National Library of Energy BETA

Sample records for union identification check

  1. Check valve

    DOE Patents [OSTI]

    Upton, Hubert Allen; Garcia, Pablo

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion.

  2. Check valve

    DOE Patents [OSTI]

    Upton, H.A.; Garcia, P.

    1999-08-24

    A check valve for use in a GDCS of a nuclear reactor and having a motor driven disk including a rotatable armature for rotating the check valve disk over its entire range of motion is described. In one embodiment, the check valve includes a valve body having a coolant flow channel extending therethrough. The coolant flow channel includes an inlet end and an outlet end. A valve body seat is located on an inner surface of the valve body. The check valve further includes a disk assembly, sometimes referred to as the motor driven disc, having a counterweight and a disk shaped valve. The disk valve includes a disk base having a seat for seating with the valve body seat. The disk assembly further includes a first hinge pin member which extends at least partially through the disk assembly and is engaged to the disk. The disk valve is rotatable relative to the first hinge pin member. The check valve also includes a motor having a stator frame with a stator bore therein. An armature is rotatably positioned within the stator bore and the armature is coupled to the disk valve to cause the disk valve to rotate about its full range of motion. 5 figs.

  3. Checking Quotas

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Checking Quotas Checking Quotas Home Directory Quota The $HOME directory on PDSF has a quota of 5GB and 50K inodes (the number of inodes corresponds roughly to the number of files and directories in $HOME). If you are over quota, you will see the following message when you login: You are at or near quota on at least one filesystem. Please reduce your filesystem utilization before submitting more jobs. The "myquota" tool will display your quota usage. For future questions, please

  4. Wireline safety check valve

    SciTech Connect (OSTI)

    Brieger, E. F.; Laborde, R. G.

    1981-05-12

    A check valve for wireline operations is employed in oil well drilling where a high pressure is encountered in a well. The check valve permits a wireline to extend through the check valve and a ball chamber therein. The ball chamber has a check ball therein that rests between the wireline and a non restrictive flow passage open to the well, so that upon loss of the wireline the fluid or gas tending to escape forces the ball to block the wireline opening.

  5. Agreement Type Union

    National Nuclear Security Administration (NNSA)

    Union of North America 872 14 International Union of Oprating Engineers (Maintenance Engineers) 501 22 Local Joint Executive Board of Las vegas Culinary Workers 226 49 ...

  6. CMM Interim Check (U)

    SciTech Connect (OSTI)

    Montano, Joshua Daniel

    2015-03-23

    Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length. Unfortunately, several nonconformance reports have been generated to document the discovery of a certified machine found out of tolerance during a calibration closeout. In an effort to reduce risk to product quality two solutions were proposed – shorten the calibration cycle which could be costly, or perform an interim check to monitor the machine’s performance between cycles. The CMM interim check discussed makes use of Renishaw’s Machine Checking Gauge. This off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. Data was gathered, analyzed, and simulated from seven machines in seventeen different configurations to create statistical process control run charts for on-the-floor monitoring.

  7. STEP Intern Reference Check Sheet

    Broader source: Energy.gov [DOE]

    STEP Intern Reference Check Sheet, from the Tool Kit Framework: Small Town University Energy Program (STEP).

  8. Liquid blocking check valve

    DOE Patents [OSTI]

    Merrill, John T.

    1984-01-01

    A liquid blocking check valve useful particularly in a pneumatic system utilizing a pressurized liquid fill chamber. The valve includes a floatable ball disposed within a housing defining a chamber. The housing is provided with an inlet aperture disposed in the top of said chamber, and an outlet aperture disposed in the bottom of said chamber in an offset relation to said inlet aperture and in communication with a cutaway side wall section of said housing.

  9. Enel Union Fenosa Renovables EUFER formerly Union Fenosa Energia...

    Open Energy Info (EERE)

    Fenosa Renovables EUFER formerly Union Fenosa Energia Especiales Jump to: navigation, search Name: Enel Union Fenosa Renovables (EUFER) (formerly Union Fenosa Energia Especiales)...

  10. MEETINGS WITH UNION OFFICIALS

    Broader source: Energy.gov [DOE]

    Guidance as to how to handle requests from union officials to meet with Department officials so that there is no undue legal risk.

  11. Check Estimates and Independent Costs

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1997-03-28

    Check estimates and independent cost estimates (ICEs) are tools that can be used to validate a cost estimate. Estimate validation entails an objective review of the estimate to ensure that estimate criteria and requirements have been met and well documented, defensible estimate has been developed. This chapter describes check estimates and their procedures and various types of independent cost estimates.

  12. #SOTU Roundup: Energy Highlights from the 2014 State of the Union |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy #SOTU Roundup: Energy Highlights from the 2014 State of the Union #SOTU Roundup: Energy Highlights from the 2014 State of the Union January 29, 2014 - 12:45pm Addthis On January 28, 2014, President Obama delivered his fifth State of the Union address at the U.S. Capitol Building. Above, check out the energy and climate change highlights from the speech. | Video compilation by Matty Greene, Energy Department. Marissa Newhall Marissa Newhall Director of Digital Strategy

  13. Agreement Type Union

    National Nuclear Security Administration (NNSA)

    Type Union Local #/Name Number of Employees Project Labor Agreement International Association of Heat and Frost Insulators and Allied Workers 135 2 International Brothehood of Boilermakers, Iron Ship Builders, Blacksmith Forgers and Helpers 92 0 International Union of Bricklayers & Allied Craftsmen 13 0 Regional Council of Carpenters 1780 & 1977 13 Operative Plasterers and Cement Mason International Association Operative Plasterers and Cement Mason International Association 1

  14. US - Former Soviet Union environmental management activities

    SciTech Connect (OSTI)

    1995-09-01

    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE`s cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union.

  15. Template:RRHealthCheck | Open Energy Information

    Open Energy Info (EERE)

    to: navigation, search This is the RRHealthCheck template. It is used to generate a health check for one technology within the Regulatory Roadmap. Parameters Technology - The...

  16. Fluid relief and check valve

    DOE Patents [OSTI]

    Blaedel, K.L.; Lord, S.C.; Murray, I.

    1986-07-17

    A passive fluid pressure relief and check valve allows the relief pressure to be slaved to a reference pressure independently of the exhaust pressure. The pressure relief valve is embodied by a submerged vent line in a sealing fluid, the relief pressure being a function of the submerged depth. A check valve is embodied by a vertical column of fluid (the maximum back pressure being a function of the height of the column of fluid). The pressure is vented into an exhaust system which keeps the exhaust out of the area providing the reference pressure.

  17. Liquid-blocking check valve

    DOE Patents [OSTI]

    Merrill, J.T.

    1982-09-27

    A liquid blocking check valve useful particularly in a pneumatic system utilizing a pressurized liquid fill chamber. The valve includes a floatable ball disposed within a housing defining a chamber. The housing is provided with an inlet aperture disposed in the top of said chamber, and an outlet aperture disposed in the bottom of said chamber in an offset relation to said inlet aperture and in communication with a cutaway side wall section of said housing.

  18. Unions, LANL sign labor agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unions, LANL sign labor agreements Unions, LANL sign labor agreements The New Mexico Building and Construction Trades Council and Los Alamos National Security LLC, announced the signing of a series of labor agreements that affect nearly 750 construction and maintenance workers. September 21, 2012 Jay Johnson renews the contracts with the Laboratory's union workers. Jay Johnson (left) associate director for maintenance and infrastructure planning, renews the contracts with the Laboratory's union

  19. at American Geophysical Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the area "Marias Pass," where a lower geological unit contacts an overlying one. ... identification of drilled rock-powder samples analyzed by the Chemistry and Mineralogy ...

  20. Check Out - Combustion Energy Frontier Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FAQ » Check Out Check Out I am staying at the dormitory on-campus. When and where is standard check out? Standard check out is Friday, June 24th. You may bring your dormitory key to the Friend Center and leave it with a CEFRC representative anytime during the day. I am staying at the dormitory on-campus. Can I bring my car closer to the Butler/Scully area to load my luggage when checking out? Yes, similar to check in, you may bring your car and park it in the temporary parking area outside the

  1. Check Heat Transfer Surfaces | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heat Transfer Surfaces Check Heat Transfer Surfaces This tip sheet discusses the importance of checking heat transfer surfaces in process heating systems. PROCESS HEAT TIP SHEET #4 Check Heat Transfer Surfaces (September 2005) (330.85 KB) More Documents & Publications Improving Process Heating System Performance: A Sourcebook for Industry, Second Edition Check Burner Air to Fuel Ratios Process Heating Assessment and Survey Tool (PHAST) Introduction

  2. Unions, LANL sign labor agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the contracts with the Laboratory's union workers. To the right of Johnson are Ray Baca of the New Mexico Building and Construction Trades Council and Tim Babicke and Gerard...

  3. CMM Interim Check Design of Experiments (U)

    SciTech Connect (OSTI)

    Montano, Joshua Daniel

    2015-07-29

    Coordinate Measuring Machines (CMM) are widely used in industry, throughout the Nuclear Weapons Complex and at Los Alamos National Laboratory (LANL) to verify part conformance to design definition. Calibration cycles for CMMs at LANL are predominantly one year in length and include a weekly interim check to reduce risk. The CMM interim check makes use of Renishaw’s Machine Checking Gauge which is an off-the-shelf product simulates a large sphere within a CMM’s measurement volume and allows for error estimation. As verification on the interim check process a design of experiments investigation was proposed to test a couple of key factors (location and inspector). The results from the two-factor factorial experiment proved that location influenced results more than the inspector or interaction.

  4. Las Conchas Challenge Grant Fund checks awarded

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Las Conchas Challenge Grant recipients Las Conchas Challenge Grant Fund checks awarded Checks totaling $57,934 presented to businesses from Los Alamos, Española, and Santa Fe that provided goods and services during the Las Conchas Fire. August 23, 2011 Smokey sunset over the Jemez Smokey sunset over the Jemez Contact Steve Sandoval Communications Office (505) 665-9206 Email LOS ALAMOS, New Mexico, August 23, 2011-Los Alamos National Laboratory Director and Los Alamos National Security, LLC

  5. FORT UNION DEEP

    SciTech Connect (OSTI)

    Lyle A. Johnson Jr.

    2002-03-01

    Coalbed methane (CBM) is currently the hottest area of energy development in the Rocky Mountain area. The Powder River Basin (PRB) is the largest CBM area in Wyoming and has attracted the majority of the attention because of its high permeability and relatively shallow depth. Other Wyoming coal regions are also being targeted for development, but most of these areas have lower permeability and deeper coal seams. This project consists of the development of a CBM stimulation system for deep coal resources and involves three work areas: (1) Well Placement, (2) Well Stimulation, and (3) Production Monitoring and Evaluation. The focus of this project is the Washakie Basin. Timberline Energy, Inc., the cosponsor, has a project area in southern Carbon County, Wyoming, and northern Moffat County, Colorado. The target coal is found near the top of the lower Fort Union formation. The well for this project, Evans No.1, was drilled to a depth of 2,700 ft. Three coal seams were encountered with sandstone and some interbedded shale between seams. Well logs indicated that the coal seams and the sandstone contained gas. For the testing, the upper seam at 2,000 ft was selected. The well, drilled and completed for this project, produced very little water and only occasional burps of methane. To enhance the well, a mild severity fracture was conducted to fracture the coal seam and not the adjacent sandstone. Fracturing data indicated a fracture half-length of 34 ft, a coal permeability of 0.2226 md, and permeability of 15.3 md. Following fracturing, the gas production rate stabilized at 10 Mscf/day within water production of 18 bpd. The Western Research Institute (WRI) CBM model was used to design a 14-day stimulation cycle followed by a 30-day production period. A maximum injection pressure of 1,200 psig to remain well below the fracture pressure was selected. Model predictions were 20 Mscf/day of air injection for 14 days, a one-day shut-in, then flowback. The predicted flowback

  6. FORT UNION DEEP

    SciTech Connect (OSTI)

    Lyle A. Johnson Jr.

    2002-09-01

    Coalbed methane (CBM) is currently the hottest area of energy development in the Rocky Mountain area. The Powder River Basin (PRB) is the largest CBM area in Wyoming and has attracted the majority of the attention because of its high permeability and relatively shallow depth. Other Wyoming coal regions are also being targeted for development, but most of these areas have lower permeability and deeper coal seams. This project consists of the development of a CBM stimulation system for deep coal resources and involves three work areas: (1) Well Placement, (2) Well Stimulation, and (3) Production Monitoring and Evaluation. The focus of this project is the Washakie Basin. Timberline Energy, Inc., the cosponsor, has a project area in southern Carbon County, Wyoming, and northern Moffat County, Colorado. The target coal is found near the top of the lower Fort Union formation. The well for this project, Evans No.1, was drilled to a depth of 2,700 ft. Three coal seams were encountered with sandstone and some interbedded shale between seams. Well logs indicated that the coal seams and the sandstone contained gas. For the testing, the upper seam at 2,000 ft was selected. The well, drilled and completed for this project, produced very little water and only occasional burps of methane. To enhance the well, a mild severity fracture was conducted to fracture the coal seam and not the adjacent sandstone. Fracturing data indicated a fracture half-length of 34 ft, a coal permeability of 0.2226 md, and permeability of 15.3 md. Following fracturing, the gas production rate stabilized at 10 Mscf/day within water production of 18 bpd. The Western Research Institute (WRI) CBM model was used to design a 14-day stimulation cycle followed by a 30-day production period. A maximum injection pressure of 1,200 psig to remain well below the fracture pressure was selected. Model predictions were 20 Mscf/day of air injection for 14 days, a one-day shut-in, then flowback. The predicted flowback

  7. Evaluation of Heat Checking and Washout of Heat Resistant Superalloys...

    Office of Scientific and Technical Information (OSTI)

    Evaluation of Heat Checking and Washout of Heat Resistant Superalloys and Coatings for Die inserts Citation Details In-Document Search Title: Evaluation of Heat Checking and ...

  8. Glovebox pressure relief and check valve

    SciTech Connect (OSTI)

    Blaedel, K.L.

    1986-03-17

    This device is a combined pressure relief valve and check valve providing overpressure protection and preventing back flow into an inert atmosphere enclosure. The pressure relief is embodied by a submerged vent line in a mercury reservior, the releif pressure being a function of the submerged depth. The pressure relief can be vented into an exhaust system and the relieving pressure is only slightly influenced by the varying pressure in the exhaust system. The check valve is embodied by a ball which floats on the mercury column and contacts a seat whenever vacuum exists within the glovebox enclosure. Alternatively, the check valve is embodied by a vertical column of mercury, the maximum back pressure being a function of the height of the column of mercury.

  9. International Union for Conservation of Nature | Open Energy...

    Open Energy Info (EERE)

    Union for Conservation of Nature Jump to: navigation, search Logo: International Union for Conservation of Nature Name: International Union for Conservation of Nature Address: Rue...

  10. Agro Unione Ltda | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Agro Unione Ltda Place: Brazil Product: Sugar and ethanol producer. References: Agro Unione Ltda1 This article is a stub. You can help OpenEI...

  11. Apparatus for checking dimensions of workpieces

    DOE Patents [OSTI]

    Possati, Mario; Golinelli, Guido

    1992-01-01

    An apparatus for checking features of workpieces with rotational symmetry defining a geometrical axis, which includes a base, rest devices fixed to the base for supporting the workpiece with the geometrical axis horizontally arranged, and a support structure coupled to the base for rotation about a horizontal axis. A counterweight and sensor are coupled to the support structure and movable with the support structure from a rest position, allowing loading of the workpiece to be checked onto the rest devices to a working position where the sensor is brought into cooperation with the workpiece. The axis of rotation of the support structure is arranged below the axis of the workpiece, in correspondence to a vertical geometrical plane passing through the workpiece geometric axis when the workpiece is positioned on the rest devices.

  12. Pre-resistance-welding resistance check

    DOE Patents [OSTI]

    Destefan, Dennis E.; Stompro, David A.

    1991-01-01

    A preweld resistance check for resistance welding machines uses an open circuited measurement to determine the welding machine resistance, a closed circuit measurement to determine the parallel resistance of a workpiece set and the machine, and a calculation to determine the resistance of the workpiece set. Any variation in workpiece set or machine resistance is an indication that the weld may be different from a control weld.

  13. Union Eolica Panamena UEP | Open Energy Information

    Open Energy Info (EERE)

    Eolica Panamena UEP Jump to: navigation, search Name: Union Eolica Panamena (UEP) Place: Granada, Spain Sector: Wind energy Product: Granada-based wind project developer company,...

  14. GC GUIDANCE ON MEETINGS WITH UNION OFFICIALS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    matter, the program official should obtain the individual's name, the contract and contractor of interest, the identity of the union and the subject of the requested meeting. ...

  15. File:OperatingPermitCheckList.pdf | Open Energy Information

    Open Energy Info (EERE)

    OperatingPermitCheckList.pdf Jump to: navigation, search File File history File usage File:OperatingPermitCheckList.pdf Size of this preview: 463 599 pixels. Other resolution:...

  16. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    06-05-09 HSS/Union Working Group Meeting June 11, 2009 1:00 - 2:30 pm EST FORS 7E-069 Call-in: 301-903-0688 SUBJECT: 2009 HSS/Union Task Progress Union Working Group Participants: 2008 Topical Union Leads Ron Ault/Tom Schaffer..................AFL-CIO Metal Trades Department Pete Stafford...................................... Building and Construction Trades Department Center for Construction Research & Training (BCTD CPWR) Chico McGill/Dennis Phelps............International Brotherhood of

  17. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    23-09 HSS/Union Working Group Meeting 2009 HSS/Union Task Progress and Next Steps June 11, 2009 In introductory remarks, Glenn Podonsky, Chief Health, Safety and Security Officer, underscored HSS's commitment to engage in this collective effort with the Unions and stakeholders to improve worker health, safety and security across the DOE Complex. He provided an overview of the past several years of the HSS Focus Group effort in which the worker, through Union representatives and stakeholders,

  18. New Employee Check in Packet | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Employee Check in Packet Personnel Information Form (PIF) Intellectual Property Agreement Rules of Behavior - Computer Security Agreement

  19. New Employee Check in Packet | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Employee Check in Packet Personnel Information Form (PIF) Intellectual Property Agreement Rules of Behavior - Computer Security Agreement

  20. union publique HR

    ScienceCinema (OSTI)

    None

    2011-10-06

    Chers Collègues,Je me permets de vous rappeler qu'une réunion publique organisée par le Département HR se tiendra aujourd'hui:Vendredi 30 avril 2010 à 9h30 dans l'Amphithéâtre principal (café offert dès 9h00).Durant cette réunion, des informations générales seront données sur:le CERN Admin e-guide, qui est un nouveau guide des procédures administratives du CERN ayant pour but de faciliter la recherche d'informations pratiques et d'offrir un format de lecture convivial;le régime d'Assurance Maladie de l'Organisation (présentation effectuée par Philippe Charpentier, Président du CHIS Board) et;la Caisse de Pensions (présentation effectuée par Théodore Economou, Administrateur de la Caisse de Pensions du CERN).Une transmission simultanée de cette réunion sera assurée dans l'Amphithéâtre BE de Prévessin et également disponible à l'adresse suivante: http://webcast.cern.chJe me réjouis de votre participation!Meilleures salutations,Anne-Sylvie CatherinChef du Département des Ressources humaines__________________________________________________________________________________Dear Colleagues,I should like to remind you that a plublic meeting organised by HR Department will be held today:Friday 30 April 2010 at 9:30 am in the Main Auditorium (coffee from 9:00 am).During this meeting, general information will be given about:the CERN Admin e-guide which is a new guide to the Organization's administrative procedures, drawn up to facilitate the retrieval of practical information and to offer a user-friendly format;the CERN Health Insurance System (presentation by Philippe Charpentier, President of the CHIS Board) and;the Pension Fund (presentation by Theodore Economou, Administrator of the CERN Pension Fund).A simultaneous transmission of this meeting will be broadcast in the BE Auditorium at Prévessin and will also be available at the following address. http://webcast.cern.chI look forward to your participation!Best regards,Anne-Sylvie Catherin

  1. A Dynamic MPI Software Correctness Checking Tool

    Energy Science and Technology Software Center (OSTI)

    2005-10-31

    Umpire is prototype tool developed at LLNL by Bronis R. de Supinski, J. M. May, Martin Schulz and Jeffery Vetter as part of the ASDE TRTS project for detecting programming errors at runtime in message passing applications. Umpire monitors the MPI operations of an application by interposing itself between the application and the MPI runtime system using the MPI profiling layer. Umpire then checks the application’s MPI behavior for specific errors. Umpire detects errors thatmore » are local to individual MPI tasks, including resource errors (e.g., leaks of MPI datatypes and other opaque objects) and overwrites of non-blocking send buffers. It also detects distributed errors, including deadlocks involving any MPI-1 constructs and datatype mismatches between matching communication operations.« less

  2. Iowa: West Union Green Transformation Project | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    West Union Green Transformation Project Iowa: West Union Green Transformation Project ... These grant funds will be used to close up their buildings-making them more energy ...

  3. Union Temporal de Empresas UTE | Open Energy Information

    Open Energy Info (EERE)

    Temporal de Empresas UTE Jump to: navigation, search Name: Union Temporal de Empresas (UTE) Place: Spain Sector: Solar Product: Developer of PV solar parks. References: Union...

  4. Performance checks with the Alpha Sentry CAM

    SciTech Connect (OSTI)

    Rodgers, J.C.

    1994-08-01

    Before a CAM is put into service, it must be calibrated. The flow meter and detector must be calibrated with an external flow meter to provide accurate flow data, and the detector must be calibrated to produce accurate DPM data. Both flow and DPM data enter into the calculation of the Derived Air Concentration exposure (DAC-hr) by the CAM software. The focus of this report is on methods for checking that the DAC-hr alarm functionality has been properly calibrated and available in installed CAM instruments. The process begins with detector calibration. In order to calibrate the detector, the Alpha Sentry CAM is placed in an off-line calibration mode and detector efficiency calibration is selected. The user is prompted to enter the calibration source DPM and place the source in the CAM head. Upon latching the filter door with the source in place, a count is automatically initiated and completed. From the count data and the user entered DPM data, an efficiency is determined in the Alpha Sentry Manager (ASM) and stored in non-volatile memory in the CAM head electronics. This source is typically a plated {sup 239}Pu or {sup 241}Am source diffused into a stainless steel planchet.

  5. Check Burner Air to Fuel Ratios | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Burner Air to Fuel Ratios Check Burner Air to Fuel Ratios This tip sheet discusses when to check and reset burner air to fuel ratios as well as why it's a simply way to maximize the efficiency of process heating equipment. PROCESS HEATING TIP SHEET #2 Check Burner Air to Fuel Ratios (November 2007) (260.29 KB) More Documents & Publications Waste Heat Reduction and Recovery for Improving Furnace Efficiency, Productivity and Emissions Performance: A BestPractices Process Heating Technical

  6. Deputy Secretary Roundtable Meeting with Unions | Department...

    Broader source: Energy.gov (indexed) [DOE]

    Meeting Agenda (39.25 KB) Meeting Summary (99.77 KB) Safety and Security Reform Plan (353.65 KB) Union Contact List (89.2 KB) More Documents & Publications Technical Standards ...

  7. AVIC Changli Union Energy | Open Energy Information

    Open Energy Info (EERE)

    Beijing Municipality, China Product: China-based JV to manufacture and sell zinc-air batteries. References: AVIC Changli Union Energy1 This article is a stub. You can help...

  8. Union, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Union is a city in Miami County and Montgomery County, Ohio. It falls under Ohio's 8th congressional district and Ohio's 3rd...

  9. Union of Concerned Scientists | Open Energy Information

    Open Energy Info (EERE)

    http:www.ucsusa.org About "The Union of Concerned Scientists is the leading science-based nonprofit working for a healthy environment and a safer world. UCS combines...

  10. 5 Checks & 5 Tips for INCITE | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INCITE Program 5 Checks & 5 Tips for INCITE Mira Computational Readiness Assessment ALCC Program Director's Discretionary (DD) Program Early Science Program INCITE 2016 Projects ...

  11. Tools for Viewing and Quality Checking ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools for Viewing and Quality Checking ARM Data S. Bottone and S. Moore Mission Research Corporation Santa Barbara, California Introduction Mission Research Corporation (MRC) is...

  12. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    29 Oct 2015 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Tech Specs for Boundary and first...

  13. Virginia Residents Check Out New Energy Lending Library | Department...

    Energy Savers [EERE]

    Virginia Residents Check Out New Energy Lending Library Graphic with six different images on it, including the Rethink Energy logo. Residential Network member Arlington County (VA) ...

  14. April 30, 2008; HSS/Union Working Group Meeting to address training - Union Participants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HSS/UNION MEETING: TRAINING HSS/Union Participants/Attendees HSS Participants: 1. Glenn Podonsky - Chief Health, Safety & Security Officer 2. Mari-Jo Campagnone - Senior Advisor to Chief HSS Officer 3. Bill Roege - Director, Corporate Safety Analysis 4. Pat Worthington - Director, Health and Safety 5. Bill McArthur - Director, Worker Safety & Health Policy 6. Tom Traceski - Director, Environmental Policy and Assistance 7. Jeff Harrell - Director, National Training Center [Call-in] UNION

  15. LCLS User Check-In Procedures | Linac Coherent Light Source

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    User Check-In Procedures Data Collection & Analysis | Policies | Proposals | Schedules | Shipping | User Portal Prior to traveleing to SLAC, review changes for badging/automated access and updated user check-in procedures: STEP 1. Register or Update User Portal. Provide or update your user information through the user portal (this must be completed prior to arrival). Ensure that you have correctly listed your current institution. If a user agreement with your institution is not executed in

  16. Unitarity check in gravitational Higgs mechanism (Journal Article) |

    Office of Scientific and Technical Information (OSTI)

    SciTech Connect Journal Article: Unitarity check in gravitational Higgs mechanism Citation Details In-Document Search Title: Unitarity check in gravitational Higgs mechanism The effective field theory of massive gravity has long been formulated in a generally covariant way [N. Arkani-Hamed, H. Georgi, and M. D. Schwartz, Ann. Phys. (N.Y.) 305, 96 (2003).]. Using this formalism, it has been found recently that there exists a class of massive nonlinear theories that are free of the

  17. Union Helps Produce Women Workers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Union Helps Produce Women Workers Union Helps Produce Women Workers January 21, 2010 - 3:15pm Addthis Joshua DeLung At the Community Environmental Center in Long Island City, N.Y. ...

  18. Clay-Union Electric Coop | Open Energy Information

    Open Energy Info (EERE)

    Clay-Union Electric Coop Jump to: navigation, search Name: Clay-Union Electric Coop Place: South Dakota Phone Number: 605-624-2673 Website: www.clayunionelectric.coop Facebook:...

  19. EERE Success Story-Iowa: West Union Green Transformation Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    West Union Green Transformation Project EERE Success Story-Iowa: West Union Green ... These grant funds will be used to close up their buildings-making them more energy ...

  20. U.S.-European Union Joint Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    European Union Joint Statement U.S.-European Union Joint Statement U.S.-European Union Joint Statement prepared as part of the International Partnership for a Hydrogen Economy us_eu_hydrogen_summit_statement.pdf (61.18 KB) More Documents & Publications Microsoft Word - Document1 International Partnerships for the Hydrogen Economy Fact Sheet International Partnerships for the Hydrogen Economy Fact Sheet

  1. U.S.-European Union Joint Statement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    JOINT STATEMENT BY PRESIDENT GEORGE W. BUSH, EUROPEAN COUNCIL PRESIDENT KONSTANDINOS SIMITIS, AND EUROPEAN COMMISSION PRESIDENT ROMANO PRODI ON THE HYDROGEN ECONOMY We affirm our commitment, on behalf of the United States and the European Union, to collaborate on accelerating the development of the hydrogen economy as part of our broadening cooperation on energy. We aim to enhance the security of energy supply, increase diversity of energy sources, and improve local and global environmental

  2. Failure Modes and Causes for Swing and Lift Type Check Valves...

    Office of Scientific and Technical Information (OSTI)

    National Laboratory (ORNL)relative to nuclear industry check valve performance, no ... In cooperation with the Nuclear Industry Check Valve Group (NIC), ORNL has reviewed and ...

  3. Failure Modes and Causes for Swing and Lift Type Check Valves

    Office of Scientific and Technical Information (OSTI)

    National Laboratory (ORNL) relative to nuclear industry check valve performance, no ... In cooperation with the Nuclear Industry Check Valve Group (NIC), ORNL has reviewed and ...

  4. V-156: Linux Kernel Array Bounds Checking Flaw Lets Local Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6: Linux Kernel Array Bounds Checking Flaw Lets Local Users Gain Elevated Privileges V-156: Linux Kernel Array Bounds Checking Flaw Lets Local Users Gain Elevated Privileges May...

  5. Conversion and enrichment in the Soviet Union

    SciTech Connect (OSTI)

    1991-04-01

    In the Soviet Union, just as in the West, the civilian nuclear industry emerged from research work undertaken for nuclear weapons development. At first, researchers tried various techniques for physical separation of uranium isotopes: electromagnetic and molecular-kinetic thermo-diffusion methods; gaseous diffusion; and centrifuge methods. All of those methods, which are based primarily on differences in the atomic mass of uranium isotopes, called for extensive research and the development of new, technically unprecedented equipment. Gradually gaseous diffusion and gas centrifuge technology became recognized as most feasible for industrial use, so research on other methods was terminated. Industrial-scale uranium enrichment in the Soviet Union began in 1949 using the gaseous diffusion method; by the early 1960s, centrifuge technology was in use on an industrial scale. All Soviet production of highly-enriched, weapons-grade uranium was halted in 1987. The Soviet Union now has four enrichment plants in operation (at classified locations), solely for civilian nuclear power needs. All four enrichment plants have centrifuge modules, and enrichment provided by gaseous diffusion accounts for less than 5% of their total output. Two of the four enrichment plants also incorporate facilities for conversion to uranium hexafluoride (UF{sub 6}).

  6. National propane safety week caps fifth anniversary of GAS Check

    SciTech Connect (OSTI)

    Prowler, S.

    1990-09-01

    This paper reports on National Propane Safety Week. The publicity encompassed everything from preventative maintenance to safe winter storage of cylinders. This campaign focused much of its attention on GAS (gas appliance system) Check, the propane industry's most well-known safety program.

  7. Union Bridge, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Union Bridge, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.5689895, -77.176927 Show Map Loading map... "minzoom":false,"mapping...

  8. Kraftwerk Union KWU Siemens Power Generation | Open Energy Information

    Open Energy Info (EERE)

    Services Product: KWU is a provider of components and services to the commercial nuclear utility industry. References: Kraftwerk Union (KWU) - Siemens Power Generation.1...

  9. West Union, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    "alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":"" Hide Map West Union is a town in Steuben County, New York.1 References US Census Bureau...

  10. Union County, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Places in Union County, Ohio Dublin, Ohio Magnetic Springs, Ohio Marysville, Ohio Milford Center, Ohio Plain City, Ohio Richwood, Ohio Unionville Center, Ohio Retrieved from...

  11. Illustrative Scenarios Tool (European Union) | Open Energy Information

    Open Energy Info (EERE)

    Summary LAUNCH TOOL Name: Illustrative Scenarios Tool (European Union) Focus Area: Propane Topics: Opportunity Assessment & Screening Website: www.eutransportghg2050.eucms...

  12. The City of Union City | Open Energy Information

    Open Energy Info (EERE)

    Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Performance Services Energy Purchaser AEP - Indiana Michigan Power Location Union City IL...

  13. Union County, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Climate Zone Number 2 Climate Zone Subtype A. Places in Union County, Florida Lake Butler, Florida Raiford, Florida Worthington Springs, Florida Retrieved from "http:...

  14. Union County, Arkansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Number 3 Climate Zone Subtype A. Places in Union County, Arkansas Calion, Arkansas El Dorado, Arkansas Felsenthal, Arkansas Huttig, Arkansas Junction City, Arkansas Norphlet,...

  15. Union County, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    New Jersey Strategic Energy LLC (New Jersey) Places in Union County, New Jersey Berkeley Heights, New Jersey Clark, New Jersey Cranford, New Jersey Elizabeth, New Jersey...

  16. Union County, South Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Carlisle, South Carolina Jonesville, South Carolina Lockhart, South Carolina Monarch Mill, South Carolina Union, South Carolina Retrieved from "http:en.openei.orgw...

  17. Union County, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Pass, Illinois Anna, Illinois Cobden, Illinois Dongola, Illinois Jonesboro, Illinois Mill Creek, Illinois Retrieved from "http:en.openei.orgwindex.php?titleUnionCounty,Il...

  18. President Obama's Final State of the Union - Energy Department...

    Office of Environmental Management (EM)

    President Obama's Final State of the Union - Energy Department Supercut Addthis From climate change to wind and solar power to electric vehicles, President Obama touched on a lot ...

  19. Non-trivial checks of novel consistency relations

    SciTech Connect (OSTI)

    Berezhiani, Lasha; Khoury, Justin; Wang, Junpu E-mail: jkhoury@sas.upenn.edu

    2014-06-01

    Single-field perturbations satisfy an infinite number of consistency relations constraining the squeezed limit of correlation functions at each order in the soft momentum. These can be understood as Ward identities for an infinite set of residual global symmetries, or equivalently as Slavnov-Taylor identities for spatial diffeomorphisms. In this paper, we perform a number of novel, non-trivial checks of the identities in the context of single field inflationary models with arbitrary sound speed. We focus for concreteness on identities involving 3-point functions with a soft external mode, and consider all possible scalar and tensor combinations for the hard-momentum modes. In all these cases, we check the consistency relations up to and including cubic order in the soft momentum. For this purpose, we compute for the first time the 3-point functions involving 2 scalars and 1 tensor, as well as 2 tensors and 1 scalar, for arbitrary sound speed.

  20. Removable check valve for use in a nuclear reactor

    DOE Patents [OSTI]

    Dunn, Charlton (Calabasas, CA); Gutzmann, Edward A. (Simi Valley, CA)

    1988-01-01

    A removable check valve for interconnecting the discharge duct of a pump and an inlet coolant duct of a reactor core in a pool-type nuclear reactor. A manifold assembly is provided having an outer periphery affixed to and in fluid communication with the discharge duct of the pump and has an inner periphery having at least one opening therethrough. A housing containing a check valve is located within the inner periphery of the manifold. The upper end of the housing has an opening in alignment with the opening in the manifold assembly, and seals are provided above and below the openings. The lower end of the housing is adapted for fluid communication with the inlet duct of the reactor core.

  1. 309 Facility deactivation and decommisioning Criteria Completion Check Lists

    SciTech Connect (OSTI)

    Cornwell, B.C.

    1996-02-01

    To facilitate and track completion of the 309 Facility turnover criteria completion an Applicability Matrix and Criteria Completion Check Lists were prepared. The applicability matrix documents the required turnover criteria for a given area in the facility or scope of work. The applicable criteria is selected for 16 different areas. For each area a completion checklist is provided to document completion of a requirement by WHC and the Environmental Restoration Contractor.

  2. Nuclear power in the Soviet Union

    SciTech Connect (OSTI)

    Ponomarev-Stepnoi, N.N.

    1989-01-01

    The pros and cons of nuclear power are similar in many countries, but the following pro factors are specific to the Soviet Union: the major sources of conventional fuel are in one area of the country, but energy consumption is concentrated in another; and a large portion of energy is generated using oil and gas. The arguments against nuclear power are as follows: safety requirements and expectations have been increased; and public opinion is negative. A program of nuclear power generation has been developed. New techniques are being implemented to increase safety and enhance operations of different types of nuclear power plants. Its should be obvious in the future that a nuclear power plant has better economic and environmental parameters than existing methods of power generation.

  3. DOE Roundtable Meeting with Union Leaders | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Roundtable Meeting with Union Leaders DOE Roundtable Meeting with Union Leaders Meeting Date: January 25, 2011 Documents Available for Download Meeting Agenda (67.16 KB) Meeting Summary and Participants (802.99 KB) More Documents & Publications DOE/Labor Leadership Roundtable Meeting DOE/Labor Leadership Roundtable Meeting

  4. Brooklyn Union`s award-winning phosphoric-acid fuel cell installation

    SciTech Connect (OSTI)

    Berry, C.

    1996-03-01

    Brooklyn Union has been involved with the development of commercial fuel cells since the late 1960s. In the early 1990`s, the ONSI Corporation began a limited first-of-its-kind production run of a 200-kW system. ONSI`s Model PC-25 remains the only commercially available on-site fuel cell system. Brooklyn Union is currently operating a PC-25 at St. Vincent`s Medical Center in Staten Island, NY. In December of 1989, Brooklyn Union signed a contract with ONSI for the purchase of one of the first PC-25s. Installation of this unit began in September 1992, and the system went on line in October. The system is operating at an electrical efficiency of 36.8% (based on higher heating value) with a combined thermal/electrical efficiency of nearly 71.5%. The thermal output of the fuel cell is being used for the production of domestic hot water for use in the hospital`s laundry. This paper describes the system and its performances to date.

  5. check list for those with one abnormal BeLPT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CHECK LIST FOR THOSE WHO HAVE HAD, OR WHO IN THE FUTURE HAVE, ONE ABNORMAL BeLPT _____ Fill out the EE-1 and EE-3 and include a copy of any abnormal BeLPT results that you have; review the EE-7 form. _____ Make a copy of the completed forms (one to keep for yourself). _____ Take the original copy of your forms (or mail them) to your nearest EEOICPA Resource Center. If you have already filed these forms, please do not fill them out again, just skip to the next item, below. _____ After you are

  6. Energy Management System Implementation … Do and Check

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    W3-3 Advanced Manufacturing Office eere.energy.gov ADVANCED MANUFACTURING OFFICE Energy Management System Implementation - Do and Check Ed Hardison Dorothy Atwood Deann Desai WC 4-26-12 W3-4 Advanced Manufacturing Office eere.energy.gov Hide and Show the GoToWebinar Panel Hide Show WC 4-26-12 W3-5 Advanced Manufacturing Office eere.energy.gov Type Questions WC 4-26-12 W3-6 Advanced Manufacturing Office eere.energy.gov Audio Selection WC 4-26-12 W3-7 Advanced Manufacturing Office eere.energy.gov

  7. File:Temporary storage plan review check list.pdf | Open Energy...

    Open Energy Info (EERE)

    Temporary storage plan review check list.pdf Jump to: navigation, search File File history File usage File:Temporary storage plan review check list.pdf Size of this preview: 463 ...

  8. NEW CREDENTIAL HELPS HOMES GET HEALTH AND SAFETY CHECK-UPS |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NEW CREDENTIAL HELPS HOMES GET HEALTH AND SAFETY CHECK-UPS NEW CREDENTIAL HELPS HOMES GET HEALTH AND SAFETY CHECK-UPS Logo of the Building Performance Institute. This spring, ...

  9. Secretary Chu Checks In on Biomass Pilot-Scale Facility | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Checks In on Biomass Pilot-Scale Facility Secretary Chu Checks In on Biomass Pilot-Scale Facility November 22, 2011 - 10:03am Addthis Secretary Steven Chu visited Kapolei, Hawaii, to check on the process of an integrated biorefinery project awarded $25 million through the Recovery Act to construct the facility. | Image courtesy of the Energy Department. Secretary Steven Chu visited Kapolei, Hawaii, to check on the process of an integrated biorefinery project awarded $25 million

  10. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Union Carbide in Nuclear Energy Note: Union Carbide Nuclear Division, which started out as Carbide and Carbon Chemicals Company, operated the Atomic Energy CommissionEnergy ...

  11. Cogeneration in the former Soviet Union

    SciTech Connect (OSTI)

    Horak, W.C.

    1997-07-01

    The former Soviet Union made a major commitment to Cogeneration. The scale and nature of this commitment created a system conceptually different from Cogeneration in the west. The differences were both in scale, in political commitment, and in socio economic impact. This paper addresses some of the largest scale Cogeneration programs, the technology, and the residual impact of these programs. The integration of the Cogeneration and nuclear programs is a key focus of the paper. Soviet designed nuclear power plants were designed to produce both electricity and heat for residential and industrial uses. Energy systems used to implement this design approach are discussed. The significant dependence on these units for heat created an urgent need for continued operation during the winter. Electricity and heat are also produced in nuclear weapons production facilities, as well as power plants. The Soviets also had designed, and initiated construction of a number of nuclear power plants {open_quotes}ATETs{close_quotes} optimized for production of heat as well as electricity. These were canceled.

  12. Union job fight boiling at DOE cleanup sites

    SciTech Connect (OSTI)

    Setzer, S.W.

    1993-11-15

    The US DOE is facing a growing jurisdictional dispute over which unions will perform the majority of clean-up work at its facilities. Unions affiliated with the AFL-CIO Metal Trades Council representing operations employees at the sites believe they have a fundamental right to work. Unions in the AFL-CIO's Building and Construction Trades Dept. insist that they have a clear mandate under federal labor law and the Davis-Bacon Act. The issue has heated up in recent weeks at the policy level and is boiling in a contentious dispute at DOE's Fernald site in Ohio.

  13. Union City, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Union City is a city in Alameda County, California. It falls under California's 13th congressional district.12...

  14. Union Suppo Battery Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Suppo Battery Co Ltd Jump to: navigation, search Name: Union Suppo Battery Co Ltd Place: Shenyang, China Zip: 110015 Product: Liaoning-based manufacturer of rechargeable NiMH...

  15. Union Light, Heat & Power Co | Open Energy Information

    Open Energy Info (EERE)

    Name: Union Light, Heat & Power Co Place: Kentucky References: Energy Information Administration.1 EIA Form 861 Data Utility Id 19446 This article is a stub. You can help OpenEI...

  16. Union Power Cooperative- Residential Energy Efficient Heat Pump Loan Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Union Power Cooperative offers low interest loans to help its qualifying residential customers finance new, energy-efficient heat pumps. Interest rates, currently at 9%, will be fixed for the term...

  17. Active Labor Unions Interfacing with DOE – June 2014

    Broader source: Energy.gov [DOE]

    This information book provides an overview of what has been learned through the interface with representative labor unions and related stakeholders as well as accomplishments and current efforts to address any identified areas of concern.

  18. Innovation and Energy at the State Of The Union

    Office of Energy Efficiency and Renewable Energy (EERE)

    A few of the First Lady's guests at the 2013 State of the Union hail from the fields of science, energy and innovation. Read more about these individuals and their remarkable accomplishments.

  19. Union Hill-Novelty Hill, Washington: Energy Resources | Open...

    Open Energy Info (EERE)

    help OpenEI by expanding it. Union Hill-Novelty Hill is a census-designated place in King County, Washington.1 References US Census Bureau 2005 Place to 2006 CBSA...

  20. Beijing ChangLi Union Energy Company | Open Energy Information

    Open Energy Info (EERE)

    Municipality, China Product: China-based technology company that research in zinc-air batteries (fuel cells). References: Beijing ChangLi Union Energy Company1 This article is a...

  1. Union City, New Jersey 07087 Dear Mayor Walter:

    Office of Legacy Management (LM)

    3715 Paisade Avenue - .*<;1 Union City, New Jersey 07087 Dear Mayor Walter: Secretary of Energy Hazel O'Leary has announced a new approach to openness in the Department of ...

  2. American Geophysical Union (AGU) meeting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Geophysical Union (AGU) meeting American Geophysical Union (AGU) meeting December 12, 2016 9:00AM EST to December 16, 2016 5:00PM EST Moscone Center San Francisco, California The AGU fall meeting is the largest worldwide conference in the geophysical science community attracting more than 24,000 earth and space scientists, educators, students and other leaders. For 46 years, energized and passionate earth and space scientists from around the world gather at the AGU fall meeting to

  3. Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union By Raphael Rosen September 18, 2015 Tweet Widget Google Plus One Share on Facebook (Photo by Photo Credit: Elle Starkman/PPPL Office of Communications) Amitava Bhattacharjee, head of the Theory Department at the Princeton Plasma Physics Laboratory (PPPL) and professor of astrophysical sciences at Princeton University, has been elected a fellow of the American Geophysical Union (AGU). The

  4. Comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

  5. State of the Union Remarks on Energy in Four Charts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Union Remarks on Energy in Four Charts State of the Union Remarks on Energy in Four Charts January 22, 2015 - 10:23am Addthis Daniel Wood Daniel Wood Data Visualization and Cartographic Specialist, Office of Public Affairs Sarah Gerrity Sarah Gerrity Former Multimedia Editor, Office of Public Affairs More State of the Union Coverage Interested in hearing the President's energy and climate change related remarks from the State of the Union? Watch the video! In Tuesday's State of the Union

  6. SU-D-BRD-04: The Impact of Automatic Radiation Therapy Plan Checks in Treatment Planning

    SciTech Connect (OSTI)

    Gopan, O; Yang, F; Ford, E

    2015-06-15

    Purpose: The physics plan check verifies various aspects of a treatment plan after dosimetrists have finished creating the plan. Some errors in the plan which are caught by the physics check could be caught earlier in the departmental workflow. The purpose of this project was to evaluate a plan checking script that can be run within the treatment planning system (TPS) by the dosimetrists prior to plan approval and export to the record and verify system. Methods: A script was created in the Pinnacle TPS to automatically check 15 aspects of a plan for clinical practice conformity. The script outputs a list of checks which the plan has passed and a list of checks which the plan has failed so that appropriate adjustments can be made. For this study, the script was run on a total of 108 plans: IMRT (46/108), VMAT (35/108) and SBRT (27/108). Results: Of the plans checked by the script, 77/108 (71%) failed at least one of the fifteen checks. IMRT plans resulted in more failed checks (91%) than VMAT (51%) or SBRT (63%), due to the high failure rate of an IMRT-specific check, which checks that no IMRT segment < 5 MU. The dose grid size and couch removal checks caught errors in 10% and 14% of all plans – errors that ultimately may have resulted in harm to the patient. Conclusion: Approximately three-fourths of the plans being examined contain errors that could be caught by dosimetrists running an automated script embedded in the TPS. The results of this study will improve the departmental workflow by cutting down on the number of plans that, due to these types of errors, necessitate re-planning and re-approval of plans, increase dosimetrist and physician workload and, in urgent cases, inconvenience patients by causing treatment delays.

  7. 5 Checks & 5 Tips for INCITE | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Checks & 5 Tips for INCITE Mira Computational Readiness Assessment ALCC Program Director's Discretionary (DD) Program ALCF Data Science Program INCITE 2016 Projects ALCC 2015 Projects ESP Projects View All Projects Publications ALCF Tech Reports Industry Collaborations 5 Checks & 5 Tips for INCITE How do you know if INCITE is right for your research? Your answers to these five questions may help you decide. Follow these five helpful tips as you complete your INCITE proposal. 5 Checks

  8. Checking Your Car's 4000 Welds is Serious Business. Scientists Just Made

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    it Easier. | Department of Energy Checking Your Car's 4000 Welds is Serious Business. Scientists Just Made it Easier. Checking Your Car's 4000 Welds is Serious Business. Scientists Just Made it Easier. March 4, 2015 - 10:45am Addthis Robotic welding is vital to auto manufacturing, but double checking the welds is done by hand. Infrared technology promises to make it a whole lot easier. | Photo by Ripley Engineering used with permission. Robotic welding is vital to auto manufacturing, but

  9. V-172: ISC BIND RUNTIME_CHECK Error Lets Remote Users Deny Service Against Recursive Resolvers

    Broader source: Energy.gov [DOE]

    A defect exists which allows an attacker to crash a BIND 9 recursive resolver with a RUNTIME_CHECK error in resolver.c

  10. Failure Modes and Causes for Swing and Lift Type Check Valves...

    Office of Scientific and Technical Information (OSTI)

    to the recent work performed by Oak Ridge National Laboratory (ORNL)relative to nuclear industry check valve performance, no information was readily available regarding the...

  11. The Do and Check Processes of an Energy Management System | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    design, and procurement. "Check" processes include measuring and monitoring, legal requirements, internal auditing, non-conformance (corrective and preventive), and records. ...

  12. January 20, 2011, HSS Union Focus Group Meeting - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0-11 HSS/Union Focus Group Meeting January 20, 2011 2:00 - 3:00 PM (EST) Call-in: 301-903-0617 Agenda * Opening Remarks [G. Podonsky] * 2011 Strategic Initiatives - Status/Next Steps Overview - Safety & Security Reform Status [B. Eckroade/S. Kirchhoff] - NAPA Worker Dialogue [MJ Campagnone] - Aging Workforce [M. Ardaiz] - Training Assessment Pilots [L. Gasperow/J. Lozoya] * Safety Concerns: Safety Culture [J. Frederick] - DOE/EFCOG ISMS Task Team Report [P. Worthington] * DOE/Union

  13. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS...

    Broader source: Energy.gov (indexed) [DOE]

    Union Working Group Meeting December 4, 2008 1:00 - 4:00 pm EST FORS 7E-069 SUBJECT: 2008 HSSUnion Topical Wrap Up Meeting Facilitation by 2008 Topical Union Leads Ron AultTom ...

  14. Join @Energy for the 2015 State of the Union Address | Department...

    Energy Savers [EERE]

    Join @Energy for the 2015 State of the Union Address Join @Energy for the 2015 State of the Union Address January 20, 2015 - 12:08pm Addthis Join us for live coverage of the State...

  15. Well devices with annulus check valve and hydraulic by-pass

    SciTech Connect (OSTI)

    Lawson, J.E.

    1984-05-22

    Hanger apparatus for suporting pipe in a well, the apparatus including both an annulus check valve, via which communication is established with the annulus between the suspended pipe and surrounding casing, and a pressure fluid by-pass, via which communication with a down-hole device such as a safety valve is established. Opening of the check valve and establishment of communication via the by-pass are accomplished by a simple stabbing operation with, e.g., a handling tool or a production upper body. Alternately, the check valve is opened by hydraulic pressure delivered via the production upper body.

  16. Crops, Bots and Bytes: Check Out the Robots Behind ARPA-E's Agro-Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Program | Department of Energy Crops, Bots and Bytes: Check Out the Robots Behind ARPA-E's Agro-Energy Program Crops, Bots and Bytes: Check Out the Robots Behind ARPA-E's Agro-Energy Program June 9, 2016 - 5:02pm Addthis Crops, Bots and Bytes: Check Out the Robots Behind ARPA-E’s Agro-Energy Program Biofuels have huge potential as a low-carbon alternative to fossil fuels for transportation. But farming crops for biofuel takes land, fresh water and other resources that are increasingly

  17. Design and Testing of Vacuum Breaker Check Valve for Simplified Boiling Water Reactor

    SciTech Connect (OSTI)

    Ishii, M.; Xu, Y.; Revankar, S.T.

    2002-07-01

    A new design of the vacuum breaker check valve was developed to replace the mechanical valve in a simplified boiling water reactor. Scaling and design calculations were performed to obtain the geometry of new passive hydraulic vacuum breaker check valve. In order to check the valve performance, a RELAP5 model of the simplified boiling water reactor system with the new valve was developed. The valve was implemented in an integral facility, PUMA and was tested for large break loss of coolant accident. (authors)

  18. New Mars rover findings revealed at American Geophysical Union...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... the area "Marias Pass," where a lower geological unit contacts an overlying one. ... identification of drilled rock-powder samples analyzed by the Chemistry and Mineralogy ...

  19. Brooklyn Union develops tool for replacing steel, cast iron mains

    SciTech Connect (OSTI)

    Marazzo, J.J. )

    1994-12-01

    Over the last 10 years, Brooklyn Union Gas Co. has undergone significant changes in the methods it has used to install gas service and gas main systems. Recently, Brooklyn Union engineers developed a user friendly method of replacing steel and cast iron gas mains and service lines with same size or larger polyethylene pipe without using conventional trench excavation. The system, known as the ''Bullet'' pipe replacement system, involves splitting steel and cast iron pipe using a series of rolling cutter wheels. After consecutive cutting wheels completely penetrate both pipe and fittings, both pipe and soil are spread with an expander and new polyethylene pipe is inserted. The ''Bullet'' pipe splitting system for 1[1/4] in. (32 mm) through 6 in. (150 mm) diameter has been developed.

  20. Energy Savings Tips on the Go: Check Out the New Energy Savers...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Go: Check Out the New Energy Savers Mobile Site March 16, 2012 - 12:46pm Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For years, many of...

  1. April 30, 2008; HSS/Union Working Group Meeting to address training - Executive Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HSS/UNION MEETING TO ADDRESS TRAINING INTEGRATED EXECUTIVE SUMMARY AND FINAL ACTION LIST HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified issues by topical area. The following is a synthesis of actions/activities identified in the April 30 HSS/Union meeting to address training issues with focus in the areas of the development of DOE-wide HAMMER

  2. Sandians Participate in 46th Annual American Geophysical Union (AGU)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conference Participate in 46th Annual American Geophysical Union (AGU) Conference - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing

  3. EERE Success Story—Iowa: West Union Green Transformation Project

    Broader source: Energy.gov [DOE]

    The City of West Union, Iowa, installed a closed-circuit geothermal heating and cooling system designed to heat and cool 330,000 square feet of mixed used space in the downtown area, including 80% of the 60 downtown buildings. The city also set up a system of mini-grants for downtown businesses to help defray the costs of weatherizing their buildings and connecting to the system.

  4. Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union By Raphael Rosen September 18, 2015 Tweet Widget Google Plus One Share on Facebook PPPL Physicist Amitava Bhattacharjee (Photo by Elle Starkman) PPPL Physicist Amitava Bhattacharjee Amitava Bhattacharjee, head of the Theory Department at the Princeton Plasma Physics Laboratory (PPPL) and professor of astrophysical sciences at Princeton University, has been elected a fellow of the American

  5. Management system saves Brooklyn Union $1 million/year

    SciTech Connect (OSTI)

    1995-04-01

    This paper reviews the information system developed for Brooklyn Union Gas Co. to reduce staff and improve performance in its utility business. It reviews the hardware systems and software codes to manage the various geographical information. The system runs UNIX-based CAD software. The paper also reviews the networking of the various information systems and the ability to interact with both PC and workstation components.

  6. FOR OFFICIAL USE ONLY FOR OFFICIAL USE ONLY CRIMINAL BACKGROUND CHECK INFORMATION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ONLY FOR OFFICIAL USE ONLY CRIMINAL BACKGROUND CHECK INFORMATION ENSURE DATA IS LEGIBLE AND COMPLETE, THIS FORM MUST BE COMPLETED BY APPLICANT LAST NAME: FIRST NAME, MIDDLE INITIAL: SSN: DOB: RACE: SEX: EYES: HT: WT: ADDRESS, CITY, AND ZIP: US CITIZENSHIP: YES NO DRIVER'S LICENSE NUMBER AND STATE OF ISSUE: AGE 18 OR OVER: YES NO EMPLOYER: Any Alias: I authorize the use of and release of my personal information to KIRTLAND AFB, NM, to accomplish a National criminal background check. I understand

  7. Rotary union for use with ultrasonic thickness measuring probe

    DOE Patents [OSTI]

    Nachbar, Henry D.

    1992-01-01

    A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body.

  8. Rotary union for use with ultrasonic thickness measuring probe

    DOE Patents [OSTI]

    Nachbar, H.D.

    1992-09-15

    A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body. 5 figs.

  9. Peptide identification

    DOE Patents [OSTI]

    Jarman, Kristin H [Richland, WA; Cannon, William R [Richland, WA; Jarman, Kenneth D [Richland, WA; Heredia-Langner, Alejandro [Richland, WA

    2011-07-12

    Peptides are identified from a list of candidates using collision-induced dissociation tandem mass spectrometry data. A probabilistic model for the occurrence of spectral peaks corresponding to frequently observed partial peptide fragment ions is applied. As part of the identification procedure, a probability score is produced that indicates the likelihood of any given candidate being the correct match. The statistical significance of the score is known without necessarily having reference to the actual identity of the peptide. In one form of the invention, a genetic algorithm is applied to candidate peptides using an objective function that takes into account the number of shifted peaks appearing in the candidate spectrum relative to the test spectrum.

  10. Planning for a Sustainable Future of the Cincinnati Union Terminal

    SciTech Connect (OSTI)

    2012-04-30

    The Cincinnati Museum Center invited a number of local stakeholders, political leaders, nationally and internationally recognized design professionals and the Design Team, that has been engaged to help shape the future of this remarkable resource, to work together in a Workshop that would begin to shape a truly sustainable future for both the Museum and its home, the Union Terminal, one of the most significant buildings in America. This report summarizes and highlights the discussions that took place during the Workshop and presents recommendations for shaping a direction and a framework for the future.

  11. Compreshensive industry poll sparks ideas on new push for GAS check

    SciTech Connect (OSTI)

    Not Available

    1991-02-01

    This paper provides a comprehensive survey of active participants, inactive participants, and non-participants in the GAS Check program which served as the focus of considerable discussion at a recent GAS Check Committee meeting in Oak Brook, Ill. In an effort to encourage greater involvement in the program by marketers and consumers alike, committee members voted to undertake a number of important activities now and in the near future. These actions include: Contacting homeowners' insurance companies (through their national association, if applicable) regarding possible discounts or other incentives that would encourage policyholders to participate in GAS Check. NPGA's desire to obtain insurance company endorsement arose from the finding that many homeowners are simply not interested in the program.

  12. Cooperation with the New Independent States of the Former Soviet Union |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Cooperation with the New Independent States of the Former Soviet Union Cooperation with the New Independent States of the Former Soviet Union The following Acquisition Letter 95-14 includes the terms and conditions (both intellectual property and non-intellectual property) that are to be used in subcontracts between DOE national laboratories and institutes in the New Independent States of the Former Soviet Union (NIS). There are two patent and data clauses - one for the

  13. High Temperature Fuel Cells in the European Union | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Cells in the European Union High Temperature Fuel Cells in the European Union Presentation on High Temperature Fuel Cells in the European Union to the High Temperature Membrane Working Group, May 25, 2004 in Philadelphia, PA. euhvh_philadelphia.pdf (1.38 MB) More Documents & Publications CARISMA: A Networking Project for High Temperature PEMFC MEA Activities in Europe Evaluating Exhaust Emission Performance of Urban Buses Using Transient Heavy-Duty Chassis Dynamometer Membrane Development

  14. Watch Energy Highlights from the 2016 State of the Union | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy 2016 State of the Union Watch Energy Highlights from the 2016 State of the Union January 13, 2016 - 3:19pm Addthis Watch the Energy highlights from President Obama's final State of the Union delivered January 12, 2016. | Video by Simon Edelman, Energy Department. Simon Edelman Simon Edelman Chief Creative Officer Allison Lantero Allison Lantero Digital Content Specialist, Office of Public Affairs From climate change to wind and solar power to electric vehicles, President Obama touched

  15. TONIGHT: @Energy Livetweets the State of the Union 2013 | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy Stay tuned as we livetweet the President's annual State of the Union Address later this evening. | Graphic by Sarah Gerrity, Energy Department. Stay tuned as we livetweet the President's annual State of the Union Address later this evening. | Graphic by Sarah Gerrity, Energy Department. Erin R. Pierce Erin R. Pierce Former Digital Communications Specialist, Office of Public Affairs How can I participate? Watch an enhanced live broadcast of the State of the Union at http://wh.gov/sotu.

  16. President Obama Praises NAMII in State of the Union Address | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy President Obama Praises NAMII in State of the Union Address President Obama Praises NAMII in State of the Union Address October 10, 2013 - 12:03pm Addthis A view of additive manufacturing machines at the NAMII facility in Youngstown, Ohio. Photo credit: National Additive Manufacturing Institute. A view of additive manufacturing machines at the NAMII facility in Youngstown, Ohio. Photo credit: National Additive Manufacturing Institute. In his 2013 State of the Union address, President

  17. Tank 30 and 37 Supernatant Sample Cross-Check and Evaporator Feed Qualification Analysis-2012

    SciTech Connect (OSTI)

    Oji, L. N.

    2013-03-07

    This report summarizes the analytical data reported by the F/H and Savannah River National Laboratories for the 2012 cross-check analysis for high level waste supernatant liquid samples from SRS Tanks 30 and 37. The intent of this Tank 30 and 37 sample analyses was to perform cross-checks against routine F/H Laboratory analyses (corrosion and evaporator feed qualification programs) using samples collected at the same time from both tanks as well as split samples from the tanks.

  18. Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site Energy Savings Tips on the Go: Check Out the New Energy Savers Mobile Site March 16, 2012 - 12:46pm Addthis Chris Stewart Senior Communicator at DOE's National Renewable Energy Laboratory For years, many of you have found energy-saving tips about how to save money and energy at home, in your vehicle, and at work on our EnergySavers desktop site. This month, we launched a new Energy Savers mobile

  19. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Assessing Training Gaps in ORPS

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Training Gaps Using DOE's Occurrence Reporting and Processing System (ORPS) HSS/Union Meeting June 11, 2009 2 Highlights Training is a contributing cause in about 15% of DOE operational events (about 150 per year) * Poor management practices are the most common training cause * Poor training programs are next (cited about 50 times per year) Of ORPS-reported injuries, about 17% had training as a contributing cause (101 of 594) * About 30 per year HS-30 will develop a report with a few more

  20. Brooklyn Union strategy: Re-engineering from outside in

    SciTech Connect (OSTI)

    Parker, W.P. Jr.

    1997-04-01

    Five years ago, the management at Brooklyn Union embarked on a long, hard look at the way the company conducted business. In effect, they stepped into their customers` shoes. Business Process Improvement (BPI) is designed to construct a lasting corporate culture that can help Brooklyn Union meet its stated goal of becoming the premier energy company in the Northeast. A major component of that culture involves a dedication to service and cost management that is as solid as their credit ratings. To date, the bottom line on BPI has been impressive: By 1995, the customer satisfaction rating, which had been hovering in the `80s, had shot up to 95%. The management commitment has come in the form of resources, and a willingness to put its money where its mouth is (rewards for performance). The employee buy-in has shown up in those outstanding ratings from customers and in the financial results. Changing the culture of any long-established entity is never easy, whether it be on the micro-level (a family, for instance) of the macro-level (a country). It involves issues of trust, and a certain leap of faith that the new approach will bring results. Communication and education are two of the keys to gaining that participation. The company was able to impress upon employees the need for change--in particular the need for them to begin thinking like customers. The paper discusses the implementation of this re-engineering strategy.

  1. A look back at Union Carbides first 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Laboratory Note: Union Carbide Nuclear Division, which started out as Carbide and Carbon Chemicals Company, operated the Atomic Energy CommissionEnergy Research and Development ...

  2. A look back at Union Carbides [first] 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    first 20 Years in Nuclear Energy The Gaseous Diffusion Plants Note: Union Carbide Nuclear Division, which started out as Carbide and Carbon Chemicals Company, operated the...

  3. September 8, 2011, HSS/Union Focus Group Work Group Telecom ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    provides a forum for communication and collaboration related to worker health, safety and security among HSS management and staff, labor unions, DOE Programs and stakeholders. ...

  4. Join @Energy for the 2016 State of the Union Address | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    @Energy for the 2016 State of the Union Address Join @Energy for the 2016 State of the Union Address January 11, 2016 - 11:10am Addthis Join us for live coverage of the State of the Union, starting at 9PM ET on Tuesday. | Image courtesy of Carly Wilkins. Join us for live coverage of the State of the Union, starting at 9PM ET on Tuesday. | Image courtesy of Carly Wilkins. Allison Lantero Allison Lantero Digital Content Specialist, Office of Public Affairs How can I participate? Follow along with

  5. Union zur F rderung von Oel und Proteinpflanzen Ufop | Open Energy...

    Open Energy Info (EERE)

    zur F rderung von Oel und Proteinpflanzen Ufop Jump to: navigation, search Name: Union zur Frderung von Oel- und Proteinpflanzen (Ufop) Place: Germany Product: Germany-based...

  6. Join Energy.gov at the 2014 State of the Union | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy.gov at the 2014 State of the Union Join Energy.gov at the 2014 State of the Union January 28, 2014 - 11:23am Addthis Join Energy.gov tonight as we livetweet about all the major energy points in the President's State of the Union address. | Graphic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Join Energy.gov tonight as we livetweet about all the major energy points in the President's State of the Union address. | Graphic by Sarah Gerrity, Energy

  7. April 30, 2008; HSS/Union Working Group Meeting to address training...

    Office of Environmental Management (EM)

    ... Typical Training Classes z Crisis Management z Emergency Planning & Response z Disaster Site ... signatory recognized some of the problems facing the non- union sector in terms ...

  8. Assigning unique identification numbers to new user accounts and groups in a computing environment with multiple registries

    DOE Patents [OSTI]

    DeRobertis, Christopher V.; Lu, Yantian T.

    2010-02-23

    A method, system, and program storage device for creating a new user account or user group with a unique identification number in a computing environment having multiple user registries is provided. In response to receiving a command to create a new user account or user group, an operating system of a clustered computing environment automatically checks multiple registries configured for the operating system to determine whether a candidate identification number for the new user account or user group has been assigned already to one or more existing user accounts or groups, respectively. The operating system automatically assigns the candidate identification number to the new user account or user group created in a target user registry if the checking indicates that the candidate identification number has not been assigned already to any of the existing user accounts or user groups, respectively.

  9. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Diagnostic In-Vessel Electrical system Engineering Diagnostic In-Vessel Electrical system Engineering IDM UID TMWPFQ VERSION CREATED ON / VERSION / STATUS 05 Aug 2016 / 1.0 / Approved EXTERNAL REFERENCE / VERSION Page 1 of 6 Table of Contents 1 PURPOSE

  10. Union Pacific Railroad`s LNG locomotive test program

    SciTech Connect (OSTI)

    Grimaila, B.

    1995-12-31

    Union Pacific Railroad is testing LNG in six locomotives through 1997 to determine if the liquefied natural gas technology is right for them. Two of the six LNG test locomotives are switch, or yard, locomotives. These 1,350 horsepower locomotives are the industry`s first locomotives totally fueled by natural gas. They`re being tested in the yard in the Los Angeles area. The other four locomotives are long-haul locomotives fueled by two tenders. These units are duel-fueled, operating on a mixture of LNG and diesel and are being tested primarily on the Los Angeles to North Platte, Nebraska corridor. All the information concerning locomotive emissions, locomotive performance, maintenance requirements, the overall LNG system design and the economic feasibility of the project will be analyzed to determine if UPR should expand, or abandon, the LNG technology.

  11. Reliability of excess-flow check-valves in turbine lubrication systems

    SciTech Connect (OSTI)

    Dundas, R.E.

    1996-12-31

    Reliability studies on excess-flow check valves installed in a gas turbine lubrication system for prevention of spray fires subsequent to fracture or separation of lube lines were conducted. Fault-tree analyses are presented for the case of failure of a valve to close when called upon by separation of a downstream line, as well as for the case of accidental closure during normal operation, leading to interruption of lubricating oil flow to a bearing. The probabilities of either of these occurrences are evaluated. The results of a statistical analysis of accidental closure of excess-flow check valves in commercial airplanes in the period 1986--91 are also given, as well as a summary of reliability studies on the use of these valves in residential gas installations, conducted under the sponsorship of the Gas Research Institute.

  12. November 6, 2008; HSS/Union Working Group Meeting on Aging Workforce/Strategic Initiatives - Meeting Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aging Workforce and Strategic Initiatives November 6, 2008 Integrated Executive Summary and Final Action List Background: HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified health and safety issues by topical area. The following is an overview of actions/activities identified in the November 6 HSS/Union meeting to address DOE and interrelated

  13. RFEDSCHK User's Manual (The RFEDS Lab Data Check routine), Environmental and Scientific Systems Information Resources: Version 1. 00

    SciTech Connect (OSTI)

    Not Available

    1992-05-01

    The RFEDS Laboratory Data Check routine (RFEDSCHK) preforms checks of the off-site laboratory data to identify missing and/or incorrect data which may exist. The check routine is designed to assist the laboratories to correct deficiencies contained in the data before it is sent to the Rocky Flats Environmental Management Department, there-by improving the quality of the data being placed in RFEDS. If the data passes the checks with no errors, the data will be acceptable for placement into RFEDS and delivery of the electronic data to EG G is appropriate. If errors are detected, the laboratory should correct the errors and perform the check again until the data is free of errors.

  14. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 May 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Mechanical and system engineering analysis for Diagnostics Magnetics systems This document describes technical needs for mechanical and system engineering analysis for ITER magnetic diagnostics systems. IDM UID T2CKM7 VERSION CREATED ON / VERSION / STATUS 29 Apr 2016 / 1.0 / Approved EXTERNAL REFERENCE / VERSION ITER_D_T2CKM7 Page 1 of 7 Table of

  15. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Technical specifications_Neutron Diagnostics project integration This document describes technical needs of ITER/TED/PPD Diagnostics Division, with particular reference to the requirement for engineering expertise for the Neutron Diagnostics project, integration and follow up activities, as appropriate. IDM UID TLA2Z4 VERSION CREATED ON / VERSION /

  16. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) RAMI Analysis for the Diagnostics systems The contract covers the following tasks (see details in Section 7 and 9): Determination of the electronics Quality Class (QC) and RAMI-based mitigation to achieve QC-3 for the electronics;Update of the RAMI analyses of ITER diagnostic systems, ports, port components and integrated assembly;Resolution of the

  17. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Design Justification and Engineering Validation Work_Technical specifications This document describes the technical needs for specialists in engineering of Diagnostics. Specifically the technical needs of the Diagnostics Division with particular reference to Design Justification and Engineering Validation Work. ITER is a major new device that is under

  18. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) PLM Project. Framework Contract for Engineering Support This document define theoverall frame andrequirements for engineering service contracts in order to support ITER Organization Central Team (IO-CT) in the implementation the PLM project. IDM UID SSZSGR VERSION CREATED ON / VERSION / STATUS 07 Jul 2016 / 1.3 / Approved EXTERNAL REFERENCE / VERSION

  19. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Jul 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specification Summary Technical Specification - Requirement Management Framework Contract The following document provides the basic requirements to initiate the procurement of Requirement Management Services as part of a Call For Tender Process. Approval Process Name Action Affiliation Author Guigon A. 29 Jul 2016:signed IO/DG/COO/CIO/CMD Co-Authors Larrea J. 29 Jul 2016:signed

  20. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Aug 2016 DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM Technical Specifications (In-Cash Procurement) Technical Summary for Call for Nomination - TPI Supervision and Inspection Services Contract This Call for Nomination is to seek companies interested in participating in the tender for the Quality Control Inspection services contract. This technical summary provides requirements for Supplier of inspections services and Quality Control supervision tasks

  1. Exploration Of Activity Measurements And Equilibrium Checks For Sediment Dating Using Thick-Window Germanium Detectors

    SciTech Connect (OSTI)

    Warner, Jacob A.; Gladkis, Laura G.; Timmers, Heiko; Fitzsimmons, Kathryn E.; Reynolds, Eva M.

    2011-06-01

    Activity measurements on sediment samples for trapped-charge geological dating using gamma-ray spectroscopy are an important verification of the field-site dose rate determination. Furthermore gamma-ray spectroscopy can check if the natural decay series are in secular equilibrium which is a crucial assumption in such dating. Typically the activities of leading members of the Thorium and Uranium decay series are measured, which requires Germanium detectors with thin windows and good energy resolution in order to effectively detect the associated low energy gamma-rays. Such equipment is not always readily available. The potential of conventional Germanium detectors with thick entrance window has been explored towards routine gamma-ray spectroscopy of sediment samples using higher energy gamma-rays. Alternative isotopes, such as Ac-228 and Pb-212 for the Thorium series, and Pa-234m, Ra-226 and Bi-214 for the Uranium series, have been measured in order to determine the mass-specific activity for the respective series and possibly provide a check of secular equilibrium. In addition to measurements of the K-40 activity, with the alternative approach, the activities of both decay series can be accurately determined. The secular equilibrium condition may be tested for the Thorium series. Measurement accuracy for Pa-234m is, however, not sufficient to permit also a reliable check of equilibrium for the Uranium series.

  2. Watch Energy Highlights from the State of the Union | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State of the Union Watch Energy Highlights from the State of the Union January 21, 2015 - 11:46am Addthis Matty Greene Matty Greene Former Videographer From low gas prices to growth in renewable energy sources like wind and solar, energy featured prominently in President Obama's sixth State of the Union address last night. From the way we produce energy to how we use it in our homes and businesses, the President laid out key ways that he plans to fight climate change and build the clean energy

  3. In Charlotte, Senior DOE Official to Amplify State of the Union...

    Energy Savers [EERE]

    Give Drivers More Options at the Pump In Charlotte, Senior DOE Official to Amplify State of the Union, Call to Give Drivers More Options at the Pump February 5, 2014 - 12:30pm ...

  4. Pollution Prevention Plan for the Y-12 Analytical Chemistry Organization Off-Site Union Valley Facility

    SciTech Connect (OSTI)

    Jackson, J. G.

    2010-03-01

    The Y-12 Analytical Chemistry Organization (ACO) Off-Site Union Valley Facility (Union Valley Facility) is managed by Babcock and Wilcox Technical Services Y-12, L.L.C. (B and W Y-12) through the Y-12 National Security Complex organization. Accordingly, the Y-12 Pollution Prevention Program encompasses the operations conducted at the Union Valley Facility. The Y-12 Program is designed to fully comply with state, federal and U.S. Department of Energy (DOE) requirements concerning waste minimization/pollution prevention as documented in the Y-12 Pollution Prevention Program Plan. The Program is formulated to reduce the generation and toxicity of all Y-12 wastes in all media, including those wastes generated by the Union Valley Facility operations. All regulatory and DOE requirements are met by the Y-12 Program Plan.

  5. September 8, 2011, HSS/Union Focus Group Work Group Telecom ...

    Energy Savers [EERE]

    The following outlines the union WG lead and co-lead volunteers for each of the Work Groups: 10 CFR 851: Doug Stephens (USW) - Lead; Barb McCabe (IUOE) - Co-Lead Training: Pete ...

  6. Fuxin Union Wind Power Co Ltd formerly known as Liaoning Zhangwu...

    Open Energy Info (EERE)

    Wind Power Co Ltd formerly known as Liaoning Zhangwu Xiehe Wind Power Co Ltd Jump to: navigation, search Name: Fuxin Union Wind Power Co Ltd (formerly known as Liaoning Zhangwu...

  7. Production of greenhouse gases in the former Soviet Union

    SciTech Connect (OSTI)

    Kolchugina, T.P.; Vinson, T.S. . Civil Engineering Dept.)

    1994-09-01

    The former Soviet Union (FSU) was the largest country in the world and was one of the greatest emitters of greenhouse gases to the atmosphere. At the end of the 1980s and the beginning of the 1990s the CO[sub 2] emissions for the FSU amounted to 1.46 Pg C yr[sup [minus]1] (Pg = 10[sup 15] g). Total CH[sub 4] emissions for the FSU were 55.8 Tg C yr[sup [minus]1] (Tg = 10[sup 12] g) or approximately one-third of the global CH[sub 4] emissions; 53% of the FSU CH[sub 4] emissions was contributed by peatlands. Emissions of CFCs were 67 Gg yr[sup [minus]1] (Gg = 10[sup 9] g) and comprised 12% of the global CFCs emissions. The forest sector was a net sink for 0.48 Pg C yr[sup [minus]1] of atmospheric carbon, offsetting approximately one-half of the CO[sub 2] emissions from industrial processes. FSU peatlands accumulated 52 Tg C yr[sup [minus]1], but overall they were a net source of 48 Tg C yr[sup [minus]1] to the atmosphere considering utilization of peat. The net CO[sub 2] emissions of the FSU were 0.68 Pg C yr[sup [minus]1]. The FSU and China shared the fifth and sixth places in the world ranking of net CO[sub 2] emissions. The FSU and European countries shared the fourth and fifth places in the world ranking of net CO[sub 2] emissions per capita.

  8. The European Union's emissions trading system in perspective

    SciTech Connect (OSTI)

    A. Denny Ellerman; Paul L. Joskow

    2008-05-15

    The performance of the European Union's Emissions Trading System (EU ETS) to date cannot be evaluated without recognizing that the first three years from 2005 through 2007 constituted a 'trial' period and understanding what this trial period was supposed to accomplish. Its primary goal was to develop the infrastructure and to provide the experience that would enable the successful use of a cap-and-trade system to limit European GHG emissions during a second trading period, 2008-12, corresponding to the first commitment period of the Kyoto Protocol. The trial period was a rehearsal for the later more serious engagement and it was never intended to achieve significant reductions in CO{sub 2} emissions in only three years. In light of the speed with which the program was developed, the many sovereign countries involved, the need to develop the necessary data, information dissemination, compliance and market institutions, and the lack of extensive experience with emissions trading in Europe, we think that the system has performed surprisingly well. Although there have been plenty of rough edges, a transparent and widely accepted price for tradable CO{sub 2} emission allowances emerged by January 1, 2005, a functioning market for allowances has developed quickly and effortlessly without any prodding by the Commission or member state governments, the cap-and-trade infrastructure of market institutions, registries, monitoring, reporting and verification is in place, and a significant segment of European industry is incorporating the price of CO{sub 2} emissions into their daily production decisions. The development of the EU ETS and the experience with the trial period provides a number of useful lessons for the U.S. and other countries. 27 refs., 7 figs., 5 tabs.

  9. President Bush Highlights Energy in the State of the Union Address |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Highlights Energy in the State of the Union Address President Bush Highlights Energy in the State of the Union Address February 3, 2005 - 10:01am Addthis "To keep our economy growing, we also need reliable supplies of affordable, environmentally responsible energy. Nearly four years ago, I submitted a comprehensive energy strategy that encourages conservation, alternative sources, a modernized electricity grid, and more production here at home -- including safe,

  10. Retrofit of the Local 150 of International Union of Operating Engineers |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Retrofit of the Local 150 of International Union of Operating Engineers Retrofit of the Local 150 of International Union of Operating Engineers Project objectives: Demonstrate the reduced first cost impact of smart geothermal design and technology. Demonstrate smart geothermal innovations in system efficiency, especially in the building-earth interaction. Demonstrate an economical and repeatable approach to district, hybrid retrofit GHP systems.

  11. FIA-16-0036 - In the Matter of International Union of Operating Engineers,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Local 370 | Department of Energy 6 - In the Matter of International Union of Operating Engineers, Local 370 FIA-16-0036 - In the Matter of International Union of Operating Engineers, Local 370 On July 7, 2016, OHA issued a decision denying an Appeal from a FOIA determination issued by the Richland Operations Office (ROO). In its determination, the ROO released one document, a spreadsheet containing badge information for employees of a subcontractor at the Hanford Site. However, the ROO also

  12. November 17, 2009 HSS/Union Lead Checkpoint Meeting on Integrated Collaborative Oversight - Accomplishments Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    November 17, 2008 2009 Priority Activities Accomplishments/Path Forward Overview Training Assessments Accomplishments: * HSS (NTC)/NIEHS/Union Collaboration - Completed Safety Training Workshop for the Oak Ridge Office (ORO) and the Y-12 Site Office (YSO) in July, 2009 - Over 50 attendees participated including representatives from Federal, contractor and union organizations (local and international) - ORO/YSO Safety Training Workshop Report completed and provided to ORO/YSO management -

  13. May 19, 2011, HSS/Union Focus Group Meeting - Summary and Participants

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - Final Draft 07-11-11 HSS Focus Group May 19 Teleconference with Union Representatives Reconciliation of HSS/Union Work Groups MEETING DISCUSSION Glenn Podonsky, Chief Health, Safety and Security Officer - Opening Remarks: * DOE Administration's strategic goals are supported by continued focus on national prosperity and security through energy, environmental, nuclear and science and technology advancement solutions. * Melvin Williams is recently appointed in the new position of Associate Deputy

  14. April 30, 2008; HSS/Union Working Group Meeting to address training … Meeting Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    * * training. * area discussed. Center (NTC) National Training Center. * * * Conduct of Meeting. A 1. 2. 3. 4. HAMMER. HSS/UNION MEETING TO ADDRESS TRAINING DRAFT MEETING SUMMARY Introductory Remarks. Glenn Podonsky made the following points: More than a dialogue, the intent of HSS is to participate in a productive manner, to develop working relationships with the unions, to work the issues, identify actions, and institutionalize a process for addressing and resolving issues to improve worker

  15. April 30, 2008; HSS/Union Working Group Meeting, Training - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -28-08 Draft HSS/Union Working Group Meeting April 30, 2008 1:00 - 3:00 pm EST FORS 7E-069 Call-in: 301-903-6495 SUBJECT: TRAINING Union Working Group Sheet Metal Workers International Association (SMWIA) - Lead Metal Trades Department AFL-CIO Building and Construction Trades Department Center for Construction Research & Training (BCTD CPWR) Operative Plasterers' & Cement Masons' International Association (OPCMIA) International Association of Fire Fighters (IAFF) International Guards

  16. In Texas, Energy Sec. Moniz to Echo President's State of the Union Call

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Foster Advanced Manufacturing and Innovation | Department of Energy Energy Sec. Moniz to Echo President's State of the Union Call to Foster Advanced Manufacturing and Innovation In Texas, Energy Sec. Moniz to Echo President's State of the Union Call to Foster Advanced Manufacturing and Innovation February 4, 2014 - 4:00pm Addthis News Media Contact (202) 586-4940 WASHINGTON - On Thursday, February 6, Secretary of Energy Ernest Moniz will travel to Austin and San Antonio, Texas to

  17. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6-24-08 Draft HSS/Union Working Group Meeting July 17, 2008 1:00 - 4:00 pm EST FORS 7E-069 Call-in: 301-903-9197 SUBJECT: SAFETY STANDARDS / 10 CFR 851 Core Union Working Groups Safety Standards: Metal Trades Department AFL-CIO - Lead International Brotherhood of Electrical Workers (IBEW) Operative Plasterers' & Cement Masons' International Association (OPCMIA) 10 CFR 851: United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International

  18. DISCLAIMER : UNCONTROLLED WHEN PRINTED - PLEASE CHECK THE STATUS OF THE DOCUMENT IN IDM

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Physics Modelling and Analysis expertise on CXRS Diagnostic The work described below is related to the Physics Modelling and Analysis expertise of the ITER CXRS Diagnostics: 55.E1 CXRS Core, 55.EC CXRS Edge and 55.EF CXRS Pedestal. The 3 diagnostics are being developed by 3 IO-DA's (respectively EU-DA, RF-DA and IN- DA). However, to support the diagnostic development input of CXRS spectral modelling is required, that needs to be cross checked against existing Fusion experiments. Moreover,

  19. CNS, labor union donate $15,000 to local March of Dimes | Y-12...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2015 - 4:07pm At a recent kickoff luncheon, Y-12 Site Manager Bill Tindal (right) and Kimberly Mitchell of the Atomic Trades and Labor Council (left) gave a 15,000 check to Susie...

  20. Apparatus for checking the direction of polarization of shear-wave ultrasonic transducers

    DOE Patents [OSTI]

    Karplus, H.H.B.; Forster, G.A.

    An apparatus for checking the direction of polarization of shear-wave ultrasonic transducers comprises a first planar surface for mounting the shear-wave transducer, a second planar surface inclined at a predetermined angle to the first surface to generate longitudinal waves by mode conversion, and a third planar surface disposed at a second predetermined angle to the first for mounting a longitudinal-wave ultransonic transducer. In an alternate embodiment, two second planar surfaces at the predetermined angle are placed at an angle to each other. The magnitude of the shear wave is a function of the angle between the direction of polarization of the transducer and the mode-conversion surface.

  1. Apparatus for checking the direction of polarization of shear-wave ultrasonic transducers

    DOE Patents [OSTI]

    Karplus, Henry H. B.

    1980-01-01

    An apparatus for checking the direction of polarization of shear-wave ultrasonic transducers comprises a first planar surface for mounting the shear-wave transducer, a second planar surface inclined at a predetermined angle to the first surface to generate longitudinal waves by mode conversion, and a third planar surface disposed at a second predetermined angle to the first for mounting a longitudinal-wave ultrasonic transducer. In an alternate embodiment, two second planar surfaces at the predetermined angle are placed at an angle to each other. The magnitude of the shear wave is a function of the angle between the direction of polarization of the transducer and the mode-conversion surface.

  2. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 … Meeting Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 CFR 851 and DOE Safety Standards Implementation July 17, 2008 Integrated Executive Summary and Final Action List HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified health and safety issues by topical area. The following is an overview of actions/activities identified in the July 17 HSS/Union meeting to address 851 Rule and DOE Safety Standards

  3. Spectral Identification Inference Engine

    Energy Science and Technology Software Center (OSTI)

    2004-07-27

    The software interprets spectra (mass spectra, ion mobility spectra, etc.) using a method that mimics how an expert human analyst would perform the interpretation. Because spectra can be described linguistically (e.g. peak X must be large and peak y must be small), their description can be reduced to rules using fuzzy logic. Therefore, a fuzzy logic rule base can be applied to interpreting the spectra. The fuzzy logic rule base is also easy for themore » user to understand, and therefore, easy to check and verify its accuracy.« less

  4. The future of nuclear power and nuclear safety in the former Soviet Union

    SciTech Connect (OSTI)

    Potter, W.C.

    1993-03-01

    Although the international community is rightly concerned about the dangers of nuclear weapons proliferation in the former Soviet Union, the greatest nuclear threat emanating from that region has nothing to do with weapons. It stems, rather, from the deteriorating state of nuclear safety at the civilian nuclear power plants in Kazakhstan, Lithuanian, Russia, and Ukraine. This situation, caused by a combination of economic, political, and social factors, threatens to undermine the future of nuclear power in the former Soviet Union at the very time when the proponents of nuclear energy appear to be staging a remarkable comeback.

  5. DOE - Office of Legacy Management -- Union Mines Development Corp - NY 0-22

    Office of Legacy Management (LM)

    Mines Development Corp - NY 0-22 FUSRAP Considered Sites Site: UNION MINES DEVELOPMENT CORP. (NY.0-22) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Union Carbide NY.0-22-1 Location: New York , New York NY.0-22-1 Evaluation Year: 1987 NY.0-22-1 Site Operations: The company owned uranium mines or reserves located in the western U.S. NY.0-22-1 Site Disposition: Eliminated - No reason to believe radioactive material was used at this site NY.0-22-1

  6. Positron identification in APEX

    SciTech Connect (OSTI)

    Kaloskamis, N.I.

    1993-10-01

    The trigger which signals than an event of interest has occurred in APEX is based on the identification of back-to-back 511 keV positron annihilation radiation. The gamma rays are detected in 24- element position sensitive NaI(Tl) barrels which surround each silicon array. The gamma-ray information gives positron identification and allows the reconstruction of the location of the decaying positron on the silicon array. The principle of operation, design and performance will he presented including the energy, time and position resolutions. Examples of in-beam data show the successful suppression of false triggers from room background and beam-induced radiation, resuIting in the unambiguous identification and location of reaction positrons and the clean separation of positrons from the copious background of delta electrons.

  7. Seismic facies analysis of lacustrine system: Paleocene upper Fort Union Formation, Wind River basin, Wyoming

    SciTech Connect (OSTI)

    Liro, L.M.; Pardus, Y.C.

    1989-03-01

    The authors interpreted seismic reflection data, supported by well control, to reconstruct the stratigraphic development of Paleocene Lake Waltman in the Wind River basin of Wyoming. After dividing the upper Fort Union into eight seismic sequences, the authors mapped seismic attributes (amplitude, continuity, and frequency) within each sequence. Interpretation of the variation in seismic attributes allowed them to detail delta development and encroachment into Lake Waltman during deposition of the upper Fort Union Formation. These deltas are interpreted as high-energy, well-differentiated lobate forms with distinct clinoform morphology on seismic data. Prograding delta-front facies are easily identified on seismic data as higher amplitude, continuous events within the clinoforms. Seismic data clearly demonstrate the time-Transgressive nature of this facies. Downdip of these clinoforms, homogeneous shales, as evidenced by low-amplitude, generally continuous seismic events, accumulated in an interpreted quiet, areally extensive lacustrine setting. Seismic definition of the lateral extent of this lacustrine facies is excellent, allowing them to effectively delineate changes in the lake morphology during deposition of the upper Fort Union Formation. Encasing the upper Fort Union lacustrine deposits are fluvial-alluvial deposits, interpreted from discontinuous, variable-amplitude seismic facies. The authors highlight the correlation of seismic facies data and interpretation to well log data in the Frenchie Draw field to emphasize the accuracy of depositional environment prediction from seismic data.

  8. Climate research in the former Soviet Union. FASAC: Foreign Applied Sciences Assessment Center technical assessment report

    SciTech Connect (OSTI)

    Ellingson, R.G.; Baer, F.; Ellsaesser, H.W.; Harshvardhan; Hoffert, M.I.; Randall, D.A.

    1993-09-01

    This report assesses the state of the art in several areas of climate research in the former Soviet Union. This assessment was performed by a group of six internationally recognized US experts in related fields. The areas chosen for review are: large-scale circulation processes in the atmosphere and oceans; atmospheric radiative processes; cloud formation processes; climate effects of natural atmospheric disturbances; and the carbon cycle, paleoclimates, and general circulation model validation. The study found an active research community in each of the above areas. Overall, the quality of climate research in the former Soviet Union is mixed, although the best Soviet work is as good as the best corresponding work in the West. The best Soviet efforts have principally been in theoretical studies or data analysis. However, an apparent lack of access to modern computing facilities has severely hampered the Soviet research. Most of the issues considered in the Soviet literature are known, and have been discussed in the Western literature, although some extraordinary research in paleoclimatology was noted. Little unusual and exceptionally creative material was found in the other areas during the study period (1985 through 1992). Scientists in the former Soviet Union have closely followed the Western literature and technology. Given their strengths in theoretical and analytical methods, as well as their possession of simplified versions of detailed computer models being used in the West, researchers in the former Soviet Union have the potential to make significant contributions if supercomputers, workstations, and software become available. However, given the current state of the economy in the former Soviet Union, it is not clear that the computer gap will be bridged in the foreseeable future.

  9. SU-D-BRD-07: Automatic Patient Data Audit and Plan Quality Check to Support ARIA and Eclipse

    SciTech Connect (OSTI)

    Li, X; Li, H; Wu, Y; Mutic, S; Yang, D

    2014-06-01

    Purpose: To ensure patient safety and treatment quality in RT departments that use Varian ARIA and Eclipse, we developed a computer software system and interface functions that allow previously developed electron chart checking (EcCk) methodologies to support these Varian systems. Methods: ARIA and Eclipse store most patient information in its MSSQL database. We studied the contents in the hundreds database tables and identified the data elements used for patient treatment management and treatment planning. Interface functions were developed in both c-sharp and MATLAB to support data access from ARIA and Eclipse servers using SQL queries. These functions and additional data processing functions allowed the existing rules and logics from EcCk to support ARIA and Eclipse. Dose and structure information are important for plan quality check, however they are not stored in the MSSQL database but as files in Varian private formats, and cannot be processed by external programs. We have therefore implemented a service program, which uses the DB Daemon and File Daemon services on ARIA server to automatically and seamlessly retrieve dose and structure data as DICOM files. This service was designed to 1) consistently monitor the data access requests from EcCk programs, 2) translate the requests for ARIA daemon services to obtain dose and structure DICOM files, and 3) monitor the process and return the obtained DICOM files back to EcCk programs for plan quality check purposes. Results: EcCk, which was previously designed to only support MOSAIQ TMS and Pinnacle TPS, can now support Varian ARIA and Eclipse. The new EcCk software has been tested and worked well in physics new start plan check, IMRT plan integrity and plan quality checks. Conclusion: Methods and computer programs have been implemented to allow EcCk to support Varian ARIA and Eclipse systems. This project was supported by a research grant from Varian Medical System.

  10. Secretary Chu to Visit Houston to Highlight Obama’s State of the Union Address, Discuss “All of the Above” Energy Strategy

    Broader source: Energy.gov [DOE]

    Secretary Chu to Visit Major Industrial Efficiency Project, Host State of the Union Town Hall at Houston Community College

  11. Consistency check for trends in surface temperature and upper-level circulation: 1950-1992

    SciTech Connect (OSTI)

    Van Den Dool, H.M.; O'Lenic, E.A. ); Klein, W.H. )

    1993-12-01

    A time series of 43 years of observed monthly mean air temperature at 109 sites in the 48 contiguous US is compared to monthly mean air temperature specified from hemispheric gridded 700-mb heights. Because both upper-air and surface data have problems that may limit their use in climate change studies, this comparison could be considered a mutual consistency check. Cooling (by about 0.5[degrees]C) from 1951 to about 1970 and subsequent warming (also by 0.5[degrees]C) that continues through the present are found in both datasets, indicating that these interdecadal changes are probably real. In the last several years the specified temperatures were often colder than those observed. This prompted an investigation of whether the [open quotes]residual[close quotes] (specified minus observed) has recently been large (and negative) compared to the earlier part of the record. It was found that for the same 700-mb height field, surface temperatures were almost a degree Celsius warmer in the last few years than they were in the early 1950s, but considering the variability of the residuals over the 1950-92 period, the recent cold residuals may not yet be strikingly unusual. By comparing the full set of 109 stations to a [open quotes]clean[close quotes] subset of 24, the impact of common problems in surface data (station relocation, urbanization, etc.) was found to be quite small. The rather favorable comparison of observed surface temperatures and specified temperatures (which suffer from upper-air analysis/observation changes over the years) indicates that their respective data problems do not appear to validate their use in studies of interdecadal temperature change. 16 refs., 6 figs.

  12. Risk Identification and Assessment

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Risk Identification and Assessment [Sections in brackets are for instructions; these should be deleted or replaced with specifics in the template.] Subsystem Title or Section within Subsystem [In the first column, using short bullets, fill in "what can go wrong," or a brief description of a potential benefit from a program or action. Add additional rows as necessary. Fill in the other columns using the rating guidelines in the attached reference pages.] |Risk|Probability|Impact|Risk

  13. PINS Spectrum Identification Guide

    SciTech Connect (OSTI)

    A.J. Caffrey

    2012-03-01

    The Portable Isotopic Neutron Spectroscopy—PINS, for short—system identifies the chemicals inside munitions and containers without opening them, a decided safety advantage if the fill chemical is a hazardous substance like a chemical warfare agent or an explosive. The PINS Spectrum Identification Guide is intended as a reference for technical professionals responsible for the interpretation of PINS gamma-ray spectra. The guide is divided into two parts. The three chapters that constitute Part I cover the science and technology of PINS. Neutron activation analysis is the focus of Chapter 1. Chapter 2 explores PINS hardware, software, and related operational issues. Gamma-ray spectral analysis basics are introduced in Chapter 3. The six chapters of Part II cover the identification of PINS spectra in detail. Like the PINS decision tree logic, these chapters are organized by chemical element: phosphorus-based chemicals, chlorine-based chemicals, etc. These descriptions of hazardous, toxic, and/or explosive chemicals conclude with a chapter on the identification of the inert chemicals, e.g. sand, used to fill practice munitions.

  14. Large oil resource awaits exploitation in former Soviet Union's Muslim republics

    SciTech Connect (OSTI)

    Riva, J.P. Jr. )

    1993-01-04

    Throughout the dramatic breakup of the Soviet Union, most of the attention was focused on the Russian federation. This paper reports that less notice was paid to the republics of Azerbaijan, Kazakhstan, Turkmenistan, Uzbekistan, Kirghizia, and Tadzhikistan that are located along the Soviet southern fringe. This region was known as the Northern Tier (of the Middle East) when the six republics were forcibly incorporated into the Soviet Union by the Red Army after the revolution. The Russians were considered colonial rulers by the inhabitants of these Muslim states, whereas the Azeris, Turkmen, Uzbeks, Kazakhs, Tajiks, Kyrgyzs, etc., were often regarded as backward by the Russians and given little autonomy. The Soviets, while proclaiming their efforts to improve public health and protect nature, relentlessly degraded both.

  15. RFEDSCHK User`s Manual (The RFEDS Lab Data Check routine), Environmental and Scientific Systems Information Resources: Version 1.00

    SciTech Connect (OSTI)

    Not Available

    1992-05-01

    The RFEDS Laboratory Data Check routine (RFEDSCHK) preforms checks of the off-site laboratory data to identify missing and/or incorrect data which may exist. The check routine is designed to assist the laboratories to correct deficiencies contained in the data before it is sent to the Rocky Flats Environmental Management Department, there-by improving the quality of the data being placed in RFEDS. If the data passes the checks with no errors, the data will be acceptable for placement into RFEDS and delivery of the electronic data to EG&G is appropriate. If errors are detected, the laboratory should correct the errors and perform the check again until the data is free of errors.

  16. SF6432-NI Fixed Price Contracts with the Newly Independent States of the Former Soviet Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Release Date: 11/17/15 Page 1 of 15 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-NI (11/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS WITH THE NEWLY INDEPENDENT STATES OF THE FORMER SOVIET UNION THE FOLLOWING CLAUSES APPLY TO REQUESTS FOR QUOTATION AND CONTRACTS AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN

  17. Visit us at the American Geophysical Union (AGU) Fall Meeting, Booth#1211 |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dec 14-18th us at the American Geophysical Union (AGU) Fall Meeting, Booth#1211 | Dec 14-18th - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization

  18. November 17, 2009 HSS/Union Lead Checkpoint Meeting - Integrated Collaborative Oversight Concept

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Collaborative Oversight (ICO) Concept Evolution - Emerged from Insights HSS Gained through: * Laboratory Sustainability Pilot Studies * Visiting Speaker Program * Union Focus Group Meetings ICO Concept Overview * Goals - Transition DOE into a better balance between oversight and reliable mission execution as a first step toward 21 st century governance - Maintain the health, safety, and security of DOE site workers and facilities - Create a highly competent process through inclusion *

  19. November 17, 2009 HSS/Union Lead Checkpoint Meeting on Integrated Collaborative Oversight - Agenda

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10:30 - 11:30 pm EST FORS 7E-069 Union Leads: Ron Ault.................. ............... AFL-CIO Metal Trades Department Pete Stafford................................Building and Construction Trades Department Center for Construction Research & Training (BCTD CPWR) Chico McGill/Dennis Phelps...........International Brotherhood of Electrical Workers [IBEW] Tommy Fuller............................Sheet Metal Workers International Association [SMWIA] James Frederick/Doug Stephens........United

  20. May 19, 2011, HSS/Union Focus Group Meeting - Draft Work Group Matrix

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    06-22-11) WORK GROUPS HSS/ Union/ Stakeholder Leads Work Group Participants Improvement Issues/Goals Initial/Current Tasks Outputs 10 CFR 851 Pat Worthington CPWR USW Collectively work to ensure implementation of health and safety programs (851 Rule) within and among DOE site contractors to eliminate/minimize inconsistent requirements among M&I, M&O, LLC and SBA contractors/subcontractors. - Identify leads and participants - Develop charter - Goals/ Intended Output - Develop Task

  1. Short-Term Energy Tests of a Credit Union Building in Idaho (Draft)

    SciTech Connect (OSTI)

    Subbarao, K.; Balcomb, J. D.

    1993-01-01

    This report describes tests and results of the energy performance of a credit union building in Idaho. The building is in the Energy Edge Program administered by the Bonneville Power Administration (BPA). BPA provided incentives to incorporate innovative features designed to conserve energy use by the building. It is of interest to determine the actual performance of these features. The objective of this project was to evaluate the applicability of the SERI short-term energy monitoring (STEM) method to nonresidential buildings.

  2. DOE - Office of Legacy Management -- Union Carbide and Carbon Co - TN 10

    Office of Legacy Management (LM)

    Carbide and Carbon Co - TN 10 FUSRAP Considered Sites Site: Union Carbide and Carbon Co (TN.10) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 5 FUSRAP considered sites for which records are available that provide a reasonably complete historical account of their operations and relationship, if any, with MED/AEC

  3. Marriage or Civil Unions for Single Cells and Metagenomics (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Rusch, Doug [J. Craig Venter Institute

    2013-01-22

    JCVI's Doug Rusch on "Marriage or Civil Unions for Single Cells and Metagenomes" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  4. In Charlotte, Senior DOE Official to Amplify State of the Union, Call to Give Drivers More Options at the Pump

    Broader source: Energy.gov [DOE]

    Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson will join officials from NASCAR and Sprint Corp. in Charlotte, N.C., to highlight the President’s State of the Union address

  5. SU-E-T-377: Inaccurate Positioning Might Introduce Significant MapCheck Calibration Error in Flatten Filter Free Beams

    SciTech Connect (OSTI)

    Wang, S; Chao, C; Chang, J

    2014-06-01

    Purpose: This study investigates the calibration error of detector sensitivity for MapCheck due to inaccurate positioning of the device, which is not taken into account by the current commercial iterative calibration algorithm. We hypothesize the calibration is more vulnerable to the positioning error for the flatten filter free (FFF) beams than the conventional flatten filter flattened beams. Methods: MapCheck2 was calibrated with 10MV conventional and FFF beams, with careful alignment and with 1cm positioning error during calibration, respectively. Open fields of 37cmx37cm were delivered to gauge the impact of resultant calibration errors. The local calibration error was modeled as a detector independent multiplication factor, with which propagation error was estimated with positioning error from 1mm to 1cm. The calibrated sensitivities, without positioning error, were compared between the conventional and FFF beams to evaluate the dependence on the beam type. Results: The 1cm positioning error leads to 0.39% and 5.24% local calibration error in the conventional and FFF beams respectively. After propagating to the edges of MapCheck, the calibration errors become 6.5% and 57.7%, respectively. The propagation error increases almost linearly with respect to the positioning error. The difference of sensitivities between the conventional and FFF beams was small (0.11 ± 0.49%). Conclusion: The results demonstrate that the positioning error is not handled by the current commercial calibration algorithm of MapCheck. Particularly, the calibration errors for the FFF beams are ~9 times greater than those for the conventional beams with identical positioning error, and a small 1mm positioning error might lead to up to 8% calibration error. Since the sensitivities are only slightly dependent of the beam type and the conventional beam is less affected by the positioning error, it is advisable to cross-check the sensitivities between the conventional and FFF beams to detect

  6. PINS chemical identification software

    DOE Patents [OSTI]

    Caffrey, Augustine J.; Krebs, Kennth M.

    2004-09-14

    An apparatus and method for identifying a chemical compound. A neutron source delivers neutrons into the chemical compound. The nuclei of chemical elements constituting the chemical compound emit gamma rays upon interaction with the neutrons. The gamma rays are characteristic of the chemical elements constituting the chemical compound. A spectrum of the gamma rays is generated having a detection count and an energy scale. The energy scale is calibrated by comparing peaks in the spectrum to energies of pre-selected chemical elements in the spectrum. A least-squares fit completes the calibration. The chemical elements constituting the chemical compound can be readily determined, which then allows for identification of the chemical compound.

  7. SU-E-T-631: Commissioning and Comprehensive Evaluation of the ArcCHECK Cylindrical Diode Array for VMAT QA

    SciTech Connect (OSTI)

    Chaswal, V; Weldon, M; Gupta, N; Rong, Y

    2014-06-15

    Purpose: Commissioning and comprehensive evaluation of ArcCHECK phantom for dosimetry of VMAT QA, using 6MV photon beam with and without the flattening filter. Methods: ArcCHECK was evaluated for response dependency on linac dose rate, instantaneous dose rate, radiation field size, beam angle and couch insertion. Scatter dose characterization, consistency and symmetry of response, dosimetric accuracy of fixed aperture arcs and clinical VMAT plans were investigated. Measurements were done using TrueBeam™ STx accelerator (Console version 1.6) with a 6 MV beam with and without flattening filter. Reference dose-grids were calculated using Eclipse TPS Analytical Anisotropic Algorithm (AAA version 10.0.39). Planned doses were calculated using symmetric 2mm 3D dose grids with 4 degree angular resolution defaulted to each control point. Gamma evaluations were performed in absolute dose mode, with default normalization to maximum dose in the curved plane and a low dose threshold of 10% to restrict the analysis to clinically relevant areas. Global and local gamma indices at 3mm/3% and 2mm/2% level were computed using SNC software (version 6.0). Results: Results of gamma analysis demonstrated an overall agreement between ArcCHECK measured and TPS calculated reference doses. Field size dependency was within 0.5% of the reference. Dose-rate based dependency was well within 1% of the TPS reference and the angular dependency was ±3% of the reference, as tested for BEV angles. At the level of 3%/3mm, narrow and wide open arcs as well as clinical VMAT cases demonstrated high level of dosimetry accuracy in global gamma passing rates for both 6X and 6F beams. At the level of 2%/2mm two VMAT cases involving the narrow heavily modulated arcs demonstrated lower passing rates. Conclusion: ArcCHECK phantom with latest software and hardware upgrades is suitable for VMAT QA. For higher sensitivity of 2%/2mm gamma analysis, we intend to use it as one of the VMAT QA evaluation metrics.

  8. State of the Union Highlights Clean Energy Progress | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    President Obama focused on a variety of renewable energy and energy efficiency issues in his State of the Union address on January 28, highlighting progress toward a "shift to a cleaner energy economy" and spotlighting solar energy and fuel efficiency. "The shift to a cleaner energy economy won't happen overnight, and it will require tough choices along the way," President Obama said. "But the debate is settled. Climate change is a fact. And when our children's children

  9. Bibliography on northern pipelines in the former Soviet Union. Special report

    SciTech Connect (OSTI)

    Smallidge, E.R.

    1997-08-01

    In 1993 a pilot project between the Defense Technical Information Center and the U.S. Army Cold Regions Research and Engineering Laboratory resulted in a proposal to conduct a state-of-the-art review of technology and techniques for building, operating, and maintaining arctic natural gas and liquid petroleum pipelines in the former Soviet Union. The objectives of the pipeline review were to (1) Review the design, construction, operation, and maintenance procedures of oil and gas pipelines in the permafrost areas of eastern and western Siberia. (2) Assemble data on the evolution of Siberian pipelines, reflecting changes in size, modes of construction, and age. (3) Assemble data on maintenance procedures and practices, including inspection techniques with respect to corrosion, pipe wrinkling, and metal fatigue. (4) Assemble data on pipeline failures and attempt to predict life expectancy of different pipelines under the harsh arctic environment. (5) Evaluate the environmental impact of different pipeline construction techniques and relate it to ruptures and breaks. In conjunction with the study objectives, a literature search was conducted on northern pipelines in the former Soviet Union. References were compiled on dates of construction, location, route conditions, design, construction, maintenance, environmental impact, accidents, production management, and other pertinent facts. In the resulting bibliography, references are separated into three categories: Oil and Gas Pipelines, Construction, and Accidents. There is some repetition of references between the categories because some are relevant to more than one of the subject categories.

  10. The bear awakens: Resurgence of oil and gas in the former Soviet Union

    SciTech Connect (OSTI)

    Foreman, N.E.

    1996-12-31

    Since dissolution of the Soviet Union (USSR) in late 1991, the oil and gas industries in the 15 component nations have been in a state of turmoil stemming mainly from past communist management practices and the transition to Western-style market economies and multiparty governments. As a result, oil and gas output have fallen dramatically. This study incorporates separate oil and gas production forecasts, predicted independently by onshore and offshore sectors, for each of the producing republics of the Former Soviet Union (FSU) over the period 1996-2005. Supply--assessed by full-cycle resource analysis--and demand, estimated from available historic and projected consumption figures, are balanced to yield a coherent picture. Production of both oil and gas for the FSU is forecast to recover strongly. Oil and condensate output--led by Russia, Kazakhstan, and Azerbaijan--are forecast to rebound to 9,545 MBOPD by 2005, which will reinstate the FSU as one of the world`s premier crude exporting blocs. Natural gas output--propelled by gains in Russia, Turkmenistan, and Uzbekistan--will likewise resurge, reaching a world-leading 96,051 MMCFD level, of which a large amount will be exported.

  11. Summary Protocol: Identification, Characterization, Designation, Remedial

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Action, Certification | Department of Energy Summary Protocol: Identification, Characterization, Designation, Remedial Action, Certification Summary Protocol: Identification, Characterization, Designation, Remedial Action, Certification Summary Protocol: Identification, Characterization, Designation, Remedial Action, Certification (January 1986) Summary Protocol: Identification, Characterization, Designation, Remedial Action, Certification (January 1986) (2.36 MB) More Documents &

  12. Pileup per particle identification

    SciTech Connect (OSTI)

    Bertolini, Daniele; Harris, Philip; Low, Matthew; Tran, Nhan

    2014-10-09

    We propose a new method for pileup mitigation by implementing pileup per particle identification (PUPPI). For each particle we first define a local shape ? which probes the collinear versus soft diffuse structure in the neighborhood of the particle. The former is indicative of particles originating from the hard scatter and the latter of particles originating from pileup interactions. The distribution of ? for charged pileup, assumed as a proxy for all pileup, is used on an event-by-event basis to calculate a weight for each particle. The weights describe the degree to which particles are pileup-like and are used to rescale their four-momenta, superseding the need for jet-based corrections. Furthermore, the algorithm flexibly allows combination with other, possibly experimental, probabilistic information associated with particles such as vertexing and timing performance. We demonstrate the algorithm improves over existing methods by looking at jet pT and jet mass. We also find an improvement on non-jet quantities like missing transverse energy.

  13. Pileup per particle identification

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bertolini, Daniele; Harris, Philip; Low, Matthew; Tran, Nhan

    2014-10-09

    We propose a new method for pileup mitigation by implementing pileup per particle identification (PUPPI). For each particle we first define a local shape ? which probes the collinear versus soft diffuse structure in the neighborhood of the particle. The former is indicative of particles originating from the hard scatter and the latter of particles originating from pileup interactions. The distribution of ? for charged pileup, assumed as a proxy for all pileup, is used on an event-by-event basis to calculate a weight for each particle. The weights describe the degree to which particles are pileup-like and are used tomorerescale their four-momenta, superseding the need for jet-based corrections. Furthermore, the algorithm flexibly allows combination with other, possibly experimental, probabilistic information associated with particles such as vertexing and timing performance. We demonstrate the algorithm improves over existing methods by looking at jet pT and jet mass. We also find an improvement on non-jet quantities like missing transverse energy.less

  14. Nuclear reaction analysis for H, Li, Be, B, C, N, O and F with an RBS check

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Lanford, W. A.; Parenti, M.; Nordell, B. J.; Paquette, M. M.; Caruso, A. N.; Mäntymäki, M.; Hämäläinen, J.; Ritala, M.; Klepper, K. B.; Miikkulainen, V.; et al

    2015-11-12

    In this paper, 15N nuclear reaction analysis (NRA) for H is combined with 1.2 MeV deuteron (D) NRA which provides a simultaneous analysis for Li, Be, B, C, N, O and F. The energy dependence of the D NRA has been measured and used to correct for the D energy loss in film being analyzed. A 2 MeV He RBS measurement is made. Film composition is determined by a self-consistent analysis of the light element NRA data combined with an RBS analysis for heavy elements. This composition is used to simulate, with no adjustable parameters, the complete RBS spectrum. Finally,more » comparison of this simulated RBS spectrum with the measured spectrum provides a powerful check of the analysis.« less

  15. Mechanistic insights into mode of action of potent natural antagonists of BACE-1 for checking Alzheimer’s plaque pathology

    SciTech Connect (OSTI)

    Dhanjal, Jaspreet Kaur; Goyal, Sukriti; Sharma, Sudhanshu; Hamid, Rabia; Grover, Abhinav

    2014-01-17

    Highlights: •Accumulation of Aβ plaques is one of the major pathology associated with Alzheimer’s disease. •Inhibition of β-Secretase or BACE-1 offers a viable prospect to check the growth of these plaques. •A large virtual dataset of natural compounds was screened against BACE-1. •Top two hits were analyzed for thermodynamic and structural stability using MD simulations. •Their detailed binding mode of actions were elucidated. -- Abstract: Alzheimer’s is a neurodegenerative disorder resulting in memory loss and decline in cognitive abilities. Accumulation of extracellular beta amyloidal plaques is one of the major pathology associated with this disease. β-Secretase or BACE-1 performs the initial and rate limiting step of amyloidic pathway in which 37–43 amino acid long peptides are generated which aggregate to form plaques. Inhibition of this enzyme offers a viable prospect to check the growth of these plaques. Numerous efforts have been made in recent years for the generation of BACE-1 inhibitors but many of them failed during the preclinical or clinical trials due to drug related or drug induced toxicity. In the present work, we have used computational methods to screen a large dataset of natural compounds to search for small molecules having BACE-1 inhibitory activity with low toxicity to normal cells. Molecular dynamics simulations were performed to analyze molecular interactions between the screened compounds and the active residues of the enzyme. Herein, we report two natural compounds of inhibitory nature active against β-secretase enzyme of amyloidic pathway and are potent lead molecules against Alzheimer’s disease.

  16. SU-E-T-374: Sensitivity of ArcCHECK to Tomotherapy Delivery Errors: Dependence On Analysis Technique

    SciTech Connect (OSTI)

    Templeton, A; Chu, J; Turian, J

    2014-06-01

    Purpose: ArcCHECK (Sun Nuclear) is a cylindrical diode array detector allowing three-dimensional sampling of dose, particularly useful in treatment delivery QA of helical tomotherapy. Gamma passing rate is a common method of analyzing results from diode arrays, but is less intuitive in 3D with complex measured dose distributions. This study explores the sensitivity of gamma passing rate to choice of analysis technique in the context of its ability to detect errors introduced into the treatment delivery. Methods: Nine treatment plans were altered to introduce errors in: couch speed, gantry/sonogram synchronization, and leaf open time. Each plan was then delivered to ArcCHECK in each of the following arrangements: offset, when the high dose area of the plan is delivered to the side of the phantom so that some diode measurements will be on the order of the prescription dose, and centered, when the high dose is in the center of the phantom where an ion chamber measurement may be acquired, but the diode measurements are in the mid to low-dose region at the periphery of the plan. Gamma analysis was performed at 3%/3mm tolerance and both global and local gamma criteria. The threshold of detectability for each error type was calculated as the magnitude at which the gamma passing rate drops below 90%. Results: Global gamma criteria reduced the sensitivity in the offset arrangement (from 2.3% to 4.5%, 8 to 21, and 3ms to 8ms for couch-speed decrease, gantry-error, and leaf-opening increase, respectively). The centered arrangement detected changes at 3.3%, 5, and 4ms with smaller variation. Conclusion: Each arrangement has advantages; offsetting allows more sampling of the higher dose region, while centering allows an ion chamber measurement and potentially better use of tools such as 3DVH, at the cost of positioning more of the diodes in the sometimes noisy mid-dose region.

  17. Contamination of the Northern Oceans from Releases of Radioactivity from the Former Soviet Union

    SciTech Connect (OSTI)

    Gomez, Leo S.

    1999-06-04

    During the Cold War the handling of Soviet military nuclear wastes was a classified topic--kept secret to hide the status and readiness of Soviet military forces. Following the end of the Cold War information about the handling of nuclear wastes by agencies of the Former Soviet Union (FSU) became available. The US Government response to the disclosure of disposal of radioactive wastes into the Arctic Ocean and into rivers that drain into the Arctic Ocean was the finding of the Arctic Nuclear Waste Assessment Program (ANWAP) in the Office of Naval Research (ONR). Projects were aided by ANWAP to study the behavior, transport, and fate of radionuclides in the Arctic Ocean. One of the research teams, the Risk Assessment Integration Group (RAIG) assessed the potential risks to humans and to the environment, particularly in the US Alaskan Arctic.

  18. Concealed identification symbols and nondestructive determination of the identification symbols

    DOE Patents [OSTI]

    Nance, Thomas A.; Gibbs, Kenneth M.

    2014-09-16

    The concealing of one or more identification symbols into a target object and the subsequent determination or reading of such symbols through non-destructive testing is described. The symbols can be concealed in a manner so that they are not visible to the human eye and/or cannot be readily revealed to the human eye without damage or destruction of the target object. The identification symbols can be determined after concealment by e.g., the compilation of multiple X-ray images. As such, the present invention can also provide e.g., a deterrent to theft and the recovery of lost or stolen objects.

  19. Two Forms of Identification | Department of Energy

    Energy Savers [EERE]

    Two Forms of Identification (95.07 KB) More Documents & Publications Self-Identification of Disability LNG Exports by Truck out of the U.S. Form LNG Imports by Truck into the U.S. ...

  20. OPEN SEASON CHECK LIST

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FSAFEDS brochure https:www.fsafeds.comGEMFSAFEDSFormsOPM- FSA-OVTF-10-031.pdf Talk to an FSAFEDS representative Open Season benefits fair Contact your agency HR staff...

  1. Fact Check: Steve Spinner

    Broader source: Energy.gov [DOE]

    Some media outlets have asked us questions about the role that Steve Spinner played during his time at the Energy Department. He was an advisor on our Recovery Act team tasked with monitoring the...

  2. Identification of synchronous machine parameters

    SciTech Connect (OSTI)

    Shaban, A.O.

    1985-01-01

    The synchronous machine is an essential component of a power system and determination of its parameters accurately is an important task in securing adequate modes of operation through certain control strategies. An estimation technique based on the Powell algorithm was evaluated for the identification of these parameters on the basis of small-signal input-output data. A fifth order Park domain flux linkage model of a salient pole machine was used for the identification of the parameters. Stator terminal voltages as transformed into the Park domain, field voltage and rotor frequency were used as input signals to the model. The input signals to the actual machine are the stator terminal voltages and the field voltage. The Park domain stator terminal current and field current were used as output signals. Due to the lack of access to real data, digital simulation of an actual machine as used in an effort to establish the machine responses in the time domain to small changes in the input signals. These responses were compared with those obtained from the model with the unknown parameters and utilized in the identification process. The sensitivity of a least-square loss-function with respect to each parameter was tested. The proposed parameter identification method was evaluated with data of two different machines. Careful observation of the results indicates that convergence can only be secured if nonsimultaneous perturbation of the direct - and quadrature - axis components of the terminal voltages is applied.

  3. Analytical services Organization Union Valley sample Preparation facility Polychlorinated Biphenyl (PCB) Annual Inventory Document

    SciTech Connect (OSTI)

    Brown, B.J.

    1998-06-01

    The Analytical Services Organization (ASO), Union Valley Sample Preparation Facility (UVSPF), provides analytical testing in support of the Department of Energy (DOE), Oak Ridge Operations (ORO), and associated sites. Samples generated on the Oak Ridge Reservation (ORR) are routinely received at the WSPF for analytical evaluatiotiidentification. Many of these samples are polychlorinated biphenyl (PCB) regulated from a source or being sent to the facility to determine PCB content. PCB laboratory wastes in solid and liquid form are generated during the evaluation of these materials, requiring the WSPF staff to maintain formal storage areas for staging the materials prior to off-site shipment for disposal. The purpose of this report is to fulfill the requirements set forth in Title 40, Code of Federal Regulations (CFR), Part 761.180(a), Subpart J, which requires owners or operators of a facility using or storing PCBS to prepare an annual inventory document by July 1 of the current year which covers the previous calendar year. This report provides documentation of the inventory of PCB materials/wastes that were generated, stored for dispos~ and shipped off site for disposal for the period January 1, 1997, to January 1, 1998. The following is a summary of materials/wastes subject to the aforementioned reporting requirements.

  4. United States-assisted studies on dose reconstruction in the former Soviet Union

    SciTech Connect (OSTI)

    Anspaugh, L.R.; Bouville, A.

    1995-12-01

    Following the Chernobyl accident, the US and the USSR entered into an agreement to work on the safety of civilian nuclear reactors; one aspect of that work was to study the environmental transport and health effects of radionuclides released by the accident. After the break-up of the USSR separate agreements were established between the US and Ukraine, Belarus, and Russia to continue work on dose reconstruction and epidemiologic studies of health effects from exposure to external radiation and the incorporation of radionuclides. Studies in Belarus and Ukraine related to the Chernobyl accident now emphasize epidemiologic: studies of childhood-thyroid cancer and leukemia, and eye-lens-cataract formation in liquidators. Supporting studies on dose reconstruction emphasize a variety of ecological, physical, and biological techniques. Studies being conducted in Russia currently emphasize health effects in the workers and the population around the Mayak Industrial Association. As this production complex is an analogue of the US Hanford Works, advantage is being taken of the US experience in conducting a similar, recently completed dose-reconstruction study. In all cases the primary work on dose reconstruction is being performed by scientists from the former Soviet Union. US assistance is in the form of expert consultation and participation, exchange visits, provision of supplies and equipment, and other forms of local assistance.

  5. Environmental assistance as national security policy: Helping the former Soviet Union find solutions to its environmental problems

    SciTech Connect (OSTI)

    Dunaway, R.L.

    1995-11-01

    Since the fall of Communism in the former Soviet Union, US Presidents and policy makers have stressed the importance of helping Russia and the Newly Independent States develop democratic forms of government and forge strong economic and environmental ties with other nations throughout the world. The US can and should play a role in helping the Commonwealth of Independent States repair decades of damage caused by Cold War-driven industrial and nuclear development. This report describes some of the region`s most serious environmental problems and their potential to spread throughout the affected areas to neighboring countries. It provides an overview of the emerging environmental component of the US. National Security Strategy first proposed by President Bush. Finally, it describes an ambitious proposal to implement geographic information system (GIS) technology as a means of helping the former Soviet Union identify and monitor existing and potential environmental hazards. The ability to locate, analyze, and track existing damage reliably, as a prelude to predicting potential threats, is a necessary first step in developing a viable strategy to protect environmental, economic, and social resources, both in the former Soviet Union and world-wide.

  6. Trafficking of nuclear materials from the former Soviet Union news abstracts

    SciTech Connect (OSTI)

    Erickson, S A; Lawson, T M

    1999-08-31

    This report was generated to provide a background for understanding the type and variety of smuggling incidents that have been reported. As discussed in the Site Prioritization report, smuggling cases provide insight into the activities of what has been called ''amateur smuggling'', that is, smugglers who do not belong to a professional smuggling gang. In many instances, the law enforcement officials giving the press release are not familiar with nuclear materials, and give incorrect identification. The other portions of the information, such as number of individuals involved, places, and modes of operation are likely to be more correct.

  7. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007 - 2012; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Hand, Maureen

    2015-06-15

    This presentation provides a summary of IEA Wind Task 26 report on Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007-2012

  8. Muon Reconstruction and Identification in CMS

    SciTech Connect (OSTI)

    Everett, A.

    2010-02-10

    We present the design strategies and status of the CMS muon reconstruction and identification identification software. Muon reconstruction and identification is accomplished through a variety of complementary algorithms. The CMS muon reconstruction software is based on a Kalman filter technique and reconstructs muons in the standalone muon system, using information from all three types of muon detectors, and links the resulting muon tracks with tracks reconstructed in the silicon tracker. In addition, a muon identification algorithm has been developed which tries to identify muons with high efficiency while maintaining a low probability of misidentification. The muon identification algorithm is complementary by design to the muon reconstruction algorithm that starts track reconstruction in the muon detectors. The identification algorithm accepts reconstructed tracks from the inner tracker and attempts to quantify the muon compatibility for each track using associated calorimeter and muon detector hit information. The performance status is based on detailed detector simulations as well as initial studies using cosmic muon data.

  9. Identification of Hazards, 3/9/95

    Broader source: Energy.gov [DOE]

    The objective of this surveillance is to evaluate the effectiveness of the contractor's hazards identification programs.  Surveillance activities encompass maintenance and implementation of safety...

  10. Identification of a Previously Unobserved Dissociative Ionization...

    Office of Scientific and Technical Information (OSTI)

    Identification of a Previously Unobserved Dissociative Ionization Pathway in Time-Resolved Photospectroscopy of the Deuterium Molecule Not Available Temp HTML Storage 2: Cao, Wei; ...

  11. Ethnicity and Race Identification | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Ethnicity and Race Identification More Documents & Publications DOE F 1600.7 Employee In-Processing Forms Office of Personnel Management (OPM) Guidance on Diversity and Inclusion

  12. SU-E-T-80: Comparison of Fluence-Based RapidArc QAs Using EPID and MapCHECK 2

    SciTech Connect (OSTI)

    Jin, H; Jesseph, F; Ahmad, S

    2014-06-01

    Purpose: To compare the Varian aS-1000 EPID imager to the isocentrically mounted MapCHECK 2 diode array for RapidArc QAs as a function of photon beam energy. Methods: A Varian TrueBeam STx with an aS-1000 digital imaging panel was used to acquire RapidArc QA images for 13 patient plans; each plan QA was performed at 6, 8, 10 and 15MV energies. The Portal Dose Image Prediction algorithm in the Varian Eclipse treatment planning system (TPS) was used to create the comparison image for the EPID acquisition. A Sun Nuclear MapCHECK 2 diode array on an isocentric mounting fixture with 5 cm water-equivalent buildup was also used for the RapidArc QAs. A composite dose plane was taken from the Eclipse TPS for comparison to the MapCHECK 2 measurements. A gamma test was implemented in the Sun Nuclear Patient software with 10% threshold and absolute comparison for both QA methods. The two-tailed paired t-test was employed to analyze the statistical significance between two methods at the 95% confidence level. Results: The average gamma passing rates were greater than 95% at 3%/3mm using both methods for all four energies. The average passing rates were within 2.5% and 1.1% of each other when analyzed at 2%/2mm and 3%/3mm conditions, respectively. The EPID passing rates were somewhat better than the MapCHECK 2 when analyzed at 1%/1mm condition; this difference decreased with increasing energy (9.1% at 6MV to 2.7% at 15MV). The differences were not statistically significant for all criteria and energies (p-value ã 0.05). Conclusion: EPID-based RapidArc QA results are comparable to MapCHECK 2 when using 3%/3mm criteria at all four energies. EPID-based QA shows potential for being the superior device under strict gamma criteria.

  13. Enhancer Identification through Comparative Genomics

    SciTech Connect (OSTI)

    Visel, Axel; Bristow, James; Pennacchio, Len A.

    2006-10-01

    With the availability of genomic sequence from numerousvertebrates, a paradigm shift has occurred in the identification ofdistant-acting gene regulatory elements. In contrast to traditionalgene-centric studies in which investigators randomly scanned genomicfragments that flank genes of interest in functional assays, the modernapproach begins electronically with publicly available comparativesequence datasets that provide investigators with prioritized lists ofputative functional sequences based on their evolutionary conservation.However, although a large number of tools and resources are nowavailable, application of comparative genomic approaches remains far fromtrivial. In particular, it requires users to dynamically consider thespecies and methods for comparison depending on the specific biologicalquestion under investigation. While there is currently no single generalrule to this end, it is clear that when applied appropriately,comparative genomic approaches exponentially increase our power ingenerating biological hypotheses for subsequent experimentaltesting.

  14. Required Forms of Identification for Hanford Site Access UNEXPIRED...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    TWO FORMS OF IDENTIFICATION ARE REQUIRED if your identification is a standard driver's license or state-issued ID card from Washington, Illinois, Missouri, Minnesota, or American ...

  15. National laboratory technical exchanges with institutions and laboratories in the newly independent states of the former Soviet Union

    SciTech Connect (OSTI)

    Preszler, A.M.

    1994-07-01

    In March, 1992, the Department of Energy and the State Department established guidelines to encourage and direct laboratory-to-laboratory (lab-to-lab) cooperation with institutes in the newly independent states (NIS) of the former Soviet Union. As a nonproliferation effort, the cooperative activities focus on the need to prevent emigration of weapons scientists to potentially proliferant states and organizations. The objective is to encourage joint projects/contracts in non-weapons-related areas in order to provide meaningful work, commensurate with scientific capabilities, that will reduce economic pressures for emigration and assist in the development of a market economy. In addition, by encouraging Western science's philosophy of openness, peer reviews and publishing, the cooperative projects improve the transparency of weapons laboratories in the former Soviet Union. Technical collaborations are rapidly increasing in number and are fostering US industrial participation. Since the initial technical exchanges in October of 1992, lab-to-lab interactions resulted in more than 200 contracts, totaling more than $5 million, and involving more than 40 institutes in Russia, Ukraine, Kazakhstan and Belarus.

  16. H. R. 1948: A Bill to reduce the threat from nuclear facilities located in the former Soviet Union. Introduced in the House of Representatives, One Hundred Third Congress, First Session, April 29, 1993

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    This bill gives the President a directive to establish a program to reduce the environmental and national security threats from nuclear facilities located in the former Soviet Union.

  17. Multi-level RF identification system

    DOE Patents [OSTI]

    Steele, Kerry D.; Anderson, Gordon A.; Gilbert, Ronald W.

    2004-07-20

    A radio frequency identification system having a radio frequency transceiver for generating a continuous wave RF interrogation signal that impinges upon an RF identification tag. An oscillation circuit in the RF identification tag modulates the interrogation signal with a subcarrier of a predetermined frequency and modulates the frequency-modulated signal back to the transmitting interrogator. The interrogator recovers and analyzes the subcarrier signal and determines its frequency. The interrogator generates an output indicative of the frequency of the subcarrier frequency, thereby identifying the responding RFID tag as one of a "class" of RFID tags configured to respond with a subcarrier signal of a predetermined frequency.

  18. SU-E-T-223: Investigation of the Accuracy of Two-Dimensional Dose Distributions Measurement From High-Dose-Rate Brachytherapy Ir-192 Source Using Multiple-Diode-Array Detector (MapCheck2)

    SciTech Connect (OSTI)

    Taguenang, J; De La Fuente, T Herman; Ahmad, S; Ali, I

    2014-06-01

    Purpose: To investigate the dosimetric accuracy of multiple-diode-array detector (Mapcheck2) for high-dose-rate brachytherapy Ir-192 source. The two-dimensional (2D) dose distributions measured with MapCheck2 were validated with EBT2 Gafchromic film measurement and AAPM task-group- 43 (TG-43) modeling. Methods: 2D-dose distributions from Ir-192 source were measured with MapCheck2 and EBT2-films. MapCheck2 response was corrected for effects: directional dependence, diode and phantom heterogeneity. Optical density growth of the film was controlled by synchronized scanning of the film exposed to Ir-192 and calibration films exposed to 6 MV linac beams. Similarly, MapCheck2 response was calibrated to dose using 6 MV beams. An empirical model was developed for the dose distributions measured with Mapcheck2 that considered directional, diode and phantom heterogeneity corrections. The dose deposited in solid-state-detectors was modeled using a cavity theory model for the diode. This model was then validated with measurements using EBT2-films and calculations with TG-43. Results: The response of MapCheck2 has been corrected for different effects including: (a) directional dependence of 0–20% over angular range 0o–90o, (b) phantom heterogeneity (3%) and (c) diode heterogeneity (9%). The corrected dose distributions measured with MapCheck2 agreed well with the measured dose distributions from EBT2-film and with calculations using TG-43 within 5% over a wide range of dose levels and rates. The advantages of MapCheck2 include less noisy, linear and stable response compared with film. The response of MapCheck2 exposed to 192Ir-source showed no energy dependence similar to its response to MV energy beam. Detection spatial-resolution of individual diodes was 0.8×0.8 mm2, however, 2DMapCheck2 resolution is limited by distance between diodes (7.07 mm). Conclusion: The dose distribution measured with MapCheck2 agreed well within 5% with that measured using EBT2-films; and

  19. Self-Identification of Disability | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Self-Identification of Disability Self-Identification of Disability Self-Identification of Disability (556.76 KB) More Documents & Publications DOE Emergency Special Needs Self-Identification Form Enforcement Letter, URS Energy and Construction, Inc. Operational Plan and Desktop Reference for the Disability Employment Program

  20. Hanford Identification (HID) PIA, Richland Operations Office | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Identification (HID) PIA, Richland Operations Office Hanford Identification (HID) PIA, Richland Operations Office Hanford Identification (HID) PIA, Richland Operations Office Hanford Identification (HID) PIA, Richland Operations Office (69.08 KB) More Documents & Publications Integrated Safety Management Workshop Registration, PIA, Idaho National Laboratory Occupational Medicine - Assistant PIA, Idaho National Laboratory Manchester Software 1099 Reporting PIA, Idaho National

  1. With a bloody union jack on top: The first generation British atomic deterrent. Master`s thesis

    SciTech Connect (OSTI)

    Kaplan, E.A.

    1995-09-20

    Britain constructed an atomic deterrent to influence both the United States and Soviet Union. The process of research and development was both long and difficult. The atomic bomb, first tested in 1952, was a remarkable success. By comparison, the delivery device, the V-bomber, was a failure. While the aircraft produced were excellent, they were deployed too late in too few numbers to be effective in an independent role. Only as part of a larger offensive with the Strategic Air Command could they make a valuable contribution. However, the program`s military failure was offset by its political success. Reopened atomic relations with the United States strengthened British security by providing London with the most modern nuclear weapons and delivery systems.

  2. Secretary Chu and Energy Department Officials to Continue Post-State of the Union Efforts to Highlight Obama Administration’s Commitment to American Energy

    Broader source: Energy.gov [DOE]

    Energy Secretary Steven Chu, Deputy Secretary Daniel Poneman and other senior Energy Department officials will participate in events across the country to highlight President Obama’s State of the Union address and discuss the Obama Administration’s commitment to American energy.

  3. Ordered transport and identification of particles

    DOE Patents [OSTI]

    Shera, E.B.

    1993-05-11

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  4. Ordered transport and identification of particles

    DOE Patents [OSTI]

    Shera, E. Brooks

    1993-01-01

    A method and apparatus are provided for application of electrical field gradients to induce particle velocities to enable particle sequence and identification information to be obtained. Particle sequence is maintained by providing electroosmotic flow for an electrolytic solution in a particle transport tube. The transport tube and electrolytic solution are selected to provide an electroosmotic radius of >100 so that a plug flow profile is obtained for the electrolytic solution in the transport tube. Thus, particles are maintained in the same order in which they are introduced in the transport tube. When the particles also have known electrophoretic velocities, the field gradients introduce an electrophoretic velocity component onto the electroosmotic velocity. The time that the particles pass selected locations along the transport tube may then be detected and the electrophoretic velocity component calculated for particle identification. One particular application is the ordered transport and identification of labeled nucleotides sequentially cleaved from a strand of DNA.

  5. Marshall Plan productivity assistance: A unique program of mass technology transfer and a precedent for the former Soviet Union

    SciTech Connect (OSTI)

    Silberman, J.M.; Weiss, C. Jr.; Dutz, M.

    1996-12-31

    The Productivity Program of the Marshall Plan made a major contribution to the increase in Western European productivity in the 1950s, well before there was significant policy liberalization, competition, or foreign investment in these countries. Prior to the program, European manufacturing and management practice was a generation behind the US, and productivity was one-third of US levels. The cost of this program over ten years was $300 million, or only 1.5% of Marshall Plan capital assistance. Its 1500 study tours brought tens of thousands of people from European and Asian countries to the United States to observe management and production. On returning home, tour members vigorously spread new ideas throughout their countries, which also received a wide variety of follow-up technical services. Europe`s leaders supported national productivity drives out of fear of communism and social unrest, not in response to competitive market forces. The drives helped firms achieve almost immediate productivity gains with little new investment. This relatively inexpensive idea could increase incomes and improve the supply and variety of consumer goods in present-day Eastern Europe and the former Soviet Union. 17 refs., 3 tabs.

  6. American press coverage of US-Soviet relations, the Soviet Union, nuclear weapons, arms control, and national security: A bibliography

    SciTech Connect (OSTI)

    Dorman, W.A.; Manoff, R.K.; Weeks, J.

    1988-01-01

    This bibliography covers work that addresses coverage of nuclear and arms control issues, defense, the Soviet Union, and Soviet-American relations by the American news media between 1965 and 1988. Material selected for inclusion either discusses press performance or addresses conditions -- such as classification of information -- that directly impact on media coverage of such issues. Bodies of literature on media coverage of conflict elsewhere in the world lie outside the Center's current mandate (which has shaped the parameters of this bibliography) except insofar as such conflicts are presented by the news media specifically in the context of US-Soviet relations. Much the same is true of such issues as the North-South flow of information and the debate over calls for a New World Information Order. However, the authors have decided to include assessments of American media coverage of the Vietnam War as a case study of a watershed conflict that raised many of the issues discussed throughout this literature in a particularly compelling way.

  7. Nuclear Materials Identification System Operational Manual

    SciTech Connect (OSTI)

    Chiang, L.G.

    2001-04-10

    This report describes the operation and setup of the Nuclear Materials Identification System (NMIS) with a {sup 252}Cf neutron source at the Oak Ridge Y-12 Plant. The components of the system are described with a description of the setup of the system along with an overview of the NMIS measurements for scanning, calibration, and confirmation of inventory items.

  8. Progress toward identification of gluonic states

    SciTech Connect (OSTI)

    Chanowitz, M.S.

    1987-05-29

    Progress in the last two years toward identification of gluonic states is reviewed. Discovery of additional pseudoscalars tends to confirm the glueball interpretation of iota(1460). A variety of evidence indicates new physics in the J = 1 channel in the E mass region. 65 refs., 1 tab.

  9. Material identification employing a grating spectrometer

    DOE Patents [OSTI]

    Gornushkin, Ignor B.; Winefordner, James D.; Smith, Benjamin W.

    2007-01-09

    Multi-ordered spectral data is obtained from various known substances and is stored in a spectral library. The identification of an unknown material is accomplished by correlating the sample's multi-ordered spectrum against all or a portion of the spectrum in the library, and finding the closest match.

  10. Tier identification (TID) for tiered memory characteristics

    SciTech Connect (OSTI)

    Chang, Jichuan; Lim, Kevin T; Ranganathan, Parthasarathy

    2014-03-25

    A tier identification (TID) is to indicate a characteristic of a memory region associated with a virtual address in a tiered memory system. A thread may be serviced according to a first path based on the TID indicating a first characteristic. The thread may be serviced according to a second path based on the TID indicating a second characteristic.