National Library of Energy BETA

Sample records for union agu external

  1. American Geophysical Union (AGU) Fall Meeting | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Geophysical Union (AGU) Fall Meeting American Geophysical Union (AGU) Fall Meeting December 14, 2015 8:00AM EST to December 18, 2015 6:00PM EST With nearly 24,000 attendees, AGU Fall Meeting is the largest Earth and space science meeting in the world. Now in its 48th year, AGU Fall Meeting is the best place to present your research; hear about the latest discoveries, trends, and challenges in the field; and network and make connections that can enhance your career. AGU Fall Meeting

  2. Sandians Participate in 46th Annual American Geophysical Union (AGU)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Conference Participate in 46th Annual American Geophysical Union (AGU) Conference - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing

  3. Visit us at the American Geophysical Union (AGU) Fall Meeting, Booth#1211 |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Dec 14-18th us at the American Geophysical Union (AGU) Fall Meeting, Booth#1211 | Dec 14-18th - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization

  4. AGU SubTER Town Hall Presentation 2015 | Department of Energy

    Energy Savers [EERE]

    AGU SubTER Town Hall Presentation 2015 AGU SubTER Town Hall Presentation 2015 PDF icon AGU SubTER Townhall 2015.pdf More Documents & Publications SubTER Fact Sheet SubTER Presentation at Town Hall - American Geophysical Union

  5. AGU Fall Meeting 2014

    Broader source: Energy.gov [DOE]

    The American Geophysical Union's 47th Annual Fall Meeting will showcase groundbreaking research in the geosciences.

  6. New Mars rover findings revealed at American Geophysical Union...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mars rover findings revealed at AGU conference New Mars rover findings revealed at American Geophysical Union conference A group of scientists revealed that the Curiosity rover...

  7. ARM - ARM at AGU 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CenterARM at AGU 2011 Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes107 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 ENA 1 GOAMAZON 7 MAGIC 15 MC3E 17 PECAN 3 SGP 7 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field Notes Blog Events

  8. Visit us at the American Geophysical Union (AGU) Fall Meeting...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... hear about the latest discoveries, trends, and challenges in the field; and network ... and space science community for discussions of emerging trends and the latest research. ...

  9. ARM - 2009 AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Center2009 AGU Presentations Featuring ARM Data Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes107 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 ENA 1 GOAMAZON 7 MAGIC 15 MC3E 17 PECAN 3 SGP 7 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News

  10. ARM - AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CenterAGU Presentations Featuring ARM Data Media Contact Hanna Goss hanna-dot-goss-at-pnnl-dot-gov @armnewsteam Field Notes Blog Topics Field Notes107 AGU 3 AMIE 10 ARM Aerial Facility 2 ARM Mobile Facility 1 6 ARM Mobile Facility 2 47 ARM Mobile Facility 3 1 BAECC 1 BBOP 4 ENA 1 GOAMAZON 7 MAGIC 15 MC3E 17 PECAN 3 SGP 7 STORMVEX 29 TCAP 3 Search News Search Blog News Center All Categories What's this? Social Media Guidance News Center All Categories Features and Releases Facility News Field

  11. Agreement Type Union

    National Nuclear Security Administration (NNSA)

    Union of North America 872 14 International Union of Oprating Engineers (Maintenance Engineers) 501 22 Local Joint Executive Board of Las vegas Culinary Workers 226 49...

  12. Enel Union Fenosa Renovables EUFER formerly Union Fenosa Energia...

    Open Energy Info (EERE)

    Fenosa Renovables EUFER formerly Union Fenosa Energia Especiales Jump to: navigation, search Name: Enel Union Fenosa Renovables (EUFER) (formerly Union Fenosa Energia Especiales)...

  13. External Links

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Links External Links This page contains links to web sites and pages having to do with the Federal Energy Technology Network, Department of Energy, and Energy related ...

  14. Agreement Type Union

    National Nuclear Security Administration (NNSA)

    Type Union Local #/Name Number of Employees Project Labor Agreement International Association of Heat and Frost Insulators and Allied Workers 135 2 International Brothehood of Boilermakers, Iron Ship Builders, Blacksmith Forgers and Helpers 92 0 International Union of Bricklayers & Allied Craftsmen 13 0 Regional Council of Carpenters 1780 & 1977 13 Operative Plasterers and Cement Mason International Association Operative Plasterers and Cement Mason International Association 1

  15. Union Valley | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Union Valley Union Valley This document discusses Union Valley. Topics include: * The area's safety * Any use limitations for the area * History and cleanup background for this area * How DOE's cleanup program addressed the problem PDF icon Union Valley More Documents & Publications Melton Valley Watershed Groundwater Contamination and Treatment at Department of Energy Sites Groundwater Contamination and Treatment at Department of Energy Sites - 2008

  16. Unions, LANL sign labor agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unions, LANL sign labor agreements Unions, LANL sign labor agreements The New Mexico Building and Construction Trades Council and Los Alamos National Security LLC, announced the signing of a series of labor agreements that affect nearly 750 construction and maintenance workers. September 21, 2012 Jay Johnson renews the contracts with the Laboratory's union workers. Jay Johnson (left) associate director for maintenance and infrastructure planning, renews the contracts with the Laboratory's union

  17. MEETINGS WITH UNION OFFICIALS | Department of Energy

    Energy Savers [EERE]

    MEETINGS WITH UNION OFFICIALS MEETINGS WITH UNION OFFICIALS Guidance as to how to handle requests from union officials to meet with Department officials so that there is no undue legal risk. PDF icon GC GUIDANCE ON MEETINGS WITH UNION OFFICIALS More Documents & Publications AFGE Local 928 MEETINGS WITH UNION OFFICIALS NETL AFGE 1995 MEETINGS WITH UNION OFFICIALS NETL AFGE 1104

  18. Unions, LANL sign labor agreements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the contracts with the Laboratory's union workers. To the right of Johnson are Ray Baca of the New Mexico Building and Construction Trades Council and Tim Babicke and Gerard...

  19. GC GUIDANCE ON MEETINGS WITH UNION OFFICIALS

    Office of Environmental Management (EM)

    MEETINGS WITH UNION OFFICIALS Department officials often receive requests to meet with officials of labor unions whose members are employees of Department contractors. Department officials should feel free to meet with such union officials subject to this guidance. Department officials must take care, however, not to insert themselves or the government inappropriately into the relationship between the unions and the contractors Sometimes unions will wish to meet with Department officials simply

  20. ARM - External Data Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govExternal Data Center External Data Center Order Data Description of External Data Streams Data Viewers and Plots (selected data sets) XDC Documentation External Data Center The ARM External Data Center (XDC) at Brookhaven National Laboratory identifies sources and acquires data, called "external data", to augment the data being generated within the program. The scientific need and the priorities for acquiring, processing and archiving the external data-streams are established by the

  1. FORT UNION DEEP

    SciTech Connect (OSTI)

    Lyle A. Johnson Jr.

    2002-03-01

    Coalbed methane (CBM) is currently the hottest area of energy development in the Rocky Mountain area. The Powder River Basin (PRB) is the largest CBM area in Wyoming and has attracted the majority of the attention because of its high permeability and relatively shallow depth. Other Wyoming coal regions are also being targeted for development, but most of these areas have lower permeability and deeper coal seams. This project consists of the development of a CBM stimulation system for deep coal resources and involves three work areas: (1) Well Placement, (2) Well Stimulation, and (3) Production Monitoring and Evaluation. The focus of this project is the Washakie Basin. Timberline Energy, Inc., the cosponsor, has a project area in southern Carbon County, Wyoming, and northern Moffat County, Colorado. The target coal is found near the top of the lower Fort Union formation. The well for this project, Evans No.1, was drilled to a depth of 2,700 ft. Three coal seams were encountered with sandstone and some interbedded shale between seams. Well logs indicated that the coal seams and the sandstone contained gas. For the testing, the upper seam at 2,000 ft was selected. The well, drilled and completed for this project, produced very little water and only occasional burps of methane. To enhance the well, a mild severity fracture was conducted to fracture the coal seam and not the adjacent sandstone. Fracturing data indicated a fracture half-length of 34 ft, a coal permeability of 0.2226 md, and permeability of 15.3 md. Following fracturing, the gas production rate stabilized at 10 Mscf/day within water production of 18 bpd. The Western Research Institute (WRI) CBM model was used to design a 14-day stimulation cycle followed by a 30-day production period. A maximum injection pressure of 1,200 psig to remain well below the fracture pressure was selected. Model predictions were 20 Mscf/day of air injection for 14 days, a one-day shut-in, then flowback. The predicted flowback was a four-fold increase over the prestimulation rate with production essentially returning to prestimulation rates after 30 days. The physical stimulation was conducted over a 14-day period. Problems with the stimulation injection resulted in a coal bed fire that was quickly quenched when production was resumed. The poststimulation, stabilized production was three to four times the prestimulation rate. The methane content was approximately 45% after one day and increased to 65% at the end of 30 days. The gas production rate was still two and one-half times the prestimulation rate at the end of the 30-day test period. The field results were a good match to the numerical simulator predictions. The physical stimulation did increase the production, but did not produce a commercial rate.

  2. FORT UNION DEEP

    SciTech Connect (OSTI)

    Lyle A. Johnson Jr.

    2002-09-01

    Coalbed methane (CBM) is currently the hottest area of energy development in the Rocky Mountain area. The Powder River Basin (PRB) is the largest CBM area in Wyoming and has attracted the majority of the attention because of its high permeability and relatively shallow depth. Other Wyoming coal regions are also being targeted for development, but most of these areas have lower permeability and deeper coal seams. This project consists of the development of a CBM stimulation system for deep coal resources and involves three work areas: (1) Well Placement, (2) Well Stimulation, and (3) Production Monitoring and Evaluation. The focus of this project is the Washakie Basin. Timberline Energy, Inc., the cosponsor, has a project area in southern Carbon County, Wyoming, and northern Moffat County, Colorado. The target coal is found near the top of the lower Fort Union formation. The well for this project, Evans No.1, was drilled to a depth of 2,700 ft. Three coal seams were encountered with sandstone and some interbedded shale between seams. Well logs indicated that the coal seams and the sandstone contained gas. For the testing, the upper seam at 2,000 ft was selected. The well, drilled and completed for this project, produced very little water and only occasional burps of methane. To enhance the well, a mild severity fracture was conducted to fracture the coal seam and not the adjacent sandstone. Fracturing data indicated a fracture half-length of 34 ft, a coal permeability of 0.2226 md, and permeability of 15.3 md. Following fracturing, the gas production rate stabilized at 10 Mscf/day within water production of 18 bpd. The Western Research Institute (WRI) CBM model was used to design a 14-day stimulation cycle followed by a 30-day production period. A maximum injection pressure of 1,200 psig to remain well below the fracture pressure was selected. Model predictions were 20 Mscf/day of air injection for 14 days, a one-day shut-in, then flowback. The predicted flowback was a four-fold increase over the prestimulation rate with production essentially returning to prestimulation rates after 30 days. The physical stimulation was conducted over a 14-day period. Problems with the stimulation injection resulted in a coal bed fire that was quickly quenched when production was resumed. The poststimulation, stabilized production was three to four times the prestimulation rate. The methane content was approximately 45% after one day and increased to 65% at the end of 30 days. The gas production rate was still two and one-half times the prestimulation rate at the end of the 30-day test period. The field results were a good match to the numerical simulator predictions. The physical stimulation did increase the production, but did not produce a commercial rate.

  3. New Energy Efficiency Standards for External Power Supplies to Cut

    Office of Environmental Management (EM)

    Consumers' Utility Bills | Department of Energy External Power Supplies to Cut Consumers' Utility Bills New Energy Efficiency Standards for External Power Supplies to Cut Consumers' Utility Bills February 3, 2014 - 12:30pm Addthis News Media Contact (202) 586-4940 WASHINGTON - Building on President Obama's State of the Union address, which called for reducing carbon pollution and helping communities move to greater energy efficiency, the Energy Department today announced new efficiency

  4. International Union for Conservation of Nature | Open Energy...

    Open Energy Info (EERE)

    Union for Conservation of Nature Jump to: navigation, search Logo: International Union for Conservation of Nature Name: International Union for Conservation of Nature Address: Rue...

  5. Agro Unione Ltda | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: Agro Unione Ltda Place: Brazil Product: Sugar and ethanol producer. References: Agro Unione Ltda1 This article is a stub. You can help OpenEI...

  6. Sandia Energy Earth Sciences Research Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Participate in 46th Annual American Geophysical Union (AGU) Conference http:energy.sandia.govsandians-participate-in-46th-annual-american-geophysical-union-agu-conference...

  7. Sandia Energy Carbon Capture

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Sandians Participate in 46th Annual American Geophysical Union (AGU) Conference http:energy.sandia.govsandians-participate-in-46th-annual-american-geophysical-union-agu-conferen...

  8. Union Eolica Panamena UEP | Open Energy Information

    Open Energy Info (EERE)

    Eolica Panamena UEP Jump to: navigation, search Name: Union Eolica Panamena (UEP) Place: Granada, Spain Sector: Wind energy Product: Granada-based wind project developer company,...

  9. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Agenda

    Office of Environmental Management (EM)

    06-05-09 HSS/Union Working Group Meeting June 11, 2009 1:00 - 2:30 pm EST FORS 7E-069 Call-in: 301-903-0688 SUBJECT: 2009 HSS/Union Task Progress Union Working Group Participants: 2008 Topical Union Leads Ron Ault/Tom Schaffer..................AFL-CIO Metal Trades Department Pete Stafford...................................... Building and Construction Trades Department Center for Construction Research & Training (BCTD CPWR) Chico McGill/Dennis Phelps............International Brotherhood of

  10. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Summary

    Office of Environmental Management (EM)

    23-09 HSS/Union Working Group Meeting 2009 HSS/Union Task Progress and Next Steps June 11, 2009 In introductory remarks, Glenn Podonsky, Chief Health, Safety and Security Officer, underscored HSS's commitment to engage in this collective effort with the Unions and stakeholders to improve worker health, safety and security across the DOE Complex. He provided an overview of the past several years of the HSS Focus Group effort in which the worker, through Union representatives and stakeholders,

  11. Wishart AGU 2013

    SciTech Connect (OSTI)

    Wishart, J. R.; Neumann, K.; Edenborn, H. M.; Hakala, J. A.; Yang, J.; Torres, M. E.; Colwell, F. S.

    2013-01-01

    Shales are a component of the terrestrial subsurface biosphere and may be colonized by microorganisms when temperature and fluid #31;flow are permitting. Assessing microbial community activity will be aided by the use of in situ sampling devices such as the osmosampler, an osmotically driven sampling device. Community analysis of shale samples remains a challenge and requires further methods development. The objectives of the work reported are: 1. to review geochemical and microbiological evidence for the possible microbial inhabitation of shale 2. to compare conditions among U.S. shale formations 3. to develop analytical techniques to evaluate microbial communities present in hydraulic fracturing #31;fluid.

  12. union publique HR

    ScienceCinema (OSTI)

    None

    2011-10-06

    Chers Collègues,Je me permets de vous rappeler qu'une réunion publique organisée par le Département HR se tiendra aujourd'hui:Vendredi 30 avril 2010 à 9h30 dans l'Amphithéâtre principal (café offert dès 9h00).Durant cette réunion, des informations générales seront données sur:le CERN Admin e-guide, qui est un nouveau guide des procédures administratives du CERN ayant pour but de faciliter la recherche d'informations pratiques et d'offrir un format de lecture convivial;le régime d'Assurance Maladie de l'Organisation (présentation effectuée par Philippe Charpentier, Président du CHIS Board) et;la Caisse de Pensions (présentation effectuée par Théodore Economou, Administrateur de la Caisse de Pensions du CERN).Une transmission simultanée de cette réunion sera assurée dans l'Amphithéâtre BE de Prévessin et également disponible à l'adresse suivante: http://webcast.cern.chJe me réjouis de votre participation!Meilleures salutations,Anne-Sylvie CatherinChef du Département des Ressources humaines__________________________________________________________________________________Dear Colleagues,I should like to remind you that a plublic meeting organised by HR Department will be held today:Friday 30 April 2010 at 9:30 am in the Main Auditorium (coffee from 9:00 am).During this meeting, general information will be given about:the CERN Admin e-guide which is a new guide to the Organization's administrative procedures, drawn up to facilitate the retrieval of practical information and to offer a user-friendly format;the CERN Health Insurance System (presentation by Philippe Charpentier, President of the CHIS Board) and;the Pension Fund (presentation by Theodore Economou, Administrator of the CERN Pension Fund).A simultaneous transmission of this meeting will be broadcast in the BE Auditorium at Prévessin and will also be available at the following address. http://webcast.cern.chI look forward to your participation!Best regards,Anne-Sylvie CatherinHead, Human Resources Department

  13. Union Temporal de Empresas UTE | Open Energy Information

    Open Energy Info (EERE)

    Temporal de Empresas UTE Jump to: navigation, search Name: Union Temporal de Empresas (UTE) Place: Spain Sector: Solar Product: Developer of PV solar parks. References: Union...

  14. AVIC Changli Union Energy | Open Energy Information

    Open Energy Info (EERE)

    Beijing Municipality, China Product: China-based JV to manufacture and sell zinc-air batteries. References: AVIC Changli Union Energy1 This article is a stub. You can help...

  15. Union, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    is a stub. You can help OpenEI by expanding it. Union is a city in Miami County and Montgomery County, Ohio. It falls under Ohio's 8th congressional district and Ohio's 3rd...

  16. Union of Concerned Scientists | Open Energy Information

    Open Energy Info (EERE)

    http:www.ucsusa.org About "The Union of Concerned Scientists is the leading science-based nonprofit working for a healthy environment and a safer world. UCS combines...

  17. External Technical Review Report

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    External Technical Review Report March 2010 U U . . S S . . D D e e p p a a r r t t m m e e n n t t o o f f E E n n e e r r g g y y O O f f f f i i c c e e o o f f E E n n v v i i r r o o n n m m e e n n t t a a l l M M a a n n a a g g e e m m e e n n t t External Technical Review (ETR) Process Guide September 2008 U.S. DOE Office of Environmental Management September 2008 External Technical Review Process Guide Page 2 of 37 TABLE OF CONTENTS 1.0 INTRODUCTION

  18. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2012 AGU Chapman Conference - Hawaii Bookmark and Share The American Geophysical Union (AGU) Chapman Conference on Remote Sensing of the Terrestrial Water Cycle will take place in...

  19. Clay-Union Electric Coop | Open Energy Information

    Open Energy Info (EERE)

    Clay-Union Electric Coop Jump to: navigation, search Name: Clay-Union Electric Coop Place: South Dakota Phone Number: 605-624-2673 Website: www.clayunionelectric.coop Facebook:...

  20. EERE Success Story-Iowa: West Union Green Transformation Project...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    West Union Green Transformation Project EERE Success Story-Iowa: West Union Green ... These grant funds will be used to close up their buildings-making them more energy ...

  1. Incorporating externalities in conservation programs

    SciTech Connect (OSTI)

    Jordan, J.L.

    1995-06-01

    As water utilities incorporate integrated resource planning in their management processes, it is necessary to incorporate the concept of externalities. This is particularly important as methods evolve of evaluating the costs and benefits of water conservation programs. The purpose of this article is to provide an introduction to the issues surrounding externalities, including their definition, methods of internalizing externalities, and a survey of ways to estimate costs and benefits of externalities. Although most discussions of externalities emphasize negative effects on the environment, this article will illustrate both positive and negative externalities associated with practicing water conservation.

  2. External split field generator

    DOE Patents [OSTI]

    Thundat, Thomas George (Knoxville, TN); Van Neste, Charles W. (Kingston, TN); Vass, Arpad Alexander (Oak Ridge, TN)

    2012-02-21

    A generator includes a coil disposed about a core. A first stationary magnetic field source may be disposed on a first end portion of the core and a second stationary magnetic field source may be disposed on a second end portion of core. The first and second stationary magnetic field sources apply a stationary magnetic field to the coil. An external magnetic field source may be disposed outside the coil to apply a moving magnetic field to the coil. Electrical energy is generated in response to an interaction between the coil, the moving magnetic field, and the stationary magnetic field.

  3. U.S.-European Union Joint Statement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    -European Union Joint Statement U.S.-European Union Joint Statement U.S.-European Union Joint Statement prepared as part of the International Partnership for a Hydrogen Economy PDF icon us_eu_hydrogen_summit_statement.pdf More Documents & Publications Microsoft Word - Document1 International Partnerships for the Hydrogen Economy Fact Sheet International Partnerships for the Hydrogen Economy Fact Sheet

  4. US - Former Soviet Union environmental management activities

    SciTech Connect (OSTI)

    1995-09-01

    The Office of Environmental Management (EM) has been delegated the responsibility for US DOE`s cleanup of nuclear weapons complex. The nature and the magnitude of the waste management and environmental remediation problem requires the identification of technologies and scientific expertise from domestic and foreign sources. This booklet makes comparisons and describes coordinated projects and workshops between the USA and the former Soviet Union.

  5. Conversion and enrichment in the Soviet Union

    SciTech Connect (OSTI)

    1991-04-01

    In the Soviet Union, just as in the West, the civilian nuclear industry emerged from research work undertaken for nuclear weapons development. At first, researchers tried various techniques for physical separation of uranium isotopes: electromagnetic and molecular-kinetic thermo-diffusion methods; gaseous diffusion; and centrifuge methods. All of those methods, which are based primarily on differences in the atomic mass of uranium isotopes, called for extensive research and the development of new, technically unprecedented equipment. Gradually gaseous diffusion and gas centrifuge technology became recognized as most feasible for industrial use, so research on other methods was terminated. Industrial-scale uranium enrichment in the Soviet Union began in 1949 using the gaseous diffusion method; by the early 1960s, centrifuge technology was in use on an industrial scale. All Soviet production of highly-enriched, weapons-grade uranium was halted in 1987. The Soviet Union now has four enrichment plants in operation (at classified locations), solely for civilian nuclear power needs. All four enrichment plants have centrifuge modules, and enrichment provided by gaseous diffusion accounts for less than 5% of their total output. Two of the four enrichment plants also incorporate facilities for conversion to uranium hexafluoride (UF{sub 6}).

  6. President Obama's Final State of the Union - Energy Department Supercut |

    Energy Savers [EERE]

    Department of Energy President Obama's Final State of the Union - Energy Department Supercut President Obama's Final State of the Union - Energy Department Supercut Addthis From climate change to wind and solar power to electric vehicles, President Obama touched on a lot of key energy topics in his final State of the Union address. He mentioned how the United States has cut carbon pollution more than any other country on earth and the fact that clean energy is cheaper than ever before.

  7. Deputy Secretary Roundtable Meeting with Unions | Department of Energy

    Office of Environmental Management (EM)

    Deputy Secretary Roundtable Meeting with Unions Deputy Secretary Roundtable Meeting with Unions Meeting Date: March 16, 2010 Documents Available for Download PDF icon Meeting Agenda PDF icon Meeting Summary PDF icon Safety and Security Reform Plan PDF icon Union Contact List More Documents & Publications Technical Standards Newsletter - December 2008 DOE Safety and Security Reform Meeting Active DPF for Off-Road Particulate Matter (PM) Control

  8. External Independent Review (EIR) Standard Operating Procedure...

    Broader source: Energy.gov (indexed) [DOE]

    External Independent Review (EIR) Standard Operating Procedure (SOP) - September 2010 More Documents & Publications External Independent Review (EIR) Standard Operating Procedure...

  9. The City of Union City | Open Energy Information

    Open Energy Info (EERE)

    Sector Wind energy Facility Type Community Wind Facility Status In Service Owner Performance Services Energy Purchaser AEP - Indiana Michigan Power Location Union City IL...

  10. Union County, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Places in Union County, Ohio Dublin, Ohio Magnetic Springs, Ohio Marysville, Ohio Milford Center, Ohio Plain City, Ohio Richwood, Ohio Unionville Center, Ohio Retrieved from...

  11. Kraftwerk Union KWU Siemens Power Generation | Open Energy Information

    Open Energy Info (EERE)

    Services Product: KWU is a provider of components and services to the commercial nuclear utility industry. References: Kraftwerk Union (KWU) - Siemens Power Generation.1...

  12. Illustrative Scenarios Tool (European Union) | Open Energy Information

    Open Energy Info (EERE)

    Summary LAUNCH TOOL Name: Illustrative Scenarios Tool (European Union) Focus Area: Propane Topics: Opportunity Assessment & Screening Website: www.eutransportghg2050.eucms...

  13. High Temperature Fuel Cells in the European Union

    Broader source: Energy.gov [DOE]

    Presentation on High Temperature Fuel Cells in the European Union to the High Temperature Membrane Working Group, May 25, 2004 in Philadelphia, PA.

  14. Union County, South Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Carlisle, South Carolina Jonesville, South Carolina Lockhart, South Carolina Monarch Mill, South Carolina Union, South Carolina Retrieved from "http:en.openei.orgw...

  15. Union County, Illinois: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Pass, Illinois Anna, Illinois Cobden, Illinois Dongola, Illinois Jonesboro, Illinois Mill Creek, Illinois Retrieved from "http:en.openei.orgwindex.php?titleUnionCounty,Il...

  16. Union County, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Climate Zone Number 2 Climate Zone Subtype A. Places in Union County, Florida Lake Butler, Florida Raiford, Florida Worthington Springs, Florida Retrieved from "http:...

  17. Union Bridge, Maryland: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Union Bridge, Maryland: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 39.5689895, -77.176927 Show Map Loading map... "minzoom":false,"mapping...

  18. West Union, New York: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    "alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":"" Hide Map West Union is a town in Steuben County, New York.1 References US Census Bureau...

  19. Union County, Arkansas: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Number 3 Climate Zone Subtype A. Places in Union County, Arkansas Calion, Arkansas El Dorado, Arkansas Felsenthal, Arkansas Huttig, Arkansas Junction City, Arkansas Norphlet,...

  20. Union County, New Jersey: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    New Jersey Strategic Energy LLC (New Jersey) Places in Union County, New Jersey Berkeley Heights, New Jersey Clark, New Jersey Cranford, New Jersey Elizabeth, New Jersey...

  1. AGU 2011 poster Craig Hill

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    St. Anthony Falls Laboratory, College of Science & Engineering, University of Minnesota, Minneapolis, MN 55414, USA 2 Energy-Water-Ecosystems Engineering, Wind and Water Power Technologies, Environmental Sciences Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831, USA Craig Hill 1 , Leonardo P. Chamorro 1 , Vincent S. Neary 2 , Budi Gunawan 2 , Scott Morton 1 , Fotis Sotiropoulos 1 Turbulence e ects of axial ow hydrokinetic turbines OS53A-1763 F. ACKNOWLEDGEMENTS is project was

  2. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - Agenda

    Office of Environmental Management (EM)

    Union Working Group Meeting December 4, 2008 1:00 - 4:00 pm EST FORS 7E-069 SUBJECT: 2008 HSS/Union Topical Wrap Up Meeting Facilitation by 2008 Topical Union Leads Ron Ault/Tom Schaffer............... AFL-CIO Metal Trades Department Pete Stafford/Patricia Quinn/.............Building and Construction Trades Department Center for Don Ellenberger Construction Research & Training (BCTD CPWR) Dennis Phelps.............................International Brotherhood of Electrical Workers [IBEW] Gary

  3. Sandia Energy Climate

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visit us at the American Geophysical Union (AGU) Fall Meeting, Booth1211 | Dec 14-18th http:energy.sandia.govvisit-us-at-the-american-geophysical-union-agu-fall-meeting-moscone...

  4. Sandia Energy Events

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Visit us at the American Geophysical Union (AGU) Fall Meeting, Booth1211 | Dec 14-18th http:energy.sandia.govvisit-us-at-the-american-geophysical-union-agu-fall-meeting-moscone...

  5. DOE Roundtable Meeting with Union Leaders | Department of Energy

    Office of Environmental Management (EM)

    Roundtable Meeting with Union Leaders DOE Roundtable Meeting with Union Leaders Meeting Date: January 25, 2011 Documents Available for Download PDF icon Meeting Agenda PDF icon Meeting Summary and Participants More Documents & Publications DOE/Labor Leadership Roundtable Meeting DOE/Labor Leadership Roundtable Meeting

  6. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - Union Lead Action Priorities

    Office of Environmental Management (EM)

    UNION TOPICAL LEAD PRIORITY ACTION SUBMITTALS FOR DECEMBER 4 HSS/UNION TOPICAL WRAP UP MEETING SMWIA Submittal of Action Priorities: The priorities below reflect SMWIA/training subcommittee input for moving forward in 2009 and beyond. 1. A pre-requisite requirement of OSHA-10 Hour Training for workers to gain access to DOE sites 2. Standardized training requirements across the DOE network of facilities supported by the NIEHS model for support for all building trades and sub crafts 3. Support for

  7. State of the Union 2015: President Obama's Remarks on Energy | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy State of the Union 2015: President Obama's Remarks on Energy State of the Union 2015: President Obama's Remarks on Energy

  8. Cogeneration in the former Soviet Union

    SciTech Connect (OSTI)

    Horak, W.C.

    1997-07-01

    The former Soviet Union made a major commitment to Cogeneration. The scale and nature of this commitment created a system conceptually different from Cogeneration in the west. The differences were both in scale, in political commitment, and in socio economic impact. This paper addresses some of the largest scale Cogeneration programs, the technology, and the residual impact of these programs. The integration of the Cogeneration and nuclear programs is a key focus of the paper. Soviet designed nuclear power plants were designed to produce both electricity and heat for residential and industrial uses. Energy systems used to implement this design approach are discussed. The significant dependence on these units for heat created an urgent need for continued operation during the winter. Electricity and heat are also produced in nuclear weapons production facilities, as well as power plants. The Soviets also had designed, and initiated construction of a number of nuclear power plants {open_quotes}ATETs{close_quotes} optimized for production of heat as well as electricity. These were canceled.

  9. Union job fight boiling at DOE cleanup sites

    SciTech Connect (OSTI)

    Setzer, S.W.

    1993-11-15

    The US DOE is facing a growing jurisdictional dispute over which unions will perform the majority of clean-up work at its facilities. Unions affiliated with the AFL-CIO Metal Trades Council representing operations employees at the sites believe they have a fundamental right to work. Unions in the AFL-CIO's Building and Construction Trades Dept. insist that they have a clear mandate under federal labor law and the Davis-Bacon Act. The issue has heated up in recent weeks at the policy level and is boiling in a contentious dispute at DOE's Fernald site in Ohio.

  10. Iowa: West Union Green Transformation Project | Department of Energy

    Office of Environmental Management (EM)

    West Union Green Transformation Project Iowa: West Union Green Transformation Project March 17, 2014 - 11:26am Addthis Utilizing funding from EERE and cost shares from other federal agencies, the City of West Union, Iowa, drilled geothermal wells in order to install a closed-loop geothermal heating and cooling system. The system is designed to serve 330,000 square feet of mixed used space in the downtown area, including 80% of the 60 downtown buildings. Funds have also been allocated to provide

  11. Iowa: West Union Green Transformation Project | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    West Union Green Transformation Project Iowa: West Union Green Transformation Project March 17, 2014 - 11:26am Addthis Utilizing funding from EERE and cost shares from other federal agencies, the City of West Union, Iowa, drilled geothermal wells in order to install a closed-loop geothermal heating and cooling system. The system is designed to serve 330,000 square feet of mixed used space in the downtown area, including 80% of the 60 downtown buildings. Funds have also been allocated to provide

  12. UNION CARBIDE MZALS DIVISION tiiAGARA FALLS, NEW YDRK

    Office of Legacy Management (LM)

    PRELIF",INARY SURVEY 0' ELECTRDMET iORPDF.&TiCIN UNION CARBIDE MZALS DIVISION tiiAGARA FALLS, NEW YDRK Work performed by the Health and Safety Research Division Dak Ridge National Laboratory Oak Ridge, Tennessee 37830 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Fornierly Utilized Sites-- Remedial Action Program ,ELECTRD?'ISi 60RPOR:TION UNiON CARBIDE METALS DIVlSIOti NiASARA FALLS, NEA YORK At the requests o f the

  13. External Technical Reviews | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Services Waste Management Tank Waste and Waste Processing External Technical Reviews External Technical Reviews Documents Available for Download March 31, 2006 Hanford ETR...

  14. Union City, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    This article is a stub. You can help OpenEI by expanding it. Union City is a city in Alameda County, California. It falls under California's 13th congressional district.12...

  15. Beijing ChangLi Union Energy Company | Open Energy Information

    Open Energy Info (EERE)

    Municipality, China Product: China-based technology company that research in zinc-air batteries (fuel cells). References: Beijing ChangLi Union Energy Company1 This article is a...

  16. Union Hill-Novelty Hill, Washington: Energy Resources | Open...

    Open Energy Info (EERE)

    help OpenEI by expanding it. Union Hill-Novelty Hill is a census-designated place in King County, Washington.1 References US Census Bureau 2005 Place to 2006 CBSA...

  17. Union Suppo Battery Co Ltd | Open Energy Information

    Open Energy Info (EERE)

    Suppo Battery Co Ltd Jump to: navigation, search Name: Union Suppo Battery Co Ltd Place: Shenyang, China Zip: 110015 Product: Liaoning-based manufacturer of rechargeable NiMH...

  18. Union Light, Heat & Power Co | Open Energy Information

    Open Energy Info (EERE)

    Name: Union Light, Heat & Power Co Place: Kentucky References: Energy Information Administration.1 EIA Form 861 Data Utility Id 19446 This article is a stub. You can help OpenEI...

  19. Union Power Cooperative- Residential Energy Efficient Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    Union Power Cooperative offers low interest loans to help its qualifying residential customers finance new, energy-efficient heat pumps. Interest rates, currently at 9%, will be fixed for the term...

  20. Active Labor Unions Interfacing with DOE – June 2014

    Broader source: Energy.gov [DOE]

    This information book provides an overview of what has been learned through the interface with representative labor unions and related stakeholders as well as accomplishments and current efforts to address any identified areas of concern.

  1. Comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

    Broader source: Energy.gov [DOE]

    This document is a comment submitted by Consumers Union regarding the Energy Star Verification Testing Program

  2. MGR External Events Hazards Analysis

    SciTech Connect (OSTI)

    L. Booth

    1999-11-06

    The purpose and objective of this analysis is to apply an external events Hazards Analysis (HA) to the License Application Design Selection Enhanced Design Alternative 11 [(LADS EDA II design (Reference 8.32))]. The output of the HA is called a Hazards List (HL). This analysis supersedes the external hazards portion of Rev. 00 of the PHA (Reference 8.1). The PHA for internal events will also be updated to the LADS EDA II design but under a separate analysis. Like the PHA methodology, the HA methodology provides a systematic method to identify potential hazards during the 100-year Monitored Geologic Repository (MGR) operating period updated to reflect the EDA II design. The resulting events on the HL are candidates that may have potential radiological consequences as determined during Design Basis Events (DBEs) analyses. Therefore, the HL that results from this analysis will undergo further screening and analysis based on the criteria that apply during the performance of DBE analyses.

  3. External Collaborations - Research - Cyclotron Institute

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Collaborations STAR detector offers a unique myriad of subsystems which can be utilized to distinguish decay photons from direct photons. A number of research projects involving Institute scientists are carried out at other large national and international accelerator facilities in collaboration with groups from other universities and laboratories worldwide. Many of these are directly complementary to the local experimental program but others, as described below, explore other

  4. State of the Union Remarks on Energy in Four Charts | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    the Union Remarks on Energy in Four Charts State of the Union Remarks on Energy in Four Charts January 22, 2015 - 10:23am Addthis Daniel Wood Daniel Wood Data Visualization and Cartographic Specialist, Office of Public Affairs Sarah Gerrity Sarah Gerrity Former Multimedia Editor, Office of Public Affairs More State of the Union Coverage Interested in hearing the President's energy and climate change related remarks from the State of the Union? Watch the video! In Tuesday's State of the Union

  5. Electricity Generation and Environmental Externalities: Case Studies

    Reports and Publications (EIA)

    1995-01-01

    Provides an overview of the economic foundation of externalities, the federal and state regulatory approaches, and case studies of the impacts of the externality policies adopted by three states.

  6. January 20, 2011, HSS Union Focus Group Meeting - Agenda

    Office of Environmental Management (EM)

    0-11 HSS/Union Focus Group Meeting January 20, 2011 2:00 - 3:00 PM (EST) Call-in: 301-903-0617 Agenda * Opening Remarks [G. Podonsky] * 2011 Strategic Initiatives - Status/Next Steps Overview - Safety & Security Reform Status [B. Eckroade/S. Kirchhoff] - NAPA Worker Dialogue [MJ Campagnone] - Aging Workforce [M. Ardaiz] - Training Assessment Pilots [L. Gasperow/J. Lozoya] * Safety Concerns: Safety Culture [J. Frederick] - DOE/EFCOG ISMS Task Team Report [P. Worthington] * DOE/Union

  7. External Technical Review Report | Department of Energy

    Energy Savers [EERE]

    External Technical Review Report External Technical Review Report This document has been developed to guide individuals and teams who will be involved in External Technical Reviews (ETR) of U.S. Department of Energy's Office of Environmental Management (DOE-EM) projects. PDF icon External Technical Review Report More Documents & Publications Technology Readiness Assessment Report Compilation of ETR Summaries Major Risk Factors Integrated Facility Disposition Project - Oak Ridge

  8. External Technical Reviews | Department of Energy

    Energy Savers [EERE]

    Waste Management » Tank Waste and Waste Processing » External Technical Reviews External Technical Reviews Documents Available for Download November 15, 2012 External Technical Review Report This document has been developed to guide individuals and teams who will be involved in External Technical Reviews (ETR) of U.S. Department of Energy's Office of Environmental Management (DOE-EM) projects. September 1, 2011 Peer Review of the ASCEM Program 2010 Full Document and Summary Versions are

  9. ARM - Publications: Science Team Meeting Documents: External...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Data Stream Review Wagener, Richard Brookhaven National Laboratory Ma, Lynn DOEBrookhaven National Laboratory Gregory, Laurie Brookhaven National Laboratory Tichler,...

  10. Energy & Science at the State of the Union Tonight

    Broader source: Energy.gov [DOE]

    When the President begins his third State of the Union address this evening at 9pm EST, several important women and men in the fields of energy, science and technology will be sitting in the Capitol Building alongside First Lady Michelle Obama.

  11. May 19, 2011, HSS/Union Focus Group Meeting - Agenda

    Office of Environmental Management (EM)

    16-11 HSS Focus Group Telecom Meeting Worker Health, Safety and Security Improvement Priorities/Task Activities May 19, 2011 Proposed AGENDA Introductory Remarks........................................................................ Glenn Podonsky Meeting Purpose/Intended Outcomes/Process.................. Pete Stafford/Mari-Jo Campagnone Priority Improvement Areas/Tasks Discussion * Safety & Security Reform.................................Bill Eckroade/Steve Kirchhoff/Unions * Background

  12. TONIGHT: @Energy Livetweets the State of the Union 2013 | Department of

    Energy Savers [EERE]

    Energy TONIGHT: @Energy Livetweets the State of the Union 2013 TONIGHT: @Energy Livetweets the State of the Union 2013 February 12, 2013 - 12:25pm Addthis Stay tuned as we livetweet the President's annual State of the Union Address later this evening. | Graphic by Sarah Gerrity, Energy Department. Stay tuned as we livetweet the President's annual State of the Union Address later this evening. | Graphic by Sarah Gerrity, Energy Department. Erin R. Pierce Erin R. Pierce Former Digital

  13. Sandia Energy - Sandia Gets $4M Energy Grant

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Permalink Gallery Phase 1 of WEC-Sim Experimental Testing Underway AGU Permalink Gallery Visit us at the American Geophysical Union (AGU) Fall Meeting, Booth1211 | Dec 14-18th...

  14. Ion source with external RF antenna

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Ji, Qing; Wilde, Stephen

    2005-12-13

    A radio frequency (RF) driven plasma ion source has an external RF antenna, i.e. the RF antenna is positioned outside the plasma generating chamber rather than inside. The RF antenna is typically formed of a small diameter metal tube coated with an insulator. An external RF antenna assembly is used to mount the external RF antenna to the ion source. The RF antenna tubing is wound around the external RF antenna assembly to form a coil. The external RF antenna assembly is formed of a material, e.g. quartz, which is essentially transparent to the RF waves. The external RF antenna assembly is attached to and forms a part of the plasma source chamber so that the RF waves emitted by the RF antenna enter into the inside of the plasma chamber and ionize a gas contained therein. The plasma ion source is typically a multi-cusp ion source.

  15. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - PRIORITY NEAR-TERM ACTION OVERVIEW

    Office of Environmental Management (EM)

    Topical Wrap-Up Meeting December 4, 2008 PRIORITY NEAR-TERM ACTION OVERVIEW Background: Union representatives who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form working groups to address union identified health and safety issues by topical area. 2008 meetings were held to specifically address the topical areas of interest and concern related to worker health and safety at DOE sites: Training, 851 Rule Implementation,

  16. Early Internal and External Dose Magnitude Estimation

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal and External Dose Estimation (initial version: 08/2008, current version: 10/2015) Early Internal and External Dose Magnitude Estimation The Radiation Emergency Assistance Center/Training Site REAC/TS PO Box 117, MS-39 Oak Ridge, TN 37831 (865)576-3131 http://orise.orau.gov/reacts prepared by: Stephen L. (Steve) Sugarman, MS, CHP, CHCM Health Physics Project Manager Cytogenetic Biodosimetry Laboratory Coordinator Early Internal and External Dose Estimation (initial version: 08/2008,

  17. External Power Supplies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    External Power Supplies External Power Supplies The Department of Energy (DOE) develops standardized data templates for reporting the results of tests conducted in accordance with current DOE test procedures. Templates may be used by third-party laboratories under contract with DOE that conduct testing in support of ENERGY STAR® verification, DOE rulemakings, and enforcement of the federal energy conservation standards. File External Power Supplies -- v2.0 More Documents & Publications

  18. External Independent Review (EIR) Standard Operating Procedure...

    Office of Environmental Management (EM)

    (EIR) Standard Operating Procedure (SOP) September 2010 External Independent Review (EIR) Standard Operating Procedure (SOP) Septemebr 2010 Contractor Statement of Work (SOW)...

  19. Integrated External Aerodynamic and Underhood Thermal Analysis...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    - PACCAR Integrated Underhood Thermal and External Aerodynamics- Cummins Cummins SuperTruck Program - Technology and System Level Demonstration of Highly Efficient and Clean,...

  20. External Advisory Committee | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Controls Director, Government Affairs & External Communications Web Site D Marc Anderson Marc Anderson University of Wisconsin Professor Web Site David Cahill David Cahill...

  1. Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Princeton Plasma Physics Lab Amitava Bhattacharjee Elected a Fellow of the American Geophysical Union By Raphael Rosen September 18, 2015 Tweet Widget Google Plus One Share on Facebook PPPL Physicist Amitava Bhattacharjee (Photo by Elle Starkman) PPPL Physicist Amitava Bhattacharjee Amitava Bhattacharjee, head of the Theory Department at the Princeton Plasma Physics Laboratory (PPPL) and professor of astrophysical sciences at Princeton University, has been elected a fellow of the American

  2. President Obama Praises NAMII in State of the Union Address

    Broader source: Energy.gov [DOE]

    In his 2013 State of the Union address, President Obama used the National Additive Manufacturing Institute (NAMII) as a model of the potential for innovation in manufacturing in the U.S. His address made it clear that his Administration is making the revitalization of the manufacturing sector a priority, stating that he plans to make the U.S. "a magnet for new jobs and manufacturing." He laid out a plan for spurring growth in manufacturing in the following statement:

  3. Rotary union for use with ultrasonic thickness measuring probe

    DOE Patents [OSTI]

    Nachbar, Henry D. (Schenectady, NY)

    1992-01-01

    A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body.

  4. Rotary union for use with ultrasonic thickness measuring probe

    DOE Patents [OSTI]

    Nachbar, H.D.

    1992-09-15

    A rotary union for rotatably supporting an ultrasonic probe operable to nondestructively measure the thickness of steam generator tubes to determine the amount of corrosion experienced by the tubes includes a stationary body having a bore therethrough and an outlet drain, and a fitting rotatably mounted within the upper end of the body. The fitting has a bore aligned with the bore of the body. An electrical cable positioned within a water supply tube in an annular arrangement passes through the bore of the body and the bore of the fitting. This annular arrangement, in turn, is positioned within a connector element which extends outwardly from the fitting bore and is connected to the ultrasonic probe. An elastomeric lower bushing seals the annular arrangement to the lower end of the rotary union body and an elastomeric upper bushing seals the connector element to the fitting to permit the connector element and the ultrasonic probe connected thereto to rotate with the fitting relative to the body. The lower and upper bushings permit water to be passed through the annular arrangement and into the ultrasonic probe and thereafter discharged between the annular arrangement and the connector element to the outlet drain of the rotary union body. 5 figs.

  5. The transportation external coordination working group

    SciTech Connect (OSTI)

    1995-10-01

    In an effort to improve coordinated interactions between the United States Department of Energy (DOE) and external groups interested in transportation activities, DOE established the Transportation External Coordination Working Group (TEC/WG). Membership includes representatives from State, Tribal and local governments, industry, and professional organizations. All DOE programs with significant transportation programs participate.

  6. United States-assisted studies on dose reconstruction in the former Soviet Union

    SciTech Connect (OSTI)

    Anspaugh, L.R.; Bouville, A.

    1995-12-01

    Following the Chernobyl accident, the US and the USSR entered into an agreement to work on the safety of civilian nuclear reactors; one aspect of that work was to study the environmental transport and health effects of radionuclides released by the accident. After the break-up of the USSR separate agreements were established between the US and Ukraine, Belarus, and Russia to continue work on dose reconstruction and epidemiologic studies of health effects from exposure to external radiation and the incorporation of radionuclides. Studies in Belarus and Ukraine related to the Chernobyl accident now emphasize epidemiologic: studies of childhood-thyroid cancer and leukemia, and eye-lens-cataract formation in liquidators. Supporting studies on dose reconstruction emphasize a variety of ecological, physical, and biological techniques. Studies being conducted in Russia currently emphasize health effects in the workers and the population around the Mayak Industrial Association. As this production complex is an analogue of the US Hanford Works, advantage is being taken of the US experience in conducting a similar, recently completed dose-reconstruction study. In all cases the primary work on dose reconstruction is being performed by scientists from the former Soviet Union. US assistance is in the form of expert consultation and participation, exchange visits, provision of supplies and equipment, and other forms of local assistance.

  7. Planning for a Sustainable Future of the Cincinnati Union Terminal

    SciTech Connect (OSTI)

    2012-04-30

    The Cincinnati Museum Center invited a number of local stakeholders, political leaders, nationally and internationally recognized design professionals and the Design Team, that has been engaged to help shape the future of this remarkable resource, to work together in a Workshop that would begin to shape a truly sustainable future for both the Museum and its home, the Union Terminal, one of the most significant buildings in America. This report summarizes and highlights the discussions that took place during the Workshop and presents recommendations for shaping a direction and a framework for the future.

  8. Union City, New Jersey 07087 Dear Mayor Walter:

    Office of Legacy Management (LM)

    En&igy ' - Washyon, DC20585 APR 0 3 ,I995 ,, -,,w ' -..-- -....-.. r- 11--a.-._ 3715 Paisade Avenue - .*<;1 Union City, New Jersey 07087 Dear Mayor Walter: Secretary of Energy Hazel O'Leary has announced a new approach to openness in the Department of Energy (DOE) and its communications with the public. In support of this initiative, we to forward the enclosed information related,to the former Callite performed work for DOE or its site in your jurisdiction that agencies.' This'information

  9. External Technical Reviews | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    been developed to guide individuals and teams who will be involved in External Technical Reviews (ETR) of U.S. Department of Energy's Office of Environmental Management (DOE-EM)...

  10. PNNL: About PNNL: Communications & External Relations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Communications & External Relations At Pacific Northwest National Laboratory (PNNL), scientific breakthroughs happen everyday. So does being a good neighbor. From cultivating relationships with our community to building advocacy within the region, and communicating scientific breakthroughs with the media. The Communications and External Relations staff provides the resources and programs to ensure that PNNL is an asset to the northwest region and the local community. Community and Regional

  11. Transportation External Coordination Working Group (TEC)

    Office of Environmental Management (EM)

    Transportation External Coordination Working Group (TEC) July 17-19, 2001 Cincinnati, Ohio Meeting Summary The Transportation External Coordination Working Group (TEC) held its 19 th semi-annual meeting July 17-19, 2001, in Cincinnati, Ohio. One hundred fifteen people attended (see Appendix A for listing of participants). Jim Carlson, U.S. Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) and TEC co-chair, welcomed participants to the meeting. He then introduced

  12. Transportation External Coordination Working Group (TEC)

    Office of Environmental Management (EM)

    Portland, Oregon - February 6-7, 2001 Transportation External Coordination Working Group (TEC) February 6-7, 2001 Portland, Oregon Meeting Summary The Transportation External Coordination Working Group (TEC) held its 18 th semi-annual meeting February 6-7, 2001, in Portland, Oregon. Attending were 125 representatives from national, State, Tribal and local government organizations, industry and professional groups and other interested parties/DOE programs who meet to address a variety of issues

  13. External Participants Who Are DOE Employees

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Participants Who Are DOE Employees External JLF participants with DOE badges can obtain computer access and have their LTRAIN and IWS records properly registered in the LLNL system by having the LLNL Badge Office enroll them as an LSP (Laboratory Service Person). For such a participant, make a badge request Attention: Karen Waltjen stating "request for LSP only" on the purpose line. Upon arrival, information will be encoded on the DOE badge at the LLNL Badge Office

  14. FINAL Transportation External Coordination Working Group (TEC)

    Office of Environmental Management (EM)

    Transportation External Coordination Working Group (TEC) January 28-30, 2002 New Orleans, Louisiana Meeting Summary The Transportation External Coordination Working Group (TEC) held its 20 th semi-annual meeting January 28-30, 2002, in New Orleans, Louisiana. This was the tenth anniversary of TEC, and 102 attendees from national, State, Tribal, and local government organizations; industry and professional groups and other interested parties in the U.S. Department of Energy (DOE) programs, met

  15. Intergovernmental & External Affairs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Affairs Intergovernmental & External Affairs Photo courtesy of U.S. Conference of Mayors Photo courtesy of U.S. Conference of Mayors Our Mission CI's Intergovernmental and External Affairs office strives to assure access by state, local, territorial and Tribal governments, environmental, industry and consumer interests to Departmental processes concerned with the development and implementation of national energy policies and programs. The office also provides responsive and timely

  16. Negative ion source with external RF antenna

    DOE Patents [OSTI]

    Leung, Ka-Ngo; Hahto, Sami K.; Hahto, Sari T.

    2007-02-13

    A radio frequency (RF) driven plasma ion source has an external RF antenna, i.e. the RF antenna is positioned outside the plasma generating chamber rather than inside. The RF antenna is typically formed of a small diameter metal tube coated with an insulator. An external RF antenna assembly is used to mount the external RF antenna to the ion source. The RF antenna tubing is wound around the external RF antenna assembly to form a coil. The external RF antenna assembly is formed of a material, e.g. quartz, which is essentially transparent to the RF waves. The external RF antenna assembly is attached to and forms a part of the plasma source chamber so that the RF waves emitted by the RF antenna enter into the inside of the plasma chamber and ionize a gas contained therein. The plasma ion source is typically a multi-cusp ion source. A converter can be included in the ion source to produce negative ions.

  17. Watch Energy Highlights from the 2016 State of the Union | Department of

    Energy Savers [EERE]

    Energy 2016 State of the Union Watch Energy Highlights from the 2016 State of the Union January 13, 2016 - 3:19pm Addthis Watch the Energy highlights from President Obama's final State of the Union delivered January 12, 2016. | Video by Simon Edelman, Energy Department. Simon Edelman Simon Edelman Chief Creative Officer Allison Lantero Allison Lantero Digital Content Specialist, Office of Public Affairs From climate change to wind and solar power to electric vehicles, President Obama touched

  18. Cooperation with the New Independent States of the Former Soviet Union |

    Office of Environmental Management (EM)

    Department of Energy Cooperation with the New Independent States of the Former Soviet Union Cooperation with the New Independent States of the Former Soviet Union The following Acquisition Letter 95-14 includes the terms and conditions (both intellectual property and non-intellectual property) that are to be used in subcontracts between DOE national laboratories and institutes in the New Independent States of the Former Soviet Union (NIS). There are two patent and data clauses - one for the

  19. #SOTU Roundup: Energy Highlights from the 2014 State of the Union |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy #SOTU Roundup: Energy Highlights from the 2014 State of the Union #SOTU Roundup: Energy Highlights from the 2014 State of the Union January 29, 2014 - 12:45pm Addthis On January 28, 2014, President Obama delivered his fifth State of the Union address at the U.S. Capitol Building. Above, check out the energy and climate change highlights from the speech. | Video compilation by Matty Greene, Energy Department. Marissa Newhall Marissa Newhall Director of Digital Strategy

  20. PRELIMINARY SURVEY OF THE UNION CARBIDE CORPORATION METALS DIVISION PLANT, NIAGARA FALLS, NEW YORK

    Office of Legacy Management (LM)

    e - .' N"lr 7% PRELIMINARY SURVEY OF THE UNION CARBIDE CORPORATION METALS DIVISION PLANT, NIAGARA FALLS, NEW YORK Work performed by the Health and Safety Research Division Oak Ridge Natjonal Laboratory Oak Ridge, Tennessee 37830 December 1980 OAK RIDGE NATIONAL LABORATORY operated by UNION CARBIDE CORPORATION for the DEPARTMENT OF ENERGY as part of the Formerly Utilized Sites-- Remedial Action Program PRELIMINARY SURVEY OF THE UNION CARBIDE CORPORATION METALS DIVISION PLANT, NIAGARA FALLS,

  1. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Assessing Training Gaps in ORPS

    Office of Environmental Management (EM)

    Assessing Training Gaps Using DOE's Occurrence Reporting and Processing System (ORPS) HSS/Union Meeting June 11, 2009 2 Highlights Training is a contributing cause in about 15% of DOE operational events (about 150 per year) * Poor management practices are the most common training cause * Poor training programs are next (cited about 50 times per year) Of ORPS-reported injuries, about 17% had training as a contributing cause (101 of 594) * About 30 per year HS-30 will develop a report with a few

  2. ARM - 2014 AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    measurements onboard the G-1 research aircraft during the GoAmazon campaign. John Shilling; Mikhail Pekour; Edward Fortner; John Hubbe; Karla Longo; Scpt Martin; Fan...

  3. ARM - 2011 AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... DH Lowenthal, IB Mccubbin, LM Avallone, GG Mace, J French, LD Oolman 11:20 am, M-West ... Deng, M Dunn, R Hogan, D Huang, MP Jensen, GG Mace, SA McFarlane, E O'Connor, A Protat, M ...

  4. ARM - 2012 AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Measurements Collected by the ARM Program GG Mace, S Cooper, DJ Posselt 3:10 pm, M-West ... G Bland, CN Flagg, SA Klein, P Kollias, GG Mace, M Reynolds, SE Schwartz, P Siebesma, ...

  5. ARM - 2013 AGU Presentations Featuring ARM Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Presentation Type Session ID and Presentation Title Presenters Time and Location A13J. From Air Pollution to Climate Changes in Asia III Oral A13J-03. Identification and Separation ...

  6. A look back at Union Carbides [first] 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    first 20 Years in Nuclear Energy The Gaseous Diffusion Plants Note: Union Carbide Nuclear Division, which started out as Carbide and Carbon Chemicals Company, operated the...

  7. Union zur F rderung von Oel und Proteinpflanzen Ufop | Open Energy...

    Open Energy Info (EERE)

    zur F rderung von Oel und Proteinpflanzen Ufop Jump to: navigation, search Name: Union zur Frderung von Oel- und Proteinpflanzen (Ufop) Place: Germany Product: Germany-based...

  8. Join @Energy for the 2016 State of the Union Address | Department of Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    @Energy for the 2016 State of the Union Address Join @Energy for the 2016 State of the Union Address January 11, 2016 - 11:10am Addthis Join us for live coverage of the State of the Union, starting at 9PM ET on Tuesday. | Image courtesy of Carly Wilkins. Join us for live coverage of the State of the Union, starting at 9PM ET on Tuesday. | Image courtesy of Carly Wilkins. Allison Lantero Allison Lantero Digital Content Specialist, Office of Public Affairs How can I participate? Follow along with

  9. April 30, 2008; HSS/Union Working Group Meeting to address training...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... direct marketing and public relations; and reports ... Department Safety and Health Committee American National Standards ... The union's official journal, The Electrical Worker, ...

  10. Join Energy.gov at the 2014 State of the Union | Department of Energy

    Office of Environmental Management (EM)

    Energy.gov at the 2014 State of the Union Join Energy.gov at the 2014 State of the Union January 28, 2014 - 11:23am Addthis Join Energy.gov tonight as we livetweet about all the major energy points in the President's State of the Union address. | Graphic by <a href="/node/379579">Sarah Gerrity</a>, Energy Department. Join Energy.gov tonight as we livetweet about all the major energy points in the President's State of the Union address. | Graphic by Sarah Gerrity, Energy

  11. External-field-free magnetic biosensor

    SciTech Connect (OSTI)

    Li, Yuanpeng; Wang, Yi; Klein, Todd; Wang, Jian-Ping, E-mail: jpwang@umn.edu [Department of Electrical and Computer Engineering, University of Minnesota, Minneapolis, Minnesota 55455 (United States)

    2014-03-24

    In this paper, we report a magnetic nanoparticle (MNP) detection scheme without the presence of any external magnetic field. The proposed magnetic sensor uses a patterned groove structure within the sensor so that no external magnetic field is needed to magnetize the MNPs. An example is given based on a giant magnetoresistance (GMR) sensing device with a spin valve structure. For this structure, the detection of MNPs located inside the groove and near the free layer is demonstrated under no external magnetic field. Micromagnetic simulations are performed to calculate the signal to noise level of this detection scheme. A maximum signal to noise ratio (SNR) of 18.6?dB from one iron oxide magnetic nanoparticle with 8?nm radius is achieved. As proof of concept, this external-field-free GMR sensor with groove structure of 200?nm??200?nm is fabricated using a photo and an electron beam integrated lithography process. Using this sensor, the feasibility demonstration of the detection SNR of 9.3?dB is achieved for 30??l magnetic nanoparticles suspension (30?nm iron oxide particles, 1?mg/ml). This proposed external-field-free sensor structure is not limited to GMR devices and could be applicable to other magnetic biosensing devices.

  12. Sandia Energy - Sandians Participate in 46th Annual American...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Participate in 46th Annual American Geophysical Union (AGU) Conference Home Infrastructure Security Carbon Capture & Storage Climate Energy Partnership News Global Climate & Energy...

  13. Energy Conservation Standards for Battery Chargers and External...

    Office of Environmental Management (EM)

    Battery Chargers and External Power Supplies; Proposed Rule Making - Ex Parte Communication Energy Conservation Standards for Battery Chargers and External Power Supplies; Proposed ...

  14. Mixed-mode diesel HCCI with External Mixture Formation: Preliminary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results 2003 DEER Conference...

  15. DOE Notice of Proposed Rulemaking to Amend the External Power...

    Broader source: Energy.gov (indexed) [DOE]

    the Notice of Proposed Rulemaking to Amend the External Power Supply Test Procedure. ... Issuance: Energy Conservation Program: Test Procedures for External Power Supplies, ...

  16. Characterization of a swept external cavity quantum cascade laser...

    Office of Scientific and Technical Information (OSTI)

    of a swept external cavity quantum cascade laser for rapid broadband spectroscopy and sensing Title: Characterization of a swept external cavity quantum cascade...

  17. Impact of External Heat-shielding Techniques on Shell Surface...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    External Heat-shielding Techniques on Shell Surface Temperatures and Dynamic Shell Thermal Deformation of Diesel Engine Emission Control Systems Impact of External Heat-shielding...

  18. Union Pacific Railroad`s LNG locomotive test program

    SciTech Connect (OSTI)

    Grimaila, B.

    1995-12-31

    Union Pacific Railroad is testing LNG in six locomotives through 1997 to determine if the liquefied natural gas technology is right for them. Two of the six LNG test locomotives are switch, or yard, locomotives. These 1,350 horsepower locomotives are the industry`s first locomotives totally fueled by natural gas. They`re being tested in the yard in the Los Angeles area. The other four locomotives are long-haul locomotives fueled by two tenders. These units are duel-fueled, operating on a mixture of LNG and diesel and are being tested primarily on the Los Angeles to North Platte, Nebraska corridor. All the information concerning locomotive emissions, locomotive performance, maintenance requirements, the overall LNG system design and the economic feasibility of the project will be analyzed to determine if UPR should expand, or abandon, the LNG technology.

  19. Crystal growth under external electric fields

    SciTech Connect (OSTI)

    Uda, Satoshi; Koizumi, Haruhiko; Nozawa, Jun; Fujiwara, Kozo

    2014-10-06

    This is a review article concerning the crystal growth under external electric fields that has been studied in our lab for the past 10 years. An external field is applied electrostatically either through an electrically insulating phase or a direct injection of an electric current to the solid-interface-liquid. The former changes the chemical potential of both solid and liquid and controls the phase relationship while the latter modifies the transport and partitioning of ionic solutes in the oxide melt during crystallization and changes the solute distribution in the crystal.

  20. Directions to External Dosimetry Office | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Directions to External Dosimetry Office PDF icon Route to Bldg 202 for dosimeters

  1. Benchmarking Outreach and Data Collection Techniques for External Portfolios

    Broader source: Energy.gov [DOE]

    This presentation contains information on Benchmarking Outreach and Data Collection Techniques for External Portfolios.

  2. External Links | U.S. DOE Office of Science (SC)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    External Links Budget Budget Home About Budget by Program GAO Audit Reports External Links Contact Information Budget U.S. Department of Energy SC-41/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-3541 F: (301) 903-9524 More Information » External Links Print Text Size: A A A FeedbackShare Page Office of Management and Budget (OMB) External link OMB Budget Documents External link CFO Budget Office U.S. Senate External link U.S. House of Representatives External

  3. CNS, labor union donate $15,000 to local March of Dimes | Y-12 National

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Security Complex CNS, labor union donate ... CNS, labor union donate $15,000 to local March of Dimes Posted: March 26, 2015 - 4:07pm At a recent kickoff luncheon, Y-12 Site Manager Bill Tindal (right) and Kimberly Mitchell of the Atomic Trades and Labor Council (left) gave a $15,000 check to Susie Racek, executive director of the local chapter of March of Dimes (center). The ATLC, an organization that represents 16 International Unions with more than 2,100 members, and Consolidated Nuclear

  4. Secretary Chu to Visit Houston to Highlight Obama's State of the Union

    Energy Savers [EERE]

    Address, Discuss "All of the Above" Energy Strategy | Department of Energy Visit Houston to Highlight Obama's State of the Union Address, Discuss "All of the Above" Energy Strategy Secretary Chu to Visit Houston to Highlight Obama's State of the Union Address, Discuss "All of the Above" Energy Strategy February 1, 2012 - 3:47pm Addthis Washington, D.C. - As part of the Energy Department's ongoing efforts to highlight President Obama's State of the Union address

  5. September 8, 2011, HSS/Union Focus Group Work Group Telecom - Meeting Overview and Action Summary

    Energy Savers [EERE]

    09-12-11 Draft DRAFT Meeting Overview and Action Summary HSS/Union Focus Group Work Group Telecom September 8, 2011 Meeting Overview: Glenn Podonsky reflected on the HSS Focus Group's 5 year history and reported that 24 HSS/Union Focus group meetings have been held to date. He emphasized the value of the relationships that have been developed between HSS and the unions and the need to re-energize efforts and rally to move the ball forward in addressing worker health and safety concerns through

  6. September 8, 2011, HSS/Union Focus Group Work Group Telecom - Work Group matrix

    Energy Savers [EERE]

    Rev 09-19-11) Work Group / HSS and Union Leads Union/Stakeholder/HSS Participants Improvement Issues/Goals Initial/Current Tasks Outputs 10CFR 851 -Implementation -Training HSS Leads: Pat Worthington / Bill McArthur Union Lead: Doug Stephens -USW Co-Lead: Barb McCabe - IUOE TBD - BCTD Dianne Whitten - HAMTC Stan Scott - HAMMER Gary Gustafson - LIUNA Steve Simonson - HSS Tom Staker - HSS Collectively work to ensure implementation of health and safety programs (851 Rule) within and among DOE site

  7. State of the Union Highlights Clean Energy Progress | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    State of the Union Highlights Clean Energy Progress State of the Union Highlights Clean Energy Progress February 5, 2014 - 12:00am Addthis President Obama focused on a variety of renewable energy and energy efficiency issues in his State of the Union address on January 28, highlighting progress toward a "shift to a cleaner energy economy" and spotlighting solar energy and fuel efficiency. "The shift to a cleaner energy economy won't happen overnight, and it will require tough

  8. Watch Energy Highlights from the State of the Union | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Watch Energy Highlights from the State of the Union Watch Energy Highlights from the State of the Union January 21, 2015 - 11:46am Addthis Matty Greene Matty Greene Former Videographer From low gas prices to growth in renewable energy sources like wind and solar, energy featured prominently in President Obama's sixth State of the Union address last night. From the way we produce energy to how we use it in our homes and businesses, the President laid out key ways that he plans to fight climate

  9. APRIL 30, 2008, HSS/UNION MEETING TO ADDRESS TRAINING INTEGRATED EXECUTIVE SUMMARY AND FINAL ACTION LIST

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    HSS/UNION MEETING TO ADDRESS TRAINING INTEGRATED EXECUTIVE SUMMARY AND FINAL ACTION LIST HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified issues by topical area. The following is a synthesis of actions/activities identified in the April 30 HSS/Union meeting to address training issues with focus in the areas of the development of DOE-wide HAMMER

  10. Fuxin Union Wind Power Co Ltd formerly known as Liaoning Zhangwu...

    Open Energy Info (EERE)

    Wind Power Co Ltd formerly known as Liaoning Zhangwu Xiehe Wind Power Co Ltd Jump to: navigation, search Name: Fuxin Union Wind Power Co Ltd (formerly known as Liaoning Zhangwu...

  11. President Bush Highlights Energy in the State of the Union Address |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Highlights Energy in the State of the Union Address President Bush Highlights Energy in the State of the Union Address February 3, 2005 - 10:01am Addthis "To keep our economy growing, we also need reliable supplies of affordable, environmentally responsible energy. Nearly four years ago, I submitted a comprehensive energy strategy that encourages conservation, alternative sources, a modernized electricity grid, and more production here at home -- including safe,

  12. April 30, 2008; HSS/Union Working Group Meeting to address training … Meeting Summary

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    * * training. * area discussed. Center (NTC) National Training Center. * * * Conduct of Meeting. A 1. 2. 3. 4. HAMMER. HSS/UNION MEETING TO ADDRESS TRAINING DRAFT MEETING SUMMARY Introductory Remarks. Glenn Podonsky made the following points: More than a dialogue, the intent of HSS is to participate in a productive manner, to develop working relationships with the unions, to work the issues, identify actions, and institutionalize a process for addressing and resolving issues to improve worker

  13. September 8, 2011, HSS/Union Focus Group Work Group Telecom - Work Group Guidance

    Energy Savers [EERE]

    -29-11 Draft Collaboration provides an opportunity to serve as an entity that is greater than the sum of its parts. HSS FOCUS GROUP DRAFT PROPOSED WORK GROUP GUIDANCE BACKGROUND: The HSS Focus Group provides a forum for communication and collaboration related to worker health, safety and security among HSS management and staff, labor unions, DOE Programs and stakeholders. Based on the foundation that labor union representatives are an essential source of frontline perspective in identifying,

  14. November 17, 2009 HSS/Union Lead Checkpoint Meeting on Integrated Collaborative Oversight - Accomplishments Overview

    Energy Savers [EERE]

    November 17, 2008 2009 Priority Activities Accomplishments/Path Forward Overview Training Assessments Accomplishments: * HSS (NTC)/NIEHS/Union Collaboration - Completed Safety Training Workshop for the Oak Ridge Office (ORO) and the Y-12 Site Office (YSO) in July, 2009 - Over 50 attendees participated including representatives from Federal, contractor and union organizations (local and international) - ORO/YSO Safety Training Workshop Report completed and provided to ORO/YSO management -

  15. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 - Agenda

    Office of Environmental Management (EM)

    6-24-08 Draft HSS/Union Working Group Meeting July 17, 2008 1:00 - 4:00 pm EST FORS 7E-069 Call-in: 301-903-9197 SUBJECT: SAFETY STANDARDS / 10 CFR 851 Core Union Working Groups Safety Standards: Metal Trades Department AFL-CIO - Lead International Brotherhood of Electrical Workers (IBEW) Operative Plasterers' & Cement Masons' International Association (OPCMIA) 10 CFR 851: United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International

  16. May 19, 2011, HSS/Union Focus Group Meeting - Summary and Participants

    Office of Environmental Management (EM)

    - Final Draft 07-11-11 HSS Focus Group May 19 Teleconference with Union Representatives Reconciliation of HSS/Union Work Groups MEETING DISCUSSION Glenn Podonsky, Chief Health, Safety and Security Officer - Opening Remarks: * DOE Administration's strategic goals are supported by continued focus on national prosperity and security through energy, environmental, nuclear and science and technology advancement solutions. * Melvin Williams is recently appointed in the new position of Associate Deputy

  17. The European Union's emissions trading system in perspective

    SciTech Connect (OSTI)

    A. Denny Ellerman; Paul L. Joskow

    2008-05-15

    The performance of the European Union's Emissions Trading System (EU ETS) to date cannot be evaluated without recognizing that the first three years from 2005 through 2007 constituted a 'trial' period and understanding what this trial period was supposed to accomplish. Its primary goal was to develop the infrastructure and to provide the experience that would enable the successful use of a cap-and-trade system to limit European GHG emissions during a second trading period, 2008-12, corresponding to the first commitment period of the Kyoto Protocol. The trial period was a rehearsal for the later more serious engagement and it was never intended to achieve significant reductions in CO{sub 2} emissions in only three years. In light of the speed with which the program was developed, the many sovereign countries involved, the need to develop the necessary data, information dissemination, compliance and market institutions, and the lack of extensive experience with emissions trading in Europe, we think that the system has performed surprisingly well. Although there have been plenty of rough edges, a transparent and widely accepted price for tradable CO{sub 2} emission allowances emerged by January 1, 2005, a functioning market for allowances has developed quickly and effortlessly without any prodding by the Commission or member state governments, the cap-and-trade infrastructure of market institutions, registries, monitoring, reporting and verification is in place, and a significant segment of European industry is incorporating the price of CO{sub 2} emissions into their daily production decisions. The development of the EU ETS and the experience with the trial period provides a number of useful lessons for the U.S. and other countries. 27 refs., 7 figs., 5 tabs.

  18. Past experiences with automotive external combustion engines

    SciTech Connect (OSTI)

    Amann, C.A.

    1999-07-01

    GMR (General Motors Research Laboratories, now GM R and D Center) has a history of improving the internal combustion engine, especially as it relates to automotive use. During the quarter century from 1950--75, considerable effort was devoted to evaluating alternative powerplants based on thermodynamic cycles different from those on which the established spark-ignition and diesel engines are founded. Two of these, the steam engine and the Stirling engine, incorporated external combustion. Research on those two alternatives is reviewed. Both were judged to fall short of current needs for commercial success as prime movers for conventional automotive vehicles.

  19. DOE - Office of Legacy Management -- Rocky Flats External Resources

    Office of Legacy Management (LM)

    External Resources Rocky Flats Site, Colorado External Resources Rocky Flats Stewardship Council Disclaimer Rocky Flats Cold War Museum Disclaimer U.S. Fish and Wildlife Service Rocky Flats National Wildlife Refuge Disclaimer Last Updated: 5/1/2013

  20. Historical Information on the Transportation External Coordination Working

    Energy Savers [EERE]

    Group (TEC) | Department of Energy Historical Information on the Transportation External Coordination Working Group (TEC) Historical Information on the Transportation External Coordination Working Group (TEC) Historical Information on the Transportation External Coordination Working Group (TEC) TEC was formed in 1992 to improve coordination between the U.S. Department of Energy (DOE) and external groups interested in the Department's transportation activities. TEC was co-chaired by DOE's

  1. Meeting on Battery Chargers and External Power Supplies | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy on Battery Chargers and External Power Supplies Meeting on Battery Chargers and External Power Supplies On Monday, June 11, 2012, representatives of several States and representatives of several non-profit energy efficiency organizations met with representatives of the Department of Energy to discuss the Notice of Proposed Rulemaking for Energy Conservation Standards for Battery Chargers and External Power Supplies, PDF icon Batteries_and_External_Power_Supplies.pdf More Documents

  2. External Independent Review (EIR) Standard Operating Procedure (SOP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    October 2008 | Department of Energy External Independent Review (EIR) Standard Operating Procedure (SOP) October 2008 External Independent Review (EIR) Standard Operating Procedure (SOP) October 2008 PDF icon External Independent Review (EIR) Standard Operating Procedure (SOP) October 2008 More Documents & Publications Contractor Statement of Work (SOW) Template (for EIR) Protocol_for_Environmental_Management_Cleanup_Projects_(clean).pdf External Independent Review (EIR) Standard

  3. SRNS Environmental Management System External Audit | Department of Energy

    Energy Savers [EERE]

    SRNS Environmental Management System External Audit SRNS Environmental Management System External Audit August 2009 Presenter: Eloy Saldivar, SRNS Track 7-1 Topics Covered: EMS Customer Satisfaction Contractor Profile/Integration Integration of EMS into ISM EMS External Audit EMS "Declaration of Conformance" EMS Configuration Control EMS Impact on SRS Processes, Products and Services PDF icon SRNS Environmental Management System External Audit More Documents & Publications ARRA

  4. DOE Benefits Forecasts: Report of the External Peer Review Panel |

    Office of Environmental Management (EM)

    Department of Energy Benefits Forecasts: Report of the External Peer Review Panel DOE Benefits Forecasts: Report of the External Peer Review Panel A report for the FY 2007 GPRA methodology review, highlighting the views of an external expert peer review panel on DOE benefits forecasts. PDF icon Report of the External Peer Review Panel More Documents & Publications Industrial Technologies Funding Profile by Subprogram Survey of Emissions Models for Distributed Combined Heat and Power

  5. Intergovernmental & External Affairs Contacts | Department of Energy

    Energy Savers [EERE]

    Contacts Intergovernmental & External Affairs Contacts Contacts Tara Trujillo Director, Intergovernmental Affairs More about Tara Trujillo Heidi VanGenderen Director, External Affairs More about Heidi VanGenderen Contact Us Intergovernmental and External Affairs 1000 Independence Ave., S.W. Washington, DC 20585 Phone: (202)586-3600 email envelope Energy.Outreach@hq.doe.gov

  6. External Independent Review (EIR) Standard Operating Procedure (SOP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    September 2010 | Department of Energy September 2010 External Independent Review (EIR) Standard Operating Procedure (SOP) September 2010 PDF icon EXTERNAL INDEPENDENT REVIEW (EIR) STANDARD OPERATING PROCEDURE (SOP) September 2010 More Documents & Publications External Independent Review (EIR) Standard Operating Procedure (SOP) Septemebr

  7. External Independent Review (EIR) Standard Operating Procedure (SOP)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Septemebr 2010 | Department of Energy Septemebr 2010 External Independent Review (EIR) Standard Operating Procedure (SOP) Septemebr 2010 PDF icon External Independent Review (EIR) Standard Operating Procedure (SOP) - September 2010 More Documents & Publications External Independent Review (EIR) Standard Operating Procedure (SOP) September

  8. Secondary emission electron gun using external primaries

    DOE Patents [OSTI]

    Srinivasan-Rao, Triveni (Shoreham, NY); Ben-Zvi, Ilan (Setauket, NY)

    2009-10-13

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  9. Secondary emission electron gun using external primaries

    DOE Patents [OSTI]

    Srinivasan-Rao, Triveni (Shoreham, NY); Ben-Zvi, Ilan (Setauket, NY); Kewisch, Jorg (Wading River, NY); Chang, Xiangyun (Middle Island, NY)

    2007-06-05

    An electron gun for generating an electron beam is provided, which includes a secondary emitter. The secondary emitter includes a non-contaminating negative-electron-affinity (NEA) material and emitting surface. The gun includes an accelerating region which accelerates the secondaries from the emitting surface. The secondaries are emitted in response to a primary beam generated external to the accelerating region. The accelerating region may include a superconducting radio frequency (RF) cavity, and the gun may be operated in a continuous wave (CW) mode. The secondary emitter includes hydrogenated diamond. A uniform electrically conductive layer is superposed on the emitter to replenish the extracted current, preventing charging of the emitter. An encapsulated secondary emission enhanced cathode device, useful in a superconducting RF cavity, includes a housing for maintaining vacuum, a cathode, e.g., a photocathode, and the non-contaminating NEA secondary emitter with the uniform electrically conductive layer superposed thereon.

  10. Case histories of external microbiologically influenced corrosion

    SciTech Connect (OSTI)

    Pikas, J.L.

    1997-05-01

    External microbiologically influenced corrosion (MIC) is a serious dilemma in the pipeline industry. Even today, it has not been recognized as such because it has been primarily mistaken for galvanic corrosion. Due to the type of coating materials used in the past, the cleaning process or lack of it, and application methods used, all coating systems have the propensity to develop defects and pinholes where disbondment and this type of microbial corrosion could occur. In addition, the pipeline may or may not have had cathodic protection initially and/or consistently applied. Given these factors and the interaction of bacteria from the soil, moisture availability, degree of cathodic protection, and temperature of the pipeline, this paper will discuss the role that microbes play in the disbondment process, thus resulting in corrosion of an underground pipeline. Several case histories, laboratory testing results, and field findings will be presented.

  11. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 … Meeting Summary

    Office of Environmental Management (EM)

    10 CFR 851 and DOE Safety Standards Implementation July 17, 2008 Integrated Executive Summary and Final Action List HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified health and safety issues by topical area. The following is an overview of actions/activities identified in the July 17 HSS/Union meeting to address 851 Rule and DOE Safety Standards

  12. External combustor for gas turbine engine

    DOE Patents [OSTI]

    Santanam, Chandran B. (Indianapolis, IN); Thomas, William H. (Indianapolis, IN); DeJulio, Emil R. (Columbus, IN)

    1991-01-01

    An external combustor for a gas turbine engine has a cyclonic combustion chamber into which combustible gas with entrained solids is introduced through an inlet port in a primary spiral swirl. A metal draft sleeve for conducting a hot gas discharge stream from the cyclonic combustion chamber is mounted on a circular end wall of the latter adjacent the combustible gas inlet. The draft sleeve is mounted concentrically in a cylindrical passage and cooperates with the passage in defining an annulus around the draft sleeve which is open to the cyclonic combustion chamber and which is connected to a source of secondary air. Secondary air issues from the annulus into the cyclonic combustion chamber at a velocity of three to five times the velocity of the combustible gas at the inlet port. The secondary air defines a hollow cylindrical extension of the draft sleeve and persists in the cyclonic combustion chamber a distance of about three to five times the diameter of the draft sleeve. The hollow cylindrical extension shields the drive sleeve from the inlet port to prevent discharge of combustible gas through the draft sleeve.

  13. Join @Energy for the 2015 State of the Union Address | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    us for live coverage of the State of the Union, starting at 9PM ET. | Image courtesy of Sarah Gerrity. Join us for live coverage of the State of the Union, starting at 9PM ET. | Image courtesy of Sarah Gerrity. Pat Adams Pat Adams Digital Content Specialist, Office of Public Affairs How can I participate? Follow along with @Energy on Twitter Starting at 9 p.m. ET tonight. Ask questions and share your thoughts by tweeting at @Energy using #SOTU. Tune in tomorrow at 1 p.m. ET for Big Block of

  14. Innovation and Energy at the State Of The Union | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    President Obama will deliver the State of the Union to Congress & to the American people tonight at 9pm ET. | Official White House Photo by Chuck Kennedy. President Obama will deliver the State of the Union to Congress & to the American people tonight at 9pm ET. | Official White House Photo by Chuck Kennedy. April Saylor April Saylor Former Digital Outreach Strategist, Office of Public Affairs How can I participate? President Obama will address the nation Tuesday, Feb. 12 at 9pm EST Tune

  15. July 17, 2008; HSS/Union Working Group Meeting, Safety Standards, 10 CFR 851 - Information Package

    Office of Environmental Management (EM)

    10 CFR 851 / Safety Standards July 17, 2008 July 17, 2008 ds 06-24-08 Draft HSS/Union Working Group Meeting July 17, 2008 1:00 - 4:00 pm EST FORS 7E-069 Call-in: 301-903-9197 SUBJECT: SAFETY STANDARDS / 10 CFR 851 Core Union Working Groups Safety Standards: Metal Trades Department AFL-CIO - Lead International Brotherhood of Electrical Workers (IBEW) Operative Plasterers' & Cement Masons' International Association (OPCMIA) 10 CFR 851: United Steel, Paper and Forestry, Rubber, Manufacturing,

  16. DOE - Office of Legacy Management -- Union Mines Development Corp - NY 0-22

    Office of Legacy Management (LM)

    Mines Development Corp - NY 0-22 FUSRAP Considered Sites Site: UNION MINES DEVELOPMENT CORP. (NY.0-22) Eliminated from consideration under FUSRAP Designated Name: Not Designated Alternate Name: Union Carbide NY.0-22-1 Location: New York , New York NY.0-22-1 Evaluation Year: 1987 NY.0-22-1 Site Operations: The company owned uranium mines or reserves located in the western U.S. NY.0-22-1 Site Disposition: Eliminated - No reason to believe radioactive material was used at this site NY.0-22-1

  17. Integrated External Aerodynamic and Underhood Thermal Analysis for Heavy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicles | Department of Energy External Aerodynamic and Underhood Thermal Analysis for Heavy Vehicles Integrated External Aerodynamic and Underhood Thermal Analysis for Heavy Vehicles 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting PDF icon vss080_sofu_2012_o.pdf More Documents & Publications Cooling Boiling in Head Region - PACCAR Integrated Underhood Thermal and External Aerodynamics- Cummins Cummins SuperTruck

  18. Using Waste Heat for External Processes | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Waste Heat for External Processes Using Waste Heat for External Processes This tip sheet describes the potential savings resulting from using waste heat from high-temperature process heating for lower temperature processes, like oven-drying. PROCESS HEATING TIP SHEET #10 PDF icon Using Waste Heat for External Processes (January 2006) More Documents & Publications Reduce Air Infiltration in Furnaces Waste Heat Reduction and Recovery for Improving Furnace Efficiency, Productivity and Emissions

  19. Diesel HCCI with External Mixture Preparation | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    with External Mixture Preparation Diesel HCCI with External Mixture Preparation 2004 Diesel Engine Emissions Reduction (DEER) Conference Presentation: The Ohio State University PDF icon 2004_deer_midlam_mohler.pdf More Documents & Publications A Mixed Mode HCCI/DI Engine Based on a Novel Heavy Fuel Atomizer Control-Oriented Modeling for HCCI Combustion and Multi-Cylinder HCCI Experimental Activities Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results

  20. Federal and External STEM Education Resources | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and External STEM Education Resources Federal and External STEM Education Resources Federal and External STEM Education Resources STEM Volunteer Training Resources The Minorities in Energy Initiative launched a quarterly STEM Volunteer virtual training series on August 13, 2015. The trainings are intended to provide tips, resources and strategies for STEM professionals that want to volunteer. Role Models Matter Online Toolkit can be used to help you continue to prepare for your first role

  1. EM Announces New Director of Office of External Affairs

    Broader source: Energy.gov [DOE]

    WASHINGTON, D.C. EM has announced that Paul Seidler has joined EM as the Director of the Office of External Affairs.

  2. An Assessment Of The External Radiological Impact In Areas Of...

    Open Energy Info (EERE)

    Assessment Of The External Radiological Impact In Areas Of Greece With Elevated Natural Radioactivity Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal...

  3. JOBAID-COMPLETING AN EXTERNAL TRAINING REQUEST (SF-182)

    Broader source: Energy.gov [DOE]

    The purpsoe of this job aid is to guide users through the step-by-step process of completing an external training request form (SF-182).

  4. NA EA - Associate Administrator for External Affairs | National...

    National Nuclear Security Administration (NNSA)

    Us Our Operations Management and Budget Office of Civil Rights Workforce Statistics NA EA - Associate Administrator for External Affairs NA EA - Associate...

  5. September 8, 2011, HSS/Union Focus Group Work Group Telecom - Agenda

    Energy Savers [EERE]

    Focus Group HSS/Union Work Group Telecom September 8, 2011 Call-In: 301-903-0620 PROPOSED AGENDA Work Group Framework 3:00 - 4:00 pm EST Introductory Remarks...................................................Glenn Podonsky Meeting Purpose/Process..........................................Mari-Jo Campagnone Group Discussion Facilitation...............................................Pete Stafford Discussion...................................................................................All (1)

  6. September 16, 2008; HSS/Union Working Group Meeting, Former Worker and Energy Compensation Programs, CAIRS Reporting, Central Worker Data Tracking … Meeting Summary

    Energy Savers [EERE]

    7 10-10-08 Draft HSS/Union Meeting To Address Former Worker and Energy Employee Occupational Illness Compensation Programs, CAIRS Reporting, and Central Worker Data Tracking September 16, 2008 Integrated Executive Summary and Final Action List Background: HSS and the labor unions who participated in the initial 2007 HSS Focus Group meetings agreed to a path forward in which various unions combined to form core working groups to address union identified health and safety issues by topical area.

  7. China's Coal: Demand, Constraints, and Externalities

    SciTech Connect (OSTI)

    Aden, Nathaniel; Fridley, David; Zheng, Nina

    2009-07-01

    This study analyzes China's coal industry by focusing on four related areas. First, data are reviewed to identify the major drivers of historical and future coal demand. Second, resource constraints and transport bottlenecks are analyzed to evaluate demand and growth scenarios. The third area assesses the physical requirements of substituting coal demand growth with other primary energy forms. Finally, the study examines the carbon- and environmental implications of China's past and future coal consumption. There are three sections that address these areas by identifying particular characteristics of China's coal industry, quantifying factors driving demand, and analyzing supply scenarios: (1) reviews the range of Chinese and international estimates of remaining coal reserves and resources as well as key characteristics of China's coal industry including historical production, resource requirements, and prices; (2) quantifies the largest drivers of coal usage to produce a bottom-up reference projection of 2025 coal demand; and (3) analyzes coal supply constraints, substitution options, and environmental externalities. Finally, the last section presents conclusions on the role of coal in China's ongoing energy and economic development. China has been, is, and will continue to be a coal-powered economy. In 2007 Chinese coal production contained more energy than total Middle Eastern oil production. The rapid growth of coal demand after 2001 created supply strains and bottlenecks that raise questions about sustainability. Urbanization, heavy industrial growth, and increasing per-capita income are the primary interrelated drivers of rising coal usage. In 2007, the power sector, iron and steel, and cement production accounted for 66% of coal consumption. Power generation is becoming more efficient, but even extensive roll-out of the highest efficiency units would save only 14% of projected 2025 coal demand for the power sector. A new wedge of future coal consumption is likely to come from the burgeoning coal-liquefaction and chemicals industries. If coal to chemicals capacity reaches 70 million tonnes and coal-to-liquids capacity reaches 60 million tonnes, coal feedstock requirements would add an additional 450 million tonnes by 2025. Even with more efficient growth among these drivers, China's annual coal demand is expected to reach 3.9 to 4.3 billion tonnes by 2025. Central government support for nuclear and renewable energy has not reversed China's growing dependence on coal for primary energy. Substitution is a matter of scale: offsetting one year of recent coal demand growth of 200 million tonnes would require 107 billion cubic meters of natural gas (compared to 2007 growth of 13 BCM), 48 GW of nuclear (compared to 2007 growth of 2 GW), or 86 GW of hydropower capacity (compared to 2007 growth of 16 GW). Ongoing dependence on coal reduces China's ability to mitigate carbon dioxide emissions growth. If coal demand remains on a high growth path, carbon dioxide emissions from coal combustion alone would exceed total US energy-related carbon emissions by 2010. Within China's coal-dominated energy system, domestic transportation has emerged as the largest bottleneck for coal industry growth and is likely to remain a constraint to further expansion. China has a low proportion of high-quality reserves, but is producing its best coal first. Declining quality will further strain production and transport capacity. Furthermore, transporting coal to users has overloaded the train system and dramatically increased truck use, raising transportation oil demand. Growing international imports have helped to offset domestic transport bottlenecks. In the long term, import demand is likely to exceed 200 million tonnes by 2025, significantly impacting regional markets.

  8. Estimating Externalities of Natural Gas Fuel Cycles, Report 4

    SciTech Connect (OSTI)

    Barnthouse, L.W.; Cada, G.F.; Cheng, M.-D.; Easterly, C.E.; Kroodsma, R.L.; Lee, R.; Shriner, D.S.; Tolbert, V.R.; Turner, R.S.

    1998-01-01

    This report describes methods for estimating the external costs (and possibly benefits) to human health and the environment that result from natural gas fuel cycles. Although the concept of externalities is far from simple or precise, it generally refers to effects on individuals' well being, that result from a production or market activity in which the individuals do not participate, or are not fully compensated. In the past two years, the methodological approach that this report describes has quickly become a worldwide standard for estimating externalities of fuel cycles. The approach is generally applicable to any fuel cycle in which a resource, such as coal, hydro, or biomass, is used to generate electric power. This particular report focuses on the production activities, pollution, and impacts when natural gas is used to generate electric power. In the 1990s, natural gas technologies have become, in many countries, the least expensive to build and operate. The scope of this report is on how to estimate the value of externalities--where value is defined as individuals' willingness to pay for beneficial effects, or to avoid undesirable ones. This report is about the methodologies to estimate these externalities, not about how to internalize them through regulations or other public policies. Notwithstanding this limit in scope, consideration of externalities can not be done without considering regulatory, insurance, and other considerations because these institutional factors affect whether costs (and benefits) are in fact external, or whether they are already somehow internalized within the electric power market. Although this report considers such factors to some extent, much analysis yet remains to assess the extent to which estimated costs are indeed external. This report is one of a series of reports on estimating the externalities of fuel cycles. The other reports are on the coal, oil, biomass, hydro, and nuclear fuel cycles, and on general methodology.

  9. Waste Treatment Plant External Independent Review, Office of River

    Energy Savers [EERE]

    Protection, Richland | Department of Energy Waste Treatment Plant External Independent Review, Office of River Protection, Richland Waste Treatment Plant External Independent Review, Office of River Protection, Richland March 28, 2016 8:00AM EDT to April 1, 2016 5:00PM EDT External Independent Review (EIR). On March 28 - April 1, the Office of Project Management Oversight and Assessments (PM) will lead the site visit for the first phase of the WTP Baseline Change Proposal (BCP)-02 EIR at the

  10. Electricity generation and environmental externalities: Case studies, September 1995

    SciTech Connect (OSTI)

    1995-09-28

    Electricity constitutes a critical input in sustaining the Nation`s economic growth and development and the well-being of its inhabitants. However, there are byproducts of electricity production that have an undesirable effect on the environment. Most of these are emissions introduced by the combustion of fossil fuels, which accounts for nearly 70 percent of the total electricity generated in the United States. The environmental impacts (or damages) caused by these emissions are labeled environmental ``externalities.`` Included in the generic term ``externality`` are benefits or costs resulting as an unintended byproduct of an economic activity that accrue to someone other than the parties involved in the activity. This report provides an overview of the economic foundation of externalities, the Federal and State regulatory approaches, and case studies of the impacts of the externality policies adopted by three States.

  11. Estimating Externalities of Coal Fuel Cycles, Report 3

    SciTech Connect (OSTI)

    Barnthouse, L.W.; Cada, G.F.; Cheng, M.-D.; Easterly, C.E.; Kroodsma, R.L.; Lee, R.; Shriner, D.S.; Tolbert, V.R.; Turner, R.S.

    1994-09-01

    The agreement between the US DOE and the EC established the specific objectives of the study: (a) to develop a methodological framework that uses existing data and models to quantify the external costs and benefits of energy; (b) to demonstrate the application of the framework to estimate the externalities of the coal, biomass, oil, natural gas, hydro, nuclear, photovoltaic, and wind fuel cycles (by agreement with the EC, the US addressed the first six of these); and (c) to identify major gaps in the availability of information to quantify impacts, damages, benefits, and externalities of fuel cycles; and to suggest priorities for future research. The main consideration in defining these objectives was a desire to have more information about externalities, and a better method for estimating them.

  12. Widget:ExternalLinkButton | Open Energy Information

    Open Energy Info (EERE)

    with spaces (i.e.- btn-primary) style - add style elements, cannot change button color with this (optional) Examples Default Button Visit FWA Widget:ExternalLinkButton |...

  13. Short-Term Energy Tests of a Credit Union Building in Idaho (Draft)

    SciTech Connect (OSTI)

    Subbarao, K.; Balcomb, J. D.

    1993-01-01

    This report describes tests and results of the energy performance of a credit union building in Idaho. The building is in the Energy Edge Program administered by the Bonneville Power Administration (BPA). BPA provided incentives to incorporate innovative features designed to conserve energy use by the building. It is of interest to determine the actual performance of these features. The objective of this project was to evaluate the applicability of the SERI short-term energy monitoring (STEM) method to nonresidential buildings.

  14. #SOTU Roundup: Energy Highlights from the 2014 State of the Union |

    Broader source: Energy.gov (indexed) [DOE]

    Department of Energy On January 28, 2014, President Obama delivered his fifth State of the Union address at the U.S. Capitol Building. Above, check out the energy and climate change highlights from the speech. | Video compilation by Matty Greene, Energy Department. Marissa Newhall Marissa Newhall Director of Digital Strategy & Communications #SOTU 2014 Learn how the Energy Department is fighting climate change and growing the clean energy economy. Energy topics featured prominently in

  15. SF6432-NI Fixed Price Contracts with the Newly Independent States of the Former Soviet Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Department Release Date: 11/17/15 Page 1 of 15 Printed copies of this document are uncontrolled. Retrieve latest version electronically. SANDIA CORPORATION SF 6432-NI (11/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS WITH THE NEWLY INDEPENDENT STATES OF THE FORMER SOVIET UNION THE FOLLOWING CLAUSES APPLY TO REQUESTS FOR QUOTATION AND CONTRACTS AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN

  16. SF6432-NI Fixed Price Contracts with the Newly Independent States of the Former Soviet Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NI (04/2015) SECTION II STANDARD TERMS AND CONDITIONS FOR FIXED PRICE CONTRACTS WITH THE NEWLY INDEPENDENT STATES OF THE FORMER SOVIET UNION THE FOLLOWING CLAUSES APPLY TO REQUESTS FOR QUOTATION AND CONTRACTS AS INDICATED UNLESS SPECIFICALLY DELETED, OR EXCEPT TO THE EXTENT THEY ARE SPECIFICALLY SUPPLEMENTED OR AMENDED IN WRITING IN THE SIGNATURE PAGE OR SECTION I. (CTRL+CLICK ON A LINK BELOW TO ADVANCE DIRECTLY TO THAT SECTION) ACCEPTANCE OF TERMS AND CONDITIONS APPLICABLE LAW ASSIGNMENT

  17. I' I OAK RIDGE NATIONAL LABORATORY OPERATED B Y UNION CARBIDE CORPORATION

    Office of Legacy Management (LM)

    / I' I OAK RIDGE NATIONAL LABORATORY OPERATED B Y UNION CARBIDE CORPORATION NUCLEAR DIVISION POST OFFICE BOK X OAK RIDGE, TENNESSEE 37830 August 21, 1979 Department of Energy, Oak Ridge Operations Attention: E. L. Keller, Director for Technical Services Division Post Office Box E Oak Ridge, Tennessee 37830 Gentlemen: Formerly Utilized Site-Remedial Action Program - Post Decontamination Radiological Survey of a portion of the Former Kellex Laboratory Site, Jersey City, New Jersey Decontamination

  18. November 17, 2009 HSS/Union Lead Checkpoint Meeting - Integrated Collaborative Oversight Concept

    Energy Savers [EERE]

    Collaborative Oversight (ICO) Concept Evolution - Emerged from Insights HSS Gained through: * Laboratory Sustainability Pilot Studies * Visiting Speaker Program * Union Focus Group Meetings ICO Concept Overview * Goals - Transition DOE into a better balance between oversight and reliable mission execution as a first step toward 21 st century governance - Maintain the health, safety, and security of DOE site workers and facilities - Create a highly competent process through inclusion *

  19. November 17, 2009 HSS/Union Lead Checkpoint Meeting on Integrated Collaborative Oversight - Agenda

    Energy Savers [EERE]

    10:30 - 11:30 pm EST FORS 7E-069 Union Leads: Ron Ault.................. ............... AFL-CIO Metal Trades Department Pete Stafford................................Building and Construction Trades Department Center for Construction Research & Training (BCTD CPWR) Chico McGill/Dennis Phelps...........International Brotherhood of Electrical Workers [IBEW] Tommy Fuller............................Sheet Metal Workers International Association [SMWIA] James Frederick/Doug Stephens........United

  20. DOE - Office of Legacy Management -- Union Carbide and Carbon Co - TN 10

    Office of Legacy Management (LM)

    Carbide and Carbon Co - TN 10 FUSRAP Considered Sites Site: Union Carbide and Carbon Co (TN.10) Designated Name: Alternate Name: Location: Evaluation Year: Site Operations: Site Disposition: Radioactive Materials Handled: Primary Radioactive Materials Handled: Radiological Survey(s): Site Status: This site is one of a group of 5 FUSRAP considered sites for which records are available that provide a reasonably complete historical account of their operations and relationship, if any, with MED/AEC

  1. OAK RIDGE NATIONAL LABORATORY OPER*TEO BY UNION CARBIDE CORPORATION

    Office of Legacy Management (LM)

    ~$ ., . .Y.' ~. : ' : ,,, OAK RIDGE NATIONAL LABORATORY OPER*TEO BY UNION CARBIDE CORPORATION NUCLEAR DIVISION ' . ' : .m POST OFFICE BOX X OAK RIDGE, TENNESSEE ,X,0 ,. June 20, 1980 .~ ,, M r. Arthur J. 'Whitman Environmental and Safety 'Engineering Division U.S. Department of Energy ,) Washington, Oit. 20545 ., Dear Art: Soil Sample Analysis, City of Woburn Landfill, Woburn, Massachusetts ,,During a.radiological survey of the old.and new city of Woburn landfills (i-e: trip report.to Woburn,

  2. May 19, 2011, HSS/Union Focus Group Meeting - Draft Work Group Matrix

    Office of Environmental Management (EM)

    06-22-11) WORK GROUPS HSS/ Union/ Stakeholder Leads Work Group Participants Improvement Issues/Goals Initial/Current Tasks Outputs 10 CFR 851 Pat Worthington CPWR USW Collectively work to ensure implementation of health and safety programs (851 Rule) within and among DOE site contractors to eliminate/minimize inconsistent requirements among M&I, M&O, LLC and SBA contractors/subcontractors. - Identify leads and participants - Develop charter - Goals/ Intended Output - Develop Task

  3. Analysis of LM Stakeholder Interaction and External Communications |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Analysis of LM Stakeholder Interaction and External Communications Analysis of LM Stakeholder Interaction and External Communications The U.S. Department of Energy (DOE) Office of Legacy Management (LM) makes every effort to communicate with its stakeholders through public and small group meetings, conferences, briefings, news releases, telephone, email, informational materials, and the LM website. To assess the effectiveness of LM's communication with stakeholders

  4. GE Global Research Sourcing External Document & Process Repository | GE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Global Research GE Global Research Sourcing External Document & Process Repository Home > GE Global Research Sourcing External Document & Process Repository Supplier Integrity Guide Purchase Order Related Documents: GE Global Research Special Terms of the Contract (security requirements for on-site contractors) New York State Direct Pay Tax Permit This is a tax form that informs suppliers GE Global Research will self-assess and remit sales taxes to New York State. Michigan State

  5. External Technical Review Report for Small Column Ion Exchange Technology

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    at Savannah River Site | Department of Energy Report for Small Column Ion Exchange Technology at Savannah River Site External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site Full Document and Summary Versions are available for download PDF icon External Technical Review Report for Small Column Ion Exchange Technology at Savannah River Site PDF icon Summary - Small Column Ion Exchange (SCIX)Technology at the SRS More Documents & Publications

  6. External Technical Review for Evaluation of System Level Modeling and

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Simulation Tools in Support of Hanford Site Liquid Waste Process | Department of Energy for Evaluation of System Level Modeling and Simulation Tools in Support of Hanford Site Liquid Waste Process External Technical Review for Evaluation of System Level Modeling and Simulation Tools in Support of Hanford Site Liquid Waste Process Full Document and Summary Versions are available for download PDF icon External Technical Review for Evaluation of System Level Modeling and Simulation Tools in

  7. Treatment of External Levels in Neutron Resonance Fitting: Application to

    Office of Scientific and Technical Information (OSTI)

    the Nonfissile Nuclide {sup 52}Cr (Journal Article) | SciTech Connect Treatment of External Levels in Neutron Resonance Fitting: Application to the Nonfissile Nuclide {sup 52}Cr Citation Details In-Document Search Title: Treatment of External Levels in Neutron Resonance Fitting: Application to the Nonfissile Nuclide {sup 52}Cr Measured neutron resonance cross sections are usually analyzed and parametrized by fitting theoretical curves to high-resolution point data. Theoretically, the cross

  8. Analysis of LM Stakeholder Interaction and External Communications |

    Energy Savers [EERE]

    Department of Energy Analysis of LM Stakeholder Interaction and External Communications Analysis of LM Stakeholder Interaction and External Communications October 14, 2014 - 11:08am Addthis What does this project do? Goal 2 - Preserve, protect, and share records and information. The U.S. Department of Energy (DOE) Office of Legacy Management (LM) makes every effort to communicate with its stakeholders through public and small group meetings, conferences, briefings, news releases, telephone,

  9. Analysis of LM Stakeholder Interaction and External Communications |

    Energy Savers [EERE]

    Department of Energy Analysis of LM Stakeholder Interaction and External Communications Analysis of LM Stakeholder Interaction and External Communications The U.S. Department of Energy (DOE) Office of Legacy Management (LM) makes every effort to communicate with its stakeholders through public and small group meetings, conferences, briefings, news releases, telephone, email, informational materials, and the LM website. To assess the effectiveness of LM's communication with stakeholders

  10. The hydrogen atom in plasmas with an external electric field

    SciTech Connect (OSTI)

    Bahar, M. K.; Soylu, A.

    2014-09-15

    We numerically solve the Schrdinger equation, using a more general exponential cosine screened Coulomb (MGECSC) potential with an electric field, in order to investigate the screening and weak external electric field effects on the hydrogen atom in plasmas. The MGECSC potential is examined for four different cases, corresponding to different screening parameters of the potential and the external electric field. The influences of the different screening parameters and the weak external electric field on the energy eigenvalues are determined by solving the corresponding equations using the asymptotic iteration method (AIM). It is found that the corresponding energy values shift when a weak external electric field is applied to the hydrogen atom in a plasma. This study shows that a more general exponential cosine screened Coulomb potential allows the influence of an applied, weak, external electric field on the hydrogen atom to be investigated in detail, for both Debye and quantum plasmas simultaneously. This suggests that such a potential would be useful in modeling similar effects in other applications of plasma physics, and that AIM is an appropriate method for solving the Schrdinger equation, the solution of which becomes more complex due to the use of the MGECSC potential with an applied external electric field.

  11. Marriage or Civil Unions for Single Cells and Metagenomics (Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)

    ScienceCinema (OSTI)

    Rusch, Doug [J. Craig Venter Institute

    2013-01-22

    JCVI's Doug Rusch on "Marriage or Civil Unions for Single Cells and Metagenomes" at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

  12. In Charlotte, Senior DOE Official to Amplify State of the Union, Call to Give Drivers More Options at the Pump

    Broader source: Energy.gov [DOE]

    Assistant Secretary for Energy Efficiency and Renewable Energy Dr. David Danielson will join officials from NASCAR and Sprint Corp. in Charlotte, N.C., to highlight the President’s State of the Union address

  13. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 3, 2010 [Events, Facility News] Call for Abstracts for the 2010 AGU Fall Meeting Bookmark and Share The American Geophysical Union (AGU) Fall Meeting will be held in San Francisco, California, December 13-17, 2010. Over 16,000 geophysicists from around the world are expected to attend. This year's meeting will present topics in all areas of Earth and space sciences. The deadline for abstract submissions is September 02, 2010. For more information regarding submission guidelines or the AGU

  14. Externalities and electric power: an integrated assessment approach

    SciTech Connect (OSTI)

    Lee, R.

    1995-12-31

    This paper describes an integrated assessment approach for considering the options that electric utilities have to meet the anticipated demand for their power. The objective that this paper considers is one of meeting the demand for power, with an acceptable degree of reliability, at minimum cost. The total cost is the sum of the private cost of producing the electric power plus the external costs that result from its production. These external costs, or externalities, are effects on the well-being of third parties that producers and consumers of electric power do not take into account in their decisions. The external costs include many different types of effects such as illness, ecosystem damage, and road damage. The solution to the problem of minimizing total cost is addressed in two steps. The first step uses damage function methods to establish a common metric for the weights of the different objectives (i.e., external costs). The damage function analysis also reduces the dimensionality of the analysis in the second step, and identifies criteria to include in that analysis. The second step uses multi-criteria decision methods. This analysis includes the most important externalities that the damage function analysis identifies and, in addition, potentially important factors that can not be quantified reliably using damage function methods. An example of the latter are the damages from global climate change. The two-step method that this paper describes addresses many of the limitations of the damage function method and multi-criteria methods, that arise when they are used separately. This linked method can be used by electric utilities for their integrated resource planning. It can also be adapted to other applications.

  15. President Obama Talks Energy at the State of the Union 2013 | Department of

    Broader source: Energy.gov (indexed) [DOE]

    Energy Obama speaks about energy independence, climate change, and investing in renewable energy and technology during the State of the Union on February 12, 2013. Amanda Scott Amanda Scott Former Managing Editor, Energy.gov How can I participate? Got questions about the energy section of last night's speech? Head to WhiteHouse.gov to dig in to speech line-by-line and respond. You can also ask question today at 4pm ET. Visit WhiteHouse.gov/live to chat with Heather Zichal, the Deputy

  16. External Independent Review (EIR) Scoping Meeting Agreement Form

    Broader source: Energy.gov [DOE]

    Under DOE O 413.3B, Program and Project Management for the Acquisition of Capital Assets, the Office of Acquisition and Project Management (OAPM) must perform a Performance Baseline External Independent Review (EIR) prior to Critical Decision (CD) 2, and a Construction/Execution Readiness EIR for all Major System projects prior to CD-3.

  17. NA EA - Associate Administrator for External Affairs | National Nuclear

    National Nuclear Security Administration (NNSA)

    Security Administration EA - Associate Administrator for External Affairs | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Countering Nuclear Terrorism About Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Library Bios Congressional Testimony Fact Sheets Newsletters Press Releases

  18. EXTERNAL INDEPENDENT REVIEW (EIR) STANDARD OPERATING PROCEDURES (SOP)

    Office of Environmental Management (EM)

    EXTERNAL INDEPENDENT REVIEW (EIR) STANDARD OPERATING PROCEDURES (SOP) Revision 2 U.S. DEPARTMENT OF ENERGY (DOE) OFFICE OF PROJECT MANAGEMENT OVERSIGHT AND ASSESSMENTS (PMOA) October 2015 2 TABLE OF CONTENTS 1.0 PURPOSE AND AUTHORITY .................................................................................3 2.0 EIR BUDGETING .....................................................................................................4 3.0 EIR TEAM COMPOSITION

  19. Estimating Fuel Cycle Externalities: Analytical Methods and Issues, Report 2

    SciTech Connect (OSTI)

    Barnthouse, L.W.; Cada, G.F.; Cheng, M.-D.; Easterly, C.E.; Kroodsma, R.L.; Lee, R.; Shriner, D.S.; Tolbert, V.R.; Turner, R.S.

    1994-07-01

    The activities that produce electric power typically range from extracting and transporting a fuel, to its conversion into electric power, and finally to the disposition of residual by-products. This chain of activities is called a fuel cycle. A fuel cycle has emissions and other effects that result in unintended consequences. When these consequences affect third parties (i.e., those other than the producers and consumers of the fuel-cycle activity) in a way that is not reflected in the price of electricity, they are termed ''hidden'' social costs or externalities. They are the economic value of environmental, health and any other impacts, that the price of electricity does not reflect. How do you estimate the externalities of fuel cycles? Our previous report describes a methodological framework for doing so--called the damage function approach. This approach consists of five steps: (1) characterize the most important fuel cycle activities and their discharges, where importance is based on the expected magnitude of their externalities, (2) estimate the changes in pollutant concentrations or other effects of those activities, by modeling the dispersion and transformation of each pollutant, (3) calculate the impacts on ecosystems, human health, and any other resources of value (such as man-made structures), (4) translate the estimates of impacts into economic terms to estimate damages and benefits, and (5) assess the extent to which these damages and benefits are externalities, not reflected in the price of electricity. Each step requires a different set of equations, models and analysis. Analysts generally believe this to be the best approach for estimating externalities, but it has hardly been used! The reason is that it requires considerable analysis and calculation, and to this point in time, the necessary equations and models have not been assembled. Equally important, the process of identifying and estimating externalities leads to a number of complex issues that also have not been fully addressed. This document contains two types of papers that seek to fill part of this void. Some of the papers describe analytical methods that can be applied to one of the five steps of the damage function approach. The other papers discuss some of the complex issues that arise in trying to estimate externalities. This report, the second in a series of eight reports, is part of a joint study by the U.S. Department of Energy (DOE) and the Commission of the European Communities (EC)* on the externalities of fuel cycles. Most of the papers in this report were originally written as working papers during the initial phases of this study. The papers provide descriptions of the (non-radiological) atmospheric dispersion modeling that the study uses; reviews much of the relevant literature on ecological and health effects, and on the economic valuation of those impacts; contains several papers on some of the more complex and contentious issues in estimating externalities; and describes a method for depicting the quality of scientific information that a study uses. The analytical methods and issues that this report discusses generally pertain to more than one of the fuel cycles, though not necessarily to all of them. The report is divided into six parts, each one focusing on a different subject area.

  20. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    July 22, 2014 [Events] Call for Abstracts for AGU Fall Meeting and AMS Annual Meeting Bookmark and Share Abstract submission deadlines are 6 August for the Fall Meeting of the American Geophysical Union (AGU) and 15 August for the Annual Meeting of the American Meteorological Society (AMS). AGU Sessions The 2014 AGU Fall Meeting will be held 15-19 December in San Francisco, California. Over 24,000 geophysicists from around the world are expected to attend and present more than 15,000 posters and

  1. EFRC External Websites | U.S. DOE Office of Science (SC)

    Office of Science (SC) Website

    Centers » EFRC External Websites Energy Frontier Research Centers (EFRCs) EFRCs Home Centers EFRC External Websites Research Science Highlights News & Events Publications History Contact BES Home Centers EFRC External Websites Print Text Size: A A A FeedbackShare Page External Websites of the Energy Frontier Research Centers Centers ordered alphabetically by state and then by center name California Light-Material Interactions in Energy Conversion (LMI) External link Ralph Nuzzo, California

  2. CONTINUOUS EXTRACTED BEAM IN THE AGS FAST EXTERNAL BEAM LINE.

    SciTech Connect (OSTI)

    GLENN,J.W.; TSOUPAS,N.; BROWN,K.A.; BIRYUKOV,V.M.

    2001-06-18

    A method to split off a few percent of the 6 x 10{sup 13} AGS beam delivered to the Slow External Beam (SEB) lines and send it down the Fast External Beam line (FEB) has been developed. The mission is to feed a counter experiment off the FEB that directly measures the neutrino mass using the muon storage ring. The use of normal thin septum splitters would have an excessive loss overhead and been optically difficult. The AGS Slow Extraction uses a third integer resonance with sextuple strength so the resonance width is a few percent of the beam width. This results in a low density tail which will be clipped by a bent crystal and deflected into the FEB channel. This clipping off of the tail should reduce losses in the SEB transport line. Details of modeled orbits, particle distribution and extraction trajectories into and out off the crystal will be given.

  3. Record External Quantum Efficiency in Blue OLED Device

    Office of Energy Efficiency and Renewable Energy (EERE)

    Scientists at Pacific Northwest National Laboratory (PNNL) have created a blue organic light emitting diode (OLED) with an external quantum efficiency (EQE) of 11% at 800 cd/m2, exceeding their previous record EQE of 8%. The EQE of blue OLEDs is a major challenge in OLED technology development. This achievement is particularly notable since it was accomplished at a much lower operating voltage (6.2V) than previous demonstrations using similar structures, revealing the potential for much higher power efficiencies.

  4. Intergovernmental & External Affairs Resources | Department of Energy

    Energy Savers [EERE]

    Resources Intergovernmental & External Affairs Resources Funding and Financial Resources Funding and financing resources for state, local and tribal governments and private and public stakeholders. DOE's Funding & Financing page provides funding information for all-of-the-above energy resources, research, development and technology to market. Federal Finance Tools for Energy Efficiency Upgrades and Clean Energy Deployment Energy Efficiency Renewable Energy Funding Opportunity Exchange

  5. Internal/External Split Field Generator - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Internal/External Split Field Generator Oak Ridge National Laboratory Contact ORNL About This Technology Technology Marketing SummaryThese technologies are designs and methods that boost the efficiency of electric generators by decoupling the magnetic polarity of the driving mechanism while increasing the operational frequency of the machine. Both are unique, low cost methods to develop a generator with a higher power density.DescriptionCommercial applications include stationary, rotational or

  6. EXPERIMENTAL OBSERVATION OF INTERNAL AND EXTERNAL KINKS IN THE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INTERNAL AND EXTERNAL KINKS IN THE RESISTIVE WALL MACHINE by William F. Bergerson A dissertation submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy (Physics) at the UNIVERSITY OF WISCONSIN-MADISON 2008 c Copyright by William F. Bergerson 2008 All Rights Reserved i ACKNOWLEDGMENTS To begin, it is paramount to point out the impossibility of adequately recognizing everyone properly who deserves credit. The list of those who deserve thanks extends well beyond

  7. How Science, Innovation, and Mikayla Nelson are Changing the State of Our Union

    Broader source: Energy.gov [DOE]

    The faces of America’s future success in science and engineering are everywhere. She might be the friendly employee at a neighborhood store... or be seated with the First Lady at the State of the Union. In the case of Mikayla Nelson, she’s both. Last night, the high school freshman from Billings, Montana was seated next to the First Lady. Mikayla earned her place there – as well as personal recognition from the President – by leading her team to a first place finish at the Department of Energy’s National Science Bowl for the design document of their solar car. During her visit to D.C., Mikayla came by the Department's headquarters and met with Secretary Steven Chu and Director of Science Bill Brinkman. She also answered a few questions about her experiences and inspirations.

  8. Measurement of 3D plasma response to external magnetic perturbations in the presence of a rotating external kink

    SciTech Connect (OSTI)

    Shiraki, Daisuke; Angelini, Sarah M.; Byrne, Patrick J.; DeBono, Bryan A.; Hughes, Paul E.; Levesque, Jeffrey P.; Mauel, Michael E.; Navratil, Gerald A.; Peng, Qian; Rhodes, Dov J.; Stoafer, Christopher C.; Maurer, David A.; Rath, Nikolaus

    2013-10-15

    The detailed measurements of the 3D plasma response to applied external magnetic perturbations in the presence of a rotating external kink are presented, and compared with the predictions of a single-helicity linear model of kink mode dynamics. The modular control coils of the High Beta Tokamak-Extended Pulse (HBT-EP) device are used to apply resonant m/n = 3/1 magnetic perturbations to wall-stabilized tokamak plasmas with a pre-existing rotating 3/1 kink mode. The plasma response is measured in high-resolution with the extensive magnetic diagnostic set of the HBT-EP device. The spatial structures of both the naturally rotating kink mode and the externally driven response are independently measured and observed to be identical, while the temporal dynamics are consistent with the independent evolution and superposition of the two modes. This leads to the observation of a characteristic change in 3D field dynamics as a function of the applied field amplitude. This amplitude dependence is found to be different for poloidal and radial fields. The measured 3D response is compared to and shown to be consistent with the predictions of the linear single-helicity model in the “high-dissipation” regime, as reported previously [M. E. Mauel et al., Nucl. Fusion 45, 285 (2005)].

  9. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2009-08-28

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNLs Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNLs Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document.

  10. Environmental externalities: A survey of state commission actions

    SciTech Connect (OSTI)

    Cohen, S.D.; Eto, J.H. [National Association of Regulatory Utility Commissioners, Washington, DC (United States); Goldman, C.A. [Lawrence Berkeley Lab., CA (United States); Beldock, J. [USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Office of Buildings and Community Systems; Crandall, G. [MSB Associates, Middleton, WI (United States)

    1990-05-01

    Awareness of the environmental consequences of electricity production have led many state public utility commissions (PUC) to consider these externalities formally in their regulation of utilities. At the request of NARUC`s Energy Conservation staff subcommittee, the Lawrence Berkeley Laboratory conducted a survey to identify the extent and range of PUC approaches to this issue; responses were obtained from PUC staff in 49 states and the District of Columbia. The study should be viewed as providing a ``snapshot`` of regulatory developments in an area that is evolving rapidly. 16 refs.

  11. Environmental externalities: A survey of state commission actions

    SciTech Connect (OSTI)

    Cohen, S.D.; Eto, J.H. (National Association of Regulatory Utility Commissioners, Washington, DC (United States)); Goldman, C.A. (Lawrence Berkeley Lab., CA (United States)); Beldock, J. (USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Office of Buildings and Community Systems); Crandall, G. (MSB Associates, Middleton, WI (United States))

    1990-05-01

    Awareness of the environmental consequences of electricity production have led many state public utility commissions (PUC) to consider these externalities formally in their regulation of utilities. At the request of NARUC's Energy Conservation staff subcommittee, the Lawrence Berkeley Laboratory conducted a survey to identify the extent and range of PUC approaches to this issue; responses were obtained from PUC staff in 49 states and the District of Columbia. The study should be viewed as providing a snapshot'' of regulatory developments in an area that is evolving rapidly. 16 refs.

  12. Superconductive magnetic energy storage (SMES) external fields and safety considerations

    SciTech Connect (OSTI)

    Polk, C. . Dept. of Electrical Engineering); Boom, R.W.; Eyssa, Y.M. . Applied Superconductivity Center)

    1992-01-01

    This paper addresses preferred SMES configurations and the external magnetic fields which they generate. Possible biological effects of fields are reviewed briefly. It is proposed that SMES units be fenced at the 10 gauss (1 mT) level to keep unrestricted areas safe, even for persons with cardiac pacemakers. For a full size 5000 MWh (1.8 {times} 10 {sup 13} J) SMES the magnetic field decreases to 10 gauss at a radial distance of 2 km from the center of the coil. Other considerations related to the environmental impact of large SMES magnetic fields are discussed briefly.

  13. COLLOQUIUM: EXTERNAL PROPULSION AND THE FUTURE OF SPACE ACCESS | Princeton

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plasma Physics Lab June 24, 2015, 4:15pm to 5:30pm Colloquia MBG Auditorium COLLOQUIUM: EXTERNAL PROPULSION AND THE FUTURE OF SPACE ACCESS Dr. Dmitriy Tseliakhovich Escape Dynamics, Inc. At Escape Dynamics we are working on the next generation propulsion technologies with the goal of developing electromagnetically-powered engines operating at 10x the efficiency of chemical rockets. In this talk I will describe results of Escape Dynamics' R&D efforts and outline our vision for the future

  14. External Independent Review (EIR) Standard Operating Procedure (SOP) October 2015

    Broader source: Energy.gov [DOE]

    The Office of Project Management Oversight and Assessments (PMOA) performs External Independent Reviews (EIRs) to provide Project Management Executives (PMEs), senior leaders within the Department of Energy (DOE), and Congress with an unbiased assessment of whether a capital asset project can be executed within proposed scope, schedule and cost commitments, while also meeting its key performance parameters and ultimately fulfilling its associated mission need. The objectives of this EIR Standard Operating Procedures (SOP) document are to clarify EIR expectations and to facilitate EIR planning and execution by PMOA, its support contractors, DOE Program offices and project teams.

  15. Department of Energy Laboratory Accreditation for External Dosimetry

    Office of Environmental Management (EM)

    DOE-STD-1095-2011 January 2011 DOE STANDARD DEPARTMENT OF ENERGY LABORATORY ACCREDITATION FOR EXTERNAL DOSIMETRY U.S. Department of Energy AREA SAFT Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. ii DOE-STD-1095-2011 This document is available on the Department of Energy Office of Health, Safety and Security Approved DOE Technical Standards Web Site at www.hss.energy.gov/nuclearsafety/ns/techstds/ DOE-STD-1095-2011 iii FOREWORD The

  16. Historical estimates of external gamma exposure and collective external gamma exposure from testing at the Nevada Test Site. I. Test series through HARDTACK II, 1958

    SciTech Connect (OSTI)

    Anspaugh, L.R.; Church, B.W.

    1985-12-01

    In 1959, the Test Manager's Committee to Establish Fallout Doses calculated estimated external gamma exposure at populated locations based upon measurements of external gamma-exposure rate. Using these calculations and estimates of population, we have tabulated the collective estimated external gamma exposures for communities within established fallout patterns. The total collective estimated external gamma exposure is 85,000 person-R. The greatest collective exposures occurred in three general areas: Saint George, Utah; Ely, Nevada; and Las Vegas, Nevada. Three events, HARRY (May 19, 1953), BEE (March 22, 1955), and SMOKY (August 31, 1957), accounted for over half of the total collective estimated external gamma exposure. The bases of the calculational models for external gamma exposure of ''infinite exposure,'' ''estimated exposure,'' and ''one year effective biological exposure'' are explained. 4 figs., 7 tabs.

  17. How can an external application get access to OpenEI images and...

    Open Energy Info (EERE)

    How can an external application get access to OpenEI images and thumbnails? Home > Groups > Developer I'm building an external application in Simile Exhibit. Through an Ask query...

  18. Utility External Disconnect Switch: Practical, Legal, and Technical Reasons to Eliminate the Requirement

    Broader source: Energy.gov [DOE]

    This report documents the safe operation of PV systems without a utility external disconnect switch in several large jurisdictions. It includes recommendations for regulators contemplating utility external disconnect switch requirements.

  19. Director of External Partnerships > Paul Mutolo > Leadership Team > The

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Materials Center at Cornell Director of External Partnerships Paul Mutolo pfm2@cornell.edu Paul F. Mutolo is the Director of External Partnerships for the Energy Materials Center at Cornell. A fuel cell chemist, Paul has been working in the energy sector for over 14 years. Office of External Partnerships At emc2, Paul establishes and maintains technology development and technology transfer projects with industry partners and other external partners. Paul helps communicate the impacts

  20. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-04-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanfords DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNLs Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  1. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2011-04-04

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at the U.S. Department of Energy (DOE) Hanford site. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with requirements of 10 CFR 835, the DOE Laboratory Accreditation Program, the DOE Richland Operations Office, DOE Office of River Protection, DOE Pacific Northwest Office of Science, and Hanfords DOE contractors. The dosimetry system is operated by the Pacific Northwest National Laboratory (PNNL) Hanford External Dosimetry Program which provides dosimetry services to PNNL and all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNLs Electronic Records & Information Capture Architecture database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2.

  2. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2007-03-12

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNLs Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. Rev. 0 marks the first revision to be released through PNNLs Electronic Records & Information Capture Architecture (ERICA) database. Revision numbers that are whole numbers reflect major revisions typically involving changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Minor revision. Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, 9.2.

  3. Hanford External Dosimetry Technical Basis Manual PNL-MA-842

    SciTech Connect (OSTI)

    Rathbone, Bruce A.

    2010-01-01

    The Hanford External Dosimetry Technical Basis Manual PNL-MA-842 documents the design and implementation of the external dosimetry system used at Hanford. The manual describes the dosimeter design, processing protocols, dose calculation methodology, radiation fields encountered, dosimeter response characteristics, limitations of dosimeter design under field conditions, and makes recommendations for effective use of the dosimeters in the field. The manual describes the technical basis for the dosimetry system in a manner intended to help ensure defensibility of the dose of record at Hanford and to demonstrate compliance with 10 CFR 835, DOELAP, DOE-RL, ORP, PNSO, and Hanford contractor requirements. The dosimetry system is operated by PNNLs Hanford External Dosimetry Program (HEDP) which provides dosimetry services to all Hanford contractors. The primary users of this manual are DOE and DOE contractors at Hanford using the dosimetry services of PNNL. Development and maintenance of this manual is funded directly by DOE and DOE contractors. Its contents have been reviewed and approved by DOE and DOE contractors at Hanford through the Hanford Personnel Dosimetry Advisory Committee (HPDAC) which is chartered and chaired by DOE-RL and serves as means of coordinating dosimetry practices across contractors at Hanford. This manual was established in 1996. Since its inception, it has been revised many times and maintained by PNNL as a controlled document with controlled distribution. The first revision to be released through PNNLs Electronic Records & Information Capture Architecture (ERICA) database was designated Revision 0. Revision numbers that are whole numbers reflect major revisions typically involving significant changes to all chapters in the document. Revision numbers that include a decimal fraction reflect minor revisions, usually restricted to selected chapters or selected pages in the document. Maintenance and distribution of controlled hard copies of the manual by PNNL was discontinued beginning with Revision 0.2. Revision Log: Rev. 0 (2/25/2005) Major revision and expansion. Rev. 0.1 (3/12/2007) Updated Chapters 5, 6 and 9 to reflect change in default ring calibration factor used in HEDP dose calculation software. Factor changed from 1.5 to 2.0 beginning January 1, 2007. Pages on which changes were made are as follows: 5.23, 5.69, 5.78, 5.80, 5.82, 6.3, 6.5, 6.29, and 9.2. Rev 0.2 (8/28/2009) Updated Chapters 3, 5, 6, 8 and 9. Chapters 6 and 8 were significantly expanded. References in the Preface and Chapters 1, 2, 4, and 7 were updated to reflect updates to DOE documents. Approved by HPDAC on 6/2/2009. Rev 1.0 (1/1/2010) Major revision. Updated all chapters to reflect the Hanford site wide implementation on January 1, 2010 of new DOE requirements for occupational radiation protection. The new requirements are given in the June 8, 2007 amendment to 10 CFR 835 Occupational Radiation Protection (Federal Register, June 8, 2007. Title 10 Part 835. U.S., Code of Federal Regulations, Vol. 72, No. 110, 31904-31941). Revision 1.0 to the manual replaces ICRP 26 dosimetry concepts and terminology with ICRP 60 dosimetry concepts and terminology and replaces external dose conversion factors from ICRP 51 with those from ICRP 74 for use in measurement of operational quantities with dosimeters. Descriptions of dose algorithms and dosimeter response characteristics, and field performance were updated to reflect changes in the neutron quality factors used in the measurement of operational quantities.

  4. Fast wavelength tuning techniques for external cavity lasers

    DOE Patents [OSTI]

    Wysocki, Gerard (Princeton, NJ); Tittel, Frank K. (Houston, TX)

    2011-01-11

    An apparatus comprising a laser source configured to emit a light beam along a first path, an optical beam steering component configured to steer the light beam from the first path to a second path at an angle to the first path, and a diffraction grating configured to reflect back at least a portion of the light beam along the second path, wherein the angle determines an external cavity length. Included is an apparatus comprising a laser source configured to emit a light beam along a first path, a beam steering component configured to redirect the light beam to a second path at an angle to the first path, wherein the optical beam steering component is configured to change the angle at a rate of at least about one Kilohertz, and a diffraction grating configured to reflect back at least a portion of the light beam along the second path.

  5. GRAVITATIONAL INFALL ONTO MOLECULAR FILAMENTS. II. EXTERNALLY PRESSURIZED CYLINDERS

    SciTech Connect (OSTI)

    Heitsch, Fabian

    2013-10-10

    Two aspects of the evolution of externally pressurized, hydrostatic filaments are discussed. (1) The free-fall accretion of gas onto such a filament will lead to filament parameters (specifically, FWHM-column-density relations) inconsistent with the observations of Arzoumanian et al., except for two cases: for low-mass, isothermal filaments, agreement is found as in the analysis by Fischera and Martin. Magnetized cases, for which the field scales weakly with the density as B?n {sup 1/2}, also reproduce observed parameters. (2) Realistically, the filaments will be embedded not only in gas of non-zero pressure, but also of non-zero density. Thus, the appearance of sheet-embedded filaments is explored. Generating a grid of filament models and comparing the resulting column density ratios and profile shapes with observations suggests that the three-dimensional filament profiles are intrinsically flatter than isothermal, beyond projection and evolution effects.

  6. Case histories of external microbiologically influenced corrosion underneath disbonded coatings

    SciTech Connect (OSTI)

    Pikas, J.L.

    1996-08-01

    External microbiological influenced corrosion (MIC) underneath disbanded pipeline coating systems is a serious dilemma in the industry. In the past and even today, it has not been recognized as such because it has been primarily mistaken for galvanic corrosion. Due to the type of coating materials used in the past, the cleaning process or lack of it, and application methods used, all coating systems have the propensity to develop defects and pinholes where disbandment and this type of microbial corrosion could occur. In addition, the pipeline may or may not have had cathodic protection initially and/or consistently applied. Given these factors and the interaction of bacteria from the soil, moisture availability, and temperature of the pipeline, this paper will discuss the role that microbes play in the disbandment process, thus resulting in corrosion of an underground pipeline. Several case histories, laboratory results, and field findings will be presented.

  7. Exergetic, thermal, and externalities analyses of a cogeneration plant

    SciTech Connect (OSTI)

    Bailey, M.B.; Curtiss, P.; Blanton, P.H.; McBrayer, T.B.

    2006-02-15

    A thermodynamic study of an 88.4 MW cogeneration plant located in the United States is presented in this paper. The feedstock for this actual plant is culm, the waste left from anthracite coal mining. Before combustion in circulating fluidized bed boilers, the usable carbon within the culm is separated from the indigenous rock. The rock and ash waste from the combustion process fill adjacent land previously scared by strip mining. Trees and grass are planted in these areas as part of a land reclamation program. Analyses based on the first and second laws of thermodynamics using actual operating data are first presented to acquaint the reader with the plant's components and operation. Using emission and other relevant environmental data from the plant, all externalities study is outlined that estimates the plant's effect on the local population. The results show that the plant's cycle performs with a coefficient of utilization of 29% and all approximate exergetic efficiency of 34.5%. In order to increase these values, recommended improvements to the plant are noted. In addition, the externality costs associated with the estimated SO{sub 2} and NOx discharge from the culm fed plant are lower (85-95%) than those associated with a similarly sized coal fed plant. The plant's cycle efficiencies are lower than those associated with more modern technologies; such as all integrated gas turbine combined cycle. However, given the abundant, inexpensive supply of feedstock located adjacent to the plant and the environmental benefit of removing culm banks, the plant's existing operation is unique from an economical and environmental viewpoint.

  8. Estimating externalities of biomass fuel cycles, Report 7

    SciTech Connect (OSTI)

    Barnthouse, L.W.; Cada, G.F.; Cheng, M.-D.; Easterly, C.E.; Kroodsma, R.L.; Lee, R.; Shriner, D.S.; Tolbert, V.R.; Turner, R.S.

    1998-01-01

    This report documents the analysis of the biomass fuel cycle, in which biomass is combusted to produce electricity. The major objectives of this study were: (1) to implement the methodological concepts which were developed in the Background Document (ORNL/RFF 1992) as a means of estimating the external costs and benefits of fuel cycles, and by so doing, to demonstrate their application to the biomass fuel cycle; (2) to develop, given the time and resources, a range of estimates of marginal (i.e., the additional or incremental) damages and benefits associated with selected impact-pathways from a new wood-fired power plant, using a representative benchmark technology, at two reference sites in the US; and (3) to assess the state of the information available to support energy decision making and the estimation of externalities, and by so doing, to assist in identifying gaps in knowledge and in setting future research agendas. The demonstration of methods, modeling procedures, and use of scientific information was the most important objective of this study. It provides an illustrative example for those who will, in the future, undertake studies of actual energy options and sites. As in most studies, a more comprehensive analysis could have been completed had budget constraints not been as severe. Particularly affected were the air and water transport modeling, estimation of ecological impacts, and economic valuation. However, the most important objective of the study was to demonstrate methods, as a detailed example for future studies. Thus, having severe budget constraints was appropriate from the standpoint that these studies could also face similar constraints. Consequently, an important result of this study is an indication of what can be done in such studies, rather than the specific numerical estimates themselves.

  9. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007 - 2012; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Hand, Maureen

    2015-06-15

    This presentation provides a summary of IEA Wind Task 26 report on Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007-2012

  10. In Texas, Energy Sec. Moniz to Echo President’s State of the Union Call to Foster Advanced Manufacturing and Innovation

    Broader source: Energy.gov [DOE]

    Secretary of Energy Ernest Moniz will travel to Austin and San Antonio, Texas to highlight the President’s State of the Union Address and the Administration’s efforts to foster innovation and advanced manufacturing

  11. September 16, 2008; HSS/Union Working Group Meeting, Former Worker and Energy Compensation Programs, CAIRS Reporting, Central Worker Data Tracking - Information Package

    Energy Savers [EERE]

    DOE Former Worker/Energy Compensation CAIRS Central Worker Data Tracking September 16, 2008 September 16, 2008 CAIRS Central Worker Data Tracking September 16, 2008 n The information contained in this package is intended to be reference materials pertaining to the September 16, 2008 HSS/Union working group meeting. The informational pieces have been retrieved from the Internet or submitted by HSS and Union representatives for inclusion in the package, and does not necessarily reflect the view,

  12. Cerenkov emission induced by external beam radiation stimulates molecular fluorescence

    SciTech Connect (OSTI)

    Axelsson, Johan; Davis, Scott C.; Gladstone, David J.; Pogue, Brian W.

    2011-07-15

    Purpose: Cerenkov emission is induced when a charged particle moves faster than the speed of light in a given medium. Both x-ray photons and electrons produce optical Cerenkov photons in everyday radiation therapy of tissue; yet, this phenomenon has never been fully documented. This study quantifies the emissions and also demonstrates that the Cerenkov emission can excite a fluorophore, protoporphyrin IX (PpIX), embedded in biological phantoms. Methods: In this study, Cerenkov emission induced by radiation from a clinical linear accelerator is investigated. Biological mimicking phantoms were irradiated with x-ray photons, with energies of 6 or 18 MV, or electrons at energies 6, 9, 12, 15, or 18 MeV. The Cerenkov emission and the induced molecular fluorescence were detected by a camera or a spectrometer equipped with a fiber optic cable. Results: It is shown that both x-ray photons and electrons, at MeV energies, produce optical Cerenkov photons in tissue mimicking media. Furthermore, we demonstrate that the Cerenkov emission can excite a fluorophore, protoporphyrin IX (PpIX), embedded in biological phantoms. Conclusions: The results here indicate that molecular fluorescence monitoring during external beam radiotherapy is possible.

  13. Stirling heat pump external heat systems: An appliance perspective

    SciTech Connect (OSTI)

    Vasilakis, A.D.; Thomas, J.F.

    1992-08-01

    A major issue facing the Stirling Engine Heat Pump is system cost, and, in particular, the cost of the External Heat System (EHS). The need for high temperature at the heater head (600{degree}C to 700{degree}C) results in low combustion system efficiencies unless efficient heat recovery is employed. The balance between energy efficiency and use of costly high temperature materials is critical to design and cost optimization. Blower power consumption and NO{sub x} emissions are also important. A new approach to the design and cost optimization of the EHS system was taken by viewing the system from a natural gas-fired appliance perspective. To develop a design acceptable to gas industry requirements, American National Standards Institute (ANSI) code considerations were incorporated into the design process and material selections. A parametric engineering design and cost model was developed to perform the analysis, including the impact of design on NO{sub x} emissions. Analysis results and recommended EHS design and material choices are given.

  14. Externally heated valve engine -- An alternative to the Stirling engine

    SciTech Connect (OSTI)

    Kazimierski, Z.; Brzeski, L.

    1996-12-31

    A new concept of the Externally Heated Valve (EHV) engine is presented. The principle of the engine operation is described in the introduction to the paper. Heat delivered to the working medium (air) in the heater, or several heaters working commutatively, can come from a combustion chamber or other heat generator such as nuclear reactors or solar collectors. The engine construction is original entirely different from the well-known Stirling engine. New results of the EHV engine computer modeling are presented. This is connected with a new kind of the annular heater applied to the EHV engine. A whirl motion inside the heater is caused to ensure the proper condition of the heat exchanger during the whole engine cycle. Three heaters working commutatively have been considered in this model. Comparisons between the power and efficiency of the Stirling engine and EHV engine have been performed for the same engine capacity, rotational frequency, maximum and minimum temperatures of the working gas and for the same mean pressures of both the engine cycles. The power of the EHV engine is in this case over three times higher than the Stirling engine power, while the efficiency of both the engines is almost the same.

  15. Stirling heat pump external heat systems: An appliance perspective

    SciTech Connect (OSTI)

    Vasilakis, A.D. ); Thomas, J.F. )

    1992-01-01

    A major issue facing the Stirling Engine Heat Pump is system cost, and, in particular, the cost of the External Heat System (EHS). The need for high temperature at the heater head (600{degree}C to 700{degree}C) results in low combustion system efficiencies unless efficient heat recovery is employed. The balance between energy efficiency and use of costly high temperature materials is critical to design and cost optimization. Blower power consumption and NO{sub x} emissions are also important. A new approach to the design and cost optimization of the EHS system was taken by viewing the system from a natural gas-fired appliance perspective. To develop a design acceptable to gas industry requirements, American National Standards Institute (ANSI) code considerations were incorporated into the design process and material selections. A parametric engineering design and cost model was developed to perform the analysis, including the impact of design on NO{sub x} emissions. Analysis results and recommended EHS design and material choices are given.

  16. COLLIMATION AND CONFINEMENT OF MAGNETIC JETS BY EXTERNAL MEDIA

    SciTech Connect (OSTI)

    Levinson, Amir; Begelman, Mitchell C. E-mail: mitch@jila.colorado.edu

    2013-02-20

    We study the collimation of a highly magnetized jet by a surrounding cocoon that forms as a result of the interaction of the jet with the external medium. We show that in regions where the jet is well confined by the cocoon, current-driven instabilities should develop over timescales shorter than the expansion time of the jet's head. We speculate that these instabilities would give rise to complete magnetic field destruction, whereby the jet undergoes a transition from high to low sigma above the collimation zone. Using this assumption, we construct a self-consistent model for the evolution of the jet-cocoon system in an ambient medium of arbitrary density profile. We apply the model to jet breakout in long gamma-ray bursts (GRBs) and show that the jet is highly collimated inside the envelope of the progenitor star and is likely to remain confined well after breakout. We speculate that this strong confinement may provide a channel for magnetic field conversion in GRB outflows, whereby the hot, low-sigma jet section thereby produced is the source of the photospheric emission observed in many bursts.

  17. HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External

    Energy Savers [EERE]

    Power Supplies | Department of Energy HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External Power Supplies HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External Power Supplies Hewlett-Packard Company (HP) appreciates the opportunity to comment on the new DOE rulemaking for Battery Chargers and External Power Supplies. Thank you for taking the time to speak with us. HP believes that existing voluntary Market Access Requirements, such as EPEAT and ENERGY

  18. Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    | Department of Energy Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results Mixed-mode diesel HCCI with External Mixture Formation: Preliminary Results 2003 DEER Conference Presentation: The Ohio State University PDF icon 2003_deer_rizzoni.pdf More Documents & Publications Diesel HCCI with External Mixture Preparation Gasoline-like fuel effects on advanced combustion regimes A Mixed Mode HCCI/DI Engine Based on a Novel Heavy Fuel Atomizer

  19. HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External

    Office of Environmental Management (EM)

    Power Supplies | Department of Energy HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External Power Supplies HP Ex Parte Memo on Proposed Rulemaking for Battery Chargers and External Power Supplies Hewlett-Packard Company (HP) appreciates the opportunity to comment on the new DOE rulemaking for Battery Chargers and External Power Supplies. Thank you for taking the time to speak with us. HP believes that existing voluntary Market Access Requirements, such as EPEAT and ENERGY

  20. Copy of FINAL SG Demo Project List 11 13 09-External.xls | Department of

    Office of Environmental Management (EM)

    Energy Copy of FINAL SG Demo Project List 11 13 09-External.xls Copy of FINAL SG Demo Project List 11 13 09-External.xls PDF icon Copy of FINAL SG Demo Project List 11 13 09-External.xls More Documents & Publications Smart Grid Regional and Energy Storage Demonstration Projects: Awards Energy Storage Activities in the United States Electricity Grid. May 2011 Fact Sheet: Grid-Scale Energy Storage Demonstration Using UltraBattery Technology (August 2013)

  1. Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Hose Has Been Submitted for Testing (November 2008) No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) to someone by E-mail Share Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Facebook Tweet about Alternative Fuels Data Center: No E85-Compatible, External Fuel Delivery Hose Has Been Submitted for Testing (November 2008) on Twitter Bookmark Alternative Fuels Data

  2. External Merit Review for the Atmosphere to Electrons (A2e) Initiative |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy External Merit Review for the Atmosphere to Electrons (A2e) Initiative External Merit Review for the Atmosphere to Electrons (A2e) Initiative The Atmosphere to Electrons (A2e) Initiative within the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy held an External Merit Review in Washington, DC, on February 4-5, 2014. The External Review Panel reviewed the current program planning and provided suggestions on the formulation of A2e

  3. Microsoft Word - External Export Control Guidance 6-09 _rev 1...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ITER USIPO Export Control Awareness Recommendations to United States External Parties Supporting the Fusion Project June 5, 2009 Commercial Vendors, Universities and others working...

  4. Report of the external expert peer review panel: DOE benefits forecasts

    SciTech Connect (OSTI)

    None, None

    2006-12-20

    A report for the FY 2007 GPRA methodology review, highlighting the views of an external expert peer review panel on DOE benefits forecasts.

  5. 2014-10-02 Issuance: Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Proposed Rulemaking

    Broader source: Energy.gov [DOE]

    Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Proposed Rulemaking

  6. External Beam Radiotherapy for Colon Cancer: Patterns of Care

    SciTech Connect (OSTI)

    Dunn, Emily F., E-mail: dunn@humonc.wisc.ed [Department of Human Oncology, University of Wisconsin School of Medicine and Public Health, Madison, WI (United States); Kozak, Kevin R. [Department of Human Oncology, University of Wisconsin School of Medicine and Public Health, Madison, WI (United States); Moody, John S. [Division of Radiation Oncology, Moses Cone Regional Cancer Center, Greensboro, NC (United States)

    2010-04-15

    Purpose: Despite its common and well characterized use in other gastrointestinal malignancies, little is known about radiotherapy (RT) use in nonmetastatic colon cancer in the United States. To address the paucity of data regarding RT use in colon cancer management, we examined the RT patterns of care in this patient population. Methods and Materials: Patients with nonmetastatic colon cancer, diagnosed between 1988 and 2005, were identified in the Surveillance, Epidemiology, and End Results (SEER) database. Univariate and multivariate methods were used to identify factors associated with RT use. Results: On univariate analysis, tumor location, age, sex, race, T stage, N stage, and geographic location were each associated with differences in RT use (all p < 0.01). In general, younger patients, male patients, and patients with more advanced disease were more likely to receive RT. On multivariate analysis, tumor location, age, gender, T and N stage, time of diagnosis and geographic location were significantly associated with RT use (all p < 0.001). Race, however, was not associated with RT use. On multivariate analysis, patients diagnosed in 1988 were 2.5 times more likely to receive RT than those diagnosed in 2005 (p = 0.001). Temporal changes in RT use reflect a responsiveness to evolving evidence related to the therapeutic benefits of adjuvant RT. Conclusions: External beam RT is infrequently used for colon cancer, and its use varies according to patient and tumor characteristics. RT use has declined markedly since the late 1980s; however, it continues to be used for nonmetastatic disease in a highly individualized manner.

  7. Issues and methods in incorporating environmental externalities into the integrated resource planning process

    SciTech Connect (OSTI)

    Fang, J.M.; Galen, P.S.

    1994-11-01

    This report is a review of current practices and policies in considering environmental externalities in the integrated resource planning and performance based regulation (IRP/PBR) process. The following issues are presented and examined: What are the pros and cons of treating environmental externalities in the IRP process? How are potential future environmental regulations being treated? Are externalities being qualitatively or quantitatively considered, or monetized? Are offsets being allowed? How are externality policies being coordinated among different levels and branches of governments? Should environmental externalities be considered in dispatching a utility`s existing resources? What are the procedures for addressing uncertainty in incorporating environmental externalities into IRP? How are externalities valued? What are other approaches to addressing environmental externalities. This report describes seven major approaches for addressing environmental externalities in the IRP process: qualitative treatment, weighting and ranking, cost of control, damage function, percentage adders, monetization by emission, and multiattribute trade-off analysis. The discussion includes a taxonomy of the full range of alternative methods for addressing environmental externalities, a summary of state PUC actions, the role of state laws, the debate on environmental adders, and the choice of methodologies. In addition, this report characterizes the interests of stakeholders such as the electric industry, fuel suppliers, energy consumers, governmental agencies, public interest groups, consultants, and others. It appears that the views, positions, and interests of these stakeholders are affected by their perceptions of the potential impacts on their economic interests or the viability of their position on environmental policy, by the societal perspective they take, and by the orientation of the analysts toward market competition and their respective accumulated expertise.

  8. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 7, 2010 [Feature Stories and Releases] User Facility Highlights at 2010 AGU Fall Meeting Bookmark and Share Scientists from around the world use data from the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility to study the interactions between clouds, aerosol, and radiation. At this year's American Geophysical Union (AGU) Fall Meeting, ARM's scientific users are presenting dozens of oral and poster sessions describing their research using data

  9. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    10, 2009 [Facility News, Feature Stories and Releases] Highlights from DOE Scientific User Facility at AGU Fall Meeting 2009 Bookmark and Share Scientists from around the world use data from the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility to study the interactions between clouds, aerosol, and radiation. At this year's American Geophysical Union (AGU) Fall Meeting, scientists will present oral and poster sessions of their research using these data

  10. A compact chaotic laser device with a two-dimensional external cavity structure

    SciTech Connect (OSTI)

    Sunada, Satoshi Adachi, Masaaki; Fukushima, Takehiro; Shinohara, Susumu; Arai, Kenichi; Harayama, Takahisa

    2014-06-16

    We propose a compact chaotic laser device, which consists of a semiconductor laser and a two-dimensional (2D) external cavity for delayed optical feedback. The overall size of the device is within 230 μm × 1 mm. A long time delay sufficient for chaos generation can be achieved with the small area by the multiple reflections at the 2D cavity boundary, and the feedback strength is controlled by the injection current to the external cavity. We experimentally demonstrate that a variety of output properties, including chaotic output, can be selectively generated by controlling the injection current to the external cavity.

  11. CEA … External Power Supplies, CCE Overview and Update presentation, dated

    Office of Environmental Management (EM)

    June 28, 2011. | Department of Energy CEA … External Power Supplies, CCE Overview and Update presentation, dated June 28, 2011. CEA … External Power Supplies, CCE Overview and Update presentation, dated June 28, 2011. This document is the U.S. Department of Energys presentation titled CEA … External Power Supplies, CCE Overview and UpdateŽ, presentation date 6/28/2011. PDF icon cea_eps_presentation.pdf More Documents & Publications AHAM - CCE Overview and Update, dated 06/07/2011

  12. Hyperspectral microscopy using an external cavity quantum cascade laser and its applications for explosives detection

    SciTech Connect (OSTI)

    Phillips, Mark C.; Suter, Jonathan D.; Bernacki, Bruce E.

    2012-04-01

    A hyperspectral infrared microscope using external cavity quantum cascade laser illumination and a microbolometer focal plane array is used to characterize nanogram-scale particles of the explosives RDX, tetryl, and PETN at fast acquisition rates.

  13. Engine-External HC-Dosing for Regeneration of Diesel Particulate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Filters for Heavy Duty and NRMM According to Annex XXVII StVZO Engine-External HC-Dosing for Regeneration of Diesel Particulate Filters for Heavy Duty and NRMM According to ...

  14. 2014-02-03 Issuance: Energy Conservation Standards for External Power Supplies; Final Rule

    Broader source: Energy.gov [DOE]

    This document is a pre-publication Federal Register final rule prescribing new energy conservation standards for external power supplies, as issued by the Assistant Secretary on February 3, 2014.

  15. Energy Conservation Standards for Battery Chargers and External Power Supplies; Proposed Rule Making- Ex Parte Communication

    Broader source: Energy.gov [DOE]

    Apple Inc. met with DOE to discuss the notice of proposed rule making the Department sent out regarding battery chargers and external power supplies.  Below is a list of topics that Apple discussed...

  16. Coworker External Dosimetry Data for the Y-12 National Security Complex

    SciTech Connect (OSTI)

    McCartney KA, Watkins JP, Kerr GD, Tankersley WG

    2009-12-18

    Provides background information on the Y-12 coworker external dosimetry data and includes tables with annual values that may be used in the process of assigning doses for unmonitored years of employment.

  17. Impact of External Heat-shielding Techniques on Shell Surface Temperatures

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Dynamic Shell Thermal Deformation of Diesel Engine Emission Control Systems | Department of Energy External Heat-shielding Techniques on Shell Surface Temperatures and Dynamic Shell Thermal Deformation of Diesel Engine Emission Control Systems Impact of External Heat-shielding Techniques on Shell Surface Temperatures and Dynamic Shell Thermal Deformation of Diesel Engine Emission Control Systems Presentation given at DEER 2006, August 20-24, 2006, Detroit, Michigan. Sponsored by the U.S.

  18. Characterization of a swept external cavity quantum cascade laser for rapid

    Office of Scientific and Technical Information (OSTI)

    broadband spectroscopy and sensing (Journal Article) | DOE PAGES Published Article: Characterization of a swept external cavity quantum cascade laser for rapid broadband spectroscopy and sensing Title: Characterization of a swept external cavity quantum cascade laser for rapid broadband spectroscopy and sensing Authors: Brumfield, Brian E. ; Taubman, Matthew S. ; Suter, Jonathan D. ; Phillips, Mark C. Publication Date: 2015-09-21 OSTI Identifier: 1222229 Grant/Contract Number: AC05-76RL01830

  19. Design, Modeling, and Validation of a Flame Reformer for LNT External

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bypass Regeneration | Department of Energy Design, Modeling, and Validation of a Flame Reformer for LNT External Bypass Regeneration Design, Modeling, and Validation of a Flame Reformer for LNT External Bypass Regeneration 2005 Diesel Engine Emissions Reduction (DEER) Conference Presentations and Posters PDF icon 2005_deer_midlam-mohler.pdf More Documents & Publications Eaton Aftertreatment System (EAS) for On-Highway Diesel Engines Diesel Reformers for On-board Hydrogen Applications

  20. Prediction of Multi-Physics Behaviors of Large Lithium-Ion Batteries During Internal and External Short Circuit (Presentation)

    SciTech Connect (OSTI)

    Kim, G. H.; Lee, K. J.; Chaney, L.; Smith, K.; Darcy, E.; Pesaran, A.; Darcy, E.

    2010-11-01

    This presentation describes the multi-physics behaviors of internal and external short circuits in large lithium-ion batteries.

  1. In-air RBS measurements at the LAMFI external beam setup

    SciTech Connect (OSTI)

    Silva, T. F.; Added, N.; Moro, M. V.; Trindade, G. F.; Santos, H. C.; Rodrigues, C. L.; Rizzutto, M. A.; Tabacniks, M. H.

    2014-11-11

    This work describes new developments in the external beam setup of the Laboratory of Material Analysis with Ion Beams of the University of So Paulo (LAMFI-USP). This setup was designed to be a versatile analytical station to analyze a broad range of samples. In recent developments, we seek the external beam Rutherford Backscattering Spectroscopy (RBS) analysis to complement the Particle Induced X-ray Emission (PIXE) measurements. This work presents the initial results of the external beam RBS analysis as well as recent developments to improve the energy resolution RBS measurements, in particular tests to seek for sources of resolution degradation. These aspects are discussed and preliminary results of in-air RBS analysis of some test samples are presented.

  2. Numerical investigation on operation mode influenced by external frequency in atmospheric pressure barrier discharge

    SciTech Connect (OSTI)

    Wang Qi [Dalian Institute of Semiconductor Technology, School of Electronics Science and Technology, Dalian University of Technology, Dalian 116023 (China); Sun Jizhong; Wang Dezhen [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116023 (China)

    2011-10-15

    The influence of external driving frequency on the discharge mode in the dielectric barrier discharge was investigated with a two-dimensional, self-consistent fluid model. The simulation results show that the helium discharge exhibits three operation modes: Townsend, homogeneous glow, and local glow discharges from the lower frequency (1 kHz) to the higher frequency (100 kHz) under discharge parameters specified in this work. The discharge operates in a Townsend mode when the driving frequency varies from 1 to about 7 kHz; while it exhibits homogenous glow characteristics in an approximate range from 7 to 65 kHz; when the external frequency exceeds 65 kHz, it turns into a local glow discharge. The effects of external driving frequency on the discharge mode were revealed and the physical reasons were discussed.

  3. Enhancement of crystal homogeneity of protein crystals under application of an external alternating current electric field

    SciTech Connect (OSTI)

    Koizumi, H.; Uda, S.; Fujiwara, K.; Nozawa, J.; Tachibana, M.; Kojima, K.

    2014-10-06

    X-ray diffraction rocking-curve measurements were performed on tetragonal hen egg white (HEW) lysozyme crystals grown with and without the application of an external alternating current (AC) electric field. The crystal quality was assessed by the full width at half maximum (FWHM) value for each rocking curve. For two-dimensional maps of the FWHMs measured on the 440 and the 12 12 0 reflection, the crystal homogeneity was improved under application of an external electric field at 1 MHz, compared with that without. In particular, the significant improvement of the crystal homogeneity was observed for the 12 12 0 reflection.

  4. Engine-External HC-Dosing for Regeneration of Diesel Particulate Filters

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Heavy Duty and NRMM According to Annex XXVII StVZO | Department of Energy Engine-External HC-Dosing for Regeneration of Diesel Particulate Filters for Heavy Duty and NRMM According to Annex XXVII StVZO Engine-External HC-Dosing for Regeneration of Diesel Particulate Filters for Heavy Duty and NRMM According to Annex XXVII StVZO This presentation discusses how a diesel particulate filter can be integrated in the exhaust piping of a heavy-duty engine. PDF icon deer08_rembor.pdf More

  5. Submit a Public Comment on The Atmosphere to Electrons (A2e) External Merit

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review Meeting Summary | Department of Energy Submit a Public Comment on The Atmosphere to Electrons (A2e) External Merit Review Meeting Summary Submit a Public Comment on The Atmosphere to Electrons (A2e) External Merit Review Meeting Summary March 5, 2014 - 9:01am Addthis The Atmosphere to Electrons (A2e) Initiative within the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy is a multi-year DOE research initiative targeting significant reductions in the

  6. Aberrant Ovarian Collateral Originating from External Iliac Artery During Uterine Artery Embolization

    SciTech Connect (OSTI)

    Kwon, Joon Ho; Kim, Man Deuk Lee, Kwang-hun; Lee, Myungsu; Lee, Mu Sook; Won, Jong Yun; Park, Sung Il; Lee, Do Yun

    2013-02-15

    We report a case of a 35-year-old woman who underwent uterine artery embolization (UAE) for symptomatic multiple uterine fibroids with collateral aberrant right ovarian artery that originated from the right external iliac artery. We believe that this is the first reported case in the literature of this collateral uterine flow by the right ovarian artery originated from the right external iliac artery. We briefly present the details of the case and review the literature on variations of ovarian artery origin that might be encountered during UAE.

  7. ICP External

    Office of Environmental Management (EM)

    1-23452 Revision 3 Light Water Reactor Sustainability Program Integrated Program Plan April 2015 U.S. Department of Energy Office of Nuclear Energy DISCLAIMER This information was prepared as an account of work sponsored by an agency of the U.S. Government. Neither the U.S. Government nor any agency thereof, nor any of their employees, makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness, of any information,

  8. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    August 20, 2007 [Events] American Geophysical Union (AGU) Fall Meeting Abstracts Due September 6 Bookmark and Share Abstracts are now being accepted for the 2007 Fall Meeting of the American Geophysical Union (AGU) to be held December 10-14 in San Francisco, California. The meeting will cover topics in all areas of Earth and space sciences and is expected to draw a crowd of more than 15,000 from around the world. Many ARM participants are conveners of atmospheric science and global environmental

  9. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    20, 2008 [Events] American Geophysical Union (AGU) Abstracts Due Bookmark and Share Abstracts are now being accepted for the 2008 Fall Meeting of the American Geophysical Union (AGU) to be held December 15-19 in San Francisco, California. The meeting will cover topics in all areas of Earth and space sciences and is expected to draw a crowd of more than 15,000 from around the world. Many ARM participants are conveners of atmospheric science and global environmental change sessions, such as the

  10. The Effect of an Externally Attached Neutrally Buoyant Transmitter on Mortal Injury during Simulated Hydroturbine Passage

    SciTech Connect (OSTI)

    Brown, Richard S.; Pflugrath, Brett D.; Carlson, Thomas J.; Deng, Zhiqun

    2012-02-03

    On their seaward migration, juvenile salmonids commonly pass hydroelectric dams. Fish passing through hydroturbines experience a rapid decrease in pressure as they pass by the turbine blade and the severity of this decompression can be highly variable. This rapid decrease in pressure can result in injuries such as swim bladder rupture, exophthalmia, and emboli and hemorrhaging in the fins and tissues. However, recent research indicates that the presence of a telemetry tag (acoustic, radio, inductive) implanted inside the coelom of a juvenile salmon increases the likelihood that the fish will be injured or die during turbine passage. Thus, previous research conducted using telemetry tags implanted into the coelom of fish may have been inaccurate. Thus, a new technique is needed to provide unbiased estimates of survival through turbines. This research provides an evaluation of the effectiveness of a neutrally buoyant externally attached acoustic transmitter. Both nontagged fish and fish tagged with a neutrally buoyant external transmitter were exposed to a range of rapid decompressions simulating turbine passage. Juvenile Chinook salmon tagged with a neutrally buoyant externally attached acoustic transmitter did not receive a higher degree of barotrauma than their nontagged counterparts. We suggest that future research include field-based comparisons of survival and behavior among fish tagged with a neutrally buoyant external transmitter and those internally implanted with transmitters.

  11. Brushed permanent magnet DC MLC motor operation in an external magnetic field

    SciTech Connect (OSTI)

    Yun, J.; St Aubin, J.; Rathee, S.; Fallone, B. G.

    2010-05-15

    Purpose: Linac-MR systems for real-time image-guided radiotherapy will utilize the multileaf collimators (MLCs) to perform conformal radiotherapy and tumor tracking. The MLCs would be exposed to the external fringe magnetic fields of the linac-MR hybrid systems. Therefore, an experimental investigation of the effect of an external magnetic field on the brushed permanent magnet DC motors used in some MLC systems was performed. Methods: The changes in motor speed and current were measured for varying external magnetic field strengths up to 2000 G generated by an EEV electromagnet. These changes in motor characteristics were measured for three orientations of the motor in the external magnetic field, mimicking changes in motor orientations due to installation and/or collimator rotations. In addition, the functionality of the associated magnetic motor encoder was tested. The tested motors are used with the Varian 120 leaf Millennium MLC (Maxon Motor half leaf and full leaf motors) and the Varian 52 leaf MKII MLC (MicroMo Electronics leaf motor) including a carriage motor (MicroMo Electronics). Results: In most cases, the magnetic encoder of the motors failed prior to any damage to the gearbox or the permanent magnet motor itself. This sets an upper limit of the external magnetic field strength on the motor function. The measured limits of the external magnetic fields were found to vary by the motor type. The leaf motor used with a Varian 52 leaf MKII MLC system tolerated up to 450{+-}10 G. The carriage motor tolerated up to 2000{+-}10 G field. The motors used with the Varian 120 leaf Millennium MLC system were found to tolerate a maximum of 600{+-}10 G. Conclusions: The current Varian MLC system motors can be used for real-time image-guided radiotherapy coupled to a linac-MR system, provided the fringe magnetic fields at their locations are below the determined tolerance levels. With the fringe magnetic fields of linac-MR systems expected to be larger than the tolerance levels determined, some form of magnetic shielding would be required.

  12. at American Geophysical Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are often associated with environments that provide excellent support for microbial life. Because of this, the science team agreed to make a rare backtrack to investigate it...

  13. Dispersion relations of externally and thermally excited dust lattice modes in 2D complex plasma crystals

    SciTech Connect (OSTI)

    Yang Xuefeng; Cui Jian; Zhang Yuan [School of Mathematical Sciences, Dalian University of Technology, Dalian 116024 (China); Liu Yue [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China)

    2012-07-15

    The dispersion relations of the externally and thermally (naturally) excited dust lattice modes (both longitudinal and transverse) in two-dimensional Debye-Yukawa complex plasma crystals are investigated. The dispersion relations are calculated numerically by taking the neutral gas damping effects into account and the numerical results are in agreement with the experimental data given by Nunomura et al.[Phys. Rev. E 65, 066402 (2002)]. It is found that for the mode excited by an external disturbance with a real frequency, the dispersion properties are changed at a critical frequency near where the group velocity of the mode goes to zero. Therefore, the high frequency branch with negative dispersion cannot be reached. In contrast, for the thermally excited mode, the dispersion curve can extend all the way to the negative dispersion region, while a 'cut-off' wave number exists at the long wavelength end of the dispersion in the transverse mode.

  14. Joint probability safety assessment for NPP defense infrastructure against extreme external natural hazards

    SciTech Connect (OSTI)

    Guilin, L.; Defu, L.; Huajun, L.; Fengqing, W.; Tao, Z.

    2012-07-01

    With the increasing tendency of natural hazards, the typhoon, hurricane and tropical Cyclone induced surge, wave, precipitation, flood and wind as extreme external loads menacing Nuclear Power Plants (NPP) in coastal and inland provinces of China. For all of planned, designed And constructed NPP the National Nuclear Safety Administration of China and IAEA recommended Probable Maximum Hurricane /Typhoon/(PMH/T), Probable Maximum Storm Surge (PMSS), Probable Maximum Flood (PMF), Design Basis Flood (DBF) as safety regulations for NPP defense infrastructures. This paper discusses the joint probability analysis of simultaneous occurrence typhoon induced extreme external hazards and compare with IAEA 2006-2009 recommended safety regulation design criteria for some NPP defense infrastructures along China coast. (authors)

  15. Effects of Magnetic Nanoparticles and External Magnetostatic Field on the Bulk Heterojunction Polymer Solar Cells

    SciTech Connect (OSTI)

    Wang, Kai; Yi, Chao; Liu, Chang; Hu, Xiaowen; Chuang, Steven; Gong, Xiong

    2015-03-18

    The price of energy to separate tightly bound electron-hole pair (or charge-transfer state) and extract freely movable charges from low-mobility materials represents fundamental losses for many low-cost photovoltaic devices. In bulk heterojunction (BHJ) polymer solar cells (PSCs), approximately 50% of the total efficiency lost among all energy loss pathways is due to the photogenerated charge carrier recombination within PSCs and low charge carrier mobility of disordered organic materials. To address these issues, we introduce magnetic nanoparticles (MNPs) and orientate these MNPS within BHJ composite by an external magnetostatic field. Over 50% enhanced efficiency was observed from BHJ PSCs incorporated with MNPs and an external magnetostatic field alignment when compared to the control BHJ PSCs. The optimization of BHJ thin film morphology, suppression of charge carrier recombination, and enhancement in charge carrier collection result in a greatly increased short-circuit current density and fill factor, as a result, enhanced power conversion efficiency.

  16. Use of external magnetic fields in hohlraum plasmas to improve laser-coupling

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Montgomery, D. S.; Albright, B. J.; Barnak, D. H.; Chang, P. Y.; Davies, J. R.; Fiksel, G.; Froula, D. H.; Kline, J. L.; MacDonald, M. J.; Sefkow, A. B.; et al

    2015-01-13

    Efficient coupling of laser energy into hohlraum targets is important for indirect drive ignition. Laser-plasma instabilities can reduce coupling, reduce symmetry, and cause preheat. We consider the effects of an external magnetic field on laser-energy coupling in hohlraum targets. Experiments were performed at the Omega Laser Facility using low-Z gas-filled hohlraum targets which were placed in a magnetic coil with Bz ≤ 7.5-T. We found that an external field Bz = 7.5-T aligned along the hohlraum axis results in up to a 50% increase in plasma temperature as measured by Thomson scattering. As a result, the experiments were modeled usingmore » the 2-D magnetohydrodynamics package in HYDRA and were found to be in good agreement.« less

  17. Potential External (non-DOE) Constraints on U.S. Fuel Cycle Options

    SciTech Connect (OSTI)

    Steven J. Piet

    2012-07-01

    The DOE Fuel Cycle Technologies (FCT) Program will be conducting a screening of fuel cycle options in FY2013 to help focus fuel cycle R&D activities. As part of this screening, performance criteria and go/no-go criteria are being identified. To help ensure that these criteria are consistent with current policy, an effort was initiated to identify the status and basis of potentially relevant regulations, laws, and policies that have been established external to DOE. As such regulations, laws, and policies may be beyond DOE’s control to change, they may constrain the screening criteria and internally-developed policy. This report contains a historical survey and analysis of publically available domestic documents that could pertain to external constraints on advanced nuclear fuel cycles. “External” is defined as public documents outside DOE. This effort did not include survey and analysis of constraints established internal to DOE.

  18. Utility-Interconnected Photovoltaic Systems: Evaluating the Rationale for the Utility-Accessible External Disconnect Switch

    SciTech Connect (OSTI)

    Coddington, M.; Margolis, R.M.; Aabakken, J.

    2008-01-01

    The utility-accessible alternating current (AC) external disconnect switch (EDS) for distributed generators, including photovoltaic (PV) systems, is a hardware feature that allows a utility?s employees to manually disconnect a customer-owned generator from the electricity grid. This paper examines the utility-accessible EDS debate in the context of utility-interactive PV systems for residential and small commercial installations. It also evaluates the rationale for EDS requirements.

  19. Energy Systems Integration Facility (ESIF) External Stakeholders Workshop: Workshop Proceedings, 9 October 2008, Golden, Colorado

    SciTech Connect (OSTI)

    Komomua, C.; Kroposki, B.; Mooney, D.; Stoffel, T.; Parsons, B.; Hammond, S.; Kutscher, C.; Remick, R.; Sverdrup, G.; Hawsey, R.; Pacheco, M.

    2009-01-01

    On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.

  20. A Treatment Planning Method for Sequentially Combining Radiopharmaceutical Therapy and External Radiation Therapy;External beam therapy; Radiopharmaceutical therapy; Three-dimensional dosimetry; Treatment planning

    SciTech Connect (OSTI)

    Hobbs, Robert F.; McNutt, Todd; Baechler, Sebastien; He Bin; Esaias, Caroline E.; Frey, Eric C.; Loeb, David M.; Wahl, Richard L.; Shokek, Ori; Sgouros, George

    2011-07-15

    Purpose: Effective cancer treatment generally requires combination therapy. The combination of external beam therapy (XRT) with radiopharmaceutical therapy (RPT) requires accurate three-dimensional dose calculations to avoid toxicity and evaluate efficacy. We have developed and tested a treatment planning method, using the patient-specific three-dimensional dosimetry package 3D-RD, for sequentially combined RPT/XRT therapy designed to limit toxicity to organs at risk. Methods and Materials: The biologic effective dose (BED) was used to translate voxelized RPT absorbed dose (D{sub RPT}) values into a normalized total dose (or equivalent 2-Gy-fraction XRT absorbed dose), NTD{sub RPT} map. The BED was calculated numerically using an algorithmic approach, which enabled a more accurate calculation of BED and NTD{sub RPT}. A treatment plan from the combined Samarium-153 and external beam was designed that would deliver a tumoricidal dose while delivering no more than 50 Gy of NTD{sub sum} to the spinal cord of a patient with a paraspinal tumor. Results: The average voxel NTD{sub RPT} to tumor from RPT was 22.6 Gy (range, 1-85 Gy); the maximum spinal cord voxel NTD{sub RPT} from RPT was 6.8 Gy. The combined therapy NTD{sub sum} to tumor was 71.5 Gy (range, 40-135 Gy) for a maximum voxel spinal cord NTD{sub sum} equal to the maximum tolerated dose of 50 Gy. Conclusions: A method that enables real-time treatment planning of combined RPT-XRT has been developed. By implementing a more generalized conversion between the dose values from the two modalities and an activity-based treatment of partial volume effects, the reliability of combination therapy treatment planning has been expanded.

  1. Evaluation of GafChromic EBT prototype B for external beam dose verification

    SciTech Connect (OSTI)

    Todorovic, M.; Fischer, M.; Cremers, F.; Thom, E.; Schmidt, R.

    2006-05-15

    The capability of the new GafChromic EBT prototype B for external beam dose verification is investigated in this paper. First the general characteristics of this film (dose response, postirradiation coloration, influence of calibration field size) were derived using a flat-bed scanner. In the dose range from 0.1 to 8 Gy, the sensitivity of the EBT prototype B film is ten times higher than the response of the GafChromic HS, which so far was the GafChromic film with the highest sensitivity. Compared with the Kodak EDR2 film, the response of the EBT is higher by a factor of 3 in the dose range from 0.1 to 8 Gy. The GafChromic EBT almost does not show a temporal growth of the optical density and there is no influence of the chosen calibration field size on the dose response curve obtained from this data. A MatLab program was written to evaluate the two-dimensional dose distributions from treatment planning systems and GafChromic EBT film measurements. Verification of external beam therapy (SRT, IMRT) using the above-mentioned approach resulted in very small differences between the planned and the applied dose. The GafChromic EBT prototype B together with the flat-bed scanner and MatLab is a successful approach for making the advantages of the GafChromic films applicable for verification of external beam therapy.

  2. Savings Potential of ENERGY STAR(R) External Power Adapters andBattery Chargers

    SciTech Connect (OSTI)

    Webber, Carrie; Korn, David; Sanchez, Marla

    2007-02-28

    External power adapters may lose 10 to 70 percent of theenergy they consume, dissipated as heat rather than converted into usefulenergy. Battery charging systems have more avenues for losses: inaddition to power conversion losses, power is consumed by the chargingcircuitry, and additional power may be needed after the battery is fullcharged to balance self-discharge. In 2005, the Environmental ProtectionAgency launched a new ENERGY STAR(R) label for external power supplies(EPSs) that convert line-voltage AC electricity into low-voltage DCelectricity for certain electronic devices. The specification includedpower supplies for products with battery charging functions (e.g. laptopsand cell phones), but excluded others. In January 2006, a separatespecification was issued for battery charging systems contained primarilyin small household appliances and power tools. In addition to the ENERGYSTAR(R) label, the state of California will implement minimum energyperformance standards for EPSs in 2007, and similar standards for EPSsand battery chargers are in development at the national level.Many of theproducts covered by these policies use relatively little power and havemodest per-unit savings potential compared to conventional energyefficiency targets. But with an estimated 1.5 billion adapters and 230million battery charging systems in use in the United States, theaggregate savings potential is quite high. This paper presents estimatesof the savings potential for external power adapters and battery chargingsystems through 2025.

  3. IEA Wind Task 26. Wind Technology, Cost, and Performance Trends in Denmark, Germany, Ireland, Norway, the European Union, and the United States: 2007–2012

    SciTech Connect (OSTI)

    Vitina, Aisma; Lüers, Silke; Wallasch, Anna-Kathrin; Berkhout, Volker; Duffy, Aidan; Cleary, Brendan; Husabø, Lief I.; Weir, David E.; Lacal-Arántegui, Roberto; Hand, Maureen; Lantz, Eric; Belyeu, Kathy; Wiser, Ryan H; Bolinger, Mark; Hoen, Ben

    2015-06-01

    The International Energy Agency Implementing Agreement for cooperation in Research, Development, and Deployment of Wind Energy Systems (IEA Wind) Task 26—The Cost of Wind Energy represents an international collaboration dedicated to exploring past, present and future cost of wind energy. This report provides an overview of recent trends in wind plant technology, cost, and performance in those countries that are currently represented by participating organizations in IEA Wind Task 26: Denmark, Germany, Ireland, Norway, and the United States as well as the European Union.

  4. Microsoft PowerPoint - Berkowitz_etal_AGU2011_poster_TCAP_ver3...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Climatology of aerosol optical properties near the New England coast: preparation for the Two Column Aerosol Program (TCAP) field campaign Carl Berkowitz, Duli Chand*, Larry Berg,...

  5. Hyperspectral Microscopy of Explosives Particles Using an External Cavity Quantum Cascade Laser

    SciTech Connect (OSTI)

    Phillips, Mark C.; Bernacki, Bruce E.

    2012-12-26

    Using infrared hyperspectral imaging, we demonstrate microscopy of small particles of the explosives compounds RDX, tetryl, and PETN with near diffraction-limited performance. The custom microscope apparatus includes an external cavity quantum cascade laser illuminator scanned over its tuning range of 9.13-10.53 m in four seconds, coupled with a microbolometer focal plane array to record infrared transmission images. We use the hyperspectral microscopy technique to study the infrared absorption spectra of individual explosives particles, and demonstrate sub-nanogram detection limits.

  6. A tool to detect external cracks from within a metal tube

    SciTech Connect (OSTI)

    Caffey, T.W.H.

    1997-01-01

    A tool using a continuous electromagnetic wave from a transverse magnetic-dipole source with a coaxial electric-dipole receiver is outlined for the detection of external sidewall cracks in boiler tubes. A numerical study of the distribution of the fields shows that the direct transmission from the source to the receiver is reduced from that in free space. Further, if the diameter of the receiver dipole is made sufficiently small, it should be possible to detect cracks with a scattering loss of up to 40dB in thin-walled boiler tubes.

  7. Practical and fast quantum random number generation based on photon arrival time relative to external reference

    SciTech Connect (OSTI)

    Nie, You-Qi; Zhang, Jun Pan, Jian-Wei; Zhang, Hong-Fei; Wang, Jian; Zhang, Zhen; Ma, Xiongfeng

    2014-02-03

    We present a practical high-speed quantum random number generator, where the timing of single-photon detection relative to an external time reference is measured as the raw data. The bias of the raw data can be substantially reduced compared with the previous realizations. The raw random bit rate of our generator can reach 109 Mbps. We develop a model for the generator and evaluate the min-entropy of the raw data. Toeplitz matrix hashing is applied for randomness extraction, after which the final random bits are able to pass the standard randomness tests.

  8. Development of an External Fuel Processor for a Solid Oxide Fuel Cell

    SciTech Connect (OSTI)

    Daniel Birmingham; Crispin Debellis; Mark Perna; Anant Upadhyayula

    2008-02-28

    A 250 kW External Fuel Processor was developed and tested that will supply the gases needed by a pipeline natural gas fueled, solid oxide fuel cell during all modes of operation. The fuel processor consists of three major subsystems--a desulfurizer to remove fuel sulfur to an acceptable level, a synthesis gas generator to support plant heat-up and low load fuel cell operations, and a start gas generator to supply a non-flammable, reducing gas to the fuel cell during startup and shutdown operations. The desulfurization subsystem uses a selective catalytic sulfur oxidation process that was developed for operation at elevated pressure and removes the fuel sulfur to a total sulfur content of less than 80 ppbv. The synthesis gas generation subsystem uses a waterless, catalytic partial oxidation reactor to produce a hydrogen-rich mixture from the natural gas and air. An operating window was defined that allows carbon-free operation while maintaining catalyst temperatures that will ensure long-life of the reactor. The start gas subsystem generates an oxygen-free, reducing gas from the pipeline natural gas using a low-temperature combustion technique. These physically and thermally integrated subsystems comprise the 250 kW External Fuel Processor. The 250 kW External Fuel Processor was tested at the Rolls-Royce facility in North Canton, Ohio to verify process performance and for comparison with design specifications. A step wise operation of the automatic controls through the startup, normal operation and shutdown sequences allowed the control system to be tuned and verified. A fully automated system was achieved that brings the fuel processor through its startup procedure, and then await commands from the fuel cell generator module for fuel supply and shutdown. The fuel processor performance met all design specifications. The 250 kW External Fuel Processor was shipped to an American Electric Power site where it will be tested with a Rolls-Royce solid oxide fuel cell generator module.

  9. Control of light polarization using optically spin-injected vertical external cavity surface emitting lasers

    SciTech Connect (OSTI)

    Frougier, J. Jaffrs, H.; Deranlot, C.; George, J.-M.; Baili, G.; Dolfi, D.; Alouini, M.; Sagnes, I.; Garnache, A.

    2013-12-16

    We fabricated and characterized an optically pumped (100)-oriented InGaAs/GaAsP multiple quantum well Vertical External Cavity Surface Emitting Laser (VECSEL). The structure is designed to allow the integration of a Metal-Tunnel-Junction ferromagnetic spin-injector for future electrical injection. We report here the control at room temperature of the electromagnetic field polarization using optical spin injection in the active medium of the VECSEL. The switching between two highly circular polarization states had been demonstrated using an M-shaped extended cavity in multi-modes lasing. This result witnesses an efficient spin-injection in the active medium of the LASER.

  10. Energy Conservation Program: Test Procedures for External Power Supplies, Notice of Public Meeting

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    external power supplies is an action issued by the Department of Energy. Though it is not intended or expected, should any discrepancy occur between the document posted here and the document published in the Federal Register, the Federal Register publication controls. This document is being made available through the Internet solely as a means to facilitate the public's access to this document. [6450-01-P] DEPARTMENT OF ENERGY 10 CFR Parts 429 and 430 [Docket No. EERE-2014-BT-TP-0043] RIN:

  11. External Dosimetry Program Guide for Use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2005-06-11

    This Guide provides an acceptable methodology for establishing and operating an external dosimetry program that will comply with DOE requirements specified in 10 CFR 835. Cancels: DOE G 441.1-4

  12. Analysis of core damage frequency due to external events at the DOE (Department of Energy) N-Reactor

    SciTech Connect (OSTI)

    Lambright, J.A.; Bohn, M.P.; Daniel, S.L. ); Baxter, J.T. ); Johnson, J.J.; Ravindra, M.K.; Hashimoto, P.O.; Mraz, M.J.; Tong, W.H.; Conoscente, J.P. ); Brosseau, D.A. )

    1990-11-01

    A complete external events probabilistic risk assessment has been performed for the N-Reactor power plant, making full use of all insights gained during the past ten years' developments in risk assessment methodologies. A detailed screening analysis was performed which showed that all external events had negligible contribution to core damage frequency except fires, seismic events, and external flooding. A limited scope analysis of the external flooding risk indicated that it is not a major risk contributor. Detailed analyses of the fire and seismic risks resulted in total (mean) core damage frequencies of 1.96E-5 and 4.60E-05 per reactor year, respectively. Detailed uncertainty analyses were performed for both fire and seismic risks. These results show that the core damage frequency profile for these events is comparable to that found for existing commercial power plants if proposed fixes are completed as part of the restart program. 108 refs., 85 figs., 80 tabs.

  13. GEOTHERMAL Events | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    December 2015 < prev next > Sun Mon Tue Wed Thu Fri Sat 29 30 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 American Geophysical Union (AGU) Fall Meeting 8:00AM to 6:00PM EST 20...

  14. Geometric and Electronic Properties of Graphene Modified by External N-Containing Groups

    SciTech Connect (OSTI)

    Wang, Xinde; Cai, Qiuxia; Zhuang, Guilin; Zhong, Xing; Mei, Donghai; Li, Xiaonian; Wang, Jianguo

    2014-10-14

    By means of the first-principles spin polarized density functional theory (DFT) calculations, we investigated structures and electronic properties of external nitrogen-containing groups (pyridine derivatives) modified graphene via single or double bonding mode. This study of single-bond pyridine derivatives modified graphene (SBPG) shows that the ortho-carbon is the most favorable adsorption site for pyridine derivatives on graphene, as confirmed by bader charge analysis. The external stability of pyridine derivatives on graphene by [2+2] cycloaddition is caused by the match between frontier orbitals of pyridine derivatives and those of graphene, which leading to the formation of stronger chemical bonds. Interestingly, electronic structure analysis reveals that the spin-up and spin-down parts DOS of SBPG clearly split, while it is not found for double-bonds pyridine derivatives modified graphene (DBPG). This work was supported by the 973 project (2013CB733501) and the National Natural Science Foundation of China ( 21101137, 21136001, 21176221, 21306169 and 91334013). D. Mei is supported by the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle.

  15. Integrated reservoir characterization: Improvement in heterogeneities stochastic modelling by integration of additional external constraints

    SciTech Connect (OSTI)

    Doligez, B.; Eschard, R.; Geffroy, F.

    1997-08-01

    The classical approach to construct reservoir models is to start with a fine scale geological model which is informed with petrophysical properties. Then scaling-up techniques allow to obtain a reservoir model which is compatible with the fluid flow simulators. Geostatistical modelling techniques are widely used to build the geological models before scaling-up. These methods provide equiprobable images of the area under investigation, which honor the well data, and which variability is the same than the variability computed from the data. At an appraisal phase, when few data are available, or when the wells are insufficient to describe all the heterogeneities and the behavior of the field, additional constraints are needed to obtain a more realistic geological model. For example, seismic data or stratigraphic models can provide average reservoir information with an excellent areal coverage, but with a poor vertical resolution. New advances in modelisation techniques allow now to integrate this type of additional external information in order to constrain the simulations. In particular, 2D or 3D seismic derived information grids, or sand-shale ratios maps coming from stratigraphic models can be used as external drifts to compute the geological image of the reservoir at the fine scale. Examples are presented to illustrate the use of these new tools, their impact on the final reservoir model, and their sensitivity to some key parameters.

  16. Effects of Magnetic Nanoparticles and External Magnetostatic Field on the Bulk Heterojunction Polymer Solar Cells

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wang, Kai; Yi, Chao; Liu, Chang; Hu, Xiaowen; Chuang, Steven; Gong, Xiong

    2015-03-18

    The price of energy to separate tightly bound electron-hole pair (or charge-transfer state) and extract freely movable charges from low-mobility materials represents fundamental losses for many low-cost photovoltaic devices. In bulk heterojunction (BHJ) polymer solar cells (PSCs), approximately 50% of the total efficiency lost among all energy loss pathways is due to the photogenerated charge carrier recombination within PSCs and low charge carrier mobility of disordered organic materials. To address these issues, we introduce magnetic nanoparticles (MNPs) and orientate these MNPS within BHJ composite by an external magnetostatic field. Over 50% enhanced efficiency was observed from BHJ PSCs incorporated withmore » MNPs and an external magnetostatic field alignment when compared to the control BHJ PSCs. The optimization of BHJ thin film morphology, suppression of charge carrier recombination, and enhancement in charge carrier collection result in a greatly increased short-circuit current density and fill factor, as a result, enhanced power conversion efficiency.« less

  17. Phenomena in oscillating downward propagating flames induced by external laser irradiation method

    SciTech Connect (OSTI)

    Park, June Sung; Fujita, Osamu; Honko, Teruaki; Yamada, Yuichiro; Ito, Hiroyuki; Nakamura, Yuji [Division of Mechanical and Space Engineering, Hokkaido University, Kita13 Nishi8, Kita-ku, Sapporo, Hokkaido (Japan)

    2010-11-15

    Experiments in C{sub 2}H{sub 4}/CO{sub 2}-O{sub 2} premixed flames (Le < 1) propagating downwardly in a tube have been conducted to observe transition phenomena from laminar flame front to turbulent flame propagation triggered by external laser irradiation method. To investigate the exact motions of flame tip fluctuation at the initial moment of irradiating CO{sub 2} laser, the completely flat flame front is selected as a default flame, which is corresponding to the primary acoustic instability as reported by Searby (1992). According to the time-resolved observation, the flame front exposed to CO{sub 2} laser beam shows extremely unstable flame motions in which highly curved flame front towards unburned mixture is subject to diffusive-thermal instability. Then, the sudden enhanced burning state (increased flame surface) caused by flame instability induces the secondary acoustic instability which is akin to the observation in Ref. In the present study, we report the detailed descriptions of flame fronts on the transient behaviors leading the primary acoustic instability to turbulent motions actively induced by the absorption of externally irradiated CO{sub 2} laser beam. (author)

  18. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2008-12-12

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  19. RISK REDUCTION THROUGH USE OF EXTERNAL TECHNICAL REVIEWS, TECHNOLOGY READINESS ASSESSMENTS AND TECHNICAL RISK RATINGS - 9174

    SciTech Connect (OSTI)

    Cercy, M; Steven P Schneider, S; Kurt D Gerdes, K

    2009-01-15

    The U.S. Department of Energy's Office of Environmental Management (DOE-EM) was established to achieve the safe and compliant disposition of legacy wastes and facilities from defense nuclear applications. A large majority of these wastes and facilities are 'one-of-a-kind' and unique to DOE. Many of the programs to treat these wastes have been 'first-of-a-kind' and unprecedented in scope and complexity. This has meant that many of the technologies needed to successfully disposition these wastes were not yet developed or required significant re-engineering to be adapted for DOE-EM's needs. The DOE-EM program believes strongly in reducing the technical risk of its projects and has initiated several efforts to reduce those risks: (1) Technology Readiness Assessments to reduce the risks of deployment of new technologies; (2) External Technical Reviews as one of several steps to ensure the timely resolution of engineering and technology issues; and (3) Technical Risk Ratings as a means to monitor and communicate information about technical risks. This paper will present examples of how Technology Readiness Assessments, External Technical Reviews, and Technical Risk Ratings are being used by DOE-EM to reduce technical risks.

  20. Trace-gas sensing using the compliance voltage of an external cavity quantum cascade laser

    SciTech Connect (OSTI)

    Phillips, Mark C.; Taubman, Matthew S.

    2013-06-04

    Quantum cascade lasers (QCLs) are increasingly being used to detect, identify, and measure levels of trace gases in the air. External cavity QCLs (ECQCLs) provide a broadly-tunable infrared source to measure absorption spectra of chemicals and provide high detection sensitivity and identification confidence. Applications include detecting chemical warfare agents and toxic industrial chemicals, monitoring building air quality, measuring greenhouse gases for atmospheric research, monitoring and controlling industrial processes, analyzing chemicals in exhaled breath for medical diagnostics, and many more. Compact, portable trace gas sensors enable in-field operation in a wide range of platforms, including handheld units for use by first responders, fixed installations for monitoring air quality, and lightweight sensors for deployment in unmanned aerial vehicles (UAVs). We present experimental demonstration of a new chemical sensing technique based on intracavity absorption in an external cavity quantum cascade laser (ECQCL). This new technique eliminates the need for an infrared photodetector and gas cell by detecting the intracavity absorption spectrum in the compliance voltage of the laser device itself. To demonstrate and characterize the technique, we measure infrared absorption spectra of chemicals including water vapor and Freon-134a. Sub-ppm detection limits in one second are achieved, with the potential for increased sensitivity after further optimization. The technique enables development of handheld, high-sensitivity, and high-accuracy trace gas sensors for in-field use.

  1. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 28, 2011 [Events, Facility News] American Geophysical Union Meeting Showcases Science and Outreach Bookmark and Share ARM Archive Manager Raymond McCord and ARM Technical Director Jim Mather speak with visitors to the ARM booth. ARM Archive Manager Raymond McCord and ARM Technical Director Jim Mather speak with visitors to the ARM booth. The ARM Climate Research Facility once again took part in the American Geophysical Union (AGU) Fall Meeting, which attracted an estimated 20,000

  2. Experimental validation of a radio frequency photogun as external electron injector for a laser wakefield accelerator

    SciTech Connect (OSTI)

    Stragier, X. F. D.; Luiten, O. J.; Geer, S. B. van der; Wiel, M. J. van der; Brussaard, G. J. H.

    2011-07-15

    A purpose-built RF-photogun as external electron injector for a laser wakefield accelerator has been thoroughly tested. Different properties of the RF-photogun have been measured such as energy, energy spread and transverse emittance. The focus of this study is the investigation of the smallest possible focus spot and focus stability at the entrance of the plasma channel. For an electron bunch with 10 pC charge and 3.7 MeV kinetic energy, the energy spread was 0.5% with a shot-to-shot stability of 0.05%. After focusing the bunch by a pulsed solenoid lens at 140 mm from the middle of the lens, the focal spot was 40 {mu}m with a shot-to-shot stability of 5 {mu}m. Higher charge leads to higher energy spread and to a larger spot size, due to space charge effects. All properties were found to be close to design values. Given the limited energy of 3.7 MeV, the properties are sufficient for this gun to serve as injector for one particular version of laser wakefield acceleration, i.e., injection ahead of the laser pulse. These measured electron bunch properties were then used as input parameters for simulations of electron bunch injection in a laser wakefield accelerator. The arrival time jitter was deduced from measurements of the energy fluctuation, in combination with earlier measurements using THz coherent transition radiation, and is around 150 fs in the present setup. The bunch length in the focus, simulated using particle tracking, depends on the accelerated charge and goes from 100 fs at 0.1 pC to 1 ps at 50 pC. When simulating the injection of the 3.7 MeV electron bunch of 10 pC in front of a 25 TW laser pulse with a waist of 30 {mu}m in a plasma with a density of 0.7 x 10{sup 24} m{sup -3}, the maximum accelerated charge was found to be 1.2 pC with a kinetic energy of {approx}900 MeV and an energy spread of {approx}5%. The experiments combined with the simulations show the feasibility of external injection and give a prediction of the output parameters that can be expected from a laser wakefield accelerator with external injection of electrons.

  3. MRSA-Infected External Iliac Artery Pseudoaneurysm Treated with Endovascular Stenting

    SciTech Connect (OSTI)

    Clarke, M.G.; Thomas, H.G. Chester, J.F.

    2005-04-15

    A 48-year-old woman with severe juvenile-onset rheumatoid arthritis presented with a bleeding cutaneous sinus distal to her right total hip replacement scar. Methicillin resistant Staphylococcus aureus (MRSA) was isolated on culture. She had previously undergone bilateral total hip and knee replacements at aged 23 and six years later had the right knee prosthesis removed for infection, with subsequent osteomyelitis of the femoral shaft and right total hip prosthesis disruption. Peripheral arteriography was performed in view of persistent bleeding from the sinus, which revealed a 6 cm false aneurysm filling from and compressing the right external iliac artery (EIA). A PTFE-covered, balloon expandable JOSTENT was deployed in the right EIA, successfully excluding the false aneurysm and preventing further bleeding from the sinus. No graft infection was reported at 12 months. This case illustrates the potential use of endovascular stent-grafting in the treatment of an infected pseudoaneurysm.

  4. Environmental Assessment for the Warren Station externally fired combined cycle demonstration project

    SciTech Connect (OSTI)

    1995-04-01

    The proposed Penelec project is one of 5 projects for potential funding under the fifth solicitation under the Clean Coal Technology program. In Penelec, two existing boilers would be replaced at Warren Station, PA; the new unit would produce 73 MW(e) in a combined cycle mode (using both gas-fired and steam turbines). The project would fill the need for a full utility-size demonstration of externally fire combined cycle (EFCC) technology as the next step toward commercialization. This environmental assessment was prepared for compliance with NEPA; its purpose is to provide sufficient basis for determining whether to prepare an environmental impact statement or to issue a finding of no significant impact. It is divided into the sections: purpose and need for proposed action; alternatives; brief description of affected environment; environmental consequences, including discussion of commercial operation beyond the demonstration period.

  5. Bistability, regular self-pulsing, and chaos in lasers with external feedback

    SciTech Connect (OSTI)

    Mueller, R.; Glas, P.

    1985-01-01

    Steady states and dynamic behavior of the light field in a lasing medium contained in the cavity of a Fabry--Perot (FP) resonator are investigated theoretically. The FP resonator is optically coupled to an external resonator (ER), which reflects light back into the laser within a small frequency interval. It is assumed that the lasing threshold cannot be exceeded without feedback from the ER. The losses of the compound-cavity system depend on the light frequency's giving rise to dispersive bistable effects. The static hysteresis cycle as well as transients between its branches has been calculated. Moreover, various types of regular and chaotic self-pulsing that are due to the oscillation of several modes of the compound-cavity sysem have been found, depending on the ratio of longitudinal relaxation time T/sub 1/ to the photon round-trip time T. Finally, phase modulation and frequency chirping have been determined.

  6. Quantum chaos of atoms in a resonator driven by an external resonant field

    SciTech Connect (OSTI)

    Berman, G.P.; Bulgakov, E.N.; Holm, D.D. (Center for Nonlinear Studies, MS-B258, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States) Kirensky Institute of Physics, Research Educational Center for Nonlinear Processes at Krasnoyarsk Polytechnical Institute, Theoretical Department at Krasnoyarsk State University, 660036, Krasnoyarsk (Russian Federation) Theoretical Division, MS-B284, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States))

    1994-06-01

    A system of [ital N] two-level atoms in a resonator is considered interacting with a resonant eigenmode field and with an external coherent field, with a frequency slightly different from the frequency of the atomic transition. A model Hamiltonian is constructed for describing the slow quantum dynamics of the system, and a set of closed [ital c]-number equations for time-dependent quantum expectation values is derived in the boson and spin coherent states. In the region of parameters for developed chaos in the semiclassical limit (when the radiation field is considered classically) we show that the semiclassical approximation is violated by quantum effects at the time scale [tau][sub [h bar

  7. Frequency-doubled vertical-external-cavity surface-emitting laser

    DOE Patents [OSTI]

    Raymond, Thomas D. (Edgewood, NM); Alford, William J. (Albuquerque, NM); Crawford, Mary H. (Albuquerque, NM); Allerman, Andrew A. (Albuquerque, NM)

    2002-01-01

    A frequency-doubled semiconductor vertical-external-cavity surface-emitting laser (VECSEL) is disclosed for generating light at a wavelength in the range of 300-550 nanometers. The VECSEL includes a semiconductor multi-quantum-well active region that is electrically or optically pumped to generate lasing at a fundamental wavelength in the range of 600-1100 nanometers. An intracavity nonlinear frequency-doubling crystal then converts the fundamental lasing into a second-harmonic output beam. With optical pumping with 330 milliWatts from a semiconductor diode pump laser, about 5 milliWatts or more of blue light can be generated at 490 nm. The device has applications for high-density optical data storage and retrieval, laser printing, optical image projection, chemical-sensing, materials processing and optical metrology.

  8. Reflection-Absorption Infrared Spectroscopy of Thin Films Using an External Cavity Quantum Cascade Laser

    SciTech Connect (OSTI)

    Phillips, Mark C.; Craig, Ian M.; Blake, Thomas A.

    2013-02-04

    We present experimental demonstrations using a broadly tunable external cavity quantum cascade laser (ECQCL) to perform Reflection-Absorption InfraRed Spectroscopy (RAIRS) of thin layers and residues on surfaces. The ECQCL compliance voltage was used to measure fluctuations in the ECQCL output power and improve the performance of the RAIRS measurements. Absorption spectra from self-assembled monolayers of a fluorinated alkane thiol and a thiol carboxylic acid were measured and compared with FTIR measurements. RAIRS spectra of the explosive compounds PETN, RDX, and tetryl deposited on gold substrates were also measured. Rapid measurement times and low noise were demonstrated, with < 1E-3 absorbance noise for a 10 second measurement time.

  9. Using Waste Heat for External Processes (English/Chinese) (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Chinese translation of the Using Waste Heat for External Processes fact sheet. Provides suggestions on how to use waste heat in industrial applications. The temperature of exhaust gases from fuel-fired industrial processes depends mainly on the process temperature and the waste heat recovery method. Figure 1 shows the heat lost in exhaust gases at various exhaust gas temperatures and percentages of excess air. Energy from gases exhausted from higher temperature processes (primary processes) can be recovered and used for lower temperature processes (secondary processes). One example is to generate steam using waste heat boilers for the fluid heaters used in petroleum crude processing. In addition, many companies install heat exchangers on the exhaust stacks of furnaces and ovens to produce hot water or to generate hot air for space heating.

  10. Method and apparatus for detecting external cracks from within a metal tube

    DOE Patents [OSTI]

    Caffey, Thurlow W. H. (Albuquerque, NM)

    2001-08-07

    A method and tool using a continuous electromagnetic wave from a transverse magnetic-dipole source with a coaxial electric-dipole receiver is described for the detection of external sidewall cracks and other anomalies in boiler tubes and other enclosures. The invention utilizes the concept of radar backscatter rather than eddy-currents or ultrasound, which are sometimes used in prior art crack-detection methods. A numerical study of the distribution of the fields shows that the direct transmission from the source to the receiver is reduced from that in free space. Further, if the diameter of the receiver dipole is made sufficiently small, it should be possible to detect cracks with a scattering loss of up to -40 dB in thin-walled boiler tubes.

  11. Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

    SciTech Connect (OSTI)

    Kirwan-Taylor, H.; McCabe, G.H.; Lesperance, A.; Kauffman, J.; Serie, P.; Dressen, L.

    1996-09-01

    The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

  12. Grain in weakly ionized plasma in the presence of an external magnetic field: Charging by plasma currents and effective potential

    SciTech Connect (OSTI)

    Momot, A. I.; M.M. Bogolubov Institute for Theoretical Physics, Nat. Acad. Sci. of Ukraine, 14b, Metrologichna Str., Kyiv, 03680

    2013-07-15

    The problem of grain screening is solved numerically for the case of weakly ionized plasma in the presence of an external magnetic field. The plasma dynamics is described within the drift-diffusion approximation under the assumption that the grain absorbs all encountered electrons and ions. We also assume that the plasma current through the grain surface is equal to zero in the stationary state. This condition is used to perform self-consistent calculations of the grain charge. The spatial distribution of the screened grain potential is studied and compared with the analytical estimates. It is shown that at the distances larger than the Debye length such potential has the Coulomb-like asymptotics with the effective charge dependent on the angle between the radius vector and the external magnetic field direction. The numerical solutions show that in the direction parallel to the external magnetic field the effective potential can have nonmonotonic behavior.

  13. Method and design for externally applied laser welding of internal connections in a high power electrochemical cell

    DOE Patents [OSTI]

    Martin, Charles E; Fontaine, Lucien; Gardner, William H

    2014-01-21

    An electrochemical cell includes components that are welded from an external source after the components are assembled in a cell canister. The cell canister houses electrode tabs and a core insert. An end cap insert is disposed opposite the core insert. An external weld source, such as a laser beam, is applied to the end cap insert, such that the end cap insert, the electrode tabs, and the core insert are electrically coupled by a weld which extends from the end cap insert to the core insert.

  14. Characterization of a Swept External Cavity Quantum Cascade Laser For Rapid Broadband Spectroscopy and Sensing

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Brumfield, Brian E.; Taubman, Matthew S.; Suter, Jonathan D.; Phillips, Mark C.

    2015-09-17

    The performance of a rapidly swept external cavity quantum cascade laser (ECQCL) system combined with an open-path Herriott cell was evaluated for time-resolved measurements of chemical species with broad and narrow absorption spectra. A spectral window spanning 1278 1390 cm-1 was acquired at a 200 Hz acquisition rate, corresponding to a tuning rate of 2x104 cm-1/s, with a spectral resolution of 0.2 cm-1. The capability of the ECQCL to measure morethe ECQCL system exhibited noise-equivalent absorption coefficients of 5x10-9 cm-1Hz-1/2. For a spectrum acquisition time of 5 ms, noise-equivalent concentrations (NEC) for N2O and F134A were measured to be 70 and 16 ppbv respectively, which improved to sub-ppbv levels with averaging to 100 s. Noise equivalent column densities of 0.64 and 0.25 in 1 sec are estimated for N2O and F134A.less

  15. Apparatus for measuring surface movement of an object that is subjected to external vibrations

    DOE Patents [OSTI]

    Kotidis, Petros A. (Waban, MA); Woodroffe, Jaime A. (North Reading, MA); Rostler, Peter S. (Newton, MA)

    1997-01-01

    A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

  16. Apparatus for measuring surface movement of an object that is subjected to external vibrations

    DOE Patents [OSTI]

    Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

    1997-04-22

    A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

  17. Technology assessment of external heat systems for Stirling heat pumps. Final report

    SciTech Connect (OSTI)

    Vasilakis, A.D.

    1993-12-01

    A technology assessment and design improvement effort was undertaken for the Stirling engine heat pump external heat system (EHS) in order to reduce costs. It was found that only two applicable EHS design approaches have been developed to any extent: a relatively undeveloped design featuring a premixed fuel and air transpiration burner, and a turbulent diffusion type burner system developed by Mechanical Technology, Inc. To evaluate and optimize the design concepts, an analytical model was developed that examined design and performance variables. The model calculated key temperatures, allowing the specification of materials requirements. Adherence to American National Standards Institute appliance furnace code material specifications was assumed. Concepts for EHS control systems were evaluated, and a cost-effective control system design was developed for the turbulent diffusion burner EHS. The study reveals that optimizing the diffusion burner EHS design can result in significant cost savings. No clear choice between the diffusion burner and transpiration burner systems could be determined from this study, but the designs of both were further developed and improved. Estimates show the EHS based on a transpiration burner to have a manufactured cost that is roughly 70% of the turbulent diffusion burner EHS cost, but fuel efficiency is lower by about 18%.

  18. Extended Durability Testing of an External Fuel Processor for a Solid Oxide Fuel Cell (SOFC)

    SciTech Connect (OSTI)

    Mark Perna; Anant Upadhyayula; Mark Scotto

    2012-11-05

    Durability testing was performed on an external fuel processor (EFP) for a solid oxide fuel cell (SOFC) power plant. The EFP enables the SOFC to reach high system efficiency (electrical efficiency up to 60%) using pipeline natural gas and eliminates the need for large quantities of bottled gases. LG Fuel Cell Systems Inc. (formerly known as Rolls-Royce Fuel Cell Systems (US) Inc.) (LGFCS) is developing natural gas-fired SOFC power plants for stationary power applications. These power plants will greatly benefit the public by reducing the cost of electricity while reducing the amount of gaseous emissions of carbon dioxide, sulfur oxides, and nitrogen oxides compared to conventional power plants. The EFP uses pipeline natural gas and air to provide all the gas streams required by the SOFC power plant; specifically those needed for start-up, normal operation, and shutdown. It includes a natural gas desulfurizer, a synthesis-gas generator and a start-gas generator. The research in this project demonstrated that the EFP could meet its performance and durability targets. The data generated helped assess the impact of long-term operation on system performance and system hardware. The research also showed the negative impact of ambient weather (both hot and cold conditions) on system operation and performance.

  19. Variation in Use of Androgen Suppression With External-Beam Radiotherapy for Nonmetastatic Prostate Cancer

    SciTech Connect (OSTI)

    Swisher-McClure, Samuel; Pollack, Craig E.; Christodouleas, John P.; Guzzo, Thomas J.; Haas, Naomi B.; Vapiwala, Neha; Bekelman, Justin E.

    2012-05-01

    Purpose: To describe practice patterns associated with androgen suppression (AS) stratified by disease risk group in patients undergoing external-beam radiotherapy (EBRT) for localized prostate cancer. Methods and Materials: We identified 2,184 low-risk, 2,339 intermediate-risk, and 2,897 high-risk patients undergoing EBRT for nonmetastatic prostate cancer diagnosed between January 1, 2004, and December 31, 2005, in the linked Surveillance, Epidemiology, and End Results-Medicare database. We examined the association of patient, clinical, and demographic characteristics with AS use by multivariate logistic regression. Results: The proportions of patients receiving AS for low-risk, intermediate-risk, and high-risk prostate cancer were 32.2%, 56.3%, and 81.5%, respectively. AS use among men in the low-risk disease category varied widely, ranging from 13.6% in Detroit to 47.8% in Kentucky. We observed a significant decline in AS use between 2004 and 2005 within all three disease risk categories. Men aged {>=}75 years or with elevated comorbidity levels were more likely to receive AS. Conclusion: Our results identified apparent overuse and underuse of AS among men within the low-risk and high-risk disease categories, respectively. These results highlight the need for clinician and patient education regarding the appropriate use of AS. Practice patterns among intermediate-risk patients reflect the clinical heterogeneity of this population and underscore the need for better evidence to guide the treatment of these patients.

  20. Response of a partial wall to an external perturbation of rotating plasma

    SciTech Connect (OSTI)

    Atanasiu, C. V.; Zakharov, L. E.

    2013-09-15

    In this paper, we present the response of a 3D thin multiply connected wall to an external kink mode perturbation in axisymmetric tokamak configurations. To calculate the contribution of the plasma perturbed magnetic field in the vacuum region, we have made use of the concept of surface currents [following C. V. Atanasiu, A. H. Boozer, L. E. Zakharov, and A. A. Subbotin, Phys. Plasmas 6, 2781 (1999)]. The wall response is expressed in terms of a stream function of the wall surface currents, which are obtained by solving a diffusion type equation, taking into account the contribution of the wall currents themselves iteratively. The use of stream function makes the approach applicable for both well-studied earlier Resistive Wall Modes and for Wall Touching Kink Modes, which were discovered recently as a key phenomenon in disruptions [L. E. Zakharov, S. A. Galkin, and S. N. Gerasimov, Phys. Plasmas 19, 055703 (2012)]. New analytical expressions, suitable for numerical calculations of toroidal harmonics of the vacuum magnetic fields from the surface currents on axisymmetric shells, are derived.

  1. Internal (Annular) and Compressible External (Flat Plate) Turbulent Flow Heat Transfer Correlations.

    SciTech Connect (OSTI)

    Dechant, Lawrence; Smith, Justin

    2016-01-01

    Here we provide a discussion regarding the applicability of a family of traditional heat transfer correlation based models for several (unit level) heat transfer problems associated with flight heat transfer estimates and internal flow heat transfer associated with an experimental simulation design (Dobranich 2014). Variability between semi-empirical free-flight models suggests relative differences for heat transfer coefficients on the order of 10%, while the internal annular flow behavior is larger with differences on the order of 20%. We emphasize that these expressions are strictly valid only for the geometries they have been derived for e.g. the fully developed annular flow or simple external flow problems. Though, the application of flat plate skin friction estimate to cylindrical bodies is a traditional procedure to estimate skin friction and heat transfer, an over-prediction bias is often observed using these approximations for missile type bodies. As a correction for this over-estimate trend, we discuss a simple scaling reduction factor for flat plate turbulent skin friction and heat transfer solutions (correlations) applied to blunt bodies of revolution at zero angle of attack. The method estimates the ratio between axisymmetric and 2-d stagnation point heat transfer skin friction and Stanton number solution expressions for sub-turbulent Reynolds numbers %3C1x10 4 . This factor is assumed to also directly influence the flat plate results applied to the cylindrical portion of the flow and the flat plate correlations are modified by

  2. Time of Decline in Sexual Function After External Beam Radiotherapy for Prostate Cancer

    SciTech Connect (OSTI)

    Siglin, Joshua; Kubicek, Gregory J.; Leiby, Benjamin; Valicenti, Richard K.

    2010-01-15

    Purpose: Erectile dysfunction is one of the most concerning toxicities for patients in the treatment of prostate cancer. The inconsistent evaluation of sexual function (SF) and limited follow-up data have necessitated additional study to clarify the rate and timing of erectile dysfunction after external beam radiotherapy (EBRT) for prostate cancer. Methods and Materials: A total of 143 men completed baseline data on SF before treatment and at the subsequent follow-up visits. A total of 1187 validated SF inventories were analyzed from the study participants. Multiple domains of SF (sex drive, erectile function, ejaculatory function, and overall satisfaction) were analyzed for <=8 years of follow-up. Results: The median follow-up was 4.03 years. The strongest predictor of SF after EBRT was SF before treatment. For all domains of SF, the only statistically significant decrease in function occurred in the first 24 months after EBRT. SF stabilized 2 years after treatment completion, with no statistically significant change in any area of SF >2 years after the end of EBRT. Conclusion: These data suggest that SF does not have a continuous decline after EBRT. Instead, SF decreases maximally within the first 24 months after EBRT, with no significant changes thereafter.

  3. Lumen mass transfer in hollow-fiber membrane processes with constant external resistances

    SciTech Connect (OSTI)

    Qin, Y.; Cabral, J.M.S.

    1997-08-01

    Membrane processes have recently become an accepted unit operation for a wide variety of separations in industry and in environmental applications. Hollow-fiber membrane processes with a constant external resistance having a constant or variable shell concentration resulting from an operational mode of cocurrent or countercurrent are studied. By solving numerically the continuity mass-conservation equation with the corresponding boundary conditions, the lumen laminar mass-transfer coefficients for both cases are correlated. The correlations greatly improve the calculating accuracy of the overall mass-transfer coefficient and can be used to obtain the lumen mixed-cup concentration by an algebraic equation substituting the partial differential equation. A separation factor m{prime} is introduced to characterize the effect of the operational mode. Calculation results demonstrate that the lumen mass-transfer coefficient is independent of the real lumen and shell concentrations, but it is greatly influenced by m{prime}. The countercurrent mode, compared to the cocurrent mode, provides not only a higher mean driving force, but a higher lumen mass-transfer coefficient. This conclusion is novel and valid for the tube-shell heat or mass-transfer processes and is supported by the experimental data in the literature and the authors` gas membrane separation experiments.

  4. Use of external cavity quantum cascade laser compliance voltage in real-time trace gas sensing of multiple chemicals

    SciTech Connect (OSTI)

    Phillips, Mark C.; Taubman, Matthew S.; Kriesel, Jason M.

    2015-02-08

    We describe a prototype trace gas sensor designed for real-time detection of multiple chemicals. The sensor uses an external cavity quantum cascade laser (ECQCL) swept over its tuning range of 940-1075 cm-1 (9.30-10.7 µm) at a 10 Hz repetition rate.

  5. DOE Notice of Proposed Rulemaking to Amend the External Power Supply Test Procedure; Docket No. EERE–2014–BT–TP–0043 / RIN 1904–AD36

    Broader source: Energy.gov [DOE]

    On 12/19/2014, Apple Inc. met with DOE to discuss the Notice of Proposed Rulemaking to Amend the External Power Supply Test Procedure.

  6. SU-E-T-577: Commissioning of a Deterministic Algorithm for External Photon Beams

    SciTech Connect (OSTI)

    Zhu, T; Finlay, J; Mesina, C; Liu, H

    2014-06-01

    Purpose: We report commissioning results for a deterministic algorithm for external photon beam treatment planning. A deterministic algorithm solves the radiation transport equations directly using a finite difference method, thus improve the accuracy of dose calculation, particularly under heterogeneous conditions with results similar to that of Monte Carlo (MC) simulation. Methods: Commissioning data for photon energies 6 15 MV includes the percentage depth dose (PDD) measured at SSD = 90 cm and output ratio in water (Spc), both normalized to 10 cm depth, for field sizes between 2 and 40 cm and depths between 0 and 40 cm. Off-axis ratio (OAR) for the same set of field sizes was used at 5 depths (dmax, 5, 10, 20, 30 cm). The final model was compared with the commissioning data as well as additional benchmark data. The benchmark data includes dose per MU determined for 17 points for SSD between 80 and 110 cm, depth between 5 and 20 cm, and lateral offset of up to 16.5 cm. Relative comparisons were made in a heterogeneous phantom made of cork and solid water. Results: Compared to the commissioning beam data, the agreement are generally better than 2% with large errors (up to 13%) observed in the buildup regions of the FDD and penumbra regions of the OAR profiles. The overall mean standard deviation is 0.04% when all data are taken into account. Compared to the benchmark data, the agreements are generally better than 2%. Relative comparison in heterogeneous phantom is in general better than 4%. Conclusion: A commercial deterministic algorithm was commissioned for megavoltage photon beams. In a homogeneous medium, the agreement between the algorithm and measurement at the benchmark points is generally better than 2%. The dose accuracy for a deterministic algorithm is better than a convolution algorithm in heterogeneous medium.

  7. SU-E-T-578: MCEBRT, A Monte Carlo Code for External Beam Treatment Plan Verifications

    SciTech Connect (OSTI)

    Chibani, O; Ma, C; Eldib, A

    2014-06-01

    Purpose: Present a new Monte Carlo code (MCEBRT) for patient-specific dose calculations in external beam radiotherapy. The code MLC model is benchmarked and real patient plans are re-calculated using MCEBRT and compared with commercial TPS. Methods: MCEBRT is based on the GEPTS system (Med. Phys. 29 (2002) 835846). Phase space data generated for Varian linac photon beams (6 15 MV) are used as source term. MCEBRT uses a realistic MLC model (tongue and groove, rounded ends). Patient CT and DICOM RT files are used to generate a 3D patient phantom and simulate the treatment configuration (gantry, collimator and couch angles; jaw positions; MLC sequences; MUs). MCEBRT dose distributions and DVHs are compared with those from TPS in absolute way (Gy). Results: Calculations based on the developed MLC model closely matches transmission measurements (pin-point ionization chamber at selected positions and film for lateral dose profile). See Fig.1. Dose calculations for two clinical cases (whole brain irradiation with opposed beams and lung case with eight fields) are carried out and outcomes are compared with the Eclipse AAA algorithm. Good agreement is observed for the brain case (Figs 2-3) except at the surface where MCEBRT dose can be higher by 20%. This is due to better modeling of electron contamination by MCEBRT. For the lung case an overall good agreement (91% gamma index passing rate with 3%/3mm DTA criterion) is observed (Fig.4) but dose in lung can be over-estimated by up to 10% by AAA (Fig.5). CTV and PTV DVHs from TPS and MCEBRT are nevertheless close (Fig.6). Conclusion: A new Monte Carlo code is developed for plan verification. Contrary to phantombased QA measurements, MCEBRT simulate the exact patient geometry and tissue composition. MCEBRT can be used as extra verification layer for plans where surface dose and tissue heterogeneity are an issue.

  8. NREL Researchers Demonstrate External Quantum Efficiency Surpassing 100% in a Quantum Dot Solar Cell (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-12-01

    A new device that produces and collects multiple electrons per photon could yield inexpensive, high-efficiency photovoltaics. A new device developed through research at the National Renewable Energy Laboratory (NREL) reduces conventional losses in photovoltaic (PV) solar cells, potentially increasing the power conversion efficiency-but not the cost-of the solar cells. Solar cells convert optical energy from the sun into usable electricity; however, almost 50% of the incident energy is lost as heat with present-day technologies. High-efficiency, multi-junction cells reduce this heat loss, but their cost is significantly higher. NREL's new device uses excess energy in solar photons to create extra charges rather than heat. This was achieved using 5-nanometer-diameter quantum dots of lead selenide (PbSe) tightly packed into a film. The researchers chemically treated the film, and then fabricated a device that yielded an external quantum efficiency (number of electrons produced per incident photon) exceeding 100%, a value beyond that of all current solar cells for any incident photon. Quantum dots are known to efficiently generate multiple excitons (a bound electron-hole pair) per absorbed high-energy photon, and this device definitively demonstrates the collection of multiple electrons per photon in a PV cell. The internal quantum efficiency corrects for photons that are not absorbed in the photoactive layer and shows that the PbSe film generates 30% to 40% more electrons in the high-energy spectral region than is possible with a conventional solar cell. While the unoptimized overall power conversion efficiency is still low (less than 5%), the results have important implications for PV because such high quantum efficiency can lead to more electrical current produced than possible using present technologies. Furthermore, this fabrication is also amenable to inexpensive, high-throughput roll-to-roll manufacturing.

  9. External Peer Review Team Report Underground Testing Area Subproject for Frenchman Flat, Revision 1

    SciTech Connect (OSTI)

    Sam Marutzky

    2010-09-01

    An external peer review was conducted to review the groundwater models used in the corrective action investigation stage of the Underground Test Area (UGTA) subproject to forecast zones of potential contamination in 1,000 years for the Frenchman Flat area. The goal of the external peer review was to provide technical evaluation of the studies and to assist in assessing the readiness of the UGTA subproject to progress to monitoring activities for further model evaluation. The external peer review team consisted of six independent technical experts with expertise in geology, hydrogeology,'''groundwater modeling, and radiochemistry. The peer review team was tasked with addressing the following questions: 1. Are the modeling approaches, assumptions, and model results for Frenchman Flat consistent with the use of modeling studies as a decision tool for resolution of environmental and regulatory requirements? 2. Do the modeling results adequately account for uncertainty in models of flow and transport in the Frenchman Flat hydrological setting? a. Are the models of sufficient scale/resolution to adequately predict contaminant transport in the Frenchman Flat setting? b. Have all key processes been included in the model? c. Are the methods used to forecast contaminant boundaries from the transport modeling studies reasonable and appropriate? d. Are the assessments of uncertainty technically sound and consistent with state-of-the-art approaches currently used in the hydrological sciences? 3. Are the datasets and modeling results adequate for a transition to Corrective Action Unit monitoring studiesthe next stage in the UGTA strategy for Frenchman Flat? The peer review team is of the opinion that, with some limitations, the modeling approaches, assumptions, and model results are consistent with the use of modeling studies for resolution of environmental and regulatory requirements. The peer review team further finds that the modeling studies have accounted for uncertainty in models of flow and transport in the Frenchman Flat except for a few deficiencies described in the report. Finally, the peer review team concludes that the UGTA subproject has explored a wide range of variations in assumptions, methods, and data, and should proceed to the next stage with an emphasis on monitoring studies. The corrective action strategy, as described in the Federal Facility Agreement and Consent Order, states that the groundwater flow and transport models for each corrective action unit will consider, at a minimum, the following: Alternative hydrostratigraphic framework models of the modeling domain. Uncertainty in the radiological and hydrological source terms. Alternative models of recharge. Alternative boundary conditions and groundwater flows. Multiple permissive sets of calibrated flow models. Probabilistic simulations of transport using plausible sets of alternative framework and recharge models, and boundary and groundwater flows from calibrated flow models. Ensembles of forecasts of contaminant boundaries. Sensitivity and uncertainty analyses of model outputs. The peer review team finds that these minimum requirements have been met. While the groundwater modeling and uncertainty analyses have been quite detailed, the peer review team has identified several modeling-related issues that should be addressed in the next phase of the corrective action activities: Evaluating and using water-level gradients from the pilot wells at the Area 5 Radioactive Waste Management Site in model calibration. Re-evaluating the use of geochemical age-dating data to constrain model calibrations. Developing water budgets for the alluvial and upper volcanic aquifer systems in Frenchman Flat. Considering modeling approaches in which calculated groundwater flow directions near the water table are not predetermined by model boundary conditions and areas of recharge, all of which are very uncertain. Evaluating local-scale variations in hydraulic conductivity on the calculated contaminant boundaries. Evaluating the effects of non-steady-state flow conditions on calculated contaminant boundaries, including the effects of long-term declines in water levels, climatic change, and disruption of groundwater system by potential earthquake faulting along either of the two major controlling fault zones in the flow system (the Cane Spring and Rock Valley faults). Considering the use of less-complex modeling approaches. Evaluating the large change in water levels in the vicinity of the Frenchman Flat playa and developing a conceptual model to explain these water-level changes. Developing a long-term groundwater level monitoring program for Frenchman Flat with regular monitoring of water levels at key monitoring wells. Despite these reservations, the peer review team strongly believes that the UGTA subproject should proceed to the next stage.

  10. Allocation of resources in the Soviet Union and China - 1985. Hearing before the Subcommittee on Economic Resources, Competitiveness, and Security Economics of the Joint Economic Committee, Congress of the United States, Ninety-Ninth Congress, Second Session, March 19, 1986

    SciTech Connect (OSTI)

    Not Available

    1986-01-01

    Part II of the hearing record covers a March 19 Executive session, with statements by Douglas MacEachin of the Central Intelligence Agency (CIA), submissions for the record by MacEachin and Admiral Robert Schmitt, and supporting documentation. The purpose of the hearings was to examine economic indicators of the Soviet Union and China in the context of military and national security interests. The study and report represent a cooperative effort on the part of the CIA and the Defense Intelligence Agency. The report focuses on Gorbachev's modernization program, its potential for success, and the military implications if it should fail. The witnesses felt that unlike the Soviets, the Chinese probably understate military expenditures; and the military triangle involving the US, Soviet Union, and China has benefited both the US and China. Submissions for the record make up most of the document.

  11. Optical eye tracking system for real-time noninvasive tumor localization in external beam radiotherapy

    SciTech Connect (OSTI)

    Via, Riccardo Fassi, Aurora; Fattori, Giovanni; Fontana, Giulia; Pella, Andrea; Tagaste, Barbara; Ciocca, Mario; Riboldi, Marco; Baroni, Guido; Orecchia, Roberto

    2015-05-15

    Purpose: External beam radiotherapy currently represents an important therapeutic strategy for the treatment of intraocular tumors. Accurate target localization and efficient compensation of involuntary eye movements are crucial to avoid deviations in dose distribution with respect to the treatment plan. This paper describes an eye tracking system (ETS) based on noninvasive infrared video imaging. The system was designed for capturing the tridimensional (3D) ocular motion and provides an on-line estimation of intraocular lesions position based on a priori knowledge coming from volumetric imaging. Methods: Eye tracking is performed by localizing cornea and pupil centers on stereo images captured by two calibrated video cameras, exploiting eye reflections produced by infrared illumination. Additionally, torsional eye movements are detected by template matching in the iris region of eye images. This information allows estimating the 3D position and orientation of the eye by means of an eye local reference system. By combining ETS measurements with volumetric imaging for treatment planning [computed tomography (CT) and magnetic resonance (MR)], one is able to map the position of the lesion to be treated in local eye coordinates, thus enabling real-time tumor referencing during treatment setup and irradiation. Experimental tests on an eye phantom and seven healthy subjects were performed to assess ETS tracking accuracy. Results: Measurements on phantom showed an overall median accuracy within 0.16 mm and 0.40° for translations and rotations, respectively. Torsional movements were affected by 0.28° median uncertainty. On healthy subjects, the gaze direction error ranged between 0.19° and 0.82° at a median working distance of 29 cm. The median processing time of the eye tracking algorithm was 18.60 ms, thus allowing eye monitoring up to 50 Hz. Conclusions: A noninvasive ETS prototype was designed to perform real-time target localization and eye movement monitoring during ocular radiotherapy treatments. The device aims at improving state-of-the-art invasive procedures based on surgical implantation of radiopaque clips and repeated acquisition of X-ray images, with expected positive effects on treatment quality and patient outcome.

  12. The beaming pattern of external Compton emission from relativistic outflows: The case of anisotropic distribution of electrons

    SciTech Connect (OSTI)

    Kelner, S. R.; Lefa, E.; Rieger, F. M.; Aharonian, F. A.

    2014-04-20

    The beaming pattern of radiation emitted by a relativistically moving source, such as jets in microquasars, active galactic nuclei, and gamma-ray bursts, is a key issue for understanding acceleration and radiation processes in these objects. In this paper, we introduce a formalism based on a solution of the photon transfer equation to study the beaming patterns for emission produced by electrons accelerated in the jet and the upscattering photons of low-energy radiation fields of external origin (the so-called external Compton scenario). The formalism allows us to treat non-stationary, non-homogeneous, and anisotropic distributions of electrons, but assuming homogeneous/isotropic and non-variable target photon fields. We demonstrate the non-negligible impact of the anisotropy in the electron distribution on angular and spectral characteristics of the EC radiation.

  13. F{sub o}F{sub 1}-ATPase activity regulated by external links on {beta} subunits

    SciTech Connect (OSTI)

    Cheng, Jie; Zhang, Xiao-ai; Graduate School of the Chinese Academy of Sciences, Beijing 100049 ; Shu, Yao-Gen; Yue, Jia-Chang

    2010-01-01

    F{sub o}F{sub 1}-ATPase activity is regulated by external links on {beta} subunits with different molecular weight. It is inhibited when anti-{beta} subunit antibody, streptavidin and H9 antibody link on the {beta} subunits successively, but is activated when virus was binded. Western blotting indicated that the employed anti-{beta} antibody target was on the non-catalytic site of the {beta} subunit. Furthermore, an ESR study of spin-labeled ATP (SL-ATP) showed that the affinity of ATP to the holoenzyme increases with increasing external links on the {beta} subunits. This simple regulation method may have great potential in the design of rapid, free labeled, sensitive and selective biosensors.

  14. Submit a Public Comment on The Atmosphere to Electrons (A2e) External Merit Review Meeting Summary

    Broader source: Energy.gov [DOE]

    The Atmosphere to Electrons (A2e) Initiative within the U.S. Department of Energy's (DOE) Office of Energy Efficiency and Renewable Energy is a multi-year DOE research initiative targeting significant reductions in the cost of wind energy through an improved understanding of the complex physics of the wind resource and interaction with wind farms. DOE is now accepting public comments on the meeting summary for the A2e Initiative. DOE held an A2e External Merit Review in Washington, DC, on February 4-5, 2014. The External Review Panel reviewed the current program planning and provided suggestions on the formulation of A2e strategy, goals and implementation approaches.

  15. Simultaneous monitoring of singlet and triplet exciton variations in solid organic semiconductors driven by an external static magnetic field

    SciTech Connect (OSTI)

    Ding, Baofu Alameh, Kamal

    2014-07-07

    The research field of organic spintronics has remarkably and rapidly become a promising research area for delivering a range of high-performance devices, such as magnetic-field sensors, spin valves, and magnetically modulated organic light emitting devices (OLEDs). Plenty of microscopic physical and chemical models based on exciton or charge interactions have been proposed to explain organic magneto-optoelectronic phenomena. However, the simultaneous observation of singlet- and triplet-exciton variations in an external magnetic field is still unfeasible, preventing a thorough theoretical description of the spin dynamics in organic semiconductors. Here, we show that we can simultaneously observe variations of singlet excitons and triplet excitons in an external magnetic field, by designing an OLED structure employing a singlet-exciton filtering and detection layer in conjunction with a separate triplet-exciton detection layer. This OLED structure enables the observation of a Lorentzian and a non-Lorentzian line-shape magnetoresponse for singlet excitons and triplet excitons, respectively.

  16. Ground state energy of an exciton in a spherical quantum dot in the presence of an external magnetic field

    SciTech Connect (OSTI)

    Jahan K, Luhluh Boda, Aalu; Chatterjee, Ashok

    2015-05-15

    The problem of an exciton trapped in a three dimensional Gaussian quantum dot is studied in the presence of an external magnetic field. A variational method is employed to obtain the ground state energy of the exciton as a function of the quantum dot size, the confinement strength and the magnetic field. It is also shown that the variation of the size of the exciton with the radius of the quantum dot.

  17. Using Waste Heat for External Processes; Industrial Technologies Program (ITP) Energy Tips - Process Heating Tip Sheet #10 (Fact Sheet).

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    10 * January 2006 Industrial Technologies Program Using Waste Heat for External Processes The temperature of exhaust gases from fuel-fired industrial processes depends mainly on the process temperature and the waste heat recovery method. Figure 1 shows the heat lost in exhaust gases at various exhaust gas temperatures and percentages of excess air. Energy from gases exhausted from higher temperature processes (primary processes) can be recovered and used for lower temperature processes

  18. Department of Energy’s ARM Climate Research Facility External Data Center Operations Plan Located At Brookhaven National Laboratory

    SciTech Connect (OSTI)

    Cialella, A.; Gregory, L.; Lazar, K.; Liang, M.; Ma, L.; Tilp, A.; Wagener, R.

    2015-05-01

    The External Data Center (XDC) Operations Plan describes the activities performed to manage the XDC, located at Brookhaven National Laboratory (BNL), for the Department of Energy’s Atmospheric Radiation Measurement (ARM) Climate Research Facility. It includes all ARM infrastructure activities performed by the Data Management and Software Engineering Group (DMSE) at BNL. This plan establishes a baseline of expectation within the ARM Operations Management for the group managing the XDC.

  19. Yixing Union | Open Energy Information

    Open Energy Info (EERE)

    Jiangsu Province, China Zip: 214203 Sector: Biomass Product: Yixing-based biomass CHP project developer. Coordinates: 31.36261, 119.816643 Show Map Loading map......

  20. VPP EXPANDING THROUGHOUT EUROPEAN UNION

    Broader source: Energy.gov [DOE]

    WASHINGTON – Recently, the Acting Assistant Secretary of Labor for the Occupational Safety and Health Administration (OSHA) made an important announcement regarding OSHA's Voluntary Protection Program (VPP). He announced that General Electric's (GE) Infrastructure-Security facility in Dublin, Ireland, was the first site accepted into Ireland's VPP Program.

  1. SU-E-J-73: Generation of Volumetric Images with a Respiratory Motion Model Based On An External Surrogate Signal

    SciTech Connect (OSTI)

    Hurwitz, M; Williams, C; Mishra, P; Dhou, S; Lewis, J

    2014-06-01

    Purpose: Respiratory motion during radiotherapy treatment can differ significantly from motion observed during imaging for treatment planning. Our goal is to use an initial 4DCT scan and the trace of an external surrogate marker to generate 3D images of patient anatomy during treatment. Methods: Deformable image registration is performed on images from an initial 4DCT scan. The deformation vectors are used to develop a patient-specific linear relationship between the motion of each voxel and the trajectory of an external surrogate signal. Correlations in motion are taken into account with principal component analysis, reducing the number of free parameters. This model is tested with digital phantoms reproducing the breathing patterns of ten measured patient tumor trajectories, using five seconds of data to develop the model and the subsequent thirty seconds to test its predictions. The model is also tested with a breathing physical anthropomorphic phantom programmed to reproduce a patient breathing pattern. Results: The error (mean absolute, 95th percentile) over 30 seconds in the predicted tumor centroid position ranged from (0.8, 1.3) mm to (2.2, 4.3) mm for the ten patient breathing patterns. The model reproduced changes in both phase and amplitude of the breathing pattern. Agreement between prediction and truth over the entire image was confirmed by assessing the global voxel intensity RMS error. In the physical phantom, the error in the tumor centroid position was less than 1 mm for all images. Conclusion: We are able to reconstruct 3D images of patient anatomy with a model correlating internal respiratory motion with motion of an external surrogate marker, reproducing the expected tumor centroid position with an average accuracy of 1.4 mm. The images generated by this model could be used to improve dose calculations for treatment planning and delivered dose estimates. This work was partially funded by a research grant from Varian Medical Systems.

  2. Real-Time Trace Gas Sensing of Fluorocarbons using a Swept-wavelength External Cavity Quantum Cascade Laser

    SciTech Connect (OSTI)

    Phillips, Mark C.; Taubman, Matthew S.; Bernacki, Bruce E.; Cannon, Bret D.; Stahl, Robert D.; Schiffern, John T.; Myers, Tanya L.

    2014-05-04

    We present results demonstrating real-time sensing of four different fluorocarbons at low-ppb concentrations using an external cavity quantum cascade laser (ECQCL) operating in a swept-wavelength configuration. The ECQCL was repeatedly swept over its full tuning range at a 20 Hz rate with a scan rate of 3535 cm-1/s, and a detailed characterization of the ECQCL scan stability and repeatability is presented. The sensor was deployed on a mobile automotive platform to provide spatially resolved detection of fluorocarbons in outdoor experiments. Noise-equivalent detection limits of 800-1000 parts-per-trillion (ppt) are demonstrated for 1 s integration times.

  3. An ultra-thin diamond membrane as a transmission particle detector and vacuum window for external microbeams

    SciTech Connect (OSTI)

    Grilj, V.; Skukan, N.; Jaki?, M.; Pomorski, M.; Kada, W.; Iwamoto, N.; Kamiya, T.; Ohshima, T.

    2013-12-09

    Several applications of external microbeam techniques demand a very accurate and controlled dose delivery. To satisfy these requirements when post-sample ion detection is not feasible, we constructed a transmission single-ion detector based on an ultra-thin diamond membrane. The negligible intrinsic noise provides an excellent signal-to-noise ratio and enables a hit-detection efficiency of close to 100%, even for energetic protons, while the small thickness of the membrane limits beam spreading. Moreover, because of the superb mechanical stiffness of diamond, this membrane can simultaneously serve as a vacuum window and allow the extraction of an ion microbeam into the atmosphere.

  4. Long-term Operation of an External Cavity Quantum Cascade Laser-based Trace-gas Sensor for Building Air Monitoring

    SciTech Connect (OSTI)

    Phillips, Mark C.; Craig, Ian M.

    2013-11-03

    We analyze the long-term performance and stability of a trace-gas sensor based on an external cavity quantum cascade laser using data collected over a one-year period in a building air monitoring application.

  5. Local changes of work function near rough features on Cu surfaces operated under high external electric field

    SciTech Connect (OSTI)

    Djurabekova, Flyura Ruzibaev, Avaz; Parviainen, Stefan; Holmstrm, Eero; Hakala, Mikko

    2013-12-28

    Metal surfaces operated under high electric fields produce sparks even if they are held in ultra high vacuum. In spite of extensive research on the topic of vacuum arcs, the mystery of vacuum arc origin still remains unresolved. The indications that the sparking rates depend on the material motivate the research on surface response to extremely high external electric fields. In this work by means of density-functional theory calculations we analyze the redistribution of electron density on (100) Cu surfaces due to self-adatoms and in presence of high electric fields from ?1?V/nm up to ?2?V/nm (?1 to ?2 GV/m, respectively). We also calculate the partial charge induced by the external field on a single adatom and a cluster of two adatoms in order to obtain reliable information on charge redistribution on surface atoms, which can serve as a benchmarking quantity for the assessment of the electric field effects on metal surfaces by means of molecular dynamics simulations. Furthermore, we investigate the modifications of work function around rough surface features, such as step edges and self-adatoms.

  6. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    27, 2009 [Events] Call for Abstracts for the 2009 Joint Assembly Conference Bookmark and Share The Joint Assembly meeting of the American Geophysical Union (AGU) will be held in Toronto, Canada, May 24-27, 2009. The event will host over 3,100 participants and will feature presentations highlighting the latest developments in geophysical science, including instrumentation, equipment, software, and programs. Of interest to the ARM community will be a special session titled "Clouds, Radiation

  7. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    December 13, 2014 [Facility News] ARM Facility Insights at the 2014 AGU Fall Meeting Bookmark and Share 1012541_796245997058840_743936320_n At the 2014 American Geophysical Union Fall Meeting in San Francisco, December 15-19, nearly 24,000 scientists from around the world are gathering to share their latest research results in all areas of Earth science. Find out how researchers are using data from U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility-the

  8. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9, 2015 [Facility News] Insights to ARM Facility Activities at 2015 AGU Fall Meeting Bookmark and Share 1012541_796245997058840_743936320_n At the 2015 American Geophysical Union Fall Meeting in San Francisco, December 14-18, nearly 24,000 scientists from around the world are gathering to share their latest research results in all areas of Earth science. Find out how researchers are using data from U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility-the

  9. SubTER Grand Challenge Roundtable: Imaging Geophysical and Geochemical

    Energy Savers [EERE]

    Signals in the Subsurface | Department of Energy SubTER Grand Challenge Roundtable: Imaging Geophysical and Geochemical Signals in the Subsurface SubTER Grand Challenge Roundtable: Imaging Geophysical and Geochemical Signals in the Subsurface PDF icon Grand Challenge Workshop -Imaging Subsurface.pdf More Documents & Publications AGU SubTER Town Hall Presentation 2015 SubTER Fact Sheet SubTER Presentation at Town Hall - American Geophysical Union

  10. ARM - Feature Stories and Releases Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 2011 [Feature Stories and Releases] User Facility Highlights at AGU 2011 Fall Meeting Bookmark and Share Researchers around the world use data from the U.S. Department of Energy's Atmospheric Radiation Measurement (ARM) Climate Research Facility to study the interactions between clouds, aerosols, and radiation. At this year's American Geophysical Union Fall Meeting, ARM's scientific users are presenting dozens of oral and poster sessions describing their research using data from the user

  11. Lead-chalcogenide mid-infrared vertical external cavity surface emitting lasers with improved threshold: Theory and experiment

    SciTech Connect (OSTI)

    Fill, Matthias; Phocone AG, 8005 Zurich ; Debernardi, Pierluigi; Felder, Ferdinand; Zogg, Hans

    2013-11-11

    Mid-infrared Vertical External Cavity Surface Emitting Lasers (VECSEL) based on narrow gap lead-chalcogenide (IV-VI) semiconductors exhibit strongly reduced threshold powers if the active layers are structured laterally for improved optical confinement. This is predicted by 3-d optical calculations; they show that lateral optical confinement is needed to counteract the anti-guiding features of IV-VIs due to their negative temperature dependence of the refractive index. An experimental proof is performed with PbSe quantum well based VECSEL grown on a Si-substrate by molecular beam epitaxy and emitting around 3.3 μm. With proper mesa-etching, the threshold intensity is about 8-times reduced.

  12. Controlling the magnetic susceptibility in an artificial elliptical quantum ring by magnetic flux and external Rashba effect

    SciTech Connect (OSTI)

    Omidi, Mahboubeh Faizabadi, Edris

    2015-03-21

    Magnetic susceptibility is investigated in a man-made elliptical quantum ring in the presence of Rashba spin-orbit interactions and the magnetic flux. It is shown that magnetic susceptibility as a function of magnetic flux changes between negative and positive signs periodically. The periodicity of the Aharonov-Bohm oscillations depends on the geometry of the region where magnetic field is applied, the eccentricity, and number of sites in each chain ring (the elliptical ring is composed of chain rings). The magnetic susceptibility sign can be reversed by tuning the Rashba spin-orbit strength as well. Both the magnetic susceptibility strength and sign can be controlled via external spin-orbit interactions, which can be exploited in spintronics and nanoelectronics.

  13. Pausing and activating thread state upon pin assertion by external logic monitoring polling loop exit time condition

    DOE Patents [OSTI]

    Chen, Dong; Giampapa, Mark; Heidelberger, Philip; Ohmacht, Martin; Satterfield, David L; Steinmacher-Burow, Burkhard; Sugavanam, Krishnan

    2013-05-21

    A system and method for enhancing performance of a computer which includes a computer system including a data storage device. The computer system includes a program stored in the data storage device and steps of the program are executed by a processer. The processor processes instructions from the program. A wait state in the processor waits for receiving specified data. A thread in the processor has a pause state wherein the processor waits for specified data. A pin in the processor initiates a return to an active state from the pause state for the thread. A logic circuit is external to the processor, and the logic circuit is configured to detect a specified condition. The pin initiates a return to the active state of the thread when the specified condition is detected using the logic circuit.

  14. Externally tuned vibration absorber

    DOE Patents [OSTI]

    Vincent, Ronald J. (Latham, NY)

    1987-09-22

    A vibration absorber unit or units are mounted on the exterior housing of a hydraulic drive system of the type that is powered from a pressure wave generated, e.g., by a Stirling engine. The hydraulic drive system employs a piston which is hydraulically driven to oscillate in a direction perpendicular to the axis of the hydraulic drive system. The vibration absorbers each include a spring or other resilient member having one side affixed to the housing and another side to which an absorber mass is affixed. In a preferred embodiment, a pair of vibration absorbers is employed, each absorber being formed of a pair of leaf spring assemblies, between which the absorber mass is suspended.

  15. Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

    DOE Patents [OSTI]

    Schultz, Thomas J. (Maumee, OH); Kotidis, Petros A. (Waban, MA); Woodroffe, Jaime A. (North Reading, MA); Rostler, Peter S. (Newton, MA)

    1995-01-01

    A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading.

  16. Recording of absorption spectra by a three-beam integral technique with a tunable laser and external cavity

    SciTech Connect (OSTI)

    Korolenko, P V; Nikolaev, I V; Ochkin, V N; Tskhai, S N

    2014-04-28

    An integral method is considered for recording absorption using three laser beams transmitted through and reflected from an external cavity with the absorbing medium (R-ICOS). The method is the elaboration of a known single-beam ICOS method and allows suppression of the influence of radiation phase fluctuations in the resonator on recording weak absorption spectra. First of all, this reduces high-frequency instabilities and gives a possibility to record spectra during short time intervals. In this method, mirrors of the resonator may have moderate reflection coefficients. Capabilities of the method have been demonstrated by the examples of weak absorption spectra of atmospheric methane and natural gas in a spectral range around 1650 nm. With the mirrors having the reflection coefficients of 0.80.99, a spectrum can be recorded for 320 ?s with the accuracy sufficient for detecting a background concentration of methane in atmosphere. For the acquisition time of 20 s, the absorption coefficients of ?210{sup -8} cm{sup -1} can be measured, which corresponds to a 40 times less molecule concentration than the background value. (laser spectroscopy)

  17. Method and apparatus for measuring surface movement of a solid object that is subjected to external vibrations

    DOE Patents [OSTI]

    Schultz, T.J.; Kotidis, P.A.; Woodroffe, J.A.; Rostler, P.S.

    1995-04-25

    A system for non-destructively measuring an object and controlling industrial processes in response to the measurement is disclosed in which an impulse laser generates a plurality of sound waves over timed increments in an object. A polarizing interferometer is used to measure surface movement of the object caused by the sound waves and sensed by phase shifts in the signal beam. A photon multiplier senses the phase shift and develops an electrical signal. A signal conditioning arrangement modifies the electrical signals to generate an average signal correlated to the sound waves which in turn is correlated to a physical or metallurgical property of the object, such as temperature, which property may then be used to control the process. External, random vibrations of the workpiece are utilized to develop discernible signals which can be sensed in the interferometer by only one photon multiplier. In addition the interferometer includes an arrangement for optimizing its sensitivity so that movement attributed to various waves can be detected in opaque objects. The interferometer also includes a mechanism for sensing objects with rough surfaces which produce speckle light patterns. Finally the interferometer per se, with the addition of a second photon multiplier is capable of accurately recording beam length distance differences with only one reading. 38 figs.

  18. ISSUANCE 2016-03-24: Notice of Application from Green Electronics for a Small Business Exemption Regarding Certain Products from the Department of Energy’s External Power Supply Energy Conservation Standards

    Broader source: Energy.gov [DOE]

    Notice of Application from Green Electronics for a Small Business Exemption Regarding Certain Products from the Department of Energy’s External Power Supply Energy Conservation Standards

  19. Real-Time Target Position Estimation Using Stereoscopic Kilovoltage/Megavoltage Imaging and External Respiratory Monitoring for Dynamic Multileaf Collimator Tracking

    SciTech Connect (OSTI)

    Cho, Byungchul; Poulsen, Per Rugaard; Sawant, Amit; Ruan, Dan; Keall, Paul J.

    2011-01-01

    Purpose: To develop a real-time target position estimation method using stereoscopic kilovoltage (kV)/megavoltage (MV) imaging and external respiratory monitoring, and to investigate the performance of a dynamic multileaf collimator tracking system using this method. Methods and Materials: The real-time three-dimensional internal target position estimation was established by creating a time-varying correlation model that connected the external respiratory signals with the internal target motion measured intermittently using kV/MV imaging. The method was integrated into a dynamic multileaf collimator tracking system. Tracking experiments were performed for 10 thoracic/abdominal traces. A three-dimensional motion platform carrying a gold marker and a separate one-dimensional motion platform were used to reproduce the target and external respiratory motion, respectively. The target positions were detected by kV (1 Hz) and MV (5.2 Hz) imaging, and external respiratory motion was captured by an optical system (30 Hz). The beam-target alignment error was quantified as the positional difference between the target and circular beam center on the MV images acquired during tracking. The correlation model error was quantified by comparing a model estimate and measured target positions. Results: The root-mean-square errors in the beam-target alignment that had ranged from 3.1 to 7.6 mm without tracking were reduced to <1.5 mm with tracking, except during the model building period (6 s). The root-mean-square error in the correlation model was submillimeters in all directions. Conclusion: A novel real-time target position estimation method was developed and integrated into a dynamic multileaf collimator tracking system and demonstrated an average submillimeter geometric accuracy after initializing the internal/external correlation model. The method used hardware tools available on linear accelerators and therefore shows promise for clinical implementation.

  20. Impact of external industrial sources on the regional and local SO? and O? levels of the Mexico megacity

    SciTech Connect (OSTI)

    Almanza, V. H.; Molina, Luisa T.; Li, Guohui; Fast, Jerome D.; Sosa, G.

    2014-08-22

    The air quality of megacities can be influenced by external emissions sources on both global and regional scale, and at the same time their outflow emissions can exert an important impact to the surrounding environment. The present study evaluates an SO? peak observed on 24 March 2006 at the suburban supersite T1 and ambient air quality monitoring stations located in the north region of the Mexico City Metropolitan Area (MCMA) during MILAGRO campaign. We found that this peak could be related to an important episodic emission event from Tizayuca region, northeast of the MCMA. Back trajectories analyses suggest that the emission event started in the early morning at 10 04:00 LST and lasted for about 9 h. The estimated emission rate is noticeably high, about 2 kgs-. This finding suggests the possibility of "overlooked"emission sources in this region that could influence the air quality of the MCMA. This further motivated us to study the cement plants, including those in the State of Hidalgo and in the State of Mexico, and we found that they can contribute in the NE region of the basin (about 15 41.7%), at the suburban supersite T1 (41.23%) and at some monitoring stations their contribution can be even higher than from the Tula Industrial Complex. The contribution of Tula Industrial Complex to regional ozone levels is estimated. The model suggests low contribution to the MCMA (1 ppb to 4 ppb) and slightly higher at the suburban T1 (6 ppb) and rural T2 (5 ppb) supersites. However, the contribution could be 20 as high as 10 ppb in the upper northwest region of the basin and in the southwest and south-southeast regions of State of Hidalgo. In addition, a first estimate of the potential contribution from flaring activities to regional ozone levels is presented. Emission rates are estimated with a CFD combustion model. Results suggest that up to 30% of the total regional ozone from TIC could be related to flaring activities. 25 Finally, the influence in SO? levels from technological changes in the existing refinery is briefly discussed. These changes are due to the upcoming construction of a new refinery in Tula. The combination of emission reductions in the power plant, the refinery and in local sources in the MCMA could result in higher reductions on the average SO? 26580 Discussion Paper | Discussion Paper | Discussion Paper | Discussion Paper | concentration. Reductions in external sources tend to affect more the northern part of the basin (-16.35% to -45.58%), whilst reductions of urban sources in the megacity tend to diminish SO? levels substantially in the central, southwest, and southeast regions (-30.71% to -49.75%).

  1. SU-E-T-602: Beryllium Seeds Implant for Photo-Neutron Yield Using External Beam Therapy

    SciTech Connect (OSTI)

    Koren, S; Veltchev, I; Furhang, E

    2014-06-01

    Purpose: To evaluate the Neutron yield obtained during prostate external beam irradiation. Methods: Neutrons, that are commonly a radiation safety concern for photon beams with energy above 10 MV, are induced inside a PTV from Beryllium implemented seeds. A high megavoltage photon beam delivered to a prostate will yield neutrons via the reaction Be-9(?,n)2?. Beryllium was chosen for its low gamma,n reaction cross-section threshold (1.67 MeV) to be combined with a high feasible 25 MV photon beam. This beam spectra has a most probable photon energy of 2.5 to 3.0 MeV and an average photon energy of about 5.8 MeV. For this feasibility study we simulated a Beryllium-made common seed dimension (0.1 cm diameter and 0.5 cm height) without taking into account encapsulation. We created a 0.5 cm grid loading pattern excluding the Urethra, using Variseed (Varian inc.) A total of 156 seeds were exported to a 4cm diameter prostate sphere, created in Fluka, a particle transport Monte Carlo Code. Two opposed 25 MV beams were simulated. The evaluation of the neutron dose was done by adjusting the simulated photon dose to a common prostate delivery (e.g. 7560 cGy in 42 fractions) and finding the corresponding neutron dose yield from the simulation. A variance reduction technique was conducted for the neutrons yield and transported. Results: An effective dose of 3.65 cGy due to neutrons was found in the prostate volume. The dose to central areas of the prostate was found to be about 10 cGy. Conclusion: The neutron dose yielded does not justify a clinical implant of Beryllium seeds. Nevertheless, one should investigate the Neutron dose obtained when a larger Beryllium loading is combined with commercially available 40 MeV Linacs.

  2. Biochemical Response to Androgen Deprivation Therapy Before External Beam Radiation Therapy Predicts Long-term Prostate Cancer Survival Outcomes

    SciTech Connect (OSTI)

    Zelefsky, Michael J.; Gomez, Daniel R.; Polkinghorn, William R.; Pei, Xin; Kollmeier, Marisa

    2013-07-01

    Purpose: To determine whether the response to neoadjuvant androgen deprivation therapy (ADT) defined by a decline in prostate-specific antigen (PSA) to nadir values is associated with improved survival outcomes after external beam radiation therapy (EBRT) for prostate cancer. Methods and Materials: One thousand forty-five patients with localized prostate cancer were treated with definitive EBRT in conjunction with neoadjuvant and concurrent ADT. A 6-month course of ADT was used (3 months during the neoadjuvant phase and 2 to 3 months concurrently with EBRT). The median EBRT prescription dose was 81 Gy using a conformal-based technique. The median follow-up time was 8.5 years. Results: The 10-year PSA relapse-free survival outcome among patients with pre-radiation therapy PSA nadirs of ?0.3 ng/mL was 74.3%, compared with 57.7% for patients with higher PSA nadir values (P<.001). The 10-year distant metastases-free survival outcome among patients with pre-radiation therapy PSA nadirs of ?0.3 ng/mL was 86.1%, compared with 78.6% for patients with higher PSA nadir values (P=.004). In a competing-risk analysis, prostate cancer-related deaths were also significantly reduced among patients with pre-radiation therapy PSA nadirs of <0.3 ng/mL compared with higher values (7.8% compared with 13.7%; P=.009). Multivariable analysis demonstrated that the pre-EBRT PSA nadir value was a significant predictor of long-term biochemical tumor control, distant metastases-free survival, and cause-specific survival outcomes. Conclusions: Pre-radiation therapy nadir PSA values of ?0.3 ng/mL after neoadjuvant ADT were associated with improved long-term biochemical tumor control, reduction in distant metastases, and prostate cancer-related death. Patients with higher nadir values may require alternative adjuvant therapies to improve outcomes.

  3. Prognostic Utility of Cell Cycle Progression Score in Men With Prostate Cancer After Primary External Beam Radiation Therapy

    SciTech Connect (OSTI)

    Freedland, Stephen J., E-mail: steve.freedland@duke.edu [Department of Surgery, Durham VA Medical Center, Durham, North Carolina (United States); Department of Surgery (Urology), Duke University School of Medicine, Durham, North Carolina (United States); Department of Pathology, Duke University School of Medicine, Durham, North Carolina (United States); Gerber, Leah [Department of Surgery, Durham VA Medical Center, Durham, North Carolina (United States); Department of Surgery (Urology), Duke University School of Medicine, Durham, North Carolina (United States); Department of Pathology, Duke University School of Medicine, Durham, North Carolina (United States); Reid, Julia; Welbourn, William; Tikishvili, Eliso; Park, Jimmy; Younus, Adib; Gutin, Alexander; Sangale, Zaina; Lanchbury, Jerry S. [Myriad Genetics, Inc, Salt Lake City, Utah (United States); Salama, Joseph K. [Department of Radiation Oncology, Durham VA Medical Center, Durham, North Carolina (United States); Department of Radiation Oncology, Duke University School of Medicine, Durham, North Carolina (United States); Stone, Steven [Myriad Genetics, Inc, Salt Lake City, Utah (United States)

    2013-08-01

    Purpose: To evaluate the prognostic utility of the cell cycle progression (CCP) score, a RNA signature based on the average expression level of 31 CCP genes, for predicting biochemical recurrence (BCR) in men with prostate cancer treated with external beam radiation therapy (EBRT) as their primary curative therapy. Methods and Materials: The CCP score was derived retrospectively from diagnostic biopsy specimens of men diagnosed with prostate cancer from 1991 to 2006 (n=141). All patients were treated with definitive EBRT; approximately half of the cohort was African American. Outcome was time from EBRT to BCR using the Phoenix definition. Median follow-up for patients without BCR was 4.8 years. Association with outcome was evaluated by Cox proportional hazards survival analysis and likelihood ratio tests. Results: Of 141 patients, 19 (13%) had BCR. The median CCP score for patient samples was 0.12. In univariable analysis, CCP score significantly predicted BCR (P=.0017). The hazard ratio for BCR was 2.55 for 1-unit increase in CCP score (equivalent to a doubling of gene expression). In a multivariable analysis that included Gleason score, prostate-specific antigen, percent positive cores, and androgen deprivation therapy, the hazard ratio for CCP changed only marginally and remained significant (P=.034), indicating that CCP provides prognostic information that is not provided by standard clinical parameters. With 10-year censoring, the CCP score was associated with prostate cancer-specific mortality (P=.013). There was no evidence for interaction between CCP and any clinical variable, including ethnicity. Conclusions: Among men treated with EBRT, the CCP score significantly predicted outcome and provided greater prognostic information than was available with clinical parameters. If validated in a larger cohort, CCP score could identify high-risk men undergoing EBRT who may need more aggressive therapy.

  4. SU-E-T-415: An Ionization Chamber Array with High Spatial Resolution for External Beam Radiotherapy

    SciTech Connect (OSTI)

    Togno, M; Wilkens, J; Menichelli, D

    2014-06-01

    Purpose: To characterize an ionization chamber array technology with high spatial resolution and high charge collection efficiency for external beam radiotherapy. Methods: The prototype under test is a linear array of air vented ionization chambers developed by IBA Dosimetry, consisting of 80 pixels with 3.5mm spatial resolution and 4mm{sup 3} sensitive volume. The detector was characterized in a plastic phantom with {sup 60} Co radiation and MV X-rays from an ELEKTA Agility LINAC (with flattened and unflattened beam qualities). Bias voltage was varied in order to evaluate charge collection efficiency. A commercial array of ionization chambers (MatriXX Evolution, IBA Dosimetry) and an amorphous silicon flat panel in direct conversion configuration were used as references. Results: Repeatability (0.4%) and stability under continuous gamma irradiation (0.3%) are very good, in spite of low active volume and sensitivity (?200pC/Gy). Charge collection efficiency is higher than 99% already at 150V with ?2mGy dose per pulse, leading to a 1.1% sensitivity change with dose per pulse in the range 0.09-2mGy (covering all flattened and unflattened applications). Measured dose profiles are in agreement with MatriXX for fields larger than 22cm{sup 2}, in which case the linear array offers a much better characterization of the penumbra region. Down to 11cm{sup 2}, measured profiles are in very good agreement with the flat panel. Conclusion: The array represents a valuable tool for the characterization of treatment fields in which high spatial resolution is required, together with the dosimetric performance of air vented ionization chambers. Such a technology would be particularly valuable in association with advanced treatment modalities such as rotational radiotherapy, stereotactic treatments (even with unflattened beam qualities) and proton therapy, due to the insensitivity of the chambers on dose per pulse. In the future, a two dimensional prototype based on this technology will be developed and tested. This research project has been supported by a Marie Curie Early Initial Training Network Fellowship of the European Community's Seventh Framework Programme under contract number (PITN-GA-2011-289198-.

  5. Benefit of Adjuvant Brachytherapy Versus External Beam Radiation for Early Breast Cancer: Impact of Patient Stratification on Breast Preservation

    SciTech Connect (OSTI)

    Smith, Grace L.; Jiang, Jing; Buchholz, Thomas A.; Xu, Ying; Hoffman, Karen E.; Giordano, Sharon H.; Hunt, Kelly K.; Smith, Benjamin D.

    2014-02-01

    Purpose: Brachytherapy after lumpectomy is an increasingly popular breast cancer treatment, but data concerning its effectiveness are conflicting. Recently proposed suitability criteria guiding patient selection for brachytherapy have never been empirically validated. Methods: Using the Surveillance, Epidemiology, and End ResultsMedicare linked database, we compared women aged 66 years or older with invasive breast cancer (n=28,718) or ductal carcinoma in situ (n=7229) diagnosed from 2002 to 2007, treated with lumpectomy alone, brachytherapy, or external beam radiation therapy (EBRT). The likelihood of breast preservation, measured by subsequent mastectomy risk, was compared by use of multivariate proportional hazards, further stratified by American Society for Radiation Oncology (ASTRO) brachytherapy suitability groups. We compared 1-year postoperative complications using the ?{sup 2} test and 5-year local toxicities using the log-rank test. Results: For patients with invasive cancer, the 5-year subsequent mastectomy risk was 4.7% after lumpectomy alone (95% confidence interval [CI], 4.1%-5.4%), 2.8% after brachytherapy (95% CI, 1.8%-4.3%), and 1.3% after EBRT (95% CI, 1.1%-1.5%) (P<.001). Compared with lumpectomy alone, brachytherapy achieved a more modest reduction in adjusted risk (hazard ratio [HR], 0.61; 95% CI, 0.40-0.94) than achieved with EBRT (HR, 0.22; 95% CI, 0.18-0.28). Relative risks did not differ when stratified by ASTRO suitability group (P=.84 for interaction), although ASTRO suitable patients did show a low absolute subsequent mastectomy risk, with a minimal absolute difference in risk after brachytherapy (1.6%; 95% CI, 0.7%-3.5%) versus EBRT (0.8%; 95% CI, 0.6%-1.1%). For patients with ductal carcinoma in situ, EBRT maintained a reduced risk of subsequent mastectomy (HR, 0.40; 95% CI, 0.28-0.55; P<.001), whereas the small number of patients treated with brachytherapy (n=179) precluded definitive comparison with lumpectomy alone. In all patients, brachytherapy showed a higher postoperative infection risk (16.5% vs 9.9% after lumpectomy alone vs 11.4% after EBRT, P<.001); higher incidence of breast pain (22.9% vs 11.2% vs 16.7%, P<.001); and higher incidence of fat necrosis (15.3% vs 5.3% vs 7.7%, P<.001). Conclusions: In this study era, brachytherapy showed lesser breast preservation benefit compared with EBRT. Suitability criteria predicted differential absolute, but not relative, benefit in patients with invasive cancer.

  6. Superficial dosimetry imaging based on Čerenkov emission for external beam radiotherapy with megavoltage x-ray beam

    SciTech Connect (OSTI)

    Zhang, Rongxiao; Glaser, Adam K.; Gladstone, David J.; Fox, Colleen J.; Pogue, Brian W.; Norris Cotton Cancer Center, Dartmouth-Hitchcock Medical Center, Lebanon, New Hampshire 03766; Thayer School of Engineering, Dartmouth College, Hanover, New Hampshire 03755

    2013-10-15

    Purpose: Čerenkov radiation emission occurs in all tissue, when charged particles (either primary or secondary) travel at velocity above the threshold for the Čerenkov effect (about 220 KeV in tissue for electrons). This study presents the first examination of optical Čerenkov emission as a surrogate for the absorbed superficial dose for MV x-ray beams.Methods: In this study, Monte Carlo simulations of flat and curved surfaces were studied to analyze the energy spectra of charged particles produced in different regions near the surfaces when irradiated by MV x-ray beams. Čerenkov emission intensity and radiation dose were directly simulated in voxelized flat and cylindrical phantoms. The sampling region of superficial dosimetry based on Čerenkov radiation was simulated in layered skin models. Angular distributions of optical emission from the surfaces were investigated. Tissue mimicking phantoms with flat and curved surfaces were imaged with a time domain gating system. The beam field sizes (50 × 50–200 × 200 mm{sup 2}), incident angles (0°–70°) and imaging regions were all varied.Results: The entrance or exit region of the tissue has nearly homogeneous energy spectra across the beam, such that their Čerenkov emission is proportional to dose. Directly simulated local intensity of Čerenkov and radiation dose in voxelized flat and cylindrical phantoms further validate that this signal is proportional to radiation dose with absolute average discrepancy within 2%, and the largest within 5% typically at the beam edges. The effective sampling depth could be tuned from near 0 up to 6 mm by spectral filtering. The angular profiles near the theoretical Lambertian emission distribution for a perfect diffusive medium, suggesting that angular correction of Čerenkov images may not be required even for curved surface. The acquisition speed and signal to noise ratio of the time domain gating system were investigated for different acquisition procedures, and the results show there is good potential for real-time superficial dose monitoring. Dose imaging under normal ambient room lighting was validated, using gated detection and a breast phantom.Conclusions: This study indicates that Čerenkov emission imaging might provide a valuable way to superficial dosimetry imaging in real time for external beam radiotherapy with megavoltage x-ray beams.

  7. Donor impurity states and related terahertz range nonlinear optical response in GaN cylindrical quantum wires: Effects of external electric and magnetic fields

    SciTech Connect (OSTI)

    Correa, J. D.; Mora-Ramos, M. E.; Duque, C. A.

    2014-06-07

    We report a study on the optical absorption coefficient associated to hydrogenic impurity interstate transitions in zinc-blende GaN quantum wires of cylindrical shape taking into account the effects of externally applied static electric and magnetic fields. The electron states emerge within the effective mass approximation, via the exact diagonalization of the donor-impurity Hamiltonian with parabolic confinement and external field effects. The nonlinear optical absorption is calculated using a recently derived expression for the dielectric susceptibility, obtained via a nonperturbative solution of the density-matrix Bloch equation. Our results show that this treatment eliminates not only the intensity-dependent bleaching effect but also the change in sign of the nonlinear contribution due to the combined effect of asymmetric impurity location and the applied electric field.

  8. The effect of external magnetic field on the bremsstrahlung nonlinear absorption mechanism in the interaction of high intensity short laser pulse with collisional underdense plasma

    SciTech Connect (OSTI)

    Sedaghat, M.; Ettehadi-Abari, M.; Shokri, B. Ghorbanalilu, M.

    2015-03-15

    Laser absorption in the interaction between ultra-intense femtosecond laser and solid density plasma is studied theoretically here in the intensity range I?{sup 2}?10{sup 14}?10{sup 16}Wcm{sup ?2}?m{sup 2}. The collisional effect is found to be significant when the incident laser intensity is less than 10{sup 16}Wcm{sup ?2}?m{sup 2}. In the current work, the propagation of a high frequency electromagnetic wave, for underdense collisional plasma in the presence of an external magnetic field is investigated. It is shown that, by considering the effect of the ponderomotive force in collisional magnetized plasmas, the increase of laser pulse intensity leads to steepening of the electron density profile and the electron bunches of plasma makes narrower. Moreover, it is found that the wavelength of electric and magnetic fields oscillations increases by increasing the external magnetic field and the density distribution of electrons also grows in comparison with the unmagnetized collisional plasma. Furthermore, the spatial damping rate of laser energy and the nonlinear bremsstrahlung absorption coefficient are obtained in the collisional regime of magnetized plasma. The other remarkable result is that by increasing the external magnetic field in this case, the absorption coefficient increases strongly.

  9. Monte Carlo study for designing a dedicated D-shaped collimator used in the external beam radiotherapy of retinoblastoma patients

    SciTech Connect (OSTI)

    Mayorga, P. A.; Departamento de Fsica Atmica, Molecular y Nuclear, Universidad de Granada, E-18071 Granada ; Brualla, L.; Sauerwein, W.; Lallena, A. M.

    2014-01-15

    Purpose: Retinoblastoma is the most common intraocular malignancy in the early childhood. Patients treated with external beam radiotherapy respond very well to the treatment. However, owing to the genotype of children suffering hereditary retinoblastoma, the risk of secondary radio-induced malignancies is high. The University Hospital of Essen has successfully treated these patients on a daily basis during nearly 30 years using a dedicated D-shaped collimator. The use of this collimator that delivers a highly conformed small radiation field, gives very good results in the control of the primary tumor as well as in preserving visual function, while it avoids the devastating side effects of deformation of midface bones. The purpose of the present paper is to propose a modified version of the D-shaped collimator that reduces even further the irradiation field with the scope to reduce as well the risk of radio-induced secondary malignancies. Concurrently, the new dedicated D-shaped collimator must be easier to build and at the same time produces dose distributions that only differ on the field size with respect to the dose distributions obtained by the current collimator in use. The scope of the former requirement is to facilitate the employment of the authors' irradiation technique both at the authors' and at other hospitals. The fulfillment of the latter allows the authors to continue using the clinical experience gained in more than 30 years. Methods: The Monte Carlo codePENELOPE was used to study the effect that the different structural elements of the dedicated D-shaped collimator have on the absorbed dose distribution. To perform this study, the radiation transport through a Varian Clinac 2100 C/D operating at 6 MV was simulated in order to tally phase-space files which were then used as radiation sources to simulate the considered collimators and the subsequent dose distributions. With the knowledge gained in that study, a new, simpler, D-shaped collimator is proposed. Results: The proposed collimator delivers a dose distribution which is 2.4 cm wide along the inferior-superior direction of the eyeball. This width is 0.3 cm narrower than that of the dose distribution obtained with the collimator currently in clinical use. The other relevant characteristics of the dose distribution obtained with the new collimator, namely, depth doses at clinically relevant positions, penumbrae width, and shape of the lateral profiles, are statistically compatible with the results obtained for the collimator currently in use. Conclusions: The smaller field size delivered by the proposed collimator still fully covers the planning target volume with at least 95% of the maximum dose at a depth of 2 cm and provides a safety margin of 0.2 cm, so ensuring an adequate treatment while reducing the irradiated volume.

  10. Second cancer incidence risk estimates using BEIR VII models for standard and complex external beam radiotherapy for early breast cancer

    SciTech Connect (OSTI)

    Donovan, E. M.; James, H.; Bonora, M.; Yarnold, J. R.; Evans, P. M.

    2012-10-15

    Purpose: To compare organ specific cancer incidence risks for standard and complex external beam radiotherapy (including cone beam CT verification) following breast conservation surgery for early breast cancer.Method: Doses from breast radiotherapy and kilovoltage cone beam CT (CBCT) exposures were obtained from thermoluminescent dosimeter measurements in an anthropomorphic phantom in which the positions of radiosensitive organs were delineated. Five treatment deliveries were investigated: (i) conventional tangential field whole breast radiotherapy (WBRT), (ii) noncoplanar conformal delivery applicable to accelerated partial beast irradiation (APBI), (iii) two-volume simultaneous integrated boost (SIB) treatment, (iv) forward planned three-volume SIB, and (v) inverse-planned three volume SIB. Conformal and intensity modulated radiotherapy methods were used to plan the complex treatments. Techniques spanned the range from simple methods appropriate for patient cohorts with a low cancer recurrence risk to complex plans relevant to cohorts with high recurrence risk. Delineated organs at risk included brain, salivary glands, thyroid, contralateral breast, left and right lung, esophagus, stomach, liver, colon, and bladder. Biological Effects of Ionizing Radiation (BEIR) VII cancer incidence models were applied to the measured mean organ doses to determine lifetime attributable risk (LAR) for ages at exposure from 35 to 80 yr according to radiotherapy techniques, and included dose from the CBCT imaging. Results: All LAR decreased with age at exposure and were lowest for brain, thyroid, liver, and bladder (<0.1%). There was little dependence of LAR on radiotherapy technique for these organs and for colon and stomach. LAR values for the lungs for the three SIB techniques were two to three times those from WBRT and APBI. Uncertainties in the LAR models outweigh any differences in lung LAR between the SIB methods. Constraints in the planning of the SIB methods ensured that contralateral breast doses and LAR were comparable to WBRT, despite their added complexity. The smaller irradiated volume of the ABPI plan contributed to a halving of LAR for contralateral breast compared with the other plan types. Daily image guided radiotherapy (IGRT) for a left breast protocol using kilovoltage CBCT contributed <10% to LAR for the majority of organs, and did not exceed 22% of total organ dose. Conclusions: Phantom measurements and calculations of LAR from the BEIR VII models predict that complex breast radiotherapy techniques do not increase the theoretical risk of second cancer incidence for organs distant from the treated breast, or the contralateral breast where appropriate plan constraints are applied. Complex SIB treatments are predicted to increase the risk of second cancer incidence in the lungs compared to standard whole breast radiotherapy; this is outweighed by the threefold reduction in 5 yr local recurrence risk for patients of high risk of recurrence, and young age, from the use of radiotherapy. APBI may have a favorable impact on risk of second cancer in the contralateral breast and lung for older patients at low risk of recurrence. Intensive use of IGRTincreased the estimated values of LAR but these are dominated by the effect of the dose from the radiotherapy, and any increase in LAR from IGRT is much lower than the models' uncertainties.

  11. L-Boronophenylalanine-Mediated Boron Neutron Capture Therapy for Malignant Glioma Progressing After External Beam Radiation Therapy: A Phase I Study

    SciTech Connect (OSTI)

    Kankaanranta, Leena; Seppaelae, Tiina; Koivunoro, Hanna; Vaelimaeki, Petteri; Beule, Annette; Collan, Juhani; Kortesniemi, Mika; Uusi-Simola, Jouni; Kotiluoto, Petri; Auterinen, Iiro; Seren, Tom; Paetau, Anders; Saarilahti, Kauko; Savolainen, Sauli; Joensuu, Heikki

    2011-06-01

    Purpose: To investigate the safety of boronophenylalanine-mediated boron neutron capture therapy (BNCT) in the treatment of malignant gliomas that progress after surgery and conventional external beam radiation therapy. Methods and Materials: Adult patients who had histologically confirmed malignant glioma that had progressed after surgery and external beam radiotherapy were eligible for this Phase I study, provided that >6 months had elapsed from the last date of radiation therapy. The first 10 patients received a fixed dose, 290 mg/kg, of L-boronophenylalanine-fructose (L-BPA-F) as a 2-hour infusion before neutron irradiation, and the remaining patients were treated with escalating doses of L-BPA-F, either 350 mg/kg, 400 mg/kg, or 450 mg/kg, using 3 patients on each dose level. Adverse effects were assessed using National Cancer Institute Common Toxicity Criteria version 2.0. Results: Twenty-two patients entered the study. Twenty subjects had glioblastoma, and 2 patients had anaplastic astrocytoma, and the median cumulative dose of prior external beam radiotherapy was 59.4 Gy. The maximally tolerated L-BPA-F dose was reached at the 450 mg/kg level, where 4 of 6 patients treated had a grade 3 adverse event. Patients who were given >290 mg/kg of L-BPA-F received a higher estimated average planning target volume dose than those who received 290 mg/kg (median, 36 vs. 31 Gy [W, i.e., a weighted dose]; p = 0.018). The median survival time following BNCT was 7 months. Conclusions: BNCT administered with an L-BPA-F dose of up to 400 mg/kg as a 2-hour infusion is feasible in the treatment of malignant gliomas that recur after conventional radiation therapy.

  12. Self-organised aggregation of a pair of particles with different resonant frequencies and electric dipole moments of transitions, controlled by an external quasi-resonant field

    SciTech Connect (OSTI)

    Slabko, V V; Tsipotan, A S; Aleksandrovsky, A S

    2013-05-31

    The influence of the oscillation phases of the dipole moments induced in metal nanoparticles and quantum dots by an external laser field on their interaction energy is considered. It is shown that a difference in resonant frequencies leads to the formation of additional minima and maxima, which are absent in the spectral dependence of the interaction energy of identical particles at similar orientations of the pair of particles with respect to the plane of polarisation of radiation. These features are due to the fact that the oscillation phase difference of the induced dipole moments of particles reaches values close to {pi}. (interaction of laser radiation with matter. laser plasma)

  13. Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards & Labeling Programs for Copy Machines, External Power Supplies, LED Displays, Residential Gas Cooktops and Televisions

    SciTech Connect (OSTI)

    Zheng, Nina; Zhou, Nan; Fridley, David

    2012-03-01

    This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.

  14. Electronic and magnetic properties of armchair MoS{sub 2} nanoribbons under both external strain and electric field, studied by first principles calculations

    SciTech Connect (OSTI)

    Hu, Ting; Dong, Jinming; Zhou, Jian; Kawazoe, Yoshiyuki

    2014-08-14

    The electronic and magnetic properties of armchair edge MoS{sub 2} nanoribbons (MoS{sub 2}-ANRs) underboth the external strain and transverse electric field (E{sub t}) have been systematically investigated by using the first-principles calculations. It is found that: (1) If no electric field is applied, an interesting structural phase transition would appear under a large tensile strain, leading to a new phase MoS{sub 2}-A'NR, and inducing a big jump peak of the band gap in the transition region. But, the band gap response to compressive strains is much different from that to tensile strain, showing no the structural phase transition. (2) Under the small tensile strains (<10%), the combined E{sub t} and tensile strain give rise to a positive superposition (resonant) effect on the band gap reduction at low E{sub t} (<3 V/nm), and oppositely a negative superposition (antiresonant) one at high E{sub t} (>4 V/nm). On the other hand, the external compressive strains have always presented the resonant effect on the band gap reduction, induced by the electric field. (3) After the structural phase transition, an external large tensile strain could greatly reduce the critical field E{sub tc} causing the band gap closure, and make the system become a ferromagnetic (FM) metal at a relative low E{sub t} (e.g., <4 V/nm), which is very helpful for its promising applications in nano-mechanical spintronics devices. (4) At high E{sub t} (>10 V/nm), the magnetic moments of both the MoS{sub 2}-ANR and MoS{sub 2}-A'NR in their FM states could be enhanced greatly by a tensile strain. Our numerical results of effectively tuning physical properties of MoS{sub 2}-ANRs by combined external strain and electric field may open their new potential applications in nanoelectronics and spintronics.

  15. Charge trapping and de-trapping in isolated CdSe/ZnS nanocrystals under an external electric field: Indirect evidence for a permanent dipole moment

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Zang, Huidong; Cristea, Mihail; Shen, Xuan; Liu, Mingzhao; Camino, Fernando; Cotlet, Mircea

    2015-08-05

    Single nanoparticle studies of charge trapping and de-trapping in core/shell CdSe/ZnS nanocrystals incorporated into an insulating matrix and subjected to an external electric field demonstrate the ability to reversibly modulate the exciton dynamics and photoluminescence blinking while providing indirect evidence for the existence of a permanent ground state dipole moment in such nanocrystals. A model assuming the presence of energetically deep charge traps physically aligned along the direction of the permanent dipole is proposed in order to explain the dynamics of nanocrystal blinking in the presence of a permanent dipole moment.

  16. Hanford ETR Tank Waste Treatment and Immobilization Plant - Hanford Tank Waste Treatment and Immobilization Plant Technical Review - External Flowsheet Review Team (Technical) Report

    Office of Environmental Management (EM)

    CCN: 132846 Office of River Protection Mr. R. J. Schepens MAR 1 7 2006 Manager P.O. Box 450, MSIN H6-60 Richland, Washington 99352 Dear Mr. Schepens: CONTRACT NO. DE-AC27-01RV14136 - REPORT OF EXTERNAL FLOWSHEET REVIEW TEAM FOR THE HANFORD TANK WASTE TREATMENT AND IMMOBILIZATION PLANT - FINAL REPORT TITLED: "COMPREHENSIVE REVIEW OF THE HANFORD WASTE TREATMENT PLANT FLOWSHEET AND THROUGHPUT" On behalf of Tom Hash, Chairman of the Board of Bechtel National, Inc. the report of the

  17. Union, Maine: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    in Knox County, Maine.1 References US Census Bureau Incorporated place and minor civil division population dataset (All States, all geography) Retrieved from "http:...

  18. Union Training Future Electricians in Solar Power

    Broader source: Energy.gov [DOE]

    Electricians in Indiana believe solar power is the future, and they are preparing for it. The International Brotherhood of Electrical Workers Local 725 (IBEW 725) in Terre Haute, Ind., purchased 60 solar panels and plans to train its members in solar installation.

  19. Professional Division Laborers' International Union of North...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    LOCAL 335 PDL BANNER Welcome Representing the professional employees of the Bonneville Power Administration Ball Image What is PDL? Ball Image PDL History Ball Image...

  20. Effusive molecular beam-sampled Knudsen flow reactor coupled to vacuum ultraviolet single photon ionization mass spectrometry using an external free radical source

    SciTech Connect (OSTI)

    Leplat, N.; Rossi, M. J.

    2013-11-15

    A new apparatus using vacuum ultraviolet single photon ionization mass spectrometry (VUV SPIMS) of an effusive molecular beam emanating from a Knudsen flow reactor is described. It was designed to study free radical-molecule kinetics over a significant temperature range (300630 K). Its salient features are: (1) external free radical source, (2) counterpropagating molecular beam and diffuse VUV photon beam meeting in a crossed-beam ion source of a quadrupole mass spectrometer with perpendicular ion extraction, (3) analog detection of the photocurrent of the free radical molecular cation, and (4) possibility of detecting both free radicals and closed shell species in the same apparatus and under identical reaction conditions owing to the presence of photoelectrons generated by the photoelectric effect of the used VUV-photons. The measured thermal molecular beam-to-background ratio was 6.35 0.39 for Ar and 10.86 1.59 for i-C{sub 4}H{sub 10} at 300 K, a factor of 2.52 and 1.50 smaller, respectively, than predicted from basic gas-dynamic considerations. Operating parameters as well as the performance of key elements of the instrument are presented and discussed. Coupled to an external free radical source a steady-state specific exit flow of 1.6 10{sup 11} and 5.0 10{sup 11} molecule s{sup ?1} cm{sup ?3} of C{sub 2}H{sub 5}{sup } (ethyl) and t-C{sub 4}H{sub 9}{sup } (t-butyl) free radicals have been detected using VUV SPIMS at their molecular ion m/z 29 and 57, respectively, at 300 K.

  1. The role of integrated resource planning, environmental externalities, and anticipation of future regulation in compliance planning under the Clean Air Act Amendments of 1990

    SciTech Connect (OSTI)

    Bernow, S.; Biewald, B.; Wulfsberg, K.

    1993-07-01

    Utilities are developing sulfur dioxide (SO{sub 2}) emission compliance plans to meet limitations of the Clean Air Act Amendments of 1990 (CAAA). Compliance plans will have long-term effects on resource selection, fuel choice, and system dispatch. Use of integrated resource planning (IRP) is necessary to ensure compliance plans are consistent with the overall societal goals. In particular, environmental externalities must be integrated with the compliance planning process. The focus of the CAAA is on air pollution reduction, specifically acid gases and toxics, and attainment of National Ambient Air Quality Standards (NAAQS) for criteria pollutants. Title IV specifically focuses on sulfur dioxide with a national allowance trading system, while further regulation of toxics and nitrogen oxides is slated for additional study. Yet, compliance planning based narrowly upon today`s environmental regulations could fail to meet the broad goals of IRP if a larger array of environmental externalities is excluded from the analysis. Compliance planning must consider a broad range of environmental effects from energy production and use to (1) protect society`s long-term stake in environmental quality, and (2) ensure that today`s plans are rich enough to accommodate potential changes in regulation and national environmental goals. The explicit recognition of environmental effects, such as those associated with CO{sub 2} release, will result in prudent compliance plans that take advantage of current opportunities for pollution avoidance and have long-term viability in the face of regulatory change. By including such considerations, the mix of resources acquired and operated (supply and demand, existing and new, conventional and renewable, fuel type and fuel quality, pollution control, and dispatch protocols) will be robust and truly least-cost.

  2. An experimental study of external reactor vessel cooling strategy on the critical heat flux using the graphene oxide nano-fluid

    SciTech Connect (OSTI)

    Park, S. D.; Lee, S. W.; Kang, S.; Kim, S. M.; Seo, H.; Bang, I. C.

    2012-07-01

    External reactor vessel cooling (ERVC) for in-vessel retention (IVR) of corium as a key severe accident management strategy can be achieved by flooding the reactor cavity during a severe accident. In this accident mitigation strategy, the decay heat removal capability depends on whether the imposed heat flux exceeds critical heat flux (CHF). To provide sufficient cooling for high-power reactors such as APR1400, there have been some R and D efforts to use the reactor vessel with micro-porous coating and nano-fluids boiling-induced coating. The dispersion stability of graphene-oxide nano-fluid in the chemical conditions of flooding water that includes boric acid, lithium hydroxide (LiOH) and tri-sodium phosphate (TSP) was checked in terms of surface charge or zeta potential before the CHF experiments. Results showed that graphene-oxide nano-fluids were very stable under ERVC environment. The critical heat flux (CHF) on the reactor vessel external wall was measured using the small scale two-dimensional slide test section. The radius of the curvature is 0.1 m. The dimension of each part in the facility simulated the APR-1400. The heater was designed to produce the different heat flux. The magnitude of heat flux follows the one of the APR-1400 when the severe accident occurred. All tests were conducted under inlet subcooling 10 K. Graphene-oxide nano-fluids (concentration: 10 -4 V%) enhanced CHF limits up to about 20% at mass flux 50 kg/m{sup 2}s and 100 kg/m{sup 2}s in comparison with the results of the distilled water at same test condition. (authors)

  3. Can We Predict Plan Quality for External Beam Partial Breast Irradiation: Results of a Multicenter Feasibility Study (Trans Tasman Radiation Oncology Group Study 06.02)

    SciTech Connect (OSTI)

    Kron, Tomas; Willis, David; Link, Emma; Lehman, Margot; Campbell, Gillian; O'Brien, Peter; Chua, Boon

    2013-11-15

    Purpose: Partial breast irradiation (PBI) after lumpectomy may be an option for selected patients with early breast cancer. A feasibility study of accelerated PBI delivered using external beam 3-dimensional conformal radiation therapy (RT) was undertaken at 8 Australasian centers. The present study evaluated the impact of patient, tumor, and RT technique-related factors on the quality of RT plans as determined by the dosevolume parameters of organs at risk. Methods and Materials: Forty-eight patients were enrolled in the study. All RT plans were centrally reviewed using predefined dosimetric criteria before commencement and after completion of protocol therapy. The RT plans of 47 patients met the dosevolume constraints, and all 47 patients received PBI to a prescribed dose of 38.5 Gy in 10 fractions. The RT plan quality was determined by volumes of the ipsilateral whole breast, lung, and heart that received 50% and 95%; 30%; and 5% of the prescribed dose, respectively. Patient, tumor, and RT technique-related factors were investigated for association with the parameters of RT plan quality. Results: The ratio of the planning target volume to the ipsilateral whole-breast volume was significantly associated with the ipsilateral breast doses on multiple variable analyses. The distance of the postlumpectomy surgical cavity from the heart and lung were predictive for heart and lung doses, respectively. A distance between surgical cavity and heart of >4 cm typically resulted in <1% of the heart volume receiving 5 Gy or less. It was more difficult to meet the heart dose constraint for left-sided and medially located tumors. Conclusions: Partial breast irradiation using 3-dimensional conformal RT was feasible within the study constraints. The ratio of planning target volume to ipsilateral whole-breast volume and the distance of surgical cavity from the heart were significant predictors of the quality of treatment plan for external beam PBI.

  4. Characterization of a swept external...

    Office of Scientific and Technical Information (OSTI)

    2015; published 21 Sep 2015 5 Oct 2015 | Vol. 23, No. 20 | DOI:10.1364OE.23.025553 | OPTICS EXPRESS 25553 10. A. Mukherjee, I. Dunayevskiy, M. Prasanna, R. Go, A. Tsekoun, X....

  5. A two-dimensional model for the heat transfer on the external circuit of a Stirling engine for a dish/Stirling system

    SciTech Connect (OSTI)

    Makhkamov, K.K.; Ingham, D.B.

    1998-07-01

    In this paper the {kappa}-{var{underscore}epsilon} turbulent model for the incompressible fluid flow has been used to describe the heat transfer and gas dynamical processes on the external circuit of a Stirling Engine as used on a Solar Dish/Stirling System. The problem considered, in this work for a cavity-type heat receiver of the Stirling Engine, is that of the heat transfer in the body of the shell of the heat exchangers of the engine due to the thermal conductivity, the convective heat transfer between the working fluid and the walls of the engine internal gas circuit and the heat transfer due to the forced convection of the air in the cavity and in the attached air domain. The boundary conditions employed on the engines internal circuit were obtained using the developed one-dimensional second level mathematical model of the engine working cycle. Physical models for the distribution of the solar insolation on the bottom and side walls of the heat receiver have been taken into account and the temperature fields for the heat receiver and the air velocity have been obtained for the case when the heat receiver is affected by wind. The numerical results show that it is in the region of the boundary of the input window of the heat receiver where there is the largest reduction in the temperature in the shell of the heat exchangers and this is due to the convection of the air.

  6. Stabilization of in-tank residual wastes and external-tank soil contamination for the tank focus area, Hanford tank initiative: Applications to the AX Tank Farm

    SciTech Connect (OSTI)

    Balsley, S.D.; Krumhansl, J.L.; Borns, D.J.; McKeen, R.G.

    1998-07-01

    A combined engineering and geochemistry approach is recommended for the stabilization of waste in decommissioned tanks and contaminated soils at the AX Tank Farm, Hanford, WA. A two-part strategy of desiccation and gettering is proposed for treatment of the in-tank residual wastes. Dry portland cement and/or fly ash are suggested as an effective and low-cost desiccant for wicking excess moisture from the upper waste layer. Getters work by either ion exchange or phase precipitation to reduce radionuclide concentrations in solution. The authors recommend the use of specific natural and man-made compounds, appropriately proportioned to the unique inventory of each tank. A filler design consisting of multilayered cementitous grout with interlayered sealant horizons should serve to maintain tank integrity and minimize fluid transport to the residual waste form. External tank soil contamination is best mitigated by placement of grouted skirts under and around each tank, together with installation of a cone-shaped permeable reactive barrier beneath the entire tank farm. Actinide release rates are calculated from four tank closure scenarios ranging from no action to a comprehensive stabilization treatment plan (desiccant/getters/grouting/RCRA cap). Although preliminary, these calculations indicate significant reductions in the potential for actinide transport as compared to the no-treatment option.

  7. ARM - Events Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NOAA-AGU Fellow Dr. Ruby Leung, Pacific Northwest National Laboratory-AGU Fellow Dr. Kuo-Nan Liou, University of California, Los Angeles-AGU Roger Revelle Medal Dr. Warren...

  8. NRC Job Code V6060: Extended in-situ and real time monitoring. Task 4: Detection and monitoring of leaks at nuclear power plants external to structures

    SciTech Connect (OSTI)

    Sheen, S. H.

    2012-08-01

    In support of Task 4 of the NRC study on compliance with 10 CFR part 20.1406, minimization of contamination, Argonne National Laboratory (ANL) conducted a one-year scoping study, in concert with a parallel study performed by NRC/NRR staff, on monitoring for leaks at nuclear power plants (NPPs) external to structures. The objective of this task-4 study is to identify and assess those sensors and monitoring techniques for early detection of abnormal radioactive releases from the engineered facility structures, systems and components (SSCs) to the surrounding underground environment in existing NPPs and planned new reactors. As such, methods of interest include: (1) detection of anomalous water content of soils surrounding SSCs, (2) radionuclides contained in the leaking water, and (3) secondary signals such as temperature. ANL work scope includes mainly to (1) identify, in concert with the nuclear industry, the sensors and techniques that have most promise to detect radionuclides and/or associated chemical releases from SSCs of existing NPPs and (2) review and provide comments on the results of the NRC/NRR staff scoping study to identify candidate technologies. This report constitutes the ANL deliverable of the task-4 study. It covers a survey of sensor technologies and leak detection methods currently applied to leak monitoring at NPPs. The survey also provides a technology evaluation that identifies their strength and deficiency based on their detection speed, sensitivity, range and reliability. Emerging advanced technologies that are potentially capable of locating releases, identifying the radionuclides, and estimating their concentrations and distributions are also included in the report along with suggestions of required further research and development.

  9. Prognostic Importance of Gleason 7 Disease Among Patients Treated With External Beam Radiation Therapy for Prostate Cancer: Results of a Detailed Biopsy Core Analysis

    SciTech Connect (OSTI)

    Spratt, Daniel E.; Zumsteg, Zach; Ghadjar, Pirus; Pangasa, Misha; Pei, Xin; Fine, Samson W.; Yamada, Yoshiya; Kollmeier, Marisa; Zelefsky, Michael J.

    2013-04-01

    Purpose: To analyze the effect of primary Gleason (pG) grade among a large cohort of Gleason 7 prostate cancer patients treated with external beam radiation therapy (EBRT). Methods and Materials: From May 1989 to January 2011, 1190 Gleason 7 patients with localized prostate cancer were treated with EBRT at a single institution. Of these patients, 613 had a Gleason 7 with a minimum of a sextant biopsy with nonfragmented cores and full biopsy core details available, including number of cores of cancer involved, percentage individual core involvement, location of disease, bilaterality, and presence of perineural invasion. Median follow-up was 6 years (range, 1-16 years). The prognostic implication for the following outcomes was analyzed: biochemical recurrence-free survival (bRFS), distant metastasis-free survival (DMFS), and prostate cancer-specific mortality (PCSM). Results: The 8-year bRFS rate for pG3 versus pG4 was 77.6% versus 61.3% (P<.0001), DMFS was 96.8% versus 84.3% (P<.0001), and PCSM was 3.7% versus 8.1% (P=.002). On multivariate analysis, pG4 predicted for significantly worse outcome in all parameters. Location of disease (apex, base, mid-gland), perineural involvement, maximum individual core involvement, and the number of Gleason 3+3, 3+4, or 4+3 cores did not predict for distant metastases. Conclusions: Primary Gleason grade 4 independently predicts for worse bRFS, DMFS, and PCSM among Gleason 7 patients. Using complete core information can allow clinicians to utilize pG grade as a prognostic factor, despite not having the full pathologic details from a prostatectomy specimen. Future staging and risk grouping should investigate the incorporation of primary Gleason grade when complete biopsy core information is used.

  10. Application of External-Cavity Quantum Cascade Infrared Lasers to Nanosecond Time-Resolved Infrared Spectroscopy of Condensed-Phase Samples Following Pulse Radiolysis

    SciTech Connect (OSTI)

    Grills, D.C.; Cook, A.R.; Fujita, E.; George, M.W.; Miller, J.R.; Preses, J.M.; Wishart, J.F.

    2010-06-01

    Pulse radiolysis, utilizing short pulses of high-energy electrons from accelerators, is a powerful method for rapidly generating reduced or oxidized species and other free radicals in solution. Combined with fast time-resolved spectroscopic detection (typically in the ultraviolet/visible/near-infrared), it is invaluable for monitoring the reactivity of species subjected to radiolysis on timescales ranging from picoseconds to seconds. However, it is often difficult to identify the transient intermediates definitively due to a lack of structural information in the spectral bands. Time-resolved vibrational spectroscopy offers the structural specificity necessary for mechanistic investigations but has received only limited application in pulse radiolysis experiments. For example, time-resolved infrared (TRIR) spectroscopy has only been applied to a handful of gas-phase studies, limited mainly by several technical challenges. We have exploited recent developments in commercial external-cavity quantum cascade laser (EC-QCL) technology to construct a nanosecond TRIR apparatus that has allowed, for the first time, TRIR spectra to be recorded following pulse radiolysis of condensed-phase samples. Near single-shot sensitivity of DeltaOD <1 x 10(-3) has been achieved, with a response time of <20 ns. Using two continuous-wave EC-QCLs, the current apparatus covers a probe region from 1890-2084 cm(-1), and TRIR spectra are acquired on a point-by-point basis by recording transient absorption decay traces at specific IR wavelengths and combining these to generate spectral time slices. The utility of the apparatus has been demonstrated by monitoring the formation and decay of the one-electron reduced form of the CO(2) reduction catalyst, [Re(I)(bpy)(CO)(3)(CH(3)CN)](+), in acetonitrile with nanosecond time resolution following pulse radiolysis. Characteristic red-shifting of the nu(CO) IR bands confirmed that one-electron reduction of the complex took place. The availability of TRIR detection with high sensitivity opens up a wide range of mechanistic pulse radiolysis investigations that were previously difficult or impossible to perform with transient UV/visible detection.

  11. Direct 2-Arm Comparison Shows Benefit of High-Dose-Rate Brachytherapy Boost vs External Beam Radiation Therapy Alone for Prostate Cancer

    SciTech Connect (OSTI)

    Khor, Richard; Duchesne, Gillian; Monash University, Melbourne ; Tai, Keen-Hun; Foroudi, Farshad; Chander, Sarat; Van Dyk, Sylvia; Garth, Margaret; Williams, Scott

    2013-03-01

    Purpose: To evaluate the outcomes of patients treated for intermediate- and high-risk prostate cancer with a single schedule of either external beam radiation therapy (EBRT) and high-dose-rate brachytherapy (HDRB) boost or EBRT alone. Methods and Materials: From 2001-2006, 344 patients received EBRT with HDRB boost for definitive treatment of intermediate- or high-risk prostate cancer. The prescribed EBRT dose was 46 Gy in 23 fractions, with a HDR boost of 19.5 Gy in 3 fractions. This cohort was compared to a contemporaneously treated cohort who received EBRT to 74 Gy in 37 fractions, using a matched pair analysis. Three-dimensional conformal EBRT was used. Matching was performed using a propensity score matching technique. High-risk patients constituted 41% of the matched cohorts. Five-year clinical and biochemical outcomes were analyzed. Results: Initial significant differences in prognostic indicators between the unmatched treatment cohorts were rendered negligible after matching, providing a total of 688 patients. Median biochemical follow-up was 60.5 months. The 5-year freedom from biochemical failure was 79.8% (95% confidence interval [CI], 74.3%-85.0%) and 70.9% (95% CI, 65.4%-76.0%) for the HDRB and EBRT groups, respectively, equating to a hazard ratio of 0.59 (95% CI, 0.43-0.81, P=.0011). Interaction analyses showed no alteration in HDR efficacy when planned androgen deprivation therapy was administered (P=.95), but a strong trend toward reduced efficacy was shown compared to EBRT in high-risk cases (P=.06). Rates of grade 3 urethral stricture were 0.3% (95% CI, 0%-0.9%) and 11.8% (95% CI, 8.1%-16.5%) for EBRT and HDRB, respectively (P<.0001). No differences in clinical outcomes were observed. Conclusions: This comparison of 2 individual contemporaneously treated HDRB and EBRT approaches showed improved freedom from biochemical progression with the HDR approach. The benefit was more pronounced in intermediate- risk patients but needs to be weighed against an increased risk of urethral toxicity.

  12. Five-Year Outcomes, Cosmesis, and Toxicity With 3-Dimensional Conformal External Beam Radiation Therapy to Deliver Accelerated Partial Breast Irradiation

    SciTech Connect (OSTI)

    Rodrguez, Nria; Sanz, Xavier; Dengra, Josefa; Foro, Palmira; Membrive, Ismael; Reig, Anna; Quera, Jaume; Fernndez-Velilla, Enric; Pera, scar; Lio, Jackson; Lozano, Joan; Algara, Manuel

    2013-12-01

    Purpose: To report the interim results from a study comparing the efficacy, toxicity, and cosmesis of breast-conserving treatment with accelerated partial breast irradiation (APBI) or whole breast irradiation (WBI) using 3-dimensional conformal external beam radiation therapy (3D-CRT). Methods and Materials: 102 patients with early-stage breast cancer who underwent breast-conserving surgery were randomized to receive either WBI (n=51) or APBI (n=51). In the WBI arm, 48 Gy was delivered to the whole breast in daily fractions of 2 Gy, with or without additional 10 Gy to the tumor bed. In the APBI arm, patients received 37.5 Gy in 3.75 Gy per fraction delivered twice daily. Toxicity results were scored according to the Radiation Therapy Oncology Group Common Toxicity Criteria. Skin elasticity was measured using a dedicated device (Multi-Skin-Test-Center MC-750-B2, CKelectronic-GmbH). Cosmetic results were assessed by the physician and the patients as good/excellent, regular, or poor. Results: The median follow-up time was 5 years. No local recurrences were observed. No significant differences in survival rates were found. APBI reduced acute side effects and radiation doses to healthy tissues compared with WBI (P<.01). Late skin toxicity was no worse than grade 2 in either group, without significant differences between the 2 groups. In the ipsilateral breast, the areas that received the highest doses (ie, the boost or quadrant) showed the greatest loss of elasticity. WBI resulted in a greater loss of elasticity in the high-dose area compared with APBI (P<.05). Physician assessment showed that >75% of patients in the APBI arm had excellent or good cosmesis, and these outcomes appear to be stable over time. The percentage of patients with excellent/good cosmetic results was similar in both groups. Conclusions: APBI delivered by 3D-CRT to the tumor bed for a selected group of early-stage breast cancer patients produces 5-year results similar to those achieved with conventional WBI.

  13. Status and Effectiveness of DOE Efforts to Learn from Internal and External Operating Experience in Accordance with Commitment #20 of the DOE Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2004-1

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Safety and Security Report to the Secretary on the Status and Effectiveness of DOE Efforts to Learn from Internal and External Operating Experience in Accordance with Commitment #20 of the DOE Implementation Plan for Defense Nuclear Facilities Safety Board Recommendation 2004-1 February 2011 Office of Health, Safety and Security U.S. Department of Energy Office of Health, Safety and Security HSS Table of Contents 1.0 Introduction

  14. Operation Greenhouse. Scientific Director's report of atomic weapon tests at Eniwetok, 1951. Annex 1. 5. Neutron measurements. Part 2. External neutron- and gamma flux measurements by sample activation. Section 1

    SciTech Connect (OSTI)

    Biggers, W.A.; Brown, L.J.

    1985-09-01

    The Greenhouse operation consisted of a series of four shots conducted at Eniwetok during the Srping of 1951. The external neutron threshold measurements consisted of the use of good samples to measure integrated thermal neutron fluxes and sulfur, iodine, and zirconium samples to measure fluxes of higher-energy neutrons. The iodine also measured high-energy gamma-ray intensity. Measurements were also made on slow- and fast-neutron intensities as a function of time.

  15. Improving the energy response of external beam therapy (EBT) GafChromic{sup TM} dosimetry films at low energies (?100 keV)

    SciTech Connect (OSTI)

    Bekerat, H. Devic, S.; DeBlois, F.; Singh, K.; Sarfehnia, A.; Seuntjens, J.; Shih, Shelley; Yu, Xiang; Lewis, D.

    2014-02-15

    Purpose: Purpose of this work is to investigate the effects of varying the active layer composition of external beam therapy (EBT) GafChromic{sup TM} films on the energy dependence of the film, as well as try to develop a new prototype with more uniform energy response at low photon energies (?100?keV). Methods: First, the overall energy response (S{sub AD,} {sub W}(Q)) of different commercial EBT type film models that represent the three different generations produced to date, i.e., EBT, EBT2, and EBT3, was investigated. Pieces of each film model were irradiated to a fixed dose of 2 Gy to water for a wide range of beam qualities and the corresponding S{sub AD,} {sub W}(Q) was measured using a flatbed document scanner. Furthermore, the DOSRZnrc Monte Carlo code was used to determine the absorbed dose to water energy dependence of the film, f(Q). Moreover, the intrinsic energy dependence, k{sub bq}(Q), for each film model was evaluated using the corresponding S{sub AD,} {sub W}(Q) and f(Q). In the second part of this study, the authors investigated the effects of changing the chemical composition of the active layer on S{sub AD,} {sub W}(Q). Finally, based on these results, the film manufacturer fabricated several film prototypes and the authors evaluated their S{sub AD,} {sub W}(Q). Results: The commercial EBT film model shows an under response at all energies below 100 keV reaching 39% 4% at about 20 keV. The commercial EBT2 and EBT3 film models show an under response of about 27% 4% at 20 keV and an over response of about 16% 4% at 40?keV.S{sub AD,} {sub W}(Q) of the three commercial film models at low energies show strong correlation with the corresponding f{sup ?1}(Q) curves. The commercial EBT3 model with 4% Cl in the active layer shows under response of 22% 4% at 20 keV and 6% 4% at about 40?keV. However, increasing the mass percent of chlorine makes the film more hygroscopic which may affect the stability of the film's readout. The EBT3 film prototype with 7.5% Si shows a significant improvement in the energy response at very low energies compared to the commercial EBT3 films with 4% Cl. It shows under response of 15% 5% at about 20 keV to 2% 5% at about 40?keV. However, according to the manufacturer, the addition of 7.5% Si as SiO{sub 2} adversely affected the viscosity of the active fluid and therefore affected the potential use in commercial machine coating. The latest commercial EBT3 film model with 7% Al as Al{sub 2}O{sub 3} shows an overall improvement in S{sub AD,} {sub W}(Q) compared to previous commercial EBT3 films. It shows under response at all energies <100 keV, varying from 20% 4% at 20 keV to 6% 4% at 40?keV. Conclusions: The energy response of films in the energy range <100 keV can be improved by adjusting the active layer chemical composition. Removing bromine eliminated the over response at about 40?keV. The under response at energies ?30 keV is improved by adding 7% Al to the active layer in the latest commercial EBT3 film models.

  16. In-vessel Retention Strategy for High Power Reactors - K-INERI Final Report (includes SBLB Test Results for Task 3 on External Reactor Vessel Cooling (ERVC) Boiling Data and CHF Enhancement Correlations)

    SciTech Connect (OSTI)

    F. B. Cheung; J. Yang; M. B. Dizon; J. Rempe

    2005-01-01

    In-vessel retention (IVR) of core melt is a key severe accident management strategy adopted by some operating nuclear power plants and proposed for some advanced light water reactors (ALWRs). If there were inadequate cooling during a reactor accident, a significant amount of core material could become molten and relocate to the lower head of the reactor vessel, as happened in the Three Mile Island Unit 2 (TMI-2) accident. If it is possible to ensure that the vessel head remains intact so that relocated core materials are retained within the vessel, the enhanced safety associated with these plants can reduce concerns about containment failure and associated risk. For example, the enhanced safety of the Westinghouse Advanced 600 MWe PWR (AP600), which relied upon External Reactor Vessel Cooling (ERVC) for IVR, resulted in the U.S. Nuclear Regulatory Commission (US NRC) approving the design without requiring certain conventional features common to existing LWRs. However, it is not clear that currently proposed external reactor vessel cooling (ERVC) without additional enhancements could provide sufficient heat removal for higher-power reactors (up to 1500 MWe). Hence, a collaborative, three-year, U.S. - Korean International Nuclear Energy Research Initiative (INERI) project was completed in which the Idaho National Engineering and Environmental Laboratory (INEEL), Seoul National University (SNU), Pennsylvania State University (PSU), and the Korea Atomic Energy Research Institute (KAERI) investigated the performance of ERVC and an in-vessel core catcher (IVCC) to determine if IVR is feasible for reactors up to 1500 MWe.

  17. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - HSS/Union Training Workgroup Recommendations

    Office of Environmental Management (EM)

    for 12/4/08 Topical Wrap Up Meeting by Gary Batykefer (SMWIA) Submitted for 12/4/08 Topical Wrap Up Meeting by Gary Batykefer (SMWIA) Submitted for 12/4/08 Topical Wrap Up Meeting by Gary Batykefer (SMWIA)

  18. High external quantum efficiency and fill-factor InGaN/GaN heterojunction solar cells grown by NH3-based molecular beam epitaxy

    SciTech Connect (OSTI)

    Lang, J. R.; Neufeld, C. J.; Hurni, C. A.; Cruz, S. C.; Matioli, E.; Mishra, U. K.; Speck, J. S.

    2011-04-01

    High external quantum efficiency (EQE) p-i-n heterojunction solar cellsgrown by NH3 -based molecular beam epitaxy are presented. EQE values including optical losses are greater than 50% with fill-factors over 72% when illuminated with a 1 sun AM0 spectrum. Optical absorptionmeasurements in conjunction with EQE measurements indicate an internal quantum efficiency greater than 90% for the InGaN absorbing layer. By adjusting the thickness of the top p-type GaN window contact layer, it is shown that the short-wavelength (<365 nm) quantum efficiency is limited by the minority carrier diffusion length in highly Mg-doped p-GaN.

  19. Fluence-to-Absorbed Dose Conversion Coefficients for Use in Radiological Protection of Embryo and Foetus Against External Exposure to Muons from 20MeV to 50GeV

    SciTech Connect (OSTI)

    Chen Jing

    2008-08-07

    This study used the Monte-Carlo code MCNPX to determine mean absorbed doses to the embryo and foetus when the mother is exposed to external muon fields. Monoenergetic muons ranging from 20 MeV to 50 GeV were considered. The irradiation geometries include anteroposterior (AP), postero-anterior (PA), lateral (LAT), rotational (ROT), isotropic (ISO), and top-down (TOP). At each of these irradiation geometries, absorbed doses to the foetal body were calculated for the embryo of 8 weeks and the foetus of 3, 6 or 9 months, respectively. Muon fluence-to-absorbed-dose conversion coefficients were derived for the four prenatal ages. Since such conversion coefficients are yet unknown, the results presented here fill a data gap.

  20. Union Parish, Louisiana: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Louisiana Farmerville, Louisiana Junction City, Louisiana Lillie, Louisiana Marion, Louisiana Spearsville, Louisiana Retrieved from "http:en.openei.orgw...

  1. Guodian United Power Technology Co Ltd formerly Guodian Union...

    Open Energy Info (EERE)

    Beijing Municipality, China Zip: 100044 Sector: Wind energy Product: China-based wind turbine maker and daughter company of state-owned power generator China Guodian. References:...

  2. A brief history of the Union at Y-12

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    or when they purchase goods and services for their family. Current ATLC president, Steve Jones, who has been employed at Y-12 for 39 years, agrees with that economic...

  3. Union Carbide's 20 years in nuclear energy, part 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    nuclear weapon components." The text of the document continues to highlight Y-12"s history and missions through 1962. I have reproduced the Y-12 portion of publication here...

  4. Africa-European Union Energy Partnership | Open Energy Information

    Open Energy Info (EERE)

    Programme (RECP) that will open new linkages in the energy-economic sector for industrial trade and business cooperation between Africa and Europe reaffirm the commitment to...

  5. Union Rural Electric Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 19501 Utility Location Yes Ownership C NERC Location RFC NERC RFC Yes RTO PJM Yes Activity Distribution Yes Alt Fuel Vehicle Yes Alt Fuel Vehicle2 Yes This...

  6. Union Park, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Park, Florida: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 28.56385, -81.236017 Show Map Loading map... "minzoom":false,"mappingservice":"g...

  7. Union County, New Mexico: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Mexico: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 36.3724334, -103.3587288 Show Map Loading map... "minzoom":false,"mappingservice":"goog...

  8. Union Carbides Last 20 Years in Oak Ridge

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1965 (at the start of the last 20 year period we are describing) was Dr. Clarence E. Larson. He had come to Y-12 in 1943 from California (U. of C., Davis) where he was E. O....

  9. SubTER Presentation at Town Hall- American Geophysical Union

    Broader source: Energy.gov [DOE]

    Subter, the Subsurface Crosscut at the Energy Department, conducted a Town Hall meeting to share information and create a dialogue regarding the grand challenges of energy production and storage in the subsurface.

  10. West Union, Ohio: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    lse,"poi":true,"imageoverlays":,"markercluster":false,"searchmarkers":"","locations":"text":"","title":"","link":null,"lat":38.7945166,"lon":-83.5451934,"alt":0,"address":"","i...

  11. Union County, North Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    North Carolina: Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 34.9338651, -80.543845 Show Map Loading map... "minzoom":false,"mappingservice"...

  12. January 20, 2011, HSS Union Focus Group Meeting - Attendees

    Office of Environmental Management (EM)

    (HSS) January 20, 2011 HSS FOCUS GROUP Meeting Attendees HSS Attendees: Podonsky, Glenn Eckroade, Bill Campagnone, Mari-Jo Ardaiz, Michael Berry, Tracey Boulden III, John S Brewer, Stephanie Donovan, Dick Lawrence, Andrew Lewis, Charles Lingan, Robert Worthington, Pat McArthur, Bill Roege, William Simonson, Steven Staker, Thomas Stone, Barbara Thompson, Martha Weston-Dawkes, Andy Wilcher, Larry Lily Alexander Mark Do Heidi Ascosi National Training Center - Call-in: Gasperow, Lesley Nelson, Bob

  13. January 20, 2011, HSS Union Focus Group Meeting - Overview

    Office of Environmental Management (EM)

    Draft 02-10-11 Rev 2 Office of Health, Safety and Security (HSS) Focus Group Meeting January 20, 2011 Meeting Overview The primary purpose of the January 20 HSS Focus Group Meeting was to review the most recent status of health, safety and security improvement activities, and to identify 2011 strategic path forward. Introductory Remarks: Glenn Podonsky, Chief Health, Safety and Security Officer for the U.S. Department of Energy (DOE), emphasized the importance of the upcoming January 25

  14. Energy, economics, and foreign policy in the Soviet Union

    SciTech Connect (OSTI)

    Hewett, A.

    1984-01-01

    This book has the merit of looking at the Soviet energy problem (oil, gas, coal, other) as a whole, something that Westen experts (and Soviet officials) have often failed to do. It makes fairly precise projections for the mid-1980s and cloudier ones for 1990. Hewett sees no crisis of the kind predicted by the CIA for the 1980s, but the Moscow will face hard decisions imposed by the rising cost of energy, competing economic demands, and political constraints.

  15. Union City, Oklahoma: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Energy Resources Jump to: navigation, search Equivalent URI DBpedia Coordinates 35.3917233, -97.9414364 Show Map Loading map... "minzoom":false,"mappingservice":"goog...

  16. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - 2009 inspection schedule

    Office of Environmental Management (EM)

    9/09 Office of Independent Oversight Office of Environment, Safety, and Health Evaluations (HS-64) Inspection Schedule CY 2009 Site Inspection Activity Date Lawrence Berkeley National Laboratory ES&H Inspection * Scoping visit * Planning (onsite) * Planning (offsite) * Data collection visit * Analysis & Report Writing * Validation and closeout December 3-4 (2008) January 5-9 (2009) January 21-23 January 26 - February 6 February 9-20 February 24-26 (SC) Pacific Northwest National

  17. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - EFCOG Overview

    Office of Environmental Management (EM)

    EFCOG Overview EFCOG Overview Joe Yanek EFCOG Director June 11, 2009 2 2 EFCOG EFCOG ' ' s Mission s Mission Promote excellence in all aspects of the operation, management, and integration of DOE and NNSA facilities in a safe, environmentally sound, efficient and cost-effective manner. 3 3 EFCOG Overview Founded in 1990. 67 Member Companies Representing all DOE Program Areas. Approximately 2,000 Participants Annually in EFCOG Activities. 4 4 EFCOG EFCOG ' ' s Relationships s Relationships DOE

  18. June 11, 2009, HSS/Union Task Meeting on 2009 HSS/Union Task Progress - Task Leads Schedule

    Office of Environmental Management (EM)

    05-09 TASK PLAN/SCHEDULE I. TRAINING REQUIREMENTS A. Identify basic DOE site access requirements [Leads: NTC/SMWIA/HS-10] What are the common general training requirements necessary to work at DOE sites. Jul 09 - Oct 09 1. Collect data from existing resources; research successful models, determine application to DOE 2. Compare NTC site visit results 3. Develop general requirements findings proposal and a matrix of recommended coursework Dec 09 4. Identify process for

  19. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - Action Matrix

    Office of Environmental Management (EM)

    2008 TOPICAL MEETINGS DRAFT ACTION MATRIX WORKER HEALTH AND SAFETY ACTION CATEGORIES WORKER SAFETY AND HEALTH TRAINING [04-30-08] 851 IMPLEMENTATION [07-17-08] FWP/CAIRS/CENTRAL WORKER DATA TRACKING [09-16-08] STRATEGIC INITIATIVES/AGIING WORKFORCE [11-06-08] AND GAPS / * [ ] [ ] [ ] * ( [HSS] - NIEHS/ ] ] * - [ ] * [ ] - ) ] - [ ] [ ] [ ] ] th - [ ] - [ ] ] - ( Safety. / ; Secretaries. / - - j - - - - / - - - - y BASELINING NEEDS STANDARDIZATION OF REQUIREMENTS Baseline training needs/gaps: -

  20. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - Summary

    Office of Environmental Management (EM)

    by Gary Batykefer (SMWIA) for 12/4/08 Topical Wrap Up Submitted by Gary Batykefer (SMWIA) for 12/4/08 Topical Wrap Up Submitted by Gary Batykefer (SMWIA) for 12/4/08 Topical Wrap Up

  1. EXTERNAL INDEPENDENT REVIEW (EIR) STANDARD OPERATING PROCEDURES...

    Broader source: Energy.gov (indexed) [DOE]

    and other regulatory decisions. Ensure that the design addresses results of reliability, availability, maintainability, and -inspectability (RAMI) analyses. Preliminary Design...

  2. Energy Systems Integration Facility (ESIF) External Stakeholders...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of those results and in what direction future research is going. It was noted that these peer review panels can impact more than just what's going on at NREL. Discussions have...

  3. External Assessment of Nuclear Safety Culture

    Broader source: Energy.gov [DOE]

    Presenter: Ward Sproat, Principal Vice President and Deputy Project Director for Design and Operations Waste Treatment Plant Project Bechtel National, Inc.

  4. DEMONSTRATION BULK VITRIFICATION SYSTEM (DBVS) EXTERNAL REVIEW

    SciTech Connect (OSTI)

    HONEYMAN, J.O.

    2007-02-08

    The Hanford mission to retrieve and immobilize 53 million gallons of radioactive waste from 177 underground storage tanks will be accomplished using a combination of processing by the waste treatment plant currently under construction, and a supplemental treatment that would process low-activity waste. Under consideration for this treatment is bulk vitrification, a versatile joule-heated melter technology which could be deployed in the tank farms. The Department proposes to demonstrate this technology under a Research, Development and Demonstration (RD and D) permit issued by the Washington State Department of Ecology using both non-radioactive simulant and blends of actual tank waste. From the demonstration program, data would be obtained on cost and technical performance to enable a decision on the potential use of bulk vitrification as the supplemental treatment technology for Hanford. An independent review by sixteen subject matter experts was conducted to assure that the technical basis of the demonstration facility design would be adequate to meet the objectives of the Demonstration Bulk Vitrification System (DBVS) program. This review explored all aspects of the program, including flowsheet chemistry, project risk, vitrification, equipment design and nuclear safety, and was carried out at a time when issues can be identified and corrected. This paper describes the mission need, review approach, technical recommendations and follow-on activities for the DBVS program.

  5. Q2 External Package.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    376,031 285,072 76% 214,494 57% Interest Expense and (Income) 33 Interest Expense 352,982 351,730 331,697 94% 158,351 45% 34 AFUDC (43,062) (43,204) (45,230) 105% (26,819)...

  6. Rotating copper plasmoid in external magnetic field

    SciTech Connect (OSTI)

    Pandey, Pramod K.; Thareja, Raj K.

    2013-02-15

    Effect of nonuniform magnetic field on the expanding copper plasmoid in helium and argon gases using optical emission spectroscopy and fast imaging is presented. We report a peculiar oscillatory rotation of plasmoid in magnetic field and argon ambient. The temporal variation and appearance of the dip in the electron temperature show a direct evidence of the threading and expulsion of the magnetic field lines from the plasmoid. Rayleigh Taylor instability produced at the interface separating magnetic field and plasma is discussed.

  7. External Independent Review (EIR) Report Template | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    to Critical Decision (CD) 2, and a ConstructionExecution Readiness EIR for all Major System projects prior to CD-3. An EIR typically results in both a Draft and Final EIR Report. ...

  8. Universal Ownership: Why Environmental Externalities Matter to...

    Open Energy Info (EERE)

    Initiative Focus Area: Industry Topics: Co-benefits assessment Resource Type: Lessons learnedbest practices Website: www.unepfi.orgfileadmindocuments...

  9. Property:ExternalInput | Open Energy Information

    Open Energy Info (EERE)

    + trigger + MHK ISDBInstrumentsNortek Acoustic Doppler Velocimeter + 2 Analog +, 0-5 V +, 16 bit AD + MHK ISDBInstrumentsNortek Acoustic Wave and Current Meter + 2 Analog...

  10. Help:External searches | Open Energy Information

    Open Energy Info (EERE)

    http:www.google.comsearch?hlen&safeoff&q1|Wiki&btnGSearch&meta 1|Google Usage Allows to establish a link to a search...

  11. QTR4_11 (External).xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Footnotes 1 Does not include mark-to-market adjustments required by derivative accounting guidance as amended or reflect the change in accounting for power "bookout"...

  12. External Surveillance of Geothermal Scale Deposits Employing...

    Open Energy Info (EERE)

    can detect scale buildup in pipes to 1-2 m accuracy. Radiography has also detected corrosion in piping. Development of this technique is shown to be useful of monitoring...

  13. Semiconductor diode with external field modulation

    DOE Patents [OSTI]

    Nasby, Robert D. (Albuquerque, NM)

    2000-01-01

    A non-destructive-readout nonvolatile semiconductor diode switching device that may be used as a memory element is disclosed. The diode switching device is formed with a ferroelectric material disposed above a rectifying junction to control the conduction characteristics therein by means of a remanent polarization. The invention may be used for the formation of integrated circuit memories for the storage of information.

  14. EXTERNAL INDEPENDENT REVIEW (EIR) STANDARD OPERATING PROCEDURES...

    Broader source: Energy.gov (indexed) [DOE]

    This would include the development of realistic budgets and schedules, and the consistent definition, development, and use of management reserve and contingency. (7) Have relevant...

  15. Jeff Chamberlain, External Integration Officer | JCESR

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Chamberlain conducted industrial research at several companies, notably Cabot Microelectronics, Nalco Company and Angus Chemical (owned by The Dow Chemical Company). He...

  16. External Independent Review (EIR) Standard Operating Procedure...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The purpose is to provide the Acquisition Executive and senior leadership within the Department of Energy, as well as Congress confidence, with minimal bias, that the project can ...

  17. External Resources | National Nuclear Security Administration

    National Nuclear Security Administration (NNSA)

    for maintaining the appearance of independence and neutrality in the Administrative Law System Visit The Office of Personnel Management off site Energy Recovery Act The...

  18. Effect of externally applied pressure on the magnetic behavior of Cu{sub 2}Te{sub 2}O{sub 5}(Br{sub x}Cl{sub 1-x}){sub 2}

    SciTech Connect (OSTI)

    Crowe, S. J.; Lees, M. R.; Paul, D. M. K.; Bewely, R. I.; Taylor, J.; McIntyre, G.; Zaharko, O.; Berger, H.

    2006-04-01

    The effect of externally applied pressure on the magnetic behavior of Cu{sub 2}Te{sub 2}O{sub 5}(Br{sub x}Cl{sub 1-x}){sub 2} with x=0, 0.73, and 1, is investigated by a combination of magnetic susceptibility, neutron diffraction, and neutron inelastic scattering measurements. The magnetic transition temperatures of the x=0 and 0.73 compositions are observed to increase linearly with increasing pressure at a rate of 0.23(2) and 0.04(1) K/kbar, respectively. However, the bromide shows contrasting behavior with a large suppression of the transition temperature under pressure, at a rate of -0.95(9) K/kbar. In neutron inelastic scattering measurements of Cu{sub 2}Te{sub 2}O{sub 5}Br{sub 2} under pressure only a small change to the ambient pressure magnetic excitations were observed. A peak in the density of states was seen to shift from {approx}5 meV in ambient pressure to {approx}6 meV under an applied pressure of 11.3 kbar, which was associated with an increase in the overall magnetic coupling strength.

  19. ARM - Facility News Article

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1, 2015 Facility News Submit Your AGU Presentation to ARM and ASR Bookmark and Share Submit your AGU presentations or posters by November 2 and we'll help get people to your...

  20. Hanford Sitewide Probabilistic Seismic Hazard Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... BHI-00184, Bechtel Hanford Incorporated, Richland, Washington. Lindsey KA. 1996. The Miocene ... T12C-06, AGU Meetings Department, Washington, D.C. Available at: www.agu.orgmeetings...

  1. December 4, 2008; HSS/Union Working Group Meeting on 2008 HSS/Union Topical Wrap Up - EEOICPA related activities and initiatives

    Office of Environmental Management (EM)

    Worker Health and Safety (HS-10) Current and Planned Former Worker Program and EEOICPA-related Activities/Initiatives: * Action - Standardize Former Worker Program (FWP) outreach training and vehicles for communication Response - Plan to hold a series of program conference calls to discuss strategies for outreach: share lessons learned, identify joint outreach efforts in order to reach a larger audience, discuss how to better align communication strategies based on demographics of each

  2. Treatment of External Levels in Neutron Resonance Fitting: Application...

    Office of Scientific and Technical Information (OSTI)

    The distinction between channel radii and effective radii, crucial in the present context, is emphasized. less Authors: Froehner, Fritz H. 1 ; Bouland, Olivier 2 + Show ...

  3. External Technical Review for Evaluation of System Level Modeling...

    Office of Environmental Management (EM)

    Hanford Site Liquid Waste Process September 2009 Monica C. Regalbuto Office of Waste Processing DOEEM Kevin G. Brown Vanderbilt University and CRESP David W. DePaoli Oak Ridge ...

  4. Monitoring external beam radiotherapy using real-time beam visualization

    SciTech Connect (OSTI)

    Jenkins, Cesare H.; Naczynski, Dominik J.; Yu, Shu-Jung S.; Xing, Lei

    2015-01-15

    Purpose: To characterize the performance of a novel radiation therapy monitoring technique that utilizes a flexible scintillating film, common optical detectors, and image processing algorithms for real-time beam visualization (RT-BV). Methods: Scintillating films were formed by mixing Gd{sub 2}O{sub 2}S:Tb (GOS) with silicone and casting the mixture at room temperature. The films were placed in the path of therapeutic beams generated by medical linear accelerators (LINAC). The emitted light was subsequently captured using a CMOS digital camera. Image processing algorithms were used to extract the intensity, shape, and location of the radiation field at various beam energies, dose rates, and collimator locations. The measurement results were compared with known collimator settings to validate the performance of the imaging system. Results: The RT-BV system achieved a sufficient contrast-to-noise ratio to enable real-time monitoring of the LINAC beam at 20 fps with normal ambient lighting in the LINAC room. The RT-BV system successfully identified collimator movements with sub-millimeter resolution. Conclusions: The RT-BV system is capable of localizing radiation therapy beams with sub-millimeter precision and tracking beam movement at video-rate exposure.

  5. External first quarter package (1-27-2012).xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    80% (5,089) 13% 36 Net Interest Expense (Income) 272,359 270,121 274,633 102% 67,852 25% - 37 Net Revenues (Expenses) 81,683 105,910 (16,361) -115% 29,227 28% <1 <2...

  6. Benchmarking Outreach and Data Collection Techniques for External Portfolios

    Broader source: Energy.gov [DOE]

    This document contains the transcript for the Benchmarking Outreach and Data Collection Techniques webinar, held on April 25, 2013.

  7. Microsoft Word - External 2nd PP Elections Summary_10242011.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Period (FY 2012-2014) updated October 24, 2011 2 Second Purchase Period A-HWM Load Elections Total for Load Following and Slice Customers 0.0 50.0 100.0 150.0 200.0 250.0 300.0...

  8. External Independent Review (EIR) Scoping Meeting Agreement Form...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Review (EIR) prior to Critical Decision (CD) 2, and a ConstructionExecution Readiness EIR for all Major System projects prior to CD-3. The EIR Standard Operating Procedures ...

  9. Help:External SPARQL integration | Open Energy Information

    Open Energy Info (EERE)

    navigation, search Integrating with Reegle logo.png OpenEI is engaged in an ongoing linked open data collaboration with Reegle1. This page serves to document a few of the...

  10. Avoided Cost Rates, Environmental Externalities | OpenEI Community

    Open Energy Info (EERE)

    or even individual utilities counting (i.e. pricing) the avoided emmissions, healt benefits, etc. that flow from cleaner sources of generation. I am aware of 2010 FERC rule...

  11. !3rd QUARTER REVIEW External PACKAGE.xls

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Footnotes 1 Does not include mark-to-market adjustments required by derivative accounting guidance as amended or reflect the change in accounting for power "bookout"...

  12. Condensate fraction of cold gases in a nonuniform external potential

    SciTech Connect (OSTI)

    Astrakharchik, G. E.; Krutitsky, K. V.

    2011-09-15

    Exact calculation of the condensate fraction in multidimensional inhomogeneous interacting Bose systems in a confining potential of arbitrary shape is a difficult computational problem. We have developed an iterative procedure which allows us to calculate the condensate fraction as well as the corresponding eigenfunction of the one-body density matrix. We successfully validate this procedure in diffusion Monte Carlo simulations of a Bose gas in an optical lattice at zero temperature. We also discuss the relation between different criteria used for testing coherence in cold Bose systems, such as the fraction of particles that are superfluid, condensed, or in the zero-momentum state.

  13. Apparatus for externally controlled closed-loop feedback digital epitaxy

    DOE Patents [OSTI]

    Eres, Djula (Knoxville, TN); Sharp, Jeffrey W. (Knoxville, TN)

    1996-01-01

    A method and apparatus for digital epitaxy. The apparatus includes a pulsed gas delivery assembly that supplies gaseous material to a substrate to form an adsorption layer of the gaseous material on the substrate. Structure is provided for measuring the isothermal desorption spectrum of the growth surface to monitor the active sites which are available for adsorption. The vacuum chamber housing the substrate facilitates evacuation of the gaseous material from the area adjacent the substrate following exposure. In use, digital epitaxy is achieved by exposing a substrate to a pulse of gaseous material to form an adsorption layer of the material on the substrate. The active sites on the substrate are monitored during the formation of the adsorption layer to determine if all the active sites have been filled. Once the active sites have been filled on the growth surface of the substrate, the pulse of gaseous material is terminated. The unreacted portion of the gas pulse is evacuated by continuous pumping. Subsequently, a second pulse is applied when availability of active sites is determined by studying the isothermal desorption spectrum. These steps are repeated until a thin film of sufficient thickness is produced.

  14. External Insulation of Masonry Walls and Wood Framed Walls

    SciTech Connect (OSTI)

    Baker, P.

    2013-01-01

    The use of exterior insulation on a building is an accepted and effective means to increase the overall thermal resistance of the assembly that also has other advantages of improved water management and often increased air tightness of building assemblies. For thin layers of insulation (1 to 1 ), the cladding can typically be attached directly through the insulation back to the structure. For thicker insulation layers, furring strips have been added as a cladding attachment location. This approach has been used in the past on numerous Building America test homes and communities (both new and retrofit applications), and has been proven to be an effective and durable means to provide cladding attachment. However, the lack of engineering data has been a problem for many designers, contractors, and code officials. This research project developed baseline engineering analysis to support the installation of thick layers of exterior insulation on existing masonry and frame walls. Furthermore, water management details necessary to integrate windows, doors, decks, balconies and roofs were created to provide guidance on the integration of exterior insulation strategies with other enclosure elements.

  15. Apparatus for externally controlled closed-loop feedback digital epitaxy

    DOE Patents [OSTI]

    Eres, D.; Sharp, J.W.

    1996-07-30

    A method and apparatus for digital epitaxy are disclosed. The apparatus includes a pulsed gas delivery assembly that supplies gaseous material to a substrate to form an adsorption layer of the gaseous material on the substrate. Structure is provided for measuring the isothermal desorption spectrum of the growth surface to monitor the active sites which are available for adsorption. The vacuum chamber housing the substrate facilitates evacuation of the gaseous material from the area adjacent the substrate following exposure. In use, digital epitaxy is achieved by exposing a substrate to a pulse of gaseous material to form an adsorption layer of the material on the substrate. The active sites on the substrate are monitored during the formation of the adsorption layer to determine if all the active sites have been filled. Once the active sites have been filled on the growth surface of the substrate, the pulse of gaseous material is terminated. The unreacted portion of the gas pulse is evacuated by continuous pumping. Subsequently, a second pulse is applied when availability of active sites is determined by studying the isothermal desorption spectrum. These steps are repeated until a thin film of sufficient thickness is produced. 5 figs.

  16. Stabilization of solitons under competing nonlinearities by external potentials

    SciTech Connect (OSTI)

    Zegadlo, Krzysztof B. Karpierz, Miroslaw A.; Wasak, Tomasz; Trippenbach, Marek; Malomed, Boris A.

    2014-12-15

    We report results of the analysis for families of one-dimensional (1D) trapped solitons, created by competing self-focusing (SF) quintic and self-defocusing (SDF) cubic nonlinear terms. Two trapping potentials are considered, the harmonic-oscillator (HO) and delta-functional ones. The models apply to optical solitons in colloidal waveguides and other photonic media, and to matter-wave solitons in Bose-Einstein condensates loaded into a quasi-1D trap. For the HO potential, the results are obtained in an approximate form, using the variational and Thomas-Fermi approximations, and in a full numerical form, including the ground state and the first antisymmetric excited one. For the delta-functional attractive potential, the results are produced in a fully analytical form, and verified by means of numerical methods. Both exponentially localized solitons and weakly localized trapped modes are found for the delta-functional potential. The most essential conclusions concern the applicability of competing Vakhitov-Kolokolov (VK) and anti-VK criteria to the identification of the stability of solitons created under the action of the competing SF and SDF terms.

  17. Microsoft Word - EXTERNAL BPA classroom presentations CA and...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to K-12 classes throughout the Northwest as part of its commitment to supporting energy literacy and education among the region's young people. "These are our future ratepayers...

  18. New Energy Efficiency Standards for External Power Supplies to...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    "Appliance efficiency standards and high quality appliances go hand-in-hand, and represent a huge opportunity to help families and businesses save money by saving energy," said ...

  19. THE PROPAGATION OF RELATIVISTIC JETS IN EXTERNAL MEDIA

    SciTech Connect (OSTI)

    Bromberg, Omer; Piran, Tsvi; Sari, Re'em; Nakar, Ehud

    2011-10-20

    Relativistic jets are ubiquitous in astrophysical systems that contain compact objects. They transport large amounts of energy to large distances from the source and their interaction with the ambient medium has a crucial effect on the evolution of the system. The propagation of the jet is characterized by the formation of a shocked 'head' at the front of the jet which dissipates the jet's energy and a cocoon that surrounds the jet and potentially collimates it. We present here a self-consistent, analytic model that follows the evolution of the jet and its cocoon, and describes their interaction. We show that the critical parameter that determines the properties of the jet-cocoon system is the dimensionless ratio between the jet's energy density and the rest-mass energy density of the ambient medium. This parameter, together with the jet's injection angle, also determines whether the jet is collimated by the cocoon or not. The model is applicable to relativistic, unmagnetized jets on all scales and may be used to determine the conditions in active galactic nucleus (AGN) jets as well as in gamma-ray bursts (GRBs) or microquasars. It shows that AGN and microquasar jets are hydrodynamically collimated due to the interaction with the ambient medium, while GRB jets can be collimated only inside a star and become uncollimated once they break out.

  20. CEA ? External Power Supplies, CCE Overview and Update presentation...

    Office of Environmental Management (EM)

    & Publications AHAM - CCE Overview and Update, dated 06072011 NEMA Distribution Transformers, CCE Overview and Update presentation, dated 05242011 NEMA Lighting, CCE Overview...

  1. Report of the External Expert Peer Review Panel: DOE Benefits...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Fellow, 1997-1998 American Association for the ... Annual Review of Public Health. 25: 119-138. Keith, D. W. and ... Journal of the Air & Waste Management Association. ...

  2. Microsoft Word - RSS Elections Summary_external_10242011_adk...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DFS andor FORS for seven non-Federal resources, including three wind projects, two biogas projects, and two hydro projects. BPA is providing DFS for three non-Federal resources...

  3. CEA … External Power Supplies, CCE Overview and Update presentation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... it may be distributed under different brand names. * Is made up of models that do not ... (marked as modifiedrevised) (e.g., new brand info, new or different model numbers, ...

  4. Microsoft Word - FY09 Work Plan_External.doc

    Office of Environmental Management (EM)

    control systems security in the energy sector NSTB National SCADA Test Bed U.S. Department of Energy Office of Electricity Delivery and Energy Reliability DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan (REVISED 07/31/2009) A plan of work for the National Laboratories that form the National SCADA Test Bed: Argonne National Laboratory Idaho National Laboratory Oak Ridge National Laboratory Pacific Northwest National Laboratory Sandia National Laboratories Fiscal Year 2 0 0 9 Work Plan

  5. Prediction of External Corrosion for Steel Cylinders--2007 Report

    SciTech Connect (OSTI)

    Schmoyer, Richard L

    2008-01-01

    Depleted uranium hexafluoride (DUF{sub 6}) is stored in over 62,000 containment cylinders at the Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, and at the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. Over 4,800 of the cylinders at Portsmouth were recently moved there from the East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee. The cylinders range in age up to 56 years and come in various models, but most are 48-inch diameter 'thin-wall'(312.5 mil) and 'thick-wall' (625 mil) cylinders and 30-inch diameter '30A' (including '30B') cylinders with 1/2-inch (500 mil) walls. Most of the cylinders are carbon steel, and they are subject to corrosion. The United States Department of Energy (DOE) manages the cylinders to maintain them and the DUF{sub 6} they contain. Cylinder management requirements are specified in the System Requirements Document (LMES 1997a), and the activities to fulfill them are specified in the System Engineering Management Plan (LMES 1997b). This report documents activities that address DUF{sub 6} cylinder management requirements involving measuring and forecasting cylinder wall thicknesses. As part of these activities, ultrasonic thickness (UT) measurements are made on samples of cylinders. For each sampled cylinder, multiple measurements are made in an attempt to find, approximately, the minimum wall thickness. Some cylinders have a skirt, which is an extension of the cylinder wall to protect the head (end) and valve. The head/skirt interface crevice is thought to be particularly vulnerable to corrosion, and for some skirted cylinders, in addition to the main body UT measurements, a separate suite of measurements is also made at the head/skirt interface. The main-body and head/skirt minimum thickness data are used to fit models relating minimum thickness to cylinder age, nominal thicknesses, and cylinder functional groups defined in terms of plant site, storage yard, top or bottom row storage positions, etc. These models are then used to compute projections of numbers of cylinders expected to fail various minimum wall thickness criteria. The minimum wall thickness criteria are as follows. For thin-wall cylinders: 0 (breach), 62.5, and 250 mils. For thick-wall cylinders: 0, 62.5, and 500 mils. For 30A cylinders: 0, 62.5, and 100 mils. Each of these criteria triplets are based respectively on (1) loss of DUF{sub 6} (breaching), (2) safe handling and stacking operations, and (3) ANSI N14.1 standards for off-site transport and contents transfer. This report complements and extends previous editions of the cylinder corrosion report by Lyon (1995, 1996, 1997, 1998, 2000), by Schmoyer and Lyon (2001, 2002, 2003), and by Schmoyer (2004). These reports are based on UT data collected in FY03 and before. In this report UT data collected after FY03 but before FY07 is combined with the earlier data, and all of the UT data is inventoried chronologically and by the various functional groups. The UT data is then used to fit models of maximum pit depth and minimum wall thickness, statistical outliers are investigated, and the fitted models are used to extrapolate minimum thickness estimates into the future and in turn to compute projections of numbers of cylinders expected to fail various thickness criteria. A model evaluation is performed comparing UT measurements made after FY05 with model-fitted projections based only on data collected in FY05 and before. As in previous reports, the projections depend on the treatment of outliers.

  6. Prediction of External Corrosion for Steel Cylinders--2004 Report

    SciTech Connect (OSTI)

    Schmoyer, RLS

    2004-07-07

    Depleted uranium hexafluoride (UF{sub 6}) is stored in over 60,000 steel cylinders at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee, at the Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, and at the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. The cylinders range in age from 4 to 53 years. Although when new the cylinders had wall thicknesses specified to within manufacturing tolerances, over the years corrosion has reduced their actual wall thicknesses. The UF{sub 6} Cylinder Project is managed by the United States Department of Energy (DOE) to safely maintain the UF{sub 6} and the cylinders containing it. This report documents activities that address UF{sub 6} Cylinder Project requirements and actions involving forecasting cylinder wall thicknesses. These requirements are delineated in the System Requirements Document (LMES 1997a), and the actions needed to fulfill them are specified in the System Engineering Management Plan (LMES 1997b). The report documents cylinder wall thickness projections based on models fit to ultrasonic thickness (UT) measurement data. UT data is collected at various locations on randomly sampled cylinders. For each cylinder sampled, the minimum UT measurement approximates the actual minimum thickness of the cylinder. Projections of numbers of cylinders expected to fail various thickness criteria are computed from corrosion models relating minimum wall thickness to cylinder age, initial thickness estimates, and cylinder subpopulations defined in terms of plant site, yard, top or bottom storage positions, nominal thickness, etc. In this report, UT data collected during FY03 is combined with UT data collected in earlier years (FY94-FY02), and all of the data is inventoried chronologically and by various subpopulations. The UT data is used to fit models of maximum pit depth and minimum thickness, and the fitted models are used to extrapolate minimum thickness estimates into the future and in turn to compute estimates of numbers of cylinders expected to fail various thickness criteria. A model evaluation is performed comparing UT measurements made in FY03 with model-fitted projections based only on data collected before FY03.

  7. Prediction of External Corrosion for Steel Cylinders - 1998 Report

    SciTech Connect (OSTI)

    Lyon, B.F.

    1998-01-01

    The United States Department of Energy (DOE) currently manages the UF, Cylinder Project. The project was formed to maintain and safely manage depleted uranium hexafluoride (UF{sub 6}) stored in approximately 50,000 carbon steel cylinders. The cylinders located at three DOE sites: the K-25 site at Oak Ridge, Tennessee (K-25); the Paducah Gaseous Diffusion Plant in Paducah, Kentucky (PGDP), and the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. The System Requirements Document (SRD) (LMES 1997a) delineates the requirements of the project. The appropriate actions needed to fulfill these requirements are then specified within the System Engineering Management Plan (SEMP) (LMES 1997b). The report presented herein documents activities that in whole or in part satisfy specific requirements and actions stated in the UF{sub 6} Cylinder Project SRD and SEMP with respect to forecasting cylinder conditions. The wall thickness projections made in this report are based on the assumption that the corrosion trends noted will continue. Some activities planned may substantially reduce the rate of corrosion, in which case the results presented here are conservative. The results presented here are intended to supercede and enlarge the scope of those presented previously (Lyon 1995,1996, 1997). In particular, projections are made for thin-walled cylinders (nominal initial thickness 312.5 mils) and thick-walled cylinders (nominal initial thickness 625 mils). In addition, a preliminary analysis is conducted for the minimum thickness at the head/skirt interface for skirted cylinders.

  8. Prediction of External Corrosion for Steel Cylinders 2001 Report

    SciTech Connect (OSTI)

    Schmoyer, RLS

    2001-09-17

    The United States Department of Energy (DOE) currently manages the UF{sub 6} Cylinder Project. The project was formed to maintain and safely manage the depleted uranium hexafluoride (UF{sub 6}) stored in approximately 50,000 carbon steel cylinders. The cylinders are located at three DOE sites: the ETTP site (K-25) at Oak Ridge, Tennessee; the Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, and the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. The System Requirements Document (SRD) (LMES 1997a) delineates the requirements of the project. The appropriate actions needed to fulfill these requirements are then specified within the System Engineering Management Plan (SEMP) (LMES 1997b). This report documents activities that in whole or in part satisfy specific requirements and actions stated in the UF{sub 6} Cylinder Project SRD and SEMP with respect to forecasting cylinder conditions. The results presented here supercede those presented previously (Lyon 1995, 1996, 1997, 1998, 2000). Many of the wall thickness projections made in this report are conservative, because they are based on the assumption that corrosion trends will continue, despite activities such as improved monitoring, relocations to better storage, and painting.

  9. Prediction of External Corrosion for Steel Cylinders--2002 Report

    SciTech Connect (OSTI)

    Schmoyer, RLS

    2002-07-31

    The United States Department of Energy (DOE) manages the UF{sub 6} Cylinder Project. The project was formed to maintain and safely manage the depleted uranium hexafluoride (UF{sub 6}) stored in approximately 50,000 carbon steel cylinders. The cylinders are located at three DOE sites: the East Tennessee Technology Park (ETTP) site in Oak Ridge, Tennessee; the Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, and the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. The System Requirements Document (SRD) (LMES 1997a) delineates the requirements of the project, and the actions needed to fulfill these requirements are specified in the System Engineering Management Plan (SEMP) (LMES 1997b). This report documents activities that in whole or part satisfy specific requirements and actions stated in the UF{sub 6} Cylinder Project SRD and SEMP with respect to forecasting cylinder conditions. The results presented here supercede those presented by Lyon (1995, 1996, 1997, 1998, 2000), and Schmoyer and Lyon (2001). Many of the wall thickness projections made in this report are conservative, because they are based on the assumption that corrosion trends will continue, despite activities such as improved monitoring, relocations to better storage, painting, and other improvements in storage conditions relative to the conditions at the times most of the wall thickness measurements were made. For thin-wall cylinders (design nominal wall thickness 312.5 mils), the critical minimum wall thicknesses criteria used in this report are 0 (breach), 62.5 mils, and 250 mils (1 mil = 0.001 in.). For thick-wall cylinders (design nominal wall thickness 625 mils), the thickness criteria used in this report are 0, 62.5 mils, and 500 mils. The criteria triples are preliminary boundaries identified within the project that indicate (1) loss of material (UF{sub 6}), (2) safe handling and stacking operations, and (3) standards for off-site transport and contents transfer criteria, respectively. In general, these criteria are based on an area of wall thinning. However, the minimum thickness predicted in this report is essentially for a point--an area of about 0.01 square inches--because the thickness measurements on which the predictions are based are essentially for points. For thicknesses criteria greater than zero, conclusions based on minimum point thicknesses are conservative. Because of the interaction of UF{sub 6}, with atmospheric moisture and steel, a point breach would deteriorate in a year to one-inch diameter hole (DNFSB 1995), however, and so small area approximations should be close for the breach criteria. The most recently collected data, entered into the corrosion model database and not available for the previous report (Schmoyer and Lyon 2001), consists of evaluations of wall loss of 48 inch thin-wall cylinders: 301 cylinders at Paducah, 101 at ETTP, and 139 at Portsmouth; 14 thick-wall cylinders at Portsmouth; and 99 model 30A cylinders at Paducah. However, because of missing values, repeated measures on the same cylinders, outliers, and other data problems, however, not all of these measurements are necessarily used in the corrosion analysis. In several cases, difficulty with the data is also due to a mathematical approach to cylinder corrosion modeling that is used in this report, in Schmoyer and Lyon (2001), and in earlier reports by Lyon. Therefore, an alternative approach is also considered in this report. In previous reports, minimum wall thicknesses have been modeled indirectly through separate models of initial thickness and maximum pit depth. In order to estimate minimum wall thicknesses, the initial thickness and maximum pit depth models are combined using mathematics that assumes independence of the statistical distributions of the initial thicknesses and maximum pit depths. Initial thicknesses are modeled from wall thickness maxima measured at relatively uncorroded wall areas of each cylinder. Maximum pit depths for each cylinder are estimated as differences between the initial thickness estimates and me

  10. Prediction of External Corrosion for Steel Cylinders 2003 Report

    SciTech Connect (OSTI)

    Schmoyer, RLS

    2003-09-24

    Depleted uranium hexafluoride (UF{sub 6}) is stored in over 60,000 steel cylinders at the East Tennessee Technology Park (ETTP) in Oak Ridge, Tennessee, at the Paducah Gaseous Diffusion Plant (PGDP) in Paducah, Kentucky, and at the Portsmouth Gaseous Diffusion Plant (PORTS) in Portsmouth, Ohio. The cylinders range in age from six to 52 years. Although when new the cylinders had wall thicknesses specified to within manufacturing tolerances, over the years corrosion has reduced their actual wall thicknesses. The UF{sub 6} Cylinder Project is managed by the United States Department of Energy (DOE) to safely maintain the UF{sub 6} and the cylinders containing it. The requirements of the Project are delineated in the System Requirements Document (LMES 1997a), and the actions needed to fulfill those requirements are specified in the System Engineering Management Plan (LMES 1997b). This report documents activities that address requirements and actions involving forecasting cylinder wall thicknesses. Wall thickness forecasts are based on models fit to ultrasonic thickness (UT) measurement data. First, UT data collected during FY02 is combined with UT data collected in earlier years (FY92-FY01), and all of the data is inventoried chronologically and by various subpopulations. Next, the data is used to model either maximum pit depth or minimum thickness as a function of cylinder age, subpopulation (e.g., PGDP G-yard, bottom-row cylinders), and initial thickness estimates. The fitted models are then used to extrapolate minimum thickness estimates into the future and to compute estimates of numbers of cylinders expected to fail various thickness criteria. A model evaluation is performed comparing UT measurements made in FY02 with model-fitted projections based only on data collected before FY02. The FY02 UT data, entered into the corrosion model database and not available for the previous edition of this report (Schmoyer and Lyon 2002), consists of thickness measurements of 48'' thin-wall cylinders: 102 cylinders at Paducah, 104 at ETTP, and 117 at Portsmouth; and 72 thick-wall cylinders at Portsmouth. However, because of missing values, repeated measures on the same cylinders, outliers, and other data problems, not all of these measurements are necessarily used in the corrosion analysis, and some previous measurements may simply be replaced with the new ones. In this edition of the report, cylinder subpopulation definitions and counts are updated using the latest (as of June 2003) information from the Cylinder Inventory Database (CID). Cylinders identified in the CID as painted during the last ten years are excluded from subpopulations considered at-risk of failing minimum thickness criteria, because it is assumed that painting fully arrests corrosion for ten years. As in the previous edition of the report, two different approaches to corrosion modeling are pursued: (1) a direct approach in which minimum thickness is modeled directly as a function of age, subpopulation, and initial thickness estimates; and (2) an indirect approach, in which maximum pit depth is modeled, and the pit-depth model is then combined with a model of initial thickness to compute estimates of minimum thickness.

  11. Possible changes for mudflow and avalanche activity in former Soviet Union due to the global warming

    SciTech Connect (OSTI)

    Glazovskaya, T.G.; Sidorova, T.L.; Seliverstov, Y.G.

    1996-12-31

    Past research, as well as laboratory evidence have revealed a relationship between climate, mudflow, and avalanche activity. It is possible to predict changes in mudflow and avalanche activity by using climate models. In this study, the GFDL model was used which contained data on mean monthly air temperature, precipitation, and carbon dioxide concentrations.

  12. SF6432-NI (02-01-12) Fixed Price Former Soviet Union

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    INDEPENDENT CONTRACTOR RELATIONSHIP NOTICE OF POTENTIAL DELAY ORDER OF PRECEDENCE & LANGUAGE PAYMENT PRICING OF CONTRACT AND SUBCONTRACT MODIFICATIONS PROPERTY RECYCLED AND...

  13. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in developing metal rolling techniques. "Because of Y-12's vast reservoir of industrial skills, many problems in areas such as metallurgy, special fabrications, chemistry,...

  14. A look back at Union Carbides 20 Years in Nuclear Energy [The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the intervening years. The publication covers all sites in Oak Ridge and to give a fuller picture of the total scope of accomplishments, I will include the Milestones from each...

  15. US - Former Soviet Union environmental restoration and waste management activities, March 1994

    SciTech Connect (OSTI)

    Not Available

    1994-03-01

    The Peaceful Uses of Atomic Energy Agreement was signed between DOE and the Ministry of Atomic Energy for the Russian Federation and provides a mechanism for cooperation in research, development, and safe utilization of nuclear energy. Under the umbrella of this agreement, DOE and the former Ministry of Atomic Power and Industry signed a Memorandum of Cooperation in the areas of environmental restoration and waste management in September 1990. This document discusses the environmental situation, science and technology process, technical projects (separations, contaminant transport, waste treatment, environmental restoration), scientist exchanges, enhanced data transfer, the US-Russia industry partnership (conference, centers), and future actions.

  16. New automated inventory/material accounting system (AIMAS) version for former Soviet Union countries

    SciTech Connect (OSTI)

    Kuzminski, Jozef; Ewing, Tom; Sakunov, Igor; Drapey, Sergey; Nations, Jim

    2009-01-01

    AIMAS (Automated Inventory/Material Accounting System) is a PC-based application for site-level nuclear material accountancy that was originally developed in the late 90's as a part of the U.S Department of Energy Assistance Program to Ukraine. Designed to be flexible and secure, plus place minimal demands on computing infrastructure, it was originally developed to run in early Windows operating system (OS) environments like W98 and W3.1. The development, support, and maintenance of AIMAS were transferred to Ukraine in 2002. Because it is highly flexible and can be configured to meet diverse end-user's needs, the software has been used at several facilities in Ukraine. Incorporating added functionality is planned to support nuclear installations in the Republic of Kazakhstan and Uzbekistan, as well. An improved 32-bit version of AIMAS has recently been developed to operate effectively on modern PCs running the latest Windows OS by AVIS, the Ukrainian developer. In the paper we discuss the status of AIMAS, plans for new functions, and describe the strategy for addressing a sustainable software life-cycle while meeting user requirements in multiple FSU countries.

  17. Union Carbides Last 20 Years in Oak Ridge ? part 3

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    national news event that captured Carbide's top management attention was the Three Mile Island, Pennsylvania nuclear accident. ORNL responded quickly, sending experts to help....

  18. Union Carbides 20 years in nuclear energy, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  19. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    large-scale precision machining of beryllium began. "1953 - Additional uranium casting facilities and another uranium machining shop were installed and completed by fall. A...

  20. A look back at Union Carbides FIRST 20 Years in Nuclear Energy...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are the main research building, a power and utilities building, and an ores and minerals development laboratory. "FROM PRODUCTION TO RESEARCH - Uranium salts find their way into...