Powered by Deep Web Technologies
Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

U-047: Siemens Automation License Manager Bugs Let Remote Users Deny  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7: Siemens Automation License Manager Bugs Let Remote Users 7: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code U-047: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code November 29, 2011 - 9:00am Addthis PROBLEM: Siemens Automation License Manager Bugs Let Remote Users Deny Service or Execute Arbitrary Code. PLATFORM: Siemens Automation License Manager 500.0.122.1 ABSTRACT: Several vulnerabilities were reported in Siemens Automation License Manager. reference LINKS: SecurityTracker Alert ID: 1026354 Bugtraq Siemens Advisory Services IMPACT ASSESSMENT: Medium Discussion: A remote user can execute arbitrary code on the target system. A remote user can cause denial of service conditions. A remote user can send specially crafted *_licensekey commands to trigger a

2

Siemens Power Generation, Inc.  

NLE Websites -- All DOE Office Websites (Extended Search)

Presented at the 2005 Pittsburgh Coal Conference Siemens Power Generation, Inc. Page 1 of 10 Siemens Power Generation, Inc., All Rights Reserved Development of a Catalytic...

3

Siemens Power Generation, Inc.  

NLE Websites -- All DOE Office Websites (Extended Search)

2005 Pittsburgh Coal Conference 2005 Pittsburgh Coal Conference Siemens Power Generation, Inc. Page 1 of 10 © Siemens Power Generation, Inc., All Rights Reserved Development of a Catalytic Combustor for Fuel Flexible Turbines W. R. Laster Siemens Westinghouse Power Corporation Abstract Siemens has been working on a catalytic combustor for natural gas operation for several years using the Rich Catalytic Lean (RCL TM ) design. The design has been shown to produce low NOx emissions on natural gas operation. By operating the catalyst section fuel rich, the design shows considerable promise for robust operation over a wide range of fuel compositions including syngas. Under the sponsorship of the U. S. Department of Energy' s National Energy Technology Laboratory, Siemens Westinghouse is conducting a three year

4

Siemens | Open Energy Information  

Open Energy Info (EERE)

Siemens Siemens Jump to: navigation, search Logo: Siemens Name Siemens Place Munich, Germany Phone number +49 (69) 797-6660 Website http://www.siemens.com/entry/c Coordinates 48.1391265°, 11.5801863° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.1391265,"lon":11.5801863,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

5

Siemens Corporate Technology CT | Open Energy Information  

Open Energy Info (EERE)

Name Siemens Corporate Technology (CT) Place Erlangan, Germany Sector Solar Product R&D lab for Siemens AG. Currently researching buckyballs and conductive plastic for solar...

6

Siemens SA | Open Energy Information  

Open Energy Info (EERE)

SA SA Jump to: navigation, search Name Siemens SA Place Amadora, Portugal Zip 2720-093 Sector Renewable Energy, Services, Solar Product Amadora-based, subsidiary of global services group Siemens. Siemans has provided several renewable energy projects primarily in the solar sector with equipment. Coordinates 38.75931°, -9.237849° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":38.75931,"lon":-9.237849,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

7

Siemens Government Services ESCO Qualification Sheet  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ESCO Qualification Sheet ESCO Qualification Sheet DOE Super ESPC Introduction to Siemens Government Services Siemens Government Services, Inc. (SGS) is a certified Energy Services Company (ESCO) by the Department of Energy to deliver Energy Savings Performance Contacting (ESPC) projects. SGS offers its customers the full range of Siemens advanced energy technologies along with a national and international service network of energy and environmental expert resources. As a single source provider, we are uniquely positioned to integrate and deliver Siemens energy expertise with advanced technologies, distributed delivery, engineered solutions and guaranteed savings performance. SGS as a prime contractor provides program management and contract compliant functions to ensure the timely

8

Siemens Power Generation | Open Energy Information  

Open Energy Info (EERE)

Generation Generation Jump to: navigation, search Name Siemens Power Generation Place Erlangen, Bavaria, Germany Zip 91058 Product Erlangen-based subsidiary of Siemens AG that develops, manufactures, and installs power plants and related equipment such as turbines. Its fuel cell subsidiary is Siemens Westinghouse. Coordinates 49.59795°, 11.00258° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":49.59795,"lon":11.00258,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

9

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS SOLAR INDUSTRIES...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NO. DE-AC36-83CH10093, WAIVER NO. W(A)-95-002, CH0850. The attached petition by Siemens Solar Industries (hereafter Siemens) is for an advance waiver of patent rights under...

10

Siemens Solar formerly ARCO Solar Corporation | Open Energy Information  

Open Energy Info (EERE)

Solar formerly ARCO Solar Corporation Solar formerly ARCO Solar Corporation Jump to: navigation, search Name Siemens Solar (formerly ARCO Solar Corporation) Place Arizona Product Built a 6MW CPV project in 1984, which was a technical failure due to encapsulation issues and was dismantled, absorbed by Siemens in 1990. References Siemens Solar (formerly ARCO Solar Corporation)[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Siemens Solar (formerly ARCO Solar Corporation) is a company located in Arizona . References ↑ "Siemens Solar (formerly ARCO Solar Corporation)" Retrieved from "http://en.openei.org/w/index.php?title=Siemens_Solar_formerly_ARCO_Solar_Corporation&oldid=351054"

11

NNSA Awards Contract for Largest Federal Wind Farm to Siemens...  

National Nuclear Security Administration (NNSA)

Awards Contract for Largest Federal Wind Farm to Siemens Government Technologies, Inc. | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing...

12

Kraftwerk Union KWU Siemens Power Generation | Open Energy Information  

Open Energy Info (EERE)

Sector Services Product KWU is a provider of components and services to the commercial nuclear utility industry. References Kraftwerk Union (KWU) - Siemens Power Generation.1...

13

Siemens Westinghouse Power Generation SWPG | Open Energy Information  

Open Energy Info (EERE)

Siemens Westinghouse Power Generation SWPG Siemens Westinghouse Power Generation SWPG Jump to: navigation, search Name Siemens Westinghouse Power Generation (SWPG) Place Pittsburgh, Pennsylvania Zip PA 15235-5 Product Siemens Westinghouse Power Generation is the fuel cell subsidiary of Siemens Power Generation. It develops and manufactures stationary solide oxide fuel cells. Coordinates 40.438335°, -79.997459° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.438335,"lon":-79.997459,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

14

County Partners with Siemens on Energy Upgrades | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Partners with Siemens on Energy Upgrades Partners with Siemens on Energy Upgrades County Partners with Siemens on Energy Upgrades July 9, 2010 - 11:11am Addthis What does this project do? Allows McHenry County to install cutting edge technology to reduce our energy costs. When you're really committed to energy efficiency and looking at $118,000 in potential energy savings annually, you want to share it. That's the view in McHenry County, Ill., which partnered with Siemens Building Technologies to launch mchenrycounty-eecbg.net to let residents understand the connection between recent energy efficiency projects and C02 emissions. The county, located outside the Chicago metropolitan area, was awarded $2,475,900 in Energy Efficiency and Conservation Block Grant (EECBG) funds through the Recovery Act in November. Through the Recovery Act-funded

15

Top of the World (Siemens) | Open Energy Information  

Open Energy Info (EERE)

Siemens) Siemens) Jump to: navigation, search Name Top of the World (Siemens) Facility Top of the World (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Duke Energy Carolinas LLC Developer Duke Energy Carolinas LLC Energy Purchaser PacifiCorp Location 4 miles northeast of Glenrock WY Coordinates 42.914132°, -105.691223° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.914132,"lon":-105.691223,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

16

Siemens Westinghouse Advanced Turbine Systems Program Final Summary  

NLE Websites -- All DOE Office Websites (Extended Search)

SIEMENS WESTINGHOUSE ADVANCED TURBINE SIEMENS WESTINGHOUSE ADVANCED TURBINE SYSTEMS PROGRAM FINAL SUMMARY Ihor S. Diakunchak Greg R. Gaul Gerry McQuiggan Leslie R. Southall Siemens Westinghouse Power Corporation 4400 Alafaya Trail Orlando, Florida 32826-2399 ABSTRACT This paper summarises achievements in the Siemens Westinghouse Advanced Turbine Systems (ATS) Program. The ATS Program, co-funded by the U.S. Department of Energy, Office of Fossil Energy, was a very successful multi-year (from 1992 to 2001) collaborative effort between government, industry and participating universities. The program goals were to develop technologies necessary for achieving significant gains in natural gas-fired power generation plant efficiency, a reduction in emissions, and a decrease in cost of electricity, while maintaining current

17

County Partners with Siemens on Energy Upgrades | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

County Partners with Siemens on Energy Upgrades County Partners with Siemens on Energy Upgrades County Partners with Siemens on Energy Upgrades July 9, 2010 - 11:11am Addthis What does this project do? Allows McHenry County to install cutting edge technology to reduce our energy costs. When you're really committed to energy efficiency and looking at $118,000 in potential energy savings annually, you want to share it. That's the view in McHenry County, Ill., which partnered with Siemens Building Technologies to launch mchenrycounty-eecbg.net to let residents understand the connection between recent energy efficiency projects and C02 emissions. The county, located outside the Chicago metropolitan area, was awarded $2,475,900 in Energy Efficiency and Conservation Block Grant (EECBG) funds through the Recovery Act in November. Through the Recovery Act-funded

18

Capricorn Ridge (Siemens) Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Capricorn Ridge (Siemens) Wind Farm Capricorn Ridge (Siemens) Wind Farm Jump to: navigation, search Name Capricorn Ridge (Siemens) Wind Farm Facility Capricorn Ridge (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Resources Developer NextEra Energy Resources Location TX Coordinates 31.844192°, -100.932612° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.844192,"lon":-100.932612,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

19

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS SOLAR INDUSTRIES...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

UNDER DOE CONTRACT NO. DE- AC36-83CH10093; W(A)-98-019; CH-0987 The Petitioner, Siemens Solar Industries (hereinafter "SSI"), has requested a waiver of domestic and foreign...

20

Test Automation Test Automation  

E-Print Network (OSTI)

Test Automation Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2013 Mousavi: Test Automation #12;Test Automation Outline Test Automation Mousavi: Test Automation #12;Test Automation Why? Challenges of Manual Testing Test-case design: Choosing inputs

Mousavi, Mohammad

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Automated Heart Wall Motion Abnormality Detection From Ultrasound Images using Bayesian Networks  

E-Print Network (OSTI)

Automated Heart Wall Motion Abnormality Detection From Ultrasound Images using Bayesian Networks± . maleeha.qazi@siemens.com , glenn.fung@siemens.com Abstract Coronary Heart Disease can be diagnosed by mea- suring and scoring regional motion of the heart wall in ultrasound images of the left ventricle (LV

Rosales, Rómer E.

22

Siemens Building Technologies and Thompson School District: SPP Success  

NLE Websites -- All DOE Office Websites (Extended Search)

Siemens Building Technologies and Thompson School District: SPP Siemens Building Technologies and Thompson School District: SPP Success Story Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

23

Windy Point - Siemens Wind Farm | Open Energy Information  

Open Energy Info (EERE)

Windy Point - Siemens Wind Farm Windy Point - Siemens Wind Farm Jump to: navigation, search Name Windy Point - Siemens Wind Farm Facility Windy Point - Siemens Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner Cannon/Tuolumne Wind Project Authority Developer Cannon/Tuolumne Wind Project Authority Energy Purchaser Turlock Irrigation District and Walnut Energy Center Authority Location North shore of Columbia River Coordinates 45.699622°, -120.774622° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":45.699622,"lon":-120.774622,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

24

Northern Colorado Wind Energy Center (Siemens) | Open Energy Information  

Open Energy Info (EERE)

Wind Energy Center (Siemens) Wind Energy Center (Siemens) Jump to: navigation, search Name Northern Colorado Wind Energy Center (Siemens) Facility Northern Colorado Wind Energy Center (Siemens) Sector Wind energy Facility Type Commercial Scale Wind Facility Status In Service Owner NextEra Energy Developer NextEra Energy Energy Purchaser Xcel Energy Location Logan County CO Coordinates 40.974539°, -103.025336° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":40.974539,"lon":-103.025336,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

25

Siemens Nuclear Power GmbH AREVA Nuclear Power | Open Energy...  

Open Energy Info (EERE)

| Sign Up Search Page Edit with form History Facebook icon Twitter icon Siemens Nuclear Power GmbH AREVA Nuclear Power Jump to: navigation, search Name Siemens Nuclear Power...

26

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION (SWPC)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

S* * S* * STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION (SWPC) FOR AN ADVANCED WAIVER OF DOMESTIC AND FOREIGN PATENT RIGHTS UNDER CONTRACT NO. DE-FC02-00CH11048, CH-1053, W(A)-01-006 The Petitioner, Siemens Westinghouse Power Corporation (SWPC), has requested a waiver of domestic and foreign patent rights for all subject inventions under DOE Contract No. DE-FC02-00CH11048, "Research and Development for Advanced Materials in Advanced Industrial Gas Turbines". In order to avoid fragmenting the technology, and thus adversely affect its assimilation and commercial development, as well as to enable SWPC to meet its cost sharing commitment, SWPC has requested that the waiver extend to both its own employees and those of its subcontractors, except subcontractors eligible to retain title to inventions

27

Combustion Turbine Repair Guidelines: Siemens V94.3A  

Science Conference Proceedings (OSTI)

For more than a decade, EPRI has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy frame gas turbines. The guidelines in this volume address...

2009-03-06T23:59:59.000Z

28

Siemens Concentrated Solar Power Ltd previously Solel Solar Systems | Open  

Open Energy Info (EERE)

Siemens Concentrated Solar Power Ltd previously Solel Solar Systems Siemens Concentrated Solar Power Ltd previously Solel Solar Systems Jump to: navigation, search Name Siemens Concentrated Solar Power Ltd (previously Solel Solar Systems) Place Beit-Shemesh, Israel Zip 99107 Sector Solar Product Israel-based subsidiary manufacturing solar thermal electricity generation (STEG) components for power plants, also develops some of its own STEG projects. Coordinates 31.75°, 35° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":31.75,"lon":35,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

29

Microsoft PowerPoint - Siemens_materials workshop MIT EI_120310.ppt [Compatibility Mode]  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Critical Critical Materials and Substitutes Critical Materials and Substitutes Siemens Corporation Dr Madhav D Manjrekar Dr. Madhav D. Manjrekar Green Energy & Power Systems Dr. Thomas Scheiter & Dr. Gotthard Rieger Materials Substitution and Recycling Materials Substitution and Recycling Dr. Martin Zachau & Pamela Horner OSRAM Sylvania y Dr. Henrik Stiesdal Siemens Wind Power ©Siemens Corporation, Corporate Research, 2010. All rights reserved. ©Siemens Corporation, Corporate Research, 2010. All rights reserved. Agenda * Introduction Introduction * Application Requirements * Renewable Generation & Power Electronics * Lighting * Lighting * Discussion Trans-Atlantic Workshop on Rare Earth Elements and Other Critical Materials for a Clean Energy Future Hosted by the MIT Energy Initiative

30

Construction of a Simulator for the Siemens Gas Turbine SGT-600.  

E-Print Network (OSTI)

?? This thesis covers the development of a simulator for the Siemens Gas Tur-bine SGT-600. An explanation on how a gas turbine works is also (more)

Nordstrm, Lisa

2005-01-01T23:59:59.000Z

31

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS SOLAR INDUSTRIES FOR AN ADVANCE WAIVER  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ADVANCE WAIVER ADVANCE WAIVER OF U.S. AND FOREIGN RIGHTS UNDER SUBCONTRACT NO. NREL-RAF-5-14142-03 UNDER DOE PRIME CONTRACT NO. DE-AC36-83CH10093, WAIVER NO. W(A)-95-002, CH0850. The attached petition by Siemens Solar Industries (hereafter Siemens) is for an advance waiver of patent rights under Subcontract No. NREL-RAF-5-14142-03, under DOE Contract No. DE-AC36-83CH10093. Siemens requests that the Department of Energy grant an advance waiver for the domestic and foreign rights to inventions developed in the performance of the above identified subcontract without limitation as to field of use and that these rights will be retained by Siemens subject to the standard Advance Waiver Patent Rights Clause with the enclosed U.S. Competitiveness paragraph as previously agreed to. Additionally, Siemens has

32

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER CORP. FOR AN ADVANCE WAIVER OF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SIEMENS WESTINGHOUSE POWER CORP. FOR AN ADVANCE WAIVER OF SIEMENS WESTINGHOUSE POWER CORP. FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC26-03NT41891; W(A)-04-013, CH-1183 The Petitioner, Siemens Westinghouse Power Corporation, (Siemens) was awarded this cooperative agreement for the performance of work entitled, "Catalytic Combustion for Fuel Flexible Turbines." The purpose of the cooperative agreement is to develop and demonstrate a cost effective, fuel flexible (syngas/natural gas) catalytic combustor that will achieve 2 ppm NOx emissions at the gas turbine exit and meet all other engine operational requirements. To meet the goals of High Efficiency Engines and Turbines (HEET), this program will develop an ultra-low-NOx catalytic combustor to burn coal-derived synthesis gas (syngas) and natural gas in existing and

33

REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SIEMENS WESTINGHOUSE POWER CORPORATION SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN SUBJECT INVENTIONS MADE IN THE COURSE OF OR UNDER LOCKHEED MARTIN SUBCONTRACT NO. 4500004925 UNDER DOE CONTRACT NO. DE-AC05-960R22464; AND FOR CERTAIN LARGE BUSINESS SUBCONTRACTS THEREUNDER; DOE WAIVER DOCKET W(A)99-011 [ORO-744] Siemens Westinghouse Power Corporation (Siemens Westinghouse) has made a timely request for an advance waiver to worldwide rights in Subject Inventions conceived or made in the course of or under Lockheed Martin Energy Research Subcontract No. 4500004925 under DOE Contract No. DE-AC05-960R22464 and under certain subcontracts entered thereunder with parties who do not qualify for treatment under Public Law 96-517. The primary program goal of this work, entitled,

34

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT No. DE-FC26-01NT41232 W(A)-02-020, CH-1103 The Petitioner, Siemens Westinghouse Power Corporation (Siemens), was awarded this cooperative agreement for the performance of work entitled, "On-Line Thermal Barrier Coating Monitor for Real-Time Failure Protection and Life Maximization." The purpose of the cooperative agreement is to develop and demonstrate an on-line thermal barrier coatingi (TBC) monitor for critical engine components, row 1 turbine blades and vanes. This on-line TBC monitor represents an important advancement toward achieving the program goals of improved reliability availability and maintainability (RAM) of existing and advanced gas turbine power plants by

35

Microsoft PowerPoint - Siemens_SECA_Pgh_2010_07_27.ppt [Read...  

NLE Websites -- All DOE Office Websites (Extended Search)

(E F NP) Copyright Siemens Energy Inc. 2010. All Rights Reserved Nr. 2 Nr. 2 Nr. 1 Market position New Technologies Business Segment (E F NT) New Technologies Business...

36

Automation Status  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Manufacturing R&D Workshop NREL Manufacturing R&D Workshop NREL H2/FC Manufacturing R&D Workshop Automation Status Garry Sperrick garry@sperkllc.com 585-259-0311 August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Presentation Overview ƒ Brief Introduction ƒ DOE / NREL - Review & Discussion ƒ Automation Platforms ƒ Automation Processes ƒ Automation Considerations of the Manufacturer ƒ Manufacturer and the Supplier ƒ Three (3) Automation Programs Following these Guidelines ƒ Automotive Component Manufacturing ƒ Medical Manufacturing ƒ Membrane Electrode Assembly Manufacturing ƒ Hypothetical Fuel Cell Manufacturing Platforms August 11, 2011 Automation Status NREL Manufacturing R&D Workshop Professional Bio ƒ Automation Technician - Mobil Chemical

37

NNSA Awards Contract for Largest Federal Wind Farm to Siemens Government  

National Nuclear Security Administration (NNSA)

Contract for Largest Federal Wind Farm to Siemens Government Contract for Largest Federal Wind Farm to Siemens Government Technologies, Inc. | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Home > Field Offices > Welcome to the NNSA Production Office > NPO Press Releases > NNSA Awards Contract for Largest Federal Wind ... NNSA Awards Contract for Largest Federal Wind Farm to Siemens Government

38

Home Automation  

E-Print Network (OSTI)

In this paper I briefly discuss the importance of home automation system. Going in to the details I briefly present a real time designed and implemented software and hardware oriented house automation research project, capable of automating house's electricity and providing a security system to detect the presence of unexpected behavior.

Ahmed, Zeeshan

2010-01-01T23:59:59.000Z

39

GTOP for Siemens-Westinghouse (SW) 501F Version 1.0  

Science Conference Proceedings (OSTI)

The GTOPSIEMENS-WESTINGHOUSE 501F software enables users to plan, manage, and document major overhauls of Siemens Energy Model SGT6-5000F simple cycle gas turbines and electric generators. The GTOPSIEMENS-WESTINGHOUSE 501F software has been developed to aid the power industry with economic and efficient planning, scheduling and execution of major overhauls of Siemens Energy Model SGT6-5000F simple cycle gas turbine generator units using computer-based techniques. This Gas Turbine Overhaul Plan (GTOPis p...

2010-12-02T23:59:59.000Z

40

Design Evolution, Durability and Reliability of Siemens Heavy-Duty Combustion Turbines  

Science Conference Proceedings (OSTI)

Advanced technology heavy frame combustion turbines carry a degree of technical risk because of new technologies incorporated into their design. This report reviews the design evolution of specific Siemens A.G. industrial combustion turbines in a standard format, which allows a qualitative and quantitative assessment of technical risks involved in their operation. Turbine models include the SGT5/6-2000E, SGT5/6-4000F, SGT5/6-1000F, SGT5-3000E, SGT6-3000E, SGT6-5000F, SGT6-6000G and the new Siemens SGT5/6...

2011-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Safety Evaluation Report on Siemens Power Corporation TELEPERM XS Safety System  

Science Conference Proceedings (OSTI)

This document is the Safety Evaluation Report (SER) issued by the U.S. Nuclear Regulatory Commission (NRC) to Siemens Power Corporation on the TELEPERM XS digital reactor protection system described in EPRI TR-114017. This SER is available only in combination with TR-114017.

2000-08-03T23:59:59.000Z

42

Test Automation Ant JUnit Test Automation  

E-Print Network (OSTI)

Test Automation Ant JUnit Test Automation Mohammad Mousavi Eindhoven University of Technology, The Netherlands Software Testing 2012 Mousavi: Test Automation #12;Test Automation Ant JUnit Outline Test Automation Ant JUnit Mousavi: Test Automation #12;Test Automation Ant JUnit Why? Challenges of Manual Testing

Mousavi, Mohammad

43

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER CORP. FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

WESTINGHOUSE POWER CORP. FOR AN ADVANCE WESTINGHOUSE POWER CORP. FOR AN ADVANCE WAIIVER OF DOMESTIC AND FOREIGN INVENTION RIGHTS UNDER DOE COOPERATIVE AGREEMENT NO. DE-FC26-03NT41907; W(A)-04-018, CH-1187 The Petitioner, Siemens Westinghouse Power Corporation, (Siemens) was awarded this subcontract under a cooperative agreement with the Energy and Environmental Research Corporation (EERC) for the performance of work entitled, "Water Extraction from Coal-Fired Power Plant Flue Gas." The purpose of the cooperative agreement is to develop a liquid desiccant- based, flue gas dehydration process technology to reduce water consumption in power plants. Specifically, the objective of the program is to generate sufficient sub-scale test data and conceptual commercial power plant evaluation to assess the process feasibility and merits for

44

Combustion Turbine Repair Guidelines: Siemens V84.3A (SGT6-4000F)  

Science Conference Proceedings (OSTI)

For more than a decade, the Electric Power Research Institute (EPRI) has been developing gas turbine hot section component repair and coating guidelines to assist utilities in the refurbishment of these critical and expensive parts. Utilities, generators, and repair vendors have used these guidelines to perform repairs on blades, turbine vanes, and combustion hardware. Guidelines now exist for a variety of conventional and advanced General Electric, Siemens/Westinghouse, Alstom, and Mitsubishi heavy fram...

2010-01-27T23:59:59.000Z

45

Design Evolution, Durability and Reliability of Siemens Heavy-Duty Combustion Turbines: Pedigree Matrices, Volume 4  

Science Conference Proceedings (OSTI)

Advanced technology heavy frame gas turbines carry a degree of technical risk because of new technologies incorporated into their design. This report reviews the design evolution of specific Siemens industrial gas turbines in a standard format, which allows a qualitative and quantitative assessment of technical risks involved in their operation.BackgroundThe current power generation market and the gas turbine market, in particular, continue to drive the ...

2013-12-16T23:59:59.000Z

46

Shell Solar GmbH formerly Siemens und Shell Solar GmbH | Open Energy  

Open Energy Info (EERE)

GmbH formerly Siemens und Shell Solar GmbH GmbH formerly Siemens und Shell Solar GmbH Jump to: navigation, search Name Shell Solar GmbH (formerly Siemens und Shell Solar GmbH) Place Munich, Bavaria, Germany Zip 80807 Sector Solar Product Manufacturer and distributor of solar energy equipment and products. Coordinates 48.136415°, 11.577531° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.136415,"lon":11.577531,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

47

Significant Impact Related to an Amendment Adding Siemens RODEX2A  

E-Print Network (OSTI)

Quad Cities Nuclear Power Station, Units 1 and 2, to support a change in fuel vendors from Siemens Power Corporation to General Electric and a transition to the use of GE14 fuel. In an August 9, 2001, telephone conference call between Mr. A. R. Haeger of EGC and Mr. S. N. Bailey of the NRC, the NRC requested that EGC propose a license condition limiting fuel burnup. In accordance with this request, this letter proposes a change to the Operating Licenses for QCNPS, Units 1 and 2, to add a license condition limiting the maximum rod average burnup to 60 gigawatt-days per metric ton of uranium (GWD/MTU) for any fuel rod until completion of an NRC environmental assessment supporting an increased limit. Reference 1 requested the incorporation of a Siemens Power Corporation topical report into QCNPS TS Section 5.6.5, "Core Operating Limits Report (COLR). " This topical report allows for a maximum rod average burnup of 62 GWD/MTU. In Reference 2, the NRC concluded that existing environmental assessments are acceptable if the fuel rod burnup levels are limited to 60 GWD/MTU. Since the Siemens Power Corporation topical report allows a burnup level greater than that evaluated by the existingAugust 27, 2001

Nrc Docket Nos

2001-01-01T23:59:59.000Z

48

Guideline for the Procurement of Siemens V94.3A Gas Turbine Parts  

Science Conference Proceedings (OSTI)

In recent years, a number of aftermarket component suppliers have begun offering replacement for certain D/E-class and F-class models. Several different designs, materials, and casting processes have been offered for these components for operation over at different full load firing temperatures. This procurement guideline is intended to provide owners with the requirements necessary to procure all three stages of buckets and nozzles for a Siemens V94.3A (also known as SGT5-4000F) gas turbine.

2009-03-06T23:59:59.000Z

49

Security Automation Conference & Workshop  

Science Conference Proceedings (OSTI)

... Security Automation Conference & Workshop. ... Richard Hale, DISA - Information Security & Security Automation in DoD (coming soon); ...

50

Automated dispenser  

DOE Patents (OSTI)

An automated dispenser having a conventional pipette attached to an actuating cylinder through a flexible cable for delivering precise quantities of a liquid through commands from remotely located computer software. The travel of the flexible cable is controlled by adjustable stops and a locking shaft. The pipette can be positioned manually or by the hands of a robot. 1 fig.

Hollen, R.M.; Stalnaker, N.D.

1989-04-06T23:59:59.000Z

51

REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

U5-30-Z002 04:U5pm Frorm-NlIIUNAL I Nf-NWCY L;CHNULULOY LABUKAI UKY -YI-U4L b4LL 1-411 r.uu6/uuJ U5-30-Z002 04:U5pm Frorm-NlIIUNAL I Nf-NWCY L;CHNULULOY LABUKAI UKY -YI-U4L b4LL 1-411 r.uu6/uuJ r -J Statement of Considerations REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN SUBJECT INVENTIONS MADE IN THE COURSE OF OR UNDER DEPARTMENT OF ENERGY CONTRACT NO. DE-AC26-98FT40355; DOE WAIVER DOCKET W(A)-98-009 [CH-0967] Siemens Westinghouse Power Corporation (hereinafter referred to as "SWPC"), has made a timely request for an advance waiver to worldwide rights in Subject Inventions made in the course of or under Department of Energy (DOE) Contract No. DE-AC26-98FT40355. The scope of the work calls for SWPC to perform a conceptual design and feasibility study of a High Efficiency Fossil-Fueled Power Plant (HEFPP) that incorporates a pressurized tubular solid oxide

52

New controllers aid substation automation  

SciTech Connect

Descriptions of and experience with Siemens voltage regulators, voltage regulator control panels, and digital meters used by two electric cooperatives are described. Magic Valley Electric Cooperative in Texas retrofitted substations to improve substation regulation control. 54 Siemens MJ-XTM voltage regulator control panels were installed, replacing load tap changer control units and single-stage voltage regulator control units. The Smoky Hill Electric Cooperative in Kansas installed Siemens 4700 digital meters and upgraded substation voltage regulators with Siemens JFR single-phase, step voltage regulators to address nightly overvoltage and summer peak demand problems.

Beaty, W.

1996-09-01T23:59:59.000Z

53

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS E~ERGY, INC. ("SEIMENS") FOR AN ADVANCE WAIVER OF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SIEMENS SIEMENS E~ERGY, INC. ("SEIMENS") FOR AN ADVANCE WAIVER OF PATENT RIGHTS UN!DER DOE A WARD NO. DE-EE0005493; W(A) 2012-024 I . ~iemer:s has r,e~uested la. waiver, ~f p~tent rights of the United States of Ameri~ for all sub3ect mvent10ns ansmg from rts pmi1c1pat1on under the above referenced award entitled "Offshore 12 MW Turbine Rotor with Advanced Materials and Passive Design Concepts." I The purpose of the aw~rd is to develop, demonstrate, and commercialize wind turbine rotor technologies that will, if fUCcessful, enable a reduction in cost of energy by at least 20 percent. The technologies inc~ude development of a prototype rotor that will be installed on the Siemens 2.3 MW test turbine lbcated at the National Renewable Energy Laboratory's National

54

REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

POWER CORPORATION FOR POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN SUBJECT INVENTIONS MADE UNDER SUBCONTRACT NO. C-93-0016532 UNDER DEPARTMENT OF ENERGY COOPERATIVE AGREEMENT NO. DE-FC21-90MC25140; DOE WAIVER DOCKET W(A) 03-012 [CH1139] The Petitioner, Siemens Westinghouse Power Corporation (SWPC), is a subcontractor to Southern Company Services, Inc. (SCS) under the subject cost shared cooperative agreement titled "Research and Development of the Hot Gas Cleanup Test Facility for Gasification and Pressurized Combustion." The overall scope of the Department of Energy (DOE) cooperative agreement with SCS calls for the design, construction, and operation of a facility to provide long- term hot gas cleanup and process testing for gasification systems and pressurized fluidized bed

55

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS SOLAR INDUSTRIES FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE DOE COOPERATIVE AGREEMENT NO. DE-FG48-97R8810617; W(A)-97- 034; CH-0937 The Petitioner, Siemens Solar Industries, has requested a waiver of domestic and foreign patent rights for all subject inventions arising from its participation under the above referenced cooperative agreement entitled "Commercialization of CIS Thin Film Photovoltaics." This cooperative agreement is to assist the Petitioner in commercializing its proprietary copper indium diselenide (CIS) thin film photovoltaic technology. The thin film technology promises better than average efficiency and lower-cost manufacturing. This is a two year program designed to purchase equipment for pilot production of CIS modules, and for Petitioner to demonstrate, on a pilot scale, process capabilities and cost

56

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS SOLAR INDUSTRIES FOR AN ADVANCE  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NREL NREL SUBCONTRACT NO. ZAK-8-17619-19 UNDER DOE CONTRACT NO. DE- AC36-83CH10093; W(A)-98-019; CH-0987 The Petitioner, Siemens Solar Industries (hereinafter "SSI"), has requested a waiver of domestic and foreign patent rights for all subject inventions arising from its participation under th, above referenced subcontract entitled "Commercialization of CIS-Based Thin-Film PV." The ) Petitioner is a ower. tie subcontractor under the referenced NREL subcontract wi / Res3areh lstituce - (SRI),a- 1 ot-for profit organi7ztion. 4 The contract pertains to the use of alloys of copper indium diselenide (CuInSe 2 , hereinafter "CIS") in photovoltaic cells. CIS-based photovoltaic cells have shown promise in reducing the cost of photovoltaics well below the cost of crystalline silicon-based photovoltaic

57

REQUEST BY SIEMENS WESTINGHOUSE POWER CORPORATION FOR AN ADVANCE WAIVER OF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

POWER POWER CORPORATION FOR AN ADVANCE WAIVER OF DOMESTIC AND FOREIGN RIGHTS IN SUBJECT INVENTIONS MADE IN THE COURSE OF OR UNDER DEPARTMENT OF ENERGY CONTRACT NO. DE-AC26-98FT40002; DOE WAIVER DOCKET W(A)-98-022 [CH-0988] Siemens Westinghouse Power Corporation (hereinafter referred to as "SWPC"), has made a timely request for an advance waiver to worldwide rights in Subject Inventions made in the course of or under Department of Energy (DOE) Contract No. DE-AC26-98NT40002. The scope of the work calls for SWPC to identify and address the key hot corrosion and oxidation issues that are associated with the utilization of porous metal filter media in pressurized fluidized bed combustion systems. The work is sponsored by the Office of Fossil Energy. The dollar amount of the contract is $1,511,527 with SWPC cost sharing $347,651, or

58

Siemens PG Wind Power Division formerly Bonus Energy A S | Open Energy  

Open Energy Info (EERE)

PG Wind Power Division formerly Bonus Energy A S PG Wind Power Division formerly Bonus Energy A S Jump to: navigation, search Name Siemens PG Wind Power Division (formerly Bonus Energy A/S) Place Brande, Denmark Zip DK-7330 Sector Wind energy Product A wind turbine manufacturer whose products range from 600kW to 2.3MW. Coordinates 55.94278°, 9.12803° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":55.94278,"lon":9.12803,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

59

Release and disposal of materials during decommissioning of Siemens MOX fuel fabrication plant at Hanau, Germany  

SciTech Connect

In September 2006, decommissioning and dismantling of the Siemens MOX Fuel Fabrication Plant in Hanau were completed. The process equipment and the fabrication buildings were completely decommissioned and dismantled. The other buildings were emptied in whole or in part, although they were not demolished. Overall, the decommissioning process produced approximately 8500 Mg of radioactive waste (including inactive matrix material); clearance measurements were also performed for approximately 5400 Mg of material covering a wide range of types. All the equipment in which nuclear fuels had been handled was disposed of as radioactive waste. The radioactive waste was conditioned on the basis of the requirements specified for the projected German final disposal site 'Schachtanlage Konrad'. During the pre-conditioning, familiar processes such as incineration, compacting and melting were used. It has been shown that on account of consistently applied activity containment (barrier concept) during operation and dismantling, there has been no significant unexpected contamination of the plant. Therefore almost all the materials that were not a priori destined for radioactive waste were released without restriction on the basis of the applicable legal regulations (chap. 29 of the Radiation Protection Ordinance), along with the buildings and the plant site. (authors)

Koenig, Werner [TUEV NORD EnSys Hannover GmbH and Co. KG (Germany); Baumann, Roland [Siemens AG, Power Generation (Germany)

2007-07-01T23:59:59.000Z

60

Advanced Gas Turbine Guidelines: Startup and Operations of the Siemens 84.3A in Peaking Service  

Science Conference Proceedings (OSTI)

Worldwide pressures to reduce power generation costs have led domestic and foreign manufacturers to build high-efficiency gas turbines using leading-edge technology. To assure the staying power of these turbines, EPRI launched a multi-year Durability Surveillance Program in 1991 to monitor advanced industrial gas turbines currently produced by major turbine manufacturers. This report discusses the startup and initial site testing of a new Siemens Model V84.3A combustion turbine at the Hawthorn Station op...

1997-12-24T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Guideline for the Procurement of Siemens V84.3A (SGT6-4000F) Gas Turbine Parts  

Science Conference Proceedings (OSTI)

In recent years, a number of aftermarket component suppliers have begun offering replacement for certain D/E-class and F-class models. Several different designs, materials, and casting processes have been offered for these components for operation at different full load firing temperatures. This procurement guideline is intended to provide owners with the requirements necessary to procure all four stages of blades and vanes for a Siemens V84.3A gas turbine.

2010-01-28T23:59:59.000Z

62

Automated deduction for verification  

Science Conference Proceedings (OSTI)

Automated deduction uses computation to perform symbolic logical reasoning. It has been a core technology for program verification from the very beginning. Satisfiability solvers for propositional and first-order logic significantly automate the task ...

Natarajan Shankar

2009-10-01T23:59:59.000Z

63

Making automation work  

Science Conference Proceedings (OSTI)

Today's automated systems provide enormous safety and convenience. However, when glitches, problems, or breakdowns occur, the results can be catastrophic.

Samuel Greengard

2009-12-01T23:59:59.000Z

64

Evolution of industrial automation  

Science Conference Proceedings (OSTI)

Automation has been of high priority for the manufacturing sector, from Ford's first set of Model-T Assembly lines in the early 1920s to the modern factory floor. With appropriate automation, the aim was to rationalise the production and keep ... Keywords: Ethernet, architecture, automated manufacturing, bus topology, control servers, distributed control, economies of scale, embedded intelligence, functionality, fuzzy logic, global village, graphic panel, industrial automation, networking, networks

R. Murugesan

2006-03-01T23:59:59.000Z

65

Automated task allocation  

Science Conference Proceedings (OSTI)

The goal of the paradigm shift in Air Traffic Management (ATM) is to increase its overall performance by means of redesigning processes, evolving to a more automated, autonomous and predictable system. Nevertheless, when dealing with automation, it is ... Keywords: ATM, anticipatory, autonomous, centric, compensatory, decision support tools, level of automation, operations research, optimisation, performance metrics, task allocation

Roco Barragn Montes, Eduardo Garca, Francisco Javier Sez Nieto

2013-05-01T23:59:59.000Z

66

Automated solar cell assembly team process research. Annual subcontract report, 1 January 1993--31 December 1993  

DOE Green Energy (OSTI)

This report describes work done under the Photovoltaic Manufacturing Technology (PVMaT) project, Phase 3A, which addresses problems that are generic to the photovoltaic (PV) industry. Spire`s objective during Phase 3A was to use its light soldering technology and experience to design and fabricate solar cell tabbing and interconnecting equipment to develop new, high-yield, high-throughput, fully automated processes for tabbing and interconnecting thin cells. Areas that were addressed include processing rates, process control, yield, throughput, material utilization efficiency, and increased use of automation. Spire teamed with Solec International, a PV module manufacturer, and the University of Massachusetts at Lowell`s Center for Productivity Enhancement (CPE), automation specialists, who are lower-tier subcontractors. A number of other PV manufacturers, including Siemens Solar, Mobil Solar, Solar Web, and Texas instruments, agreed to evaluate the processes developed under this program.

Nowlan, M.J.; Hogan, S.J.; Darkazalli, G.; Breen, W.F.; Murach, J.M.; Sutherland, S.F.; Patterson, J.S. [Spire Corp., Bedford, MA (United States)

1994-06-01T23:59:59.000Z

67

CAESAR: Computer Automated Resummations  

E-Print Network (OSTI)

This talk gives a brief discussion of the motivations and principles behind computer automated expert semi-analytical resummation (CAESAR) for QCD final states.

Gavin P. Salam

2004-07-30T23:59:59.000Z

68

Security Automation Developer Days  

Science Conference Proceedings (OSTI)

... not addressed is the actual distribution of standardized ... 3:30 4:45 Automation Content Repositories ... provide protocols for querying devices as to ...

2012-10-26T23:59:59.000Z

69

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

Fully-Automated Demand Response Test in Large Facilities14in DR systems. Demand Response using HVAC in Commercialof Fully Automated Demand Response in Large Facilities

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

70

Formaldehyde and VOC Emissions from a Siemens-Westinghouse 501F Combustion Turbine with Lean Pre-Mix Combustors and SCR and CO Catalysts  

Science Conference Proceedings (OSTI)

This report presents a summary of flue gas formaldehyde and volatile organic compounds (VOCs) measurements conducted at a Siemens-Westinghouse 501F gas-fired combustion turbine with lean pre-mix low-NOx combustors and selective catalytic reduction (SCR) and carbon monoxide (CO) catalysts.

2004-01-30T23:59:59.000Z

71

Formaldehyde Emissions from a Siemens-Westinghouse 501F Combustion Turbine with Pre-Mix Combustors, with SCR and CO Catalysts  

Science Conference Proceedings (OSTI)

This interim report presents a summary of formaldehyde emission measurements conducted at full operating load from a Siemens-Westinghouse 501F gas-fired combustion turbine with lean pre-mix low-NOx combustors, and selective catalytic reduction (SCR) and carbon monoxide (CO) catalysts.

2003-02-26T23:59:59.000Z

72

Automated Demand Response Today  

Science Conference Proceedings (OSTI)

Demand response (DR) has progressed over recent years beyond manual and semi-automated DR to include growing implementation and experience with fully automated demand response (AutoDR). AutoDR has been shown to be of great value over manual and semi-automated DR because it reduces the need for human interactions and decisions, and it increases the speed and reliability of the response. AutoDR, in turn, has evolved into the specification known as OpenADR v1.0 (California Energy Commission, PIER Program, C...

2012-03-29T23:59:59.000Z

73

Automated Program Description  

E-Print Network (OSTI)

The Programmer's apprentice (PA) is an automated program development tool. The PA depends upon a library of common algorithms (cliches) as the source of its knowledge about programming. The PA uses these cliches to understand ...

Cyphers, D. Scott

74

Automated reaction mapping  

Science Conference Proceedings (OSTI)

Automated reaction mapping is a fundamental first step in the analysis of chemical reactions and opens the door to the development of sophisticated chemical kinetic tools. This article formulates the reaction mapping problem as an optimization problem. ... Keywords: Cheminformatics, mechanisms

John D. Crabtree; Dinesh P. Mehta

2009-02-01T23:59:59.000Z

75

Roxboro Integrated Automation Project  

Science Conference Proceedings (OSTI)

EPRI, Carolina Power & Light (CP&L), and ASEA Brown Boveri (ABB) formed an alliance to develop and demonstrate automation technologies at CP&LOs Roxboro Plant. This alliance is governed by a Memorandum of Understanding that allows all parties to share in the success of the products developed, and to contribute to their commercialization. This research project is intended to demonstrate the economic benefits of efficient and useful plant-wide automation technologies for the utility industry. Successful im...

1997-01-12T23:59:59.000Z

76

Automating DNA processing  

E-Print Network (OSTI)

Technology is currently available to identify the genetic codes responsible for physical traits and genetic diseases in both plants and animals. Regardless of whether the final goal is medical diagnosis or breeder selection, extensive time and resources must be spent in laboratory research to determine the genetic structure of the relevant organisms. DNA processing is riddled with time intensive laboratory techniques that must be improved or replaced if genotyping large numbers of samples is to be accomplished. This thesis identifies and explains modules in DNA processing and how they can be improved by automation. modules associated with genome mapping are the focus of most of the discussion. A functional biochemistry background is provided so that researchers in automation can be efficiently assimilated to future biochen-fistry/automation projects. The needs of biochemistry researchers at Texas A&M University are specifically addressed. Herein, DNA processing has been defined as a series of discrete sub-processes or process modules in order to aid scheduling of future automation projects. Target process modules (sub-processes with a high probability of automation success) have been identified. In addition, possible automation solutions have been proposed for each target module along with a characterization of fundamental design parameters. Concluding this text is a discussion of procedures in genome mapping that have not been sufficiently automated. The initial focus of this thesis is on short term solutions. However, attention is given to more conceptual solutions accompanied by the biochemistry background necessary to begin developing them. Though systems are proposed to improve the efficiency of many processes, no implementation has been attempted. Design specifications are based on observation of current laboratory techniques and the variance that is typically allowed in relevant process parameters in TAMU laboratories.

Wienen, Michael Jan

1994-01-01T23:59:59.000Z

77

HIGHLY AUTOMATED MACROMOLECULAR  

NLE Websites -- All DOE Office Websites (Extended Search)

AUTOMATED MACROMOLECULAR AUTOMATED MACROMOLECULAR CRYSTALLOGRAPHY BEAMLINE (AMX) Group Leader: Dieter Schneider Proposal Team: M. Allaire 1 , L. Berman 1 , M. Chance 2 , W. Hendrickson 3 , A. Héroux 1 , J. Jakoncic 1 , A. Orville 1 , H. Robinson 1 , D. Schneider 1 , W. Shi 2 , A. Soares 1 , V. Stojanoff 1 , R. Sweet 1 1 Brookhaven National Laboratory, 2 Case Western Reserve University, 3 Columbia University MISSION APPLICATIONS AND CAPABILITIES ADDITIONAL INFORMATION * AMX at NSLS-II will provide structural biologists with ready access to an advanced macromolecular crystallography (MX) beamline for the elucidation of structure and function of macromolecular complexes. * Its high flux, tunable energy, and natively small focal spot will make it a crystallographer's preferred beamline. * Its high degree of automation will provide a high throughput

78

Automated software engineering: supporting understanding  

Science Conference Proceedings (OSTI)

The most important role for automation in software engineering is the support of human understanding. Some aspects of understanding and how it can be supported are discussed. Keywords: Automation, Complexity, Description, Fragmentation, Manipulation, Mechanisation

Michael Jackson

2008-12-01T23:59:59.000Z

79

Automated Transportation Management System (ATMS) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Waste Management Packaging and Transportation Automated Transportation Management System (ATMS) Automated Transportation Management System (ATMS) The Department of Energy's...

80

Automated Demand Response and Commissioning  

E-Print Network (OSTI)

internal conditions. Maximum Demand Saving Intensity [W/ft2]automated electric demand sheds. The maximum electric shed

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Bourassa, Norman

2005-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Portable Automated Mesonet II  

Science Conference Proceedings (OSTI)

The Portable Automated Mesonet II (PAM II) system was developed by NCAR to provide surface mesoscale data for the research needs of the atmospheric science community. The PAM system has 60 remote stations with planned growth to 300. In such a ...

Fred V. Brock; George H. Saum; Steven R. Semmer

1986-12-01T23:59:59.000Z

82

Specific PVMaT R&D on Siemens Cz silicon product manufacturing: Annual Subcontract Report, June 1998 -- June 1999  

DOE Green Energy (OSTI)

This report describes work done by Siemens Solar Industries (SSI) from June 1998 to June 1999 during Phase 1 of a three-phase Photovoltaic Manufacturing Technology (PVMaT 5A2) subcontract from DOE/NREL. The work focuses on improvements in the cost per watt of Cz modules and improved PV module manufacturing technology. The first step toward reducing cost was to reduce wafer thickness. The approach has been a two-step reduction in thickness, from 385 microns to 250 micron cells, and then from 250 microns to 125 micron cells during Phase II. During Phase I, the handling tools, the back-surface-field process, and the confirmation of the environmental integrity of thinner wafers have all been accomplished. Cells with efficiency over 15.5% have been demonstrated in high-volume production. SSI has initiated the development and growth of 200-mm ingot to be fabricated into wafers and eventually cells. Cell and module production with 200-mm cells will begin during Phase II. Hazardous waste reduction has been attacked in two ways. The largest consumable item aside from polysilicon is silicon carbide (SiC) used in the wafer-slicing process. This SiC use has been reduced significantly through recycling and re-use. This program approach is well under way at SSI, with more than 25% of the SiC used being recycled. The largest hazardous waste volume at SSI is the caustic waste generated in the wafer etching processes. The reduction of this waste will be accomplished using subcontractors with extensive environmental compliance experience such that the solution is driven by best available techniques, lowering operating cost as a secondary motive. These three areas of focus thinner cells, larger cells and modules, and hazardous waste reduction have the potential to reduce cost by about 30% per watt. This first phase of large 150-mm-thinner 250-micron cells has demonstrated a potential for 10% cost reduction, with the final yield improvements being implemented in the SSI line now. The follow-on work during Phase II, with thinner cells, larger cells, and continued waste reduction, will allow the 30%, three-year goal to be met.

Jester, T. L.

2000-04-24T23:59:59.000Z

83

Terminal automation system maintenance  

SciTech Connect

Nothing has improved petroleum product loading in recent years more than terminal automation systems. The presence of terminal automation systems (TAS) at loading racks has increased operational efficiency and safety and enhanced their accounting and management capabilities. However, like all finite systems, they occasionally malfunction or fail. Proper servicing and maintenance can minimize this. And in the unlikely event a TAS breakdown does occur, prompt and effective troubleshooting can reduce its impact on terminal productivity. To accommodate around-the-clock loading at racks, increasingly unattended by terminal personnel, TAS maintenance, servicing and troubleshooting has become increasingly demanding. It has also become increasingly important. After 15 years of trial and error at petroleum and petrochemical storage and transfer terminals, a number of successful troubleshooting programs have been developed. These include 24-hour {open_quotes}help hotlines,{close_quotes} internal (terminal company) and external (supplier) support staff, and {open_quotes}layered{close_quotes} support. These programs are described.

Coffelt, D.; Hewitt, J. [Engineered Systems Inc., Tempe, AZ (United States)

1997-01-01T23:59:59.000Z

84

Automated gas chromatography  

DOE Patents (OSTI)

An apparatus and process for the continuous, near real-time monitoring of low-level concentrations of organic compounds in a liquid, and, more particularly, a water stream. A small liquid volume of flow from a liquid process stream containing organic compounds is diverted by an automated process to a heated vaporization capillary where the liquid volume is vaporized to a gas that flows to an automated gas chromatograph separation column to chromatographically separate the organic compounds. Organic compounds are detected and the information transmitted to a control system for use in process control. Concentrations of organic compounds less than one part per million are detected in less than one minute. 7 figs.

Mowry, C.D.; Blair, D.S.; Rodacy, P.J.; Reber, S.D.

1999-07-13T23:59:59.000Z

85

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report includes assessments and test results of four end-use technologies, representing products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) standard that was introduced to the public in 2008 and currently used in two ...

2008-12-22T23:59:59.000Z

86

Automated Demand Response Tests  

Science Conference Proceedings (OSTI)

This report, which is an update to EPRI Report 1016082, includes assessments and test results of four end-use vendor technologies. These technologies represent products in the residential, commercial, and industrial sectors, each configured to automatically receive real-time pricing information and critical peak pricing (CPP) demand response (DR) event notifications. Four different vendors were asked to follow the interface requirements set forth in the Open Automated Demand Response (OpenADR) Communicat...

2009-03-30T23:59:59.000Z

87

Testing and Performance of the Siemens V84.3A Gas Turbine in Peaking Service at Hawthorn Station of Kansas City Power & Light Compan y  

Science Conference Proceedings (OSTI)

EPRI's durability surveillance (DS) program, in place since 1991, is producing the first in-service performance and operating data on the newest high-efficiency gas turbines. This detailed investigation of the Siemens V84.3A installed at the Kansas City Power & Light (KCP&L) Hawthorn Station is providing plant personnel and the manufacturer with valuable information for solving initial problems, and will help all power producers specify, operate, and maintain a new generation of high-performance gas turb...

1998-12-31T23:59:59.000Z

88

TJ Automation | Open Energy Information  

Open Energy Info (EERE)

TJ Automation TJ Automation Jump to: navigation, search Name TJ Automation Facility TJ Automation Sector Wind energy Facility Type Small Scale Wind Facility Status In Service Owner TJ Automation Energy Purchaser TJ Automation Location Archbold OH Coordinates 41.45823855°, -84.30666804° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":41.45823855,"lon":-84.30666804,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

89

Automated Demand Response and Commissioning  

NLE Websites -- All DOE Office Websites (Extended Search)

and Commissioning Title Automated Demand Response and Commissioning Publication Type Conference Paper LBNL Report Number LBNL-57384 Year of Publication 2005 Authors Piette, Mary...

90

Automated Centrifugal Chiller Diagnostician - Available ...  

Summary. Researchers and engineers at PNNL have developed an automated, sophisticated, multi-level, real-time centrifugal chiller diagnostician with ...

91

Automated fiber pigtailing machine  

DOE Patents (OSTI)

The Automated Fiber Pigtailing Machine (AFPM) aligns and attaches optical fibers to optoelectronic (OE) devices such as laser diodes, photodiodes, and waveguide devices without operator intervention. The so-called pigtailing process is completed with sub-micron accuracies in less than 3 minutes. The AFPM operates unattended for one hour, is modular in design and is compatible with a mass production manufacturing environment. This machine can be used to build components which are used in military aircraft navigation systems, computer systems, communications systems and in the construction of diagnostics and experimental systems. 26 figs.

Strand, O.T.; Lowry, M.E.

1999-01-05T23:59:59.000Z

92

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

al: Installation and Commissioning Automated Demand ResponseConference on Building Commissioning: April 22 24, 2008al: Installation and Commissioning Automated Demand Response

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

93

Automation Alley Technology Center | Open Energy Information  

Open Energy Info (EERE)

Automation Alley Technology Center Jump to: navigation, search Name Automation Alley Technology Center Place United States Sector Services Product General Financial & Legal...

94

Installation and Commissioning Automated Demand Response Systems  

E-Print Network (OSTI)

their partnership in demand response automation research andand Techniques for Demand Response. LBNL Report 59975. Mayof Fully Automated Demand Response in Large Facilities.

Kiliccote, Sila; Global Energy Partners; Pacific Gas and Electric Company

2008-01-01T23:59:59.000Z

95

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation programmable automation controller to collect data on motor kilowatts, speed, and torque. Project Summary By using real time data collected by the...

96

Building Technologies Office: Automated Home Energy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Area Network Trends SmartGridCity(tm) Integration with Home Controls Automated HomeEnergy Management Automated Monitoring, Control, Diagnostics, Optimization and Soft Repair...

97

Automating the analytical laboratory via the Chemical Analysis Automation paradigm  

Science Conference Proceedings (OSTI)

To address the need for standardization within the analytical chemistry laboratories of the nation, the Chemical Analysis Automation (CAA) program within the US Department of Energy, Office of Science and Technology`s Robotic Technology Development Program is developing laboratory sample analysis systems that will automate the environmental chemical laboratories. The current laboratory automation paradigm consists of islands-of-automation that do not integrate into a system architecture. Thus, today the chemist must perform most aspects of environmental analysis manually using instrumentation that generally cannot communicate with other devices in the laboratory. CAA is working towards a standardized and modular approach to laboratory automation based upon the Standard Analysis Method (SAM) architecture. Each SAM system automates a complete chemical method. The building block of a SAM is known as the Standard Laboratory Module (SLM). The SLM, either hardware or software, automates a subprotocol of an analysis method and can operate as a standalone or as a unit within a SAM. The CAA concept allows the chemist to easily assemble an automated analysis system, from sample extraction through data interpretation, using standardized SLMs without the worry of hardware or software incompatibility or the necessity of generating complicated control programs. A Task Sequence Controller (TSC) software program schedules and monitors the individual tasks to be performed by each SLM configured within a SAM. The chemist interfaces with the operation of the TSC through the Human Computer Interface (HCI), a logical, icon-driven graphical user interface. The CAA paradigm has successfully been applied in automating EPA SW-846 Methods 3541/3620/8081 for the analysis of PCBs in a soil matrix utilizing commercially available equipment in tandem with SLMs constructed by CAA.

Hollen, R.; Rzeszutko, C.

1997-10-01T23:59:59.000Z

98

Robust automated knowledge capture.  

SciTech Connect

This report summarizes research conducted through the Sandia National Laboratories Robust Automated Knowledge Capture Laboratory Directed Research and Development project. The objective of this project was to advance scientific understanding of the influence of individual cognitive attributes on decision making. The project has developed a quantitative model known as RumRunner that has proven effective in predicting the propensity of an individual to shift strategies on the basis of task and experience related parameters. Three separate studies are described which have validated the basic RumRunner model. This work provides a basis for better understanding human decision making in high consequent national security applications, and in particular, the individual characteristics that underlie adaptive thinking.

Stevens-Adams, Susan Marie; Abbott, Robert G.; Forsythe, James Chris; Trumbo, Michael Christopher Stefan; Haass, Michael Joseph; Hendrickson, Stacey M. Langfitt

2011-10-01T23:59:59.000Z

99

Berkeley automated supernova search  

SciTech Connect

The Berkeley automated supernova search employs a computer controlled 36-inch telescope and charge coupled device (CCD) detector to image 2500 galaxies per night. A dedicated minicomputer compares each galaxy image with stored reference data to identify supernovae in real time. The threshold for detection is m/sub v/ = 18.8. We plan to monitor roughly 500 galaxies in Virgo and closer every night, and an additional 6000 galaxies out to 70 Mpc on a three night cycle. This should yield very early detection of several supernovae per year for detailed study, and reliable premaximum detection of roughly 100 supernovae per year for statistical studies. The search should be operational in mid-1982.

Kare, J.T.; Pennypacker, C.R.; Muller, R.A.; Mast, T.S.; Crawford, F.S.; Burns, M.S.

1981-01-01T23:59:59.000Z

100

Automation in modeling: using automation for finishing room capacity planning  

Science Conference Proceedings (OSTI)

Capacity planning of a furniture finishing system using both deterministic analysis and stochastic simulation is conveniently performed with the aid ActiveX Automation. Users interactively build a complete model of a finishing system with an Excel interface, ...

Ryan Heath Melton; C. Thomas Culbreth; Stephen D. Roberts; Jeffrey A. Joines

2001-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Validation Program - The Security Content Automation ...  

Science Conference Proceedings (OSTI)

... Information technology Laboratory (ITL). Security Content Automation Protocol (SCAP) Validation Program. The SCAP Validation ...

2013-12-10T23:59:59.000Z

102

Automating Personalized Battery Management on Smartphones  

E-Print Network (OSTI)

3 Automating Battery Management . . . . . . .122 Battery Goal Setting UI . . . . . . . . . . . . . . .Power and Battery Management . . . . . . . . . . . . . . .

Falaki, Mohamamd Hossein

2012-01-01T23:59:59.000Z

103

Automated hedcut illustration using isophotes  

Science Conference Proceedings (OSTI)

In this work, we present an automated system for creating hedcut illustrations, portraits rendered using small image feature aligned dots (stipples). We utilize edge detection and shading cues from the input photograph to direct stipple placement within ...

SungYe Kim; Insoo Woo; Ross Maciejewski; David S. Ebert

2010-06-01T23:59:59.000Z

104

Automated Assembly Using Feature Localization  

E-Print Network (OSTI)

Automated assembly of mechanical devices is studies by researching methods of operating assembly equipment in a variable manner; that is, systems which may be configured to perform many different assembly operations ...

Gordon, Steven Jeffrey

1986-12-01T23:59:59.000Z

105

Automation World Features New White Paper on Wireless Security...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security Automation World Features New White Paper on Wireless Security The April 2009 issue of Automation World magazine...

106

Open Automated Demand Response for Small Commerical Buildings  

E-Print Network (OSTI)

ofFullyAutomatedDemand ResponseinLargeFacilities. FullyAutomatedDemandResponseTestsinLargeFacilities. OpenAutomated DemandResponseCommunicationStandards:

Dudley, June Han

2009-01-01T23:59:59.000Z

107

Scenarios for Consuming Standardized Automated Demand Response Signals  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities.Fully Automated Demand Response Tests in Large Facilities.Interoperable Automated Demand Response Infrastructure.

Koch, Ed

2009-01-01T23:59:59.000Z

108

Disciplined agility for process control & automation  

E-Print Network (OSTI)

Process automation vendors must consider agility as a basis to gain a competitive edge in innovation. Process Automation systems can impact the operating cost of manufacturing equipment, the safe control of large quantities ...

Tibazarwa, Augustine

2009-01-01T23:59:59.000Z

109

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure,study of automated demand response in wastewater treatmentopportunities for demand response control strategies in

Thompson, Lisa

2008-01-01T23:59:59.000Z

110

AutoMed: an automated mediator for multi-issue bilateral negotiations  

Science Conference Proceedings (OSTI)

In this paper, we present AutoMed, an automated mediator for multi-issue bilateral negotiation under time constraints. AutoMed elicits the negotiators preferences and analyzes them. It monitors the negotiations and proposes possible solutions for resolving ... Keywords: Automated mediator, Experiments, Negotiation

Michal Chalamish; Sarit Kraus

2012-05-01T23:59:59.000Z

111

NISTIR 7511 Revision 1, Security Content Automation ...  

Science Conference Proceedings (OSTI)

... CONTENT AUTOMATION PROTOCOL (SCAP) VERSION 1.0 VALIDATION PROGRAM TEST REQUIREMENTS (DRAFT) XCCDF.V.2: The vendor ...

2013-04-29T23:59:59.000Z

112

Adaptable methodology for automation application development  

Science Conference Proceedings (OSTI)

An adaptable methodology for automation application development (AMAAD) is introduced. This development methodology is based on the key concept that design automation (DA) applications are a subset of higher level knowledge-based engineering (KBE) applications, ... Keywords: CommonKADS, Design automation, Knowledge-based engineering, MOKA, Productivity enhancement

Christian van der Velden; Cees Bil; Xinghuo Xu

2012-04-01T23:59:59.000Z

113

Collaborative Systems for Building Automation  

Science Conference Proceedings (OSTI)

This paper describes the use of new generation of PLC's and WinCC software in creating collaborative systems for managing, controlling and supervising building electric equipment. These systems assure all the requirements of a building and offer to the ... Keywords: Building Automation System, PLC, WinCC, Redundancy, HVAC, HAS, SCADA, HMI

Ioan Valentin Sita

2012-09-01T23:59:59.000Z

114

Automation ensures safety, extends production  

Science Conference Proceedings (OSTI)

This paper reviews some current improvements in offshore platform safety as a result of new regulations. In response to Norwegian Petroleum Directorate regulations limiting personnel on the rig floor, Weatherford Norway has developed a casing modem with remote-controlled power tongs. This paper reviews the various automated systems for handling drill pipes and joints on offshore platforms and how they work.

Perdue, J.M.

1996-06-01T23:59:59.000Z

115

Automated computation of scattering amplitudes  

E-Print Network (OSTI)

We review some of the recent advances in the computation of one-loop scattering amplitudes which led to the construction of efficient and automated computational tools for NLO predictions. Particular attention is devoted to unitarity-based methods and integrand-level reduction techniques. Extensions of one-loop integrand-level techniques to higher orders are also briefly illustrated.

Giovanni Ossola

2013-10-11T23:59:59.000Z

116

Rockwell Automation - Owens Corning Teaming Profile  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Owens Corning Rockwell Automation Owens Corning 1201 S. Second Street 247 York Road Milwaukee, WI 53204 Guelph, Ontario N1E 3G4 Business: Industrial Automation Business: Textile / Fiber Nigel Hitchings Frank Peel Marketing Manager Electrical Support Specialist Phone: 508-357-8404 Phone: 519-823-7208 Email: nehitchings@ra.rockwell.com Email: frank.peel@owenscorning.com Owens Corning partners with Rockwell Automation to retrofit fans with VFDs, saving $67,000 annually Project Scope Owens Corning and Rockwell Automation installed Variable Frequency Drives (VFDs) on one 125HP cooling fan and three 40HP recirculation fans at the Owens Corning Guelph Glass Plant. The VFDs were integrated with the existing Rockwell Automation programmable automation controller to collect

117

Automated Export Control.PDF  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3 3 I N S P E C T I O N R E P O R T U.S. DEPARTMENT OF ENERGY OFFICE OF INSPECTOR GENERAL OFFICE OF INSPECTIONS INSPECTION OF THE DEPARTMENT OF ENERGY'S AUTOMATED EXPORT CONTROL SYSTEM DECEMBER 2001 U.S. DEPARTMENT OF ENERGY Washington, DC 20585 December 7, 2001 MEMORANDUM FOR THE SECRETARY FROM: Gregory H. Friedman /s/ Inspector General SUBJECT: INFORMATION: Report on "Inspection of the Department of Energy's Automated Export Control System" BACKGROUND The National Defense Authorization Act for Fiscal Year 2000 (NDAA for FY 2000) contained a provision that not later than March 30 of each year the President will submit to Congress, beginning in the year 2000 and ending in the year 2007, an annual report on the Government's policies and procedures with respect to the export of technologies and technical information with

118

Automated Transportation Management System (ATMS)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Re evised June 2010 Re evised June 2010 Autom The Depa Transport an integra system al outbound air. Its ea 1989 DOE significant operationa commerce electronic rates, pre transporta users eva shipments opportunit logistics im ATMS is i radioactiv shipments System ATMS is a activities p packaging including materials. common s lading, fre * W * C S * A * H * E * * O 0 mated T artment of Ene tation Manage ated web-base lowing users freight shipm arly developm E Inspector G t opportunitie al efficiency t e. Today's sy cally prepare s pare shipping ation bills befo aluate carrier s, and use co ties for system mprovements ts capability t ve and other h s in a comple Modules a modular sys performed by g and transpo radioactive a . Its modules shipment info eight bills, rate System Web Applic Carrier Eval Selection Automated

119

Automated nutrient analyses in seawater  

Science Conference Proceedings (OSTI)

This manual was assembled for use as a guide for analyzing the nutrient content of seawater samples collected in the marine coastal zone of the Northeast United States and the Bering Sea. Some modifications (changes in dilution or sample pump tube sizes) may be necessary to achieve optimum measurements in very pronounced oligotrophic, eutrophic or brackish areas. Information is presented under the following section headings: theory and mechanics of automated analysis; continuous flow system description; operation of autoanalyzer system; cookbook of current nutrient methods; automated analyzer and data analysis software; computer interfacing and hardware modifications; and trouble shooting. The three appendixes are entitled: references and additional reading; manifold components and chemicals; and software listings. (JGB)

Whitledge, T.E.; Malloy, S.C.; Patton, C.J.; Wirick, C.D.

1981-02-01T23:59:59.000Z

120

Instrumentation, Controls, and Automation Newsletter  

Science Conference Proceedings (OSTI)

This is the first newsletter for the Instrumentation, Controls, and Automation program of EPRI. This newsletter summarizes results of past and current projects and provides an overview of projects that will be completed in 2010. The first article describes the recently prototyped software Asset Fault Signature Database. The second article, "Inter-Control Center Communications Protocol Benefits Assessment," describes a previously completed EPRI/Southern Company tailored collaboration project. "Survey of C...

2009-12-22T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Siemens AG 2009 Energy Sector  

E-Print Network (OSTI)

electrical blackout in New York City in 2003 which led to economic costs of about 1 billion US dollars Up to be provided Change from Consumers to Prosumers Increasing amount of volatile regenerative energy eCars as new

Ulm, Universität

122

Definition: Distribution Automation Communications Network | Open Energy  

Open Energy Info (EERE)

Automation Communications Network Automation Communications Network Jump to: navigation, search Dictionary.png Distribution Automation Communications Network A communications network or networks designed to deliver control signals and information between distribution automation devices, and between these devices and utility grid control systems. These networks can utilize wired or wireless connections, and can be utility-owned or provided as services by a third party.[1] Related Terms distribution automation References ↑ https://www.smartgrid.gov/category/technology/distribution_automation_communications_network [[C LikeLike UnlikeLike You like this.Sign Up to see what your friends like. ategory: Smart Grid Definitionssmart grid,smart grid, |Template:BASEPAGENAME]]smart grid,smart grid, Retrieved from

123

Guidelines for Planning Interoperable Distribution Automation Systems  

Science Conference Proceedings (OSTI)

Fully integrated distribution automation is a relatively new challenge for the utility industry, and the full range of new capabilities it enables are not well understood. In addition, developing an overall strategy to long-term automation integration and deployment through the use of open standards adds to the challenge. These guidelines were developed to describe the overall vision of distribution automation and to assist in application of emerging open standards to the procurement and integration of a...

2004-04-26T23:59:59.000Z

124

Automated testing using executable formal specifications  

Science Conference Proceedings (OSTI)

A new method is presented for the automated random generation of valid content-sensitive test data and corresponding oracle information. The process takes as input a specification of the program under test, expressed as a functional program, and produces ... Keywords: automated program testing, automated random test data generation, automatic testing, computer aided software engineering, executable formal specifications, formal specification, functional program, oracle information, output test cases, program testing, valid content-sensitive test data, valid input space

N. Sanders

1996-01-01T23:59:59.000Z

125

Automated Surface Observing System: Standby Power Options  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Automated Surface Observing System Standby Options Power Automated Surface Observing System (ASOS) General System Description * Self contained group of sensors and data gathering equipment that produces an automated weather observation * Weather observations support aviation, climate data, non government weather operations, public consumption, etc. * Initial deployment began in 1991 and continued through 1997 * Located at 884 sites nationwide, normally at airports * System has two distinct subsystems: Field installed equipment (DCP & Sensor Group) and an indoor processor (ACU) with peripherals * Separate facility power for DCP & Sensors and ACU 1 * measure and collect data * Located on the airport * back up group for 10 minutes * Currently pl

126

Substation automation gains momentum with modern options  

SciTech Connect

This paper discusses issues associated with utility substation automation. Monitoring equipment for monitoring power flow, quality, and harmonics for three substations simultaneously is described.

Beaty, W.

1996-12-01T23:59:59.000Z

127

Automated Continuous Commissioning of Commercial Buildings  

E-Print Network (OSTI)

Conference on Building Commissioning. San Francisco, CA. 17.Commercial Buildings Commissioning, LBNL- 56637, Nov. 2004.Automated Continuous Commissioning Tool GUI Screenshots from

Bailey, Trevor

2013-01-01T23:59:59.000Z

128

Building Technologies Office: Distributed Intelligent-Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Distributed Intelligent-Automated Demand Response Building Management System Research Project to someone by E-mail Share Building Technologies Office: Distributed...

129

Automated Demand Response Technology Demonstration Project for...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings...

130

Automated fenestration selection based on lighting performance...  

NLE Websites -- All DOE Office Websites (Extended Search)

i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent...

131

Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... NIST activities led to the approval of a new IEEE Robotics and Automation Society Standards Working Group on ... Lead Organizational Unit: el. Staff: ...

2013-01-10T23:59:59.000Z

132

Home Network Technologies and Automating Demand Response  

E-Print Network (OSTI)

networks_in_the_home_the_new_growth_market.htm [12] NationalHome Network Technologies and Automating Demand Responsethe University of California. Home Network Technologies and

McParland, Charles

2010-01-01T23:59:59.000Z

133

Automated Transmission Kikuchi Diffraction for Nanomaterials ...  

Science Conference Proceedings (OSTI)

Presentation Title, Automated Transmission Kikuchi Diffraction for Nanomaterials Characterization in the SEM. Author(s), Scott Sitzman. On-Site Speaker...

134

Automated micro-tracking planar solar concentrators  

E-Print Network (OSTI)

Photonics) University of California, San Diego, 2011UNIVERSITY OF CALIFORNIA, SAN DIEGO Automated Micro-TrackingChair University of California, San Diego iii DEDICATION To

Hallas, Justin Matthew

2011-01-01T23:59:59.000Z

135

REMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation  

E-Print Network (OSTI)

Terms -- Education, Laboratories, Manufacturing automation, Remote handling I.INTRODUCTION For a fewREMOTE LABORATORIES IN AUTOMATION: AIP-PRIMECA RAO ARI PLATFORM Remote Laboratories in Automation learners to train themselves on remote real or virtual systems. They represent essential components in e

Paris-Sud XI, Université de

136

Automated fuel pin loading system  

DOE Patents (OSTI)

An automated loading system for nuclear reactor fuel elements utilizes a gravity feed conveyor which permits individual fuel pins to roll along a constrained path perpendicular to their respective lengths. The individual lengths of fuel cladding are directed onto movable transports, where they are aligned coaxially with the axes of associated handling equipment at appropriate production stations. Each fuel pin can be reciprocated axially and/or rotated about its axis as required during handling steps. The fuel pins are inserted as a batch prior to welding of end caps by one of two disclosed welding systems.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA); Steffen, Jim M. (Richland, WA)

1985-01-01T23:59:59.000Z

137

Automate feeders to improve reliability  

SciTech Connect

Pacific Gas and Electric Co. (PG and E) improved system reliability and saved money with an alarm and control system for substation distribution switches using remote control by standard telephone-communication links. The method is especially well suited for urban and suburban areas with independent telephone and power systems. The automated systems can also add capability to areas now limited by the emergency capability. The primary distribution alarm and control system has both a substation and a field switch element. Photographs accompanying the description help to explain how the controls work. 7 figures. (DCK)

1981-01-01T23:59:59.000Z

138

Human-automation interaction for lunar landing aimpoint redesignation  

E-Print Network (OSTI)

Human-automation interactions are a critical area of research in systems with modem automation. The decision-making portion of tasks presents a special challenge for human-automation interactions because of the many factors ...

Needham, Jennifer M

2008-01-01T23:59:59.000Z

139

Concepts of User Centered Automation  

E-Print Network (OSTI)

The accident statistics of large technical systems have been steadily improved during the last decades. Also the number of fatal accidents in air and surface transportation is decreasing in spite off increased traffic. However, the relative share of so called human errors is increasing across application areas. Hence, for further improved reliability, the functional integration of humans in such systems must be reconsidered. Since the user, in the long run, will not and should not be eliminated by computers this paper reviews basic requirements of a human centered automation. Following an analysis of generic system functions, human factors requirements for automated functions are defined. It is shown how manual functions can be supported by assistance functions, for which a general system architecture and a classification scheme are presented. # 2001 ditions scientifiques et mdicales Elsevier SAS Zusammenfassung Die Unfallstatistiken grotechnischer Systeme haben sich in den letzten Jahrzehnten stndig verbessert, auch die Anzahl der Unflle mit Todesfolge im Luft- und Straenverkehr sinkt bei wachsendem Verkehrsaufkommen stetig. Der relative Anteil sogenannter menschlicher Fehler nimmt dagegen in allen Bereichen zu. Es besteht somit Anla, die Rolle des Menschen in derartigen Systemen neu zu berdenken, um die Zuverl ssigkeit komplexer Systeme weiter zu erhhen. Da der Benutzer auf lange Sicht nicht durch Rechner eliminiert werden kann und soll, untersucht dieser Beitrag die Erfordernisse einer benutzergerechten Automatisierung. Nach einer einleitenden Analyse grundlegender Systemfunktionen, der Automatisierungsgrenzen und der Leistungsdefizite des Menschen werden mgliche Formen und Strategien der Funktionsteilung zwischen Automatik und Benutzer hergeleitet. Zur Untersttzung...

Karl-friedrich Kraiss; Nico Hamacher

2001-01-01T23:59:59.000Z

140

Substation Integrated Automation System Based on DSP  

Science Conference Proceedings (OSTI)

This Paper introduces the application of digital signal processor (DSP) at Substation Integrated Automation System. Using the powerful digital signal processing capability of DSP, high-speed multi-channel data acquisition function, and excellent data ... Keywords: Substation, Digital Signal Processor, Integrated Automation System

Yanzhe Li; Duowang Fan; Xuwei Dong

2009-08-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper...

142

Findings from the 2004 Fully Automated Demand Response Tests...  

NLE Websites -- All DOE Office Websites (Extended Search)

the 2004 Fully Automated Demand Response Tests in Large Facilities Title Findings from the 2004 Fully Automated Demand Response Tests in Large Facilities Publication Type Report...

143

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers Publication Type...

144

A Demand Response (DR) Event: Benefits, Strategies, Automation...  

NLE Websites -- All DOE Office Websites (Extended Search)

A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Title A Demand Response (DR) Event: Benefits, Strategies, Automation and Future of DR Publication...

145

Design and Operation of an Open, Interoperable Automated Demand...  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated...

146

Demand Response and Open Automated Demand Response Opportunities...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demand Response and Open Automated Demand Response Opportunities for Data Centers Title Demand Response and Open Automated Demand Response Opportunities for Data Centers...

147

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities"Management and Demand Response in Commercial Buildings", L Band Commissioning Issues from an Automated Demand Response.

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

148

Findings from Seven Years of Field Performance Data for Automated...  

NLE Websites -- All DOE Office Websites (Extended Search)

Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings Title Findings from Seven Years of Field Performance Data for Automated Demand Response...

149

Open Automated Demand Response Dynamic Pricing Technologies and Demonstration  

E-Print Network (OSTI)

Goodin. 2009. Open Automated Demand Response Communicationsin Demand Response for Wholesale Ancillary Services. InOpen Automated Demand Response Demonstration Project. LBNL-

Ghatikar, Girish

2010-01-01T23:59:59.000Z

150

Field Demonstration of Automated Demand Response for Both Winter...  

NLE Websites -- All DOE Office Websites (Extended Search)

Demonstration of Automated Demand Response for Both Winter and Summer Events in Large Buildings in the Pacific Northwest Title Field Demonstration of Automated Demand Response for...

151

Field Testing of Automated Demand Response for Integration of...  

NLE Websites -- All DOE Office Websites (Extended Search)

Field Testing of Automated Demand Response for Integration of Renewable Resources in California's Ancillary Services Market for Regulation Products Title Field Testing of Automated...

152

Fast Automated Demand Response to Enable the Integration of Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

Fast Automated Demand Response to Enable the Integration of Renewable Resources Title Fast Automated Demand Response to Enable the Integration of Renewable Resources Publication...

153

Open Automated Demand Response Communications Specification (Version 1.0)  

E-Print Network (OSTI)

and Techniques for Demand Response. May 2007. LBNL-59975.tofacilitateautomating demandresponseactionsattheInteroperable Automated Demand Response Infrastructure,

Piette, Mary Ann

2009-01-01T23:59:59.000Z

154

Automated-Manual Transitions: Human Capabilities and Adaptive Cruise Control  

E-Print Network (OSTI)

TRANSIT AND HIGHWAYS Automated-Manual Transitions: HumanOF CALIFORNIA, BERKELEY Automated-Manual Transitions: HumanSuch systems will supplant manual controls during certain

Barton, Joseph E.; Cohn, Theodore E.; Nguyen, Khoi M.; Nguyen, Tieuvi; Toyofuku, Natsuko

2004-01-01T23:59:59.000Z

155

Mixed Manual/Semi-Automated Traffic: A Macroscopic Analysis  

E-Print Network (OSTI)

of Traffic Flow with Mixed Manual and Semi- Automatedof Mixed Semi-Automated/Manual Traffic, SAE Technical Paperof traffic flow with mixed manual and semi- automated

Bose, Arnab; Ioannou, Petros

2001-01-01T23:59:59.000Z

156

Computer Measurement and Automation System for Gas-fired Heating...  

NLE Websites -- All DOE Office Websites (Extended Search)

Computer Measurement and Automation System for Gas-fired Heating Furnace Title Computer Measurement and Automation System for Gas-fired Heating Furnace Publication Type Journal...

157

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

5: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013...

158

ISA Approves Standard for Wireless Automation in Process Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the...

159

Solar Automation Inc | Open Energy Information  

Open Energy Info (EERE)

Inc Inc Jump to: navigation, search Name Solar Automation Inc Place Albuquerque, New Mexico Zip NM 8110 Product Produces manufacturing equipment for PV cells. References Solar Automation Inc[1] LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Solar Automation Inc is a company located in Albuquerque, New Mexico . References ↑ "Solar Automation Inc" Retrieved from "http://en.openei.org/w/index.php?title=Solar_Automation_Inc&oldid=351247" Categories: Clean Energy Organizations Companies Organizations Stubs What links here Related changes Special pages Printable version Permanent link Browse properties About us Disclaimers Energy blogs Linked Data Developer services

160

Dynamic Whitelist Generation for Automated Response  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Methodology Methodology Results Dynamic Whitelist Generation for Automated Response Chris Strasburg, Josh Adams Ames Laboratory, US DOE cstras@ameslab.gov, jadams@ameslab.gov The Ames Laboratory, US DOE 1 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results Outline 1 Introduction About Ames Laboratory Motivation 2 Methodology Data Classifiers Experiments 3 Results The Ames Laboratory, US DOE 2 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Physical Environment The Ames Laboratory, US DOE 3 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames Laboratory Motivation Ames Network Environment The Ames Laboratory, US DOE 4 Dynamic Whitelist Generation for Automated Response Introduction Methodology Results About Ames

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Take an integrated approach to refinery automation  

Science Conference Proceedings (OSTI)

An integrated approach to designing refinery automation systems is essential to guaranteeing systems compatibility and maximizing benefits. Several aspects of implementing integrated refinery automation should be considered early in the project. Many refineries have major parts of their business automated, starting from corporate planning at the higher level, down to DCS and field instrumentation. A typical refinery automation system architecture of the mid-eighties is shown. Automation systems help refineries improve their business through: Rationalization of man power; Increased throughputs; Reduced give-away; Reduced energy consumption; Better response to market demands and changes; Effective use of offsite areas through scheduling and automatic line-up systems; Reduced losses; and Decision support systems.

Wadi, I. (Abu Dhabi National Oil Co. (United Arab Emirates))

1993-09-01T23:59:59.000Z

162

AUTOMATING GROUNDWATER SAMPLING AT HANFORD  

Science Conference Proceedings (OSTI)

Until this past October, Fluor Hanford managed Hanford's integrated groundwater program for the U.S. Department of Energy (DOE). With the new contract awards at the Site, however, the CH2M HILL Plateau Remediation Company (CHPRC) has assumed responsibility for the groundwater-monitoring programs at the 586-square-mile reservation in southeastern Washington State. These programs are regulated by the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response Compensation and Liability Act (CERCLA). The purpose of monitoring is to track existing groundwater contamination from past practices, as well as other potential contamination that might originate from RCRA treatment, storage, and disposal (TSD) facilities. An integral part of the groundwater-monitoring program involves taking samples of the groundwater and measuring the water levels in wells scattered across the site. More than 1,200 wells are sampled each year. Historically, field personnel or 'samplers' have been issued pre-printed forms that have information about the well(s) for a particular sampling evolution. This information is taken from the Hanford Well Information System (HWIS) and the Hanford Environmental Information System (HEIS)--official electronic databases. The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and the collected information was posted onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. This is a pilot project for automating this tedious process by providing an electronic tool for automating water-level measurements and groundwater field-sampling activities. The automation will eliminate the manual forms and associated data entry, improve the accuracy of the information recorded, and enhance the efficiency and sampling capacity of field personnel. The goal of the effort is to eliminate 100 percent of the manual input to the database(s) and replace the management of paperwork by the field and clerical personnel with an almost entirely electronic process. These activities will include the following: scheduling the activities of the field teams, electronically recording water-level measurements, electronically logging and filing Groundwater Sampling Reports (GSR), and transferring field forms into the site-wide Integrated Document Management System (IDMS).

CONNELL CW; HILDEBRAND RD; CONLEY SF; CUNNINGHAM DE

2009-01-16T23:59:59.000Z

163

Automated Fresnel lens tester system  

DOE Green Energy (OSTI)

An automated data collection system controlled by a desktop computer has been developed for testing Fresnel concentrators (lenses) intended for solar energy applications. The system maps the two-dimensional irradiance pattern (image) formed in a plane parallel to the lens, whereas the lens and detector assembly track the sun. A point detector silicon diode (0.5-mm-dia active area) measures the irradiance at each point of an operator-defined rectilinear grid of data positions. Comparison with a second detector measuring solar insolation levels results in solar concentration ratios over the image plane. Summation of image plane energies allows calculation of lens efficiencies for various solar cell sizes. Various graphical plots of concentration ratio data help to visualize energy distribution patterns.

Phipps, G.S.

1981-07-01T23:59:59.000Z

164

Automated cleaning of electronic components  

SciTech Connect

Environmental and operator safety concerns are leading to the elimination of trichloroethylene and chlorofluorocarbon solvents in cleaning processes that remove rosin flux, organic and inorganic contamination, and particulates from electronic components. Present processes depend heavily on these solvents for manual spray cleaning of small components and subassemblies. Use of alternative solvent systems can lead to longer processing times and reduced quality. Automated spray cleaning can improve the quality of the cleaning process, thus enabling the productive use of environmentally conscious materials, while minimizing personnel exposure to hazardous materials. We describe the development of a prototype robotic system for cleaning electronic components in a spray cleaning workcell. An important feature of the prototype system is the capability to generate the robot paths and motions automatically from the CAD models of the part to be cleaned, and to embed cleaning process knowledge into the automatically programmed operations.

Drotning, W.; Meirans, L.; Wapman, W.; Hwang, Y.; Koenig, L.; Petterson, B.

1994-07-01T23:59:59.000Z

165

Magnetic Resonance Connectome Automated Pipeline  

E-Print Network (OSTI)

This manuscript presents a novel, tightly integrated pipeline for estimating a connectome, which is a comprehensive description of the neural circuits in the brain. The pipeline utilizes magnetic resonance imaging (MRI) data to produce a high-level estimate of the structural connectivity in the human brain. The Magnetic Resonance Connectome Automated Pipeline (MRCAP) is efficient and its modular construction allows researchers to modify algorithms to meet their specific requirements. The pipeline has been validated and over 200 connectomes have been processed and analyzed to date. This tool enables the prediction and assessment of various cognitive covariates, and this research is applicable to a variety of domains and applications. MRCAP will enable MR connectomes to be rapidly generated to ultimately help spur discoveries about the structure and function of the human brain.

Gray, William R; Vogelstein, Joshua T; Landman, Bennett A; Prince, Jerry L; Vogelstein, R Jacob

2011-01-01T23:59:59.000Z

166

Process development for automated solar cell and module production. Task 4: automated array assembly  

DOE Green Energy (OSTI)

The scope of work under this contract involves specifying a process sequence which can be used in conjunction with automated equipment for the mass production of solar cell modules for terrestrial use. This process sequence is then critically analyzed from a technical and economic standpoint to determine the technological readiness of each process step for implementation. The process steps are ranked according to the degree of development effort required and according to their significance to the overall process. Under this contract the steps receiving analysis were: back contact metallization, automated cell array layup/interconnect, and module edge sealing. For automated layup/interconnect both hard automation and programmable automation (using an industrial robot) were studied. The programmable automation system was then selected for actual hardware development. Economic analysis using the SAMICS system has been performed during these studies to assure that development efforts have been directed towards the ultimate goal of price reduction. Details are given. (WHK)

Hagerty, J.J.

1980-06-30T23:59:59.000Z

167

Fueling Robot Automates Hydrogen Hose Reliability Testing (Fact Sheet)  

SciTech Connect

Automated robot mimics fueling action to test hydrogen hoses for durability in real-world conditions.

Harrison, K.

2014-01-01T23:59:59.000Z

168

Automated container transport system between inland port and terminals  

Science Conference Proceedings (OSTI)

In this article we propose a new concept called automated container transportation system between inland port and terminals (ACTIPOT) which involves the use of automated trucks to transfer containers between an inland port and container terminals. The ... Keywords: Automated container transportation system, Petri nets, automated truck, supervisory control, vehicle control

Jianlong Zhang; Petros A. Ioannou; Anastasios Chassiakos

2006-04-01T23:59:59.000Z

169

Guidelines for Implementing Substation Automation Using UCA-SA (Utility Communications Architecture-Substation Automation)  

Science Conference Proceedings (OSTI)

This report provides guidelines for substation engineers, information technologists, and utility managers on the information issues related to substation automation, in particular when UCA-SA (Utility Communications Architecture Substation Automation IEC61850) standards are used. Substation automation is a new challenge for the utility industry, and these guidelines provide the overall vision as well as the specific steps that should be taken for successful implementation of this new enabling cap...

2003-11-11T23:59:59.000Z

170

Participation through Automation: Fully Automated Critical Peak Pricing in Commercial Buildings  

E-Print Network (OSTI)

2004. Working Group 2 Demand Response Evaluation Program2006. Au tomated Demand Response Control Strategies inrequired. Figure 2. Demand Response Automation Server and

Piette, Mary Ann; Watson, David S.; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

171

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

E-Print Network (OSTI)

ProjectCommittee135 CapacityBiddingProgram ClientandREPORT AUTOMATION OF CAPACITY BIDDING WITH AN AGGREGATORDevelopmentandTestingoftheCapacityBiddingProgramfor

Kiliccote, Sila

2011-01-01T23:59:59.000Z

172

Definition: Distribution Automation | Open Energy Information  

Open Energy Info (EERE)

Automation Automation Jump to: navigation, search Dictionary.png Distribution Automation DA is a family of technologies including sensors, processors, communication networks, and switches that can perform a number of distribution system functions depending on how they are implemented. Over the last 20 years, utilities have been applying DA to improve reliability, service quality and operational efficiency. More recently, DA is being applied to perform automatic switching, reactive power compensation coordination, or other feeder operations/control.[1] Related Terms sustainability, smart grid References ↑ https://www.smartgrid.gov/category/technology/distribution_automation [[Ca LikeLike UnlikeLike You and one other like this.One person likes this. Sign Up to see what your friends like.

173

Definition: Automated Distribution Circuit Switches | Open Energy  

Open Energy Info (EERE)

Circuit Switches Circuit Switches Jump to: navigation, search Dictionary.png Automated Distribution Circuit Switches Distribution circuit switches that can be operated automatically in response to control signals from local sensors, distribution automation systems, or grid control systems. Such switches can be installed as automated devices or existing equipment can be retrofitted with controls and communications. The degree of automation depends on the controls and communications system implemented. These switches can be opened or closed to isolate portions of a distribution circuit that has experienced a short circuit (fault), or must be taken out of service for maintenance or other operations. When used in combination, these switches can reroute power from other substations or nearby distribution circuits.[1]

174

LANL to certify automated influenza surveillance system  

NLE Websites -- All DOE Office Websites (Extended Search)

LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system LANL to certify automated influenza surveillance system A compact automated system for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases is a step closer to reality. January 31, 2011 Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy sources, to plasma physics and new materials. Los Alamos National Laboratory sits on top of a once-remote mesa in northern New Mexico with the Jemez mountains as a backdrop to research and innovation covering multi-disciplines from bioscience, sustainable energy

175

Mirle Automation Corporation | Open Energy Information  

Open Energy Info (EERE)

Mirle Automation Corporation Mirle Automation Corporation Jump to: navigation, search Name Mirle Automation Corporation Place Hsinchu, Taiwan Zip 30077 Sector Solar Product A Taiwan-based automation system integrators and related product manufacturers who have entered thin film solar cell manufacturing equipment business. Coordinates 24.69389°, 121.148064° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":24.69389,"lon":121.148064,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

176

Distributed Intelligent Automated Demand Response (DIADR) Building  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Distributed Intelligent Automated Demand Distributed Intelligent Automated Demand Response (DIADR) Building Management System Distributed Intelligent Automated Demand Response (DIADR) Building Management System The U.S. Department of Energy (DOE) is currently conducting research into distributed intelligent-automated demand response (DIADR) building management systems. Project Description This project aims to develop a DIADR building management system with intelligent optimization and control algorithms for demand management, taking into account a multitude of factors affecting cost including: Comfort Heating, ventilating, and air conditioning (HVAC) Lighting Other building systems Climate Usage and occupancy patterns. The key challenge is to provide the demand response the ability to address more and more complex building systems that include a variety of loads,

177

The Automated Tropical Cyclone Forecasting System (ATCF)  

Science Conference Proceedings (OSTI)

The U.S. Navy Automated Tropical Cyclone Forecasting System (ATCF) is an IBM-AT compatible software package developed for the Joint Typhoon Warning Center (JTWC), Guam. ATCF is designed to assist forecasters with the process of making tropical ...

Ronald J. Miller; Ann J. Schrader; Charles R. Sampson; Ted L. Tsui

1990-12-01T23:59:59.000Z

178

Nearly-automated metadata hierarchy creation  

Science Conference Proceedings (OSTI)

Currently, information architects create metadata category hierarchies manually. We present a nearly-automated approach for deriving such hierarchies, by converting the lexical hierarchy WordNet into a format that reflects the contents of a target ...

Emilia Stoica; Marti A. Hearst

2004-05-01T23:59:59.000Z

179

Robust Automated Quality Assurance of Radiosonde Temperatures  

Science Conference Proceedings (OSTI)

This paper presents a description of the fully automated quality-assurance (QA) procedures that are being applied to temperatures in the Integrated Global Radiosonde Archive (IGRA). Because these data are routinely used for monitoring variations ...

Imke Durre; Russell S. Vose; David B. Wuertz

2008-08-01T23:59:59.000Z

180

Automated Demand Response for Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Demand Response for Critical Peak Pricing Speaker(s): Naoya Motegi Date: June 9, 2005 - 12:00pm Location: Bldg. 90 California utilities have been exploring the use of...

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Automated Speech Recognition in air traffic control  

E-Print Network (OSTI)

Over the past few years, the technology and performance of Automated Speech Recognition (ASR) systems has been improving steadily. This has resulted in their successful use in a number of industrial applications. Motivated ...

Trikas, Thanassis

1987-01-01T23:59:59.000Z

182

Design automation for microfluidics-based biochips  

Science Conference Proceedings (OSTI)

Advances in microfluidics technology offer exciting possibilities in the realm of enzymatic analysis, DNA analysis, proteomic analysis involving proteins and peptides, immunoassays, implantable drug delivery devices, and environmental toxicity monitoring. ... Keywords: Microfluidics, biochips, design automation

Krishnendu Chakrabarty; Jun Zeng

2005-10-01T23:59:59.000Z

183

An Evaluation of Inspection Automation Tools  

Science Conference Proceedings (OSTI)

A key element in manufacturing quality software is the early detection of defects which can be fostered by inspection techniques. Inspections may be boosted by automated tools that help in various tasks during the whole inspection process. We present ...

Vesa Tenhunen; Jorma Sajaniemi

2002-06-01T23:59:59.000Z

184

Assessment of Wireless Technologies for Advanced Automation  

Science Conference Proceedings (OSTI)

The power industry is seeing a resurgence of interest in advanced automation and customer communications. A variety of wireless technologies are becoming available that could be used in advanced automation applications for utilities. However, decisions on physical media infrastructure should be made cautiously since use of these technologies may directly impact system performance, reliability, and long-term costs. This report is a preliminary analysis of some of the leading wireless technologies that are...

2007-12-20T23:59:59.000Z

185

Scientific Process Automation Improves Data Interaction  

SciTech Connect

This is an article written for the September 09 Scientific Computing magazine about the work of the Scientific Process Automation team of The U.S. Department of Energy (DOE) Scientific Discovery through Advanced Computing (SciDAC) program. The SPA team is focused on developing and deploying automated workflows for a variety of computational science domains. Scientific workflows are the formalization of a scientific process that is frequently and repetitively performed.

Critchlow, Terence J.

2009-09-30T23:59:59.000Z

186

Automated Parallel Capillary Electrophoretic System  

DOE Patents (OSTI)

An automated electrophoretic system is disclosed. The system employs a capillary cartridge having a plurality of capillary tubes. The cartridge has a first array of capillary ends projecting from one side of a plate. The first array of capillary ends are spaced apart in substantially the same manner as the wells of a microtitre tray of standard size. This allows one to simultaneously perform capillary electrophoresis on samples present in each of the wells of the tray. The system includes a stacked, dual carousel arrangement to eliminate cross-contamination resulting from reuse of the same buffer tray on consecutive executions from electrophoresis. The system also has a gel delivery module containing a gel syringe/a stepper motor or a high pressure chamber with a pump to quickly and uniformly deliver gel through the capillary tubes. The system further includes a multi-wavelength beam generator to generate a laser beam which produces a beam with a wide range of wavelengths. An off-line capillary reconditioner thoroughly cleans a capillary cartridge to enable simultaneous execution of electrophoresis with another capillary cartridge. The streamlined nature of the off-line capillary reconditioner offers the advantage of increased system throughput with a minimal increase in system cost.

Li, Qingbo (State College, PA); Kane, Thomas E. (State College, PA); Liu, Changsheng (State College, PA); Sonnenschein, Bernard (Brooklyn, NY); Sharer, Michael V. (Tyrone, PA); Kernan, John R. (Loganton, PA)

2000-02-22T23:59:59.000Z

187

Facility automation for retail facilities  

Science Conference Proceedings (OSTI)

This article will focus on retail chain stores with areas of 22,000 to 75,000 sq ft, but much of the article will apply to all retail stores independent of size. Typically, a store is serviced by 5 to 15 rooftop HVAC units with a total cooling capacity of 50 to 150 tons, depending on the floor area and geographic location. The interior lighting represents a load of 80 to 300 KW with three lighting levels--retail, stocking, and security or night. Most stores are located in strip centers, and therefore, the parking lot lighting is provided by the landlord, but each store does control and service its own sign lighting. Generally, the total load controlled by an FAS represents 130 to 450 KW with corresponding annual energy costs ranging from $65,000 to $200,000 (natural gas and electricity), depending on the size of the store and the local unit costs of energy. Historical utility data, electrical and mechanical drawings, site surveys, significant analyses of data, and most importantly, discussions with corporate facilities management personnel and store operations personnel provide the source for the development theory and sequence of operation of the design of the facility automation systems for retail stores. The three main goals of an FAS are: reduce utility operating costs, maintain comfort levels during occupied hours, reduce HVAC maintenance costs.

Ameduri, G. (Roth Bros., Inc., Youngstown, OH (United States). Facilities Automation Division)

1994-12-01T23:59:59.000Z

188

Open Automated Demand Response Technologies for Dynamic Pricing and Smart Grid  

E-Print Network (OSTI)

for Automated Demand Response in Commercial Buildings. In2010. Open Automated Demand Response Dynamic Pricing2009. Open Automated Demand Response Communications

Ghatikar, Girish

2010-01-01T23:59:59.000Z

189

Automated array assembly. Final report  

DOE Green Energy (OSTI)

Three main sections are included which describe a general technology assessment and manufacturing cost analysis; a near-term (1982) factory design; and the results of an experimental production study for the large-scale production of flat-panel silicon solar-cell arrays. The results of an extensive study and detailed analysis of technologies which could be related to array module manufacturing are presented. From this study, several manufacturing sequences emerge as candidates for satisfying the ERDA/JPL cost goal of $0.50/W selling price in 1986. A minimum manufacturing cost was found in a highly automated line of $0.30/W assuming the silicon is free. The panels are of a double-glass construction and are based on round wafers. Screen-printed silver has been used as the metallization with a spray-coated antireflection (AR) layer. The least expensive junction-formation technology appears to be ion implantation;however, several other technologies also may be used with very little cost penalty as described. An interim 1982 factory is described for the large-scale production of silicon solar-cell array modules. The boundary conditions for this design are the use of Czochralski silicon crystals and $25/kg polycrystalline silicon. The objective is a large-scale production facility to meet an intermediate ERDA cost goal of $2.00/W in 1982. A 6-month experimental production study of the elements of low-cost solar-cell manufacturing sequences is described as an outgrowth of the cost and manufacturing studies. This program consisted of three parts: an experimental production line study of the major variables associated with the fabrication of 3-in.-diameter silicon solar cells; a study of thick-film screen-printed silver metallization; and panel design and assembly development. (WHK)

D'Aiello, R.V.

1977-12-01T23:59:59.000Z

190

Automated array assembly. Annual report  

DOE Green Energy (OSTI)

The goal of the ERDA/JPL LSSA program of $0.50/W selling price for array modules in 1986 turns out to have been remarkably appropriate. An extensive and detailed analysis of technologies which could be related to array module manufacturing was completed and a minimum manufacturing cost in a highly automated line of $0.30/W was found assuming the silicon is free. The panels are of a double glass construction and are based on round wafers. Screen printed silver has been used as the metallization with a spray-coated AR layer. The least expensive junction formation technology appears to be ion implantation; however, several other technologies also may be used with very little cost penalty as described. Based on the required investment, a profit of $0.05/W appears reasonable. If silicon wafers are available at a price of $20 to 40/M/sup 2/, a selling price for these array modules of $0.50 to 0.66/W is projected. An analysis of the impact of factory size has been made. For a production level of 500 MW/yr, the price above is derived. For comparison, a factory processing 50 MW/yr using the same technology would sell modules for $0.54/W to $0.70/W. An analysis of the impact of wafer size indicates that with traditional metallization and panel designs there is no advantage in increasing wafer size from 3 in. to 5 in., and, in fact, there is some penalty (10% in $/W) due to increasedmetallization costs and reduced system performance. There is a premium placed on high efficiency due to its impact, not only on array module cost, but on system cost. For the near term goals of this program, wafers cut from single-crystal material seem the most likely sheet configuration.

Williams, B.F.

1977-05-01T23:59:59.000Z

191

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. ISA Approves Standard for Wireless Automation in Process Control Applications More Documents & Publications DOE/OE National SCADA Test Bed Fiscal Year 2009 Work Plan Wireless System Considerations When Implementing NERC Critical Infrastructure Protection Standards Control Systems Security Standards: Accomplishments And Impacts

192

Automated welding of nuclear piping systems  

SciTech Connect

Automated welding, or more broadly, automatic and mechanized welding processes, has found a role in nuclear power plant fabrication. This role has expanded from a rare or isolated application to relatively frequent usage in the last five years. More importantly, it is envisioned that use of automated welding will be increasing at an accelerated rate as broader exposure to this technology is achieved. Among the various pipe welding processes, the only one which has been developed for mechanized and automated nuclear piping welding is the gas tungsten arc welding (GTAW) process. This development has occurred in the past 10 to 15 years through the steady improvement and commmercialization of orbiting welding heads. Improvements in GTAW power supplies, control systems, etc., have aided this commercialization but the main element and pacing item has been the welding head itself. In order to review the status of mechanized and automated nuclear pipe welding, the topics of basic process equipment, joint design, fit-up requirements, welding parameters, and producibility will be addressed. In addition, anticipated future developments in automated systems will be discussed.

Hood, D.W.

1979-01-01T23:59:59.000Z

193

Automated Sorting of Transuranic Waste  

SciTech Connect

The HANDSS-55 Transuranic Waste Sorting Module is designed to sort out items found in 55-gallon drums of waste as determined by an operator. Innovative imaging techniques coupled with fast linear motor-based motion systems and a flexible end-effector system allow the operator to remove items from the waste stream by a touch of the finger. When all desired items are removed from the waste stream, the remaining objects are automatically moved to a repackaging port for removal from the glovebox/cell. The Transuranic Waste Sorting Module consists of 1) a high accuracy XYZ Stereo Measurement and Imaging system, 2) a vibrating/tilting sorting table, 3) an XY Deployment System, 4) a ZR Deployment System, 5) several user-selectable end-effectors, 6) a waste bag opening system, 7) control and instrumentation, 8) a noncompliant waste load-out area, and 9) a Human/Machine Interface (HMI). The system is modular in design to accommodate database management tools, additional load-out ports, and other enhancements. Manually sorting the contents of a 55-gallon drum takes about one day per drum. The HANDSS-55 Waste Sorting Module is designed to significantly increase the throughput of this sorting process by automating those functions that are strenuous and tiresome for an operator to perform. The Waste Sorting Module uses the inherent ability of an operator to identify the items that need to be segregated from the waste stream and then, under computer control, picks that item out of the waste and deposits it in the appropriate location. The operator identifies the object by locating the visual image on a large color display and touches the image on the display with his finger. The computer then determines the location of the object, and performing a highspeed image analysis determines its size and orientation, so that a robotic gripper can be deployed to pick it up. Following operator verification by voice or function key, the object is deposited into a specified location.

Shurtliff, Rodney Marvin

2001-03-01T23:59:59.000Z

194

Definition: Automated Capacitors | Open Energy Information  

Open Energy Info (EERE)

Capacitors Capacitors Jump to: navigation, search Dictionary.png Automated Capacitors Capacitors can increase the voltage on a distribution circuit by providing reactive power (often referred to as volt-amperes-reactive or VArs). Capacitor banks are switched in discrete steps, either manually, or in response to the voltage at the location where they are connected; typically, distribution capacitor banks are switched in a single step. If the voltage falls too far below the set point, the capacitor is switched in to raise the voltage. If the voltage rises too high above the set point, the capacitor is switched out to lower the voltage. Automated capacitors can be switched in coordination with other voltage control devices with signals from local sensors, distribution automation systems, or grid

195

AIS Automation Dresden | Open Energy Information  

Open Energy Info (EERE)

AIS Automation Dresden AIS Automation Dresden Jump to: navigation, search Name AIS Automation Dresden Place Dresden, Germany Zip D-01237 Product Provides software for industrial process control for the semiconductor and photovoltaic industries. Coordinates 51.053645°, 13.740815° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":51.053645,"lon":13.740815,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

196

Automated imaging system for single molecules  

SciTech Connect

There is provided a high throughput automated single molecule image collection and processing system that requires minimal initial user input. The unique features embodied in the present disclosure allow automated collection and initial processing of optical images of single molecules and their assemblies. Correct focus may be automatically maintained while images are collected. Uneven illumination in fluorescence microscopy is accounted for, and an overall robust imaging operation is provided yielding individual images prepared for further processing in external systems. Embodiments described herein are useful in studies of any macromolecules such as DNA, RNA, peptides and proteins. The automated image collection and processing system and method of same may be implemented and deployed over a computer network, and may be ergonomically optimized to facilitate user interaction.

Schwartz, David Charles; Runnheim, Rodney; Forrest, Daniel

2012-09-18T23:59:59.000Z

197

Verified hybrid controllers for automated vehicles  

E-Print Network (OSTI)

Abstract The objective of an Automated Highway System (AHS) is to increase the safety and throughput of the existing highway infrastructure by introducing traffic automation. AHS is an example of a large scale, multiagent complex dynamical system and is ideally suited for a hierarchical hybrid controller. We discuss the design of safe and efficient hybrid controllers for regulation of vehicles on an AHS. We use game theoretic techniques to deal with the multiagent and multiobjective nature of the problem. The result is a hybrid controller that by design guarantees safety, without the need for further verification. The calculations also provide an upper bound on the performance that can be expected in terms of throughput at various levels of centralization. Index Terms Automated highway systems, game theory, safety. I.

John Lygeros; Datta N. Godbole; Shankar Sastry

1998-01-01T23:59:59.000Z

198

Bar-code automated waste tracking system  

Science Conference Proceedings (OSTI)

The Bar-Code Automated Waste Tracking System was designed to be a site-Specific program with a general purpose application for transportability to other facilities. The system is user-friendly, totally automated, and incorporates the use of a drive-up window that is close to the areas dealing in container preparation, delivery, pickup, and disposal. The system features ``stop-and-go`` operation rather than a long, tedious, error-prone manual entry. The system is designed for automation but allows operators to concentrate on proper handling of waste while maintaining manual entry of data as a backup. A large wall plaque filled with bar-code labels is used to input specific details about any movement of waste.

Hull, T.E.

1994-10-01T23:59:59.000Z

199

NCWM 93 Annual Meeting  

Science Conference Proceedings (OSTI)

... Jennifer Nuckolls Siemens Energy & Automation, Inc. ... July 13 - 17, 2008 Sheraton Burlington Hotel Burlington, VT Attendee List ...

2011-10-26T23:59:59.000Z

200

Beyond Commissioning: The Role of Automation  

Science Conference Proceedings (OSTI)

This article takes a brief look at the benefits of commissioning and describes a vision of the future where most of the objectives of commissioning will be accomplished automatically by capabilities built into the building systems themselves. Commissioning will become an activity that's performed continuously rather than periodically, and only repairs requiring replacement or overhaul of equipment will require manual intervention. The article then identifies some of the technologies that will be needed to realize this vision and ends with a call for all involved in the enterprise of building commissioning and automation to embrace and dedicate themselves to a future of automated commissioning.

Brambley, Michael R.; Katipamula, Srinivas

2005-02-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Home Automation in the Wild: Challenges and Opportunities  

E-Print Network (OSTI)

automation in two groups: 1) Do-it-yourselfers (DIY) who have installed automation themselves and 2 purposes [33]. To compare and contrast these two groups, we recruited both DIY and Outsourced households

Rajamani, Sriram K.

202

Automated Demand Response Strategies and Commissioning Commercial Building Controls  

E-Print Network (OSTI)

4 9 . Piette et at Automated Demand Response Strategies andDynamic Controls for Demand Response in New and ExistingFully Automated Demand Response Tests in Large Facilities"

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-01-01T23:59:59.000Z

203

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

This paper introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a bu er of 8 batteries in a novel dual-drum structure that enables a "hot" battery ...

Toksoz, Tuna

204

Automated and human proofs in general mathematics: an initial comparison  

Science Conference Proceedings (OSTI)

First-order translations of large mathematical repositories allow discovery of new proofs by automated reasoning systems. Large amounts of available mathematical knowledge can be re-used by combined AI/ATP systems, possibly in unexpected ways. But automated ...

Jesse Alama; Daniel Khlwein; Josef Urban

2012-03-01T23:59:59.000Z

205

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

Report 2009. Open Automated Demand Response Communicationsand Techniques for Demand Response. California Energyand S. Kiliccote. Estimating Demand Response Load Impacts:

Kiliccote, Sila

2010-01-01T23:59:59.000Z

206

AN UPDATE ON THE DEVELOPMENT OF AN AUTOMATED ...  

Science Conference Proceedings (OSTI)

... An unconventional automated lipidomics approach (1) was designed by applying a liquid chromatography autosampler to draw up discrete ...

207

SYSTEMS AND METHODS FOR THE AUTONOMOUS CONTROL, AUTOMATED ...  

systems and methods for the autonomous control, automated guidance, and global coordination of moving process machinery united states patent application

208

Performance of Integrated Systems of Automated Roller Shade Systems...  

NLE Websites -- All DOE Office Websites (Extended Search)

032011 Keywords automated roller shade systems, daylight responsive dimming systems, daylighting, Integrated systems, photoelectric controls Abstract Daylight responsive...

209

Use of Automated External Defibrillators  

SciTech Connect

In an effort to improve survival from cardiac arrest, the American Heart Association (AHA) has promoted the Chain of Survival concept, describing a sequence of prehospital steps that result in improved survival after sudden cardiac arrest. These interventions include immediate deployment of emergency medical services, prompt cardiopulmonary resuscitation, early defibrillation when indicated, and early initiation of advanced medical care. Early defibrillation has emerged as the most important intervention with survival decreasing by 10% with each minute of delay in defibrillation. Ventricular Fibrillation (VF) is a condition in which there is uncoordinated contraction of the heart cardiac muscle of the ventricles in the heart, making them tremble rather than contract properly. VF is a medical emergency and if the arrhythmia continues for more than a few seconds, blood circulation will cease, and death can occur in a matter of minutes. During VF, contractions of the heart are not synchronized, blood flow ceases, organs begin to fail from oxygen deprivation and within 10 minutes, death will occur. When VF occurs, the victim must be defibrillated in order to establish the hearts normal rhythm. On average, the wait for an ambulance in populated areas of the United States is about 11 minutes. In view of these facts, the EFCOG Electrical Safety Task Group initiated this review to evaluate the potential value of deployment and use of automated external defibrillators (AEDs) for treatment of SCA victims. This evaluation indicates the long term survival benefit to victims of SCA is high if treated with CPR plus defibrillation within the first 3-5 minutes after collapse. According to the American Heart Association (AHA), survival rates as high as 74% are possible if treatment and defibrillation is performed in the first 3 minutes. In contrast survival rates are only 5% where no AED programs have been established to provide prompt CPR and defibrillation. ["CPR statistics" American Heart Association] Early intervention with both CPR and defibrillation can result in high long-term survival rates for SCA, as demonstrated by a study investigating the beneficial effects of AED devices at Chicagos OHare and Midway airports. The American Medical Association (AMA) advocates the widespread placement of AEDs [AMA Res. 413, A-02; Res. 424, A-04]; supports increasing government and industry funding for the purchase of AED devices; and encourages the American public to become trained in CPR and the use of AEDs. Some states, including Maryland, have enacted legislation requiring AED devices and a certified responder be available at high school and school-sponsored athletic events due the risk of SCA to athletes (the most common cause of death in young athletes). Ensuring AED availability at Department of Energy (DOE) sites would serve as a means of preventative intervention for over 14,000 DOE employees and 193,000 contract workers. It is estimated 1 per 1,000 adults 35 years of age and older will experience SCA in a given year.

Gregory K Christensen

2009-02-01T23:59:59.000Z

210

Context and Structure in Automated Full-Text Information Access  

E-Print Network (OSTI)

Context and Structure in Automated Full-Text Information Access Marti A. Hearst Report No. UCB 94720 #12;#12;Context and Structure in Automated Full-Text Information Access by Marti A. Hearst B and Structure in Automated Full-Text Information Access Copyright c 1994 by Marti A. Hearst #12;In memory of my

Hearst, Marti

211

White Paper Series An Overview of Automated Enforcement  

E-Print Network (OSTI)

White Paper Series An Overview of Automated Enforcement Systems and Their Potential for Improving The following paper takes a widespread look at automated enforcement systems, specifically red-light cameras of drivers running red lights and speeding, the paper will define automated enforcement systems, the impact

North Carolina at Chapel Hill, University of

212

Automated Battery Swap and Recharge to Enable Persistent UAV Missions  

E-Print Network (OSTI)

Automated Battery Swap and Recharge to Enable Persistent UAV Missions Tuna Toksoz , Joshua Redding introduces a hardware platform for automated battery changing and charging for multiple UAV agents. The automated station holds a buffer of 8 batteries in a novel dual-drum structure that enables a "hot" battery

How, Jonathan P.

213

Steam Generator Automated Eddy Current Data Analysis: A Benchmarking Study  

Science Conference Proceedings (OSTI)

This benchmarking study informs utility nondestructive evaluation (NDE) engineers of the status of automating analysis of data from steam generator tube eddy current testing. Study results will contribute to a detailed plan for continuing development of automated data analysis system processes. One day, automated data analysis will provide utilities with a consistent, accurate, and cost-effective method of analyzing eddy current inspection data.

1998-12-16T23:59:59.000Z

214

Docking automation related technology, Phase 2 report  

SciTech Connect

This report generalizes the progress for Phase II of the Docking Automated Related Technologies task component within the Modular Artillery Ammunition Delivery System (MAADS) technology demonstrator of the Future Armored Resupply Vehicle (FARV) project. This report also covers development activity at Oak Ridge National Laboratory (ORNL) during the period from January to July 1994.

Jatko, W.B.; Goddard, J.S.; Gleason, S.S.; Ferrell, R.K.

1995-04-01T23:59:59.000Z

215

Apparatus for automated testing of biological specimens  

DOE Patents (OSTI)

An apparatus for performing automated testing of infections biological specimens is disclosed. The apparatus comprise a process controller for translating user commands into test instrument suite commands, and a test instrument suite comprising a means to treat the specimen to manifest an observable result, and a detector for measuring the observable result to generate specimen test results.

Layne, Scott P. (Los Angeles, CA); Beugelsdijk, Tony J. (Los Alamos, NM)

1999-01-01T23:59:59.000Z

216

Focus Windows: A Tool for Automated Provers ?  

E-Print Network (OSTI)

Focus Windows: A Tool for Automated Provers ? Florina Piroi Research Institute For Symbolic or understand the validity of a particular step. Focus windows were #12;rst introduced as a technique for proof the implementation and the use of the focus windows technique in the frame of the Theorema system [3]. One

217

Safe controllers design for industrial automation systems  

Science Conference Proceedings (OSTI)

The design of safe industrial controllers is one of the most important domains related to Automation Systems research. To support it, synthesis and analysis techniques are available. Among the analysis techniques, two of the most important are Simulation ... Keywords: Formal verification, Industrial systems behaviour modelling, Real-time systems, Safe controllers, Simulation

Jos Machado; Eurico Seabra; Jos C. Campos; Filomena Soares; Celina P. Leo

2011-05-01T23:59:59.000Z

218

Automated modeling of modular robotic configurations  

Science Conference Proceedings (OSTI)

This research presents an automated method to build kinematic and dynamic models for assembling modular components of modular robotic systems. By comparison with other approaches, the proposed method is applicable to any robotic configuration with serial, ... Keywords: Automatic modeling, Computer-aided design, Configuration design, Finite element method, Modular architecture, Modular robotic system, Reconfigurable robot

Z. M. Bi; W. A. Gruver; W. J. Zhang; S. Y. T. Lang

2006-12-01T23:59:59.000Z

219

Automated reasoning service for HOL light  

Science Conference Proceedings (OSTI)

HOL(y)Hammer is an AI/ATP service for formal (computer-understandable) mathematics encoded in the HOL Light system, in particular for the users of the large Flyspeck library. The service uses several automated reasoning systems combined with several ...

Cezary Kaliszyk, Josef Urban

2013-07-01T23:59:59.000Z

220

Honeywell Modular Automation System Computer Software Documentation  

Science Conference Proceedings (OSTI)

This document provides a Computer Software Documentation for a new Honeywell Modular Automation System (MAS) being installed in the Plutonium Finishing Plant (PFP). This system will be used to control new thermal stabilization furnaces in HA-211 and vertical denitration calciner in HC-230C-2.

CUNNINGHAM, L.T.

1999-09-27T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Toward automation in hearing aid design  

Science Conference Proceedings (OSTI)

In the manufacturing of customized medical prostheses, such as in-the-ear hearing aids, the design process often is dictated by a source template representing the anatomy of a patient and a set of work instructions representing the description of surface ... Keywords: Application, Automation, CAD, CAM, Expert systems, Feature recognition, Hearing aid design, Medical prostheses manufacturing, Modeling, Rule-based systems, Shape transformation

Konrad Sickel; Sajjad Baloch; Rupen Melkisetoglu; Vojtech Bubnik; Sergei Azernikov; Tong Fang

2011-12-01T23:59:59.000Z

222

Automation of Capacity Bidding with an Aggregator Using Open Automated Demand Response  

Science Conference Proceedings (OSTI)

This report summarizes San Diego Gas& Electric Company?s collaboration with the Demand Response Research Center to develop and test automation capability for the Capacity Bidding Program in 2007. The report describes the Open Automated Demand Response architecture, summarizes the history of technology development and pilot studies. It also outlines the Capacity Bidding Program and technology being used by an aggregator that participated in this demand response program. Due to delays, the program was not fully operational for summer 2007. However, a test event on October 3, 2007, showed that the project successfully achieved the objective to develop and demonstrate how an open, Web?based interoperable automated notification system for capacity bidding can be used by aggregators for demand response. The system was effective in initiating a fully automated demand response shed at the aggregated sites. This project also demonstrated how aggregators can integrate their demand response automation systems with San Diego Gas& Electric Company?s Demand Response Automation Server and capacity bidding program.

Kiliccote, Sila; Piette, Mary Ann

2008-10-01T23:59:59.000Z

223

Salsbury and Diamond: Automated Testing of HVAC Systems for Commissioning -1 -Automated Testing of HVAC Systems for Commissioning  

E-Print Network (OSTI)

and Diamond: Automated Testing of HVAC Systems for Commissioning - 1 - Automated Testing of HVAC Systems This paper describes an approach to the automation of the commissioning of HVAC systems. The approach of many HVAC systems is limited more by poor installation, commissioning, and maintenance than by poor

224

Sabbath Day Home Automation: "It's Like Mixing Technology and Religion"  

E-Print Network (OSTI)

We present a qualitative study of 20 American Orthodox Jewish families' use of home automation for religious purposes. These lead users offer insight into real-life, long-term experience with home automation technologies. We discuss how automation was seen by participants to contribute to spiritual experience and how participants oriented to the use of automation as a religious custom. We also discuss the relationship of home automation to family life. We draw design implications for the broader population, including surrender of control as a design resource, home technologies that support long-term goals and lifestyle choices, and respite from technology.

Woodruff, Allison; Foucault, Brooke

2007-01-01T23:59:59.000Z

225

Installation and Commissioning Automated Demand Response Systems  

Science Conference Proceedings (OSTI)

Demand Response (DR) can be defined as actions taken to reduce electric loads when contingencies, such as emergencies and congestion, occur that threaten supply-demand balance, or market conditions raise supply costs. California utilities have offered price and reliability DR based programs to customers to help reduce electric peak demand. The lack of knowledge about the DR programs and how to develop and implement DR control strategies is a barrier to participation in DR programs, as is the lack of automation of DR systems. Most DR activities are manual and require people to first receive notifications, and then act on the information to execute DR strategies. Levels of automation in DR can be defined as follows. Manual Demand Response involves a labor-intensive approach such as manually turning off or changing comfort set points at each equipment switch or controller. Semi-Automated Demand Response involves a pre-programmed demand response strategy initiated by a person via centralized control system. Fully-Automated Demand Response does not involve human intervention, but is initiated at a home, building, or facility through receipt of an external communications signal. The receipt of the external signal initiates pre-programmed demand response strategies. We refer to this as Auto-DR (Piette et. al. 2005). Auto-DR for commercial and industrial facilities can be defined as fully automated DR initiated by a signal from a utility or other appropriate entity and that provides fully-automated connectivity to customer end-use control strategies. One important concept in Auto-DR is that a homeowner or facility manager should be able to 'opt out' or 'override' a DR event if the event comes at time when the reduction in end-use services is not desirable. Therefore, Auto-DR is not handing over total control of the equipment or the facility to the utility but simply allowing the utility to pass on grid related information which then triggers facility defined and programmed strategies if convenient to the facility. From 2003 through 2006 Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) developed and tested a series of demand response automation communications technologies known as Automated Demand Response (Auto-DR). In 2007, LBNL worked with three investor-owned utilities to commercialize and implement Auto-DR programs in their territories. This paper summarizes the history of technology development for Auto-DR, and describes the DR technologies and control strategies utilized at many of the facilities. It outlines early experience in commercializing Auto-DR systems within PG&E DR programs, including the steps to configure the automation technology. The paper also describes the DR sheds derived using three different baseline methodologies. Emphasis is given to the lessons learned from installation and commissioning of Auto-DR systems, with a detailed description of the technical coordination roles and responsibilities, and costs.

Global Energy Partners; Pacific Gas and Electric Company; Kiliccote, Sila; Kiliccote, Sila; Piette, Mary Ann; Wikler, Greg; Prijyanonda, Joe; Chiu, Albert

2008-04-21T23:59:59.000Z

226

DAVIC - Distributed Energy Automation via Implicit Communication  

NLE Websites -- All DOE Office Websites (Extended Search)

DAVIC - Distributed Energy Automation via Implicit Communication DAVIC - Distributed Energy Automation via Implicit Communication Speaker(s): Peter Palensky Date: January 22, 2008 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu The electricity grid is seen as a wide-area distributed process, determined by its sub-processes - in our case the loads and distributed generation. Network-based coordination needs to be done very carefully and properly timed to avoid instabilities. Luckily, every point of the grid has the same grid frequency and the same time. Integrating these two trivial things (implicit communication) into one consistent communication model might complement a low-quality (explicit) best-effort communication channel (e.g. Internet, GPRS) for real time applications. A simulation shall clarify how

227

home automation | OpenEI Community  

Open Energy Info (EERE)

91 91 Varnish cache server Home Groups Community Central Green Button Applications Developer Utility Rate FRED: FRee Energy Database More Public Groups Private Groups Features Groups Blog posts Content Stream Documents Discussions Polls Q & A Events Notices My stuff Energy blogs 429 Throttled (bot load) Error 429 Throttled (bot load) Throttled (bot load) Guru Meditation: XID: 2142285591 Varnish cache server home automation Home Graham7781's picture Submitted by Graham7781(2002) Super contributor 23 January, 2013 - 13:57 The Consumer Electronics Show round-up CES electronics home automation Las Vegas OpenEI Smart Grid Every January, Las Vegas hosts the Consumer Electronics Show. The CES is the world's largest technology-related trade show. The highlights of this year's show were OLED TVs, ultra-thin laptops,

228

Definition: Automated Voltage Regulators | Open Energy Information  

Open Energy Info (EERE)

Regulators Regulators Jump to: navigation, search Dictionary.png Automated Voltage Regulators Voltage regulators are transformers that can increase or decrease the voltage on a distribution circuit to help keep the voltage within a pre-determined band. Unlike capacitor banks, voltage regulators cannot adjust power factor. These devices typically monitor the voltage at the location where they are connected, and compare it to a programmed set point. If the voltage deviates too far from the set point, the voltage regulator can increase or decrease its output voltage by moving the tap on the secondary side up or down. An automated voltage regulator can operate with remote control signals, or in concert with other area voltage control devices, to help regulate distribution voltage in a coordinated fashion.

229

Automated Hydroforming of Seamless Superconducting RF Cavity  

SciTech Connect

We are studying the possibility of automated hydroforming process for seamless superconducting RF cavities. Preliminary hydroforming tests of three-cell cavities from seamless tubes made of C1020 copper have been performed. The key point of an automated forming is to monitor and strictly control some parameters such as operation time, internal pressure and material displacements. Especially, it is necessary for our studies to be able to control axial and radial deformation independently. We plan to perform the forming in two stages to increase the reliability of successful forming. In the first stage hydroforming by using intermediate constraint dies, three-cell cavities were successfully formed in less than 1 minute. In parallel, we did elongation tests on cavity-quality niobium and confirmed that it is possible to achieve an elongation of >64% in 2 stages that is required for our forming of 1.3 GHz cavities.

Nagata, Tomohiko [ULVAC, Inc.; Shinozawa, Seiichi [ULVAC, Inc.; Abe, Noriyuki [ULVAC, Inc.; Nagakubo, Junki [ULVAC, Inc.; Murakami, Hirohiko [ULVAC, Inc.; Tajima, Tsuyoshi [Los Alamos National Laboratory; Inoue, Hitoshi [High Energy Accelerator Research Organization, KEK; Yamanaka, Masashi [High Energy Accelerator Research Organization, KEK; Ueno, Kenji [High Energy Accelerator Research Organization, KEK

2012-07-31T23:59:59.000Z

230

Automation impact study of Army Training Management  

SciTech Connect

The main objectives of this impact study were to identify the potential cost savings associated with automated Army Training Management (TM), and to perform a cost-benefit analysis for an Army-wide automated TM system. A subsidiary goal was to establish baseline data for an independent evaluation of a prototype Integrated Training Management System (ITMS), to be tested in the fall of 1988. A structured analysis of TM doctrine was performed for comparison with empirical data gathered in a job analysis survey of selected units of the 9ID (MTZ) at Ft. Lewis, Washington. These observations will be extended to other units in subsequent surveys. The survey data concerning staffing levels and amount of labor expended on eight distinct TM tasks were analyzed in a cost effectiveness model. The main results of the surveys and cost effectiveness modelling are summarized. 18 figs., 47 tabs.

Sanquist, T.F.; Schuller, C.R.; McCallum, M.C.; Underwood, J.A.; Bettin, P.J.; King, J.L.; Melber, B.D.; Hostick, C.J.; Seaver, D.A.

1988-01-01T23:59:59.000Z

231

Flow through electrode with automated calibration  

DOE Patents (OSTI)

The present invention is an improved automated flow through electrode liquid monitoring system. The automated system has a sample inlet to a sample pump, a sample outlet from the sample pump to at least one flow through electrode with a waste port. At least one computer controls the sample pump and records data from the at least one flow through electrode for a liquid sample. The improvement relies upon (a) at least one source of a calibration sample connected to (b) an injection valve connected to said sample outlet and connected to said source, said injection valve further connected to said at least one flow through electrode, wherein said injection valve is controlled by said computer to select between said liquid sample or said calibration sample. Advantages include improved accuracy because of more frequent calibrations, no additional labor for calibration, no need to remove the flow through electrode(s), and minimal interruption of sampling.

Szecsody, James E [Richland, WA; Williams, Mark D [Richland, WA; Vermeul, Vince R [Richland, WA

2002-08-20T23:59:59.000Z

232

A Modular Architecture for Building Automation Systems  

E-Print Network (OSTI)

The deployment of building automation systems (BAS) allows to increase comfort, safety and security and to reduce operational cost. Today such systems typically follow a two-layered hierarchical approach. While control networks interconnect distributed sensors, actuators and controllers, a backbone provides the necessary infrastructure for management tasks hosted by configuration and management devices. In addition, devices interconnecting the control network with the backbone and the backbone with further networks (e.g., the Internet) play a strategic role. All BAS devices contributing to a particular functionality differ in their requirements for hardware. This paper discusses requirements for devices used in the building automation domain and presents our work in progress to assemble platforms with different purposes relying on a modular architecture. 1

Wolfgang Granzer; Wolfgang Kastner; Georg Neugschw; Fritz Praus

2006-01-01T23:59:59.000Z

233

Algorithms to Automate LCLS Undulator Tuning  

Science Conference Proceedings (OSTI)

Automation of the LCLS undulator tuning offers many advantages to the project. Automation can make a substantial reduction in the amount of time the tuning takes. Undulator tuning is fairly complex and automation can make the final tuning less dependent on the skill of the operator. Also, algorithms are fixed and can be scrutinized and reviewed, as opposed to an individual doing the tuning by hand. This note presents algorithms implemented in a computer program written for LCLS undulator tuning. The LCLS undulators must meet the following specifications. The maximum trajectory walkoff must be less than 5 {micro}m over 10 m. The first field integral must be below 40 x 10{sup -6} Tm. The second field integral must be below 50 x 10{sup -6} Tm{sup 2}. The phase error between the electron motion and the radiation field must be less than 10 degrees in an undulator. The K parameter must have the value of 3.5000 {+-} 0.0005. The phase matching from the break regions into the undulator must be accurate to better than 10 degrees. A phase change of 113 x 2{pi} must take place over a distance of 3.656 m centered on the undulator. Achieving these requirements is the goal of the tuning process. Most of the tuning is done with Hall probe measurements. The field integrals are checked using long coil measurements. An analysis program written in Matlab takes the Hall probe measurements and computes the trajectories, phase errors, K value, etc. The analysis program and its calculation techniques were described in a previous note. In this note, a second Matlab program containing tuning algorithms is described. The algorithms to determine the required number and placement of the shims are discussed in detail. This note describes the operation of a computer program which was written to automate LCLS undulator tuning. The algorithms used to compute the shim sizes and locations are discussed.

Wolf, Zachary

2010-12-03T23:59:59.000Z

234

Automated Methods for Multiplexed Pathogen Detection  

Science Conference Proceedings (OSTI)

Detection of pathogenic microorganisms in environmental samples is a difficult process. Concentration of the organisms of interest also co-concentrates inhibitors of many end-point detection methods, notably, nucleic acid methods. In addition, sensitive, highly multiplexed pathogen detection continues to be problematic. The primary function of the BEADS (Biodetection Enabling Analyte Delivery System) platform is the automated concentration and purification of target analytes from interfering substances, often present in these samples, via a renewable surface column. In one version of BEADS, automated immunomagnetic separation (IMS) is used to separate cells from their samples. Captured cells are transferred to a flow-through thermal cycler where PCR, using labeled primers, is performed. PCR products are then detected by hybridization to a DNA suspension array. In another version of BEADS, cell lysis is performed, and community RNA is purified and directly labeled. Multiplexed detection is accomplished by direct hybridization of the RNA to a planar microarray. The integrated IMS/PCR version of BEADS can successfully purify and amplify 10 E. coli O157:H7 cells from river water samples. Multiplexed PCR assays for the simultaneous detection of E. coli O157:H7, Salmonella, and Shigella on bead suspension arrays was demonstrated for the detection of as few as 100 cells for each organism. Results for the RNA version of BEADS are also showing promising results. Automation yields highly purified RNA, suitable for multiplexed detection on microarrays, with microarray detection specificity equivalent to PCR. Both versions of the BEADS platform show great promise for automated pathogen detection from environmental samples. Highly multiplexed pathogen detection using PCR continues to be problematic, but may be required for trace detection in large volume samples. The RNA approach solves the issues of highly multiplexed PCR and provides ''live vs. dead'' capabilities. However, sensitivity of the method will need to be improved for RNA analysis to replace PCR.

Straub, Tim M.; Dockendorff, Brian P.; Quinonez-Diaz, Maria D.; Valdez, Catherine O.; Shutthanandan, Janani I.; Tarasevich, Barbara J.; Grate, Jay W.; Bruckner-Lea, Cindy J.

2005-09-01T23:59:59.000Z

235

Energy Automation Systems Inc | Open Energy Information  

Open Energy Info (EERE)

Energy Automation Systems Inc Energy Automation Systems Inc Jump to: navigation, search Name Energy Automation Systems Inc. Place Hendersonville, Tennessee Zip 37075 Sector Buildings, Efficiency Product An energy efficiency consultancy firm focusing on analysis of energy consumption in buildings and providing improvments in the efficiency of the distribution system and equipment loads, similar to an ESCO. Coordinates 36.304861°, -86.620214° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":36.304861,"lon":-86.620214,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

236

Home Network Technologies and Automating Demand Response  

Science Conference Proceedings (OSTI)

Over the past several years, interest in large-scale control of peak energy demand and total consumption has increased. While motivated by a number of factors, this interest has primarily been spurred on the demand side by the increasing cost of energy and, on the supply side by the limited ability of utilities to build sufficient electricity generation capacity to meet unrestrained future demand. To address peak electricity use Demand Response (DR) systems are being proposed to motivate reductions in electricity use through the use of price incentives. DR systems are also be design to shift or curtail energy demand at critical times when the generation, transmission, and distribution systems (i.e. the 'grid') are threatened with instabilities. To be effectively deployed on a large-scale, these proposed DR systems need to be automated. Automation will require robust and efficient data communications infrastructures across geographically dispersed markets. The present availability of widespread Internet connectivity and inexpensive, reliable computing hardware combined with the growing confidence in the capabilities of distributed, application-level communications protocols suggests that now is the time for designing and deploying practical systems. Centralized computer systems that are capable of providing continuous signals to automate customers reduction of power demand, are known as Demand Response Automation Servers (DRAS). The deployment of prototype DRAS systems has already begun - with most initial deployments targeting large commercial and industrial (C & I) customers. An examination of the current overall energy consumption by economic sector shows that the C & I market is responsible for roughly half of all energy consumption in the US. On a per customer basis, large C & I customers clearly have the most to offer - and to gain - by participating in DR programs to reduce peak demand. And, by concentrating on a small number of relatively sophisticated energy consumers, it has been possible to improve the DR 'state of the art' with a manageable commitment of technical resources on both the utility and consumer side. Although numerous C & I DR applications of a DRAS infrastructure are still in either prototype or early production phases, these early attempts at automating DR have been notably successful for both utilities and C & I customers. Several factors have strongly contributed to this success and will be discussed below. These successes have motivated utilities and regulators to look closely at how DR programs can be expanded to encompass the remaining (roughly) half of the state's energy load - the light commercial and, in numerical terms, the more important residential customer market. This survey examines technical issues facing the implementation of automated DR in the residential environment. In particular, we will look at the potential role of home automation networks in implementing wide-scale DR systems that communicate directly to individual residences.

McParland, Charles

2009-12-01T23:59:59.000Z

237

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

238

V-132: IBM Tivoli System Automation Application Manager Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2: IBM Tivoli System Automation Application Manager Multiple 2: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities V-132: IBM Tivoli System Automation Application Manager Multiple Vulnerabilities April 12, 2013 - 6:00am Addthis PROBLEM: IBM has acknowledged multiple vulnerabilities in IBM Tivoli System Automation Application Manager PLATFORM: The vulnerabilities are reported in IBM Tivoli System Automation Application Manager versions 3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which may affect the product REFERENCE LINKS: Secunia Advisory: SA53006 IBM Security Bulletin 21633991 IBM Security Bulletin 21633992 CVE-2011-3563 CVE-2012-0497 CVE-2012-0498 CVE-2012-0499 CVE-2012-0501

239

Definition: Automated Islanding And Reconnection | Open Energy Information  

Open Energy Info (EERE)

Islanding And Reconnection Islanding And Reconnection Jump to: navigation, search Dictionary.png Automated Islanding And Reconnection Automated Islanding and Reconnection Automated islanding and reconnection is achieved by automated separation and subsequent reconnection (autonomous synchronization) of an independently operated portion of the T&D system (i.e., microgrid) from the interconnected electric grid. A microgrid is an integrated energy system consisting of interconnected loads and distributed energy resources which, as an integrated system, can operate in parallel with the grid or as an island.[1] View on Wikipedia Wikipedia Definition Islanding refers to the condition in which a distributed (DG) generator continues to power a location even though electrical grid power

240

EL Program: Next-Generation Robotics and Automation  

Science Conference Proceedings (OSTI)

... and automation technologies for smart manufacturing and cyber-physical systems ... robotics technology holds the potential to transform the future of ...

2013-01-02T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Results and commissioning issues from an automated demand response pilot  

E-Print Network (OSTI)

Conference on Building Commissioning. May 2002. Motegi,et al: Results and Commissioning Issues from an AutomatedConference on Building Commissioning: May 1e-20, 2004

Piette, Mary Ann; Watson, Dave; Sezgen, Osman; Motegi, Naoya

2004-01-01T23:59:59.000Z

242

Safety Aware Platooning of Automated Electric Transport Vehicles.  

E-Print Network (OSTI)

??Safety is a paramount concern when considering implementation of an automated highway where computers control the vehicles. Even with computer-fast reaction time there is inevitably (more)

Jackson, Spencer Scott

2013-01-01T23:59:59.000Z

243

Direct versus Facility Centric Load Control for Automated Demand Response  

E-Print Network (OSTI)

Interoperable Automated Demand Response Infrastructure.and Techniques for Demand Response. LBNL Report 59975. Mayand Communications for Demand Response and Energy Efficiency

Piette, Mary Ann

2010-01-01T23:59:59.000Z

244

Linking Continuous Energy Management and Open Automated Demand Response  

E-Print Network (OSTI)

A. Barat, D. Watson. Demand Response Spinning ReserveOpen Automated Demand Response Communication Standards:Dynamic Controls for Demand Response in a New Commercial

Piette, Mary Ann

2009-01-01T23:59:59.000Z

245

Northwest Open Automated Demand Response Technology Demonstration Project  

E-Print Network (OSTI)

reliability signals for demand response GTA HTTPS HVAC IT kWand Commissioning Automated Demand Response Systems. and Techniques for Demand Response. California Energy

Kiliccote, Sila

2010-01-01T23:59:59.000Z

246

Measurement and evaluation techniques for automated demand response demonstration  

E-Print Network (OSTI)

Development for Demand Response Calculation Findings andManagement and Demand Response in Commercial Buildings. of Fully Automated Demand Response in Large Facilities.

Motegi, Naoya; Piette, Mary Ann; Watson, David S.; Sezgen, Osman; ten Hope, Laurie

2004-01-01T23:59:59.000Z

247

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

the system at 14 General Mills facilities. Project Summary The project was to design an EMS for dramatically different AHUs. Rockwell Automation worked with General Mills...

248

Automated Diagnostics and Soft-Repair for Smart Homes  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated fault detection and diagnosis (AFDD) (<<1%) *&1; Around-the-clock protection and optimization *&1; Energy savings and longer equipment life *&1; Condition-based maintenance...

249

Automated Soil Gas Monitoring Chamber - Oak Ridge National ...  

Automated Soil Gas Monitoring Chamber ... A chamber for trapping soil gases as they evolve from the soil without disturbance to the soil and to the natural

250

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

assigned to their definition of a Smart Grid. So, what exactly does this Smart Grid distribution automation system look like? As always, interoperability is a factor. First, it's...

251

PUCK: an automated prompting system for smart environments: toward achieving automated prompting--challenges involved  

Science Conference Proceedings (OSTI)

The growth in popularity of smart environments has been quite steep in the last decade and so has the demand for smart health assistance systems. A smart home-based prompting system can enhance these technologies to deliver in-home interventions to users ... Keywords: Automated prompting, Imbalanced class distribution, Machine learning, Prompting systems, Smart environments

Barnan Das; Diane J. Cook; Maureen Schmitter-Edgecombe; Adriana M. Seelye

2012-10-01T23:59:59.000Z

252

AUTOMATED PROCESS MONITORING: APPLYING PROVEN AUTOMATION TECHNIQUES TO INTERNATIONAL SAFEGUARDS NEEDS  

SciTech Connect

Identification and quantification of specific alpha- and beta-emitting radionuclides in complex liquid matrices is highly challenging, and is typically accomplished through laborious wet chemical sample preparation and separations followed by analysis using a variety of detection methodologies (e.g., liquid scintillation, gas proportional counting, alpha energy analysis, mass spectrometry). Analytical results may take days or weeks to report. Chains of custody and sample security measures may also complicate or slow the analytical process. When an industrial process-scale plant requires the monitoring of specific radionuclides as an indication of the composition of its feed stream or of plant performance, radiochemical measurements must be fast, accurate, and reliable. Scientists at Pacific Northwest National Laboratory have assembled a fully automated prototype Process Monitor instrument capable of a variety of tasks: automated sampling directly from a feed stream, sample digestion / analyte redox adjustment, chemical separations, radiochemical detection and data analysis / reporting. The system is compact, its components are fluidically inter-linked, and analytical results could be immediately transmitted to on- or off-site locations. The development of a rapid radiochemical Process Monitor for 99Tc in Hanford tank waste processing streams, capable of performing several measurements per hour, will be discussed in detail. More recently, the automated platform was modified to perform measurements of 90Sr in Hanford tank waste stimulant. The system exemplifies how automation could be integrated into reprocessing facilities to support international nuclear safeguards needs.

O'Hara, Matthew J.; Durst, Philip C.; Grate, Jay W.; Devol, Timothy A.; Egorov, Oleg; Clements, John P.

2008-07-13T23:59:59.000Z

253

Automated Knowledge Annotation for Dynamic Collaborative Environments  

Science Conference Proceedings (OSTI)

This paper describes the Knowledge Encapsulation Framework (KEF), a suite of tools to enable automated knowledge annotation for modeling and simulation projects. This framework can be used to capture evidence (e.g., facts extracted from journal articles and government reports), discover new evidence (from similar peer-reviewed material as well as social media), enable discussions surrounding domain-specific topics and provide automatically generated semantic annotations for improved corpus investigation. The current KEF implementation is presented within a wiki environment, providing a simple but powerful collaborative space for team members to review, annotate, discuss and align evidence with their modeling frameworks.

Cowell, Andrew J.; Gregory, Michelle L.; Marshall, Eric J.; McGrath, Liam R.

2009-05-19T23:59:59.000Z

254

Honeywell Modular Automation System Computer Software Documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). This CSWD describes hardware and PFP developed software for control of stabilization furnaces. The Honeywell software can generate configuration reports for the developed control software. These reports are described in the following section and are attached as addendum's. This plan applies to PFP Engineering Manager, Thermal Stabilization Cognizant Engineers, and the Shift Technical Advisors responsible for the Honeywell MAS software/hardware and administration of the Honeywell System.

STUBBS, A.M.

2000-12-04T23:59:59.000Z

255

Automated flow-temperature-humidity control system  

SciTech Connect

An automated system that controls air flow, temperature, and humidity was developed from a commercially available temperature-humidity indicator and a specially built flow-temperature-humidity control module. Parameters are set using direct-reading dials on the control module. The air flow is maintained using a mass-flow controller while process controllers connected to the indicator regulate humidity and temperature. The system will run indefinitely without need for operator intervention. If the module and indicator are calibrated properly, accurate air flows (+-2% of full scale), temperatures (+-0.3/sup 0/C), and humidities (+-2% RH) can be achieved.

Nelson, G.O.; Taylor, R.D.

1980-10-01T23:59:59.000Z

256

Evaluatoni of Automated Utility Bill Calibration Methods  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. Evaluation of Automated Utility Bill Calibration Methods BA Technical Update Meeting Ben Polly, Joe Robertson 04/30/13 Utility Bill Calibration * "Calibrate" or "true-up" building energy models to utility bill data to increase the accuracy of retrofit savings predictions * Calibration methods typically involve adjusting input parameters * Predict retrofit savings using the adjusted (calibrated) model 2 Background: BESTEST-EX * BESTEST-EX is a suite for testing calibration methods and retrofit savings predictions associated with audit software * Field trials showed that:

257

Siemens SOFC Test Article and Module Design  

SciTech Connect

Preliminary design studies of the 95 kWe-class SOFC test article continue resulting in a stack architecture of that is 1/3 of 250 kWe-class SOFC advanced module. The 95 kWeclass test article is envisioned to house 20 bundles (eight cells per bundle) of Delta8 cells with an active length of 100 cm. Significant progress was made in the conceptual design of the internal recirculation loop. Flow analyses were initiated in order to optimize the bundle row length for the 250 kWeclass advanced module. A preferred stack configuration based on acceptable flow and thermal distributions was identified. Potential module design and analysis issues associated with pressurized operation were identified.

None

2011-03-31T23:59:59.000Z

258

Formal Verification of Safety Automation Logic Designs  

E-Print Network (OSTI)

In safety critical processes, especially in nuclear power plants, the new digitalized automation (I&C) systems have brought out new needs for safety evaluation. The programmable digital logic controllers can perform complicated control tasks and, thus, their comprehensive verification against safety requirements is a difficult task. Model checking is a promising approach that enables complete verification of a logic design when a finite state machine model of the control logic is available. The paper describes the use of model checking for the verification of an arc protection system and summarizes experiences of utilizing model checking in automation design and verification. For the verification of the arc protection system, it was necessary to model the overall design of the system and its operation environment. The environment model could be kept relatively simple while covering the essential behaviour of the environment. The results show that it is possible to reliably verify the presence of a desired or the absence of an undesired behaviour of the system. The possibility of complete verification makes model checking different from simulation based testing where only selected schemes can be simulated and one can never be sure that all the possible sequences are examined.

Janne Valkonen; Matti Koskimies; Kim Bjrkman; Keijo Heljanko; Ilkka Niemel; Jari J. Hmlinen

2009-01-01T23:59:59.000Z

259

Automation of the LANL ARIES lathe glovebox  

SciTech Connect

This paper presents the design of an automation system required for material handling within a glovebox. The Advanced Recovery and Integration Extraction System (ARIES) located at the Los Alamos National Laboratory (LANL) enables workers to dismantle nuclear weapons, separating the plutonium from other weapon components. The ARIES line consists of several gloveboxes that allow the 'pit' or trigger of a nuclear weapon to be dismantled and the plutonium stored in a safe form. The Lathe glovebox is the first step in the ARIES line and is used to cut the pit open to be dismantled. There are several methods for doing this, however there are advantages to using the lathe over other methods for this process. In general, this system will give the ARIES line the capability to handle a wider range of pit types. The system consists of a lathe, a 4 Degree of Freedom (DOF) robot, a glovebox that houses them, and a universal controller that resides outside the glovebox and controls all equipment. This paper will present the design and possible implementation of this lathe automation system. It will cover the system requirements, the mechanical hardware used within the glovebox, the control system and software, and operation procedures for various tasks.

Pittman, P. C. (Pete C.); Staab, T. A. (Torsten); Nelson, D. C. (David C.); Santistevan, W. W. (William W.); Brown, W. G. (Wendel G.)

2001-01-01T23:59:59.000Z

260

UV LED lighting for automated crystal centring  

E-Print Network (OSTI)

A direct outcome of the exponential growth of macromolecular crystallography is the continuously increasing demand for synchrotron beam time, both from academic and industrial users. As more and more projects entail screening a profusion of sample crystals, fully automated procedures at every level of the experiments are being implemented at all synchrotron facilities. One of the major obstacles to achieving such automation lies in the sample recognition and centring in the X-ray beam. The capacity of UV light to specifically react with aromatic residues present in proteins or with DNA base pairs is at the basis of UV-assisted crystal centring. Although very efficient, a well known side effect of illuminating biological samples with strong UV sources is the damage induced on the irradiated samples. In the present study the effectiveness of a softer UV light for crystal centring by taking advantage of low-power light-emitting diode (LED) sources has been investigated. The use of UV LEDs represents a lowcost solution for crystal centring with high specificity.

Leonard M. G. Chavas; Yusuke Yamada; Masahiko Hiraki; Noriyuki Igarashi; Naohiro Matsugaki; Soichi Wakatsuki

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Application Guide for the Automation of Distribution Feeder Capacitors  

Science Conference Proceedings (OSTI)

This fourth and final report in EPRI's capacitor reliability study deals with automating distribution capacitors. Prior reports dealt with nuisance fuse operations, operating and construction practices, and lighting protection and grounding of capacitor controllers. This guide is concerned with applying automated switched capacitors to distribution systems. Consideration is given to applications involving locally controlled capacitor banks and to systems utilizing centrally controlled, switched capacitor...

2005-12-13T23:59:59.000Z

262

Automated Phase Design and Timing Adjustment for Signal Phase Design  

Science Conference Proceedings (OSTI)

In this paper we describe the design processes of human traffic engineers and the development of an automated system that solves the problem of timing adjustment in signal phase sequence design. i>Signal phase sequencing refers to the sequence of ... Keywords: automated design, case-based reasoning, signal phase design, traffic management

L. Wang; C. C. Hayes; R. R. Penner

2001-06-01T23:59:59.000Z

263

Weight control in an automated design environment. [Of aircraft  

SciTech Connect

Results of a program to study weight control in an automated design environment are presented. Automation, computer applications, design coverage and special communication problems are discussed. Results of a tube weight analysis routine, a program of weight control incentives, and results of a special weight reduction program are given.

Staton, R.N.

1987-01-01T23:59:59.000Z

264

Exploring user's perception toward automated checkout trolley in developing countries  

Science Conference Proceedings (OSTI)

Retailers nowadays have relied on technology-based self-service options such as the self-checkout system to provide better customer value through pleasant shopping experience. Recently, automated checkout shopping trolley technologies have taken a further ... Keywords: automated checkout, technology management, technology-based self-service (TBSS)

Koh Peik See; Tan Shiang-Yen; Nasuha Lee Abdullah; Rosnah Idrus

2011-04-01T23:59:59.000Z

265

An automated translator for model checking time constrained workflow systems  

Science Conference Proceedings (OSTI)

Workflows have proven to be a useful conceptualization for the automation of business processes. While formal verification methods (e.g., model checking) can help ensure the reliability of workflow systems, the industrial uptake of such methods has been ... Keywords: automated translation, distributed model checking, modeling, time, workflow systems

Ahmed Shah Mashiyat; Fazle Rabbi; Hao Wang; Wendy MacCaull

2010-09-01T23:59:59.000Z

266

Automated gas transfer systems for low pressure operations  

Science Conference Proceedings (OSTI)

The introduction of new components and the modification of commercially available hardware have been instrumental in the automation of low pressure gas transfer systems. The benefits from the automation have been faster sample operation, increased precision and a safer environment for the operator.

Baker, R.W.; Hoseus, N.L.

1988-01-22T23:59:59.000Z

267

Prototypes for automated architectural 3D-layout  

Science Conference Proceedings (OSTI)

Prototypes for automated spatial layout in architecture focus on approaches, which define occupiable space as an orthogonal 2D-grid and use algorithms to allocate each rectangle of the grid to a particular function. However, these approaches are limiting ... Keywords: 3D-modeling and automated spatial layout, euclidean and non-euclidean geometries, satisfiability

Henriette Bier; Adriaan De Jong; Niels Brouwers; Marijn Heule; Hans Van Maaren / Gijs Van Der Hoorn

2007-09-01T23:59:59.000Z

268

Automated economic data processing in the changing business world  

Science Conference Proceedings (OSTI)

An attempt is made for exploring some strands of the automated economic data processing in the changing business world. The new realities in business management and automated economic data processing are outlined. Some strands for intellectual support ... Keywords: E-business, M-business, business intelligence, data processing, information technology, knowledge management

Ljuben Kraev

2003-06-01T23:59:59.000Z

269

Efficient and effective automated surveillance agents using kernel tricks  

Science Conference Proceedings (OSTI)

Many schemes have been presented over the years to develop automated visual surveillance systems. However, these schemes typically need custom equipment, or involve significant complexity and storage requirements. In this paper we present three software-based ... Keywords: agent, automated, camera, intrusion, kernel, surveillance

Tarem Ahmed, Xianglin Wei, Supriyo Ahmed, Al-Sakib Khan Pathan

2013-05-01T23:59:59.000Z

270

Traffic measurement and analysis of building automation and control networks  

Science Conference Proceedings (OSTI)

This paper proposes a framework for a flow-based network traffic monitoring of building automation and control networks. Current approaches to monitor special environment networks are limited to checking accessibility and a state of monitored devices. ... Keywords: BACnet, BACnetflow, analysis, automation, building, control, measurement, network

Radek Krej?; Pavel ?eleda; Jakub Dobrovoln

2012-06-01T23:59:59.000Z

271

Towards automated design of MAC protocols for underwater wireless networks  

Science Conference Proceedings (OSTI)

We present a framework for the automated design of MAC protocols for underwater acoustic wireless networks. We formulate a protocol optimization problem in which the exchange of control packets is explicitly modeled. A protocol optimization program generates ... Keywords: automation, mac, network, wireless underwater protocol

Volkan Rodoplu; Amir Aminzadeh Gohari; Wei Tang

2008-09-01T23:59:59.000Z

272

The CADE-23 Automated Theorem Proving System Competition - CASC-23  

Science Conference Proceedings (OSTI)

The CADE ATP System Competition (CASC) is an annual evaluation of fully automatic, classical logic Automated Theorem Proving (ATP) systems. CASC-23 was the sixteenth competition in the CASC series. Thirty-six ATP systems and system variants competed ... Keywords: Automated theorem proving, competition

Geoff Sutcliffe

2012-01-01T23:59:59.000Z

273

An application of automated reasoning in natural language question answering  

Science Conference Proceedings (OSTI)

The LogAnswer system is an application of automated reasoning to the field of open domain question answering. In order to find answers to natural language questions regarding arbitrary topics, the system integrates an automated theorem prover in a framework ... Keywords: Question answering, theorem prover

Ulrich Furbach; Ingo Glckner; Bjrn Pelzer

2010-04-01T23:59:59.000Z

274

The CADE-21 automated theorem proving system competition  

Science Conference Proceedings (OSTI)

The CADE ATP system competition (CASC) is an annual evaluation of fully automatic, first order Automated Theorem Proving (ATP) systems. CASC-21 was the twelfth competition in the CASC series. Twenty ATP systems and system variants competed in the various ... Keywords: Competition, automated theorem proving

Geoff Sutcliffe

2008-01-01T23:59:59.000Z

275

Design automation of cellular neural networks for data fusion applications  

Science Conference Proceedings (OSTI)

In this study, a novel methodology for the design automation of cellular neural networks (CNNs) for different applications is proposed. In particular, an evolvable algorithm has been developed providing the ability to generate the netlist of the requested ... Keywords: Cellular neural networks, Data fusion, Design automation, Sensor network

Prodromos Chatziagorakis; Georgios Ch. Sirakoulis; John N. Lygouras

2012-02-01T23:59:59.000Z

276

Automated Configuration of Algorithms for Solving Hard Computational Problems  

E-Print Network (OSTI)

Automated Configuration of Algorithms for Solving Hard Computational Problems by Frank Hutter Dipl-performing algorithms for many hard problems are highly parameterized. Selecting the best heuristics and tuning studies the automation of this important part of algorithm design: the configuration of discrete algorithm

Hutter, Frank

277

Opportunities for Energy Efficiency and Automated Demand Response in Industrial Refrigerated Warehouses in California  

E-Print Network (OSTI)

your Power. (2008). "Demand Response Programs." RetrievedS. (2008). Automated Demand Response Results from Multi-Yearusing Open Automated Demand Response, California Energy

Lekov, Alex

2009-01-01T23:59:59.000Z

278

Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings  

E-Print Network (OSTI)

below. Fig. 4 Automated demand response general features Thearchitecture Automated Demand Response System ArchitectureCould Bene?t for Demand Response Programs, But Challenges

Piette, Mary Ann

2010-01-01T23:59:59.000Z

279

Demand Response and Open Automated Demand Response Opportunities for Data Centers  

E-Print Network (OSTI)

Standardized Automated Demand Response Signals. Presented atand Automated Demand Response in Industrial RefrigeratedActions for Industrial Demand Response in California. LBNL-

Mares, K.C.

2010-01-01T23:59:59.000Z

280

Findings from Seven Years of Field Performance Data for Automated Demand Response in Commercial Buildings  

E-Print Network (OSTI)

Open Automated Demand Response Demonstration Project LBNL-2009a). Open Automated Demand Response Communications inand Actions for Industrial Demand Response in California.

Kiliccote, Sila

2010-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Design and Implementation of an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large Facilities. CEC-Fully Automated Demand Response Tests in Large Facilities.Management and Demand Response in Commercial Building. ,

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-01-01T23:59:59.000Z

282

ISA Approves Standard for Wireless Automation in Process Control  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 - 1:28pm Addthis September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial

283

Reference Model for Control and Automation Systems in Electrical Power |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Model for Control and Automation Systems in Electrical Model for Control and Automation Systems in Electrical Power Reference Model for Control and Automation Systems in Electrical Power Modern infrastructure automation systems are threatened by cyber attack. Their higher visibility in recent years and the increasing use of modern information technology (IT) components contribute to increased security risk. A means of analyzing these infrastructure automation systems is needed to help understand and study the many system relationships that affect the overall security of the system. Modeling these systems is a very cost effective means of addressing the problem of security from an overall system view. The model presented in the document below provides a structured, cost effective approach to address technical security in process control systems

284

Building Technologies Office: Small- and Medium-Sized Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Small- and Medium-Sized Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project to someone by E-mail Share Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Facebook Tweet about Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Twitter Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Google Bookmark Building Technologies Office: Small- and Medium-Sized Building Automation and Control System Needs: Scoping Study Research Project on Delicious Rank Building Technologies Office: Small- and Medium-Sized Building

285

A sensor-based automation system for handling nuclear materials  

Science Conference Proceedings (OSTI)

An automated system is being developed for handling large payloads of radioactive nuclear materials in an analytical laboratory. The automation system performs unpacking and repacking of payloads from shipping and storage containers, and delivery of the payloads to the stations in the laboratory. The system uses machine vision and force/torque sensing to provide sensor-based control of the automation system in order to enhance system safety, flexibility, and robustness, and achieve easy remote operation. The automation system also controls the operation of the laboratory measurement systems and the coordination of them with the robotic system. Particular attention has been given to system design features and analytical methods that provide an enhanced level of operational safety. Independent mechanical gripper interlock and tool release mechanisms were designed to prevent payload mishandling. An extensive Failure Modes and Effects Analysis of the automation system was developed as a safety design analysis tool.

Drotning, W.; Kimberly, H.; Wapman, W.; Darras, D. [and others

1997-03-01T23:59:59.000Z

286

Manz Automation AG | Open Energy Information  

Open Energy Info (EERE)

AG AG Jump to: navigation, search Name Manz Automation AG Place Reutlingen, Baden-Württemberg, Germany Zip D-72768 Sector Solar Product German manufacturer of solar and LCD capital equipment. Coordinates 48.49159°, 9.21487° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.49159,"lon":9.21487,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

287

An automated neutron monitor maintenance system  

Science Conference Proceedings (OSTI)

Neutron detectors are commonly used by the nuclear materials processing industry to monitor fissile materials in process vessels and tanks. The proper functioning of these neutron monitors must be periodically evaluated. We have developed and placed in routine use a PC-based multichannel analyzer (MCA) system for on-line BF3 and He-3 gas-filled detector function testing. The automated system: 1) acquires spectral data from the monitor system, 2) analyzes the spectrum to determine the detector`s functionality, 3) makes suggestions for maintenance or repair, as required, and 4) saves the spectrum and results to disk for review. The operator interface has been designed to be user-friendly and to minimize the training requirements of the user. The system may also be easily customized for various applications

Moore, F.S.; Griffin, J.C.; Odell, D.M.C.

1996-09-01T23:59:59.000Z

288

Automated startup of the MIT research reactor  

SciTech Connect

This summary describes the development, implementation, and testing of a generic method for performing automated startups of nuclear reactors described by space-independent kinetics under conditions of closed-loop digital control. The technique entails first obtaining a reliable estimate of the reactor's initial degree of subcriticality and then substituting that estimate into a model-based control law so as to permit a power increase from subcritical on a demanded trajectory. The estimation of subcriticality is accomplished by application of the perturbed reactivity method. The shutdown reactor is perturbed by the insertion of reactivity at a known rate. Observation of the resulting period permits determination of the initial degree of subcriticality. A major advantage to this method is that repeated estimates are obtained of the same quantity. Hence, statistical methods can be applied to improve the quality of the calculation.

Kwok, K.S. (Massachusetts Inst. of Tech., Cambridge (United States))

1992-01-01T23:59:59.000Z

289

Automated Spot Weld Inspection using Infrared Thermography  

Science Conference Proceedings (OSTI)

An automated non-contact and non-destructive resistance spot weld inspection system based on infrared (IR) thermography was developed for post-weld applications. During inspection, a weld coupon was heated up by an auxiliary induction heating device from one side of the weld, while the resulting thermal waves on the other side were observed by an IR camera. The IR images were analyzed to extract a thermal signature based on normalized heating time, which was then quantitatively correlated to the spot weld nugget size. The use of normalized instead of absolute IR intensity was found to be useful in minimizing the sensitivity to the unknown surface conditions and environment interference. Application of the IR-based inspection system to different advanced high strength steels, thickness gauges and coatings were discussed.

Chen, Jian [ORNL; Zhang, Wei [ORNL; Yu, Zhenzhen [ORNL; Feng, Zhili [ORNL

2012-01-01T23:59:59.000Z

290

Automated User Modeling for Personalized Digital Libraries  

E-Print Network (OSTI)

Digital libraries (DL) have become one of the most typical ways of accessing any kind of digitalized information. Due to this key role, users welcome any improvements on the services they receive from digital libraries. One trend used to improve digital services is through personalization. Up to now, the most common approach for personalization in digital libraries has been user-driven. Nevertheless, the design of efficient personalized services has to be done, at least in part, in an automatic way. In this context, machine learning techniques automate the process of constructing user models. This paper proposes a new approach to construct digital libraries that satisfy users necessity for information: Adaptive Digital Libraries, libraries that automatically learn user preferences and goals and personalize their interaction using this information.

E. Frias-martinez; G. Magoulas; S. Chen; R. Macredie

2006-01-01T23:59:59.000Z

291

Honeywell modular automation system computer software documentation  

SciTech Connect

The purpose of this Computer Software Document (CSWD) is to provide configuration control of the Honeywell Modular Automation System (MAS) in use at the Plutonium Finishing Plant (PFP). The Honeywell MAS is used to control the thermal stabilization furnaces in glovebox HA-211. The PFP developed software is being updated to reflect the Polycube Processing and Unwashed Salt Thermal Stabilization program addition. The polycube processing program was installed per HNF-FMP-02-11162-R2. The functional test of the program was performed in JCS work package 22-02-1031, The unwashed salt item program was installed per HNF-FMP-03-16577-RO. The functional test of the program completed in JCS work package 22-03-00654.

STUBBS, A.M.

2003-07-02T23:59:59.000Z

292

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-01-01T23:59:59.000Z

293

Automated Fuel Element Closure Welding System  

SciTech Connect

The Automated Fuel Element Closure Welding System is a robotic device that will load and weld top end plugs onto nuclear fuel elements in a highly radioactive and inert gas environment. The system was developed at Argonne National Laboratory-West as part of the Fuel Cycle Demonstration. The welding system performs four main functions, it (1) injects a small amount of a xenon/krypton gas mixture into specific fuel elements, and (2) loads tiny end plugs into the tops of fuel element jackets, and (3) welds the end plugs to the element jackets, and (4) performs a dimensional inspection of the pre- and post-welded fuel elements. The system components are modular to facilitate remote replacement of failed parts. The entire system can be operated remotely in manual, semi-automatic, or fully automatic modes using a computer control system. The welding system is currently undergoing software testing and functional checkout.

Wahlquist, D.R.

1993-03-01T23:59:59.000Z

294

Design and Operation of an Open, Interoperable Automated Demand Response  

NLE Websites -- All DOE Office Websites (Extended Search)

Design and Operation of an Open, Interoperable Automated Demand Response Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Title Design and Operation of an Open, Interoperable Automated Demand Response Infrastructure for Commercial Buildings Publication Type Journal Article LBNL Report Number LBNL-2340e Year of Publication 2009 Authors Piette, Mary Ann, Girish Ghatikar, Sila Kiliccote, David S. Watson, Edward Koch, and Dan Hennage Journal Journal of Computing Science and Information Engineering Volume 9 Issue 2 Keywords communication and standards, market sectors, openadr Abstract This paper describes the concept for and lessons from the development and field-testing of an open, interoperable communications infrastructure to support automated demand response (auto-DR). Automating DR allows greater levels of participation, improved reliability, and repeatability of the DR in participating facilities. This paper also presents the technical and architectural issues associated with auto-DR and description of the demand response automation server (DRAS), the client/server architecture-based middle-ware used to automate the interactions between the utilities or any DR serving entity and their customers for DR programs. Use case diagrams are presented to show the role of the DRAS between utility/ISO and the clients at the facilities.

295

Microsoft Word - Wireless Automation World for OE FINAL.doc  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Automation World Features New White Paper on Wireless Security, Interviews Authors Automation World Features New White Paper on Wireless Security, Interviews Authors April 16, 2009 The April 2009 issue of Automation World magazine features the white paper Wireless Systems Considerations When Implementing NERC Critical Infrastructure Protection Standards. The paper addresses wireless protection issues arising from requirements of the Critical Infrastructure Protection (CIP) Standards for the electricity sector, developed by the North American Electric Reliability Corporation (NERC). The CIP standards require entities to monitor and control all electronic access to a company's electronic security perimeter, but this requirement becomes difficult to implement when it

296

Distribution automation. (Latest citations from the INSPEC database). Published Search  

SciTech Connect

The bibliography contains citations concerning distribution automation for the electric power utility industry. Distribution automation comprises a combination of real-time load monitoring; detailed modeling of the distribution, generation, transmission, and customer systems; and remote control of devices. Distribution automation achieves energy conservation by reduction of consumption, lower losses in distribution and transmission mission circuits, and reduction of peak load. Topics covered include demand-side management, telecontrol, distribution networks, communications software, and cost-benefit analyses. (Contains a minimum of 93 citations and includes a subject term index and title list.)

Not Available

1994-12-01T23:59:59.000Z

297

To Wave Or Not To Wave? Order Release Policies for Warehouses with an Automated Sorter  

E-Print Network (OSTI)

Wave-based release policies are prevalent in warehouses with an automated sorter, and take different

Gallien, Jrmie

2008-09-08T23:59:59.000Z

298

Industrial SPP/Partner Teaming Profile - Rockwell Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation Rockwell Automation 6400 West Enterprise Drive Mequon, WI 53092 Business: Control Products & Solutions Joshua J. Olive Sr. Product Specialist Phone: 262-512-2095 Email: jjolive@ra.rockwell.com Industrial Partner General Mills 9000 Plymouth Ave. North Minneapolis, MN 55427 Business: Food Processing David Spryshak Facilities, Control, & IS Engineer Phone: 763-764-7091 Email: Dave.spryshak@genmills.com Rockwell Automation helps General Mills save $2.6 million annually through a standardized energy management system for air handling units Project Scope Rockwell Automation partnered with General Mills to develop a standardized energy management system (EMS) for controlling air handling units (AHU) and has installed the system at 14 General Mills

299

Definition: Automated Feeder And Line Switching | Open Energy Information  

Open Energy Info (EERE)

Definition Definition Edit with form History Facebook icon Twitter icon » Definition: Automated Feeder And Line Switching Jump to: navigation, search Dictionary.png Automated Feeder And Line Switching Automated feeder and line switching is realized through automatic isolation and reconfiguration of faulted segments of distribution feeders or transmission lines via sensors, controls, switches, and communications systems. These devices can operate autonomously in response to local events or in response to signals from a central control system.[1] Related Terms transmission lines, transmission line References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from "http://en.openei.org/w/index.php?title=Definition:Automated_Feeder_And_Line_Switching&oldid=480562"

300

Price Server System for Automated Critical Peak Pricing  

NLE Websites -- All DOE Office Websites (Extended Search)

Price Server System for Automated Critical Peak Pricing Price Server System for Automated Critical Peak Pricing Speaker(s): David S. Watson Date: June 3, 2005 - 12:00pm Location: 90-3148 Overview of current California Energy Commission (CEC)/Demand Response Research Center (DRRC) Auto-CPP project: This summer, some select commercial CPP customers of PG&E will have the option of joining the Automated Critical Peak Pricing pilot. The pilot will have the same tariffs as standard CPP programs, but will include an added feature: automated shedding of electric loads. Through use of the Price Server System, day-ahead CPP event signals initiated by PG&E will ultimately cause electric loads to be automatically curtailed on commercial customer sites. These optional predetermined shed strategies will occur without

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

V-205: IBM Tivoli System Automation for Multiplatforms Java V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities V-205: IBM Tivoli System Automation for Multiplatforms Java Multiple Vulnerabilities July 29, 2013 - 4:20am Addthis PROBLEM: IBM has acknowledged a weakness and multiple vulnerabilities in IBM Tivoli System Automation for Multiplatforms, which can be exploited by malicious, local users to disclose certain sensitive information and gain escalated privileges and by malicious people to disclose certain sensitive information, manipulate certain data, bypass certain security restrictions, cause a DoS (Denial of Service), and compromise a vulnerable system. PLATFORM: The weakness and the vulnerabilities are reported in versions 3.1 through 3.2.2 running on AIX, Linux, Solaris, and Windows.

302

ISA Approves Standard for Wireless Automation in Process Control Applications  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

ISA Approves Standard for Wireless Automation in Process Control Applications ISA Approves Standard for Wireless Automation in Process Control Applications September 22, 2009 On September 9, the Standards and Practices Board of the International Society for Automation (ISA) approved the ISA-100.11a wireless standard, "Wireless Systems for Industrial Automation: Process Control and Related Applications," making it an official ISA standard. The standard is intended to provide secure, reliable wireless operation for monitoring, alerting, and control applications. It enables robustness with non-ISA-compliant legacy wireless systems, coexistence and interoperability with other wireless devices, and robustness in harsh industrial environments. To meet the needs of industrial wireless users and operators of low-energy fixed, portable, and moving

303

Java Automation Controller and Real-Time Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Java Automation Controller and Real-Time Systems Java Automation Controller and Real-Time Systems Speaker(s): Greg Bollella Date: June 29, 2009 - 12:00pm Location: 90-3122 Java has always been a disruptive technology and now it is breaking the mold in industrial, process, building, and transportation automation systems. For many years, programmable logic controllers (PLCs), the digital versions of old relay-based control systems (such as that used in the NYC Subway system in the late 1800s) have primarily controlled these systems. PLCs are the workhorses of the controls industry but the market is characterized by proprietary, closed, expensive, special-purpose solutions. A Java-based automation controller breaks the mold by allowing control algorithms, which require strict real-time capabilities, to run on

304

Radioanalytical Chemistry for Automated Nuclear Waste Process Monitoring  

Science Conference Proceedings (OSTI)

The objectives of our research were to develop the first automated radiochemical process analyzer including sample pretreatment methodoology, and to initiate work on new detection approaches, especially using modified diode detectors.

Jay W. Grate; Timothy A. DeVol

2006-07-20T23:59:59.000Z

305

Development of an Automated Classification Procedure for Rainfall Systems  

Science Conference Proceedings (OSTI)

An automated procedure for classifying rainfall systems (meso-? scale and larger) was developed using an operational analysis of hourly precipitation estimates from radar and rain gauge data. The development process followed two main phases: a ...

Michael E. Baldwin; John S. Kain; S. Lakshmivarahan

2005-04-01T23:59:59.000Z

306

Decisions in the perspective automated artillery fire support  

Science Conference Proceedings (OSTI)

This paper is focused on decisions in the future Automated Artillery Fire Support Control System. Artillery units of the Army of the Czech Republic, reflecting current global security neighborhood, can be used outside the Czech Republic. The paper presents ...

M. Blaha; L. Potuk

2011-10-01T23:59:59.000Z

307

Operational Automated Graphics at the National Climatic Data Center  

Science Conference Proceedings (OSTI)

In January 1987 the National Climatic Data Center introduced automated graphics into its Climatological Data publications. The publications, which are produced for each state and distributed to thousands of subscribers monthly, have, in the past, ...

Michael Crowe; Thomas Reek; Robert Mattingly

1988-01-01T23:59:59.000Z

308

Summary of the 2006 Automated Demand Response Pilot  

E-Print Network (OSTI)

This paper discusses the specific concept for, design of, and results from a pilot program to automate demand response with critical peak pricing. California utilities have been exploring the use of critical peak pricing (CPP) to help reduce peak day summer time electric loads. CPP is a form of price-responsive demand response. This Automated Critical Peak Pricing (Auto-CPP) project from 2006 draws upon three years of previous research and demonstrations from the years of 2003, 2004, and 2005. The purpose of automated demand response (DR) is to improve the responsiveness and participation of electricity customers in DR programs and lower overall costs to achieve DR. Auto-CPP is a form of automated demand response (Auto-DR).

Piette, M.; Kiliccote, S.

2007-01-01T23:59:59.000Z

309

Automated electricity demand response - Tech Close-Up  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated electricity demand response - Tech Close-Up Click here to view this video Date: August 27, 2013 Presenter(s): Many, including EETD's Mary Ann Piette. A Tech Close-Up news...

310

Automated Video Analysis of Animal Movements Using Gabor Orientation Filters  

E-Print Network (OSTI)

a Single frame from a video clip, after de-interlacing.median of all frames in the video sequence. c The output of010-9062-1 Automated Video Analysis of Animal Movements

Wagenaar, Daniel A.; Kristan, Wiliam B.

2010-01-01T23:59:59.000Z

311

Human-automation collaborative RRT for UAV mission path planning  

E-Print Network (OSTI)

Future envisioned Unmanned Aerial Vehicle (UAV) missions will be carried out in dynamic and complex environments. Human-automation collaboration will be required in order to distribute the increased mission workload that ...

Caves, Amrico De Jess (Caves Corral)

2010-01-01T23:59:59.000Z

312

Wireless home automation networks: a survey of architectures and technologies  

Science Conference Proceedings (OSTI)

Wireless home automation networks comprise wireless embedded sensors and actuators that enable monitoring and control applications for home user comfort and efficient home management. This article surveys the main current and emerging solutions that ...

Carles Gomez; Josep Paradells

2010-06-01T23:59:59.000Z

313

Monitoring Free-Water Evaporation at Automated Weather Stations  

Science Conference Proceedings (OSTI)

The automation of weather stations necessitates an alternative approach to the traditional manual measure of free-water evaporation made using a class A pan. This study compared commercially available water-level sensing transducers mounted on ...

S. M. McGinn; H. D. J. McLean

1995-12-01T23:59:59.000Z

314

Comprehensive Automated Quality Assurance of Daily Surface Observations  

Science Conference Proceedings (OSTI)

This paper describes a comprehensive set of fully automated quality assurance (QA) procedures for observations of daily surface temperature, precipitation, snowfall, and snow depth. The QA procedures are being applied operationally to the Global ...

Imke Durre; Matthew J. Menne; Byron E. Gleason; Tamara G. Houston; Russell S. Vose

2010-08-01T23:59:59.000Z

315

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of Intelligent Transportation Systems (ITS). Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, ...

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2013-02-01T23:59:59.000Z

316

An Automated Radar Technique for the Identification of Tropical Precipitation  

Science Conference Proceedings (OSTI)

A radar-based automated technique for the identification of tropical precipitation was developed to improve quantitative precipitation estimation during extreme rainfall events. The technique uses vertical profiles of reflectivity to identify the ...

Xiaoyong Xu; Kenneth Howard; Jian Zhang

2008-10-01T23:59:59.000Z

317

Exploiting home automation protocols for load monitoring in smart buildings  

Science Conference Proceedings (OSTI)

Monitoring and controlling electrical loads is crucial for demand-side energy management in smart grids. Home automation (HA) protocols, such as X10 and Insteon, have provided programmatic load control for many years, and are being widely deployed in ...

David Irwin; Sean Barker; Aditya Mishra; Prashant Shenoy; Anthony Wu; Jeannie Albrecht

2011-11-01T23:59:59.000Z

318

V-132: IBM Tivoli System Automation Application Manager Multiple...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3.1, 3.2, 3.2.1, and 3.2.2 ABSTRACT: Multiple security vulnerabilities exist in the IBM Java Runtime Environment component of IBM Tivoli System Automation Application Manager which...

319

Automated generation of kinetic chemical mechanisms using rewriting  

Science Conference Proceedings (OSTI)

Several software systems have been developed recently for the automated generation of combustion reactions kinetic mechanisms using different representations of species and reactions and different generation algorithms. In parallel, several software ...

Olivier Bournez; Guy-Marie Cme; Valrie Conraud; Hlne Kirchner; Liliana Ib?nescu

2003-06-01T23:59:59.000Z

320

Automated reaction mechanism generation : improving accuracy and broadening scope  

E-Print Network (OSTI)

Chemical kinetic modeling plays an important role in the study of reactive chemical systems. Thus, an automated means of constructing chemical kinetic models forms a useful tool in the engineering and science surrounding ...

Magoon, Gregory Russell

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

State-of-the-art automated process simulation systems  

Science Conference Proceedings (OSTI)

The control and engineering tasks accomplished with the help of automated process simulation systems are described. The practical solution examples are cited. The UniSim Design system, providing modeling of all stages of production cycle, is described.

V. M. Dozortsev; E. Yu. Kreidlin

2010-09-01T23:59:59.000Z

322

Proceedings of the 45th annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 45th Design Automation Conference and the City of Anaheim! DAC is the premier event for the electronic design community. It offers the industry's most prestigious technical conference in combination with the biggest exhibition. DAC is ...

Limor Fix

2008-06-01T23:59:59.000Z

323

Modelling and automated composition of user-centric services  

Science Conference Proceedings (OSTI)

User-centric services bring additional constraints to the problem of automated service composition. While in business-centric settings the services are orchestrated in order to accomplish a specific business task, user-centric service composition should ...

Raman Kazhamiakin; Massimo Paolucci; Marco Pistore; Heorhi Raik

2010-10-01T23:59:59.000Z

324

Toward Automated Interpretation of Satellite Imagery for Navy Shipboard Applications  

Science Conference Proceedings (OSTI)

The U.S. Navy has plans to develop an automated system to analyze satellite imagery aboard its ships at sea. Lack of time for training, in combination with frequent personnel rotations, precludes the building of extensive imagery interpretation ...

James E. Peak; Paul M. Tag

1992-07-01T23:59:59.000Z

325

Intelligent and collaborative embedded computing in automation engineering  

Science Conference Proceedings (OSTI)

This paper presents an overview of the the novel technologies that we are experiencing today in the automation industries. We present the opportunities and challenges of having tightly coupled collaborative networks of embedded systems for controlling ...

Mohammad Abdullah Al Faruque; Arquimedes Canedo

2012-03-01T23:59:59.000Z

326

Assessing the performance of human-automation collaborative planning systems  

E-Print Network (OSTI)

Planning and Resource Allocation (P/RA) Human Supervisory Control (HSC) systems utilize the capabilities of both human operators and automated planning algorithms to schedule tasks for complex systems. In these systems, ...

Ryan, Jason C. (Jason Christopher)

2011-01-01T23:59:59.000Z

327

Face occlusion detection for automated teller machine surveillance  

Science Conference Proceedings (OSTI)

Real time automatic alarm systems play an essential role in security management, as evidenced by the surveillance cameras installed in nearly all automated teller machines (ATMs). Whereas manual video surveillance requires constant staff monitoring, ...

Daw-Tung Lin; Ming-Ju Liu

2006-12-01T23:59:59.000Z

328

New Services for Building Maintenance Enabled by Building Automation  

NLE Websites -- All DOE Office Websites (Extended Search)

New Services for Building Maintenance Enabled by Building Automation New Services for Building Maintenance Enabled by Building Automation Systems Speaker(s): Heikki Ihasalo Date: May 17, 2007 - 12:00pm Location: 90-3122 Seminar Host/Point of Contact: Peng Xu Today's building automation systems enable building systems integration and access to information from a variety of sources, e.g. fire alarm systems, access control, security systems, lighting and control systems. With the help of Internet technology and XML (Extensible Markup Language) building automation systems can also connect to other enterprise\ applications such as facility management software, maintenance management systems, ERP or financial systems. New applications are also emerging to manage energy consumption in buildings, for example demand response and fault detection

329

Global health response more accurate with automated influenza surveillance  

NLE Websites -- All DOE Office Websites (Extended Search)

Global health response more accurate with automated influenza Global health response more accurate with automated influenza surveillance Global health response more accurate with automated influenza surveillance Public health officials will be able to determine whether an outbreak of an infectious disease comes from a pandemic strain or one less virulent. January 31, 2011 Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network Lance Green of LANL tests an earlier version of a modular laboratory like the ones that will be part of the High-Throughput Laboratory Network-a series of compact, self-contained, automated systems for surveillance and screening of potential pandemic strains of influenza and other deadly infectious diseases.

330

Automated construction technologies : analyses and future development strategies  

E-Print Network (OSTI)

Substandard productivity and the lack of skilled workers in the construction industry have led major corporations all over the world aiming to produce various types of automated construction technologies. During the process, ...

Hoang, Han (Han Mai)

2005-01-01T23:59:59.000Z

331

Proceedings of the 42nd annual Design Automation Conference  

Science Conference Proceedings (OSTI)

Welcome to the 42nd Design Automation Conference and the city of Anaheim! More than ever, DAC is the place where researchers and developers, industry and academia, exhibitors and their customers come to learn about the latest breakthroughs, the latest ...

William H. Joyner, Jr.; Grant E. Martin; Andrew B. Kahng

2005-06-01T23:59:59.000Z

332

Technical and System Requirements for Advanced Distribution Automation  

Science Conference Proceedings (OSTI)

Traditional distribution systems were designed to perform one function: distribute electrical energy to end-users. Advanced Distribution Automation (ADA) is a concept for a fully controllable and flexible distribution system that will facilitate the exchange of both electrical energy and information between participants and system components. This report presents background information on distribution automation technologies and develops a roadmap to achieve the ADA systems required for future power deli...

2004-06-09T23:59:59.000Z

333

Automated Demand Response Opportunities in Wastewater Treatment Facilities  

Science Conference Proceedings (OSTI)

Wastewater treatment is an energy intensive process which, together with water treatment, comprises about three percent of U.S. annual energy use. Yet, since wastewater treatment facilities are often peripheral to major electricity-using industries, they are frequently an overlooked area for automated demand response opportunities. Demand response is a set of actions taken to reduce electric loads when contingencies, such as emergencies or congestion, occur that threaten supply-demand balance, and/or market conditions occur that raise electric supply costs. Demand response programs are designed to improve the reliability of the electric grid and to lower the use of electricity during peak times to reduce the total system costs. Open automated demand response is a set of continuous, open communication signals and systems provided over the Internet to allow facilities to automate their demand response activities without the need for manual actions. Automated demand response strategies can be implemented as an enhanced use of upgraded equipment and facility control strategies installed as energy efficiency measures. Conversely, installation of controls to support automated demand response may result in improved energy efficiency through real-time access to operational data. This paper argues that the implementation of energy efficiency opportunities in wastewater treatment facilities creates a base for achieving successful demand reductions. This paper characterizes energy use and the state of demand response readiness in wastewater treatment facilities and outlines automated demand response opportunities.

Thompson, Lisa; Song, Katherine; Lekov, Alex; McKane, Aimee

2008-11-19T23:59:59.000Z

334

Automated Galaxy Morphology: A Fourier Approach  

E-Print Network (OSTI)

We use automated surface photometry and pattern classification techniques to morphologically classify galaxies. The two-dimensional light distribution of a galaxy is reconstructed using Fourier series fits to azimuthal profiles computed in concentric elliptical annuli centered on the galaxy. Both the phase and amplitude of each Fourier component have been studied as a function of radial bin number for a large collection of galaxy images using principal component analysis. We find that up to 90 percent of the variance in many of these Fourier profiles may be characterized in as few as 3 principal components and their use substantially reduces the dimensionality of the classification problem. We use supervised learning methods in the form of artificial neural networks to train galaxy classifiers that detect morphological bars at the 85-90 percent confidence level and can identify the Hubble type with a 1-sigma scatter of 1.5 steps on the 16-step stage axis of the revised Hubble system. Finally, we systematically characterize the adverse effects of decreasing resolution and S/N on the quality of morphological information predicted by these classifiers.

S. C. Odewahn; S. H. Cohen; R. A. Windhorst; N. S. Philip

2001-10-11T23:59:59.000Z

335

THE QUASIPERIODIC AUTOMATED TRANSIT SEARCH ALGORITHM  

Science Conference Proceedings (OSTI)

We present a new algorithm for detecting transiting extrasolar planets in time-series photometry. The Quasiperiodic Automated Transit Search (QATS) algorithm relaxes the usual assumption of strictly periodic transits by permitting a variable, but bounded, interval between successive transits. We show that this method is capable of detecting transiting planets with significant transit timing variations without any loss of significance-{sup s}mearing{sup -}as would be incurred with traditional algorithms; however, this is at the cost of a slightly increased stochastic background. The approximate times of transit are standard products of the QATS search. Despite the increased flexibility, we show that QATS has a run-time complexity that is comparable to traditional search codes and is comparably easy to implement. QATS is applicable to data having a nearly uninterrupted, uniform cadence and is therefore well suited to the modern class of space-based transit searches (e.g., Kepler, CoRoT). Applications of QATS include transiting planets in dynamically active multi-planet systems and transiting planets in stellar binary systems.

Carter, Joshua A. [Harvard-Smithsonian Center for Astrophysics, 60 Garden St., Cambridge, MA 02138 (United States); Agol, Eric [Department of Astronomy, Box 351580, University of Washington, Seattle, WA 98195 (United States)

2013-03-10T23:59:59.000Z

336

Automation Enhancement of Multilayer Laue Lenses  

SciTech Connect

X-ray optics fabrication at Brookhaven National Laboratory has been facilitated by a new, state of the art magnetron sputtering physical deposition system. With its nine magnetron sputtering cathodes and substrate carrier that moves on a linear rail via a UHV brushless linear servo motor, the system is capable of accurately depositing the many thousands of layers necessary for multilayer Laue lenses. I have engineered a versatile and automated control program from scratch for the base system and many subsystems. Its main features include a custom scripting language, a fully customizable graphical user interface, wireless and remote control, and a terminal-based interface. This control system has already been successfully used in the creation of many types of x-ray optics, including several thousand layer multilayer Laue lenses.Before reaching the point at which a deposition can be run, stencil-like masks for the sputtering cathodes must be created to ensure the proper distribution of sputtered atoms. Quality of multilayer Laue lenses can also be difficult to measure, given the size of the thin film layers. I employ my knowledge of software and algorithms to further ease these previously painstaking processes with custom programs. Additionally, I will give an overview of an x-ray optic simulator package I helped develop during the summer of 2010. In the interest of keeping my software free and open, I have worked mostly with the multiplatform Python and the PyQt application framework, utilizing C and C++ where necessary.

Lauer K. R.; Conley R.

2010-12-01T23:59:59.000Z

337

Collaborative recommender systems for building automation  

E-Print Network (OSTI)

Building Automation Systems (BASs) can save building owners money by reducing energy consumption while simultaneously preserving occupant comfort. There are algorithms that optimize this tradeoff, such as detecting which appliances are turned on without requiring expensive status detectors to be attached to each appliance. However, better ways are needed to determine which algorithms are best-suited to a particular building. This paper explores the idea of allowing building managers to automatically communicate among themselves and exchange ratings of individual monitoring and control algorithms in such a way that each building manager can then obtain predicted ratings for all algorithms that he has not yet tried personally. We allow individual algorithms to be replaced by using a blackboard architecture to loosen the coupling between them. We propose a recommender system that operates on a database of contributed ratings to predict ratings of untried algorithms. To explore this approach, we developed a prototype that seamlessly interacts with both emulated physical buildings and buildings simulated in software and we implemented several of the control algorithms described in previous works. We demonstrate a recommender system that selects between algorithms in various types of buildings. 1.

Michael Lemay; Jason J. Haas; Carl A. Gunter

2009-01-01T23:59:59.000Z

338

Developing Automated Methods of Waste Sorting  

SciTech Connect

The U.S. Department of Energy (DOE) analyzed the need complex-wide for remote and automated technologies as they relate to the treatment and disposal of mixed wastes. This analysis revealed that several DOE sites need the capability to open drums containing waste, visually inspect and sort the contents, and finally repackage the containers that are acceptable at a waste disposal facility such as the Waste Isolation Pilot Plant (WIPP) in New Mexico. Conditioning contaminated waste so that it is compatible with the WIPP criteria for storage is an arduous task whether the waste is contact handled (waste having radioactivity levels below 200 mrem/hr) or remote handled. Currently, WIPP non-compliant items are removed from the waste stream manually, at a rate of about one 55-gallon drum per day. Issues relating to contamination-based health hazards as well as repetitive motion health hazards are steering industry towards a more user-friendly, method of conditioning or sorting waste.

Shurtliff, Rodney Marvin

2002-08-01T23:59:59.000Z

339

Process development for automated solar cell and module production. Task 4: automated array assembly. Quarterly report No. 2  

DOE Green Energy (OSTI)

Installation of the cell preparation station into its new enclosure is now complete and operation verification tests have been performed. The detailed layout drawings of the Automated Lamination Station have been produced and construction has begun. All major and most minor components have been delivered by vendors. The station framework has been built and assembly of components is underway. The final drawings for the Automated Vacuum Chamber are being completed and the first in-house components are being fabricated.

Hagerty, J. J.

1981-01-15T23:59:59.000Z

340

Process development for automated solar-cell and module production. Task 4. Automated array assembly. Quarterly report No. 3  

DOE Green Energy (OSTI)

The Automated Lamination Station is mechanically complete and is currently undergoing final wiring. The high current driver and isolator boards have been completed and installed, and the main interface board is under construction. The automated vacuum chamber has had a minor redesign to increase stiffness and improve the cover open/close mechanism. Design of the Final Assembly Station has been completed and construction is underway.

Hagerty, J. J.; Gifford, M.

1981-04-15T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Neutron Scattering Experiment Automation with Python  

Science Conference Proceedings (OSTI)

The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory currently holds the Guinness World Record as the world most powerful pulsed spallation neutron source. Neutrons scattered off atomic nuclei in a sample yield important information about the position, motions, and magnetic properties of atoms in materials. A neutron scattering experiment usually involves sample environment control (temperature, pressure, etc.), mechanical alignment (slits, sample and detector position), magnetic field controllers, neutron velocity selection (choppers) and neutron detectors. The SNS Data Acquisition System (DAS) consists of real-time sub-system (detector read-out with custom electronics, chopper interface), data preprocessing (soft real-time) and a cluster of control and ancillary PCs. The real-time system runs FPGA firmware and programs running on PCs (C++, LabView) typically perform one task such as motor control and communicate via TCP/IP networks. PyDas is a set of Python modules that are used to integrate various components of the SNS DAS system. It enables customized automation of neutron scattering experiments in a rapid and flexible manner. It provides wxPython GUIs for routine experiments as well as IPython command line scripting. Matplotlib and numpy are used for data presentation and simple analysis. We will present an overview of SNS Data Acquisition System and PyDas architectures and implementation along with the examples of use. We will also discuss plans for future development as well as the challenges that have to be met while maintaining PyDas for 20+ different scientific instruments.

Zolnierczuk, Piotr A [ORNL; Riedel, Richard A [ORNL

2010-01-01T23:59:59.000Z

342

KSL Kuttler Automation Systems GmbH | Open Energy Information  

Open Energy Info (EERE)

KSL Kuttler Automation Systems GmbH KSL Kuttler Automation Systems GmbH Jump to: navigation, search Name KSL-Kuttler Automation Systems GmbH Place Dauchingen, Baden-Württemberg, Germany Zip 78083 Sector Solar Product KSL-Kuttler Automation Systems GmbH is a manufacturer of automation systems for the PCB-industry and solar industry. KSL Kuttler was acquired by Suntech in April 2008. Coordinates 48.090319°, 8.552377° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.090319,"lon":8.552377,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

343

Automated roller shades : Daylighting The New York Times Building  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated roller shades Automated roller shades Overview The architectural approach The owner's approach Daylighting field study Daylighting control systems Automated roller shades Procurement specifications Shades and Shade Controls Lighting Controls Visualizing daylight Commissioning/ verification Demand response Mainstream solutions Post-occupancy evaluation Publications Sponsors Project team Automated roller shades Automated roller shades manage daylight, solar heat gains, view, glare, privacy, and building appearance through changes in shade height. A roller shade consists of a fabric wrapped around a horizontal tube, which contains a tubular motor. The tubular motor rotates when ac- or dc- power is applied to it causing modulation in shade height. The control system can be designed to optimize numerous variables, the most common being control of direct sun. In this application, the shades were controlled to five preset heights that aligned with the architectural features of the façade - i.e., the vision portion of the window wall - so that direct sun penetrated no more than a specified distance from the window wall. The Times Company also requested that the shades control window glare, yet maximize the opportunity for view and daylight admission. Unnecessary up/down movement of the shade was to be minimized. Fabric choices (openness of the weave, color of the fabric facing toward the interior and exterior) were additional considerations in terms of appearance as well as visual comfort and daylighting benefits.

344

Open Automated Demand Response Communications Specification (Version 1.0)  

Science Conference Proceedings (OSTI)

The development of the Open Automated Demand Response Communications Specification, also known as OpenADR or Open Auto-DR, began in 2002 following the California electricity crisis. The work has been carried out by the Demand Response Research Center (DRRC), which is managed by Lawrence Berkeley National Laboratory. This specification describes an open standards-based communications data model designed to facilitate sending and receiving demand response price and reliability signals from a utility or Independent System Operator to electric customers. OpenADR is one element of the Smart Grid information and communications technologies that are being developed to improve optimization between electric supply and demand. The intention of the open automated demand response communications data model is to provide interoperable signals to building and industrial control systems that are preprogrammed to take action based on a demand response signal, enabling a demand response event to be fully automated, with no manual intervention. The OpenADR specification is a flexible infrastructure to facilitate common information exchange between the utility or Independent System Operator and end-use participants. The concept of an open specification is intended to allow anyone to implement the signaling systems, the automation server or the automation clients.

Piette, Mary Ann; Ghatikar, Girish; Kiliccote, Sila; Koch, Ed; Hennage, Dan; Palensky, Peter; McParland, Charles

2009-02-28T23:59:59.000Z

345

Process development for automated solar cell and module production. Task 4. Automated array assembly. Annual report  

DOE Green Energy (OSTI)

MBA has been working on the automated array assembly task of the Low-Cost Solar Array project. A baseline sequence for the manufacture of solar cell modules is specified. Starting with silicon wafers, the process goes through damage etching, texture etching, junction formation, plasma edge etch, aluminum back surface field formation, and screen printed metallization to produce finished solar cells which are then series connected on a ribbon and bonded into a finished glass, PVB, tedlar module. A number of steps required additional developmental effort to verify technical and economic feasibility. These steps include texture etching, plasma edge etch, aluminum back surface field formation, array layup and interconnect, and module edge sealing and framing.

Witham, C.R.

1979-06-12T23:59:59.000Z

346

Market transformation lessons learned from an automated demand response test in the Summer and Fall of 2003  

E-Print Network (OSTI)

of Fully Automated Demand Response in Large FacilitiesLearned from an Automated Demand Response Test in the SummerLearned from an Automated Demand Response Test in the Summer

Shockman, Christine; Piette, Mary Ann; ten Hope, Laurie

2004-01-01T23:59:59.000Z

347

DA (Distribution Automation) (Smart Grid Project) | Open Energy Information  

Open Energy Info (EERE)

DA (Distribution Automation) (Smart Grid Project) DA (Distribution Automation) (Smart Grid Project) Jump to: navigation, search Project Name DA (Distribution Automation) Country Netherlands Coordinates 52.132633°, 5.291266° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":52.132633,"lon":5.291266,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

348

title Automated Price and Demand Response Demonstration for Large Customers  

NLE Websites -- All DOE Office Websites (Extended Search)

Automated Price and Demand Response Demonstration for Large Customers Automated Price and Demand Response Demonstration for Large Customers in New York City using OpenADR booktitle International Conference for Enhanced Building Operations ICEBO year month address Montreal Quebec abstract p class p1 Open Automated Demand Response OpenADR an XML based information exchange model is used to facilitate continuous price responsive operation and demand response participation for large commercial buildings in New York who are subject to the default day ahead hourly pricing We summarize the existing demand response programs in New York and discuss OpenADR communication prioritization of demand response signals and control methods Building energy simulation models are developed and field tests are conducted to evaluate continuous energy management

349

International Automated Systems Inc IAUS | Open Energy Information  

Open Energy Info (EERE)

International Automated Systems Inc IAUS International Automated Systems Inc IAUS Jump to: navigation, search Name International Automated Systems Inc (IAUS) Place Salem, Utah Zip 84653 Product Has developed a lens-based technology for concentrating heat in STEGSs, which it plans to deploy at projects. Coordinates 42.554485°, -88.110549° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":42.554485,"lon":-88.110549,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

350

Automation and security of Supply (Smart Grid Project) | Open Energy  

Open Energy Info (EERE)

Automation and security of Supply (Smart Grid Project) Automation and security of Supply (Smart Grid Project) Jump to: navigation, search Project Name Automation and security of Supply Country Denmark Coordinates 56.26392°, 9.501785° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":56.26392,"lon":9.501785,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

351

Aescusoft GmbH Automation | Open Energy Information  

Open Energy Info (EERE)

Aescusoft GmbH Automation Aescusoft GmbH Automation Jump to: navigation, search Name Aescusoft GmbH Automation Place Ettenheim, Germany Zip 77955 Product Offers PV cell testing lines. Coordinates 48.256309°, 7.813654° Loading map... {"minzoom":false,"mappingservice":"googlemaps3","type":"ROADMAP","zoom":14,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"geoservice":"google","maxzoom":false,"width":"600px","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"copycoords":false,"static":false,"wmsoverlay":"","layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","locations":[{"text":"","title":"","link":null,"lat":48.256309,"lon":7.813654,"alt":0,"address":"","icon":"","group":"","inlineLabel":"","visitedicon":""}]}

352

Automated Demand Response Strategies and Commissioning CommercialBuilding Controls  

SciTech Connect

California electric utilities have been exploring the use of dynamic critical peak pricing (CPP) and other demand response programs to help reduce peaks in customer electric loads. CPP is a new electricity tariff design to promote demand response. This paper begins with a brief review of terminology regarding energy management and demand response, followed by a discussion of DR control strategies and a preliminary overview of a forthcoming guide on DR strategies. The final section discusses experience to date with these strategies, followed by a discussion of the peak electric demand savings from the 2005 Automated CPP program. An important concept identified in the automated DR field tests is that automated DR will be most successful if the building commissioning industry improves the operational effectiveness of building controls. Critical peak pricing and even real time pricing are important trends in electricity pricing that will require new functional tests for building commissioning.

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila; Linkugel, Eric

2006-05-01T23:59:59.000Z

353

PROBE: a feasibility demonstration of substation and distribution automation  

SciTech Connect

Substation and distribution automation has existed for a number of years with varying degrees of sophistication. Recently trial installations have been initiated utilizing digital computer technology and advanced electronics to accomplish automation of certain substation functions. Investigations are also under way of remote meter reading and customer load management. The PROBE project is a research investigation to determine the feasibility of sampling data and creation of a data base to achieve these functions using digital techniques. A key objective of PROBE is to demonstrate the feasibility of utilizing data base information to make sophisticated decisions automatically and achieve a degree of coordination between functions not hitherto attainable. The equipment used, test procedures and results are described. Experience from the PROBE feasibility demonstration and Phase 1 tests show that the described substation and distribution automation implementation techniques are viable.

Croghan, J.F. (Commonwealth Edison Co., Maywood, IL); Jenkins, D.R.; Rushden, F.A.; Bunch, J.B.; Gurr, G.P.

1977-01-01T23:59:59.000Z

354

Automated Dna Curvature Profile Reconstruction In Atomic Force  

E-Print Network (OSTI)

An automated algorithm is presented to determine the DNA molecule intrinsic curvature profiles and the molecular spatial orientations in Atomic Force Microscope images. The curvature is composed by static and dynamic contributions. The first one is the intrinsic curvature, vectorial function of the DNA nucletide sequence, while the second one is due to thermal noise. This algorithm allows to reconstruct the intrinsic curvature profile excluding the thermal contribution and detects fragment orientation on AFM image with a percentage of molecular-orientation detection of 96.79 % for molecules with a high curvature peak. The automated approach allows to minimize the processing time compared to semi-automated methods, avoids errors introduced from operator bias and increases the amount of available information.

Microscope Images Elisa; Elisa Ficarra; Daniele Masotti; Luca Benini; Michela Milano

2002-01-01T23:59:59.000Z

355

HEADLINE: DOE Pursues Automation in West Virginia Lab  

NLE Websites -- All DOE Office Websites (Extended Search)

HEADLINE: DOE Pursues Automation in West Virginia Lab HEADLINE: DOE Pursues Automation in West Virginia Lab By Elizabeth McGowan Hakan Inan can envision a day in the near future when electric utilities will be able to find and isolate faults, then restore service-in record time and without human intervention. His goal is to create a model for automating the process of locating a fault and reconfiguring the feeder. And in utility circles, it's considered very tricky because nobody has yet perfected the process, even though the hardware and software have become available during the last several years. Hakan Inan, is an electrical engineer for Science Applications International Corporation, providing support to the NETL Modern Grid Strategy Program through Research and Development Solutions, LLC, is experimenting with this technology in Morgantown, W.V.,

356

Automated Demand Response Technologies and Demonstration in New York City  

NLE Websites -- All DOE Office Websites (Extended Search)

Technologies and Demonstration in New York City Technologies and Demonstration in New York City using OpenADR Title Automated Demand Response Technologies and Demonstration in New York City using OpenADR Publication Type Report LBNL Report Number LBNL-6470E Year of Publication 2013 Authors Kim, Joyce Jihyun, Sila Kiliccote, and Rongxin Yin Date Published 09/2013 Publisher LBNL/NYSERDA Abstract Demand response (DR) - allowing customers to respond to reliability requests and market prices by changing electricity use from their normal consumption pattern - continues to be seen as an attractive means of demand-side management and a fundamental smart-grid improvement that links supply and demand. Since October 2011, the Demand Response Research Center at Lawrence Berkeley National Laboratory and New York State Energy Research and Development Authority have conducted a demonstration project enabling Automated Demand Response (Auto-DR) in large commercial buildings located in New York City using Open Automated Demand Response (OpenADR) communication protocols. In particular, this project focuses on demonstrating how OpenADR can automate and simplify interactions between buildings and various stakeholders in New York State including the independent system operator, utilities, retail energy providers, and curtailment service providers. In this paper, we present methods to automate control strategies via building management systems to provide event-driven demand response, price response and demand management based on OpenADR signals. We also present cost control opportunities under day-ahead hourly pricing for large customers and Auto-DR control strategies developed for demonstration buildings. Lastly, we discuss the communication architecture and Auto-DR system designed for the demonstration project to automate price response and DR participation.

357

Computer-automated controls for superconducting magnetic energy storage  

DOE Green Energy (OSTI)

A computer-automated control system that allows unmanned operation of the Superconducting Magnetic Energy Storage (SMES) system has been designed and almost completely installed at Los Alamos National Laboratory. In addition to unmanned operation, the computer offers continual monitoring and recording of all the important SMES signals, operator guidance in starting up and maintaining SMES, emergency shutdown control, and high-speed data acquisition for failure diagnosis. The major components of the computer-automated control system are two slave computers that perform the data acquisition and a master computer that performs the control.

Criscuolo, A.L.

1981-01-01T23:59:59.000Z

358

Certificates for Automated Clients Status of This Memo  

E-Print Network (OSTI)

This memo provides information to the Grid community regarding new class of certificates for automated Grid Clients. It does not define any standards or technical recommendations. Distribution is unlimited. Copyright Notice Copyright Global Grid Forum (2003). All Rights Reserved. In evaluating Grid technology for production use, several members of the DOESG community feel there is a need for another class of certificates to be used for authenticating automated clients that connect to Grid servers. The usage of these new certificates is different enough so that current CP policies will need to be updated. Contents

Stephen Chan Nersc/lbnl; Matt Crawford Fnal

2003-01-01T23:59:59.000Z

359

A Key-Distribution Scheme for Wireless Home Automation Networks  

E-Print Network (OSTI)

Wireless home automation networks are one example of how wireless technologies may soon become part of our daily life, yet security in existing products is woefully inadequate. An important problem in this area is the question of secure key distribution. In this paper we present a key-distribution scheme geared towards home automation networks, but applicable to other networks with related properties as well. Our approach uses a decentralized scheme that is designed to work on resource-poor devices, allows easy addition and removal of devices and limits the workload on the end user while guaranteeing the secrecy of the exchanged keys even in the presence of subverted nodes.

Arno Wacker; Timo Heiber; Holger Cermann

2004-01-01T23:59:59.000Z

360

Rockwell Automation & General Mills Teaming Profile | ENERGY STAR Buildings  

NLE Websites -- All DOE Office Websites (Extended Search)

Rockwell Automation & General Mills Teaming Profile Rockwell Automation & General Mills Teaming Profile Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial energy management Small business Service providers Service and product providers Verify applications for ENERGY STAR certification Design commercial buildings Energy efficiency program administrators Commercial and industrial program sponsors Associations State and local governments Federal agencies Tools and resources Training In This Section Campaigns Commercial building design Communications resources Energy management guidance Financial resources Portfolio Manager Products and purchasing Recognition Research and reports Service and product provider (SPP) resources

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System  

E-Print Network (OSTI)

Development and Evaluation of an Automated Annotation Pipeline and cDNA Annotation System Takeya, including an automated annotation pipeline that provides high-quality preliminary annotation for each

Gough, Julian

362

An Automated System for the Analysis of Gravity Waves and Other Mesoscale Phenomena  

Science Conference Proceedings (OSTI)

An automated near-real-time system for the surface analysis of gravity waves and other mesoscale phenomena is developed, tested, and applied to several cases. Five-minute observations from the Automated Surface Observing System (ASOS) network ...

Steven E. Koch; Stephen Saleeby

2001-12-01T23:59:59.000Z

363

Automation of a hydroelectric power station using variable-structure control systems  

Science Conference Proceedings (OSTI)

This article presents the basis and conception of, and some experimental results obtained from, the automation of a hydroelectric power station. The principle of this automation, the purpose of which was to maximize the active power supplied by the station, ...

J. Erschler; F. Roubellat; J. P. Vernhes

1974-01-01T23:59:59.000Z

364

Using Jini to Integrate Home Automation in a Distributed Software-System  

Science Conference Proceedings (OSTI)

The last few years, a tendency arose to integrate various programmable devices through ever expanding computer networks. One particular domain in which this evolution stood out clearly is home automation. The EIB standard defines a home automation solution ...

Peter Rigole; Tom Holvoet; Yolande Berbers

2002-04-01T23:59:59.000Z

365

Design and Performance Analysis of an Automated 10-Channel Solar Radiometer Instrument  

Science Conference Proceedings (OSTI)

An automated multichannel solar radiometer has been designed and fabricated by the Atmospheric Remote Sensing Laboratory at The University of Arizona. The automated radiometer has 10 separate silicon-photodiode-based channels that allow near-...

A. R. Ehsani; J. A. Reagan; W. H. Erxleben

1998-06-01T23:59:59.000Z

366

Automated ground maintenance and health management for autonomous unmanned aerial vehicles  

E-Print Network (OSTI)

Automated ground maintenance is a necessity for multi-UAV systems. Without such automation, these systems will become more of a burden than a benefit as human operators struggle to contend with maintenance operations for ...

Dale, Daniel R., M. Eng. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

367

Automated scoring for creative problem-solving ability with ideation-explanation modeling  

E-Print Network (OSTI)

Abstract. This paper describes an automated scorer for assessing students Creative Problem-Solving (CPS) abilities via modeling the intra-structure of students essays describing their thoughts on solving particular problems. The automated scorer aims

Hao-chuan Wang; Chun-yen Chang; Tsai-yen Li

2005-01-01T23:59:59.000Z

368

Design of an automated sorting and orienting machine for electronic pins  

E-Print Network (OSTI)

At the power electronics manufacturer SynQor, the printed circuit board (PCB) assembly line is fully automated with the exception of the step which inserts electronic pins into the PCBs. Past attempts to automate this ...

Chang, Michelle Sueway

2012-01-01T23:59:59.000Z

369

ETM (Distribution Network Automation on 10 kV cable line stations...  

Open Energy Info (EERE)

ETM (Distribution Network Automation on 10 kV cable line stations) (Smart Grid Project) Jump to: navigation, search Project Name ETM (Distribution Network Automation on 10 kV cable...

370

Functions and Requirements and Specifications for Replacement of the Computer Automated Surveillance System (CASS)  

SciTech Connect

Functional requirements and specifications document for system to replace tank farm computer automated waste tank surveillance system.

DOUKA, K.C.

2000-05-05T23:59:59.000Z

371

Automated forensic fingerprint analysis: a novel generic process model and container format  

Science Conference Proceedings (OSTI)

The automated forensic analysis of latent fingerprints poses a new challenge. While for the pattern recognition aspects involved, the required processing steps can be related to fingerprint biometrics, the common biometric model needs to be extended ... Keywords: automated dactyloscopy, automated forensic analysis, forensic container format, multibranched biometric process

Tobias Kiertscher; Claus Vielhauer; Marcus Leich

2011-03-01T23:59:59.000Z

372

Making technology homey: finding sources of satisfaction and meaning in home automation  

Science Conference Proceedings (OSTI)

Home and automation are not natural partners--one homey and the other cold. Most current automation in the home is packaged in the form of appliances. To better understand the current reality and possible future of living with other types of domestic ... Keywords: home automation, need finding

Leila Takayama; Caroline Pantofaru; David Robson; Bianca Soto; Michael Barry

2012-09-01T23:59:59.000Z

373

Abstract -The paper discusses automated substation data integration and analysis. Recorded data collected  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

Kezunovic, Mladen

374

Abstract--With the deregulation and restructuring of utility industry, many substation automation applications are being  

E-Print Network (OSTI)

Control and Data Acquisition (SCADA) and Energy Management System (EMS) applications of substation environment of substation automation project. It provides data to a number of application including automated1 Abstract--With the deregulation and restructuring of utility industry, many substation automation

375

On cost-effectiveness of human-centered and socially acceptable robot and automation systems  

Science Conference Proceedings (OSTI)

This paper considers human-centered and socially appropriate robots as well as automation systems within the context of their cost-effectiveness. Usually, the objection of system designers is that approaches for human-centered and socio-technical design ... Keywords: Cost-effective automation, Human factors, Human-centered systems, Robots, Socially appropriate automation, Socio-technical systems

Janko Cernetic

2003-06-01T23:59:59.000Z

376

Opportunities for Automated Demand Response in Wastewater Treatment  

NLE Websites -- All DOE Office Websites (Extended Search)

Opportunities for Automated Demand Response in Wastewater Treatment Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Title Opportunities for Automated Demand Response in Wastewater Treatment Facilities in California - Southeast Water Pollution Control Plant Case Study Publication Type Report LBNL Report Number LBNL-6056E Year of Publication 2012 Authors Olsen, Daniel, Sasank Goli, David Faulkner, and Aimee T. McKane Date Published 12/2012 Publisher CEC/LBNL Keywords market sectors, technologies Abstract This report details a study into the demand response potential of a large wastewater treatment facility in San Francisco. Previous research had identified wastewater treatment facilities as good candidates for demand response and automated demand response, and this study was conducted to investigate facility attributes that are conducive to demand response or which hinder its implementation. One years' worth of operational data were collected from the facility's control system, submetered process equipment, utility electricity demand records, and governmental weather stations. These data were analyzed to determine factors which affected facility power demand and demand response capabilities.

377

Automating the Selection of Fenestration Systems to Best Meet Daylighting  

NLE Websites -- All DOE Office Websites (Extended Search)

Automating the Selection of Fenestration Systems to Best Meet Daylighting Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Title Automating the Selection of Fenestration Systems to Best Meet Daylighting Performance Goals Publication Type Conference Paper LBNL Report Number LBNL-53003 Year of Publication 2003 Authors Fernandes, Luis L., and Konstantinos M. Papamichael Conference Name 2003 International Building Performance Simulation Association Conference Date Published 02/2003 Conference Location Eindhoven, Netherlands Call Number LBNL-53003 Abstract Traditional selection of fenestration systems follows a trial-and-error approach, i.e., iterative selection of fenestration systems and evaluation of their performance through the use of simulation tools and techniques. This paper is about the development of a new method, which inverts traditional practice, i.e., aims at automated selection of fenestration systems that best meet specific lighting performance goals. The new method is based on manipulation of matrices that represent the optical properties of fenestration systems, the propagation of light in interior spaces, and the outdoors luminous conditions. The method follows two steps: 1) the determination of the luminous flux distribution originating from the location of the fenestration that best meets the desired lighting performance goals and 2) the selection of the fenestration system that comes closer to producing the desired flux distribution from the outdoor daylight distribution.

378

Evidence algorithm and system for automated deduction: a retrospective view  

Science Conference Proceedings (OSTI)

A research project aimed at the development of an automated theorem proving system was started in Kiev (Ukraine) in early 1960s. The mastermind of the project, Academician V. Glushkov, baptized it "Evidence Algorithm", EA1. The work on the project lasted, ...

Alexander Lyaletski; Konstantin Verchinine

2010-07-01T23:59:59.000Z

379

The function of semantics in automated language processing  

Science Conference Proceedings (OSTI)

This paper is a survey of some of the major semantic models that have been developed for automated semantic analysis of natural language. Current approaches to semantic analysis and logical inference are based mainly on models of human cognitive processes ... Keywords: computational linguistics, grammars, natural language processing, semantics

Milos Pacak; Arnold W. Pratt

1971-04-01T23:59:59.000Z

380

Automated Source-Level Error Localization in Hardware Designs  

Science Conference Proceedings (OSTI)

Recent achievements in formal verification techniques allow for fault detection even in large real-world designs. Tool support for localizing the faulty statements is critical, because it reduces development time and overall project costs. Automated ... Keywords: design error diagnosis, software debugging, model-based diagnosis, fault localization

Bernhard Peischl; Franz Wotawa

2006-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Automated Temperature and Relative Humidity Calibrations for the Oklahoma Mesonetwork  

Science Conference Proceedings (OSTI)

A low-cost (under $12,000), fully automated, relative humidity calibration chamber capable of testing up to six probes simultaneously over a range of humidifies from 5% to approximately 95% is designed, constructed, and tested for use by the ...

Scott J. Richardson

1995-08-01T23:59:59.000Z

382

Making an automated monitoring system work at Tolt Dam  

SciTech Connect

A major upgrade of the dam safety program at Tolt Dam in Seattle, Washington is described. The upgrade was prompted by the age (30 years) of the dam, the addition of a hydroelectric plant, and public concern. The program is based on an automated condition monitoring and advance warning system. The design, implementation, and operating experience of the system are described.

Marilley, J.M. [Seattle Water Dept., WA (United States); Myers, B.K. [Woodward-Clyde Consultants, Seattle, WA (United States)

1996-10-01T23:59:59.000Z

383

A survey on communication networks for electric system automation  

Science Conference Proceedings (OSTI)

In today's competitive electric utility marketplace, reliable and real-time information become the key factor for reliable delivery of power to the end-users, profitability of the electric utility and customer satisfaction. The operational and commercial ... Keywords: Electric system automation, Internet based Virtual Private Network, Power line communication, Satellite communication, WiMAX, Wireless mesh networks, Wireless sensor networks

V. C. Gungor; F. C. Lambert

2006-05-01T23:59:59.000Z

384

Automated Analysis Using IED-Recorded Data: Implementation and Integration  

E-Print Network (OSTI)

-recorded substation data in an automatic way. It focuses on adding new automated functions built on the top of the substation IED database. There are several types of modern IEDs used in today's substations. Different file of integrating IED data collected by different IED types and then focuses on how to use the integrated substation

Kezunovic, Mladen

385

National SCADA Test Bed Substation Automation Evaluation Report  

Science Conference Proceedings (OSTI)

Increased awareness of the potential for cyber attack has recently resulted in improved cyber security practices associated with the electrical power grid. However, the level of practical understanding and deployment of cyber security practices has not been evenly applied across all business sectors. Much of the focus has been centered on information technology business centers and control rooms. This report explores the current level of substation automation, communication, and cyber security protection deployed in electrical substations throughout existing utilities in the United States. This report documents the evaluation of substation automation implementation and associated vulnerabilities. This evaluation used research conducted by Newton-Evans Research Company for some of its observations and results. The Newton Evans Report aided in the determination of what is the state of substation automation in North American electric utilities. Idaho National Laboratory cyber security experts aided in the determination of what cyber vulnerabilities may pose a threat to electrical substations. This report includes cyber vulnerabilities as well as recommended mitigations. It also describes specific cyber issues found in typical substation automation configurations within the electric utility industry. The evaluation report was performed over a 5-month period starting in October 2008

Kenneth Barnes; Briam Johnson

2009-10-01T23:59:59.000Z

386

Automated composition of Web services via planning in asynchronous domains  

Science Conference Proceedings (OSTI)

The service-oriented paradigm promises a novel degree of interoperability between business processes, and is leading to a major shift in way distributed applications are designed and realized. While novel and more powerful services can be obtained, in ... Keywords: Automated program synthesis, Planning, Web services

Piergiorgio Bertoli; Marco Pistore; Paolo Traverso

2010-03-01T23:59:59.000Z

387

The ironies of automation: still going strong at 30?  

Science Conference Proceedings (OSTI)

Motivation -- Bainbridge highlighted some of the ironies of automation 30 years ago and identified possible solutions. Society is now highly dependent on complex technological systems, so we assess our performance in addressing the ironies in ... Keywords: ergonomics, human factors, resilience, systems engineering

Gordon Baxter; John Rooksby; Yuanzhi Wang; Ali Khajeh-Hosseini

2012-08-01T23:59:59.000Z

388

An extensive study on automated Dewey Decimal Classification  

Science Conference Proceedings (OSTI)

In this paper, we present a theoretical analysis and extensive experiments on the automated assignment of Dewey Decimal Classification (DDC) classes to bibliographic data with a supervised machine-learning approach. Library classification systems, such ... Keywords: Dewey Decimal Classification, automatic classification, hierarchical classification, hierarchical models, tree structures

Jun Wang

2009-11-01T23:59:59.000Z

389

Automation of disassembly processes and its information systems  

Science Conference Proceedings (OSTI)

The recycling of the manufacturing products becomes a major concern in the majority of the industrialized countries. To be effective this one cannot be considered only in the ultimate stage of the life cycle of the product and must be more or less automated. ...

B. T. David; N. Boutros; K. Saikali; D. Chevron; S. Gerner; A. Skaf; Z. Binder; M. Dubois

1999-02-01T23:59:59.000Z

390

ARES: automated response function code. Users manual. [HPGAM and LSQVM  

SciTech Connect

This ARES user's manual provides detailed instructions for a general understanding of the Automated Response Function Code and gives step by step instructions for using the complete code package on a HP-1000 system. This code is designed to calculate response functions of NaI gamma-ray detectors, with cylindrical or rectangular geometries.

Maung, T.; Reynolds, G.M.

1981-06-01T23:59:59.000Z

391

Automating the mutation testing of aspect-oriented Java programs  

Science Conference Proceedings (OSTI)

Aspect-Oriented Programming has introduced new types of software faults that may be systematically tackled with mutation testing. However, such testing approach requires adequate tooling support in order to be properly performed. This paper addresses ... Keywords: aspect-oriented programming, mutation testing, test automation, testing tools

Fabiano Cutigi Ferrari; Elisa Yumi Nakagawa; Awais Rashid; Jos Carlos Maldonado

2010-05-01T23:59:59.000Z

392

An efficient electronic archiving approach for office automation  

Science Conference Proceedings (OSTI)

Recentlly, electronic archives are becoming very important for office automation. Minimizing the size of the stored data in electronic archive is a main issue to reduce the phyzical storage area. In this paper, the effect of different types of Arabic ... Keywords: cross correlation, electronic archiving, fast word detection, frequency domain

Hazem M. El-Bakry; Nikos Mastorakis

2009-06-01T23:59:59.000Z

393

A simulation tool for automated platooning in mixed highway scenarios  

Science Conference Proceedings (OSTI)

Automated platooning is one of the most challenging fields in the domain of ITS. Conceptually, platooning means creating clusters of vehicles which closely follow each other autonomously without action of the driver, neither for accelerating, nor for ... Keywords: cooperative adaptive cruise control, platooning, simulation, vehicular networks

Michele Segata; Falko Dressler; Renato Lo Cigno; Mario Gerla

2012-08-01T23:59:59.000Z

394

A Case Study in Automated Feeder Switching Map Creation  

Science Conference Proceedings (OSTI)

This project's objective was to autogenerate a set of custom paper maps of distribution systems to improve switching, reliability, and customer service. The paper maps were designed as a stop-gap measure to help operators until a long-term solution with a more automated interface that can display recloser and switch loops is developed.

2009-06-30T23:59:59.000Z

395

NIF ICCS Test Controller for Automated & Manual Testing  

SciTech Connect

The National Ignition Facility (NIF) Integrated Computer Control System (ICCS) is a large (1.5 MSLOC), hierarchical, distributed system that controls all aspects of the NIF laser [1]. The ICCS team delivers software updates to the NIF facility throughout the year to support shot operations and commissioning activities. In 2006, there were 48 releases of ICCS: 29 full releases, 19 patches. To ensure the quality of each delivery, thousands of manual and automated tests are performed using the ICCS Test Controller test infrastructure. The TestController system provides test inventory management, test planning, automated test execution and manual test logging, release testing summaries and test results search, all through a web browser interface. Automated tests include command line based frameworks server tests and Graphical User Interface (GUI) based Java tests. Manual tests are presented as a checklist-style web form to be completed by the tester. The results of all tests, automated and manual, are kept in a common repository that provides data to dynamic status reports. As part of the 3-stage ICCS release testing strategy, the TestController system helps plan, evaluate and track the readiness of each release to the NIF facility.

Zielinski, J S

2007-10-03T23:59:59.000Z

396

Assessing the reliability of an automated dose-rounding algorithm  

Science Conference Proceedings (OSTI)

Objective: Pediatric dose rounding is a unique and complex process whose complexity is rarely supported by e-prescribing systems, though amenable to automation and deployment from a central service provider. The goal of this project was to validate an ... Keywords: Biomedical informatics, Clinical practice, Computer software, Electronic prescribing, Medical informatics, Prescriptions

Kevin B. Johnson, Yun-Xian Ho, S. Andrew Spooner, Marvin Palmer, Stuart T. Weinberg

2013-10-01T23:59:59.000Z

397

A comparison of automation techniques for optimization of compressor scheduling  

Science Conference Proceedings (OSTI)

Compressor selection is one of the primary functions in operation of natural gas pipelines, and a major concern of the task is to minimize operating costs. This study presents a comparison of three automation techniques for compressor selection: mixed ... Keywords: Compressor selection optimization, Expert system, Genetic algorithms, Mixed integer linear programming

H. H. Nguyen; V. Uraikul; C. W. Chan; P. Tontiwachwuthikul

2008-03-01T23:59:59.000Z

398

Building the case for automated building energy management  

Science Conference Proceedings (OSTI)

Energy consumption in buildings comprises a significant fraction of total worldwide energy consumption and is strongly influenced by occupant behavior. To explore the quantitative effect of particular occupant actions on building energy consumption, ... Keywords: building automation, energy saving behaviors, in-home display

Alan Marchiori; Qi Han; William C. Navidi; Lieko Earle

2012-11-01T23:59:59.000Z

399

Design and Construction of an Automated Community Bicycle Loan/  

E-Print Network (OSTI)

$20 Box $50 Solar Power Panels $50 CPU $200 Total Per Unit $432 #12;Conclusion and Future · Lessons design and construct an automated community bike share system in-house in a cost efficient manner/Closed? #12;The Circuit · Parallel Port · 1 bit input · 1 bit output · 12 V and 5 V power #12;The RFID Antenna

Goadrich, Mark

400

Automated Energy Distribution and Reliability System (AEDR): Final Report  

Science Conference Proceedings (OSTI)

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Buche, D. L.

2008-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Automated Energy Distribution and Reliability System Status Report  

Science Conference Proceedings (OSTI)

This report describes Northern Indiana Public Service Co. project efforts to develop an automated energy distribution and reliability system. The purpose of this project was to implement a database-driven GIS solution that would manage all of the company's gas, electric, and landbase objects.

Buche, D. L.; Perry, S.

2007-10-01T23:59:59.000Z

402

Proceedings of the 49th Annual Design Automation Conference  

Science Conference Proceedings (OSTI)

It is a great pleasure to welcome you to the 49th annual edition of the Design Automation Conference, appropriately held in beautiful San Francisco. Since 1964, which is even before the beginning of Moore's law, DAC is the place where electronic systems ...

Patrick Groeneveld; Donatella Sciuto; Soha Hassoun

2012-06-01T23:59:59.000Z

403

Automation Schemes for FPGA Implementation of Wave-Pipelined Circuits  

Science Conference Proceedings (OSTI)

Operating frequencies of combinational logic circuits can be increased using Wave-Pipelining (WP), by adjusting the clock periods and clock skews. In this article, Built-In Self-Test (BIST) and System-on-Chip (SOC) approaches are proposed for automating ... Keywords: CORDIC, DAA, FPGA, SOC, pipelining, wave-pipelining

G. Seetharaman; B. Venkataramani

2009-06-01T23:59:59.000Z

404

Automation of port facilities for import of GNL  

Science Conference Proceedings (OSTI)

This article examines the implementation of port terminals intended for the import of liquified natural gas in Brazilian territory and its importance to assure the continuity of energy offer, which historically has been one of the main factors limiting ... Keywords: GNL, automation, power resources, regaseification, terminal

Andr Seichi Ribeiro Kuramoto; Nilson Magalhes Bueno; Walter Da Silva Frazo Filho; Eduardo Mario Dias; Caio Fernando Fontana

2009-07-01T23:59:59.000Z

405

Detecting and Forecasting Economic Regimes in Automated Exchanges  

E-Print Network (OSTI)

Detecting and Forecasting Economic Regimes in Automated Exchanges Wolfgang Ketter , John Collins. The agent can use this information to make both tactical decisions such as pricing and strategic decisions, such as over- supply or scarcity, from historical data using computational methods to construct price density

Ketter, Wolfgang

406

Detecting and Forecasting Economic Regimes in Automated Exchanges  

E-Print Network (OSTI)

Detecting and Forecasting Economic Regimes in Automated Exchanges Wolfgang Ketter # , John Collins tactical decisions such as pricing and strategic decisions such as product mix and production planning. We historical data using computational methods to construct price density functions. We discuss how

Ketter, Wolfgang

407

PERSPECTIVE Automated protein structure calculation from NMR data  

E-Print Network (OSTI)

PERSPECTIVE Automated protein structure calculation from NMR data Mike P. Williamson ? C. Jeremy completely automatic structure determination of small pro- teins of\\15 kDa, from NMR spectra to structure, particu- larly by structural genomics consortia. Keywords NMR structure calculation of proteins Á

Craven, Jeremy

408

Automated segmentation of tissue images for computerized IHC analysis  

Science Conference Proceedings (OSTI)

This paper presents two automated methods for the segmentation of immunohistochemical tissue images that overcome the limitations of the manual approach as well as of the existing computerized techniques. The first independent method, based on unsupervised ... Keywords: Image processing, Immunohistochemistry, Nuclear segmentation, Tissue images, Tissue segmentation

S. Di Cataldo; E. Ficarra; A. Acquaviva; E. Macii

2010-10-01T23:59:59.000Z

409

IT-Security for Safety-Critical Automation Systems  

E-Print Network (OSTI)

The protection of safety-critical and infrastructure systems (such as automation systems for utilities, but also for manufacturing plants) against electronic and communication network based attacks becomes more and more important. This paper investigates how such safety-critical plants and automation systems can be secured against information system and network based attacks. The two common approaches, hard perimeter, and defense-in-depth are discussed. Based on the defense-in-depth approach, a conceptional, generic security zone model for use in analysis and synthesis of a plant security architecture is proposed, and for each of its zones a survey of the available and appropriate security mechanisms is given. Using an example from the substation automation domain, it is shown how threats and counter-measures can be systematically derived and how the specific system and usage characteristics of automation systems (or at least their restricted safety critical sub-functions) can be exploited in a positive way to deploy security mechanisms that would in this form not be available and applicable to home or office information systems. 1.

Martin Naedele

2002-01-01T23:59:59.000Z

410

Improved Empty Vehicle Balancing in Automated Material Handling Systems  

Science Conference Proceedings (OSTI)

The use of automated guided vehicles in high-tech industries such as the semiconductor industry results, due to the size of such factories, in highly complex rail-networks. In contrast to the routing of vehicles that are transporting a lot to its destination, ... Keywords: Vehicle Balancing, AMHS, Semiconductor, Simulation

Roland Wertz; Christian Fischmann; Fabian Bttinger; Martin Kasperczyk

2008-04-01T23:59:59.000Z

411

An automated system for search and retrieval of trademarks  

Science Conference Proceedings (OSTI)

The number of trademarks is growing rapidly, which makes searching among a large database of trademarks very difficult. The aim has been to develop an automated system to facilitate searching, comparing and retrieving trademarks. In this paper, such ... Keywords: annotation, content-based image retrieval (CBIR), text-based image retrieval (TBIR), trademark

Faezeh Karamzadeh; Mohammad Abdollahi Azgomi

2009-08-01T23:59:59.000Z

412

Automated troubleshooting of a UMTS-WLAN test platform  

Science Conference Proceedings (OSTI)

Amongst troubleshooting tasks, correct diagnosis of faults is a complex and time consuming task. Bayesian Networks provide a modelling approach suitable to cater for the uncertainty inherent in human reasoning. The method presented in this paper, valid ... Keywords: analysis, automated troubleshooting, test platform

Ronan Skehill; Sean McGrath; Carlos Antonio de Ramos

2008-03-01T23:59:59.000Z

413

Driving Secure Software Development Experience in a Diverse Product Environment  

Science Conference Proceedings (OSTI)

Siemens' central security team drives secure software development across a diverse product portfolio. From factory automation to wind turbines, Siemens builds security in by activities including standardizing roles and responsibilities, threat and risk ... Keywords: Siemens, secure software development, risk analysis, threat analysis, software engineering

Barbara Fichtinger; Frances Paulisch; Peter Panholzer

2012-03-01T23:59:59.000Z

414

Definition: Automated Voltage And Var Control | Open Energy Information  

Open Energy Info (EERE)

Voltage And Var Control Voltage And Var Control Jump to: navigation, search Dictionary.png Automated Voltage And Var Control Automated voltage and VAR control requires coordinated operation of reactive power resources such as capacitor banks, voltage regulators, transformer load-tap changers, and distributed generation (DG) with sensors, controls, and communications systems. These devices could operate autonomously in response to local events or in response to signals from a central control system.[1] View on Wikipedia Wikipedia Definition Also Known As Volt-VAR Control (VVC) Related Terms smart grid, Reactive Power References ↑ SmartGrid.gov 'Description of Functions' An i LikeLike UnlikeLike You like this.Sign Up to see what your friends like. nline Glossary Definition Retrieved from

415

Optimizing automated gas turbine fault detection using statistical pattern recognition  

SciTech Connect

A method enabling the automated diagnosis of Gas Turbine Compressor blade faults, based on the principles of statistical pattern recognition is initially presented. The decision making is based on the derivation of spectral patterns from dynamic measurements data and then the calculation of discriminants with respect to reference spectral patterns of the faults while it takes into account their statistical properties. A method of optimizing the selection of discriminants using dynamic measurements data is also presented. A few scalar discriminants are derived, in such a way that the maximum available discrimination potential is exploited. In this way the success rate of automated decision making is further improved, while the need for intuitive discriminant selection is eliminated. The effectiveness of the proposed methods is demonstrated by application to data coming from an Industrial Gas Turbine while extension to other aspects of Fault Diagnosis is discussed. 9 refs.

Loukis, E.; Mathioudakis, K.; Papailiou, K. (Athens National Technical Univ. (Greece))

1992-01-01T23:59:59.000Z

416

Optimizing automated gas turbine fault detection using statistical pattern recognition  

SciTech Connect

A method enabling the automated diagnosis of gas turbine compressor blade faults, based on the principles of statistical pattern recognition, is initially presented. The decision making is based on the derivation of spectral patterns from dynamic measurement data and then the calculation of discriminants with respect to reference spectral patterns of the faults while it takes into account their statistical properties. A method of optimizing the selection of discriminants using dynamic measurement data is also presented. A few scalar discriminants are derived, in such a way that the maximum available discrimination potential is exploited. In this way the success rate of automated decision making is further improved, while the need for intuitive discriminant selection is eliminated. The effectiveness of the proposed methods is demonstrated by application to data coming from an industrial gas turbine while extension to other aspects of fault diagnosis is discussed.

Loukis, E.; Mathioudakis, K.; Papailiou, K. (National Technical Univ. of Athens (Greece). Lab. of Thermal Turbomachines)

1994-01-01T23:59:59.000Z

417

A tool for automated resource consumption profiling of distributed transactions  

E-Print Network (OSTI)

Abstract. In this paper, we present a tool, called Autoprofiler, that automates the discovery of resource consumption by transactions on distributed systems. Such information is required as input to performance analysis tools, which may be used for capacity planning, for rearchitecting a distributed system, or to identify potential bottlenecks. Deriving this information using existing tools is a tedious and error prone process. In contrast, our tool requires minimal human intervention, and brings down the time required to profile complex distributed systems to a few minutes. It does this by co-ordinating the process of load generation and server resource profiling. Our tool also works with a Java profiler, called LiteJava Profiler, which we have built, to fully automate the process of resource consumption discovery for J2EE servers. 1

B. Nagaprabhanjan; Varsha Apte

2005-01-01T23:59:59.000Z

418

A data automation system at Los Alamos National Laboratory.  

Science Conference Proceedings (OSTI)

Idaho National Engineering and Environmental Laboratory (INEEL) has developed an automated computer program, Data Review Expert System (DRXS), for reviewing nondestructive assay (NDA) data. DRXS significantly reduces the data review time needed to meet characterization requirements for the Waste Isolation Pilot Plant (WIPP). Los Alamos National Laboratory (LANL) is in the process of developing a computer program, Software System Logic for Intelligent Certification (SSLIC), to automate other tasks associa ted with characterization of Transuranic Waste (TRU) samples. LANL has incorporated a version of DRXS specific to LANL's isotopic data into SSLIC. This version of SSLIC was audited by the National Transuranic Program on October, 24, 2001. This paper will present the results of the audit, and discuss future plans for SSLIC including the integration on the INEELLANL developed Rule Editor.

Betts, S. E. (Stephen E.); Schneider, C. M. (Connie M.); Pickrell, M. M. (Mark Manley)

2001-01-01T23:59:59.000Z

419

IT Security for Automation Systems Motivations and Mechanisms  

E-Print Network (OSTI)

The protection of safety-critical and infrastructure systems (such as automation systems for utilities, but also for manufacturing plants) against electronic and communication network based attacks becomes more and more important. This paper examines how such safety-critical plants and automation systems can be secured against information system and network based attacks. Based on the defense-in-depth approach, a conceptional, generic security zone model for use in analysis and synthesis of a plant security architecture is proposed, and for each of its zones a survey of the available and appropriate security mechanisms for delay, detection, and reaction is given. Der Schutz von sicherheitskritischen Systemen und Infrastruktureinrichtungen (wie zum Beispiel der Automatisierungsanlagen von Versorgungsunternehmen, aber auch von Fabrikationsanlagen) gegen

Martin Naedele; Abb Schweiz Ag

2004-01-01T23:59:59.000Z

420

Automating the determination of 3D protein structure  

SciTech Connect

The creation of an automated method for determining 3D protein structure would be invaluable to the field of biology and presents an interesting challenge to computer science. Unfortunately, given the current level of protein knowledge, a completely automated solution method is not yet feasible, therefore, our group has decided to integrate existing databases and theories to create a software system that assists X-ray crystallographers in specifying a particular protein structure. By breaking the problem of determining overall protein structure into small subproblems, we hope to come closer to solving a novel structure by solving each component. By generating necessary information for structure determination, this method provides the first step toward designing a program to determine protein conformation automatically.

Rayl, K.D.

1993-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Development of an Automated Pit Packaging System for Pantex  

E-Print Network (OSTI)

Sandia National Laboratories is developing a system that uses robots to package pits at Pantex in the AT-400A pit storage and transportation container. This report will give an overview of the AT-400A packaging process, and the parts of the overall AT-400A packaging operation that will be performed robotically. The process employed to move from development in the laboratory at Sandia to production use at Pantex will be described. Finally, important technology components being developed for and incorporated into the robotic system will be described. ____________________________________________________________________________ 2 Development of an Automated Pit Packaging System for Pantex Intentionally Left Blank ______________________________________________________________________________ Development of an Automated Pit Packaging System for Pantex 3 Contents 1. Introduction........................................................................................................... 7 ...

Jill Fahrenholtz Manufacturing; System For Pantex; Jill C. Fahrenholtz

1997-01-01T23:59:59.000Z

422

NETL Crosscutting: Instrumentation, Controls & Automation Interest Group  

NLE Websites -- All DOE Office Websites (Extended Search)

Advanced Research Advanced Research 2012 Conference Proceedings Instrumentation, Controls & Automation Interest Group Meeting June 6-7, 2012 The Department of Energy National Energy Technology Laboratory Crosscutting Research program and the Electric Power Research Institute (EPRI) together hosted the Instrumentation, Controls, and Automation Interest Group Meeting to address sensors and controls research for the power industry. This meeting was held in conjunction with the 2012 ISA POWID Conference on June 6-7, 2012. The goal was to share ongoing research activities, exchange ideas and collect information from power industry to identify potential future topics that can be used in new solicitation. Several topics were covered to stimulate discussion in areas that included wireless technologies, fiber optic sensors, model based control, cyber security and advances in sensors. The interactive discussions were captured, and can be accessed in the meeting notes [PDF-149KB].

423

Less Impact Of Power Failures Due To Substation Automation  

E-Print Network (OSTI)

This paper is an attempt to convey that SA can be used to effectively deal with the problems of power interruptions, in that its devices serve as data sources to assess the actual service conditions of main capital plant items, and in that they enable automated and intelligent power restoration procedures as a measure to reduce the power interruption duration, and to avoid the consequences of loss of power for the consumer ' s business

Volker Lohmann Abb; Volker Lohmann; Otto Preiss

1999-01-01T23:59:59.000Z

424

Automated defect spatial signature analysis for semiconductor manufacturing process  

DOE Patents (OSTI)

An apparatus and method for performing automated defect spatial signature alysis on a data set representing defect coordinates and wafer processing information includes categorizing data from the data set into a plurality of high level categories, classifying the categorized data contained in each high level category into user-labeled signature events, and correlating the categorized, classified signature events to a present or incipient anomalous process condition.

Tobin, Jr., Kenneth W. (Harriman, TN); Gleason, Shaun S. (Knoxville, TN); Karnowski, Thomas P. (Knoxville, TN); Sari-Sarraf, Hamed (Knoxville, TN)

1999-01-01T23:59:59.000Z

425

AutoDipole - Automated generation of dipole subtraction terms -  

E-Print Network (OSTI)

We present an automated generation of the subtraction terms for next-to-leading order QCD calculations in the Catani-Seymour dipole formalism. For a given scattering process with n external particles our Mathematica package generates all dipole terms, allowing for both massless and massive dipoles. The numerical evaluation of the subtraction terms proceeds with MadGraph, which provides Fortran code for the necessary scattering amplitudes. Checks of the numerical stability are discussed.

K. Hasegawa; S. Moch; P. Uwer

2009-11-23T23:59:59.000Z

426

An Automated Home Made Low Cost Vibrating Sample Magnetometer  

E-Print Network (OSTI)

The design and operation of a homemade low cost vibrating sample magnetometer is described here. The sensitivity of this instrument is better than 10-2 emu and found to be very efficient for the measurement of magnetization of most of the ferromagnetic and other magnetic materials as a function of temperature down to 77 K and magnetic field upto 800 Oe. Both M(H) and M(T) data acquisition are fully automated employing computer and Labview software

Kundu, S

2011-01-01T23:59:59.000Z

427

Automated closure system for nuclear reactor fuel assemblies  

DOE Patents (OSTI)

A welder for automated closure of fuel pins by a pulsed magnetic process in which the open end of a length of cladding is positioned within a complementary tube surrounded by a pulsed magnetic welder. Seals are provided at each end of the tube, which can be evacuated or can receive tag gas for direct introduction to the cladding interior. Loading of magnetic rings and end caps is accomplished automatically in conjunction with the welding steps carried out within the tube.

Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA)

1985-01-01T23:59:59.000Z

428

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents (OSTI)

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, the enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots. 9 figs.

Weiss, R.B.; Kimball, A.W.; Gesteland, R.F.; Ferguson, F.M.; Dunn, D.M.; Di Sera, L.J.; Cherry, J.L.

1995-11-28T23:59:59.000Z

429

Automated hybridization/imaging device for fluorescent multiplex DNA sequencing  

DOE Patents (OSTI)

A method is disclosed for automated multiplex sequencing of DNA with an integrated automated imaging hybridization chamber system. This system comprises an hybridization chamber device for mounting a membrane containing size-fractionated multiplex sequencing reaction products, apparatus for fluid delivery to the chamber device, imaging apparatus for light delivery to the membrane and image recording of fluorescence emanating from the membrane while in the chamber device, and programmable controller apparatus for controlling operation of the system. The multiplex reaction products are hybridized with a probe, then an enzyme (such as alkaline phosphatase) is bound to a binding moiety on the probe, and a fluorogenic substrate (such as a benzothiazole derivative) is introduced into the chamber device by the fluid delivery apparatus. The enzyme converts the fluorogenic substrate into a fluorescent product which, when illuminated in the chamber device with a beam of light from the imaging apparatus, excites fluorescence of the fluorescent product to produce a pattern of hybridization. The pattern of hybridization is imaged by a CCD camera component of the imaging apparatus to obtain a series of digital signals. These signals are converted by the controller apparatus into a string of nucleotides corresponding to the nucleotide sequence an automated sequence reader. The method and apparatus are also applicable to other membrane-based applications such as colony and plaque hybridization and Southern, Northern, and Western blots.

Weiss, Robert B. (Salt Lake City, UT); Kimball, Alvin W. (Salt Lake City, UT); Gesteland, Raymond F. (Salt Lake City, UT); Ferguson, F. Mark (Salt Lake City, UT); Dunn, Diane M. (West Valley City, UT); Di Sera, Leonard J. (Salt Lake City, UT); Cherry, Joshua L. (Salt Lake City, UT)

1995-01-01T23:59:59.000Z

430

Field demonstrations of communication systems for distribution automation. Final report  

Science Conference Proceedings (OSTI)

This report summarizes the results of a field demonstration of the use of UHF radio links in the 950-MHz portion of the spectrum as a communication medium for performing automated electric power distribution. Prototype radiohardware was combined with logic and control equipment developed by Westinghouse for power-line carrier automated distribution systems. Transceivers were used in the remote interactive terminals. 3dbm transceivers were used in the Central Base Station and the three Primary Radio Terminals, which functioned as system repeaters. Pre-installation field-strength measurements were made along selected radials and in spot locations to characterize the anticipated field-strength contours that would be encountered during the operational testing. A propagation model was developed that accurately predicted the conditions actually recorded. Post-installation measurements were used to further calibrate the computer model. The resulting propagation analysis proved exceedingly effective in characterizing a UHF radio system for digital communication. Data collected during a 10-month operational period supports the conclusion that 950-MHz radio is a viable communications medium for performing utility automated distribution functions. The system consists of 250 remote terminals, each interrogated from three sites. This provides 750 paths for communication performance evaluation.The reliability of the prototype radio units used in this project fell below that predicted through MTBF analysis, and did not meet utility reliability standards. The logic and control circuitry and central station required very little maintenance during the test.

Not Available

1981-06-01T23:59:59.000Z

431

Design and Control of a Fully Automated Vehicle door  

E-Print Network (OSTI)

The objective of the research was to develop a fully automated vehicle car door that can detect any object obstructing its path during operation. A fully automated door concept has not yet been implemented in the car industry. The door, operated via a pull of the door handle, utilizes an IR sensor to detect objects in its path. The vehicle door utilizes a linear direct current (DC) actuator with a built in potentiometer to power and control the vehicle door. The built in potentiometer provides feedback to the system. Proportional integral (PI) control was implemented to the system in order to provide a smoother and safer operation. The rise time of the system is 0.77 seconds and settling time is 1.07 seconds. The operation time is 3 seconds for the door to either open or close. The automated door has greater benefits compared to a manually operated door, such as ensuring greater safety in door operation and enhancing the lifetime as the door will not be slammed during its cycle. In addition, the door will provide more convenience to physically challenged people, as they will be able to open and close the door with the push of a button.

Hong, Kyung-Min

2010-05-01T23:59:59.000Z

432

A Automated Tool for Supporting FMEAs of Digital Systems  

SciTech Connect

Although designs of digital systems can be very different from each other, they typically use many of the same types of generic digital components. Determining the impacts of the failure modes of these generic components on a digital system can be used to support development of a reliability model of the system. A novel approach was proposed for such a purpose by decomposing the system into a level of the generic digital components and propagating failure modes to the system level, which generally is time-consuming and difficult to implement. To overcome the associated issues of implementing the proposed FMEA approach, an automated tool for a digital feedwater control system (DFWCS) has been developed in this study. The automated FMEA tool is in nature a simulation platform developed by using or recreating the original source code of the different module software interfaced by input and output variables that represent physical signals exchanged between modules, the system, and the controlled process. For any given failure mode, its impacts on associated signals are determined first and the variables that correspond to these signals are modified accordingly by the simulation. Criteria are also developed, as part of the simulation platform, to determine whether the system has lost its automatic control function, which is defined as a system failure in this study. The conceptual development of the automated FMEA support tool can be generalized and applied to support FMEAs for reliability assessment of complex digital systems.

Yue,M.; Chu, T.-L.; Martinez-Guridi, G.; Lehner, J.

2008-09-07T23:59:59.000Z

433

Assessment of Commercial Building Automation and Energy Management Systems for Demand Response Applications  

Science Conference Proceedings (OSTI)

This Technical Update is an overview of commercial building automation and energy management systems with a focus on their capabilities (current and future), especially in support of demand response (DR). The report includes background on commercial building automation and energy management systems; a discussion of demand response applications in commercial buildings, including building loads and control strategies; and a review of suppliers building automation and energy management systems to support d...

2009-12-14T23:59:59.000Z

434

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small- and Medium-Size Building Automation and Control System Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 2, 2013 2 | Building Technologies Office eere.energy.gov Problem Statement * Less than 10% of the buildings have building automation systems (BAS) * Over 90% of buildings stock either: - small (<5,000 sf) or - medium-sized (between 5,000 sf and 50,000 sf)

435

Small- and Medium-Size Building Automation and Control System Needs: Scoping Study  

NLE Websites -- All DOE Office Websites (Extended Search)

Small- and Medium-Size Building Automation and Control System Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Small- and Medium-Size Building Automation and Control System Needs: Scoping Study Michael Brambley, Ph.D. Pacific Northwest National Laboratory Michael.Brambley@pnnl.gov (509) 375-6875 April 2, 2013 2 | Building Technologies Office eere.energy.gov Problem Statement * Less than 10% of the buildings have building automation systems (BAS) * Over 90% of buildings stock either: - small (<5,000 sf) or - medium-sized (between 5,000 sf and 50,000 sf)

436

Modeling object identification and tracking errors on automated spatial safety assessment of earthmoving operations.  

E-Print Network (OSTI)

??Recent research studies have been conducted for automating the safety assessment process in order to identify risks and safety hazards on a job site without (more)

Chi, Seok Ho

2010-01-01T23:59:59.000Z

437

Automated Demand Response: The Missing Link in the Electricity Value Chain  

E-Print Network (OSTI)

Laboratory. Berkeley. Demand Response Research Center,and Automated Demand Response in Wastewater TreatmentLaboratory. Berkeley. Demand Response Research Center,

McKane, Aimee

2010-01-01T23:59:59.000Z

438

Automated Demand Response: The Missing Link in the Electricity Value Chain  

E-Print Network (OSTI)

and Open Automated Demand Response. In Grid Interop Forum.Berkeley National Laboratory. Demand Response ResearchCenter, Demand Response Research Center PIER Team Briefing,

McKane, Aimee

2010-01-01T23:59:59.000Z

439

Architecture Concepts and Technical Issues for an Open, Interoperable Automated Demand Response Infrastructure  

E-Print Network (OSTI)

energy efficiency and demand response in large facilities.was sponsored by the Demand Response Research Center whichInteroperable Automated Demand Response Infrastructure Ed

Koch, Ed; Piette, Mary Ann

2008-01-01T23:59:59.000Z

440

Fast Automated Demand Response to Enable the Integration of Renewable Resources  

E-Print Network (OSTI)

Consulting), and Dave Shroyer (SCG). Demand Response andOpen Automated Demand Response Opportunities for DataIAW Research Team, Demand Response Research Center, Lawrence

Watson, David S.

2013-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Automated Critical Peak Pricing Field Tests: 2006 Pilot Program Description and Results  

E-Print Network (OSTI)

Techniques for Demand Response. Lawrence BerkeleyCommunications for DemandResponseandEnergyEfficiencyfor Automated Demand Response Demonstration. 2004.

Piette, Mary Ann; Watson, David; Motegi, Naoya; Kiliccote, Sila

2007-01-01T23:59:59.000Z

442

Open Automated Demand Response Communications in Demand Response for Wholesale Ancillary Services  

E-Print Network (OSTI)

A. Barat, D. Watson. 2006 Demand Response Spinning ReserveKueck, and B. Kirby 2008. Demand Response Spinning ReserveReport 2009. Open Automated Demand Response Communications

Kiliccote, Sila

2010-01-01T23:59:59.000Z

443

Rnnotator: an automated de novo transcriptome assembly pipeline from stranded RNA-Seq reads  

E-Print Network (OSTI)

transcriptome assembly pipeline from stranded RNA-Seq readsRnnotator assembly pipeline. Figure 2. Read dereplicationan automated software pipeline that generates transcript

Martin, Jeffrey

2011-01-01T23:59:59.000Z

444

Automated Demand Response Technology Demonstration Project for Small and  

NLE Websites -- All DOE Office Websites (Extended Search)

Technology Demonstration Project for Small and Technology Demonstration Project for Small and Medium Commercial Buildings Title Automated Demand Response Technology Demonstration Project for Small and Medium Commercial Buildings Publication Type Report LBNL Report Number LBNL-4982E Year of Publication 2011 Authors Page, Janie, Sila Kiliccote, Junqiao Han Dudley, Mary Ann Piette, Albert K. Chiu, Bashar Kellow, Edward Koch, and Paul Lipkin Date Published 07/2011 Publisher CEC/LBNL Keywords demand response, emerging technologies, market sectors, medium commercial business, openadr, small commercial, small commercial business, technologies Abstract Small and medium commercial customers in California make up about 20-25% of electric peak load in California. With the roll out of smart meters to this customer group, which enable granular measurement of electricity consumption, the investor-owned utilities will offer dynamic prices as default tariffs by the end of 2011. Pacific Gas and Electric Company, which successfully deployed Automated Demand Response (AutoDR) Programs to its large commercial and industrial customers, started investigating the same infrastructures application to the small and medium commercial customers. This project aims to identify available technologies suitable for automating demand response for small-medium commercial buildings; to validate the extent to which that technology does what it claims to be able to do; and determine the extent to which customers find the technology useful for DR purpose. Ten sites, enabled by eight vendors, participated in at least four test AutoDR events per site in the summer of 2010. The results showed that while existing technology can reliably receive OpenADR signals and translate them into pre-programmed response strategies, it is likely that better levels of load sheds could be obtained than what is reported here if better understanding of the building systems were developed and the DR response strategies had been carefully designed and optimized for each site.

445

AUTOMATING GROUNDWATER SAMPLING AT HANFORD THE NEXT STEP  

Science Conference Proceedings (OSTI)

Historically, the groundwater monitoring activities at the Department of Energy's Hanford Site in southeastern Washington State have been very "people intensive." Approximately 1500 wells are sampled each year by field personnel or "samplers." These individuals have been issued pre-printed forms showing information about the well(s) for a particular sampling evolution. This information is taken from 2 official electronic databases: the Hanford Well information System (HWIS) and the Hanford Environmental Information System (HEIS). The samplers used these hardcopy forms to document the groundwater samples and well water-levels. After recording the entries in the field, the samplers turned the forms in at the end of the day and other personnel posted the collected information onto a spreadsheet that was then printed and included in a log book. The log book was then used to make manual entries of the new information into the software application(s) for the HEIS and HWIS databases. A pilot project for automating this extremely tedious process was lauched in 2008. Initially, the automation was focused on water-level measurements. Now, the effort is being extended to automate the meta-data associated with collecting groundwater samples. The project allowed electronic forms produced in the field by samplers to be used in a work flow process where the data is transferred to the database and electronic form is filed in managed records - thus eliminating manually completed forms. Elimating the manual forms and streamlining the data entry not only improved the accuracy of the information recorded, but also enhanced the efficiency and sampling capacity of field office personnel.

CONNELL CW; CONLEY SF; HILDEBRAND RD; CUNNINGHAM DE; R_D_Doug_Hildebrand@rl.gov; DeVon_E_Cunningham@rl.gov

2010-01-21T23:59:59.000Z

446

Reference Model for Control and Automation Systems in Electrical Power  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Reference Model Reference Model for Control and Automation Systems in Electrical Power Version 1.2 October 12, 2005 Prepared by: Sandia National Laboratories' Center for SCADA Security Jason Stamp, Technical Lead Michael Berg, Co-Technical Lead Michael Baca, Project Lead This work was conducted for the DOE Office of Electricity Delivery and Energy Reliability under Contract M64SCADSNL Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000. 2 Contents 1 Executive Summary.................................................................................................3 2 Introduction..............................................................................................................4

447

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect

The Lawrence Berkeley National Laboratory (LBNL) Demand Response Research Center (DRRC) demonstrated and evaluated open automated demand response (OpenADR) communication infrastructure to reduce winter morning and summer afternoon peak electricity demand in commercial buildings the Seattle area. LBNL performed this demonstration for the Bonneville Power Administration (BPA) in the Seattle City Light (SCL) service territory at five sites: Seattle Municipal Tower, Seattle University, McKinstry, and two Target stores. This report describes the process and results of the demonstration. OpenADR is an information exchange model that uses a client-server architecture to automate demand-response (DR) programs. These field tests evaluated the feasibility of deploying fully automated DR during both winter and summer peak periods. DR savings were evaluated for several building systems and control strategies. This project studied DR during hot summer afternoons and cold winter mornings, both periods when electricity demand is typically high. This is the DRRC project team's first experience using automation for year-round DR resources and evaluating the flexibility of commercial buildings end-use loads to participate in DR in dual-peaking climates. The lessons learned contribute to understanding end-use loads that are suitable for dispatch at different times of the year. The project was funded by BPA and SCL. BPA is a U.S. Department of Energy agency headquartered in Portland, Oregon and serving the Pacific Northwest. BPA operates an electricity transmission system and markets wholesale electrical power at cost from federal dams, one non-federal nuclear plant, and other non-federal hydroelectric and wind energy generation facilities. Created by the citizens of Seattle in 1902, SCL is the second-largest municipal utility in America. SCL purchases approximately 40% of its electricity and the majority of its transmission from BPA through a preference contract. SCL also provides ancillary services within its own balancing authority. The relationship between BPA and SCL creates a unique opportunity to create DR programs that address both BPA's and SCL's markets simultaneously. Although simultaneously addressing both market could significantly increase the value of DR programs for BPA, SCL, and the end user, establishing program parameters that maximize this value is challenging because of complex contractual arrangements and the absence of a central Independent System Operator or Regional Transmission Organization in the northwest.

Kiliccote, Sila; Piette, Mary Ann; Dudley, Junqiao

2010-03-17T23:59:59.000Z

448

Automated Comparison of Building Energy Simulation Engines (Presentation)  

SciTech Connect

This presentation describes the BEopt comparative test suite, which is a tool that facilitates the automated comparison of building energy simulation engines. It also demonstrates how the test suite is improving the accuracy of building energy simulation programs. Building energy simulation programs inform energy efficient design for new homes and energy efficient upgrades for existing homes. Stakeholders rely on accurate predictions from simulation programs. Previous research indicates that software tends to over-predict energy usage for poorly-insulated leaky homes. NREL is identifying, investigating, and resolving software inaccuracy issues. Comparative software testing is one method of many that NREL uses to identify potential software issues.

Polly, B.; Horowitz, S.; Booten, B.; Kruis, N.; Christensen, C.

2012-08-01T23:59:59.000Z

449

Integration of Real-Time Data Into Building Automation Systems  

SciTech Connect

The project goal was to investigate the possibility of using predictive real-time information from the Internet as an input to building management system algorithms. The objectives were to identify the types of information most valuable to commercial and residential building owners, managers, and system designers. To comprehensively investigate and document currently available electronic real-time information suitable for use in building management systems. Verify the reliability of the information and recommend accreditation methods for data and providers. Assess methodologies to automatically retrieve and utilize the information. Characterize equipment required to implement automated integration. Demonstrate the feasibility and benefits of using the information in building management systems. Identify evolutionary control strategies.

Mark J. Stunder; Perry Sebastian; Brenda A. Chube; Michael D. Koontz

2003-04-16T23:59:59.000Z

450

Experimental study of full-size automated venetian blind windows  

SciTech Connect

This study presents an experimental study on full-size automated venetian blind window systems consisting of horizontal pivoted louvers installed and hermetically sealed between two glass panes. The experimental study was carried out using a test cell of 2.43 m high, 1.48 m wide, and 1.92 m deep. Various parameters were measured instantaneously and recorded using a data acquisition system: interior and exterior air temperatures; various surface temperatures; and total and direct solar radiations. A linearized numerical model was used to verify the experimental results.

Rheault, S.; Bilgen, E. (Ecole Polytechnique, Montreal, Quebec (Canada))

1990-01-01T23:59:59.000Z

451

Automated selection of LEDs by luminance and chromaticity coordinate  

E-Print Network (OSTI)

The increased use of LEDs for lighting purposes has led to the development of numerous applications requiring a pre-selection of LEDs by their luminance and / or their chromaticity coordinate. This paper demonstrates how a manual pre-selection process can be realized using a relatively simple configuration. Since a manual selection service can only be commercially viable as long as only small quantities of LEDs need to be sorted, an automated solution suggests itself. This paper introduces such a solution, which has been developed by Harzoptics in close cooperation with Rundfunk Gernrode. The paper also discusses current challenges in measurement technology as well as market trends.

Fischer, Ulrich H P; Reinboth, Christian

2010-01-01T23:59:59.000Z

452

Method and apparatus for automated, modular, biomass power generation  

DOE Patents (OSTI)

Method and apparatus for generating a low tar, renewable fuel gas from biomass and using it in other energy conversion devices, many of which were designed for use with gaseous and liquid fossil fuels. An automated, downdraft gasifier incorporates extensive air injection into the char bed to maintain the conditions that promote the destruction of residual tars. The resulting fuel gas and entrained char and ash are cooled in a special heat exchanger, and then continuously cleaned in a filter prior to usage in standalone as well as networked power systems.

Diebold, James P. (Lakewood, CO); Lilley, Arthur (Finleyville, PA); Browne, Kingsbury III (Golden, CO); Walt, Robb Ray (Aurora, CO); Duncan, Dustin (Littleton, CO); Walker, Michael (Longmont, CO); Steele, John (Aurora, CO); Fields, Michael (Arvada, CO); Smith, Trevor (Lakewood, CO)

2011-03-22T23:59:59.000Z

453

Automated process for solvent separation of organic/inorganic substance  

DOE Patents (OSTI)

There is described an automated process for the solvent separation of organic/inorganic substances that operates continuously and unattended and eliminates potential errors resulting from subjectivity and the aging of the sample during analysis. In the process, metered amounts of one or more solvents are passed sequentially through a filter containing the sample under the direction of a microprocessor control apparatus. The mixture in the filter is agitated by ultrasonic cavitation for a timed period and the filtrate is collected. The filtrate of each solvent extraction is collected individually and the residue on the filter element is collected to complete the extraction process. 4 figs.

Schweighardt, F.K.

1986-07-29T23:59:59.000Z

454

Substation automation feasibility study. Final report. Export trade information  

SciTech Connect

This study, conducted by Macro Corporation, was funded by the U.S. Trade and Development Agency, on behalf of the Polish Power Grid Company. The report shows the results of a feasibility study for the implementation of substation automation on the company`s high-voltage transmission network. The report is aimed at providing a technical-economic assessment of modernizing the monitoring, protection, and control systems in the major transmission substations. The report is divided into the following sections: (1) Introduction; (2) Existing Situation And Assessment Of Operational Needs; (3) Functional Requirements; (4) Implementation Options and Costs; (5) Guidelines for Staged Implementation; (6) Conclusions and Recommendations.

1995-07-01T23:59:59.000Z

455

Automated Load Balancing of Medium-Voltage Distribution Circuits  

Science Conference Proceedings (OSTI)

The objective of this project is to investigate the possibility of using an automated system to maintain optimal load balance in distribution circuits. The practice used by many utilities is to use a line crew and engineering personnel to measure load balance at key points in each circuit and manually move single-phase lateral taps to different phases to obtain the desired load balance among the phases. This practice has many shortcomings: The load balance is achieved only for a single point in ...

2013-03-21T23:59:59.000Z

456

Automated membrane test cell apparatus and method for so using  

SciTech Connect

Disclosed is an automated electrolytic membrane test cell apparatus adaptable for the purpose of accurately measuring the electrolytic properties of membranes used in chlor-alkali cells under operating conditions similar to those used in such cells. The apparatus comprises a test cell, said test cell being adapted to hold a permselective membrane sealingly supported therein so as to create separate anode and cathode compartments. An important feature of this invention is the use of reference voltage measurement means in each of said compartments to measure the voltage drop and power consumption within the membrane.

Yeager, H. L.; Malinsky, J. D.

1985-10-08T23:59:59.000Z

457

Automated process for solvent separation of organic/inorganic substance  

DOE Patents (OSTI)

There is described an automated process for the solvent separation of organic/inorganic substances that operates continuously and unattended and eliminates potential errors resulting from subjectivity and the aging of the sample during analysis. In the process, metered amounts of one or more solvents are passed sequentially through a filter containing the sample under the direction of a microprocessor control apparatus. The mixture in the filter is agitated by ultrasonic cavitation for a timed period and the filtrate is collected. The filtrate of each solvent extraction is collected individually and the residue on the filter element is collected to complete the extraction process.

Schweighardt, Frank K. (Upper Macungie, PA)

1986-01-01T23:59:59.000Z

458

Method and apparatus for automated, modular, biomass power generation  

DOE Patents (OSTI)

Method and apparatus for generating a low tar, renewable fuel gas from biomass and using it in other energy conversion devices, many of which were designed for use with gaseous and liquid fossil fuels. An automated, downdraft gasifier incorporates extensive air injection into the char bed to maintain the conditions that promote the destruction of residual tars. The resulting fuel gas and entrained char and ash are cooled in a special heat exchanger, and then continuously cleaned in a filter prior to usage in standalone as well as networked power systems.

Diebold, James P; Lilley, Arthur; Browne, III, Kingsbury; Walt, Robb Ray; Duncan, Dustin; Walker, Michael; Steele, John; Fields, Michael; Smith, Trevor

2013-11-05T23:59:59.000Z

459

Automated Vulnerability Detection for Compiled Smart Grid Software  

Science Conference Proceedings (OSTI)

While testing performed with proper experimental controls can provide scientifically quantifiable evidence that software does not contain unintentional vulnerabilities (bugs), it is insufficient to show that intentional vulnerabilities exist, and impractical to certify devices for the expected long lifetimes of use. For both of these needs, rigorous analysis of the software itself is essential. Automated software behavior computation applies rigorous static software analysis methods based on function extraction (FX) to compiled software to detect vulnerabilities, intentional or unintentional, and to verify critical functionality. This analysis is based on the compiled firmware, takes into account machine precision, and does not rely on heuristics or approximations early in the analysis.

Prowell, Stacy J [ORNL; Pleszkoch, Mark G [ORNL; Sayre, Kirk D [ORNL; Linger, Richard C [ORNL

2012-01-01T23:59:59.000Z

460

Process development for automated solar cell and module production. Task 4. Automated array assembly. Quarterly report No. 1  

DOE Green Energy (OSTI)

Work has been divided into five phases. The first phase is to modify existing hardware and controlling computer software to: (1) improve cell-to-cell placement accuracy, (2) improve the solder joint while reducing the amount of solder and flux smear on the cell's surface, and (3) reduce the system cycle time to 10 seconds. The second phase involves expanding the existing system's capabilities to be able to reject broken cells and make post-solder electrical tests. Phase 3 involves developing new hardware to allow for the automated encapsulation of solar modules. This involves three discrete pieces of hardware: (1) a vacuum platen end effector for the robot which allows it to pick up the 1' x 4' array of 35 inter-connected cells. With this, it can also pick up the cover glass and completed module, (2) a lamination preparation station which cuts the various encapsulation components from roll storage and positions them for encapsulation, and (3) an automated encapsulation chamber which interfaces with the above two and applies the heat and vacuum to cure the encapsulants. Phase 4 involves the final assembly of the encapsulated array into a framed, edge-sealed module completed for installation. For this we are using MBA's Glass Reinforced Concrete (GRC) in panels such as those developed by MBA for JPL under contract No. 955281. The GRC panel plays the multiple role of edge frame, substrate and mounting structure. An automated method of applying the edge seal will also be developed. The final phase (5) is the fabrication of six 1' x 4' electrically active solar modules using the above developed equipment. Progress is reported. (WHK)

Hagerty, J. J.

1980-10-15T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Process development for automated solar cell and module production. Task 4. Automated array assembly. Quarterly report No. 4  

DOE Green Energy (OSTI)

Construction of the components of an automated solar cell layup and interconnect system is now complete. This system incorporates a Unimate 2000 B industrial robot with an end effector consisting of a vacuum pick up and induction heating coil. The robot interfaces with a smart cell preparation station which correctly orients the cell, applies solder paste and forms and positions the correct lengths of interconnect lead. The system is controlled and monitored by a TRS-80 micro computer. The entire system is presently undergoing integration prior to formal testing. A survey of elastomer manufacturers has shown transfer molded EPDM to be a strong candidate for the edge sealing material.

Hagerty, J.J.

1979-10-15T23:59:59.000Z

462

Automated piecewise power-law modeling of biological systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Machina, Machina, A., et al., Automated piecewise power-law modeling of biological systems. J. Biotechnol. (2010), doi:10.1016/j.jbiotec.2009.12.016 ARTICLE IN PRESS G Model BIOTEC-5384; No. of Pages 12 Journal of Biotechnology xxx (2010) xxx-xxx Contents lists available at ScienceDirect Journal of Biotechnology j o u r n a l h o m e p a g e : w w w . e l s e v i e r . c o m / l o c a t e / j b i o t e c Automated piecewise power-law modeling of biological systems Anna Machina a,b,1,2 , Arkady Ponosov b,2 , Eberhard O. Voit a,∗ a Integrative BioSystems Institute and Wallace H. Coulter Department of Biomedical Engineering, Georgia Institute of Technology, 313 Ferst Drive, Suite 4103, Atlanta, GA 30332-0535, United States b Centre for Integrative Genetics (CIGENE), CIGENE, Arboretveien 6, 1432 Ås, Norway a r t i c l e i n f o Article history: Received 20 August 2009 Received in revised form 16 December 2009 Accepted

463

Automated Part Tracking and Metrology Applied to a Manufacturing Process  

E-Print Network (OSTI)

This paper presents a case study in the design of an automated part tracking and metrology systems for an industrial manufacturing system. A major productivity challenge of this facility is managing each batch of parts as it is formed, treated, and processed. Currently this is handled with paper forms that are transferred manually with each batch, resulting in scheduling problems, lost parts, and a general lack of ability to track orders through the production process. Problems in quality control also lead to significant waste. Required part measurements are taken and recorded manually, and are not considered reliable by plant management. The prototype design is an automated part tracking and quality control system to enhance productivity. The system uses RFID technology to identify parts and associate them with a particular order, giving management real-time information on the location of any product batch in the plant. In addition, part measurement quality control is enhanced with digitized calipers and scales, thus increases reliability of part measurement accuracy through human error reduction.

Morelli, F.; Halbert, T.; Hignight, M.; Kell, Z.; Lacy, J.; Rasmussen, B. P.

2013-01-01T23:59:59.000Z

464

Intelligent Building Automation: A Demand Response Management Perspective  

E-Print Network (OSTI)

In recent years intelligent Building Automation Systems, based on best practice open technology, have succeeded in helping facilities reduce their infrastructure, installation and operating costs. The idea was - 'the less the human intervention and the more automated the system then the more efficient the building'. With that in mind a question may arise as to whether this philosophy has been successful in educating the consumer on the importance of energy efficiency or has it actually alienated him? Would it be more effective if the consumer were to be part of the efficiency process? What about if the energy savings could be passed on to the consumer directly depending on how efficient he was? Demand response is a mechanism by which consumers change the energy consumption in response to energy price fluctuations, demand charges, or a direct request to reduce demand when the power grid reaches critical levels. However, in order for a demand response regime to be effective the building will need to have a number of 'pre-requisites' in place.

Qazi, T.

2010-01-01T23:59:59.000Z

465

Open Automated Demand Response for Small Commerical Buildings  

Science Conference Proceedings (OSTI)

This report characterizes small commercial buildings by market segments, systems and end-uses; develops a framework for identifying demand response (DR) enabling technologies and communication means; and reports on the design and development of a low-cost OpenADR enabling technology that delivers demand reductions as a percentage of the total predicted building peak electric demand. The results show that small offices, restaurants and retail buildings are the major contributors making up over one third of the small commercial peak demand. The majority of the small commercial buildings in California are located in southern inland areas and the central valley. Single-zone packaged units with manual and programmable thermostat controls make up the majority of heating ventilation and air conditioning (HVAC) systems for small commercial buildings with less than 200 kW peak electric demand. Fluorescent tubes with magnetic ballast and manual controls dominate this customer group's lighting systems. There are various ways, each with its pros and cons for a particular application, to communicate with these systems and three methods to enable automated DR in small commercial buildings using the Open Automated Demand Response (or OpenADR) communications infrastructure. Development of DR strategies must consider building characteristics, such as weather sensitivity and load variability, as well as system design (i.e. under-sizing, under-lighting, over-sizing, etc). Finally, field tests show that requesting demand reductions as a percentage of the total building predicted peak electric demand is feasible using the OpenADR infrastructure.

Dudley, June Han; Piette, Mary Ann; Koch, Ed; Hennage, Dan

2009-05-01T23:59:59.000Z

466

Linking Continuous Energy Management and Open Automated Demand Response  

Science Conference Proceedings (OSTI)

Advances in communications and control technology, the strengthening of the Internet, and the growing appreciation of the urgency to reduce demand side energy use are motivating the development of improvements in both energy efficiency and demand response (DR) systems. This paper provides a framework linking continuous energy management and continuous communications for automated demand response (Auto-DR) in various times scales. We provide a set of concepts for monitoring and controls linked to standards and procedures such as Open Automation Demand Response Communication Standards (Open Auto-DR or OpenADR). Basic building energy science and control issues in this approach begin with key building components, systems, end-uses and whole building energy performance metrics. The paper presents a framework about when energy is used, levels of services by energy using systems, granularity of control, and speed of telemetry. DR, when defined as a discrete event, requires a different set of building service levels than daily operations. We provide examples of lessons from DR case studies and links to energy efficiency.

Piette, Mary Ann; Kiliccote, Sila; Ghatikar, Girish

2008-10-03T23:59:59.000Z

467

Geothermal Well Operations and Automation in a Competitive Market  

DOE Green Energy (OSTI)

America's increasing dependence on foreign energy sources, and the national environmental initiatives, based on the increasing awareness of the need for protection of the environment, have led to the development of the Department of Energy's (DOE) domestic US alternative energy programs. One of these programs is the current US Gulf Coast Geopressured-Geothermal Program, conducted at three sites in Louisiana and Texas. Excellent results have been obtained in reaching the objectives for this production operation and energy conversion project, which are: (1) to determine the size of geopressured-geothermal reservoirs and the drive mechanisms by long-term, high volume, flow testing; (2) prove long-term injectability of large volumes of spent brine; (3) develop modified scale inhibitor treatment procedures; (4) develop methods for reduction of erosion/corrosion; (5) develop technology for automated operation of geopressured-geothermal production system; and (6) develop technology to produce power economically from the geopressured-geothermal resources. The long-term flow test at the Gladys McCall site has shown the producing reservoir is many times it original, projected size. Flow tests are being conducted at the Pleasant Bayou site in Texas. Another reservoir, at the Hulin site in Louisiana, remains for initiation of testing, at a time to be determined. Gas sales and electrical power generation from the geopressured-geothermal resources have proven that these are reliable alternative power sources. Continuing work is being done for field automation to improve the economics of these operations.

Eaton, B.A.; Featherston, C.R.; Meahl, T.E.; Randolph, P.L.

1992-03-24T23:59:59.000Z

468

Automated Monitoring System for Waste Disposal Sites and Groundwater  

Science Conference Proceedings (OSTI)

A proposal submitted to the U.S. Department of Energy (DOE), Office of Science and Technology, Accelerated Site Technology Deployment (ASTD) program to deploy an automated monitoring system for waste disposal sites and groundwater, herein referred to as the ''Automated Monitoring System,'' was funded in fiscal year (FY) 2002. This two-year project included three parts: (1) deployment of cellular telephone modems on existing dataloggers, (2) development of a data management system, and (3) development of Internet accessibility. The proposed concept was initially (in FY 2002) to deploy cellular telephone modems on existing dataloggers and partially develop the data management system at the Nevada Test Site (NTS). This initial effort included both Bechtel Nevada (BN) and the Desert Research Institute (DRI). The following year (FY 2003), cellular modems were to be similarly deployed at Sandia National Laboratories (SNL) and Los Alamos National Laboratory (LANL), and the early data management system developed at the NTS was to be brought to those locations for site-specific development and use. Also in FY 2003, additional site-specific development of the complete system was to be conducted at the NTS. To complete the project, certain data, depending on site-specific conditions or restrictions involving distribution of data, were to made available through the Internet via the DRI/Western Region Climate Center (WRCC) WEABASE platform. If the complete project had been implemented, the system schematic would have looked like the figure on the following page.

S. E. Rawlinson

2003-03-01T23:59:59.000Z

469

Security Automation Considered Harmful? W. Keith Edwards Erika Shehan Poole Jennifer Stoll  

E-Print Network (OSTI)

Security Automation Considered Harmful? W. Keith Edwards Erika Shehan Poole Jennifer Stoll School link in information security. Because of this perception, a growing body of research and commercial activity is focused on automated approaches to security. With these approaches, security decisions

Edwards, Keith

470

Automated Monitoring and Control Using New Data Integration Paradigm Mladen Kezunovi , Tanja Djoki Tatjana Kosti  

E-Print Network (OSTI)

-2003, Substation Committee of the IEEE Power Engineering Society [3] C.R.Ozansoy, A.Zayegh, A.Kalam, "Communications for Substation Automation and Integration", In Australasian Universities Power Engineering Substation Automation LiPing LU1,2 , GangYan LI1 , YeQiong SONG2 1 ­ School of Mechanical and Electronical

Kezunovic, Mladen

471

Powerline Communication System for Monitoring and Supervision of Feeder Equipments for MV Substation Automation  

E-Print Network (OSTI)

-2003, Substation Committee of the IEEE Power Engineering Society [3] C.R.Ozansoy, A.Zayegh, A.Kalam, "Communications for Substation Automation and Integration", In Australasian Universities Power Engineering Substation Automation LiPing LU1,2 , GangYan LI1 , YeQiong SONG2 1 ­ School of Mechanical and Electronical

Paris-Sud XI, Université de

472

Requirements Specification for and Evaluation of an Automated Substation Monitoring System  

E-Print Network (OSTI)

- substation design engineers, protective relay engineers, dispatchers in the control centers etc. AnotherRequirements Specification for and Evaluation of an Automated Substation Monitoring System Mladen for the Automated Analysis Substation System (AASS) implemented at Texas A&M University, aimed at monitoring

473

FUNCTIONAL ANNOTATION OF OIL PALM GENES USING AN AUTOMATED BIOINFORMATICS APPROACH FUNCTIONAL ANNOTATION OF OIL PALM  

E-Print Network (OSTI)

FUNCTIONAL ANNOTATION OF OIL PALM GENES USING AN AUTOMATED BIOINFORMATICS APPROACH 35 FUNCTIONAL ANNOTATION OF OIL PALM GENES USING AN AUTOMATED BIOINFORMATICS APPROACH LAURA B WILLIS*; PHILIP A LESSARDBank, and duplicate entries were eliminated by pairwise BLAST searches, resulting in a collection of unique oil palm

Sinskey, Anthony J.

474

Supporting structured credentials and sensitive policies through interoperable strategies for automated trust negotiation  

Science Conference Proceedings (OSTI)

Business and military partners, companies and their customers, and other closely cooperating parties may have a compelling need to conduct sensitive interactions on line, such as accessing each other's local services and other local resources. Automated ... Keywords: Automated trust negotiation, access control, digital credentials, interoperable strategies

Ting Yu; Marianne Winslett; Kent E. Seamons

2003-02-01T23:59:59.000Z

475

Assessment of impact of degree of automation on human roles: the experts' analysis using gaming  

Science Conference Proceedings (OSTI)

This paper describes the results of the two assessments performed to evaluate the impact of increasing levels of automation (LoA) on Human Factors aspects and the impact on their responsibilities and interactions. This activity has been developed within ... Keywords: ATM, assessment, automation, gaming, human factors

R. Casar, A. Arranz, B. Escribano, A. Grosskreutz, R. Garcia, R. Suikat, M. Jipp, G. D. R. Zon, M. Joosse

2013-05-01T23:59:59.000Z

476

Improvements in dependability and usability for a substation automation system with redundancy  

Science Conference Proceedings (OSTI)

Substation Automation Systems (SAS) are widely used for the purpose of control, protection, monitoring, communication etc. in substations to improve the reliability of the power supply. SASs adopting IT based solutions such as Ethernet LAN have recently ... Keywords: IEC 61850, SAS, availability, dependability, redundant system, reliability, substation automation system, system architecture

Hachidai Ito; Keiichi Kaneda; Koichi Hamamatsu; Tatsuji Tanaka; Koichi Nara

2008-10-01T23:59:59.000Z

477

Automated solar panel assembly line. LSA task: production processes and equipment. Quarterly report No. 1  

DOE Green Energy (OSTI)

The objective of this program is to design, fabricate and demonstrate an automated solar cell module production line with the ultimate goal of reducing module assembly costs. During this reporting period the automated module design was completed. The design of the solar cell assembly prototype (SCAP) was about 75% completed and the solar panel lamination prototype (SPLP) was built and tested.

Somberg, H.

1979-04-08T23:59:59.000Z

478

Smooth path and speed planning for an automated public transport vehicle  

Science Conference Proceedings (OSTI)

This paper presents a path and speed planner for automated public transport vehicles in unstructured environments. Since efficiency and comfort are two of the key issues in promoting this kind of transportation system, they are dealt with explicitly ... Keywords: Automated vehicles, Path planning, Speed planning

Jorge Villagra; Vicente Milans; Joshu Prez; Jorge Godoy

2012-02-01T23:59:59.000Z

479

The 5th IJCAR automated theorem proving system competition - CASC-J5  

Science Conference Proceedings (OSTI)

The CADE ATP System Competition (CASC) is an annual evaluation of fully automatic, classical logic Automated Theorem Proving (ATP) systems. CASC-J5 was the fifteenth competition in the CASC series. Thirty-nine ATP systems and system variants competed ... Keywords: Automated theorem proving, competition

Geoff Sutcliffe

2011-01-01T23:59:59.000Z

480

The 4th IJCAR Automated Theorem Proving System Competition - CASC-J4  

Science Conference Proceedings (OSTI)

The CADE ATP System Competition (CASC) is an annual evaluation of fully automatic, first order Automated Theorem Proving (ATP) systems. CASC-J4 was the thirteenth competition in the CASC series. Twenty-six ATP systems and system variants competed in ... Keywords: Competition, automated theorem proving

Geoff Sutcliffe

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "u-047 siemens automation" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

The state of the art in automating usability evaluation of user interfaces  

Science Conference Proceedings (OSTI)

Usability evaluation is an increasingly important part of the user interface design process. However, usability evaluation can be expensive in terms of time and human resources, and automation is therefore a promising way to augment existing approaches. ... Keywords: Graphical user interfaces, taxonomy, usability evaluation automation, web interfaces

Melody Y. Ivory; Marti A Hearst

2001-12-01T23:59:59.000Z

482

An Automated Test Framework for Hard Real-Time Communication Systems  

E-Print Network (OSTI)

An Automated Test Framework for Hard Real-Time Communication Systems MITHUN HANUMANAHALLI NAGAIAH ii #12;An Automated Test Framework for Hard Real-Time Communication Systems Master thesis project are subjected to hard real-time communication require- ments. The purpose of this thesis is in introducing tools

Jantsch, Axel

483

Principal component analysis based on wavelet characteristics applied to automated surface defect inspection  

Science Conference Proceedings (OSTI)

Automated visual inspection, a crucial manufacturing step, has been replacing the more time-consuming and less accurate human inspection. This research explores automated visual inspection of surface defects in a light-emitting diode (LED) chip. Commonly ... Keywords: hotelling statistic, machine vision system, principal component analysis, surface defect inspection, wavelet characteristics

Hong-Dar Lin; Chung-Yu Chung; Wan-Ting Lin

2008-04-01T23:59:59.000Z

484

Wind Measurement and Archival under the Automated Surface Observing System (ASOS): User Concerns and Opportunity for Improvement  

Science Conference Proceedings (OSTI)

The National Weather Service, as a part of its modernization effort, is implementing the Automated Surface Observing System (ASOS). Much discussion has occurred about various aspects of ASOS versus the current system of manual and automated ...

Mark D. Powell

1993-04-01T23:59:59.000Z

485

Small and Medium-Sized Building Automation and Control System Needs Scoping  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Small and Medium-Sized Building Automation Small and Medium-Sized Building Automation and Control System Needs Scoping Study Small and Medium-Sized Building Automation and Control System Needs Scoping Study The U.S. Department of Energy (DOE) is currently conducting a scoping research study of small- and medium-sized building automation and control system needs. Project Description This project seeks to develop a scoping study to identify the building automation system needs-such as end-uses and systems to be controlled-and control capabilities for small- and medium-sized buildings. Researchers also plan to develop a case study to show that building controls for small- and medium-sized buildings can be cost-effective. The monitoring needs to ensure proper and persistent operations will also be identified.

486

Development of an automated fuzing station for the future armored resupply vehicle  

Science Conference Proceedings (OSTI)

The US Army is developing the Advanced Field Artillery System (SGSD), a next generation armored howitzer. The Future Armored Resupply Vehicle (FARV) will be its companion ammunition resupply vehicle. The FARV with automate the supply of ammunition and fuel to the AFAS which will increase capabilities over the current system. One of the functions being considered for automation is ammunition processing. Oak Ridge National Laboratory is developing equipment to demonstrate automated ammunition processing. One of the key operations to be automated is fuzing. The projectiles are initially unfuzed, and a fuze must be inserted and threaded into the projectile as part of the processing. A constraint on the design solution is that the ammunition cannot be modified to simplify automation. The problem was analyzed to determine the alignment requirements. Using the results of the analysis, ORNL designed, built, and tested a test stand to verify the selected design solution.

Chesser, J.B.; Jansen, J.F.; Lloyd, P.D.; Varma, V.K.

1995-03-01T23:59:59.000Z

487

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation?  

NLE Websites -- All DOE Office Websites (Extended Search)

Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Dynamic or Tiered Rates? Utility or Customer-Controlled Event Automation? Speaker(s): Karen Herter Date: September 27, 2013 - 12:00pm - 1:00pm Location: 90-3122 Seminar Host/Point of Contact: Janie Page SMUD's 2011-2012 Residential Summer Solutions Study investigated the effects of real-time energy data and TOU-CPP rates in the presence of utility or customer controlled thermostat automation. Of the four rate and automation options offered, the TOU-CPP rate + customer-controlled automation provided the greatest savings, with 4% energy savings, daily weekday peak savings of more than 30%, and an average event peak load shed of nearly 60%. Effects of real-time information on these impacts were modest (1-7%), but in many cases statistically significant. On average,

488

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.  

SciTech Connect

The present invention relates to automated methods of introducing multiple nucleic acid sequences into one or more target cells.

Church, George M. (Brookline, MA); Wang, Harris H. (Cambridge, MA); Isaacs, Farren J. (Brookline, MA)

2012-04-10T23:59:59.000Z

489

Designing an intelligent decision support system for human-centered utility management automation part 1: structures, problem formulation, solution methodology  

Science Conference Proceedings (OSTI)

This paper presents a Decision Support System (DSS) to aid the electric utility management automation system. A brief history of DSS application in power systems is presented. The importance and role of DSS and decision making in utility management automation ... Keywords: computational intelligence, decision making, decision support, human-centered systems, neural networks, power distribution system, state estimation, systems design, utility management automation

Alireza Fereidunian; Caro Lucas; Hamid Lesani; Mansooreh Zangiabadi

2005-03-01T23:59:59.000Z

490

Automated Protocols Used by Labs | Scientific and Technical Information  

Office of Scientific and Technical Information (OSTI)

Notices Notices Automated Protocols Used by Labs Print page Print page Email page Email page DOE laboratories have two additional options for submitting data electronically to OSTI. They are: Batch Upload (Site-to-OSTI), and Harvesting (OSTI-to-Site). The XML DTD supporting Batch Upload specifies the same metadata that is used by the web-based AN 241.1. The main difference between web notice input and Harvesting upload is that the latter allows uploading of multiple records as a batch file. The web 241.1 is for single-record input only. Harvesting consists of three main phases: 1) Metadata mapping and technical development, 2) Testing, and 3) Production. The production phase is ongoing based on monitoring for quality control. Required Metadata Elements Author(s)

491

Automated Solar Feature Detection for Space Weather Applications  

E-Print Network (OSTI)

The solar surface and atmosphere are highly dynamic plasma environments, which evolve over a wide range of temporal and spatial scales. Large-scale eruptions, such as coronal mass ejections, can be accelerated to millions of kilometres per hour in a matter of minutes, making their automated detection and characterisation challenging. Additionally, there are numerous faint solar features, such as coronal holes and coronal dimmings, which are important for space weather monitoring and forecasting, but their low intensity and sometimes transient nature makes them problematic to detect using traditional image processing techniques. These difficulties are compounded by advances in ground- and space- based instrumentation, which have increased the volume of data that solar physicists are confronted with on a minute-by-minute basis; NASA's Solar Dynamics Observatory for example is returning many thousands of images per hour (~1.5 TB/day). This chapter reviews recent advances in the application of images processing t...

Prez-Surez, David; Bloomfield, D Shaun; McAteer, R T James; Krista, Larisza D; Byrne, Jason P; Gallagher, Peter T

2011-01-01T23:59:59.000Z

492

Northwest Open Automated Demand Response Technology Demonstration Project  

SciTech Connect

Lawrence Berkeley National Laboratory (LBNL) and the Demand Response Research Center (DRRC) performed a technology demonstration and evaluation for Bonneville Power Administration (BPA) in Seattle City Light's (SCL) service territory. This report summarizes the process and results of deploying open automated demand response (OpenADR) in Seattle area with winter morning peaking commercial buildings. The field tests were designed to evaluate the feasibility of deploying fully automated demand response (DR) in four to six sites in the winter and the savings from various building systems. The project started in November of 2008 and lasted 6 months. The methodology for the study included site recruitment, control strategy development, automation system deployment and enhancements, and evaluation of sites participation in DR test events. LBNL subcontracted McKinstry and Akuacom for this project. McKinstry assisted with recruitment, site survey collection, strategy development and overall participant and control vendor management. Akuacom established a new server and enhanced its operations to allow for scheduling winter morning day-of and day-ahead events. Each site signed a Memorandum of Agreement with SCL. SCL offered each site $3,000 for agreeing to participate in the study and an additional $1,000 for each event they participated. Each facility and their control vendor worked with LBNL and McKinstry to select and implement control strategies for DR and developed their automation based on the existing Internet connectivity and building control system. Once the DR strategies were programmed, McKinstry commissioned them before actual test events. McKinstry worked with LBNL to identify control points that can be archived at each facility. For each site LBNL collected meter data and trend logs from the energy management and control system. The communication system allowed the sites to receive day-ahead as well as day-of DR test event signals. Measurement of DR was conducted using three different baseline models for estimation peak load reductions. One was three-in-ten baseline, which is based on the site electricity consumption from 7 am to 10 am for the three days with the highest consumption of the previous ten business days. The second model, the LBNL outside air temperature (OAT) regression baseline model, is based on OAT data and site electricity consumption from the previous ten days, adjusted using weather regressions from the fifteen-minute electric load data during each DR test event for each site. A third baseline that simply averages the available load data was used for sites less with less than 10 days of historical meter data. The evaluation also included surveying sites regarding any problems or issues that arose during the DR test events. Question covered occupant comfort, control issues and other potential problems.

Kiliccote, Sila; Dudley, Junqiao Han; Piette, Mary Ann

2009-08-01T23:59:59.000Z

493

Automated Collaborative Filtering Applications for Online Recruitment Services  

E-Print Network (OSTI)

. Online recruitment services suffer from shortcomings due to traditional search techniques. Most users fail to construct queries that provide an adequate and accurate description of their (job) requirements, leading to imprecise search results. We investigate one potential solution that combines implicit profiling methods and automated collaborative filtering (ACF) techniques to build personalised query-less job recommendations. Two ACF strategies are implemented and evaluated in the JobFinder domain. 1 Introduction Online recruitment services have emerged as one of the most successful and popular information services on the Internet, providing job seekers with a comprehensive database of jobs and a dedicated search engine. For example, the award-winning Irish site, JobFinder (www.jobfinder.ie). However, like many similar Internet applications JobFinder suffers from shortcomings, due to its reliance on traditional database technology and the client-pull information access mode...

Rachael Rafter; Keith Bradley; Barry Smyth

2000-01-01T23:59:59.000Z

494

Analysis of Automated Model against DDoS Attacks  

E-Print Network (OSTI)

Today Distributed Denial of Service (DDoS) attacks are causing major threat to perform online business over the Internet. Recently several schemes have been proposed on how to prevent some of these attacks, but they suffer from a range of problems, some of them being impractical and others not being effective against these attacks. Our previous work proposed an automated model that deals with the overall DDoS problem. With a new packet marking technique and agent design, our approach has many advanced features to minimize the DDoS attacks within a single ISP domain. In this paper we discuss different types of attacks that are possible on our model and propose techniques to counteract the identified attacks. We will also discuss security protocols for communication between different entities in our model.

Udaya Kiran Tupakula

2003-01-01T23:59:59.000Z

495

Analysis of automated highway system risks and uncertainties. Volume 5  

SciTech Connect

This volume describes a risk analysis performed to help identify important Automated Highway System (AHS) deployment uncertainties and quantify their effect on costs and benefits for a range of AHS deployment scenarios. The analysis identified a suite of key factors affecting vehicle and roadway costs, capacities and market penetrations for alternative AHS deployment scenarios. A systematic protocol was utilized for obtaining expert judgments of key factor uncertainties in the form of subjective probability percentile assessments. Based on these assessments, probability distributions on vehicle and roadway costs, capacity and market penetration were developed for the different scenarios. The cost/benefit risk methodology and analysis provide insights by showing how uncertainties in key factors translate into uncertainties in summary cost/benefit indices.

Sicherman, A.

1994-10-01T23:59:59.000Z

496

Automated Sealing of Home Enclosures with Aerosol Particles  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

October 14, 2011 October 14, 2011 Automated Sealing of Home Enclosures with Aerosol Particles Welcome to the Webinar! We will start at 11:00 AM Eastern Time Be sure that you are also dialed into the telephone conference call: Dial-in number: 888-989-7679; Pass code: 3599368 Download the presentation at: www.buildingamerica.gov/meetings.html Building Technologies Program eere.energy.gov Building America: Introduction October 14, 2011 Chuck Booten Chuck.booten@nrel.gov Building Technologies Program Building Technologies Program eere.energy.gov * Reduce energy use in new and existing residential buildings * Promote building science and systems engineering / integration approach * "Do no harm": Ensure safety, health and durability are maintained or improved

497

Role of Standard Demand Response Signals for Advanced Automated Aggregation  

Science Conference Proceedings (OSTI)

Emerging standards such as OpenADR enable Demand Response (DR) Resources to interact directly with Utilities and Independent System Operators to allow their facility automation equipment to respond to a variety of DR signals ranging from day ahead to real time ancillary services. In addition, there are Aggregators in todays markets who are capable of bringing together collections of aggregated DR assets and selling them to the grid as a single resource. However, in most cases these aggregated resources are not automated and when they are, they typically use proprietary technologies. There is a need for a framework for dealing with aggregated resources that supports the following requirements: Allows demand-side resources to participate in multiple DR markets ranging from wholesale ancillary services to retail tariffs without being completely committed to a single entity like an Aggregator; Allow aggregated groups of demand-side resources to be formed in an ad hoc fashion to address specific grid-side issues and support the optimization of the collective response of an aggregated group along a number of different dimensions. This is important in order to taylor the aggregated performance envelope to the needs to of the grid; Allow aggregated groups to be formed in a hierarchical fashion so that each group can participate in variety of markets from wholesale ancillary services to distribution level retail tariffs. This paper explores the issues of aggregated groups of DR resources as described above especially within the context of emerging smart grid standards and the role they will play in both the management and interaction of various grid-side entities with those resources.

Lawrence Berkeley National Laboratory; Kiliccote, Sila

2011-11-18T23:59:59.000Z

498

Transient and harmonic voltages associated with automated capacitor switching on distribution systems  

SciTech Connect

One of the functions proposed for distribution automation systems is automated capacitor switching to control power factor and voltage profile on feeder circuits. This is one of the functions being implemented as part of the Athens Automation and Control Experiment on the Athens Utilities Board (AUB) in Athens, Tennessee. A concern with automated capacitor switching is the increase in harmonic and transient voltages due to different capacitor configurations on the distribution system. A study was performed to evaluate the impact of the automated capacitor switching on the AUB distribution system. The study has identified problem areas, methods for determining the problem areas, and possible solutions. The substation capacitor banks were found to be the dominant factor in both the transient and harmonic responses of the distribution system. The harmonic response of the system is dominated by the parallel inductance/capacitance of the circuit comprised of the substation capacitor and equivalent source reactance at the substation. The transient analyses indicated that when the substation capacitor is energized, magnified transient voltages can occur at switched-in feeder capacitors. An evaluation of the effect of automated capacitor switching is necessary to properly design the automated capacitor switching schemes and the required arrester protection for any harmonic and/or transient overvoltage contingency.

Rizy, D.T.; Gunther, E.W.; Mc Granaghan, M.F.

1987-08-01T23:59:59.000Z

499

Transient and harmonic voltages associated with automated capacitor switching on distribution systems  

SciTech Connect

One of the functions proposed for distribution system automation is automated capacitor switching to control power factor and voltage profile on feeder circuits. This is one of the functions being implemented as part of the Athens Automation and Control Experiment on the Athens Utilities Board (AUB) in Athens, Tennessee. A concern with automated capacitor switching is the increase in harmonic and transient voltages due to different capacitor configurations on the distribution system. A study was performed to evaluate the impact of the automated capacitor switching on the AUB distribution system. The study has identified problem areas, methods for determining the problem areas and possible solutions. The substation capacitor banks were found to be the dominant factor in both the transient and harmonic responses of the distribution system. The harmonic response of the system is dominated by the parallel inductance/capacitance of the circuit comprised of the substation capacitor and equivent source reactance at the substation. The transient analyses found that when the substation capacitor is energized, magnified transient voltages can occur at switched in feeder capacitors. An evaluation of the effect of automated capacitor switching is necessary to properly design tha automated capacitor switching schemes and the required arrester protection for any harmonic and/or transient overvoltage contingency.

Rizy, D.T.; Gunther, E.W.; McGranaghan, M.F.

1986-01-01T23:59:59.000Z

500

STATEMENT OF CONSIDERATIONS REQUEST BY SIEMENS WESTINGHOUSE POWER...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

of the global power plant market. All other forms of generating electrical power, such as steam turbine technology, nuclear power, hydroelectric and wind facilities, represent...