Sample records for type aliquot part

  1. Device and method for automated separation of a sample of whole blood into aliquots

    DOE Patents [OSTI]

    Burtis, Carl A. (Oak Ridge, TN); Johnson, Wayne F. (Loudon, TN)

    1989-01-01T23:59:59.000Z

    A device and a method for automated processing and separation of an unmeasured sample of whole blood into multiple aliquots of plasma. Capillaries are radially oriented on a rotor, with the rotor defining a sample chamber, transfer channels, overflow chamber, overflow channel, vent channel, cell chambers, and processing chambers. A sample of whole blood is placed in the sample chamber, and when the rotor is rotated, the blood moves outward through the transfer channels to the processing chambers where the blood is centrifugally separated into a solid cellular component and a liquid plasma component. When the rotor speed is decreased, the plasma component backfills the capillaries resulting in uniform aliquots of plasma which may be used for subsequent analytical procedures.

  2. MASS MEASUREMENT UNCERTAINTY FOR PLUTONIUM ALIQUOTS ASSAYED BY CONTROLLED-POTENTIAL COULOMETRY

    SciTech Connect (OSTI)

    Holland, M.; Cordaro, J.

    2009-03-18T23:59:59.000Z

    Minimizing plutonium measurement uncertainty is essential to nuclear material control and international safeguards. In 2005, the International Organization for Standardization (ISO) published ISO 12183 'Controlled-potential coulometric assay of plutonium', 2nd edition. ISO 12183:2005 recommends a target of {+-}0.01% for the mass of original sample in the aliquot because it is a critical assay variable. Mass measurements in radiological containment were evaluated and uncertainties estimated. The uncertainty estimate for the mass measurement also includes uncertainty in correcting for buoyancy effects from air acting as a fluid and from decreased pressure of heated air from the specific heat of the plutonium isotopes.

  3. Types of contracts and agreements guide. Part 1

    SciTech Connect (OSTI)

    Not Available

    1981-05-01T23:59:59.000Z

    The purpose of this volume is to be helpful in providing a comprehensive introduction to a wide variety of contract types and agreements, including a consideration of small purchase procedures and multiyear procurement. In both format and content, it is designed to help those persons who influence the determination of the types of contracts and agreements to be employed in acquiring goods and services for the Department of Energy. Information is presented on selecting and negotiating types of contract compensation arrangements; fixed-price type contract compensation arrangements, including small purchases and multiyear procurement; cost-reimbursement type contract compensation arrangements; other types of contract compensation agreements; and basic agreements and basic ordering agreements. (LCL)

  4. Zero-Inventory Conditions For a Two-Part-Type Make-to-Stock

    E-Print Network [OSTI]

    Veatch, Michael H.

    Zero-Inventory Conditions For a Two-Part-Type Make-to-Stock Production System Michael H. Veatch finished goods inventory; un- met demand is backordered. The control policy determines which part type and sufficient conditions are found for a zero-inventory pol- icy to be optimal. This result indicates

  5. Method and apparatus for automated processing and aliquoting of whole blood samples for analysis in a centrifugal fast analyzer

    DOE Patents [OSTI]

    Burtis, C.A.; Johnson, W.F.; Walker, W.A.

    1985-08-05T23:59:59.000Z

    A rotor and disc assembly for use in a centrifugal fast analyzer. The assembly is designed to process multiple samples of whole blood followed by aliquoting of the resultant serum into precisely measured samples for subsequent chemical analysis. The assembly requires minimal operator involvement with no mechanical pipetting. The system comprises: (1) a whole blood sample disc; (2) a serum sample disc; (3) a sample preparation rotor; and (4) an analytical rotor. The blood sample disc and serum sample disc are designed with a plurality of precision bore capillary tubes arranged in a spoked array. Samples of blood are loaded into the blood sample disc by capillary action and centrifugally discharged into cavities of the sample preparation rotor where separation of serum and solids is accomplished. The serum is loaded into the capillaries of the serum sample disc by capillary action and subsequently centrifugally expelled into cuvettes of the analyticaly rotor for conventional methods. 5 figs.

  6. Method and apparatus for automated processing and aliquoting of whole blood samples for analysis in a centrifugal fast analyzer

    DOE Patents [OSTI]

    Burtis, Carl A. (Oak Ridge, TN); Johnson, Wayne F. (Loudon, TN); Walker, William A. (Knoxville, TN)

    1988-01-01T23:59:59.000Z

    A rotor and disc assembly for use in a centrifugal fast analyzer. The assembly is designed to process multiple samples of whole blood followed by aliquoting of the resultant serum into precisely measured samples for subsequent chemical analysis. The assembly requires minimal operator involvement with no mechanical pipetting. The system comprises (1) a whole blood sample disc, (2) a serum sample disc, (3) a sample preparation rotor, and (4) an analytical rotor. The blood sample disc and serum sample disc are designed with a plurality of precision bore capillary tubes arranged in a spoked array. Samples of blood are loaded into the blood sample disc in capillary tubes filled by capillary action and centrifugally discharged into cavities of the sample preparation rotor where separation of serum and solids is accomplished. The serum is loaded into the capillaries of the serum sample disc by capillary action and subsequently centrifugally expelled into cuvettes of the analytical rotor for analysis by conventional methods.

  7. PART A: TYPE OF COVERAGE HMO Colorado/Anthem Blue Cross and Blue Shield

    E-Print Network [OSTI]

    PART A: TYPE OF COVERAGE HMO Colorado/Anthem Blue Cross and Blue Shield Colorado Higher Education Insurance Benefits Alliance Trust Effective January 1, 2015 Blue Advantage HMO/Point-of-Service(POS) Plan and copayment options reflect the amount the covered person will pay. BlueAdvantage HMO

  8. FSU Health Compliance Record fax to 8506448958 or mail to 960 Learning Way, Tallahassee, FL 323064178 Part A--Print or type. Illegible forms will not be processed.

    E-Print Network [OSTI]

    Weston, Ken

    323064178 Part A--Print or type. Illegible forms will not be processed. STUDENT NAME, Tallahassee, FL 323064178 Part A--Print or type. Illegible forms will not be processed. STUDENT

  9. The determination of PCBs in Rocky Flats Type IV waste sludge by gas chromatography/electron capture detection. Part 2

    SciTech Connect (OSTI)

    Parish, K.J.; Applegate, D.V.; Postlethwait, P.D.; Boparai, A.S.; Reedy, G.T.

    1994-12-01T23:59:59.000Z

    Before disposal, radioactive sludge (Type IV) from Rocky Flats Plant (RFP) must be evaluated for polychlorinated biphenyl (PCB) content. The Type IV sludge consists of organic solvents, degreasers, cutting oils, and transuranic (TRU) waste mixed with calcium silicate (MicroCel E{reg_sign} and Oil Dri{reg_sign} to form a grease or paste-like material. For laboratory testing, a nonradioactive simulated Type 17V RFP sludge was prepared at Argonne National Laboratory-East (ANL-E). This sludge has a composition similar to that expected from field samples. In an earlier effort, a simplified method was developed for extraction, cleanup of extract, and determination of PCBs in samples of simulated sludge spiked with Aroclors 1254 and 1260. The simplified method has now been used to determine the presence and quantities of other Aroclors in the simulated sludge, namely, Aroclors 10 1 6, 1221, 1232, 1242, and 1248. The accuracy and precision of the data for these Aroclors were found to be similar to the data for sludges spiked with Aroclors 1254 and 1260. Since actual sludges may vary in composition, the method was also verified by analyzing another source of Type IV simulated sludge, prepared by Argonne National Laboratory-West (ANL-W).

  10. Assignment Types UTS LIBRARY

    E-Print Network [OSTI]

    University of Technology, Sydney

    Assignment Types UTS LIBRARY February 2013 Academic Writing Guide Part 2 ­ Assignment Types: This section outlines the basic types of written assignments, providing structural elements and examples. #12;2 II. Assignment Types 1. Essay Writing

  11. Part 5

    Office of Environmental Management (EM)

    May 8, 2012 PERMIT PART 5 Page 5-1 of 11 PART 5 - GROUNDWATER DETECTION MONITORING 5.1. DETECTION MONITORING PROGRAM This Part specifies the requirements of the Detection...

  12. PART III

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012)I, TheJ TOC PART

  13. Orienting Deformable Polygonal Parts without Sensors

    E-Print Network [OSTI]

    Kristek, Shawn

    2012-02-14T23:59:59.000Z

    with low-precision robot manipulators and six parts made of four types of materials. The experimental trials resulted in 154 successes, which show the feasibility of deformable parts orienting. The analysis of the failures showed that for success...

  14. Oak Ridge Centers for Manufacturing Technology, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    more than 1,600 businesses nationwide. These industries ran the gamut of all types of industry in the nation. Automotive part production, food product manufacturing, ceramic...

  15. Part removal of 3D printed parts

    E-Print Network [OSTI]

    Peña Doll, Mateo

    2014-01-01T23:59:59.000Z

    An experimental study was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D printing using a patent ...

  16. A Pivoting Gripper for Feeding Industrial Parts Brian Carlisle

    E-Print Network [OSTI]

    Goldberg, Ken

    robot arm. The system is programmed based on the type of part to be fed. During operation, a collection feeder using a commercially-available system that integrates machine vision,high-speed robot arm part. The robot arm then picks up each part and moves it into a desired final pose as illustrated

  17. Award Types

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office511041cloth DocumentationProductsAlternativeOperationalAugust AugustInstruments on theAward Types Types of

  18. Part I, DAA Overview

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHA Administrative Judgea. Part B 1 Part B - Requirements &b.

  19. Final Report -Public Part -

    E-Print Network [OSTI]

    objective of the PSO 6385 project was to develop stack materials, components and stack technology including and Demonstration of SOFC Stacks PSO Project No. 2006-1-6385 (part 3) 01.03.2006-29.02.2008 Topsoe Fuel Cell A.....................................................................................................................4 3. PROJECT RESULTS

  20. Ex Parte Memorandum

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010Salt | Department ofEvaluationofin11, 2012ParteWednesday,

  1. _PART I - THE SCHEDULE

    National Nuclear Security Administration (NNSA)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn AprilA Approved:AdministrationAnalysisDarby Dietrich5 | NUMBER643|About UsVolumePart

  2. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PART I -

  3. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PART I

  4. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PART IE

  5. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PART IEG

  6. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PART

  7. PART I - THE SCHEDULE

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible for RenewableSpeedingBiomass and BiofuelsOversightandCenter PARC2012) |124 i PARTE

  8. Part B - Requirements & Funding Information PART B - Requirements...

    Office of Environmental Management (EM)

    of Part A. For example, Part A could be located in the master file for IA number xxx at contracting office xxx. Activities undertaken pursuant to this document are subject...

  9. DOL: Role in EEOICPA – Part B and Part E

    Broader source: Energy.gov [DOE]

    DOL is tasked with administering the EEOICPA, both Parts B and E. Part B covers current and former workers who have been diagnosed with cancer, chronic beryllium disease, beryllium sensitivity, or...

  10. Types of Costs Types of Cost Estimates

    E-Print Network [OSTI]

    Boisvert, Jeff

    · Types of Costs · Types of Cost Estimates · Methods to estimate capital costs MIN E 408: Mining% accuracy. ­ 2-5% of pre-production capital Types of Cost Estimates #12;3. Definitive ­ Based on definitive-even $ Production Level Fixed Cost Break-even $ Production Level Cost-Revenue Relationships · Capital Costs (or

  11. ; r : : ~ I f ~ ACCEPTABLE PARTS LIST

    E-Print Network [OSTI]

    Rathbun, Julie A.

    Specifications H. Subcontractor's Non-Standard Part Approval Request I. Limited Usage Parts ATTACHMENTS: (I

  12. Types of Commissioning

    Broader source: Energy.gov [DOE]

    Several commissioning types exist to address the specific needs of equipment and systems across both new and existing buildings. The following commissioning types provide a good overview.

  13. An Automated System for the Creation of Articulated Mechanical Parts

    E-Print Network [OSTI]

    Wheeler, Christopher R.

    2010-07-14T23:59:59.000Z

    has alleviated these problems through the following techniques: 1. A database of parts is imported into the scene using file naming conventions to classify each part by identifier, type, and function. 2. A system of standardization governs... is wrapped in a parent group to maintain its local coordinate system to facilitate quick and accurate vertex modifications. b. Modeling can also be carried out in separate files by any number of modelers. A swap function allows primitive building blocks...

  14. Supernovae. Part II: The aftermath

    E-Print Network [OSTI]

    Trimble, V

    1983-01-01T23:59:59.000Z

    R. Viswanathan, 1980, As- Supernovae. Part II ExperimentalSmith, 1982, Astrophys. Supernovae. Chevalier, R. A. , andC. B. , 1974, Ed. , Supernovae and Supernova Rem- nants,

  15. Types of Costs Types of Cost Estimates

    E-Print Network [OSTI]

    Boisvert, Jeff

    05-1 · Types of Costs · Types of Cost Estimates · Methods to estimate capital costs MIN E 408-Revenue Relationships · Capital Costs (or first cost or capital investment): ­ Expenditures made to acquire or develop capital assets ­ Three main classes of capital costs: 1. Depreciable Investment: · Investment allocated

  16. The Majorana Parts Tracking Database

    E-Print Network [OSTI]

    Abgrall, N; Avignone, F T; Bertrand, F E; Brudanin, V; Busch, M; Byram, D; Caldwell, A S; Chan, Y-D; Christofferson, C D; Combs, D C; Cuesta, C; Detwiler, J A; Doe, P J; Efremenko, Yu; Egorov, V; Ejiri, H; Elliott, S R; Esterline, J; Fast, J E; Finnerty, P; Fraenkle, F M; Galindo-Uribarri, A; Giovanetti, G K; Goett, J; Green, M P; Gruszko, J; Guiseppe, V E; Gusev, K; Hallin, A L; Hazama, R; Hegai, A; Henning, R; Hoppe, E W; Howard, S; Howe, M A; Keeter, K J; Kidd, M F; Kochetov, O; Kouzes, R T; LaFerriere, B D; Leon, J Diaz; Leviner, L E; Loach, J C; MacMullin, J; Martin, R D; Meijer, S J; Mertens, S; Miller, M L; Mizouni, L; Nomachi, M; Orrell, J L; O'Shaughnessy, C; Overman, N R; Petersburg, R; Phillips, D G; Poon, A W P; Pushkin, K; Radford, D C; Rager, J; Rielage, K; Robertson, R G H; Romero-Romero, E; Ronquest, M C; Shanks, B; Shima, T; Shirchenko, M; Snavely, K J; Snyder, N; Soin, A; Suriano, A M; Tedeschi, D; Thompson, J; Timkin, V; Tornow, W; Trimble, J E; Varner, R L; Vasilyev, S; Vetter, K; Vorren, K; White, B R; Wilkerson, J F; Wiseman, C; Xu, W; Yakushev, E; Young, A R; Yu, C -H; Zhitnikov, I

    2015-01-01T23:59:59.000Z

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  17. The Majorana Parts Tracking Database

    E-Print Network [OSTI]

    The Majorana Collaboration; N. Abgrall; E. Aguayo; F. T. Avignone III; A. S. Barabash; F. E. Bertrand; V. Brudanin; M. Busch; D. Byram; A. S. Caldwell; Y-D. Chan; C. D. Christofferson; D. C. Combs; C. Cuesta; J. A. Detwiler; P. J. Doe; Yu. Efremenko; V. Egorov; H. Ejiri; S. R. Elliott; J. Esterline; J. E. Fast; P. Finnerty; F. M. Fraenkle; A. Galindo-Uribarri; G. K. Giovanetti; J. Goett; M. P. Green; J. Gruszko; V. E. Guiseppe; K. Gusev; A. L. Hallin; R. Hazama; A. Hegai; R. Henning; E. W. Hoppe; S. Howard; M. A. Howe; K. J. Keeter; M. F. Kidd; O. Kochetov; S. I. Konovalov; R. T. Kouzes; B. D. LaFerriere; J. Diaz Leon; L. E. Leviner; J. C. Loach; J. MacMullin; R. D. Martin; S. J. Meijer; S. Mertens; M. L. Miller; L. Mizouni; M. Nomachi; J. L. Orrell; C. O'Shaughnessy; N. R. Overman; R. Petersburg; D. G. Phillips II; A. W. P. Poon; K. Pushkin; D. C. Radford; J. Rager; K. Rielage; R. G. H. Robertson; E. Romero-Romero; M. C. Ronquest; B. Shanks; T. Shima; M. Shirchenko; K. J. Snavely; N. Snyder; A. Soin; A. M. Suriano; D. Tedeschi; J. Thompson; V. Timkin; W. Tornow; J. E. Trimble; R. L. Varner; S. Vasilyev; K. Vetter; K. Vorren; B. R. White; J. F. Wilkerson; C. Wiseman; W. Xu; E. Yakushev; A. R. Young; C. -H. Yu; V. Yumatov; I. Zhitnikov

    2015-02-05T23:59:59.000Z

    The Majorana Demonstrator is an ultra-low background physics experiment searching for the neutrinoless double beta decay of $^{76}$Ge. The Majorana Parts Tracking Database is used to record the history of components used in the construction of the Demonstrator. The tracking implementation takes a novel approach based on the schema-free database technology CouchDB. Transportation, storage, and processes undergone by parts such as machining or cleaning are linked to part records. Tracking parts provides a great logistics benefit and an important quality assurance reference during construction. In addition, the location history of parts provides an estimate of their exposure to cosmic radiation. A web application for data entry and a radiation exposure calculator have been developed as tools for achieving the extreme radio-purity required for this rare decay search.

  18. Control of parts : parts making in the building industry

    E-Print Network [OSTI]

    Kendall, Stephen Holmes

    1990-01-01T23:59:59.000Z

    The thesis advances a diagramming tool called PAct. Each diagram is a model of a "value adding" enterprise, representing materials processing, parts manipulation and assembly, and the agents involved. Its purpose is to ...

  19. RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED

    E-Print Network [OSTI]

    Miami, University of

    RECYCLING PROGRAM TYPE LOCATION ALLOWED NOT ALLOWED Batteries, toner, ink cartridges & cell phones and recycling is an important part of that effort. Below is a guide to on-campus recycling at RSMAS: Visit http://www.rsmas.miami.edu/msgso/ for map of recycling bin locations. NOTE: This is not an exhaustive list. If unauthorized items are found

  20. Division of Water, Parts 700-750 and Parts 800-941: Classes and Standards of Quality and Purity (New York)

    Broader source: Energy.gov [DOE]

    These sections describe general standards of water quality and purity as well as standards for specific water bodies (Parts 800-941). The regulations provide classifications for different types of...

  1. BBF RFC 106: A Standard Type IIS Syntax for Plants

    E-Print Network [OSTI]

    Rutten, Virginia

    2015-03-17T23:59:59.000Z

    Here we define a standard syntax for assembling standard parts for expression in plant cells, extensible to all other eukaryotes. Variations of the Type IIS mediated cloning method known as Golden Gate Cloning, most notably ...

  2. Types of Reuse

    Broader source: Energy.gov [DOE]

    The following provides greater detail regarding the types of reuse pursued for LM sites. It should be noted that many actual reuses combine several types of the uses listed below.

  3. Notice Type: Presolicitation

    E-Print Network [OSTI]

    /N: SW-2-CIFS-C, 2 each SW-2, FCP, -C, 2 each SW-2, ISCSI C, 1 each 0E Standard Part Replace 4hr, Install

  4. Niger Delta play types, Nigeria

    SciTech Connect (OSTI)

    Akinpelu, A.O. [Chevron Nigeria Limited, Lagos (Nigeria)

    1995-08-01T23:59:59.000Z

    Exploration databases can be more valuable when sorted by play type. Play specific databases provide a system to organize E & P data used in evaluating the range of values of parameters for reserve estimation and risk assessment. It is important both in focusing the knowledge base and in orienting research effort. A play in this context is any unique combination of trap, reservoir and source properties with the right dynamics of migration and preservation that results in hydrocarbon accumulation. This definitions helps us to discriminate the subtle differences found with these accumulation settings. About 20 play types were identified around the Niger Delta oil province in Nigeria. These are grouped into three parts: (1) The proven plays-constituting the bulk of exploration prospects in Nigeria today. (2) The unproven or semi-proven plays usually with some successes recorded in a few tries but where knowledge is still inadequate. (3) The unproven or analogous play concept. These are untested but geologically sound ideas which may or may not have been tried elsewhere. With classification and sub grouping of these play types into specific databases, intrinsic attributes and uniqueness of each of them with respect to the four major risk elements and the eight parameters for reserve estimation can be better understood.

  5. Inaccessibility and Subinaccessibility. Part I

    E-Print Network [OSTI]

    Kiselev, A

    2010-01-01T23:59:59.000Z

    The work presents the first part of second edition of the previous edition of 2000 under the same title containing the proof (in $ZF$) of the nonexistence of inaccessible cardinals, now enriched and improved. This part contains the apparatus of subinaccessible cardinals and its basic tools -- theories of reduced formula spectra and matrices, disseminators and others -- which are used in this proof and is set forth now in their more transparent and simplified form. Much attention is devoted to the explicit and substantial development and cultivation of basic ideas, serving as grounds for all main constructions and reasonings.

  6. Investigation of the Structure and Function of Type III Secretion Needle and Tip Proteins

    E-Print Network [OSTI]

    Zhang, Lingling

    2009-04-22T23:59:59.000Z

    Many Gram-negative pathogens possess type III secretion systems as part of their required virulence factor repertoire. The type III secretion apparatus (TTSA) spans the bacterial inner and outer membranes and resembles a ...

  7. Simultaneous acquisition of differing image types

    DOE Patents [OSTI]

    Demos, Stavros G

    2012-10-09T23:59:59.000Z

    A system in one embodiment includes an image forming device for forming an image from an area of interest containing different image components; an illumination device for illuminating the area of interest with light containing multiple components; at least one light source coupled to the illumination device, the at least one light source providing light to the illumination device containing different components, each component having distinct spectral characteristics and relative intensity; an image analyzer coupled to the image forming device, the image analyzer decomposing the image formed by the image forming device into multiple component parts based on type of imaging; and multiple image capture devices, each image capture device receiving one of the component parts of the image. A method in one embodiment includes receiving an image from an image forming device; decomposing the image formed by the image forming device into multiple component parts based on type of imaging; receiving the component parts of the image; and outputting image information based on the component parts of the image. Additional systems and methods are presented.

  8. TEELINDUSTRIAL OPERATING INSTRUCTIONS & PARTS MANUAL

    E-Print Network [OSTI]

    Kleinfeld, David

    -stage zoning applications in hydronic heating and cooling systems for residential, commercial and/or inTEELINDUSTRIAL SERIES OPERATING INSTRUCTIONS & PARTS MANUAL WATER CIRCULATING PUMPS MODELS 1P899A INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE, OR SERVICE TEEL PUMPS. PROTECT YOURSELF

  9. Inaccessibility and Subinaccessibility. In two parts. Part II

    E-Print Network [OSTI]

    Kiselev, A

    2010-01-01T23:59:59.000Z

    The work presents the second part of the second edition of its previous one published in 2000 under the same title, containing the proof (in $ZF$) of the inaccessible cardinals nonexistence, which is enriched and improved now. This part contains applications of the subinaccessible cardinals apparatus and its basic tools -- theories of reduced formula spectra and matrices, disseminators and others, which are used here in this proof and are set forth now in their more transparent and simplified form. Much attention is devoted to the explicit and substantial development and cultivation of basic ideas, serving as grounds for all main constructions and reasonings. The proof of the theorem about inaccessible cardinals nonexistence is presented in its detailed exposition. Several easy consequences of this theorem and some well-known results are presented.

  10. Inaccessibility and subinaccessibility. In two parts. Part I (in Russian)

    E-Print Network [OSTI]

    Kiselev, Alexander

    2011-01-01T23:59:59.000Z

    This work represents a translation from English into Russian of the first part of the monograph by Alexander Kiselev under the same title, containing the proof (in ZF) of inaccessible cardinals nonexistence. The first edition of this work was published in 2000. This part contains the apparatus of subinaccessible cardinals and its basic tools - theories of reduced formula spectra and matrices, disseminators and others - which are used in this proof and are set forth now in their more transparent and detailed form. Much attention is devoted to the explicit and substantial development and cultivation of basic ideas, serving as grounds for all main constructions and reasonings. Appropriated for specialists in Set Theory and Mathematical Logic, and also for teachers and students of faculties of the mathematical profile.

  11. Inaccessibility and subinaccessibility. In two parts. Part II (in Russian)

    E-Print Network [OSTI]

    Kiselev, Alexander

    2011-01-01T23:59:59.000Z

    This work represents a translation from English into Russian of the second part of the monograph by Alexander Kiselev under the same title. It contains the proof (in ZF) of inaccessible cardinals nonexistence. The first edition of this work was published in 2000. This part II contains applications of the subinaccessible cardinals apparatus and its basic tools - theories of reduced formula spectra and matrices, disseminators and others, which are used here in this proof and are set forth now in their more transparent and refined form. Much attention is devoted to the more explicit and substantial development and cultivation of basic ideas, serving as grounds for all main constructions and reasonings. The proof of the theorem about inaccessible cardinals nonexistence is presented in its detailed exposition. Several easy consequences of this theorem and some well-known results are presented. Appropriated for specialists in Set Theory and Mathematical Logic, and also for teachers and students of faculties of the ...

  12. Typed Self-Optimization

    E-Print Network [OSTI]

    Brown, Matt

    2013-01-01T23:59:59.000Z

    type T y[O]. The operator IsIs is self-applicative, in thatargument t is any of Is[O] or IsIs, and otherwise behavesproof constant introduced by IsIs proves that the type of t

  13. Geometric Qualification of Production Parts

    SciTech Connect (OSTI)

    J. A. Bradley

    2005-09-30T23:59:59.000Z

    Computer Aided Design (CAD) is a commonly utilized software tool to conceptualize and create the part designs that are then used as input for product definition, or for the manufacture of production parts within commercial industry and, more specifically, at the Kansas City Plant (KCP). However, data created on CAD systems is, at times, unable to regenerate within the originating CAD system or be shared or translated for use by a dissimilar CAD system. Commercial software has been developed to help identify or qualify these difficulties that occur in the usage of this data. This project reviewed the different commercial software packages available for the activity of qualification and made recommendations for availability and use in the design processes at the KCP prior to the release of the product definition.

  14. Your Guide to Diabetes: Type 1 and Type 2

    E-Print Network [OSTI]

    Rau, Don C.

    Your Guide to Diabetes: Type 1 and Type 2 National Diabetes Information Clearinghouse #12;#12;Your Guide to Diabetes: Type 1 and Type 2 #12;#12;Contents Learn about Diabetes ............................................................ 1 What is diabetes? .............................................................. 2 What

  15. NRC Transportation Security (Part 73 SNF Update and Part 37 Category...

    Office of Environmental Management (EM)

    NRC Transportation Security (Part 73 SNF Update and Part 37 Category 1 and 2 Materials) NRC Transportation Security (Part 73 SNF Update and Part 37 Category 1 and 2 Materials) NRC...

  16. Fejer-type inequalities

    E-Print Network [OSTI]

    Mitroi, F C

    2011-01-01T23:59:59.000Z

    The aim of this paper is to present some new Fejer-type results for convex functions. Improvements of Young's inequality (the arithmetic-geometric mean inequality) and other applications to special means are pointed as well.

  17. Document Type: Subject Terms

    E-Print Network [OSTI]

    Major, Arkady

    Title: Authors: Source: Document Type: Subject Terms: Abstract: Full Text Word Count: ISSN at creating team results. In fact, it's priceless. Managers in Western corporations have received a lifetime

  18. Etherify field butanes: Part 2

    SciTech Connect (OSTI)

    Sarathy, P.R. (John Brown, Houston, TX (United States)); Suffridge, G.S. (John Brown, Tulsa, OK (United States))

    1993-02-01T23:59:59.000Z

    Worldwide interest in technical details concerning major components of world-scale MTBE complexes continues. Part 1 reviewed alternate scenarios for MTBE production and basic technological considerations to assess component processes for producing MTBE. Commercial technologies and cost considerations for world-scale MTBE complexes call for a focus on butane isomerization, isobutane dehydrogenation and isobutylene etherification. The paper describes isomerization; four commercial processes for dehydrogenation (Oleflex, Catofin, STAR, and FBD-4 processes); three methods for etherification (fixed bed with recycle, fixed bed tubular reactor, and catalytic distillation); and capital and production costs for the MTBE complex.

  19. Ex Parte Memo 07312012.pdf

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010Salt | Department ofEvaluationofin11, 2012Parte Memo - 09

  20. PART III - LIST OF DOCUMENTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize832 2.860 2.864 2.867039 J - 1 PART III -

  1. Microsoft Word - PART 970.doc

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33Frequently Asked Questions forCheneyNovember S.Fluor-B&WOPOWER submits these commentsPART 970

  2. RCRA, superfund and EPCRA hotline training module. Introduction to: Miscellaneous and other units (40 cfr part 264, subpart x and 40 cfr part 265, subparts p, q, and r) updated July 1996

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The module describes the basic requirements and types of units of 40 CFR Part 264, Subpart X and standards for broadly defined treatment processes - Thermal treatment (Part 265, Subpart P); chemical, physical, and biological treatment (Subpart Q); and underground injection (Subpart R). Explains when corrective action applies to these subparts. It presents the relationship between Part 264, Subpart X, and Part 265, Subparts P, Q, and R.

  3. Notice Type: Presolicitation

    E-Print Network [OSTI]

    : 333 -- Machinery Manufacturing/333912 -- Air and Gas Compressor Manufacturing Synopsis: Added: Jul 25 Gas Compressor System, 3 each Pre-cooler,1 each Tie rod measuring tool, 1 each Explosion-proof hydrogen detector, 1 each Spare parts kits for C15-40FX/SSEXT-H2. (Microsoft IE required). Additional

  4. Hygrothermal Simulation of Foundations: Part 1 - Soil Material Properties

    SciTech Connect (OSTI)

    Kehrer, Manfred [ORNL; Pallin, Simon B [ORNL

    2012-10-01T23:59:59.000Z

    The hygrothermal performance of soils coupled to buildings is a complicated process. A computational approach for heat transfer through the ground has been well defined (EN ISO 13370:2007, 2007), and simplified methods have been developed (Staszczuk, Radon, and Holm 2010). However, these approaches generally ignore the transfer of soil moisture, which is not negligible (Janssen, Carmeliet, and Hens 2004). This study is divided into several parts. The intention of the first part is to gather, comprehend and adapt soil properties from Soil Science. The obtained information must be applicable to related tasks in Building Science and validated with hygrothermal calculation tools. Future parts of this study will focus on the validation aspect of the soil properties to be implemented. Basic changes in the software code may be requested at this time. Different types of basement construction will be created with a hygrothermal calculation tool, WUFI. Simulations from WUFI will be compared with existing or ongoing measurements. The intentions of the first part of this study have been fulfilled. The soil properties of interest in Building Science have been defined for 12 different soil textures. These properties will serve as input parameters when performing hygrothermal calculations of building constructions coupled to soil materials. The reliability of the soil parameters will be further evaluated with measurements in Part 2.

  5. Part II - Managerial Competencies: Organizational Representation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    II - Managerial Competencies: Organizational Representation and Liaison Part II - Managerial Competencies: Organizational Representation and Liaison Form for the SES program...

  6. Dust around Type Ia supernovae

    E-Print Network [OSTI]

    Wang, Lifan

    2005-01-01T23:59:59.000Z

    Dust around Type Ia supernovae Lifan Wang 1,2 LawrenceIa. Subject headings: Supernovae: General, Dust, Extinctionline) bands for Type Ia supernovae. (a), upper panel, shows

  7. A Novel Multi-Coaxial Hollow Fiber Bioreactor for Adherent Cell Types. Part 1

    E-Print Network [OSTI]

    , more than 27,000 deaths in the United States were caused by liver failure (Nyberg et al., 1992). Even distilled water to correlate the radial ¯ow rate (Qr) with (1) the pressure drop (DP) between the media com and zero axial velocity at the boundaries of each compartment in the bioreactor. Axial ¯ow rates were

  8. nature of the system itself, and by the type of behavior it motivates on the part

    E-Print Network [OSTI]

    . Literature Cited Anderson, L. G. 1982a. Living marine re sources: Discussion. In G. M. Brown, Jr., and J. A the discussion is restricted to practical as pects. Given the complexity of such a discussion, Lee G. Anderson and Mary, Virginia Institute of Marine Science, School of Marine Science, Gloucester Point, VA 23062. 49

  9. Wolter type i LAMAR

    SciTech Connect (OSTI)

    Catura, R.C.; Joki, E.G.

    1981-11-01T23:59:59.000Z

    Observational objectives for the LAMAR and their influence on the instrument design are discussed. It is concluded that the most important design parameter is the angular resolution of the LAMAR modules since it so strongly influences sensitivity, optical identifications, source confusion, spectral resolution for objective gratings and the ability to resolve small extended sources. A high resolution Wolter Type I LAMAR module is described, its hardware status discussed, and the performance of a LAMAR observatory presented. A promising technique for enhancing the reflectivity of Wolter Type I X-ray optics in a selected bandpass at high energy has been investigated and the performance of the LAMAR module, utilizing this method, has been calculated.

  10. Rappels: 4) Piles Types abstraits de donnes (Abstract Data Type)

    E-Print Network [OSTI]

    Hamel, Sylvie

    Rappels: 4) Piles #12;Types abstraits de données (Abstract Data Type) IFT2015, A2009, Sylvie Hamel Université de Montréal 1Piles Type de données Un ensemble de valeurs Un ensemble d'opérations Structure de Université de Montréal 2Piles #12;Type abstrait de données PILE (§4.2) Garde en mémoire des objets

  11. Route Type Determination Analysis

    SciTech Connect (OSTI)

    Brett Stone

    2011-09-01T23:59:59.000Z

    According to the 2009 National Household Travel Survey 44.4 percent of all miles travelled by Americans in 2009 (including airplanes, trains, boats, golf carts, subways, bikes, etc.) were travelled in cars. If vans, SUV's and pickup trucks are included, that level increases to 86 percent. We do a lot of travelling on the road in personal vehicles - it's important to be able to understand how we get there and how to rate the fuel economy of our trips. An essential part of this is knowing how to decide if a trip is a city or highway trip.

  12. Changing nature of equipment and parts qualification

    SciTech Connect (OSTI)

    Bucci, R.M.

    1988-01-01T23:59:59.000Z

    Ideally, the original supplier of a piece of nuclear safety-related equipment has performed a qualification program and will continue to support that equipment throughout the lifetime of the nuclear power plants in which in equipment is installed. The supplier's nuclear quality assurance program will be maintained and he will continue to offer all necessary replacement parts. These parts will be identical to the original parts, certified to the original purchase order requirements, and the parts will be offered at competitive prices. Due to the changing nature of the nuclear plant equipment market, however, one or more of those ideal features are frequently unavailable when safety-related replacement equipment or parts are required. Thus, the process of equipment and parts qualification has had to adjust in order to ensure obtaining qualified replacements when needed. This paper presents some new directions taken in the qualification of replacement equipment and parts to meet changes in the marketplace.

  13. Postdoc Appointment Types

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What's Possible forPortsmouth/Paducah Project Office Press ReleasesPost-Closure BenefitsAppointment Types

  14. Part-Time Farming in Northeast Texas.

    E-Print Network [OSTI]

    Martin, James R.; Southern, John H.

    1961-01-01T23:59:59.000Z

    JANUARY THE AGRICULTURAL AND MECHANICAL COLLEGE OF TEXAS TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS, DIRECTOR, COLLEGE STATION. TEXAS IN COOPERATION WITH THE U. S. DEPARTMENT OF AGRICULTURE 632320 - This analysis of part-the farming... is part of a broad the income levels, income sources and farm and human patterns of the.88,W rural o area of Northeast Texas (Tearas Agricultural Bulletin 940, Incomes of Rural Families in No A major farm adjustmen part-time farming, or a greater...

  15. Service Contract Addition Please type or print information clearly

    E-Print Network [OSTI]

    Wlodawer, Alexander

    Service Contract Addition Please type or print information clearly Purchasing Department, Building for the service contract. If the item is part of an equipment system, all accessories must be listed. When adding 18. Serial Number 19. Location (Bldg./Rm.) 20. Requested Start Date 21. Service Contract Vendor 22

  16. Modular Information Hiding and Type-Safe Linking for C

    E-Print Network [OSTI]

    Hicks, Michael

    , CMOD, software reliability. Ç 1 INTRODUCTION MODULE systems allow large programs to be constructed from the reliability of software [32]. While full-featured module systems are part of many modern languages (such as MLModular Information Hiding and Type-Safe Linking for C Saurabh Srivastava, Student Member, IEEE

  17. Type-Inference Based Deforestation of Functional Programs

    E-Print Network [OSTI]

    Kent, University of

    Type-Inference Based Deforestation of Functional Programs Von der Fakult¨at f¨ur Mathematik structure is produced by one part and consumed by another one. Deforestation optimises a functional program a new method for deforestation, which combines a known method, short cut deforestation, with a new

  18. Re: Corrected Memorandum Summarizing Ex Parte Communication

    Broader source: Energy.gov (indexed) [DOE]

    (sent via email) Re: Corrected Memorandum Summarizing Ex Parte Communication This memorandum is submitted to revise and correct our earlier memorandum...

  19. Re: Memorandum Summarizing Ex Parte Communication

    Broader source: Energy.gov (indexed) [DOE]

    xpartecommunication@hq.doe.gov (sent via email) Re: Memorandum Summarizing Ex Parte Communication On October 9, 2014, a workshop was hosted by the American Gas Association and...

  20. Rappels: 4) Piles Types abstraits de donnes (Abstract Data Type)

    E-Print Network [OSTI]

    Hamel, Sylvie

    Rappels: 4) Piles Types abstraits de données (Abstract Data Type) IFT2015, A2009, Sylvie Hamel Université de Montréal 1Piles Type de données Un ensemble de valeurs Un ensemble d'opérations Structure de Université de Montréal 2Piles Type abstrait de données PILE (§4.2) Garde en mémoire des objets arbitraires

  1. IY5512: Part 2 Information Security Group

    E-Print Network [OSTI]

    Mitchell, Chris

    Information Security Group The principles · The eight principles are: 1. Economy of mechanism 2. FailIY5512: Part 2 1 Information Security Group IY5512 Computer Security Part 2: Design & evaluation Chris Mitchell me@chrismitchell.net http://www.chrismitchell.net 1 Information Security Group Objectives

  2. IY5512: Part 1 Information Security Group

    E-Print Network [OSTI]

    Mitchell, Chris

    IY5512: Part 1 1 Information Security Group IY5512 Computer Security Part 1: Introduction to computer security Chris Mitchell me@chrismitchell.net http://www.chrismitchell.net 1 Information Security) ... 2 Information Security Group Agenda · Overview · Security goals · Security approaches ­ prevention

  3. enter part number BNC / RP-BNC

    E-Print Network [OSTI]

    Berns, Hans-Gerd

    enter part number Products 7/16 1.0/2.3 1.6/5.6 AFI AMC BNC / RP-BNC C FAKRA SMB FME HN MCX Mini ------- Product Search ------- Inventory Search Search Results for: 31-10152-RFX Results: 1 - 1 of 1 Part Number. All rights reserved. Copyright | Terms & Conditions | RF E-Mail Client | Contact Us | Amphenol

  4. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, Larry R. (2456 36th St., Los Alamos, NM 87544); Gomez, Veronica M. (Rte. 5 Box 283, Santa Fe, NM 87501); Thomas, Michael H. (Rte. 3-193-1, Espanola, NM 87532)

    1990-01-01T23:59:59.000Z

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing.

  5. Mechanism design with approximate types

    E-Print Network [OSTI]

    Zhu, Zeyuan Allen

    2012-01-01T23:59:59.000Z

    In mechanism design, we replace the strong assumption that each player knows his own payoff type exactly with the more realistic assumption that he knows it only approximately: each player i only knows that his true type ...

  6. Types of Farming in Texas.

    E-Print Network [OSTI]

    Bonnen, C. A.

    1960-01-01T23:59:59.000Z

    .......... .......-.----------------------. 8 Labor -..-.....-----...------------------------------------------------. 9 Land Tenure .--.----....---....--------------------------------- 9 Number and Size of Farms ....----...----.-._--------- 10 Capital... -------------...-------.---------------------------- 21 Hogs -......-....--------------------------------------------------- 22 Poultry .-.---.-.....--.-..------.---------------------------------- 22 Horses and Mules ---..-....---..--..------------------------ 23 Types of Farming and Type-of-farming...

  7. Tornado type wind turbines

    DOE Patents [OSTI]

    Hsu, Cheng-Ting (Ames, IA)

    1984-01-01T23:59:59.000Z

    A tornado type wind turbine has a vertically disposed wind collecting tower with spaced apart inner and outer walls and a central bore. The upper end of the tower is open while the lower end of the structure is in communication with a wind intake chamber. An opening in the wind chamber is positioned over a turbine which is in driving communication with an electrical generator. An opening between the inner and outer walls at the lower end of the tower permits radially flowing air to enter the space between the inner and outer walls while a vertically disposed opening in the wind collecting tower permits tangentially flowing air to enter the central bore. A porous portion of the inner wall permits the radially flowing air to interact with the tangentially flowing air so as to create an intensified vortex flow which exits out of the top opening of the tower so as to create a low pressure core and thus draw air through the opening of the wind intake chamber so as to drive the turbine.

  8. C12 PART IIA and Part IIB C12 MATERIALS SCIENCE AND METALLURGY

    E-Print Network [OSTI]

    Colton, Jonathan S.

    C12 PART IIA and Part IIB C12 MATERIALS SCIENCE AND METALLURGY Course C12: Plasticity Horwood, 1985 Kc38 G.E. Dieter, Mechanical Metallurgy, McGraw-Hill, 1988 Ka62 W.F. Hosford and R

  9. A dependent nominal type theory

    E-Print Network [OSTI]

    Cheney, James

    2012-01-01T23:59:59.000Z

    Nominal abstract syntax is an approach to representing names and binding pioneered by Gabbay and Pitts. So far nominal techniques have mostly been studied using classical logic or model theory, not type theory. Nominal extensions to simple, dependent and ML-like polymorphic languages have been studied, but decidability and normalization results have only been established for simple nominal type theories. We present a LF-style dependent type theory extended with name-abstraction types, prove soundness and decidability of beta-eta-equivalence checking, discuss adequacy and canonical forms via an example, and discuss extensions such as dependently-typed recursion and induction principles.

  10. Ex Parte Communication | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof1-SCORECARD-09-21-11 Page5-03DepartmentParteParteVerticalParte

  11. 11 Life on Herbert Island (part 2)

    E-Print Network [OSTI]

    Leonard, Stephen Pax

    last updated on Monday, 4 April 2011 Accession Form for Individual Recordings: Collection / Collector Name Stephen Leonard Tape No. / Track / Item No. 11 Length of track 45 minutes Title of track Life on Herbert Island (part 2) Translation...

  12. 13 Life on Herbert Island (part 3)

    E-Print Network [OSTI]

    Leonard, Stephen Pax

    last updated on Monday, 4 April 2011 Accession Form for Individual Recordings: Collection / Collector Name Stephen Leonard Tape No. / Track / Item No. 13 Length of track 30 minutes Title of track Life on Herbert Island (part 3) Translation...

  13. 12 Life on Herbert Island (part 1)

    E-Print Network [OSTI]

    Leonard, Stephen Pax

    last updated on Monday, 4 April 2011 Accession Form for Individual Recordings: Collection / Collector Name Stephen Leonard Tape No. / Track / Item No. 12 Length of track 1 hour 35 minutes Title of track Life on Herbert Island (part 1...

  14. Part of speech tagging of Levantine

    E-Print Network [OSTI]

    Monirabbassi, Azadeh

    2008-01-01T23:59:59.000Z

    Linguistic Data Consortium (LDC) [14], consisting of 625,000Treebank (LATB), also from the LDC. ATB is morphologicallywas collected as part of the LDC CALL HOME project [5]. The

  15. Coordinated part delivery using distributed planning

    E-Print Network [OSTI]

    Bolger, Adrienne (Adrienne M.)

    2010-01-01T23:59:59.000Z

    In this thesis, we develop a distributed mobile robot platform to deliver parts around a model construction site. The platform's robots, specialized into delivery robots and assembly robots, use a distributed coverage ...

  16. Sustainability Plan Part I: Strategy and Goals

    E-Print Network [OSTI]

    Escher, Christine

    Sustainability Plan Part I: Strategy and Goals Prepared By: Oregon State University Sustainability University (OSU) Sustainable Facilities Committee (SFC) was established in November, 2004 by the OSU infrastructure and operations toward sustainability. Additionally, the group serves as a discussion forum

  17. Documentation of BioBrick parts

    E-Print Network [OSTI]

    Slomp, Arend

    2010-12-05T23:59:59.000Z

    Purpose of this RFC is to improve the information supplied by BioBrick part vendors. Reason to have this RFC is that there would be much more information available which can help improve the search time of the user. ...

  18. Satellite SAR Remote Sensing of Great Lakes Ice Cover, Part 2. Ice Classification and Mapping

    E-Print Network [OSTI]

    Satellite SAR Remote Sensing of Great Lakes Ice Cover, Part 2. Ice Classification and Mapping° to 60° for all polarizations, was processed to radar cross-section to establish a library of signatures (look-up table) for different ice types. The library is used in the computer classifica- tion

  19. Oxygen permeation in bismuth-based materials part I: Sintering and oxygen permeation fluxes

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 Oxygen permeation in bismuth-based materials part I: Sintering and oxygen permeation fluxes E;2 Abstract Oxygen permeation measurements were performed on two layered bismuth based oxide ceramics. Oxygen permeability for these systems was compared to permeability of the cubic fluorite type structure

  20. On the asymptotic homotopy type of inductive limit Type ...

    E-Print Network [OSTI]

    In this note we exhibit large classes of (projeetionless) stable, nuclear C*- algebras whose asymptotic homotopy type is determined by K-theoretical data.

  1. Fixture for mounting small parts for processing

    DOE Patents [OSTI]

    Foreman, L.R.; Gomez, V.M.; Thomas, M.H.

    1990-05-29T23:59:59.000Z

    A fixture for mounting small parts, such as fusion target spheres or microelectronic components is disclosed. A glass stalk is drawn and truncated near its tip. The truncated end of the glass stalk is dipped into silicone rubber forming an extending streamer. After the rubber cures for approximately 24 hours, a small part is touched to the streamer, and will be held securely throughout processing. 5 figs.

  2. GMT: Texas Map Lab 9 Part 2

    E-Print Network [OSTI]

    Smith-Konter, Bridget

    ), and the grid lines and title (-B), just like you practiced with the pscoast command in previous labs. ·Enter window, type: startxwin.bat. Use the white "X" window that appears to type in the remaining commands;3 Create a new GMT command file · Use the text editor nedit to create a file named make

  3. Mathematical Modeling of a Pulse Combustor of the Helmholtz-type

    E-Print Network [OSTI]

    Vuik, Kees

    Mathematical Modeling of a Pulse Combustor of the Helmholtz-type Interim Report P.A. van Heerbeek and Computer Science Delft Institute of Applied Mathematics Mathematical modeling of a pulse combustor of a pulse combustor of the Helmholtz-type Interim Report #12;#12;Preface This interim report is part of my

  4. Type of Space Bulb Type #/House Fixture Style Greenhouse #

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    Type of Space Bulb Type #/House Fixture Style Greenhouse # 1 Lu 430/Lu 400 24 White box style 2 Lu No bulbs 0 N/A Seed harvest room F32 T8/TL 841 90 bulbs VIGS Room F032 /741/ECO 60 bulbs Chamber Model Bulb

  5. Thermal stress analysis of fused-cast AZS refractories during production; Part 1: Industrial study

    SciTech Connect (OSTI)

    Cockcroft, S.L.; Brimacombe, J.K. (Univ. of British Columbia, Vancouver, British Columbia (Canada). Centre for Metallurgical Process Engineering); Walrod, D.G.; Myles, T.A. (Carborundum Co., Falconer, NY (United States). Monofrax-S Plant)

    1994-06-01T23:59:59.000Z

    A study has been conducted to understand and prevent the formation of cracks in alumina-zirconia-silica (AZS) refractory blocks during solidification processing. A fundamental approach has been taken, centered on the development of a three-dimensional mathematical model to predict heat flow and stress generation in fused-cast AZS refractory blocks. In the first part of a two-part study, the voidless'' casting process has been carefully examined in an industrial setting. From a survey of the distribution, frequency of occurrence, and fracture surface morphology of cracks, an attempt was made to link the crack types found in the study to process variables. In-mold temperature data collected for a single casting throughout the normal cooling period have been used to validate the heat-flow model which is described in Part 2. The stress analysis, cause of the different cracks, and remedial action are also presented in Part 2.

  6. New approaches for modeling type Ia supernovae

    E-Print Network [OSTI]

    Zingale, Michael; Almgren, Ann S.; Bell, John B.; Day, Marcus S.; Rendleman, Charles A.; Woosley, Stan

    2007-01-01T23:59:59.000Z

    runaway in Type Ia supernovae: How to run away? oIgnition in Type Ia Supernovae. II. A Three- dimensionalnumber modeling of type Ia supernovae. I. hydrodynamics.

  7. Purpose Destination Date Parts Labor Costs

    E-Print Network [OSTI]

    Rock, Chris

    Report Previous Month Odometer Lub./ Fluid or Fuel Qty. Cost YearType Trip/Daily Ending Odometer Vehicle as necessary. $ $ $ Fuel/Fluid Type CNG=COMP.NAT.GAS DSL=DIESEL ELE=ELECTRICITY ETH=ETHANOL GAS=UNLEADEDGAS LPG=PROPANE MTH=METHANOL BDL=BIODIESEL Total Costs $ $ $ Fuel data entry must be per transaction A D D A D D #12;

  8. Ex Parte Communication Memorandum | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof1-SCORECARD-09-21-11 Page5-03DepartmentParteParte

  9. Ex Parte Communication | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof1-SCORECARD-09-21-11 Page5-03DepartmentParteParteVertical

  10. Part II - Managerial Competencies: Organizational Representation and

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHA Administrative Judgea. Part B 1 Part B - Requirements

  11. Part IV Council on Environmental Quality

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHA Administrative Judgea. Part B 1 Part B - Requirements79

  12. Regular Type III and Type N Approximate Solutions

    E-Print Network [OSTI]

    Philip Downes; Paul MacAllevey; Bogdan Nita; Ivor Robinson

    2001-05-18T23:59:59.000Z

    New type III and type N approximate solutions which are regular in the linear approximation are shown to exist. For that, we use complex transformations on self-dual Robinson-Trautman metrics rather then the classical approach. The regularity criterion is the boundedness and vanishing at infinity of a scalar obtained by saturating the Bel-Robinson tensor of the first approximation by a time-like vector which is constant with respect to the zeroth approximation.

  13. P-type gallium nitride

    DOE Patents [OSTI]

    Rubin, Michael (Berkeley, CA); Newman, Nathan (Montara, CA); Fu, Tracy (Berkeley, CA); Ross, Jennifer (Pleasanton, CA); Chan, James (Berkeley, CA)

    1997-01-01T23:59:59.000Z

    Several methods have been found to make p-type gallium nitride. P-type gallium nitride has long been sought for electronic devices. N-type gallium nitride is readily available. Discovery of p-type gallium nitride and the methods for making it will enable its use in ultraviolet and blue light-emitting diodes and lasers. pGaN will further enable blue photocathode elements to be made. Molecular beam epitaxy on substrates held at the proper temperatures, assisted by a nitrogen beam of the proper energy produced several types of p-type GaN with hole concentrations of about 5.times.10.sup.11 /cm.sup.3 and hole mobilities of about 500 cm.sup.2 /V-sec, measured at 250.degree. K. P-type GaN can be formed of unintentionally-doped material or can be doped with magnesium by diffusion, ion implantation, or co-evaporation. When applicable, the nitrogen can be substituted with other group III elements such as Al.

  14. P-type gallium nitride

    DOE Patents [OSTI]

    Rubin, M.; Newman, N.; Fu, T.; Ross, J.; Chan, J.

    1997-08-12T23:59:59.000Z

    Several methods have been found to make p-type gallium nitride. P-type gallium nitride has long been sought for electronic devices. N-type gallium nitride is readily available. Discovery of p-type gallium nitride and the methods for making it will enable its use in ultraviolet and blue light-emitting diodes and lasers. pGaN will further enable blue photocathode elements to be made. Molecular beam epitaxy on substrates held at the proper temperatures, assisted by a nitrogen beam of the proper energy produced several types of p-type GaN with hole concentrations of about 5{times}10{sup 11} /cm{sup 3} and hole mobilities of about 500 cm{sup 2} /V-sec, measured at 250 K. P-type GaN can be formed of unintentionally-doped material or can be doped with magnesium by diffusion, ion implantation, or co-evaporation. When applicable, the nitrogen can be substituted with other group III elements such as Al. 9 figs.

  15. Engineering Economy Outline IE 305-Part 2

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    Engineering Economy Outline IE 305-Part 2 Stephen B. Vardeman ISU Fall 2013 Stephen B. Vardeman (ISU) Engineering Economy Outline Fall 2013 1 / 52 #12;Kinds of Production Costs Costs incurred). Stephen B. Vardeman (ISU) Engineering Economy Outline Fall 2013 2 / 52 #12;Costs and Production Volume

  16. Engineering Economy Outline IE 305-Part 1

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    Engineering Economy Outline IE 305-Part 1 Stephen B. Vardeman ISU Fall 2013 Stephen B. Vardeman (ISU) Engineering Economy Outline Fall 2013 1 / 53 #12;THE Basics The very basic notion that governs) Engineering Economy Outline Fall 2013 2 / 53 #12;Solving for P The (N

  17. Examen de Algebra Segunda Parte: Metodos numericos

    E-Print Network [OSTI]

    Rocha, Jairo

    Examen de Algebra Segunda Parte: M´etodos num´ericos 29 de junio de 2011 Resuelve tres de los) = 3, dx dt (0) = -5. Transf´ormala a un sistema lineal y aplica RK4 con longitud de paso h = 0.1 para

  18. Yearly Report___________________________________________________________ 93 Part III: Activity Data

    E-Print Network [OSTI]

    Perkins, Richard A.

    .M. Rappoport, "Algorithms and Codes for the Macdonald Function: Recent Progress and Comparisons," Journal Statistical Analysis of Test Parts Manufactured in Production Environments," ASME Journal of Manufacturing'Leary, "Deconvolving LADAR Images of Bar Codes for Construction Site Object Recognition," Journal of Automation

  19. Engineering Part IB P8 Elective (2)

    E-Print Network [OSTI]

    Talbot, James P.

    for wind turbines, including effects of scale · To introduce composites manufacturing routes for turbine1 Engineering Part IB P8 ­ Elective (2) Engineering for Renewable Energy Systems Wind Turbines for Design of Wind Turbines, DNV/Risoe Publication, ISBN 8755028705 http://www.sandia.gov/wind/ http

  20. Heart Physiology Lab Part 1: Pulse Rate

    E-Print Network [OSTI]

    Loughry, Jim

    Heart Physiology Lab Part 1: Pulse Rate Measure your pulse in each of the following conditions (in in the class. You may use Table 1 in the Heart Physiology Worksheet for this, if you wish. Once you have all of the class averages for each measurement. You may use Graph 1 in the Heart Physiology Worksheet for this

  1. APPLICATION FOR ADMISSION Part-time Program

    E-Print Network [OSTI]

    Martin, Jeff

    ) related to this program area: Professional designation(s): 275 Portage Avenue | Winnipeg | Manitoba | R3B research into program enrolment and related statistical profiling activities. If you have any questionsAPPLICATION FOR ADMISSION Part-time Program ADMISSION REQUIREMENTS: To qualify for admission

  2. Neurons and Neural Transmission Part I / IV

    E-Print Network [OSTI]

    of neurons ­ Classification of neurons ­ Neuron Doctrine "Father of modern neuroscience" #12;Ramon y CajalNeurons and Neural Transmission Part I / IV Anton Kapliy February 24, 2009 #12;Nervous system of optical nerve #12;Ramon y Cajal's neurons Information in neurons flows in one direction: "from dendrites

  3. Experimental Number Theory Part I : Tower Arithmetic

    E-Print Network [OSTI]

    Zeilberger, Doron

    Experimental Number Theory Part I : Tower Arithmetic by Edinah K. Gnang January 15, 2011 1 rooted trees, which we shall here refer to as towers. The bijection between numbers and towers provides by XXX = (xk)1kn , (1) a tower expansion ( or simply a tower ) over XXX is a finite product of iterated

  4. Ace ble Parts t This report contains a list of electronic common parts which

    E-Print Network [OSTI]

    Rathbun, Julie A.

    for application in ALSEP equipment. The principle factors in listing these parts is the reliability Application and Reliability Bulletin" Vols. I & II. Prepared by j)ftJ/d(~} k/-- P. Sondee.1 HO. ALSEP Parts & Mat'ls Group Supervisor Approved by · '-1 ~~ :.e-(' ~~-r't. s. Ellison ALSEP Reliability & Quality

  5. Part I. Ecological Sites and Soil Part II. A Framework for Soil and

    E-Print Network [OSTI]

    Part I. Ecological Sites and Soil Survey Part II. A Framework for Soil and Vegetation Dynamics Arlene Tugel, Soil Scientist Liaison to ARS, USDA-NRCS Las Cruces, NM and the Soils-ESD Advisory Group #12;What makes a site a site? Soil forming factors: climate, parent, material, biotic factors

  6. Blade System Design Study. Part II, final project report (GEC).

    SciTech Connect (OSTI)

    Griffin, Dayton A. (DNV Global Energy Concepts Inc., Seattle, WA)

    2009-05-01T23:59:59.000Z

    As part of the U.S. Department of Energy's Low Wind Speed Turbine program, Global Energy Concepts LLC (GEC)1 has studied alternative composite materials for wind turbine blades in the multi-megawatt size range. This work in one of the Blade System Design Studies (BSDS) funded through Sandia National Laboratories. The BSDS program was conducted in two phases. In the Part I BSDS, GEC assessed candidate innovations in composite materials, manufacturing processes, and structural configurations. GEC also made recommendations for testing composite coupons, details, assemblies, and blade substructures to be carried out in the Part II study (BSDS-II). The BSDS-II contract period began in May 2003, and testing was initiated in June 2004. The current report summarizes the results from the BSDS-II test program. Composite materials evaluated include carbon fiber in both pre-impregnated and vacuum-assisted resin transfer molding (VARTM) forms. Initial thin-coupon static testing included a wide range of parameters, including variation in manufacturer, fiber tow size, fabric architecture, and resin type. A smaller set of these materials and process types was also evaluated in thin-coupon fatigue testing, and in ply-drop and ply-transition panels. The majority of materials used epoxy resin, with vinyl ester (VE) resin also used for selected cases. Late in the project, testing of unidirectional fiberglass was added to provide an updated baseline against which to evaluate the carbon material performance. Numerous unidirectional carbon fabrics were considered for evaluation with VARTM infusion. All but one fabric style considered suffered either from poor infusibility or waviness of fibers combined with poor compaction. The exception was a triaxial carbon-fiberglass fabric produced by SAERTEX. This fabric became the primary choice for infused articles throughout the test program. The generally positive results obtained in this program for the SAERTEX material have led to its being used in innovative prototype blades of 9-m and 30-m length, as well as other non-wind related structures.

  7. Part-based Probabilistic Point Matching using Equivalence Constraints 

    E-Print Network [OSTI]

    McNeill, Graham; Vijayakumar, Sethu

    Correspondence algorithms typically struggle with shapes that display part-based variation. We present a probabilistic approach that matches shapes using independent part transformations, where the parts themselves are ...

  8. Gas Turbine Technology, Part B: Components, Operations and Maintenance

    E-Print Network [OSTI]

    Meher-Homji, C. B.; Focke, A. B.

    , single and split shaft. The pros and cons of different types are reviewed. Gas turbine component types - axial and centrifugal compressors and different turbine types, along with combustor types will be discussed. Important considerations during machine...

  9. Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    PART 835-OCCUPATIONAL RADIATION PROTECTION Subpart A - General Provisions Code of Federal Regulations PART 835-OCCUPATIONAL RADIATION PROTECTION Subpart A - General Provisions The...

  10. EECBG Success Story: Energy Efficiency Upgrades Part of Winning...

    Office of Environmental Management (EM)

    Energy Efficiency Upgrades Part of Winning Formula for Oregon School District EECBG Success Story: Energy Efficiency Upgrades Part of Winning Formula for Oregon School District...

  11. Energy Department Announces New Initiatives as Part of Administration...

    Energy Savers [EERE]

    Announces New Initiatives as Part of Administration's Clean Energy Investment Summit Energy Department Announces New Initiatives as Part of Administration's Clean Energy Investment...

  12. On synchronous robotic networks - Part I: Models, tasks, and complexity

    E-Print Network [OSTI]

    Frazzoli, Emilio; Bullo, Francesco; Cortes, Jorge; Martinez, Sonia

    2007-01-01T23:59:59.000Z

    E. Frazzoli, “On synchronous robotic networks Part II: Timeto control design for mobile robotic networks. Application2007 On Synchronous Robotic Networks—Part I: Models, Tasks,

  13. Building America Webinar: HVAC Right-Sizing Part 1-Calculating...

    Energy Savers [EERE]

    HVAC Right-Sizing Part 1-Calculating Loads Building America Webinar: HVAC Right-Sizing Part 1-Calculating Loads During this webinar, Building America Research Team IBACOS...

  14. H2A Delivery: Forecourt Compression & Storage Optimization (Part...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H2A Delivery: Forecourt Compression & Storage Optimization (Part II) H2A Delivery: Forecourt Compression & Storage Optimization (Part II) Presentation by Matthew Hooks of TIAX at...

  15. H2A Delivery: Forecourt Compression & Storage Optimization (Part...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    H2A Delivery: H2A Delivery: Forecourt Compression & Forecourt Compression & Storage Optimization (Part II) Storage Optimization (Part II) Hydrogen Delivery Analysis Meeting May...

  16. A numerical study of steady-state vortex configurations and vortex pinning in type-II superconductors

    E-Print Network [OSTI]

    Kim, Sangbum

    2006-04-12T23:59:59.000Z

    In part I, a numerical study of the mixed states in a mesoscopic type-II superconducting cylinder is described. Steady-state configurations and transient behavior of the magnetic vortices for various values of the applied magnetic field H...

  17. A numerical study of steady-state vortex configurations and vortex pinning in type-II superconductors 

    E-Print Network [OSTI]

    Kim, Sangbum

    2006-04-12T23:59:59.000Z

    In part I, a numerical study of the mixed states in a mesoscopic type-II superconducting cylinder is described. Steady-state configurations and transient behavior of the magnetic vortices for various values of the applied ...

  18. Examen de Algebra Segunda Parte: Metodos numericos

    E-Print Network [OSTI]

    Rocha, Jairo

    Examen de Algebra Segunda Parte: M´etodos num´ericos 14 de junio de 2012 Resuelve los siguientes, empleando interpolaci´on lineal, cuadr´atica y c´ubica. (opera con seis decimales, con redondeo, y da los segundo orden d2 x dt2 - 5 dx dt + 8x = 0, x(0) = 1, dx dt (0) = -1. Transf´ormala a un sistema lineal y

  19. Part 18, Authors: X To Zyukov

    E-Print Network [OSTI]

    Humphrey, Judith M.; Hassall, Albert; Doss, Mildred A.

    1952-01-01T23:59:59.000Z

    15-17).?Proceedings of the Eighteenth Annual Conference for Veterinarians. College of Veterinary Medicine. June 15-17, 1949, Columbus, Ohio. Rae. Opuse. Scient, e Filol., Venezia.?Raccolta di Opuscoli Scientifici et Filologico. Venezia. Research... of Purdue University. KEY TO SERIAL ABBREVIATIONS [Continued from part 17] Agricoltura Colon.?L'Agricoltura Coloniale. Or- gano Mensile dell'Istituto Agricolo Coloniale Italiano. Firenze. Ann ? toi. Rhinol, and Laryngol.?Annals of Otology, Rhinology...

  20. This article is part of the Porphyrins &

    E-Print Network [OSTI]

    Shelnutt, John A.

    and cations. Herein, we report CBI nanocomposites formed by growing nanoparticles of one type of porphyrin CBI nanocomposites that can carry out multiple, spatially prescribed functions like those necessary water to H2.1e The synthetic procedure developed produces the first hier- archical hybrid CBI structures

  1. Sensitivity of Climate to Diapycnal Diffusivity: Part I. Equilibrium State; Part II. Global Warming Scenario

    E-Print Network [OSTI]

    Dalan, Fabio.

    Part I: The diapycnal diffusivity in the ocean is one of the least known parameters in current climate models. Measurements of this diffusivity are sparse and insufficient for compiling a global map. Inferences from inverse ...

  2. Type Ia Supernova Explosion Models

    E-Print Network [OSTI]

    W. Hillebrandt; J. C. Niemeyer

    2000-06-21T23:59:59.000Z

    Because calibrated light curves of Type Ia supernovae have become a major tool to determine the local expansion rate of the Universe and also its geometrical structure, considerable attention has been given to models of these events over the past couple of years. There are good reasons to believe that perhaps most Type Ia supernovae are the explosions of white dwarfs that have approached the Chandrasekhar mass, M_ch ~ 1.39 M_sun, and are disrupted by thermonuclear fusion of carbon and oxygen. However, the mechanism whereby such accreting carbon-oxygen white dwarfs explode continues to be uncertain. Recent progress in modeling Type Ia supernovae as well as several of the still open questions are addressed in this review. Although the main emphasis will be on studies of the explosion mechanism itself and on the related physical processes, including the physics of turbulent nuclear combustion in degenerate stars, we also discuss observational constraints.

  3. Rotating electric machine with fluid supported parts

    DOE Patents [OSTI]

    Smith, Jr., Joseph L. (Concord, MA); Kirtley, Jr., James L. (Brookline, MA)

    1981-01-01T23:59:59.000Z

    A rotating electric machine in which the armature winding thereof and other parts are supported by a liquid to withstand the mechanical stresses applied during transient overloads and the like. In particular, a narrow gap is provided between the armature winding and the stator which supports it and this gap is filled with an externally pressurized viscous liquid. The liquid is externally pressurized sufficiently to balance the static loads on the armature winding. Transient mechanical loads which deform the armature winding alter the gap dimensions and thereby additionally pressurize the viscous liquid to oppose the armature winding deformation and more nearly uniformly to distribute the resulting mechanical stresses.

  4. Ex Parte Memo July 18, 2012.docx

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011AT&T,OfficeEnd of Year 2010Salt | Department ofEvaluationofin11, 2012Parte Memo -

  5. Ex Parte Communication Memo | Department of Energy

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof1-SCORECARD-09-21-11 Page5-03DepartmentParte Communication

  6. Property:PartOf | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag Jump to: navigation,ProjectStartDateProperty EditResultsUtilityPartOf Jump to:

  7. PART ONE INTRODUCTION ARTICLE I. JURISDICTION

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645U.S. DOE Office of Science (SC)IntegratedSpeeding access toTest andOptimize832 2.860 2.864 2.867039 J - 1 PART III

  8. Part IV: Section D: Packaging and Marketing

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79D

  9. Part IV: Section E: Inspection and Acceptance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79D

  10. Part IV: Section F: Deliveries and Performance

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79DF

  11. Part IV: Section G: Contract Administration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79DFG

  12. Part V: Section H: Special Contract Requirements

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79DFG

  13. Part VI: Section I: Contract Clause

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn'tOrigin of Contamination in235-1 Termoelectrica U.SPRESS FACTBiofuels1ofHannoPAa. Part B 1C79DFGII

  14. Ex parte Communication Memo | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels DataDepartment of Energy Your Density Isn't Your Destiny:RevisedAdvisoryStandardGeneration |10 DOEGoalsEvaluation11ofExStaff membersEx parte

  15. Method of forming and assembly of metal and ceramic parts

    DOE Patents [OSTI]

    Ripley, Edward B

    2014-04-22T23:59:59.000Z

    A method of forming and assembling at least two parts together that may be metal, ceramic, or a combination of metal and ceramic parts. Such parts may have different CTE. Individual parts that are formed and sintered from particles leave a network of interconnecting porosity in each sintered part. The separate parts are assembled together and then a fill material is infiltrated into the assembled parts using a method such as capillary action, gravity, and/or pressure. The assembly is then cured to yield a bonded and fully or near-fully dense part that has the desired physical and mechanical properties for the part's intended purpose. Structural strength may be added to the parts by the inclusion of fibrous materials.

  16. Country Scotland Type Single malt

    E-Print Network [OSTI]

    Izzard, Rob

    Country Scotland Type Single malt Distillery Aberfeldy Region Highlands Age 12 years ABV 40% Cask, the perfume characteristics become more spicy, with a bitter hint of Seville oranges in a decidedly dry finish. Drying citrus/oak with a gentle spiciness, held in a warm embrace of cigar smoke, and a little vanilla

  17. Country Scotland Type Single malt

    E-Print Network [OSTI]

    Izzard, Rob

    Country Scotland Type Single malt Distillery Jura Region Island Name Prophecy ABV 46 Cask French airport Notes Limited annual release: 10,000 bottles only. Nose Some peat, aniseed, oily, dry, pungent, dried hay, and anise round things out. Palate Smoky and dry, a muscular, powerful Jura with notes

  18. Part I STATISTICAL PHYSICS 1 Statistical Physics

    E-Print Network [OSTI]

    unknown authors

    In this first part of the book we shall study aspects of classical statistical physics that every physicist should know, but are not usually treated in elementary thermodynamics courses. Our study will lay the microphysical (particle-scale) foundations for the continuum physics of Parts II—VI. As a central feature of our approach, we shall emphasize the intimate connections between the relativistic formulation of statistical physics and its nonrelativistic limit, and between quantum statistical physics and the classical theory. Throughout, we shall presume that the reader is familiar with elementary thermodynamics, but not with other aspects of statistical physics. In Chap. 2 we will study kinetic theory — the simplest of all formalisms for analyzing systems of huge numbers of particles (e.g., molecules of air, or neutrons diffusing through a nuclear reactor, or photons produced in the big-bang origin of the Universe). In kinetic theory the key concept is the “distribution function ” or “number density of particles in phase space”, N; i.e., the number of particles per unit 3-dimensional volume of ordinary space and per unit 3-dimensional volume of momentum space. Despite first appearances, N turns out to be a geometric, frame-independent entity. This N and the frame-independent laws it

  19. Part I STATISTICAL PHYSICS 1 Statistical Physics

    E-Print Network [OSTI]

    unknown authors

    2004-01-01T23:59:59.000Z

    In this first part of the book we shall study aspects of classical statistical physics that every physicist should know, but are not usually treated in elementary thermodynamics courses. Our study will lay the microphysical (particle-scale) foundations for the continuum physics of Parts II—VI. As a central feature of our approach, we shall emphasize the intimate connections between the relativistic formulation of statistical physics and its nonrelativistic limit, and between quantum statistical physics and the classical theory. Throughout, we shall presume that the reader is familiar with elementary thermodynamics, but not with other aspects of statistical physics. In Chap. 2 we will study kinetic theory — the simplest of all formalisms for analyzing systems of huge numbers of particles (e.g., molecules of air, or neutrons diffusing through a nuclear reactor, or photons produced in the big-bang origin of the Universe). In kinetic theory the key concept is the “distribution function ” or “number density of particles in phase space”, N; i.e., the number of particles per unit 3-dimensional volume of ordinary space and per unit 3-dimensional volume of momentum space. Despite first appearances, N turns out to be a geometric, frame-independent entity. This N and the frame-independent laws it

  20. Part I STATISTICAL PHYSICS 1 Statistical Physics

    E-Print Network [OSTI]

    unknown authors

    In this first part of the book we shall study aspects of classical statistical physics that every physicist should know but are not usually treated in elementary thermodynamics courses. This study will lay the microphysical (particle-scale) foundations for the continuum physics of Parts II—VI. Throughout, we shall presume that the reader is familiar with elementary thermodynamics, but not with other aspects of statistical physics. As a central feature of our approach, we shall emphasize the intimate connections between the relativistic formulation of statistical physics and its nonrelativistic limit, and between quantum statistical physics and the classical theory. Chapter 2 will deal with kinetic theory, which is the simplest of all formalisms for studying systems of huge numbers of particles (e.g., molecules of air, or neutrons diffusing through a nuclear reactor, or photons produced in the big-bang origin of the Universe). In kinetic theory the key concept is the “distribution function ” or “number density of particles in phase space”, N; i.e., the number of particles per unit 3-dimensional volume of ordinary space and per unit 3-dimensional volume of momentum space. Despite first appearances, N turns out to be a geometric, frame-independent entity. This N and the laws it obeys provide

  1. Systems Thinking "Systems thinking looks at the whole, and the parts, and the connections between the parts,

    E-Print Network [OSTI]

    Hayden, Nancy J.

    Systems Thinking "Systems thinking looks at the whole, and the parts, and the connections between that something is simply the sum of its parts. A collection of parts that do not connect is not a system. It is a heap" (O'Connor and McDermott 1997). A system, then, is a set of interrelated parts that make up

  2. Automatic Utterance Type Detection Using Suprasegmental Features 

    E-Print Network [OSTI]

    Wright, Helen

    that different types of utterances have different suprasegmental characteristics. The categorisation of these utterance types is based on the theory of conversation games and consists of 12 move types (e.g. reply to a question, wh-question, acknowledgement...

  3. Development of a cold cathode ion source for a mass spectrometer type vacuum leak detector

    E-Print Network [OSTI]

    Thomas, Harold Albert

    1947-01-01T23:59:59.000Z

    of about 7 cm., discharge voltage of about 2000 volts, discharge current of 10 ma., and a magnetic field strength of approximately 2200 Oersteds. As a leak detector it had a differential sensitivity of one part of helium in 10,000 parts of air ? about... for this ion souree as for the first type tested# Be? cause of the simpler construction and fewer components reauired, it appears that this type of source would have some valuable possibili? ties as a mass spectrometer ion source for the leak detector...

  4. EARLY EMISSION FROM TYPE Ia SUPERNOVAE

    SciTech Connect (OSTI)

    Rabinak, Itay; Waxman, Eli [Department of Particle Physics and Astrophysics, Weizmann Institute of Science, Rehovot 76100 (Israel); Livne, Eli, E-mail: itay.rabinak@weizmann.ac.il [Racah Institute of Physics, Hebrew University, Jerusalem (Israel)

    2012-09-20T23:59:59.000Z

    A unique feature of deflagration-to-detonation (DDT) white dwarf explosion models of supernovae of type Ia is the presence of a strong shock wave propagating through the outer envelope. We consider the early emission expected in such models, which is produced by the expanding shock-heated outer part of the ejecta and precedes the emission driven by radioactive decay. We expand on earlier analyses by considering the modification of the pre-detonation density profile by the weak shocks generated during the deflagration phase, the time evolution of the opacity, and the deviation of the post-shock equation of state from that obtained for radiation pressure domination. A simple analytic model is presented and shown to provide an acceptable approximation to the results of one-dimensional numerical DDT simulations. Our analysis predicts a {approx}10{sup 3} s long UV/optical flash with a luminosity of {approx}1 to {approx}3 Multiplication-Sign 10{sup 39} erg s{sup -1}. Lower luminosity corresponds to faster (turbulent) deflagration velocity. The luminosity of the UV flash is predicted to be strongly suppressed at t > t{sub drop} {approx} 1 hr due to the deviation from pure radiation domination.

  5. Pacies (Part Code Identification Expert System): an expert system to generate part codes for the selection of small part feeding and orienting devices for use in automatic assembly 

    E-Print Network [OSTI]

    Chen, Yu-Tong

    1985-01-01T23:59:59.000Z

    Coding System B: Existing Expert Systems C: Listing of Consultation Driver D: Listing of the Knowledge Base E: Listing of SIMPLE Front-End Relations F: Procedure to Log on the System G: Procedure to Query the Same Question VITA 74 78 79 90 104... look-up, generates a three-digit part code for a part based upon its shape, important features, and symmetries. The part code is used in a table look-up procedure to determine the proper feeding and orienting device for the part. Hence, the part...

  6. RCRA/UST, superfund, and EPCRA hotline training module. Introduction to: Used oil (40 CFR part 266, subparts E, and part 279) updated as of 1995

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    The module provides an overview of the used oil management program and explains the different regulatory scenarios that can apply to used oil. It distinguishes between Used Oil Management Standards of Part 279 and the former Used Oil Regulations under Part 266, Subpart E. It identifies the different types of used oil handlers and their requirements under the used oil management standards, and summarizes the requirements for the used oil handlers under the former program. It explains the difference between on- and off-specification used oil and distinguishes between the recycling presumption and the rebuttable presumption. It describes how present regulations will become effective in both authorized and unauthorized states. It explains under what circumstances used oil filters may be disposed of as non-hazardous. It also describes four pathways of potential regulation of used oil under the former program and compares differences with the present used oil management standards.

  7. Method for measuring the contour of a machined part

    DOE Patents [OSTI]

    Bieg, L.F.

    1995-05-30T23:59:59.000Z

    A method is disclosed for measuring the contour of a machined part with a contour gage apparatus, having a probe assembly including a probe tip for providing a measure of linear displacement of the tip on the surface of the part. The contour gage apparatus may be moved into and out of position for measuring the part while the part is still carried on the machining apparatus. Relative positions between the part and the probe tip may be changed, and a scanning operation is performed on the machined part by sweeping the part with the probe tip, whereby data points representing linear positions of the probe tip at prescribed rotation intervals in the position changes between the part and the probe tip are recorded. The method further allows real-time adjustment of the apparatus machining the part, including real-time adjustment of the machining apparatus in response to wear of the tool that occurs during machining. 5 figs.

  8. Tridiagonal pairs of Krawtchouk type

    E-Print Network [OSTI]

    Ito, Tatsuro

    2007-01-01T23:59:59.000Z

    Let $K$ denote an algebraically closed field with characteristic 0 and let $V$ denote a vector space over $K$ with finite positive dimension. Let $A,A^*$ denote a tridiagonal pair on $V$ with diameter $d$. We say that $A,A^*$ has Krawtchouk type whenever the sequence $\\lbrace d-2i\\rbrace_{i=0}^d$ is a standard ordering of the eigenvalues of $A$ and a standard ordering of the eigenvalues of $A^*$. Assume $A,A^*$ has Krawtchouk type. We show that there exists a nondegenerate symmetric bilinear form $$ on $V$ such that $= $ and $= $ for $u,v\\in V$. We show that the following tridiagonal pairs are isomorphic: (i) $A,A^*$; (ii) $-A,-A^*$; (iii) $A^*,A$; (iv) $-A^*,-A$. We give a number of related results and conjectures.

  9. Abstract DNA-type systems

    E-Print Network [OSTI]

    Diederik Aerts; Marek Czachor

    2005-12-22T23:59:59.000Z

    An abstract DNA-type system is defined by a set of nonlinear kinetic equations with polynomial nonlinearities that admit soliton solutions associated with helical geometry. The set of equations allows for two different Lax representations: A von Neumann form and a Darboux-covariant Lax pair. We explain why non-Kolmogorovian probability models occurring in soliton kinetics are naturally associated with chemical reactions. The most general known characterization of soliton kinetic equations is given and a class of explicit soliton solutions is discussed. Switching between open and closed states is a generic behaviour of the helices. The effect does not crucially depend on the order of nonlinearity (i.e. types of reactions), a fact that may explain why simplified models possess properties occuring in realistic systems. We explain also why fluctuations based on Darboux transformations will not destroy the dynamics but only switch between a finite number of helical structures.

  10. Economics of PPP-insulated pipe-type cable: Final report

    SciTech Connect (OSTI)

    Ernst, A.

    1987-10-01T23:59:59.000Z

    This study has been designed to establish the economic range of application and the potential cost advantage of PPP-insulated pipe-type cable compared with presently utilized paper-insulated designs. The study is in two parts. In the first part the electrical and thermal characteristics of a range of cable sizes are tabulated. This data can be utilized for planning and economic comparison purposes. In the second part 12 transmission load scenarios are studied to determine the relative cost of various designs considering materials, installation and the losses over a wide range of assumptions.

  11. Means-ends and whole-part traceability analysis of safety requirements Jang-Soo Lee a,*, Vikash Katta b

    E-Print Network [OSTI]

    Jee, Eunkyoung

    . Most of the safety-critical systems in nuclear power plants and airplanes for example, have this typeMeans-ends and whole-part traceability analysis of safety requirements Jang-Soo Lee a,*, Vikash Katta b , Eun-Kyoung Jee c , Christian Raspotnig b a Korea Atomic Energy Research Institute, Daejeon

  12. Composites Part A, 34, 979-986 (2003) Author prepared reprint Hygrothermal Aging of Polyimide Matrix Composite Laminates

    E-Print Network [OSTI]

    Nairn, John A.

    2003-01-01T23:59:59.000Z

    Composites Part A, 34, 979-986 (2003) Author prepared reprint Hygrothermal Aging of Polyimide of Utah, Salt Lake City, Utah 84112, USA ABSTRACT Two polyimide-matrix systems (Avimid R K3B/IM7 and PETI; accelerated test method; hygrothermal stability. Introduction Various types of polyimide-matrix composites

  13. Three-part auctions versus self-commitment in day-ahead electricity markets Ramteen Sioshansi a

    E-Print Network [OSTI]

    Oren, Shmuel S.

    2010 Keywords: Day-ahead electricity market Centralized market Unit commitment Self they are online. Other types of generating units, such as combined-cycle gas turbines (CCGT) and cascadedThree-part auctions versus self-commitment in day-ahead electricity markets Ramteen Sioshansi

  14. Subcellular characterization of four sorghum lines that differ in endosperm texture and type 

    E-Print Network [OSTI]

    Sullins, Richard Don

    1972-01-01T23:59:59.000Z

    SUj3CELLULAR CHARACTERIZATION OF FOUR SORGHUM LINES THAT DIFFER IN ENDOSPERM TEXTURE AND TYPE A lhesis by RIG&LARD DON SULLIES Submitted to the Graduate College of Texas Ak? University in part, ial fulfillment of' the requirement f...: man of' o ittee (Head of' Department (Member Member Member (Me er August 1972 ABSTRACT Subcellular Characterization of Four Sorghum Lines That Differ in Fndosperm Texture and Type. (August 1972) Richard Don Sullins, B. S. , Texas A8d4...

  15. The Wal-Mart Experience, Part Two

    SciTech Connect (OSTI)

    Deru, Michael [National Renewable Energy Laboratory (NREL); MacDonald, J Michael [ORNL

    2007-01-01T23:59:59.000Z

    In 2005, Wal-Mart opened major experimental stores in McKinney, Texas, and Aurora, Colo. These two stores incorporate several experiments using recycled materials and energy-saving technologies. Over the three-year period from 2006-2008, the performance of the experiments will be evaluated and lessons learned generated. The National Renewable Energy Laboratory (NREL) is monitoring the Colorado stores, and the Oak Ridge National Laboratory (ORNL) is monitoring the Texas stores. The construction and evaluation of these stores are part of a commitment to sustainability by Wal-Mart. The evaluation also includes monitoring typical Wal-Mart supercenters for a reference case in close proximity to the experimental stores.

  16. Absorption chillers: Part of the solution

    SciTech Connect (OSTI)

    Occhionero, A.J. (American Gas Cooling Center, Arlington, VA (United States)); Hughes, P.J. (Oak Ridge National Lab., TN (United States)); Reid, E.A. (Columbia Gas Distribution Co., Columbus, OH (United States))

    1991-01-01T23:59:59.000Z

    Acid rain, ozone depletion, global warming, and implementation economics are considered as they relate to the advisability of expanding the application of absorption chillers. Introductory and background information are provided to put the discussion in the proper context. Then all four issues are discussed separately as they relate to absorption chillers. Acid rain and ozone depletion concerns, and implementation economics, are found to support the expanded use of absorption chillers. The global warming concern is found to be more of a gray area, but the areas of benefit correspond well with the conditions of greatest economic advantage. All things considered, absorption chillers are believed to be part of the environmental and economic solution. It is further believed that integrated resource planning (IRP) processes that consider electric and gas technologies on an equal footing would come to the same conclusion for many regions of the United States. 9 refs., 3 tabs.

  17. Continued force wear and part correction experiments

    SciTech Connect (OSTI)

    Hannah, P.R.; Day, R.D.; Hatch, D.J. [Los Alamos National Lab., NM (United States)] [and others

    1995-12-31T23:59:59.000Z

    This abstract reports the near completion of the first phase of this program. It is the aim of this program to provide the operator of a N/C diamond turning machine or N/C grinding machine (jig grinder) with the wear characteristics necessary to achieve uniform material removal. The second phase of this program addresses a different problem, although solving this problem is highly dependent on the results of the first phase. Diamond turned, or any lathe turned surface, exhibits regular tool marks due to the tool passing over the surface being cut. Changes in depth of cut, feed rate and work rpm will change the character of these groves, but will not eliminate them. Optical surfaces produced by this process exhibit increased scattering as the light wavelength decreases limiting their use; at least for optical purposes, to IR and some visible applications. Utilizing wear information gathered in the first part of this program we will attempt to reduce these residual tool marks by polishing. The polishing of diamond turned surfaces is not new. Diamond turned metal surfaces, especially in electroless nickel and high phosphorus nickel electroplate have been polished to improve their scatter characteristics. What we believe is unique is the use of a spherical wheel, rotating on axis and being moved over the part in a prescribed manner by numerical control. Over the past year we have made some major changes in our polishing methods and procedures. We have listed below these changes, as a refresher for the reader as to our previous procedures.

  18. Your World Magazine - Microbes: Parts and Potential

    SciTech Connect (OSTI)

    Biotechnology Institute

    2005-04-01T23:59:59.000Z

    Microorganisms are tiny, but together, they make up more than 60 percent of the earth's living matter. Often people think only of bacteria when they talk about microbes, but viruses, fungi, protozoa, and microalgae are also microbes. Scientists estimate that there are 2 to 3 billion species of microorganisms. By learning what genes microbes contain and how they are arranged, what they do, and how they are expressed, researchers get a better grasp on how microbes have evolved, new possibilities for diagnosing and treating diseases, and ideas for ways to clean up the environment and produce energy. You can be a part of this exciting work in many ways. Figuring out the genes in microbes, or microbial genomics, is a field that gets a lot of help from computer science and mathematics. You could go into bioinformatics, which uses computers to collect and sort information about living matter. Or you could try computational modeling and help develop simple models of what an organism would look like and how it would function. Researchers want to understand microbes genetics well enough to build useful ones. As we move toward that possibility, we need to think about how that ability can be used wisely or poorly. Enjoy learning about microbial genomics in this issue of Your World, and think about what part you'd like to take in exploring this vital field. Some current uses of microbes are: (1) Saccharomyces cerevisiae (baker's yeast) - produces the CO{sub 2} that makes bread rise and is also used to make beer; (2) Streptomyces - soil bacteria that make streptomycin, an antibiotic, used to treat infections; (3) Pseudomonas putida - one of many microbes used to clean wastes from sewage at water treatment plants; (4) Escherichia coli - one of many kinds of microbes that live in your gut and help digest your food; and (5) Bacillus thuringiensis - a common soil bacterium that acts as a natural pest-killer in gardens and on crops.

  19. Training manual for precision hand deburring, Part 3

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1981-03-01T23:59:59.000Z

    This publication is Part 3 of a 4 part training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day along with six additional hours of bench work in deburring. This part describes mounted stones, scrapers, hand stones, abrasive filled rubber and cotton tools, abrasive paper products, felt bobs and lapping compounds, mandrels and arbors, miscellaneous tools, personal techniques for assuring quality, cleaning parts, and deburring gears and plastic parts.

  20. Complete genome sequence of Thermomonospora curvata type strain (B9)

    SciTech Connect (OSTI)

    Chertkov, Olga [Los Alamos National Laboratory (LANL); Sikorski, Johannes [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Glavina Del Rio, Tijana [Joint Genome Institute, Walnut Creek, California; Tice, Hope [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Ovchinnikova, Galina [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Ngatchou, Olivier Duplex [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Brettin, Thomas S [ORNL; Han, Cliff [Los Alamos National Laboratory (LANL); Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California

    2011-01-01T23:59:59.000Z

    Thermomonospora curvata Henssen 1957 is the type species of the genus Thermomonospora. This genus is of interest because members of this clade are sources of new antibiotics, enzymes, and products with pharmacological activity. In addition, members of this genus participate in the active degradation of cellulose. This is the first complete genome sequence of a member of the family Thermomonosporaceae. Here we describe the features of this organism, together with the complete genome sequence and annotation. The 5,639,016 bp long genome with its 4,985 protein-coding and 76 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  1. Infinite calculus and Types ? Alessandro Berarducci

    E-Print Network [OSTI]

    Torino, Università di

    and functional programming'' held in Torino, ? Partly supported by ESPRIT BRA 7232 GENTZEN and by NATO Grant

  2. Searches for Rare and New Types of Objects

    E-Print Network [OSTI]

    Djorgovski, S G; Brunner, R J; Gal, R R; Castro, S; De Carvalho, R R; Odewahn, S C

    2000-01-01T23:59:59.000Z

    Systematic exploration of the observable parameter space, covered by large digital sky surveys spanning a range of wavelengths, will be one of the primary modes of research with a Virtual Observatory (VO). This will include searches for rare, unusual, or even previously unknown types of astronomical objects and phenomena, e.g. as outliers in some parameter space of measured properties, both in the catalog and image domains. Examples from current surveys include high-redshift quasars, type-2 quasars, brown dwarfs, and a small number of objects with puzzling spectra. Opening of the time domain will be especially interesting in this regard. Data-mining tools such as unsupervised clustering techniques will be essential in this task, and should become an important part of the VO toolkit.

  3. Searches for Rare and New Types of Objects

    E-Print Network [OSTI]

    S. G. Djorgovski; A. A. Mahabal; R. J. Brunner; R. R. Gal; S. Castro; R. R. de Carvalho; S. C. Odewahn

    2000-12-21T23:59:59.000Z

    Systematic exploration of the observable parameter space, covered by large digital sky surveys spanning a range of wavelengths, will be one of the primary modes of research with a Virtual Observatory (VO). This will include searches for rare, unusual, or even previously unknown types of astronomical objects and phenomena, e.g. as outliers in some parameter space of measured properties, both in the catalog and image domains. Examples from current surveys include high-redshift quasars, type-2 quasars, brown dwarfs, and a small number of objects with puzzling spectra. Opening of the time domain will be especially interesting in this regard. Data-mining tools such as unsupervised clustering techniques will be essential in this task, and should become an important part of the VO toolkit.

  4. Long Duration Testing of Type C Thermocouples at 1500 °C

    SciTech Connect (OSTI)

    Joy L. Rempe; Darrell L. Knudson; J. E. Daw; S. C. Wilkins

    2008-04-01T23:59:59.000Z

    Experience with Type C thermocouples operating for long periods in the 1400 to 1600 °C temperature range indicate that significant decalibration occurs, often leading to expensive downtime and material waste. As part of an effort to understand the mechanisms causing drift in these thermocouples, the Idaho National Laboratory conducted a long duration test at 1500 °C containing eight Type C thermocouples. As report in this document, results from this long duration test were adversely affected due to oxygen ingress. Nevertheless, results provide key insights about the impact of precipitate formation on thermoelectric response. Post-test examinations indicate that thermocouple signal was not adversely impacted by the precipitates detected after 1,000 hours of heating at 1,500 °C and suggest that the signal would not have been adversely impacted by these precipitates for longer durations (if oxygen ingress had not occurred in this test).

  5. BIO 432 Practice for Quiz 1, 2 Part a. A forager searches an environment where two prey types are ran-

    E-Print Network [OSTI]

    Caraco, Thomas

    , since 6 > 4. Therefore, rare B can invade common A. Pure A is not an ESS. Better response to pure B is A, since 4 > 3. Therefore, rare A can invade common B. Pure B is not an ESS. 2 Ã? 2 payoff matrix must have an ESS; larger matrix may lack an ESS. Here, ESS must be mixed. Let p represent the frequency

  6. General purpose lead-acid batteries (valve-regulated types) part 1: general requirements, functional characteristics – methods of test

    E-Print Network [OSTI]

    International Electrotechnical Commission. Geneva

    2002-01-01T23:59:59.000Z

    Spécifie les prescriptions générales et les caractéristiques essentielles ainsi que les méthodes d'essais correspondantes.

  7. Multiple-part-type systems in high volume manufacturing : long-term capacity planning & time-based production control

    E-Print Network [OSTI]

    Hua, Xia, M. Eng. Massachusetts Institute of Technology

    2008-01-01T23:59:59.000Z

    This project examines a production station that faces fluctuating demand with seasonal pattern. The cumulative capacity exceeds the cumulative demand in a one year period; however, its weekly capacity is not able to meet ...

  8. hal00270574, Testing Data Types Implementations from

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    is data type abstraction, testing a concrete implementation raises the issue of the gap betweenhal­00270574, version 1 ­ 6 Apr 2008 Testing Data Types Implementations from Algebraic Speci#12.legall@ibisc.univ-evry.fr Abstract. Algebraic speci#12;cations of data types provide a natural basis for testing data types

  9. XML Document XML Document Types and Validation

    E-Print Network [OSTI]

    Weber, Gregory D.

    XML Document Types and Validation IIM-I340 Objectives XML Document Types and Validation IIM-I340 April, 2010 #12;XML Document Types and Validation IIM-I340 Objectives Learning Objectives Understand: The need for validation Two ways to specify validity: Document Type Definitions (DTDs) XML Schemas #12;XML

  10. Aging behavior of polymeric solar absorber materials - Part 2: Commodity plastics

    SciTech Connect (OSTI)

    Kahlen, S. [Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, Leoben 8700 (Austria); Wallner, G.M.; Lang, R.W. [Institute for Polymeric Materials and Testing, University of Linz, Altenbergerstrasse 69, Linz 4040 (Austria)

    2010-09-15T23:59:59.000Z

    In this series of two papers, various polymeric materials are investigated as to their potential applicability as absorber materials for solar thermal collectors. While Part 1 of this paper series deals with the aging behavior of engineering plastics, including two amorphous polymers (PPE + PS) and (PC) and two semi-crystalline polymers (two types of PA12), the present Part 2 treats the aging behavior of semi-crystalline so-called ''commodity'' plastics (two types of crosslinked polyethylene (PE-X) and two types of polypropylene (PP)). As in Part 1, the focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 C in water up to 16,000 h) and stagnation conditions (140 C in air up to 500 h) typical for northern climate. The materials supplied or produced as polymer films were first characterized in the unaged state and then for different states of aging by differential scanning calorimetry (DSC), by size exclusion chromatography (SEC) and by mechanical tensile tests. DSC was applied primarily to obtain information on physical aging phenomena, whereas SEC analysis was used to characterize chemical degradation of the materials. In addition, physical and chemical aging were both analyzed via the small and large strain mechanical behavior. Comparing the two aging conditions in hot air and hot water, a rather stable mechanical performance profile was found for both PP types over the investigated aging time, which was interpreted in terms of competing physical and chemical aging mechanisms. Analogously such competing mechanisms were also inferred for one of the PE-X materials, while the other exhibited substantial degradation in terms of strain-to-break values for both aging conditions. In principle, both PP and PE-X are promising candidates for black absorber applications in northern climates if proper measures against overheating are taken and when adequately modified. (author)

  11. RCRA Hazardous Waste Part A Permit Application: Instructions...

    Open Energy Info (EERE)

    Part A Permit Application: Instructions and Form (EPA Form 8700-23) Jump to: navigation, search OpenEI Reference LibraryAdd to library Form: RCRA Hazardous Waste Part A Permit...

  12. "Ask Argonne" - Dave Grabaskas, Nuclear Engineer, Part 2

    ScienceCinema (OSTI)

    Grabaskas, Dave

    2014-11-24T23:59:59.000Z

    Part 1 (http://www.youtube.com/watch?v=Vs_0wXoSL8M) of Dr. Dave Grabaskas' "Ask Argonne" video set drew many questions from the public. In Part 2, Grabaskas answers three of those questions.

  13. atmosphere part ii: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    16 at 4:00 p.m. (Climate Change and comprehensive) Exams I and II are planned as two Dibble, Theodore 13 PART I: SCIENTIFIC REPORT PART II: ADMINISTRATIVE & FINANCIAL Computer...

  14. "Ask Argonne" - Dave Grabaskas, Nuclear Engineer, Part 2

    SciTech Connect (OSTI)

    Grabaskas, Dave

    2013-09-13T23:59:59.000Z

    Part 1 (http://www.youtube.com/watch?v=Vs_0wXoSL8M) of Dr. Dave Grabaskas' "Ask Argonne" video set drew many questions from the public. In Part 2, Grabaskas answers three of those questions.

  15. A systematic approach to internal spare parts management

    E-Print Network [OSTI]

    Meggs, Paul W. (Paul William)

    2014-01-01T23:59:59.000Z

    Internal spare parts management is a universal issue faced by all manufacturers, and involves decision-making and planning across a highly complex and heterogeneous group of thousands of items. Spare parts exhibit intermittent ...

  16. aeronautical applications part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    352 Application Of The Mold Sdm Process To The Fabrication Of Ceramic Parts For A Micro Gas Turbine Engine CiteSeer Summary: ... engine with silicon nitcon part is being developed....

  17. Reactive binders for metal parts produced by Three Dimensional Printing

    E-Print Network [OSTI]

    Yoo, Helen Jean

    1997-01-01T23:59:59.000Z

    Three Dimensional Printing (3DP) is a solid free form fabrication process which enables the construction of parts directly from computer-aided design (CAD) models. In the current process, metal parts are produced by printing ...

  18. Wheel-type magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, John A. (Los Alamos, NM)

    1983-01-01T23:59:59.000Z

    The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load.

  19. Wheel-type magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, J.A.

    1982-01-20T23:59:59.000Z

    The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load.

  20. Wheel-type magnetic refrigerator

    DOE Patents [OSTI]

    Barclay, J.A.

    1983-10-11T23:59:59.000Z

    The disclosure is directed to a wheel-type magnetic refrigerator capable of cooling over a large temperature range. Ferromagnetic or paramagnetic porous materials are layered circumferentially according to their Curie temperature. The innermost layer has the lowest Curie temperature and the outermost layer has the highest Curie temperature. The wheel is rotated through a magnetic field perpendicular to the axis of the wheel and parallel to its direction of rotation. A fluid is pumped through portions of the layers using inner and outer manifolds to achieve refrigeration of a thermal load. 7 figs.

  1. Supplement 20, Part 7, Parasite-Subject Catalogue: Hosts

    E-Print Network [OSTI]

    Shaw, Judith H.; Edwards, Shirley J.; Rayburn, Jane D.; Tolson, Deborah A.; Hood, Martha W.

    1976-01-01T23:59:59.000Z

    . In other words, when using the Parasite-Subject Catalogues, it wTill be necessary to consult the Author Catalogue for complete bibliographical information. The following are the parts of each supplement : Part 1, Authors: A-Z Part 2, Parasite... SUPPLEMENT 20, PART 7 PARASITE-SUBJECT CATALOGUE : HOSTS By DEBORAH A. TOLSON, Biological Laboratory Technician MARTHA W. HOOD, Zoologist JUDITH H. SHAW, Zoologist JANE D. RAYBURN, Technical Information Specialist SHIRLEY J. EDWARDS, Supervisory...

  2. Anisotropic thermo-elasticity in 2D -- Part II: Applications

    E-Print Network [OSTI]

    Jens Wirth

    2007-11-15T23:59:59.000Z

    In this note we present concrete applications of the general treatment of anisotropic thermo-elasticity developed in Part I.

  3. Part B. Project summary proposal title goes here

    E-Print Network [OSTI]

    Miller, Ezra N.

    . The numbering ("lettering") of the Parts of the proposal are as in * *the Grant Proposal Guide (GPG

  4. Decontamination Process of Internal Part Pipes - 13442

    SciTech Connect (OSTI)

    Ladet, X.; Sozet, O.; Cabanillas, P.; Macia, G. [STMI, Site de MARCOULE - Batiment 423 - 30204 Bagnols-sur-Ceze (France)] [STMI, Site de MARCOULE - Batiment 423 - 30204 Bagnols-sur-Ceze (France); Moggia, F.; Damerval, F. [STMI, 1 route de la Noue 91196 - Gif-sur-Yvette (France)] [STMI, 1 route de la Noue 91196 - Gif-sur-Yvette (France)

    2013-07-01T23:59:59.000Z

    The Marcoule Site, created in 1955 is one of the first nuclear sites in France. It combines the activities of the Research Centre of the French Atomic Energy Commission (CEA) and AREVA industrial operations. Today, a large part of the operations on this site consists of the cleaning and the dismantling of nuclear Installations, once the end of their life cycle has been reached. An example can be the reprocessing plant UP1. This unit, started in 1958 has been stopped in 1997 and its dismantling started quickly thereafter. Technical challenges of the UP1 dismantling are mainly linked to a very high risk of exposure due to a large variety of contaminated equipments and residuals of fission products, potential sources of irradiation. The dismantling of Hall 71 is a typical example of such challenge. This paper will present a solution developed by AREVA Clean-Up business unit, in collaboration with COFIM Industry, to remove contamination incrusted inside the pipes before starting the cutting operations, thus reducing irradiation risk. (authors)

  5. The practical revised simplex method (Part 2) Julian Hall

    E-Print Network [OSTI]

    Hall, Julian

    The practical revised simplex method (Part 2) Julian Hall School of Mathematics University of Edinburgh January 25th 2007 The practical revised simplex method #12;Overview (Part 2) · Practical implementation of the revised simplex method Representation of B-1 #12;Overview (Part 2) · Practical

  6. The Standard Parts Problem and the Complexity of Control Communication

    E-Print Network [OSTI]

    Baillieul, John

    1 The Standard Parts Problem and the Complexity of Control Communication J. Baillieul & W.S. Wong Abstract The objective of the standard parts optimal control problem is to find a number, m, of control on control communication complexity. In what follows a general formulation of the standard parts optimization

  7. HANDLING FRESH FISH REFRIGERATION OF FISH -PART 2

    E-Print Network [OSTI]

    HANDLING FRESH FISH REFRIGERATION OF FISH - PART 2 UNITED STATES DEPARTMENT OF THE INTERIOR FISH 428 Washington 25, D, C. December 1956 REFRIGERATION OF FISH - PART TWO HANDLING FRESH FISH By Charles in a series of five on "Refrigeration of Fish." Titles of the other four leaflets are: - 38 - 84 Part 1

  8. Human genome program report. Part 1, overview and progress

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report contains Part 1 of a two-part report to reflect research and progress in the U.S. Department of Energy Human Genome Program from 1994 through 1996, with specified updates made just before publication. Part 1 consists of the program overview and report on progress.

  9. Human genome program report. Part 2, 1996 research abstracts

    SciTech Connect (OSTI)

    NONE

    1997-11-01T23:59:59.000Z

    This report contains Part 2 of a two-part report to reflect research and progress in the US Department of Energy Human Genome Program from 1994 through 1996, with specified updates made just before publication. Part 2 consists of 1996 research abstracts. Attention is focused on the following: sequencing; mapping; informatics; ethical, legal, and social issues; infrastructure; and small business innovation research.

  10. Fast Reactor Fuel Type and Reactor Safety Performance

    SciTech Connect (OSTI)

    R. Wigeland; J. Cahalan

    2009-09-01T23:59:59.000Z

    Fast Reactor Fuel Type and Reactor Safety Performance R. Wigeland , Idaho National Laboratory J. Cahalan, Argonne National Laboratory The sodium-cooled fast neutron reactor is currently being evaluated for the efficient transmutation of the highly-hazardous, long-lived, transuranic elements that are present in spent nuclear fuel. One of the fundamental choices that will be made is the selection of the fuel type for the fast reactor, whether oxide, metal, carbide, nitride, etc. It is likely that a decision on the fuel type will need to be made before many of the related technologies and facilities can be selected, from fuel fabrication to spent fuel reprocessing. A decision on fuel type should consider all impacts on the fast reactor system, including safety. Past work has demonstrated that the choice of fuel type may have a significant impact on the severity of consequences arising from accidents, especially for severe accidents of low probability. In this paper, the response of sodium-cooled fast reactors is discussed for both oxide and metal fuel types, highlighting the similarities and differences in reactor response and accident consequences. Any fast reactor facility must be designed to be able to successfully prevent, mitigate, or accommodate all consequences of potential events, including accidents. This is typically accomplished by using multiple barriers to the release of radiation, including the cladding on the fuel, the intact primary cooling system, and most visibly the reactor containment building. More recently, this has also included the use of ‘inherent safety’ concepts to reduce or eliminate the potential for serious damage in some cases. Past experience with oxide and metal fuel has demonstrated that both fuel types are suitable for use as fuel in a sodium-cooled fast reactor. However, safety analyses for these two fuel types have also shown that there can be substantial differences in accident consequences due to the neutronic and thermophysical properties of the fuel and their compatibility with the reactor coolant, with corresponding differences in the challenges presented to the reactor developers. Accident phenomena are discussed for the sodium-cooled fast reactor based on the mechanistic progression of conditions from accident initiation to accident termination, whether a benign state is achieved or more severe consequences are expected. General principles connecting accident phenomena and fuel properties are developed from the oxide and metal fuel safety analyses, providing guidelines that can be used as part of the evaluation for selection of fuel type for the sodium-cooled fast reactor.

  11. Constructions of Optical Queues With a Limited Number of Recirculations--Part II: Optimal Constructions

    E-Print Network [OSTI]

    Huang, Xuan-Chao

    2010-01-01T23:59:59.000Z

    One of the main problems in all-optical packet-switched networks is the lack of optical buffers, and one feasible technology for the constructions of optical buffers is to use optical crossbar Switches and fiber Delay Lines (SDL). In this two-part paper, we consider SDL constructions of optical queues with a limited number of recirculations through the optical switches and the fiber delay lines. Such a problem arises from practical feasibility considerations. In Part I, we have proposed a class of greedy constructions for certain types of optical queues, including linear compressors, linear decompressors, and 2-to-1 FIFO multiplexers, and have shown that every optimal construction among our previous constructions of these types of optical queues under the constraint of a limited number of recirculations must be a greedy construction. In Part II, the present paper, we further show that there are at most two optimal constructions and give a simple algorithm to obtain the optimal construction(s). The main idea i...

  12. Type Reconstruction in the Presence of Polymorphic Recursion and Recursive Types

    E-Print Network [OSTI]

    allowed in the inequalitiesof an instance, Partly supported by NSF grant CCR-9113196. Address: Department

  13. Submitter Email: nathalie.revol@ens-lyon.fr Type of Project: New IEEE Standard

    E-Print Network [OSTI]

    Kreinovich, Vladik

    with a similar scope? No 7.2 International Activities a. Adoption Is there potential for this standard (in part or in whole) to be adopted by another national, regional or international organization? Yes Organization: ISOP1788 Submitter Email: nathalie.revol@ens-lyon.fr Type of Project: New IEEE Standard PAR Request

  14. Control of power to an inductively heated part

    DOE Patents [OSTI]

    Adkins, Douglas R. (1620 Adelita Dr. NE., Albuquerque, NM 87112); Frost, Charles A. (1039 Red Oaks Loop NE., Albuquerque, NM 87122); Kahle, Philip M. (528 Longwood Loop NE., Rio Rancho, NM 87124); Kelley, J. Bruce (13200 Blue Corn Maiden Trail NE., Albuquerque, NM 87112); Stanton, Suzanne L. (2805 Palo Alto NE., Albuquerque, NM 87112)

    1997-01-01T23:59:59.000Z

    A process for induction hardening a part to a desired depth with an AC signal applied to the part from a closely coupled induction coil includes measuring the voltage of the AC signal at the coil and the current passing through the coil; and controlling the depth of hardening of the part from the measured voltage and current. The control system determines parameters of the part that are functions of applied voltage and current to the induction coil, and uses a neural network to control the application of the AC signal based on the detected functions for each part.

  15. Control of power to an inductively heated part

    DOE Patents [OSTI]

    Adkins, D.R.; Frost, C.A.; Kahle, P.M.; Kelley, J.B.; Stanton, S.L.

    1997-05-20T23:59:59.000Z

    A process for induction hardening a part to a desired depth with an AC signal applied to the part from a closely coupled induction coil includes measuring the voltage of the AC signal at the coil and the current passing through the coil; and controlling the depth of hardening of the part from the measured voltage and current. The control system determines parameters of the part that are functions of applied voltage and current to the induction coil, and uses a neural network to control the application of the AC signal based on the detected functions for each part. 6 figs.

  16. Hydrogen in Type Ic Supernovae?

    E-Print Network [OSTI]

    David Branch; David J. Jeffery; Timothy R. Young; E. Baron

    2006-05-09T23:59:59.000Z

    By definition, a Type Ic supernova (SN Ic) does not have conspicuous lines of hydrogen or helium in its optical spectrum. SNe Ic usually are modelled in terms of the gravitational collapse of bare carbon-oxygen cores. We consider the possibility that the spectra of ordinary (SN 1994I-like) SNe Ic have been misinterpreted, and that SNe Ic eject hydrogen. An absorption feature usually attributed to a blend of Si II 6355 and C II 6580 may be produced by H-alpha. If SN 1994I-like SNe Ic eject hydrogen, the possibility that hypernova (SN 1998bw-like) SNe Ic, some of which are associated with gamma-ray bursts, also eject hydrogen should be considered. The implications of hydrogen for SN Ic progenitors and explosion models are briefly discussed.

  17. Proof and Definition in Logic and Type Theory Proof and Definition in Logic and Type Theory

    E-Print Network [OSTI]

    Adams, Robin

    Proof and Definition in Logic and Type Theory Proof and Definition in Logic and Type Theory Robin questions. #12;Proof and Definition in Logic and Type Theory Definition and Proof Definition and proof -- but they are not in predicate logic or type theory. #12;Proof and Definition in Logic and Type Theory Methods of Definition

  18. Archive Reference Buildings by Building Type: Supermarket

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  19. Archive Reference Buildings by Building Type: Warehouse

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the reference buildings for new construction commercial buildings, organized by building type and location. A summary of building types and climate zones is...

  20. New approaches for modeling type Ia supernovae

    E-Print Network [OSTI]

    Zingale, Michael; Almgren, Ann S.; Bell, John B.; Day, Marcus S.; Rendleman, Charles A.; Woosley, Stan

    2007-01-01T23:59:59.000Z

    ich and J. Stein. On the thermonuclear runaway in Type IaSmall-Scale Stability of Thermonuclear Flames o in Type IaS. E. Woosley. The thermonuclear explosion of chandrasekhar

  1. Double field theory of type II strings

    E-Print Network [OSTI]

    Hohm, Olaf

    We use double field theory to give a unified description of the low energy limits of type IIA and type IIB superstrings. The Ramond-Ramond potentials fit into spinor representations of the duality group O(D, D) and ...

  2. Ideal bandpasses for type Ia supernova cosmology

    E-Print Network [OSTI]

    Davis, Tamara M.; Schmidt, Brian P.; Kim, Alex G.

    2005-01-01T23:59:59.000Z

    diversity of type Ia Supernovae, in preparation. Kim, A.error in measurements of supernovae depends on a periodicABSTRACT To use type Ia supernovae as standard candles for

  3. Overload permit rules applicable to H-type and HS-type bridges

    E-Print Network [OSTI]

    Litchfield, Stephen Charles

    1994-01-01T23:59:59.000Z

    This document defines standards for issuing permits for overweight vehicles crossing standard H-type and HS-type Texas highway bridges. A general formula and a bridge specific formula have been developed for simple spans of both bridge types...

  4. Rates and progenitors of type Ia supernovae

    E-Print Network [OSTI]

    Wood-Vasey, William Michael

    2004-01-01T23:59:59.000Z

    Supernovae . . . . . . . . . . . . . . . . . . . .Supernovae Found 5.1 Introduction . . . . . . . . . . . .1.2 Non-Type Ia Supernovae . . . . . . . . . . . . . . . 1.3

  5. Part B - Requirements & Funding Information PART B - Requirements and Funding Information

    Energy Savers [EERE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directed offOCHCO2:Introduction toManagementOPAM5Parabolic Trough Parabolic Trough DOE funds2, Clausesa. Part

  6. Fuzzy Typing for Document Management Alison HUETTNER

    E-Print Network [OSTI]

    Wu, Dekai

    Fuzzy Typing for Document Management Alison HUETTNER Clairvoyance Corporation 5301 Fifth Avenue method of document analysis and management, based on a combination of techniques from NLP and fuzzy logic typing for document management. The fuzzy typing approach is general in scope and can be applied to many

  7. On the reachable cycles via the unified perspective of cryocoolers. Part B: Cryocoolers with isentropic expanders

    SciTech Connect (OSTI)

    Maytal, Ben-Zion [Rafael, Ltd., P.O. Box 2250, Haifa 3102102 (Israel); Pfotenhauer, John M. [University of Wisconsin-Madison, Madison, WI 53706 (United States)

    2014-01-29T23:59:59.000Z

    Solvay, Stirling and Gifford-McMahon types of cryocoolers employ an isentropic expander which is their elementary mechanism for temperature reduction (following the unified model of cryocoolers as described in a previous paper, Part A). Solvay and Stirling cryocoolers are driven by a larger temperature reduction than that of the Gifford-McMahon cycle, for a similar compression ratio. These cryocoolers are compared from the view of the unified model, in terms of the lowest attainable temperature, compression ratio, the size of the interchanger and the applied heat load.

  8. Nucleosynthesis in Type Ia Supernovae

    E-Print Network [OSTI]

    K. Nomoto; K. Iwamoto; N. Nakasato; F. -K. Thielemann; F. Brachwitz; T. Tsujimoto; Y. Kubo; N. Kishimoto

    1997-06-03T23:59:59.000Z

    Among the major uncertainties involved in the Chandrasekhar mass models for Type Ia supernovae are the companion star of the accreting white dwarf (or the accretion rate that determines the carbon ignition density) and the flame speed after ignition. We present nucleosynthesis results from relatively slow deflagration (1.5 - 3 % of the sound speed) to constrain the rate of accretion from the companion star. Because of electron capture, a significant amount of neutron-rich species such as ^{54}Cr, ^{50}Ti, ^{58}Fe, ^{62}Ni, etc. are synthesized in the central region. To avoid the too large ratios of ^{54}Cr/^{56}Fe and ^{50}Ti/^{56}Fe, the central density of the white dwarf at thermonuclear runaway must be as low as \\ltsim 2 \\e9 \\gmc. Such a low central density can be realized by the accretion as fast as $\\dot M \\gtsim 1 \\times 10^{-7} M_\\odot yr^{-1}$. These rapidly accreting white dwarfs might correspond to the super-soft X-ray sources.

  9. Type Ia Supernova Carbon Footprints

    E-Print Network [OSTI]

    Thomas, R C; Aragon, C; Antilogus, P; Bailey, S; Baltay, C; Bongard, S; Buton, C; Canto, A; Childress, M; Chotard, N; Copin, Y; Fakhouri, H K; Gangler, E; Hsiao, E Y; Kerschhaggl, M; Kowalski, M; Loken, S; Nugent, P; Paech, K; Pain, R; Pecontal, E; Pereira, R; Perlmutter, S; Rabinowitz, D; Rigault, M; Rubin, D; Runge, K; Scalzo, R; Smadja, G; Tao, C; Weaver, B A; Wu, C; Brown, P J; Milne, P A

    2011-01-01T23:59:59.000Z

    We present convincing evidence of unburned carbon at photospheric velocities in new observations of 5 Type Ia supernovae (SNe Ia) obtained by the Nearby Supernova Factory. These SNe are identified by examining 346 spectra from 124 SNe obtained before +2.5 d relative to maximum. Detections are based on the presence of relatively strong C II 6580 absorption "notches" in multiple spectra of each SN, aided by automated fitting with the SYNAPPS code. Four of the 5 SNe in question are otherwise spectroscopically unremarkable, with ions and ejection velocities typical of SNe Ia, but spectra of the fifth exhibits high-velocity (v > 20,000 km/s) Si II and Ca II features. On the other hand, the light curve properties are preferentially grouped, strongly suggesting a connection between carbon-positivity and broad band light curve/color behavior: Three of the 5 have relatively narrow light curves but also blue colors, and a fourth may be a dust-reddened member of this family. Accounting for signal-to-noise and phase, we ...

  10. Training manual for precision hand deburring, Part 1

    SciTech Connect (OSTI)

    Gillespie, L.K.

    1980-05-01T23:59:59.000Z

    Part 1 is presented of 4 parts of a training manual to be used by machinist trainees, production workers, and others removing burrs from precision miniature parts. The manuals are written to be self-teaching and are intended to be used with two hours of training each day and are intended to be used with two hours of training each day along with another six hours of bench work in deburring.

  11. astatine radiopharmaceuticals part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a fence design exists to orient any convex polygonal part. Jeff Wiegley; Ken Goldberg; Mike Peshkin; Mike Brokowski 1996-01-01 380 FHS Mathematics and Statistics Examination...

  12. atopic dermatitis part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a fence design exists to orient any convex polygonal part. Jeff Wiegley; Ken Goldberg; Mike Peshkin; Mike Brokowski 1996-01-01 412 FHS Mathematics and Statistics Examination...

  13. American Gas Association Memorandum Summarizing Ex Parte Communication...

    Broader source: Energy.gov (indexed) [DOE]

    at WGLs Training Facility in Springfield, VA. AGA Memorandum Summarizing Ex Parte Communication Condensing Heating and Water Heating Equipment Workshop Agenda October 9th...

  14. Ex parte communication of the California Energy Commission- Docket...

    Broader source: Energy.gov (indexed) [DOE]

    standards for battery chargers and Class A external power supplies. Ex parte communication of the California Energy Commission- Docket No. EERE-2008-BT-STD-0005 More...

  15. Ex Parte Communication Following Meeting Between DOE and the...

    Broader source: Energy.gov (indexed) [DOE]

    & Publications 2014-05-08 Issuance: Test Procedures for Battery Chargers; Notice of Data Availability Ex parte communication Memorandum Memorandum to DOE re Battery Chargers...

  16. Environmental Assessment for Proposed Rule 10 CFR Parts 433 and...

    Broader source: Energy.gov (indexed) [DOE]

    environmental assessment for Proposed Rule 10 CFR Part 433, Sustainable Design and Energy Efficiency Standards for New Federal Commercial and High-Rise Multi-Family Residential...

  17. aging management part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    IN INSULAR RESOURCE DEVELOPMENT AND MANAGEMENT Biology and Medicine Websites Summary: of Technology Assessment of the U. S. Congress as part of a broader study of renewable...

  18. aligning threaded parts: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    architecture. DBS was implemented on the Nano-Threads Programming Model (NPM) as part of NANOS, a large-scale project involving the development of a runtime...

  19. aim concept part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    aircraft propulsion, gas turbine engines, fault detection and isolation, statistical pattern recognition 1 Ray, Asok 10 Canopy spectral invariants. Part 1: A new concept in...

  20. Timken Producing Parts for Wind Turbines | Department of Energy

    Energy Savers [EERE]

    at businesses around the state. | File photo Concrete Company Aims Higher for More Wind Energy Boston's Wind Technology Testing Center, funded in part with Recovery Act...

  1. Bill Wilcox, part 3 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3 Bill Wilcox, part 3 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  2. John Rice Irwin, part 1 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 John Rice Irwin, part 1 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake...

  3. Gordon Fee, part 1 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Gordon Fee, part 1 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  4. Bill Wilcox, part 2 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Bill Wilcox, part 2 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  5. Gordon Fee, part 2 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 Gordon Fee, part 2 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  6. Bill Wilcox, part 1 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    1 Bill Wilcox, part 1 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake Case...

  7. John Rice Irwin, part 2 | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    2 John Rice Irwin, part 2 Oral History Videos Speakers INTRODUCTION Ed Bailey Jim Bailey Kay Bailey Ken Bernander Willard Brock Wilma Brooks Elmer Brummitt Naomi Brummitt Blake...

  8. Groundwater in the Southwestern Part of the Jemez Mountains Volcanic...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Groundwater in the Southwestern Part of the Jemez Mountains Volcanic Region, New Mexico...

  9. al acceso parte: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hills landfill (Byrne et al. 1992; Gilbert et al. 1998143 1 INTRODUCTION Geosynthetic clay liners (GCLs) with geomembranes (GMs) placed on slopes as part of composite liner...

  10. PART I: JOB DESCRIPTION Weighted Job Questionnaire (WJQ) Custom

    E-Print Network [OSTI]

    PART I: JOB DESCRIPTION Weighted Job Questionnaire (WJQ) Custom Department Name: Position Number WEIGHTED JOB QUESTIONNAIRE (WJQ) CUSTOM PARTI: JOB DESCRIPTION 1. POSITION IDENTIFICATION Department

  11. A brief history of the Biology Complex, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    various streams and wastes. One new facility was a very large furnace used for burning depleted uranium parts and recovering the values as uranium oxide. Another large facility...

  12. acid solutions part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    m Popovych, Roman 71 Z .Comparative Biochemistry and Physiology Part B 128 2001 445 450 Purification and characterization of the fatty acid Chemistry Websites Summary: fatty acid...

  13. Geothermal investigations in Idaho. Part 1. Geochemistry and...

    Open Energy Info (EERE)

    in Idaho. Part 1. Geochemistry and geologic setting of selected thermal waters Jump to: navigation, search OpenEI Reference LibraryAdd to library Report: Geothermal investigations...

  14. n-Linear Algebra of type II

    E-Print Network [OSTI]

    W. B. Vasantha Kandasamy; Florentin Smarandache

    2009-02-01T23:59:59.000Z

    This book is a continuation of the book n-linear algebra of type I and its applications. Most of the properties that could not be derived or defined for n-linear algebra of type I is made possible in this new structure: n-linear algebra of type II which is introduced in this book. In case of n-linear algebra of type II we are in a position to define linear functionals which is one of the marked difference between the n-vector spaces of type I and II. However all the applications mentioned in n-linear algebras of type I can be appropriately extended to n-linear algebras of type II. Another use of n-linear algebra (n-vector spaces) of type II is that when this structure is used in coding theory we can have different types of codes built over different finite fields whereas this is not possible in the case of n-vector spaces of type I. Finally in the case of n-vector spaces of type II, we can obtain n-eigen values from distinct fields; hence, the n-characteristic polynomials formed in them are in distinct different fields. An attractive feature of this book is that the authors have suggested 120 problems for the reader to pursue in order to understand this new notion. This book has three chapters. In the first chapter the notion of n-vector spaces of type II are introduced. This chapter gives over 50 theorems. Chapter two introduces the notion of n-inner product vector spaces of type II, n-bilinear forms and n-linear functionals. The final chapter suggests over a hundred problems. It is important that the reader is well-versed not only with linear algebra but also n-linear algebra of type I.

  15. RCRA/UST, superfund, and EPCRA hotline training module. Introduction to: Miscellaneous and other units (40 CFR part 264, subpart X and 40 CFR 265, subparts P, Q, and R) updated as of July 1995

    SciTech Connect (OSTI)

    NONE

    1995-11-01T23:59:59.000Z

    The module describes the basic requirements and types of units of 40 CFR 264, Subpart X and standards for broadly defined treatment processes - Thermal Treatment (Part 265, Subpart P); Chemical, Physical, and Biological Treatment (Subpart Q); and Underground Injection (Subpart R). It explains when corrective action applies to these subparts and presents the relationship between Part 264, Subpart X, and Part 265, Subparts P, Q, and R.

  16. Practical approach to solvability: Geophysical application using complex decomposition into simple part (solvable) and complex part (interpretable) for seismic imaging

    E-Print Network [OSTI]

    Lau, August

    2010-01-01T23:59:59.000Z

    The classical approach to solvability of a mathematical problem is to define a method which includes certain rules of operation or algorithms. Then using the defined method, one can show that some problems are solvable or not solvable or undecidable depending on the particular method. With numerical solutions implemented in a computer, it might be more practical to define solvability of a mathematical problem as a complex decomposition problem. The decomposition breaks the data into a simple part and a complex part. The simple part is the solvable part by the method prescribed in the problem definition. The complex part is the leftover of the simple part. Complex part can be viewed as the "residual" of data or operator. It should be interpreted and not to be discarded as useless. We will give different examples to illustrate the more practical definition of solvability. The complex part is not noise and should not be viewed as useless part of the data. It has its own merit in terms of topological or geologica...

  17. STORAGE OPERATORS and -POSITIVE TYPES in TTR TYPE Karim NOUR 1

    E-Print Network [OSTI]

    Nour, Karim

    STORAGE OPERATORS and -POSITIVE TYPES in TTR TYPE SYSTEM Karim NOUR 1 LAMA - Equipe de Logique the notion of storage operator to simulate "call by value" in the "call by name" strategy. J.L. Krivine has for the storage operators in AF2 type system. This paper studies the -positive types (the universal second order

  18. Conceptual design report: Nuclear materials storage facility renovation. Part 1, Design concept. Part 2, Project management

    SciTech Connect (OSTI)

    NONE

    1995-07-14T23:59:59.000Z

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This document provides Part I - Design Concept which describes the selected solution, and Part II - Project Management which describes the management system organization, the elements that make up the system, and the control and reporting system.

  19. FRIGERATION OF FISH -PART 3 FACTORS TO BE CONSIDERED

    E-Print Network [OSTI]

    FRIGERATION OF FISH - PART 3 FACTORS TO BE CONSIDERED IN THE FREEZING AND COLD STORAGE. REFRIGERATION OF FISH - PART THREE FACTORS TO BE CONSIDERED IN THE FREEZING AND COLD STORAGE OF FISHERY PRODUCTS Taking Place During Cold Storage of Fish Section 3 - Protective Coverings for Frozen Fish · · Pages 1

  20. Measuring Residential Ventilation System Airflows: Part 2 -Field

    E-Print Network [OSTI]

    1 Measuring Residential Ventilation System Airflows: Part 2 - Field Evaluation of Airflow Meter Residential Ventilation System Airflows: Part 2 - Field Evaluation of Airflow Meter Devices and System Flow, mechanical ventilation, measurement, ASHRAE 62.2, flow hood ABSTRACT The 2008 California State Energy Code

  1. Modular Algorithms for Transient Semiconductor Device Simulation, Part I

    E-Print Network [OSTI]

    Jerome, Joseph W.

    Modular Algorithms for Transient Semiconductor Device Simulation, Part I: Analysis of the Outer, is introduced at dis- crete time steps for the one-dimensional semiconductor device model. The it- eration as approximate Newton iterations. Continuation is employed as the time-stepping bridge. 1 Introduction In Part I

  2. Transforming the advanced lab: Part I -Learning goals Benjamin Zwickl

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    Transforming the advanced lab: Part I - Learning goals Benjamin Zwickl , Noah Finkelstein and H. J-division undergraduate level. As part of transforming our senior-level Optics and Modern Physics Lab at the University, 01.40.Fk, 01.50.Qb INTRODUCTION At the University of Colorado Boulder (CU), we are transforming our

  3. STUDY AND DEVELOPMENT OF MECHANICAL 3D STANDARD PARTS LIBRARY

    E-Print Network [OSTI]

    Wu Yang-dong; Xie Qing-sheng; Qi Guo-ning; Lu Yu-jun

    technology included variant design, tabular layouts of article characteristics and parametric cad system, the method and key technology to construct parametric mechanical 3D standard parts library was introduced. Engineer could build mechanical standard part through this system automatically and improve the

  4. "Ask Argonne" - Charlie Catlett, Computer Scientist, Part 2

    ScienceCinema (OSTI)

    Catlett, Charlie

    2014-07-15T23:59:59.000Z

    A few weeks back, computer scientist Charlie Catlett talked a bit about the work he does and invited questions from the public during Part 1 of his "Ask Argonne" video set (http://bit.ly/1joBtzk). In Part 2, he answers some of the questions that were submitted. Enjoy!

  5. Table of Contents Part 1: Climate Graphs Activity

    E-Print Network [OSTI]

    . Quantity. How much precipitation falls? What is the general trend east to west in Texas concerningTable of Contents Part 1: Climate Graphs Activity Part 2: Texas Climate Handout Maps for transparencies: a. Texas Average Annual Temperature b. Texas Average Annual Precipitation c. Texas Climate

  6. Complete Algorithms for Feeding Polyhedral Parts using Pivot Grasps

    E-Print Network [OSTI]

    Utrecht, Universiteit

    into a desired orientation. A robot arm with 4 degrees of freedom (DoF) is capable of moving parts through 6 Do. After the part is grasped in a known configuration by a robot arm, inverse kinematics can be usedF robot arm by slicing C­space but did not provide a complete algorithm [29]. Automating the grasp

  7. REFRIGERATION OF FISH PART 5 DISTRIBUTION AND MARKETING

    E-Print Network [OSTI]

    REFRIGERATION OF FISH· PART 5 DISTRIBUTION AND MARKETING OF FROZEN FISHERY PRODUCTS UNITED STATES in a series of five on "Refrigeration of Fish." Titles of the other four leaflets are: Part 1 (Fishery Leaflet., and edited by Joseph W. Slavin, Refrigeration Engineer, Fishery Technological Laborator,y, East Boston

  8. Lectures on Applied Mathematics Part 1: Linear Algebra

    E-Print Network [OSTI]

    Bowen, Ray M.

    2014-01-22T23:59:59.000Z

    LECTURES ON APPLIED MATHEMATICS Part 1: Linear Algebra Ray M. Bowen Professor Emeritus of Mechanical Engineering President Emeritus Texas A&M University College Station, Texas Copyright Ray... M. Bowen Updated January, 2014 ii ____________________________________________________________________________ PREFACE To Part 1 It is common for Departments of Mathematics to offer a junior-senior level course on Linear Algebra...

  9. VOLUMF -31, PART 1 BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES

    E-Print Network [OSTI]

    Seamons, Kent E.

    Y O U N G VOLUMF -31, PART 1 #12;BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES VOLUME 31.PART 1 CONTENTS .................................................................. Ralph E.Lambert Geology of the Mount Ellen Quadrangle. Henry Mountains. Garfield County. Utah near White Horse Pass. Elko County. Nevada ............Stephen M Smith Geology of the Steele Butte

  10. "Ask Argonne" - Robert Jacob, Climate Scientist, Part 2

    ScienceCinema (OSTI)

    Jacob, Robert

    2014-11-24T23:59:59.000Z

    Previously, climate scientist Robert Jacob talked a bit about the work he does and invited questions from the public during Part 1 of his "Ask Argonne" video set (http://bit.ly/1aK6WDv). In Part 2, he answers some of the questions that were submitted.

  11. COMPARATIVE STATISTICAL ANALYSIS OF TEST PARTS MANUFACTURED IN PRODUCTION

    E-Print Network [OSTI]

    Gilsinn, David E.

    measured using a laser ball bar instrument. Twenty-one copies of the part were produced and measured to actual part error uncertainties. Keywords: coordinate measuring machine, drilling, error uncertainties, laser ball bar, machine tools, machine tool errors, milling, Monte Carlo, propagation of uncertainty

  12. Seamless Energy Management Systems Part I: Assessment of Energy

    E-Print Network [OSTI]

    Seamless Energy Management Systems Part I: Assessment of Energy Management Systems and Key to Engineer the Future Electric Energy System #12;#12;Seamless Energy Management Systems Part I: Assessment of Energy Management Systems and Key Technological Requirements Final Project Report Project Faculty Team

  13. Seamless Energy Management Systems Part II: Development of Prototype

    E-Print Network [OSTI]

    Seamless Energy Management Systems Part II: Development of Prototype Core Elements Final Project System #12;#12;Seamless Energy Management Systems Part II: Development of Prototype Core Elements Final Center (PSERC) research project entitled "Seamless Energy Management Systems" (S-53G for 2013

  14. "Ask Argonne" - Charlie Catlett, Computer Scientist, Part 2

    SciTech Connect (OSTI)

    Catlett, Charlie

    2014-06-17T23:59:59.000Z

    A few weeks back, computer scientist Charlie Catlett talked a bit about the work he does and invited questions from the public during Part 1 of his "Ask Argonne" video set (http://bit.ly/1joBtzk). In Part 2, he answers some of the questions that were submitted. Enjoy!

  15. Curvature invariants in type-III spacetimes

    E-Print Network [OSTI]

    V. Pravda

    1999-08-17T23:59:59.000Z

    The results of paper [1] are generalized for vacuum type-III solutions with, in general, a non-vanishing cosmological constant Lambda. It is shown that all curvature invariants containing derivatives of the Weyl tensor vanish if a type-III spacetime admits a non-expanding and non-twisting null geodesic congruence. A non-vanishing curvature invariant containing first derivatives of the Weyl tensor is found in the case of type-III spacetime with expansion or twist.

  16. Turbulent Combustion in Type Ia Supernova Models

    E-Print Network [OSTI]

    F. K. Roepke; W. Hillebrandt

    2006-09-15T23:59:59.000Z

    We review the astrophysical modeling of type Ia supernova explosions and describe numerical methods to implement numerical simulations of these events. Some results of such simulations are discussed.

  17. Convolution type operators on locally compact groups

    E-Print Network [OSTI]

    Shtein--~erg, Convolution Type Operators on Locally Compact Groups [in Russian],. Manuscript Deposited in the All-Union Institute of Scientific and Technical ...

  18. Type B Accident Investigation, Subcontractor Employee Personal...

    Broader source: Energy.gov (indexed) [DOE]

    February 18, 2003, at the East Tennessee Technology Park, Oak Ridge, Tennessee Type B Accident Investigation, Subcontractor Employee Personal Protective Equipment Ignition Incident...

  19. Using 3D Painting to Build and Repair Parts | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a part or add material to repair an existing part. Cold spray is part of GE's expanded additive manufacturing toolkit. An error occurred. Unable to execute Javascript. nteneh...

  20. Equivalence of Real Elliptic CurvesEquivalence of Real Elliptic Curves Part 2Part 2 --Birational EquivalenceBirational Equivalence

    E-Print Network [OSTI]

    Broughton, S. Allen

    1 Equivalence of Real Elliptic CurvesEquivalence of Real Elliptic Curves Part 2Part 2 -- Birational EquivalenceBirational Equivalence Allen Broughton Rose-Hulman Institute of Technology #12;2 CreditsCredits Discussion with Ken McMurdy #12;3 OutlineOutline -- 11 Recap of linear equivalence Complex elliptic curves

  1. Subcellular characterization of four sorghum lines that differ in endosperm texture and type

    E-Print Network [OSTI]

    Sullins, Richard Don

    1972-01-01T23:59:59.000Z

    SUj3CELLULAR CHARACTERIZATION OF FOUR SORGHUM LINES THAT DIFFER IN ENDOSPERM TEXTURE AND TYPE A lhesis by RIG&LARD DON SULLIES Submitted to the Graduate College of Texas Ak? University in part, ial fulfillment of' the requirement f...' or the degree of' MASTL'R OF SCIENCE A u gus t 1972 Major Sub j e ct: Food Technology SUBCELLULAR CHARACTERIZATION OF FOUR SORGHUM LINES THAT DIFFER IN ENDOSPERM TEXTURE AND TYPE A Thesis by RICHARD DON SULLINS Approved as to style and content by: Chai...

  2. Archived Reference Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  3. Archived Reference Building Type: Primary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  4. Repairing Type Errors in Functional Programs 

    E-Print Network [OSTI]

    McAdam, Bruce J

    Type systems for programming languages can be used by compilers to reject programs which are found to be unsound and which may, therefore, fail to execute successfully. When a program is rejected the programmer must repair it so that it can be type...

  5. Multiparty Asynchronous Session Types Kohei Honda

    E-Print Network [OSTI]

    Gay, Simon

    Multiparty Asynchronous Session Types Kohei Honda Queen Mary, University of London kohei 2005; Honda et al. 1998; Bonelli and Compagnoni 2008), higher- order processes (Mostrous and Yoshida. 2006, 2007; WS-CDL; Sparkes 2006; Honda et al. 2007a). A basic observation underlying session types

  6. Testing Type Class Laws Johan Jeuring

    E-Print Network [OSTI]

    Utrecht, Universiteit

    ]. Instances of Monad should satisfy the following laws: return a>>=k k a m >>=return m m >>=(x k x>>=h) (m>>=k)>>=hTesting Type Class Laws Johan Jeuring Patrik Jansson Cl´audio Amaral Technical Report UU-CS-2012.089 3508 TB Utrecht The Netherlands #12;Testing Type Class Laws Johan Jeuring Utrecht University and Open

  7. Archived Reference Building Type: Outpatient health care

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  8. Archived Reference Building Type: Outpatient health care

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  9. Archived Reference Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  10. Archived Reference Building Type: Strip mall

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  11. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    Minimization/ Volume Reduction 0 Solid Radioactive Waste $2,168 $0 $2,168 Vial Crusher for glass vialsWASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2004 WASTE TYPE DESCRIPTION DETAILS * Automotive Waste Substitution 510 Hazardous Waste $1,020 $1,000 $1,000 Aqueous Solvent

  12. WASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED,

    E-Print Network [OSTI]

    labeled chemicals Waste Minimization/ Volume Reduction 0 Solid Radioactive Waste $2,168 $3,795 $2,168 VialWASTE DESCRIPTION TYPE OF PROJECT POUNDS REDUCED, REUSED, RECYCLED OR CONSERVED IN 2003 WASTE TYPE DESCRIPTION DETAILS * Radioactive Waste Source Reduction 1,500 Radioactive Waste $6,000 $2,500 $6,000 Waste

  13. Archived Reference Building Type: Medium office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  14. Archived Reference Building Type: Medium office

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  15. Archived Reference Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed in or after 1980, organized by building type and location. A summary of building types and climate zones is available for reference. Current versions are also available.

  16. Project Name Project Number Tagging Type

    E-Print Network [OSTI]

    Project Name Project Number Primary Tagging Type Secondary Tagging Type Fish Species Tagging/ Secondary Legal Driver (BiOp, MOA, Accord, etc.) Tagging Purpose Funded Entity Tagging Location Retrieval CWT Recovery Project 2010-036-00 CWT PIT Chinook, coho retrieval, analysis, address PSMFC sampling

  17. Archived Reference Building Type: Secondary school

    Broader source: Energy.gov [DOE]

    Here you will find past versions of the commercial reference building models for existing buildings constructed before 1980, organized by building type and location. A summary ofbuilding types and climate zones is available for reference. Current versions are also available.

  18. Serum markers for type II diabetes mellitus

    DOE Patents [OSTI]

    Metz, Thomas O; Qian, Wei-Jun; Jacobs, Jon M; Polpitiya, Ashoka D; Camp, II, David G; Smith, Richard D

    2014-03-18T23:59:59.000Z

    A method for identifying persons with increased risk of developing type 2 diabetes mellitus utilizing selected biomarkers described hereafter either alone or in combination. The present invention allows for broad based, reliable, screening of large population bases and provides other advantages, including the formulation of effective strategies for characterizing, archiving, and contrasting data from multiple sample types under varying conditions.

  19. Names and Binding in Type Theory 

    E-Print Network [OSTI]

    Schöpp, Ulrich

    Names and name-binding are useful concepts in the theory and practice of formal systems. In this thesis we study them in the context of dependent type theory. We propose a novel dependent type theory with primitives for the explicit handling...

  20. ROOM AIR CONDITIONER WALL MOUNTED type

    E-Print Network [OSTI]

    Kleinfeld, David

    SPLIT TYPE ROOM AIR CONDITIONER WALL MOUNTED type Reciprocating Compressor Models Indoor unit.6 - 11.4 ----- MOISTURE REMOVAL ( / hr) 2.0 1.8 2.7 2.7 4.3 3 AIR CIRCULATION - Hi (m / hr) 800 800 1

  1. Interannual Variations of Arctic Cloud Types

    E-Print Network [OSTI]

    Hochberg, Michael

    Sciences #12;Changes in Arctic Climate What is the role of cloud cover in Arctic climate change? What is the Cloud Radiative Effect (CRE) in the Arctic? #12;CRE depends on season, cloud type CRE ­ whether clouds specifically chosen to include nighttime obs Total cloud cover and nine cloud types: - High cloud (cirriform

  2. 3, 46714700, 2003 Different type of

    E-Print Network [OSTI]

    Boyer, Edmond

    of the effect of different type of aerosols on UV-B radiation from measurements during EARLINET D. S. Balis1 , V properties and changes in cloud cover (Zerefos et al., 2001; WMO25 2003). Due to the combined involvementACPD 3, 4671­4700, 2003 Different type of aerosols and UV-B radiation D. S. Balis et al. Title Page

  3. Demand Side Dispatching, Part 2: An Industrial Application

    E-Print Network [OSTI]

    Nath, R.; Cerget, D. A.; Henderson, E. T.

    DEMAND SIDE DISPATCHING, Part 2: AN INDUSTRIAL APPUCATION Ravi Nath Donald A. Cerget Edward T. Henderson Sr. Consultant Sr. Account Executive Sr. Engineer Linnhoff March, Inc. Detroit Edison Detroit Edison Houston, TX Detroit, M1 Detroit, M1...

  4. Assigning phrase breaks from part-of-speech sequences 

    E-Print Network [OSTI]

    Taylor, Paul; Black, Alan W

    This paper presents an algorithm for automatically assigning phrase breaks to unrestricted text for use in a text-to-speech synthesizer. Text is first converted into a sequence of part-of-speech tags. Next a Markov model ...

  5. 40 Life stories by Qulutanguaq Jeremiassen (part 4.1)

    E-Print Network [OSTI]

    Leonard, Stephen Pax

    last updated on Monday, 4 April 2011 Accession Form for Individual Recordings: Collection / Collector Name Stephen Leonard Tape No. / Track / Item No. 41 Length of track 37 minutes Title of track Life stories by Qulutanguaq Jeremiassen (part 4...

  6. 32 Navarana Dunneq drum-dancing (part 2)

    E-Print Network [OSTI]

    Leonard, Stephen Pax

    last updated on Monday, 4 April 2011 Accession Form for Individual Recordings: Collection / Collector Name Stephen Leonard Tape No. / Track / Item No. 32 Length of track 2 minutes Title of track Navarana Dunneq drum-dancing (part 2) Translation...

  7. Grid Integration of Aggregated Demand Response, Part I: Load Availability

    E-Print Network [OSTI]

    LBNL-6417E Grid Integration of Aggregated Demand Response, Part I: Load Availability Profiles Resources 4 #12;#12;#12;CHAPTER 3: Results: DR Profiles 3.1 Projected Demand Response Availability in 2020

  8. advanced reactors part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 41 NC Smart Fleet Initiative is supported in part through the Clean Fuels Advanced Technology...

  9. actinobacillus pleuropneumonia part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    was performed to understand the correlation between printing parameters in the FDM 3D printing process, and the force required to remove a part from the build platform of a 3D...

  10. Ex Parte Communication re Energy Conservation Standards for Single...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standards for Single Package Vertical Air Conditioners and Single Package Vertical Heat Pumps, 79 Fed. Reg. 78,614 (Dec. 30, 2014) (Docket No. EERE-2012-BT-STD-0041) Ex Parte...

  11. The imaginary part of the gap function in color superconductivity

    E-Print Network [OSTI]

    Bo Feng; Defu Hou; Jiarong Li; Hai-cang Ren

    2006-09-16T23:59:59.000Z

    We clarify general properties of the energy gap regarding its functional dependence on the energy-momentum dictated by the invariance under a space inversion or a time reversal. Then we derive perturbatively the equation of the imaginary part of the gap function for dense QCD in weak coupling and generalize our results from 2SC case to CFL case. We confirm that the imaginary part is down by $g$ relative to the real part in weak coupling. The numerical results show that, up to the leading order, the imaginary part is no larger than one MeV at extremely large densities and can be as large as several MeV the densities are of physical interest.

  12. New Insights on congested part of the FD calibration

    E-Print Network [OSTI]

    Bertini, Robert L.

    New Insights on congested part of the FD calibration from Loop Detector Data Nicolas Chiabaut an automatic method that will permits efficient on-line calibration procedure #12;Outline of the paper

  13. LONG TERM FILE MIGRATION - PART II: FILE REPLACEMENT ALGORITHMS

    E-Print Network [OSTI]

    Jay Smith, Alan

    2011-01-01T23:59:59.000Z

    MIGRATION· PART II: FILE REPLACEMENT ALGORITHMS Alan Jaymay vary even though replacement fi~~d the pa~ameter value PIe N - P ;, RT I r:. fILE REPLACEMENT ALGORITHMS. I.lan ~1ar

  14. accelerated flight part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Index 1 Neutron energy and time-of-flight spectra behind the lateral shield of a high-energy electron accelerator beam dump. Part 2. Monte Carlo simulations CERN Preprints...

  15. The Materials Preparation Center - Making Rare Earth Metals - Part 3

    ScienceCinema (OSTI)

    Riedemann, Trevor

    2013-03-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 3 of 4.

  16. The Materials Preparation Center - Making Rare Earth Metals - Part 1

    ScienceCinema (OSTI)

    Riedemann, Trevor

    2013-03-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 1 of 4.

  17. United States Atomic Energy Commission formed, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    formed, part 2 As we continue looking at the transition of thinking that led to the United States Atomic Energy Commission and away from a United Nations Atomic Energy Commission,...

  18. Brigham Young University Geology Studies Volume 28, Part 3

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 28, Part 3 CONTENTS Three Creeks Caldera ................................................................................................................................... Scott Dean Geology of the Antelope Peak Area of the Southern .................................................................................................................. Craig D. Hall Geology of the Longlick and White Mountain Area, Southern San Francisco Mountains

  19. BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 27, Part I

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 27, Part I Preble Formation, a Cambrian Outer ..........................................................................J. Roger Olsen Geology of the Sterling Quadrangle, Sanpete County, Utah ..............................................................................James Michael Taylor Publications and Maps of the Geology Department Cover: Aertalphorograph rhowing

  20. The Materials Preparation Center - Making Rare Earth Metals - Part 4

    ScienceCinema (OSTI)

    Riedemann, Trevor

    2013-03-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 4 of 4.

  1. analysis part ii: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    & H Schiler Page 2 Hans Peter Schwefel PHD Schwefel, Hans-Peter 6 Capacity fade of Sony 18650 cells cycled at elevated temperatures Part II. Capacity fade analysis Engineering...

  2. USAEC, David Lilienthal and Oak Ridge, part 2

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Ridge, part 2 David Lilienthal's career spanned some pivotal times for energy production in the United States and the world. He met a most important mentor at Harvard, Felix...

  3. Part 1 Identify yourself (mandatory) Student Number: _______________________Queen's Email: ________________________________________

    E-Print Network [OSTI]

    Ellis, Randy

    First Name Initial Part 2 ­ Setup Pre-Authorized Payment Plan (PPL) · This method of Payment: ________________________________________________________ Pre-Authorized Payment Plan (PPL) (SGS Students Only) The personal information on this form

  4. Gas Turbine Technology, Part B: Components, Operations and Maintenance 

    E-Print Network [OSTI]

    Meher-Homji, C. B.; Focke, A. B.

    1985-01-01T23:59:59.000Z

    This paper builds on Part A and discusses the hardware involved in gas turbines as well as operations and maintenance aspects pertinent to cogeneration plants. Different categories of gas turbines are reviewed such as heavy duty aeroderivative...

  5. The Materials Preparation Center - Making Rare Earth Metals - Part 3

    SciTech Connect (OSTI)

    Riedemann, Trevor

    2011-01-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 3 of 4.

  6. The Materials Preparation Center - Making Rare Earth Metals - Part 1

    SciTech Connect (OSTI)

    Riedemann, Trevor

    2011-01-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 1 of 4.

  7. The Materials Preparation Center - Making Rare Earth Metals - Part 4

    SciTech Connect (OSTI)

    Riedemann, Trevor

    2011-01-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 4 of 4.

  8. The Materials Preparation Center - Making Rare Earth Metals - Part 2

    SciTech Connect (OSTI)

    Riedemann, Trevor

    2011-01-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 2 of 4.

  9. The Materials Preparation Center - Making Rare Earth Metals - Part 2

    ScienceCinema (OSTI)

    Riedemann, Trevor

    2013-03-01T23:59:59.000Z

    Trevor Riedeman, manager of the MPC Rare Earth Materials Section, gives a presentation on the importance of rare earth metals and how they are made at Ames Laboratory. Part 2 of 4.

  10. african foods part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    - Part III - U.S. Backlash Posted in May 24th, 2008 by Climate Patrol in Biofuel, Food Crisis, Sustainability In the last few 8 Elemo et al. Chemical evaluation of African palm...

  11. area part ii: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Derived Leaf Area Index over the High-Latitude Northern Hemisphere. Part II: Earth System Models CiteSeer Summary: Abstract: Leaf Area Index (LAI) is a key parameter in the...

  12. Smog Check II Evaluation Part II: Overview of Vehicle

    E-Print Network [OSTI]

    Denver, University of

    Smog Check II Evaluation Part II: Overview of Vehicle Emissions . . . . . . . . . . . . Prepared in Later Sections ____________________ 1 3. Older Vehicles Have Higher Emissions on Average _____________ 3 4. The Vehicle Fleet Is Dominated by Newer Vehicles______________ 8 5. More Recent Vehicle Models

  13. PART I: JOB DESCRIPTION Weighted Job Questionnaire (WJQ) Custom

    E-Print Network [OSTI]

    PART I: JOB DESCRIPTION Weighted Job Questionnaire (WJQ) Custom Department Name: Student,1412 SIMON FRASER UNIVERSITY & C.U.P.E., Local 3338 JOB DESCRIPTION 1. POSITION IDENTIFICATION Department

  14. act rcra part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Key parts of the Patient Protection and Affordable Care Act, also known as the health care reform law, go into effect January 1, 2014. When this Computer Technologies and...

  15. analysis techniques part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Handbook of Numerical Analysis. Volume V. Techniques of Scientific Computing. (Part 2)....

  16. air pollution part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    21 22 23 24 25 Next Page Last Page Topic Index 1 Co-benefits of Carbon Standards Part 1: Air Pollution Changes under Different 111d Options for Existing Power Plants Computer...

  17. Development of alternate parts for the aerospace industry

    E-Print Network [OSTI]

    Tapley, James Paul

    2010-01-01T23:59:59.000Z

    This thesis explores the topic of the development of alternate parts for the aerospace industry, drawing on industry examples to demonstrate methods and approaches and the benefits to firms engaged in these activities. I ...

  18. PP1c2 and PPP1R11 Are Parts of a Multimeric Complex in Developing Testicular Germ Cells in which their Steady

    E-Print Network [OSTI]

    PP1c2 and PPP1R11 Are Parts of a Multimeric Complex in Developing Testicular Germ Cells in which-type testis, PP1c2 forms an inactive complex with actin, protein phosphatase 1 regulatory subunit 7 (PPP1R7), and protein phosphatase 1 regulatory subunit 11 (PPP1R11), the latter, a potent PP1 inhibitor. Interestingly

  19. Abstract--The results presented in this paper are a part of the second phase of a body of research with the goal of co-

    E-Print Network [OSTI]

    Parker, Gary B.

    computation allows optimal development of robot's mind with minimal human influence. Yet, to confine the mind combined these pre-designed parts to evolve a robot suited for a certain type of movement. Manuscript with the goal of co- evolving the mind and morphology of dynamic robots. We use a 3-Dimensional simulated

  20. FEM Analysis of Nb-Sn Rutherford-type Cables

    SciTech Connect (OSTI)

    Barzi, Emanuela; Gallo, Giuseppe; Neri, Paolo; /Fermilab

    2011-01-01T23:59:59.000Z

    An important part of superconducting accelerator magnet work is the conductor. To produce magnetic fields larger than 10 T, brittle conductors are typically used. For instance, for Nb{sub 3}Sn the original round wire, in the form of a composite of Copper, Niobium and Tin, is assembled into a so-called Rutherford-type cable, which is used to wind the magnet. The magnet is then subjected to a high temperature heat treatment to produce the chemical reactions that make the material superconducting. At this stage the superconductor is brittle and its superconducting properties sensitive to strain. This work is based on the development of a 2D finite element model, which simulates the mechanical behavior of Rutherford-type cable before heat treatment. The model was applied to a number of different cable architectures. To validate a critical criterion adopted into the single Nb-Sn wire analysis, the results of the model were compared with those measured experimentally on cable cross sections.

  1. Complete genome sequence of Desulfomicrobium baculatum type strain (XT)

    SciTech Connect (OSTI)

    Copeland, Alex; Spring, Stefan; Goker, Markus; Schneider, Susanne; Lapidus, Alla; Glavina Del Rio, Tijana; Tice, Hope; Cheng, Jan-Fang; Lucas, Susan; Chen, Feng; Nolan, Matt; Bruce, David; Goodwin, Lynne; Pitluck, Sam; Ivanova, Natalia; Mavrommatis, Konstantinos; Ovchinnikova, Galina; Pati, Amrita; Chen, Amy; Palaniappan, Krishna; Land, Miriam; Hauser, Loren; Chang, Yun-Juan; Jefferies, Cynthia C; Meincke, Linda; Sims, David; Brettin, Thomas; Detter, John C; Han, Cliff; Chain, Patrick; Bristow, James; Eisen, Jonathan; Markowitz, Victor; Hugenholtz, Philip; Klenk, Hans-Peter; Kyrpides, Nikos C; Lucas, Susan

    2009-05-20T23:59:59.000Z

    Desulfomicrobium baculatum is the type species of the genus Desulfomicrobium, which is the type genus of the family Desulfomicrobiaceae. It is of phylogenetic interest because of the isolated location of the family Desulfomicrobiaceae within the order Desulfovibrionales. D. baculatum strain XT is a Gram-negative, motile, sulfate-reducing bacterium isolated from water-saturated manganese carbonate ore. It is strictly anaerobic and does not require NaCl for growth, although NaCl concentrations up to 6percent (w/v) are tolerated. The metabolism is respiratory or fermentative. In the presence of sulfate, pyruvate and lactate are incompletely oxidized to acetate and CO2. Here we describe the features of this organism, together with the complete genome sequence and annotation. This is the first completed genome sequence of a member of the deltaproteobacterial family Desulfomicrobiaceae, and this 3,942,657 bp long single replicon genome with its 3494 protein-coding and 72 RNA genes is part of the Genomic Encyclopedia of Bacteria and Archaea project.

  2. Faunal studies of the type Chesteran, Upper Mississippian of southwestern Illinois

    E-Print Network [OSTI]

    Furnish, W. M.; Saunders, W. B.; Burdick, D. W.; Strimple, H. L.

    1971-01-08T23:59:59.000Z

    THE UNIVERSITY OF KANSAS PALEONTOLOGICAL CONTRIBUTIONS January 8, 1971 Paper 51 FAUNAL STUDIES OF THE TYPE CHESTERAN, UPPER MISSISSIPPIAN OF SOUTHWESTERN ILLINOIS W. M. FURNISH, W. BRUCE SAUNDERS, D. W. BURDICK, and H. L. STRIMPLE The University... of Iowa, Iowa City Present address of W. BRUCE SAUNDERS, Department of Geology, Bryn Mawr College, Bryn Mawr, Pennsylvania PART 1 AMMONOIDS FROM THE MIDDLE CHESTER BEECH CREEK LIMESTONE, ST. CLAIR COUNTY W. M. FURNISH and W. BRUCE SAUNDERS ABSTRACT...

  3. Fully Reflexive Intensional Type Analysis in Type Erasure Semantics # Bratin Saha Valery Trifonov Zhong Shao

    E-Print Network [OSTI]

    Trifonov, Valery

    Fully Reflexive Intensional Type Analysis in Type Erasure Semantics # Bratin Saha Valery Trifonov Zhong Shao Department of Computer Science Yale University {saha,trifonov,shao}@cs.yale.edu Abstract

  4. Improving Type Ia Supernova Standard Candle Cosmology Measurements Using Observations of Early-Type Host Galaxies

    E-Print Network [OSTI]

    Meyers, Joshua Evan

    2012-01-01T23:59:59.000Z

    Host Galaxies of Type Ia Supernovae Introduction SN Ia Hosts109 C HAPTER 1 Cosmology, Type Ia Supernovae and HostGalaxies Observations of supernovae have played a role in

  5. Using DEDICOM for completely unsupervised part-of-speech tagging.

    SciTech Connect (OSTI)

    Chew, Peter A.; Bader, Brett William; Rozovskaya, Alla (University of Illinois, Urbana, IL)

    2009-02-01T23:59:59.000Z

    A standard and widespread approach to part-of-speech tagging is based on Hidden Markov Models (HMMs). An alternative approach, pioneered by Schuetze (1993), induces parts of speech from scratch using singular value decomposition (SVD). We introduce DEDICOM as an alternative to SVD for part-of-speech induction. DEDICOM retains the advantages of SVD in that it is completely unsupervised: no prior knowledge is required to induce either the tagset or the associations of terms with tags. However, unlike SVD, it is also fully compatible with the HMM framework, in that it can be used to estimate emission- and transition-probability matrices which can then be used as the input for an HMM. We apply the DEDICOM method to the CONLL corpus (CONLL 2000) and compare the output of DEDICOM to the part-of-speech tags given in the corpus, and find that the correlation (almost 0.5) is quite high. Using DEDICOM, we also estimate part-of-speech ambiguity for each term, and find that these estimates correlate highly with part-of-speech ambiguity as measured in the original corpus (around 0.88). Finally, we show how the output of DEDICOM can be evaluated and compared against the more familiar output of supervised HMM-based tagging.

  6. Individual plant examination program: Perspectives on reactor safety and plant performance. Part 1: Final summary report; Volume 1

    SciTech Connect (OSTI)

    NONE

    1997-12-01T23:59:59.000Z

    This report provides perspectives gained by reviewing 75 Individual Plant Examination (IPE) submittals pertaining to 108 nuclear power plant units. IPEs are probabilistic analyses that estimate the core damage frequency (CDF) and containment performance for accidents initiated by internal events. The US Nuclear Regulatory Commission (NRC) reviewed the IPE submittals with the objective of gaining perspectives in three major areas: (1) improvements made to individual plants as a result of their IPEs and the collective results of the IPE program, (2) plant-specific design and operational features and modeling assumptions that significantly affect the estimates of CDF and containment performance, and (3) strengths and weaknesses of the models and methods used in the IPEs. These perspectives are gained by assessing the core damage and containment performance results, including overall CDF, accident sequences, dominant contributions to component failure and human error, and containment failure modes. Methods, data, boundary conditions, and assumptions used in the IPEs are considered in understanding the differences and similarities observed among the various types of plants. This report is divided into three volumes containing six parts. Part 1 is a summary report of the key perspectives gained in each of the areas identified above, with a discussion of the NRC`s overall conclusions and observations. Part 2 discusses key perspectives regarding the impact of the IPE Program on reactor safety. Part 3 discusses perspectives gained from the IPE results regarding CDF, containment performance, and human actions. Part 4 discusses perspectives regarding the IPE models and methods. Part 5 discusses additional IPE perspectives. Part 6 contains Appendices A, B and C which provide the references of the information from the IPEs, updated PRA results, and public comments on draft NUREG-1560 respectively.

  7. Individual plant examination program: Perspectives on reactor safety and plant performance. Parts 2--5: Final report; Volume 2

    SciTech Connect (OSTI)

    NONE

    1997-12-01T23:59:59.000Z

    This report provides perspectives gained by reviewing 75 Individual Plant Examination (IPE) submittals pertaining to 108 nuclear power plant units. IPEs are probabilistic analyses that estimate the core damage frequency (CDF) and containment performance for accidents initiated by internal events. The US Nuclear Regulatory Commission (NRC) reviewed the IPE submittals with the objective of gaining perspectives in three major areas: (1) improvements made to individual plants as a result of their IPEs and the collective results of the IPE program, (2) plant-specific design and operational features and modeling assumptions that significantly affect the estimates of CDF and containment performance, and (3) strengths and weaknesses of the models and methods used in the IPEs. These perspectives are gained by assessing the core damage and containment performance results, including overall CDF, accident sequences, dominant contributions to component failure and human error, and containment failure modes. Methods, data, boundary conditions, and assumptions used in the IPEs are considered in understanding the differences and similarities observed among the various types of plants. This report is divided into three volumes containing six parts. Part 1 is a summary report of the key perspectives gained in each of the areas identified above, with a discussion of the NRC`s overall conclusions and observations. Part 2 discusses key perspectives regarding the impact of the IPE Program on reactor safety. Part 3 discusses perspectives gained from the IPE results regarding CDF, containment performance, and human actions. Part 4 discusses perspectives regarding the IPE models and methods. Part 5 discusses additional IPE perspectives. Part 6 contains Appendices A, B and C which provide the references of the information from the IPEs, updated PRA results, and public comments on draft NUREG-1560 respectively.

  8. Theoretical cosmic Type Ia supernova rates

    E-Print Network [OSTI]

    R. Valiante; F. Matteucci; S. Recchi; F. Calura

    2009-03-16T23:59:59.000Z

    The aim of this work is the computation of the cosmic Type Ia supernova rates at very high redshifts (z>2). We adopt various progenitor models in order to predict the number of explosions in different scenarios for galaxy formation and to check whether it is possible to select the best delay time distribution model, on the basis of the available observations of Type Ia supernovae. We also computed the Type Ia supernova rate in typical elliptical galaxies of different initial luminous masses and the total amount of iron produced by Type Ia supernovae in each case. It emerges that: it is not easy to select the best delay time distribution scenario from the observational data and this is because the cosmic star formation rate dominates over the distribution function of the delay times; the monolithic collapse scenario predicts an increasing trend of the SN Ia rate at high redshifts whereas the predicted rate in the hierarchical scheme drops dramatically at high redshift; for the elliptical galaxies we note that the predicted maximum of the Type Ia supernova rate depends on the initial galactic mass. The maximum occurs earlier (at about 0.3 Gyr) in the most massive ellipticals, as a consequence of downsizing in star formation. We find that different delay time distributions predict different relations between the Type Ia supernova rate per unit mass at the present time and the color of the parent galaxies and that bluer ellipticals present higher supernova Type Ia rates at the present time.

  9. Stability of winding cosmic wall lattices with X type junctions

    E-Print Network [OSTI]

    Brandon Carter

    2009-11-30T23:59:59.000Z

    This work confirms the stability of a class of domain wall lattice models that can produce accelerated cosmological expansion, with pressure to density ratio $w=-1/3$ at early times, and with $w=-2/3$ at late times when the lattice scale becomes large compared to the wall thickness. For walls of tension $T_{I}$, the relevant X type junctions could be unstable (for a sufficiently acute intersection angle $\\alpha$) against separation into a pair of Y type junctions joined by a compound wall, only if the tension $T_{II}$ of the latter were less than $2T_{I}$ (and for an approximately right-angled intersection if it were less that $\\sqrt{2} T_{I}$) which can not occur in the class considered here. In an extensive category of multicomponent scalar field models of forced harmonic (linear or non-linear) type it is shown how the relevant tension -- which is the same as the surface energy density $U$ of the wall -- can be calculated as the minimum (geodesic) distance between the relevant vacuum states as measured on the space of field values $\\Phi^i$ using a positive definite (Riemannian) energy metric $dU^2=\\tilde G_{ij} d\\Phi^i d\\Phi^j$ that is obtained from the usual kinetic metric (which is flat for a model with ordinary linear kinetic part) by application of a conformal factor proportional to the relevant potential function $V$. For suitably periodic potential functions there will be corresponding periodic configurations -- with parallel walls characterised by incrementation of a winding number -- in which the condition for stability of large scale bunching modes is shown to be satisfied automatically. It is suggested that such a configuration -- with a lattice lengthscale comparable to intergalactic separation distances -- might have been produced by a late stage of cosmological inflation.

  10. Picosecond Kinetics of Light Harvesting and Photoprotective Quenching in Wild-Type and Mutant Phycobilisomes Isolated from the

    E-Print Network [OSTI]

    van Stokkum, Ivo

    Picosecond Kinetics of Light Harvesting and Photoprotective Quenching in Wild-Type and Mutant In high light conditions, cyanobacteria dissipate excess absorbed energy as heat in the light-harvesting of water and the release of oxygen. The central parts of these photosystems, i.e., the reaction centers

  11. Optimization of Squeeze Casting for Aluminum Alloy Parts

    SciTech Connect (OSTI)

    David Schwam; John F. Wallace; Qingming Chang; Yulong Zhu

    2002-07-30T23:59:59.000Z

    This study was initiated with the installation of a new production size UBE 350 Ton VSC Squeeze Casting system in the Metal Casting Laboratory at Case Western University. A Lindberg 75k W electrical melting furnace was installed alongside. The challenge of installation and operation of such industrial-size equipment in an academic environment was met successfully. Subsequently, a Sterling oil die heater and a Visi-Track shot monitoring system were added. A significant number of inserts were designed and fabricated over the span of the project, primarily for squeeze casting different configurations of test bars and plates. A spiral ''ribbon insert'' for evaluation of molten metal fluidity was also fabricated. These inserts were used to generate a broad range of processing conditions and determine their effect on the quality of the squeeze cast parts. This investigation has studied the influence of the various casting variables on the quality of indirect squeeze castings primarily of aluminum alloys. The variables studied include gating design, fill time and fill patter, metal pressure and die temperature variations. The quality of the die casting was assessed by an analysis of both their surface condition and internal soundness. The primary metal tested was an aluminum 356 alloy. In addition to determining the effect of these casting variables on casting quality as measured by a flat plate die of various thickness, a number of test bar inserts with different gating designs have been inserted in the squeeze casting machine. The mechanical properties of these test bars produced under different squeeze casting conditions were measured and reported. The investigation of the resulting properties also included an analysis of the microstructure of the squeeze castings and the effect of the various structural constituents on the resulting properties. The main conclusions from this investigation are as follows: The ingate size and shape are very important since it must remain open until the casting is solidified and pressure is maintained on the solidifying casting. Fanned gates, particularly on the smaller section castings avoid jetting effects at the ingate end. The fan type ingate helps accomplish a rapid fill without high velocities. The molten metal has to fill the cavity before localized solidification occurs. This is best accomplished with a larger ingate to attain rapid filling without excessive velocity or jetting that occurs at high metal velocities. Straight gates are prone to case jetting of the metal stream even a low velocities. Fanned gates allow use of higher fill velocity without excessive jetting. A higher metal pressure provides a more complete fill of the die including improved compensation for solidification shrinkage. With the proper filling pattern, ingates, overflows and die temperature for a given die, very good tensile properties can be attained in squeeze casting. In general, the smaller squeeze castings require higher die temperatures. Computer models using the UES Procast and MagmaSoft finite element software can, after suitable adjustments, predict the flow pattern in the die cavity.

  12. Data mining for structure type prediction

    E-Print Network [OSTI]

    Tibbetts, Kevin (Kevin Joseph)

    2004-01-01T23:59:59.000Z

    Determining the stable structure types of an alloy is critical to determining many properties of that material. This can be done through experiment or computation. Both methods can be expensive and time consuming. Computational ...

  13. CHARACTERIZATION OF SIALON-TYPE MATERIALS

    E-Print Network [OSTI]

    Spencer, P.N.

    2010-01-01T23:59:59.000Z

    an Economical Refractory Material", Industrial Heating, 50-of Sialon-Type Materials Newman Spencer Lawrence BerkeleyEXPERIHENTAL PROCEDURES A. The Material L Ml H2 M3 and M4 B.

  14. Operations and Maintenance for Major Equipment Types

    Broader source: Energy.gov [DOE]

    Equipment lies at the heart of all operations and maintenance (O&M) activities. This equipment varies greatly across the Federal sector in age, size, type, model, condition, etc.

  15. Renewable Energy Opportunities by Renovation Type

    Broader source: Energy.gov [DOE]

    Renewable energy opportunities should be considered and identified in the earliest stages of Federal project planning and the team should assess the renewable energy options based on the type of...

  16. Nested Refinement Types for JavaScript /

    E-Print Network [OSTI]

    Chugh, Ravi

    2013-01-01T23:59:59.000Z

    Semantic Sub- typing with an SMT Solver. In InternationalNikolaj Bjørner. Z3: An Efficient SMT solver. In Tools andBy carefully coordinating SMT-based logical implication with

  17. Genomic analysis of control of cell type

    E-Print Network [OSTI]

    Frampton, Garrett M

    2011-01-01T23:59:59.000Z

    In mammalian development, a single fertilized egg grows into a complex organism, comprised of organs and tissues made up of hundreds of different specialized cell types. All of these cells contain the same genome, but ...

  18. The BMW Algebras of Type Dn

    E-Print Network [OSTI]

    Cohen, Arjeh M; Wales, David B

    2007-01-01T23:59:59.000Z

    The Birman-Murakami-Wenzl algebra (BMW algebra) of type Dn is shown to be free over the quotient of a polynomial algebra of dimension (2^n+1)n!!-(2^(n-1)+1)n! where n!! is the product of the first n odd integers. The Brauer algebra of type Dn is a homomorphic ring image and is also semisimple and free of the same dimesion, but over a different ring. A rewrite system for the Brauer algebra is used in upper bounding the dimension of the BMW algebra. As a consequence or our results, the generalized Temperley-Lieb algebra of type Dn is a subalgebra of the BMW algebra of the same type.

  19. Trace element geochemistry of ordinary chondrite chondrules: the type I/type II chondrule dichotomy

    E-Print Network [OSTI]

    Jacquet, Emmanuel; Gounelle, Matthieu

    2015-01-01T23:59:59.000Z

    We report trace element concentrations of silicate phases in chondrules from LL3 ordinary chondrites Bishunpur and Semarkona. Results are similar to previously reported data for carbonaceous chondrites, with rare earth element (REE) concentrations increasing in the sequence olivine ~ 10 K/h) than type I chondrules. Appreciable Na concentrations (3-221 ppm) are measured in olivine from both chondrule types; type II chondrules seem to have behaved as closed systems, which may require chondrule formation in the vicinity of protoplanets or planetesimals. At any rate, higher solid concentrations in type II chondrule forming regions may explain the higher oxygen fugacities they record compared to type I chondrules. Type I and type II chondrules formed in different environments and the correlation between high solid concentrations and/or oxygen fugacities with rapid cooling rates is a key constraint that chondrule formation models must account for.

  20. Detection of interlayer communication using type curves

    E-Print Network [OSTI]

    Tiefenthal, Sven A.

    1988-01-01T23:59:59.000Z

    with the adjacent formation through type curve analysis. The response caused by the essentially infinite acting producing zone alone can be filtered out using desuperposition. The remaining response is the "deviation function" caused by the leaking fault. Type.... TABLE OF CONTENTS Page ABSTRACT. ACKNOWLEDGEMENTS TABLE OF CONTENTS. LIST OF TABLES . V1 . viii LIST OF FIGURES. . . . . IX INTRODUCTION BACKGROUND THEORY Infinite Acting Reservoir. Linear Discontinuities. Fault Parameterization. . . . 8 9...

  1. A threshold type Cerenkov radiation detector

    E-Print Network [OSTI]

    Winningham, John David

    1965-01-01T23:59:59.000Z

    A THRESHOLD TYPE CERENKOV RADIATION DETECTOR A Thesis By JOHN DAVID WINNINGHAN Submitted to the Graduate College of the Texas A&M University in partial fulfillment of the requirements for the degree of NASTER OF SCIENCE May, 1965 Ha/or Sub...)ect: Physics A THRESHOLD TYPE CERENKOV RADIATION DETECTOR A Thesis By JOHN DAVID WINNINGHAM Approved as to style and content by: 3 v (Chairman of Committee) j' ) Heqd of Department) (Member) (Member) May, 1965 i. '. 11648 ACKNOWLEDGEIKNTS I wish...

  2. Industrial Heat Pumps--Types and Costs

    E-Print Network [OSTI]

    Chappell, R. N.; Bliem, C. J.; Mills, J. I.; Demuth, O. J.; Plaster, D. S.

    workings. from the waste heat flowing toward the cooling The three categories are: (a) electrically driven, utility. In practice, achieving. this objective (b) prime heat driven, and (c) waste heat driven. requires both proper integration of' the heat... shown in Figure 2 still holds except that the low temperature or waste heat is split, with part, Qb, going to the heat pump to be boosted to a higher temperature and part, Qd, going to the driver to drive the heat pump. The COP is defined as: COP...

  3. Questions and answers based on revised 10 CFR Part 20

    SciTech Connect (OSTI)

    Borges, T.; Stafford, R.S.; Lu, P.Y. [Oak Ridge National Lab., TN (United States); Carter, D. [Nuclear Regulatory Commission, Washington, DC (United States)

    1994-05-01T23:59:59.000Z

    NUREG/CR-6204 is a collection of questions and answers that were originally issued in seven sets and which pertain to revised 10 CFR Part 20. The questions came from both outside and within the NRC. The answers were compiled and provided by NRC staff within the offices of Nuclear Reactor Regulation, Nuclear Material Safety and Safeguards, Nuclear Regulatory Research, the Office of State Programs, and the five regional offices. Although all of the questions and answers have been reviewed by attorneys in the NRC Office of the General Counsel, they do not constitute official legal interpretations relevant to revised 10 CFR Part 20. The questions and answers do, however, reflect NRC staff decisions and technical options on aspects of the revised 10 CFR Part 20 regulatory requirements. This NUREG is being made available to encourage communication among the public, industry, and NRC staff concerning the major revisions of the NRC`s standards for protection against radiation.

  4. Geological Society of America Development of monoclines: Part I.

    E-Print Network [OSTI]

    Ze'ev, Reches

    . Today most geologists associate the term "monoclinal flexure" with a type of structure in which). However, they are well developed in orogenic belts such as the Rocky Mountains, the Jura Mountains

  5. Additive Manufacturing in China: Threats, Opportunities, and Developments (Part I)

    E-Print Network [OSTI]

    ANDERSON, Eric

    2013-01-01T23:59:59.000Z

    Wang Huaming Laser additive manufacturing (LAM) Huanglaser metal deposition (LMD), a type of additive manufacturing,Manufacturing Center) http://mat.hust.edu.cn:8080/3d/ Wuhan Yu Shengshi Selective laser

  6. Harold Cofer and the COLEX process, part 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the AEC for Y-12 to make significant progress had its origin in the explosion of a thermonuclear-type nuclear weapon by Russia on August 12, 1953. Building 9201-5 was cleaned out...

  7. Joining of parts via magnetic heating of metal aluminum powders

    DOE Patents [OSTI]

    Baker, Ian

    2013-05-21T23:59:59.000Z

    A method of joining at least two parts includes steps of dispersing a joining material comprising a multi-phase magnetic metal-aluminum powder at an interface between the at least two parts to be joined and applying an alternating magnetic field (AMF). The AMF has a magnetic field strength and frequency suitable for inducing magnetic hysteresis losses in the metal-aluminum powder and is applied for a period that raises temperature of the metal-aluminum powder to an exothermic transformation temperature. At the exothermic transformation temperature, the metal-aluminum powder melts and resolidifies as a metal aluminide solid having a non-magnetic configuration.

  8. Suitability for 3D Printed Parts for Laboratory Use

    SciTech Connect (OSTI)

    Zwicker, Andrew P. [PPPL; Bloom, Josh [PPPL; Albertson, Robert [PPPL; Gershman, Sophia [PPPL

    2014-08-01T23:59:59.000Z

    3D printing has become popular for a variety of users, from industrial to the home hobbyist, to scientists and engineers interested in producing their own laboratory equipment. In order to determine the suitability of 3D printed parts for our plasma physics laboratory, we measured the accuracy, strength, vacuum compatibility, and electrical properties of pieces printed in plastic. The flexibility of rapidly creating custom parts has led to the 3D printer becoming an invaluable resource in our laboratory and is equally suitable for producing equipment for advanced undergraduate laboratories.

  9. At Her Grace's Behest, Part 2 of 2

    E-Print Network [OSTI]

    2006-06-27T23:59:59.000Z

    1 fic post! ? Jun. 27th, 2006 at 6:10 PM Well, here it is, at last. *glances smugly at bookshop, then flounces away* -- At Her Grace's Behest, Part Two of Two by Branwyn (part one here.) Mina/Charlotte ahead. In a...Mina kind... the exact time of evening I would be at home to receive her call, I thought it best to make myself available as early as possible. Of course, Arc could, if she chose to take it upon herself, tell Charlotte what time I customarily came online of an evening...

  10. Ex Parte Communication re Energy Conservation Standards for Single Package

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742 33 1112011 Strategic Plan Departmentof1-SCORECARD-09-21-11 Page5-03DepartmentParteParteVertical Air

  11. Part_3_Minority_Economic_Impact.pdf | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level: National5Sales for4,645 3,625 1,006 492 742EnergyOn April 23, 2014, an OHA Administrative Judgea. Part B 1 Part B -

  12. Aging behavior of polymeric solar absorber materials - Part 1: Engineering plastics

    SciTech Connect (OSTI)

    Kahlen, S. [Polymer Competence Center Leoben GmbH, Roseggerstrasse 12, Leoben 8700 (Austria); Wallner, G.M.; Lang, R.W. [Institute for Polymeric Materials and Testing, University of Linz, Altenbergerstrasse 69, Linz 4040 (Austria)

    2010-09-15T23:59:59.000Z

    In this series of two papers, various polymeric materials are investigated as to their potential applicability as absorber materials for solar thermal collectors. The focus of the investigation is to study the aging behavior of these materials under maximum operating conditions (80 C in water up to 16,000 h) and stagnation conditions (140 C in air up to 500 h) typical for northern climate. The materials supplied or produced as polymer films were first characterized in the unaged state and then for different states of aging by differential scanning calorimetry (DSC), by size exclusion chromatography (SEC) and by mechanical tensile tests. Physical aging phenomena were studied by DSC, SEC analysis provided information on chemical degradation of the materials. In addition, physical and chemical aging were both analyzed via the small and large strain mechanical behavior. While the present Part 1 of this paper series deals with the aging behavior of engineering plastics, including two amorphous polymers (a polyphenylene ether polystyrene blend (PPE + PS) and polycarbonate (PC)) and two semi-crystalline polymers (two types of polyamide 12 (PA12)), the aging behavior of so-called ''commodity'' plastics (PE and PP) is the subject of Part 2. Comparing the two aging conditions, the amorphous materials (PPE + PS and PC) turned out to be more prone to physical and chemical aging at 140 C in air. In contrast, the semi-crystalline PA12 materials were more strongly affected by exposure to water at 80 C, although to different degrees, depending on the modification. (author)

  13. SN Typing for the SDSS SN Survey

    SciTech Connect (OSTI)

    Rivers, Elizabeth S.; /Wellesley Coll. /SLAC

    2005-12-15T23:59:59.000Z

    In the fall of 2004 the Sloan Digital Sky Survey (SDSS) 2.5m telescope scanned the southern equatorial stripe for approximately 20 nights over the space of two months. Light curves for over four dozen supernovae (SNe) were collected over time using five colored filters ugriz that together had a range of approximately 3000{angstrom} to 10500{angstrom}. 22 SNe were spectroscopically confirmed with follow-up observation. Using the data obtained in the Fall 2004 campaign, preparations are now being made for the Supernova Survey of the SDSS II, a three-year extension of the original project. One main goal of the Supernova Survey will be to identify and study type Ia SNe of up to redshift {approx}0.4, the intermediate ''redshift desert'', as well as enabling further study of other types of SNe including type 1b/c and peculiar SNe. Most of the SNe found will not have spectra taken, due to time and cost constraints. Thus it would be advantageous to be able to robustly type SNe solely from the light curves obtained by the SDSS telescope prior to, or even without ever obtaining a spectrum. Using light curves of well-observed SNe templates were constructed for comparison with unknown SNe in order to photometrically type them.

  14. Simple visualization techniques for die casting part and die design. Final report, July 1, 1995--September 30, 1997

    SciTech Connect (OSTI)

    Miller, R.A.; Lu, S.C.; Rebello, A.B.

    1998-05-01T23:59:59.000Z

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects of problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information from the voxel model for display to the user.

  15. Simple visualization techniques for die casting part and die design. Final report, July 1, 1995--September 30, 1997

    SciTech Connect (OSTI)

    Miller, R.A.; Lu, S.C.; Rebello, A.B.

    1998-05-01T23:59:59.000Z

    The objective of this work was to develop and test die casting design evaluation techniques based on the visualization of geometric data that is related to potential defects of problems. Specifically, thickness information is used to provide insight into potential thermal problems in the part and die. Distance from the gate and a special type of animation of the fill pattern is used to provide an assessment of gate, vent and overflow locations. Techniques have been developed to convert part design information in the form of STL files to a volume-based representation called a voxel model. The use of STL files makes the process CAD system independent. Once in voxel form, methods that were developed in this work are used to identify thick regions in the part, thin regions in the part and/or die, distance from user specified entry locations (gates), and the qualitative depiction of the fill pattern. The methods were tested with a prototype implementation on the UNIX platform. The results of comparisons with numerical simulation and field reported defects were surprisingly good. The fill-related methods were also compared against short-shots and a water analog study using high speed video. The report contains the results of the testing plus detailed background material on the construction of voxel models, the methods used for displaying results, and the computational geometric reasoning methods used to create die casting-related information form the voxel model for display to the user.

  16. APPENDIX D PART 2 DEPARTMENTS OF CLINICAL SCIENCES AND MEDICAL

    E-Print Network [OSTI]

    Foroosh, Hassan

    APPENDIX D ­ PART 2 DEPARTMENTS OF CLINICAL SCIENCES AND MEDICAL EDUCATION College of Medicine:_______________________________ PROGRESS REPORT for Calendar Year _______ Refer to the Final assignment for the past year to review your your progress towards these goals. Activity and percentage Progress and achievements 1. Instructional

  17. AMIS-Training Material iReport Training Part 2

    E-Print Network [OSTI]

    Farritor, Shane

    AMIS- Training Material iReport Training ­Part 2 (iReport-3.0.0) Topic: Parameters · Open a report- Training Material · Open the `Document structure' Page 2 of 7 6/27/2008 Institutional Research and Planning University of Nebraska-Lincoln #12;AMIS- Training Material · Right click on `Parameters' > Add > Parameter

  18. Statistics: Part 1 1. Why bother with statistics?

    E-Print Network [OSTI]

    Francis, Paul

    Statistics: Part 1 1. Why bother with statistics? Why is statistics so necessary for observational. But your data just don't seem to back up their claim. Statistics allows you to determine how confidently) practical introduction to those bits of statistics most vital to observational astronomy. 2. What

  19. SOIL MOISTURE CHARACTERISTICS IN UPPER PART OF HINDON RIVER CATCHMENT

    E-Print Network [OSTI]

    Kumar, C.P.

    of the contribution of various parts of a watershed to the ground water storage. Convenient and reliable techniques for the water demand of the vegetation, as well as for the recharge of the ground water storage. A fair into ground water aquifers. For analytical studies on soil moisture regime, critical review and accurate

  20. CALIBRATION Parts Set version 8/10/99 STARDUST SPACECRAFT

    E-Print Network [OSTI]

    SOLAR PANELS PANEL STIFFENER PANEL STIFFENER WHIPPLE SHIELDWHIPPLE SHIELD SHIELD SPACERS SHIELD SPACERS-classroom use must be obtained from JPL Commercial Programs Office. #12;X X - Z PANEL REM STAR CAMERAS + Z PANEL X X CUT OUT PRINTING CALIBRATION STARDUST SPACECRAFT Scale Model Parts SHEET 2 + Y PANEL - Y PANEL

  1. Measuring Residential Ventilation System Airflows: Part 1 Laboratory

    E-Print Network [OSTI]

    1 Measuring Residential Ventilation System Airflows: Part 1 ­ Laboratory Evaluation of Airflow: residential, mechanical ventilation, measurement, ASHRAE 62.2, flow hood ABSTRACT Building codes increasingly require tighter homes and mechanical ventilation per ASHRAE Standard 62.2. These ventilation flows must

  2. adhesive dynamics part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    adhesive dynamics part First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Live-cell photoactivated...

  3. Cowards in Our Democracies: Part 2 28 January 2012

    E-Print Network [OSTI]

    Hansen, James E.

    reserve to transform the planet, and fossil fuel subsidies and technological advances will make more to persuade the public of the urgency to reduce fossil fuel CO2 emissions. This is in part because people profiting from fossil fuel business-as-usual support disinformation about the science, so that they can

  4. Fish Health Management Considerations in Recirculating Aquaculture Systems -Part 1

    E-Print Network [OSTI]

    Watson, Craig A.

    Cir 120 Fish Health Management Considerations in Recirculating Aquaculture Systems - Part 1 operations, and retail pet stores. When properly managed, these systems have the advantages of both reducing of nutrition and water quality, as compared to pond systems. However, recirculating systems have their own

  5. Kharisma Jaya Gemilang (KJG), an Indonesian company part-

    E-Print Network [OSTI]

    companies based in Asia, Africa, and South America. We are also engaged in timber trade policy initiativesKharisma Jaya Gemilang (KJG), an Indonesian company part- nering with TTAP received the Tropical verification through a variety of site visits of companies engaged in the process. Rachel But- ler, Head

  6. PRODUCTION PLANNING BASED ON RELIABILITY MODELS FOR PART REUSE

    E-Print Network [OSTI]

    Shu, Lily H.

    PRODUCTION PLANNING BASED ON RELIABILITY MODELS FOR PART REUSE Takeshi Murayama, Hiroshi Obata, Canada Abstract: This paper describes a production planning procedure addressing the issue that the timings and quantities of returned products and reusable components included in them is unknown

  7. STUDY OF RADIOACTIVE IMPURITIES IN SOLIDS PART ONE : RADIATION CHARACTERISTICS

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    285 STUDY OF RADIOACTIVE IMPURITIES IN SOLIDS PART ONE : RADIATION CHARACTERISTICS F. HARTMANN problem of the emission of radiation by radioactive nuclei is usually treated in a very general form for the computation of relaxation and radiofrequency effects. LE JOURNAL DE PHYSIQUE TOME 33, FÃ?VRIER-MARS 1972

  8. Part of the National Nuclear User Facility Culham Materials

    E-Print Network [OSTI]

    Part of the National Nuclear User Facility Culham Materials Research Facility #12;Introduction from Professor Steve Cowley Culham's Materials Research Facility (MRF) is a valuable addition to the UK's suite and fusion ­ with equipment for the processing and micro-characterisation of radioactive materials, for on

  9. Female Health Issues: Part I Gynecological Dif:iculties

    E-Print Network [OSTI]

    Dever, Jennifer A.

    care provider B. The Progressive Era (1890's-1920's) · Reformers worked to change availability of prenatal & child health care #12;10/29/12 3 C. 60's & 70's redefining10/29/12 1 Female Health Issues: Part I ­ Gynecological Dif:iculties I

  10. Construction safety in DOE. Part 1, Students guide

    SciTech Connect (OSTI)

    Handwerk, E C

    1993-08-01T23:59:59.000Z

    This report is the first part of a compilation of safety standards for construction activities on DOE facilities. This report covers the following areas: general safety and health provisions; occupational health and environmental control/haz mat; personal protective equipment; fire protection and prevention; signs, signals, and barricades; materials handling, storage, use, and disposal; hand and power tools; welding and cutting; electrical; and scaffolding.

  11. Porous Pavements in Cold Climates Part 1: Design, Installation, and

    E-Print Network [OSTI]

    Porous Pavements in Cold Climates Part 1: Design, Installation, and Maintenance A Green Pavements and Infiltration Beds Joshua F. Briggs, Geosyntec, Kristopher Houle, Horsley Witten Group Jeff Manager, CH2M HILL ASCE Committee Report on Recommended Design Guidelines for Permeable Pavements

  12. Porous Pavement in Cold Climates Part: Performance and Cost

    E-Print Network [OSTI]

    Porous Pavement in Cold Climates Part: Performance and Cost Onondaga Environmental Institute 17 #12;Overview 1. Hydrology of Permeable Pavements 2. Water Quality Performance 3. Hydraulic Performance However, a large number of installations STILL continue to be sub-standard 4 #12;Porous Pavement Design

  13. Plant Ecology -Chapter 2 Photosynthesis & Light: part 3

    E-Print Network [OSTI]

    Cochran-Stafira, D. Liane

    1 Plant Ecology - Chapter 2 Photosynthesis & Light: part 3 Rates of Photosynthesis Basic limiting) Rates of Photosynthesis Strong light - respiration plus photosynthesis - giving off and taking up CO2, up to a point Maximum rate of photosynthesis, despite further increase in light energy Ecological

  14. A Study of Educational Simulations Part I -Engagement and Learning

    E-Print Network [OSTI]

    Colorado at Boulder, University of

    A Study of Educational Simulations Part I - Engagement and Learning W. K. Adams, S. Reid, R. Le and learn) Fun Credibility of Simulations Performance Mode Discussion PhET Look and Feel Underlying provides a rich body of data for the study of student thinking and learning while using simulations

  15. Be a part of something bigger than yourself GE Healthcare

    E-Print Network [OSTI]

    Rimon, Elon

    Be a part of something bigger than yourself GE Healthcare Position: Mechanical Engineer as a contractor · Working at GE site at Tirat-Carmel. · Start: immediately · Duration 6-10 months, with optional elongation. ElgemsMoked@ge.com-CV www.gehealthcare.com We are GE Healthcare, a $17 billion division

  16. Brigham Young University Geology Studies Volume 28, Part 2

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 28, Part 2 Lower and Middle Ordovician at Section G, Ibex, Utah. #12;A publication of the Department of Geology Brigham Young University Provo, Utah o ~ l z gUfziversity Geology Studies is published by the Department of Geology. This publication

  17. Children'sLiteratureand Economics,Part3!

    E-Print Network [OSTI]

    Dasgupta, Dipankar

    Children'sLiteratureand Economics,Part3! Grades K-2 When Saturday, September 6, 2014 Time 9:00AM to 12:00 PM Where Room 121 Fogelman Classroom Building Fogelman College of Business and Economics the last workshop on using children's literature to teach economics and financial literacy? Well, we have

  18. Reactive Rearrangement of Parts under Sensor Inaccuracy: Particle Filter Approach

    E-Print Network [OSTI]

    Reactive Rearrangement of Parts under Sensor Inaccuracy: Particle Filter Approach Hal^uk Bayram, Electrical and Electronic Engineering Bogazici University, Bebek 34342 Istanbul Turkey Abstract-- The paper will be left undisturbed, the robot is required to employ a reactive strategy. A feedback-based event

  19. BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 27, Part 3

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 27, Part 3 CONTENTS Studies for Students #lo, Geologic Guide to Provo Canyon and Weber Canyon, Central Wasatch Mountains, Utah ............................................................................................................................. Randy L. Chamberlain The Geology of the Drum Mountains, Millard and Juab Counties, Utah

  20. Brigham Young University Geology Studies Volume 26, Part I

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 26, Part I Papers presented at the 31st annual meeting, Rocky Mountain Section, Geological Society of America, April 28-29, 1978, at Brig- ham Young ............................................................................................................................Publications and Maps of the Geology Department 91 Cover The Great Basrn seen from a htgh

  1. Brigham Young University Geology Studies Volume 27, Part 2

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 27, Part 2 CONTENTS The Kinnikinic Quartzite ........................................................Robert Q. Oaks,Jr., and W . Calvin James Geology of the Sage Valley 7 W'Quadrangle, Caribou County, Idaho, and Lincoln County, Wyoming ....................J ohn L. Conner Geology of the Elk Valley Quadrangle, Bear

  2. BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 26, Part 4

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 26, Part 4 The Fossil Vertebrates of Utah Salt Lake Gty, Utah 84102 W .E. Miller Deparlment~of Geology and Zoology Bngham Young Unrwerrrly Provo of Geology Brigham Young University Provo, Utah 84602 Editors W. Kenneth Hamblln Cynthia M. Gardner Issue

  3. Brigham Young University Geology Studies Volume 24, Part 2

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 24, Part 2 CONTENTS Studies for Students ............................................................................................................................... Robert C. Ahlborn Publications and Maps of the Geology Department Cover: Sahara dune sand, X130. Photo, Univer~ityof Cincinnati, Cincinnati, Ohio 45221. #12;A publication of the Department of Geology Brigham

  4. Brigham Young University Geology Studies Volume 29, Part 2

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 29, Part 2 CONTENTS Stratigraphy ...................................................................................................... Terry C. Gosney 27 Geology of the Champlin Peak Quadrangle,Juab and Millard Counties, Utah ..................................................................................................................................... David R. Keller 103 Publications and Maps of the Department of Geology 117 Cover: Rafted orjoreign

  5. BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 25,Part 1

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;BRIGHAM YOUNG UNIVERSITY GEOLOGY STUDIES Volume 25,Part 1 Papers reviewing geology of field trip areas, 31st annual meeting, Rocky Mountain Section, Geological Society of America, April 28 ....................................................................................................................................................... Geology of Volcanic Rocks and Mineral Deposits in the Southern Thomas Range, Utah: A Brief Summary

  6. Brigham Young University Geology Studies Volume 30, Part 1

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 30, Part 1 CONTENTS Diagenetic Aspects ................................................................................................... Steven G. Driese Geology of the Dog Valley-Red Ridge Area, Southern Pavant Mountains, Millard County .................................................................................................. Lynn C Meibos Geology of the Southwestern Quarter of the Scipio North (15-Minute) Quadrangle, Millard

  7. Brigham Young University Geology Studies Volume 25, Part 3

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 25, Part 3 CONTENTS Remains of Ornithopod ...........................................................................................................................................................ames M. Stolle Publications and Maps of the Geology Department Index to volumes 21-25 of Brigham Young University Geology Studies ........................................Carol T . Smith and Nathan M. Smith Cwec

  8. Brigham Young University Geology Studies Volume 26, Part 2

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;Brigham Young University Geology Studies Volume 26, Part 2 CONTENTS A New Large Theropod................................................................................................................................................................ Danny J. Wyatt Publications and Maps of the Geology Department Cover: Cretaceouscoals near Castle Gate, Utab. #12;A publication of the Department of Geology Brigham Young University Provo, Utah 84602 Editors

  9. Brigham Young University Geology Studies Volume 26, Part 3

    E-Print Network [OSTI]

    Seamons, Kent E.

    #12;P I - #12;Brigham Young University Geology Studies Volume 26, Part 3 Conodont Biostratigraphy-meeting field trip held in conjunction with the Rocky Mountain section, Geological Society of America of the Department of Geology Brigham Young University Provo, Utah 84602 Editors W. Kenneth Hamblin Cynthia M

  10. Journal Title: Journal of polymer science. Part B, Polymer physics

    E-Print Network [OSTI]

    Fleming, Paul D. "Dan"

    composites. rigid rod polymer. mo- lecular modeling. poly (azomethine) · epoxy. glass/epoxy composite. Such composites would find * To whom correspondence should be addressed. Journal of Polymer Science: Part B molecular composite. Since heat conduction oc- curs more efficiently intramolecularly (through bonds) than

  11. PART II TECHNIQUES PROJECT MODELLING OF THE CORROSION OF

    E-Print Network [OSTI]

    Cambridge, University of

    - 1 - PART II TECHNIQUES PROJECT MODELLING OF THE CORROSION OF BINARY ALLOYS R.A. Jones Produced and temperatures. In this work a neural network method was employed to study how the rate of corrosion of Fe accordance with the literature. 1. Introduction The atmosphere is the corrosive environment to which alloys

  12. REINVENTING ACADEMIC PUBLISHING ONLINE PART I: RIGOR, RELEVANCE AND PRACTICE

    E-Print Network [OSTI]

    Whitworth, Brian

    . Part 1 of this paper chronicles the inevitable limits of what can only be called a feudal academic-involvement and inaccessibility. We predict an upcoming social upheaval in academic publishing as it shifts from feudal in our #12;2 field, many of whom are personal friends. Our target is the feudal knowledge exchange system

  13. 1. Introduction 1-1 Part 1: Introduction

    E-Print Network [OSTI]

    Brass, Stefan

    1. Introduction 1-1 Part 1: Introduction References: · Ramez Elmasri, Shamkant B. Navathe: Database Modeling & Design, 3rd Edition. Morgan Kaufmann, 1999, ISBN 1-55860-500-2. · Graeme C. Simsion, Graham C. Witt: Data Modeling Essentials, 2nd Edition. Coriolis, 2001, ISBN 1-57610-872-4, 459 pages

  14. Biholomorphic maps with linear parts having Jordan blocks: linearization and

    E-Print Network [OSTI]

    Jordan block. Our main result proves convergence of the linearizing transformation of maps for which the Jordan part of the spectrum lies inside the unit circle and the spectrum satis#12;es a R in (C [x]) n , (1.2) where C [x] stands for the set of all formal power series with complex coe

  15. Solar Energy Education. Solar solutions: Reader, Part III

    SciTech Connect (OSTI)

    Not Available

    1981-05-01T23:59:59.000Z

    A collection of magazine articles which focus on the subject of solar energy is presented in this booklet. This is the third of a four part series of the Solar Energy Reader books. The articles provide brief discussions on the various applications of solar energy including: heat, photovoltaics; wind, hydro, and biomass. A glossary of terms is included. (BCS)

  16. Wavelets and Fourier Transforms, WISM453 Part 1: Fourier Theory

    E-Print Network [OSTI]

    Sleijpen, Gerard

    Wavelets and Fourier Transforms, WISM453 Part 1: Fourier Theory G.L.G. Sleijpen Department of Mathematics Utrecht University August 18, 2008 1 #12;i Preface Fourier Theory belongs to the basic who works in such a field should feel comfortable with Fourier transforms. But Fourier The- ory also

  17. The Vanderbilt Haptic Paddle Assembly Guide and Parts List

    E-Print Network [OSTI]

    Webster III, Robert James

    the accuracy to cut a press fit hole. The laser cutter files provided on the VHP website will create a narrow Section at the end of the document. Manufacturing the VHP requires a laser cutter, lathe, and drill press. Figure 2: Laser-cut acrylic parts are bonded with acrylic cement to form a sturdy frame. 2 Press PTFE

  18. Fast and Robust Algorithm for Compositional Modeling: Part II--

    E-Print Network [OSTI]

    Firoozabadi, Abbas

    later) we have noticed that compositional modeling of a rich-retrograde gas condensate het- erogeneous of our study, stability analysis testing in the reduced space was formulated, and its robustness- sitional modeling, stability analysis testing in the reduction method was presented.1 In this paper, Part

  19. Tutorial on seismic interferometry: Part 1 --Basic principles and applications

    E-Print Network [OSTI]

    Snieder, Roel

    Tutorial on seismic interferometry: Part 1 -- Basic principles and applications Kees Wapenaar1 , Deyan Draganov1 , Roel Snieder2 , Xander Campman3 , and Arie Verdel3 ABSTRACT Seismic interferometry is the retrieval of seismic surface-wave responses from ambient noise and the subsequent tomographic determination

  20. Rearrangements in genomes with centromeres part I: translocations

    E-Print Network [OSTI]

    Shamir, Ron

    Rearrangements in genomes with centromeres part I: translocations Michal Ozery-Flato and Ron Shamir. Every new chromosome created by a genome rearrange- ment event must have a centromere in order to survive. This constraint has been ignored in the computational modeling and analysis of genome

  1. absorption spectrometry part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    absorption spectrometry part First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Overtone Mobility...

  2. airplane construction part: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    airplane construction part First Page Previous Page 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 Next Page Last Page Topic Index 1 Constructions of Optical...

  3. Reproducing kernel element method Part III: Generalized enrichment and applications

    E-Print Network [OSTI]

    Li, Shaofan

    Reproducing kernel element method Part III: Generalized enrichment and applications Hongsheng Lu enrichment is proposed to construct the global partition polynomials or to enrich global partition polynomial. This is accomplished by either multiplying enrichment functions with the original global partition poly- nomials

  4. Fiber-type dosimeter with improved illuminator

    DOE Patents [OSTI]

    Fox, R.J.

    1985-12-23T23:59:59.000Z

    A single-piece, molded plastic, Cassigrainian-type condenser arrangement is incorporated in a tubular-shaped personal pocket dosimeter of the type which combines an ionization chamber with an optically-read fiber electrometer to provide improved illumination of the electrometer fiber. The condenser routes incoming light from one end of the dosimeter tubular housing around a central axis charging pin assembly and focuses the light at low angles to the axis so that it falls within the acceptance angle of the electrometer fiber objective lens viewed through an eyepiece lens disposed in the opposite end of the dosimeter. This results in improved fiber illumination and fiber image contrast.

  5. Transformations of $W$-Type Entangled States

    E-Print Network [OSTI]

    S. K?nta?; S. Turgut

    2010-03-10T23:59:59.000Z

    The transformations of $W$-type entangled states by using local operations assisted with classical communication are investigated. For this purpose, a parametrization of the $W$-type states which remains invariant under local unitary transformations is proposed and a complete characterization of the local operations carried out by a single party is given. These are used for deriving the necessary and sufficient conditions for deterministic transformations. A convenient upper bound for the maximum probability of distillation of arbitrary target states is also found.

  6. Uniqueness theorems for equations of Keldysh Type

    E-Print Network [OSTI]

    Thomas H. Otway

    2010-05-25T23:59:59.000Z

    A fundamental result that characterizes elliptic-hyperbolic equations of Tricomi type, the uniqueness of classical solutions to the open Dirichlet problem, is extended to a large class of elliptic-hyperbolic equations of Keldysh type. The result implies the non-existence of classical solutions to the closed Dirichlet problem for this class of equations. A uniqueness theorem is also proven for a mixed Dirichlet-Neumann problem. A generalized uniqueness theorem for the adjoint operator leads to the existence of distribution solutions to the closed Dirichlet problem in a special case.

  7. Cytophotometric studies of schiff-type reagents

    E-Print Network [OSTI]

    Aviles-Rios, Norman D

    1960-01-01T23:59:59.000Z

    : oc, ttscl, ::toca, cl 96lfttf, AEPMGIX j) t I" Absorption P aks Prom Cells Stained, by and. by Schiff-type Reagents in Peulgsn chiff 8 Heave t 1 and PAS Hsactions Absorption Peaks After Stainin Hsaction Feul en Acriflavins-S02 Bismarelc... stxain mice. Table XIX He&, DR Values in House Liver parenchymal Cells after staining with Schiff-type Reagents in FeulEen Hoactionl Ilesn Standard. Standard Standard Deviation . rror in j~ Deviation in ; of of I'lean liean Gismarclk brown Y 802 3...

  8. Platinum-barium-type L zeolite

    SciTech Connect (OSTI)

    Buss, W.C.; Hughes, T.R.

    1987-01-06T23:59:59.000Z

    A method is described of reforming hydrocarbons comprising contacting the hydrocarbons with a catalyst comprising: (a) a type L zeolite; (b) at least one Group VIII metal; and (c) an alkaline earth metal selected from the group consisting of barium, strontium and calcium. A method is described of dehydrocyclizing acyclic hydrocarbons comprising contacting the hydrocarbons with a catalyst comprising: (a) a type L zeolite (b) at least one Group VIII metal; and (c) an alkaline earth metal selected from the group consisting of barium, strontium and calcium.

  9. Proposed statistical performance measures for microprocessor-based transmission-line protective relays. Part 1: Explanation of the statistics

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    The paper presents practical calculations and novel techniques for collecting performance data from protective relays. The methods are focused on, but not limited to, microprocessor-based transmission line relaying systems. Standard definitions are presented for Availability, Dependability, Security, Hardware MTBF, Relaying MTBF, Repair Time, and other measures of interest for specific relay types. The paper explains the novel concept of Exposures, the key to a standardized security measure. A companion paper, Part 2--Collection and Uses of Data, gives practical guidelines for gathering and calculation of results. With these standard measures, relay users will be able to compile the first consistent industry-wide data base for relay performance assessment.

  10. A numerical model of aerosol scavenging: Part 1, Microphysics parameterization

    SciTech Connect (OSTI)

    Molenkamp, C.R.; Bradley, M.M.

    1991-09-01T23:59:59.000Z

    We have developed a three-dimensional numerical model (OCTET) to simulate the dynamics and microphysics of clouds and the transport, diffusion and precipitation scavenging of aerosol particles. In this paper we describe the cloud microphysics and scavenging parameterizations. The representation of cloud microphysics is a bulk- water parameterization which includes water vapor and five types of hydrometeors (cloud droplets, rain drops, ice crystals, snow, and graupel). A parallel parameterization represents the scavenging interactions between pollutant particles and hydrometeors including collection of particles because of condensation nucleation, Brownian and phoretic attachment, and inertial capture, resuspension because of evaporation and sublimation; and transfer interactions where particles collected by one type of hydrometeor are transferred to another type of freezing, melting, accretion, riming and autoconversion.

  11. Types of Utility Energy Service Contracts

    Broader source: Energy.gov [DOE]

    Several types of contracts are used as utility energy service contracts (UESCs). Many agency sites procure electricity services under a contract with the local utility, and most of these contracts have provisions that can also cover energy efficiency projects. Agencies not covered by such agreements may enter contracts with the utility for the sole purpose of implementing energy projects.

  12. FOOD PRESERVATION SERIES types of potatoes

    E-Print Network [OSTI]

    FOOD PRESERVATION SERIES Potato types of potatoes hOW TO STORE PotatoMichigan-grown potatoes and make excellent mashed potatoes. yield FOOD SAFETY TIPS One pound 3 medium potatoes. 3 cups peeled canner load of 9 pints 50 pounds 18 ­ 22 quarts Purchase potatoes that are firm and do not have bruises

  13. Reference Buildings by Building Type: Small Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  14. Reference Buildings by Building Type: Large Hotel

    Office of Energy Efficiency and Renewable Energy (EERE)

    In addition to the ZIP file for each building type, you can directly view the "scorecard" spreadsheet that summarizes the inputs and results for each location. This Microsoft Excel spreadsheet is also included in the ZIP file. For version 1.4, only the IDF file is included.

  15. Type-Logical Hyperedge Replacement Grammars

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Type-Logical and Hyperedge Replacement Grammars Draft Richard Moot LaBRI (CNRS), INRIA Bordeaux SW2009 #12;CONTENTS 1 Introduction 1 2 Hyperedge Replacement Grammars 3 2.1 Hypergraphs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.2 Hyperedge Replacement . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 Hyperedge

  16. Fiber type, meal frequency and colonic cytokinetics

    E-Print Network [OSTI]

    Zhang, Jianhu

    1993-01-01T23:59:59.000Z

    The effects of dietary fiber type (cellulose, pectin or oat bran) and meal frequency (gorge or nibble) on colonic short chain fatty acids (SCFAs), in vivo colonic pH and epithelial cell proliferation were examined in male Sprague-Dawley rats...

  17. Graduate Assistant Stipend Enhancement Project Proposal Type

    E-Print Network [OSTI]

    Karonis, Nicholas T.

    1 Graduate Assistant Stipend Enhancement Project Proposal Type The Graduate Assistant Stipend Strategic Plan. Goals The Graduate Assistant Stipend Enhancement project consists of two programs: the Great. Fundamentally, the project seeks to increase the number of graduate students who receive assistantships

  18. Data Management Plan Types of Data

    E-Print Network [OSTI]

    Tam, Tin-Yau

    Data Management Plan Types of Data The research described herein will lead to the discovery of new will be followed by electrochemistry, Raman spectroscopy and optical spectroscopy. All data will be stored electronically in word processing documents. Data Standards All data will be stored in an electronic format

  19. Life without the Terminal Type Lutz Schroder

    E-Print Network [OSTI]

    Schröder, Lutz

    Life without the Terminal Type Lutz Schr¨oder BISS, Department of Computer Science, Bremen University Abstract. We introduce a method of extending arbitrary categories by a terminal object and apply closed except for the lack of a terminal object have a universal full extension to a cartesian closed

  20. Life without the Terminal Type Lutz Schroder

    E-Print Network [OSTI]

    Schröder, Lutz

    Life without the Terminal Type Lutz Schroder BISS, Department of Computer Science, Bremen University Abstract. We introduce a method of extending arbitrary categories by a terminal object and apply closed except for the lack of a terminal object have a universal full extension to a cartesian closed

  1. Models of Type Ia Supernova Explosions

    E-Print Network [OSTI]

    J. C. Niemeyer; M. Reinecke; W. Hillebrandt

    2002-03-21T23:59:59.000Z

    Type Ia supernovae have become an indispensable tool for studying the expansion history of the universe, yet our understanding of the explosion mechanism is still incomplete. We describe the variety of discussed scenarios, sketch the most relevant physics, and report recent advances in multidimensional simulations of Chandrasekhar mass white dwarf explosions.

  2. Models of Type Ia Supernova Explosions

    E-Print Network [OSTI]

    Niemeyer, J C; Hillebrandt, W

    2002-01-01T23:59:59.000Z

    Type Ia supernovae have become an indispensable tool for studying the expansion history of the universe, yet our understanding of the explosion mechanism is still incomplete. We describe the variety of discussed scenarios, sketch the most relevant physics, and report recent advances in multidimensional simulations of Chandrasekhar mass white dwarf explosions.

  3. Deforestation of Functional Programs through Type Inference

    E-Print Network [OSTI]

    Kent, University of

    Deforestation of Functional Programs through Type Inference Olaf Chitil Lehrstuhl f¨ur Informatik II, RWTH Aachen, Germany chitil@informatik.rwth-aachen.de Abstract. Deforestation optimises structures. Short cut deforestation is a deforestation method which is based on a single, local

  4. Submitted to: TYPES 2009 Post-Proceedings

    E-Print Network [OSTI]

    Luo, Zhaohui

    semantics (TOS for short) to prove meta-theoretic properties of type theories, including strong normalisation, Church-Rosser and subject reduction. In this paper, using the TOS approach, we study the meta that for dependent record kinds as found in, e.g., [CPT05]. We shall study the meta-theory by taking the TOS approach

  5. Interannual Variations of Arctic Cloud Types

    E-Print Network [OSTI]

    Hochberg, Michael

    Declining September sea-ice extent #12;Clouds & Changes in Arctic Climate What is the role of cloud cover in Arctic climate change? What is the Cloud Radiative Effect (CRE) in the Arctic? #12;CRE Defined CRE nighttime obs Total cloud cover and nine cloud types: - High cloud (cirriform) - Middle Clouds: Altocumulus

  6. Problem Type Problem Type Description Air Conditioning Air conditioner not working, leaking, etc

    E-Print Network [OSTI]

    Tennessee, University of

    Problem Type Problem Type Description Air Conditioning Air conditioner not working, leaking, etc, Microfridges Doors and Hardware Door repair/replace Lock, latch or hinge repair, key stuck; Lost or stolen key, repair or replace Shades/Blinds Window treatment - repair or replace Washer/Dryer Washer/Dryer repair

  7. Aspen Ecology in the MixedAspen Ecology in the Mixed Conifer TypeConifer Type

    E-Print Network [OSTI]

    Aspen Ecology in the MixedAspen Ecology in the Mixed Conifer TypeConifer Type Wayne D. Shepperd Colorado State University Fort Collins, CO Aspen Ecology in the MixedAspen Ecology in the Mixed Conifer disturbances to meet the desired objective #12;Aspen in Mixed Conifer ForestsAspen in Mixed Conifer Forests

  8. New Type-2 Rule Ranking Indices for Designing Parsimonious Interval Type-2 Fuzzy Logic Systems

    E-Print Network [OSTI]

    Aickelin, Uwe

    rules can be effectively selected to construct parsimonious type-2 fuzzy models while the system processing [7][8], traffic forecasting [9], mobile robot control [10], pattern recognition [11] [12FLS mod- elling. As a matter of fact, even in type-I fuzzy logic system (FLS) modelling, developing

  9. New Type-2 Rule Ranking Indices for Designing Parsimonious Interval Type-2 Fuzzy Logic Systems

    E-Print Network [OSTI]

    Granada, Universidad de

    rules can be effectively selected to construct parsimonious type-2 fuzzy models while the system processing [7][8], traffic forecasting [9], mobile robot control [10], pattern recognition [11FLS mod- elling. As a matter of fact, even in type-1 fuzzy logic system (FLS) modelling, developing

  10. On synchronous robotic networks - Part II: Time complexity of rendezvous and deployment algorithms

    E-Print Network [OSTI]

    Frazzoli, Emilio; Bullo, Francesco; Cortes, Jorge; Martinez, Sonia

    2007-01-01T23:59:59.000Z

    et al. : SYNCHRONOUS ROBOTIC NETWORKS—PART II control andFrazzoli, “On synchronous robotic networks—Part I: Models,et al. : SYNCHRONOUS ROBOTIC NETWORKS—PART II links. ) We

  11. Performance of Charcoal Cookstoves for Haiti Part 1: Results from the Water Boiling Test

    E-Print Network [OSTI]

    Booker, Kayje

    2012-01-01T23:59:59.000Z

    Charcoal Cookstoves for Haiti, Part 1 N N-1 (Sample Size) (of Charcoal Cookstoves for Haiti  Part 1: Results from the of Charcoal Cookstoves for Haiti, Part 1 DISCLAIMER This

  12. Fly ash-enhanced aluminum composites for automotive parts. [Reports for April to June, 1998, and July to September, 1998

    SciTech Connect (OSTI)

    Golden, Dean; Rohatgi, Pradeep

    1998-10-15T23:59:59.000Z

    The objectives of this report are to produce and evaluate the use of aluminum ''ashalloys''--metal matrix composites that incorporate coal fly ash--in the commercial manufacture of cast automotive parts. Some highlights are: (1) Ashalloy ingot with ''C'' type fly ash was synthesized using stir casting techniques similar to the successful castings of ''F'' type fly ash. Agglomeration was noted. Stirring periods were increased up to 45 minutes compared to the normal 5 minutes to determine whether the shear force of stirring would disagglomerate the clusters noted with this type of fly ash. The resulting sample showed clustering. (2) The ashalloy ingots of ''C'' type fly ash were remelted and poured into permanent molds using a cloth filter to screen out clusters. There was no major reduction in clusters of fly ash particles in the composite since the filter with the mesh size larger than 1 x 1 mm was used. The composite melt would not flow through when filters with smaller openings were used. (3) The fly ash sample from Wisconsin Electric Power Company was sent for classification. (4) A 1 lb. sample of JTM-processed fly ash was sent to Wisconsin Electric Power Company for classification and 10 lb. of same fly ash was sent to The Jet Pulverizer Company for jet milling. (5) Experiments on fly ash pretreatment as well as synthesis of ash alloy are continuing. (6) Attempts are being made to apply high speed shear mixing with selected liquids to disperse the clusters noted in ashalloy with the ''C'' type fly ash base. Stir casting processes have been developed to incorporate type ''F'' fly ash of different sizes and measuring tensile data on cast bars. This data enables selection of the optimum size of fly ash to meet specific property requirements. Attempts are underway to develop stir casting techniques to incorporate ''C'' type fly ash in cast aluminum alloys. It is expected that the next milestone for making trial parts will be completed on schedule by June 1999.

  13. Turbulence-Flame Interactions in Type Ia Supernovae

    E-Print Network [OSTI]

    Aspden, Andrew J; Lawrence Berkeley National Laboratory, 1 Cyclotron Road, MS 50A-1148, Berkeley, CA 94720 (Authors 1, 2 & 3); Department of Astronomy and Astrophysics, University of California at Santa Cruz, Santa Cruz, CA 95064 (Author 4); Department of Physics and Astronomy, Stony Brook University, Stony Brook, NY 11794 (Author 5)

    2008-01-01T23:59:59.000Z

    Interactions in Type Ia Supernovae A. J. Aspden 1 , J. B.involved in type Ia supernovae (SN Ia) requires the use of ?generated by RT in type Ia supernovae should obey Bolgiano-

  14. Beryllium anomalies in solar-type field stars

    E-Print Network [OSTI]

    N. C. Santos; G. Israelian; S. Randich; R. J. Garcia Lopez; R. Rebolo

    2004-08-05T23:59:59.000Z

    We present a study of beryllium (Be) abundances in a large sample of field solar-type dwarfs and sub-giants spanning a large range of effective temperatures. The analysis shows that Be is severely depleted for F stars, as expected by the light-element depletion models. However, we also show that Beryllium abundances decrease with decreasing temperature for stars cooler than $\\sim$6000 K, a result that cannot be explained by current theoretical models including rotational mixing, but that is, at least in part, expected from the models that take into account internal wave physics. In particular, the light element abundances of the coolest and youngest stars in our sample suggest that Be, as well as lithium (Li), has already been burned early during their evolution. Furthermore, we find strong evidence for the existence of a Be-gap for solar-temperature stars. The analysis of Li and Be abundances in the sub-giants of our sample also shows the presence of one case that has still detectable amounts of Li, while Be is severely depleted. Finally, we compare the derived Be abundances with Li abundances derived using the same set of stellar parameters. This gives us the possibility to explore the temperatures for which the onset of Li and Be depletion occurs.

  15. Low-hydrogen specs challenge large-part fabricator

    SciTech Connect (OSTI)

    NONE

    1995-06-01T23:59:59.000Z

    Recently, Mark Steel Corp. of Salt Lake City completed a contract to build nine large driver tubes as part of a blast thermal simulator for the US Army. The finished device will be used to test the hardenability of various defense products under simulated nuclear blast forces. To create the shock wave component of the blast, the tubes will be charged with compressed nitrogen, which will be released to create an explosive force eight times that of hurricane Andrew, or equivalent to a 35-megaton bomb. To hold critical low-hydrogen specs while welding the large, complex parts, Mark Steel needed a combination of tight temperature control throughout the process, stringent test procedures, two versions of a new ultralow-hydrogen electrode, and a new ultralow-hydrogen submerged arc flux developed for the job by the Lincoln Electric Co. These specs are discussed here.

  16. PROJECTS FROM FEDERAL REGION IX DEPARTMENT OF ENERGY APPROPRIATE ENERGY TECHNOLOGY PROGRAM PART II

    E-Print Network [OSTI]

    Case, C.W.

    2012-01-01T23:59:59.000Z

    Appropriate Energy Technology Resource Center .IX DOE Appropriate Energy Technology Pilot Program - PartIX DOE Appropriate Energy Technology Pilot Program - Part I;

  17. A thermo-mechanically coupled theory for large deformations of amorphous polymers. Part I: Formulation

    E-Print Network [OSTI]

    Anand, Lallit

    In this Part I, of a two-part paper, we present a detailed continuum-mechanical development of a thermomechanically

  18. ex parte communication between the US DOE, ITI and select ITI...

    Broader source: Energy.gov (indexed) [DOE]

    discuss DOE's Notice of Data Availability (NODA) for battery chargers. DOE Ex Parte Communication25June2014 More Documents & Publications DOE Ex Parte Communication Memorandum Ex...

  19. Energy industries in transition 1985-2000. Part 1

    SciTech Connect (OSTI)

    Weyant, J.P.; Sheffield, D.B. (eds.)

    1984-01-01T23:59:59.000Z

    This conference consisted of 5 plenary sessions and 36 parallel sessions focusing primarily on recent trends in - and future prospects for - the oil, gas, coal, and electric-utility industries. The conference focused on the perspective of private industry. Part 1 consists of 45 papers all of which were selected for the Energy Data Base and Energy Abstracts for Policy Analysis. 5 abstracts appear in Energy Research Abstracts.

  20. Energy industries in transition 1985-2000. Part 2

    SciTech Connect (OSTI)

    Weyant, J.P.; Sheffield, D.B. (eds.)

    1984-01-01T23:59:59.000Z

    This conference consisted of 5 plenary sessions and 36 parallel sessions focusing primarily on recent trends in - and future prospects for - the oil, gas, coal, and electric utility industries. The conference focused on the perspective of private industry. Part 2 consists of 50 papers all of which were selected for the Energy Data Base and Energy Abstracts for Policy Analysis; 5 abstracts appear in Energy Research Abstracts.

  1. Cambrian Agnostida of North America and Greenland, Part I, Ptychagnostidae

    E-Print Network [OSTI]

    Robison, Richard A.

    1984-06-08T23:59:59.000Z

    THE UNIVERSITY OF KANSAS PALEONTOLOGICAL CONTRIBUTIONS June 8, 1984 Paper 109 CAMBRIAN AGNOSTIDA OF NORTH AMERICA AND GREENLAND PART I, PTYCHAGNOSTIDAE' R. A. ROBISON Department of Geology, University of Kansas Lawrence, Kansas 66045 Abstract... D Z 38°-n 2 The University of Kansas Paleontological Contributions—Paper 109 ABUNDANCE, WIDE geographic distribution, and rapid evolution make agnostoid trilobites some of the best indices for global correlation of Cambrian strata. The value...

  2. Sinks of Light Elements in Stars - Part II

    E-Print Network [OSTI]

    Marc H. Pinsonneault; Corinne Charbonnel; Constantine P. Deliyannis

    2000-06-20T23:59:59.000Z

    The fragile light elements lithium, beryllium, and boron are easily destroyed in stellar interiors, and are thus superb probes of physical processes occuring in the outer stellar layers. The light elements are also excellent tracers of the chemical evolution of the Galaxy, and can test big bang nucleosynthesis (BBN). These inter-related topics are reviewed with an emphasis on stellar physics. In Part I (presented by CPD), an overview is given of the physical processes which can modify the surface abundances of the light elements, with emphasis on Population I dwarfs - convection; gravitational settling, thermal diffusion, and radiative levitation; slow mixing induced by gravity waves or rotation. We will discuss the increasingly large body of data which begin to enable us to discern the relative importance of these mechanisms in Population I main sequence stars. In Part II (presented by MHP), discussion is extended to the issue of whether or not the halo Li plateau is depleted, and includes the following topics: Li dispersion in field and globular cluster stars, Li production vs. destruction in Li-rich halo stars, and constraints from 6Li. Also discussed are trends with metal abundance and Teff and implications for chemical evolution and BBN. In Part III (presented by CC), evidence is reviewed that suggests that in situ mixing occurs in evolved low mass Population I and Population II stars. Theoretical mechanisms that can create such mixing are discussed, as well as their implications in stellar yields.

  3. Sinks of Light Elements in Stars - Part III

    E-Print Network [OSTI]

    Corinne Charbonnel; Constantine P. Deliyannis; Marc H. Pinsonneault

    2000-06-20T23:59:59.000Z

    The fragile light elements lithium, beryllium, and boron are easily destroyed in stellar interiors, and are thus superb probes of physical processes occuring in the outer stellar layers. The light elements are also excellent tracers of the chemical evolution of the Galaxy, and can test big bang nucleosynthesis (BBN). These inter-related topics are reviewed with an emphasis on stellar physics. In Part I (presented by CPD), an overview is given of the physical processes which can modify the surface abundances of the light elements, with emphasis on Population I dwarfs - convection; gravitational settling, thermal diffusion, and radiative levitation; slow mixing induced by gravity waves or rotation. We will discuss the increasingly large body of data which begin to enable us to discern the relative importance of these mechanisms in Population I main sequence stars. In Part II (presented by MHP), discussion is extended to the issue of whether or not the halo Li plateau is depleted, and includes the following topics: Li dispersion in field and globular cluster stars, Li production vs. destruction in Li-rich halo stars, and constraints from 6Li. Also discussed are trends with metal abundance and Teff and implications for chemical evolution and BBN. In Part III (presented by CC), evidence is reviewed that suggests that in situ mixing occurs in evolved low mass Population I and Population II stars. Theoretical mechanisms that can create such mixing are discussed, as well as their implications in stellar yields.

  4. Slag Behavior in Gasifiers. Part II: Constitutive Modeling of Slag

    SciTech Connect (OSTI)

    Massoudi, Mehrdad [National Energy Technology Laboratory; Wang, Ping

    2013-02-07T23:59:59.000Z

    The viscosity of slag and the thermal conductivity of ash deposits are among two of the most important constitutive parameters that need to be studied. The accurate formulation or representations of the (transport) properties of coal present a special challenge of modeling efforts in computational fluid dynamics applications. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1,300 °C and 1,500 °C, the viscosity is approximately 25 Pa·s. As the operating temperature decreases, the slag cools and solid crystals begin to form. Since slag behaves as a non-linear fluid, we discuss the constitutive modeling of slag and the important parameters that must be studied. We propose a new constitutive model, where the stress tensor not only has a yield stress part, but it also has a viscous part with a shear rate dependency of the viscosity, along with temperature and concentration dependency, while allowing for the possibility of the normal stress effects. In Part I, we reviewed, identify and discuss the key coal ash properties and the operating conditions impacting slag behavior.

  5. Pollution prevention assessment for a metal parts coater

    SciTech Connect (OSTI)

    Edwards, H.W.; Kostrzewa, M.F.; Spika, T. [Colorado State Univ., Fort Collins, CO (United States). Dept. of Mechanical Engineering; Looby, G.P. [University City Science Center, Philadelphia, PA (United States)

    1995-09-01T23:59:59.000Z

    The US Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. In an effort to assist these manufacturers Waste Minimization Assessment Centers (WMACs) were established at selected universities and procedures were adapted from the EPA Waste Minimization Opportunity Assessment Manual. The WMAC team at Colorado State University performed an assessment at a plant that applies corrosion resistant coatings to metal parts. Aluminum parts received from customers may be anodized or may receive a chromate conversion coating. Brass, copper, steel, and aluminum parts from customers are nickel plated--either by electrolytic or electroless plating. The assessment team`s report, detailing findings and recommendations, indicated that large quantities of wastewater and metal sludge are generated by the plant and that significant cost savings could be achieved through replacement of Freon used for degreasing. This Research Brief was developed by the principal investigators and EPA`s National Risk Management Research Laboratory, Cincinnati, OH, to announce key findings of an ongoing research project that is fully documented in a separate report of the same title available from University City Science Center.

  6. COMPOSITE PARTS llST AUG 18, 1972

    E-Print Network [OSTI]

    Rathbun, Julie A.

    AND MATERIAL GROUP AlSEP RELIABILITY DEPARTMENT rBEND IX AEROSPACE SYSTEMS DIVIS ION ANN ARBOR, MICHIGAN RELIABILITY PROGRAM PLAN FOR ALSEP FLIGHT ARRAY E" paragraph 6. 5. This list of electrical, electronic and fabrication of flight equipment. While the format varies according to the type of documents used as source

  7. Part I: Instrumentation The Chandra X-ray Observatory and

    E-Print Network [OSTI]

    -ray Observatory showing the HRMA, four sci- entific instruments (two types of gratings, HRC, and ACIS) and major://asc.harvard.edu. 2.2 Scientific Instruments 2.2.1 HRMA At energies above 10 eV, photons scatter at incident angles and (usually) prohibitively expensive endeavor. The High Resolution Mirror Assembly (HRMA) gives Chandra

  8. Part I: Instrumentation The Chandra Xray Observatory and

    E-Print Network [OSTI]

    of the Chandra X­ray Observatory showing the HRMA, four sci­ entific instruments (two types of gratings, HRC://asc.harvard.edu. 2.2 Scientific Instruments 2.2.1 HRMA At energies above ¸10 eV, photons scatter at incident angles and (usually) prohibitively expensive endeavor. The High Resolution Mirror Assembly (HRMA) gives Chandra

  9. A Segmented, Enriched N-type Germanium Detector for Neutrinoless...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Publications A Segmented, Enriched N-type Germanium Detector for Neutrinoless Double Beta-Decay Experiments. A Segmented, Enriched N-type Germanium Detector for Neutrinoless...

  10. An automated tool for three types of saturated hydraulic conductivity...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    automated tool for three types of saturated hydraulic conductivity laboratory measurements. An automated tool for three types of saturated hydraulic conductivity laboratory...

  11. A Segmented, Enriched N-type Germanium Detector for Neutrinoless...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Segmented, Enriched N-type Germanium Detector for Neutrinoless Double Beta-Decay Experiments. A Segmented, Enriched N-type Germanium Detector for Neutrinoless Double Beta-Decay...

  12. Hardy–Sobolev Type Inequalities with Sharp Constants in Carnot ...

    E-Print Network [OSTI]

    2010-06-22T23:59:59.000Z

    nonlinear case p = 2. We also obtain a sharp inequality of Hardy–Sobolev type. Keywords Hardy type inequalities·Carnot groups·Carnot–Carathéodory spaces·.

  13. Type B Accident Investigation of the Subcontractor Employee Injuries...

    Broader source: Energy.gov (indexed) [DOE]

    Type B Accident Investigation of the Subcontractor Employee Injuries from a November 15, 2000, Fall Accident at the Oak Ridge National Laboratory Type B Accident Investigation of...

  14. Type B Accident Investigation of the August 22, 2000, Injury...

    Broader source: Energy.gov (indexed) [DOE]

    Type B Accident Investigation of the August 22, 2000, Injury Resulting From Violent Exothermic Chemical Reaction at the Portsmouth Gaseous Diffusion Plant, X-701B Site Type B...

  15. Identification of soybean proteins from a single cell type: The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    soybean proteins from a single cell type: The root hair. Identification of soybean proteins from a single cell type: The root hair. Abstract: Root hairs are a terminally...

  16. Gauge Orbit Types for Generalized Connections

    E-Print Network [OSTI]

    Christian Fleischhack

    2000-01-05T23:59:59.000Z

    Different versions for defining Ashtekar's generalized connections are investigated depending on the chosen smoothness category for the paths and graphs -- the label set for the projective limit. Our definition covers the analytic case as well as the case of webs. Then the orbit types of the generalized connections are determined for compact structure groups. The stabilizer of a connection is homeomorphic to the holonomy centralizer, i.e. the centralizer of its holonomy group, and the homeomorphism class of the gauge orbit is completely determined by the holonomy centralizer. Furthermore, the stabilizers of two connections are conjugate in the gauge group if and only if their holonomy centralizers are conjugate in the structure group. Finally, the gauge orbit type of a connection is defined to be the conjugacy class of its holonomy centralizer equivalently to the standard definition via stabilizers.

  17. Anisotropic criteria for the type of superconductivity

    SciTech Connect (OSTI)

    Kogan, Vladimir G [Ames Laboratory; Prozorov, Ruslan [Ames Laboratory

    2014-08-01T23:59:59.000Z

    The classical criterion for classification of superconductors as type I or type II based on the isotropic Ginzburg-Landau theory is generalized to arbitrary temperatures for materials with anisotropic Fermi surfaces and order parameters. We argue that the relevant quantity for this classification is the ratio of the upper and thermodynamic critical fields Hc2/Hc, rather than the traditional ratio of the penetration depth and the coherence length ?/?. Even in the isotropic case, Hc2/Hc coincides with 2??/? only at the critical temperature Tc and they differ as T decreases, the long-known fact. Anisotropies of Fermi surfaces and order parameters may amplify this difference and render false the criterion based on the value of ?=?/?.

  18. Type-elimination-based reasoning for the description logic SHIQbs using decision diagrams and disjunctive datalog

    E-Print Network [OSTI]

    Rudolph, Sebastian; Hitzler, Pascal

    2012-01-01T23:59:59.000Z

    We propose a novel, type-elimination-based method for reasoning in the description logic SHIQbs including DL-safe rules. To this end, we first establish a knowledge compilation method converting the terminological part of an ALCIb knowledge base into an ordered binary decision diagram (OBDD) which represents a canonical model. This OBDD can in turn be transformed into disjunctive Datalog and merged with the assertional part of the knowledge base in order to perform combined reasoning. In order to leverage our technique for full SHIQbs, we provide a stepwise reduction from SHIQbs to ALCIb that preserves satisfiability and entailment of positive and negative ground facts. The proposed technique is shown to be worst case optimal w.r.t. combined and data complexity and easily admits extensions with ground conjunctive queries.

  19. 2Cosmic Bar Graphs Galaxy Type

    E-Print Network [OSTI]

    in the cluster are spirals? Problem 2 ­ Gamma-ray bursts happen about once each day. The bar graph to the right there are 160 total galaxies, the fraction of spirals is 137/160 = 0.86, or equivalently 86%. Problem 2 ­ Gamma-ray2Cosmic Bar Graphs 0 20 40 60 80 100 S E SB I Galaxy Type Number 0 200 400 600 800 1000 FB SB Burst

  20. Halanay type inequalities on time scales

    E-Print Network [OSTI]

    Ad\\ivar, Murat

    2011-01-01T23:59:59.000Z

    This paper aims to introduce Halanay type inequalities on time scales. By means of these inequalities we derive new global stability conditions for nonlinear dynamic equations on time scales. Giving several examples we show that beside generalization and extension to q-difference case, our results also provide improvements for the existing theory regarding differential and difference inequalites, which are the most important particular cases of dynamic inequalities on time scales.

  1. Nonperturbative Type I-I' String Theory

    E-Print Network [OSTI]

    Shyamoli Chaudhuri

    2005-07-24T23:59:59.000Z

    We propose a nonperturbative framework for the O(32) type I open and closed string theory. The short distance degrees of freedom are bosonic and fermionic hermitian matrices belonging respectively to the adjoint and fundamental representations of the special unitary group SU(N). We identify a closed matrix algebra at finite N which corresponds to the Lorentz, gauge, and supersymmetry algebras of the large N continuum limit. The planar reduction of our matrix theory coincides with the low energy spacetime effective action of the d=10 type I O(32) unoriented open and closed string theory. We show that matrix T-duality transformations can yield a nonperturbative framework for the T-dual type I' closed string theory with 32 D8branes. We show further that under a strong-weak coupling duality transformation the large N reduced action coincides with the low energy spacetime effective action of the d=10 heterotic string, an equivalence at leading order in the inverse string tension and with either gauge group Spin(32)/Z2 or E8xE8. Our matrix formalism has the potential of providing a nonperturbative framework encapsulating all of the weak coupling limits of M theory.

  2. UNDERGRAD FULL-TIME PART-TIME UNDERGRAD FULL-TIME PART-TIME Arts & Social Sciences 4706 1118 15 -19 3910 0

    E-Print Network [OSTI]

    -TIME UNDERGRAD FULL-TIME PART-TIME Year 1 3431 432 Tri-County area 7533 1474 Year 2 3012 406 Rest of Ontario 2929 GRADUATE FULL-TIME PART-TIME GRADUATE FULL-TIME PART-TIME Tri-County area 586 80 Spec & Cert 3 2 Rest

  3. RCRA, superfund and EPCRA hotline training module. Introduction to: Air emission standards (40 cfr parts 264/265, subparts aa, bb, and cc) updated July 1996

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The module provides a regulatory overview of the RCRA air emission standards as they apply to hazardous waste facilities. It outlines the history of RCRA air emission standards as well as the air emission controls required by the standards. It explains the difference in the parts 264/265 and subparts AA, BB and CC, air emission standards. It summarizes the requirements of each of these subparts and identifies the types of units subject to these requirements as well as specific exemptions.

  4. Chemical reaction model for oil and gas generation from type 1 and type 2 kerogen

    SciTech Connect (OSTI)

    Braun, R.L.; Burnham, A.K.

    1993-06-01T23:59:59.000Z

    A global model for the generation of oil and gas from petroleum source rocks is presented. The model consists of 13 chemical species and 10 reactions, including an alternate-pathway mechanism for kerogen pyrolysis. Reaction rate parameters and stoichiometry coefficients determined from a variety of pyrolysis data are given for both type I and type II kerogen. Use of the chemical reaction model is illustrated for typical geologic conditions.

  5. Test and evaluation document for DOT Specification 7A Type A Packaging. Revision 3

    SciTech Connect (OSTI)

    NONE

    1996-01-30T23:59:59.000Z

    The US Department of Energy (DOE) has been conducting, through several of its operating contractors, an evaluation and testing program to qualify Type A radioactive material packagings per US Department of Transportation (DOT) Specification 7A (DOT-7A) of the Code of Federal Regulations (CFR), Title 49, Part 178 (49 CFR 178). The program is currently administered by the DOE, Office of Facility Safety Analysis, DOE/EH-32, at DOE-Headquarters (DOE-HQ) in Germantown, Maryland. This document summarizes the evaluation and testing performed for all of the packagings successfully qualified in this program.

  6. Complete genome sequence of Calditerrivibrio nitroreducens type strain (Yu37-1T)

    SciTech Connect (OSTI)

    Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Sikorski, Johannes [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Zeytun, Ahmet [Los Alamos National Laboratory (LANL); Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Hammon, Nancy [Joint Genome Institute, Walnut Creek, California; Deshpande, Shweta [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Pagani, Ioanna [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Ngatchou, Olivier Duplex [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Spring, Stefan [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Land, Miriam L [ORNL

    2011-01-01T23:59:59.000Z

    Calditerrivibrio nitroreducens Iino et al. 2008 is the type species of the genus Calditerrivibrio. The species is of interest because of its important role in the nitrate cycle as nitrate reducer and for its isolated phylogenetic position in the Tree of Life. Here we describe the features of this organism, together with the complete genome sequence and annotation. This is the third complete genome sequence of a member of the family Deferribacteraceae. The 2,216,552 bp long genome with its 2,128 protein-coding and 50 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  7. Complete genome sequence of Riemerella anatipestifer type strain (BrunerT)

    SciTech Connect (OSTI)

    Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Lu, Megan [Los Alamos National Laboratory (LANL); Misra, Monica [Los Alamos National Laboratory (LANL); Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Hammon, Nancy [Joint Genome Institute, Walnut Creek, California; Deshpande, Shweta [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Pagani, Ioanna [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Gronow, Sabine [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California

    2011-01-01T23:59:59.000Z

    Riemerella anatipestifer (Hendrickson and Hilbert 1932) Segers et al. 1993 is the type species of the genus Riemerella, which belongs to the family Flavobacteriaceae. The species is of interest because of the position of the genus in the phylogenetic tree and because of its role as a pathogen of commercially important avian species worldwide. This is the first completed genome sequence of a member of the genus Riemerella. The 2,155,121 bp long genome with its 2,001 protein-coding and 51 RNA genes consists of one circular chromosome and is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  8. Non-contiguous finished genome sequence of Aminomonas paucivorans type strain (GLU-3T)

    SciTech Connect (OSTI)

    Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Yasawong, Montri [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Held, Brittany [Los Alamos National Laboratory (LANL); Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Copeland, A [U.S. Department of Energy, Joint Genome Institute; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Glavina Del Rio, Tijana [Joint Genome Institute, Walnut Creek, California; Tice, Hope [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Chertkov, Olga [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Ovchinnikova, Galina [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Pukall, Rudiger [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Spring, Stefan [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Sikorski, Johannes [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany

    2010-01-01T23:59:59.000Z

    Aminomonas paucivorans Baena et al. 1999 is the type species of the genus Aminomonas, which belongs to the family Synergistaceae. The species is of interest because it is an asaccharolytic chemoorganotrophic bacterium which ferments quite a number of amino acids. This is the first completed genome sequence (with one gap in a rDNA region) of a member of the genus Aminomonas and the third sequence from the family Synergistaceae. The 2,630,120 bp long genome with its 2,433 protein-coding and 61 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  9. Complete genome sequence of Paludibacter propionicigenes type strain (WB4T)

    SciTech Connect (OSTI)

    Gronow, Sabine [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Munk, Christine [Joint Genome Institute, Walnut Creek, California; Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Hammon, Nancy [Joint Genome Institute, Walnut Creek, California; Deshpande, Shweta [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Mikhailova, Natalia [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany

    2011-01-01T23:59:59.000Z

    Paludibacter propionicigenes Ueki et al. 2006 is the type species of the genus Paludibacter, which belongs to the family Porphyromonadaceae. The species is of interest because of the position it occupies in the tree of life where it can be found in close proximity to members of the genus Dysgonomonas. This is the first completed genome sequence of a member of the genus Paludibacter and the third sequence from the family Porphyromonadaceae. The 3,685,504 bp long genome with its 3,054 protein-coding and 64 RNA genes consists of one circular chromosome and is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  10. Complete genome sequence of Odoribacter splanchnicus type strain (1651/6T)

    SciTech Connect (OSTI)

    Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Gronow, Sabine [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Zeytun, Ahmet [Los Alamos National Laboratory (LANL); Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Hammon, Nancy [Joint Genome Institute, Walnut Creek, California; Deshpande, Shweta [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Pagani, Ioanna [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Ovchinnikova, Galina [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rohde, Christine [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany

    2011-01-01T23:59:59.000Z

    Odoribacter splanchnicus (Werner et al. 1975) Hardham et al. 2008 is the type species of the genus Odoribacter, which belongs to the family Porphyromonadaceae in the order Bacteroidales . The species is of interest because members of the Odoribacter form an isolated cluster within the Porphyromonadaceae. This is the first completed genome sequence of a member of the genus Odoribacter and the fourth sequence from the family Porphyromonadaceae. The 4,392,288 bp long genome with its 3,672 protein-coding and 74 RNA genes and is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  11. Type B investigation report of curium-244 exposure at the ORNL TRU Facility, January 15, 1986

    SciTech Connect (OSTI)

    Love, G.L.; Butler, H.M.; Duncan, D.T.; Oakes, T.W.

    1986-04-01T23:59:59.000Z

    This Type B Investigative Report provides an evaluation of relevant events and activities that led to, were a part of, or resulted from the release of curium-244 in the Building 7920 facility at ORNL in January 1986. Impacts have been evaluated with respect to employee exposures and the costs and loss of productivity resulting from increased bioassay analyses and activities of investigative committees. Management systems evaluated include (1) training of employees performing lab analyses, (2) adherence to procedures, and (3) response to unusual circumstances.

  12. Geology and recognition criteria for uranium deposits of the quartz-pebble conglomerate type. Final report

    SciTech Connect (OSTI)

    Button, A.; Adams, S.S.

    1981-03-01T23:59:59.000Z

    This report is concerned with Precambrian uraniferous conglomerates. This class of deposit has been estimated to contain between approximately 16 and 35 percent of the global uranium reserve in two rather small areas, one in Canada, the other in South Africa. Similar conglomerates, which are often gold-bearing, are, however, rather widespread, being found in parts of most Precambrian shield areas. Data have been synthesized on the geologic habitat and character of this deposit type. The primary objective has been to provide the most relevant geologic observations in a structural fashion to allow resource studies and exploration to focus on the most prospective targets in the shortest possible time.

  13. The Hubble Constant from Type Ia Supernovae in Early-Type Galaxies

    E-Print Network [OSTI]

    Tom Richtler; Georg Drenkhahn

    1999-09-07T23:59:59.000Z

    Type Ia supernovae (SNe) are the best standard candles available today in spite of an appreciable intrinsic variation of their luminosities at maximum phase, and of probably non-uniform progenitors. For an unbiased use of type Ia SNe as distance indicators it is important to know accurately how the decline rate and colour at maximum phase correlate with the peak brightness. In order to calibrate the Hubble diagram of type Ia SNe, i.e. to derive the Hubble constant, one needs to determine the absolute brightness of nearby type Ia SNe. Globular cluster systems of early type Ia host galaxies provide suitable distance indicators. We discuss how Ia SNe can be calibrated and explain the method of Globular Cluster Luminosity Functions (GCLFs). At present, the distance to the Fornax galaxy cluster is most important for deriving the Hubble constant. Our present data indicate a Hubble constant of H_0=72+-4 km/s/Mpc. As an appendix, we summarise what is known about absolute magnitudes of Ia's in late-type galaxies.

  14. Complete genome sequence of Truepera radiovictrix type strain (RQ-24T)

    SciTech Connect (OSTI)

    Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Rohde, Christine [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Munk, Christine [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Glavina Del Rio, Tijana [Joint Genome Institute, Walnut Creek, California; Tice, Hope [Joint Genome Institute, Walnut Creek, California; Deshpande, Shweta [Joint Genome Institute, Walnut Creek, California; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Han, Cliff [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Liolios, Konstantinos [Joint Genome Institute, Walnut Creek, California; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Land, Miriam L [ORNL; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Tindall, Brian [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California

    2011-01-01T23:59:59.000Z

    Truepera radiovictrix Albuquerque et al. 2005 is the type species of the genus Truepera within the phylum Deinococcus/Thermus. T. radiovictrix is of special interest not only because of its isolated phylogenetic location in the order Deinococcales, but also because of its ability to grow under multiple extreme conditions in alkaline, moderately saline, and high temperature habitats. Of particular interest is the fact that, T. radiovictrix is also remarkably resistant to ionizing radiation, a feature it shares with members of the genus Deinococcus. This is the first completed genome sequence of a member of the family Trueperaceae and the fourth type strain genome sequence from a member of the order Deinococcales. The 3,260,398 bp long genome with its 2,994 protein-coding and 52 RNA genes consists of one circular chromosome and is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  15. Complete genome sequence of Desulfarculus baarsii type strain (2st14T)

    SciTech Connect (OSTI)

    Sun, Christine [University of California, Berkeley; Spring, Stefan [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Lapidus, Alla L. [Joint Genome Institute, Walnut Creek, California; Davenport, Karen W. [Los Alamos National Laboratory (LANL); Glavina Del Rio, Tijana [Joint Genome Institute, Walnut Creek, California; Tice, Hope [Joint Genome Institute, Walnut Creek, California; Nolan, Matt [Joint Genome Institute, Walnut Creek, California; Copeland, A [U.S. Department of Energy, Joint Genome Institute; Cheng, Jan-Fang [Joint Genome Institute, Walnut Creek, California; Lucas, Susan [Joint Genome Institute, Walnut Creek, California; Tapia, Roxanne [Los Alamos National Laboratory (LANL); Goodwin, Lynne A. [Los Alamos National Laboratory (LANL); Pitluck, Sam [Joint Genome Institute, Walnut Creek, California; Ivanova, N [U.S. Department of Energy, Joint Genome Institute; Pagani, Ioanna [Joint Genome Institute, Walnut Creek, California; Mavromatis, K [U.S. Department of Energy, Joint Genome Institute; Ovchinnikova, Galina [U.S. Department of Energy, Joint Genome Institute; Pati, Amrita [U.S. Department of Energy, Joint Genome Institute; Chen, Amy [Joint Genome Institute, Walnut Creek, California; Palaniappan, Krishna [Joint Genome Institute, Walnut Creek, California; Hauser, Loren John [ORNL; Chang, Yun-Juan [ORNL; Jeffries, Cynthia [Oak Ridge National Laboratory (ORNL); Detter, J. Chris [Joint Genome Institute, Walnut Creek, California; Han, Cliff [Los Alamos National Laboratory (LANL); Rohde, Manfred [HZI - Helmholtz Centre for Infection Research, Braunschweig, Germany; Brambilla, Evelyne-Marie [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Goker, Markus [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Woyke, Tanja [Joint Genome Institute, Walnut Creek, California; Bristow, James [Joint Genome Institute, Walnut Creek, California; Eisen, Jonathan [Joint Genome Institute, Walnut Creek, California; Markowitz, Victor [Joint Genome Institute, Walnut Creek, California; Hugenholtz, Philip [U.S. Department of Energy, Joint Genome Institute; Kyrpides, Nikos C [Joint Genome Institute, Walnut Creek, California; Klenk, Hans-Peter [DSMZ - German Collection of Microorganisms and Cell Cultures GmbH, Braunschweig, Germany; Land, Miriam L [ORNL

    2010-01-01T23:59:59.000Z

    Desulfarculus baarsii (Widdel 1981) Kuever et al. 2006 is the type and only species of the genus Desulfarculus, which represents the family Desulfarculaceae and the order Desulfarculales. This species is a mesophilic sulfate-reducing bacterium with the capability to oxidize acetate and fatty acids of up to 18 carbon atoms completely to CO2. The acetyl-CoA/CODH (Wood-Ljungdahl) pathway is used by this species for the complete oxidation of carbon sources and autotrophic growth on formate. The type strain 2st14T was isolated from a ditch sediment collected near the University of Konstanz, Germany. This is the first completed genome sequence of a member of the order Desulfarculales. The 3,655,731 bp long single replicon genome with its 3,303 protein-coding and 52 RNA genes is a part of the Genomic Encyclopedia of Bacteria and Archaea project.

  16. RADIAL VELOCITIES OF GALACTIC O-TYPE STARS. II. SINGLE-LINED SPECTROSCOPIC BINARIES

    SciTech Connect (OSTI)

    Williams, S. J.; Gies, D. R. [Center for High Angular Resolution Astronomy and Department of Physics and Astronomy, Georgia State University, P.O. Box 4106, Atlanta, GA 30302-4106 (United States); Hillwig, T. C. [Department of Physics and Astronomy, Valparaiso University, Valparaiso, IN 46383 (United States); McSwain, M. V. [Department of Physics, Lehigh University, 16 Memorial Drive East, Bethlehem, PA 18015 (United States); Huang, W., E-mail: swilliams@chara.gsu.edu, E-mail: gies@chara.gsu.edu, E-mail: todd.hillwig@valpo.edu, E-mail: mcswain@lehigh.edu, E-mail: hwenjin@astro.washington.edu [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195-1580 (United States)

    2013-02-01T23:59:59.000Z

    We report on new radial velocity measurements of massive stars that are either suspected binaries or lacking prior observations. This is part of a survey to identify and characterize spectroscopic binaries among O-type stars with the goal of comparing the binary fraction of field and runaway stars with those in clusters and associations. We present orbits for HDE 308813, HD 152147, HD 164536, BD-16 Degree-Sign 4826, and HDE 229232, Galactic O-type stars exhibiting single-lined spectroscopic variation. By fitting model spectra to our observed spectra, we obtain estimates for effective temperature, surface gravity, and rotational velocity. We compute orbital periods and velocity semiamplitudes for each system and note the lack of photometric variation for any system. These binaries probably appear single-lined because the companions are faint and because their orbital Doppler shifts are small compared to the width of the rotationally broadened lines of the primary.

  17. Radial Velocities of Galactic O-Type Stars. II. Single-lined Spectroscopic Binaries

    E-Print Network [OSTI]

    Williams, S J; Hillwig, T C; McSwain, M V; Huang, W

    2012-01-01T23:59:59.000Z

    We report on new radial velocity measurements of massive stars that are either suspected binaries or lacking prior observations. This is part of a survey to identify and characterize spectroscopic binaries among O-type stars with the goal of comparing the binary fraction of field and runaway stars with those in clusters and associations. We present orbits for HDE 308813, HD 152147, HD 164536, BD-16 4826 and HDE 229232, Galactic O-type stars exhibiting single-lined spectroscopic variation. By fitting model spectra to our observed spectra we obtain estimates for effective temperature, surface gravity, and rotational velocity. We compute orbital periods and velocity semiamplitudes for each system and note the lack of photometric variation for any system. These binaries probably appear single-lined because the companions are faint and because their orbital Doppler shifts are small compared to the width of the rotationally broadened lines of the primary.

  18. Nuclear facility decommissioning and site remedial actions: A selected bibliography, Vol. 18. Part 2. Indexes

    SciTech Connect (OSTI)

    NONE

    1997-09-01T23:59:59.000Z

    This bibliography contains 3638 citations with abstracts of documents relevant to environmental restoration, nuclear facility decontamination and decommissioning (D&D), uranium mill tailings management, and site remedial actions. This report is the eighteenth in a series of bibliographies prepared annually for the U.S. Department of Energy (DOE) Office of Environmental Restoration. Citations to foreign and domestic literature of all types - technical reports, progress reports, journal articles, symposia proceedings, theses, books, patents, legislation, and research project descriptions - have been included in Part 1 of the report. The bibliography contains scientific, technical, financial, and regulatory information that pertains to DOE environmental restoration programs. The citations are separated by topic into 16 sections, including (1) DOE Environmental Restoration Program; (2) DOE D&D Program; (3) Nuclear Facilities Decommissioning; (4) DOE Formerly Utilized Sites Remedial Action Programs; (5) NORM-Contaminated Site Restoration; (6) DOE Uranium Mill Tailings Remedial Action Project; (7) Uranium Mill Tailings Management; (8) DOE Site-Wide Remedial Actions; (9) DOE Onsite Remedial Action Projects; (10) Contaminated Site Remedial Actions; (11) DOE Underground Storage Tank Remediation; (12) DOE Technology Development, Demonstration, and Evaluations; (13) Soil Remediation; (14) Groundwater Remediation; (15) Environmental Measurements, Analysis, and Decision-Making; and (16) Environmental Management Issues. Within the 16 sections, the citations are sorted by geographic location. If a geographic location is not specified, the citations are sorted according to the document title. In Part 2 of the report, indexes are provided for author, author affiliation, selected title phrase, selected title word, publication description, geographic location, and keyword.

  19. Type Policy Title Here Effective Date: [Insert Date

    E-Print Network [OSTI]

    Salzman, Daniel

    Type Policy Title Here Effective Date: [Insert Date] Policy Statement [Type Statement Text Here] Reason(s) for the Policy [Type Reason Text Here] Primary Guidance to Which This Policy Responds [Type Primary Policy Here ­ If there is NOT a Primary Policy indicate that] Responsible University Office

  20. A micromechanical approach to modeling partly saturated soils

    E-Print Network [OSTI]

    Lamborn, Mark Jackson

    1986-01-01T23:59:59.000Z

    . Values for these dimensi onless quanti ti es are not available at present. Approxi mat1 ons for the loads transmi tted by indi vidual part1cles are gi ven. ACKNOWLEOGEMENTS I would like to thank Dr. D. H. Allen, Dr. R. L. Lytton, and Dr. R. A... Values of the Degree of Saturation, Ds, I3 and the Angle, zm, for the Case of the Mixture Phase Acting as a Binder 139 Table 3. 4. Initial Volume Tractions and Maximum Tensile Stressed Volume of the Mixture Phase for the Different Packing...