Powered by Deep Web Technologies
Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Vehicle underbody fairing  

DOE Patents [OSTI]

A vehicle underbody fairing apparatus for reducing aerodynamic drag caused by a vehicle wheel assembly, by reducing the size of a recirculation zone formed under the vehicle body immediately downstream of the vehicle wheel assembly. The fairing body has a tapered aerodynamic surface that extends from a front end to a rear end of the fairing body with a substantially U-shaped cross-section that tapers in both height and width. Fasteners or other mounting devices secure the fairing body to an underside surface of the vehicle body, so that the front end is immediately downstream of the vehicle wheel assembly and a bottom section of the tapered aerodynamic surface rises towards the underside surface as it extends in a downstream direction.

Ortega, Jason M. (Pacifica, CA); Salari, Kambiz (Livermore, CA); McCallen, Rose (Livermore, CA)

2010-11-09T23:59:59.000Z

2

Fellows' Prize Nominations  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Nominations Fellows' Prize Nominations Prize details and nomination procedures. Fellows' Prize for Outstanding Research in Science or Engineering Purpose To commend individuals for...

3

Composite Underbody Attachment  

Broader source: Energy.gov [DOE]

2010 DOE Vehicle Technologies and Hydrogen Programs Annual Merit Review and Peer Evaluation Meeting, June 7-11, 2010 -- Washington D.C.

4

Josh Beale Candidate Statement Nominators  

E-Print Network [OSTI]

Josh Beale ­ Candidate Statement Nominators: Rosa Nobarni Audrey Chan Since I started my university

New South Wales, University of

5

Secretarial Award Nomination Form  

Broader source: Energy.gov (indexed) [DOE]

Secretary's Awards Program Nomination Form Secretary's Awards Program Nomination Form 1. Type of Award (Check Applicable Box) Secretary's Honor Awards Secretary's Departure Awards Secretary's James R. Schlesinger Award Exceptional Service Award Appreciation Award Excellence Award Distinguished Service Award Achievement Award Meritorious Service Award 2. Nominee (Full) Name Check if Group list is attached (As it is to appear on the certificate) For Departure and Appreciation Awards Only 3. Certificate Date 4. Award Presentation Date 5. Current Position Title 6. Award Justification: Continue on blank sheet of paper and attach if you need more space. 7. Award Citation: A citation of no more than 20 lines must be attached to nomination form. 8 . Requesting Office : 9a. Local Approvals: One or more signatures is typical but not required

6

WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM  

E-Print Network [OSTI]

WYSS TECHNOLOGY DEVELOPMENT FELLOWSHIP NOMINATION FORM 1. Biographical Sketch _____________________________________________ ________________________________________ Wyss Enabling Technology Platform Focus research plans relative to Wyss Enabling Technology Platform. 3. Enclose supporting letter from nominator

7

International Phenomenological Society On Nominalism  

E-Print Network [OSTI]

International Phenomenological Society On Nominalism Author(s): Geoffrey Hellman Source: Philosophy and Phenomenological Research, Vol. 62, No. 3 (May, 2001), pp. 691-705 Published by: International Phenomenological contact support@jstor.org. . International Phenomenological Society is collaborating with JSTOR

Hellman, Geoffrey

8

National Defense University (NDU) Nomination Package Checklist  

Broader source: Energy.gov (indexed) [DOE]

- November 2012 - November 2012 National Defense University (NDU) Nomination Package Checklist SEND 2 COPIES OF THE NOMINATION PACKAGE TO THE NDU UNIVERSITY REGISTRAR'S OFFICE Each student nomination package must include the following items: NDU Student Nomination Form One official transcript (highest degree earned) One-page student biography or résumé (include education and career history) Two Letters of Recommendation World-Wide Travel Statement Statement of Purpose (No more than two pages) Signed National Defense University Privacy Act Statement Signed Education Release Form (if nominating agency requires copies of final student evaluation and/or transcript) SAC students must also include: Senior Acquisition Course Nomination Form

9

2015 Federal Energy and Water Management Awards: Nomination Quick...  

Energy Savers [EERE]

Nomination Quick Reference 2015 Federal Energy and Water Management Awards: Nomination Quick Reference Document offers a checklist of items needed to complete a nomination for the...

10

Microsoft Word - fellows_nomination_reworked.doc  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of Contents 2) Letter of Nomination 3) Letters of Endorsement 4) CVResume 5) Publications and Citations Contains Export Control Sensitive Information...

11

Property:Nominal Voltage | Open Energy Information  

Open Energy Info (EERE)

Nominal Voltage Nominal Voltage Jump to: navigation, search Property Name Nominal Voltage Property Type Number This is a property of type Number. Pages using the property "Nominal Voltage" Showing 22 pages using this property. D Distributed Generation Study/10 West 66th Street Corp + 480 + Distributed Generation Study/615 kW Waukesha Packaged System + 480 + Distributed Generation Study/Aisin Seiki G60 at Hooligans Bar and Grille + 240 + Distributed Generation Study/Arrow Linen + 480 + Distributed Generation Study/Dakota Station (Minnegasco) + 0 + Distributed Generation Study/Elgin Community College + 4,160 + Distributed Generation Study/Emerling Farm + 480 + Distributed Generation Study/Floyd Bennett + 480 + Distributed Generation Study/Harbec Plastics + 480 +

12

Agency Energy Coordinators for Award Nominations  

Broader source: Energy.gov [DOE]

Federal agency energy coordinators handle all nominations for the Federal Energy and Water Management Awards. Contact your agency energy coordinator well in advance of all award deadlines to learn...

13

Nominate Your Mentor for the Presidential Award in Science, Math...  

Office of Environmental Management (EM)

Nominate Your Mentor for the Presidential Award in Science, Math, and Engineering Mentoring Nominate Your Mentor for the Presidential Award in Science, Math, and Engineering...

14

Aviation Management Professional Award Nomination for:  

Broader source: Energy.gov (indexed) [DOE]

Professional Nomination for Professional Nomination for Managerial/Official Award: Joseph M. Ginanni Aviation Manager US Department of Energy/National Nuclear Security Administration, Nevada Site Office Bio Joseph M. Ginanni Aviation Manager National Nuclear Security Administration Nevada Site Office Mr. Ginanni has worked for the Nevada Site Office (NSO) since 1991. For the past five years, he has served as the NSO Aviation Manager, managing and overseeing the Management and Operating contractor's aviation services department and their operation and maintenance of NSO's five aircraft (3 Beechcraft King Airs and 2 Bell 412s) which are stationed at both Nellis AFB, NV and Andrews AFB, MD. Prior to his position as Aviation Manager, he was the team leader for the Radioactive Waste

15

Full Abstraction for Nominal General References  

E-Print Network [OSTI]

}. For each m (MA \\ IA): iA A m1 A · · · A mi A m Initial moves are P-Answers,and whenever m1 A m2, m1, m2 The -calculus is a functional calculus with nominal references. TY A, B ::= ½ | ? | [A] | A B | A B TE M, N ::= x | x.M | M N -term | skip return | n | pred M | succ N arithmetic | if0 M then N1 else N2

16

Nominal Performance Biosphere Dose Conversion Factor Analysis  

SciTech Connect (OSTI)

The purpose of this report was to document the process leading to development of the Biosphere Dose Conversion Factors (BDCFs) for the postclosure nominal performance of the potential repository at Yucca Mountain. BDCF calculations concerned twenty-four radionuclides. This selection included sixteen radionuclides that may be significant nominal performance dose contributors during the compliance period of up to 10,000 years, five additional radionuclides of importance for up to 1 million years postclosure, and three relatively short-lived radionuclides important for the human intrusion scenario. Consideration of radionuclide buildup in soil caused by previous irrigation with contaminated groundwater was taken into account in the BDCF development. The effect of climate evolution, from the current arid conditions to a wetter and cooler climate, on the BDCF values was evaluated. The analysis included consideration of different exposure pathway's contribution to the BDCFs. Calculations of nominal performance BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. BDCFs for the nominal performance, when combined with the concentrations of radionuclides in groundwater allow calculation of potential radiation doses to the receptor of interest. Calculated estimates of radionuclide concentration in groundwater result from the saturated zone modeling. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA) to calculate doses to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain.

Wasiolek, Maryla A.

2000-12-21T23:59:59.000Z

17

Price of Cameron, LA Natural Gas LNG Imports (Nominal Dollars...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

(Nominal Dollars per Thousand Cubic Feet) Price of Cameron, LA Natural Gas LNG Imports (Nominal Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

18

Statement from Energy Secretary Samuel W. Bodman on the Nomination...  

Energy Savers [EERE]

Nomination of Thomas P. D'Agostino as Under Secretary for Nuclear Security and Administrator of NNSA Statement from Energy Secretary Samuel W. Bodman on the Nomination of Thomas P....

19

2015 Federal Energy and Water Management Awards: Nomination Quick Reference  

Broader source: Energy.gov [DOE]

Document offers a checklist of items needed to complete a nomination for the 2015 Federal Energy and Water Management Awards.

20

FinalTestimonyLaneNominationStatement.pdf  

Broader source: Energy.gov (indexed) [DOE]

JEFF LANE, NOMINEE TO BE AN ASSISTANT JEFF LANE, NOMINEE TO BE AN ASSISTANT SECRETARY OF ENERGY, CONGRESSIONAL AND INTERGOVERNMENTAL AFFAIRS, DEPARTMENT OF ENERGY MARCH 17, 2010 Chairman Bingaman, Ranking Member Murkowski, and distinguished Members of the Committee, it is an honor and a privilege to appear before you today as President Obama's nominee for Assistant Secretary of Energy for Congressional and Intergovernmental Affairs. I want to thank Secretary Chu for recommending me to the President and thank the Committee for holding this hearing. As you consider my nomination for this position, I hope you will take into account my record, my experiences and my commitment of service to the Congress and to the important mission of the Department of Energy. I have spent most of my professional life - almost 16 years - serving in senior staff positions in

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

DOE General Counsel Nomination Announcement | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

General Counsel Nomination Announcement General Counsel Nomination Announcement DOE General Counsel Nomination Announcement March 18, 2009 - 12:00am Addthis WASHINGTON, DC - Today, President Barack Obama announced his intent to nominate the following individuals to key administration posts: Susan Burk, Special Representative of the President, with the rank of Ambassador, State Department; Raphael Bostic, Assistant Secretary for Policy Development and Research, Department of Housing and Urban Development; Michelle J. DePass, Assistant Administrator for International Affairs, Environmental Protection Agency; Cynthia J. Giles, Assistant Administrator for Enforcement and Compliance Assurance, Environmental Protection Agency; Michael L. Connor, Director, Bureau of Reclamation, Department of the Interior; Scott Blake

22

DOE Encourages Utility Sector Nominations to Commerce Department...  

Broader source: Energy.gov (indexed) [DOE]

and network reliability issues. Last week, the Department of Commerce's National Telecommunications and Information Administration announced that it is seeking nominations for its...

23

A Multiattribute Utility Analysis of Sites Nominated For Characterizat...  

Broader source: Energy.gov (indexed) [DOE]

A Multiattribute Utility Analysis of Sites Nominated For Characterization For the First Radioactive Waste Repository - A Decision Aiding Methodology A Multiattribute Utility...

24

Open Nominations Call - Energy Department Employees, Join the...  

Broader source: Energy.gov (indexed) [DOE]

Nominations Call - Energy Department Employees, Join the Women @ Energy Series Dot Harris Dot Harris Director, Office of Economic Impact and Diversity In honor of Women's...

25

DOE Encourages Utility Sector Nominations to the Federal Communication...  

Broader source: Energy.gov (indexed) [DOE]

Utility Sector Nominations to the Federal Communications Commission's Communications, Security, Reliability, and Interoperability Council March 29, 2011 - 5:22pm Addthis...

26

Microsoft Word - chvs10.html  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

7 Chevrolet S-10 Electric 7 Chevrolet S-10 Electric VEHICLE SPECIFICATIONS PURPOSE-BUILT VEHICLE Base Vehicle: 1997 Chevrolet S-10 VIN: 1GCDE14H4V80003EX Seatbelt Positions: Three Standard Features: Heat Pump Climate Control System Auxillary Diesel Fuel Fired Heater (Only operates Below 40 F) Cruise Control Tilt Steering Wheel Front Wheel Drive Power Steering Power Brakes Anti-Lock Brakes Front Disk Brakes Regenerative Braking Drivers Side Air Bags AM/FM Stereo Radio Half-Bed Tonneau Cover BATTERY Manufacturer: Delphi Energy Type: Valve Regulated Lead Acid Number of Modules: 26 Weight of Module: 19 kg Weight of Pack(s): 575 kg Pack Locations: Underbody Nominal Module Voltage: 12 V Nominal System Voltage: 312 V Nominal Capacity (C/2): 48 Ah WEIGHTS Design Curb Weight: 4300 lbs

27

NOMINATION FORM 2010 Distinguished Texan in Agriculture Award  

E-Print Network [OSTI]

NOMINATION FORM 2010 Distinguished Texan in Agriculture Award Texas A&M AgriLife The Texas A/her contributions on behalf of the Texas agricultural industry and community (information may be submitted:__________________________________________________________ ________________________________________________________________________ RETURN NOMINATIONS TO 2010 Distinguished Texan in Agriculture Selection Advisory Committee c/o Office

28

2011 NOMINATIONS REPORT As Past President of the University of Saskatchewan Alumni Association, Chair of the Nominations Committee and Chair  

E-Print Network [OSTI]

2011 NOMINATIONS REPORT As Past President of the University of Saskatchewan Alumni Association of Saskatchewan Alumni Association Board of Directors: The Nominations Committee hereby recommends of Saskatchewan Alumni Association's 95th Annual General Meeting on June 16, 2011: For one year terms to begin

Saskatchewan, University of

29

Nominate An Inspirational STEM Teacher for the Nation's Highest Honors |  

Broader source: Energy.gov (indexed) [DOE]

Nominate An Inspirational STEM Teacher for the Nation's Highest Nominate An Inspirational STEM Teacher for the Nation's Highest Honors Nominate An Inspirational STEM Teacher for the Nation's Highest Honors February 8, 2013 - 1:04pm Addthis President Barack Obama talks with Presidential Awards for Excellence in Mathematics and Science Teaching winners in the State Dining of the White House January 6, 2010. (Official White House Photo by Chuck Kennedy) President Barack Obama talks with Presidential Awards for Excellence in Mathematics and Science Teaching winners in the State Dining of the White House January 6, 2010. (Official White House Photo by Chuck Kennedy) How can I participate? The 2013 Awards will honor mathematics and science (including computer science) teachers working in grades 7-12. Nominations close on

30

A Multiattribute Utility Analysis of Sites Nominated For Characterization  

Broader source: Energy.gov (indexed) [DOE]

A Multiattribute Utility Analysis of Sites Nominated For A Multiattribute Utility Analysis of Sites Nominated For Characterization For the First Radioactive Waste Repository - A Decision Aiding Methodology A Multiattribute Utility Analysis of Sites Nominated For Characterization For the First Radioactive Waste Repository - A Decision Aiding Methodology Summary In December 1984, the Department of Energy (DOE) published draft environmental assessments (EAs) to support the proposed nomination of five sites and the recommendation of three sites for characterization for the first radioactive-waste repository. A chapter common to all the draft EAs (Chapter 7) presented rankings of the five sites against the postclosure and the preclosure technical siting guidelines. To determine which three sites appeared most favorable for recommendation for characterization,

31

Do parties still matter? : the politics of gubernatorial nominations  

E-Print Network [OSTI]

Who controls the nomination in gubernatorial elections? This dissertation seeks to answer this simple question. Parties have classically been the organizations held responsible for throwing their collective effort behind ...

Cobb, Rachael V

2006-01-01T23:59:59.000Z

32

DOE Under Secretary Nomination Announcement | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Under Secretary Nomination Announcement Under Secretary Nomination Announcement DOE Under Secretary Nomination Announcement March 12, 2009 - 12:00am Addthis WASHINGTON, DC - Today, President Barack Obama announced his intent to nominate the following individuals to key administration posts: Demetrios Marantis, Nominee for Deputy United States Trade Representative; Kristina M. Johnson, Nominee for Under Secretary of Energy; Gina McCarthy, Nominee for Assistant Administrator for Air and Radiation, Environmental Protection Agency; and Ronald H. Weich, Nominee for Assistant Attorney General, Office of Legislative Affairs, Department of Justice. President Obama said, "Each of these individuals brings a unique talent and dedication to the causes we are tackling everyday in my administration. Together they bring decades of public service and diverse backgrounds that

33

Agency Energy Coordinators for Award Nominations | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Agency Energy Coordinators for Award Nominations Agency Energy Coordinators for Award Nominations Agency Energy Coordinators for Award Nominations October 7, 2013 - 4:41pm Addthis Federal agency energy coordinators handle all nominations for the Federal Energy and Water Management Awards. Contact your agency energy coordinator well in advance of all award deadlines to learn about internal submission processes. Don Juhasz Defense Logistics Agency 703-767-3537 Jerard Butler General Services Administration 202-401-0855 Mark Ewing General Services Administration 202-708-9296 Wayne Thalasinos National Aeronautics and Space Administration 202-358-3811 Mark Sprouse National Archives and Records Administration 301-837-3019 David Hauk Smithsonian Institution 202-633-1537 Leslie Ford Social Security Administration 410-594-0111

34

4-28-09_Final_Testimony_(Triay)_(Nomination).pdf  

Broader source: Energy.gov (indexed) [DOE]

8, 2009 8, 2009 Good morning, Mr. Chairman, Senator McCain, members of the Committee. It is a great honor to appear before you today as President Obama's nominee to be the Assistant Secretary for Environmental Management at the United States Department of Energy. I thank Secretary Chu and President Obama for their support and confidence in recommending and nominating me. I also thank the Committee for considering my nomination. I would like to introduce my husband of 24 years, Dr. John Hall, and his parents Mr. and Mrs. Harvey Hall, who are with me here today. In 1961, when my parents fled Cuba's Communist regime and went into exile with a three- year-old daughter and nothing but their dreams for a better life and their love for freedom, it would have been impossible to believe that their daughter would ever be nominated by the

35

DOE Encourages Utility Sector Nominations to the Federal Communications  

Broader source: Energy.gov (indexed) [DOE]

the Federal the Federal Communications Commission's Communications, Security, Reliability, and Interoperability Council DOE Encourages Utility Sector Nominations to the Federal Communications Commission's Communications, Security, Reliability, and Interoperability Council March 29, 2011 - 5:22pm Addthis Because of the role communications technologies will play in the evolution toward a smarter national grid, DOE recommended in its October 2010 report, The Communications Requirements of Smart Grid Technologies, that members of the utility sector become more engaged in the federal advisory committees that consider key policy issues related to the Smart Grid, including the reliability of communications networks. Last week, the Federal Communications Commission announced that it is seeking nominations

36

STUDENT EMPLOYEE OF THE YEAR AWARD NOMINATION FORM  

E-Print Network [OSTI]

STUDENT EMPLOYEE OF THE YEAR AWARD NOMINATION FORM Nominees must be full-time, undergraduate, degree-seeking students and have at least one semester of employment as a student worker) for the University of Memphis as paid, student assistants. Generally student workers may be classified as "Work

Dasgupta, Dipankar

37

UNIVERSITY OF SASKATCHEWAN NOMINATION TO THE UNIVERSITY OF SASKATCHEWAN SENATE  

E-Print Network [OSTI]

UNIVERSITY OF SASKATCHEWAN NOMINATION TO THE UNIVERSITY OF SASKATCHEWAN SENATE The University of Saskatchewan Act 1995 (24.3) provides for membership on the University of Saskatchewan Senate by professional to the social, economic and cultural welfare of Saskatchewan; and (b) have a demonstrated interest in furthering

Saskatchewan, University of

38

4-23-09_Final_Nomination_Testimony_(Triay).pdf  

Broader source: Energy.gov (indexed) [DOE]

3, 2009 3, 2009 Good afternoon, Mr. Chairman, Senator Murkowski, members of the Committee. It is a great honor to appear before you today as President Obama's nominee to be the Assistant Secretary for Environmental Management at the United States Department of Energy. I thank Secretary Chu and President Obama for their support and confidence in recommending and nominating me. I also thank the Committee for considering my nomination. I would like to introduce my husband of 24 years, Dr. John Hall, and his parents Mr. and Mrs. Harvey Hall, who are with me here today. In 1961, when my parents fled Cuba's Communist regime and went into exile with a three- year-old daughter and nothing but their dreams for a better life and their love for freedom, it

39

4-23-09_Final_Nomination_Testimony_(Koonin).pdf  

Broader source: Energy.gov (indexed) [DOE]

Steven E. Koonin Steven E. Koonin Under Secretary for Science Designee Senate Committee on Energy and Natural Resources April 23, 2009 Chairman Bingaman, Senator Murkowski, members of the Committee, I am honored to appear before you as President Obama's nominee for Under Secretary for Science in the Department of Energy. With me this afternoon are my wife Laurie, who has been my companion and support for 39 years, and the second of our three children, Alyson, a junior at the University of Richmond. As you consider my nomination, I thought it would be useful for me to say something about myself beyond the bare biographical facts, something about my perceptions of Science in the Department of Energy, and about what I hope to accomplish if my nomination is confirmed.

40

Process Options for Nominal 2-K Helium Refrigeration System Designs  

SciTech Connect (OSTI)

Nominal 2-K helium refrigeration systems are frequently used for superconducting radio frequency and magnet string technologies used in accelerators. This paper examines the trade-offs and approximate performance of four basic types of processes used for the refrigeration of these technologies; direct vacuum pumping on a helium bath, direct vacuum pumping using full or partial refrigeration recovery, cold compression, and hybrid compression (i.e., a blend of cold and warm sub-atmospheric compression).

Peter Knudsen, Venkatarao Ganni

2012-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Nominal symbols and their contribution to selected Guardian essays  

E-Print Network [OSTI]

: Dr. Harry P. Kroitor Nominal symbols were commonly used in periodical essays during the seventeenth and eighteenth centuries and the Guardian, written primarily by Sir Richard Steele and Joseph Addison, is no exception. Characters... times, to eighteenth-century British essayists, the name often made the man. In the Guardian, a series of 175 essays presented by the controlling persona Nestor Ironside and written by Sir Richard Steele, Joseph Addison, and some...

Dunsford, Deborah Williams

1987-01-01T23:59:59.000Z

42

Price of Everett, MA Natural Gas LNG Imports from Egypt (Nominal...  

Gasoline and Diesel Fuel Update (EIA)

Egypt (Nominal Dollars per Thousand Cubic Feet) Price of Everett, MA Natural Gas LNG Imports from Egypt (Nominal Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3...

43

Price of Cove Point, MD Natural Gas LNG Imports from Egypt (Nominal...  

U.S. Energy Information Administration (EIA) Indexed Site

Egypt (Nominal Dollars per Thousand Cubic Feet) Price of Cove Point, MD Natural Gas LNG Imports from Egypt (Nominal Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2...

44

Price of Gulf of Mexico Natural Gas LNG Imports (Nominal Dollars...  

Gasoline and Diesel Fuel Update (EIA)

(Nominal Dollars per Thousand Cubic Feet) Price of Gulf of Mexico Natural Gas LNG Imports (Nominal Dollars per Thousand Cubic Feet) Decade Year-0 Year-1 Year-2 Year-3 Year-4...

45

PDSF Modules  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Modules Modules Modules Modules Approach to Managing The Environment Modules is a system which you can use to specify what software you want to use. If you want to use a particular software package loading its module will take care of the details of modifying your environment as necessary. The advantage of the modules approach is that the you are not required to explicitly specify paths for different executable versions and try to keep their related man paths and environment variables coordinated. Instead you simply "load" and "unload" specific modules to control your environment. Getting Started with Modules If you're using the standard startup files on PDSF then you're already setup for using modules. If the "module" command is not available, please

46

Microsoft Word - s10.html  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Chevrolet S-10 Electric Chevrolet S-10 Electric w/NiMH VEHICLE SPECIFICATIONS PURPOSE-BUILT VEHICLE Base Vehicle: 1998 S-10 VIN: 1GCDE14H1W8122580 Seatbelt Positions: Three Standard Features: Heat Pump Climate Control System Auxillary Diesel Fuel Fired Heater (Only operates Below 37°F) Cruise Control Power Steering Tilt Steering Wheel 4-wheel Anti-Lock Power Assisted Brakes Regenerative Braking Propulsion Battery Thermal Management System Driver and Passenger-Side Air Bags (w/Passenger-Side Deactivation Switch) AM/FM Stereo Radio Half-Bed Tonneau Cover BATTERY Manufacturer: Ovonic Energy Products Type: Nickel Metal Hydride Number of Modules: 26 Weight of Module: 18.3 kg Weight of Pack(s): 490.5 kg Pack Locations: Underbody Nominal Module Voltage: 13.2 V

47

Nomination & Selection Guidelines | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Nomination & Selection Guidelines Nomination & Selection Guidelines The Ernest Orlando Lawrence Award Lawrence Award Home Nomination & Selection Guidelines Award Laureates Ceremony The Life of Ernest Orlando Lawrence Contact Information The Ernest Orlando Lawrence Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-9395 E: lawrence.award@science.doe.gov Nomination & Selection Guidelines Print Text Size: A A A RSS Feeds FeedbackShare Page Jump to: Nomination Guidelines | Lawrence Award Category Descriptions | Lawrence Award Assessment Criteria, Merit Review, and Selection | Preparation of Nomination Materials | Additional Information The 2013 Ernest Orlando Lawrence Award Nomination Guidelines The Ernest Orlando Lawrence Award is bestowed by the Secretary of the U.S.

48

Module No: 410417Private International LawModule Title: Co-requisite:Nominated ContractsPre-requisite  

E-Print Network [OSTI]

and the historical development of the governing norms, the principles of investiture, the theory of adaptation, the rules of confession, the enforcement of judicial decisions and the foreign arbitration decisions in accordance with the Jordanian law for enforcing foreign decisions, the Riyadh judicial cooperation convention

49

Nomination & Selection Guidelines | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Nomination & Selection Guidelines Nomination & Selection Guidelines The Enrico Fermi Award Fermi Award Home Nomination & Selection Guidelines Award Laureates Ceremony The Life of Enrico Fermi Contact Information The Enrico Fermi Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-9395 E: fermi.award@science.doe.gov Nomination & Selection Guidelines Print Text Size: A A A RSS Feeds FeedbackShare Page Jump to: Fermi Award Assessment Criteria, Merit Review, and Selection | Preparation of Nomination Materials The 2013 Enrico Fermi Award Nomination Guidelines The Enrico Fermi Award is bestowed by the President of the United States to an individual or individuals of international stature in recognition of exceptional scientific, technical, engineering, and/or management

50

5_5_09_Daniel_Poneman_Nomination.pdf  

Broader source: Energy.gov (indexed) [DOE]

Daniel B. Poneman Daniel B. Poneman Before the Committee on Energy and Natural Resources United States Senate May 5, 2009 Chairman Bingaman, Ranking Member Murkowski, and distinguished Members of the Committee, it is an honor and a privilege to appear before you today as President Obama's nominee to be Deputy Secretary of Energy. I would like to introduce my wife of nearly 25 years, Susan, and our sons, Michael and William. Our daughter, Claire, is away at college. I am grateful and humbled by the confidence that President Obama and Secretary Chu have expressed in me through this nomination. President Obama has articulated a clear and compelling vision of America's energy future - one that will transform our economy, protect our security, and save our planet from the worst impacts of climate change.

51

Nominal and Real Effective Exchange Rate for Bosnia and Herzegovina  

Science Journals Connector (OSTI)

This paper is presenting the overview of theoretic approach to Real Effective Exchange Rate (REER) and Nominal Effective Exchange Rate (NEER) indicators calculation for Bosnia and Herzegovina. Special attention is dedicated to statistical difficulties in calculation and still limited implementation of this approach in Bosnia and Herzegovina. NEER and REER indices are indicators by themselves that BH has to work a lot to improve its competitiveness position. It is a widely known statement that a country's competitiveness improves when the relative price of its tradable goods declines. BH mostly trade with its raw materials, which are mostly natural wealth of the county like wood, coal and aluminium, so this cannot be a long-term and permanent solution for the country.

Sandra Hlivnjak

2009-01-01T23:59:59.000Z

52

President-Elect Obama Nominates Dr. Steven Chu as Energy Secretary  

Broader source: Energy.gov [DOE]

President-elect Barack Obama has nominated Dr. Steven Chu, the current director of DOE's Lawrence Berkeley National Laboratory (LBNL), to be the next Secretary of Energy.

53

La morphologie du pluriel nominal du persan daprs la thorie Whole Word Morphology.  

E-Print Network [OSTI]

??Ce mmoire prsente une tude de la morphologie de ce qui est gnralement appel le pluriel nominal du persan (parler de Thran) dans le cadre (more)

Faghiri, Pegah

2010-01-01T23:59:59.000Z

54

Developing marketing strategies for a travel destination in the USA using the nominal group technique  

Science Journals Connector (OSTI)

This paper demonstrates the application of nominal grouping as a cost-effective qualitative alternative for developing marketing strategies. The nominal group technique was used to generate strategic directions for the Blue Ridge Parkway Association, a popular travel destination in the USA. Using a nominal group composed of industry experts, a SWOT analysis produced a list of strengths, weaknesses, opportunities and threats associated with the Blue Ridge Parkway. Next, potential market segments were identified and prioritised. Five marketing strategies emerged to reach the specified market segments. The study illustrates that the nominal group technique offers a cost and time-efficient qualitative alternative in making strategic decisions.

J. Dana Clark; Michael J. Dotson; Dinesh S. Dave

2010-01-01T23:59:59.000Z

55

Module Configuration  

DOE Patents [OSTI]

A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

2002-06-04T23:59:59.000Z

56

Three-dimensional multifluid simulations of ionospheric loss at Mars from nominal solar wind conditions  

E-Print Network [OSTI]

Three-dimensional multifluid simulations of ionospheric loss at Mars from nominal solar wind (2006), Three-dimensional multifluid simulations of ionospheric loss at Mars from nominal solar wind 2006; accepted 30 June 2006; published 21 September 2006. [1] Three-dimensional multifluid simulations

Harnett , Erika

57

Open Nominations Call- Energy Department Employees, Join the Women @ Energy Series  

Broader source: Energy.gov [DOE]

We are re-opening the call for nominations of outstanding women at the Department to share their story of their STEM career and offer advice and inspiration for others to explore a future in STEM. Send in your nomination of a Department of Energy employee to annemarie.horowitz@hq.doe.gov by Friday, June 5, 2014.

58

E. O. Lawrence Award Nominations | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

E. O. E. O. Lawrence Award Nominations News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 12.04.12 E. O. Lawrence Award Nominations The Office of Science is now accepting nominations for the 2013 E. O. Lawrence Award. Print Text Size: A A A Subscribe FeedbackShare Page Call for Nominations - 2013 E. O. Lawrence Award Nominations are sought for the 2013 E. O. Lawrence Awards beginning now through May 31, 2013. The outcome of the 2012 Lawrence Awards is anticipated to be announced soon. The Ernest Orlando Lawrence Award is bestowed by the Secretary of the U.S. Department of Energy to mid-career scientists and engineers in recognition

59

Enrico Fermi Award Nominations | U.S. DOE Office of Science (SC)  

Office of Science (SC) Website

Enrico Fermi Enrico Fermi Award Nominations News Featured Articles Science Headlines 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 Presentations & Testimony News Archives Contact Information Office of Science U.S. Department of Energy 1000 Independence Ave., SW Washington, DC 20585 P: (202) 586-5430 12.04.12 Enrico Fermi Award Nominations The Office of Science is now accepting nominations for the 2013 Enrico Fermi Award. Print Text Size: A A A Subscribe FeedbackShare Page Call for Nominations - 2013 Enrico Fermi Award Nominations are sought for the 2013 Enrico Fermi Award beginning now through May 31, 2013. The outcome of the 2012 Fermi Award is anticipated to be announced soon. The Enrico Fermi Award is a Presidential award and one of the longest running and most prestigious science and technology awards given by the

60

Statement from Energy Secretary Samuel W. Bodman on the Nomination of  

Broader source: Energy.gov (indexed) [DOE]

the Nomination the Nomination of Thomas P. D'Agostino as Under Secretary for Nuclear Security and Administrator of NNSA Statement from Energy Secretary Samuel W. Bodman on the Nomination of Thomas P. D'Agostino as Under Secretary for Nuclear Security and Administrator of NNSA May 17, 2007 - 12:55pm Addthis "Today the President announced his intention to nominate Thomas P. D'Agostino as Under Secretary for Nuclear Security and Administrator of the National Nuclear Security Administration (NNSA). Tom served as NNSA's Acting Administrator for three months and as Deputy Administrator for Defense Programs for the past fourteen months. In these roles, Tom has done an outstanding job and has earned my full confidence. With this nomination, we are making NNSA even stronger and I am eager to

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

A Review Of Water Contents Of Nominally Anhydrous Natural Minerals In The  

Open Energy Info (EERE)

A Review Of Water Contents Of Nominally Anhydrous Natural Minerals In The A Review Of Water Contents Of Nominally Anhydrous Natural Minerals In The Mantles Of Earth, Mars And The Moon Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Journal Article: A Review Of Water Contents Of Nominally Anhydrous Natural Minerals In The Mantles Of Earth, Mars And The Moon Details Activities (0) Areas (0) Regions (0) Abstract: Olivine, pyroxene and garnet are nominally anhydrous but can accommodate tens to hundreds of parts per million (ppm) H2O or "water" in the form of protons incorporated in defects in their mineral structure. This review concerns the amount of water in nominally anhydrous minerals from mantle and mantle-derived rocks: peridotites, eclogites, megacrysts, basalts and kimberlites. Trends between internal and external parameters

62

U.S. Nominal Cost per Dry Well Drilled (Thousand Dollars per...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Dry Well Drilled (Thousand Dollars per Well) U.S. Nominal Cost per Dry Well Drilled (Thousand Dollars per Well) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

63

U.S. Nominal Cost per Natural Gas Well Drilled (Thousand Dollars...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Natural Gas Well Drilled (Thousand Dollars per Well) U.S. Nominal Cost per Natural Gas Well Drilled (Thousand Dollars per Well) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5...

64

U.S. Nominal Cost per Foot of Natural Gas Wells Drilled (Dollars...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Natural Gas Wells Drilled (Dollars per Foot) U.S. Nominal Cost per Foot of Natural Gas Wells Drilled (Dollars per Foot) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6...

65

U.S. Nominal Cost per Foot of Crude Oil, Natural Gas, and Dry...  

Gasoline and Diesel Fuel Update (EIA)

Oil, Natural Gas, and Dry Wells Drilled (Dollars per Foot) U.S. Nominal Cost per Foot of Crude Oil, Natural Gas, and Dry Wells Drilled (Dollars per Foot) Decade Year-0 Year-1...

66

U.S. Nominal Cost per Crude Oil Well Drilled (Thousand Dollars...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Oil Well Drilled (Thousand Dollars per Well) U.S. Nominal Cost per Crude Oil Well Drilled (Thousand Dollars per Well) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7...

67

U.S. Nominal Cost per Foot of Crude Oil Wells Drilled (Dollars...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Oil Wells Drilled (Dollars per Foot) U.S. Nominal Cost per Foot of Crude Oil Wells Drilled (Dollars per Foot) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8...

68

U.S. Nominal Cost per Crude Oil, Natural Gas, and Dry Well Drilled...  

Gasoline and Diesel Fuel Update (EIA)

Oil, Natural Gas, and Dry Well Drilled (Thousand Dollars per Well) U.S. Nominal Cost per Crude Oil, Natural Gas, and Dry Well Drilled (Thousand Dollars per Well) Decade Year-0...

69

The Psychology Society Award Nomination Form for the 2012 -2013 Academic Year  

E-Print Network [OSTI]

The Psychology Society Award Nomination Form for the 2012 - 2013 Academic Year The Psychology Society Award has been established by the students of the Psychology Society to encourage and support their fellow students

Oyet, Alwell

70

Nominations Now Open: Mid-Career Women in Clean Energy Awards  

Broader source: Energy.gov [DOE]

Nominations are now being accepted to honor mid-career women for outstanding work in clean energy. These annual awards are run by the MIT Energy Initiative (MITEI) as part of an overarching...

71

Nominations open for $250,000 Multimedia Clean Energy prizes | OpenEI  

Open Energy Info (EERE)

Nominations open for $250,000 Multimedia Clean Energy prizes Nominations open for $250,000 Multimedia Clean Energy prizes Home > Groups > Utility Rate Graham7781's picture Submitted by Graham7781(1992) Super contributor 2 October, 2012 - 13:01 American Clean Skies Foundation clean energy Energy Visions Prize OpenEI WASHINGTON, D.C. (September 27, 2012) - Representatives of the $250,000 Energy Visions Prize (EVP) competition will attend the Cleanweb Hackathons in NYC, Houston and SXSW Eco in Austin to preview innovative clean energy apps and encourage nominations. The EVP rewards innovative software and video makers who advance clean energy solutions. Based on growing national interest in the competition, the prize sponsor, the American Clean Skies Foundation (ACSF), also announced that it has extended the submission deadline until December 14, 2012.

72

U.S. Nominal Cost per Foot of Dry Wells Drilled (Dollars per...  

Annual Energy Outlook 2013 [U.S. Energy Information Administration (EIA)]

Dry Wells Drilled (Dollars per Foot) U.S. Nominal Cost per Foot of Dry Wells Drilled (Dollars per Foot) Decade Year-0 Year-1 Year-2 Year-3 Year-4 Year-5 Year-6 Year-7 Year-8 Year-9...

73

A Nominal Filter for Web Search Snippets: Using the Web to Identify Members of Latin  

E-Print Network [OSTI]

A Nominal Filter for Web Search Snippets: Using the Web to Identify Members of Latin America. This paper presents efforts aimed at using Natural Language Engineering (NLE) techniques to solve of three Latin American countries: Uruguay, Argentina and Colombia. An NLE system is under construction

Turner, William

74

DCU Research Ethics Advisers Schools and research centres nominate Research Ethics Advisers to fulfil the  

E-Print Network [OSTI]

DCU Research Ethics Advisers Schools and research centres nominate Research Ethics Advisers to fulfil the following functions in their respective units: Act as point of contact for the Research Ethics Committee, and for colleagues on research ethics issues Inform themselves on common issues of research

Humphrys, Mark

75

Formalising the -calculus using Nominal Logic Jesper Bengtson and Joachim Parrow  

E-Print Network [OSTI]

of Information Technology, University of Uppsala, Sweden Abstract. We formalise the pi-calculus using the nominal an implementation in Isabelle/HOL. The purpose is to derive powerful induction rules for the semantics in order. This is a normal strategy for manual proofs about the pi-calculus, but that kind of hand waving has previously been

Flener, Pierre

76

University of Texas Department of Biomedical Engineering Spring/Summer Admissions Required Nomination Form  

E-Print Network [OSTI]

University of Texas Department of Biomedical Engineering Spring/Summer Admissions Required, condition for admission to the UT BME Ph.D. Program in the spring or summer term. A complete and on with Application Materials: Spring Admission -- October 1 Summer Admission -- March 1 The nominating UT BME GSC

Ghosh, Joydeep

77

arXiv:1003.5447v2[cs.LO]14May2010 Relating Nominal and Higher-order  

E-Print Network [OSTI]

, nominal logic, higher-order abstract syn- tax This work has been supported by INRIA through the "Equipes]. Formalizing speci- fication based on higher-order abstract syntax requires a frame- work with devicesarXiv:1003.5447v2[cs.LO]14May2010 Relating Nominal and Higher-order Abstract Syntax Specifications

Paris-Sud XI, Université de

78

Development and Testing of the NIF Prototype Module  

SciTech Connect (OSTI)

The NIF Power Conditioning System (PCS) is required to deliver -68 kJ to each of the 3840 flashlamp pairs in the NIF laser in a current pulse with a peak of -500 kA and rise time of- 150 s. The PCS will consist of 192 modules each of which drive 20 lamp-pairs. Each module will basically be a 6 rnF capacitor bank with a nominal charge voltage of 23.5 kV which is switched by a single pressurized air gas switch to 20 RG-220 cables that are connected to individual lamp loads. In addition each module will have a number of subsystems including; a lamp pre-ionization system, power supplies, isolation circuits, trigger systems, safety dump systems, gas system, and an embedded control system. A module will also include components whose primary function is to limit fault currents and thus minimize collateral damage in faults. In the Prototype Development and Testing effort at Sandia National Laboratories all of these were integrated into a single system and proper fimctionality was demonstrated. Extensive testing was done at nominal operating levels into resistive dummy loads and some testing in fault modes was also done. A description of the system and a summary of testing is given in this paper.

Adcock, J.; Harjes, C.; Mowrer, G.; Wilson, M.

1999-06-25T23:59:59.000Z

79

Schlake et al. 09-2863 1 Automated Inspection of Railcar Underbody Structural  

E-Print Network [OSTI]

inspection system capable of detecting structural defects in freight car underframes and presents and efficient railroad operation. The structural integrity of freight cars depends on the health of certain the car body and lading and transmitting longitudinal buff and draft forces. Although railcars

Barkan, Christopher P.L.

80

TOB Module Assembly  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

SiTracker Home Page Participating Institutions and Principal Contacts Useful Links Notes Images TOB Module Assembly and Testing Project TOB Integration Data Tracker Offline DQM LHC Fluence Calculator Total US Modules Tested Graph Total US Modules Tested Graph Total US Modules Tested Total US Modules Tested US Modules Tested Graph US Modules Tested Graph US Modules Tested US Modules Tested Rod Assembly TOB Modules on a Rod TOB Rod Insertion Installation of a TOB Rod Completed TOB Completed Tracker Outer Barrel TOB Module Assembly and Testing Project All 5208 modules of the CMS Tracker Outer Barrel were assembled and tested at two production sites in the US: the Fermi National Accelerator Laboratory and the University of California at Santa Barbara. The modules were delivered to CERN in the form of rods, with the last shipment taking

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

NRELs Grid Integration Lab Nominated for Prestigious Project Management Award  

Office of Energy Efficiency and Renewable Energy (EERE)

The new Energy Systems Integration Facility (ESIF) at the Energy Departments National Renewable Energy Laboratory (NREL) received a nomination as one of three international finalists for the Project Management Institute (PMI) Project of the Year Award. Although the ESIF project team didnt take home the top honor this year, we are proud of the accomplishments they made in bringing one of the most innovative new laboratories in the country from the drawing board to fruition.

82

NERSC Modules Software Environment  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Environment » Modules Environment Environment » Modules Environment Modules Software Environment NERSC uses the module utility to manage nearly all software. There are two huge advantages of the module approach: NERSC can provide many different versions and/or installations of a single software package on a given machine, including a default version as well as several older and newer versions; and Users can easily switch to different versions or installations without having to explicitly specify different paths. With modules, the MANPATH and related environment variables are automatically managed. Users simply ``load'' and ``unload'' modules to control their environment. The module utility consists of two parts: the module command itself and the modulefiles on which it operates. Module Command

83

Modulational effects in accelerators  

SciTech Connect (OSTI)

We discuss effects of field modulations in accelerators, specifically those that can be used for operational beam diagnostics and beam halo control. In transverse beam dynamics, combined effects of nonlinear resonances and tune modulations influence diffusion rates with applied tune modulation has been demonstrated. In the longitudinal domain, applied RF phase and voltage modulations provide mechanisms for parasitic halo transport, useful in slow crystal extraction. Experimental experiences with transverse tune and RF modulations are also discussed.

Satogata, T.

1997-12-01T23:59:59.000Z

84

module 4 | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

module 4 module 4 HR5 TRANSITION BRIEFING module 4 More Documents & Publications Microsoft Word - Rev5functionalaccountabilityimplementationplan..doc Management (WFP) DEPARTMENT OF...

85

Advanced silicon photonic modulators  

E-Print Network [OSTI]

Various electrical and optical schemes used in Mach-Zehnder (MZ) silicon plasma dispersion effect modulators are explored. A rib waveguide reverse biased silicon diode modulator is designed, tested and found to operate at ...

Sorace, Cheryl M

2010-01-01T23:59:59.000Z

86

Modulating lignin in plants  

SciTech Connect (OSTI)

Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

2013-01-29T23:59:59.000Z

87

Thermoelectrics Partnership: Automotive Thermoelectric Modules...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Solution for Automotive Thermoelectric Modules Application Thermoelectrics Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces...

88

Electricity Market Module  

U.S. Energy Information Administration (EIA) Indexed Site

Market Module Market Module This page inTenTionally lefT blank 101 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2013, DOE/EIA-M068(2013). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

89

Cavity enhanced terahertz modulation  

SciTech Connect (OSTI)

We present a versatile concept for all optical terahertz (THz) amplitude modulators based on a Fabry-Prot semiconductor cavity design. Employing the high reflectivity of two parallel meta-surfaces allows for trapping selected THz photons within the cavity and thus only a weak optical modulation of the semiconductor absorbance is required to significantly damp the field within the cavity. The optical switching yields to modulation depths of more than 90% with insertion efficiencies of 80%.

Born, N., E-mail: norman.born@physik.uni-marburg.de [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States); Faculty of Physics and Material Sciences Center, Philipps-Universitt Marburg, Renthof 5, 35032 Marburg (Germany); Scheller, M.; Moloney, J. V. [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States)] [College of Optical Sciences, University of Arizona, 1630 E University Boulevard, Tucson, Arizona 85721 (United States); Koch, M. [Faculty of Physics and Material Sciences Center, Philipps-Universitt Marburg, Renthof 5, 35032 Marburg (Germany)] [Faculty of Physics and Material Sciences Center, Philipps-Universitt Marburg, Renthof 5, 35032 Marburg (Germany)

2014-03-10T23:59:59.000Z

90

NOMINATIONS INVITED The Executive Director of the Karl W. Ber Solar Energy Medal of Merit Trust, Prof. Michael T. Klein  

E-Print Network [OSTI]

NOMINATIONS INVITED · The Executive Director of the Karl W. Böer Solar Energy Medal of Merit Trust will be awarded to an individual who has made significant pioneering contributions in solar energy, wind energy to the fields of solar energy, wind energy, or other forms of renewable energy in other ways. PANEL OF JUDGES

Firestone, Jeremy

91

PUBLIC ADVISER DUTY STATEMENT The California Energy Commission shall nominate and the Governor shall appoint for a term of three  

E-Print Network [OSTI]

PUBLIC ADVISER DUTY STATEMENT The California Energy Commission shall nominate and the Governor shall appoint for a term of three years a public adviser to the Commission who shall be an attorney and the public at large is secured in the planning, site and facility certification, energy conservation

92

The Long-Run Relationship between Money, Nominal GDP, and the Price Level in Venezuela: 1950 to 1996  

E-Print Network [OSTI]

that structural breaks may be important. Since the economy depends heavily on oil revenue, oil price shocks haveThe Long-Run Relationship between Money, Nominal GDP, and the Price Level in Venezuela: 1950 and the price level in the Venezuelan economy. We apply time-series econometric techniques to annual data

Ahmad, Sajjad

93

Detailed Course Module Description  

Broader source: Energy.gov (indexed) [DOE]

Course Module Description Course Module Description Module/Learning Objectives Level of Detail in Module by Audience Consumers Gen Ed/ Community College Trades 1. Energy Issues and Building Solutions High High High Learning Objectives: * Define terms of building science, ecological systems, economics of consumption * Relate building science perspective, ecology, social science * Explain historical energy and environmental issues related to buildings * Compare Site and source energy * Examine the health, safety and comfort issues in buildings * Examine the general context for building solutions (zero energy green home with durability as the goal) * Explain a basic overview of alternative energy (total solar flux) - do we have enough energy * Examine cash flow to homeowners

94

Bracket for photovoltaic modules  

DOE Patents [OSTI]

Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

Ciasulli, John; Jones, Jason

2014-06-24T23:59:59.000Z

95

Integrated LED Headlamp Module  

Science Journals Connector (OSTI)

LED headlamp module integrates all necessary optics, electronics, and heat management into one compact unit that fits into standard mechanical headlamp frame. It provides high beam,...

Popelek, Jan

96

Module title Marketing Management Module code INT3602  

E-Print Network [OSTI]

Module title Marketing Management Module code INT3602 Academic year(s) 2013/4 Credits 15 Basic - summary of the module content Module description This module will introduce new marketing students to the fascinating world of modern marketing in an innovative and comprehensive yet practical and enjoyable way

Mumby, Peter J.

97

Working with Modules within Python  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Working with Modules within Perl and Python Working with Modules within Perl and Python Working with Modules within Perl and Python It can often be convenient to work with the modules system from within perl or python scripts. You can do this! Using Modules within Python The EnvironmentModules python package gives access to the module system from within python. The EnvironmentModules python package has a single function: module. Using this function you can provide the same arguments you would to "module" on the command line. The module() function accepts a list of arguments, like ['load','']; or ['unload','']. >>> import EnvironmentModules as EnvMod >>> EnvMod.module(['load','blast+']) It is important to understand that this is most effective for scripts

98

Membrane module assembly  

DOE Patents [OSTI]

A membrane module assembly is described which is adapted to provide a flow path for the incoming feed stream that forces it into prolonged heat-exchanging contact with a heating or cooling mechanism. Membrane separation processes employing the module assembly are also disclosed. The assembly is particularly useful for gas separation or pervaporation. 2 figures.

Kaschemekat, J.

1994-03-15T23:59:59.000Z

99

Scenarios constructed for nominal flow in the presence of a repository at Yucca Mountain and vicinity  

SciTech Connect (OSTI)

Scenario development for the system performance assessment of the Yucca Mountain Site Characterization Project defines a scenario as a well-posed problem connecting an initiating event with radionuclide release to the accessible environment by a logical and physically possible combination or sequence of features, events, and processes. Drawing on the advice and assistance of the Project`s principal investigators (PIs), a collection of release scenarios initiated by the nominal ground-water flow occurring in the vicinity of the potential Yucca Mountain high-level-waste repository is developed and described in pictorial form. This collection of scenarios is intended to provide a framework to assist PIs in recognizing essential field and calculational analyses, to assist performance assessment in providing guidance to site characterization, and to continue the effort to exhaustively identify all features, events, and processes important to releases. It represents a step in the iterative process of identifying what details of the potential site are important for safe disposal. 67 refs.

Barr, G.E.; Hunter, R.L.; Dunn, E. [Sandia National Labs., Albuquerque, NM (United States); Flint, A. [Geological Survey, Mercury, NV (United States)

1995-03-01T23:59:59.000Z

100

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and non-energy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Demand Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Demand Module calculates energy consumption for the four Census Regions (see Figure 5) and disaggregates the energy consumption

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

he International Energy Module determines changes in the world oil price and the supply prices of crude he International Energy Module determines changes in the world oil price and the supply prices of crude oils and petroleum products for import to the United States in response to changes in U.S. import requirements. A market clearing method is used to determine the price at which worldwide demand for oil is equal to the worldwide supply. The module determines new values for oil production and demand for regions outside the United States, along with a new world oil price that balances supply and demand in the international oil market. A detailed description of the International Energy Module is provided in the EIA publication, Model Documentation Report: The International Energy Module of the National Energy Modeling System, DOE/EIA-M071(06), (Washington, DC, February 2006).

102

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 15 manufacturing and 6 non-manufacturing industries. The manufacturing industries are further subdivided into the energy- intensive manufacturing industries and nonenergy-intensive manufacturing industries (Table 6.1). The manufacturing industries are modeled through the use of a detailed process-flow or end-use accounting procedure, whereas the non- manufacturing industries are modeled with substantially less detail. The petroleum refining industry is not included in the Industrial Module, as it is simulated separately in the Petroleum Market Module of NEMS. The Industrial Module calculates

103

Photovoltaic module and interlocked stack of photovoltaic modules  

DOE Patents [OSTI]

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

Wares, Brian S.

2014-09-02T23:59:59.000Z

104

Module bay with directed flow  

DOE Patents [OSTI]

A module bay requires less cleanroom airflow. A shaped gas inlet passage can allow cleanroom air into the module bay with flow velocity preferentially directed toward contaminant rich portions of a processing module in the module bay. Preferential gas flow direction can more efficiently purge contaminants from appropriate portions of the module bay, allowing a reduced cleanroom air flow rate for contaminant removal. A shelf extending from an air inlet slit in one wall of a module bay can direct air flowing therethrough toward contaminant-rich portions of the module bay, such as a junction between a lid and base of a processing module.

Torczynski, John R. (Albuquerque, NM)

2001-02-27T23:59:59.000Z

105

Optical Modulation of Molecular Conductance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Optical Modulation of Molecular Conductance Authors: Battacharyya, S., Kibel, A., Kodis, G., Liddell, P. A., Gervaldo, M., Gust, D., and Lindsay, S. Title: Optical Modulation of...

106

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2035. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA

107

Sonication standard laboratory module  

DOE Patents [OSTI]

A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

1999-01-01T23:59:59.000Z

108

Module Title: Project Module Code: OPTO6005  

E-Print Network [OSTI]

Ibsen, Dr Ping Hua, Prof James Wilkinson Contact (email ID) sm@orc.soton.ac.uk, mi@orc.soton.ac.uk, ph2@orc.soton.ac.uk, jsw@orc.soton.ac.uk Is the module subject to external accreditation? No If yes and optical labs of the ORC 3. Train in technical and hands-on research skills to gain technical insight

Anderson, Jim

109

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE  

E-Print Network [OSTI]

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE SEMRA ¨OZT¨URK KAPTANO GLU give a method to construct new restricted k[E]-modules of constant Jordan type from k[E]-modules of constant Jordan type and use it to realize several Jordan types. The constraints on the Jordan type

Kaptanoglu, Semra Ozturk

110

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE  

E-Print Network [OSTI]

RESTRICTED MODULES AND CONJECTURES FOR MODULES OF CONSTANT JORDAN TYPE SEMRA ¨OZT¨URK KAPTANO GLU Abstract. We introduce the class of restricted k[A]-modules and pt-Jordan types for a finite abelian p on Jordan types for modules of constant Jordan type when t is 1. We state conjectures giving constraints

Kaptanoglu, Semra Ozturk

111

Procedures in Modules (1) Including all procedures within modules  

E-Print Network [OSTI]

Procedures in Modules (1) Including all procedures within modules works very well in almost all designing these if possible #12;Procedures in Modules (2) These are very much like internal procedures Works very well in almost all programs Everything accessible in the module can also be used in the procedure

112

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page inTenTionally lefT blank 91 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2012, DOE/EIA-M068(2012). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

113

Liquid Fuels Market Module  

U.S. Energy Information Administration (EIA) Indexed Site

Liquid Fuels Market Module Liquid Fuels Market Module This page inTenTionally lefT blank 145 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Liquid Fuels Market Module The NEMS Liquid Fuels Market Module (LFMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, esters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the LFMM projects capacity expansion and fuel consumption at domestic refineries. The LFMM contains a linear programming (LP) representation of U.S. petroleum refining

114

Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 Residential Demand Module The NEMS Residential Demand Module projects future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimate of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the "unit energy consumption" (UEC) by appliance (in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type

115

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 95 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules-electricity capacity planning, electricity fuel dispatching, electricity load and demand, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2011, DOE/EIA-M068(2011). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most

116

Digital optical conversion module  

DOE Patents [OSTI]

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer.

Kotter, Dale K. (North Shelley, ID); Rankin, Richard A. (Ammon, ID)

1991-02-26T23:59:59.000Z

117

Digital optical conversion module  

DOE Patents [OSTI]

A digital optical conversion module used to convert an analog signal to a computer compatible digital signal including a voltage-to-frequency converter, frequency offset response circuitry, and an electrical-to-optical converter. Also used in conjunction with the digital optical conversion module is an optical link and an interface at the computer for converting the optical signal back to an electrical signal. Suitable for use in hostile environments having high levels of electromagnetic interference, the conversion module retains high resolution of the analog signal while eliminating the potential for errors due to noise and interference. The module can be used to link analog output scientific equipment such as an electrometer used with a mass spectrometer to a computer. 2 figs.

Kotter, D.K.; Rankin, R.A.

1988-07-19T23:59:59.000Z

118

Absorbance modulation optical lithography  

E-Print Network [OSTI]

In this thesis, the concept of absorbance-modulation optical lithography (AMOL) is described, and the feasibility experimentally verified. AMOL is an implementation of nodal lithography, which is not bounded by the diffraction ...

Tsai, Hsin-Yu Sidney

2007-01-01T23:59:59.000Z

119

Renewable Fuels Module This  

U.S. Energy Information Administration (EIA) Indexed Site

Fuels Module Fuels Module This page inTenTionally lefT blank 175 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources: biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind [1]. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve

120

Nonlocal Modulation of Entangled Photons  

E-Print Network [OSTI]

We consider ramifications of the use of high speed light modulators to questions of correlation and measurement of time-energy entangled photons. Using phase modulators, we find that temporal modulation of one photon of an entangled pair, as measured by correlation in the frequency domain, may be negated or enhanced by modulation of the second photon. Using amplitude modulators we describe a Fourier technique for measurement of biphoton wave functions with slow detectors.

S. E. Harris

2008-08-06T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Approved Module Information for ME2011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME2011  

E-Print Network [OSTI]

Approved Module Information for ME2011, 2014/5 Module Title/Name: Thermodynamics and Fluids Module Code: ME2011 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module in which available: BEng/MEng Mechanical Engineering. BEng/MEng Electromechanical Engineering. Available

Neirotti, Juan Pablo

122

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

4 4 The commercial module forecasts consumption by fuel 15 at the Census division level using prices from the NEMS energy supply modules, and macroeconomic variables from the NEMS Macroeconomic Activity Module (MAM), as well as external data sources (technology characterizations, for example). Energy demands are forecast for ten end-use services 16 for eleven building categories 17 in each of the nine Census divisions (see Figure 5). The model begins by developing forecasts of floorspace for the 99 building category and Census division combinations. Next, the ten end-use service demands required for the projected floorspace are developed. The electricity generation and water and space heating supplied by distributed generation and combined heat and power technologies are projected. Technologies are then

123

Macroeconomic Activity Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 19 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook2011 Macroeconomic Activity Module The Macroeconomic Activity Module (MAM) represents the interaction between the U.S. economy as a whole and energy markets. The rate of growth of the economy, measured by the growth in gross domestic product (GDP) is a key determinant of the growth in demand for energy. Associated economic factors, such as interest rates and disposable income, strongly influence various elements of the supply and demand for energy. At the same time, reactions to energy markets by the aggregate economy, such as a slowdown in economic growth resulting from increasing energy prices, are also reflected in this module.

124

Coal Market Module This  

Gasoline and Diesel Fuel Update (EIA)

51 51 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2012, DOE/EIA-M060(2012) (Washington, DC, 2012). Key assumptions Coal production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty-one separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations

125

Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 12 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 17). The Industrial Demand Module forecasts energy consumption at the four Census region level (see Figure 5); energy consumption at the Census Division level is estimated by allocating the Census region forecast using the SEDS 27 data.

126

Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

page intentionally left blank page intentionally left blank 153 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Coal Market Module The NEMS Coal Market Module (CMM) provides projections of U.S. coal production, consumption, exports, imports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2011, DOE/EIA-M060(2011) (Washington, DC, 2011). Key assumptions Coal production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the projection. Forty-one separate supply curves are developed for each of 14 supply regions, nine coal types (unique combinations

127

Power module assembly  

DOE Patents [OSTI]

A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

Campbell, Jeremy B. (Torrance, CA); Newson, Steve (Redondo Beach, CA)

2011-11-15T23:59:59.000Z

128

Floatable solar heat modules  

SciTech Connect (OSTI)

A floating solar heat module for swimming pools comprises a solid surface for conducting heat from the sun's rays to the water and further includes a solid heat storage member for continual heating even during the night. A float is included to maintain the solar heat module on the surface of the pool. The solid heat storage medium is a rolled metal disk which is sandwiched between top and bottom heat conducting plates, the top plate receiving the heat of the sun's rays through a transparent top panel and the bottom plate transferring the heat conducted through the top plate and rolled disk to the water.

Ricks, J.W.

1981-09-29T23:59:59.000Z

129

Module Handbook Specialisation Biomass Energy  

E-Print Network [OSTI]

Module Handbook Specialisation Biomass Energy 2nd Semester for the Master Programme REMA/EUREC Course 2008/2009 University of Zaragoza Specialisation Provider: Biomass Energy #12;Specialisation Biomass Energy, University of Zaragoza Modul: Introduction and Basic Concepts

Damm, Werner

130

Thermoelectrics Partnership: Automotive Thermoelectric Modules...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Partnership: Automotive Thermoelectric Modules with Scalable Thermo- and Electro-Mechanical Interfaces Novel Nanostructured Interface Solution for Automotive Thermoelectric...

131

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 23 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes world oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into

132

Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 39 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Commercial Demand Module The NEMS Commercial Sector Demand Module generates projections of commercial sector energy demand through 2035. The definition of the commercial sector is consistent with EIA's State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial.

133

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page intentionally left blank This page intentionally left blank 137 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Petroleum Market Module The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, bioesters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining activities in the five Petroleum Administration for

134

Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

page intentionally left blank page intentionally left blank 167 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for projections of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has seven submodules representing various renewable energy sources: biomass, geothermal, conventional hydroelectricity, landfill gas, solar thermal, solar photovoltaics, and wind [1]. Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as water, wind, and solar radiation, are energy sources that do not involve the

135

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

This page inTenTionally lefT blank 135 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Petroleum Market Module The NEMS Petroleum Market Module (PMM) projects petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, unfinished oil imports, other refinery inputs (including alcohols, ethers, esters, corn, biomass, and coal), natural gas plant liquids production, and refinery processing gain. In addition, the PMM projects capacity expansion and fuel consumption at domestic refineries. The PMM contains a linear programming (LP) representation of U.S. refining activities in the five Petroleum Administration for

136

Flywheel Energy Storage Module  

Broader source: Energy.gov (indexed) [DOE]

kWh/100 kW kWh/100 kW Flywheel Energy Storage Module * 100KWh - 1/8 cost / KWh vs. current State of the Art * Bonded Magnetic Bearings on Rim ID * No Shaft / Hub (which limits surface speed) * Flexible Motor Magnets on Rim ID * Develop Touch-down System for Earthquake Flying Rim Eliminate Shaft and Hub Levitate on Passive Magnetic Bearings Increase Rim Tip Speed Larger Diameter Thinner Rim Stores More Energy 4 X increase in Stored Energy with only 60% Increase in Weight Development of a 100 kWh/100 kW Flywheel Energy Storage Module High Speed, Low Cost, Composite Ring with Bore-Mounted Magnetics Current State of the Art Flywheel Limitations of Existing Flywheel * 15 Minutes of storage * Limited to Frequency Regulation Application * Rim Speed (Stored Energy) Limited by Hub Strain and Shaft Dynamics

137

International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

2 2 International Energy Module The NEMS International Energy Module (IEM) simulates the interaction between U.S. and global petroleum markets. It uses assumptions of economic growth and expectations of future U.S. and world crude-like liquids production and consumption to estimate the effects of changes in U.S. liquid fuels markets on the international petroleum market. For each year of the forecast, the NEMS IEM computes oil prices, provides a supply curve of world crude-like liquids, generates a worldwide oil supply- demand balance with regional detail, and computes quantities of crude oil and light and heavy petroleum products imported into the United States by export region. Changes in the oil price (WTI), which is defined as the price of light, low-sulfur crude oil delivered to Cushing, Oklahoma in

138

Simultaneous use of MRM (maximum rectangle method) and optimization methods in determining nominal capacity of gas engines in CCHP (combined cooling, heating and power) systems  

Science Journals Connector (OSTI)

Abstract Energy, economic, and environmental analyses of combined cooling, heating and power (CCHP) systems were performed here to select the nominal capacities of gas engines by combination of optimization algorithm and maximum rectangle method (MRM). The analysis was performed for both priority of providing electricity (PE) and priority of providing heat (PH) operation strategies. Four scenarios (SELL-PE, SELL-PH, No SELL-PE, No SELL-PH) were followed to specify design parameters such as the number and nominal power of prime movers, heating capacities of both backup boiler and energy storage tank, and the cooling capacities of electrical and absorption chillers. By defining an objective function called the Relative Annual Benefit (RAB), Genetic Algorithm optimization method was used for finding the optimal values of design parameters. The optimization results indicated that two gas engines (with nominal powers of 3780 and 3930kW) in SELL-PE scenario, two gas engines (with nominal powers of 5290 and 5300kW) in SELL-PH scenario, one gas engine (with nominal power of 2440kW) in No SELL-PE scenario provided the maximum value of the objective function. Furthermore in No SELL-PE scenario (which had the lowest RAB value in comparison with that for the above mentioned scenarios), thermal energy storage was not required. Due to very low value of RAB, any gas engine in No SELL-PH scenario was not recommended.

Sepehr Sanaye; Navid Khakpaay

2014-01-01T23:59:59.000Z

139

Detection of amplitude modulation, frequency modulation, and quasifrequency modulation by the budgerigar (Melopsittacus undulatus)  

Science Journals Connector (OSTI)

In budgerigars as in humans the detection of amplitude modulation (AM) remains relatively constant as modulation frequency increases while detection of frequency modulation(FM) improves. The point at which FM and AM are equal defines the critical modulation frequency (CMF). The CMF is approximately half the size of the critical band in humans because phase information is lost outside the critical band. At small modulation indices the power spectrum of FM is almost identical to the power spectrum of AM with the difference being the relative phase of the components. The power spectrum of quasifreqeuncy modulation (QFM) is exactly the same as AM even at high?modulation indices. In this experiment two budgerigars were trained by operant conditioning to detect AM FM and QFM at several modulation rates at three carrier frequencies. Budgerigars show nearly identical thresholds for detecting modulation in FM and QFM tones at low?modulation rates and similar thresholds for detecting modulation in FM AM and QFM tones at higher modulation rates. These results argue for an insensitivity to phase differences in budgerigars when they fall outside the frequency bandwidths of the auditory system. [Work supported by NIH Grant Nos. DC?00198 and MH?00982 to RJD.

Jian?Yu Lin; Robert J. Dooling

1997-01-01T23:59:59.000Z

140

Processing module operating methods, processing modules, and communications systems  

DOE Patents [OSTI]

A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

2014-09-09T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Metallurgy, thermal stability, and failure mode of the commercial Bi-Te-based thermoelectric modules.  

SciTech Connect (OSTI)

Bi-Te-based thermoelectric (TE) alloys are excellent candidates for power generation modules. We are interested in reliable TE modules for long-term use at or below 200 C. It is known that the metallurgical characteristics of TE materials and of interconnect components affect the performance of TE modules. Thus, we have conducted an extensive scientific investigation of several commercial TE modules to determine whether they meet our technical requirements. Our main focus is on the metallurgy and thermal stability of (Bi,Sb){sup 2}(Te,Se){sup 3} TE compounds and of other materials used in TE modules in the temperature range between 25 C and 200 C. Our study confirms the material suite used in the construction of TE modules. The module consists of three major components: AlN cover plates; electrical interconnects; and the TE legs, P-doped (Bi{sub 8}Sb{sub 32})(Te{sub 60}) and N-doped (Bi{sub 37}Sb{sub 3})(Te{sub 56}Se{sub 4}). The interconnect assembly contains Sn (Sb {approx} 1wt%) solder, sandwiched between Cu conductor with Ni diffusion barriers on the outside. Potential failure modes of the TE modules in this temperature range were discovered and analyzed. The results show that the metallurgical characteristics of the alloys used in the P and N legs are stable up to 200 C. However, whole TE modules are thermally unstable at temperatures above 160 C, lower than the nominal melting point of the solder suggested by the manufacture. Two failure modes were observed when they were heated above 160 C: solder melting and flowing out of the interconnect assembly; and solder reacting with the TE leg, causing dimensional swelling of the TE legs. The reaction of the solder with the TE leg occurs as the lack of a nickel diffusion barrier on the side of the TE leg where the displaced solder and/or the preexisting solder beads is directly contact the TE material. This study concludes that the present TE modules are not suitable for long-term use at temperatures above 160 C due to the reactivity between the Sn-solder and the (Bi,Sb){sup 2}(Te,Se){sup 3} TE alloys. In order to deploy a reliable TE power generator for use at or below 200 C, alternate interconnect materials must be used and/or a modified module fabrication technique must be developed.

Yang, Nancy Y. C.; Morales, Alfredo Martin

2009-02-01T23:59:59.000Z

142

Hilbert von Neumann modules  

E-Print Network [OSTI]

We introduce a way of regarding Hilbert von Neumann modules as spaces of operators between Hilbert space, not unlike [Skei], but in an apparently much simpler manner and involving far less machinery. We verify that our definition is equivalent to that of [Skei], by verifying the `Riesz lemma' or what is called `self-duality' in [Skei]. An advantage with our approach is that we can totally side-step the need to go through $C^*$-modules and avoid the two stages of completion - first in norm, then in the strong operator topology - involved in the former approach. We establish the analogue of the Stinespring dilation theorem for Hilbert von Neumann bimodules, and we develop our version of `internal tensor products' which we refer to as Connes fusion for obvious reasons. In our discussion of examples, we examine the bimodules arising from automorphisms of von Neumann algebras, verify that fusion of bimodules corresponds to composition of automorphisms in this case, and that the isomorphism class of such a bimodule...

Bikram, Panchugopal; Srinivasan, R; Sunder, V S

2011-01-01T23:59:59.000Z

143

Klystron Modulator Design for the Los Alamos Neutron Science Center Accelerator  

SciTech Connect (OSTI)

This paper will describe the design of the 44 modulator systems that will be installed to upgrade the Los Alamos Neutron Science Center (LANSCE) accelerator RF system. The klystrons can operate up to 86 kV with a nominal 32 Amp beam current with a 120 Hz repetition rate and 15% duty cycle. The klystrons are a mod-anode design. The modulator is designed with analog feedback control to ensure the klystron beam current is flat-top regulated. To achieve fast switching while maintaining linear feedback control, a grid-clamp, totem-pole modulator configuration is used with an 'on' deck and an 'off' deck. The on and off deck modulators are of identical design and utilize a cascode connected planar triode, cathode driven with a high speed MOSFET. The derived feedback is connected to the planar triode grid to enable the flat-top control. Although modern design approaches suggest solid state designs may be considered, the planar triode (Eimac Y-847B) is very cost effective, is easy to integrate with the existing hardware, and provides a simplified linear feedback control mechanism. The design is very compact and fault tolerant. This paper will review the complete electrical design, operational performance, and system characterization as applied to the LANSCE installation.

Reass, William A. [Los Alamos National Laboratory; Baca, David M. [Los Alamos National Laboratory; Partridge, Edward R. [retired; Rees, Daniel E. [Los Alamos National Laboratory

2012-06-22T23:59:59.000Z

144

Photovoltaic concentrator module improvements study  

SciTech Connect (OSTI)

This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

Levy, S.L.; Kerschen, K.A. (Black and Veatch, Kansas City, MO (United States)); Hutchison, G. (Solar Kinetics, Inc., Dallas, TX (United States)); Nowlan, M.J. (Spire Corp., Bedford, MA (United States))

1991-08-01T23:59:59.000Z

145

Approved Module Information for ME2501, 2014/5 Module Title/Name: Design for Use Module Code: ME2501  

E-Print Network [OSTI]

process How to gather user data The role of creativity within engineering design. #12;Module Delivery2501 School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits and Management. BSc Transport Product Design. BEng/MEng Mechanical Engineering. BEng/MEng Electromechanical

Neirotti, Juan Pablo

146

Module Title: Metamaterials, Nanophotonics and Plasmonics Module Code: OPTO6004  

E-Print Network [OSTI]

Module lecturers Dr Nicholas Papasimakis, Dr Eric Plum, Dr Vassili A Fedotov Contact (email ID) np3@orc.soton.ac.uk; erp@orc.soton.ac.uk; vaf@orc.soton.ac.uk Is the module subject to external accreditation? No If yes

Anderson, Jim

147

Proposal for New Module Module Title: Photonic Materials  

E-Print Network [OSTI]

Information Academic Unit responsible for the module ORC Core/Compulsory/Optional Compulsory Programme, Dr. S. M. Ganapathy, Dr. G. Brambilla Contact (email ID) acp@orc.soton.ac.uk; smg@orc.soton.ac.uk; gb2@orc.soton.ac.uk Will the module be subject to external accreditation? No If yes, by which body

Southampton, University of

148

Module title Human Resource Management Module code INT3604  

E-Print Network [OSTI]

working and the positive management of conflict and cultural difference Syllabus plan Syllabus planModule title Human Resource Management Module code INT3604 Academic year(s) 2013/4 Credits 15 Basic in the context of human resource management principles and practice as currently applied within organisations

Mumby, Peter J.

149

Module Code ST2004 Module Title Applying Probability: Introduction  

E-Print Network [OSTI]

: Dekker, Kraaikamp, Lopuhaa, Meester: A Modern Introduction to Probability and Statistics, Springer,2005 Probability, 2nd ed, Cambridge, 2007 Swift, L: Mathematics and Statistics for Business, Management and FinanceModule Code ST2004 Module Title Applying Probability: Introduction Pre-requisites None ECTS 5

O'Mahony, Donal E.

150

PHILOSOPHY HONORS NOMINATION FORM The Philosophy Department offers an honors program for outstanding students in the major. Majors who have a 3.7 GPA in  

E-Print Network [OSTI]

PHILOSOPHY HONORS NOMINATION FORM The Philosophy Department offers an honors program for outstanding students in the major. Majors who have a 3.7 GPA in philosophy (3.25 overall) at the end if philosophy honors are to be awarded. Honors students are expected to maintain an average of 3.7 or better

151

Brain Research Foundation: Scientific Innovations Award in Neuroscience The Brain Research Foundation has invited Wayne State University to nominate one senior faculty member  

E-Print Network [OSTI]

Brain Research Foundation: Scientific Innovations Award in Neuroscience The Brain Research Foundation has invited Wayne State University to nominate one senior faculty member to submit a Letter the LOI, it must be opened in Adobe Acrobat). To learn more about the Brain Research Foundation, click

Finley Jr., Russell L.

152

Observation of Nonlocal Modulation with Entangled Photons  

E-Print Network [OSTI]

We demonstrate a new type of quantum mechanical correlation where phase modulators at distant locations, acting on the photons of an entangled pair, interfere to determine the apparent depth of modulation. When the modulators have the same phase, the modulation depth doubles; when oppositely phased, the modulators negate each other.

S. Sensarn; G. Y. Yin; S. E. Harris

2009-09-27T23:59:59.000Z

153

Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

other refinery inputs including alcohols, ethers, bioesters, other refinery inputs including alcohols, ethers, bioesters, natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of U.S. refining activities in the five Petroleum Area Defense Districts (PADDs) (Figure 9). The model is created by aggregating individual refineries into one linear programmming representation for each PADD. This representation provides the marginal costs of production for a number of conventional and new petroleum products. In order to interact with other NEMS modules with different regional representations, certain PMM inputs and outputs are converted from PADD regions to other regional structures and vice versa. The linear programming results are used to determine

154

Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

6, DOE/EIA- 6, DOE/EIA- M068(2006). Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are assumptions about the operations of the electricity sector and the costs of various options in each of the EMM submodules. This section describes the model parameters and assumptions used in EMM. It includes a discussion of legislation and regulations that are incorporated in EMM as well as information about the climate change action plan. The various electricity and technology cases are also described. EMM Regions The supply regions used in EMM are based on the North American Electric Reliability Council regions and

155

Photovoltaic module mounting system  

DOE Patents [OSTI]

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J.; Mittan, Margaret Birmingham; Seery, Martin N; Holland, Rodney H

2012-09-18T23:59:59.000Z

156

Photovoltaic module mounting system  

DOE Patents [OSTI]

A solar array mounting system having unique installation, load distribution, and grounding features, and which is adaptable for mounting solar panels having no external frame. The solar array mounting system includes flexible, pedestal-style feet and structural links connected in a grid formation on the mounting surface. The photovoltaic modules are secured in place via the use of attachment clamps that grip the edge of the typically glass substrate. The panel mounting clamps are then held in place by tilt brackets and/or mid-link brackets that provide fixation for the clamps and align the solar panels at a tilt to the horizontal mounting surface. The tilt brackets are held in place atop the flexible feet and connected link members thus creating a complete mounting structure.

Miros, Robert H. J. (Fairfax, CA); Mittan, Margaret Birmingham (Oakland, CA); Seery, Martin N. (San Rafael, CA); Holland, Rodney H. (Novato, CA)

2012-04-17T23:59:59.000Z

157

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity.

Rauh, R. David (Newton, MA); Goldner, Ronald B. (Lexington, MA)

1989-01-01T23:59:59.000Z

158

Light modulating device  

DOE Patents [OSTI]

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

159

Argonne's SpEC Module  

ScienceCinema (OSTI)

Jason Harper, an electrical engineer in Argonne National Laboratory's EV-Smart Grid Interoperability Center, discusses his SpEC Module invention that will enable fast charging of electric vehicles in under 15 minutes. The module has been licensed to BTCPower.

Harper, Jason

2014-06-05T23:59:59.000Z

160

Hierarchical classification of modulation signals  

E-Print Network [OSTI]

features are extracted and used to classify 11 modulation signals plus white noise in a hierarchical fashion. The modulation signals include carrier wave (CW), AM, FM, SSB, FSK2, FSK4, PSK2, PSK4, OOK, QAM16, and QAM32. A hierarchy of classifiers...

Kim, Nam Jin

2012-06-07T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Oil and Gas Supply Module  

U.S. Energy Information Administration (EIA) Indexed Site

Oil and Gas Supply Module Oil and Gas Supply Module This page inTenTionally lefT blank 119 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides

162

Development of microstructure and irradiation hardening of Zircaloy during low dose neutron irradiation at nominally 358 C  

SciTech Connect (OSTI)

Wrought Zircaloy-2 and Zircaloy-4 were neutron irradiated at nominally 358 C in the high flux isotope reactor (HFIR) at relatively low neutron fluences between 5.8 1022 and 2.9 1025 n/m2 (E > 1 MeV). The irradiation hardening and change in microstructure were characterized following irradiation using tensile testing and examinations of microstructure using Analytical Electron Microscopy (AEM). Small increments of dose (0.0058, 0.11, 0.55, 1.08, and 2.93 1025 n/m2) were used in the range where the saturation of irradiation hardening is typically observed so that the role of microstructure evolution and hai loop formation on irradiation hardening could be correlated. An incubation dose between 5.8 1023 and 1.1 1024 n/m2 was needed for loop nucleation to occur that resulted in irradiation hardening. Increases in yield strength were consistent with previous results in this temperature regime, and as expected less irradiation hardening and lower hai loop number density values than those generally reported in literature for irradiations at 260 326 C were observed. Unlike previous lower temperature data, there is evidence in this study that the irradiation hardening can decrease with dose over certain ranges of fluence. Irradiation induced voids were observed in very low numbers in the Zircaloy-2 materials at the highest fluence.

Cockeram, Brian V [Bechtel-Bettis, Inc.; Smith, Richard W [Bechtel-Bettis, Inc.; Leonard, Keith J [ORNL; Byun, Thak Sang [ORNL; Snead, Lance Lewis [ORNL

2011-01-01T23:59:59.000Z

163

Integrated Module Heat Exchanger | Department of Energy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Module Heat Exchanger Integrated Module Heat Exchanger 2012 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting...

164

Alternative Energy Sources - An Interdisciplinary Module for...  

Broader source: Energy.gov (indexed) [DOE]

Alternative Energy Sources - An Interdisciplinary Module for Energy Education Alternative Energy Sources - An Interdisciplinary Module for Energy Education Below is information...

165

An Evaluation of the Wind Erosion Module in DUSTRAN  

SciTech Connect (OSTI)

Pacific Northwest National Laboratory (PNNL) has developed a dust transport model (DUSTRAN), which calculates atmospheric dust concentrations that result from both natural and human activity. DUSTRAN is a comprehensive dispersion modeling system, consisting of a dust-emissions module, a diagnostic meteorological model, and dispersion models that are integrated seamlessly into GIS software. DUSTRAN functions as a console application and allows the user to interactively create a release scenario and run the underlying models. We have recently had the opportunity to compare dust concentrations calculated by DUSTRAN with observations of wind erosion made on the U.S. Department of Energys Hanford Site in southeastern Washington. In this paper we describe both DUSTRANs algorithm for predicting the source strength of windblown dust and the comparison of simulated dust concentrations with data. The comparisons use observations of PM10 concentrations for three separate dust events on the Hanford Site in 2001. The dust measurements were made as part of an effort to monitor site recovery following a large range fire that occurred on the Hanford Site in 2000. The comparisons have provided both encouragement as to the practical value of the wind erosion module in DUSTRAN and examples of occasions when the simulations and observations diverge. In general, the maximum dust concentrations from the simulations and the observations for each dust event agreed closely. Because of the lack of soil moisture information, the model was run in a dry mode. However, some discrepancies between the observations and the model suggest that accounting for soil moisture should be done where possible. For low dust concentrations, DUSTRAN tends to overestimate PM10 levels. This may be a weakness in the simple form of the dust flux parameterization. It could also be a reflection of deviations of the threshold friction velocity from our nominal value of 20 cm s-1. Overall, however, we have shown DUSTRAN to be an effective tool for simulating dust events due to wind erosion.

Shaw, William J.; Allwine, K Jerry; Fritz, Brad G.; Rutz, Frederick C.; Rishel, Jeremy P.; Chapman, Elaine G.

2008-03-01T23:59:59.000Z

166

Photovoltaic solar concentrator module  

SciTech Connect (OSTI)

This invention consists of a planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation which includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor.

Chiang, C.J.

1991-05-16T23:59:59.000Z

167

Photovoltaic module with adhesion promoter  

DOE Patents [OSTI]

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

2013-10-08T23:59:59.000Z

168

Quantum modulation against electromagnetic interference  

E-Print Network [OSTI]

Periodic signals in electrical and electronic equipment can cause interference in nearby devices. Randomized modulation of those signals spreads their energy through the frequency spectrum and can help to mitigate electromagnetic interference problems. The inherently random nature of quantum phenomena makes them a good control signal. I present a quantum modulation method based on the random statistics of quantum light. The paper describes pulse width modulation schemes where a Poissonian light source acts as a random control that spreads the energy of the potential interfering signals. I give an example application for switching-mode power supplies and comment the further possibilities of the method.

Juan Carlos Garcia-Escartin

2014-11-26T23:59:59.000Z

169

Oil and Gas Supply Module  

Gasoline and Diesel Fuel Update (EIA)

1 1 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Oil and Gas Supply Module The NEMS Oil and Gas Supply Module (OGSM) constitutes a comprehensive framework with which to analyze crude oil and natural gas exploration and development on a regional basis (Figure 8). The OGSM is organized into 4 submodules: Onshore Lower 48 Oil and Gas Supply Submodule, Offshore Oil and Gas Supply Submodule, Oil Shale Supply Submodule[1], and Alaska Oil and Gas Supply Submodule. A detailed description of the OGSM is provided in the EIA publication, Model Documentation Report: The Oil and Gas Supply Module (OGSM), DOE/EIA-M063(2011), (Washington, DC, 2011). The OGSM provides crude oil and natural gas short-term supply parameters to both the Natural Gas Transmission and Distribution Module and the Petroleum

170

Photovoltaic Module Qualification Plus Testing  

SciTech Connect (OSTI)

This report summarizes a set of test methods that are in the midst of being incorporated into IEC 61215 for certification of a module design or other tests that go beyond certification to establish bankability.

Kurtz, S.; Wohlgemuth, J.; Kempe, M.; Bosco, N.; Hacke, P.; Jordan, D.; Miller, D. C.; Silverman, T. J.; Phillips, N.; Earnest, T.; Romero, R.

2013-12-01T23:59:59.000Z

171

Titel des Moduls: Schallmesstechnik und  

E-Print Network [OSTI]

Titel des Moduls: Schallmesstechnik und Signalverarbeitung (Measurement Technique and Signal. Fortgeschrittene" und/oder mit Modulen TA 2 und TA 6 "Noise and Vibration Control", "Advanced Noise and Vibration

Berlin,Technische Universität

172

Approved Module Information for CH3108, 2014/5 Module Title/Name: Polymer III Module Code: CH3108  

E-Print Network [OSTI]

Additives for Polymer Modification [Part 2]:To illustrate the role of different additives in plastics School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Credits: 20 and their effects in modifying polymer properties and performance using different modification methods

Neirotti, Juan Pablo

173

Approved Module Information for ME4504, 2014/5 Module Title/Name: Renewable Energy Module Code: ME4504  

E-Print Network [OSTI]

turbine Renewable energy system design Renewable Energy Policy: UK and international perspectives ModuleApproved Module Information for ME4504, 2014/5 Module Title/Name: Renewable Energy Module Code: ME understanding of the origins and nature of renewable energy flows and their capture and conversion into useful

Neirotti, Juan Pablo

174

Compact magnetic energy storage module  

DOE Patents [OSTI]

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module.

Prueitt, Melvin L. (Los Alamos, NM)

1994-01-01T23:59:59.000Z

175

Compact magnetic energy storage module  

DOE Patents [OSTI]

A superconducting compact magnetic energy storage module in which a plurality of superconducting toroids, each having a toroidally wound superconducting winding inside a poloidally wound superconducting winding, are stacked so that the flow of electricity in each toroidally wound superconducting winding is in a direction opposite from the direction of electrical flow in other contiguous superconducting toroids. This allows for minimal magnetic pollution outside of the module. 4 figures.

Prueitt, M.L.

1994-12-20T23:59:59.000Z

176

Arthur J. Dellinger, Sr. , nomination. Hearing before the Committee on Energy and Natural Resources, United States Senate, Ninety-Seventh Congress, Second Session, June 28, 1982  

SciTech Connect (OSTI)

A one-day confirmation hearing on the nomination of Arthur J. Dellinger, Sr. as DOE Deputy Inspector General (IG) focused on his ability and willingness to perform the duties and on his technical qualifications. The Deputy IG assists the IG in fraud detection and prevention, department audits to promote economy and efficiency, and policy recommendations. An informational statement covering his background, financial disclosure, and correspondence follows Mr. Dellinger's testimony. (DCK)

Not Available

1982-01-01T23:59:59.000Z

177

Expected dose for the nominal scenario class in the 2008 performance assessment for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada  

Science Journals Connector (OSTI)

Abstract Extensive work has been carried out by the U.S. Department of Energy (DOE) in the development of a proposed geologic repository at Yucca Mountain (YM), Nevada, for the disposal of high-level radioactive waste. In support of this development and an associated license application to the U.S. Nuclear Regulatory Commission (NRC), the DOE completed an extensive performance assessment (PA) for the proposed YM repository in 2008. This presentation describes the determination of expected (mean) dose to the reasonably maximally exposed individual (RMEI) specified in the NRC regulations for the YM repository for the nominal scenario class (i.e., under nominal or undisturbed conditions) in the 2008YM PA. The following topics are addressed: (i) properties of the nominal scenario class and the determination of dose and expected (mean) dose to the RMEI, (ii) uncertainty in dose and resultant expected (mean) dose to the RMEI, (iii) expected (mean) dose to the RMEI from individual radionuclides, and (iv) numerical stability of the sampling-based procedure used to estimate the expected (mean) dose to the RMEI. The present paper is part of a special issue of Reliability Engineering and System Safety devoted to the 2008YM PA; additional papers in the issue describe other aspects of the 2008YM PA.

J.C. Helton; C.W. Hansen; C.J. Sallaberry

2014-01-01T23:59:59.000Z

178

Apparatus for encapsulating a photovoltaic module  

DOE Patents [OSTI]

The subject inventions concern various photovoltaic module designs to protect the module from horizontal and vertical impacts and degradation of solar cell efficiency caused by moisture. In one design, a plurality of panel supports that are positioned adjacent to the upper panel in a photovoltaic module absorb vertical forces exerted along an axis perpendicular to the upper panel. Other designs employ layers of glass and tempered glass, respectively, to protect the module from vertical impacts. A plurality of button-shaped channels is used around the edges of the photovoltaic module to absorb forces applied to the module along an axis parallel to the module and direct moisture away from the module that could otherwise penetrate the module and adversely affect the cells within the module. A spacer is employed between the upper and lower panels that has a coefficient of thermal expansion substantially equivalent to the coefficient of thermal expansion of at least one of the panels.

Albright, Scot P. (El Paso, TX); Dugan, Larry M. (Boulder, CO)

1995-10-24T23:59:59.000Z

179

Development of a rules-based advisory system for detecting off-nominal behavior of spacecraft digital autopilots  

E-Print Network [OSTI]

of the Simulation Model A three-axis (roll, pitch, yaw) coupled RCS DAP simulation model has been developed in the Matlab-Simulink environment. The following modules have been included in the simulation. 1) Phase plane switching logic and spacecraft dynamic... the simulation using the second GUI shown in Figure 4. 1. In addition to the Matlab-Simulink model, a simulation model which is com- pletely independent of Matlab-Simulink and free of any graphics was also generated in the C language for use by mission...

Jung, Hee

2012-06-07T23:59:59.000Z

180

Active combustion flow modulation valve  

DOE Patents [OSTI]

A flow modulation valve has a slidably translating hollow armature with at least one energizable coil wound around and fixably attached to the hollow armature. The energizable coil or coils are influenced by at least one permanent magnet surrounding the hollow armature and supported by an outer casing. Lorentz forces on the energizable coils which are translated to the hollow armature, increase or decrease the flow area to provide flow throttling action. The extent of hollow armature translation depends on the value of current supplied and the direction of translation depends on the direction of current flow. The compact nature of the flow modulation valve combined with the high forces afforded by the actuator design provide a flow modulation valve which is highly responsive to high-rate input control signals.

Hensel, John Peter; Black, Nathaniel; Thorton, Jimmy Dean; Vipperman, Jeffrey Stuart; Lambeth, David N; Clark, William W

2013-09-24T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

The assess facility descriptor module  

SciTech Connect (OSTI)

The Facility Descriptor (Facility) module is part of the Analytic System and Software for Evaluating Safeguards and Security (ASSESS). Facility is the foundational software application in the ASSESS system for modelling a nuclear facility's safeguards and security system to determine the effectiveness against theft of special nuclear material. The Facility module provides the tools for an analyst to define a complete description of a facility's physical protection system which can then be used by other ASSESS software modules to determine vulnerability to a spectrum of insider and outsider threats. The analyst can enter a comprehensive description of the protection system layout including all secured areas, target locations, and detailed safeguards specifications. An extensive safeguard component catalog provides the reference data for calculating delay and detection performance. Multiple target locations within the same physical area may be specified, and the facility may be defined for two different operational states such as dayshift and nightshift. 6 refs., 5 figs.

Jordan, S.E.; Winblad, A.; Key, B.; Walker, S.; Renis, T.; Saleh, R.

1989-01-01T23:59:59.000Z

182

Solid-state membrane module  

DOE Patents [OSTI]

Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

Gordon, John Howard (Salt Lake City, UT); Taylor, Dale M. (Murray, UT)

2011-06-07T23:59:59.000Z

183

Progress of MICE RFCC Module  

SciTech Connect (OSTI)

Recent progress on the design and fabrication of the RFCC (RF and superconducting Coupling Coil) module for the international MICE (Muon Ionization Cooling Experiment) are reported. The MICE ionization cooling channel has two RFCC modules, each having four 201- MHz normal conducting RF cavities surrounded by one superconducting coupling coil (solenoid) magnet. The magnet is designed to be cooled by three cryocoolers. Fabrication of the RF cavities is complete; preparation for the cavity electro-polishing, low power RF measurements, and tuning are in progress at Lawrence Berkeley National Laboratory (LBNL). Fabrication of the cold mass of the first coupling coil magnet has been completed in China and the cold mass arrived at LBNL in late 2011. Preparations for testing the cold mass are currently under way at Fermilab. Plans for the RFCC module assembly and integration are being developed and are described.

Li, D.; Bowring, D.; DeMello, A.; Gourlay, S.; Green, M.; Li, N.; Niinikoski, T.; Pan, H.; Prestemon, S.; Virostek, S.; Zisman, M.; Bross, A.; Carcagno, R.; Kashikhin, V.; Sylvester, C.; Chen, A.B.; Guo, Bin; Li, Liyi; Xu, Fengyu; Cao, Y.; Sun, S.; Wang, Li; Yin, Lixin; Luo, Tianhuan; Summers, Don; Smith, B.; Radovinsky, A.; Zhukovsky, A.; Kaplan, D.

2012-05-20T23:59:59.000Z

184

Module Handbook Specialisation Wind Energy  

E-Print Network [OSTI]

of Wind Turbines Module name: Wind potential, Aerodynamics & Loading of Wind Turbines Section Classes Evaluation of Wind Energy Potential Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines Wind turbine Aerodynamics Static and dynamic Loading of Wind turbines Credit points 8 CP

Habel, Annegret

185

Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102  

E-Print Network [OSTI]

Approved Module Information for CE1102, 2014/5 Module Title/Name: Organic Chemistry for Engineers Module Code: CE1102 School: Engineering and Applied Science Module Type: Standard Module New Module chemistry. Part 2: Introduction to Laboratory Skills To enable the student to develop good practical skills

Neirotti, Juan Pablo

186

High Heat Flux Thermoelectric Module Using Standard Bulk Material...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Heat Flux Thermoelectric Module Using Standard Bulk Material High Heat Flux Thermoelectric Module Using Standard Bulk Material Presents high heat flux thermoelectric module design...

187

Hail Impact Testing on Crystalline Si Modules with Flexible Packaging...  

Broader source: Energy.gov (indexed) [DOE]

Hail Impact Testing on Crystalline Si Modules with Flexible Packaging Hail Impact Testing on Crystalline Si Modules with Flexible Packaging Presented at the PV Module Reliability...

188

Overview of the PV Module Model in PVWatts (Presentation)  

SciTech Connect (OSTI)

Overview of the PV module model. PVWatts module power estimates were compared with those using the Sandia model for three modules and data sets.

Marion, B.

2010-09-22T23:59:59.000Z

189

Approved Module Information for EE3OEL, 2014/5 Module Title/Name: Optoelectronics Module Code: EE3OEL  

E-Print Network [OSTI]

Approved Module Information for EE3OEL, 2014/5 Module Title/Name: Optoelectronics Module Code: EE3: * To provide a broad overview of updated optoelectronic principles, devices and applications. The students optoelectronic devices and their important functions for applications in optical communication, signal processing

Neirotti, Juan Pablo

190

Approved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code: ME1601  

E-Print Network [OSTI]

to apply the basic engineering principles of mechanics, solid mechanics and thermo fluids to a variety and understanding of the fundamental engineering principles of mechanics, solid mechanics and thermo-fluidsApproved Module Information for ME1601, 2014/5 Module Title/Name: Engineering Science Module Code

Neirotti, Juan Pablo

191

Approved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module Code: PD2003  

E-Print Network [OSTI]

to apply further engineering principles of mechanics, solid mechanics, energy systems and thermo-fluids and understanding of the fundamental engineering principles of mechanics, solid mechanics and thermo- fluidsApproved Module Information for PD2003, 2014/5 Module Title/Name: Engineering Principles 2 Module

Neirotti, Juan Pablo

192

New Camshaft Phaser Module for Automobile Engines  

Science Journals Connector (OSTI)

?...shows the functional scheme of the camshaft phaser module. The function components which are integrated into the module are encircled in a chain dotted line. A spring loaded piston pressure r...

Dr.-Ing. Uwe Meinig; Dipl.-Ing. (FH) Jrgen Bohner

2013-07-01T23:59:59.000Z

193

Amplitude modulation free, wide band frequency modulated oscillator  

E-Print Network [OSTI]

oscillator- - - - - ? ? - ? 3 15 ~ Iiide Bmd Frc saency Lodulator Relatively Free of A@elf tude Modulation-? ? 35 1~'i. Tank Uoltare Versus Fx~tuency or . 'evcral Loads ? - ? ? - 35 17. Screon Voltage Versus Frequency? 10. Amclitude Lodulafion Envelope... of Conventional Design- - ? 39 19 ' ~litude Ltodulation Eave" ope of !iem Design- - - ? - - ? 39 20. Tank Voltage Versus 11~-, coney of Conventisnal Design Hew Design INTRODUCTION The accurate and rapid determination and location of faults is very important...

Nelson, Dick Frank

1951-01-01T23:59:59.000Z

194

Crossed modules of racks Alissa S. Crans  

E-Print Network [OSTI]

Crossed modules of racks Alissa S. Crans Loyola Marymount University Friedrich Wagemann Universit to that of a crossed module of racks. We investigate the relation to categorified racks, namely strict 2-racks, and trunk-like objects in the category of racks, generalizing the relation between crossed modules of groups

Wagemann, Friedrich

195

Nutrient Management Module No. 15 Sustainable  

E-Print Network [OSTI]

Nutrient Management Module No. 15 Sustainable Agriculture by Ann McCauley, Soil Scientist, Clain for those wanting more in-depth information about sustainable agriculture. This module covers Rocky Mountain Source and Applications, with the focus on sustainable agriculture. Objectives After reading this module

Lawrence, Rick L.

196

Rank Modulation with Multiplicity Anxiao (Andrew) Jiang  

E-Print Network [OSTI]

Rank Modulation with Multiplicity Anxiao (Andrew) Jiang Computer Science and Eng. Dept. Texas A&M University College Station, TX 77843 yuewang@cse.tamu.edu Abstract--Rank modulation is a scheme that uses-change memories, etc. An extension of rank modulation is studied in this paper, where multiple cells can have

Jiang, Anxiao "Andrew"

197

A Stability of LCLS Linac Modulators  

SciTech Connect (OSTI)

Information concerning to a stability of LCLS RF linac modulators is allocated in this paper. In general a 'pulse-to-pulse' modulator stability (and RF phase as well) is acceptable for the LCLS commission and FEL programs. Further modulator stability improvements are possible and approaches are discussed based on our experimental results.

Decker, F.-J.; Krasnykh, A.; Morris, B.; Nguyen, M.; /SLAC

2012-06-13T23:59:59.000Z

198

Interface module for transverse energy input to dye laser modules  

DOE Patents [OSTI]

An interface module (10) for transverse energy input to dye laser modules is provided particularly for the purpose of delivering enhancing transverse energy beams (36) in the form of illumination bar (54) to the lasing zone (18) of a dye laser device, in particular to a dye laser amplifier (12). The preferred interface module (10) includes an optical fiber array (30) having a plurality of optical fibers (38) arrayed in a co-planar fashion with their distal ends (44) receiving coherent laser energy from an enhancing laser source (46), and their proximal ends (4) delivered into a relay structure (3). The proximal ends (42) of the optical fibers (38) are arrayed so as to be coplanar and to be aimed generally at a common point. The transverse energy beam array (36) delivered from the optical fiber array (30) is acted upon by an optical element array (34) to produce an illumination bar (54) which has a cross section in the form of a elongated rectangle at the position of the lasing window (18). The illumination bar (54) is selected to have substantially uniform intensity throughout.

English, Jr., Ronald E. (Tracy, CA); Johnson, Steve A. (Tracy, CA)

1994-01-01T23:59:59.000Z

199

Degradation Pathway Models for Photovoltaics Module Lifetime Performance  

E-Print Network [OSTI]

Degradation Pathway Models for Photovoltaics Module Lifetime Performance Nicholas R. Wheeler, Laura data from Underwriter Labs, featuring measurements taken on 18 identical photovoltaic (PV) modules in modules and their effects on module performance over lifetime. Index Terms--photovoltaics, statistical

Rollins, Andrew M.

200

SiC Power Module  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

R&D 100 Entry R&D 100 Entry SiC Power Module 2 R&D 100 Entry SiC Power Module Submitting OrganizatiOn Sandia National Laboratories PO Box 5800, MS 1033 Albuquerque, NM 87185-1033 USA Stanley Atcitty Phone: 505-284-2701 Fax: 505-844-2890 satcitt@sandia.gov AFFIRMATION: I affirm that all information submitted as a part of, or supplemental to, this entry is a fair and accurate representation of this product. _____________________________________ Stanley Atcitty JOint Entry Arkansas Power Electronics International, Inc.; University of Arkansas; Rohm Co., LTD.; and the Department of Energy/ Energy Storage Program. 1. 1. Arkansas Power Electronics International, Inc. 535 W. Research Center Blvd. Fayetteville, AR 72701 USA Alexander B. Lostetter, President & CEO Phone: 479-443-5759

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Modulation Field Induces Universe Rotation  

E-Print Network [OSTI]

In this paper, we consider a time dependent module field on spacetime extension without modifying commutative relation on noncommutative quantum plane. The significant idea is that $Lorentz$ symmetry is conserved in module and unmodule coordinate. We focus on the redefinition of spacetime structure without considering noncommutative bosonic gas in deforming the product between fields. Which the null vector is a vector on orthogonal $D$ dimensional $Hilbert$ spacetime. In $Riemann$ geometry, the equation of motion is deformed from an induced rotation. Particle field survives on the state composed by two theoretical assumed $null$ vectors, one is commutative, another is anticommutative. In the point of view, neutrino and photon mass are produced by its shift, the rotated effect generates a horizon in redefining particle field.

Chien Yu Chen

2008-06-30T23:59:59.000Z

202

The National Transport Code Collaboration Module Library  

Science Journals Connector (OSTI)

This paper reports on the progress in developing a library of code modules under the auspices of the National Transport Code Collaboration (NTCC). Code modules are high quality, fully documented software packages with a clearly defined interface. The modules provide a variety of functions, such as implementing numerical physics models; performing ancillary functions such as I/O or graphics; or providing tools for dealing with common issues in scientific programming such as portability of Fortran codes. Researchers in the plasma community submit code modules, and a review procedure is followed to insure adherence to programming and documentation standards. The review process is designed to provide added confidence with regard to the use of the modules and to allow users and independent reviews to validate the claims of the modules' authors. All modules include source code; clear instructions for compilation of binaries on a variety of target architectures; and test cases with well-documented input and output. All the NTCC modules and ancillary information, such as current standards and documentation, are available from the NTCC Module Library Website http://w3.pppl.gov/NTCC. The goal of the project is to develop a resource of value to builders of integrated modeling codes and to plasma physics researchers generally. Currently, there are more than 40 modules in the module library.

A.H. Kritz; G. Bateman; J. Kinsey; A. Pankin; T. Onjun; A. Redd; D. McCune; C. Ludescher; A. Pletzer; R. Andre; L. Zakharov; L. Lodestro; L.D. Pearlstein; R. Jong; W. Houlberg; P. Strand; J. Wiley; P. Valanju; H.St. John; R. Waltz; J. Mandrekas; T.K. Mau; J. Carlsson; B. Braams

2004-01-01T23:59:59.000Z

203

Approved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and  

E-Print Network [OSTI]

-requisites: Thermodynamics and Fluids (ME3011). Engineering Mathematics 2 (AM21EM). Co-requisites: None Specified ModuleApproved Module Information for ME4501, 2014/5 Module Title/Name: Computational Fluid Dynamics and Applications Module Code: ME4501 School: Engineering and Applied Science Module Type: Standard Module New

Neirotti, Juan Pablo

204

Modules over principal ideal rings  

E-Print Network [OSTI]

need to note, however, , the difference between the two types of "union" of a set of submodules N 1 of a module N, The first is the "set-theoretic union" con- sisting of representatives of all the distinct elements to be found in the Ni... ideal R, which cons1sts of the elements of the ring. Consider the subset B of R of all elements of the form ra + na, where r and a are ring ele- ments and n is an integer. If rla + nla, r2a + n2a s B, then la + nla 2 2a la r2a + la 2 = (rl - r2)a...

Vieaux, Jules Bellin

2012-06-07T23:59:59.000Z

205

Approved Module Information for BH3328, 2014/5 Module Title/Name: Psychology and Work Module Code: BH3328  

E-Print Network [OSTI]

* Organizational culture, climate, and change * Applying the Psychology of Work and Organizations The learning communication Planning and organizing Interpersonal discussion and communication Indicative Module Content

Neirotti, Juan Pablo

206

The effect of inspection error on quality and producer losses: the case of nominal-the-best type quality characteristic and rework  

Science Journals Connector (OSTI)

In this study, the effect of inspection error (IE) on quality and producer losses is investigated for a nominal-the-best type quality characteristic determined by a manufacturing process centre with a separate rework unit. The probability distribution and the first two moments of the resulting quality characteristic values are derived and used together with Markov chain models and simulation to study the quality and producer losses and the related statistics for various processes and gauge capability levels. The results of this study confirm with strong theoretical and empirical evidence that an effective way of achieving robustness to IE is to improve the process capability. This study provides benchmarks that support understanding and decision making of quality professionals. [Received 11 November 2010; Revised 3 June 2011; Revised 6 December 2011; Accepted 18 December 2011

Gülser Köksal; Aysun Ta?eli; Leman Esra Dolgun; ?nci Batmaz

2013-01-01T23:59:59.000Z

207

Definition: PV module | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: PV module Jump to: navigation, search Dictionary.png PV module A unit comprised of several PV cells, and the principal unit of a PV array; it is intended to generate direct current power under un-concentrated sunlight.[1][2] View on Wikipedia Wikipedia Definition A solar panel is a set of solar photovoltaic modules electrically connected and mounted on a supporting structure. A photovoltaic module is a packaged, connected assembly of photovoltaic cells. The solar module can be used as a component of a larger photovoltaic system to generate and supply electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions (STC), and

208

Power module assemblies with staggered coolant channels  

DOE Patents [OSTI]

A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

2013-07-16T23:59:59.000Z

209

An ultrafast carbon nanotube terahertz polarisation modulator  

SciTech Connect (OSTI)

We demonstrate ultrafast modulation of terahertz radiation by unaligned optically pumped single-walled carbon nanotubes. Photoexcitation by an ultrafast optical pump pulse induces transient terahertz absorption in nanowires aligned parallel to the optical pump. By controlling the polarisation of the optical pump, we show that terahertz polarisation and modulation can be tuned, allowing sub-picosecond modulation of terahertz radiation. Such speeds suggest potential for semiconductor nanowire devices in terahertz communication technologies.

Docherty, Callum J.; Stranks, Samuel D.; Habisreutinger, Severin N.; Joyce, Hannah J.; Herz, Laura M.; Nicholas, Robin J.; Johnston, Michael B., E-mail: m.johnston@physics.ox.ac.uk [Department of Physics, University of Oxford, Clarendon Laboratory, Parks Road, Oxford OX1 3PU (United Kingdom)

2014-05-28T23:59:59.000Z

210

In-line thermoelectric module  

DOE Patents [OSTI]

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

2000-01-01T23:59:59.000Z

211

In-Line Thermoelectric Module  

SciTech Connect (OSTI)

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an-in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions maybe perpendicular to the direction-of current flow through the module.

Pento, Robert; Marks, James E.; Staffanson, Clifford D.

1998-07-28T23:59:59.000Z

212

Photovoltaic Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

Photovoltaic Energy Technology Module Photovoltaic Energy Technology Module Jump to: navigation, search Tool Summary Name: Photovoltaic Energy Technology Module Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy, Solar Topics: Technology characterizations Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: Photovoltaic Energy Technology Module[1] Resources Portable Solar Photovoltaic Lanterns: Performance and Certification Specification, and Type Approval, ESMAP TECHNICAL PAPER 078 Testing of Storage Batteries used in Stand Alone Photovoltaic Power Systems, Test procedures and examples of test results Technical Specifications for Solar Home Systems (SHS), Rural Electrification and Renewable Energy Development (PV Component) Project

213

Frequencies Studies Applied to Photovoltaic Modules.  

E-Print Network [OSTI]

?? This master thesis proposes to study applications of frequencies studies to the case of photovoltaic modules and photovoltaic plants. Such studies are little used (more)

Miquel, Clment

2011-01-01T23:59:59.000Z

214

Solid State Marx Modulators for Emerging Applications  

SciTech Connect (OSTI)

Emerging linear accelerator applications increasingly push the boundaries of RF system performance and economics. The power modulator is an integral part of RF systems whose characteristics play a key role in the determining parameters such as efficiency, footprint, cost, stability, and availability. Particularly within the past decade, solid-state switch based modulators have become the standard in high-performance, high power modulators. One topology, the Marx modulator, has characteristics which make it particularly attractive for several emerging applications. This paper is an overview of the Marx topology, some recent developments, and a case study of how this architecture can be applied to a few proposed linear accelerators.

Kemp, M.A.; /SLAC

2012-09-14T23:59:59.000Z

215

Natural Gas Transmission and Distribution Module  

Gasoline and Diesel Fuel Update (EIA)

U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2013 Natural Gas Transmission and Distribution Module The NEMS Natural Gas Transmission and...

216

Natural Gas Transmission and Distribution Module  

U.S. Energy Information Administration (EIA) Indexed Site

31, 2012, Washington, DC Major assumption changes for AEO2013 Oil and Gas Working Group Natural Gas Transmission and Distribution Module DRAFT WORKING GROUP PRESENTATION DO NOT...

217

Multiple Layer Graphene Optical Modulator - Energy Innovation...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Materials Advanced Materials Find More Like This Return to Search Multiple Layer Graphene Optical Modulator Lawrence Berkeley National Laboratory Contact LBL About This...

218

Silicon Photonics for Modulation, Switching, and Tuning  

Science Journals Connector (OSTI)

Thermal and electro-refractive silicon photonic modulators, switches, and tunable filters have been demonstrated with ultralow switching energies and high-speed operation. These...

Watts, Michael

219

D-modules on smooth toric varieties  

E-Print Network [OSTI]

D-MODULES ON SMOOTH TORIC VARIETIES. MIRCEA MUSTAT A, GREGORY G. SMITH, HARRISON TSAI,. AND ULI WALTHER. Abstract. Let X be a smooth...

220

Encapsulation of High Temperature Thermoelectric Modules  

Broader source: Energy.gov [DOE]

Presents concept for hermetic encapsulation of TE modules addressing key failure mechanism, TE material oxidation, which severely impacts long term performance

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Detailed Course Module Description | Department of Energy  

Energy Savers [EERE]

lists the course modules for building science courses offered at Cornell's Collaborator Sustainable Buildingi Practice course. coursemodule.pdf More Documents & Publications...

222

Explosives detection with a frequency modulation spectrometer  

Science Journals Connector (OSTI)

An explosives detection instrument was designed and tested at SRI International. The instrument uses frequency modulation spectroscopy with midinfrared lead-salt diode lasers to...

Riris, H; Carlisle, C B; McMillen, D F; Cooper, D E

1996-01-01T23:59:59.000Z

223

Module Title: Solid state and ultrafast lasers Module Code: OPTO6002  

E-Print Network [OSTI]

Module lecturers Prof Andy Clarkson, Dr Bill Brocklesby Contact (email ID) wac@orc.soton.ac.uk, wsb@orc

Anderson, Jim

224

Module No: 410331International Trade LawModule Title: Pre-requisite  

E-Print Network [OSTI]

and technology transfer contracts; also, a brief study of international trade arbitration and its rulesModule No: 410331International Trade LawModule Title: Pre-requisite: Module Type: specialization Description The international trade law course is a brief study of the topics of electronic commerce

225

Modular ITT Module D Modular ITT Module D Version 1 16/02/2012  

E-Print Network [OSTI]

manage health and safety at work. Your responses should include: basic statement on safety awarenessModular ITT ­ Module D Modular ITT ­ Module D Version 1 16/02/2012 Module D ­ Health & Safety an overall failing of your bid. This section allows us to assess your competency for health and safety. We

226

AC PV Modules Take a standard DC PV module and connect a microinverter  

E-Print Network [OSTI]

modules. These inverters range in power from 700 watts up to 1 megawatt. DC maximum system voltages can and up to 13 inverters for the 210 W version to be installed on the same AC output cable. home power 136, and secure a listing to UL1741 for a pre-assembled module/inverter device, and you have an AC PV module

Johnson, Eric E.

227

Analysis and Design of Smart PV Module  

E-Print Network [OSTI]

This thesis explores the design of a smart photovoltaic (PV) module- a PV module in which PV cells in close proximity are electrically grouped to form a pixel and are connected to dc-dc converter blocks which reside embedded in the back pane...

Mazumdar, Poornima

2012-12-10T23:59:59.000Z

228

Testing Protocol for Module Encapsulant Creep (Presentation)  

SciTech Connect (OSTI)

Recently there has been an interest in the use of thermoplastic encapsulant materials in photovoltaic modules to replace chemically crosslinked materials, e.g., ethylene-vinyl acetate. The related motivations include the desire to: reduce lamination time or temperature; use less moisture-permeable materials; or use materials with better corrosion characteristics. However, the use of any thermoplastic material in a high-temperature environment raises safety and performance concerns, as the standardized tests currently do not expose the modules to temperatures in excess of 85C, yet modules may experience temperatures above 100C in operation. Here we constructed eight pairs of crystalline-silicon modules and eight pairs of glass/encapsulation/glass mock modules using different encapsulation materials of which only two were designed to chemically crosslink. One module set was exposed outdoors with insulation on the back side in Arizona in the summer, and an identical set was exposed in environmental chambers. High precision creep measurements and performance measurements indicate that despite many of these polymeric materials being in the melt state at some of the highest outdoor temperatures achievable, very little creep was seen because of their high viscosity, temperature heterogeneity across the modules, and in the case of the crystalline-silicon modules, the physical restraint of the backsheet. These findings have very important implications for the development of IEC and UL qualification and safety standards, and in regards to the necessary level of cure during the processing of crosslinking encapsulants.

Kempe, M. D.; Miller, D. C.; Wohlgemuth, J. H.; Kurtz, S. R.; Moseley, J. M.; Shah, Q.; Tamizhmani, G.; Sakurai, K.; Inoue, M.; Doi, T.; Masuda, A.

2012-02-01T23:59:59.000Z

229

Nutrient Management Module No. 12 Water Quality  

E-Print Network [OSTI]

Nutrient Management Module No. 12 Water Quality Considerations and Regulations by Susan Mc Management Competency Area II: Nutrient movement in soil and water. Objectives After completing this module issues 3.Become familiar with federal and state water quality regulations 4.Identify Best Management

Lawrence, Rick L.

230

Identification coding schemes for modulated reflectance systems  

DOE Patents [OSTI]

An identifying coding apparatus employing modulated reflectance technology involving a base station emitting a RF signal, with a tag, located remotely from the base station, and containing at least one antenna and predetermined other passive circuit components, receiving the RF signal and reflecting back to the base station a modulated signal indicative of characteristics related to the tag.

Coates, Don M. (Santa Fe, NM); Briles, Scott D. (Los Alamos, NM); Neagley, Daniel L. (Albuquerque, NM); Platts, David (Santa Fe, NM); Clark, David D. (Santa Fe, NM)

2006-08-22T23:59:59.000Z

231

Workplace Training Module: Enhancing Ecotourism Business Performance  

E-Print Network [OSTI]

Workplace Training Module: Enhancing Ecotourism Business Performance (Level 5 ­ 10 credits as part on understanding best practice in ecotourism development and management (see second part of Appendix 1). The module focuses on the ecotourism business dimension ­ emphasizing best case examples of what creates successful

232

Electro-Optic Modulation of Single Photons  

E-Print Network [OSTI]

We use the Stokes photon of a biphoton pair to set the time origin for electro-optic modulation of the wave function of the anti-Stokes photon thereby allowing arbitrary phase and amplitude modulation. We demonstrate conditional single-photon wave functions composed of several pulses, or instead, having gaussian or exponential shapes.

Pavel Kolchin; Chinmay Belthangady; Shengwang Du; G. Y. Yin; S. E. Harris

2008-08-02T23:59:59.000Z

233

Module Handbook Core Univ. of Oldenburg  

E-Print Network [OSTI]

· Mechanical and Electrical Systems of the WEC Content: Energy conversion process in Wind Turbines · Wind/EUREC Course 2008/2009 #12;EUREC Core Courses at University of Oldenburg, 1st Semester Wind Energy Module Module Description: Wind Energy Field: Core Oldenburg Courses: Wind Energy Wind Energy

Habel, Annegret

234

Raising the Bar for Quality PV Modules  

Office of Energy Efficiency and Renewable Energy (EERE)

Since the development and codification of testing standards for PV modules requires a lengthy multiyear process, Department of Energys SunShot Initiative and National Renewable Energy Laboratory worked together on an accelerated schedule for nine months in 2013 to develop a voluntary standard that goes beyond current test protocols to qualify superior PV modules.

235

Ion transport membrane module and vessel system  

DOE Patents [OSTI]

An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel. The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); Van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

2012-02-14T23:59:59.000Z

236

Ion transport membrane module and vessel system  

DOE Patents [OSTI]

An ion transport membrane system comprising (a) a pressure vessel having an interior, an exterior, an inlet, and an outlet; (b) a plurality of planar ion transport membrane modules disposed in the interior of the pressure vessel and arranged in series, each membrane module comprising mixed metal oxide ceramic material and having an interior region and an exterior region, wherein any inlet and any outlet of the pressure vessel are in flow communication with exterior regions of the membrane modules; and (c) one or more gas manifolds in flow communication with interior regions of the membrane modules and with the exterior of the pressure vessel.The ion transport membrane system may be utilized in a gas separation device to recover oxygen from an oxygen-containing gas or as an oxidation reactor to oxidize compounds in a feed gas stream by oxygen permeated through the mixed metal oxide ceramic material of the membrane modules.

Stein, VanEric Edward (Allentown, PA); Carolan, Michael Francis (Allentown, PA); Chen, Christopher M. (Allentown, PA); Armstrong, Phillip Andrew (Orefield, PA); Wahle, Harold W. (North Canton, OH); Ohrn, Theodore R. (Alliance, OH); Kneidel, Kurt E. (Alliance, OH); Rackers, Keith Gerard (Louisville, OH); Blake, James Erik (Uniontown, OH); Nataraj, Shankar (Allentown, PA); van Doorn, Rene Hendrik Elias (Obersulm-Willsbach, DE); Wilson, Merrill Anderson (West Jordan, UT)

2008-02-26T23:59:59.000Z

237

A Comparison of Key PV Backsheet and Module Properties from Fielded...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Key PV Backsheet and Module Properties from Fielded Module Exposures and Accelerated Test Conditions A Comparison of Key PV Backsheet and Module Properties from Fielded Module...

238

A Graphene-based Polarization-Insensitive Optical Modulator  

Science Journals Connector (OSTI)

We present a polarization-insensitive modulator. The performance of the designed modulator is comprehensively evaluated, showing a 3-dB modulation with 910-nm long waveguide, an...

hu, xiao; Gui, Chengcheng; Wang, Jian

239

CHARGED PARTICLE IDENTIFICATION WITH MODULES OF THE PLASTIC BALL  

E-Print Network [OSTI]

WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier,WITH MODULES OF THE PLASTIC BALL H.H. Gutbrod, M.R. Maier*,of modules of the Plastic Ball detector for positive pions

Gutbrod, H.H.

2010-01-01T23:59:59.000Z

240

Approved Module Information for EE2EDP, 2014/5 Module Title/Name: Electronics Design Project Module Code: EE2EDP  

E-Print Network [OSTI]

Code: EE2EDP School: Engineering and Applied Science Module Type: Standard Module New Module? No Module Engineering Systems. BEng Electrical and Electronic Engineering. BEng Electronic Engineering and Computer competition among the groups to produce a 'best' system. * Students will be required to use creativity

Neirotti, Juan Pablo

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Criticality Calculations for Step?2 GPHS Modules  

Science Journals Connector (OSTI)

The Multi?Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version referred to as the Step?2 GPHS Module has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of 238 Pu in the oxide form as the primary source of heat and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step?2 version. The Monte Carlo N?Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand the configuration is extremely sub?critical; k eff is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close?spaced stack to approach criticality ( k eff ?=?1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Ronald J. Lipinski; Danielle L. Hensen

2008-01-01T23:59:59.000Z

242

Criticality Calculations for Step-2 GPHS Modules  

SciTech Connect (OSTI)

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Lipinski, Ronald J. [Advanced Nuclear Concepts Department, Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States); Hensen, Danielle L. [Risk and Reliability Department Sandia National Laboratories, P.O Box 5800, Albuquerque, NM 87185 (United States)

2008-01-21T23:59:59.000Z

243

Criticality calculations for Step-2 GPHS modules.  

SciTech Connect (OSTI)

The Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) will use an improved version of the General Purpose Heat Source (GPHS) module as its source of thermal power. This new version, referred to as the Step-2 GPHS Module, has additional and thicker layers of carbon fiber material (Fine Weaved Pierced Fabric) for increased strength over the original GPHS module. The GPHS uses alpha decay of {sup 238}Pu in the oxide form as the primary source of heat, and small amounts of other actinides are also present in the oxide fuel. Criticality calculations have been performed by previous researchers on the original version of the GPHS module (Step 0). This paper presents criticality calculations for the present Step-2 version. The Monte Carlo N-Particle eXtended code (MCNPX) was used for these calculations. Numerous configurations of GPHS module arrays surrounded by wet sand and other materials (to reflect the neutrons back into the stack with minimal absorption) were modeled. For geometries with eight GPHS modules (from a single MMRTG) surrounded by wet sand, the configuration is extremely sub-critical; k{sub eff} is about 0.3. It requires about 1000 GPHS modules (from 125 MMRTGs) in a close-spaced stack to approach criticality (k{sub eff} = 1.0) when surrounded by wet sand. The effect of beryllium in the MMRTG was found to be relatively small.

Hensen, Danielle Lynn; Lipinski, Ronald J.

2007-08-01T23:59:59.000Z

244

Tematea: Issue Based Modules for Coherent Implementation of Biodiversi...  

Open Energy Info (EERE)

Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Conventions Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Tematea: Issue Based Modules for...

245

Agenda for the PV Module Reliability Workshop, February 26 -...  

Broader source: Energy.gov (indexed) [DOE]

Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado Agenda for the PV Module Reliability Workshop, February 26 - 27 2013, Golden, Colorado This...

246

NREL: Performance and Reliability R&D - PV Module Reliability...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Reliability R and D Printable Version PV Module Reliability Workshop NREL hosts an annual Photovoltaic Module Reliability Workshop (PVMRW) so that solar technology experts can...

247

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_ROTATION...  

Broader source: Energy.gov (indexed) [DOE]

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialROTATIONWITHINDUSTRY.doc...

248

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_ESTABLISHI...  

Broader source: Energy.gov (indexed) [DOE]

ESTABLISHINGAPROFILE.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialESTABLISHINGAPROFILE.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS...

249

Energy Efficiency at Home - An Interdisciplinary Module for Energy...  

Broader source: Energy.gov (indexed) [DOE]

Efficiency at Home - An Interdisciplinary Module for Energy Education Energy Efficiency at Home - An Interdisciplinary Module for Energy Education Below is information about the...

250

SunShot Presentation PV Module Reliabity Workshop Opening Session...  

Broader source: Energy.gov (indexed) [DOE]

SunShot Presentation PV Module Reliabity Workshop Opening Session SunShot Presentation PV Module Reliabity Workshop Opening Session This PowerPoint slide deck was originally...

251

SunShot Presentation PV Module Reliabity Workshop Opening Session  

Broader source: Energy.gov (indexed) [DOE]

2013 PV Module Reliability Workshop Feb 26- 27, 2013, Golden, CO * The SunShot Initiative * Systems Integration Technology Validation Activities * 2013 PV Module Reliability...

252

Module: Emission Factors for Deforestation | Open Energy Information  

Open Energy Info (EERE)

Website: www.leafasia.orgtoolstechnical-guidance-series-emission-factors-defo Cost: Free Language: English Module: Emission Factors for Deforestation Screenshot Logo: Module:...

253

Module: Activity Data for Deforestation | Open Energy Information  

Open Energy Info (EERE)

Website: www.leafasia.orgtoolstechnical-guidance-series-activity-data-defores Cost: Free Language: English Module: Activity Data for Deforestation Screenshot Logo: Module:...

254

Chirped Laser Dispersion Spectroscopy with Directly Modulated Quantum Cascade Laser  

Science Journals Connector (OSTI)

A feasibility study of chirped laser dispersion spectroscopy (CLaDS) with utilizing direct modulation of a quantum cascade laser instead of external modulators is presented....

Hangauer, Andreas; Spinner, Georg; Nikodem, Michal; Wysocki, Gerard

255

EXPERIENCES ON PID TESTING OF PV MODULES IN 2012 | Department...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Glass Potential Induced Degradation (PID) Tests for Commercially Available PV Modules Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells...

256

Characterization of Dynamic Loads on Solar Modules with Respect...  

Broader source: Energy.gov (indexed) [DOE]

Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar Cells Characterization of Dynamic Loads on Solar Modules with Respect to Fracture of Solar...

257

Statistical and Domain Analytics Applied to PV Module Lifetime...  

Broader source: Energy.gov (indexed) [DOE]

on PV Modules Failure Rates from Certification Testing to UL and IEC Standards for Flat Plate PV Modules Accelerated Stress Testing, Qualification Testing, HAST, Field Experience...

258

PSCAD Modules Representing PV Generator  

SciTech Connect (OSTI)

Photovoltaic power plants (PVPs) have been growing in size, and the installation time is very short. With the cost of photovoltaic (PV) panels dropping in recent years, it can be predicted that in the next 10 years the contribution of PVPs to the total number of renewable energy power plants will grow significantly. In this project, the National Renewable Energy Laboratory (NREL) developed a dynamic modeling of the modules to be used as building blocks to develop simulation models of single PV arrays, expanded to include Maximum Power Point Tracker (MPPT), expanded to include PV inverter, or expanded to cover an entire PVP. The focus of the investigation and complexity of the simulation determines the components that must be included in the simulation. The development of the PV inverter was covered in detail, including the control diagrams. Both the current-regulated voltage source inverter and the current-regulated current source inverter were developed in PSCAD. Various operations of the PV inverters were simulated under normal and abnormal conditions. Symmetrical and unsymmetrical faults were simulated, presented, and discussed. Both the three-phase analysis and the symmetrical component analysis were included to clarify the understanding of unsymmetrical faults. The dynamic model validation was based on the testing data provided by SCE. Testing was conducted at SCE with the focus on the grid interface behavior of the PV inverter under different faults and disturbances. The dynamic model validation covers both the symmetrical and unsymmetrical faults.

Muljadi, E.; Singh, M.; Gevorgian, V.

2013-08-01T23:59:59.000Z

259

Planar photovoltaic solar concentrator module  

DOE Patents [OSTI]

A planar photovoltaic concentrator module for producing an electrical signal from incident solar radiation includes an electrically insulating housing having a front wall, an opposing back wall and a hollow interior. A solar cell having electrical terminals is positioned within the interior of the housing. A planar conductor is connected with a terminal of the solar cell of the same polarity. A lens forming the front wall of the housing is operable to direct solar radiation incident to the lens into the interior of the housing. A refractive optical element in contact with the solar cell and facing the lens receives the solar radiation directed into the interior of the housing by the lens and directs the solar radiation to the solar cell to cause the solar cell to generate an electrical signal. An electrically conductive planar member is positioned in the housing to rest on the housing back wall in supporting relation with the solar cell terminal of opposite polarity. The planar member is operable to dissipate heat radiated by the solar cell as the solar cell generates an electrical signal and further forms a solar cell conductor connected with the solar cell terminal to permit the electrical signal generated by the solar cell to be measured between the planar member and the conductor. 5 figs.

Chiang, C.J.

1992-12-01T23:59:59.000Z

260

Modulated voltage metastable ionization detector  

SciTech Connect (OSTI)

Metastable ionization detectors used for chromatographic analysis usually employa fixed high voltage for the ionization potential. For this reason, the operating range is limited to about three orders of magnitude. By use of the technique disclosed in the instant invention, operating ranges of about nine orders of magnitude are obtained. The output current from a metastable ionization detector (MID) is applied to a modulation voltage circuit. An adjustment is made to balance out the background current, and an output current, above background, is applied to an input of a strip chart recorder. For low level concentrations, i.e., low detected output current, the ionization potential will be at a maximum and the metastable ionization detector will operate at its most sensitive level. When the detected current from the metastable ionization detector increases above a predetermined threshold level, a voltage control circuit is activated which turns on a high voltage transistor which acts to reduce the ionization potential. The ionization potential applied to the metastable ionization detector is then varied so as to maintain the detected signal level constant. The variation in ionization potential is now related to the concentration fo the constituent and a representative amplitude is applied to another input of said strip chart recorder.

Carle, G. C.; Humphry, D. E.; Kojiro, D. R.

1985-08-27T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Approved Module Information for CE2004, 2014/5 Module Title/Name: Transfer Processes Module Code: CE2004  

E-Print Network [OSTI]

tubes. Natural convection from pipes. Thermal radiation fundamentals, view factors, radiation exchange classes, directed reading, coursework exercises, tutorial support Module Assessment Methods of Assessment & associated weighting (including approaches to formative assessment as well as summative): Assessment Type

Neirotti, Juan Pablo

262

Approved Module Information for CE2105, 2014/5 Module Title/Name: Process Simulation Module Code: CE2105  

E-Print Network [OSTI]

the program to processes in chemicals manufacturing, power generation and petrochemical refining skills #12;* Ability to communicate effectively in writing and through technical diagrams * Problem reading, coursework exercises, tutorial support Module Assessment Methods of Assessment & associated

Neirotti, Juan Pablo

263

Approved Module Information for BH2239, 2014/5 Module Title/Name: Psychology and Work Module Code: BH2239  

E-Print Network [OSTI]

culture, climate, and change * Applying the Psychology of Work and Organizations The learning outcomes * Academic writing skills * Critical reasoning * Written and oral communication * Planning and organizing * Interpersonal discussion and communication Indicative Module Content: * Introduction to Work and Organizational

Neirotti, Juan Pablo

264

Microscale autonomous sensor and communications module  

DOE Patents [OSTI]

Various technologies pertaining to a microscale autonomous sensor and communications module are described herein. Such a module includes a sensor that generates a sensor signal that is indicative of an environmental parameter. An integrated circuit receives the sensor signal and generates an output signal based at least in part upon the sensor signal. An optical emitter receives the output signal and generates an optical signal as a function of the output signal. An energy storage device is configured to provide power to at least the integrated circuit and the optical emitter, and wherein the module has a relatively small diameter and thickness.

Okandan, Murat; Nielson, Gregory N

2014-03-25T23:59:59.000Z

265

Amplitude modulation of wind turbine noise  

E-Print Network [OSTI]

Due to swish and thump amplitude modulation, the noise of wind turbines cause more annoyance than other environmental noise of the same average level. The wind shear accounts for the thump modulation (van den Berg effect). Making use of the wind speed measurements at the hub height, as well as at the top and the bottom of the rotor disc (Fig.1), the non-standard wind profile is applied. It causes variations in the A-weighted sound pressure level, LpA. The difference between the maximum and minimum of LpA characterizes thump modulation (Fig.2).

Makarewicz, Rufin

2013-01-01T23:59:59.000Z

266

Uncertainty and sensitivity analysis for the nominal scenario class in the 2008 performance assessment for the proposed high-level radioactive waste repository at Yucca Mountain, Nevada  

Science Journals Connector (OSTI)

Abstract Extensive work has been carried out by the U.S. Department of Energy (DOE) in the development of a proposed geologic repository at Yucca Mountain (YM), Nevada, for the disposal of high-level radioactive waste. In support of this development and an associated license application to the U.S. Nuclear Regulatory Commission (NRC), the DOE completed an extensive performance assessment (PA) for the proposed YM repository in 2008. This presentation describes uncertainty and sensitivity analysis results for the nominal scenario class (i.e., for undisturbed conditions) obtained in the 2008 YM PA. The following topics are addressed: (i) uncertainty and sensitivity analysis procedures, (ii) drip shield and waste package failure, (iii) engineered barrier system conditions, (iv) radionuclide release results for the engineered barrier system, unsaturated zone, and saturated zone, and (v) dose to the reasonably maximally exposed individual specified in the NRC regulations for the YM repository. The present article is part of a special issue of Reliability Engineering and System Safety devoted to the 2008 YM PA; additional articles in the issue describe other aspects of the 2008 YM PA.

C.W. Hansen; G.A. Behie; A. Bier; K.M. Brooks; Y. Chen; J.C. Helton; S.P. Hommel; K.P. Lee; B. Lester; P.D. Mattie; S. Mehta; S.P. Miller; C.J. Sallaberry; S.D. Sevougian; P. Vo

2014-01-01T23:59:59.000Z

267

The role of pe, pH, and carbonate on the solubility of UO{sub 2} and uraninite under nominally reducing conditions  

SciTech Connect (OSTI)

Experimental data obtained from uranium dioxide solubility studies as a function of pH and under nominally reducing conditions in a 0.008 mol/dm{sup 3} perchlorate medium and in a 1 mol/dm{sup 3} chloride solution are presented. The solubility of extensively characterized uraninite samples from Cigar Lake (Canada), Jachymov (Czech Republic), and Oklo (Gabon) was determined in a solution matching the composition of a groundwater associated with granitic terrain. The redox potential of the test solution was monitored throughout the experimental period. The results obtained were modeled using aqueous formation constants compiled by the NEA, using stability constants corrected to appropriate ionic strengths. A lower value of the solubility product of the uranium dioxide phase defined as fuel in the SKB uranium database provides reasonable solubilities for a wide span of experimental results at near to neutral pH. Differences in solubility between natural and synthetic samples are attributed to the presence of carbonate in the experiments performed with uraninites, while differences in solubility observed among the natural samples can be correlated to radiation effects at atomic scale.

Casas, I.; Pablo, J. de; Gimenez, J.; Torrero, M.E. [Polytechnic Univ. of Catalunya, Barcelona (Spain). Dept. of Chemical Engineering] [Polytechnic Univ. of Catalunya, Barcelona (Spain). Dept. of Chemical Engineering; Bruno, J.; Cera, E. [QuantiSci SL, Cerdanyola (Spain)] [QuantiSci SL, Cerdanyola (Spain); Finch, R.J.; Ewing, R.C. [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Earth and Planetary Sciences] [Univ. of New Mexico, Albuquerque, NM (United States). Dept. of Earth and Planetary Sciences

1998-07-01T23:59:59.000Z

268

SHARP Physics Modules Updated | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Physics Modules Updated Physics Modules Updated SHARP Physics Modules Updated January 29, 2013 - 12:37pm Addthis PROTEUS Development The SHARP neutronics module, PROTEUS, includes neutron and gamma transport solvers, cross-section processing tools, and tools for depletion and fuel cycle analysis. Efforts in the second quarter focused on three major priorities: multi-physics integration, intermediate-fidelity tool development, and demonstrations of applicability. Integration of the second-order, discrete ordinates (Sn method) solver of PROTEUS with the latest version of the MOAB framework (which represents and evaluates mesh data) was initiated to enable its use for multi-physics analysis. With these updates, PROTEUS can obtain the mesh specification from the MOAB framework and store its data on the MOAB mesh representation so that MOAB

269

Photovoltaic module with removable wind deflector  

DOE Patents [OSTI]

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

Botkin, Jonathan; Graves, Simon; Danning, Matt; Culligan, Matthew

2014-02-18T23:59:59.000Z

270

Photovoltaic Module Reliability Workshop 2013 | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and PV Evolutions Impact and Detection of Pyranometer Failure on PV Performance, D.C. Jordan and B. Sekulic of NREL Manufacturing Metrology for c-Si Module ReliabilityDurability,...

271

Superieur lichtbereik dankzij dubbele LED module  

Science Journals Connector (OSTI)

GC Europe introduceert een nieuw concept voor lichtuitharding. De GC G-Light heeft een LED module met twee typen dioden. Met een...GC G-Light een hoge lichtopbrengst voor het uitharden van dental...

2005-08-01T23:59:59.000Z

272

Photovoltaic Module Modeling using Simulink/Matlab  

Science Journals Connector (OSTI)

This paper describes a method of modeling and simulation photovoltaic (PV) module that implemented in Simulink/Matlab. It is necessary to define a circuit-based simulation model for a PV cell in order to allow the interaction with a power converter. Characteristics of PV cells that are affected by irradiation and temperature are modeled by a circuit model. A simplified PV equivalent circuit with a diode equivalent is employed as model. The simulation results are compared with difference types of PV module datasheets. Its results indicated that the created simulation blocks in Simulink/matlab are similar to actual PV modules, compatible to different types of PV module and user-friendly.

Krismadinata; Nasrudin Abd. Rahim; Hew Wooi Ping; Jeyraj Selvaraj

2013-01-01T23:59:59.000Z

273

Project Execution Plan Review Module (RM)  

Broader source: Energy.gov [DOE]

The Project Execution Plan (PEP) Review Module (RM) is a tool that assists DOE federal project review teams in evaluating the adequacy of the PEP development and maintenance for projects of any...

274

Rack assembly for mounting solar modules  

DOE Patents [OSTI]

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures to be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed; West, Brian

2012-09-04T23:59:59.000Z

275

Rack assembly for mounting solar modules  

DOE Patents [OSTI]

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed (Oakland, CA); West, Brian (San Francisco, CA)

2010-12-28T23:59:59.000Z

276

Rack assembly for mounting solar modules  

SciTech Connect (OSTI)

A rack assembly is provided for mounting solar modules over an underlying body. The rack assembly may include a plurality of rail structures that are arrangeable over the underlying body to form an overall perimeter for the rack assembly. One or more retention structures may be provided with the plurality of rail structures, where each retention structure is configured to support one or more solar modules at a given height above the underlying body. At least some of the plurality of rail structures are adapted to enable individual rail structures o be sealed over the underlying body so as to constrain air flow underneath the solar modules. Additionally, at least one of (i) one or more of the rail structures, or (ii) the one or more retention structures are adjustable so as to adapt the rack assembly to accommodate solar modules of varying forms or dimensions.

Plaisted, Joshua Reed; West, Brian

2014-06-10T23:59:59.000Z

277

Laborlandschaft : redesigning the industrial laboratory module  

E-Print Network [OSTI]

This thesis proposes to redesign the industrial pharmaceutical laboratory typology by rethinking the composition of the laboratory module; the smallest functional sub-unit of the laboratory type. The design for this thesis ...

Farley, Alexander H. (Alexander Hamilton)

2014-01-01T23:59:59.000Z

278

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION  

Broader source: Energy.gov [DOE]

The familiar level of this module is designed to provide the basic information to meet the requirements that are related to 10 CFR 835, Occupational Radiation Protection, in the following DOE...

279

Order Module--RADIATION PROTECTION PROGRAMS GUIDE  

Broader source: Energy.gov [DOE]

The familiar level of this module is designed to provide the basic information related to DOEG 441.1-1C, Radiation Protection Programs Guide, as required in DOE-STD-1174-2003, Radiation Protection...

280

Optimal design of reverse osmosis module networks  

SciTech Connect (OSTI)

The structure of individual reverse osmosis modules, the configuration of the module network, and the operating conditions were optimized for seawater and brackish water desalination. The system model included simple mathematical equations to predict the performance of the reverse osmosis modules. The optimization problem was formulated as a constrained multivariable nonlinear optimization. The objective function was the annual profit for the system, consisting of the profit obtained from the permeate, capital cost for the process units, and operating costs associated with energy consumption and maintenance. Optimization of several dual-stage reverse osmosis systems were investigated and compared. It was found that optimal network designs are the ones that produce the most permeate. It may be possible to achieve economic improvements by refining current membrane module designs and their operating pressures.

Maskan, F.; Wiley, D.E.; Johnston, L.P.M.; Clements, D.J.

2000-05-01T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Algebraic Characters for Harish-Chandra modules  

E-Print Network [OSTI]

We give a purely cohomological treatment of a character theory for (g,K)-modules. This leads to a beautiful formalism extending to large categories of (g,K)-modules. Due to results of Hecht-Schmid and Vogan the classical results of Harish-Chandra's global character theory extend to this setting. This algebraic approach reduces (not necessarily admissible) discretely decomposable branching problems to finiteness statements about multiplicities of composition factors and appropriate character formulas.

Januszewski, Fabian

2012-01-01T23:59:59.000Z

282

Pete_Lyons_Nomination_Testimony  

Broader source: Energy.gov (indexed) [DOE]

Peter B. Lyons Peter B. Lyons Assistant Secretary for Nuclear Energy Designee Before the Committee on Energy and Natural Resources United States Senate March 8, 2011 Chairman Bingaman, Ranking Member Murkowski, and distinguished Members of the Committee, it is an honor and a privilege to appear before you today as President Obama's nominee for Assistant Secretary for Nuclear Energy within the Department of Energy. It is a special honor for me to appear before this Committee. I worked with the Members and staff of this Committee for eight years while I was in Senator Domenici's personal office, and later when I served on the staff of this Committee. I originally came to the Senate on a detail from Los Alamos National Laboratory, where I worked for nearly 30 years.

283

DOE special projects: PLACE3S GIS MODULE [Final report  

SciTech Connect (OSTI)

PLACE3S (PLAnning for Community Energy, Economic and Environmental Sustainability) energy option matching module.

NONE

2002-07-31T23:59:59.000Z

284

Contractive and completely contractive modules, matricial tangent vectors  

E-Print Network [OSTI]

Contractive and completely contractive modules, matricial tangent vectors and distance decreasing a finite dimensional Hilbert module over H() and that the module is contractive if and only if C, (v tensor product norm then again the module is contractive if and only if V is less or equal to one

Misra, Gadadhar

285

Effectiveness of robust optimization in intensity-modulated proton therapy planning for head and neck cancers  

SciTech Connect (OSTI)

Purpose: Intensity-modulated proton therapy (IMPT) is highly sensitive to uncertainties in beam range and patient setup. Conventionally, these uncertainties are dealt using geometrically expanded planning target volume (PTV). In this paper, the authors evaluated a robust optimization method that deals with the uncertainties directly during the spot weight optimization to ensure clinical target volume (CTV) coverage without using PTV. The authors compared the two methods for a population of head and neck (H and N) cancer patients. Methods: Two sets of IMPT plans were generated for 14 H and N cases, one being PTV-based conventionally optimized and the other CTV-based robustly optimized. For the PTV-based conventionally optimized plans, the uncertainties are accounted for by expanding CTV to PTV via margins and delivering the prescribed dose to PTV. For the CTV-based robustly optimized plans, spot weight optimization was guided to reduce the discrepancy in doses under extreme setup and range uncertainties directly, while delivering the prescribed dose to CTV rather than PTV. For each of these plans, the authors calculated dose distributions under various uncertainty settings. The root-mean-square dose (RMSD) for each voxel was computed and the area under the RMSD-volume histogram curves (AUC) was used to relatively compare plan robustness. Data derived from the dose volume histogram in the worst-case and nominal doses were used to evaluate the plan optimality. Then the plan evaluation metrics were averaged over the 14 cases and were compared with two-sided paired t tests. Results: CTV-based robust optimization led to more robust (i.e., smaller AUCs) plans for both targets and organs. Under the worst-case scenario and the nominal scenario, CTV-based robustly optimized plans showed better target coverage (i.e., greater D{sub 95%}), improved dose homogeneity (i.e., smaller D{sub 5%}- D{sub 95%}), and lower or equivalent dose to organs at risk. Conclusions: CTV-based robust optimization provided significantly more robust dose distributions to targets and organs than PTV-based conventional optimization in H and N using IMPT. Eliminating the use of PTV and planning directly based on CTV provided better or equivalent normal tissue sparing.

Liu Wei; Li Xiaoqiang; Park, Peter C.; Ronald Zhu, X.; Mohan, Radhe [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Frank, Steven J. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas 77030 (United States); Li Yupeng [Varian Medical Systems, Inc., Palo Alto, California 94304 (United States); Dong Lei [Scripps Proton Center, San Diego, California 92121 (United States)

2013-05-15T23:59:59.000Z

286

Microsoft PowerPoint - FinalModule3.ppt  

Broader source: Energy.gov (indexed) [DOE]

3: Project Scheduling 3: Project Scheduling Prepared by: Module 3 - Project Scheduling 1 Prepared by: Booz Allen Hamilton Module 3: Project Scheduling Welcome to Module 3. The objective of this module is to introduce you to Project Scheduling. The Topics that will be addressed in this Module include: * Define Planning vs. Scheduling * Define and Illustrate Basic Scheduling Concepts * Define Logic Relationships and Critical Path * Define and Illustrate Different Schedule Formats Module 3 - Project Scheduling 2 Prepared by: Booz Allen Hamilton Review of Previous Modules Let's quickly review what has been covered in the previous modules. * In Module 1 we introduced you to earned value and the requirements for properly implementing an earned value management system (EVMS). * In Module 2 we discussed

287

Microsoft PowerPoint - FinalModule8.ppt  

Broader source: Energy.gov (indexed) [DOE]

8: Reporting 8: Reporting Prepared by: Module 8 - Reporting 1 Prepared by: Booz Allen Hamilton Module 8: Government Required Reports Welcome to Module 8. The objective of this module is to introduce you to Government required reports. The Topics that will be addressed in this Module include: * Define Cost Performance Report (CPR) * Define Cost/Schedule Status Report (C/SSR) Module 8 - Reporting 2 Prepared by: Booz Allen Hamilton Review of Previous Modules In the previous seven modules, we discussed the framework needed to perform Earned Value and develop an Earned Value Management System (EVMS). * In Module 1 we introduced you to earned value and the requirements for properly implementing an earned value management system (EVMS) * In Module 2 we discussed the development of the work breakdown structure

288

Development of a commercial photovoltaic concentrator module  

SciTech Connect (OSTI)

The ojective of this work was to develop the design and prototype of a commercial high-concentration photovoltaic (PV) module. The design is for a 282-sun point-focus concentrating module. Most of the components, subassemblies, and design features incorporate simplifications and ease of manufacturing. The Solar Kinetics, Inc. (SKI) module is designed to incorporate high-efficiency, single-crystal silicon PV cells. The housing is made with aluminum laminated for voltage stand-off and simultaneously providing high thermal conductivity. The Fresnel lens injection molded by American Optical (AO) as singles. The cell assembly consists of a copper heat spreader, a photovoltaic cell soldered, a top and bottom contact, and a reflective secondary optical element (SOE). The cell assemblies passed all of the initial electrical characterization and high-potential tests. Under environmental cycling, the only bond that failed was the PV cell-to-heat spreader interface. The other components (top contact, bottom contact, SOE) passed all the environmental cycling tests. The cell assemblies were designed to be mounted onto the receiver section with a thermally conductive RTV. This geometry was subjected to environmental testing. There was no delamination of this bond nor was there electrical breakdown when the assemblies were subjected to the hi-pot test. A mock module was fabricated for environmental evaluation. This module was subjected to the humidity/freeze cycling to assess the performance of the lens mounting design. This module was also subjected to the rain test after the humidity/freeze cycling and checked for water leaks. The lens showed small displacement from its original position after the environmental cycling. One tablespoon of water did collect inside the module.

Saifee, S.T.; Hutchison, G. [Solar Kinetics, Inc., Dallas, TX (United States)

1992-09-01T23:59:59.000Z

289

Three dimensional, multi-chip module  

DOE Patents [OSTI]

A plurality of multi-chip modules are stacked and bonded around the perimeter by sold-bump bonds to adjacent modules on, for instance, three sides of the perimeter. The fourth side can be used for coolant distribution, for more interconnect structures, or other features, depending on particular design considerations of the chip set. The multi-chip modules comprise a circuit board, having a planarized interconnect structure formed on a first major surface, and integrated circuit chips bonded to the planarized interconnect surface. Around the periphery of each circuit board, long, narrow dummy chips'' are bonded to the finished circuit board to form a perimeter wall. The wall is higher than any of the chips on the circuit board, so that the flat back surface of the board above will only touch the perimeter wall. Module-to-module interconnect is laser-patterned on the sides of the boards and over the perimeter wall in the same way and at the same time that chip to board interconnect may be laser-patterned.

Bernhardt, A.F.; Petersen, R.W.

1993-08-31T23:59:59.000Z

290

Three dimensional, multi-chip module  

DOE Patents [OSTI]

A plurality of multi-chip modules are stacked and bonded around the perimeter by sold-bump bonds to adjacent modules on, for instance, three sides of the perimeter. The fourth side can be used for coolant distribution, for more interconnect structures, or other features, depending on particular design considerations of the chip set. The multi-chip modules comprise a circuit board, having a planarized interconnect structure formed on a first major surface, and integrated circuit chips bonded to the planarized interconnect surface. Around the periphery of each circuit board, long, narrow "dummy chips" are bonded to the finished circuit board to form a perimeter wall. The wall is higher than any of the chips on the circuit board, so that the flat back surface of the board above will only touch the perimeter wall. Module-to-module interconnect is laser-patterned o the sides of the boards and over the perimeter wall in the same way and at the same time that chip to board interconnect may be laser-patterned.

Bernhardt, Anthony F. (Berkeley, CA); Petersen, Robert W. (Pleasanton, CA)

1993-01-01T23:59:59.000Z

291

Approved Module Information for EC211C, 2014/5 Module Title/Name: Estimation, Measurement & Scheduling Module Code: EC211C  

E-Print Network [OSTI]

practice and scheduling using planning and control tools and techniques to evaluate students? own work & Scheduling Module Code: EC211C School: Engineering and Applied Science Module Type: Standard Module New and practices of construction scheduling; * To develop an understanding of cost and time in construction

Neirotti, Juan Pablo

292

electricity market module region | OpenEI  

Open Energy Info (EERE)

342 342 Varnish cache server Browse Upload data GDR 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142281342 Varnish cache server electricity market module region Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords AEO Electricity electricity market module region generation capacity Data application/vnd.ms-excel icon AEO2011: Electricity Generation Capacity by Electricity Market Module Region and Source- Reference Case (xls, 10.6 KiB) Quality Metrics Level of Review Peer Reviewed Comment Temporal and Spatial Coverage Frequency Annually

293

Siemens SOFC Test Article and Module Design  

SciTech Connect (OSTI)

Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

None

2011-03-31T23:59:59.000Z

294

Module level solutions to solar cell polarization  

DOE Patents [OSTI]

A solar cell module includes interconnected solar cells, a transparent cover over the front sides of the solar cells, and a backsheet on the backsides of the solar cells. The solar cell module includes an electrical insulator between the transparent cover and the front sides of the solar cells. An encapsulant protectively packages the solar cells. To prevent polarization, the insulator has resistance suitable to prevent charge from leaking from the front sides of the solar cells to other portions of the solar cell module by way of the transparent cover. The insulator may be attached (e.g., by coating) directly on an underside of the transparent cover or be a separate layer formed between layers of the encapsulant. The solar cells may be back junction solar cells.

Xavier, Grace (Fremont, CA), Li; Bo (San Jose, CA)

2012-05-29T23:59:59.000Z

295

Low thermal resistance power module assembly  

DOE Patents [OSTI]

A power module assembly with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate with passageways or openings for coolant that extend through the plate from a lower surface to an upper surface. A circuit substrate is provided and positioned on the spreader plate to cover the coolant passageways. The circuit substrate includes a bonding layer configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer may be solder material which bonds to the upper surface of the plate to provide a continuous seal around the upper edge of each opening in the plate. The assembly includes power modules mounted on the circuit substrate on a surface opposite the bonding layer. The power modules are positioned over or proximal to the coolant passageways.

Hassani, Vahab (Denver, CO); Vlahinos, Andreas (Castle Rock, CO); Bharathan, Desikan (Arvada, CO)

2007-03-13T23:59:59.000Z

296

Enhanced heat transfer for thermionic power modules  

SciTech Connect (OSTI)

The thermionic power module is capable of operating at very high heat fluxes, which in turn serve to reduce capital costs. The most efficient operation also requires uniform heat fluxes. The development of enhanced heat transfer systems is required to meet the demand for high heat fluxes (>20 w/cm/sup 2/) at high temperatures (>1500K) which advanced thermionic power modules place upon combustion systems. Energy transfer from the hot combustion gases may take place by convection, radiation, or a combination of radiation and convection. Enhanced convective heat transfer with a jet impingement system has been demonstrated in a thermionic converter. The recently-developed cellular ceramic radiative heat transfer system has also been applied to a thermionic converter. By comparing the jet impingement and cellular ceramic radiative heat transfer systems, an appropriate system may be selected for utilization in advanced thermionic power modules. Results are reported.

Johnson, D.C.

1981-07-01T23:59:59.000Z

297

Scannerless loss modulated flash color range imaging  

DOE Patents [OSTI]

Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

Sandusky, John V. (Albuquerque, NM); Pitts, Todd Alan (Rio Rancho, NM)

2008-09-02T23:59:59.000Z

298

Scannerless loss modulated flash color range imaging  

DOE Patents [OSTI]

Scannerless loss modulated flash color range imaging methods and apparatus are disclosed for producing three dimensional (3D) images of a target within a scene. Apparatus and methods according to the present invention comprise a light source providing at least three wavelengths (passbands) of illumination that are each loss modulated, phase delayed and simultaneously directed to illuminate the target. Phase delayed light backscattered from the target is spectrally filtered, demodulated and imaged by a planar detector array. Images of the intensity distributions for the selected wavelengths are obtained under modulated and unmodulated (dc) illumination of the target, and the information contained in the images combined to produce a 3D image of the target.

Sandusky, John V. (Albuquerque, NM); Pitts, Todd Alan (Rio Rancho, NM)

2009-02-24T23:59:59.000Z

299

Plasmon absorption modulator systems and methods  

SciTech Connect (OSTI)

Plasmon absorption modulator systems and methods are disclosed. A plasmon absorption modulator system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and a metal layer formed on a top surface of the stack of quantum well layers. A method for modulating plasmonic current includes enabling propagation of the plasmonic current along a metal layer, and applying a voltage across the stack of quantum well layers to cause absorption of a portion of energy of the plasmonic current by the stack of quantum well layers. A metamaterial switching system includes a semiconductor substrate, a plurality of quantum well layers stacked on a top surface of the semiconductor substrate, and at least one metamaterial structure formed on a top surface of the stack of quantum well layers.

Kekatpure, Rohan Deodatta; Davids, Paul

2014-07-15T23:59:59.000Z

300

Microsoft PowerPoint - FinalModule5.ppt  

Broader source: Energy.gov (indexed) [DOE]

5: EVMS Concepts and Methods 5: EVMS Concepts and Methods Prepared by: Module 5 - EVMS Concepts and Methods 1 Prepared by: Booz Allen Hamilton Module 5: EVMS Concepts and Methods Welcome to Module 5. The objective of this module is to introduce you to Basic Earned Value concepts and methods. The Topics that will be addressed in this Module include: * Earned Valve Management System (EVMS) Criteria * The definitions and illustrations of the basic EVMS terminology * The definition and illustrations of the EV methods Module 5 - EVMS Concepts and Methods 2 Prepared by: Booz Allen Hamilton Review of Previous Modules In the previous four modules, we discussed the framework needed to perform Earned Value and develop an Earned Value Management System (EVMS). * In Module 1 we introduced you to earned value and the requirements for

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Ponderomotive Forces On Waves In Modulated Media  

SciTech Connect (OSTI)

Nonlinear interactions of waves via instantaneous cross-phase modulation can be cast in the same way as ponderomotive wave-particle interactions in high-frequency electromagnetic fi eld. The ponderomotive effect arises when rays of a probe wave scatter off perturbations of the underlying medium produced by a second, modulation wave, much like charged particles scatter off a quasiperiodic field. Parallels with the point-particle dynamics, which itself is generalized by this theory, lead to new methods of wave manipulation, including asymmetric barriers for light.

Dodin, I.Y; Fisch, Nathaniel

2014-02-28T23:59:59.000Z

302

Request for Information on Photovoltaic Module Recycling  

Broader source: Energy.gov [DOE]

The U.S. Department of Energy SunShot Initiative requests feedback from industry, academia, research laboratories, government agencies, and other stakeholders on issues related to photovoltaic (PV) module recycling technology. SunShot intends to understand the current state of recycling technology and the areas of research that could lead to impactful recycling technologies to support the developing PV industry. The intent of this request for information is to generate discussion related to planning for the end of life of photovoltaic modules and to create a list of high impact research topics in photovoltaics recycling.

303

Modulation of whistler waves in nonthermal plasmas  

SciTech Connect (OSTI)

The modulation of whistler waves in nonthermal plasmas is investigated. The dynamics of the magnetized plasma is described by the fluid equations and the electron velocity distribution function is modeled via a nonthermal {kappa} distribution. A multiscale perturbation analysis based on the Krylov-Bogoliubov-Mitropolsky method is carried out and the nonlinear Schroedinger equation governing the modulation of the high-frequency whistler is obtained. The effect of the superthermal electrons on the stability of the wave envelope and soliton formation is discussed and a comparison with previous results is presented.

Rios, L. A.; Galvao, R. M. O. [Centro Brasileiro de Pesquisas Fisicas and Instituto Nacional de Ciencia e Tecnologia de Sistemas Complexos, Rua Xavier Sigaud 150, 22290-180 Rio de Janeiro (Brazil)

2011-02-15T23:59:59.000Z

304

General Renewable Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

General Renewable Energy Technology Module General Renewable Energy Technology Module Jump to: navigation, search Tool Summary LAUNCH TOOL Name: General Renewable Energy Technology Module Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy Topics: Technology characterizations Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: General Renewable Energy Technology Module[1] Resource Generation and Transmission Interconnection Process Overview, PJM Manual, Transmission and Interconnection Planning Department, System Planning Division, PJM Interconnection, LLC References ↑ "General Renewable Energy Technology Module" Retrieved from "http://en.openei.org/w/index.php?title=General_Renewable_Energy_Technology_Module&oldid=328701

305

ON COSMIC RAY MODULATION BEYOND THE HELIOPAUSE: WHERE IS THE MODULATION BOUNDARY?  

SciTech Connect (OSTI)

Two of the paradigms in modeling the transport of galactic cosmic rays are that the modulation boundary is the heliopause and that the local interstellar spectra are identical to the galactic cosmic ray spectra. Here we demonstrate that the proton spectrum is already modulated due to an altered interstellar diffusion in the outer heliosheath as a consequence of the heliospheric 'obstacle' in the interstellar flow. The main modulation effect however is adiabatic energy losses during a 'confinement time' of cosmic rays inside the heliosphere.

Scherer, K.; Fichtner, H. [Institut fuer Theoretische Physik IV, Ruhr-Universitaet Bochum, D-44780 Bochum (Germany); Strauss, R. D.; Ferreira, S. E. S.; Potgieter, M. S. [Centre for Space Research, North-West University, 2520 Potchefstroom (South Africa); Fahr, H.-J. [Argelander Institute, Universitaet of Bonn, D-53121 Bonn (Germany)

2011-07-10T23:59:59.000Z

306

Drilling Waste Management Technology Identification Module  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

you are in this section Technology Identification you are in this section Technology Identification Home » Technology Identification Drilling Waste Management Technology Identification Module The Technology Identification Module is an interactive tool for identifying appropriate drilling waste management strategies for a given well location and circumstances. The Technology Identification Module follows the philosophy of a waste management hierarchy. Waste management options with the lowest environmental impacts are encouraged ahead of those with more significant environmental impacts. The Technology Identification Module helps identify waste management options, but users should also consider their own site-specific costs and waste volumes. How it Works Users will be asked to answer a series of questions about the location of the well site, physical features of the site that may allow or inhibit the use of various options, whether the regulatory agency with jurisdiction allows or prohibits particular options, and whether cost or the user's company policy would preclude any options. Nearly all questions are set up for only "yes" or "no" responses. Depending on how the initial questions are answered, users will face from 15 to 35 total questions. Some of these can be answered immediately, while others may require some additional investigation of other portions of this web site or external information. Suitable options will be identified as users complete the questions, and users will be able to print out a summary of suitable options when the process is completed.

307

On the flat length of injective modules  

Science Journals Connector (OSTI)

......that I has a projective resolution of length n + m and hence pdRI n + m. Therefore, spli R n + m, as needed. The second inequality...n - 1. Proof. Let I be an injective left R-module. Then pdRI spli R n and hence Corol- lary 2.12 implies that fdRI n......

Ioannis Emmanouil; Olympia Talelli

2011-10-01T23:59:59.000Z

308

Optomechanical laser cooling with mechanical modulations  

E-Print Network [OSTI]

We theoretically study the laser cooling of cavity optomechanics when the mechanical resonance frequency and damping depend on time. In the regime of weak optomechanical coupling we extend the theory of laser cooling using an adiabatic approximation. We discuss the modifications of the cooling dynamics and compare it with numerical simulations in a wide range of modulation frequencies.

Marc Bienert; Pablo Barberis-Blostein

2014-12-15T23:59:59.000Z

309

Modules Whose Lattice of Submodules is Distributive  

Science Journals Connector (OSTI)

......Then (A + B)nC = (A + B)*-1 = Aoc^ + B*-1 = {AnC) + (BnC). (i...ofaD module M and a G End M. (i) IfA+Aoc = B + Boc, then A = B. (i)' If A n...proposition, A = {A + AAoc)*-1 = {B + Boc) n{B + Boc......

W. Stephenson

1974-03-01T23:59:59.000Z

310

Pulse width modulation inverter with battery charger  

DOE Patents [OSTI]

An inverter is connected between a source of DC power and a three-phase AC induction motor, and a microprocessor-based circuit controls the inverter using pulse width modulation techniques. In the disclosed method of pulse width modulation, both edges of each pulse of a carrier pulse train are equally modulated by a time proportional to sin .theta., where .theta. is the angular displacement of the pulse center at the motor stator frequency from a fixed reference point on the carrier waveform. The carrier waveform frequency is a multiple of the motor stator frequency. The modulated pulse train is then applied to each of the motor phase inputs with respective phase shifts of 120.degree. at the stator frequency. Switching control commands for electronic switches in the inverter are stored in a random access memory (RAM) and the locations of the RAM are successively read out in a cyclic manner, each bit of a given RAM location controlling a respective phase input of the motor. The DC power source preferably comprises rechargeable batteries and all but one of the electronic switches in the inverter can be disabled, the remaining electronic switch being part of a "flyback" DC-DC converter circuit for recharging the battery.

Slicker, James M. (Union Lake, MI)

1985-01-01T23:59:59.000Z

311

FUSION CATEGORIES AND MODULE CATEGORIES EVAN JENKINS  

E-Print Network [OSTI]

FUSION CATEGORIES AND MODULE CATEGORIES EVAN JENKINS k is an algebraically closed field of bilinear functors C ? D E. 2. Fusion categories Definition. Let C be a tensor/monoidal category. C is called a fusion category if (1) Every object has a left and right dual (2) 1 is simple. Examples (G

Proudfoot, Nicholas

312

Mitochondrial modulation: reversible phosphorylation takes center stage?  

E-Print Network [OSTI]

.5 billion years, mitochondria have evolved from oxygen-scavenging bacterial symbionts into pri- mary controlMitochondrial modulation: reversible phosphorylation takes center stage? David J. Pagliarini1 and Center for Human Genetics Research, Massachusetts General Hospital, Boston, MA 02114, USA In the past 1

Pagliarini, David J.

313

"Dimension theory of arbitrary modules over 2  

E-Print Network [OSTI]

finite von Neumann algebras and L -Betti numbers I: Foundations to define L2-Betti n* *umbers for arbitrary topological spaces with an action of a discrete group* *n amenable group that the p-th L2-Betti number depends only on the C -module given * *by

Lück, Wolfgang

314

Optical wavelength modulation in free electron lasers  

SciTech Connect (OSTI)

An attribute of the free electron laser (FEL) is the continuous tunability of the optical wavelength by modulation of the electron beam energy. The variation of the wavelength and power of the optical beam is studied as a function of FEL operating parameters. These results will be applied to the Stanford SCA FEL and Boeing FEL.

Mabe, R.M.; Wong, R.K.; Colson, W.B. [Naval Postgraduate School, Monterey, CA (United States)

1995-12-31T23:59:59.000Z

315

Light modulated switches and radio frequency emitters  

DOE Patents [OSTI]

The disclosure relates to a light modulated electron beam driven radiofrequency emitter. Pulses of light impinge on a photoemissive device which generates an electron beam having the pulse characteristics of the light. The electron beam is accelerated through a radiofrequency resonator which produces radiofrequency emission in accordance with the electron, hence, the light pulses.

Wilson, Mahlon T. (Los Alamos, NM); Tallerico, Paul J. (Los Alamos, NM)

1982-01-01T23:59:59.000Z

316

Modulation instability in high power laser amplifiers  

E-Print Network [OSTI]

. Widmayer, R. K. White, S. T. Yang, and B. M. VanWonterghem, "National Ignition Facility laser performanceModulation instability in high power laser amplifiers Alexander M. Rubenchik,1,* Sergey K. Turitsyn in high-power laser systems. The so-called B-integral restriction is commonly used as the criteria for MI

Turitsyn, Sergei K.

317

Ultracompact Nano-Mechanical Plasmonic Phase Modulators  

E-Print Network [OSTI]

Dielectrics' refractive index limits photonics miniaturization. By coupling light to metal's free electrons, plasmonic devices achieve deeper localization, which scales with the device geometric size. However, when localization approaches the skin depth, energy shifts from the dielectric into the metal, hindering active modulation. Here we propose a nano-electromechanical phase modulation principle exploiting the extraordinarily strong dependence of the phase velocity of metal-insulator-metal(MIM) gap plasmons on dynamically variable gap size. We demonstrate a 23 {\\mu}m long non-resonant modulator having 1.5 {\\pi} rad range with 1.7 dB excess loss at 780 nm. Analysis shows an ultracompact 1 {\\mu}m$^{2}$ footprint {\\pi} rad phase modulator can be realized, more than an order of magnitude smaller than any previously shown. Remarkably, this size reduction is achieved without incurring extra loss, since the nanobeam-plasmon coupling strength increases at a similar rate as the loss. Such small, high density electr...

Dennis, Brian S; Czaplewski, David A; Lopez, Daniel; Blumberg, Girsh; Aksyuk, Vladimir

2014-01-01T23:59:59.000Z

318

Heat Shock Response Modulators as Therapeutic  

E-Print Network [OSTI]

Heat Shock Response Modulators as Therapeutic Tools for Diseases of Protein Conformation* Published. This review addresses the regulation of molecular chaperones and components of protein homeostasis by heat understanding of pharmacologically active small molecule regu- lators of the heat shock response

Morimoto, Richard

319

Solar modulation of Little Ice Age climate in the tropical Andes  

Science Journals Connector (OSTI)

Solar modulation...University of Massachusetts, Amherst, MA...University of Massachusetts. Conflict...declared. Solar modulation...0603118103 Solar modulation...University of Massachusetts, Department...

P. J. Polissar; M. B. Abbott; A. P. Wolfe; M. Bezada; V. Rull; R. S. Bradley

2006-01-01T23:59:59.000Z

320

MODULES FOR EXPERIMENTS IN STELLAR ASTROPHYSICS (MESA)  

SciTech Connect (OSTI)

Stellar physics and evolution calculations enable a broad range of research in astrophysics. Modules for Experiments in Stellar Astrophysics (MESA) is a suite of open source, robust, efficient, thread-safe libraries for a wide range of applications in computational stellar astrophysics. A one-dimensional stellar evolution module, MESAstar, combines many of the numerical and physics modules for simulations of a wide range of stellar evolution scenarios ranging from very low mass to massive stars, including advanced evolutionary phases. MESAstar solves the fully coupled structure and composition equations simultaneously. It uses adaptive mesh refinement and sophisticated timestep controls, and supports shared memory parallelism based on OpenMP. State-of-the-art modules provide equation of state, opacity, nuclear reaction rates, element diffusion data, and atmosphere boundary conditions. Each module is constructed as a separate Fortran 95 library with its own explicitly defined public interface to facilitate independent development. Several detailed examples indicate the extensive verification and testing that is continuously performed and demonstrate the wide range of capabilities that MESA possesses. These examples include evolutionary tracks of very low mass stars, brown dwarfs, and gas giant planets to very old ages; the complete evolutionary track of a 1 M {sub sun} star from the pre-main sequence (PMS) to a cooling white dwarf; the solar sound speed profile; the evolution of intermediate-mass stars through the He-core burning phase and thermal pulses on the He-shell burning asymptotic giant branch phase; the interior structure of slowly pulsating B Stars and Beta Cepheids; the complete evolutionary tracks of massive stars from the PMS to the onset of core collapse; mass transfer from stars undergoing Roche lobe overflow; and the evolution of helium accretion onto a neutron star. MESA can be downloaded from the project Web site (http://mesa.sourceforge.net/).

Paxton, Bill; Bildsten, Lars [Kavli Institute for Theoretical Physics and Department of Physics, Kohn Hall, University of California, Santa Barbara, CA 93106 (United States); Dotter, Aaron; Herwig, Falk [Department of Physics and Astronomy, University of Victoria, P.O. Box 3055, STN CSC, Victoria, BC V8W 3P6 (Canada); Lesaffre, Pierre [LERMA-LRA, CNRS UMR8112, Observatoire de Paris and Ecole Normale Superieure, 24 Rue Lhomond, 75231 Paris Cedex 05 (France); Timmes, Frank [School of Earth and Space Exploration, Arizona State University, P.O. Box 871404, Tempe, AZ 85287-1404 (United States)

2011-01-15T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Microsoft PowerPoint - FinalModule6.ppt  

Broader source: Energy.gov (indexed) [DOE]

6: Metrics, Performance 6: Metrics, Performance Measurements and Forecasting Prepared by: Module 6 - Metrics, Performance Measures and Forecasting 2 Prepared by: Booz Allen Hamilton Module 6: Metrics, Performance Measurements and Forecasting Welcome to Module 6. The objective of this module is to introduce you to the Metrics and Performance Measurement tools used, along with Forecasting, in Earned Value Management. The Topics that will be addressed in this Module include: * Define Cost and Schedule Variances * Define Cost and Schedule Performance Indices * Define Estimate to Complete (ETC) * Define Estimate at Completion (EAC) and Latest Revised Estimate (LRE) Module 6 - Metrics, Performance Measures and Forecasting 3 Prepared by: Booz Allen Hamilton Review of Previous Modules Let's quickly review what has been covered in the previous modules.

322

Microsoft PowerPoint - FinalModule7.ppt  

Broader source: Energy.gov (indexed) [DOE]

7: Integrated Baseline Review 7: Integrated Baseline Review and Change Control Prepared by: Module 7 - Integrated Baseline Review and Change Control 1 Prepared by: Booz Allen Hamilton Module 7: Integrated Baseline Review and Change Control Welcome to Module 7. The objective of this module is to introduce you to the concepts of the Integrated Baseline Review Process and requirements for Change Control. The Topics that will be addressed in this Module include: * Definition of an Integrated Baseline Review (IBR) * Integrated Baseline Review Objectives and Responsibilities * Change Control Process Module 7 - Integrated Baseline Review and Change Control 2 Prepared by: Booz Allen Hamilton Review of Previous Modules To review some critical terminology and define the framework within which IBRs are conducted, let's look back at the previous six modules.

323

70005 MODULE AT-- U-X ASSY - Sh  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5 MODULE AT-- U-X ASSY MODULE U-X ASS'Y 1:10 1 6 RSF RSF RSF 70005 21607 - 21607 - - - INITIAL ISSUE - - WEIGHT: 3081 LBS FRONT (UPSTREAM SIDE) Parts List ITEM NO. QTY...

324

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_INITIAL...  

Broader source: Energy.gov (indexed) [DOE]

ITIALENTRYOFCOMPETENCYINFORMATION.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialINITIALENTRYOFCOMPETENCYINFORMATION.doc Microsoft Word - APRIL 2009 PMCDP...

325

Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESSTutorial_REVIEW...  

Broader source: Energy.gov (indexed) [DOE]

REVIEWUPDATECOMPETENCYINFORMATION.doc Microsoft Word - APRIL 2009 PMCDP Module CHRIS ESS TutorialREVIEWUPDATECOMPETENCYINFORMATION.doc Microsoft Word - APRIL 2009 PMCDP...

326

Code division multiple access signaling for modulated reflector technology  

DOE Patents [OSTI]

A method and apparatus for utilizing code division multiple access in modulated reflectance transmissions comprises the steps of generating a phase-modulated reflectance data bit stream; modifying the modulated reflectance data bit stream; providing the modified modulated reflectance data bit stream to a switch that connects an antenna to an infinite impedance in the event a "+1" is to be sent, or connects the antenna to ground in the event a "0" or a "-1" is to be sent.

Briles, Scott D. (Los Alamos, NM)

2012-05-01T23:59:59.000Z

327

Energy Policy 30 (2002) 477499 Photovoltaic module quality in  

E-Print Network [OSTI]

Energy Policy 30 (2002) 477­499 Photovoltaic module quality in the Kenyan solar home systems market purchases of clean decentralized photovoltaic technologies. Small amorphous-silicon modules dominate. This article analyzes market failure associated with photovoltaic module quality in the Kenyan SHS market

Kammen, Daniel M.

328

Name of Module: Next Generation Network Project 2  

E-Print Network [OSTI]

) 30 Total 270 8. Module Examination and Grading Procedures The project will be examined at the beginning of the module. 11. Enrolment Procedures To participate to the lectures/seminars/projectsName of Module: Next Generation Network ­ Project 2 CP (ECTS): 9 Short Name: MINF-KS-AV/PJ2.W12

Wichmann, Felix

329

Name of Module: Next Generation Network Project 1  

E-Print Network [OSTI]

) 30 Total 270 8. Module Examination and Grading Procedures The project will be examined at the beginning of the module. 11. Enrolment Procedures To participate to the lectures/seminars/projectsName of Module: Next Generation Network ­ Project 1 CP (ECTS): 9 Short Name: MINF-KS-AV/PJ1.W12

Wichmann, Felix

330

Low cost highly reliable telemetry module for space applications  

Science Journals Connector (OSTI)

In this paper we demonstrate a low cost highly reliable telemetry module design suitable for low orbit satellites based on commercial or industrial components. The proposed telemetry module configuration employs on shelf components to achieve 3 Kg weight, ... Keywords: highly reliable design, low orbit satellite, space application, telemetry module

Aladin S. Abdelaziz; Ahmed M. Mahmoud

2006-12-01T23:59:59.000Z

331

Energy use in optical modulators David A. B. Miller  

E-Print Network [OSTI]

Energy use in optical modulators David A. B. Miller Ginzton Laboratory, Stanford University, Nano particularly low energy for low-voltage electroabsorption modulators Optical modulators can offer low energy can usefully define an optical energy launch efficiency E , which is the ratio of the useful energy

Miller, David A. B.

332

School of Computer Science and Statistics ECTS Module Descriptor  

E-Print Network [OSTI]

School of Computer Science and Statistics ECTS Module Descriptor Academic Year 2011-2012 Module Code ST2004 Module Title Applied Probability Pre-requisites - ECTS 5 Chief Examiner Prof J Haslett probability · Uncertainty as lack of information · Making decisions · Modelling, discussing, evaluating random

O'Mahony, Donal E.

333

Spectrally Efficient Modulation and Turbo Coding for Communication Systems  

E-Print Network [OSTI]

Spectrally Efficient Modulation and Turbo Coding for Communication Systems Amer H. Alhabsi. · Modulation. · Turbo coding. · Spectral efficient modulation with TC. · Parity Assisted Decoding. · Summary encoder · It expands the data by adding redundancy. · Redundancy is added in a systematic fashion

Akl, Robert

334

Development of an Outdoor Concentrating Photovoltaic Module Testbed, Module Handling and Testing Procedures, and Initial Energy Production Results  

SciTech Connect (OSTI)

This report addresses the various aspects of setting up a CPV testbed and procedures for handling and testing CPV modules.

Muller, M.

2009-09-01T23:59:59.000Z

335

Results of testing a development module of the second-generation E-Systems concentrating photovoltaic-thermal module  

SciTech Connect (OSTI)

An actively-cooled linear Fresnel lens concentrating photovoltaic and thermal module, designed and built by E-Systems, was tested in the Photovoltaic Advanced Systems Test Facility. Physical, electrical, and thermal characteristics of the module are presented. Module performance is characterized through the use of multiple linear regression techniques.

Harrison, T D

1982-04-01T23:59:59.000Z

336

Module No: 420475Forensic MedicineModule Title: Co-requisite:Law of Criminal ProcedurePre-requisite  

E-Print Network [OSTI]

Module No: 420475Forensic MedicineModule Title: Co-requisite:Law of Criminal ProcedureSpecial Educational Guidance Office Hours Module Description: This is an introduction to forensic medicine and the manner of utilizing forensic physicians in particular, and other doctors in general, and medical

337

Natural Gas Transmission and Distribution Module  

Gasoline and Diesel Fuel Update (EIA)

page intentionally left blank page intentionally left blank 129 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2011 Natural Gas Transmission and Distribution Module The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through the regional interstate network, for both a peak (December through March) and off peak period during each projection year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution network that links them. Natural gas flow patterns are a function of the pattern in the previous year, coupled

338

Natural Gas Transmission and Distribution Module This  

Gasoline and Diesel Fuel Update (EIA)

This This page inTenTionally lefT blank 127 U.S. Energy Information Administration | Assumptions to the Annual Energy Outlook 2012 Natural Gas Transmission and Distribution Module The NEMS Natural Gas Transmission and Distribution Module (NGTDM) derives domestic natural gas production, wellhead and border prices, end-use prices, and flows of natural gas through a regional interstate representative pipeline network, for both a peak (December through March) and off-peak period during each projection year. These are derived by solving for the market equilibrium across the three main components of the natural gas market: the supply component, the demand component, and the transmission and distribution network that links them. Natural gas flow patterns are a function of the

339

Microsoft Word - CPARS Web Based Training Modules  

Broader source: Energy.gov (indexed) [DOE]

March 2010 1 March 2010 1 There are 5 web based training modules for Contractor Performance Assessment Reporting System (CPARS), Architect-Engineer Contract Administration Support Systems (ACASS), and Construction Contractor Appraisal Support System (CCASS). This on-line web based training is an interactive online classroom for the delivery of live training. There is no investment in software required. Web based training classes and the schedule for CPARS, ACASS, and CCASS classes are at http://www.cpars.csd.disa.mil/allapps/cpartrng/webtrain/webtrain_all.htm. The modules are as follows: 1 - ACASS/CCASS Overview (2 hours) (1 Continuous Learning Point) This training will give the student an overview of the policies and regulations governing ACASS/CCASS, the ACASS/CCASS Workflow, and ACASS/CCASS Application

340

Allosteric Modulation of DNA by Small Molecules  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Allosteric Modulation of DNA by Small Allosteric Modulation of DNA by Small Molecules Signals originating at the cell surface are conveyed by a complex system of interconnected signaling pathways to the nucleus. They converge at transcription factors, which in turn regulate the transcription of sets of genes that result in the gene expression. Many human diseases are caused by dysregulated gene expression and the oversupply of transcription factors may be required for the growth and metastatic behavior of human cancers. Cell permeable small molecules that can be programmed to disrupt transcription factor-DNA interfaces could silence aberrant gene expression pathways. Pyrrole-imidazole polyamides are DNA minor groove binding small molecules that are programmable for a large repertoire of DNA motifs.

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Spin precession modulation in a magnetic bilayer  

SciTech Connect (OSTI)

We report on modulation of the spin precession in a Co/garnet bilayer by femtosecond laser excitation using time-resolved magneto-optical tools. Damped oscillations in the Faraday rotation transients representing precessional motion of the magnetization vector are observed in both the 2 nm Co layer and 1.8 {mu}m garnet of the bilayer with distinct frequencies differing by about a factor of two. The excitation efficiency of these precessions strongly depends on the out-of-plane magnetic field. The modulation effect with the coupling in a magnetic bilayer can be useful for non-thermally controlling the magnetization of nanomagnets and ultrafast switching in magnetic nanodevices.

Stupakiewicz, A.; Maziewski, A. [Laboratory of Magnetism, Faculty of Physics, University of Bialystok, Lipowa 41, Bialystok (Poland); Pashkevich, M. [Laboratory of Magnetism, Faculty of Physics, University of Bialystok, Lipowa 41, Bialystok (Poland); Scientific-Practical Materials Research Centre of the NASB, P. Brovki 19, Minsk (Belarus); Stognij, A.; Novitskii, N. [Scientific-Practical Materials Research Centre of the NASB, P. Brovki 19, Minsk (Belarus)

2012-12-24T23:59:59.000Z

342

Semimetalic graphene in a modulated electric potential  

E-Print Network [OSTI]

The $\\pi$-electronic structure of graphene in the presence of a modulated electric potential is investigated by the tight-binding model. The low-energy electronic properties are strongly affected by the period and field strength. Such a field could modify the energy dispersions, destroy state degeneracy, and induce band-edge states. It should be noted that a modulated electric potential could make semiconducting graphene semimetallic, and that the onset period of such a transition relies on the field strength. There exist infinite Fermi-momentum states in sharply contrast with two crossing points (Dirac points) for graphene without external fields. The finite density of states (DOS) at the Fermi level means that there are free carriers, and, at the same time, the low DOS spectrum exhibits many prominent peaks, mainly owing to the band-edge states.

J. H. Ho; Y. H. Chiu; S. J. Tsai; M. F. Lin

2008-09-09T23:59:59.000Z

343

Photovoltaic module with light reflecting backskin  

DOE Patents [OSTI]

A photovoltaic module comprises electrically interconnected and mutually spaced photovoltaic cells that are encapsulated by a light-transmitting encapsulant between a light-transparent front cover and a back cover, with the back cover sheet being an ionomer/nylon alloy embossed with V-shaped grooves running in at least two directions and coated with a light reflecting medium so as to provide light-reflecting facets that are aligned with the spaces between adjacent cells and oriented so as to reflect light falling in those spaces back toward said transparent front cover for further internal reflection onto the solar cells, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to the photovoltaic cells, thereby increasing the current output of the module. The internal reflector improves power output by as much as 67%.

Gonsiorawski, Ronald C. (Danvers, MA)

2007-07-03T23:59:59.000Z

344

Rack Module Enhancements of Counting Invariants  

E-Print Network [OSTI]

We introduce a modified rack algebra Z[X] for racks X with finite rack rank N. We use representations of Z[X] into rings, known as rack modules, to define enhancements of the rack counting invariant for classical and virtual knots and links. We provide computations and examples to show that the new invariants are strictly stronger than the unenhanced counting invariant and are not determined by the Jones or Alexander polynomials.

Haas, Aaron; Nelson, Sam; Yuen, Jonah; Zhan, Qingcheng

2010-01-01T23:59:59.000Z

345

Effects of Metastabilities on CIGS Photovoltaic Modules  

Broader source: Energy.gov [DOE]

This poster describes a SunShot Initiative solar project led by a team from Nexcis Photovoltaic Technology entitled "Effects of Metastabilities on CIGS Photovoltaic Modules." The team studied the driving force of the mechanisms which governs the different observed phases during storage, light exposition and annealing. The aim of this study is to obtain a better understanding of this phenomenon and hence a better evaluation of its impact on solar panel reliability.

346

Solar Cell Modules With Improved Backskin  

DOE Patents [OSTI]

A laminated solar cell module comprises a front light transmitting support, a plurality of interconnected solar cells encapsulated by a light-transmitting encapsulant material, and an improved backskin formed of an ionomer/nylon alloy. The improved backskin has a toughness and melting point temperature sufficiently great to avoid any likelihood of it being pierced by any of the components that interconnect the solar cells.

Gonsiorawski, Ronald C. (Danvers, MA)

2003-12-09T23:59:59.000Z

347

Positive modulator of bone morphogenic protein-2  

DOE Patents [OSTI]

Compounds of the present invention of formula I and formula II are disclosed in the specification and wherein the compounds are modulators of Bone Morphogenic Protein activity. Compounds are synthetic peptides having a non-growth factor heparin binding region, a linker, and sequences that bind specifically to a receptor for Bone Morphogenic Protein. Uses of compounds of the present invention in the treatment of bone lesions, degenerative joint disease and to enhance bone formation are disclosed.

Zamora, Paul O. (Gaithersburg, MD); Pena, Louis A. (Poquott, NY); Lin, Xinhua (Plainview, NY); Takahashi, Kazuyuki (Germantown, MD)

2009-01-27T23:59:59.000Z

348

NEMS Freight Transportation Module Improvement Study  

Reports and Publications (EIA)

The U.S. Energy Information Administration (EIA) contracted with IHS Global, Inc. (IHS) to analyze the relationship between the value of industrial output, physical output, and freight movement in the United States for use in updating analytic assumptions and modeling structure within the National Energy Modeling System (NEMS) freight transportation module, including forecasting methodologies and processes to identify possible alternative approaches that would improve multi-modal freight flow and fuel consumption estimation.

2015-01-01T23:59:59.000Z

349

Downhole drilling network using burst modulation techniques  

DOE Patents [OSTI]

A downhole drilling system is disclosed in one aspect of the present invention as including a drill string and a transmission line integrated into the drill string. Multiple network nodes are installed at selected intervals along the drill string and are adapted to communicate with one another through the transmission line. In order to efficiently allocate the available bandwidth, the network nodes are configured to use any of numerous burst modulation techniques to transmit data.

Hall; David R. (Provo, UT), Fox; Joe (Spanish Fork, UT)

2007-04-03T23:59:59.000Z

350

Wind Energy Technology Module | Open Energy Information  

Open Energy Info (EERE)

Wind Energy Technology Module Wind Energy Technology Module Jump to: navigation, search Tool Summary Name: Wind Energy Technology Module Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy, Wind Topics: Background analysis, Technology characterizations Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, Country: Russia, China Eastern Europe, Eastern Asia Coordinates: 54.5283298°, 112.9648819° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":54.5283298,"lon":112.9648819,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

351

Determination of Thermoelectric Module Efficiency A Survey  

SciTech Connect (OSTI)

The development of thermoelectrics (TE) for energy conversion is in the transition phase from laboratory research to device development. There is an increasing demand to accurately determine the module efficiency, especially for the power generation mode. For many thermoelectrics, the figure of merit, ZT, of the material sometimes cannot be fully realized at the device level. Reliable efficiency testing of thermoelectric modules is important to assess the device ZT and provide the end-users with realistic values on how much power can be generated under specific conditions. We conducted a general survey of efficiency testing devices and their performance. The results indicated the lack of industry standards and test procedures. This study included a commercial test system and several laboratory systems. Most systems are based on the heat flow meter method and some are based on the Harman method. They are usually reproducible in evaluating thermoelectric modules. However, cross-checking among different systems often showed large errors that are likely caused by unaccounted heat loss and thermal resistance. Efficiency testing is an important area for the thermoelectric community to focus on. A follow-up international standardization effort is planned.

Wang, Hsin [ORNL; McCarty, Robin [Marlow Industries, Inc; Salvador, James R. [GM R& D and Planning, Warren, Michigan; Yamamoto, Atsushi [AIST, Japan; Konig, Jan [Fraunhofer-Institute, Freiburg, Germany

2014-01-01T23:59:59.000Z

352

Low thermal resistance power module assembly  

DOE Patents [OSTI]

A power module assembly (400) with low thermal resistance and enhanced heat dissipation to a cooling medium. The assembly includes a heat sink or spreader plate (410) with passageways or openings (414) for coolant that extend through the plate from a lower surface (411) to an upper surface (412). A circuit substrate (420) is provided and positioned on the spreader plate (410) to cover the coolant passageways. The circuit substrate (420) includes a bonding layer (422) configured to extend about the periphery of each of the coolant passageways and is made up of a substantially nonporous material. The bonding layer (422) may be solder material which bonds to the upper surface (412) of the plate to provide a continuous seal around the upper edge of each opening (414) in the plate. The assembly includes power modules (430) mounted on the circuit substrate (420) on a surface opposite the bonding layer (422). The power modules (430) are positioned over or proximal to the coolant passageways.

Hassani, Vahab (Denver, CO); Vlahinos, Andreas (Castle Rock, CO); Bharathan, Desikan (Arvada, CO)

2010-12-28T23:59:59.000Z

353

Solar module having reflector between cells  

DOE Patents [OSTI]

A photovoltaic module comprising an array of electrically interconnected photovoltaic cells disposed in a planar and mutually spaced relationship between a light-transparent front cover member in sheet form and a back sheet structure is provided with a novel light-reflecting means disposed between adjacent cells for reflecting light falling in the areas between cells back toward said transparent cover member for further internal reflection onto the solar cells. The light-reflecting comprises a flexible plastic film that has been embossed so as to have a plurality of small V-shaped grooves in its front surface, and a thin light-reflecting coating on said front surface, the portions of said coating along the sides of said grooves forming light-reflecting facets, said grooves being formed so that said facets will reflect light impinging thereon back into said transparent cover sheet with an angle of incidence greater than the critical angle, whereby substantially all of the reflected light will be internally reflected from said cover sheet back to said solar modules, thereby increasing the current output of the module.

Kardauskas, Michael J. (Billerica, MA)

1999-01-01T23:59:59.000Z

354

Designed TPR Modules as Novel Anticancer Agents  

SciTech Connect (OSTI)

Molecules specifically designed to modulate protein-protein interactions have tremendous potential as novel therapeutic agents. One important anticancer target is the chaperone Hsp90, whose activity is essential for the folding of many oncogenic proteins, including HER2, IGFIR, AKT, RAF-1, and FLT-3. Here we report the design and characterization of new tetratricopeptide repeat modules, which bind to the C-terminus of Hsp90 with higher affinity and with greater specificity than natural Hsp90-binding co-chaperones. Thus, when these modules are introduced into the cell, they out-compete endogenous co-chaperones for binding, thereby inhibiting Hsp90 function. The effect of Hsp90 inhibition in this fashion is dramatic; HER2 levels are substantially decreased and BT474 HER2 positive breast cancer cells are killed. Our designs thus provide new tools with which to dissect the mechanism of Hsp90-mediated protein folding and also open the door to the development of an entirely new class of anticancer agents.

Cortajarena,A.; Yi, F.; Regan, L.

2008-01-01T23:59:59.000Z

355

T-674: Drupal Secure Password Hashes Module Security Bypass Vulnerability |  

Broader source: Energy.gov (indexed) [DOE]

74: Drupal Secure Password Hashes Module Security Bypass 74: Drupal Secure Password Hashes Module Security Bypass Vulnerability T-674: Drupal Secure Password Hashes Module Security Bypass Vulnerability July 22, 2011 - 3:00pm Addthis PROBLEM: Drupal Secure Password Hashes Module Security Bypass Vulnerability PLATFORM: Drupal Secure Password Hashes 6.X-1.0 Drupal Secure Password Hashes 5.X-1.4 ABSTRACT: The Secure Password Hashes module for Drupal is prone to a security-bypass vulnerability. reference LINKS: Drupal Homepage SA-CONTRIB-2011-026 - Secure Password Hashes (phpass) - Multiple Vulnerabilities IMPACT ASSESSMENT: Medium Discussion: This module uses the PHPass hashing library to try to store users hashed passwords securely. The module sets a fixed string for the 'pass' column in the {users} database column but does not replace the pass attribute of the account

356

Microsoft PowerPoint - FinalModule4.ppt  

Broader source: Energy.gov (indexed) [DOE]

4: Budgeting 4: Budgeting Prepared by: Prepared by: Booz Allen Hamilton Module 4 - Budgeting 1 Module 4: Budgeting Welcome to Module 4. The objective of this module is to introduce you to Budgeting Concepts and Definitions. The Topics that will be addressed in this Module include: * Cost/Schedule Baselines * WBS Levels: Control Accounts, Work Packages, Planning Packages * Elements of an Earned Value Contract Baseline * Proposed Cost and the Contract Budget Baseline * Control Account Manager Roles and Responsibilities * Review Prepared by: Booz Allen Hamilton Module 4 - Budgeting 2 The Budgeting Process In the previous module, we defined Planning as making decisions with the following objectives: * Define what will be performed (Statement of Work) * Determine how the work will be structured and tracked (Work Breakdown

357

scriptEnv - loading modules before starting a script  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

scriptEnv - loading modules before starting a script scriptEnv - loading modules before starting a script scriptEnv - loading modules before starting a script In some cases a script needs to load modules before the script can be executed, but it can often be inconvenient or impossible to provide wrapper scripts which load the needed modules. CGI scripts on the gpweb resources or in the NERSC portal environment which require the genepool-specific python/perl/R or databases configuration modules are a strong example of this. NERSC provides the scriptEnv as a custom drop-in replacement for /usr/bin/env. scriptEnv loads your selected modules to allow your scripts to run easily and reproducibly. After constructing your scriptEnv, you only need replace the shebang line of your script to use your custom scriptEnv

358

Microsoft PowerPoint - FinalModule1.ppt  

Broader source: Energy.gov (indexed) [DOE]

1: Introduction to Earned Value 1: Introduction to Earned Value Management Prepared by: Module 1 - Introduction 1 Prepared by: Booz Allen Hamilton Module1: Introduction to Earned Value Welcome to Module 1. The objective of this module is to introduce you to Earned Value and lay the blueprint for the succeeding modules. This module will include the following topics: * Earned Value Management defined * The differences between Traditional Management and Earned Value Management * How Earned Value Management fits into a Program and Project environment * The framework necessary for proper Earned Value implementation Module 1 - Introduction 2 Prepared by: Booz Allen Hamilton What is Earned Value Management? Earned Value Management (EVM) is a systematic approach to the integration and measurement of cost, schedule, and technical (scope) accomplishments

359

The shortest modulation period Blazhko RR Lyrae star: SS Cnc  

E-Print Network [OSTI]

Extended BV(RI)c CCD observations of SS Cnc, a short period RRab star are presented. Nearly 1400 data points in each band have been obtained spanning over 79 days during the spring of 2005. The star exhibits light curve modulation, the so called Blazhko effect with small amplitude (B maximum brightness varies 0.1 mag) and with the shortest modulation period (5.309 d) ever observed. In the Fourier spectrum of the V light curve the pulsation frequency components are detected up to the 24th harmonic order, and modulation side lobe frequencies with significantly asymmetric amplitudes are seen up to the 15th and 9th orders for the lower and higher frequency components, respectively. Detailed comparison of the modulation behavior of SS Cnc and RR Gem, the two recently discovered small amplitude, short modulation period Blazhko stars is presented. The modulation frequency (f_m) appears in the Fourier spectrum of both stars with similar amplitude. We also demonstrate that the modulation frequencies have basically different properties as the pulsation and modulation side lobe frequencies have, indicating that the physics behind these frequency components are not the same. The discovery of small amplitude modulations of RRab stars cautions that the large photometric surveys (MACHO, OGLE) may seriously underestimate the number of modulated RR Lyrae stars.

J. Jurcsik; B. Szeidl; . Sdor; I. Dkny; Zs. Hurta; K. Posztobnyi; K. Vida; M. Vradi; A. Szing

2006-03-20T23:59:59.000Z

360

Approved Module Information for ME2042, 2014/5 Module Title/Name: Energy Supply and Delivery Module Code: ME2042  

E-Print Network [OSTI]

to assess both technically and financially the potential for renewable energy sources in the UK. The module and sustainability. Ability to analyse and assess energy supply routes, especially efficiency. Ability to demonstrate to undertake background research and produce media briefing report on a given energy topic. Indicative Module

Neirotti, Juan Pablo

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Approved Module Information for ME3013, 2014/5 Module Title/Name: Heat Transfer and Turbomachinery Module Code: ME3013  

E-Print Network [OSTI]

Approved Module Information for ME3013, 2014/5 Module Title/Name: Heat Transfer and Turbomachinery Outcomes: The students will have developed an understanding of a range of advanced heat transfer and turbo-machinery. * Unsteady heat transfer Turbomachinery: * Momentum and energy equations for turbo-machines * Radial, axial

Neirotti, Juan Pablo

362

Modulational instability in wind-forced waves  

E-Print Network [OSTI]

We consider the wind-forced nonlinear Schroedinger (NLS) equation obtained in the potential flow framework when the Miles growth rate is of the order of the wave steepness. In this case, the form of the wind-forcing terms gives rise to the enhancement of the modulational instability and to a band of positive gain with infinite width. This regime is characterised by the fact that the ratio between wave momentum and norm is not a constant of motion, in contrast to what happens in the standard case where the Miles growth rate is of the order of the steepness squared.

Brunetti, Maura

2014-01-01T23:59:59.000Z

363

Projective module description of embedded noncommutative spaces  

E-Print Network [OSTI]

An algebraic formulation is given for the embedded noncommutative spaces over the Moyal algebra developed in a geometric framework in \\cite{CTZZ}. We explicitly construct the projective modules corresponding to the tangent bundles of the embedded noncommutative spaces, and recover from this algebraic formulation the metric, Levi-Civita connection and related curvatures, which were introduced geometrically in \\cite{CTZZ}. Transformation rules for connections and curvatures under general coordinate changes are given. A bar involution on the Moyal algebra is discovered, and its consequences on the noncommutative differential geometry are described.

R. B. Zhang; Xiao Zhang

2008-10-14T23:59:59.000Z

364

Very High Efficiency Solar Cell Modules  

SciTech Connect (OSTI)

The Very High Efficiency Solar Cell (VHESC) program is developing integrated optical system - PV modules for portable applications that operate at greater than 50% efficiency. We are integrating the optical design with the solar cell design, and have entered previously unoccupied design space. Our approach is driven by proven quantitative models for the solar cell design, the optical design, and the integration of these designs. Optical systems efficiency with an optical efficiency of 93% and solar cell device results under ideal dichroic splitting optics summing to 42.7 {+-} 2.5% are described.

Barnett, A.; Kirkpatrick, D.; Honsberg, C.; Moore, D.; Wanlass, M.; Emery, K.; Schwartz, R.; Carlson, D.; Bowden, S.; Aiken, D.; Gray, A.; Kurtz, S.; Kazmerski, L., et al

2009-01-01T23:59:59.000Z

365

Flat-Plate Photovoltaic Module Basics | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Module Basics Module Basics Flat-Plate Photovoltaic Module Basics August 20, 2013 - 4:25pm Addthis Flat-plate photovoltaic (PV) modules are made of several components, including the front surface materials, encapsulant, rear surface, and frame. Front Surface Materials The front surface of a flat-plate PV module must have a high transmission in the wavelengths that can be used by the solar cells in the module. For example, for silicon solar cells, the top surface must have high transmission of light with wavelengths from 350 to 1200 nm. Also, reflection from the front surface should be minimal. An antireflection coating added to the top surface can greatly reduce the reflection of sunlight, and texturing of the surface can cause light that strikes the surface to stay within the cells. Unfortunately, these textured

366

Integrated Modules for Bioassay (IMBA) | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Integrated Modules for Bioassay (IMBA) Current Central Registry Toolbox Version(s): IMBA ExpertTM USDOE Edition version 4.0.28 Code Owner: UK Health Protection Agency (HPA) Description: IMBA ExpertTM (IX) software suite comprises a series of independent modules (referred to as sub-modules) that implement the International Commission on Radiological Protection (ICRP) Publication 66, Human Respiratory Tract Model (HRTM) and the ICRP Publications 30 (series), 67, 68, 69, and 71 biokinetic models. In 2001, the United Kingdom (UK) National Radiological Protection Board (NRPB), whose functions were absorbed later into the UK Health Protection Agency (HPA), and ACJ & Associates Inc., began development of an interface (referred to as a shell) for the IMBA modules. This effort was funded in

367

A solar module fabrication process for HALE solar electric UAVs  

SciTech Connect (OSTI)

We describe a fabrication process used to manufacture high power-to-weight-ratio flexible solar array modules for use on high-altitude-long-endurance (HALE) solar-electric unmanned air vehicles (UAVs). These modules have achieved power-to-weight ratios of 315 and 396 W/kg for 150{mu}m-thick monofacial and 110{mu}m-thick bifacial silicon solar cells, respectively. These calculations reflect average module efficiencies of 15.3% (150{mu}m) and 14.7% (110{mu}m) obtained from electrical tests performed by Spectrolab, Inc. under AMO global conditions at 25{degrees}C, and include weight contributions from all module components (solar cells, lamination material, bypass diodes, interconnect wires, and adhesive tape used to attach the modules to the wing). The fabrication, testing, and performance of 32 m{sup 2} of these modules will be described.

Carey, P.G.; Aceves, R.C.; Colella, N.J.; Williams, K.A. [Lawrence Livermore National Lab., CA (United States); Sinton, R.A. [Private Consultant, San Jose, CA (United States); Glenn, G.S. [Spectrolab, Inc., Sylmar, CA (United States)

1994-12-12T23:59:59.000Z

368

Design and preliminary test results of Daya Bay RPC modules*  

SciTech Connect (OSTI)

Resistive Plate Chamber (RPC) modules will be used as one part of the cosmic muon veto system in the Daya Bay reactor neutrino experiment. A total of 189 RPC modules will cover the three water pools in the experiment. To achieve track reconstruction and high efficiency, each module consists of 4 layers, each of which contains two sizes of bare chambers. The placement of bare chambers is reversed in different layers to reduce the overlapping dead areas. The module efficiency and patch efficiency were studied both in simulation and test of the data analysis. 143 modules have been constructed and tested. The preliminary study shows that the module and patch 3 out of 4 layers efficiency reaches about 98%.

Hackenburg, R.

2011-09-01T23:59:59.000Z

369

Microsoft PowerPoint - FinalModule2.ppt  

Broader source: Energy.gov (indexed) [DOE]

2: Work Breakdown Structure 2: Work Breakdown Structure Prepared by: Module 2 - Work Breakdown Structure 1 Prepared by: Booz Allen Hamilton Module 2: Work Breakdown Structure Welcome to Module 2. The objective of this module is to introduce you to Work Breakdown Structure (WBS) and other supporting documents. This module will include defining and illustrating the following topics: * Work Breakdown Structure * WBS dictionary * Organizational Breakdown Structure (OBS) * Responsibility Assignment Matrix (RAM) Module 2 - Work Breakdown Structure 2 Prepared by: Booz Allen Hamilton What is a Work Breakdown Structure? Planning a project using earned value management is no different than the initial planning necessary to implement any given project. There are basic items that you need to know and understand as a project manager:

370

Web modules and applications 1 Hector A. Merklen  

E-Print Network [OSTI]

Web modules and applications 1 H´ector A. Merklen Universidade de S~ao Paulo S~ao Paulo, SP, Brazil cycles, its k - proper web module is the representation with a k at each vertex and an identity map at each arrow. Given a k-algebra of the form kQ/I, the -web modules are the ones induced by proper web

Merklen, Héctor

371

Assembly of opto-electronic module with improved heat sink  

DOE Patents [OSTI]

A heat sink for a transceiver optoelectronic module including dual direct heat paths and a structure which encloses a number of chips having a central web which electrically isolates transmitter and receiver chips from each other. A retainer for an optical coupler having a port into which epoxy is poured. An overmolded base for an optoelectronic module having epoxy flow controller members built thereon. Assembly methods for an optoelectronic module including gap setting and variation of a TAB bonding process.

Chan, Benson (Vestal, NY); Fortier, Paul Francis (Richelieu, CA); Freitag, Ladd William (Rochester, MN); Galli, Gary T. (Binghampton, NY); Guindon, Francois (Stukely-sud, CA); Johnson, Glen Walden (Yorktown Heights, NY); Letourneau, Martial (Granby, CA); Sherman, John H. (Lisle, NY); Tetreault, Real (Granby, CA)

2004-11-23T23:59:59.000Z

372

Investigation of 4-ASK modulation with digital filtering to increase 20 times of direct modulation speed of white-light LED visible light communication system  

Science Journals Connector (OSTI)

In this demonstration, we propose and experimentally investigate the quaternary-amplitude-shift-keying (4-ASK) modulation with digital filtering to enhance the direct modulation speed...

Yeh, C H; Liu, Y F; Chow, C W; Liu, Y; Huang, P Y; Tsang, H K

2012-01-01T23:59:59.000Z

373

FANTM, the First Article NIF Test Module  

SciTech Connect (OSTI)

Designing and developing the 1.7 to 2.1-MJ Power Conditioning System (PCS), that will power the flashlamps of the main and power amplifiers for the National Ignition Facility (NIF) lasers, is one of several responsibilities assumed by Sandia National Labs (SNL) in support of the NIF Project. Maxwell Physics International has been a partner in this process. The NIF is currently being constructed at Lawrence Livermore National Labs (LLNL). The test facility that has evolved over the last three years to satisfy the project requirements is called FANTM, for the First Article NIF Test Module. It was built at SNL and operated for about 17,000 shots to demonstrate component performance expectations over the lifetime of NIF. A few modules similar to the one shown in Fig. 1 will be used initially in the amplifier test phase of the project. The final full NIF system will require at least 192 of them in four capacitor bays. This paper briefly summarizes the final design of the FANTM facility and compares its performance with the predictions of circuit simulations for both normal operation and fault-mode response. Applying both the measured and modeled power pulse waveforms as input to a physics-based, semi-empirical amplifier gain code indicates that the 20-capacitor PCS can satisfy the NIF requirement for an average gain coefficient of 5.00 %/cm and can exceed 5.20 %/cm with 24 capacitors.

HAMMON,JUD; HARJES,HENRY C.; MOORE,WILLIAM B. S.; SMITH,DAVID L.; WILSON,J. MICHAEL

1999-11-30T23:59:59.000Z

374

Assumptions to the Annual Energy Outlook - Petroleum Market Module  

Gasoline and Diesel Fuel Update (EIA)

Petroleum Market Module Petroleum Market Module Assumption to the Annual Energy Outlook Petroleum Market Module Figure 8. Petroleum Administration for Defense Districts. Having problems, call our National Energy Information Center at 202-586-8800 for help. The NEMS Petroleum Market Module (PMM) forecasts petroleum product prices and sources of supply for meeting petroleum product demand. The sources of supply include crude oil (both domestic and imported), petroleum product imports, other refinery inputs including alcohols, ethers, and bioesters natural gas plant liquids production, and refinery processing gain. In addition, the PMM estimates capacity expansion and fuel consumption of domestic refineries. The PMM contains a linear programming representation of U.S. refining

375

Assumptions to the Annual Energy Outlook - Household Expenditures Module  

Gasoline and Diesel Fuel Update (EIA)

Household Expenditures Module Household Expenditures Module Assumption to the Annual Energy Outlook Household Expenditures Module Figure 5. United States Census Divisions. Having problems, call our National Energy Information Center at 202-586-8800 for help. The Household Expenditures Module (HEM) constructs household energy expenditure profiles using historical survey data on household income, population and demographic characteristics, and consumption and expenditures for fuels for various end-uses. These data are combined with NEMS forecasts of household disposable income, fuel consumption, and fuel expenditures by end-use and household type. The HEM disaggregation algorithm uses these combined results to forecast household fuel consumption and expenditures by income quintile and Census Division (see

376

Digital intermediate frequency QAM modulator using parallel processing  

DOE Patents [OSTI]

The digital Intermediate Frequency (IF) modulator applies to various modulation types and offers a simple and low cost method to implement a high-speed digital IF modulator using field programmable gate arrays (FPGAs). The architecture eliminates multipliers and sequential processing by storing the pre-computed modulated cosine and sine carriers in ROM look-up-tables (LUTs). The high-speed input data stream is parallel processed using the corresponding LUTs, which reduces the main processing speed, allowing the use of low cost FPGAs.

Pao, Hsueh-Yuan (Livermore, CA); Tran, Binh-Nien (San Ramon, CA)

2008-05-27T23:59:59.000Z

377

Evaluation of High-Temperature Exposure of Photovoltaic Modules: Preprint  

SciTech Connect (OSTI)

This paper documents measured and modeled PV-module temperatures and evaluates these in the context of the requirements for accelerated testing.

Kurtz, S.; Miller, D.; Kempe, M.; Bosco, N.; Whitefield, K.; Wohlgemuth, J.; Dhere, N.; Zgonena, T.

2009-06-01T23:59:59.000Z

378

The MARX Modulator Development Program for the International Linear Collider  

SciTech Connect (OSTI)

The ILC Marx Modulator Development Program at SLAC is working towards developing a full-scale ILC Marx ''Reference Design'' modulator prototype, with the goal of significantly reducing the size and cost of the ILC modulator while improving overall modulator efficiency and availability. The ILC Reference Design prototype will provide a proof-of-concept model to industry in advance of Phase II SBIR funding, and also allow operation of the new 10MW L-Band Klystron prototypes immediately upon their arrival at SLAC.

Leyh, G.E.; /SLAC

2006-06-12T23:59:59.000Z

379

GIZ Sourcebook Module 5h: Urban Transport and Energy Efficiency...  

Open Energy Info (EERE)

h: Urban Transport and Energy Efficiency Jump to: navigation, search Tool Summary LAUNCH TOOL Name: GIZ Sourcebook Module 5h: Urban Transport and Energy Efficiency AgencyCompany...

380

GIZ Sourcebook Module 5f: Adapting Urban Transport to Climate...  

Open Energy Info (EERE)

f: Adapting Urban Transport to Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: GIZ Sourcebook Module 5f: Adapting Urban Transport to Climate Change...

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Adapting Urban Transport to Climate Change- Module 5f - Sustainable...  

Open Energy Info (EERE)

Adapting Urban Transport to Climate Change- Module 5f - Sustainable transport: a sourcebook for policy-makers in developing cities Jump to: navigation, search Tool Summary LAUNCH...

382

GIZ Sourcebook Module 5e: Transport and Climate Change | Open...  

Open Energy Info (EERE)

e: Transport and Climate Change Jump to: navigation, search Tool Summary LAUNCH TOOL Name: GIZ Sourcebook Module 5e: Transport and Climate Change AgencyCompany Organization: GIZ...

383

iterative regularization in intensity-modulated radiation therapy ...  

E-Print Network [OSTI]

the overall deliverable treatment is of high quality and obtained at less expense ...... Intensity modulated photon beams subject to a minimal surface smoothing.

2005-06-01T23:59:59.000Z

384

Combined hairpin-antisense compositions and methods for modulating expression  

DOE Patents [OSTI]

A nucleotide construct comprising a nucleotide sequence that forms a stem and a loop, wherein the loop comprises a nucleotide sequence that modulates expression of a target, wherein the stem comprises a nucleotide sequence that modulates expression of a target, and wherein the target modulated by the nucleotide sequence in the loop and the target modulated by the nucleotide sequence in the stem may be the same or different. Vectors, methods of regulating target expression, methods of providing a cell, and methods of treating conditions comprising the nucleotide sequence are also disclosed.

Shanklin, John; Nguyen, Tam

2014-08-05T23:59:59.000Z

385

Concentrator Solar Cell Modules and Systems Developed in Japan  

Science Journals Connector (OSTI)

Dissemination of photovoltaic (PV) systems has advanced, and solar cell module production has also significantly increased in ... Japan organized by the New Energy and Industrial Technology Development Organizati...

2007-01-01T23:59:59.000Z

386

High Heat Flux Thermoelectric Module Using Standard Bulk Material  

Broader source: Energy.gov [DOE]

Presents high heat flux thermoelectric module design for cooling using a novel V-shaped shunt configuration with bulk TE elements achieving high area packing fractions

387

V-216: Drupal Monster Menus Module Security Bypass and Script...  

Office of Environmental Management (EM)

Module Security Bypass and Denial of Service Vulnerability U-162: Drupal Multiple Vulnerabilities V-052: Drupal Core Access Bypass and Arbitrary PHP Code Execution Vulnerabilities...

388

V-186: Drupal Login Security Module Security Bypass and Denial...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

U-162: Drupal Multiple Vulnerabilities V-052: Drupal Core Access Bypass and Arbitrary PHP Code Execution Vulnerabilities V-216: Drupal Monster Menus Module Security Bypass and...

389

T-674: Drupal Secure Password Hashes Module Security Bypass Vulnerabil...  

Broader source: Energy.gov (indexed) [DOE]

or later. Addthis Related Articles V-052: Drupal Core Access Bypass and Arbitrary PHP Code Execution Vulnerabilities V-216: Drupal Monster Menus Module Security Bypass and...

390

Ultrafast population dynamics in electrically modulated terahertz quantum cascade lasers  

Science Journals Connector (OSTI)

The ultrafast population dynamics in electrically modulated three-well terahertz quantum cascade lasers (QCLs) is studied by using the self-consistent BlochPoisson equations. In the modulation process, the non-equilibrium oscillations of the population inversion are found before the population equilibrium recovers. The equilibrium formation time increases nonlinearly with the period number. This phenomenon stems from the non-uniform distribution of the electric potential. In different periods, different responses to the electrical modulation are also explored. An in-depth understanding of electron transport in the cascade structure is obtained. Finally, we demonstrate the feasibility of a modulation frequency up to gigahertz in terahertz QCLs.

F Wang; X G Guo; C Wang; J C Cao

2013-01-01T23:59:59.000Z

391

Characterization of Dynamic Loads on Solar Modules with Respect...  

Broader source: Energy.gov (indexed) [DOE]

78 CHARACTERIZATION OF DYNAMIC LOADS ON SOLAR MODULES WITH RESPECT TO FRACTURE OF SOLAR CELLS Sascha Dietrich, Matthias Pander, Martin Sander, Matthias Ebert & Fraunhofer - Center...

392

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser....

393

Materials, Modules, and Systems: An Atoms to Autos Approach to...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

of Thermal to Electrical Energy Conversion of High Temperature Skutterudite-Based Thermoelectric Modules Mechanical and Elastic Property Evaluation of n- and p-type Skutterudites...

394

Assumptions to the Annual Energy Outlook 2002 - Industrial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Industrial Demand Module Industrial Demand Module The NEMS Industrial Demand Module estimates energy consumption by energy source (fuels and feedstocks) for 9 manufacturing and 6 nonmanufacturing industries. The manufacturing industries are further subdivided into the energy-intensive manufacturing industries and nonenergy-intensive manufacturing industries. The distinction between the two sets of manufacturing industries pertains to the level of modeling. The manufacturing industries are modeled through the use of a detailed process flow or end use accounting procedure, whereas the nonmanufacturing industries are modeled with substantially less detail (Table 19). The Industrial Demand Module forecasts energy consumption at the four Census region levels; energy consumption at the Census Division level is allocated

395

Introduction to the Buildings Sector Module of SEDS  

E-Print Network [OSTI]

Ma. CBECS, Commercial Building Energy Consumption Survey,R. , and Lai, J. A Buildings Module for the Stochasticon Energy Efficiency in Buildings, August 17 22, 2008,

DeForest, Nicholas

2011-01-01T23:59:59.000Z

396

High voltage photo switch package module  

DOE Patents [OSTI]

A photo-conductive switch package module having a photo-conductive substrate or wafer with opposing electrode-interface surfaces, and at least one light-input surface. First metallic layers are formed on the electrode-interface surfaces, and one or more optical waveguides having input and output ends are bonded to the substrate so that the output end of each waveguide is bonded to a corresponding one of the light-input surfaces of the photo-conductive substrate. This forms a waveguide-substrate interface for coupling light into the photo-conductive wafer. A dielectric material such as epoxy is then used to encapsulate the photo-conductive substrate and optical waveguide so that only the metallic layers and the input end of the optical waveguide are exposed. Second metallic layers are then formed on the first metallic layers so that the waveguide-substrate interface is positioned under the second metallic layers.

Sullivan, James S; Sanders, David M; Hawkins, Steven A; Sampayan, Stephen E

2014-02-18T23:59:59.000Z

397

Solid oxide fuel cell matrix and modules  

DOE Patents [OSTI]

Porous refractory ceramic blocks arranged in an abutting, stacked configuration and forming a three dimensional array provide a support structure and coupling means for a plurality of solid oxide fuel cells (SOFCs). The stack of ceramic blocks is self-supporting, with a plurality of such stacked arrays forming a matrix enclosed in an insulating refractory brick structure having an outer steel layer. The necessary connections for air, fuel, burnt gas, and anode and cathode connections are provided through the brick and steel outer shell. The ceramic blocks are so designed with respect to the strings of modules that by simple and logical design the strings could be replaced by hot reloading if one should fail. The hot reloading concept has not been included in any previous designs. 11 figs.

Riley, B.

1988-04-22T23:59:59.000Z

398

Modulated order in classical magnetoelastic chains  

SciTech Connect (OSTI)

We investigate the nature of modulated lattice distortions that can occur in a two-dimensional array of classical magnetoelastic chains coupled together by elastic interactions only. The phase diagram for the lattice structure is obtained by numerically minimizing a one-dimensional, temperature-dependent, effective-free-energy functional of the elastic variables. At zero temperature, only phases where the winding number is uniquely defined are found, and the transitions among these phases are suggestive of a complete devil's-staircase behavior. These numerical results are consistent with N. Ishimura's analytic demonstration that such a staircase exists (J. Phys. Soc. Jpn. 54, 4752 (1985)). At finite temperatures, phases where the winding number is not uniquely defined are found and, in addition, first- and second-order transitions appear. Also of interest are superdegenerate lines where the equilibrium phase is composed of noninteracting solitons of zero energy.

Marchand, M.; Caille, A.

1988-09-01T23:59:59.000Z

399

Power System Equipment Module Test Project  

SciTech Connect (OSTI)

The technology of electric power generation when applying the binary process to hydrothermal resources had not yet been demonstrated in the United States. Accordingly, on November 10, 1977, the Electric Power Research Institute and the Department of Energy, acting through the Lawrence Berkeley Laboratory, agreed to cofund the Power System Equipment Module Test Project. The Power System Equipment Module Test Project consisted of a field test program to accomplish the objectives listed below while heating hydrocarbon fluids to above their critical points, expanding these fluids, and subsequently, condensing them below their critical points: (1) Verify the performance of state-of-the-art heat exchangers in geothermal service; (2) Verify the heat exchangers' performance heating either selected pure light hydrocarbons or selected mixtures of light hydrocarbons in the vicinity of their respective critical pressures and temperatures; (3) Establish overall heat transfer coefficients that might be used for design of commercial-size geothermal power plants using the same geothermal brine and light hydrocarbon working fluids; (4) Perform and investigate the above under representative fluid operating conditions during which the production wells would be pumped. The project was accomplished by diverting approximately 200 gpm of the flow from one of Magma Power Company's geothermal wells in the East Mesa Geothermal Field. After the heat was removed from the geothermal brine flow, the cooled flow was returned to Magma Power Company and recombined with the main brine stream for disposal by reinjection. Approximately five thermal megawatts was transferred from geothermal brine to hydrocarbon working fluids in a closed system. This heat was removed from the working fluids in a condenser and subsequently rejected to the environment by a wet cooling tower. The thermodynamic performance of both the working fluids and the system components was measured during the test program to achieve the project's objectives.

Schilling, J.R.

1980-12-01T23:59:59.000Z

400

Assumptions to the Annual Energy Outlook - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module Assumption to the Annual Energy Outlook Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and Census Division and prices for each energy source for each of the nine Census Divisions (see Figure 5). The Residential Demand Module also requires projections of available equipment and their installed costs over the forecast horizon. Over time, equipment efficiency tends to increase because of general technological advances and also because of Federal and/or state efficiency standards. As energy prices and available equipment changes over the forecast horizon, the module includes projected changes to the type and efficiency of equipment purchased as well as projected changes in the usage intensity of the equipment stock.

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Low-Cost Thermocouple Signal-Conditioning Module  

Science Journals Connector (OSTI)

Low-Cost Thermocouple Signal-Conditioning Module ... In this article we present a signal-conditioning module, based on the AD594C chip (Analog Devices, Inc.), which can be easily built at low cost and overcomes the drawbacks associated with thermocouple use. ... Cost-Effective Teacher ...

Michael F. Cunningham; Marcelo K. Lenzi; Fabricio M. Silva; Enrique L. Lima; Jos Carlos Pinto

2005-01-01T23:59:59.000Z

402

Comparison of Predictive Models for Photovoltaic Module Performance: Preprint  

SciTech Connect (OSTI)

This paper examines three models used to estimate the performance of photovoltaic (PV) modules when the irradiances and PV cell temperatures are known. The results presented here were obtained by comparing modeled and measured maximum power (Pm) for PV modules that rely on different technologies.

Marion, B.

2008-05-01T23:59:59.000Z

403

Simulation of Modulated Electron Beams in an Rf Electron Gun  

SciTech Connect (OSTI)

Computer simulations are used to investigate the evolution of longitudinal density and energy modulations of an electron beam in a linear accelerator system. This study examines the effect of initial energy spread on the modulations as the beam is accelerated in the electron gun.

Neuman, C. P. [Department of Physics, Queensborough Community College of the City University of New York, Bayside, NY 11364 (United States); O'Shea, P. G. [Department of Electrical and Computer Engineering, University of Maryland, College Park, MD 20742 (United States)

2010-11-04T23:59:59.000Z

404

Development of Systems to Improve Cotton Module Shape  

E-Print Network [OSTI]

was used to direct the operator to move cotton to appropriate locations. The system correctly predicted the height of 67% of data points. Use of the feedback system resulted in a 55% reduction in water collection area of the modules. The module builder...

Hardin, Robert Glen

2011-10-21T23:59:59.000Z

405

Secure upgrade of hardware security modules in bank networks  

Science Journals Connector (OSTI)

We study the secure upgrade of critical components in wide networked systems, focussing on the case study of PIN processing Hardware Security Modules (HSMs). These tamper-resistant devices, used by banks to securely transmit and verify the PIN typed ... Keywords: PIN processing, hardware security modules, security APIs, upgrade strategies

Riccardo Focardi; Flaminia L. Luccio

2010-03-01T23:59:59.000Z

406

Calibrated Continuous-Time Sigma-Delta Modulators  

E-Print Network [OSTI]

of The Basic Closed-Loop System ...................................................................................... 103 4.8 Appendix B: System Simulation in Simulink .......................... 108 V A 25MHZ BANDWIDTH 5TH-ORDER CONTINUOUS... ................................................. 65 Fig. 4.3. Block diagram of the 6th-order modulator architecture .................... 66 Fig. 4.4. The Simulink model of the proposed modulator with all non...

Lu, Cho-Ying

2010-07-14T23:59:59.000Z

407

Dual periodicities in the rotational modulation of Saturn narrowband emissions  

E-Print Network [OSTI]

Dual periodicities in the rotational modulation of Saturn narrowband emissions S.Y. Ye,1 D. A emissions is examined, restricting the spacecraft location to either the northern or the southern hemisphere of Saturn. It is found that in both hemispheres, the modulation period of 5 kHz narrowband emissions has two

Gurnett, Donald A.

408

Photovoltaic Module Reliability Workshop 2014: February 25-26, 2014  

SciTech Connect (OSTI)

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Kurtz, S.

2014-02-01T23:59:59.000Z

409

Recent Upgrade of the Klystron Modulator at SLAC  

SciTech Connect (OSTI)

The SLAC National Accelerator Laboratory employs 244 klystron modulators on its two-mile-long linear accelerator that has been operational since the early days of the SLAC establishment in the sixties. Each of these original modulators was designed to provide 250 kV, 262 A and 3.5 {mu}S at up to 360 pps using an inductance-capacitance resonant charging system, a modified type-E pulse-forming network (PFN), and a pulse transformer. The modulator internal control comprised of large step-start resistor-contactors, vacuum-tube amplifiers, and 120 Vac relays for logical signals. A major, power-component-only upgrade, which began in 1983 to accommodate the required beam energy of the SLAC Linear Collider (SLC) project, raised the modulator peak output capacity to 360 kV, 420 A and 5.0 {mu}S at a reduced pulse repetition rate of 120 pps. In an effort to improve safety, performance, reliability and maintainability of the modulator, this recent upgrade focuses on the remaining three-phase AC power input and modulator controls. The upgrade includes the utilization of primary SCR phase control rectifiers, integrated fault protection and voltage regulation circuitries, and programmable logic controllers (PLC) -- with an emphasis on component physical layouts for safety and maintainability concerns. In this paper, we will describe the design and implementation of each upgraded component in the modulator control system. We will also report the testing and present status of the modified modulators.

Nguyen, M.N.; Burkhart, C.P.; Lam, B.K.; Morris, B.; /SLAC

2011-11-04T23:59:59.000Z

410

Optoelectronic Multi-Chip Module Demonstrator System Jason D. Bakos  

E-Print Network [OSTI]

Optoelectronic Multi-Chip Module Demonstrator System Jason D. Bakos Department of Computer Science of Pittsburgh don@ee.pitt.edu Abstract Much research has been conducted in the area of optoelectronic optoelectronic chip-to-chip interconnection, or "optoelectronic multi-chip modules" (OE-MCM's). Most current

Bakos, Jason D.

411

Holonomic D-module with Betti structure Takuro MOCHIZUKI  

E-Print Network [OSTI]

RIMS-1688 Holonomic D-module with Betti structure By Takuro MOCHIZUKI January 2010 RESEARCH INSTITUTE FOR MATHEMATICAL SCIENCES KYOTO UNIVERSITY, Kyoto, Japan #12;Holonomic D-module with Betti structure Takuro Mochizuki Abstract This is an attempt to define a notion of Betti structure with nice

412

Photovoltaic Module Reliability Workshop 2013: February 26-27, 2013  

SciTech Connect (OSTI)

NREL's Photovoltaic (PV) Module Reliability Workshop (PVMRW) brings together PV reliability experts to share information, leading to the improvement of PV module reliability. Such improvement reduces the cost of solar electricity and promotes investor confidence in the technology--both critical goals for moving PV technologies deeper into the electricity marketplace.

Kurtz, S.

2013-10-01T23:59:59.000Z

413

Differential Turbo Coded Modulation with APP Channel Estimation  

E-Print Network [OSTI]

Differential Turbo Coded Modulation with APP Channel Estimation Sheryl L. Howard and Christian, iterative decoding. I. INTRODUCTION With the advent of turbo codes [1], [2] and iterative de- coding in very high noise/low signal- to-noise ratio (SNR) environments. Turbo trellis coded modulation (TTCM

Howard, Sheryl

414

Selectively-undercut traveling-wave electroabsorption modulators  

E-Print Network [OSTI]

. Piprek, and J. Bowers, "Selective undercut etching of InGaAs and InGaAsP quantum wells for improved-wet-etching-active-region traveling-wave electro- absorption modulator," in in Proceedings IEEE LEOS 18, 2005, pp. 426­427. 6. Y- absorption modulators based on undercut-etching the active-region," IEEE Photon. Technol. Lett. 17, 2065

Coldren, Larry A.

415

MODULE DESCRIPTION FORM CL 961 Geographical Information Systems (GIS)  

E-Print Network [OSTI]

MODULE DESCRIPTION FORM CL 961 Geographical Information Systems (GIS) Module Registrar: Dr Elsa current state-of-the-art Geographical Information Systems (GIS). GIS are spatial databases that can handle of living in different areas is related to health and disease. Although GIS is a crucial analytical tool

Mottram, Nigel

416

Modulated optical solid-state spectrometer applications in plasma diagnostics  

E-Print Network [OSTI]

Modulated optical solid-state spectrometer applications in plasma diagnostics John Howard Plasma A new electro-optically modulated optical solid-state MOSS interferometer has been constructed for the measurement of the low order spectral moments of line emission from optically thin radiant media

Howard, John

417

IEEE TRANSACTIONS ON POWER ELECTRONICS 1 Discontinuous Modulation Scheme  

E-Print Network [OSTI]

originally for this inverter, activates all the10 modules of the DMCI. The new discontinuous modulation single-stage, switched mode power supply.26 I. INTRODUCTION27 FOR low-cost inverter applications, ranging topology, while the topologies outlined in [2]­[4]40 support unidirectional power flow. While several HFL-inverter

Mazumder, Sudip K.

418

Opportunities and Challenges for Power Electronics in PV Modules (Presentation)  

SciTech Connect (OSTI)

The presentation describes the value of adding DC converters and other power electronics to modules to improve their output even when shading or bad cells would otherwise decrease the module output. The presentation was part of a workshop sponsored by ARPA-E exploring the opportunities for power electronics to support PV applications.

Kurtz, S.; Deline, C.; Wohlgemuth, J.; Marion, B.; Granata, J.

2011-02-01T23:59:59.000Z

419

DAC Linearization Techniques for Sigma-delta Modulators  

E-Print Network [OSTI]

Digital-to-Analog Converters (DAC) form the feedback element in sigma-delta modulators. Any non-linearity in the DAC directly degrades the linearity of the modulator at low and medium frequencies. Hence, there is a need for designing highly linear...

Godbole, Akshay

2012-02-14T23:59:59.000Z

420

Photonic generation of UWB pulses with pulse position modulation  

E-Print Network [OSTI]

Photonic generation of UWB pulses with pulse position modulation H. Mu and J. Yao A novel photonic approach to generating ultra-wideband (UWB) signals with pulse position modulation (PPM) is proposed delay-line filter for UWB monocycle pulse generation, the second subsystem being a pulse

Yao, Jianping

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Approved Module Information for EE3NPD, 2014/5 Module Title/Name: Networked Product Development Module Code: EE3NPD  

E-Print Network [OSTI]

), and Bitcoin. . To study the associated range of enabling technologies from communications systems and software Interface (MIDI) * Bitcoin Module Delivery Methods of Delivery & Learning Hours (by each method): Method

Neirotti, Juan Pablo

422

Approved Module Information for EC112C, 2014/5 Module Title/Name: Geology and Soil Science Module Code: EC112C  

E-Print Network [OSTI]

series. Land use capability. Corporate Connections: 2 quarries are visited during the Geology Field with mining and quarrying are highlighted. Module Delivery Methods of Delivery & Learning Hours (by each

Neirotti, Juan Pablo

423

Tematea: Issue Based Modules for Coherent Implementation of Biodiversity  

Open Energy Info (EERE)

Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Conventions Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Conventions Agency/Company /Organization: United Nations Environment Programme, International Union for Conservation of Nature Sector: Land Topics: Implementation, Co-benefits assessment, - Environmental and Biodiversity Resource Type: Guide/manual, Training materials, Lessons learned/best practices Website: www.tematea.org Tematea: Issue Based Modules for Coherent Implementation of Biodiversity Conventions Screenshot References: Tematea[1] Summary "The TEMATEA Project on Issue-Based Modules supports a better and more coherent national implementation of biodiversity-related conventions

424

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Researchers at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. Interaction of the ALS electron beam with a femtosecond laser pulse as they co-propagate through a wiggler modulates the electron energies within a short slice of the electron bunch with about the same duration as the laser pulse. This causes a dispersion of the electron trajectories, and the bunch develops a hole that emits short pulses of temporally and spatially coherent terahertz pulses synchronized to the laser. The technique allows tremendous flexibility in shaping the terahertz pulses by appropriate modulation of the laser pulse.

425

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tailored Terahertz Pulses from a Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Wednesday, 29 November 2006 00:00 Researchers at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. Interaction of the ALS electron beam with a femtosecond laser pulse as they co-propagate through a wiggler modulates the electron energies within a short slice of the electron bunch with about the same duration as the laser pulse. This causes a dispersion of the electron trajectories, and the bunch develops a hole that emits short pulses of temporally and spatially coherent terahertz pulses synchronized to the laser. The technique allows tremendous flexibility in shaping the terahertz pulses by appropriate modulation of the laser pulse.

426

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION Order Module--NNSA OCCUPATIONAL RADIATION PROTECTION The familiar level of this module is designed to provide the basic information to meet the requirements that are related to 10 CFR 835, "Occupational Radiation Protection," in the following DOE Functional Area Qualification Standards: DOE-STD-1177-2004, Emergency Management DOE-STD-1151-2002, Facility Representative DOE-STD-1146-2007, General Technical Base DOE-STD-1138-2007, Industrial Hygiene DOE-STD-1183-2007, Nuclear Safety Specialist DOE-STD-1174-2003, Radiation Protection DOE-STD-1175-2006, Senior Technical Safety Manager DOE-STD-1178-2004, Technical Program Manager DOE-STD-1155-2002, Transportation and Traffic Management DOE Order Self Study Modules - 10 CFR 835 Occupational Radiation Protection

427

Assumptions to the Annual Energy Outlook 2002 - Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2002, DOE/EIA- M068(2002) January 2002. Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are

428

Assumptions to the Annual Energy Outlook 2002 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and

429

Assumptions to the Annual Energy Outlook 2001 - Electricity Market Module  

Gasoline and Diesel Fuel Update (EIA)

Electricity Market Module Electricity Market Module The NEMS Electricity Market Module (EMM) represents the capacity planning, dispatching, and pricing of electricity. It is composed of four submodules—electricity capacity planning, electricity fuel dispatching, load and demand-side management, and electricity finance and pricing. It includes nonutility capacity and generation, and electricity transmission and trade. A detailed description of the EMM is provided in the EIA publication, Electricity Market Module of the National Energy Modeling System 2001, DOE/EIA- M068(2001) January 2001. Based on fuel prices and electricity demands provided by the other modules of the NEMS, the EMM determines the most economical way to supply electricity, within environmental and operational constraints. There are

430

Assumptions to the Annual Energy Outlook 2001 - Residential Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Residential Demand Module Residential Demand Module The NEMS Residential Demand Module forecasts future residential sector energy requirements based on projections of the number of households and the stock, efficiency, and intensity of use of energy-consuming equipment. The Residential Demand Module projections begin with a base year estimates of the housing stock, the types and numbers of energy-consuming appliances servicing the stock, and the “unit energy consumption” by appliance (or UEC—in million Btu per household per year). The projection process adds new housing units to the stock, determines the equipment installed in new units, retires existing housing units, and retires and replaces appliances. The primary exogenous drivers for the module are housing starts by type (single-family, multifamily and mobile homes) and

431

Delta-N formalism for curvaton with modulated decay  

SciTech Connect (OSTI)

In this paper, the curvature perturbation generated by the modulated curvaton decay is studied by a direct application of ?N-formalism. Our method has a sharp contrast with the non-linear formalism which may be regarded as an indirect usage of ?N-formalism. We first show that our method can readily reproduce results in previous works of modulation of curvaton. Then we move on to calculate the case where the curvaton mass (and hence also the decay rate) is modulated. The method can be applied to the calculation of the modulation in the freezeout model, in which the heavy species are considered instead of the curvaton. Our method explains curvaton and various modulation on an equal footing.

Kohri, Kazunori [Cosmophysics group, Theory Center, IPNS, KEK, and The Graduate University for Advanced Study (Sokendai), Tsukuba 305-0801 (Japan); Lin, Chia-Min [Department of Physics, Kobe University, Kobe 657-8501 (Japan); Matsuda, Tomohiro, E-mail: kohri@post.kek.jp, E-mail: cmlin@boar.kobe-u.ac.jp, E-mail: matsuda@sit.ac.jp [Laboratory of Physics, Saitama Institute of Technology, Fukaya, Saitama 369-0293 (Japan)

2013-06-01T23:59:59.000Z

432

Development of Combined Opto-Acoustical Sensor Modules  

E-Print Network [OSTI]

The faint fluxes of cosmic neutrinos expected at very high energies require large instrumented detector volumes. The necessary volumes in combination with a sufficient shielding against background constitute forbidding and complex environments (e.g. the deep sea) as sites for neutrino telescopes. To withstand these environments and to assure the data quality, the sensors have to be reliable and their operation has to be as simple as possible. A compact sensor module design including all necessary components for data acquisition and module calibration would simplify the detector mechanics and ensures the long term operability of the detector. The compact design discussed here combines optical and acoustical sensors inside one module, therefore reducing electronics and additional external instruments for calibration purposes. In this design the acoustical sensor is primary used for acoustic positioning of the module. The module may also be used for acoustic particle detection and marine science if an appropriat...

Enzenhfer, A; Graf, K; Hl, J; Katz, U; Lahmann, R; Neff, M; Richardt, C

2011-01-01T23:59:59.000Z

433

Design of double passive modulated mode-locked lasers  

SciTech Connect (OSTI)

A set of equations is obtained that allow the determination of the optimum values for the laser parameters in order to obtain perfect mode-locking by double passive modulation. The double modulation consists of a fast saturable absorber and a passive loss proportional to the mean intensity in the cavity provided by a passively driven electro-optic modulator. The stochastic nature of the emission of conventional passive modulated systems is eliminated if the correct values of the modulation parameters are chosen as predicted by the equations presented here. The predictions given by the equations were compared with previous numerical computations in order to check the validity of certain approximations used. Experimental results obtained confirm the predictions given by said equations.

Martinez, O.E.

1983-02-01T23:59:59.000Z

434

Characterization of Field Exposed Thin Film Modules: Preprint  

SciTech Connect (OSTI)

Test arrays of thin film modules have been deployed at the Solar Energy Centre near New Delhi, India since 2002-2003. Performances of these arrays were reported by O.S. Sastry [1]. This paper reports on NREL efforts to support SEC by performing detailed characterization of selected modules from the array. Modules were selected to demonstrate both average and worst case power loss over the 8 years of outdoor exposure. The modules characterized included CdTe, CIS and three different types of a-Si. All but one of the a-Si types were glass-glass construction. None of the modules had edge seals. Detailed results of these tests are presented along with our conclusions about the causes of the power loss for each technology.

Wohlgemuth, J. H.; Sastry, O. S.; Stokes, A.; Singh, Y. K.; Kumar, M.

2012-06-01T23:59:59.000Z

435

Research Opportunities in Reliability of Photovoltaic Modules (Presentation)  

SciTech Connect (OSTI)

The motivation for an increased scope and a more proactive effort in reliability research of photovoltaic modules and systems includes reducing the levelized cost of energy and gaining better confidence in the energy and financial payback for photovoltaic systems. This increased reliability and confidence will lead to greater penetration of photovoltaics in the energy portfolio and greater employment in photovoltaics and related industries. Present research needs include the fundamental degradation mechanisms of polymers, connectors and other module components, mapping of failure mechanisms observed in the field to those in accelerated lifetime tests, determining the acceleration factors, and improving standards for modules such that tests can appropriately be assigned to evaluate their long term durability. Specific mechanisms discussed are corrosion in module components, metastability in thin-film active layers, delamination and loss of elastic properties in module polymeric materials, and inverter failure. Presently, there is hiring of reliability scientists and engineers at many levels of the value chain for photovoltaics.

Hacke, P.

2010-05-01T23:59:59.000Z

436

COSMIC RAY MODULATION BEYOND THE HELIOPAUSE: A HYBRID MODELING APPROACH  

SciTech Connect (OSTI)

Results from a newly developed hybrid cosmic ray (CR) modulation model are presented. In this approach, the transport of CRs is computed by incorporating the plasma flow from a magnetohydrodynamic model for the heliospheric environment, resulting in representative CR transport. The model is applied to the modulation of CRs beyond the heliopause (HP) and we show that (1) CR modulation persists beyond the HP, so it is unlikely that the Voyager spacecraft will measure the pristine local interstellar spectra of galactic CRs when crossing the HP. (2) CR modulation in the outer heliosheath could maintain solar-cycle-related changes. (3) The modulation of CRs in the outer heliosheath is primarily determined by the ratio of perpendicular to parallel diffusion, so that the value of the individual diffusion coefficients cannot be determined uniquely using this approach. (4) CRs can efficiently diffuse between the nose and tail regions of the heliosphere.

Strauss, R. D.; Potgieter, M. S.; Ferreira, S. E. S. [Centre for Space Research, North-West University, Potchefstroom Campus, Private Bag X6001, Potchefstroom 2520 (South Africa); Fichtner, H.; Scherer, K., E-mail: dutoit.strauss@nwu.ac.za [Institut fuer Theoretische Physik, Lehrstuhl IV: Weltraum- und Astrophysik, Ruhr-Universitaet Bochum, D-44780 Bochum (Germany)

2013-03-01T23:59:59.000Z

437

Modulational instability of electromagnetic waves in a collisional quantum magnetoplasma  

SciTech Connect (OSTI)

The modulational instability of right-hand circularly polarized electromagnetic electron cyclotron (CPEM-EC) wave in a magnetized quantum plasma is studied taking into account the collisional effects. Employing quantum hydrodynamic and nonlinear Schrdinger equations, the dispersion relation of modulated CPEM-EC wave in a collisional plasma has been derived. It is found that this wave is unstable in such a plasma system and the growth rate of the associated instability depends on various parameters such as electron Fermi temperature, plasma number density, collision frequency, and modulation wavenumber. It is shown that while the increase of collision frequency leads to increase of the growth rate of instability, especially at large wavenumber limit, the increase of plasma number density results in more stable modulated CPEM-EC wave. It is also found that in contrast to collisionless plasma in which modulational instability is restricted to small wavenumbers, in collisional plasma, the interval of instability occurrence can be extended to a large domain.

Niknam, A. R., E-mail: a-niknam@sbu.ac.ir [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Tehran (Iran, Islamic Republic of); Rastbood, E.; Bafandeh, F.; Khorashadizadeh, S. M., E-mail: smkhorashadi@birjand.ac.ir [Physics Department of Birjand University, Birjand (Iran, Islamic Republic of)

2014-04-15T23:59:59.000Z

438

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Researchers at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. Interaction of the ALS electron beam with a femtosecond laser pulse as they co-propagate through a wiggler modulates the electron energies within a short slice of the electron bunch with about the same duration as the laser pulse. This causes a dispersion of the electron trajectories, and the bunch develops a hole that emits short pulses of temporally and spatially coherent terahertz pulses synchronized to the laser. The technique allows tremendous flexibility in shaping the terahertz pulses by appropriate modulation of the laser pulse.

439

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Tailored Terahertz Pulses from a Laser-Modulated Electron Beam Print Researchers at the ALS have demonstrated a new method to generate tunable, coherent, broadband terahertz radiation from a relativistic electron beam modulated by a femtosecond laser. Interaction of the ALS electron beam with a femtosecond laser pulse as they co-propagate through a wiggler modulates the electron energies within a short slice of the electron bunch with about the same duration as the laser pulse. This causes a dispersion of the electron trajectories, and the bunch develops a hole that emits short pulses of temporally and spatially coherent terahertz pulses synchronized to the laser. The technique allows tremendous flexibility in shaping the terahertz pulses by appropriate modulation of the laser pulse.

440

Development of an AC Module System: Final Technical Report  

SciTech Connect (OSTI)

The GreenRay Inc. program focused on simplifying solar electricity and making it affordable and accessible to the mainstream population. This was accomplished by integrating a solar module, micro-inverter, mounting and monitoring into a reliable, 'plug and play' AC system for residential rooftops, offering the following advantages: (1) Reduced Cost: Reduction in installation labor with fewer components, faster mounting, faster wiring. (2) Maximized Energy Production: Each AC Module operates at its maximum, reducing overall losses from shading, mismatch, or module downtime. (3) Increased Safety. Electrical and fire safety experts agree that AC Modules have significant benefits, with no energized wiring or live connections during installation, maintenance or emergency conditions. (4) Simplified PV for a Broader Group of Installers. Dramatic simplification of design and installation of a solar power system, enabling faster and more efficient delivery of the product into the market through well-established, mainstream channels. This makes solar more accessible to the public. (5) Broadened the Rooftop Market: AC Modules enable solar for many homes that have shading, split roofs, or obstructions. In addition, due to the smaller building block size of 200W vs. 1000W, homeowners with budget limitations can start small and add to their systems over time. Through this DOE program GreenRay developed the all-in-one AC Module system with an integrated PV Module and microinverter, custom residential mounting and performance monitoring. Development efforts took the product from its initial concept, through prototypes, to a commercial product sold and deployed in the residential market. This pilot deployment has demonstrated the technical effectiveness of the AC Module system in meeting the needs and solving the problems of the residential market. While more expensive than the traditional central inverter systems at the pilot scale, the economics of AC Modules become more and more favorable as the product matures and is made in high volumes. GreenRay's early customers have been highly enthusiastic about the AC Module system benefits.

Suparna Kadam; Miles Russell

2012-06-15T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Module No: 410320Electronic Transactions LawModule Title: Co-requisite:Sources of ObligationsPre-requisite  

E-Print Network [OSTI]

Module No: 410320Electronic Transactions LawModule Title: Co-requisite:Sources of Obligations that arise from the utilization of the electronic information systems based on an elucidation of the nature on the various branches of law. Electronic trade (E-commerce)is defined alongside its rules, and an overview

442

Microsoft Word - July 2008 PMCDP Module CHRIS ESS Tutorial.doc...  

Broader source: Energy.gov (indexed) [DOE]

Microsoft Word - July 2008 PMCDP Module CHRIS ESS Tutorial.doc Microsoft Word - July 2008 PMCDP Module CHRIS ESS Tutorial.doc Microsoft Word - July 2008 PMCDP Module CHRIS ESS...

443

PID-free C-Si PV Module Using Novel Chemically-Tempered Glass...  

Broader source: Energy.gov (indexed) [DOE]

PID-free C-Si PV Module Using Novel Chemically-Tempered Glass PID-free C-Si PV Module Using Novel Chemically-Tempered Glass Presented at the PV Module Reliability Workshop,...

444

Volumetric modulated arc radiotherapy for esophageal cancer  

SciTech Connect (OSTI)

A treatment planning study was performed to evaluate the performance of volumetric arc modulation with RapidArc (RA) against 3D conformal radiation therapy (3D-CRT) and conventional intensity-modulated radiation therapy (IMRT) techniques for esophageal cancer. Computed tomgraphy scans of 10 patients were included in the study. 3D-CRT, 4-field IMRT, and single-arc and double-arc RA plans were generated with the aim to spare organs at risk (OAR) and healthy tissue while enforcing highly conformal target coverage. The planning objective was to deliver 54 Gy to the planning target volume (PTV) in 30 fractions. Plans were evaluated based on target conformity and dose-volume histograms of organs at risk (lung, spinal cord, and heart). The monitor unit (MU) and treatment delivery time were also evaluated to measure the treatment efficiency. The IMRT plan improves target conformity and spares OAR when compared with 3D-CRT. Target conformity improved with RA plans compared with IMRT. The mean lung dose was similar in all techniques. However, RA plans showed a reduction in the volume of the lung irradiated at V{sub 20Gy} and V{sub 30Gy} dose levels (range, 4.62-17.98%) compared with IMRT plans. The mean dose and D{sub 35%} of heart for the RA plans were better than the IMRT by 0.5-5.8%. Mean V{sub 10Gy} and integral dose to healthy tissue were almost similar in all techniques. But RA plans resulted in a reduced low-level dose bath (15-20 Gy) in the range of 14-16% compared with IMRT plans. The average MU needed to deliver the prescribed dose by RA technique was reduced by 20-25% compared with IMRT technique. The preliminary study on RA for esophageal cancers showed improvements in sparing OAR and healthy tissue with reduced beam-on time, whereas only double-arc RA offered improved target coverage compared with IMRT and 3D-CRT plans.

Vivekanandan, Nagarajan, E-mail: viveknaren@hotmail.com [Department of Medical Physics, Cancer Institute, Chennai (India); Sriram, Padmanaban; Syam Kumar, S.A.; Bhuvaneswari, Narayanan; Saranya, Kamalakannan [Department of Medical Physics, Cancer Institute, Chennai (India)

2012-04-01T23:59:59.000Z

445

Multi-processor including data flow accelerator module  

DOE Patents [OSTI]

An accelerator module for a data flow computer includes an intelligent memory. The module is added to a multiprocessor arrangement and uses a shared tagged memory architecture in the data flow computer. The intelligent memory module assigns locations for holding data values in correspondence with arcs leading to a node in a data dependency graph. Each primitive computation is associated with a corresponding memory cell, including a number of slots for operands needed to execute a primitive computation, a primitive identifying pointer, and linking slots for distributing the result of the cell computation to other cells requiring that result as an operand. Circuitry is provided for utilizing tag bits to determine automatically when all operands required by a processor are available and for scheduling the primitive for execution in a queue. Each memory cell of the module may be associated with any of the primitives, and the particular primitive to be executed by the processor associated with the cell is identified by providing an index, such as the cell number for the primitive, to the primitive lookup table of starting addresses. The module thus serves to perform functions previously performed by a number of sections of data flow architectures and coexists with conventional shared memory therein. A multiprocessing system including the module operates in a hybrid mode, wherein the same processing modules are used to perform some processing in a sequential mode, under immediate control of an operating system, while performing other processing in a data flow mode.

Davidson, George S. (Albuquerque, NM); Pierce, Paul E. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

446

E-Print Network 3.0 - agent triclosan modulates Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

triclosan modulates Search Powered by Explorit Topic List Advanced Search Sample search results for: agent triclosan modulates Page: << < 1 2 3 4 5 > >> 1 Oxidative Transformation...

447

E-Print Network 3.0 - alternative starter modules Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

48 CPE 345: Modeling and Today's topics Summary: - Other modules get a chance to execute Note: modules written with activity() need starter messages... to describe the network...

448

Order Module--THE CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT...  

Energy Savers [EERE]

Order Module--THE CONTROL OF HAZARDOUS ENERGY (LOCKOUTTAGOUT) FAMILIAR LEVEL Order Module--THE CONTROL OF HAZARDOUS ENERGY (LOCKOUTTAGOUT) FAMILIAR LEVEL The familiar level of...

449

E-Print Network 3.0 - amorphous silicon modules Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: amorphous silicon modules Page: << < 1 2 3 4 5 > >> 1 Institute of Energy Conversion University of Delaware Summary: modules. Consulted for a research...

450

Evaluation of Thermal to Electrical Energy Conversion of High Temperature Skutterudite-Based Thermoelectric Modules  

Broader source: Energy.gov [DOE]

Discusses progress toward the fabrication of a skutterudite-based TE module and provides module performance data under operating conditions similar to those for automotive applications

451

Doppler effect's contribution to ultrasonic modulation of multiply scattered coherent light: Monte Carlo modeling  

Science Journals Connector (OSTI)

Modulation of light by ultrasound in turbid media is investigated by modified public domain software based on the Monte Carlo algorithm. Apart from the recognized modulation...

Elazar, Jovan M; Steshenko, Oleg

2008-01-01T23:59:59.000Z

452

E-Print Network 3.0 - anoxygenic photosynthesis modulated Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

photosynthesis modulated Search Powered by Explorit Topic List Advanced Search Sample search results for: anoxygenic photosynthesis modulated Page: << < 1 2 3 4 5 > >> 1 Anoxygenic...

453

Electrochemically Modulated Separation for Plutonium Safeguards  

SciTech Connect (OSTI)

Accurate and timely analysis of plutonium in spent nuclear fuel is critical in nuclear safeguards for detection of both protracted and rapid plutonium diversions. Gamma spectroscopy is a viable method for accurate and timely measurements of plutonium provided that the plutonium is well separated from the interfering fission and activation products present in spent nuclear fuel. Electrochemically modulated separation (EMS) is a method that has been used successfully to isolate picogram amounts of Pu from nitric acid matrices. With EMS, Pu adsorption may be turned "on" and "off" depending on the applied voltage, allowing for collection and stripping of Pu without the addition of chemical reagents. In this work, we have scaled up the EMS process to isolate microgram quantities of Pu from matrices encountered in spent nuclear fuel during reprocessing. Several challenges have been addressed including surface area limitations, radiolysis effects, electrochemical cell performance stability, and chemical interferences. After these challenges were resolved, 6 g Pu was deposited in the electrochemical cell with approximately an 800-fold reduction of fission and activation product levels from a spent nuclear fuel sample. Modeling showed that these levels of Pu collection and interference reduction may not be sufficient for Pu detection by gamma spectroscopy. The main remaining challenges are to achieve a more complete Pu isolation and to deposit larger quantities of Pu for successful gamma analysis of Pu. If gamma analyses of Pu are successful, EMS will allow for accurate and timely on-site analysis for enhanced Pu safeguards.

Pratt, Sandra H.; Breshears, Andrew T.; Arrigo, Leah M.; Schwantes, Jon M.; Duckworth, Douglas C.

2013-12-31T23:59:59.000Z

454

Electrochromic window with high reflectivity modulation  

DOE Patents [OSTI]

A multi-layered, active, thin film, solid-state electrochromic device having a high reflectivity in the near infrared in a colored state, a high reflectivity and transmissivity modulation when switching between colored and bleached states, a low absorptivity in the near infrared, and fast switching times, and methods for its manufacture and switching are provided. In one embodiment, a multi-layered device comprising a first indium tin oxide transparent electronic conductor, a transparent ion blocking layer, a tungsten oxide electrochromic anode, a lithium ion conducting-electrically resistive electrolyte, a complimentary lithium mixed metal oxide electrochromic cathode, a transparent ohmic contact layer, a second indium oxide transparent electronic conductor, and a silicon nitride encapsulant is provided. Through elimination of optional intermediate layers, simplified device designs are provided as alternative embodiments. Typical colored-state reflectivity of the multi-layered device is greater than 50% in the near infrared, bleached-state reflectivity is less than 40% in the visible, bleached-state transmissivity is greater than 60% in the near infrared and greater than 40% in the visible, and spectral absorbance is less than 50% in the range from 0.65-2.5 .mu.m.

Goldner, Ronald B. (Lexington, MA); Gerouki, Alexandra (Medford, MA); Liu, Te-Yang (Arlington, MA); Goldner, Mark A. (Cambridge, MA); Haas, Terry E. (Southborough, MA)

2000-01-01T23:59:59.000Z

455

Solid oxide fuel cell matrix and modules  

DOE Patents [OSTI]

Porous refractory ceramic blocks arranged in an abutting, stacked configuration and forming a three dimensional array provide a support structure and coupling means for a plurality of solid oxide fuel cells (SOFCs). Each of the blocks includes a square center channel which forms a vertical shaft when the blocks are arranged in a stacked array. Positioned within the channel is a SOFC unit cell such that a plurality of such SOFC units disposed within a vertical shaft form a string of SOFC units coupled in series. A first pair of facing inner walls of each of the blocks each include an interconnecting channel hole cut horizontally and vertically into the block walls to form gas exit channels. A second pair of facing lateral walls of each block further include a pair of inner half circular grooves which form sleeves to accommodate anode fuel and cathode air tubes. The stack of ceramic blocks is self-supporting, with a plurality of such stacked arrays forming a matrix enclosed in an insulating refractory brick structure having an outer steel layer. The necessary connections for air, fuel, burnt gas, and anode and cathode connections are provided through the brick and steel outer shell. The ceramic blocks are so designed with respect to the strings of modules that by simple and logical design the strings could be replaced by hot reloading if one should fail. The hot reloading concept has not been included in any previous designs.

Riley, Brian (Willimantic, CT)

1990-01-01T23:59:59.000Z

456

Thermionic generator module with heat pipes  

SciTech Connect (OSTI)

A thermionic converter module is described comprising: a first heat pipe with an annular casing which has a first surface located on an inside surface of the annular casing, at least part of the first surface of the casing of the first heat pipe having constructed upon it a thermionic converter emitter located so that heat will be transferred by conduction from the first heat pipe casing to the thermionic converter emitter; a second heat pipe with a casing which has a second surface, the second surface being located within the first surface of the annular casing of the first heat pipe so that it is surrounded by the first surface; a thermionic converter collector located so as to transfer heat by conduction to the second surface of the casing of the second heat pipe with the thermionic converter collector being adjacent to the thermionic converter emitter but being separated from the thermionic converter emitter by an inter electrode space; and end fitting structures located so that, with the thermionic converter collector and the thermionic converter emitter, they complete an enclosure around the inter electrode space and form an evacuated enclosure within which are located the thermionic converter collector and the thermionic converter emitter.

Horner-Richardson, K.; Ernst, D.M.

1993-06-15T23:59:59.000Z

457

Robust quantum data locking from phase modulation  

E-Print Network [OSTI]

Quantum data locking is a unique quantum phenomenon that allows a relatively short key to (un)lock an arbitrarily long message encoded in a quantum state, in such a way that an eavesdropper who measures the state but does not know the key has essentially no information about the encrypted message. The application of quantum data locking in cryptography would allow one to overcome the limitations of the one-time pad encryption, which requires the key to have the same length as the message. However, it is known that the strength of quantum data locking is also its Achilles heel, as the leakage of a few bits of the key or the message may in principle allow the eavesdropper to unlock a disproportionate amount of information. In this paper we show that there exist quantum data locking schemes that can be made robust against information leakage by increasing the length of the shared key by a proportionate amount. This implies that a constant size key can still encrypt an arbitrarily long message as long as a fraction of it remains secret to the eavesdropper. Moreover, we greatly simplify the structure of the protocol by proving that phase modulation suffices to generate strong locking schemes, paving the way to optical experimental realizations. Also, we show that successful data locking protocols can be constructed using random codewords, which very well could be helpful in discovering random codes for data locking over noisy quantum channels.

Cosmo Lupo; Mark M. Wilde; Seth Lloyd

2014-08-29T23:59:59.000Z

458

Standard Review Plan (SRP) Modules | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

Quality Assurance » Standard Quality Assurance » Standard Review Plan (SRP) Modules Standard Review Plan (SRP) Modules Standard Review Plan - Critical Decision Handbook Overview Project Management Project Execution Plan Review Module (RM) Risk Management RM Integrated Project Team RM Earned Value Management System RM Acquisition Strategy RM Decommissioning Plan RM Site Transition Guidance Engineering and Design Conceptual Design RM Preliminary Design RM Final Design RM Construction Readiness RM Checkout, Testing, and Commissioning Plan RM Readiness Review RM Seismic Design Expectations Report Technology Readiness Assessment Report External Technical Review Report Preparation for Facility Operations RM Safety Safety Design Strategy RM Conceptual Safety Design RM Preliminary Safety Design RM Facility Disposition Safety Strategy RM

459

High-power pulse modulator with ignitron discharger  

SciTech Connect (OSTI)

The high-power pulse modulator described here is used to produce spatial gaseous discharges and has an improved, controllable charging circuit, which permits a type ITR-4 ignitron discharger to be employed in a frequency mode as the basic commutator. The modulator is utilized in two modes: at a pulse repetition frequency of 50 Hz pulses are formed that have a duration of 25 usec and energies up to 3.5 kJ and at a frequency of 200 Hz, the pulses have a duration of -2 usec and energies up to 600 J. In all conditions the modulator operated stably with a wide range of load changes.

Anisimova, T.E.; Akkuratov, E.V.; Artemov, V.A.; Gromovenko, V.M.; Kalinin, V.P.; Nikonov, V.P.

1985-10-01T23:59:59.000Z

460

Shift-modulation invariant spaces on LCA groups  

E-Print Network [OSTI]

A $(K,\\Lambda)$ shift-modulation invariant space is a subspace of $L^2(G)$, that is invariant by translations along elements in $K$ and modulations by elements in $\\Lambda$. Here $G$ is a locally compact abelian group, and $K$ and $\\Lambda$ are closed subgroups of $G$ and the dual group $\\hat G$, respectively. In this article we provide a characterization of shift-modulation invariant spaces in this general context when $K$ and $\\Lambda$ are uniform lattices. This extends previous results known for $L^2(\\R^d)$. We develop fiberization techniques and suitable range functions adapted to LCA groups needed to provide the desired characterization.

Cabrelli, Carlos

2011-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Experience with CPV Module Failures at NREL (Presentation)  

SciTech Connect (OSTI)

The failures and performance issues associated with three years of on-sun testing of CPV modules are discussed. Pictures of various failure mechanisms and performance issues are presented. A wide array of CPV module failures and performance issues have been experienced at NREL. Many of the modules are prototypes and have not been through qualification testing. It is assumed that the qualification test would have captured many of the problems. Internal lens soiling due to condensation is not currently captured by the qualification test. Lens temperature dependence can be built into modeling if CPV is to operate in cold locations.

Muller, M.

2012-03-01T23:59:59.000Z

462

Outdoor PV Module Degradation of Current-Voltage Parameters: Preprint  

SciTech Connect (OSTI)

Photovoltaic (PV) module degradation rate analysis quantifies the loss of PV power output over time and is useful for estimating the impact of degradation on the cost of energy. An understanding of the degradation of all current-voltage (I-V) parameters helps to determine the cause of the degradation and also gives useful information for the design of the system. This study reports on data collected from 12 distinct mono- and poly-crystalline modules deployed at the National Renewable Energy Laboratory (NREL) in Golden, Colorado. Most modules investigated showed < 0.5%/year decrease in maximum power due to short-circuit current decline.

Smith, R. M.; Jordan, D. C.; Kurtz, S. R.

2012-04-01T23:59:59.000Z

463

System for fuel rod removal from a reactor module  

DOE Patents [OSTI]

A robotic system for remote underwater withdrawal of the fuel rods from fuel modules of a light water breeder reactor includes a collet/grapple assembly for gripping and removing fuel rods in each module, which is positioned by use of a winch and a radial support means attached to a vertical support tube which is mounted over the fuel module. A programmable logic controller in conjunction with a microcomputer, provides control for the accurate positioning and pulling force of the rod grapple assembly. Closed circuit television cameras are provided which aid in operator interface with the robotic system. 7 figs.

Matchett, R.L.; Fodor, G.; Kikta, T.J.; Bacvinsicas, W.S.; Roof, D.R.; Nilsen, R.J.; Wilczynski, R.

1988-07-28T23:59:59.000Z

464

Trade?off between depth and phase of modulation in the perception of pitch of complex amplitude?modulated tones  

Science Journals Connector (OSTI)

Complex amplitude?modulated (CAM) tones were generated through amplitude modulating a high?frequency carrier f carH (310 kHz) by an AM tone having a modulating frequency and a carrier f carL about 10% of f carH modulated at a rate f 0 in the 100?Hz range. CAM sounds have been shown to have a low pitch corresponding to f 0 whose discriminability decreases as the modulation of f carL is shifted from AM to QFM phase [S. Greenberg and P. L. Divenyi Proc. 18th Midwinter Mtg. ARO p. 55 (1995)]. In the present experiments pitchdiscrimination was measured for pairs of CAM tones having fixed f 0 differences but either variable depth (1%200%) or variable phase (11.5?) of modulation in the f carL complex. Results of the experiments show a pattern of modulation depth?phase trade?off over a range is constant above and much reduced below f carH=4 kHz. These findings portray time?based pitch extraction as being a process in which phase spectrum plays a role consistent with the one proposed by W. H. Huggins [ 582589 (1952)] in his theory. [Work supported by NIH and the VA Medical Research.

Pierre L. Divenyi; Steven Greenberg; Alain P. Algazi

1995-01-01T23:59:59.000Z

465

Assumptions to the Annual Energy Outlook 2001 - Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module The NEMS Commercial Sector Demand Module generates forecasts of commercial sector energy demand through 2020. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for

466

Assumptions to the Annual Energy Outlook - Transportation Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Transportation Demand Module Transportation Demand Module Assumption to the Annual Energy Outlook Transportation Demand Module The NEMS Transportation Demand Module estimates energy consumption across the nine Census Divisions (see Figure 5) and over ten fuel types. Each fuel type is modeled according to fuel-specific technology attributes applicable by transportation mode. Total transportation energy consumption is the sum of energy use in eight transport modes: light-duty vehicles (cars, light trucks, sport utility vehicles and vans), commercial light trucks (8,501-10,000 lbs gross vehicle weight), freight trucks (>10,000 lbs gross vehicle weight), freight and passenger airplanes, freight rail, freight shipping, and miscellaneous transport such as mass transit. Light-duty vehicle fuel consumption is further subdivided into personal usage and commercial fleet consumption.

467

Assumptions to the Annual Energy Outlook 2002 - Commercial Demand Module  

Gasoline and Diesel Fuel Update (EIA)

Commercial Demand Module Commercial Demand Module The NEMS Commercial Sector Demand Module generates forecasts of commercial sector energy demand through 2020. The definition of the commercial sector is consistent with EIA’s State Energy Data System (SEDS). That is, the commercial sector includes business establishments that are not engaged in transportation or in manufacturing or other types of industrial activity (e.g., agriculture, mining or construction). The bulk of commercial sector energy is consumed within buildings; however, street lights, pumps, bridges, and public services are also included if the establishment operating them is considered commercial. Since most of commercial energy consumption occurs in buildings, the commercial module relies on the data from the EIA Commercial Buildings Energy Consumption Survey (CBECS) for

468

AEOP2011:Electricity Generation Capacity by Electricity Market Module  

Open Energy Info (EERE)

AEOP2011:Electricity Generation Capacity by Electricity Market Module AEOP2011:Electricity Generation Capacity by Electricity Market Module Region and Source Dataset Summary Description This dataset comes from the Energy Information Administration (EIA), and is part of the 2011 Annual Energy Outlook Report (AEO2011). This dataset is table 97, and contains only the reference case. The dataset uses billion kilowatthours. The data is broken down into Texas regional entity, Florida reliability coordinating council, Midwest reliability council and Northeast power coordination council. Source EIA Date Released April 26th, 2011 (3 years ago) Date Updated Unknown Keywords AEO Electricity electricity market module region generation capacity Data application/vnd.ms-excel icon AEO2011: Electricity Generation Capacity by Electricity Market Module Region and Source- Reference Case (xls, 10.6 KiB)

469

Assumptions to the Annual Energy Outlook 2001 - Coal Market Module  

Gasoline and Diesel Fuel Update (EIA)

Coal Market Module Coal Market Module The NEMS Coal Market Module (CMM) provides forecasts of U.S. coal production, consumption, exports, distribution, and prices. The CMM comprises three functional areas: coal production, coal distribution, and coal exports. A detailed description of the CMM is provided in the EIA publication, Coal Market Module of the National Energy Modeling System 2001, DOE/EIA-M060(2001) January 2001. Key Assumptions Coal Production The coal production submodule of the CMM generates a different set of supply curves for the CMM for each year of the forecast. Separate supply curves are developed for each of 11 supply regions, and 12 coal types (unique combinations of thermal grade, sulfur content, and mine type). The modeling approach used to construct regional coal supply curves

470

Assumptions to the Annual Energy Outlook 2002 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).117 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration,

471

Assumptions to the Annual Energy Outlook 2001 - Renewable Fuels Module  

Gasoline and Diesel Fuel Update (EIA)

Renewable Fuels Module Renewable Fuels Module The NEMS Renewable Fuels Module (RFM) provides natural resources supply and technology input information for forecasts of new central-station U.S. electricity generating capacity using renewable energy resources. The RFM has five submodules representing various renewable energy sources, biomass, geothermal, landfill gas, solar, and wind; a sixth renewable, conventional hydroelectric power, is represented in the Electricity Market Module (EMM).112 Some renewables, such as landfill gas (LFG) from municipal solid waste (MSW) and other biomass materials, are fuels in the conventional sense of the word, while others, such as wind and solar radiation, are energy sources that do not involve the production or consumption of a fuel. Renewable technologies cover the gamut of commercial market penetration,

472

Order Module--RADIATION PROTECTION PROGRAMS GUIDE | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

RADIATION PROTECTION PROGRAMS GUIDE RADIATION PROTECTION PROGRAMS GUIDE Order Module--RADIATION PROTECTION PROGRAMS GUIDE The familiar level of this module is designed to provide the basic information related to DOE G 441.1-1C, Radiation Protection Programs Guide, as required in DOE-STD-1174-2003, Radiation Protection Functional Area Qualification Standard, December 2003. Completion of this module also meets certain requirements associated with the DOE Facility Representative Program and the DOE Intern Program. The information contained in this module addresses specific requirements and as such does not include the entire text of the source document. Before continuing, you should obtain a copy of the Order. Copies of the DOE Directives are available at http://www.directives.doe.gov/ or through the course manager. In March

473

Assumptions to the Annual Energy Outlook 2000 - International Energy Module  

Gasoline and Diesel Fuel Update (EIA)

International Energy Module determines changes in the world oil price and the supply prices of crude oils and petroleum products for import to the United States in response to changes in U.S. import requirements. A market clearing method is used to determine the price at which worldwide demand for oil is equal to the worldwide supply. The module determines new values for oil production and demand for regions outside the United States, along with a new world oil price that balances supply and demand in the international oil market. A detailed description of the International Energy Module is provided in the EIA publication, Model Documentation Report: The International Energy Module of the National Energy Modeling System, DOE/EIA-M071(99), (Washington, DC, February 1999).

474

Subcritical modulational instability and transition to chaos from periodicity  

E-Print Network [OSTI]

This study shows that a modulationally destabilized monochromatic wave in a fluid system may undergo a subcritical bifurcation directly into chaos, when dissipation is weak enough. Analysis is made within the framework of the complex Ginzburg-Landau equations.

Hie-Tae Moon

2004-05-28T23:59:59.000Z

475

Yetter-Drinfeld modules for Hom-bialgebras  

SciTech Connect (OSTI)

The aim of this paper is to define and study Yetter-Drinfeld modules over Hom-bialgebras, a generalized version of bialgebras obtained by modifying the algebra and coalgebra structures by a homomorphism. Yetter-Drinfeld modules over a Hom-bialgebra with bijective structure map provide solutions of the Hom-Yang-Baxter equation. The category H/HYD of Yetter-Drinfeld modules with bijective structure maps over a Hom-bialgebra H with bijective structure map can be organized, in two different ways, as a quasi-braided pre-tensor category. If H is quasitriangular (respectively, coquasitriangular) the first (respectively, second) quasi-braided pre-tensor category H/HYD contains, as a quasi-braided pre-tensor subcategory, the category of modules (respectively, comodules) with bijective structure maps over H.

Makhlouf, Abdenacer, E-mail: Abdenacer.Makhlouf@uha.fr [Universit de Haute Alsace, Laboratoire de Mathmatiques, Informatique et Applications, 4, rue des frres Lumire, F-68093 Mulhouse (France)] [Universit de Haute Alsace, Laboratoire de Mathmatiques, Informatique et Applications, 4, rue des frres Lumire, F-68093 Mulhouse (France); Panaite, Florin, E-mail: Florin.Panaite@imar.ro [Institute of Mathematics of the Romanian Academy, PO-Box 1-764, RO-014700 Bucharest (Romania)] [Institute of Mathematics of the Romanian Academy, PO-Box 1-764, RO-014700 Bucharest (Romania)

2014-01-15T23:59:59.000Z

476

Artificial Neural Network Modeling of a Photovoltaic Module  

Science Journals Connector (OSTI)

This paper deals with the problem of designing an accurate and computationally fast model of a particular real photovoltaic module. There are a number of well known theoretical models, but they need the fine tuni...

Jose Manuel Lpez-Guede

2014-01-01T23:59:59.000Z

477

Terrestrial Photovoltaic Module Accelerated Test-To-Failure Protocol  

SciTech Connect (OSTI)

This technical report documents a test-to-failure protocol that may be used to obtain quantitative information about the reliability of photovoltaic modules using accelerated testing in environmental temperature-humidity chambers.

Osterwald, C. R.

2008-03-01T23:59:59.000Z

478

Automatic calibration of modulated fractional-N frequency synthesizers  

E-Print Network [OSTI]

The focus of this research has been the development of a low power, radio frequency transmitter architecture. Specifically, a technique for in service automatic calibration of a modulated phase locked loop (PLL) frequency ...

McMahill, Dan

2001-01-01T23:59:59.000Z

479

Agenda for the PV Module Reliability Workshop, February 26 -...  

Broader source: Energy.gov (indexed) [DOE]

"Preliminary Analysis of Modules Deployed at PV- USA for 18-24 Years" 13. D.C. Jordan and B. Sekulic of NREL, "Impact and Detection of Pyranometer Failure on PV...

480

Metallization by plating for high-performance multichip modules  

Science Journals Connector (OSTI)

Electrolytic plating is used to produce the interconnect wiring on the current generation of high-performance multichip modules used in IBM S/390 and AS/400 servers. This paper reviews the material and manufacturing ...

K. K. H. Wong; S. Kaja; P. W. DeHaven

1998-09-01T23:59:59.000Z

Note: This page contains sample records for the topic "underbody nominal module" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Do plants modulate biomass allocation in response to petroleum pollution?  

Science Journals Connector (OSTI)

...biology 1001 69 60 Do plants modulate biomass allocation in response to petroleum pollution...330031, People's Republic of China Biomass allocation is an important plant trait...study, we investigated the response of biomass allocation of Phragmites australis to...

2010-01-01T23:59:59.000Z

482

GIZ Sourcebook Module 4d: Natural Gas Vehicles | Open Energy...  

Open Energy Info (EERE)

d: Natural Gas Vehicles Jump to: navigation, search Tool Summary LAUNCH TOOL Name: GIZ Sourcebook Module 4d: Natural Gas Vehicles AgencyCompany Organization: GIZ ComplexityEase...

483

Stinespring's theorem for maps on Hilbert C*-modules  

E-Print Network [OSTI]

We strengthen Mohammad B. Asadi's analogue of Stinespring's theorem for certain maps on Hilbert C*-modules. We also show that any two minimal Stinespring representations are unitarily equivalent. We illustrate the main theorem with an example.

Bhat, B V Rajarama; Sumesh, K

2010-01-01T23:59:59.000Z

484

Economical Patterning of Series Connected a-Silicon Modules  

Science Journals Connector (OSTI)

Different patterning methods are used for manufacturing series connected stripe like cells in a-Si modules whith thin film technologie. These line patterns cause a loss of active cell area, defined by the edge...

W. Juergens; R. Plttner; H. Kausche

1987-01-01T23:59:59.000Z

485

Evaluation of CF4 plasma chemistry by power modulation  

Science Journals Connector (OSTI)

The dominant chemical reaction kinetics occurring in the plasma environment are studied by small periodic power modulation and analyzed using transfer functions. A CF4/Ar rf plasma at 500 mTorr was chosen to vali...

L. D. B. Kiss; H. H. Sawin

1992-12-01T23:59:59.000Z

486

Sandia National Laboratories: Module-level power electronics  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Module-level power electronics Sandia R&D Funded under New DOE SunShot Program On November 27, 2013, in Energy, News, News & Events, Partnership, Photovoltaic, Renewable Energy,...

487

Bound States and Scattering Resonances Induced by Spatially Modulated Interactions  

Science Journals Connector (OSTI)

We study the two-body problem with a spatially modulated interaction potential using a two-channel model, in which the interchannel coupling is provided by an optical standing wave and its strength modulates periodically in space. As the modulation amplitudes increase, there will appear a sequence of bound states. Part of them will cause a divergence of the effective scattering length, defined through the phase shift in the asymptotic behavior of scattering states. We also discuss how the local scattering length, defined through short-range behavior of scattering states, modulates spatially in different regimes. These results provide a theoretical guideline for a new control technique in the cold atom toolbox, in particular, for alkaline-earth(-like) atoms where the inelastic loss is small.

Ran Qi and Hui Zhai

2011-04-20T23:59:59.000Z

488

Information processing systems, reasoning modules, and reasoning system design methods  

DOE Patents [OSTI]

Information processing systems, reasoning modules, and reasoning system design methods are described. According to one aspect, an information processing system includes working memory comprising a semantic graph which comprises a plurality of abstractions, wherein the abstractions individually include an individual which is defined according to an ontology and a reasoning system comprising a plurality of reasoning modules which are configured to process different abstractions of the semantic graph, wherein a first of the reasoning modules is configured to process a plurality of abstractions which include individuals of a first classification type of the ontology and a second of the reasoning modules is configured to process a plurality of abstractions which include individuals of a second classification type of the ontology, wherein the first and second classification types are different.

Hohimer, Ryan E; Greitzer, Frank L; Hampton, Shawn D

2014-03-04T23:59:59.000Z

489

Measurements and Characterization: Cell and Module Performance (Fact Sheet)  

SciTech Connect (OSTI)

Capabilities fact sheet for the National Center for Photovoltaics: Measurements and Characterization -- Cell and Module Performance. One-sided sheet that includes Scope, Core Competencies and Capabilities, and Contact/Web information.

Not Available

2011-02-01T23:59:59.000Z

490

Boot System Services Interface (SSI) Modules for LAM/MPI  

E-Print Network [OSTI]

Boot System Services Interface (SSI) Modules for LAM/MPI API Version 1.0.0 / SSI Version 1 Protocols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 Booting Algorithms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2 Services Provided by the boot SSI 7 2.1 Header Files

Lumsdaine, Andrew

491

Order Module--self-study program: HAZARDOUS WASTE OPERATIONS...  

Energy Savers [EERE]

also help prepare you for the practice at the end of this module and for the criterion test. Before continuing, you should obtain a copy of the regulation at Hazardous waste...

492

Cell-type specific cholinergic modulation of the cortex  

E-Print Network [OSTI]

The cholinergic innervation of the neocortex by afferent fibers originating in the nucleus basalis (NB) of the basal forebrain is implicated in modulating diverse neocortical functions including information processing, ...

Chen, Naiyan

2013-01-01T23:59:59.000Z

493

Ultrasound-modulated optical tomography for biomedical applications  

E-Print Network [OSTI]

three signal-detection schemes for extracting the intensity of the ultrasound-modulated light, carried out experiments to image thick biological-tissue samples, and studied two techniques providing resolution in the cross-sections containing...

Li, Jun

2004-11-15T23:59:59.000Z

494

Modulation and Measurement of Time-Energy Entangled Photons  

E-Print Network [OSTI]

We describe a proof-of-principal experiment demonstrating a Fourier technique for measuring the shape of biphoton wavepackets. The technique is based on the use of synchronously driven fast modulators and slow (integrating) detectors.

Chinmay Belthangady; Shengwang Du; Chih-Sung Chuu; G. Y. Yin; S. E. Harris

2009-06-18T23:59:59.000Z

495

Nuclear Receptors as Modulators of the Tumor Microenvironment  

Science Journals Connector (OSTI)

...Health and Medical Research Council of Australia...Translational Cancer Research Grant, a Program of the Entertainment...ligand-activated nuclear receptors in the...103:689-93. Nuclear receptors as modulators...decades of cancer research, the inherent...

Mara H. Sherman; Michael Downes; and Ronald M. Evans

2012-01-01T23:59:59.000Z

496

INTEGRATED TANDEM ELECTROABSORPTION MODULATORS FOR HIGH-SPEED OTDM APPLICATIONS  

E-Print Network [OSTI]

ten periods of strain-compensated InGaAsP quantum wells on semi-insulated InP substrate [9]. The 20-µm into each modulator in order to reduce capacitance and microwave crosstalk; however, the absorption region

Bowers, John

497

Testing and modeling of photo-electric modulators  

E-Print Network [OSTI]

Optical links are a promising alternative to the electrical interconnects that are currently used between chips within a computer. A crucial part of an optical link is a modulator, a device that converts an electrical ...

Weaver, Matthew J. (Matthew James)

2012-01-01T23:59:59.000Z

498

Radar Testbed Characterization for Evaluation of Modulated Scatterer Concepts  

E-Print Network [OSTI]

The following research explores the concepts of communication-embedded radar with an emphasis on radar operation and modulated scatterer concepts. Once firmly established the concept of communication via radar backscatter ...

Casper, Matt

2010-05-27T23:59:59.000Z

499

Nano photonic and ultra fast all-optical processing modules  

Science Journals Connector (OSTI)

In this paper we present an all-optical approach allowing the realization of logic gates and other building blocks of a processing unit. The modules have dimensions of only few...

Zalevsky, Zeev; Rudnitsky, Arkady; Nathan, Menachem

2005-01-01T23:59:59.000Z

500

Module name: Advanced topic: Visual Computing Abbreviation: SVC  

E-Print Network [OSTI]

visualization (registration and segmentation of computer tomography measurement data), digital image generationModule name: Advanced topic: Visual Computing Abbreviation: SVC Study semester: 3rd semester (WS Recommended prerequisites: Geometric Modeling, Interactive Computer Graphics Learning goals: Technological

Ahlers, Volker - Fakultät IV