PRESS

    DOE Patents [OSTI]

    Digney, F.J. Jr.; Bevilacqua, F.

    1959-04-01

    An indicator is presented for measuring the lowspeed velocity of an object in one direction where the object returns in the opposite direction at a high speed. The indicator comprises a drum having its axis of rotation transverse to the linear movement of the object and a tape wound upon the drum with its free end extending therefrom and adapted to be connected to the object. A constant torque is applied to the drum in a direction to wind the tape on the drum. The speed of the tape in the unwinding direction is indicated on a tachometer which is coupled through a shaft and clutch means to the drum only when the tape is unwinding.

  17. Prediction of substrate removal rates of attached microorganisms and of relative contributions of attached and suspended communities at field sites

    SciTech Connect (OSTI)

    Lewis, D.L.; Gattie, D.K.

    1988-02-01

    A mathematical model composed of a direct proportionality relationship between bulk water velocities and field-determined second-order microbial transformation rate coefficients, and the relative rate coefficient of a benchmark chemical, was developed for estimating the substrate removal rates of rapidly degraded chemicals by attached microorganisms in shallow (less than 1 m deep) aquatic ecosystems. Data from 31 field experiments involving the addition of 2,4-dichlorophenoxyacetic acid methyl ester (2,4-DME) in nine field areas were used to determine a field-derived second-order rate coefficient for microbial transformation of the ester. By using 2,4-DME as a benchmark chemical, the model was used to predict microbial transformation rates of the butoxyethyl ester of 2,4-dichlorophenoxyacetic acid (2,4-DBE) at five other field sites. The predicted half-lives of 2,4-DBE varied 1500-fold and were within about a 3-fold range or less of the measured half-lives.

  18. Attaching solar collectors to a structural framework utilizing a flexible clip

    DOE Patents [OSTI]

    Kruse, John S

    2014-03-25

    Methods and apparatuses described herein provide for the attachment of solar collectors to a structural framework in a solar array assembly. A flexible clip is attached to either end of each solar collector and utilized to attach the solar collector to the structural framework. The solar collectors are positioned to allow a member of the framework to engage a pair of flexible clips attached to adjacent solar collectors during assembly of the solar array. Each flexible clip may have multiple frame-engaging portions, each with a flange on one end to cause the flexible clip to deflect inward when engaged by the framework member during assembly and to guide each of the frame-engaging portions into contact with a surface of the framework member for attachment.

  19. Covariance propagation in spectral indices

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Griffin, P. J.

    2015-01-09

    In this study, the dosimetry community has a history of using spectral indices to support neutron spectrum characterization and cross section validation efforts. An important aspect to this type of analysis is the proper consideration of the contribution of the spectrum uncertainty to the total uncertainty in calculated spectral indices (SIs). This study identifies deficiencies in the traditional treatment of the SI uncertainty, provides simple bounds to the spectral component in the SI uncertainty estimates, verifies that these estimates are reflected in actual applications, details a methodology that rigorously captures the spectral contribution to the uncertainty in the SI, andmore » provides quantified examples that demonstrate the importance of the proper treatment the spectral contribution to the uncertainty in the SI.« less

  20. Covariance propagation in spectral indices

    SciTech Connect (OSTI)

    Griffin, P. J.

    2015-01-09

    In this study, the dosimetry community has a history of using spectral indices to support neutron spectrum characterization and cross section validation efforts. An important aspect to this type of analysis is the proper consideration of the contribution of the spectrum uncertainty to the total uncertainty in calculated spectral indices (SIs). This study identifies deficiencies in the traditional treatment of the SI uncertainty, provides simple bounds to the spectral component in the SI uncertainty estimates, verifies that these estimates are reflected in actual applications, details a methodology that rigorously captures the spectral contribution to the uncertainty in the SI, and provides quantified examples that demonstrate the importance of the proper treatment the spectral contribution to the uncertainty in the SI.

  1. " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Number of Establishments by Usage of General Energy-Saving Technologies, 2002;" " Level: National Data; " " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;" " Unit: Establishment Counts." " "," ",,"Computer Control of Building Wide Evironment(c)",,,"Computer Control of Processes or Major Energy-Using Equipment(d)",,,"Waste Heat Recovery",,,"Adjustable - Speed

  2. " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Number of Establishments by Usage of General Energy-Saving Technologies, 2006;" " Level: National Data; " " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;" " Unit: Establishment Counts." ,,,"Computer Control of Building Wide Evironment(c)",,,"Computer Control of Processes or Major Energy-Using Equipment(d)",,,"Waste Heat Recovery",,,"Adjustable - Speed Motors",,,"Oxy - Fuel

  3. " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;"

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Number of Establishments by Usage of General Energy-Saving Technologies, 2010;" " Level: National Data; " " Row: NAICS Codes;" " Column: Usage within General Energy-Saving Technologies;" " Unit: Establishment Counts." ,,,"Computer Control of Building Wide Evironment(c)",,,"Computer Control of Processes or Major Energy-Using Equipment(d)",,,"Waste Heat Recovery",,,"Adjustable - Speed Motors",,,"Oxy - Fuel

  4. EMP Attachment 3 DOE-SC PNNL Site Dose Assessment Guidance

    SciTech Connect (OSTI)

    Snyder, Sandra F.

    2011-12-21

    This Dose Assessment Guidance (DAG) describes methods to use to determine the Maximally-Exposed Individual (MEI) location and to estimate dose impact to that individual under the U.S. Department of Energy Office of Science (DOE-SC) Pacific Northwest National Laboratory (PNNL) Site Environmental Monitoring Plan (EMP). This guidance applies to public dose from radioactive material releases to the air from PNNL Site operations. This document is an attachment to the Pacific Northwest National Laboratory (PNNL) Environmental Monitoring Plan (EMP) and describes dose assessment guidance for radiological air emissions. The impact of radiological air emissions from the U.S. Department of Energy Office of Science (DOE-SC) PNNL Site is indicated by dose estimates to a maximally exposed member of the public, referred to as the maximally exposed individual (MEI). Reporting requirements associated with dose to members of the public from radiological air emissions are in 40 CFR Part 61.94, WAC 246-247-080, and DOE Order 458.1. The DOE Order and state standards for dose from radioactive air emissions are consistent with U.S. Environmental Protection Agency (EPA) dose standards in 40 CFR 61.92 (i.e., 10 mrem/yr to a MEI). Despite the fact that the current Contract Requirements Document (CRD) for the DOE-SC PNNL Site operations does not include the requirement to meet DOE CRD 458.1, paragraph 2.b, public dose limits, the DOE dose limits would be met when EPA limits are met.

  5. Low latency counter event indication

    DOE Patents [OSTI]

    Gara, Alan G.; Salapura, Valentina

    2010-08-24

    A hybrid counter array device for counting events with interrupt indication includes a first counter portion comprising N counter devices, each for counting signals representing event occurrences and providing a first count value representing lower order bits. An overflow bit device associated with each respective counter device is additionally set in response to an overflow condition. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits. An operatively coupled control device monitors each associated overflow bit device and initiates incrementing a second count value stored at a corresponding memory location in response to a respective overflow bit being set. The incremented second count value is compared to an interrupt threshold value stored in a threshold register, and, when the second counter value is equal to the interrupt threshold value, a corresponding "interrupt arm" bit is set to enable a fast interrupt indication. On a subsequent roll-over of the lower bits of that counter, the interrupt will be fired.

  6. Low latency counter event indication

    SciTech Connect (OSTI)

    Gara, Alan G.; Salapura, Valentina

    2008-09-16

    A hybrid counter array device for counting events with interrupt indication includes a first counter portion comprising N counter devices, each for counting signals representing event occurrences and providing a first count value representing lower order bits. An overflow bit device associated with each respective counter device is additionally set in response to an overflow condition. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits. An operatively coupled control device monitors each associated overflow bit device and initiates incrementing a second count value stored at a corresponding memory location in response to a respective overflow bit being set. The incremented second count value is compared to an interrupt threshold value stored in a threshold register, and, when the second counter value is equal to the interrupt threshold value, a corresponding "interrupt arm" bit is set to enable a fast interrupt indication. On a subsequent roll-over of the lower bits of that counter, the interrupt will be fired.

  7. Methods for attaching polymerizable ceragenins to water treatment membranes using amine and amide linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D.T.; Savage, Paul B.

    2013-10-15

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  8. Methods for attaching polymerizable ceragenins to water treatment membranes using silane linkages

    DOE Patents [OSTI]

    Hibbs, Michael; Altman, Susan J.; Jones, Howland D. T.; Savage, Paul B.

    2013-09-10

    This invention relates to methods for chemically grafting and attaching ceragenin molecules to polymer substrates; methods for synthesizing ceragenin-containing copolymers; methods for making ceragenin-modified water treatment membranes and spacers; and methods of treating contaminated water using ceragenin-modified treatment membranes and spacers. Ceragenins are synthetically produced antimicrobial peptide mimics that display broad-spectrum bactericidal activity. Alkene-functionalized ceragenins (e.g., acrylamide-functionalized ceragenins) can be attached to polyamide reverse osmosis membranes using amine-linking, amide-linking, UV-grafting, or silane-coating methods. In addition, silane-functionalized ceragenins can be directly attached to polymer surfaces that have free hydroxyls.

  9. Microsoft Word - MOD M229 FAR-DEAR Attach 1 - FINAL

    National Nuclear Security Administration (NNSA)

    Modification No. M229 Contract No. DE-AC54-00AL66620 Page No. 2 of 2 The purpose of this Modification is to incorporate the following: A. Replace Part III, LIST OF DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS, Section J - LIST OF ATTACHMENTS, Appendix A - PERSONNEL APPENDIX in its entirety to update REIMBURSEMENT AUTHORIZATIONS, TABLE OF CONTENTS, and to replace Section II. BENEFITS PROGRAM, B.4.e.(6), B.4.f.(4), and B.4.j.(1)(a)&(b) (See Attachment 1). B. Replace Part III - LIST OF DOCUMENTS,

  10. Remedial action plan and site design for stabilization of the inactive uranium processing site at Naturita, Colorado. Appendix B of Attachment 3: Groundwater hydrology report, Attachment 4: Water resources protection strategy, Final

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    Attachment 3 Groundwater Hydrology Report describes the hydrogeology, water quality, and water resources at the processing site and Dry Flats disposal site. The Hydrological Services calculations contained in Appendix A of Attachment 3, are presented in a separate report. Attachment 4 Water Resources Protection Strategy describes how the remedial action will be in compliance with the proposed EPA groundwater standards.

  11. INTEGRAL POSITIONING AND INDICATING DEVICE

    DOE Patents [OSTI]

    Frantz, C.E.; Cawley, W.E.; Warnick, R.F.

    1961-07-25

    A variable capacitor which may be used as an integral positioning and indicating device is descried. The apparatus comprises a hollow metal cylinder with a metal rod mounted fixedly along the axis thereof and insulated therefrom. A hollow shaft is slidably mounted between the cylinder and the rod in electrical connection with the cylinder and insulated from the rod. One end of the shaft is disposed between the cylinder and the rod and the other end extends therefrom and may be connected to an object whose position is to be monitored. Means are provided to move the hollow shaft by pressure fluid in the cylinder whereby the capacitance between the rod and the cylinder is varied and measurement of which is a function of the position of the hollow shaft.

  12. INDICATING, RECORDING, AND CONTROLLING APPARATUS

    DOE Patents [OSTI]

    Gregory, C.H.; Hall, J.

    1950-12-26

    An accurate and sensitive apparatus for indicating the difference between two fluid pressures is described. The specific device suspended from flexible strip type springs to control the fluid pressure in a main line. The mechanical linkage is biased in a position by the pressure from the two sources under measurement, the pressures acting in opposite directions on the linkage. A second pressure acts on the linkage derived from the main line, such that a change in the pressure differential between the two measured lines will move the linkage to change the valve flow, altering the main line pressure which in turn repositions the linkage. By metering the main line pressure, the pressure differential between the two lines is continuously monitored and measured.

  13. DE-EM-0001971 WIPP M&O J-15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    15 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D: SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT DE-EM-0001971 WIPP M&O J-16 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT D SPECIAL FINANCIAL INSTITUTION ACCOUNT AGREEMENT FOR USE WITH THE PAYMENTS CLEARED FINANCING ARRANGEMENT Agreement entered into this, _______ day of ___________, ________, between the UNITED

  14. DE-SOL-0002555 WIPP Solicitation J-23 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F: GUIDANCE FOR PREPARATION OF DIVERSITY PLAN DE-SOL-0002555 WIPP Solicitation J-24 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT F GUIDANCE FOR PREPARATION OF DIVERSITY PLAN (See Contract Clause entitled "Diversity Plan") This Guidance is to assist the Contractor in understanding the information being sought by the Department for each of the Diversity elements and

  15. Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

    Broader source: Energy.gov [DOE]

    Attached is Policy Flash 2013-34 Department of Energy Acquisition Letter 2013-04 on Executive Compensation

  16. Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation from Building America Webinar: High Performance Enclosure Strategies, Part II: Low-E Storm Windows and Window Attachments.

  17. Request for Proposal No. DE-SOL-0008418 SECTION L ATTACHMENT...

    National Nuclear Security Administration (NNSA)

    SECTION L ATTACHMENT H LETTER OF COMMITMENT I, INSERT NAME, hereby certify that the resume submitted with this letter is true and correct. I agree to accept the position of ...

  18. Understanding the Role of Solvation Forces on the Preferential Attachment of Nanoparticles in Liquid

    SciTech Connect (OSTI)

    Welch, David A.; Woehl, Taylor J.; Park, Chiwoo; Faller, Roland; Evans, James E.; Browning, Nigel D.

    2015-11-20

    We discuss optimization of colloidal nanoparticle synthesis techniques, which requires an understanding of underlying particle growth mechanisms. Nonclassical growth mechanisms are particularly important as they affect nanoparticle size and shape distributions, which in turn influence functional properties. For example, preferential attachment of nanoparticles is known to lead to the formation of mesocrystals, although the formation mechanism is currently not well-understood. Here we employ in situ liquid cell scanning transmission electron microscopy and steered molecular dynamics (SMD) simulations to demonstrate that the experimentally observed preference for end-to-end attachment of silver nanorods is a result of weaker solvation forces occurring at rod ends. In conclusion, SMD reveals that when the side of a nanorod approaches another rod, perturbation in the surface-bound water at the nanorod surface creates significant energy barriers to attachment. Additionally, rod morphology (i.e., facet shape) effects can explain the majority of the side attachment effects that are observed experimentally.

  19. PolFlash10-30_attach2.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    PolFlash10-30attach2.pdf More Documents & Publications FinancialAssistanceCertification-01.pdf PolFlash10-31.pdf PolFlash10-30.pdf...

  20. The Ductility of Human Jaw Bone Attached to a Tooth | Stanford...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Ductility of Human Jaw Bone Attached to a Tooth Saturday, May 31, 2014 In a bone-tooth ... of the tooth root and alveolar bone (human jaw bone) of the socket is permitted by an ...

  1. Usage of Electric Vehicle Supply Equipment Along the Corridors between the EV Project Major Cities

    SciTech Connect (OSTI)

    Mindy Kirkpatrick

    2012-05-01

    The report explains how the EVSE are being used along the corridors between the EV Project cities. The EV Project consists of a nationwide collaboration between Idaho National Laboratory (INL), ECOtality North America, Nissan, General Motors, and more than 40 other city, regional and state governments, and electric utilities. The purpose of the EV Project is to demonstrate the deployment and use of approximately 14,000 Level II (208-240V) electric vehicle supply equipment (EVSE) and 300 fast chargers in 16 major cities. This research investigates the usage of all currently installed EV Project commercial EVSE along major interstate corridors. ESRI ArcMap software products are utilized to create geographic EVSE data layers for analysis and visualization of commercial EVSE usage. This research locates the crucial interstate corridors lacking sufficient commercial EVSE and targets locations for future commercial EVSE placement. The results and methods introduced in this research will be used by INL for the duration of the EV Project.

  2. Lessons Learned from Dependency Usage in HERA: Implications for THERP-Related HRA Methods

    SciTech Connect (OSTI)

    April M. Whaley; Ronald L. Boring; Harold S. Blackman; Patrick H. McCabe; Bruce P. Hallbert

    2007-08-01

    Dependency occurs when the probability of success or failure on one action changes the probability of success or failure on a subsequent action. Dependency may serve as a modifier on the human error probabilities (HEPs) for successive actions in human reliability analysis (HRA) models. Discretion should be employed when determining whether or not a dependency calculation is warranted: dependency should not be assigned without strongly grounded reasons. Human reliability analysts may sometimes assign dependency in cases where it is unwarranted. This inappropriate assignment is attributed to a lack of clear guidance to encompass the range of scenarios human reliability analysts are addressing. Inappropriate assignment of dependency produces inappropriately elevated HEP values. Lessons learned about dependency usage in the Human Event Repository and Analysis (HERA) system may provide clarification and guidance for analysts using first-generation HRA methods. This paper presents the HERA approach to dependency assessment and discusses considerations for dependency usage in HRA, including the cognitive basis for dependency, direction for determining when dependency should be assessed, considerations for determining the dependency level, temporal issues to consider when assessing dependency, (e.g., considering task sequence versus overall event sequence, and dependency over long periods of time), and diagnosis and action influences on dependency.

  3. Microsoft Word - Attachment G1G 10-1-2012.docx

    Office of Environmental Management (EM)

    G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 (This page intentionally blank) Waste Isolation Pilot Plant Hazardous Waste Permit October 1, 2012 PERMIT ATTACHMENT G1G Page G1G-i ATTACHMENT G1 APPENDIX G TECHNICAL SPECIFICATIONS PANEL CLOSURE SYSTEM WASTE ISOLATION PILOT PLANT CARLSBAD, NEW MEXICO TABLE OF CONTENTS DIVISION 1 - GENERAL REQUIREMENTS

  4. Reusable, tamper-indicating seal

    DOE Patents [OSTI]

    Ryan, Michael J.

    1978-01-01

    A reusable, tamper-indicating seal comprises a drum confined within a fixed body and rotatable in one direction therewithin, the top of the drum constituting a tray carrying a large number of small balls of several different colors. The fixed body contains parallel holes for looping a seal wire therethrough. The base of the drums carries cams adapted to coact with cam followers to lock the wire within the seal at one angular position of the drum. A channel in the fixed body -- visible from outside the seal -- adjacent the tray constitutes a segregated location for a small plurality of the colored balls. A spring in the tray forces colored balls into the segregated location at one angular position of the drum, further rotation securing the balls in position and the wires in the seal. A wedge-shaped plough removes the balls from the segregated location, at a different angular position of the drum, the wire being unlocked at the same position. A new pattern of colored balls will appear in the segregated location when the seal is relocked.

  5. Prolonged cold storage of red blood cells by oxygen removal and additive usage

    DOE Patents [OSTI]

    Bitensky, M.W.; Yoshida, Tatsuro

    1998-08-04

    Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4 C storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4 C for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials. 8 figs.

  6. Prolonged cold storage of red blood cells by oxygen removal and additive usage

    DOE Patents [OSTI]

    Bitensky, Mark W.; Yoshida, Tatsuro

    1998-01-01

    Prolonged cold storage of red blood cells by oxygen removal and additive usage. A cost-effective, 4.degree. C. storage procedure that preserves red cell quality and prolongs post-transfusion in vivo survival is described. The improved in vivo survival and the preservation of adenosine triphosphate levels, along with reduction in hemolysis and membrane vesicle production of red blood cells stored at 4.degree. C. for prolonged periods of time, is achieved by reducing the oxygen level therein at the time of storage; in particular, by flushing the cells with an inert gas, and storing them in an aqueous solution which includes adenine, dextrose, mannitol, citrate ion, and dihydrogen phosphate ion, but no sodium chloride, in an oxygen-permeable container which is located in an oxygen-free environment containing oxygen-scavenging materials.

  7. Buildings Energy Data Book: 8.5 Federal Government Water Usage

    Buildings Energy Data Book [EERE]

    5 Federal Government Water Usage March 2012 8.5.1 Federal Water Consumption Intensity and Costs (Millions of Gallons) Agency Total Source(s): 164,382.9 536,301.9 3,129,134.9 52.5 FEMP, Annual Report to Congress on Federal Government Energy Management and Conservation Programs FY 2007, Table 9, p. 26, Jan. 2010. HUD 21.8 139.1 1,432.0 15.2 RRB 5.5 19.5 346.9 15.9 SSA 125.0 617.1 9,262.0 13.5 Archives 107.9 552.9 4,062.0 26.6 State 169.0 762.2 4,476.7 37.8 EPA 168.1 1,196.0 3,723.3 45.2 Treasury

  8. Tamper-indicating barcode and method

    DOE Patents [OSTI]

    Cummings, Eric B.; Even, Jr., William R.; Simmons, Blake A.; Dentinger, Paul Michael

    2005-03-22

    A novel tamper-indicating barcode methodology is disclosed that allows for detection of alteration to the barcode. The tamper-indicating methodology makes use of a tamper-indicating means that may be comprised of a particulate indicator, an optical indicator, a deformable substrate, and/or may be an integrated aspect of the barcode itself. This tamper-indicating information provides greater security for the contents of containers sealed with the tamper-indicating barcodes.

  9. Practical use of a carbon nanotube attached to a blunt apex in an atomic force microscope

    SciTech Connect (OSTI)

    Kuwahara, Masashi; Abe, Hidekazu; Tokumoto, Hiroshi; Shima, Takayuki; Tominaga, Junji; Fukuda, Hajime

    2004-03-15

    A carbon nanotube (CNT) was successfully attached to a base probe with a blunt apex and subsequently used as a probe for an atomic force microscope (AFM). This setup demonstrates high spatial resolution properties, plus an advantage: we were able to readily identify the loss of the CNT from the end of the probe by the resultant sudden drop in resolution. This design of probe is expected to feature yet another advantage: that of relative immunity to accidental collision compared to a CNT attached to a commercially available sharp tip. We also discuss the problems specific to CNT-attached probes, which are carbon contamination of the sample surface and artifact images formed at the edge of pit structures. We demonstrate that carbon contamination can be suppressed by a rubbing procedure before the scanning use, and that pit artifacts can be eliminated by optimizing the CNT length.

  10. On the Effect of Ramp Rate in Damage Accumulation of the CPV Die-Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N. S.; Silverman, T. J.; Kurtz, S. R.

    2012-06-01

    It is commonly understood that thermal cycling at high temperature ramp rates may activate unrepresentative failure mechanisms. Increasing the temperature ramp rate of thermal cycling, however, could dramatically reduce the test time required to achieve an equivalent amount of thermal fatigue damage, thereby reducing overall test time. Therefore, the effect of temperature ramp rate on physical damage in the CPV die-attach is investigated. Finite Element Model (FEM) simulations of thermal fatigue and thermal cycling experiments are made to determine if the amount of damage calculated results in a corresponding amount of physical damage measured to the die-attach for a variety of fast temperature ramp rates. Preliminary experimental results are in good agreement with simulations and reinforce the potential of increasing temperature ramp rates. Characterization of the microstructure and resulting fatigue crack in the die-attach suggest a similar failure mechanism across all ramp rates tested.

  11. Electron attachment to C{sub 2} fluorocarbon radicals at high temperature

    SciTech Connect (OSTI)

    Shuman, Nicholas S.; Miller, Thomas M.; Viggiano, Albert A.

    2013-11-14

    Thermal electron attachment to the radical species C{sub 2}F{sub 3} and C{sub 2}F{sub 5} has been studied over the temperature range 300–890 K using the Variable Electron and Neutral Density Attachment Mass Spectrometry technique. Both radicals exclusively undergo dissociative attachment to yield F{sup −}. The rate constant for C{sub 2}F{sub 5} shows little dependence over the temperature range, remaining ∼4 × 10{sup −9} cm{sup 3} s{sup −1}. The rate constant for C{sub 2}F{sub 3} attachment rises steeply with temperature from 3 × 10{sup −11} cm{sup 3} s{sup −1} at 300 K to 1 × 10{sup −9} cm{sup 3} s{sup −1} at 890 K. The behaviors of both species at high temperature are in agreement with extrapolations previously made from data below 600 K using a recently developed kinetic modeling approach. Measurements were also made on C{sub 2}F{sub 3}Br and C{sub 2}F{sub 5}Br (used in this work as precursors to the radicals) over the same temperature range, and, for C{sub 2}F{sub 5}Br as a function of electron temperature. The attachment rate constants to both species rise with temperature following Arrhenius behavior. The attachment rate constant to C{sub 2}F{sub 5}Br falls with increasing electron temperature, in agreement with the kinetic modeling. The current data fall in line with past predictions of the kinetic modeling approach, again showing the utility of this simplified approach.

  12. IRENA Renewable Energy Indicators | Open Energy Information

    Open Energy Info (EERE)

    Indicators Jump to: navigation, search Name Developing the IRENA Renewable Energy Indicators (Phase I) AgencyCompany Organization Worldwatch Institute Partner International...

  13. Energy Indicators for Sustainable Development: Guidelines and...

    Open Energy Info (EERE)

    Some indicators focus on the delivery of essential energy services for reducing poverty and improving living conditions, while other indicators focus on environmental...

  14. Simulation and Experiment of Thermal Fatigue in the CPV Die Attach: Preprint

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Kurtz, S.

    2012-05-01

    FEM simulation and accelerated thermal cycling have been performed for the CPV die attach. Trends in fatigue damage accumulation and equivalent test time are explored and found to be most sensitive to temperature ramp rate. Die attach crack growth is measured through cycling and found to be in excellent agreement with simulations of the inelastic strain energy accumulated. Simulations of an entire year of weather data provides for the relative ranking of fatigue damage between four cites as well as their equivalent accelerated test time.

  15. Stigma models: Testing hypotheses of how images of Nevada are acquired and values are attached to them

    SciTech Connect (OSTI)

    Jenkins-Smith, H.C.

    1994-12-01

    This report analyzes data from surveys on the effects that images associated with nuclear power and waste (i.e., nuclear images) have on people`s preference to vacation in Nevada. The analysis was stimulated by a model of imagery and stigma which assumes that information about a potentially hazardous facility generates signals that elicit negative images about the place in which it is located. Individuals give these images negative values (valences) that lessen their desire to vacation, relocate, or retire in that place. The model has been used to argue that the proposed Yucca Mountain high-level nuclear waste repository could elicit images of nuclear waste that would stigmatize Nevada and thus impose substantial economic losses there. This report proposes a revised model that assumes that the acquisition and valuation of images depend on individuals` ideological and cultural predispositions and that the ways in which new images will affect their preferences and behavior partly depend on these predispositions. The report tests these hypotheses: (1) individuals with distinct cultural and ideological predispositions have different propensities for acquiring nuclear images, (2) these people attach different valences to these images, (3) the variations in these valences are important, and (4) the valences of the different categories of images within an individual`s image sets for a place correlate very well. The analysis largely confirms these hypotheses, indicating that the stigma model should be revised to (1) consider the relevant ideological and cultural predispositions of the people who will potentially acquire and attach value to the image, (2) specify the kinds of images that previously attracted people to the host state, and (3) consider interactions between the old and potential new images of the place. 37 refs., 18 figs., 17 tabs.

  16. DE-EM-0001971 WIPP M&O J-8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 PART III - LIST OF DOCUMENTS, EXHIBITS AND OTHER ATTACHMENTS SECTION J ATTACHMENT C: DRAFT PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) DE-EM-0001971 WIPP M&O J-9 Draft PERFORMANCE EVALUATION AND MEASUREMENT PLAN (PEMP) OCTOBER 1 (2012) through SEPTEMBER 30, (2013) Contract No. DE- EM0001971 SECTION J ATTACHMENT C I. INTRODUCTION This Performance Evaluation and Measurement Plan (PEMP) provides a standard process for development, administration, and coordination of all phases of the

  17. Computer usage and national energy consumption: Results from a field-metering study

    SciTech Connect (OSTI)

    Desroches, Louis-Benoit; Fuchs, Heidi; Greenblatt, Jeffery; Pratt, Stacy; Willem, Henry; Claybaugh, Erin; Beraki, Bereket; Nagaraju, Mythri; Price, Sarah; Young, Scott

    2014-12-01

    The electricity consumption of miscellaneous electronic loads (MELs) in the home has grown in recent years, and is expected to continue rising. Consumer electronics, in particular, are characterized by swift technological innovation, with varying impacts on energy use. Desktop and laptop computers make up a significant share of MELs electricity consumption, but their national energy use is difficult to estimate, given uncertainties around shifting user behavior. This report analyzes usage data from 64 computers (45 desktop, 11 laptop, and 8 unknown) collected in 2012 as part of a larger field monitoring effort of 880 households in the San Francisco Bay Area, and compares our results to recent values from the literature. We find that desktop computers are used for an average of 7.3 hours per day (median = 4.2 h/d), while laptops are used for a mean 4.8 hours per day (median = 2.1 h/d). The results for laptops are likely underestimated since they can be charged in other, unmetered outlets. Average unit annual energy consumption (AEC) for desktops is estimated to be 194 kWh/yr (median = 125 kWh/yr), and for laptops 75 kWh/yr (median = 31 kWh/yr). We estimate national annual energy consumption for desktop computers to be 20 TWh. National annual energy use for laptops is estimated to be 11 TWh, markedly higher than previous estimates, likely reflective of laptops drawing more power in On mode in addition to greater market penetration. This result for laptops, however, carries relatively higher uncertainty compared to desktops. Different study methodologies and definitions, changing usage patterns, and uncertainty about how consumers use computers must be considered when interpreting our results with respect to existing analyses. Finally, as energy consumption in On mode is predominant, we outline several energy savings opportunities: improved power management (defaulting to low-power modes after periods of inactivity as well as power scaling), matching the rated power

  18. Dissociative Electron Attachment to Carbon Dioxide via the 8.2 eV Feshbach resonance

    SciTech Connect (OSTI)

    Slaughter, Dan; Adaniya, Hidihito; Rescigno, Tom; Haxton, Dan; Orel, Ann; McCurdy, Bill; Belkacem, Ali

    2011-08-17

    Momentum imaging experiments on dissociative electron attachment (DEA) to CO{sub 2} are combined with the results of ab initio calculations to provide a detailed and consistent picture of the dissociation dynamics through the 8.2 eV resonance, which is the major channel for DEA in CO{sub 2}. The present study resolves several puzzling misconceptions about this system.

  19. No-migration variance petition. Volume 3, Revision 1: Appendix B, Attachments A through D

    SciTech Connect (OSTI)

    Not Available

    1990-03-01

    Volume III contains the following attachments: TRUPACT-II content codes (TRUCON); TRUPACT-II chemical list; chemical compatibility analysis for Rocky Flats Plant waste forms (Appendix 2.10.12 of TRUPACT-II safety analysis report); and chemical compatibility analyses for waste forms across all sites.

  20. Protective interior wall and attaching means for a fusion reactor vacuum vessel

    DOE Patents [OSTI]

    Phelps, R.D.; Upham, G.A.; Anderson, P.M.

    1985-03-01

    The wall basically consists of an array of small rectangular plates attached to the existing walls with threaded fasteners. The protective wall effectively conceals and protects all mounting hardware beneath the plate array, while providing a substantial surface area that will absorb plasma energy.