Powered by Deep Web Technologies
Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ELECTRICAL ENERGY SYSTEMS ELECTRICAL ENERGY SYSTEMS  

E-Print Network [OSTI]

countries to install solar energy technologies into local schools and hospitals. In its Energy PolicyMEng ELECTRICAL ENERGY SYSTEMS #12;MEng ELECTRICAL ENERGY SYSTEMS Electrical energy is vital aspects of modern life. One of the biggest challenges facing society is the need for reliable energy

Strathclyde, University of

2

Hybrid Energy System Modeling in Modelica  

SciTech Connect (OSTI)

In this paper, a Hybrid Energy System (HES) configuration is modeled in Modelica. Hybrid Energy Systems (HES) have as their defining characteristic the use of one or more energy inputs, combined with the potential for multiple energy outputs. Compared to traditional energy systems, HES provide additional operational flexibility so that high variability in both energy production and consumption levels can be absorbed more effectively. This is particularly important when including renewable energy sources, whose output levels are inherently variable, determined by nature. The specific HES configuration modeled in this paper include two energy inputs: a nuclear plant, and a series of wind turbines. In addition, the system produces two energy outputs: electricity and synthetic fuel. The models are verified through simulations of the individual components, and the system as a whole. The simulations are performed for a range of component sizes, operating conditions, and control schemes.

William R. Binder; Christiaan J. J. Paredis; Humberto E. Garcia

2014-03-01T23:59:59.000Z

3

Configurations The  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

in Testing Configurations The PSEL's infrastructure addresses critical issues of PV reliability and power availability. The lab offers four different load configuration...

4

Energy Systems Laboratory Groundbreaking  

ScienceCinema (OSTI)

INL recently broke ground for a research facility that will house research programs for bioenergy, advanced battery systems, and new hybrid energy systems that integrate renewable, fossil and nuclear energy sources. Here's video from the groundbreaking ceremony for INL's new Energy Systems Laboratory. You can learn more about CAES research at http://www.facebook.com/idahonationallaboratory.

Hill, David; Otter, C.L.; Simpson, Mike; Rogers, J.W.;

2013-05-28T23:59:59.000Z

5

Modular Integrated Energy Systems  

E-Print Network [OSTI]

Honeywell #12;Modular Integrated Energy Systems Task 5 Prototype Development Reference Design DocumentationModular Integrated Energy Systems Prepared for: Oak Ridge National Laboratory P.O. Box 2008 Building 3147 Oak Ridge, TN 37831 April 27, 2006 Prepared by: Honeywell Laboratories 3660 Technology Drive

Oak Ridge National Laboratory

6

Wind Energy Systems Exemption  

Broader source: Energy.gov [DOE]

Tennessee House Bill 809, enacted into law in Public Chapter 377, Acts of 2003 and codified under Title 67, Chapter 5, states that wind energy systems operated by public utilities, businesses or...

7

Solar Energy System Exemption  

Broader source: Energy.gov [DOE]

In Louisiana, any equipment attached to an owner-occupied residential building or swimming pool as part of a solar energy system is considered personal property that is exempt from ad valorem...

8

Integrated Energy System Dispatch Optimization  

E-Print Network [OSTI]

Energy System Dispatch Optimization Ryan Firestone, MichaelEnergy System Dispatch Optimization Ryan Firestone - Studentthe real-time dispatch optimization problem for a generic

Firestone, Ryan; Stadler, Michael; Marnay, Chris

2006-01-01T23:59:59.000Z

9

Module Configuration  

DOE Patents [OSTI]

A stand alone battery module including: (a) a mechanical configuration; (b) a thermal management configuration; (c) an electrical connection configuration; and (d) an electronics configuration. Such a module is fully interchangeable in a battery pack assembly, mechanically, from the thermal management point of view, and electrically. With the same hardware, the module can accommodate different cell sizes and, therefore, can easily have different capacities. The module structure is designed to accommodate the electronics monitoring, protection, and printed wiring assembly boards (PWAs), as well as to allow airflow through the module. A plurality of modules may easily be connected together to form a battery pack. The parts of the module are designed to facilitate their manufacture and assembly.

Oweis, Salah (Ellicott City, MD); D'Ussel, Louis (Bordeaux, FR); Chagnon, Guy (Cockeysville, MD); Zuhowski, Michael (Annapolis, MD); Sack, Tim (Cockeysville, MD); Laucournet, Gaullume (Paris, FR); Jackson, Edward J. (Taneytown, MD)

2002-06-04T23:59:59.000Z

10

NETL: Energy Systems  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recovery challengeMultiscaleLogos NERSCJeffreyKey Actions forEnergy Systems Program

11

Risk-sensitive optimal switching and applications to district energy systems  

E-Print Network [OSTI]

. Cost optimisation of energy system assets has typically been carried out under the assumption of riskRisk-sensitive optimal switching and applications to district energy systems Jhonny Gonzalez School consideration. In a flexible energy system with cogeneration and heat storage, however, it is possible

Glendinning, Paul

12

Hydrogen energy systems studies  

SciTech Connect (OSTI)

For several years, researchers at Princeton University`s Center for Energy and Environmental Studies have carried out technical and economic assessments of hydrogen energy systems. Initially, we focussed on the long term potential of renewable hydrogen. More recently we have explored how a transition to renewable hydrogen might begin. The goal of our current work is to identify promising strategies leading from near term hydrogen markets and technologies toward eventual large scale use of renewable hydrogen as an energy carrier. Our approach has been to assess the entire hydrogen energy system from production through end-use considering technical performance, economics, infrastructure and environmental issues. This work is part of the systems analysis activity of the DOE Hydrogen Program. In this paper we first summarize the results of three tasks which were completed during the past year under NREL Contract No. XR-11265-2: in Task 1, we carried out assessments of near term options for supplying hydrogen transportation fuel from natural gas; in Task 2, we assessed the feasibility of using the existing natural gas system with hydrogen and hydrogen blends; and in Task 3, we carried out a study of PEM fuel cells for residential cogeneration applications, a market which might have less stringent cost requirements than transportation. We then give preliminary results for two other tasks which are ongoing under DOE Contract No. DE-FG04-94AL85803: In Task 1 we are assessing the technical options for low cost small scale production of hydrogen from natural gas, considering (a) steam reforming, (b) partial oxidation and (c) autothermal reforming, and in Task 2 we are assessing potential markets for hydrogen in Southern California.

Ogden, J.M.; Steinbugler, M.; Dennis, E. [Princeton Univ., NJ (United States)] [and others

1995-09-01T23:59:59.000Z

13

Optimizing performance of energy systems  

SciTech Connect (OSTI)

This book discusses optimizing performance of energy systems. Topics covered include a test station, heat flow integrator, microcomputer control of MIMIC operation, and microcomputer control of simulation operation.

Stricker, S.

1985-01-01T23:59:59.000Z

14

Advancing Energy Systems through Integration  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

and reliability Community Scale Heating and Cooling 4 ever-greenenergy.com Ever-Green Energy Integrated Energy System flexible & renewable fuel sources reliable and...

15

National Renewable Energy Laboratory's Energy Systems Integration...  

Broader source: Energy.gov (indexed) [DOE]

National Renewable Energy Laboratory's Energy Systems Integration Facility Overview National Renewable Energy Laboratory's Energy Systems Integration Facility Overview This...

16

Energy Systems Integration Facility Overview  

ScienceCinema (OSTI)

The U.S. Department of Energy's Energy Systems Integration Facility (ESIF) is located at the National Renewable Energy Laboratory is the right tool, at the right time... a first-of-its-kind facility that addresses the challenges of large-scale integration of clean energy technologies into the energy systems that power the nation.

Arvizu, Dan; Chistensen, Dana; Hannegan, Bryan; Garret, Bobi; Kroposki, Ben; Symko-Davies, Martha; Post, David; Hammond, Steve; Kutscher, Chuck; Wipke, Keith

2014-06-10T23:59:59.000Z

17

Project Sponsors: Department of Energy Clean Energy Systems  

E-Print Network [OSTI]

Project Sponsors: Department of Energy Clean Energy Systems An Original Equipment Manufacturer (confidential) ADVANCED POWER & ENERGY PROGRAM www.apep.uci.edu RESULTS CO2 capture approaching 100 and in the gasifier in the case of a fuel such as coal). O2 purity typically greater than 95% is required to meet

Mease, Kenneth D.

18

Renewable Energy Systems | Clean Energy | ORNL  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Renewable Energy Systems SHARE Renewable Energy Systems Develop methods and models, conduct analyses and produce tools that address the potential and sustainability of biomass...

19

Advancing Energy Systems through Integration | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Advancing Energy Systems through Integration Advancing Energy Systems through Integration This presentation was given by Ever-Green Energy's Ken Smith as part of the November 20,...

20

Generation IV Nuclear Energy Systems ...  

E-Print Network [OSTI]

Generation IV Nuclear Energy Systems ... The U.S. Department of Energy's Office of Nuclear Energy enhance safety and security, and develop nuclear power as an energy source for industrial applications Information ... U.S. Department of Energy www.energy.gov DOE Office of Nuclear Energy www.nuclear

Kemner, Ken

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

West Virginia University 1 Energy Systems Engineering  

E-Print Network [OSTI]

personnel with advanced training in specialized areas of energy systems and energy supply-chain management in the area of conversion Distribution/storage 3 Examples include: #12;2 Energy Systems Engineering EE 533West Virginia University 1 Energy Systems Engineering The Master of Science in Energy Systems

Mohaghegh, Shahab

22

ESIF 2014 (Energy Systems Integration Facility) (Brochure)  

SciTech Connect (OSTI)

This report covers research highlights and achievements for the Energy Systems Integration Facility in 2014.

Not Available

2015-01-01T23:59:59.000Z

23

Transforming our Nation's Energy System, Energy Systems Integration Facility (ESIF)  

SciTech Connect (OSTI)

The Energy Systems Integration Facility (ESIF) on the campus of the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) will soon be the nation's first facility that can conduct integrated megawatt-scale testing of the components and strategies needed in order to safely move clean energy technologies onto the electrical grid 'in-flight' at the speed and scale required to meet national goals.

Not Available

2011-08-01T23:59:59.000Z

24

NREL: Energy Systems Integration - Energy Systems Integration Newsletter  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions and Achievements ofLiz Torres PhotoMaterials ScienceEnergy Systems

25

Integrated Building Energy Systems Design Considering Storage Technologies  

E-Print Network [OSTI]

L ABORATORY Integrated Building Energy Systems Design7301 Integrated building energy systems design considering

Stadler, Michael

2009-01-01T23:59:59.000Z

26

RENEWABLES RESEARCH Boiler Burner Energy System Technology  

E-Print Network [OSTI]

RENEWABLES RESEARCH Boiler Burner Energy System Technology (BBEST) for Firetube Boilers PIER Renewables Research September 2010 The Issue Researchers at Altex Technologies Corporation in Sunnyvale, industrial combined heat and power (CHP) boiler burner energy system technology ("BBEST"). Their research

27

Currituck County- Wind Energy Systems Ordinance  

Broader source: Energy.gov [DOE]

In January 2008, Currituck County adopted an ordinance to regulate the use of wind-energy systems. The ordinance directs any individual or organization wishing to install a wind-energy system to...

28

Integrating Renewable Energy Systems in Buildings (Presentation)  

SciTech Connect (OSTI)

This presentation on integrating renewable energy systems into building was presented at the August, 2011 ASHRAE Region IX CRC meetings.

Hayter, S. J.

2011-08-01T23:59:59.000Z

29

Energy Systems Group ESCO Qualification Sheet | Department of...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Energy Systems Group ESCO Qualification Sheet Energy Systems Group ESCO Qualification Sheet Document outlines the energy service company (ESCO) qualifications for Energy Systems...

30

Distributed Energy Systems Integration Group (Fact Sheet)  

SciTech Connect (OSTI)

Factsheet developed to describe the activites of the Distributed Energy Systems Integration Group within NREL's Electricity, Resources, and Buildings Systems Integration center.

Not Available

2009-10-01T23:59:59.000Z

31

Carteret County- Wind Energy System Ordinance  

Broader source: Energy.gov [DOE]

Carteret County passed an ordinance to specify the permitting process and establish siting requirements for wind energy systems. There are different rules and a different permitting process...

32

Renewable Energy Systems Property Tax Exemption  

Broader source: Energy.gov [DOE]

Renewable energy systems which serve a residential, commercial or industrial building or irrigation system are exempt from property taxes. Qualified equipment includes solar, wind, geothermal,...

33

Maricopa County- Renewable Energy Systems Zoning Ordinance  

Broader source: Energy.gov [DOE]

The Maricopa County Zoning Ordinance contains provisions for siting renewable energy systems. The ordinance defines renewable energy as "energy derived primarily from sources other than fossil...

34

Renewable Energy Systems Tax Credit (Personal)  

Broader source: Energy.gov [DOE]

Utah's individual income tax credit for renewable energy systems includes provisions for both residential and commercial applications. The Utah Office of Energy Development administers the tax...

35

Energy Systems Engineering 1 Clean Coal Technologies  

E-Print Network [OSTI]

Energy Systems Engineering 1 Clean Coal Technologies Presentation at BARC 4th December 2007 #12/kWh) 0.14 0.03 0.6 #12;Energy Systems Engineering 9 Status of Advanced Coal Technologies Types of advanced coal technologies Supercritical Pulverised Combustion Circulating Fluidised Bed Combustion (CFBC

Banerjee, Rangan

36

CONFIGURATION MANAGEMENT (CM)  

Broader source: Energy.gov (indexed) [DOE]

Safety systems and mission critical systems are defined and a comprehensive Configuration Management systemprocedure to maintain control over the design and modifications of these...

37

NUCLEAR ENERGY SYSTEM COST MODELING  

SciTech Connect (OSTI)

The U.S. Department of Energy’s Fuel Cycle Technologies (FCT) Program is preparing to perform an evaluation of the full range of possible Nuclear Energy Systems (NES) in 2013. These include all practical combinations of fuels and transmuters (reactors and sub-critical systems) in single and multi-tier combinations of burners and breeders with no, partial, and full recycle. As part of this evaluation, Levelized Cost of Electricity at Equilibrium (LCAE) ranges for each representative system will be calculated. To facilitate the cost analyses, the 2009 Advanced Fuel Cycle Cost Basis Report is being amended to provide up-to-date cost data for each step in the fuel cycle, and a new analysis tool, NE-COST, has been developed. This paper explains the innovative “Island” approach used by NE-COST to streamline and simplify the economic analysis effort and provides examples of LCAE costs generated. The Island approach treats each transmuter (or target burner) and the associated fuel cycle facilities as a separate analysis module, allowing reuse of modules that appear frequently in the NES options list. For example, a number of options to be screened will include a once-through uranium oxide (UOX) fueled light water reactor (LWR). The UOX LWR may be standalone, or may be the first stage in a multi-stage system. Using the Island approach, the UOX LWR only needs to be modeled once and the module can then be reused on subsequent fuel cycles. NE-COST models the unit operations and life cycle costs associated with each step of the fuel cycle on each island. This includes three front-end options for supplying feedstock to fuel fabrication (mining/enrichment, reprocessing of used fuel from another island, and/or reprocessing of this island’s used fuel), along with the transmuter and back-end storage/disposal. Results of each island are combined based on the fractional energy generated by each islands in an equilibrium system. The cost analyses use the probability distributions of key parameters and employs Monte Carlo sampling to arrive at an island’s cost probability density function (PDF). When comparing two NES to determine delta cost, strongly correlated parameters can be cancelled out so that only the differences in the systems contribute to the relative cost PDFs. For example, one comparative analysis presented in the paper is a single stage LWR-UOX system versus a two-stage LWR-UOX to LWR-MOX system. In this case, the first stage of both systems is the same (but with different fractional energy generation), while the second stage of the UOX to MOX system uses the same type transmuter but the fuel type and feedstock sources are different. In this case, the cost difference between systems is driven by only the fuel cycle differences of the MOX stage.

Francesco Ganda; Brent Dixon

2012-09-01T23:59:59.000Z

38

Energy Systems and Population Health  

SciTech Connect (OSTI)

It is well-documented that energy and energy systems have a central role in social and economic development and human welfare at all scales, from household and community to regional and national (41). Among its various welfare effects, energy is closely linked with people s health. Some of the effects of energy on health and welfare are direct. With abundant energy, more food or more frequent meals can be prepared; food can be refrigerated, increasing the types of food items that are consumed and reducing food contamination; water pumps can provide more water and eliminate the need for water storage leading to contamination or increased exposure to disease vectors such as mosquitoes or snails; water can be disinfected by boiling or using other technologies such as radiation. Other effects of energy on public health are mediated through more proximal determinants of health and disease. Abundant energy can lead to increased irrigation, agricultural productivity, and access to food and nutrition; access to energy can also increase small-scale income generation such as processing of agricultural commodities (e.g., producing refined oil from oil seeds, roasting coffee, drying and preserving fruits and meats) and production of crafts; ability to control lighting and heating allows education or economic activities to be shielded from daily or seasonal environmental constraints such as light, temperature, rainfall, or wind; time and other economic resources spent on collecting and/or transporting fuels can be used for other household needs if access to energy is facilitated; energy availability for transportation increases access to health and education facilities and allow increased economic activity by facilitating the transportation of goods and services to and from markets; energy for telecommunication technology (radio, television, telephone, or internet) provides increased access to information useful for health, education, or economic purposes; provision of energy to rural and urban health facilities allows increased delivery and coverage of 3 various health services and interventions such as tests and treatments, better storage of medicine and vaccines, disinfection of medical equipment by boiling or radiation, and more frequent and efficient health system encounters through mobile clinics or longer working hours; and so on. In fact, while the dominant view of development-energy-health linkages has been that improvements in energy and health are outcomes of the socioeconomic development process (e.g., the ''energy ladder'' framework discussed below), it has even been argued that access to higher quality energy sources and technologies can initiate a chain of demographic, health, and development outcomes by changing the household structure and socioeconomic relationships. For example, in addition to increased opportunities for food and income production, reduced infant mortality as a result of transition to cleaner fuels or increased coverage of vaccination with availability of refrigerators in rural clinics may initiate a process of ''demographic transition'' to low-mortality and low-fertility populations (14). Such a transition has historically been followed with further improvements in maternal and child health and increased female participation in the labor markets and other economic activities.

Ezzati, Majid; Bailis, Rob; Kammen, Daniel M.; Holloway, Tracey; Price, Lynn; Cifuentes, Luis A.; Barnes, Brendon; Chaurey, Akanksha; Dhanapala, Kiran N.

2004-04-12T23:59:59.000Z

39

Solar Energy Systems Tax Credit (Corporate) (Iowa)  

Broader source: Energy.gov [DOE]

Iowa offers a 15% corporate tax credit for solar energy systems. The credit is based on the federal tax credits for solar; a taxpayer may claim 50% of the value of the [http://dsireusa.org...

40

Central Energy Systems - Applications to Economic Development  

E-Print Network [OSTI]

the conceptual stage of design. The second program, Central Energy Systems Analysis Program (CESAP) analyzes energy efficiency for a group of buildings and determines if a new district heating and cooling (DHC) system would be a cost effective application...

Myers, M. S.; Diserens, S. E.

1985-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Energy Systems Acquisitions Advisory Board Procedures  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Notice streamlines the Energy Systems Acquisition Advisory Board (ESAAB) process to ensure informed, objective, and documented Strategic and Major System Critical Decision, Baseline Change Proposal, and site selection final decisions. Does not cancel other directives.

1997-10-28T23:59:59.000Z

42

Camden County- Wind Energy Systems Ordinance  

Broader source: Energy.gov [DOE]

In September 2007, Camden County adopted a wind ordinance to regulate the use of wind-energy systems in the county and to describe the conditions by which a permit for installing such a system may...

43

Pitt County- Wind Energy Systems Ordinance  

Broader source: Energy.gov [DOE]

The Pitt County Board of Commissioners adopted amendments to the county zoning ordinance in March 2010 which classify wind energy systems as an accessory use and establish siting and permitting...

44

Watauga County- Wind Energy System Ordinance  

Broader source: Energy.gov [DOE]

In 2006, Watauga County adopted a wind ordinance to regulate the use of wind-energy systems in the county and to describe the conditions by which a permit for installing such a system may be...

45

Property Tax Exclusion for Solar Energy Systems  

Broader source: Energy.gov [DOE]

'''''Note: The California State Board of Equalization (BOE) approved new [http://www.boe.ca.gov/proptaxes/pdf/lta12053.pdf guidelines] for the Active Solar Energy Systems New Construction Exclusion...

46

Special Assessment for Solar Energy Systems  

Broader source: Energy.gov [DOE]

Illinois offers a special assessment of solar energy systems for property-tax purposes. For property owners who register with a chief county assessment officer, solar energy equipment is valued at...

47

Property Tax Exemption for Renewable Energy Systems  

Broader source: Energy.gov [DOE]

In Iowa, the market value added to a property by a solar or wind energy system is exempt from the state's property tax for five full assessment years. Residential geothermal systems are exempt for...

48

INTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE  

E-Print Network [OSTI]

Integrated Design of Commercial Building Ceiling Systems Integrated Design of Residential Ducting & Air FlowINTEGRATED ENERGY SYSTEMS: PRODUCTIVITY & BUILDING SCIENCE Productivity and Interior Environments Integrated Design of Large Commercial HVAC Systems Integrated Design of Small Commercial HVAC Systems

49

Residential Alternative Energy System Tax Credit  

Broader source: Energy.gov [DOE]

Residential taxpayers who install an energy system using a recognized non-fossil form of energy on their home after December 31, 2001 are eligible for a tax credit equal to the amount of the cost...

50

Solar Energy Systems Tax Credit (Personal) (Iowa)  

Broader source: Energy.gov [DOE]

Iowa offers a 15% individual tax credit for solar energy systems. The credit is based on the federal tax credits for solar; individuals can claim 50% of the [http://dsireusa.org/incentives...

51

Energy Systems Integration Laboratory (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Systems Integration Laboratory at the Energy Systems Integration Facility. The Energy Systems Integration Laboratory at NREL's Energy Systems Integration Facility (ESIF) provides a flexible, renewable-ready platform for research, development, and testing of state-of-the-art hydrogen-based and other energy storage systems. The main focus of the laboratory is assessment of the technical readiness, performance characterization, and research to help industry move these systems towards optimal renewable-based production and efficient utilization of hydrogen. Research conducted in the Energy Systems Integration Laboratory will advance engineering knowledge and market deployment of hydrogen technologies to support a growing need for versatile distributed electricity generation, applications in microgrids, energy storage for renewables integration, and home and station-based hydrogen vehicle fueling. Research activities are targeted to improve the technical readiness of the following: (1) Low and high temperature electrolyzers, reformers and fuel cells; (2) Mechanical and electrochemical compression systems; (3) Hydrogen storage; (4) Hydrogen vehicle refueling; and (5) Internal combustion or turbine technology for electricity production. Examples of experiments include: (1) Close- and direct-coupling of renewable energy sources (PV and wind) to electrolyzers; (2) Performance and efficiency validation of electrolyzers, fuel cells, and compressors; (3) Reliability and durability tracking and prediction; (4) Equipment modeling and validation testing; (5) Internal combustion or turbine technology for electricity production; and (6) Safety and code compliance.

Not Available

2011-10-01T23:59:59.000Z

52

Integrated Energy Systems (IES) for Buildings: A Market Assessment...  

Broader source: Energy.gov (indexed) [DOE]

Energy Systems (IES) for Buildings: A Market Assessment, September 2002 Integrated Energy Systems (IES) combine on-site power or distributed generation technologies with thermally...

53

NREL: Systems Engineering - 2015 Wind Energy Systems Engineering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Research Systems Engineering Printable Version 2015 Wind Energy Systems Engineering Workshop The third NREL Wind Energy Systems Engineering Workshop took place on the 14th and 15th...

54

A Framework for the Optimization of Integrated Energy Systems...  

Open Energy Info (EERE)

Framework for the Optimization of Integrated Energy Systems(Jain and Alleyne 2012) Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15...

55

Energy Systems Integration: A Convergence of Ideas  

SciTech Connect (OSTI)

Energy systems integration (ESI) enables the effective analysis, design, and control of these interactions and interdependencies along technical, economic, regulatory, and social dimensions. By focusing on the optimization of energy from all systems, across all pathways, and at all scales, we can better understand and make use of the co-benefits that result to increase reliability and performance, reduce cost, and minimize environmental impacts. This white paper discusses systems integration and the research in new control architectures that are optimized at smaller scales but can be aggregated to optimize energy systems at any scale and would allow replicable energy solutions across boundaries of existing and new energy pathways.

Kroposki, B.; Garrett, B.; MacMillan, S.; Rice, B.; Komomua, C.; O'Malley, M.; Zimmerle, D.

2012-07-01T23:59:59.000Z

56

Adaptive, full-spectrum solar energy system  

DOE Patents [OSTI]

An adaptive full spectrum solar energy system having at least one hybrid solar concentrator, at least one hybrid luminaire, at least one hybrid photobioreactor, and a light distribution system operably connected to each hybrid solar concentrator, each hybrid luminaire, and each hybrid photobioreactor. A lighting control system operates each component.

Muhs, Jeffrey D.; Earl, Dennis D.

2003-08-05T23:59:59.000Z

57

Energy Systems Integration A Convergence of Ideas  

E-Print Network [OSTI]

Energy Systems Integration A Convergence of Ideas July 2012 Ben Kroposki, Bobi Garrett, Stuart Macmillan, Brent Rice, and Connie Komomua National Renewable Energy Laboratory Mark O'Malley University of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy

58

Mechanical Engineering Industrial Energy Systems Laboratory  

E-Print Network [OSTI]

of District Heating and Cooling with an Electro-Thermal Energy Storage System Master Thesis ANURAG KUMAR of the district energy systems is performed and modifications are proposed in a district heating network. Based thermodynamic cycle, ETES suffers from the irreversibilities and excess thermal energy is required to dispose

Candea, George

59

Estimating solar access of typical residential rooftops: A case study in San Jose, CA  

E-Print Network [OSTI]

solar-energy systems, including photovoltaic panels andsolar-energy systems, including photovoltaic panels and

Levinson, Ronnen M

2008-01-01T23:59:59.000Z

60

ITP Industrial Distributed Energy: Integrated Energy Systems...  

Broader source: Energy.gov (indexed) [DOE]

specifically for stationary power generation or compression applications in the oil and gas industries. Multiple stages are typical and differentiate these turbines, along with...

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

System for controlling a hybrid energy system  

DOE Patents [OSTI]

A method includes identifying a first operating sequence of a repeated operation of at least one non-traction load. The method also includes determining first and second parameters respectively indicative of a requested energy and output energy of the at least one non-traction load and comparing the determined first and second parameters at a plurality of time increments of the first operating sequence. The method also includes determining a third parameter of the hybrid energy system indicative of energy regenerated from the at least one non-traction load and monitoring the third parameter at the plurality of time increments of the first operating sequence. The method also includes determining at least one of an energy deficiency or an energy surplus associated with the non-traction load of the hybrid energy system and selectively adjusting energy stored within the storage device during at least a portion of a second operating sequence.

Hoff, Brian D.; Akasam, Sivaprasad

2013-01-29T23:59:59.000Z

62

Solar ADEPT: Efficient Solar Energy Systems  

SciTech Connect (OSTI)

Solar ADEPT Project: The 7 projects that make up ARPA-E's Solar ADEPT program, short for 'Solar Agile Delivery of Electrical Power Technology,' aim to improve the performance of photovoltaic (PV) solar energy systems, which convert the sun's rays into electricity. Solar ADEPT projects are integrating advanced electrical components into PV systems to make the process of converting solar energy to electricity more efficient.

None

2011-01-01T23:59:59.000Z

63

Orion Energy Systems | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoading map...(UtilityCounty, Michigan:OregonTransmissionHeader.pngOrion Energy Systems Jump to:

64

NREL: Innovation Impact - Energy Systems Integration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory | National NuclearoverAcquisitionEnergy Systems Integration Menu

65

Alstom Energy Systems | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of InspectorConcentrating SolarElectricEnergy InformationTuriAlexandriaAlstom Energy Systems Jump to:

66

Photon Energy Systems Ltd | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia, Virginia: Energy ResourcesLoadingPenobscot County, Maine: Energy Resources2003) |FacilityPhoenixPhoton Energy Systems Ltd

67

Dirac GPU Cluster Configuration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOfficeNERSCDiesel prices top $4Configuration Node and

68

Local Option- Property Tax Exemption for Renewable Energy Systems  

Broader source: Energy.gov [DOE]

Rhode Island allows cities and towns to exempt, by ordinance, renewable energy systems from property taxation. The term "renewable energy system" is not defined in the applicable statute (R.I. Gen....

69

NREL: Systems Engineering - 2010 Wind Energy Systems Engineering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

0 Wind Energy Systems Engineering Workshop The 1st NREL Wind Energy Systems Engineering Workshop took place on December 14, 2010, at the National Wind Technology Center (NWTC). The...

70

Preliminary Notice of Violation, Lockheed Martin Energy Systems...  

Office of Environmental Management (EM)

Preliminary Notice of Violation, Lockheed Martin Energy Systems - EA-2000-11 Preliminary Notice of Violation, Lockheed Martin Energy Systems - EA-2000-11 August 24, 2000 Issued to...

71

Power converter connection configuration  

DOE Patents [OSTI]

EMI shielding is provided for power electronics circuits and the like via a direct-mount reference plane support and shielding structure. The thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support forms a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C. (Wauwatosa, WI); Kehl, Dennis L. (Milwaukee, WI); Gettelfinger, Lee A. (Brown Deer, WI); Kaishian, Steven C. (Milwaukee, WI); Phillips, Mark G. (Brookfield, WI); Radosevich, Lawrence D. (Muskego, WI)

2008-11-11T23:59:59.000Z

72

Energy Systems Organization Charts | Argonne National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation ProposedUsing Zirconia NanoparticlesSmart Grocer Program Sign-upEnergy Systems Organization

73

American Energy Systems Inc | Open Energy Information  

Open Energy Info (EERE)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 NoPublic Utilities Address: 160 East 300Algoil JumpAltergy SystemsAmerican Energy Systems Inc Place: Minnesota Zip:

74

NREL: Sustainable NREL - Energy Systems Integration Facility  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the Contributions andData and Resources NREL resourceEnergy Systems Integration Facility

75

NREL Leads Energy Systems Integration, Continuum Magazine: Issue 4 (Book)  

SciTech Connect (OSTI)

Continuum Magazine showcases NREL's latest and most impactful clean energy innovations. This issue, 'NREL Leads Energy Systems Integration' explores the discipline of energy systems integration, in particular the role of the laboratory's new, one-of-a-kind Energy System Integration Facility. NREL scientists, engineers, and analysts deeply understand the fundamental science and technologies underpinning major energy producing and consuming systems, as well as the transmission infrastructure and communications and data networks required to integrate energy systems at all scales.

Not Available

2013-04-01T23:59:59.000Z

76

www.extension.ucdavis.edu/engineering Energy systems  

E-Print Network [OSTI]

and geothermal energy systems. Small Wind Energy Systems: Overview .8 CEU. Receive the hands-on training you need of geothermal energy systems with this user-friendly overview. Learn from experts from all parts of the geothermal energy community as they discuss what geotherm

Thomases, Becca

77

. ^ ^ L c O / ^ -Rise-R-497 Energy Systems Group  

E-Print Network [OSTI]

2 otSMooiaji é. ^ ^ L c O / ^ - Rise-R-497 t x Energy Systems Group Annual Progress Report 1 Januar Roskilde, Denmark March 1984 r #12;RIS�-R-497 ENERGY SYSTEMS GROUP Annual Progress Report 1 January - 31 of the Energy Systems Group at Risø National Laboratory during 1983. Th«r activities may be roughly classified

78

Biomass energy systems information user study  

SciTech Connect (OSTI)

The results of a series of telephone interviews with groups of users of information on biomass energy systems are described. These results, part of a larger study on many different solar technologies, identify types of information each group needed and the best ways to get information to each group. This report is 1 of 10 discussing study results. The overall study provides baseline data about information needs in the solar community. Results from 12 biomass groups of respondents are analyzed in this report: Federally Funded Researchers (2 groups), Nonfederally Funded Researchers (2 groups), Representatives of Manufacturers (2 groups), Representatives of State Forestry Offices, Private Foresters, Forest Products Engineers, Educators, Cooperative Extension Service County Agents, and System Managers. The data will be used as input to the determination of information products and services the Solar Energy Research Institute, the Solar Energy Information Data Bank Network, and the entire information outreach community should be preparing and disseminating.

Belew, W.W.; Wood, B.L.; Marle, T.L.; Reinhardt, C.L.

1981-02-01T23:59:59.000Z

79

Compact chemical energy system for seismic applications  

DOE Patents [OSTI]

A chemical energy system is formed for producing detonations in a confined environment. An explosive mixture is formed from nitromethane (NM) and diethylenetriamine (DETA). A slapper detonator is arranged adjacent to the explosive mixture to initiate detonation of the mixture. NM and DETA are not classified as explosives when handled separately and can be safely transported and handled by workers in the field. In one aspect of the present invention, the chemicals are mixed at a location where an explosion is to occur. For application in a confined environment, the chemicals are mixed in an inflatable container to minimize storage space until it is desired to initiate an explosion. To enable an inflatable container to be used, at least 2.5 wt % DETA is used in the explosive mixture. A barrier is utilized that is formed of a carbon composite material to provide the appropriate barrel geometry and energy transmission to the explosive mixture from the slapper detonator system.

Engelke, Raymond P. (Los Alamos, NM); Hedges, Robert O. (Los Alamos, NM); Kammerman, Alan B. (Los Alamos, NM); Albright, James N. (Los Alamos, NM)

1998-01-01T23:59:59.000Z

80

Nuclear Hybrid Energy Systems: Challenges and Opportunities  

SciTech Connect (OSTI)

With growing demand of energy and costs of the fossil fuels, coupled with the environmental concerns have resulted in an increased interest in alternative energy sources. Nuclear hybrid energy systems (NHES) are being considered which incorporates renewable energy sources such as solar and wind energy combined with nuclear reactor and energy storage to meet the peak hours demand imposed on the grid, along with providing process heat for other potential industrial applications. This concept could potentially satisfy various energy demands and improve reliability, robustness and resilience for the entire system as a whole, along with economic and net efficiency gains. This paper provides a brief understanding of potential NHES system and architecture along with the challenges

P. Sabharwall; S.B. Sitton; S.J. Yoon; C. Stoots

2014-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fusion-fission energy systems evaluation  

SciTech Connect (OSTI)

This report serves as the basis for comparing the fusion-fission (hybrid) energy system concept with other advanced technology fissile fuel breeding concepts evaluated in the Nonproliferation Alternative Systems Assessment Program (NASAP). As such, much of the information and data provided herein is in a form that meets the NASAP data requirements. Since the hybrid concept has not been studied as extensively as many of the other fission concepts being examined in NASAP, the provided data and information are sparse relative to these more developed concepts. Nevertheless, this report is intended to provide a perspective on hybrids and to summarize the findings of the rather limited analyses made to date on this concept.

Teofilo, V.L.; Aase, D.T.; Bickford, W.E.

1980-01-01T23:59:59.000Z

82

An Analysis of the Effects of Photovoltaic Energy Systems on Residential Selling Prices in California.  

E-Print Network [OSTI]

Effects of Residential Photovoltaic Energy Systems on Homeof homes with existing photovoltaic (PV) energy systems havegrid-connected solar photovoltaic (PV) energy systems were

Cappers, Peter

2012-01-01T23:59:59.000Z

83

Do Photovoltaic Energy Systems Effect Residential Selling Prices? Results from a California Statewide Investigation.  

E-Print Network [OSTI]

DO PHOTOVOLTAIC ENERGY SYSTEMS AFFECT RESIDENTIAL SELLINGopportunity employer. DO PHOTOVOLTAIC ENERGY SYSTEMS AFFECTin the U.S. have sold with photovoltaic (PV) energy systems

Hoen, Ben

2012-01-01T23:59:59.000Z

84

Chapter 2: Sustainable and Unsustainable Developments in the U.S. Energy System  

E-Print Network [OSTI]

transitioning to a more sustainable energy system. From 2000toward a less sustainable energy system. This chapterStates toward a more sustainable energy system. Sustainable

Levine, Mark D.

2008-01-01T23:59:59.000Z

85

Policy Strategies and Paths to promote Sustainable Energy Systems - The dynamic Invert Simulation Tool  

E-Print Network [OSTI]

Schemes for sustainable energy systems”. InternationalPaths to promote Sustainable Energy Systems - The dynamicmoney - for promoting sustainable energy systems - be spent

Stadler, Michael; Kranzl, Lukas; Huber, Claus; Haas, Reinhard; Tsioliaridou, Elena

2006-01-01T23:59:59.000Z

86

A Methodology to Assess the Reliability of Hydrogen-based Transportation Energy Systems  

E-Print Network [OSTI]

2. Define reliability in hydrogen energy systems 3.metrics to value reliability in hydrogen energy systems 4.Specify hydrogen energy systems to evaluate 5. Develop

McCarthy, Ryan

2004-01-01T23:59:59.000Z

87

Distributed Sensor Coordination for Advanced Energy Systems  

SciTech Connect (OSTI)

The ability to collect key system level information is critical to the safe, efficient and reli- able operation of advanced energy systems. With recent advances in sensor development, it is now possible to push some level of decision making directly to computationally sophisticated sensors, rather than wait for data to arrive to a massive centralized location before a decision is made. This type of approach relies on networked sensors (called “agents” from here on) to actively collect and process data, and provide key control deci- sions to significantly improve both the quality/relevance of the collected data and the as- sociating decision making. The technological bottlenecks for such sensor networks stem from a lack of mathematics and algorithms to manage the systems, rather than difficulties associated with building and deploying them. Indeed, traditional sensor coordination strategies do not provide adequate solutions for this problem. Passive data collection methods (e.g., large sensor webs) can scale to large systems, but are generally not suited to highly dynamic environments, such as ad- vanced energy systems, where crucial decisions may need to be reached quickly and lo- cally. Approaches based on local decisions on the other hand cannot guarantee that each agent performing its task (maximize an agent objective) will lead to good network wide solution (maximize a network objective) without invoking cumbersome coordination rou- tines. There is currently a lack of algorithms that will enable self-organization and blend the efficiency of local decision making with the system level guarantees of global decision making, particularly when the systems operate in dynamic and stochastic environments. In this work we addressed this critical gap and provided a comprehensive solution to the problem of sensor coordination to ensure the safe, reliable, and robust operation of advanced energy systems. The differentiating aspect of the proposed work is in shift- ing the focus towards “what to observe” rather than “how to observe” in large sensor networks, allowing the agents to actively determine both the structure of the network and the relevance of the information they are seeking to collect. In addition to providing an implicit coordination mechanism, this approach allows the system to be reconfigured in response to changing needs (e.g., sudden external events requiring new responses) or changing sensor network characteristics (e.g., sudden changes to plant condition). Outcome Summary: All milestones associated with this project have been completed. In particular, private sensor objective functions were developed which are aligned with the global objective function, sensor effectiveness has been improved by using “sensor teams,” system efficiency has been improved by 30% using difference evaluation func- tions, we have demonstrated system reconfigurability for 20% changes in system con- ditions, we have demonstrated extreme scalability of our proposed algorithm, we have demonstrated that sensor networks can overcome disruptions of up to 20% in network conditions, and have demonstrated system reconfigurability to 20% changes in system conditions in hardware-based simulations. This final report summarizes how each of these milestones was achieved, and gives insight into future research possibilities past the work which has been completed. The following publications support these milestones [6, 8, 9, 10, 16, 18, 19].

Tumer, Kagan

2013-07-31T23:59:59.000Z

88

Configuration Management Plan | Department of Energy  

Broader source: Energy.gov (indexed) [DOE]

& Publications SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist NMMSS Software Quality Assurance Plan Software Configuration...

89

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration...  

Broader source: Energy.gov (indexed) [DOE]

SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management Checklist SOFTWARE QUALITY & SYSTEMS ENGINEERING PROGRAM: Software Configuration Management...

90

Solar energy system performance evaluation. Seasonal report for Fern Lansing, Lansing, Michigan  

SciTech Connect (OSTI)

The Solar Energy System was designed by Fern Engineering Company, Bourne, Massachusetts to provide space heating and domestic hot water preheating for a 1300 square foot single-family residence located in Lansing, Michigan. The Solar Energy System consists of a 278 square foot flat-plate air collector subsystem, a three 120-gallon tank storage subsystem, a 40 gallon domestic hot water tank subsystem, a liquid/air heat exchanger, an energy transport module, pumps, controls and heat transfer medium lines. Natural gas provides the auxiliary energy for the space heating (100,000 Btu/h) and hot water (70,000 Btu/h) subsystems. The system is shown schematically and has five modes of operation. Typical system operation, system operating sequence, performance assessment, system performance, subsystems performance (collector array, storage, hot water, space heating), operating energy, energy savings, and maintenance are discussed. A brief summary of all pertinent parameters is presented.

Not Available

1980-06-01T23:59:59.000Z

91

Hydrogen energy systems studies. Final technical report  

SciTech Connect (OSTI)

The results of previous studies suggest that the use of hydrogen from natural gas might be an important first step toward a hydrogen economy based on renewables. Because of infrastructure considerations (the difficulty and cost of storing, transmitting and distributing hydrogen), hydrogen produced from natural gas at the end-user`s site could be a key feature in the early development of hydrogen energy systems. In the first chapter of this report, the authors assess the technical and economic prospects for small scale technologies for producing hydrogen from natural gas (steam reformers, autothermal reformers and partial oxidation systems), addressing the following questions: (1) What are the performance, cost and emissions of small scale steam reformer technology now on the market? How does this compare to partial oxidation and autothermal systems? (2) How do the performance and cost of reformer technologies depend on scale? What critical technologies limit cost and performance of small scale hydrogen production systems? What are the prospects for potential cost reductions and performance improvements as these technologies advance? (3) How would reductions in the reformer capital cost impact the delivered cost of hydrogen transportation fuel? In the second chapter of this report the authors estimate the potential demand for hydrogen transportation fuel in Southern California.

Ogden, J.M.; Kreutz, T.; Kartha, S.; Iwan, L.

1996-08-13T23:59:59.000Z

92

A fundamental study on hybrid geothermal energy systems.  

E-Print Network [OSTI]

??Research Doctorate - Doctor of Philosophy (PhD) This thesis focuses on a fundamental study of hybrid geothermal energy systems, in which geothermal energy is hybridised… (more)

Zhou, Cheng

2014-01-01T23:59:59.000Z

93

Ground heat exchanger design for direct geothermal energy systems .  

E-Print Network [OSTI]

??Direct geothermal energy systems use the ground to heat and cool buildings. Ground-source heat pump (GSHP) systems are the most widespread form of direct geothermal… (more)

COLLS, STUART

2013-01-01T23:59:59.000Z

94

Quality Guidelines for Energy System Studies: Fuel Pricing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Benefits 20 Fuel Prices for Selected Feedstocks in NETL Studies Quality Guidelines for Energy System Studies November 2012 Forecasting the delivered price of any coal to any...

95

Martin Marietta Energy Systems, Inc., Groundwater Program Management Plan  

SciTech Connect (OSTI)

The purpose of the Martin Marietta Energy Systems, Inc., (Energy Systems) Groundwater Program Management Plan is to define the function, organizational structure (including associated matrix organizations), interfaces, roles and responsibilities, authority, and relationship to the Department of Energy for the Energy Systems Groundwater Program Office (GWPO). GWPO is charged with the responsibility of coordinating all components of the groundwater program for Energy Systems. This mandate includes activities at the three Oak Ridge facilities [Oak Ridge National Laboratory, the Oak Ridge Y-12 Plant, and the Oak Ridge K-25 Site], as well as the Paducah and Portsmouth Gaseous Diffusion Plants.

Early, T.O.

1994-05-01T23:59:59.000Z

96

Secretary Moniz Speaks on New Energy Systems Integration Facility...  

Broader source: Energy.gov (indexed) [DOE]

Systems Integration Facility (ESIF) at NREL Secretary Moniz Speaks on New Energy Systems Integration Facility (ESIF) at NREL Addthis Speakers Secretary Ernest Moniz Duration 20:09...

97

USDA Renewable Energy Systems and Energy Efficiency Improvement...  

Office of Environmental Management (EM)

Department of Agriculture's (USDA's) Rural Business Cooperative-Service Agency, under the Rural Energy for America Program, is accepting applications for Renewable Energy Systems...

98

Generation IV Advanced Nuclear Energy Systems By Jacques Bouchard...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Generation IV Advanced Nuclear Energy Systems By Jacques Bouchard, French Commissariat a l'Energie Atomique, France and Ralph Bennett, Idaho National Laboratory. Generation IV...

99

Energy Systems High Pressure Test Laboratory (Fact Sheet), NREL...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

National laboratories Contact Us If you are interested in working with NREL's Energy Systems High Pressure Test Laboratory, please contact: ESIF Manager Carolyn Elam...

100

Energy Systems Fabrication Laboratory (Fact Sheet), NREL (National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

National laboratories Contact Us If you are interested in working with NREL's Energy Systems Fabrication Laboratory, please contact: ESIF Manager Carolyn Elam...

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Energy Systems Sensor Laboratory (Fact Sheet), NREL (National...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

from fundamental research to applications engineering. Partners at the ESIF's Energy Systems Sensor Laboratory may include: * Hydrogen sensor manufacturers * Codes and standards...

102

Advanced Organic Vapor Cycles for Improving Thermal Conversion Efficiency in Renewable Energy Systems  

E-Print Network [OSTI]

and M Dennis, "Solar thermal energy systems in Australia,"and M Dennis, "Solar thermal energy systems in Australia,"

Ho, Tony

2012-01-01T23:59:59.000Z

103

High fidelity nuclear energy system optimization towards an environmentally benign, sustainable, and secure energy source.  

SciTech Connect (OSTI)

The impact associated with energy generation and utilization is immeasurable due to the immense, widespread, and myriad effects it has on the world and its inhabitants. The polar extremes are demonstrated on the one hand, by the high quality of life enjoyed by individuals with access to abundant reliable energy sources, and on the other hand by the global-scale environmental degradation attributed to the affects of energy production and use. Thus, nations strive to increase their energy generation, but are faced with the challenge of doing so with a minimal impact on the environment and in a manner that is self-reliant. Consequently, a revival of interest in nuclear energy has followed, with much focus placed on technologies for transmuting nuclear spent fuel. The performed research investigates nuclear energy systems that optimize the destruction of nuclear waste. In the context of this effort, nuclear energy system is defined as a configuration of nuclear reactors and corresponding fuel cycle components. The proposed system has unique characteristics that set it apart from other systems. Most notably the dedicated High-Energy External Source Transmuter (HEST), which is envisioned as an advanced incinerator used in combination with thermal reactors. The system is configured for examining environmentally benign fuel cycle options by focusing on minimization or elimination of high level waste inventories. Detailed high-fidelity exact-geometry models were developed for representative reactor configurations. They were used in preliminary calculations with Monte Carlo N-Particle eXtented (MCNPX) and Standardized Computer Analysis for Licensing Evaluation (SCALE) code systems. The reactor models have been benchmarked against existing experimental data and design data. Simulink{reg_sign}, an extension of MATLAB{reg_sign}, is envisioned as the interface environment for constructing the nuclear energy system model by linking the individual reactor and fuel component sub-models for overall analysis of the system. It also provides control over key user input parameters and the ability to effectively consolidate vital output results for uncertainty/sensitivity analysis and optimization procedures. The preliminary analysis has shown promising advanced fuel cycle scenarios that include Pressure Water Reactors Pressurized Water Reactors (PWRs), Very High Temperature Reactors (VHTRs) and dedicated HEST waste incineration facilities. If deployed, these scenarios may substantially reduce nuclear waste inventories approaching environmentally benign nuclear energy system characteristics. Additionally, a spent fuel database of the isotopic compositions for multiple design and control parameters has been created for the VHTR-HEST input fuel streams. Computational approaches, analysis metrics, and benchmark strategies have been established for future detailed studies.

Tsvetkov, Pavel Valeryevich (Texas A& M University, College Station, TX); Rodriguez, Salvador B.; Ames, David E., II (Texas A& M University, College Station, TX); Rochau, Gary Eugene

2009-09-01T23:59:59.000Z

104

Neutron imaging for geothermal energy systems  

SciTech Connect (OSTI)

Geothermal systems extract heat energy from the interior of the earth using a working fluid, typically water. Three components are required for a commercially viable geothermal system: heat, fluid, and permeability. Current commercial electricity production using geothermal energy occurs where the three main components exist naturally. These are called hydrothermal systems. In the US, there is an estimated 30 GW of base load electrical power potential for hydrothermal sites. Next generation geothermal systems, named Enhanced Geothermal Systems (EGS), have an estimated potential of 4500 GW. EGSs lack in-situ fluid, permeability or both. As such, the heat exchange system must be developed or engineered within the rock. The envisioned method for producing permeability in the EGS reservoir is hydraulic fracturing, which is rarely practiced in the geothermal industry, and not well understood for the rocks typically present in geothermal reservoirs. High costs associated with trial and error learning in the field have led to an effort to characterize fluid flow and fracturing mechanisms in the laboratory to better understand how to design and manage EGS reservoirs. Neutron radiography has been investigated for potential use in this characterization. An environmental chamber has been developed that is suitable for reproduction of EGS pressures and temperatures and has been tested for both flow and precipitations studies with success for air/liquid interface imaging and 3D reconstruction of precipitation within the core.

Bingham, Philip R [ORNL; Anovitz, Lawrence {Larry} M [ORNL; Polsky, Yarom [ORNL

2013-01-01T23:59:59.000Z

105

ADAPTIVE FULL-SPECTRUM SOLOR ENERGY SYSTEMS  

SciTech Connect (OSTI)

This RD&D project is a three year team effort to develop a hybrid solar lighting (HSL) system that transports solar light from a paraboloidal dish concentrator to a luminaire via a large core polymer fiber optic. The luminaire can be a device to distribute sunlight into a space for the production of algae or it can be a device that is a combination of solar lighting and electric lighting. A benchmark prototype system has been developed to evaluate the HSL system. Sunlight is collected using a one-meter paraboloidal concentrator dish with two-axis tracking. A secondary mirror consisting of eight planar-segmented mirrors directs the visible part of the spectrum to eight fibers (receiver) and subsequently to eight luminaires. This results in about 8,200 lumens incident at each fiber tip. Each fiber can illuminate about 16.7 m{sup 2} (180 ft{sup 2}) of office space. The IR spectrum is directed to a thermophotovoltaic (TPV) array to produce electricity. During this reporting period, the project team made advancements in the design of the second generation (Alpha) system. For the Alpha system, the eight individual 12 mm fibers have been replaced with a centralized bundle of 3 mm fibers. The TRNSYS Full-Spectrum Solar Energy System model has been updated and new components have been added. The TPV array and nonimaging device have been tested and progress has been made in the fiber transmission models. A test plan was developed for both the high-lumen tests and the study to determine the non-energy benefits of daylighting. The photobioreactor team also made major advancements in the testing of model scale and bench top lab-scale systems.

Byard D. Wood

2004-04-01T23:59:59.000Z

106

Radiant-interchange configuration factors  

E-Print Network [OSTI]

RADIANT-INTERCHANGE CONFIGURATION FACTORS A Thesis By THOMAS E DW ARD RE D DIN Submitted to the Graduate College of the Texas A)M University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE January 1965 Major... wife, Dorene, whose patience and encouragement have been a constant source of inspiration. TABLE OF CONTENTS CHAPTER I . INTRODUCTION PAGE ~ 0 1 II. THE GEOMETRY OF THE BLACK BODY CONFIGURATION FACTOR. . . , . . . . . . . . . . . . . . . . 3 1...

Reddin, Thomas Edward

1965-01-01T23:59:59.000Z

107

Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy  

E-Print Network [OSTI]

i Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy by Robert Sean Pagliari ________________________ #12; ii We the undersigned committee hereby approve the attached thesis Hybrid Renewable Energy, College of Engineering #12; iii Abstract Hybrid Renewable Energy Systems for a Dynamically Positioned

Wood, Stephen L.

108

SURVEILLANCE OF PHOTOVOLTAIC SOLAR ENERGY SYSTEMS USING METEOSAT DERIVED IRRADIANCES  

E-Print Network [OSTI]

SURVEILLANCE OF PHOTOVOLTAIC SOLAR ENERGY SYSTEMS USING METEOSAT DERIVED IRRADIANCES Annette Hammer.Heinemann@uni-oldenburg.de 2Enecolo AG, Lindhof 235, CH-8617 M¨onchaltorf 3Fraunhofer Insitute for Solar Energy Systems Wiemken3, Hans Georg Beyer4, Vincent van Dijk5, Jethro Betcke5 1Dept. of Energy and Semiconductor Research

Heinemann, Detlev

109

COMBINING STATED AND REVEALED CHOICE RESEARCH TO INFORM ENERGY SYSTEM  

E-Print Network [OSTI]

Energy System Simulation Models: The Case of Hybrid Electric Vehicles Report Number: 409 ExaminingCOMBINING STATED AND REVEALED CHOICE RESEARCH TO INFORM ENERGY SYSTEM SIMULATION MODELS: THE CASE parameters for a hybrid energy-economy model (called CIMS) using empirically derived choice models based

110

Toward Standards for Dynamics in Electric Energy Systems  

E-Print Network [OSTI]

Toward Standards for Dynamics in Electric Energy Systems Future Grid Initiative White Paper Power Systems Engineering Research Center Empowering Minds to Engineer the Future Electric Energy System #12 Engineering Research Center The Power Systems Engineering Research Center (PSERC) is a multi-university Center

111

EVALUATION OF TROQUE VS CLOSURE BOLT PRELOAD FOR A TYPICAL CONTAINMENT VESSEL UNDER SERVICE CONDITIONS  

SciTech Connect (OSTI)

Radioactive material package containment vessels typically employ bolted closures of various configurations. Closure bolts must retain the lid of a package and must maintain required seal loads, while subjected to internal pressure, impact loads and vibration. The need for insuring that the specified preload is achieved in closure bolts for radioactive materials packagings has been a continual subject of concern for both designers and regulatory reviewers. The extensive literature on threaded fasteners provides sound guidance on design and torque specification for closure bolts. The literature also shows the uncertainty associated with use of torque to establish preload is typically between 10 and 35%. These studies have been performed under controlled, laboratory conditions. The ability to insure required preload in normal service is, consequently, an important question. The study described here investigated the relationship between indicated torque and resulting bolt load for a typical radioactive materials package closure using methods available under normal service conditions.

Smith, A.

2010-02-16T23:59:59.000Z

112

TYPICAL HOT WATER DRAW PATTERNS BASED ON FIELD DATA  

SciTech Connect (OSTI)

There is significant variation in hot water use and draw patterns among households. This report describes typical hot water use patterns in single-family residences in North America. We found that daily hot water use is highly variable both among residences and within the same residence. We compared the results of our analysis of the field data to the conditions and draw patterns established in the current U.S. Department of Energy (DOE) test procedure for residential water heaters. The results show a higher number of smaller draws at lower flow rates than used in the test procedure. The data from which the draw patterns were developed were obtained from 12 separate field studies. This report describes the ways in which we managed, cleaned, and analyzed the data and the results of our data analysis. After preparing the data, we used the complete data set to analyze inlet and outlet water temperatures. Then we divided the data into three clusters reflecting house configurations that demonstrated small, medium, or large median daily hot water use. We developed the three clusters partly to reflect efforts of the ASHRAE standard project committee (SPC) 118.2 to revise the test procedure for residential water heaters to incorporate a range of draw patterns. ASHRAE SPC 118.2 has identified the need to separately evaluate at least three, and perhaps as many as five, different water heater capacities. We analyzed the daily hot water use data within each cluster in terms of volume and number of hot water draws. The daily draw patterns in each cluster were characterized using distributions for volume of draws, duration of draws, time since previous draw, and flow rates.

Lutz, Jim; Melody, Moya

2012-11-08T23:59:59.000Z

113

Configuration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group andCompositional VariationCluster) |About Us2.1Conferencing

114

Of fishes and birthdays: Efficient estimation of polymer configurational entropies  

E-Print Network [OSTI]

We present an algorithm to estimate the configurational entropy $S$ of a polymer. The algorithm uses the statistics of coincidences among random samples of configurations and is related to the catch-tag-release method for estimation of population sizes, and to the classic "birthday paradox". Bias in the entropy estimation is decreased by grouping configurations in nearly equiprobable partitions based on their energies, and estimating entropies separately within each partition. Whereas most entropy estimation algorithms require $N\\sim 2^{S}$ samples to achieve small bias, our approach typically needs only $N\\sim \\sqrt{2^{S}}$. Thus the algorithm can be applied to estimate protein free energies with increased accuracy and decreased computational cost.

Nemenman, Ilya; Strauss, Charlie E

2015-01-01T23:59:59.000Z

115

CRAD, Configuration Management - Oak Ridge National Laboratory...  

Broader source: Energy.gov (indexed) [DOE]

Configuration Management - Oak Ridge National Laboratory High Flux Isotope Reactor CRAD, Configuration Management - Oak Ridge National Laboratory High Flux Isotope Reactor February...

116

CRAD, Configuration Management - Oak Ridge National Laboratory...  

Broader source: Energy.gov (indexed) [DOE]

Configuration Management - Oak Ridge National Laboratory High Flux Isotope Reactor Contractor ORR CRAD, Configuration Management - Oak Ridge National Laboratory High Flux Isotope...

117

Nuclear Hybrid Energy Systems: Imperatives, Prospects, and Challenges  

SciTech Connect (OSTI)

As global population reaches an expected 8 billion people by 2030, primary energy consumption is expected to increase by almost 40% from approximately 520 exajoules consumed today to almost 740 exajoules. Much of this increase is expected to come from non-Organization for Economic Cooperation and Development (OECD) nations, and Asia specifically. In these economies, energy used for transportation is expected to grow substantially, as is industrial, commercial and to a lesser degree residential energy use, creating considerable pressure on global and local energy markets. The magnitude and timing of growth in energy consumption likely will create a global imperative to deploy energy production technologies that balance the three pillars of energy security: • economic stability – related to the affordability of energy products, stability and predictability in their price, and the efficient and effective deployment of global capital resources in their development; • environmental sustainability – related to minimizing the negative impacts of energy production to air, land, and water systems and advancing the long-term viability of using a particular resource in a way that does not limit future generations ability to prosper; • resource security – related to the ability to access energy resources and products where and when necessary, in an affordable and predictable manner. One approach to meeting these objectives is hybrid energy systems (HES). Broadly described, HES are energy product production plants that take two or more energy resource inputs (typically includes both carbon and non-carbon based sources) and produce two or more energy products (e.g. electricity, liquid transportation fuels, industrial chemicals) in an integrated plant. Nuclear energy integration into HES offers intriguing potential, particularly if smaller (<300 MWe) reactors are available. Although the concept of using nuclear energy in a variety of non-electrical process applications is certainly not new, renewed interest in more tightly coupled energy product plants (such as HES) that meet the objectives outline above have gained additional interest recently, an interest likely sparked by sharpening energy security concerns. Studies have shown that non-nuclear integrated (hybrid) energy systems can have appealing attributes in terms of overall process efficiency, enhanced electric grid stability, renewable energy integration, and economic performance, and lifecycle greenhouse gas emissions. These attributes seem to be sufficiently compelling that several significant commercial investments in fossil-renewable HES are being made in the United States while the U.S. Defense Advanced Research Projects Agency (DARPA) has openly solicited information regarding nuclear energy integration schemes. The challenges of nuclear energy integration include myriad issues associated with the following RD&D areas, or “platforms”: • feedstock processing (e.g. bio-feedstock integration with coal, carbon feedstock extraction using nuclear energy); • heat / energy management (e.g. advanced heat exchangers, process design); • energy storage (e.g. H2 production, liquid fuels synthesis); • byproduct management (e.g. CO2 recycle approaches); • systems dynamics, integration and control (e.g. process dynamics analyses and optimization, advanced prognostics, diagnostics, variable time scale control and flow sheet optimization).

Steven E. Aumeier

2010-10-01T23:59:59.000Z

118

Model Ordinance for Siting of Wind-Energy Systems  

Broader source: Energy.gov [DOE]

In 2009, the South Dakota Public Utilities Commission (PUC) created a [http://puc.sd.gov/commission/twg/WindEnergyOrdinance.pdf model ordinance] for siting wind-energy systems. This nine-page model...

119

Energy Conservation Aspect of Energy Systems Technology Education Program  

E-Print Network [OSTI]

The primary purpose of this paper is to present a brief explanation of the Energy Systems Technology Education Program (ESTEP). This program is a system of continuing education that has been devised for the technical and supervisory personnel...

McBride, R. B.

1982-01-01T23:59:59.000Z

120

Tax Credit for Solar Energy Systems on Residential Property (Corporate)  

Broader source: Energy.gov [DOE]

'''''Note: HB 705 of 2013 made several significant changes to this tax credit. Among other changes, wind energy systems are no longer eligible, there is now an expiration date for the credit, and...

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Enforcement Letter, Lockheed Martin Energy Systems, Inc. - September...  

Broader source: Energy.gov (indexed) [DOE]

September 4, 1997 Issued to Lockheed Martin Energy Systems, Inc., related to the Erroneous Transfer of Mixed Waste to a Landfill at the K-25 Site On September 4, 1997, the U.S....

122

NREL: Systems Engineering - 2013 Wind Energy Systems Engineering...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

3 Wind Energy Systems Engineering Workshop Photo of a seated audience with a presenter at a podium and a projection screen in the background. Paul Veers addresses the workshop...

123

Small Business Innovation Research Award Success Story: Proton Energy Systems  

Fuel Cell Technologies Publication and Product Library (EERE)

This success story describes Proton Energy Systems, a small business that designs and manufactures proton exchange membrane (PEM) electrolysis sytems to produce hydrogen from water. The U.S. Departmen

124

Local Option- Solar, Wind and Biomass Energy Systems Exemption  

Broader source: Energy.gov [DOE]

Section 487 of the New York State Real Property Tax Law provides a 15-year real property tax exemption for solar, wind energy, and farm-waste energy systems constructed in New York State. As...

125

Town of Kill Devil Hills- Wind Energy Systems Ordinance  

Broader source: Energy.gov [DOE]

In October 2007, the town of Kill Devil Hills adopted an ordinance to regulate the use of wind-energy systems. The ordinance directs any individual or organization wishing to install a wind-energy...

126

Property Tax Exemption for Solar and Wind Energy Systems  

Broader source: Energy.gov [DOE]

In May 2007, Maryland established a property tax exemption for residential solar energy systems. Under this law solar energy devices “installed to heat or cool a dwelling, generate electricity to...

127

City of Tucson- Permit Fee Credit for Solar Energy Systems  

Broader source: Energy.gov [DOE]

The City of Tucson passed Resolution No. 20193 on September 27, 2005, to encourage the installation of solar energy systems throughout the city. The resolution established a policy whereby the...

128

Tax Credit for Solar Energy Systems on Residential Property (Personal)  

Broader source: Energy.gov [DOE]

'''''Note: HB 705 of 2013 made several significant changes to this tax credit. Among other changes, wind energy systems are no longer eligible, there is now an expiration date for the credit, and...

129

CRAD, Configuration Management Assessment Plan  

Broader source: Energy.gov [DOE]

The objective of this assessment is to determine whether a Configuration Management Program (CM) is in place which allows for the availability and retrievability of accurate information, improves response to design and operational decisions, enhances worker safety, increases facility safety and reliability, increases efficiency of work efforts, and helps maintain integrity of interfacing orders.

130

Discretized configurations and partial partitions  

E-Print Network [OSTI]

We show that the discretized configuration space of $k$ points in the $n$-simplex is homotopy equivalent to a wedge of spheres of dimension $n-k+1$. This space is homeomorphic to the order complex of the poset of ordered partial partitions of $\\{1,\\...,n+1\\}$ with exactly $k$ parts. We also compute the Euler characteristic in two different ways, thereby obtaining a topological proof of a combinatorial recurrence satisfied by the Stirling numbers of the second kind.

Abrams, Aaron; Hower, Valerie

2010-01-01T23:59:59.000Z

131

Life cycle analysis of energy systems: Methods and experience  

SciTech Connect (OSTI)

Fuel-cycle analysis if not the same as life-cycle analysis, although the focus on defining a comprehensive system for analysis leads toward the same path. This approach was the basis of the Brookhaven Reference Energy System. It provided a framework for summing total effects over an explicitly defined fuel cycle. This concept was computerized and coupled with an extensive data base in ESNS -- the Energy Systems Network Simulator. As an example, ESNS was the analytical basis for a comparison of health and environmental effects of several coal conversion technologies. With advances in computer systems and methods, however, ESNS has not been maintained at Brookhaven. The RES approach was one of the bases of the OECD COMPASS Project and the UNEP comparative assessment of environmental impacts of energy sources. An RES model alone has limitations in analyzing complex energy systems, e.g., it is difficult to handle feedback in the network. The most recent version of a series of optimization models is MARKAL, a dynamic linear programming model now used to assess strategies to reduce greenhouse gas emissions from the energy system. MARKAL creates an optimal set of reference energy systems over multiple time periods, automatically incorporating dynamic feedback and allowing fuel switching and end-use conservation to meet useful energy demands.

Morris, S.C.

1992-08-01T23:59:59.000Z

132

Life cycle analysis of energy systems: Methods and experience  

SciTech Connect (OSTI)

Fuel-cycle analysis if not the same as life-cycle analysis, although the focus on defining a comprehensive system for analysis leads toward the same path. This approach was the basis of the Brookhaven Reference Energy System. It provided a framework for summing total effects over an explicitly defined fuel cycle. This concept was computerized and coupled with an extensive data base in ESNS -- the Energy Systems Network Simulator. As an example, ESNS was the analytical basis for a comparison of health and environmental effects of several coal conversion technologies. With advances in computer systems and methods, however, ESNS has not been maintained at Brookhaven. The RES approach was one of the bases of the OECD COMPASS Project and the UNEP comparative assessment of environmental impacts of energy sources. An RES model alone has limitations in analyzing complex energy systems, e.g., it is difficult to handle feedback in the network. The most recent version of a series of optimization models is MARKAL, a dynamic linear programming model now used to assess strategies to reduce greenhouse gas emissions from the energy system. MARKAL creates an optimal set of reference energy systems over multiple time periods, automatically incorporating dynamic feedback and allowing fuel switching and end-use conservation to meet useful energy demands.

Morris, S.C.

1992-01-01T23:59:59.000Z

133

Residential Photovoltaic Energy Systems in California: The Effect on Home Sales Prices  

E-Print Network [OSTI]

Residential Photovoltaic Energy Systems in California: Thethe marginal impacts of photovoltaic (PV) energy systems ons largest market for photovoltaic solar (PV), with nearly

Hoen, Ben

2013-01-01T23:59:59.000Z

134

Long-Term Planning for Nuclear Energy Systems Under Deep Uncertainty  

E-Print Network [OSTI]

5.3.2 Nuclear Energy System Model . . . . . . . . . . .Brief History of Nuclear Energy . . . . . . . . Nuclear FuelModeling . . . . . . . . . . . . . 5.3 Nuclear Energy System

Kim, Lance Kyungwoo

2011-01-01T23:59:59.000Z

135

Advanced Organic Vapor Cycles for Improving Thermal Conversion Efficiency in Renewable Energy Systems  

E-Print Network [OSTI]

reclamation and solar thermal energy," Energy [accepted]. [and M Dennis, "Solar thermal energy systems in Australia,"and M Dennis, "Solar thermal energy systems in Australia,"

Ho, Tony

2012-01-01T23:59:59.000Z

136

White paper on VU for Modeling Nuclear Energy Systems  

SciTech Connect (OSTI)

The purpose of this whitepaper is to provide a framework for understanding the role that Verification and Validation (V&V), Uncertainty Quantification (UQ) and Risk Quantification, collectively referred to as VU, is expected to play in modeling nuclear energy systems. We first provide background for the modeling of nuclear energy based systems. We then provide a brief discussion that emphasizes the critical elements of V&V as applied to nuclear energy systems but is general enough to cover a broad spectrum of scientific and engineering disciplines that include but are not limited to astrophysics, chemistry, physics, geology, hydrology, chemical engineering, mechanical engineering, civil engineering, electrical engineering, nu nuclear engineering material clear science science, etc. Finally, we discuss the critical issues and challenges that must be faced in the development of a viable and sustainable VU program in support of modeling nuclear energy systems.

Klein, R; Turinsky, P

2009-05-07T23:59:59.000Z

137

Dimensional regularization in configuration space  

SciTech Connect (OSTI)

Dimensional regularization is introduced in configuration space by Fourier transforming in {nu} dimensions the perturbative momentum space Green functions. For this transformation, the Bochner theorem is used; no extra parameters, such as those of Feynman or Bogoliubov and Shirkov, are needed for convolutions. The regularized causal functions in {ital x} space have {nu}-dependent moderated singularities at the origin. They can be multiplied together and Fourier transformed (Bochner) without divergence problems. The usual ultraviolet divergences appear as poles of the resultant analytic functions of {nu}. Several examples are discussed. {copyright} {ital 1996 The American Physical Society.}

Bollini, C.G. [Facultad de Ciencias Exactas de La Universidad de La Plata, Departamento de Fisica, C.C. 67 La Plata (Argentina)] [Facultad de Ciencias Exactas de La Universidad de La Plata, Departamento de Fisica, C.C. 67 La Plata (Argentina); [Comision de Investigaciones Cientificas de La Provincia de Buenos Aires, Buenos Aires (Argentina); Giambiagi, J.J. [Centro Brasileiro de Pesquisas Fisicas--CBPF, Rua Dr. Xavier Sigaud, 150, 22.290-180 Rio de Janeiro RJ, (Brasil)] [Centro Brasileiro de Pesquisas Fisicas--CBPF, Rua Dr. Xavier Sigaud, 150, 22.290-180 Rio de Janeiro RJ, (Brasil)

1996-05-01T23:59:59.000Z

138

FED pumped limiter configuration issues  

SciTech Connect (OSTI)

Impurity control in the Fusion Engineering Device (FED) is provided by a toroidal belt pumped limiter. Limiter design issues addressed in this paper are (1) poloidal location of the limiter belt, (2) shape of the limiter surface facing the plasma, and (3) whether the belt is pumped from one or both sides. The criteria used for evaluation of limiter configuration features were sensitivity to plasma-edge conditions and ease of maintenance and fabrication. The evaluation resulted in the selection of a baseline FED limiter that is located at the bottom of the device and has a flat surface with a single leading edge.

Haines, J.R.; Fuller, G.M.

1983-01-01T23:59:59.000Z

139

Multiple forearm robotic elbow configuration  

DOE Patents [OSTI]

A dual forearmed robotic elbow configuration comprises a main arm having a double elbow from which two coplanar forearms depend, two actuators carried in the double elbow for moving the forearms, and separate, independent end effectors, operated by a cable carried from the main arm through the elbow, is attached to the distal end of each forearm. Coiling the cables around the actuators prevents bending or kinking when the forearms are rotated 360 degrees. The end effectors can have similar or different capabilities. Actuator cannisters within the dual elbow are modular for rapid replacement or maintenance. Coarse and fine resolver transducers within the actuators provide accurate position referencing information.

Fisher, John J. (Wilmington, DE)

1990-01-01T23:59:59.000Z

140

Euclid Hardware and Software Configuration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series toESnet4:Epitaxial Thin Film XRD Epitaxial ThinHeatersEmailConfiguration

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Nuclear Hybrid Energy System Modeling: RELAP5 Dynamic Coupling Capabilities  

SciTech Connect (OSTI)

The nuclear hybrid energy systems (NHES) research team is currently developing a dynamic simulation of an integrated hybrid energy system. A detailed simulation of proposed NHES architectures will allow initial computational demonstration of a tightly coupled NHES to identify key reactor subsystem requirements, identify candidate reactor technologies for a hybrid system, and identify key challenges to operation of the coupled system. This work will provide a baseline for later coupling of design-specific reactor models through industry collaboration. The modeling capability addressed in this report focuses on the reactor subsystem simulation.

Piyush Sabharwall; Nolan Anderson; Haihua Zhao; Shannon Bragg-Sitton; George Mesina

2012-09-01T23:59:59.000Z

142

Canada Research Chair (Tier 2) Renewable Energy Systems  

E-Print Network [OSTI]

intends to take a leadership role in developing research to support local renewable energy systems with environmental concerns related to fossil fuel consumption call for the development of new sources of energy of such systems include local/regional energy security and diversification of local economies. A key challenge

Northern British Columbia, University of

143

SOLAR IRRADIANCE FORECASTING FOR THE MANAGEMENT OF SOLAR ENERGY SYSTEMS  

E-Print Network [OSTI]

SOLAR IRRADIANCE FORECASTING FOR THE MANAGEMENT OF SOLAR ENERGY SYSTEMS Detlev Heinemann Oldenburg.girodo@uni-oldenburg.de ABSTRACT Solar energy is expected to contribute major shares of the future global energy supply. Due to its and solar energy conversion processes has to account for this behaviour in respective operating strategies

Heinemann, Detlev

144

Models of National Energy Systems -focusing on biomass energy  

E-Print Network [OSTI]

Models of National Energy Systems - focusing on biomass energy Poul Erik Grohnheit Systems Analysis models · International development of large energy models · Biomass energy · Upstream expansion of the Pan European model for biomass and crops · Basic elements in a crop model for Denmark· Basic elements

145

Energy Systems & Climate Change The Evergreen St. College  

E-Print Network [OSTI]

project · Investigate your question; test your hypotheses · Build something? Generate and/or analyze data. Reference: For each of your sources, start with the data: · Books: Title, Author, year (publisher, ISBNResearch in Energy Systems & Climate Change The Evergreen St. College Dr. E.J. Zita zita

Zita, E.J.

146

ECE 414A/514A Photovoltaic Solar Energy Systems  

E-Print Network [OSTI]

ECE 414A/514A Photovoltaic Solar Energy Systems Instructor: Prof. Raymond K. Kostuk Time: MWF 04, the characteristics of solar illumination, and the advantages and characteristics of concentrating and light kostuk@ece.arizona.edu Class webpage: ece.Arizona.edu/~ece414a Abstract: The solar illumination reaching

Arizona, University of

147

The Martin Marietta Energy Systems personnel neutron dosimetry program  

SciTech Connect (OSTI)

Martin Marietta Energy Systems, Inc. (Energy Systems), manages five sites for the US Department of Energy. Personnel dosimetry for four of the five sites is coordinated through a Centralized External Dosimetry System (CEDS). These four sites are the Oak Ridge National Laboratory (ORNL), the Oak Ridge Y-12 Plant (Y-12), the Oak Ridge K-25 Site (K-25), and the Paducah Gaseous Diffusion Plant (PGDP). The fifth Energy Systems site, Portsmouth Gaseous Diffusion Plant, has an independent personnel dosimetry program. The current CEDS personnel neutron dosimeter was first issued in January 1989, after an evaluation and characterization of the dosimeters` response in the workplaces was performed. For the workplace characterization, Energy Systems contracted with Battelle Pacific Northwest Laboratory (PNL) to perform neutron measurements at selected locations at ORNL and Y-12. K-25 and PGDP were not included because their neutron radiation fields were similar to others already planned for characterization at ORNL and Y-12. Since the initial characterization, PNL has returned to Oak Ridge twice to perform follow up measurements, and another visit is planned in the near future.

McMahan, K.L.

1991-12-31T23:59:59.000Z

148

Duald fold tail vane assembly for wind energy systems  

SciTech Connect (OSTI)

An improvement of the device disclosed in U.S. Pat. No. 4,297,075 permits the propeller assembly of a wind energy system to swing in two directions, both left and right with respect to wind direction. The improvement includes a snubber assembly which has a plurality of springs mounted on a central bar.

Jacobs, M. L.; Jacobs, P. R.

1985-05-21T23:59:59.000Z

149

Cyber-Physical Energy Systems: Focus on Smart Buildings  

E-Print Network [OSTI]

of a deeply coupled system of energy usage, comfort and work derived. At a macroscale, buildings use approxi computers and laptops in offices and homes will exceed over 3x the energy use by all data centers combinedCyber-Physical Energy Systems: Focus on Smart Buildings Jan Kleissl Dept. of Mechanical

Gupta, Rajesh

150

Integrated Deployment and the Energy Systems Integration Facility: Workshop Proceedings  

SciTech Connect (OSTI)

This report summarizes the workshop entitled: Integrated Deployment and the Energy Systems Integration Facility. In anticipation of the opening of the ESIF, NREL held the workshop August 21-23, 2012 and invited participants from utilities, government, industry, and academia to discuss renewable integration challenges and discover new ways to meet them by taking advantage of the ESIF's capabilities.

Kroposki, B.; Werner, M.; Spikes, A.; Komomua, C.

2013-01-01T23:59:59.000Z

151

MODELING INFRASTRUCTURE FOR A FOSSIL HYDROGEN ENERGY SYSTEM  

E-Print Network [OSTI]

MODELING INFRASTRUCTURE FOR A FOSSIL HYDROGEN ENERGY SYSTEM WITH CO2 SEQUESTRATION Joan M. Ogden Production of hydrogen (H2) from fossil fuels with capture and sequestration of CO2 offers a route toward would require building two new pipeline infrastructures: one for distributing H2 to end-users and one

152

Ris Energy Report 7 Future low carbon energy systems  

E-Print Network [OSTI]

Risø Energy Report 7 Future low carbon energy systems Reprint of summary and recommendations Risø-R-1651(EN) October 2008 Edited by Hans Larsen and Leif Sønderberg Petersen #12;Risø Energy Report 7 Preface This Risø Energy Report, the seventh of a series that began in 2002, takes as its point

153

Beyond Energy Monitors: Interaction, Energy, and Emerging Energy Systems  

E-Print Network [OSTI]

Beyond Energy Monitors: Interaction, Energy, and Emerging Energy Systems James Pierce, Eric Paulos, paulos} @ cs.cmu.edu ABSTRACT Motivated by a recent surge of research related to energy and sustainability, this paper presents a review of energy- related work within HCI as well as from literature

Paulos, Eric

154

Energy systems impacts desalination in Jordan Poul Alberg stergaard*  

E-Print Network [OSTI]

sources. Work has been done on the potential of geothermal energy in Jordan [3], solar energy [4-6], wind efficiency of conversion systems, increasing the use of renewable energy sources and exploiting synergies affects the energy systems as other large scale electricity demands. In order to reduce the climate change

Kolaei, Alireza Rezania

155

Case Studies of Onsite Energy Systems for Healthcare Facilities  

E-Print Network [OSTI]

of Central Texas. Combining the high efficiency, low emission, 4.6 MW Solar Turbines Mercury-50 combustion turbine, a 1000 Ton Trane steam absorption chiller and an 8000 Ton-hr Thermal Energy Storage tank, this onsite energy system is designed to achieve...

Schwass, R.

2008-01-01T23:59:59.000Z

156

A Smart Energy System: Distributed Resource Management, Control and Optimization  

E-Print Network [OSTI]

A Smart Energy System: Distributed Resource Management, Control and Optimization Yong Ding, Student of distributed energy resource and consumption management, which proposes to design a networked and embedded platform for realizing a dynamic energy mix and optimizing the energy consumption dy- namically. Based

Beigl, Michael

157

advanced energy systems: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

energy systems First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Energy storage systems for advanced...

158

applying energy system: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

applying energy system First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 California Energy Commission...

159

DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND  

E-Print Network [OSTI]

DEVELOPMENT OF OPTIMUM DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE Prepared DESIGN CONFIGURATION AND PERFORMANCE FOR VERTICAL AXIS WIND TURBINE EISG AWARDEE Mechanical and Aerospace://www.energy.ca.gov/research/index.html. #12;Page 1 Development Of Optimum Design Configuration And Performance For Vertical Axis Wind Turbine

160

VLA HYBRID CONFIGURATIONS A Critical Look  

E-Print Network [OSTI]

VLA HYBRID CONFIGURATIONS A Critical Look Barry Clark EVLA Memo 180 July 2014 The VLA hybrid weeks (plus the two week hybrid), whereas going directly from one main configuration to another could 4.5%. 2. The time requests in the hybrid configuration are heavily weighted to the galactic center

Groppi, Christopher

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Ris Energy Report 4 Supply technologies in the future energy system 10 Supply technologies in the future energy system  

E-Print Network [OSTI]

fuel (REtrol, Chapter 4) or heat, whether from direct electric heating, or heat pumps. Other uses the interaction between wind turbines, other energy sources and consumers in the electricity system. Biomass is combusted for heat and power (24%), A key theme of this chapter is that the energy systems should be (and

162

Gearbox Typical Failure Modes, Detection, and Mitigation Methods (Presentation)  

SciTech Connect (OSTI)

This presentation was given at the AWEA Operations & Maintenance and Safety Seminar and focused on what the typical gearbox failure modes are, how to detect them using detection techniques, and strategies that help mitigate these failures.

Sheng, S.

2014-01-01T23:59:59.000Z

163

Structure of The Dixie Valley Geothermal System, a "Typical"...  

Open Energy Info (EERE)

Dixie Valley Geothermal System, a "Typical" Basin and Range Geothermal System, From Thermal and Gravity Data Jump to: navigation, search OpenEI Reference LibraryAdd to library...

164

Typical support and Sanov large deviations of correlated states  

E-Print Network [OSTI]

Discrete stationary classical processes as well as quantum lattice states are asymptotically confined to their respective typical support, the exponential growth rate of which is given by the (maximal ergodic) entropy. In the iid case the distinguishability of typical supports can be asymptotically specified by means of the relative entropy, according to Sanov's theorem. We give an extension to the correlated case, referring to the newly introduced class of HP-states.

I. Bjelakovic; J. -D. Deuschel; T. Krueger; R. Seiler; Ra. Siegmund-Schultze; A. Szkola

2007-03-28T23:59:59.000Z

165

DOE Announces Webinars on Energy Systems Advances, Hydrogen Safety...  

Energy Savers [EERE]

typically required. You can also watch archived webinars and browse previously aired videos, slides, and transcripts. Upcoming Webinars September 10: Live Webinar on the Hydrogen...

166

Nuclear Hybrid Energy Systems: Molten Salt Energy Storage  

SciTech Connect (OSTI)

With growing concerns in the production of reliable energy sources, the next generation in reliable power generation, hybrid energy systems, are being developed to stabilize these growing energy needs. The hybrid energy system incorporates multiple inputs and multiple outputs. The vitality and efficiency of these systems resides in the energy storage application. Energy storage is necessary for grid stabilizing and storing the overproduction of energy to meet peak demands of energy at the time of need. With high thermal energy production of the primary nuclear heat generation source, molten salt energy storage is an intriguing option because of its distinct properties. This paper will discuss the different energy storage options with the criteria for efficient energy storage set forth, and will primarily focus on different molten salt energy storage system options through a thermodynamic analysis

P. Sabharwall; M. Green; S.J. Yoon; S.M. Bragg-Sitton; C. Stoots

2014-07-01T23:59:59.000Z

167

Dosimetry quality assurance in Martin Marietta Energy Systems' centralized external dosimetry system  

SciTech Connect (OSTI)

External dosimetry needs at the four Martin Marietta Energy Systems facilities are served by Energy Systems Centralized External Dosimetry System (CEDS). The CEDS is a four plant program with four dosimeter distribution centers and two dosimeter processing centers. Each plant has its own distribution center, while processing centers are located at ORNL and the Y-12 Plant. The program has been granted accreditation by the Department of Energy Laboratory Accreditation Program (DOELAP). The CEDS is a TLD based system which is responsible for whole-body beta-gamma, neutron, and extremity monitoring. Beta-gamma monitoring is performed using the Harshaw/Solon Technologies model 8805 dosimeter. Effective October 1, 1992 the standard silver mylar has been replaced with an Avery mylar foil blackened on the underside with ink. This was done in an effort to reduce the number of light induced suspect readings. At this time we have little operational experience with the new blackened mylars-The CEDS neutron dosimeter is the Harshaw model 8806B. This card/holder configuration contains two TLD-600/TLD-700 chip pairs; one pair is located beneath a cadmium filter and one pair is located beneath a plastic filter. In routine personnel monitoring the CEDS neutron dosimeter is always paired with a CEDS beta-gamma dosimeter.The CEDS extremity dosimeter is composed of a Harshaw thin TLD-700 dosiclip placed inside a Teledyne RB-4 finger sachet. The finger sachet provides approximately 7 mg/cm[sup 2] filtration over the chip. A teflon ring surrounds the dosiclip to help prevent tearing of the vinyl sachet.

Souleyrette, M.L.

1992-10-23T23:59:59.000Z

168

Energy Systems High Pressure Test Laboratory (Fact Sheet)  

SciTech Connect (OSTI)

This fact sheet describes the purpose, lab specifications, applications scenarios, and information on how to partner with NREL's Energy Systems High Pressure Test Laboratory at the Energy Systems Integration Facility. The purpose of the Energy Systems High Pressure Test Laboratory at NREL's Energy Systems Integration Facility (ESIF) is to provide space where high pressure hydrogen components can be safely tested. High pressure hydrogen storage is an integral part of energy storage technology for use in fuel cell and in other distributed energy scenarios designed to effectively utilize the variability inherent with renewable energy sources. The high pressure storage laboratory is co-located with energy storage activities such as ultra-capacitors, super conducting magnetic flywheel and mechanical energy storage systems laboratories for an integrated approach to system development and demonstration. Hazards associated with hydrogen storage at pressures up to 10,000 psi include oxygen displacement, combustion, explosion, and pressurization of room air due to fast release and physical hazards associated with burst failure modes. A critical understanding of component failure modes is essential in developing reliable, robust designs that will minimize failure risk beyond the end of service life. Development of test protocol for accelerated life testing to accurately scale to real world operating conditions is essential for developing regulations, codes and standards required for safe operation. NREL works closely with industry partners in providing support of advanced hydrogen technologies. Innovative approaches to product design will accelerate commercialization into new markets. NREL works with all phases of the product design life cycle from early prototype development to final certification testing. High pressure tests are performed on hydrogen components, primarily for the validation of developing new codes and standards for high pressure hydrogen applications. The following types of tests can be performed: Performance, Component and system level efficiency, Strength of materials and hydrogen compatibility, Safety demonstration, Model validation, and Life cycle reliability.

Not Available

2011-10-01T23:59:59.000Z

169

Optimizing Process Loads in Industrial Cogeneration Energy Systems  

E-Print Network [OSTI]

applied to power generation and industrial cogeneration are extended to solving this trigeneration problem where the optimum dispatch of the final load devices (i.e. compressors, fans, pumps, etc.) are an integral part of the total energy system...-04-29 Proceedings from the Seventeenth Industrial Energy Technology Conference, Houston, TX, April 5-6, 1995 optimum dispatch solutions, and an iterative simultaneous solution of the integrated system is required. The solution dependency arises when the end use...

Ahner, D. J.; Babson, P. E.

170

Integrated Nuclear-Renewable Energy Systems: Foundational Workshop Report  

SciTech Connect (OSTI)

The U.S. Department of Energy (DOE) recognizes the need to transform the energy infrastructure of the U.S. and elsewhere to systems that can drastically reduce environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. Thus, DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options. A concept being advanced by the DOE Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) is tighter coupling of nuclear and renewable energy sources in a manner that produces new energy currency for the combined electricity grid, industrial manufacturing, and the transportation energy sectors. This integration concept has been referred to as a “hybrid system” that is capable of providing the right type of energy, at the right time, in the right place. At the direction of DOE-NE and DOE-EERE leadership, project leads at Idaho National Laboratory (INL), National Renewable Energy Laboratory (NREL) and Massachusetts Institute of Technology (MIT) have identified and engaged stakeholders in discussing integrated energy systems that would optimize renewable and nuclear energy integration on a region-by-region basis. Subsequent work will entail conduct of technical, economic, environmental and socio-political evaluations of the leading integrated system options based on a set of criteria established with stakeholder input. The Foundational Workshop for Integrated Nuclear – Renewable Energy Systems was organized around the following objectives: 1. Identify and refine priority region-specific opportunities for integrated nuclear-renewable energy systems in the U.S.; 2. Select Figures of Merit (FOM) to rank and prioritize candidate systems; 3. Discuss enabling technology development needs; 4. Identify analysis requirements, capabilities and gaps to estimate FOM for integrated system options; 5. Identify experimental needs to develop and demonstrate nuclear-renewable energy systems.

Shannon Bragg-Sitton; Richard Boardman; John Collins; Mark Ruth; Owen Zinaman; Charles Forsberg

2014-08-01T23:59:59.000Z

171

Solar-hydrogen energy system model for Libya  

SciTech Connect (OSTI)

A solar-hydrogen energy-system model for Libya was developed, obtaining relationships for and between the main energy and energy related parameters of Libya and the world. The parameters included are: population, energy demand, fossil-fuel production, fossil-fuel resources, hydrogen production, hydrogen introduction rates, energy prices, gross domestic product, pollution and quality of life. The trends of these parameters with and without hydrogen introduction were investigated over a period of time - through the year 2100. The results indicate that the fossil-fuel resources in Libya could be exhausted, due to production for local and export demands, within three to four decades unless serious measures for reducing production are taken. The results indicate that adopting solar-hydrogen energy system would extend the availability of fossil-fuel resources for a longer time period, reduce pollution, improve quality of life and establish a permanent energy system for Libya. It also shows that eventually Libya could export hydrogen in lieu of oil and natural gas.

Eljrushi, G.S.

1987-01-01T23:59:59.000Z

172

Nuclear-renewable hybrid energy systems: Opportunities, interconnections, and needs  

SciTech Connect (OSTI)

As the U.S. energy system evolves, the amount of electricity from variable-generation sources is likely to increase, which could result in additional times when electricity demand is lower than available production. Thus, purveyors of technologies that traditionally have provided base-load electricity—such as nuclear power plants—can explore new operating procedures to deal with the associated market signals. Concurrently, innovations in nuclear reactor design coupled with sophisticated control systems now allow for more complex apportionment of heat within an integrated system such as one linked to energy-intensive chemical processes. This paper explores one opportunity – nuclear-renewable hybrid energy systems. These are defined as integrated facilities comprised of nuclear reactors, renewable energy generation, and industrial processes that can simultaneously address the need for grid flexibility, greenhouse gas emission reductions, and optimal use of investment capital. Six aspects of interaction (interconnections) between elements of nuclear-renewable hybrid energy systems are identified: Thermal, electrical, chemical, hydrogen, mechanical, and information. Additionally, system-level aspects affect selection, design, and operation of this hybrid system type. Throughout the paper, gaps and research needs are identified to promote further exploration of the topic.

Mark F. Ruth; Owen R. Zinaman; Mark Antkowiak; Richard D. Boardman; Robert S. Cherry; Morgan D. Bazilian

2014-02-01T23:59:59.000Z

173

Evaluation of energy system analysis techniques for identifying underground facilities  

SciTech Connect (OSTI)

This report describes the results of a study to determine the feasibility and potential usefulness of applying energy system analysis techniques to help detect and characterize underground facilities that could be used for clandestine activities. Four off-the-shelf energy system modeling tools were considered: (1) ENPEP (Energy and Power Evaluation Program) - a total energy system supply/demand model, (2) ICARUS (Investigation of Costs and Reliability in Utility Systems) - an electric utility system dispatching (or production cost and reliability) model, (3) SMN (Spot Market Network) - an aggregate electric power transmission network model, and (4) PECO/LF (Philadelphia Electric Company/Load Flow) - a detailed electricity load flow model. For the purposes of most of this work, underground facilities were assumed to consume about 500 kW to 3 MW of electricity. For some of the work, facilities as large as 10-20 MW were considered. The analysis of each model was conducted in three stages: data evaluation, base-case analysis, and comparative case analysis. For ENPEP and ICARUS, open source data from Pakistan were used for the evaluations. For SMN and PECO/LF, the country data were not readily available, so data for the state of Arizona were used to test the general concept.

VanKuiken, J.C.; Kavicky, J.A.; Portante, E.C. [and others

1996-03-01T23:59:59.000Z

174

Metrics for measuring distances in configuration spaces  

SciTech Connect (OSTI)

In order to characterize molecular structures we introduce configurational fingerprint vectors which are counterparts of quantities used experimentally to identify structures. The Euclidean distance between the configurational fingerprint vectors satisfies the properties of a metric and can therefore safely be used to measure dissimilarities between configurations in the high dimensional configuration space. In particular we show that these metrics are a perfect and computationally cheap replacement for the root-mean-square distance (RMSD) when one has to decide whether two noise contaminated configurations are identical or not. We introduce a Monte Carlo approach to obtain the global minimum of the RMSD between configurations, which is obtained from a global minimization over all translations, rotations, and permutations of atomic indices.

Sadeghi, Ali, E-mail: ali.sadeghi@unibas.ch; Ghasemi, S. Alireza; Schaefer, Bastian; Mohr, Stephan; Goedecker, Stefan [Department of Physics, Universität Basel, Klingelbergstr. 82, 4056 Basel (Switzerland)] [Department of Physics, Universität Basel, Klingelbergstr. 82, 4056 Basel (Switzerland); Lill, Markus A. [Department of Medicinal Chemistry and Molecular Pharmacology, College of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, Indiana 47907 (United States)] [Department of Medicinal Chemistry and Molecular Pharmacology, College of Pharmacy, Purdue University, 575 Stadium Mall Drive, West Lafayette, Indiana 47907 (United States)

2013-11-14T23:59:59.000Z

175

Robust Neuroimaging-Based Classification Techniques of Autistic vs. Typically  

E-Print Network [OSTI]

abnormalities in several brain regions. Increased head size was the first observed characteristic in children1 Robust Neuroimaging-Based Classification Techniques of Autistic vs. Typically Developing Brain with autism. According to the published studies, different anatomical structures of the brain have been

Farag, Aly A.

176

Energy-Efficient Lighting The typical American family spends more  

E-Print Network [OSTI]

Energy-Efficient Lighting The typical American family spends more than $1,500 a year on household energy bills--and many households spend considerably more. Costs could climb even higher in the future, as electricity and natural gas prices continue to rise. Investing money in energy-saving products like compact

177

Advanced Organic Vapor Cycles for Improving Thermal Conversion Efficiency in Renewable Energy Systems  

E-Print Network [OSTI]

waste heat reclamation and solar thermal energy," Energy [K Lovegrove and M Dennis, "Solar thermal energy systems inK Lovegrove and M Dennis, "Solar thermal energy systems in

Ho, Tony

2012-01-01T23:59:59.000Z

178

Nanoengineered surfaces for improvements in energy systems : application to concentrated solar and geothermal power plants  

E-Print Network [OSTI]

The main drawback to renewable energy systems is the higher cost of production compared to competitors such as fossil fuels. Thus, there is a need to increase the efficiency of renewable energy systems in an effort to make ...

Rehn, Alexander W. (Alexander William)

2012-01-01T23:59:59.000Z

179

Configurations for short period rf undulators  

DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

Several configurations for rf undulators energized at millimeter wavelengths and designed to produce coherent nanometer radiation from sub-GeV electron beams are analyzed and compared with one another. These configurations include a traveling-wave resonant ring, a standing wave resonator, and a resonator operating close to cutoff.

Kuzikov, S. V.; Jiang, Y.; Marshall, T. C.; Sotnikov, G. V.; Hirshfield, J. L.

2013-07-01T23:59:59.000Z

180

A manual of recommended practices for hydrogen energy systems  

SciTech Connect (OSTI)

Technologies for the production, distribution, and use of hydrogen are rapidly maturing and the number and size of demonstration programs designed to showcase emerging hydrogen energy systems is expanding. The success of these programs is key to hydrogen commercialization. Currently there is no comprehensive set of widely-accepted codes or standards covering the installation and operation of hydrogen energy systems. This lack of codes or standards is a major obstacle to future hydrogen demonstrations in obtaining the requisite licenses, permits, insurance, and public acceptance. In a project begun in late 1996 to address this problem, W. Hoagland and Associates has been developing a Manual of Recommended Practices for Hydrogen Systems intended to serve as an interim document for the design and operation of hydrogen demonstration projects. It will also serve as a starting point for some of the needed standard-setting processes. The Manual will include design guidelines for hydrogen procedures, case studies of experience at existing hydrogen demonstration projects, a bibliography of information sources, and a compilation of suppliers of hydrogen equipment and hardware. Following extensive professional review, final publication will occur later in 1997. The primary goal is to develop a draft document in the shortest possible time frame. To accomplish this, the input and guidance of technology developers, industrial organizations, government R and D and regulatory organizations and others will be sought to define the organization and content of the draft Manual, gather and evaluate available information, develop a draft document, coordinate reviews and revisions, and develop recommendations for publication, distribution, and update of the final document. The workshop, Development of a Manual of Recommended Practices for Hydrogen Energy Systems, conducted on March 11, 1997 in Alexandria, Virginia, was a first step.

Hoagland, W.; Leach, S. [W. Hoagland and Associates, Boulder, CO (United States)

1997-12-31T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Innovative gas energy systems for use with passive solar residences  

SciTech Connect (OSTI)

The GRI asked Booz, Allen, and Hamilton to analyze the integration of passive solar with gas-fired energy systems for heating and cooling homes. Direct gain, trombe wall, thermosiphon and thermal roof storage heating systems were studied. Solar load control, evaporative cooling, earth coupling, and night radiation cooling systems were investigated. The drawbacks of conventional gas backup systems are discussed. Innovative passive/gas combinations are recommended. These include multizone gas furnace, decentralized gas space heater, gas desiccant dehumidifier, and gas dehumidifier for basement drying. The multizone furnace saves $1500, and is recommended for Pilot Version development.

Hartman, D.; Kosar, D.

1983-06-01T23:59:59.000Z

182

V-036: EMC Smarts Network Configuration Manager Database Authenticatio...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

36: EMC Smarts Network Configuration Manager Database Authentication Bypass Vulnerability V-036: EMC Smarts Network Configuration Manager Database Authentication Bypass...

183

Evolution of the Configuration Database Design  

SciTech Connect (OSTI)

The BABAR experiment at SLAC successfully collects physics data since 1999. One of the major parts of its on-line system is the configuration database which provides other parts of the system with the configuration data necessary for data taking. Originally the configuration database was implemented in the Objectivity/DB ODBMS. Recently BABAR performed a successful migration of its event store from Objectivity/DB to ROOT and this prompted a complete phase-out of the Objectivity/DB in all other BABAR databases. It required the complete redesign of the configuration database to hide any implementation details and to support multiple storage technologies. In this paper we describe the process of the migration of the configuration database, its new design, implementation strategy and details.

Salnikov, A

2006-04-19T23:59:59.000Z

184

Maximum Photovoltaic Penetration Levels on Typical Distribution Feeders: Preprint  

SciTech Connect (OSTI)

This paper presents simulation results for a taxonomy of typical distribution feeders with various levels of photovoltaic (PV) penetration. For each of the 16 feeders simulated, the maximum PV penetration that did not result in steady-state voltage or current violation is presented for several PV location scenarios: clustered near the feeder source, clustered near the midpoint of the feeder, clustered near the end of the feeder, randomly located, and evenly distributed. In addition, the maximum level of PV is presented for single, large PV systems at each location. Maximum PV penetration was determined by requiring that feeder voltages stay within ANSI Range A and that feeder currents stay within the ranges determined by overcurrent protection devices. Simulations were run in GridLAB-D using hourly time steps over a year with randomized load profiles based on utility data and typical meteorological year weather data. For 86% of the cases simulated, maximum PV penetration was at least 30% of peak load.

Hoke, A.; Butler, R.; Hambrick, J.; Kroposki, B.

2012-07-01T23:59:59.000Z

185

Manufacturing Industrial Development for the Alternative Energy Systems-Final Report  

SciTech Connect (OSTI)

NCMS identified and developed critical manufacturing technology assessments vital to the affordable manufacturing of alternative-energy systems. NCMS leveraged technologies from other industrial sectors and worked with our extensive member organizations to provide DOE with two projects with far-reaching impact on the generation of wind energy. In the response for a call for project ideas, 26 project teams submitted ideas. Following a detailed selection criteria, two projects were chosen for development: Advanced Manufacturing for Modular Electro-kinetic (E-K) Wind Energy Conversion Technology - The goal of this project was to demonstrate that a modular wind energy technology based on electrohydrodynamic wind energy principles and employing automotive heritage high volume manufacturing techniques and modular platform design concepts can result in significant cost reductions for wind energy systems at a range of sizes from 100KW to multi-MW. During this program, the Accio/Boeing team made major progress on validating the EHD wind energy technology as commercially viable in the wind energy sector, and moved along the manufacturing readiness axis with a series of design changes that increased net system output. Hybrid Laser Arc Welding for Manufacture of Wind Towers - The goal of this research program was to reduce the cost of manufacturing wind towers through the introduction of hybrid laser arc welding (HLAW) into the supply chain for manufacturing wind towers. HLAW has the potential to enhance productivity while reducing energy consumption to offset the foreign low-cost labor advantage and thereby enhance U.S. competitiveness. HLAW technology combines laser welding and arc welding to produce an energy efficient, high productivity, welding process for heavy manufacturing. This process leverages the ability of a laser to produce deep weld penetration and the ability of gas metal arc welding (GMAW) to deposit filler material, thereby producing stable, high quality, welds on joints with gaps and mismatches typical of those seen in heavy manufacturing. Wind towers utilize varying thicknesses of steel throughout their structures to meet the mechanical load requirements while keeping material costs low. A typical tower might have as many as twelve different material thicknesses. Joining each thickness requires a unique joint design and welding approach to enable the management of quality, productivity, and mechanical properties. In this program, laser joining of materials with thicknesses ranging from 12mm to 35mm were evaluated against the standard quality and mechanical requirements for General Electric wind tower components. The joining processes demonstrated showed the ability to meet key requirements with the appropriate process controls in place.

Dr. Chuck Ryan, National Center for Manufacturing Sciences; Dr. Dawn White, Accio Energy; Mr. Duncan Pratt, General Electric Global Research

2013-01-30T23:59:59.000Z

186

Laser Inertial Fusion-based Energy: Neutronic Design Aspects of a Hybrid Fusion-Fission Nuclear Energy System  

E-Print Network [OSTI]

aspects of a hybrid fusion-fission energy system called theof a Hybrid Fusion-Fission Nuclear Energy System by Kevinof a Hybrid Fusion-Fission Nuclear Energy System by Kevin

Kramer, Kevin James

2010-01-01T23:59:59.000Z

187

A Review of Energy Storage Technologies for Marine Current Energy Systems A Review of Energy Storage Technologies for Marine Current Energy Systems  

E-Print Network [OSTI]

A Review of Energy Storage Technologies for Marine Current Energy Systems 1 A Review of Energy Storage Technologies for Marine Current Energy Systems Z. Zhoua,b,c , M.E.H. Benbouzida,* , J of fossil resources and the issue of environment lead to a global need for producing more clean energy from

Paris-Sud XI, Université de

188

July 29th -30th 2010 1Integration of Wind Power in the Danish Energy System Integration of Wind Power in the Danish Energy System  

E-Print Network [OSTI]

July 29th - 30th 2010 1Integration of Wind Power in the Danish Energy System Integration of Wind Power in the Danish Energy System Wind Integration Forum July 29th ­ 30th 2010, Portland Gitte Agersbæk Senior Engineer Energinet.dk #12;July 29th - 30th 2010 2Integration of Wind Power in the Danish Energy

189

SSI response of a typical shear wall structure. Volume 1  

SciTech Connect (OSTI)

The Simplified Methods project of the US NRC-funded Seismic Safety Margins Research Program (SSMRP) has as its goal the development of a methodology to perform routine seismic probabilistic risk assessments of commercial nuclear power plants. The study reported here develops calibration factors to relate best estimate response to design values accounting for approximations and simplifications in SSI analysis procedures. Nineteen cases were analyzed and in-structure response compared. The structure of interest was a typical shear wall structure. 6 references, 44 figures, 22 tables.

Johnson, J.J.; Schewe, E.C.; Maslenikov, O.R.

1984-04-01T23:59:59.000Z

190

Is the Sun Embedded in a Typical Interstellar Cloud?  

E-Print Network [OSTI]

The physical properties and kinematics of the partially ionized interstellar material near the Sun are typical of warm diffuse clouds in the solar vicinity. The interstellar magnetic field at the heliosphere and the kinematics of nearby clouds are naturally explained in terms of the S1 superbubble shell. The interstellar radiation field at the Sun appears to be harder than the field ionizing ambient diffuse gas, which may be a consequence of the low opacity of the tiny cloud surrounding the heliosphere. The spatial context of the Local Bubble is consistent with our location in the Orion spur.

P. C. Frisch

2008-04-23T23:59:59.000Z

191

A configuration system for Siemens Airlink  

E-Print Network [OSTI]

A configuration system for Siemens Airlink Søren Løvborg Abstract Siemens Airlink is a railway for context-free grammars . . . . . . . . 41 4.7 Parse tree transforms

192

Cognitive abilities as influenced by family configuration  

E-Print Network [OSTI]

COGNITIVE ABILITIES AS INFLUENCED BY FAMILY CONFIGURATION A Thesis by Jani ce Leanne Pate Submitted to the Graduate College of Texas ASM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE August 1979... Major Subject; Psychology COGNITIVE ABILITIES AS INFLUENCED BY FAMILY CONFIGURATION A Thesis by Jani ce Leanne Pate Approved as to style and content by: Chairman of Committee ( y' ~ ' l~ ~ J Hember / Nember (Head of Department) August 1979...

Pate, Janice Leanne

2012-06-07T23:59:59.000Z

193

Progress in passive solar energy systems. Volume 8. Part 1  

SciTech Connect (OSTI)

This book presents the papers given at a conference sponsored by the US DOE, the Solar Energy Research Institute, SolarVision, Inc., and the Southern California Solar Energy Society. The topics considered at the conference included sizing solar energy systems for agricultural applications, a farm scale ethanol production plant, the EEC wind energy RandD program, the passive solar performance assessment of an earth-sheltered house, the ARCO 1 MW photovoltaic power plant, the performance of a dendritic web photovoltaic module, second generation point focused concentrators, linear fresnel lens concentrating photovoltaic collectors, photovoltaic conversion efficiency, amorphous silicon thin film solar cells, a photovoltaic system for a shopping center, photovoltaic power generation for the utility industry, spectral solar radiation, and the analysis of insolation data.

Hayes, J.; Andrejko, D.A.

1983-01-01T23:59:59.000Z

194

Advanced energy system program. Final report, June 1986-April 1990  

SciTech Connect (OSTI)

The objectives of this program are to design, develop and demonstrate a natural-gas-fueled, highly recuperated, 50 kW Brayton-cycle cogeneration system for commercial, institutional, and multifamily residential applications. Marketing studies have shown that this Advanced Energy System (AES), with its many unique and cost-effective features, has the potential to offer significant reductions in annual electrical and thermal energy costs to the consumer. Specific advantages of the system that result in low cost of ownership are high electrical efficiency (30%, HHV), low maintenance, high reliability and long life (20 years). Significant technical features include: (1) an integral turbogenerator with shaft-speed permanent magnet generator; (2) a rotating assembly supported by compliant foil air bearings; (3) a formed-tubesheet plate/fin recuperator with 91% effectiveness; and (4) a bi-directional power conditioner to utilize the generator for system startup. The planned introduction of catalytic combustion will further enhance the economic and ecological attractiveness.

Trester, K.

1990-12-01T23:59:59.000Z

195

Spearfish High School, Sparfish, South Dakota solar energy system performance evaluation, September 1980-June 1981  

SciTech Connect (OSTI)

Spearfish High School in South Dakota contains 43,000 square feet of conditioned space. Its active solar energy system is designed to supply 57% of the space heating and 50% of the hot water demand. The system is equipped with 8034 square feet of flat plate collectors, 4017 cubic feet of rock bin sensible heat storage, and auxiliary equipment including 8 heat pumps, 6 of which are solar supplied and instrumented, air conditioning units, and natural-gas-fired boilers. Performance data are given for the system including the solar fraction, solar savings ratio, conventional fuel savings, system performance factor and solar system coefficient of performance. Insolation, solar energy utilization and operation data are also given. The performance of the collector, storage, domestic hot water and space heating subsystems, the operating energy, energy savings, and weather conditions are also evaluated. Appended are a system description, performance evaluation techniques and equations, site history, long-term weather data, sensor technology, and typical monthly data. (LEW)

Howard, B.D.

1981-01-01T23:59:59.000Z

196

Nuclear Hybrid Energy System: Molten Salt Energy Storage (Summer Report 2013)  

SciTech Connect (OSTI)

Effective energy use is a main focus and concern in the world today because of the growing demand for energy. The nuclear hybrid energy system (NHES) is a valuable technical concept that can potentially diversify and leverage existing energy technologies. This report considers a particular NHES design that combines multiple energy systems including a nuclear reactor, energy storage system (ESS), variable renewable generator (VRG), and additional process heat applications. Energy storage is an essential component of this particular NHES because its design allows the system to produce peak power while the nuclear reactor operates at constant power output. Many energy storage options are available, but this study mainly focuses on a molten salt ESS. The primary purpose of the molten salt ESS is to enable the nuclear reactor to be a purely constant heat source by acting as a heat storage component for the reactor during times of low demand, and providing additional capacity for thermo-electric power generation during times of peak electricity demand. This report will describe the rationale behind using a molten salt ESS and identify an efficient molten salt ESS configuration that may be used in load following power applications. Several criteria are considered for effective energy storage and are used to identify the most effective ESS within the NHES. Different types of energy storage are briefly described with their advantages and disadvantages. The general analysis to determine the most efficient molten salt ESS involves two parts: thermodynamic, in which energetic and exergetic efficiencies are considered; and economic. Within the molten salt ESS, the two-part analysis covers three major system elements: molten salt ESS designs (two tank direct and thermocline), the molten salt choice, and the different power cycles coupled with the molten salt ESS. Analysis models are formulated and analyzed to determine the most effective ESS. The results show that the most efficient idealized energy storage system is the two tank direct molten salt ESS with an Air Brayton combined cycle using LiF-NaF-KF as the molten salt, and the most economical is the same design with KCl MgCl2 as the molten salt. With energy production being a major worldwide industry, understanding the most efficient molten salt ESS boosts development of an effective NHES with cheap, clean, and steady power.

Piyush Sabharwall; Michael George mckellar; Su-Jong Yoon

2013-11-01T23:59:59.000Z

197

Predicting aerodynamic characteristic of typical wind turbine airfoils using CFD  

SciTech Connect (OSTI)

An investigation was conducted into the capabilities and accuracy of a representative computational fluid dynamics code to predict the flow field and aerodynamic characteristics of typical wind-turbine airfoils. Comparisons of the computed pressure and aerodynamic coefficients were made with wind tunnel data. This work highlights two areas in CFD that require further investigation and development in order to enable accurate numerical simulations of flow about current generation wind-turbine airfoils: transition prediction and turbulence modeling. The results show that the laminar-to turbulent transition point must be modeled correctly to get accurate simulations for attached flow. Calculations also show that the standard turbulence model used in most commercial CFD codes, the k-e model, is not appropriate at angles of attack with flow separation. 14 refs., 28 figs., 4 tabs.

Wolfe, W.P. [Sandia National Labs., Albuquerque, NM (United States); Ochs, S.S. [Iowa State Univ., Ames, IA (United States). Aerospace Engineering Dept.

1997-09-01T23:59:59.000Z

198

RETHINKING THE FUTURE GRID: INTEGRATED NUCLEAR-RENEWABLE ENERGY SYSTEMS  

SciTech Connect (OSTI)

The 2013 electricity generation mix in the United States consisted of ~13% renewables (hydropower, wind, solar, geothermal), 19% nuclear, 27% natural gas, and 39% coal. In the 2011 State of the Union Address, President Obama set a clean energy goal for the nation: “By 2035, 80 percent of America’s electricity will come from clean energy sources. Some folks want wind and solar. Others want nuclear, clean coal and natural gas. To meet this goal we will need them all.” The U.S. Department of Energy (DOE) Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) recognize that “all of the above” means that we are called to best utilize all available clean energy sources. To meet the stated environmental goals for electricity generation and for the broader energy sector, there is a need to transform the energy infrastructure of the U.S. and elsewhere. New energy systems must be capable of significantly reducing environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. The U.S. DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options, to meet both grid demand and thermal energy needs in the industrial sector. A concept being advanced by the DOE-NE and DOE-EERE is tighter coupling of nuclear and renewable energy sources in a manner that better optimizes energy use for the combined electricity, industrial manufacturing, and the transportation sectors. This integration concept has been referred to as a “hybrid system” that is capable of apportioning thermal and electrical energy to first meet the grid demand (with appropriate power conversion systems), then utilizing excess thermal and, in some cases, electrical energy to drive a process that results in an additional product. For the purposes of the present work, the hybrid system would integrate two or more energy resources to generate two or more products, one of which must be an energy commodity, such as electricity or transportation fuel. Subsystems would be integrated ‘‘behind’’ the electrical transmission bus and would be comprised of two or more energy conversion subsystems that have traditionally been separate or isolated. Energy flows would be dynamically apportioned as necessary to meet grid demand via a single, highly responsive connection to the grid that provides dispatchable electricity while capital-intensive generation assets operate at full capacity. Candidate region-specific hybrid energy systems selected for further study and figures of merit that will be used to assess system performance will be presented.

S.M. Bragg-Sitton; R. Boardman

2014-12-01T23:59:59.000Z

199

Future waste treatment and energy systems – examples of joint scenarios  

SciTech Connect (OSTI)

Highlights: • Approach for use of scenarios dealing with both waste management and energy issues. • Overall scenarios for the common project and sub-scenarios in parts of the project. • Combining different types of scenarios to the tools of different disciplines. • Use of explorative external scenarios based on marginals for consequential LCA. - Abstract: Development and use of scenarios for large interdisciplinary projects is a complicated task. This article provides practical examples of how it has been carried out in two projects addressing waste management and energy issues respectively. Based on experiences from the two projects, recommendations are made for an approach concerning development of scenarios in projects dealing with both waste management and energy issues. Recommendations are given to develop and use overall scenarios for the project and leave room for sub-scenarios in parts of the project. Combining different types of scenarios is recommended, too, in order to adapt to the methods and tools of different disciplines, such as developing predictive scenarios with general equilibrium tools and analysing explorative scenarios with energy system analysis tools. Furthermore, as marginals identified in differing future background systems determine the outcomes of consequential life cycle assessments (LCAs), it is considered advisable to develop and use explorative external scenarios based on possible marginals as a framework for consequential LCAs. This approach is illustrated using an on-going Danish research project.

Münster, M., E-mail: maem@dtu.dk [System Analysis Division, DTU Management Engineering, Technical University of Denmark, Frederiksborgvej 399, 4000 Roskilde (Denmark); Finnveden, G. [KTH Royal Institute of Technology, School of Architecture and the Built Environment, Department of Planning and Environment, Division of Environmental Strategies Research – fms, 100 44 Stockholm (Sweden); Wenzel, H. [Institute of Chemical Engineering, Biotechnology and Environmental Technology, University of Southern Denmark, Niels Bohrs Allé 1, 5230 Odense M (Denmark)

2013-11-15T23:59:59.000Z

200

Research for electric energy systems -- an annual report  

SciTech Connect (OSTI)

This report documents the technical progress in the two investigations which make up the project {open_quotes}Support of Research Projects for Electrical Energy Systems,{close_quotes} Department of Energy Task Order Number 137, funded by the US Department of Energy and performed by the Electricity Division of the National Institute of Standards and Technology (NIST). The first investigation is concerned with the measurement of magnetic fields in support of epidemiogical and in vitro studies of biological field effects. During 1992, the derivation of equations which predict differences between the average magnetic flux density using circular coil probes and the flux density at the center of the probe, assuming a dipole magnetic field, were completed. The information gained using these equations allows the determination of measurement uncertainty due to probe size when magnetic fields from many electrical appliances are characterized. Consultations with various state and federal organizations and the development of standards related to electric and magnetic field measurements continued. The second investigation is concerned with two different activities related to compressed-gas insulated high voltage systems: (1) the measurement of dissociative electron attachment cross sections and negative ion production in S{sub 2}F{sub 10}, S{sub 2}OF{sub 10}, and S{sub 2}O{sub 2}F{sub 10}, and (2) Monte-Carlo simulations of ac-generated partial-discharge pulses that can occur in SF{sub 6}-insulated power systems and can be sources of gas decomposition.

Anderson, W.E. [ed.

1993-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Weather forecast-based optimization of integrated energy systems.  

SciTech Connect (OSTI)

In this work, we establish an on-line optimization framework to exploit detailed weather forecast information in the operation of integrated energy systems, such as buildings and photovoltaic/wind hybrid systems. We first discuss how the use of traditional reactive operation strategies that neglect the future evolution of the ambient conditions can translate in high operating costs. To overcome this problem, we propose the use of a supervisory dynamic optimization strategy that can lead to more proactive and cost-effective operations. The strategy is based on the solution of a receding-horizon stochastic dynamic optimization problem. This permits the direct incorporation of economic objectives, statistical forecast information, and operational constraints. To obtain the weather forecast information, we employ a state-of-the-art forecasting model initialized with real meteorological data. The statistical ambient information is obtained from a set of realizations generated by the weather model executed in an operational setting. We present proof-of-concept simulation studies to demonstrate that the proposed framework can lead to significant savings (more than 18% reduction) in operating costs.

Zavala, V. M.; Constantinescu, E. M.; Krause, T.; Anitescu, M.

2009-03-01T23:59:59.000Z

202

Critical configurations of planar robot arms  

E-Print Network [OSTI]

It is known that a closed polygon P is a critical point of the oriented area function if and only if P is a cyclic polygon, that is, $P$ can be inscribed in a circle. Moreover, there is a short formula for the Morse index. Going further in this direction, we extend these results to the case of open polygonal chains, or robot arms. We introduce the notion of the oriented area for an open polygonal chain, prove that critical points are exactly the cyclic configurations with antipodal endpoints and derive a formula for the Morse index of a critical configuration.

Khimshiashvili, G; Siersma, D; Zhukova, A

2012-01-01T23:59:59.000Z

203

Configuration Interactions Constrained by Energy Density Functionals  

E-Print Network [OSTI]

A new method for constructing a Hamiltonian for configuration interaction calculations with constraints to energies of spherical configurations obtained with energy-density-functional (EDF) methods is presented. This results in a unified model that reproduced the EDF binding-energy in the limit of single-Slater determinants, but can also be used for obtaining energy spectra and correlation energies with renormalized nucleon-nucleon interactions. The three-body and/or density-dependent terms that are necessary for good nuclear saturation properties are contained in the EDF. Applications to binding energies and spectra of nuclei in the region above 208Pb are given.

B. Alex Brown; Angelo Signoracci; Morten Hjorth-Jensen

2010-09-24T23:59:59.000Z

204

Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide  

E-Print Network [OSTI]

a recent study by the Carbon Capture Project (CCP 2000), theof Fossil Hydrogen Energy Systems with Carbon Capture andThe Implications Of New Carbon Capture And Sequestration

Ogden, Joan M

2004-01-01T23:59:59.000Z

205

E-Print Network 3.0 - autonomous energy systems Sample Search...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Search Powered by Explorit Topic List Advanced Search Sample search results for: autonomous energy systems Page: << < 1 2 3 4 5 > >> 1 Autonomy Lab The Autonomy Lab builds...

206

Tss4U BV formerly Holecsol R S Renewable Energy Systems and Shell...  

Open Energy Info (EERE)

Holecsol, R&S Renewable Energy Systems and Shell Solar Energy) Place: Veldhoven, Netherlands Zip: 5503 Sector: Solar, Wind energy Product: Provides small solar and wind for...

207

DISTRIBUTED ENERGY SYSTEMS IN CALIFORNIA'S FUTURE: A PRELIMINARY REPORT, VOLUME I  

E-Print Network [OSTI]

alternative. Ocean thermal energy conversion requires anpresent designs of ocean thermal energy systems are intendedthat ocean thermal gradients will contribute energy supplies

Authors, Various

2010-01-01T23:59:59.000Z

208

V-120: EMC Smarts Network Configuration Manager Java RMI Access...  

Broader source: Energy.gov (indexed) [DOE]

0: EMC Smarts Network Configuration Manager Java RMI Access Control Flaw Lets Remote Users Gain Full Control V-120: EMC Smarts Network Configuration Manager Java RMI Access Control...

209

V-235: Cisco Mobility Services Engine Configuration Error Lets...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

5: Cisco Mobility Services Engine Configuration Error Lets Remote Users Login Anonymously V-235: Cisco Mobility Services Engine Configuration Error Lets Remote Users Login...

210

Computational Analysis of Shrouded Wind Turbine Configurations  

E-Print Network [OSTI]

Computational Analysis of Shrouded Wind Turbine Configurations Aniket C. Aranake Vinod K. Lakshminarayan Karthik Duraisamy Computational analysis of diuser-augmented turbines is performed using high-dimensional simulations of shrouded wind turbines are performed for selected shroud geometries. The results are compared

Alonso, Juan J.

211

Integrated Energy Systems (IES) for Buildings: A Market Assessment  

SciTech Connect (OSTI)

Integrated Energy Systems (IES) combine on-site power or distributed generation technologies with thermally activated technologies to provide cooling, heating, humidity control, energy storage and/or other process functions using thermal energy normally wasted in the production of electricity/power. IES produce electricity and byproduct thermal energy onsite, with the potential of converting 80 percent or more of the fuel into useable energy. IES have the potential to offer the nation the benefits of unprecedented energy efficiency gains, consumer choice and energy security. It may also dramatically reduce industrial and commercial building sector carbon and air pollutant emissions and increase source energy efficiency. Applications of distributed energy and Combined heat and power (CHP) in ''Commercial and Institutional Buildings'' have, however, been historically limited due to insufficient use of byproduct thermal energy, particularly during summer months when heating is at a minimum. In recent years, custom engineered systems have evolved incorporating potentially high-value services from Thermally Activated Technologies (TAT) like cooling and humidity control. Such TAT equipment can be integrated into a CHP system to utilize the byproduct heat output effectively to provide absorption cooling or desiccant humidity control for the building during these summer months. IES can therefore expand the potential thermal energy services and thereby extend the conventional CHP market into building sector applications that could not be economically served by CHP alone. Now more than ever, these combined cooling, heating and humidity control systems (IES) can potentially decrease carbon and air pollutant emissions, while improving source energy efficiency in the buildings sector. Even with these improvements over conventional CHP systems, IES face significant technological and economic hurdles. Of crucial importance to the success of IES is the ability to treat the heating, ventilation, air conditioning, water heating, lighting, and power systems loads as parts of an integrated system, serving the majority of these loads either directly or indirectly from the CHP output. The CHP Technology Roadmaps (Buildings and Industry) have focused research and development on a comprehensive integration approach: component integration, equipment integration, packaged and modular system development, system integration with the grid, and system integration with building and process loads. This marked change in technology research and development has led to the creation of a new acronym to better reflect the nature of development in this important area of energy efficiency: Integrated Energy Systems (IES). Throughout this report, the terms ''CHP'' and ''IES'' will sometimes be used interchangeably, with CHP generally reserved for the electricity and heat generating technology subsystem portion of an IES. The focus of this study is to examine the potential for IES in buildings when the system perspective is taken, and the IES is employed as a dynamic system, not just as conventional CHP. This effort is designed to determine market potential by analyzing IES performance on an hour-by-hour basis, examining the full range of building types, their loads and timing, and assessing how these loads can be technically and economically met by IES.

LeMar, P.

2002-10-29T23:59:59.000Z

212

Urban Wood-Based Bio-Energy Systems in Seattle  

SciTech Connect (OSTI)

Seattle Steam Company provides thermal energy service (steam) to the majority of buildings and facilities in downtown Seattle, including major hospitals (Swedish and Virginia Mason) and The Northwest (Level I) Regional Trauma Center. Seattle Steam has been heating downtown businesses for 117 years, with an average length of service to its customers of 40 years. In 2008 and 2009 Seattle Steam developed a biomass-fueled renewable energy (bio-energy) system to replace one of its gas-fired boilers that will reduce greenhouse gases, pollutants and the amount of waste sent to landfills. This work in this sub-project included several distinct tasks associated with the biomass project development as follows: a. Engineering and Architecture: Engineering focused on development of system control strategies, development of manuals for start up and commissioning. b. Training: The project developer will train its current operating staff to operate equipment and facilities. c. Flue Gas Clean-Up Equipment Concept Design: The concept development of acid gas emissions control system strategies associated with the supply wood to the project. d. Fuel Supply Management Plan: Development of plans and specifications for the supply of wood. It will include potential fuel sampling analysis and development of contracts for delivery and management of fuel suppliers and handlers. e. Integrated Fuel Management System Development: Seattle Steam requires a biomass Fuel Management System to track and manage the delivery, testing, processing and invoicing of delivered fuel. This application will be web-based and accessed from a password-protected URL, restricting data access and privileges by user-level.

Stan Gent, Seattle Steam Company

2010-10-25T23:59:59.000Z

213

Energy and Uncertainty: Models and Algorithms for Complex Energy Systems Warren B. Powell  

E-Print Network [OSTI]

, using a simple energy storage problem as a case application. Using this setting, we describe a common umbrella. The challenge of creating an efficient, sustainable energy system requires solvingEnergy and Uncertainty: Models and Algorithms for Complex Energy Systems Warren B. Powell

Powell, Warren B.

214

An Electricity Trade Model for Multiple Power Distribution Networks in Smart Energy Systems  

E-Print Network [OSTI]

An Electricity Trade Model for Multiple Power Distribution Networks in Smart Energy Systems different power networks through energy trading over a marketplace provides the chance to fully utilize--The future smart energy systems are projected to be decentralized power networks, each consisting of various

Pedram, Massoud

215

Innovative On-site Integrated Energy System Tested World Renewable Energy Congress VIII  

E-Print Network [OSTI]

and institutional settings. Recycling Waste Heat--a Key to Improving the Efficiency of Energy Supply In an eraInnovative On-site Integrated Energy System Tested World Renewable Energy Congress VIII August 29-September 3, 2004 Denver, Colorado #12;Innovative On-site Integrated Energy System Tested Jeanette B. Berry

Oak Ridge National Laboratory

216

A Framework for Multi-Level Reliability Evaluation of Electrical Energy Systems  

E-Print Network [OSTI]

A Framework for Multi-Level Reliability Evaluation of Electrical Energy Systems Alejandro D. Dom@illinois.edu Abstract--This paper proposes a framework for multi-level reliability evaluation of electrical energy intended function or in which degraded performance is not allowed. Electrical energy systems are highly

Liberzon, Daniel

217

The Challenge of Greening Energy Systems1 Alain Joseph and Larry Hughes  

E-Print Network [OSTI]

our globe. The current global energy system relies on international agreements and free. Presently, energy from renewable sources accounts for less than twenty percent of world primary energy energy-system leverage-points capable of influencing global energy trends. Important factors include

Hughes, Larry

218

A Comparison of Methods for Sizing Energy Storage Devices in Renewable Energy Systems Thomas Bailey  

E-Print Network [OSTI]

A Comparison of Methods for Sizing Energy Storage Devices in Renewable Energy Systems by Thomas of Methods for Sizing Energy Storage Devices in Renewable Energy Systems by Thomas Bailey B.Eng, University, storage technologies are proposed as a means to increase the penetration of renewable energy, to minimize

Victoria, University of

219

Modelling and control of multi-energy systems: an irreversible port-Hamiltonian approach Hector Ramireza  

E-Print Network [OSTI]

Modelling and control of multi-energy systems: an irreversible port-Hamiltonian approach Hector the formalism. Keywords: Irreversible thermodynamics, port-Hamiltonian system, control, multi-energy systems 1-mail: dsbarbar@udec.cl). Abstract In recent work a class of quasi port Hamiltonian system expressing the first

Paris-Sud XI, Université de

220

Minor in Energy Systems This minor will provide students enrolled in any of  

E-Print Network [OSTI]

but related tracks. These 4 tracks are: (1) Thermo -Mechanical Energy Systems Track; (2) Nuclear Energy Track) Nuclear Energy Track Required NUC301 Introduction to Nuclear Engineering and Reactor Safety Select eitherMinor in Energy Systems 2012-2013 This minor will provide students enrolled in any

Mohan, Chilukuri K.

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

What is the fast track to future energy systems with lower CO2 emissions?  

E-Print Network [OSTI]

What is the fast track to future energy systems with lower CO2 emissions? Main findings2 emissions? Main findings and recommendations from the Workshop on Future Energy Systems................................................21 How do we make Denmark peak before 2020 when it comes to CO2

222

The Database Driven ATLAS Trigger Configuration System  

E-Print Network [OSTI]

This contribution describes the trigger selection configuration system of the ATLAS low- and high-level trigger (HLT) and the upgrades it received in preparation for LHC Run 2. The ATLAS trigger configuration system is responsible for applying the physics selection parameters for the online data taking at both trigger levels and the proper connection of the trigger lines across those levels. Here the low-level trigger consists of the already existing central trigger (CT) and the new Level-1 Topological trigger (L1Topo), which has been added for Run 2. In detail the tasks of the configuration system during the online data taking are Application of the selection criteria, e.g. energy cuts, minimum multiplicities, trigger object correlation, at the three trigger components L1Topo, CT, and HLT On-the-fly, e.g. rate-dependent, generation and application of prescale factors to the CT and HLT to adjust the trigger rates to the data taking conditions, such as falling luminosity or rate spikes in the detector readout ...

Martyniuk, Alex; The ATLAS collaboration

2015-01-01T23:59:59.000Z

223

Applications of Optimal Building Energy System Selection and Operation  

SciTech Connect (OSTI)

Berkeley Lab has been developing the Distributed Energy Resources Customer Adoption Model (DER-CAM) for several years. Given load curves for energy services requirements in a building microgrid (u grid), fuel costs and other economic inputs, and a menu of available technologies, DER-CAM finds the optimum equipment fleet and its optimum operating schedule using a mixed integer linear programming approach. This capability is being applied using a software as a service (SaaS) model. Optimisation problems are set up on a Berkeley Lab server and clients can execute their jobs as needed, typically daily. The evolution of this approach is demonstrated by description of three ongoing projects. The first is a public access web site focused on solar photovoltaic generation and battery viability at large commercial and industrial customer sites. The second is a building CO2 emissions reduction operations problem for a University of California, Davis student dining hall for which potential investments are also considered. And the third, is both a battery selection problem and a rolling operating schedule problem for a large County Jail. Together these examples show that optimization of building u grid design and operation can be effectively achieved using SaaS.

Marnay, Chris; Stadler, Michael; Siddiqui, Afzal; DeForest, Nicholas; Donadee, Jon; Bhattacharya, Prajesh; Lai, Judy

2011-04-01T23:59:59.000Z

224

A new configurational bias scheme for sampling supramolecular structures  

E-Print Network [OSTI]

We present a new simulation scheme which allows an efficient sampling of reconfigurable supramolecular structures made of polymeric constructs functionalized by reactive binding sites. The algorithm is based on the configurational bias scheme of Siepmann and Frenkel and is powered by the possibility of changing the topology of the supramolecular network by a non-local Monte Carlo algorithm. Such plan is accomplished by a multi-scale modelling that merges coarse-grained simulations, describing the typical polymer conformations, with experimental results accounting for free energy terms involved in the reactions of the active sites. We test the new algorithm for a system of DNA coated colloids for which we compute the hybridisation free energy cost associated to the binding of tethered single stranded DNAs terminated by short sequences of complementary nucleotides. In order to demonstrate the versatility of our method, we also consider polymers functionalized by receptors that bind a surface decorated by ligands. In particular we compute the density of states of adsorbed polymers as a function of the number of ligand-receptor complexes formed. Such a quantity can be used to study the conformational properties of adsorbed polymers useful when engineering adsorption with tailored properties. We successfully compare the results with the predictions of a mean field theory. We believe that the proposed method will be a useful tool to investigate supramolecular structures resulting from direct interactions between functionalized polymers for which efficient numerical methodologies of investigation are still lacking.

Robin De Gernier; Tine Curk; Galina V. Dubacheva; Ralf P. Richter; Bortolo M. Mognetti

2014-12-09T23:59:59.000Z

225

ORGANIZATIONAL, INTERFACE AND FINANCIAL BARRIERS TO THE COMMERCIAL DEVELOPMENT OF COMMUNITY ENERGY SYSTEMS  

E-Print Network [OSTI]

MSW Electricity Plant Wind Power Cogeneration Photovoltaicspower plants running on fossil fuels have no But energy systems such as wind andplants SUMMARY OF ISSUES Issues Power quality and use of inverters Current Policv Wind

Schladale, R.

2010-01-01T23:59:59.000Z

226

Distributed Energy Systems in California's Future: A Preliminary Report Volume 2  

E-Print Network [OSTI]

Energy Systems Passive solar design of buildings Solar waterbuilding settings and architectural designs can be utilized to take advantage of passive solarsolar technologies are described as either passive-- utilizing the design of the building

Balderston, F.

2010-01-01T23:59:59.000Z

227

Observations on A Technology Roadmap for Generation IV Nuclear Energy Systems: Technical Roadmap Report  

Broader source: Energy.gov [DOE]

The development of advanced nuclear energy systems in the U.S. will depend greatly on the continued success of currently operating light water nuclear power plants and the ordering of new...

228

Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide  

E-Print Network [OSTI]

of Fossil Hydrogen Energy Systems with Carbon Capture andThe Implications Of New Carbon Capture And SequestrationW H SAMMIS WILLOW ISLAND TOTAL Carbon capture In the plant

Ogden, Joan

2004-01-01T23:59:59.000Z

229

Human Capacity Building in Energy Efficiency and Renewable Energy System Maintenance for the Yurok Tribe  

SciTech Connect (OSTI)

From July 2005 to July 2007, the Schatz Energy Research Center (SERC) assisted the Yurok Tribe in the implementation of a program designed to build the Tribe’s own capacity to improve energy efficiency and maintain and repair renewable energy systems in Tribal homes on the Yurok Reservation. Funding for this effort was provided by the U.S. Department of Energy’s Tribal Program under First Steps grant award #DE-FG36-05GO15166. The program’s centerpiece was a house-by-house needs assessment, in which Tribal staff visited and conducted energy audits at over fifty homes. The visits included assessment of household energy efficiency and condition of existing renewable energy systems. Staff also provided energy education to residents, evaluated potential sites for new household renewable energy systems, and performed minor repairs as needed on renewable energy systems.

Engel, R. A.' Zoellick, J J.

2007-07-31T23:59:59.000Z

230

Analysis of the Impact of Fuel Cell Vehicles on Energy Systems...  

Open Energy Info (EERE)

of Fuel Cell Vehicles on Energy Systems in the Transportation Sector in Japan Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Analysis of the Impact of Fuel Cell...

231

Engineering Part IB P8 Elective (2) Engineering for Renewable Energy Systems  

E-Print Network [OSTI]

(to optimise power production) gives more difficulties. Campbell chart plots the resonant frequencies1 1 Engineering Part IB P8 ­ Elective (2) Engineering for Renewable Energy Systems Wind Turbines

Talbot, James P.

232

Harnessing waste heat and reducing wasted lighting : three mechanical structures for efficient energy systems  

E-Print Network [OSTI]

This thesis presents three mechanical structures designed for efficient energy systems. In [3], Cooley presents a modification of a fluorescent lamp which allows it to detect nearby occupants and dim itself automatically. ...

Stronger, Brad A

2008-01-01T23:59:59.000Z

233

REQUEST BY INGERSOLL-RAND ENERGY SYSTEMS, INC., FOR AN ADVANCE  

Broader source: Energy.gov (indexed) [DOE]

Energy Systems' PowerWorksTM 70 kW recuperated micro-turbine engine with an absorption chiller by integrating components of an ammonia (GAX) absorber with the PowerWorksT...

234

Rigid-rotor, field-reversed configuration  

SciTech Connect (OSTI)

The radial profiles, n(r), B{sub z}(r), and E{sub r}(r), for a Flux-Coil (“inductively driven”), Field-Reversed Configuration (FC-FRC) are measured and compared to the predictions of the Rigid-Rotor Model (RRM), which is an analytic, one-dimensional, time-independent, equilibrium description for the FRC. Injectors mounted on both ends of the confinement vessel provide a pre-fill plasma. Coaxial coils mounted outside the vacuum boundaries of the annular-confinement vessel accelerate the plasma and produce the FRC. The density profile is measured by laser interferometry, the magnetic-field profile using an in-situ probe array, and the electric-field profile using an in-situ, floating-probe array. Free parameters for each profile are measured, which also allow other intrinsic-plasma parameters to be determined, using computer-fit algorithms: null radius, radial thickness, plasma temperature, rotation frequencies, the latter of which are independently verified by spectroscopy. All radial profiles agree with the RRM predictions, for the experimental configuration, parameter regime, and specified-time interval studied here.

Conti, F., E-mail: conti@df.unipi.it; Giammanco, F. [Physics Department “E. Fermi,” University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy) [Physics Department “E. Fermi,” University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Plasma Diagnostics and Technologies Ltd., Via Giuntini 63, 56023 Navacchio (PI) (Italy); Wessel, F. J.; Binderbauer, M. W.; Bolte, N.; Morehouse, M.; Qerushi, A.; Rahman, H. U.; Roche, T.; Slepchenkov, M. [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)] [Tri Alpha Energy, Inc., P.O. Box 7010, Rancho Santa Margarita, California 92688 (United States)

2014-02-15T23:59:59.000Z

235

Nuclear molecular configurations in heavy ion collisions  

SciTech Connect (OSTI)

The possibilities of nuclear molecular configurations in symmetric and asymmetric heavy ion collisions are investigated by choosing a proper parametrization for the molecule-like compound state. We treat the nucleus as a rotating liquid drop in terms of the elliptic lemniscatoid parametrization suggested by Royer and Remaud which describes all deformed shapes that occur during the process of fusion of two nuclei, starting from two touching spheres to a single one with the intermediate formation of a deep neck. Only one parameter ({ital s} for the symmetric and {ital s}{sub 1} for the conditional asymmetric case) is needed to define all the shapes encountered in the process. The shape has a neck as long as {ital s} or {ital s}{sub 1} is less than 1/ {radical}2 . In this parametrization, analytical expressions can be obtained for volume, surface, and moment of inertia while the Coulomb energy has to be evaluated numerically. The total energy of the system is calculated as a function of the parameter {ital s} or {ital s}{sub 1}, for various spins and if the stable shape corresponding to minimum energy is one with a neck, then it is concluded that the molecular configuration is possible. Our model yields results which are in good agreement with the experimental findings.

Shanmugam, G.; Padmini, M.D. (Department of Physics, Presidency College, Madras 600005, India (IN))

1989-09-01T23:59:59.000Z

236

DISTRIBUTED ENERGY SYSTEMS IN CALIFORNIA'S FUTURE: A PRELIMINARY REPORT, VOLUME I  

E-Print Network [OSTI]

Solar Typical Summer Weekly System Load Curve for the Pacific Southwest Site Capacity Locations of California

Authors, Various

2010-01-01T23:59:59.000Z

237

Simplified thermoeconomic approach to cost allocation in acombined cycle cogeneration and district energy system  

E-Print Network [OSTI]

of the requirements for the degree of MASTER OF SCIENCE May 1997 Major Subject: Mechanical Engineering SIMPLIFIED THERMOECONOMIC APPROACH TO COST ALLOCATION IN A COMBINED CYCLE COGENERATION AND DISTRICT ENERGY SYSTEM A Thesis By JASON GRAHAM FLEMING... (Member) Jerald Caton (Head of Department) May 1997 lviajor Sui&ject: lviechanical Engineering ABSTRACT Simplified Thermoeconomic Approach to Cost Allocation in a Combined Cycle Cogeneration and District Energy System. (May 1997) Jason Graham...

Fleming, Jason Graham

1997-01-01T23:59:59.000Z

238

The SUN Action database : collecting and analyzing typical actions for visual scene types  

E-Print Network [OSTI]

Recent work in human and machine vision has increasingly focused on the problem of scene recognition. Scene types are largely defined by the actions one might typically do there: an office is a place someone would typically ...

Olsson, Catherine Anne White

2013-01-01T23:59:59.000Z

239

Systems Engineering-Energy Systems Technical Electives The following courses represent some of the content currently available university-wide  

E-Print Network [OSTI]

Systems Engineering-Energy Systems Technical Electives The following courses represent some for the Systems Engineering - Energy Systems graduate programs (provided these courses have not already been used approval, any graduate level courses that are consistent with the System Engineering-Energy Systems degree

240

A COMPUTATIONAL STUDY OF SUBSONIC FLOWFIELDS OVER A MISSILE CONFIGURATION  

E-Print Network [OSTI]

A COMPUTATIONAL STUDY OF SUBSONIC FLOWFIELDS OVER A MISSILE CONFIGURATION I.H.Tuncer \\Lambda , M a missile configuration are computed at high angles of attack ranging from 15 ffi to 60 ffi using the NASA in the higher incidence range. INTRODUCTION The flow over a full missile configuration with ca­ nards and tails

Tuncer, Ismail H.

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Configurable Process Models: Experiences from a Municipality Case Study  

E-Print Network [OSTI]

Configurable Process Models: Experiences from a Municipality Case Study Florian Gottschalk1 , Teun.larosa@qut.edu.au Abstract. Configurable process models integrate different variants of a business process into a single model. Through configuration users of such models can then combine the variants to derive a process

van der Aalst, Wil

242

Generator configuration for solid oxide fuel cells  

DOE Patents [OSTI]

Disclosed are improvements in a solid oxide fuel cell generator 1 having a multiplicity of electrically connected solid oxide fuel cells 2, where a fuel gas is passed over one side of said cells and an oxygen-containing gas is passed over the other side of said cells resulting in the generation of heat and electricity. The improvements comprise arranging the cells in the configuration of a circle, a spiral, or folded rows within a cylindrical generator, and modifying the flow rate, oxygen concentration, and/or temperature of the oxygen-containing gases that flow to those cells that are at the periphery of the generator relative to those cells that are at the center of the generator. In these ways, a more uniform temperature is obtained throughout the generator.

Reichner, Philip (Plum Boro, PA)

1989-01-01T23:59:59.000Z

243

Vehicle drive module having improved cooling configuration  

DOE Patents [OSTI]

An electric vehicle drive includes a thermal support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. Power electronic circuits are thermally matched, such as between component layers and between the circuits and the support. The support may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Radosevich, Lawrence D.; Meyer, Andreas A.; Kannenberg, Daniel G.; Kaishian, Steven C.; Beihoff, Bruce C.

2007-02-13T23:59:59.000Z

244

Competing quasiparticle configurations in {sup 163}W  

SciTech Connect (OSTI)

Excited states in the neutron-deficient nuclide {sup 163}W were investigated using the {sup 106}Cd({sup 60}Ni,2pn){sup 163}W reaction at a beam energy of 270 MeV. The level scheme for {sup 163}W was extended significantly with the observation of five new band structures. The yrast band based on a 13/2{sup +} isomeric state is extended up to (57/2{sup +}). Two band structures were established on the 7/2{sup -} ground state. Quasiparticle configuration assignments for the new band structures were made on the basis of cranked Woods-Saxon shell-model calculations. The results reported in this article suggest that the negative-parity nu(f{sub 7/2},h{sub 9/2}) orbitals are responsible for the first rotational alignment in the yrast band.

Thomson, J.; Joss, D. T.; Paul, E. S.; Bianco, L.; Darby, I. G.; Grahn, T.; Page, R. D.; Pakarinen, J.; Sapple, P. J. [Oliver Lodge Laboratory, University of Liverpool, Liverpool, L69 7ZE (United Kingdom); Scholey, C.; Eeckhaudt, S.; Greenlees, P. T.; Jones, P.; Julin, R.; Juutinen, S.; Ketelhut, S.; Leino, M.; Nyman, M.; Rahkila, P.; Saren, J. [Department of Physics, University of Jyvaeskylae, FI-40014 Jyvaeskylae (Finland)

2010-01-15T23:59:59.000Z

245

Method and apparatus configured for identification of a material  

DOE Patents [OSTI]

The present invention includes an apparatus configured for identification of a material, and methods of identifying a material. One embodiment of the invention provides an apparatus including a first region configured to receive a first sample, the first region being configured to output a first spectrum corresponding to the first sample and responsive to exposure of the first sample to radiation; a modulator configured to modulate the first spectrum according to a first frequency; a second region configured to receive a second sample, the second region being configured to output a second spectrum corresponding to the second sample and responsive to exposure of the second sample to the modulated first spectrum; and a detector configured to detect the second spectrum having a second frequency greater than the first frequency.

Slater, John M. (Idaho Falls, ID); Crawford, Thomas M. (Idaho Falls, ID)

2000-01-01T23:59:59.000Z

246

A Single Tower Configuration of the Modular Gamma Box Counter System - 13392  

SciTech Connect (OSTI)

Canberra's Standard Gamma Box Counter System is designed to perform accurate quantitative assays of gamma emitting nuclides for a wide range of large containers including B-25 crates and ISO shipping containers. Using a modular building-block approach, the system offers tremendous flexibility for a variety of measurement situations with wide ranges of sample activities and throughput requirements, as well as the opportunity to modify the configuration for other applications at a later date. The typical configuration consists of two opposing towers each equipped with two high purity germanium detectors, and an automated container trolley. This paper presents a modified configuration, consisting of a single tower placed inside a measurement trailer with three detector assemblies, allowing for additional vertical segmentation as well as a viewing a container outside the trailer through the trailer wall. An automatic liquid nitrogen fill system is supplied for each of the detectors. The use of a forklift to move the container for horizontal segmentation is accommodated by creating an additional operational and calibration set-up in the NDA 2000 software to allow for the operator to rotate the container and assay the opposite side, achieving the same sensitivity as a comparable two-tower system. This Segmented Gamma Box Counter System retains the core technologies and design features of the standard configuration. The detector assemblies are shielded to minimize interference from environmental and plant background, and are collimated to provide segmentation of the container. The assembly positions can also be modified in height and distance from the container. The ISOCS calibration software provides for a flexible approach to providing the calibrations for a variety of measurement geometries. The NDA 2000 software provides seamless operation with the current configuration, handling the data acquisition and analysis. In this paper, an overview of this system is discussed, along with the measured performance results, calibration methodology and verification, and minimum detectable activity levels. (authors)

Morris, K.; Nakazawa, D.; Francalangia, J.; Gonzalez, H. [Canberra Industries Inc., 800 Research Parkway, Meriden, CT, 06450 (United States)] [Canberra Industries Inc., 800 Research Parkway, Meriden, CT, 06450 (United States)

2013-07-01T23:59:59.000Z

247

Chapter 2: Sustainable and Unsustainable Developments in the U.S. Energy System  

SciTech Connect (OSTI)

Over the course of the nineteenth and twentieth centuries, the United States developed a wealthy society on the basis of cheap and abundant fossil fuel energy. As fossil fuels have become ecologically and economically expensive in the twenty-first century, America has shown mixed progress in transitioning to a more sustainable energy system. From 2000 to 2006, energy and carbon intensity of GDP continued favorable long-term trends of decline. Energy end-use efficiency also continued to improve; for example, per-capita electricity use was 12.76 MWh per person per year in 2000 and again in 2006, despite 16 percent GDP growth over that period. Environmental costs of U.S. energy production and consumption have also been reduced, as illustrated in air quality improvements. However, increased fossil fuel consumption, stagnant efficiency standards, and expanding corn-based ethanol production have moved the energy system in the opposite direction, toward a less sustainable energy system. This chapter reviews energy system developments between 2000 and 2006 and presents policy recommendations to move the United States toward a more sustainable energy system.

Levine, Mark; Levine, Mark D.; Aden, Nathaniel T.

2008-05-01T23:59:59.000Z

248

Blank fire configuration for automatic pistol  

DOE Patents [OSTI]

A pistol configured to fire blank cartridges includes a modified barrel with a breech portion connected to an aligned inner sleeve. Around the inner sleeve, there is disposed an outer sleeve having a vent therein through which the cartridge discharges. The breech portion is connected to a barrel anchor to move backward in a slight arc when the pistol is fired. A spring retention rod projects from the barrel anchor and receives a shortened recoil spring therearound which recoil spring has one end abutting a stop on the barrel anchor and the other end in abutment with the end of a spring retaining cup. The spring retaining cup is engaged by a flange projecting from a slide so that when the pistol is fired, the slide moves rearwardly against the compression of the spring to eject the spent cartridge and then moves forwardly under the urging of the spring to load a fresh cartridge into the breech portion. The spring then returns all of the slidable elements to their initial position so that the pistol may again be fired.

Teague, Tommy L. (Albuquerque, NM)

1990-01-01T23:59:59.000Z

249

SAPHIRE 8 Software Configuration Management Plan  

SciTech Connect (OSTI)

The INL software developers use version control for both the formally released SAPHIRE versions, as well as for source code. For each formal release of the software, the developers perform an acceptance test: the software must pass a suite of automated tests prior to official release. Each official release of SAPHIRE is assigned a unique version identifier. The release is bundled into a standard installation package for easy and consistent set-up by individual users. Included in the release is a list of bug fixes and new features for the current release, as well as a history of those items for past releases. Each formal release of SAPHIRE will have passed an acceptance test. In addition to assignment of a unique version identifier for an official software release, each source code file is kept in a controlled library. Source code is a collection of all the computer instructions written by developers to create the finished product. The library is kept on a server, where back-ups are regularly made. This document describes the configuration management approach used as part of the SAPHIRE development.

Curtis Smith

2010-01-01T23:59:59.000Z

250

Comparative analysis of net energy balance for satellite power systems (SPS) and other energy systems  

SciTech Connect (OSTI)

The net energy balance of seven electric energy systems is assessed: two coal-based, one nuclear, two terrestrial solar, and two solar power satellites, with principal emphasis on the latter two systems. Solar energy systems require much less operating energy per unit of electrical output. However, on the basis of the analysis used here, coal and nuclear systems are two to five times more efficient at extracting useful energy from the primary resource base than are the solar energy systems. The payback period for all systems is less than 1.5 years, except for the terrestrial photovoltaic (19.8 yr) and the solar power satellite system (6.4 yr), both of which rely on energy-intensive silicon cells.

Cirillo, R.R.; Cho, B.S.; Monarch, M.R.; Levine, E.P.

1980-04-01T23:59:59.000Z

251

A Technology Roadmap for Generation IV Nuclear Energy Systems Executive Summary  

SciTech Connect (OSTI)

To meet future energy needs, ten countries--Argentina, Brazil, Canada, France, Japan, the Republic of Korea, the Republic of South Africa, Switzerland, the United Kingdom, and the United States--have agreed on a framework for international cooperation in research for an advanced generation of nuclear energy systems, known as Generation IV. These ten countries have joined together to form the Generation IV International Forum (GIF) to develop future-generation nuclear energy systems that can be licensed, constructed, and operated in a manner that will provide competitively priced and reliable energy products while satisfactorily addressing nuclear safety, waste, proliferation, and public perception concerns. The objective for Generation IV nuclear energy systems is to be available for international deployment before the year 2030, when many of the world's currently operating nuclear power plants will be at or near the end of their operating licenses.

None

2003-03-01T23:59:59.000Z

252

Gauge Configurations for Lattice QCD from The Gauge Connection  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

The Gauge Connection is an experimental archive for lattice QCD and a repository of gauge configurations made freely available to the community. Contributors to the archive include the Columbia QCDSP collaboration, the MILC collaboration, and others. Configurations are stored in QCD archive format, consisting of an ASCII header which defines various parameters, followed by binary data. NERSC has also provided some utilities and examples that will aid users in handling the data. Users may browse the archive, but are required to register for a password in order to download data. Contents of the archive are organized under four broad headings: Quenched (more than 1200 configurations); Dynamical, Zero Temperature (more than 300 configurations); MILC Improved Staggered Asqtad Lattices (more than 7000 configurations); and Dynamical, Finite Temperature (more than 1200 configurations)

253

Concealed configuration mixing and shape coexistence in the platinum nuclei  

SciTech Connect (OSTI)

The role of configuration mixing in the Pt region is investigated. The nature of the ground state changes smoothly, being spherical around mass A{approx} 174 and A{approx} 192 and deformed around the mid-shell N= 104 region. Interacting Boson Model with configuration mixing calculations are presented for deformations and isotope shifts. The assumption of the existence of two configurations with very different deformation provides a simple framework to explain the observed isotope shifts systematics.

Garcia-Ramos, J. E.; Hellemans, V.; Heyde, K. [Departamento de Fisica Aplicada, Universidad de Huelva, 21071 Huelva (Spain); Universite Libre de Bruxelles, Physique Nucleaire Theorique et Physique Mathematique, CP229, B-1050 Brussels (Belgium); Department of Physics and Astronomy, Ghent University, Proeftuinstraat 86, B-9000 Gent (Belgium)

2012-10-20T23:59:59.000Z

254

Vertical Electrical Sounding Configurations At Mt Princeton Hot...  

Open Energy Info (EERE)

navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Vertical Electrical Sounding Configurations At Mt Princeton Hot Springs Geothermal Area (Zohdy, Et Al.,...

255

applying product configuration: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

recurrence satisfied by the Stirling numbers of the second kind. Abrams, Aaron; Hower, Valerie 2010-01-01 167 Equilibrium Configurations of Cantilever under Terminal Loads...

256

axicell configuration final: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

recurrence satisfied by the Stirling numbers of the second kind. Abrams, Aaron; Hower, Valerie 2010-01-01 68 Integrated coverage and connectivity configuration in wireless...

257

Configuring Workstations for use with the PARS II System  

Broader source: Energy.gov [DOE]

This file provides the users with instructions on how to configure the workstations to work with the Department's Project Assessment Reporting System (PARS II)

258

absolute configurational entropies: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

entropy -- which we evaluate with two different methods -- we show that a configurational entropy maximum is observed at a temperature close to that of the diffusivity maximum. Our...

259

Renewable Energy System Test and Support Laboratory , T L Pryor2  

E-Print Network [OSTI]

ACRELab Renewable Energy System Test and Support Laboratory T Spooner1 , T L Pryor2 , N Wilmot3 , G for Renewable Energy AUSTRALIA Abstract ACRELab is a new testing laboratory for Renewable Energy (RE) systems. It is located at the headquarters of the Australian CRC for Renewable Energy (ACRE) on the Murdoch University

260

Smart Residential Energy Systems How Pervasive Com-puting can be used to conserve energy  

E-Print Network [OSTI]

In order to be effective, residential energy feedback and control systems have to feature a low usageSmart Residential Energy Systems ­ How Pervasive Com- puting can be used to conserve energy Markus accounts for about 40% of total energy consumption [1]. The residential sector alone has seen a rise

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Control of Airborne Wind Energy Systems Based on Nonlinear Model Predictive Control & Moving Horizon Estimation  

E-Print Network [OSTI]

tethered to the ground at a high velocity across the wind direction. Power can be generated by a, the first option is considered. Because it involves a much lighter structure, a major advantage of powerControl of Airborne Wind Energy Systems Based on Nonlinear Model Predictive Control & Moving

262

A Hybrid Energy System Using Cascaded H-bridge Converter , Zhong Du2  

E-Print Network [OSTI]

schemes were developed to extract maximum wind power and charge/discharge the battery with fast dynamics proposes a hybrid energy system to integrate the variable-speed wind turbine, fuel cell, and battery using a cascaded H-bridge converter. One of the advantages of this topology is that it still can obtain

Tolbert, Leon M.

263

Ris Energy Report 4 International trends and scenarios for future energy systems Introduction  

E-Print Network [OSTI]

Risø Energy Report 4 International trends and scenarios for future energy systems 3 Introduction In evaluations of long term energy forecasts made in the past the conclusion often is that a large number on internationally recognised scientific material". One key observation in a recent evaluation of long term energy

264

Lockheed Martin Energy Systems, Inc., Groundwater Program Office. Annual report for fiscal year 1994  

SciTech Connect (OSTI)

This edition of the Lockheed Martin Energy Systems, Inc., (Energy Systems) Groundwater Program Annual Report summarizes the work carried out by the Energy Systems Groundwater Program Office (GWPO) for fiscal year (FY) 1994. The GWPO is responsible for coordination and oversight for all components of the groundwater programs at the three Oak Ridge facilities [Oak Ridge National Laboratory (ORNL), the Oak Ridge Y-12 Plant, and the Oak Ridge K-25 Site], as well as the Paducah and Portsmouth Gaseous Diffusion Plants (PGDP and PORTS, respectively.) This report describes the administrative framework of the GWPO including staffing, organization, and funding sources. In addition, summaries are provided of activities involving the Technical Support staff at the five facilities. Finally, the results of basic investigations designed to improve our understanding of the major processes governing groundwater flow and contaminant migration on the Oak Ridge Reservation (ORR) are reported. These investigations are conducted as part of the Oak Ridge Reservation Hydrology and Geology Studies (ORRHAGS) program. The relevance of these studies to the overall remediation responsibilities of Energy Systems is discussed.

NONE

1994-09-30T23:59:59.000Z

265

Importance of bioenergy markets for the development of the global energy system  

E-Print Network [OSTI]

Importance of bioenergy markets for the development of the global energy system Nicklas Forsell, Bioenergy, TIAM-FR model, bioenergy markets, climate policies Overview Fossil fuels such as oil, coal international bioenergy markets are still in their infancy, international trade of biofuels, wood pellets

Paris-Sud XI, Université de

266

Research in Energy Systems Integration at the National Renewable Energy Laboratory  

E-Print Network [OSTI]

, renewable energy, and distributed energy resources. These efforts have started new industriesResearch in Energy Systems Integration at the National Renewable Energy Laboratory Speaker: Dr Renewable Energy Laboratory in Golden, CO, where he leads a group that performs research in distributed

267

Electric vehicles and renewable energy in the transport sector energy system  

E-Print Network [OSTI]

energy resources, such as wind power. Economic aspects for electric vehicles interactingElectric vehicles and renewable energy in the transport sector ­ energy system consequences Main focus: Battery electric vehicles and hydrogen based fuel cell vehicles Lars Henrik Nielsen and Kaj

268

Preparing the U.S. Foundation for Future Electric Energy Systems  

E-Print Network [OSTI]

Preparing the U.S. Foundation for Future Electric Energy Systems: A Strong Power and Energy large-scale penetration of Renewable and Alternative Energy technologies Maintain U.S. Electric Power Vehicles to reduce oil consumption, reduce carbon emissions, and store energy for support of the electric

269

Biomass energy systems program summary. Information current as of September 30, 1979  

SciTech Connect (OSTI)

This program summary describes each of the DOE's Biomass Energy System's projects funded or in existence during fiscal year 1979 and reflects their status as of September 30, 1979. The summary provides an overview of the ongoing research, development, and demonstration efforts of the preceding fiscal year as well. (DMC)

Not Available

1980-10-01T23:59:59.000Z

270

Modern Wood Energy Systems and Markets 16-17 September 2008, Timisoara, Romania  

E-Print Network [OSTI]

Energy Market Developments Ed Pepke Forest Products Marketing Specialist UNECE/FAO Timber Section, Geneva. Overview of forest products market developments II. Market drivers III. Policy drivers IV. Wood energy for the Protection of Forests in Europe, November 2007 #12;Modern Wood Energy Systems and Markets 16-17 September

271

Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide  

SciTech Connect (OSTI)

In this final progress report, we describe research results from Phase I of a technical/economic study of fossil hydrogen energy systems with CO{sub 2} sequestration. This work was performed under NETL Award No. DE-FC26-02NT41623, during the period September 2002 through August 2005 The primary objective of the study is to better understand system design issues and economics for a large-scale fossil energy system co-producing H{sub 2} and electricity with CO{sub 2} sequestration. This is accomplished by developing analytic and simulation methods for studying the entire system in an integrated way. We examine the relationships among the different parts of a hydrogen energy system, and identify which variables are the most important in determining both the disposal cost of CO{sub 2} and the delivered cost of H{sub 2}. A second objective is to examine possible transition strategies from today's energy system toward one based on fossil-derived H{sub 2} and electricity with CO{sub 2} sequestration. We carried out a geographically specific case study of development of a fossil H{sub 2} system with CO{sub 2} sequestration, for the Midwestern United States, where there is presently substantial coal conversion capacity in place, coal resources are plentiful and potential sequestration sites in deep saline aquifers are widespread.

Joan M. Ogden

2005-11-29T23:59:59.000Z

272

Program, Course or Contract Title: Energy Systems & Climate Change Quarter and Academic Year: Fall 2009  

E-Print Network [OSTI]

workshops with hands-on statistical methods for data presentation. Our primary texts for energy and climate Initiative. Our primary texts for policy were Global Environmental Governance by Speth & Haas, Who OwnsProgram, Course or Contract Title: Energy Systems & Climate Change Quarter and Academic Year: Fall

273

Basic Research Needs for Geosciences: Facilitating 21st Century Energy Systems  

SciTech Connect (OSTI)

To identify research areas in geosciences, such as behavior of multiphase fluid-solid systems on a variety of scales, chemical migration processes in geologic media, characterization of geologic systems, and modeling and simulation of geologic systems, needed for improved energy systems.

DePaolo, D. J.; Orr, F. M.; Benson, S. M.; Celia, M.; Felmy, A.; Nagy, K. L.; Fogg, G. E.; Snieder, R.; Davis, J.; Pruess, K.; Friedmann, J.; Peters, M.; Woodward, N. B.; Dobson, P.; Talamini, K.; Saarni, M.

2007-06-01T23:59:59.000Z

274

Industrial Research Chair in Energy Systems for Smart Cities SIMON FRASER UNIVERSITY, CANADA  

E-Print Network [OSTI]

Industrial Research Chair in Energy Systems for Smart Cities SIMON FRASER UNIVERSITY, CANADA energy, as well as any other renewable energy sources and related technology in alignment The Faculty of Applied Sciences at Simon Fraser University, British Columbia, Canada, invites applications

275

ELECTRICAL ENGINEERING 4PL4 ENERGY SYSTEM AND MANAGEMENT FALL 2010  

E-Print Network [OSTI]

ELECTRICAL ENGINEERING 4PL4 ENERGY SYSTEM AND MANAGEMENT FALL 2010 Course Outline (dated Aug 23 OR ORAL). COURSE LOADING: · Lectures: 3 hours/week · Study time: 6 hours/week · Laboratory (4; systemwide energy flow and control; modeling and simulation; economics and management; fault prediction

Haykin, Simon

276

Ris Energy Report 8 The intelligent energy system infrastructure for the future  

E-Print Network [OSTI]

Risø Energy Report 8 The intelligent energy system infrastructure for the future Dansk oversættelse Sønderberg Petersen #12;Risø Energy Report 5 Renewable energy for power and transport Den globale Report 5, som sætter fokus på status og tendenser inden for vedvarende energi. Rapporten giver et

277

A Note on System Integration to Support a Renewable Energy System  

E-Print Network [OSTI]

and a simultaneous increase in coal generation. The cost of solar power has fallen to competitive levels much more countries have grown phenomenally, CO2 emissions have hardly decreased due to lower coal prices generation, storage, demand response and interconnection. The energy system, however, is clearly more than

278

Sensorless Adaptive Output Feedback Control of Wind Energy Systems with PMS Generators  

E-Print Network [OSTI]

1 Sensorless Adaptive Output Feedback Control of Wind Energy Systems with PMS Generators A. El the problem of controlling wind energy conversion (WEC) systems involving permanent magnet synchronous is to maximize wind energy extraction which cannot be achieved without letting the wind turbine rotor operate

Boyer, Edmond

279

INVENTORY OF SOLAR RADIATION/SOLAR ENERGY SYSTEMS ESTIMATORS, MODELS, SITE-SPECIFIC DATA, AND PUBLICATIONS  

E-Print Network [OSTI]

INVENTORY OF SOLAR RADIATION/SOLAR ENERGY SYSTEMS ESTIMATORS, MODELS, SITE-SPECIFIC DATA, and Buildings Systems Integration Center National Renewable Energy Laboratory 8 July 2009 SOLAR SYSTEM POTENTIAL/calculators/PVWATTS/version1/ http://rredc.nrel.gov/solar/calculators/PVWATTS/version2/ Estimates the electrical energy

280

CryPLH: Protecting smart energy systems from targeted attacks with a PLC honeypot  

E-Print Network [OSTI]

CryPLH: Protecting smart energy systems from targeted attacks with a PLC honeypot D´aniel Istv of control system elements, such as PLCs. In this paper, we design and implement the Crysys PLC honeypot (CryPLH) system to detect targeted attacks against industrial control systems. This PLC honeypot can

Bencsáth, Boldizsár

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Preliminary Results of a RANS Simulation for a Floating Point Absorber Wave Energy System Under Extreme Wave Conditions  

SciTech Connect (OSTI)

This paper presents the results of a preliminary study on the hydrodynamics of a moored floating-point absorber (FPA) wave energy system under extreme wave conditions.

Yu, Y.; Li, Y.

2011-10-01T23:59:59.000Z

282

Laser Inertial Fusion-based Energy: Neutronic Design Aspects of a Hybrid Fusion-Fission Nuclear Energy System  

E-Print Network [OSTI]

Example of NIF fusion target hohlraum with multiple beamsimilar to those used on NIF. . . . . Overview of LFFHNES Nuclear Energy System NIF National Ignition Facility ODS

Kramer, Kevin James

2010-01-01T23:59:59.000Z

283

ARM: Surface Radiation Measurement Quality Control testing, including climatologically configurable limits  

DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

Surface Radiation Measurement Quality Control testing, including climatologically configurable limits

Hodges, Gary; Stoffel, Tom; Kutchenreiter, Mark; Kay, Bev; Habte, Aron; Ritsche, Michael; Morris, Victor; Anderberg, Mary

284

Conceptual Design of Optimized Fossil Energy Systems with Capture and Sequestration of Carbon Dioxide  

SciTech Connect (OSTI)

In this final report, we describe research results from Phase 2 of a technical/economic study of fossil hydrogen energy systems with carbon dioxide (CO{sub 2}) capture and storage (CCS). CO{sub 2} capture and storage, or alternatively, CO{sub 2} capture and sequestration, involves capturing CO{sub 2} from large point sources and then injecting it into deep underground reservoirs for long-term storage. By preventing CO{sub 2} emissions into the atmosphere, this technology has significant potential to reduce greenhouse gas (GHG) emissions from fossil-based facilities in the power and industrial sectors. Furthermore, the application of CCS to power plants and hydrogen production facilities can reduce CO{sub 2} emissions associated with electric vehicles (EVs) and hydrogen fuel cell vehicles (HFCVs) and, thus, can also improve GHG emissions in the transportation sector. This research specifically examines strategies for transitioning to large-scale coal-derived energy systems with CCS for both hydrogen fuel production and electricity generation. A particular emphasis is on the development of spatially-explicit modeling tools for examining how these energy systems might develop in real geographic regions. We employ an integrated modeling approach that addresses all infrastructure components involved in the transition to these energy systems. The overall objective is to better understand the system design issues and economics associated with the widespread deployment of hydrogen and CCS infrastructure in real regions. Specific objectives of this research are to: Develop improved techno-economic models for all components required for the deployment of both hydrogen and CCS infrastructure, Develop novel modeling methods that combine detailed spatial data with optimization tools to explore spatially-explicit transition strategies, Conduct regional case studies to explore how these energy systems might develop in different regions of the United States, and Examine how the design and cost of coal-based H{sub 2} and CCS infrastructure depend on geography and location.

Nils Johnson; Joan Ogden

2010-12-31T23:59:59.000Z

285

EXTREMAL CONFIGURATIONS OF ROBOT ARMS IN THREE DIMENSIONS  

E-Print Network [OSTI]

EXTREMAL CONFIGURATIONS OF ROBOT ARMS IN THREE DIMENSIONS DIRK SIERSMA Abstract. We define a volume function for a robot arm in R3 and give geometric conditions for its critical points. 1. Introduction configurations of planar polygonal linkages and open robot arms considered as the critical points of the oriented

Siersma, Dirk

286

A Case Study of a product software vendor's Customer Configuration  

E-Print Network [OSTI]

A Case Study of a product software vendor's Customer Configuration Updating Process: GX Creative Case Study of a product software vendor's Customer Configuration Updating Process: GX Creative Online the results of a case study of GX creative online development, a Dutch product software vendor, into its

Utrecht, Universiteit

287

Magnetic reconnection configurations and particle acceleration in solar flares  

E-Print Network [OSTI]

types of solar flares. Upper panel: two-ribbon flares; Lower panel: compact flares. The color shows space under different magnetic configurations. Key words: solar flares, magnetic reconnection, particleMagnetic reconnection configurations and particle acceleration in solar flares P. F. Chen, W. J

Chen, P. F.

288

Verification of Network Management System Configurations David L. Cohrs  

E-Print Network [OSTI]

, with the use of simple, ad hoc tools. However in a large network, managing the net- work management system the amount of sharing and coordination possible in configuring the net- work management system. EachVerification of Network Management System Configurations David L. Cohrs (608) 262-6617 dave

Miller, Barton P.

289

NAVIERSTOKES ANALYSIS OF SUBSONIC FLOWFIELDS OVER A MISSILE CONFIGURATION  

E-Print Network [OSTI]

NAVIER­STOKES ANALYSIS OF SUBSONIC FLOWFIELDS OVER A MISSILE CONFIGURATION Ismail H.Tuncer \\Lambda Canard deflection angle INTRODUCTION The flow over a full missile configuration with ca­ nards and tails on the aerodynamic characteristics of canard­controlled missiles at high angles of attack is of considerable interest

Tuncer, Ismail H.

290

Brain Bases of Reading Fluency in Typical Reading and Impaired Fluency in Dyslexia  

E-Print Network [OSTI]

Although the neural systems supporting single word reading are well studied, there are limited direct comparisons between typical and dyslexic readers of the neural correlates of reading fluency. Reading fluency deficits ...

Christodoulou, Joanna

291

E-Print Network 3.0 - andisol typic hapludand Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

considerable pressure difference (typically overcontent... :427-436. Sperry, J.S., V. Stiller, and U.G. Hacke. 2002b. Soil water uptake andisolated vascular bundles and whole...

292

POST-KYOTO POLICY IMPLICATIONS ON THE ENERGY SYSTEM: A TIAM-FR LONG-TERM PLANNING EXERCISE  

E-Print Network [OSTI]

marginal costs, the primary energy consumption and the energy mix. This paper compares global efforts of CO. Keywords CO2 mitigation targets, global energy system, long-term modelling Acknowledgement This researchPOST-KYOTO POLICY IMPLICATIONS ON THE ENERGY SYSTEM: A TIAM-FR LONG-TERM PLANNING EXERCISE Sandrine

Paris-Sud XI, Université de

293

The impact of sheared vs. sawn timber in the typical southern pine plywood mill  

E-Print Network [OSTI]

THE IMPACT OF SHEARED VS' SAWN TIMBER IN THE TYPICAL SOUTHERN PINE PLYWOOD MILL A Thesis by RUSSELL GARRETT SWINNEY Submitted to the Office of Graduate Studies of Texas ASM University in partial fulfillment of the requirements... for the degree of MASTER OF SCIENCE December 1989 Major Subject: Forestry THE IMPACT OP SHEARED VS. SAWN T1MBER IN THE TYPICAL SOUTHERN PINE PLYWOOD MILI A Thesis by RUSSELL GARRETT SWINNEY Approved as to style and content by: Jease ( hair of mmi Jy...

Swinney, Russell Garrett

1989-01-01T23:59:59.000Z

294

Community energy systems and the law of public utilities. Volume 20. Louisiana  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Louisiana governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities--Volume One: An overview. This report also contains a summary of a strategy described in Volume One--An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enchance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

295

Community Energy Systems and the Law of Public Utilities. Volume Twenty-four. Michigan  

SciTech Connect (OSTI)

A detailed description of the laws and programs of the State of Michigan governing the regulation of public energy facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

296

Martin Marietta Energy Systems Environmental Management Plan, FY 1985-1989  

SciTech Connect (OSTI)

This plan contains the most recent revisions (as of April 1, 1985) identifying and resolving environmental problems during the next five years at the four installations managed for DOE by Martin Marietta Energy Systems, Inc. (Energy Systems). These installations are Oak Ridge National Laboratory (ORNL), Oak Ridge Gaseous Diffusion Plant (ORGDP), Oak Ridge Y-12 Plant (Y-12), and Paducah Gaseous Diffusion Plant (PGDP). The report is not an exhaustive catalogue of environmental programs for which funds will be or have been requested. The thrust is to categorize the environmental challenges by the nature of the challenge. The challenges are identified by categories: (1) radioactive waste, (2) hazardous waste, (3) co-contaminated waste (hazardous and radioactive contaminated), (4) conventional waste, (5) monitoring, and (6) remedial actions and decommissioning.

Furth, W.F.; Cowser, K.E.; Jones, C.G.; Mitchell, M.E.; Perry, T.P.A.; Stair, C.L.; Stinton, L.H.

1985-05-01T23:59:59.000Z

297

Energy Systems Integration Facility (ESIF) External Stakeholders Workshop: Workshop Proceedings, 9 October 2008, Golden, Colorado  

SciTech Connect (OSTI)

On October 9, 2008, NREL hosted a workshop to provide an opportunity for external stakeholders to offer insights and recommendations on the design and functionality of DOE's planned Energy Systems Infrastructure Facility (ESIF). The goal was to ensure that the planning for the ESIF effectively addresses the most critical barriers to large-scale energy efficiency (EE) and renewable energy (RE) deployment. This technical report documents the ESIF workshop proceedings.

Komomua, C.; Kroposki, B.; Mooney, D.; Stoffel, T.; Parsons, B.; Hammond, S.; Kutscher, C.; Remick, R.; Sverdrup, G.; Hawsey, R.; Pacheco, M.

2009-01-01T23:59:59.000Z

298

Case study of total energy system, Sher-Den Mall, Sherman, Texas  

SciTech Connect (OSTI)

The Sher-Den Mall shopping center receives all of its electricity and heating and cooling energy from a total energy plant located within the shopping center proper. Four engine-generator units are fueled primarily by natural gas, with some fuel oil use. The following are presented: initial corporate planning, investigation, and feasibility studies; a description of the total energy system; capital costs; plant operations, and revenue structure. Tables, figures, exhibits, and equipment specification lists are presented. (MHR)

Myrtetus, G.B.; Levey, M.D.

1980-12-01T23:59:59.000Z

299

Small Business Innovation Research (SBIR) Award Success Story: Proton Energy Systems  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage » SearchEnergyDepartment ofCombustuionDOEGovernmentProton Energy Systems Proton

300

Laser Intertial Fusion Energy: Neutronic Design Aspects of a Hybrid Fusion-Fission Nuclear Energy System  

SciTech Connect (OSTI)

This study investigates the neutronics design aspects of a hybrid fusion-fission energy system called the Laser Fusion-Fission Hybrid (LFFH). A LFFH combines current Laser Inertial Confinement fusion technology with that of advanced fission reactor technology to produce a system that eliminates many of the negative aspects of pure fusion or pure fission systems. When examining the LFFH energy mission, a significant portion of the United States and world energy production could be supplied by LFFH plants. The LFFH engine described utilizes a central fusion chamber surrounded by multiple layers of multiplying and moderating media. These layers, or blankets, include coolant plenums, a beryllium (Be) multiplier layer, a fertile fission blanket and a graphite-pebble reflector. Each layer is separated by perforated oxide dispersion strengthened (ODS) ferritic steel walls. The central fusion chamber is surrounded by an ODS ferritic steel first wall. The first wall is coated with 250-500 {micro}m of tungsten to mitigate x-ray damage. The first wall is cooled by Li{sub 17}Pb{sub 83} eutectic, chosen for its neutron multiplication and good heat transfer properties. The {sub 17}Pb{sub 83} flows in a jacket around the first wall to an extraction plenum. The main coolant injection plenum is immediately behind the Li{sub 17}Pb{sub 83}, separated from the Li{sub 17}Pb{sub 83} by a solid ODS wall. This main system coolant is the molten salt flibe (2LiF-BeF{sub 2}), chosen for beneficial neutronics and heat transfer properties. The use of flibe enables both fusion fuel production (tritium) and neutron moderation and multiplication for the fission blanket. A Be pebble (1 cm diameter) multiplier layer surrounds the coolant injection plenum and the coolant flows radially through perforated walls across the bed. Outside the Be layer, a fission fuel layer comprised of depleted uranium contained in Tristructural-isotropic (TRISO) fuel particles having a packing fraction of 20% in 2 cm diameter fuel pebbles. The fission blanket is cooled by the same radial flibe flow that travels through perforated ODS walls to the reflector blanket. This reflector blanket is 75 cm thick comprised of 2 cm diameter graphite pebbles cooled by flibe. The flibe extraction plenum surrounds the reflector bed. Detailed neutronics designs studies are performed to arrive at the described design. The LFFH engine thermal power is controlled using a technique of adjusting the {sup 6}Li/{sup 7}Li enrichment in the primary and secondary coolants. The enrichment adjusts system thermal power in the design by increasing tritium production while reducing fission. To perform the simulations and design of the LFFH engine, a new software program named LFFH Nuclear Control (LNC) was developed in C++ to extend the functionality of existing neutron transport and depletion software programs. Neutron transport calculations are performed with MCNP5. Depletion calculations are performed using Monteburns 2.0, which utilizes ORIGEN 2.0 and MCNP5 to perform a burnup calculation. LNC supports many design parameters and is capable of performing a full 3D system simulation from initial startup to full burnup. It is able to iteratively search for coolant {sup 6}Li enrichments and resulting material compositions that meet user defined performance criteria. LNC is utilized throughout this study for time dependent simulation of the LFFH engine. Two additional methods were developed to improve the computation efficiency of LNC calculations. These methods, termed adaptive time stepping and adaptive mesh refinement were incorporated into a separate stand alone C++ library name the Adaptive Burnup Library (ABL). The ABL allows for other client codes to call and utilize its functionality. Adaptive time stepping is useful for automatically maximizing the size of the depletion time step while maintaining a desired level of accuracy. Adaptive meshing allows for analysis of fixed fuel configurations that would normally require a computationally burdensome number of depletion zones. Alternatively, Adaptive M

Kramer, K

2010-04-08T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Multi-attribute criteria applied to electric generation energy system analysis LDRD.  

SciTech Connect (OSTI)

This report began with a Laboratory-Directed Research and Development (LDRD) project to improve Sandia National Laboratories multidisciplinary capabilities in energy systems analysis. The aim is to understand how various electricity generating options can best serve needs in the United States. The initial product is documented in a series of white papers that span a broad range of topics, including the successes and failures of past modeling studies, sustainability, oil dependence, energy security, and nuclear power. Summaries of these projects are included here. These projects have provided a background and discussion framework for the Energy Systems Analysis LDRD team to carry out an inter-comparison of many of the commonly available electric power sources in present use, comparisons of those options, and efforts needed to realize progress towards those options. A computer aid has been developed to compare various options based on cost and other attributes such as technological, social, and policy constraints. The Energy Systems Analysis team has developed a multi-criteria framework that will allow comparison of energy options with a set of metrics that can be used across all technologies. This report discusses several evaluation techniques and introduces the set of criteria developed for this LDRD.

Kuswa, Glenn W.; Tsao, Jeffrey Yeenien; Drennen, Thomas E.; Zuffranieri, Jason V.; Paananen, Orman Henrie; Jones, Scott A.; Ortner, Juergen G. (DLR, German Aerospace, Cologne); Brewer, Jeffrey D.; Valdez, Maximo M.

2005-10-01T23:59:59.000Z

302

Auto-configuration of Savants in a complex, variable network  

E-Print Network [OSTI]

In this thesis, present a system design that enables Savants to automatically configure both their network settings and their required application programs when connected to an intelligent data management and application ...

Yu, Joseph Hon

2005-01-01T23:59:59.000Z

303

Multi-channel atomic magnetometer for magnetoencephalography: A configuration study  

E-Print Network [OSTI]

emission tomography (PET). Specifically, due to its high temporal resolution, MEG has a unique position are a high rate of liquid helium consumption, fixed sensor configuration, frequent requirement for cryogenic

Romalis, Mike

304

High temperature solid electrolyte fuel cell configurations and interconnections  

DOE Patents [OSTI]

High temperature fuel cell configurations and interconnections are made including annular cells having a solid electrolyte sandwiched between thin film electrodes. The cells are electrically interconnected along an elongated axial outer surface.

Isenberg, Arnold O. (Forest Hills, PA)

1984-01-01T23:59:59.000Z

305

A study of neutron-deuteron scattering in configuration space  

E-Print Network [OSTI]

A new computational method for solving the configuration-space Faddeev equations for the breakup scattering problem has been applied to nd scattering both below and above the two-body threshold.

V. M. Suslov; M. A. Braun; I. Filikhin; B. Vlahovic

2006-10-09T23:59:59.000Z

306

Integrated Coverage and Connectivity Configuration for Energy Conservation  

E-Print Network [OSTI]

Integrated Coverage and Connectivity Configuration for Energy Conservation in Sensor Networks University in St. Louis An effective approach for energy conservation in wireless sensor networks: Sensor network, wireless ad hoc network, coverage, connectiv- ity, energy conservation, topology

Lu, Chenyang

307

Adsorption configurations of two nitrogen atoms on graphene  

SciTech Connect (OSTI)

We present calculations for different possible configurations of two nitrogen adatoms on graphene using the code VASP, based on Density Functional Theory (DFT). Two N atoms adsorbed on the graphene sheet can share a bond in two ways. They take positions either just above two adjacent carbon atoms or they form a bridge across opposite bonds of a hexagon in the graphene sheet. Both these configurations result into structural distortion of the sheet. Another stable configuration involving two N atoms consists of an N{sub 2} molecule which is physisorbed at a distance 3.69 Å on the graphene sheet. Two N atoms can also be adsorbed on alternate bridge sites of neighbouring hexagons of graphene. This configuration again leads to distortion of the sheet in perpendicular direction.

Rani, Babita, E-mail: babitabaghla15@gmail.com [Department of Physics, Punjabi University, Patiala- 147 002 and Department of Physics, Panjab University, Chandigarh- 160 014 (India); Jindal, V. K.; Dharamvir, Keya [Department of Physics, Panjab University, Chandigarh- 160 014 (India)

2014-04-24T23:59:59.000Z

308

Constrained Density-Functional Theory--Configuration Interaction  

E-Print Network [OSTI]

In this thesis, I implemented a method for performing electronic structure calculations, "Constrained Density Functional Theory-- Configuration Interaction" (CDFT-CI), which builds upon the computational strengths of Density ...

Kaduk, Benjamin James

2012-01-01T23:59:59.000Z

309

Baffle Configuration Effects on Dynamo Self-Generation  

E-Print Network [OSTI]

Baffle Configuration Effects on Dynamo Self-Generation Understanding the Dynamics of the Earths Earth, an example of a self generating magnetic field. Self Generation, what helps: High magnetic

Anlage, Steven

310

Advanced configurations for leakage reduction in a labyrinth seal  

E-Print Network [OSTI]

ADVANCED CONFIGURATIONS FOR LEAKAGE REDUCTION IN A LABYRINTH SEAL A Thesis by SHARATH B. VELDANDA Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER... OF SCIENCE December 1992 Major Subject: Mechanical Engineering ADVANCED CONFIGURATION FOR LEAKAGE REDUCTION IN A LABYRINTH SEAL A Thesis by SHARATH B. VELDANDA Approved as to style and content by: David L. Rhode y~~ (Member) K. D. Korkan (Member...

Veldanda, Sharath B.

1992-01-01T23:59:59.000Z

311

Combining structured and unstructured data in a configurable web-based logbook  

SciTech Connect (OSTI)

A typical electronic logbook is designed as a general-purpose system for recording time-ordered events and actions and, therefore, allows for a great flexibility in recording information, but the data is unstructured. To better position it in a specific context (e.g., a, test facility, a group activity log) it needs to support both structured data (keyword, authors, etc) and unstructured data (text, title, attachments) in that context. To do this, a logbook system can define a set of attributes, possibly built as a hierarchy. These application-specific attributes will be associated with each entry. To be flexible, such a system has to be configurable to allow for tailoring it to each specific environment. The paper describes a design, functionality, and experiences with WebLog, a database-configurable electronic logbook developed with the J2EE Web technology. Various functional and technical properties of the system are discussed, including views, searches, threads of entries, an automated alerting system as well as integration with other applications.

Nogiec, J.; Trombly-Freytag, K.; /Fermilab

2009-10-01T23:59:59.000Z

312

Large-scale Probabilistic Forecasting in Energy Systems using Sparse Gaussian Conditional Random Fields  

E-Print Network [OSTI]

smart grid operations [1]. Despite their ubiquity and the complexity of many forecasting methods, most predictions of upcoming values, typically to minimize a metric such as root mean squared error. However

Kolter, J. Zico

313

Economic evaluation of the annual cycle energy system (ACES). Final report. Volume III, appendices  

SciTech Connect (OSTI)

This volume consists of seven appendices related to ACES, the first three of which are concerned with computer programs. The appendices are entitled: (A) ACESIM: Residential Program Listing; (B) Typical Inputs and Outputs of ACESIM; (C) CACESS: Commercial Building Program Listing; (D) Typical Weather-Year Selection Requirements; (E) Building Characteristics; (F) List of Major Variables Used in the Computer Programs; and (G) Bibliography. 79 references.

Not Available

1980-06-01T23:59:59.000Z

314

Unintended filtering in a typical photodiode detection system for optical tweezers  

E-Print Network [OSTI]

Unintended filtering in a typical photodiode detection system for optical tweezers Kirstine Berg-PIN photodiode and a laser with wavelength 1064 nm, a system commonly used with optical tweezers. We chopped Institute of Physics. DOI: 10.1063/1.1554755 I. INTRODUCTION Photodiode based detection systems are used

Texas at Austin. University of

315

Fig. 1. Typical topological arrangement of a hybrid fuel cell vehicle drive train [2].  

E-Print Network [OSTI]

Fig. 1. Typical topological arrangement of a hybrid fuel cell vehicle drive train [2]. TABLE I designed with more robust features. I. INTRODUCTION Fuel cell vehicles (FCV) are widely considered of a hybrid fuel cell vehicle is shown in Fig. 1 [2]. Developments in hybrid automobile industry have

Tolbert, Leon M.

316

Ex-plant consequence assessment for NUREG-1150: Models, typical results, uncertainties  

SciTech Connect (OSTI)

The assessment of ex-plant consequences for NUREG-1150 source terms was performed using the MELCOR Accident Consequence Code System (MACCS). This paper will briefly discuss the following elements of MACCS consequence calculations: input data, phenomena modeled, computational framework, typical results, controlling phenomena, and uncertainties. Wherever possible, NUREG-1150 results will be used to illustrate the discussion. 28 refs., 14 figs., 6 tabs.

Sprung, J.L.

1987-01-01T23:59:59.000Z

317

Process/equipment co-simulation for designe and analysis of advanced energy systems  

SciTech Connect (OSTI)

b s t r a c t The grand challenge facing the power and energy industries is the development of efficient, environmentally friendly, and affordable technologies for next-generation energy systems. To provide solutions for energy and the environment, the U.S. Department of Energy’s (DOE) National Energy Technology Laboratory (NETL) and its research partners in industry and academia are relying increasingly on the use of sophisticated computer-aided process design and optimization tools. In this paper, we describe recent progress toward developing an Advanced Process Engineering Co-Simulator (APECS) for the high-fidelity design, analysis, and optimization of energy plants. The APECS software system combines steady-state process simulation with multiphysics-based equipment simulations, such as those based on computational fluid dynamics (CFD). These co-simulation capabilities enable design engineers to optimize overall process performance with respect to complex thermal and fluid flow phenomena arising in key plant equipment items, such as combustors, gasifiers, turbines, and carbon capture devices. In this paper we review several applications of the APECS co-simulation technology to advanced energy systems, including coal-fired energy plants with carbon capture. This paper also discusses ongoing co-simulation R&D activities and challenges in areas such as CFD-based reduced-order modeling, knowledge management, advanced analysis and optimization, and virtual plant co-simulation. Continued progress in co-simulation technology – through improved integration, solution, and deployment – will have profound positive impacts on the design and optimization of high-efficiency, near-zero emission fossil energy systems.

Zitney, S.

2010-01-01T23:59:59.000Z

318

Summary Report of the INL-JISEA Workshop on Nuclear Hybrud Energy Systems  

SciTech Connect (OSTI)

Hybrid energy systems utilize two or more energy resources as inputs to two or more physically coupled subsystems to produce one or more energy commodities as outputs. Nuclear hybrid energy systems can be used to provide load-following electrical power to match diurnal to seasonal-scale changes in power demand or to compensate for the variability of renewable wind or solar generation. To maintain economical, full rate operation of the nuclear reactor, its thermal energy available when power demand is low could be diverted into making synthetic vehicle fuels of various types. The Institute for Nuclear Energy Science and Technology (INEST) and the Joint Institute for Strategic Energy Analysis (JISEA) co-sponsored an international workshop to identify research topics important in advancing the potential use of hybrid systems with a specific focus on nuclear-renewable hybrid systems. The workshop included presentations ranging from energy challenges and research and development (R&D) directions being pursued by nations to multiple options for hybrid systems. Those options include one that is being commercialized to other opportunities and analysis results quantifying them. The workshop also involved two breakout sessions - one focused on thermal energy management issues especially at unit-operation scale and the second focused on system operations issues including system controls, regulatory issues, technical and economic analysis, and market challenges. A discussion involving the full group focused on more general issues such as societal involvement and participation. Key criteria for selecting hybrid energy system projects and metrics for comparing them were also identified by the full group. The workshop's findings are being used initially by INEST to define topics for a research preproposal solicitation.

Mark Antkowiak; Richard Boardman; Shannon Bragg-Sitton; Robert Cherry; Mark Ruth

2012-07-01T23:59:59.000Z

319

Stability and confinement of spheromaks and field-reversed configurations  

SciTech Connect (OSTI)

The formation, confinement and stability of two types of compact toroids, spheromaks and field reversed configurations (FRC), are reviewed. Spheromaks, which contain both toroidal and poloidal magnetic fields, have been formed with magnetized coaxial plasma guns, by a combination of Z- and theta-pinch techniques and by an electrodeless slow induction technique, and trapped in both prolate and oblate flux conservers. As predicted by theory, the prolate configuration is unstable to the tilt mode, but the oblate configuration with a conducting wall is stable. Configuration lifetimes of up to 0.8 ms are observed. The FRC is a high-beta, highly prolate compact toroid formed with field-reversed theta-pinch techniques and having purely poloidal magnetic field. Theory predicts unstable fluting and internal tilting modes, but they are not observed experimentally. Configurations with high densities approx. 10/sup 15/ cm/sup -3/ and with lifetimes of 50 to 120 ..mu..s are terminated by an n=2 rotational mode of instability.

Quinn, W.E.

1982-01-01T23:59:59.000Z

320

Proceedings of the National Renewable Energy Laboratory Wind Energy Systems Engineering Workshop  

SciTech Connect (OSTI)

The second National Renewable Energy Laboratory (NREL) Wind Energy Systems Engineering Workshop was held in Broomfield, Colorado, from January 29 to February 1, 2013. The event included a day-and-a-half workshop exploring a wide variety of topics related to system modeling and design of wind turbines and plants. Following the workshop, 2 days of tutorials were held at NREL, showcasing software developed at Sandia National Laboratories, the National Aeronautics and Space Administration's Glenn Laboratories, and NREL. This document provides a brief summary of the various workshop activities and includes a review of the content and evaluation results from attendees.

Dykes, K.

2014-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Setting the Foundation for Transforming the U.S. Energy System  

SciTech Connect (OSTI)

Setting the Foundation for Transforming the U.S. Energy System: Three Federal Action Plans for Near- and Long-term Success is a short document written for the incoming U.S. Federal Administration's Transistion Team. The document represents what we believe to be foundational elements of a broad campaign to make rapid progress towards these goals for the longterm transformation necessary to meet our national economic, security, and environmental goals. The three immediate action plans include: * Creating Tomorrow’s Electricity Infrastructure * Decarbonizing the Energy Economy *Enabling Science-Based Policy

Davis, Jon M.; Virden, Jud W.; Walton, Terry L.; Brog, Terrence K.; Stiles, Dennis L.; Alderson, Karis P.; Melland, Jodi C.; Hobbs, Lori L.; Martinez, Sam J.; Quadrel, Marilyn J.; Quinn, Rod K.

2008-12-29T23:59:59.000Z

322

Abbreviations, acronyms, and initialisms frequently used by Martin Marietta Energy Systems, Inc.. Second edition  

SciTech Connect (OSTI)

Guidelines are given for using abbreviations, acronyms, and initialisms (AAIs) in documents prepared by US Department of Energy facilities managed by Martin Marietta Energy Systems, Inc., in Oak Ridge, Tennessee. The more than 10,000 AAIs listed represent only a small portion of those found in recent documents prepared by contributing editors of the Information Management Services organization of Oak Ridge National Laboratory, the Oak Ridge K-25 Site, and the Oak Ridge Y-12 Plant. This document expands on AAIs listed in the Document Preparation Guide and is intended as a companion document

Miller, J.T.

1994-09-01T23:59:59.000Z

323

Weak formulations and solution multiplicity of equilibrium configurations with Coulomb friction  

E-Print Network [OSTI]

Weak formulations and solution multiplicity of equilibrium configurations with Coulomb friction configurations of elastic struc- tures in contact with Coulomb friction. We obtain a variational formulation configurations with arbitrary small friction coefficients. We illustrate the result in two space dimensions

Bostan, Mihai

324

Call for Applications KIC-InnoEnergy PhD School The KIC InnoEnergy PHD on Sustainable Energy Systems for Renewables is opening for the  

E-Print Network [OSTI]

Call for Applications ­ KIC-InnoEnergy PhD School The KIC InnoEnergy PHD on Sustainable EnergyD on Sustainable Energy Systems for Renewables uses a multi-disciplinary approach to educate a new generation of sustainability-aware leaders with expertise in energy systems and economics. A focus on energy system design

Instituto de Sistemas e Robotica

325

Inductrack III configuration--a maglev system for high loads  

DOE Patents [OSTI]

Inductrack III configurations are suited for use in transporting heavy freight loads. Inductrack III addresses a problem associated with the cantilevered track of the Inductrack II configuration. The use of a cantilevered track could present mechanical design problems in attempting to achieve a strong enough track system such that it would be capable of supporting very heavy loads. In Inductrack III, the levitating portion of the track can be supported uniformly from below, as the levitating Halbach array used on the moving vehicle is a single-sided one, thus does not require the cantilevered track as employed in Inductrack II.

Post, Richard F

2013-11-12T23:59:59.000Z

326

Equilibrium configurations of nematic liquid crystals on a torus  

E-Print Network [OSTI]

The topology and the geometry of a surface play a fundamental role in determining the equilibrium configurations of thin films of liquid crystals. We propose here a theoretical analysis of a recently introduced surface Frank energy, in the case of two-dimensional nematic liquid crystals coating a toroidal particle. Our aim is to show how a different modeling of the effect of extrinsic curvature acts as a selection principle among equilibria of the classical energy, and how new configurations emerge. In particular, our analysis predicts the existence of new stable equilibria with complex windings.

Antonio Segatti; Michael Snarski; Marco Veneroni

2014-06-13T23:59:59.000Z

327

Method for making precisely configured flakes useful in optical devices  

DOE Patents [OSTI]

Precisely configured, especially of geometric shape, flakes of liquid crystal material are made using a mechanically flexible polymer mold with wells having shapes which are precisely configured by making the mold with a photolithographically manufactured or laser printed master. The polymer liquid crystal is poured into the wells in the flexible mold. When the liquid crystal material has solidified, the flexible mold is bent and the flakes are released and collected for use in making an electrooptical cell utilizing the liquid crystal flakes as the active element therein.

Trajkovska-Petkoska, Anka (Rochester, NY); Jacobs, Stephen D. (Pittsford, NY); Kosc, Tanya Z. (Rochester, NY); Marshall, Kenneth L. (Rochester, NY)

2007-07-03T23:59:59.000Z

328

Evaluation Of Saltstone Mixer Paddle Configuration For Improved Wear Resistance  

SciTech Connect (OSTI)

A soft metal with low wear resistance (6000 series aluminum), was used to minimize run time while maximizing wear rate. Two paddle configurations were tested, with the first four paddles after the augers replaced by the wear paddles. The first configuration was all flat paddles, with the first paddle not aligned with the augers and is consistent with present SPF mixer. The second configuration had helical paddles for the first three stages after the augers and a flat paddle at the fourth stage. The first helical paddle was aligned with the auger flight for the second configuration. The all flat paddle configuration wear rate was approximately double the wear rate of the helical paddles for the first two sets of paddles after the augers. For both configurations, there was little or no wear on the third and fourth paddle sets based on mass change, indicating that the fully wetted premix materials are much less abrasive than the un-wetted or partially wetted premix. Additionally, inspection of the wear surface of the paddles at higher magnification showed the flat paddles were worn much more than the helical and is consistent with the wear rates. Aligning the auger discharge flight with the first set of helical paddles was effective in reducing the wear rate as compared to the flat paddle configuration. Changing the paddle configuration from flat to helical resulted in a slight increase in rheological properties. Although, both tests produced grout-like material that is within the processing rage of the SPF, it should be noted that cement is not included in the premix and water was used rather than salt solution, which does affect the rheology of the fresh grout. The higher rheological properties from the helical wear test are most likely due to the reduced number of shearing paddles in the mixer. In addition, there is variation in the rheological data for each wear test. This is most likely due to the way that the dry feeds enter the mixer from the dry feeder. The premix is discharged from the hopper in an unsteady fashion, where irregular sized clumps were observed leaving the discharge of the auger, though the auger speed is constant.

Reigel, M. M.; Fowley, M. D.; Pickenheim, B. R.

2012-09-27T23:59:59.000Z

329

Community Energy Systems and the Law of Public Utilities. Volume Three. Alabama  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Alabama governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

330

Community Energy Systems and the Law of Public Utilities. Volume Ten. Delaware  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Delaware governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

331

Community Energy Systems and the Law of Public Utilities. Volume Thirty-three. New Mexico  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of New Mexico governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

332

Community Energy Systems and the Law of Public Utilities. Volume Six. Arkansas  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Arkansas governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

333

Community Energy Systems and the Law of Public Utilities. Volume Nine. Connecticut  

SciTech Connect (OSTI)

A detailed description of the laws and programs of the State of Connecticut governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

334

Community Energy Systems and the Law of Public Utilities. Volume Thirty-one. New Hampshire  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of New Hampshire governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One. An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

335

Community Energy Systems and the Law of Public Utilities. Volume Fifty-one. Wisconsin  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Wisconsin governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

336

Community Energy Systems and the Law of Public Utilities. Volume Thirty. Nevada  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Nevada governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

337

Community Energy Systems and the Law of Public Utilities. Volume Four. Alaska  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Alaska governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

338

Community Energy Systems and the Law of Public Utilities. Volume Forty-four. Tennessee  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Tennessee governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

339

Community Energy Systems and the Law of Public Utilities. Volume Forty-three. South Dakota  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of South Dakota governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

340

Community Energy Systems and the Law of Public Utilities. Volume Forty-nine. Washington  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Washington governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Community Energy Systems and the Law of Public Utilities. Volume Forty-eight. Virginia  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Virginia governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

342

Community Energy Systems and the Law of Public Utilities. Volume Eighteen. Kansas  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Kansas governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

343

Community Energy Systems and the Law of Public Utilities. Volume Nineteen. Kentucky  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Kentucky governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

344

Community Energy Systems and the Law of Public Utilities. Volume Thirty-two. New Jersey  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of New Jersey governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

345

Community Energy Systems and the Law of Public Utilities. Volume Forty. Pennsylvania  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Pennsylvania governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

346

Community Energy Systems and the Law of Public Utilities. Volume Five. Arizona  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Arizona governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

347

Community Energy Systems and the Law of Public Utilities. Volume Twelve. Georgia  

SciTech Connect (OSTI)

A detailed description of the laws and programs of the State of Georgia governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

348

Community Energy Systems and the Law of Public Utilities. Volume Thirty-nine. Oregon  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Oregon governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

349

Community Energy Systems and the Law of Public Utilities. Volume Twenty-five. Minnesota  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Minnesota governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

350

Community Energy Systems and the Law of Public Utilities. Volume Eleven. Florida  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Florida governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

351

Community Energy Systems and the Law of Public Utilities. Volume Fifteen. Illinois  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Illinois governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

352

Community Energy Systems and the Law of Public Utilities. Volume Twenty-two. Maryland  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Maryland governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

353

Solar-hydrogen energy system for a Libyan coastal county (El-Gharabulli)  

SciTech Connect (OSTI)

A model for a solar-hydrogen energy system was developed for a Libyan Coastal (Mediterranean) County, (i.e., El-Gharabulli). Present energy and economic conditions were studied. A comparison of the present conditions with the proposed solar-hydrogen energy system is presented. In the model, it is proposed to cover the southern parts of the county with photovoltaic cells in order to provide partly the electric energy needs of the county for the different sectors, such as domestic, commercial and industrial, as well as to electrolyze water to produce hydrogen and oxygen. Hydrogen would be stored and distributed for different uses, such as fuel for transportation and industry, and as gas for domestic and commercial use. Part of the hydrogen would be used though fuel cells to generate electricity for night times and cloudy days when the sun is not available. The area under the photovoltaic cells would be partly shaded, which would provide suitable environment for growing some varieties of cash crops. Sea water would be desalinated through a desalination plant on the coast to provide fresh water for domestic, commercial and industrial use, as well as for irrigation of the new agricultural areas in the south.

El-Osta, W.B.

1987-01-01T23:59:59.000Z

354

Solar energy system performance evaluation: seasonal report for IBM System IA, Huntsville, Alabama  

SciTech Connect (OSTI)

The analysis used is based on instrumented system data monitored and collected for at least one full season of operation. The long-term field performance of the installed system is reported. The Solar Energy System, Sims Prototype System 1A, was designed by IBM to provide 50 to 60% of the space heating and domestic hot water (DHW) preheating load to a 2000 square foot floor space single faily residence in the Huntsville area. The load design temperature inside the building was to be maintained at 70 degrees fahrenheit with auxiliary energy for heating supplied by an electric heat pump assisted by an electric resistance strip heater. Auxiliary energy for domestic hot water is from a conventional 20-gallon DHW storage tank. The solar energy system, uses air as the heat transport medium, has a 720 square foot Solar Energy Products Collector Array, a 22-ton rock storage located within the office building, a pump, heat exchanger, air handler, pre-heat tank, fan and associated plumbing. The system has five different modes of operation.

Not Available

1980-05-01T23:59:59.000Z

355

Community Energy Systems and the Law of Public Utilities. Volume Eight. Colorado  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of Colorado governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D A; Weaver, C L

1981-01-01T23:59:59.000Z

356

Community Energy Systems and the Law of Public Utilities. Volume Thirty-seven. Ohio  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of Ohio governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

357

Sensitivity analysis of synergistic collaborative scenarios towards sustainable nuclear energy systems  

SciTech Connect (OSTI)

The paper presents results of the study on the role of collaboration among countries towards sustainable global nuclear energy systems. The study explores various market shares for nuclear fuel cycle services, possible scale of collaboration among countries and assesses benefits and issues relevant for collaboration between suppliers and users of nuclear fuel cycle services. The approach used in the study is based on a heterogeneous world model with grouping of the non-personified nuclear energy countries according to different nuclear fuel cycle policies. The methodology applied in the analysis allocates a fraction of future global nuclear energy generation to each of such country-groups as a function of time. The sensitivity studies performed show the impacts of the group shares on the scope of collaboration among countries and on the resulting possible reactor mix and nuclear fuel cycle infrastructure versus time. The study quantitatively demonstrates that the synergistic approach to nuclear fuel cycle has a significant potential for offering a win-win collaborative strategy to both, technology holders and technology users on their joint way to future sustainable nuclear energy systems. The study also highlights possible issues on such a collaborative way. (authors)

Fesenko, G.; Kuznetsov, V. [IAEA, Wagramer Strasse 5, P.O. Box 100, A-1400, Vienna (Austria); Poplavskaya, E. [Institute of Physics and Power Engineering, Obninsk (Russian Federation)

2013-07-01T23:59:59.000Z

358

Community Energy Systems and the Law of Public Utilities. Volume Two. Federal  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the Federal government governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

359

Study of the impacts of regulations affecting the acceptance of integrated community energy systems. Final report  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of North Carolina governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, Duane A.; Weaver, Clifford L.; Rielley, Kevin J.; Gallagher, Kevin C.; Harmon, Susan B.; Hejna, David T.; Kitch, Edmund W.

1981-01-01T23:59:59.000Z

360

Community Energy Systems and the Law of Public Utilities. Volume Forty-two. South Carolina  

SciTech Connect (OSTI)

A detailed description is given of the laws and programs of the State of South Carolina governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Community Energy Systems and the Law of Public Utilities. Volume Thirty-six. North Dakota  

SciTech Connect (OSTI)

A detailed description is presented of the laws and programs of the State of North Dakota governing the regulation of public energy utilities, the siting of energy generating and transmission facilities, the municipal franchising of public energy utilities, and the prescription of rates to be charged by utilities including attendant problems of cost allocations, rate base and operating expense determinations, and rate of return allowances. These laws and programs are analyzed to identify impediments which they may present to the implementation of Integrated Community Energy Systems (ICES). This report is one of fifty-one separate volumes which describe such regulatory programs at the Federal level and in each state as background to the report entitled Community Energy Systems and the Law of Public Utilities - Volume One: An Overview. This report also contains a summary of a strategy described in Volume One - An Overview for overcoming these impediments by working within the existing regulatory framework and by making changes in the regulatory programs to enhance the likelihood of ICES implementation.

Feurer, D.A.; Weaver, C.L.

1981-01-01T23:59:59.000Z

362

Gender stereotypes of typical and ideal man, woman and person: the impact of role inferences  

E-Print Network [OSTI]

Housekeeping Mai ntenance of home 1. 40 0. 58 2. 01 0. 82 1. 59 1. 00 0. 225 0. 452 -0. 496 -0. 715 -0. 143 0. 305 9. 19 11. 14 20. 71 22. 76 11. 82 16. 67 4. 38 4. 48 10. 81 7. 71 6. 36 4. 05 7. 09 7. 95 4. 43 2. 76 3. 09 3. 90 Note. Higher numbers... sex, F(2, 121)=3. 23, p&. 05, and target role, F(1, 121)=22. 90, p&. 001. Planned comparisons revealed that the typical man was rated as possessing significantly fewer feminine positive traits than the typical woman, F(1, 121)=6. 53, p&. 01...

Rhodes, Nancy Deane

1986-01-01T23:59:59.000Z

363

A Highly Configurable Cache for Low Energy Embedded Systems  

E-Print Network [OSTI]

A Highly Configurable Cache for Low Energy Embedded Systems CHUANJUN ZHANG San Diego State University and FRANK VAHID and WALID NAJJAR University of California, Riverside Energy consumption is a major for about 50% of the total energy consumed in these systems. The performance of a given cache architecture

Najjar, Walid A.

364

Sustainability of Self-Configuring Wireless Sensor Bozena Kaminska  

E-Print Network [OSTI]

Sustainability of Self-Configuring Wireless Sensor Networks Bozena Kaminska Simon Fraser University monitoring and security. Those applications impose requirements for sustained, reliable, and fault-tolerant operation. We introduce a new ad-hoc wireless architecture in which forwarding is based on associativity

Gburzynski, Pawel

365

ON THE CONFIGURATION-LP FOR SCHEDULING ON UNRELATED MACHINES  

E-Print Network [OSTI]

ON THE CONFIGURATION-LP FOR SCHEDULING ON UNRELATED MACHINES JOSÃ? VERSCHAE AND ANDREAS WIESE Abstract. One of the most important open problems in machine scheduling is the problem of scheduling a set of jobs on unrelated machines to minimize the makespan. The best known approximation algorithm

Nabben, Reinhard

366

Novel Dipole Trapped Spheromak Configuration M. R. Brown,1,  

E-Print Network [OSTI]

Novel Dipole Trapped Spheromak Configuration M. R. Brown,1, * C. D. Cothran,1 J. Fung,1 M. J. Schaffer,2 and E. Belova3 We report the observation and characterization of a spheromak formed in the Swarthmore Spheromak Experiment (SSX) and trapped in a simple dipole magnetic field. The spheromak is studied

Brown, Michael R.

367

I.V. Stasyuk, O.V. Velychko CONFIGURATIONAL MODEL  

E-Print Network [OSTI]

Complex formation reactions of metal ions and ligand groups are of great importance due to pollution of environment by heavy metal (including actinides) species. In general this type of reaction can be described' & $ % I.V. Stasyuk, O.V. Velychko CONFIGURATIONAL MODEL OF METAL ION COMPLEX FORMATION IN WATER

368

Configuration Distribution and Designs of Codes in the Johnson Scheme  

E-Print Network [OSTI]

Configuration Distribution and Designs of Codes in the Johnson Scheme Tuvi Etzion Technion between perfect codes in the Johnson scheme and designs, and provide new tools for proving Delsarte conjecture that there are no nontrivial perfect codes in the Johnson scheme. Three topics will be considered

Etzion, Tuvi

369

Optimization of measurement configurations for geometrical calibration of industrial robot  

E-Print Network [OSTI]

, the accuracy of robotic manipulator depends on a number of factors. Usually, for the industrial applicationsOptimization of measurement configurations for geometrical calibration of industrial robot Alexandr of industrial robots employed in precise manufacturing. To identify geometric parameters, an advanced

Paris-Sud XI, Université de

370

On Cavitation, Configurational Forces and Implications for Fracture in  

E-Print Network [OSTI]

On Cavitation, Configurational Forces and Implications for Fracture in a Nonlinearly Elastic tensile stress can induce cavitation, that is, the appearance of voids that were not previously evident con- sequence of this viewpoint is that cavitation may then take place at a point

Sivaloganathan, J.

371

Instruction Set Extension with Shadow Registers for Configurable Processors  

E-Print Network [OSTI]

limitation in configurable processors, and then propose a novel low-cost architectural extension growing despite increasingly expensive CAD tools. This urges a move toward the use of programmable. Reconfigurable platforms, combined reconfigurable fabric with a general-purpose processor, are a promising

Cong, Jason "Jingsheng"

372

CONFIGURING A COLLABORATIVE VIRTUAL WORKSPACE FOR DISASTER MANAGEMENT OF  

E-Print Network [OSTI]

a strong impact on business. Oil & gas companies are thus continuously seeking to employ processesCONFIGURING A COLLABORATIVE VIRTUAL WORKSPACE FOR DISASTER MANAGEMENT OF OIL & GAS OFFSHORE workspace. Finally a prototype for oil & gas offshore structures disaster management based on our multi

Barbosa, Alberto

373

Electromagnetic Waves Propagation in 3D Plasma Configurations  

E-Print Network [OSTI]

Electromagnetic Waves Propagation in 3D Plasma Configurations Pavel Popovich, W. Anthony Cooper in a plasma strongly depends on the frequency, therefore the tools used for wave propagation studies are very that will allow for the calculation of the fields and energy deposition of a low-frequency wave propagating

374

Network Configuration and Management via Two-Phase Online Optimization  

E-Print Network [OSTI]

with highly dynamic behavior, it is not practical to accurately capture system's response with a model rates or variable demand profile. In this paper, we take the latter approach and perform in-situ trials the best configuration settings for networks is becoming more difficult. Manageabil- ity of large

Yuksel, Murat

375

Exploratory Patent Search with Faceted Search and Configurable Entity Mining  

E-Print Network [OSTI]

Exploratory Patent Search with Faceted Search and Configurable Entity Mining Pavlos Fafalios1 Searching for patents is usually a recall-oriented problem and depending on the patent search type, quite. We propose an exploratory strategy for patent search that exploits the metadata already available

Tzitzikas, Yannis

376

CRAD, Configuration Management- Los Alamos National Laboratory Weapons Facility  

Broader source: Energy.gov [DOE]

A section of Appendix C to DOE G 226.1-2 "Federal Line Management Oversight of Department of Energy Nuclear Facilities." Consists of Criteria Review and Approach Documents (CRADs) used for an assessment of the Configuration Management program at the Los Alamos National Laboratory, Weapons Facility.

377

Version Models for Software Configuration Management REIDAR CONRADI  

E-Print Network [OSTI]

" (project manage- ment, SCM, and quality assurance have come into operation). Furthermore, SCM plays and change requests), and audit and review (quality assurance func- tions to preserve product consistency based on configuration rules. Finally, we provide an overview of systems that have had significant

Redmiles, David F.

378

Estimating solar access of typical residential rooftops: A case study in San Jose, CA  

SciTech Connect (OSTI)

Shadows cast by trees and buildings can limit the solar access of rooftop solar-energy systems, including photovoltaic panels and thermal collectors. This study characterizes rooftop shading in a residential neighborhood of San Jose, CA, one of four regions analyzed in a wider study of the solar access of California homes.High-resolution orthophotos and LiDAR (Light Detection And Ranging) measurements of surface height were used to create a digital elevation model of all trees and buildings in a 4 km2 residential neighborhood. Hourly shading of roofing planes (the flat elements of roofs) was computed geometrically from the digital elevation model. Parcel boundaries were used to determine the extent to which roofing planes were shaded by trees and buildings in neighboring parcels.In the year in which surface heights were measured (2005), shadows from all sources ("total shading") reduced the insolation received by S-, SW-, and W-facing residential roofing planes in the study area by 13 - 16percent. Shadows cast by trees and buildings in neighboring parcels reduced insolation by no more than 2percent. After 30 years of simulated maximal tree growth, annual total shading increased to 19 - 22percent, and annual extraparcel shading increased to 3 - 4percent.

Levinson, Ronnen M.; Gupta, Smita; Akbari, Hashem; Pomerantz, Melvin

2008-03-03T23:59:59.000Z

379

Basewide energy systems plan, Hawthorne Army Ammunition Plant, Hawthorne, Nevada; executive summary. Final report  

SciTech Connect (OSTI)

This document is the Executive Summary of the Basewide Energy Systems Plan for the Hawthorne Army Ammunition Plant (HWAAP) at Hawthorne, Nevada. This project has been executed as a part of the Department of the Army`s Energy Engineering Analysis Program (EEAP). The overall objective of the project is to develop a systematic plan of projects that will result in the reduction of energy consumption in compliance with the objectives set forth in the Army Facilities Energy Plan (AFEP), without decreasing the readiness posture of the Army. The Hawthorne Army Ammunition Plant is a Government Owned and Contractor Operator (GOCO) Army facility. Consequently, any reference made in this document to the Energy Conservation Investment Program (ECIP) is directly analagous to Energy Conservation and Management (ECAM). The ECAM designation pertains specifically to GOCO Army installations. All Programming Documents for projects developed from this study reference ECAM wherever ECIP is called for.

NONE

1983-03-25T23:59:59.000Z

380

Do Photovoltaic Energy Systems Effect Residential Selling Prices? Results from a California Statewide Investigation.  

SciTech Connect (OSTI)

An increasing number of homes in the U.S. have sold with photovoltaic (PV) energy systems installed at the time of sale, yet relatively little research exists that provides estimates of the marginal impacts of those PV systems on home sale prices. This research analyzes a large dataset of California homes that sold from 2000 through mid-2009 with PV installed. We find strong evidence that homes with PV systems sold for a premium over comparable homes without PV systems during this time frame. Estimates for this premium expressed in dollars per watt of installed PV range, from roughly $4 to $6.4/watt across the full dataset, to approximately $2.3/watt for new homes, to more than $6/watt for existing homes. A number of ideas for further research are suggested.

Hoen, Ben; Cappers, Pete; Wiser, Ryan; Thayer, Mark

2011-04-12T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Solar energy system demonstration project at Wilmington Swim School, New Castle, Delaware. Final report  

SciTech Connect (OSTI)

This document is the Final Report of the Solar Energy System located at the Wilmington, Swim School, New Castle, Delaware. This active solar system is composed of 2,700 square feet of Revere liquid flat plate collectors piped to a 2,800 gallon concrete storage tank located below ground near the building. A micro-computer based control system selects the optimal applications of the stored energy among space, domestic water and pool alternatives. The controlled logic is planned for serving the heat loads in the following order: space heat-new addition, domestic water-entire facility, and pool heating-entire facility. A modified trombe wall passive operation the active system will bypass the areas being served passively. The system was designed for a 40 percent heating and a 30 percent hot water solar contribution.

None

1980-07-01T23:59:59.000Z

382

Solar energy system performance evaluation: seasonal report for IBM System 3, Glendo, Wyoming  

SciTech Connect (OSTI)

The IBM System 3 Solar Energy System was designed by the Federal Systems Division of IBM in Huntsville, Alabama to provide 46% of the space heating and 80% of the domestic hot water (DHW) for a 1078 square foot retrofit of an existing building used as a residence at the Glendo Reservoir State Park Ranger Station. The system consists of fourteen Sunworks Model LA1001A flat plate liquid collectors (294 square feet), a 1000 gallon hot water storage tank, a 65 gallon electric domestic hot water tank, pumps, heat exchangers, controls, and associated plumbing. Water is the heat transfer medium for this closed volume, passive drain down system. A gas furnace is used for auxiliary space heating energy. The system which became operational in October 1978 has five modes of operation. Performance data for the year of 1979 are presented and assessed.

None

1980-06-01T23:59:59.000Z

383

Solar energy system performance evaluation: seasonal report for IBM System 4 at Clinton, Mississippi  

SciTech Connect (OSTI)

The IBM System 4 Solar Energy System was designed to provide 35 percent of the space heating and 62 percent of the domestic hot water (DHW) preheating for a single-family residence located within the United States. The system is a prepackaged unit called the Remote Solar Assembly which has been integrated into the heating and DHW system in a dormitory in Clinton, Mississippi. The system consists of 259 square feet of Solaron 2001 Series flat-plate-air collectors, a rock thermal storage containing 5 1/2 ton of rock, heat exchangers, blowers, a 52 gallon preheat tank, controls, and associated plumbing, two 30 gallon electric water heaters draw water from the preheat tank. A 20 kilowatt, duct mounted, electric heater supplies auxiliary energy. This system which has three modes of system operation was activated September, 1978. A system performance assessment is presented.

None

1980-07-01T23:59:59.000Z

384

Solar energy system performance evaluation: seasonal report for Colt Yosemite, Yosemite National Park, California  

SciTech Connect (OSTI)

The Solar Energy System, Colt Yosemite, was designed to provide 52% of the heating (2500 sq ft area) for the Visitors Center at Yosemite National Park, California. The system consists of 980 sq ft of Colt A-151 series flat-plate liquid collectors, a petroleum-base thermal energy transport fluid, a 2500 gallon water-filled solar energy storage tank, heat exchangers, pumps, controls and associated plumbing. Solar heated water is pumped through a liquid-to-air heat exchanger in the space heating supply duct. Auxiliary hot water is provided from an oil-fired boiler to a second liquid-to-air heat exchanger when the solar energy is not sufficient to meet the space heating demand. There are four modes of system operation.

None

1980-08-01T23:59:59.000Z

385

Solar energy system performance evaluation: seasonal report for Solaron-Duffield, Duffield, Virginia  

SciTech Connect (OSTI)

The Solaron Duffield Solar Energy System was designed to provide 51% of the space heating, and 49% of the domestic hot water (DHW) to a two story 1940 square foot area residence using air as the transport medium. The system consists of a 429 square foot collector array, a 265 cubic foot rock thermal storage bin, heat exchangers, an 80 gallon DHW preheat tank, pumps, blowers, controls, air ducting and associated plumbing. An air-to-liquid heat pump coupled with a 1000 gallon water storage tank provides for auxiliary space heating and can also be used for space cooling. A 52 gallon electric DHW tank using the solar preheated water provides domestic hot water to the residence. The solar system became operational July 1979, and modes of operation are described. (MHR)

None

1980-07-01T23:59:59.000Z

386

ICENES `91:Sixth international conference on emerging nuclear energy systems. Program and abstracts  

SciTech Connect (OSTI)

This document contains the program and abstracts of the sessions at the Sixth International Conference on Emerging Nuclear Energy Systems held June 16--21, 1991 at Monterey, California. These sessions included: The plenary session, fission session, fission and nonelectric session, poster session 1P; (space propulsion, space nuclear power, electrostatic confined fusion, fusion miscellaneous, inertial confinement fusion, {mu}-catalyzed fusion, and cold fusion); Advanced fusion session, space nuclear session, poster session 2P, (nuclear reactions/data, isotope separation, direct energy conversion and exotic concepts, fusion-fission hybrids, nuclear desalting, accelerator waste-transmutation, and fusion-based chemical recycling); energy policy session, poster session 3P (energy policy, magnetic fusion reactors, fission reactors, magnetically insulated inertial fusion, and nuclear explosives for power generation); exotic energy storage and conversion session; and exotic energy storage and conversion; review and closing session.

Not Available

1991-12-31T23:59:59.000Z

387

Zone Level Occupant-Responsive Building Energy Systems at the GSA  

SciTech Connect (OSTI)

The General Services Administration (GSA) partnered with the U.S. Department of Energy (DOE) to develop and implement building energy system retrofits, aiming to reduce energy consumption of at least two building systems by a total of 30 percent or more, as part of DOE’s Commercial Building Partnership (CBP) Program. Lawrence Berkeley National Laboratory (LBNL) provided technical expertise in support of this DOE program, working with the GSA and a team of consultants. This case study reports expected energy savings from appropriate energy efficient design and operations modifications to lighting and heating, ventilating and air conditioning (HVAC) systems at the selected study sites. These retrofits comprised installation of new lighting systems with dimming capability and occupancy-sensor control at the individual light fixture level, and utilized lighting system occupancy sensor signals to continually readjust zone-level ventilation airflow according to the number of people present, down to minimum rates when vacant.

Robinson, Alastair

2014-03-01T23:59:59.000Z

388

Configuration Management Plan for Tank Farm Restoration and Safe Operations Project W-314 [CANCELLED  

SciTech Connect (OSTI)

The W-314 configuration management (CM) plan describes the systems, processes and procedures for implementing CM.

MCGREW, D.L.

2001-01-12T23:59:59.000Z

389

Configuration and Validation of the LHC Beam Loss Monitoring System  

E-Print Network [OSTI]

The LHC Beam Loss Monitoring (BLM) system is one of the most complex instrumentation systems deployed in the LHC. As well as protecting the machine, the system is also used as a means of diagnosing machine faults, and providing feedback of losses to the control room and several systems such as the Collimation, the Beam Dump and the Post-Mortem. The system has to transmit and process signals from over 4’000 monitors, and has approaching 3 million configurable parameters. This paper describes the types of configuration data needed, the means used to store and deploy all the parameters in such a distributed system and how operators are able to alter the operating parameters of the system, particularly with regard to the loss threshold values. The various security mechanisms put in place, both at the hardware and software level, to avoid accidental or malicious modification of these BLM parameters are also shown for each case.

Zamantzas, C; Emery, J; Fitzek, J; Follin, F; Jackson, S; Kain, V; Kruk, G; Misiowiec, M; Roderick, C; Sapinski, M

2009-01-01T23:59:59.000Z

390

DFT STUDY REVISES INTERSTITIAL CONFIGURATIONS IN HCP Zr  

SciTech Connect (OSTI)

Analysis of experimental result on microstructure evolution in irradiated Zr and alloys has demonstrated that available knowledge on self-interstitial defects in Zr is in contradiction. We therefore have initiated an extensive theoretical and modeling program to clarify this issue. In this report we present first ab initio calculations results of single SIA configurations in Zr. We demonstrate importance of simulations cell size, applied exchange-correlation functional and simulated c/a ratio. The results obtained demonstrate clearly that the most stable configurations are in basal plane and provide some evidences for enhanced interstitial transport along basal planes. The results obtained will be used in generation a new interatomic potential for Zr to be used in large-scale atomistic modeling of mechanisms relevant for radiation-induced microstructure evolution.

Samolyuk, German D [ORNL; Golubov, Stanislav I [ORNL; Osetskiy, Yury N [ORNL; Stoller, Roger E [ORNL

2012-06-01T23:59:59.000Z

391

Configuration and temperature dependence of magnetic damping in spin valves  

SciTech Connect (OSTI)

Using vector-analyzer ferromagnetic resonance, we have studied the microwave susceptibility of a Py/Co/Cu/Co/MnIr spin valve over a large temperature range (5-450 K) and as a function of the magnetic configuration. An effective magnetization and Gilbert damping constant of 1.1 T and 0.021, respectively, are found for the permalloy free layer, with no discernible variation in temperature observed for either quantities. In contrast, the pinned layer magnetization is reduced by heating, and the exchange bias collapses near a temperature of 450 K. The ferromagnetic resonance linewidth of the free layer increases by 500 MHz when the layer magnetizations are aligned in antiparallel, which is attributed to a configuration-dependent contribution to the damping from spin pumping effects.

Joyeux, X.; Devolder, T.; Kim, Joo-Von; Gomez de la Torre, Y.; Eimer, S.; Chappert, C. [Institut d'Electronique Fondamentale, University Paris-Sud, 91405 Orsay (France); UMR8622, CNRS, University Paris-Sud, 91405 Orsay (France)

2011-09-15T23:59:59.000Z

392

Deep Trek Re-configurable Processor for Data Acquisition (RPDA)  

SciTech Connect (OSTI)

This report summarizes technical progress achieved during the cooperative research agreement between Honeywell and U.S. Department of Energy to develop a high-temperature Re-configurable Processor for Data Acquisition (RPDA). The RPDA development has incorporated multiple high-temperature (225C) electronic components within a compact co-fired ceramic Multi-Chip-Module (MCM) package. This assembly is suitable for use in down-hole oil and gas applications. The RPDA module is programmable to support a wide range of functionality. Specifically this project has demonstrated functional integrity of the RPDA package and internal components, as well as functional integrity of the RPDA configured to operate as a Multi-Channel Data Acquisition Controller. This report reviews the design considerations, electrical hardware design, MCM package design, considerations for manufacturing assembly, test and screening, and results from prototype assembly and characterization testing.

Bruce Ohme; Michael Johnson

2009-06-30T23:59:59.000Z

393

Neutrinoless double beta decay studied with configuration mixing methods  

E-Print Network [OSTI]

We study neutrinoless double beta decay of several isotopes with state-of-the-art beyond self-consistent mean field methods to compute the nuclear matrix elements (NME). Generating coordinate method with particle number and angular momentum projection (GCM+PNAMP) is used for finding mother and granddaughter states and evaluating transition operators between different nuclei. We analyze explicitly the role of the deformation, pairing and configuration mixing in the evaluation of the NME.

Tomas R. Rodriguez; Gabriel Martinez-Pinedo

2010-12-08T23:59:59.000Z

394

Role of anisotropy configuration in exchange-biased systems.  

SciTech Connect (OSTI)

We present a systematic study of the anisotropy configuration effects on the magnetic properties of exchange-biased ferromagnetic/antiferromagnetic (FM/AFM) Co/IrMn bilayers. The interfacial unidirectional anisotropy is set extrinsically via a field cooling procedure with the magnetic field misaligned by an angle {beta}{sub FC} with respect to the intrinsic FM uniaxial anisotropy. High resolution angular dependence in-plane resolved Kerr magnetometry measurements have been performed for three different anisotropy arrangements, including collinear {beta}{sub FC} = 0 and two opposite noncollinear cases. The symmetry breaking of the induced noncollinear configurations results in a peculiar nonsymmetric magnetic behavior of the angular dependence of magnetization reversal, coercivity, and exchange bias. The experimental results are well reproduced without any fitting parameter by using a simple model including the induced anisotropy configuration. Our finding highlights the importance of the relative angle between anisotropies in order to properly account for the magnetic properties of exchange-biased FM/AFM systems.

Jimenez, E.; Camarero, J.; Perna, P.; Mikuszeit, N.; Teran, F. J.; Sort, J.; Nogues, J.; Garcia-Martin, J. M.; Hoffmann, A.; Dieny, B.; Miranda, R. (Materials Science Division); (Univ. Autonoma de Madrid); (Univ. Autonoma de Barcelona); (SPINTEC); (Inst. de Microelectronica de Madrid)

2011-01-01T23:59:59.000Z

395

Analytic energy gradients for constrained DFT-configuration interaction  

SciTech Connect (OSTI)

The constrained density functional theory-configuration interaction (CDFT-CI) method has previously been used to calculate ground-state energies and barrier heights, and to describe electronic excited states, in particular conical intersections. However, the method has been limited to evaluating the electronic energy at just a single nuclear configuration, with the gradient of the energy being available only via finite difference. In this paper, we present analytic gradients of the CDFT-CI energy with respect to nuclear coordinates, which gives the potential for accurate geometry optimization and molecular dynamics on both the ground and excited electronic states, a realm which is currently quite challenging for electronic structure theory. We report the performance of CDFT-CI geometry optimization for representative reaction transition states as well as molecules in an excited state. The overall accuracy of CDFT-CI for computing barrier heights is essentially unchanged whether the energies are evaluated at geometries obtained from quadratic configuration-interaction singles and doubles (QCISD) or CDFT-CI, indicating that CDFT-CI produces very good reaction transition states. These results open up tantalizing possibilities for future work on excited states.

Kaduk, Benjamin; Tsuchimochi, Takashi; Van Voorhis, Troy, E-mail: tvan@mit.edu [Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States)

2014-05-14T23:59:59.000Z

396

Measure Guideline: Optimizing the Configuration of Flexible Duct Junction Boxes  

SciTech Connect (OSTI)

This measure guideline offers additional recommendations to heating, ventilation, and air conditioning (HVAC) system designers for optimizing flexible duct, constant-volume HVAC systems using junction boxes within Air Conditioning Contractors of America (ACCA) Manual D guidance (Rutkowski, H. Manual D -- Residential Duct Systems, 3rd edition, Version 1.00. Arlington, VA: Air Conditioning Contractors of America, 2009.). IBACOS used computational fluid dynamics software to explore and develop guidance to better control the airflow effects of factors that may impact pressure losses within junction boxes among various design configurations (Beach, R., Prahl, D., and Lange, R. CFD Analysis of Flexible Duct Junction Box Design. Golden, CO: National Renewable Energy Laboratory, submitted for publication 2013). These recommendations can help to ensure that a system aligns more closely with the design and the occupants' comfort expectations. Specifically, the recommendations described herein show how to configure a rectangular box with four outlets, a triangular box with three outlets, metal wyes with two outlets, and multiple configurations for more than four outlets. Designers of HVAC systems, contractors who are fabricating junction boxes on site, and anyone using the ACCA Manual D process for sizing duct runs will find this measure guideline invaluable for more accurately minimizing pressure losses when using junction boxes with flexible ducts.

Beach, R.; Burdick, A.

2014-03-01T23:59:59.000Z

397

Applications of Systems Engineering to the Research, Design, and Development of Wind Energy Systems  

SciTech Connect (OSTI)

This paper surveys the landscape of systems engineering methods and current wind modeling capabilities to assess the potential for development of a systems engineering to wind energy research, design, and development. Wind energy has evolved from a small industry in a few countries to a large international industry involving major organizations in the manufacturing, development, and utility sectors. Along with this growth, significant technology innovation has led to larger turbines with lower associated costs of energy and ever more complex designs for all major subsystems - from the rotor, hub, and tower to the drivetrain, electronics, and controls. However, as large-scale deployment of the technology continues and its contribution to electricity generation becomes more prominent, so have the expectations of the technology in terms of performance and cost. For the industry to become a sustainable source of electricity, innovation in wind energy technology must continue to improve performance and lower the cost of energy while supporting seamless integration of wind generation into the electric grid without significant negative impacts on local communities and environments. At the same time, issues associated with wind energy research, design, and development are noticeably increasing in complexity. The industry would benefit from an integrated approach that simultaneously addresses turbine design, plant design and development, grid interaction and operation, and mitigation of adverse community and environmental impacts. These activities must be integrated in order to meet this diverse set of goals while recognizing trade-offs that exist between them. While potential exists today to integrate across different domains within the wind energy system design process, organizational barriers such as different institutional objectives and the importance of proprietary information have previously limited a system level approach to wind energy research, design, and development. To address these challenges, NREL has embarked on an initiative to evaluate how methods of systems engineering can be applied to the research, design and development of wind energy systems. Systems engineering is a field within engineering with a long history of research and application to complex technical systems in domains such as aerospace, automotive, and naval architecture. As such, the field holds potential for addressing critical issues that face the wind industry today. This paper represents a first step for understanding this potential through a review of systems engineering methods as applied to related technical systems. It illustrates how this might inform a Wind Energy Systems Engineering (WESE) approach to the research, design, and development needs for the future of the industry. Section 1 provides a brief overview of systems engineering and wind as a complex system. Section 2 describes these system engineering methods in detail. Section 3 provides an overview of different types of design tools for wind energy with emphasis on NREL tools. Finally, Section 4 provides an overview of the role and importance of software architecture and computing to the use of systems engineering methods and the future development of any WESE programs. Section 5 provides a roadmap of potential research integrating systems engineering research methodologies and wind energy design tools for a WESE framework.

Dykes, K.; Meadows, R.; Felker, F.; Graf, P.; Hand, M.; Lunacek, M.; Michalakes, J.; Moriarty, P.; Musial, W.; Veers, P.

2011-12-01T23:59:59.000Z

398

Applied & Computational MathematicsChallenges for the Design and Control of Dynamic Energy Systems  

SciTech Connect (OSTI)

The Energy Independence and Security Act of 2007 (EISA) was passed with the goal 'to move the United States toward greater energy independence and security.' Energy security and independence cannot be achieved unless the United States addresses the issue of energy consumption in the building sector and significantly reduces energy consumption in buildings. Commercial and residential buildings account for approximately 40% of the U.S. energy consumption and emit 50% of CO{sub 2} emissions in the U.S. which is more than twice the total energy consumption of the entire U.S. automobile and light truck fleet. A 50%-80% improvement in building energy efficiency in both new construction and in retrofitting existing buildings could significantly reduce U.S. energy consumption and mitigate climate change. Reaching these aggressive building efficiency goals will not happen without significant Federal investments in areas of computational and mathematical sciences. Applied and computational mathematics are required to enable the development of algorithms and tools to design, control and optimize energy efficient buildings. The challenge has been issued by the U.S. Secretary of Energy, Dr. Steven Chu (emphasis added): 'We need to do more transformational research at DOE including computer design tools for commercial and residential buildings that enable reductions in energy consumption of up to 80 percent with investments that will pay for themselves in less than 10 years.' On July 8-9, 2010 a team of technical experts from industry, government and academia were assembled in Arlington, Virginia to identify the challenges associated with developing and deploying newcomputational methodologies and tools thatwill address building energy efficiency. These experts concluded that investments in fundamental applied and computational mathematics will be required to build enabling technology that can be used to realize the target of 80% reductions in energy consumption. In addition the finding was that there are tools and technologies that can be assembled and deployed in the short term - the next 3-5 years - that can be used to significantly reduce the cost and time effective delivery of moderate energy savings in the U.S. building stock. Simulation tools, which are a core strength of current DOE computational research programs, provide only a part of the answer by providing a basis for simulation enabled design. New investments will be required within a broad dynamics and control research agenda which must focus on dynamics, control, optimization and simulation of multi-scale energy systems during design and operation. U.S. investments in high performance and high productivity computing (HP2C) should be leveraged and coupled with advances in dynamics and control to impact both the existing building stock through retrofits and also new construction. The essential R&D areas requiring investment are: (1) Characterizing the Dynamics of Multi-scale Energy Systems; (2) Control and Optimization Methodologies of Multi-scale Energy Systems Under Uncertainty; and (3) Multiscale Modeling and Simulation Enabled Design and Operation. The concept of using design and control specific computational tools is a new idea for the building industry. The potential payoffs in terms of accelerated design cycle times, performance optimization and optimal supervisory control to obtain and maintain energy savings are huge. Recent advances in computational power, computer science, and mathematical algorithms offer the foundations to address the control problems presented by the complex dynamics of whole building systems. The key areas for focus and associated metrics with targets for establishing competitiveness in energy efficient building design and operation are: (1) Scalability - Current methodology and tools can provide design guidance for very low energy buildings in weeks to months; what is needed is hours to days. A 50X improvement is needed. (2) Installation and commissioning - Current methodology and tools can target a three month window for commissioni

Brown, D L; Burns, J A; Collis, S; Grosh, J; Jacobson, C A; Johansen, H; Mezic, I; Narayanan, S; Wetter, M

2011-03-10T23:59:59.000Z

399

The construction manager is typically selected at the beginning of the design process. The Guaranteed Maximum Price is usually prepared based on 50% Construction Documents. In these typical cases the  

E-Print Network [OSTI]

The construction manager is typically selected at the beginning of the design process. The Guaranteed Maximum Price is usually prepared based on 50% Construction Documents. In these typical cases and 50% Construction Documents. The deliverable at 50% Construction Documents includes the Guaranteed

Sura, Philip

400

EVALUATION METHODOLOGY FOR PROLIFERATION RESISTANCE AND PHYSICAL PROTECTION OF GENERATION IV NUCLEAR ENERGY SYSTEMS: AN OVERVIEW.  

SciTech Connect (OSTI)

This paper provides an overview of the methodology approach developed by the Generation IV International Forum Expert Group on Proliferation Resistance & Physical Protection for evaluation of Proliferation Resistance and Physical Protection robustness of Generation IV nuclear energy systems options. The methodology considers a set of alternative systems and evaluates their resistance or robustness to a collection of potential threats. For the challenges considered, the response of the system to these challenges is assessed and expressed in terms of outcomes. The challenges to the system are given by the threats posed by potential proliferant States and sub-national adversaries on the nuclear systems. The characteristics of the Generation IV systems, both technical and institutional, are used to evaluate their response to the threats and determine their resistance against the proliferation threats and robustness against sabotage and theft threats. System response encompasses three main elements: (1) System Element Identification. The nuclear energy system is decomposed into smaller elements (subsystems) at a level amenable to further analysis. (2) Target Identification and Categorization. A systematic process is used to identify and select representative targets for different categories of pathways, within each system element, that actors (proliferant States or adversaries) might choose to use or attack. (3) Pathway Identification and Refinement. Pathways are defined as potential sequences of events and actions followed by the proliferant State or adversary to achieve its objectives (proliferation, theft or sabotage). For each target, individual pathway segments are developed through a systematic process, analyzed at a high level, and screened where possible. Segments are connected into full pathways and analyzed in detail. The outcomes of the system response are expressed in terms of PR&PP measures. Measures are high-level characteristics of a pathway that include information important to the evaluation methodology users and to the decisions of a proliferant State or adversary. They are first evaluated for segments and then aggregated for complete pathways. Results are aggregated as appropriate to permit pathway comparisons and system assessment. The paper highlights the current achievements in the development of the Proliferation Resistance and Physical Protection Evaluation Methodology. The way forward is also briefly presented together with some conclusions.

BARI, R.; ET AL.

2006-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Evaluation Methodology For Proliferation Resistance And Physical Protection Of Generation IV Nuclear Energy Systems: An Overview  

SciTech Connect (OSTI)

This paper provides an overview of the methodology approach developed by the Generation IV International Forum Expert Group on Proliferation Resistance & Physical Protection for evaluation of Proliferation Resistance and Physical Protection robustness of Generation IV nuclear energy systems options. The methodology considers a set of alternative systems and evaluates their resistance or robustness to a collection of potential threats. For the challenges considered, the response of the system to these challenges is assessed and expressed in terms of outcomes. The challenges to the system are given by the threats posed by potential proliferant States and sub-national adversaries on the nuclear systems. The characteristics of the Generation IV systems, both technical and institutional, are used to evaluate their response to the threats and determine their resistance against the proliferation threats and robustness against sabotage and theft threats. System response encompasses three main elements: 1.System Element Identification. The nuclear energy system is decomposed into smaller elements (subsystems) at a level amenable to further analysis. 2.Target Identification and Categorization. A systematic process is used to identify and select representative targets for different categories of pathways, within each system element, that actors (proliferant States or adversaries) might choose to use or attack. 3.Pathway Identification and Refinement. Pathways are defined as potential sequences of events and actions followed by the proliferant State or adversary to achieve its objectives (proliferation, theft or sabotage). For each target, individual pathway segments are developed through a systematic process, analyzed at a high level, and screened where possible. Segments are connected into full pathways and analyzed in detail. The outcomes of the system response are expressed in terms of PR&PP measures. Measures are high-level characteristics of a pathway that include information important to the evaluation methodology users and to the decisions of a proliferant State or adversary. They are first evaluated for segments and then aggregated for complete pathways. Results are aggregated as appropriate to permit pathway comparisons and system assessment. The paper highlights the current achievements in the development of the Proliferation Resistance and Physical Protection Evaluation Methodology. The way forward is also briefly presented together with some conclusions.

T. Bjornard; R. Bari; R. Nishimura; P. Peterson; J. Roglans; D. Bley; J. Cazalet; G.G.M. Cojazzi; P. Delaune; M. Golay; G. Rendad; G. Rochau; M. Senzaki; I. Therios; M. Zentner

2006-05-01T23:59:59.000Z

402

Thermal performance of typical light frame walls with reflective surface insulations  

SciTech Connect (OSTI)

A series of tests were conducted in a guarded hotbox to evaluate the thermal performance (R-value) of wall constructions typical of light-frame buildings that are commonly used in agricultural applications. The systems were insulated with either a commercially available foil-faced bubble pack material (FFBP) or foil-faced polyisocyanurate (PIR) foam board. Tests were conducted under two different temperature conditions, chosen to be representative of a midwestern winter and summer. This paper reports temperatures of the surfaces bounding the reflective airspaces measured and the R-value calculated. These data were used in the ASHRAE series/parallel calculations and the resultant R-value was compared to the measured R-value. Agreement was usually better than 10%.

Miller, R.G. (Jim Walter Research Corp., St. Petersburg, FL (US)); Riskowski, G.L.; Christianson, L.L. (Agricultural Engineering Dept., Univ. of Illinois at Urbana-Champaign, IL (US))

1989-01-01T23:59:59.000Z

403

Weather data analysis based on typical weather sequence analysis. Application: energy building simulation  

E-Print Network [OSTI]

In building studies dealing about energy efficiency and comfort, simulation software need relevant weather files with optimal time steps. Few tools generate extreme and mean values of simultaneous hourly data including correlation between the climatic parameters. This paper presents the C++ Runeole software based on typical weather sequences analysis. It runs an analysis process of a stochastic continuous multivariable phenomenon with frequencies properties applied to a climatic database. The database analysis associates basic statistics, PCA (Principal Component Analysis) and automatic classifications. Different ways of applying these methods will be presented. All the results are stored in the Runeole internal database that allows an easy selection of weather sequences. The extreme sequences are used for system and building sizing and the mean sequences are used for the determination of the annual cooling loads as proposed by Audrier-Cros (Audrier-Cros, 1984). This weather analysis was tested with the datab...

David, Mathieu; Garde, Francois; Boyer, Harry

2014-01-01T23:59:59.000Z

404

Capacity Value of PV and Wind Generation in the NV Energy System  

SciTech Connect (OSTI)

Calculation of photovoltaic (PV) and wind power capacity values is important for estimating additional load that can be served by new PV or wind installations in the electrical power system. It also is the basis for assigning capacity credit payments in systems with markets. Because of variability in solar and wind resources, PV and wind generation contribute to power system resource adequacy differently from conventional generation. Many different approaches to calculating PV and wind generation capacity values have been used by utilities and transmission operators. Using the NV Energy system as a study case, this report applies peak-period capacity factor (PPCF) and effective load carrying capability (ELCC) methods to calculate capacity values for renewable energy sources. We show the connection between the PPCF and ELCC methods in the process of deriving a simplified approach that approximates the ELCC method. This simplified approach does not require generation fleet data and provides the theoretical basis for a quick check on capacity value results of PV and wind generation. The diminishing return of capacity benefit as renewable generation increases is conveniently explained using the simplified capacity value approach.

Lu, Shuai; Diao, Ruisheng; Samaan, Nader A.; Etingov, Pavel V.

2014-03-21T23:59:59.000Z

405

An Analysis of the Effects of Photovoltaic Energy Systems on Residential Selling Prices in California.  

SciTech Connect (OSTI)

An increasing number of homes with existing photovoltaic (PV) energy systems have sold in the U.S., yet relatively little research exists that estimates the marginal impacts of those PV systems on the sales price. A clearer understanding of these effects might influence the decisions of homeowners, home buyers and PV home builders. This research analyzes a large dataset of California homes that sold from 2000 through mid-2009 with PV installed. Across a large number of hedonic and repeat sales model specifications and robustness tests, the analysis finds strong evidence that homes with PV systems sold for a premium over comparable homes without. The effects range, on average, from approximately $3.9 to $6.4 per installed watt (DC), with most models coalescing near $5.5/watt, which corresponds to a premium of approximately $17,000 for a 3,100 watt system. The research also shows that, as PV systems age, the premium enjoyed at the time of home sale decreases. Additionally, existing homes with PV systems are found to have commanded a larger sales price premium than new homes with similarly sized PV systems. Reasons for this discrepancy are suggested, yet further research is warranted in this area as well as a number of other areas that are highlighted.

Cappers, Peter; Wiser, Ryan; Thayer, Mark; Hoen, Ben

2011-04-12T23:59:59.000Z

406

Heat-pump-centered integrated community energy systems: system development summary  

SciTech Connect (OSTI)

An introduction to district heating systems employing heat pumps to enable use of low-temperature energy sources is presented. These systems operate as thermal utilities to provide space heating and may also supply space cooling, service-water heating, and other thermal services. Otherwise-wasted heat from industrial and commercial processes, natural sources including solar and geothermal heat, and heat stored on an annual cycle from summer cooling may be effectively utilized by the systems described. These sources are abundant, and their use would conserve scarce resources and reduce adverse environmental impacts. More than one-quarter of the energy consumed in the United States is used to heat and cool buildings and to heat service water. Natural gas and oil provide approximately 83% of this energy. The systems described show potential to reduce net energy consumption for these services by 20 to 50% and to allow fuel substitution with less-scarce resources not practical in smaller, individual-building systems. Seven studies performed for the system development phase of the Department of Energy's Heat-Pump-Centered Integrated Community Energy Systems Project and to related studies are summarized. A concluding chapter tabulates data from these separately published studies.

Calm, J.M.

1980-02-01T23:59:59.000Z

407

Solar energy system performance evaluation - final report for Honeywell OTS 45, Salt River Project, Phoenix, Arizona  

SciTech Connect (OSTI)

This report describes the operation and technical performance of the Solar Operational Test Site (OTS 45) at Salt River Project in Phoenix, Arizona, based on the analysis of data collected between April 1981 and March 31, 1982. The following topics are discussed: system description, performance assessment, operating energy, energy savings, system maintenance, and conclusions. The solar energy system at OTS 45 is a hydronic heating and cooling system consisting of 8208 square feet of liquid-cooled flat-plate collectors; a 2500-gallon thermal storage tank; two 25-ton capacity organic Rankine-cycle-engine-assisted water chillers; a forced-draft cooling tower; and associated piping, pumps, valves, controls and heat rejection equipment. The solar system has eight basic modes of operation and several combination modes. The system operation is controlled automatically by a Honeywell-designed microprocessor-based control system, which also provides diagnostics. Based on the instrumented test data monitored and collected during the 8 months of the Operational Test Period, the solar system collected 1143 MMBtu of thermal energy of the total incident solar energy of 3440 MMBtu and provided 241 MMBtu for cooling and 64 MMBtu for heating. The projected net annual electrical energy savings due to the solar system was approximately 40,000 kWh(e).

Mathur, A K

1983-09-01T23:59:59.000Z

408

Generation IV Nuclear Energy Systems Ten-Year Program Plan Fiscal Year 2005, Volume 1  

SciTech Connect (OSTI)

As reflected in the U.S. ''National Energy Policy'', nuclear energy has a strong role to play in satisfying our nation's future energy security and environmental quality needs. The desirable environmental, economic, and sustainability attributes of nuclear energy give it a cornerstone position, not only in the U.S. energy portfolio, but also in the world's future energy portfolio. Accordingly, on September 20, 2002, U.S. Energy Secretary Spencer Abraham announced that, ''The United States and nine other countries have agreed to develop six Generation IV nuclear energy concepts''. The Secretary also noted that the systems are expected to ''represent significant advances in economics, safety, reliability, proliferation resistance, and waste minimization''. The six systems and their broad, worldwide research and development (R&D) needs are described in ''A Technology Roadmap for Generation IV Nuclear Energy Systems'' (hereafter referred to as the Generation IV Roadmap). The first 10 years of required U.S. R&D contributions to achieve the goals described in the Generation IV Roadmap are outlined in this Program Plan.

None

2005-03-01T23:59:59.000Z

409

Review of legal and institutional issues in the use of decentralized solar energy systems  

SciTech Connect (OSTI)

The legal and institutional issues involved in the use of decentralized solar energy systems are examined for the purpose of advising government planners and policymakers, the solar industry, solar researchers, and prospective solar users of present and potential impediments and incentives to solar commercialization. This information was gathered primarily through a comprehensive literature review, with supplementary data provided through interviews with representatives of organizations active in the solar field. Five major issue areas were identified in the course of this study: (1) prohibitions on the use of solar equipment, (2) regulation of the production and placement of solar systems, (3) access to sunlight, (4) financial incentives and impediments to the use of solar technologies, and (5) the public utility-solar user interface. Each can be important in its impacts on the incidence of solar usage. The major actors involved with the issues identified above represent both the private and public sectors. Important private sector participants include solar manufacturers and installers, labor unions, lending institutions, utility companies, solar users themselves, and other community property owners. In the public sector, local, state, and federal governments are all capable of acting in ways that can influence the solar commercialization effort. Implementation options are available for all levels of government seeking to take an active role in addressing the previously mentioned legal and institutional issues. The appropriate actions will vary from federal to state to local governments, but each level can be important in removing existing barriers and creating new incentives for solar use.

Schweitzer, M.

1980-04-01T23:59:59.000Z

410

Summary Report of the INL-JISEA Workshop on Nuclear Hybrid Energy Systems  

SciTech Connect (OSTI)

The Institute for Nuclear Energy Science and Technology (INEST) and the Joint Institute for Strategic Energy Analysis (JISEA) co-sponsored an international workshop to identify research topics important in advancing the potential use of hybrid systems with a specific focus on nuclear-renewable hybrid systems. The workshop included presentations ranging from energy challenges and research and development directions being pursued by nations to multiple options for hybrid systems. Those options include one that is being commercialized to other opportunities and analysis results quantifying them. The workshop also involved two breakout sessions--one focused on thermal energy management issues especially at unit-operation scale and the second focused on system operations issues including system controls, regulatory issues, technical and economic analysis, and market challenges. A discussion involving the full group focused on more general issues such as societal involvement and participation. Key criteria for selecting hybrid energy system projects and metrics for comparing them were also identified by the full group.

Antkowiak, M.; Ruth, M.; Boardman, R.; Bragg-Sitton, S.; Cherry, R.; Shunn, L.

2012-07-01T23:59:59.000Z

411

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies within Energy Systems  

E-Print Network [OSTI]

Understanding the Impact of Large-Scale Penetration of Micro Combined Heat & Power Technologies of Micro Combined Heat & Power Technologies within Energy Systems by Karen de los Ángeles Tapia for this purpose. Co-generation of electricity and heat at the residential level, known as micro

Catholic University of Chile (Universidad Católica de Chile)

412

Energy systems programs funded by the Assistant Secretary for Environment, Safety and Health: FY 1993--FY 1994  

SciTech Connect (OSTI)

This document presents an overview of work at Martin Marietta Energy Systems, Inc., (Energy Systems) during FY 1993--FY 1994 that was funded by the Department of Energy`s (DOE`s) Assistant Secretary for Environment, Safety and Health (ASEH). To illustrate the programmatic breadth of Energy Systems and to establish the context within which this work was accomplished, this document also includes representative descriptions of ASEH-related work at Energy Systems done for other sponsors. Activities for ASEH cover a wide variety of subjects that are geared towards the environmental, safety, and health aspects of DOE operations. Subjects include the following: environmental compliance, environmental guidance, environmental audits, NEPA oversight, epidemiology and health surveillance, transportation and packaging safety, safety and quality assurance; technical standards, performance indicators, occurrence reporting, health physics instrumentation, risk management, security evaluations, and medical programs. The technical support section describes work in progress for ASEH, including specific program accomplishments. The work for others section describes work for non-ASEH sponsors that reinforces and supplements the ASEH work. Appendix A includes a list of FY 1993--FY 1994 publications related to the ASEH work.

Buttram, A.W. [ed.

1994-12-31T23:59:59.000Z

413

Meeting of The New York State Sustainability Education Working Group Syracuse Center of Excellence In Environmental and Energy Systems  

E-Print Network [OSTI]

Meeting of The New York State Sustainability Education Working Group Syracuse Center of Excellence In Environmental and Energy Systems 727 East Washington Street Syracuse, New York April 1, 2012 RECOMMENDED ACTION sustainably and why it is essential to do so, individually and collectively. And, every New York school

Linsley, Braddock K.

414

Solar energy potential atlas for planning energy system off-grid electrification in the Republic of Djibouti  

E-Print Network [OSTI]

1 Solar energy potential atlas for planning energy system off-grid electrification in the Republic solar resource can therefore be an interesting mean to produce energy where it is consumed. The aimWh/m². Furthermore, the solar radiation reaching Djibouti corresponded to 20 000 times the total yearly energy

Boyer, Edmond

415

GECCO Ocean Energy System Luis Maristany, Nicole Waters, Billy W. Wells Jr., Mario Suarez, Richard Gestewitz, Alexej Wiest,  

E-Print Network [OSTI]

GECCO Ocean Energy System Luis Maristany, Nicole Waters, Billy W. Wells Jr., Mario Suarez, Richard and to invent ways of harvesting these energies by designing new systems. The ocean is a major resource for all Operation) is a wave energy converter that extracts kinetic energy from ocean waves using a rugged

Wood, Stephen L.

416

Co-Designing Sustainable Communities: The Identification and Incorporation of Social Performance Metrics in Native American Sustainable Housing and Renewable Energy System Design  

E-Print Network [OSTI]

Development of Sustainable and Renewable Energy Systems formodels related to sustainable, energy efficient buildingof Water and Energy Efficient Sustainable Housing with the

Shelby, Ryan

2013-01-01T23:59:59.000Z

417

TOPIC TIME LOCATION CATEGORY TITLE AUTHORS INSTITUTION Advanced Energy Systems 10:15 to 10:35 AM BA1180 CSME  

E-Print Network [OSTI]

microorganisms P. Graham, D.Sinton University of Toronto Advanced Energy Systems 2:35 to 2:55 PM BA1180 CSME

418

Mac configuration management at the Los Alamos National Laboratory  

SciTech Connect (OSTI)

The Los Alamos National Laboratory (LANL) had a need for central configuration management of non-Windows computers. LANL has three to five thousand Macs and an equal number of Linux based systems. The primary goal was to be able to inventory all non-windows systems and patch Mc OS X systems. LANL examined a number of commercial and open source solutions and ultimately selected Puppet. This paper will discuss why we chose Puppet, how we implemented it, and some lessons we learned along the way.

Marcus, Allan B [Los Alamos National Laboratory

2010-01-01T23:59:59.000Z

419

Quasi-isodynamic Configuration With N = 12 and High {beta}  

SciTech Connect (OSTI)

Results of an optimization toward quasi-isodynamicity for a stellarator with a comparatively large number of periods, N = 12, are presented. The following set of physics properties to be achieved was used: 1) good long-time collisionless confinement of {alpha}-particles; 2) small neoclassical transport in the 1/{nu} regime; 3) small bootstrap current; 4) high stability-{beta} limit. As a result, the boundary magnetic surface of a configuration is found that satisfies the above requirements for <{beta}> {approx_equal} 20%.

Mikhailov, M. I.; Isaev, M. Yu.; Subbotin, A. A.; Shafranov, V. D. [Russian Research Centre 'Kurchatov Institute', Moscow (Russian Federation); Nuehrenberg, C.; Nuehrenberg, J.; Zille, R. [Max-Planck-Institut fuer Plasmaphysik, IPP-EURATOM Association (Germany); Cooper, A. [CRPP, Association Euratom-Confederation Suisse, EPFL, Lausanne (Switzerland)

2006-11-30T23:59:59.000Z

420

EIA - Natural Gas Pipeline Network - Network Configuration & System Design  

U.S. Energy Information Administration (EIA) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data CenterFranconia,(Million Barrels) Crude Oil Reserves in Nonproducing Reservoirs U.S. Department of EnergyD e sNetwork Configuration

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Vortex configurations of bosons in an optical lattice  

SciTech Connect (OSTI)

The single-vortex problem in a strongly correlated bosonic system is investigated self-consistently within the mean-field theory of the Bose-Hubbard model. Near the superfluid-Mott-insulator transition, the vortex core has a tendency toward the Mott-insulating phase, with the core particle density approaching the nearest commensurate value. If the nearest-neighbor repulsion exists, the charge-density wave order may develop locally in the core. The evolution of the vortex configuration from the strong- to weak-coupling regions is studied. This phenomenon can be observed in systems of rotating ultracold atoms in optical lattices and Josephson-junction arrays.

Wu Congjun; Zhang Shoucheng [Department of Physics, McCullough Building, Stanford University, Stanford, California 94305-4045 (United States); Chen Handong [Department of Applied Physics, McCullough Building, Stanford University, Stanford, California 94305-4045 (United States); Hu Jiangpiang [Department of Physics and Astronomy, University of California, Los Angeles, California 90095-1547 (United States)

2004-04-01T23:59:59.000Z

422

Rotational stability of a long field-reversed configuration  

SciTech Connect (OSTI)

Rotationally driven modes of long systems with dominantly axial magnetic field are considered. We apply the incompressible model and order axial wavenumber small. A recently developed gyro-viscous model is incorporated. A one-dimensional equilibrium is assumed, but radial profiles are arbitrary. The dominant toroidal (azimuthal) mode numbers ?=1 and ?=2 modes are examined for a variety of non-reversed (B) and reversed profiles. Previous results for both systems with rigid rotor equilibria are reproduced. New results are obtained by incorporation of finite axial wavenumber and by relaxing the assumption of rigid electron and ion rotation. It is shown that the frequently troublesome ?=2 field reversed configuration (FRC) mode is not strongly affected by ion kinetic effects (in contrast to non-reversed cases) and is likely stabilized experimentally only by finite length effects. It is also shown that the ?=1 wobble mode has a complicated behavior and is affected by a variety of configuration and profile effects. The rotationally driven ?=1 wobble is completely stabilized by strong rotational shear, which is anticipated to be active in high performance FRC experiments. Thus, observed wobble modes in these systems are likely not driven by rotation alone.

Barnes, D. C., E-mail: coronadocon@msn.com; Steinhauer, L. C. [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)] [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)

2014-02-15T23:59:59.000Z

423

Shaft Siting and Configuration for Flexible Operating Mode  

SciTech Connect (OSTI)

The purpose of this document as stated in the ''Technical Work Plan for Subsurface Design Section FY 01 Work Activities'' (CRWMS M&O 2001a, pg. 14) is to review and evaluate the most current concepts for shaft siting and configuration. The locations of the shaft sites will be evaluated in reference to the overall subsurface ventilation layout shown in Figure 1. The scope will include discussions on pad size requirements, shaft construction components such as collars, shaft stations, sumps, ground support and linings, head frames, fan ducting and facility equipping. In addition to these, shaft excavation methodologies and integration with the overall subsurface construction schedule will be described. The Technical Work Plan (TWP), (CRWMS M&O 2001a), for this document has been prepared in accordance with AP-2.21Q, ''Quality Determinations and Planning for Scientific, Engineering and Regulatory Compliance Activities''. This document will be prepared in accordance with AP-3.10Q, ''Analysis and Models''. This document contributes to Site Recommendation (SR). The intended use of this document is to provide an analysis for shaft siting and configuration criteria for subsequent construction. This document identifies preliminary design concepts that should not be used for procurement, fabrication, or construction.

Robert Boutin

2001-08-02T23:59:59.000Z

424

Electron cyclotron emission spectrometry on the Tokamak a Configuration Variable  

SciTech Connect (OSTI)

Electron cyclotron emission (ECE) measurements are an important component of the diagnostic suite on the Tokamak a Configuration Variable (TCV) [F. Hoffman et al., Plasma Phys. Controlled Fusion 36, B277 (1994)]. A recently installed, 24-channel dual-conversion heterodyne radiometer covering the radio frequency range 65-100 GHz and viewing from the low-field side (LFS) of the tokamak greatly enhances the system and, in combination with an existing radiometer viewing from the high-field side (HFS), allows simultaneous measurements of emission from the HFS and LFS. In addition, the new radiometer has multiple lines of sight that can receive the emission perpendicular to the toroidal magnetic field as well as with a finite k{sub parallel} (wave vector parallel to magnetic field). Such flexibility allows the LFS radiometer to make standard measurements of thermal emission and nonstandard measurements of nonthermal, anisotropic emission. The toroidal line of sight allows access to overdense plasma via mode converted emission. The enhanced ECE diagnostic is described and examples of measurements made in various configurations are presented.

Klimanov, I.; Porte, L.; Alberti, S.; Blanchard, P.; Fasoli, A.; Goodman, T.P. [Centre de Recherches en Physique des Plasmas (CRPP), Association EURATOM-Confederation Suisse, Ecole Polytechnique Federale de Lausanne (EPFL), CH-1015, Lausanne (Switzerland)

2005-09-15T23:59:59.000Z

425

Electrostatic spherically symmetric configurations in gravitating nonlinear electrodynamics  

SciTech Connect (OSTI)

We perform a study of the gravitating electrostatic spherically symmetric (G-ESS) solutions of Einstein field equations minimally coupled to generalized nonlinear Abelian gauge models in three space dimensions. These models are defined by Lagrangian densities which are general functions of the gauge field invariants, restricted by some physical conditions of admissibility. They include the class of nonlinear electrodynamics supporting electrostatic spherically symmetric (ESS) nontopological soliton solutions in absence of gravity. We establish that the qualitative structure of the G-ESS solutions of admissible models is fully characterized by the asymptotic and central-field behaviors of their ESS solutions in flat space (or, equivalently, by the behavior of the Lagrangian densities in vacuum and on the point of the boundary of their domain of definition, where the second gauge invariant vanishes). The structure of these G-ESS configurations for admissible models supporting divergent-energy ESS solutions in flat space is qualitatively the same as in the Reissner-Nordstroem case. In contrast, the G-ESS configurations of the models supporting finite-energy ESS solutions in flat space exhibit new qualitative features, which are discussed in terms of the Arnowitt-Deser-Misner mass, the charge, and the soliton energy. Most of the results concerning well-known models, such as the electrodynamics of Maxwell, Born-Infeld, and the Euler-Heisenberg effective Lagrangian of QED, minimally coupled to gravitation, are shown to be corollaries of general statements of this analysis.

Diaz-Alonso, J.; Rubiera-Garcia, D. [LUTH, Observatoire de Paris, CNRS, , USAUniversite Paris Diderot, 5 Place Jules Janssen, 92190 Meudon (France) and Departamento de Fisica, Universidad de Oviedo, Avda. Calvo Sotelo 18, E-33007 Oviedo, Asturias (Spain)

2010-03-15T23:59:59.000Z

426

Snowflake divertor configuration studies for NSTX-Upgrade  

SciTech Connect (OSTI)

Snowflake divertor experiments in NSTX provide basis for PMI development toward NSTX-Upgrade. Snowflake configuration formation was followed by radiative detachment. Significant reduction of steady-state divertor heat flux observed in snowflake divertor. Impulsive heat loads due to Type I ELMs are partially mitigated in snowflake divertor. Magnetic control of snowflake divertor configuration is being developed. Plasma material interface development is critical for NSTX-U success. Four divertor coils should enable flexibility in boundary shaping and control in NSTX-U. Snowflake divertor experiments in NSTX provide good basis for PMI development in NSTX-Upgrade. FY 2009-2010 snowflake divertor experiments in NSTX: (1) Helped understand control of magnetic properties; (2) Core H-mode confinement unchanged; (3) Core and edge carbon concentration reduced; and (4) Divertor heat flux significantly reduced - (a) Steady-state reduction due to geometry and radiative detachment, (b) Encouraging results for transient heat flux handling, (c) Combined with impurity-seeded radiative divertor. Outlook for snowflake divertor in NSTX-Upgrade: (1) 2D fluid modeling of snowflake divertor properties scaling - (a) Edge and divertor transport, radiation, detachment threshold, (b) Compatibility with cryo-pump and lithium conditioning; (2) Magnetic control development; and (3) PFC development - PFC alignment and PFC material choice.

Soukhanovskii, V A

2011-11-12T23:59:59.000Z

427

Typical atmospheric aerosol behavior at the Cherenkov Telescope Array candidate sites in Argentina  

E-Print Network [OSTI]

Aerosols from natural and antropogenic sources are one of the atmospheric components that have the largest spacial-temporal variability, depending on the type (land or ocean) surface, human activity and climatic conditions (mainly temperature and wind). Since Cherenkov photons generated by the incidence of a primary ultraenergetic cosmic gamma photon have a spectral intensity distribution concentrated in the UV and visible ranges [Hillas AM. Space Science Reviews, 75, 17-30, 1996], it is important to know the aerosol concentration and its contribution to atmospheric radiative transfer. We present results of this concentration measured in typical rather calm (not windy) days at San Antonio de los Cobres (SAC) and El Leoncito/CASLEO proposed Argentinean Andes range sites for the placement of the Cherenkov Telescope Array (CTA). In both places, the aerosol concentration has a peak in the 2.5-5.0$\\mu$m range of the mean aerosol diameter and a very low mean total concentration of 0.097$\\mu$g/m$^3$ (0.365$\\mu$g/m$^...

Piacentini, Rubén D; Micheletti, María I; Salum, Graciela M; Maya, Javier; Mancilla, Alexis; García, Beatriz

2013-01-01T23:59:59.000Z

428

LBB evaluation for a typical Japanese PWR primary loop by using the US NRC approved methods  

SciTech Connect (OSTI)

The regulatory requirements for postulated pipe ruptures have changed significantly since the first nuclear plants were designed. The Leak-Before-Break (LBB) methodology is now accepted as a technically justifiable approach for eliminating postulation of double-ended guillotine breaks (DEGB) in high energy piping systems. The previous pipe rupture design requirements for nuclear power plant applications are responsible for all the numerous and massive pipe whip restraints and jet shields installed for each plant. This results in significant plant congestion, increased labor costs and radiation dosage for normal maintenance and inspection. Also the restraints increase the probability of interference between the piping and supporting structures during plant heatup, thereby potentially impacting overall plant reliability. The LBB approach to eliminate postulating ruptures in high energy piping systems is a significant improvement to former regulatory methodologies, and therefore, the LBB approach to design is gaining worldwide acceptance. However, the methods and criteria for LBB evaluation depend upon the policy of individual country and significant effort continues towards accomplishing uniformity on a global basis. In this paper the historical development of the U.S. LBB criteria will be traced and the results of an LBB evaluation for a typical Japanese PWR primary loop applying U.S. NRC approved methods will be presented. In addition, another approach using the Japanese LBB criteria will be shown and compared with the U.S. criteria. The comparison will be highlighted in this paper with detailed discussion.

Swamy, S.A.; Bhowmick, D.C.; Prager, D.E. [Westinghouse Nuclear Technology Division, Pittsburgh, PA (United States)

1997-04-01T23:59:59.000Z

429

Typical, finite baths as a means of exact simulation of open quantum systems  

E-Print Network [OSTI]

There is presently considerable interest in accurately simulating the evolution of open systems for which Markovian master equations fail. Examples are systems that are time-dependent and/or strongly damped. A number of elegant methods have now been devised to do this, but all use a bath consisting of a continuum of harmonic oscillators. While this bath is clearly appropriate for, e.g., systems coupled to the EM field, it is not so clear that it is a good model for generic many-body systems. Here we explore a different approach to exactly simulating open-systems: using a finite bath chosen to have certain key properties of thermalizing many-body systems. To explore the numerical resources required by this method to approximate an open system coupled to an infinite bath, we simulate a weakly damped system and compare to the evolution given by the relevant Markovian master equation. We obtain the Markovian evolution with reasonable accuracy by using an additional averaging procedure, and elucidate how the typicality of the bath generates the correct thermal steady-state via the process of "eigenstate thermalization".

Luciano Silvestri; Kurt Jacobs; Vanja Dunjko; Maxim Olshanii

2014-04-09T23:59:59.000Z

430

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432-2000  

E-Print Network [OSTI]

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432 "Import". #12;Configure Microsoft Outlook 2011 for Mac HMS Help Desk Outlook 2011 for Mac HMS Help Desk: (617) 432-2000 3 · Select

Blackwell, Keith

431

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432-2000  

E-Print Network [OSTI]

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432 2011 for Mac HMS Help Desk: (617) 432-2000 2 · Create a new". #12;Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432

Blackwell, Keith

432

Steady-state and equilibrium vortex configurations, transitions, and evolution in a mesoscopic superconducting cylinder  

E-Print Network [OSTI]

that the system passes through nearly metastable intermediate configurations while seeking the final minimum-energy steady state consistent with the square symmetry of the sample. An efficient scheme to determine the equilibrium vortex configuration in a...

Kim, S.; Hu, Chia-Ren; Andrews, MJ.

2004-01-01T23:59:59.000Z

433

Performance evaluation of configurable arrays with mesh interconnections and wormhole routing  

E-Print Network [OSTI]

configuration of the system, configuration must take place to map their domains. Building a parallel system is very expensive, and hence, we need solutions which allow to solve such problems on existing systems instead of designing a whole new system...

Krishnamoorthy, Deviusha

1997-01-01T23:59:59.000Z

434

An Experimental and Analytical Evaluation of Wall And Window Retrofit Configurations: Supporting the Residential Retrofit Best Practices Guide  

SciTech Connect (OSTI)

A Retrofit Best Practices Guide was developed to encourage homeowners to consider energy conservation issues whenever they modify their siding or windows. In support of this guide, an experimental program was implemented to measure the performance of a number of possible wall siding and window retrofit configurations. Both thermal and air-leakage measurements were made for a 2.4 x 2.4 m (8 x 8 ft) wall section with and without a 0.9 x 1.2 m (3 x 4 ft) window. The windows tested were previously well-characterized at a dedicated window test facility. A computer model was also used to provide information for the Best Practices Guide. The experimental data for walls and windows were used in conjunction with this model to estimate the total annual energy savings for several typical houses in a number of different locations.

Stovall, Therese K [ORNL; Petrie, Thomas [ORNL; Kosny, Jan [ORNL; Childs, Phillip W [ORNL; Atchley, Jerald Allen [ORNL; Hulvey, Kimberly D [ORNL

2007-11-01T23:59:59.000Z

435

An Analysis of the Effects of Residential Photovoltaic Energy Systems on Home Sales Prices in California  

SciTech Connect (OSTI)

An increasing number of homes in the U.S. have sold with photovoltaic (PV) energy systems installed at the time of sale, yet relatively little research exists that estimates the marginal impacts of those PV systems on home sale prices. A clearer understanding of these possible impacts might influence the decisions of homeowners considering the installation of a PV system, homebuyers considering the purchase of a home with PV already installed, and new home builders considering including PV as an optional or standard product on their homes. This research analyzes a large dataset of California homes that sold from 2000 through mid-2009 with PV installed. It finds strong evidence that homes with PV systems sold for a premium over comparable homes without PV systems during this time frame. Estimates for this premium expressed in dollars per watt of installed PV range, on average, from roughly $4 to $5.5/watt across a large number of hedonic and repeat sales model specifications and robustness tests. When expressed as a ratio of the sales price premium of PV to estimated annual energy cost savings associated with PV, an average ratio of 14:1 to 19:1 can be calculated; these results are consistent with those of the more-extensive existing literature on the impact of energy efficiency on sales prices. When the data are split among new and existing homes, however, PV system premiums are markedly affected. New homes with PV show premiums of $2.3-2.6/watt, while existing homes with PV show premiums of more than $6/watt. Reasons for this discrepancy are suggested, yet further research is warranted. A number of other areas where future research would be useful are also highlighted.

Hoen, Ben; Cappers, Peter; Wiser, Ryan; Thayer, Mark

2011-04-19T23:59:59.000Z

436

Solar energy system performance evaluation: final report for Honeywell OTS 41, Shenandoah (Newnan), Georgia  

SciTech Connect (OSTI)

The operation and technical performance of the Solar Operational Test Site (OTS 41) located at Shenandoah, Georgia, are described, based on the analysis of data collected between January and August 1981. The following topics are discussed: system description, performance assessment, operating energy, energy savings, system maintenance, and conclusions. The solar energy system at OTS 41 is a hydronic heating and cooling system consisting of 702 square feet of liquid-cooled flat-plate collectors; a 1000-gallon thermal storage tank; a 3-ton capacity organic Rankine-cycle-engine-assisted air conditioner; a water-to-air heat exchanger for solar space heating; a finned-tube coil immersed in the storage tank to preheat water for a gas-fired hot water heater; and associated piping, pumps, valves, and controls. The solar system has six basic modes of operation and several combination modes. The system operation is controlled automatically by a Honeywell-designed microprocessor-based control system, which also provides diagnostics. Based on the instrumented test data monitored and collected during the 7 months of the Operational Test Period, the solar system collected 53 MMBtu of thermal energy of the total incident solar energy of 219 MMBtu and provided 11.4 MMBtu for cooling, 8.6 MMBtu for heating, and 8.1 MMBtu for domestic hot water. The projected net annual energy savings due to the solar system were approximately 50 MMBtu of fossil energy (49,300 cubic feet of natural gas) and a loss of 280 kWh(e) of electrical energy.

Mathur, A K; Pederson, S

1982-08-01T23:59:59.000Z

437

MANAGING THE CONFIGURATION OF INFORMATION SYSTEMS WITH A FOCUS ON SECURITY  

E-Print Network [OSTI]

a well-defined process for managing and controlling secure system configurations, and for managing risks, and the integration of security into the configuration management process throughout the life cycle of the system for establishing secure configurations in information systems; flow charts for SecCM processes and activities

438

Configuration Management Plan for Tank Farm Restoration and Safe Operations Project W-314  

SciTech Connect (OSTI)

The Configuration Management Plan for Project W-314 describes the systems, processes and procedures for implementation of applicable configuration management practices described in HNF-0842, Volume 111, Section 3.1, ''Configuration Management Implementation''. This plan is tailored specifically for use by Project W-314.

MCGREW, D.L.

2000-04-19T23:59:59.000Z

439

Assessing the density functional theory-based multireference configuration interaction (DFT/MRCI) method for transition metal complexes  

SciTech Connect (OSTI)

We report an assessment of the performance of density functional theory-based multireference configuration interaction (DFT/MRCI) calculations for a set of 3d- and 4d-transition metal (TM) complexes. The DFT/MRCI results are compared to published reference data from reliable high-level multi-configurational ab initio studies. The assessment covers the relative energies of different ground-state minima of the highly correlated CrF{sub 6} complex, the singlet and triplet electronically excited states of seven typical TM complexes (MnO{sub 4}{sup ?}, Cr(CO){sub 6}, [Fe(CN){sub 6}]{sup 4?}, four larger Fe and Ru complexes), and the corresponding electronic spectra (vertical excitation energies and oscillator strengths). It includes comparisons with results from different flavors of time-dependent DFT (TD-DFT) calculations using pure, hybrid, and long-range corrected functionals. The DFT/MRCI method is found to be superior to the tested TD-DFT approaches and is thus recommended for exploring the excited-state properties of TM complexes.

Escudero, Daniel, E-mail: escudero@kofo.mpg.de, E-mail: thiel@kofo.mpg.de; Thiel, Walter, E-mail: escudero@kofo.mpg.de, E-mail: thiel@kofo.mpg.de [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany)] [Max-Planck-Institut für Kohlenforschung, Kaiser-Wilhelm-Platz 1, 45470 Mülheim an der Ruhr (Germany)

2014-05-21T23:59:59.000Z

440

Critical Path Method (CPM) Scheduling, Basic Engineering, and Project Approach for Typical Substation Engineering-Procurement-Construction (EPC) Project  

E-Print Network [OSTI]

This Field Project provides an overview of the typical substation Engineering-Procurement-Construction (EPC) project delivery method, the work breakdown structure, activities and sequences in the Critical Path Method (CPM) schedule, basic substation...

Jamir, Dewan R.

2006-05-19T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Passive gust load alleviation through bend-twist coupling of composite beams on typical commercial airplane wings  

E-Print Network [OSTI]

The effects of bend-twist coupling on typical commercial airplane wings are evaluated. An analytical formulation of the orthotropic box beam bending stiffness matrix is derived by combining Euler-Bernoulli beam theory and ...

Gauthier Perron, Sébastien

2012-01-01T23:59:59.000Z

442

Diquark condensation effects on hot quark star configurations  

E-Print Network [OSTI]

The equation of state for quark matter is derived for a nonlocal, chiral quark model within the mean field approximation. We investigate the effects of a variation of the form factors of the interaction on the phase diagram of quark matter under the condition of beta-equilibrium and charge neutrality. Special emphasis is on the occurrence of a diquark condensate which signals a phase transition to color superconductivity and its effects on the equation of state. We calculate the quark star configurations by solving the Tolman- Oppenheimer- Volkoff equations and obtain for the transition from a hot, normal quark matter core of a protoneutron star to a cool diquark condensed one a release of binding energy of the order of Delta M c^2 ~ 10^{53} erg. We discuss the claim that this energy could serve as an engine for explosive phenomena.

Blaschke, David B; Grigorian, H

2004-01-01T23:59:59.000Z

443

Ionization detector, electrode configuration and single polarity charge detection method  

DOE Patents [OSTI]

An ionization detector, an electrode configuration and a single polarity charge detection method each utilize a boundary electrode which symmetrically surrounds first and second central interlaced and symmetrical electrodes. All of the electrodes are held at a voltage potential of a first polarity type. The first central electrode is held at a higher potential than the second central or boundary electrodes. By forming the first and second central electrodes in a substantially interlaced and symmetrical pattern and forming the boundary electrode symmetrically about the first and second central electrodes, signals generated by charge carriers are substantially of equal strength with respect to both of the central electrodes. The only significant difference in measured signal strength occurs when the charge carriers move to within close proximity of the first central electrode and are received at the first central electrode. The measured signals are then subtracted and compared to quantitatively measure the magnitude of the charge.

He, Zhong (Ann Arbor, MI)

1998-01-01T23:59:59.000Z

444

Ionization detector, electrode configuration and single polarity charge detection method  

DOE Patents [OSTI]

An ionization detector, an electrode configuration and a single polarity charge detection method each utilize a boundary electrode which symmetrically surrounds first and second central interlaced and symmetrical electrodes. All of the electrodes are held at a voltage potential of a first polarity type. The first central electrode is held at a higher potential than the second central or boundary electrodes. By forming the first and second central electrodes in a substantially interlaced and symmetrical pattern and forming the boundary electrode symmetrically about the first and second central electrodes, signals generated by charge carriers are substantially of equal strength with respect to both of the central electrodes. The only significant difference in measured signal strength occurs when the charge carriers move to within close proximity of the first central electrode and are received at the first central electrode. The measured signals are then subtracted and compared to quantitatively measure the magnitude of the charge. 10 figs.

He, Z.

1998-07-07T23:59:59.000Z

445

Mapping the location and configuration of nitrogen in diamond nanoparticles.  

SciTech Connect (OSTI)

Understanding how impurities such as nitrogen are included in diamond nanoparticles is expected to be important for use in future nanodevices, such as qubits for quantum computing. Most commercial diamond nanoparticles contain approximately 2-3% nitrogen, but it is difficult to determine experimentally whether it is located within the core or at the surface of the nanoparticles. Presented here are density functional tight-binding simulations examining the configuration and potential energy surface of substitutional nitrogen in diamond nanoparticles, directly comparing results of different sizes, shapes and surface chemistry. The results predict that nitrogen is metastable within the core of both hydrogenated and dehydrogenated particles, but that the binding energy, coordination and preferred location is dependent upon the structure of the nanoparticle as a whole.

Barnard, A. S.; Sternberg, M.; Center for Nanoscale Materials; Univ. of Oxford

2007-01-17T23:59:59.000Z

446

APPLICATION OF NONSPHERICAL FISSILE CONFIGURATION IN WASTE CONTAINERS AT SRS  

SciTech Connect (OSTI)

Transuranic (TRU) solid waste that has been generated as a result of the production of nuclear material for the United States defense program at the Savannah River Site (SRS) has been stored in more than 30,000 55-gallon drums and carbon steel boxes since 1953. Nearly two thirds of those containers have been processed and shipped to the Waste Isolation Pilot Plant. Among the containers assayed so far, the results indicate several drums with fissile inventories significantly higher (600-1000 fissile grams equivalent (FGE) {sup 239}Pu) than their original assigned values. While part of this discrepancy can be attributed to the past limited assay capabilities, human errors are believed to be the primary contributor. This paper summarizes the application of nonspherical fissile material configuration in waste containers, resulting in less restrictive mass and spacing limits, increased storage capacity, and several administrative controls for handling and storage of waste containers being modified without compromising safety.

Eghbali, D; Michelle Abney, M

2007-01-03T23:59:59.000Z

447

Cycle Configurations for a PBMR Steam and Electricity Production Plant  

SciTech Connect (OSTI)

The Pebble Bed Modular Reactor (PBMR) is an advanced helium-cooled, graphite moderated High Temperature Gas-cooled Reactor (HTGR) that is capable of multiple missions. The petrochemical industry requires the use of high temperature steam and electricity for their processes. Currently coal or natural gas is utilised for the generation of high temperature steam and electricity, which under-utilises natural resources and in the process emits CO{sub 2} into the atmosphere. This paper provides an overview of the PBMR product development path and discusses how steam production forms part of the future possibilities of the PBMR technology. Suitable cycle configurations for both process steam and electricity generation as required by petrochemical plants are discussed. (authors)

Matzner, Dieter; Kriel, Willem; Correia, Michael; Greyvenstein, Renee [PBMR - Pty - Ltd, Lake Buena Vista Building, 1267 Gordon Hood Avenue, Centurion, PO Box 9396, Centurion 0046 (South Africa)

2006-07-01T23:59:59.000Z

448

Configuration and technology implications of potential nuclear hydrogen system applications.  

SciTech Connect (OSTI)

Nuclear technologies have important distinctions and potential advantages for large-scale generation of hydrogen for U.S. energy services. Nuclear hydrogen requires no imported fossil fuels, results in lower greenhouse-gas emissions and other pollutants, lends itself to large-scale production, and is sustainable. The technical uncertainties in nuclear hydrogen processes and the reactor technologies needed to enable these processes, as well waste, proliferation, and economic issues must be successfully addressed before nuclear energy can be a major contributor to the nation's energy future. In order to address technical issues in the time frame needed to provide optimized hydrogen production choices, the Nuclear Hydrogen Initiative (NHI) must examine a wide range of new technologies, make the best use of research funding, and make early decisions on which technology options to pursue. For these reasons, it is important that system integration studies be performed to help guide the decisions made in the NHI. In framing the scope of system integration analyses, there is a hierarchy of questions that should be addressed: What hydrogen markets will exist and what are their characteristics? Which markets are most consistent with nuclear hydrogen? What nuclear power and production process configurations are optimal? What requirements are placed on the nuclear hydrogen system? The intent of the NHI system studies is to gain a better understanding of nuclear power's potential role in a hydrogen economy and what hydrogen production technologies show the most promise. This work couples with system studies sponsored by DOE-EE and other agencies that provide a basis for evaluating and selecting future hydrogen production technologies. This assessment includes identifying commercial hydrogen applications and their requirements, comparing the characteristics of nuclear hydrogen systems to those market requirements, evaluating nuclear hydrogen configuration options within a given market, and identifying the key drivers and thresholds for market viability of nuclear hydrogen options.

Conzelmann, G.; Petri, M.; Forsberg, C.; Yildiz, B.; ORNL

2005-11-05T23:59:59.000Z

449

Alternative configurations for the waste-handling building at the Yucca Mountain Repository  

SciTech Connect (OSTI)

Two alternative configurations of the waste-handling building have been developed for the proposed nuclear waste repository in tuff at Yucca Mountain, Nevada. One configuration is based on criteria and assumptions used in Case 2 (no monitored retrievable storage facility, no consolidation), and the other configuration is based on criteria and assumptions used in Case 5 (consolidation at the monitored retrievable storage facility) of the Monitored Retrievable Storage System Study for the Repository. Desirable waste-handling design concepts have been selected and are included in these configurations. For each configuration, general arrangement drawings, plot plans, block flow diagrams, and timeline diagrams are prepared.

NONE

1990-08-01T23:59:59.000Z

450

Integrated Energy System with Beneficial Carbon Dioxide (CO2) Use - Final Scientific/Technical Report  

SciTech Connect (OSTI)

This report presents an integrated energy system that combines the production of substitute natural gas through coal hydrogasification with an algae process for beneficial carbon dioxide (CO2) use and biofuel production (funded under Department of Energy (DOE) contract DE-FE0001099). The project planned to develop, test, operate and evaluate a 2 ton-per-day coal hydrogasification plant and 25-acre algae farm at the Arizona Public Service (APS) 1000 Megawatt (MW) Cholla coal-fired power plant in Joseph City, Arizona. Conceptual design of the integrated system was undertaken with APS partners Air Liquide (AL) and Parsons. The process engineering was separated into five major areas: flue gas preparation and CO2 delivery, algae farming, water management, hydrogasification, and biofuel production. The process flow diagrams, energy and material balances, and preliminary major equipment needs for each major area were prepared to reflect integrated process considerations and site infrastructure design basis. The total project also included research and development on a bench-scale hydrogasifier, one-dimensional (1-D) kinetic-model simulation, extensive algae stressing, oil extraction, lipid analysis and a half-acre algae farm demonstration at APS?s Redhawk testing facility. During the project, a two-acre algae testing facility with a half-acre algae cultivation area was built at the APS Redhawk 1000 MW natural gas combined cycle power plant located 55 miles west of Phoenix. The test site integrated flue gas delivery, CO2 capture and distribution, algae cultivation, algae nursery, algae harvesting, dewatering and onsite storage as well as water treatment. The site environmental, engineering, and biological parameters for the cultivators were monitored remotely. Direct biodiesel production from biomass through an acid-catalyzed transesterification reaction and a supercritical methanol transesterification reaction were evaluated. The highest oil-to-biodiesel conversion of 79.9% was achieved with a stressed algae sample containing 40% algae oil. The effort concluded that producing biodiesel directly from the algae biomass could be an efficient, cost-effective and readily scalable way to produce biodiesel by eliminating the oil extraction process.

Sun, Xiaolei; Rink, Nancy T

2011-04-29T23:59:59.000Z

451

Analysis of three idealized reactor configurations: plate, pin, and homogeneous. [LMFBR  

SciTech Connect (OSTI)

Detailed Monte Carlo calculations have been performed for three distinct configurations of an idealized fast critical assembly. This idealized assembly was based on the LMFBR benchmark critical assembly ZPR-6/7. In the first configuration, the entire core was loaded with the plate unit cell of ZPR-6/7. In the second configuration, the entire core was loaded with the ZPR sodium-filled pin calandria. The actual ZPR pin calandria are loaded with mixed (U,Pu) oxide pins which closely match the composition of the ZPR-6/7 plate unit cell. For the present study, slight adjustments were made in the atom concentrations and the length of the pin calandria in order to make the core boundaries and average composition for the pin-cell configuration identical to those of the plate-cell configuration. In the third configuration, the core was homogeneous, again with identical core boundaries and average composition as the plate and pin configurations.

McKnight, R.D.

1983-01-01T23:59:59.000Z

452

Apparatus configured for identification of a material and method of identifying a material  

DOE Patents [OSTI]

The present invention relates to an apparatus configured for identification of a material and method of identifying a material. One embodiment of the present invention provides an apparatus configured for identification of a material including a first region configured to receive a first sample and output a first spectrum responsive to exposure of the first sample to radiation; a signal generator configured to provide a reference signal having a reference frequency and a modulation signal having a modulation frequency; a modulator configured to selectively modulate the first spectrum using the modulation signal according to the reference frequency; a second region configured to receive a second sample and output a second spectrum responsive to exposure of the second sample to the first spectrum; and a detector configured to detect the second spectrum.

Slater, John M. (Idaho Falls, ID); Crawford, Thomas M. (Idaho Falls, ID); Frickey, Dean A. (Idaho Falls, ID)

2001-01-01T23:59:59.000Z

453

Diquark condensation effects on hot quark star configurations  

E-Print Network [OSTI]

The equation of state for quark matter is derived for a nonlocal, chiral quark model within the mean field approximation.We investigate the effects of a variation of the formfactors of the interaction on the phase diagram of quark matter. Special emphasis is on the occurrence of a diquark condensate which signals a phase transition to color superconductivity and its effects on the equation of state under the condition of beta- equilibrium and charge neutrality. We calculate the quark star configurations by solving the Tolman- Oppenheimer- Volkoff equations and obtain for the transition from a hot, normal quark matter core of a protoneutron star to a cool diquark condensed one a release of binding energy of the order of Delta M c^2 ~ 10^{53} erg. We find that this energy could not serve as an engine for explosive phenomena since the phase transition is not first order. Contrary to naive expectations the mass defect increases when for a given temperature we neglect the possibility of diquark condensation.

D. Blaschke; S. Fredriksson; H. Grigorian; A. M. "Oztas

2004-02-07T23:59:59.000Z

454

The magnetic configuration of a delta-spot  

E-Print Network [OSTI]

Sunspots, which harbor both magnetic polarities within one penumbra, are called delta-spots. They are often associated with flares. Nevertheless, there are only very few detailed observations of the spatially resolved magnetic field configuration. We present an investigation performed with the Tenerife Infrared Polarimeter at the Vacuum Tower Telescope in Tenerife. We observed a sunspot with a main umbra and several additional umbral cores, one of them with opposite magnetic polarity (the delta-umbra). The delta-spot is divided into two parts by a line along which central emissions of the spectral line Ca II 854.2 nm appear. The Evershed flow comming from the main umbra ends at this line. In deep photospheric layers, we find an almost vertical magnetic field for the delta-umbra, and the magnetic field decreases rapidly with height, faster than in the main umbra. The horizontal magnetic field in the direction connecting main and delta-umbra is rather smooth, but in one location next to a bright penumbral featu...

Balthasar, Horst; Louis, Rohan E; Verma, Meetu; Denker, Carsten

2013-01-01T23:59:59.000Z

455

Configurable Virtualized System Environments for High Performance Computing  

SciTech Connect (OSTI)

Existing challenges for current terascale high performance computing (HPC) systems are increasingly hampering the development and deployment efforts of system software and scientific applications for next-generation petascale systems. The expected rapid system upgrade interval toward petascale scientific computing demands an incremental strategy for the development and deployment of legacy and new large-scale scientific applications that avoids excessive porting. Furthermore, system software developers as well as scientific application developers require access to large-scale testbed environments in order to test individual solutions at scale. This paper proposes to address these issues at the system software level through the development of a virtualized system environment (VSE) for scientific computing. The proposed VSE approach enables ''plug-and-play'' supercomputing through desktop-to-cluster-to-petaflop computer system-level virtualization based on recent advances in hypervisor virtualization technologies. This paper describes the VSE system architecture in detail, discusses needed tools for VSE system management and configuration, and presents respective VSE use case scenarios.

Engelmann, Christian [ORNL; Scott, Stephen L [ORNL; Ong, Hong Hoe [ORNL; Vallee, Geoffroy R [ORNL; Naughton, III, Thomas J [ORNL

2007-01-01T23:59:59.000Z

456

Stationary Nonaxisymmetric Configurations of Magnetized Singular Isothermal Disks  

E-Print Network [OSTI]

Accepted.... Received...; in original form... We construct both aligned and unaligned (logarithmic spiral) stationary configurations of nonaxisymmetric magnetohydrodynamic (MHD) disks from either a full or a partial razor-thin power-law axisymmetric magnetized singular isothermal disk (MSID) that is embedded with a coplanar azimuthal magnetic field B? of a non-force-free radial scaling r?1/2 and that rotates differentially with a flat rotation curve of speed aD, where a is the isothermal sound speed and D is the dimensionless rotation parameter. Analytical solutions and stability criteria for determining D2 are derived. For aligned nonaxisymmetric MSIDs, eccentric m = 1 displacements may occur at arbitrary D2 in a full MSID but are allowed only with a2D2 = C2 A /2 in a partial MSID (CA is the Alfvén speed), while each case of |m | ? 1 gives two possible values of D2 for purely azimuthal propagations of fast and slow MHD density waves (FMDWs and SMDWs) that appear stationary in an inertial frame of reference. For disk galaxies modeled by a partial MSID resulting from a massive dark-matter halo with a flat rotation curve and a2D2 ? C2 A, stationary aligned perturbations of m = 1 are not allowed. For

Yu-qing Lou

2003-01-01T23:59:59.000Z

457

Two-dimensional interpreter for field-reversed configurations  

SciTech Connect (OSTI)

An interpretive method is developed for extracting details of the fully two-dimensional (2D) “internal” structure of field-reversed configurations (FRC) from common diagnostics. The challenge is that only external and “gross” diagnostics are routinely available in FRC experiments. Inferring such critical quantities as the poloidal flux and the particle inventory has commonly relied on a theoretical construct based on a quasi-one-dimensional approximation. Such inferences sometimes differ markedly from the more accurate, fully 2D reconstructions of equilibria. An interpreter based on a fully 2D reconstruction is needed to enable realistic within-the-shot tracking of evolving equilibrium properties. Presented here is a flexible equilibrium reconstruction with which an extensive data base of equilibria was constructed. An automated interpreter then uses this data base as a look-up table to extract evolving properties. This tool is applied to data from the FRC facility at Tri Alpha Energy. It yields surprising results at several points, such as the inferences that the local ? (plasma pressure/external magnetic pressure) of the plasma climbs well above unity and the poloidal flux loss time is somewhat longer than previously thought, both of which arise from full two-dimensionality of FRCs.

Steinhauer, Loren, E-mail: lstein@uw.edu [Tri Alpha Energy, Rancho Santa Margarita, California 92688 (United States)

2014-08-15T23:59:59.000Z

458

Fusion proton diagnostic for the C-2 field reversed configuration  

SciTech Connect (OSTI)

Measurements of the flux of fusion products from high temperature plasmas provide valuable insights into the ion energy distribution, as the fusion reaction rate is a very sensitive function of ion energy. In C-2, where field reversed configuration plasmas are formed by the collision of two compact toroids and partially sustained by high power neutral beam injection [M. Binderbauer et al., Phys. Rev. Lett. 105, 045003 (2010); M. Tuszewski et al., Phys. Rev. Lett. 108, 255008 (2012)], measurements of DD fusion neutron flux are used to diagnose ion temperature and study fast ion confinement and dynamics. In this paper, we will describe the development of a new 3 MeV proton detector that will complement existing neutron detectors. The detector is a large area (50?cm{sup 2}), partially depleted, ion implanted silicon diode operated in a pulse counting regime. While the scintillator-based neutron detectors allow for high time resolution measurements (?100 kHz), they have no spatial or energy resolution. The proton detector will provide 10 cm spatial resolution, allowing us to determine if the axial distribution of fast ions is consistent with classical fast ion theory or whether anomalous scattering mechanisms are active. We will describe in detail the diagnostic design and present initial data from a neutral beam test chamber.

Magee, R. M., E-mail: rmagee@trialphaenergy.com; Clary, R.; Korepanov, S.; Smirnov, A.; Garate, E.; Knapp, K. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States); Tkachev, A. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation)

2014-11-15T23:59:59.000Z

459

Low noise cryogenic electronics: preamplifier configurations with feedback on the bolometer  

E-Print Network [OSTI]

We have developed preamplifier configurations used to readout resistive bolometers such as those based on Neutron Transmuted Doped Germanium thermometers (so called NTD Ge thermometers)[1] or NbSi thin film thermometers [2, 3]. We introduce the impedance regulating preamplifier configuration. This configuration, is compared to previously proposed readout configurations with feedback on the bolometer [4]. It is shown that the impedance regulating preamplifier achieves Extreme Electrothermal Feedback without using transition edge thermometer and SQUID readout. Thus the detector and readout electronics are straightforwardly calibrated and can handle much larger event rates. Looped configurations simplify the design and improve performance of detection such as bandwidth. Finally, we analyse the impedance regulating amplifier noise contributions, with JFETs as front end device, relative to other configurations.

D. Yvon; V. Sushkov

1999-11-19T23:59:59.000Z

460

Dependence of effective internal field of congruent lithium niobate on its domain configuration and stability  

SciTech Connect (OSTI)

Congruent lithium niobate is characterized by its internal field, which arises due to defect clusters within the crystal. Here, it is shown experimentally that this internal field is a function of the molecular configuration in a particular domain and also on the stability of that particular configuration. The measurements of internal field are done using interferometric technique, while the variation of domain configuration is brought about by room temperature high voltage electric field poling.

Das, Ranjit, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com; Ghosh, Souvik, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com; Chakraborty, Rajib, E-mail: ranjitdas.in@gmail.com, E-mail: souvik2cat@gmail.com, E-mail: srirajib@yahoo.com [Department of Applied Optics and Photonics, University of Calcutta, JD-2, Sector III, Salt Lake, Kolkata 700098 (India)

2014-06-28T23:59:59.000Z

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Optical fiber configurations for transmission of laser energy over great distances  

DOE Patents [OSTI]

There are provided optical fiber configurations that provide for the delivery of laser energy, and in particular, the transmission and delivery of high power laser energy over great distances. These configurations further are hardened to protect the optical fibers from the stresses and conditions of an intended application. The configurations provide means for determining the additional fiber length (AFL) need to obtain the benefits of such additional fiber, while avoiding bending losses.

Rinzler, Charles C; Zediker, Mark S

2013-10-29T23:59:59.000Z

462

Optical fiber configurations for transmission of laser energy over great distances  

DOE Patents [OSTI]

There are provided optical fiber configurations that provide for the delivery of laser energy, and in particular, the transmission and delivery of high power laser energy over great distances. These configurations further are hardened to protect the optical fibers from the stresses and conditions of an intended application. The configurations provide means for determining the additional fiber length (AFL) need to obtain the benefits of such additional fiber, while avoiding bending losses.

Rinzler, Charles C; Zediker, Mark S

2014-11-04T23:59:59.000Z

463

Comparative analysis of peat gasification reactor configuration. Final report  

SciTech Connect (OSTI)

This report summarizes the comparative analysis of two generic gasifiers (fluidized bed and entrained bed) and two specific hydrogasifiers (IGT's Peat-gas and Rockwell International's hydrogasifier). The objective is to establish a basis for recommending a peat gasification reactor configuration for testing in a DOE peat gasification pilot plant project. The approach involved the following four steps: data base evaluation, regression analysis, a chemical engineering evaluation of upstream and downstream equipment requirement, and computer simulation. Mathematical models and computer programs were developed to simulate the entrained-bed and fluidized-bed reactors. Parametric analyses were made, using these computer programs, to test the sensitivity and effects of significant operating variables (temperature, pressure and feed gas composition, for instance) on the product gas composition in the IGT gasifier and Rockwell International gasifier. This review and analysis concentrates primarily upon the Peatgas process of the Institute of Gas Technology and the Rockwell International Hydrogasification Process. The two-stage Peatgas process appears to have advantages in higher thermal efficiency, smaller capital investment, and its application of existing commercial operations and proven design practices from other types of fluidized solids processing units. There are two problems concerning operability of the Peatgas process: (1) the design of a fluidized solids unit for quite low standpipe densities (approximately 11 to 15 pounds per cubic foot), which may become even lower upon operating upsets, and (2) the potential problem of ash sintering in the very hot combustion zone of the steam-oxygen gasifier. On a relative time scale of development, the Peatgas would seem to be much closer to possible early commercialization than is the Rockwell system.

Not Available

1981-07-01T23:59:59.000Z

464

E-Print Network 3.0 - achieving optimal configuration Sample...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

search results for: achieving optimal configuration Page: << < 1 2 3 4 5 > >> 1 Trafic engineering optimization methods to provide multiple IP services on a shared...

465

MAP, MAC, and Vortex-rings Configurations in the Weinberg-Salam Model  

E-Print Network [OSTI]

We report on the presence of new axially symmetric monopoles, antimonopoles and vortex-rings solutions of the SU(2)$\\times$U(1) Weinberg-Salam model of electromagnetic and weak interactions. When the $\\phi$-winding number $n=1$, and 2, the configurations are monopole-antimonopole pair (MAP) and monopole-antimonopole chain (MAC) with poles of alternating sign magnetic charge arranged along the $z$-axis. Vortex-rings start to appear from the MAP and MAC configurations when the winding number $n=3$. The MAP configurations possess zero net magnetic charge whereas the MAC configurations possess net magnetic charge of $4\\pi n/e$. In the MAP configurations, the monopole-antimonopole pair is bounded by the ${\\cal Z}^0$ field flux string and there is an electromagnetic current loop encircling it. The monopole and antimonopole possess magnetic charges $\\pm\\frac{2\\pi n}{e}$ respectively. In the MAC configurations there is no string connecting the monopole and the adjacent antimonopole and they possess magnetic charges $\\pm\\frac{4\\pi n}{e}$ respectively. The MAC configurations possess infinite total energy and zero magnetic dipole moment whereas the MAP configurations which are actually sphalerons possess finite total energy and magnetic dipole moment. The configurations were investigated for varying value of Higgs boson mass $0\\leq M_H^2\\leq 80$ at Weinberg angle $\\theta_W=\\frac{\\pi}{4}$.

Rosy Teh; Ban-Loong Ng; Khai-Ming Wong

2014-08-20T23:59:59.000Z

466

System Configuration Management Implementation Procedure for the Canister Storage Building (CSB)  

SciTech Connect (OSTI)

This document provides configuration management for the Distributed Control System (DCS), the Gaseous Effluent Monitoring System (GEMS-100) System, the Heating Ventilation and Air Conditioning (HVAC) Programmable Logic Controller (PLC), the Canister Receiving Crane (CRC) CRN-001 PLC, and both North and South vestibule door interlock system PLCs at the Canister Storage Building (CSB). This procedure identifies and defines software configuration items in the CSB control and monitoring systems, and defines configuration control throughout the system life cycle. Components of this control include: configuration status accounting; physical protection and control; and verification of the completeness and correctness of these items.

GARRISON, R.C.

2000-11-28T23:59:59.000Z

467

Energy and Society (ER100/PP184/ER200/PP284) Fall 2014 Topics: Thermodynamics of energy systems; Power Loss; Peak Oil; Energy economics. Problem Set #3  

E-Print Network [OSTI]

; Power Loss; Peak Oil; Energy economics. Problem Set #3 Due October 9, in class, or before 5pm outside) Fall 2014 Topics: Thermodynamics of energy systems; Power Loss; Peak Oil; Energy economics. Problem Set

Kammen, Daniel M.

468

Analysis and testing of multilayer and aerogel insulation configurations  

SciTech Connect (OSTI)

Multilayer insulation systems that have robust operational characteristics have long been a goal of many research projects. Such thermal insulation systems may need to offer some degree of structural support and/or mechanical integrity during loss of vacuum scenarios while continuing to provide insulative value to the vessel. Aerogel-based composite blankets can be the best insulation materials in ambient pressure environments; in high vacuum, the thermal performance of aerogel improves by about one order of magnitude. Standard multilayer insulation (MLI) is typically 50% worse at ambient pressure and at soft vacuum, but as much as two or three orders of magnitude better at high vacuum. Different combinations of aerogel blanket and multilayer insulation materials have been tested at the Cryogenics Test Laboratory of NASA Kennedy Space Center. Analysis performed at Oak Ridge National Laboratory showed an importance to the relative location of the MLI and aerogel blankets. Apparent thermal conductivity testing under cryogenicvacuum conditions was performed to verify the analytical conclusion. Tests results are shown to be in agreement with the analysis which indicated that the best performance is obtained with aerogel layers located in the middle of the blanket insulation system.

Johnson, W L [NASA Kennedy Space Center, Kennedy Space Center, Florida; Demko, Jonathan A [ORNL; Fesmire, J. E. [NASA Kennedy Space Center, Kennedy Space Center, Florida

2010-01-01T23:59:59.000Z

469

Proc. IEEE PowerTech, Bucharest, June 2009. 1 Abstract-Power flow studies are typically used to determine  

E-Print Network [OSTI]

Proc. IEEE PowerTech, Bucharest, June 2009. 1 Abstract-Power flow studies are typically used, and hence reliable solution algorithms that incorporate the effect of data uncertainty into the power flow to the power flow problem with uncertainties is explained in detail, and several numerical results

Cañizares, Claudio A.

470

General Project Sequence The following are typical steps on many projects. Actual required steps may vary from project to project  

E-Print Network [OSTI]

General Project Sequence The following are typical steps on many projects. Actual required steps may vary from project to project depending upon the scope, complexity, and specific features. Time periods indicated will vary depending on the nature of the project and needs of the user group

Mather, Patrick T.

471

Title: Analytic Evolutions in the Digital Ocean Until recently, the collection of data regarding the activity of learners typically required  

E-Print Network [OSTI]

Title: Analytic Evolutions in the Digital Ocean Abstract: Until recently, the collection of data regarding the activity of learners typically required interruption of the learning process in the form to as the digital desert (DiCerbo & Behrens, 2012, 2014). As the use of digital devices increases during the natural

472

Research: A typical thermal barrier coating consists of two layers over the substrate: 1) a ceramic top coat to  

E-Print Network [OSTI]

Research: A typical thermal barrier coating consists of two layers over the substrate: 1) a ceramic-level understanding of the metal-ceramic and ceramic-ceramic interfaces present in thermal barrier coatings. We have interfaces weaken as the ceramic thickens. This provides atomic-level insight as to why thermal barrier

Carter, Emily A.

473

BS in Environmental Science: Typical Program of Study1 4 year (2011 Catalog) Fall Quarter Winter Quarter Spring Quarter  

E-Print Network [OSTI]

BS in Environmental Science: Typical Program of Study1 ­ 4 year (2011 Catalog) Fall Quarter Sciences (5) Core (5)4 ENSC 100Introduction to Environmental Science (2)5 Core (5) Sophomore BIOL) 1 In order to earn a Bachelor of Science in Environmental Science, a student must complete 180

Carter, John

474

Career Options for MBA Graduates An MBA graduate typically works in upper management positions with small and large corporations or  

E-Print Network [OSTI]

Career Options for MBA Graduates An MBA graduate typically works in upper management positions with small and large corporations or nonprofit organizations. Managers are needed in all businesses. The type of job often depends on prior work experience and elective courses taken in the MBA program. Popular job

Hemmers, Oliver

475

SIMULATION OF A TYPICAL HOUSE IN THE REGION OF ANTANANARIVO, MADAGASCAR DETERMINATION OF PASSIVE SOLUTIONS USING LOCAL MATERIALS  

E-Print Network [OSTI]

SIMULATION OF A TYPICAL HOUSE IN THE REGION OF ANTANANARIVO, MADAGASCAR DETERMINATION OF PASSIVE union ABSTRACT This paper deals with new proposals for the design of passive solutions adapted use raw wood to warm the poorly designed houses. This leads to a large scale deforestation

Boyer, Edmond

476

Final Technical Report: Hawaii Hydrogen Center for Development and Deployment of Distributed Energy Systems  

SciTech Connect (OSTI)

Hydrogen power park experiments in Hawai‘i produced real-world data on the performance of commercialized electrochemical components and power systems integrating renewable and hydrogen technologies. By analyzing the different losses associated with the various equipment items involved, this work identifies the different improvements necessary to increase the viability of these technologies for commercial deployment. The stand-alone power system installed at Kahua Ranch on the Big Island of Hawaii required the development of the necessary tools to connect, manage and monitor such a system. It also helped the electrolyzer supplier to adapt its unit to the stand-alone power system application. Hydrogen fuel purity assessments conducted at the Hawai‘i Natural Energy Institute (HNEI) fuel cell test facility yielded additional knowledge regarding fuel cell performance degradation due to exposure to several different fuel contaminants. In addition, a novel fitting strategy was developed to permit accurate separation of the degradation of fuel cell performance due to fuel impurities from other losses. A specific standard MEA and a standard flow field were selected for use in future small-scale fuel cell experiments. Renewable hydrogen production research was conducted using photoelectrochemical (PEC) devices, hydrogen production from biomass, and biohydrogen analysis. PEC device activities explored novel configurations of ‘traditional’ photovoltaic materials for application in high-efficiency photoelectrolysis for solar hydrogen production. The model systems investigated involved combinations of copper-indium-gallium-diselenide (CIGS) and hydrogenated amorphous silicon (a-Si:H). A key result of this work was the establishment of a robust “three-stage” fabrication process at HNEI for high-efficiency CIGS thin film solar cells. The other key accomplishment was the development of models, designs and prototypes of novel ‘four-terminal’ devices integrating high-efficiency CIGS and a-Si:H with operating features compatible with high-efficiency photoelectrochemical (PEC) water-splitting. The objective of one activity under the hydrogen production from biomass task was to conduct parametric testing of the Pearson gasifier and to determine the effects of gasifier operating conditions on the gas yields and quality. The hydrogen yield from this gasifier was evaluated in a parametric test series over a range of residence times from 0.8 to 2.2 seconds. H2 concentrations as high as 55% (volume) were measured in the product gas at the longer residence times and this corresponds to a hydrogen yield of 90 kg per tonne of bagasse without gas upgrading. The objective of another activity was to develop hot gas clean-up capabilities for the HNEI gasifier test facility to support hydrogen-from-biomass research. The product gas stream at the outlet of the hot gas filter was characterized for concentrations of permanent gas species and contaminants. Biomass feedstock processing activity included a preliminary investigation into methods for processing sugar cane trash at the Puunene Sugar Factory on the island of Maui, Hawaii. The objective of the investigation was to explore treatment methods that would enable the successful use of cane trash as fuel for the production of hydrogen via gasification. Analyses were completed for the technical and economic feasibility of producing biofuel from photosynthetic marine microbes on a commercial scale. Results included estimates for total costs, energy efficiency, and return on investment. The biohydrogen team undertook a comprehensive review of the field and came to what is considered a realistic conclusion. To summarize, continued research is recommended in the fundamentals of the science related to genetic engineering and specific topics to cover knowledge gaps. In the meantime, the team also advocates continued development of related processes which can be linked to pollution control and other real world applications. The extra revenues hydrogen can provide to these multi-product systems can

Rocheleau, Richard E.

2008-09-30T23:59:59.000Z

477

OPTIMAL CONFIGURATION OF A COMMAND AND CONTROL NETWORK: BALANCING PERFORMANCE AND RECONFIGURATION CONSTRAINTS  

SciTech Connect (OSTI)

The optimization of the configuration of communications and control networks is important for assuring the reliability and performance of the networks. This paper presents techniques for determining the optimal configuration for such a network in the presence of communication and connectivity constraints. reconfiguration to restore connectivity to a data-fusion network following the failure of a network component.

L. DOWELL

1999-08-01T23:59:59.000Z

478

Force Free Configurations of Vortices in High Temperature Superconductors near H_{c2}  

E-Print Network [OSTI]

We study force-free configurations of Abrikosov flux lines in the line-liquid and line-crystal limit, near the melting transition at H_m. We show that the condition for zero force configurations can be solved by appealing to the structure of chiral liquid crystalline phases.

Randall D. Kamien

1998-04-27T23:59:59.000Z

479

Spheromak merging and field reversed configuration formation at the Swarthmore Spheromak Experimenta...  

E-Print Network [OSTI]

Spheromak merging and field reversed configuration formation at the Swarthmore Spheromak- and counter-helicity spheromak merging studies at the Swarthmore Spheromak Experiment SSX M. R. Brown, Phys configuration FRC formation and stability by counter-helicity spheromak merging. A pair of midplane coils

Brown, Michael R.

480

Introducing Automated Environment Configuration Testing in an Industrial Setting Caryna Pinheiro  

E-Print Network [OSTI]

Introducing Automated Environment Configuration Testing in an Industrial Setting Caryna Pinheiro environment configuration testing strategy developed as part of an action research project to deal with issues of staging environment instability in a large organization. We demonstrate how a suite of automated

Sillito, Jonathan

Note: This page contains sample records for the topic "typical energy-system configurations" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

A Safety Case Approach to Assuring Configurable Architectures of Safety-Critical Product Lines  

E-Print Network [OSTI]

A Safety Case Approach to Assuring Configurable Architectures of Safety-Critical Product Lines to the development of safety-critical systems. A product line offers large-scale reuse by exploiting common features the safety of architectural configurations and variation when developing product-line safety cases. We

Kelly, Tim

482

Design Optimization of MultiElement Aerodynamic Configurations Using a Viscous  

E-Print Network [OSTI]

Design Optimization of Multi­Element Aerodynamic Configurations Using a Viscous Adjoint Method.S.A An adjoint-based Navier-Stokes design and optimization method for multi-element aerodynamic configurations effects. Using a viscous continuous adjoint formulation, the necessary aerodynamic gradient information

Kim, Sangho

483

Exploiting the Impact of Database System Configuration Parameters: A Design of Experiments Approach  

E-Print Network [OSTI]

in determining DBMS performance. However, the number of configuration parameters in a DBMS is very large may have no or marginal effects on the DBMS performance for the given query workload. Database of input parameters. Second, we exploit the estimated effects to: 1) rank DBMS configuration parameters

Minnesota, University of

484

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432-2000  

E-Print Network [OSTI]

Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432 2011 for Mac HMS Help Desk: (617) 432-2000 2 · Create a new;Configure Microsoft Outlook 2011 for Mac HMS Help Desk: (617) 432-2000 3

Blackwell, Keith

485

OPTIMAL CONFIGURATION OF A COMMAND AND CONTROL NETWORK: BALANCING PERFORMANCE AND RECONFIGURATION CONSTRAINTS  

SciTech Connect (OSTI)

The optimization of the configuration of communications and control networks is important for assuring the reliability and performance of the networks. This paper presents techniques for determining the optimal configuration for such a network in the presence of communication and connectivity constraints.

L. DOWELL

1999-07-01T23:59:59.000Z

486

Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile Agents  

E-Print Network [OSTI]

Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile; Methodologies for PVC Configuration in Heterogeneous ATM Environments Using Intelligent Mobile Agents John Boyer by individual ATM switch vendors has created an environment where there is no uniform method for PVC

White, Tony

487

Optimizing a physical security configuration using a highly detailed simulation model  

E-Print Network [OSTI]

Optimizing a physical security configuration using a highly detailed simulation model Marechal, T. Email: tommarechal@hotmail.com Abstract This chapter focuses on using a highly detailed simulation model. In this chapter describes the use of a highly detailed simulation model to find a superior security configuration

Smith, Alice E.

488

Saltstone Disposal Facility Closure Cap Configuration and Degradation Base Case: Institutional Control to Pine Forest Scenario  

SciTech Connect (OSTI)

The Performance Assessment (PA) for the Saltstone Disposal Facility (SDF) is currently under revision. As part of the PA revision and as documented herein, the closure cap configuration has been reevaluated and closure cap degradation mechanisms and their impact upon infiltration through the closure cap have been evaluated for the institutional control to pine forest, land use scenario. This land use scenario is considered the base case land use scenario. This scenario assumes a 100-year institutional control period following final SDF closure during which the closure cap is maintained. At the end of institutional control, it is assumed that a pine forest succeeds the cap's original bamboo cover. Infiltration through the upper hydraulic barrier layer of the closure cap as determined by this evaluation will be utilized as the infiltration input to subsequent PORFLOW vadose zone contaminant transport modeling, which will also be performed as part of the PA revision. The impacts of pine forest succession, erosion, and colloidal clay migration as degradation mechanisms on the hydraulic properties of the closure cap layers over time have been estimated and the resulting infiltration through the closure cap has been evaluated. The primary changes caused by the degradation mechanisms that result in increased infiltration are the formation of holes in the upper GCL by pine forest succession and the reduction in the saturated hydraulic conductivity of the drainage layers due to colloidal clay migration into the layers. Erosion can also result in significant increases in infiltration if it causes the removal of soil layers, which provide water storage for the promotion of evapotranspiration. For this scenario, infiltration through the upper GCL was estimated at approximately 0.29 inches/year under initial intact conditions, it increased to approximately 11.6 inches/year at year 1000 in nearly a linear fashion, and it approached an asymptote of around 14.1 inches/year at year 1800 and thereafter. At year 1800, it was estimated that holes covered approximately 0.3 percent of the GCL due to root penetration, and that this resulted in an infiltration near that of typical background infiltration (i.e. as though the GCL were not there at all). This demonstrated that a very small area of holes essentially controlled the hydraulic performance of the GCL.

Phifer, M.A.

2004-03-19T23:59:59.000Z

489

Sustainable Energy Solutions Task 1.0: Networked Monitoring and Control of Small Interconnected Wind Energy Systems  

SciTech Connect (OSTI)

EXECUTIVE SUMARRY This report presents accomplishments, results, and future work for one task of five in the Wichita State University Sustainable Energy Solutions Project: To develop a scale model laboratory distribution system for research into questions that arise from networked control and monitoring of low-wind energy systems connected to the AC distribution system. The lab models developed under this task are located in the Electric Power Quality Lab in the Engineering Research Building on the Wichita State University campus. The lab system consists of four parts: 1. A doubly-fed induction generator 2. A wind turbine emulator 3. A solar photovoltaic emulator, with battery energy storage 4. Distribution transformers, lines, and other components, and wireless and wired communications and control These lab elements will be interconnected and will function together to form a complete testbed for distributed resource monitoring and control strategies and smart grid applications testing. Development of the lab system will continue beyond this project.

Janet.twomey@wichita.edu

2010-04-30T23:59:59.000Z

490

Spectroscopy and intruder configurations of $^{33}$Mg and $^{31}$Ne studied with antisymmetrized molecular dynamics  

E-Print Network [OSTI]

Excitation spectra and neutron single particle configurations of $^{33}$Mg and $^{31}$Ne are investigated by using antisymmetrized molecular dynamics combined with generator coordinate method. It is shown that both nuclei have strongly deformed $3/2^-$ ground state with a $3p2h$ configuration. The excitation spectra are qualitatively understood in terms of the Nilsson model and the calculation has shown the coexistence of different intruder configurations within small excitation energy. The calculated one neutron separation energy of $^{31}$Ne is rather small ($S_n=250$ keV) and implies a p-wave one neutron halo with a strongly deformed core.

M. Kimura

2011-05-17T23:59:59.000Z

491

Cold flow scaleup facility experimental results and comparison of performance at different bed configurations, Volume 1: Topical report, January--December 1983  

SciTech Connect (OSTI)

KRW Energy Systems Inc. is engaged in the continuing development of a pressurized, fluidized-bed gasification process at its Waltz Mill Site in Madison, Pennsylvania. The overall objective of the program is to demonstrate the viability of the KRW process for the environmentally acceptable production of low- and medium-BTU fuel gas from a variety of fossilized carbonaceous feedstocks for electric power generation, synthetic natural gas, chemical feedstocks and industrial fuels. This report presents analysis of the Cold Flow Scaleup Facility (CFSF) operations. Included is work performed on the 3-meter CFSF model using four different bed configurations to check correlations and scale-up criteria developed from studies conducted in small-scale cold flow units and those available in open literature. The 3-meter model permits full front-face viewing of the fluidized bed through a transparent plastic window and with its instrumentation allows detailed studies of jet behavior, bubble dynamics, solid circulation, gas mixing, and related phenomena important to the design of a large-scale gasifier. 87 refs., 95 figs., 56 tabs.

Schmidt, D.K.; Yang, W.C.; Ettehadieh, B.; Anestis, T.C.; Haldipur, G.B.; Kettering, E.; O'Rourke, R.E.; Weigle, D.

1988-12-01T23:59:59.000Z

492

Contaminant distributions at typical U.S. uranium milling facilities and their effect on remedial action decisions  

SciTech Connect (OSTI)

Past operations at uranium processing sites throughout the US have resulted in local contamination of soils and ground water by radionuclides, toxic metals, or both. Understanding the origin of contamination and how the constituents are distributed is a basic element for planning remedial action decisions. This report describes the radiological and nonradiological species found in ground water at a typical US uranium milling facility. The report will provide the audience with an understanding of the vast spectrum of contaminants that must be controlled in planning solutions to the long-term management of these waste materials.

Hamp, S. [USDOE Albuquerque Operations Office, NM (United States). Uranium Mill Tailings Remedial Action Project Office; Jackson, T.J. [Geraghty and Miller, Inc., Albuquerque, NM (United States); Dotson, P.W. [Roy F. Weston, Inc., Albuquerque, NM (United States)

1995-03-01T23:59:59.000Z

493

Venture Capitalists' Decision to Withdraw: The Role of Portfolio Configuration From a Real Options Lens  

E-Print Network [OSTI]

When does a venture capital firm withdraw from an investment project prior to its completion? This study offers a real options view on this decision by examining the contingent effects of portfolio configuration. We explore how project withdrawal...

Li, Yong; Chi, Tailan

2012-01-01T23:59:59.000Z

494

p-CdTe/n-CdS photovoltaic cells in the substrate configuration.  

E-Print Network [OSTI]

??In this thesis, p-CdTe/n-CdS solar cells in the substrate configuration have been studied. The focus is on device fabrication, performance optimization, and the development of… (more)

Wu, Hsiang Ning (1984 - )

2014-01-01T23:59:59.000Z

495

Computations of temperature profiles in spheromak configurations with open field lines Carl Sovinec  

E-Print Network [OSTI]

Computations of temperature profiles in spheromak configurations with open field lines Carl Sovinec 10/27/00 The NIMROD zero- spheromak simulation results have mostly open field lines for parameters

Sovinec, Carl

496

CogPiT ---Configuration of Protocols in TIP Burkhard Stiller \\Lambda  

E-Print Network [OSTI]

CogPiT --- Configuration of Protocols in TIP Burkhard Stiller \\Lambda University of Cambridge 334476, FAX: +44 +1223 334678 E­Mail: Burkhard.Stiller@cl.cam.ac.uk Abstract The variety of upcoming

Haddadi, Hamed

497

Highly configurable platforms for embedded computing systems Frank Vahida,*, Roman Lyseckya  

E-Print Network [OSTI]

Highly configurable platforms for embedded computing systems Frank Vahida,*, Roman Lyseckya 92521, USA Abstract Platform chips, which are pre-designed chips possessing numerous processors energy; Cache; Hardware/software partitioning; Architecture tuning 1. Introduction Integrated circuit (IC

Vahid, Frank

498

UNIVERSITY OF CALIFORNIA, SAN DIEGO Configurable Energy-efficient Co-processors to Scale the  

E-Print Network [OSTI]

UNIVERSITY OF CALIFORNIA, SAN DIEGO Configurable Energy-efficient Co-processors to Scale . . . . . . . . . . . . . . . . 18 Chapter 3 Patchable Conservation Cores: Energy-efficient circuits with processor-like lifetimes

499

Order Module--DOE-STD-1073-2003, CONFIGURATION MANAGEMENT | Department...  

Office of Environmental Management (EM)

Order Module--DOE-STD-1073-2003, CONFIGURATION MANAGEMENT "The familiar level of this module is divided into three sections. The first section covers chapters 1 through 3. The...

500

Design of a cluster analysis heuristic for the configuration and capacity management of manufacturing cells  

E-Print Network [OSTI]

This dissertation presents the configuration and capacity management of manufacturing cells using cluster analysis. A heuristic based on cluster analysis is developed to solve cell formation in cellular manufacturing systems (CMS). The clustering...

Shim, Young Hak

2007-09-17T23:59:59.000Z