National Library of Energy BETA

Sample records for ua ve selected

  1. DOE/ARM UAS Plans

    Office of Scientific and Technical Information (OSTI)

    UAS Tests at Oliktok University of Alaska Fairbanks: In Situ A 20 (Boeing Scan Eagle); >45,000 flight hours, mostly in Iraq; 20+ hour flight duration; wing span just over 10 feet. ...

  2. The UA9 experimental layout

    SciTech Connect (OSTI)

    Scandale, W.; Robert-Demolaize, G.; Arduini, G.; Assmann, R.; Bracco, C.; et al

    2011-10-13

    The UA9 experimental equipment was installed in the CERN-SPS in March '09 with the aim of investigating crystal assisted collimation in coasting mode. Its basic layout comprises silicon bent crystals acting as primary collimators mounted inside two vacuum vessels. A movable 60 cm long block of tungsten located downstream at about 90 degrees phase advance intercepts the deflected beam. Scintillators, Gas Electron Multiplier chambers and other beam loss monitors measure nuclear loss rates induced by the interaction of the beam halo in the crystal. Two Roman pots installed in the path of the deflected particles are equipped with a Medipix detector to reconstruct the transverse distribution of the impinging beam. Finally UA9 takes advantage of an LHC-collimator prototype installed close to the first Roman pot to help in setting the beam conditions and to analyze the efficiency to deflect the beam. This paper describes in details the hardware installed to study the crystal collimation during 2010.

  3. Microsoft PowerPoint - UAS-ARM-betsy.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Unmanned Aircraft Systems Unmanned Aircraft Systems (UAS): Potential Benefits and (UAS): Potential Benefits and Current Status Current Status Betsy Weatherhead, U. Colorado Betsy Weatherhead, U. Colorado Sandy MacDonald, NOAA Sandy MacDonald, NOAA Sara Summers, NOAA Sara Summers, NOAA Outline Outline What are UAS? What are UAS? Why use UAS? Why use UAS? What has been done so far? What has been done so far? What is being planned? What is being planned? What are the current challenges? What are

  4. Unmanned Aerial Systems (UAS) Evaluation of Routine Atmospheric...

    Office of Scientific and Technical Information (OSTI)

    Subject: 54 Environmental Sciences UAS, ERASMUS, Oliktok, DataHawk2, temperature, pressure, relative humidity, wind speeds Dataset File size NAView Dataset View Dataset DOI: ...

  5. UAS Detection Classification and Neutralization: Market Survey 2015

    SciTech Connect (OSTI)

    Birch, Gabriel Carisle; Griffin, John Clark; Erdman, Matthew Kelly

    2015-07-01

    The purpose of this document is to briefly frame the challenges of detecting low, slow, and small (LSS) unmanned aerial systems (UAS). The conclusion drawn from internal discussions and external reports is the following; detection of LSS UAS is a challenging problem that can- not be achieved with a single detection modality for all potential targets. Classification of LSS UAS, especially classification in the presence of background clutter (e.g., urban environment) or other non-threating targets (e.g., birds), is under-explored. Though information of avail- able technologies is sparse, many of the existing options for UAS detection appear to be in their infancy (when compared to more established ground-based air defense systems for larger and/or faster threats). Companies currently providing or developing technologies to combat the UAS safety and security problem are certainly worth investigating, however, no company has provided the statistical evidence necessary to support robust detection, identification, and/or neutralization of LSS UAS targets. The results of a market survey are included that highlights potential commercial entities that could contribute some technology that assists in the detection, classification, and neutral- ization of a LSS UAS. This survey found no clear and obvious commercial solution, though recommendations are given for further investigation of several potential systems.

  6. Selection

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selected U.S. energy issues: a view from the Energy Information Administration for AAAS Fellows Department of Energy May 20, 2016 by Howard Gruenspecht, Deputy Administrator * EIA collects, analyzes, and disseminates independent and impartial energy information to promote sound policymaking, efficient markets, and public understanding of energy and its interaction with the economy and the environment * By law, data, analyses, and forecasts provided by EIA are independent of approval by any other

  7. Whirlpool: ENERGY STAR Referral (ASD2524VE)

    Broader source: Energy.gov [DOE]

    DOE referred the matter of Whirlpool's Amana-brand dishwasher model ASD2524VE to the EPA for appropriate action after DOE testing showed that the model does not meet the ENERGY STAR specification.

  8. PDSF Selected Announcements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selected Announcements PDSF Selected Announcements Exciting new PDSF developments February 25, 2014 I'm pleased to announce that PDSF successfully deployed new login nodes last week. Some of you may already have noticed that you are now landing on nodes named pdsf[6-8] when you ssh to pdsf.nersc.gov. Our new login nodes use the faster Mendel IB network and more modern hardware. We've gone from four nodes to three but, because each node has a higher core count, the processing power is staying the

  9. CO2ReMoVe | Open Energy Information

    Open Energy Info (EERE)

    of industrial, research and service organizations with experience in CO2 geological storage. References: CO2ReMoVe1 This article is a stub. You can help OpenEI by expanding...

  10. A Nuclear Family: I've Seen It | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    I've ... A Nuclear Family: I've Seen It The mp4 video format is not supported by this browser. Download video Captions: On Time: 26:42 min. Episode 1 shows how the lives of East...

  11. GloVe C++ v. 1.0

    Energy Science and Technology Software Center (OSTI)

    2015-12-02

    This code implements the GloVe algorithm for learning word vectors from a text corpus. It uses a modern C++ approach. This algorithm is described in the open literature in the referenced paper by Pennington, Jeffrey, Richard Socher, and Christopher D. Manning.

  12. TeVeS gets caught on caustics

    SciTech Connect (OSTI)

    Contaldi, Carlo R.; Wiseman, Toby; Withers, Benjamin

    2008-08-15

    TeVeS uses a dynamical vector field with timelike unit-norm constraint to specify a preferred local frame. When matter moves slowly in this frame--the so-called quasistatic regime--modified Newtonian dynamics results. Theories with such vectors (such as Einstein-Aether) are prone to the vector dynamics forming singularities that render their classical evolution problematic. Here, we analyze the dynamics of the vector in TeVeS in various situations. We begin by analytically showing that the vacuum solution of TeVeS forms caustic singularities under a large class of physically reasonably initial perturbations. This shows the classical evolution of TeVeS appears problematic in the absence of matter. We then consider matter by investigating black hole solutions. We find large classes of new black hole solutions with static geometries, where the curves generated by the vector field are attracted to the black hole and may form caustics. We go on to consider the full dynamics with matter by numerically simulating, assuming spherical symmetry, the gravitational collapse of a scalar, and the evolution of an initially nearly static boson star. We find that in both cases our initial data evolves so that the vector field develops caustic singularities on a time scale of order the gravitational in-fall time. Having shown singularity formation is generic with or without matter, Bekenstein's original formulation of TeVeS appears dynamically problematic. We argue that by modifying the vector field kinetic terms to the more general form used by Einstein-Aether, this problem may be avoided.

  13. Integration of APECS and VE-Suite for Data Overlay

    SciTech Connect (OSTI)

    McCorkel, Doug; Bivins, Gerrick; Jordan, Terry; Bryden, Mark; Zitney, S.E.; Widmann, John; Osawe, Maxwell

    2008-06-01

    In the design of advanced power generation facilities, process simulation tools are being utilized to model plant behavior and quickly analyze results. While such tools enable investigation of crucial aspects of plant design, typical commercial process simulators still do not explore some plant design information, including high-fidelity data from computational fluid dynamics (CFD) models of complex thermal and fluid flow phenomena, economics data used for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Software tools must be created that allow disparate sources of information to be integrated for facilitating accurate and effective plant design. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus®) and high-fidelity equipment simulation (e.g., FLUENT®). In this paper, the integration of the high-fidelity CFD data with overall process data in a virtual power simulation environment will be described. More specifically, we will highlight VE-Suite, an open-source virtual engineering (VE) software toolkit, and its support of Aspen Plus® Hierarchy blocks via the VE-AspenUnit.

  14. Integration of APECS and VE-Suite for data overlay

    SciTech Connect (OSTI)

    McCorkel, D.; Bivins, G.; Jordan, T.; Bryden, M.; Zitney, S.; Widmann, J.; Osawe, M.

    2008-01-01

    In the design of advanced power generation facilities, process simulation tools are being utilized to model plant behavior and quickly analyze results. While such tools enable investigation of crucial aspects of plant design, typical commercial process simulators still do not explore some plant design information, including high-fidelity data from computational fluid dynamics (CFD) models of complex thermal and fluid flow phenomena, economics data used for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Software tools must be created that allow disparate sources of information to be integrated for facilitating accurate and effective plant design. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus®) and high-fidelity equipment simulation (e.g., FLUENT®). In this paper, the integration of the high-fidelity CFD data with overall process data in a virtual power simulation environment will be described. More specifically, we will highlight VE-Suite, an open-source virtual engineering (VE) software toolkit, and its support of Aspen Plus® Hierarchy blocks via the VE-AspenUnit.

  15. DO WEM-0307 Advanced Worker Protection System TlVE TECHNOLOGY...

    Office of Scientific and Technical Information (OSTI)

    DO WEM-0307 Advanced Worker Protection System TlVE TECHNOLOGY SUMMARY REPORT aemonsrratea ... of Energy Off ice of Environmental Management Off ice of Science and Technology April ...

  16. Parametric study of a silica gel-water adsorption refrigeration cycle -- The influence of thermal capacitance and heat exchanger UA-values on cooling capacity, power density, and COP

    SciTech Connect (OSTI)

    Boelman, E.C.; Saha, B.B.; Kashiwagi, Takao

    1997-12-31

    The influence of heat exchanger UA-values (adsorber/desorber, evaporator, and condenser) is investigated for an adsorption chiller, with consideration given to the thermal capacitance of the adsorber/desorber by means of a lumped-parameter cycle simulation model developed by the authors and co-workers for the single-stage silica gel-water adsorption chiller. The closed-cycle-type chiller, for use in air conditioning, is driven by low-grade waste heat (85 C [185 F]) and cooled by water at 31 C (88 F) and operates on relatively short cycle times (420 seconds adsorption/desorption; 30 second adsorber/desorber sensible cooling and heating). The results showed cycle performance to be considerably affected by the thermal capacitance and UA-value of the adsorber/desorber, which is attributed to the severe sensible cooling/heating requirements resulting from batched cycle operation. The model is also sensitive to the evaporator UA-value--but to a lesser extent. The condenser UA-value is the least sensitive parameter due to the working pair adsorption behavior in the temperature range defined for desorption and condensation.

  17. Author Select

    Office of Scientific and Technical Information (OSTI)

    Authors Please use the pane on the left to start the selection process.

  18. PDSF Selected Announcements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    named pdsf6-8 when you ssh to pdsf.nersc.gov. Our new login nodes use the faster Mendel IB network and more modern hardware. We've gone from four nodes to three but, because...

  19. Author Select

    Office of Scientific and Technical Information (OSTI)

    Selection List Select "add" or "add all", which appear after author's names in the middle pane, to add to the search strategy that appears in this pane. Return to Search >>

  20. Author Select

    Office of Scientific and Technical Information (OSTI)

    Author Select Last Name First Name search Type in a name, or the first few letters of a name, in one or both of appropriate search boxes above and select "Go". An attempt will be...

  1. Author Select

    Office of Scientific and Technical Information (OSTI)

    Selection List Select "add" or "add all", which appear after author's names in the middle pane, to add to the search strategy that appears in this pane. Return to Search >>

  2. Author Select

    Office of Scientific and Technical Information (OSTI)

    Author Select Last Name First Name search Type in a name, or the first few letters of a name, in one or both of appropriate search boxes above and select "Go". An attempt will be made to match authors that most closely relate to the text you typed.

  3. Selection Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selection Process Selection Process Fellowships will be awarded based on academic excellence, relevance of candidate's research to the laboratory mission in fundamental nuclear science and relevance to Global Security or Science of Campaign missions. Contacts Director Albert Migliori Deputy Franz Freibert 505 667-6879 Email Professional Staff Assistant Susan Ramsay 505 665 0858 Email The Seaborg internal advisory committee will judge applications based on academic excellence, relevance of the

  4. Local Energy Assurance Planning Selected Cities

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Cities

  5. PDSF Selected Announcements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 2014 Exciting new PDSF developments February 25, 2014 I'm pleased to announce that PDSF successfully deployed new login nodes last week. Some of you may already have noticed that you are now landing on nodes named pdsf[6-8] when you ssh to pdsf.nersc.gov. Our new login nodes use the faster Mendel IB network and more modern hardware. We've gone from four nodes to three but, because each node has a higher core count, the processing power is staying the same. The old interactive nodes will

  6. Towards the Integration of APECS with VE-Suite to Create a Comprehensive Virtual Engineering Environment

    SciTech Connect (OSTI)

    McCorkle, D.; Yang, C.; Jordan, T.; Swensen, D.; Zitney, S.E.; Bryden, M.

    2007-06-01

    Modeling and simulation tools are becoming pervasive in the process engineering practice of designing advanced power generation facilities. These tools enable engineers to explore many what-if scenarios before cutting metal or constructing a pilot scale facility. While such tools enable investigation of crucial plant design aspects, typical commercial process simulation tools such as Aspen Plus®, gPROMS®, and HYSYS® still do not explore some plant design information, including computational fluid dynamics (CFD) models for complex thermal and fluid flow phenomena, economics models for policy decisions, operational data after the plant is constructed, and as-built information for use in as-designed models. Software tools must be created that allow disparate sources of information to be integrated if environments are to be constructed where process simulation information can be accessed. At the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL), the Advanced Process Engineering Co-Simulator (APECS) has been developed as an integrated software suite that combines process simulation (e.g., Aspen Plus) and high-fidelity equipment simulation (e.g., Fluent® CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper, we discuss the initial phases of integrating APECS with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite utilizes the ActiveX (OLE Automation) controls in Aspen Plus wrapped by the CASI library developed by Reaction Engineering International to run the process simulation and query for unit operation results. This integration permits any application that uses the VE-Open interface to integrate with APECS co-simulations, enabling construction of the comprehensive virtual engineering environment needed for the

  7. What Weve Learned from a Challenging Efficiency Goal

    Office of Environmental Management (EM)

    We've Learned From a Challenging Efficiency Goal Wendell Brase University of California, Irvine Hosted by: FEDERAL UTILITY PARTNERSHIP WORKING GROUP SEMINAR November 3-4, 2015 Houston, TX "And when I challenged colleges to reduce their energy use 20 percent by 2020, UC Irvine went ahead and did it last year. Done! So UC Irvine is ahead of the curve." President Barack Obama UCI Commencement June 14, 2014 What is a feasible energy efficiency goal? Facility Type Goal Laboratory building

  8. Towards the Integration of APECS and VE-Suite for Virtual Power Plant Co-Simulation

    SciTech Connect (OSTI)

    Zitney, S.E.; McCorkle, D.; Yang, C.; Jordan, T.; Swensen, D.; Bryden, M.

    2007-05-01

    Process modeling and simulation tools are widely used for the design and operation of advanced power generation systems. These tools enable engineers to solve the critical process systems engineering problems that arise throughout the lifecycle of a power plant, such as designing a new process, troubleshooting a process unit or optimizing operations of the full process. To analyze the impact of complex thermal and fluid flow phenomena on overall power plant performance, the Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) has developed the Advanced Process Engineering Co-Simulator (APECS). The APECS system is an integrated software suite that combines process simulation (e.g., Aspen Plus) and high-fidelity equipment simulations such as those based on computational fluid dynamics (CFD), together with advanced analysis capabilities including case studies, sensitivity analysis, stochastic simulation for risk/uncertainty analysis, and multi-objective optimization. In this paper we discuss the initial phases of the integration of the APECS system with the immersive and interactive virtual engineering software, VE-Suite, developed at Iowa State University and Ames Laboratory. VE-Suite uses the ActiveX (OLE Automation) controls in the Aspen Plus process simulator wrapped by the CASI library developed by Reaction Engineering International to run process/CFD co-simulations and query for results. This integration represents a necessary step in the development of virtual power plant co-simulations that will ultimately reduce the time, cost, and technical risk of developing advanced power generation systems.

  9. Pump Selection Considerations

    SciTech Connect (OSTI)

    Not Available

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency with pumping selection considerations.

  10. SOURCE SELECTION INFORMATION -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR) 2.101 AND 3.104 ... SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR) 2.101 AND 3.104 ...

  11. Strong lensing probability in TeVeS (tensor-vector-scalar) theory

    SciTech Connect (OSTI)

    Chen Daming

    2008-01-15

    We recalculate the strong lensing probability as a function of the image separation in TeVeS (tensor-vector-scalar) cosmology, which is a relativistic version of MOND (MOdified Newtonian Dynamics). The lens is modeled by the Hernquist profile. We assume an open cosmology with {Omega}{sub b} = 0.04 and {Omega}{sub {Lambda}} = 0.5 and three different kinds of interpolating functions. Two different galaxy stellar mass functions (GSMF) are adopted: PHJ (Panter, Heavens and Jimenez 2004 Mon. Not. R. Astron. Soc. 355 764) determined from SDSS data release 1 and Fontana (Fontana et al 2006 Astron. Astrophys. 459 745) from GOODS-MUSIC catalog. We compare our results with both the predicted probabilities for lenses from singular isothermal sphere galaxy halos in LCDM (Lambda cold dark matter) with a Schechter-fit velocity function, and the observational results for the well defined combined sample of the Cosmic Lens All-Sky Survey (CLASS) and Jodrell Bank/Very Large Array Astrometric Survey (JVAS). It turns out that the interpolating function {mu}(x) = x/(1+x) combined with Fontana GSMF matches the results from CLASS/JVAS quite well.

  12. Fellows' Nominations and Selections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Nominations and Selections Fellows' Nominations and Selections The Fellow appointment is an honor bestowed by the Director in recognition of unusual achievement by research and development (R&D) scientists and engineers. Fellows' nomination and selection process Definition The Fellow appointment is an honor bestowed by the Director in recognition of unusual achievement by research and development (R&D) scientists and engineers. It can be awarded to full-time R&D scientists, R&D

  13. SOURCE SELECTION INFORMATION -

    Broader source: Energy.gov (indexed) [DOE]

    SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR) 2.101 AND 3.104 Department of Energy Washington, DC 20585 (enter date here, centered revised template...

  14. Source Selection Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    source selection in accordance with Part 15 of the Federal Acquisition Regulation (FAR). ... CERTIFICATIONS Although there is no regulation requiring each Source Evaluation Board ...

  15. Frequency selective infrared sensors

    DOE Patents [OSTI]

    Davids, Paul; Peters, David W

    2013-05-28

    A frequency selective infrared (IR) photodetector having a predetermined frequency band. The exemplary frequency selective photodetector includes: a dielectric IR absorber having a first surface and a second surface substantially parallel to the first surface; an electrode electrically coupled to the first surface of the dielectric IR absorber; and a frequency selective surface plasmonic (FSSP) structure formed on the second surface of the dielectric IR absorber. The FSSP structure is designed to selectively transmit radiation in the predetermined frequency band that is incident on the FSSP structure substantially independent of the angle of incidence of the incident radiation on the FSSP structure.

  16. Frequency selective infrared sensors

    DOE Patents [OSTI]

    Davids, Paul; Peters, David W

    2014-11-25

    A frequency selective infrared (IR) photodetector having a predetermined frequency band. The exemplary frequency selective photodetector includes: a dielectric IR absorber having a first surface and a second surface substantially parallel to the first surface; an electrode electrically coupled to the first surface of the dielectric IR absorber; and a frequency selective surface plasmonic (FSSP) structure formed on the second surface of the dielectric IR absorber. The FSSP structure is designed to selectively transmit radiation in the predetermined frequency band that is incident on the FSSP structure substantially independent of the angle of incidence of the incident radiation on the FSSP structure.

  17. Selectable fragmentation warhead

    SciTech Connect (OSTI)

    Bryan, Courtney S.; Paisley, Dennis L.; Montoya, Nelson I.; Stahl, David B.

    1993-01-01

    A selectable fragmentation warhead capable of producing a predetermined number of fragments from a metal plate, and accelerating the fragments toward a target. A first explosive located adjacent to the plate is detonated at selected number of points by laser-driven slapper detonators. In one embodiment, a smoother-disk and a second explosive, located adjacent to the first explosive, serve to increase acceleration of the fragments toward a target. The ability to produce a selected number of fragments allows for effective destruction of a chosen target.

  18. Selectable fragmentation warhead

    SciTech Connect (OSTI)

    Bryan, C.S.; Paisley, D.L.; Montoya, N.I.; Stahl, D.B.

    1992-12-31

    This report discusses a selectable fragmentation warhead which is capable of producing a predetermined number of fragments from a metal plate, and accelerating the fragments toward a target. A first explosive located adjacent to the plate is detonated at selected number of points by laser-driven slapper detonators. In one embodiment, a smoother-disk and a second explosive, located adjacent to the first explosive, serve to increase acceleration of the fragments toward a target. The ability to produce a selected number of fragments allows for effective destruction of a chosen target.

  19. SOURCE SELECTION INFORMATION -

    Broader source: Energy.gov (indexed) [DOE]

    an action described in Section 311 of P.L. 112-74 in excess of 1,000,000. This information is source selection information related to the conduct of a Federal agency...

  20. Solar selective absorption coatings

    DOE Patents [OSTI]

    Mahoney, Alan R.; Reed, Scott T.; Ashley, Carol S.; Martinez, F. Edward

    2004-08-31

    A new class of solar selective absorption coatings are disclosed. These coatings comprise a structured metallic overlayer such that the overlayer has a sub-micron structure designed to efficiently absorb solar radiation, while retaining low thermal emissivity for infrared thermal radiation. A sol-gel layer protects the structured metallic overlayer from mechanical, thermal, and environmental degradation. Processes for producing such solar selective absorption coatings are also disclosed.

  1. Solar selective absorption coatings

    DOE Patents [OSTI]

    Mahoney, Alan R.; Reed, Scott T.; Ashley, Carol S.; Martinez, F. Edward

    2003-10-14

    A new class of solar selective absorption coatings are disclosed. These coatings comprise a structured metallic overlayer such that the overlayer has a sub-micron structure designed to efficiently absorb solar radiation, while retaining low thermal emissivity for infrared thermal radiation. A sol-gel layer protects the structured metallic overlayer from mechanical, thermal, and environmental degradation. Processes for producing such solar selective absorption coatings are also disclosed.

  2. Source Selection Guide

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chapter 15.1 1 Source Selection Overview This chapter provides guidance to the acquisition team on conducting source selection in accordance with Part 15 of the Federal Acquisition Regulation (FAR). Background The mid 1990's was a time of significant change in many areas of procurement, particularly in the introduction of new tools and processes that help the procurement professional better meet the needs of demanding customers. The passage of the Federal Acquisition Streamlining Act in 1994

  3. Undergraduate Program Selection Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selection Process Undergraduate Program Selection Process Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Student Programs (505) 665-0987 Email Student hiring process Once an application is submitted online, it is made available for all interested Laboratory hiring officials to view. Hiring officials are Laboratory employees who have the funding and work

  4. Graduate Program Selection Process

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selection Process Graduate Program Selection Process Point your career towards Los Alamos Lab: work with the best minds on the planet in an inclusive environment that is rich in intellectual vitality and opportunities for growth. Contact Student Programs (505) 665-0987 Email The student hiring process Thank you for your interest in Los Alamos National Laboratory's Student Programs. Once an application is submitted online, it is available for all interested Laboratory hiring officials to view.

  5. Salt Selected (FINAL)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WHY SALT WAS SELECTED AS A DISPOSAL MEDIUM Waste Isolation Pilot Plant U.S. Department Of Energy Government officials and scientists chose the Waste Isolation Pilot Plant (WIPP) site through a selection process that started in the 1950s. At that time, the National Academy of Sciences conducted a nationwide search for geological formations stable enough to contain radioactive wastes for thousands of years. In 1955, after extensive study, salt deposits were recommended as a promising medium for

  6. High Selectivity Oxygen Delignification

    SciTech Connect (OSTI)

    Lucian A. Lucia

    2005-11-15

    Project Objective: The objectives of this project are as follows: (1) Examine the physical and chemical characteristics of a partner mill pre- and post-oxygen delignified pulp and compare them to lab generated oxygen delignified pulps; (2) Apply the chemical selectivity enhancement system to the partner pre-oxygen delignified pulps under mill conditions (with and without any predetermined amounts of carryover) to determine how efficiently viscosity is preserved, how well selectivity is enhanced, if strength is improved, measure any yield differences and/or bleachability differences; and (3) Initiate a mill scale oxygen delignification run using the selectivity enhancement agent, collect the mill data, analyze it, and propose any future plans for implementation.

  7. All Selected Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Projects Oct 23, 2009 (rev. Dec. 14, 2010) 99 Projects SMART GRID INVESTMENT GRANTS Type Advanced Metering Infrastructure Customer Systems Electric Systems Distribution Electric Transmission Systems Equipment Manufacturing Integrated and/or Crosscutting Systems Circle indicates project where specific utility/area is not known.

  8. Select Solar | Open Energy Information

    Open Energy Info (EERE)

    Solar Jump to: navigation, search Logo: Select Solar Name: Select Solar Address: Unit 5 Blakehill Business Park Chelworth Road Cricklade SN6 6JD Place: Cricklade, United Kingdom...

  9. FLUID SELECTING APPARATUS

    DOE Patents [OSTI]

    Stinson, W.J.

    1958-09-16

    A valve designed to selectively sample fluids from a number of sources is described. The valve comprises a rotatable operating lever connected through a bellows seal to a rotatable assembly containing a needle valve, bearings, and a rotational lock. The needle valve is connected through a flexible tube to the sample fluid outlet. By rotating the lever the needle valve is placed over . one of several fluid sources and locked in position so that the fluid is traasferred through the flexible tubing and outlet to a remote sampling system. The fluids from the nonselected sources are exhausted to a waste line. This valve constitutes a simple, dependable means of selecting a sample from one of several scurces.

  10. SOURCE SELECTION INFORMATION -

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SOURCE SELECTION INFORMATION - SEE FEDERAL ACQUISITION REGULATION (FAR) 2.101 AND 3.104 Department of Energy Washington, DC 20585 (enter date here, centered revised template April 26, 2013) The Honorable Harold Rogers The Honorable Barbara A. Mikulski Chairman, Committee on Appropriations Chairwoman, Committee on Appropriations U.S. House of Representatives U.S. Senate Washington, DC 20515 Washington, DC 20510 The Honorable Rodney P. Frelinghuysen The Honorable Dianne Feinstein Chairman,

  11. Technology Pathway Selection Effort

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BIOMASS PROGRAM Technology Pathway Selection Effort Alicia Lindauer 27 November 2012 2 | Biomass Program eere.energy.gov * Setting R&D priorities * Benchmarking * Informing multi-sectoral analytical activities * Track Program R&D progress against goals * Identify technology process routes and prioritize funding * Program direction decisions: * Are we spending our money on the right technology pathways? * Within a pathway: Are we focusing our funding on the highest priority activities?

  12. Energy Department Selects Partners...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selects Partners to Bridge Old and New Corn Ethanol Technology Efforts For more information contact: e:mail: Public Affairs Golden, Colo., Feb. 24, 1999 — The U.S. Department of Energy (DOE) today announced grant recipients in its "Bridge to the Corn Ethanol Industry" initiative which will help connect the established corn ethanol industry and the newer technologies that produce ethanol from agricultural and forest wastes and other types of biomass. Six partnerships totaling $1

  13. PRINCIPAL ISOTOPE SELECTION REPORT

    SciTech Connect (OSTI)

    K. D. Wright

    1998-08-28

    Utilizing nuclear fuel to produce power in commercial reactors results in the production of hundreds of fission product and transuranic isotopes in the spent nuclear fuel (SNF). When the SNF is disposed of in a repository, the criticality analyses could consider all of the isotopes, some principal isotopes affecting criticality, or none of the isotopes, other than the initial loading. The selected set of principal isotopes will be the ones used in criticality analyses of the SNF to evaluate the reactivity of the fuel/waste package composition and configuration. This technical document discusses the process used to select the principal isotopes and the possible affect that these isotopes could have on criticality in the SNF. The objective of this technical document is to discuss the process used to select the principal isotopes for disposal criticality evaluations with commercial SNF. The principal isotopes will be used as supporting information in the ''Disposal Criticality Analysis Methodology Topical Report'' which will be presented to the United States Nuclear Regulatory Commission (NRC) when approved by the United States Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM).

  14. Selective ion source

    DOE Patents [OSTI]

    Leung, Ka-Ngo

    1996-01-01

    A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P.sup.+ from PH.sub.3. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P.sup.+, AS.sup.+, and B.sup.+ without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices.

  15. Selective ion source

    DOE Patents [OSTI]

    Leung, K.N.

    1996-05-14

    A ion source is described wherein selected ions maybe extracted to the exclusion of unwanted ion species of higher ionization potential. Also described is a method of producing selected ions from a compound, such as P{sup +} from PH{sub 3}. The invention comprises a plasma chamber, an electron source, a means for introducing a gas to be ionized by electrons from the electron source, means for limiting electron energy from the electron source to a value between the ionization energy of the selected ion species and the greater ionization energy of an unwanted ion specie, and means for extracting the target ion specie from the plasma chamber. In one embodiment, the electrons are generated in a plasma cathode chamber immediately adjacent to the plasma chamber. A small extractor draws the electrons from the plasma cathode chamber into the relatively positive plasma chamber. The energy of the electrons extracted in this manner is easily controlled. The invention is particularly useful for doping silicon with P{sup +}, As{sup +}, and B{sup +} without the problematic presence of hydrogen, helium, water, or carbon oxide ions. Doped silicon is important for manufacture of semiconductors and semiconductor devices. 6 figs.

  16. Fukushima Daiichi unit 1 uncertainty analysis--Preliminary selection of uncertain parameters and analysis methodology

    SciTech Connect (OSTI)

    Cardoni, Jeffrey N.; Kalinich, Donald A.

    2014-02-01

    Sandia National Laboratories (SNL) plans to conduct uncertainty analyses (UA) on the Fukushima Daiichi unit (1F1) plant with the MELCOR code. The model to be used was developed for a previous accident reconstruction investigation jointly sponsored by the US Department of Energy (DOE) and Nuclear Regulatory Commission (NRC). However, that study only examined a handful of various model inputs and boundary conditions, and the predictions yielded only fair agreement with plant data and current release estimates. The goal of this uncertainty study is to perform a focused evaluation of uncertainty in core melt progression behavior and its effect on key figures-of-merit (e.g., hydrogen production, vessel lower head failure, etc.). In preparation for the SNL Fukushima UA work, a scoping study has been completed to identify important core melt progression parameters for the uncertainty analysis. The study also lays out a preliminary UA methodology.

  17. Hydroprocess catalyst selection

    SciTech Connect (OSTI)

    Adams, C.T.; DelPaggio, A.A. ); Schaper, H.; Stork, W.H.J. . Lab.); Shiflett, W.K. )

    1989-09-01

    Flexibility in residuum hydroprocessing becomes a requirement as fuel oil demand weakens, crude slates tend to be heavier, and variability in crude oil cost and supply become the norm. One means of providing flexibility is to incorporate residuum hydrotreating ahead of a heavy oil catalytic cracking unit which converts heavier components into lighter, more valuable products. Alternatively, significant conversion of the residuum to lighter products can be achieved by the operation of the residuum hydrotreater at a higher severity to facilitate hydrocracking reactions. This paper focuses on the design and selection of catalytic systems in the framework of a unified reactor modeling scheme for such residuum hydroprocessing applications.

  18. Simplifying steam trap selection

    SciTech Connect (OSTI)

    Debat, R.J. )

    1994-01-01

    In the current economic world order, there is an obligation to eliminate waste and conserve economic and natural resources. One trap blowing 100-lb of steam through a 1/4-in. orifice can cost more than $12,000 a year in wasted energy. Richard J. Debat of Armstrong International, Inc. explains the operating principles of the four basic types of steam traps as the first step in simplifying the selection process so the right trap can be specified for a given application.

  19. Selecting chemical treatment programs

    SciTech Connect (OSTI)

    Miller, J.E. )

    1988-09-01

    Many process equipment performance and reliability problems can be solved economically by the proper selection and application of chemical treatment programs. It is important to choose an experienced chemical vendor and to work closely with the vendor to develop a good chemical treatment program. This requires devoting sufficient manpower to ensure that the treatment program development is thorough and timely. After the treatment program is installed, the system operation and performance should be routinely monitored to ensure that expected benefits are achieved and unexpected problems do not develop.

  20. Hydrogen-selective membrane

    DOE Patents [OSTI]

    Collins, John P.; Way, J. Douglas

    1997-01-01

    A hydrogen-selective membrane comprises a tubular porous ceramic support having a palladium metal layer deposited on an inside surface of the ceramic support. The thickness of the palladium layer is greater than about 10 .mu.m but typically less than about 20 .mu.m. The hydrogen permeation rate of the membrane is greater than about 1.0 moles/m.sup.2. s at a temperature of greater than about 500.degree. C. and a transmembrane pressure difference of about 1,500 kPa. Moreover, the hydrogen-to-nitrogen selectivity is greater than about 600 at a temperature of greater than about 500.degree. C. and a transmembrane pressure of about 700 kPa. Hydrogen can be separated from a mixture of gases using the membrane. The method may include the step of heating the mixture of gases to a temperature of greater than about 400.degree. C. and less than about 1000.degree. C. before the step of flowing the mixture of gases past the membrane. The mixture of gases may include ammonia. The ammonia typically is decomposed to provide nitrogen and hydrogen using a catalyst such as nickel. The catalyst may be placed inside the tubular ceramic support. The mixture of gases may be supplied by an industrial process such as the mixture of exhaust gases from the IGCC process.

  1. Hydrogen-Selective Membrane

    DOE Patents [OSTI]

    Collins, John P.; Way, J. Douglas

    1995-09-19

    A hydrogen-selective membrane comprises a tubular porous ceramic support having a palladium metal layer deposited on an inside surface of the ceramic support. The thickness of the palladium layer is greater than about 10 .mu.m but typically less than about 20 .mu.m. The hydrogen permeation rate of the membrane is greater than about 1.0 moles/m.sup.2.s at a temperature of greater than about 500.degree. C. and a transmembrane pressure difference of about 1,500 kPa. Moreover, the hydrogen-to-nitrogen selectivity is greater than about 600 at a temperature of greater than about 500.degree. C. and a transmembrane pressure of about 700 kPa. Hydrogen can be separated from a mixture of gases using the membrane. The method may include the step of heating the mixture of gases to a temperature of greater than about 400.degree. C. and less than about 1000.degree. C. before the step of flowing the mixture of gases past the membrane. The mixture of gases may include ammonia. The ammonia typically is decomposed to provide nitrogen and hydrogen using a catalyst such as nickel. The catalyst may be placed inside the tubular ceramic support. The mixture of gases may be supplied by an industrial process such as the mixture of exhaust gases from the IGCC process.

  2. Hydrogen-selective membrane

    DOE Patents [OSTI]

    Collins, J.P.; Way, J.D.

    1997-07-29

    A hydrogen-selective membrane comprises a tubular porous ceramic support having a palladium metal layer deposited on an inside surface of the ceramic support. The thickness of the palladium layer is greater than about 10 {micro}m but typically less than about 20 {micro}m. The hydrogen permeation rate of the membrane is greater than about 1.0 moles/m{sup 2} s at a temperature of greater than about 500 C and a transmembrane pressure difference of about 1,500 kPa. Moreover, the hydrogen-to-nitrogen selectivity is greater than about 600 at a temperature of greater than about 500 C and a transmembrane pressure of about 700 kPa. Hydrogen can be separated from a mixture of gases using the membrane. The method may include the step of heating the mixture of gases to a temperature of greater than about 400 C and less than about 1000 C before the step of flowing the mixture of gases past the membrane. The mixture of gases may include ammonia. The ammonia typically is decomposed to provide nitrogen and hydrogen using a catalyst such as nickel. The catalyst may be placed inside the tubular ceramic support. The mixture of gases may be supplied by an industrial process such as the mixture of exhaust gases from the IGCC process. 9 figs.

  3. Hydrogen-selective membrane

    DOE Patents [OSTI]

    Collins, J.P.; Way, J.D.

    1995-09-19

    A hydrogen-selective membrane comprises a tubular porous ceramic support having a palladium metal layer deposited on an inside surface of the ceramic support. The thickness of the palladium layer is greater than about 10 {micro}m but typically less than about 20 {micro}m. The hydrogen permeation rate of the membrane is greater than about 1.0 moles/m{sup 2}s at a temperature of greater than about 500 C and a transmembrane pressure difference of about 1,500 kPa. Moreover, the hydrogen-to-nitrogen selectivity is greater than about 600 at a temperature of greater than about 500 C and a transmembrane pressure of about 700 kPa. Hydrogen can be separated from a mixture of gases using the membrane. The method may include the step of heating the mixture of gases to a temperature of greater than about 400 C and less than about 1000 C before the step of flowing the mixture of gases past the membrane. The mixture of gases may include ammonia. The ammonia typically is decomposed to provide nitrogen and hydrogen using a catalyst such as nickel. The catalyst may be placed inside the tubular ceramic support. The mixture of gases may be supplied by an industrial process such as the mixture of exhaust gases from the IGCC process. 9 figs.

  4. Selectable fragmentation warhead

    SciTech Connect (OSTI)

    Bryan, C.S.; Paisley, D.L.; Montoya, N.I.; Stahl, D.B.

    1993-07-20

    A selectable fragmentation warhead is described comprising: a case having proximal and distal ends; a fragmenting plate mounted in said distal end of said casing; first explosive means cast adjacent to said fragmenting plate for creating a predetermined number of fragments from said fragmenting plate; three or more first laser-driven slapper detonators located adjacent to said first explosive means for detonating said first explosive means in a predetermined pattern; smoother-disk means located adjacent to said first means for accelerating said fragments; second explosive means cast adjacent to said smoother-disk means for further accelerating said fragments; at least one laser-driven slapper detonators located in said second explosive means; a laser located in said proximal end of said casing; optical fibers connecting said laser to said first and second laser-driven slapper detonators; and optical switch means located in series with said optical fibers connected to said plurality of first laser-driven slapper detonators for blocking or passing light from said laser to said plurality of first laser-driven slapper detonators.

  5. DOE Selections | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Financial Opportunities » DOE Selections DOE Selections The U.S. Department of Energy awards research grants targeting advances in solid-state lighting. The following links provide information on the recipients of these grants and summaries of the research projects they are undertaking. DOE Announces Selections For SSL R&D Funding Opportunity Three SBIR Grants Awarded for SSL Technology (FY16 Phase I Release 2) Two SBIR Grants Awarded for SSL Technology (FY16 Phase II Release 1) Six

  6. Multiprocessor switch with selective pairing

    SciTech Connect (OSTI)

    Gara, Alan; Gschwind, Michael K; Salapura, Valentina

    2014-03-11

    System, method and computer program product for a multiprocessing system to offer selective pairing of processor cores for increased processing reliability. A selective pairing facility is provided that selectively connects, i.e., pairs, multiple microprocessor or processor cores to provide one highly reliable thread (or thread group). Each paired microprocessor or processor cores that provide one highly reliable thread for high-reliability connect with a system components such as a memory "nest" (or memory hierarchy), an optional system controller, and optional interrupt controller, optional I/O or peripheral devices, etc. The memory nest is attached to a selective pairing facility via a switch or a bus

  7. Reaction Selectivity in Heterogeneous Catalysis

    SciTech Connect (OSTI)

    Somorjai, Gabor A.; Kliewer, Christopher J.

    2009-02-02

    The understanding of selectivity in heterogeneous catalysis is of paramount importance to our society today. In this review we outline the current state of the art in research on selectivity in heterogeneous catalysis. Current in-situ surface science techniques have revealed several important features of catalytic selectivity. Sum frequency generation vibrational spectroscopy has shown us the importance of understanding the reaction intermediates and mechanism of a heterogeneous reaction, and can readily yield information as to the effect of temperature, pressure, catalyst geometry, surface promoters, and catalyst composition on the reaction mechanism. DFT calculations are quickly approaching the ability to assist in the interpretation of observed surface spectra, thereby making surface spectroscopy an even more powerful tool. HP-STM has revealed three vitally important parameters in heterogeneous selectivity: adsorbate mobility, catalyst mobility, and selective site-blocking. The development of size controlled nanoparticles from 0.8 to 10 nm, of controlled shape, and of controlled bimetallic composition has revealed several important variables for catalytic selectivity. Lastly, DFT calculations may be paving the way to guiding the composition choice for multi-metallic heterogeneous catalysis for the intelligent design of catalysts incorporating the many factors of selectivity we have learned.

  8. Triazaspirodimethoxybenzoyls as Selective Inhibitors of Mycobacterial...

    Office of Scientific and Technical Information (OSTI)

    Triazaspirodimethoxybenzoyls as Selective Inhibitors of Mycobacterial Lipoamide Dehydrogenase Citation Details In-Document Search Title: Triazaspirodimethoxybenzoyls as Selective ...

  9. Ion selectivity of graphene nanopores

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Rollings, Ryan C.; Kuan, Aaron T.; Golovchenko, Jene A.

    2016-04-22

    As population growth continues to outpace development of water infrastructure in many countries, desalination (the removal of salts from seawater) at high energy efficiency will likely become a vital source of fresh water. Due to its atomic thinness combined with its mechanical strength, porous graphene may be particularly well-suited for electrodialysis desalination, in which ions are removed under an electric field via ion-selective pores. Here, we show that single graphene nanopores preferentially permit the passage of K+ cations over Cl- anions with selectivity ratios of over 100 and conduct monovalent cations up to 5 times more rapidly than divalent cations.more » Furthermore, the observed K+/Cl- selectivity persists in pores even as large as about 20 nm in diameter, suggesting that high throughput, highly selective graphene electrodialysis membranes can be fabricated without the need for subnanometer control over pore size.« less

  10. Maps of Selected State Subdivisions

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves Summary Maps of Selected State Subdivisions Map 1: Alaska Map 2: California Map 3: Louisiana Map 4: New Mexico Map ...

  11. Gasification Systems 2013 Project Selections

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Department of Energy in 2013 selected ten projects that will focus on reducing the cost of gasification with carbon capture for producing electric power, fuels, and chemicals. The projects will...

  12. Carlsbad Field Office Manager Selected

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Carlsbad Field Office Manager Selected CARLSBAD, N.M., November 10, 2011 - The U.S. Department of Energy's (DOE) Richland Operations Office (RL) Assistant Manager for the River Corridor Joe Franco was selected as Manager for the Carlsbad Field Office (CBFO), which oversees the Waste Isolation Pilot Plant (WIPP). CBFO Deputy Manager Ed Ziemianski has been acting in the CBFO Manager's position for the past year and will continue to serve as Deputy Manager. In operation since 1999, WIPP is a DOE

  13. II"ve

    Office of Legacy Management (LM)

    regarding major licensing and enforcement proceedings undertaken by NRC on their web page. The availability of this information provides opportunities for members of the...

  14. VE-Suite

    Energy Science and Technology Software Center (OSTI)

    2006-10-01

    an open source virtual engineering software toolkit that simplifies information management so users can simultaneously interact with engineering analyses and graphical models to create a virtual decision-making environment.

  15. Pump Selection Considerations | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selection Considerations Pump Selection Considerations This tip sheet outlines important pump selection considerations, including fluid properties and pumping system end use requirements. PUMPING SYSTEMS TIP SHEET #2 Pump Selection Considerations (October 2005) (199.99 KB) More Documents & Publications Select an Energy-Efficient Centrifugal Pump Pumping System Assessment Tool Overview Conduct an In-Plant Pumping System Survey

  16. Method for discriminative particle selection

    DOE Patents [OSTI]

    Post, Richard F.

    1992-01-01

    The invention is a method and means for separating ions or providing an ion beam. The invention generates ions of the isotopes to be separated, and then provides a traveling electric potential hill created by a sequential series of quasi static electric potential hills. By regulating the velocity and potential amplitude of the traveling electric potential hill ionized isotopes are selectively positively or negatively accelerated. Since the ionized isotopes have differing final velocities, the isotopes may be collected separately or used to produce an ion beam of a selected isotope.

  17. Selecting a new water heater

    SciTech Connect (OSTI)

    1995-03-01

    This fact sheet describes the types of water heaters available (storage water heaters, demand water heaters, heat pump water heaters, tankless coil and indirect water heaters, and solar water heaters). The criteria for selection are discussed. These are capacity, efficiency rating, and cost. A resource list is provided for further information.

  18. Preparation of gas selective membranes

    DOE Patents [OSTI]

    Kulprathipanja, S.; Kulkarni, S.S.; Funk, E.W.

    1988-06-14

    Gas separation membranes which possess improved characteristics as exemplified by selectivity and flux may be prepared by coating a porous organic polymer support with a solution or emulsion of a plasticizer and an organic polymer, said coating being effected at subatmospheric pressures in order to increase the penetration depth of the coating material.

  19. Preparation of gas selective membranes

    DOE Patents [OSTI]

    Kulprathipanja, Santi; Kulkarni, Sudhir S.; Funk, Edward W.

    1988-01-01

    Gas separation membranes which possess improved characteristics as exemplified by selectivity and flux may be prepared by coating a porous organic polymer support with a solution or emulsion of a plasticizer and an organic polymer, said coating being effected at subatmospheric pressures in order to increase the penetration depth of the coating material.

  20. Random Selection for Drug Screening

    SciTech Connect (OSTI)

    Center for Human Reliability Studies

    2007-05-01

    Simple random sampling is generally the starting point for a random sampling process. This sampling technique ensures that each individual within a group (population) has an equal chance of being selected. There are a variety of ways to implement random sampling in a practical situation.

  1. Tetrahydroquinoline Derivatives as Potent and Selective Factor...

    Office of Scientific and Technical Information (OSTI)

    as Potent and Selective Factor XIa Inhibitors Citation Details In-Document Search Title: Tetrahydroquinoline Derivatives as Potent and Selective Factor XIa Inhibitors Authors: ...

  2. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers A Spintronic Semiconductor with Selectable Charge Carriers Print Wednesday, 28 August 2013 00:00 Accentuating the ...

  3. Source Selection Guide | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Source Selection Guide PDF icon Source Selection Guide More Documents & Publications Acquisition Guide Chapter 50.1- Extraordinary Contractual Actions (January 2009) Chapter...

  4. Implications of structural genomics target selection strategies...

    Office of Scientific and Technical Information (OSTI)

    target selection strategies: Pfam5000, whole genome, and random approaches Citation Details In-Document Search Title: Implications of structural genomics target selection ...

  5. Materials Selection Considerations for Thermal Process Equipment...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials Selection Considerations for Thermal Process Equipment: A BestPractices Process Heating Technical Brief Materials Selection Considerations for Thermal Process Equipment: ...

  6. Degradation Mechanisms of Urea Selective Catalytic Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Degradation Mechanisms of Urea Selective Catalytic Reduction Technology Deactivation Mechanisms of Base MetalZeolite Urea Selective Catalytic Reduction Materials

  7. Selective Service Registration | Department of Energy

    Office of Environmental Management (EM)

    Selective Service Registration Selective Service Registration (19.13 KB) More Documents & Publications Employee In-Processing Forms New Employee Orientation - Forms Checklist NTSF ...

  8. Energy Department Selects Projects to Demonstrate Feasibility...

    Energy Savers [EERE]

    Selects Projects to Demonstrate Feasibility of Producing Usable Water from CO2 Storage Sites Energy Department Selects Projects to Demonstrate Feasibility of Producing Usable Water ...

  9. Thomas selected as American Chemical Society Fellow

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thomas selected as ACS Fellow Thomas selected as American Chemical Society Fellow Kimberly ... first Los Alamos researcher to be named a Fellow of the American Chemical Society (ACS). ...

  10. Selected Past Financial Awards | Department of Energy

    Office of Environmental Management (EM)

    Financial Opportunities Past Opportunities Selected Past Financial Awards Selected Past Financial Awards Since 2003, DOE has awarded funding to a number of science and ...

  11. New human resources division leader selected

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    New Human Resources division leader selected New human resources division leader selected Donna J. Hampton has been named the new Human Resources Division leader. March 15, 2011 ...

  12. Selection of windmill and site

    SciTech Connect (OSTI)

    Takeuchi, T.

    1980-01-01

    There are various types of windmills: horizontal, vertical, shaft, hybrid and others. Their merits and demerits were investigated to provide information for the selection of windmills and their design. Multi-wing types are suited to drive pumps, and propeller types are suited for wind-power generation. Since the wind varies in time with respect to its speed and direction, a windmill of any type should be controlled in rotation speed and/or direction. To realize this, auxiliary blades or other wind speed or direction detectors are combined with controllers of the windmills. Propeller-type and Darrieus-type wind-power generator systems were designed (including adequate power generators, power-transmission mechanisms, towers and foundations). Various factors involved in the selection of the site are given in addition to geographical investigations. 5 references.

  13. Selected Recent Publications and Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications Selected Recent Publications and Presentations Sort by: Date | Author | Type 2016 Michael A. Purvis, Alexander Schafgans, Daniel J. W. Brown, Igor Fomenkov, Rob Rafac, Josh Brown, Yezheng Tao, Slava Rokitski, Mathew Abraham, Mike Vargas, Spencer Rich, Ted Taylor, David Brandt, Alberto Pirati, Aaron Fisher, Howard Scott, Alice Koniges, David Eder, Scott Wilks, Anthony Link, Steven Langer, "Advancements in predictive plasma formation modeling", Proc. SPIE 9776, Extreme

  14. Considerations When Selecting a Condensing Economizer

    Broader source: Energy.gov [DOE]

    This tip sheet lays out considerations when selecting condensing economizers as part of optimized steam systems.

  15. Selective poly-N-substituted glycine antibiotics

    DOE Patents [OSTI]

    Barron, Annelise E; Czyzewski, Ann M; Dohm, Michelle T; Miller, Tyler M; Zuckermann, Tyler M; Patch, James A; Chongsiriwatana, Nathaniel P

    2013-05-21

    Antimicrobial peptoid compounds and related compositions as can be used against bacteria effectively and selectively.

  16. Best Practices for ECM Selection

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FPL Best Practices for ECM Selection Ed Anderson, PE May 18, 2016 Hosted by: FEDERAL UTILITY PARTNERSHIP WORKING GROUP SEMINAR May 18-19, 2016 Cincinnati, OH Federal Utility Partnership Working Group May 18-19, 2016 Cincinnati, OH DAVE Federal Utility Partnership Working Group May 18-19, 2016 Cincinnati, OH Federal Utility Partnership Working Group May 18-19, 2016 Cincinnati, OH FPL Fun Facts Federal Utility Partnership Working Group May 18-19, 2016 Cincinnati, OH * Part of the NextEra Energy

  17. Maps of Selected State Subdivisions

    U.S. Energy Information Administration (EIA) Indexed Site

    Crude Oil, Natural Gas, and Natural Gas Liquids Proved Reserves Summary Maps of Selected State Subdivisions Map 1: Alaska Map 2: California Map 3: Louisiana Map 4: New Mexico Map 5: Texas Map 6: Western Planning Area, Gulf of Mexico Map 7: Central Planning Area, Gulf of Mexico Map 8: Eastern Planning Area, Gulf of Mexico Map 1: Alaska AK 50 - North Onshore and Offshore AK 10 - South Onshore AK 05 - South State Offshore AK 00 - South Federal Offshore Map 2: California CA 50 - Coastal Region

  18. MIS-based sensors with hydrogen selectivity

    DOE Patents [OSTI]

    Li; ,Dongmei; Medlin, J. William; McDaniel, Anthony H.; Bastasz, Robert J.

    2008-03-11

    The invention provides hydrogen selective metal-insulator-semiconductor sensors which include a layer of hydrogen selective material. The hydrogen selective material can be polyimide layer having a thickness between 200 and 800 nm. Suitable polyimide materials include reaction products of benzophenone tetracarboxylic dianhydride 4,4-oxydianiline m-phenylene diamine and other structurally similar materials.

  19. Hydrogen Selective Exfoliated Zeolite Membranes

    SciTech Connect (OSTI)

    Tsapatsis, Michael; Daoutidis, Prodromos; Elyassi, Bahman; Lima, Fernando; Iyer, Aparna; Agrawal, Kumar; Sabnis, Sanket

    2015-04-06

    The objective of this project was to develop and evaluate an innovative membrane technology at process conditions that would be representative of Integrated Gasification Combined Cycle (IGCC) advanced power generation with pre-combustion capture of carbon dioxide (CO2). This research focused on hydrogen (H2)-selective zeolite membranes that could be utilized to separate conditioned syngas into H2-rich and CO2-rich components. Both experiments and process design and optimization calculations were performed to evaluate the concept of ultra-thin membranes made from zeolites nanosheets. In this work, efforts in the laboratory were made to tackle two fundamental challenges in application of zeolite membranes in harsh industrial environments, namely, membrane thickness and membrane stability. Conventional zeolite membranes have thicknesses in the micron range, limiting their performance. In this research, we developed a method for fabrication of ultimately thin zeolite membranes based on zeolite nanosheets. A range of layered zeolites (MWW, RWR, NSI structure types) suitable for hydrogen separation was successfully exfoliated to their constituent nanosheets. Further, membranes were made from one of these zeolites, MWW, to demonstrate the potential of this group of materials. Moreover, long-term steam stability of these zeolites (up to 6 months) was investigated in high concentrations of steam (35 mol% and 95 mole%), high pressure (10 barg), and high temperatures (350 °C and 600 °C) relevant to conditions of water-gas-shift and steam methane reforming reactions. It was found that certain nanosheets are stable, and that stability depends on the concentration of structural defects. Additionally, models that represent a water-gas-shift (WGS) membrane reactor equipped with the zeolite membrane were developed for systems studies. These studies had the aim of analyzing the effect of the membrane reactor integration into IGCC plants

  20. High temperature solar selective coatings

    DOE Patents [OSTI]

    Kennedy, Cheryl E

    2014-11-25

    Improved solar collectors (40) comprising glass tubing (42) attached to bellows (44) by airtight seals (56) enclose solar absorber tubes (50) inside an annular evacuated space (54. The exterior surfaces of the solar absorber tubes (50) are coated with improved solar selective coatings {48} which provide higher absorbance, lower emittance and resistance to atmospheric oxidation at elevated temperatures. The coatings are multilayered structures comprising solar absorbent layers (26) applied to the meta surface of the absorber tubes (50), typically stainless steel, topped with antireflective Savers (28) comprising at least two layers 30, 32) of refractory metal or metalloid oxides (such as titania and silica) with substantially differing indices of refraction in adjacent layers. Optionally, at least one layer of a noble metal such as platinum can be included between some of the layers. The absorbent layers cars include cermet materials comprising particles of metal compounds is a matrix, which can contain oxides of refractory metals or metalloids such as silicon. Reflective layers within the coating layers can comprise refractory metal silicides and related compounds characterized by the formulas TiSi. Ti.sub.3SiC.sub.2, TiAlSi, TiAN and similar compounds for Zr and Hf. The titania can be characterized by the formulas TiO.sub.2, Ti.sub.3O.sub.5. TiOx or TiO.sub.xN.sub.1-x with x 0 to 1. The silica can be at least one of SiO.sub.2, SiO.sub.2x or SiO.sub.2xN.sub.1-x with x=0 to 1.

  1. Award Selections for Industrial Technologies Program Recovery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    A chart detailling Award Selections for Industrial Technologies Program Recovery Act Funding Energy Efficient Information and Communication Technology (ICT) PDF icon Award ...

  2. Beyond Ketonization: Selective Conversion of Carboxylic Acids...

    Office of Scientific and Technical Information (OSTI)

    Title: Beyond Ketonization: Selective Conversion of Carboxylic Acids to Olefins over Balanced Lewis Acid-base Pairs Dwindling petroleum reserves combined with increased energy ...

  3. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive ... Strategies for developing spintronic semiconductors have been based on surface doping or ...

  4. Selecting Your Subcontractors (for the Utility)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    & smalldisadvantaged business requirements * 10 USC 2913 - FOR DOD: Allows direct negotiation with energy savings contractors on project details Selecting Your Subcontractors * ...

  5. Selecting Solar: Insights into Residential Photovoltaic (PV)...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selecting Solar: Insights into Residential Photovoltaic (PV) Quote Variation Carolyn Davidson and Robert Margolis National Renewable Energy Laboratory Technical Report NREL...

  6. Solar Selective Absorption Coatings - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of solar selective absorber coatings that significantly improve the thermal conversion efficiency of solar units by reducing radiative energy losses from the absorbing elements. ...

  7. Bifunctional Catalysts for the Selective Catalytic Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Publications Bifunctional Catalysts for the Selective Catalytic Reduction of NO by Hydrocarbons Selectlive Catalytic Reducution of NOx wilth Diesel-Based Fuels as Reductants...

  8. Enhancements to Natural Attenuation: Selected Case Studies |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Case Studies More Documents & Publications Building C-400 Thermal Treatment 90% Remedial Design Report and Site Investigation Natural and Enhanced Attenuation of Soil ...

  9. ,"Selected National Average Natural Gas Prices"

    U.S. Energy Information Administration (EIA) Indexed Site

    Selected National Average Natural Gas Prices" ,"Click worksheet name or tab at bottom for data" ,"Worksheet Name","Description"," Of Series","Frequency","Latest Data for" ,"Data ...

  10. Bifunctional Catalysts for the Selective Catalytic Reduction...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for the Selective Catalytic Reduction of NO by Hydrocarbons Development of Optimal Catalyst Designs and Operating Strategies for Lean NOx Reduction in Coupled LNT-SCR Systems

  11. Successful Selection of LED Streetlight Luminaires: Optimizing...

    Broader source: Energy.gov (indexed) [DOE]

    This March 6, 2013 webcast reviewed the factors involved in successful selection of LED streetlight luminaires. Presenters Eric Haugaard of Cree Lighting and Chad Stalker of ...

  12. Selective deposition of nanostructured ruthenium oxide using...

    Office of Scientific and Technical Information (OSTI)

    This content will become publicly available on June 5, 2017 Title: Selective deposition of nanostructured ruthenium oxide using Tobacco mosaic virus for micro-supercapacitors in ...

  13. Technology Pathway Selection Effort | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Pathway Selection Effort Technology Pathway Selection Effort This is a presentation from the November 27, 2012, Sustainable Alternative Fuels Cost Workshop given by Alicia Lindauer. lindauer_caafi_workshop.pdf (525.95 KB) More Documents & Publications Conversion Technologies for Advanced Biofuels - Bio-Oil Production 2013 Peer Review Presnentations-Plenaries Thermochemical Conversion Proceeses to Aviation Fuels

  14. Selective purge for hydrogenation reactor recycle loop

    DOE Patents [OSTI]

    Baker, Richard W.; Lokhandwala, Kaaeid A.

    2001-01-01

    Processes and apparatus for providing improved contaminant removal and hydrogen recovery in hydrogenation reactors, particularly in refineries and petrochemical plants. The improved contaminant removal is achieved by selective purging, by passing gases in the hydrogenation reactor recycle loop or purge stream across membranes selective in favor of the contaminant over hydrogen.

  15. Five selected as Los Alamos National Laboratory Fellows

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Years' Points to a Bright Future of High-impact Discovery at LCLS | Department of Energy Five Ways SLAC's X-ray Laser Can Change the Way We Live: 'The First Five Years' Points to a Bright Future of High-impact Discovery at LCLS Five Ways SLAC's X-ray Laser Can Change the Way We Live: 'The First Five Years' Points to a Bright Future of High-impact Discovery at LCLS March 11, 2016 - 11:29am Addthis News release from SLAC National Accelerator Laboratory, March 9, 2016 If you've ever stood in a

  16. Process for selecting engineering tools : applied to selecting a SysML tool.

    SciTech Connect (OSTI)

    De Spain, Mark J.; Post, Debra S.; Taylor, Jeffrey L.; De Jong, Kent

    2011-02-01

    Process for Selecting Engineering Tools outlines the process and tools used to select a SysML (Systems Modeling Language) tool. The process is general in nature and users could use the process to select most engineering tools and software applications.

  17. Energy Department Announces Project Selections for Enhanced Geothermal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Announces Project Selections for Enhanced Geothermal Systems (EGS) Subsurface Laboratory Energy Department Announces Project Selections for Enhanced Geothermal Systems (EGS) ...

  18. Catalyst selection important for residuum hydroprocessing

    SciTech Connect (OSTI)

    Howell, R.L.; Chen, H.C.; Gibson, K.R.; Hung, C.

    1985-07-29

    The authors examine the effective hydro-processing of residuum from heavy crude oils, through proper catalyst selection. Utilizing proper catalyst selection and application can make residuum hydroprocessing an attractive process route to lighter products, allowing flexibility to handle a wide range of feedstock properties. Chevron has analyzed the important catalyst properties and how they affect catalyst selection for, and catalyst application to, different residuum processing routes to transportation fuels. They have also examined the role of hydroprocessing in those routes. Data were obtained from commercial operation in Chevron's Richmond, Calif., and Pascagoula, Miss., refineries.

  19. Selective catalyst reduction light-off strategy

    DOE Patents [OSTI]

    Gonze, Eugene V [Pinckney, MI

    2011-10-18

    An emissions control system includes a temperature determination module and an emissions control module. The temperature determination module determines a first temperature of a heater element of a diesel particulate filter (DPF) assembly in an exhaust system and determines a second temperature of a catalyst of the DPF assembly. The emissions control module selectively activates the heater element, selectively initiates a predefined combustion process in an engine based upon the first temperature, and selectively starts a reductant injection process based upon the second temperature.

  20. Surface selective membranes for carbon dioxide separation

    SciTech Connect (OSTI)

    Luebke, D.R.; Pennline, H.W.; Myers, C.R.

    2005-09-01

    In this study, hybrid membranes have been developed for the selective separation of CO2 from mixtures containing H2. Beginning with commercially available Pall alumina membrane tubes with nominal pore diameter of 5 nm, hybrids were produced by silation with a variety of functionalities designed to facilitate the selective adsorption of CO2 onto the pore surface. The goal is to produce a membrane which can harness the power of surface diffusion to give the selectivity of polymer membranes with the permeance of inorganic membranes.

  1. Industrial Carbon Capture Project Selections | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Industrial Carbon Capture Project Selections Industrial Carbon Capture Project Selections Industrial Carbon Capture Project Selections September 2, 2010 These projects have been selected for negotiation of awards; final award amounts may vary. Industrial Carbon Capture Project Selections (71.28 KB) More Documents & Publications ICCS_Project_Selections.pdf CCSTF - Final Report Before the Subcommittee on Energy -- House Science, Space, and Technology Committee

  2. Mesoporous Carbon Membranes for Selective Gas Separations

    SciTech Connect (OSTI)

    2009-04-01

    This factsheet describes a study whose focus is on translating a novel class of material developed at Oak Ridge National Laboratoryselfassembled mesoporous carboninto robust, efficient membrane systems for selective industrial gas separations.

  3. Finding Fingerprints of Selection in Poplar Genomes

    SciTech Connect (OSTI)

    Tuskan, Gerald

    2014-10-02

    Jerry Tuskan of Oak Ridge National Laboratory and the DOE JGI talks about poplar trees as models for selective adaptation to an environment. This video complements a study published ahead online August 24, 2014 in Nature Genetics.

  4. Finding Fingerprints of Selection in Poplar Genomes

    ScienceCinema (OSTI)

    Tuskan, Gerald

    2014-10-28

    Jerry Tuskan of Oak Ridge National Laboratory and the DOE JGI talks about poplar trees as models for selective adaptation to an environment. This video complements a study published ahead online August 24, 2014 in Nature Genetics.

  5. Select Bank Plc | Open Energy Information

    Open Energy Info (EERE)

    Bank Plc Jump to: navigation, search Name: Select Bank Plc Place: Mayfair, England, United Kingdom Zip: W1J 8LQ Sector: Renewable Energy Product: England-based firm that promotes...

  6. NERSC Selects 20 NESAP Code Teams

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Selects 20 NESAP Code Teams NERSC Selects 20 NESAP Code Teams NERSC Exascale Scientific Applications Program projects to launch in Fall 2014 August 25, 2014 Contact: Kathy Kincade, +1 510 495 2124, kkincade@lbl.gov onesandzeros The National Energy Research Scientific Computing Center (NERSC) has accepted 20 projects into the NERSC Exascale Scientific Applications Program (NESAP), a new collaborative effort that partners NERSC, Intel and Cray resources with code teams across the U.S. to prepare

  7. Pole EXpansion and Selected Inversion (PEXSI)

    Energy Science and Technology Software Center (OSTI)

    2014-03-01

    The Pole EXpansion and Selected Inversion method (PEXSI) is a fast method for evaluating certain selected elements of a matrix function. PEXSI is highly scalable on distributed memory parallel machines. For sparse matrices, the PEXSI method can be more efficient than the widely used diagonalization method for evaluating matrix functions, especially when a relatively large number of eigenpairs are needed to be computed in the diagonalization methond

  8. Selective oxoanion separation using a tripodal ligand

    DOE Patents [OSTI]

    Custelcean, Radu; Moyer, Bruce A.; Rajbanshi, Arbin

    2016-02-16

    The present invention relates to urea-functionalized crystalline capsules self-assembled by sodium or potassium cation coordination and by hydrogen-bonding water bridges to selectively encapsulate tetrahedral divalent oxoanions from highly competitive aqueous alkaline solutions and methods using this system for selective anion separations from industrial solutions. The method involves competitive crystallizations using a tripodal tris(urea) functionalized ligand and, in particular, provides a viable approach to sulfate separation from nuclear wastes.

  9. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers A Spintronic Semiconductor with Selectable Charge Carriers Print Wednesday, 28 August 2013 00:00 Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of

  10. Advanced Combustion R&D Selections

    Broader source: Energy.gov [DOE]

    In 2013, the Department of Energy made several project selections under the Fossil Energy Advanced Combustion R&D program. Through these four selections, nearly $37 million, $26 million from the Energy Department and $11 million in cost-share from industry, universities, and other research institutions, are being committed over four years to address CO2 compliance required by the proposed regulations to reduce CO2 emissions.

  11. Progress on solar absorber selective paint research

    SciTech Connect (OSTI)

    Moore, S.W.

    1984-01-01

    A considerable amount of effort has been expended by the Department of Energy (DOE) and by commercial interests to develop solar absorber selective paints; the goal is to develop an inexpensive, durable selective coating that has moderately good optical properties. This report is intended to focus on those research programs monitored by Los Alamos, the research efforts in progress at Los Alamos, durability evaluations, and the progress that has been made toward commercialization.

  12. Santa Fe Community College selects new president

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Santa Fe Community College Selects New President Community Connections: Your link to news and opportunities from Los Alamos National Laboratory Latest Issue: September 1, 2016 all issues All Issues » submit Santa Fe Community College selects new president Santa Fe Community College's new president will be Dr. Ana Margarita "Cha" Guzmán. August 1, 2012 dummy image Read our archives Contacts Editor Linda Anderman Email Community Programs Office Kurt Steinhaus Email Beginning September

  13. Evaluation and Selection of CSES Proposals

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Evaluating, Selecting Proposals Evaluation and Selection of CSES Proposals High quality, cutting-edge science in the areas of astrophysics, space physics, solid planetary geoscience, and climate science. Contact Director Reiner Friedel (505) 665-1936 Email Professional Staff Assistant Georgia D. Sanchez (505) 665-0855 Email Geophysics W. Scott Baldridge (505) 667-4338 Email New student and postdoc proposals All new proposals undergo peer review by scientists in the broad research community who

  14. Paducah WDA Site Selection | Department of Energy

    Energy Savers [EERE]

    Site Selection Paducah WDA Site Selection Five site meet criteria for further consideration Five site meet criteria for further consideration Proposed Sites: Initially, sites were identified that offered the available area required to contain the estimated waste. Twelve sites were identified. After screening criteria were applied, five sites met the Threshold Criteria. Paducah WDA threshold Criteria Considerations included: Wetlands, Power Lines, Land Use, Site Contamination, Tpographical

  15. Companies Selected for Small Wind Turbine Project

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Companies Selected for Small Wind Turbine Project For more information contact: Terry Monrad (303) 972-9246 Golden, Colo., Nov. 27, 1996 -- In an effort to develop cost-effective, low-maintenance wind turbine systems, the Department of Energy's National Renewable Energy Laboratory (NREL) has selected four companies to participate in the Small Wind Turbine Project. The four companies are Windlite Co., Mountain View, Calif.; World Power Technologies, Duluth, Minn.; Cannon/Wind Eagle Corp.,

  16. Optical selection and collection of DNA fragments

    DOE Patents [OSTI]

    Roslaniec, Mary C.; Martin, John C.; Jett, James H.; Cram, L. Scott

    1998-01-01

    Optical selection and collection of DNA fragments. The present invention includes the optical selection and collection of large (>.mu.g) quantities of clonable, chromosome-specific DNA from a sample of chromosomes. Chromosome selection is based on selective, irreversible photoinactivation of unwanted chromosomal DNA. Although more general procedures may be envisioned, the invention is demonstrated by processing chromosomes in a conventional flow cytometry apparatus, but where no droplets are generated. All chromosomes in the sample are first stained with at least one fluorescent analytic dye and bonded to a photochemically active species which can render chromosomal DNA unclonable if activated. After passing through analyzing light beam(s), unwanted chromosomes are irradiated using light which is absorbed by the photochemically active species, thereby causing photoinactivation. As desired chromosomes pass this photoinactivation point, the inactivating light source is deflected by an optical modulator; hence, desired chromosomes are not photoinactivated and remain clonable. The selection and photoinactivation processes take place on a microsecond timescale. By eliminating droplet formation, chromosome selection rates 50 times greater than those possible with conventional chromosome sorters may be obtained. Thus, usable quantities of clonable DNA from any source thereof may be collected.

  17. Selectivity in multiple quantum nuclear magnetic resonance

    SciTech Connect (OSTI)

    Warren, W.S.

    1980-11-01

    The observation of multiple-quantum nuclear magnetic resonance transitions in isotropic or anisotropic liquids is shown to give readily interpretable information on molecular configurations, rates of motional processes, and intramolecular interactions. However, the observed intensity of high multiple-quantum transitions falls off dramatically as the number of coupled spins increases. The theory of multiple-quantum NMR is developed through the density matrix formalism, and exact intensities are derived for several cases (isotropic first-order systems and anisotropic systems with high symmetry) to shown that this intensity decrease is expected if standard multiple-quantum pulse sequences are used. New pulse sequences are developed which excite coherences and produce population inversions only between selected states, even though other transitions are simultaneously resonant. One type of selective excitation presented only allows molecules to absorb and emit photons in groups of n. Coherent averaging theory is extended to describe these selective sequences, and to design sequences which are selective to arbitrarily high order in the Magnus expansion. This theory and computer calculations both show that extremely good selectivity and large signal enhancements are possible.

  18. S.- V'E AT

    Office of Legacy Management (LM)

    ... Particulals 222in daughters attached to airborne dust are col'lected on a membrane filter with a pore size of 0.4 nricrons. A sampling tine of 5-10 minutes and a flow rate of 12-16 ...

  19. NO-VE2008.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Al.: 0707.0926, PRL 98, 231801 (2007) Oscillation search ... to explain the LSND signal in terms of sterile neutrinos. ... with a final state muon enter the e background ...

  20. Beam geometry selection using sequential beam addition

    SciTech Connect (OSTI)

    Popple, Richard A. Brezovich, Ivan A.; Fiveash, John B.

    2014-05-15

    Purpose: The selection of optimal beam geometry has been of interest since the inception of conformal radiotherapy. The authors report on sequential beam addition, a simple beam geometry selection method, for intensity modulated radiation therapy. Methods: The sequential beam addition algorithm (SBA) requires definition of an objective function (score) and a set of candidate beam geometries (pool). In the first iteration, the optimal score is determined for each beam in the pool and the beam with the best score selected. In the next iteration, the optimal score is calculated for each beam remaining in the pool combined with the beam selected in the first iteration, and the best scoring beam is selected. The process is repeated until the desired number of beams is reached. The authors selected three treatment sites, breast, lung, and brain, and determined beam arrangements for up to 11 beams from a pool comprised of 25 equiangular transverse beams. For the brain, arrangements were additionally selected from a pool of 22 noncoplanar beams. Scores were determined for geometries comprised equiangular transverse beams (EQA), as well as two tangential beams for the breast case. Results: In all cases, SBA resulted in scores superior to EQA. The breast case had the strongest dependence on beam geometry, for which only the 7-beam EQA geometry had a score better than the two tangential beams, whereas all SBA geometries with more than two beams were superior. In the lung case, EQA and SBA scores monotonically improved with increasing number of beams; however, SBA required fewer beams to achieve scores equivalent to EQA. For the brain case, SBA with a coplanar pool was equivalent to EQA, while the noncoplanar pool resulted in slightly better scores; however, the dose-volume histograms demonstrated that the differences were not clinically significant. Conclusions: For situations in which beam geometry has a significant effect on the objective function, SBA can identify

  1. Lubricant selection criteria and the tribological system

    SciTech Connect (OSTI)

    Lauer, D.A.

    1995-07-01

    Before the proper lubricant selection can be made, the tribological system must be identified to its fullest extent. This system includes the type of motion, speeds, temperatures, loads and the environment that is specific to the application. Once these parameters are identified, lubrication engineers or tribo-engineers can use their knowledge of the different lubricant chemistries to make a lubricant selection that will optimize the performance of the application. In addition to lubricant chemistry knowledge, the lubrication engineer also must analyze the application based on the identified tribological system. This analysis includes such topics as speed factors, elastohydrodynamic lubrication, extreme pressure lubrication, emergency lubrication and various special application requirements.

  2. Climate selection and development of climate indicators

    SciTech Connect (OSTI)

    Bowen, W.M.; Moreno, S.; Olsen, A.R.

    1982-09-01

    A climate analysis procedure for selecting climate locations which would represent the variation in climate conditions throughout the United States is documented. Separate energy analysis projects for three building categories were to use the results of the climate location project. The categories are: commercial buildings (including multifamily residences), single family residences, and mobile homes. The overall objectives, approach, and method used for all three categories are presented, then the specific application of the general method to each building category is discussed. Climate selection results, conclusions, recommendations, and limits for each building category are presented within the description of the application of the method for that category. (LEW)

  3. Selective Sorbents For Purification Of Hydrocarbons

    DOE Patents [OSTI]

    Yang, Ralph T.; Yang, Frances H.; Takahashi, Akira; Hernandez-Maldonado, Arturo J.

    2006-04-18

    A method for removing thiophene and thiophene compounds from liquid fuel includes contacting the liquid fuel with an adsorbent which preferentially adsorbs the thiophene and thiophene compounds. The adsorption takes place at a selected temperature and pressure, thereby producing a non-adsorbed component and a thiophene/thiophene compound-rich adsorbed component. The adsorbent includes either a metal or a metal ion that is adapted to form p-complexation bonds with the thiophene and/or thiophene compounds, and the preferential adsorption occurs by p-complexation. A further method includes selective removal of aromatic compounds from a mixture of aromatic and aliphatic compounds.

  4. Selective sorbents for purification of hydrocarbons

    DOE Patents [OSTI]

    Yang, Ralph T.; Yang, Frances H.; Takahashi, Akira; Hernandez-Maldonado, Arturo J.

    2006-05-30

    A method for removing thiophene and thiophene compounds from liquid fuel includes contacting the liquid fuel with an adsorbent which preferentially adsorbs the thiophene and thiophene compounds. The adsorption takes place at a selected temperature and pressure, thereby producing a non-adsorbed component and a thiophene/thiophene compound-rich adsorbed component. The adsorbent includes either a metal or a metal cation that is adapted to form .pi.-complexation bonds with the thiophene and/or thiophene compounds, and the preferential adsorption occurs by .pi.-complexation. A further method includes selective removal of aromatic compounds from a mixture of aromatic and aliphatic compounds.

  5. Selective sorbents for purification of hydrocartons

    DOE Patents [OSTI]

    Yang, Ralph T.; Yang, Frances H.; Takahashi, Akira; Hermandez-Maldonado, Arturo J.

    2006-12-12

    A method for removing thiophene and thiophene compounds from liquid fuel includes contacting the liquid fuel with an adsorbent which preferentially adsorbs the thiophene and thiophene compounds. The adsorption takes place at a selected temperature and pressure, thereby producing a non-adsorbed component and a thiophene/thiophene compound-rich adsorbed component. The adsorbent includes either a metal or a metal ion that is adapted to form .pi.-complexation bonds with the thiophene and/or thiophene compounds, and the preferential adsorption occurs by .pi.-complexation. A further method includes selective removal of aromatic compounds from a mixture of aromatic and aliphatic compounds.

  6. Selective sorbents for purification of hydrocarbons

    DOE Patents [OSTI]

    Yang, Ralph T.; Hernandez-Maldonado, Arturo J.; Yang, Frances H.; Takahashi, Akira

    2006-08-22

    A method for removing thiophene and thiophene compounds from liquid fuel includes contacting the liquid fuel with an adsorbent which preferentially adsorbs the thiophene and thiophene compounds. The adsorption takes place at a selected temperature and pressure, thereby producing a non-adsorbed component and a thiophene/thiophene compound-rich adsorbed component. The adsorbent includes either a metal or a metal cation that is adapted to form .pi.-complexation bonds with the thiophene and/or thiophene compounds, and the preferential adsorption occurs by .pi.-complexation. A further method includes selective removal of aromatic compounds from a mixture of aromatic and aliphatic compounds.

  7. ICCS_Project_Selections.pdf | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ICCS_Project_Selections.pdf ICCS_Project_Selections.pdf (265.33 KB) More Documents & Publications Industrial Carbon Capture Project Selections CCSTF - Final Report Before the Subcommittee on Energy -- House Science, Space, and Technology Committee

  8. Fizzy. Feature subset selection for metagenomics

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Ditzler, Gregory; Morrison, J. Calvin; Lan, Yemin; Rosen, Gail L.

    2015-11-04

    Background: Some of the current software tools for comparative metagenomics provide ecologists with the ability to investigate and explore bacterial communities using α– & β–diversity. Feature subset selection – a sub-field of machine learning – can also provide a unique insight into the differences between metagenomic or 16S phenotypes. In particular, feature subset selection methods can obtain the operational taxonomic units (OTUs), or functional features, that have a high-level of influence on the condition being studied. For example, in a previous study we have used information-theoretic feature selection to understand the differences between protein family abundances that best discriminate betweenmore » age groups in the human gut microbiome. Results: We have developed a new Python command line tool, which is compatible with the widely adopted BIOM format, for microbial ecologists that implements information-theoretic subset selection methods for biological data formats. We demonstrate the software tools capabilities on publicly available datasets. Conclusions: We have made the software implementation of Fizzy available to the public under the GNU GPL license. The standalone implementation can be found at http://github.com/EESI/Fizzy.« less

  9. Fizzy. Feature subset selection for metagenomics

    SciTech Connect (OSTI)

    Ditzler, Gregory; Morrison, J. Calvin; Lan, Yemin; Rosen, Gail L.

    2015-11-04

    Background: Some of the current software tools for comparative metagenomics provide ecologists with the ability to investigate and explore bacterial communities using α– & β–diversity. Feature subset selection – a sub-field of machine learning – can also provide a unique insight into the differences between metagenomic or 16S phenotypes. In particular, feature subset selection methods can obtain the operational taxonomic units (OTUs), or functional features, that have a high-level of influence on the condition being studied. For example, in a previous study we have used information-theoretic feature selection to understand the differences between protein family abundances that best discriminate between age groups in the human gut microbiome. Results: We have developed a new Python command line tool, which is compatible with the widely adopted BIOM format, for microbial ecologists that implements information-theoretic subset selection methods for biological data formats. We demonstrate the software tools capabilities on publicly available datasets. Conclusions: We have made the software implementation of Fizzy available to the public under the GNU GPL license. The standalone implementation can be found at http://github.com/EESI/Fizzy.

  10. Ligand iron catalysts for selective hydrogenation

    DOE Patents [OSTI]

    Casey, Charles P.; Guan, Hairong

    2010-11-16

    Disclosed are iron ligand catalysts for selective hydrogenation of aldehydes, ketones and imines. A catalyst such as dicarbonyl iron hydride hydroxycyclopentadiene) complex uses the OH on the five member ring and hydrogen linked to the iron to facilitate hydrogenation reactions, particularly in the presence of hydrogen gas.

  11. Acridine-intercalator based hypoxia selective cytotoxins

    DOE Patents [OSTI]

    Papadopoulou-Rosenzweig, Maria; Bloomer, William D.; Bloomer, William D.

    1994-01-01

    Hypoxia selective cytotoxins of the general formula ##STR1## wherein n is from 1 to 5, and NO.sub.2 is in at least one of the 2, 4 or 5-positions of the imidazole. Such compounds have utility as radiosensitizers and chemosensitizers.

  12. Acridine-intercalator based hypoxia selective cytotoxins

    DOE Patents [OSTI]

    Papadopoulou-Rosenzweig, M.; Bloomer, W.D.

    1994-03-15

    Hypoxia selective cytotoxins of the general formula STR1 wherein n is from 1 to 5, and NO[sub 2] is in at least one of the 2, 4 or 5-positions of the imidazole are developed. Such compounds have utility as radiosensitizers and chemosensitizers. 9 figs.

  13. Color selective photodetector and methods of making

    DOE Patents [OSTI]

    Walker, Brian J.; Dorn, August; Bulovic, Vladimir; Bawendi, Moungi G.

    2013-03-19

    A photoelectric device, such as a photodetector, can include a semiconductor nanowire electrostatically associated with a J-aggregate. The J-aggregate can facilitate absorption of a desired wavelength of light, and the semiconductor nanowire can facilitate charge transport. The color of light detected by the device can be chosen by selecting a J-aggregate with a corresponding peak absorption wavelength.

  14. Selective flotation of inorganic sulfides from coal

    DOE Patents [OSTI]

    Miller, Kenneth J.; Wen, Wu-Wey

    1989-01-01

    Pyritic sulfur is removed from coal or other carbonaceous material through the use of humic acid as a coal flotation depressant. Following the removal of coarse pyrite, the carbonaceous material is blended with humic acid, a pyrite flotation collector and a frothing agent within a flotation cell to selectively float pyritic sulfur leaving clean coal as an underflow.

  15. Selective flotation of inorganic sulfides from coal

    DOE Patents [OSTI]

    Miller, K.J.; Wen, Wu-Wey

    1988-05-31

    Pyritic sulfur is removed from coal or other carbonaceous material through the use of humic acid as a coal flotation depressant. Following the removal of coarse pyrite, the carbonaceous material is blended with humic acid, a pyrite flotation collector and a frothing agent within a flotation cell to selectively float pyritic sulfur leaving clean coal as an underflow. 1 fig., 2 tabs.

  16. Isotope separation by selective photodissociation of glyoxal

    DOE Patents [OSTI]

    Marling, John B.

    1976-01-01

    Dissociation products, mainly formaldehyde and carbon monoxide, enriched in a desired isotope of carbon, oxygen, or hydrogen are obtained by the selective photodissociation of glyoxal wherein glyoxal is subjected to electromagnetic radiation of a predetermined wavelength such that photon absorption excites and induces dissociation of only those molecules of glyoxal containing the desired isotope.

  17. Glucose sensing molecules having selected fluorescent properties

    DOE Patents [OSTI]

    Satcher, Jr., Joe H.; Lane, Stephen M.; Darrow, Christopher B.; Cary, Douglas R.; Tran, Joe Anh

    2004-01-27

    An analyte sensing fluorescent molecule that employs intramolecular electron transfer is designed to exhibit selected fluorescent properties in the presence of analytes such as saccharides. The selected fluorescent properties include excitation wavelength, emission wavelength, fluorescence lifetime, quantum yield, photostability, solubility, and temperature or pH sensitivity. The compound comprises an aryl or a substituted phenyl boronic acid that acts as a substrate recognition component, a fluorescence switch component, and a fluorophore. The fluorophore and switch component are selected such that the value of the free energy for electron transfer is less than about 3.0 kcal mol.sup.-1. Fluorescent compounds are described that are excited at wavelengths greater than 400 nm and emit at wavelengths greater than 450 nm, which is advantageous for optical transmission through skin. The fluorophore is typically selected from transition metal-ligand complexes and thiazine, oxazine, oxazone, or oxazine-one as well as anthracene compounds. The fluorescent compound can be immobilized in a glucose permeable biocompatible polymer matrix that is implantable below the skin.

  18. Selective epitaxy using the gild process

    DOE Patents [OSTI]

    Weiner, Kurt H.

    1992-01-01

    The present invention comprises a method of selective epitaxy on a semiconductor substrate. The present invention provides a method of selectively forming high quality, thin GeSi layers in a silicon circuit, and a method for fabricating smaller semiconductor chips with a greater yield (more error free chips) at a lower cost. The method comprises forming an upper layer over a substrate, and depositing a reflectivity mask which is then removed over selected sections. Using a laser to melt the unmasked sections of the upper layer, the semiconductor material in the upper layer is heated and diffused into the substrate semiconductor material. By varying the amount of laser radiation, the epitaxial layer is formed to a controlled depth which may be very thin. When cooled, a single crystal epitaxial layer is formed over the patterned substrate. The present invention provides the ability to selectively grow layers of mixed semiconductors over patterned substrates such as a layer of Ge.sub.x Si.sub.1-x grown over silicon. Such a process may be used to manufacture small transistors that have a narrow base, heavy doping, and high gain. The narrowness allows a faster transistor, and the heavy doping reduces the resistance of the narrow layer. The process does not require high temperature annealing; therefore materials such as aluminum can be used. Furthermore, the process may be used to fabricate diodes that have a high reverse breakdown voltage and a low reverse leakage current.

  19. Strategy Guideline: Proper Water Heater Selection

    SciTech Connect (OSTI)

    Hoeschele, M.; Springer, D.; German, A.; Staller, J.; Zhang, Y.

    2015-04-01

    This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

  20. Strategy Guideline. Proper Water Heater Selection

    SciTech Connect (OSTI)

    Hoeschele, M.; Springer, D.; German, A.; Staller, J.; Zhang, Y.

    2015-04-09

    This Strategy Guideline on proper water heater selection was developed by the Building America team Alliance for Residential Building Innovation to provide step-by-step procedures for evaluating preferred cost-effective options for energy efficient water heater alternatives based on local utility rates, climate, and anticipated loads.

  1. Program Evaluation: Selection of Reviewers | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selection of Reviewers Program Evaluation: Selection of Reviewers Peer review results depend greatly on the quality of reviewers and the process by which they are selected. The two most important things for competent and credible peer reviewers are that (1) the selection process is such that peer reviewers are selected primarily on the basis of necessary expertise in the subject area under review, and (2) peer reviewers disclose to agencies any conflict of interest prior to being selected, and

  2. Engineering development of selective agglomeration. Final report

    SciTech Connect (OSTI)

    Not Available

    1993-04-01

    This report presents the findings of the project entitled ``Engineering Development of Selective Agglomeration.`` The purpose is to develop selective agglomeration technology to a commercially acceptable level by 1993. Engineering development included bench-scale process development, component development adaptation or modification of existing unit operations, proof-of-concept (POC) module design, fabrication, testing, data evaluation, and conceptual design of a commercial facility. The information obtained during POC operation resulted in a technical and economic design base sufficient to support construction and operation of a commercial plant. Throughout this project performance targets for the engineering development of selective agglomeration process were to achieve 85% or greater Btu recovery at 85% or greater pyritic sulfur rejection (PSR). Additional objectives included producing a final clean-coal product with an ash content of 6% or less which is suitable for conventional coal handling systems. The selective agglomeration process, as applied to coal cleaning, is based on differences in the surface chemistry of coal and its associated impurities. Coal particles are hydrophobic (i.e., repel water) while the majority of its impurities are hydrophilic (i.e., stabilized in water). During selective agglomeration, a liquid (the agglomerant) that is immiscible with water is introduced into a coal-water slurry and agitated to disperse it in the slurry, thereby allowing it to come into contact with all particles in the slurry. The coal particles, due to their hydrophobic nature, are attracted to the agglomerant phase. The hydrophilic mineral impurities remain in the water phase. Continued agitation of the agglomerant-coated coal particles causes them to coalesce to form agglomerates. Once the agglomerates are formed, they are separated from the mineral matter-bearing aqueous phase by subsequent processing steps.

  3. Review and selection of unsaturated flow models

    SciTech Connect (OSTI)

    Reeves, M.; Baker, N.A.; Duguid, J.O.

    1994-04-04

    Since the 1960`s, ground-water flow models have been used for analysis of water resources problems. In the 1970`s, emphasis began to shift to analysis of waste management problems. This shift in emphasis was largely brought about by site selection activities for geologic repositories for disposal of high-level radioactive wastes. Model development during the 1970`s and well into the 1980`s focused primarily on saturated ground-water flow because geologic repositories in salt, basalt, granite, shale, and tuff were envisioned to be below the water table. Selection of the unsaturated zone at Yucca Mountain, Nevada, for potential disposal of waste began to shift model development toward unsaturated flow models. Under the US Department of Energy (DOE), the Civilian Radioactive Waste Management System Management and Operating Contractor (CRWMS M&O) has the responsibility to review, evaluate, and document existing computer models; to conduct performance assessments; and to develop performance assessment models, where necessary. This document describes the CRWMS M&O approach to model review and evaluation (Chapter 2), and the requirements for unsaturated flow models which are the bases for selection from among the current models (Chapter 3). Chapter 4 identifies existing models, and their characteristics. Through a detailed examination of characteristics, Chapter 5 presents the selection of models for testing. Chapter 6 discusses the testing and verification of selected models. Chapters 7 and 8 give conclusions and make recommendations, respectively. Chapter 9 records the major references for each of the models reviewed. Appendix A, a collection of technical reviews for each model, contains a more complete list of references. Finally, Appendix B characterizes the problems used for model testing.

  4. Hybridization and Selective Release of DNA Microarrays

    SciTech Connect (OSTI)

    Beer, N R; Baker, B; Piggott, T; Maberry, S; Hara, C M; DeOtte, J; Benett, W; Mukerjee, E; Dzenitis, J; Wheeler, E K

    2011-11-29

    DNA microarrays contain sequence specific probes arrayed in distinct spots numbering from 10,000 to over 1,000,000, depending on the platform. This tremendous degree of multiplexing gives microarrays great potential for environmental background sampling, broad-spectrum clinical monitoring, and continuous biological threat detection. In practice, their use in these applications is not common due to limited information content, long processing times, and high cost. The work focused on characterizing the phenomena of microarray hybridization and selective release that will allow these limitations to be addressed. This will revolutionize the ways that microarrays can be used for LLNL's Global Security missions. The goals of this project were two-fold: automated faster hybridizations and selective release of hybridized features. The first study area involves hybridization kinetics and mass-transfer effects. the standard hybridization protocol uses an overnight incubation to achieve the best possible signal for any sample type, as well as for convenience in manual processing. There is potential to significantly shorten this time based on better understanding and control of the rate-limiting processes and knowledge of the progress of the hybridization. In the hybridization work, a custom microarray flow cell was used to manipulate the chemical and thermal environment of the array and autonomously image the changes over time during hybridization. The second study area is selective release. Microarrays easily generate hybridization patterns and signatures, but there is still an unmet need for methodologies enabling rapid and selective analysis of these patterns and signatures. Detailed analysis of individual spots by subsequent sequencing could potentially yield significant information for rapidly mutating and emerging (or deliberately engineered) pathogens. In the selective release work, optical energy deposition with coherent light quickly provides the thermal energy to

  5. Energy transfer upon collision of selectively excited CO{sub...

    Office of Scientific and Technical Information (OSTI)

    Energy transfer upon collision of selectively excited COsub 2 molecules: State-to-state ... Citation Details In-Document Search Title: Energy transfer upon collision of selectively ...

  6. Small Business Vouchers Pilot: 33 Businesses Selected for Lab...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Small Business Vouchers Pilot: 33 Businesses Selected for Lab Collaboration, Round 2 Now Open Small Business Vouchers Pilot: 33 Businesses Selected for Lab Collaboration, Round 2 ...

  7. Recovery Act Selections for Smart Grid Investment Grant Awards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Category Updated November 2011 Recovery Act Selections for Smart Grid Investment Grant Awards - By Category Updated November 2011 List of selections for the Smart Grid Investment ...

  8. Materials Down Select Decisions Made Within DOE's Chemical Hydrogen...

    Office of Environmental Management (EM)

    Down Select Decisions Made Within DOE's Chemical Hydrogen Storage Center of Excellence Materials Down Select Decisions Made Within DOE's Chemical Hydrogen Storage Center of ...

  9. Solid-State Lighting Recovery Act Award Selections | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solid-State Lighting Recovery Act Award Selections Solid-State Lighting Recovery Act Award Selections A chart highlighting core technology research projects and product development ...

  10. Selected Bibliography on Electric Motor Repair | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Bibliography on Electric Motor Repair Selected Bibliography on Electric Motor Repair The following series of repair documents related to electric motors were produced by...

  11. Strong Orbital-selective Correlation Effects Unite Iron Chalcogenide...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    orbital-selective renormalized case at low temperatures, and (right) orbital-selective Mott phase where the dxy orbital completely loses coherence in the high temperature phase....

  12. Recovery Act Selections for Smart Grid Investment Grant Awards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selections for Smart Grid Investment Grant Awards- By Category Updated July 2010 Recovery Act Selections for Smart Grid Investment Grant Awards- By Category Updated July 2010 A ...

  13. Reactivity of the Gold/Water Interface During Selective Oxidation...

    Office of Scientific and Technical Information (OSTI)

    the GoldWater Interface During Selective Oxidation Catalysis Citation Details In-Document Search Title: Reactivity of the GoldWater Interface During Selective Oxidation Catalysis ...

  14. Livermore's Crawford selected for California Council on Science...

    National Nuclear Security Administration (NNSA)

    Livermore's Crawford selected for California Council on Science and Technology Wednesday, ... has been selected as a member of the California Council on Science and Technology (CCST). ...

  15. Improvement of catalytic activity in selective oxidation of styrene...

    Office of Scientific and Technical Information (OSTI)

    Improvement of catalytic activity in selective oxidation of styrene with Hsub 2Osub 2 ... Title: Improvement of catalytic activity in selective oxidation of styrene with Hsub ...

  16. Selection Process and Notification for Small Business Innovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selection Process and Notification for Small Business Innovation Research and Small Business Technology Transfer Awards Selection Process and Notification for Small Business ...

  17. Structural Origins of DNA Target Selection and Nucleobase Extrusion...

    Office of Scientific and Technical Information (OSTI)

    of DNA Target Selection and Nucleobase Extrusion by a DNA Cytosine Methyltransferase Citation Details In-Document Search Title: Structural Origins of DNA Target Selection ...

  18. Premium Efficiency Motor Selection and Application Guide - A...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Premium Efficiency Motor Selection and Application Guide - A Handbook for Industry Premium Efficiency Motor Selection and Application Guide - A Handbook for Industry This handbook ...

  19. Los Alamos National Laboratory selects three small businesses...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Three small businesses selected for environmental work Los Alamos National Laboratory selects three small businesses for environmental work The companies chosen are Terranear PMC,...

  20. Energy Savings Performance Contracting (ESPC)- How to Select...

    Energy Savers [EERE]

    How to Select an Energy Service Company (ESCO) Energy Savings Performance Contracting (ESPC)- How to Select an Energy Service Company (ESCO) Provides a one page summary on key...

  1. Guidelines for Selecting Cool Roofs | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidelines for Selecting Cool Roofs Guidelines for Selecting Cool Roofs Guide covers how to understand, evaluate, and implement cool roof technologies. PDF icon coolroofguide.pdf ...

  2. Building America Case Study: Selecting Ventilation Systems for...

    Energy Savers [EERE]

    Selecting Ventilation Systems for Existing Homes Selecting the Best System When determining the most practical ventilation system for an existing home, planning is crucial. Keep ...

  3. Deactivation Mechanisms of Base Metal/Zeolite Urea Selective...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Deactivation Mechanisms of Base MetalZeolite Urea Selective Catalytic Reduction Materials... Deactivation Mechanisms of Base MetalZeolite Urea Selective Catalytic Reduction Materials...

  4. ITP Metal Casting: Energy Use in Selected Metalcasting Facilities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Use in Selected Metalcasting Facilities - 2003 ITP Metal Casting: Energy Use in Selected Metalcasting Facilities - 2003 energyuseinselectedmetalcasting52804.pdf (1.2 MB) More ...

  5. Deactivation Mechanisms of Base Metal/Zeolite Urea Selective...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Materials Deactivation Mechanisms of Base MetalZeolite Urea Selective Catalytic Reduction ... More Documents & Publications Deactivation Mechanisms of Base MetalZeolite Urea Selective ...

  6. Recovery Act Selections for Smart Grid Invesment Grant Awards...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Recovery Act Selections for Smart Grid Invesment Grant Awards- By Category Updated July 2010 Chart listing projects selected for Smart Grid Investment Grants under American ...

  7. PROJECT SELECTIONS FOR DOE PHASE III XLERATOR SMALL BUSINESS...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PROJECT SELECTIONS FOR DOE PHASE III XLERATOR SMALL BUSINESS PROGRAM PROJECT SELECTIONS FOR DOE PHASE III XLERATOR SMALL BUSINESS PROGRAM PDF icon SBIRPhaseIII.pdf More Documents...

  8. Los Alamos laser selected for 2020 Mars mission

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Los Alamos laser selected for 2020 Mars mission Los Alamos laser selected for 2020 Mars mission SuperCam builds upon the successful capabilities demonstrated aboard the Curiosity ...

  9. Selecting a New Water Heater | Department of Energy

    Energy Savers [EERE]

    Heat & Cool Water Heating Selecting a New Water Heater Selecting a New Water Heater Water heater testing facility at Oak Ridge National Laboratory. Water heater testing ...

  10. Fact #861 February 23, 2015 Idle Fuel Consumption for Selected...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles Fact 861 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles ...

  11. Fact #861 February 23, 2015 Idle Fuel Consumption for Selected...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    1 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel Vehicles - Dataset Fact 861 February 23, 2015 Idle Fuel Consumption for Selected Gasoline and Diesel ...

  12. Select an Energy-Efficient Centrifugal Pump | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    This tip sheet details important considerations when selecting an energy-efficient centrifugal pump, such as performance curve. PUMPING SYSTEMS TIP SHEET 3 Select an ...

  13. Six University Coal Research Projects Selected to Boost Advanced...

    Office of Environmental Management (EM)

    Six University Coal Research Projects Selected to Boost Advanced Energy Production Six University Coal Research Projects Selected to Boost Advanced Energy Production September 9, ...

  14. Weidlinger-Navarro selected for waste staging facility design...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    staging facility design support business selected Weidlinger-Navarro Northern New Mexico Joint Venture, was selected to perform architectural and engineering work for the Lab's...

  15. Project Profile: High-Temperature Solar Selective Coating Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Solar Selective Coating Development for Power Tower Receivers Project Profile: High-Temperature Solar Selective Coating Development for Power Tower Receivers Sandia National ...

  16. High-Temperatuer Solar Selective Coating Development for Power...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Temperatuer Solar Selective Coating Development for Power Tower Receivers High-Temperatuer Solar Selective Coating Development for Power Tower Receivers This presentation was ...

  17. Los Alamos Selected as Atomic Weapons Laboratory | National Nuclear...

    National Nuclear Security Administration (NNSA)

    Los Alamos Selected as Atomic Weapons Laboratory Los Alamos, NM Groves selects Los Alamos, New Mexico, as site for separate scientific laboratory to design an atomic bomb

  18. Phase Discrimination through Oxidant Selection for Iron Oxide...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Phase Discrimination through Oxidant Selection for Iron Oxide Ultrathin Films Home > Research > ANSER Research Highlights > Phase Discrimination through Oxidant Selection for Iron...

  19. Research and energy efficiency: Selected success stories (Conference...

    Office of Scientific and Technical Information (OSTI)

    Research and energy efficiency: Selected success stories Citation Details In-Document Search Title: Research and energy efficiency: Selected success stories You are accessing a ...

  20. Review of Selected Home Energy Auditing Tools | Department of...

    Office of Environmental Management (EM)

    Residential Buildings Home Energy Score Home Energy Score Publications Review of Selected Home Energy Auditing Tools Review of Selected Home Energy Auditing Tools This ...

  1. Process boasts 95% selectivity for LPG

    SciTech Connect (OSTI)

    Brinkmeyer, F.M.; Drehman, L.E.; Olbrich, M.E.; Rohr, D.F.

    1983-03-28

    This article describes a new Phillips catalytic process for the dehydrogenation and/or the dehydrocyclization of paraffinic feedstocks, steam active reforming (STAR), which produces no structural isomerization. Light paraffins such as propane, isobutane, and normal butane can be dehydrogenated to their respective mono-olefins with selectivities as high as 95%. The process offers such advantages as: it will accept a wide range of feedstocks; selectivity to desired products is high; there is a minimum of structural isomerization which permits the production of specific products from particular feedstocks with high purity; it works well with paraffinic and olefinic materials which make poor feeds in conventional reforming processes; and the catalyst has moderate tolerance for sulfur and nitrogen compounds.

  2. Mode Selective Excitation Using Coherent Control Spectroscopy

    SciTech Connect (OSTI)

    Singh, Ajay K.; Konradi, Jakow; Materny, Arnulf; Sarkar, Sisir K.

    2008-11-14

    Femtosecond time-resolved coherent anti-Stokes Raman scattering (fs-CARS) gives access to ultrafast molecular dynamics. However, femtosecond laser pulses are spectrally broad and therefore coherently excite several molecular modes. While the temporal resolution is high, usually no mode-selective excitation is possible. This paper demonstrates the feasibility of selectively exciting specific molecular vibrations in solution phase with shaped fs laser excitation using a feedback-controlled optimization technique guided by an evolutionary algorithm. This approach is also used to obtain molecule-specific CARS spectra from a mixture of different substances. The optimized phase structures of the fs pulses are characterized to get insight into the control process. Possible applications of the spectrum control are discussed.

  3. Fluidized bed selective pyrolysis of coal

    DOE Patents [OSTI]

    Shang, Jer Y.; Cha, Chang Y.; Merriam, Norman W.

    1992-01-01

    The present invention discloses a process for the pyrolysis of coal which comprises the effective utilization of two zonal inclined fluidized beds, where said zones can be selectively controlled as to temperature and heating rate. The first zonal inclined fluidized bed serves as a dryer for crushed coal and additionally is controlled to selectively pyrolyze said coal producing substantially carbon dioxide for recycle use. The second zonal inclined fluidized bed further pyrolyzes the coal to gaseous, liquid and char products under controlled temperature and heating rate zones designed to economically integrate the product mix. The gas and liquid products are recovered from the gaseous effluent stream while the char which remains can be further treated or utilized in a subsequent process step.

  4. Fluidized bed selective pyrolysis of coal

    DOE Patents [OSTI]

    Shang, J.Y.; Cha, C.Y.; Merriam, N.W.

    1992-12-15

    The present invention discloses a process for the pyrolysis of coal which comprises the effective utilization of two zonal inclined fluidized beds, where said zones can be selectively controlled as to temperature and heating rate. The first zonal inclined fluidized bed serves as a dryer for crushed coal and additionally is controlled to selectively pyrolyze said coal producing substantially carbon dioxide for recycle use. The second zonal inclined fluidized bed further pyrolyses the coal to gaseous, liquid and char products under controlled temperature and heating rate zones designed to economically integrate the product mix. The gas and liquid products are recovered from the gaseous effluent stream while the char which remains can be further treated or utilized in a subsequent process step. 9 figs.

  5. Potent and selective mediators of cholesterol efflux

    DOE Patents [OSTI]

    Bielicki, John K; Johansson, Jan

    2015-03-24

    The present invention provides a family of non-naturally occurring polypeptides having cholesterol efflux activity that parallels that of full-length apolipoproteins (e.g., Apo AI and Apo E), and having high selectivity for ABAC1 that parallels that of full-length apolipoproteins. The invention also provides compositions comprising such polypeptides, methods of identifying, screening and synthesizing such polypeptides, and methods of treating, preventing or diagnosing diseases and disorders associated with dyslipidemia, hypercholesterolemia and inflammation.

  6. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  7. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  8. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  9. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  10. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  11. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  12. A Spintronic Semiconductor with Selectable Charge Carriers

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A Spintronic Semiconductor with Selectable Charge Carriers Print Accentuating the Positive (or the Negative) Spintronics-a type of electronics that makes use of electron spin as well as charge-is already here to a certain extent. The discovery of giant magnetoresistance, a spin-based effect, has revolutionized the information storage industry. Beyond this, however, scientists envision the possibility of combining storage and processing functions in one integrated system. In electronics,

  13. Selected papers for global `95 concerning plutonium

    SciTech Connect (OSTI)

    Sutcliffe, W.G.

    1996-06-14

    This report contains selected papers from the Global `95 Conference ``Evaluation of Emerging Nuclear Fuel Cycle Systems,`` held in Versailles, Sept. 11-14, 1995. The 11 papers in Part I are from ``Benefits and Risks of Reprocessing`` sessions. The 7 papers in Part II are some of the more interesting poster papers that relate to the use of Pu for power generation. Finally, the 3 papers are on the topic of management and disposition of Pu from retired nuclear weapons.

  14. Algal Culture Management and Strain Selection Workshop

    Office of Energy Efficiency and Renewable Energy (EERE)

    ATP3 (Algae Testbed Public-Private Partnership) will be hosting the Microalgal Culture Management and Strain Selection Workshop August 24–28, 2015, at The University of Texas at Austin. Topics will include isolating and identifying microalgae, handling and managing microalgal cultures, screening for desirable characteristics, genetically improving strains, and analyzing lipids and higher-value products. Workshop modules will include hands-on bioprospecting, performing sample measurements, monitoring cultures for contaminants, and analyzing algal biomass composition.

  15. ARM - Selected Science Team Applications - FY 2008

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Applications - FY 2008 The

  16. ARM - Selected Science Team Applications - FY 2009

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    9 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Applications - FY 2009 The

  17. ARM - Selected Science Team Proposals - FY 1991

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1991 Dr. Richard

  18. ARM - Selected Science Team Proposals - FY 1992

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1992 Dr. R.

  19. ARM - Selected Science Team Proposals - FY 1994

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    4 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1994 Dr. Thomas

  20. ARM - Selected Science Team Proposals - FY 1995

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1995 Dr. R.

  1. ARM - Selected Science Team Proposals - FY 1997

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1997 Dr. Thomas

  2. ARM - Selected Science Team Proposals - FY 1998

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 1998 Dr. Shepard

  3. ARM - Selected Science Team Proposals - FY 2000

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    0 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 2000 The Office

  4. ARM - Selected Science Team Proposals - FY 2002

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 2002 The Office

  5. ARM - Selected Science Team Proposals - FY 2003

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 2003 The Office

  6. ARM - Selected Science Team Proposals - FY 2005

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 2005 The Office

  7. ARM - Selected Science Team Proposals - FY 2006

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 Science Research Themes Research Highlights Journal Articles Collaborations Atmospheric System Research (ASR) Earth System Modeling Regional & Global Climate Modeling Terrestrial Ecosystem Science Performance Metrics User Meetings Past ARM Science Team Meetings ASR Meetings Accomplishments Accomplishments in Atmospheric Science, 2008-2013 (PDF, 7.4MB) ARM Accomplishments from the Science Program and User Facility, 1989-2008 (PDF, 696KB) Selected Science Team Proposals - FY 2006 The Office

  8. Selecting RMF Controls for National Security Systems

    SciTech Connect (OSTI)

    Witzke, Edward L.

    2015-08-01

    In 2014, the United States Department of Defense started tra nsitioning the way it performs risk management and accreditation of informatio n systems to a process entitled Risk Management Framework for DoD Information Technology or RMF for DoD IT. There are many more security and privacy contro ls (and control enhancements) from which to select in RMF, than there w ere in the previous Information Assurance process. This report is an attempt t o clarify the way security controls and enhancements are selected. After a brief overview and comparison of RMF for DoD I T with the previously used process, this report looks at the determination of systems as National Security Systems (NSS). Once deemed to be an NSS, this report addr esses the categorization of the information system with respect to impact level s of the various security objectives and the selection of an initial baseline o f controls. Next, the report describes tailoring the controls through the use of overl ays and scoping considerations. Finally, the report discusses organizatio n-defined values for tuning the security controls to the needs of the information system.

  9. Pump Selection Considerations Pumping System Tip Sheet - #2

    SciTech Connect (OSTI)

    None

    2005-10-01

    BestPractices Program tip sheet discussing pumping system efficiency with pumping selection considerations.

  10. NEUP Project Selections_September212011_IRP and Infrastructure Improvements

    Office of Energy Efficiency and Renewable Energy (EERE)

    Projects selections for NEUP 2011 under Integrated Research Projects and University Research Infrastructure Improvements.

  11. " Sources by Industry Group, Selected Industries, and Selected Characteristics,"

    U.S. Energy Information Administration (EIA) Indexed Site

    6. Capability to Switch from Residual Fuel Oil to Alternative Energy" " Sources by Industry Group, Selected Industries, and Selected Characteristics," 1991 " (Estimates in Thousand Barrels)" ,," Residual Fuel Oil",,," Alternative Types of Energy(b)" ," ","-","-","-------------","-","-","-","-","-","-","-","RSE"

  12. NGNP Graphite Selection and Acquisition Strategy

    SciTech Connect (OSTI)

    Burchell, T.; Bratton, R.; Windes, W.

    2007-09-30

    The nuclear graphite (H-451) previously used in the United States for High-Temperature Reactors (HTRs) is no longer available. New graphites have been developed and are considered suitable candidates for the Next-Generation Nuclear Plant (NGNP). A complete properties database for these new, available, candidate grades of graphite must be developed to support the design and licensing of NGNP core components. Data are required for the physical, mechanical (including radiation-induced creep), and oxidation properties of graphites. Moreover, the data must be statistically sound and take account of in-billet, between billets, and lot-to-lot variations of properties. These data are needed to support the ongoing development1 of the risk-derived American Society of Mechanical Engineers (ASME) graphite design code (a consensus code being prepared under the jurisdiction of the ASME by gas-cooled reactor and NGNP stakeholders including the vendors). The earlier Fort St. Vrain design of High-Temperature Reactor (HTRs) used deterministic performance models for H-451, while the NGNP will use new graphite grades and risk-derived (probabilistic) performance models and design codes, such as that being developed by the ASME. A radiation effects database must be developed for the currently available graphite materials, and this requires a substantial graphite irradiation program. The graphite Technology Development Plan (TDP)2 describes the data needed and the experiments planned to acquire these data in a timely fashion to support NGNP design, construction, and licensing. The strategy for the selection of appropriate grades of graphite for the NGNP is discussed here. The final selection of graphite grades depends upon the chosen reactor type and vendor because the reactor type (pebble bed or prismatic block) has a major influence on the graphite chosen by the designer. However, the time required to obtain the needed irradiation data for the selected NGNP graphite is sufficiently

  13. Local Energy Assurance Planning: Map of Selected Cities | Department of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Selected Cities Local Energy Assurance Planning: Map of Selected Cities Map of the United States showing the location and population size of cities selected for Local Energy Assurance Planning grants under the American Recovery and Reinvestment Act. Local Energy Assurance Planning: Map of Selected Cities (329.21 KB) More Documents & Publications Local Energy Assurance Planning: Map of States with Number of Cities Selected Recovery Act Local Energy Assurance Planning (LEAP)

  14. Development of the selective coagulation process

    SciTech Connect (OSTI)

    Yoon, R.H.; Luttrell, G.H.

    1992-07-01

    The selective hydrophobic coagulation (SHC) process is based on the recent finding that hydrophobic particles can be selectively coagulated without using traditional agglomerating agents or flocculants. The driving force for the coagulation is the attractive energy between hydrophobic surfaces, an interaction that has been overlooked in classical colloid chemistry. In most cases, selective separations can be achieved using simple pH control to disperse the mineral matter, followed by recovery of the coal coagula using techniques that take advantage of the size enlargement. In the present work, studies have been carried out to further investigate the fundamental mechanisms of the SHC process and the parameters that affect the process of separating coal from the ash-forming minerals and pyritic sulfur. Studies have included direct force measurements of the attractive interaction between model hydrophobic surfaces, in-situ measurements of the size distributions of coagula formed under a variety of operating conditions, and development of a population balance model to describe the coagulation process. An extended DLVO colloid stability model which includes a hydrophobic interaction energy term has also been developed to explain the findings obtained from the experimental studies. In addition to the fundamental studies, bench-scale process development test work has been performed to establish the best possible method of separating the coagula from dispersed mineral matter. Two types of separators, i.e., a sedimentation tank and a rotating drum screen, were examined in this study. The sedimentation tank proved to be the more efficient unit, achieving ash reductions as high as 60% in a single pass while recovering more than 90% of the combustible material. This device, which minimizes turbulence and coagula breakage, was used in subsequent test work to optimize design and operating parameters.

  15. Bond selective chemistry beyond the adiabatic approximation

    SciTech Connect (OSTI)

    Butler, L.J.

    1993-12-01

    One of the most important challenges in chemistry is to develop predictive ability for the branching between energetically allowed chemical reaction pathways. Such predictive capability, coupled with a fundamental understanding of the important molecular interactions, is essential to the development and utilization of new fuels and the design of efficient combustion processes. Existing transition state and exact quantum theories successfully predict the branching between available product channels for systems in which each reaction coordinate can be adequately described by different paths along a single adiabatic potential energy surface. In particular, unimolecular dissociation following thermal, infrared multiphoton, or overtone excitation in the ground state yields a branching between energetically allowed product channels which can be successfully predicted by the application of statistical theories, i.e. the weakest bond breaks. (The predictions are particularly good for competing reactions in which when there is no saddle point along the reaction coordinates, as in simple bond fission reactions.) The predicted lack of bond selectivity results from the assumption of rapid internal vibrational energy redistribution and the implicit use of a single adiabatic Born-Oppenheimer potential energy surface for the reaction. However, the adiabatic approximation is not valid for the reaction of a wide variety of energetic materials and organic fuels; coupling between the electronic states of the reacting species play a a key role in determining the selectivity of the chemical reactions induced. The work described below investigated the central role played by coupling between electronic states in polyatomic molecules in determining the selective branching between energetically allowed fragmentation pathways in two key systems.

  16. Corrosion reference for geothermal downhole materials selection

    SciTech Connect (OSTI)

    Ellis, P.F. II, Smith, C.C.; Keeney, R.C.; Kirk, D.K.; Conover, M.F.

    1983-03-01

    Geothermal downhole conditions that may affect the performance and reliability of selected materials and components used in the drilling, completion, logging, and production of geothermal wells are reviewed. The results of specific research and development efforts aimed at improvement of materials and components for downhole contact with the hostile physicochemical conditions of the geothermal reservoir are discussed. Materials and components covered are tubular goods, stainless steels and non-ferrous metals for high-temperature downhole service, cements for high-temperature geothermal wells, high-temperature elastomers, drilling and completion tools, logging tools, and downhole pumps. (MHR)

  17. Mode selectivity in multiple-beam klystrons

    SciTech Connect (OSTI)

    Nusinovich, Gregory S.; Abe, David K.

    2006-09-15

    A general method is developed for calculating the coupling coefficients of multiple beamlets of an arbitrary geometry to resonator fields having an arbitrary transverse distribution. A number of examples illustrate the effectiveness of this method for calculating coupling coefficients and show the effect of device parameters on the coupling of a given multiple electron beam to competing modes of multiple-beam klystrons (MBKs) operating in high-order modes. The method can be used for evaluating the mode selectivity and the 'monotron instability' in MBKs. It can also be used for determining the Pierce gain parameter in multiple-beam traveling-wave tubes.

  18. Development of the Selective Hydrophobic Coagulation process

    SciTech Connect (OSTI)

    Yoon, R.H.; Luttrell, G.H.

    1992-01-01

    A novel technique for selectively coagulating and separating coal from dispersed mineral matter has been developed at Virginia Tech. The process, Selective Hydrophobic Coagulation (SHC), has been studied since 1986 under the sponsorship of the US Department of Energy (Contracts AC22-86PC91221 and AC22-90PC90174). The SHC process differs from oil agglomeration, shear or polymer flocculation, and electrolytic coagulation processes in that it does not require reagents or additives to induce the formation of coagula. In most cases, simple pH control is all that is required to (1) induce the coagulation of coal particles and (2) effectively disperse particles of mineral matter. If the coal is oxidized, a small dosage of reagents can be used to enhance the process. During the quarter, the Anutech Mark IV surface force apparatus was used to generate surface force-distance data for the mica/dodecylamine hydrochloride system (Task 2.1.1). Work to characterize the hydrophobicity of this system and the mica/DDOA[sup [minus

  19. Environmental assessment: special isotope separation process selection

    SciTech Connect (OSTI)

    Not Available

    1986-04-01

    This Environmental Assessment (EA) evaluates the differences in potential environmental impacts between two plutonium Special Isotope Separation (SIS) technologies: Atomic Vapor Laser Isotope Separation (AVLIS) and Molecular Laser Isotope Separation (MLIS). Both SIS technologies use PuO/sub 2/ as feed; AVLIS converts feed to plutonium metal and MLIS converts feed to PuF/sub 6/. The AVLIS process uses laser energy to selectively photoionize and electrostatically separate plutonium isotopes from an atomic vapor stream. The MLIS process uses laser energy to selectively disassociate specific isotopes of plutonium in the form of PuF/sub 6/ molecules to create PuF/sub 5/ for collection and further processing. Both processes produce plutonium metal as their product. An evaluation of differences in potential environmental impacts attributed to the construction of an SIS facility, based on either technology, included a comparison of construction materials, land areas required, and the size of the design and construction workforce. The differences in potential environmental impacts from operating an SIS facility were also compared. No large differences in potential environmental impacts would be expected from the use of process chemicals. An AVLIS or an MLIS facility would produce operating effluents that would meet all applicable radiation, chemical, and hazardous waste standards and would be constructed to protect workers, the public and the environment. This EA has not revealed any significant differences in the potential environmental impacts that could occur as a result of deploying either the AVLIS or the MLIS Special Isotope Separation technology.

  20. Selective solvent delignification for fermentation enhancement

    SciTech Connect (OSTI)

    Avgerinos, G.C.; Wang, D.I.C.

    1983-01-01

    Cellulose and hemicellulose in renewable biomass resources such as cornstover and wheat straw have been examined as substrates for the production of ethanol. A mixed culture of selected strains of Clostridium thermocellum and Clostridium thermosaccharolyticum are used to accomplish both the hydrolysis and fermentation of these carbohydrates in a single step. However, lignin and related phenolic materials are shown to diminsh the rate, extent, and yield at which these carbohydrates can be utilized for ethanol production. In order to overcome this problem, a selective solvent pretreatment with alkaline-ethanol-water mixtures was examined for the delignification of cellulosic biomass under conditions where very little loss of fermentable carbohydrates results. Under optimal conditions, up to 67% of the initial lignin in cornstover can be extraced while 95% of the alpha cellulose and pentosan carbohydrates remain insoluble. Subsequent mixed culture fermentation of the treated material has shown a 400% increase in the rate of degradation and greater than 85% utilization of substrate. The effects of various extraction parameters on delignification kinetics and subsequent fermentation performance are discussed. (Refs. 17).

  1. Selective solvent delignification for fermentation enhancement

    SciTech Connect (OSTI)

    Augerinos, G.C.; Wang, D.I.C.

    1983-01-01

    Cellulose and hemicellulose in renewable biomass resources such as cornstover and wheat straw have been examined as substrates for the production of ethanol. A mixed culture of selected strains of Clostridium thermocellum and Clostridium thermosaccharolyticumare used to accomplish both the hydrolysis and fermentation of these carbohydrates in a single step. However, lignin and related phenolic materials are shown to diminish the rate, extent, and yield at which these carbohydrates can be utilized for ethanol production. In order to overcome this problem, a selective solvent pretreatment with alkaline-ethanol-water mixtures was examined for the delignification of cellulosic biomass under conditions where very little loss of fermentable carbohyrates results. Under optimal conditions, up to 67% of the initial lignin in cornstover can be extracted while 95% of the ..cap alpha..-cellulose and pentosan carbohydrates remain insoluble. Subsequent mixed culture fermentation of the treated material has shown a 400% increase in the rate of degradation and greater than 85% utilization of the substrate. The effects of various extraction parameters on delignification kinetics and subsequent fermentation performance are discussed.

  2. Hydroprocessing conditions affect catalyst shape selection

    SciTech Connect (OSTI)

    Cooper, B.H.; Donnis, B.B.L.; Moyse, B.

    1986-12-08

    Diffusion characteristics, pressure drop limitations, catalyst pore size, catalyst loading techniques, and catalytic activity requirements all affect the selection of the catalyst shape used in hydroprocessing of heavy distillates. Haldor Topsoe Inc. has studied the effects of these hydroprocessing conditions on various shapes of its TK-551 nickel-molybdenum hydroprocessing catalysts. The studies were carried out using Arabian Heavy vacuum gas oil (VGO). For hydroprocessing heavy distillates, polylobed catalysts and dense loading techniques have obvious advantages. The higher external surface of polylobed catalysts ensures better accessibility to the inner surface of the catalyst, and dense loading allows more catalytic activity in a given reactor volume. However there are drawbacks. Polylobed catalysts tend to pack less densely thus reducing volume activity. And dense loading results in higher pressure through the bed. The philosophy behind the use of polylobed catalysts is to improve the diffusion characteristics.

  3. Optimal Portfolio Selection Under Concave Price Impact

    SciTech Connect (OSTI)

    Ma Jin; Song Qingshuo; Xu Jing; Zhang Jianfeng

    2013-06-15

    In this paper we study an optimal portfolio selection problem under instantaneous price impact. Based on some empirical analysis in the literature, we model such impact as a concave function of the trading size when the trading size is small. The price impact can be thought of as either a liquidity cost or a transaction cost, but the concavity nature of the cost leads to some fundamental difference from those in the existing literature. We show that the problem can be reduced to an impulse control problem, but without fixed cost, and that the value function is a viscosity solution to a special type of Quasi-Variational Inequality (QVI). We also prove directly (without using the solution to the QVI) that the optimal strategy exists and more importantly, despite the absence of a fixed cost, it is still in a 'piecewise constant' form, reflecting a more practical perspective.

  4. Uranium Metal Analysis via Selective Dissolution

    SciTech Connect (OSTI)

    Delegard, Calvin H.; Sinkov, Sergey I.; Schmidt, Andrew J.; Chenault, Jeffrey W.

    2008-09-10

    Uranium metal, which is present in sludge held in the Hanford Site K West Basin, can create hazardous hydrogen atmospheres during sludge handling, immobilization, or subsequent transport and storage operations by its oxidation/corrosion in water. A thorough knowledge of the uranium metal concentration in sludge therefore is essential to successful sludge management and waste process design. The goal of this work was to establish a rapid routine analytical method to determine uranium metal concentrations as low as 0.03 wt% in sludge even in the presence of up to 1000-fold higher total uranium concentrations (i.e., up to 30 wt% and more uranium) for samples to be taken during the upcoming sludge characterization campaign and in future analyses for sludge handling and processing. This report describes the experiments and results obtained in developing the selective dissolution technique to determine uranium metal concentration in K Basin sludge.

  5. Selected Isotopes for Optimized Fuel Assembly Tags

    SciTech Connect (OSTI)

    Gerlach, David C.; Mitchell, Mark R.; Reid, Bruce D.; Gesh, Christopher J.; Hurley, David E.

    2008-10-01

    In support of our ongoing signatures project we present information on 3 isotopes selected for possible application in optimized tags that could be applied to fuel assemblies to provide an objective measure of burnup. 1. Important factors for an optimized tag are compatibility with the reactor environment (corrosion resistance), low radioactive activation, at least 2 stable isotopes, moderate neutron absorption cross-section, which gives significant changes in isotope ratios over typical fuel assembly irradiation levels, and ease of measurement in the SIMS machine 2. From the candidate isotopes presented in the 3rd FY 08 Quarterly Report, the most promising appear to be Titanium, Hafnium, and Platinum. The other candidate isotopes (Iron, Tungsten, exhibited inadequate corrosion resistance and/or had neutron capture cross-sections either too high or too low for the burnup range of interest.

  6. Replacement Power Facility site selection report

    SciTech Connect (OSTI)

    Wike, L.D.; Toole, G.L.; Specht, W.L.

    1992-06-01

    The Department of Energy (DOE) has proposed the construction and operation of a Replacement Power Facility (RPF) for supplementing and replacing existing sources of steam and possibly electricity at the Savannah River Site (SRS). DOE is preparing an Environmental Impact Statement (EIS) for this project As part of the impact analysis of the proposed action, the EIS will include a detailed description of the environment where the RPF will be constructed. This description must be specific to the recommended site at SRS, which contains more than 300 square miles of land including streams, lakes, impoundments, wetlands, and upland areas. A formal site-selection process was designed and implemented to identify the preferred RPF site.

  7. Scintillating 99Tc Selective Ion Exchange Resins

    SciTech Connect (OSTI)

    Mitchell Greenhalgh; Richard D. Tillotson

    2012-07-01

    Scintillating technetium (99Tc) selective ion exchange resins have been developed and evaluated for equilibrium capacities and detection efficiencies. These resins can be utilized for the in-situ concentration and detection of low levels of pertechnetate anions (99TcO4-) in natural waters. Three different polystyrene type resin support materials were impregnated with varying amounts of tricaprylmethylammonium chloride (Aliquat 336) extractant, several different scintillating fluors and wavelength shifters. The prepared resins were contacted batch-wise to equilibrium over a wide range of 99TcO4- concentrations in natural water. The measured capacities were used to develop Langmuir adsorption isotherms for each resin. 99Tc detection efficiencies were determined and up to 71.4 ± 2.6% was achieved with some resins. The results demonstrate that a low level detection limit for 99TcO4- in natural waters can be realized.

  8. MS/MS Automated Selected Ion Chromatograms

    Energy Science and Technology Software Center (OSTI)

    2005-12-12

    This program can be used to read a LC-MS/MS data file from either a Finnigan ion trap mass spectrometer (.Raw file) or an Agilent Ion Trap mass spectrometer (.MGF and .CDF files) and create a selected ion chromatogram (SIC) for each of the parent ion masses chosen for fragmentation. The largest peak in each SIC is also identified, with reported statistics including peak elution time, height, area, and signal to noise ratio. It creates severalmore » output files, including a base peak intensity (BPI) chromatogram for the survey scan, a BPI for the fragmentation scans, an XML file containing the SIC data for each parent ion, and a "flat file" (ready for import into a database) containing summaries of the SIC data statistics.« less

  9. How to select a water treatment supplier

    SciTech Connect (OSTI)

    Keister, T.E.

    1995-06-01

    This paper is a continuation of one first presented in 1984 at the International Water Conference. Since that time many things have changed, not the least of which is my means of earning a living. While my prospective upon the world has changed due to conversion from user to supplier, the industrial world today is also much different than that of ten years ago. Major factors driving change are the explosion in computer technology, new environmental realities and restrictions, and a radically different world from both the political and economic standpoints. All of these areas directly impact upon water treatment and the selection of a supplier. Your attention is called to the sponsor of this paper, the Association of Water Technologies (AWT). The AWT is the trade association representing {open_quotes}small{close_quotes} water treatment companies, which presently control at least 21% of the US market in water treatment services. This 21% plus market share is greater than that of any single water treatment supplier. Growth of the AWT has been quite remarkable since its founding nine short years ago, membership now stands at approximately 370 companies. The growth of the Association is a good indication that the individual small water treatment suppliers, making up 74% of the membership, are also growing. Given the huge marketing budgets of the six major water treatment companies, it is sometimes difficult to realize that there are approximately 800 other water treatment companies in the market. Many of these smaller companies can oftentimes provide a better water treatment program than a major company can due to better service, closer customer contact, superior technology, and lower overhead costs. Selection of a water treatment supplier, be it a major or one of the smaller companies, should be made upon a firm foundation of facts, not marketing {open_quotes}hype{close_quotes}.

  10. Require selection of units? | OpenEI Community

    Open Energy Info (EERE)

    Require selection of units? Home > Groups > Utility Rate I found a rate with no unit selected for "energyrateunit". Can we make this a required field (if data exists for that tab)?...