Powered by Deep Web Technologies
Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Unlimited Release  

Office of Scientific and Technical Information (OSTI)

Unlimited Release Unlimited Release Printed November 1987 Proceedings of The Wellbore Sampling Workshop Richard K. Traeger, Barry W. Harding Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 9 4 5 5 0 f o r the United States Department of Energy . under Contract DE-AC04-76DP00789 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately

2

Unlimited Release  

E-Print Network (OSTI)

Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy’s National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. SAND2012-7341P

unknown authors

2012-01-01T23:59:59.000Z

3

Unlimited Release  

E-Print Network (OSTI)

Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy’s National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. SAND2012-7340P

unknown authors

2012-01-01T23:59:59.000Z

4

Unlimited Release  

E-Print Network (OSTI)

Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy’s National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release, further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government, any agency thereof, or any of their contractors or subcontractors. The views and opinions expressed herein do not necessarily state or reflect those of the United States Government, any agency thereof,

B. L. Larsen; Barbara L. Larsen

2011-01-01T23:59:59.000Z

5

SANDlA REPORT Unlimited Release  

Office of Scientific and Technical Information (OSTI)

SANDlA REPORT SANDlA REPORT Unlimited Release Printed October 1995 SAND95-2129 UC-607 '4 d Oleoresin Capsicum Toxicology Evaluation and Hazard Review Melecita M. Archuleta Issued by Sandia National Ldxratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by a n agency of the United States Government. Neither the United States Govern- ment nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, prod- uct, or process disclosed, or represents that its

6

SAND76-0260 Unlimited Release  

NLE Websites -- All DOE Office Websites (Extended Search)

SAND76-0260 SAND76-0260 Unlimited Release Printed July 1976 . POWER SUPPLIES FOR SPACE SYSTEMS QUALITY ASSURANCE BY SANDIA LABORATORIES Robert L. Hannigan Robert R. Harnar Electronic and Electrical Devices Division 951 2 Sandia Laboratories Albuquerque, NM 87115 AB STRAC T This report summarizes the Sandia Laboratories participation in Quality Assurance programs for Radioisotopic Thermoelectric Generators which have been used i n space systems over the past 10 years. Basic elements of this QA program a r e briefly de- scribed and recognition of assistance from other Sandia organizations is included. Descriptions of the various systems f o r which Sandia has had the QA responsibility a r e presented, including SNAP 1 9 (Nimbus, Pioneer, Viking), SNAP 27 (Apollo),

7

SANDIA REPORT SAND2007-4352P Unlimited Release  

NLE Websites -- All DOE Office Websites (Extended Search)

352P 352P Unlimited Release Printed September 2007 Calendar Year 2006 Annual Site Environmental Report for Sandia National Laboratories, New Mexico Matthew Sneddon, Susan Koss, Rebecca Sanchez and Charlene Cunningham Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94Al85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States

8

SAND97-8490 UC-404 Unlimited Release  

Office of Scientific and Technical Information (OSTI)

SAND97-8490 UC-404 SAND97-8490 UC-404 Unlimited Release Printed March 1997 J Mechanical Properties and Energy Absorption Characteristics of a Polyurethane Foam S. H. Goods, C. L. Neuschwanger, C. Henderson, D. M. Skala DISCLAIMER This report was prepared as a n account of work sponsored by a n agenq of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, make any warrantyy express or impIied, or assumes any legal liabili- ty or responsibility for the accuracy, completeness, or usefulness of any information, appa- ratus, product, or process disdased, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necrsariiy constitute or

9

SANDIA REPORT SAND98-0260 UC-705 Unlimited Release  

Office of Scientific and Technical Information (OSTI)

8-0260 UC-705 8-0260 UC-705 Unlimited Release Printed February 1998 An Efficient Method for Calculating RMS von Mises Stress in a Random Vibration Environment Daniel J. Segalman, Clay W. G. Fulcher, Garth M. Reese, R Prepared by Sandia National Labora Sc2900Q18-81) Issued by Sanma National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Govern- ment nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, o r assumes any legal liability or responsibility for the accuracy, completeness, o

10

SANDIA REPORT SAND95-2049 UC-700 Unlimited Release  

Office of Scientific and Technical Information (OSTI)

5-2049 UC-700 5-2049 UC-700 Unlimited Release Printed August 1995 c CHAPARRAL: A Library for Solving Large Enclosure Radiation Heat Transfer Problems Micheal W. Glass Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 for the United S t a t e s Department of Energy under Contract DE-Am-94AL85000 , I , - Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOnCE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Govern- ment nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the

11

CONTRACTOR REPORT SAND96-2555 UC-1243 Unlimited Release  

NLE Websites -- All DOE Office Websites (Extended Search)

CONTRACTOR REPORT SAND96-2555 UC-1243 Unlimited Release A Study of Productionlnjection Data from Slim Holes and Large-Diameter Wells at the Takigami Geothermal Field, Kyushu,...

12

Approved for public release; distribution is unlimited. NAVAL POSTGRADUATE SCHOOL  

E-Print Network (OSTI)

1995 Thesis Advisor: Michael J. Zyda Thesis Co-Advisor: John S. Falby #12;Public reporting burden-18 REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 1. AGENCY USE ONLY (Leave Blank) 2. REPORT DATEApproved for public release; distribution is unlimited. THESIS NAVAL POSTGRADUATE SCHOOL Monterey

Zyda, Michael

13

Distribution Statement A: Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

: Approved for public release; distribution is unlimited. AHPCRC, The Army High Performance Computing for the warfighter. High performance computing (HPC) provides significant advantages in designing and characterizing theories and best practices of simulation-based engineering sciences and high performance computing

Prinz, Friedrich B.

14

IA REP0 SAND85-2809 Unlimited Release UC-92A  

Office of Scientific and Technical Information (OSTI)

IA REP0 SAND85-2809 Unlimited Release UC-92A IA REP0 SAND85-2809 Unlimited Release UC-92A Printed July 1986 High Energy Gas Fracture Experiments in Fluid-Filled Boreholes-Potential Geothermal Application J. F. Cuderman, T. Y. Chu, J. Jung, R. D. Jacobson Prepared by Sandia National Laboratories Albuquerque, New Mexico 87 185 and Livermore, California 94550 for the United States Department of Energy under Contract DE-AC04-76DP00789 DISCLAIMER This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency Thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process

15

CONTRACTOR REPORT SAND952729 Unlimited Release U G A Q O D  

Office of Scientific and Technical Information (OSTI)

r x 12-N -. CONTRACTOR REPORT SAND952729 Unlimited Release U G A Q O D Evaluation of Polyacrylonitrile (PAN) as a Binding Polymer for Absorbers Used to-Treat Liquid Radioactive...

16

Approved for public release; distribution is unlimited. Calculation Cross-Reference Guide  

E-Print Network (OSTI)

for the U.S. D~epiet of Eney Office of Environmental Management. App oedfo pbIc release: distiution is unrimfled. Remedial Action Plan and Site Design for Stabilization of Moab Title I Uranium Mill Tailings

I Uranium; Mill Tailings; U. S. Deparmnt

2006-01-01T23:59:59.000Z

17

MEDICAL EVACUATION DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

FM 4-02.2 May 2007 MEDICAL EVACUATION DISTRIBUTION RESTRICTION: Approved for public release, DC, 30 July 2009 MEDICAL EVACUATION 1. Change FM 4-02.2, 8 May 2007, as follows: Remove old pages-02.2 Department of the Army Washington, DC, 8 May 2007 MEDICAL EVACUATION Contents Page PREFACE

US Army Corps of Engineers

18

Approved for public release; distribution is unlimited. ERDC/EL TN-11-4  

E-Print Network (OSTI)

the well was successfully capped (OSAT 2010). This is comparable in magnitude to previous oil spills in U.S due to releases of crude oil from tankers, offshore platforms, drilling rigs and wells. Spills was one of four large oil spills occurring along U.S. coastlines from 1976 to 2010. Depending

US Army Corps of Engineers

19

Availability Statements for Unclassified Unlimited STI Products |  

Office of Scientific and Technical Information (OSTI)

Availability Statements for Unclassified Unlimited STI Products Availability Statements for Unclassified Unlimited STI Products Print page Print page Email page Email page DOCUMENT AVAILABILITY Online Access: U.S. Department of Energy (DOE) reports produced after 1991 and a growing number of pre-1991 documents are available free via DOE's SciTech Connect (http://www.osti.gov/scitech) Reports not in digital format may be purchased by the public from the National Technical Information Service (NTIS): U.S. Department of Commerce National Technical Information Service 5301 Shawnee Rd Alexandra, VA 22312 www.ntis.gov Phone: (800) 553-NTIS (6847) or (703) 605-6000 Fax: (703) 605-6900 Email: orders@ntis.gov Reports not in digital format are available to DOE and DOE contractors from the Office of Scientific and Technical Information (OSTI):

20

Inverters Unlimited Inc | Open Energy Information  

Open Energy Info (EERE)

Unlimited Inc Jump to: navigation, search Name Inverters Unlimited Inc Place New York Zip 12205 Sector Solar Product US-based manufacturer of solar inverters. References...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Energy Unlimited Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Unlimited is a privately held company specializing in the development of wind energy and the total management of wind energy projects. References Energy Unlimited...

22

Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

a complete molecular level understanding of the chemistry and physics of living systems and astounding approaches to energy sufficiency are considered along with the potential of biological systems for providing increasingly toward the goal of understanding complete molecular networks in living systems. Understanding

23

Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

of the scientific Literature As it Pertains To Gulf War Illnesses, Vol 7 Depleted Uranium, MR-1018/7-OSD, 1999, RAND. Depleted Uranium in Balkan Residents. Report prepared for D.MacLeod of BBC Scotland by : Prof. NL'URANIUM ET LES ARMES � L'URANIUM APPAUVRI. Pierre Roussel* Institut de Physique Nucléaire, CNRS

24

Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

and target. Hard targets include clandestine drug manufacturing facilities, terrorist #12;strongholds group. Large populations of micrites could be introduced into hard targets, carrying in exotic taggant

25

Solar Unlimited USA | Open Energy Information  

Open Energy Info (EERE)

Logo: Solar Unlimited USA Name Solar Unlimited USA Address 2353 Park Ave. Place Cedar City, Utah Zip 84721 Sector Solar Product Solar energy systems Year founded 1998 Phone number 435-867-9876 Website http://solarunlimited.net/ Coordinates 37.6944762°, -113.0937928° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":37.6944762,"lon":-113.0937928,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

26

DOE-HDBK-1016/1-93; DOE Fundamentals Handbook Engineering Symbology, Prints, and Drawings Volume 1 of 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

016/1-93 016/1-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS Volume 1 of 2 U.S. Department of Energy FSC-6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN37831. Available to the public from the National Technical Information Service, U.S. Department of Commerce, 5285 Port Royal Rd., Springfield, VA 22161. Order No. DE93012220 DOE-HDBK-1016/1-93 ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS ABSTRACT The Engineering Sym bology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and

27

DOE-HDBK-1016/2-93; DOE Fundamentals Handbook Engineering Symbology, Prints, and Drawings Volume 2 of 2  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

6/2-93 6/2-93 JANUARY 1993 DOE FUNDAMENTALS HANDBOOK ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS Volume 2 of 2 U.S. Department of Energy FSC-6910 Washington, D.C. 20585 Distribution Statement A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831. Available to the public from the National Technical Information Services, U.S. Department of Commerce, 5285 Port Royal., Springfield, VA 22161. Order No. DE93012181 DOE-HDBK-1016/2-93 ENGINEERING SYMBOLOGY, PRINTS, AND DRAWINGS ABSTRACT The Engineering Sym bology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical

28

LA-14427-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

, -252, -253, and -254, curium-240, -241, -242, -243, -244, -245, -246 and -247, einsteinium-252, - 253, -254 and -255, fermium-257, gadolinium-148, mendelevium-258, neptunium-235 and - 237, polonium-210

29

Approved for public release; distri6ufion is unlimited.  

E-Print Network (OSTI)

-1946)............................................................................... 3 Early Cold War Era (1946-1956)............................................................................. 6 Late Cold War Era (1956-1990) .............................................................................. 7 Controlled ThermonuclearResearch Fusion and Controlled Thermonuclear

30

SANDIA REPORT SAND964839 UC-400 Unlimited Release  

Office of Scientific and Technical Information (OSTI)

relevance. Although the Li - thionyl chloride system yields high open circuit voltage and energy density, it has start-up problems after storage (i.e. voltage-delay), shows...

31

LA-14407-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

.radionuclide.concentrations.at.all.LANL.perimeter. stations.were.less.than.1%.of.the.EPA.dose.limit.for.the. public ..Measurable.amounts.of.tritium.north-northeast.of.Albuquerque.and.25.miles.northwest.of.Santa.Fe. (Figure.ES-1) ..The.40-square-mile.Laboratory.is.situated.on.the.Pajarito.Plateau,.a.series.of.mesas.separated

32

LA-14369-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

(Cont'd) 26. J. C.Jung, "An Analysis ofActivation and the Impact ofTritium Breeding Media and Structural was found to be separable by electroloysis of water in the 1930's, but tritium (with a concentration of only-cooled, and 2) separately cooled. The most important liquid metals now considered are liquid lithium and l7 Li

33

LA-14407-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

breeding ratio from the separate zone blanket option with different neutron multipliers (internally cooled. Liquid Metal a. liquid metal as breeder and coolant b. liquid metal as breeder and a separate coolant 2. Solid Breeder (with separate coolant). The candidate liquid metals are lithium, Li,yPbg., and Li

34

LA-14407-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

.meetings,.with.joint.and.parallel.sessions,.were.held. at.the.same.time.and.location.to.cover.it),.and.a.separate. Town

35

LA-14369-Env Approed for public release; distribution is unlimited .  

E-Print Network (OSTI)

.mean.radionuclide.concentrations.at.all.LANL. perimeter.stations.were.less.than.1%.of.the.EPA.dose.limit.for.the.public ..Measurable.amounts.of.tritium-square-mile.Laboratory.is.situated.on.the.Pajarito.Plateau,.a.series. of.mesas.separated.by.deep.contaminated.alluvial.and.intermediate.perched. groundwater bodies are separated from the regional aquifer by hundreds of feet of dry rock, so infiltration

36

SANDIA REPORT SAND2007-4407P Unlimited Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Tonopah Test Range U UDP underground discharge points USAF U.S. Air Force USFS U.S. Forest Service USGS U.S. Geological Survey USN United States Navy UST underground storage...

37

SANDIA REPORT SAND2007-1199P Unlimited Release  

NLE Websites -- All DOE Office Websites (Extended Search)

in tables within each section, and trend graphs in Section 4-8. DOE drinking water guidelines are calculated as four percent of the published derived concentration guide...

38

LA-14445-ENV Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

.................................................................................................................................5-70 8. White Rock Canyon Springs ................................................................................................................................... 7-6 5. TAL Elements: Follow-up of 2009 Results of Soil Manganese at Two Mile Mesa at TA-6

39

DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited  

E-Print Network (OSTI)

reinforcement corrosion in reinforced concrete, recycling and reuse of waste materials and industrial by materials, and waste management. He developed new types of cements based on calcined clays and laterites, insoluble gypsum, and binders for wastes immobilization. To date, more than 200 scientific papers

US Army Corps of Engineers

40

MONTEREY, CALIFORNIA Approved for public release; distribution is unlimited  

E-Print Network (OSTI)

12b. DISTRIBUTION CODE A 13. ABSTRACT The Navy Non-nuclear Ordnance Requirements (NNOR) assessment determines annually the preferred inventory levels for most Navy munitions. This requirement determination current budgetary constraints (about $2 billion annually) by subjectively imposing a series of procurement

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Unlimited Energy GmbH | Open Energy Information  

Open Energy Info (EERE)

Unlimited Energy GmbH Unlimited Energy GmbH Jump to: navigation, search Name Unlimited Energy GmbH Place Berlin, Germany Zip 12435 Sector Solar, Wind energy Product Unlimited Energy is a German-based project developer, specialising in wind and solar projects. Coordinates 52.516074°, 13.376987° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.516074,"lon":13.376987,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

42

Energy Unlimited Wind Farm II | Open Energy Information  

Open Energy Info (EERE)

II II Facility Energy Unlimited Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Energy Unlimited Developer Energy Unlimited Energy Purchaser Southern California Edison Co Location San Gorgonio CA Coordinates 33.9095°, -116.734° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.9095,"lon":-116.734,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

43

Joule Unlimited previously Joule Biotechnologies | Open Energy Information  

Open Energy Info (EERE)

Joule Unlimited previously Joule Biotechnologies Joule Unlimited previously Joule Biotechnologies Jump to: navigation, search Name Joule Unlimited (previously Joule Biotechnologies) Place Cambridge, Massachusetts Zip 2142 Product Massachusetts-based industrial biotechnology company developing transformative systems to enable highly efficient, low-cost cell-based biodiesel production. Coordinates 43.003745°, -89.017499° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":43.003745,"lon":-89.017499,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

44

Energy Unlimited Wind Farm I | Open Energy Information  

Open Energy Info (EERE)

I I Facility Energy Unlimited Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Developer Energy Unlimited Energy Purchaser Southern California Edison Co Location San Gorgonio CA Coordinates 33.9095°, -116.734° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":33.9095,"lon":-116.734,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

45

Innovative Solutions Unlimited, LLC (InSolves) | Open Energy Information  

Open Energy Info (EERE)

Solutions Unlimited, LLC (InSolves) Solutions Unlimited, LLC (InSolves) Jump to: navigation, search Name Innovative Solutions Unlimited, LLC (InSolves) Address 1862 Shyville Road Place Piketon, Ohio Zip 45661 Sector Renewable Energy Product Consulting; Engineering/architectural/design; Maintenance and repair;Manufacturing; Retail product sales and distribution;Trainining and education;Other:Access Control / Security: Nuclear Phone number 740-289-3282 Website http://www.insolves.com Coordinates 39.0510662°, -82.9957658° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":39.0510662,"lon":-82.9957658,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

46

STI Releasing Officials | Scientific and Technical Information...  

Office of Scientific and Technical Information (OSTI)

release of STI in the public domain (i.e., unlimited announcement) or the application of DOE-approved access limitations, as well as other Public Law, Executive Orders, and...

47

Offset Printing, Production Services  

NLE Websites -- All DOE Office Websites (Extended Search)

Printing Printing Our full service print shop provides prepress services, single and multicolor offset printing, and complete bindery. We print Reports Forms Brochures, leaflets and flyers Name tags and meal tickets Newsletters, etc Prepress Electronic files and paper copy prepared for printing. Complete Bindery Apply address labels or tabs to printed material. Machine fold documents and insert into envelopes for mailing. Laminate printed items up to 35" wide. Numbering and perforating. Trimming, drilling, padding and stitching. Special Printing Special reports, full color printing, continuous and carbon forms printed through the U.S. Government Printing Office. Additional Information Printing can be reached on X2953 The supervisor is Rick Backofen who can be reached on X6183

48

Printing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Employee Services » Printing Employee Services » Printing Printing The Printing Team is the liaison between the U.S. Government Printing Office and the Department of Energy. It consists of an expert group of printing specialists who offer a full range of services from assistance in developing your printing requirements to the final printing, distribution and mailing of products. The printed products range from black and white to full color items. These Services are available through the Working Capital Fund. The Printing Office produces a complete range of high-quality printed products comparable to those available from a full-service commercial enterprise. These include: Reports Books Pamphlets and Brochures Public Information Materials Presentation and Promotional Posters Forms and Letterhead

49

DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. FM 6-20-50  

E-Print Network (OSTI)

of this publication is HQ TRADOC. Submit changes for improving this publication on DA Form 2028 (Recommended Changes and women are included. x #12;FM 6-20-50 CHAPTER 1 ORGANIZATION AND DUTIES Section I. LIGHT FORCES ORGANIZATION Mission Light forces deploy worldwide to conduct combat operations in low- and mid

US Army Corps of Engineers

50

DISTRIBUTION RESTRICTION: Approved for public release; distribution is unlimited. FM 6-20-40  

E-Print Network (OSTI)

for Control of Artillery The proponent of this publication is HQ TRADOC. Submit changes for improving 1 ORGANIZATION AND DUTIES Section I. HEAVY FORCES ORGANIZATION Mission The overall design

US Army Corps of Engineers

51

Approved for public release; distribution is unlimited. ERDC TN-DOER-E31  

E-Print Network (OSTI)

one of our most economically important pests in urban landscapes. Fire Ants cause extensive mounding (black dots show the location of each fire ant colony). Benefits · The ideal set of turf and landscape of landscape plants and turfgrasses can be identified that are repellent to Fire Ant foraging and mound

US Army Corps of Engineers

52

ERDC/CERL TN-13-1 February 2013 Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

.sirsi.net/client/search/asset:asset?t:ac=$N/1006361 #12;CASI 2013 Work Plan 17 Operational Energy Base Camp Studies: Literature Review of Findings #12;CASI 2013 Work Plan 10 Energy and Water Conservation Assessments: A Field Guide outlines common: IMCOM POC: James Westervelt, CERL #12;CASI 2013 Work Plan 16 Sustainable Energy Solutions Lead: Franklin

US Army Corps of Engineers

53

Approved for public release; further dissemination unlimited UCRL-ID-151320  

E-Print Network (OSTI)

of the resulting DEMO on the nuclear materials development, as most reactor components would see much lower neutron.g. diagnostics, theory and simulation, nuclear technology) being carried out in the base and tokamak programs needed? Advanced diagnostics Theory and simulation Support from base program, technology program BPX Non-nuclear

54

CONTRACTOR REPORT SAND97-2426 Unlimited Release UC-705 Penetration...  

Office of Scientific and Technical Information (OSTI)

which equation is correct for certain applications. Finally, new experimental data have led to limited changes in the basic equations. These changes, new equations, new database,...

55

Information Collection DISTRIBUTION RESTRICTION. Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

.2, Admin Chg.1 NUCLEAR MATERIAL CONTROL AND ACCOUNTABILITY CRD O 475.1 COUNTERINTELLIGENCE PROGRAM CRD O O 5639.8A SECURITY OF FOREIGN INTELLIGENCE INFORMATION AND SENSITIVE COMPARTMENTED INFORMATION

US Army Corps of Engineers

56

Approved for public release; distribution is unlimited. Prepared for U.S. Army Corps of Engineers  

E-Print Network (OSTI)

Washington, DC 20314-1000ABSTRACT: The primary issues affecting energy options are those of availability, affordability, sustainability, and security. Since energy resources are unevenly distributed around the world, and the impacts of energy consumption have global reach in both environmental and political terms, any meaningful review of energy-related issues must take a global perspective. This work synopsizes world and national energy issues (including energy source options, resource stocks, and future prognosis) in the context of how Army installations need to respond to changing trends. This report presents implications of actions that may be taken in response to the national and world energy situation, to help the Army to make informed choices on energy utilization that will contribute to sustaining the Army’s mission. DISCLAIMER: The contents of this report are not to be used for advertising, publication, or promotional purposes. Citation of trade names does not constitute an official endorsement or approval of the use of such commercial products. All product names and trademarks cited are the property of their respective owners. The findings of this report are not to be construed as an official Department of the Army position unless so designated by other authorized documents.

Donald F. Fournier; Eileen T. Westervelt September; Eileen T. Westervelt; Donald F. Fournier

2005-01-01T23:59:59.000Z

57

Approved for public release; distribution is unlimited. ERDC TN-DOER-E32  

E-Print Network (OSTI)

Report 262. Washington, DC: National Academy Press. Reine K. J., D. D. Dickerson, and D. G. Clarke. 1998EWsintendedtoprotecttheselectedspecies. BACKGROUND AND PROBLEM: Environmental windows (EWs) associated with dredging operations can be controversial, and monitoring environmental windows for dredging projects. Marine Board, Transportation Research Board. Special

US Army Corps of Engineers

58

Approved for public release; further dissemination unlimited UCRL-JC-152827  

E-Print Network (OSTI)

-0062 Telephone: (865) 576-8401 Facsimile: (865) 576-5728 E-mail: reports@adonis.osti.gov Available for the sale with a magnetized coaxial plasma gun. The Sustained Spheromak Physics Experiment [2] (SSPX) shown in Fig. 1 to the coaxial gun, nine magnetic field coils are utilized to shape the vacuum magnetic flux. This flexibility

59

E-print Network: Research Communications for Scientists and Engineers  

Office of Scientific and Technical Information (OSTI)

E-print Web Log E-print Web Log E-print Network E-print Network About Search Browse by Discipline Find Scientific Societies Receive E-print Alerts Contact Us Help Home Site Map OSTI DOE For Immediate Release January 10, 2005 For more information, contact: Alison Buckholtz, SPARC, alison@arl.org Susan Tackett, OSTI, tacketts@osti.gov DOE/OSTI's E-PRINT NETWORK SELECTED AS SPARC PARTNER Provides Research Communications and Full-Text Searching of Science Websites and Databases Washington, DC -SPARC (the Scholarly Publishing and Academic Resources Coalition) today announced that the E-print Network, a free service of the U.S. Department of Energy (DOE) Office of Scientific and Technical Information (OSTI), has been chosen as a SPARC Scientific Communities partner. The selection recognizes the contribution of the E-print Network to expanded availability and use of open-access scientific and technical research on the Internet.

60

Coexistence of unlimited bipartite and multipartite Einstein-Podolsky-Rosen entanglement  

E-Print Network (OSTI)

Quantum mechanics imposes 'monogamy' constraints on the sharing of entanglement. We show that, despite these limitations, entanglement can be simultaneously present in unlimited two-body and many-body forms in continuous variable systems. This is demonstrated in experimentally producible multimode states of light fields or atomic ensembles, which therefore enable infinitely more freedom in the distribution of information, as opposed to system of qubits where such entanglement structure is impossible. This is a central finding for the quantification, understanding and potential exploitation of shared quantum correlations, and may lead to novel realisations of robust multiparty communication networks and scalable quantum computation.

Adesso, G; Illuminati, F; Adesso, Gerardo; Ericsson, Marie; Illuminati, Fabrizio

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Second Printing November 1990  

E-Print Network (OSTI)

Electronic VersionAbout WMRC's Electronic Publications: This document was originally published in a traditional format. It has been transferred to an electronic format to allow faster and broader access to important information and data. While the Center makes every effort to maintain a level of quality during the transfer from print to digital format, it is possible that minor formatting and typographical inconsistencies will still exist in this document. Additionally, due to the constraints of the electronic format chosen, page numbering will vary slightly from the original document. The original, printed version of this document may still be available. Please contact WMRC for more information: WMRC

David Thomas; Lon Carlson; Walt Mikucki; Rachel Baker; John Warren; Doug Maxelner; Eliliott Zimmermann; Claudia Washburn; David Thomas; Lon Carlson; Walt Mikucki; Rachel Baker; John Warren; Doug Maxeiner; Elliott Zimmermann; Claudia Washburn; James R. Thompson

1990-01-01T23:59:59.000Z

62

Multiple Crystal Cavities for Unlimited X-ray Energy Resolution and  

NLE Websites -- All DOE Office Websites (Extended Search)

An Intriguing Twist in the Structure of a Cobalt Oxide Catalyst An Intriguing Twist in the Structure of a Cobalt Oxide Catalyst Breaking Records in Neurological Microradiology Exposing Valence-Bond Model Inadequacies Plants' Rapid Response System Revealed Rewriting the Organofluorine Playbook Science Highlights Archives: 2013 | 2012 | 2011 | 2010 2009 | 2008 | 2007 | 2006 2005 | 2004 | 2003 | 2002 2001 | 2000 | 1998 | Subscribe to APS Science Highlights rss feed Multiple Crystal Cavities for Unlimited X-ray Energy Resolution and Coherence AUGUST 21, 2012 Bookmark and Share Fabry-Perot resonance spectra (right) of a single-cavity resonator, two cascaded resonators, and a monolithic two-cavity resonator, respectively. Note the significant background of T1 as the Bragg reflectivity from a 10-μm diamond plate is only 59%. By comparison, spectra T2 and T3 are very

63

Silver Ink for Conductor Printing  

Many applications require the ability to print conductors on devices that cannot tolerate high temperatures. Current methods for making printable ...

64

Organic vapor jet printing system  

DOE Patents (OSTI)

An organic vapor jet printing system includes a pump for increasing the pressure of an organic flux.

Forrest, Stephen R

2012-10-23T23:59:59.000Z

65

Unlimited editions: three approaches to the dissemination and display of digital art  

Science Conference Proceedings (OSTI)

The paper reflects on three approaches to the dissemination and display of digital art. \\'1c"s[edition]\\'1d" is a novel, web-based service that offers limited editions of "\\'1cdigital prints"\\'1d. Analysis of user comments suggests that the metaphor ... Keywords: art, digital culture, ethnography, interaction design

Mark Blythe; Jo Briggs; Jonathan Hook; Peter Wright; Patrick Olivier

2013-04-01T23:59:59.000Z

66

Approved For Public Release; Distribution Is Unlimited Prepared for Headquarters, U.S. Army Corps of Engineers.  

E-Print Network (OSTI)

The contents of this report are not to be used for advertising, publication, or promotional purposes. Citation of trade names does not constitute an official endorsement or approval of the use of such commercial products. ta PRINTEDON IUX!YCIED PAPERInstallation Restoration Research Program Technical Report IRRP-94-I

R. Mark Bricks; Clint W. Williford; Larry W. Jones; R. Mark Bricks; Clint W. Wllliford; Larry W. Jones

1994-01-01T23:59:59.000Z

67

AREA EMCS DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. MIL-HDBK-237C  

E-Print Network (OSTI)

THE ACQUISITION PROCESS This handbook is for guidance only. Do not cite this document as a requirement. AMSC N/A

unknown authors

1997-01-01T23:59:59.000Z

68

Approved for public release; distribution is unlimited. Prepared for Under U.S. Army Corps of Engineers  

E-Print Network (OSTI)

Work Unit No. CFE-GB03ABSTRACT: This study evaluates onsite and regional options for providing heat and power to Fort Wainwright,

Curtis L. Bagnall; Anthony C. Taladay; John L. Vavrin; William T. Brown; Er M. Zhivov; Michael R; Curtis L. Bagnall; Anthony C. Taladay; John L. Vavrin; William T. Brown; Er M. Zhivov; Michael R. Kemme

2005-01-01T23:59:59.000Z

69

Profit-charging market makers with bounded loss, vanishing bid/ask spreads, and unlimited market depth  

Science Conference Proceedings (OSTI)

Four desiderata for automated market makers have appeared in the literature: (1) bounded loss, (2) the ability to make a profit, (3) a vanishing bid/ask spread, and (4) unlimited market depth. Intriguingly, market makers that satisfy any three ... Keywords: algorithmic finance, automated market makers, financial markets, liquidity, market making, market microstructure, markets, prediction markets, wagering

Abraham Othman; Tuomas Sandholm

2012-06-01T23:59:59.000Z

70

Coaxial silicon nanowires as solar cells and nanoelectronic power sources  

E-Print Network (OSTI)

(EERE) Fuel Cell Technologies Program (FCT) Solar Thermochemical Hydrogen Production R&D portfolioSANDIA REPORT SAND2011-3622 Unlimited Release Printed May 2011 Solar Thermochemical Hydrogen://www.ntis.gov/help/ordermethods.asp?loc=7-4-0#online #12;3 SAND2011-3622 Unlimited Release Printed May 2011 Solar Thermochemical Hydrogen

Marcus, Charles

71

Roll Printed Electronics: Development and Scaling of Gravure Printing Techniques  

E-Print Network (OSTI)

gravure printing of indium tin oxide nanoparticle patternsfor the deposition of indium tin oxide nanoparticles forwith and without Indium Zinc Oxide (IZO) conductive layers

de la Fuente Vornbrock, Alejandro

2009-01-01T23:59:59.000Z

72

Nano-contact printing of DNA monolayers  

E-Print Network (OSTI)

Technology today is directed towards building smaller devices. To accommodate this development, printing methods are needed. Some printing methods that are used include lithography, micro-contact printing, and inkjet ...

Tong, Angela, 1983-

2005-01-01T23:59:59.000Z

73

Public Law 102-392 for Printing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing Public Law 102-392 for Printing More Documents & Publications Minutes from the Print and Mail...

74

Coexistence of unlimited bipartite and genuine multipartite entanglement: Promiscuous quantum correlations arising from discrete to continuous variable systems  

E-Print Network (OSTI)

Quantum mechanics imposes 'monogamy' constraints on the sharing of entanglement. We show that, despite these limitations, entanglement can be fully 'promiscuous', i.e. simultaneously present in unlimited two-body and many-body forms in states living in an infinite-dimensional Hilbert space. Monogamy just bounds the divergence rate of the various entanglement contributions. This is demonstrated in simple families of N-mode (N >= 4) Gaussian states of light fields or atomic ensembles, which therefore enable infinitely more freedom in the distribution of information, as opposed to systems of individual qubits. Such a finding is of importance for the quantification, understanding and potential exploitation of shared quantum correlations in continuous variable systems. We discuss how promiscuity gradually arises when considering simple families of discrete variable states, with increasing Hilbert space dimension towards the continuous variable limit. Such models are somehow analogous to Gaussian states with asymptotically diverging, but finite squeezing. In this respect, we find that non-Gaussian states (which in general are more entangled than Gaussian states), exhibit also the interesting feature that their entanglement is more shareable: in the non-Gaussian multipartite arena, unlimited promiscuity can be already achieved among three entangled parties, while this is impossible for Gaussian, even infinitely squeezed states.

Gerardo Adesso; Marie Ericsson; Fabrizio Illuminati

2006-09-22T23:59:59.000Z

75

Coexistence of unlimited bipartite and genuine multipartite entanglement: Promiscuous quantum correlations arising from discrete to continuous-variable systems  

SciTech Connect

Quantum mechanics imposes 'monogamy' constraints on the sharing of entanglement. We show that, despite these limitations, entanglement can be fully 'promiscuous', i.e., simultaneously present in unlimited two-body and many-body forms in states living in an infinite-dimensional Hilbert space. Monogamy just bounds the divergence rate of the various entanglement contributions. This is demonstrated in simple families of N-mode (N{>=}4) Gaussian states of light fields or atomic ensembles, which therefore enable infinitely more freedom in the distribution of information, as opposed to systems of individual qubits. Such a finding is of importance for the quantification, understanding, and potential exploitation of shared quantum correlations in continuous variable systems. We discuss how promiscuity gradually arises when considering simple families of discrete variable states, with increasing Hilbert space dimension towards the continuous variable limit. Such models are somehow analogous to Gaussian states with asymptotically diverging, but finite, squeezing. In this respect, we find that non-Gaussian states (which in general are more entangled than Gaussian states) exhibit also the interesting feature that their entanglement is more shareable: in the non-Gaussian multipartite arena, unlimited promiscuity can be already achieved among three entangled parties, while this is impossible for Gaussian, even infinitely squeezed states.

Adesso, Gerardo [Dipartimento di Fisica 'E. R. Caianiello', Universita degli Studi di Salerno, Via S. Allende, I-84081 Baronissi (Italy); CNR-INFM Coherentia , Naples (Italy) and INFN Sezione di Napoli-Gruppo Collegato di Salerno (Italy); Grup d'Informacio Quantica, Universitat Autonoma de Barcelona, E-08193 Bellaterra (Barcelona) (Spain); Ericsson, Marie [Centre for Quantum Computation, DAMTP, Centre for Mathematical Sciences, University of Cambridge, Wilberforce Road, Cambridge CB3 0WA (United Kingdom); Illuminati, Fabrizio [CNR-INFM Coherentia , Naples (Italy) and INFN Sezione di Napoli-Gruppo ollegato di Salerno (Italy); Dipartimento di Matematica e Informatica Universita degli Studi di Salerno, Via Ponte don Melillo, I-84084 Fisciano (Italy); ISI Foundation for Scientific Interchange, Viale Settimio Severo 65, I-10133 Turin (Italy)

2007-08-15T23:59:59.000Z

76

Add your e-prints to the E-print Network -- Energy, science,...  

Office of Scientific and Technical Information (OSTI)

Add E-prints We invite you to submit your e-prints to the network. Having your e-prints in the network increases awareness of them and promotes the dissemination of your...

77

Print the Fuel Economy Guide  

NLE Websites -- All DOE Office Websites (Extended Search)

Print the Fuel Economy Guide Print the Fuel Economy Guide 2014 Fuel Economy Guide 2014 Fuel Economy Guide Adobe Acrobat Icon MPG data updated December 19, 2013 The annual fuel cost estimates in the 2008-2014 electronic fuel economy guides are updated weekly to match EIA's current national average prices for gasoline and diesel fuel. Order a printed copy: Order Note that the published guides may not be as up-to-date at the downloadable version. View vehicles from 1984 to the present: Go to Find-a-Car Unlike the annual guides which cover only one model year, Find-a-Car provides the most up-to-date fuel economy information for vehicles from model year 1984 to the present, along with environmental and safety data. Find a Car Developer Tools 2013 Fuel Economy Guide 2013 Fuel Economy Guide Adobe Acrobat Icon

78

E-Print Network 3.0 - User Login  

Office of Scientific and Technical Information (OSTI)

Home About Advanced Search Browse by Discipline Scientific Societies E-print Alerts Add E-prints E-print Network E-print Network Skip to main content FAQ * HELP * SITE MAP *...

79

Printed optics: 3D printing of embedded optical elements for interactive devices  

Science Conference Proceedings (OSTI)

We present an approach to 3D printing custom optical elements for interactive devices labelled Printed Optics. Printed Optics enable sensing, display, and illumination elements to be directly embedded in the casing or mechanical structure ... Keywords: 3d printing, additive manufacturing, display, light, optics, projection, rapid prototyping, sensing

Karl Willis; Eric Brockmeyer; Scott Hudson; Ivan Poupyrev

2012-10-01T23:59:59.000Z

80

Open Archive TOULOUSE Archive Ouverte (OATAO) OATAO is an open access repository that collects the work of Toulouse researchers and  

E-Print Network (OSTI)

SAND REPORT SAND2004-2871 Unlimited Release August 19, 2004 A Mathematical Framework for Multiscale://www.ntis.gov/ordering.htm #12;SAND2004-2871 Unlimited Release Printed August 19, 2004 A Mathematical Framework for Multiscale] for coupling finite elements (FE), classical molecular dynamics (MD), and tight binding (TB) quantum

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

OSTI's E-print Network continues rapid growth | OSTI, US Dept of Energy,  

Office of Scientific and Technical Information (OSTI)

NEWS MEDIA CONTACT: NEWS MEDIA CONTACT: Cathey Daniels, (865) 576-9539 FOR IMMEDIATE RELEASE January 17, 2006 OSTI's E-print Network continues rapid growth Created by scientists for scientists, expanded 39 percent in past year Oak Ridge, TN - The E-print Network (www.osti.gov/eprints), a communications hub created by scientists for scientists worldwide, currently provides full-text searching of more than 730,000 e-print documents from scientific Web sites - an increase of 39 percent since January 2005. More than 100,000 documents were added to the network in the past three months. In addition, this rapidly expanding network provides one-stop browse/search access to more than 19,650 scientific Web sites containing e-prints, as well as deep Web searching across 52 major databases containing close to 20

82

OSTI's E-print Network continues rapid growth | OSTI, US Dept of Energy,  

Office of Scientific and Technical Information (OSTI)

Office of Scientific & Technical Information Office of Scientific & Technical Information NEWS MEDIA CONTACT: Cathey Daniels, (865) 576-9539 FOR IMMEDIATE RELEASE January 17, 2006 OSTI's E-print Network continues rapid growth Created by scientists for scientists, expanded 39 percent in past year Oak Ridge, TN - The E-print Network (www.osti.gov/eprints), a communications hub created by scientists for scientists worldwide, currently provides full-text searching of more than 730,000 e-print documents from scientific Web sites - an increase of 39 percent since January 2005. More than 100,000 documents were added to the network in the past three months. In addition, this rapidly expanding network provides one-stop browse/search access to more than 19,650 scientific Web sites containing e-prints, as well as deep Web searching across 52 major databases containing close to 20

83

Print - Lawrence Livermore National Laboratory  

Solar power is a renewable source of energy that involves no fossil fuel combustion, and releases no greenhouse gases. In the past, solar power has not been ...

84

Printed optics: 3d printing of embedded optical elements for interactive devices  

E-Print Network (OSTI)

a b c d Figure 1: Custom optical elements are fabricated with 3D printing and embedded in interactive devices, opening up new possibilities for interaction including: unique display surfaces made from 3D printed ‘light pipes ’ (a), novel internal illumination techniques (b), custom optical sensors (c), and embedded optoelectronics (d). We present an approach to 3D printing custom optical elements for interactive devices labelled Printed Optics. Printed Optics enable sensing, display, and illumination elements to be directly embedded in the casing or mechanical structure of an interactive device. Using these elements, unique display surfaces, novel illumination techniques, custom optical sensors, and embedded optoelectronic components can be digitally fabricated for rapid, high fidelity, highly customized interactive devices. Printed Optics is part of our long term vision for interactive devices that are 3D printed in their entirety. In this paper we explore the possibilities for this vision afforded by fabrication of custom optical elements using today’s 3D printing technology.

Karl D. D. Willis; Eric Brockmeyer; Scott E. Hudson; Ivan Poupyrev

2012-01-01T23:59:59.000Z

85

Print  

NLE Websites -- All DOE Office Websites (Extended Search)

GFDL GCM Model Output with ARM CMBE Dataset: A First Look GFDL GCM Model Output with ARM CMBE Dataset: A First Look Jean-Christophe Golaz, UCAR VSP, GFDL Leo J. Donner and V. Ramaswamy, Geophysical Fluid Dynamics Laboratory, Princeton, NJ U . S . D E P A R T M E NT O F C O M M E R C E N A TION A L O C E A N I C A N D A T MO S P H E R I C A D M I N I S T R ATIO N What is CMBE? - CMBE (Climate Modeling Best Estimate) is a new ARM dataset specifically designed to evaluate climate models against ARM observations. - CMBE contains best estimates of selected ARM measurements: cloud fraction, surface radiation fluxes, total cloud cover, liquid water path, precipitable water vapor. - For more information on CMBE: http://science.arm.gov/wg/cpm/scm/best_estimate.html GFDL GCM models used in this comparison - AM2.1: current version of the atmospheric model (GFDL Global Atmosphere

86

Print  

NLE Websites -- All DOE Office Websites (Extended Search)

Fungi play key roles in DOE- Fungi play key roles in DOE- relevant missions of bioenergy production, bioremediation and carbon cycling. In bioenergy proj- ects alone, for example, fungal genome data have been used not only to ensure the health of crops that serve as biomass feedstocks but also provide enzymes that can break down the biomass as well as help convert it to transportation fuel. The DOE JGI has developed a Fungal Genomics Program headed by Igor Grigoriev. The program's first project, launched October 1, is the Genome Encyclopedia of Fungi (GEF). The program aims to explore fungi's ecological diversity and breadth across the Tree of Life for DOE-relevant science and applications. DOE JGI pioneered sequenc- ing and analysis of several fungi important for lignocellu- lose degradation, enzyme pro-

87

Print  

FLC Far West is one of six regions covering the United States and is comprised of 8 western states, Alaska, Arizona, California, Hawaii, Idaho, Nevada, ...

88

Print  

Science Conference Proceedings (OSTI)

Basics of Combustion and Environmental Considerations * Typical Burners Used in Aluminum Cast Houses * Blowers/Exhausters * Dioxin and Furan Issues

89

Print  

Science Conference Proceedings (OSTI)

This presentation will cover the basics of fan design. It will give you the understanding of how to read a fan curve and where they come from. It will also cover the ...

90

Print  

Science Conference Proceedings (OSTI)

He has lectured at universities and numerous 'schools' regarding neutron and synchrotron radiation. Liss supervises students, gives user support, acts on ...

91

Print  

Science Conference Proceedings (OSTI)

Mining and processing are energy intensive and the usage of energy in the industry will ... He chaired the Green Processing 2002 and 2004 conferences of the ...

92

Print  

Science Conference Proceedings (OSTI)

OVERVIEW. Pot emissions; Environmental regulations and permits; History of GTCs. FLUORIDE EMISSIONS. The Gaseous and Particulate Forms of Fluorides  ...

93

Print  

Science Conference Proceedings (OSTI)

For example, uranium dioxide (UO2) is the primary nuclear fuel in light-water reactors. ... He graduated from Ohio Wesleyan University in 1978 (BA in Physics  ...

94

Print  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore National Security, LLC ...

95

Print  

Nondisclosure Agreement (NDA) A Nondisclosure Agreement (NDA), or confidentiality agreement, governs disclosure of non-public business information that the parties to ...

96

Print  

Science Conference Proceedings (OSTI)

... and application of LCA in mining, mineral processing, and metal production. ... of environmental impacts and external costs of production and consumption.

97

Print  

One of my most interesting projects is reviewing the office actions for ... management consulting in ... market and the economic and environmental ...

98

Print  

An LLNL developed laser has been adapted into a process called laser peening for use by industry to provide critical metal components with economical protection ...

99

Print  

About IPO. The LLNL Industrial Partnerships Office (IPO), with its staff of scientists, engineers, attorneys, and entrepreneurs, is the conduit through which the ...

100

Print  

Students. IPO has successfully collaborated with business schools and entrepreneurial centers in ongoing business plan competitions by offering LLNL technologies that ...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Print  

Lawrence Livermore National Laboratory (LLNL) is a national resource, with outstanding scientific and technical capabilities. LLNL has for many years been a leader ...

102

Print  

Science Conference Proceedings (OSTI)

His academic career has been in close collaboration with the aluminium industry, including Alcan Int. Banbury and LSM Rotherham United Kingdom, and led to ...

103

Print  

Science Conference Proceedings (OSTI)

His engineering work in industry, government and academia has led to breakthroughs from mathematical modeling of phase transformations with fluid- structure ...

104

Print  

Science Conference Proceedings (OSTI)

... will teach how open top ring furnace(s) should be operated to bake anodes properly and avoid these potential issues while minimizing fuel consumption.

105

Print  

Science Conference Proceedings (OSTI)

Secondly, TOC provides very clear focus for prioritizing variation reduction and the strategic use of inventory and protective capacity to manage and improve ...

106

Print  

Science Conference Proceedings (OSTI)

Mark has more than 20 years in the metallurgical industry (nickel, ferro-nickel, zinc, copper, magnesium, aluminium and materials) in plant operations, project ...

107

Print  

Science Conference Proceedings (OSTI)

In addition to his academic research, Reynolds has also served as a consultant to SKB (The Swedish Nuclear Fuel and Waste Management Company) for their ...

108

Print  

Virtual reality display techniques developed for glasses free stereoscopic visualization can be connected to remote twin video inputs.

109

Print  

Science Conference Proceedings (OSTI)

She held a joint postdoctoral appointment in Materials Science at Queen Mary, University of London and Anatomy and Developmental Biology at University ...

110

Print  

Industrial Partnerships Office P.O. Box 808, L-795 Livermore, CA 94551 Phone: (925) 422-6416 Fax: (925) 423-8988 Operated by Lawrence Livermore ...

111

Print  

Hydrogen peroxide based explosive systems have become a concern for transportation safety and security, especially because of events such as the 2005 ...

112

Print  

Operated by Lawrence Livermore National Security, LLC, for the Department of Energy's National Nuclear Security Administration

113

Print  

This will assist emergency responders and aid in protecting public health. This copolymer and solvent solution is used to bind with airborne hazardous ...

114

Printed circuit dispersive transmission line  

DOE Patents (OSTI)

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

1991-08-27T23:59:59.000Z

115

Printed circuit dispersive transmission line  

DOE Patents (OSTI)

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other.

Ikezi, Hiroyuki (Rancho Santa Fe, CA); Lin-Liu, Yuh-Ren (San Diego, CA); DeGrassie, John S. (Encinitas, CA)

1991-01-01T23:59:59.000Z

116

Printed circuit dispersive transmission line  

DOE Patents (OSTI)

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission lines between two adjacent periodic intersections to be longer than the other. 5 figs.

Ikezi, Hiroyuki; Lin-Liu, Yuh-Ren; deGrassie, J.S.

1990-03-02T23:59:59.000Z

117

Powerful tools at E-print Network  

Office of Scientific and Technical Information (OSTI)

Energy. These subject-based e-prints reside at institutional repositories, websites and data bases, remote locations worldwide. About two million of these research documents are...

118

All the items fit to print  

Science Conference Proceedings (OSTI)

3D printing has come of age. It promises to revolutionize a wide range of industries and profoundly change the way people buy and consume.

Samuel Greengard

2013-07-01T23:59:59.000Z

119

This document has undergone formal review and approval and been reviewed by a Derivative Classifier, and its contents have been deemed unclassified, unlimited release.  

E-Print Network (OSTI)

include dialog (such as a pretask plan or tailgate meeting), document (such as checklist or permit Expectations Plan Work Review of SNL Jobsite Hazard Evaluation Checklist Understand existing conditions/restrictions identified on the hazard evaluation checklist. Contractor, Subcontractors, and workers are aware

120

High quality offset printing: an evolutionary approach  

Science Conference Proceedings (OSTI)

Print media are still very important for everyone's daily life. Current efforts are concerned with the application of the well-established offset-printing technology to other media, particularly cardboards, which require some substantial adaptations. ... Keywords: evolutionary algorithms, image processing, industrial application

Ralf Joost; Ralf Salomon

2007-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

2012, 2012, VII, 127 p. Printed book  

E-Print Network (OSTI)

2012, 2012, VII, 127 p. Printed book Hardcover 99,95 | £90.00 | $129.00 *106,95 (D) | 109,95 (A) | CHF 133.50 eBook Available from libraries offering Springer's eBook Collection.com/ebooks MyCopy Printed eBook exclusively available to patrons whose library offers Springer's eBook

Geest, Harm G. van der

122

Silver lines electrode patterned by transfer printing  

Science Conference Proceedings (OSTI)

This paper reports a novel method for the fabrication of silver electrode with high resolution using transfer printing method. The resolution can reach to 30@mm with high electrical conductivity as we keep a large depth and micro-size particles of the ... Keywords: Transferring printing

Liangjin Ge; L. Jay Guo; Xudi Wang; Shaojun Fu

2012-09-01T23:59:59.000Z

123

Berkeley Lab UNIX-based Distributed Printing (DP)  

NLE Websites -- All DOE Office Websites (Extended Search)

Berkeley Lab UNIX-based Distributed Printing (DP) Berkeley Lab UNIX-based Distributed Printing (DP) LBNL Computing Services supports a variety of printers located throughout the Laboratory through its UNIX-based Distributed Printing System. Make sure to read the UNIX distributed printing overview. See Novell printing for information on Novell-based printing here. Berkeley Lab UNIX-based Distributed Printing (DP) Information Overview Print commands Print charges Printer lists (by division, etc.) Add a new DP printer name paper sizes (a4, etc.) Fixes for common problems Deleting print jobs on Solaris Printer-specific information Groff (GNU ditroff) on Sun & SGI System Admin Information CUPS printing information CUPS FAQ LINUX test suite of files; etc. Setting default printer using lpoptions Test suite of print files

124

E-print Network Alert Service  

Office of Scientific and Technical Information (OSTI)

E-print Web Log E-print Web Log alert image About Search Browse by Discipline Find Scientific Societies Receive E-print Alerts Contact Us Help Home Site Map OSTI DOE Welcome to E-print Alerts! This feature can be used to automatically keep abreast of the latest e-prints posted on ArXiv databases as well as a number of other science and engineering databases and Web sites, based on a search profile you submit to us. You can even receive new postings from a number of sites by submitting a single profile based on your specific area of interest. The Service is free, and you can create as many profiles as you wish. Simply register for the Service and create your search strategies for your profiles. This will be run against all selected databases and Web sites, and you will receive a weekly Alert via e-mail with the results of your automatic profile search.

125

Minutes from the May 26, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

26, 2010 26, 2010 Printing and Mail Managers Exchange Forum Teleconference Seventeen individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the FY 2010, Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that Headquarters received responses from all DOE printing and duplicating facilities. The report is due to the Congressional Joint Committee on Printing no later than May 31, 2010.

126

Dispenser Printed Zinc Microbattery with an Ionic Liquid Gel Electrolyte  

E-Print Network (OSTI)

Ink-jet printed carbon supercapacitor electrodes on gold,Ink-jet printed carbon supercapacitor electrodes on gold,Microcapacitors Thin film supercapacitor (TFSC) research has

Ho, Christine Chihfan

2010-01-01T23:59:59.000Z

127

Industrial Uses of Vegetable OilsChapter 9 Printing Inks  

Science Conference Proceedings (OSTI)

Industrial Uses of Vegetable Oils Chapter 9 Printing Inks Processing eChapters Processing Press Downloadable pdf of Chapter 9 Printing Inks from the book ...

128

E-print Network : Main View : Deep Federated Search  

Office of Scientific and Technical Information (OSTI)

E-print Network E-print Network Search Powered By Deep Web Technologies New Search Preferences E-print Network E-print Network Skip to main content FAQ * HELP * SITE MAP * CONTACT US Home * About * Advanced Search * Browse by Discipline * Scientific Societies * E-print Alerts * Add E-prints Powered by Deep Web Technologies E-print Network E-print Network Skip to main content FAQ * HELP * SITE MAP * CONTACT US Home * About * Advanced Search * Browse by Discipline * Scientific Societies * E-print Alerts * Add E-prints Main View This view is used for searching all possible sources. Due to the varied configuration and diversity of web pages and databases searched by E-prints, Full Record will search whatever data is searchable at each site. Multiple arXiv sites under one general heading are combined

129

Minutes from the Print and Mail Managers Exchange Forum Teleconferences |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Minutes from the Print and Mail Managers Exchange Forum Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences Minutes from the Print and Mail Managers Exchange Forum Teleconferences. Contact the Office of Administrative Management and Support at (202) 586-4318 with any questions. Last updated 04/01/13 Minutes from the March 14, 2013 Printing and Mail Teleconference Minutes from the January 10, 2013 Printing and Mail Teleconference Minutes from the November 01, 2012 Printing and Mail Teleconference Minutes from the June 28, 2012 Printing and Mail Teleconference Minutes from the May 03, 2012 Printing and Mail Teleconference Minutes from the February 23, 2012 Printing and Mail Teleconference Minutes from the October 26, 2011 Printing and Mail Teleconference

130

Widget:PrintFullVersionButton | Open Energy Information  

Open Energy Info (EERE)

PrintFullVersionButton PrintFullVersionButton Jump to: navigation, search This widget creates a button, which create a button matching the PrintPDF button style, which will direct the user to the assembled page. This template assumes the existence of the PrintPDFButton widget and template. Parameters page - The wiki address of the assembled page, or full version to be printed. cover - The name of a wiki page to use as a cover page (optional) Dependencies Template:PrintFullVersionButton Template:PrintPDFButton Widget:PrintPDFButton Usage This Widget assumes the existence of HTML elements created by the PrintFullVersionButton template, and is called via that template. {{PrintFullVersionButton}} Example {{PrintFullVersionButton}} (displays in the upper right corner of the page) Retrieved from

131

Clean Cities: Clean Cities Print Products and Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

Print Products and Print Products and Templates to someone by E-mail Share Clean Cities: Clean Cities Print Products and Templates on Facebook Tweet about Clean Cities: Clean Cities Print Products and Templates on Twitter Bookmark Clean Cities: Clean Cities Print Products and Templates on Google Bookmark Clean Cities: Clean Cities Print Products and Templates on Delicious Rank Clean Cities: Clean Cities Print Products and Templates on Digg Find More places to share Clean Cities: Clean Cities Print Products and Templates on AddThis.com... Coordinator Basics Outreach Logos, Graphics, & Photographs Print Products & Templates Exhibit Booths Presentations Videos QR Codes Tips Education & Webinars Meetings Reporting Contacts Clean Cities Print Products and Templates Clean Cities has a wide variety of print products, marketing materials, and

132

Add your e-prints to the E-print Network -- Energy, science, and technology  

Office of Scientific and Technical Information (OSTI)

Add E-prints Add E-prints We invite you to submit your e-prints to the network. Having your e-prints in the network increases awareness of them and promotes the dissemination of your information to a broader audience. We do not add all submitted e-prints to our collection, and we cannot make any predictions or guarantees about when or if they will appear. See "What are the criteria for inclusion in the E-print Network?" Please enter your full URL, including the http:// prefix. For example: http://www.osti.gov/eprints/. You may also add comments or keywords that describe the content of your page. These are used only for our information and do not affect how your page is indexed or used. Label ID URL (required): Title (required): E-mail address (required): Your Name:

133

WIPP News Release Archives Index  

NLE Websites -- All DOE Office Websites (Extended Search)

WIPP News Release Archives 2006 News Releases 2005 News Releases 2004 News Releases 2003 News Releases 2002 News Releases 2001 News Releases 2000 News Releases 1999 News Releases...

134

Field Facilities Contacts for Printing and Mail  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Facilities Contacts for Printing and Mail Facilities Contacts for Printing and Mail Print and Mail Contacts Site Printing Contact Mail Contact NNSA, Albuquerque Deborah Miller (505) 845-6049 Thomas H. Clinkenbeard NNSA Service Center PO Box 5400 Albuquerque, NM 87185-5400 (505) 845-4602 tclinkenbeard@doeal.gov (mailto:tclinkenbeard@doeal.gov) Argonne National Laboratory Doreen Schoening Argonne National Laboratory U.S. Department of Energy 9700 South Cass Avenue Blvd 340 Lemonmt, IL 60439 (630) 840-6399 dschoening@anl.gov (mailto:dschoening@anl.gov) Bechtel Jacobs James Hughes Bechtel Jacobs - Mail Stop 7294 U.S. Department of Energy PO Box 4699 Oak Ridge, TN 37831 (865) 576-8423 Berkeley Site Office Mercedes Downing Berkeley Site Office U.S. Department of Energy 1 Cyclotron Road Bldg 90

135

E-print Network : User Account  

Office of Scientific and Technical Information (OSTI)

E-print Network Reset your password Enter either your User Name or Email Address to reset your password. User Name: Email Address: Go Some links on this page may take you to...

136

E-print Network : User Account  

Office of Scientific and Technical Information (OSTI)

New Search | My Selections (0) | | | | Alerts | E-print Network Create User Account User Name: Email Address: I want to: Always receive emails Receive emails if there are new...

137

Inkjet printed electronics using copper nanoparticle ink  

E-Print Network (OSTI)

but it had high electrical resistivity of 140 nX m, which isInstruments, USA). An electrical resistivity was calculatedlength, and q is the electrical resistivity of an printed

Kang, Jin Sung; Kim, Hak Sung; Ryu, Jongeun; Thomas Hahn, H.; Jang, Seonhee; Joung, Jae Woo

2010-01-01T23:59:59.000Z

138

Modeling and optimization of stencil printing operations: A comparison study  

Science Conference Proceedings (OSTI)

This paper presents a comparison study for the optimization of stencil printing operations using hybrid intelligence technique and response surface methodology (RSM). An average 60% of soldering defects are attributed to solder paste stencil printing ... Keywords: DPMO, Fuzzy quality loss function, Genetic algorithms, Neural network, Printed circuit board, Stencil printing, Surface mount technology

Tsung-Nan Tsai

2008-04-01T23:59:59.000Z

139

Conductive inkjet printed DIY music control surface  

Science Conference Proceedings (OSTI)

We developed a novel music control sensate surface, which enables retrofit integration between any musical instruments with a versatile, customizable, and essentially cost-effective user interface. Our project presents new opportunities in customizable, ... Keywords: conductive inkjet printing, music interfaces, rapid ui prototyping

Nan-Wei Gong; Nan Zhao; Joseph A. Paradiso

2013-04-01T23:59:59.000Z

140

Federal Recycling Program Printed on recycled paper.  

E-Print Network (OSTI)

#12;Federal Recycling Program Printed on recycled paper. The Forest Health Technology Enterprise. This book was pub- lished by FHTET as part of the technology transfer series. http.S. Department of Agriculture (USDA) prohibits discrimination in all its programs and activities on the basis

Hoddle, Mark S.

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Print this Page Close The nuclear deal  

E-Print Network (OSTI)

that the US will adopt to the demands of Pakistan and Israel, which will also claim to be responsible nuclearPrint this Page Close The nuclear deal July 20, 2005 | 19:05 ISTT P Sreenivasan | y assuming the same responsibilities and practices as leading countries with nuclear technologies 'such as the United

142

Profile Optimization for Wet-Printed Polymer Films  

E-Print Network (OSTI)

of a spin-coated film. In the next chapter, a dry printing method will be introduced, which has superior

143

--PRESS RELEASE--  

NLE Websites -- All DOE Office Websites (Extended Search)

NEWS RELEASE NEWS RELEASE Global Energy, Inc. For Immediate Release GLOBAL ENERGY INC. AND WABASH VALLEY POWER RELAUNCH WABASH GASIFICATION FACILITY AS SG SOLUTIONS LLC Cincinnati and Indianapolis, February 7, 2005 - Global Energy Inc. and Wabash Valley Power Association announced today that they have formed SG Solutions LLC to move the Wabash Gasification Facility forward to achieve base load operations and future growth. SG Solutions LLC (SGS) is owned 50/50 by Wabash Valley Power Association and Wabash River Energy, a unit of Global Energy Inc. In recent years the Wabash Gasification Facility has operated under a demanding market-based contract which challenged the operation to make very low cost synthetic gas. As a result, Wabash has consistently produced synthetic gas with a

144

Piezoelectric Drop-on-Demand Inkjet Printing of Rat Fibroblast Cells: Survivability Study and Pattern Printing  

E-Print Network (OSTI)

A novel piezoelectric, drop-on-demand (DOD) inkjet system has been developed and used to print L929 rat fibroblast cells. We investigate the survivability of the cells subjected to the large stresses during the printing process. These stresses are varied by changing the diameter of the orifice (36 to 119 microns) through which the cells are dispensed, as well as changing the electrical pulse used to drive the piezoelectric element. It is shown that for the smallest 36 microns diameter orifice, cell survival rates fall from 95% to approximately 76% when the ejection velocity is increased from 2 to 16 m/s. This decrease in survival rates is less significant when the larger orifice diameters of 81 microns and 119 microns are used. Analysis shows that there is a clear inverse relationship between cell survival rates and the mean shear rates during drop formation. By using the same printing set-up, fibroblast cells are printed onto alginate and collagen into patterns. Printed cells are cultured over a period of days to verify their long-term viability. Fibroblasts printed onto the collagen are found to successfully adhere, spread and proliferate, subsequently forming a denser patterns after 5 days in culture. Cell agglomeration is found to affect the printing performance, especially for the printhead with the smallest orifice, leading to frequent clogging of the nozzle. We also study the number of cells in each droplet, when printed under optimal conditions. The probability density of this number follows a binomial distribution, which consistent with a uniform distribution of cells in the medium and within the printhead.

Er Qiang Li; Eng Khoon Tan; Sigurdur Tryggvi Thoroddsen

2013-10-02T23:59:59.000Z

145

Press Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Release Press Release LLNL garners 'Best in Class' award from NNSA April 30, 2012 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) today congratulated its national laboratories and sites for achievements in environmental stewardship, awarding a total of 24 Pollution Prevention (P2) Awards for innovative initiatives across the enterprise. The P2 Awards recognize performance in integrating environmental stewardship practices that helps to reduce risk, protect natural resources and enhance site operations. "I applaud the work done at NNSA's sites in finding creative ways to reduce the environmental impact of our work," said NNSA's Deputy Administrator for

146

Preliminary Release: March 28, 2011",,,,,,,,,,,,"Released: April 2013","Released  

U.S. Energy Information Administration (EIA) Indexed Site

,,,,,,,,,,,,"Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013"

147

Department of Energy Strategic Plan, May 2011, Print Quality | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Department of Energy Strategic Plan, May 2011, Print Quality Department of Energy Strategic Plan, May 2011, Print Quality Department of Energy Strategic Plan, May 2011, Print Quality Posted here are publication materials related to the Department of Energy's Strategic Plan of 2011. DOE_2011-Strategic-Plan_High-Resolution_Print-Quality is a full-data, high-resolution version of the document. This will print/reproduce with the maximum resolution available from your output device (printer). This is a 15.7 Mb file. DOE_2011-Strategic-Plan_Medium-Resolution_Print-Quality is a medium-resolution version of the document. The images have been slightly downsampled and compressed so the file can be easier transmitted. This will print/reproduce at medium resolution on your output device (printer). This is a 3.6 Mb file.

148

E-print Network : User Login  

Office of Scientific and Technical Information (OSTI)

New Search | New Search | My Selections (0) | | | | Alerts | E-print Network Login The E-print Network ALERTS feature will automatically update you regarding newly available information in your specific area(s) of interest. Simply register for the service, then create a search strategy which will be run against information added to . Select a schedule (weekly, monthly, etc.) for receiving the email Alerts. If you are a new patron, Register to learn how to set up Alerts to meet your needs. If you are an existing patron, enter your user name and password in the boxes to login. Once logged in, you may review or modify your search, add a new search and see recent Alerts results. User Name: Password: Remember Me Remember me on this computer. Login Don't have a user name? Register!

149

Piezoelectric Drop-on-Demand Inkjet Printing of Rat Fibroblast Cells: Survivability Study and Pattern Printing  

E-Print Network (OSTI)

A novel piezoelectric, drop-on-demand (DOD) inkjet system has been developed and used to print L929 rat fibroblast cells. We investigate the survivability of the cells subjected to the large stresses during the printing process. These stresses are varied by changing the diameter of the orifice (36 to 119 microns) through which the cells are dispensed, as well as changing the electrical pulse used to drive the piezoelectric element. It is shown that for the smallest 36 microns diameter orifice, cell survival rates fall from 95% to approximately 76% when the ejection velocity is increased from 2 to 16 m/s. This decrease in survival rates is less significant when the larger orifice diameters of 81 microns and 119 microns are used. Analysis shows that there is a clear inverse relationship between cell survival rates and the mean shear rates during drop formation. By using the same printing set-up, fibroblast cells are printed onto alginate and collagen into patterns. Printed cells are cultured over a period of da...

Li, Er Qiang; Thoroddsen, Sigurdur Tryggvi

2013-01-01T23:59:59.000Z

150

Minutes from the November 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

November 17, 2010 November 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty seven individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide "Three-Year Plan" Dallas Woodruff, Headquarters opened the meeting by thanking everyone for providing their sites Three-Year Plan data to Headquarters in timely manner. Mr. Woodruff went on to say a number of individuals indentified a problem with the narrative section of the PPAFI Spreadsheets (unable to print the narratives). Mr. Woodruff notified the programmer of the narrative section printing glitch.

151

Minutes from the January 20, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

, 2010 , 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Update on the Department-wide Printing and Publishing Activities Report Three-Year Plan. Dallas Woodruff, Headquarters thanked the group for their contributions made to the Department-wide printing program during FY 2009. Mr Woodruff also thanked the group for providing data for the FY 2009 Three-Year Plan in a timely manner. The Three-Year Plan is in track for completion before the February

152

Minutes from the March 17, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 17, 2010 March 17, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-eight individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming Congressional Joint Committee on Printing Commercial Printing Report "JCP Form No. 2" Dallas Woodruff, Headquarters informed the group that sites should receive the call letter for the report on or around March 30, 2010. The report is due back to Headquarters by May 3, 2009. Mr. Woodruff reminded the group that they must report negative responses as well.

153

Press Pass - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

to the Fermilab press release mailing list. Press Releases Recent Releases Discovery of rare decay narrows space for new physics - 071913 Giant electromagnet to conclude its...

154

Power Electronics in the Printing and Publishing Industry  

Science Conference Proceedings (OSTI)

This report provides utility marketing and account executives and engineering staff with basic information about the use of power electronics systems and technologies in the printing and publishing industry. The report first describes the printing and publication industry. Then it outlines how power electronics may provide equipment designers with the power electronics topologies required to design and manufacturer future equipment used in the printing and publishing industry.

1999-12-16T23:59:59.000Z

155

Optical systems fabricated by printing-based assembly - Energy ...  

Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the ...

156

DOE fundamentals handbook: Engineering symbology, prints, and drawings  

Science Conference Proceedings (OSTI)

The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

Not Available

1993-01-01T23:59:59.000Z

157

DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 1  

Science Conference Proceedings (OSTI)

The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

Not Available

1993-01-01T23:59:59.000Z

158

DOE fundamentals handbook: Engineering symbology, prints, and drawings. Volume 2  

SciTech Connect

The Engineering Symbology, Prints, and Drawings Handbook was developed to assist nuclear facility operating contractors in providing operators, maintenance personnel, and technical staff with the necessary fundamentals training to ensure a basic understanding of engineering prints, their use, and their function. The handbook includes information on engineering fluid drawings and prints; piping and instrument drawings; major symbols and conventions; electronic diagrams and schematics; logic circuits and diagrams; and fabrication, construction, and architectural drawings. This information will provide personnel with a foundation for reading, interpreting, and using the engineering prints and drawings that are associated with various DOE nuclear facility operations and maintenance.

Not Available

1993-01-01T23:59:59.000Z

159

PRINT, WEB, AND e-NEWS ADVERTISING INSERTION ORDER  

Science Conference Proceedings (OSTI)

PRINT, WEB, AND e-NEWS. ADVERTISING INSERTION ORDER. FAX. Fax this form to: TMS Advertising Sales. Fax: (724) 814-3141. MAIL. Mail this form to:.

160

Dispenser Printed Zinc Microbattery with an Ionic Liquid Gel Electrolyte  

E-Print Network (OSTI)

the electrodes determine a battery’s capacity and power. Inthe printed battery’s discharge capacity increased more thanrates, the battery will exhibit reduced capacities due to

Ho, Christine Chihfan

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Aerosol Jet® Material Deposition for High Resolution Printed ...  

Science Conference Proceedings (OSTI)

Abstract Scope, Aerosol Jet printing, is finding wide use in a number of ... The Aerosol Jet systems deposit a wide variety of functional materials onto a wide ...

162

Physics form at arxiv.org e-Print archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Full text Help pages Go Automated e-print archives Computer Science Mathematics Physics Quantitative Biology Quantitative Finance Statistics Search Form Interface Catchup...

163

Internet Printing Protocol/1.1: Model and Semantics  

Science Conference Proceedings (OSTI)

This document is one of a set of documents, which together describe all aspects of a new Internet Printing Protocol (IPP). IPP is an application level protocol that can be used for distributed printing using Internet tools and technologies. This document ...

R. Herriot; R. deBry; S. Isaacson; P. Powell / T. Hastings

2000-09-01T23:59:59.000Z

164

Printed Circuit Board Maintenance, Repair, and Testing Guide  

Science Conference Proceedings (OSTI)

Printed circuit boards (PCBs) are an assembly of electronic and electro-mechanical components, such as relays and switches. The printed circuit (PC) board assembly provides multiple functions based on its application and intended service. It is an integral part of many instruments and/or instrumentation systems.

2003-10-30T23:59:59.000Z

165

Browse by Discipline -- E-print Network Subject Pathways: Plasma...  

Office of Scientific and Technical Information (OSTI)

E-print Network E-print Network Skip to main content Plasma Physics and Fusion Go to Research Groups Preprints Provided by Individual Scientists: A B C D E F G H I J K L M N O P Q...

166

Frequently Asked Questions (FAQ) for the E-print Network -- Energy,  

Office of Scientific and Technical Information (OSTI)

Frequently Asked Questions Frequently Asked Questions Table of Contents General Information What are e-prints? Are e-prints and preprints the same thing? What is the E-print Network: Research Communications for Scientists and Engineers? Who uses the E-print Network? How does the E-print Network help the user? How the E-print Network Works What's in the E-print Network? What are the criteria for inclusion in the E-print Network? How does the E-print Network function? What is E-print Network's search architecture? An overview of tools and services A note to site owners General Information Q: What are e-prints? A: E-prints are scholarly and professional works electronically produced and shared by researchers with the intent of communicating research findings to colleagues. They may include preprints, reprints,

167

Clean Cities: Clean Cities Print Products and Templates  

NLE Websites -- All DOE Office Websites (Extended Search)

Print Products and Templates Print Products and Templates Clean Cities has a wide variety of print products, marketing materials, and templates to support your coalition's education and outreach activities. See also logos, graphics, and photos. IdleBox The IdleBox toolkit contains outreach materials and templates to help with your idle-reduction projects. Print Publications Available print materials include the biannual newsletter-Clean Cities Now-and a variety of fact sheets and brochures about the Clean Cities initiative and the technologies in its portfolio. Browse Clean Cities-branded publications Find alternative fuels and advanced vehicle documents on the Alternative Fuels Data Center The Clean Cities Technical Response Service can also help you find the publications you need.

168

Minutes from the March 14, 2013 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

March 14, 2013 March 14, 2013 Mail discussion Al Majors is on leave today. Ellsworth Howell Jr. and Tony Nellums are sitting for Al. There are no agenda items for the Mail portion. A discussion period for questions, comments, or suggestions was opened without response Printing discussion Discussed suggestions for reducing printing expenses Presidential Executive Order 13589 and reducing hard copy printing in favor of electronic publishing Sec. 5. Printing. Agencies are encouraged to limit the publication and printing of hard copy documents and to presume that information should be provided in an electronic form, whenever practicable, permitted by law, and consistent with applicable records retention requirements. Agencies should consider using acquisition vehicles developed by the

169

Minutes from the September 15, 2010 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference September 15, 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-four individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors. Comments/Additions to last Months Minutes Dallas Woodruff, Headquarters opened the meeting by thanking everyone for participating in the today's teleconference. Printing Agenda Items... Upcoming FY 2010 Department-wide Three-Year Plan Dallas Woodruff, Headquarters informed the group that the programmer has been making modifications to the spreadsheets such as the narrative section, equipment installed year, sites data consolidation etc. The enhancement to the narrative section will allow sites to enter data into the four narrative sections, which allow

170

Minutes from the January 19, 2011 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

January 2010 January 2010 Printing and Mail Managers Exchange Forum Teleconference Twenty-one individuals participated in the Printing and Mail Managers Exchange Forum, which included Printing and Mail Managers and Contractors Comments/Additions to last Months Minutes No comments. Printing Agenda Items......... Update on the Department-wide FY-2010 Three-Year Plan Dallas Woodruff, Headquarters in formed the group that the Department-wide Printing and Publishing Activities is currently in the concurrence process. The report is due to congress by February 11, 2011. Mr. Woodruff thanks those that assisted in development of the report and he asked for recommendations on how to make the data submission more users friendly. Mr Woodruff also asked members to share any concern or problems they experienced regarding to using the Excel

171

Pennsylvania Company Develops Solar Cell Printing Technology | Department  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Pennsylvania Company Develops Solar Cell Printing Technology Pennsylvania Company Develops Solar Cell Printing Technology Pennsylvania Company Develops Solar Cell Printing Technology April 15, 2010 - 4:20pm Addthis Joshua DeLung What does this project do? The technology uses Plextronics' conductive inks that can be printed by manufacturers worldwide to make solar cells, potentially as easily as they might print a newspaper. This method is much less expensive than many others in terms of raw materials and manufacturing costs. Pittsburgh-based Plextronics, plans to commercialize low-cost solar power globally with its conductive ink technologies, a goal that has been helped by a government incubator program focused on finding marketable prototypes by 2012. "For any technology to be truly successful, you have to enable a new

172

Multi-Layer Inkjet Printed Contacts to Si  

DOE Green Energy (OSTI)

Ag, Cu, and Ni metallizations were inkjet printed with near vacuum deposition quality. The approach developed can be easily extended to other conductors such as Pt, Pd, Au, etc. Thick highly conducting lines of Ag and Cu demonstrating good adhesion to glass, Si, and printed circuit board (PCB) have been printed at 100-200 deg C in air and N2 respectively. Ag grids were inkjet-printed on Si solar cells and fired through the silicon nitride AR layer at 850 deg C, resulting in 8% cells. Next generation inks, including an ink that etches silicon nitride, have now been developed. Multi-layer inkjet printing of the etching ink followed by Ag ink produced contacts under milder conditions and gave solar cells with efficiencies as high as 12%.

Curtis, C. J.; van Hest, M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

2005-11-01T23:59:59.000Z

173

E-print Network : Your Selections  

Office of Scientific and Technical Information (OSTI)

Your Selections Back To Previous Page Selections - of First Page Previous Page Next Page Last Page Back To Previous Page You have 0 selections. Click the checkboxes clipping.addClipping on the results or alert results pages to add to your selections. Some links on this page may take you to non-federal websites. Their policies may differ from this site. U.S. Department of Energy U.S. Department of Energy Office of Science Office of Scientific and Technical Information Website Policies/Important Links Science Accelerator science.gov WorldWideScience.org Deep Web Technologies Email Results Use this form to email your search results * Email this to: * Your Name: Comments: URL only?: Number of results: 10 20 50 100 200 All Email Format: HTML TEXT * Required field Print Results

174

MHK Technologies/Oxygen Releasing and Carbon Absorbing Ocean Based  

Open Energy Info (EERE)

Releasing and Carbon Absorbing Ocean Based Releasing and Carbon Absorbing Ocean Based Renewable Energy System < MHK Technologies Jump to: navigation, search << Return to the MHK database homepage Oxygen Releasing and Carbon Absorbing Ocean Based Renewable Energy System.jpg Technology Profile Technology Description The benefits of the system developed and patented by AEEA are 1 exploitation of the greater wave energy density in the more remote off shore locations 2 usage of existing industrial fuel storage and distribution infrastructure 3 provision for a gradual transition to widespread electric vehicle use 4 avoidance of environmental destruction and visual impairment with minimal impact on commercial fishing and recreation uses 5 fostering the development of a new maritime and energy industry 6 avoidance of the high capital investment in mooring and anchoring seabed electrical cable installation and seabed restoration 7 development of flexibility by deployment of fleets of these vessels to supply widely separated market locations using coastal and national waterways and 8 provision for the addition of fleets without depletion of primary feed stocks as in nuclear energy systems 2 Fig 1 In summary the system converts wave energy from the nearly unlimited world wide

175

Minutes from the February 23, 2012 Printing and Mail Teleconference  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Printing and Mail Managers Exchange Forum Teleconference February 23, 2012 Participants: Headquarters (5) National Energy Technology Laboratory, PA National Security Complex Y-12 (2) Oak Ridge National Laboratory Y-12 Site Office (2) Hanford Site Office Oak Ridge Association University Oak Ridge Operations Office BWXT Pantex Site Office JanTec Corporation, Richland, Washington Los Alamos National Laboratory Chicago Office Bettis Atomic Power Laboratory National Security Technology C1, Las Vegas SLAC National Accelerator Laboratory Comments/Additions to minutes from last meeting. There were no comments. Printing Agenda Items......... Update on the Department-wide Printing and Publishing Activities Three-Year Plan (2013-2015).

176

Ink Jet Printing Approaches to Solar Cell Contacts  

DOE Green Energy (OSTI)

We are developing inkjet printing as a low cost, high through-put approach to the deposition of front contacts for Si solar cells. High deposition rates of 1m per printing pass were achieved with a new metalorganic ink composed of silver (trifluoroacetate) in ethylene glycol. The printing conditions were optimized to achieve a relatively high line resolution of 120 m. The optimal parameters for the piezoelectric inkjet were a pulse frequency of 50 Hz and pulse amplitude of 25 V. The best resolution and the line quality were achieved at a substrate temperature of 180 C and drop separation of 40 m.

Kaydanova, T.; Miedaner, A.; Curtis, C.; Perkins, J.; Alleman, J.; Ginley, D.

2003-05-01T23:59:59.000Z

177

WIPP News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Back to current year news releases 2008 News Releases November 21 WIPP Sets Schedule for Facility Upgrades October 23 New Mexico Environment Department Approves Permit Change for...

178

Press Pass - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

09 Press Release Archive Recent Releases Beams are Back in the Large Hadron Collider 112009 Fermilab seeks nominations for new Community Advisory Board to assist in future...

179

Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, Volume 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TS NOT MEASUREMENT SENSITIVE DOE-HDBK-3010-94 December 1994 Reaffirmed 2013 DOE HANDBOOK AIRBORNE RELEASE FRACTIONS/RATES AND RESPIRABLE FRACTIONS FOR NONREACTOR NUCLEAR FACILITIES Volume I - Analysis of Experimental Data U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650.

180

Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, Volume II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TS NOT MEASUREMENT SENSITIVE DOE-HDBK-3010-94 December 1994 Reaffirmed 2013 DOE HANDBOOK AIRBORNE RELEASE FRACTIONS/RATES AND RESPIRABLE FRACTIONS FOR NONREACTOR NUCLEAR FACILITIES Volume II - Appendices U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95004711 DOE-HDBK-3010-94

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Character Segmentation in Highly Blurred Ancient Printed Documents  

Science Conference Proceedings (OSTI)

Character segmentation, which is a fundamental preliminary step for character recognition, is particularly critic in the case of ancient printed documents, where several degradation processes may cause the characters to touch and merge one another. In ...

Anna Tonazzini; Luigi Bedini

1999-09-01T23:59:59.000Z

182

Browse by Discipline -- E-print Network Subject Pathways: Fission...  

Office of Scientific and Technical Information (OSTI)

Fission and Nuclear Technologies A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z Go to Research Collections E-prints Provided...

183

Dai Nippon Printing Co Ltd | Open Energy Information  

Open Energy Info (EERE)

Dai Nippon Printing Co Ltd Dai Nippon Printing Co Ltd Jump to: navigation, search Name Dai Nippon Printing Co Ltd Place Shinjuku-ku, Tokyo, Japan Zip 162-8001 Sector Solar Product Print conglomerate which is involved with manufacturing components for fuel cells and solar sectors. Coordinates 35.7015°, 139.709244° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":35.7015,"lon":139.709244,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

184

Web-Based Integration of Printed and Digital Information  

Science Conference Proceedings (OSTI)

The affordances of paper have ensured its retention as a key information medium, in spite of dramatic increases in the use of digital technologies for information storage, processing and delivery. Recent developments in paper, printing and wand technologies ...

Moira C. Norrie; Beat Signer

2003-01-01T23:59:59.000Z

185

Metallizations by Direct-Write Inkjet Printing: Preprint  

DOE Green Energy (OSTI)

Presented at the 2001 NCPV Program Review Meeting: Direct-write technologies offer the potential for low-cost, materials-efficient deposition of contact metallizations for PV. Direct-write technologies offer the potential for low-cost materials-efficient deposition of contact metallizations for photovoltaics. We report on the inkjet printing of metal organic decomposition (MOD) inks with and without nanoparticle additions. Near-bulk conductivity of printed and sprayed metal films has been achieved for Ag and Ag nanocomposites. Good adhesion and ohmic contacts with a measured contact resistance of 400 {mu}{Omega} {center_dot} cm{sup 2} have been observed between the sprayed silver films and a heavily doped n-type layer of Si. Inkjet printed films show adhesion differences as a function of the process temperature and solvent. Silver lines with good adhesion and conductivity have been printed on glass with 100 {micro}m resolution.

Curtis, C. J.; Rivkin, T.; Miedaner, A.; Alleman, J.; Perkins, J.; Smith, L.; Ginley, D.

2001-10-01T23:59:59.000Z

186

Browse by Discipline -- E-print Network Subject Pathways: Mathematics...  

Office of Scientific and Technical Information (OSTI)

Energy Storage, Conversion and Utilization A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z Go to Research Collections E-prints...

187

Tungsten carbide-cobalt by Three Dimensional Printing  

E-Print Network (OSTI)

Three Dimensional Printing is an additive manufacturing process for rapid prototyping ceramic and metallic parts [Sachs, et al, 1990]. Green (not sintered) tungsten carbide-cobalt parts must have a density greater than 50% ...

Kelley, Andrew, III

1998-01-01T23:59:59.000Z

188

Direct printing of lead zirconate titanate thin films  

E-Print Network (OSTI)

Thus far, use of lead zirconate titanate (PZT) in MEMS has been limited due to the lack of process compatibility with existing MEMS manufacturing techniques. Direct printing of thin films eliminates the need for photolithographic ...

Bathurst, Stephen, 1980-

2008-01-01T23:59:59.000Z

189

Browse by Discipline -- E-print Network Subject Pathways: Renewable...  

Office of Scientific and Technical Information (OSTI)

Fission and Nuclear Technologies A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z Go to Research Collections E-prints Provided...

190

Browse by Discipline -- E-print Network Subject Pathways: Plasma...  

Office of Scientific and Technical Information (OSTI)

Plasma Physics and Fusion A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z Go to Research Collections E-prints Provided by...

191

SRNL - News Release Archives  

SRNL Atmospheric Technologies’ Expertise Helps Guide Response to Graniteville Emergency; 2004 News Releases;

192

This material is declared a work of the U.S. Government and is not subject to copyright protection in the United States. Approved for public release; distribution is unlimited.  

E-Print Network (OSTI)

large quantities of air without any moving parts, which when mixed with fuel can provide the necessary ejector entry. bypass ratio (Eq. 1) ratio of specific heats Superscripts & Subscripts * choked nozzle ejector condition t total INTRODUCTION An ejector, also known as a jet pump, is a pumping device

Williams, John D.

193

RMOTC - News - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Releases Press Releases January Sale of Equipment and Materials Janurary 2014 | Press Releases Read Press Release here. Department of Energy to Sell NPR-3 July 2013 | Press Releases Read Press Release here. View Secretary of Energy Ernest Moniz's Report to Congress here. Press Releases Archive STWA, Inc. to determine the performance of its Applied Oil Technology (AOT(tm)) in reducing crude oil's viscosity to lower transportation costs (PDF) June 2011 | Press Releases Geothermal research initiative at RMOTC (PDF) October 2009 | Press Releases RMOTC partner receives award for tech tested at Teapot Dome (PDF) August 2009 | Press Releases Summer interns work with RMOTC engineers August 2009 | Articles | Casper Journal College, business, government officials launch wind project

194

CY10 ASER TTR_cover final.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

1-5616P 1-5616P Unlimited Release Printed September 2011 Annual Site Environmental Report for Tonopah Test Range, Nevada and Kauai Test Facility, Hawaii Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. 2010 2010 SAND2011-5616P Unlimited Release Printed September 2011 Calendar Year 2010 Annual Site Environmental Report Tonopah Test Range, Nevada & Kauai Test Facility, Hawaii PRODUCED BY: Sandia National Laboratories P.O. Box 5800

195

CY09 SNL Cover.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

49P 49P Unlimited Release Printed September 2010 Calendar Year 2009 Annual Site Environmental Report for Sandia National Laboratories, New Mexico Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. SAND2010-5349P Unlimited Release Printed September 2010 Calendar Year 2009 Annual Site Environmental Report Sandia National Laboratories, Albuquerque, New Mexico PRODUCED BY: Sandia National Laboratories P.O. Box 5800 Albuquerque, New Mexico 87185-1042

196

CY11 ASER TTR_cover final.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

2-7341P 2-7341P Unlimited Release Printed September 2012 Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U. S. Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Annual Site Annual Site Environmental Environmental Report for Tonopah Test Report for Tonopah Test Range, Nevada and Kauai Range, Nevada and Kauai Test Facility, Hawaii Test Facility, Hawaii 2011 2011 SAND2012-7341P Unlimited Release Printed September 2012 Calendar Year 2011 Annual Site Environmental Report for Tonopah Test Range, Nevada & Kauai Test Facility, Hawaii

197

Protocols for implementing DOE authorized release of radioactive scrap metals  

SciTech Connect

A process to implement the US Department of Energy`s (DOE) policy for authorized release of radioactive materials from DOE facilities is provided in the Draft Handbook for Controlling Release for Reuse or Recycle of Property Containing Residual Radioactive Material, published by DOE in 1997 and distributed to DOE field offices for interim use and implementation. The authorized release of such property is intended to permit its beneficial use across the entire DOE complex. A computerized management tool--P2Pro(RSM)--has been developed to aid in carrying out the release process for radioactive metals. It contains protocols for the authorized release process and relevant information to facilitate the evaluation of scrap metals for reuse and recycle. The P2Pro(RSM) protocols provide DOE and its contractors with an effective, user-friendly tool for managing authorized release activities P2Pro(RSM) is designed to be used in the Windows{sup {trademark}} environment. The protocols incorporate a relational database coupled with a graphic-user interface to guide the user through the appropriate steps so authorized release limits can be developed. With the information provided in the database, an as-low-as-reasonably-achievable (ALARA) optimization process can be easily set up and run for up to 10 alternatives for disposition of radioactive scrap metals. The results of the ALARA optimization process can be printed in a series of reports and submitted as part of the application for the authorized release of the radioactive scrap metals.

Chen, S.Y.; Arnish, J.; Kamboj, S.; Nieves, L.A. [Argonne National Lab., IL (United States). Environmental Assessment Div.

1999-11-01T23:59:59.000Z

198

SRS - News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

6/2014 6/2014 SEARCH GO spacer News Releases govDELIVERY Video Releases Fact Sheets Photo Gallery Speakers Media Contacts SRS Home SRS News Releases News releases are in PDF format (requires Acrobat Reader - click here to download). * 2013 News Releases * 2012 News Releases * 2011 News Releases * 2010 News Releases 2013: 12.31.13 Dr. Sam Fink Earns Donald Orth Lifetime Achievement Award 12.31.13 Savannah River Remediation Issues Fiscal Year 2013 Annual Report 12.18.13 Prototype System Brings Advantages of Wireless Technology to Secure Environment 12.16.13 Registration for the 2014 SRS Public Tour Program Begins December 30 12.12.13 Area Children to Benefit from SRS "Toys for Tots" Campaign 12.10.13 Ruth Patrick's Work Opens Doors for SRNL Environmental Remediation

199

NACP Data Sets Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Set Released The ORNL DAAC is pleased to announce the release of a Global Soil data set : A Global Database of Gas Fluxes from Soils after Rewetting or Thawing, Version 1.0 . Data...

200

SR 2002 News Release  

NLE Websites -- All DOE Office Websites (Extended Search)

2 News Releases SRS Environmental Management FY2003 Budget and Top-To-Bottom Review Presented at Friday Meeting - SR-02-01 NNSA Releases Accident Investigation Report On TEF...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Dietary guidelines report released  

Science Conference Proceedings (OSTI)

The Report of the Dietary Guidelines Advisory Committee on the Dietary Guidelines for Americans 2010 was released in June by the US Departments of Agriculture and Health and Human Services. Dietary guidelines report released Health Nutrition Tran

202

SAND2006-4506 P  

NLE Websites -- All DOE Office Websites (Extended Search)

506P 506P Unlimited Release Printed September 2006 Calendar Year 2005 Annual Site Environmental Report for Sandia National Laboratories, New Mexico Katrina Wagner, Susan Koss, Stephanie Salinas and Teresa Goering Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's

203

3D printing rises to the occasion | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Features Features 2014 2013 2012 2011 2010 News Home | ORNL | News | Features | 2013 SHARE 3D printing rises to the occasion ORNL group shows how it's done, one layer at a time A perforated metal box produced by an Arcam 3D printer. This detailed A perforated metal box produced by an Arcam 3D printer. This detailed "calibration" part illustrates some of the versatility of 3D printing. Photo: Jason Richards (hi-res image) Things have come a long way since the mid-1980s when 3D Systems cofounder Chuck Hull worked out the technology to print objects in three dimensions, one very thin layer at a time. Hull called his new technology "stereolithography." In it, a guided beam of ultraviolet light is focused on a vat of liquid polymer, solidifying areas where it hits. When one layer is complete, the

204

Optical systems fabricated by printing-based assembly  

DOE Patents (OSTI)

Provided are optical devices and systems fabricated, at least in part, via printing-based assembly and integration of device components. In specific embodiments the present invention provides light emitting systems, light collecting systems, light sensing systems and photovoltaic systems comprising printable semiconductor elements, including large area, high performance macroelectronic devices. Optical systems of the present invention comprise semiconductor elements assembled, organized and/or integrated with other device components via printing techniques that exhibit performance characteristics and functionality comparable to single crystalline semiconductor based devices fabricated using conventional high temperature processing methods. Optical systems of the present invention have device geometries and configurations, such as form factors, component densities, and component positions, accessed by printing that provide a range of useful device functionalities. Optical systems of the present invention include devices and device arrays exhibiting a range of useful physical and mechanical properties including flexibility, shapeability, conformability and stretchablity.

Rogers, John (Champaign, IL); Nuzzo, Ralph (Champaign, IL); Meitl, Matthew (Durham, NC); Menard, Etienne (Durham, NC); Baca, Alfred J. (Urbana, IL); Motala, Michael (Champaign, IL); Ahn, Jong-Hyun (Suwon, KR); Park, Sang-II (Savoy, IL); Yu; Chang-Jae (Urbana, IL); Ko, Heung-Cho (Gwangju, KR); Stoykovich; Mark (Dover, NH); Yoon, Jongseung (Urbana, IL)

2011-07-05T23:59:59.000Z

205

Toward integrated PV panels and power electronics using printing technologies  

SciTech Connect

In this paper, we review the latest developments in the area of printing technologies with an emphasis on the fabrication of control-embedded photovoltaics (PV) with on-board active and passive devices. We also review the use of power converters and maximum power point tracking (MPPT) circuits with PV panels. Our focus is on the investigation of the simplest implementations of such circuits in view of their integration with solar cells using printing technologies. We see this concept as potentially enabling toward further cost reduction. Besides a discussion as to feasibility, we shall also present some projections and guidelines toward possible integration. (author)

Ababei, Cristinel; Yuvarajan, Subbaraya [Electrical and Computer Engineering Department, North Dakota State University, Fargo, ND 58108 (United States); Schulz, Douglas L. [Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States)

2010-07-15T23:59:59.000Z

206

Release strategies for making transferable semiconductor structures, devices and device components  

DOE Patents (OSTI)

Provided are methods for making a device or device component by providing a multilayer structure having a plurality of functional layers and a plurality of release layers and releasing the functional layers from the multilayer structure by separating one or more of the release layers to generate a plurality of transferable structures. The transferable structures are printed onto a device substrate or device component supported by a device substrate. The methods and systems provide means for making high-quality and low-cost photovoltaic devices, transferable semiconductor structures, (opto-)electronic devices and device components.

Rogers, John A. (Champaign, IL); Nuzzo, Ralph G. (Champaign, IL); Meitl, Matthew (Raleigh, NC); Ko, Heung Cho (Urbana, IL); Yoon, Jongseung (Urbana, IL); Menard, Etienne (Durham, NC); Baca, Alfred J. (Urbana, IL)

2011-04-26T23:59:59.000Z

207

Preliminary Release: August 19, 2011",,,,,,,,,,,,,"Released: April 2013","Releas  

U.S. Energy Information Administration (EIA) Indexed Site

,,,,,,,,,,,,,"Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013","Released: April 2013"

208

AEO2008 Overview - Early Release  

Annual Energy Outlook 2012 (EIA)

Report :DOEEIA-0383(2008) Released Date: December 2007 Next Release Date: December 2008 (full report available early 2008) Annual Energy Outlook 2008 (Early Release)...

209

DOE-HDBK-3010-94; Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, Volume II  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3010-94 3010-94 December 1994 DOE HANDBOOK AIRBORNE RELEASE FRACTIONS/RATES AND RESPIRABLE FRACTIONS FOR NONREACTOR NUCLEAR FACILITIES Volume II - Appendices U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from the Office of Scientific and Technical Information, P.O. Box 62, Oak Ridge, TN 37831; (615) 576-8401. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. Order No. DE95004711 DOE-HDBK-3010-94 Page i VOLUME II: APPENDICES APPENDIX A

210

Print-and-Peel Fabrication for Microfluidics: What’s in it for Biomedical Applications?  

E-Print Network (OSTI)

Solid-object printers have the capability for 3D printing,single-step 3D molding without a solid-object printer. 33,763D) printing of masters using a solid-object printer.

Thomas, Marlon S.; Millare, Brent; Clift, Joseph M.; Bao, Duoduo; Hong, Connie; Vullev, Valentine I.

2010-01-01T23:59:59.000Z

211

Evaporative printing of organic materials and metals and development of organic memories  

E-Print Network (OSTI)

The advantages of directed printing make it the ideal fabrication tool for the ubiquitous electronic technologies of the future. However, direct printing techniques such as ink-jet technology, are currently limited to ...

Kang, Sung Hoon, 1974-

2004-01-01T23:59:59.000Z

212

ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11 Feb 2010 printed) ENG-Canada-USA Government Procurement (clean 11...

213

Leaching Studies for Metals Recovery from Waste Printed Wiring ...  

Science Conference Proceedings (OSTI)

Presentation Title, Leaching Studies for Metals Recovery from Waste Printed Wiring ... of the Chemical Changes and Surface Properties of Carbonated Waste Cement ... Flux for Basic Oxygen Steel Making Using Waste Oxides of Steel Plant ... Heat Treatment of Black Dross for the Production of a Value Added Material - A

214

DOE-HDBK-3010-94; DOE Handbook Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, Volume 1  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10-94 10-94 December 1994 CHANGE NOTICE NO. 1 March 2000 DOE HANDBOOK AIRBORNE RELEASE FRACTIONS/RATES AND RESPIRABLE FRACTIONS FOR NONREACTOR NUCLEAR FACILITIES Volume I - Analysis of Experimental Data U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Change Notice No. 1 DOE-HDBK-3010-94 March 2000 Airborne Release Fractions/Rates and Respirable Fractions

215

SUBJECT: Effective Date: Policy Number: Printing Services 4-18-07 3-302  

E-Print Network (OSTI)

for quotation and execution. DEFINITIONS: Printing services: the process of printing ink or toner on paper for any black and white and full color printing of letterhead, envelopes, brochures, newsletters, memo-come, first-served basis. Exceptions can be made for priority requests, but a rush charge may be added

Glebov, Leon

216

ORISE: Current News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases News Releases Official announcements released by the Oak Ridge Institute for Science and Education (ORISE) are listed below. News releases are sortable by date, headline or topic. For news releases from previous years, please visit our News Archives. Recent News Releases Date Title 07/15/2013 College of American Pathologists renews accreditation of beryllium laboratory managed by ORAU 06/12/2013 Top graduate students from U.S. convene with Nobel Laureates in Lindau, Germany 12/03/2012 DOE recognizes partnership with ORAU for long-time management of Tennessee Science Bowl 09/10/2012 Evasius selected as ORAU's vice president and director of science education programs 03/12/1012 ORAU Receives Another Safety Site Star of Excellence 01/18/2012 Study finds foreign doctorate recipients' stay rates remain high

217

Potential Release Sites  

NLE Websites -- All DOE Office Websites (Extended Search)

PRS PRS Potential Release Sites Legacy sites where hazardous materials are found to be above acceptable levels are collectively called potential release sites. Contact Environmental Communication & Public Involvement P.O. Box 1663 MS M996 Los Alamos, NM 87545 (505) 667-0216 Email Less than 10 percent of the total number of potential release sites need to go through the full corrective action process. What are potential release sites? Potential release sites are areas around the Laboratory and the town of Los Alamos at which hazardous materials from past activities have been found. Some examples of potential release sites include septic tanks and associated drain lines chemical storage areas wastewater outfalls material disposal areas incinerators sumps firing ranges

218

NREL: News - News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases Releases NREL's Public Relations Office works with media outlets on news stories about the laboratory and renewable energy and energy efficiency technologies. You may subscribe to receive new NREL releases by email or via RSS feed. NREL News Releases RSS Feed (XML) Search All News Releases Search Help 2014 News Releases January 6, 2014 NREL Expert Honored for Energy Systems Innovations The Energy Department's National Renewable Energy Laboratory (NREL) recently won several prestigious awards, including honors for innovations in window air-conditioning efficiency, data sharing, and its energy-efficient computer data center. January 2, 2014 NREL Finds a New Cellulose Digestion Mechanism by a Fast-eating Enzyme Researchers at the Energy Department's National Renewable Energy

219

NETL 2007 News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

7 News Releases 7 News Releases News Releases issued in: 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 December 18, 2007 Energy Department Awards $66.7 Million for Large-Scale Carbon Sequestration Project DOE awarded $66.7 million to the Midwest Geological Sequestration Consortium for the Department's fourth large scale carbon sequestration project. December 06, 2007 DOE Estimates Future Water Needs for Thermoelectric Power Plants The Office of Fossil Energy's National Energy Technology Laboratory has released a 2007 update to its groundbreaking study, "Estimating Freshwater Needs to Meet Future Thermoelectric Generation Requirements." December 05, 2007 Tax Credit Program Promotes Advanced Coal Power Generation and Gasification Technologies

220

NACP Data Sets Released  

NLE Websites -- All DOE Office Websites (Extended Search)

is pleased to announce the release of a data set associated with The North American Carbon Program (NACP): NACP North American Forest Dynamics Project: Forest Disturbance and...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

WIPP News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

10 News Releases December 1 State Renews WIPP Facility Permit November 18 National TRU Program Director Selected November 18 Waste Isolation Pilot Plant Receives Second EPA...

222

WIPP News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

3 News Releases September 20 WIPP Management and Operating Contractor Recognized for Continuous Safety Performance Click on photo below for larger image. September 18 WIPP Receives...

223

NETL News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

deep underground. October 27, 2010 Study Examines Benefits of Expanding North Dakota Oil Refinery Capacity - A recent press release through Senator Byron Dorgan's (D-N.D.)...

224

Berkeley Lab News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Stronger Now Scientists Know Why (1208) 2007 News Releases First Look at an Enzyme Target for Antibacterial and Cancer Drugs (121907) Helium Isotopes Point to New Sources...

225

Microsoft Word - NSTB_AMI_SecurityConsiderationsV4.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANDIA REPORT SAND2007-7327 Unlimited Release Printed November 2007 Advanced Metering Infrastructure Security Considerations Raymond C. Parks Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Advanced Metering Infrastructure Security Considerations 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of

226

Microsoft Word - Front Matter thru Exec Summary_MR Drft_with no disclaimer.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Calendar Year 2010 Calendar Year 2010 Unlimited Release SAND2011-5781P Printed September 2011 Annual Groundwater Monitoring Report Prepared by Sandia National Laboratories, Albuquerque, New Mexico Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited Annual Groundwater Monitoring Report Calendar Year 2010 Groundwater Protection Program Sandia National Laboratories, New Mexico September 2011 Prepared by: Long Term Stewardship Department (4142) and Environmental Programs (4143)

227

Multi-Layer Inkjet Printed Contacts for Si Solar Cells (Poster)  

DOE Green Energy (OSTI)

The objective of this report is to develop inkjet printing (including tools, inks, and processing conditions) for high-quality Ag contacts for Si solar cells. The conclusions are: (1) Tools and inks for the atmospheric inkjet printing of Ag metallization for Si solar cells have been developed. (2) Line widths, conductivities and thicknesses comparable to, or better than, those produced by screen printing. (3) A new fire-through ink and layered printing were found to decrease the processing temperature for contact formation to as low as 650 C and improve printed cell performance.

Curtis, C. J.; van hest, M. F. A. M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

2006-05-01T23:59:59.000Z

228

Transcript: OSTI's E-print Network Now Boasts Close to 1 Million Documents,  

Office of Scientific and Technical Information (OSTI)

Transcript: OSTI's E-print Network Now Boasts Close to 1 Million Documents, Transcript: OSTI's E-print Network Now Boasts Close to 1 Million Documents, Office of Scientific and Technical Information, U.S. Department of Energy, www.osti.gov March 2007 E-Print Network Listen Now Where can you find full-text access to approximately 1 million scientific e-print documents? Where can you gain entry to more than 22,000 scientific Web sites organized by discipline, and link to more than 2,900 relevant scientific societies? Visit the E-print Network. The E-print Network is rapidly approaching 1 million documents. The scientific and technical information for this vast, integrated communications hub was created by scientists and research engineers active in their respective fields. E-print Network is intended for use by other scientists, engineers, and students at advanced levels.

229

News Releases | Biosciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases News Releases BIO Home Page About BIO News Releases Research Publications People Contact Us Organization Chart Site Index Inside BIO BIO Safety About Argonne Biosciences Division News Releases Protein crystal samples are placed on a small metal tip so X-rays from the adjacent beam pipe can pass through them and diffract off the atoms inside the crystal. Lessening X-ray damage is healthy for protein discovery data too December 16, 2013 - New recommendations for using X-rays promise to speed investigations aimed at understanding the structure and function of biologically important proteins - information critical to the development of new drugs. Read more. Kayakers and boats traverse the branch of the Chicago River in the downtown area Argonne partners with Metropolitan Water Reclamation District to study Chicago River microbe population

230

WIPP News Releases - 2005  

NLE Websites -- All DOE Office Websites (Extended Search)

5 News Releases December 27 Empty WIPP truck overturns December 12 Dr. Dave Moody to Lead the Carlsbad Field Office December 7 WIPP Satellite Tracking System Relocates to Carlsbad...

231

WIPP News Releases - 2006  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases December 12 Idaho National Laboratory Waste Stream Cleared for Shipment to WIPP November 15 WIPP Reaches 4-Million-Hour Safety Milestone October 16 State of New Mexico...

232

WIPP News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

released by SRS at the same time The three shipments consisted of (left to right) a TRUPACT-III, a RH-72B and one with TRUPACT-IIs, -- marking another first for WIPP. Since...

233

2007 SR News Release  

NLE Websites -- All DOE Office Websites (Extended Search)

7 News Releases DOE Seeks Public Input on Scope of Environmental Review for the Global Nuclear Energy Partnership SR-07-01 DOE Issues Draft Request for Proposal for SRS Liquid...

234

SR 2005 News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases End State Vision at Savannah River Site Made Public SR-05-01 Note To Editors On MOX Ceremony SR-05-03 NNSA Breaks Ground On MOX Facility SR-05-04 Subcontract Awarded for...

235

Recycling of WEEE: Characterization of spent printed circuit boards from mobile phones and computers  

SciTech Connect

Highlights: > This paper presents new and important data on characterization of wastes of electric and electronic equipments. > Copper concentration is increasing in mobile phones and remaining constant in personal computers. > Printed circuit boards from mobile phones and computers would not be mixed prior treatment. - Abstract: This paper presents a comparison between printed circuit boards from computers and mobile phones. Since printed circuits boards are becoming more complex and smaller, the amount of materials is constantly changing. The main objective of this work was to characterize spent printed circuit boards from computers and mobile phones applying mineral processing technique to separate the metal, ceramic, and polymer fractions. The processing was performed by comminution in a hammer mill, followed by particle size analysis, and by magnetic and electrostatic separation. Aqua regia leaching, loss-on-ignition and chemical analysis (inductively coupled plasma atomic emission spectroscopy - ICP-OES) were carried out to determine the composition of printed circuit boards and the metal rich fraction. The composition of the studied mobile phones printed circuit boards (PCB-MP) was 63 wt.% metals; 24 wt.% ceramics and 13 wt.% polymers; and of the printed circuit boards from studied personal computers (PCB-PC) was 45 wt.% metals; 27 wt.% polymers and ceramics 28 wt.% ceramics. The chemical analysis showed that copper concentration in printed circuit boards from personal computers was 20 wt.% and in printed circuit boards from mobile phones was 34.5 wt.%. According to the characteristics of each type of printed circuit board, the recovery of precious metals may be the main goal of the recycling process of printed circuit boards from personal computers and the recovery of copper should be the main goal of the recycling process of printed circuit boards from mobile phones. Hence, these printed circuit boards would not be mixed prior treatment. The results of this paper show that copper concentration is increasing in mobile phones and remaining constant in personal computers.

Yamane, Luciana Harue, E-mail: lucianayamane@uol.com.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Tavares de Moraes, Viviane, E-mail: tavares.vivi@gmail.com [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Crocce Romano Espinosa, Denise, E-mail: espinosa@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil); Soares Tenorio, Jorge Alberto, E-mail: jtenorio@usp.br [Department of Metallurgical and Materials Engineering, University of Sao Paulo, Av. Prof. Mello Moraes, 2463 Sao Paulo, SP 05508-030 (Brazil)

2011-12-15T23:59:59.000Z

236

Release Date: August 2010 Next Release Date: August 2011  

U.S. Energy Information Administration (EIA)

Release Date: August 2010 Next Release Date: August 2011 U.S. Energy Information Administration/Renewable Energy Annual 2008 Table 1.14 Total Biomass Electricity Net ...

237

AEO2014 Early Release Overview  

U.S. Energy Information Administration (EIA)

U.S. Energy Information Administration Annual Energy Outlook 2014 Early Release Overview 3 AEO2014 Early Release Overview decade for the first time ...

238

V-148: Novell iPrint Client Unspecified Buffer Overflow Vulnerability |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8: Novell iPrint Client Unspecified Buffer Overflow 8: Novell iPrint Client Unspecified Buffer Overflow Vulnerability V-148: Novell iPrint Client Unspecified Buffer Overflow Vulnerability May 3, 2013 - 6:00am Addthis PROBLEM: Novell iPrint Client Unspecified Buffer Overflow Vulnerability PLATFORM: Novell iPrint Client 5.x ABSTRACT: A vulnerability has been reported in Novell iPrint Client, which can be exploited by malicious people to compromise a user's system REFERENCE LINKS: Secunia Advisory SA53261 Novell KB 7012344 Novell KB 7008708 CVE-2013-1091 IMPACT ASSESSMENT: High DISCUSSION: The vulnerability is caused due to an unspecified error and can be exploited to cause a stack-based buffer overflow. IMPACT: Successful exploitation may allow execution of arbitrary code SOLUTION: Vendor recommendation is to update to Version 5.90

239

Non-Contact Printed Aluminum Metallization of Si Photovoltaic Devices: Preprint  

DOE Green Energy (OSTI)

Alternative solution-based techniques such as aerosol jet printing offer the dual benefits of contactless pattern deposition and high material utilization. We have used aerosol jet printing to investigate non-contact printed Al metal ink as a replacement for screen printed Al back contacts on wafer Si solar cells. This particle-based ink can be prepared at high loadings of 60 weight % metal, which enables rapid deposition of 1 - 10 um thick lines. Al lines printed on Si wafers and heated between 550 and 800 degrees C form low resistance contacts suitable for current extraction. The effectiveness of these printed Al back contacts has further been demonstrated by incorporating them into a series of 21 cm2 crystalline Si solar cells that produced a champion power conversion efficiency of 13%.

Platt, H. A. S.; van Hest, M. F. A. M.; Li, Y.; Novak, J. P.

2012-06-01T23:59:59.000Z

240

http://www.energy.gov/news/archives/print/5471.htm  

National Nuclear Security Administration (NNSA)

Megan Barnett, (202) 586-4940 For Immediate Release September 5, 2007 Department of Energy Announces Decision to Consolidate Surplus Plutonium in South Carolina WASHINGTON, DC -...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

2010 Report Released | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Our History > NNSA Timeline > 2010 Report Released 2010 Report Released January 12, 1987 Washington, DC 2010 Report Released White House releases "2010 Report," projecting...

242

Press Pass - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Press Release Archive 4 Press Release Archive Recent Releases Fermilab and Berkeley Lab Collaborate with Meyer Tool on Key Component for European Particle Accelerator 12/16/04 NIU launches Institute for Neutron Therapy at Fermilab 12/6/04 Pier Oddone of Berkeley Lab Named Fermilab Director 11/19/04 Fermilab To Host Girl Scout Badge Event on Saturday, November 6 11/4/04 Rocky Kolb to Direct New Fermilab Particle Astrophysics Center 11/1/04 Fermilab Director Witherell One of Eight Directors to Receive Energy Secretary's Gold Award 10/25/04 Fermilab Arts Series Celebrates 30th Anniversary 10/7/04 Fermilab Offers Tours of Antimatter Production Site, October 3 and 24 9/14/04 Fermilab Scientists Present New Physics Results at ICHEP Beijing 8/18/04 How They Spent Their Summer Vacation: QuarkNet Students Experience Real Work of Fermilab Scientists 8/3/04

243

NETL 2008 News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

8 News Releases 8 News Releases News Releases issued in: 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 December 23, 2008 Fossil Energy Research Grants Awarded to Four Minority Universities Continuing its long-standing minority university research program, DOE has selected four institutions where students and faculty will investigate projects dealing with sensors and controls, computational energy sciences, and advanced materials for use in fossil fuel power systems. December 19, 2008 NETLÂ’s Multiphase Flow Research Group Wins INCITE Award The Multiphase Flow Research Group at the National Energy Technology Laboratory (NETL) has won a 2009 Innovative and Novel Computational Impact on Theory and Experiment (INCITE) award from the U.S. Department of Energy for their proposal "Clean and Efficient Coal Gasifier Designs using Large-Scale Simulations."

244

SR 2000 News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

0 News Releases 0 News Releases Nuclear Security Oversight Panel Visits SRS As Part of NNSA Tour - SR-00-01 DOE Security Czar To Visit SRS - SR-00-02 DOE To Present SRS Fiscal Year 2001 Budget - SR-00-03 DOE Releases Accident Investigation Report On FB-Line Workers' Plutonium Intake - SR-00-04 Environmental Management Science Program National Workshop - SR-00-05 DOE Cleanup Science on Display In Atlanta - SR-00-06 Environmental Cleanup Technology Conference Held - SR-00-07 Wackenhut Receives Award Fee - SR-00-08 WSRC Receives Award Fee - SR-00-09 DOE Hosts Radioactive Materials Transportation Workshop - SR-00-10 Energy Secretary To Visit SRS - SR-00-11 "Melt & Dilute" Selected To Treat DOE's Spent Nuclear Fuel At SRS - SR-00-12 Savannah River Operations Office Wins Best Practices Award - SR-00-13

245

NETL 2003 Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

3 Releases 3 Releases News Releases issued in: 2011 | 2010 | 2009 | 2008 | 2007 | 2006 | 2005 | 2004 | 2003 | 2002 | 2001 | 2000 December 30, 2003 Advanced Natural Gas Turbine Hailed as Top Power Project of 2003 A power plant featuring a next-generation gas turbine developed as part of DOE's advanced turbine systems program has been selected by Power Engineering magazine as one of three 2003 Projects of the Year. December 8, 2003 Historically Black, Other Minority Colleges Encouraged to Compete for Grants for Fossil Energy Research DOE has issued its annual call for fossil fuel research proposals from historically black and other minority colleges and universities. December 5, 2003 Massachusetts Institute of Technology Professor is 2003 Lowry Award Winner The Energy Department's 2003 Homer H. Lowry Award will go to a Massachusetts Institute of Technology professor emeritus whose combustion research continues to influence the design and commercialization of cleaner, 'low NOx' combustors widely used in the power industry.

246

Feature - WATER Tool Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Assessment for Transportation Energy Resources (WATER) Tool Released Water Assessment for Transportation Energy Resources (WATER) Tool Released Argonne National Laboratory recently released an open access online tool called WATER (Water Assessment for Transportation Energy Resources), which quantifies water footprint of fuel production stages from feedstock production to conversion process for biofuel with county, state, and regional level spatial resolution. WATER provides analysis on water consumption and its impact on water quality. It contains biofuel pathways for corn grain ethanol, soybean biodiesel, and cellulosic ethanol produced from corn stover and wheat straw. Perennial grass (Switchgrass and Miscanthus) and forest wood residue-based biofuel pathways are currently under development. The WATER tool enables users to conduct pathway comparison, scenario development, and regional specific feedstock analysis in supporting of biofuel industry development and planning. It is available at http://water.es.anl.gov/.

247

News Releases - 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases - 2013 News Releases - 2013 /newsroom/_assets/images/newsroom-icon.jpg News Releases - 2013 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. los alamos acheivements Dateline Los Alamos: Top Science News for 2013 HIV vaccine, Mars water, climate change, birth of a black hole, thwarting terrorists among topics of interest Los Alamos outstanding science and technology achievements for 2013 - 12/24/13 2014 Employee Giving Campaign Nearly $2 million pledged during Los Alamos National Laboratory's 2014 employee giving campaign Lab employee contributions will fund a wide range of programs offered by eligible nonprofit organizations. - 12/17/13 Bradbury Science Museum

248

Get scientific E-prints | OSTI, US Dept of Energy, Office of...  

Office of Scientific and Technical Information (OSTI)

Energy Science and Technology Software Center E-print Network Information Bridge LEDP National Library of Energy OSTIblog Science.gov Science Accelerator Science Conference...

249

Exploring the emerging design territory of construction 3D printing – project led architectural research.  

E-Print Network (OSTI)

??3D printing techniques (also known as additive fabrication) are maturing and increasingly being used as an alternative means for niche product manufacturing. These fabrication techniques… (more)

Gardiner, J

2011-01-01T23:59:59.000Z

250

E-print Network Web Log News: Research Communications for Scientists...  

Office of Scientific and Technical Information (OSTI)

Description This Web Log provides the latest information about changes to E-print Network - its content, features, and functionality - as well as news or information of interest...

251

Procedures for preparation, printing, and distribution of UMTRA Project National Environmental Policy Act documents  

SciTech Connect

This paper discusses the procedures for preparation, printing and distribution of Uranium Mill Tailings Remedial Action (UMTRA) Project National Environmental Policy Act documents. (KJD)

Not Available

1988-08-01T23:59:59.000Z

252

EM Press Releases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

press-releases Office of Environmental Management 1000 press-releases Office of Environmental Management 1000 Independence Ave., SW Washington, DC 20585 202-586-7709 en Task Order Awarded to Small Business for Natural Gas Services http://energy.gov/em/articles/task-order-awarded-small-business-natural-gas-services Task Order Awarded to Small Business for Natural Gas Services

253

SEPA Press Releases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

sepa/press-releases Southeastern Power Administration sepa/press-releases Southeastern Power Administration 1166 Athens Tech Rd. Elberton, GA 30635-6711Phone: (706) 213-3800 en ENERGY EFFICIENCY AND RENEWABLE ENERGY REPORT - FY 2013 http://energy.gov/sepa/articles/energy-efficiency-and-renewable-energy-report-fy-2013 ENERGY EFFICIENCY AND RENEWABLE ENERGY REPORT - FY 2013

254

NE Press Releases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

press-releases 1000 Independence Ave. SWWashington DC press-releases 1000 Independence Ave. SWWashington DC 20585202-586-5000 en Energy Department Announces New Investment in Innovative Small Modular Reactor http://energy.gov/articles/energy-department-announces-new-investment-innovative-small-modular-reactor Energy Department Announces New Investment in Innovative Small Modular Reactor

255

Initial MCNP6 Release Overview  

Science Conference Proceedings (OSTI)

Technical Paper / Special Issue on the Initial Release of MCNP6 / Radiation Transport and Protection

T. Goorley; M. James; T. Booth; F. Brown; J. Bull; L. J. Cox; J. Durkee; J. Elson; M. Fensin; R. A. Forster; J. Hendricks; H. G. Hughes; R. Johns; B. Kiedrowski; R. Martz; S. Mashnik; G. McKinney; D. Pelowitz; R. Prael; J. Sweezy; L. Waters; T. Wilcox; T. Zukaitis

256

Transfer printing of patterned metal films using parylene C coated surfaces  

Science Conference Proceedings (OSTI)

Successful transfer printing of aluminum (Al), copper (Cu), silver (Ag), nickel (Ni) and gold (Au) films is demonstrated. Previously, Al, Cu, Ag, and Ni films have exhibited relatively strong adhesion to silicon (Si) substrates resulting in poor transfer ... Keywords: Flexible electronics, Surface treatments, Transfer printing

J. Bavier; J. Cumings; D. R. Hines

2013-04-01T23:59:59.000Z

257

Bayesian network model of overall print quality: Construction and structural optimisation  

Science Conference Proceedings (OSTI)

Prediction of overall visual quality based on instrumental measurements is a challenging task. Despite the several proposed models and methods, there exists a gap between the instrumental measurements of print and human visual assessment of natural images. ... Keywords: Bayesian networks, Overall visual quality, Print quality assessment, Structural optimisation

Tuomas Eerola; Lasse Lensu; Joni-Kristian Kamarainen; Tuomas Leisti; Risto Ritala; Göte Nyman; Heikki Kälviäinen

2011-08-01T23:59:59.000Z

258

Design and development of high precision elastomeric-stamp wrapping system for roll-to-roll multi-layer microcontact printing  

E-Print Network (OSTI)

Microcontact printing is an emerging printing technique that could potentially find application in the electronics industry. High-speed roll-to-roll equipment was built at Nano Terra, Inc in 2008, for microcontact printing. ...

Datar, Charudatta Achyut

2009-01-01T23:59:59.000Z

259

Hometown News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Publications Hometown News Releases News Releases issued in: 2011, 2010, 2009, 2008 October 18, 2013 NETL Researcher Honored with 2013 Federal Laboratory Consortium Award Morgantown, W.Va. - Dr. Stephen E. Zitney of the National Energy Technology Laboratory (NETL) has been awarded a Mid-Atlantic region Federal Laboratory Consortium (FLC) award for Excellence in Technology Transfer for his work on the 3D Virtual Energy Plant Simulator and Immersive Training System. October 18, 2013 NETL Researcher Honored with 2013 Federal Laboratory Consortium Award Albany, Ore. - Jeffrey Hawk of the National Energy Technology Laboratory (NETL) has been awarded a Far West region Federal Laboratory Consortium (FLC) award for Outstanding Technology Development for his work on Superior Heat Resistant Alloys through Controlled Homogenization.

260

Press Pass - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

7 Press Release Archive 7 Press Release Archive The Midnight Ride of the CMS Tracking Detector 12/20/07 Industry and Research Heavyweights Collaborate to Demonstrate Data Transport Capability at SC07 11/12/07 Auger Observatory closes in on long-standing mystery, links highest-energy cosmic rays with violent black holes 11/08/07 Fermilab environmental program receives international recognition 10/15/07 Fermilab in Top 10 list of Chicagoland Scientific Achievements 10/02/07 Volunteers Welcome at Fermilab's Prairie Harvest on Oct. 6 and Nov. 3 09/28/07 Fermilab named one of the Chicago area's best places to work 09/25/07 Anna Zuccarini, Naperville, leads Department of Energy education program for undergraduates 08/10/07 Pierre Auger Observatory shares cosmic-ray data with public, students 07/03/07

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

WIPP News Releases - 2004  

NLE Websites -- All DOE Office Websites (Extended Search)

4 News Releases 4 News Releases November 4 Detwiler Resumes Position at DOE Headquarters October 14 WIPP Mine Rescue Team First in Missouri October 12 DOE Announces WIPP Contract Negotiations October 6 Washington TRU Solutions is Mine Operator of the Year September 28 Washington Group International Named Tops in Safety July 24 No Damage to WIPP Cargo in Roswell Traffic Accident July 22 WIPP Mine Rescue Team Wins "Overall Contest" at Nationals July 2 DOE Prevails in WIPP Court Case July 1 $1M to Fund Underground Science at WIPP April 6 NMED Approves Safer Testing Requirements for LANL Sealed Source Wastes April 1 WIPP Marks Five Years of Safe Operation March 30 EPA Approves Remote-Handled Waste Procedures for WIPP March 26 DOE Submits WIPP Compliance Recertification Application to EPA

262

SEPA Press Releases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

articles/181/1/SEPA Press Releases Southeastern Power articles/181/1/SEPA Press Releases Southeastern Power Administration 1166 Athens Tech Rd. Elberton, GA 30635-6711Phone: (706) 213-3800 en ENERGY EFFICIENCY AND RENEWABLE ENERGY REPORT - FY 2013 http://energy.gov/sepa/articles/energy-efficiency-and-renewable-energy-report-fy-2013 ENERGY EFFICIENCY AND RENEWABLE ENERGY REPORT - FY 2013

263

New Releases | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003 2002 2001 2000 1999 1998 1997 1996 1995 1994 Features Story Tips Audio Spots Honors and Awards Videos ORNL Review Magazine ORNL Reporter DOE Pulse Media Contacts Media Mentions RSS Feeds News Home | ORNL | News | News Releases News Releases ORNL's Office of Communications works with national, regional, and local media outlets on news stories about the laboratory. For more information on ORNL and its research and development activities, please refer to one of our Media Contacts. If you have a general media-related question or comment, you can send it to news@ornl.gov. 1-25 of 25 Results ORNL-UT researchers invent 'sideways' approach to 2-D hybrid materials ORNL-UT researchers invent 'sideways' approach to 2-D hybrid materials

264

JGI - News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases News Releases December 20, 2013 A gluttonous plant reveals how its cellular power plant devours foreign DNA. Amborella trichopoda, a sprawling shrub that grows on just a single island in the remote South Pacific, is the only plant in its family and genus. It is also one of the oldest flowering plants, having branched off from others about 200 million years ago. November 25, 2013 How Scavenging Fungi Became a Plant's Best Friend. Glomeromycota is an ancient lineage of fungi that has a symbiotic relationship with roots that goes back nearly 420 million years to the earliest plants. More than two thirds of the world's plants depend on this soil-dwelling symbiotic fungus to survive, including critical agricultural crops such as wheat, cassava, and rice. November 22, 2013

265

2009 WIPP News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

09 News Releases 09 News Releases December 21 Magnum Minerals to Buy WIPP Salt October 14 Agreement Reached Between WTS and Union Employees October 1 Truck Accident Did Not Involve WIPP Shipment September 18 WIPP Completes First RH-TRU Shipment from VNC July 24 DOE Issues Statement Concerning Debates Over Waste Disposal in Salt June 25 DOE Carlsbad Field Office Opens Local Recovery Act Office June 18 DOE Announces the Transfer of the WIPP Water Line to the City of Carlsbad June 3 Los Alamos National Laboratory Ships Remote-Handled Transuranic Waste to WIPP June 1 WIPP Mine Rescue Team Wins Best Overall at Competition April 24 Remote-Handled TRU Waste Shipments from the Savannah River Site Arrive Safely at WIPP March 31 Energy Secretary Chu Announces $384 Million in Recovery Act Funding for Environmental Cleanup in New Mexico

266

SR 2001 News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

SR 2001 News Releases SR 2001 News Releases Department of Energy Extends Contract at SRS - R-01-002 Savannah River Site's Martin Luther King, Jr. Day Observance - SR-01-01 DOE Announces Availability of Draft SEIS on Salt Processing Alternatives - SR-01-02 Media Availability For WIPP Shipment - SR-01-03 Savannah River Site Sends First Shipment Of Transuranic Waste To WIPP - SR-01-04 DOE Announces Availability Of Draft RFP On Salt Waste Processing Facility - SR-01-05 DOE Announces Wackenhut Services, Inc. - SR-01-06 DOE & DOL Hold Public Meeting For Energy Employees Occupational Illness Compensation Program Act - SR-01-07 DOE Announces Plans For Offsite Treatment & Disposal Of SRS Waste - SR-01-08 DOE Announces Availability Of Final Supplemental EIS And Identifies Preferred Salt Processing Alternative - SR-01-09

267

NACP Data Set Released  

NLE Websites -- All DOE Office Websites (Extended Search)

is pleased to announce the release of a data set associated is pleased to announce the release of a data set associated with The North American Carbon Program (NACP): NACP: MODIS Daily Land Incident 4-km PAR Images for North America, 2003-2005 . Data set prepared by S. Liang and D. Wang. This data set contains daily Moderate Resolution Imaging Spectroradiometer (MODIS) land incident photosynthetically active radiation (PAR) Images over North America for the years 2003 - 2005. The daily images were derived by integrating MODIS/Terra and MODIS/Aqua instantaneous PAR data where the instantaneous PAR data is estimated directly from Terra or Aqua MODIS 5-min L1b swath data (Liang et al., 2006 and Wang et al., 2010). The spatial distribution of this data set includes the MODIS tile subsets covering North America, Central America, portions of South America, and

268

WIPP News Releases - 1998  

NLE Websites -- All DOE Office Websites (Extended Search)

8 News Releases 8 News Releases DOE Notifies States and Tribes That First Shipment To WIPP Could Occur as Early as Mid-January - December 18, 1998 International Scientists, Engineers Make Stop in Carlsbad To Tour WIPP, Environmental Monitoring Center - November 19, 1998 WIPP Exercise Termed Success By Utah, DOE Officials - November 16, 1998 WIPP Contractor To Participate In Lea County Procurement Workshop - November 12, 1998 WIPP Crews Complete One Maintenance Project, On Schedule to Finish Second by Mid-December - November 10, 1998 Energy Department Awards $300,000 to City of Carlsbad To Help Boost Region's Economic Planning - November 4, 1998 Mansour Akbarzadeh Appointed WIPP Laboratories Manager - November 4, 1998 WIPP Mine Rescue Team Members Bring Home Four Awards From Missouri Competition - November 2, 1998

269

Atmospheric Release Advisory Capability  

SciTech Connect

The Atmospheric Release Advisory Capability (ARAC) project is a Department of Energy (DOE) sponsored real-time emergency response service available for use by both federal and state agencies in case of a potential or actual atmospheric release of nuclear material. The project, initiated in 1972, is currently evolving from the research and development phase to full operation. Plans are underway to expand the existing capability to continuous operation by 1984 and to establish a National ARAC Center (NARAC) by 1988. This report describes the ARAC system, its utilization during the past two years, and plans for its expansion during the next five to six years. An integral part of this expansion is due to a very important and crucial effort sponsored by the Defense Nuclear Agency to extend the ARAC service to approximately 45 Department of Defense (DOD) sites throughout the continental US over the next three years.

Dickerson, M.H.; Gudiksen, P.H.; Sullivan, T.J.

1983-02-01T23:59:59.000Z

270

E-print Network Help -- Energy, science, and technology for the research  

Office of Scientific and Technical Information (OSTI)

Help Help Basic Search ♦ Advanced Search ♦ Search Results ♦ Selecting and Exporting Results ♦ Source Status Spelling Suggestion ♦ Search Tips ♦ Content and Search Power ♦ Sharing a Page ♦ Disciplines ♦ Scientific Societies Database Collection Descriptions From the E-print Network, users can Search e-prints on multiple websites and databases, browse e-prints by Disciplines, browse a list of Scientific Societies, and receive Alerts for new e-prints added to the E-print Network. See Alerts Help for Information on the Alerts Service Basic Search Try our Basic Search basic search Just type in your key word(s), like "global warming", and select Search . You'll get results ranked by relevance. The higher the number of stars, stars the more relevant the document is to your query.

271

E-print Network Alerts -- Energy, science, and technology for the research  

Office of Scientific and Technical Information (OSTI)

E-print Alerts E-print Alerts Login User Name: Enter User Name Password: Forgot username or password? Login The E-print Alerts feature is a service that will automatically notify you when new e-print information is available in your specific areas of interest. Simply register for the service and then create a search strategy, which will be matched automatically against each new weekly update. Patrons will receive the results of the alert via e-mail. If you are a NEW PATRON, learn how to set up E-print Alerts to meet your needs. If you are an existing patron, enter your user name and password in the box on the right, then press the login button. You may review or modify your search, add a new search, and see search results. Some links on this page may take you to non-federal websites. Their

272

Printing Tiny Batteries | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Stories of Discovery & Innovation: "Printing" Stories of Discovery & Innovation: "Printing" Tiny Batteries? Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News Observing the Sparks of Life EFRC Events DOE Announcements Publications Contact BES Home 06.26.13 Stories of Discovery & Innovation: "Printing" Tiny Batteries? Print Text Size: A A A Subscribe FeedbackShare Page Researchers use sophisticated 3D printing techniques to create batteries the size of a grain of sand. This work, featured in the Office of Science's Stories of Discovery & Innovation, was supported in part by the Light-Materials Interactions for Energy Conversion (LMI), an EFRC led by Harry Atwater at the California Institute of Technology. Last modified: 6/26/2013 8:53:17

273

Multi-Layer Inkjet Printed Contacts for Silicon Solar Cells: Preprint  

DOE Green Energy (OSTI)

Ag, Cu, and Ni metallizations were inkjet printed with near vacuum deposition quality. The approach developed can be easily extended to other conductors such as Pt, Pd, Au, etc. Thick highly conducting lines of Ag and Cu demonstrating good adhesion to glass, Si, and printed circuit board (PCB) have been printed at 100-200 C in air and N2 respectively. Ag grids were inkjet-printed on Si solar cells and fired through the silicon nitride AR layer at 850 C, resulting in 8% cells. Next generation inks, including an ink that etches silicon nitride, have now been developed. Multi-layer inkjet printing of the etching ink followed by Ag ink produced contacts under milder conditions and gave solar cells with efficiencies as high as 12%.

Curtis, C. J.; van hest, M.; Miedaner, A.; Kaydanova, T.; Smith, L.; Ginley, D. S.

2006-05-01T23:59:59.000Z

274

EIA new releases  

Science Conference Proceedings (OSTI)

This report was prepared by the Energy Information Administration. It contains news releases on items of interest to the petroleum, coal, nuclear, electric and alternate fuels industries ranging from economic outlooks to environmental concerns. There is also a listing of reports by industry and an energy education resource listing containing sources for free or low-cost energy-related educational materials for educators and primary and secondary students.

Not Available

1994-12-01T23:59:59.000Z

275

Characterization of DuPont 9015, aqueous processable dry film photoresist for printed wiring boards. Topical report  

SciTech Connect

This report describes the evaluation of DuPont`s Riston 9015, fully aqueous processable dry film photoresist as a mask for gold plating, tin/lead plating, and print and etch patterning for printed circuit board products.

Goldammer, S.

1995-04-01T23:59:59.000Z

276

I United States Government Printing Office SUPERINTENDENT OF WCUMENTS  

Office of Legacy Management (LM)

onSree;sional atecord onSree;sional atecord I United States Government Printing Office SUPERINTENDENT OF WCUMENTS Wash~ngtm. D.C 20402 OFFEIAL BUSINESS Penalty for prwate use. 9300 Congressmnal Record (USPS 087-390) United States of America . :- PROCEEDINGS AND DEBATES OF THE 98' hCONGRESS, FIRST SESSION 0 * U.S -C3 Postage and Fees Pad U S Governme3n7t5Prmt~ng Office SECOND CLASS NEWSPAPER H-4578 ' CQNGRESSIONAL RECORD - HOUSE June 28, 1983 I H.J. Res. 273: Mr. BOLAND, Mr. WAXMAN, Mr. Oeeasrrk. Mr. BEDELL. Mr. BONER of Tennessee, Mr. OWENS, Mr. DAUB. Mr. CONTE. Mr. RA~ALL. Mr. GRAY, Mr. VANDER JAGT. Mr. TRAXLER. and Mr. VENTO. H. Con. Res. 107: Mr. KASICH. Mr. AuCO~N, Mr. CARPER, and Mr. BCHWER. H. Con. Res. 118: Mr. FISH. Mr. &INTO& Mr. KILDEE. Mr. SOLARZ, Mr. BRITT. Mr.

277

Printed Circuit Board Metal Powder Filters for Low Electron Temperatures  

E-Print Network (OSTI)

We report the characterisation of printed circuit boards (PCB) metal powder filters and their influence on the effective electron temperature which is as low as 22 mK for a quantum dot in a silicon MOSFET structure in a dilution refrigerator. We investigate the attenuation behaviour (10 MHz- 20 GHz) of filter made of four metal powders with a grain size below 50 um. The room-temperature attenuation of a stainless steel powder filter is more than 80 dB at frequencies above 1.5 GHz. In all metal powder filters the attenuation increases with temperature. Compared to classical powder filters, the design presented here is much less laborious to fabricate and specifically the copper powder PCB-filters deliver an equal or even better performance than their classical counterparts.

Filipp Mueller; Raymond N. Schouten; Matthias Brauns; Tian Gang; Wee Han Lim; Nai Shyan Lai; Andrew S. Dzurak; Wilfred G. van der Wiel; Floris A. Zwanenburg

2013-04-11T23:59:59.000Z

278

Seven LBA Data Sets Released  

NLE Websites -- All DOE Office Websites (Extended Search)

LBA-ECO Data Sets Released The ORNL DAAC and the LBA DIS announce the release of one data set from the CD-06 Carbon Dynamics team, and six data sets from the Land Use-Land Change...

279

Cray XC30 Press Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Release Cray XC30 Press Release CRAY UNVEILS THE CRAY XC30 Seattle, WA - November 8, 2012 - Global supercomputer leader Cray Inc. (Nasdaq: CRAY) today announced the launch of...

280

ORNL DAAC: Amazon Data Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Radiance Data Set Released The ORNL DAAC announces the release of a data set associated with the LBA-ECO component of the Large-Scale Biosphere-Atmosphere Experiment in Amazonia...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

PARS II Software Release Notes  

Energy.gov (U.S. Department of Energy (DOE))

New and improved functionality was released in Version 8.0.20120308 of PARS II. This release offers PARS II Users a significant number of enhancements across all facets of the application. These...

282

Media Release Media Contact FOR IMMEDIATE RELEASE Heather Rasmussen  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Release Media Contact Release Media Contact FOR IMMEDIATE RELEASE Heather Rasmussen September 22, 2011 Communication Specialist (801) 819-7623 hrasmussen@wecc.biz WECC releases its first-ever transmission plan for the Western Interconnection The Western Electricity Coordinating Council (WECC) announced the release of its first 10-Year Regional Transmission Plan (Plan) for the Western Interconnection. Looking ahead to 2020, the Plan focuses on how to meet the Western Interconnection's transmission requirements; including transmission expansion, new generation development, adapting to local, state/provincial, and federal policy changes, and their associated financial and environmental costs.

283

Gas releases from salt  

Science Conference Proceedings (OSTI)

The occurrence of gas in salt mines and caverns has presented some serious problems to facility operators. Salt mines have long experienced sudden, usually unexpected expulsions of gas and salt from a production face, commonly known as outbursts. Outbursts can release over one million cubic feet of methane and fractured salt, and are responsible for the lives of numerous miners and explosions. Equipment, production time, and even entire mines have been lost due to outbursts. An outburst creates a cornucopian shaped hole that can reach heights of several hundred feet. The potential occurrence of outbursts must be factored into mine design and mining methods. In caverns, the occurrence of outbursts and steady infiltration of gas into stored product can effect the quality of the product, particularly over the long-term, and in some cases renders the product unusable as is or difficult to transport. Gas has also been known to collect in the roof traps of caverns resulting in safety and operational concerns. The intent of this paper is to summarize the existing knowledge on gas releases from salt. The compiled information can provide a better understanding of the phenomena and gain insight into the causative mechanisms that, once established, can help mitigate the variety of problems associated with gas releases from salt. Outbursts, as documented in mines, are discussed first. This is followed by a discussion of the relatively slow gas infiltration into stored crude oil, as observed and modeled in the caverns of the US Strategic Petroleum Reserve. A model that predicts outburst pressure kicks in caverns is also discussed.

Ehgartner, B.; Neal, J.; Hinkebein, T.

1998-06-01T23:59:59.000Z

284

Riola release report  

SciTech Connect

Eleven hours after execution of the Riola Event (at 0826 PDT on 25 September 1980) in hole U2eq of the Nevada Test Site (NTS), a release of radioactivity began. When the seepage stopped at about noon the following day, up to some 3200 Ci of activity had been dispersed by light variable winds. On 26 September, examination of the geophone records showed six hours of low-level, but fairly continuous, activity before the release. Electrical measurements indicated that most cables were still intact to a depth below the stemming platform. A survey of the ground zero area showed that the seepage came through cracks between the surface conductor and the pad, through cracks in the pad, and through a crack adjacent to the pad around the mousehole (a small hole adjacent to the emplacement hole). To preclude undue radiation exposure or injury from a surprise subsidence, safety measures were instituted. Tritium seepage was suffucient to postpone site activities until a box and pipeline were emplaced to contain and remove the gas. Radiation release modeling and calculations were generally consistent with observations. Plug-hole interaction calculations showed that the alluvium near the bottom of the plug may have been overstressed and that improvements in the design of the plug-medium interface can be made. Experimental studies verified that the surface appearance of the plug core was caused by erosion, but, assuming a normal strength for the plug material, that erosion alone could not account for the disappearance of such a large portion of the stemming platform. Samples from downhole plug experiments show that the plug may have been considerably weaker than had been indicted by quality assurance (QA) samples. 19 references, 32 figures, 10 tables.

Woodward, E.C.

1983-08-04T23:59:59.000Z

285

DOE Office of Science Releases Journal of Undergraduate Research Volume VII  

Office of Science (SC) Website

DOE Office of DOE Office of Science Releases Journal of Undergraduate Research Volume VII News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 11.20.07 DOE Office of Science Releases Journal of Undergraduate Research Volume VII Print Text Size: A A A Subscribe FeedbackShare Page The Office of Workforce Development for Teachers and Scientist (WDTS) in the Department of Energy's Office of Science today announced the release of Volume 7 of the Journal of Undergraduate Research (JUR). The JUR is the Department of Energy's premier undergraduate research journal, highlighting the work of over 600 students who have participated

286

FY 2011 Funding Request Released | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

FY 2011 Funding Request Released FY 2011 Funding Request Released Energy Frontier Research Centers (EFRCs) EFRCs Home Centers Research Science Highlights News & Events EFRC News EFRC Events DOE Announcements Publications Contact BES Home 02.01.10 FY 2011 Funding Request Released Print Text Size: A A A Subscribe FeedbackShare Page Feb 1, 2010 :: The FY 2011 funding request for Energy Frontier Research Centers (EFRCs) is $140,000,000, which includes an increase of $40,000,000 over the FY 2010 appropriations. Continued support of $100,000,000 is provided for EFRCs, which were established to integrate the talents and expertise of leading scientists in a setting designed to accelerate research toward meeting our critical energy challenges. The EFRCs harness the most basic and advanced discovery research in a concerted effort to

287

Apparatus And Method Of Using Flexible Printed Circuit Board In Optical Transceiver Device  

DOE Patents (OSTI)

This invention relates to a flexible printed circuit board that is used in connection with an optical transmitter, receiver or transceiver module. In one embodiment, the flexible printed circuit board has flexible metal layers in between flexible insulating layers, and the circuit board comprises: (1) a main body region orientated in a first direction having at least one electrical or optoelectronic device; (2) a plurality of electrical contact pads integrated into the main body region, where the electrical contact pads function to connect the flexible printed circuit board to an external environment; (3) a buckle region extending from one end of the main body region; and (4) a head region extending from one end of the buckle region, and where the head region is orientated so that it is at an angle relative to the direction of the main body region. The electrical contact pads may be ball grid arrays, solder balls or land-grid arrays, and they function to connect the circuit board to an external environment. A driver or amplifier chip may be adapted to the head region of the flexible printed circuit board. In another embodiment, a heat spreader passes along a surface of the head region of the flexible printed circuit board, and a window is formed in the head region of the flexible printed circuit board. Optoelectronic devices are adapted to the head spreader in such a manner that they are accessible through the window in the flexible printed circuit board.

Anderson, Gene R. (Albuquerque, NM); Armendariz, Marcelino G. (Albuquerque, NM); Bryan, Robert P. (Albuquerque, NM); Carson, Richard F. (Albuquerque, NM); Duckett, III, Edwin B. (Albuquerque, NM); McCormick, Frederick B. (Albuquerque, NM); Peterson, David W. (Sandia Park, NM); Peterson, Gary D. (Albuquerque, NM); Reysen, Bill H. (Lafayette, CO)

2005-03-15T23:59:59.000Z

288

Organ printing: computer-aided jet-based 3D tissue engineering, Trends in Biotechnology 21  

E-Print Network (OSTI)

Tissue engineering technology promises to solve the organ transplantation crisis. However, assembly of vascularized 3D soft organs remains a big challenge. Organ printing, which we define as computer-aided, jet-based 3D tissue-engineering of living human organs, offers a possible solution. Organ printing involves three sequential steps: pre-processing or development of ‘blueprints ’ for organs; processing or actual organ printing; and postprocessing or organ conditioning and accelerated organ maturation. A cell printer that can print gels, single cells and cell aggregates has been developed. Layer-by-layer sequentially placed and solidified thin layers of a thermo-reversible gel could serve as ‘printing paper’. Combination of an engineering approach with the developmental biology concept of embryonic tissue fluidity enables the creation of a new rapid prototyping 3D organ printing technology, which will dramatically accelerate and optimize tissue and organ assembly. 'Give us the tools and we will finish the job'-Winston Churchill Although the terms ‘tissue engineering ’ and ‘organ printing ’ were introduced only recently (1987 and 1999 respectively), the study of cell coalescence and tissue assembly has a much longer history and is deeply rooted in developmental biology [1]. The classic work

Vladimir Mironov; Thomas Bol; Thomas Trusk; Gabor Forgacs; Roger; R. Markwald

2003-01-01T23:59:59.000Z

289

Press Pass - Press Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

5 Press Release Archive 5 Press Release Archive High Energy Physics Team Captures Network Prize at SC|05 12/6/05 Beyond Einstein: A live Webcast from around the Globe Thursday, December 1, 2005, from 5:00 a.m. to 5:00 p.m. CST 11/21/05 Pierre Auger Observatory Celebrates Progress on Detector Array and Presents First Science Results 11/10/05 Science and Reading Combine in Family Literacy Experience at Fermilab on Thursday, November 17 10/11/05 Media invited to attend Pierre Auger Observatory Celebration, to be held November 9-12, 2005 in Malargüe, Argentina 11/2/05 Science and Reading Combine in Family Literacy Experience at Fermilab on Thursday, November 17 10/11/05 Volunteers Welcome at Fermilab's Prairie Harvest on Oct. 1 and 29 9/26/05 Hot Topics Featured at World Year of Physics Symposium for Students and Teachers, Saturday, October 8 from 8 a.m. to 3:15 p.m. at Fermilab's Ramsey Auditorium 9/14/05

290

Press Releases | National Nuclear Security Administration  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Press Releases Home > Media Room > Press Releases Press Releases...

291

News Releases | Biosciences Division  

NLE Websites -- All DOE Office Websites (Extended Search)

Alaska Soil Research Alaska Soil Research BIO Home Page About BIO News Releases Research Publications People Contact Us Organization Chart Site Index Inside BIO BIO Safety About Argonne Alaska Soil Research Project Aiming to Improve Understanding of Global Climate November 26, 2012 A research team being led by Julie Jastrow, an ecologist at the U.S. Department of Energy's (DOE) Argonne National Laboratory, recently traveled to the North Slope of Alaska as part of a soil research project that aims to ultimately help improve and validate global climate models. Using jackhammer to dig a sampling pit in frozen soil After removing the seasonally thawed soil active layer in coastal plain tundra near Prudhoe Bay, members of the Argonne research team use a jackhammer to dig through frozen soil, creating a soil pit from which different soil layers can be viewed and sampled.

292

News Releases - 2011  

NLE Websites -- All DOE Office Websites (Extended Search)

/newsroom/_assets/images/newsroom-icon.jpg News Releases - 2011 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory announces top 10 science stories of 2011 Stories include alternative energy research, magnetic fields, disease tracking, the study of Mars, climate change, fuel cells, solar wind, and magnetic reconnection. - 12/23/11 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

293

News Releases - 2010  

NLE Websites -- All DOE Office Websites (Extended Search)

/newsroom/_assets/images/newsroom-icon.jpg News Releases - 2010 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Bradbury Science Museum Bradbury Science Museum announces winter opening hours Museum will be closed on Christmas Day (December 25) and New Year's Day (January 1, 2011). - 12/21/10 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. LANL announces Top 10 science & technology developments of 2010 Top 10 developments based on major programmatic milestones, strategic

294

Efficient Sugar Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Sugar Sugar Release by the Cellulose Solvent-Based Lignocellulose Fractionation Technology and Enzymatic Cellulose Hydrolysis GEOFFREY MOXLEY, † ZHIGUANG ZHU, † AND Y.-H. PERCIVAL ZHANG* ,†,‡,§ Biological Systems Engineering Department, Virginia Polytechnic Institute and State University, 210-A Seitz Hall, Blacksburg, Virginia 24061, Institute for Critical Technology and Applied Science (ICTAS), Virginia Polytechnic Institute and State University, Virginia 24061, and Department of Energy (DOE) BioEnergy Science Center, Oak Ridge, Tennessee 37831 Efficient liberation of fermentable soluble sugars from lignocellulosic biomass waste not only decreases solid waste handling but also produces value-added biofuels and biobased products. Industrial hemp, a special economic crop, is cultivated for its high-quality fibers and high-value seed oil, but its hollow

295

News Releases - 2008  

NLE Websites -- All DOE Office Websites (Extended Search)

/newsroom/_assets/images/newsroom-icon.jpg News Releases - 2008 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. New airport liquid analysis system undergoes testing at Albuquerque International Sunport A new tool that distinguishes potential-threat liquids from the harmless shampoos and sodas a regular traveler might take aboard an aircraft. - 12/16/08 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

296

News Releases - 2009  

NLE Websites -- All DOE Office Websites (Extended Search)

/newsroom/_assets/images/newsroom-icon.jpg News Releases - 2009 We are your source for reliable, up-to-date news and information; our scientists and engineers can provide technical insights on our innovations for a secure nation. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Science satellites seek Santa Los Alamos scientists will use two advanced science satellites to mark the course taken by the elfin traveler. - 12/16/09 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials.

297

Release Date: April 2010  

Gasoline and Diesel Fuel Update (EIA)

April 2010 DOE/EIA-0121 (2009/04Q) April 2010 DOE/EIA-0121 (2009/04Q) Next Release Date: June 2010 Quarterly Coal Report October - December 2009 April 2010 U.S. Energy Information Administration Office of Coal, Nuclear, Electric, and Alternate Fuels U.S. Department of Energy Washington, DC 20585 _____________________________________________________________________________ This report is available on the Web at: http://www.eia.doe.gov/cneaf/coal/quarterly/qcr.pdf _____________________________________________ This report was prepared by the U.S. Energy Information Administration (EIA), the independent statistical and analytical agency within the U.S. Department of Energy. By law, EIA's data, analyses, and forecasts are independent of approval by any other officer or employee of the United States Government. The views in this

298

QUICK RELEASABLE DRIVE  

DOE Patents (OSTI)

A quick releasable mechanical drive system suitable for use in a nuclear reactor is described. A small reversible motor positions a control rod by means of a worm and gear speed reducer, a magnetic torque clutch, and a bell crank. As the control rod is raised to the operating position, a heavy coil spring is compressed. In the event of an emergency indicated by either a''scram'' signal or a power failure, the current to the magnetic clutch is cut off, thereby freeing the coil spring and the bell crank positioner from the motor and speed reduction gearing. The coil spring will immediately act upon the bell crank to cause the insertion of the control rod. This arrangement will allow the slow, accurate positioning of the control rod during reactor operation, while providing an independent force to rapidly insert the rod in the event of an emergency.

Dickson, J.J.

1958-07-01T23:59:59.000Z

299

NETL: News Release - DOE National Laboratory Releases Annual...  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases Annual Accomplishments Report NETL Cites Research Successes that Balance Energy Supply, Economy, Environment Washington, D.C. -The National Energy Technology...

300

Printing Highly-aligned Single-crystalline Organic Electronic Thin Films |  

NLE Websites -- All DOE Office Websites (Extended Search)

Printing Highly-aligned Single-crystalline Organic Electronic Thin Films Printing Highly-aligned Single-crystalline Organic Electronic Thin Films Monday, September 23, 2013 Organic semiconductor materials have some intriguing advantages compared to their inorganic counterparts: low-cost and versatile manufacturing (e.g. roll-to-roll printing), material abundance and new form factors (e.g. flexible, transparent and stretchable). However, solution-processed organic devices are usually made and optimized with poorly scalable fabrication using lab-based techniques such as spin coating or dip coating. A better route for organic-electronics fabrication is printing, which can potentially realize large-area, high-throughput, low-cost fabrication on an industrial scale. Fluence image FLUENCE: fluid-enhanced crystal engineering. Solution shearing (a) using a

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Bimetallic bars with local control of composition by three-dimensional printing  

E-Print Network (OSTI)

Three Dimensional Printing (3DP) is a process that enables the fabrication of geometrically complex parts directly from computer-aided design (CAD) models. The success of 3DP as an alternative manufacturing technology to ...

Techapiesancharoenkij, Ratchatee, 1979-

2004-01-01T23:59:59.000Z

302

Nuclear Maintenance Applications Center: Assessment of Printed Circuit Board Diagnostic Techniques  

Science Conference Proceedings (OSTI)

This project evaluated the techniques, theoretical methods, and recommendations made in previous EPRI reports on printed circuit boards (PCBs). The goal was to find techniques to help manage PCB life.

2009-03-31T23:59:59.000Z

303

Development of tissue printed nitrocellulose cards/arrays for real time PCR amplification and detection  

E-Print Network (OSTI)

Tissue print technology allows for the transfer of cellular material from tissue onto a nitrocellulose film for immunocytochemical assays. The MIT BioInstrumentation Laboratory is currently developing a novel cancer marker ...

Chia, Helena Nien-Hwa, 1982-

2004-01-01T23:59:59.000Z

304

Elastomeric contact printing for sub-micron patterning of organic films  

E-Print Network (OSTI)

In this thesis, a novel diffusion-based contact-printing technology is investigated, by which a wide variety of low molecular weight organic materials can be patterned without added temperature, pressure, or chemical ...

Ramanan, Sulinya

2012-01-01T23:59:59.000Z

305

Deposition of colloidal quantum dots by microcontact printing for LED display technology  

E-Print Network (OSTI)

This thesis demonstrates a new deposition method of colloidal quantum dots within a quantum dot organic light-emitting diode (QD-LED). A monolayer of quantum dots is microcontact printed as small as 20 ,Lm lines as well ...

Kim, LeeAnn

2006-01-01T23:59:59.000Z

306

Accelerated Publication: Ag nanoparticle-based inkjet printed planar transmission lines for RF and microwave applications: Considerations on ink composition, nanoparticle size distribution and sintering time  

Science Conference Proceedings (OSTI)

Sintering of Ag nanoparticle (NP)-based inkjet printed tracks is a crucial process for the next-generation digitally printed electronics. In particular, while the digital printing, as additive technology, is now well settled for what concerns either ... Keywords: Inkjet printing, Microwave planar transmission lines, Real-time measurements, Silver nanoparticles

A. Chiolerio; M. Cotto; P. Pandolfi; P. Martino; V. Camarchia; M. Pirola; G. Ghione

2012-09-01T23:59:59.000Z

307

SANDIA REPORT  

NLE Websites -- All DOE Office Websites (Extended Search)

SANDIA REPORT SANDIA REPORT SAND 2011-3958 Unlimited Release Printed June 2011 Site Environmental Report for 2010 Sandia National Laboratories, California B.L. Larsen Prepared by Sandia National Laboratories Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear

308

Prints and copies Black/white XEROX PRINTERS Paper type white  

E-Print Network (OSTI)

Prints and copies Black/white XEROX PRINTERS A4 A3 Paper type white 80 gram one-sided 0,04 0 glossy 0,15 coloured paper 80 gram 0,03 0,05 white or coloured paper 120 gram 0,05 sheet (only XEROX,09 two-sided 0,06 0,15 Prints and copies Fullcolour XEROX PRINTERS 7556 - 7655 - 7335 A4 A3 Paper type

Franssen, Michael

309

Reliability of chip on glass module fabricated with direct printing method  

Science Conference Proceedings (OSTI)

To investigate the effect of the sintering temperature on the electrical properties of a chip on glass (COG) module, a screen-printed conductive circuit was sintered at various temperatures, viz. 150, 200, 250 and 300^oC for 30min. An anisotropic conductive ... Keywords: Ag nanopaste, Anisotropic conductive film (ACF), Chip on glass (COG), Reliability, Screen-printing, Temperature-humidity test (THT)

Young-Chul Lee, Jong-Woong Kim, Yongil Kim, Seung-Boo Jung

2013-07-01T23:59:59.000Z

310

Printing out Particle Detectors with 3D-Printers, a Potentially Transformational Advance for HEP Instrumentation  

E-Print Network (OSTI)

This white paper suggests posing a "grand challenge" to the HEP instrumentation community, i.e. the aggressive development of additive manufacturing, also known as 3D-printing, for the production of particle detectors in collaboration with industry. This notion is an outcome of discussions within the instrumentation frontier group during the 2013 APS-DPF Snowmass summer study conducted by the U.S. HEP community. Improvements of current industrial 3D-printing capabilities by one to two orders of magnitude in terms of printing resolution, speed, and object size together with developing the ability to print composite materials could enable the production of any desired 3D detector structure directly from a digital model. Current industrial 3D-printing capabilities are briefly reviewed and contrasted with capabilities desired for printing detectors for particle physics, with micro-pattern gaseous detectors used as a first example. A significant impact on industrial technology could be expected if HEP were to part...

Hohlmann, M

2013-01-01T23:59:59.000Z

311

Printing out Particle Detectors with 3D-Printers, a Potentially Transformational Advance for HEP Instrumentation  

E-Print Network (OSTI)

This white paper suggests posing a "grand challenge" to the HEP instrumentation community, i.e. the aggressive development of additive manufacturing, also known as 3D-printing, for the production of particle detectors in collaboration with industry. This notion is an outcome of discussions within the instrumentation frontier group during the 2013 APS-DPF Snowmass summer study conducted by the U.S. HEP community. Improvements of current industrial 3D-printing capabilities by one to two orders of magnitude in terms of printing resolution, speed, and object size together with developing the ability to print composite materials could enable the production of any desired 3D detector structure directly from a digital model. Current industrial 3D-printing capabilities are briefly reviewed and contrasted with capabilities desired for printing detectors for particle physics, with micro-pattern gaseous detectors used as a first example. A significant impact on industrial technology could be expected if HEP were to partner with industry in taking on such a challenge.

M. Hohlmann

2013-09-03T23:59:59.000Z

312

Next Release Date: September 2012  

Annual Energy Outlook 2012 (EIA)

October 2010 DOEEIA-0121 (201002Q) Next Release Date: September 2012 Revised: July 2012 Quarterly Coal Report April - June 2010 October 2010 U.S. Energy Information...

313

NREL: News - Release Archives 2010  

NLE Websites -- All DOE Office Websites (Extended Search)

engines and vehicles. September 10, 2010 NREL Releases Estimate of National Offshore Wind Energy Potential The U.S. Department of Energy's National Renewable Energy Laboratory...

314

Press release For Immediate Release Seattle, USA. June 6, 2008  

E-Print Network (OSTI)

Press release ­ For Immediate Release Seattle, USA. June 6, 2008 Global trade of woody biomass has almost doubled in five years With the increasing demand for woody biomass, global trade of particularly fiber source for energy generation but because of higher demand for renewable energy and increasing

315

AEO2014 Early Release Overview  

U.S. Energy Information Administration (EIA) Indexed Site

Administration | Annual Energy Outlook 2014 Early Release Overview Administration | Annual Energy Outlook 2014 Early Release Overview AEO2014 Early Release Overview Executive summary Projections in the Annual Energy Outlook 2014 (AEO2014) Reference case focus on the factors that shape U.S. energy markets through 2040, under the assumption that current laws and regulations remain generally unchanged throughout the projection period. The early release provides a basis for the examination and discussion of energy market trends and serves as a starting point for analysis of potential changes in U.S. energy policies, rules, or regulations or possible technology breakthroughs. Readers are encouraged to review the full range of cases that will be presented when the complete AEO2014 is released in 2014, exploring key

316

AEO2013 Early Release Overview  

Gasoline and Diesel Fuel Update (EIA)

3 Early Release Overview 3 Early Release Overview AEO2013 Early Release Overview Executive summary Projections in the Annual Energy Outlook 2013 (AEO2013) Reference case focus on the factors that shape U.S. energy markets through 2040, under the assumption that current laws and regulations remain generally unchanged throughout the projection period. This early release focuses on the AEO2013 Reference case, which provides the basis for examination and discussion of energy market trends and serves as a starting point for analysis of potential changes in U.S. energy policies, rules, or regulations or potential technology breakthroughs. Readers are encouraged to review the full range of cases that will be presented when the complete AEO2013 is released in early 2013, exploring key uncertainties in the Reference case. Major highlights in the AEO2013 Reference case include:

317

NETL: News Release - Department of Energy Releases Updated Report Tracking  

NLE Websites -- All DOE Office Websites (Extended Search)

Department of Energy Releases Updated Report Tracking Resurgence of Coal-Fired Power Plants Department of Energy Releases Updated Report Tracking Resurgence of Coal-Fired Power Plants Report Shows 151 Proposed and New Plants, 90 Gigawatts of Capacity by 2020 WASHINGTON, DC - A newly released Department of Energy report shows that many power producers are turning to coal as the most economic and abundant national resource for electricity generation. The report, titled Tracking New Coal-Fired Power Plants, was developed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) to provide a snapshot of coal's resurgence in the generation of electric power. The report was derived from a database that NETL maintains to track proposals for new coal-fired power plants. Created in 2002, the database is updated quarterly as new information is released and cataloged. The results contained in the database are derived from information publicly available from a variety of tracking organizations and news groups.

318

Disability equality and discrimination in higher education: staff and student perceptions of the 'reasonable' adjustments made for print disabled students.  

E-Print Network (OSTI)

??The aim of this research was to explore staff and student experiences of the barriers print disabled students face and the adjustments made to overcome… (more)

Rowlett, Emma Jane

2011-01-01T23:59:59.000Z

319

Commercial SNF Accident Release Fractions  

Science Conference Proceedings (OSTI)

The purpose of this analysis is to specify and document the total and respirable fractions for radioactive materials that could be potentially released from an accident at the repository involving commercial spent nuclear fuel (SNF) in a dry environment. The total and respirable release fractions are used to support the preclosure licensing basis for the repository. The total release fraction is defined as the fraction of total commercial SNF assembly inventory, typically expressed as an activity inventory (e.g., curies), of a given radionuclide that is released to the environment from a waste form. Radionuclides are released from the inside of breached fuel rods (or pins) and from the detachment of radioactive material (crud) from the outside surfaces of fuel rods and other components of fuel assemblies. The total release fraction accounts for several mechanisms that tend to retain, retard, or diminish the amount of radionuclides that are available for transport to dose receptors or otherwise can be shown to reduce exposure of receptors to radiological releases. The total release fraction includes a fraction of airborne material that is respirable and could result in inhalation doses; this subset of the total release fraction is referred to as the respirable release fraction. Accidents may involve waste forms characterized as: (1) bare unconfined intact fuel assemblies, (2) confined intact fuel assemblies, or (3) canistered failed commercial SNF. Confined intact commercial SNF assemblies at the repository are contained in shipping casks, canisters, or waste packages. Four categories of failed commercial SNF are identified: (1) mechanically and cladding-penetration damaged commercial SNF, (2) consolidated/reconstituted assemblies, (3) fuel rods, pieces, and debris, and (4) nonfuel components. It is assumed that failed commercial SNF is placed into waste packages with a mesh screen at each end (CRWMS M&O 1999). In contrast to bare unconfined fuel assemblies, the container that confines the fuel assemblies could provide an additional barrier for diminishing the total release fraction should the fuel rod cladding breach during an accident. This analysis, however, does not take credit for the additional barrier and establishes only the total release fractions for bare unconfined intact commercial SNF assemblies, which may be conservatively applied to confined intact commercial I SNF assemblies.

J. Schulz

2004-11-05T23:59:59.000Z

320

Controlled release liquid dosage formulation  

DOE Patents (OSTI)

A liquid dual coated dosage formulation sustained release pharmaceutic having substantial shelf life prior to ingestion is disclosed. A dual coating is applied over controlled release cores to form dosage forms and the coatings comprise fats melting at less than approximately 101.degree. F. overcoated with cellulose acetate phthalate or zein. The dual coated dosage forms are dispersed in a sugar based acidic liquid carrier such as high fructose corn syrup and display a shelf life of up to approximately at least 45 days while still retaining their release profiles following ingestion. Cellulose acetate phthalate coated dosage form cores can in addition be dispersed in aqueous liquids of pH <5.

Benton, Ben F. (Centerburg, OH); Gardner, David L. (Bellville, OH)

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

ARM - Features and Releases Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

CenterFeaturesFeatures and Releases Archive CenterFeaturesFeatures and Releases Archive Media Contact Lynne Roeder lynne-dot-roeder-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes89 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 BAECC 1 BBOP 4 MAGIC 12 MC3E 17 SGP 2 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog feed Events feed Employment Research Highlights Data Announcements Education News Archive What's this? Social Media Guidance Features and Releases Archive 2013 Dec 30 Pole Position: New Field Campaigns Explore Arctic and Antarctic Atmosphere Nov 13 Research Flights Completed for Biomass Burning Field Campaign Nov 07 MAGIC Takes a Bow

322

Diffusion Models for Transient Releases  

Science Conference Proceedings (OSTI)

Plume models were developed to predict the concentration due to a nonbuoyant release from a source whose strength decreases exponentially with time of a pollutant that reacts in the atmosphere at a first-order rate. Models were developed that ...

Thomas J. Overcamp

1990-12-01T23:59:59.000Z

323

Final Green Zia Award Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Plant P.O. Box 3090 Carlsbad, New Mexico 88221 For Immediate Release WIPP Receives Green Zia Award for Environmental Excellence CARLSBAD, N.M., August 16, 2012- The Waste...

324

AEO2012 Early Release Overview  

Gasoline and Diesel Fuel Update (EIA)

AEO2012 Early Release Overview Total U.S. consumption of liquid fuels, including both fossil fuels and biofuels, grows from 37.2 quadrillion Btu (19.2 million barrels per day)...

325

Hazard-free connection release.  

E-Print Network (OSTI)

??Fault-tolerant communication in a distributed system requires reliable connection management and message delivery. Reliable connection management includes the guarantee of hazard-free release, in which no… (more)

Walter, Jennifer E.

2012-01-01T23:59:59.000Z

326

To save campaign costs, use the e-Giving paperless or print  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

save campaign costs, use the e-Giving paperless or print save campaign costs, use the e-Giving paperless or print and submit form options at www.cfcnca.org. You can donate through payroll deduction to spread your giving over the year or choose credit/debit card, electronic check, cash or check. If you complete your Pledge Form online, you also must write your Social Security Number on the copy that is submitted to the payroll office for payroll deduction. Check with your Keyworker if your payroll office accepts an alternate identification number. If using the paper Pledge Form, please follow these steps: ➤ Print all information FIRMLY using a ballpoint pen because you are making three copies. Refer to the charity code numbers and descriptions in our online charity search or in this catalog. All charities have a five-digit

327

E-print Network home page -- Energy, science, and technology for the  

Office of Scientific and Technical Information (OSTI)

Energy, science, and technology for the research community! Energy, science, and technology for the research community! Enter Search Terms Search Advanced Search The E-print Network is . . . . . . a vast, integrated network of electronic scientific and technical information created by scientists and research engineers active in their respective fields, all full-text searchable. E-print Network is intended for use by other scientists, engineers, and students at advanced levels. . . . a gateway to over 35,300 websites and databases worldwide, containing over 5.5 million e-prints in basic and applied sciences, primarily in physics but also including subject areas such as chemistry, biology and life sciences, materials science, nuclear sciences and engineering, energy research, computer and information technologies, and other disciplines of

328

Press Releases | Stanford Synchrotron Radiation Lightsource  

NLE Websites -- All DOE Office Websites (Extended Search)

Press Releases Press Releases 2012 Press Releases December 10, 2012 Experiment Finds Ulcer Bug's Achilles' Heel (see Press Release) June 6, 2012 New secrets from "Bay of the Pirates" warship that sunk 2,300 years ago (see Press Release) March 5, 2012 X-rays Reveal How Soil Bacteria Carry Out Surprising Chemistry (see Press Release) 2011 Press Releases July 3, 2011 Researchers Decipher Protein Structure of Key Molecule in DNA Transcription System (see Press Release) June 30, 2011 X-rays Reveal Patterns in the Plumage of the First Birds (see Press Release) March 24, 2011 High-temperature Superconductor Spills Secret: A New Phase of Matter (see Press Release) March 23, 2011 First Image of Protein Residue in 50 Million Year Old Reptile Skin (see Press Release) 2010 Press Releases

329

Press Releases | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

News Press Releases Press Releases Press Releases provide information about what has been happening in and around Y-12. December 2013 B&W Y-12 donates 75,000 to Emory Valley...

330

Collection Descriptions for the E-print Network -- Energy, science, and  

Office of Scientific and Technical Information (OSTI)

Collection Descriptions Collection Descriptions E-prints on Subject Web Sites Coverage: provided by each unique Web site crawled (over 2.5 million documents) Description: The E-prints on Subject Web Sites collections contain electronic scientific and technical information created by scientists and research engineers active in their respective fields. These collections are intended for use by other scientists, engineers, and students at advanced levels in basic and applied sciences. Subject categories are Biology and Medicine; Biotechnology; Chemistry; Computer Technologies and Information Sciences; Energy Storage, Conversion and Utilization; Engineering; Environmental Management and Restoration Technologies; Environmental Sciences and Ecology; Fission and Nuclear Technologies; Fossil Fuels;

331

Energy Department and Environmental Protection Agency Release...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Environmental Protection Agency Release Fuel Economy Tool for Used Vehicles Energy Department and Environmental Protection Agency Release Fuel Economy Tool for Used Vehicles...

332

VEMAP Data Release, Dec. 13, 2000  

NLE Websites -- All DOE Office Websites (Extended Search)

Data Release, Dec. 13 The ORNL DAAC announces the release of data from the VegetationEcosystem Modeling and Analysis Project (VEMAP). VEMAP is an international project studying...

333

EIA - Annual Energy Outlook 2011 Early Release  

Annual Energy Outlook 2012 (EIA)

1 Release Date: July 8, 2011 | Next Release Date: June 2012 | Report Number: DOEEIA-0554(2011) Introduction This report presents the major assumptions of the National Energy...

334

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases The World's Largest Radar Laboratory New suite of scanning radars document life and death of clouds For Immediate Release: Thursday, December 8, 2011 Deployed in...

335

EIA - Annual Energy Outlook 2013 Early Release  

U.S. Energy Information Administration (EIA)

Release Date: December 5, 2012 | Report Release Schedule: April 15 - May 2, 2013 | Report Number: DOE/EIA-0383ER(2013)

336

Information Release Notice - Energy Information Administration  

U.S. Energy Information Administration (EIA)

The test file will be automatically delivered to you when it is released at the scheduled test release times listed below.

337

News Releases | Advanced Materials | ORNL  

NLE Websites -- All DOE Office Websites (Extended Search)

News & Awards News & Awards News Releases Honors & Awards News Features Advanced Materials Home | Science & Discovery | Advanced Materials | News & Awards | News Releases News Releases 1-7 of 7 Results ORNL devises recipe to fine-tune diameter of silica rods December 16, 2013 - OAK RIDGE, Tenn., Dec. 16, 2013 - By controlling the temperature of silica rods as they grow, researchers at the Department of Energy's Oak Ridge National Laboratory could be setting the stage for advances in anti-reflective solar cells, computer monitors, TV screens, eye glasses and more. ORNL's Bruce Pint elected 2014 NACE fellow December 13, 2013 - OAK RIDGE, Tenn., Dec. 13, 2013 - Bruce Pint, a research staff member at the Department of Energy's Oak Ridge National Laboratory, has been elected a 2014 National Association of Corrosion

338

Five LBA Data Sets Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Use-Land Change Data Sets Released Use-Land Change Data Sets Released The ORNL DAAC and the LBA DIS announce the release of three data sets from the Land Use-Land Change teams, components of the LBA-ECO Large Scale Biosphere-Atmosphere Experiment in Amazonia (LBA). LBA-ECO LC-09 Land Cover Transitions Maps for Study Sites in Para, Brazil: 1970-2001 . Data set prepared by E.S. Brondizio and E.F. Moran. This data set includes classified land cover transition maps at 30-m resolution derived from Landsat TM, MSS, ETM+ imagery and aerial photos of Altamira, Santarem, and Ponta de Pedras, in the state of Para, Brazil. The Landsat images were classified into several types of land use and subjected to change detection analysis to create transition matrices of land cover change. LBA-ECO LC-22 Post-deforestation Land Use, Mato Grosso, Brazil:

339

SAFARI 2000 Data Set Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Set Released Set Released The ORNL DAAC announces the release of the data set "SAFARI 2000 MISR Level 2 Data, Southern Africa, Dry Season 2000". This data set is a product of the Southern African Regional Science Initiative containing 240 HDF-EOS formatted MISR Level 2 Top-of-Atmosphere/Cloud and Aerosol/Surface Products focused in a southern African study area which includes: Botswana, Lesotho, Malawi, Mozambique, Namibia, South Africa, Swaziland, Zambia, and Zimbabwe. The MISR Level 2 Products are geophysical measurements derived from the Level 1B2 data which consists of parameters that have been geometrically corrected and projected to a standard map grid. The products are in swaths, each derived from a single MISR orbit, where the imagery is 360 km wide and

340

Two Ecosystem Demography Models Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Ecosystem Demography Models Released Ecosystem Demography Models Released The ORNL DAAC is pleased to announce the release of two Ecosystem Demography Models: Ecosystem Demography Model: U.S. Ecosystem Carbon Stocks and Fluxes, 1700-1990 . Data set prepared by G. Hurtt, S.W. Pacala, P.R. Moorcroft, J. Caspersen, E. Shevliakova, R.A. Houghton, B. Moore III, and J. Fisk. This model product contains the source code for the Ecosystem Demography Model (ED version 1.0) as well as model input and output data files for the conterminous United States. The ED is a mechanistic ecosystem model built around established sub-models of leaf level physiology, organic matter decomposition, hydrology, and functional biodiversity. It was used herein to estimate ecosystem carbon stocks and fluxes in the conterminous U.S. at

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

ORNL DAAC: Amazon Data Release  

NLE Websites -- All DOE Office Websites (Extended Search)

Amazon Data Released Amazon Data Released The ORNL DAAC announces the release of a data set associated with the LBA-ECO component of the Large-Scale Biosphere-Atmosphere Experiment in Amazonia (LBA). The data set "LBA-ECO CD-07 GOES-8 L3 Gridded Surface Radiation and Rain Rate for Amazonia: 1999" contains surface down-welling solar radiation, photosynthetically active radiation (PAR) and infrared radiation, as well as precipitation rates for the LBA study area at 8x8-km and half-hourly resolutions. The data cover the time periods March 1, 1999 - April 30, 1999, and September 1, 1999 - October 31, 1999. LBA is an international research initiative under the leadership of Brazil. The project focuses on the climatological, ecological, biogeochemical, and hydrological functions of Amazonia; the impact of land use change on these

342

Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.  

Science Conference Proceedings (OSTI)

Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

Beck, David Franklin

2011-01-01T23:59:59.000Z

343

A hybrid approach to outlier detection in the offset lithographic printing process  

Science Conference Proceedings (OSTI)

Artificial neural networks are used to model the offset printing process aiming to develop tools for on-line ink feed control. Inherent in the modelling data are outliers owing to sensor faults, measurement errors and impurity of materials used. It is ... Keywords: Fuzzy expert, Leverages, Neural network, Outlier detection

C. Englund; A. Verikas

2005-09-01T23:59:59.000Z

344

Segmentation of historical machine-printed documents using Adaptive Run Length Smoothing and skeleton segmentation paths  

E-Print Network (OSTI)

of the valuable historical collections. In order to achieve accu- rate recognition results, a robust and efficientSegmentation of historical machine-printed documents using Adaptive Run Length Smoothing Stamatopoulos b , Nikos Papamarkos a a Department of Electrical and Computer Engineering, Democritus University

Gatos, Basilios

345

Mar 24th 2011 | from the print edition 0 40Like Battery technology  

E-Print Network (OSTI)

Mar 24th 2011 | from the print edition 0 40Like Battery technology Highly charged A powerful experimental battery that can be recharged completely in minutes ENGINEERS have long dreamed of shortening the time it takes to recharge batteries. Currently, that can be hours. For applications like motor vehicles

Braun, Paul

346

Graphene Transistors Fabricated via Transfer-Printing In Device Active-Areas  

E-Print Network (OSTI)

growth.5 However, to use graphene as the material for integrated circuits we need high-quality graphene. wafers. This paper reports a demonstration of a different approach to achieve high-quality graphene- printing (DCT), does not intend to put high-quality graphene everywhere on a large substrate but rather

347

Anaerobic Baffled Reactor (ABR) for Alkali-minimization Dyeing-printing Wastewater Biodegradation  

Science Conference Proceedings (OSTI)

The performance of the laboratory scale anaerobic baffled reactor (ABR) was investigated by the use of granular sludge to treat alkali-minimization and dyeing-printing wastewater (ADW-water). The experiment showed that the start-up of reactor was completed ... Keywords: ABR, ADW-water, Granular sludge, UV254, VFA

Qijun Zhong; Bo Yang

2012-05-01T23:59:59.000Z

348

J . Fluid Mech. (1989),vol. 207, p p . 133-152 Printed in Great Britain  

E-Print Network (OSTI)

with a fixed randomly generated velocity field. At infinite resolution, the modified dynamics with energyJ . Fluid Mech. (1989),vol. 207, p p . 133-152 Printed in Great Britain 133 Extremal energy) Certain modifications of the Euler equations of fluid motion lead to systems in which the energy decays

Vallis, Geoff

349

J . Fluid Mech. (1980),vol. 100, part 4, pp. 705-737 Printed in &eat Britain  

E-Print Network (OSTI)

J . Fluid Mech. (1980),vol. 100, part 4, pp. 705-737 Printed in &eat Britain 706 Vortex dynamics, and if they equilibrate between mergings, conservation of energy and angular momentum #12;Vortex dynamics of the turbulent, with vortices of one generation merging to form the larger vortices of the next generation. The reader

Siggia, Eric

350

A simple and versatile micro contact printing method for generating carbon nanotubes patterns on various substrates  

Science Conference Proceedings (OSTI)

We present an optimized process for generating at low cost, patterns of carbon nanotubes (CNTs) on a large variety of substrates through a simple micro contact printing method. This method meets the requirements for the integration of CNTs into microdevices, ... Keywords: Carbon nanotubes, Flexible electronics, Micro-patterning, Soft-lithography, Spray-coating

A. BéDuer; F. Seichepine; E. Flahaut; C. Vieu

2012-09-01T23:59:59.000Z

351

Instructions for setting up a "Print to FILE" printer Windows 2000/ME/XP  

E-Print Network (OSTI)

Instructions for setting up a "Print to FILE" printer Windows 2000/ME/XP Select "Start -> Printers "Next" On the "Install Printer Software screen", select "Generic" in the left window (Manufacturer) and "Generic / Text Only" in the right window (Printers), then click "Next". On the "Name Your Printer" screen

DeSante, David F.

352

Biomass and &nergy Vol. 3, No. 5, pp. 301-307, 1992 Printed in Great Britain  

E-Print Network (OSTI)

Biomass and &nergy Vol. 3, No. 5, pp. 301-307, 1992 Printed in Great Britain 0961-9534/92 $5.00 + 0 saccharification and fermentation (SSF) process is a favored option for conversion of the lignocellulosic biomass biomass, ethanol, woody crops, herbaceous crops, agricultural residues. 1. INTRODUCIION Although ethanol

California at Riverside, University of

353

A Comparative Study between Decision Fusion and Data Fusion in Markovian Printed Character Recognition  

Science Conference Proceedings (OSTI)

A comparison is made between several Hidden Markov Models in the context of printed character recognition. Two HMMs are first compared, one dealing with columns of a character image, the other dealing with lines. These 2 HMMs are then associated in a ...

Khalid Hallouli; Laurence Likforman-Sulem; Marc Sigelle

2002-08-01T23:59:59.000Z

354

EM Recovery Act Press Releases  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

press-releases Office of Environmental press-releases Office of Environmental Management 1000 Independence Ave., SW Washington, DC 20585 202-586-7709 en Idaho Site Completes Demolition of Cold War-era Nuclear Fuel Reprocessing Facility http://energy.gov/em/articles/idaho-site-completes-demolition-cold-war-era-nuclear-fuel-reprocessing Idaho Site Completes Demolition of Cold War-era Nuclear Fuel Reprocessing Facility

355

19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 QUANTUM EFFICIENCY OF CdTe SOLAR CELLS IN FORWARD BIAS  

E-Print Network (OSTI)

19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 QUANTUM EFFICIENCY OF Cd;19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 Figure 2 shows the numerical as #12;19th European Photovoltaic Solar Energy Conference Pre-Print 4AV.1.45 CE V( )= J V,100%( )- J V

Sites, James R.

356

Emerging Technologies in the Built Environment: Geographic Information Science (GIS), 3D Printing, and Additive Manufacturing  

SciTech Connect

Abstract 1: Geographic information systems emerged as a computer application in the late 1960s, led in part by projects at ORNL. The concept of a GIS has shifted through time in response to new applications and new technologies, and is now part of a much larger world of geospatial technology. This presentation discusses the relationship of GIS and estimating hourly and seasonal energy consumption profiles in the building sector at spatial scales down to the individual parcel. The method combines annual building energy simulations for city-specific prototypical buildings and commonly available geospatial data in a GIS framework. Abstract 2: This presentation focuses on 3D printing technologies and how they have rapidly evolved over the past couple of years. At a basic level, 3D printing produces physical models quickly and easily from 3D CAD, BIM (Building Information Models), and other digital data. Many AEC firms have adopted 3D printing as part of commercial building design development and project delivery. This presentation includes an overview of 3D printing, discusses its current use in building design, and talks about its future in relation to the HVAC industry. Abstract 3: This presentation discusses additive manufacturing and how it is revolutionizing the design of commercial and residential facilities. Additive manufacturing utilizes a broad range of direct manufacturing technologies, including electron beam melting, ultrasonic, extrusion, and laser metal deposition for rapid prototyping. While there is some overlap with the 3D printing talk, this presentation focuses on the materials aspect of additive manufacturing and also some of the more advanced technologies involved with rapid prototyping. These technologies include design of carbon fiber composites, lightweight metals processing, transient field processing, and more.

New, Joshua Ryan [ORNL

2014-01-01T23:59:59.000Z

357

Planning and Facilitating Release Retrospectives  

Science Conference Proceedings (OSTI)

One of the fundamental principles in Agile methods is to have feedback loops so that the team and organization can be learning and improving their approach to accomplishing goals. As a Scrum Master, I found lots of resources on short feedback loops from ... Keywords: Retrospective, Release, Agile

Michael Maham

2008-08-01T23:59:59.000Z

358

released  

NLE Websites -- All DOE Office Websites (Extended Search)

Arctic Arctic algae, a cereal crop whose genetic code is nearly equivalent to sequencing two full human genomes, and microbial communities in deep- sea hydrothermal vents are among the 35 projects selected by the U.S. Department of Energy (DOE) Joint Genome Institute (JGI) for its 2011 Community Sequencing Program (CSP) to be character- ized for bioenergy and environ- mental applications. Enabling scientists from universities and national labo- ratories around the world to probe the hidden world of microbes and plants to meet the DOE missions of bioenergy, carbon cycling and biogeo- chemistry, this year's CSP portfolio is composed mostly of large-scale projects, which DOE JGI Director Eddy Rubin said was in keeping with the facility's mission of large-scale genomics and analysis. "Advances in sequencing technologies are really chang- ing the landscape and have dramatically

359

NETL: News Release - DOE Announces Release of Second Carbon Sequestration  

NLE Websites -- All DOE Office Websites (Extended Search)

November 17, 2008 November 17, 2008 DOE Announces Release of Second Carbon Sequestration Atlas New Version Provides Additional Information on Carbon Dioxide Storage 2008 Carbon Sequestration Atlas II WASHINGTON, D. C.- The U.S. Department of Energy (DOE) today announced the release of its second Carbon Sequestration Atlas of the United States and Canada, which documents more than 3,500 billion metric tons of carbon dioxide (CO2) storage potential in oil and gas reservoirs, coal seams, and saline formations. Preliminary estimates suggest the availability of more than 1,100 years of CO2 storage for the United States and Canada in these geologic formations. "In the year since it was first published, the carbon sequestration atlas has proven to be an invaluable tool to the entire sequestration community," said Acting Assistant Secretary for Fossil Energy James Slutz. "The second edition will bolster our efforts to find environmentally sound, cost-effective methods to sequester carbon dioxide."

360

NETL: News Release -Treasury, Energy Departments Release New Advanced Coal  

NLE Websites -- All DOE Office Websites (Extended Search)

7, 2007 7, 2007 Treasury, Energy Departments Release New Advanced Coal Project Tax Credit Applications for 2007-2008 WASHINGTON, DC - The Treasury Department and the Department of Energy (DOE) released today new instructions for applying for the tax credits for advanced coal projects and gasification projects. The new instructions provide additional time to submit applications for the credits. For the 2007-2008 allocation round, applications for DOE certification are not due to the Energy Department until October 31, 2007. "To further advance our nation's energy security, this Administration had made sustained investments in research, development, and wider use of advanced coal technologies a priority," Deputy Secretary of Energy Clay Sell said. "Through new and innovative programs such as the Clean Coal Power Initiative and FutureGen demonstration, private sector partnerships, and use of tax credits and loan guarantees, the Department of Energy is advancing research to further develop and deploy advanced coal technologies to meet growing energy demand."

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

NETL: News Release - DOE Releases Draft Funding Opportunity Announcement  

NLE Websites -- All DOE Office Websites (Extended Search)

October 4, 2007 October 4, 2007 DOE Releases Draft Funding Opportunity Announcement for CCPI Round 3 Washington, DC - The U.S. Department of Energy has released for public comment the draft Funding Opportunity Announcement (FOA), Model Cooperative Agreement, and Model Payment Agreement for Round 3 of the Clean Coal Power Initiative (CCPI). CCPI invites private industries to partner with Government to demonstrate new clean coal technologies at commercial scale. MORE INFO Read the Draft FOA Register for the Public Workshop [beginning 10.05.07] The draft FOA allows interested parties to voice concerns and seek answers to questions regarding the cost-shared partnership. The public comment period begins immediately and continues through November 9, 2007. In addition, a public meeting will be held on November 1, 2007, at the Hyatt

362

EIA - Annual Energy Outlook 2013 Early Release  

Gasoline and Diesel Fuel Update (EIA)

AEO2013 Early Release Overview AEO2013 Early Release Overview Release Date: December 5, 2012 | Report Release Schedule: April 15 - May 2, 2013 | Report Number: DOE/EIA-0383ER(2013) This release is an abridged version of the Annual Energy Outlook that highlights changes in the AEO Reference case projections for key energy topics. The Early Release includes data tables for the Reference case only. The AEO2013 will be released between April 15 and May 2. See release schedule. . Download the AEO2013 Early Release Report Introduction In preparing the AEO2013 Reference case, the U.S. Energy Information Administration (EIA) evaluated a wide range of trends and issues that could have major implications for U.S. energy markets. This overview presents the AEO2013 Reference case and compares it with the AEO2012 Reference case

363

NIST Releases Successor to Venerable Handbook of Math ...  

Science Conference Proceedings (OSTI)

NIST Releases Successor to Venerable Handbook of Math Functions. For Immediate Release: May 11, 2010. ...

2010-10-05T23:59:59.000Z

364

Physical-Layer Modeling of UWB Interference Effects  

Science Conference Proceedings (OSTI)

Page 1. Contract MDA972-02-C-0056 NETEX UWB Interference Effects Approved for Public Release, Distribution Unlimited ...

2009-02-03T23:59:59.000Z

365

4. TITLE AND SUBTITLE: 5. FUNDING NUMBERS SECURE INTEGRATION OF RADIO FREQUENCY IDENTIFICATION  

E-Print Network (OSTI)

Approved for public release; distribution is unlimitedTHIS PAGE INTENTIONALLY LEFT BLANKREPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-

Barry A. Craft; J. D. Fulp

2005-01-01T23:59:59.000Z

366

NREL: News - Release Archives 2009  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Printable Version News Release Archives 2009 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 23, 2009 New NREL Web Site Helps Campuses Go Green The U.S. Department of Energy's National Renewable Energy Laboratory and Cornell University have launched a Web site to help campus-based institutions develop clean energy and carbon-reduction strategies. December 22, 2009 NREL Evaluates UPS Hybrid-Electric Van Performance The U.S. Department of Energy's (DOE) National Renewable Energy Laboratory (NREL) has collected and analyzed fuel economy, maintenance and other

367

BOREAS Release, Oct. 15, 1999  

NLE Websites -- All DOE Office Websites (Extended Search)

Oct. 15 Oct. 15 Six new data sets from the Boreal Ecosystem-Atmosphere Study (BOREAS) were released by the ORNL DAAC on October 15, 1999. The release brings the total number to 186 data sets currently available. The newest data are related to hydrology, remote sensing, and background measurements (called "staff science"): BOREAS HYD-09 Hourly and Daily Radar Rainfall Maps for the Southern Study Area - Radar data that can be used to construct hourly and daily rainfall maps. BOREAS RSS-02 Extracted Reflectance Factors Derived from ASAS Imagery - Reflectance factors for small homogeneous areas around ground measurement sites, derived from remote sensing imagery. BOREAS Daedalus TMS Level-0 Imagery Digital Counts in BIL Format - Remotely sensed images showing radiant energy in the visible,

368

NREL: News - Release Archives 2008  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Printable Version News Release Archives 2008 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 11, 2008 Alternative Fuels and Advanced Vehicle Data Center Creates New Tool to Calculate Ways to Cut Gas Use A business owner with a fleet of 10 heavy-duty diesel trucks wants to cut diesel use by 10 percent. Would using a biodiesel blend or investing in onboard power sources that reduce engine idling achieve the biggest drop in petroleum use? An average driver, using 600 gallons of gas a year in a typical sedan, wants to reduce gas consumption by 20 percent. Would using

369

National Atmospheric Release Advisory Center  

NLE Websites -- All DOE Office Websites (Extended Search)

NARAC TOC NARAC TOC The National Atmospheric Release Advisory Center, NARAC, provides tools and services to the Federal Government, that map the probable spread of hazardous material accidentally or intentionally released into the atmosphere. NARAC provides atmospheric plume predictions in time for an emergency manager to decide if taking protective action is necessary to protect the health and safety of people in affected areas. Located at the Lawrence Livermore National Laboratory, NARAC is a national support and resource center for planning, real-time assessment, emergency response, and detailed studies of incidents involving a wide variety of hazards, including nuclear, radiological, chemical, biological, and natural emissions. In an emergency situation (if lives are at risk), event-specific NARAC

370

AEO2010 Early Release Overview  

Gasoline and Diesel Fuel Update (EIA)

10 10 Early Release Overview December 2009 Energy Trends to 2035 In preparing the Annual Energy Outlook 2010 (AEO- 2010), the Energy Information Administration (EIA) evaluated a wide range of trends and issues that could have major implications for U.S. energy markets. This overview focuses primarily on one case, the AEO2010 reference case, which is presented and com- pared with the updated Annual Energy Outlook 2009 (updated AEO2009) reference case released in April 2009 1 (see Table 1). Because of the uncertainties in- herent in any energy market projection, particularly in periods of high price volatility, rapid market trans- formation, or active changes in legislation, the refer- ence case results should not be viewed in isolation. Readers are encouraged to review the alternative cases when the complete AEO2010 publication is re- leased in order to gain perspective on how variations

371

SANDIA REPORT  

Office of Scientific and Technical Information (OSTI)

2-2137 * U 2-2137 * U C - 7 0 5 Unlimited Release Printed September 1994 EXODUS II: A Finite Element Data Model Larry A. Schoof, Victor R. Yarberry Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and LIvermore, California 94550 for the United States Department of Energy under Contract DE-AC04-94AL85000 Approved for public release, distribution is unlimited 0Jff*BUT»0» Or THIS DOCUMFW IS UNLIRIITrp Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Govern- ment nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express

372

Microsoft Word - 2008 ASER Final 4_30_09.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

9-2525 9-2525 Unclassified Unlimited Release Printed May 2009 Site Environmental Report for 2008 Sandia National Laboratories, California B.L. Larsen Prepared by Sandia National Laboratories Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Sandia National Laboratories, California Site Environmental Report for 2008 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States

373

Solar Thermochemical Hydrogen Production Research (STCH): Thermochemical Cycle Selection and Investment Priority  

NLE Websites -- All DOE Office Websites (Extended Search)

1-3622 1-3622 Unlimited Release Printed May 2011 Solar Thermochemical Hydrogen Production Research (STCH) Thermochemical Cycle Selection and Investment Priority Robert Perret Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the

374

Microsoft Word - Cyber Effects Analysis Using VCSE 09.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8-5954 8-5954 Unlimited Release Printed September 2008 Cyber Effects Analysis Using VCSE Promoting Control System Reliability Michael J. McDonald, Gregory N. Conrad, Travis C. Service, Regis H. Cassidy Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of

375

Final Report for the DOE Metal Hydride Center of Excellence  

NLE Websites -- All DOE Office Websites (Extended Search)

SANDIA REPORT SANDIA REPORT SAND2012-0786 Unlimited Release Printed February 2012 Final Report for the DOE Metal Hydride Center of Excellence Lennie Klebanoff Director, Metal Hydride Center of Excellence Jay Keller Deputy Director, Metal Hydride Center of Excellence Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy

376

Microsoft Word - 2006 ASER Final.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

7-2654 7-2654 Unclassified Unlimited Release Printed June 2007 Site Environmental Report for 2006 Sandia National Laboratories, California B.L. Larsen Prepared by Sandia National Laboratories Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. SNL/CA Site Environmental Report for 2006 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States

377

Microsoft Word - OPSAID-NSTB-report-NOV07-final-v1.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANDIA REPORT SANDIA REPORT SAND2007-7552 Unlimited Release Printed November 2007 OPSAID Initial Design and Testing Report Steven A. Hurd, Jason E. Stamp, and Adrian R. Chavez Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. OPSAID Initial Design and Testing Report 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of

378

SANDIA REPORT  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

REPORT REPORT SAND2008-6098 Unlimited Release Printed August 2008 National SCADA Test Bed Consequence Modeling Tool Bryan T. Richardson and Lozanne Chavez Prepared by: Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor

379

TTR- KTF ASER Cover 2007.indd  

NLE Websites -- All DOE Office Websites (Extended Search)

70P 70P Unlimited Release Printed September 2008 Calendar Year 2007 Annual Site Environmental Report for Tonopah Test Range, Nevada and Kauai Test Facility, Hawaii Rebecca Sanchez, Karen Agogino, Susan Koss, Eleni Otto, and Jacqueline Orozco Snow Egret on one of the lake beds at TTR Photo by: Steve Cox Green Sea Turtle off Coast of Kauai. Photo by Adriana Canavan Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94Al85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation.

380

Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes  

NLE Websites -- All DOE Office Websites (Extended Search)

SAND2011-3119 SAND2011-3119 Unlimited Release Printed May 2011 Proton Exchange Membrane Fuel Cells for Electrical Power Generation On-Board Commercial Airplanes Joseph W. Pratt, Leonard E. Klebanoff, Karina Munoz-Ramos, Abbas A. Akhil, Dita B. Curgus, and Benjamin L. Schenkman Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE -AC04-94AL85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility  

NLE Websites -- All DOE Office Websites (Extended Search)

3-0501 3-0501 Unlimited Release Printed February 2013 Vessel Cold-Ironing Using a Barge Mounted PEM Fuel Cell: Project Scoping and Feasibility Joseph W. Pratt and Aaron P. Harris Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the

382

Microsoft Word - 2007 ASER Final 5_23_08.doc  

NLE Websites -- All DOE Office Websites (Extended Search)

8-2653 8-2653 Unclassified Unlimited Release Printed June 2008 Site Environmental Report for 2007 Sandia National Laboratories, California B.L. Larsen Prepared by Sandia National Laboratories Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Sandia National Laboratories, California Site Environmental Report for 2007 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States

383

Microsoft Word - Data Classification Security Framework V5.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

888P 888P Unlimited Release Printed July 2007 Security Framework for Control System Data Classification and Protection Bryan T. Richardson and John Michalski Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Security Framework for Control System Data Classification and Protection 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of

384

Abstract  

Office of Scientific and Technical Information (OSTI)

SAND2007-2331 SAND2007-2331 Unlimited Release Printed April 2007 Autothermal Reforming of Natural Gas to Synthesis Gas Reference: KBR Paper #2031 Steven F. Rice and David P. Mann Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United

385

Microsoft Word - Secure ICCP Implementation Rpt SAND format V5.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

345 345 Unlimited Release Printed June 2007 Secure ICCP Integration Considerations and Recommendations John T. Michalski, Andrew Lanzone, Jason Trent, and Sammy Smith Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under Contract DE-AC04-94AL85000. Approved for public release; further dissemination unlimited. Secure ICCP Integration Considerations and Recommendations 2 Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the

386

E-print Network Alerts Help -- Energy, science, and technology for the  

Office of Scientific and Technical Information (OSTI)

Alerts Help Alerts Help Alerts will make your recurring searches even easier by automating your search and sending you the results on a regular basis. To receive alerts on your topic(s) of interest, simply create an Alerts account, specify your alert parameters and check your email. For additional information, please choose from one of the below help topics. Alerts Help Topics: Creating an Alerts account Alerts Homepage Create an alert Creating an alert from your search Receiving alerts Viewing alerts Selecting printing, emailing, and exporting alerts Storing alerts Modifying alerts Deleting an alert Alerts Search Tips E-print Network Alerts Fast Facts You can easily create an alert right from the results page. Alerts run automatically, based on the schedule you choose. New relevantly ranked results are automatically sent to you through

387

E-print Network Architecture -- Energy, science, and technology for the  

Office of Scientific and Technical Information (OSTI)

Architecture: What is under the Hood Architecture: What is under the Hood E-print Network allows the information patron to search multiple data sources with a single query from the user interface. While the user gets a seamless, Google-like search and retrieval experience, sophisticated Web technology is used behind the scenes. Such sophistication is necessitated by the fact that different researchers and research organizations use different mechanisms to publish e-prints. The publication mechanisms fall into one of two general categories. First, "papers" and articles can be published in databases or portals. Typically, such databases and portals have their own search engine, and they are often not readily crawled and indexed. Alternatively, "papers" and articles can be published as simple

388

About the E-print Network -- Energy, science, and technology for the  

Office of Scientific and Technical Information (OSTI)

About About General Information E-prints are scholarly and professional works electronically produced and shared by researchers with the intent of communicating research findings to colleagues. They may include preprints, reprints, technical reports, conference publications or other means of electronic communication. Preprints, those selectively shared pre-published documents or articles going through the publication process, have long been recognized and utilized by peer groups throughout the scientific community. Recent technological advances, however, have incorporated preprints with other forms of peer communications to establish an information genre in its own right. Therefore, the more inclusive term e-prints is more appropriate to use currently in describing this rich and valuable source of scientific and

389

Install the E-print Network toolbar -- Energy, science, and technology for  

Office of Scientific and Technical Information (OSTI)

Browser Toolbar The E-print Network offers a browser toolbar for easy access to e-print searches and discipline pages. EPN browser toolbar Two installation options are available for the EPN browser toolbar: Internet Explorer - Download and install the toolbar using the Softomate ActiveX Web installer Please select "Install ActiveX Control" when prompted by your browser. Install toolbar for Internet Explorer Can't see the toolbar after installing? Note: Browser security settings at some organizations may prevent installation or use of the toolbar in Internet Explorer. Try installing the toolbar in the FireFox browser, using the button below. Minimum System Requirements: Windows XP/Vista Internet Explorer 6 or Firefox 2 FireFox - Install toolbar for FireFox

390

Browse by Discipline -- Subject Pathways for the E-print Network -- Energy,  

Office of Scientific and Technical Information (OSTI)

Browse by Discipline These pages contain links to thousands of servers, sites, and documents contributed by individual authors that contain e-print information in discipline areas of interest to the Department of Energy's research activities. These resources are organized into discipline-specific categories as indicated below. To view these resources and sites, simply select a discipline, browse the entries listed in alphabetical order, and click on any entry to leave the discipline you selected and enter a specific website. Use the "Back" button to return to the E-print Discipline you exited from. Biology and Medicine Biotechnology Computer Technologies and Information Sciences Chemistry Energy Storage, Conversion and Utilization Engineering Environmental Management and Restoration Technologies

391

J . Fluid Mech. (1978),vol. 86, part 3, pp. 567-592 Printed in Oreat Britain  

E-Print Network (OSTI)

-dimensional turbulence 575 k (cm-') FIGURE5. Energy spectra generated by the linear forcing defined in (2.3)with R = 0.4s J . Fluid Mech. 41,453. FRISCH,U., SULEM,P. L. & NELKIN,M. 1978 A simple dynamical modelJ . Fluid Mech. (1978),vol. 86, part 3, pp. 567-592 Printed in Oreat Britain 567 Intermittency

Siggia, Eric

392

3D Printing: High-impact Emerging Technology - What You Need to Know Definitions, Adoptions, Impact, Benefits, Maturity, Vendors  

Science Conference Proceedings (OSTI)

3D printing is a form of additive manufacturing technology where a three dimensional object is created by laying down successive layers of material. 3D printers are generally faster, more affordable and easier to use than other additive manufacturing ...

Kevin Roebuck

2011-05-01T23:59:59.000Z

393

Design and development of an automated three axis machine that prints images on top of the foam of certain beverages  

E-Print Network (OSTI)

The goal of this research was to design and develop a working alpha prototype of the flagship product for a local startup called Onlatte, Inc. OnLatte specializes in automated printing of images on top of the foam of ...

Richardson, Jeremy S. H

2009-01-01T23:59:59.000Z

394

Achieving Six Sigma printed circuit board yields by improving incoming component quality and using a PCBA prioritization algorithm  

E-Print Network (OSTI)

Printed circuit board assemblies (PCBAs) are the backbone of the electronics industry. PCBA technologies are keeping pace with Moore's Law and will soon enable the convergence of video, voice, data, and mobility onto a ...

Davis, Daniel Jacob

2008-01-01T23:59:59.000Z

395

E-print Network Web Log News: Research Communications for Scientists and  

Office of Scientific and Technical Information (OSTI)

Archive Archive Search Archive August 11, 2006 WeÂ’ve had a number of inquiries about how to best search our E-prints on Web-sites feature for individual authors. HereÂ’s what you do. First be sure that the E-prints on Web sites box is checked then go down to the Creator/Author search box and enter the researcherÂ’s last name followed by the first name but use no punctuation between the names. For instance if you were looking for John Brown you would enter in the Creator/Author Box Brown John Then start the search by clicking black search button near the bottom of the page. Please note that the author searching in the E-prints on Web-sites works only for authors who have provided eprints on their web sites. This means that searching for any other author will not return useful results. Also you should find that when multiple authors provide the same eprint, searching for any of the providing authors will retrieve the paper.

396

Review and Understanding of Screen-Printed Contacts and Selective-Emitter Formation: Preprint  

DOE Green Energy (OSTI)

A comparison of the loss mechanisms in screen-printed solar cells relative to buried contact cells and cells with photolithography-defined contacts is presented in this paper. Model calculations show that emitter recombination accounts for about 0.5% absolute efficiency loss in conventional screen-printed cells with low-sheet-resistance emitters. Ohmic contact to high-sheet-resistance emitters by screen-printing has been investigated to regain this efficiency loss. Our work shows that good quality ohmic contacts to high sheet-resistance emitters can be achieved if the glass frit chemistry and Ag particle size are carefully tailored. The melting characteristics of the glass frit determine the firing scheme suitable for low contact resistance and high fill factors. In addition, small to regular Ag particles were found to help achieve a higher open-circuit voltage and maintain a low contact resistance. This work has resulted in cells with high fill factors (0.782) on high sheet-resistance emitters and efficiencies of 17.4% on planar float zone Si substrates, without the need for a selective emitter.

Hilali, M. M.; Rohatgi, A.; To, B.

2004-08-01T23:59:59.000Z

397

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Stories and Releases Taking the Heat in the U.S. Great Plains When the National Weather Service released their predictions for the summer of 2013, it was difficult to miss...

398

BigFoot Data Set Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Meteorological Data Set Released The ORNL DAAC is pleased to announce the release of a data set associated with The BigFoot project: BIGFOOT Meteorological Data for North and South...

399

EIA - Annual Energy Outlook 2014 Early Release  

U.S. Energy Information Administration (EIA) Indexed Site

AEO2014 Early Release Overview AEO2014 Early Release Overview Release Date: December 16, 2013 | Full Report Release Date: Early Spring 2014 | correction | Report Number: DOE/EIA-0383ER(2014) This release is an abridged version of the Annual Energy Outlook that highlights changes in the AEO Reference case projections for key energy topics. The Early Release includes data tables for the Reference case only. The AEO2014 full version will be released early Spring 2014. Download the AEO2014 Early Release Report Introduction In preparing the AEO2014 Reference case, the U.S. Energy Information Administration (EIA) evaluated a wide range of trends and issues that could have major implications for U.S. energy markets. This overview presents the AEO2014 Reference case and compares it with the AEO2013 Reference case

400

NERSC Releases Mobile Apps to Users  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases Mobile Apps to Users NERSC Releases Mobile Apps to Users Job Status, MOTD and Pilot of VASP Submission Available with More to Come April 23, 2012 In an effort to make...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Estimating Contaminant Release Concentrations from Hanford ...  

& Transport Model Long-Term Performance Assessment ... sludge provide upper limit on future releases. 9 Metals Concentrations in Hanford Tank ...

402

Lawrence Livermore National Laboratory (LLNL): News Releases...  

NLE Websites -- All DOE Office Websites (Extended Search)

Trek: Into Darkness" (5162013) Renewable energy demonstration project (5142013) LLNL announces voluntary separation program (582013) RFI released for Livermore Valley...

403

CHANGING RELEASE CRITERIA FROM PAST TO PRESENT  

SciTech Connect

Beginning with the decommissioning of nuclear power plants the release, criteria for radioactive materials has gained importance significantly. After decommissioning and dismantling, most of the residues need not be treated as radioactive waste, since they contain only small amounts of radioactivity. The Karlsruhe Research Center already dismantled two research reactors completely (the Karlstein Super Heated Steam Reactor and the Niederaichbach Nuclear Power Plant), while several additional decommissioning projects are currently in progress. About 70 % of the total waste mass within each project can be released from the area of atomic regulations and licenses. At the Niederaichbach and Karlstein sites the release procedures and the release criteria were determined in the decommissioning license, where issues such as controlling and release values were fixed. Additionally, each step of the release process has to be coordinated with the regulator. Today the general release criteria are contained in the atomic act. Depending on the nature of the material to be released (e.g. building structures or metallic waste), and depending on the further use of the material, such as unrestricted reuse or waste disposal, release values for each nuclide are established. To prepare the release of materials, a release plan including the release measurement results is sent to the regulator, who has to officially approve the concept.

Graf, A.; Valencia, L.

2003-02-27T23:59:59.000Z

404

NREL: News - Release Archives 2004  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 21, 2004 NREL Recognizes Solar Pioneer with National Honor November 23, 2004 NREL Recognizes Solar Pioneer with National Honor November 17, 2004 Basalt Middle School Teacher Recognized for Renewable Energy Efforts October 5, 2004 NREL Theorist Recognized for Highest Citation Impact September 24, 2004 NREL Selects Contractor for New Science & Technology Facility August 26, 2004 NREL Praised for Efforts in Sustainable Pollution Prevention August 19, 2004 FLC Recognizes Laboratory's Technology Transfer Activities

405

NREL: News - NREL Releases Renewable Energy Data Book Detailing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Release NR-6113 NREL Releases Renewable Energy Data Book Detailing Growing Industry in 2012 November 21, 2013 The National Renewable Energy Laboratory (NREL) has released the 2012...

406

NREL: News - Release Archives 2007  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 4, 2007 Energy Lab Sets Aggressive Greenhouse Gas Reduction Goal The U.S. Department of Energy's National Renewable Energy Laboratory (NREL) has pledged to reduce its greenhouse gas emissions by 75 percent from 2005 to 2009. The new goal is part of NREL's participation in the Environmental Protection Agency's (EPA) Climate Leaders program. November 8, 2007 Wakonda Technologies is the Clean Energy Entrepreneur of the Year A small company commercializing a novel solar energy technology has been

407

NREL: News - Release Archives 2003  

NLE Websites -- All DOE Office Websites (Extended Search)

2003 2003 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 22, 2003 Renewable Energy a Smart Choice for Farmers and Ranchers December 10, 2003 Georgia Tech's Rohatgi Wins Second Annual Rappaport Award December 9, 2003 Acclaim for Three Leaders at Annual NREL Stakeholders Reception November 14, 2003 World Renewable Energy Congress Provides International Forum November 12, 2003 NREL and Company Researchers Team Up on Thin-Film Solar Cells October 30, 2003 NREL's Art Nozik Elected AAAS Fellow October 21, 2003 Workshop Tackles Biological Hydrogen Production

408

NREL: News - Release Archives 2006  

NLE Websites -- All DOE Office Websites (Extended Search)

6 6 News releases covering laboratory activities, scientific discoveries, projects and more are archived below, chronologically. For more information about NREL and its research in renewable energy and energy efficiency technologies, e-mail public_affairs@nrel.gov. December 14, 2006 Experimental "Wind to Hydrogen" System Up and Running Xcel Energy and the National Renewable Energy Laboratory unveiled a unique facility that uses electricity from wind turbines to produce and store pure hydrogen. November 28, 2006 University of Denver High School Teacher Recognized for Commitment to Renewable Energy Don Cameron, physics and astronomy teacher at the University of Denver High School (DUHS), earned this year's Renewable Energy Teacher Award from the U.S. Department of Energy's (DOE) National Renewable Energy Laboratory's

409

Nontoxic foul-release coatings  

SciTech Connect

The Electric Power Research Institute (EPRI) under project RP-1689-9 evaluated 30 non-toxic coatings for biofouling control on steel and concrete surfaces of cooling water intakes and piping. Seven coatings were evaluated at seven sites for 2 year. The remaining 23 coatings were exposed for a variety of time lengths at the Battelle Marine Laboratory at Daytona Beach, Florida. Accelerated corrosion tests and inspection of the test panels to determine coating life were also conducted. Results of several utility conducted tests were also solicited. Silicone-based coatings performed the best with predicted lives of 2 to 4 year. Although the non-toxic coatings can be fouled by biogrowth, the rate of fouling is less and the coating can be easily cleaned. A cost-benefit methodology is presented to aid utilities to assess the potential use of non-toxic foul-release coatings at power plant cooling systems. 12 refs., 16 figs., 35 tabs.

Not Available

1989-10-01T23:59:59.000Z

410

Biomediated continuous release phosphate fertilizer  

DOE Patents (OSTI)

A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed. 13 figs.

Goldstein, A.H.; Rogers, R.D.

1999-06-15T23:59:59.000Z

411

Biomediated continuous release phosphate fertilizer  

DOE Patents (OSTI)

A composition is disclosed for providing phosphate fertilizer to the root zone of plants. The composition comprises a microorganism capable of producing and secreting a solubilization agent, a carbon source for providing raw material for the microorganism to convert into the solubilization agent, and rock phosphate ore for providing a source of insoluble phosphate that is solubilized by the solubilization agent and released as soluble phosphate. The composition is provided in a physical form, such as a granule, that retains the microorganism, carbon source, and rock phosphate ore, but permits water and soluble phosphate to diffuse into the soil. A method of using the composition for providing phosphate fertilizer to plants is also disclosed.

Goldstein, Alan H. (Beverly Hills, CA); Rogers, Robert D. (Idaho Falls, ID)

1999-01-01T23:59:59.000Z

412

Print - TMS  

Science Conference Proceedings (OSTI)

Presented in conjunction with the Low Cost Titanium symposium ... medical implants and surgical instruments, oil and gas exploration, chemical processing,  ...

413

Print - TMS  

Science Conference Proceedings (OSTI)

Presenters, Michael Moats, Bill Davenport, Maurice Solar, Tim Robinson, Bruce ... the course will examine the fundamentals and current trends of the processing  ...

414

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Russian Russian The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Russian or related languages. Some may have minimal English content on the linking pages. Some of these societies may also provide electronic publications and/or information concerning scientific literature published in Russian or related languages. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Russian language societies. If you wish to view societies in another language, please select

415

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Japanese Japanese The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Japanese. Some may have minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in Japanese. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Japanese language societies. If you wish to view societies in another language, please select from the following options.

416

Fluid characterisation and drop impact in inkjet printing for organic semiconductor devices  

E-Print Network (OSTI)

elements provides a typical example. A hole-injection layer and a luminescent layer are formed between a cathode and a transparent indium tin oxide (ITO) anode coated on to a glass substrate. The two layers are deposited by regions of less wettable... -suited for integration with metal oxide dielectric layers, which could enable improved optical and electrical performance. Figure 2-12. Photograph of a 10,000 cd m-2 OLED printed using Ir-based polyhedral oligomeric silsesquioxane (POSS) macromolecules emitting at a...

Jung, Sungjune

2011-07-12T23:59:59.000Z

417

Model for TCLP Releases from Waste Glasses  

Science Conference Proceedings (OSTI)

A first-order property model for normalized Toxicity Characteristic Leaching Procedure (TCLP) release as a function of glass composition was developed using data collected from various studies. The normalized boron release is used to estimate the release of toxic elements based on the observation that the boron release represents the conservative release for those constituents of interest. The current TCLP model has two targeted application areas: (1) delisting of waste-glass product as radioactive (not mixed) waste and (2) designating the glass wastes generated from waste-glass research activities as hazardous or non-hazardous. This report describes the data collection and model development for TCLP releases and discusses the issues related to the application of the model.

Kim, Dong-Sang; Vienna, John D.

2003-05-01T23:59:59.000Z

418

Model for TCLP Releases from Waste Glasses  

Science Conference Proceedings (OSTI)

A first-order property model for normalized Toxicity Characteristic Leaching Procedure (TCLP) release as a function of glass composition was developed using collected data from various studies. The normalized boron release is used to estimate the release of toxic elements based on the observation that the boron release represents the conservative release for those constituents of interest. The current TCLP model has two targeted application areas: (1) delisting of waste-glass product as radioactive (not mixed) waste and (2) designating the glass wastes generated from waste-glass research activities as hazardous or non-hazardous. This report describes the data collection and model development for TCLP releases and discusses the issues related to the application of the model.

Kim, Dong-Sang; Vienna, John D.

2002-09-01T23:59:59.000Z

419

NETL: News Release - DOE Releases Feasibility Study for Conceptual  

NLE Websites -- All DOE Office Websites (Extended Search)

21 , 2007 21 , 2007 DOE Releases Feasibility Study for Conceptual Coal-to-Liquids Facility in Midwest Report Outlines the Path Toward Future Domestic Energy Facilities WASHINGTON, DC - The Office of Fossil Energy's National Energy Technology Laboratory has issued a report that examines the feasibility of a commercial 50,000 barrel per day coal-to-liquids (CTL) facility in the Illinois coal basin. The conceptual design study provides a performance baseline that can be used to show how CTL could capitalize on domestic energy resources while providing a much-needed bulwark against rising petroleum and natural gas prices. The price of coal-derived liquid fuels has traditionally been unable to compete with the price of fuels derived from crude oil. As oil prices continue to rise, however, domestic sources of transportation fuels are becoming more affordable. The economic and national security concerns related to non-domestic liquid fuels have more eyes turning to alternative sources of liquid fuels, and, with coal being America's most abundant energy resource, CTL facilities may provide a winning option.

420

SRP radioactive waste releases. Startup through 1959  

SciTech Connect

This report summarizes and documents radioactive waste released to the environs of the Savannah River Plant from startup through 1959. During this period, the quantity of beta-emitting radioisotopes released was determined by a total or ``gross`` analysis. However, advanced instrumentation and technology now permit an economical determination of most individual radionuclides. Therefore, future waste audit reports, beginning with January 1960, will record the quantity of specific radioisotopes released rather than gross amounts.

Ashley, C.

1960-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

GROA AIRBORNE RELEASE DISPERSION FACTOR CALCULATION  

Science Conference Proceedings (OSTI)

The purpose of this document is to calculate airborne release dispersion factors ({chi}/Q) for the surface and subsurface facilities at the Geological Repository Operations Area (GROA). The calculated {chi}/Q values may be used to estimate radiological consequences to workers for potential releases from normal operations and event sequences for License Application. The scope of this document is to provide estimates of {chi}/Q values at potential onsite receptors from facility releases, under normal operating conditions and event sequences.

J. Wang

2005-03-21T23:59:59.000Z

422

Ducks Unlimited Pledges to Help Save Coastal Louisiana ...  

U.S. Energy Information Administration (EIA)

Don Young at America's Energy Coast Press Conference in New Orleans, Louisiana. DU Executive Vice President Don Young speaks in favor of a Louisiana ...

423

NETL: IEP - Mercury Emissions Control: News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

News Releases The following are links to various recent news stories related to mercury in the environment. These links are provided strictly as a convenience to the general...

424

NIST Releases Updates to Digital Signature Standard  

Science Conference Proceedings (OSTI)

... The National Institute of Standards and Technology (NIST) has released a revision to the digital standard used to ensure the integrity of electronic ...

2013-07-25T23:59:59.000Z

425

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

9 Feature Stories and Releases Open House Draws Crowd to ARM Climate Research Facility Display Mild summer temperatures helped bring thousands of visitors through the gates of...

426

DOE National Laboratory Releases Annual Accomplishments Report...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Annual Accomplishments Report June 2, 2009 - 1:00pm Addthis Washington, DC - The National Energy Technology Laboratory (NETL) has released its annual accomplishments report,...

427

Dense gas dispersion modeling for aqueous releases.  

E-Print Network (OSTI)

??Production, transportation, and storage of hazardous chemicals represent potential risks to the environment, the public, and the producers themselves. The release to the atmosphere of… (more)

Lara, Armando

2012-01-01T23:59:59.000Z

428

Information Release Notice - Energy Information Administration  

U.S. Energy Information Administration (EIA)

On February 22, 2010, the Energy Information Administration (EIA) will change the web addresses for key information releases in the Weekly Natural Gas Storage Report ...

429

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

July 26, 2012 Feature Stories and Releases Capturing Aerosol Evolution at Cape Cod From July 2012 to June 2013, nearly sixty instruments are obtaining atmospheric data from the...

430

Oak Ridge National Laboratory - Recent News Releases  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Recent News Releases News Categories Science People Business News Archive Story Tips Story Tips Archive Audio Spots Technical Calendar ORNL in the News DOE Pulse About ORNL...

431

NNSA releases summary of Stockpile Stewardship experiments |...  

NLE Websites -- All DOE Office Websites (Extended Search)

Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > NNSA...

432

NREL: Science and Technology - News Release Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Department's National Renewable Energy Laboratory (NREL) hosts its annual Industry Growth Forum. September 25, 2013 NREL Releases New Roadmap to Reducing Solar PV "Soft...

433

Louisiana Coastal Land Loss Video Release  

U.S. Energy Information Administration (EIA)

Today, the U.S. Geological Survey National Wetlands Research Center is pleased to announce the release of a new Louisiana coastal land loss video, ...

434

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

December 11, 2007 Feature Stories and Releases National User Facility Leads to Multidisciplinary Climate Research Contact: Lynne Roeder, ARM Public Information Officer,...

435

2012 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 70 Results Prev 12345 Next Supercomputers, materials and bears: ORNL marks eventful 2012 Supercomputers, materials and bears: ORNL marks eventful 2012...

436

EIA - Annual Energy Outlook 2013 Early Release  

U.S. Energy Information Administration (EIA)

This release is an abridged version of the Annual Energy Outlook that highlights changes in the AEO Reference case projections for key energy topics.

437

NIST 'Catch and Release' Program Could Improve ...  

Science Conference Proceedings (OSTI)

NIST 'Catch and Release' Program Could Improve Nanoparticle Safety Assessment. ... surface (left), the NIST team can apply a mild electric field and ...

2012-01-10T23:59:59.000Z

438

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Facility News, Feature Stories and Releases Research Flights Completed for Biomass Burning Field Campaign Bookmark and Share The Gulstream-1 heads toward a smoke plume during a...

439

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

Collaboration with India Instrumented sites will gather data to study impact of aerosols on cloud formation and precipitation For Immediate Release: June 10, 2011 ARM Mobile...

440

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

March 31, 2008 Feature Stories and Releases Aerosols and Clouds: A Complex Climate Connection New data will help researchers examine cloud composition and resulting effects on...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

SG Network System Requirements Specification- Interim Release...  

NLE Websites -- All DOE Office Websites (Extended Search)

Specification- Interim Release 3 This document has been created to support NIST Smart Grid Interoperability Priority Action Plans (PAP) 1 & 2 and provide Utilities,...

442

Comparative analysis of print media coverage of nuclear power and coal issues  

SciTech Connect

Nuclear power has been a more important topic than has coal for the print media, and has received somewhat different treatment. Compared to the number of coal articles, almost twice as many nuclear power articles were printed from 1972 through 1976. Also, while the number of nuclear power articles increased somewhat steadily from 1972 through 1976, the number of coal articles peaked in 1974 and has decreased since. The newspapers sampled gave more prominence to nuclear articles in terms of article type and article location. Also, nuclear articles were more often issue-oriented compared to coal articles. Coal articles were most often about coal mining, labor force concerns, and regulations controls. Nuclear power articles, on the other hand, were mostly about reactor operation. The main issues discussed in the coal articles pertained most to political decisions affecting coal use, to strikes, and to health and safety. The main nuclear issues pertained to economics, to health and safety, and to political decisions. Newspapers handled nuclear power articles in a more polarized manner compared to coal articles which were handled in a more neutral manner. Magazine articles were significantly more antinuclear than anticoal. Some qualifications about these conclusions are included. (LTN)

Nealey, S.M.; Rankin, W.L.; Montano, D.E.

1978-10-01T23:59:59.000Z

443

Ultrasonically Sprayed and Inkjet Printed Thin Film Electrodes for Organic Solar Cells  

Science Conference Proceedings (OSTI)

Thin film pi-conjugated poly(3,4ethylenedioxythiophene): poly(styrenesulphonate) (PEDOT:PSS) as a hole transport layer on indium tin oxide is a key element in some of the most efficient organic photovoltaic and light emitting devices to date. Films are typically deposited by spincoating, which is not readily scalable. In this paper we investigate the critical parameters for both inkjet and ultrasonic spray deposition of PEDOT:PSS thin films on commercial indium tin oxide as a potentially scalable approach to contact formation. Inkjet parameters investigated include drop spacing and substrate temperature. Ultrasonic spray coating parameters investigated include substrate temperature and solution flow rate. We also show that the ink viscosity has a Newtonian character, making it well suited for inkjet printing. Films were characterized via optical profilometry, sheet resistance and atomic force microscopy. Optimized inkjet printed and ultrasonic sprayed PEDOT:PSS films were then compared to spincast layers in a prototypical bulk heterojunction photovoltaic device employing a poly(3-hexylthiophene) and [6,6]-PCBM (6,6-phenylC61-butyric acid-methyl ester) blend as the absorber. Practically all three approaches produced devices of comparable efficiency. Efficiencies were 3.6%, 3.5% and 3.3% for spin, spray and inkjet depositions respectively.

Steirer, K. X.; Berry, J. J.; Reese, M. O.; van Hest, M. F. A. M.; Miedaner, A.; Liberatore, M. W.; Collins, R. T.; Ginley, D. S.

2009-01-01T23:59:59.000Z

444

SANDIA REPORT  

Office of Scientific and Technical Information (OSTI)

1-0516 * U 1-0516 * U C - 2 7 4 Unlimited Release Printed May 1991 SEP1 2 1991 PC-1D Installation Manual and User's Guide Version 3.1 Paul A. Basore !- Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 for the United States Department of Energy under Contract DE-AC04-76DP00789 SF2900CH8-81) DISTRIBUTION OF THIS DOCUMENT IS UNLIMITED Issued by Sandia National Laboratories, operated for the United States Department of Energy by Sandia Corporation. NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Govern- ment nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, makes any warranty, express

445

Fission Energy Release for 16 Fissioning Nuclides  

Science Conference Proceedings (OSTI)

This report describes results of a study of fission energy releases and the components of this energy. Energy releases for primary isotopes, for which relatively good experimental quantities exist, were determined by a combination of mass-defect systematics and least-square fits with the experimental data. Only the systematic study was carried out for the remaining isotopes.

1981-03-01T23:59:59.000Z

446

Selection of Hydrological Model for Waterborne Release  

Science Conference Proceedings (OSTI)

This evaluation will aid in determining the potential impacts of liquid releases to downstream populations on the Savannah River. The purpose of this report is to evaluate the two available models and determine the appropriate model for use in following waterborne release analyses. Additionally, this report will document the Design Basis and Beyond Design Basis accidents to be used in the future study.

Blanchard, A.

1999-04-21T23:59:59.000Z

447

EIA - Annual Energy Outlook 2011 Early Release  

Gasoline and Diesel Fuel Update (EIA)

April 2012 April 2012 | Report Number: DOE/EIA-0383ER(2012) This release is an abridged version of the Annual Energy Outlook that highlights changes in the AEO Reference case projections for key energy topics. The Early Release includes data tables for the Reference case only. The full AEO2011 will be released April 26, 2011. Download the AEO2011 Early Release Report Introduction In preparing the AEO2011, EIA evaluated a wide range of trends and issues that could have major implications for U.S. energy markets. This overview focuses primarily on one case, the AEO2011 Reference case, which is presented and compared with the AEO2010 Reference case released in December 2009 (see Table 1). Because of the uncertainties inherent in any energy market projection, the Reference case results should not be viewed in

448

Environmental release summary (ERS) database CY 1997  

Science Conference Proceedings (OSTI)

This report discusses the Environmental Release Summary (ERS) database. The current needs of the Effluent and Environmental database is continually modified to fulfill monitoring (EEM) program (managed by Waste Management Federal Services of Hanford, Incorporated, Air and Water Services Organization). Changes are made to accurately calculate current releases, to affect how past releases are calculated. This document serves as a snap-shot of the database and software for the CY-1997 data and releases. This document contains all of the relevant data for calculating radioactive-airborne and liquid effluent. The ERS database is the official repository for the CY-1997 ERS release reports and the settings used to generate those reports. As part of the Tri-Party Agreement, FDH is committed to provide a hard copy of the ERS database for Washington State Department of Ecology, upon request. This document also serves as that hard copy for the last complete calendar year.

Gleckler, B.P.

1998-07-01T23:59:59.000Z

449

SRP RADIOACTIVE WASTE RELEASES S  

Office of Scientific and Technical Information (OSTI)

. . . . . . -- SRP RADIOACTIVE WASTE RELEASES S t a r t u p t h r o u g h 1 9 5 9 September 1 9 6 0 _- R E C O R D - W O R K S T E C H N I C A L D E P A R T M E N T 1 J. E. C o l e , W i l n i 1 4 W. P. 3ebbii 3 H. Worthington, Wilm 16 C. $?. P~.t-Lei-s~:; - 5 J. D. E l l e t t - 17 E. C. Morris 6 F. H. Endorf 19 3 . L. &tier 7 K. W. F r e n c h 20 bi. C . 3 e i n i g 8 J. K. Lower 2 1 2. 3 . 3 G : - x r 9 K. W. M i l l e t t 22 R . FJ . V 2 x 7 : W ~ ~ C k 1 c - 2 J. B. Tinker, W i h L-, i . c . E?-ens 4 W F i l e P. 3 . K t B U ? & J. A. Monier, Jr. 13. : . A. KcClesrer. 1 0 M. 2 . Wahl . - 23 C. Ashley C. W. J. Wende 24 T I S F i l e 11 J. W. Morris - 2s T'pC File D. E. Waters 26 P3D F i l e , 736-C R. B. Fenninger 33 V l ~ a l Records F i l e 12 W. P. Overbeck - 27 -23 P3D % x : r a Czpies P33 2e:ol.d C ~ p l *iB+ ' / - - & OF THIS DQCUMENT I S UNuMITEI) E. 1. ciu /'(I,\ 7' d

450

Inkjet printing and low power laser annealing of silver nanoparticle traces for the realization of low resistivity lines for flexible electronics  

Science Conference Proceedings (OSTI)

We report on the realization of low resistance silver lines by inkjet printing of a commercial silver-based ink on a flexible kapton substrate and subsequent low energy laser annealing to promote nanoparticle coalescence. Our approach resulted in low ... Keywords: Flexible electronics, Inkjet printing, Laser annealing, Thin films

A. Chiolerio; G. Maccioni; P. Martino; M. Cotto; P. Pandolfi; P. Rivolo; S. Ferrero; L. Scaltrito

2011-08-01T23:59:59.000Z

451

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

German German The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in German. Some may have English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in German. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to German language societies. If you wish to view societies in another language, please select from the following options. Chinese Dutch English

452

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Italian Italian The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Italian. Some may have minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in Italian. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Italian language societies. If you wish to view societies in another language, please select from the following options. Chinese

453

Printed circuit board impedance matching step for microwave (millimeter wave) devices  

SciTech Connect

An impedance matching ground plane step, in conjunction with a quarter wave transformer section, in a printed circuit board provides a broadband microwave matching transition from board connectors or other elements that require thin substrates to thick substrate (>quarter wavelength) broadband microwave (millimeter wave) devices. A method of constructing microwave and other high frequency electrical circuits on a substrate of uniform thickness, where the circuit is formed of a plurality of interconnected elements of different impedances that individually require substrates of different thicknesses, by providing a substrate of uniform thickness that is a composite or multilayered substrate; and forming a pattern of intermediate ground planes or impedance matching steps interconnected by vias located under various parts of the circuit where components of different impedances are located so that each part of the circuit has a ground plane substrate thickness that is optimum while the entire circuit is formed on a substrate of uniform thickness.

Pao, Hsueh-Yuan; Aguirre, Jerardo; Sargis, Paul

2013-10-01T23:59:59.000Z

454

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Other Other The following scientific society websites represent research and development interests that are within the E-print Network scope, but are in a language not found on one of the other lists of Scientific Societies. These sites may have some minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in alternative languages. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to societies in languages other than one of the primary languages. If you wish to view

455

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

French French The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate in French. Some may have minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in French. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to French language societies. If you wish to view societies in another language, please select from the following options. Chinese Dutch English

456

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Dutch Dutch The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Dutch. Some may have English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in Dutch. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Dutch language societies. If you wish to view societies in another language, please select from the following options. Chinese English French

457

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Nordic Nordic The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in one of the Nordic languages. Some may have minimal English content on the linking pages. Some of these societies may also provide electronic publications and/or information concerning scientific literature published in Nordic languages. The intent of this compilation is to provide an easy entry point into these communities in the Nordic region and to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Nordic language societies. If you wish to view societies in another language, please select from the following options.

458

Browse by Discipline -- E-print Network Subject Pathways: Fission and  

Office of Scientific and Technical Information (OSTI)

H I J K L M N O P Q R S H I J K L M N O P Q R S T U V W X Y Z Hale, Piers J. (Piers J. Hale) - Department of the History of Science, University of Oklahoma Halvorson, Hans (Hans Halvorson) - Department of Philosophy, Princeton University Hammer, David (David Hammer) - Departments of Education & Physics and Astronomy, Tufts University Hansen, James E. (James E. Hansen) - Goddard Institute for Space Studies Harnad, Stevan (Stevan Harnad) - E-Prints on Cognitive Psychology & School of Electronics and Computer Science, University of Southampton Harrell, Mara (Mara Harrell) - Department of Philosophy, Carnegie Mellon University Harrington, Jonathan (Jonathan Harrington) - Institut für Phonetik und Sprachverarbeitung, Ludwig-Maximilians-Universität München

459

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

English English The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in English. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in English. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to English language societies. If you wish to view societies in another language, please select from the following options. Chinese Dutch French German Italian Japanese Nordic Russian Spanish and Portuguese

460

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Spanish and Portuguese Spanish and Portuguese The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Spanish, Portuguese, or Catalan. Some may have minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in Spanish, Portuguese, or Catalan. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Spanish and Portuguese language societies. If you wish to view societies in another

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Browse Societies by Language -- E-print Network Societies by Language:  

Office of Scientific and Technical Information (OSTI)

Chinese Chinese The following scientific society websites represent research and development interests that are within the E-print Network scope. They communicate primarily in Chinese. Some may have minimal English content on the linking pages. In addition, some of these societies may also provide electronic publications and/or information concerning scientific literature published in Chinese. The intent of this compilation is to provide an easy entry point into these scientific communities to encourage the formation of personal contacts among researchers pursuing similar interests. You are currently viewing the page that provides access to Chinese language societies. If you wish to view societies in another language, please select from the following options. Dutch

462

Low AC Loss YBCO Coated Conductor Geometry by Direct Inkjet Printing  

Science Conference Proceedings (OSTI)

The second generation (2G) high temperature superconductors (HTS) wire offers potential benefits for many electric power applications, including ones requiring filamentized conductors with low ac loss, such as transformers and fault current limiters. However, the use of 2G wire in these applications requires the development of both novel multi-filamentary conductor designs with lower ac losses and the development of advanced manufacturing technologies that enable the low-cost manufacturing of these filamentized architectures. This Phase I SBIR project focused on testing inkjet printing as a potential low-cost, roll-to-roll manufacturing technique to fabricate potential low ac loss filamentized architectures directly on the 2G template strips.

Rupich, Martin, Dr. [American Superconductor Corporation; Duckworth, Robert, Dr. [Oak Ridge National Laboratory

2009-10-01T23:59:59.000Z

463

Method for formation of high quality back contact with screen-printed local back surface field  

SciTech Connect

A thin silicon solar cell having a back dielectric passivation and rear contact with local back surface field is described. Specifically, the solar cell may be fabricated from a crystalline silicon wafer having a thickness from 50 to 500 micrometers. A barrier layer and a dielectric layer are applied at least to the back surface of the silicon wafer to protect the silicon wafer from deformation when the rear contact is formed. At least one opening is made to the dielectric layer. An aluminum contact that provides a back surface field is formed in the opening and on the dielectric layer. The aluminum contact may be applied by screen printing an aluminum paste having from one to 12 atomic percent silicon and then applying a heat treatment at 750 degrees Celsius.

Rohatgi, Ajeet (Marietta, GA); Meemongkolkiat, Vichai (Atlanta, GA)

2010-11-30T23:59:59.000Z

464

Argonne Historical News Releases about Nuclear Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Releases Releases About Director's Welcome Organization Achievements Highlights Fact Sheets, Brochures & Other Documents Multimedia Library Visit Argonne Work with Argonne Contact us Nuclear Energy Why Nuclear Energy? Why are some people afraid of Nuclear Energy? How do nuclear reactors work? Cheaper & Safer Nuclear Energy Helping to Solve the Nuclear Waste Problem Nuclear Reactors Nuclear Reactors Early Exploration Training Reactors Basic and Applied Science Research LWR Technology Development BORAX-III lighting Arco, Idaho (Press Release) Heavy Water and Graphite Reactors Fast Reactor Technology Integral Fast Reactor Argonne Reactor Tree CP-1 70th Anniversary CP-1 70th Anniversary Argonne's Nuclear Science and Technology Legacy Argonne's Nuclear Science and Technology Legacy

465

Selection of Hydrological Model for Waterborne Release  

Science Conference Proceedings (OSTI)

Following a request from the States of South Carolina and Georgia, downstream radiological consequences from postulated accidental aqueous releases at the three Savannah River Site nonreactor nuclear facilities will be examined. This evaluation will aid in determining the potential impacts of liquid releases to downstream populations on the Savannah River. The purpose of this report is to evaluate the two available models and determine the appropriate model for use in following waterborne release analyses. Additionally, this report will document the accidents to be used in the future study.

Blanchard, A.

1999-04-21T23:59:59.000Z

466

Wellcome Collection's First Major Temporary Exhibition ...Leonardo da Vinci Drawings, Andy Warhol Prints, Live Heart Surgery, Sacred Heart  

E-Print Network (OSTI)

The Heart Wellcome Collection's First Major Temporary Exhibition ...Leonardo da Vinci Drawings, Andy Warhol Prints, Live Heart Surgery, Sacred Heart Imagery Never Before Seen In Europe, Egyptian Book of the Dead, Foundling Cards, Venous Anatomy Tables... - The Heart book announced; writers include Jonathan

Maizels, Rick

467

Dynamics of Atmospheres and Oceans, 7 (1983) 95-109 Elsevier Scientific Publishing Company, Amsterdam -Printed in The Netherlands  

E-Print Network (OSTI)

into the ocean on an 8° � 10° grid. Assuming no net annual heat storage, the annual surface heat fluxes into any, Amsterdam - Printed in The Netherlands 95 ANNUAL OCEANIC HEAT TRANSPORTS COMPUTED FROM AN ATMOSPHERIC MODEL 24, 1982) ABSTRACT Miller, J.R., Russell, G.L. and Tsang, L.-C., 1983. Annual oceanic heat transports

Fridlind, Ann

468

MECHANICS OF SOLIDS [published as a section of the article on MECHANICS in the 1993 printing of the  

E-Print Network (OSTI)

MECHANICS OF SOLIDS [published as a section of the article on MECHANICS in the 1993 printing INTRODUCTION The application of the principles of mechanics to bulk matter is conventionally divided into the mechanics of fluids and the mechanics of solids. The entire subject is often called continuum mechanics

469

energy.gov -Speeches (Print Version) Tuesday, February 4, 2003 http://www.energy.gov/HQDocs/speeches/2003/febss/  

E-Print Network (OSTI)

energy.gov - Speeches (Print Version) Tuesday, February 4, 2003 http://www.energy.gov/HQDocs/speeches/2003/febss/ 04BudgetPressConferenceRemarks_v.html Page: 1 Press Conference Remarks Energy Secretary Spencer Abraham 2004 DOE Budget Submission Forrestal Building Washington, DC February 3, 2003 Thank you

470

Last printed 3/16/2004 3:01 PM High-Frequency (Light) Borehole-Radar System  

E-Print Network (OSTI)

Last printed 3/16/2004 3:01 PM High-Frequency (Light) Borehole-Radar System Ramac from Mala Geoscience Packing List 1) Radar control unit (Ramac surface GPR system) (Old or New CU2 is O.K.). 2) Laptop computer with acquisition software, manuals, logbook and protocol sheets. 3) Backup system; zip, jaz, or CD

Barrash, Warren

471

Electrical Characterization of Printed Nanocrystalline Silicon Films, Cooperative Research and Development Final Report, CRADA Number CRD-07-00241  

DOE Green Energy (OSTI)

This CRADA helped Innovalight characterize and quantify their ink-based selective emitter technology. Controlled localized doping of selective emitter structures via Innovalight Silicon Ink technology was demonstrated. Both secondary ion mass spectrometry and scanning capacitance microscopy revealed; abrupt lateral dopant profiles at ink-printed boundaries. Uniform doping of iso- and pyramidal surfaces was also verified using scanning electron microscopy dopant contrast imaging.

Young, D.

2011-05-01T23:59:59.000Z

472

Annals of Nuclear Eneroy, Vol. 7. pp. 171 to 183 Pergamon Press Ltd. 1980. Printed in Great Britain  

E-Print Network (OSTI)

slab reactor in the modified one-group theory, and subsequently, the neutronresponse to twoAnnals of Nuclear Eneroy, Vol. 7. pp. 171 to 183 Pergamon Press Ltd. 1980. Printed in Great Britain I. P.~ZSIT*and G. TH. ANALYTIS~ Department of Nuclear Engineering,Queen Mary College,Mile End Road

Pázsit, Imre

473

Annals of Nuclear Energy, Vol. 7, pp. 535 to 539 Pergamon Press Ltd. 1980. Printed in Great Britain  

E-Print Network (OSTI)

ON MULTI-MEDIA CALCULATIONS IN THE THEORY OF NEUTRON DIFFUSION J. R. MAIORINO* and C. E. SIEWERT NuclearAnnals of Nuclear Energy, Vol. 7, pp. 535 to 539 Pergamon Press Ltd. 1980. Printed in Great Britain) Abstract--The FN method is used to solve the critical problem for a three-region reactor and to compute

Siewert, Charles E.

474

Sequential Printing by Laser-Induced Forward Transfer To Fabricate a Polymer Light-Emitting Diode Pixel  

E-Print Network (OSTI)

Sequential Printing by Laser-Induced Forward Transfer To Fabricate a Polymer Light-Emitting Diode-1015, Lausanne, Switzerland ABSTRACT: Patterned deposition of polymer light-emitting diode (PLED Organic light-emitting diodes (OLEDs) have been investigated in detail for nearly a quarter of a century,1

475

Red-green-blue polymer light-emitting diode pixels printed by optimized laser-induced forward transfer  

E-Print Network (OSTI)

Red-green-blue polymer light-emitting diode pixels printed by optimized laser-induced forward tri-color organic light-emitting diode (OLED) pixels. At reduced pressures, and with a defined donor already been used to fabricate basic small-molecule organic light-emitting diodes (OLEDs)2,3 and polymeric

476

Smart infrastructure for carbon foot print analysis of Electric Vehicles V Suresh, G Hill, Prof P T Blythe  

E-Print Network (OSTI)

Smart infrastructure for carbon foot print analysis of Electric Vehicles V Suresh, G Hill, Prof P of electric vehicles through on-road testing, user led trials and the analysis of the data collected from, trip profile, auxiliary loads and driving styles to determine how the battery discharges and recharges

Newcastle upon Tyne, University of

477

Pre-Print Version Impaired Control of Effector T cells by Regulatory T Cells: a Clue to Loss of Oral  

E-Print Network (OSTI)

and to controls. Conclusion. Our results indicate that effector T lymphocytes from active CD become resistant of CD4+CD25+FOXP3+ LPL were significantly increased in patients with active CD, proliferation and IFNPre-Print Version 1 Impaired Control of Effector T cells by Regulatory T Cells: a Clue to Loss

Paris-Sud XI, Université de

478

energy.gov -Headquarters' Press Release (Print Version) Tuesday, February 4, 2003 http://www.energy.gov/HQPress/releases03/febpr/pr03027_v.htm Page: 1  

E-Print Network (OSTI)

of a mixed oxide (MOX) fuel fabrication facility in the U.S. and U.S. efforts to assist Russia with the start of construction of an industrial scale MOX fuel fabrication facility. Additionally, the request includes $30

479

Soil Data Release, Aug. 18, 2000  

NLE Websites -- All DOE Office Websites (Extended Search)

Release, Aug. 18 The ORNL DAAC now offers a data set entitled "Global Distribution of Plant-Extractable Water Capacity of Soil (Dunne)." The data set was added to the holdings in...

480

Global Soil Data Release, Dec. 20, 2000  

NLE Websites -- All DOE Office Websites (Extended Search)

Soil Data Available The ORNL DAAC has released a data set entitled "Global Gridded Surfaces of Selected Soil Characteristics (IGBP-DIS)." The data surfaces were generated by the...

Note: This page contains sample records for the topic "unlimited release printed" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

EM Press Releases | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

September 19, 2011 September 19, 2011 Annual Environmental Monitoring Report Released The National Nuclear Security Administration Nevada Site Office (NNSA/NSO) has released the Nevada National Security Site Environmental Report 2010. September 15, 2011 DOE Hosts German Energy Official, Signs MOU to Share WIPP Information CARLSBAD, N.M. - A high-ranking energy official from Germany formalized a partnership between her country and the United States during a recent visit to the Waste Isolation Pilot Plant (WIPP). September 15, 2011 Third Chapter of Hanford Story Released to Public - Chapter Dedicated to Those Who Helped Complete Projects Funded by Recovery Act RICHLAND, Wash. - The Department of Energy is releasing the third chapter of The Hanford Story today to the public. September 13, 2011

482

EIA - Annual Energy Outlook 2008 (Early Release)  

Gasoline and Diesel Fuel Update (EIA)

Release) > Year-by-Year Reference Case Tables (2005-2030) Release) > Year-by-Year Reference Case Tables (2005-2030) Annual Energy Outlook 2008 with Projections to 2030 (Early Release) The early release version of the AEO2008 reference case does not include consideration of the H.R.6, "Energy Independence and Security Act of 2007," that was signed into law on December 19, 2007. EIA is compiling a revised reference case that includes the impact of H.R.6. Year-by-Year Reference Case Tables (2005-2030) Table Title Formats Summary Reference Case Tables Year-by-Year Reference Case Tables Table 1. Total Energy Supply and Disposition Summary Table 2. Energy Consumption by Sector and Source Table 3. Energy Prices by Sector and Source Table 4. Residential Sector Key Indicators and Consumption Table 5. Commercial Sector Indicators and Consumption

483

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

August 17, 2009 Feature Stories and Releases The Air is Rare Up There Science team ascends nearly to height of Everest's base camp for atmospheric data Dave Turner (left) and...

484

Differentially private data release through multidimensional partitioning  

Science Conference Proceedings (OSTI)

Differential privacy is a strong notion for protecting individual privacy in privacy preserving data analysis or publishing. In this paper, we study the problem of differentially private histogram release based on an interactive differential privacy ...

Yonghui Xiao; Li Xiong; Chun Yuan

2010-09-01T23:59:59.000Z

485

1995 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

5 1995 ORNL Press Releases 1-10 of 166 Results Prev 12345 Next Bayne wins "Statistics in Chemistry" award OAK RIDGE, Tenn., Dec. 19, 1995 - Charles K. Bayne, group leader in the...

486

NREL: Biomass Research - News Release Archives  

NLE Websites -- All DOE Office Websites (Extended Search)

than 15,000 votes. September 28, 2010 NREL Releases BioEnergy Atlas - a Comprehensive Biomass Mapping Application BioEnergy Atlas, a Web portal that provides access to two...

487

NETL: News Release - Methane Hydrate Production Technologies...  

NLE Websites -- All DOE Office Websites (Extended Search)

of CO2 molecules for methane molecules in the solid-water hydrate lattice, the release of methane gas, and the permanent storage of CO2 in the formation. This field experiment will...

488

VAP Development: Initiation, Development, Evaluation, and Release  

SciTech Connect

This white paper provides a plan to formalize the evaluation of newly developed VAPs and a framework for the development of value-added products through four different stages: Initiation, Development, Evaluation, and Release.

Jensen, M; Collis, Fast, J; Flynn, C; Mather, J; McFarlane, S; Monroe, J; Sivaraman, C; Xie, S

2011-02-23T23:59:59.000Z

489

2006 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

6 2006 ORNL Press Releases 1-10 of 83 Results Prev 12345 Next SNS completion highlights year of ORNL achievements OAK RIDGE, Tenn., Dec. 28, 2006 - Creation of the first neutrons...

490

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

December 7, 2010 Feature Stories and Releases User Facility Highlights at 2010 AGU Fall Meeting Scientists from around the world use data from the U.S. Department of Energy's...

491

ARM - Feature Stories and Releases Article  

NLE Websites -- All DOE Office Websites (Extended Search)

10, 2009 Facility News, Feature Stories and Releases Highlights from DOE Scientific User Facility at AGU Fall Meeting 2009 Scientists from around the world use data from the U.S....

492

2005 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 113 Results Prev 12345 Next Operation cleaner fuels OAK RIDGE, Tenn., Dec. 28, 2005 - Ships powered with low-sulfur diesel fuels may have cleaner...

493

2001 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

1 2001 ORNL Press Releases 1-10 of 52 Results Prev 12345 Next Transportation research opportunities to increase at NTRC OAK RIDGE, Tenn., Dec. 27, 2001 - Scientists studying...

494

2009 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 100 Results Prev 12345 Next New ORNL building observes top-off ceremony OAK RIDGE, Tenn., Dec. 22, 2009 - Construction crews have installed the final...

495

2008 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 98 Results Prev 12345 Next UT-Battelle-funded children's home opens in India UT-Battelle-funded children's home opens in India OAK RIDGE, Tenn., Dec....

496

1997 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

7 1997 ORNL Press Releases 1-10 of 109 Results Prev 12345 Next ORNL environmental researcher honored with award from YWCA OAK RIDGE, Tenn., Dec. 15, 1997 - Dr. Carolyn Hunsaker, a...

497

2002 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

2 2002 ORNL Press Releases 1-10 of 36 Results Prev 1234 Next ORNL researcher elected fellow OAK RIDGE, Tenn., Dec. 30, 2002 - Vince Mei, a researcher in the Engineering Science and...

498

2010 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 91 Results Prev 12345 Next Upgrading dams suggested as strong renewable energy option OAK RIDGE, Tenn., Dec. 22, 2010 - Upgrading existing dams with new...

499

1994 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

4 1994 ORNL Press Releases 1-10 of 19 Results Prev 12 Next Nuclear physics device for ORNL accelerator due in from England OAK RIDGE, Tenn., Dec. 19, 1994 - Although the Daresbury...

500

2007 ORNL Press Releases | ornl.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

ORNL Press Releases 1-10 of 88 Results Prev 12345 Next Shopping on-line reduces a midnight clear's carbon dioxide Shopping on-line reduces a midnight clear's carbon dioxide OAK...