Sample records for u-050 adobe flex

  1. U-050: Adobe Flex SDK Input Validation Flaw Permits Cross-Site Scripting Attacks

    Broader source: Energy.gov [DOE]

    Flex applications created using the Flex SDK may not properly filter HTML code from user-supplied input before displaying the input.

  2. Flex Fuel Vehicle Systems

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Flex Fuel Vehicle Systems * Bosch FFV Project Structure and Partners * Purpose of Work - Project Highlights * Barriers - Existing Flex Fuel Systems and Problems * Approach - Bosch...

  3. Residential California adobe : mud form

    E-Print Network [OSTI]

    Daymond, Diana Leigh

    1985-01-01T23:59:59.000Z

    Northern California has a rich tradition of adobe architecture . Formed with earth, defined by site, climate and use, the adobe structures exemplify a building methodology in harmony with nature and the lifestyle of it's ...

  4. Get Adobe Reader Now!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe Reader X, or

  5. Get Adobe Reader Now!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe Reader X,

  6. FlexEnergy

    Broader source: Energy.gov [DOE]

    Presentation—given at the Fall 2011 Federal Utility Partnership Working Group (FUPWG) meeting—provides a company overview of FlexEnergy, Inc.

  7. V-090: Adobe Flash Player / AIR Multiple Vulnerabilities | Department...

    Broader source: Energy.gov (indexed) [DOE]

    0: Adobe Flash Player AIR Multiple Vulnerabilities V-090: Adobe Flash Player AIR Multiple Vulnerabilities February 13, 2013 - 12:14am Addthis PROBLEM: Adobe Flash Player AIR...

  8. V-176: Adobe Flash Player Memory Corruption Flaw Lets Remote...

    Broader source: Energy.gov (indexed) [DOE]

    Adobe Flash Player Memory Corruption Flaw Lets Remote Users Execute Arbitrary Code PLATFORM: Adobe Flash Player 11.7.700.202 and earlier versions for Windows Adobe Flash Player...

  9. T-577: Security Advisory for Adobe Flash Player, Adobe Reader and Acrobat

    Broader source: Energy.gov [DOE]

    A critical vulnerability exists in Adobe Flash Player 10.2.152.33 and earlier versions (Adobe Flash Player 10.2.154.13 and earlier for Chrome users) for Windows, Macintosh, Linux and Solaris operating systems, Adobe Flash Player 10.1.106.16 and earlier versions for Android, and the Authplay.dll component that ships with Adobe Reader and Acrobat X (10.0.1) and earlier 10.x and 9.x versions of Reader and Acrobat for Windows and Macintosh operating systems.

  10. E-Print Network 3.0 - adobe photoshop cs3 Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Grafikbearbeitungssoftware: - Ulead DVD PowerTools 2 - Adobe Photoshop CS3 - Windows Media Encoder Wiedergabesoftware: - Windows Media... Grafikbearbeitungssoftware: - Adobe...

  11. T-600: Security Advisory for Adobe Flash Player, Adobe Reader and Acrobat

    Broader source: Energy.gov [DOE]

    This vulnerability (CVE-2011-0611) could cause a crash and potentially allow an attacker to take control of the affected system. There are reports that this vulnerability is being exploited in the wild in targeted attacks via a Flash (.swf) file embedded in a Microsoft Word (.doc) file delivered as an email attachment, targeting the Windows platform. At this time, Adobe is not aware of any attacks via PDF targeting Adobe Reader and Acrobat. Adobe Reader X Protected Mode mitigations would prevent an exploit of this kind from executing.

  12. Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality Breakout Session 2: Frontiers and Horizons Session 2-B:...

  13. U-104: Adobe Flash Player Multiple Vulnerabilities | Department...

    Broader source: Energy.gov (indexed) [DOE]

    have been reported in Adobe Flash Player, which can be exploited by malicious people to conduct cross-site scripting attacks, bypass certain security restrictions, and...

  14. U-241: Adobe Flash Player Bugs Let Remote Users Execute Arbitrary...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    41: Adobe Flash Player Bugs Let Remote Users Execute Arbitrary Code and Obtain Information U-241: Adobe Flash Player Bugs Let Remote Users Execute Arbitrary Code and Obtain...

  15. ADOBE PHOTOSHOP 5.0 Back to Contents

    E-Print Network [OSTI]

    Durand, Frédo

    Tutorial ADOBE PHOTOSHOP 5.0 Back to Contents Photo Retouching Adobe® Photoshop® provides you techniques for basic image correction by stepping you through the process of acquiring, resizing correct problems in composition and sharpen the overall focus of the image. Basic steps Most retouching

  16. ADOBE PHOTOSHOP 5.0 Back to Contents

    E-Print Network [OSTI]

    Durand, Frédo

    Tutorial ADOBE PHOTOSHOP 5.0 Back to Contents Layer Basics Adobe® Photoshop® lets you isolate flexibility in composing and revising an image. #12;LAYER BASICS PAGE 2 OF 11 In this lesson, you'll learn how about the Layers palette and layer options. #12;LAYER BASICS PAGE 3 OF 11 3 Choose File > Open. Locate

  17. Natural Gas Ethanol Flex-Fuel

    E-Print Network [OSTI]

    Natural Gas Propane Electric Ethanol Flex-Fuel Biodiesel Vehicle Buyer's Guide Clean Cities 2012 . . . . . . . . . . . . . . . . . . . . . . . . 4 About This Guide . . . . . . . . . . . . . . . . . . . 5 Compressed Natural Gas and emissions. Alternative fueling infrastructure is expanding in many regions, making natural gas, propane

  18. ADOBE PHOTOSHOP 5.0 Back to Contents

    E-Print Network [OSTI]

    Durand, Frédo

    Tutorial ADOBE PHOTOSHOP 5.0 Back to Contents Working with Selections Learning how to select areas four basic sets of tools--the marquee, lasso, magic wand, and pen tools. In addition, you can use

  19. U-054: Security Advisory for Adobe Reader and Acrobat

    Broader source: Energy.gov [DOE]

    This U3D memory corruption vulnerability (CVE-2011-2462) could cause a crash and potentially allow an attacker to take control of the affected system. There are reports that the vulnerability is being actively exploited in the wild in limited, targeted attacks against Adobe Reader 9.x on Windows. Adobe Reader X Protected Mode and Acrobat X Protected View mitigations would prevent an exploit of this kind from executing.

  20. DC Students Flex Their Mental Muscles in Regional Science Bowl...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DC Students Flex Their Mental Muscles in Regional Science Bowl Competition DC Students Flex Their Mental Muscles in Regional Science Bowl Competition February 23, 2015 - 3:12pm...

  1. V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    6: Adobe AcrobatReader Multiple Flaws Lets Remote Users Execute Arbitrary Code and Local Users Gain Elevated Privileges V-066: Adobe AcrobatReader Multiple Flaws Lets Remote...

  2. T-555: Adobe Acrobat and Reader Image Parsing Arbitrary Code Execution Vulnerability

    Broader source: Energy.gov [DOE]

    Critical vulnerabilities have been identified in Adobe Reader X (10.0) for Windows and Macintosh; Adobe Reader 9.4.1 and earlier versions for Windows, Macintosh and UNIX; and Adobe Acrobat X (10.0) and earlier versions for Windows and Macintosh. These vulnerabilities could cause the application to crash and potentially allow an attacker to take control of the affected system. Risk for Adobe Reader X users is significantly lower, as none of these issues bypass Protected Mode mitigations.

  3. U-064: Adobe Acrobat/Reader PRC Memory Corruption Error Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A vulnerability was reported in Adobe Acrobat/Reader, this vulnerability is being actively exploited against Windows-based systems.

  4. ISSO Information Alert Multiple Vulnerabilities in Adobe Flash

    E-Print Network [OSTI]

    Dyer, Bill

    SHARING AND ANALYSIS CENTER CYBER SECURITY ADVISORY MS-ISAC ADVISORY NUMBER: 2012-014 DATE(S) ISSUED: 3 to take complete control of affected systems. Adobe Flash Player is a widely distributed multimedia or URL and distributes that file or URL to unsuspecting users via e-mail or some other means. When

  5. Flex power perspectives of indirect power system control through...

    Open Energy Info (EERE)

    power perspectives of indirect power system control through dynamic power price (Smart Grid Project) Jump to: navigation, search Project Name Flex power perspectives of indirect...

  6. Flex Fuels Energy | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex Fuels Energy Jump

  7. UtiliFlex | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and toolsoperation plansUtiliFlex Jump to:

  8. Development of an SI DI Ethanol Optimized Flex Fuel Engine Using...

    Broader source: Energy.gov (indexed) [DOE]

    Development of an SI DI Ethanol Optimized Flex Fuel Engine Using Advanced Valvetrain Development of an SI DI Ethanol Optimized Flex Fuel Engine Using Advanced Valvetrain...

  9. E-Print Network 3.0 - adobe photoshop cs4 Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    11 COMPUTER APPLICATIONS IN THE GEOSCIENCES --FALL 2008 -- Summary: or to external media (DVD, USB stick, etc.) SECTION 2: ADOBE PHOTOSHOP PCs: Photoshop is located inside...

  10. E-Print Network 3.0 - adobe photoshop lightroom Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    24 COMPUTER APPLICATIONS IN THE GEOSCIENCES --FALL 2008 -- Summary: or to external media (DVD, USB stick, etc.) SECTION 2: ADOBE PHOTOSHOP PCs: Photoshop is located inside...

  11. U-166: Adobe Shockwave Player Memory Corruption Flaws Let Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    Multiple vulnerabilities were reported in Adobe Shockwave Player. A remote user can cause arbitrary code to be executed on the target user's system.

  12. Casas Adobes, Arizona: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomassSustainableCSL GasPermitsGreenCarrizoCarteretGrande, Arizona:Casas Adobes,

  13. T-627: Adobe Flash Player Memory Corruption | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014,Zaleski -BlueprintThisVulnerabilities | DepartmentDepartment|Adobe Flash

  14. DOE-Flex Bulletin-Worker Injury While on a DOE-Flex Arrangement |

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM |TRUJuly 29,of EnergyofRevised Finding ofFlex

  15. DOE-Flex Bulletin-Worker Injury While on a DOE-Flex Arrangement

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex Bulletin The

  16. DOE-Flex Bulletin-Worker Injury While on a DOE-Flex Arrangement |

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed off Energy.gov. Are you0and Transparency, and MoreEnergyofDepartment of Energy DOE-Flex

  17. FlexGP : a scalable system for factored learning in the cloud

    E-Print Network [OSTI]

    Derby, Owen C

    2013-01-01T23:59:59.000Z

    This work presents FlexGP, a new system designed for scalable machine learning in the cloud. FlexGP presents a learner-agnostic, data-parallel approach to cloud-based distributed learning using existing single-machine ...

  18. Fact #718: March 12, 2012 Number of Flex-Fuel Models Offered...

    Energy Savers [EERE]

    Economy program for producing flex-fuel vehicles, which run on E-85, a blend of 85% ethanol and 15% gasoline, andor gasoline. Number of Flex Fuel Vehicle Models by...

  19. T-549: Adobe ColdFusion 9.0.1 CHF1 and earlier

    Broader source: Energy.gov [DOE]

    Cross-site scripting (XSS) vulnerability in Adobe ColdFusion before 9.0.1 CHF1 allows remote attackers to inject arbitrary web script or HTML via vectors involving a "tag script.

  20. T-604: Google Chrome updated version of the Adobe Flash player...

    Broader source: Energy.gov (indexed) [DOE]

    of the Adobe Flash player April 15, 2011 - 4:30am Addthis PROBLEM: Chrome Stable and Beta channels have been updated to 10.0.648.134 for Windows, Mac, Linux and Chrome Frame...

  1. Conveyorized Photoresist Stripping Replacement for Flex Circuit Fabrication

    SciTech Connect (OSTI)

    Megan Donahue

    2009-02-24T23:59:59.000Z

    A replacement conveyorized photoresist stripping system was characterized to replace the ASI photoresist stripping system. This system uses the qualified ADF-25c chemistry for the fabrication of flex circuits, while the ASI uses the qualified potassium hydroxide chemistry. The stripping process removes photoresist, which is used to protect the copper traces being formed during the etch process.

  2. Development of an SI DI Ethanol Optimized Flex Fuel Engine Using...

    Broader source: Energy.gov (indexed) [DOE]

    SI DI Ethanol Optimized Flex Fuel Engine Using Advanced Valvetrain Wayne Moore, Matt Foster, Kevin Hoyer, Keith Confer Delphi Advanced Powertrain DEER Conference September 29, 2010...

  3. T-569: Adobe Flash SWF File Processing Memory Corruption Remote Code Execution Vulnerability

    Broader source: Energy.gov [DOE]

    Critical vulnerabilities have been identified in Adobe Flash Player 10.1.102.64 and earlier versions for Windows, Macintosh, Linux, and Solaris. These vulnerabilities could cause the application to crash and could potentially allow an attacker to take control of the affected system.

  4. Fuel Puddle Model and AFR Compensator for Gasoline-Ethanol Blends in Flex-Fuel Engines*

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    Fuel Puddle Model and AFR Compensator for Gasoline-Ethanol Blends in Flex-Fuel Engines* Kyung for gasoline-ethanol blends is, thus, necessary for the purpose of air-to-fuel ratio control. In this paper, we- ration, air-to-fuel ratio control, gasoline-ethanol blend, flex-fuel vehicles I. INTRODUCTION Currently

  5. A Demonstration of FlexPref: Extensible Preference Evaluation Inside the DBMS Engine

    E-Print Network [OSTI]

    Mokbel, Mohamed F.

    A Demonstration of FlexPref: Extensible Preference Evaluation Inside the DBMS Engine Justin J This demonstration presents FlexPref, a framework imple- mented inside the DBMS query processor that enables effi, a fundamental issue is how we can realize each existing and future method inside a DBMS This work is supported

  6. U-146: Adobe Reader/Acrobat Multiple Vulnerabilities | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY6: Adobe

  7. FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION

    E-Print Network [OSTI]

    Pattanaik, Sumanta N.

    FLEX AND PINCH: A CASE STUDY OF WHOLE HAND INPUT DESIGN FOR VIRTUAL ENVIRONMENT INTERACTION JOSEPH J. LAVIOLA JR. and ROBERT C. ZELEZNIK Brown University Site of the NSF Science and Technology Center. In this paper, we describe our Pinch Glove like input device which is used as a tool to augment bend

  8. TOLERANT ETHANOL ESTIMATION IN FLEX-FUEL VEHICLES DURING MAF SENSOR DRIFTS

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    TOLERANT ETHANOL ESTIMATION IN FLEX-FUEL VEHICLES DURING MAF SENSOR DRIFTS Kyung-ho Ahn, Anna G Engineering Dearborn, Michigan 48121 ABSTRACT Flexible fuel vehicles (FFVs) can operate on a blend of ethanol on ethanol sensor installed in the vehicle fueling system, or on the ethanol- dependent air-to-fuel ratio

  9. 2010-01-0166 Ethanol Content Estimation in Flex Fuel Direct Injection

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    2010-01-0166 Ethanol Content Estimation in Flex Fuel Direct Injection Engines Using In to estimate the ethanol content, which exploits the difference in stoi- chiometric air-to-fuel ratio (SAFR to large errors with mass air flow sensor bias and/or fuel injector shift. In this paper, an ethanol

  10. bepalingen_algemene_aard_studentassistent_UT-Flex_maart_2010 1 GENERAL PROVISIONS

    E-Print Network [OSTI]

    Twente, Universiteit

    the allowance monthly, together with the salary payment. 6. YEAR-END BONUS The year-end bonus is calculated-end bonus in the month of December. UT-flex pays out the bonus monthly, together with the salary payment. 7

  11. Automatic Parameter Identification in FlexRay based Automotive Communication Networks

    E-Print Network [OSTI]

    Automatic Parameter Identification in FlexRay based Automotive Communication Networks Eric-Triggered Architectures are being introduced in safety-critical automotive systems ("X-by-wire") to cope with the growing and explore its limitations. I. INTRODUCTION Nowadays most automotive innovations stem from elec- tronic

  12. Assessing the operational life of flexible printed boards intended for continuous flexing applications : a case study.

    SciTech Connect (OSTI)

    Beck, David Franklin

    2011-01-01T23:59:59.000Z

    Through the vehicle of a case study, this paper describes in detail how the guidance found in the suite of IPC (Association Connecting Electronics Industries) publications can be applied to develop a high level of design assurance that flexible printed boards intended for continuous flexing applications will satisfy specified lifetime requirements.

  13. Technical evaluation and assessment of CNG/LPG bi-fuel and flex-fuel vehicle viability

    SciTech Connect (OSTI)

    Sinor, J E [Sinor (J.E.) Consultants, Inc., Niwot, CO (United States)

    1994-05-01T23:59:59.000Z

    This report compares vehicles using compressed natural gas (CNG), liquefied petroleum gas (LPG), and combinations of the two in bi-fuel or flex-fuel configurations. Evidence shows that environmental and energy advantages can be gained by replacing two-fuel CNG/gasoline vehicles with two-fuel or flex-fuel systems to be economically competitive, it is necessary to develop a universal CNG/LPG pressure-regulator-injector and engine control module to switch from one tank to the other. For flex-fuel CNG/LPG designs, appropriate composition sensors, refueling pumps, fuel tanks, and vaporizers are necessary.

  14. Design, fabrication, and testing of a three-dimensional, plastically-deformed, monolithic compliant HexFlex Nanomanipulator

    E-Print Network [OSTI]

    Korb, Samuel N. (Samuel Noaa), 1984-

    2004-01-01T23:59:59.000Z

    An experimental study was performed to investigate the possibility of incorporating plastic deformation into a precision compliant mechanism design. The particular application of a compliant HexFlex Nanomanipulator was ...

  15. E85, Flex-Fuel Vehicles, and AB 1493 Integrating biofuels into California's vehicular greenhouse gas regulations

    E-Print Network [OSTI]

    Kammen, Daniel M.

    E85, Flex-Fuel Vehicles, and AB 1493 Integrating biofuels into California's vehicular greenhouse.................................................................................................. 5 1.1.3 CALIFORNIA CLEAN FUELS PROGRAM ....................................... 6 1.1.5 AB 1007: THE ALTERNATIVE FUELS PLAN

  16. Semi-flexible gas-insulated transmission line using sandwiched discs for intermittent flexing joints

    DOE Patents [OSTI]

    Kommineni, P.R.

    1983-02-15T23:59:59.000Z

    A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by the use of main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. The flexing elements are formed by sandwiching together, by fusing, a pair of thin hollow discs which are fixedly secured to both the main conductor sections and the conductor hub section. 4 figs.

  17. Semi-flexible gas-insulated transmission line using sandwiched discs for intermittent flexing joints

    DOE Patents [OSTI]

    Kommineni, Prasad R. (Westboro, MA)

    1983-02-15T23:59:59.000Z

    A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by the use of main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. The flexing elements are formed by sandwiching together, by fusing, a pair of thin hollow discs which are fixedly secured to both the main conductor sections and the conductor hub section.

  18. ESTIMATION OF ETHANOL CONTENT IN FLEX-FUEL VEHICLES USING AN EXHAUST GAS OXYGEN SENSOR: MODEL, TUNING AND SENSITIVITY

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    ESTIMATION OF ETHANOL CONTENT IN FLEX-FUEL VEHICLES USING AN EXHAUST GAS OXYGEN SENSOR: MODEL periods of intense interest in using ethanol as an alternative fuel to petroleum-based gasoline and diesel derivatives. Currently available flexible fuel vehicles (FFVs) can operate on a blend of gasoline and ethanol

  19. Design of Experiments to Determine Causes of Flex Cable Solder Wicking, Discoloration and Hole Location Defects

    SciTech Connect (OSTI)

    Wolfe, Larry

    2009-04-22T23:59:59.000Z

    Design of Experiments (DoE) were developed and performed in an effort to discover and resolve the causes of three different manufacturing issues; large panel voids after Hot Air Solder Leveling (HASL), cable hole locations out of tolerance after lamination and delamination/solder wicking around flat flex cable circuit lands after HASL. Results from a first DoE indicated large panel voids could be eliminated by removing the pre-HASL cleaning. It also revealed eliminating the pre-HASL bake would not be detrimental when using a hard press pad lamination stackup. A second DoE indicated a reduction in hard press pad stackup lamination pressure reduced panel stretch in the y axis approximately 70%. A third DoE illustrated increasing the pre-HASL bake temperature could reduce delamination/solder wicking when using a soft press pad lamination stackup.

  20. Manufacturing Cost Analysis for YSZ-Based FlexCells at Pilot and Full Scale Production Scales

    SciTech Connect (OSTI)

    Scott Swartz; Lora Thrun; Robin Kimbrell; Kellie Chenault

    2011-05-01T23:59:59.000Z

    Significant reductions in cell costs must be achieved in order to realize the full commercial potential of megawatt-scale SOFC power systems. The FlexCell designed by NexTech Materials is a scalable SOFC technology that offers particular advantages over competitive technologies. In this updated topical report, NexTech analyzes its FlexCell design and fabrication process to establish manufacturing costs at both pilot scale (10 MW/year) and full-scale (250 MW/year) production levels and benchmarks this against estimated anode supported cell costs at the 250 MW scale. This analysis will show that even with conservative assumptions for yield, materials usage, and cell power density, a cost of $35 per kilowatt can be achieved at high volume. Through advancements in cell size and membrane thickness, NexTech has identified paths for achieving cell manufacturing costs as low as $27 per kilowatt for its FlexCell technology. Also in this report, NexTech analyzes the impact of raw material costs on cell cost, showing the significant increases that result if target raw material costs cannot be achieved at this volume.

  1. Get Adobe Reader Now!

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic2 OPAM Flash2011-12 OPAMGeneral Guidance on NEPAGeothermalRenewable Energy

  2. ALTERNATIVE FUEL VEHICLE (AFV) INFORMATION Over 98% of the U-M auto passenger fleet is flex fuel vehicles (FFV). A FFV is capable of operating on

    E-Print Network [OSTI]

    Kirschner, Denise

    ALTERNATIVE FUEL VEHICLE (AFV) INFORMATION Over 98% of the U-M auto passenger fleet is flex fuel of both. FFV's are equipped with an engine and fuel system designed specifically to be compatible with ethanol's chemical properties. FFV's qualify as alternative fuel vehicles under the Energy Policy Act

  3. Investigation of a FAST-OrcaFlex Coupling Module for Integrating Turbine and Mooring Dynamics of Offshore Floating Wind Turbines: Preprint

    SciTech Connect (OSTI)

    Masciola, M.; Robertson, A.; Jonkman, J.; Driscoll, F.

    2011-10-01T23:59:59.000Z

    To enable offshore floating wind turbine design, the following are required: accurate modeling of the wind turbine structural dynamics, aerodynamics, platform hydrodynamics, a mooring system, and control algorithms. Mooring and anchor design can appreciably affect the dynamic response of offshore wind platforms that are subject to environmental loads. From an engineering perspective, system behavior and line loads must be studied well to ensure the overall design is fit for the intended purpose. FAST (Fatigue, Aerodynamics, Structures and Turbulence) is a comprehensive simulation tool used for modeling land-based and offshore wind turbines. In the case of a floating turbine, continuous cable theory is used to emulate mooring line dynamics. Higher modeling fidelity can be gained through the use of finite element mooring theory. This can be achieved through the FASTlink coupling module, which couples FAST with OrcaFlex, a commercial simulation tool used for modeling mooring line dynamics. In this application, FAST is responsible for capturing the aerodynamic loads and flexure of the wind turbine and its tower, and OrcaFlex models the mooring line and hydrodynamic effects below the water surface. This paper investigates the accuracy and stability of the FAST/OrcaFlex coupling operation.

  4. The Neo-Flex LCD Arm is the perfect accessory to add flexibility to your LCD monitor or TV. Sleek and streamlined, it frees up desk space and allows you

    E-Print Network [OSTI]

    Saskatchewan, University of

    The Neo-Flex LCD Arm is the perfect accessory to add flexibility to your LCD monitor or TV. Sleek lifting the LCD with the other hand. Then position the LCD where you want it and release the button. It. Highlights · Great value at a great price · Easily position your LCD or TV for maximum comfort

  5. Adobe Solar | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEE Jump to:Ohio:

  6. Flex Debit Card Your employer

    E-Print Network [OSTI]

    Fraden, Seth

    such as medical devices, eyeglasses, contact lenses, bandages, co-pays and deductibles. Q A Q A Q A Q A Q A What

  7. Flex Schedule | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New MexicoFinancingProofWorking Outside the Box Click to email

  8. Desert design : re-thinking the adobe

    E-Print Network [OSTI]

    Richard, Paul N. (Paul Normand)

    1994-01-01T23:59:59.000Z

    The focus of this thesis is the relationship between the natural landscape and the architecture of northern New Mexico. Through the design of a home and work-related out-buildings elements of reference are used to preserve ...

  9. DOE-FLEX: DOE's Telework Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2013-02-11T23:59:59.000Z

    The order establishes the requirements and responsibilities for the Departments telework program. Cancels DOE N 314.1.

  10. DOE-FLEX: DOE's Telework Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-07-05T23:59:59.000Z

    The directive establishes the requirements and responsibilities for the Department’s telework program. Canceled by DOE O 314.1.

  11. Flex-flame burner and combustion method

    DOE Patents [OSTI]

    Soupos, Vasilios (Chicago, IL); Zelepouga, Serguei (Hoffman Estates, IL); Rue, David M. (Chicago, IL); Abbasi, Hamid A. (Naperville, IL)

    2010-08-24T23:59:59.000Z

    A combustion method and apparatus which produce a hybrid flame for heating metals and metal alloys, which hybrid flame has the characteristic of having an oxidant-lean portion proximate the metal or metal alloy and having an oxidant-rich portion disposed above the oxidant lean portion. This hybrid flame is produced by introducing fuel and primary combustion oxidant into the furnace chamber containing the metal or metal alloy in a substoichiometric ratio to produce a fuel-rich flame and by introducing a secondary combustion oxidant into the furnace chamber above the fuel-rich flame in a manner whereby mixing of the secondary combustion oxidant with the fuel-rich flame is delayed for a portion of the length of the flame.

  12. Flex Fuel Optimized SI and HCCI Engine

    Broader source: Energy.gov (indexed) [DOE]

    - FY 12 439,489 Recipient (up to date): Chrysler: 270.3K estimated (labor, prototype engine and parts) MSU: 235.6K (in-kind) Barriers - Lack of modeling capability for...

  13. Flex Fuel Optimized SI and HCCI Engine

    Broader source: Energy.gov (indexed) [DOE]

    FY 12 280,463439,489 Recipient (up to date): Chrysler: 262.105K (labor, prototype engine and parts) MSU: 123K (in-kind) Barriers - Lack of modeling capability for...

  14. Flex Fuel Optimized SI and HCCI Engine

    Broader source: Energy.gov (indexed) [DOE]

    12 439,489 Barriers - Target: Demonstrate a SI and HCCI dual combustion mode engine for a blend of gasoline and E85 for the best fuel economy - Development of a cost...

  15. Flex Fuel Optimized SI and HCCI Engine

    Broader source: Energy.gov (indexed) [DOE]

    - FY 12 439,489 Recipient (up to date): Chrysler: 108.5K labor, one prototype engine and an extra head MSU: 73K (in-kind) Barriers - Lack of modeling capability for...

  16. Flex Fuel Optimized SI and HCCI Engine

    SciTech Connect (OSTI)

    Zhu, Guoming; Schock, Harold; Yang, Xiaojian; Huisjen, Andrew; Stuecken, Tom; Moran, Kevin; Zhen, Ron; Zhang, Shupeng

    2013-09-30T23:59:59.000Z

    The central objective of the proposed work is to demonstrate an HCCI (homogeneous charge compression ignition) capable SI (spark ignited) engine that is capable of fast and smooth mode transition between SI and HCCI combustion modes. The model-based control technique was used to develop and validate the proposed control strategy for the fast and smooth combustion mode transition based upon the developed control-oriented engine; and an HCCI capable SI engine was designed and constructed using production ready two-step valve-train with electrical variable valve timing actuating system. Finally, smooth combustion mode transition was demonstrated on a metal engine within eight engine cycles. The Chrysler turbocharged 2.0L I4 direct injection engine was selected as the base engine for the project and the engine was modified to fit the two-step valve with electrical variable valve timing actuating system. To develop the model-based control strategy for stable HCCI combustion and smooth combustion mode transition between SI and HCCI combustion, a control-oriented real-time engine model was developed and implemented into the MSU HIL (hardware-in-the-loop) simulation environment. The developed model was used to study the engine actuating system requirement for the smooth and fast combustion mode transition and to develop the proposed mode transition control strategy. Finally, a single cylinder optical engine was designed and fabricated for studying the HCCI combustion characteristics. Optical engine combustion tests were conducted in both SI and HCCI combustion modes and the test results were used to calibrate the developed control-oriented engine model. Intensive GT-Power simulations were conducted to determine the optimal valve lift (high and low) and the cam phasing range. Delphi was selected to be the supplier for the two-step valve-train and Denso to be the electrical variable valve timing system supplier. A test bench was constructed to develop control strategies for the electrical variable valve timing (VVT) actuating system and satisfactory electrical VVT responses were obtained. Target engine control system was designed and fabricated at MSU for both single-cylinder optical and multi-cylinder metal engines. Finally, the developed control-oriented engine model was successfully implemented into the HIL simulation environment. The Chrysler 2.0L I4 DI engine was modified to fit the two-step vale with electrical variable valve timing actuating system. A used prototype engine was used as the base engine and the cylinder head was modified for the two-step valve with electrical VVT actuating system. Engine validation tests indicated that cylinder #3 has very high blow-by and it cannot be reduced with new pistons and rings. Due to the time constraint, it was decided to convert the four-cylinder engine into a single cylinder engine by blocking both intake and exhaust ports of the unused cylinders. The model-based combustion mode transition control algorithm was developed in the MSU HIL simulation environment and the Simulink based control strategy was implemented into the target engine controller. With both single-cylinder metal engine and control strategy ready, stable HCCI combustion was achived with COV of 2.1% Motoring tests were conducted to validate the actuator transient operations including valve lift, electrical variable valve timing, electronic throttle, multiple spark and injection controls. After the actuator operations were confirmed, 15-cycle smooth combustion mode transition from SI to HCCI combustion was achieved; and fast 8-cycle smooth combustion mode transition followed. With a fast electrical variable valve timing actuator, the number of engine cycles required for mode transition can be reduced down to five. It was also found that the combustion mode transition is sensitive to the charge air and engine coolant temperatures and regulating the corresponding temperatures to the target levels during the combustion mode transition is the key for a smooth combustion mode transition. As a summary, the proposed combust

  17. Flex Fuel Optimized SI and HCCI Engine

    Broader source: Energy.gov [DOE]

    2013 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting

  18. Global Flex Group Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEI Reference LibraryAdd toWell2008)Information

  19. DOE-FLEX: DOE's Telework Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2012-04-25T23:59:59.000Z

    The JM proposes to establish the notice as an Order. The directive is required by the Telework Enhancement Act (TEA) of 2010.

  20. Oxford FlexAL SOP Introduction

    E-Print Network [OSTI]

    Reif, Rafael

    Chamber 1 from the drop down menu. Adjust the process temperature using the Table Heater setting. #12 and click OK. #12;The recipe steps will be displayed on the screen. Click on the Repeat Step

  1. Flex Fuel Vehicle Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdf Flash2010-60.pdf2 DOE Hydrogen and Fuel Cells Program and1

  2. Flex Fuel Vehicle Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdf Flash2010-60.pdf2 DOE Hydrogen and Fuel Cells Program and12009

  3. Deployment of FlexCHP System

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page onYouTube YouTube Note: Since the YouTube| DepartmentStatementDepartment of EnergyHydropower Technologies28, 2010

  4. Indiana Flex Fuels LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup | OpenHunan Runhua NewSmallholder Systems (SAMPLES)IndianOil

  5. U-002:Adobe Photoshop Elements Multiple Memory Corruption Vulnerabilities

    Broader source: Energy.gov [DOE]

    A remote user can create a file that, when loaded by the target user, will execute arbitrary code on the target user's system.

  6. T-622: Adobe Acrobat and Reader Unspecified Memory Corruption Vulnerability

    Broader source: Energy.gov [DOE]

    The vulnerability is due to an unspecified error in the affected software when it processes .pdf files. An unauthenticated, remote attacker could exploit this vulnerability by convincing a user to view a malicious .pdf file. When viewed, the file could trigger a memory corruption error that could allow the attacker to execute arbitrary code on the system with the privileges of the user.

  7. HTML5 vs. Adobe Flash : from the end user standpoint

    E-Print Network [OSTI]

    Jiang, Alexandra

    2012-01-01T23:59:59.000Z

    For NetApp products to be the best in the market, NetApp has to make the correct technology decisions to insure it leads in innovation. In this thesis, I focus on a product called NetApp Unified Manager, examining whether ...

  8. V-131: Adobe Shockwave Player Multiple Vulnerabilities | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment ofPrivileges |Vulnerabilities | DepartmentEnergy

  9. U-035: Adobe Flash Player Multiple Vulnerabilities | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY 20113: Debian

  10. V-157: Adobe Reader / Acrobat Multiple Vulnerabilities | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005UNSDepartmentFebruaryPhase|Potomac RiverWithDepartmentFixation Attacks

  11. Numerical Model of a Tensioner System and Flex Joint

    E-Print Network [OSTI]

    Huang, Han

    2013-07-27T23:59:59.000Z

    Top Tensioned Riser (TTR) and Steel Catenary Riser (SCR) are often used in a floating oil/gas production system deployed in deep water for oil transport. This study focuses on the improvements to the existing numerical code, known as CABLE3D...

  12. Watching individual molecules flex within lipid membranes using SERS

    E-Print Network [OSTI]

    Taylor, Richard W.; Benz, Felix; Sigle, Daniel O.; Bowman, Richard W.; Bao, Peng; Roth, Johannes S.; Heath, George R.; Evans, Stephen D.; Baumberg, Jeremy J.

    2014-08-12T23:59:59.000Z

    calculations for plasmonic coupling across a gap of 5 nm, corresponding to the height of the HBL of 4.4 6 0.6 nm measured by atomic force microscopy (AFM, Fig.S3), with a dielec- tric constant er , 218. The reproducibility of the gap mode is attrib- uted... subnanometer gaps in plasmonic dimers using graphene. Nano Lett. 13, 5033–5038 (2013). 8. Taylor, R. W. et al. In situ SERS monitoring of photochemistry within a nanojunction reactor. Nano Lett. 13, 5985–5990 (2013). 9. Lingwood, D. & Simons, K. Lipid rafts...

  13. Flex Fuel Polygeneration: Optimizing Cost, Sustainability, and Resiliency

    E-Print Network [OSTI]

    Daniels, Thomas E.

    a system to perform high level techno-economic analysis (TEA) · Determine economic feasibility of each · Energy sources · Energy carriers 2 #12;Initial Analysis of FFPG Systems · Design power plants;Conventional Approaches to Energy Conversion (Coal, Biomass, Wind, Natural Gas, Photons) ( Fuel, Chemicals

  14. Oscillator & Rectifier Analysis for use in large flex electronics

    E-Print Network [OSTI]

    Petta, Jason

    of an equivalent mini- circuit. #12;PROBLEM: NON-LINEARITY · The small signal model method of analysis can only. #12;Fourier Analysis of the BJTs: The Idea · In an effort to optimize the circuit & determine what Small Signal Analysis. #12;Small Signal Model · A Small Signal Model is a linear representation

  15. Flex Fuel Optimized SI and HCCI Engine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdf Flash2010-60.pdf2 DOE Hydrogen and Fuel Cells Program and

  16. Flex Fuel Optimized SI and HCCI Engine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdf Flash2010-60.pdf2 DOE Hydrogen and Fuel Cells Program and1 DOE

  17. Flex Fuel Optimized SI and HCCI Engine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport inEnergy0.pdf Flash2010-60.pdf2 DOE Hydrogen and Fuel Cells Program and1 DOE0

  18. Desk Reference on DOE-Flex (July 2011)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197E T A * S H I E L DBypass

  19. Vehicle Certification Test Fuel and Ethanol Flex Fuel Quality | Department

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your DensityEnergy U.S.-China Electric Vehicle and03/02 TUEValidation of& Systems Simulation &

  20. Desk Reference on DOE-Flex | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015 Business42.1Energy | Departmentthe Santaof EnergyDepartmentCBI worksMillThe

  1. Flex power perspectives of indirect power system control through dynamic

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmore County,and WildlifeFlash SteamNorth

  2. Flex Your Electric Vehicle Knowledge Muscle On Jeopardy! Tonight |

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.New MexicoFinancingProofWorking Outside the Box Click to

  3. T-718:Adobe Acrobat/Reader Multiple Bugs Let Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A remote user can create a file that, when loaded by the target user, will execute arbitrary code on the target user's system.

  4. VIEWING INSTRUCTIONS The following document is an Adobe Acrobat version of the 2001 BNL Groundwater

    E-Print Network [OSTI]

    -8 2.2.3 Horizontal and Vertical Hydraulic Gradients .......................................2-9 2 ............................................................................................3-1 3.0.1 ER Groundwater Remediation Program: An Overview ...................................3-3 3.0.2 Assessment of BNL Groundwater Pump and Treat System Model Performance

  5. V-045: Adobe ColdFusion Lets Local Users Bypass Sandbox Restrictions |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment of EnergyThe followingRemoteBypassDepartment of

  6. V-066: Adobe Acrobat/Reader Multiple Flaws Lets Remote Users Execute

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment of EnergyTheVulnerabilities |RemoteDepartment

  7. V-069: BlackBerry Tablet OS Adobe Flash Player and Samba Multiple

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment of EnergyTheVulnerabilities

  8. V-110: Adobe Flash Player Bugs Let Remote Users Execute Arbitrary Code |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA group current C3EDepartment ofPrivileges | Department ofDepartment ofDepartment

  9. T-630: Security update available for Adobe Flash Player | Department of

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014,Zaleski -BlueprintThisVulnerabilities |

  10. T-638: Security update available for Adobe Flash Player | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual Siteof Energy 2, 2015 - January 16, 2015 SummarySuspectofDepartment ofEnergy 38:

  11. U-241: Adobe Flash Player Bugs Let Remote Users Execute Arbitrary Code and

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23,EnergyChicopeeTechnologyfactTuscaroraDepartment ofDepartment of|

  12. U-257: Adobe ColdFusion Unspecified Bug Lets Remote Users Deny Service |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23,EnergyChicopeeTechnologyfactTuscaroraDepartment ofDepartmentScriptingAttacks

  13. T-638: Security update available for Adobe Flash Player | Department of

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO Overview OCHCOSystems Analysis Success Stories Systems Analysis SuccessEnergy 38:

  14. V-176: Adobe Flash Player Memory Corruption Flaw Lets Remote Users Execute

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015of 2005UNSDepartmentFebruaryPhase|PotomacDepartment ofConductThere isArbitrary

  15. V-197: Adobe ColdFusion 10 WebSockets Security Bypass Vulnerability |

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742Energy China 2015ofDepartment of Energy Microsoft Security Bulletin Advance Notification

  16. PayFlex Systems USA, Inc. P.O. Box 3039

    E-Print Network [OSTI]

    . Select One: Checking Account Savings Account Financial Institution: Name ________________ Attach: voided check for checking accounts OR savings deposit slip for savings accounts Form

  17. Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan

    SciTech Connect (OSTI)

    Bazzi, Abdullah; Barnhart, Steven

    2014-12-31T23:59:59.000Z

    FCA US LLC viewed this DOE funding as a historic opportunity to begin the process of achieving required economies of scale on technologies for electric vehicles. The funding supported FCA US LLC’s light-duty electric drive vehicle and charging infrastructure-testing activities and enabled FCA US LLC to utilize the funding on advancing Plug-in Hybrid Electric Vehicle (PHEV) technologies to future programs. FCA US LLC intended to develop the next generations of electric drive and energy batteries through a properly paced convergence of standards, technology, components, and common modules, as well as first-responder training and battery recycling. To support the development of a strong, commercially viable supplier base, FCA US LLC also used this opportunity to evaluate various designated component and sub-system suppliers. The original project proposal was submitted in December 2009 and selected in January 2010. The project ended in December 2014.

  18. Flexing Judicial Muscle: An Empirical Study of Judicial Activism in the Federal Courts

    E-Print Network [OSTI]

    Yung, Corey Rayburn

    2011-01-01T23:59:59.000Z

    Empirical scholarship about judicial activism has focused on the United States Supreme Court, relied upon subjective coding of individual cases as “activist” or “restrained,” and only examined instances when the federal ...

  19. Root-canal preparation with FlexMaster: canal shapes analysed by micro-computed tomography

    E-Print Network [OSTI]

    Hubscher, W; Barbakow, F; Peters, O A

    2003-01-01T23:59:59.000Z

    analysed by micro-computed tomography W. Hu bscher 1 , F.shapes analysed by micro-computed tomography. Internationalemploying micro-computed tomography (mCT) at a resolution of

  20. DC Students Flex Their Mental Muscles in Regional Science Bowl Competition

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy, OAPM | Department ofCommunications3 DATE: MaySUBJECT: 1DATE:|

  1. Fact #718: March 12, 2012 Number of Flex-Fuel Models Offered Increased in

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't YourTransport in RepresentativeDepartment ofDepartment of EnergyVehicle?Energy2011 |

  2. Driving "Back to the Future": Flex-Fuel Vehicle Awareness | Department of

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,Office of Policy,Policy ActDetroit7471Site-Wide Environmental91 DraftEnergy

  3. Development of an SI DI Ethanol Optimized Flex Fuel Engine Using Advanced

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No53197E T A * S HBatteries1000: Development of aanValvetrain |

  4. Alternative Fuels Data Center: City of Hoover Fleet Boasts 200-Plus Flex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProducts (VAP)MassachusettsExperimentalInfrastructureFuelsDisplacement andFuel

  5. Energy Upgrade California in Los Angeles County - The Flex Path Program

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisoryStandard |inHVAC |Department of EnergyTricks Lead to

  6. Advancing Plug In Hybrid Technology and Flex Fuel Application on a Chrysler

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAcceleratedDepartmentDepartment2 DOEX-Ray Diagnostics ofMini-Van

  7. Advancing Plug In Hybrid Technology and Flex Fuel Application on a Chrysler

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny: The Future of1 AAcceleratedDepartmentDepartment2 DOEX-Ray Diagnostics

  8. ProtoFlex Corp formerly Alpha Optics Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I GeothermalPotentialBiopowerSolidGenerationMethod Jump to:This propertyVolume JumpProtean Power

  9. T-609: Adobe Acrobat/Reader Memory Corruption Error in CoolType Library Lets Remote Users Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    A remote user can create a specially crafted PDF file that, when loaded by the target user, will trigger a memory corruption error in the CoolType library and execute arbitrary code on the target system. The code will run with the privileges of the target user.

  10. Instructions for Mac Users Adobe Acrobat Reader is required to view the application form, enter data, print and save. Preview

    E-Print Network [OSTI]

    de Leon, Alex R.

    data, print and save. Preview mode will not allow saving the form in a way that guarantees proper form on a PC: 1. Complete one or two fields on the application form 2. Save 3. Open on a PC to ensure

  11. COMPUTER APPLICATIONS IN THE GEOSCIENCES For this lab, you will practice editing image files in Adobe Photoshop and construct a

    E-Print Network [OSTI]

    Smith-Konter, Bridget

    "Save Target As" (PCs) or "Save Image As" (Macs). Save the file to your Lab3 folder on \\\\geobase a different editing technique and save to a different file type (ex., .jpg, .ps, .tiff, .pdf,) . Image 1 it to the appropriate location. · Save your image as a jPEG file. Go to File Save As. Name your file Image_1

  12. Assessing deployment strategies for ethanol and flex fuel vehicles in the U.S. light-duty vehicle fleet

    E-Print Network [OSTI]

    McAulay, Jeffrey L. (Jeffrey Lewis)

    2009-01-01T23:59:59.000Z

    Within the next 3-7 years the US light duty fleet and fuel supply will encounter what is commonly referred to as the "blend wall". This phenomenon describes the situation when more ethanol production has been mandated than ...

  13. Pushing the Limits of Remote Online Diagnosis in FlexRay-based Networks Eric Armengaud1,2

    E-Print Network [OSTI]

    automotive innovations now stem from elec- tronic systems [1]. In modern upper class vehicles several cars into highly distributed control systems [2]. The use of these ECUs and especially values to a comprehensive picture of the car's surrounding). These distributed automotive control systems

  14. Modeling the Effect of Fuel Ethanol Concentration on Cylinder Pressure Evolution in Direct-Injection Flex-Fuel Engines

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    Modeling the Effect of Fuel Ethanol Concentration on Cylinder Pressure Evolution in Direct the fuel vaporization pro- cess for ethanol-gasoline fuel blends and the associated charge cooling effect from both measured and modeled cylinder pressure exhibit a monotonic correlation with the fuel ethanol

  15. T-723:Adobe Flash Player Multiple Bugs Let Remote Users Obtain Information, Conduct Cross-Site Scripting Attacks, and Execute Arbitrary Code

    Broader source: Energy.gov [DOE]

    An attacker can exploit this issue by enticing an unsuspecting victim into visiting a malicious website.

  16. Watt-Level Wireless Power Transfer Based on Stacked Flex Circuit Technology Xuehong Yu, Florian Herrault, Chang-Hyeon Ji, Seong-Hyok Kim, Mark G. Allen

    E-Print Network [OSTI]

    significant interest as a potential approach for contactless battery charging [1] [2] as well as data. It was measured to have an inductance of 17 H and a Q-factor of 50 at 300 kHz with an outer diameter of 5 cm with receiver coils and wirelessly charged when being coupled closely to the transmitter coils. The mechanism

  17. The flexDrive: an ultra-light implant for optical control and highly parallel chronic recording of neuronal ensembles in freely moving mice

    E-Print Network [OSTI]

    Voigts, Jakob

    Electrophysiological recordings from ensembles of neurons in behaving mice are a central tool in the study of neural circuits. Despite the widespread use of chronic electrophysiology, the precise positioning of recording ...

  18. Notice of Intent to Issue DOE N 314.1, DOE-Flex: DOE's Telework Program while Developing a Successor Order (5-6-11)

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-06T23:59:59.000Z

    This is to develop DOE N 3XX, which will establish the requirements and responsibilities for the Department's telework/flexiplace program.

  19. Soft lithography molding of polymer integrated optical devices: Reduction of the background residue

    E-Print Network [OSTI]

    Huang, Yanyi

    examples include mechanically flex- ible ``electronic paper''1 and high efficiency light-emitting diodes

  20. Find Clear

    Broader source: Energy.gov (indexed) [DOE]

    p align"left">

    Find Clear Slide Title Duration Status myMail@adobe.com http:Adobe.com More Info>>

  1. Web Conferencing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Web Conferencing Adobe Connect Web Conferencing Revision Date: November 18, 2013 Prepared by: William Fisher Contents Overview ......

  2. The mathcomp package for using Text Companion fonts in math mode *

    E-Print Network [OSTI]

    Mintmire, John W.

    .g., say \\usepackage[ppl]{mathcomp} to make mathcomp use the Adobe Palatino (ppl) text companion fonts

  3. S:\\Training & Development Coordinator\\Signage System\\Signage System 140618 Adobe.doc Revised: 6/18/2014 Page 1 of 26 MSU Hazard Warning Signage System

    E-Print Network [OSTI]

    Dyer, Bill

    of duties requiring entry into potentially hazardous areas including, but not limited to educational areas") at MSU. Montana State University believes that a Hazard Warning Signage System (HWSS process for warning individuals who enter University potentially hazardous areas about the known potential

  4. The Evolution of an Industrial Marketing Program

    E-Print Network [OSTI]

    Breeden, K.

    Multiple #31;les are bound together in this PDF Package. Adobe recommends using Adobe Reader or Adobe Acrobat version 8 or later to work with documents contained within a PDF Package. By updating to the latest version, you?ll enjoy the following...

  5. advanced ground intelligent: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Hearn, Robert A. 2004-06-16 8 FlexRAM: Toward an Advanced Intelligent Memory System Computer Technologies and Information Sciences Websites Summary: FlexRAM: Toward an...

  6. Work Authorization Document NSTX Upgrade Project

    E-Print Network [OSTI]

    Princeton Plasma Physics Laboratory

    joint (flex bus assembly), the OH solenoid, the shaping coils, and the center stack casing. This WBS

  7. FUPWG Meeting Agenda - Providence, Rhode Island | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PDFs. Download Adobe Reader. Tuesday, April 13, 2010 FUPWG held a utility energy service contract (UESC) workshop prior to the Spring 2010 meeting. The workshop materials are...

  8. --No Title--

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    topOutsetlong leftOutsetlong bottomOutsetlong rightOutsetlong8BIM( ?8BIM8BIM -k DJFIFHH AdobeCMAdobed k"?...

  9. Climate VISION: Private Sector Initiatives: Chemical Manufacturing...

    Office of Scientific and Technical Information (OSTI)

    Resources & Links Technical Information Publications Case Studies CD-ROMs Publications The following publications are available for download as Adobe PDF documents. Download...

  10. Climate VISION: Private Sector Initiatives: Aluminum: Resources...

    Office of Scientific and Technical Information (OSTI)

    Resources & Links Technical Information Publications Case Studies Publications Some of the following publications are available for download as Adobe PDF documents. Download...

  11. Climate VISION: Private Sector Initiatives: Iron and Steel: Resources...

    Office of Scientific and Technical Information (OSTI)

    Resources & Links Technical Information Publications Case Studies CD-ROMs Publications Some of the following publications are available for download as Adobe PDF documents....

  12. Mid-Atlantic Region Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

  13. Midwest Region Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs. 

  14. Northwest Region Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

  15. Pacific Region Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

  16. agile bandwidth management: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EXPANSION Jinyu Han EECS department Northwestern University Gautham J. Mysore Advanced Technology Labs Adobe Systems Inc. Bryan Pardo EECS department Northwestern University. In...

  17. acionados por fonte: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    produced by fnsymbol will always match the text font family.g., say usepackagepplmathcomp to make mathcomp use the Adobe Palatino (ppl) text companion fonts The...

  18. acionados por fontes: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    produced by fnsymbol will always match the text font family.g., say usepackagepplmathcomp to make mathcomp use the Adobe Palatino (ppl) text companion fonts The...

  19. algumas fontes naturais: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    produced by fnsymbol will always match the text font family.g., say usepackagepplmathcomp to make mathcomp use the Adobe Palatino (ppl) text companion fonts The...

  20. Northeast Region Combined Heat and Power Projects

    Broader source: Energy.gov [DOE]

    DOE's Regional CHP Technical Assistance Partnerships (CHP TAPs) have compiled a select number of combined heat and power (CHP) project profiles, which are available as Adobe Acrobat PDFs.

  1. DEFINIR HOMEPAGE Tera-feira, 28 de Maio de 2013

    E-Print Network [OSTI]

    Instituto de Sistemas e Robotica

    dinossauro estão na Lourinhã Sismos: Técnicas tornam casas de adobe mais seguras Cientistas encontram sangue

  2. A panel of ten microsatellite loci for the Chagas disease vector Rhodnius prolixus (Hemiptera: Reduviidae)

    E-Print Network [OSTI]

    Steve Kemp

    , Universidad de Carabobo, Nucleo Aragua, and the Ministerio de Salud y Desarrollo Social, Instituto de Altos of Chagas disease in Venezuela, where it is found colonising rural housing consisting of unplastered adobe rural houses often formed from unplastered adobe walls with palm and/or metal roofs (Aché and Matos

  3. Attachment B PP/OP 05.09

    E-Print Network [OSTI]

    Gelfond, Michael

    (IN MMBTUS): Sufficient MMBtu's to satisfy full Gas Requirements of Buyer DELIVERY POINT: Natural gas pipeline interconnection of Northern Natural Gas Company and PowerTex/Adobe, Hockley County, Texas transportation charges from Power-Tex/Adobe (MarkWest) utility for service from the Citygate to the campus. Gas

  4. Reference number ISO 8601:2004(E)

    E-Print Network [OSTI]

    Wu, Shiliang

    Reference number ISO 8601:2004(E) © ISO 2004 INTERNATIONAL STANDARD ISO 8601 Third edition 2004'heure #12;ISO 8601:2004(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems

  5. E85 Infrastrucutre Development Project

    Broader source: Energy.gov [DOE]

    Burl Haigwood's presentation on the Flex fuel vehicle awareness campaign from the May 12, 2011, Clean Cities and Biomass Program State webinar.

  6. Quarterly Biomass Program/Clean Cities State Web Conference:...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    vann.pdf More Documents & Publications Flex Fuel Vehicle Systems E85 Infrastrucutre Development Project U.S. Department of Energy Fleet Alternative Fuel Vehicle Acquisition Report...

  7. aqueous fine cleaning: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Utilization Websites Summary: 2014 Vehicle Buyer's Guide Clean Cities Natural Gas Propane Biodiesel Electric Hybrid Ethanol Flex This Guide . . . . . . . . . . . . . 5 Compressed...

  8. Nicolas Navet, INRIA / RTaW Aurlien Monot, LORIA / PSA

    E-Print Network [OSTI]

    Navet, Nicolas

    that performance requirements are met: deadlines, jitters, throughput ­ Select the hardware / software components : CAN, AFDX, FlexRay, SpaceWire, industrial Ethernet, TTP, etc ... ­ Verification techniques

  9. V-076: Cisco Wireless LAN Controller Bugs Let Remote Users Deny...

    Office of Environmental Management (EM)

    Services Routers (ISRs) Cisco Catalyst 3750G Integrated WLCs Cisco Flex 7500 Series Cloud Controller Cisco Virtual Wireless Controller Cisco Wireless Controller Software for...

  10. Secretary Chu Announces New Funding and Partnership with Google...

    Office of Environmental Management (EM)

    of electric vehicles and chargers, E85 flex fuel vehicles and infrastructure, biodiesel facilities that turn used cooking oil into vehicle fuel, natural gas vehicles, and...

  11. Product Sheet Wall Mount Lift

    E-Print Network [OSTI]

    Saskatchewan, University of

    Product Sheet Wall Mount Lift Ergotron® Neo-FlexTM 870-05-061, rev. 12/11/07 www. Less effort. Feel the difference. Add greater range of movement to your LCD display or TV with the Neo-Flex Wall Mount Lift! CF patented lift-and-pivot motion technology adjusts with a light touch. Raise

  12. Upgrade LCDs or TVs with improved ergonomic adjustability

    E-Print Network [OSTI]

    Saskatchewan, University of

    Highlights · Upgrade LCDs or TVs with improved ergonomic adjustability · Constant Force (CFTM) patented lift-and-pivot motion technology produces smooth adjustment · Neo-Flex LCD Stand is the only range of movement to your LCD display or TV with the Neo-Flex LCD Stand! This proven technology is now

  13. North Carolina FY 2007-2008 Petroleum Displacement Program Report for the Joint Legislative Commission on Governmental Operations

    E-Print Network [OSTI]

    .3 % was displaced through biodiesel use. 0.2 % was added through a decrease in CNG and propane use. 0 technology vehicles with new vehicle purchases of 61 electric vehicles, 12 hybrid-electric vehicles, 1,115 flex-fueled vehicles, and 110 diesel vehicles that can use biodiesel. Flex fuel vehicles now comprise

  14. ASC Logo Use Guidelines | National Nuclear Security Administration

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EPS Format The file below contains the EPS format in Adobe Illustrator(tm) for use by graphic designers who produce multi-color documents for offset printing. The EPS logos are...

  15. Proposals with computer/laptop and software purchases: In order to use agency funds to pay for computers, software and peripherals,

    E-Print Network [OSTI]

    Kurapov, Alexander

    graphics output functions for wave-energy modeling. Funds have been requested to purchase a computer as processing of vector and raster graphics. Funds are requested to purchase Adobe SpeedGrade CS6 to enable

  16. SHERRY A. SEYBOLD 2115 Hellings Avenue Home: 510/236-9310

    E-Print Network [OSTI]

    Ajo-Franklin, Jonathan

    reported to Department of Energy. · Create and prepare graphics, complex charts and figures in many graphics, digital imaging, layout and web applications (Adobe Illustrator, Photoshop, In, books, magazines, and displays. · Responsible for design, production and implementation of graphics

  17. Career Center programs are provided without regard to race, color, religion, origin, sex, sexual orientation, marital status, age and/or disability. Reasonable accommodations for

    E-Print Network [OSTI]

    Su, Xiao

    Child Development Center Chipotle Christmas in the Park Cinequest, Inc. Cinergy Technology, Inc. Cirtec Associates, Inc. Classic Vacation Coach Cognizant Technology Solotions Coherent, Inc. Comerica Commissioning. Adobe Systems, Inc. Aerotek AF Gomes, Inc. Agilent Technologies Akamai Technologies Akria Technologies

  18. Related Articles: 2008 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2008 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs.

  19. Related Articles: 2009 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2009 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs.

  20. Related Articles: 2010 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2010 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs.

  1. Related Articles: 2007 Archive

    Broader source: Energy.gov [DOE]

    This page provides links to 2007 articles describing the latest developments in the area of solid-state lighting. Some of the following documents are available as Adobe Acrobat PDFs.

  2. T-661: ColdFusion Security Hotfix | APSB11-14, ColdFusion Important...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    and UNIX. These vulnerabilities could lead to a cross-site request forgery (CSRF) or a remote denial-of-service (DoS). Adobe recommends users update their product installation...

  3. STATE OF NEW JERSEY COUNCIL OF NEW JERSEY STATE COLLEGE LOCALS,

    E-Print Network [OSTI]

    Rainforth, Emma C.

    using Adobe Reader's search feature. #12;i TABLE OF CONTENTS ARTICLE PAGE PREAMBLE ........................................................................................1 I Recognition and Definition of Terms.....................................1 II Non hereto have entered into collective negotiations and desire to reduce the results thereof to writing, NOW

  4. Earthquake Preparedness 1 | P a g e (Rev. 2010-07-16)

    E-Print Network [OSTI]

    Groppi, Christopher

    battery or standby charge device for your phone. During an Earthquake If You Are Indoors: · Stay where you are in an unreinforced building, such as an adobe house. Doors swing during earthquakes and you could be injured trying

  5. --No Title--

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Adobed

  6. Position Announcement for Certification Associate (Posted February 28, 2014)

    E-Print Network [OSTI]

    Silver, Whendee

    and/or experience in materials chemistry, chemical hazard/risk assessment, materials reutilization concepts, energy accounting and renewable energy credits, green house gas of standard office software (MS Office suite, Adobe Acrobat, Google apps

  7. Evaluation of Various Herbicides for Saw Greenbrier [Smilax bona-nox L.] and Southern Dewberry [Rubus trivialis Michx.] Control and Bermudagrass [Cynodon dactylon (L.) Pers.] Tolerance and Sharppod Morningglory [Ipomoea trichocarpa var. trichocarpa Ell.] Control in Roundup Ready Flex® and LibertyLink® Cotton Systems

    E-Print Network [OSTI]

    Janak, Travis Wayne

    2012-02-14T23:59:59.000Z

    evaluated included glyphosate, glufosinate, prometryn, fluometuron, and diuron. Visual ratings of percent weed control and sharppod morningglory plant counts were taken to assess control. Prometryn at 1.8 kg ai ha?¹ and fluometuron at 1.8 kg ai ha...

  8. Essays in Behavioral Economics and Environmental Policy

    E-Print Network [OSTI]

    Sexton, Steven E.

    2012-01-01T23:59:59.000Z

    flex-fuel fleet), and hybrid cars (like the Prius, the HondaStates; 48% of the 290,271 hybrid cars sold in the U.S. indescribed by Khan, with hybrid cars enjoying greater market

  9. Direct Visualization of Spray and Combustion Inside a DI-SI Engine...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Visualization of Spray and Combustion Inside a DI-SI Engine and Its Implications to Flex-Fuel VVT Operations Direct Visualization of Spray and Combustion Inside a DI-SI Engine and...

  10. Layer-by-layer Assembly of Nanobrick Wall Ultrathin Transparent Gas Barrier Films

    E-Print Network [OSTI]

    Priolo, Morgan Alexander

    2012-07-16T23:59:59.000Z

    to cracking when flexed, require special, non-ambient processing environments, and can involve complex fabrication when layered with polymers. The addition of clay into polymers can enhance barrier properties relative to the neat polymer; however...

  11. Validation of Novel Planar Cell Design for MW-Scale SOFC Power Systems

    SciTech Connect (OSTI)

    Scott Swartz; Lora Thrun; Gene Arkenberg; Kellie Chenault

    2011-09-30T23:59:59.000Z

    This report describes the work completed by NexTech Materials, Ltd. during a three-year project to validate an electrolyte-supported planar solid oxide fuel cell design, termed the FlexCell, for coal-based, megawatt-scale power generation systems. This project was focused on the fabrication and testing of electrolyte-supported FlexCells with yttria-stabilized zirconia (YSZ) as the electrolyte material. YSZ based FlexCells were made with sizes ranging from 100 to 500 cm{sup 2}. Single-cell testing was performed to confirm high electrochemical performance, both with diluted hydrogen and simulated coal gas as fuels. Finite element analysis modeling was performed at The Ohio State University was performed to establish FlexCell architectures with optimum mechanical robustness. A manufacturing cost analysis was completed, which confirmed that manufacturing costs of less than $50/kW are achievable at high volumes (500 MW/year). DISCLAIMER

  12. Final Report, Validation of Novel Planar Cell Design for MW-Scale SOFC Power Systems

    SciTech Connect (OSTI)

    Swartz, Dr Scott L.; Thrun, Dr Lora B.; Arkenberg, Mr Gene B.; Chenault, Ms Kellie M.

    2012-01-03T23:59:59.000Z

    This report describes the work completed by NexTech Materials, Ltd. during a three-year project to validate an electrolyte-supported planar solid oxide fuel cell design, termed the FlexCell, for coal-based, megawatt-scale power generation systems. This project was focused on the fabrication and testing of electrolyte-supported FlexCells with yttria-stabilized zirconia (YSZ) as the electrolyte material. YSZ based FlexCells were made with sizes ranging from 100 to 500 cm2. Single-cell testing was performed to confirm high electrochemical performance, both with diluted hydrogen and simulated coal gas as fuels. Finite element analysis modeling was performed at The Ohio State University was performed to establish FlexCell architectures with optimum mechanical robustness. A manufacturing cost analysis was completed, which confirmed that manufacturing costs of less than $50/kW are achievable at high volumes (500 MW/year).

  13. ATM S 111: Global Warming Review Sheet for Final Exam

    E-Print Network [OSTI]

    Frierson, Dargan

    is worse than oil, natural gas is the best of the 3 fossil fuels o The wedge additive in US but can be used in "flex fuel" vehicles to power entirely, corn

  14. Flexible dynamics of floating wind turbines

    E-Print Network [OSTI]

    Luypaert, Thomas (Thomas J.)

    2012-01-01T23:59:59.000Z

    This work presents Tower Flex, a structural dynamics model for a coupled analysis of offshore floating wind turbines consisting of a tower, a floating platform and a mooring system. In this multi-body, linear frequency-domain ...

  15. Sandia National Laboratories: NMSBA

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by the New Mexico Small Business Assistance (NMSBA) on "Subsea Modeling of an Innovative Wave Energy Array Using OrcaFlex Software," in which we supported developing and modeling...

  16. 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim 1 www.advmat.de

    E-Print Network [OSTI]

    Wang, Zhong L.

    such as high sensitivity, short Debye length comparable to the target molecules, and low power consumption.[1 and transferred onto a flex- ible polyethylene terephthalate (PET) substrate (1 cm Ã? 5 cm, 220 m in thickness

  17. Guidance Document Glove boxes allow the user to perform operations in an atmosphere different from the ambient. Gloves

    E-Print Network [OSTI]

    for handling air- and/or water-reactive materials (e.g. organometallics in Chemistry or lithium metal are capped when not in use. The flexing of the gloves, deterioration from corrosives, exposure to UV light

  18. Neuropathic pain and the inhibition of learning within the spinal cord

    E-Print Network [OSTI]

    Ferguson, Adam Richard

    2004-09-30T23:59:59.000Z

    , and tested 24 h after surgery. If animals are given shock when their leg is in a resting position (controllable shock), they quickly learn to maintain the leg in a flexed position, thereby minimizing shock exposure. Animals exposed to shock...

  19. Role of the opioid system in the behavioral deficit observed after uncontrollable shock

    E-Print Network [OSTI]

    Washburn, Stephanie Nicole

    2006-08-16T23:59:59.000Z

    to minimize shock exposure by maintaining a hindlimb in a flexed position. Preexposure to uncontrollable shock (shock independent of leg position) disrupts this learning. Activation of opioid receptors seems to contribute to the expression of the behavioral...

  20. Highlights 150 Semana 23 27 de Agosto, 2010

    E-Print Network [OSTI]

    attractive. FLEX TIME Made from light-sensitive polymers, lightweight flexible photovoltaic sheets (such -- just as an electron orbits a proton in the Bohr model of a hydrogen atom. Figure 1: The apparatus

  1. Field of Expertise RESEARCH TOPICS

    E-Print Network [OSTI]

    supply in electric vehicles Fuel cell development, monitor Doppler Laboratory for Fuel Cell Systems Research Studio Austria Flex Fuel Reformer for Fuel Cell Systems Process technology Resources, auxiliaries and utilities Alternative fuels TRAINING AND FURTHER EDUCATION

  2. Flexible Carpooling: Exploratory Study

    E-Print Network [OSTI]

    Dorinson, Diana; Gay, Deanna; Minett, Paul; Shaheen, Susan

    2009-01-01T23:59:59.000Z

    has been confused with car sharing (for example FlexCar,a former Seattle based car sharing company in which membersprograms. One was with a car sharing company that provided

  3. Fabrication and characterization of microscale sandwich beams

    E-Print Network [OSTI]

    Kenis, Paul J. A.

    /metal cores were produced through fabrication methods that combined photolithography and electrodeposition prototyping strategy consisting of photolithographic, electrodeposition, and face-sheet bonding steps sandwiched between two sheets of nickel. We also investigate the structural response--load, flex- ural

  4. affects cotton plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    picked and stripped cotton... km west of Plains, Texas. The field was located on a Brownfield fine sand, and Stoneville 4554 Bollgard II ? Roundup Ready Flex ? (ST 4554 B2RF) was...

  5. technology offer Non-Intrusive Remote Oscillator Measurement for

    E-Print Network [OSTI]

    Szmolyan, Peter

    technology offer Non-Intrusive Remote Oscillator Measurement for Distributed Systems based on Flex are quite intrusive: they require physical access to each single node and might interrupt system operation

  6. Clean Cities Publishes 2014 Vehicle Buyer's Guide | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    flex-fuel vehicles, and vehicles that run on natural gas, propane, electricity, or biodiesel. This new guide features a comprehensive list of this year'ss light-duty lineup,...

  7. Automotive communication systems : from dependability to security

    E-Print Network [OSTI]

    Navet, Nicolas

    . protocols, multi-layered run-time environment (AUTOSAR), multi-source software, multi-core CPUs, number of variants, etc #12;BMW 7 Series networking architecture [10] ZGW = central gateway 4 CAN buses 1 FlexRay Bus

  8. 4/5/2014 Turbinados | Um canceriano sem lar. http://edsonjnovaes.wordpress.com/2014/04/02/turbinados/ 1/3

    E-Print Network [OSTI]

    Chiao, Jung-Chih

    , energia dos ventos, energia limpa, energy, engineering, environmental sensing, Estados Unidos, flexível-windmills to recharge cell phones Veja também: Miniusina de energia, Computer History Museum, Viabilidade???, Manual de

  9. Flexible Capital Fund (Vermont)

    Broader source: Energy.gov [DOE]

    The Vermont Sustainable Jobs Fund's Flexible Capital Fund (the “Flex Fund”) is designed for companies in Vermont's rural areas that are smaller and work on a less-than global scale, offering a...

  10. 2014-2015 INCOMING STUDENT HOUSING AND BOARD CONTRACT THIS CONTRACT IS BINDING FOR THE FALL AND SPRING SEMESTERS OF THE ACADEMIC YEAR

    E-Print Network [OSTI]

    Bogaerts, Steven

    in the CDR) and 100 Bonus Points: SEMESTER-$2,387, TOTAL YEAR-$4,774 ( ) 225 Flex Meal Plan (average of 14 meals per week) and 100 Bonus Points: SEMESTER-$2,088, TOTAL YEAR- $4,176 Each bonus point is valued and snacks plus 100 Bonus Points, or the 225 Flex Plan plus 100 Bonus Points, which is an average of 14 meals

  11. Physics Pathway: A Digital Library Filled with Synthetic Interviews*

    E-Print Network [OSTI]

    Christel, Mike

    Physics Pathway: A Digital Library Filled with Synthetic Interviews* Michael G. Christel-412-268-7796 sms@cs.cmu.edu Dean Zollman Department of Physics Kansas State University Manhattan, KS 66506 1-785-532-1619 dzollman@phys.ksu.edu ABSTRACT Physics Pathway is a digital library available through an Adobe Flash portal

  12. Masters Engineering ELITE Programme Applying Innovation in Engineering University of Toronto APS1013

    E-Print Network [OSTI]

    Toronto, University of

    of the tools and techniques of innovation management including; strategic and systems thinking, business per team) ! Apply the 17 step Innovation Process Management Methodology ­ Attend 2-3 hours training and a soft copy of the paper (using Microsoft Word, NOT an Adobe Acrobat PDF!) must be delivered by email

  13. Production of Teaching Material for Undergraduates

    E-Print Network [OSTI]

    Cameron, Peter

    onto transparency for use on an OHP. The package is designed to use sans serif fonts for text because, and the default to two column format. To use this all you need do is place the file smallslides.cls in your tex to Mac users. Many of us do not have Adobe Acrobat and Distiller installed on our machines, so Wilfrid

  14. Last Updated: May 7, 2013 (wr) Before you begin your application for promotion and/or tenure, please read the following instructions /

    E-Print Network [OSTI]

    Hemmers, Oliver

    and ready to submit in final form), please sign the application with a digital signature. This will lock your .pdf to prevent any further changes as the form goes through the review process. Recommendation Version: Create a Digital Signature to Lock and then Save the file 1. If you have an Adobe digital ID

  15. An Interactive Flash Website for Oral Histories* Michael G. Christel

    E-Print Network [OSTI]

    Christel, Mike

    -tested with The HistoryMakers and Harrisburg Living Legacy oral history archives, showing the value of an Adobe Flash oral histories, and the Highmark Blue Shield Living Legacy Series, Harrisburg, PA, recording the memories of 150 Harrisburg area residents in celebration of the city of Harrisburg's 150 years

  16. STANFORD HISTORICAL SOCIETY FOR IMMEDIATE RELEASE April 2014

    E-Print Network [OSTI]

    Straight, Aaron

    the old road's condition, which went from knee-deep dust in summer to nearly impassible adobe mud after winter rains," Cottle writes. Stanford's base map has changed repeatedly since construction, construction, and traffic flow. Since the first edition, Lane A, a service road off Campus Drive, has had its

  17. Chase Field Civic Space

    E-Print Network [OSTI]

    Shumway, John

    .E. England Building AEEB 3C 424 N. Central Ave. Arizona Center for Law and SocietyACLS 3D 111 E. Taylor St Shuttle A B C D E F G H 1 2 3 4 5 6 7 ASU Layered Map *The layer view option is only available with Adobe

  18. This document is scheduled to be published in the Federal Register on 08/26/2013 and available online at

    E-Print Network [OSTI]

    accurately reflect actual bycatch in New England sink gillnets due to fishery-wide changes in fishing). Attachments to electronic comments will be accepted in Microsoft Word, Excel, or Adobe PDF file formats only planning process can be downloaded from the Plan web site at http://www.nero.noaa.gov/hptrp/. Copies

  19. 159.235 Graphics 1 159.235 Graphics & Graphical

    E-Print Network [OSTI]

    Hawick, Ken

    159.235 Graphics 1 159.235 Graphics & Graphical Programming Lecture 1 - GRAPHICS Overview #12;159.235 Graphics 2 What's this course all about? Not! Paint and Imaging packages (Adobe Photoshop) Cad packages (Digimation) Graphics APIs (OpenGL) Graphics Modelling and Languages (RenderMan) #12;159.235 Graphics 3 What

  20. Thank you for joining: Managing Up

    E-Print Network [OSTI]

    Vertes, Akos

    Thank you for joining: Managing Up: The secret to exceeding expectations, navigating transitions with Adobe Connect, please call 18004223623. #12;Managing Up: The secret to exceeding expectations is your situation? #12;Managing Up ­ 3 Key Questions 1. Why do it? 2. What is it? 3. How do you do it? #12

  1. Soda Lake Well Lithology Data and Geologic Cross-Sections

    SciTech Connect (OSTI)

    Faulds, James E.

    2013-12-31T23:59:59.000Z

    Comprehensive catalogue of drill?hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. Plus, 13 cross?sections in Adobe Illustrator format.

  2. Efficient Coding and Bayesian Estimation with Neural Populations

    E-Print Network [OSTI]

    Simoncelli, Eero

    being down to ride bikes and chill at Le Basket; and Rob Young, for fixing my computer every time papers, helping me put together talks, teaching me Adobe Illustrator and aspects of design so I could, but are first convolved with a linear filter then exponentiated. We map this simple cascade onto a compact

  3. UNL College of Architecture 2012 -2013 Required Software: Help Sheet

    E-Print Network [OSTI]

    Farritor, Shane

    .99 Mac users have the option to purchase Office 2008 for OS X. This includes Word, Excel, Power: Design Premium is available for purchase at the University Computer Store in the 501 Building (402 with Adobe. Because of this students in the Omaha program should purchase their licenses directly through

  4. Attaching UI Enhancements to Websites with End Users Michael Toomim1, Steven M. Drucker2, Mira Dontcheva3, Ali Rahimi4, Blake Thomson1, James A. Landay1Michael Toomim1, Steven M. Drucker2, Mira Dontcheva3, Ali Rahimi4, Blake Thomson1, James A. Landay1Mich

    E-Print Network [OSTI]

    Anderson, Richard

    mirad@adobe.com 4Intel Research Berkeley ali.rahimi@intel.com ABSTRACT We present reform, a system scraper. Instead they use reform, which allows novice end users to attach the enhancement to their favorite sites with a scraping by-example interface. reform makes en- hancements easier to program while

  5. Loomis Grammar School 3505 Taylor Road, Loomis

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    the industry standard Adobe Premiere Pro. July 15-19 · Aquaponics & Agriscience: Grades 5-8 This week long class will highlight principles of agriscience using Del Oro High School's aquaponics system and school farming techniques, biotechnology and the economics of food production. The aquaponics system

  6. BOSTON COLLEGE WOMEN'S RESOURCE CENTER

    E-Print Network [OSTI]

    Huang, Jianyu

    and time to be agreed upon by staff). Coordinate campus-wide projects and programs on a variety of women, filing, operating phones) Demonstrate some computer skills (specifically MS Word, Excel, PowerPoint, Publisher; preferred Adobe InDesign, Photoshop, and web design) #12;BOSTON COLLEGE WOMEN'S RESOURCE CENTER

  7. Structural Bioinformatics Fall Semester, 2007

    E-Print Network [OSTI]

    Kerrigan, John, E.

    : on other unix systems you will need to use gunzip first, then tar ­xvf to untar the tarball.) followed to download. tar ­zxvf vmdtutorial.tar.gz rm vmdtutorial.tar.gz Use xpdf in Linux or Adobe Acrobat protein of interest to you). In addition, download a nucleic acid PDB file from the nucleic acids

  8. available to OSU students at any can be accessed from any computer

    E-Print Network [OSTI]

    Veiga, Pedro Manuel Barbosa

    a citation. WHERE TO SAVE DOCUMENTS #12;1 4 2 · In Microsoft Office, i.e. Word, Excel, PowerPoint,: click File Save As... · In Adobe, i.e. PDF documents,: at the top left, click Find the "Save In" drop down arrow. Select the location where you want your document saved. · For floppy/diskette select "3 1/2 in

  9. 2012 Undergraduate Research & Artistry Day Poster Printing Instructions

    E-Print Network [OSTI]

    Karonis, Nicholas T.

    an accurate account of your work, this must be saved both as a PDF and JPEG file. How to save as a PDF: How to save as a JPEG: Open PPT document Return to the original PPT file, Click "Office" Button Click "Office" Button Select "Save As" Select "Save As" Select Adobe PDF

  10. June 6, 2007 Large-Scale Scientific Computations'07, Sozopol, Bulgaria -p. 1/29 Multiscale Modeling and Simulation of Fluid

    E-Print Network [OSTI]

    Popov, Peter

    in porous media (soil, porous rocks, etc.) x Elasticity problems in composite materials (adobe, concrete/29 Presentation outline s Brief overview of upscaling methods in deformable porous media s The Fluid upscaling of flow in deformable porous media #12;June 6, 2007 Large-Scale Scientific Computations'07

  11. Residential Thermal Mass Construction

    E-Print Network [OSTI]

    Thieken, J. S.

    1988-01-01T23:59:59.000Z

    The southwest has long known the value of building homes with high mass materials. The ancient Pueblo Indians found that by using "adobe" they could capture the energy necessary to survive the harsh desert climate. Our ancestors knew that a heavy...

  12. GATEWAY Demonstration Special Reports

    Broader source: Energy.gov [DOE]

    DOE shares the results of completed GATEWAY demonstration projects, publishing detailed reports that include analysis of data collected, projected energy savings, economic analyses, and user feedback. Report briefs summarize key findings in a quick-scan format. Both the reports and briefs are available as Adobe Acrobat PDFs.

  13. Ellucian Product Banner, Colleague, PowerCAMPUS, Luminis and Datatel are trademarks of Ellucian or its affiliates and are registered in the U.S. and other

    E-Print Network [OSTI]

    Lotko, William

    a document? To locate a topic or term within a document, you can set up a search: 1 Go to View > Show the document you want to search. 3 Enter keyword(s) in the Find box. Adobe Reader will highlight words search a document? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 How do I set

  14. South Of Espanola; North Of Pojoaque At Intersection of NM399 and US 84/285 Turn onto 399(WSW),

    E-Print Network [OSTI]

    Kurien, Susan

    will be on your left, Go to third house on right (#18 on fence), 1.5 story adobe with passive solar Windows facing at Affordable Price Or Possible Lease or Lease to Purchase 18 Terrace Farm Rd LaMesilla, NM 2 story passive the Puye Ruins on Santa Clara Pueblo. House is oriented with huge solar windows facing due south toward

  15. HEGIS CLASSIFICATIONS (THIS DOCUMENT IS KEYWORD SEARCHABLE

    E-Print Network [OSTI]

    Segraves, Kari A.

    HEGIS CLASSIFICATIONS (THIS DOCUMENT IS KEYWORD SEARCHABLE USING THE "FIND" TOOL IN YOUR ADOBE, research projects, etc. having to do with the production of food and management of natural fiber, plant, forest, and wildlife resources. 0101 Agriculture, general 0102 Agronomy (field crops, crop management

  16. Rehabilitation of notch damaged steel beam using a carbon fiber reinforced multiphase-matrix composite

    SciTech Connect (OSTI)

    Zhou, HongYu [Arizona State University; Attard, Dr. Thomas L. [Arizona State University; Wang, Yanli [ORNL; Wang, Jy-An John [ORNL; Ren, Fei [ORNL

    2013-01-01T23:59:59.000Z

    The retrofit of notch damaged steel beams is investigated via the experimental testing of nine wide-flange steel beam specimens and finite element simulation. Three notch configurations representing various damage levels were identified, and the beam specimens were retrofitted using CFRP laminates and a recently developed polymeric matrix composite - CarbonFlex - that exhibits superior energy dissipation and ductility properties, where the peak-load deflections were between 49.4% and 65.2% higher using the CarbonFlex-retrofitted beams. The results are attributed to the substantially higher damage tolerance capability of CarbonFlex than conventional CFRP. Finite element models were developed to investigate the damage processes and strain/ stress distributions near the notch tips. The numerical results match closely with the experimentally determined load-deflection curves and the strain fields obtained by the digital imaging correlations (DIC) system. Both experimental and numerical results clearly indicate the effectiveness of CarbonFlex, as a candidate retrofitting material, to retrofit damaged steel structures. Lastly, the micro-mechanisms by which CarbonFlex could sufficiently sustain a significant amount of the peak strength at large displacement ductility values are discussed with the aid of scanning electron microscopy (SEM) pictures.

  17. A zero-length bellows for the PEP-II High-Energy Ring

    SciTech Connect (OSTI)

    Nordby, M.; Daly, E.F.; Kurita, N.; Langton, J.

    1995-08-01T23:59:59.000Z

    Due to the beamline space constrictions and the modular design of the vacuum system, a conventional bellows can not be used everywhere in the PEP-II High-Energy Ring (HER) arcs. A zero-length ``Flex Flange`` was developed which actually performs better than a more standard bellows. The Flex Flange fits the space available while still preserving the modularity of the system. Furthermore, the design provides for an accurate match-up between adjoining octagonal copper chambers despite the large fabrication and assembly tolerances and high operational loads. Beam chamber continuity is ensured by an integral RF seal ring which is easy to install and fault-tolerant. Heating from synchrotron radiation and higher-order mode trapping is managed to ensure a robust connection despite the 3,000 mA beam current of the PEP-II HER. The Flex Flange concept is versatile and adaptable to many applications, yet economical both in space needed and cost.

  18. Stretchable form of single crystal silicon for high performance electronics on rubber substrates

    DOE Patents [OSTI]

    Rogers, John A. (Champaign, IL); Khang, Dahl-Young (Seoul, KR); Sun, Yugang (Naperville, IL); Menard, Etienne (Durham, NC)

    2012-06-12T23:59:59.000Z

    The present invention provides stretchable, and optionally printable, semiconductors and electronic circuits capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Stretchable semiconductors and electronic circuits of the present invention preferred for some applications are flexible, in addition to being stretchable, and thus are capable of significant elongation, flexing, bending or other deformation along one or more axes. Further, stretchable semiconductors and electronic circuits of the present invention may be adapted to a wide range of device configurations to provide fully flexible electronic and optoelectronic devices.

  19. Stretchable form of single crystal silicon for high performance electronics on rubber substrates

    DOE Patents [OSTI]

    University of Illinois (Urbana, IL)

    2009-04-21T23:59:59.000Z

    The present invention provides stretchable, and optionally printable, semiconductors and electronic circuits capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Stretchable semiconductors and electronic circuits of the present invention preferred for some applications are flexible, in addition to being stretchable, and thus are capable of significant elongation, flexing, bending or other deformation along one or more axes. Further, stretchable semiconductors and electronic circuits of the present invention may be adapted to a wide range of device configurations to provide fully flexible electronic and optoelectronic devices.

  20. Controlled buckling structures in semiconductor interconnects and nanomembranes for stretchable electronics

    DOE Patents [OSTI]

    Rogers, John A. (Champaign, IL); Meitl, Matthew (Raleigh, NC); Sun, Yugang (Naperville, IL); Ko, Heung Cho (Urbana, IL); Carlson, Andrew (Urbana, IL); Choi, Won Mook (Champaign, IL); Stoykovich, Mark (Dover, NH); Jiang, Hanqing (Urbana, IL); Huang, Yonggang (Glencoe, IL); Nuzzo, Ralph G. (Champaign, IL); Lee, Keon Jae (Tokyo, JP); Zhu, Zhengtao (Rapid City, SD); Menard, Etienne (Durham, NC); Khang, Dahl-Young (Seoul, KR); Kan, Seong Jun (Daejeon, KR); Ahn, Jong Hyun (Suwon, KR); Kim, Hoon-sik (Champaign, IL)

    2012-07-10T23:59:59.000Z

    In an aspect, the present invention provides stretchable, and optionally printable, components such as semiconductors and electronic circuits capable of providing good performance when stretched, compressed, flexed or otherwise deformed, and related methods of making or tuning such stretchable components. Stretchable semiconductors and electronic circuits preferred for some applications are flexible, in addition to being stretchable, and thus are capable of significant elongation, flexing, bending or other deformation along one or more axes. Further, stretchable semiconductors and electronic circuits of the present invention are adapted to a wide range of device configurations to provide fully flexible electronic and optoelectronic devices.

  1. Controlled buckling structures in semiconductor interconnects and nanomembranes for stretchable electronics

    DOE Patents [OSTI]

    Rogers, John A; Meitl, Matthew; Sun, Yugang; Ko, Heung Cho; Carlson, Andrew; Choi, Won Mook; Stoykovich, Mark; Jiang, Hanqing; Huang, Yonggang; Nuzzo, Ralph G; Zhu, Zhengtao; Menard, Etienne; Khang, Dahl-Young

    2014-05-20T23:59:59.000Z

    In an aspect, the present invention provides stretchable, and optionally printable, components such as semiconductors and electronic circuits capable of providing good performance when stretched, compressed, flexed or otherwise deformed, and related methods of making or tuning such stretchable components. Stretchable semiconductors and electronic circuits preferred for some applications are flexible, in addition to being stretchable, and thus are capable of significant elongation, flexing, bending or other deformation along one or more axes. Further, stretchable semiconductors and electronic circuits of the present invention are adapted to a wide range of device configurations to provide fully flexible electronic and optoelectronic devices.

  2. Stretchable form of single crystal silicon for high performance electronics on rubber substrates

    SciTech Connect (OSTI)

    Rogers, John A.; Khang, Dahl-Young; Sun, Yugang; Menard, Etienne

    2014-06-17T23:59:59.000Z

    The present invention provides stretchable, and optionally printable, semiconductors and electronic circuits capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Stretchable semiconductors and electronic circuits of the present invention preferred for some applications are flexible, in addition to being stretchable, and thus are capable of significant elongation, flexing, bending or other deformation along one or more axes. Further, stretchable semiconductors and electronic circuits of the present invention may be adapted to a wide range of device configurations to provide fully flexible electronic and optoelectronic devices.

  3. For more information, please visit: http://seari.mit.edu

    E-Print Network [OSTI]

    de Weck, Olivier L.

    and Challenges Real Options Characterization Method Flexibility Metric for a Dependency Model Singapore Defense modeling Flex metric = number of terms in disjunctive normal form [(Insert Battery 1) AND (Insert Battery 2)] OR [(Insert Battery 1) AND (remove Battery 2)] Formula F is in DNF iff term Example: Real option: defined

  4. Htfiffi m'* Effects of Alternative Fuels on Vehicle Emissions

    E-Print Network [OSTI]

    , Chapel Hill, North Carolina 27514, USA rThe Joint Graduate School of Energy and Environrnent, King Mon operating on gasoline arrd a similar non-FF\\-. llir:s rs a in-al ethanol composition blend requires vehicle. Compadson of emissions from flex-fuel r.rhicles operating on EB5 with &e emissions from same vehicle

  5. CX-002724: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Area of Interest 3 Deployment of Flex Combined Heat and Power System (Funding Opportunity Announcement 0000016)CX(s) Applied: B3.6Date: 06/21/2010Location(s): Des Plains, IllinoisOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  6. CX-002723: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Area of Interest 3 Deployment of Flex Combined Heat and Power System (Funding Opportunity Announcement 0000016)CX(s) Applied: B3.6Date: 06/21/2010Location(s): El Centro, CaliforniaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  7. CX-002376: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan - MaltaCX(s) Applied: B3.6Date: 05/24/2010Location(s): Malta, New YorkOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  8. CX-002388: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan - Auburn HillsCX(s) Applied: B3.6Date: 05/24/2010Location(s): Auburn Hills, MichiganOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  9. CX-002380: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan - ChelseaCX(s) Applied: B3.6Date: 05/24/2010Location(s): Chelsea, MichiganOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  10. CX-002389: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advanced Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan - TroyCX(s) Applied: B3.6Date: 05/24/2010Location(s): Oakland County, MichiganOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  11. CX-002383: Categorical Exclusion Determination

    Broader source: Energy.gov [DOE]

    Advancing Plug-In Hybrid Technology and Flex Fuel Application on a Chrysler Minivan - YuccaCX(s) Applied: B3.6Date: 05/24/2010Location(s): Yucca, ArizonaOffice(s): Energy Efficiency and Renewable Energy, National Energy Technology Laboratory

  12. Clean Transportation Program | 919-515-3480 | www.ncsc.ncsu.edu How to tell if your vehicle is E85 compatible...

    E-Print Network [OSTI]

    .cleantransportation.org #12;E85 CAPABLE FLEX FUEL VEHICLES General Motors CONTINUED Make, Model, & Engine Size Year(s) 8th VIN Marquis (2-valve), 4.6L 2007-2011 V GENERAL MOTORS *2008 & 2009 FFV models have yellow fuel caps compatible... Check to see if your vehicle is listed below. Be certain to check the ENGINE SIZE

  13. Palkopoulou et al. VOL. 4, NO. 11/NOVEMBER 2012/J. OPT. COMMUN. NETW. B1 Quantifying Spectrum, Cost, and Energy

    E-Print Network [OSTI]

    Varvarigo, Emmanouel "Manos"

    . Index Terms--Cost analysis; Energy efficiency; Flexible optical networking; Optical OFDM. I, and Energy Efficiency in Fixed-Grid and Flex-Grid Networks [Invited] E. Palkopoulou, M. Angelou, D. Klonidis to achieve cost and energy efficiency. Additionally, the break-even cost of flexible orthogonal frequency

  14. Clean Transportation Program | 919-513-7831 | www.cleantransportation.org North Carolina State University, Campus Box 7401, Raleigh, NC 27695 | 919-515-3480 | www.ncsc.ncsu.edu | 10/28/13

    E-Print Network [OSTI]

    85 (85% ethanol/15% gasoline) fuel provider? There are approximately 14 million E85 capable flex are the differences between gasoline and ethanol fuels? E85 vapor is less flammable than gasoline (above 35o F). E85. Tests have shown that E85 reduces carbon monoxide as well as harmful hydrocarbon and benzene emissions

  15. Clean Transportation | www.nccleantech.ncsu.edu North Carolina State University, Campus Box 7401, Raleigh, NC 27695 | 919-515-3480 | www.nccleantech.ncsu.edu | 3/13/14

    E-Print Network [OSTI]

    , Raleigh, NC 27695 | 919-515-3480 | www.nccleantech.ncsu.edu | 3/13/14 Why become an E85 (85% ethanol/15 are the differences between gasoline and ethanol fuels? E85 vapor is less flammable than gasoline (above 35o F). E85% gasoline) fuel provider? There are approximately 14 million E85 capable flex-fuel vehicles (FFVs) on US

  16. Prioritizing Climate Change Mitigation Alternatives: Comparing Transportation Technologies to Options in Other Sectors

    E-Print Network [OSTI]

    Lutsey, Nicholas P.

    2008-01-01T23:59:59.000Z

    ethanol (with the remaining 15% gasoline). Up to now, few of these E85-ethanol’s somewhat lower energy content per volume. Increasingly so-called “flex-fuel” E85E85 vehicles would otherwise face. The reference case forecasts for the US include increases in ethanol

  17. Chris Barlow Department of Materials Science

    E-Print Network [OSTI]

    Kumar, Vipin

    Polycarbonate Foams The effect of density (relative densities 0.33 to 0.90) on the impact behavior of microcel- lular polycarbonate (PC) was investigated. Cell size and foaming gas content were also considered. Flexed-beam Izod impact tests were conducted and the impact strength of these foams appears

  18. Simultaneous multi-headed imager geometry calibration method

    DOE Patents [OSTI]

    Tran, Vi-Hoa (Newport News, VA); Meikle, Steven Richard (Penshurst, AU); Smith, Mark Frederick (Yorktown, VA)

    2008-02-19T23:59:59.000Z

    A method for calibrating multi-headed high sensitivity and high spatial resolution dynamic imaging systems, especially those useful in the acquisition of tomographic images of small animals. The method of the present invention comprises: simultaneously calibrating two or more detectors to the same coordinate system; and functionally correcting for unwanted detector movement due to gantry flexing.

  19. FLEXURAL RESPONSE TO SEDIMENT EROSION AND UNLOADING AT VALLES MARINERIS, MARS. B. J. Davis1

    E-Print Network [OSTI]

    the difference between the present-day surface topography within the troughs and 4000 m, where 4000 m was chosen that much of the topography and grav- ity surrounding the troughs can be explained by flex- ural uplift due Results. (a) MOLA topography. (b) Flexural uplift when Te = 50 km. (c) Te = 100 km. (d) Te = 50 km. All

  20. Isr. J. Earth Sci.; 55: 4353 2006 Science From Israel/ LPPLtd. 0021-2164/06 $4.00

    E-Print Network [OSTI]

    Ze'ev, Reches

    the fault- bounded blocks should remain undeformed. We present here field, experimental, and numerical structures that are related to faulting, for example, microcracks, gouge zones, joints, sec- ondary faults, planar layers prior to flexing (dashed thin lines on the right block). The spatial association

  1. U.S. Energy Information Administration (EIA) - Sector

    Gasoline and Diesel Fuel Update (EIA)

    gallon) 49.0 57.7 39.9 Flex-fuel vehicle stock in 2040 (millions) 20.9 44.3 20.0 Batter-electric vehicle costs Baseline Baseline - 14% Baseline Heavy-duty vehicles Vehicle...

  2. Agron. Sustain. Dev. 28 (2008) 345354 c INRA, EDP Sciences, 2008

    E-Print Network [OSTI]

    Boyer, Edmond

    2008-01-01T23:59:59.000Z

    for Development Research, Department of Ecology and Resource Management, University of Bonn, Walter-Flex-Str. 3Agron. Sustain. Dev. 28 (2008) 345­354 c INRA, EDP Sciences, 2008 DOI: 10.1051/agro:2008008 Original article Available online at: www.agronomy-journal.org for Sustainable Development Evaluation

  3. 40776 Federal Register / Vol. 75, No. 134 / Wednesday, July 14, 2010 / Notices frequency tuning in order to guarantee

    E-Print Network [OSTI]

    [A­520­803] Polyethylene Terephthalate Film, Sheet and Strip From the United Arab Emirates: Extension order on polyethylene terephthalate film, sheet and strip from the United Arab Emirates (UAE two producers and/or exporters of the subject merchandise to the United States: FLEX Middle East FZE

  4. Spring Constants for Hockey Dan Russell and Linda Hunt, Kettering University, Flint, MI

    E-Print Network [OSTI]

    Russell, Daniel A.

    . In a three-point bending test, a force F is applied at the midpoint between two supports separated in the blade. The flex rating is given as a number that roughly repre- sents the amount of force in pounds k represents an effective spring constant. The three-point bending test for measuring hockey stick

  5. Would have been consumed without measures indicated Actually consumed (2013-2014 projected) Adopted goal

    E-Print Network [OSTI]

    Barrett, Jeffrey A.

    by 30% in new construction Thermal energy storage Combined heat and power plant Statewide Energy Partnership expanded Statewide Energy Partnership launched Campus-funded energy projects Flex Your Power "Best Overall"Award Celebrating a Quarter Century of Energy Savings American College & University Presidents

  6. Puddle Dynamics and Air-to-Fuel Ratio Compensation for Gasoline-Ethanol Blends in

    E-Print Network [OSTI]

    Stefanopoulou, Anna

    1 Puddle Dynamics and Air-to-Fuel Ratio Compensation for Gasoline-Ethanol Blends in Flex-Fuel flexible fuel vehicles (FFVs) can operate on a blend of gasoline and ethanol in any concentration of up for gasoline-ethanol blends is, thus, necessary for the purpose of air-to-fuel ratio control. In this paper, we

  7. Documents de Travail du Centre d'Economie de la Sorbonne

    E-Print Network [OSTI]

    Boyer, Edmond

    Documents de Travail du Centre d'Economie de la Sorbonne How to manage a large and flexible nuclear #12;1 How to manage a large and flexible nuclear set in a deregulated electricity market from of a large nuclear set (like the French set), nuclear production needs to be flex- ible to adjust

  8. Never Let Me Down

    E-Print Network [OSTI]

    Shoshanna

    1992-01-01T23:59:59.000Z

    little. "Would you believe it? Shot the RT out of my hand. One in a million." And he flexed his fingers, wincing. Two knuckles were red and swollen, where they had been twisted by the impact "Need a doctor?" "Nah. Ice'll do it" Jax and Murphy were...

  9. Health coverage n There will be no changes to

    E-Print Network [OSTI]

    Rock, Chris

    , you must call the health plan provider to select a primary care physician (PCP). You and yourFlex (health and day care accounts) n Pay for medical, dental, and day care expenses with tax-free money. Budget for planned expenses and save money. n The maximum annual contribution to a health care account

  10. C A L I F O R N I A E N E R G Y C O M M I S S I O N E F F I C I E N C Y A N D R E N E W A B L E E N E R G Y D I V I S I O N

    E-Print Network [OSTI]

    -backed duct tapes with special butyl or synthetic adhesives rather than rubber adhesive to seal flex duct Committee determined that Shurtape Technologies' cloth back synthetic adhesive duct tape, PC 858CA, can to the testing conducted by the Lawrence Berkeley National Laboratory, in which cloth back rubber adhesive duct

  11. Density functional study of structure and bonding in lithium clusters Lin and their oxides LinO

    E-Print Network [OSTI]

    of the homonuclear and oxide clusters are quite distinct. The combination of DF calculations with molecular dynamics- and d-electrons e.g., P and Fe, respectively . The structural flex- ibility and the absence of a clear absorption data,7 these calculations have been used to study the structures of the most stable isomers of Li4

  12. Salmon-driven bed load transport and bed morphology in mountain Marwan A. Hassan,1

    E-Print Network [OSTI]

    [Statzner et al., 2000]. Although the effects of fish on sediment sorting of streambed gravels during and packing [Butler, 1995; Montgomery et al., 1996]. Specifically, the flexing action of female salmon creates and carried downstream. Coarser pebbles and gravels accumulate in a pile, called the tailspill

  13. Renewable Energy Journal 2004, vol. 29, pp. 369-376. page 1 of 6 EVALUATION OF THE COST EFFICIENCY OF AN

    E-Print Network [OSTI]

    Gieseler, Udo D. J.

    of Building Physics and Solar Energy Walter-Flex-Str. 3, D-57068 Siegen, Germany http://nesa1.uni costs of the investment into advanced sustainable building. INTRODUCTION For cold and moderate climates, which is a pre-requisite for the usage of renewable energy sources like solar radiation. Moreover

  14. Going Deep vs. Going Wide

    Broader source: Energy.gov [DOE]

    Going Deep vs. Going Wide, from the Residential Energy Efficiency Solutions Conference 2012. Provides an overview on the progress of four energy efficiency programs: Clean Energy Works Oregon, Efficiency Maine, Energy Upgrade California Flex Path, and EcoHouse Loan Program.

  15. IEEE TRANSACTIONS ON MECHATRONICS 1 Mechanical and Control-Oriented Design of a

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    IEEE TRANSACTIONS ON MECHATRONICS 1 Mechanical and Control-Oriented Design of a Monolithic be considered in the op- timization procedure to fit the open-loop frequency response of the synthesized. Then, a planar monolithic compliant micro-actuator has been synthesized using FlexIn and prototyped

  16. Trends in Automotive Communication Systems Nicolas Navet

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    is given. Next, the current eorts of the automotive industry on middleware technologies which mayTrends in Automotive Communication Systems Nicolas Navet 1 , Françoise Simonot-Lion 2 May 29, 2008 of a large number of automotive networks such as LIN, J1850, CAN, FlexRay, MOST, etc.. This chap- ter rst

  17. A Review of Embedded Automotive Protocols Nicolas Navet

    E-Print Network [OSTI]

    Navet, Nicolas

    is given. Next, the current eorts of the automotive industry on middleware technologies which mayA Review of Embedded Automotive Protocols Nicolas Navet 1 , Françoise Simonot-Lion 2 April 14, 2008 of a large number of automotive networks such as LIN, J1850, CAN, FlexRay, MOST, etc.. This pa- per rst

  18. WITTENBERG UNIVERSITY 2011-2012 NEW STUDENT HOUSING AND BOARD CONTRACT

    E-Print Network [OSTI]

    Bogaerts, Steven

    (please check desired meal plan): ( ) Carte Blanche Meal Plan (Unlimited dining in the CDR) and 100 Bonus Bonus Points: $1,954 per semester; TOTAL $3,908 Each bonus point is valued at one dollar ($1.00) and can and snacks plus 100 Bonus Points, or the 225 Flex Plan plus 100 Bonus Points, which is an average of 14 meals

  19. Texas Adapted Genetic Strategies for Beef Cattle VI: Creating Breeds 

    E-Print Network [OSTI]

    Hammack, Stephen P.

    2009-06-17T23:59:59.000Z

    and Maine-Anjou Corriente? ?pool of Criollo-type Mexican cattle Durham Reds? ?? to ? Shorthorn, remainder Red Angus Florida Cracker/Pineywoods? ?pool of Criollo-type Florida cattle Gelbray? ?5/8 Gelbvieh, 3/8 Brahman Lim? -Flex?? to ? Limousin...

  20. Passive Robotic Models of Propulsion by the Bodies and Caudal Fins of Fish

    E-Print Network [OSTI]

    Lauder, George V.

    SYMPOSIUM Passive Robotic Models of Propulsion by the Bodies and Caudal Fins of Fish George V, freely-swimming fishes. In this article, we discuss the use of simple robotic models of flexing fish/or pitch motion using a robotic flapping controller that allowed moving foils to swim at their self

  1. Prospects for plug-in hybrid electric vehicles in the United States and Japan: A general equilibrium analysis

    E-Print Network [OSTI]

    internal combustion engine (ICE) vehicles are flex-fuel, hydrogen fuel cell, and compressed natural gas Received in revised form 19 March 2010 Accepted 24 April 2010 Keywords: Alternative fuel vehicles Plug-powered vehicles. A representative vehicle tech- nology that runs on electricity in addition to conventional fuels

  2. Hydrogen Fuel Cell Problems 1) Explain why the hydrogen fuel cell vehicle is not as efficient as the reported "tank

    E-Print Network [OSTI]

    Bowen, James D.

    Hydrogen Fuel Cell Problems 1) Explain why the hydrogen fuel cell vehicle is not as efficient of ethanol? A flex-fuel SUV has a 25 gallon tank. Its sustainably-minded owner has decided to use E85 ethanol? 1 yr/person/450pounds of corn * 461 pounds of corn = 1.02 yrs #12;Electric Vehicle Problems 1

  3. North Carolina FY 2006-2007 Petroleum Displacement Program Report for the Joint Legislative Commission on Governmental Operations

    E-Print Network [OSTI]

    of alternative fueled and advanced technology vehicles with new vehicle purchases of electric vehicles, hybrid-electric vehicles, flex-fueled vehicles, and diesel vehicles that can use biodiesel. · Seven State agencies of technology that reduces the need to travel for every meeting, the combining of trips and tasks

  4. Alternate Fuel Vehicle Recommendations -New and Used Vehicles The University of Central Florida is now required to meet federal regulations

    E-Print Network [OSTI]

    Wu, Shin-Tson

    Alternate Fuel Vehicle Recommendations - New and Used Vehicles The University of Central Florida is now required to meet federal regulations concerning alternate fuel vehicle purchases is known as a flex fuel vehicle, or a vehicle that is capable of burning ethanol or regular unleaded

  5. Prototyping the R-Shell Real-Time Environment

    E-Print Network [OSTI]

    Oswal, Snehal M.

    1993-01-01T23:59:59.000Z

    an earlier kernel called GEM. It provides programmers with a view of the system as a set of interacting objects and they can use in- formation provided by these objects to modify scheduling to suit their needs. The Concord project [8] and the FLEX language...

  6. Ligand Binding to the Pregnane X Receptor by Geometric Matching of Hydrogen Bonds

    E-Print Network [OSTI]

    North Carolina at Chapel Hill, University of

    space. Hydrogen bonds have been used in FlexX [3] as part of a more complete energy function. Our conformations to PXR based on hydrogen bond geometry and use them as a starting point for ranking ligands aspect of the energy function, the hydrogen bonds, in order to identify the discriminating factor

  7. Vehicle Purchases In accordance with the Energy Policy Act of 2005 (EPAct 2005), Florida Atlantic University

    E-Print Network [OSTI]

    Fernandez, Eduardo

    Vehicle Purchases In accordance with the Energy Policy Act of 2005 (EPAct 2005), Florida Atlantic University has been mandated to purchase "E85" compliant flex-fuel vehicles. This is federally mandated campuses. Vehicles purchased for the university must comply with this mandate. E85 compliant vehicles

  8. Load responsive hydrodynamic bearing

    DOE Patents [OSTI]

    Kalsi, Manmohan S. (Houston, TX); Somogyi, Dezso (Sugar Land, TX); Dietle, Lannie L. (Stafford, TX)

    2002-01-01T23:59:59.000Z

    A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

  9. Enhanced optical microlithography with a FabryPerot-based spatial filtering technique

    E-Print Network [OSTI]

    multiple imaging CMI . CMI produces a series of images of the mask pattern, shifted in position along by means of CMI has been investigated by several authors. The super- FLEX focus latitude enhancement exposure method reported by Fukuda et al. 5 introduces a pupil-plane filter that creates two images

  10. Michael A. Santoro Title and Address: Contact Information

    E-Print Network [OSTI]

    Lin, Xiaodong

    of intellectual property, competitor information gathering, personal privacy law, and trade secrecy. ResearchMichael A. Santoro Title and Address: Contact Information: Professor Department of Management, Rutgers Flex Program MBA Program (2013) 2010 With Ronald J. Strauss, Best Paper in Ethics Award

  11. 2014-2015 Loan Notification Document (LND) STUDENT'S NAME

    E-Print Network [OSTI]

    Florida, University of

    2014-2015 Loan Notification Document (LND) 11. UFID # 12. STUDENT'S NAME (Last Name First) SFA USE Management of Donor-restricted UF Scholarships at http://www.sfa.ufl.edu/welcome/faculty-staff/scholarship-management-2015 Loan Notification Document (LND) 1. DEPARTMENT FLEX NUMBER: Ten-digit alpha-numeric account number

  12. U-060: Security update: Hotfix available for ColdFusion

    Broader source: Energy.gov [DOE]

    Vulnerabilities have been identified in ColdFusion 9.0.1 and earlier versions for Windows, Macintosh and UNIX. These vulnerabilities could lead to a cross-site scripting attack. Adobe categorizes this as an important update and recommends that users apply the latest update for their product installation.This update resolves a cross-site scripting vulnerability in cfform tag (CVE-2011-2463). This update resolves a cross-site scripting vulnerability in RDS (CVE-2011-4368).

  13. Detailed Analysis of the Thermal Mass Credits in a Code-Traceable DOE-2 Simulation of the 2001 IECC for a Single-Family Residence in Texas

    E-Print Network [OSTI]

    Kim, S.; Haberl, J.

    thermal performance. In another study Christian (1991) performed an analysis for the Council of American Building Officials? Model Energy Code Committee (CABO MEC) to develop exterior thermal mass credits (i.e., for heat capacity greater than... amounts of external wall mass, including wood-frame, masonry, adobe and wooden logs, and performed simulations of the test houses. He concluded that although the MEC thermal mass credit table may not be the most accurate values to be used for all...

  14. Canect: Matching You the Best-fit Translation Service

    E-Print Network [OSTI]

    Guo, Yujie

    2011-05-31T23:59:59.000Z

    information about the project: http://www.torry- ue.com/project/Thesis2011.htm. You will find the proposal file, research data, design materials and the html prototype for the system. I also attached the project presentation, scenario video, user experience... map and testing adobe swf files as supporting materials for the projects. CANECT: MATCHING YOU THE BEST-FIT TRANSLATION SERVICE 2 Design Research As the first part of the thesis, research was carried from three different directions...

  15. Extra Dimensions: 3D and Time in PDF Documentation

    SciTech Connect (OSTI)

    Graf, Norman A.; /SLAC

    2011-11-10T23:59:59.000Z

    High energy physics is replete with multi-dimensional information which is often poorly represented by the two dimensions of presentation slides and print media. Past efforts to disseminate such information to a wider audience have failed for a number of reasons, including a lack of standards which are easy to implement and have broad support. Adobe's Portable Document Format (PDF) has in recent years become the de facto standard for secure, dependable electronic information exchange. It has done so by creating an open format, providing support for multiple platforms and being reliable and extensible. By providing support for the ECMA standard Universal 3D (U3D) file format in its free Adobe Reader software, Adobe has made it easy to distribute and interact with 3D content. By providing support for scripting and animation, temporal data can also be easily distributed to a wide audience. In this talk, we present examples of HEP applications which take advantage of this functionality. We demonstrate how 3D detector elements can be documented, using either CAD drawings or other sources such as GEANT visualizations as input. Using this technique, higher dimensional data, such as LEGO plots or time-dependent information can be included in PDF files. In principle, a complete event display, with full interactivity, can be incorporated into a PDF file. This would allow the end user not only to customize the view and representation of the data, but to access the underlying data itself.

  16. Semi-flexible gas-insulated transmission line using electric field stress shields

    DOE Patents [OSTI]

    Cookson, A.H.; Dale, S.J.; Bolin, P.C.

    1982-12-28T23:59:59.000Z

    A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by use of main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. The flexing elements and the stress shields may also be utilized in connection with a plug and socket arrangement for providing electrical connection between main conductor sections. 10 figs.

  17. Quantifying non-axial deformations in rat myocardium

    E-Print Network [OSTI]

    Aghassibake, Kristina Diane

    2005-02-17T23:59:59.000Z

    comprise the sarcomere, the fundamental unit of contraction. The sarcomere 4 is bounded on both sides by the Z line, which is the structural backbone of the actin filaments (Opie, 2004). Fig. 1. Diagram of myofilament arrangement in striated muscle... shortens the sarcomere and is thought to be the fundamental mechanism of muscle contraction. Relaxation occurs when, in the presence of ATP, the myosin heads detach from the actin filaments and resume their un-flexed configuration (Opie, 2004). 6...

  18. Proceedings of the 5th ISES Europe Solar Conf., Freiburg (2004), vol. 2 591 Solar utilisation in low-energy buildings

    E-Print Network [OSTI]

    Gieseler, Udo D. J.

    and Solar Energy Walter-Flex-Str. 3, D-57068 Siegen, Germany http://nesa1.uni-siegen.de, e-mail: heidt@physik.uni-siegen.de Abstract For low-energy buildings, passive solar gains can contribute significantly to the heat bal- ance losses, the energy flux through the glazing of windows is denoted as "passive solar gains". In low-energy

  19. The Effects of Behavioral Training on Spinal Plasticity and ERK1/2 Phosphorylation, Within the Injured Spinal Cord

    E-Print Network [OSTI]

    Hughes, Abbey

    2009-06-09T23:59:59.000Z

    communication between the brain and spinal cord has been eliminated, rats can learn a simple instrumental response. If rats receive shock to one hindlimb when it is extended (controllable shock), subjects will learn to maintain that leg in a flexed position... to minimize shock exposure. Conversely, if shock is delivered irrespective of leg position (uncontrollable shock), subjects are unable to maintain the same response and exhibit a learning deficit when later tested with controllable shock. Recent studies...

  20. Metal spring stub and ceramic body electrode assembly

    DOE Patents [OSTI]

    Rolf, R.L.; Sharp, M.L.

    1984-06-26T23:59:59.000Z

    An electrode assembly is disclosed comprising an electrically conductive ceramic electrode body having an opening therein and a metal stub retained in the opening with at least a surface of the stub in intimate contact with a surface of the body and the stub adapted with a spring to flex and prevent damage to the body from expansion of the stub when subjected to a temperature differential. 1 fig.

  1. Airfoil seal system for gas turbine engine

    DOE Patents [OSTI]

    Diakunchak, Ihor S.

    2013-06-25T23:59:59.000Z

    A turbine airfoil seal system of a turbine engine having a seal base with a plurality of seal strips extending therefrom for sealing gaps between rotational airfoils and adjacent stationary components. The seal strips may overlap each other and may be generally aligned with each other. The seal strips may flex during operation to further reduce the gap between the rotational airfoils and adjacent stationary components.

  2. Promoting Energy Efficiency in Industry: Utility Roles and Perspectives

    E-Print Network [OSTI]

    Limaye, D. R.; Davis, T. D.

    1984-01-01T23:59:59.000Z

    successful utility marketing puget Sound Power and Light programs related to commercial/industrial end (Puget Power) -- The most flex use efficiency are: ible rebate program offered. Commercial/industrial customers ? Customer Education may submit... proposals and engineering designs for a rebate Pacific Gas and Electric Company up to $100,000. Utility (PG&E) -- Technical briefs of engineers also help with drawing new, emerging technologies. up bid specifications. Energy consumption monitoring...

  3. Design and optimization of a defect tolerant processor array

    E-Print Network [OSTI]

    Lakkapragada, Bhavani S

    1995-01-01T23:59:59.000Z

    (Parallel MIMD Architecture). . . . 3. Sequent Balance 4. FLEX/32 MultiComputer 5. Intel iPSC/2 6. CDC CYBERPLUS ( Ring Bus Architecture) B. Manufacturing . . III ARCHITECTURE A. Ring IV IMPLMENTATION OF THE DESIGN A. Implementation V TARGET... in this area. Chapter 3 is the description of the actual architecture being considered. Chapter 4 goes into the architectural optimization. Chapter 5 deals with the yield analysis and the use of partially good cells to improve the harvest. Chapter 6 gives...

  4. Fiber felts as low density structural materials

    SciTech Connect (OSTI)

    Milewski, J.V.; Newfield, S.E.

    1981-01-01T23:59:59.000Z

    Short fiber felts structures can be made which provide improvements in properties over foams. In applications where resistance to compression set or stress relaxation are important, bonded fiber felts excel due to the flexing of individual fibers within their elastic limit. Felts of stainless steel and polyester fibers were prepared by deposition from liquid slurries. Compressive properties were determined as a function of felt parent material, extent of bonding, felt density, and length-to-diameter (L/D) ratio of starting fibers.

  5. Blender Pump Fuel Survey: CRC Project E-95-2

    SciTech Connect (OSTI)

    Williams, A.; Alleman, T. L.

    2014-05-01T23:59:59.000Z

    With the increasing fuel diversity in the marketplace, the Coordinating Research Council and the U.S. Department of Energy's National Renewable Energy Laboratory conducted a survey of mid-level ethanol blends (MLEBs) in the market. A total of 73 fuel samples were collected from 20 retail stations. To target Class 4 volatility, the fuel samples were collected primarily in the midwestern United States in the month of February. Samples included the gasoline (E0), Flex Fuel, and every MLEB that was offered from each of the 20 stations. Photographs of each station were taken at the time of sample collection, detailing the pump labeling and configuration. The style and labeling of the pump, hose, and dispenser nozzle are all important features to prevent misfueling events. The physical location of the MLEB product relative to the gasoline product can also be important to prevent misfueling. In general, there were many differences in the style and labeling of the blender pumps surveyed in this study. All samples were analyzed for volatility and ethanol content. For the MLEB samples collected, the fuels tended to be lower in ethanol content than their indicated amount; however, the samples were all within 10 vol% of their indicated blend level. One of the 20 Flex Fuel samples was outside of the allowable limits for ethanol content. Four of the 20 Flex Fuel samples had volatility below the minimum requirement for Class 4.

  6. Method to improve superconductor cable

    DOE Patents [OSTI]

    Borden, A.R.

    1984-03-08T23:59:59.000Z

    A method is disclosed of making a stranded superconductor cable having improved flexing and bending characteristics. In such method, a plurality of superconductor strands are helically wound around a cylindrical portion of a mandrel which tapers along a transitional portion to a flat end portion. The helically wound strands form a multistrand hollow cable which is partially flattened by pressure rollers as the cable travels along the transitional portion. The partially flattened cable is impacted with repeated hammer blows as the hollow cable travels along the flat end portion. The hammer blows flatten both the internal and the external surfaces of the strands. The cable is fully flattened and compacted by two sets of pressure rollers which engage the flat sides and the edges of the cable after it has traveled away from the flat end portion of the mandrel. The flattened internal surfaces slide easily over one another when the cable is flexed or bent so that there is very little possibility that the cable will be damaged by the necessary flexing and bending required to wind the cable into magnet coils.

  7. Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Faulds, James E.

    Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross?sections in Adobe Illustrator format. Comprehensive catalogue of drill?hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross?sections, drill?hole data, and geophysics.

  8. Second Line of Defense: Electronic Maintenance Reports, Local Maintenance Provider User Guide, Rev. 3

    SciTech Connect (OSTI)

    Leigh, Richard J.

    2012-09-01T23:59:59.000Z

    The Electronic Maintenance Report forms allow Local Maintenance Providers (LMP) and other program staff to enter maintenance information into a simple and secure system. This document describes the features and information required to complete the Maintenance Report forms. It is expected that all Corrective Maintenance Reports from LMPs will be submitted electronically into the SLD Portal. As an exception (e.g., when access to the SLD Portal is unavailable), Maintenance Reports can be submitted via a secure Adobe PDF form available through the Sustainability Manager assigned to each country.

  9. Geologic Map and Cross Sections of the McGinness Hills Geothermal Area - GIS Data

    SciTech Connect (OSTI)

    Faulds, James E.

    2013-12-31T23:59:59.000Z

    Geologic map data in shapefile format that includes faults, unit contacts, unit polygons, attitudes of strata and faults, and surficial geothermal features. 5 cross?sections in Adobe Illustrator format. Comprehensive catalogue of drill?hole data in spreadsheet, shapefile, and Geosoft database formats. Includes XYZ locations of well heads, year drilled, type of well, operator, total depths, well path data (deviations), lithology logs, and temperature data. 3D model constructed with EarthVision using geologic map data, cross?sections, drill?hole data, and geophysics.

  10. Energy Efficient Rondavels in the Kruger National Game Reserve, South Africa

    E-Print Network [OSTI]

    Holm, D.

    2000-01-01T23:59:59.000Z

    Five is an unforgettable experience. Part of this is the climate and the unusual architecture of rondavels. These traditional buildings were originally windowless round huts with low mud walls (adobe or wattle- and- daub) topped by conical thatched... derived from the Latin root "round" and is an apt description of the traditional climate-adapted 3,600 to 6,000mm diameter hut consisting of a circular 1,200 to 1,500mm high mud construction wall supporting a conical grass thatched roof. This geometry...

  11. T-629: Avaya WinPDM Multiple Buffer Overflow Vulnerabilities | Department

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014,Zaleski -BlueprintThisVulnerabilities | DepartmentDepartment|Adobe

  12. Annual NEPA Planning Summary Report Template | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy:Whether you're a16-17,2-13) AllDepartmentof Energy In 2013,Adobe

  13. U-149: Apache OFBiz Cross-Site Scripting and Code Execution Vulnerabilities

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY6: Adobe| Department

  14. U-154: IBM Rational ClearQuest ActiveX Control Buffer Overflow

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY6: Adobe|

  15. U-162: Drupal Multiple Vulnerabilities | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY6: Adobe|2: Drupal

  16. U-165: Apple iOS Bugs Let Remote Users Execute Arbitrary Code and Spoof

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently AskedEnergyIssuesEnergyTransportation WorkDecemberInjury at FY6: Adobe|2:

  17. Policy Flashes | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently20,000 RussianBy: ThomasDepartment ofThis week on2011-614-26 (pdf) -8-67Adobe1.

  18. Get your cute baby animal fix | The Ames Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe ReaderGet your

  19. Getting Energized

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe ReaderGet your

  20. Getting Energized!

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe ReaderGet

  1. Getting Inside Plants | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or Adobe

  2. Getting Inside Plants | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or AdobeGetting Inside

  3. Getting Started

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOEThe Bonneville Power AdministrationField8,Dist.NewofGeothermal Heat Pump Basics Acrobat X or AdobeGettingGetting

  4. Fuel Economy and Emissions of a Vehicle Equipped with an Aftermarket Flexible-Fuel Conversion Kit

    SciTech Connect (OSTI)

    Thomas, John F [ORNL; Huff, Shean P [ORNL; West, Brian H [ORNL

    2012-04-01T23:59:59.000Z

    The U.S. Environmental Protection Agency (EPA) grants Certificates of Conformity for alternative fuel conversion systems and also offers other forms of premarket registration of conversion kits for use in vehicles more than two model years old. Use of alternative fuels such as ethanol, natural gas, and propane are encouraged by the Energy Policy Act of 1992. Several original equipment manufacturers (OEMs) produce emissions-certified vehicles capable of using alternative fuels, and several alternative fuel conversion system manufacturers produce EPA-approved conversion systems for a variety of alternative fuels and vehicle types. To date, only one manufacturer (Flex Fuel U.S.) has received EPA certifications for ethanol fuel (E85) conversion kits. This report details an independent evaluation of a vehicle with a legal installation of a Flex Fuel U.S. conversion kit. A 2006 Dodge Charger was baseline tested with ethanol-free certification gasoline (E0) and E20 (gasoline with 20 vol % ethanol), converted to flex-fuel operation via installation of a Flex Box Smart Kit from Flex Fuel U.S., and retested with E0, E20, E50, and E81. Test cycles included the Federal Test Procedure (FTP or city cycle), the highway fuel economy test (HFET), and the US06 test (aggressive driving test). Averaged test results show that the vehicle was emissions compliant on E0 in the OEM condition (before conversion) and compliant on all test fuels after conversion. Average nitrogen oxide (NOx) emissions exceeded the Tier 2/Bin 5 intermediate life NO{sub X} standard with E20 fuel in the OEM condition due to two of three test results exceeding this standard [note that E20 is not a legal fuel for non-flexible-fuel vehicles (non-FFVs)]. In addition, one E0 test result before conversion and one E20 test result after conversion exceeded the NOX standard, although the average result in these two cases was below the standard. Emissions of ethanol and acetaldehyde increased with increasing ethanol, while nonmethane organic gas and CO emissions remained relatively unchanged for all fuels and cycles. Higher fraction ethanol blends appeared to decrease NO{sub X} emissions on the FTP and HFET (after conversion). As expected, fuel economy (miles per gallon) decreased with increasing ethanol content in all cases.

  5. Comparative costs of flexible package cells and rigid cells for lithium-ionhybrid electric vehicle batteries.

    SciTech Connect (OSTI)

    Nelson, P. A.; Jansen, A. N.

    2006-11-28T23:59:59.000Z

    We conducted a design study to compare the manufacturing costs at a level of 100,000 hybrid vehicle batteries per year for flexible package (Flex) cells and for rigid aluminum container (Rigid) cells. Initially, the Rigid cells were considered to have welded closures and to be deep-drawn containers of about the same shape as the Flex cells. As the study progressed, the method of fabricating and sealing the Rigid cells was expanded to include lower cost options including double seaming and other mechanically fastened closures with polymer sealants. Both types of batteries were designed with positive electrodes containing Li(Ni{sub 1/3}Co{sub 1/3}Mn{sub 1/3})O{sub 2} and graphite negative electrodes. The use of a different combination of lithium-ion electrodes would have little effect on the difference in costs for the two types of cells. We found that 20-Ah cells could be designed with excellent performance and heat rejection capabilities for either type of cell. Many parts in the design of the Flex cells are identical or nearly identical to those of the Rigid Cell, so for these features there would be no difference in the cost of manufacturing the two types of batteries. We judged the performance, size and weight of the batteries to be sufficiently similar that the batteries would have the same value for their application. Some of the design features of the Flex cells were markedly different than those of the deep-drawn and welded Rigid cells and would result in significant cost savings. Fabrication and processing steps for which the Flex cells appear to have a cost advantage over these Rigid cells are (1) container fabrication and sealing, (2) terminal fabrication and sealing, and (3) intercell connections. The costs of providing cooling channels adjacent to the cells and for module and battery hardware appear to favor Rigid cell batteries slightly. Overall, Flex cell batteries appear to have an advantage of about $1.20-$3.70 per cell for a 25-kW Battery of 20 cells or about $24 to $74 per battery. Container experts assisted with this study, including a paid consultant and personnel at container manufacturing companies. Some of the companies are considering entering the business of manufacturing containers for hybrid vehicle battery manufacturers. For this reason they provided valuable guidance on overall approaches to reducing the costs of the cell containers. They have retained the description of some specific designs and procedures for future possible work with battery manufacturers, with whom they are now in contact. Through the guidance of these experts, we determined that a new type of container could be manufactured that would have the best features of performance and low cost of both the Rigid and Flex containers. For instance, the aluminum layer in a tri-layer sheet can be sufficiently thick to form a rigid container that can be fabricated in two halves, much like a Flex container, and mechanically joined at the edges for strength. In addition to the mechanical joint, this container can be sealed at the edges, much like a Flex container, by means of an inner polymer liner that can be heat-sealed or ultrasonically welded. The terminals can be flat strips of metal sealed into the top of the container as part of the edge sealing of the container, as for the Flex cell. Ridges can be stamped into one side of the container to provide cooling channels and the exterior layer of the container stock can be coated with a thin, electrically insulating, polymer layer. We expect this type of container will provide excellent sealing and durability and be less expensive than either the Flex or the Rigid container, which the study initially considered. A major cost for the original Rigid container is the welding required for sealing the container. However, the welding of the current collector tabs to the terminal piece may be even more complex and costly than welding the container. It is important, therefore, to develop an inexpensive procedure for attachment of the foils to the terminal pieces. A lower-cost procedure, such as

  6. Dusky dolphins of Kaikoura, New Zealand: behavioral effects of genetic sampling and analysis of population structure

    E-Print Network [OSTI]

    Harlin, April Dawn

    1999-01-01T23:59:59.000Z

    prolonged "slicing" behavior, indicating a flight response to sampling. Tail isla ? -Dolphin flexed its caudal region and brought it forcefully down on the water, making a large splash and loud slap. This behavior is thought to be an indicator... Table 1. Summary of behavioral responses of dusky dolphins to sampling. Responses Treatment (a=315) Control (n=48) Move Right/Left 47'io 29'/o Dive 12ao 17'/o Increase Speed 21'/o 8o/ Tail Slap Startle (I'/o 2o/o 0'so 0so No Response 18'to 46...

  7. EDDY CURRENT SYSTEM FOR DETECTION OF CRACKING BENEATH BRAIDING IN CORRUGATED METAL HOSE

    SciTech Connect (OSTI)

    Wincheski, Buzz [NASA Langley Research Center, Hampton, VA 23681 (United States); Simpson, John [Lockheed Martin Space Operations, Hampton, VA 23681 (United States); Hall, George [George Washington University, Washington, D.C. 20052 (United States)

    2009-03-03T23:59:59.000Z

    In this paper an eddy current system for the detection of partially-through-the-thickness cracks in corrugated metal hose is presented. Design criteria based upon the geometry and conductivity of the part are developed and applied to the fabrication of a prototype inspection system. Experimental data are used to highlight the capabilities of the system and an image processing technique is presented to improve flaw detection capabilities. A case study for detection of cracking damage in a space shuttle radiator retract flex hoses is also presented.

  8. A new Silurian xiphosuran from Podolia, Ukraine, USSR

    E-Print Network [OSTI]

    Selden, Paul A.; Drygant, Daniel M.

    1987-01-01T23:59:59.000Z

    single piece: the cast a n d internal mould of the whole carapace and slightly damaged opis thosoma of nine tergites. Since the animal is n o t flexed dorsally, the half- ring belonging to the first opis thosomal somite cannot be seen and is presumed.... Carapace spatulate , nearly as long as opis thosoma (excluding telson); cardiac and oph­ thalmic morphology obscure; genal cornua b road a n d rounded, lacking anter ior median projection. S E L D E N A N D D R Y G A N T : S I L U R I A N X I P H O S U R A...

  9. Solid Phase Characterization of Tank 241-AY-102 Annulus Space Particulate

    SciTech Connect (OSTI)

    Cooke, G. A.

    2013-01-30T23:59:59.000Z

    The Special Analytical Studies Group at the 222-S Laboratory (222-S) examined the particulate recovered from a series of samples from the annular space of tank 241-AY-102 (AY-102) using solid phase characterization (SPC) methods. These include scanning electron microscopy (SEM) using the ASPEX?1 scanning electron microscope, X-ray diffraction (XRD) using the Rigaku?2 MiniFlex X-ray diffractometer, and polarized light microscopy (PLM) using the Nikon?3 Eclipse Pol optical microscope. The SEM is equipped with an energy dispersive X-ray spectrometer (EDS) to provide chemical information.

  10. Galactic Discourse Issue 5

    E-Print Network [OSTI]

    Multiple Contributors

    1987-01-01T23:59:59.000Z

    hand isn't too steady right now. The scars I'd leave would look like my signature on a prescr iption pad." Spock flexed the injured fingers. "Isn't that better?" McCoy asked. "Yes, it is," Spock conceded. "Which has been my point all along... the captain. "All right, Scotty," Kirk said quickly into his communicator. "Beam us up, and now isn't soon 10 enough." They disappeared from the planet that would soon no longer be there to remember them. * * " McCoy lay on his stomach, hoping...

  11. Optical fiber pressure and acceleration sensor fabricated on a fiber endface

    DOE Patents [OSTI]

    Zhu, Yizheng; Wang, Xingwei; Xu, Juncheng; Wang, Anbo

    2006-05-30T23:59:59.000Z

    A fiber optic sensor has a hollow tube bonded to the endface of an optical fiber, and a diaphragm bonded to the hollow tube. The fiber endface and diaphragm comprise an etalon cavity. The length of the etalon cavity changes when applied pressure or acceleration flexes the diaphragm. The entire structure can be made of fused silica. The fiber, tube, and diaphragm can be bonded with a fusion splice. The present sensor is particularly well suited for measuring pressure or acceleration in high temperature, high pressure and corrosive environments (e.g., oil well downholes and jet engines). The present sensors are also suitable for use in biological and medical applications.

  12. Multiwire conductor having greatly increased interwire resistance and method for making same

    DOE Patents [OSTI]

    Luhman, T.; Suenaga, M.

    1982-03-15T23:59:59.000Z

    An improved multiwire conductor of the type which is mechanically stabilized by a tin based solder filler is described. A solder filled conductor is heated to a temperature above its melting point for a period long enough to allow a substantial amount of copper to be dissolved from the wires comprising the conductor. The copper forms the brittle intermetallic compound Cu/sub 5/Sn/sub 6/ with tin in the solder. After cooling the conductor is flexed causing a random cracking of the solder, and thereby increasing the interwire resistance of the conductor. The subject invention is particularly adapted for use with braided, ribbon-type solder filled superconductors.

  13. Development of Readout Interconnections for the Si-W Calorimeter of SiD

    SciTech Connect (OSTI)

    Woods, M.; Fields, R.G.; Holbrook, B.; Lander, R.L.; Moskaleva, A.; Neher, C.; Pasner, J.; Tripathi, M.; /UC, Davis; Brau, J.E.; Frey, R.E.; Strom, D.; /Oregon U.; Breidenbach, M.; Freytag, D.; Haller, G.; Herbst, R.; Nelson, T.; /SLAC; Schier, S.; Schumm, B.; /UC, Santa Cruz

    2012-09-14T23:59:59.000Z

    The SiD collaboration is developing a Si-W sampling electromagnetic calorimeter, with anticipated application for the International Linear Collider. Assembling the modules for such a detector will involve special bonding technologies for the interconnections, especially for attaching a silicon detector wafer to a flex cable readout bus. We review the interconnect technologies involved, including oxidation removal processes, pad surface preparation, solder ball selection and placement, and bond quality assurance. Our results show that solder ball bonding is a promising technique for the Si-W ECAL, and unresolved issues are being addressed.

  14. Stretchable and foldable electronic devices

    DOE Patents [OSTI]

    2013-10-08T23:59:59.000Z

    Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

  15. Internal pipe attachment mechanism

    DOE Patents [OSTI]

    Bast, R.M.; Chesnut, D.A.; Henning, C.D.; Lennon, J.P.; Pastrnak, J.W.; Smith, J.A.

    1994-12-13T23:59:59.000Z

    An attachment mechanism is described for repairing or extending fluid carrying pipes, casings, conduits, etc. utilizing one-way motion of spring tempered fingers to provide a mechanical connection between the attachment mechanism and the pipe. The spring tempered fingers flex to permit insertion into a pipe to a desired insertion depth. The mechanical connection is accomplished by reversing the insertion motion and the mechanical leverage in the fingers forces them outwardly against the inner wall of the pipe. A seal is generated by crushing a sealing assembly by the action of setting the mechanical connection. 6 figures.

  16. Turbine blade tip gap reduction system

    DOE Patents [OSTI]

    Diakunchak, Ihor S.

    2012-09-11T23:59:59.000Z

    A turbine blade sealing system for reducing a gap between a tip of a turbine blade and a stationary shroud of a turbine engine. The sealing system includes a plurality of flexible seal strips extending from a pressure side of a turbine blade generally orthogonal to the turbine blade. During operation of the turbine engine, the flexible seal strips flex radially outward extending towards the stationary shroud of the turbine engine, thereby reducing the leakage of air past the turbine blades and increasing the efficiency of the turbine engine.

  17. A rationale for teaching literature-compositon courses

    E-Print Network [OSTI]

    Ratchford, Suzanne Marie

    1988-01-01T23:59:59.000Z

    ; it is what prevents the de+inition from becoming too unwieldy. Literature is used as a basis +or classroom study. It serves an educational pur pose. Some may disagree ? does this mean r eading The I 1 iad at home for pleasure makes the w'ork not a work... with time. Third, a new model for teaching English must be -Flex i ble, f 1 ex i ble enough to al low parti ci pants to incorporate their individual teaching and learning styles. 4s a teacher, I hesitate to accept a model +or classroom use that does...

  18. Stretchable and foldable electronic devices

    DOE Patents [OSTI]

    Rogers, John A; Huang, Yonggang; Ko, Heung Cho; Stoykovich, Mark; Choi, Won Mook; Song, Jizhou; Ahn, Jong Hyun; Kim, Dae Hyeong

    2014-12-09T23:59:59.000Z

    Disclosed herein are stretchable, foldable and optionally printable, processes for making devices and devices such as semiconductors, electronic circuits and components thereof that are capable of providing good performance when stretched, compressed, flexed or otherwise deformed. Strain isolation layers provide good strain isolation to functional device layers. Multilayer devices are constructed to position a neutral mechanical surface coincident or proximate to a functional layer having a material that is susceptible to strain-induced failure. Neutral mechanical surfaces are positioned by one or more layers having a property that is spatially inhomogeneous, such as by patterning any of the layers of the multilayer device.

  19. Method of protecting surfaces from abrasion and abrasion resistant articles of manufacture

    DOE Patents [OSTI]

    Hirschfeld, T.B.

    1988-06-09T23:59:59.000Z

    Surfaces of fabricated structures are protected from damage by impacting particulates by a coating of hard material formed as a mass of thin flexible filaments having root ends secured to the surface and free portions which can flex and overlap to form a resilient cushioning mat which resembles hair or fur. The filamentary coating covers the underlying surface with hard abrasion resistance material while also being compliant and capable of local accommodation to particle impacts. The coating can also function as thermal and/or acoustical insulation and has a friction reducing effect. 11 figs.

  20. Flint Electric Membership Corp | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex Fuels Energy

  1. Flint Geothermal Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex Fuels EnergyFlint

  2. Flint Hills Rural E C A, Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex Fuels

  3. FloDesign Wind Turbine Corporation | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex FuelsFloDesign Wind

  4. Floating Power Plant A S FPP | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex FuelsFloDesign

  5. Flora | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex FuelsFloDesignFlora

  6. Florence Utility Comm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlex

  7. Florence, Colorado: Energy Resources | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlexColorado: Energy

  8. Florida Keys El Coop Assn, Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlexColorado:

  9. Florida Power & Light Co. | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A PotentialJumpGermanFife Energy Park atFisia BabcockFlexColorado:Florida

  10. DOE-Funded Research at Stanford Sees Results in Reservoir Characterization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex Bulletin The|

  11. DOE-Funded Researchers Honored by R&D Magazine | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex Bulletin

  12. DOE-HDBK-1001-96; Guide to Good Practices for Training and Qualification of Instructors

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex Bulletin1-96

  13. DOE-HDBK-1002-96; Guide to Good Practices for Training and Qualification of Chemical Operators

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex

  14. DOE-HDBK-1003-96; Guide to Good Practices for Training and Qualification of Maintenance Personnel

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-96 March

  15. DOE-HDBK-1010-92; Doe Fundamentals Handbook Classical Physics

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-96 March0-92

  16. DOE-HDBK-1011/1-92; DOE Fundamentals Handbook Electrical Science Volume 1 of 4

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-96

  17. DOE-HDBK-1011/2-92 | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-962-92

  18. DOE-HDBK-1011/2-92; DOE Fundamentals Handbook Electrical Science Volume 2 of 4

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:Revised Finding of No Significant Impact for Biomass CogenerationFlex3-962-922-92

  19. Utility Grant Program | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and toolsoperation plansUtiliFlex Jump

  20. Utility Rate Database | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and toolsoperation plansUtiliFlex Jumpsource

  1. Utility Rate Discount | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and toolsoperation plansUtiliFlex

  2. Utility Rate Discounts | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga,planning methodologies and toolsoperation plansUtiliFlexDiscounts

  3. Deep PDF parsing to extract features for detecting embedded malware.

    SciTech Connect (OSTI)

    Munson, Miles Arthur; Cross, Jesse S. (Missouri University of Science and Technology, Rolla, MO)

    2011-09-01T23:59:59.000Z

    The number of PDF files with embedded malicious code has risen significantly in the past few years. This is due to the portability of the file format, the ways Adobe Reader recovers from corrupt PDF files, the addition of many multimedia and scripting extensions to the file format, and many format properties the malware author may use to disguise the presence of malware. Current research focuses on executable, MS Office, and HTML formats. In this paper, several features and properties of PDF Files are identified. Features are extracted using an instrumented open source PDF viewer. The feature descriptions of benign and malicious PDFs can be used to construct a machine learning model for detecting possible malware in future PDF files. The detection rate of PDF malware by current antivirus software is very low. A PDF file is easy to edit and manipulate because it is a text format, providing a low barrier to malware authors. Analyzing PDF files for malware is nonetheless difficult because of (a) the complexity of the formatting language, (b) the parsing idiosyncrasies in Adobe Reader, and (c) undocumented correction techniques employed in Adobe Reader. In May 2011, Esparza demonstrated that PDF malware could be hidden from 42 of 43 antivirus packages by combining multiple obfuscation techniques [4]. One reason current antivirus software fails is the ease of varying byte sequences in PDF malware, thereby rendering conventional signature-based virus detection useless. The compression and encryption functions produce sequences of bytes that are each functions of multiple input bytes. As a result, padding the malware payload with some whitespace before compression/encryption can change many of the bytes in the final payload. In this study we analyzed a corpus of 2591 benign and 87 malicious PDF files. While this corpus is admittedly small, it allowed us to test a system for collecting indicators of embedded PDF malware. We will call these indicators features throughout the rest of this report. The features are extracted using an instrumented PDF viewer, and are the inputs to a prediction model that scores the likelihood of a PDF file containing malware. The prediction model is constructed from a sample of labeled data by a machine learning algorithm (specifically, decision tree ensemble learning). Preliminary experiments show that the model is able to detect half of the PDF malware in the corpus with zero false alarms. We conclude the report with suggestions for extending this work to detect a greater variety of PDF malware.

  4. Joint with application in electrochemical devices

    DOE Patents [OSTI]

    Weil, K Scott [Richland, WA; Hardy, John S [Richland, WA

    2010-09-14T23:59:59.000Z

    A joint for use in electrochemical devices, such as solid oxide fuel cells (SOFCs), oxygen separators, and hydrogen separators, that will maintain a hermetic seal at operating temperatures of greater than 600.degree. C., despite repeated thermal cycling excess of 600.degree. C. in a hostile operating environment where one side of the joint is continuously exposed to an oxidizing atmosphere and the other side is continuously exposed to a wet reducing gas. The joint is formed of a metal part, a ceramic part, and a flexible gasket. The flexible gasket is metal, but is thinner and more flexible than the metal part. As the joint is heated and cooled, the flexible gasket is configured to flex in response to changes in the relative size of the metal part and the ceramic part brought about by differences in the coefficient of thermal expansion of the metal part and the ceramic part, such that substantially all of the tension created by the differences in the expansion and contraction of the ceramic and metal parts is absorbed and dissipated by flexing the flexible gasket.

  5. Harsh-Environment Packaging for Downhole Gas and Oil Exploration

    SciTech Connect (OSTI)

    Shubhra Bansal; Junghyun Cho; Kevin Durocher; Chris Kapusta; Aaron Knobloch; David Shaddock; Harry Schoeller; Hua Xia

    2007-08-31T23:59:59.000Z

    This research into new packaging materials and methods for elevated temperatures and harsh environment electronics focused on gaining a basic understanding of current state-of-the-art in electronics packaging used in industry today, formulating the thermal-mechanical models of the material interactions and developing test structures to confirm these models. Discussions were initiated with the major General Electric (GE) businesses that currently sell into markets requiring high temperature electronics and packaging. They related the major modes of failure they encounter routinely and the hurdles needed to be overcome in order to improve the temperature specifications of these products. We consulted with our GE business partners about the reliability specifications and investigated specifications and guidelines that from IPC and the SAE body that is currently developing guidelines for electronics package reliability. Following this, a risk analysis was conducted for the program to identify the critical risks which need to be mitigated in order to demonstrate a flex-based packaging approach under these conditions. This process identified metal/polyimide adhesion, via reliability for flex substrates and high temperature interconnect as important technical areas for reliability improvement.

  6. Vibration dampener for dampening vibration of a tubular member

    DOE Patents [OSTI]

    Obermeyer, F.D.; Middlebrooks, W.B.; DeMario, E.E.

    1994-10-18T23:59:59.000Z

    Vibration dampener for dampening vibration of a tubular member, such as an instrumentation tube of the type found in nuclear reactor pressure vessels is disclosed. The instrumentation tube is received in an outer tubular member, such as a guide thimble tube. The vibration dampener comprises an annular sleeve which is attachable to the inside surface of the guide thimble tube and which is sized to surround the instrumentation tube. Dimples are attached to the interior wall of the sleeve for radially supporting the instrumentation tube. The wall of the sleeve has a flexible spring member, which is formed from the wall, disposed opposite the dimples for biasing the instrumentation tube into abutment with the dimples. Flow-induced vibration of the instrumentation tube will cause it to move out of contact with the dimples and further engage the spring member, which will flex a predetermined amount and exert a reactive force against the instrumentation tube to restrain its movement. The amount by which the spring member will flex is less than the unrestrained amplitude of vibration of the instrumentation tube. The reactive force exerted against the instrumentation tube will be sufficient to return it to its original axial position within the thimble tube. In this manner, vibration of the instrumentation tube is dampened so that in-core physics measurements are accurate and so that the instrumentation tube will not wear against the inside surface of the guide thimble tube. 14 figs.

  7. Incorporating Urban Systems in Global Climate Models: The Role of GIScience

    E-Print Network [OSTI]

    Feddema, Johannes J.

    2006-11-15T23:59:59.000Z

    0.92 brick 0.7 1360.0 0.3 1700 800 0.9 mud 1.0 1456.0 0.3 1820 800 0.9 wood 0.1 1127.5 0.5 550 2050 0.87 glass 0.9 2100.0 0.08 2500 840 0.91 stone 2.6 2310.0 0.275 2750 840 0.92 adobe 1.0 1456.0 0.3 1820 800 0.91 rubble 0.8 950 0.275 1900 500 0..., Cooperative Agreement No. DE-FC02- 97ER62402, by the National Science Foundation grant numbers ATM-0107404, and ATM-0413540, the NCAR Weather and Climate Impact Assessment Science Initiative, and the University of Kansas, Center for Research. Motivation...

  8. Semi-flexible gas-insulated transmission line using protection tube in conductor plug-in joint

    DOE Patents [OSTI]

    Kommineni, P.R.

    1983-01-25T23:59:59.000Z

    A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. A plug and socket arrangement is utilized for joining adjacent sections of the inner conductor, and a protection tube is utilized inside the hollow plug to maintain proper alignment of the joint when the transmission line is bent. 3 figs.

  9. Solid Phase Characterization of Tank 241-C-108 Residual Waste Solids Samples

    SciTech Connect (OSTI)

    Cooke, Gary A.; Pestovich, John A.; Huber, Heinz J.

    2013-05-29T23:59:59.000Z

    This report presents the results for solid phase characterization (SPC) of solid samples removed from tank 241-C-108 (C-108) on August 12-13,2012, using the off-riser sampler. Samples were received at the 222-S Laboratory on August 13 and were described and photographed. The SPC analyses that were performed include scanning electron microscopy (SEM) using the ASPEX(R)l scanning electron microscope, X-ray diffraction (XRD) using the Rigaku(R) 2 MiniFlex X-ray diffractometer, and polarized light microscopy (PLM) using the Nikon(R) 3 Eclipse Pol optical microscope. The SEM is equipped with an energy dispersive X-ray spectrometer (EDS) to provide chemical information. Gary A. Cooke conducted the SEM analysis, John A. Pestovich performed the XRD analysis, and Dr. Heinz J. Huber performed the PLM examination. The results of these analyses are presented here.

  10. Hyper heuristic based on great deluge and its variants for exam timetabling problem

    E-Print Network [OSTI]

    Sin, Ei Shwe

    2012-01-01T23:59:59.000Z

    Today, University Timetabling problems are occurred annually and they are often hard and time consuming to solve. This paper describes Hyper Heuristics (HH) method based on Great Deluge (GD) and its variants for solving large, highly constrained timetabling problems from different domains. Generally, in hyper heuristic framework, there are two main stages: heuristic selection and move acceptance. This paper emphasizes on the latter stage to develop Hyper Heuristic (HH) framework. The main contribution of this paper is that Great Deluge (GD) and its variants: Flex Deluge(FD), Non-linear(NLGD), Extended Great Deluge(EGD) are used as move acceptance method in HH by combining Reinforcement learning (RL).These HH methods are tested on exam benchmark timetabling problem and best results and comparison analysis are reported.

  11. Materials for Stretchable Electronics - Electronic Eyeballs, Brain Monitors and Other Applications

    ScienceCinema (OSTI)

    John A. Rogers

    2010-01-08T23:59:59.000Z

    Electronic circuits that involve transistors and related components on thin plastic sheets or rubber slabs offer mechanical properties (e.g. bendability, stretchability) and other features (e.g. lightweight, rugged construction) which cannot be easily achieved with technologies that use rigid, fragile semiconductor wafer or glass substrates.  Device examples include personal or structural health monitors and electronic eye imagers, in which the electronics must conform to complex curvilinear shapes or flex/stretch during use.  Our recent work accomplishes these technology outcomes by use of single crystal inorganic nanomaterials in ?wavy? buckled configurations on elastomeric supports.  This talk will describe key fundamental materials and mechanics aspects of these approaches, as well as engineering features of their use in individual transistors, photodiodes and integrated circuits.  Cardiac and brain monitoring devices provide examples of application in biomedicine; hemispherical electronic eye cameras illustrate new capacities for bio-inspired device design.

  12. Gas turbine nozzle vane insert and methods of installation

    DOE Patents [OSTI]

    Miller, William John (Simpsonville, SC); Predmore, Daniel Ross (Clifton Park, NY); Placko, James Michael (West Chester, OH)

    2002-01-01T23:59:59.000Z

    A pair of hollow elongated insert bodies are disposed in one or more of the nozzle vane cavities of a nozzle stage of a gas turbine. Each insert body has an outer wall portion with apertures for impingement-cooling of nozzle wall portions in registration with the outer wall portion. The insert bodies are installed into the cavity separately and spreaders flex the bodies toward and to engage standoffs against wall portions of the nozzle whereby the designed impingement gap between the outer wall portions of the insert bodies and the nozzle wall portions is achieved. The spreaders are secured to the inner wall portions of the insert bodies and the bodies are secured to one another and to the nozzle vane by welding or brazing.

  13. Preliminary Verification and Validation of WEC-Sim, an Open-Source Wave Energy Converter Design Tool: Preprint

    SciTech Connect (OSTI)

    Ruehl, K.; Michelen, C.; Kanner, S.; Lawson, M.; Yu, Y. H.

    2014-03-01T23:59:59.000Z

    To promote and support the wave energy industry, a wave energy converter (WEC) design tool, WEC-Sim, is being developed by Sandia National Laboratories and the National Renewable Energy Laboratory. In this paper, the WEC-Sim code is used to model a point absorber WEC designed by the U.S. Department of Energy's reference model project. Preliminary verification was performed by comparing results of the WEC-Sim simulation through a code-to-code comparison, utilizing the commercial codes ANSYS-AQWA, WaveDyn, and OrcaFlex. A preliminary validation of the code was also performed by comparing WEC-Sim simulation results to experimental wave tank tests.

  14. ULTRA BARRIER TOPSHEET (UBT) FOR FLEXIBLE PHOTOVOLTAICS

    SciTech Connect (OSTI)

    Schubert, Charlene

    2013-01-09T23:59:59.000Z

    This slideshow presents work intended to: Scale-up the Generation -1 UBT to 1+meter width full-scale manufacturing; Develop a Generation-2 UBT on the pilot line, targeting improved performance, longer lifetime and lower cost; Transfer Generation-2 UBT from the pilot line to the full-scale manufacturing line in 2014; and Validate service life of Generation-1 UBT for the 25+ year lifetime. 3M has scaled up UBT for production at 1.2 meter width. 3M is conducting extensive lifetime studies including: –Evaluation of customer processing and installation conditions; –Indoor accelerated testing of UBT film and full CIGS modules; –Outdoor testing of UBT film and CIGS modules. Results have been used to improve ultra barrier film performance for flex module applications.

  15. Evaluation of the residue from microset on various metal surfaces.

    SciTech Connect (OSTI)

    Brumbach, Michael Todd

    2011-04-01T23:59:59.000Z

    Fast-curing impression materials are sometimes used to cast negative-mold replications of physical defects on material surfaces. The negative-mold impressions can then be used for further measurements to record the nature of the defect. These impression materials have been designed to cure quickly, and with very low adhesion, so that they can be easily removed from the surface leaving little residual contamination. Unfortunately, some contaminant is retained by the substrate material. This investigation seeks to identify the composition and quantity of the remaining material upon removal of Microset Synthetic Rubber Replicating Compound from several material surfaces. Coe-Flex was used as a relative comparison to Microset. On fifteen different substrate materials the Microset leaves no visible trace of contaminant, however, X-ray photoelectron spectroscopy shows evidence of a thin silicone-based contaminant film of approximately 2 nm thickness.

  16. Reed valves for internal combustion engines

    SciTech Connect (OSTI)

    Boyesen, E.

    1987-09-29T23:59:59.000Z

    A two-cycle engine is described comprising a cylinder and a piston working in the cylinder. The engine has a compression chamber below the piston and a fuel intake system including a ported valve seat for delivering fuel into the compression chamber. The cylinder has an exhaust port and a transfer passage for delivering compressed fuel from the compression chamber to the space above the piston, and a reed valve overlying the port in the valve seat and adapted to flex away from the ported seat during the upward stroke of the piston. The reed valve is of multiple layer construction with an outlet layer formed of relatively rigid resin material and an inner layer presented inwardly for contact with the valve seat and formed of relatively flexible temperature-resistant synthetic rubber material. The rubber layer is thinner than the resin layer and the resin and rubber layers are adhesively bonded to each other.

  17. Flexible nuclear medicine camera and method of using

    DOE Patents [OSTI]

    Dilmanian, F. Avraham (Yaphank, NY); Packer, Samuel (Great Neck, NY); Slatkin, Daniel N. (Sound Beach, NY)

    1996-12-10T23:59:59.000Z

    A nuclear medicine camera 10 and method of use photographically record radioactive decay particles emitted from a source, for example a small, previously undetectable breast cancer, inside a patient. The camera 10 includes a flexible frame 20 containing a window 22, a photographic film 24, and a scintillation screen 26, with or without a gamma-ray collimator 34. The frame 20 flexes for following the contour of the examination site on the patient, with the window 22 being disposed in substantially abutting contact with the skin of the patient for reducing the distance between the film 24 and the radiation source inside the patient. The frame 20 is removably affixed to the patient at the examination site for allowing the patient mobility to wear the frame 20 for a predetermined exposure time period. The exposure time may be several days for obtaining early qualitative detection of small malignant neoplasms.

  18. M S MOLECULARES Rumo aos limites da miniaturiza o - (Molecular Magnets - towards the limits of miniaturization)

    SciTech Connect (OSTI)

    Reis, Mario S [Universidade Federal Fluminense, Brasil; Moreira Dos Santos, Antonio F [ORNL

    2010-01-01T23:59:59.000Z

    Por s culos, acreditou-se que o magnetismo s se manifestava em metais, como aqueles contendo ferro; hoje, a imagem mais comum de um m talvez seja a daquelas plaquinhas flex veis coladas geladeira com propagandas dos mais diversos tipos. O leitor conseguiria imaginar um material puramente org nico daqueles que formam os seres vivos como magn tico? E m s do tamanho de mol culas? fato: ambos existem. Esses novos materiais, conhecidos como magnetos moleculares, descobertos e desenvolvidos em v rios laborat rios do mundo, j re nem longa lista de aplica es, do tratamento do c ncer a refrigeradores ecol gicos, passando pela transmiss o de eletricidade sem perda de calor e a fabrica o de computadores extremamente velozes.

  19. Flexible nuclear medicine camera and method of using

    DOE Patents [OSTI]

    Dilmanian, F.A.; Packer, S.; Slatkin, D.N.

    1996-12-10T23:59:59.000Z

    A nuclear medicine camera and method of use photographically record radioactive decay particles emitted from a source, for example a small, previously undetectable breast cancer, inside a patient. The camera includes a flexible frame containing a window, a photographic film, and a scintillation screen, with or without a gamma-ray collimator. The frame flexes for following the contour of the examination site on the patient, with the window being disposed in substantially abutting contact with the skin of the patient for reducing the distance between the film and the radiation source inside the patient. The frame is removably affixed to the patient at the examination site for allowing the patient mobility to wear the frame for a predetermined exposure time period. The exposure time may be several days for obtaining early qualitative detection of small malignant neoplasms. 11 figs.

  20. Supported PV module assembly

    DOE Patents [OSTI]

    Mascolo, Gianluigi; Taggart, David F.; Botkin, Jonathan D.; Edgett, Christopher S.

    2013-10-15T23:59:59.000Z

    A supported PV assembly may include a PV module comprising a PV panel and PV module supports including module supports having a support surface supporting the module, a module registration member engaging the PV module to properly position the PV module on the module support, and a mounting element. In some embodiments the PV module registration members engage only the external surfaces of the PV modules at the corners. In some embodiments the assembly includes a wind deflector with ballast secured to a least one of the PV module supports and the wind deflector. An array of the assemblies can be secured to one another at their corners to prevent horizontal separation of the adjacent corners while permitting the PV modules to flex relative to one another so to permit the array of PV modules to follow a contour of the support surface.

  1. VOC Destruction by Catalytic Combustion Microturbine

    SciTech Connect (OSTI)

    Tom Barton

    2009-03-10T23:59:59.000Z

    This project concerned the application of a catalytic combustion system that has been married to a micro-turbine device. The catalytic combustion system decomposes the VOC's and transmits these gases to the gas turbine. The turbine has been altered to operate on very low-level BTU fuels equivalent to 1.5% methane in air. The performance of the micro-turbine for VOC elimination has some flexibility with respect to operating conditions, and the system is adaptable to multiple industrial applications. The VOC source that was been chosen for examination was the emissions from coal upgrading operations. The overall goal of the project was to examine the effectiveness of a catalytic combustion based system for elimination of VOCs while simultaneously producing electrical power for local consumption. Project specific objectives included assessment of the feasibility for using a Flex-Microturbine that generates power from natural gas while it consumes VOCs generated from site operations; development of an engineering plan for installation of the Flex-Microturbine system; operation of the micro-turbine through various changes in site and operation conditions; measurement of the VOC destruction quantitatively; and determination of the required improvements for further studies. The micro-turbine with the catalytic bed worked effectively to produce power on levels of fuel much lower than the original turbine design. The ability of the device to add or subtract supplemental fuel to augment the amount of VOC's in the inlet air flow made the device an effective replacement for a traditional flare. Concerns about particulates in the inlet flow and the presence of high sulfur concentrations with the VOC mixtures was identified as a drawback with the current catalytic design. A new microturbine design was developed based on this research that incorporates a thermal oxidizer in place of the catalytic bed for applications where particulates or contamination would limit the lifetime of the catalytic bed.

  2. High-Efficiency Low-Dross Combustion System for Aluminum Remelting Reverberatory Furnaces, Project Final Report, July 2005

    SciTech Connect (OSTI)

    Soupos, V.; Zelepouga, S.; Rue, D.

    2005-06-30T23:59:59.000Z

    GTI, and its commercial partners, have developed a high-efficiency low-dross combustion system that offers environmental and energy efficiency benefits at lower capital costs for the secondary aluminum industry users of reverberatory furnaces. The high-efficiency low-dross combustion system, also called Self-Optimizing Combustion System (SOCS), includes the flex-flame burner firing an air or oxygen-enriched natural gas flame, a non-contact optical flame sensor, and a combustion control system. The flex-flame burner, developed and tested by GTI, provides an innovative firing process in which the flame shape and velocity can be controlled. The burner produces a flame that keeps oxygen away from the bath surface by including an O2-enriched fuel-rich zone on the bottom and an air-fired fuel-lean zone on the top. Flame shape and velocity can be changed at constant firing rate or held constant over a range of firing conditions. A non-intrusive optical sensor is used to monitor the flame at all times. Information from the optical sensor(s) and thermocouples can be used to control the flow of natural gas, air, and oxygen to the burner as needed to maintain desired flame characteristics. This type of control is particularly important to keep oxygen away from the melt surface and thus reduce dross formation. This retrofit technology decreases fuel usage, increases furnace production rate, lowers gaseous emissions, and reduces dross formation. The highest priority research need listed under Recycled Materials is to turn aluminum process waste into usable materials which this technology accomplishes directly by decreasing dross formation and therefore increasing aluminum yield from a gas-fired reverberatory furnace. Emissions of NOx will be reduced to approximately 0.3 lb/ton of aluminum, in compliance with air emission regulations.

  3. The development of a new edition of the gamma-ray spectrum catalogues designed for presentation in electronic format

    SciTech Connect (OSTI)

    Heath, R.L.

    1997-05-01T23:59:59.000Z

    New editions of the original Gamma-ray Spectrum Catalogues are being prepared for publication in electronic format. The objective of this program is to produce versions of the Catalogues in CD-ROM format and as an Internet resource. Additions to the original content of the Catalogues will include integrated decay scheme drawings, tables of related decay data, and updated text on the techniques of gamma-ray spectrometry. Related decay data from the Evaluated Nuclear Structure Data File (ENSDF) are then added, and all data converted to the Adobe Acrobat (PDF) format for CD-ROM production and availability on the Internet. At a later date the catalogues will be expanded to include spectra representing the response of large-volume Ge detectors, alpha-particle spectra, prompt neutron capture and inelastic scattering gamma-ray spectra, and gross fission product spectra characteristic of fuel cycle waste materials. Characterization of radioactivity in materials is a requirement in many phases of radioactive waste management. Movement, shipping, treatment, all activities which involve handling of mixed waste or TRU categories of waste at all DOE sites will require that measurements and assessment documentation utilize basic nuclear data which are tracable to internationally accepted standard values. This program will involve the identification of data needs unique to the development and application of specialized detector systems for radioactive waste characterization.

  4. The Use of Exhaust Gas Recirculation to Optimize Fuel Economy and Minimize Emission in Engines Operating on E85 Fuel

    SciTech Connect (OSTI)

    Wu, Ko-Jen

    2011-12-31T23:59:59.000Z

    This report summarizes activities conducted for the project “The Use of Exhaust Gas Recirculation to Optimized Fuel Economy and Minimize Emissions in Engines Operating on E85 Fuel” under COOPERATIVE AGREEMENT NUMBER DE-FC26-07NT43271, which are as outlined in the STATEMENT OF PROJECT OBJECTIVES (SOPO) dated March 2007 and in the supplemental SOPO dated October 2010. The project objective was to develop and demonstrate an internal combustion engine that is optimized for E85 (85% ethanol and 15% gasoline) fuel operation to achieve substantially improved fuel economy while operating with E85 fuel and that is also production viable in the near- to medium-term. The key engine technology selected for research and development was turbocharging, which is known to improve fuel economy thru downsizing and is in particular capable of exploiting ethanol fuel’s characteristics of high octane number and high latent heat of vaporization. The engine further integrated synergistic efficiency improving technologies of cooled exhaust gas recirculation (EGR), direct fuel injection and dual continuously variable intake and exhaust cam phasers. On the vehicle level, fuel economy was furthered thru powertrain system optimization by mating a state-of-the-art six-speed automatic transmission to the engine. In order to achieve the project’s objective of near- to medium-term production viability, it was essential to develop the engine to be flex-fuel capable of operating with fuels ranging from E0 (0% ethanol and 100% gasoline) to E85 and to use three-way type of catalyst technology for exhaust aftertreatment. Within these scopes, various technologies were developed through systems approach to focus on ways to help accelerate catalyst light-off. Significant amount of development took place during the course of the project within General Motors, LLC. Many prototype flex-fuel engines were designed, built and developed with various hardware configurations selected to achieve the project goals. Several flex-fuel demonstration vehicles were designed and built for carrying out calibration development and final testing to quantify the technology merits. Based on the extensive test results collected from dynamometer and vehicle testing, the fuel economy benefits of cooled EGR from the intended level of turbocharger technology were quantified. When combined with turbo downsizing, the FE benefits are considered large enough for E0 fuel as well as for E85 fuel to warrant further development of the technology beyond the current proof-of-concept level to a level that can meet production driveability quality and durability requirements in order to meet customers’ expectations. Cold-start cart test results from the emissions segment of the project were positive, confirming the assumption of faster thermal response of turbo exhaust system for emissions reductions for both E0 and E85 fuels. Vehicle emissions test results directionally correlated to the cold-start cart findings. The limited number of test runs did demonstrate the potentials of meeting stringent emission standards, however, they did not comprehend the factors such as hardware variability and long-term durability, 3 which are essential for mass production to satisfy customers’ expectations. It is therefore recommended, moving forward, durability concerns over turbocharger, EGR system and aftertreatment system, which would likely impact production viability, should be addressed. The data moreover suggested that further FE increase is likely with turbocharger technology advancement.

  5. THE 3R ANTHRACITE CLEAN COAL TECHNOLOGY Economical Conversion of Browncoal to Anthracite Type Clean Coal by Low Temperature Carbonization Pre-Treatment Process

    E-Print Network [OSTI]

    Edward Someus

    The pre ven tive pre-treat ment of low grade solid fu els is safer, faster, better, and less costly vs. the “end-of-the-pipe ” post treat ment so lu tions. The “3R ” (Re cy cle-Re duce-Re use) in te grated en vi ron-ment con trol tech nol ogy pro vides pre ven tive pre-treat ment of low grade solid fu els, such as brown coal and con tam i nated solid fu els to achieve high grade cleansed fu els with an thra cite and coke com-pa ra ble qual ity. The goal of the 3R tech nol ogy is to pro vide cost ef fi cient and en vi ron men tally sus-tain able so lu tions by pre ven tive pre-treat ment means for ex tended op er a tions of the solid fuel com-bus tion power plants with ca pac ity up to 300 MWe power ca pac i ties. The 3R An thra cite Clean Coal end prod uct and tech nol ogy may ad van ta geously be in te grated to the oxyfuel – oxy-fir ing, Fos ter Wheeler an thra cite arc-fired util ity type boiler and Heat Pipe Re former tech nol o gies in com bi na tion with CO2 cap ture and stor age pro grams. The 3R tech nol ogy is pat ented orig i nal so lu tion. Ad van tages. Feedstock flex i bil ity: ap pli ca tion of pre-treated multi fu els from wider fuel se lec tion and avail abil ity. Im proved burn ing ef fi ciency. Tech nol ogy flex i bil ity: ef fi cient and ad van ta geous inter-link to proven boiler tech nol o gies, such as oxyfuel and arc-fired boil ers. Near zero pol lut ants for haz ard ous-air-pol lut ants: pre ven tive sep a ra tion of halo gens and heavy met als into small vol ume streams prior uti li za tion of cleansed fu els. ?97 % or ganic sul phur re moval achieved by the 3R ther-

  6. Multi-institutional dosimetric and geometric commissioning of image-guided small animal irradiators

    SciTech Connect (OSTI)

    Lindsay, P. E., E-mail: Patricia.Lindsay@rmp.uhn.on.ca [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9, Canada and Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5S 1A1 (Canada); Granton, P. V.; Hoof, S. van; Hermans, J. [Department of Radiation Oncology (MAASTRO), GROW - School for Oncology and Developmental Biology, Maastricht University Medical Center, Maastricht 6201 BN (Netherlands)] [Department of Radiation Oncology (MAASTRO), GROW - School for Oncology and Developmental Biology, Maastricht University Medical Center, Maastricht 6201 BN (Netherlands); Gasparini, A. [Department of Radiation Oncology, The Netherlands Cancer Institute, Amsterdam (Netherlands)] [Department of Radiation Oncology, The Netherlands Cancer Institute, Amsterdam (Netherlands); Jelveh, S. [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9, Canada and Department of Radiation Oncology, The Netherlands Cancer Institute, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands)] [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9, Canada and Department of Radiation Oncology, The Netherlands Cancer Institute, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Clarkson, R. [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9 (Canada) [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9 (Canada); Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5S 1A1 (Canada); Mid-South Radiation Physics, Inc., 1801 South 54th Street, Paragould, Arkansas 72450 (United States); Kaas, J.; Wittkamper, F.; Sonke, J.-J. [Department of Radiation Oncology, The Netherlands Cancer Institute, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands)] [Department of Radiation Oncology, The Netherlands Cancer Institute, Plesmanlaan 121, 1066 CX Amsterdam (Netherlands); Verhaegen, F. [Department of Radiation Oncology (MAASTRO), GROW - School for Oncology and Developmental Biology, Maastricht University Medical Center, Maastricht 6201 BN (Netherlands) [Department of Radiation Oncology (MAASTRO), GROW - School for Oncology and Developmental Biology, Maastricht University Medical Center, Maastricht 6201 BN (Netherlands); Medical Physics Unit, Department of Oncology, McGill University, Montreal, Québec H3G 1A4 (Canada); Jaffray, D. A. [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9 (Canada) [Radiation Medicine Program, Princess Margaret Hospital, 610 University Avenue, Toronto, Ontario M5G 2M9 (Canada); Department of Radiation Oncology, University of Toronto, Toronto, Ontario M5S 1A1 (Canada); The TECHNA Institute for the Advancement of Technology for Health, Toronto, Ontario M5G 1P5 (Canada)

    2014-03-15T23:59:59.000Z

    Purpose: To compare the dosimetric and geometric properties of a commercial x-ray based image-guided small animal irradiation system, installed at three institutions and to establish a complete and broadly accessible commissioning procedure. Methods: The system consists of a 225 kVp x-ray tube with fixed field size collimators ranging from 1 to 44 mm equivalent diameter. The x-ray tube is mounted opposite a flat-panel imaging detector, on a C-arm gantry with 360° coplanar rotation. Each institution performed a full commissioning of their system, including half-value layer, absolute dosimetry, relative dosimetry (profiles, percent depth dose, and relative output factors), and characterization of the system geometry and mechanical flex of the x-ray tube and detector. Dosimetric measurements were made using Farmer-type ionization chambers, small volume air and liquid ionization chambers, and radiochromic film. The results between the three institutions were compared. Results: At 225 kVp, with 0.3 mm Cu added filtration, the first half value layer ranged from 0.9 to 1.0 mm Cu. The dose-rate in-air for a 40 × 40 mm{sup 2} field size, at a source-to-axis distance of 30 cm, ranged from 3.5 to 3.9 Gy/min between the three institutions. For field sizes between 2.5 mm diameter and 40 × 40 mm{sup 2}, the differences between percent depth dose curves up to depths of 3.5 cm were between 1% and 4% on average, with the maximum difference being 7%. The profiles agreed very well for fields >5 mm diameter. The relative output factors differed by up to 6% for fields larger than 10 mm diameter, but differed by up to 49% for fields ?5 mm diameter. The mechanical characteristics of the system (source-to-axis and source-to-detector distances) were consistent between all three institutions. There were substantial differences in the flex of each system. Conclusions: With the exception of the half-value layer, and mechanical properties, there were significant differences between the dosimetric and geometric properties of the three systems. This underscores the need for careful commissioning of each individual system for use in radiobiological experiments.

  7. 14%-efficient flexible CdTe solar cells on ultra-thin glass substrates

    SciTech Connect (OSTI)

    Rance, W. L.; Burst, J. M.; Reese, M. O.; Gessert, T. A.; Metzger, W. K.; Barnes, T. M. [National Renewable Energy Laboratory, Golden, Colorado 80401 (United States); Meysing, D. M.; Wolden, C. A. [Colorado School of Mines, Golden, Colorado 80401 (United States); Garner, S.; Cimo, P. [Corning Incorporated, Corning, New York 14831 (United States)

    2014-04-07T23:59:59.000Z

    Flexible glass enables high-temperature, roll-to-roll processing of superstrate devices with higher photocurrents than flexible polymer foils because of its higher optical transmission. Using flexible glass in our high-temperature CdTe process, we achieved a certified record conversion efficiency of 14.05% for a flexible CdTe solar cell. Little has been reported on the flexibility of CdTe devices, so we investigated the effects of three different static bending conditions on device performance. We observed a consistent trend of increased short-circuit current and fill factor, whereas the open-circuit voltage consistently dropped. The quantum efficiency under the same static bend condition showed no change in the response. After storage in a flexed state for 24 h, there was very little change in device efficiency relative to its unflexed state. This indicates that flexible glass is a suitable replacement for rigid glass substrates, and that CdTe solar cells can tolerate bending without a decrease in device performance.

  8. RECOVERY ACT: MULTIMODAL IMAGING FOR SOLAR CELL MICROCRACK DETECTION

    SciTech Connect (OSTI)

    Janice Hudgings; Lawrence Domash

    2012-02-08T23:59:59.000Z

    Undetected microcracks in solar cells are a principal cause of failure in service due to subsequent weather exposure, mechanical flexing or diurnal temperature cycles. Existing methods have not been able to detect cracks early enough in the production cycle to prevent inadvertent shipment to customers. This program, sponsored under the DOE Photovoltaic Supply Chain and Cross-Cutting Technologies program, studied the feasibility of quantifying surface micro-discontinuities by use of a novel technique, thermoreflectance imaging, to detect surface temperature gradients with very high spatial resolution, in combination with a suite of conventional imaging methods such as electroluminescence. The project carried out laboratory tests together with computational image analyses using sample solar cells with known defects supplied by industry sources or DOE National Labs. Quantitative comparisons between the effectiveness of the new technique and conventional methods were determined in terms of the smallest detectable crack. Also the robustness of the new technique for reliable microcrack detection was determined at various stages of processing such as before and after antireflectance treatments. An overall assessment is that the new technique compares favorably with existing methods such as lock-in thermography or ultrasonics. The project was 100% completed in Sept, 2010. A detailed report of key findings from this program was published as: Q.Zhou, X.Hu, K.Al-Hemyari, K.McCarthy, L.Domash and J.Hudgings, High spatial resolution characterization of silicon solar cells using thermoreflectance imaging, J. Appl. Phys, 110, 053108 (2011).

  9. Utilization of Renewable Oxygenates as Gasoline Blending Components

    SciTech Connect (OSTI)

    Yanowitz, J.; Christensen, E.; McCormick, R. L.

    2011-08-01T23:59:59.000Z

    This report reviews the use of higher alcohols and several cellulose-derived oxygenates as blend components in gasoline. Material compatibility issues are expected to be less severe for neat higher alcohols than for fuel-grade ethanol. Very little data exist on how blending higher alcohols or other oxygenates with gasoline affects ASTM Standard D4814 properties. Under the Clean Air Act, fuels used in the United States must be 'substantially similar' to fuels used in certification of cars for emission compliance. Waivers for the addition of higher alcohols at concentrations up to 3.7 wt% oxygen have been granted. Limited emission testing on pre-Tier 1 vehicles and research engines suggests that higher alcohols will reduce emissions of CO and organics, while NOx emissions will stay the same or increase. Most oxygenates can be used as octane improvers for standard gasoline stocks. The properties of 2-methyltetrahydrofuran, dimethylfuran, 2-methylfuran, methyl pentanoate and ethyl pentanoate suggest that they may function well as low-concentration blends with gasoline in standard vehicles and in higher concentrations in flex fuel vehicles.

  10. Blender Pump Fuel Survey: CRC Project E-95

    SciTech Connect (OSTI)

    Alleman, T. L.

    2011-07-01T23:59:59.000Z

    To increase the number of ethanol blends available in the United States, several states have 'blender pumps' that blend gasoline with flex-fuel vehicle (FFV) fuel. No specification governs the properties of these blended fuels, and little information is available about the fuels sold at blender pumps. No labeling conventions exist, and labeling on the blender pumps surveyed was inconsistent.; The survey samples, collected across the Midwestern United States, included the base gasoline and FFV fuel used in the blends as well as the two lowest blends offered at each station. The samples were tested against the applicable ASTM specifications and for critical operability parameters. Conventional gasoline fuels are limited to 10 vol% ethanol by the U.S. EPA. The ethanol content varied greatly in the samples. Half the gasoline samples contained some ethanol, while the other half contained none. The FFV fuel samples were all within the specification limits. No pattern was observed for the blend content of the higher ethanol content samples at the same station. Other properties tested were specific to higher-ethanol blends. This survey also tested the properties of fuels containing ethanol levels above conventional gasoline but below FFV fuels.

  11. Flexible horseshoe

    DOE Patents [OSTI]

    Ford, Donald F. (2011 D Sierra Rd., Concord, CA 94518)

    1985-01-01T23:59:59.000Z

    A screw-on horseshoe formed from a plastic material is disclosed. A flex joint is provided that allows the horseshoe to expand and contract as pressure is applied to the horse's hoof, thereby reducing friction between the hoof and the shoe. The horseshoe also provides a lip portion projecting upwardly from a horseshoe base portion to protect the horse hoof wall from obstacles encountered during the movement of the horse. A novel screw having a double helix thread pattern including a high thread pattern and a low thread pattern is used to fasten the horseshoe to the horse's hoof without piercing the hoof wall. The screw includes a keyed recessed self-holding head that is complementary to, and therefore readily driven by, a power drill. A lightweight, yet wear-resistant, horseshoe that is readily attached to a horse's hoof with a minimum amount of labor and a minimum amount of damage to the hoof that can be constructed in many styles and sizes to match a large variety of horse uses is thus described.

  12. Refueling Behavior of Flexible Fuel Vehicle Drivers in the Federal Fleet

    SciTech Connect (OSTI)

    Daley, R.; Nangle, J.; Boeckman, G.; Miller, M.

    2014-05-01T23:59:59.000Z

    Federal fleets are a frequent subject of legislative and executive efforts to lead a national transition to alternative fuels and advanced vehicle technologies. Section 701 of the Energy Policy Act of 2005 requires that all dual-fueled alternative fuel vehicles in the federal fleet be operated on alternative fuel 100% of the time when they have access to it. However, in Fiscal Year (FY) 2012, drivers of federal flex fuel vehicles (FFV) leased through the General Services Administration refueled with E85 24% of the time when it was available--falling well short of the mandate. The U.S. Department of Energy's National Renewable Energy Laboratory completed a 2-year Laboratory Directed Research and Development project to identify the factors that influence the refueling behavior of federal FFV drivers. The project began with two primary hypotheses. First, information scarcity increases the tendency to miss opportunities to purchase E85. Second, even with perfect information, there are limits to how far drivers will go out of their way to purchase E85. This paper discusses the results of the project, which included a June 2012 survey of federal fleet drivers and an empirical analysis of actual refueling behavior from FY 2009 to 2012. This research will aid in the design and implementation of intervention programs aimed at increasing alternative fuel use and reducing petroleum consumption.

  13. Subsidence as factor in development of listric-faulted rollover anticlines, Gulf of Mexico basin

    SciTech Connect (OSTI)

    Padgham, J.B.

    1989-03-01T23:59:59.000Z

    Syndepositional subsidence of deltaic clastics into finer grained sediments has long been recognized in the Gulf of Mexico basin. This subsidence influences the size and shape of typical listric-faulted rollover anticlines. Rollovers that form through loading, subsidence, and fault slip involve the compaction of faulted. This reduces the fault dip angle and changes the shape of the faulted limb. However, compaction cannot account for severe reductions in this angle. Based on conceptual models, photographs of a laboratory experiment, and current seismic interpretations, listric faults are depressed and flattened as new sedimentation presses underlying abnormally pressured shales, deforming them through flexure flow into ridges and synclines. Examples include a rollover formed through downthrown loading, and thick Pleistocene rollover limbs extended through massive loading. Through subsidence, fault dip azimuth was reversed in one case; in another, loading uniformly depressed tilted upthrown beds, forming a conveyor that supplied a growing downslope diapir. Synclinal and anticlinal curvature in many rollover limbs apparently results from compaction. Similar curvature was developed in computer models. A conceptual model of a rollover formed as a slump is compared to rollovers offshore Texas. It is suggested that shallow subsidence along the Brazos Ridge fault produced a broad, low-relief anticline, and that subsidence, not deep-seated uplift, flexed crestal beds to produce tension faults.

  14. Optimally Controlled Flexible Fuel Powertrain System

    SciTech Connect (OSTI)

    Hakan Yilmaz; Mark Christie; Anna Stefanopoulou

    2010-12-31T23:59:59.000Z

    The primary objective of this project was to develop a true Flex Fuel Vehicle capable of running on any blend of ethanol from 0 to 85% with reduced penalty in usable vehicle range. A research and development program, targeting 10% improvement in fuel economy using a direct injection (DI) turbocharged spark ignition engine was conducted. In this project a gasoline-optimized high-technology engine was considered and the hardware and configuration modifications were defined for the engine, fueling system, and air path. Combined with a novel engine control strategy, control software, and calibration this resulted in a highly efficient and clean FFV concept. It was also intended to develop robust detection schemes of the ethanol content in the fuel integrated with adaptive control algorithms for optimized turbocharged direct injection engine combustion. The approach relies heavily on software-based adaptation and optimization striving for minimal modifications to the gasoline-optimized engine hardware system. Our ultimate objective was to develop a compact control methodology that takes advantage of any ethanol-based fuel mixture and not compromise the engine performance under gasoline operation.

  15. Refueling machine with relative positioning capability

    DOE Patents [OSTI]

    Challberg, R.C.; Jones, C.R.

    1998-12-15T23:59:59.000Z

    A refueling machine is disclosed having relative positioning capability for refueling a nuclear reactor. The refueling machine includes a pair of articulated arms mounted on a refueling bridge. Each arm supports a respective telescoping mast. Each telescoping mast is designed to flex laterally in response to application of a lateral thrust on the end of the mast. A pendant mounted on the end of the mast carries an air-actuated grapple, television cameras, ultrasonic transducers and waterjet thrusters. The ultrasonic transducers are used to detect the gross position of the grapple relative to the bail of a nuclear fuel assembly in the fuel core. The television cameras acquire an image of the bail which is compared to a pre-stored image in computer memory. The pendant can be rotated until the television image and the pre-stored image match within a predetermined tolerance. Similarly, the waterjet thrusters can be used to apply lateral thrust to the end of the flexible mast to place the grapple in a fine position relative to the bail as a function of the discrepancy between the television and pre-stored images. 11 figs.

  16. Wastewater heat recovery method and apparatus

    DOE Patents [OSTI]

    Kronberg, J.W.

    1991-01-01T23:59:59.000Z

    This invention is comprised of a heat recovery system with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature.

  17. Three-dimensional graphene/LiFePO{sub 4} nanostructures as cathode materials for flexible lithium-ion batteries

    SciTech Connect (OSTI)

    Ding, Y.H., E-mail: yhding@xtu.edu.cn [College of Chemical Engineering, Xiangtan University, Hunan 411105 (China); Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China); Ren, H.M. [Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China); Huang, Y.Y. [BTR New Energy Materials Inc., Shenzhen 518000 (China); Chang, F.H.; Zhang, P. [Institute of Rheology Mechanics, Xiangtan University, Hunan 411105 (China)

    2013-10-15T23:59:59.000Z

    Graphical abstract: Graphene/LiFePO{sub 4} composites as a high-performance cathode material for flexible lithium-ion batteries have been prepared by using a co-precipitation method to synthesize graphene/LiFePO4 powders as precursors and then followed by a solvent evaporation process. - Highlights: • Flexible LiFePO{sub 4}/graphene films were prepared first time by a solvent evaporation process. • The flexible electrode exhibited a high discharge capacity without conductive additives. • Graphene network offers the electrode adequate strength to withstand repeated flexing. - Abstract: Three-dimensional graphene/LiFePO{sub 4} nanostructures for flexible lithium-ion batteries were successfully prepared by solvent evaporation method. Structural characteristics of flexible electrodes were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Electrochemical performance of graphene/LiFePO{sub 4} was examined by a variety of electrochemical testing techniques. The graphene/LiFePO{sub 4} nanostructures showed high electrochemical properties and significant flexibility. The composites with low graphene content exhibited a high capacity of 163.7 mAh g{sup ?1} at 0.1 C and 114 mAh g{sup ?1} at 5 C without further incorporation of conductive agents.

  18. Effects of Second-Order Hydrodynamic Forces on Floating Offshore Wind Turbines

    SciTech Connect (OSTI)

    Duarte, T.; Sarmento, A. J. N. A.; Jonkman, J.

    2014-04-01T23:59:59.000Z

    Relative to first-order, second-order wave-excitation loads are known to cause significant motions and additional loads in offshore oil and gas platforms. The design of floating offshore wind turbines was partially inherited from the offshore oil and gas industry. Floating offshore wind concepts have been studied with powerful aero-hydro-servo-elastic tools; however, most of the existing work on floating offshore wind turbines has neglected the contribution of second-order wave-excitation loads. As a result, this paper presents a computationally efficient methodology to consider these loads within FAST, a wind turbine computer-aided engineering tool developed by the National Renewable Energy Laboratory. The method implemented was verified against the commercial OrcaFlex tool, with good agreement, and low computational time. A reference floating offshore wind turbine was studied under several wind and wave load conditions, including the effects of second-order slow-drift and sum-frequency loads. Preliminary results revealed that these loads excite the turbine's natural frequencies, namely the surge and pitch natural frequencies.

  19. Wastewater heat recovery apparatus

    DOE Patents [OSTI]

    Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

    1992-01-01T23:59:59.000Z

    A heat recovery system with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature.

  20. ALMA Nutator Design and Preliminary Performance

    E-Print Network [OSTI]

    Martin-Cocher, Pierre; Koch, Patrick M; Ni, Chih-Wen; Chen, Wei-Long; Chen, Ming-Tang; Raffin, Philippe; Ong, Chin-Long; Ho, Paul T P; Symmes, Arthur

    2013-01-01T23:59:59.000Z

    We report the past two years of collaboration between the di?erent actors on the ALMA nutator. Building on previous developments, the nutator has seen changes in much of the design. A high-modulus carbon ?fiber structure has been added on the back of the mirror in order to transfer the voice coils forces with less deformation, thus reducing delay problems due to flexing. The controller is now an off?-the-shelf National Instrument NI-cRIO, and the ampli?fier a class D servo drive from Advanced Motion Controls, with high peak power able to drive the coils at 300 Volts DC. The stow mechanism has been totally redesigned to improve on the repeatability and precision of the stow position, which is also the reference for the 26 bits Heidenhain encoders. This also improves on the accuracy of the stow position with wind loading. Finally, the software, written largely with National Instrument's LabView, has been developed. We will discuss these changes and the preliminary performances achieved to date. Keywords: ALMA, ...

  1. Customer interface document for the Molten Salt Test Loop (MSTL) system.

    SciTech Connect (OSTI)

    Pettit, Kathleen; Kolb, William J.; Gill, David Dennis; Briggs, Ronald D.

    2012-03-01T23:59:59.000Z

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate 'solar salt' and can circulate the salt at pressure up to 600psi, temperature to 585 C, and flow rate of 400-600GPM depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  2. Ground Magnetic Data for west-central Colorado

    SciTech Connect (OSTI)

    Zehner, Richard

    2012-03-08T23:59:59.000Z

    Ground Magnetic Data for west-central Colorado Modeled ground magnetic data was extracted from the Pan American Center for Earth and Environmental Studies database at http://irpsrvgis08.utep.edu/viewers/Flex/GravityMagnetic/GravityMagnetic_CyberShare/ on 2/29/2012. The downloaded text file was then imported into an Excel spreadsheet. This spreadsheet data was converted into an ESRI point shapefile in UTM Zone 13 NAD27 projection, showing location and magnetic field strength in nano-Teslas. This point shapefile was then interpolated to an ESRI grid using an inverse-distance weighting method, using ESRI Spatial Analyst. The grid was used to create a contour map of magnetic field strength. This dataset includes the raw spreadsheet data, an ESRI point shapefile showing magnetic sample locations and magnetic field strength, and an ESRI line shapefile showing magnetic contours. Projection: UTM Zone 13 NAD27 Magnetic Contour Shapefile Extent: West -108.698836 East -105.283977 North 41.048206 South 36.950086 Magnetic Point Shapefile Extent: West -108.698832 East -105.283908 North 41.048142 South 36.950086

  3. High-Current Effects in The PEP-II Storage Rings

    SciTech Connect (OSTI)

    Wienands, U.; Sullivan, M.K.; Akre, R.; Cheng, W.; Colocho, W.; DeBarger, S.; Decker, F.-J.; Ecklund, S.; Fisher, A.; Kharakh, D.; Krasnykh, A.; Novokhatski, A.; /SLAC

    2009-06-19T23:59:59.000Z

    High beam currents in PEP-II have been a challenge for vacuum system and ring components. For the {approx} 1 cm long bunches peak currents exceed 100 A and modest impedance can give rise to voltage spikes and discharges. During the last two runs, difficulties arose from rf seals at the 'flex flanges' in the HER. High temperatures were seen and the seals turned out to be severely damaged by discharges. In the LER, the horizontal stripline kickers of the bunch-by-bunch feedback system experiences breakdown at high bunch current-Macor pins installed for mechanical stability turned out to be a weak spot causing discharges. Finally, in the HER an experiment to shorten the ion-clearing gap in the beam revealed signs of ion-induced instability indicating that the HER has been operating quite close to the stability limit. The effects shown here are relevant to future high-intensity electron and positron rings like SuperB and PEP-X.

  4. Wastewater heat recovery apparatus

    DOE Patents [OSTI]

    Kronberg, J.W.

    1992-09-01T23:59:59.000Z

    A heat recovery system is described with a heat exchanger and a mixing valve. A drain trap includes a heat exchanger with an inner coiled tube, baffle plate, wastewater inlet, wastewater outlet, cold water inlet, and preheated water outlet. Wastewater enters the drain trap through the wastewater inlet, is slowed and spread by the baffle plate, and passes downward to the wastewater outlet. Cold water enters the inner tube through the cold water inlet and flows generally upward, taking on heat from the wastewater. This preheated water is fed to the mixing valve, which includes a flexible yoke to which are attached an adjustable steel rod, two stationary zinc rods, and a pivoting arm. The free end of the arm forms a pad which rests against a valve seat. The rods and pivoting arm expand or contract as the temperature of the incoming preheated water changes. The zinc rods expand more than the steel rod, flexing the yoke and rotating the pivoting arm. The pad moves towards the valve seat as the temperature of the preheated water rises, and away as the temperature falls, admitting a variable amount of hot water to maintain a nearly constant average process water temperature. 6 figs.

  5. Hydroacoustic Evaluation of Fish Passage Through Bonneville Dam in 2005

    SciTech Connect (OSTI)

    Ploskey, Gene R.; Weiland, Mark A.; Zimmerman, Shon A.; Hughes, James S.; Bouchard, Kyle E.; Fischer, Eric S.; Schilt, Carl R.; Hanks, Michael E.; Kim, Jina; Skalski, John R.; Hedgepeth, J.; Nagy, William T.

    2006-12-04T23:59:59.000Z

    The Portland District of the U.S. Army Corps of Engineers requested that the Pacific Northwest National Laboratory (PNNL) conduct fish-passage studies at Bonneville Dam in 2005. These studies support the Portland District's goal of maximizing fish-passage efficiency (FPE) and obtaining 95% survival for juvenile salmon passing Bonneville Dam. Major passage routes include 10 turbines and a sluiceway at Powerhouse 1 (B1), an 18-bay spillway, and eight turbines and a sluiceway at Powerhouse 2 (B2). In this report, we present results of two studies related to juvenile salmonid passage at Bonneville Dam. The studies were conducted between April 16 and July 15, 2005, encompassing most of the spring and summer migrations. Studies included evaluations of (1) Project fish passage efficiency and other major passage metrics, and (2) smolt approach and fate at B1 Sluiceway Outlet 3C from the B1 forebay. Some of the large appendices are only presented on the compact disk (CD) that accompanies the final report. Examples include six large comma-separated-variable (.CSV) files of hourly fish passage, hourly variances, and Project operations for spring and summer from Appendix E, and large Audio Video Interleave (AVI) files with DIDSON-movie clips of the area upstream of B1 Sluiceway Outlet 3C (Appendix H). Those video clips show smolts approaching the outlet, predators feeding on smolts, and vortices that sometimes entrained approaching smolts into turbines. The CD also includes Adobe Acrobat Portable Document Files (PDF) of the entire report and appendices.

  6. Use of Semiflexible Applicators for Radiofrequency Ablation of Liver Tumors

    SciTech Connect (OSTI)

    Gaffke, G., E-mail: gunnar.gaffke@charite.de; Gebauer, B.; Knollmann, F.D. [Universitaetsmedizin Berlin, Klinik fuer Strahlenheilkunde und Poliklinik, Charite (Germany); Helmberger, T. [Universitaet Muenchen, Institut fuer klinische Radiologie Grosshadern (Germany); Ricke, J. [Universitaetsmedizin Berlin, Klinik fuer Strahlenheilkunde und Poliklinik, Charite (Germany); Oettle, H. [Universitaetsmedizin Berlin, Campus-Virchow-Klinikum, Medizinische Klinik mit Schwerpunkt Haematologie und Onkologie der Charite (Germany); Felix, R.; Stroszczynski, C. [Universitaetsmedizin Berlin, Klinik fuer Strahlenheilkunde und Poliklinik, Charite (Germany)

    2006-04-15T23:59:59.000Z

    Purpose. To evaluate the feasibility and potential advantages of the radiofrequency ablation of liver tumors using new MRI-compatible semiflexible applicators in a closed-bore high-field MRI scanner. Methods. We treated 8 patients with 12 malignant liver tumors of different origin (5 colorectal carcinoma, 2 cholangiocellular carcinoma, 1 breast cancer) under MRI guidance. Radiofrequency ablation (RFA) was performed using 5 cm Rita Starburst Semi-Flex applicators (Rita Medical Systems, Milwaukee, WI, USA) which are suitable for MR- and CT-guided interventions and a 150 W RF generator. All interventions were performed in a closed-bore 1.5 T high-field MRI scanner for MRI-guided RFA using fast T1-weighted gradient echo sequences and T2-weighted ultra-turbo spin echo sequences. Control and follow-up MRI examinations were performed on the next day, at 6 weeks, and every 3 months after RFA. Control MRI were performed as double-contrast MRI examinations (enhancement with iron oxide and gadopentetate dimeglumine). All interventions were performed with the patient under local anesthesia and analgo-sedation. Results. The mean diameter of the treated hepatic tumors was 2.4 cm ({+-}0.6 cm, range 1.0-3.2 cm). The mean diameter of induced necrosis was 3.1 cm ({+-}0.4 cm). We achieved complete ablation in all patients. Follow-up examinations over a duration of 7 months ({+-}1.3 months, range 4-9 month) showed a local control rate of 100% in this group of patients. All interventions were performed without major complications; only 2 subcapsular hematomas were documented. Conclusion. RFA of liver tumors using semiflexible applicators in closed-bore 1.5 T scanner systems is feasible. These applicators might simplify the RFA of liver tumors under MRI control. The stiff distal part of the applicator facilitates its repositioning.

  7. RP-5 Renewable Energy Efficiency Project

    SciTech Connect (OSTI)

    Neil Clifton; Eliza Jane Whitman; Jamal A. Zughbi

    2003-07-28T23:59:59.000Z

    This is the fourth quarterly technical report for the RP-5 Renewable Energy Efficiency Project. The report summarizes the work progress, effort and activities that took place during the period of April 1, 2003 to June 30, 2003. However, IEUA is preparing a Supplemental report that will be mailed to the Department of Energy (DOE) by August 1, 2003, that provides additional information regarding IEUA's plan to expedite certain project activities. The report has been prepared in accordance with the Department of Energy (DOE) Guidelines. This technical report covers all meetings, discussions, and engineering and design activities that took place to finalize the project scope of work and complete the Request for Proposal (RFP) for the RP-5 Renewable Energy Efficiency Project. IEUA has decided to invite three more consulting engineering firms besides CH2M Hill, the Public Interest Energy Research (PIER) Consultant, to submit proposals for the design of the energy efficiency project. The proposals are currently in the evaluation phase and a decision is expected by the end of July. IEUA moved to its new headquarters building on June 13, 2003. The central plant is the system that supplies cooling and heating water to the headquarters building, and it primarily consists of equipment listed in the cooperative agreement under ''Chiller and Heater''. The central plant equipment was successfully installed and started. Other activities include gas analysis of three sources of low quality digester gas and foul air which could be used as fuel for an innovative flex microturbine. IEUA is also working with Stirling Energy Systems to determine if the Agency should be a host site for their equipment for testing the engine's operation on digester and natural gas. A matching funds update is also included in the Results and Discussion section, which presents the work effort performed by the PIER Consultant and the associated costs that serve as matching funds for the RP-5 Project during this report period.

  8. Simulation of the part-load behavior of a 30 MWe SEGS plant

    SciTech Connect (OSTI)

    Lippke, F.

    1995-06-01T23:59:59.000Z

    The part-load behavior of a typical 30-MWe SEGS (solar electric generating systems) plant was studied using a detailed thermodynamic model. As part of this analysis, a new solar field model was derived, based on measurement results of an LS-2 Collector and accounting for various conditions of receiver tubes, lost mirrors and measured reflectivity. A comparison was made of the model results to real plant conditions for a winter and summer day in order to test the accuracy of the model. The effects of bare tubes, different wind speeds, mirror reflectivity and other factors were studied showing, e.g., that heat losses due to wind are predicted to be very low. The comparison also shows that the model still lacks the capability to fully account for actual solar field conditions. The model was also compared to the SOLERGY model, showing differences between the assumptions used in both models. Finally different operating conditions of the plant were studied for a summer, fall, and winter day to provide a better understanding of how changing solar field outlet temperatures affect gross and net output of the plant. This clearly indicates that the lowest possible superheating temperature maximizes the gross electric output. On a net basis this conclusion is modified due to the high parasitics of the HTF (heat transfer fluid) pumps. It was found that the optimum operating strategy depends on the insolation conditions, e.g., different superheating temperatures should be chosen in summer, fall and winter. If the pressure drop in the solar field is reduced due to replacement of flex hoses with ball joints, increasing the HTF flow is more reasonable, so that at low isolation conditions the lowest possible superheating temperature also leads to the maximum net output.

  9. The significance of Rb-Sr glauconite ages, Bonneterre Formation, Missouri; Late Devonian-Early Mississippian brine migration in the midcontinent

    SciTech Connect (OSTI)

    Stein, H.J. (Geological Survey, Denver, CO (USA)); Kish, S.A. (Florida State Univ., Tallahassee (USA))

    1991-05-01T23:59:59.000Z

    Rb-Sr mean model ages of 370 {plus minus} 10 Ma for glauconites from the Cambrian lower Bonneterre Formation in southern and central Missouri are in excellent agreement with a Rb-Sr isochron age of 359 {plus minus} 22 Ma for glauconites from the Magmont mine (Viburnum Trend) in the southeast Missouri lead district. The lower Bonneterre and Magmont mines ages probably reflect isotopic resetting, most likely associated with dolomitization and/or Mississippi Valley-type ore formation in the southeast Missouri lead district. The temporal relation between widespread dolomitization and ore formation in Missouri is unclear, but mounting evidence for two Devonian disturbances permits the following interpretation: (1) a Devonian timing (380-400 Ma) for widespread dolomitization, and (2) a Late Devonian-Early Mississippian timing (360-370 Ma) for ore formation in southeast Missouri. Late Devonian-Early Mississippian fluids associated with the earliest stages of collisional tectonics and metamorphism to the south and southeast may have been important in the formation of southeast Missouri ore deposits. These tectonically driven waters may themselves have been the Mississippi Valley-type ore fluids, entering Missouri by way of the Black Warrior basin and Reelfoot rift and/or the Arkoma basin. Alternatively, the movement of orogenic fluids hundreds of kilometers distant may have initiated and distally influenced the migration of more locally derived Mississippi Valley-type ore fluids. Broad regions of Missouri and adjacent areas experienced heating and crustal flexing in the Late Devonian, and consequently, preservation of elevated temperatures in Mississippi Valley-type fluids as they move great lateral distances may not be necessary for ore formation in southeast Missouri.

  10. Investigation of the Meers fault in southwestern Oklahoma

    SciTech Connect (OSTI)

    Luza, K.V.; Madole, R.F.; Crone, A.J.

    1987-08-01T23:59:59.000Z

    The Meers fault is part of a major system of NW-trending faults that form the boundary between the Wichita Mountains and the Anadarko basin in southwestern Oklahoma. A portion of the Meers fault is exposed at the surface in northern Comanche County and strikes approximately N. 60/sup 0/ W. where it offsets Permian conglomerate and shale for at least 26 km. The scarp on the fault is consistently down to the south, with a maximum relief of 5 m near the center of the fault trace. Quaternary stratigraphic relationships and 10 /sup 14/C age dates constrain the age of the last movement of the Meers fault. The last movement postdates the Browns Creek Alluvium, late Pleistocene to early Holocene, and predates the East Cache Alluvium, 100 to 800 yr B.P. Fan alluvium, produced by the last fault movement, buried a soil that dates between 1400 and 1100 yr B.P. Two trenches excavated across the scarp near Canyon Creek document the near-surface deformation and provide some general information on recurrence. Trench 1 was excavated in the lower Holocene part of the Browns Creek Alluvium, and trench 2 was excavated in unnamed gravels thought to be upper Pleistocene. Flexing and warping was the dominant mode of deformation that produced the scarp. The stratigraphy in both trenches indicates one surface-faulting event, which implies a lengthy recurrence interval for surface faulting on this part of the fault. Organic-rich material from two samples that postdate the last fault movement yielded /sup 14/C ages between 1600 and 1300 yr B.P. These dates are in excellent agreement with the dates obtained from soils buried by the fault-related fan alluvium.

  11. Evaluation of PEGIT duct connection system

    SciTech Connect (OSTI)

    Walker, Iain S.; Brenner, Douglas E.; Sherman, Max H.; Dickerhoff, Darryl J.

    2003-08-01T23:59:59.000Z

    Most air duct system components are assembled in the field and are mechanically fastened by sheet metal screws (for sheet metal-to-sheet metal) or by drawbands (for flex duct-to-sheet metal). Air sealing is separate from this mechanical fastening and is usually achieved using tape or mastic products after mechanical fastening. Field observations have shown that mechanical fastening rarely meets code or manufacturers requirements and that sealing procedures are similarly inconsistent. To address these problems, Proctor Engineering Group (PEG) is developing a system of joining ducts (called PEGIT) that combines the mechanical fastening and sealing into a single self-contained procedure. The PEGIT system uses a shaped flexible seal between specially designed sheet metal duct fittings to both seal and fasten duct sections together. Figure 1 shows the inner duct fitting complete with rubber seal. This seal provides the air seal for the completed fitting and is shaped to allow the inner and outer fittings to slide together, and then to lock the fittings in place. The illustration in Figure 2 shows the approximate cross section of the rubber seal that shows how the seal has a lip that is angled backwards. This angled lip allows the joint to be pushed together by folding flat but then its long axis makes it stiff in the pulling apart direction. This study was undertaken to assist PEG in some of the design aspects of this system and to test the performance of the PEGIT system. This study was carried out in three phases. The initial phase evaluated the performance of a preliminary seal design for the PEGIT system. After the first phase, the seal was redesigned and this new seal was evaluated in the second phase of testing. The third phase performed more detailed testing of the second seal design to optimize the production tolerances of the sheet metal fittings. This report summarizes our findings from the first two phases and provides details about the third phase of testing.

  12. Duct Tape Durability Testing

    SciTech Connect (OSTI)

    Sherman, Max H.; Walker, Iain S.

    2004-04-01T23:59:59.000Z

    Duct leakage is a major source of energy loss in residential buildings. Most duct leakage occurs at the connections to registers, plenums, or branches in the duct system. At each of these connections, a method of sealing the duct system is required. Typical sealing methods include tapes or mastics applied around the joints in the system. Field examinations of duct systems have shown that taped seals tend to fail over extended periods of time. The Lawrence Berkeley National Laboratory (LBNL) has been testing sealant durability for several years using accelerated test methods and found that typical duct tape (i.e., cloth-backed tapes with natural rubber adhesives) fails more rapidly than other duct sealants. This report summarizes the results of duct sealant durability testing over two years for four UL 181B-FX listed duct tapes (two cloth tapes, a foil tape and an Oriented Polypropylene (OPP) tape). One of the cloth tapes was specifically developed in collaboration with a tape manufacturer to perform better in our durability testing. The tests involved the aging of common ''core-to-collar joints'' of flexible duct to sheet metal collars. Periodic air leakage tests and visual inspection were used to document changes in sealant performance. After two years of testing, the flex-to-collar connections showed little change in air leakage, but substantial visual degradation from some products. A surprising experimental result was failure of most of the clamps used to mechanically fasten the connections. This indicates that the durability of clamps also need to be addressed ensure longevity of the duct connection. An accelerated test method developed during this study has been used as the basis for an ASTM standard (E2342-03).

  13. Molten Salt Test Loop (MSTL) system customer interface document.

    SciTech Connect (OSTI)

    Gill, David Dennis; Kolb, William J.; Briggs, Ronald D.

    2013-09-01T23:59:59.000Z

    The National Solar Thermal Test Facility at Sandia National Laboratories has a unique test capability called the Molten Salt Test Loop (MSTL) system. MSTL is a test capability that allows customers and researchers to test components in flowing, molten nitrate salt. The components tested can range from materials samples, to individual components such as flex hoses, ball joints, and valves, up to full solar collecting systems such as central receiver panels, parabolic troughs, or linear Fresnel systems. MSTL provides realistic conditions similar to a portion of a concentrating solar power facility. The facility currently uses 60/40 nitrate %E2%80%9Csolar salt%E2%80%9D and can circulate the salt at pressure up to 40 bar (600psi), temperature to 585%C2%B0C, and flow rate of 44-50kg/s(400-600GPM) depending on temperature. The purpose of this document is to provide a basis for customers to evaluate the applicability to their testing needs, and to provide an outline of expectations for conducting testing on MSTL. The document can serve as the basis for testing agreements including Work for Others (WFO) and Cooperative Research and Development Agreements (CRADA). While this document provides the basis for these agreements and describes some of the requirements for testing using MSTL and on the site at Sandia, the document is not sufficient by itself as a test agreement. The document, however, does provide customers with a uniform set of information to begin the test planning process.

  14. Michigan E85 Infrastructure

    SciTech Connect (OSTI)

    Sandstrom, Matthew M.

    2012-03-30T23:59:59.000Z

    This is the final report for a grant-funded project to financially assist and otherwise provide support to projects that increase E85 infrastructure in Michigan at retail fueling locations. Over the two-year project timeframe, nine E85 and/or flex-fuel pumps were installed around the State of Michigan at locations currently lacking E85 infrastructure. A total of five stations installed the nine pumps, all providing cost share toward the project. By using cost sharing by station partners, the $200,000 provided by the Department of Energy facilitated a total project worth $746,332.85. This project was completed over a two-year timetable (eight quarters). The first quarter of the project focused on project outreach to station owners about the incentive on the installation and/or conversion of E85 compatible fueling equipment including fueling pumps, tanks, and all necessary electrical and plumbing connections. Utilizing Clean Energy Coalition (CEC) extensive knowledge of gasoline/ethanol infrastructure throughout Michigan, CEC strategically placed these pumps in locations to strengthen the broad availability of E85 in Michigan. During the first and second quarters, CEC staff approved projects for funding and secured contracts with station owners; the second through eighth quarters were spent working with fueling station owners to complete projects; the third through eighth quarters included time spent promoting projects; and beginning in the second quarter and running for the duration of the project was spent performing project reporting and evaluation to the US DOE. A total of 9 pumps were installed (four in Elkton, two in Sebewaing, one in East Lansing, one in Howell, and one in Whitmore Lake). At these combined station locations, a total of 192,445 gallons of E85, 10,786 gallons of E50, and 19,159 gallons of E30 were sold in all reporting quarters for 2011. Overall, the project has successfully displaced 162,611 gallons (2,663 barrels) of petroleum, and reduced regional GHG emissions by 375 tons in the first year of station deployment.

  15. Appendix E: Other NEMS-MP results for the base case and scenarios.

    SciTech Connect (OSTI)

    Plotkin, S. E.; Singh, M. K.; Energy Systems

    2009-12-03T23:59:59.000Z

    The NEMS-MP model generates numerous results for each run of a scenario. (This model is the integrated National Energy Modeling System [NEMS] version used for the Multi-Path Transportation Futures Study [MP].) This appendix examines additional findings beyond the primary results reported in the Multi-Path Transportation Futures Study: Vehicle Characterization and Scenario Analyses (Reference 1). These additional results are provided in order to help further illuminate some of the primary results. Specifically discussed in this appendix are: (1) Energy use results for light vehicles (LVs), including details about the underlying total vehicle miles traveled (VMT), the average vehicle fuel economy, and the volumes of the different fuels used; (2) Resource fuels and their use in the production of ethanol, hydrogen (H{sub 2}), and electricity; (3) Ethanol use in the scenarios (i.e., the ethanol consumption in E85 vs. other blends, the percent of travel by flex fuel vehicles on E85, etc.); (4) Relative availability of E85 and H2 stations; (5) Fuel prices; (6) Vehicle prices; and (7) Consumer savings. These results are discussed as follows: (1) The three scenarios (Mixed, (P)HEV & Ethanol, and H2 Success) when assuming vehicle prices developed through literature review; (2) The three scenarios with vehicle prices that incorporate the achievement of the U.S. Department of Energy (DOE) program vehicle cost goals; (3) The three scenarios with 'literature review' vehicle prices, plus vehicle subsidies; and (4) The three scenarios with 'program goals' vehicle prices, plus vehicle subsidies. The four versions or cases of each scenario are referred to as: Literature Review No Subsidies, Program Goals No Subsidies, Literature Review with Subsidies, and Program Goals with Subsidies. Two additional points must be made here. First, none of the results presented for LVs in this section include Class 2B trucks. Results for this class are included occasionally in Reference 1. They represent a small, though noticeable, segment of the 'LV plus 2B' market (e.g., a little more than 3% of today's energy use in that market). We generally do not include them in this discussion, simply because it requires additional effort to combine the NEMS-MP results for them with the results for the other LVs. (Where there is an exception, we will indicate so.) Second, where reference is made to E85, the ethanol content is actually 74%. The Energy Information Administration (EIA) assumes that, to address cold-starting issues, the percent of ethanol in E85 will vary seasonally. The EIA uses an annual average ethanol content of 74% in its forecasts. That assumption is maintained in the NEMS-MP scenario runs.

  16. Development of Production-Intent Plug-In Hybrid Vehicle Using Advanced Lithium-Ion Battery Packs with Deployment to a Demonstration Fleet

    SciTech Connect (OSTI)

    No, author

    2013-09-29T23:59:59.000Z

    The primary goal of this project was to speed the development of one of the first commercially available, OEM-produced plug-in hybrid electric vehicles (PHEV). The performance of the PHEV was expected to double the fuel economy of the conventional hybrid version. This vehicle program incorporated a number of advanced technologies, including advanced lithium-ion battery packs and an E85-capable flex-fuel engine. The project developed, fully integrated, and validated plug-in specific systems and controls by using GM’s Global Vehicle Development Process (GVDP) for production vehicles. Engineering Development related activities included the build of mule vehicles and integration vehicles for Phases I & II of the project. Performance data for these vehicles was shared with the U.S. Department of Energy (DOE). The deployment of many of these vehicles was restricted to internal use at GM sites or restricted to assigned GM drivers. Phase III of the project captured the first half or Alpha phase of the Engineering tasks for the development of a new thermal management design for a second generation battery module. The project spanned five years. It included six on-site technical reviews with representatives from the DOE. One unique aspect of the GM/DOE collaborative project was the involvement of the DOE throughout the OEM vehicle development process. The DOE gained an understanding of how an OEM develops vehicle efficiency and FE performance, while balancing many other vehicle performance attributes to provide customers well balanced and fuel efficient vehicles that are exciting to drive. Many vehicle content and performance trade-offs were encountered throughout the vehicle development process to achieve product cost and performance targets for both the OEM and end customer. The project team completed two sets of PHEV development vehicles with fully integrated PHEV systems. Over 50 development vehicles were built and operated for over 180,000 development miles. The team also completed four GM engineering development Buy-Off rides/milestones. The project included numerous engineering vehicle and systems development trips including extreme hot, cold and altitude exposure. The final fuel economy performance demonstrated met the objectives of the PHEV collaborative GM/DOE project. Charge depletion fuel economy of twice that of the non-PHEV model was demonstrated. The project team also designed, developed and tested a high voltage battery module concept that appears to be feasible from a manufacturability, cost and performance standpoint. The project provided important product development and knowledge as well as technological learnings and advancements that include multiple U.S. patent applications.

  17. NMOG Emissions Characterization and Estimation for Vehicles Using Ethanol-Blended Fuels

    SciTech Connect (OSTI)

    Sluder, Scott [ORNL; West, Brian H [ORNL

    2012-01-01T23:59:59.000Z

    Ethanol is a biofuel commonly used in gasoline blends to displace petroleum consumption; its utilization is on the rise in the United States, spurred by the biofuel utilization mandates put in place by the Energy Independence and Security Act of 2007 (EISA). The United States Environmental Protection Agency (EPA) has the statutory responsibility to implement the EISA mandates through the promulgation of the Renewable Fuel Standard. EPA has historically mandated an emissions certification fuel specification that calls for ethanol-free fuel, except for the certification of flex-fuel vehicles. However, since the U.S. gasoline marketplace is now virtually saturated with E10, some organizations have suggested that inclusion of ethanol in emissions certification fuels would be appropriate. The test methodologies and calculations contained in the Code of Federal Regulations for gasoline-fueled vehicles have been developed with the presumption that the certification fuel does not contain ethanol; thus, a number of technical issues would require resolution before such a change could be accomplished. This report makes use of the considerable data gathered during the mid-level blends testing program to investigate one such issue: estimation of non-methane organic gas (NMOG) emissions. The data reported in this paper were gathered from over 600 cold-start Federal Test Procedure (FTP) tests conducted on 68 vehicles representing 21 models from model year 2000 to 2009. Most of the vehicles were certified to the Tier-2 emissions standard, but several older Tier-1 and national low emissions vehicle program (NLEV) vehicles were also included in the study. Exhaust speciation shows that ethanol, acetaldehyde, and formaldehyde dominate the oxygenated species emissions when ethanol is blended into the test fuel. A set of correlations were developed that are derived from the measured non-methane hydrocarbon (NMHC) emissions and the ethanol blend level in the fuel. These correlations were applied to the measured NMHC emissions from the mid-level ethanol blends testing program and the results compared against the measured NMOG emissions. The results show that the composite FTP NMOG emissions estimate has an error of 0.0015 g/mile {+-}0.0074 for 95% of the test results. Estimates for the individual phases of the FTP are also presented with similar error levels. A limited number of tests conducted using the LA92, US06, and highway fuel economy test cycles show that the FTP correlation also holds reasonably well for these cycles, though the error level relative to the measured NMOG value increases for NMOG emissions less than 0.010 g/mile.

  18. The Impact of Low Octane Hydrocarbon Blending Streams on Ethanol Engine Optimization

    SciTech Connect (OSTI)

    Szybist, James P [ORNL] [ORNL; West, Brian H [ORNL] [ORNL

    2013-01-01T23:59:59.000Z

    Ethanol is a very attractive fuel from an end-use perspective because it has a high chemical octane number and a high latent heat of vaporization. When an engine is optimized to take advantage of these fuel properties, both efficiency and power can be increased through higher compression ratio, direct fuel injection, higher levels of boost, and a reduced need for enrichment to mitigate knock or protect the engine and aftertreatment system from overheating. The ASTM D5798 specification for high level ethanol blends, commonly called E85, underwent a major revision in 2011. The minimum ethanol content was revised downward from 68 vol% to 51 vol%, which combined with the use of low octane blending streams such as natural gasoline introduces the possibility of a lower octane E85 fuel. While this fuel is suitable for current ethanol tolerant flex fuel vehicles, this study experimentally examines whether engines can still be aggressively optimized for the resultant fuel from the revised ASTM D5798 specification. The performance of six ethanol fuel blends, ranging from 51-85% ethanol, is compared to a premium-grade certification gasoline (UTG-96) in a single-cylinder direct-injection (DI) engine with a compression ratio of 12.9:1 at knock-prone engine conditions. UTG-96 (RON = 96.1), light straight run gasoline (RON = 63.6), and n-heptane (RON = 0) are used as the hydrocarbon blending streams for the ethanol-containing fuels in an effort to establish a broad range of knock resistance for high ethanol fuels. Results show that nearly all ethanol-containing fuels are more resistant to engine knock than UTG-96 (the only exception being the ethanol blend with 49% n-heptane). This knock resistance allows ethanol blends made with 33 and 49% light straight run gasoline, and 33% n-heptane to be operated at significantly more advanced combustion phasing for higher efficiency, as well as at higher engine loads. While experimental results show that the octane number of the hydrocarbon blend stock does impact engine performance, there remains a significant opportunity for engine optimization when considering even the lowest octane fuels that are in compliance with the current revision of ASTM D5798 compared to premium-grade gasoline.

  19. NMOG Emissions Characterizations and Estimation for Vehicles Using Ethanol-Blended Fuels

    SciTech Connect (OSTI)

    Sluder, Scott [ORNL; West, Brian H [ORNL

    2011-10-01T23:59:59.000Z

    Ethanol is a biofuel commonly used in gasoline blends to displace petroleum consumption; its utilization is on the rise in the United States, spurred by the biofuel utilization mandates put in place by the Energy Independence and Security Act of 2007 (EISA). The United States Environmental Protection Agency (EPA) has the statutory responsibility to implement the EISA mandates through the promulgation of the Renewable Fuel Standard. EPA has historically mandated an emissions certification fuel specification that calls for ethanol-free fuel, except for the certification of flex-fuel vehicles. However, since the U.S. gasoline marketplace is now virtually saturated with E10, some organizations have suggested that inclusion of ethanol in emissions certification fuels would be appropriate. The test methodologies and calculations contained in the Code of Federal Regulations for gasoline-fueled vehicles have been developed with the presumption that the certification fuel does not contain ethanol; thus, a number of technical issues would require resolution before such a change could be accomplished. This report makes use of the considerable data gathered during the mid-level blends testing program to investigate one such issue: estimation of non-methane organic gas (NMOG) emissions. The data reported in this paper were gathered from over 600 cold-start Federal Test Procedure (FTP) tests conducted on 68 vehicles representing 21 models from model year 2000 to 2009. Most of the vehicles were certified to the Tier-2 emissions standard, but several older Tier-1 and national low emissions vehicle program (NLEV) vehicles were also included in the study. Exhaust speciation shows that ethanol, acetaldehyde, and formaldehyde dominate the oxygenated species emissions when ethanol is blended into the test fuel. A set of correlations were developed that are derived from the measured non-methane hydrocarbon (NMHC) emissions and the ethanol blend level in the fuel. These correlations were applied to the measured NMHC emissions from the mid-level ethanol blends testing program and the results compared against the measured NMOG emissions. The results show that the composite FTP NMOG emissions estimate has an error of 0.0015 g/mile {+-}0.0074 for 95% of the test results. Estimates for the individual phases of the FTP are also presented with similar error levels. A limited number of tests conducted using the LA92, US06, and highway fuel economy test cycles show that the FTP correlation also holds reasonably well for these cycles, though the error level relative to the measured NMOG value increases for NMOG emissions less than 0.010 g/mile.

  20. Report of Official Foreign Travel to Germany, May 16-June 1, 2001

    SciTech Connect (OSTI)

    J. D. Mason

    2001-06-18T23:59:59.000Z

    The Department of Energy (DOE) and associated agencies have moved rapidly toward electronic production, management, and dissemination of scientific and technical information. The World-Wide Web (WWW) has become a primary means of information dissemination. Electronic commerce (EC) is becoming the preferred means of procurement. DOE, like other government agencies, depends on and encourages the use of international standards in data communications. Like most government agencies, DOE has expressed a preference for openly developed standards over proprietary designs promoted as ''standards'' by vendors. In particular, there is a preference for standards developed by organizations such as the International Organization for Standardization (ISO) and the American National Standards Institute (ANSI) that use open, public processes to develop their standards. Among the most widely adopted international standards is the Standard Generalized Markup Language (SGML, ISO 8879:1986, FIPS 152), to which DOE long ago made a commitment. Besides the official commitment, which has resulted in several specialized projects, DOE makes heavy use of coding derived from SGML: Most documents on the WWW are coded in HTML (Hypertext Markup Language), which is an application of SGML. The World-Wide Web Consortium (W3C), with the backing of major software houses like Adobe, IBM, Microsoft, Netscape, Oracle, and Sun, is promoting XML (eXtensible Markup Language), a class of SGML applications, for the future of the WWW and the basis for EC. In support of DOE's use of these standards, I have served since 1985 as Chairman of the international committee responsible for SGML and related standards, ISO/IEC JTC1/SC34 (SC34) and its predecessor organizations. During my May 2001 trip, I chaired the spring 2001 meeting of SC34 in Berlin, Germany. I also attended XML Europe 2001, a major conference on the use of SGML and XML sponsored by the Graphic Communications Association (GCA), and chaired a meeting of the International SGML/XML Users' Group (ISUG). In addition to the widespread use of the WWW among DOE's plants and facilities in Oak Ridge and among DOE sites across the nation, there have been several past and present SGML- and XML-based projects at the Y-12 National Security Complex (Y-12). Our local project team has done SGML and XML development at Y-12 and Oak Ridge National Laboratory (ORNL) since the late 1980s. SGML is a component of the Weapons Records Archiving and Preservation (WRAP) project at Y-12 and is the format for catalog metadata chosen for weapons records by the Nuclear Weapons Information Group (NWIG). The ''Ferret'' system for automated classification analysis uses XML to structure its knowledge base. The Ferret team also provides XML consulting to OSTI and DOE Headquarters, particularly the National Nuclear Security Administration (NNSA). Supporting standards development allows DOE and Y-12 the opportunity both to provide input into the process and to benefit from contact with some of the leading experts in the subject matter. Oak Ridge has been for some years the location to which other DOE sites turn for expertise in SGML, XML, and related topics.

  1. QER- Comment of Brian West

    Broader source: Energy.gov [DOE]

    Hello, Thanks for the invitation to the QER workshop. Here are a couple of comments that I was probably unable to fully articulate in the main session, although I did try to make some of these points in the breakout session: When considering alternatives and policy that drives alternative fuel use, it is important to learn from Policy successes and failures. Policy drivers put in place in Thailand, Brazil, and Sweden have been successful in transitions to greater alternative fuel use. US policy for Flex Fuel Vehicles has been largely unsuccessful at encouraging alternative fuel use. The fuel economy credit for the OEMs to build FFVs was generous but encouraged only modest production; nonetheless there are over 15M FFVs on the road. However, they use very little ethanol fuel due to cost ($/mile), range, etc. Natural Gas has a very real value proposition (lower $/gge) so fleet owners have good financial incentive to make the switch, even if investments are required. One participant commented that infrastructure costs are small compared to costs of imported oil. I agree with this statement. One presenter mentioned (a city?) with a law that requires infrastructure to support future EV charging be installed in any new parking garage. Great idea. (Better to have and not need than need and not have, especially when cost differential is small on the front end and very large on the back end). In the US we install about 20,000-40,000 new fuel dispensers per year (according to Gilbarco/Wayne). It would be a horrible missed opportunity to not put policy in place that encourages/requires E25 or E85-compatible dispensers. With a successful policy driver, in the next five years the nation could have over 100,000 ethanol-compatible dispensers in place, ready for a new High Octane Fuel (that could very likely contain more than 10 or 15% ethanol). Thanks Brian H. West Fuels, Engines, and Emissions Research Center Oak Ridge National Laboratory http://www.ornl.gov/ http://feerc.ornl.gov/ http://www.fueleconomy.gov/ From: Tillemann, Levi Sent: Thursday, July 03, 2014 3:52 PM To: West, Brian H. Subject: AMR/QER Technical Workshop Dear Brian: On behalf of the Department of Energy's Office of Energy Policy and Systems Analysis (EPSA) I want to thank you for your participation at the June 20th AMR/QER Alternative Transportation Refueling Infrastructure technical workshop. Your contribution in the breakout sessions and general discussion sessions provided valuable insight that will help inform EPSA during the QER process going forward. During the course of the workshop, detailed notes were taken. These have been anonymized and will be made publically available to you and the general public in the coming weeks. Once they are posted, we will provide you with a link for accessing them online. We encourage you to submit additional comments regarding infrastructure for transmission, storage or distribution of alternative transportation fuels to qercomments@hq.doe.gov. For more information about the QER's stakeholder meeting locations, areas of analysis and public comments you can visit the QER website at: http://energy.gov/epsa/initiatives/quadrennial-energy-review-qer. Please feel free to contact me or Sallie Gilbert (sallie.gilbert@hq.doe.gov) if you have additional questions. I will be leaving the DOE August 1, thereafter you may contact Renee Picket (adonica.pickett@hq.doe.gov) or Carla Frisch (carla.frisch@hq.doe.gov) with questions or comments. Thank you again for making the workshop a great success. I look forward to working together with all of you on these issues in the future. Best regards, Levi Tillemann, Ph.D. Special Advisor, EPSA US Department of Energy

  2. Analysis of Benefits of an Energy Imbalance Market in the NWPP

    SciTech Connect (OSTI)

    Samaan, Nader A.; Bayless, Rich; Symonds, Mark; Nguyen, Tony B.; Jin, Chunlian; Wu, Di; Diao, Ruisheng; Makarov, Yuri V.; Kannberg, Landis D.; Guo, Tao; Dennison-Leonard , Sarah; Goodenough, Mike; Schellberg, Ron; Conger, Sid; Harris, Kevin; Rarity, Matt; Wallace, Steven; Austin, Jamie; Noteboom, Rod; Van Blaricom , Tim; McRunnel, Kim; Apperson, John; Empey, Marshall; Etingov, Pavel V.; Warady, Debra; Brush, Ray; Newkirk, Joshua; Williams, Peter; Landauer, Marv; Owen, Hugh; Morter, Wayne; Haraguchi, Keli; Portouw, Jim; Downey, kathryn; Sorey, Steve; Williams, Stan; Gossa, Teyent; Kalich, Clint; Damiano, Patrick; Macarthur, Clay; Martin, Tom; Hoerner, Joe; Knudsen, Steve; Johnson, Anders; Link, Rick; Holcomb, Dennis

    2013-10-18T23:59:59.000Z

    The Northwest Power Pool (NWPP) Market Assessment Committee (MC) Initiative, which was officially launched on March 19, 2012, set out to explore a range of alternatives that could help the Balancing Authorities and scheduling utilities in the NWPP area address growing operational and commercial challenges affecting the regional power system. The MC formed an Analytical Team with technical representatives from each of the member Balancing Areas in the NWPP and with staff of Pacific Northwest National Laboratory (PNNL). This Analytical Team was instructed to conduct extensive studies of intra-hour operation of the NWPP system in the year 2020 and of the NWPP region with 14,671 MW of wind penetration. The effort utilized a sub-hourly production cost model (the PLEXOS® computer model) that inputs data from the Western Electricity Coordinating Council (WECC)-wide Production Cost Model (PCM) to evaluate potential production cost savings. The Analytical Team was given two general options to evaluate: •Energy Imbalance Market (EIM): establishment of an automated, organized NWPP area market for economically supplying energy imbalance within the hour. •Enhanced Market-Operational Tools (EMT) that might augment or replace an EIM. The Analytical The Analytical Team built on the WECC-wide PCM data from prior work done in the WECC and carried forward the evolution of the original WECC Transmission Expansion Planning Policy Committee (TEPPC) 2020 PC0 data base. A large number of modifications and improvements were made to this case and the data were subjected to extensive review by the team members to improve the model representation of the Northwest (NW). MC meetings that were open to the public were held for interested parties to review and provide input to the study. Results for the test, base, and sensitivity case studies performed by the MC Initiative Analytical Team indicate that there are a wide range of benefits that could be obtained from the operation of an EIM in the NWPP depending on what assumptions are made. The instructions from the MC were to determine a "minimum high confidence" range of potential benefits. The results for the Base Case indicate that the EIM benefits ranged from approximately $40 million to $70 million in annual savings from the operation of an EIM in the NWPP footprint. A number of additional relevant sensitivity cases were performed, including low and high water conditions, low and high natural gas prices, and various flex reserve requirements, resource operations, and amounts of resource capability held back during the preschedule period. Along with the results for the Base Case, the results for these studies yielded EIM benefits that clustered within the range of $70 to $80 million dollars per year with potential benefits ranging from approximately $125 million to as little as $17 million per year. Because the design and operation of an EIM could enable participating Balancing Authorities (BAs) to collectively lower the quantity of resources they must carry to meet within-hour balancing needs, a sensitivity case was also performed to analyze the impact that such reductions might have on the benefits from an EIM. The results for this sensitivity case indicate that such reductions could increase the benefits from the operation of an EIM in the NWPP into the range of approximately $130 million to $160 million per year. Also, a sensitivity case for a WECC-wide EIM was performed with the results indicating that the potential benefits to the NWPP could increase into the range of $197 million to $233 million per year. While there may be potential reliability benefits from the coordinated dispatch process underlying the operation of an EIM, reliability benefits from an EIM were out of the scope of this study. The EIM benefit analyses that were performed by the Analytical Team are provided in this report.

  3. Pre-Combustion Carbon Capture by a Nanoporous, Superhydrophobic Membrane Contactor Process

    SciTech Connect (OSTI)

    Howard Meyer; S.James Zhou; Yong Ding; Ben Bikson

    2012-03-31T23:59:59.000Z

    This report summarizes progress made during Phase I and Phase II of the project: "Pre-Combustion Carbon Capture by a Nanoporous, Superhydrophobic Membrane Contactor Process," under contract DE-FE-0000646. The objective of this project is to develop a practical and cost effective technology for CO{sub 2} separation and capture for pre-combustion coal-based gasification plants using a membrane contactor/solvent absorption process. The goals of this technology development project are to separate and capture at least 90% of the CO{sub 2} from Integrated Gasification Combined Cycle (IGCC) power plants with less than 10% increase in the cost of energy services. Unlike conventional gas separation membranes, the membrane contactor is a novel gas separation process based on the gas/liquid membrane concept. The membrane contactor is an advanced mass transfer device that operates with liquid on one side of the membrane and gas on the other. The membrane contactor can operate with pressures that are almost the same on both sides of the membrane, whereas the gas separation membranes use the differential pressure across the membrane as driving force for separation. The driving force for separation for the membrane contactor process is the chemical potential difference of CO{sub 2} in the gas phase and in the absorption liquid. This process is thus easily tailored to suit the needs for pre-combustion separation and capture of CO{sub 2}. Gas Technology Institute (GTI) and PoroGen Corporation (PGC) have developed a novel hollow fiber membrane technology that is based on chemically and thermally resistant commercial engineered polymer poly(ether ether ketone) or PEEK. The PEEK membrane material used in the membrane contactor during this technology development program is a high temperature engineered plastic that is virtually non-destructible under the operating conditions encountered in typical gas absorption applications. It can withstand contact with most of the common treating solvents. GTI and PGC have developed a nanoporous and superhydrophobic PEEK-based hollow fiber membrane contactor tailored for the membrane contactor/solvent absorption application for syngas cleanup. The membrane contactor modules were scaled up to 8-inch diameter commercial size modules. We have performing extensive laboratory and bench testing using pure gases, simulated water-gas-shifted (WGS) syngas stream, and a slipstream from a gasification derived syngas from GTI�s Flex-Fuel Test Facility (FFTF) gasification plant under commercially relevant conditions. The team have also carried out an engineering and economic analysis of the membrane contactor process to evaluate the economics of this technology and its commercial potential. Our test results have shown that 90% CO{sub 2} capture can be achieved with several physical solvents such as water and chilled methanol. The rate of CO{sub 2} removal by the membrane contactor is in the range of 1.5 to 2.0 kg/m{sup 2}/hr depending on the operating pressures and temperatures and depending on the solvents used. The final economic analysis has shown that the membrane contactor process will cause the cost of electricity to increase by 21% from the base plant without CO{sub 2} capture. The goal of 10% increase in levelized cost of electricity (LCOE) from base DOE Case 1(base plant without capture) is not achieved by using the membrane contactor. However, the 21% increase in LCOE is a substantial improvement as compared with the 31.6% increase in LCOE as in DOE Case 2(state of art capture technology using 2-stages of Selexol{TM}).

  4. Sensor Network Demonstration for In Situ Decommissioning - 13332

    SciTech Connect (OSTI)

    Lagos, L.; Varona, J.; Awwad, A. [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States)] [Applied Research Center, Florida International University, 10555 West Flagler Street, Suite 2100, Miami, FL 33174 (United States); Rivera, J.; McGill, J. [Department of Energy - DOE, Environmental Management Office (United States)] [Department of Energy - DOE, Environmental Management Office (United States)

    2013-07-01T23:59:59.000Z

    Florida International University's (FIU's) Applied Research Center is currently supporting the Department of Energy's (DOE) Environmental Management Office of D and D and Facility Engineering program. FIU is supporting DOE's initiative to improve safety, reduce technical risks, and limit uncertainty within D and D operations by identifying technologies suitable to meet specific facility D and D requirements, assessing the readiness of those technologies for field deployment, and conducting feasibility studies and large scale demonstrations of promising technologies. During FY11, FIU collaborated with Savannah River National Laboratory in the development of an experimental test site for the demonstration of multiple sensor systems for potential use in the in situ decommissioning process. In situ decommissioning is a process in which the above ground portion of a facility is dismantled and removed, and the underground portion is filled with a cementious material such as grout. In such a scenario, the question remains on how to effectively monitor the structural health of the grout (cracking, flexing, and sinking), as well as track possible migration of contaminants within and out of the grouted monolith. The right types of sensors can aid personnel in better understanding the conditions within the entombed structure. Without sensors embedded in and around the monolith, it will be very difficult to estimate structural integrity and contaminant transport. Yet, to fully utilize the appropriate sensors and the provided data, their performance and reliability must be evaluated outside a laboratory setting. To this end, a large scale experimental setup and demonstration was conducted at FIU. In order to evaluate a large suite of sensor systems, FIU personnel designed and purchased a pre-cast concrete open-top cube, which served as a mock-up of an in situ DOE decommissioned facility. The inside of the cube measures 10 ft x 10 ft x 8 ft. In order to ensure that the individual sensors would be immobilized during the grout pouring activities, a set of nine sensor racks were designed. The 270 sensors provided by Idaho National Laboratory (INL), Mississippi State University (MSU), University of Houston (UH), and University of South Carolina (USC) were secured to these racks based on predetermined locations. Once sensor racks were installed inside the test cube, connected and debugged, approximately 32 cubic yards of special grout material was used to entomb the sensors. MSU provided and demonstrated four types of fiber loop ring-down (FLR) sensors for detection of water, temperature, cracks, and movement of fluids. INL provided and demonstrated time differenced 3D electrical resistivity tomography (ERT), advanced tensiometers for moisture content, and thermocouples for temperature measurements. University of Houston provided smart aggregate (SA) sensors, which detect crack severity and water presence. An additional UH sensor system demonstrated was a Fiber Bragg Grating (FBG) fiber optic system measuring strain, presence of water, and temperature. USC provided a system which measured acoustic emissions during cracking, as well as temperature and pH sensors. All systems were connected to a Sensor Remote Access System (SRAS) data networking and collection system designed, developed and provided by FIU. The purpose of SRAS was to collect and allow download of the raw sensor data from all the sensor system, as well as allow upload of the processed data and any analysis reports and graphs. All this information was made available to the research teams via the Deactivation and Decommissioning Knowledge Management and Information Tool (D and D KM-IT). As a current research effort, FIU is performing an energy analysis, and transferring several sensor systems to a Photovoltaic (PV) System to continuously monitor energy consumption parameters and overall power demands. Also, One final component of this research is focusing on developing an integrated data network to capture, log and analyze sensor system data in near real time from a single inte

  5. Oilfield Flare Gas Electricity Systems (OFFGASES Project)

    SciTech Connect (OSTI)

    Rachel Henderson; Robert Fickes

    2007-12-31T23:59:59.000Z

    The Oilfield Flare Gas Electricity Systems (OFFGASES) project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under Preferred Upstream Management Projects (PUMP III). Project partners included the Interstate Oil and Gas Compact Commission (IOGCC) as lead agency working with the California Energy Commission (CEC) and the California Oil Producers Electric Cooperative (COPE). The project was designed to demonstrate that the entire range of oilfield 'stranded gases' (gas production that can not be delivered to a commercial market because it is poor quality, or the quantity is too small to be economically sold, or there are no pipeline facilities to transport it to market) can be cost-effectively harnessed to make electricity. The utilization of existing, proven distribution generation (DG) technologies to generate electricity was field-tested successfully at four marginal well sites, selected to cover a variety of potential scenarios: high Btu, medium Btu, ultra-low Btu gas, as well as a 'harsh', or high contaminant, gas. Two of the four sites for the OFFGASES project were idle wells that were shut in because of a lack of viable solutions for the stranded noncommercial gas that they produced. Converting stranded gas to useable electrical energy eliminates a waste stream that has potential negative environmental impacts to the oil production operation. The electricity produced will offset that which normally would be purchased from an electric utility, potentially lowering operating costs and extending the economic life of the oil wells. Of the piloted sites, the most promising technologies to handle the range were microturbines that have very low emissions. One recently developed product, the Flex-Microturbine, has the potential to handle the entire range of oilfield gases. It is deployed at an oilfield near Santa Barbara to run on waste gas that is only 4% the strength of natural gas. The cost of producing oil is to a large extent the cost of electric power used to extract and deliver the oil. Researchers have identified stranded and flared gas in California that could generate 400 megawatts of power, and believe that there is at least an additional 2,000 megawatts that have not been identified. Since California accounts for about 14.5% of the total domestic oil production, it is reasonable to assume that about 16,500 megawatts could be generated throughout the United States. This power could restore the cost-effectiveness of thousands of oil wells, increasing oil production by millions of barrels a year, while reducing emissions and greenhouse gas emissions by burning the gas in clean distributed generators rather than flaring or venting the stranded gases. Most turbines and engines are designed for standardized, high-quality gas. However, emerging technologies such as microturbines have increased the options for a broader range of fuels. By demonstrating practical means to consume the four gas streams, the project showed that any gases whose properties are between the extreme conditions also could be utilized. The economics of doing so depends on factors such as the value of additional oil recovered, the price of electricity produced, and the alternate costs to dispose of stranded gas.

  6. Transportation Energy Pathways LDRD.

    SciTech Connect (OSTI)

    Barter, Garrett; Reichmuth, David; Westbrook, Jessica; Malczynski, Leonard A. [Sandia National Laboratories, Albuquerque, NM; Yoshimura, Ann S.; Peterson, Meghan; West, Todd H.; Manley, Dawn Kataoka; Guzman, Katherine Dunphy; Edwards, Donna M.; Hines, Valerie Ann-Peters

    2012-09-01T23:59:59.000Z

    This report presents a system dynamics based model of the supply-demand interactions between the USlight-duty vehicle (LDV) fleet, its fuels, and the corresponding primary energy sources through the year2050. An important capability of our model is the ability to conduct parametric analyses. Others have reliedupon scenario-based analysis, where one discrete set of values is assigned to the input variables and used togenerate one possible realization of the future. While these scenarios can be illustrative of dominant trendsand tradeoffs under certain circumstances, changes in input values or assumptions can have a significantimpact on results, especially when output metrics are associated with projections far into the future. Thistype of uncertainty can be addressed by using a parametric study to examine a range of values for the inputvariables, offering a richer source of data to an analyst.The parametric analysis featured here focuses on a trade space exploration, with emphasis on factors thatinfluence the adoption rates of electric vehicles (EVs), the reduction of GHG emissions, and the reduction ofpetroleum consumption within the US LDV fleet. The underlying model emphasizes competition between13 different types of powertrains, including conventional internal combustion engine (ICE) vehicles, flex-fuel vehicles (FFVs), conventional hybrids(HEVs), plug-in hybrids (PHEVs), and battery electric vehicles(BEVs).We find that many factors contribute to the adoption rates of EVs. These include the pace of technologicaldevelopment for the electric powertrain, battery performance, as well as the efficiency improvements inconventional vehicles. Policy initiatives can also have a dramatic impact on the degree of EV adoption. Theconsumer effective payback period, in particular, can significantly increase the market penetration rates ifextended towards the vehicle lifetime.Widespread EV adoption can have noticeable impact on petroleum consumption and greenhouse gas(GHG) emission by the LDV fleet. However, EVs alone cannot drive compliance with the most aggressiveGHG emission reduction targets, even as the current electricity source mix shifts away from coal and towardsnatural gas. Since ICEs will comprise the majority of the LDV fleet for up to forty years, conventional vehicleefficiency improvements have the greatest potential for reductions in LDV GHG emissions over this time.These findings seem robust even if global oil prices rise to two to three times current projections. Thus,investment in improving the internal combustion engine might be the cheapest, lowest risk avenue towardsmeeting ambitious GHG emission and petroleum consumption reduction targets out to 2050.3 AcknowledgmentThe authors would like to thank Dr. Andrew Lutz, Dr. Benjamin Wu, Prof. Joan Ogden and Dr. ChristopherYang for their suggestions over the course of this project. This work was funded by the Laboratory DirectedResearch and Development program at Sandia National Laboratories.4

  7. Biomass Gasification Research Facility Final Report

    SciTech Connect (OSTI)

    Snyder, Todd R.; Bush, Vann; Felix, Larry G.; Farthing, William E.; Irvin, James H.

    2007-09-30T23:59:59.000Z

    While thermochemical syngas production facilities for biomass utilization are already employed worldwide, exploitation of their potential has been inhibited by technical limitations encountered when attempting to obtain real-time syngas compositional data required for process optimization, reliability, and syngas quality assurance. To address these limitations, the Gas Technology Institute (GTI) carried out two companion projects (under US DOE Cooperative Agreements DE-FC36-02GO12024 and DE-FC36-03GO13175) to develop and demonstrate the equipment and methods required to reliably and continuously obtain accurate and representative on-line syngas compositional data. These objectives were proven through a stepwise series of field tests of biomass and coal gasification process streams. GTI developed the methods and hardware for extractive syngas sample stream delivery and distribution, necessary to make use of state-of-the-art on-line analyzers to evaluate and optimize syngas cleanup and conditioning. The primary objectives of Cooperative Agreement DE-FC36-02GO12024 were the selection, acquisition, and application of a suite of gas analyzers capable of providing near real-time gas analyses to suitably conditioned syngas streams. A review was conducted of sampling options, available analysis technologies, and commercially available analyzers, that could be successfully applied to the challenging task of on-line syngas characterization. The majority of thermochemical process streams comprise multicomponent gas mixtures that, prior to crucial, sequential cleanup procedures, include high concentrations of condensable species, multiple contaminants, and are often produced at high temperatures and pressures. Consequently, GTI engaged in a concurrent effort under Cooperative Agreement DE-FC36-03GO13175 to develop the means to deliver suitably prepared, continuous streams of extracted syngas to a variety of on-line gas analyzers. The review of candidate analysis technology also addressed safety concerns associated with thermochemical process operation that constrain the location and configuration of potential gas analysis equipment. Initial analyzer costs, reliability, accuracy, and operating and maintenance costs were also considered prior to the assembly of suitable analyzers for this work. Initial tests at GTI’s Flex-Fuel Test Facility (FFTF) in late 2004 and early 2005 successfully demonstrated the transport and subsequent analysis of a single depressurized, heat-traced syngas stream to a single analyzer (an Industrial Machine and Control Corporation (IMACC) Fourier-transform infrared spectrometer (FT-IR)) provided by GTI. In March 2005, our sampling approach was significantly expanded when this project participated in the U.S. DOE’s Novel Gas Cleaning (NGC) project. Syngas sample streams from three process locations were transported to a distribution manifold for selectable analysis by the IMACC FT-IR, a Stanford Research Systems QMS300 Mass Spectrometer (SRS MS) obtained under this Cooperative Agreement, and a Varian micro gas chromatograph with thermal conductivity detector (?GC) provided by GTI. A syngas stream from a fourth process location was transported to an Agilent Model 5890 Series II gas chromatograph for highly sensitive gas analyses. The on-line analyses made possible by this sampling system verified the syngas cleaning achieved by the NGC process. In June 2005, GTI collaborated with Weyerhaeuser to characterize the ChemrecTM black liquor gasifier at Weyerhaeuser’s New Bern, North Carolina pulp mill. Over a ten-day period, a broad range of process operating conditions were characterized with the IMACC FT-IR, the SRS MS, the Varian ?GC, and an integrated Gas Chromatograph, Mass Selective Detector, Flame Ionization Detector and Sulfur Chemiluminescence Detector (GC/MSD/FID/SCD) system acquired under this Cooperative Agreement from Wasson-ECE. In this field application, a single sample stream was extracted from this low-pressure, low-temperature process and successfully analyzed by these devices. In late 2005,

  8. Biomass Gasification Research Facility Final Report

    SciTech Connect (OSTI)

    Snyder, Todd R.; Bush, Vann; Felix, Larry G.; Farthing, William E.; Irvin, James H.

    2007-09-30T23:59:59.000Z

    While thermochemical syngas production facilities for biomass utilization are already employed worldwide, exploitation of their potential has been inhibited by technical limitations encountered when attempting to obtain real-time syngas compositional data required for process optimization, reliability, and syngas quality assurance. To address these limitations, the Gas Technology Institute (GTI) carried out two companion projects (under US DOE Cooperative Agreements DE-FC36-03GO13175 and DE-FC36-02GO12024) to develop and demonstrate the equipment and methods required to reliably and continuously obtain accurate and representative on-line syngas compositional data. These objectives were proven through a stepwise series of field tests of biomass and coal gasification process streams. GTI developed the methods and hardware for extractive syngas sample stream delivery and distribution, necessary to make use of state-of-the-art on-line analyzers to evaluate and optimize syngas cleanup and conditioning. This multi-year effort to develop methods to effectively monitor gaseous species produced in thermochemical process streams resulted in a sampling and analysis approach that is continuous, sensitive, comprehensive, accurate, reliable, economical, and safe. The improved approach for sampling thermochemical processes that GTI developed and demonstrated in its series of field demonstrations successfully provides continuous transport of vapor-phase syngas streams extracted from the main gasification process stream to multiple, commercially available analyzers. The syngas stream is carefully managed through multiple steps to successfully convey it to the analyzers, while at the same time bringing the stream to temperature and pressure conditions that are compatible with the analyzers. The primary principle that guides the sample transport is that throughout the entire sampling train, the temperature of the syngas stream is maintained above the maximum condensation temperature of the vapor phase components of the conveyed sample gas. In addition, to minimize adsorption or chemical changes in the syngas components prior to analysis, the temperature of the transported stream is maintained as hot as is practical, while still being cooled only as much necessary prior to entering the analyzer(s). The successful transport of the sample gas stream to the analyzer(s) is accomplished through the managed combination of four basic gas conditioning methods that are applied as specifically called for by the process conditions, the gas constituent concentrations, the analyzer requirements, and the objectives of the syngas analyses: 1) removing entrained particulate matter from the sample stream; 2) maintaining the temperature of the sample gas stream; 3) lowering the pressure of the sample gas stream to decrease the vapor pressures of all the component vapor species in the sample stream; and 4) diluting the gas stream with a metered, inert gas, such as nitrogen. Proof-of-concept field demonstrations of the sampling approach were conducted for gasification process streams from a black liquor gasifier, and from the gasification of biomass and coal feedstocks at GTI’s Flex-Fuel Test Facility. In addition to the descriptions and data included in this Final Report, GTI produced a Special Topical Report, Design and Protocol for Monitoring Gaseous Species in Thermochemical Processes, that explains and describes in detail the objectives, principles, design, hardware, installation, operation and representative data produced during this successful developmental effort. Although the specific analyzers used under Cooperative Agreement DE-FC36-02GO12024 were referenced in the Topical Report and this Final Report, the sampling interface design they present is generic enough to adapt to other analyzers that may be more appropriate to alternate process streams or facilities.

  9. Retrofit California Overview and Final Reports

    SciTech Connect (OSTI)

    Choy, Howard; Rosales, Ana

    2014-03-01T23:59:59.000Z

    Energy efficiency retrofits (also called upgrades) are widely recognized as a critical component to achieving energy savings in the building sector to help lower greenhouse gas (GHG) emissions. To date, however, upgrades have accounted for only a small percentage of aggregate energy savings in building stock, both in California and nationally. Although the measures and technologies to retrofit a building to become energy efficient are readily deployed, establishing this model as a standard practice remains elusive. Retrofit California sought to develop and test new program models to increase participation in the energy upgrade market in California. The Program encompassed 24 pilot projects, conducted between 2010 and mid-2013 and funded through a $30 million American Recovery and Reinvestment Act (ARRA) grant from the U.S. Department of Energy’s (DOE) Better Buildings Neighborhood Program (BBNP). The broad scope of the Program can be seen in the involvement of the following regionally based Grant Partners: Los Angeles County (as prime grantee); Association of Bay Area Governments (ABAG), consisting of: o StopWaste.org for Alameda County o Regional Climate Protection Authority (RCPA) for Sonoma County o SF Environment for the City and County of San Francisco o City of San Jose; California Center for Sustainable Energy (CCSE) for the San Diego region; Sacramento Municipal Utilities District (SMUD). Within these jurisdictions, nine different types of pilots were tested with the common goal of identifying, informing, and educating the people most likely to undertake energy upgrades (both homeowners and contractors), and to provide them with incentives and resources to facilitate the process. Despite its limited duration, Retrofit California undoubtedly succeeded in increasing awareness and education among home and property owners, as well as contractors, realtors, and community leaders. However, program results indicate that a longer timeframe will be needed to transform the market and establish energy retrofits as the new paradigm. Innovations such as Flex Path, which came about because of barriers encountered during the Program, have already shown promise and are enabling increased participation. Together, the pilots represent an unprecedented effort to identify and address market barriers to energy efficiency upgrades and to provide lessons learned to shape future program planning and implementation. The statistics reflects the scope of the marketing and outreach campaigns, which tested a variety of approaches to increase understanding of the benefits of energy upgrades to drive participation in the Program. More traditional methods such as TV and radio advertisements were complimented by innovative community based social marketing campaigns that sought to leverage the trusted status of neighborhood organizations and leaders in order to motivate their constituents to undertake retrofits. The remainder of this report provides an overview of Retrofit California including brief summaries of the pilots’ main components and highlights, followed by the major findings or takeaway lessons from the approaches that were tested. Eleven of the pilots will be continued, with modifications, under the ratepayer-funded Regional Energy Networks. Involvement in the RENS by many of the Retrofit California partners will ensure that early lessons learned are carried forward to guide future programs for energy upgrades in California.

  10. Testing of SRS and RFETS Nylon Bag Material

    SciTech Connect (OSTI)

    Laurinat, J.E.

    1998-11-03T23:59:59.000Z

    This report compares the effects of radiation and heating on nylon bagout materials used at the Savannah River Site (SRS) and the Rocky Flats Environmental Technology Site (RFETS). Recently, to simplify the processing of sand, slag, and crucible (SS and C), FB-Line has replaced the low-density polyethylene (LDPE) and polyvinyl chloride (PVC) bags normally used to package cans of plutonium-bearing material with nylon bags. LDPE and PVC are not soluble in the nitric acid dissolver solution used in F-Canyon, so cans bagged using these materials had to be repackaged before they were added to the dissolver. Because nylon dissolves in nitric acid, cans bagged in nylon can be charged to the F-Canyon dissolvers without repackaging, thereby reducing handling requirements and personnel exposure. As part of a program to process RFETS SS and C at SRS, RFETS has also begun to use a nylon bagout material. The RFETS bag materials is made from a copolymer of nylon 6 and nylon 6.9, while the SRS material is made from a nylon 6 monomer. In addition, the SRS nylon has an anti-static agent added. The RFETS nylon is slightly softer than the SRS nylon, but does not appear to be as resistant to flex cracks initiated by contact with sharp corners of the inner can containing the SS and C.2 FB-Line Operations has asked for measurement of the effects of radiation and heating on these materials. Specifically, they have requested a comparison of the material properties of the plastics before and after irradiation, a measurement of the amount of outgassing when the plastics are heated, and a calculation of the amount of radiolytic gas generation. Testing was performed on samples taken from material that is currently used in FB-Line (color coded orange) and at RFETS. The requested tests are the same tests previously performed on the original and replacement nylon and LDPE bag materials.3,4,5. To evaluate the effect of irradiation on material properties, tensile stresses and elongations to break w ere compared for unirradiated and irradiated samples. A standard ASTM method for the measurement of tensile plastic properties6 was used. Properties were measured both parallel to the direction of machining (MD) and transverse to the direction of machining (TD). Tensile strength measurements showed that the ultimate strengths of the SRS replacement bag material decreased by 22 percent in the MD orientation and 17 percent in the TD orientation after irradiation with 5 x 106 rad, a dose equivalent to about 8-9 months exposure in a plutonium can. For the RFETS material, the decreases were 23 percent in the MD orientation and 56 percent in the TD orientation. Although the 5 x 106 dose significantly degraded the properties of both materials, their strengths remained superior to those previously measured for LDPE,4 even after irradiation. Elongations to break also decreased, especially for the SRS material. The decrease for the SRS material were 86 percent in the MD orientation and 95 percent in the TD orientation. For the RFETS material, elongations to break decreased at least 18 percent in the MD orientation and 29 percent in the TD orientation. When samples of both the SRS and RFETS materials were heated in a sealed container to the maximum expected storage can temperature of about 95 C, they outgassed at pressures ranging from 16 to 22 psig. These pressure increases would not cause a can to fail. Using a representative G value of 1.6 molecules/100 ev, the amount of outgassing due to radiolysis was calculated to be negligible. In conclusion, it may be stated that the results of the strength tests and the outgassing measurements and calculations demonstrate that the SRS and RFETS replacement bag materials are acceptable substitutes for LDPE with respect to mechanical properties.

  11. Analysis of Underground Storage Tanks System Materials to Increased Leak Potential Associated with E15 Fuel

    SciTech Connect (OSTI)

    Kass, Michael D [ORNL; Theiss, Timothy J [ORNL; Janke, Christopher James [ORNL; Pawel, Steven J [ORNL

    2012-07-01T23:59:59.000Z

    The Energy Independence and Security Act (EISA) of 2007 was enacted by Congress to move the nation toward increased energy independence by increasing the production of renewable fuels to meet its transportation energy needs. The law establishes a new renewable fuel standard (RFS) that requires the nation to use 36 billion gallons annually (2.3 million barrels per day) of renewable fuel in its vehicles by 2022. Ethanol is the most widely used renewable fuel in the US, and its production has grown dramatically over the past decade. According to EISA and RFS, ethanol (produced from corn as well as cellulosic feedstocks) will make up the vast majority of the new renewable fuel requirements. However, ethanol use limited to E10 and E85 (in the case of flex fuel vehicles or FFVs) will not meet this target. Even if all of the E0 gasoline dispensers in the country were converted to E10, such sales would represent only about 15 billion gallons per year. If 15% ethanol, rather than 10% were used, the potential would be up to 22 billion gallons. The vast majority of ethanol used in the United States is blended with gasoline to create E10, that is, gasoline with up to 10% ethanol. The remaining ethanol is sold in the form of E85, a gasoline blend with as much as 85% ethanol that can only be used in FFVs. Although DOE remains committed to expanding the E85 infrastructure, that market will not be able to absorb projected volumes of ethanol in the near term. Given this reality, DOE and others have begun assessing the viability of using intermediate ethanol blends as one way to transition to higher volumes of ethanol. In October of 2010, the EPA granted a partial waiver to the Clean Air Act allowing the use of fuel that contains up to 15% ethanol for the model year 2007 and newer light-duty motor vehicles. This waiver represents the first of a number of actions that are needed to move toward the commercialization of E15 gasoline blends. On January 2011, this waiver was expanded to include model year 2001 light-duty vehicles, but specifically prohibited use in motorcycles and off-road vehicles and equipment. UST stakeholders generally consider fueling infrastructure materials designed for use with E0 to be adequate for use with E10, and there are no known instances of major leaks or failures directly attributable to ethanol use. It is conceivable that many compatibility issues, including accelerated corrosion, do arise and are corrected onsite and, therefore do not lead to a release. However, there is some concern that higher ethanol concentrations, such as E15 or E20, may be incompatible with current materials used in standard gasoline fueling hardware. In the summer of 2008, DOE recognized the need to assess the impact of intermediate blends of ethanol on the fueling infrastructure, specifically located at the fueling station. This includes the dispenser and hanging hardware, the underground storage tank, and associated piping. The DOE program has been co-led and funded by the Office of the Biomass Program and Vehicle Technologies Program with technical expertise from the Oak Ridge National Laboratory (ORNL) and the National Renewable Energy Laboratory (NREL). The infrastructure material compatibility work has been supported through strong collaborations and testing at Underwriters Laboratories (UL). ORNL performed a compatibility study investigating the compatibility of fuel infrastructure materials to gasoline containing intermediate levels of ethanol. These results can be found in the ORNL report entitled Intermediate Ethanol Blends Infrastructure Materials Compatibility Study: Elastomers, Metals and Sealants (hereafter referred to as the ORNL intermediate blends material compatibility study). These materials included elastomers, plastics, metals and sealants typically found in fuel dispenser infrastructure. The test fuels evaluated in the ORNL study were SAE standard test fuel formulations used to assess material-fuel compatibility within a relatively short timeframe. Initially, these material studies included test fuels of Fuel C,

  12. Coastal Ohio Wind Project for Reduced Barriers to Deployment of Offshore Wind Energy

    SciTech Connect (OSTI)

    Gorsevski, Peter; Afjeh, Abdollah; Jamali, Mohsin; Carroll, Michael

    2014-04-09T23:59:59.000Z

    The Coastal Ohio Wind Project was created to establish the viability of wind turbines on the coastal and offshore regions of Northern Ohio. The project’s main goal was to improve operational unit strategies used for environmental impact assessment of offshore turbines on lake wildlife by optimizing and fusing data from the multi-instrument surveillance system and providing an engineering analysis of potential design/operational alternatives for offshore wind turbines. The project also developed a general economic model for offshore WTG deployment to quantify potential revenue losses due to wind turbine shutdown related to ice and avian issues. In a previous phase of this project (Award Number: DE-FG36-06GO86096), we developed a surveillance system that was used to collect different parameters such as passage rates, flight paths, flight directions, and flight altitudes of nocturnal migrating species, movements of birds and bats, and bird calls for assessing patterns and peak passage rates during migration. To derive such parameters we used thermal IR imaging cameras, acoustic recorders, and marine radar Furuno (XANK250), which was coupled with a XIR3000B digitizing card from Russell Technologies and open source radR processing software. The integration yielded a development of different computational techniques and methods, which we further developed and optimized as a combined surveillance system. To accomplish this task we implemented marine radar calibration, optimization of processing parameters, and fusion of the multi-sensor data in order to make inferences about the potential avian targets. The main goal of the data fusion from the multi-sensor environment was aimed at reduction of uncertainties while providing acceptable confidence levels with detailed information about the migration patterns. Another component comprised of an assessment of wind resources in a near lake environment and an investigation of the effectiveness of ice coating materials to mitigate adverse effects of ice formation on wind turbine structures. Firstly, a Zephir LiDAR system was acquired and installed at Woodlands School in Huron, Ohio, which is located near Lake Erie. Wind resource data were obtained at ten measurement heights, 200m, 150m, 100m, 80m, 60m, 40m, 38m, 30m, 20m, and 10m. The Woodlands School’s wind turbine anemometer also measured the wind speed at the hub height. These data were collected for approximately one year. The hub anemometer data correlated well with the LiDAR wind speed measurements at the same height. The data also showed that on several days different power levels were recorded by the turbine at the same wind speed as indicated by the hub anemometer. The corresponding LiDAR data showed that this difference can be attributed to variability in the wind over the turbine rotor swept area, which the hub anemometer could not detect. The observation suggests that single point hub wind velocity measurements are inadequate to accurately estimate the power generated by a turbine at all times since the hub wind speed is not a good indicator of the wind speed over the turbine rotor swept area when winds are changing rapidly. To assess the effectiveness of ice coatings to mitigate the impact of ice on turbine structures, a closed-loop icing research tunnel (IRT) was designed and constructed. By controlling the temperature, air speed, water content and liquid droplet size, the tunnel enabled consistent and repeatable ice accretion under a variety of conditions with temperatures between approximately 0°C and -20°C and wind speeds up to 40 miles per hour in the tunnel’s test section. The tunnel’s cooling unit maintained the tunnel temperature within ±0.2°C. The coatings evaluated in the study were Boyd Coatings Research Company’s CRC6040R3, MicroPhase Coatings Inc.’s PhaseBreak TP, ESL and Flex coatings. Similar overall performance was observed in all coatings tested in that water droplets form on the test articles beginning at the stagnation region and spreading in the downstream direction in time. When compari