National Library of Energy BETA

Sample records for uc davis cu

  1. UC Davis Energy Efficiency Center EEC | Open Energy Information

    Open Energy Info (EERE)

    UC Davis Energy Efficiency Center EEC Jump to: navigation, search Name: UC Davis Energy Efficiency Center (EEC) Place: California Sector: Efficiency Product: With a leadership...

  2. Evolution of spatial resolution in breast CT at UC Davis

    SciTech Connect (OSTI)

    Gazi, Peymon M.; Yang, Kai; Burkett, George W.; Aminololama-Shakeri, Shadi; Anthony Seibert, J.; Boone, John M.

    2015-04-15

    Purpose: Dedicated breast computed tomography (bCT) technology for the purpose of breast cancer screening has been a focus of research at UC Davis since the late 1990s. Previous studies have shown that improvement in spatial resolution characteristics of this modality correlates with greater microcalcification detection, a factor considered a potential limitation of bCT. The aim of this study is to improve spatial resolution as characterized by the modulation transfer function (MTF) via changes in the scanner hardware components and operational schema. Methods: Four prototypes of pendant-geometry, cone-beam breast CT scanners were designed and developed spanning three generations of design evolution. To improve the system MTF in each bCT generation, modifications were made to the imaging components (x-ray tube and flat-panel detector), system geometry (source-to-isocenter and detector distance), and image acquisition parameters (technique factors, number of projections, system synchronization scheme, and gantry rotational speed). Results: Characterization of different generations of bCT systems shows these modifications resulted in a 188% improvement of the limiting MTF properties from the first to second generation and an additional 110% from the second to third. The intrinsic resolution degradation in the azimuthal direction observed in the first generation was corrected by changing the acquisition from continuous to pulsed x-ray acquisition. Utilizing a high resolution detector in the third generation, along with modifications made in system geometry and scan protocol, resulted in a 125% improvement in limiting resolution. An additional 39% improvement was obtained by changing the detector binning mode from 2 × 2 to 1 × 1. Conclusions: These results underscore the advancement in spatial resolution characteristics of breast CT technology. The combined use of a pulsed x-ray system, higher resolution flat-panel detector and changing the scanner geometry and image

  3. UC Davis Models: Geospatial Station Network Design Tool and Hydrogen Infrastructure Rollout Economic Analysis Model

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    UC Davis Models Geospatial Station Network Design Tool & Hydrogen Infrastructure Rollout Economic Analysis Model (University of California-Davis) Objectives Analyze regional strategies for early rollout of hydrogen infrastructure in support of fuel cell vehicle commercialization. Estimate how many hydrogen fueling stations would be needed and how much it will cost to develop cost competitive hydrogen supply. Compare the cost of hydrogen from different types and sizes of hydrogen stations

  4. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence

    SciTech Connect (OSTI)

    Erickson, Paul

    2012-05-31

    This is the final report of the UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence which spanned from 2005-2012. The U.S. Department of Energy (DOE) established the Graduate Automotive Technology Education (GATE) Program, to provide a new generation of engineers and scientists with knowledge and skills to create advanced automotive technologies. The UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence established in 2005 is focused on research, education, industrial collaboration and outreach within automotive technology. UC Davis has had two independent GATE centers with separate well-defined objectives and research programs from 1998. The Fuel Cell Center, administered by ITS-Davis, has focused on fuel cell technology. The Hybrid-Electric Vehicle Design Center (HEV Center), administered by the Department of Mechanical and Aeronautical Engineering, has focused on the development of plug-in hybrid technology using internal combustion engines. The merger of these two centers in 2005 has broadened the scope of research and lead to higher visibility of the activity. UC Davis's existing GATE centers have become the campus's research focal points on fuel cells and hybrid-electric vehicles, and the home for graduate students who are studying advanced automotive technologies. The centers have been highly successful in attracting, training, and placing top-notch students into fuel cell and hybrid programs in both industry and government.

  5. 2012 CERTS LAAR Program Peer Review - Integration and Extension of Direct Load Management of Smart Loads - Anna Scaglioni, UC Davis

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and Extension of Direct Load Management of Smart Loads Anna Scaglione, UC Davis GRA: Mahnoosh Alizadeh Project objective  Invent methods to "store" load demand for * Real-time "generation following" * Integration of load reserves as dispatchable assets in the Energy Market  Architecture for virtual "reserves" (queues) of electrical load demand * Watts to Job mapping (analysis)  Captures digitally the service requirements - Equal service type = Equal queue *

  6. Net-Zero Campus at University of California, Davis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Net-Zero Campus at University of California, Davis Net-Zero Campus at University of California, Davis Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Sunlight reflects off the metal window sun shields on the Ramble apartments at West Village at UC Davis in Davis, California. Photo by Greg Urquiaga /UC Davis, NREL 20240 The new Viridian apartments at West Village at UC Davis. The new Viridian apartments at West Village

  7. Thomas Davis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thomas Davis Thomas Davis tdavis.jpg Thomas (Tom) A. Davis Environmental Systems, CSE TADavis@lbl.gov Phone: (510) 486-4524 Fax: (510) 486-4316 1 Cyclotron Road Mail Stop 943-256 Berkeley, CA 94720 Last edited: 2016-04-29 11:34:58

  8. Genetic algorithms at UC Davis/LLNL

    SciTech Connect (OSTI)

    Vemuri, V.R.

    1993-12-31

    A tutorial introduction to genetic algorithms is given. This brief tutorial should serve the purpose of introducing the subject to the novice. The tutorial is followed by a brief commentary on the term project reports that follow.

  9. UC-2030

    Office of Scientific and Technical Information (OSTI)

    678 Rev. 1 UC-2030 8 I I 1 8 8 I Nuclear Magnetic Resonance Measurement of Ammonia ... Summary The diffusion of ammonium ions in aqueous solutions was measured by nuclear ...

  10. Alternative Fuels Data Center: UC Davis Pioneers Research for...

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    ... Electric Ice Resurfacers Improve Air Quality in Minnesota Sept. 14, 2013 Photo ... Fuels Dec. 25, 2010 Tennessee Reduces Pollution With Propane Hybrid Trolleys Dec. 11, ...

  11. Davis-Bacon Act Compliance Video

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Davis-Bacon Act Compliance Video

  12. University of California Davis West Village: The Largest Planned Net Zero Energy Community in the United States

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Community Renewable Energy (CommRE) success stories UC Davis net zero energy community; energy efficiency in buildings; PV and photovoltaics.

  13. Gary Davis | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Davis About Us Gary Davis - President & CEO - National Center for American Indian Enterprise Development (NCAIED) Gary Davis Gary "Litefoot" Davis is an enrolled member of the Cherokee Nation of Oklahoma. Before being appointed as President and CEO of the NCAIED, Mr. Davis served on the Board of Directors. He served as VP of Native Affairs for the Triple Five Group and he previously served as co-chair of the National Indian Gaming Association's, American Indian Business Network.

  14. Theresa Davis | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In her office, Davis reviews Argonne's Annual Site Environmental Report, which she co-authors. In her office, Davis reviews Argonne's Annual Site Environmental Report, which she co-authors. Davis, center, conducts an environmental compliance walkthrough in one of the Argonne laboratories with Kevin Crosson, left, of the Facilities Management and Services Division and Kaushik Joshi of the U.S. Department of Energy's Argonne Site Office. Davis, center, conducts an environmental compliance

  15. davis-99.PDF

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Anomalous/Lévy Photon Diffusion Theory: Toward a New Parameterization of Shortwave Transport in Cloudy Columns A. B. Davis Los Alamos National Laboratory Space and Remote Sensing Sciences Group Los Alamos, New Mexico A. Marshak National Aeronautics and Space Administration Goddard Space Flight Center Climate and Radiation Branch Greenbelt, Maryland K. P. Pfeilsticker University of Heidelberg Institute for Environmental Physics Heidelberg, Germany Introduction Optically speaking, the earth's

  16. Peter Hosemann: UC-Berkeley

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Peter Hosemann: UC-Berkeley Alumni Link: Opportunities, News and Resources for Former Employees Latest Issue:September 2015 all issues All Issues » submit Peter Hosemann: UC-Berkeley Exploring materials in harsh environments November 1, 2014 Peter Hosemann Peter Hosemann Contact Linda Anderman Email Peter Hosemann Peter Hosemann now at UC-Berkeley While Peter Hosemann was already interested in materials science when he began at the Lab as a summer student in 2003, it was during his time here in

  17. Mark F. Davis | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Mark D. Mitchell About Us Mark D. Mitchell - Communications Support Contractor to ARPA-E Mark Mitchell is a Communications Support Contractor to ARPA-E. Most Recent ARPA-E Celebrates Five Years of Changing What's Possible April 28 Energy Innovators to Convene for 2014 ARPA-E Summit February 20 Interview with ARPA-E: The Future of Semiconductors February 4

    F. Davis Mark F. Davis Director, Biosciences Center Mark.Davis@nrel.gov | 303-384-6140 Research Interests Dr. Mark Davis is the Director

  18. DAVI America | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search Name: DAVI America Address: 90 Fern Hill Dr. Place: Granville, Ohio Zip: 43023 Sector: Wind energy Product: Metal Fabrication Machinery Phone...

  19. UC Berkeley- Energy Institute | Open Energy Information

    Open Energy Info (EERE)

    Berkeley- Energy Institute Jump to: navigation, search Logo: UC Berkeley- Energy Institute Name: UC Berkeley- Energy Institute Address: 2547 Channing Way Place: Berkeley,...

  20. Davis Graham Stubbs LLP | Open Energy Information

    Open Energy Info (EERE)

    Graham Stubbs LLP Jump to: navigation, search Name: Davis Graham & Stubbs LLP Place: Denver, Colorado Zip: 80202 Sector: Services Product: String representation "Davis Graham & ......

  1. Davis Bacon Frequently Asked Questions (FAQs) | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Davis Bacon Frequently Asked Questions (FAQs) Davis Bacon Frequently Asked Questions (FAQs) PDF icon DBA FAQs More Documents & Publications Davis-Bacon Act - Under the American...

  2. DL-36361 UC-414 I

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    DL-36361 UC-414 I * Discovery of the Most Distant Supernovae and the Quest for L l Gerson Goldhaber and Saul Perlmutter Lawrence Berkeley Laboratory and Center for Particle Astrophysics University of California, Berkeley, CA 94720 Silvia Gabi, Ariel Goobar, Alex Kim, Mathew Kim, and Reynald Pain Lawrence Berkeley Laboratory, University of California Berkeley, CA 94720 Carl Pennypacker and Ivan Small Lawrence Berkeley Laboratory and Space Sciences Laboratory University of California, Berkeley, CA

  3. QER- Comment of Brenda Davies

    Broader source: Energy.gov [DOE]

    To Whom it May Concern, we are seeking fix-it-first, reduce demand, and clean energy future is the kind of energy infrastructure Massachusetts wants and needs. Not fracking, we won't allow it! -- Brenda K Davies, OTR/L Outdoor Access Providing recreation for all! YES WE CAN!!

  4. Davis Bacon Frequently Asked Questions (FAQs)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... A: Payment of wages every two weeks is a violation of the Davis-Bacon Act. Employees cannot waive the weekly pay requirement. The Davis-Bacon Act requires payment to employees "no ...

  5. Sandia Energy - Sandia-UC Davis Collaboration Funded by DOE Office...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by DOE Office of Fusion Energy The International Tokamak Engineering Reactor (ITER) is an international nuclear fusion research and engineering project, which is currently building...

  6. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE...

    Broader source: Energy.gov (indexed) [DOE]

    09 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. ti02erickson.pdf (788.94

  7. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE...

    Broader source: Energy.gov (indexed) [DOE]

    11 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program Annual Merit Review and Peer Evaluation ti007erickson2011o.pdf (383.09

  8. U.C. Davis high energy particle physics research: Technical progress report -- 1990

    SciTech Connect (OSTI)

    NONE

    1990-12-31

    Summaries of progress made for this period is given for each of the following areas: (1) Task A--Experiment, H1 detector at DESY; (2) Task C--Experiment, AMY detector at KEK; (3) Task D--Experiment, fixed target detectors at Fermilab; (4) Task F--Experiment, PEP detector at SLAC and pixel detector; (5) Task B--Theory, particle physics; and (6) Task E--Theory, particle physics.

  9. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of

    Broader source: Energy.gov (indexed) [DOE]

    1 I. BACKGROUND Exports of electricity from the United States to a foreign country are regulated and require authorization under section 202(e) of the Federal Power Act (FPA) (16 U.S.C. §824a(e)). On April 11, 2002, the Office of Fossil Energy (FE) of the Department of Energy (DOE) received an application from UBS AG, London Branch (UBS) for authorization to transmit electric energy from the United States to Mexico. UBS, a Swiss corporation formed in 1998 by the merger of Union Bank of

  10. UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of

    Broader source: Energy.gov (indexed) [DOE]

    Excellence | Department of Energy 09 DOE Hydrogen Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting, May 18-22, 2009 -- Washington D.C. ti_02_erickson.pdf (788.94

  11. TID-4500, UC-4 C

    Office of Legacy Management (LM)

    TID-4500, UC-4 C h e m i s t r y UCRL-51153 GAS ANALYSIS RESULTS FOR PROJECT RUL ISON PRODUCTION TESTING SAMPLES C. F. Smith, Jr. MS. date: N o v e m b e r 29, 1971 Contents Abstract Introduction Production Testing Operations Gas Sampling . Analytical Results . Chemical Composition . Radiochemical Analysis . Specific Activity Stable Gas Concentration Changes The Carbon Dioxide Anomaly Totals of Gaseous Species A4ck.nowledgments References GAS ANALYSIS R E S U L T S FOR PROJECT RULISON P R O D U

  12. Ohio Nuclear Profile - Davis Besse

    U.S. Energy Information Administration (EIA) Indexed Site

    Davis Besse" "Unit","Summer Capacity (MW)","Net Generation (Thousand MWh)","Summer Capacity Factor (Percent)","Type","Commercial Operation Date","License Expiration Date" 1,894,"7,610",97.2,"PWR","application/vnd.ms-excel","application/vnd.ms-excel" ,894,"7,610",97.2

  13. University of California Davis | Open Energy Information

    Open Energy Info (EERE)

    65714,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":"" Hide Map References: University of California, Davis1 This article is a stub. You can help...

  14. Davis, California: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Products Advanced Energy Products Corp AEP Blue Oak Energy Davis Energy Group Geothermal Resources Council Octus Energy Inc Sierra Energy Corporation University of California...

  15. TAP Webinar: Davis-Bacon Act Compliance

    Broader source: Energy.gov [DOE]

    This webinar, held on Nov. 18, 2014, offered information for Energy Department grantees, sub-grantees, and their contractors on complying with Davis-Bacon Act requirements.

  16. Environmental Survey preliminary report, Laboratory for Energy-Related Health Research, Davis, California

    SciTech Connect (OSTI)

    Not Available

    1988-03-01

    This report presents the preliminary findings from the first phase of the Survey of the United States Department of Energy (DOE) Laboratory for Energy-Related Health Research (LEHR) at the University of California, Davis (UC Davis), conducted November 16 through 20, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team components are being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with the LEHR. The Survey covers all environmental media and all areas of environmental regulation, and is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations at the LEHR and interviews with site personnel. The Survey team developed a Sampling and Analysis Plan to assist in further assessing certain of the environmental problems identified during its on-site activities. The Sampling and Analysis Plan will be executed by a DOE National Laboratory or a support contractor. When completed, the results will be incorporated into the Environmental Survey Interim Report for the LEHR at UC Davis. The Interim Report will reflect the final determinations of the LEHR Survey. 75 refs., 26 figs., 23 tabs.

  17. TID-4500, UC-4 Chemistry Lawpenoe R

    Office of Scientific and Technical Information (OSTI)

    TID-4500, UC-4 Chemistry Lawpenoe R a d i a f i o m L&bor&fox-y U N I V E R S I T Y O F C A L I F O R N I A L I V E R M O R E UC R L - 5 04 2 2 CI ADIABATIC EXPANSION OF HIGH ...

  18. lynn_davis.jpg | OSTI, US Dept of Energy Office of Scientific and Technical

    Office of Scientific and Technical Information (OSTI)

    Information lynn_davis

  19. Davis-Bacon Compliance and Performance | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Davis-Bacon Compliance and Performance Davis-Bacon Compliance and Performance PDF icon Davis-Bacon Compliance and Performance More Documents & Publications DOE Order 350.3 CHAPTER...

  20. UC Berkeley-Renewable and Appropriate Energy Laboratory | Open...

    Open Energy Info (EERE)

    Laboratory Jump to: navigation, search Logo: UC Berkeley-Renewable and Appropriate Energy Laboratory Name: UC Berkeley-Renewable and Appropriate Energy Laboratory Address: 2621...

  1. Brigadier General S.L. Davis | National Nuclear Security Administratio...

    National Nuclear Security Administration (NNSA)

    Administrator for Military Applications Brigadier General S.L. Davis Brigadier General S.L. Davis is the Principal Assistant Deputy Administrator for Military Applications at the ...

  2. Davie, Florida: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    by expanding it. Davie is a town in Broward County, Florida. It falls under Florida's 20th congressional district and Florida's 22nd congressional district and Florida's 23rd...

  3. Environmental assessment: Davis Canyon site, Utah

    SciTech Connect (OSTI)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high- level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of the five sites suitable for characterization.

  4. Environmental assessment: Davis Canyon site, Utah

    SciTech Connect (OSTI)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considering for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has found that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization.

  5. Environmental assessment: Davis Canyon site, Utah

    SciTech Connect (OSTI)

    none,

    1986-05-01

    In February 1983, the US Department of Energy (DOE) identified the Davis Canyon site in Utah as one of the nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. To determine their suitability, the Davis Canyon site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE's General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EA. The Davis Canyon site is in the Paradox Basin, which is one of five distinct geohydrologic settings considered for the first repository. This setting contains one other potentially acceptable site -- the Lavender Canyon site. Although the Lavender Canyon site is suitable for site characterization, the DOE has concluded that the Davis Canyon site is the preferred site in the Paradox Basin. On the basis of the evaluations reported in this EA, the DOE has found that the Davis Canyon site is not disqualified under the guidelines. Furthermore, the DOE has fond that the site is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Davis Canyon site as one of five sites suitable for characterization. 181 figs., 175 tabs.

  6. TAP Webinar: Davis-Bacon Act Compliance

    Broader source: Energy.gov [DOE]

    This TAP webinar held on Nov. 18, 2014 from 1:00 p.m. - 3:00 p.m. Eastern Standard Time. It will offer information for Energy Department grantees, sub-grantees, and their contractors on complying with Davis-Bacon Act requirements.

  7. Davis PV plant operation and maintenance manual

    SciTech Connect (OSTI)

    1994-09-01

    This operation and maintenance manual contains the information necessary to run the Photovoltaics for Utility Scale Applications (PVUSA) test facility in Davis, California. References to more specific information available in drawings, data sheets, files, or vendor manuals are included. The PVUSA is a national cooperative research and demonstration program formed in 1987 to assess the potential of utility scale photovoltaic systems.

  8. UCRL-17795 Addendum UC-34 Physics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Addendum UC-34 Physics TID-4500 (51st Ed. ) UNIVERSITY OF CALIFORNIA Lawrence Radiation Laboratory Berkeley, California AEC Contract No. W-7405-eng-48 SOME THOUGHTS ON STABILITY IN NONLINEAR PERIODIC FOCUSING SYSTEMS Edwin M. McMillan March 29, 1968 Printed in the United States of America Available from Clearinghouse for Federal Scientific and Technical Information National Bureau of Standards, U. S. Department of Commerce Springfield, Virginia 22151 Price: Printed Copy $3.00; Microfiche $0.65

  9. Presenter Bio - Tasios Melis, Professor, UC Berkeley

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Presenter Bio - Tasios Melis, Professor, UC Berkeley A Professor at the University of California Berkeley, Tasios Melis envisioned and pioneered the concept of "Photosynthetic Biofuels", entailing the direct application of photosynthesis for the generation of bioenergy, in a process where a single organism acts both as photocatalyst and processor, synthesizing and secreting ready to use fuels. This has been successfully applied to hydrogen production and specific hydrocarbon products.

  10. SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Please submit the Semi-Annual Davis-Bacon Enforcement Report in the Performance and Accountability for Grants in Energy (PAGE) system. If ...

  11. Raymond Davis Jr., Solar Neutrinos, and the Solar Neutrino Problems

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Raymond Davis, Jr., Solar Neutrinos, and the Solar Neutrino Problem Resources with Additional Information Raymond Davis, Jr. Photo Courtesy of Brookhaven National Laboratory (BNL) Raymond Davis, Jr., who conducted research in the Chemistry Department at Brookhaven National Laboratory (BNL) from 1948 through 1984, was awarded the 2002 Nobel Prize in Physics "for pioneering contributions to astrophysics, in particular for the detection of cosmic neutrinos." Dr. Davis is also a recipient

  12. Davis-Bacon Compliance and Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROCUREMENT ATTORNEYS CONFERENCE - Contractor Workforce Issues Jean Seibert Stucky Assistant General Counsel February 22, 2011 GC-63 1. Labor issues (unions) 2. Employment issues (equal employment; workforce restructuring) 3. Pensions and other benefits 4. Labor standards (e.g., Davis-Bacon Act) 2 Why is this important? 60-95% of DOE Contract costs are contractor human resource costs - 3 Roles and Responsibilities  DOE is not  The Employer of the contractor work force, or  The sponsor

  13. Microsoft Word - DOE-ID-12-043 UC-Davis EC B3-6[1].doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 SECTION A. Project Title: Study of intermetallic nanostructures for light-water reactor materials - Regents of the University of California SECTION B. Project Description This project will investigate if intermetallic coherent particles can be used to remove the radiation damage from the matrix in material to create a radiation tolerant structural material. It is the aim of this proposal to perform systematic experimental and computational investigations to understand the role of the

  14. Cu

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cu rre n t Ge n e ratio n Lo w En e rg y Cro s s Se c tio n Me as u re m e n ts : Sc iBar an d Min iBo o NE MiniBooNE Beam ➢ 8 GeV protons on Be target ➢ <E ν > = 0.7 GeV ➢ Change horn polarity for ν, ν modes Detector ➢ 12 m diameter, 800 ton mineral oil (CH 2 ) tank ➢ 1280 inner PMTs, 240 veto PMTs ➢ Events produce prompt Cherenkov light and delayed, isotropic scintillation light ➢ A " subevent" is cluster of tank activity in time ν µ µ - e - e + π + µ + K2

  15. UC 9-8-307 - Antiquities Discovery Reporting Requirements | Open...

    Open Energy Info (EERE)

    UC 9-8-307 - Antiquities Discovery Reporting RequirementsLegal Abstract Sets forth reporting requirements for discovery of archaeological resources on nonfederal lands....

  16. Sandia Energy - Introduction of Prof. David Kelley and UC Merced...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to SSLS Home Solid-State Lighting Partnership News Energy Efficiency News & Events Introduction of Prof. David Kelley and UC Merced to SSLS Previous Next Introduction of Prof....

  17. UC Berkeley-Transportation Sustainability Research Center | Open...

    Open Energy Info (EERE)

    Sustainability Research Center Jump to: navigation, search Name: UC Berkeley-Transportation Sustainability Research Center Address: 2614 Dwight Way Place: Berkeley, California Zip:...

  18. UC Center for Information Technology Research in the Interest...

    Open Energy Info (EERE)

    Center for Information Technology Research in the Interest of Society (CITRIS) Place: Berkeley, California Zip: 94720 Region: Bay Area Website: www.citris-uc.org Coordinates:...

  19. Raymond Davis Jr., Solar Neutrinos, and the Solar Neutrino Problems

    Office of Scientific and Technical Information (OSTI)

    discrepancy. While at Brookhaven, Ray Davis conducted research and experiments in solar neutrinos at Homestake Gold Mine in South Dakota. This research was funded by the...

  20. Davie County, North Carolina: Energy Resources | Open Energy...

    Open Energy Info (EERE)

    Zone Number 4 Climate Zone Subtype A. Places in Davie County, North Carolina Bermuda Run, North Carolina Cooleemee, North Carolina Mocksville, North Carolina Retrieved from...

  1. The Facts On Electric Vehicles: Interview with Pat Davis | Department...

    Office of Environmental Management (EM)

    ... Q: What's the general price range for home charging stations? Does it vary by market and availability? Pat Davis: It varies a lot, unfortunately. The charging equipment itself, ...

  2. Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form...

  3. SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Semi-Annual Davis-Bacon Enforcement Report. Please submit the Semi-Annual Davis-Bacon Enforcement Report in the Performance and Accountability for Grants in Energy (PAGE) system. Enforcement Report (151.16 KB) More Documents & Publications SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Draft Sample Collection Instrument Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance

  4. UC 9-8-304 - Antiquities | Open Energy Information

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-8-304 - AntiquitiesLegal Abstract Provides for protecting antiquities discovered on...

  5. UC 54-2 - Definitions | Open Energy Information

    Open Energy Info (EERE)

    2 - Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 54-2 - DefinitionsLegal Abstract This section provides...

  6. Light atom quantum oscillations in UC and US

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yiu, Yuen; Aczel, Adam A.; Granroth, Garrett E.; Abernathy, Douglas L.; Stone, Matthew B.; Buyers, W. J. L.; Lin, J. Y. Y.; Samolyuk, German D.; Stocks, George Malcolm; Nagler, Stephen E.

    2016-01-01

    High energy vibrational scattering in the binary systems UC and US is measured using time-of-flight inelastic neutron scattering. A clear set of well-defined peaks equally separated in energy is observed in UC, corresponding to harmonic oscillations of the light C atoms in a cage of heavy U atoms. The scattering is much weaker in US and only a few oscillator peaks are visible. We show how the difference between the materials can be understood by considering the neutron scattering lengths and masses of the lighter atoms. Monte Carlo ray tracing is used to simulate the scattering, with near quantitative agreementmore » with the data in UC, and some differences with US. The possibility of observing anharmonicity and anisotropy in the potentials of the light atoms is investigated in UC. Lastly, the observed data is well accounted for by considering each light atom as a single atom isotropic quantum harmonic oscillator.« less

  7. Light atom quantum oscillations in UC and US

    SciTech Connect (OSTI)

    Yiu, Yuen; Aczel, Adam A.; Granroth, Garrett E.; Abernathy, Douglas L.; Stone, Matthew B.; Buyers, W. J. L.; Lin, J. Y. Y.; Samolyuk, German D.; Stocks, George Malcolm; Nagler, Stephen E.

    2016-01-01

    High energy vibrational scattering in the binary systems UC and US is measured using time-of-flight inelastic neutron scattering. A clear set of well-defined peaks equally separated in energy is observed in UC, corresponding to harmonic oscillations of the light C atoms in a cage of heavy U atoms. The scattering is much weaker in US and only a few oscillator peaks are visible. We show how the difference between the materials can be understood by considering the neutron scattering lengths and masses of the lighter atoms. Monte Carlo ray tracing is used to simulate the scattering, with near quantitative agreement with the data in UC, and some differences with US. The possibility of observing anharmonicity and anisotropy in the potentials of the light atoms is investigated in UC. Lastly, the observed data is well accounted for by considering each light atom as a single atom isotropic quantum harmonic oscillator.

  8. UC 63G-4 - Administrative Procedures Act | Open Energy Information

    Open Energy Info (EERE)

    63G-4 - Administrative Procedures Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 63G-4 - Administrative Procedures...

  9. UC 73-3 - Water Appropriation | Open Energy Information

    Open Energy Info (EERE)

    3 - Water Appropriation Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 73-3 - Water AppropriationLegal Abstract Governs water...

  10. UC 9-8-309 - Human Remains | Open Energy Information

    Open Energy Info (EERE)

    9 - Human Remains Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-8-309 - Human RemainsLegal Abstract Governs discovery of...

  11. UC Berkeley Captures Energy Savings by Empowering Building Operators |

    Energy Savers [EERE]

    Department of Energy UC Berkeley Captures Energy Savings by Empowering Building Operators UC Berkeley Captures Energy Savings by Empowering Building Operators August 12, 2016 - 10:16am Addthis Jason Hartke Commercial Buildings Integration Program Manager bto_UCBerkeleyProfile_081216.jpg University campuses are a treasure trove of energy efficiency opportunities, as their facilities teams will tell you. The challenge is not in identifying opportunities for savings, but in finding the time to

  12. SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Please submit the Semi-Annual Davis-Bacon Enforcement Report in the Performance and Accountability for Grants in Energy (PAGE) system. If you do not have access to the PAGE system, please submit this form to DBAEnforcementReports@hq.doe.gov. The following questions regarding enforcement activity (Davis-Bacon and Related Acts) by this Agency are required by 29 CFR, Part 5.7(b), and Department of Labor, All Agency Memorandum #189. Please refer to the

  13. VBH-0083- In the Matter of S.R. Davis

    Broader source: Energy.gov [DOE]

    S.R. Davis (the Employee) filed a complaint against her former employer, Fluor Fernald, Inc. (the Contractor) under the Department of Energy (DOE) Contractor Employee Protection Program, 10 C.F.R....

  14. SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT

    Broader source: Energy.gov [DOE]

    Please submit the Semi-Annual Davis-Bacon Enforcement Report in the Performance and Accountability for Grants in Energy (PAGE) system. If you do not have access to the PAGE system, please submit...

  15. Davis-Bacon Act - Under the American Recovery and Reinvestment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Best Practices * Post the Davis-Bacon wage determination poster at work- site * Know the prevailing wage rates and benefits are in your area geography. Check with the Wage and ...

  16. Raymond Davis Jr., Solar Neutrinos, and the Solar Neutrino Problems

    Office of Scientific and Technical Information (OSTI)

    Davis is also a recipient of the 2003 Fermi Award. He was the first scientist to detect solar neutrinos, ghostlike particles produced in the nuclear reactions that power the sun. ...

  17. VBA-0083- In the Matter of S.R. Davis

    Broader source: Energy.gov [DOE]

    This Decision considers an Appeal of an Initial Agency Decision (IAD) issued on April 21, 2004, involving a complaint filed by S.R. Davis (also referred to as the Complainant) under the Department...

  18. Davis-Bacon Act - Under the American Recovery and Reinvestment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    American Recovery and Reinvestment Act of 2009 (ARRA) Davis-Bacon Act presentation by Jay Nathwani at the 2012 Peer Review Meeting PDF icon gtp2012peerreviewdbanathwani.pdf...

  19. VBU-0083- In the Matter of S. R. Davis

    Broader source: Energy.gov [DOE]

    S. R. Davis, a former employee of Fluor Fernald, Inc. (Fluor), a Department of Energy (DOE) contractor, appeals the DOE Ohio Field Office’s (OFO) dismissal of the whistleblower complaint against...

  20. General Davis kicks the tires on a Safeguards Transporter | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) General Davis kicks the tires on a Safeguards Transporter Tuesday, October 6, 2015 - 8:43am NNSA Blog Brigadier General Stephen L. Davis, NNSA's Acting Deputy Administrator for Defense Programs, gets a lesson on how to drive a Safeguards Transporter during a recent visit to the Office of Secure Transportation (OST) headquarters in Albuquerque, New Mexico. OST is responsible for transporting nuclear weapons, components and special nuclear materials to

  1. CMI Education Partner: University of California, Davis | Critical Materials

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Institute University of California, Davis The University of California, Davis offers courses in several areas: Chemical and Materials Science Engineering Chemistry Geology http://catalog.ucdavis.edu/programs.html course list Chemical and Materials Science Engineering , Chemistry, Chemical Physics(website cannot be opened) Courses in Engineering: Chemical and Materials Science (ECM) Lower Division 51. Material Balances (4) Lecture-4 hours. Prerequisite: Mathematics 21D with C- or better, and

  2. Signature of Bret E Knapp Signature of Kimberly Davis-Lebak

    National Nuclear Security Administration (NNSA)

    Bret E Knapp Signature of Kimberly Davis-Lebak Signature of Homer Williamson

  3. Revised Interpretation of the Applicability of the Davis-Bacon Act |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Revised Interpretation of the Applicability of the Davis-Bacon Act Revised Interpretation of the Applicability of the Davis-Bacon Act Revised analysis of the applicability of the Davis-Bacon Act requirements to activities funding in whole or in part by the Smart Grid Investment Grant project under the American Recovery and Reinvestment Act. Revised Interpretation of the Applicability of the Davis-Bacon Act (66.92 KB) More Documents & Publications Davis Bacon Act

  4. Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    of Energy Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance Semi-Annual Davis-Bacon Act Enforcement Report Form Guidance, a letter to grantees from the U.S. Department of Energy's Better Buildings Neighborhood Program. Form Guidance (68 KB) More Documents & Publications SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT Draft Sample Collection Instrument

  5. A I'J' ANCR-1115 UC-78 I S

    Office of Scientific and Technical Information (OSTI)

    p A I'J' ANCR-1115 UC-78 I S . BOILING WATER REACTOR-FULL LENGTH EMERGENCI CORE COOLING ... i : v a t n l y omned riphf's. . Light- Water Reactor Technology TID-4500 I - N O T I C ...

  6. NREL Names Mark Davis to Lead Biosciences Center | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL Names Mark Davis to Lead Biosciences Center June 24, 2016 Dr. Mark Davis is the new director of the Biosciences Center at the Energy Department's National Renewable Energy Laboratory (NREL). "Mark has been serving in this capacity for almost a year, and we are very excited to now have him in this position formally," said Adam Bratis, NREL's associate lab director for BioEnergy Science and Technology. The Biosciences Center is under the umbrella of the BioEnergy Science and

  7. Utah - UC 54-14 - Utility Facility Review Board Act | Open Energy...

    Open Energy Info (EERE)

    Utah - UC 54-14 - Utility Facility Review Board Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Utah - UC 54-14 - Utility...

  8. Microsoft PowerPoint - 16.1225_Terry Cooke-Davies - Project Complexity...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    225Terry Cooke-Davies - Project Complexity as of 16 Mar Microsoft PowerPoint - 16.1225Terry Cooke-Davies - Project Complexity as of 16 Mar PDF icon Microsoft PowerPoint -...

  9. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY ...

  10. Davis v. Fuller, 12 Vt. 178, 198 (1840) | Open Energy Information

    Open Energy Info (EERE)

    v. Fuller, 12 Vt. 178, 198 (1840) Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal CaseHearing: Davis v. Fuller, 12 Vt. 178, 198 (1840)Legal Hearing Davis...

  11. A Desk Guide To The Davis-Bacon Act | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A Desk Guide To The Davis-Bacon Act A Desk Guide To The Davis-Bacon Act DOE DBA Desk Guide Rev 1 July 30 2012 (388.94 KB) More Documents & Publications Davis Bacon Frequently Asked Questions (FAQs) Labor Standards Training - Albuquerque Service Center 3-9-16 Labor Standards/Wage and Hour Laws

  12. OSTIblog Articles in the UC Berkeley Topic | OSTI, US Dept of Energy Office

    Office of Scientific and Technical Information (OSTI)

    of Scientific and Technical Information UC Berkeley Topic UC Berkeley in the Spotlight by Kathy Chambers 17 Sep, 2013 in Products and Content 9904 CampanileMtTamalpiasSunset_caption.jpg UC Berkeley in the Spotlight Read more about 9904 Overlooking the eastern shore of the beautiful San Francisco Bay is UC Berkeley, founded during the gold rush days as the flagship institution of the University of California. This campus has become one of the preeminent universities in the world. UC Berkeley

  13. Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    (ARRA) | Department of Energy Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009 (ARRA) Davis-Bacon Act - Under the American Recovery and Reinvestment Act of 2009 (ARRA) Davis-Bacon Act presentation by Jay Nathwani at the 2012 Peer Review Meeting gtp_2012peerreview_dba_nathwani.pdf (190.96 KB) More Documents & Publications DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE

  14. A DESK GUIDE TO THE DAVIS-BACON ACT

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE DBA Desk Guide - Rev. 1 July 30, 2012 A DESK GUIDE TO THE DAVIS-BACON ACT Prevailing Wage Requirements for Contractors on Federal Contracts and DBA-Covered Federally Financed or Assisted Construction Projects Introduction. The U. S. Department of Energy (DOE) has prepared this Desk Guide for the use of contractors and subcontractors performing work on construction projects under a federal contract, or under a statute authorizing federal financial assistance, that requires the application of

  15. ENERGY MEASUREMENTS EGG-10282-1063 UC-41

    Office of Legacy Management (LM)

    $ EGcG ENERGY MEASUREMENTS EGG-10282-1063 UC-41 OCTOBER 1984 ii 23 THE REMOTE SENSING 1 i13 LAGORATO OPERATED FORTHE U.S. DEPARTMENT OF ENERGY BY EG&G/EM AN AERIAL RADIOLOGICAL SURVEY FOR *41Am CONTAMINATION IN TONAWANDA, NEW YORK DATE OF SURVEY: MAY 1984 --- -I, .--_--...- &, EGcG ENERGY MEASUREMENTS EGG-10282-1063 OCTOBER 1984 AN AERIAL RADIOLOGICAL SURVEY FOR *41Am CONTAMINATION IN TONAWANDA, N E W YORK DATE OF SURVEY: M A Y 1984 H. W . Clark Project Scientist REVIEWED BY Nuclear

  16. DOE/EIA-0487(96) Distribution Category UC-950 Petroleum Marketing...

    U.S. Energy Information Administration (EIA) Indexed Site

    6) Distribution Category UC-950 Petroleum Marketing Annual 1996 October 1997 Energy Information Administration Office of Oil and Gas U.S. Department of Energy Washington, DC 20585...

  17. DOE/EIA-0487(95) Distribution Category UC-950 Petroleum Marketing...

    U.S. Energy Information Administration (EIA) Indexed Site

    5) Distribution Category UC-950 Petroleum Marketing Annual 1995 September 1995 Energy Information Administration Office of Oil and Gas U.S. Department of Energy Washington, DC...

  18. UC President Mark Yudof Announces Appointment of Paul Alivisatos as Berkeley Lab Director

    ScienceCinema (OSTI)

    Yudof, Mark

    2013-05-29

    In this video, broadcast to Berkeley Lab staff on Nov. 20, 2009, UC President Mark Yudof announces Paul Alivisatos as the new director of Lawrence Berkeley National Laboratory

  19. NREL Names Mark Davis to Lead Biosciences Center - News Releases | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Names Mark Davis to Lead Biosciences Center June 24, 2016 Photo of Mark Davis Mark Davis Dr. Mark Davis is the new director of the Biosciences Center at the Energy Department's National Renewable Energy Laboratory (NREL). "Mark has been serving in this capacity for almost a year, and we are very excited to now have him in this position formally," said Adam Bratis, NREL's associate lab director for BioEnergy Science and Technology. The Biosciences Center is under the umbrella of the

  20. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY...

    Energy Savers [EERE]

    BLOCK GRANT (EECBG) PROGRAM PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT (EECBG) ...

  1. SEMI-ANNUAL DAVIS-BACON ENFORCEMENT REPORT | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Please submit the Semi-Annual Davis-Bacon Enforcement Report in the Performance and Accountability for Grants in Energy (PAGE) system. PDF icon Enforcement Report More Documents & ...

  2. Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program...

    Broader source: Energy.gov (indexed) [DOE]

    DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANTS PROGRAM ...

  3. Tests with Sandia's Davis gun aid B61-12 life extension effort...

    National Nuclear Security Administration (NNSA)

    Tests with Sandia's Davis gun aid B61-12 life extension effort | National Nuclear Security Administration Facebook Twitter Youtube Flickr RSS People Mission Managing the Stockpile...

  4. UC-702 UC-702

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    General information provided for each test includes the date, time, location, type of test, sponsoring laboratory andor agency or other sponsor, depth of burial, purpose, yield or ...

  5. Text-Alternative Version of TAP Webinar: Davis-Bacon Act Compliance |

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Department of Energy Text-Alternative Version of TAP Webinar: Davis-Bacon Act Compliance Text-Alternative Version of TAP Webinar: Davis-Bacon Act Compliance Deborah Lastowka: For joining us for today's TAP webinar. Today we will be hearing from Eva Auman with the Office of the Assistant General Counsel for Labor and Pension Law on the topic of Davis Bacon Act compliance. Eva will go through her entire presentation, but as she's speaking, if you have any questions, you should feel free to

  6. UC 9-8-404 - Historic Preservation State Compliance | Open Energy...

    Open Energy Info (EERE)

    search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-8-404 - Historic Preservation State ComplianceLegal Abstract Delegates responsibility to...

  7. UC 54-4 - Authority of Commission Over Public Utilities | Open...

    Open Energy Info (EERE)

    4 - Authority of Commission Over Public Utilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 54-4 - Authority of...

  8. Utah UC 54-4, Authority of Commission Over Public Utilities ...

    Open Energy Info (EERE)

    4, Authority of Commission Over Public Utilities Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Utah UC 54-4, Authority of...

  9. Utah - UC 54-2 - Public Utilities Definitions | Open Energy Informatio...

    Open Energy Info (EERE)

    2 - Public Utilities Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: Utah - UC 54-2 - Public Utilities...

  10. Utah UC 54-2-1, Public Utilities Definitions | Open Energy Information

    Open Energy Info (EERE)

    2-1, Public Utilities Definitions Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: Utah UC 54-2-1, Public Utilities...

  11. UC 73-22 Utah Geothermal Resource Conservation Act | Open Energy...

    Open Energy Info (EERE)

    Utah Geothermal Resource Conservation Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- RegulationRegulation: UC 73-22 Utah Geothermal Resource...

  12. UC 73-22 - Utah Geothermal Resource Conservation Act | Open Energy...

    Open Energy Info (EERE)

    - Utah Geothermal Resource Conservation Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 73-22 - Utah Geothermal Resource...

  13. UC 19-6-401 et seq. - Utah Underground Storage Tank Act | Open...

    Open Energy Info (EERE)

    9-6-401 et seq. - Utah Underground Storage Tank Act Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 19-6-401 et seq. - Utah...

  14. OSTIblog Articles in the UC Berkeley Topic | OSTI, US Dept of...

    Office of Scientific and Technical Information (OSTI)

    Overlooking the eastern shore of the beautiful San Francisco Bay is UC Berkeley, founded during the gold rush days as the flagship institution of the University of California. This ...

  15. Department of Energy Selects U.C. Berkeley to Lead Consortium...

    Energy Savers [EERE]

    Center's Energy-Water Track Department of Energy Selects U.C. Berkeley to Lead Consortium for U.S.-China Clean Energy Research Center's Energy-Water Track August 20, 2015 - ...

  16. UC 9-9-403 - Native American Remains | Open Energy Information

    Open Energy Info (EERE)

    9-403 - Native American Remains Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-9-403 - Native American RemainsLegal...

  17. UC 9-9-405 - Native American Remains Review | Open Energy Information

    Open Energy Info (EERE)

    5 - Native American Remains Review Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 9-9-405 - Native American Remains...

  18. UC 76-9-704 - Criminal Penalties for Abuse of Human Body | Open...

    Open Energy Info (EERE)

    6-9-704 - Criminal Penalties for Abuse of Human Body Jump to: navigation, search OpenEI Reference LibraryAdd to library Legal Document- StatuteStatute: UC 76-9-704 - Criminal...

  19. Juchen Guo > Asst. Professor - UC Riverside > Center Alumni > The Energy

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Materials Center at Cornell Juchen Guo Asst. Professor - UC Riverside juchen.guo@ucr.edu Juchen received his B.S. degree in 1999 from Zhejiang University, and his Ph.D. degree in Chemical Engineering in 2007 from the University of Maryland. Before joining Prof. Archer's group in Nov. 2011, he worked as an Assistant Research Scientist at the University of Maryland. He is now an assistant professor at UC Riverside in the department of Chemical & Environmental Engineering

  20. Prospects for Nuclear Power(Davis 2012) | OpenEI Community

    Open Energy Info (EERE)

    Prospects for Nuclear Power(Davis 2012) Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:36 This paper analyzed the...

  1. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM...

    Broader source: Energy.gov (indexed) [DOE]

    STATE ENERGY PROGRAM PROGRAM NOTICE 10-010 EFFECTIVE DATE: May 6, 2010 SUBJECT: DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM PROJECTS INVOLVING RESIDENTIAL ...

  2. University of California, Davis, and Mass/Central America Win the

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Affordability Contest and Stevens Institute of Technology Wins in Market Appeal at U.S. Department of Energy Solar Decathlon | Department of Energy California, Davis, and Mass/Central America Win the Affordability Contest and Stevens Institute of Technology Wins in Market Appeal at U.S. Department of Energy Solar Decathlon University of California, Davis, and Mass/Central America Win the Affordability Contest and Stevens Institute of Technology Wins in Market Appeal at U.S. Department of

  3. OSTIblog Posts by Lynn Davis | OSTI, US Dept of Energy Office of Scientific

    Office of Scientific and Technical Information (OSTI)

    and Technical Information Lynn Davis Lynn Davis's picture Information Scientist, HQ Program Liaison, and product manager for the National Library of Energy(Beta) Refreshed National Library of Energy(Beta) Takes on Expanded Role in Disseminating Department of Energy Scientific and Technical Information Published on May 29, 2014 The National Library of EnergyBeta (NLEBeta), a gateway to information across the U.S. Department of Energy (DOE), is taking on an expanded role in providing access to

  4. Kim Davis Lebak Returns to New Mexico, excited about joining Field Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Kim Davis Lebak Returns to New Mexico, excited about joining Field Office Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Kim Davis Lebak returns to New Mexico, excited about joining Field Office A personal message from the DOE/NNSA Los Alamos Field Office Manager March 1, 2014 Kurt Steinhaus, Community Programs Office Director Kurt Steinhaus, Community Programs Office Director Contacts

  5. WPN 09-9: Guidance on Implementation of the Davis-Bacon Act Prevailing Wage

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Requirements in the American Recovery and Reinvestment Act of 2009 | Department of Energy 9: Guidance on Implementation of the Davis-Bacon Act Prevailing Wage Requirements in the American Recovery and Reinvestment Act of 2009 WPN 09-9: Guidance on Implementation of the Davis-Bacon Act Prevailing Wage Requirements in the American Recovery and Reinvestment Act of 2009 Archived 09/30/15, ARRA Completion To issue guidance to Weatherization Assistance Program participants, on implementing

  6. NNSA Appoints Kim Davis Lebak to Head Los Alamos Field Office | National

    National Nuclear Security Administration (NNSA)

    Nuclear Security Administration | (NNSA) Appoints Kim Davis Lebak to Head Los Alamos Field Office January 15, 2014 WASHINGTON, D.C. - The National Nuclear Security Administration (NNSA) has announced that Kim Davis Lebak will be the Los Alamos Field Office Manager effective January 2014. As Field Office Manager, Lebak will serve as the Secretary of Energy's senior representative on site at Los Alamos National Laboratory in New Mexico. "With her strong leadership skills and wide

  7. Department of Energy Selects U.C. Berkeley to Lead Consortium for

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    U.S.-China Clean Energy Research Center's Energy-Water Track | Department of Energy Selects U.C. Berkeley to Lead Consortium for U.S.-China Clean Energy Research Center's Energy-Water Track Department of Energy Selects U.C. Berkeley to Lead Consortium for U.S.-China Clean Energy Research Center's Energy-Water Track August 20, 2015 - 4:03pm Addthis NEWS MEDIA CONTACT (202) 586-4940 DOENews@hq.doe.gov WASHINGTON - The U.S. Department of Energy (DOE) has selected the University of California,

  8. CONTRACTOR REPORT SAND87-7011 Unlimited Release UC-60 E Pumped...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A t t n : L.H.Soderholm K . Jacksan west Wind ies P.O. Box 1705 Davis, CA 95617 M. Jackson M c A l l e s t e r Financial 1816 m t W. Iafayette, I N 47906 K a i s e r Aluminum...

  9. John N. Bahcall and Raymond Davis, Jr., 2003 | U.S. DOE Office of Science

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (SC) John N. Bahcall and Raymond Davis, Jr., 2003 The Enrico Fermi Award Fermi Award Home Nomination & Selection Guidelines Award Laureates 2010's 2000's 1990's 1980's 1970's 1960's 1950's Ceremony The Life of Enrico Fermi Contact Information The Enrico Fermi Award U.S. Department of Energy SC-2/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-2411 E: Email Us 2000's John N. Bahcall and Raymond Davis, Jr., 2003 Print Text Size: A A A FeedbackShare Page

  10. American Recovery & Reinvestment Act of 2009 (Recovery Act or ARRA) Davis-Bacon Act Requirements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    NNSA Albuquerque Service Center Labor Standards Training March 9, 2015 Eva M. Auman eva.auman@hq.doe.gov 1 Labor Standards Statutes  The Davis-Bacon Act (DBA)  Davis-Bacon and Related Acts (DBRA)  Contract Work Hours and Safety Standards Act (CWHSSA)  Copeland "Anti-Kickback" Act (CA)  Walsh-Healey Public Contracts Act (PCA)  McNamara-O'Hara Service Contract Act(SCA)  Miller Act (MA)  Fair Labor Standards Act (FLSA) 2 Labor Standards - Presidential Executive

  11. A New Campus Building on Efficiency: University of California (UC) Merced Case Study

    SciTech Connect (OSTI)

    2013-03-01

    The University of California (UC), Merced partnered with the U.S. Department of Energy (DOE) to develop and implement solutions to retrofit two existing buildings to reduce energy consumption by at least 30% as part of DOEs Commercial Buildings Partnerships (CBP) Program.

  12. Davis-Bacon Labor Rates for Weatherization Work in Multifamily Buildings

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Weatherization Assistance Program Notice 10-04 deals with labor rates (wages) for weatherization work in large multifamily buildings that comply with the Davis-Bacon Act requirements of the 2009 Recovery Act.

  13. Microsoft Word - DOE-ID-13-059 UC Irvine EC B3-15.doc

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    59 SECTION A. Project Title: Multiphase Nanocrystalline Ceramic Concept for Nuclear Fuel- University of California, Irvine SECTION B. Project Description The University of California, Irvine, in collaboration with the University of California, San Diego, University of Tennessee, and Los Alamos National Laboratory, proposes to explore the use of nanoparticles and nanostructured materials to create improved materials that can extend the service life for nuclear fuel. Work at UC-Irvine will include

  14. Late-time structure of the Bunch-Davies de Sitter wavefunction

    SciTech Connect (OSTI)

    Anninos, Dionysios; Anous, Tarek; Freedman, Daniel Z.; Konstantinidis, George

    2015-11-30

    We examine the late time behavior of the Bunch-Davies wavefunction for interacting light fields in a de Sitter background. We use perturbative techniques developed in the framework of AdS/CFT, and analytically continue to compute tree and loop level contributions to the Bunch-Davies wavefunction. We consider self-interacting scalars of general mass, but focus especially on the massless and conformally coupled cases. We show that certain contributions grow logarithmically in conformal time both at tree and loop level. We also consider gauge fields and gravitons. The four-dimensional Fefferman-Graham expansion of classical asymptotically de Sitter solutions is used to show that the wavefunction contains no logarithmic growth in the pure graviton sector at tree level. Finally, assuming a holographic relation between the wavefunction and the partition function of a conformal field theory, we interpret the logarithmic growths in the language of conformal field theory.

  15. Revised Davis-Bacon Wage Determinations for the Weatherization Assistance Program

    Broader source: Energy.gov [DOE]

    U.S. Department of Energy (DOE) Office of Energy Efficiency and Renewable Energy (EERE) Weatherization Assistance Program Notice 10-07 deals with wage determinations for states and U.S. territories that were issued by the U.S. Department of Labor for a new category of wage earners for weatherization that grantees will use to comply with the Davis-Bacon Act requirements under the 2009 Recovery Act

  16. Cloudy Skies W. Wiscombe and A. Davis NASA Goddard Space Flight Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    W. Wiscombe and A. Davis NASA Goddard Space Flight Center Climate & Radiation Branch Greenbelt, MD 20771 A. Marshak SSAI Lanham, MD 20706 Standard Gaussian-type statistics are not really adequate to describe atmospheric variability; this traditional approach implicitly dismisses fluctuations as "noise" of use only in computing a standard deviation which, together with the mean, presumably varies so little in space and time that one can meaningfully speak of

  17. Davis-Bacon Act Wage Rates for ARRA-Funded State Energy Program Projects Involving Residential Weatherization Work

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for Davis-Bacon Act (DBA) covered weatherization work performed under the State Energy Program (SEP) using American Recovery and Reinvestment Act of 2009 (ARRA) funds.

  18. Genomics Dan Rokhsar, DOE JGI/LBNL & UC Berkeley NERSC User Meeting

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    for Genomics Dan Rokhsar, DOE JGI/LBNL & UC Berkeley NERSC User Meeting 4 February 2014 Computing for Genomics * The DOE Joint Genome Institute - Who we are, what we do, and why * Two computational problems in genomics - "Assembling" genomes from "shotgun" sequence - "Annotating" "metagenomic" data 2 DOE JGI- A Genomics User Facility * In 1997, as part of the ramp-up for the human genome project, the DOE Office of Biological and Environmental Research

  19. DOE/NV/11718-036 UC-700 FEDERAL RADIOLOGICAL RESPONSE IN THE UNITED STATES

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11718-036 UC-700 FEDERAL RADIOLOGICAL RESPONSE IN THE UNITED STATES by Daryl J. Thomé Bechtel Nevada Remote Sensing Laboratory P.O. Box 98521 Las Vegas, Nevada, USA 89193-8521 Bruce W. Hurley, Ph.D. U.S. Department of Energy Nevada Operations Office P.O. Box 98518 Las Vegas, Nevada, USA 89193 ABSTRACT The Federal Radiological Monitoring and Assessment Center (FRMAC) is authorized by the Federal Radiological Emergency Response Plan (FRERP) to coordinate all off-site radiological response

  20. Davis Bacon

    Office of Energy Efficiency and Renewable Energy (EERE)

    1.  We have several jobs that are not listed on the WD table for our State from the WDOL website. It is my understanding that the contractor requests the additional classification & rate once...

  1. DOE/NV--471 UC-700 U.S. Department of Energy Nevada Operations Office

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    471 UC-700 U.S. Department of Energy Nevada Operations Office on on on on : ed : 2 Approved for public release; further distribution is authorized. E nv i r onm ent a l R es t or a t i D i v i s i N ev ada E nv i r onm ent al R es t or at i P r oj ect C or r ect i v e A ct i on D eci s i D ocu m ent , S econd Ga s S t a t i on, Tonopa h Tes t R a nge, N ev a da ( C or r ect i v e A ct i on U ni t N o. 403) C ont r ol l ed C opy N o.U ncont r ol l R ev i s i on N o. N ov em ber 1997 This report

  2. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED STATE ENERGY PROGRAM (SEP) PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for all Davis-Bacon Act (DBA) covered-work, including weatherization work, performed under the State Energy (SEP) Program using American Recovery and Reinvestment Act of 2009 (ARRA) funds to ensure compliance with DBA requirements.

  3. DOE/OR/20722-22 UC-70A DBaffu Formerly Utilized Sites Remedial Action Program (FUSRAP)

    Office of Legacy Management (LM)

    22 UC-70A DBaffu Formerly Utilized Sites Remedial Action Program (FUSRAP) Contract No. DE-ACO5-81OR20722 c P c P RADIOLOGICAL SURVEY REPORT FOR THE DUPONT CHAMBER WORKS PLANT Deepwater, New Jersey Bechtel National, Inc. Advanced Technology Division June 1984 Technical Information Center Office of Scientific and Technical Information U.S. Department of Energy -- .,,.... - ~S",.W -. - - -. _ -- --- --.- ----.-- ___ ..---. -.~ LEGAL NOTICE ' I91i.m report war prepared u M account of work

  4. EA-1982: Parker-Davis Transmission System Routine Operation and Maintenance Project and Proposed Integrated Vegetation Management Program

    Office of Energy Efficiency and Renewable Energy (EERE)

    Western Area Power Administration prepared an EA that assesses potential environmental impacts of the proposed continuation of operation and maintenance activities and implementation of a vegetation management program on Western’s Parker-Davis Transmission System in Arizona, California, and Nevada. These actions would occur on existing transmission line and access road rights-of-way, and at substations and maintenance facilities associated with the transmission system.

  5. Geomorphology and failure history of the earthquake-induced Farmington Siding landslide complex, Davis County, Utah

    SciTech Connect (OSTI)

    Lowe, M.; Harty, K.M. )

    1993-04-01

    The Farmington Siding landslide complex covers an area of 19.5 km[sup 2] in central Davis County. First identified and mapped in the 1970s, the feature was classified by previous researchers as a liquefaction-induced lateral spread based on surface geomorphology and exposures on the landslide complex. This was the first landslide in Utah to be attributed to earthquake-induced liquefaction. Geomorphic and geologic evidence indicate that the Farmington Sliding landslide complex likely consists of liquefaction-induced landslides that failed by means of both flow failure and lateral spreading. The landslide complex is located in an area underlain primarily by fine-grained deposits of Pleistocene Lake Bonneville and Holocene Great Salt Lake. Geomorphic features of the landslide complex include main and minor scarps, hummocks, closed depressions, and transverse lineaments. The main scarp consists mostly of a series of arcuate scallops near the left flank of the landslide, but it is a relatively linear, single scarp near the right flank of the landslide. Hummocks and closed depressions are most common near the head region of the landslide complex. Failure of the Farmington Sliding landslide complex has occurred at least twice. The older, distal portion of the landslide complex is cut by the Gilbert shoreline of the Bonneville lake cycle, indicating that landsliding occurred more than 10,000 years ago. In the younger portion of the landslide complex, landsliding has disrupted the Gilbert shoreline. Radiocarbon age estimates from trenches on a hummock near the main scarp of the younger landslide indicate that slope failure occurred sometime between about 2,730 [+-] 370 cal. yr B.P. and 4,530 [+-] 300 cal. yr B.P., possibly during the penultimate or antepenultimate surface-faulting earthquake on the Weber segment of the Wasatch fault zone.

  6. Motor carrier safety evaluation conducted at University of California, Los Alamos National Laboratory (UC/LANL), Los Alamos, NM

    SciTech Connect (OSTI)

    Garrison, R.F.

    1992-11-01

    The U.S. Department of Transportation Federal Highway Administration (DOT) conducts motor carrier safety evaluations for the purpose of determining a motor carrier`s safety fitness rating. Because it was believed that DOT or the State of New Mexico may not recognize UC/LANL exempt status and desire to inspect its transportation system and evaluate compliance with applicable laws and regulations, the lab contracted Garrison Associates to conduct a simulated motor carrier safety evaluation. This report enumerates the goals of this evaluation relevant to the Hazardous Materials Transportation Uniform Safety Act (HMTUSA) of 1990. The report describes the methodology of the evaluation and lists observations in order of importance.

  7. DOE/EV-0005/29 ORNL-5734 Dist. Category UC-70 Contract No. W-7405-eng-26

    Office of Legacy Management (LM)

    9 ORNL-5734 Dist. Category UC-70 Contract No. W-7405-eng-26 Health and Safety Research Division RADIOLOGICAL SURVEY OF THE FORMER KELLEX RESEARCH FACILITY, JERSEY CITY, NEW JERSEY B. A. Berven W. D. Cottrell H. W. Dickson R. W. Doane W. A. Goldsmith F. F. Haywood W. M. Johnson M. T. Ryan W. H. Shinpaugh Worked performed as part of the Remedial Action Survey and Certification Activities Date Published: February 1982 OAK RIDGE NATIONAL LABORATORY operated by UNION'CARBIDE CORPORATION for the

  8. Biogas Production Technologies

    Broader source: Energy.gov [DOE]

    Presentation about UC Davis's biogas technologies and integration with fuel cells. Presented by Ruihong Zhang, UC Davis, at the NREL/DOE Biogas and Fuel Cells Workshop held June 11-13, 2012, in Golden, Colorado.

  9. Microsoft PowerPoint - AWEA08-pitch1.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Acknowledgments Acknowledgments UC Davis UC Davis - - Professor Case van Dam Professor Case van Dam - - M. Leal M. Leal - - J.P. Baker J.P. Baker Sandia National Laboratories ...

  10. Preparation of UC0.07-0.10N0.90-0.93 spheres for TRISO coated fuel particles

    SciTech Connect (OSTI)

    Collins, Jack Lee; Hunt, Rodney Dale; Johnson, Jared A; Silva, Chinthaka M; Lindemer, Terrence

    2014-01-01

    The U.S. Department of Energy is considering a new nuclear fuel, which should be much more impervious during a loss of coolant accident. The fuel would consist of tristructural isotropic coated particles with dense uranium nitride (UN) kernels. The objectives of this effort are to make uranium oxide microspheres with adequately dispersed carbon nanoparticles and to convert these microspheres into UN kernels. Recent improvements to internal gelation process were successfully applied to the production of uranium gel spheres with different concentrations of carbon black. After the spheres were washed, a simple, two-step heat profile was used to produce kernels with a chemical composition of UC0.07 0.10N0.90 0.93. The first step involved heating the microspheres to 2023 K in a vacuum, and in the second step, the microspheres were held at 1873 K for 6 hrs in nitrogen.

  11. DAVIS-BACON ACT WAGE RATES FOR ARRA-FUNDED ENERGY EFFICIENCY AND CONSERVATION BLOCK GRANT (EECBG) PROGRAM PROJECTS INCLUDING RESIDENTIAL WEATHERIZATION WORK

    Broader source: Energy.gov [DOE]

    Guidance on using appropriate prevailing wage rates for all Davis-Bacon Act (DBA) covered-work, including weatherization work, performed under the Energy Efficiency and Conservation Block Grants (EECBG) Program using American Recovery and Reinvestment Act of 2009 (ARRA) funds to ensure compliance with DBA requirements.

  12. Thermochemical process for recovering Cu from CuO or CuO.sub.2

    DOE Patents [OSTI]

    Richardson, deceased, Donald M.; Bamberger, Carlos E.

    1981-01-01

    A process for producing hydrogen comprises the step of reacting metallic Cu with Ba(OH).sub.2 in the presence of steam to produce hydrogen and BaCu.sub.2 O.sub.2. The BaCu.sub.2 O.sub.2 is reacted with H.sub.2 O to form Cu.sub.2 O and a Ba(OH).sub.2 product for recycle to the initial reaction step. Cu can be obtained from the Cu.sub.2 O product by several methods. In one embodiment the Cu.sub.2 O is reacted with HF solution to provide CuF.sub.2 and Cu. The CuF.sub.2 is reacted with H.sub.2 O to provide CuO and HF. CuO is decomposed to Cu.sub.2 O and O.sub.2. The HF, Cu and Cu.sub.2 O are recycled. In another embodiment the Cu.sub.2 O is reacted with aqueous H.sub.2 SO.sub.4 solution to provide CuSO.sub.4 solution and Cu. The CuSO.sub.4 is decomposed to CuO and SO.sub.3. The CuO is decomposed to form Cu.sub.2 O and O.sub.2. The SO.sub.3 is dissolved to form H.sub.2 SO.sub.4. H.sub.2 SO.sub.4, Cu and Cu.sub.2 O are recycled. In another embodiment Cu.sub.2 O is decomposed electrolytically to Cu and O.sub.2. In another aspect of the invention, Cu is recovered from CuO by the steps of decomposing CuO to Cu.sub.2 O and O.sub.2, reacting the Cu.sub.2 O with aqueous HF solution to produce Cu and CuF.sub.2, reacting the CuF.sub.2 with H.sub.2 O to form CuO and HF, and recycling the CuO and HF to previous reaction steps.

  13. Microsoft PowerPoint - budget_meeting_presentation_2008_24.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Collaborators are key participants in all aspects of the program Domestic Princeton Plasma Physics Lab U. Texas FRC U. Alaska UC-Davis UC-Los Angeles UC-San Diego CompX...

  14. Microsoft PowerPoint - work_proposal_video_OFES_videoconference...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Collaborators are key participants in all aspects of the program Domestic Princeton Plasma Physics Lab U. Texas FRC U. Alaska UC-Davis UC-Los Angeles UC-San Diego CompX...

  15. Microsoft PowerPoint - budget_meeting_presentation_2007_15.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    are Significant in all Aspects of the Program Domestic Institutions Princeton Plasma Physics Lab U. Texas FRC U. Alaska UC-Davis UC-Los Angeles UC-San Diego CompX...

  16. Cost of presumptive source term Remedial Actions Laboratory for energy-related health research, University of California, Davis

    SciTech Connect (OSTI)

    Last, G.V.; Bagaasen, L.M.; Josephson, G.B.; Lanigan, D.C.; Liikala, T.L.; Newcomer, D.R.; Pearson, A.W.; Teel, S.S.

    1995-12-01

    A Remedial Investigation/Feasibility Study (RI/FS) is in progress at the Laboratory for Energy Related Health Research (LEHR) at the University of California, Davis. The purpose of the RI/FS is to gather sufficient information to support an informed risk management decision regarding the most appropriate remedial actions for impacted areas of the facility. In an effort to expedite remediation of the LEHR facility, the remedial project managers requested a more detailed evaluation of a selected set of remedial actions. In particular, they requested information on both characterization and remedial action costs. The US Department of Energy -- Oakland Office requested the assistance of the Pacific Northwest National Laboratory to prepare order-of-magnitude cost estimates for presumptive remedial actions being considered for the five source term operable units. The cost estimates presented in this report include characterization costs, capital costs, and annual operation and maintenance (O&M) costs. These cost estimates are intended to aid planning and direction of future environmental remediation efforts.

  17. UC-700 Envi

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Transport Modeling sk Assessment of the Underground Test Area, Nevada Test Site, Nevada October 1997 Environmental Restoration Approved for publ c re ease; further dissem ted. ...

  18. KAPL-4756 UC-901

    Office of Scientific and Technical Information (OSTI)

    oxide at temperatures below 83C for a dissolved hydrogen concentration of 234 pmolkg. The level of dissolved hydrogen was shown to affect the Fe(OH)JF%O, transformation ...

  19. Rich Davies- Biography

    Broader source: Energy.gov [DOE]

    As the Project Lifecycle Steward at PNNL, he has provided leadership and management to more effectively and efficiently enable the conduct of research and development.

  20. Ryan Davis | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Biochemical conversion process pathways Algal biomass production and conversion pathways Hydroprocessing technologies Affiliated Research Programs Biochemical AnalysisTEA Modeling ...

  1. Technical evaluation of the noise and isolation testing of the reactor protection system for the Davis Besse Nuclear Power Station, Unit 1

    SciTech Connect (OSTI)

    Selan, J.C.

    1980-01-01

    This report documents the technical evaluation of the noise and isolation testing of the reactor protection system (RPS) for the Davis Besse Nuclear Power Station, Unit 1. The testing was performed in accordance to Section 4.6.11, Susceptibility, of MIL-N-19900B, and NRC approved plant test methods. Analysis of the test results shows that the reactor protection system did not degrade below acceptable levels when subjected to electromagnetic, electrostatic, isolation and noise level tests, nor was the system's ability to perform its Class 1E protective functions affected.

  2. Distributed Energy Resource Optimization Using a Software as Service (SaaS) Approach at the University of California, Davis Campus

    SciTech Connect (OSTI)

    Stadler, Michael; Marnay, Chris; Donadee, Jon; Lai, Judy; Megel, Olivier; Bhattacharya, Prajesh; Siddiqui, Afzal

    2011-02-06

    Together with OSIsoft LLC as its private sector partner and matching sponsor, the Lawrence Berkeley National Laboratory (Berkeley Lab) won an FY09 Technology Commercialization Fund (TCF) grant from the U.S. Department of Energy. The goal of the project is to commercialize Berkeley Lab's optimizing program, the Distributed Energy Resources Customer Adoption Model (DER-CAM) using a software as a service (SaaS) model with OSIsoft as its first non-scientific user. OSIsoft could in turn provide optimization capability to its software clients. In this way, energy efficiency and/or carbon minimizing strategies could be made readily available to commercial and industrial facilities. Specialized versions of DER-CAM dedicated to solving OSIsoft's customer problems have been set up on a server at Berkeley Lab. The objective of DER-CAM is to minimize the cost of technology adoption and operation or carbon emissions, or combinations thereof. DER-CAM determines which technologies should be installed and operated based on specific site load, price information, and performance data for available equipment options. An established user of OSIsoft's PI software suite, the University of California, Davis (UCD), was selected as a demonstration site for this project. UCD's participation in the project is driven by its motivation to reduce its carbon emissions. The campus currently buys electricity economically through the Western Area Power Administration (WAPA). The campus does not therefore face compelling cost incentives to improve the efficiency of its operations, but is nonetheless motivated to lower the carbon footprint of its buildings. Berkeley Lab attempted to demonstrate a scenario wherein UCD is forced to purchase electricity on a standard time-of-use tariff from Pacific Gas and Electric (PG&E), which is a concern to Facilities staff. Additionally, DER-CAM has been set up to consider the variability of carbon emissions throughout the day and seasons. Two distinct analyses of

  3. Hydrodynamic evolution and jet energy loss in Cu + Cu collisions

    SciTech Connect (OSTI)

    Schenke, Bjoern; Jeon, Sangyong; Gale, Charles

    2011-04-15

    We present results from a hybrid description of Cu + Cu collisions using (3 + 1)-dimensional hydrodynamics (music) for the bulk evolution and a Monte Carlo simulation (martini) for the evolution of high-momentum partons in the hydrodynamical background. We explore the limits of this description by going to small system sizes and determine the dependence on different fractions of wounded nucleon and binary collisions scaling of the initial energy density. We find that Cu + Cu collisions are well described by the hybrid description at least up to 20% central collisions.

  4. Cu 2 S 3 complex on Cu(111) as a candidate for mass transport...

    Office of Scientific and Technical Information (OSTI)

    Cu 2 S 3 complex on Cu(111) as a candidate for mass transport enhancement Citation Details In-Document Search Title: Cu 2 S 3 complex on Cu(111) as a candidate for mass transport ...

  5. cu | OpenEI Community

    Open Energy Info (EERE)

    ancient building system architect biomimicry building technology cooling cu daylight design problem energy use engineer fred andreas geothermal green building heat transfer...

  6. Science DMZ Implemented at CU Boulder

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CU Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU ...

  7. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 New Hampshire - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle ...

  8. Sandia National Laboratories: News: Publications: Lab News

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    needed to bring an idea to reality, said Andrew Hargadon, director of the Child Family Institute for Innovation and Entrepreneurship and a UC Davis professor of technology...

  9. Simplified Models for LHC New Physics Searches (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Hedri, Sonia ; SLAC ; Essig, Rouven, 1 ; SLAC ; Evans, Jared A. ; UC, Davis ; Fitzpatrick, Liam ; Boston U. ; Fox, Patrick ; Fermilab ; Franceschini, Roberto ; LPHE,...

  10. SSRL29 Workshop Summaries

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    science. Chuck Fadley (LBL & UC Davis) gave an overview of holographic imaging of local atomic structure. He concluded that with the development of better detector systems...

  11. DOE ARM SP2 Deployment at Boston College_Aerodyne led Coated...

    Office of Scientific and Technical Information (OSTI)

    ... UC Davis: Chris Cappa and Taylor Helgestad Instrumentation: Photo-acoustic Spectrometer ... Onasch, Andrew Freedman, Leah Williams, Taylor Helgestad, Christopher Cappa, Al Fischer, ...

  12. Largest American Net Zero Energy Campus Community Embraces Clean Energy

    Broader source: Energy.gov [DOE]

    A new housing development on the UC Davis campus is planning to bring a new source of renewable energy to its community.

  13. Simplified Models for LHC New Physics Searches (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Argonne Northwestern U. Rutgers U., Piscataway Rutgers U., Piscataway Carleton U. CERN UC, Davis Wisconsin U., Madison SLAC SLAC SLAC Rutgers U., Piscataway Syracuse...

  14. ANI-testbed-ESCC-Feb2011.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Ben Yoo, UC Davis - Industry: Bikash Koley (Google); David Richardson (Amazon); Steve Wolff (Cisco); Wes Doonan, Adva - International: Cees De Laat, U Amsterdam; Mauro Camponelli, ...

  15. 2016 CIG (Computational Infrastructure for Geodynamics) All Hands...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2016 CIG (Computational Infrastructure for Geodynamics) All Hands Meeting Start Date: Jun 17 2016 (All day) to Jun 24 2016 (All day) Location: UC Davis Event Website: https:...

  16. ALSNews Vol. 324

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Channel Canada program "Daily Planet," marking the anniversary of the September 11 terrorist attacks. Cahill (DELTA Group, UC Davis) collected air samples about a mile...

  17. ALS Doctoral Fellowship in Residence

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ghiassi (UC Davis), Yifan Ye (University of Science and Technology of China), Man-Hong Wong (University of Illinois at Urbana-Champaign), Anya Rasmussen (Washington State...

  18. HYDROGEN AND FUEL CELL EDUCATION AT CALIFORNIA STATE UNIVERSITY...

    Broader source: Energy.gov (indexed) [DOE]

    More Documents & Publications UC Davis Fuel Cell, Hydrogen, and Hybrid Vehicle (FCH2V) GATE Center of Excellence Hydrogen Education Curriculum Path at Michigan Technological ...

  19. Evaluation of Ultrasonic Time-of-Flight Diffraction Data for Selected Control Rod Drive Nozzles from Davis Besse Nuclear Power Plant

    SciTech Connect (OSTI)

    Cumblidge, Stephen E.; Cinson, Anthony D.; Anderson, Michael T.

    2011-04-25

    Pacific Northwest National Laboratory (PNNL) examined ultrasonic (UT) time-of-flight diffraction (TOFD) data from ten (10) nozzles in the Davis Besse Nuclear Power Plant reactor closure head. The TOFD data was acquired by AREVA after a bare metal visual examination of the pressure vessel head indicated potential leakage in at least one nozzle. A detailed analysis of the UT data shows that Nozzle 4 has three indications consistent with cracking in the penetration tube. One of the indications starts at the wetted side of the weld and progresses to the annulus. In addition, examination of UT data from the annulus region of Nozzle 4 displays an irregular pattern that could be associated with boric acid deposits and leakage/wastage in the interference fit. The review of TOFD data for the other nine nozzles resulted in several indications being detected in the weld region and near the inner diameter (ID) and outer diameter (OD) surfaces of the penetration tube, but no other indications that are consistent with cracking that may have resulted in leakage were observed. A review of the back-wall reflections in the other nine nozzles also did not show strong indications of leakage, although Nozzle 67 displayed an irregularly-shaped region of high ultrasonic transmission near 180 degrees on the interference fit.

  20. I Unlimited Release UC-70

    Office of Scientific and Technical Information (OSTI)

    ... This slight rise of temperature in deeper waters is due to the adiabatic warming effect. ... in 1980. Modelling -- A rough sketch of a global model for biological transfer of ...

  1. LA-10733-MS UC-15

    Office of Scientific and Technical Information (OSTI)

    These corrections involve the solution of a rather simple differential equation, a process taught in all elementary courses on differential equations. The solution to this equation ...

  2. Property:NEPA CU Document | Open Energy Information

    Open Energy Info (EERE)

    CU Document Jump to: navigation, search Property Name NEPA CU Document Property Type Page Description CU files for NEPA Docs. Typically Casual Use Documentation consists of a...

  3. Software-Defined Solutions for Managing Energy Use in Small Commercial Buildings

    Office of Energy Efficiency and Renewable Energy (EERE)

    Lead Performer: University of California, Berkeley Project Partners: -- California Institute for Energy & Enviornment - Berkeley, CA -- Software Defined Buildings/EECS/UC Berkeley - Berkeley, CA -- Western Regional Cooling Center/UC Davis - Davis, CA -- Lawrence Berkeley National Laboratory - Berkeley, CA -- Building Robotics - Oakland, CA

  4. Geographically-Based Infrastructure Analysis for California

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Geographically-Based Infrastructure Analysis for California Joan Ogden Institute of Transportation Studies University of California, Davis Presented at the USDOE Hydrogen Transition Analysis Meeting Washington, DC August 9-10, 2006 Acknowledgments UC Davis Researchers: Michael Nicholas Dr. Marc Melaina Dr. Marshall Miller Dr. Chris Yang USDOE: Dr. Sig Gronich Research support: USDOE; H2 Pathways Program sponsors at UC Davis * Refueling station siting and sizing are key aspects of designing H2

  5. Phase transformation between Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) compounds formed on single crystalline Cu substrate during solid state aging

    SciTech Connect (OSTI)

    Tian, Feifei; Liu, Zhi-Quan Guo, Jingdong

    2014-01-28

    Interfacial reactions between eutectic SnIn and single crystalline Cu during solid-state aging at low temperature were investigated systematically. Three types of phase transformations between Cu(In,Sn){sub 2} layer and Cu{sub 2}(In,Sn) layer were observed, which are Cu(In,Sn){sub 2} grows and Cu{sub 2}(In,Sn) consumes at 40?C, Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) grow simultaneously at 60?C, as well as Cu(In,Sn){sub 2} consumes and Cu{sub 2}(In,Sn) grows at 80 and 100?C. According to physicochemical approach, the chemical reactions at Cu/Cu{sub 2}(In,Sn)/Cu(In,Sn){sub 2}/SnIn interfaces were discussed in detail. It was concluded that the diffusion ability of Cu and In atoms dominated different phase transformations. When diffusion constants k{sub 1In2}?>?8/3k{sub 1Cu2} Cu(In,Sn){sub 2} will grow, and if k{sub 1Cu2}???k{sub 1In2} Cu{sub 2}(In,Sn) will grow. Both Cu(In,Sn){sub 2} and Cu{sub 2}(In,Sn) can grow in the condition of k{sub 1In2} ? k{sub 1Cu2}. The values of k{sub 1Cu2} and k{sub 1In2} at different temperatures on (100)Cu and (111)Cu substrate were also calculated or estimated by analyzing the growth kinetics of the compound layers.

  6. Performance and mix measurements of indirect drive Cu doped Be...

    Office of Scientific and Technical Information (OSTI)

    Performance and mix measurements of indirect drive Cu doped Be implosions Citation Details In-Document Search Title: Performance and mix measurements of indirect drive Cu doped Be ...

  7. Understanding the Deactivation Mechanisms of Cu/Zeolite SCR Catalysts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deactivation Mechanisms of CuZeolite SCR Catalysts in Diesel Application Understanding the Deactivation Mechanisms of CuZeolite SCR Catalysts in Diesel Application To understand ...

  8. Investigation of Sulfur Deactivation on Cu/Zeolite SCR Catalysts...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Sulfur Deactivation on CuZeolite SCR Catalysts in Diesel Application Investigation of Sulfur Deactivation on CuZeolite SCR Catalysts in Diesel Application Investigation of Sulfur ...

  9. Origins of optical absorption characteristics of Cu2+ complexes...

    Office of Scientific and Technical Information (OSTI)

    Origins of optical absorption characteristics of Cu2+ complexes in solutions Citation Details In-Document Search Title: Origins of optical absorption characteristics of Cu2+ ...

  10. Cu-Cu direct bonding achieved by surface method at room temperature

    SciTech Connect (OSTI)

    Utsumi, Jun [Advanced Technology Research Center, Mitsubishi Heavy Industries, Ltd., 1-8-1 Sachiura, Kanazawa-ku, Yokohama 236-8515 (Japan); Ichiyanagi, Yuko, E-mail: yuko@ynu.ac.jp [Department of Physics, Graduate School of Engineering, Yokohama National University, Tokiwadai, Hodogaya, Yokohama 240-8501 (Japan)

    2014-02-20

    The metal bonding is a key technology in the processes for the microelectromechanical systems (MEMS) devices and the semiconductor devices to improve functionality and higher density integration. Strong adhesion between surfaces at the atomic level is crucial; however, it is difficult to achieve close bonding in such a system. Cu films were deposited on Si substrates by vacuum deposition, and then, two Cu films were bonded directly by means of surface activated bonding (SAB) at room temperature. The two Cu films, with the surface roughness Ra about 1.3nm, were bonded by using SAB at room temperature, however, the bonding strength was very weak in this method. In order to improve the bonding strength between the Cu films, samples were annealed at low temperatures, between 323 and 473 K, in air. As the result, the Cu-Cu bonding strength was 10 times higher than that of the original samples without annealing.

  11. Accelerating Fatigue Testing for Cu Ribbon Interconnects (Presentation)

    SciTech Connect (OSTI)

    Bosco, N.; Silverman, T.; Wohlgemuth , J.; Kurtz, S.; Inoue, M.; Sakurai, K.; Shioda, T.; Zenkoh, H.; Miyashita, M.; Tadanori, T.; Suzuki, S.

    2013-05-01

    This presentation describes fatigue experiments and discusses dynamic mechanical loading for Cu ribbon interconnects.

  12. Direct Epoxidation of Propylene over Stabilized Cu+ Surface Sites on Ti Modified Cu2O

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, X.; Kattel, S.; Xiong, K.; Mudiyanselage, K.; Rykov, S.; Senanayake, S. D.; Rodriguez, J. A.; Liu, P.; Stacchiola, D. J.; Chen, J. G.

    2015-07-17

    Direct propylene epoxidation by O2 is a challenging reaction because of the strong tendency for complete combustion. Results from the current study demonstrate the feasibility to tune the epoxidation selectivity by generating highly dispersed and stabilized Cu+ active sites in a TiCuOx mixed oxide. The TiCuOx surface anchors the key surface intermediate, oxametallacycle, leading to higher selectivity for epoxidation of propylene.

  13. Theoretical study on the CuH + H. -->. Cu + H/sub 2/ reaction pathway

    SciTech Connect (OSTI)

    Ruiz, M.E.; Garcia-Prieto, J.; Poulain, E.; Ozin, G.A.; Poirier, R.A.; Matta, S.M.; Czismadia, I.G.; Gracie, C.; Novaro, O.

    1986-01-16

    Quite recently, experimental results on the CuH + H ..-->.. Cu + H/sub 2/ thermal matrix phase reaction were reported, indicating that it proceeds with no activation barrier, and no evidence exists for an intermediate CuH/sub 2/ species at 10-13 K. Here the authors present a theoretical study of this reaction using variational and perturbational configuration interaction calculations with a relativistic pseudopotential (PSHONDO-CIPSI) set of programs. The results confirm the lack of a barrier and provide an explanation as to why the CuH/sub 2/ species may not be observed. 11 references, 3 figures, 3 tables.

  14. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Alaska - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S2. Summary statistics for natural gas - Alaska, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 269 277 185 R 159 170 Production (million cubic feet) Gross Withdrawals From Gas Wells 127,417 112,268

  15. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 District of Columbia - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S9. Summary statistics for natural gas - District of Columbia, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells

  16. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Indiana - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S16. Summary statistics for natural gas - Indiana, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 620 914 819 R 921 895 Production (million cubic feet) Gross Withdrawals From Gas Wells 6,802 9,075

  17. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Massachusetts - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S23. Summary statistics for natural gas - Massachusetts, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 0

  18. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Nebraska - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S29. Summary statistics for natural gas - Nebraska, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 276 322 270 R 357 310 Production (million cubic feet) Gross Withdrawals From Gas Wells 2,092 1,854

  19. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    50 North Dakota - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S36. Summary statistics for natural gas - North Dakota, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 188 239 211 200 200 Production (million cubic feet) Gross Withdrawals From Gas Wells

  20. Comparative study of the alloying effect on the initial oxidation of Cu-Au(100) and Cu-Pt(100)

    SciTech Connect (OSTI)

    Luo, Langli; Zhou, Guangwen; Kang, Yihong; Yang, Judith C.; Su, Dong; Stach, Eric A.

    2014-03-24

    Using in situ transmission electron microscopy, we show that the oxidation of the Cu-Au(100) results in the formation of Cu{sub 2}O islands that deeply embed into the Cu-Au substrate while the oxidation of the Cu-Pt(100) leads to the formation of Cu{sub 2}O islands that highly protrude above the Cu-Pt substrate. Their difference is attributed to the different mobilities of Pt and Au in the Cu base alloys for which the sluggish mobility of Pt in Cu results in trapped Pt atoms at the oxide/alloy interface while the faster mobility of Au in Cu leads to enhanced rehomogenization of the alloy composition.

  1. Science DMZ Implemented at CU Boulder

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CU Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU Science DMZ @ Penn & VTTI Science DMZ @ NOAA Science DMZ @ NERSC Science DMZ @ ALS Multi-facility Workflow Case Study Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site

  2. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Alabama - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S1. Summary statistics for natural gas - Alabama, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 7,026 7,063 6,327 R 6,165 6,118 Production (million cubic feet) Gross Withdrawals From Gas Wells

  3. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Arkansas - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S4. Summary statistics for natural gas - Arkansas, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 7,397 8,388 8,538 R 9,843 10,150 Production (million cubic feet) Gross Withdrawals From Gas Wells

  4. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 California - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S5. Summary statistics for natural gas - California, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 1,580 1,308 1,423 R 1,335 1,118 Production (million cubic feet) Gross Withdrawals From Gas

  5. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Colorado - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S6. Summary statistics for natural gas - Colorado, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 28,813 30,101 32,000 R 32,468 38,346 Production (million cubic feet) Gross Withdrawals From Gas

  6. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Florida - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S10. Summary statistics for natural gas - Florida, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 17,182 16,459 19,742

  7. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Georgia - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S11. Summary statistics for natural gas - Georgia, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 0 From Oil Wells

  8. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Idaho - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S14. Summary statistics for natural gas - Idaho, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 0 From Oil Wells 0 0

  9. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Illinois - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S15. Summary statistics for natural gas - Illinois, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 50 40 40 R 34 36 Production (million cubic feet) Gross Withdrawals From Gas Wells E 1,697 2,114

  10. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Iowa - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S17. Summary statistics for natural gas - Iowa, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 0 From Oil Wells 0 0 0

  11. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Kansas - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S18. Summary statistics for natural gas - Kansas, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 22,145 25,758 24,697 R 23,792 24,354 Production (million cubic feet) Gross Withdrawals From Gas Wells

  12. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Kentucky - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S19. Summary statistics for natural gas - Kentucky, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 17,670 14,632 17,936 R 19,494 19,256 Production (million cubic feet) Gross Withdrawals From Gas

  13. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Louisiana - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S20. Summary statistics for natural gas - Louisiana, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 19,137 21,235 19,792 R 19,528 19,251 Production (million cubic feet) Gross Withdrawals From Gas

  14. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Maine - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S21. Summary statistics for natural gas - Maine, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 0 0 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 0 From Oil Wells 0 0

  15. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Michigan - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S24. Summary statistics for natural gas - Michigan, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 10,100 11,100 10,900 R 10,550 10,500 Production (million cubic feet) Gross Withdrawals From Gas

  16. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Mississippi - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S26. Summary statistics for natural gas - Mississippi, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 1,979 5,732 1,669 R 1,967 1,645 Production (million cubic feet) Gross Withdrawals From Gas

  17. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Missouri - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S27. Summary statistics for natural gas - Missouri, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 53 100 R 26 28 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 R 8 8 From

  18. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Montana - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S28. Summary statistics for natural gas - Montana, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 6,059 6,477 6,240 5,754 5,754 Production (million cubic feet) Gross Withdrawals From Gas Wells

  19. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Nevada - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S30. Summary statistics for natural gas - Nevada, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 0 0 0 R 4 4 Production (million cubic feet) Gross Withdrawals From Gas Wells 0 0 0 0 3 From Oil Wells

  20. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 New Mexico - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S33. Summary statistics for natural gas - New Mexico, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 44,748 32,302 28,206 R 27,073 27,957 Production (million cubic feet) Gross Withdrawals From

  1. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 New York - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S34. Summary statistics for natural gas - New York, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 6,736 6,157 7,176 R 6,902 7,119 Production (million cubic feet) Gross Withdrawals From Gas Wells

  2. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    2 Ohio - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S37. Summary statistics for natural gas - Ohio, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 34,931 46,717 35,104 R 32,664 32,967 Production (million cubic feet) Gross Withdrawals From Gas Wells

  3. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Oklahoma - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S38. Summary statistics for natural gas - Oklahoma, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 44,000 41,238 40,000 39,776 40,070 Production (million cubic feet) Gross Withdrawals From Gas

  4. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Oregon - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S39. Summary statistics for natural gas - Oregon, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 26 24 27 R 26 28 Production (million cubic feet) Gross Withdrawals From Gas Wells 1,407 1,344 770 770

  5. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Pennsylvania - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S40. Summary statistics for natural gas - Pennsylvania, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 44,500 54,347 55,136 R 53,762 70,400 Production (million cubic feet) Gross Withdrawals

  6. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Tennessee - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S44. Summary statistics for natural gas - Tennessee, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 230 210 212 R 1,089 1,024 Production (million cubic feet) Gross Withdrawals From Gas Wells 5,144

  7. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Texas - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S45. Summary statistics for natural gas - Texas, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 95,014 100,966 96,617 97,618 98,279 Production (million cubic feet) Gross Withdrawals From Gas Wells

  8. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    0 Utah - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S46. Summary statistics for natural gas - Utah, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 6,075 6,469 6,900 R 7,030 7,275 Production (million cubic feet) Gross Withdrawals From Gas Wells 328,135

  9. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Virginia - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S48. Summary statistics for natural gas - Virginia, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 7,470 7,903 7,843 R 7,956 7,961 Production (million cubic feet) Gross Withdrawals From Gas Wells

  10. Million Cu. Feet Percent of National Total

    U.S. Energy Information Administration (EIA) Indexed Site

    8 West Virginia - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S50. Summary statistics for natural gas - West Virginia, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 52,498 56,813 50,700 R 54,920 60,000 Production (million cubic feet) Gross Withdrawals

  11. Earth-Abundant Cu-based Chalcogenide Materials as Photovoltaic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Photovoltaic (PV) conversion is demonstrated for the first time in Cu 3 PSe 4 , a member ... Earth-Abundant Cu-based Chalcogenide Materials as Photovoltaic Absorbers Research Details ...

  12. The Effects of Hydrothermal Agingon a Commercial Cu SCR Catalyst

    Broader source: Energy.gov [DOE]

    Examines the effect of hydrothermal aging on the Nox reduction over a commercial Cu-zeolite SCR catalyst.

  13. OPERATIONS AND PERFORMANCE OF RHIC AS A CU-CU COLLIDER.

    SciTech Connect (OSTI)

    PILAT, R.; AHRENS, L.; BAI, M.; BARTON, D.S.; ET AL.

    2005-05-16

    The 5th year of RHIC operations, started in November 2004 and expected to last till June 2005, consists of a physics run with Cu-Cu collisions at 100 GeV/u followed by one with polarized protons (pp) at 100 GeV [l]. We will address here the overall performance of the RHIC complex used for the first time as a Cu-Cu collider, and compare it with previous operational experience with Au, PP and asymmetric d-Au collisions. We will also discuss operational improvements, such as a {beta}* squeeze to 85cm in the high luminosity interaction regions from the design value of 1m, system improvements, machine performance and limitations, and address reliability and uptime issues.

  14. Cu(II) promotes amyloid pore formation

    SciTech Connect (OSTI)

    Zhang, Hangyu; Rochet, Jean-Christophe; Stanciu, Lia A.

    2015-08-14

    The aggregation of α-synuclein is associated with dopamine neuron death in Parkinson's disease. There is controversy in the field over the question of which species of the aggregates, fibrils or protofibrils, are toxic. Moreover, compelling evidence suggested the exposure to heavy metals to be a risk of PD. Nevertheless, the mechanism of metal ions in promoting PD remains unclear. In this research, we investigated the structural basis of Cu(II) induced aggregation of α-synuclein. Using transmission electron microscopy experiments, Cu(II) was found to promote in vitro aggregation of α-synuclein by facilitating annular protofibril formation rather than fibril formation. Furthermore, neuroprotective baicalein disaggregated annular protofibrils accompanied by considerable decrease of β-sheet content. These results strongly support the hypothesis that annular protofibrils are the toxic species, rather than fibrils, thereby inspiring us to search novel therapeutic strategies for the suppression of the toxic annular protofibril formation. - Highlights: • Cu(II) promoted the annular protofibril formation of α-synuclein in vitro. • Cu(II) postponed the in vitro fibrillization of α-synuclein. • Neuroprotective baicalein disaggregated annular protofibrils.

  15. SANDIA REPORT SAND974443 UC-1350

    Office of Scientific and Technical Information (OSTI)

    ... A high-speed motorgenerator set is part of the power conversion system in the FES system. ... housing containing: Bearing Controller, MotorGenerator Controller, Power Conversion ...

  16. LA-11569-M Manual UC-15

    Office of Scientific and Technical Information (OSTI)

    ... sample well.3 A motor- driven cable moves the source into position where it irradiates the sample for a few seconds, then quickly withdraws the source to a shielded posi- tion. ...

  17. High energy physics at UC Riverside

    SciTech Connect (OSTI)

    1997-07-01

    This report discusses progress made for the following two tasks: experimental high energy physics, Task A, and theoretical high energy physics, Task B. Task A1 covers hadron collider physics. Information for Task A1 includes: personnel/talks/publications; D0: proton-antiproton interactions at 2 TeV; SDC: proton-proton interactions at 40 TeV; computing facilities; equipment needs; and budget notes. The physics program of Task A2 has been the systematic study of leptons and hadrons. Information covered for Task A2 includes: personnel/talks/publications; OPAL at LEP; OPAL at LEP200; CMS at LHC; the RD5 experiment; LSND at LAMPF; and budget notes. The research activities of the Theory Group are briefly discussed and a list of completed or published papers for this period is given.

  18. Distribution Category UC-66f F

    Office of Scientific and Technical Information (OSTI)

    ... 3, 1975, p. 1949. Anon., "Indian Point: Consoli6ated Edison's Thorium Converter", Nucl. ... i n A l t e r n a t i v e Energy Sources, J. P. H a r t n e t t , ed., Academic P ...

  19. TID-4500, UC-4 Chemistry Lawpenoe R

    Office of Scientific and Technical Information (OSTI)

    ... was also investigated. in the standard copper cylinder a r e p r e - sented in Fig. 5 . ... wave l e n s 2 Comp B Cylinder: OFHC Copper, ASTM-B-187, density 8.93 gcc, i .d. ...

  20. UCRL-53768 Distribution Category UC-34 DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... between experiment and experimenter increases the complexity of the measuring apparatus. ... The opportunity to observe this phenomenon provided the motivation measuring the EOS for ...

  1. UCRL-53768 Distribution Category UC-34 DISCLAIMER

    Office of Scientific and Technical Information (OSTI)

    ... mixture consisting cf molecular hydrogen and carbon in a dense diamond- like phase. ... metallic form of hydrogen representing one of the primary components in the middle layer. ...

  2. LA-9252-MS UC-70a

    Office of Legacy Management (LM)

    ... Scientific Committee on the Effects of Atomic Radiation, "Sources and Effects of ... Gogolak, "In situ Ge(Li) and NaI(T1) Gamma-Ray Spectrometry," Health amSafety Laboratory ...

  3. Scientific Data Management Integrated Software Infrastructure Center (SDM/ISIC): Scientific Process Automation (SPA), FINAL REPORT

    SciTech Connect (OSTI)

    Bertram Ludaescher; Ilkay Altintas

    2012-07-03

    This is the final report from SDSC and UC Davis on DE-FC02-01ER25486, Scientific Data Management Integrated Software Infrastructure Center (SDM/ISIC): Scientific Process Automation (SPA).

  4. Leading Edge Erosion Phase II Wind Tunnel Test Begins

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Wind tunnel testing is commencing for the second phase of the leading edge erosion project, which is a collaboration between Texas A&M, UC Davis, and Sandia. During the 2012 fiscal ...

  5. 2012 SSAA Awards | National Nuclear Security Administration ...

    National Nuclear Security Administration (NNSA)

    Stanford University Ultra-High Speed Neutral Plasma Jets and their Interactions with ... Z-pinch research on radiation, atomic and plasma physics Scalettar, R. UC - Davis High-Z ...

  6. Heavy Quarkonium: Progress, Puzzles, and Opportunities (Journal...

    Office of Scientific and Technical Information (OSTI)

    Dept. ; Vogt, R. ; LLNL, Livermore UC, Davis ; Bodwin, G.T. ; Argonne, HEP ; Eichten, E. ; Fermilab ; Frawley, A.D. ; Florida State U. ; Meyer, A.B. ; DESY ; Mitchell, R.E. ; ...

  7. Triaxial Stress Distributions in Cu / low-k Interconnect Features

    SciTech Connect (OSTI)

    C Murray; P Besser; E Ryan; J Jordan-Sweet

    2011-12-31

    The distribution of triaxial stresses within single damascene Cu/organosilicate interconnect structures as a function of linewidth, ranging from 45 to 250 nm, was measured using x-ray diffraction. Least-squares minimization techniques were employed to determine the volume-averaged stress tensors of the Cu features. Longitudinal Cu stress values increased for linewidths below 100 nm, while transverse stresses decreased with decreasing linewidth below 100 nm due to the interplay between the Cu microstructure and the feature geometry. Large tensile out-of-plane stresses were observed in all of the lines demonstrating the constraint imposed by the barrier layers that encapsulate the Cu.

  8. Bi-Se doped with Cu, p-type semiconductor

    DOE Patents [OSTI]

    Bhattacharya, Raghu Nath; Phok, Sovannary; Parilla, Philip Anthony

    2013-08-20

    A Bi--Se doped with Cu, p-type semiconductor, preferably used as an absorber material in a photovoltaic device. Preferably the semiconductor has at least 20 molar percent Cu. In a preferred embodiment, the semiconductor comprises at least 28 molar percent of Cu. In one embodiment, the semiconductor comprises a molar percentage of Cu and Bi whereby the molar percentage of Cu divided by the molar percentage of Bi is greater than 1.2. In a preferred embodiment, the semiconductor is manufactured as a thin film having a thickness less than 600 nm.

  9. Synthesis of Cu{sub 2}O from CuO thin films: Optical and electrical properties

    SciTech Connect (OSTI)

    Murali, Dhanya S. Jain, Mahaveer K.; Subrahmanyam, A.; Kumar, Shailendra; Choudhary, R. J.; Wadikar, Avinash D.

    2015-04-15

    Hole conducting, optically transparent Cu{sub 2}O thin films on glass substrates have been synthesized by vacuum annealing (5×10{sup −6} mbar at 700 K for 1 hour) of magnetron sputtered (at 300 K) CuO thin films. The Cu{sub 2}O thin films are p-type and show enhanced properties: grain size (54.7 nm), optical transmission 72% (at 600 nm) and Hall mobility 51 cm{sup 2}/Vs. The bulk and surface Valence band spectra of Cu{sub 2}O and CuO thin films are studied by temperature dependent Hall effect and Ultra violet photo electron Spectroscopy (UPS). CuO thin films show a significant band bending downwards (due to higher hole concentration) than Cu{sub 2}O thin films.

  10. Method of producing .sup.67 Cu

    DOE Patents [OSTI]

    O'Brien, Jr., Harold A.; Barnes, John W.; Taylor, Wayne A.; Thomas, Kenneth E.; Bentley, Glenn E.

    1984-01-01

    A method of producing carrier-free .sup.67 Cu by proton spallation combined with subsequent chemical separation and purification is disclosed. A target consisting essentially of pressed zinc oxide is irradiated with a high energy, high current proton beam to produce a variety of spallogenic nuclides, including .sup.67 Cu and other copper isotopes. The irradiated target is dissolved in a concentrated acid solution to which a palladium salt is added. In accordance with the preferred method, the spallogenic copper is twice coprecipitated with palladium, once with metallic zinc as the precipitating agent and once with hydrogen sulfide as the precipitating agent. The palladium/copper precipitate is then dissolved in an acid solution and the copper is separated from the palladium by liquid chromatography on an anion exchange resin.

  11. Method for producing /sup 67/Cu

    DOE Patents [OSTI]

    O'Brien, H.A. Jr.; Barnes, J.W.; Taylor, W.A.; Thomas, K.E.; Bentley, G.E.

    A method of producing carrier-free /sup 67/Cu by proton spallation combined with subsequent chemical separation and purification is disclosed. A target consisting essentially of pressed zinc oxide is irradiated with a high energy, high current proton beam to produce a variety of spallogenic nuclides, including /sup 67/Cu and other copper isotopes. The irradiated target is dissolved in a concentrated acid solution to which a palladium salt is added. In accordance with the preferred method, the spallogenic copper is twice coprecipitated with palladium, once with metallic zinc as the precipitating agent and once with hydrogen sulfide as the precipitating agent. The palladium/copper precipitate is then dissolved in an acid solution and the copper is separated from the palladium by liquid chromatography on an anion exchange resin.

  12. Fermilab Today | University of California, Davis Profile

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FOCUS: Studying the top quark and looking for new particles and phenomena, including the Higgs boson, supersymmetric particles and neutrino CP violation at the highest-energy and...

  13. DRAFT Parker-Davis Transmission System

    Broader source: Energy.gov (indexed) [DOE]

    County Approved 62013; Environmental review Construction and maintenance of a 350-MW photovoltaic solar facility, generation line, and associated facilities Reasonably...

  14. Kim Davis Lebak | National Nuclear Security Administration |...

    National Nuclear Security Administration (NNSA)

    of Energy's National Nuclear Security Administration (NNSA). ... Laboratory (LANL) management and operating contract ... and a Master's in environmental engineering from ...

  15. Energy Department Helps University of California Develop Net-Zero Campus

    Broader source: Energy.gov [DOE]

    With the help of $2.5 million in U.S. Department of Energy (DOE) funding, the University of California, Davis (UC Davis) built a net-zero community on its 130-acre West Village campus that provides housing for approximately 3,000 people in 662 apartments and 343 single-family homes.

  16. Magnetic dipole moments of {sup 57,58,59}Cu

    SciTech Connect (OSTI)

    Cocolios, T. E.; Andreyev, A. N.; Bastin, B.; Bree, N.; Buescher, J.; Elseviers, J.; Gentens, J.; Huyse, M.; Kudryavtsev, Yu.; Pauwels, D.; Bergh, P. Van den; Van Duppen, P.; Sonoda, T.

    2010-01-15

    In-gas-cell laser spectroscopy of the isotopes {sup 57,58,59,63,65}Cu has been performed at the LISOL facility using the 244.164-nm optical transition from the atomic ground state of copper. A detailed discussion on the hyperfine structure of {sup 63}Cu is presented. The magnetic dipole moments of the isotopes {sup 57,58,59,65}Cu are extracted based on that of {sup 63}Cu. The new value mu=+0.479(13)mu{sub N} is proposed for {sup 58}Cu, consistent with that of a pip{sub 3/2} x nup{sub 3/2} ground-state configuration. Spin assignments for the radioactive isotopes {sup 57,58,59}Cu are confirmed. The isotope shifts between the different isotopes are also given and discussed.

  17. Theoretical investigation of structural properties of CuCl, CuBr and CuI compounds under hydrostatic pressure

    SciTech Connect (OSTI)

    Louhibi-Fasla, S.; Djabri, H. Rekab; Achour, H.; Kefif, K.

    2013-12-16

    We have applied a recent version of the full potential linear muffin-tin orbitals method (FPLMTO) to study the structural properties of copper halides CuX (X=Cl, Br, I) under high pressure using the generalized gradient approximation (GGA) for the exchange and correlation potential by Perdew et al. Results are given for lattice parameters, bulk modulus and its first derivatives in the wurtzite(B4), zinc-blende (B3), CsCl (B2), rock-salt (B1), and PbO (B10) structures. The results of these calculations are compared with the available theoretical and experimental data.

  18. Multi-component Cu-Strengthened Steel Welding Simulations: Atom...

    Office of Scientific and Technical Information (OSTI)

    Steel Welding Simulations: Atom Probe Tomography and Synchrotron X-ray Diffraction Analyses Citation Details In-Document Search Title: Multi-component Cu-Strengthened Steel Welding ...

  19. Cu Migration in Polycrystalline CdTe Solar Cells

    SciTech Connect (OSTI)

    Guo, Da; Akis, Richard; Brinkman, Daniel; Sankin, Igor; Fang, Tian; Vasileska, Dragica; Ringhofer, Christian

    2014-03-12

    An impurity reaction-diffusion model is applied to Cu defects and related intrinsic defects in polycrystalline CdTe for a better understanding of Cu’s role in the cell level reliability of CdTe PV devices. The simulation yields transient Cu distributions in polycrystalline CdTe during solar cell processing and stressing. Preliminary results for Cu migration using available diffusivity and solubility data show that Cu accumulates near the back contact, a phenomena that is commonly observed in devices after back-contact processing or stress conditions.

  20. Understanding NOx SCR Mechanism and Activity on Cu/Chabazite...

    Office of Scientific and Technical Information (OSTI)

    Book: Understanding NOx SCR Mechanism and Activity on CuChabazite Structures throughout the Catalyst Life Cycle Citation Details In-Document Search Title: Understanding NOx SCR...

  1. Enhanced Photocatalytic Property of Cu Doped Sodium Niobate

    SciTech Connect (OSTI)

    Xu, Jianbin; Zhang, Feng; Sun, Bingyang; Du, Yingge; Li, Guoqiang; Zhang, Weifeng

    2015-09-29

    We investigate the photocatalytic activity of Cu doped NaNbO3 powder sample prepared by the modified polymer complex method. The photocatalytic activity of hydrogen evolution from methanol aqueous solution was improved by Cu 2.6 at% doping. The photocatalytic degradation of rhodamine B under visible light irradiation was enhanced in comparison with pure NaNbO3. Cu inctroduction improved the adsorption property of NaNbO3, judging from the Fourier transform infrared spectra. Moreover, the ultraviolet light excitation in Cu doped sample was found to accelerate the mineralized process.

  2. New Resolved Resonance Region Evaluation for 63Cu and 65Cu for Nuclear Criticality Safety Program

    SciTech Connect (OSTI)

    Sobes, Vladimir; Leal, Luiz C; Guber, Klaus H; Forget, Benoit; Kopecky, S.; Schillebeeckx, P.; Siegler, P.

    2014-01-01

    A new resolved resonance region evaluation of 63Cu and 65Cu was done in the energy region from 10-5 eV to 99.5 keV. The R-Matrix SAMMY method using the Reich-Moore approximation was used to create a new set of consistent resonance parameters. The new evaluation was based on three experimental transmission data sets; two measured at ORELA and one from MITR, and two radiative capture experimental data sets from GELINA. A total of 141 new resonances were identied for 63Cu and 117 for 65Cu. The corresponding set of external resonances for each isotope was based on the identied resonances above 99.5 keV from the ORELA transmission data. The negative external levels (bound levels) were determined to match the dierential thermal cross section measured at the MITR. Double dierential elastic scattering cross sections were calculated from the new set of resonance parameters. Benchmarking calculations were carried out on a set of ICSBEP benchmarks. This work is in support of the DOE Nuclear Criticality Safety Program.

  3. [Purification of {sup 67}Cu]. Progress report

    SciTech Connect (OSTI)

    DeNardo, S.J.

    1994-09-01

    This report documents progress made in several areas of research and describes results which have not yet been published. These areas include: Purification of {sup 67}Cu; Macrocyclic chelates for targeted therapy; Studies of biologic activation associated with molecular receptor increase and tumor response in ChL6/L6 protocol patients; Lym-1 single chain genetically engineered molecules; Analysis of molecular genetic coded messages to enhance tumor response; Human dosimetry and therapeutic human use radiopharmaceuticals; studies in phantoms; Quantitative SPECT; Preclinical studies; and Clinical studies.

  4. Unexpected crystal and magnetic structures in MnCu4In and MnCu4Sn

    SciTech Connect (OSTI)

    Provino, A.; Paudyal, D.; Fornasini, ML; Dhiman, I.; Dhar, SK.; Das, A.; Mudryk, Y.; Manfrinetti, P.; Pecharsky, VK

    2013-01-29

    We discovered a new compound MnCu4In with its own hexagonal structure type (hP12-P63mc, ternary ordered derivative of the hexagonal MgZn2-type) that becomes ferromagnetic at TC = 540 K. This transition temperature is higher than that found in the MnCu2In and MnCu2Sn alloys. In contrast, the homologous compound MnCu4Sn, which crystallizes in the cubic MgCu4Sn-type, orders antiferromagnetically with TN = 110 K. The neutron diffraction studies show ferromagnetic spin orientation in the {1 0 1} plane in MnCu4In with a magnetic moment of 4.5 ?B/Mn at 22 K, and a corresponding value of 4.7 ?B/Mn in the antiferromagnetic MnCu4Sn with propagation vector View the MathML source. The first-principles electronic structure calculations show that the unexpected difference in both magnetic and crystal structures of MnCu4In and MnCu4Sn is due to the difference in the Mn-3d bands and exchange interactions relating to different crystal anisotropy, coordination numbers, and interatomic distances.

  5. Non-uniform Aging on Super Duty Diesel Truck Aged Urea Cu/Zeolite...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Aging on Super Duty Diesel Truck Aged Urea CuZeolite SCR Catalysts Non-uniform Aging on Super Duty Diesel Truck Aged Urea CuZeolite SCR Catalysts CuZeolite SCR catalysts aged ...

  6. RHO-RE-ST-31 P Distribution Categories UC-25andUC-41

    Office of Scientific and Technical Information (OSTI)

    ... Dust accumulations should be less than 20 gm * Avoid ignition sources * Avoid high ... Characteristics of Titanium, Zirconium, Thorium, Uranium, and Their Hydrides, R.I. 4835, ...

  7. RHO-RE-ST-31 P Distribution Categories UC-25andUC-41

    Office of Scientific and Technical Information (OSTI)

    ... for 1,000 MW Light-Water Reactors 2 3. Zirconium Powder ... y m ) , and zirconium and sodium (10 ym) will all ... 1956). 24. A. J. Bendler, Fast Transient Heating and ...

  8. Antiferromagnetism in EuCu2As2 and EuCu1.82Sb2 single crystals

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Anand, V. K.; Johnston, D. C.

    2015-05-07

    Single crystals of EuCu2As2 and EuCu2Sb2 were grown from CuAs and CuSb self-flux, respectively. The crystallographic, magnetic, thermal, and electronic transport properties of the single crystals were investigated by room-temperature x-ray diffraction (XRD), magnetic susceptibility χ versus temperature T, isothermal magnetization M versus magnetic field H, specific heat Cp(T), and electrical resistivity ρ(T) measurements. EuCu2As2 crystallizes in the body-centered tetragonal ThCr2Si2-type structure (space group I4/mmm), whereas EuCu2Sb2 crystallizes in the related primitive tetragonal CaBe2Ge2-type structure (space group P4/nmm). The energy-dispersive x-ray spectroscopy and XRD data for the EuCu2Sb2 crystals showed the presence of vacancies on the Cu sites, yielding themore » actual composition EuCu1.82Sb2. The ρ(T) and Cp(T) data reveal metallic character for both EuCu2As2 and EuCu1.82Sb2. Antiferromagnetic (AFM) ordering is indicated from the χ(T),Cp(T), and ρ(T) data for both EuCu2As2 (TN = 17.5 K) and EuCu1.82Sb2 (TN = 5.1 K). In EuCu1.82Sb2, the ordered-state χ(T) and M(H) data suggest either a collinear A-type AFM ordering of Eu+2 spins S = 7/2 or a planar noncollinear AFM structure, with the ordered moments oriented in the tetragonal ab plane in either case. This ordered-moment orientation for the A-type AFM is consistent with calculations with magnetic dipole interactions. As a result, the anisotropic χ(T) and isothermal M(H) data for EuCu2As2, also containing Eu+2 spins S = 7/2, strongly deviate from the predictions of molecular field theory for collinear AFM ordering and the AFM structure appears to be both noncollinear and noncoplanar.« less

  9. Accelerating Fatigue Testing for Cu Ribbon Interconnects | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Accelerating Fatigue Testing for Cu Ribbon Interconnects Accelerating Fatigue Testing for Cu Ribbon Interconnects Presented at the 2013 Photovoltaic Module Reliability Workshop; 26-27 February 2013; Denver, Colorado 58369.pdf (3.59 MB) More Documents & Publications Thermal Cycling Combined with Dynamic Mechanical Load: Preliminary Report Physics of Failure of Electrical Interconnects Reliability of Electrical Interconnects

  10. Function Specific Analysis of the Thermal Durability of Cu-Zeolite...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Function Specific Analysis of the Thermal Durability of Cu-Zeolite SCR Catalyst Function Specific Analysis of the Thermal Durability of Cu-Zeolite SCR Catalyst Presentation given ...

  11. Deactivation Mechanism of Cu/Zeolite SCR Catalyst Due to Reductive...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mechanism of CuZeolite SCR Catalyst Due to Reductive Hydrothermal Aging Deactivation Mechanism of CuZeolite SCR Catalyst Due to Reductive Hydrothermal Aging Better control for ...

  12. Application of cluster-plus-glue-atom model to barrierless CuNiTi and CuNiTa films

    SciTech Connect (OSTI)

    Li, Xiaona, E-mail: lixiaona@dlut.edu.cn; Ding, Jianxin; Wang, Miao; Dong, Chuang [Key Laboratory of Materials Modification by Laser, Ion and Electron Beams (Dalian University of Technology), Ministry of Education, Dalian 116024 (China); Chu, Jinn P. [Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan (China)

    2014-11-01

    To improve the thermal stability of copper and avoid its diffusion into surrounding dielectrics or interfacial reactions with them, the authors applied the cluster-plus-glue-atom model to investigate barrierless CuNiM (M?=?Ti or Ta) seed layers. The dissolution of the third element (Ti or Ta) in the Cu lattice with the aid of Ni significantly improved the thermal stability of the Cu seed layer. The appropriate M/Ni (M?=?Ti or Ta) ratio was selected to obtain a low resistivity: the resistivity was as low as 2.5??? cm for the (Ti{sub 1.5/13.5}Ni{sub 12/13.5}){sub 0.3}Cu{sub 99.7} film and 2.8??? cm for the (Ta{sub 1.1/13.1}Ni{sub 12/13.1}){sub 0.4}Cu{sub 99.6} film after annealing at 500?C for 1?h. After annealing at 500?C for 40?h, the two films remained stable without forming a Cu{sub 3}Si compound. The authors confirmed that the range of applications of the cluster-plus-glue-atom model could be extended. Therefore, a third element M with negative enthalpies of mixing with both Cu and Ni could be selected, under the premise that the mixing enthalpy of MNi is more negative than that of MCu.

  13. How to stabilize highly active Cu+ cations in a mixed-oxide catalyst

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mudiyanselage, Kumudu; Luo, Si; Kim, Hyun You; Yang, Xiaofang; Baber, Ashleigh E.; Hoffmann, Friedrich M.; Senanayake, Sananayake; Rodriguez, Jose A.; Chen, Jingguang G.; Liu, Ping; et al

    2015-09-12

    Mixed-metal oxides exhibit novel properties that are not present in their isolated constituent metal oxides and play a significant role in heterogeneous catalysis. In this study, a titanium-copper mixed-oxide (TiCuOx) film has been synthesized on Cu(111) and characterized by complementary experimental and theoretical methods. At sub-monolayer coverages of titanium, a Cu2O-like phase coexists with TiCuOx and TiOx domains. When the mixed-oxide surface is exposed at elevated temperatures (600–650 K) to oxygen, the formation of a well-ordered TiCuOx film occurs. Stepwise oxidation of TiCuOx shows that the formation of the mixed-oxide is faster than that of pure Cu2O. As the Timore » coverage increases, Ti-rich islands (TiOx) form. The adsorption of CO has been used to probe the exposed surface sites on the TiOx–CuOx system, indicating the existence of a new Cu+ adsorption site that is not present on Cu2O/Cu(111). Adsorption of CO on Cu+ sites of TiCuOx is thermally more stable than on Cu(111), Cu2O/Cu(111) or TiO2(110). The Cu+ sites in TiCuOx domains are stable under both reducing and oxidizing conditions whereas the Cu2O domains present on sub-monolayer loads of Ti can be reduced or oxidized under mild conditions. Furthermore, the results presented here demonstrate novel properties of TiCuOx films, which are not present on Cu(111), Cu2O/Cu(111), or TiO2(110), and highlight the importance of the preparation and characterization of well-defined mixed-metal oxides in order to understand fundamental processes that could guide the design of new materials.« less

  14. Conducting mechanisms of forming-free TiW/Cu{sub 2}O/Cu memristive devices

    SciTech Connect (OSTI)

    Yan, P.; Li, Y.; Hui, Y. J.; Zhong, S. J.; Zhou, Y. X.; Xu, L.; Liu, N.; Qian, H.; Sun, H. J. Miao, X. S.

    2015-08-24

    P-type Cu{sub 2}O is a promising CMOS-compatible candidate to fabricate memristive devices for next-generation memory, logic and neuromorphic computing. In this letter, the microscopic switching and conducting mechanisms in TiW/Cu{sub 2}O/Cu memristive devices have been thoroughly investigated. The bipolar resistive switching behaviors without an electro-forming process are ascribed to the formation and rupture of the conducting filaments composed of copper vacancies. In the low resistive state, the transport of electrons in the filaments follows Mott's variable range hopping theory. When the devices switch back to high resistive state, the coexistence of Schottky emission at the Cu/Cu{sub 2}O interface and electron hopping between the residual filaments is found to dominate the conducting process. Our results will contribute to the further understanding and optimization of p-type memristive materials.

  15. Photoelectrochemistry, Electronic Structure, and Bandgap Sizes of Semiconducting Cu(I)-Niobates and Cu(I)-Tantalates

    SciTech Connect (OSTI)

    Maggard, Paul A.

    2013-11-14

    Semiconducting metal-oxides have remained of intense research interest owing to their potential for achieving efficient solar-driven photocatalytic reactions in aqueous solutions that occur as a result of their bandgap excitation. The photocatalytic reduction of water or carbon dioxide to generate hydrogen or hydrocarbon fuels, respectively, can be driven on p-type (photocathodic) electrodes with suitable band energies. However, metal-oxide semiconductors are typically difficult to dope as p-type with a high mobility of carriers. The supported research led to the discovery of new p-type Cu(I)-niobate and Cu(I)-tantalate film electrodes that can be prepared on FTO glass. New high-purity flux syntheses and the full structural determination of several Cu(I)-containing niobates and tantalates have been completed, as well as new investigations of their optical and photoelectrochemical properties and electronic structures via density-functional theory calculations. For example, CuNbO3, Cu5Ta11O30 and CuNb3O8 were prepared in high purity and their structures were characterized by both single-crystal and powder X-ray diffraction techniques. These two classes of Cu(I)-containing compounds exhibit optical bandgap sizes ranging from ~1.3 eV to ~2.6 eV. Photoelectrochemical measurements of these compounds show strong photon-driven cathodic currents that confirm the p-type semiconductor behavior of CuNbO3, CuNb3O8, and Cu5Ta11O30. Incident-photon-to-current efficiencies are measured that approach greater than ~1%. Electronic-structure calculations based on density functional theory reveal the visible-light absorption stems from a nearly-direct bandgap transition involving a copper-to-niobium or tantalum (d10 to d0) charge-transfer excitations.

  16. Structure and electrochemical properties of nanometer Cu substituted ?-nickel hydroxide

    SciTech Connect (OSTI)

    Bao, Jie; Zhu, Yanjuan; Zhang, Zhongju; Xu, Qingsheng; Zhao, Weiren; Chen, Jian; Zhang, Wei; Han, Quanyong

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ? Cu substituted ?-nickel hydroxide was prepared by ultrasonic assisted precipitation. ? The XRD peaks are anisotropic broadening. ? The electrode for 0.9 wt.% Cu has the highest capacity of 310 mAh/g at 0.2 C. -- Abstract: Nanometer Cu-substituted ?-nickel hydroxide was synthesized by means of ultrasonic-assisted precipitation. Particle size distribution (PSD) measurement, X-ray diffraction (XRD), and high-resolution transmission electron microscope (HR-TEM) were used to characterize the physical properties of the synthesized samples. The results indicate that the average particle size of the samples is about 96110 nm and the XRD diffraction peaks are anisotropic broadening. The crystal grains are mainly polycrystal structure with columnar or needle-like morphology, containing many defects. With increase of Cu content, the shape of primary particles transform from columnar to needle-like. The influences of doping amounts of Cu on the electrochemical performance were investigated through constant current charge/discharge and cyclic voltammetric measurements. The specific capacity increases initially and then decreases with increasing Cu-doping ratio, the electrode C containing 0.9 wt.% Cu shows the maximum discharge capacity of 310 mAh/g at 0.2 C, and it has the lowest charging voltage, higher discharge voltage plateau, better cycle performance and larger proton diffusion coefficient than the other electrodes.

  17. Coupled skyrmion sublattices in Cu2OSeO3

    SciTech Connect (OSTI)

    Langner, M.C.; Roy,, S.; Mishra, S. K.; Lee, J. C. T.; Shi,, X. W.; Hossain, M. A.; Chuang, Y.-D.; Seki, S.; Tokura, Y.; Kevan, S. D.; Schoenlein, R. W.

    2014-04-18

    We report the observation of a skyrmion lattice in the chiral multiferroic insulator Cu2OSeO3 using Cu L3-edge resonant soft x-ray diffraction. We observe the unexpected existence of two distinct skyrmion sub-lattices that arise from inequivalent Cu sites with chemically identical coordination numbers but different magnetically active orbitals . The skyrmion sublattices are rotated with respect to each other implying a long wavelength modulation of the lattice. The modulation vector is controlled with an applied magnetic field, associating this Moir'e-like phase with a continuous phase transition. Our findings will open a new class of science involving manipulation of quantum topological states.

  18. Manipulating Stress in Cu/low-k Dielectric Nanocomposites

    SciTech Connect (OSTI)

    C Murray; P Besser; E Ryan; J Jordan-Sweet

    2011-12-31

    The interaction of x-rays with organic dielectric materials, which alters their mechanical properties, affects values of stress generated within encapsulated Cu structures. In particular, the evolution of stress within submicron Cu interconnect structures encapsulated by an organosilicate glass can be investigated in situ using synchrotron-based x-ray diffraction. The overall geometry of the composite, along with the amount of irradiation, dictates the change in stress of the Cu features. A quantitative comparison of these findings to mechanical modeling results reveals two modes of modification within the dielectric film: a densification that changes the effective eigenstrain followed by an increase in elastic modulus.

  19. Role of Cu-Ion Doping in Cu-α-MnO2 Nanowire Electrocatalysts for the Oxygen Reduction Reaction

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Davis, Danae J.; Lambert, Timothy N.; Vigil, Julian A.; Rodriguez, Mark A.; Brumbach, Michael T.; Coker, Eric N.; Limmer, Steven J.

    2014-07-09

    The role of Cu-ion doping in α-MnO2 electrocatalysts for the oxygen reduction reaction in alkaline electrolyte was investigated. Copper doped α-MnO2 nanowires (Cu-α-MnO2) were prepared with varying amounts of Cu2+ using a solvothermal method. The electrocatalytic dataindicates that Cu-α-MnO2 nanowires have higher terminal current densities, enhanced kinetic rate constants, and improved charge transfer resistances that trend with Cu-content, exceeding values attained by α-MnO2 alone. The observed improvement in catalytic behavior correlates with an increase in Mn3+ content for the Cu-α-MnO2 nanowires. The Mn3+/Mn4+ couple is themediator for the rate-limiting redox driven O2-/OH- exchange. It is proposed that O2 adsorbs viaanmore » axial site (the eg orbital on the Mn3+ d4 ion) at the surface, or at edge defects, of the nanowireand that the increase in covalent nature of the nanowire with Cu-ion doping leads to stabilization of O2 adsorbates and faster rates of reduction. This work is applicable to other manganese oxide electrocatalysts and shows for the first time there is a correlation for manganese oxides between electrocatalytic activity for the ORR in alkaline electrolyte and an increase in Mn3+ character of the oxide.« less

  20. Crystallization of Zr2PdxCu(1-x) and Zr2NixCu(1-x) Metallic Glass

    SciTech Connect (OSTI)

    Min Xu

    2008-08-18

    One interesting aspect of rretallic glasses is the numerous instances of the deviation of the phase selection from the amorphous state to thermodynamically stable phases during the crystallization process. Their devitrification pathways allow us to study the relationship between the original amorphous structure and their crystalline counter parts. Among the various factors of phase selections, size and electronic effects have been most extensively studied. Elucidating the phase selection process of a glassy alloy will be helpful to fill in the puzzle of the changes from disordered to ordered structures. In this thesis, Two model Zr{sub 2}Pd{sub x}Cu{sub (1-x)} and Zr{sub 2}Ni{sub x}Cu{sub (1-x)} (x = 0, 0.25, 0.5, 0.75 and 1) glassy systems were investigated since: (1) All of the samples can be made into a homogenous metallic glass; (2) The atomic radii differ from Pd to Cu is by 11%, while Ni has nearly the identical atomic size compare to Cu. Moreover, Pd and Ni differ by only one valence electron from Cu. Thus, these systems are ideal to test the idea of the effects of electronic structure and size factors; (3) The small number of components in these pseudo binary systems readily lend themselves to theoretical modeling. Using high temperature X-ray diffraction {HTXRD) and thermal analysis, topological, size, electronic, bond and chemical distribution factors on crystallization selections in Zr{sub 2}Pd{sub x}Cu{sub (1-x)} and Zr{sub 2}Ni{sub x}Cu{sub (1-x)} metallic glass have been explored. All Zr{sub 2}Pd{sub x}Cu{sub (1-x)} compositions share the same Cu11b phase with different pathways of meta-stable, icosahedral quasicrystalline phase (i-phase), and C16 phase formations. The quasicrystal phase formation is topologically related to the increasing icosahedral short range order (SRO) with Pd content in Zr{sub 2}Pd{sub x}Cu{sub (1·x)} system. Meta-stable C16 phase is competitive with C11b phase at x = 0.5, which is dominated by electronic structure rather than

  1. Improving properties of Mg with AlCu additions

    SciTech Connect (OSTI)

    Rashad, Muhammad; Pan, Fusheng; Asif, Muhammad; Hussain, Shahid; Saleem, Muhammad

    2014-09-15

    The present work reports improvement in tensile properties of the Mg matrix reinforced with micron-sized copperaluminum particulate hybrids. The AlCu particulate hybrids were incorporated into the Mg matrix through powder metallurgy method. The synthesized alloys exhibited homogeneously dispersed Mg{sub 2}Cu particles in the matrix, therefore leading to a 110% increase in yield strength (221 MPa) and a 72% enhancement in ultimate tensile strength (284 MPa) by addition of 1.0 wt.%Al0.6 wt.%Cu particle hybrids. Optical microscopy, scanning election microscopy, transmission electron microscopy and X-ray diffraction were used to investigate the microstructure and intermetallic phases of the synthesized alloys. - Highlights: Mg matrix is reinforced with AlCu particulate hybrids. Powder metallurgic method is used to fabricate the alloys. Tensile strength and ductility were increased simultaneously.

  2. Arizona - Natural Gas 2014 Million Cu. Feet Percent of

    U.S. Energy Information Administration (EIA) Indexed Site

    4 Arizona - Natural Gas 2014 Million Cu. Feet Percent of National Total Million Cu. Feet Percent of National Total Total Net Movements: - Industrial: Dry Production: Vehicle Fuel: Deliveries to Consumers: Residential: Electric Power: Commercial: Total Delivered: Table S3. Summary statistics for natural gas - Arizona, 2010-2014 2010 2011 2012 2013 2014 Number of Producing Gas Wells at End of Year 5 5 5 5 5 Production (million cubic feet) Gross Withdrawals From Gas Wells 183 168 117 72 106 From

  3. Characteristics of Cu stabilized Nb3Al strands with low Cu ratio

    SciTech Connect (OSTI)

    Kikuchi, A.; Yamada, R.; Barzi, E.; Kobayashi, M.; Lamm, M.; Nakagawa, K.; Sasaki, K.; Takeuchi, T.; Turrioni, D.; Zlobin, A.V.; /NIMC, Tsukuba /Fermilab /Hitachi, Tsuchiura Works /KEK, Tsukuba

    2008-12-01

    Characteristics of recently developed F4-Nb{sub 3}Al strand with low Cu ratio are described. The overall J{sub c} of the Nb{sub 3}Al strand could be easily increased by decreasing of the Cu ratio. Although the quench of a pulse-like voltage generation is usually observed in superconducting unstable conductor, the F4 strand with a low Cu ratio of 0.61 exhibited an ordinary critical transition of gradual voltage generation. The F4 strand does not have magnetic instabilities at 4.2 K because of the tantalum interfilament matrix. The overall J{sub c} of the F4 strand achieved was 80-85% of the RRP strand. In the large mechanical stress above 100 MPa, the overall J{sub c} of the F4 strand might be comparable to that of high J{sub c} RRP-Nb{sub 3}Sn strands. The Rutherford cable with a high packing factor of 86.5% has been fabricated using F4 strands. The small racetrack magnet, SR07, was also fabricated by a 14 m F4 cable. The quench current, I{sub q}, of SR07 were obtained 22.4 kA at 4.5 K and 25.2 kA at 2.2 K. The tantalum matrix Nb{sub 3}Al strands are promising for the application of super-cooled high-field magnets as well as 4.2 K operation magnets.

  4. Cu--Pd--M hydrogen separation membranes

    DOE Patents [OSTI]

    Do{hacek over }an, Omer N; Gao, Michael C; Young, Rongxiang Hu; Tafen, De Nyago

    2013-12-17

    The disclosure provides an H2 separation membrane comprised of an allow having the composition Cu.Sub.(100-x-y)Pd.sub.xM.sub.y, where x is from about 35 to about 50 atomic percent and where y is from greater than 0 to about 20 atomic percent, and where M consists of magnesium, yttrium, aluminum, titanium, lanthanum, or combinations thereof. The M elements act as strong stabilizers for the B2 phase of the allow, and extend the critical temperature of the alloy for a given hydrogen concentration and pressure. Due to the phase stabilization and the greater temperature range over which a B2 phase can be maintained, the allow is well suited for service as a H2 separation membrane, particularly when applicable conditions are established or cycled above about 600.degree. C. over the course of expected operations. In certain embodiments, the B2 phase comprises at least 60 estimated volume percent of the allow at a steady-state temperature of 400.degree. C. The B2 phase stability is experimentally validated through HT-XRD.

  5. Modified Ni-Cu catalysts for ethanol steam reforming

    SciTech Connect (OSTI)

    Dan, M.; Mihet, M.; Almasan, V.; Borodi, G.; Katona, G.; Muresan, L.; Lazar, M. D.

    2013-11-13

    Three Ni-Cu catalysts, having different Cu content, supported on γ-alumina were synthesized by wet co-impregnation method, characterized and tested in the ethanol steam reforming (ESR) reaction. The catalysts were characterized for determination of: total surface area and porosity (N{sub 2} adsorption - desorption using BET and Dollimer Heal methods), Ni surface area (hydrogen chemisorption), crystallinity and Ni crystallites size (X-Ray Diffraction), type of catalytic active centers (Hydrogen Temperature Programmed Reduction). Total surface area and Ni crystallites size are not significantly influenced by the addition of Cu, while Ni surface area is drastically diminished by increasing of Cu concentration. Steam reforming experiments were performed at atmospheric pressure, temperature range 150-350°C, and ethanol - water molar ration of 1 at 30, using Ar as carrier gas. Ethanol conversion and hydrogen production increase by the addition of Cu. At 350°C there is a direct connection between hydrogen production and Cu concentration. Catalysts deactivation in 24h time on stream was studied by Transmission Electron Microscopy (TEM) and temperature-programmed reduction (TPR) on used catalysts. Coke deposition was observed at all studied temperatures; at 150°C amorphous carbon was evidenced, while at 350°C crystalline, filamentous carbon is formed.

  6. Comparison of plasma temperature and electron density on nanosecond laser ablation of Cu and nano-Cu

    SciTech Connect (OSTI)

    Chen, Anmin; Jiang, Yuanfei; Wang, Tingfeng; Shao, Junfeng; Jin, Mingxing

    2015-03-15

    Laser-induced breakdown spectroscopy is performed through the collection of spectra by spectral detection equipment at different delay times and distances from targets composed of Cu and nano-Cu, which are ablated using a Nd:YAG laser (532 nm, 10 ns, 10 Hz) in our experiments. The measured wavelength range is from 475 nm to 525 nm. Using the local thermodynamic equilibrium model, we analyze the characteristics of the plasma temperature and the electron number density for different distances between the target surface and the lens. The results show that when compared with the nano-Cu plasma case, the temperature of the Cu plasma is higher, while its electron number density is lower.

  7. Growth, characterization and electrochemical properties of hierarchical CuO nanostructures for supercapacitor applications

    SciTech Connect (OSTI)

    Krishnamoorthy, Karthikeyan; Kim, Sang-Jae

    2013-09-01

    Graphical abstract: - Highlights: Hierarchical CuO nanostructures were grown on Cu foil. Monoclinic phase of CuO was grown. XPS analysis revealed the presence of Cu(2p{sub 3/2}) and Cu(2p{sub 1/2}) on the surfaces. Specific capacitance of 94 F/g was achieved for the CuO using cyclic voltammetry. Impedance spectra show their pseudo capacitor applications. - Abstract: In this paper, we have investigated the electrochemical properties of hierarchical CuO nanostructures for pseudo-supercapacitor device applications. Moreover, the CuO nanostructures were formed on Cu substrate by in situ crystallization process. The as-grown CuO nanostructures were characterized using X-ray diffraction (XRD), Fourier transform-infra red spectroscopy (FT-IR), X-ray photoelectron spectroscopy and field emission-scanning electron microscope (FE-SEM) analysis. The XRD and FT-IR analysis confirm the formation of monoclinic CuO nanostructures. FE-SEM analysis shows the formation of leave like hierarchical structures of CuO with high uniformity and controlled density. The electrochemical analysis such as cyclic voltammetry and electrochemical impedance spectroscopy studies confirms the pseudo-capacitive behavior of the CuO nanostructures. Our experimental results suggest that CuO nanostructures will create promising applications of CuO toward pseudo-supercapacitors.

  8. Analysis of the structure, configuration, and sizing of Cu and Cu oxide nanoparticles generated by fs laser ablation of solid target in liquids

    SciTech Connect (OSTI)

    Santillan, J. M. J.; Videla, F. A.; Schinca, D. C.; Scaffardi, L. B.; Fernandez van Raap, M. B.

    2013-04-07

    We report on the analysis of structure, configuration, and sizing of Cu and Cu oxide nanoparticles (Nps) produced by femtosecond (fs) laser ablation of solid copper target in liquids. Laser pulse energy ranged between 500 {mu}J and 50 {mu}J. Water and acetone were used to produce the colloidal suspensions. The study was performed through optical extinction spectroscopy using Mie theory to fit the full experimental spectra, considering free and bound electrons size dependent contributions to the metal dielectric function. Raman spectroscopy and AFM technique were also used to characterize the sample. Considering the possible oxidation of copper during the fabrication process, two species (Cu and Cu{sub 2}O) arranged in two structures (bare core or core-shell) and in two configuration types (Cu-Cu{sub 2}O or Cu{sub 2}O-Cu) were considered for the fitting depending on the laser pulse energy and the surrounding media. For water at high energy, it can be observed that a Cu-Cu{sub 2}O configuration fits the experimental spectra of the colloidal suspension, while for decreasing energy and below a certain threshold, a Cu{sub 2}O-Cu configuration needs to be included for the optimum fit. Both species coexist for energies below 170 {mu}J for water. On the other hand, for acetone at high energy, optimum fit of the full spectrum suggests the presence a bimodal Cu-Cu{sub 2}O core-shell Nps distribution while for decreasing energy and below a 70 {mu}J threshold energy value, Cu{sub 2}O-Cu core-shell Nps must be included, together with the former configuration, for the fit of the full spectrum. We discuss possible reasons for the changes in the structural configuration of the core-shell Nps.

  9. Magnetic dipole moments of {sup 58}Cu and {sup 59}Cu by in-source laser spectroscopy

    SciTech Connect (OSTI)

    Stone, N. J.; Koester, U.; Stone, J. Rikovska; Fedorov, D. V.; Fedoseyev, V. N.; Flanagan, K. T.; Hass, M.; Lakshmi, S.

    2008-06-15

    Online measurements of the magnetic dipole moments and isotope shifts of {sup 58}Cu and {sup 59}Cu by the in-source laser spectroscopy method are reported. The results for the magnetic moments are {mu} ({sup 58}Cu) =+0.52(8) {mu}{sub N},{mu}({sup 59}Cu) =+1.84(3) {mu}{sub N} and for the isotope shifts {delta}{nu}{sup 59,65}=1.72(22) GHz and {delta}{nu}{sup 58,65}=1.99(30) GHz in the transition from the 3d{sup 10}4s {sup 2}S{sub 1/2} ground state to the 3d{sup 10}4p {sup 2}P{sub 1/2} state in Cu I. The magnetic moment of {sup 58}Cu is discussed in the context of the strength of the subshell closure at {sup 56}Ni, additivity rules and large-scale shell model calculations.

  10. Subcellular metal imaging identifies dynamic sites of Cu accumulation in Chlamydomonas

    SciTech Connect (OSTI)

    Hong-Hermesdorf, Anne; Miethke, Marcus; Gallaher, Sean D.; Kropat, Janette; Dodani, Sheel C.; Chan, Jefferson; Barupala, Dulmini; Domaille, Dylan W.; Shirasaki, Dyna I.; Loo, Joseph A.; Weber, Peter K.; Pett-Ridge, Jennifer; Stemmler, Timothy L.; Chang, Christopher J.; Merchant, Sabeeha S.

    2014-10-26

    Here we identified a Cu-accumulating structure with a dynamic role in intracellular Cu homeostasis. During Zn limitation, Chlamydomonas reinhardtii hyperaccumulates Cu, a process dependent on the nutritional Cu sensor CRR1, but it is functionally Cu deficient. Visualization of intracellular Cu revealed major Cu accumulation sites coincident with electron-dense structures that stained positive for low pH and polyphosphate, suggesting that they are lysosome-related organelles. Nano-secondary ion MS showed colocalization of Ca and Cu, and X-ray absorption spectroscopy was consistent with Cu+ accumulation in an ordered structure. Zn resupply restored Cu homeostasis concomitant with reduced abundance of these structures. Cu isotope labeling demonstrated that sequestered Cu+ became bioavailable for the synthesis of plastocyanin, and transcriptome profiling indicated that mobilized Cu became visible to CRR1. Cu trafficking to intracellular accumulation sites may be a strategy for preventing protein mismetallation during Zn deficiency and enabling efficient cuproprotein metallation or remetallation upon Zn resupply.

  11. Subcellular metal imaging identifies dynamic sites of Cu accumulation in Chlamydomonas

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Hong-Hermesdorf, Anne; Miethke, Marcus; Gallaher, Sean D.; Kropat, Janette; Dodani, Sheel C.; Chan, Jefferson; Barupala, Dulmini; Domaille, Dylan W.; Shirasaki, Dyna I.; Loo, Joseph A.; et al

    2014-10-26

    Here we identified a Cu-accumulating structure with a dynamic role in intracellular Cu homeostasis. During Zn limitation, Chlamydomonas reinhardtii hyperaccumulates Cu, a process dependent on the nutritional Cu sensor CRR1, but it is functionally Cu deficient. Visualization of intracellular Cu revealed major Cu accumulation sites coincident with electron-dense structures that stained positive for low pH and polyphosphate, suggesting that they are lysosome-related organelles. Nano-secondary ion MS showed colocalization of Ca and Cu, and X-ray absorption spectroscopy was consistent with Cu+ accumulation in an ordered structure. Zn resupply restored Cu homeostasis concomitant with reduced abundance of these structures. Cu isotope labelingmore » demonstrated that sequestered Cu+ became bioavailable for the synthesis of plastocyanin, and transcriptome profiling indicated that mobilized Cu became visible to CRR1. Cu trafficking to intracellular accumulation sites may be a strategy for preventing protein mismetallation during Zn deficiency and enabling efficient cuproprotein metallation or remetallation upon Zn resupply.« less

  12. Processing of R-Ba-Cu-O superconductors

    SciTech Connect (OSTI)

    Wu, H.

    1998-02-23

    Precipitation processes were developed to introduce second phases as flux pinning centers in Gd-Ba-Cu-O and Nd-Ba-Cu-O superconductors. In Gd-Ba-Cu-O, precipitation is caused by the decrease of the upper solubility limit of Gd{sub 1+x}Ba{sub 2{minus}x}Cu{sub 3}O{sub 7} solid solution (Gd123ss) in low oxygen partial pressure. Processing of supersaturated Gd{sub 1.2}Ba{sub 1.8}Cu{sub 3}O{sub 7} in low oxygen partial pressure can produce dispersed second phases. Gd211 is formed as a separate phase while extensive Gd124 type stacking fault is formed instead of a separate CuO phase. As a result of the precipitation reaction, the transition temperature and critical current density are increased. In Nd-Ba-Cu-O, precipitation is caused by the decrease of the lower solubility limit of Nd{sub 1+x}Ba{sub 2{minus}x}Cu{sub 3}O{sub 7} solid solution (Nd123ss) in oxygen. DTA results reveal the relative stability of Nd123ss in different oxygen partial pressures. In 1 bar oxygen partial pressure, Nd123ss with x = 0.1 is the most stable phase. In lower oxygen partial pressures, the most stable composition shifts towards the stoichiometric composition. The relative stability changes faster with decreasing oxygen partial pressure. Therefore, processing in oxygen and air tends to produce broad superconducting transitions but sharp transitions can be achieved in 0.01 bar and 0.001 bar oxygen partial pressures. While the lower solubility limits in 0.01 bar and 0.001 bar oxygen partial pressures remain at x = 0.00, the solubility limits in oxygen and air show a narrowing with decreasing temperature. Because of the narrowing of the solubility range in oxygen, oxygen annealing of Nd123 initially processed in low oxygen partial pressures will result in precipitation of second phases. The equilibrium second phase is BaCuO{sub 2} for temperature above 608 C, and at lower temperatures the equilibrium second phases are Ba{sub 2}CuO{sub 3.3} and Ba{sub 2}Cu{sub 3}O{sub 5+y}. However, annealing at

  13. Ab initio molecular dynamics simulations of short-range order in Zr50Cu45Al5 and Cu50Zr45Al5 metallic glasses

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Huang, Yuxiang; Huang, Li; Wang, C. Z.; Kramer, M. J.; Ho, K. M.

    2016-02-01

    In this study, comparative analysis between Zr-rich Zr50Cu45Al5 and Cu-rich Cu50Zr45Al5 metallic glasses (MGs) is extensively performed to locate the key structural motifs accounting for their difference of glass forming ability. Here we adopt ab initio molecular dynamics simulations to investigate the local atomic structures of Zr50Cu45Al5 and Cu50Zr45Al5 MGs. A high content of icosahedral-related (full and distorted) orders was found in both samples, while in the Zr-rich MG full icosahedrons <0,0,12,0> is dominant, and in the Cu-rich one the distorted icosahedral orders, especially <0,2,8,2> and <0,2,8,1>, are prominent. And the <0,2,8,2> polyhedra in Cu50Zr45Al5 MG mainly originate from Al-centeredmore » clusters, while the <0,0,12,0> in Zr50Cu45Al5 derives from both Cu-centered clusters and Al-centered clusters. These difference may be ascribed to the atomic size difference and chemical property between Cu and Zr atoms. The relatively large size of Zr and large negative heat of mixing between Zr and Al atoms, enhancing the packing density and stability of metallic glass system, may be responsible for the higher glass forming ability of Zr50Cu45Al5.« less

  14. Ab initio molecular dynamics simulations of short-range order in Zr50Cu45Al5 and Cu50Zr45Al5 metallic glasses

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Huang, Yuxiang; Huang, Li; Wang, C. Z.; Kramer, M. J.; Ho, K. M.

    2016-02-01

    Comparative analysis between Zr-rich Zr50Cu45Al5 and Cu-rich Cu50Zr45Al5 metallic glasses (MGs) is extensively performed to locate the key structural motifs accounting for their difference of glass forming ability. Here we adopt ab initio molecular dynamics simulations to investigate the local atomic structures of Zr50Cu45Al5 and Cu50Zr45Al5 MGs. A high content of icosahedral-related (full and distorted) orders was found in both samples, while in the Zr-rich MG full icosahedrons < 0,0,12,0 > is dominant, and in the Cu-rich one the distorted icosahedral orders, especially < 0,2,8,2 > and < 0,2,8,1 >, are prominent. And the < 0,2,8,2 > polyhedra in Cu50Zr45Al5more » MG mainly originate from Al-centered clusters, while the < 0,0,12,0 > in Zr50Cu45Al5 derives from both Cu-centered clusters and Al-centered clusters. These difference may be ascribed to the atomic size difference and chemical property between Cu and Zr atoms. Lastly, the relatively large size of Zr and large negative heat of mixing between Zr and Al atoms, enhancing the packing density and stability of metallic glass system, may be responsible for the higher glass forming ability of Zr50Cu45Al5.« less

  15. Thermodynamic understanding of Sn whisker growth on the Cu surface in Cu(top)-Sn(bottom) bilayer system upon room temperature aging

    SciTech Connect (OSTI)

    Huang, Lin; Jian, Wei; Lin, Bing; Wang, Jiangyong; Wen, Yuren; Gu, Lin

    2015-06-07

    Sn whiskers are observed by scanning electron microscope on the Cu surface in Cu(top)-Sn(bottom) bilayer system upon room temperature aging. Only Cu{sub 6}Sn{sub 5} phase appears in the X-ray diffraction patterns and no Sn element is detected in the Cu sublayer by scanning transmission electron microscopy. Based on the interfacial thermodynamics, the intermetallic Cu{sub 6}Sn{sub 5} compound phase may form directly at the Sn grain boundary. Driven by the stress gradient during the formation of Cu{sub 6}Sn{sub 5} compound at Sn grain boundaries, Sn atoms segregate onto the Cu surface and accumulate to form Sn whisker.

  16. Extracting Cu Diffusion Parameters in Polycrystalline CdTe

    SciTech Connect (OSTI)

    Akis, Richard; Brinkman, Daniel; Sankin, Igor; Fang, Tian; Guo, Da; Dragica, Vasileska; Ringhofer, Christian

    2014-06-13

    It is well known that Cu plays an important role in CdTe solar cell performance as a dopant. In this work, a finite-difference method is developed and used to simulate Cu diffusion in CdTe solar cells. In the simulations, which are done on a two-dimensional (2D) domain, the CdTe is assumed to be polycrystal-line, with the individual grains separated by grain boundaries. When used to fit experimental Cu concentration data, bulk and grain boundary diffusion coefficients and activation energies for CdTe can be extracted. In the past, diffusion coefficients have been typically obtained by fitting data to simple functional forms of limited validity. By doing full simulations, the simplifying assumptions used in those analytical models are avoided and diffusion parameters can thus be determined more accurately.

  17. A Window on Surface Explosions: Tartaric Acid on Cu(110)

    SciTech Connect (OSTI)

    Mhatre, B. S.; Pushkarev, V.; Holsclaw, B.; Lawton, T. J.; Sykes, E. C. H.; Gellman, A. J.

    2013-04-18

    Autocatalytic reaction mechanisms are observed in a range of important chemical processes including catalysis, radical-mediated explosions, and biosynthesis. Because of their complexity, the microscopic details of autocatalytic reaction mechanisms have been difficult to study on surfaces and heterogeneous catalysts. Autocatalytic decomposition reactions of S,S- and R,R-tartaric acid (TA) adsorbed on Cu(110) offer molecular-level insight into aspects of these processes, which until now, were largely a matter of speculation. The decomposition of TA/Cu(110) is initiated by a slow, irreversible process that forms vacancies in the adsorbed TA layer, followed by a vacancy-mediated, explosive decomposition process that yields CO{sub 2} and small hydrocarbon products. Initiation of the explosive decomposition of TA/Cu(110) has been studied by measurement of the reaction kinetics, time-resolved low energy electron diffraction (LEED), and time-resolved scanning tunneling microscopy (STM). Initiation results in a decrease in the local coverage of TA and a concomitant increase in the areal vacancy concentration. Observations of explosive TA decomposition on the Cu(651)S surface suggest that initiation does not occur at structural defects in the surface, as has been suggested in the past. Once the vacancy concentration reaches a critical value, the explosive, autocatalytic decomposition step dominates the TA decomposition rate. The onset of the explosive decomposition of TA on Cu(110) is accompanied by the extraction of Cu atoms from the surface to form a (±6,7; {-+}2,1) overlayer that is readily observable using LEED and STM. The explosive decomposition step is second-order in vacancy concentration and accelerates with increasing extent of reaction.

  18. How to stabilize highly active Cu+ cations in a mixed-oxide catalyst

    SciTech Connect (OSTI)

    Mudiyanselage, Kumudu; Luo, Si; Kim, Hyun You; Yang, Xiaofang; Baber, Ashleigh E.; Hoffmann, Friedrich M.; Senanayake, Sananayake; Rodriguez, Jose A.; Chen, Jingguang G.; Liu, Ping; Stacchiola, Dario J.

    2015-09-12

    Mixed-metal oxides exhibit novel properties that are not present in their isolated constituent metal oxides and play a significant role in heterogeneous catalysis. In this study, a titanium-copper mixed-oxide (TiCuOx) film has been synthesized on Cu(111) and characterized by complementary experimental and theoretical methods. At sub-monolayer coverages of titanium, a Cu2O-like phase coexists with TiCuOx and TiOx domains. When the mixed-oxide surface is exposed at elevated temperatures (600–650 K) to oxygen, the formation of a well-ordered TiCuOx film occurs. Stepwise oxidation of TiCuOx shows that the formation of the mixed-oxide is faster than that of pure Cu2O. As the Ti coverage increases, Ti-rich islands (TiOx) form. The adsorption of CO has been used to probe the exposed surface sites on the TiOxCuOx system, indicating the existence of a new Cu+ adsorption site that is not present on Cu2O/Cu(111). Adsorption of CO on Cu+ sites of TiCuOx is thermally more stable than on Cu(111), Cu2O/Cu(111) or TiO2(110). The Cu+ sites in TiCuOx domains are stable under both reducing and oxidizing conditions whereas the Cu2O domains present on sub-monolayer loads of Ti can be reduced or oxidized under mild conditions. Furthermore, the results presented here demonstrate novel properties of TiCuOx films, which are not present on Cu(111), Cu2O/Cu(111), or TiO2(110), and highlight the importance of the preparation and characterization of well-defined mixed-metal oxides in order to understand fundamental processes that could guide the design of new materials.

  19. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOE Patents [OSTI]

    Anderson, I.E.; Yost, F.G.; Smith, J.F.; Miller, C.M.; Terpstra, R.L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217 C and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid ``mushy`` zone) relative to the eutectic melting temperature (e.g. up to 15 C above the eutectic melting temperature). 5 figs.

  20. Pb-free Sn-Ag-Cu ternary eutectic solder

    DOE Patents [OSTI]

    Anderson, Iver E.; Yost, Frederick G.; Smith, John F.; Miller, Chad M.; Terpstra, Robert L.

    1996-06-18

    A Pb-free solder includes a ternary eutectic composition consisting essentially of about 93.6 weight % Sn-about 4.7 weight % Ag-about 1.7 weight % Cu having a eutectic melting temperature of about 217.degree. C. and variants of the ternary composition wherein the relative concentrations of Sn, Ag, and Cu deviate from the ternary eutectic composition to provide a controlled melting temperature range (liquid-solid "mushy" zone) relative to the eutectic melting temperature (e.g. up to 15.degree. C. above the eutectic melting temperature).

  1. Itinerant magnetism in metallic CuFe2Ge2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Shanavas, K. V.; Singh, David J.; He, Ruihua

    2015-03-25

    Theoretical calculations are performed to understand the electronic structure and magnetic properties of CuFe2Ge2. The band structure reveals large electron density N(EF) at the Fermi level suggesting a strong itinerant character of magnetism. The Fermi surface is dominated by two dimensional sheet like structures, with potentially strong nesting between them. The magnetic ground state appears to be ferromagnetic along a and antiferromagnetic in other directions. The results show that CuFe2Ge2 is an antiferromagnetic metal, with similarities to the Fe-based superconductors; such as magnetism with substantial itinerant character and coupling between magnetic order and electrons at the Fermi energy.

  2. Distinct oxygen hole doping in different layers of Sr₂CuO4-δ/La₂CuO₄ superlattices

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Smadici, S.; Lee, J. C. T.; Rusydi, A.; Logvenov, G.; Bozovic, I.; Abbamonte, P.

    2012-03-28

    X-ray absorption in Sr₂CuO4-δ/La₂CuO₄ (SCO/LCO) superlattices shows a variable occupation with doping of a hole state different from holes doped for x≲xoptimal in bulk La2-xSrxCuO₄ and suggests that this hole state is on apical oxygen atoms and polarized in the a-b plane. Considering the surface reflectivity gives a good qualitative description of the line shapes of resonant soft x-ray scattering. The interference between superlattice and surface reflections was used to distinguish between scatterers in the SCO and the LCO layers, with the two hole states maximized in different layers of the superlattice.

  3. Controlling superconductivity in La2-xSrxCuO4+δ by ozone and...

    Office of Scientific and Technical Information (OSTI)

    Controlling superconductivity in La2-xSrxCuO4+ by ozone and vacuum annealing Citation Details In-Document Search Title: Controlling superconductivity in La2-xSrxCuO4+ by ozone ...

  4. Deformation behavior of Nb nanowires in TiNiCu shape memory alloy...

    Office of Scientific and Technical Information (OSTI)

    in TiNiCu shape memory alloy matrix This content will become publicly available on August 18, 2016 Title: Deformation behavior of Nb nanowires in TiNiCu shape memory alloy matrix ...

  5. Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized...

    Office of Scientific and Technical Information (OSTI)

    Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized by sputter deposition Title: Solid-solution CrCoCuFeNi high-entropy alloy thin films synthesized by sputter ...

  6. Ti3CrCu4: A possible 2-D ferromagnetic spin fluctuating system...

    Office of Scientific and Technical Information (OSTI)

    Ti3CrCu4: A possible 2-D ferromagnetic spin fluctuating system Title: Ti3CrCu4: A possible ... Country of Publication: United States Language: English Word Cloud More Like This Free ...

  7. Broken Symmetry in the Pseudogap State of YBa2Cu3O6+x (Technical...

    Office of Scientific and Technical Information (OSTI)

    Technical Report: Broken Symmetry in the Pseudogap State of YBa2Cu3O6+x Citation Details In-Document Search Title: Broken Symmetry in the Pseudogap State of YBa2Cu3O6+x You are ...

  8. Classification of Lattice Defects in the Kesterite Cu2ZnSnS4...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Classification of Lattice Defects in the Kesterite Cu2ZnSnS4 and Cu2ZnSnSe4 Earth-Abundant Solar Cell Absorbers Citation Details In-Document Search Title: ...

  9. High Chalcocite Cu2S: A Solid-Liquid Hybrid Phase (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    High Chalcocite Cu2S: A Solid-Liquid Hybrid Phase Title: High Chalcocite Cu2S: A Solid-Liquid Hybrid Phase Authors: Wang, Lin-Wang Publication Date: 2012-02-24 OSTI Identifier: ...

  10. High-power Laser Interaction With Low-density C-Cu Foams (Journal...

    Office of Scientific and Technical Information (OSTI)

    High-power Laser Interaction With Low-density C-Cu Foams Citation Details In-Document Search Title: High-power Laser Interaction With Low-density C-Cu Foams You are accessing a ...

  11. Origin of Novel Diffusions of Cu and Ag in Semiconductors: The...

    Office of Scientific and Technical Information (OSTI)

    Origin of Novel Diffusions of Cu and Ag in Semiconductors: The Case of CdTe Prev Next Title: Origin of Novel Diffusions of Cu and Ag in Semiconductors: The Case of CdTe ...

  12. High strength-high conductivity Cu--Fe composites produced by powder compaction/mechanical reduction

    DOE Patents [OSTI]

    Verhoeven, John D.; Spitzig, William A.; Gibson, Edwin D.; Anderson, Iver E.

    1991-08-27

    A particulate mixture of Cu and Fe is compacted and mechanically reduced to form an "in-situ" Cu-Fe composite having high strength and high conductivity. Compaction and mechanical reduction of the particulate mixture are carried out at a temperature and time at temperature selected to avoid dissolution of Fe into the Cu matrix particulates to a harmful extent that substantially degrades the conductivity of the Cu-Fe composite.

  13. High strength-high conductivity Cu-Fe composites produced by powder compaction/mechanical reduction

    DOE Patents [OSTI]

    Verhoeven, J.D.; Spitzig, W.A.; Gibson, E.D.; Anderson, I.E.

    1991-08-27

    A particulate mixture of Cu and Fe is compacted and mechanically reduced to form an ''in-situ'' Cu-Fe composite having high strength and high conductivity. Compaction and mechanical reduction of the particulate mixture are carried out at a temperature and time at temperature selected to avoid dissolution of Fe into the Cu matrix particulates to a harmful extent that substantially degrades the conductivity of the Cu-Fe composite. 5 figures.

  14. Effects of annealing on antiwear and antibacteria behaviors of TaN-Cu nanocomposite thin films

    SciTech Connect (OSTI)

    Hsieh, J. H.; Cheng, M. K.; Chang, Y. K.; Li, C.; Chang, C. L.; Liu, P. C.

    2008-07-15

    TaN-Cu nanocomposite films were deposited by reactive cosputtering on Si and tool steel substrates. The films were then annealed using rapid thermal annealing (RTA) at 400 deg. C for 2, 4, and 8 min, respectively, to induce the nucleation and growth of Cu particles in TaN matrix and on film surface. Field emission scanning electron microscopy was applied to characterize Cu nanoparticles emerged on the surface of TaN-Cu thin films. The effects of annealing on the antiwear and antibacterial properties of these films were studied. The results reveal that annealing by RTA can cause Cu nanoparticles to form on the TaN surface. Consequently, the tribological behaviors, as well as the antibacterial behavior may vary depending on particle size, particle distribution, and total exposed Cu amount. For the samples with large Cu particles, the reduction of averaged friction and wear rate is obvious. Apparently, it is due to the smeared Cu particles adhered onto the wear tracks. This Cu layer may act as a solid lubricant. From the antibacterial testing results, it is found that both Cu particle size and total exposed Cu amount are critical in making short-term antibacterial effect. Overall, all the annealed TaN-Cu samples can reach >99% antibacterial efficiency in 24 h, with respect to uncoated Si substrate.

  15. Development of Interconnect Technologies for Particle Detectors

    SciTech Connect (OSTI)

    Tripathi, Mani

    2015-01-29

    This final report covers the three years of this grant, for the funding period 9/1/2010 - 8/31/2013. The project consisted of generic detector R&D work at UC Davis, with an emphasis on developing interconnect technologies for applications in HEP. Much of the work is done at our Facility for Interconnect Technologies (FIT) at UC Davis. FIT was established using ARRA funds, with further studies supported by this grant. Besides generic R&D work at UC Davis, FIT is engaged in providing bump bonding help to several DOE supported detector R&D efforts. Some of the developmental work was also supported by funding from other sources: continuing CMS project funds and the Linear Collider R&D funds. The latter program is now terminated. The three year program saw a good deal of progress on several fronts, which are reported here.

  16. Local structure order in Pd??Cu?Si?? liquid

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yue, G. Q.; Iowa State Univ., Ames, IA; Zhang, Y.; Sun, Y.; Shen, B.; Dong, F.; Wang, Z. Y.; Zhang, R. J.; Zheng, Y. X.; Kramer, M. J.; et al

    2015-02-05

    The short-range order (SRO) in Pd??Cu?Si?? liquid was studied by high energy x-ray diffraction and ab initio molecular dynamics (MD) simulations. The calculated pair correlation functions at different temperatures agree well with the experimental results. The partial pair correlation functions from ab intio MD simulations indicate that Si atoms prefer to be uniformly distributed while Cu atoms tend to aggregate. By performing structure analysis using Honeycutt-Andersen index, Voronoi tessellation, and atomic cluster alignment method, we show that the icosahedron and face-centered cubic SRO increase upon cooling. The dominant SRO is the Pd-centered Pd?Si? motif, namely the structure of which motifmoreis similar to the structure of Pd-centered clusters in the Pd?Si? crystal. The study further confirms the existence of trigonal prism capped with three half-octahedra that is reported as a structural unit in Pd-based amorphous alloys. The majority of Cu-centered clusters are icosahedra, suggesting that the presence of Cu is benefit to promote the glass forming ability.less

  17. Hydrogen isotope trapping in Al-Cu binary alloys

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chao, Paul; Karnesky, Richard A.

    2016-01-01

    In this study, the trapping mechanisms for hydrogen isotopes in Al–X Cu (0.0 at. % < X < 3.5 at. %) alloys were investigated using thermal desorption spectroscopy (TDS), electrical conductivity, and differential scanning calorimetry. Constant heating rate TDS was used to determine microstructural trap energies and occupancies. In addition to the trapping states in pure Al reported in the literature (interstitial lattice sites, dislocations, and vacancies), a trap site due to Al–Cu intermetallic precipitates is observed. The binding energy of this precipitate trap is (18 ± 3) kJ•mol–1 (0.19 ± 0.03 eV). Typical occupancy of this trap is high;more » for Al–2.6 at. % Cu (a Cu composition comparable to that in AA2219) charged at 200 °C with 130 MPa D2 for 68 days, there is ca. there is 3.15×10–7 mol D bound to the precipitate trap per mol of Al, accounting for a third of the D in the charged sample.« less

  18. Hydrogen isotope trapping in Al-Cu binary alloys

    SciTech Connect (OSTI)

    Chao, Paul; Karnesky, Richard A.

    2016-01-01

    In this study, the trapping mechanisms for hydrogen isotopes in Al–X Cu (0.0 at. % < X < 3.5 at. %) alloys were investigated using thermal desorption spectroscopy (TDS), electrical conductivity, and differential scanning calorimetry. Constant heating rate TDS was used to determine microstructural trap energies and occupancies. In addition to the trapping states in pure Al reported in the literature (interstitial lattice sites, dislocations, and vacancies), a trap site due to Al–Cu intermetallic precipitates is observed. The binding energy of this precipitate trap is (18 ± 3) kJ•mol–1 (0.19 ± 0.03 eV). Typical occupancy of this trap is high; for Al–2.6 at. % Cu (a Cu composition comparable to that in AA2219) charged at 200 °C with 130 MPa D2 for 68 days, there is ca. there is 3.15×10–7 mol D bound to the precipitate trap per mol of Al, accounting for a third of the D in the charged sample.

  19. An in-situ phosphorus source for the synthesis of Cu3P and the subsequent conversion to Cu3PS4 nanoparticle clusters

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sheets, Erik J.; Stach, Eric A.; Yang, Wei -Chang; Balow, Robert B.; Wang, Yunjie; Walker, Bryce C.; Agrawal, Rakesh

    2015-09-20

    The search for alternative earth abundant semiconducting nanocrystals for sustainable energy applications has brought forth the need for nanoscale syntheses beyond bulk synthesis routes. Of particular interest are metal phosphides and derivative I-V-VI chalcogenides including copper phosphide (Cu3P) and copper thiophosphate (Cu3PS4). Herein, we report a one-pot, solution-based synthesis of Cu3P nanocrystals utilizing an in-situ phosphorus source: phosphorus pentasulfide (P2S5) in trioctylphosphine (TOP). By injecting this phosphorus source into a copper solution in oleylamine (OLA), uniform and size controlled Cu3P nanocrystals with a phosphorous-rich surface are synthesized. The subsequent reaction of the Cu3P nanocrystals with decomposing thiourea forms nanoscale Cu3PS4more » particles having p-type conductivity and an effective optical band gap of 2.36 eV.« less

  20. Shock response of He bubbles in single crystal Cu

    SciTech Connect (OSTI)

    Li, B.; Wang, L.; E, J. C.; Luo, S. N.; Ma, H. H.

    2014-12-07

    With large-scale molecular dynamics simulations, we investigate shock response of He nanobubbles in single crystal Cu. For sufficient bubble size or internal pressure, a prismatic dislocation loop may form around a bubble in unshocked Cu. The internal He pressure helps to stabilize the bubble against plastic deformation. However, the prismatic dislocation loops may partially heal but facilitate nucleation of new shear and prismatic dislocation loops. For strong shocks, the internal pressure also impedes internal jetting, while a bubble assists local melting; a high speed jet breaks a He bubble into pieces dispersed among Cu. Near-surface He bubbles may burst and form high velocity ejecta containing atoms and small fragments, while the ejecta velocities do not follow the three-dimensional Maxwell-Boltzmann distributions expected for thermal equilibrium. The biggest fragment size deceases with increasing shock strength. With a decrease in ligament thickness or an increase in He bubble size, the critical shock strength required for bubble bursting decreases, while the velocity range, space extension and average velocity component along the shock direction, increase. Small bubbles are more efficient in mass ejecting. Compared to voids and perfect single crystal Cu, He bubbles have pronounced effects on shock response including bubble/void collapse, Hugoniot elastic limit (HEL), deformation mechanisms, and surface jetting. HEL is the highest for perfect single crystal Cu with the same orientations, followed by He bubbles without pre-existing prismatic dislocation loops, and then voids. Complete void collapse and shear dislocations occur for embedded voids, as opposed to partial collapse, and shear and possibly prismatic dislocations for He bubbles. He bubbles lower the threshhold shock strength for ejecta formation, and increase ejecta velocity and ejected mass.

  1. Influence of Al/CuO reactive multilayer films additives on exploding foil initiator

    SciTech Connect (OSTI)

    Zhou Xiang; Shen Ruiqi; Ye Yinghua; Zhu Peng; Hu Yan; Wu Lizhi

    2011-11-01

    An investigation on the influence of Al/CuO reactive multilayer films (RMFs) additives on exploding foil initiator was performed in this paper. Cu film and Cu/Al/CuO RMFs were produced by using standard microsystem technology and RF magnetron sputtering technology, respectively. Scanning electron microscopy characterization revealed the distinct layer structure of the as-deposited Al/CuO RMFs. Differential scanning calorimetry was employed to ascertain the amount of heat released in the thermite reaction between Al films and CuO films, which was found to be 2024 J/g. Electrical explosion tests showed that 600 V was the most matching voltage for our set of apparatus. The explosion process of two types of films was observed by high speed camera and revealed that compared with Cu film, an extra distinct combustion phenomenon was detected with large numbers of product particles fiercely ejected to a distance of about six millimeters for Cu/Al/CuO RMFs. By using the atomic emission spectroscopy double line technique, the reaction temperature was determined to be about 6000-7000 K and 8000-9000 K for Cu film and Cu/Al/CuO RMFs, respectively. The piezoelectricity of polyvinylidene fluoride film was employed to measure the average velocity of the slapper accelerated by the explosion of the films. The average velocities of the slappers were calculated to be 381 m/s and 326 m/s for Cu film and Cu/Al/CuO RMFs, respectively, and some probable reasons were discussed with a few suggestions put forward for further work.

  2. NO Chemisorption on Cu/SSZ-13: a Comparative Study from Infrared Spectroscopy and DFT Calculations

    SciTech Connect (OSTI)

    Zhang, Renqin; McEwen, Jean-Sabin; Kollar, Marton; Gao, Feng; Wang, Yilin; Szanyi, Janos; Peden, Charles HF

    2014-11-07

    The locations and energies of Cu ions in a Cu/SSZ-13 zeolite catalyst were investigated by density functional theory (DFT) calculations. For 'naked' Cu2+ ions (i.e., Cu2+ ions with no ligands in their coordination spheres other than zeolite lattice oxygen atoms), the more energetically favorable sites are within a 6-membered ring. However, with the presence of various adsorbates, the energy difference between 6- and 8-membered ring locations greatly diminishes. Specifically, Cu2+ ions are substantially stabilized by -OH ligands (as [CuII(OH)]+), making the extra-framework sites in an 8-membered ring energetically more favorable than 6-membered ring sites. Under fully dehydrated high vacuum conditions with different Si/Al and Cu/Al ratios, three chemisorbed NO species coexist upon exposure of NO to Cu/SSZ-13: NO+, Cu2+-NO and Cu+-NO. The relative signal intensities for these bands vary greatly with Si/Al ratios. The vibrational frequency of chemisorbed NO was found to be very sensitive to the location of Cu2+ ions. On the one hand, with the aid from DFT calculations, the nature for these vibrations can be assigned in detail. On the other hand, the relative intensities for various Cu2+-NO species provide a good measure of the nature of Cu2+ ions as functions of Si/Al and Cu/Al ratios and the presence of humidity. These new findings cast doubt on the generally accepted proposal that only Cu2+ ions located in 6-membered rings are catalytically active for NH3-SCR.

  3. Direct Epoxidation of Propylene over Stabilized Cu+ Surface Sites on Ti Modified Cu2O

    SciTech Connect (OSTI)

    Yang, X.; Kattel, S.; Xiong, K.; Mudiyanselage, K.; Rykov, S.; Senanayake, S. D.; Rodriguez, J. A.; Liu, P.; Stacchiola, D. J.; Chen, J. G.

    2015-07-17

    Direct propylene epoxidation by O2 is a challenging reaction because of the strong tendency for complete combustion. Results from the current study demonstrate the feasibility to tune the epoxidation selectivity by generating highly dispersed and stabilized Cu+ active sites in a TiCuOx mixed oxide. The TiCuOx surface anchors the key surface intermediate, oxametallacycle, leading to higher selectivity for epoxidation of propylene.

  4. Thermochemical and kinetic aspects of the sulfurization of Cu-Sb and Cu-Bi thin films

    SciTech Connect (OSTI)

    Colombara, Diego; Peter, Laurence M.; Rogers, Keith D.; Hutchings, Kyle

    2012-02-15

    CuSbS{sub 2} and Cu{sub 3}BiS{sub 3} are being investigated as part of a search for new absorber materials for photovoltaic devices. Thin films of these chalcogenides were produced by conversion of stacked and co-electroplated metal precursor layers in the presence of elemental sulfur vapour. Ex-situ XRD and SEM/EDS analyses of the processed samples were employed to study the reaction sequence with the aim of achieving compact layer morphologies. A new 'Time-Temperature-Reaction' (TTR) diagram and modified Pilling-Bedworth coefficients have been introduced for the description and interpretation of the reaction kinetics. For equal processing times, the minimum temperature required for CuSbS{sub 2} to appear is substantially lower than for Cu{sub 3}BiS{sub 3}, suggesting that interdiffusion across the interfaces between the binary sulfides is a key step in the formation of the ternary compounds. The effects of the heating rate and sulfur partial pressure on the phase evolution as well as the potential losses of Sb and Bi during the processes have been investigated experimentally and the results related to the equilibrium pressure diagrams obtained via thermochemical computation. - Graphical Abstract: Example of 3D plot showing the equilibrium pressure surfaces of species potentially escaping from chalcogenide films as a function of temperature and sulfur partial pressure. Bi{sub (g)}, Bi{sub 2(g)}, and BiS{sub (g)} are the gaseous species in equilibrium with solid Bi{sub 2}S{sub 3(s)} considered in this specific example. The pressure threshold plane corresponds to the pressure limit above which the elemental losses from 1 {mu}m thick films exceeds 10% of the original content per cm{sup 2} area of film and dm{sup 3} capacity of sulfurization furnace under static atmosphere conditions. The sulfurization temperature/sulfur partial pressure boundaries required to minimise the elemental losses below a given value can be easily read from the 2D projection of the

  5. Methods for producing Cu-67 radioisotope with use of a ceramic capsule for medical applications

    DOE Patents [OSTI]

    Ehst, David A.; Willit, James L.

    2016-04-12

    The present invention provides a method for producing Cu67 radioisotope suitable for use in medical applications. The method comprises irradiating a metallic zinc-68 (Zn68) target within a sealed ceramic capsule with a high energy gamma ray beam. After irradiation, the Cu67 is isolated from the Zn68 by any suitable method (e.g. chemical and or physical separation). In a preferred embodiment, the Cu67 is isolated by sublimation of the zinc in a ceramic sublimation tube to afford a copper residue containing Cu67. The Cu67 can be further purified by chemical means.

  6. Long-term leaching test of incinerator bottom ash: Evaluation of Cu partition

    SciTech Connect (OSTI)

    Lin, Cheng-Fang Wu, Chung-Hsin; Liu, Yen-Chiun

    2007-07-01

    Two types of leaching tests were performed on the bottom ash from municipal solid waste incinerators. A short-term batch test specified by the America Nuclear Society (ANS) and long-term column tests with acetic acid (pH 5.2) as leaching solution were used to evaluate copper leachability. The Cu leaching after the 5-d ANS test is about 1% of the original Cu content of 5300 mg/kg. Upon addition of a stabilizing agent, the Cu leaching quantity is reduced; the extent of reduction depends on the type of chemical used (phosphate, carbonate and sulfide). The 1.6% Na{sub 2}S addition showed negligible Cu leaching, and Na{sub 2}S was, therefore, used in subsequent column tests. The 30-d column test indicates a steady increase of Cu leaching amount with time and reaches about 1.5% of the original Cu content after 30 d. A 180-d column test further increased the Cu leaching to about 5.1% of the original Cu content, whereas no appreciable Cu leaching was found with the addition of 1.6% Na{sub 2}S. A sequential extraction was conducted on the raw ash, ash with the addition of Na{sub 2}S and the residue ash after 30 d of operation to characterize Cu affinity for different solid fractions. The data were used to evaluate the fate of Cu through these interactions.

  7. Effect of CNTs dispersion on the thermal and mechanical properties of Cu/CNTs nanocomposites

    SciTech Connect (OSTI)

    Muhsan, Ali Samer E-mail: faizahmad@petronas.com.my; Ahmad, Faiz E-mail: faizahmad@petronas.com.my; Yusoff, Puteri Sri Melor Megat Bt; Mohamed, Norani M.; Raza, M. Rafi

    2014-10-24

    Modified technique of metal injection molding (MIM) was used to fabricate multiwalled carbon nanotube (CNT) reinforced Cu nanocomposites. The effect of adding different amount of CNTs (0-10 vol.%) on the thermal and mechanical behaviour of the fabricated nanocomposites is presented. Scanning electron microscope analysis revealed homogenous dispersion of CNTs in Cu matrices at different CNTs contents. The experimentally measured thermal conductivities of Cu/CNTs nanocomposites showed extraordinary increase (76% higher than pure sintered Cu) with addition of 10 vol.% CNTs. As compared to the pure sintered Cu, increase in modulus of elasticity (Young's modulus) of Cu/CNTs nanocomposites sintered at 1050°C for 2.5 h was measured to be 48%. However, in case of 7.5 vol.% CNTs, Young's modulus was increased significantly about 51% compared to that of pure sintered Cu.

  8. Utility of reactively sputtered CuN{sub x} films in spintronics devices

    SciTech Connect (OSTI)

    Fang Yeyu; Persson, J.; Zha, C.; Willman, J.; Miller, Casey W.; Aakerman, Johan

    2012-04-01

    We have studied nitrified copper (CuN{sub x}) thin films grown by reactive sputtering in the context of spintronic devices. The Ar-to-N{sub 2} flow ratio enables tunability of the electrical resistivity and surface roughness of the CuN{sub x} films, with the former increasing to nearly 20 times that of Cu, and the latter reduced to the atomic scale. Incorporating this into a Ta/CuN{sub x}/Ta seed stack for spin valves improves the current-in-plane (CIP) magnetoresistance; maximum magnetoresistance results with CuN{sub x} seed layer and Cu interlayer. Finally, finite element modeling results are presented that suggest the use of CuN{sub x} in nanocontact spin torque oscillators can enhance current densities by limiting the current spread through the device. This may positively impact threshold currents, power requirements, and device reliability.

  9. Comparative Study of the Defect Point Physics and Luminescence of the Kesterites Cu2ZnSnS4 and Cu2ZnSnSe4 and Chalcopyrite Cu(In,Ga)Se2: Preprint

    SciTech Connect (OSTI)

    Romero, M. J.; Repins, I.; Teeter, G.; Contreras, M.; Al-Jassim, M.; Noufi, R.

    2012-08-01

    In this contribution, we present a comparative study of the luminescence of the kesterites Cu2ZnSnS4 (CZTS) and Cu2ZnSnSe4 (CZTSe) and their related chalcopyrite Cu(In,Ga)Se2 (CIGSe). Luminescence spectroscopy suggests that the electronic properties of Zn-rich, Cu-poor kesterites (both CZTS and CZTSe) and Cu-poor CIGSe are dictated by fluctuations of the electrostatic and chemical potentials. The large redshift in the luminescence of grain boundaries in CIGSe, associated with the formation of a neutral barrier is clearly observed in CZTSe, and, to some extent, in CZTS. Kesterites can therefore replicate the fundamental electronic properties of CIGSe.

  10. First Principles Simulations of the Infrared Spectrum of Liquid Water |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Argonne Leadership Computing Facility Infrared spectra of liquid water Infrared spectra of liquid water computed using hybrid (solid lines) and semi-local (dotted line) functionals, computed by ab-initio molecular dynamics with the Qbox code. Cui Zhang, UC-Davis. First Principles Simulations of the Infrared Spectrum of Liquid Water PI Name: Giulia Galli PI Email: gagalli@ucdavis.edu Institution: University of California-Davis Allocation Program: INCITE Allocation Hours at ALCF: 15 Million

  11. UNITED STATES OF AMERICA DEPARTMENT OF ENERGY OFFICE OF FOSSIL ENERGY

    Broader source: Energy.gov (indexed) [DOE]

    UC Davis Models Geospatial Station Network Design Tool & Hydrogen Infrastructure Rollout Economic Analysis Model (University of California-Davis) Objectives Analyze regional strategies for early rollout of hydrogen infrastructure in support of fuel cell vehicle commercialization. Estimate how many hydrogen fueling stations would be needed and how much it will cost to develop cost competitive hydrogen supply. Compare the cost of hydrogen from different types and sizes of hydrogen stations

  12. CX-009907: Categorical Exclusion Determination | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    907: Categorical Exclusion Determination CX-009907: Categorical Exclusion Determination UC Davis Renewable Energy Anaerobic Digester Facility CX(s) Applied: B5.20 Date: 01/31/2013 Location(s): California Offices(s): Golden Field Office The U.S. Department of Energy is proposing to provide federal funding to the University of California, Davis under the DOE's American Recovery and Reinvestment Act of 2009 Community Renewable Energy Deployment Project, to install a Renewable Energy Anaerobic

  13. Solidification behavior and structure of Al-Cu alloy welds

    SciTech Connect (OSTI)

    Brooks, J.A.; Li, M.; Yang, N.C.Y.

    1997-09-01

    The microsegregation behavior of electron beam (EB) and gas tungsten arc (GTA) welds of Al-Cu alloys covering a range from 0.19 to 7.74 wt% Cu were characterized for dendrite core concentrations and fraction eutectic solidification. Although a single weld speed of 12.7 mm/sec was used, some differences were observed in the segregation behavior of the two weld types. The microsegregation behavior was also modeled using a finite differences technique considering dendrite tip and eutectic undercooling and solid state diffusion. Fairly good agreement was observed between measured and calculated segregation behavior although differences between the two weld types could not be completely accounted for. The concept of dendrite tip undercooling was used to explain the formation of a single through thickness centerline grain in the higher alloy content GTA welds.

  14. Impedance analysis of MnCoCuO NTC ceramic

    SciTech Connect (OSTI)

    Song, S.G. . E-mail: song-ph0@wpmail.paisley.ac.uk; Ling, Z.; Placido, F.

    2005-07-12

    Impedance spectroscopy is often used to analyse the electrical properties of ceramic materials having high-resistive grain boundaries, such as ZnO and SrTiO{sub 3}. Fewer attempts have been made at using this technique for the analysis of inhomogeneous electronic ceramics consisting of grains with differing composition, such as those occurring in negative temperature coefficient (NTC) thermistors. In this study, we have attempted to adopt ac impedance spectroscopy together with other techniques to analyse an NTC thermistor ceramic material. An Mn, Co and Cu multielements transition metal oxide (MnCoCuO) ceramic was prepared by using homogeneous precipitation employing oxalic acid. This material displayed a typical NTC effect, showing an electrical resistance decrease with temperature when dc electrical measurement was performed. The ac impedance spectroscopy analysis showed that there were two peaks in impedance and conductance versus frequency plot. By using an alternative representation of impedance spectra Z'/f versus Z', three distinct relaxation frequency ranges were identified. They are believed to originate, respectively, from the electrode, phase 1 (rich-Cu phase) and phase 2 (poor-Cu phase) grains existing in this ceramic. SEM observation and EDX analysis clearly showed existence of two distinct phase grains. The resistance values were derived from phases 1 and 2 grains based on ac impedance data. The sum of the resistance values was in good agreement with that from dc measurement in the temperature range of 30-95 deg. C. The material constant, B, for the two phases was also calculated, giving 3100 and 3600 K for phases 1 and 2, respectively.

  15. Intermixing in Cu/Ni multilayers induced by cold rolling

    SciTech Connect (OSTI)

    Wang, Z.; Perepezko, J. H.; Larson, D.; Reinhard, D.

    2015-04-28

    Repeated cold rolling was performed on multilayers of Cu60/Ni40 and Cu40/Ni60 foil arrays to study the details of driven atomic scale interfacial mixing. With increasing deformation, there is a significant layer refinement down to the nm level that leads to the formation of a solid solution phase from the elemental end members. Intriguingly, the composition of the solid solution is revealed by an oscillation in the composition profile across the multilayers, which is different from the smoothly varying profile due to thermally activated diffusion. During the reaction, Cu mixed into Ni preferentially compared to Ni mixing into Cu, which is also in contrast to the thermal diffusion behavior. This is confirmed by observations from X-ray diffraction, electron energy loss spectrum and atom probe tomography. The diffusion coefficient induced by cold rolling is estimated as 1.7 × 10{sup −17} m{sup 2}/s, which cannot be attributed to any thermal effect. The effective temperature due to the deformation induced mixing is estimated as 1093 K and an intrinsic diffusivity d{sub b}, which quantifies the tendency towards equilibrium in the absence of thermal diffusion, is estimated as 6.38 × 10{sup −18} m{sup 2}/s. The fraction of the solid solution phase formed is illustrated by examining the layer thickness distribution and is described by using an error function representation. The evolution of mixing in the solid solution phase is described by a simplified sinusoid model, in which the amplitude decays with increased deformation level. The promoted diffusion coefficient could be related to the effective temperature concept, but the establishment of an oscillation in the composition profile is a characteristic behavior that develops due to deformation.

  16. CuC1 thermochemical cycle for hydrogen production

    DOE Patents [OSTI]

    Fan, Qinbai; Liu, Renxuan

    2012-01-03

    An electrochemical cell for producing copper having a dense graphite anode electrode and a dense graphite cathode electrode disposed in a CuCl solution. An anion exchange membrane made of poly(ethylene vinyl alcohol) and polyethylenimine cross-linked with a cross-linking agent selected from the group consisting of acetone, formaldehyde, glyoxal, glutaraldehyde, and mixtures thereof is disposed between the two electrodes.

  17. November 30, 2011

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    November 30, 2011 November 30, 2011 Print Monday, 21 November 2011 13:10 Wednesday, November 30 @ 12 noon, in USB 15-253 Materials with their Memories for our Memories Sabyasachi Sen, U.C. Davis; Beamline 12.2.2 Self-Assembly of Proton Conducting Block Copolymers for Solar Fuels Applications Yanika Schneider; U.C. Berkeley; Beamline 7.3.3 Seeking Enlightenment: A Next Generation Light Source at the Berkeley Lab Bob Schoenlein, Materials Sciences Division

  18. ALSNews Vol. 300

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Vol. 300 Print In This Issue Towards Heavy Fermions in Europium Intermetallic Compounds Stochastic Domain-Wall Depinning in Magnetic Nanowires ALS Gets $11.3 M in Stimulus Funds for Facility Improvements UEC Corner: Users' Meeting Workshops, Deadlines, and Elections DOE, UC Berkeley, and City of Berkeley Officials Visit Deadline for ALS Doctoral Fellowships Extended to Aug. 14 New Faces: Angel Hernandez Joins User Services Office Introducing: ALS Science Briefs Operations News Links UC Davis

  19. ALSNews Vol. 300

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Print In This Issue Towards Heavy Fermions in Europium Intermetallic Compounds Stochastic Domain-Wall Depinning in Magnetic Nanowires ALS Gets $11.3 M in Stimulus Funds for Facility Improvements UEC Corner: Users' Meeting Workshops, Deadlines, and Elections DOE, UC Berkeley, and City of Berkeley Officials Visit Deadline for ALS Doctoral Fellowships Extended to Aug. 14 New Faces: Angel Hernandez Joins User Services Office Introducing: ALS Science Briefs Operations News Links UC Davis Physicist

  20. Synthesis of BiPbSrCaCuO superconductor

    DOE Patents [OSTI]

    Hults, W.L.; Kubat-Martin, K.A.; Salazar, K.V.; Phillips, D.S.; Peterson, D.E.

    1994-04-05

    A process and a precursor composition for preparing a lead-doped bismuth-strontium-calcium-copper oxide superconductor of the formula Bi[sub a]Pb[sub b]Sr[sub c]Ca[sub d]Cu[sub e]O[sub f] wherein a is from about 1.7 to about 1.9, b is from about 0.3 to about 0.45, c is from about 1.6 to about 2.2, d is from about 1.6 to about 2.2, e is from about 2.97 to about 3.2 and f is 10[+-]z by reacting a mixture of Bi[sub 4]Sr[sub 3]Ca[sub 3]Cu[sub 4]O[sub 16[+-]z], an alkaline earth metal cuprate, e.g., Sr[sub 9]Ca[sub 5]Cu[sub 24]O[sub 41], and an alkaline earth metal plumbate, e.g., Ca[sub 2[minus]x]Sr[sub x]PbO[sub 4] wherein x is about 0.5, is disclosed.

  1. Synthesis of BiPbSrCaCuO superconductor

    DOE Patents [OSTI]

    Hults, William L.; Kubat-Martin, Kimberly A.; Salazar, Kenneth V.; Phillips, David S.; Peterson, Dean E.

    1994-01-01

    A process and a precursor composition for preparing a lead-doped bismuth-strontium-calcium-copper oxide superconductor of the formula Bi.sub.a Pb.sub.b Sr.sub.c Ca.sub.d Cu.sub.e O.sub.f wherein a is from about 1.7 to about 1.9, b is from about 0.3 to about 0.45, c is from about 1.6 to about 2.2, d is from about 1.6 to about 2.2, e is from about 2.97 to about 3.2 and f is 10.+-.z by reacting a mixture of Bi.sub.4 Sr.sub.3 Ca.sub.3 Cu.sub.4 O.sub.16.+-.z, an alkaline earth metal cuprate, e.g., Sr.sub.9 Ca.sub.5 Cu.sub.24 O.sub.41, and an alkaline earth metal plumbate, e.g., Ca.sub.2-x Sr.sub.x PbO.sub.4 wherein x is about 0.5, is disclosed.

  2. Submillimeter and microwave residual losses in epitaxial films of Y-Ba-Cu-O and Tl-Ca-Ba-Cu-O

    SciTech Connect (OSTI)

    Miller, D.; Richards, P.L.; Garrison, S.M.; Newman, N.; Eom, C.B.; Geballe, T.H.; Etemad, S.; Inam, A.; Venkatesan, T.; Martens, J.S.; Lee, W.Y.; Bourne, L.C.

    1992-03-01

    We have used a novel bolometric technique and a resonant technique to obtain accurate submillimeter and microwave residual loss data for epitaxial thin films of YBa{sub 2}Cu{sub 3}O{sub 7}, Tl{sub 2}Ca{sub 2}Ba{sub 2}Cu{sub 3}O{sub 10} and Tl{sub 2}CaBa{sub 2}Cu{sub 2}O{sub 8}. For all films we obtain good agreement between the submillimeter and microwave data, with the residual losses in both the Y-Ba-Cu-O and Tl-Ca-Ba-Cu-O films scaling approximately as frequency squared below {approximately} 1 THz. We are able to fit the losses in the Y-Ba-Cu-O films to a weakly coupled grain model for the a-b plane conductivity, in good agreement with results from a Kramers-Kronig analysis of the loss data. We observe strong phonon structure in the Tl-Ca-Ba-Cu-O films for frequencies between 2 and 21 THz, and are unable to fit these losses to the simple weakly coupled grain model. This is in strong contrast to the case for other high {Tc} superconductors such as YBa{sub 2}Cu{sub 3}O{sub 7}, where phonon structure observed in ceramic samples is absent in epitaxial oriented films and crystals because of the electronic screening due to the high conductivity of the a-b planes.

  3. Effects of Cu Diffusion from ZnTe:Cu/Ti Contacts on Carrier Lifetime of CdS/CdTe Thin Film Solar Cells: Preprint

    SciTech Connect (OSTI)

    Gessert, T. A.; Metzger, W. K.; Asher, S. E.; Young, M. R.; Johnston, S.; Dhere, R. G.; Duda, A.

    2008-05-01

    We study the performance of CdS/CdTe thin film PV devices processed with a ZnTe:Cu/Ti contact to investigate how carrier lifetime in the CdTe layer is affected by Cu diffusion from the contact.

  4. Study of Cu and Pb partitioning in mine tailings using the Tessier sequential extraction scheme

    SciTech Connect (OSTI)

    Andrei, Mariana Lucia; Senila, Marin; Hoaghia, Maria Alexandra; Levei, Erika-Andrea; Borodi, Gheorghe

    2015-12-23

    The Cu and Pb partitioning in nonferrous mine tailings was investigated using the Tessier sequential extraction scheme. The contents of Cu and Pb found in the five operationally defined fractions were determined by inductively coupled plasma optical emission spectrometry. The results showed different partitioning patterns for Cu and Pb in the studied tailings. The total Cu and Pb contents were higher in tailings from Brazesti than in those from Saliste, while the Cu contents in the first two fractions considered as mobile were comparable and the content of mobile Pb was the highest in Brazesti tailings. In the tailings from Saliste about 30% of Cu and 3% of Pb were found in exchangeable fraction, while in those from Brazesti no metals were found in the exchangeable fraction, but the percent of Cu and Pb found in the bound to carbonate fraction were high (20% and 26%, respectively). The highest Pb content was found in the residual fraction in Saliste tailings and in bound to Fe and Mn oxides fraction in Brazesti tailings, while the highest Cu content was found in the fraction bound to organic matter in Saliste tailings and in the residual fraction in Brazesti tailings. In case of tailings of Brazesti medium environmental risk was found both for Pb and Cu, while in case of Saliste tailings low risk for Pb and high risk for Cu were found.

  5. Complex catalytic behaviors of CuTiOx mixed-oxide during CO oxidation

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Kim, Hyun You; Liu, Ping

    2015-09-21

    Mixed metal oxides have attracted considerable attention in heterogeneous catalysis due to the unique stability, reactivity, and selectivity. Here, the activity and stability of the CuTiOx monolayer film supported on Cu(111), CuTiOx/Cu(111), during CO oxidation was explored using density functional theory (DFT). The unique structural frame of CuTiOx is able to stabilize and isolate a single Cu+ site on the terrace, which is previously proposed active for CO oxidation. Furthermore, it is not the case, where the reaction via both the Langmuir–Hinshelwood (LH) and the Mars-van Krevelen (M-vK) mechanisms are hindered on such single Cu+ site. Upon the formation ofmore » step-edges, the synergy among Cuδ+ sites, TiOx matrix, and Cu(111) is able to catalyze the reaction well. Depending on temperatures and partial pressure of CO and O2, the surface structure varies, which determines the dominant mechanism. In accordance with our results, the Cuδ+ ion alone does not work well for CO oxidation in the form of single sites, while the synergy among multiple active sites is necessary to facilitate the reaction.« less

  6. Systematic study of azimuthal anisotropy in Cu + Cu and Au + Au collisions at √sNN = 62.4 and 200 GeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adare, A.

    2015-09-23

    We have studied the dependence of azimuthal anisotropy v2 for inclusive and identified charged hadrons in Au+Au and Cu+Cu collisions on collision energy, species, and centrality. The values of v2 as a function of transverse momentum pT and centrality in Au+Au collisions at √sNN=200 and 62.4 GeV are the same within uncertainties. However, in Cu+Cu collisions we observe a decrease in v2 values as the collision energy is reduced from 200 to 62.4 GeV. The decrease is larger in the more peripheral collisions. By examining both Au+Au and Cu+Cu collisions we find that v2 depends both on eccentricity and themore » number of participants, Npart. We observe that v2 divided by eccentricity (ε) monotonically increases with Npart and scales as N1/3part. Thus, the Cu+Cu data at 62.4 GeV falls below the other scaled v2 data. For identified hadrons, v2 divided by the number of constituent quarks nq is independent of hadron species as a function of transverse kinetic energy KET=mT–m between 0.1T/nq<1 GeV. Combining all of the above scaling and normalizations, we observe a near-universal scaling, with the exception of the Cu+Cu data at 62.4 GeV, of v2/(nq∙ε∙N1/3part) vs KET/nq for all measured particles.« less

  7. Systematic study of azimuthal anisotropy in Cu + Cu and Au + Au collisions at √sNN = 62.4 and 200 GeV

    SciTech Connect (OSTI)

    Adare, A.

    2015-09-23

    We have studied the dependence of azimuthal anisotropy v2 for inclusive and identified charged hadrons in Au+Au and Cu+Cu collisions on collision energy, species, and centrality. The values of v2 as a function of transverse momentum pT and centrality in Au+Au collisions at √sNN=200 and 62.4 GeV are the same within uncertainties. However, in Cu+Cu collisions we observe a decrease in v2 values as the collision energy is reduced from 200 to 62.4 GeV. The decrease is larger in the more peripheral collisions. By examining both Au+Au and Cu+Cu collisions we find that v2 depends both on eccentricity and the number of participants, Npart. We observe that v2 divided by eccentricity (ε) monotonically increases with Npart and scales as N1/3part. Thus, the Cu+Cu data at 62.4 GeV falls below the other scaled v2 data. For identified hadrons, v2 divided by the number of constituent quarks nq is independent of hadron species as a function of transverse kinetic energy KET=mT–m between 0.1T/nq<1 GeV. Combining all of the above scaling and normalizations, we observe a near-universal scaling, with the exception of the Cu+Cu data at 62.4 GeV, of v2/(nq∙ε∙N1/3part) vs KET/nq for all measured particles.

  8. SANDIA REPORT SAND964839 UC-400 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    apparatus, prod- uct, or process disclosed, or represents ... may refer to in the generation of high-quality products. ... with physical design features (e.g. size and ...

  9. SANDIA REPORT SAND96-1198 UC-403 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Figure 1 Figure 2 Figure 3 Figure 4 Water vapor flux across liquid islands driven by ... 19 Predicted and measured steady-state water content profiles of the capped Simulated ...

  10. SANDIA REPORT SAND96-1197 UC-403 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Air-water vapor comparisons have also been performed, although data are not available, for ... Radial and linear air-water heat pipes involving heat, advection, capillary transport, and ...

  11. UC-70A Formerly Utilized Sites Remedial Action Program (FUSRAP...

    Office of Legacy Management (LM)

    The 1984 survey revealed site field areas with above-guideline concentrations of thorium-2... based on current cleanup guidelines for thorium-232 and radium-226, approximately 2000 m3 ...

  12. DOE/EV-0005/4 UC-70

    Office of Legacy Management (LM)

    Program Radiological Surrey of the Ashland Oil Company (Former Haist Property), Tonawanda, ... The site, now owned by Ashland Oil, Inc., occupies a corner of the total Ashland property, ...

  13. U.C. BERKELEY: NEGAWATT THE SERRANO HOUSE Project Summary

    Broader source: Energy.gov (indexed) [DOE]

    demands Project Data o LOCATION: Los Angeles, CA (Koreatown District) o CLIMATE ZONE: ASHRAE Zone 03B California Zone 09 o TOTAL AREA: 3,421 ft 2 o of BEDROOMS, BATHROOMS, and ...

  14. Distribution Category UC-38 UCRL-52863-Rev.l

    Office of Scientific and Technical Information (OSTI)

    ... 1000 0.6 200 0.79 c a l o r i z e d 100 0.26 600 0.79 500 0.26 S t e e l p l a t e , cough 40 0.94 c a l o r i z e d , oxidized 200 0.18 400 0.97 600 0.19 c a l o r i z e d , ...

  15. Distribution Category UC-38 UCRL-52863-Rev.l

    Office of Scientific and Technical Information (OSTI)

    ... with Uniform Internal Heat Generation," J. Heat Transfer, 207-210 (1970) . 91. P. J. Smith and J. Sucec, "Efficiency of Circular Fins of Triangular Profile," J. Heat Transfer, ...

  16. SAND97-8490 UC-404 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Reading Berks RG7 4PR United Kingdom Cambridge University Attn: Prof. M. F. Ashby Engineering Department Trumpington St. Cambridge CB2 1PZ United Kingdom ERG Inc. Attn: Mr. ...

  17. UC Berkley Green Jobs Calculator | Open Energy Information

    Open Energy Info (EERE)

    Energy Laboratory Phase: Create a Vision, "Evaluate Options and Determine Feasibility" is not in the list of possible values (Bring the Right People Together, Create a...

  18. SANDIA REPORT SAND952938 UC-706 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Further, they offer cost, space and weight savings, shared manufacturing and field test ... At this point, ceramic packaged parts come fiom assembly and test houses with uncertain ...

  19. SANDIA REPORT SAND96-2031 UC-742 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ......... 51 Penetration and Fracture of Aluminum ... The length that can be extruded varies with the area or size of cavity between the liner ...

  20. SAND96-2345 Distribution Unlimited Release Category UC-261

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Predicting Aerodynamic Characteristics of Typical Wind Turbine Airfoils Using CFD Walter ... predict the flow field and aerodynamic characteristics of typical wind-turbine airfoils. ...

  1. II LA-12827-M Manual UC-714 Issued: August

    Office of Scientific and Technical Information (OSTI)

    ... The default plot is a PX slice centered at (0, 0, 0) with an extent of -100 cm to 100 cm on the Y-axis and -100 cm to 100 cm on the Z-axis. Geometry errors are shown as red dotted ...

  2. Light atom quantum oscillations in UC and US (Journal Article...

    Office of Scientific and Technical Information (OSTI)

    Monte Carlo ray tracing is used to simulate the scattering, with near quantitative ... Issue: 1; Journal ID: ISSN 2469-9950 Research Org: Oak Ridge National Laboratory ...

  3. SANDIA REPORT SAND96-8243 UC-1409 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    New Mexico 871 85 and Livermore, California 94550 Issued by Sandia National ... LIVERMORE, CA 94551-0969 USA aelutz@california.sandia.gov WITH THE ASSISTANCE OF: DR. ...

  4. UCRL-53311 Distribution Category UC-41 U C R L

    Office of Scientific and Technical Information (OSTI)

    ... No. 329. 2. K. W. Lee and B. Y. H. Liu, "On the Minimum Efficiency and the Most Penetrating Particle Size for Fibrous Filters," . Air Pollution Control Assoc. 30 (4), 377 (1980). ...

  5. SANDIA REPORT SAND96-8243 UC-1409 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Rem-id Operation Using the JJRG keyword invokes a Regrid operation that is useful for ... Robert W. Vanderbilt University Box 54, Station B Nashville, Tennessee 37235 3 Glarborg, ...

  6. UC Assurance Plan For Lawrence Berkeley National Laboratory July2007

    SciTech Connect (OSTI)

    Chernowski, John

    2007-07-09

    This Division ES&H Self-Assessment Manual describes how the Laboratory administers a division self-assessment program that conforms to the institutional requirements promulgated in the 'LBNL Environment, Safety and Health Self-Assessment Program' (LBNL/PUB-5344, latest revision). The institutional program comprises all appraisal and reporting activities that identify environmental, safety, and health deficiencies and associated corrective actions. It is designed to meet U.S. Department of Energy (DOE) requirements for self-assessment. Self-assessment is a continuous process of information gathering and evaluation. A division selfassessment program should describe methods for gathering and documenting information, and methods to analyze these performance data to identify trends and root causes and their corrections.

  7. SANDIA REPORT SAND95-2049 UC-700 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... CHAPARRAL was written to reduce some of these requirements and allow as much flexibility as possible. Traditional view factor algorithms from the heat transfer field have proven to ...

  8. SANDIA REPORT SAND98-0764 UC-804 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    Packagings Historical Review Jeffrey A. Smith, Dick Salzbrenner, Ken Sorenson, Paul ... s - Historical Review - Jefiey A. Smith lntemational Nuclear Safety Department ...

  9. SANDIA REPORT SAND98-0260 UC-705 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... context, A reduces to a 3 x 3 matrix, A 1 1 -- 2 1 -- 1 2 (EQ 23) The transfer functions for the stress components were computed from Eq. (EQ 17) at each grid point in the model. ...

  10. SANDIA REPORT SAND95-2049 UC-700 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    Problems Micheal W. Glass Prepared by Sandia National Laboratories Albuquerque, New Mexico 87185 and Livermore, California 94550 for the United S t a t e s Department of Energy...

  11. SANDIA REPORT SAND951120 UC-721 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... provides few examples of bulkheads built in salt and potash mines for control of water. ... Those mining companies that have constructed bulkheads for water control purposes were ...

  12. LA-U436-M, Vol. I Manual UC-705

    Office of Scientific and Technical Information (OSTI)

    Usually the rate coefficients or cross sections are calculated from semi-empirical formulas or simple models. Sometimes a small amount of experimental data or theoretical results is ...

  13. Distribution Category UC-98 Consumption End-Use A Comparison...

    U.S. Energy Information Administration (EIA) Indexed Site

    buildings) as well as a list of large buildings in each metropolitan area. MECS is based upon a comprehensive list of manufactures that is maintained by the Census Bureau for...

  14. SANDIA REPORT SAND98-0260 UC-705 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Input to the linear system are histories of an extended force vector T where the subscripts ... ozz7 oxy, oxz, oyz consisting of the non-redundant components of the stress tensor. ...

  15. DOE/EIA-0191(99) Distribution Category UC-950

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Origin and Destination of Coal . . . . . . . . . . . . . . . ... Fossil-Fuel Data at the Electric Utility and Plant Level . . ... During 1999 several coal-fired electric plants were sold and ...

  16. SANDIA REPORT SAND94-1346 UC-721 Unlimited Release

    Office of Scientific and Technical Information (OSTI)

    ... Using the chain rule on the derivative in Equation 62, and the last line of Equation 62 ... volumes of injected fluid is a unique feature of the Jones and Roszelle method (1978). ...

  17. Oxygen-induced Y surface segregation in a CuPdY ternary alloy

    SciTech Connect (OSTI)

    Tafen, D. N.; Miller, J. B.; Dogan, O. N.; Baltrus, J. P.; Kondratyuk, P.

    2013-01-01

    We present a comprehensive theoretical and experimental study of the segregation behavior of the ternary alloy CuPdY in vacuum (i.e., the clean surface) and in the presence of oxygen. Theoretical prediction shows that for clean surface, yttrium will substitute first for Cu and then for Pd at the subsurface lattice site before segregating to the surface where it substitutes for Cu. XRD characterization of the surface of CuPdY indicates the presence of two major phases, B2 CuPd and Pd{sub 3}Y. In the presence of adsorbed oxygen, theory predicts that Y preferentially occupies surface sites due to its stronger oxygen affinity compared to Cu and Pd. XPS experiments confirm the computational results in the adsorbed oxygen case, showing that surface segregation of yttrium is induced by the formation of Y-oxides at the top-surface of the alloy.

  18. Fe and Co nanostructures embedded into the Cu(100) surface: Self-Organization and magnetic properties

    SciTech Connect (OSTI)

    Kolesnikov, S. V. Klavsyuk, A. L.; Saletsky, A. M.

    2015-10-15

    The self-organization and magnetic properties of small iron and cobalt nanostructures embedded into the first layer of a Cu(100) surface are investigated using the self-learning kinetic Monte Carlo method and density functional theory. The similarities and differences between the Fe/Cu(100) and the Co/Cu(100) are underlined. The time evolution of magnetic properties of a copper monolayer with embedded magnetic atoms at 380 K is discussed.

  19. Sulfur Effect and Performance Recovery of a DOC + CSF + Cu-Zeolite SCR

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System | Department of Energy Sulfur Effect and Performance Recovery of a DOC + CSF + Cu-Zeolite SCR System Sulfur Effect and Performance Recovery of a DOC + CSF + Cu-Zeolite SCR System effect and performance recovery studies at system level with typical diesel emission control consisting of diesel oxidation catalyst, catalyzed soot filter, and selective catalytic reduction deer11_tang.pdf (504.68 KB) More Documents & Publications Investigation of Sulfur Deactivation on Cu/Zeolite SCR

  20. Adsorbate-driven morphological changes on Cu(111) nano-pits

    SciTech Connect (OSTI)

    Mudiyanselage, K.; Xu, F.; Hoffmann, F. M.; Hrbek, J.; Waluyo, I.; Boscoboinik, J. A.; Stacchiola, D. J.

    2014-12-09

    Adsorbate-driven morphological changes of pitted-Cu(111) surfaces have been investigated following the adsorption and desorption of CO and H. The morphology of the pitted-Cu(111) surfaces, prepared by Ar+ sputtering, exposed a few atomic layers deep nested hexagonal pits of diameters from 8 to 38 nm with steep step bundles. The roughness of pitted-Cu(111) surfaces can be healed by heating to 450-500 K in vacuum. Adsorption of CO on the pitted-Cu(111) surface leads to two infrared peaks at 2089-2090 and 2101-2105 cm-1 for CO adsorbed on under-coordinated sites in addition to the peak at 2071 cm-1 for CO adsorbed on atop sites of the close-packed Cu(111) surface. CO adsorbed on under-coordinated sites is thermally more stable than that of atop Cu(111) sites. Annealing of the CO-covered surface from 100 to 300 K leads to minor changes of the surface morphology. In contrast, annealing of a H covered surface to 300 K creates a smooth Cu(111) surface as deduced from infrared data of adsorbed CO and scanning tunnelling microscopy (STM) imaging. The observation of significant adsorbate-driven morphological changes with H is attributed to its stronger modification of the Cu(111) surface by the formation of a sub-surface hydride with a hexagonal structure, which relaxes into the healed Cu(111) surface upon hydrogen desorption. These morphological changes occur ~150 K below the temperature required for healing of the pitted-Cu(111) surface by annealing in vacuum. In contrast, the adsorption of CO, which only interacts with the top-most Cu layer and desorbs by 160 K, does not significantly change the morphology of the pitted-Cu(111) surface.

  1. Adsorbate-driven morphological changes on Cu(111) nano-pits

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Mudiyanselage, K.; Xu, F.; Hoffmann, F. M.; Hrbek, J.; Waluyo, I.; Boscoboinik, J. A.; Stacchiola, D. J.

    2014-12-09

    Adsorbate-driven morphological changes of pitted-Cu(111) surfaces have been investigated following the adsorption and desorption of CO and H. The morphology of the pitted-Cu(111) surfaces, prepared by Ar+ sputtering, exposed a few atomic layers deep nested hexagonal pits of diameters from 8 to 38 nm with steep step bundles. The roughness of pitted-Cu(111) surfaces can be healed by heating to 450-500 K in vacuum. Adsorption of CO on the pitted-Cu(111) surface leads to two infrared peaks at 2089-2090 and 2101-2105 cm-1 for CO adsorbed on under-coordinated sites in addition to the peak at 2071 cm-1 for CO adsorbed on atop sitesmore » of the close-packed Cu(111) surface. CO adsorbed on under-coordinated sites is thermally more stable than that of atop Cu(111) sites. Annealing of the CO-covered surface from 100 to 300 K leads to minor changes of the surface morphology. In contrast, annealing of a H covered surface to 300 K creates a smooth Cu(111) surface as deduced from infrared data of adsorbed CO and scanning tunnelling microscopy (STM) imaging. The observation of significant adsorbate-driven morphological changes with H is attributed to its stronger modification of the Cu(111) surface by the formation of a sub-surface hydride with a hexagonal structure, which relaxes into the healed Cu(111) surface upon hydrogen desorption. These morphological changes occur ~150 K below the temperature required for healing of the pitted-Cu(111) surface by annealing in vacuum. In contrast, the adsorption of CO, which only interacts with the top-most Cu layer and desorbs by 160 K, does not significantly change the morphology of the pitted-Cu(111) surface.« less

  2. Adsorbate-driven morphological changes on Cu(111) nano-pits

    SciTech Connect (OSTI)

    Mudiyanselage, K.; Xu, F.; Hoffmann, F. M.; Hrbek, J.; Waluyo, I.; Boscoboinik, J. A.; Stacchiola, D. J.

    2015-01-01

    Adsorbate-driven morphological changes of pitted-Cu(111) surfaces have been investigated following the adsorption and desorption of CO and H. The morphology of the pitted-Cu(111) surfaces, prepared by Ar+ sputtering, exposed a few atomic layers deep nested hexagonal pits of diameters from 8 to 38 nm with steep step bundles. The roughness of pitted-Cu(111) surfaces can be healed by heating to 450-500 K in vacuum. Adsorption of CO on the pitted-Cu(111) surface leads to two infrared peaks at 2089-2090 and 2101-2105 cm-1 for CO adsorbed on under-coordinated sites in addition to the peak at 2071 cm-1 for CO adsorbed on atop sites of the close-packed Cu(111) surface. CO adsorbed on under-coordinated sites is thermally more stable than that of atop Cu(111) sites. Annealing of the CO-covered surface from 100 to 300 K leads to minor changes of the surface morphology. In contrast, annealing of a H covered surface to 300 K creates a smooth Cu(111) surface as deduced from infrared data of adsorbed CO and scanning tunnelling microscopy (STM) imaging. The observation of significant adsorbate-driven morphological changes with H is attributed to its stronger modification of the Cu(111) surface by the formation of a sub-surface hydride with a hexagonal structure, which relaxes into the healed Cu(111) surface upon hydrogen desorption. These morphological changes occur ~150 K below the temperature required for healing of the pitted-Cu(111) surface by annealing in vacuum. In contrast, the adsorption of CO, which only interacts with the top-most Cu layer and desorbs by 160 K, does not significantly change the morphology of the pitted-Cu(111) surface.

  3. Mitigation of the Impact of Pt Contamination on Cu-Zeolite SCR Catalyst

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Performance | Department of Energy Mitigation of the Impact of Pt Contamination on Cu-Zeolite SCR Catalyst Performance Mitigation of the Impact of Pt Contamination on Cu-Zeolite SCR Catalyst Performance Investigates operating conditions under which PGM elements get volatilized and transferred onto the downstream SCR catalyst, resulting in loss of NOx reduction performance deer12_chen.pdf (856.01 KB) More Documents & Publications The Effects of Hydrothermal Agingon a Commercial Cu SCR

  4. Understanding the Deactivation Mechanisms of Cu/Zeolite SCR Catalysts in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Diesel Application | Department of Energy Deactivation Mechanisms of Cu/Zeolite SCR Catalysts in Diesel Application Understanding the Deactivation Mechanisms of Cu/Zeolite SCR Catalysts in Diesel Application To understand the durability of Cu/Zeolite urea-SCR catalysts in diesel applications, the effects of engine and lab aging on catalyst reactivity and material properties were investigated. deer08_cheng.pdf (1.93 MB) More Documents & Publications Deactivation Mechanisms of Base

  5. Investigation of Sulfur Deactivation on Cu/Zeolite SCR Catalysts in Diesel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Application | Department of Energy Sulfur Deactivation on Cu/Zeolite SCR Catalysts in Diesel Application Investigation of Sulfur Deactivation on Cu/Zeolite SCR Catalysts in Diesel Application Investigation of Sulfur Deactivation on Cu/Zeolite SCR Catalysts in Diesel Application deer09_cheng.pdf (564.79 KB) More Documents & Publications Deactivation Mechanisms of Base Metal/Zeolite Urea Selective Catalytic Reduction Materials Sulfur Effect and Performance Recovery of a DOC + CSF +

  6. Method of fabricating high-efficiency Cu(In,Ga)(SeS).sub.2 thin films for solar cells

    DOE Patents [OSTI]

    Noufi, Rommel; Gabor, Andrew M.; Tuttle, John R.; Tennant, Andrew L.; Contreras, Miguel A.; Albin, David S.; Carapella, Jeffrey J.

    1995-01-01

    A process for producing a slightly Cu-poor thin film of Cu(In,Ga)(Se,S).sub.2 comprises depositing a first layer of (In,Ga).sub.x (Se,S).sub.y followed by depositing just enough Cu+(Se,S) or Cu.sub.x (Se,S) to produce the desired slightly Cu-poor material. In a variation, most, but not all, (about 90 to 99%) of the (In,Ga).sub.x (Se,S).sub.y is deposited first, followed by deposition of all the Cu+(Se,S) or Cu.sub.x (Se,S) to go near stoichiometric, possibly or even preferably slightly Cu-rich, and then in turn followed by deposition of the remainder (about 1 to 10%) of the (In,Ga).sub.x (Se,S).sub.y to end with a slightly Cu-poor composition. In yet another variation, a small portion (about 1 to 10%) of the (In,Ga).sub.x (Se,S).sub.y is first deposited as a seed layer, followed by deposition of all of the Cu+(Se,S) or Cu.sub.x (Se,S) to make a very Cu-rich mixture, and then followed deposition of the remainder of the (In,Ga).sub.x (Se,S).sub.y to go slightly Cu-poor in the final Cu(In,Ga)(Se,S).sub.2 thin film.

  7. Method of fabricating high-efficiency Cu(In,Ga)(Se,S){sub 2} thin films for solar cells

    DOE Patents [OSTI]

    Noufi, R.; Gabor, A.M.; Tuttle, J.R.; Tennant, A.L.; Contreras, M.A.; Albin, D.S.; Carapella, J.J.

    1995-08-15

    A process for producing a slightly Cu-poor thin film of Cu(In,Ga)(Se,S){sub 2} comprises depositing a first layer of (In,Ga){sub x} (Se,S){sub y} followed by depositing just enough Cu+(Se,S) or Cu{sub x} (Se,S) to produce the desired slightly Cu-poor material. In a variation, most, but not all, (about 90 to 99%) of the (In,Ga){sub x} (Se,S){sub y} is deposited first, followed by deposition of all the Cu+(Se,S) or Cu{sub x} (Se,S) to go near stoichiometric, possibly or even preferably slightly Cu-rich, and then in turn followed by deposition of the remainder (about 1 to 10%) of the (In,Ga){sub x} (Se,S){sub y} to end with a slightly Cu-poor composition. In yet another variation, a small portion (about 1 to 10%) of the (In,Ga){sub x} (Se,S){sub y} is first deposited as a seed layer, followed by deposition of all of the Cu+(Se,S) or Cu{sub x} (Se,S) to make a very Cu-rich mixture, and then followed deposition of the remainder of the (In,Ga){sub x} (Se,S){sub y} to go slightly Cu-poor in the final Cu(In,Ga)(Se,S){sub 2} thin film. 5 figs.

  8. Controlling superconductivity in La2-xSrxCuO4+δ by ozone and...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Controlling superconductivity in La2-xSrxCuO4+ by ozone and vacuum annealing Citation Details In-Document Search Title: Controlling superconductivity in ...

  9. Possibility of creating weldable alloys on the basis of the system Al-Cu-Li

    SciTech Connect (OSTI)

    Fridlyander, I.N.; Drits, A.M.; Krymova, T.V.

    1992-03-01

    The weldability of alloys of the system Al-Cu-Li is studied and promising alloying ranges are established for weldable alloys: 5.5-6.5% Cu, 0.8-1.4% Li and 2.5-3.5% Cu, 1.9-2.5% Li. The positive effect of adding small amounts of scandium on the weldability and mechanical properties of alloys of the system Al-Cu-Li is demonstrated. Properties at normal and cryogenic temperatures are given for a new weldable alloy 1460. 7 refs., 6 figs., 2 tabs.

  10. Electrical properties of single CuO nanowires for device fabrication: Diodes and field effect transistors

    SciTech Connect (OSTI)

    Florica, Camelia; Costas, Andreea; Boni, Andra Georgia; Negrea, Raluca; Preda, Nicoleta E-mail: encu@infim.ro; Pintilie, Lucian; Enculescu, Ionut E-mail: encu@infim.ro; Ion, Lucian

    2015-06-01

    High aspect ratio CuO nanowires are synthesized by a simple and scalable method, thermal oxidation in air. The structural, morphological, optical, and electrical properties of the semiconducting nanowires were studied. Au-Ti/CuO nanowire and Pt/CuO nanowire electrical contacts were investigated. A dominant Schottky mechanism was evidenced in the Au-Ti/CuO nanowire junction and an ohmic behavior was observed for the Pt/CuO nanowire junction. The Pt/CuO nanowire/Pt structure allows the measurements of the intrinsic transport properties of the single CuO nanowires. It was found that an activation mechanism describes the behavior at higher temperatures, while a nearest neighbor hopping transport mechanism is characteristic at low temperatures. This was also confirmed by four-probe resistivity measurements on the single CuO nanowires. By changing the metal/semiconductor interface, devices such as Schottky diodes and field effect transistors based on single CuO p-type nanowire semiconductor channel are obtained. These devices are suitable for being used in various electronic circuits where their size related properties can be exploited.

  11. Effects of Cr/Zn Substitutions on Dielectric Properties of CaCu...

    Office of Scientific and Technical Information (OSTI)

    Our results indicate that Cu and Ti sites play an important role in the formation of ... Country of Publication: United States Language: English Subject: 36 MATERIALS SCIENCE; ...

  12. Deactivation Mechanism of Cu/Zeolite SCR Catalyst Due to Reductive Hydrothermal Aging

    Broader source: Energy.gov [DOE]

    Better control for preventing catalyst deactivation resulted from study of and proposed mechanism for deactivation of Cu/zeolite under rich conditions.

  13. Structural, optical and ethanol sensing properties of Cu-doped SnO{sub 2} nanowires

    SciTech Connect (OSTI)

    Johari, Anima Sharma, Manish; Johari, Anoopshi; Bhatnagar, M. C.

    2014-04-24

    In present work, one-dimensional nanostructure of Cu-doped Tin oxide (SnO{sub 2}) was synthesized by using thermal evaporation method in a tubular furnace under Nitrogen (N{sub 2}) ambience. The growth was carried out at atmospheric pressure. SEM and TEM images reveal the growth of wire-like nanostructures of Cu-doped SnO{sub 2} on Si substrate. The XRD analysis confirms that the synthesized SnO{sub 2} nanowires have tetragonal rutile structure with polycrystalline nature and X-ray diffraction pattern also showed that Cu gets incorporated into the SnO{sub 2} lattice. EDX spectra confirm the doping of Cu into SnO{sub 2} nanowires and atomic fraction of Cu in nanowires is ∼ 0.5 at%. The Vapor Liquid Solid (VLS) growth mechanism for Cu-doped SnO{sub 2} nanowires was also confirmed by EDX spectra. The optical properties of as grown Cu-doped SnO{sub 2} nanowires were studied by using UV-vis spectra which concludes the band gap of about 3.7 eV. As synthesized single Cu-doped SnO{sub 2} nanowire based gas sensor exhibit relatively good performance to ethanol gas. This sensing behaviour offers a suitable application of the Cu-doped SnO{sub 2} nanowire sensor for detection of ethanol gas.

  14. Mitigation of the Impact of Pt Contamination on Cu-Zeolite SCR...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Mitigation of the Impact of Pt Contamination on Cu-Zeolite SCR Catalyst Performance Investigates operating conditions under which PGM elements get volatilized and transferred onto ...

  15. Method of forming superconducting Tl-Ba-Ca-Cu-O films

    DOE Patents [OSTI]

    Wessels, Bruce W.; Marks, Tobin J.; Richeson, Darrin S.; Tonge, Lauren M.; Zhang, Jiming

    1993-01-01

    A method of forming a superconducting Tl-Ba-Ca-Cu-O film is disclosed, which comprises depositing a Ba-Ca-Cu-O film on a substrate by MOCVD, annealing the deposited film and heat-treating the annealed film in a closed circular vessel with TlBa.sub.2 Ca.sub.2 Cu.sub.3 O.sub.x and cooling to form said superconducting film of TlO.sub.m Ba.sub.2 Ca.sub.n-1 Cu.sub.n O.sub.2n+2, wherein m=1,2 and n=1,2,3.

  16. Phase Diagram of CuCrO2 in a Magnetic Field

    SciTech Connect (OSTI)

    Fishman, Randy Scott

    2011-01-01

    The magnetic phase diagram of CuCrO2 is constructed as a function of magnetic field and anisotropy using a trial spin state built from harmonics of a fundamental ordering wavevector. Whereas the multiferroic phase of CuCrO2 is a modified spin spiral with a 3-sublattice (SL) period, the phase diagram also contains 1-SL, 2-SL, 4-SL, and 5-SL collinear states which may be accessi- ble in the nonstoichiometric compound CuCrO2+ . For small anisotropy, CuCrO2 is predicted to undergo a transition between two modified spiral states with an intervening 3-SL collinear phase.

  17. Microstructure and Corrosion Behavior of the Cu-Pd-X Ternary...

    Office of Scientific and Technical Information (OSTI)

    Microstructure and Corrosion Behavior of the Cu-Pd-X Ternary Alloys for Hydrogen Separation Membranes Citation Details In-Document Search Title: Microstructure and Corrosion...

  18. In-situ surface composition measurements of CuGaSe{sub 2} thin films

    SciTech Connect (OSTI)

    Fons, P.; Yamada, A.; Niki, S.; Oyanagi, H.

    1998-12-31

    Two CuGaSe{sub 2} films were grown by molecular beam epitaxy onto GaAs (001) substrates with varying Cu/Ga flux ratios under Se overpressure conditions. Growth was interrupted at predetermined times and the surface composition was measured using Auger electron spectroscopy after which growth was continued. After growth, the film composition was analyzed using voltage dependent electron microprobe spectroscopy. Film structure and morphology were also analyzed using x-ray diffraction and atomic force microscopy. The film with a Cu/Ga ratio larger than unity showed evidence of surface segregation of a second Cu-rich phase with a Cu/Se composition ratio slightly greater than unity. A second CuGaSe{sub 2} film with a Cu/Ga ratio of less than unity showed no change in surface composition with time and was also consistent with bulk composition measurements. Diffraction measurements indicated a high concentration of twins as well as the presence of domains with mixed c and a axes in the Ga-rich film. The Cu-rich films by contrast were single domain and had a narrower mosaics. High sensitivity scans along the [001] reciprocal axis did not exhibit any new peaks not attributable to either the substrate or the CuGaSe{sub 2} thin film.

  19. Surface segregation as a means of gettering Cu in liquid-phase-epitaxy silicon thin layers grown from Al-Cu-Si solutions

    SciTech Connect (OSTI)

    Wang, T.H.; Ciszek, T.F.; Reedy, R.; Asher, S.; King, D.

    1996-05-01

    The authors demonstrate that, by using the natural surface segregation phenomenon, Cu can be gettered to the surface from the bulk of silicon layers so that its concentrations in the liquid-phase-epitaxy (LPE) layers are much lower than its solubility at the layer growth temperature and the reported 10{sup 17} cm{sup {minus}3} degradation threshold for solar-cell performance. Secondary-ion mass spectroscopy (SIMS) analysis indicates that, within a micron-deep sub-surface region, Cu accumulates even in as-grown LPE samples. Slower cooling after growth to room temperature enhances this Cu enrichment. X-ray photoelectron spectroscopy (XPS) measurement shows as much as 3.2% Cu in a surface region of about 50 {Angstrom}. More surface-sensitive, ion-scattering spectroscopy (ISS) analysis further reveals about 7% of Cu at the top surface. These results translate to an areal gettering capacity of about 1.0 x 10{sup 16} cm{sup {minus}2}, which is higher than the available total-area density of Cu in the layer and substrate (3.6 x 10{sup 15} cm{sup {minus}2} for a uniform 1.2 x 10{sup 17}cm{sup {minus}3} Cu throughout the layer and substrate with a total thickness of 300 {mu}m).

  20. Recrystallization method to selenization of thin-film Cu(In,Ga)Se.sub.2 for semiconductor device applications

    DOE Patents [OSTI]

    Albin, David S.; Carapella, Jeffrey J.; Tuttle, John R.; Contreras, Miguel A.; Gabor, Andrew M.; Noufi, Rommel; Tennant, Andrew L.

    1995-07-25

    A process for fabricating slightly Cu-poor thin-films of Cu(In,Ga)Se.sub.2 on a substrate for semiconductor device applications includes the steps of forming initially a slightly Cu-rich, phase separated, mixture of Cu(In,Ga)Se.sub.2 :Cu.sub.x Se on the substrate in solid form followed by exposure of the Cu(In,Ga)Se.sub.2 :Cu.sub.x Se solid mixture to an overpressure of Se vapor and (In,Ga) vapor for deposition on the Cu(In,Ga)Se.sub.2 :Cu.sub.x Se solid mixture while simultaneously increasing the temperature of the solid mixture toward a recrystallization temperature (about 550.degree. C.) at which Cu(In,Ga)Se.sub.2 is solid and Cu.sub.x Se is liquid. The (In,Ga) flux is terminated while the Se overpressure flux and the recrystallization temperature are maintained to recrystallize the Cu.sub.x Se with the (In, Ga) that was deposited during the temperature transition and with the Se vapor to form the thin-film of slightly Cu-poor Cu.sub.x (In,Ga).sub.y Se.sub.z. The initial Cu-rich, phase separated large grain mixture of Cu(In,Ga)Se.sub.2 :Cu.sub.x Se can be made by sequentially depositing or co-depositing the metal precursors, Cu and (In, Ga), on the substrate at room temperature, ramping up the thin-film temperature in the presence of Se overpressure to a moderate anneal temperature (about 450.degree. C.) and holding that temperature and the Se overpressure for an annealing period. A nonselenizing, low temperature anneal at about 100.degree. C. can also be used to homogenize the precursors on the substrates before the selenizing, moderate temperature anneal.

  1. Effect of thermally stable Cu- and Mg-rich aluminides on the high temperature strength of an AlSi12CuMgNi alloy

    SciTech Connect (OSTI)

    Asghar, Z.

    2014-02-15

    The internal architecture of an AlSi12CuMgNi piston alloy, revealed by synchrotron tomography, consists of three dimensional interconnected hybrid networks of Cu-rich aluminides, Mg-rich aluminides and eutectic/primary Si embedded in an α-Al matrix. The strength at room temperature and at 300°C is studied as a function of solution treatment time at 490°C and compared with results previously reported for an AlSi12Ni alloy. The addition of 1 wt% Cu and 1 wt% Mg to AlSi12CuMgNi increases the room temperature strength by precipitation hardening while the strength at 300°C is similar for both alloys in as-cast condition. The strength of AlSi12CuMgNi decreases with solution treatment time and stabilizes at 4 h solution treatment. The effect of solution treatment time on the strength of the AlSi12CuMgNi alloy is less pronounced than for the AlSi12Ni alloy both at room temperature and at 300°C. - Highlights: • The 3D microstructure of AlSi12CuMgNi is revealed by synchrotron tomography. • An imaging analysis procedure to segment phases with similar contrasts is presented. • 1 wt% Cu and Mg results in the formation of 3D networks of rigid phases. • AlSi12CuMgNi is stronger than AlSi12Ni owing to the stability of the 3D networks.

  2. Low thermal budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks. Potential for flexible printed electronics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.; Joshi, Pooran C.

    2015-12-31

    The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditionsmore » on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.« less

  3. Low thermal budget photonic processing of highly conductive Cu interconnects based on CuO nanoinks. Potential for flexible printed electronics

    SciTech Connect (OSTI)

    Rager, Matthew S.; Aytug, Tolga; Veith, Gabriel M.; Joshi, Pooran C.

    2015-12-31

    The developing field of printed electronics nanoparticle based inks such as CuO show great promise as a low-cost alternative to other metal-based counterparts (e.g., silver). In particular, CuO inks significantly eliminate the issue of particle oxidation, before and during the sintering process, that is prevalent in Cu-based formulations. We report here the scalable and low-thermal budget photonic fabrication of Cu interconnects employing a roll-to-roll compatible pulse-thermal-processing (PTP) technique that enables phase reduction and subsequent sintering of inkjet-printed CuO patterns onto flexible polymer templates. Detailed investigations of curing and sintering conditions were performed to understand the impact of PTP system conditions on the electrical performance of the Cu patterns. Specifically, the impact of energy and power of photonic pulses on print conductivity was systematically studied by varying the following key processing parameters: pulse intensity, duration and sequence. Through optimization of such parameters, highly conductive prints in < 1 s with resistivity values as low as 100 n m has been achieved. We also observed that the introduction of an initial ink-drying step in ambient atmosphere, after the printing and before sintering, leads to significant improvements in mechanical integrity and electrical performance of the printed Cu patterns. Moreover, the viability of CuO reactive inks, coupled with the PTP technology and pre ink-drying protocols, has also been demonstrated for the additive integration of a low-cost Cu temperature sensor onto a flexible polymer substrate.

  4. La??xSrxCuO? superconductor nanowire devices

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Litombe, N. E.; Bollinger, A. T.; Hoffman, J. E.; Bozovic, I.

    2014-07-02

    La??xSrxCuO? nanowire devices have been fabricated and characterized using electrical transport measurements. Nanowires with widths down to 80 nm are patterned using high-resolution electron beam lithography. However, the narrowest nanowires show incomplete superconducting transitions with some residual resistance at T = 4 K. Here, we report on refinement of the fabrication process to achieve narrower nanowire devices with complete superconducting transitions, opening the path to the study of novel physics arising from dimension-limited superconductivity on the nanoscale.

  5. Cu-Ni-Fe anodes having improved microstructure

    DOE Patents [OSTI]

    Bergsma, S. Craig; Brown, Craig W.

    2004-04-20

    A method of producing aluminum in a low temperature electrolytic cell containing alumina dissolved in an electrolyte. The method comprises the steps of providing a molten electrolyte having alumina dissolved therein in an electrolytic cell containing the electrolyte. A non-consumable anode and cathode is disposed in the electrolyte, the anode comprised of Cu--Ni--Fe alloys having single metallurgical phase. Electric current is passed from the anode, through the electrolyte to the cathode thereby depositing aluminum on the cathode, and molten aluminum is collected from the cathode.

  6. Effect of gamma irradiation on electrical properties of Cu nanowires

    SciTech Connect (OSTI)

    Rana, Pallavi Gehlawat, Devender Chauhan, R. P.

    2014-04-24

    Metallic nanowires are of great interest due to their unique electrical, optical, chemical and magnetic properties. Characterization and explanations of electronic properties of nanowires are extremely important due to their potential applications in the field of nanoelectronics and optoelectronics. In the present study, we synthesized the copper nanowires of different diameters (80nm, 100nm and 200nm) and exposed them with gamma rays of 100 KGy and 150 KGy doses. The I-V characteristics of different diameter of Cu nanowires before and after the irradiation were recorded.

  7. Fermi surface measurements in YBa sub 2 Cu sub 3 O sub 7-x and La sub 1. 874 Sr sub. 126 CuO sub 4

    SciTech Connect (OSTI)

    Howell, R.H.; Sterne, P.A.; Solal, F.; Fluss, M.J. ); Haghighi, H.; Kaiser, J.H.; Rayner, S.L.; West, R.N. ); Liu, J.Z; Shelton, R. ); Kojima, H. ); Kitazawa, K. )

    1991-06-25

    We report new, ultra high precision measurements of the electron-positron momentum spectra of YBa{sub 2}Cu{sub 3}O{sub 7-x} and La{sub 1.874}Sr{sub 126}CuO{sub 4}. The YBCO experiments were performed on twin free, single crystals and show discontinuities with the symmetry of the Fermi surface of the CuO chain bands. Conduction band and underlying features in LSCO share the same symmetry and can only be separated with the aid of LDA calculations. 5 refs., 3 figs.

  8. Oxygen chemisorption on Cu(19 19 1) studied by spot profile analysis low-energy electron diffraction

    SciTech Connect (OSTI)

    Brandstetter, T.; Draxler, M.; Hohage, M.; Zeppenfeld, P.

    2007-12-15

    Cu(110) and the vicinal Cu(19 19 1) surfaces were characterized by recording maps of the reciprocal space by means of spot profile analysis low-energy electron diffraction (SPA-LEED). For both surfaces, kinematic simulations were performed to get insight into the main features of the experimental data. Furthermore, it is shown that chemisorption of oxygen and subsequent annealing lead to the formation of a Cu-CuO stripe phase and induce faceting of the Cu(19 19 1) surface. The evolution from the clean Cu(19 19 1) surface to the coexistence of the (110) and (111) facets with increasing oxygen exposure was characterized by SPA-LEED.

  9. Controlled preparation of Ag–Cu{sub 2}O nanocorncobs and their enhanced photocatalytic activity under visible light

    SciTech Connect (OSTI)

    Yang, Siyuan; Zhang, Shengsen; Wang, Hongjuan; Yu, Hao; Fang, Yueping; Peng, Feng

    2015-10-15

    Graphical abstract: The corncob-like Ag–Cu{sub 2}O nanostructure with suitably exposed Ag surface exhibited much higher photocatalytic activity than Ag@Cu{sub 2}O nanocables and Cu{sub 2}O nanowires. - Highlights: • Ag–Cu{sub 2}O nanocorncobs have been controllably prepared by a simple synthesis. • The possible formation mechanism of Ag–Cu{sub 2}O has been studied. • Ag–Cu{sub 2}O exhibits noticeable improved photocurrent compared with the pure Cu{sub 2}O NWs. • Ag–Cu{sub 2}O with suitably exposed Ag surface shows much higher photocatalytic activity. - Abstract: Novel corncob-like nano-heterostructured Ag–Cu{sub 2}O photocatalyst has been controllably prepared by adjusting the synthetic parameters, and the possible formation mechanism has been also studied. The photoelectrochemical and photocatalytic performances demonstrated that the as-prepared Ag–Cu{sub 2}O nanocorncobs exhibited higher photocatalytic activity than both pure Cu{sub 2}O nanowires and cable-like Ag@Cu{sub 2}O nano-composites. It was concluded that Ag–Cu{sub 2}O nanocorncobs with suitably exposed Ag surface not only effectively inhibit the recombination of electron–hole pairs but also suitably increase the active sites of electronic conduction, and thus increasing the photocatalytic activity under visible light irradiation.

  10. Man-made objects cuing in satellite imagery

    SciTech Connect (OSTI)

    Skurikhin, Alexei N

    2009-01-01

    We present a multi-scale framework for man-made structures cuing in satellite image regions. The approach is based on a hierarchical image segmentation followed by structural analysis. A hierarchical segmentation produces an image pyramid that contains a stack of irregular image partitions, represented as polygonized pixel patches, of successively reduced levels of detail (LOOs). We are jumping off from the over-segmented image represented by polygons attributed with spectral and texture information. The image is represented as a proximity graph with vertices corresponding to the polygons and edges reflecting polygon relations. This is followed by the iterative graph contraction based on Boruvka's Minimum Spanning Tree (MST) construction algorithm. The graph contractions merge the patches based on their pairwise spectral and texture differences. Concurrently with the construction of the irregular image pyramid, structural analysis is done on the agglomerated patches. Man-made object cuing is based on the analysis of shape properties of the constructed patches and their spatial relations. The presented framework can be used as pre-scanning tool for wide area monitoring to quickly guide the further analysis to regions of interest.

  11. Shock-induced consolidation and spallation of Cu nanopowders

    SciTech Connect (OSTI)

    Huang, L.; Han, W. Z.; Luo, S. N.; An, Q.; Goddard, W. A. III

    2012-01-01

    A useful synthesis technique, shock synthesis of bulk nanomaterials from nanopowders, is explored here with molecular dynamics simulations. We choose nanoporous Cu ({approx}11 nm in grain size and 6% porosity) as a representative system, and perform consolidation and spallation simulations. The spallation simulations characterize the consolidated nanopowders in terms of spall strength and damage mechanisms. The impactor is full density Cu, and the impact velocity (u{sub i}) ranges from 0.2 to 2 km s{sup -1}. We present detailed analysis of consolidation and spallation processes, including atomic-level structure and wave propagation features. The critical values of u{sub i} are identified for the onset plasticity at the contact points (0.2 km s{sup -1}) and complete void collapse (0.5 km s{sup -1}). Void collapse involves dislocations, lattice rotation, shearing/friction, heating, and microkinetic energy. Plasticity initiated at the contact points and its propagation play a key role in void collapse at low u{sub i}, while the pronounced, grain-wise deformation may contribute as well at high u{sub i}. The grain structure gives rise to nonplanar shock response at nanometer scales. Bulk nanomaterials from ultrafine nanopowders ({approx}10 nm) can be synthesized with shock waves. For spallation, grain boundary (GB) or GB triple junction damage prevails, while we also observe intragranular voids as a result of GB plasticity.

  12. J/psi production at high transverse momenta in p+p and Cu+Cu collisions at sqrt sNN = 200 GeV

    SciTech Connect (OSTI)

    STAR Collaboration; Abelev, B. I.

    2009-10-27

    The STAR collaboration at RHIC presents measurements of J/{psi} {yields} e{sup +}e{sup -} at mid-rapidity and high transverse momentum (p{sub T} > 5 GeV/c) in p+p and central Cu+Cu collisions at {radical}sNN = 200 GeV. The inclusive J/{psi} production cross section for Cu+Cu collisions is found to be consistent at high p{sub T} with the binary collision-scaled cross section for p+p collisions, in contrast to previous measurements at lower p{sub T}, where a suppression of J/{psi} production is observed relative to the expectation from binary scaling. Azimuthal correlations of J/{psi} with charged hadrons in p+p collisions provide an estimate of the contribution of B-meson decays to J/{psi} production of 13% {+-} 5%.

  13. MHK Technologies/The Davis Hydro Turbine | Open Energy Information

    Open Energy Info (EERE)

    turbine foils to move proportionately faster than the speed of the surrounding water Computer optimized cross flow design ensures that the rotation of the turbine is...

  14. Davis County, Utah: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    Utah Fruit Heights, Utah Kaysville, Utah Layton, Utah North Salt Lake, Utah South Weber, Utah Sunset, Utah Syracuse, Utah West Bountiful, Utah West Point, Utah Woods Cross,...

  15. University of California, Davis, and Mass/Central America Win...

    Energy Savers [EERE]

    ... "Most of the highly efficient designs and products on display at the U.S. Department of Energy Solar Decathlon are available today and can help anyone save money by saving energy ...

  16. EA-1982: Parker-Davis Transmission System Routine Operation and...

    Broader source: Energy.gov (indexed) [DOE]

    proposed continuation of operation and maintenance activities and implementation of a ... and at substations and maintenance facilities associated with the transmission system. ...

  17. Jefferson Davis Elec Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    Data Utility Id 9682 Utility Location Yes Ownership C NERC Location SERC NERC SERC Yes RTO SPP Yes Activity Distribution Yes This article is a stub. You can help OpenEI by...

  18. Backups Using Storage Clusters! Joshua T. A. Davies ...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cindy Valdez, Timothy Hemphill (DCS-CSD) LA-UR-14-26017 Overview * The Project * The Cluster * Software * Issues * Conclusions * Future Work http:www.dataprotection.comimages...

  19. A Desk Guide to the Davis-Bacon Act

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Request (6) Questions Referred to DOL Sec. 3-2 Payment of DBA Wages and Benefits 23 a. ... Guide 06-16-2010 e. Payment of Piecework Rates, Salaries, or Other-Than Hourly Rates 25 f. ...

  20. A DESK GUIDE TO THE DAVIS-BACON ACT

    Broader source: Energy.gov (indexed) [DOE]

    ... Request (6) Questions Referred to DOL Sec. 3-2 Payment of DBA Wages and Benefits 24 a. ... Payment of Piecework Rates, Salaries, or Other-Than Hourly Rates 26 f. Payment of DBA ...

  1. MHK Projects/Davis Island Bend | Open Energy Information

    Open Energy Info (EERE)

    32.1299, -91.0636 Project Phase Phase 1 Project Installed Capacity (MW) 0 PermitLicense Buildout (MW) 147 Device Nameplate Capacity (MW) 40 kW Number of Devices Deployed 0...

  2. Technical Sessions S. Lovejoy, A. Davis, Y. Tessier Physics Department

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    C. Gautier, D. Lavallee Earth Space Research Group University of California Santa Barbara, ... and wild statistics which require an infinite number of exponents to characterize. ...

  3. Mattson, Dunning, Howieson, Holland, Hudson, Larsen, Davis, Luke...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Luke, Cram, Seppalainen, Suyama, Boldt, Smith Page 1 of 4 Draft Advice re: Path Forward ... Luke, Cram, Seppalainen, Suyama, Boldt, Smith Page 2 of 4 Due to the delays, the Board ...

  4. Ultrasound-assisted synthesis of CuO nanostructures templated by cotton fibers

    SciTech Connect (OSTI)

    Zou, Yunling; Li, Yan; Guo, Ying; Zhou, Qingjun; An, Dongmin

    2012-11-15

    Highlights: ? Flower-like and corn-like CuO nanostructures were synthesized by a simple method. ? Cotton fibers purchased from commercially are used as template. ? The concentration of Cu(NO{sub 3}){sub 2} solution is an important parameter. -- Abstract: Flower-like and corn-like CuO nanostructures composed of CuO nanoparticles were successfully synthesized via ultrasound-assisted template method, respectively, by controlling the initial concentration of Cu(NO{sub 3}){sub 2} solution. Here, cotton fibers were used as template agent. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field-emission scanning electron microscopy (FE-SEM) and energy-dispersive spectroscopy (EDS), respectively. The results demonstrated that the initial concentration of Cu(NO{sub 3}){sub 2} solution was an important parameter for determining whether CuO nanoparticles assembled into flower-like structures or corn-like structures. The mechanism of forming different nanostructures of CuO was discussed.

  5. Development of a Low Cost Insulated Foil Substrate for Cu(InGaSe)2 Photovoltaics

    SciTech Connect (OSTI)

    ERTEN ESER

    2012-01-22

    The project validated the use of stainless steel flexible substrate coated with silicone-based resin dielectric, developed by Dow Corning Corporation, for Cu(InGa)Se2 based photovoltaics. The projects driving force was the high performance of Cu(InGa)Se2 based photovoltaics coupled with potential cost reduction that could be achieved with dielectric coated SS web substrate.

  6. Growth and magnetic property of antiperovskite manganese nitride films doped with Cu by molecular beam epitaxy

    SciTech Connect (OSTI)

    Yu, Fengmei; Ren, Lizhu; Meng, Meng; Wang, Yunjia; Yang, Mei; Wu, Shuxiang; Li, Shuwei

    2014-04-07

    Manganese nitrides thin films on MgO (100) substrates with and without Cu-doping have been fabricated by plasma assisted molecular beam epitaxy. Antiperovskite compounds Mn{sub 3.6}Cu{sub 0.4}N have been grown in the case of Cu-doping, and the pure Mn{sub 3}N{sub 2} single crystal has been obtained without Cu-doping. The Mn{sub 3.6}Cu{sub 0.4}N exhibits ferrimagnetism, and the magnetization of Mn{sub 3.6}Cu{sub 0.4}N increases upon the temperature decreasing from 300 K to 5 K, similar to Mn{sub 4}N. The exchange bias (EB) effects emerge in the Mn{sub 3.6}Cu{sub 0.4}N films. The EB behavior is originated from the interfaces between ferrimagnetic Mn{sub 3.6}Cu{sub 0.4}N and antiferromagnetic metal Mn, which is verified to be formed by the data of x-ray photoelectron spectroscopy. The present results not only provide a strategy for producing functional antiperovskite manganese nitrides, but also shed promising light on fabricating the exchange bias part of spintronic devices.

  7. Interaction of CuS and sulfur in Li-S battery system

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sun, Ke; Su, Dong; Zhang, Qing; Bock, David C.; Marschilok, Amy C.; Takeuchi, Kenneth J.; Takeuchi, Esther S.; Gan, Hong

    2015-10-27

    Lithium-Sulfur (Li-S) battery has been a subject of intensive research in recent years due to its potential to provide much higher energy density and lower cost than the current state of the art lithiumion battery technology. In this work, we have investigated Cupric Sulfide (CuS) as a capacitycontributing conductive additive to the sulfur electrode in a Li-S battery. Galvanostatic charge/discharge cycling has been used to compare the performance of both sulfur electrodes and S:CuS hybrid electrodes with various ratios. We found that the conductive CuS additive enhanced the utilization of the sulfur cathode under a 1C rate discharge. However, undermore » a C/10 discharge rate, S:CuS hybrid electrodes exhibited lower sulfur utilization in the first discharge and faster capacity decay in later cycles than a pure sulfur electrode due to the dissolution of CuS. The CuS dissolution is found to be the result of strong interaction between the soluble low order polysulfide Li2S3 and CuS. As a result, we identified the presence of conductive copper-containing sulfides at the cycled lithium anode surface, which may degrade the effectiveness of the passivation function of the solid-electrolyte-interphase (SEI) layer, accounting for the poor cycling performance of the S:CuS hybrid cells at low rate.« less

  8. Interaction of CuS and sulfur in Li-S battery system

    SciTech Connect (OSTI)

    Sun, Ke; Su, Dong; Zhang, Qing; Bock, David C.; Marschilok, Amy C.; Takeuchi, Kenneth J.; Takeuchi, Esther S.; Gan, Hong

    2015-10-27

    Lithium-Sulfur (Li-S) battery has been a subject of intensive research in recent years due to its potential to provide much higher energy density and lower cost than the current state of the art lithiumion battery technology. In this work, we have investigated Cupric Sulfide (CuS) as a capacitycontributing conductive additive to the sulfur electrode in a Li-S battery. Galvanostatic charge/discharge cycling has been used to compare the performance of both sulfur electrodes and S:CuS hybrid electrodes with various ratios. We found that the conductive CuS additive enhanced the utilization of the sulfur cathode under a 1C rate discharge. However, under a C/10 discharge rate, S:CuS hybrid electrodes exhibited lower sulfur utilization in the first discharge and faster capacity decay in later cycles than a pure sulfur electrode due to the dissolution of CuS. The CuS dissolution is found to be the result of strong interaction between the soluble low order polysulfide Li2S3 and CuS. As a result, we identified the presence of conductive copper-containing sulfides at the cycled lithium anode surface, which may degrade the effectiveness of the passivation function of the solid-electrolyte-interphase (SEI) layer, accounting for the poor cycling performance of the S:CuS hybrid cells at low rate.

  9. Ab-initio study of donor-acceptor codoping for n-type CuO

    SciTech Connect (OSTI)

    Peng, Yuan; Wang, Junling, E-mail: jlwang@ntu.edu.sg [School of Materials Science and Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798 (Singapore); Zheng, Jianwei [Institute of High Performance Computing, 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632 (Singapore); Wu, Ping [Engineering Product Development, Singapore University of Technology and Design, 20 Dover Drive, Singapore 138682 (Singapore)

    2014-10-28

    Single n-type dopant in CuO has either a deep donor level or limited solubility, inefficient in generating free electrons. We have performed ab-initio study of the donor-acceptor codoping to obtain n-type CuO. Our results show that N codoping can slightly improve the donor level of Zr and In by forming shallower n-type complexes (Zr{sub Cu}-N{sub O} and 2In{sub Cu}-N{sub O}), but their formation energies are too high to be realized in experiments. However, Li codoping with Al and Ga is found to be relatively easy to achieve. 2Al{sub Cu}-Li{sub Cu} and 2Ga{sub Cu}-Li{sub Cu} have shallower donor levels than single Al and Ga by 0.14?eV and 0.08?eV, respectively, and their formation energies are reasonably low to act as efficient codopants. Moreover, Li codoping with both Al and Ga produce an empty impurity band just below the host conduction band minimum, which may reduce the donor ionization energy at high codoping concentrations.

  10. Compositionally graded SiCu thin film anode by magnetron sputtering for lithium ion battery

    SciTech Connect (OSTI)

    Polat, B. D.; Eryilmaz, O. L.; Keles, O; Erdemir, A; Amine, Khalil

    2015-10-22

    Compositionally graded and non-graded composite SiCu thin films were deposited by magnetron sputtering technique on Cu disks for investigation of their potentials in lithium ion battery applications. The compositionally graded thin film electrodes with 30 at.% Cu delivered a 1400 mAh g-1 capacity with 80% Coulombic efficiency in the first cycle and still retained its capacity at around 600 mAh g-1 (with 99.9% Coulombic efficiency) even after 100 cycles. On the other hand, the non-graded thin film electrodes with 30 at.% Cu exhibited 1100 mAh g-1 as the first discharge capacity with 78% Coulombic efficiency but the cycle life of this film degraded very quickly, delivering only 250 mAh g-1 capacity after 100th cycles. Not only the Cu content but also the graded film thickness were believed to be the main contributors to the much superior performance of the compositionally graded SiCu films. We also believe that the Cu-rich region of the graded film helped reduce internal stress build-up and thus prevented film delamination during cycling. In particular, the decrease of Cu content from interface region to the top of the coating reduced the possibility of stress build-up across the film during cycling, thus leading to a high electrochemical performance.

  11. Preferential Cu precipitation at extended defects in bcc Fe: An atomistic study

    SciTech Connect (OSTI)

    Zhang, Yongfeng; Millett, Paul C.; Tonks, Michael R.; Bai, Xian-Ming; Biner, S. Bulent

    2015-04-01

    As a starting point to understand Cu precipitation in RPV alloys, molecular dynamics and Metropolis Monte-Carlo simulations are carried out to study the effect of lattice defects on Cu precipitation by taking Fe-Cu system as a model alloy. Molecular dynamics simulations show that owing to the high heat of mixing and positive size mismatch, Cu is attracted by vacancy type defects such as vacancies and voids, and tensile stress fields. In accordance, preferential precipitation of Cu is observed in Metropolis Monte-Carlo simulations at dislocations, prismatic loops and voids. The interaction of Cu with a stress field, e.g., that associated with a dislocation or a prismatic loop, is dominated by elastic effect and can be well described by the linear-elasticity theory. For prismatic loops, the attraction to Cu is found to be size-dependent with opposite trends displayed by vacancy and interstitial loops. The size-dependences can be explained by considering the stress fields produced by these loops. The current results will be useful for understanding the effect of neutron irradiation on Cu precipitation in reactor-pressure-vessel steels.

  12. Electronic and structural properties at the interface between CuPc and graphene

    SciTech Connect (OSTI)

    Tao, Yongsheng; Mao, Hongying; He, Pimo

    2015-01-07

    The electronic and structural properties at Copper phthalocyanine (CuPc)/graphene have been studied using ultraviolet photoemission spectroscopy and first-principles density function theory calculation. The five emission features ?, ?, ?, ?, and ? originating from the CuPc molecules locate at 1.48, 3.66, 4.98, 6.90, and 9.04?eV, respectively. These features shift in binding energy with the increasing CuPc coverage. The feature ? is mostly deriving from Cu 3d orbital with some contributions from C 2p orbital. Further theoretical calculation indicates that the adsorption of CuPc on a top site is the most favorable configuration, and the separation between the adsorbate and graphene is about 3.47?. According to the density of states before and after CuPc adsorption, the LUMO of CuPc is slightly occupied, while the Dirac point of graphene slightly shift towards higher energy, suggesting that a small amount of electron transfer from graphene to CuPc upon contact.

  13. Fundamental studies of high-temperature corrosion reactions. Sixth annual progress report. [Cu-6% Ni

    SciTech Connect (OSTI)

    Rapp, R.A.

    1981-02-01

    Research was conducted on the sulfidation of pure Mo by sulfur gases at 700 to 950/sup 0/C and on the in-situ oxidation of metals and alloys in the hot-stage SEM. Results on the in-situ oxidation of Cu, Ni, Fe, and Cu-6% Ni up to 930/sup 0/C are reported in detail. 21 figures.

  14. Measurement of K0S and K*0 in p+p, d+Au, and Cu+Cu collisions at sqrt SNN = 200 GeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adare, A.; Aidala, C.

    2014-11-01

    The PHENIX experiment at the Relativistic Heavy Ion Collider has performed a systematic study of K0S and K*0 meson production at midrapidity in p+p, d+Au, and Cu+Cu collisions at sqrt SNN = 200 GeV. The K0S and K*0 mesons are reconstructed via their K0S and π0(→γγ)π0 (→γγ) and K*0 → K ±#25;π± decay modes, respectively. The measured transverse-momentum spectra are used to determine the nuclear modification factor of K0S and K*0 mesons in d+Au and Cu+Cu collisions at different centralities. In the d+Au collisions, the nuclear modification factor of K0S and K*0 mesons is almost constant as a function ofmore »transverse momentum and is consistent with unity showing that cold-nuclear-matter effects do not play a significant role in the measured kinematic range. In Cu+Cu collisions, within the uncertainties no nuclear modification is registered in peripheral collisions. In central collisions, both mesons show suppression relative to the expectations from the p+p yield scaled by the number of binary nucleon-nucleon collisions in the Cu+Cu system. In the pT range 2–5 GeV/c, the strange mesons ( K0S, K*0) similarly to the #30;Φ meson with hidden strangeness, show an intermediate suppression between the more suppressed light quark mesons (π0) and the nonsuppressed baryons (p, p-bar). At higher transverse momentum, pT > 5 GeV/c, production of all particles is similarly suppressed by a factor of ≈2. (auth)« less

  15. Measurement of K0S and K*0 in p+p, d+Au, and Cu+Cu collisions at sqrt SNN = 200 GeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Adare, A.; Aidala, C.

    2014-11-01

    The PHENIX experiment at the Relativistic Heavy Ion Collider has performed a systematic study of K0S and K*0 meson production at midrapidity in p+p, d+Au, and Cu+Cu collisions at sqrt SNN = 200 GeV. The K0S and K*0 mesons are reconstructed via their K0S and π0(→γγ)π0 (→γγ) and K*0 → K ± π± decay modes, respectively. The measured transverse-momentum spectra are used to determine the nuclear modification factor of K0S and K*0 mesons in d+Au and Cu+Cu collisions at different centralities. In the d+Au collisions, the nuclear modification factor of K0S and K*0 mesons is almost constant as a functionmore » of transverse momentum and is consistent with unity showing that cold-nuclear-matter effects do not play a significant role in the measured kinematic range. In Cu+Cu collisions, within the uncertainties no nuclear modification is registered in peripheral collisions. In central collisions, both mesons show suppression relative to the expectations from the p+p yield scaled by the number of binary nucleon-nucleon collisions in the Cu+Cu system. In the pT range 2–5 GeV/c, the strange mesons ( K0S, K*0) similarly to the Φ meson with hidden strangeness, show an intermediate suppression between the more suppressed light quark mesons (π0) and the nonsuppressed baryons (p, p-bar). At higher transverse momentum, pT > 5 GeV/c, production of all particles is similarly suppressed by a factor of ≈2. (auth)« less

  16. Metallicity of Ca2Cu6P5 with single and double copper-pnictide layers

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Li, Li; Parker, David; Chi, Miaofang; Tsoi, Georgiy M.; Vohra, Yogesh K.; Sefat, Athena S.

    2016-02-16

    Here, we report thermodynamic and transport properties, and also theoretical calculations, for Cu-based compound Ca2Cu6P5 and compare with CaCu2-dP2. Both materials have layers of edge-sharing copper pnictide tetrahedral CuP4, similar to Fe–As and Fe–Se layers (with FeAs4, FeSe4) in the iron-based superconductors. Despite the presence of this similar transition-metal pnictide layer, we find that both Ca2Cu6P5 and CaCu2-δP2 have temperature-independent magnetic susceptibility and show metallic behavior with no evidence of either magnetic ordering or superconductivity down to 1.8 K CaCu2-δP2 is slightly off-stoichiometric, with δ = 0.14. Theoretical calculations suggest that unlike Fe 3d-based magnetic materials with a large densitymore » of states (DOS) at the Fermi surface, Cu have comparatively low DOS, with the majority of the 3d spectral weight located well below Fermi level. The room-temperature resistivity value of Ca2Cu6P5 is only 9 μΩ-cm, due to a substantial plasma frequency and an inferred electron-phonon coupling λ of 0.073 (significantly smaller than that of metallic Cu). Also, microscopy result shows that Cu–Cu distance along the c-axis within the double layers can be very short (2.5 Å), even shorter than metallic elemental copper bond (2.56 Å). The value of dρ/dT for CaCu2-δP2 at 300 K is approximately three times larger than in Ca2Cu6P5, which suggests the likelihood of stronger electron-phonon coupling. This study shows that the details of Cu-P layers and bonding are important for their transport characteristics. In addition, it emphasizes the remarkable character of the DOS of ‘122’ iron-based materials, despite much structural similarities.« less

  17. Magnetic order tuned by Cu substitution in Fe1.1–zCuzTe

    SciTech Connect (OSTI)

    Wen, Jinsheng; Xu, Zhijun; Xu, Guangyong; Lumsden, M. D.; Valdivia, P. N.; Bourret-Courchesne, E.; Gu, Genda; Lee, Dung-Hai; Tranquada, J. M.; Birgeneau, R. J.

    2012-07-02

    We study the effects of Cu substitution in Fe₁.₁Te, the nonsuperconducting parent compound of the iron-based superconductor, Fe₁₊yTe₁₋xSex, utilizing neutron scattering techniques. It is found that the structural and magnetic transitions, which occur at ~60 K without Cu, are monotonically depressed with increasing Cu content. By 10% Cu for Fe, the structural transition is hardly detectable, and the system becomes a spin glass below 22 K, with a slightly incommensurate ordering wave vector of (0.5–δ, 0, 0.5) with δ being the incommensurability of 0.02, and correlation length of 12 Å along the a axis and 9 Å along the c axis. With 4% Cu, both transition temperatures are at 41 K, though short-range incommensurate order at (0.42, 0, 0.5) is present at 60 K. With further cooling, the incommensurability decreases linearly with temperature down to 37 K, below which there is a first-order transition to a long-range almost-commensurate antiferromagnetic structure. A spin anisotropy gap of 4.5 meV is also observed in this compound. Our results show that the weakly magnetic Cu has a large effect on the magnetic correlations; it is suggested that this is caused by the frustration of the exchange interactions between the coupled Fe spins.

  18. CuInSe/sub 2/-based photoelectrochemical cells: their use in characterization of thin CuInSe/sub 2/ films, and as photovoltaic cells per se

    SciTech Connect (OSTI)

    Cahen, D.; Chen, Y.W.; Ireland, P.J.; Noufi, R.; Turner, J.A.; Rincon, C.; Bachmann, K.J.

    1984-05-01

    Photoelectrochemistry has been employed to characterize the p-CuInSe/sub 2/ component of the CdS/CuInSe/sub 2/ on-metal and a nonaqueous electrolyte containing a redox couple not specifically adsorbed onto the semiconductor, we can test the films for photovoltaic activity and obtain effective electronic properties of them, before CdS deposition, in a nondestructive manner. Electrochemical decomposition of CuInSe/sub 2/ was investigated in acetonitrile solutions to determine the mechanism of decomposition (n and p) in the dark and under illumination. Electrochemical, solution chemical and surface analyses confirmed at the light-assisted decomposition of CuInSe/sub 2/ resulted in metal ions and elemental chalcogen. On the basis of the results from the electrochemical decomposition, and studies on the solid state chemistry of the (Cu/sub 2/Se)/sub x/(In/sub 2/Se/sub 3/)/sub 1-x/ system and surface analyses, the CuInSe/sub 2//polyiodide interface was stabilized and up to 11.7% conversion efficiencies were obtained.

  19. Identified high-pT spectra in Cu+Cu collisions at sqrt sNN=200 GeV

    SciTech Connect (OSTI)

    STAR Collaboration; Abelev, Betty

    2010-07-05

    We report new results on identified (anti)proton and charged pion spectra at large transverse momenta (3 < p{sub T} < 10 GeV/c) from Cu+Cu collisions at {radical}s{sub NN} = 200 GeV using the STAR detector at the Relativistic Heavy Ion Collider (RHIC). This study explores the system size dependence of two novel features observed at RHIC with heavy ions: the hadron suppression at high-p{sub T} and the anomalous baryon to meson enhancement at intermediate transverse momenta. Both phenomena could be attributed to the creation of a new form of QCD matter. The results presented here bridge the system size gap between the available pp and Au+Au data, and allow the detailed exploration for the on-set of the novel features. Comparative analysis of all available 200 GeV data indicates that the system size is a major factor determining both the magnitude of the hadron spectra suppression at large transverse momenta and the relative baryon to meson enhancement.

  20. Mechanical properties of Al-Cu alloy-SiC composites

    SciTech Connect (OSTI)

    Anggara, B. S.; Handoko, E.; Soegijono, B.

    2014-09-25

    The synthesis of aluminum (Al) alloys, Al-Cu, from mixture 96.2 % Al and 3.8 % Cu has been prepared by melting process at a temperature of 1200°C. The adding 12.5 wt% up to 20 wt% of SiC on Al-Cu alloys samples has been investigated. The structure analyses were examined by X-Ray Diffractometer (XRD) and scanning electron microscope (SEM). Moreover, the morphology of Al-Cu alloys has been seen as structure in micrometer range. The hardness was measured by hardness Vickers method. According to the results, it can be assumed that the 15 wt% of SiC content is prefer content to get better quality of back to back hardness Vickers of Al-Cu alloys.

  1. Facile synthesis of Ag–Cu{sub 2}O composites with enhanced photocatalytic activity

    SciTech Connect (OSTI)

    Yang, Jianbo; Li, Zhen; Zhao, Caixin; Wang, Yang; Liu, Xueqin

    2014-12-15

    Highlights: • Ag–Cu{sub 2}O nanocomposites were synthesized via awet-chemical precipitation route. • The growth temperature does not exceed 50 °C in any step of the synthesis. • Enhanced photocurrent of Ag–Cu{sub 2}O composites, compared to pure Cu{sub 2}O particles. • The photocatalytic property was studied upon simulated sunlight. • Enhanced photocatalytic property of Ag–Cu{sub 2}O composites, compared to pure Cu{sub 2}O particles. - Abstract: Silver–cuprous oxide (Ag–Cu{sub 2}O) microcomposites are successfully prepared by a facile low-cost solution method. The obtained materials were characterized by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FESEM), ultraviolet–visible (UV–vis) spectroscopy, X-ray photoelectron spectroscopy (XPS). Experiments demonstrated that the formation of Ag–Cu{sub 2}O microcomposites was significantly influenced by the concentration of AgNO{sub 3}, and with increasing the concentration of AgNO{sub 3}, the optical absorption of the composites becomes strong. The photocatalytic activity of the prepared Ag–Cu{sub 2}O composites was determined by measuring the degradation of methyl orange solution under visible light, to find out its potential application in waste water treatment. The results reveal that the photocurrent of the composite is about 4 times higher than that of pure Cu{sub 2}O and the visible light photocatalytic activity of the composite is enhanced greatly on degradation of methyl orange. The reason for improvement in photocatalytic activity of the Ag–Cu{sub 2}O composites was also discussed.

  2. Mechanism of abnormally slow crystal growth of CuZr alloy

    SciTech Connect (OSTI)

    Yan, X. Q.; Lü, Y. J.

    2015-10-28

    Crystal growth of the glass-forming CuZr alloy is shown to be abnormally slow, which suggests a new method to identify the good glass-forming alloys. The crystal growth of elemental Cu, Pd and binary NiAl, CuZr alloys is systematically studied with the aid of molecular dynamics simulations. The temperature dependence of the growth velocity indicates the different growth mechanisms between the elemental and the alloy systems. The high-speed growth featuring the elemental metals is dominated by the non-activated collision between liquid-like atoms and interface, and the low-speed growth for NiAl and CuZr is determined by the diffusion across the interface. We find that, in contrast to Cu, Pd, and NiAl, a strong stress layering arisen from the density and the local order layering forms in front of the liquid-crystal interface of CuZr alloy, which causes a slow diffusion zone. The formation of the slow diffusion zone suppresses the interface moving, resulting in much small growth velocity of CuZr alloy. We provide a direct evidence of this explanation by applying the compressive stress normal to the interface. The compression is shown to boost the stress layering in CuZr significantly, correspondingly enhancing the slow diffusion zone, and eventually slowing down the crystal growth of CuZr alloy immediately. In contrast, the growth of Cu, Pd, and NiAl is increased by the compression because the low diffusion zones in them are never well developed.

  3. VisGreenWorkshop Findings

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    "Visualization Greenbook" Future Visualization Needs of the DOE Computational Science Community Hosted at NERSC Report Prepared by: Bernd Hamann, UC Davis E. Wes Bethel, LBNL/NERSC Horst Simon, LBNL/NERSC Juan Meza, LBNL/NERSC October 2002 Lawrence Berkeley National Laboratory - 1 - 1 Executive Summary .................................................................................................... 3 2

  4. Two Billion Cars: What it Means for Climate and Energy Policy

    SciTech Connect (OSTI)

    Daniel Sperling

    2009-04-15

    April 13, 2009: Daniel Sperling, director of the Institute of Transportation Studies at UC Davis, presents the next installment of Berkeley Lab's Environmental Energy Technologies Divisions Distinguished Lecture series. He discusses Two Billion Cars and What it Means for Climate and Energy Policy.

  5. Two Billion Cars: What it Means for Climate and Energy Policy

    ScienceCinema (OSTI)

    Daniel Sperling

    2010-01-08

    April 13, 2009: Daniel Sperling, director of the Institute of Transportation Studies at UC Davis, presents the next installment of Berkeley Lab's Environmental Energy Technologies Divisions Distinguished Lecture series. He discusses Two Billion Cars and What it Means for Climate and Energy Policy.

  6. Enhanced quality thin film Cu(In,Ga)Se[sub 2] for semiconductor device applications by vapor-phase recrystallization

    DOE Patents [OSTI]

    Tuttle, J.R.; Contreras, M.A.; Noufi, R.; Albin, D.S.

    1994-10-18

    Enhanced quality thin films of Cu[sub w](In,Ga[sub y])Se[sub z] for semiconductor device applications are fabricated by initially forming a Cu-rich, phase-separated compound mixture comprising Cu(In,Ga):Cu[sub x]Se on a substrate to form a large-grain precursor and then converting the excess Cu[sub x]Se to Cu(In,Ga)Se[sub 2] by exposing it to an activity of In and/or Ga, either in vapor In and/or Ga form or in solid (In,Ga)[sub y]Se[sub z]. Alternatively, the conversion can be made by sequential deposition of In and/or Ga and Se onto the phase-separated precursor. The conversion process is preferably performed in the temperature range of about 300--600 C, where the Cu(In,Ga)Se[sub 2] remains solid, while the excess Cu[sub x]Se is in a liquid flux. The characteristic of the resulting Cu[sub w](In,Ga)[sub y]Se[sub z] can be controlled by the temperature. Higher temperatures, such as 500--600 C, result in a nearly stoichiometric Cu(In,Ga)Se[sub 2], whereas lower temperatures, such as 300--400 C, result in a more Cu-poor compound, such as the Cu[sub z](In,Ga)[sub 4]Se[sub 7] phase. 7 figs.

  7. Enhanced quality thin film Cu(In,Ga)Se.sub.2 for semiconductor device applications by vapor-phase recrystallization

    DOE Patents [OSTI]

    Tuttle, John R.; Contreras, Miguel A.; Noufi, Rommel; Albin, David S.

    1994-01-01

    Enhanced quality thin films of Cu.sub.w (In,Ga.sub.y)Se.sub.z for semiconductor device applications are fabricated by initially forming a Cu-rich, phase-separated compound mixture comprising Cu(In,Ga):Cu.sub.x Se on a substrate to form a large-grain precursor and then converting the excess Cu.sub.x Se to Cu(In,Ga)Se.sub.2 by exposing it to an activity of In and/or Ga, either in vapor In and/or Ga form or in solid (In,Ga).sub.y Se.sub.z. Alternatively, the conversion can be made by sequential deposition of In and/or Ga and Se onto the phase-separated precursor. The conversion process is preferably performed in the temperature range of about 300.degree.-600.degree. C., where the Cu(In,Ga)Se.sub.2 remains solid, while the excess Cu.sub.x Se is in a liquid flux. The characteristic of the resulting Cu.sub.w (In,Ga).sub.y Se.sub.z can be controlled by the temperature. Higher temperatures, such as 500.degree.-600.degree. C., result in a nearly stoichiometric Cu(In,Ga)Se.sub.2, whereas lower temperatures, such as 300.degree.-400.degree. C., result in a more Cu-poor compound, such as the Cu.sub.z (In,Ga).sub.4 Se.sub.7 phase.

  8. Three 3D hybrid networks based on octamolybdates and different Cu{sup I}/Cu{sup II}-bis(triazole) motifs

    SciTech Connect (OSTI)

    Zhang, Chun-Jing; Pang, Hai-Jun; Tang, Qun; Wang, Hui-Yuan; Chen, Ya-Guang

    2010-12-15

    Three 3D compounds based on octamolybdate clusters and various Cu{sup I}/Cu{sup II}-bis(triazole) motifs, [Cu{sup I}{sub 2}btb][{beta}-Mo{sub 8}O{sub 26}]{sub 0.5} (1), [Cu{sup I}{sub 2}btpe][{beta}-Mo{sub 8}O{sub 26}]{sub 0.5} (2), and [Cu{sup II}(btpe){sub 2}][{beta}-Mo{sub 8}O{sub 26}]{sub 0.5} (3) [btb=1,4-bis(1,2,4-triazol-1-yl)butane, btpe=1,5-bis(1,2,4-triazol-1-yl)pentane], were isolated via tuning flexible ligand spacer length and metal coordination preferences. In 1, the copper(I)-btb motif is a one-dimensional (1D) chain which is further linked by hexadentate {beta}-[Mo{sub 8}O{sub 26}]{sup 4-} clusters via coordinating to Cu{sup I} cations giving a 3D structure. In 2, the copper(I)-btpe motif exhibits a 'stairs'-like [Cu{sup I}{sub 2}btpe]{sup 2+} sheet, and the tetradentate {beta}-[Mo{sub 8}O{sub 26}]{sup 4-} clusters interact with two neighboring [Cu{sup I}{sub 2}btpe]{sup 2+} sheets constructing a 3D framework. In 3, the copper(II)-btpe motif possesses a novel (2D{yields}3D) interdigitated structure, which is further connected by the tetradentate {beta}-[Mo{sub 8}O{sub 26}]{sup 4-} clusters forming a 3D framework. The thermal stability and luminescent properties of 1-3 are investigated in the solid state. -- Graphical abstract: Three 3D compounds based on {beta}-[Mo{sub 8}O{sub 26}]{sup 4-} clusters with different Cu{sup I}/Cu{sup II}-bis(triazole) motifs were synthesized by regularly tuning flexible ligand spacer length and metal coordination preferences. Display Omitted

  9. Effects of laser irradiation on the morphology of Cu(110)

    SciTech Connect (OSTI)

    Brandstetter, T.; Draxler, M.; Hohage, M.; Zeppenfeld, P.; Stehrer, T.; Heitz, J.; Georgiev, N.; Martinotti, D.; Ernst, H.-J.

    2008-07-15

    The effects of pulsed laser irradiation on the morphology of the Cu(110) surface were investigated by means of reflectance difference spectroscopy (RDS) and spot profile analysis low-energy electron diffraction (SPA-LEED). The laser light induces surface defects (adatoms and islands) as well as subsurface dislocation lines. The high surface mobility leads to efficient annealing of the surface defects even at room temperature, whereas the subsurface dislocation lines persist up to temperatures T>800 K. SPA-LEED profiles of the (00) diffraction spot from the laser irradiated surface suggest an anisotropic distribution of the subsurface line defects related to the geometry of the fcc easy glide system, which is corroborated by STM measurements. Comparative experiments using conventional Ar ion bombardment point out the distinctiveness of the morphological changes induced by laser irradiation.

  10. Crystallization in supercooled liquid Cu: Homogeneous nucleation and growth

    SciTech Connect (OSTI)

    E, J. C.; Wang, L.; Luo, S. N.; Cai, Y.; Wu, H. A.

    2015-02-14

    Homogeneous nucleation and growth during crystallization of supercooled liquid Cu are investigated with molecular dynamics simulations, and the microstructure is characterized with one- and two-dimensional x-ray diffraction. The resulting solids are single-crystal or nanocrystalline, containing various defects such as stacking faults, twins, fivefold twins, and grain boundaries; the microstructure is subject to thermal fluctuations and extent of supercooling. Fivefold twins form via sequential twinning from the solid-liquid interfaces. Critical nucleus size and nucleation rate at 31% supercooling are obtained from statistical runs with the mean first-passage time and survival probability methods, and are about 14 atoms and 10{sup 32} m{sup −3}s{sup −1}, respectively. The bulk growth dynamics are analyzed with the Johnson-Mehl-Avrami law and manifest three stages; the Avrami exponent varies in the range of 1–19, which also depends on thermal fluctuations and supercooling.

  11. Kondo interactions from band reconstruction in YbInCu?

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Jarrige, I.; Kotani, A.; Yamaoka, H.; Tsujii, N.; Ishii, K.; Upton, M.; Casa, D.; Kim, J.; Gog, T.; Hancock, J. N.

    2015-03-27

    We combine resonant inelastic X-ray scattering (RIXS) and model calculations in the Kondo lattice compound YbInCu?, a system characterized by a dramatic increase in Kondo temperature and associated valence fluctuations below a first-order valence transition at T?42 K. The bulk-sensitive, element-specific, and valence-projected charge excitation spectra reveal an unusual quasi-gap in the Yb-derived state density which drives an instability of the electronic structure and renormalizes the low-energy effective Hamiltonian at the transition. Our results provide long-sought experimental evidence for a link between temperature-driven changes in the low-energy Kondo scale and the higher-energy electronic structure of this system.

  12. Single-crystalline CuGeO{sub 3} nanorods: Synthesis, characterization and properties

    SciTech Connect (OSTI)

    Wang, Fangfang; Xing, Yan; Su, Zhongmin; Song, Shuyan

    2013-07-15

    Graphical abstract: - Highlights: Single crystalline CuGeO{sub 3} nanorods were prepared via a hydrothermal route. The material exhibits greatly enhanced activity in photocatalytic degradation of dyes. The magnetic susceptibility measurements indicate spin-Peierls transition properties. CuGeO{sub 3} nanorods may be of potential application in future integrated optical devices. - Abstract: Single crystalline CuGeO{sub 3} nanorods with a diameter of 2035 nm and a length up to 1 ?m have been prepared via a facile hydrothermal route with the assistance of ethylenediamine. Some influencing factors such as the reaction time, reaction temperature, the volume of ethylenediamine were revealed to play crucial roles in the formation of the CuGeO{sub 3} nanorods. A possible growth mechanism was proposed based on the experimental results. Significantly, this is the first time that CuGeO{sub 3} was used as a photocatalyst for organic pollutant degradation under UV light irradiation. The reaction constant (k) of CuGeO{sub 3} nanorods was five times that of the sample prepared by solid-state reaction under UV light irradiation. Additionally, the optical and magnetic properties of CuGeO{sub 3} nanorods were systematically studied.

  13. In situ visualization of metallurgical reactions in nanoscale Cu/Sn diffusion couples

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yin, Qiyue; Stach, Eric A.; Gao, Fan; Zhou, Guangwen; Gu, Zhiyong

    2015-02-10

    The Cu–Sn metallurgical soldering reaction in two-segmented Cu–Sn nanowires is visualized by in-situ transmission electron microscopy. By varying the relative lengths of Cu and Sn segments, we show that the metallurgical reaction starts at ~ 200 ° with the formation of a Cu–Sn solid solution for the Sn/Cu length ratio smaller than 1:5 while the formation of Cu–Sn intermetallic compounds (IMCs) for larger Sn/Cu length ratios. Upon heating the nanowires up to ~ 500 °C, two phase transformation pathways occur, η-Cu₆Sn₅ → ε-Cu₃Sn → δ-Cu₄₁Sn₁₁ for nanowires with a long Cu segment and η-Cu₆Sn₅ → ε-Cu₃Sn → γ-Cu₃Sn with amore » short Cu segment. The dynamic in situ TEM visualization of the evolution of Kirkendall voids demonstrates that Cu diffuses faster both in Sn and IMCs than that of Sn in Cu₃ and IMCs, which is the underlying cause of the dependence of the IMC formation and associated phase evolution on the relative lengths of the Cu and Sn segments.« less

  14. Characterization and device performance of (AgCu)(InGa)Se2 absorber layers

    SciTech Connect (OSTI)

    Hanket, Gregory; Boyle, Jonathan H.; Shafarman, William N.

    2009-06-08

    The study of (AgCu)(InGa)Se2 absorber layers is of interest in that Ag-chalcopyrites exhibit both wider bandgaps and lower melting points than their Cu counterparts. (AgCu)(InGa)Se2 absorber layers were deposited over the composition range 0 < Ag/(Ag+Cu) < 1 and 0.3 < Ga/(In+Ga) < 1.0 using a variety of elemental co-evaporation processes. Films were found to be singlephase over the entire composition range, in contrast to prior studies. Devices with Ga content 0.3 < Ga/(In+Ga) <0.5 tolerated Ag incorporation up to Ag/(Ag+Cu) = 0.5 without appreciable performance loss. Ag-containing films with Ga/(In+Ga) = 0.8 showed improved device characteristics over Cu-only control samples, in particular a 30-40% increase in short-circuit current. An absorber layer with composition Ag/(Ag+Cu) = 0.75 and Ga/(In+Ga) = 0.8 yielded a device with VOC = 890 mV, JSC = 20.5mA/cm2, fill factor = 71.3%, and ? = 13.0%.

  15. Isothermal Solid-State Transformation Kinetics Applied to Pd/Cu Alloy Membrane Fabrication

    SciTech Connect (OSTI)

    Pomerantz, Natalie L; Payzant, E Andrew; Ma, Yi Hua

    2010-01-01

    In this work, time-resolved, in situ high-temperature X-ray diffraction (HT-XRD) was used to study the solid-state transformation kinetics of the formation of the fcc Pd/Cu alloy from Pd/Cu bi-layers for the purpose of fabricating sulfur tolerant Pd/Cu membranes for H2 separation. Thin layers of Pd and Cu (total ~15 wt% Cu) were deposited on porous stainless steel (PSS) with the electroless deposition method and annealed in H2 at 500, 550 and 600 C. The kinetics of the annealing process were successfully described by the Avrami nucleation and growth model showing that the annealing process was diffusion controlled and one dimensional. The activation energy for the solid-state transformation was 175 kJ/mol, which was similar to the activation energy of Pd-Cu bulk interdiffusion. Furthermore, the Avrami model was able to successfully describe the changes in permeance and activation energy observed in Pd/Cu alloy membranes during characterization as they were annealed at high temperatures.

  16. Precipitates in a quasicrystal-strengthened Al–Mn–Be–Cu alloy

    SciTech Connect (OSTI)

    Zupanič, Franc; Wang, Di; Gspan, Cristian; Bončina, Tonica

    2015-08-15

    In this work, an Al–Mn–Be–Cu alloy was studied containing a primary and eutectic icosahedral quasicrystalline phase in the as-cast microstructure. Special attention was given to a transmission electron microscopy investigation of precipitates formed within the aluminium solid solution (Al{sub ss}) at different temperatures. At 200 °C, only binary Al–Cu precipitates (θ′) were formed. At 300 °C, icosahedral quasicrystalline (IQC) precipitates prevailed with a crystallographic orientation relationship with the Al{sub ss.} The rods of the T-phase (Al{sub 20}Mn{sub 3}Cu{sub 2}) which were precipitated above 400 °C, also had a specific orientation relationship with the Al{sub ss}. The primary and eutectic IQC microstructural constituent started to transform rapidly to the T-phase and Be{sub 4}Al(Mn,Cu) at 500 °C. - Highlights: • In a quasicrystal-strengthened Al-alloy several types of precipitates can form. • At 200 °C, only binary Al–Cu precipitates formed (Al{sub 2}Cu-θ′). • The icosahedral quasicrystalline (IQC) precipitates prevailed at 300 °C. • T-phase (Al{sub 20}Mn{sub 3}Cu{sub 2}) precipitated at temperatures above 400 °C. • The precipitation of different phases did not have a strong effect on hardness.

  17. Thermal chemistry of the Cu-KI5 atomic layer deposition precursor on a copper surface

    SciTech Connect (OSTI)

    Ma, Qiang; Zaera, Francisco

    2015-01-01

    The thermal chemistry of a Cu(I) ketoiminate complex, Cu-KI5, resulting from the modification of the known Air Products CupraSelect{sup } copper CVD precursor Cu(hfac)(tmvs) designed to tether the two ligands via an isopropoxide linker, was studied under ultrahigh vacuum on a Cu(110) single-crystal surface by using a combination of temperature programmed desorption (TPD) and x-ray photoelectron spectroscopy. Adsorption at low temperatures was determined to take place via the displacement of the vinyl ligand by the surface. Molecular desorption was seen at 210?K, and the evolution of Cu(II)-KI5{sub 2} was established to take place at 280?K, presumably from a disproportionation reaction that also leads to the deposition of Cu(0). Other sets of desorption products were seen at 150, 250, and 430?K, all containing copper atoms and small organic moieties with molecular masses below 100 amu. The latter TPD peak in particular indicates significant fragmentation of the ligands, likely at the CN bond that holds the vinylsilane-isopropoxide moiety tethered to the ketoimine fragment, and possibly also at the union between the vinylsilane and the alkoxide linker. The 430?K temperature measured for this chemistry may set an upper limit for clean Cu film deposition, but since reactivity on the surface was also found to be inhibited at higher surface coverages, it may be delayed to higher temperatures under atomic layer deposition conditions.

  18. Magnetic Dipole Moment of {sup 57,59}Cu Measured by In-Gas-Cell Laser Spectroscopy

    SciTech Connect (OSTI)

    Cocolios, T. E.; Andreyev, A. N.; Bastin, B.; Bree, N.; Buescher, J.; Elseviers, J.; Gentens, J.; Huyse, M.; Kudryavtsev, Yu.; Pauwels, D.; Van den Bergh, P.; Van Duppen, P.; Sonoda, T.

    2009-09-04

    For the first time, in-gas-cell laser spectroscopy study of the {sup 57,59,63,65}Cu isotopes has been performed using the 244.164 nm optical transition from the atomic ground state of copper. The nuclear magnetic dipole moments for {sup 57,59,65}Cu relative to that of {sup 63}Cu have been extracted. The new value for {sup 57}Cu of mu({sup 57}Cu)=+2.582(7)mu{sub N} is in strong disagreement with the previous literature value but in good agreement with recent theoretical and systematic predictions.

  19. Performance evaluation of ZnO–CuO hetero junction solid state room temperature ethanol sensor

    SciTech Connect (OSTI)

    Yu, Ming-Ru; Suyambrakasam, Gobalakrishnan; Wu, Ren-Jang; Department of Nanotechnology, School of Interdisciplinary Courses, Noorul Islam Centre for Higher Education, Noorul Islam University, Kumaracoil 629180, Tamil Nadu ; Chavali, Murthy; Department of Applied Chemistry, Providence University, 200 Chungchi Road, Shalu, Taichung Hsien 433, Taiwan, R.O.C

    2012-07-15

    Graphical abstract: Sensor response (resistance) curves of time were changed from 150 ppm to 250 ppm alcohol concentration of ZnO–CuO 1:1. The response and recovery times were measured to be 62 and 83 s, respectively. The sensing material ZnO–CuO is a high potential alcohol sensor which provides a simple, rapid and highly sensitive alcohol gas sensor operating at room temperature. Highlights: ► The main advantages of the ethanol sensor are as followings. ► Novel materials ZnO–CuO ethanol sensor. ► The optimized ZnO–CuO hetero contact system. ► A good sensor response and room working temperature (save energy). -- Abstract: A semiconductor ethanol sensor was developed using ZnO–CuO and its performance was evaluated at room temperature. Hetero-junction sensor was made of ZnO–CuO nanoparticles for sensing alcohol at room temperature. Nanoparticles were prepared by hydrothermal method and optimized with different weight ratios. Sensor characteristics were linear for the concentration range of 150–250 ppm. Composite materials of ZnO–CuO were characterized using X-ray diffraction (XRD), temperature-programmed reduction (TPR) and high-resolution transmission electron microscopy (HR-TEM). ZnO–CuO (1:1) material showed maximum sensor response (S = R{sub air}/R{sub alcohol}) of 3.32 ± 0.1 toward 200 ppm of alcohol vapor at room temperature. The response and recovery times were measured to be 62 and 83 s, respectively. The linearity R{sup 2} of the sensor response was 0.9026. The sensing materials ZnO–CuO (1:1) provide a simple, rapid and highly sensitive alcohol gas sensor operating at room temperature.

  20. Crystal structure and magnetic properties of NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl

    SciTech Connect (OSTI)

    Jin Tengteng; Liu Wei; Chen Shuang; Prots, Yurii; Schnelle, Walter; Zhao Jingtai; Kniep, Ruediger; Hoffmann, Stefan

    2012-08-15

    A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Single-crystal X-ray diffraction data show that the title compound crystallizes in the monoclinic system, space group P2{sub 1}/c (No. 14), with lattice parameters a=8.392(2) A, b=6.3960(10) A, c=16.670(2) A, {beta}=109.470(10) Degree-Sign , V=843.6(3) A{sup 3}, Z=4. The crystal structure is characterized by a complex chain of copper-centered polyhedra running along [0 1 0] which are connected by phosphate tetrahedra. The resulting three-dimensional polyhedra framework exhibits channels filled by additional copper and sodium atoms. Field and temperature dependent measurements of the specific heat and the magnetic susceptibility reveal low-dimensional magnetic behavior. The compound starts to decompose at 700 K under release of oxygen and evaporation of Cu{sup I}Cl as shown by simultaneous thermogravimetry and mass spectrometry. - Graphical abstract: The crystal structure of the new copper(II) phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], exhibits linear chains of copper tetrahedra which show low-dimensional magnetic behavior proven by specific heat and magnetic susceptibility measurements. Highlights: Black-Right-Pointing-Pointer A new copper(II) oxide phosphate chloride, NaCu{sup II}[(Cu{sup II}{sub 3}O)(PO{sub 4}){sub 2}Cl], has been synthesized by flux synthesis. Black-Right-Pointing-Pointer The crystal structure comprises chains of Cu{sub 4}O tetrahedra. Black-Right-Pointing-Pointer Low-dimensional behavior has been proven by magnetic and specific heat measurements. Black-Right-Pointing-Pointer On heating, Cu{sup I}Cl and oxygen are released shown by simultaneous thermogravimetry and mass spectrometry.

  1. Atomic-scale studies on the effect of boundary coherency on stability in twinned Cu

    SciTech Connect (OSTI)

    Niu, Rongmei; Han, Ke Su, Yi-Feng; Salters, Vincent J.

    2014-01-06

    The stored energy and hardness of nanotwinned (NT) Cu are related to interaction between dislocations and (111)-twin boundaries (TBs) studied at atomic scales by high-angle annular dark-field scanning transmission electron microscope. Lack of mobile dislocations at coherent TBs (CTBs) provides as-deposited NT Cu a rare combination of stability and hardness. The introduction of numerous incoherent TBs (ITBs) reduces both the stability and hardness. While storing more energy in their ITBs than in the CTBs, deformed NT Cu also exhibits high dislocation density and TB mobility and therefore has increased the driving force for recovery, coarsening, and recrystallization.

  2. Non-uniform Aging on Super Duty Diesel Truck Aged Urea Cu/Zeolite SCR

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Catalysts | Department of Energy uniform Aging on Super Duty Diesel Truck Aged Urea Cu/Zeolite SCR Catalysts Non-uniform Aging on Super Duty Diesel Truck Aged Urea Cu/Zeolite SCR Catalysts Cu/Zeolite SCR catalysts aged for 50k miles on a Super Duty diesel truck deer10_cheng.pdf (950.84 KB) More Documents & Publications Deactivation Mechanisms of Base Metal/Zeolite Urea Selective Catalytic Reduction Materials, and Development of Zeolite-Based Hydrocarbon Adsorber Materials Deactivation

  3. Phosphorescence quenching by mechanical stimulus in CaZnOS:Cu

    SciTech Connect (OSTI)

    Tu, Dong; Kamimura, Sunao; Xu, Chao-Nan; Fujio, Yuki; Sakata, Yoshitaro; Ueno, Naohiro

    2014-07-07

    We have found that phosphorescence intensity of CaZnOS:Cu decreased visibly under an applied load. This mechanical quenching (MQ) of phosphorescence in CaZnOS:Cu corresponded to the mechanical stimuli. We have thus demonstrated that the MQ of CaZnOS:Cu could be used for visualizing stress distributions in practical applications. We propose that MQ arises from non-radiative recombination due to electron-transfer from trap levels to non-radiative centers as a result of the mechanical load.

  4. Y-Ba-Cu-O films prepared by a paint-on method

    SciTech Connect (OSTI)

    Shih, I.; Qiu, C.X.

    1988-02-29

    Polycrystalline films of Y-Ba-Cu-O with a thickness of about 20--40 ..mu..m have been prepared on alumina substrates using a paint-on method. The liquid source used was obtained by mixing powder of Y/sub 2/O/sub 3/, BaCO/sub 3/, and CuO in liquid triethanolamine. Several Y-Ba-Cu-O films with an onset temperature of about 100 K and a zero resistance temperature of 85 K have been obtained after a short heat treatment at 1000 /sup 0/C in flowing O/sub 2/.

  5. Supported Au-CuO Catalysts for Low Temperature CO Oxidation | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Supported Au-CuO Catalysts for Low Temperature CO Oxidation Supported Au-CuO Catalysts for Low Temperature CO Oxidation Catalytic properties of Au-CuOx/SiO2 are investigated in removing pollutants from simulated automotive exhaust to meet an increasing demand for high emissions control at low temperatures. p-02_bauer.pdf (718.31 KB) More Documents & Publications Low Temperature Emission Control Vehicle Technologies Office Merit Review 2014: Low Temperature Emission Control to

  6. Structural evolution in Ti-Cu-Ni metallic glasses during heating

    SciTech Connect (OSTI)

    Gargarella, P.; Pauly, S.; Stoica, M.; Khn, U.; Vaughan, G.; Afonso, C. R. M.; Eckert, J.

    2015-01-01

    The structural evolution of Ti{sub 50}Cu{sub 43}Ni{sub 7} and Ti{sub 55}Cu{sub 35}Ni{sub 10} metallic glasses during heating was investigated by in-situ synchrotron X-ray diffraction. The width of the most intense diffraction maximum of the glassy phase decreases slightly during relaxation below the glass transition temperature. Significant structural changes only occur above the glass transition manifesting in a change in the respective peak positions. At even higher temperatures, nanocrystals of the shape memory B2-Ti(Cu,Ni) phase precipitate, and their small size hampers the occurrence of a martensitic transformation.

  7. Mixed-sputter deposition of Ni-Ti-Cu shape memory films

    SciTech Connect (OSTI)

    Krulevitch, P.; Ramsey, P.B.; Makowiecki, D.M.; Lee, A.P.; Northrup, M.A.; Johnson, G.C.

    1994-05-01

    Ni-Ti-Cu shape memory films were mixed-sputter deposited from separate nickel, titanium, and copper targets, providing increased compositional flexibility. Shape memory characteristics, examined for films with 7 at. % Cu and 41--51 at. % Tl, were determined with temperature controlled substrate curvature measurements, and microstructure was studied with transmission electron microscopy. The Ni-Ti-Cu films were found to have shape memory properties comparable to bulk materials, with transformation temperatures between 20 and 62{degree}C, a 10--13{degree}C hysteresis, and up to 330 MPa recoverable stress.

  8. Synthesis, structure and properties of new chain cuprates, Na{sub 3}Cu{sub 2}O{sub 4} and Na{sub 8}Cu{sub 5}O{sub 10}

    SciTech Connect (OSTI)

    Sofin, Mikhail; Peters, Eva-Maria; Jansen, Martin . E-mail: jansen@fkf.mpg.de

    2005-12-15

    Na{sub 3}Cu{sub 2}O{sub 4} and Na{sub 8}Cu{sub 5}O{sub 10} were prepared via the azide/nitrate route from stoichiometric mixtures of the precursors CuO, NaN{sub 3} and NaNO{sub 3}. Single crystals have been grown by subsequent annealing of the as prepared powders at 500 deg. C for 2000h in silver crucibles, which were sealed in glass ampoules under dried Ar. According to the X-ray analysis of the crystal structures (Na{sub 3}Cu{sub 2}O{sub 4}: P2{sub 1}/n, Z=4, a=5.7046(2), b=11.0591(4), c=8.0261(3)A, {beta}=108.389(1){sup o}, 2516 independent reflections, R{sub 1}(all)=0.0813, wR{sub 2} (all)=0.1223; Na{sub 8}Cu{sub 5}O{sub 10}: Cm, Z=2, a=8.228(1), b=13.929(2), c=5.707(1)A, {beta}=111.718(2){sup o}, 2949 independent reflections, R{sub 1}(all)=0.0349, wR{sub 2} (all)=0.0850), the main feature of both crystal structures are CuO{sub 2} chains built up from planar, edge-sharing CuO{sub 4} squares. From the analysis of the Cu-O bond lengths, the valence states of either +2 or +3 can be unambiguously assigned to each copper atom. In Na{sub 3}Cu{sub 2}O{sub 4} these ions alternate in the chains, in Na{sub 8}Cu{sub 5}O{sub 10} the periodically repeated part consists of five atoms according to Cu{sup II}-Cu{sup II}-Cu{sup III}-Cu{sup II}-Cu{sup III}. The magnetic susceptibilities show the dominance of antiferromagnetic interactions. At high temperatures the compounds exhibit Curie-Weiss behaviour (Na{sub 3}Cu{sub 2}O{sub 4}: {mu}=1.7{mu}{sub B}, {theta}=-160K, Na{sub 8}Cu{sub 5}O{sub 10}: {mu}=1.8{mu}{sub B}, {theta}=-58K, magnetic moments per divalent copper ion). Antiferromagmetic ordering is observed to occur in these compounds below 13K (Na{sub 3}Cu{sub 2}O{sub 4}) and 24K (Na{sub 8}Cu{sub 5}O{sub 10})

  9. Effect of Cu2+ Activation on Interfacial Water Structure at the Sphalerite Surface as Studied by Molecular Dynamics Simulation

    SciTech Connect (OSTI)

    Jin, Jiaqi; Miller, Jan D.; Dang, Liem X.; Wick, Collin D.

    2015-12-10

    In the first part of this paper, an experimental contact angle study of the fresh and Cu2+ activated sphalerite-ZnS surface as well as the covellite-CuS (001) surface is reported describing the increased hydrophobic character of the surface during Cu2+ activation. In addition to these experimental results, the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite- CuS2 (100), and covellite-CuS (001) surfaces were examined using Molecular Dynamics Simulation (MDS). Our MDS results on the behavior of interfacial water at the fresh sphalerite-ZnS (110), copper-zinc sulfide-CuZnS2 (110), villamaninite-CuS2 (100), and covellite-CuS (001) surfaces include simulated contact angles, water number density distribution, water dipole orientation, water residence time, and hydrogen-bonding considerations. The copper content at the Cu2+ activated sphalerite surface seems to account for the increased hydrophobicity as revealed by both experimental and MD simulated contact angle measurements. The relatively greater hydrophobic character developed at the Cu2+ activated sphalerite surface and at the copper-zinc sulfide surface has been described by MDS, based on the structure of interfacial water and its dynamic properties. L.X.D. acknowledges funding from the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences, and Biosciences.

  10. The effect of Cu content on the structure of Ni{sub 1-x}Cu{sub x}Fe{sub 2}O{sub 4} spinels

    SciTech Connect (OSTI)

    Tan, Xiaoyan; The Institute of Applied Chemistry, Central South University of Forestry and Technology, Changsha, Hunan 412006 ; Li, Guiying; Zhao, Ying; Hu, Changwei

    2009-12-15

    A series of Ni{sub 1-x}Cu{sub x}Fe{sub 2}O{sub 4} (0 {<=} x {<=} 0.5) spinels were synthesized employing sol-gel combustion method at 400 {sup o}C. The decomposition process was monitored by thermal analysis, and the synthesized nanocrystallites were characterized by X-ray diffraction, transmission electron microscopy, infra-red and X-ray photoelectron spectroscopy. The decomposition process and ferritization occur simultaneously over the temperature range from 280 {sup o}C to 350 {sup o}C. TEM indicates the increase of lattice parameter and particle size with the increase of copper content in accordance with the XRD analysis. Cu{sup 2+} can enter the cubic spinel phase and occupy preferentially the B-sites within x = 0.3, and redundant copper forms CuO phase separately. A broadening of the O 1s region increases with the increment of copper content compared to pure NiFe{sub 2}O{sub 4}, showing different surface oxygen species from the spinel and CuO. Cu{sup 2+} substitution favors the occupancy of A-sites by Fe{sup 3+}.

  11. A Theoretical Study of Methanol Synthesis from CO(2) Hydrogenation on Metal-doped Cu(111) Surfaces

    SciTech Connect (OSTI)

    Liu P.; Yang, Y.; White, M.G.

    2012-01-12

    Density functional theory (DFT) calculations and Kinetic Monte Carlo (KMC) simulations were employed to investigate the methanol synthesis reaction from CO{sub 2} hydrogenation (CO{sub 2} + 3H{sub 2} {yields} CH{sub 3}OH + H{sub 2}O) on metal-doped Cu(111) surfaces. Both the formate pathway and the reverse water-gas shift (RWGS) reaction followed by a CO hydrogenation pathway (RWGS + CO-Hydro) were considered in the study. Our calculations showed that the overall methanol yield increased in the sequence: Au/Cu(111) < Cu(111) < Pd/Cu(111) < Rh/Cu(111) < Pt/Cu(111) < Ni/Cu(111). On Au/Cu(111) and Cu(111), the formate pathway dominates the methanol production. Doping Au does not help the methanol synthesis on Cu(111). Pd, Rh, Pt, and Ni are able to promote the methanol production on Cu(111), where the conversion via the RWGS + CO-Hydro pathway is much faster than that via the formate pathway. Further kinetic analysis revealed that the methanol yield on Cu(111) was controlled by three factors: the dioxomethylene hydrogenation barrier, the CO binding energy, and the CO hydrogenation barrier. Accordingly, two possible descriptors are identified which can be used to describe the catalytic activity of Cu-based catalysts toward methanol synthesis. One is the activation barrier of dioxomethylene hydrogenation, and the other is the CO binding energy. An ideal Cu-based catalyst for the methanol synthesis via CO{sub 2} hydrogenation should be able to hydrogenate dioxomethylene easily and bond CO moderately, being strong enough to favor the desired CO hydrogenation rather than CO desorption but weak enough to prevent CO poisoning. In this way, the methanol production via both the formate and the RWGS + CO-Hydro pathways can be facilitated.

  12. Non-Equilibrium Superconductivity and Quasiparticle Dynamics in YBaCuO

    SciTech Connect (OSTI)

    Siders, J.L.W.; Jacobs, R.N.; Siders, C.W.; Trugman, S.A.; Taylor, A.J.

    1999-05-21

    The authors use optical pump, coherent terahertz probe spectroscopy to transiently excite nonequilibrium populations of quasiparticles in YBa{sub 2}Cu{sub 3}O{sub 7.{delta}} and monitor, with picosecond resolution, the superfluid and quasiparticle dynamics.

  13. Measurement of Cross Sections for the 63Cu(alpha,gamma)67Ga Reaction...

    Office of Scientific and Technical Information (OSTI)

    Title: Measurement of Cross Sections for the 63Cu(alpha,gamma)67Ga Reaction from 5.9-8.7 MeV Authors: Basunia, M S ; Norman, E B ; Shugart, H A ; Smith, A R ; Dolinski, M J ; ...

  14. Metallicity of Ca2Cu6P5 with single and double copper-pnictide...

    Office of Scientific and Technical Information (OSTI)

    Metallicity of Ca2Cu6P5 with single and double copper-pnictide layers Citation Details In-Document Search This content will become publicly available on February 16, 2017 Title: ...

  15. Time-resolved soft x-ray spectra from laser-produced Cu plasma...

    Office of Scientific and Technical Information (OSTI)

    Cu plasma The volumetric heating of a thin copper target has been studied with time resolved x-ray spectroscopy. The copper target was heated from a plasma produced using ...

  16. Magnetization of underdoped YBa 2 Cu 3 O y above the irreversibility...

    Office of Scientific and Technical Information (OSTI)

    Title: Magnetization of underdoped YBa 2 Cu 3 O y above the irreversibility field Authors: Yu, Jing Fei ; Ramshaw, B. J. ; Kokanovi, I. ; Modic, K. A. ; Harrison, N. ; Day, James ...

  17. First-principles study of roles of Cu and Cl in polycrystalline CdTe

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Yang, Ji -Hui; Yin, Wan -Jian; Park, Ji -Sang; Metzger, Wyatt; Wei, Su -Huai

    2016-01-25

    In this study, Cu and Cl treatments are important processes to achieve high efficiency polycrystalline cadmium telluride (CdTe) solar cells, thus it will be beneficial to understand the roles they play in both bulk CdTe and CdTe grain boundaries (GBs). Using first-principles calculations, we systematically study Cu and Cl-related defects in bulk CdTe. We find that Cl has only a limited effect on improving p-type doping and too much Cl can induce deep traps in bulk CdTe, whereas Cu can enhance ptype doping of bulk CdTe. In the presence of GBs, we find that, in general, Cl and Cu willmore » prefer to stay at GBs, especially for those with Te-Te wrong bonds, in agreement with experimental observations.« less

  18. Critical CuI buffer layer surface density for organic molecular crystal orientation change

    SciTech Connect (OSTI)

    Ahn, Kwangseok; Kim, Jong Beom; Lee, Dong Ryeol; Kim, Hyo Jung; Lee, Hyun Hwi

    2015-01-21

    We have determined the critical surface density of the CuI buffer layer inserted to change the preferred orientation of copper phthalocyanine (CuPc) crystals grown on the buffer layer. X-ray reflectivity measurements were performed to obtain the density profiles of the buffer layers and out-of-plane and 2D grazing-incidence X-ray diffraction measurements were performed to determine the preferred orientations of the molecular crystals. Remarkably, it was found that the preferred orientation of the CuPc film is completely changed from edge-on (1 0 0) to face-on (1 1 −2) by a CuI buffer layer with a very low surface density, so low that a large proportion of the substrate surface is bare.

  19. Measurement of cross sections for the Cu-63(alpha,gamma)Ga-67...

    Office of Scientific and Technical Information (OSTI)

    Title: Measurement of cross sections for the Cu-63(alpha,gamma)Ga-67 reaction from 5.9-8.7 MeV Authors: Basunia, M S ; Norman, E B ; Shugart, H A ; Smith, A R ; Dolinski, M J ; ...

  20. Method of synthesizing and growing copper-indium-diselenide (CuInSe.sub.2) crystals

    DOE Patents [OSTI]

    Ciszek, Theodore F.

    1987-01-01

    A process for preparing CuInSe.sub.2 crystals includes melting a sufficient quantity of B.sub.2 O.sub.3 along with stoichiometric quantities of Cu, In, and Se in a crucible in a high pressure atmosphere of inert gas to encapsulate the CuInSe.sub.2 melt and confine the Se to the crucible. Additional Se in the range of 1.8 to 2.2 percent over the stoichiometric quantity is preferred to make up for small amounts of Se lost in the process. The crystal is grown by inserting a seed crystal through the B.sub.2 O.sub.3 encapsulate into contact with the CuInSe.sub.2 melt and withdrawing the seed upwardly to grow the crystal thereon from the melt.

  1. Method of synthesizing and growing copper-indium-diselenide (CuInSe/sub 2/) crystals

    DOE Patents [OSTI]

    Ciszek, T.F.

    1984-11-29

    A process for preparing CuInSe/sub 2/ crystals includes melting a sufficient quantity of B/sub 2/O/sub 2/ along with stochiometric quantities of Cu, In, and Se in a crucible in a high-pressure atmosphere of inert gas to encapsulate the CuInSe/sub 2/ melt and confine the Se to the crucible. Additional Se in the range of 1.8 to 2.2% over the stochiometric quantity is preferred to make up for small amounts of Se lost in the process. The melt can then be cooled slowly to form the crystal as direct solidification, or the crystal can be grown by inserting a seed crystal through the B/sub 2/O/sub 3/ encapsulate into contact with the CuInSe/sub 2/ melt and withdrawing the seed upwardly to grow the crystal thereon from the melt.

  2. Structural and thermal properties of nanocrystalline CuO synthesized by reactive magnetron sputtering

    SciTech Connect (OSTI)

    Verma, M.; Gupta, V. K.; Gautam, Y. K.; Dave, V.; Chandra, R.

    2014-01-28

    Recent research has shown immense application of metal oxides like CuO, MgO, CaO, Al{sub 2}O{sub 3}, etc. in different areas which includes chemical warfare agents, medical drugs, magnetic storage media and solar energy transformation. Among the metal oxides, CuO nanoparticles are of special interest because of their excellent gas sensing and catalytic properties. In this paper we report structural and thermal properties of CuO synthesized by reactive magnetron DC sputtering. The synthesized nanoparticles were characterized by X-ray diffractometer. The XRD result reveals that as DC power increased from 30W to 80W, size of the CuO nanoparticles increased. The same results have been verified through TEM analysis. Thermal properties of these particles were studied using thermogravimetry.

  3. Broken Symmetry in the Pseudogap State of YBa2Cu3O6+x (Technical...

    Office of Scientific and Technical Information (OSTI)

    Title: Broken Symmetry in the Pseudogap State of YBa2Cu3O6+x Authors: Ramshaw, Brad 1 + Show Author Affiliations Los Alamos National Laboratory Los Alamos National Laboratory ...

  4. Ordered structures in YBa/sub 2/Cu/sub 3/O/sub 7-y/, La/sub 2-x/Sr/sub x/CuO/sub 4-par. delta/ and related perovskites

    SciTech Connect (OSTI)

    Mitchell, T.E.; Roy, T.; Fisk, Z.; Smith, J.L.

    1988-01-01

    Electron microscopy and electron diffraction studies have been performed on the superconducting oxides YBa/sub 2/Cu/sub 3/O/sub 7-y/, GdBa/sub 2/Cu/sub 3/O/sub 7-y/ and La/sub 2-x/Sr/sub x/CuO/sub 4-par. delta/ as well as the related perovskites La/sub 2/CuO/sub 4/, Eu/sub 2/CuO/sub 4/ and Gd/sub 2/CuO/sub 4/. Extra reflections are commonly observed in all the cases. For example, in the 123 compounds, in situ heating leads to transformations from orthorhombic to tetragonal with a loss of twin structure; on cooling the oxygen vacancies re-order in the basal plane to give 1/3(100)* or 1/4(110)* diffraction spots. In tetragonal Eu/sub 2/CuO/sub 4/ and Gd/sub 2/CuO/sub 4/, the (001) diffraction patterns often have extra spots at 1/2(110)* or at 1/4(110)* positions. Extra spots are also observed in La/sub 2/CuO/sub 4/ (orthorhombic) but this is probably due to the space group being primitive rather than centered. These observations are discussed in terms of the ordering of oxygen vacancies in the Cu-O planes of the various perovskite structures. 6 figs.

  5. Applying Kβ Valence-to-Core X-ray Emission Spectroscopy to Cu(I) Binding

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proteins with Relevance to Peptidylglycine Monooxygenase Reactivity | Stanford Synchrotron Radiation Lightsource Applying Kβ Valence-to-Core X-ray Emission Spectroscopy to Cu(I) Binding Proteins with Relevance to Peptidylglycine Monooxygenase Reactivity Thursday, June 30, 2016 Copper serves as a redox center in metalloproteins, often cycling between the +1 and +2 oxidation states. Oxidases, such as petidylglycine monooxygenase (PHM), bind oxygen at Cu(I) sites giving rise to "oxo"

  6. Understanding NOx SCR Mechanism and Activity on Cu/Chabazite Structures throughout the Catalyst Life Cycle

    SciTech Connect (OSTI)

    Ribeiro, Fabio; Delgass, Nick; Gounder, Rajmani; Schneider, William F.; Miller, Jeff; Yezerets, Aleksey; McEwen, Jean-Sabin; Peden, Charles HF; Howden, Ken

    2014-12-09

    Oxides of nitrogen (NOx) compounds contribute to acid rain and photochemical smog and have been linked to respiratory ailments. NOx emissions regulations continue to tighten, driving the need for high performance, robust control strategies. The goal of this project is to develop a deep, molecular level understanding of the function of Cu-SSZ-13 and Cu-SAPO-34 materials that catalyze the SCR of NOx with NH3.

  7. Doping Cu{sub 2}O in Electrolyte Solution: Dopant Incorporation, Atomic Structures and Electrical Properties

    SciTech Connect (OSTI)

    Tao, Meng; Zhang, Qiming

    2013-11-24

    We have pursued a number of research activities between April 2010 and April 2011:  A detailed study on n-type doping in Cu2O by Br;  An analysis of natural resource limitations to terawatt-scale solar cells;  Attempt to achieve a 1.4-eV direct band gap in Ni sulfides (NiSx);  First-principles studies of doping in Cu2O and electronic structures of NiSx.

  8. Thin-film polycrystalline n-ZnO/p-CuO heterojunction

    SciTech Connect (OSTI)

    Lisitski, O. L.; Kumekov, M. E.; Kumekov, S. E. Terukov, E. I.

    2009-06-15

    Results of X-ray diffraction and spectral-optical studies of n-ZnO and p-CuO films deposited by gas-discharge sputtering with subsequent annealing are presented. It is shown that, despite the difference in the crystal systems, the polycrystallinity of n-ZnO and p-CuO films enables fabrication of a heterojunction from this pair of materials.

  9. CU-CC-1-J Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CC-1-J Wholesale Power Rate Schedule CU-CC-1-J Wholesale Power Rate Schedule Area: Duke Energy Progress, Western Division System: CU This rate schedule shall be available to public bodies and cooperatives served through the facilities of Duke Energy Progress (formerly known as Carolina Power & Light Company), Western Division (hereinafter called the Customers). This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek,

  10. CU-CEK-1-I Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CEK-1-I Wholesale Power Rate Schedule CU-CEK-1-I Wholesale Power Rate Schedule Area: East Kentucky System: CU This rate schedule shall be available to East Kentucky Power Cooperative (hereinafter called the Customer). This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereinafter called collectively the

  11. CU-CK-1-I Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CK-1-I Wholesale Power Rate Schedule CU-CK-1-I Wholesale Power Rate Schedule Area: Kentucky Utilities System: CU This rate schedule shall be available to public bodies served through the facilities of Kentucky Utilities Company, (hereinafter called the Customers.) This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being

  12. CU-CM-1-I Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CM-1-I Wholesale Power Rate Schedule CU-CM-1-I Wholesale Power Rate Schedule Area: MEAM, MDEA, and SMEPA System: CU This rate schedule shall be available to the South Mississippi Electric Power Association, Municipal Energy Agency of Mississippi, and Mississippi Delta Energy Agency. This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such

  13. CU-CSI-1-I Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CSI-1-I Wholesale Power Rate Schedule CU-CSI-1-I Wholesale Power Rate Schedule Area: Southern Illinois System: CU This rate schedule shall be available to Southern Illinois Power Cooperative (hereinafter the Customer). This rate schedule shall be applicable to electric capacity and energy available from the Dale Hollow, Center Hill, Wolf Creek, Cheatham, Old Hickory, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereinafter called collectively the

  14. CU-CTV-1-I Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    CTV-1-I Wholesale Power Rate Schedule CU-CTV-1-I Wholesale Power Rate Schedule Area: Tennessee Valley Authority System: CU This rate schedule shall be available to the Tennessee Valley Authority (hereinafter called TVA). This rate schedule shall be applicable to electric capacity and energy generated at the Dale Hollow, Center Hill, Wolf Creek, Old Hickory, Cheatham, Barkley, J. Percy Priest, and Cordell Hull Projects (all of such projects being hereafter called collectively the "Cumberland

  15. CU-Replacement-3 Wholesale Power Rate Schedule | Department of Energy

    Energy Savers [EERE]

    Replacement-3 Wholesale Power Rate Schedule CU-Replacement-3 Wholesale Power Rate Schedule Area: Virginia, North Carolina, Tennessee, Georgia, Alabama, Mississippi, Kentucky, southern Illinois System: CU This rate schedule shall be available to public bodies and cooperatives ( any one of whom is hereinafter called the Customer) in Virginia, North Carolina, Tennessee, Georgia, Alabama, Mississippi, Kentucky and southern Illinois to whom power is provided pursuant to contracts between the

  16. The magnetic structure of EuCu2Sb2

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ryan, D. H.; Cadogan, J. M.; Anand, V. K.; Johnston, D. C.; Flacau, R.

    2015-05-06

    Antiferromagnetic ordering of EuCu2Sb2 which forms in the tetragonal CaBe2Ge2-type structure (space group P4/nmm #129) has been studied using neutron powder diffraction and 151Eu Mössbauer spectroscopy. The room temperature 151Eu isomer shift of –12.8(1) mm/s shows the Eu to be divalent, while the 151Eu hyperfine magnetic field (Bhf) reaches 28.7(2) T at 2.1 K, indicating a full Eu2+ magnetic moment. Bhf(T) follows a smoothmore » $$S=\\frac{7}{2}$$ Brillouin function and yields an ordering temperature of 5.1(1) K. Refinement of the neutron diffraction data reveals a collinear A-type antiferromagnetic arrangement with the Eu moments perpendicular to the tetragonal c-axis. As a result, the refined Eu magnetic moment at 0.4 K is 7.08(15) μB which is the full free-ion moment expected for the Eu2+ ion with $$S=\\frac{7}{2}$$ and a spectroscopic splitting factor of g = 2.« less

  17. Metallic glass alloys of Zr, Ti, Cu and Ni

    DOE Patents [OSTI]

    Lin, Xianghong; Peker, Atakan; Johnson, William L.

    1997-01-01

    At least quaternary alloys form metallic glass upon cooling below the glass transition temperature at a rate less than 10.sup.3 K/s. Such alloys comprise titanium from 19 to 41 atomic percent, an early transition metal (ETM) from 4 to 21 atomic percent and copper plus a late transition metal (LTM) from 49 to 64 atomic percent. The ETM comprises zirconium and/or hafnium. The LTM comprises cobalt and/or nickel. The composition is further constrained such that the product of the copper plus LTM times the atomic proportion of LTM relative to the copper is from 2 to 14. The atomic percentage of ETM is less than 10 when the atomic percentage of titanium is as high as 41, and may be as large as 21 when the atomic percentage of titanium is as low as 24. Furthermore, when the total of copper and LTM are low, the amount of LTM present must be further limited. Another group of glass forming alloys has the formula (ETM.sub.1-x Ti.sub.x).sub.a Cu.sub.b (Ni.sub.1-y Co.sub.y).sub.c wherein x is from 0.1 to 0.3, y.cndot.c is from 0 to 18, a is from 47 to 67, b is from 8 to 42, and c is from 4 to 37. This definition of the alloys has additional constraints on the range of copper content, b.

  18. Electrochemical synthesis of Nb3Sn coatings on Cu substrates

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Franz, S.; Barzi, E.; Turrioni, D.; Glionna, L.; Bestetti, M.

    2015-09-11

    This study aims at contributing to the development of superconducting Nb3Sn thin films for possible applications, as for instance in superconducting radio frequency (SRF) cavities. The synthesis of Nb-Sn coatings was carried out on copper substrates by electrodeposition from 1-Butyl-3-methylimidazolium chloride (BMIC) ionic liquids containing SnCl2 and NbCl5. Cyclic voltammetric curves were recorded to identify the reduction potentials of Nb and Sn ionic species. Electrodeposition was performed at 40 and 400 mA/cm2 and 130°C. The CV demonstrated that BMIC has a suitable potential window for co-deposition of Nb and Sn. The electrodeposited coatings showed a cubic Nb3Sn phase with (211)more » preferred orientation, a disordered orthorhombic NbSn2 phase and Sn-Cu phases. Film thickness was from 200 to 750 nm. These results suggest that electrodeposition of Nb-Sn coatings on copper substrates could be a suitable route to one day replace the current expensive Nb SRF cavities.« less

  19. Magnetic viscosity in Ni/Cu compositionally-modulated alloys

    SciTech Connect (OSTI)

    Bennett, L.H.; Swartzendruber, L.J.; Ettedgui, H.; Atzmony, U.; Lashmore, D.S; Watson, R.E.; Brookhaven National Lab., Upton, NY )

    1989-01-01

    The existence of a magnetic aftereffect ( magnetic viscosity'') in Ni/Cu multilayered alloys was established using a vibrating sample magnetometer at room temperature and at 86 K. It was shown that the effect is strongly dependent on the step field, H{sub 2} (i.e., the value the field is reduced to after the magnetic moment has been aligned in high field) and exhibits a maximum relaxation rate for values of H{sub 2} around the reverse coercive field, {minus}H{sub c}. Aftereffect behavior of this type has been observed in other materials, though most often for systems composed of superparamagnetic particles, where the relaxation freezes out at low temperatures. In contrast, the relaxation in the CMA was shown to be enhanced at 86 K over its value at room temperature. New measurements over a wider temperature range show that the enhancement in this sample reaches a maximum near 120 K, but below that temperature the relaxation does freeze out. The temperature of maximum enhancement varies from sample to sample. 6 refs.

  20. Magnetic and electronic correlations in YBa sub 2 Cu sub 3 O sub 6+x

    SciTech Connect (OSTI)

    Tranquada, J.M.

    1989-01-01

    YBa{sub 2}Cu{sub 3}O{sub 6+x} is an antiferromagnetic insulator in its tetragonal phase at small x, and it becomes a superconducting metal in the large x orthorhombic phase. The transition between the two phases is controlled by the orientational ordering of CuO{sub x} chain segments and dielectric screening by the BaO layers. In the orthorhombic phase, holes from the chains are transferred to the CuO{sub 2} planes, and the superconducting transition temperature scales with the density of O 2p holes. The antiferromagnetic ordering in the tetragonal phase is dominated by localized Cu moments in the CuO{sub 2} planes. The two-dimensional (2D) coupling between those spins is unusually strong. The interaction between nearest-neighbor planes is sufficiently strong that spins in bilayers remain highly correlated well above the Neel temperature. Long-range order is destroyed when a significant density of O 2p holes is present in the planes; however, there is evidence that Cu moments survive and interact in the metallic phase. 55 refs., 13 figs.