National Library of Energy BETA

Sample records for usa numeric iso

  1. ISO 50001 Professional Assistance

    Office of Energy Efficiency and Renewable Energy (EERE)

    Qualified professionals provide organizations implementing ISO 50001 with the assurance that they are maximizing the benefits from use of the standard. Qualified professionals obtain certification to identify opportunities for meeting ISO 50001 requirements or to verify conformance to the standard.

  2. About ISO 50001

    Broader source: Energy.gov [DOE]

    The ISO 50001 energy management standard is an international framework for industrial plants, commercial facilities, or entire organizations to manage energy, including all aspects of procurement and use. The standard provides organizations and companies with technical and management strategies to increase energy efficiency, reduce costs, and improve environmental performance. ISO 50001 is a foundational requirement for Superior Energy Performance® (SEP™) certification.

  3. ISO 14000 environmental management standard

    SciTech Connect (OSTI)

    Block, M.R.

    1995-12-01

    National standards organizations around the world are developing an environmental management standard to help organizations address significant environmental aspects of their activities. This standard, designated ISO 14000, will provide guidance for environmental management systems: environmental audits: Environmental performance evaluation: Environmental labeling and life-cycle assessment. The environmental management system specification, the lynch-pin of ISO 14000, will be published as an international standard in early 1996. Audit documents will follow shortly thereafter. Although conformance to ISO 14000 will be voluntary, US multinational companies are likely to discover that failure to participate creates trade barriers in Europe. The Environmental Commission created by NAFTA also is considering whether to make adherence to ISO 14000 a condition of trade. This presentation will provide an understanding of the ISO process to create the standard, key elements of ISO 14000, and implications for US companies. Such an understanding will enable organizations to determine whether adoption of ISO 14000 is strategically sound.

  4. License Iso. CM35

    Office of Legacy Management (LM)

    License Iso. CM35 hUhUll4MhiM&POlltYll7~ llolh-thRqalStract Alolan&le, vlrghla Attoatlonl w. & 0. EutahlDon Pursuant to the Atanic Energy Act of 1954 and Section 40.21 or the Code of Federal Regulations, Title 10 - Atomic Energy, Chapter 1, Part 40 - Control of Sauce Haterid, you are hereby licensed to receive possession of and title to three hundred uwi l lght the term of this liceaee for pounda of refined eource material during 880 in meueb and demlopmt aotiritim MDool.atd lfltb

  5. About ISO 50001 and DOE

    Broader source: Energy.gov [DOE]

    ISO 50001 provides organizations with an internationally recognized framework for implementing an energy management system (EnMS). The standard addresses the following:

  6. ISO 50001 Energy Management Standard

    SciTech Connect (OSTI)

    2013-08-12

    This powerful standard from the International Organization for Standardization (ISO) provides an internationally recognized framework for organizations to voluntarily implement an energy management system.

  7. ISO certification | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Education Organization Contact Us ISO certification ISO ISO Certification The Princeton Plasma Physics Laboratory is ISO certified. ISO 14000 is a family of standards related to environmental management that exists to help organizations (a) minimize how their operations (processes etc.) negatively affect the environment (i.e. cause adverse changes to air, water, or land); (b) comply with applicable laws, regulations, and other environmentally oriented requirements, and (c) continually improve

  8. ISO New England, Incorporated | Open Energy Information

    Open Energy Info (EERE)

    Incorporated Jump to: navigation, search Name: ISO New England, Incorporated Place: Holyoke, MA References: SGIC1 This article is a stub. You can help OpenEI by expanding it. ISO...

  9. Information System Owner (ISO) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Owner (ISO) Information System Owner (ISO) startup-849805_960_720.jpg The Information System Owner (ISO) is responsible for every stage in the lifecycle of an information system, including: procurement development integration modification operation maintenance retirement The ISO is a key contributor in: developing system design specifications testing implementation Information System Owner Core Competency Training Worksheet (209.1 KB) More Documents & Publications Information System Security

  10. World Energy Use; ISO Standards that Can Help

    Broader source: Energy.gov (indexed) [DOE]

    standards that can help ISO 50001 on energy management systems ISO/IEC 13273 on common ter- minology for energy efficiency and renewable energy sources ISO 13065 on sustainability criteria for biofuels ISO/TC 257* on energy savings ISO 16344 on overall energy per- formance rating and certification of buildings ISO 16343 on expressing energy performance and for energy certifi- cation of buildings ISO 16346 on the assessment of overall building energy performance ISO 12655 on presentation of

  11. ISOs: The new antitrust regulators?

    SciTech Connect (OSTI)

    Raskin, D.B.

    1998-04-01

    Fear of seller market power in emerging electricity markets has led regulators to sanction use of independent system operators as private market police. A more restrained approach is likely to yield better results without the chilling effects of private regulation. This new industry regulatory paradigm has received little critical attention to date. This is unfortunate because ISO antitrust regulation raises serious legal and policy concerns. The California and New England Power Pool (NEPOOL) plans are quite intrusive. They require the ISO to make difficult distinctions between acceptable and unacceptable market behavior. They create considerable risk that desirable competitive behavior will be chilled and that market participants will incur significant explicit and implicit costs to meet regulatory requirements.

  12. Microsoft Word - ISO certification article.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NSTec Recommended for ISO Certification in Quality, Environmental Management Systems National Security Technologies (NSTec), the operating contractor for the Nevada Test Site (NTS), has achieved a recommendation for International Organization for Standardization (ISO) certification from Lloyds Registrar Quality Assurance (LRQA). The organization is presented for recognition in both Quality Management and Environmental Management systems. The three-year plan to receive the prestigious ISO 9001

  13. CSV to ISO XML metadata transformation tool

    Energy Science and Technology Software Center (OSTI)

    2009-08-01

    Django app for converting CSV records to XML metadata documents. This transformation from the metadata content model to parsed ISO XML documents allows for metadata integration into NGDS.

  14. Property:Iso3166Numeric | Open Energy Information

    Open Energy Info (EERE)

    + 004 + Albania + 008 + Algeria + 012 + American Samoa + 016 + Andorra + 020 + Angola + 024 + Anguilla + 660 + Antigua and Barbuda + 028 + Argentina + 032 + Armenia + 051 +...

  15. Property:EIA/861/IsoErcot | Open Energy Information

    Open Energy Info (EERE)

    IsoErcot Jump to: navigation, search Property Name ISOERCOT Property Type Boolean Description Indicates that the organization conducts operations in the ERCOT ISO region 1...

  16. DOE Promotion of ISO 50001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISO 50001 Energy Management Standard » DOE Promotion of ISO 50001 DOE Promotion of ISO 50001 The U.S. Department of Energy (DOE) played a critical role in developing ISO 50001-the world's first global energy management system standard. ISO 50001 promotes the widespread adoption of best practices and drives investment in energy efficiency. DOE actively supports its broad implementation to achieve powerful benefits to U.S. businesses and to the nation. Learn how various DOE offices are promoting

  17. Offshore Wind Power USA

    Broader source: Energy.gov [DOE]

    The Offshore Wind Power USA conference provides the latest offshore wind market updates and forecasts.

  18. QER- Comment of ISO New England, Inc.

    Broader source: Energy.gov [DOE]

    Attached please find comments from ISO New England President & CEO Gordon van Welie on the US Department of Energy’s Quadrennial Energy Review. If you are unable to open or access the attached PDF for whatever reason, please contact me at the number below. Thank you,

  19. Normal butane/iso-butane separation

    SciTech Connect (OSTI)

    Volles, W.K.; Cusher, N.A.

    1986-08-26

    This patent describes an improved pressure swing adsorption process for the separation of iso-butane from normal butane in an adsorption system having at least three adsorbent beds, each bed of which undergoes, on a cyclic basis and a processing sequence comprising: introducing a feed gas mixture of iso-butane and normal butane at an upper adsorption pressure to the feed end of the bed capable of selectively adsorbing normal butane as the more selectivity adsorbable component of the gas mixture. The iso-butane as the less readily adsorbable component passes through the bed and is discharged from the discharge end. The feed gas introduction is continued as a normal butane adsorption front is formed in the bed and passes through the bed from the feed end and breaks through at the discharge end of the bed, a portion of the iso-butane effluent stream thus discharged being diverted for passage as purge gas to another bed in the system; and countercurrently depressurizing the bed with release of gas from the feed end.

  20. World Energy Use: ISO Standards that Can Help | Department of...

    Office of Environmental Management (EM)

    World Energy Use: ISO Standards that Can Help This one-page flyer shows total world energy consumption of marketed energy by economic sector as well as a list of ISO standards that ...

  1. Getting Started with ISO 50001 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISO 50001 Energy Management Standard » Getting Started with ISO 50001 Getting Started with ISO 50001 Companies use an energy management system (EnMS) to establish the policies and procedures to systematically track, analyze, and improve energy efficiency. ISO 50001, the global energy management systems standard, specifies requirements for establishing, implementing, maintaining, and improving an EnMS. The standard is based upon the Plan-Do-Check-Act management system, which is familiar to many

  2. Superior Energy Performance: Getting the Most Value from ISO 50001 |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Superior Energy Performance: Getting the Most Value from ISO 50001 Superior Energy Performance: Getting the Most Value from ISO 50001 This presentation describes ISO 50001 and explains how Superior Energy Performance can help get the most value from implementation of an Energy Management Standard. Superior Energy Performance: Getting the Most Value from ISO 50001 (March 13, 2012) (1.73 MB) More Documents & Publications Becoming a Certified Practitioner or a Certified

  3. Promoting Strong ISO 50001 Outcomes with Supportive National Infrastructure

    SciTech Connect (OSTI)

    McKane, Aimee, T.; Siciliano, Graziella; de los Reyes, Pamela

    2015-08-04

    The ISO 50001 standard is a key mechanism for reducing greenhouse gas emissions and improving energy efficiency globally. An increasing number of companies are seeking certification, creating the need for personnel that are competent to conduct ISO 50001 certification audits. The growth of ISO 50001 is expected to accelerate as more companies integrate ISO 50001 into their corporate sustainability strategies and supplier requirements. Robust implementation of ISO 50001 represents an important tool for countries with climate change mitigation goals. Because of its dual focus on continual improvement of an organization’s energy management system (EnMS) and its energy performance improvement, ISO 50001 requires skills of both implementers and certification auditors that are not well-supported by current credentials and training. This paper describes an effort to address skill gaps of certification auditors, a critical factor to ensure that ISO 50001 implementations are robust and result in continued energy performance improvement. A collaboration of governments through the Energy Management Working Group (EMWG), formerly under Global Superior Energy Performance (GSEP), has formed to build workforce capacity for ISO 50001 certification audits. The EMWG is leading the development of an internationally-relevant certification scheme for ISO 50001 Lead Auditor that meets requirements for ISO/IEC 17024 accreditation and ISO 50003 for defining ISO 50001 Lead Auditor competency. Wider availability of competent ISO 50001 Lead Auditors will ultimately increase the impact and market value of ISO 50001 certification and improve consistency of ISO 50001 certification outcomes by establishing a standardized and high level of knowledge and skills globally.

  4. ISO 50001 Energy Management Standard | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technical Assistance » ISO 50001 Energy Management Standard ISO 50001 Energy Management Standard The ISO 50001 energy management standard is a proven framework for industrial facilities, commercial facilities, or entire organizations to manage energy-including all aspects of energy procurement and use. An energy management system establishes the structure and discipline to implement technical and management strategies that significantly cut energy costs and greenhouse gas emissions-and sustain

  5. SEP and ISO 50001 Certification Process | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and ISO 50001 Certification Process SEP and ISO 50001 Certification Process Superior Energy Performance logo Learn about the certification process for ISO 50001 global energy management systems standard. In addition, learn about the added requirements for Superior Energy Performance® (SEP(tm)) certification. The detailed steps and free online resources outlined below can help your facility reduce energy costs, whether your facility is ready for certification or just beginning to explore energy

  6. ISO 50001 Conformant Energy Management Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISO 50001 Conformant Energy Management Systems ISO 50001 Conformant Energy Management Systems Commercial Buildings Integration Project for the 2013 Building Technologies Office's Program Peer Review commlbldgs04_mckane_040213.pdf (1.09 MB) More Documents & Publications Becoming a Certified Practitioner or a Certified Energy Engineer The Do and Check Processes of an Energy Management System Superior Energy Performance: Getting the Most Value from ISO 50001

  7. ISO launches a project committee to develop an International...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a project committee to develop an International Standard for energy management ISO launches a project committee to develop an International Standard for energy management ...

  8. Property:EIA/861/IsoNe | Open Energy Information

    Open Energy Info (EERE)

    Type Boolean Description Indicates that the organization conducts operations in the New England ISO region 1 References "EIA Form EIA-861 Final Data File for 2010 - 861...

  9. Dr. Kelli Joseph, NYISO Representing the ISO-RTO Council

    Broader source: Energy.gov (indexed) [DOE]

    Kelli Joseph, NYISO Representing the ISO-RTO Council July 28, 2014 DOE Quadrennial Energy Review Gas Electric Interdependencies: Coordination Efforts, Regional Issues, and...

  10. Development of Numerical Simulation Capabilities for In Situ...

    Office of Scientific and Technical Information (OSTI)

    Numerical Simulation Capabilities for In Situ Heating of Oil Shale Hoda, Nazish ExxonMobil Upstream Research Company, Houston, TX, USA; Fang, Chen ExxonMobil Upstream Research...

  11. Lessons learned with ISO 14001 at DOE sites

    SciTech Connect (OSTI)

    Wilkinson, C. H., LLNL

    1998-03-01

    ISO 14001 is the international standard for environmental management systems (EMS). The standard applies the `plan, do, check, act` management system model to assure that the environmental impacts of operations are fully considered in planning and facility operations. ISO 14001 has grown in popularity in both the public and the private sector and has seen increasing utility within the U.S. Department of Energy (DOE). While there is no final DOE policy or requirement for ISO 14001 EMS implementation, ISO 14001 commands an active presence at many DOE sites. In general, the impetus for ISO 14001 in the DOE complex has been either an initiative by site management contractors to improve performance, or an actual requirement in the new management contracts for the sites. Several DOE sites now are committed to implement EMS`s in conformance with ISO 14001: Brookhaven National Laboratory (BNL), Hanford, Idaho National Engineering and Environmental Laboratory (INEEL), Kansas City Plant, Nevada Test Site, Savannah River Site (SRS), Waste Isolation Pilot Project (WIPP), West Valley. Several other DOE sites are expected to proceed in the near future with an EMS consistent with ISO 14001. However, not all sites are proceeding with an ISO 14001 EMS based on individual site business considerations. This paper describes the status of EMS implementation at these sites and identifies lessons learned that may be of use to other DOE sites.

  12. Vestas USA | Open Energy Information

    Open Energy Info (EERE)

    USA Jump to: navigation, search Name: Vestas USA Place: Rolling Meadows, Illinois Zip: IL 60008-4030 Sector: Wind energy Product: Vestas Wind Systems American arm. References:...

  13. United States: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    page. Country Profile Name United States Population 320,206,000 GDP Unavailable Energy Consumption 99.53 Quadrillion Btu 2-letter ISO code US 3-letter ISO code USA Numeric ISO...

  14. Improving (NEPA) the National Environmental Policy Act through ISO 14001

    SciTech Connect (OSTI)

    Wilkinson, C H

    1999-02-25

    Federal application of ISO 14001 and / or the EPA Code of Environmental Management Principles (CEMP) could substantially improve the mitigation and monitoring aspects of the NEPA process. In addition, application of those management systems could also enhance fulfillment of Section 101 goals of NEPA. An ISO 14001 Environmental Management System would provide for a plan to continually address and improve environmental aspects and impacts. The strong feedback and improvement loops in both CEMP and ISO 14001 would help strengthen this weakness of NEPA by providing a mechanism to foster excellent environmental action, not just more dusty paperwork.

  15. Complexation of americium with {alpha}-d-iso-saccharinate

    SciTech Connect (OSTI)

    Allard, S.; Knutsson, A.; Oedegaard-Jensen, A.; Ekberg, C.; Jolsteraa, R.

    2008-07-01

    Under alkaline conditions, cellulose will degrade, with iso-saccharinate being the dominant end-product. One of the formed diastereomers, the {alpha}-D-iso-saccharinate, is a strong complexing agent for tri- and tetravalent actinides and is the dominant conformation at pH > 5, rendering other conformations insignificant at neutral to alkaline conditions. The presence of {alpha}-D-iso-saccharinate increases the amount of metal in solution and also affects the surface interactions. Understanding this complexation is of relevance for long-term repository assessments. This study has investigated the complexation of americium with {alpha}-D-iso-saccharinate using solvent-extraction and radioanalytical techniques at 25 deg. C. The stability constants for the complexation reactions were determined by curve fitting of a distribution-ratio equation to experimental data.

  16. Property:EIA/861/IsoOther | Open Energy Information

    Open Energy Info (EERE)

    another ISO region other than choices listed. 1 References "EIA Form EIA-861 Final Data File for 2010 - 861 Webfile Layout for 2010.doc" Pages using the property "EIA861...

  17. Technical Assistance to ISO's and Grid Operators For Loads Providing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ancillary Services To Enhance Grid Reliability | Department of Energy Technical Assistance to ISO's and Grid Operators For Loads Providing Ancillary Services To Enhance Grid Reliability Technical Assistance to ISO's and Grid Operators For Loads Providing Ancillary Services To Enhance Grid Reliability Project demonstrates and promotes the use of responsive load to provide ancillary services; helps ISOsand grid operators understand the resource and how best to apply it. Technical Assistance to

  18. Solar Unlimited USA | Open Energy Information

    Open Energy Info (EERE)

    USA Jump to: navigation, search Logo: Solar Unlimited USA Name: Solar Unlimited USA Address: 2353 Park Ave. Place: Cedar City, Utah Zip: 84721 Region: Rockies Area Sector: Solar...

  19. Geo processors USA | Open Energy Information

    Open Energy Info (EERE)

    processors USA Jump to: navigation, search Name: Geo-processors USA Place: California Zip: 91204 Sector: Carbon Product: California based Geo-procesors USA has developed an...

  20. Implementation of ISO140001 at the Savannah River Site

    SciTech Connect (OSTI)

    Marra, S.L.; Reeves, R.D.

    1998-04-20

    The Department of Energy`s Savannah River Site (SRS) in Aiken, SC recently received ISO14001 certification. ISO14001 is an internationally recognized standard that delineates the elements of an effective environmental management system (EMS) and enhances environmental stewardship. SRS preparations for ISO14001 certification involved a comparison of existing programs to the requirements of the standard. Gaps in the program were identified and work initiated to fill those gaps. Primarily, these deficiencies were related to documentation of the SRS EMS and employee training. Certification was granted after an extensive review by a team of independent auditors. The review included personnel interviews, documentation reviews, and work practice observations. An overview of the preparation process as well as the independent review will be presented.

  1. Launching the chaotic realm of iso-fractals: A short remark

    SciTech Connect (OSTI)

    O'Schmidt, Nathan; Katebi, Reza; Corda, Christian

    2015-03-10

    In this brief note, we introduce the new, emerging sub-discipline of iso-fractals by highlighting and discussing the preliminary results of recent works. First, we note the abundance of fractal, chaotic, non-linear, and self-similar structures in nature while emphasizing the importance of studying such systems because fractal geometry is the language of chaos. Second, we outline the iso-fractal generalization of the Mandelbrot set to exemplify the newly generated Mandelbrot iso-sets. Third, we present the cutting-edge notion of dynamic iso-spaces and explain how a mathematical space can be iso-topically lifted with iso-unit functions that (continuously or discretely) change; in the discrete case examples, we mention that iteratively generated sequences like Fibonaccis numbers and (the complex moduli of) Mandelbrots numbers can supply a deterministic chain of iso-units to construct an ordered series of (magnified and/or de-magnified) iso-spaces that are locally iso-morphic. Fourth, we consider the initiation of iso-fractals with Inopins holographic ring (IHR) topology and fractional statistics for 2D and 3D iso-spaces. In total, the reviewed iso-fractal results are a significant improvement over traditional fractals because the application of Santillis iso-mathematics arms us an extra degree of freedom for attacking problems in chaos. Finally, we conclude by proposing some questions and ideas for future research work.

  2. Application to Export Electric Energy OE Docket No. EA-298 ISO...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ISO New England Inc.: Federal Register Notice Volume 69, No. 218 - Nov. 12, 2004 Application to Export Electric Energy OE Docket No. EA-298 ISO New England Inc.: Federal Register ...

  3. SEP and ISO 50001 at 3M Canada's Brockville Plant | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and ISO 50001 at 3M Canada's Brockville Plant SEP and ISO 50001 at 3M Canada's Brockville Plant Superior Energy Performance logo This presentation by 3M Canada discusses their successes implementing an ISO 50001 Energy Management System and participating in the Superior Energy Performance® (SEP(tm)) program at their Brockville, Ontario Tape Manufacturing facility. SEP and ISO 50001 at 3M Canada's Brockville Plant, 2014 (2.54 MB) More Documents & Publications Energy Efficiency: A Competitive

  4. LNG Exports by Vessel in ISO Containers out of the U.S. Form | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy in ISO Containers out of the U.S. Form LNG Exports by Vessel in ISO Containers out of the U.S. Form LNG Exports by Vessel in ISO Containers Form (Excel) (41 KB) LNG Exports by Vessel in ISO Containers Form (pdf) (22.11 KB) More Documents & Publications LNG Exports by Vessel out of the U.S. Form LNG Imports by Vessel into the U.S. Form LNG Exports by Truck

  5. LAPD Madison, Wisconsin USA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 th LAPD Madison, Wisconsin USA Sunday, 22 September 2013 Varsity Hall III, Union South 18:00-20:00 Reception and Registration Monday, 23 September 2013 Session I (8:30-12:30) Varsity Hall III, Union South Chairs: J-P. Booth, E. E. Scime Time Speaker Title Index 7:30-8:30 Continental Breakfast 8:30-8:45 D. J. Den Hartog Welcome 8:45-9:35 N. C. Luhmann, Jr. Millimeter Wave and THz Plasma Diagnostic Development AK (1) 9:35-10:00 L. Lin Laser-Based Faraday-Effect Measurement of Magnetic

  6. Arlington, VA 22209 USA

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    22209 USA Phone: (703) 522-0086 * Fax: (703) 522-0548 Email: governmentaffairs@hpba.org Web Site: www.hpba.org Before the Department of Energy Docket No. EERE-2014-BT-STD-0036 RIN 1904-AD35 Hearth, Patio, and Barbecue Association's Supplemental Request for Extension of Comment Period on Proposed Energy Conservation Standard for "Hearth Products" 80 Fed. Reg. 7082 (February 9, 2015) March 31, 2015 The Hearth, Patio & Barbecue Association ("HPBA") has already requested

  7. Worldwide Energy and Manufacturing USA Inc formerly Worldwide...

    Open Energy Info (EERE)

    and Manufacturing USA Inc formerly Worldwide Manufacturing USA Jump to: navigation, search Name: Worldwide Energy and Manufacturing USA Inc (formerly Worldwide Manufacturing USA)...

  8. Scheuten Solar USA Inc | Open Energy Information

    Open Energy Info (EERE)

    USA Inc Jump to: navigation, search Name: Scheuten Solar USA, Inc. Place: Rancho Santa Margarita, California Zip: 92688 Sector: Solar Product: Manufacturer of Solar PV systems...

  9. Energy Pro USA | Open Energy Information

    Open Energy Info (EERE)

    Pro USA Jump to: navigation, search Name: Energy Pro USA Place: Chesterfield, Missouri Zip: MO 63017 Product: Energy Pro funds and implements demand side energy savings programs to...

  10. Windkraft Nord USA | Open Energy Information

    Open Energy Info (EERE)

    Nord USA Jump to: navigation, search Name: Windkraft Nord USA Place: San Diego, California Zip: 92122 Product: Subsidiary of WKN AG based in North America. References: Windkraft...

  11. Solar Millennium LLC USA | Open Energy Information

    Open Energy Info (EERE)

    LLC USA Jump to: navigation, search Name: Solar Millennium LLC (USA) Place: Berkeley, California Sector: Solar Product: California-based STEG power plant developer, parabolic...

  12. Coaltec Energy USA Inc | Open Energy Information

    Open Energy Info (EERE)

    Coaltec Energy USA Inc Jump to: navigation, search Name: Coaltec Energy USA, Inc. Place: Carterville, Illinois Zip: 62918 Sector: Biomass Product: Coaltec Energy provides energy...

  13. Think Solar USA | Open Energy Information

    Open Energy Info (EERE)

    Solar USA Jump to: navigation, search Name: Think Solar USA Product: Maker, installer and distributor of parabolic trough STEG power and hot water systems. References: Think Solar...

  14. Energy Optimizers USA | Open Energy Information

    Open Energy Info (EERE)

    Optimizers USA Jump to: navigation, search Name: Energy Optimizers USA Address: 6 S. 3rd Street Place: Tipp City, Ohio Zip: 45371 Sector: Biomass, Carbon, Geothermal energy,...

  15. AREA USA LLC | Open Energy Information

    Open Energy Info (EERE)

    AREA USA LLC Jump to: navigation, search Name: AREA USA LLC Place: Washington, DC Zip: 20004 Sector: Services Product: Washington, D.C.-based division of Fabiani & Company...

  16. Usina Santo Angelo USA | Open Energy Information

    Open Energy Info (EERE)

    Santo Angelo USA Jump to: navigation, search Name: Usina Santo Angelo (USA) Place: Pirajuba, Minas Gerais, Brazil Product: Minas Gerais-based ethanol and energy producer company....

  17. BROAD USA Inc | Open Energy Information

    Open Energy Info (EERE)

    BROAD USA Inc Jump to: navigation, search Name: BROAD USA, Inc Place: Hackensack, New Jersey Zip: 7601 Product: BROAD manufactures absorption chillers powered by clean and...

  18. Norvento USA LLC | Open Energy Information

    Open Energy Info (EERE)

    USA LLC Jump to: navigation, search Name: Norvento USA LLC Place: Boston, Massachusetts Product: Boston-based engineering consultancy and division of Norvento SA. Coordinates:...

  19. Sharp Electronics Corporation USA | Open Energy Information

    Open Energy Info (EERE)

    Electronics Corporation USA Jump to: navigation, search Name: Sharp Electronics Corporation (USA) Place: Huntington Beach, California Zip: 92647 Product: North American division of...

  20. Communication - An Effective Tool for Implementing ISO 14001/EMS

    SciTech Connect (OSTI)

    Rachel Damewood; Bowen Huntsman

    2004-04-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) received ISO 14001/EMS certification in June 2002. Communication played an effective role in implementing ISO 14001/EMS at the INEEL. This paper describes communication strategies used during the implementation and certification processes. The INEEL achieved Integrated Safety Management System (ISMS) and Voluntary Protection Program (VPP) Star status in 2001. ISMS implemented a formal process to plan and execute work. VPP facilitated worker involvement by establishing geographic units at various facilities with employee points of contact and management champions. The INEEL Environmental Management System (EMS) was developed to integrate the environmental functional area into its ISMS and VPP. Since the core functions of ISMS, VPP, and EMS are interchangeable, they were easy to integrate. Communication is essential to successfully implement an EMS. (According to ISO 14001 requirements, communication interacts with 12 other elements of the requirements.) We developed communication strategies that integrated ISMS, VPP, and EMS. For example, the ISMS, VPP, and EMS Web sites communicated messages to the work force, such as “VPP emphasizes the people side of doing business, ISMS emphasizes the system side of doing business, and EMS emphasizes the systems to protect the environment; but they all define work, identify and analyze hazards, and mitigate the hazards.” As a result of this integration, the work force supported and implemented the EMS. In addition, the INEEL established a cross-functional communication team to assist with implementing the EMS. The team included members from the Training and Communication organizations, VPP office, Pollution Prevention, Employee and Media Relations, a union representative, facility environmental support, and EMS staff. This crossfunctional team used various communication strategies to promote our EMS to all organization levels and successfully implemented EMS

  1. ISO 14000 information platform. Quarterly report, January 1--March 31, 1998

    SciTech Connect (OSTI)

    1998-09-01

    GETE, through its ISO 14000 Information Platform, globeNet{trademark} (www.iso14000.net), seeks to provide FETC and the US Department of Energy (DOE) with a timely, accurate, and reliable information resource on the issue of environmental management standards. This resource allows FETC to keep track of the latest developments in the ISO 14000 arena, in DOE as well as throughout the federal complex and industry. Utilizing this information, FETC and DOE can make critical decisions on their own use and implementation of the ISO 14000 standards. The information platform also provides FETC with a forum to present information on its activities, such as the DOE ISO 14000 Pilot Projects, and as an information gathering and dissemination resource for its publications. GETE works with an array of national and international contacts and content sources to gather information and provide daily updates on ISO 14000 and related environmental management issues.

  2. Application to Export Electric Energy OE Docket No. EA-298 ISO New England

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inc.: Federal Register Notice Volume 69, No. 218 - Nov. 12, 2004 | Department of Energy ISO New England Inc.: Federal Register Notice Volume 69, No. 218 - Nov. 12, 2004 Application to Export Electric Energy OE Docket No. EA-298 ISO New England Inc.: Federal Register Notice Volume 69, No. 218 - Nov. 12, 2004 Application from ISO New England Inc. to export electric energy to Canada. Federal Register Notice Vol 69 No 218 Application to Export Electric Energy OE Docket No.EA-298 ISO New England

  3. 3M and Schneider Electric Implement ISO 50001 and Superior Energy...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... ISO 50001 is the international standard for energy management systems, a recognized framework to help industrial and commercial organizations manage and improve energy performance. ...

  4. Absolute Energy USA | Open Energy Information

    Open Energy Info (EERE)

    USA Jump to: navigation, search Name: Absolute Energy (USA) Place: St. Ansgar, Iowa Zip: 50472 Product: Absolute Energy has built a 100 million gallon per year ethanol plant on the...

  5. PNE Wind USA Inc | Open Energy Information

    Open Energy Info (EERE)

    USA Inc Jump to: navigation, search Name: PNE Wind USA Inc Place: Chicago, Illinois Zip: 60601 Sector: Wind energy Product: Chicago-based subsidiary of wind farm project developer,...

  6. Hisense USA: Order (2010-CE-1211)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE issued an Order after entering into a Compromise Agreement with Hisense USA Corp. after finding Hisense USA had failed to certify that certain models of residential refrigerators, refrigerator-freezers, and freezers comply with the applicable energy conservation standards.

  7. OTB USA Inc | Open Energy Information

    Open Energy Info (EERE)

    OTB USA Inc Jump to: navigation, search Name: OTB USA Inc Address: 1871 Suffolk Rd. Place: Columbus, Ohio Zip: 43221 Sector: Solar Product: Other:Capital Equipment Phone Number:...

  8. USA Manufacturing: Order (2013-CE-5336)

    Broader source: Energy.gov [DOE]

    DOE ordered USA Manufacturing to pay a $8,000 civil penalty after finding USA Manufacturing had failed to certify that certain models of walk-in cooler and freezer components comply with the applicable energy conservation standards.

  9. FRONIUS USA LLC | Open Energy Information

    Open Energy Info (EERE)

    48116 USA, Michigan Sector: Solar Product: Focused on welding machines and solar inverters. References: FRONIUS USA LLC1 This article is a stub. You can help OpenEI by...

  10. Euro Chef USA: Order (2014-CE-23004)

    Broader source: Energy.gov [DOE]

    DOE ordered Euro Chef USA Inc. to pay a $8,000 civil penalty after finding Euro Chef USA had failed to certify that certain models of cooking products comply with the applicable energy conservation standards.

  11. LNG Imports by Vessel in ISO Containers into the U.S. | Department of

    Office of Environmental Management (EM)

    Rail into the U.S. LNG Imports by Rail into the U.S. LNG Imports by Rail Form (Excel) (54.5 KB) LNG Imports by Rail Form (pdf) (11.21 KB) More Documents & Publications LNG Imports by Truck into the U.S. Form LNG Imports by Vessel into the U.S. Form LNG Exports by Truck out of the U.S. Form Energy

    in ISO Containers into the U.S. LNG Imports by Vessel in ISO Containers into the U.S. LNG Imports by Vessel in ISO Containers Form (Excel) (41 KB) LNG Imports by Vessel in ISO Containers Form

  12. ISO launches a project committee to develop an International Standard for

    Broader source: Energy.gov (indexed) [DOE]

    energy management | Department of Energy American National Standards Institute (ANSI) approved the formation of a U.S. Technical Advisory Group (US TAG) to the ISO Project Committee 242. The TAG is a mechanism for identifying issues and developing national consensus regarding energy management. Read this announcement for more details about the group's charge and how to participate. ISO launches a project committee to develop an International Standard for energy management (April 2008)

  13. DOE Congestion Workshop, San Diego, December 15, 2011 Comments from California ISO

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Congestion Workshop, San Diego, December 15, 2011 Comments from California ISO U.S. Department of Energy National Electric Transmission Congestion Study Workshop San Diego, December 15, 2011 Questions from DOE and Comments from the California ISO Panelists have been asked to address the following questions, with emphasis as each panelist deems appropriate: 1) In its 2009 Congestion Study, DOE found that Southern California constitutes a Critical Congestion Area, that the Portland-Seattle region

  14. Post-accelerator issues at the IsoSpin Laboratory

    SciTech Connect (OSTI)

    Chattopadhyay, S.; Nitschke, J.M.

    1994-05-01

    The workshop on ``Post-Accelerator Issues at the Isospin Laboratory`` was held at the Lawrence Berkeley Laboratory from October 27--29, 1993. It was sponsored by the Center for Beam Physics in the Accelerator and Fusion Research Division and the ISL Studies Group in the Nuclear Science Division. About forty scientists from around the world participated vigorously in this two and a half day workshop, (c.f. Agenda, Appendix D). Following various invited review talks from leading practitioners in the field on the first day, the workshop focussed around two working groups: (1) the Ion Source and Separators working group and (2) the Radio Frequency Quadrupoles and Linacs working group. The workshop closed with the two working groups summarizing and outlining the tasks for the future. This report documents the proceedings of the workshop and includes the invited review talks, the two summary talks from the working groups and individual contributions from the participants. It is a complete assemblage of state-of-the-art thinking on ion sources, low-{beta}, low(q/A) accelerating structures, e.g. linacs and RFQS, isobar separators, phase-space matching, cyclotrons, etc., as relevant to radioactive beam facilities and the IsoSpin Laboratory. We regret to say that while the fascinating topic of superconducting low-velocity accelerator structure was covered by Dr. K. Shepard during the workshop, we can only reproduce the copies of the transparencies of his talk in the Appendix, since no written manuscript was available at the time of publication of this report. The individual report have been catologed separately elsewhere.

  15. H2USA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USA H2USA In 2013 many auto manufacturers announced fuel cell electric vehicle (FCEV) commercialization plans; Toyota, Hyundai, General Motors, Honda, Mercedes/Daimler, and others have committed to putting FCEVs on the road, some as early as the 2015-2017 timeframe. While the cars are coming, hydrogen infrastructure remains the greatest challenge to commercialization of FCEVs. To address this challenge, in 2013 DOE, along with automakers and other key stakeholders, launched H2USA, a new

  16. The Autoignition of iso-Cetane: Shock Tube Experiments and Kinetic Modeling

    SciTech Connect (OSTI)

    Oehlschlaeger, M A; Steinberg, J; Westbrook, C K; Pitz, W J

    2009-02-25

    Iso-cetane (2,2,4,4,6,8,8-heptamethylnonane, C{sub 16}H{sub 34}) is a highly branched alkane reference compound for determining cetane ratings. It is also a candidate branched alkane representative in surrogate mixtures for diesel and jet fuels. Here new experiments and kinetic modeling results are presented for the autoignition of iso-cetane at elevated temperatures and pressures relevant to combustion in internal combustion engines. Ignition delay time measurements were made in reflected shock experiments in a heated shock tube for {Phi} = 0.5 and 1.0 iso-cetane/air mixtures at temperatures ranging from 953 to 1347 K and pressures from 8 to 47 atm. Ignition delay times were measured using electronically excited OH emission, monitored through the shock tube end wall, and piezoelectric pressure transducer measurements, made at side wall locations. A new kinetic mechanism for the description of the oxidation of iso-cetane is presented that is developed based on a previous mechanism for iso-octane. Computed results from the mechanism are found in good agreement with the experimental measurements. To our knowledge, the ignition time measurements and detailed kinetic mechanism for isocetane presented here are the first of their kind.

  17. Coordination of Retail Demand Response with Midwest ISO Markets

    SciTech Connect (OSTI)

    Bharvirkar, Ranjit; Bharvirkar, Ranjit; Goldman, Charles; Heffner, Grayson; Sedano, Richard

    2008-05-27

    The Organization of Midwest ISO States (OMS) launched the Midwest Demand Resource Initiative (MWDRI) in 2007 to identify barriers to deploying demand response (DR) resources in the Midwest Independent System Operator (MISO) region and develop policies to overcome them. The MWDRI stakeholders decided that a useful initial activity would be to develop more detailed information on existing retail DR programs and dynamic pricing tariffs, program rules, and utility operating practices. This additional detail could then be used to assess any"seams issues" affecting coordination and integration of retail DR resources with MISO's wholesale markets. Working with state regulatory agencies, we conducted a detailed survey of existing DR programs, dynamic pricing tariffs, and their features in MISO states. Utilities were asked to provide information on advance notice requirements to customers, operational triggers used to call events (e.g. system emergencies, market conditions, local emergencies), use of these DR resources to meet planning reserves requirements, DR resource availability (e.g., seasonal, annual), participant incentive structures, and monitoring and verification (M&V) protocols. This report describes the results of this comprehensive survey and discusses policy implications for integrating legacy retail DR programs and dynamic pricing tariffs into organized wholesale markets. Survey responses from 37 MISO members and 4 non-members provided information on 141 DR programs and dynamic pricing tariffs with a peak load reduction potential of 4,727 MW of retail DR resource. Major findings of this study area:- About 72percent of available DR is from interruptible rate tariffs offered to large commercial and industrial customers, while direct load control (DLC) programs account for ~;;18percent. Almost 90percent of the DR resources included in this survey are provided by investor-owned utilities. - Approximately, 90percent of the DR resources are available with less than

  18. Sol-Up USA, LLC | Open Energy Information

    Open Energy Info (EERE)

    Sol-Up USA, LLC Jump to: navigation, search Logo: Sol-Up USA, LLC Name: Sol-Up USA, LLC Address: 3355 West Spring Mountain Road, Suite 3 Place: Las Vegas, NV Zip: 89102 Sector:...

  19. Application of Surface Analysis Methods to Nanomaterials: Summaryof ISO/TC 201 Technical Report: ISO 14187:2011 -Surface Chemical Analysis- Characterization of Nanomaterials

    SciTech Connect (OSTI)

    Baer, Donald R.

    2012-09-01

    ISO Technical Report (TR) 14187 provides an introduction to (and examples of) the information that can be obtained about nanostructured materials using surface-analysis tools. In addition, both general issues and challenges associated with characterising nanostructured materials and the specific opportunities and challenges associated with individual analytical methods are identified. As the size of objects or components of materials approaches a few nanometres, the distinctions among 'bulk', 'surface' and 'particle' analysis blur. This Technical Report focuses on issues specifically relevant to surface chemical analysis of nanostructured materials. The report considers a variety of analysis methods but focuses on techniques that are in the domain of ISO/TC 201 including Auger electron spectroscopy, X-ray photoelectron spectroscopy, secondary ion mass spectrometry, and scanning probe microscopy. Measurements of nanoparticle surface properties such as surface potential that are often made in a solution are not discussed.

  20. China Solar Clean Energy Solutions Inc formerly Deli Solar USA...

    Open Energy Info (EERE)

    Inc formerly Deli Solar USA Inc Jump to: navigation, search Name: China Solar & Clean Energy Solutions Inc ( formerly Deli Solar (USA) Inc) Place: Connecticut Zip: 6039 Sector:...

  1. Mitsubishi Electric and Electronics USA Inc | Open Energy Information

    Open Energy Info (EERE)

    and Electronics USA Inc Jump to: navigation, search Name: Mitsubishi Electric and Electronics USA Inc Place: Cypress, California Zip: 90630 Sector: Solar Product: Markets and...

  2. E ON Climate Renewables North America formerly Airtricity USA...

    Open Energy Info (EERE)

    Climate Renewables North America formerly Airtricity USA Jump to: navigation, search Name: E.ON Climate & Renewables North America (formerly Airtricity USA) Place: Chicago,...

  3. FRV USA formerly Fotowatio Renewable Ventures LLC | Open Energy...

    Open Energy Info (EERE)

    USA formerly Fotowatio Renewable Ventures LLC Jump to: navigation, search Name: FRV USA (formerly Fotowatio Renewable Ventures LLC) Place: San Francisco, California Zip: 94104...

  4. Calyxo USA Solar Fields LLC | Open Energy Information

    Open Energy Info (EERE)

    USA Solar Fields LLC Jump to: navigation, search Name: Calyxo USA (Solar Fields LLC) Place: Perrysburg, Ohio Zip: 43551 Sector: Solar Product: Producer of cadmium telluride...

  5. USA Science and Engineering Festival: Inspiring and Educating...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USA Science and Engineering Festival: Inspiring and Educating the Clean Energy Workforce of Tomorrow USA Science and Engineering Festival: Inspiring and Educating the Clean Energy...

  6. Acciona Wind Energy USA LLC | Open Energy Information

    Open Energy Info (EERE)

    USA LLC Jump to: navigation, search Name: Acciona Wind Energy USA LLC Place: Chicago, Illinois Zip: 60631 Sector: Wind energy Product: US wind farms developer subsidiary of Acciona...

  7. MOU signed between CIAE and Jefferson National Lab, USA. (China...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MOU signed between CIAE and Jefferson National Lab, USA. (China Nuclear Industry News, ... of Jefferson National Lab, USA visited the China Institute of Atomic Energy (CIAE). ...

  8. Macquarie Funds Management USA Inc | Open Energy Information

    Open Energy Info (EERE)

    Macquarie Funds Management USA Inc Jump to: navigation, search Name: Macquarie Funds Management (USA) Inc. Place: Carlsbad, California Zip: 92008 Product: Fund of funds arm of...

  9. MOU signed between CIAE and Jefferson National Lab, USA. (China...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    https:www.jlab.orgnewsarticlesmou-signed-between-cia...-and-jefferson-national-lab-usa-china-nuclear-industry-news-ge... ... USA visited the China Institute of Atomic Energy (CIAE). ...

  10. Naturener USA LLC formerly Great Plains Wind Energy | Open Energy...

    Open Energy Info (EERE)

    USA LLC formerly Great Plains Wind Energy Jump to: navigation, search Name: Naturener USA, LLC (formerly Great Plains Wind & Energy) Place: San Francisco, California Zip: 94111...

  11. HERA USA Inc formerly Ergenics Inc | Open Energy Information

    Open Energy Info (EERE)

    USA Inc (formerly Ergenics Inc) Place: Ringwood, New Jersey Zip: 7456 Sector: Hydro, Hydrogen Product: Ergenics is a USA based company with extensive experience in the development...

  12. Prediction of Regulation Reserve Requirements in California ISO Control Area based on BAAL Standard

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Makarov, Yuri V.; Samaan, Nader A.; Ma, Jian; Loutan, Clyde

    2013-07-21

    This paper presents new methodologies developed at Pacific Northwest National Laboratory (PNNL) to estimate regulation capacity requirements in the California ISO control area. Two approaches have been developed: (1) an approach based on statistical analysis of actual historical area control error (ACE) and regulation data, and (2) an approach based on balancing authority ACE limit control performance standard. The approaches predict regulation reserve requirements on a day-ahead basis including upward and downward requirements, for each operating hour of a day. California ISO data has been used to test the performance of the proposed algorithms. Results show that software tool allows saving up to 30% on the regulation procurements cost .

  13. ISO and US Standards for Thermal Cutting and Joint Preparation (U)

    SciTech Connect (OSTI)

    Kautz, D. [Los Alamos National Laboratory; Hochanadel, P. [Los Alamos National Laboratory

    2012-07-02

    The summary of this presentation is: (1) There is a lot of shared space between AWS and ISO documents; (2) Several areas use the same specifications and standards, especially true in process materials; and (3) Equipment is one area with very little overlap.

  14. Solar Systems USA | Open Energy Information

    Open Energy Info (EERE)

    up":"","inlineLabel":"","visitedicon":"" Hide Map References: Solar Systems USA Online Solar Panel Retailer1 This article is a stub. You can help OpenEI by expanding it. Solar...

  15. Hisense USA: Proposed Penalty (2010-CE-1211)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Hisense USA Corp. failed to certify a variety of residential refrigerators, refrigerator-freezers, and freezers as compliant with the applicable energy conservation standards.

  16. USA Manufacturing: Proposed Penalty (2013-CE-5336)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that USA Manufacturing failed to certify walk-in cooler or freezer components as compliant with the energy conservation standards.

  17. LES' URENCO-USA Facility | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    LES' URENCO-USA Facility LES' URENCO-USA Facility PowerPoint slides on LES's URENCO-USA Facility LES' URENCO-USA Facility (581.43 KB) More Documents & Publications 2014 Review of the Potential Impact of DOE Excess Uranium Inventory On the Commercial Markets Memorandum Memorializing Ex Parte Communication Report on the Effect the Low Enriched Uranium Delivered Under the Highly Enriched Uranium Agreement Between the USA and the Russian Federation has on the Domestic Uranium Mining, Conversion,

  18. Coal quality control in the context of international standards ISO 9000-2000

    SciTech Connect (OSTI)

    Freidina, E.V.; Botvinnik, A.A.; Dvornikova, A.N.

    2008-11-15

    The paper sets forth scientific foundations and organizational-technical environment offered by ISO 9000 standards that are oriented to product quality management and, thus, product quality planning. The authors describe the results of coal product quality planning with using the QFD methodology, present a model of coal quality control through the coal product life cycle and mining technologies. It is proposed to evaluate the quality management efficiency by the coefficient of concordance between the product quality and consumer's demands.

  19. Superior Energy Performance: Getting the Most Value from ISO 50001-Energy Management Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Superior Energy Performance cm : Getting the Most Value from ISO 50001- Energy Management Systems US Department of Energy Advanced Manufacturing Office March 13, 2012 Aimee McKane Lawrence Berkeley National Laboratory 2 | Industrial Energy Efficiency eere.energy.gov * Time and again, industrial energy efficiency has been demonstrated to be cost effective while having a positive effect on productivity * Despite this, energy efficiency improvements with very favorable payback periods often do not

  20. From waste minimization to ISO 14000: Taiwan`s experience and prospects

    SciTech Connect (OSTI)

    Wen-Huei Chen; Wain-Sun Hou

    1996-12-31

    Taiwan has completed a very successful five-year industrial waste minimization (IWM) demonstration and promotion project sponsored by the government. From 1990 to 1995, the project successfully disseminated the IWM concept of pollution prevention (P2) to industries. It effectively reduced industrial waste while significantly benefitting the economy by assisting industries in implementing in-plant IWM programs. In July 1995, the second stage of the five-year IWM and ISO 14000 promotion project was initiated for further promoting the IWM, P2, and cleaner production and, in particular, coping with the upcoming international environmental management standards (ISO 14000). To assist industries in establishing an environmental management system (EMS) and accumulating related experience, an EMS pilot demonstration project of five model industries and an ISO 14001 EMS demonstration and promotion project for 22 factories in 13 industries were initiated in October 1995 and August 1996, respectively. These projects can assist Taiwan`s industries in changing the constitution of their enterprises, enhancing competition in the international market, and helping our nation achieve the forerunner`s profits in sustainable development. 9 refs., 3 figs.

  1. Ignition properties of n-butane and iso-butane in a rapid compression machine

    SciTech Connect (OSTI)

    Gersen, S.; Darmeveil, J.H.; Mokhov, A.V.; Levinsky, H.B.

    2010-02-15

    Autoignition delay times of n-butane and iso-butane have been measured in a Rapid Compression Machine in the temperature range 660-1010 K, at pressures varying from 14 to 36 bar and at equivalence ratios {phi} = 1.0 and {phi} = 0.5. Both butane isomers exhibit a negative-temperature-coefficient (NTC) region and, at low temperatures, two-stage ignition. At temperatures below {proportional_to}900 K, the delay times for iso-butane are longer than those for the normal isomer, while above this temperature both butanes give essentially the same results. At temperatures above {proportional_to}720 K the delay times of the lean mixtures are twice those for stoichiometric compositions; at T < 720 K, the equivalence ratio is seen to have little influence on the ignition behavior. Increasing the pressure from 15 bar to 30 bar decreases the amplitude of the NTC region, and reduces the ignition delay time for both isomers by roughly a factor of 3. In the region in which two-stage ignition is observed, 680-825 K, the duration of the first ignition stage decreases sharply in the range 680-770 K, but is essentially flat above 770 K. Good quantitative agreement is found between the measurements and calculations for n-butane using a comprehensive model for butane ignition, including both delay times in the two-stage region, with substantial differences being observed for iso-butane, particularly in the NTC region. (author)

  2. North American Governments Announce Pilot Program to Accelerate Regional Adoption of the Energy Management Standard ISO 50001

    Broader source: Energy.gov [DOE]

    Today, energy ministries from Canada, Mexico, and the United States announced that nine companies will join the North American Energy Management Pilot Program to promote implementation of the ISO 50001 international energy management system standard.

  3. NORTH AMERICAN ISO 50001/SEP PILOT PROGRAM INFORMATIONAL WEBINAR, NOVEMBER 18, 2:30PM EASTERN TIME

    Broader source: Energy.gov [DOE]

    The U.S. DOE invites applications for a pilot program to help companies implement ISO 50001 and the Superior Energy Performance (SEP) program across multiple facilities throughout North America and...

  4. Ultra Soy of America DBA USA Biofuels | Open Energy Information

    Open Energy Info (EERE)

    Ultra Soy of America DBA USA Biofuels Jump to: navigation, search Name: Ultra Soy of America (DBA USA Biofuels) Place: Fort Wayne, Indiana Zip: 46898 Sector: Biofuels Product: An...

  5. DuraLamp USA: Order (2010-CE-0912)

    Broader source: Energy.gov [DOE]

    DOE ordered DuraLamp USA, Inc. to pay a $2,500 civil penalty after finding DuraLamp USA had failed to certify that model PAR 30, an incandescent reflector lamp, complies with the applicable energy conservation standards.

  6. Smeg USA: Order (2011-CE-14/1909)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE ordered Smeg USA, Inc. to pay a $6,000 civil penalty after finding Smeg USA had failed to certify that certain models of dishwashers and refrigerators comply with the applicable energy conservation standards.

  7. NATIONAL GEODATABASE OF TIDAL STREAM POWER RESOURCE IN USA

    SciTech Connect (OSTI)

    Smith, Brennan T; Neary, Vincent S; Stewart, Kevin M

    2012-01-01

    A geodatabase of tidal constituents is developed to present the regional assessment of tidal stream power resource in the USA. Tidal currents are numerically modeled with the Regional Ocean Modeling System (ROMS) and calibrated with the available measurements of tidal current speeds and water level surfaces. The performance of the numerical model in predicting the tidal currents and water levels is assessed by an independent validation. The geodatabase is published on a public domain via a spatial database engine with interactive tools to select, query and download the data. Regions with the maximum average kinetic power density exceeding 500 W/m2 (corresponding to a current speed of ~1 m/s), total surface area larger than 0.5 km2 and depth greater than 5 m are defined as hotspots and documented. The regional assessment indicates that the state of Alaska (AK) has the largest number of locations with considerably high kinetic power density, followed by, Maine (ME), Washington (WA), Oregon (OR), California (CA), New Hampshire (NH), Massachusetts (MA), New York (NY), New Jersey (NJ), North and South Carolina (NC, SC), Georgia (GA), and Florida (FL).

  8. EA-332 Nexen Marketing U.S.A. Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nexen Marketing U.S.A. Inc. EA-332 Nexen Marketing U.S.A. Inc. Order authorizing Nexen Marketing U.S.A. Inc. to export electric energy to Canada EA-332 Nexen Marketing U.S.A. Inc. ...

  9. Thinking Globally: How ISO 50001 - Energy Management can make industrial energy efficiency standard practice

    SciTech Connect (OSTI)

    McKane, Aimee; Desai, Deann; Matteini, Marco; Meffert, William; Williams, Robert; Risser, Roland

    2009-08-01

    Industry utilizes very complex systems, consisting of equipment and their human interface, which are organized to meet the production needs of the business. Effective and sustainable energy efficiency programs in an industrial setting require a systems approach to optimize the integrated whole while meeting primary business requirements. Companies that treat energy as a manageable resource and integrate their energy program into their management practices have an organizational context to continually seek opportunities for optimizing their energy use. The purpose of an energy management system standard is to provide guidance for industrial and commercial facilities to integrate energy efficiency into their management practices, including fine-tuning production processes and improving the energy efficiency of industrial systems. The International Organization for Standardization (ISO) has identified energy management as one of its top five priorities for standards development. The new ISO 50001 will establish an international framework for industrial, commercial, or institutional facilities, or entire companies, to manage their energy, including procurement and use. This standard is expected to achieve major, long-term increases in energy efficiency (20percent or more) in industrial, commercial, and institutional facilities and to reduce greenhouse gas (GHG) emissions worldwide.This paper describes the impetus for the international standard, its purpose, scope and significance, and development progress to date. A comparative overview of existing energy management standards is provided, as well as a discussion of capacity-building needs for skilled individuals to assist organizations in adopting the standard. Finally, opportunities and challenges are presented for implementing ISO 50001 in emerging economies and developing countries.

  10. ISO 50001 for Commercial Buildings: Lessons Learned From U.S. DOE Pilot Project: Preprint

    SciTech Connect (OSTI)

    Deru, M.; Field, K.; Punjabi, S.

    2014-08-01

    In the U.S., the ISO 50001 Standard, which establishes energy management systems (EnMSs) and processes, has shown uptake primarily in the industrial sector. The U.S. Department of Energy (DOE) undertook a pilot program to explore ISO 50001 implementation in commercial buildings. Eight organizations participated as pilots, with technical assistance provided by DOE, the National Renewable Energy Laboratory (NREL), the Lawrence Berkeley National Laboratory (LBNL), and the Georgia Institute of Technology (Georgia Tech). This paper shares important lessons learned from the pilot. Staff time was the most critical resource required to establish effective EnMSs in commercial buildings. The pilot also revealed that technical support and template/example materials were essential inputs. Crucial activities included evaluating performance, identifying goals, making connections, communicating operational controls, and tracking/reviewing progress. Benefits realized included enhanced intra-organizational connections, greater energy awareness, increased process efficiencies, and improved ability to make business cases. Incremental benefits for ISO 50001 certification were greater accountability, assurance of best practices, public relations opportunities, and potential to unlock verified savings credits or incentive money. Incremental certification costs included more staff/consultant time, money for certification, and a tendency to limit EnMS scope in order to ensure favorable audit results. Five best practices were identified - utilizing expert technical assistance, training, and other resources; focusing on implementation over documentation; keeping top management involved; considering organizational structure when selecting EnMS scope; and matching the implementation level to an EnMS's scope and scale. The last two practices are particularly relevant to the commercial buildings sector.

  11. Altos Hornos de Mexico blast furnace No. 5 certification in ISO-9002 standard

    SciTech Connect (OSTI)

    Gamez, O.; Liceaga, F.; Arredondo, J.

    1997-12-31

    Altos Hornos de Mexico`s Blast Furnace No. 5, as a means to improve its product quality, sought and obtained the certification of its quality system based on the international standard ISO-9002. The certification was obtained under this quality standard in Dec. 1995 and has successfully been maintained after two continuance audits. For blast furnace No. 5 (BF5) the benefits are reflected by a reduction in the hot metal silicon content variability, a decrease in fuel consumption and a higher productivity. Benefits were also obtained in the working environment where the personnel became more highly motivated, procedures were carried out to completion and the quality records were filled correctly.

  12. DOE Analysis Related to H2USA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Related to H2USA DOE Analysis Related to H2USA Download presentation slides from the DOE Fuel Cell Technologies Office webinar "DOE Analysis Related to H2USA" held on July 24, 2013. DOE Analysis Related to H2USA Webinar Slides (4.8 MB) More Documents & Publications National Fuel Cell and Hydrogen Energy Overview: Total Energy USA 2012 Fuel Cell Technologies Program Overview: 2012 DOE Polymer and Composite Materials Meetings Hydrogen and Fuel Cells Program Overview: 2014

  13. Experimental and Numerical Examination of the Thermal Transmittance of High Performance Window Frames

    SciTech Connect (OSTI)

    Gustavsen Ph.D., Arild; Goudey, Howdy; Kohler, Christian; Arasteh P.E., Dariush; Uvslokk, Sivert; Talev, Goce; Petter Jelle Ph.D., Bjorn

    2010-06-17

    While window frames typically represent 20-30percent of the overall window area, their impact on the total window heat transfer rates may be much larger. This effect is even greater in low-conductance (highly insulating) windows which incorporate very low conductance glazings. Developing low-conductance window frames requires accurate simulation tools for product research and development. The Passivhaus Institute in Germany states that windows (glazing and frames, combined) should have U-values not exceeding 0.80 W/(m??K). This has created a niche market for highly insulating frames, with frame U-values typically around 0.7-1.0 W/(m2 cdot K). The U-values reported are often based on numerical simulations according to international simulation standards. It is prudent to check the accuracy of these calculation standards, especially for high performance products before more manufacturers begin to use them to improve other product offerings. In this paper the thermal transmittance of five highly insulating window frames (three wooden frames, one aluminum frame and one PVC frame), found from numerical simulations and experiments, are compared. Hot box calorimeter results are compared with numerical simulations according to ISO 10077-2 and ISO 15099. In addition CFD simulations have been carried out, in order to use the most accurate tool available to investigate the convection and radiation effects inside the frame cavities. Our results show that available tools commonly used to evaluate window performance, based on ISO standards, give good overall agreement, but specific areas need improvement.

  14. ISO 18629 PSL : A Standardized Language for Specifying and Exchanging Process Information

    SciTech Connect (OSTI)

    Pouchard, Line Catherine; Cutting-Decelle, A. F.; Michel, Jean-Jacques; Gruninger, Michael

    2006-01-01

    As enterprise integration increases, developers face increasingly complex problems related to interoperability. When enterprises collaborate, a common frame of reference or at least a common terminology is necessary for human-to-human, human-to-machine, and machine-to-machine communication. Ontology engineering offers a direction towards solving the inter-operability problems brought about by semantic obstacles related to the definitions of business terms and software classes. Ontology engineering is a set of tasks related to the development of ontologies for a particular domain. This paper is aimed at presenting the approach of ISO 18629, i.e., the Process Specification Language (PSL), to this problem. In the first part, the architecture of the standard is described, with the main features of the language. Then, the problems of the interoperability with PSL and the conformance to the standard are presented. The paper ends with an example showing the use of the standard for interoperability.

  15. ISO test method to determine sustained-load-cracking resistance of aluminium cylinders

    SciTech Connect (OSTI)

    Bhuyan, G.S.; Rana, M.D.

    1999-08-01

    Leak as well as rupture types of failures related to sustained-load-cracking (SLC) have been observed in high-pressure gas cylinders fabricated from certain aluminium alloy. The stable crack growth mechanism observed primarily in the cylinder neck and shoulder area have been identified as the SLC mechanism occurring at room temperature without any environmental effect. The International Organization for standardization (ISO) Sub-Committee 3, Working Group 16 has developed a test method to measure the SLC resistance using fracture mechanics specimens along with an acceptance criterion for aluminium cylinders. The technical rationale for the proposed test method and the physical significance of the acceptance criterion to the cylinder performance in terms of critical stress-crack size relationship is presented. Application of the developed test method for characterizing new aluminium alloy for manufacturing cylinders is demonstrated. SLC characteristics of several aluminium cylinders as well as on-board cylinders for natural gas vehicles assessed by the authors are discussed.

  16. USA Biomass Power Producers Alliance | Open Energy Information

    Open Energy Info (EERE)

    Biomass Power Producers Alliance Jump to: navigation, search Name: USA Biomass Power Producers Alliance Place: Sacramento, California Sector: Biomass Product: National trade...

  17. International Energy Services USA Inc | Open Energy Information

    Open Energy Info (EERE)

    Inc Jump to: navigation, search Name: International Energy Services USA Inc Place: Washington, Washington, DC Sector: Renewable Energy Product: Owns various renewable energy...

  18. File:INL-geothermal-west-usa.pdf | Open Energy Information

    Open Energy Info (EERE)

    INL-geothermal-west-usa.pdf Jump to: navigation, search File File history File usage Western United States Geothermal Resources Size of this preview: 653 599 pixels. Other...

  19. Euro Chef USA: Proposed Penalty (2014-CE-23004)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that Euro Chef USA Inc. failed to certify cooking products as compliant with the applicable energy conservation standards.

  20. Ormat Technologies Inc. North Brawley, California USA | Open...

    Open Energy Info (EERE)

    Not Provided DOI Not Provided Check for DOI availability: http:crossref.org Online Internet link for Ormat Technologies Inc. North Brawley, California USA Citation Ormat...

  1. Support shape effect in metal oxide catalysis: ceria nanoshapes supported vanadia catalysts for oxidative dehydrogenation of iso-butane

    SciTech Connect (OSTI)

    Wu, Zili; Schwartz, Viviane; Li, Meijun; Rondinone, Adam Justin; Overbury, Steven {Steve} H

    2012-01-01

    The activation energy of VOx/CeO2 catalysts in oxidative dehydrogenation of iso-butane was found dependent on the shape of ceria support: rods < octahedra, closely related to the surface oxygen vacancy formation energy and defects amount of the two ceria supports with different crystallographic surface planes.

  2. Adsorption of iso-/n-butane on an Anatase Thin Film: A Molecular Beam Scattering and TDS Study

    SciTech Connect (OSTI)

    Goering, J.; Kadossov, E.; Burghaus, Uwe; Yu, Zhongqing; Thevuthasan, Suntharampillai; Saraf, Laxmikant V.

    2007-07-01

    Binding energies and adsorption probabilities have been determined for n/iso-butane adsorption on an anatase thin film grown on SrTiO3(001) by means of thermal desorption spectroscopy (TDS) and molecular beam scattering. The sample has been characterized by x-ray diffraction (XRD) and Auger electrons spectroscopy (AES).

  3. Direct Numerical Simulation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Direct Numerical Simulation - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced

  4. ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 ...

  5. EA-332-A Nexen Marketing U.S.A. Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -A Nexen Marketing U.S.A. Inc. EA-332-A Nexen Marketing U.S.A. Inc. Order authorizing Nexen Marketing U.S.A. Inc. to export electric energy to Canada EA-332-A Nexen Marketing ...

  6. Reply Comments of T-Mobile USA, Inc. | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    T-Mobile USA, Inc. Reply Comments of T-Mobile USA, Inc. T-Mobile USA, Inc. ("T-Mobile") hereby submits these reply comments in response to the above-captioned Request for ...

  7. Deputy Secretary Daniel Poneman USA Today Op-Ed September 13...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deputy Secretary Daniel Poneman USA Today Op-Ed September 13, 2011 Deputy Secretary Daniel Poneman USA Today Op-Ed September 13, 2011 PDF icon 091411Poneman USA Today op-ed.pdf...

  8. Numerical investigation of spontaneous flame propagation under RCCI conditions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bhagatwala, Ankit V; Sankaran, Ramanan; Kokjohn, Sage; Chen, Jacqueline H

    2015-06-30

    This paper presents results from one and two-dimensional direct numerical simulations under Reactivity Controlled Compression Ignition (RCCI) conditions of a primary reference fuel (PRF) mixture consisting of n-heptane and iso-octane. RCCI uses in-cylinder blending of two fuels with different autoignition characteristics to control combustion phasing and the rate of heat release. These simulations employ an improved model of compression heating through mass source/sink terms developed in a previous work by Bhagatwala et al. (2014), which incorporates feedback from the flow to follow a predetermined experimental pressure trace. Two-dimensional simulations explored parametric variations with respect to temperature stratification, pressure profiles andmore » n-heptane concentration. Furthermore, statistics derived from analysis of diffusion/reaction balances locally normal to the flame surface were used to elucidate combustion characteristics for the different cases. Both deflagration and spontaneous ignition fronts were observed to co-exist, however it was found that higher n-heptane concentration provided a greater degree of flame propagation, whereas lower n-heptane concentration (higher fraction of iso-octane) resulted in more spontaneous ignition fronts. A significant finding was that simulations initialized with a uniform initial temperature and a stratified n-heptane concentration field, resulted in a large fraction of combustion occurring through flame propagation. The proportion of spontaneous ignition fronts increased at higher pressures due to shorter ignition delay when other factors were held constant. For the same pressure and fuel concentration, the contribution of flame propagation to the overall combustion was found to depend on the level of thermal stratification, with higher initial temperature gradients resulting in more deflagration and lower gradients generating more ignition fronts. Statistics of ignition delay are computed to assess the Zel

  9. Numerical investigation of spontaneous flame propagation under RCCI conditions

    SciTech Connect (OSTI)

    Bhagatwala, Ankit V; Sankaran, Ramanan; Kokjohn, Sage; Chen, Jacqueline H

    2015-06-30

    This paper presents results from one and two-dimensional direct numerical simulations under Reactivity Controlled Compression Ignition (RCCI) conditions of a primary reference fuel (PRF) mixture consisting of n-heptane and iso-octane. RCCI uses in-cylinder blending of two fuels with different autoignition characteristics to control combustion phasing and the rate of heat release. These simulations employ an improved model of compression heating through mass source/sink terms developed in a previous work by Bhagatwala et al. (2014), which incorporates feedback from the flow to follow a predetermined experimental pressure trace. Two-dimensional simulations explored parametric variations with respect to temperature stratification, pressure profiles and n-heptane concentration. Furthermore, statistics derived from analysis of diffusion/reaction balances locally normal to the flame surface were used to elucidate combustion characteristics for the different cases. Both deflagration and spontaneous ignition fronts were observed to co-exist, however it was found that higher n-heptane concentration provided a greater degree of flame propagation, whereas lower n-heptane concentration (higher fraction of iso-octane) resulted in more spontaneous ignition fronts. A significant finding was that simulations initialized with a uniform initial temperature and a stratified n-heptane concentration field, resulted in a large fraction of combustion occurring through flame propagation. The proportion of spontaneous ignition fronts increased at higher pressures due to shorter ignition delay when other factors were held constant. For the same pressure and fuel concentration, the contribution of flame propagation to the overall combustion was found to depend on the level of thermal stratification, with higher initial temperature gradients resulting in more deflagration and lower gradients generating more ignition fronts. Statistics of ignition delay are computed to assess the Zel

  10. Confidence in Numerical Simulations

    SciTech Connect (OSTI)

    Hemez, Francois M.

    2015-02-23

    This PowerPoint presentation offers a high-level discussion of uncertainty, confidence and credibility in scientific Modeling and Simulation (M&S). It begins by briefly evoking M&S trends in computational physics and engineering. The first thrust of the discussion is to emphasize that the role of M&S in decision-making is either to support reasoning by similarity or to “forecast,” that is, make predictions about the future or extrapolate to settings or environments that cannot be tested experimentally. The second thrust is to explain that M&S-aided decision-making is an exercise in uncertainty management. The three broad classes of uncertainty in computational physics and engineering are variability and randomness, numerical uncertainty and model-form uncertainty. The last part of the discussion addresses how scientists “think.” This thought process parallels the scientific method where by a hypothesis is formulated, often accompanied by simplifying assumptions, then, physical experiments and numerical simulations are performed to confirm or reject the hypothesis. “Confidence” derives, not just from the levels of training and experience of analysts, but also from the rigor with which these assessments are performed, documented and peer-reviewed.

  11. Rythmos Numerical Integration Package

    Energy Science and Technology Software Center (OSTI)

    2006-09-01

    Rythmos numerically integrates transient differential equations. The differential equations can be explicit or implicit ordinary differential equations ofr formulated as fully implicit differential-algebraic equations. Methods include backward Euler, forward Euler, explicit Runge-Kutta, and implicit BDF at this time. Native support for operator split methods and strict modularity are strong design goals. Forward sensitivity computations will be included in the first release with adjoint sensitivities coming in the near future. Rythmos heavily relies on Thyra formore » linear algebra and nonlinear solver interfaces to AztecOO, Amesos, IFPack, and NOX in Tilinos. Rythmos is specially suited for stiff differential equations and thos applictions where operator split methods have a big advantage, e.g. Computational fluid dynamics, convection-diffusion equations, etc.« less

  12. DETAILED CHEMICAL KINETIC MODELING OF ISO-OCTANE SI-HCCI TRANSITION

    SciTech Connect (OSTI)

    Havstad, M A; Aceves, S M; McNenly, M J; Piggott, W T; Edwards, K D; Wagner, R M; Daw, C S; Finney, C A

    2009-10-12

    The authors describe a CHEMKIN-based multi-zone model that simulates the expected combustion variations in a single-cylinder engine fueled with iso-octane as the engine transitions from spark-ignited (ST) combustion to homogeneous charge compression ignition (HCCI) combustion. The model includes a 63-species reaction mechanism and mass and energy balances for the cylinder and the exhaust flow. For this study they assumed that the SI-to-HCCI transition is implemented by means of increasing the internal exhaust gas recirculation (EGR) at constant engine speed. This transition scneario is consistent with that implemented in previously reported experimental measurements on an experimental engine equipped with variable valve actuation. They find that the model captures many of the important experimental trends, including stable SI combustion at low EGR ({approx} 0.10), a transition to highly unstable combustion at intermediate EGR, and finally stable HCCI combustion at very high EGR ({approx} 0.75). Remaining differences between the predicted and experimental instability patterns indicate that there is further room for model improvement.

  13. Detailed Chemical Kinetic Modeling of Iso-octane SI-HCCI Transition

    SciTech Connect (OSTI)

    Havstad, Mark A; Aceves, Salvador M; McNenly, Matthew J; Piggott, William T; Edwards, Kevin Dean; Wagner, Robert M; Daw, C Stuart; FINNEY, Charles E A

    2010-01-01

    We describe a CHEMKIN-based multi-zone model that simulates the expected combustion variations in a single-cylinder engine fueled with iso-octane as the engine transitions from spark-ignited (SI) combustion to homogenous charge compression ignition (HCCI) combustion. The model includes a 63-species reaction mechanism and mass and energy balances for the cylinder and the exhaust flow. For this study we assumed that the SI-to-HCCI transition is implemented by means of increasing the internal exhaust gas recirculation (EGR) at constant engine speed. This transition scenario is consistent with that implemented in previously reported experimental measurements on an experimental engine equipped with variable valve actuation. We find that the model captures many of the important experimental trends, including stable SI combustion at low EGR (-0.10), a transition to highly unstable combustion at intermediate EGR, and finally stable HCCI combustion at very high EGR (-0.75). Remaining differences between the predicted and experimental instability patterns indicate that there is further room for model improvement.

  14. A comparison of numerical simulations and analytical theory of...

    Office of Scientific and Technical Information (OSTI)

    Department of Physics, Colorado State University, Fort Collins, Colorado 80523, USA Department of Physics, Bryn Mawr College, Bryn Mawr, Pennsylvania 19010, USA Department of ...

  15. DuraLamp USA: Proposed Penalty (2010-CE-0912)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that DuraLamp USA, Inc. failed to certify a variety of general service fluorescent lamps as compliant with the applicable energy conservation standards.

  16. Smeg USA: Proposed Penalty (2011-CE-14/1909)

    Office of Energy Efficiency and Renewable Energy (EERE)

    DOE alleged in a Notice of Proposed Civil Penalty that Smeg USA, Inc. failed to certify a variety of dishwashers and refrigerators as compliant with the applicable energy conservation standards.

  17. De'Longhi USA: Order (2010-CE-2114)

    Broader source: Energy.gov [DOE]

    DOE issued an Order after entering into a Compromise Agreement with De'Longhi USA, Inc. to resolve a case involving the failure to certify that a variety of dehumidifiers comply with the applicable energy conservation standards.

  18. De'Longhi USA: Proposed Penalty (2010-CE-2114)

    Broader source: Energy.gov [DOE]

    DOE alleged in a Notice of Proposed Civil Penalty that De'Longhi USA, Inc. failed to certify a variety of dehumidifiers as compliant with the applicable energy conservation standards.

  19. Chevron U.S.A. Inc.- 14-119-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an Application filed August 27, 2014 by Chevron U.S.A. Inc. (Chevron), requesting blanket authorization to export liquefied natural gas (LNG)...

  20. TianRun USA Inc | Open Energy Information

    Open Energy Info (EERE)

    Minnesota Sector: Wind energy Product: Minnesota-based investment arm of Goldwind Science & Technology, Beijing Tianrun invested USD 3m to set up the TianRun USA subsidiary in...

  1. Detailed chemical kinetic models for large n-alkanes and iso-alkanes found in conventional and F-T diesel fuels

    SciTech Connect (OSTI)

    Westbrook, C K; Pitz, W J; Curran, H J; Mehl, M

    2008-12-15

    Detailed chemical kinetic models are needed to simulate the combustion of current and future transportation fuels. These models should represent the various chemical classes in these fuels. Conventional diesel fuels are composed of n-alkanes, iso-alkanes, cycloalkanes and aromatics (Farrell et al. 2007). For future fuels, there is a renewed interest in Fischer-Tropsch (F-T) processes which can be used to synthesize diesel and other transportation fuels from biomass, coal and natural gas. F-T diesel fuels are expected to be similar to F-T jet fuels which are commonly comprised of iso-alkanes with some n-alkanes (Smith and Bruno, 2008). Thus, n-alkanes and iso-alkanes are common chemical classes in these conventional and future fuels. This paper reports on the development of chemical kinetic models of large n-alkanes and iso-alkanes to represent these chemical classes in conventional and future fuels. Two large iso-alkanes are 2,2,4,4,6,8,8-heptamethylnonane, which is a primary reference fuel for diesel, and isooctane, a primary reference fuel for gasoline. Other iso-alkanes are branched alkanes with a single methyl side chain, typical of most F-T fuels. The chemical kinetic models are then used to predict the effect of these fuel components on ignition characteristics under conditions found in internal combustion engines.

  2. H2USA Accomplishments Push Hydrogen Infrastructure Forward | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy H2USA Accomplishments Push Hydrogen Infrastructure Forward H2USA Accomplishments Push Hydrogen Infrastructure Forward April 21, 2015 - 4:47pm Addthis A fuel cell electric vehicle (FCEV) at a fueling station in California. A fuel cell electric vehicle (FCEV) at a fueling station in California. Sunita Satyapal Director, Fuel Cell Technologies Office In 2013, auto manufacturers started announcing fuel cell electric vehicle (FCEV) commercialization plans. Since then, Toyota, Hyundai,

  3. Director of Maintenance for USA Jet Airlines, Inc. | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration | (NNSA) Director of Maintenance for USA Jet Airlines, Inc. Rick A. Wilson Rick Wilson July 2009 U.S. General Services Administration (GSA) Aviation Maintenance Professional of the Year Rick A. Wilson has received the U.S. General Services Administration (GSA) Aviation Maintenance Professional of the Year award. Wilson is the director of maintenance for USA Jet Airlines, Inc., in Albuquerque. He manages the maintenance activity of seven different fleet aircraft for

  4. PROJECT PROFILE: Fraunhofer USA, Center for Sustainable Energy Systems CSE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (SHINES) | Department of Energy Fraunhofer USA, Center for Sustainable Energy Systems CSE (SHINES) PROJECT PROFILE: Fraunhofer USA, Center for Sustainable Energy Systems CSE (SHINES) Title: SunDial - An Integrated SHINES System to Enable High-Penetration Feeder-Level Photovoltaics Fraunhofer logo.png Funding Opportunity: Sustainable and Holistic Integration of Energy Storage and Solar PV SunShot Subprogram: Systems Integration Location: Boston, Massachusetts Partners: National Grid, EnerNOC

  5. Risk Assessment of Geologic Formation Sequestration in The Rocky Mountain Region, USA

    SciTech Connect (OSTI)

    Lee, Si-Yong; McPherson, Brian

    2013-08-01

    The purpose of this report is to describe the outcome of a targeted risk assessment of a candidate geologic sequestration site in the Rocky Mountain region of the USA. Specifically, a major goal of the probabilistic risk assessment was to quantify the possible spatiotemporal responses for Area of Review (AoR) and injection-induced pressure buildup associated with carbon dioxide (CO₂) injection into the subsurface. Because of the computational expense of a conventional Monte Carlo approach, especially given the likely uncertainties in model parameters, we applied a response surface method for probabilistic risk assessment of geologic CO₂ storage in the Permo-Penn Weber formation at a potential CCS site in Craig, Colorado. A site-specific aquifer model was built for the numerical simulation based on a regional geologic model.

  6. Nonpremixed ignition, laminar flame propagation, and mechanism reduction of n-butanol, iso-butanol, and methyl butanoate

    SciTech Connect (OSTI)

    Lu, Wei; Kelley, A. P.; Law, C. K.

    2011-01-01

    The non-premixed ignition temperature of n-butanol (CH{sub 3}CH{sub 2}CH{sub 2}CH{sub 2}OH), iso-butanol ((CH{sub 3}){sub 2}CHCH{sub 2}OH) and methyl butanoate (CH{sub 3}CH{sub 2}CH{sub 2}COOCH{sub 3}) was measured in a liquid pool assembly by heated oxidizer in a stagnation flow for system pressures of 1 and 3 atm. In addition, the stretch-corrected laminar flame speeds of mixtures of airn-butanol/iso-butanol/methyl butanoate were determined from the outwardly propagating spherical flame at initial pressures of up to 2 atm, for an extensive range of equivalence ratio. The ignition temperature and laminar flame speeds of n-butanol and methyl butanoate were computationally simulated with three recently developed kinetic mechanisms in the literature. Dominant reaction pathways to ignition and flame propagation were identified and discussed through a chemical explosive mode analysis (CEMA) and sensitivity analysis. The detailed models were further reduced through a series of systematic strategies. The reduced mechanisms provided excellent agreement in both homogeneous and diffusive combustion environments and greatly improved the computation efficiency.

  7. Numerical

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... saturation mechanism depends sensitively on the viscosity parameterized by Pm. ... A more thorough treatment of the dynamic variation of dominant eigenmodes can be found for ...

  8. FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System ...

  9. Solar World USA not SolarWorld AG | Open Energy Information

    Open Energy Info (EERE)

    World USA not SolarWorld AG Jump to: navigation, search Name: Solar World USA (not SolarWorld AG) Place: Colorado Springs, Colorado Zip: 80907 Sector: Solar Product: Solar World...

  10. SEMI-ANNUAL REPORTS FOR GASFIN DEVELOPMENT USA, LLC - FE DKT...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    GASFIN DEVELOPMENT USA, LLC - FE DKT. NO. 13-06-LNG - ORDER 3253 SEMI-ANNUAL REPORTS FOR GASFIN DEVELOPMENT USA, LLC - FE DKT. NO. 13-06-LNG - ORDER 3253 PDF icon April 2013 PDF ...

  11. Eni USA Gas Marketing LLC- FE Dkt. No.- 15-13-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an Application filed January 21, 2015 by Eni USA Gas Marketing LLC (ENI USA Gas Marketing), requesting blanket authorization to export...

  12. SEMI-ANNUAL REPORTS FOR PIERIDAE ENERGY (USA), LTD - DKT. NO...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PIERIDAE ENERGY (USA), LTD - DKT. NO. 14-179-LNG - ORDER 3639 SEMI-ANNUAL REPORTS FOR PIERIDAE ENERGY (USA), LTD - DKT. NO. 14-179-LNG - ORDER 3639 October 2015 (1.1 MB) April 2016 ...

  13. Upcoming H2USA Workshop: Hydrogen Fueling Station Component Listings

    Broader source: Energy.gov [DOE]

    H2USA will host an online workshop about hydrogen fueling station component listings on April 22 from 2 to 3:30 p.m. Eastern Daylight Time. This workshop will focus on the need for components for hydrogen fueling stations to be listed by Nationally Recognized Testing Laboratories (NRTLs).

  14. National Fuel Cell and Hydrogen Energy Overview: Total Energy USA 2012

    Office of Energy Efficiency and Renewable Energy (EERE)

    Presentation by Sunita Satyapal at the Total Energy USA 2012 meeting in Houston, Texas, on November 27, 2012.

  15. TESTING THE E {sub peak}-E {sub iso} RELATION FOR GRBs DETECTED BY SWIFT AND SUZAKU-WAM

    SciTech Connect (OSTI)

    Krimm, H. A.; Sakamoto, T.; Yamaoka, K.; Sugita, S.; Ohno, M.; Sato, G.; Hara, R.; Ohmori, N.; Tanaka, H.; Yamauchi, M.; Norris, J. P.; Onda, K.; Tashiro, M.

    2009-10-20

    One of the most prominent, yet controversial associations derived from the ensemble of prompt-phase observations of gamma-ray bursts (GRBs) is the apparent correlation in the source frame between the peak energy (E {sub peak}) of the nuF(nu) spectrum and the isotropic radiated energy, E {sub iso}. Since most GRBs have E {sub peak} above the energy range (15-150 keV) of the Burst Alert Telescope (BAT) on Swift, determining accurate E {sub peak} values for large numbers of Swift bursts has been difficult. However, by combining data from Swift/BAT and the Suzaku Wide-band All-Sky Monitor (WAM), which covers the energy range from 50 to 5000 keV, for bursts which are simultaneously detected, one can accurately fit E {sub peak} and E {sub iso} and test the relationship between them for the Swift sample. Between the launch of Suzaku in 2005 July and the end of 2009 April, there were 48 GRBs that triggered both Swift/BAT and WAM, and an additional 48 bursts that triggered Swift and were detected by WAM, but did not trigger. A BAT-WAM team has cross-calibrated the two instruments using GRBs, and we are now able to perform joint fits on these bursts to determine their spectral parameters. For those bursts with spectroscopic redshifts, we can also calculate the isotropic energy. Here, we present the results of joint Swift/BAT-Suzaku/WAM spectral fits for 91 of the bursts detected by the two instruments. We show that the distribution of spectral fit parameters is consistent with distributions from earlier missions and confirm that Swift bursts are consistent with earlier reported relationships between E {sub peak} and isotropic energy. We show through time-resolved spectroscopy that individual burst pulses are also consistent with this relationship.

  16. Technical basis for flawed cylinder test specification to assure adequate fracture resistance of ISO high-strength steel cylinder

    SciTech Connect (OSTI)

    Rana, M.D.; Smith, J.H.; Tribolet, R.O.

    1997-11-01

    High-pressure industrial gases (such as oxygen, nitrogen, argon, hydrogen, etc.) are stored and transported in portable cylinders. ISO TC58 SC3 has developed a draft specification 9809 for design and fabrication of high-pressure cylinders with maximum tensile strength limitation of 1,100 N/mm{sup 2}. In order to extend the ISO 9809 rules for higher than 1,100 N/mm{sup 2} strength level cylinders, a working group WG14 was formed in 1989 to develop new rules to assure adequate fracture resistance. In 1994, WG14 recommended a simple, but unique flawed cylinder test method for design qualification of the cylinder and acceptance criteria to assure adequate fracture resistance. WG14 also recommended Charpy-V-notch impact tests to control the required fracture resistance on production cylinders. This paper presents the technical basis that was employed in developing the flawed cylinder test method and acceptance criteria. The specification was developed for seamless steel cylinders having actual strength in the range of 1,100 to 1,400 N/mm{sup 2} and cylindrical section wall thickness in the range of 3 to 10 mm. Flawed cylinder tests were conducted on several hundred cylinders of varying sizes and strength levels. The specification requires to demonstrate LEAK-BEFORE-BREAK performance of the cylinder having flaw length equal to 1.6 (o.d. {times} t{sub design}){sup 0.5} at failure pressure = (t{sub design}/t{sub actual}) x Design Pressure.

  17. Technical basis for flawed cylinder test specification to assure adequate fracture resistance of ISO high strength steel cylinder

    SciTech Connect (OSTI)

    Rana, M.D.; Smith, J.H.; Tribolet, R.O.

    1996-12-01

    High pressure industrial gases (such as oxygen, nitrogen, argon, hydrogen, etc.) are stored and transported in portable cylinders. ISO TC58 SC3 has developed a draft specification 9809 for design and fabrication of high pressure cylinders with maximum tensile strength limitation of 1,100 N/mm{sup 2}. In order to extend the ISO 9809 rules for higher than 1,100 N/mm{sup 2} strength level cylinders, a working group WG14 was formed in 1989 to develop new rules to assure adequate fracture resistance. In 1994, WG14 recommended a simple, but unique flawed cylinder test method for design qualification of the cylinder and acceptance criteria to assure adequate fracture resistance. WG14 also recommended Charpy-V-Notch impact tests to control the required fracture resistance on production cylinders. This paper presents the technical basis that was employed in developing the flawed cylinder test method and acceptance criteria. The specification was developed for seamless steel cylinders having actual strength in the range of 1,100 to 1,400 N/mm{sup 2} and cylindrical section wall thickness in the range of 3mm to 10mm. Flawed cylinder tests were conducted on several hundred cylinders of varying sizes and strength levels. The specification requires to demonstrate LEAK-BEFORE-BREAK performance of the cylinder having flaw length equal to 1.6(O.D. {times} t{sub design}){sup 0.5} at failure pressure = (t{sub design}/t{sub actual}) {times} Design Pressure.

  18. Stephanie von Numers | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Stephanie von Numers - Communications and Web Coordinator, Education & Workforce Development Stephanie von Numers joined the U.S. Department of Energy's Office of Energy Efficiency ...

  19. 2012 USA Science & Engineering Festival | Princeton Plasma Physics Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    USA Science & Engineering Festival View larger image IMG 0658 View larger image IMG 0659 View larger image IMG 0664 View larger image IMG 0667 View larger image IMG 0682 View larger image IMG 0688 View larger image IMG 0698 View larger image IMG 0701 View larger image IMG 0696 View larger image IMG 0700 View larger image IMG 0712 View larger image IMG 0720 View larger image IMG 0729 View larger image IMG 0738 View larger image IMG 0735

  20. Teaching a new dog old tricks: the synergy of ISO 14000, NEPA, and integrated ES{ampersand}H management

    SciTech Connect (OSTI)

    Wilkinson, C.H.

    1997-03-01

    For more than twenty-five years, federal agencies have wrestled with (and even learned from) the planning and decision making processes of the National Environmental Policy Act (NEPA). Accordingly, agencies have developed established processes for environmental planning, impact assessment,and environmental-based decision making. Agencies are now faced with an opportunity to align existing environmental planning systems developed under NEPA with those of ISO 14001, the new international standard for environmental management systems. Through experience gained with NEPA, agencies may have an opportunity to assist the private sector through sharing of lessons learned in identification and mitigation of environmental aspects and impacts. However, agencies should also learn from the private sector how integrated environmental management includes integrating environment, safety, and health (ES&H) considerations in such away as to add direct value to the business. In times of continued and increasing federal agency downsizing, the government can streamline ES&H management planning by integrating ES&H values with business goals. The first synergy of NEPA and ISO 14001 is the identification and assessment of environmental impacts. Under IS0 14001,an organization must identify the `environmental aspects of its activities, products or services`. This is similar to the approach taken in NEPA where agencies must evaluate significant environmental impacts of its actions. The second synergy is the reduction and mitigation of the impacts. IS0 14001 requires a commitment to prevention of pollution and the NEPA process integrates pollution prevention with environmental planning. IS0 14001 requires checking and corrective action to monitor and measure progress toward environmental goals. NEPA applies mitigation measures to avoid or mitigate potential impacts. Because agencies have been conducting NEPA impact assessment for more than twenty-five years, this body of impact assessment

  1. ISO standardization of scaling factor method for low and intermediate level radioactive wastes generated at nuclear power plants

    SciTech Connect (OSTI)

    Kashiwagi, Makoto; Masui, Hideki; Denda, Yasutaka; James, David; Lantes, Bertrand; Mueller, Wolfgang; Garamszeghy, Mike; Leganes, Jose Luis; Maxeiner, Harald; Van Velzen, Leo

    2007-07-01

    Low- and intermediate-level radioactive wastes (L-ILW ) generated at nuclear power plants are disposed of in various countries. In the disposal of such wastes, it is required that the radioactivity concentrations of waste packages should be declared with respect to difficult-to-measure nuclides (DTM nuclides), such as C-14, Ni-63 and a-emitting nuclides, which are often limited to maximum values in disposal licenses, safety cases and/or regulations for maximum radioactive concentrations. To fulfill this requirement, the Scaling Factor method (SF method) has been applied in various countries as a principal method for determining the concentrations of DTM nuclides. In the SF method, the concentrations of DTM nuclides are determined by multiplying the concentrations of certain key nuclides by SF values (the determined ratios of radioactive concentration between DTM nuclides and those key nuclides). The SF values used as conversion factors are determined from the correlation between DTM nuclides and key nuclides such as Co-60. The concentrations of key nuclides are determined by {gamma} ray measurements which can be made comparatively easily from outside the waste package. The SF values are calculated based on the data obtained from the radiochemical analysis of waste samples. The use of SFs, which are empirically based on analytical data, has become established as a widely recognized 'de facto standard'. A number of countries have independently collected nuclide data by analysis over many years and each has developed its own SF method, but all the SF methods that have been adopted are similar. The project team for standardization had been organized for establishing this SF method as a 'de jure standard' in the international standardization system of the International Organization for Standardization (ISO). The project team for standardization has advanced the standardization through technical studies, based upon each country's study results and analysis data. The

  2. Disruptive Innovation in Numerical Hydrodynamics

    SciTech Connect (OSTI)

    Waltz, Jacob I.

    2012-09-06

    We propose the research and development of a high-fidelity hydrodynamic algorithm for tetrahedral meshes that will lead to a disruptive innovation in the numerical modeling of Laboratory problems. Our proposed innovation has the potential to reduce turnaround time by orders of magnitude relative to Advanced Simulation and Computing (ASC) codes; reduce simulation setup costs by millions of dollars per year; and effectively leverage Graphics Processing Unit (GPU) and future Exascale computing hardware. If successful, this work will lead to a dramatic leap forward in the Laboratory's quest for a predictive simulation capability.

  3. Application of ISO-TAG4 to the reporting of limit of error on the inventory difference

    SciTech Connect (OSTI)

    Murdock, C.; Suda, S.

    1993-07-01

    A standard reference does not exist for evaluating and expressing systematic and random uncertainty, thus, there is no basis for comparing measurement uncertainties at different facilities. Based on recommendations of the International Committee for Weights and Measures, the National Center for Standards and Certification Information, which is responsible for information on standardization programs and related activities, has published ISO-TAG4, Guide to the Expression of Uncertainty in Measurement (1993). The guide establishes general rules for evaluating and expressing uncertainty in physical measurements by presenting definitions, basic concepts and examples. it focuses on the methods of evaluating uncertainty components rather than categorizing the components, thus avoiding the ambiguity encountered when categorizing uncertainty components as ``random`` and ``systematic.`` This paper presents an overview of the terms specific to the guide, including standard and combined standard uncertainty, Type A and Type B evaluation, expanded uncertainty, and coverage factor. It illustrates Type A and Type B evaluation of random and systematic errors in forms relating to nuclear material accountability work. This guide could be adapted by the MC&A community.

  4. EXS-16-0012 - In the Matter of Siemens Medical Solutions USA Inc., Siemens

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Healthcare Diagnostics Inc. | Department of Energy 12 - In the Matter of Siemens Medical Solutions USA Inc., Siemens Healthcare Diagnostics Inc. EXS-16-0012 - In the Matter of Siemens Medical Solutions USA Inc., Siemens Healthcare Diagnostics Inc. On July 5, 2016, OHA granted an Application for Stay filed by Siemens Medical Solutions USA Inc. and Siemens Healthcare Diagnostics Inc. (Siemens) in which the firm requested a stay of enforcement of the applicable provisions of DOE's Energy

  5. MOU signed between CIAE and Jefferson National Lab, USA. (China Nuclear

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Industry News, General News) | Jefferson Lab MOU signed between CIAE and Jefferson National Lab, USA. (China Nuclear Industry News, General News) External Link: https://www.jlab.org/news/articles/mou-signed-between-ciae-and-jefferson-nationa... MOU signed between CIAE and Jefferson National Lab, USA. (News) Recently, the deputy director of Jefferson National Lab, USA visited the China Institute of Atomic Energy (CIAE). An MOU on the collaboration between the two institutions were signed

  6. Join us at the Inaugural USA Science and Engineering Festival! | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy us at the Inaugural USA Science and Engineering Festival! Join us at the Inaugural USA Science and Engineering Festival! October 22, 2010 - 12:00pm Addthis Director Brinkman Director Brinkman Director of the Office of Science What do smart windows and biofuels, climate models and gravity accelerators all have in common? They'll all be part of the Energy Department's exhibits at the inaugural USA Science and Engineering Festival on the National Mall this weekend. The festival

  7. Recent Photovoltaic Performance Data in the USA (Presentation)

    SciTech Connect (OSTI)

    Jordan, D.

    2014-03-01

    This paper presents performance data from nearly 50,000 Photovoltaic systems totaling 1.7 Gigawatts installed capacity in the USA from 2009 to 2012. 90% of the systems performed to within 10% or better of expected performance. Only 2-4% of the data indicate issues significantly affecting the system performance. Special causes of underperformance and their impacts are delineated by reliability category. Delays and interconnections dominate project-related issues particularly in the first year, but total less than 0.5% of all systems. Hardware-related issues are dominated by inverter problems totaling less than 0.4% and underperforming modules to less than 0.1%.

  8. DOW CHEMICAL U.S.A. + WESTERN DIVISION

    Office of Legacy Management (LM)

    DOW CHEMICAL U.S.A. + WESTERN DIVISION 2855 MITCHELL DRIVE WALNUT CREEK. CtyLlFORNlA 94598 October 29,1976 415 944-2300 (., L,'; ! - J. 022 . William J. Thornton Health Protection Branch Safety and Environmental Control Division U.S. Energy Research and Development Administration Oak Ridge Operations P. 0. Box E Oak Ridge, Tennessee 37830 Dear Mr. Thornton: This letter is in response to your request of September 24,1976 for information on records of radiological condition of the laboratories at

  9. Numerical computation of Pop plot

    SciTech Connect (OSTI)

    Menikoff, Ralph

    2015-03-23

    The Pop plot — distance-of-run to detonation versus initial shock pressure — is a key characterization of shock initiation in a heterogeneous explosive. Reactive burn models for high explosives (HE) must reproduce the experimental Pop plot to have any chance of accurately predicting shock initiation phenomena. This report describes a methodology for automating the computation of a Pop plot for a specific explosive with a given HE model. Illustrative examples of the computation are shown for PBX 9502 with three burn models (SURF, WSD and Forest Fire) utilizing the xRage code, which is the Eulerian ASC hydrocode at LANL. Comparison of the numerical and experimental Pop plot can be the basis for a validation test or as an aid in calibrating the burn rate of an HE model. Issues with calibration are discussed.

  10. OMAE2014 June 8-13, 2014, San Francisco, California, USA OMAE2014-24175

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proceedings of the ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering OMAE2014 June 8-13, 2014, San Francisco, California, USA OMAE2014-24175 Hydrodynamic Module Coupling in the Offshore Wind Energy Simulation (OWENS) Toolkit Matthew J. Fowler University of Maine Orono, Maine, U.S.A. Andrew J. Goupee University of Maine Orono, Maine, U.S.A. Brian Owens Sandia National Laboratories Albuquerque, New Mexico, U.S.A. John Hurtado Texas A&M University College

  11. Comparison of the ENERGYGAUGE USA and BEopt Building Energy Simulation Programs

    SciTech Connect (OSTI)

    Parker, Danny S.; Cummings, Jamie E.

    2009-08-01

    This report compares two hourly energy simulation softwares, BEopt and Energy Gauge USA, to ensure accuracy and evaluate agreement on the impact of various energy efficiency improvements.

  12. Interagency mechanical operations group numerical systems group

    SciTech Connect (OSTI)

    1997-09-01

    This report consists of the minutes of the May 20-21, 1971 meeting of the Interagency Mechanical Operations Group (IMOG) Numerical Systems Group. This group looks at issues related to numerical control in the machining industry. Items discussed related to the use of CAD and CAM, EIA standards, data links, and numerical control.

  13. WE-F-16A-01: Commissioning and Clinical Use of PC-ISO for Customized, 3D Printed, Gynecological Brachytherapy Applicators

    SciTech Connect (OSTI)

    Cunha, J; Sethi, R; Mellis, K; Siauw, T; Sudhyadhom, A; Hsu, I; Pouliot, J

    2014-06-15

    Purpose: (1) Evaluate the safety and radiation attenuation properties of PCISO, a bio-compatible, sterilizable 3D printing material by Stratasys, (2) establish a method for commissioning customized multi- and single-use 3D printed applicators, (3) report on use of customized vaginal cylinders used to treat a series of serous endometrial cancer patient. Methods: A custom film dosimetry apparatus was designed to hold a Gafchromic radio film segment between two blocks of PC-ISO and 3D-printed using a Fortus 400mc (StrataSys). A dose plan was computed using 13 dwell positions at 2.5 mm spacing and normalized to 1500 cGy at 1 cm. Film exposure was compared to control tests in only air and only water. The average Hounsfield Unit (HU) was computed and used to verify water equivalency. For the clinical use cases, the physician specifies the dimensions and geometry of a custom applicator from which a CAD model is designed and printed. Results: The doses measured from the PC-ISO Gafchromic film test were within 1% of the dose measured in only water between 1cm and 6cm from the channel. Doses increased 74% measured in only air. HU range was 1143. The applicators were sterilized using the Sterrad system multiple times without damage. As of submission 3 unique cylinders have been designed, printed, and used in the clinic. A standardizable workflow for commissioning custom 3D printed applicators was codified and will be reported. Conclusions: Quality assurance (QA) evaluation of the PC-ISO 3D-printing material showed that PC-ISO is a suitable material for a gynecological brachytherapy vaginal cylinder in a clinical setting. With the material commissioning completed, if the physician determines that a better treatment would Result, a customized design is fabricated with limited additional QA necessary. Although this study was specific to PC-ISO, the same setup can be used to evaluate other 3D-printing materials.

  14. A10_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  15. A16_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  16. A17_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  17. A5_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  18. A6_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  19. A7_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  20. A8_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

  1. A9_ISO

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 2014 1 November 2014 Short-Term Energy Outlook (STEO) Highlights  North Sea Brent crude oil spot prices fell from $95/barrel (bbl) on October 1 to $84/bbl at the end of the month. The causes included weakening outlooks for global economic and oil demand growth, the return to the market of previously disrupted Libyan crude oil production, and continued growth in U.S. tight oil production. Brent crude oil spot prices averaged $87/bbl in October, the first month Brent prices have

  2. License Iso. CM35

    Office of Legacy Management (LM)

    Reither this license nor my right under this licewe shall be uslgned or otherwise traneferred in violation of the pmvislont of the Atalc Finer&y Act oi 19%. ' Ibis licenae haJ..l ...

  3. Slovenia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Slovenia Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code SI 3-letter ISO code SVN Numeric ISO code...

  4. Peru: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Peru Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code PE 3-letter ISO code PER Numeric ISO code...

  5. Guadeloupe: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Guadeloupe Population Unavailable GDP Unavailable Energy Consumption 0.03 Quadrillion Btu 2-letter ISO code GP 3-letter ISO code GLP Numeric ISO...

  6. Marshall Islands: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Marshall Islands Population 56,429 GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code MH 3-letter ISO code MHL Numeric ISO code...

  7. Australia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Australia Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code AU 3-letter ISO code AUS Numeric ISO code...

  8. San Marino: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name San Marino Population 32,576 GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code SM 3-letter ISO code SMR Numeric ISO code...

  9. Anguilla: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Anguilla Population 13,452 GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code AI 3-letter ISO code AIA Numeric ISO code...

  10. Gambia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Gambia Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code GM 3-letter ISO code GMB Numeric ISO code...

  11. Antigua and Barbuda: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Antigua and Barbuda Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code AG 3-letter ISO code ATG Numeric ISO code...

  12. Thailand: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Thailand Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code TH 3-letter ISO code THA Numeric ISO code...

  13. Sierra Leone: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Sierra Leone Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code SL 3-letter ISO code SLE Numeric ISO code...

  14. Djibouti: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Djibouti Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code DJ 3-letter ISO code DJI Numeric ISO code...

  15. Saint Barthlemy: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Saint Barthlemy Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code BL 3-letter ISO code BLM Numeric ISO code...

  16. Taiwan: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Taiwan Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code TW 3-letter ISO code TWN Numeric ISO code...

  17. Georgia (country): Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Georgia Population Unavailable GDP Unavailable Energy Consumption 0.17 Quadrillion Btu 2-letter ISO code GE 3-letter ISO code GEO Numeric ISO...

  18. France: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name France Population Unavailable GDP Unavailable Energy Consumption 11.29 Quadrillion Btu 2-letter ISO code FR 3-letter ISO code FRA Numeric ISO...

  19. Croatia: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Croatia Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code HR 3-letter ISO code HRV Numeric ISO code...

  20. Palau: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Palau Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code PW 3-letter ISO code PLW Numeric ISO code...

  1. Uganda: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Uganda Population Unavailable GDP Unavailable Energy Consumption 0.04 Quadrillion Btu 2-letter ISO code UG 3-letter ISO code UGA Numeric ISO...

  2. Tuvalu: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Tuvalu Population 10,837 GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code TV 3-letter ISO code TUV Numeric ISO code...

  3. Ireland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Ireland Population Unavailable GDP Unavailable Energy Consumption 0.69 Quadrillion Btu 2-letter ISO code IE 3-letter ISO code IRL Numeric ISO...

  4. Cayman Islands: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Cayman Islands Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code KY 3-letter ISO code CYM Numeric ISO code...

  5. Myanmar: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Country Profile Name Myanmar Population Unavailable GDP Unavailable Energy Consumption Quadrillion Btu 2-letter ISO code MM 3-letter ISO code MMR Numeric ISO code...

  6. numerical modeling | OpenEI Community

    Open Energy Info (EERE)

    Submitted by Ocop(5) Member 15 July, 2014 - 07:07 MHK LCOE Reporting Guidance Draft Cost Current DOE LCOE numerical modeling Performance Tidal Wave To normalize competing...

  7. Numerical evaluation of effective unsaturated hydraulic properties...

    Office of Scientific and Technical Information (OSTI)

    unsaturated hydraulic properties for fractured rocks Citation Details In-Document Search Title: Numerical evaluation of effective unsaturated hydraulic properties for ...

  8. Solute concentrations influence microbial methanogenesis in coal-bearing strata of the Cherokee basin, USA

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kirk, Matthew F.; Wilson, Brien H.; Marquart, Kyle A.; Zeglin, Lydia H.; Vinson, David S.; Flynn, Theodore M.

    2015-11-18

    In this study, microorganisms have contributed significantly to subsurface energy resources by converting organic matter in hydrocarbon reservoirs into methane, the main component of natural gas. In this study, we consider environmental controls on microbial populations in coal-bearing strata of the Cherokee basin, an unconventional natural gas resource in southeast Kansas, USA. Pennsylvanian-age strata in the basin contain numerous thin (0.4–1.1 m) coalbeds with marginal thermal maturities (0.5–0.7% Ro) that are interbedded with shale and sandstone. We collected gas, water, and microbe samples from 16 commercial coalbed methane wells for geochemical and microbiological analysis. The water samples were Na–Cl typemore » with total dissolved solids (TDS) content ranging from 34.9 to 91.3 g L–1. Gas dryness values [C1/(C2 + C3)] averaged 2640 and carbon and hydrogen isotope ratios of methane differed from those of carbon dioxide and water, respectively, by an average of 65 and 183‰. These values are thought to be consistent with gas that formed primarily by hydrogenotrophic methanogenesis. Results from cultivation assays and taxonomic analysis of 16S rRNA genes agree with the geochemical results. Cultivable methanogens were present in every sample tested, methanogen sequences dominate the archaeal community in each sample (avg 91%), and few archaeal sequences (avg 4.2%) were classified within Methanosarcinales, an order of methanogens known to contain methylotrophic methanogens. Although hydrogenotrophs appear dominant, geochemical and microbial analyses both indicate that the proportion of methane generated by acetoclastic methanogens increases with the solute content of formation water, a trend that is contrary to existing conceptual models. Consistent with this trend, beta diversity analyses show that archaeal diversity significantly correlates with formation water solute content. In contrast, bacterial diversity more strongly correlates with location

  9. Webinar: DOE Analysis Related to H2USA | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Related to H2USA Webinar: DOE Analysis Related to H2USA Below is the text version of the webinar titled "DOE Analysis Related to H2USA," originally presented on July 24, 2013. In addition to this text version of the audio, you can access the presentation slides. Sunita Satyapal: [Audio starts mid-sentence] ...companies typically have internal models that cannot be shared publically while the focus of the DOE model is on transparency and accessibility of the analysis as well as

  10. FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FUJIFILM Hunt Chemicals U.S.A. Achieves Compressed Air System Energy-Reduction Goals with a Three-Phased Strategy In an attempt to eliminate equipment failures and downtime issues ...

  11. Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA...

    Broader source: Energy.gov (indexed) [DOE]

    MB) More Documents & Publications Advanced Li-Ion Polymer Battery Cell Manufacturing Plant in USA Li-Ion Battery Cell Manufacturing 2010 DOE, Li-Ion Battery Cell Manufacturing

  12. Energy Efficiency is Beautiful! L'Oréal USA Joins Better Plants...

    Broader source: Energy.gov (indexed) [DOE]

    Johnson280x210.jpg The Department of Energy welcomed L'Oral USA to the Better Buildings, Better Plants Program (Better Plants) and it is a beautiful partnership. As the nation's ...

  13. Global Economic Effects of USA Biofuel Policy and the Potential Contribution from Advanced Biofuels

    SciTech Connect (OSTI)

    Gbadebo Oladosu; Keith Kline; Paul Leiby; Rocio Uria-Martinez; Maggie Davis; Mark Downing; Laurence Eaton

    2012-01-01

    This study evaluates the global economic effects of the USA renewable fuel standards (RFS2), and the potential contribution from advanced biofuels. Our simulation results imply that these mandates lead to an increase of 0.21 percent in the global gross domestic product (GDP) in 2022, including an increase of 0.8 percent in the USA and 0.02 percent in the rest of the world (ROW); relative to our baseline, no-RFS scenario. The incremental contributions to GDP from advanced biofuels in 2022 are estimated at 0.41 percent and 0.04 percent in the USA and ROW, respectively. Although production costs of advanced biofuels are higher than for conventional biofuels in our model, their economic benefits result from reductions in oil use, and their smaller impacts on food markets compared with conventional biofuels. Thus, the USA advanced biofuels targets are expected to have positive economic benefits.

  14. Pieridae Energy (USA) Ltd. FE Dkt. No. 14-179-LNG

    Broader source: Energy.gov [DOE]

    The Office of Fossil Energy gives notice of receipt of an application filed on October 24, 2014, by Pieridae Energy (USA) Ltd (Pieridae) requesting long-term, multi-contract authority as further...

  15. M.; Weaver, J.N.; Wiedemann, H. (Stanford Univ., CA (USA). Stanford

    Office of Scientific and Technical Information (OSTI)

    the 2 MeV microwave gun for the SSRL 150 MeV linac Borland, M.; Weaver, J.N.; Wiedemann, H. (Stanford Univ., CA (USA). Stanford Synchrotron Radiation Lab.); Green, M.C.; Nelson,...

  16. EXS-16-0009- In the Matter of Alcatel-Lucent USA

    Broader source: Energy.gov [DOE]

    On February 23, 2016, OHA granted an Application for Stay filed by Alcatel-Lucent USA (Alcatel).  Alcatel requested a stay of enforcement of DOE's February 2014 Energy Conservation Standards for...

  17. USA Science and Engineering Festival: Inspiring and Educating the Clean Energy Workforce of Tomorrow

    Broader source: Energy.gov [DOE]

    The Energy Department is helping the nation's future STEM workforce (science, technology, engineering, and mathematics) explore energy literacy at the USA Science and Engineering Festival in Washington, D.C. Learn more about the event and how you can participate.

  18. Overview of Station Analysis Tools Developed in Support of H2USA

    Broader source: Energy.gov [DOE]

    Access the recording and download presentation slides from the Fuel Cell Technologies Office webinar "Overview of Station Analysis Tools Developed in Support of H2USA" held on May 12, 2015.

  19. Waste-to-energy: A review of the status and benefits in USA

    SciTech Connect (OSTI)

    Psomopoulos, C.S. Bourka, A.; Themelis, N.J.

    2009-05-15

    The USA has significant experience in the field of municipal solid waste management. The hierarchy of methodologies for dealing with municipal solid wastes consists of recycling and composting, combustion with energy recovery (commonly called waste-to-energy) and landfilling. This paper focuses on waste-to-energy and especially its current status and benefits, with regard to GHG, dioxin and mercury emissions, energy production and land saving, on the basis of experience of operating facilities in USA.

  20. INDUSTRIAL USES OF GEOTHERMAL ENERGY IN THE USA Dr. John W. Lund, PE

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USES OF GEOTHERMAL ENERGY IN THE USA Dr. John W. Lund, PE Emeritus Director Geo-Heat Center Oregon Institute of Technology Klamath Falls, OR, USA INTRODUCTION  Industrial applications & agricultural drying  Few in number in the U.S.  Large scale operations dominate - Gold ore heap leaching - Onion dehydration  Many small scale operations: - Milk pasteurization, laundry, beer production, alcohol production and mushroom growing. ENERGY USE  Installed capacity = 38 MWt  Annual

  1. Jacob P. Fugal, Scott Spuler Earth Observing Laboratory NCAR, Boulder, CO USA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    airborne digital holographic instrument for measuring the spatial distribution and local size distributions of cloud particles: Holographic Detector for Clouds 2 (HOLODEC 2) Jacob P. Fugal, Scott Spuler Earth Observing Laboratory NCAR, Boulder, CO USA & Raymond A. Shaw Physics Department, michigan Tech Houghton, MI USA C-130 Hercules Q HIAPER Gulfstream GV HOLODEC (Holographic Detector for Clouds) is an airborne instrument that measures the size, shape, and relative 3D position of cloud

  2. Preliminary Analysis of Modules Deployed at PV-USA for 18-24 Years |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Preliminary Analysis of Modules Deployed at PV-USA for 18-24 Years Preliminary Analysis of Modules Deployed at PV-USA for 18-24 Years Presented at the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado pvmrw13_ps1_pvusa_pineda.pdf (417.45 KB) More Documents & Publications Cost of Capital Firearms Qualifications Courses Protective Force Firearms Qualifications Courses, July 2011

  3. 2007-2009 USA Emission Solutions for Heavy-Duty Diesel Engines | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy -2009 USA Emission Solutions for Heavy-Duty Diesel Engines 2007-2009 USA Emission Solutions for Heavy-Duty Diesel Engines 2002 DEER Conference Presentation: Southwest Research Institute 2002_deer_leet.pdf (429.05 KB) More Documents & Publications Low Emisssions Potential of EGR-SCR-DPF and Advanced Fuel Formulations - A Progress Report State-of-the-Art and Emergin Truck Engine Technologies Variable Charge Motion for 2007-2010 Heavy Duty Diesel Engines

  4. Direct Numerical Simulation of Compressible, Turbulent Flow ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The computational mesh for this direct numerical simulation was over 33 billion cells, and was run on up to 102,400 cores under a DoD HPCMP Frontier Project. Nicholas Bisek and ...

  5. Listeriosis Prevention Knowledge Among Pregnant Women in the USA

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ogunmodede, Folashade; Jones, Jeffery L.; Scheftel, Joni; Kirkland, Elizabeth; Schulkin, Jay; Lynfield, Ruth

    2005-01-01

    Background: Listeriosis is a food-borne disease often associated with ready-to-eat foods. It usually causes mild febrile gastrointestinal illness in immunocompetent persons. In pregnant women, it may cause more severe infection and often crosses the placenta to infect the fetus, resulting in miscarriage, fetal death or neonatal morbidity. Simple precautions during pregnancy can prevent listeriosis. However, many women are unaware of these precautions and listeriosis education is often omitted from prenatal care. Methods: Volunteer pregnant women were recruited to complete a questionnaire to assess their knowledge of listeriosis and its prevention, in two separate studies. One study was a nationalmore » survey of 403 women from throughout the USA, and the other survey was limited to 286 Minnesota residents. Results: In the multi-state survey, 74 of 403 respondents (18%) had some knowledge of listeriosis, compared with 43 of 286 (15%) respondents to the Minnesota survey. The majority of respondents reported hearing about listeriosis from a medical professional. In the multi-state survey, 33% of respondents knew listeriosis could be prevented by not eating delicatessen meats, compared with 17% in the Minnesota survey ( p = 0.01). Similarly, 31% of respondents to the multi-state survey compared with 19% of Minnesota survey respondents knew listeriosis could be prevented by avoiding unpasteurized dairy products (p = 0.05). As for preventive behaviors, 18% of US and 23% of Minnesota respondents reported avoiding delicatessen meats and ready-to-eat foods during pregnancy, whereas 86% and 88%, respectively, avoided unpasteurized dairy products. Conclusions: Most pregnant women have limited knowledge of listeriosis prevention. Even though most respondents avoided eating unpasteurized dairy products, they were unaware of the risk associated with ready-to-eat foods. Improved education of pregnant women regarding the risk and sources of listeriosis in pregnancy is needed.« less

  6. Crosswell seismic imaging in the Permian Basin, West Texas, USA

    SciTech Connect (OSTI)

    Langan, R.T.; Harris, J.M.; Jensen, T.L.

    1995-12-31

    Crosswell seismic imaging technology has advanced rapidly over the last three years as the processing methods have become more robust, the cost of data acquisition has fallen, and the interwell distances of operation have increased. The Permian Basin of west Texas, USA is proving to be an ideal environment in which to develop this technology because of the relatively low seismic attenuation of the carbonate-dominated lithology, the moderate well spacings in the large number of mature fields, and the unusually high number of reflecting horizons. Current technology permits us to operate in carbonates at well spacings on the order of 2000 ft (650 m) and to image P- and S-wave reflecting horizons on a scale of 8 to 25 ft (2.4 to 7.6 m). Crosswell technology is not limited to carbonates, although the majority of recent applications have been in this environment. We are involved in three separate crosswell experiments in the Permian Basin, each with unique objectives. The first experiment involves a CO{sub 2} pilot project in a Grayburg Formation reservoir on the eastern edge of the Central Basin Platform. Here we are attempting to characterize the reservoir at a scale unobtainable from 3-D surface seismic data and to image CO{sub 2} fronts directly. The second experiment deals with a waterflood in a Middle Clearfork Formation reservoir on the Eastern Shelf, where we are trying to explain the erratic response of adjacent wells to water injection. In the third project we are trying to image the structure and stratigraphy of subtle {open_quotes}anomalies{close_quotes} in 3-D surface seismic images of the Wolfcamp Formation.

  7. Detailed chemical kinetic models for large n-alkanes and iso-alkanes found in conventional and F-T diesel fuels

    SciTech Connect (OSTI)

    Westbrook, C K; Pitz, W J; Mehl, M; Curran, H J

    2009-03-09

    n-Hexadecane and 2,2,4,4,6,8,8-heptamethylnonane represent the primary reference fuels for diesel that are used to determine cetane number, a measure of the ignition property of diesel fuel. With the development of chemical kinetics models for both primary reference fuels, a new capability is now available to model diesel fuel ignition. Additionally, we have developed chemical kinetic models for a whole series of large n-alkanes and a large iso-alkane to represent these chemical classes in fuel surrogates for conventional and future fuels. These chemical kinetic models are used to predict the effect of the aforementioned fuel components on ignition characteristics under conditions found in internal combustion engines.

  8. Solute concentrations influence microbial methanogenesis in coal-bearing strata of the Cherokee basin, USA

    SciTech Connect (OSTI)

    Kirk, Matthew F.; Wilson, Brien H.; Marquart, Kyle A.; Zeglin, Lydia H.; Vinson, David S.; Flynn, Theodore M.

    2015-11-18

    In this study, microorganisms have contributed significantly to subsurface energy resources by converting organic matter in hydrocarbon reservoirs into methane, the main component of natural gas. In this study, we consider environmental controls on microbial populations in coal-bearing strata of the Cherokee basin, an unconventional natural gas resource in southeast Kansas, USA. Pennsylvanian-age strata in the basin contain numerous thin (0.4–1.1 m) coalbeds with marginal thermal maturities (0.5–0.7% Ro) that are interbedded with shale and sandstone. We collected gas, water, and microbe samples from 16 commercial coalbed methane wells for geochemical and microbiological analysis. The water samples were Na–Cl type with total dissolved solids (TDS) content ranging from 34.9 to 91.3 g L–1. Gas dryness values [C1/(C2 + C3)] averaged 2640 and carbon and hydrogen isotope ratios of methane differed from those of carbon dioxide and water, respectively, by an average of 65 and 183‰. These values are thought to be consistent with gas that formed primarily by hydrogenotrophic methanogenesis. Results from cultivation assays and taxonomic analysis of 16S rRNA genes agree with the geochemical results. Cultivable methanogens were present in every sample tested, methanogen sequences dominate the archaeal community in each sample (avg 91%), and few archaeal sequences (avg 4.2%) were classified within Methanosarcinales, an order of methanogens known to contain methylotrophic methanogens. Although hydrogenotrophs appear dominant, geochemical and microbial analyses both indicate that the proportion of methane generated by acetoclastic methanogens increases with the solute content of formation water, a trend that is contrary to existing conceptual models. Consistent with this trend, beta diversity analyses show that archaeal diversity significantly correlates with formation water solute content. In contrast

  9. Numerical simulations of strong incompressible magnetohydrodynamic turbulence

    SciTech Connect (OSTI)

    Mason, J.; Cattaneo, F.; Perez, J. C.; Boldyrev, S.

    2012-05-15

    Magnetised plasma turbulence pervades the universe and is likely to play an important role in a variety of astrophysical settings. Magnetohydrodynamics (MHD) provides the simplest theoretical framework in which phenomenological models for the turbulent dynamics can be built. Numerical simulations of MHD turbulence are widely used to guide and test the theoretical predictions; however, simulating MHD turbulence and accurately measuring its scaling properties is far from straightforward. Computational power limits the calculations to moderate Reynolds numbers and often simplifying assumptions are made in order that a wider range of scales can be accessed. After describing the theoretical predictions and the numerical approaches that are often employed in studying strong incompressible MHD turbulence, we present the findings of a series of high-resolution direct numerical simulations. We discuss the effects that insufficiencies in the computational approach can have on the solution and its physical interpretation.

  10. Mechanical diode: Comparing numerical and experimental characterizations

    SciTech Connect (OSTI)

    Sagartz, M.J.; Segalman, D.; Simmermacher, T.

    1998-02-01

    In this introductory work, joint compliance is studied in both a numerical and experimental setting. A simple bolted interface is used as the test article and compliance is measured for the joint in both compression and in tension. This simple interface is shown to exhibit a strong non-linearity near the transition from compression to tension (or vice-versa). Modeling issues pertaining to numerically solving for the compliance are addressed. It is shown that the model predictions, in spite of convergence being very sensitive to numerical artifacts of the interface model, are in good agreement with experimentally measured strains and joint compliances. The joint behavior is a mechanical analogy to a diode, i.e., in compression, the joint is very stiff, acting almost as a rigid link, while in tension the joint is relatively soft, acting as a spring.

  11. Numerical prediction of window condensation potential

    SciTech Connect (OSTI)

    McGowan, A.G.

    1995-08-01

    Although a substantial amount of effort has been expended to develop numerical methods for determining windows U-factors (EE 1983; Goss and Curcija 1994; Standaert 1985; CSA 1993a; NFRC 1991), there has been little work to data on using numerical methods to predict condensation potential. It is perhaps of direct interest to most ASHRAE members to determine heat loss and solar gains through windows as a precursor to sizing heating and cooling equipment, but condensation has long been recognized as an extremely important issue for consumers (and, consequently, for window manufacturers). Moreover, building scientists recognize the link between condensation and increased energy consumption (due to latent loads), reduced occupant comfort and indoor air quality (from the presence of bacteria and mold), and structural damage (where accumulated condensation is absorbed by the building material, thus reducing their structural stability). The National Fenestration Rating Council (NFRC) is developing a rating method for condensation potential in fenestration products as part of its mandate from the US Department of Energy (DOE). A rating method would benefit from the use of simulation as a supplement to physical condensation resistance testing to reduce the cost and time required for implementation and increase the flexibility of the rating method. This paper outlines one of the necessary components in the application of numerical methods for evaluating condensation in fenestration products. The theoretical approach and its practical application are discussed, as well as some comparisons between numerical prediction and physical test results for a sample of products.

  12. Numerical likelihood analysis of cosmic ray anisotropies

    SciTech Connect (OSTI)

    Carlos Hojvat et al.

    2003-07-02

    A numerical likelihood approach to the determination of cosmic ray anisotropies is presented which offers many advantages over other approaches. It allows a wide range of statistically meaningful hypotheses to be compared even when full sky coverage is unavailable, can be readily extended in order to include measurement errors, and makes maximum unbiased use of all available information.

  13. Error Estimation for Fault Tolerance in Numerical Integration...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Error Estimation for Fault Tolerance in Numerical Integration Solvers Event Sponsor: ... In numerical integration solvers, approximation error can be estimated at a low cost. We ...

  14. Numerical Verification of Bounce Harmonic Resonances in Neoclassical

    Office of Scientific and Technical Information (OSTI)

    for Tokamaks Kimin Kim, Jong-Kyu Park and Allen H. Boozer 70 PLASMA PHYSICS AND FUSION TECHNOLOGY Tokamaks, Numerical Verification Tokamaks, Numerical Verification This...

  15. Development of Numerical Simulation Capabilities for In Situ...

    Office of Scientific and Technical Information (OSTI)

    Development of Numerical Simulation Capabilities for In Situ Heating of Oil Shale Citation Details In-Document Search Title: Development of Numerical Simulation Capabilities for In ...

  16. Numerical modeling of water injection into vapor-dominatedgeothermal...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Numerical modeling of water injection into vapor-dominatedgeothermal reservoirs Citation Details In-Document Search Title: Numerical modeling of water injection ...

  17. Stress-dependent permeability of fractured rock masses: A numerical...

    Office of Scientific and Technical Information (OSTI)

    permeability of fractured rock masses: A numerical study Citation Details In-Document Search Title: Stress-dependent permeability of fractured rock masses: A numerical study We ...

  18. Toward portable programming of numerical linear algebra on manycore...

    Office of Scientific and Technical Information (OSTI)

    Toward portable programming of numerical linear algebra on manycore nodes. Citation Details In-Document Search Title: Toward portable programming of numerical linear algebra on ...

  19. Numerical simulations for low energy nuclear reactions including...

    Office of Scientific and Technical Information (OSTI)

    Numerical simulations for low energy nuclear reactions including direct channels to validate statistical models Citation Details In-Document Search Title: Numerical simulations for ...

  20. Numerical Modeling Studies of The Dissolution-Diffusion-Convection...

    Office of Scientific and Technical Information (OSTI)

    Numerical Modeling Studies of The Dissolution-Diffusion-Convection ProcessDuring CO2 Storage in Saline Aquifers Citation Details In-Document Search Title: Numerical Modeling ...

  1. Numerical Modeling At Dixie Valley Geothermal Area (McKenna ...

    Open Energy Info (EERE)

    Numerical Modeling At Dixie Valley Geothermal Area (McKenna & Blackwell, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Numerical Modeling...

  2. Sandia Energy - Numerical Simulations of Hydrokinetics in the...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Numerical Simulations of Hydrokinetics in the Roza Canal, Yakima Washington Home Renewable Energy Energy Water Power Computational Modeling & Simulation Numerical Simulations of...

  3. USA RS Basic Contract - Contract No.: DE-RW0000005 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    USA RS Basic Contract - Contract No.: DE-RW0000005 USA RS Basic Contract - Contract No.: DE-RW0000005 This document describes the Statement of Work (SOW) of the Management and Operating Contractor (M&O) Contract for the U.S. Department of Energy (DOE), Office of Civilian Radioactive Waste Management (OCRWM) Program's Yucca Mountain Project (YMP). An M&O contract is defined at Federal Acquisition Regulation (FAR) 17.6 and Department of Energy Acquisition Regulation (DEAR) 970. Inasmuch as

  4. SEMI-ANNUAL REPORTS FOR PIERIDAE ENERGY (USA), LTD - DKT. NO. 14-179-LNG -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ORDER 3639 | Department of Energy PIERIDAE ENERGY (USA), LTD - DKT. NO. 14-179-LNG - ORDER 3639 SEMI-ANNUAL REPORTS FOR PIERIDAE ENERGY (USA), LTD - DKT. NO. 14-179-LNG - ORDER 3639 October 2015 (1.1 MB) April 2016 (1.05 MB) More Documents & Publications SEMI-ANNUAL REPORTS FOR COMMONWEALTH LNG, LLC (FORMERLY WALLER LNG SERVICES, LLC D/B/A WALLER POINT LNG) - FE DKT. NO. 12-152-LNG - ORDER 3211 SEMI-ANNUAL REPORTS FOR GULF COAST LNG EXPORT, LLC - FE DKT. NO. 12-05-LNG - ORDER 3163

  5. ORDER 3770: BEAR HEAD LNG CORPORATION and BEAR HEAD LNG (USA), LLC |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy 3770: BEAR HEAD LNG CORPORATION and BEAR HEAD LNG (USA), LLC ORDER 3770: BEAR HEAD LNG CORPORATION and BEAR HEAD LNG (USA), LLC OPINION AND ORDER GRANTING LONG-TERM, MULTI-CONTRACT AUTHORIZATION TO EXPORT U.S.-SOURCED NATURAL GAS BY PIPELINE TO CANADA FOR LIQUEFACTION AND RE-EXPORT IN THE FORM OF LIQUEFIED NATURAL GAS TO NON-FREE TRADE AGREEMENT COUNTRIES On February 5, 2016, the Energy Department issued an authorization to Bear Head LNG Corporation and Bear Head LNG

  6. U.S. Department of Energy Awards a Contract to USA Repository Services for Management and Operating Contractor Support for the Yucca Mountain Project

    Broader source: Energy.gov [DOE]

    Washington, D.C. -- The U.S. Department of Energy (DOE) today awarded a $2.5 billion management and operating (M&O) contract to USA Repository Services (USA-RS), a wholly-owned subsidiary of...

  7. LG Electronics U.S.A. v. DOE, Stipulation of Voluntary Dismissal

    Broader source: Energy.gov [DOE]

    LG Electronics U.S.A., Inc. v. U.S. Dept. of Energy, Civil Action Number 1:09-cv-02297-JDB - LG voluntarily dismissed its claims against the DOE and agrees to remove the ENERGY STAR labels from various refrigerator-freezers.

  8. Travel to France as Chief US Delegate at a meeting of International Standards Organization ISO/TC-85, ``Nuclear Technology``. Foreign trip report, March 17--March 26, 1994

    SciTech Connect (OSTI)

    Westfall, R.M.

    1994-04-11

    As overall US Advisor for ISO/TC-85, SC-5, Dr. Westfall met with (1) Work Group 1, ``Measurement Techniques for the Chemical and Physical Characterization of UF{sub 6}, UO{sub 2}, and Mixed Oxide,`` on Monday, March 21, (2) Work Group 5, ``Standardization of Measurement Methods for the Characterization of Solid and Solidified Waste Forms, and for the Corrosion of their Primary Containers,`` on Tuesday, March 22; and (3) the full Subcommittee-5 on Wednesday, March 23. The status of work by all seven work groups in SC-5 was reported. Those having to do with nuclear fuel transportation (WG-4: UF, Containers, WG-9: Cask Trunnions, and WG-10: Cask Confinement) either have approved standards or drafts at an advanced stage of development. These work group convenors were asked to maintain their membership and establish new work areas in the field of nuclear fuel packaging. Definition of scope for new work is to be done in coordination with the interested staff members of the International Atomic Energy Agency, Vienna, Austria. On Thursday, March 24, the Cogema-Marcoule Plant staff hosted the SC-5 members to technical tours of their nuclear fuel reprocessing and waste vitrification and storage facilities.

  9. Investigation of the Degradation Mechanisms of a Variety of Organic Photovoltaic Devices by Combination of Imaging Techniques—the ISOS-3Inter-laboratory Collaboration

    SciTech Connect (OSTI)

    Germack D.; Rosch, R.; Tanenbaum, D.M.; Jorgensen, M.; Seeland, M.; Barenklau, M.; Hermenau, M.; Voroshazi, E.; Lloyd, M.T.; Galagan, Y.; Zimmermann, B.; Wurfel, U.; Hosel, M.; Dam, H.F.; Gevorgyan, S.A.; Kudret, S.; Maes, W.; Lutsen, L.; Vanderzande, D.; Andriessen, R.; Teran-Escobar, G.; Lira-Cantu, M.; Rivaton, A.; Uzunoglu, G.Y.; Andreasen, B.; Madsen, M.V.; Norrman, K.; Hoppe, H.; Krebs, F.C.

    2012-04-01

    The investigation of degradation of seven distinct sets (with a number of individual cells of n {ge} 12) of state of the art organic photovoltaic devices prepared by leading research laboratories with a combination of imaging methods is reported. All devices have been shipped to and degraded at Risoe DTU up to 1830 hours in accordance with established ISOS-3 protocols under defined illumination conditions. Imaging of device function at different stages of degradation was performed by laser-beam induced current (LBIC) scanning; luminescence imaging, specifically photoluminescence (PLI) and electroluminescence (ELI); as well as by lock-in thermography (LIT). Each of the imaging techniques exhibits its specific advantages with respect to sensing certain degradation features, which will be compared and discussed here in detail. As a consequence, a combination of several imaging techniques yields very conclusive information about the degradation processes controlling device function. The large variety of device architectures in turn enables valuable progress in the proper interpretation of imaging results - hence revealing the benefits of this large scale cooperation in making a step forward in the understanding of organic solar cell aging and its interpretation by state-of-the-art imaging methods.

  10. Numerical recipes for mold filling simulation

    SciTech Connect (OSTI)

    Kothe, D.; Juric, D.; Lam, K.; Lally, B.

    1998-07-01

    Has the ability to simulate the filling of a mold progressed to a point where an appropriate numerical recipe achieves the desired results? If results are defined to be topological robustness, computational efficiency, quantitative accuracy, and predictability, all within a computational domain that faithfully represents complex three-dimensional foundry molds, then the answer unfortunately remains no. Significant interfacial flow algorithm developments have occurred over the last decade, however, that could bring this answer closer to maybe. These developments have been both evolutionary and revolutionary, will continue to transpire for the near future. Might they become useful numerical recipes for mold filling simulations? Quite possibly. Recent progress in algorithms for interface kinematics and dynamics, linear solution methods, computer science issues such as parallelization and object-oriented programming, high resolution Navier-Stokes (NS) solution methods, and unstructured mesh techniques, must all be pursued as possible paths toward higher fidelity mold filling simulations. A detailed exposition of these algorithmic developments is beyond the scope of this paper, hence the authors choose to focus here exclusively on algorithms for interface kinematics. These interface tracking algorithms are designed to model the movement of interfaces relative to a reference frame such as a fixed mesh. Current interface tracking algorithm choices are numerous, so is any one best suited for mold filling simulation? Although a clear winner is not (yet) apparent, pros and cons are given in the following brief, critical review. Highlighted are those outstanding interface tracking algorithm issues the authors feel can hamper the reliable modeling of today`s foundry mold filling processes.