Sample records for tungsten mountain area

  1. Tungsten Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlin Baxin HydropowerTrinity Thermal Systems JumpTrueTullahomaTungsten

  2. Tungsten Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown of Ladoga, Indiana (UtilityTri-StateTucson Estates,Tumwater, Washington:

  3. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Thermal Gradient Holes Activity...

  4. Direct-Current Resistivity Survey At Blue Mountain Area (Fairbank...

    Open Energy Info (EERE)

    Blue Mountain Area (Fairbank Engineering Ltd, 2005) Exploration Activity Details Location Blue Mountain Area Exploration Technique Direct-Current Resistivity Survey Activity Date...

  5. Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Home Exploration Activity: Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area...

  6. Aerial Photography At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Exploration Activity: Aerial Photography At Blue Mountain Geothermal Area (Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area...

  7. Modeling-Computer Simulations At White Mountains Area (Goff ...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At White Mountains Area (Goff & Decker, 1983) Exploration Activity...

  8. Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Well Log Data At Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) Exploration Activity Details...

  9. Conceptual Model At Blue Mountain Geothermal Area (Faulds & Melosh...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Conceptual Model At Blue Mountain Geothermal Area (Faulds & Melosh, 2008) Exploration Activity Details Location...

  10. Exploratory Boreholes At Blue Mountain Geothermal Area (Parr...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Exploratory Boreholes At Blue Mountain Geothermal Area (Parr & Percival, 1991) Exploration Activity Details Location...

  11. Time-Domain Electromagnetics At Glass Mountain Area (Cumming...

    Open Energy Info (EERE)

    GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Time-Domain Electromagnetics At Glass Mountain Area (Cumming And Mackie, 2007) Exploration Activity Details Location Glass...

  12. Modeling-Computer Simulations At Chocolate Mountains Area (Alm...

    Open Energy Info (EERE)

    navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Modeling-Computer Simulations At Chocolate Mountains Area (Alm, Et Al., 2010) Exploration Activity...

  13. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Ross...

    Open Energy Info (EERE)

    GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Ross, Et Al., 1999) Exploration Activity Details Location...

  14. Hyperspectral Imaging At Blue Mountain Geothermal Area (Calvin...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Hyperspectral Imaging At Blue Mountain Geothermal Area (Calvin, Et Al., 2010) Exploration Activity Details Location...

  15. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank & Ross, 1999) Exploration Activity Details Location...

  16. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Dipole-Dipole Resistivity At Blue Mountain Geothermal Area...

  17. Static Temperature Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Static Temperature Survey At Blue Mountain Geothermal Area...

  18. Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Fairbank Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank...

  19. Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    Fairbank Engineering Ltd, 2003) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Ground Gravity Survey Activity Date Usefulness not...

  20. Field Mapping At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Engineering Ltd, 2003) Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Field Mapping At Blue Mountain Geothermal Area (Fairbank Engineering Ltd,...

  1. Flow Test At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    Activity Details Location Blue Mountain Geothermal Area Exploration Technique Flow Test Activity Date 2002 - 2002 Usefulness not useful DOE-funding Unknown Exploration Basis...

  2. Climate Change in Mountain Ecosystems Areas of Current Research

    E-Print Network [OSTI]

    Climate Change in Mountain Ecosystems Areas of Current Research · Glacier Research · Snow Initiative Glacier Research A Focus on Mountain Ecosystems Climate change is widely acknowledged to be having in the western U.S. and the Northern Rockies in particular are highly sensitive to climate change. In fact

  3. Ground Gravity Survey At Blue Mountain Geothermal Area (U.S....

    Open Energy Info (EERE)

    Ground Gravity Survey At Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique...

  4. Ground Magnetics At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Ground Magnetics Activity...

  5. Core Analysis At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    Blue Mountain Geothermal Area (U.S. Geological Survey, 2009) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique Core Analysis Activity Date...

  6. Aeromagnetic Survey At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    Aeromagnetic Survey At Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details Location Blue Mountain Geothermal Area Exploration Technique...

  7. Pennsylvanian and Permian Fusulinids of the Ferguson Mountain Area

    E-Print Network [OSTI]

    Seamons, Kent E.

    SLADE Humble Oil Company, Salt Lake City, Utah ABSTRACT.--Thestratigraphic section at Ferguson Mountain. The area is accessible via U. S. Highway 50, south- west from Wendover. The base and top of the measured

  8. Geophysical Setting of the Blue Mountain Geothermal Area, North...

    Open Energy Info (EERE)

    Setting of the Blue Mountain Geothermal Area, North-Central Nevada and Its Relationship to a Crustal-Scale Fracture Associated with the Inception of the Yellowstone Hotspot Jump...

  9. Geology of the Cedar Mountain area, Llano County, Texas

    E-Print Network [OSTI]

    Dewitt, Gary Ray

    1966-01-01T23:59:59.000Z

    Mountain area. A part of Cedar Mountain was mapped by Barnes (1956) while studying the lead resources of central Texas. The report also in- cludes a brief discussion of buried topography and the genesis of the Hickory Sandstone. Absolute age... massif, In a later report (1848) he described a Carboniferous lime- stone having abundant black "silex" (possibly Marble Falls Limestone), and widespread "Silurian limestones, " Shumard (1861) described rocks of the "Primordial Zone" of Tex...

  10. Chocolate Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, click here.TelluricPower International New EnergyChippewaChocolate Mountains

  11. Jemez Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf Kilauea Volcano, Hawaii | Wind FarmJefferson City,Jemez Mountain

  12. Interagency Visitor Center at Santa Monica Mountains National Recreation Area

    High Performance Buildings Database

    Calabasas, CA This project was to develop the first visitor center for the Santa Monica Mountains National Recreation Area located in the Los Angeles, California area. The previous visitor center was across from a shopping mall in rental space at park headquarters in Thousand Oaks. The new facility is centrally located in the park at a much more appropriate natural and cultural resource setting. It is a partnership project with the Mountains Recreation and Conservation Authority, which is a local land conservation and park agency. It is also a joint facility with California State Parks.

  13. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass ConversionsSouthby 2022 |BleckleyMotion Energy Jump to: navigation,Area Jump

  14. Blue Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass ConversionsSouthby 2022 |BleckleyMotion Energy Jump to: navigation,Area

  15. Thermal And-Or Near Infrared At Socorro Mountain Area (Owens...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Thermal And-Or Near Infrared At Socorro Mountain Area (Owens, Et Al., 2005) Exploration Activity Details Location...

  16. Rock Sampling At Blue Mountain Geothermal Area (U.S. Geological...

    Open Energy Info (EERE)

    search GEOTHERMAL ENERGYGeothermal Home Exploration Activity: Rock Sampling At Blue Mountain Geothermal Area (U.S. Geological Survey, 2012) Exploration Activity Details...

  17. Glacier volume and area change by 2050 in high mountain Asia Liyun Zhao a

    E-Print Network [OSTI]

    Moore, John

    Glacier volume and area change by 2050 in high mountain Asia Liyun Zhao a , Ran Ding a , John C change by 2050 of all 67,028 glaciers, with a total area of 122,969 km2 , delineated in the Randolph Glacier Inventory 2.0 of high mountain Asia (HMA). We used the 25 km resolution regional climate model Reg

  18. Geothermal resource assessment of the Yucca Mountain Area, Nye County, Nevada. Final report

    SciTech Connect (OSTI)

    Flynn, T.; Buchanan, P.; Trexler, D. [Nevada Univ., Las Vegas, NV (United States). Harry Reid Center for Environmental Studies, Division of Earth Sciences; Shevenell, L., Garside, L. [Nevada Univ., Reno, NV (United States). Mackay School of Mines, Nevada Bureau of Mines and Geology

    1995-12-01T23:59:59.000Z

    An assessment of the geothermal resources within a fifty-mile radius of the Yucca Mountain Project area was conducted to determine the potential for commercial development. The assessment includes collection, evaluation, and quantification of existing geological, geochemical, hydrological, and geophysical data within the Yucca Mountain area as they pertain to geothermal phenomena. Selected geologic, geochemical, and geophysical data were reduced to a set of common-scale digital maps using Geographic Information Systems (GIS) for systematic analysis and evaluation. Available data from the Yucca Mountain area were compared to similar data from developed and undeveloped geothermal areas in other parts of the Great Basin to assess the resource potential for future geothermal development at Yucca Mountain. This information will be used in the Yucca Mountain Site Characterization Project to determine the potential suitability of the site as a permanent underground repository for high-level nuclear waste.

  19. 20th-century variations in area of cirque glaciers and glacierets, Rocky Mountain National Park, Rocky Mountains,

    E-Print Network [OSTI]

    Fountain, Andrew G.

    20th-century variations in area of cirque glaciers and glacierets, Rocky Mountain National Park maps and aerial and ground-based photographs for the small cirque glaciers and glacierets of Rockyth century. The glaciers retreated through the first half of the 20th century, advanced slightly from

  20. 2-M Probe At Tungsten Mountain Area (Kratt, Et Al., 2008) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit withTianlinPapersWindey Wind HometcdbInformation Teels MarshInformation

  1. 2-M Probe At Tungsten Mountain Area (Shevenell, Et Al., 2008) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1 Wind ProjectsourceInformation 2-M Probe AtInformation

  2. Thermal Gradient Holes At Tungsten Mountain Area (Kratt, Et Al., 2008) |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <MaintainedInformationThe year openEnergy2003)Energy|2008) |

  3. Thermal Gradient Holes At Tungsten Mountain Area (Shevenell, Et Al., 2008)

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f <MaintainedInformationThe year openEnergy2003)Energy|2008) || Open

  4. SUSTAINABLE DEVELOPMENT AND FORESTRY RESOURCES ADMINISTRATION IN THE APUSENI MOUNTAINS AREA

    E-Print Network [OSTI]

    SUSTAINABLE DEVELOPMENT AND FORESTRY RESOURCES ADMINISTRATION IN THE APUSENI MOUNTAINS AREA and despite the sustainable development principles, the Romanian forestry environment has suffered a real is taken into account (Giddens, 2000). 1.1. Forestry resources administration The main problem in terms

  5. An inventory of glacier changes between 1973 and 2011 for the Geladandong Mountain area, China.

    E-Print Network [OSTI]

    Zhang, J.; Braaten, David A.; Li, X.; Tao, F.

    2013-02-12T23:59:59.000Z

    The snow and ice of the Geladangong Mountain area supply the headwaters of the Yangtze River, and long-term changes to glaciers and ice masses in this region due to a warming climate are of great concern. An inventory of glacier boundaries...

  6. Geology of the Smoothingiron Mountain-North area, Llano and San Saba counties, Texas 

    E-Print Network [OSTI]

    Greenwood, Bobby Marcum

    1963-01-01T23:59:59.000Z

    Sohls't and was intruded late ite abridge (1937, p. 233-237) correlated ths Upper C~n sse bien of the Uyyer MLssissippi V~ with that, of Tomas~ and neet snk defined tbe Zd. on Mountain Sandstens ~r of the Csp Mountain yorme- SrLkge and. Cire (1937, p... in north-central Tomas~ but tbe units he proposed are difficult to distinguish in the L1ano area? Chondr snd Goes (19/2~ p. 2237-226$) descrLbek the structure of central an4 north central Tomas& giving new srLdsnce for ths structural smms feunk...

  7. Mercury Vapor At Socorro Mountain Area (Kooten, 1987) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville, Ohio:Menomonee Falls,Mccoy Geothermal AreaInformation Socorro

  8. A revised Litostragraphic Framework for the Southern Yucca Mountain Area, Nye County, Nevada

    SciTech Connect (OSTI)

    R.W. Spengler; F.M. Byers; R.P. Dickerson

    2006-03-24T23:59:59.000Z

    An informal, revised lithostratigraphic framework for the southern Yucca Mountain area, Nevada has been developed to accommodate new information derived from subsurface investigations of the Nye County Early Warning Drilling Program. Lithologies penetrated by recently drilled boreholes at locations between Stagecoach Road and Highway 95 in southern Nye County include Quaternary and Pliocene alluvium and alluvial breccia, Miocene pyroclastic flow deposits and intercalated lacustrine siltstone and claystone sequences, early Miocene to Oligocene pre-volcanic sedimentary rocks, and Paleozoic strata. Of the 37 boreholes currently drilled, 21 boreholes have sufficient depth, spatial distribution, or traceable pyroclastic flow, pyroclastic fall, and reworked tuff deposits to aid in the lateral correlation of lithostrata. Medial and distal parts of regional pyroclastic flow deposits of Miocene age can be correlated with the Timber Mountain, Paintbrush, Crater Flat, and Tram Ridge Groups. Rocks intercalated between these regional pyroclastic flow deposits are substantially thicker than in the central part of Yucca Mountain, particularly near the downthrown side of major faults and along the southern extent of exposures at Yucca Mountain.

  9. Rocky Mountain area petroleum product availability with reduced PADD IV refining capacity

    SciTech Connect (OSTI)

    Hadder, G.R.; Chin, S.M.

    1994-02-01T23:59:59.000Z

    Studies of Rocky Mountain area petroleum product availability with reduced refining capacity in Petroleum Administration for Defense IV (PADD IV, part of the Rocky Mountain area) have been performed with the Oak Ridge National Laboratory Refinery Yield Model, a linear program which has been updated to blend gasolines to satisfy constraints on emissions of nitrogen oxides and winter toxic air pollutants. The studies do not predict refinery closures in PADD IV. Rather, the reduced refining capacities provide an analytical framework for probing the flexibility of petroleum refining and distribution for winter demand conditions in the year 2000. Industry analysts have estimated that, for worst case scenarios, 20 to 35 percent of PADD IV refining capacity could be shut-down as a result of clean air and energy tax legislation. Given these industry projections, the study scenarios provide the following conclusions: The Rocky Mountain area petroleum system would have the capability to satisfy winter product demand with PADD IV refinery capacity shut-downs in the middle of the range of industry projections, but not in the high end of the range of projections. PADD IV crude oil production can be maintained by re-routing crude released from PADD IV refinery demands to satisfy increased crude oil demands in PADDs II (Midwest), III (Gulf Coast), and Washington. Clean Air Act product quality regulations generally do not increase the difficulty of satisfying emissions reduction constraints in the scenarios.

  10. The Effects of Site Characterization Activities on the Abundance of Ravens (Corvus corax) in the Yucca Mountain Area

    SciTech Connect (OSTI)

    P.E. Lederle

    1998-05-08T23:59:59.000Z

    In response to the Nuclear Waste Policy Act of 1982 and the Nuclear Waste Policy Amendments Act of 1987, the U.S. Department of Energy (DOE) developed and is implementing the Yucca Mountain Site Characterization Project. Raven abundance was measured from August 1991 through August 1995 along treatment and control routes to evaluate whether site characterization activities resulted in increased raven abundance at Yucca Mountain. This study fulfills the requirement set forth in the incidental take provisions of the Biological Opinion that DOE monitor the abundance of ravens at Yucca Mountain. Ravens were more abundant at Yucca Mountain than in the control area, and raven abundance in both areas increased over time. However, the magnitude of differences between Yucca Mountain and control surveys did not change over time, indicating that the increase in raven abundance observed during this study was not related to site characterization activities. Increases over time on both Yucca Mountain and control routes are consistent with increases in raven abundance in the Mojave Desert reported by the annual Breeding Bird Survey of the US. Fish and Wildlife Service. Evidence from the Desert Tortoise Monitoring Program at Yucca Mountain suggests that ravens are not a significant predator of small tortoises in this locale. Carcasses of small tortoises (less than 110 mm in length) collected during the study showed little evidence of raven predation, and 59 radiomarked hatchlings that were monitored on a regular basis were not preyed upon by ravens. Overall, no direct evidence of raven predation on tortoises was observed during this study. Small tortoises are probably encountered so infrequently by ravens that they are rarely exploited as a food source. This is likely due to the relatively low abundance of both desert tortoises and ravens in the Yucca Mountain area.

  11. Evaluation of the hot-dry-rock geothermal potential of an area near Mountain Home, Idaho

    SciTech Connect (OSTI)

    Arney, B.H.; Goff, F.

    1982-05-01T23:59:59.000Z

    Evaluation of an area near Mountain Home, Idaho, was performed to assess the hot dry rock (HDR) potential of the prospect. The techniques reported include telluric and gravity profiling, passive seismic, hydrology and water chemistry surveys, and lineament analysis. Gravity and telluric surveys were unsuccessful in locating fractures buried beneath recent volcanics and sediments of the plain because density and conductivity contrasts were insufficient. Gravity modeling indicated areas where granite was not likely to be within drilling depth, and telluric profiling revealed an area in the northwest part of the prospect where higher conductivity suggested the presence of fractures or water or both, thereby making it unsuitable for HDR. Water geochemistry indicated that (hot water) reservoir temperatures do not exceed 100/sup 0/C. An area in the east central part of the prospect was delineated as most favorable for HDR development. Temperature is expected to be 200/sup 0/C at 3-km depth, and granitic rock of the Idaho Batholith should be intersected at 2- to 3-km depth.

  12. Spatial variability of recent glacier area changes in the Tien Shan Mountains, Central Asia, using Corona (~1970), Landsat (~2000), and ALOS (~2007) satellite data

    E-Print Network [OSTI]

    Kääb, Andreas

    Spatial variability of recent glacier area changes in the Tien Shan Mountains, Central Asia, using 6 March 2008 Accepted 19 August 2009 Available online xxxx Keywords: glacier area changes regional differences water shortages glacier hazards ALOS Landsat Corona Tien Shan Mountains Central Asia Geographic

  13. Characterization of photochemical pollution at different elevations in mountainous areas in Hong Kong

    E-Print Network [OSTI]

    2013-01-01T23:59:59.000Z

    mountainous terrain Part 2: mesoscale effects, Agr. ForestMany studies showed that mesoscale circulations like sea–when evidence for the mesoscale circulation was clear based

  14. THE As-QUENCHED MICROSTRUCTURE AND TEMPERING BEHAVIOR OF RAPIDLY SOLIDIFIED TUNGSTEN STEELS

    E-Print Network [OSTI]

    Rayment, J.J.

    2014-01-01T23:59:59.000Z

    of six ternary iron-tungsten-carbon alloys and commercialFeWCS-6 (20 and 23wt% tungsten) only the cellular micro-microstructure of the higher tungsten alloys. Selected area

  15. Analysis of water-level data in the Yucca Mountain area, Nevada, 1985--95

    SciTech Connect (OSTI)

    Graves, R.P.; Tucci, P.; O`Brien, G.M.

    1997-12-31T23:59:59.000Z

    From 1985 through 1995, a water-level network that consists of 28 wells for monitoring 36 depth intervals has been maintained in the Yucca Mountain area. The network includes wells that were measured manually, approximately monthly, and/or measured hourly with a transducer/data logger system. Manual water-level measurements were made with either calibrated steel tapes or single or multiconductor-cable units. All wells monitor water levels in Tertiary volcanic rocks, except one that monitors water levels in Paleozoic carbonate rocks. Annual mean water-level altitudes for all wells for the period 1985-95 ranged from 727.93 to 1,034.60 meters. The maximum range in water-level change between monthly measurements and/or monthly mean values was 12.22 meters in well USW H-3 lower interval, and the minimum range was 0.31 meter in wells UE-25 b-1 upper interval, and J-11. In 31 of the 36 depth intervals monitored, the range of water-level change was less than 1 meter. The range of standard deviation of all depth interval measurements for all wells that were monitored was 0.053 to 3.098 meters. No seasonal water-level trends were detected in any of the wells, and regional ground-water withdrawals did not appear to cause water-level changes. Most annual water-level fluctuations can be attributed to barometric and Earth-tide changes. Regional earthquakes, which occurred on June 28--29, 1992, might have simultaneously affected the water level in seven wells. Periods of rising and declining water levels were observed in most wells. However, 11 years of record were not sufficient to determine if these periods were cyclic. Because a goal of monitoring water levels at Yucca Mountain is to determine if there are water-level trends that could affect the potential repository, observed water-level changes over the period of this report may not be representative of the overall long-term trends in water levels.

  16. Exhumation History of the Alam Kuh Area, Central Alborz Mountains, Northern Iran: Implications for Caspian subsidence and Collision-Related Tectonics

    E-Print Network [OSTI]

    California at Los Angeles, University of

    Exhumation History of the Alam Kuh Area, Central Alborz Mountains, Northern Iran: Implications, University of Tehran, Iran Abstract. Crystallization and thermal histories of two plutons in the northwestern Alborz (also Elburz, Elburs) Mountains, northern Iran were obtained by U/Pb, 40 Ar/39 Ar, and (U

  17. Environmental assessment: Yucca Mountain site, Nevada research and development area, Nevada; Volume 3

    SciTech Connect (OSTI)

    NONE

    1986-05-01T23:59:59.000Z

    In February 1983, the US Department of Energy (DOE) identified the Yucca Mountain site in Nevada as one of nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. The site is in the Great Basin, which is one of five distinct geohydrologic settings considered for the first repository. To determine their suitability, the Yucca Mountain site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE`s General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. On the basis of the evaluations reported in this EA, the DOE has found that the Yucca Mountain site is not disqualified under the guidelines. The DOE has also found that it is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Yucca Mountain site as one of five sites suitable for characterization.

  18. Environmental assessment: Yucca Mountain site, Nevada research and development area, Nevada; Volume 1

    SciTech Connect (OSTI)

    NONE

    1986-05-01T23:59:59.000Z

    In February 1983, the US Department of Energy (DOE) identified the Yucca Mountain site in Nevada as one of nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high- level radioactive waste. The site is in the Great Basin, which is one of five distinct geohydrologic settings considered for the first repository. To determine their suitability, the Yucca Mountain site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE`s General Guideline for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EA), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. On the basis of the evaluations reported in this EA, the DOE found that the Yucca Mountain site is not disqualified under the guidelines. The DOE has also found that it is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Yucca Mountain site as of five sites suitable for characterization.

  19. Environmental assessment: Yucca Mountain Site, Nevada Research and Development Area, Nevada; Volume 2

    SciTech Connect (OSTI)

    NONE

    1986-05-01T23:59:59.000Z

    In February 1983, the US Department of Energy (DOE) identified the Yucca Mountain site in Nevada as one of nine potentially acceptable sites for a mined geologic repository for spent nuclear fuel and high-level radioactive waste. The site is in the Great Basin, which is one of five distinct geohydrologic settings considered for the first repository. To determine their suitability, the Yucca Mountain site and the eight other potentially acceptable sites have been evaluated in accordance with the DOE`s General Guidelines for the Recommendation of Sites for the Nuclear Waste Repositories. These evaluations were reported in draft environmental assessments (EAs), which were issued for public review and comment. After considering the comments received on the draft EAs, the DOE prepared the final EAs. On the basis of the evaluations reported in this EA, the DOE has found that the Yucca Mountain site is not disqualified under the guidelines. The DOE has also found that is is suitable for site characterization because the evidence does not support a conclusion that the site will not be able to meet each of the qualifying conditions specified in the guidelines. On the basis of these findings, the DOE is nominating the Yucca Mountain site as one of five sites suitable for characterization.

  20. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 9, Index

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules.

  1. Hydrogeochemical and stream-sediment reconnaissance, orientation study, Ouachita Mountain area, Arkansas. National Uranium Resource Evaluation Program

    SciTech Connect (OSTI)

    Steele, K. F.

    1982-08-01T23:59:59.000Z

    A hydrogeochemical ground water orientation study was conducted in the multi-mineralized area of the Ouachita Mountains, Arkansas in order to evaluate the usefulness of ground water as a sampling medium for uranium exploration in similar areas. Ninety-three springs and nine wells were sampled in Clark, Garland, Hot Springs, Howard, Montgomery, Pike, Polk, and Sevier Counties. Manganese, barite, celestite, cinnabar, stibnite, copper, lead, and zinc are present. The following parameters were determined: pH, conductivity, alkalinity, U, Br, Cl, F, He, Mn, Na, V, Al, Dy, NO/sub 3/, NH/sub 3/, SO/sub 4/, and PO/sub 4/. The minerals appear to significantly affect the chemistry of the ground water. This report is issued in draft form, without detailed technical and copy editing. This was done to make the report available to the public before the end of the National Uranium Resource Evaluation.

  2. Solar Treatment for Mountain Pine Beetle Solar treatment may be appropriate in some areas of Colorado to reduce beetle populations in

    E-Print Network [OSTI]

    Solar Treatment for Mountain Pine Beetle Solar treatment may be appropriate in some areas number of logs in high-value areas. There are two options of solar treatment: with plastic sheeting, and without plastic. Below is a brief description on set-up and difficulties when using solar treatment

  3. Core Holes At Blue Mountain Geothermal Area (Fairbank & Niggemann, 2004) |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformationNew|Core Analysis At Geysers Area(Armstrong, Et Al.,EtOpen

  4. Mesozoic sedimentary rock features resulting from volume movements required in drape folds at corners of basement blocks--Casper Mountain Area, Wyoming

    E-Print Network [OSTI]

    Vaughn, Patty Holyfield

    1976-01-01T23:59:59.000Z

    environment resulted in 700 feet of varicolored shale and sandstone of Jurassic age which lie unconformably upon the Triassic rocks. During Cretaceous time 5, 000 feet of marine sandstone and shale were deposited unconformably on tne Jurassic sediments...MESOZOIC SEDIMENTARY ROCK FEATURES RESULTING FROM VOLUME MOVEMENTS REQUIRED IN DRAPE FOLDS AT CORNERS OF BASEMENT BIOCKS ? CASPER MOUNTAIN AREA, MYOMING A Thesis by PATTY HOLYFIELD VAUGHN Submitted to the Graduate College of Texas A...

  5. Geologyy of the Yucca Mountain Site Area, Southwestern Nevada, Chapter in Stuckless, J.S., ED., Yucca Mountain, Nevada - A Proposed Geologic Repository for High-Level Radioactive Waste (Volume 1)

    SciTech Connect (OSTI)

    W.R. Keefer; J.W. Whitney; D.C. Buesch

    2006-09-25T23:59:59.000Z

    Yucca Mountain in southwestern Nevada is a prominent, irregularly shaped upland formed by a thick apron of Miocene pyroclastic-flow and fallout tephra deposits, with minor lava flows, that was segmented by through-going, large-displacement normal faults into a series of north-trending, eastwardly tilted structural blocks. The principal volcanic-rock units are the Tiva Canyon and Topopah Spring Tuffs of the Paintbrush Group, which consist of volumetrically large eruptive sequences derived from compositionally distinct magma bodies in the nearby southwestern Nevada volcanic field, and are classic examples of a magmatic zonation characterized by an upper crystal-rich (> 10% crystal fragments) member, a more voluminous lower crystal-poor (< 5% crystal fragments) member, and an intervening thin transition zone. Rocks within the crystal-poor member of the Topopah Spring Tuff, lying some 280 m below the crest of Yucca Mountain, constitute the proposed host rock to be excavated for the storage of high-level radioactive wastes. Separation of the tuffaceous rock formations into subunits that allow for detailed mapping and structural interpretations is based on macroscopic features, most importantly the relative abundance of lithophysae and the degree of welding. The latter feature, varying from nonwelded through partly and moderately welded to densely welded, exerts a strong control on matrix porosities and other rock properties that provide essential criteria for distinguishing hydrogeologic and thermal-mechanical units, which are of major interest in evaluating the suitability of Yucca Mountain to host a safe and permanent geologic repository for waste storage. A thick and varied sequence of surficial deposits mantle large parts of the Yucca Mountain site area. Mapping of these deposits and associated soils in exposures and in the walls of trenches excavated across buried faults provides evidence for multiple surface-rupturing events along all of the major faults during Pleistocene and Holocene times; these paleoseismic studies form the basis for evaluating the potential for future earthquakes and fault displacements. Thermoluminescence and U-series analyses were used to date the surficial materials involved in the Quaternary faulting events. The rate of erosional downcutting of bedrock on the ridge crests and hillslopes of Yucca Mountain, being of particular concern with respect to the potential for breaching of the proposed underground storage facility, was studied by using rock varnish cation-ratio and {sup 10}Be and {sup 36}Cl cosmogenic dating methods to determine the length of time bedrock outcrops and hillslope boulder deposits were exposed to cosmic rays, which then served as a basis for calculating long-term erosion rates. The results indicate rates ranging from 0.04 to 0.27 cm/k.y., which represent the maximum downcutting along the summit of Yucca Mountain under all climatic conditions that existed there during most of Quaternary time. Associated studies include the stratigraphy of surficial deposits in Fortymile Wash, the major drainage course in the area, which record a complex history of four to five cut-and-fill cycles within the channel during middle to late Quaternary time. The last 2 to 4 m of incision probably occurred during the last pluvial climatic period, 22 to 18 ka, followed by aggradation to the present time.

  6. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 1, Part A: Chapters 1 and 2

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 750 refs., 123 figs., 42 tabs.

  7. Site Characterization Plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 3, Part A: Chapters 6 and 7

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 218 figs., 50 tabs.

  8. Tungsten Cathode Catalyst for PEMFC

    SciTech Connect (OSTI)

    Joel B. Christian; Sean P. E. Smith

    2006-09-22T23:59:59.000Z

    Final report for project to evaluate tungsten-based catalyst as a cathode catalyst for PEM cell applications.

  9. Aluminum-tungsten fiber composites with cylindrical geometry and controlled architecture of tungsten reinforcement

    E-Print Network [OSTI]

    Lucchese, Carl Joesph

    2010-01-01T23:59:59.000Z

    Measurements in Alumina and Tungsten Fibre-Reinforcedto-Ductile Transition in Tungsten Single Crystals. ” ScienceToughness of Polycrystalline Tungsten Under Mode I and Mixed

  10. Site characterization plan: Yucca Mountain site, Nevada research and development area, Nevada: Consultation draft, Nuclear Waste Policy Act: Volume 2

    SciTech Connect (OSTI)

    NONE

    1988-01-01T23:59:59.000Z

    The Yucca Mountain site in Nevada is one of three candidate sites for the first geologic repository for radioactive waste. On May 28, 1986, it was recommended for detailed study in a program of site characterization. This site characterization plan (SCP) has been prepared in accordance with the requirements of the Nuclear Waste Policy Act to summarize the information collected to date about the geologic conditions at the site; to describe the conceptual designs for the repository and the waste package and to present the plans for obtaining the geologic information necessary to demonstrate the suitability of the site for a repository, to design the repository and the waste package, to prepare an environmental impact statement, and to obtain from the US Nuclear Regulatory Commission (NRC) an authorization to construct the repository. Chapter 3 summarizes present knowledge of the regional and site hydrologic systems. The purpose of the information presented is to (1) describe the hydrology based on available literature and preliminary site-exploration activities that have been or are being performed and (2) provide information to be used to develop the hydrologic aspects of the planned site characterization program. Chapter 4 contains geochemical information about the Yucca Mountain site. The chapter references plan for continued collection of geochemical data as a part of the site characterization program. Chapter 4 describes and evaluates data on the existing climate and site meterology, and outlines the suggested procedures to be used in developing and validating methods to predict future climatic variation. 534 refs., 100 figs., 72 tabs.

  11. Site characterization plan: Yucca Mountain site, Nevada research and development area, Nevada: Consultation draft, Nuclear Waste Policy Act: Volume 7

    SciTech Connect (OSTI)

    NONE

    1988-01-01T23:59:59.000Z

    The Yucca Mountain site in Neavada is one of three candidate sites for the first geologic repository for radioactive waste. On May 28, 1986, it was recommended and approved for detailed study in a program of site characterization. This site characterization plan (SCP) has been prepared in accordance with the requirements of the Nuclear Waste Policy Act to summarize the information collected to date about the geologic conditions at the site;to describe the conceptual designs for the repository and the waste package;and to present the plans for obtaining hte geologic information necessary to demonstrate the suitability of the site for a repository, to design the repository and the waste package, to prepare and environmental impact statement, and to obtain from the US Nuclear Regulatory Commission (NRC) an authorization to construct the repository. This introduction begins with a brief section on the process for siting and developing a repository, followed by a discussion of the pertinent legislation and regulations. A description of site characterization is presented next;it describes the facilities to be constructed for the site characterization program and explains the principal activities to be conducted during the program. Finally, the purpose, content, organizing principles, and organization of this site characterization plan are outlined, and compliance with applicable regulations is discussed.

  12. Site characterization plan: Yucca Mountain site, Nevada research and development area, Nevada: Consultation draft, Nuclear Waste Policy Act: Volume 4

    SciTech Connect (OSTI)

    NONE

    1988-01-01T23:59:59.000Z

    The Yucca Mountain site in Nevada is one of three candidate sites for the first geologic repository for radioactive waste. On May 28, 1986, it was recommended and approved by the President for detailed study in a program of site characterization. This site characterization plan (SCP) has been prepared in accordance with the requirements of the Nuclear Waste Policy Act to summarize the information collected to date about the geologic conditions at the site; to describe the conceptual designs for the repository and the waste package; and to present the plans for obtaining the geologic information necessary to demonstate the suitability of the site for a repository, to desin the repository and the waste package, to prepare an environmental impact statement, and to obtain from the US Nuclear Regulatory Commission (NRC) an authorization to construct the repository. This introduction begins with a brief section on the process for siting and developing a repository, followed by a discussion of the pertinent legislation and regulations. A description of site characterization is presented next; it describes the facilities to be constructed for the site characterization program and explains the principal activities to be conducted during the program. Finally, the purpose, content, organizing principles, and organization of this site characterization plan are outlined, and compliance with applicable regulations is discussed.

  13. Site characterization plan: Yucca Mountain site, Nevada research and development area, Nevada: Consultation draft, Nuclear Waste Policy Act

    SciTech Connect (OSTI)

    NONE

    1988-01-01T23:59:59.000Z

    The Yucca Mountain site in Nevada is one of three candidate sites for the first geologic repository for radioactive waste. On May 28, 1986, it was recommended by the Secretary of Energy and approved by the President for detailed study in a program of site characterization. This site characterization plan (SCP) has been prepared by the US Department of Energy (DOE) in accordance with the requirements of the Nulcear Waste Policy Act to summarize the information collected to date about the geologic conditions at the site;to describe the conceptual designs for the repository and the waste package;and to present the plans for obtaining the geologic information necessary to demonstrate the suitability of the site for a repository, to design the repository and the waste package, to prepare an environmental impact statement, and to obtain from the US Nuclear Regulatory Commission (NRC) an authorization to construct the repository. This introduction begins with a brief section on the process for siting and developing a repository, followed by a discussion of the pertinent legislation and regulations. A description of site characterization is presented next;it describes the facilities to be constructed for the site characterization program and explains the principal activities to be conducted during the program. Finally, the purpose, content, organizing principles, and organization of the site characterization plan are oulined, and compliance with applicable regulations is discussed.

  14. Site characterization plan: Yucca Mountain site, Nevada research and development area, Nevada: Consultation draft, Nuclear Waste Policy Act: Volume 1

    SciTech Connect (OSTI)

    NONE

    1988-01-01T23:59:59.000Z

    The Yucca Mountain site in Nevada is one of three candidate sites for the first geologic repository for radioactive waste. On May 28, 1986, it was recommended for detailed study in a program of site characterization. This site characterization plan (SCP) has been prepared in acordance with the requirements of the Nuclear Waste Policy Act to summarize the information collected to date about the geologic conditions at the site;to describe the conceptual designs for the repository and the waste package and to present the plans for obtaining the geologic information necessary to demonstrate the suitability of the site for a repository, to design the repository and the waste package, to prepare an environmental impact statement, and to obtain from the US Nuclear Regulatory Commission (NRC) an authorization to construct the repository. This introduction begins with a brief section on the process for siting and eveloping a repository, followed by a discussion of the pertinent legislation and regulations. A description of site characterization is presented next;it describes the facilities to be constructed for the site characterization program and explains the principal activities to be conducted during the program. Finally, the purpose, content, organizing prinicples, and organization of this site characterization plan are outlined, and compliance with applicable regulations is discussed. 880 refs., 130 figs., 25 tabs.

  15. Atmospheric mercury in Changbai Mountain area, northeastern China I. The seasonal distribution pattern of total gaseous mercury and its potential sources

    SciTech Connect (OSTI)

    Wan, Q.; Feng, X.B.; Lu, J.L.; Zheng, W.; Song, X.J.; Han, S.J.; Xu, H. [Chinese Academy of Sciences, Guiyang (China). Inst. of Geochemistry

    2009-04-15T23:59:59.000Z

    An intensive field campaign for the measurement of total gaseous mercury (TGM) concentrations in ambient air was conducted in Changbai Mountain area from 5 August 2005 to 5 July 2006 using an automatic atmospheric mercury analyzer (Tekran 2537A), which was the first time TGM was monitored at a remote area in northeastern China. 99% of the hourly TGM concentrations fell between 1.28 and 9.49 ng m{sup -3} with an annual arithmetic mean of 3.58 {+-} 1.78 ng m{sup -3}, which was significantly elevated compared to values obtained in remote areas of Europe and North America. Seasonal mean TGM concentrations displayed a descending trend as follows: winter, spring, fall, and summer. Compared to spring/winter, TGM concentrations were lower in the summer/fall but the standard deviation (SD) of TGM levels was higher and indicated a correlation with anthropogenic emissions. TGM concentrations showed seasonal differences with respect to meteorological parameters: TGM levels in spring/winter were most correlated with wind speed, and correlated with solar radiation only in the winter, while TGM levels in summer/fall periods were most correlated with air temperature. There was a strong diurnal variation of seasonal TGM with significantly higher concentrations in daytime/nighttime compared to the early morning. The seasonal diel TGM pattern indicated regional biofuel and coal combustion were the primary mercury sources.

  16. Helium bubble bursting in tungsten

    SciTech Connect (OSTI)

    Sefta, Faiza [University of California, Berkeley, California 94720 (United States); Juslin, Niklas [University of Tennessee, Knoxville, Tennessee 37996 (United States); Wirth, Brian D., E-mail: bdwirth@utk.edu [University of Tennessee, Oak Ridge National Laboratory, Knoxville, Tennessee 37996 (United States)

    2013-12-28T23:59:59.000Z

    Molecular dynamics simulations have been used to systematically study the pressure evolution and bursting behavior of sub-surface helium bubbles and the resulting tungsten surface morphology. This study specifically investigates how bubble shape and size, temperature, tungsten surface orientation, and ligament thickness above the bubble influence bubble stability and surface evolution. The tungsten surface is roughened by a combination of adatom “islands,” craters, and pinholes. The present study provides insight into the mechanisms and conditions leading to various tungsten topology changes, which we believe are the initial stages of surface evolution leading to the formation of nanoscale fuzz.

  17. Predevelopment Water-Level Contours for Aquifers in the Rainier Mesa and Shoshone Mountain area of the Nevada Test Site, Nye County, Nevada

    SciTech Connect (OSTI)

    Joseph M. Fenelon; Randell J. Laczniak; and Keith J. Halford

    2008-06-24T23:59:59.000Z

    Contaminants introduced into the subsurface of the Nevada Test Site at Rainier Mesa and Shoshone Mountain by underground nuclear testing are of concern to the U.S. Department of Energy and regulators responsible for protecting human health and safety. Although contaminants were introduced into low-permeability rocks above the regional flow system, the potential for contaminant movement away from the underground test areas and into the accessible environment is greatest by ground-water transport. The primary hydrologic control on this transport is evaluated and examined through a series of contour maps developed to represent the water-level distribution within each of the major aquifers underlying the area. Aquifers were identified and their extents delineated by merging and analyzing multiple hydrostratigraphic framework models developed by other investigators from existing geologic information. The contoured water-level distribution in each major aquifer was developed from a detailed evaluation and assessment of available water-level measurements. Multiple spreadsheets that accompany this report provide pertinent water-level and geologic data by well or drill hole. Aquifers are mapped, presented, and discussed in general terms as being one of three aquifer types—volcanic aquifer, upper carbonate aquifer, or lower carbonate aquifer. Each of these aquifer types was subdivided and mapped as independent continuous and isolated aquifers, based on the continuity of its component rock. Ground-water flow directions, as related to the transport of test-generated contaminants, were developed from water-level contours and are presented and discussed for each of the continuous aquifers. Contoured water-level altitudes vary across the study area and range from more than 5,000 feet in the volcanic aquifer beneath a recharge area in the northern part of the study area to less than 2,450 feet in the lower carbonate aquifer in the southern part of the study area. Variations in water-level altitudes within any single continuous aquifer range from a few hundred feet in a lower carbonate aquifer to just more than 1,100 feet in a volcanic aquifer. Flow directions throughout the study area are dominantly southward with minor eastward or westward deviations. Primary exceptions are westward flow in the northern part of the volcanic aquifer and eastward flow in the eastern part of the lower carbonate aquifer. Northward flow in the upper and lower carbonate aquifers in the northern part of the study area is possible but cannot be substantiated because data are lacking. Interflow between continuous aquifers is evaluated and mapped to define major flow paths. These flow paths delineate tributary flow systems, which converge to form the regional ground-water flow system. The implications of these tributary flow paths in controlling transport away from the underground test areas at Rainier Mesa and Shoshone Mountain are discussed. The obvious data gaps contributing to uncertainties in the delineation of aquifers and development of water-level contours are identified and evaluated.

  18. Preparation, Characterization, and Catalytic Properties of Tungsten...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Preparation, Characterization, and Catalytic Properties of Tungsten Trioxide Cyclic Trimers on FeO(111)Pt(111). Preparation, Characterization, and Catalytic Properties of Tungsten...

  19. Comproportionation of Cationic and Anionic Tungsten Complexes...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Comproportionation of Cationic and Anionic Tungsten Complexes Having an N-Heterocyclic Carbene Ligand to Give the Isolable 17 Comproportionation of Cationic and Anionic Tungsten...

  20. Thermal-treatment effect on the photoluminescence and gas-sensing properties of tungsten oxide nanowires

    SciTech Connect (OSTI)

    Sun, Shibin [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong (China)] [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong (China); Chang, Xueting [Institute of Materials Science and Engineering, Ocean University of China, Qingdao 266100, Shandong (China)] [Institute of Materials Science and Engineering, Ocean University of China, Qingdao 266100, Shandong (China); Li, Zhenjiang, E-mail: zjli126@126.com [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong (China)] [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061, Shandong (China)

    2010-09-15T23:59:59.000Z

    Single-crystalline non-stoichiometric tungsten oxide nanowires were initially prepared using a simple solvothermal method. High resolution transmission electron microscopy (HRTEM) investigations indicate that the tungsten oxide nanowires exhibit various crystal defects, including stacking faults, dislocations, and vacancies. A possible defect-induced mechanism was proposed to account for the temperature-dependent morphological evolution of the tungsten oxide nanowires under thermal processing. Due to the high specific surface areas and non-stoichiometric crystal structure, the original tungsten oxide nanowires were highly sensitive to ppm level ethanol at room temperature. Thermal treatment under dry air condition was found to deteriorate the selectivity of room-temperature tungsten oxide sensors, and 400 {sup o}C may be considered as the top temperature limit in sensor applications for the solvothermally-prepared nanowires. The photoluminescence (PL) characteristics of tungsten oxide nanowires were also strongly influenced by thermal treatment.

  1. Preparation of tungsten oxide

    DOE Patents [OSTI]

    Bulian, Christopher J. (Yankton, SD); Dye, Robert C. (Los Alamos, NM); Son, Steven F. (Los Alamos, NM); Jorgensen, Betty S. (Jemez Springs, NM); Perry, W. Lee (Jemez Springs, NM)

    2009-09-22T23:59:59.000Z

    Tungsten trioxide hydrate (WO.sub.3.H.sub.2O) was prepared from a precursor solution of ammonium paratungstate in concentrated aqueous hydrochloric acid. The precursor solution was rapidly added to water, resulting in the crash precipitation of a yellow white powder identified as WO.sub.3.H.sub.2O nanosized platelets by x-ray diffraction and scanning electron microscopy. Annealing of the powder at 200.degree. C. provided cubic phase WO.sub.3 nanopowder, and at 400.degree. C. provided WO.sub.3 nanopowder as a mixture of monoclinic and orthorhombic phases.

  2. Dynamics of femtosecond laser produced tungsten nanoparticle plumes S. S. Harilal,1

    E-Print Network [OSTI]

    Harilal, S. S.

    Dynamics of femtosecond laser produced tungsten nanoparticle plumes S. S. Harilal,1 N. Farid,1,2 A tungsten nanoparticle plumes in vacuum. Fast gated images showed distinct two components expansion features.1063/1.4833564] I. INTRODUCTION Nanoparticle production and application research is an area of significant

  3. High strength uranium-tungsten alloys

    DOE Patents [OSTI]

    Dunn, Paul S. (Santa Fe, NM); Sheinberg, Haskell (Los Alamos, NM); Hogan, Billy M. (Los Alamos, NM); Lewis, Homer D. (Bayfield, CO); Dickinson, James M. (Los Alamos, NM)

    1991-01-01T23:59:59.000Z

    Alloys of uranium and tungsten and a method for making the alloys. The amount of tungsten present in the alloys is from about 4 wt % to about 35 wt %. Tungsten particles are dispersed throughout the uranium and a small amount of tungsten is dissolved in the uranium.

  4. High strength uranium-tungsten alloy process

    DOE Patents [OSTI]

    Dunn, Paul S. (Santa Fe, NM); Sheinberg, Haskell (Los Alamos, NM); Hogan, Billy M. (Los Alamos, NM); Lewis, Homer D. (Bayfield, CO); Dickinson, James M. (Los Alamos, NM)

    1990-01-01T23:59:59.000Z

    Alloys of uranium and tungsten and a method for making the alloys. The amount of tungsten present in the alloys is from about 4 wt % to about 35 wt %. Tungsten particles are dispersed throughout the uranium and a small amount of tungsten is dissolved in the uranium.

  5. Prediction of Pseudo relative velocity response spectra at Yucca Mountain for underground nuclear explosions conducted in the Pahute Mesa testing area at the Nevada testing site; Yucca Mountain Site Characterization Project

    SciTech Connect (OSTI)

    Phillips, J.S.

    1991-12-01T23:59:59.000Z

    The Yucca Mountain Site Characterization Project (YMP), managed by the Office of Geologic Disposal of the Office of Civilian Radioactive Waste Management of the US Department of Energy, is examining the feasibility of siting a repository for commercial, high-level nuclear wastes at Yucca Mountain on and adjacent to the Nevada Test Site (NTS). This work, intended to extend our understanding of the ground motion at Yucca Mountain resulting from testing of nuclear weapons on the NTS, was funded by the Yucca Mountain project and the Military Applications Weapons Test Program. This report summarizes one aspect of the weapons test seismic investigations conducted in FY88. Pseudo relative velocity response spectra (PSRV) have been calculated for a large body of surface ground motions generated by underground nuclear explosions. These spectra have been analyzed and fit using multiple linear regression techniques to develop a credible prediction technique for surface PSRVs. In addition, a technique for estimating downhole PSRVs at specific stations is included. A data summary, data analysis, prediction development, prediction evaluation, software summary and FORTRAN listing of the prediction technique are included in this report.

  6. Discovery of the Tungsten Isotopes

    E-Print Network [OSTI]

    A. Fritsch; J. Q. Ginepro; M. Heim; A. Schuh; A. Shore; M. Thoennessen

    2009-03-25T23:59:59.000Z

    Thirty-five tungsten isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  7. Discovery of the tungsten isotopes

    SciTech Connect (OSTI)

    Fritsch, A.; Ginepro, J.Q.; Heim, M.; Schuh, A.; Shore, A. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Thoennessen, M. [National Superconducting Cyclotron Laboratory and Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States)], E-mail: thoennessen@nscl.msu.edu

    2010-05-15T23:59:59.000Z

    Thirty-five tungsten isotopes have been observed so far and the discovery of these isotopes is discussed here. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  8. Discovery of the Tungsten Isotopes

    E-Print Network [OSTI]

    Fritsch, A; Heim, M; Schuh, A; Shore, A; Thoennessen, M

    2009-01-01T23:59:59.000Z

    Thirty-five tungsten isotopes have so far been observed; the discovery of these isotopes is discussed. For each isotope a brief summary of the first refereed publication, including the production and identification method, is presented.

  9. Process Of Bonding Copper And Tungsten

    DOE Patents [OSTI]

    Slattery, Kevin T. (St. Charles, MO); Driemeyer, Daniel E. (Manchester, MO); Davis, John W. (Ballwin, MO)

    2000-07-18T23:59:59.000Z

    Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by sintering a stack of individual copper and tungsten powder blend layers having progressively higher copper content/tungsten content, by volume, ratio values in successive powder blend layers in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

  10. MULTICOMPONENT SEISMIC ANALYSIS AND CALIBRATION TO IMPROVE RECOVERY FROM ALGAL MOUNDS: APPLICATION TO THE ROADRUNNER/TOWAOC AREA OF THE PARADOX BASIN, UTE MOUNTAIN UTE RESERVATION, COLORADO

    SciTech Connect (OSTI)

    Paul La Pointe; Claudia Rebne; Steve Dobbs

    2003-07-10T23:59:59.000Z

    This report describes the results made in fulfillment of contract DE-FG26-02NT15451, ''Multicomponent Seismic Analysis and Calibration to Improve Recovery from Algal Mounds: Application to the Roadrunner/Towaoc Area of the Paradox Basin, Ute Mountain Ute Reservation, Colorado''. Optimizing development of highly heterogeneous reservoirs where porosity and permeability vary in unpredictable ways due to facies variations can be challenging. An important example of this is in the algal mounds of the Lower and Upper Ismay reservoirs of the Paradox Basin in Utah and Colorado. It is nearly impossible to develop a forward predictive model to delineate regions of better reservoir development, and so enhanced recovery processes must be selected and designed based upon data that can quantitatively or qualitatively distinguish regions of good or bad reservoir permeability and porosity between existing well control. Recent advances in seismic acquisition and processing offer new ways to see smaller features with more confidence, and to characterize the internal structure of reservoirs such as algal mounds. However, these methods have not been tested. This project will acquire cutting edge, three-dimensional, nine-component (3D9C) seismic data and utilize recently-developed processing algorithms, including the mapping of azimuthal velocity changes in amplitude variation with offset, to extract attributes that relate to variations in reservoir permeability and porosity. In order to apply advanced seismic methods a detailed reservoir study is needed to calibrate the seismic data to reservoir permeability, porosity and lithofacies. This will be done by developing a petrological and geological characterization of the mounds from well data; acquiring and processing the 3D9C data; and comparing the two using advanced pattern recognition tools such as neural nets. In addition, should the correlation prove successful, the resulting data will be evaluated from the perspective of selecting alternative enhanced recovery processes, and their possible implementation. The work is being carried out on the Roadrunner/Towaoc Fields of the Ute Mountain Ute Tribe, located in the southwestern corner of Colorado. Although this project is focused on development of existing resources, the calibration established between the reservoir properties and the 3D9C seismic data can also enhance exploration success. During the time period covered by this report, the majority of the project effort has gone into the permitting, planning and design of the 3D seismic survey, and to select a well for the VSP acquisition. The business decision in October, 2002 by WesternGeco, the projects' seismic acquisition contractor, to leave North America, has delayed the acquisition until late summer, 2003. The project has contracted Solid State, a division of Grant Geophysical, to carry out the acquisition. Moreover, the survey has been upgraded to a 3D9C from the originally planned 3D3C survey, which should provide even greater resolution of mounds and internal mound structure.

  11. Tungsten diffusion in silicon

    SciTech Connect (OSTI)

    De Luca, A.; Texier, M.; Burle, N.; Oison, V.; Pichaud, B. [Aix-Marseille Université, IM2NP UMR 7334, Faculté des Sciences et Techniques, Campus de Saint-Jérōme, Avenue Escadrille Normandie Niemen - Case 142, F-13397 Marseille Cedex (France); Portavoce, A., E-mail: alain.portavoce@im2np.fr [CNRS, IM2NP UMR 7334, Faculté des Sciences et Techniques, Campus de Saint-Jérōme, Avenue Escadrille Normandie Niemen - Case 142, F-13397 Marseille Cedex (France); Grosjean, C. [STMicroelectronics, Rousset (France)

    2014-01-07T23:59:59.000Z

    Two doses (10{sup 13} and 10{sup 15}?cm{sup ?2}) of tungsten (W) atoms were implanted in different Si(001) wafers in order to study W diffusion in Si. The samples were annealed or oxidized at temperatures between 776 and 960?°C. The diffusion profiles were measured by secondary ion mass spectrometry, and defect formation was studied by transmission electron microscopy and atom probe tomography. W is shown to reduce Si recrystallization after implantation and to exhibit, in the temperature range investigated, a solubility limit close to 0.15%–0.2%, which is higher than the solubility limit of usual metallic impurities in Si. W diffusion exhibits unusual linear diffusion profiles with a maximum concentration always located at the Si surface, slower kinetics than other metals in Si, and promotes vacancy accumulation close to the Si surface, with the formation of hollow cavities in the case of the higher W dose. In addition, Si self-interstitial injection during oxidation is shown to promote W-Si clustering. Taking into account these observations, a diffusion model based on the simultaneous diffusion of interstitial W atoms and W-Si atomic pairs is proposed since usual models used to model diffusion of metallic impurities and dopants in Si cannot reproduce experimental observations.

  12. Multicomponent Seismic Analysis and Calibration to Improve Recovery from Algal Mounds: Application to the Roadrunner/Towaoc area of the Paradox Basin, UTE Mountain UTE Reservation, Colorado

    SciTech Connect (OSTI)

    Joe Hachey

    2007-09-30T23:59:59.000Z

    The goals of this project were: (1) To enhance recovery of oil contained within algal mounds on the Ute Mountain Ute tribal lands. (2) To promote the use of advanced technology and expand the technical capability of the Native American Oil production corporations by direct assistance in the current project and dissemination of technology to other Tribes. (3) To develop an understanding of multicomponent seismic data as it relates to the variations in permeability and porosity of algal mounds, as well as lateral facies variations, for use in both reservoir development and exploration. (4) To identify any undiscovered algal mounds for field-extension within the area of seismic coverage. (5) To evaluate the potential for applying CO{sub 2} floods, steam floods, water floods or other secondary or tertiary recovery processes to increase production. The technical work scope was carried out by: (1) Acquiring multicomponent seismic data over the project area; (2) Processing and reprocessing the multicomponent data to extract as much geological and engineering data as possible within the budget and time-frame of the project; (3) Preparing maps and data volumes of geological and engineering data based on the multicomponent seismic and well data; (4) Selecting drilling targets if warranted by the seismic interpretation; (5) Constructing a static reservoir model of the project area; and (6) Constructing a dynamic history-matched simulation model from the static model. The original project scope covered a 6 mi{sup 2} (15.6 km{sup 2}) area encompassing two algal mound fields (Towaoc and Roadrunner). 3D3C seismic data was to acquired over this area to delineate mound complexes and image internal reservoir properties such as porosity and fluid saturations. After the project began, the Red Willow Production Company, a project partner and fully-owned company of the Southern Ute Tribe, contributed additional money to upgrade the survey to a nine-component (3D9C) survey. The purpose of this upgrade to nine components was to provide additional shear wave component data that might prove useful in delineating internal mound reservoir attributes. Also, Red Willow extended the P-wave portion of the survey to the northwest of the original 6 mi{sup 2} (15.6 km{sup 2}) 3D9C area in order to extend coverage further to the northwest to the Marble Wash area. In order to accomplish this scope of work, 3D9C seismic data set covering two known reservoirs was acquired and processed. Three-dimensional, zero-offset vertical seismic profile (VSP) data was acquired to determine the shear wave velocities for processing the sh3Dseismic data. Anisotropic velocity, and azimuthal AVO processing was carried out in addition to the conventional 3D P-wave data processing. All P-, PS- and S-wave volumes of the seismic data were interpreted to map the seismic response. The interpretation consisted of conventional cross-plots of seismic attributes vs. geological and reservoir engineering data, as well as multivariate and neural net analyses to assess whether additional resolution on exploration and engineering parameters could be achieved through the combined use of several seismic variables. Engineering data in the two reservoirs was used to develop a combined lithology, structure and permeability map. On the basis of the seismic data, a well was drilled into the northern mound trend in the project area. This well, Roadrunner No.9-2, was brought into production in late April 2006 and continues to produce modest amounts of oil and gas. As of the end of August 2007, the well has produced approximately 12,000 barrels of oil and 32,000 mcf of gas. A static reservoir model was created from the seismic data interpretations and well data. The seismic data was tied to various markers identified in the well logs, which in turn were related to lithostratigraphy. The tops and thicknesses of the various units were extrapolated from well control based upon the seismic data that was calibrated to the well picks. The reservoir engineering properties were available from a number of wel

  13. Yucca Mountain

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative1 First Use of Energy for All Purposes (Fuel and Nonfuel), 2002; Level:Energy: Grid Integration Redefining What'sis Taking Over OurThe Iron SpinPrincetonUsingWhatY-12 recognizedThesis PrizeYucca Mountain We are

  14. Method of synthesizing tungsten nanoparticles

    SciTech Connect (OSTI)

    Thoma, Steven G; Anderson, Travis M

    2013-02-12T23:59:59.000Z

    A method to synthesize tungsten nanoparticles has been developed that enables synthesis of nanometer-scale, monodisperse particles that can be stabilized only by tetrahydrofuran. The method can be used at room temperature, is scalable, and the product concentrated by standard means. Since no additives or stabilizing surfactants are required, this method is particularly well suited for producing tungsten nanoparticles for dispersion in polymers. If complete dispersion is achieved due to the size of the nanoparticles, then the optical properties of the polymer can be largely maintained.

  15. Evaluation of the geologic relations and seismotectonic stability of the Yucca Mountain area, Nevada Nuclear Waste Site Investigation (NNWSI); Final report, January 1, 1987--June 30, 1988: Volume 1

    SciTech Connect (OSTI)

    NONE

    1988-10-01T23:59:59.000Z

    This report provides a summary of progress for the project ``Evaluation of the Geologic Relations and Seismotectonic Stability of the Yucca Mountain Area, Nevada Nuclear Waste Site Investigation (NNWSI)`` for the eighteen month period of January 1, 1987 to June 10, 1988. This final report was preceded by the final report for the initial six month period, July 1, 1986 to December 31, 1986 (submitted on January 25, 1987, and revised in June 1987.) Quaternary Tectonics, Geochemical, Mineral Deposits, Vulcanic Geology, Seismology, Tectonics, Neotectonics, Remote Sensing, Geotechnical Assessments, Geotechnical Rock Mass Assessments, Basinal Studies, and Strong Ground Motion.

  16. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 2, Part A: Chapters 3, 4, and 5

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1--5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 575 refs., 84 figs., 68 tabs.

  17. Process Of Bonding Copper And Tungsten

    DOE Patents [OSTI]

    Slattery, Kevin T. (St. Charles, MO); Driemeyer, Daniel E. (Manchester, MO)

    1999-11-23T23:59:59.000Z

    Process for bonding a copper substrate to a tungsten substrate by providing a thin metallic adhesion promoting film bonded to a tungsten substrate and a functionally graded material (FGM) interlayer bonding the thin metallic adhesion promoting film to the copper substrate. The FGM interlayer is formed by thermal plasma spraying mixtures of copper powder and tungsten powder in a varied blending ratio such that the blending ratio of the copper powder and the tungsten powder that is fed to a plasma torch is intermittently adjusted to provide progressively higher copper content/tungsten content, by volume, ratio values in the interlayer in a lineal direction extending from the tungsten substrate towards the copper substrate. The resulting copper to tungsten joint well accommodates the difference in the coefficient of thermal expansion of the materials.

  18. Accepted Manuscript Making Tungsten Work

    E-Print Network [OSTI]

    Raffray, A. RenƩ

    Thermonuclear Experimental Reactor Organization, Cadarache, FRANCE 3 Plasma Science and Fusion Center at MIT International Thermonuclear Experimental Reactor Organization, Cadarache, FRANCE 3 Plasma Science and Fusion Thermonuclear Experimental Reactor). Tungsten (W) is the plasma-facing material of choice in several design

  19. Electrical Resistivity and Self-Potential Surveys Blue Mountain...

    Open Energy Info (EERE)

    Self-Potential Surveys Blue Mountain Geothermal Area, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Electrical Resistivity and...

  20. Diffusion of tungsten clusters on tungsten (110) surface

    SciTech Connect (OSTI)

    Chen, Dong; Hu, Wangyu; Yang, Jianyu; Deng, Huiqiu; Sun, Lixian; Gao, Fei

    2009-04-01T23:59:59.000Z

    Using molecular dynamics simulation and modified analytic embedded-atom method, we have investigated the self-diffusion of clusters on a tungsten (110) surface. As compared to the linear-chain configuration, the close-packed islands for tungsten clusters containing more than nine adatoms have been predicted to be more stable with the relatively lower binding energies. The migration energies show an interesting and oscillating behavior with increasing cluster size. The tetramer, hexamer and octamer have obviously higher migration energies than the others. The different atomic configurations and diffusion mechanisms have been determined during the diffusion processes. It is clear that the dimer-shearing mechanism occurs inside the hexamer, while it occurs at the periphery of heptamer. The successive hopping mechanism of individual atom is of critical importance in the migration of the clusters containing five or fewer adatoms. In addition, the diffusion of a cluster with nine adatoms is achieved through the changes of the cluster shape.

  1. Hunchback Shelter: A Fremont Lithic Production Site in the Mineral Mountains of Eastern Utah

    E-Print Network [OSTI]

    Greubel, Rand A.; Andrews, Bradford W.

    2008-01-01T23:59:59.000Z

    Mineral Mountains or Black Rock sources (Talbot et al. 2000:Canyon, and Black Rock obsidian source areas. occupations

  2. A Well-Defined, Silica-Supported Tungsten Imido Alkylidene Olefin Metathesis Catalyst

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    deactivation. Keywords. Tungsten Imido Alkylidene complex.monosiloxy alkylidene tungsten surface complex syn-2, [(_

  3. Gamma Spectrum from Neutron Capture on Tungsten Isotopes

    E-Print Network [OSTI]

    Hurst, Aaron

    2011-01-01T23:59:59.000Z

    FROM NEUTRON CAPTURE ON TUNGSTEN ISOTOPES A. M. HURST ?1,2 ,capture on the stable tungsten isotopes is presented, withknown decay schemes of the tungsten isotopes from neutron

  4. Factors controlling tungsten concentrations in ground water, Carson Desert, Nevada

    E-Print Network [OSTI]

    Factors controlling tungsten concentrations in ground water, Carson Desert, Nevada Ralph L. Seiler sources. Tungsten concentrations in 100 ground water samples from all aquifers used as drinking water indicates that W exhibits Tungsten con- centrations are strongly and positively correlated

  5. Growth of Ordered Ultrathin Tungsten Oxide Films on Pt(111)....

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Growth of Ordered Ultrathin Tungsten Oxide Films on Pt(111). Growth of Ordered Ultrathin Tungsten Oxide Films on Pt(111). Abstract: Ordered tungsten oxide ultra-thin films were...

  6. Effects of Tungsten Oxide Addition on the Electrochemical Performance...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tungsten Oxide Addition on the Electrochemical Performance of Nanoscale Tantalum Oxide-Based Electrocatalysts for Effects of Tungsten Oxide Addition on the Electrochemical...

  7. Synthesis and electrochemical capacitance of long tungsten oxide nanorod arrays grown vertically on substrate

    SciTech Connect (OSTI)

    Park, Sun Hwa [Department of Nanomaterials Science and Engineering, University of Science and Technology, Daejeon 305-350 (Korea, Republic of)] [Department of Nanomaterials Science and Engineering, University of Science and Technology, Daejeon 305-350 (Korea, Republic of); Kim, Young Heon; Lee, Tae Geol; Shon, Hyun Kyong [Korea Research Institute of Standards and Science, Daejeon 305-340 (Korea, Republic of)] [Korea Research Institute of Standards and Science, Daejeon 305-340 (Korea, Republic of); Park, Hyun Min [Department of Nanomaterials Science and Engineering, University of Science and Technology, Daejeon 305-350 (Korea, Republic of) [Department of Nanomaterials Science and Engineering, University of Science and Technology, Daejeon 305-350 (Korea, Republic of); Korea Research Institute of Standards and Science, Daejeon 305-340 (Korea, Republic of); Song, Jae Yong, E-mail: jysong@kriss.re.kr [Korea Research Institute of Standards and Science, Daejeon 305-340 (Korea, Republic of); Department of Nano Science, University of Science and Technology, Daejeon 305-350 (Korea, Republic of)

    2012-11-15T23:59:59.000Z

    Highlights: ? Growth of long amorphous tungsten oxide nanorods on a substrate. ? Formation of single-crystalline tungsten oxide nanorods by a heat-treatment. ? High electrochemical pseudocapacitance of 2.8 mF cm{sup ?2}. ? Excellent cyclability of psuedocapacitance up to 1000 cycles. -- Abstract: Long tungsten oxide nanorods are vertically grown on Al/W/Ti coated silicon substrates using a two-step anodization process. The first anodization of the Al film forms a mesh-like mask of anodic aluminum oxide, and the second anodization of the W film results in the formation of a buffer layer, a bottom nanorod, and a top nanorod of amorphous tungsten oxide. A pore-widening process prior to the second anodization leads to the enhancement of nanorod length above approximately 500 nm. After a heat-treatment, the tungsten oxide nanorods are crystallized to form a single crystalline structure while the buffer layer forms a polycrystalline structure. The crystalline tungsten oxide nanorods show a cyclic voltammogram retaining the quasi-rectangular shape of an electrochemically reversible faradaic redox reaction, i.e., a typical pseudocapacitive behavior. The maximum electrochemical capacitance per apparent surface area reaches approximately 2.8 mF cm{sup ?2} at the voltage scan rate of 20 mV s{sup ?1}, and the excellent cyclability of charge–discharge process is maintained up to 1000 cycles.

  8. Effects of seed production, seedbed condition, and overstory basal area on the establishment of shortleaf pine seedlings in the Ouachita Mountains. Forest Service research paper

    SciTech Connect (OSTI)

    Shelton, M.G.

    1995-09-01T23:59:59.000Z

    First-year seedlings establishment was determined across an array of seedbed conditions and overstory basal areas in stands of shortleaf pine (Pinus echinata Mill.) and hardwoods following the initial harvest implementing uneven-aged silviculture. Results indicate the importance of regulating overstory basal area in the application of uneven-aged silviculture in stands featuring short-leaf pine. When total overstory basal area was within the guidelines for uneven-aged stands (45 to 75 sq.ft.acre), seedbeds of mineral soil and partial and undisturbed litter resulted in ample regeneration even with seed crops that were slightly below regional averages. Composition of the overstory basal area apparently did not strongly affect initial seedling establishment in areas having sparse ground vegetation and should not be extended to longer time periods or other conditions.

  9. Assessing Variation in Wildlife Biodiversity in the Tien Shan Mountains of Kyrgyzstan Using Ancillary

    E-Print Network [OSTI]

    Schweik, Charles M.

    Assessing Variation in Wildlife Biodiversity in the Tien Shan Mountains of Kyrgyzstan Using of Kyrgyzstan and assessed their usefulness for biodiversity surveys of larger animal species. The study: Camera-trapping; biodiversity; conservation; mammals; protected areas; Tien Shan Mountains; Kyrgyzstan

  10. High strength and density tungsten-uranium alloys

    DOE Patents [OSTI]

    Sheinberg, Haskell (Los Alamos, NM)

    1993-01-01T23:59:59.000Z

    Alloys of tungsten and uranium and a method for making the alloys. The amount of tungsten present in the alloys is from about 55 vol % to about 85 vol %. A porous preform is made by sintering consolidated tungsten powder. The preform is impregnated with molten uranium such that (1) uranium fills the pores of the preform to form uranium in a tungsten matrix or (2) uranium dissolves portions of the preform to form a continuous uranium phase containing tungsten particles.

  11. Physical properties of erbium implanted tungsten oxide films deposited by reactive dual magnetron sputtering

    E-Print Network [OSTI]

    Mohamed, Sodky H.; Anders, Andre

    2006-01-01T23:59:59.000Z

    of erbium implanted tungsten oxide films deposited byDual magnetron sputtering; tungsten oxide films; Er ionoptical waveguides [3,5]. Tungsten oxide (WO 3 ) thin films

  12. FINAL FOCUS ION BEAM INTENSITY FROM TUNGSTEN FOIL CALORIMETER AND SCINTILLATOR IN NDCX-I

    E-Print Network [OSTI]

    Lidia, S.M.

    2010-01-01T23:59:59.000Z

    FOCUS ION BEAM INTENSITY FROM TUNGSTEN FOIL CALORIMETER ANDtemperature rise in the tungsten foil. A cross-calibrationis obtained with a 3µm thick tungsten foil calorimeter and

  13. T-1018 UCLA Spacordion Tungsten Powder Calorimeter

    SciTech Connect (OSTI)

    Trentalange, Stephen; Tsai, Oleg; Igo, George; Huang, Huan; Pan, Yu Xi; Dunkelberger, Jay; Xu, Wen Qin; /UCLA; Soha, Aria; /Fermilab; Heppelmann, Steven; /Penn State U.; Gagliardi, Carl; /Texas A-M

    2011-11-16T23:59:59.000Z

    The present experiments at the BNL-RHIC facility are evolving towards physics goals which require the detection of medium energy electromagnetic particles (photons, electrons, neutral pions, eta mesons, etc.), especially at forward angles. New detectors will place increasing demands on energy resolution, hadron rejection and two-photon resolution and will require large area, high performance electromagnetic calorimeters in a variety of geometries. In the immediate future, either RHIC or JLAB will propose a facility upgrade (Electron-Ion Collider, or EIC) with physics goals such as electron-heavy ion collisions (or p-A collisions) with a wide range of calorimeter requirements. An R and D program based at Brookhaven National Laboratory has awarded the group funding of approximately $110,000 to develop new types of calorimeters for EIC experiments. The UCLA group is developing a method to manufacture very flexible and cost-effective, yet high quality calorimeters based on scintillating fibers and tungsten powder. The design and features of the calorimeter can be briefly stated as follows: an arbitrarily large number of small diameter fibers (< 0.5 mm) are assembled as a matrix and held rigidly in place by a set of precision screens inside an empty container. The container is then back-filled with tungsten powder, compacted on a vibrating table and infused with epoxy under vacuum. The container is then removed. The resulting sub-modules are extremely uniform and achieve roughly the density of pure Lead. The sub-modules are stacked together to achieve a final detector of the desired shape. There is no dead space between sub-modules and the fibers can be in an accordion geometry bent to prevent 'channeling' of the particles due to accidental alignment of their track with the module axis. This technology has the advantage of being modular and inexpensive to the point where the construction work may be divided among groups the size of typical university physics departments. This test run if a proof-of-principle and allows the experiment to improve the design and performance of the final detectors. The experimenters have constructed prototypes of three different designs in order to investigate the characteristics of practical devices such as uniformity, linearity, longitudinal and transverse shower shapes. The first design is an array of 4 x 4 modules intended as a prototype for a practical device to be installed within two years in the STAR experimental hall. The modules are a combination of a spaghetti calorimeter and an accordion (hence 'spacordion'). Each sub-module is 1.44 cm x 1.44 cm x 15 cm and constructed individually. The second design is a prototype of 4 sub-modules constructed in one step, using a different construction technique. The third design is a set of single sub-modules each intended to test variations of the tungsten powder/embedded fiber concept by enhancing the light output/density using liquid scintillator or heavy liquids.

  14. Facies analysis of the Caballero Formation and the Andrecito Member of the Lake Valley Formation (Mississippian): implications for Waulsortian bioherm inception, Alamo Canyon area, Sacramento Mountains, New Mexico

    E-Print Network [OSTI]

    Byrd, Thomas Martin

    1989-01-01T23:59:59.000Z

    -500 0-350 0-850 0-500 0-1600 0-60 0-300 m Q. CL m te (h Ie Osagian Lake Valley Formation Dona Ana Mbr. Arcente Mbr. Tierra Blanca Mbr. Nunn Mbr. Alamogordo Mbr. Andrecito Mbr. 0-150 0-200 0-140 0-120 0-350 0-85 Devonian...) paleoenvironmental analysis of the Caballero Formation, and the Andrecito, Alamogordo, Nunn, and Tierra Blanca Members. Further studies by Blount (1985), George (1985), and Morey (1985) concentrated on Caballero and Andrecito facies in smaller outcrop areas...

  15. Superfund explanation of significant difference for the record of decision (EPA Region 3): Fairchild, Intel, and Raytheon Sites, (Mew Study Area), Mountain View, CA, September 1990

    SciTech Connect (OSTI)

    NONE

    1995-02-01T23:59:59.000Z

    The purpose of the document is to explain the significant differences between the Record of Decision (ROD) signed by the U.S. Environmental Protection Agency (EPA) on June 9, 1989 (PB90-118225) and the remedy that will be implemented at the Middlefield/Ellis/Whisman Study Area (MEW Site). The document provides a brief background on the MEW Site, describes the change to the ROD that EPA is now making and explains the ways in which this change affects implementation of the remedy selected by EPA in June of 1989.

  16. TUNGSTEN--2001 80.1 By Kim B. Shedd

    E-Print Network [OSTI]

    , electrical, heating, and welding applications. Tungsten is also used to make heavy-metal alloys for armaments- temperature lubricants. U.S. apparent consumption of all tungsten materials in 2001 remained approximately

  17. TUNGSTEN--2002 80.1 By Kim B. Shedd

    E-Print Network [OSTI]

    , electrical, heating, and welding applications. Tungsten is also used to make heavy-metal alloys for armaments, high-temperature lubricants, and semiconductors. U.S. apparent consumption of all tungsten materials

  18. Growth of tungsten oxide on carbon nanowalls templates

    SciTech Connect (OSTI)

    Wang, Hua, E-mail: wanghua@dlou.edu.cn [Faculty of Chemical, Environmental and Biological Science and Technology, Dalian University of Technology, Dalian 116024 (China); College of Fisheries and Life Science, Dalian Ocean University, Dalian 116023 (China); Su, Yan [Faculty of Chemical, Environmental and Biological Science and Technology, Dalian University of Technology, Dalian 116024 (China); Chen, Shuo, E-mail: shuochen@dlut.edu.cn [Faculty of Chemical, Environmental and Biological Science and Technology, Dalian University of Technology, Dalian 116024 (China); Quan, Xie [Faculty of Chemical, Environmental and Biological Science and Technology, Dalian University of Technology, Dalian 116024 (China)

    2013-03-15T23:59:59.000Z

    Highlights: ? Tungsten oxide deposited on carbon nanowalls by hot filament chemical vapor deposition technique. ? This composite has two-dimensional uniform morphology with a crystalline structure of monoclinic tungsten trioxide. ? Surface photoelectric voltage measurements show that this product has photoresponse properties. - Abstract: In the present work we present a simple approach for coupling tungsten oxide with carbon nanowalls. The two-dimensional carbon nanowalls with open boundaries were grown using plasma enhanced hot filament chemical vapor deposition, and the subsequent tungsten oxide growth was performed in the same equipment by direct heating of a tungsten filament. The tungsten oxide coating is found to have uniform morphology with a crystalline structure of monoclinic tungsten trioxide. Surface photoelectric voltage measurements show that this product has photoresponse properties. The method of synthesis described here provides an operable route to the production of two-dimensional tungsten oxide nanocomposites.

  19. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: In 1998, little if any tungsten concentrate was produced from U.S. mines.

    E-Print Network [OSTI]

    184 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: In 1998, little if any tungsten concentrate was produced from U.S. mines. Approximately 10 companies in the United States processed tungsten concentrates, ammonium paratungstate, tungsten oxide, and

  20. Element 74, the Wolfram Versus Tungsten Controversy

    SciTech Connect (OSTI)

    Holden,N.E.

    2008-08-11T23:59:59.000Z

    Two and a quarter centuries ago, a heavy mineral ore was found which was thought to contain a new chemical element called heavy stone (or tungsten in Swedish). A few years later, the metal was separated from its oxide and the new element (Z=74) was called wolfram. Over the years since that time, both the names wolfram and tungsten were attached to this element in various countries. Sixty years ago, IUPAC chose wolfram as the official name for the element. A few years later, under pressure from the press in the USA, the alternative name tungsten was also allowed by IUPAC. Now the original, official name 'wolfram' has been deleted by IUPAC as one of the two alternate names for the element. The history of this controversy is described here.

  1. TUNGSTEN--2000 81.1 By Kim B. Shedd

    E-Print Network [OSTI]

    TUNGSTEN--2000 81.1 TUNGSTEN By Kim B. Shedd Domestic survey data and tables were prepared by Jason T. Collins, statistical assistant, and the world production table was prepared by Glenn J. Wallace, international data coordinator. Tungsten is a whitish-gray metal with many unique properties and a wide variety

  2. Rocky Mountain Contact Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    3700 Loveland, CO 80539-3003 970-461-7200 Toll Free: 1-800-472-2306 Rocky Mountain Organizational Chart and phone numbers Merchant Manager: 970-240-6209 Scheduling Manager:...

  3. YUCCA MOUNTAIN SITE DESCRIPTION

    SciTech Connect (OSTI)

    A.M. Simmons

    2004-04-16T23:59:59.000Z

    The ''Yucca Mountain Site Description'' summarizes, in a single document, the current state of knowledge and understanding of the natural system at Yucca Mountain. It describes the geology; geochemistry; past, present, and projected future climate; regional hydrologic system; and flow and transport within the unsaturated and saturated zones at the site. In addition, it discusses factors affecting radionuclide transport, the effect of thermal loading on the natural system, and tectonic hazards. The ''Yucca Mountain Site Description'' is broad in nature. It summarizes investigations carried out as part of the Yucca Mountain Project since 1988, but it also includes work done at the site in earlier years, as well as studies performed by others. The document has been prepared under the Office of Civilian Radioactive Waste Management quality assurance program for the Yucca Mountain Project. Yucca Mountain is located in Nye County in southern Nevada. The site lies in the north-central part of the Basin and Range physiographic province, within the northernmost subprovince commonly referred to as the Great Basin. The basin and range physiography reflects the extensional tectonic regime that has affected the region during the middle and late Cenozoic Era. Yucca Mountain was initially selected for characterization, in part, because of its thick unsaturated zone, its arid to semiarid climate, and the existence of a rock type that would support excavation of stable openings. In 1987, the United States Congress directed that Yucca Mountain be the only site characterized to evaluate its suitability for development of a geologic repository for high-level radioactive waste and spent nuclear fuel.

  4. White Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTown ofNationwideWTEDBird, Idaho: Energy Resources JumpMeadow Lake, NewWhite

  5. Chocolate Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, click here.TelluricPower International New EnergyChippewaChocolate

  6. Socorro Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk, New York:SiG26588Ā°,Socorro County, New Mexico: Energy

  7. White Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTri GlobalJump to:Westwood Renewables Jump to:meaningWillow IWhite

  8. Jemez Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInterias SolarJaneJefferson, Iowa: Energy ResourcesJehin Co Ltd

  9. Drum Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating A Potential MicrohydroDistrict ofDongjin Semichem CoDow CorningDrive5Drum

  10. Socorro Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-f < RAPIDā€Ž |RippeyInformation SlimSloughCreekRhodePUDSocorro

  11. Mcgee Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville, Ohio: Energy8429Ā°, -88.864698Ā° Show MapMcMinnMcNary,South

  12. Augusta Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:EzfeedflagBiomass Conversions Inc Jump to: navigation,Kansas:Audubon,Ohio:Augusta

  13. Florida Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmore County,andJump to: navigation,Hydrogen

  14. Florida Mountains Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump to:ar-80m.pdfFillmore County,andJump to: navigation,HydrogenFlorida

  15. Glass Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluating AGeothermal/Exploration <Glacial Energy HoldingsGlacial LakesGlass

  16. Gas tungsten arc welder with electrode grinder

    DOE Patents [OSTI]

    Christiansen, David W. (Kennewick, WA); Brown, William F. (West Richland, WA)

    1984-01-01T23:59:59.000Z

    A welder for automated closure of fuel pins by a gas tungsten arc process in which a rotating length of cladding is positioned adjacent a welding electrode in a sealed enclosure. An independently movable axial grinder is provided in the enclosure for refurbishing the used electrode between welds.

  17. Tungsten Divertor Erosion in all Metal Devices: Lessons from the ITER-Like Wall of JET and the All Tungsten ASDEX Upgrade

    E-Print Network [OSTI]

    Tungsten Divertor Erosion in all Metal Devices: Lessons from the ITER-Like Wall of JET and the All Tungsten ASDEX Upgrade

  18. Sean Hewitt Wild Mountain Thyme

    E-Print Network [OSTI]

    Robertson, Stephen

    SeĀ“an Hewitt Wild Mountain Thyme Christmas day. We're all at my gran's house, The full, Catholic notes to Wild Mountain Thyme, And our voices warm And swell around The sunken armchair left Empty since

  19. Mountain Home Well - Photos

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Shervais, John

    The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Mountain Home drill hole is located along the western plain and documents older basalts overlain by sediment. Data submitted by project collaborator Doug Schmitt, University of Alberta

  20. Repository site data report for unsaturated tuff, Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    Tien, P.L.; Updegraff, C.D.; Siegel, M.D.; Wahi, K.K.; Guzowski, R.V.

    1985-11-01T23:59:59.000Z

    The US Department of Energy is currently considering the thick sequences of unsaturated, fractured tuff at Yucca Mountain, on the southwestern boundary of the Nevada Test Site, as a possible candidate host rock for a nuclear-waste repository. Yucca Mountain is in one of the most arid areas in the United States. The site is within the south-central part of the Great Basin section of the Basin and Range physiographic province and is located near a number of silicic calderas of Tertiary age. Although localized zones of seismic activity are common throughout the province, and faults are present at Yucca Mountain, the site itself is basically aseismic. No data are available on the composition of ground water in the unsaturated zone at Yucca Mountain. It has been suggested that the composition is bounded by the compositions of water from wells USW-H3, UE25p-1, J-13, and snow or rain. There are relatively few data available from Yucca Mountain on the moisture content and saturation, hydraulic conductivity, and characteristic curves of the unsaturated zone. The available literature on thermomechanical properties of tuff does not always distinguish between data from the saturated zone and data from the unsaturated zone. Geochemical, hydrologic, and thermomechanical data available on the unsaturated tuffs of Yucca Mountain are tabulated in this report. Where the data are very sparse, they have been supplemented by data from the saturated zone or from areas other than Yucca Mountain. 316 refs., 58 figs., 37 tabs.

  1. Transportation cask decontamination and maintenance at the potential Yucca Mountain repository; Yucca Mountain Site characterization project

    SciTech Connect (OSTI)

    Hartman, D.J.; Miller, D.D. [Bechtel National, Inc., San Francisco, CA (United States); Hill, R.R. [Sandia National Labs., Albuquerque, NM (United States)

    1992-04-01T23:59:59.000Z

    This study investigates spent fuel cask handling experience at existing nuclear facilities to determine appropriate cask decontamination and maintenance operations at the potential Yucca Mountain repository. These operations are categorized as either routine or nonroutine. Routine cask decontamination and maintenance tasks are performed in the cask preparation area at the repository. Casks are taken offline to a separate cask maintenance area for major nonroutine tasks. The study develops conceptual designs of the cask preparation area and cask maintenance area. The functions, layouts, and major features of these areas are also described.

  2. GREEN MOUNTAIN MORRIS DANCERS

    E-Print Network [OSTI]

    Mountain (boys) and Maple Leaf (girls) will be recruiting new members in January 2009, typically 6th grade to Chris.Levey@dartmouth.edu. Morris dancing is an energetic stick clashing, bell ringing, handkerchief, 2008: New England Folk Festival (NEFFA) Perform Saturday 3-4pm at the main entrance. May 1, 2008

  3. Controlled nanostructuration of polycrystalline tungsten thin films

    SciTech Connect (OSTI)

    Girault, B. [Institut P' (UPR 3346 CNRS), Universite de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Institut de Recherche en Genie Civil et Mecanique (UMR CNRS 6183), LUNAM Universite, Universite de Nantes, Centrale Nantes, CRTT, 37 Bd de l'Universite, BP 406, 44602 Saint-Nazaire Cedex (France); Eyidi, D.; Goudeau, P.; Guerin, P.; Bourhis, E. Le; Renault, P.-O. [Institut P' (UPR 3346 CNRS), Universite de Poitiers, ENSMA, Bd Pierre et Marie Curie, 86962 Futuroscope Cedex (France); Sauvage, T. [CEMHTI/CNRS (UPR 3079 CNRS), Universite d'Orleans, 3A rue de la Ferollerie, 45071 Orleans Cedex 2 (France)

    2013-05-07T23:59:59.000Z

    Nanostructured tungsten thin films have been obtained by ion beam sputtering technique stopping periodically the growing. The total thickness was maintained constant while nanostructure control was obtained using different stopping periods in order to induce film stratification. The effect of tungsten sublayers' thicknesses on film composition, residual stresses, and crystalline texture evolution has been established. Our study reveals that tungsten crystallizes in both stable {alpha}- and metastable {beta}-phases and that volume proportions evolve with deposited sublayers' thicknesses. {alpha}-W phase shows original fiber texture development with two major preferential crystallographic orientations, namely, {alpha}-W<110> and unexpectedly {alpha}-W<111> texture components. The partial pressure of oxygen and presence of carbon have been identified as critical parameters for the growth of metastable {beta}-W phase. Moreover, the texture development of {alpha}-W phase with two texture components is shown to be the result of a competition between crystallographic planes energy minimization and crystallographic orientation channeling effect maximization. Controlled grain size can be achieved for the {alpha}-W phase structure over 3 nm stratification step. Below, the {beta}-W phase structure becomes predominant.

  4. Tungsten-dependent formaldehyde ferredoxin oxidoreductase: Reaction mechanism from quantum chemical calculations

    E-Print Network [OSTI]

    Liao, Rongzhen

    Tungsten-dependent formaldehyde ferredoxin oxidoreductase: Reaction mechanism from quantum chemical theory Enzyme catalysis Formaldehyde ferredoxin oxidoreductase from Pyrococcus furiosus is a tungsten the formaldehyde substrate binds directly to the tungsten ion. WVI =O then performs a nucleophilic attack

  5. Molybdenum and Tungsten Monoalkoxide Pyrrolide (MAP) Alkylidene Complexes That Contain a 2,6-Dimesitylphenylimido

    E-Print Network [OSTI]

    Müller, Peter

    Molybdenum and Tungsten Monoalkoxide Pyrrolide (MAP) Alkylidene Complexes That Contain a 2 ABSTRACT: Molybdenum and tungsten bispyrrolide alkyli- dene complexes that contain a 2 those that contain 2,5-dimethylpyrro- lide are pyridine free. Molybdenum and tungsten MAP 2

  6. Investigation of coronal plasma dynamics in tungsten and carbon X-pinches

    E-Print Network [OSTI]

    Madden, Robert Edward

    2008-01-01T23:59:59.000Z

    Coronal Plasma Dynamics in Tungsten and Carbon X-pinches ACoronal Plasma Dynamics in Tungsten and Carbon X-pinches byformation in 2- and 4-wire tungsten x-pinches using an 80

  7. CRITICAL FIELD FOR SUPERCONDUCTIVITY AND LOW-TEMPERATURE NORMAL-STATE HEAT CAPACITY OF TUNGSTEN

    E-Print Network [OSTI]

    Triplett, B.B.

    2008-01-01T23:59:59.000Z

    NORMAL-STATE HEAT CAPACITY OF TUNGSTEN B. B. Triplett, N. E.State Heat Capacity of Tungsten* B. n. Triplett,t N. E.I. ;\\feasurement Properties of tungsten sa~ples. ~feasured

  8. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: In 1997, little if any tungsten concentrate was produced from U.S. mines.

    E-Print Network [OSTI]

    182 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production in a significant decrease in mine production. The amount of tungsten concentrates remaining in stockpiles in China for the tungsten industry. Once the stockpiles are depleted, world mine production will have to increase to meet

  9. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: Limited shipments of tungsten concentrates were made from a California mine in

    E-Print Network [OSTI]

    178 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and primary products, wrought and unwrought tungsten, and waste and scrap: China, 43%; Germany, 11%; Canada,630 1,450 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  10. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A tungsten mine in California produced concentrates in 2012. Approximately eight

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 45,200 3,630 1,610 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  11. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: One mine in California produced tungsten concentrates in 2010. Approximately

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production. Import Sources (2006­09): Tungsten contained in ores and concentrates, intermediate and primary products, Trends, and Issues: World tungsten supply is dominated by Chinese production and exports. China

  12. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A mine in California produced tungsten concentrates in 2009. Approximately eight

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production. Import Sources (2005-08): Tungsten contained in ores and concentrates, intermediate and primary products, and Issues: World tungsten supply was dominated by Chinese production and exports. China's Government limited

  13. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A mine in California restarted operations and made its first shipment of tungsten

    E-Print Network [OSTI]

    182 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and primary products, wrought and unwrought tungsten, and waste and scrap: China, 43%; Canada, 16%; Germany, 9 by Chinese production and exports. China's Government restricted the amounts of tungsten that could

  14. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded production of tungsten concentrates in the United States was in

    E-Print Network [OSTI]

    182 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded production of tungsten concentrates in the United States was in 1994 of ores and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste

  15. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded production of tungsten concentrates in the United States was in

    E-Print Network [OSTI]

    178 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded production of tungsten concentrates in the United States was in 1994. In 2000, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 39%; Russia, 21

  16. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: A tungsten mine in California produced concentrates in 2013. Approximately eight

    E-Print Network [OSTI]

    174 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 45,100 2,300 2,240 Events, Trends, and Issues: World tungsten supply was dominated by Chinese production

  17. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: One mine in California produced tungsten concentrates in 2011. Approximately

    E-Print Network [OSTI]

    176 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production (2007­10): Tungsten contained in ores and concentrates, intermediate and primary products, wrought: World tungsten supply is dominated by Chinese production and exports. China's Government regulates its

  18. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 5, Part B: Chapter 8, Sections 8.3.1.5 through 8.3.1.17

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Sections 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the SOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules.

  19. Site characterization plan: Yucca Mountain Site, Nevada Research and Development Area, Nevada: Volume 8, Part B: Chapter 8, Sections 8.4 through 8.7; Glossary and Acronyms

    SciTech Connect (OSTI)

    NONE

    1988-12-01T23:59:59.000Z

    This site characterization plan (SCP) has been developed for the candidate repository site at Yucca Mountain in the State of Nevada. The SCP includes a description of the Yucca Mountain site (Chapters 1-5), a conceptual design for the repository (Chapter 6), a description of the packaging to be used for the waste to be emplaced in the repository (Chapter 7), and a description of the planned site characterization activities (Chapter 8). The schedules and milestones presented in Section 8.3 and 8.5 of the SCP were developed to be consistent with the June 1988 draft Amendment to the DOE`s Mission Plan for the Civilian Radioactive Waste Management Program. The five month delay in the scheduled start of exploratory shaft construction that was announced recently is not reflected in these schedules. 88 figs., 42 tabs.

  20. Tungsten Cluster Migration on Nanoparticles: Minimum Energy Pathway...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Pathway and Migration Mechanism. Tungsten Cluster Migration on Nanoparticles: Minimum Energy Pathway and Migration Mechanism. Abstract: Transition state searches have been...

  1. alkaline tungsten matrix: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thermonuclear Experimental Reactor Organization, Cadarache, FRANCE 3 Plasma Science and Fusion Thermonuclear Experimental Reactor). Tungsten (W) is the plasma-facing material of...

  2. anthocyanins facilitate tungsten: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Thermonuclear Experimental Reactor Organization, Cadarache, FRANCE 3 Plasma Science and Fusion Thermonuclear Experimental Reactor). Tungsten (W) is the plasma-facing material of...

  3. Synthesis of Molybdenum and Tungsten Alkylidene Complexes That Contain Sterically Demanding Arenethiolate Ligands

    E-Print Network [OSTI]

    Müller, Peter

    Synthesis of Molybdenum and Tungsten Alkylidene Complexes That Contain Sterically Demanding,4 we decided to explore some arylthiolate analogues of terphenoxide molybde- num imido and tungsten

  4. Ecosystems of MongoliaEcosystems of Mongolia The vast area of the country contains a

    E-Print Network [OSTI]

    1 Ecosystems of MongoliaEcosystems of Mongolia The vast area of the country contains a great array Desert steppe Desert ecosystems MainMain ecosystems of Mongolia High mountain ecosystemsHigh mountain ecosystems High mountain occupies 4.48% of the total territory of Mongolia. Mountain forest ecosystems

  5. Enhanced photoelectrochemical properties of TiO{sub 2} by codoping with tungsten and silver

    SciTech Connect (OSTI)

    Khan, Matiullah, E-mail: matiullahustb@gmail.com [Department of Inorganic Nonmetallic Materials, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Department of Physics, Kohat University of Science and Technology (KUST), Kohat 26000 (Pakistan); Jiang, Peng; Cao, Wenbin, E-mail: wbcao@ustb.edu.cn [Department of Inorganic Nonmetallic Materials, School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Li, Jing [State Key Laboratory of Advanced Metallurgy, University of Science and Technology Beijing, Beijing 100083 (China)

    2014-04-21T23:59:59.000Z

    The Tungsten (W) and Silver (Ag) codoped TiO{sub 2} samples were successfully synthesized by hydrothermal method without any post calcination. To understand the correlation between electronic structure and photocatalytic properties, the synthesized samples were characterized using X-ray diffraction, Brunauer–Emmett–Teller specific surface area, transmission electron microscopy, ultra-violet–visible absorption spectra, and X-ray photoelectron spectroscopy (XPS), and the photocatalytic properties were evaluated under visible light irradiations. Codoping could not induce any changes in the phase and all the synthesized samples displayed pure anatase phase with spherical morphology. Visible light absorptions of the codoped samples were dramatically improved compared to the corresponding mono-doped samples. XPS analysis indicated that the dopant atoms successfully entered the TiO{sub 2} network. Results from the visible light photodegradation experiments showed that tungsten-silver codoped TiO{sub 2} possessed strong ability in photo-degrading methylene blue compared to tungsten doped TiO{sub 2} and silver doped TiO{sub 2}, which was attributed to the smaller particle size, higher specific surface area, enhanced visible light absorption, and improved separation of photogenerated carriers.

  6. Tungsten silicide and tungsten polycide anisotropic dry etch process for highly controlled dimensions and profiles

    E-Print Network [OSTI]

    Bashir, Rashid

    dimensions and profiles R. Bashir,a),b) A. E. Kabir,b) F. Hebert,c) and C. Brackenb) National Semiconductors. In many applications a spacer needs to be formed on the polycide sidewall Fig. 1 . Undesirable undercutting can re- sult in nonideal spacer formation for further device fabrica- tion. Tungsten silicide

  7. Yucca Mountain Biological Resources Monitoring Program; Annual report, FY91

    SciTech Connect (OSTI)

    NONE

    1992-01-01T23:59:59.000Z

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of 1982 (as amended in 1987) to study and characterize Yucca Mountain as a possible site for a geologic repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a repository. To ensure that site characterization activities (SCA) do not adversely affect the Yucca Mountain area, an environmental program has been implemented to monitor and mitigate potential impacts and to ensure that activities comply with applicable environmental regulations. This report describes the activities and accomplishments during fiscal year 1991 (FY91) for six program areas within the Terrestrial Ecosystem component of the YMP environmental program. The six program areas are Site Characterization Activities Effects, Desert Tortoises, Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  8. TungsTen--2004 79. Referencesthatincludeasectionmark()arefoundintheInternet

    E-Print Network [OSTI]

    TungsTen--2004 79. Referencesthatincludeasectionmark(§)arefoundintheInternet ReferencesCitedsection. TungsTen ByKimB.shedd Domestic survey data and tables were prepared by Amy C. Tolcin, statistical assistant, and the world production table was prepared by Glenn J. Wallace, international data coordinator

  9. Rail Access to Yucca Mountain: Critical Issues

    SciTech Connect (OSTI)

    Halstead, R. J.; Dilger, F.; Moore, R. C.

    2003-02-25T23:59:59.000Z

    The proposed Yucca Mountain repository site currently lacks rail access. The nearest mainline railroad is almost 100 miles away. Absence of rail access could result in many thousands of truck shipments of spent nuclear fuel and high-level radioactive waste. Direct rail access to the repository could significantly reduce the number of truck shipments and total shipments. The U.S. Department of Energy (DOE) identified five potential rail access corridors, ranging in length from 98 miles to 323 miles, in the Final Environmental Impact Statement (FEIS) for Yucca Mountain. The FEIS also considers an alternative to rail spur construction, heavy-haul truck (HHT) delivery of rail casks from one of three potential intermodal transfer stations. The authors examine the feasibility and cost of the five rail corridors, and DOE's alternative proposal for HHT transport. The authors also address the potential for rail shipments through the Las Vegas metropolitan area.

  10. Kinetics of the decomposition of tungsten hexacarbonyl

    SciTech Connect (OSTI)

    Podoprigora, V.I.; Baev, A.K.

    1987-07-20T23:59:59.000Z

    A differential-flow apparatus is devised for the study of the kinetics of the thermal decomposition of volatile metal carbonyls under quasi-stationary conditions. The applicability of the general kinetic approach to the investigation of the thermodecomposition of carbonyl compounds and of the analysis of the experimental data on the basis of specific thermodecomposition rates was proved. Well-founded kinetic characteristics were obtained for the first time for the thermodecomposition of tungsten carbonyl in the kinetic region and under quasi-stationary pyrolysis conditions.

  11. Low temperature photoresponse of monolayer tungsten disulphide

    SciTech Connect (OSTI)

    Cao, Bingchen; Shen, Xiaonan; Shang, Jingzhi; Cong, Chunxiao; Yang, Weihuang; Eginligil, Mustafa, E-mail: yuting@ntu.edu.sg, E-mail: meginligil@ntu.edu.sg [Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore, 637371 (Singapore); Yu, Ting, E-mail: yuting@ntu.edu.sg, E-mail: meginligil@ntu.edu.sg [Division of Physics and Applied Physics, School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore, 637371 (Singapore); Department of Physics, Faculty of Science, National University of Singapore, Singapore, 117542 (Singapore); Graphene Research Centre, National University of Singapore, Singapore, 117546 (Singapore)

    2014-11-01T23:59:59.000Z

    High photoresponse can be achieved in monolayers of transition metal dichalcogenides. However, the response times are inconveniently limited by defects. Here, we report low temperature photoresponse of monolayer tungsten disulphide prepared by exfoliation and chemical vapour deposition (CVD) method. The exfoliated device exhibits n-type behaviour; while the CVD device exhibits intrinsic behaviour. In off state, the CVD device has four times larger ratio of photoresponse for laser on/off and photoresponse decay–rise times are 0.1 s (limited by our setup), while the exfoliated device has few seconds. These findings are discussed in terms of charge trapping and localization.

  12. Corrosion and wear resistance of tungsten carbide-cobalt and tungsten carbide-cobalt-chromium thermal spray coatings

    SciTech Connect (OSTI)

    Quets, J.; Alford, J.R.

    1999-07-01T23:59:59.000Z

    Tungsten carbide thermal spray coatings provide wear surfaces to new and overhauled components for various industries. Their wear resistance is obtained by incorporating small tungsten carbide particles into a metal matrix. This presentation will show what parameters influence their corrosion resistance in the ASTM B-117 Salt Spray Corrosion Test,

  13. Mountain hydrology of the western United States Roger C. Bales,1

    E-Print Network [OSTI]

    California at Santa Barbara, University of

    Mountain hydrology of the western United States Roger C. Bales,1 Noah P. Molotch,2,3 Thomas H, population growth, and land use change drive the need for new hydrologic knowledge and understanding. In the mountainous West and other similar areas worldwide, three pressing hydrologic needs stand out: first

  14. Mountainous | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere I Geothermal Pwer Plant JumpMarysville,Missoula,MontereyHill,Spurr Geothermal ProjectMountainous Jump to:

  15. Tungsten Transport in JET H-mode Plasmas in Hybrid Scenario, Experimental Observations and Modelling

    E-Print Network [OSTI]

    Tungsten Transport in JET H-mode Plasmas in Hybrid Scenario, Experimental Observations and Modelling

  16. Author's personal copy Tungsten geochemistry and implications for understanding the Earth's interior

    E-Print Network [OSTI]

    Mcdonough, William F.

    Author's personal copy Tungsten geochemistry and implications for understanding the Earth Keywords: tungsten uranium basalt core mantle concentration ratio The concentration of tungsten (W of tungsten (W) was sequestered into the core (Jagoutz et al., 1979; Sun, 1982; Newsom and Palme, 1984

  17. Failure Modes of Vacuum Plasma Spray Tungsten Coating Created on Carbon Fibre Composites under Thermal Loads

    E-Print Network [OSTI]

    Failure Modes of Vacuum Plasma Spray Tungsten Coating Created on Carbon Fibre Composites under Thermal Loads

  18. TUNGSTEN--2003 79.1 References that include a section mark () are found in the Internet

    E-Print Network [OSTI]

    Stockpile (NDS) and increases in stocks held by U.S. industry. No U.S. tungsten mine production was reported reported in 2001. Salient U.S. tungsten statistics and world tungsten concentrate production for 2003TUNGSTEN--2003 79.1 1 References that include a section mark (§) are found in the Internet

  19. The Pahrump Valley Museum Yucca Mountain History Exhibit - 12389

    SciTech Connect (OSTI)

    Voegele, Michael; McCracken, Robert [Consultant, Nye County Nuclear Waste Repository Project Office (United States); Herrera, Troy [Sambooka Group, Reno, NV. (United States)

    2012-07-01T23:59:59.000Z

    As part of its management of the Yucca Mountain project, the Department of Energy maintained several information centers to provide public access to information about the status of the Yucca Mountain project. Those information centers contained numerous displays, historical information, and served as the location for the Department's outreach activities. As the Department of Energy dealt with reduced budgets in 2009 following the Obama Administration's intent to terminate the program, it shut down its information centers. Nye County considered it important to maintain a public information center where people would be able to find information about what was happening with the Yucca Mountain project. Initially the Nye County assumed responsibility for the information center in Pahrump; eventually the County made a decision to move that information center into an expansion of the existing Pahrump Valley Museum. Nye County undertook an effort to update the information about the Yucca Mountain project and modernize the displays. A parallel effort to create a source of historical information where people could find out about the Yucca Mountain project was undertaken. To accompany the Yucca Mountain exhibits in the Pahrump Valley Museum, Nye County also sponsored a series of interviews to document, through oral histories, as much information about the Yucca Mountain project as could be found in these interviews. The paper presents an overview of the Yucca Mountain exhibits in the Pahrump Valley Museum, and the accompanying oral histories. An important conclusion that can be drawn from the interviews is that construction of a repository in Nevada should have been conceptualized as but the first step in transforming the economy of central Nevada by turning part of the Nevada National Security Site and adjoining area into a world-class energy production and energy research center. (authors)

  20. Yucca Mountain biological resources monitoring program; Annual report FY92

    SciTech Connect (OSTI)

    NONE

    1993-02-01T23:59:59.000Z

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of 1982 (as amended in 1987) to study and characterize Yucca Mountain as a potential site for a geologic repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a potential repository. To ensure that site characterization activities (SCA) do not adversely affect the environment at Yucca Mountain, an environmental program has been implemented to monitor and mitigate potential impacts and ensure activities comply with applicable environmental regulations. This report describes the activities and accomplishments of EG&G Energy Measurements, Inc. (EG&G/EM) during fiscal year 1992 (FY92) for six program areas within the Terrestrial Ecosystem component of the YMP environmental program. The six program areas are Site Characterization Effects, Desert Tortoises, Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  1. Preparation and electrocatalytic activity of tungsten carbide and titania nanocomposite

    SciTech Connect (OSTI)

    Hu, Sujuan; Shi, Binbin; Yao, Guoxing [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China)] [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China); Li, Guohua, E-mail: nanozjut@zjut.edu.cn [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China)] [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China); Ma, Chunan [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China)] [State Key Laboratory Breeding Base of Green Chemistry Synthesis Technology, School of Chemical Engineering and Materials Science, Zhejiang University of Technology, Hangzhou 310032 (China)

    2011-10-15T23:59:59.000Z

    Graphical abstract: The electrocatalytic activity of tungsten carbide and titania nanocomposite is related to the structure, crystal phase and chemical components of the nanocomposite, and is also affected by the property of electrolyte. A synergistic effect exists between tungsten carbide and titania of the composite. Highlights: {yields} Electrocatalytic activity of tungsten carbide and titania nanocomposite with core-shell structure. {yields} Activity is related to the structure, crystal phase and chemical component of the nanocomposite. {yields} The property of electrolyte affects the electrocatalytic activity. {yields} A synergistic effect exists between tungsten carbide and titania of the composite. -- Abstract: Tungsten carbide and titania nanocomposite was prepared by combining a reduced-carbonized approach with a mechanochemical approach. The samples were characterized by X-ray diffraction, transmission electron microscope under scanning mode and X-ray energy dispersion spectrum. The results show that the crystal phases of the samples are composed of anatase, rutile, nonstoichiometry titanium oxide, monotungsten carbide, bitungsten carbide and nonstoichiometry tungsten carbide, and they can be controlled by adjusting the parameters of the reduced-carbonized approach; tungsten carbide particles decorate on the surface of titania support, the diameter of tungsten carbide particle is smaller than 20 nm and that of titania is around 100 nm; the chemical components of the samples are Ti, O, W and C. The electrocatalytic activity of the samples was measured by a cyclic voltammetry with three electrodes. The results indicate that the electrocatalytic activities of the samples are related to their crystal phases and the property of electrolyte in aqueous solution. A synergistic effect between titania and tungsten carbide is reported for the first time.

  2. An investigation of the relationships between mountain waves and clear air turbulence encountered by the XB-70 airplane in the stratosphere

    E-Print Network [OSTI]

    Incrocci, Thomas Paul

    1970-01-01T23:59:59.000Z

    . . . . . . . . , . . . ~ . ~ INTRODUCTION BACKGROUND TO THE PROBLEM Theory of Mountain Waves Mountain Waves and Clear Air Turbulence (CAT). Page iv v vi viii The Vertical Propagation and Transfer of Energy of Mountain Waves into the Stratosphere The Influence of Wind... and the prevailing wind directions favorable for the development of extensive mountain wave activity in the surrounding areas (Wind directions taken from Harrison and Sowa, 1966). 24 Nid-tropospheric conditions for 1200 GNT on 19 March 1966 28 Nid...

  3. Tungsten-doped thin film materials

    DOE Patents [OSTI]

    Xiang, Xiao-Dong; Chang, Hauyee; Gao, Chen; Takeuchi, Ichiro; Schultz, Peter G.

    2003-12-09T23:59:59.000Z

    A dielectric thin film material for high frequency use, including use as a capacitor, and having a low dielectric loss factor is provided, the film comprising a composition of tungsten-doped barium strontium titanate of the general formula (Ba.sub.x Sr.sub.1-x)TiO.sub.3, where X is between about 0.5 and about 1.0. Also provided is a method for making a dielectric thin film of the general formula (Ba.sub.x Sr.sub.1-x)TiO.sub.3 and doped with W, where X is between about 0.5 and about 1.0, a substrate is provided, TiO.sub.2, the W dopant, Ba, and optionally Sr are deposited on the substrate, and the substrate containing TiO.sub.2, the W dopant, Ba, and optionally Sr is heated to form a low loss dielectric thin film.

  4. Heat transfer in gas tungsten arc welding

    SciTech Connect (OSTI)

    Smartt, H.B.; Stewart, J.A.; Einerson, C.J.

    1986-05-01T23:59:59.000Z

    The heat transferred from an electrode negative, argon gas tungsten arc to an anode has been measured for a wide range of conditions suitable for mechanized welding applications. The results are given as (1) the arc efficiency; and (2) the anode heat and current input distribution functional shapes and radii for various anode materials and groove shapes over a wide range of current and voltage, using different electrode geometries, as well as both He and Ar-He shielding gases. The nominal arc is Gaussian with a diameter of about 4 mm and a heat transfer efficiency to the anode of about 75%. Variations from these values are discussed in terms of current knowledge of the electrical and thermal energy transport mechanisms. A new method of measuring the heat transferred from the arc to the anode, using a boiling liquid nitrogen calorimeter, has been developed which gives rapid, accurate values.

  5. TUNGSTEN--1999 80.1 By Kim B. Shedd

    E-Print Network [OSTI]

    , and/or contacts are used in lighting, electronic, electrical, heating, and welding applications and coatings. Chemical uses of tungsten include catalysts, inorganic pigments, and high-temperature lubricants

  6. TUNGSTEN--1998 80.1 By Kim B. Shedd

    E-Print Network [OSTI]

    , and/or contacts are used in lighting, electronic, electrical, heating, and welding applications and coatings. Chemical uses of tungsten include catalysts, inorganic pigments, and high-temperature lubricants

  7. Atomistic computer simulation analysis of nanocrystalline nickel-tungsten alloys

    E-Print Network [OSTI]

    Engwall, Alison Michelle

    2009-01-01T23:59:59.000Z

    Nanocrystalline nickel-tungsten alloys are harder, stronger, more resistant to degradation, and safer to electrodeposit than chromium. Atomistic computer simulations have previously met with success in replicating the ...

  8. Microstructured tungsten thermophotovoltaic selective emitters c by Natalija (Zorana) Jovanovi?.

    E-Print Network [OSTI]

    Jovanovic, Natalija Zorana

    2008-01-01T23:59:59.000Z

    This research investigates the fabrication, modeling, characterization, and application of tungsten two-dimensional (2D) photonic crystal (PhC) structures as selective emitters and means of achieving higher efficiencies ...

  9. Alkyne metathesis by molybdenum and tungsten alkylidyne complexes

    E-Print Network [OSTI]

    Schrock, Richard Royce

    Alkyne metathesis by molybdenum and tungsten alkylidyne complexes is now ~45 years old. Progress in the practical aspects of alkyne metathesis reactions with well-defined complexes, as well as applications, in the last ...

  10. Tungsten carbide-cobalt by Three Dimensional Printing

    E-Print Network [OSTI]

    Kelley, Andrew, III

    1998-01-01T23:59:59.000Z

    Three Dimensional Printing is an additive manufacturing process for rapid prototyping ceramic and metallic parts [Sachs, et al, 1990]. Green (not sintered) tungsten carbide-cobalt parts must have a density greater than 50% ...

  11. Surface Coating of Tungsten Carbide by Electric Exploding of Contact

    SciTech Connect (OSTI)

    Grigoryev, Evgeny G. [General Physics Department, Moscow Engineering Physics Institute, Kashirskoe sh. 31, Moscow, 115409 (Russian Federation)

    2011-01-17T23:59:59.000Z

    Electric exploding of a tungsten carbide--cobalt material near-by high-speed steel surface forms on it a hardening coating. The essential structure properties of the formed coatings are determined by parameters of contact exploding electrode at the pulse current amplitude from above 106 A/cm2 and duration less than 10-4 s. The metallographic investigations of coating structures were done by microscope 'Neophot-24'. They have shown that the contact electric exploding caused the transfer of tungsten carbide and cobalt on the surface of high-speed steel. The breakdown of tungsten carbide--cobalt material took place during electrical exploding. The hardening layers of tungsten carbide and pure nanocrystalline tungsten have been formed upon the surface of high-speed steel as a result of electric exploding. Crystalline grains of tungsten have an almost spherical form and their characteristic size less than 400 nanometers. Micro hardness of the coating layers and high-speed steel structures was measured.

  12. ROCKY MOUNTAIN OILFIELD TESTING CENTER

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to SPT for modifications and re-testing. A 4-12" cased well at the Rocky Mountain Oilfield Testing Center (RMOTC) in Casper Wyoming was selected. The well conditions were:...

  13. Mountain Health Choices Beneficiary Report

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    ................................................................................................................ 42 I. Access to Health Care Mountain Health Choices Beneficiary Report A Report to the West Virginia Bureau for Medical of Health and Human Resources, Bureau for Medical Services. #12; 1 Table of Contents I. EXECUTIVE

  14. Rocky Mountain Power- Net Metering

    Broader source: Energy.gov [DOE]

    Idaho does not have a statewide net-metering policy. However, each of the state's three investor-owned utilities -- Avista Utilities, Idaho Power and Rocky Mountain Power -- has a net-metering...

  15. Rocky Great Mountains Southwest Plains

    E-Print Network [OSTI]

    Rocky Great Mountains Southwest Plains Research Note RM.502 January 1991 USDA Forest Service Rocky),Carbondale, IL.2 Propellant is now solely available through Winn- Star, Inc. (WSI),Marion, IL.,2which also

  16. Green Mountain Power- Solar GMP

    Broader source: Energy.gov [DOE]

    Green Mountain Power, an investor-owned electric utility operating in Vermont, offers a credit to customers with net-metered photovoltaic (PV) systems. In addition to the benefits of net metering,...

  17. The FIA BioSum model was used to simulate three fire-hazard-reduction policies in an area comprising northern California. southwestern Oregon. and the east slopes of the Cascade Mountains in Oregon. The policy

    E-Print Network [OSTI]

    Fried, Jeremy S.

    The FIA BioSum model was used to simulate three fire-hazard-reduction policies in an area. The policy scenarios. all subject to a stand-scale fire-hazard-reduction effectiveness constraint. included merchantable timber removal (Min Merch). Differences in the area treated under each scenario were considerable

  18. Nevada Geothermal Power Company, Inc. (Blue Mountain) | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal Power Company, Inc. (Blue Mountain) Nevada Geothermal...

  19. Field trip guide to selected outcrops, Arbuckle Mountains, Oklahoma

    SciTech Connect (OSTI)

    NONE

    1991-11-17T23:59:59.000Z

    The Arbuckle Mountains, named for Brigadier General Matthew Arbuckle, are located in south-central Oklahoma. The formations that comprise the Arbuckle Mountains have been extensively studied for hydrocarbon source rock and reservoir rock characteristics that can be applied to the subsurface in the adjacent Anadarko and Ardmore basins. Numerous reports and guidebooks have been written concerning the Arbuckle Mountains. A few important general publications are provided in the list of selected references. The purpose of this handout is to provide general information on the geology of the Arbuckle Mountains and specific information on the four field trip stops, adapted from the literature. The four stops were at: (1) Sooner Rock and Sand Quarry; (2) Woodford Shale; (3) Hunton Anticline and Hunton Quarry; and (4) Tar Sands of Sulfur Area. As part of this report, two papers are included for more detail: Paleomagnetic dating of basinal fluid migration, base-metal mineralization, and hydrocarbon maturation in the Arbuckle Mountains, Oklahoma and Laminated black shale-bedded chert cyclicity in the Woodford Formation, southern Oklahoma.

  20. Effects of Tungsten Oxide Addition on the Electrochemical Performance of Nanoscale Tantalum Oxide-Based Electrocatalysts for Proton Exchange Membrane PEM Fuel Cells

    SciTech Connect (OSTI)

    Oh, Tak Keun; Kim, Jin Yong; Shin, Yongsoon; Engelhard, Mark H.; Weil, K. Scott

    2011-08-01T23:59:59.000Z

    In the present study, the properties of a series of non-platinum based nanoscale tantalum oxide/tungsten oxide-carbon composite catalysts was investigated for potential use in catalyzing the oxygen reduction reaction (ORR) on the cathode side of a PEM fuel cell membrane electrode assembly. Electrochemical performance was measured using a half-cell test set up with a rotating disc electrode and compared with a commercial platinum-on-carbon (Pt/C) catalyst. Overall, all of the oxide-based composite catalysts exhibit high ORR on-set potentials, comparable to that of the baseline Pt/C catalyst. The addition of tungsten oxide as a dopant to tantalum oxide greatly improved mass specific current density. Maximum performance was achieved with a catalyst containing 32 mol% of tungsten oxide, which exhibited a mass specific current density ~8% that of the Pt/C catalyst at 0.6 V vs. the normal hydrogen electrode (NHE) and ~35% that of the Pt/C catalyst at 0.2 V vs. NHE. Results from X-ray photoelectron spectroscopy analysis indicated that the tungsten cations in the composite catalysts exist in the +6 oxidation state, while the tantalum displays an average valence of +5, suggesting that the addition of tungsten likely creates an oxygen excess in the tantalum oxide structure that influences its oxygen absorption kinetics. When the 32mol% tungsten doped catalyst loading on the working electrode was increased to five times that of the original loading (which was equivalent to that of the baseline Pt/C catalyst), the area specific current density improved four fold, achieving an area specific current density ~35% that of the Pt/C catalyst at 0.6 V vs. NHE.

  1. Low-temperature chemical vapor deposition of tungsten from tungsten hexacarbonyl

    SciTech Connect (OSTI)

    Vogt, G.J.

    1982-04-01T23:59:59.000Z

    Chemical vapor deposition (CVD) of tungsten from W(CO)/sub 6/ has been investigated below 670 K as an alternate process to WF/sub 6/ CVD for coating glass microspheres. The major advantages of W(CO)/sub 6/ CVD are the elimination of the HF damage to the glass microspheres and potentially a lower deposition temperature for coating DT-filled microspheres. W(CO)/sub 6/ CVD can be utilized, in principle, to coat the microspheres with 1 to 5 ..mu..m of tungsten or to flash coat the microspheres for further coating by WF/sub 6/ CVD. Test coatings were deposited in a fluidized-bed reactor with a hydrogen carrier gas. The coatings were found to contain nearly equal portions of carbon and oxygen, ranging from 16 to 25 at.% for each element. The high carbon and oxygen concentrations are believed to result principally from the physical entrapment of chemisorbed CO molecules at the surface of the growing deposit. The general quality and adhesion of the W(CO)/sub 6/-derived coatings are unsatisfactory at this time for ICF applications.

  2. Crystalline mesoporous tungsten oxide nanoplate monoliths synthesized by directed soft template method for highly sensitive NO{sub 2} gas sensor applications

    SciTech Connect (OSTI)

    Hoa, Nguyen Duc, E-mail: ndhoa@itims.edu.vn [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST) (Viet Nam); Duy, Nguyen Van [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST) (Viet Nam)] [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST) (Viet Nam); Hieu, Nguyen Van, E-mail: hieu@itims.edu.vn [International Training Institute for Materials Science (ITIMS), Hanoi University of Science and Technology (HUST) (Viet Nam)

    2013-02-15T23:59:59.000Z

    Graphical abstract: Display Omitted Highlights: ? Mesoporous WO{sub 3} nanoplate monoliths were obtained by direct templating synthesis. ? Enable effective accession of the analytic molecules for the sensor applications. ? The WO{sub 3} sensor exhibited a high performance to NO{sub 2} gas at low temperature. -- Abstract: Controllable synthesis of nanostructured metal oxide semiconductors with nanocrystalline size, porous structure, and large specific surface area is one of the key issues for effective gas sensor applications. In this study, crystalline mesoporous tungsten oxide nanoplate-like monoliths with high specific surface areas were obtained through instant direct-templating synthesis for highly sensitive nitrogen dioxide (NO{sub 2}) sensor applications. The copolymer soft template was converted into a solid carbon framework by heat treatment in an inert gas prior to calcinations in air to sustain the mesoporous structure of tungsten oxide. The multidirectional mesoporous structures of tungsten oxide with small crystalline size, large specific surface area, and superior physical characteristics enabled the rapid and effective accession of analytic gas molecules. As a result, the sensor response was enhanced and the response and recovery times were reduced, in which the mesoporous tungsten oxide based gas sensor exhibited a superior response of 21,155% to 5 ppm NO{sub 2}. In addition, the developed sensor exhibited selective detection of low NO{sub 2} concentration in ammonia and ethanol at a low temperature of approximately 150 °C.

  3. PHYSICAL REVIEW B 84, 092102 (2011) Melting temperature of tungsten from two ab initio approaches

    E-Print Network [OSTI]

    Alfč, Dario

    2011-01-01T23:59:59.000Z

    PHYSICAL REVIEW B 84, 092102 (2011) Melting temperature of tungsten from two ab initio approaches L the melting temperature of tungsten by two ab initio approaches. The first approach can be divided into two

  4. Structure-property Relationships in Pure and Doped Epitaxial Tungsten Trioxide Thin Films

    E-Print Network [OSTI]

    Structure-property Relationships in Pure and Doped Epitaxial Tungsten Trioxide Thin Films Principal-property relationships of well- defined epitaxial tungsten trioxide (WO3) films with and without dopants, and thereby

  5. Olefin Metathesis Reactions Initiated by d2 Molybdenum or Tungsten Complexes

    E-Print Network [OSTI]

    Müller, Peter

    Olefin Metathesis Reactions Initiated by d2 Molybdenum or Tungsten Complexes Richard R. Schrock species, behave as olefin metathesis catalysts. Recently we reported tungsten complexes that contain a Wd

  6. Room-Temperature Z-Selective Homocoupling of alpha-Olefins by Tungsten Catalysts

    E-Print Network [OSTI]

    Marinescu, Smaranda C.

    3,5-Dimethylphenylimido complexes of tungsten can be prepared using procedures analogous to those employed for other tungsten catalysts, as can bispyrrolide species and MonoAryloxide-Pyrrolide (MAP) species. Homocouplings ...

  7. The effect of tungsten and molybdenum additions on the cavitation corrosion behavior of duplex stainless steel (DSS) in seawater

    SciTech Connect (OSTI)

    Al-Hashem, A.; Abdullah, A.; Shalaby, H.M. [Kuwait Inst. for Scientific Research, Safat (Kuwait). Materials Application Dept.

    1998-12-31T23:59:59.000Z

    Cavitation corrosion studies were conducted on two duplex stainless steel (DSS) specimens of which one was containing tungsten and more molybdenum than the other. Experiments were conducted in seawater using an ultrasonically-induced cavitation facilities. The rate of mass-loss, free corrosion potential, and microscopic examinations were compared for the two alloys in the presence and absence of cavitation. There was negligible mass loss for the two alloys under stagnant conditions. However, some differences were observed between the two alloys with respect to mass-loss, corrosion potential and morphology of attacked areas. The alloy containing tungsten and mover molybdenum experienced more loss in weight regardless of their more noble corrosion potential during cavitation. This difference in behavior was explained in terms of the effect of the alloying elements on the microstructure of the alloys and their susceptibility to absorb the impact energy of cavitation.

  8. Assessment of industrial minerals and rocks in the controlled area

    SciTech Connect (OSTI)

    Castor, S.B. [Nevada Bureau of Mines and Geology, Reno, NV (United States); Lock, D.E. [Mackay School of Mines, Reno, NV (United States)

    1996-08-01T23:59:59.000Z

    Yucca Mountain in Nye County, Nevada, is a potential site for a permanent repository for high-level nuclear waste in Miocene ash flow tuff. The Yucca Mountain controlled area occupies approximately 98 km{sup 2} that includes the potential repository site. The Yucca Mountain controlled area is located within the southwestern Nevada volcanic field, a large area of Miocene volcanism that includes at least four major calderas or cauldrons. It is sited on a remnant of a Neogene volcanic plateau that was centered around the Timber Mountain caldera complex. The Yucca Mountain region contains many occurrences of valuable or potentially valuable industrial minerals, including deposits with past or current production of construction aggregate, borate minerals, clay, building stone, fluorspar, silicate, and zeolites. The existence of these deposits in the region and the occurrence of certain mineral materials at Yucca Mountain, indicate that the controlled area may have potential for industrial mineral and rock deposits. Consideration of the industrial mineral potential within the Yucca Mountain controlled area is mainly based on petrographic and lithologic studies of samples from drill holes in Yucca Mountain. Clay minerals, zeolites, fluorite, and barite, as minerals that are produced economically in Nevada, have been identified in samples from drill holes in Yucca Mountain.

  9. A history of tungsten- and molybdenum-base alloys

    SciTech Connect (OSTI)

    Heestand, R.L.

    1993-01-01T23:59:59.000Z

    The development of tungsten and molybdenum alloys was initiated in the early 1900s in search of a better electric lamp filament with tantalum, tungsten, rhenium, and osmium being the prime candidates. The efforts required for accomplishment of the task led to refining oxides to high purity, reduction of the oxides to metal powders, forming green product forms by extrusion or pressing, and finally sintering by electric furnace and self-heating by direct current almost to the melting point. The technology required for producing lamp filaments led to the development of the powder metallurgy field and early research on high-melting-temperature metals. During the period 1909 through 1959, most of the tungsten-molybdenum, high-melting-temperature element alloys were developed and produced in almost any product form required.

  10. A history of tungsten- and molybdenum-base alloys

    SciTech Connect (OSTI)

    Heestand, R.L.

    1993-05-01T23:59:59.000Z

    The development of tungsten and molybdenum alloys was initiated in the early 1900s in search of a better electric lamp filament with tantalum, tungsten, rhenium, and osmium being the prime candidates. The efforts required for accomplishment of the task led to refining oxides to high purity, reduction of the oxides to metal powders, forming green product forms by extrusion or pressing, and finally sintering by electric furnace and self-heating by direct current almost to the melting point. The technology required for producing lamp filaments led to the development of the powder metallurgy field and early research on high-melting-temperature metals. During the period 1909 through 1959, most of the tungsten-molybdenum, high-melting-temperature element alloys were developed and produced in almost any product form required.

  11. Mechanism of vacancy formation induced by hydrogen in tungsten

    SciTech Connect (OSTI)

    Liu, Yi-Nan [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing, 100191 (China) [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing, 100191 (China); Association EURATOM-TEKES, University of Helsinki, Helsinki, PO Box 64, 00560 (Finland); Ahlgren, T.; Bukonte, L.; Nordlund, K. [Association EURATOM-TEKES, University of Helsinki, Helsinki, PO Box 64, 00560 (Finland)] [Association EURATOM-TEKES, University of Helsinki, Helsinki, PO Box 64, 00560 (Finland); Shu, Xiaolin; Yu, Yi; Lu, Guang-Hong, E-mail: LGH@buaa.edu.cn [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing, 100191 (China)] [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing, 100191 (China); Li, Xiao-Chun [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)] [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, Anhui, 230031 (China)

    2013-12-15T23:59:59.000Z

    We report a hydrogen induced vacancy formation mechanism in tungsten based on classical molecular dynamics simulations. We demonstrate the vacancy formation in tungsten due to the presence of hydrogen associated directly with a stable hexagonal self-interstitial cluster as well as a linear crowdion. The stability of different self-interstitial structures has been further studied and it is particularly shown that hydrogen plays a crucial role in determining the configuration of SIAs, in which the hexagonal cluster structure is preferred. Energetic analysis has been carried out to prove that the formation of SIA clusters facilitates the formation of vacancies. Such a mechanism contributes to the understanding of the early stage of the hydrogen blistering in tungsten under a fusion reactor environment.

  12. Ductile tungsten-nickel alloy and method for making same

    DOE Patents [OSTI]

    Snyder, Jr., William B. (Knoxville, TN)

    1976-01-01T23:59:59.000Z

    The present invention is directed to a ductile, high-density tungsten-nickel alloy which possesses a tensile strength in the range of 100,000 to 140,000 psi and a tensile elongation of 3.1 to 16.5 percent in 1 inch at 25.degree.C. This alloy is prepared by the steps of liquid phase sintering a mixture of tungsten-0.5 to 10.0 weight percent nickel, heat treating the alloy at a temperature above the ordering temperature of approximately 970.degree.C. to stabilize the matrix phase, and thereafter rapidly quenching the alloy in a suitable liquid to maintain the matrix phase in a metastable, face-centered cubic, solid- solution of tungsten in nickel.

  13. Tungsten as first wall material in the main chamber of ASDEX Upgrade

    E-Print Network [OSTI]

    Tungsten as first wall material in the main chamber of ASDEX Upgrade V. Rohde, R. Neu, A. Geier, R material is tungsten, which has a high melting point, low erosion rate in cold scrape off layer plasma, where the present ITER-FEAT design uses tungsten. No negative influence on the plasma performance, even

  14. DOI: 10.1002/adsc.201100200 Preparation of Tungsten-Based Olefin Metathesis Catalysts

    E-Print Network [OSTI]

    Müller, Peter

    DOI: 10.1002/adsc.201100200 Preparation of Tungsten-Based Olefin Metathesis Catalysts Supported://dx.doi.org/10.1002/adcs.201100200. Abstract: A new tungsten alkylidene complex, WACHTUNGTRENNUNG catalysts; tungsten Introduction In the last dozen years various "well-defined" Mo/W[1] or Ru[2] olefin

  15. ORIGINAL PAPER Why is the molybdenum-substituted tungsten-dependent

    E-Print Network [OSTI]

    Liao, Rongzhen

    ORIGINAL PAPER Why is the molybdenum-substituted tungsten-dependent formaldehyde ferredoxin oxidoreductase is a tungsten-dependent enzyme that catalyzes the oxidative degradation of formaldehyde to formic acid. The moly- bdenum ion can be incorporated into the active site to displace the tungsten ion

  16. Syntheses of Tungsten tert-Butylimido and Adamantylimido Alkylidene Complexes Employing Pyridinium Chloride As the Acid

    E-Print Network [OSTI]

    Müller, Peter

    Syntheses of Tungsten tert-Butylimido and Adamantylimido Alkylidene Complexes Employing Pyridinium Supporting Information ABSTRACT: Routes to new tungsten alkylidene complexes that contain tert and tungsten, especially aryls that are mono- or disubstituted in the ortho position(s).2 However, it has

  17. Single-Crystal Tungsten Oxide Nanosheets: Photochemical Water Oxidation in the Quantum Confinement Regime

    E-Print Network [OSTI]

    Osterloh, Frank

    Single-Crystal Tungsten Oxide Nanosheets: Photochemical Water Oxidation in the Quantum Confinement, catalysis, WO3, tungsten oxide, nanosheet, nanocrystal, quantum confinement, solar energy conversion INTRODUCTION Tungsten trioxide crystallizes in the ReO3 structure type and is an n-type semiconductor with a 2

  18. Synthesis and Reactions of Tungsten Alkylidene Complexes That Contain the 2,6-Dichlorophenylimido Ligand

    E-Print Network [OSTI]

    Müller, Peter

    Synthesis and Reactions of Tungsten Alkylidene Complexes That Contain the 2,6-Dichlorophenylimido Institute of Technology, Cambridge, Massachusetts 02139 ReceiVed October 30, 2006 Tungsten alkylidene alkylidene bisalkoxide complexes of molybdenum or tungsten of the type M(NR)(CHR)(OR)2 are now established

  19. Imido Alkylidene Bispyrrolyl Complexes of Tungsten Thorsten Kreickmann, Stefan Arndt, Richard R. Schrock,* and Peter Muller

    E-Print Network [OSTI]

    Müller, Peter

    Imido Alkylidene Bispyrrolyl Complexes of Tungsten Thorsten Kreickmann, Stefan Arndt, Richard R, Massachusetts 02139 ReceiVed July 16, 2007 We have prepared tungsten bispyrrolyl (Pyr) or bis-2 this type of chemistry to tungsten. In this paper we report W(NR)(CHCMe2R)(pyrrolyl)2 complexes where R is 2

  20. Nanostructured tungsten carbide catalysts for polymer electrolyte fuel cells X. G. Yanga

    E-Print Network [OSTI]

    Nanostructured tungsten carbide catalysts for polymer electrolyte fuel cells X. G. Yanga and C. Y/air polymer electrolyte fuel cell using nanoscale tungsten carbide as the anode catalyst and carbon supported, thereby creating a fundamental technology to reduce the cost of future fuel cell engines. The tungsten

  1. Radial x-ray diffraction of tungsten tetraboride to 86 GPa under nonhydrostatic compression

    E-Print Network [OSTI]

    Lin, Jung-Fu "Afu"

    Radial x-ray diffraction of tungsten tetraboride to 86 GPa under nonhydrostatic compression Lun December 2012; published online 16 January 2013) Investigations of the equation of state of tungsten moduli and hardness exceed- ing or closing that of diamond. Tungsten tetraboride (WB4) is a candidate

  2. Z-Selective Olefin Metathesis Reactions Promoted by Tungsten Oxo Alkylidene Complexes

    E-Print Network [OSTI]

    Müller, Peter

    Z-Selective Olefin Metathesis Reactions Promoted by Tungsten Oxo Alkylidene Complexes Dmitry V). Early in the development of olefin metathesis catalysts that contain tungsten, it was shown that metathetically more active and reproducible systems were produced when tungsten oxo complexes were deliberately

  3. Compressibility and strength of nanocrystalline tungsten boride under compression to 60GPa

    E-Print Network [OSTI]

    Duffy, Thomas S.

    Compressibility and strength of nanocrystalline tungsten boride under compression to 60GPa Haini://jap.aip.org/about/rights_and_permissions #12;Compressibility and strength of nanocrystalline tungsten boride under compression to 60 GPa Haini of nanocrystalline tungsten boride (WB) were investigated using radial x-ray diffraction (RXRD) in a diamond

  4. Synthesis of Tungsten Imido Alkylidene Complexes that Contain an Electron-Withdrawing Imido Ligand

    E-Print Network [OSTI]

    Müller, Peter

    Synthesis of Tungsten Imido Alkylidene Complexes that Contain an Electron-Withdrawing Imido Ligand 02467, United States *S Supporting Information ABSTRACT: Tungsten NArR alkylidene complexes have been is the nature of Z. Perhaps the most dramatic variations are those in which M is tungsten and Z is an oxo ligand

  5. Mechanism of tungsten-dependent acetylene hydratase from quantum chemical calculations

    E-Print Network [OSTI]

    Liao, Rongzhen

    Mechanism of tungsten-dependent acetylene hydratase from quantum chemical calculations Rong hydratase is a tungsten-dependent enzyme that cata- lyzes the nonredox hydration of acetylene metalloenzyme cluster approach Tungsten is the heaviest metal in biology and plays prominent roles in carbon

  6. Real-time growth rate metrology for a tungsten chemical vapor deposition process by acoustic sensing

    E-Print Network [OSTI]

    Rubloff, Gary W.

    to a production-scale tungsten chemical vapor deposition cluster tool for in situ process sensing. Process gasesReal-time growth rate metrology for a tungsten chemical vapor deposition process by acoustic to achieve run-to-run process control of the deposited tungsten film thickness. © 2001 American Vacuum

  7. The Corrosion of Tungsten During Irradiation in an 800 MeV Proton Beam

    E-Print Network [OSTI]

    such technology is Accelerator Production of Tritium (APT). In APT a tungsten target is bombarded by a high energyThe Corrosion of Tungsten During Irradiation in an 800 MeV Proton Beam R. Scott Lillard, Darryl P of solid neutron spallation targets such as tungsten (W), and target cladding or structural materials

  8. METEOROLOGYMETEOROLOGYMETEOROLOGYMETEOROLOGY 280280280280 Intro to Mountain MeteorologyIntro to Mountain MeteorologyIntro to Mountain MeteorologyIntro to Mountain Meteorology

    E-Print Network [OSTI]

    Clements, Craig

    and mesoscale wind and precipitation processes in mountainous terrain. 3. the surface energy budgets that lead and behavior evaluate mountain weather impacts on snow pack behavior Required Texts/Readings Mountain review and a term paper. Assignments will include both in-class and take home components and will include

  9. C HAPTE R 9 Klamath Mountains Bioregion

    E-Print Network [OSTI]

    Taylor, Alan

    reporting sta- tions are located above 1,000 m (3,280 ft). Although most precipitation falls between October precipitation. Generally, less precipitation falls in valleys and canyons than in the sur- rounding uplands Mountain Marble Mountains S Sawyers Bar outh China Mountain TrinityR. T

  10. Material Mixing of Tungsten with Carbon and Helium

    SciTech Connect (OSTI)

    Ueda, Y.; Lee, H. T. [Graduate School of Engineering, Osaka University, 2-1 Yamada-Oka, Suita, Osaka 565-0871 (Japan)

    2010-05-20T23:59:59.000Z

    In ITER, graphite and tungsten are used for divertor materials and are mixed through erosion, transport, and redeposition. Helium, a fusion reactant, is an intrinsic element in fusion plasmas that impinges on the metallic wall materials to form He bubbles. W-C mixed layers and He bubble layers greatly affect tritium retention. In this paper, impacts of W-C material mixing on erosion and hydrogen isotope retention are reviewed. Then, recent results on carbon deposition on tungsten in TEXTOR tokamak and helium effects on blistering and retention are discussed.

  11. Production And Characterization Of Tungsten-Based Positron Moderators

    SciTech Connect (OSTI)

    Lucio, O. G. de; Morales, J. G.; Cruz-Manjarrez, H. [Instituto de Fisica, Universidad Nacional Autonoma de Mexico, Apartado Postal 20-364 01000, Mexico DF (Mexico)

    2011-06-01T23:59:59.000Z

    Experiments of interest in Atomic Physics require production of well-defined low-energy positron beams through a moderation process of high-energy positrons, which can be produced by either the use of a radioactive source or by accelerator based pair production process. Tungsten is one of the most commonly used moderator materials because of its reasonable efficiency, high work function and relatively low cost. In this work we present different methods to produce tungsten-based candidate moderators in a variety of shapes. We also present results from characterizing these candidate moderators by ion beam analysis and microscopy techniques.

  12. POTENTAIL HABITAT MOUNTAIN PLOVERS

    E-Print Network [OSTI]

    that is bordered by I-25 to the east, property boundaries to the north and west, and the power plant to the south cover of yucca and cholla on hills characterize the area bordered by the solar evaporation ponds by the guard shack to the south, the plant to the west, and I-25 to the east is potential habitat. This town

  13. Effects of sequential tungsten and helium ion implantation on nano-indentation hardness of tungsten

    SciTech Connect (OSTI)

    Armstrong, D. E. J.; Edmondson, P. D.; Roberts, S. G. [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom)] [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom)

    2013-06-24T23:59:59.000Z

    To simulate neutron and helium damage in a fusion reactor first wall sequential self-ion implantation up to 13 dpa followed by helium-ion implantation up to 3000 appm was performed to produce damaged layers of {approx}2 {mu}m depth in pure tungsten. The hardness of these layers was measured using nanoindentation and was studied using transmission electron microscopy. Substantial hardness increases were seen in helium implanted regions, with smaller hardness increases in regions which had already been self-ion implanted, thus, containing pre-existing dislocation loops. This suggests that, for the same helium content, helium trapped in distributed vacancies gives stronger hardening than helium trapped in vacancies condensed into dislocation loops.

  14. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2006,

    E-Print Network [OSTI]

    178 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2006, approximately. Import Sources (2002-05): Tungsten contained in ores and concentrates, intermediate and primary products

  15. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2003,

    E-Print Network [OSTI]

    180 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2003, approximately and concentrates, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 49

  16. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2005,

    E-Print Network [OSTI]

    182 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2005, approximately. Import Sources (2001-04): Tungsten contained in ores and concentrates, intermediate and primary products

  17. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded U.S. production of tungsten concentrates was in 1994. In 2001,

    E-Print Network [OSTI]

    180 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last recorded U.S. production of tungsten concentrates was in 1994. In 2001, approximately, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 41%; Russia, 21

  18. (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2002,

    E-Print Network [OSTI]

    182 TUNGSTEN (Data in metric tons of tungsten content, unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2002, approximately, intermediate and primary products, wrought and unwrought tungsten, and waste and scrap: China, 48%; Russia, 16

  19. (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2004,

    E-Print Network [OSTI]

    180 TUNGSTEN (Data in metric tons of tungsten content unless otherwise noted) Domestic Production and Use: The last reported U.S. production of tungsten concentrates was in 1994. In 2004, approximately (2000-03): Tungsten content of ores and concentrates, intermediate and primary products, wrought

  20. Rocky Mountain Basins Produced Water Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Historical records for produced water data were collected from multiple sources, including Amoco, British Petroleum, Anadarko Petroleum Corporation, United States Geological Survey (USGS), Wyoming Oil and Gas Commission (WOGC), Denver Earth Resources Library (DERL), Bill Barrett Corporation, Stone Energy, and other operators. In addition, 86 new samples were collected during the summers of 2003 and 2004 from the following areas: Waltman-Cave Gulch, Pinedale, Tablerock and Wild Rose. Samples were tested for standard seven component "Stiff analyses", and strontium and oxygen isotopes. 16,035 analyses were winnowed to 8028 unique records for 3276 wells after a data screening process was completed. [Copied from the Readme document in the zipped file available at http://www.netl.doe.gov/technologies/oil-gas/Software/database.html] Save the Zipped file to your PC. When opened, it will contain four versions of the database: ACCESS, EXCEL, DBF, and CSV formats. The information consists of detailed water analyses from basins in the Rocky Mountain region.

  1. Tungsten and tungsten alloy powder metallurgy: Powder production and applications excluding lamps. (Latest citations from the US Patent bibliographic file with exemplary claims). Published Search

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The bibliography contains citations of selected patents concerning the preparation of metallic and ceramic powders of tungsten and tungsten alloys, including applications of these materials. The hydrogen reduction of tungsten compounds together with alloying element compounds produce forms with characteristics of high density, hardness, wear resistance, high melting points, and abrasiveness. Topics include production of cathodes, heaters, filament wires, electrical contacts, acoustic absorbers, high-density sheets and coatings, hard penetrators, and tungsten carbide and metallized ceramics. (Contains a minimum of 109 citations and includes a subject term index and title list.)

  2. Novel Reactor Design and Metrology Study for Tungsten ALD process

    E-Print Network [OSTI]

    Rubloff, Gary W.

    species Viscous flow condition Short gas residence time Fast gas switching Reactant + carrier gas Multiple Operation Modes Exposure Purge Small reactor volume Throttle Valve 5 torr 10-5 Torr carrier gas 5 torr 10Novel Reactor Design and Metrology Study for Tungsten ALD process Laurent Henn-Lecordier, Wei Lei

  3. Retention of Hydrogen Isotopes in Neutron Irradiated Tungsten

    SciTech Connect (OSTI)

    Yuji Hatano; Masashi Shimada; Yasuhisa Oya; Guoping Cao; Makoto Kobayashi; Masanori Hara; Brad J. Merrill; Kenji Okuno; Mikhail A. Sokolov; Yutai Katoh

    2013-03-01T23:59:59.000Z

    To investigate the effects of neutron irradiation on hydrogen isotope retention in tungsten, disk-type specimens of pure tungsten were irradiated in the High Flux Isotope Reactor in Oak Ridge National Laboratory followed by exposure to high flux deuterium (D) plasma in Idaho National Laboratory. The results obtained for low dose n-irradiated specimens (0.025 dpa for tungsten) are reviewed in this paper. Irradiation at coolant temperature of the reactor (around 50 degrees C) resulted in the formation of strong trapping sites for D atoms. The concentrations of D in n-irradiated specimens were ranging from 0.1 to 0.4 mol% after exposure to D plasma at 200 and 500 degrees C and significantly higher than those in non-irradiated specimens because of D-trapping by radiation defects. Deep penetration of D up to a depth of 50-100 µm was observed at 500 degrees C. Release of D in subsequent thermal desorption measurements continued up to 900 degrees C. These results were compared with the behaviour of D in ion-irradiated tungsten, and distinctive features of n-irradiation were discussed.

  4. Tungsten-yttria carbide coating for conveying copper

    DOE Patents [OSTI]

    Rothman, Albert J. (Livermore, CA)

    1993-01-01T23:59:59.000Z

    A method is provided for providing a carbided-tungsten-yttria coating on the interior surface of a copper vapor laser. The surface serves as a wick for the condensation of liquid copper to return the condensate to the interior of the laser for revolatilization.

  5. Author's personal copy Tungsten in Hawaiian picrites: A compositional model

    E-Print Network [OSTI]

    Mcdonough, William F.

    form 15 April 2009; available online 3 May 2009 Abstract Concentrations of tungsten (W) and uranium (U is three-times as enriched as the Depleted MORB Mantle (DMM; 3.0 Ā± 2.3 ng/g). The relatively high of the recycling of W-rich oceanic crust and sediment into a depleted mantle source, such as the depleted MORB

  6. Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons

    SciTech Connect (OSTI)

    Z. Zak Fang, H. Y. Sohn

    2009-03-10T23:59:59.000Z

    This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

  7. Pitfalls of tungsten multileaf collimator in proton beam therapy

    SciTech Connect (OSTI)

    Moskvin, Vadim; Cheng, Chee-Wai; Das, Indra J. [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana 46202 (United States) and Indiana University Health Proton Therapy Center (Formerly Midwest Proton Radiotherapy Institute), Bloomington, Indiana 47408 (United States)

    2011-12-15T23:59:59.000Z

    Purpose: Particle beam therapy is associated with significant startup and operational cost. Multileaf collimator (MLC) provides an attractive option to improve the efficiency and reduce the treatment cost. A direct transfer of the MLC technology from external beam radiation therapy is intuitively straightforward to proton therapy. However, activation, neutron production, and the associated secondary cancer risk in proton beam should be an important consideration which is evaluated. Methods: Monte Carlo simulation with FLUKA particle transport code was applied in this study for a number of treatment models. The authors have performed a detailed study of the neutron generation, ambient dose equivalent [H*(10)], and activation of a typical tungsten MLC and compared with those obtained from a brass aperture used in a typical proton therapy system. Brass aperture and tungsten MLC were modeled by absorber blocks in this study, representing worst-case scenario of a fully closed collimator. Results: With a tungsten MLC, the secondary neutron dose to the patient is at least 1.5 times higher than that from a brass aperture. The H*(10) from a tungsten MLC at 10 cm downstream is about 22.3 mSv/Gy delivered to water phantom by noncollimated 200 MeV beam of 20 cm diameter compared to 14 mSv/Gy for the brass aperture. For a 30-fraction treatment course, the activity per unit volume in brass aperture reaches 5.3 x 10{sup 4} Bq cm{sup -3} at the end of the last treatment. The activity in brass decreases by a factor of 380 after 24 h, additional 6.2 times after 40 days of cooling, and is reduced to background level after 1 yr. Initial activity in tungsten after 30 days of treating 30 patients per day is about 3.4 times higher than in brass that decreases only by a factor of 2 after 40 days and accumulates to 1.2 x 10{sup 6} Bq cm{sup -3} after a full year of operation. The daily utilization of the MLC leads to buildup of activity with time. The overall activity continues to increase due to {sup 179}Ta with a half-life of 1.82 yr and thus require prolonged storage for activity cooling. The H*(10) near the patient side of the tungsten block is about 100 {mu}Sv/h and is 27 times higher at the upstream side of the block. This would lead to an accumulated dose for therapists in a year that may exceed occupational maximum permissible dose (50 mSv/yr). The value of H*(10) at the upstream surface of the tungsten block is about 220 times higher than that of the brass. Conclusions: MLC is an efficient way for beam shaping and overall cost reduction device in proton therapy. However, based on this study, tungsten seems to be not an optimal material for MLC in proton beam therapy. Usage of tungsten MLC in clinic may create unnecessary risks associated with the secondary neutrons and induced radioactivity for patients and staff depending on the patient load. A careful selection of material for manufacturing of an optimal MLC for proton therapy is thus desired.

  8. Yucca Mountain Biological Resources Monitoring Program; Progress report, October 1992--December 1993

    SciTech Connect (OSTI)

    NONE

    1994-05-01T23:59:59.000Z

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of (as amended in 1987) to study and characterize the suitability of Yucca Mountain as a potential geologic repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a potential repository. To ensure that site characterization activities do not adversely affect the environment at Yucca Mountain, a program has been implemented to monitor and mitigate potential impacts and ensure activities comply with applicable environmental regulations. This report describes the activities and accomplishments of EG&G Energy Measurements, Inc. (EG&G/EM) from October 1992 through December 1993 for six program areas within the Terrestrial Ecosystem component of the environmental program for the Yucca Mountain Site Characterization Project (YMP): Site Characterization Effects, Desert Tortoises (Gopherus agassizii), Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  9. Comparison of Bond Scission Sequence of Methanol on Tungsten Monocarbide and Pt-Modified Tungsten Monocarbide

    SciTech Connect (OSTI)

    Liu, P.; Stottlemyer, A.L.; Chen, J.G.

    2010-09-14T23:59:59.000Z

    The ability to control the bond scission sequence of O-H, C-H, and C-O bonds is of critical importance in the effective utilization of oxygenate molecules, such as in reforming reactions and in alcohol fuel cells. In the current study, we use methanol as a probe molecule to demonstrate the possibility to control the decomposition pathways by supporting monolayer coverage of Pt on a tungsten monocarbide (WC) surface. Density functional theory (DFT) results reveal that on the WC and Pt/WC surfaces CH{sub 3}OH decomposes via O-H bond scission to form the methoxy (*CH{sub 3} O) intermediate. The subsequent decomposition of methoxy on the WC surface occurs through the C-O bond scission to form *CH{sub 3}, which reacts with surface *H to produce CH{sub 4}. In contrast, the decomposition of methoxy on the Pt/WC surface favors the C-H bond scission to produce *CH{sub 2} O, which prevents the formation of the *CH{sub 3} species and leads to the formation of a *CO intermediate through subsequent deprotonation steps. The DFT predictions are validated using temperature programmed desorption to quantify the gas-phase product yields and high resolution electron energy loss spectroscopy to determine the surface intermediates from methanol decomposition on Pt, WC, and Pt/WC surfaces.

  10. TSPA Model for the Yucca Mountain Unsaturated Zone

    SciTech Connect (OSTI)

    M.L. Wilson; C.K. Ho

    2001-12-12T23:59:59.000Z

    Yucca Mountain, Nevada, is being considered as a potential site for a repository for spent nuclear fuel and high-level radioactive waste. Total-system performance-assessment (TSPA) calculations are performed to evaluate the safety of the site. Such calculations require submodels for all important engineered and natural components of the disposal system. There are five submodels related to the unsaturated zone: climate, infiltration, mountain-scale flow of water, seepage into emplacement drifts, and radionuclide transport. For each of these areas, models have been developed and implemented for use in TSPA. The climate model is very simple (a set of climate states have been deduced from paleoclimate data, and the times when climate changes occur in the future have been estimated), but the other four models make use of complex process models involving time-consuming computer runs. An important goal is to evaluate the impact of uncertainties (e.g., incomplete knowledge of the site) on the estimates of potential repository performance, so particular attention is given to the key uncertainties for each area. Uncertainties in climate, infiltration, and mountain-scale flow are represented in TSPA simulations by means of discrete high, medium, and low cases, Uncertainties in seepage and radionuclide transport are represented by means of continuous probability distributions for several key parameters.

  11. TSPA Model for the Yucca Mountain Unsaturated Zone

    SciTech Connect (OSTI)

    Wilson, M. L.; Ho, C. K.

    2002-02-26T23:59:59.000Z

    Yucca Mountain, Nevada, is being considered as a potential site for a repository for spent nuclear fuel and high-level radioactive waste. Total-system performance-assessment (TSPA) calculations are performed to evaluate the safety of the site. Such calculations require submodels for all important engineered and natural components of the disposal system. There are five submodels related to the unsaturated zone: climate, infiltration, mountain-scale flow of water, seepage into emplacement drifts, and radionuclide transport. For each of these areas, models have been developed and implemented for use in TSPA. The climate model is very simple (a set of climate states have been deduced from paleoclimate data, and the times when climate changes occur in the future have been estimated), but the other four models make use of complex process models involving time-consuming computer runs. An important goal is to evaluate the impact of uncertainties (e.g., incomplete knowledge of the site) on the estimates of potential repository performance, so particular attention is given to the key uncertainties for each area. Uncertainties in climate, infiltration, and mountain-scale flow are represented in TSPA simulations by means of discrete high, medium, and low cases. Uncertainties in seepage and radionuclide transport are represented by means of continuous probability distributions for several key parameters.

  12. Rocky Mountain Power- Energy FinAnswer

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power's Energy FinAnswer program provides incentives to help its customers improve the efficiency of existing facilities and build new facilities that are significantly more...

  13. Geothermal Energy Resource Investigations, Chocolate Mountains...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Geothermal Energy Resource Investigations, Chocolate Mountains Aerial Gunnery Range,...

  14. Rocky Mountain Power- FinAnswer Express

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power's FinAnswer Express Program provides extensive incentives and for lighting, HVAC, food service, agricultural, and compressed air equipment. Retrofits of facilities and upgrades...

  15. Rocky Mountain Power- FinAnswer Express

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power's FinAnswer Express Program includes incentives and technical assistance for lighting, HVAC and other equipment upgrades that increase energy efficiency and exceed code...

  16. Rocky Mountain Power- FinAnswer Express

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power provides incentives for its commercial and industrial customers in Idaho to retrofit their existing facilities with more efficient equipment, or install energy efficient...

  17. In vivo interactions between tungsten microneedles and peripheral nerves

    E-Print Network [OSTI]

    Pier Nicola Sergi; Winnie Jensen; Silvestro Micera; Ken Yoshida

    2013-08-02T23:59:59.000Z

    Tungsten microneedles are currently used to insert neural electrodes into living peripheral nerves. However, the biomechanics underlying these procedures is not yet well characterized. For this reason, the aim of this work was to model the interactions between these microneedles and living peripheral nerves. A simple mathematical framework was especially provided to model both compression of the external layer of the nerve (epineurium) and the interactions resulting from penetration of the main shaft of the microneedle inside the living nerves. The instantaneous Young's modulus, compression force, the work needed to pierce the tissue, puncturing pressure, and the dynamic friction coefficient between the tungsten microneedles and living nerves were quantified starting from acute experiments, aiming to reproduce the physical environment of real implantations. Indeed, a better knowledge of the interactions between microneedles and peripheral nerves may be useful to improve the effectiveness of these insertion techniques, and could represent a key factor for designing robot-assisted procedures tailored for peripheral nerve insertion.

  18. Development of positron annihilation spectroscopy for characterizing neutron irradiated tungsten

    SciTech Connect (OSTI)

    C.N. Taylor; M. Shimada; D.W. Akers; M.W. Drigert; B.J. Merrill; Y. Hatano

    2013-05-01T23:59:59.000Z

    Tungsten samples (6 mm diameter, 0.2 mm thick) were irradiated to 0.025 and 0.3 dpa with neutrons in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory. Samples were then exposed to deuterium plasma in the tritium plasma experiment (TPE) at 100, 200 and 500ŗC to a total fluence of 1 x 1026 m-2. Nuclear reaction analysis (NRA) and Doppler broadening positron annihilation spectroscopy (DB-PAS) were performed at various stages to characterize damage and retention. We present the first known results of neutron damaged tungsten characterized by DB-PAS in order to study defect concentration. Two positron sources, 22Na and 68Ge, probe ~58 µm and through the entire 200 µm thick samples, respectively. DB-PAS results reveal clear differences between the various irradiated samples. These results, and the calibration of DB-PAS to NRA data are presented.

  19. Studies on nickel-tungsten oxide thin films

    SciTech Connect (OSTI)

    Usha, K. S. [Department of Physics, Alagappa University, Karaikudi - 630 004 (India); Sivakumar, R., E-mail: krsivakumar1979@yahoo.com [Directorate of Distance Education, Alagappa University, Karaikudi - 630 004 (India); Sanjeeviraja, C. [Department of Physics, Alagappa Chettiar College of Engineering and Technology, Karaikudi - 630 004 (India)

    2014-10-15T23:59:59.000Z

    Nickel-Tungsten oxide (95:5) thin films were prepared by rf sputtering at 200W rf power with various substrate temperatures. X-ray diffraction study reveals the amorphous nature of films. The substrate temperature induced decrease in energy band gap with a maximum transmittance of 71%1 was observed. The Micro-Raman study shows broad peaks at 560 cm{sup ?1} and 1100 cm{sup ?1} correspond to Ni-O vibration and the peak at 860 cm{sup ?1} can be assigned to the vibration of W-O-W bond. Photoluminescence spectra show two peaks centered on 420 nm and 485 nm corresponding to the band edge emission and vacancies created due to the addition of tungsten, respectively.

  20. Gas-tungsten arc welding of aluminum alloys

    DOE Patents [OSTI]

    Frye, Lowell D. (Kingston, TN)

    1984-01-01T23:59:59.000Z

    A gas-tungsten arc welding method for joining together structures formed of aluminum alloy with these structures disposed contiguously to a heat-damagable substrate of a metal dissimilar to the aluminum alloy. The method of the present invention is practiced by diamond machining the fay surfaces of the aluminum alloy structures to provide a mirror finish thereon having a surface roughness in the order of about one microinch. The fay surfaces are aligned and heated sufficiently by the tungsten electrode to fuse the aluminum alloy contiguous to the fay surfaces to effect the weld joint. The heat input used to provide an oxide-free weld is significantly less than that required if the fay surfaces were prepared by using conventional chemical and mechanical practices.

  1. Gas-tungsten arc welding of aluminum alloys

    DOE Patents [OSTI]

    Frye, L.D.

    1982-03-25T23:59:59.000Z

    The present invention is directed to a gas-tungsten arc welding method for joining together structures formed of aluminum alloy with these structures disposed contiguously to a heat-damagable substrate of a metal dissimilar to the aluminum alloy. The method of the present invention is practiced by diamond machining the fay surfaces of the aluminum alloy structures to profice a mirror finish thereon having a surface roughness in the order of about one microinch. The fay surface are aligned and heated sufficiently by the tungsten electrode to fuse the aluminum alloy continguous to the fay surfaces to effect the weld joint. The heat input used to provide an oxide-free weld is significantly less than that required if the fay surfaces were prepared by using conventional chemical and mechanical practices.

  2. Gas-tungsten arc welding of aluminum alloys

    SciTech Connect (OSTI)

    Frye, L.D.

    1984-11-20T23:59:59.000Z

    A gas-tungsten arc welding method for joining together structures formed of aluminum alloy with these structures disposed contiguously to a heat-damagable substrate of a metal dissimilar to the aluminum alloy. The method of the present invention is practiced by diamond machining the fay surfaces of the aluminum alloy structures to provide a mirror finish thereon having a surface roughness in the order of about one micro-inch. The fay surfaces are aligned and heated sufficiently by the tungsten electrode to fuse the aluminum alloy contiguous to the fay surfaces to effect the weld joint. The heat input used to provide an oxide-free weld is significantly less than that required if the fay surfaces were prepared by using conventional chemical and mechanical practices.

  3. Tungsten spectroscopy relevant to the diagnostics development of ITER divertor plasmas

    SciTech Connect (OSTI)

    Clementson, J; Beiersdorfer, P; Magee, E W; McLean, H S; Wood, R D

    2009-12-01T23:59:59.000Z

    The ITER tokamak will have tungsten divertor tiles and, consequently, the divertor plasmas are expected to contain tungsten ions. The spectral emission from these ions can serve to diagnose the divertor for plasma parameters such as tungsten concentrations, densities, ion and electron temperatures, and flow velocities. The ITER divertor plasmas will likely have densities around 10{sup 14-15} cm{sup -3} and temperatures below 150 eV. These conditions are similar to the plasmas at the Sustained Spheromak Physics Experiment (SSPX) in Livermore. To simulate ITER divertor plasmas, a tungsten impurity was introduced into the SSPX spheromak by prefilling it with tungsten hexacarbonyl prior to the usual hydrogen gas injection and initiation of the plasma discharge. The possibility of using the emission from low charge state tungsten ions to diagnose tokamak divertor plasmas has been investigated using a high-resolution extreme ultraviolet spectrometer.

  4. Andrew Mahlstadt Literature and the Mountains recommended reading

    E-Print Network [OSTI]

    Wisconsin at Madison, University of

    Andrew Mahlstadt Literature and the Mountains Ā­ recommended reading Critical works on mountains", in The Adventures of Ghanada (Premendra Mitra) A River Runs through it (Norman Maclean) "Brokeback Mountain" (Annie

  5. Photoionization of the valence shells of the neutral tungsten atom

    E-Print Network [OSTI]

    Ballance, Connor P

    2015-01-01T23:59:59.000Z

    Results from large-scale theoretical cross section calculations for the total photoionization of the 4f, 5s, 5p and 6s orbitals of the neutral tungsten atom using the Dirac Coulomb R-matrix approximation (DARC: Dirac-Atomic R-matrix codes) are presented. Comparisons are made with previous theoretical methods and prior experimental measurements. In previous experiments a time-resolved dual laser approach was employed for the photo-absorption of metal vapours and photo-absorption measurements on tungsten in a solid, using synchrotron radiation. The lowest ground state level of neutral tungsten is $\\rm 5p^6 5d^4 6s^2 \\; {^5}D_{\\it J}$, with $\\it J$=0, and requires only a single dipole matrix for photoionization. To make a meaningful comparison with existing experimental measurements, we statistically average the large-scale theoretical PI cross sections from the levels associated with the ground state $\\rm 5p^6 5d^4 6s^2 \\; {^5}D_{\\it J}[{\\it J}=0,1,2,3,4]$ levels and the $\\rm 5d^56s \\; ^7S_3$ excited metastable...

  6. Synthesis, Crystal Structure, and Elastic Properties of Novel Tungsten Nitrides

    SciTech Connect (OSTI)

    Wang, Shanmin; Yu, Xiaohui; Lin, Zhijun; Zhang, Ruifeng; He, Duanwei; Qin, Jiaqian; Zhu, Jinlong; Han, Jiantao; Wang, Lin; Mao, Ho-kwang; Zhang, Jianzhong; Zhao, Yusheng (UNLV); (Ehime U); (CIW); (Sichuan U.); (LANL)

    2012-12-13T23:59:59.000Z

    Among transition metal nitrides, tungsten nitrides possess unique and/or superior chemical, mechanical, and thermal properties. Preparation of these nitrides, however, is challenging because the incorporation of nitrogen into tungsten lattice is thermodynamically unfavorable at atmospheric pressure. To date, most materials in the W-N system are in the form of thin films produced by nonequilibrium processes and are often poorly crystallized, which severely limits their use in diverse technological applications. Here we report synthesis of tungsten nitrides through new approaches involving solid-state ion exchange and nitrogen degassing under pressure. We unveil a number of novel nitrides including hexagonal and rhombohedral W{sub 2}N{sub 3}. The final products are phase-pure and well-crystallized in bulk forms. For hexagonal W{sub 2}N{sub 3}, hexagonal WN, and cubic W3N4, they exhibit elastic properties rivaling or even exceeding cubic-BN. All four nitrides are prepared at a moderate pressure of 5 GPa, the lowest among high-pressure synthesis of transition metal nitrides, making it practically feasible for massive and industrial-scale production.

  7. Mountaineers comments on BPA Energy Planning & Marketing 1 October 18, 2002

    E-Print Network [OSTI]

    , Mountaineers are witnessing significant increase in air pollution, from the summits of our region's mountains

  8. Western Area Power Administration Rocky Mountain Region (Western...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Number: E-mail: Communication Engineer: Office Phone Number: Cell Phone Number: E-mail: SCADA Engineer: Office Phone Number: Cell Phone Number: E-mail: Finance (include title):...

  9. area yucca mountain: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This procedure leads to extremely high ground-motion estimates, a potential high- level radioactive waste storage site, is reported in Stepp et al. (2001) as mostly Duan, Benchun...

  10. Geothermal Literature Review At White Mountains Area (Goff &...

    Open Energy Info (EERE)

    24 potential sites for EGS development across the U.S., as well as modeling of the representative geologic systems in which promising EGS sites occur. References Fraser Goff,...

  11. Self Potential At Blue Mountain Geothermal Area (Fairbank Engineering...

    Open Energy Info (EERE)

    low SP anomalies. The anomalies had a minimum value of -268 mV. References Fairbank Engineering Ltd (2003) Phase I Report U.S. DOE GRED II Program Additional References Retrieved...

  12. Reflection Survey At Blue Mountain Geothermal Area (Fairbank...

    Open Energy Info (EERE)

    dipping faults that become less steep with increasing depth. References Fairbank Engineering Ltd (2003) Phase I Report U.S. DOE GRED II Program Additional References Retrieved...

  13. Self Potential At Blue Mountain Geothermal Area (Fairbank Engineering Ltd,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd JumpInformationScotts Corners, NewSeegerSelden, NewVC-2A,

  14. Slim Holes At Blue Mountain Geothermal Area (Fairbank Engineering Ltd,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk, New York:SiG SolarSkykomish,New York: Energy Resources2003) |

  15. Exploratory Boreholes At Blue Mountain Geothermal Area (Parr & Percival,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania: EnergyExolis Energy Jump to:Analogs For1991) | Open Energy

  16. Field Mapping At Blue Mountain Geothermal Area (Fairbank Engineering Ltd,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOEHazelPennsylvania:57427Ā°,Ferry County, Washington:Energy Information2003)

  17. Aerial Photography At Blue Mountain Geothermal Area (Fairbank Engineering

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEE Jump to:Ohio:Ads-tecInformationAecomLtd, 2003) | Open

  18. Aeromagnetic Survey At Blue Mountain Geothermal Area (Fairbank Engineering

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to:Ezfeedflag JumpID-fTriWildcat 1AMEE JumpAeroWind Inc. Place: Potsdam, NewOcean | Open

  19. Isotopic Analysis At Florida Mountains Area (Brookins, 1982) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetecGtelInterias Solar Energy JumpIremNot Available) JumpOpen

  20. Hydroprobe At Mcgee Mountain Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEIHesperia, California:ProjectPrograms

  1. Hyperspectral Imaging At Blue Mountain Geothermal Area (Calvin, Et Al.,

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, search OpenEIHesperia, California:ProjectProgramsAlteration JumpDixieHyper2010) |

  2. Zuni Mountains Nm Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch,Eaga SolarZolo Technologies Inc Jump to:Zuni

  3. Zuni Mountains Nm Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells, Wisconsin: EnergyWyandanch,Eaga SolarZolo Technologies Inc Jump

  4. Magnetotellurics At Glass Mountain Area (Cumming And Mackie, 2007) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend < MHKconverter <WAGMadison GasEnergy

  5. Magnetotellurics At Mcgee Mountain Area (DOE GTP) | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend < MHKconverter <WAGMadison GasEnergy| Open

  6. Magnetotellurics At Socorro Mountain Area (Owens, Et Al., 2005) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend < MHKconverter <WAGMadisonOpen Energy

  7. Geothermometry At Blue Mountain Geothermal Area (Casteel, Et Al., 2010) |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdf Jump1946865Ā°,Park,2005)EnergyAmatitlanGmbH und Co KG Jump to:EnergyOpenOpen

  8. Ground Gravity Survey At Blue Mountain Geothermal Area (Fairbank

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are8COaBulkTransmissionSitingProcess.pdfGetec AG ContractingGreenOrderNebraska:Gridley,Grocery 2009(Redirected1978)

  9. McGee Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose Bend <StevensMcClellan, California: Energy ResourcesMcGee

  10. Static Temperature Survey At Blue Mountain Geothermal Area (Fairbank

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt LtdShawangunk,SoutheastSt. Francis(RedirectedStarr County,and5EnergyCull,

  11. Earth Tidal Analysis At Marysville Mountain Geothermal Area (1984) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale,South,Earlsboro, Oklahoma: EnergyEnergy Information

  12. Cuttings Analysis At Jemez Mountain Geothermal Area (1976) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformationNew|CoreCpWingCushing, Maine:1983) | Open

  13. Cuttings Analysis At Marysville Mountain Geothermal Area (1976) | Open

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model, clickInformationNew|CoreCpWingCushing, Maine:1983) | OpenEnergy

  14. Dipole-Dipole Resistivity At Blue Mountain Geothermal Area (Fairbank

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale, Michigan: Energy Resources Jump to:

  15. Direct-Current Resistivity Survey At Blue Mountain Area (Fairbank

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand JumpConceptual Model,DOE FacilityDimondale, Michigan: Energy Resources Jump(Thomas, 1986) |

  16. Thermal Gradient Holes At Blue Mountain Geothermal Area (Fairbank &

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries PvtStratosolarTharaldson Ethanol LLC JumpWoodlands,EnergyHot-Dry-Rock

  17. McGee Mountain Geothermal Area | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu an Group JumpNewMassachusettsMayo Power Jump to:McCoyMcGee

  18. Reflection Survey At Blue Mountain Geothermal Area (Fairbank Engineering

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation, searchRayreview ofOzkocak, 1985) Exploration

  19. Rock Sampling At Florida Mountains Area (Brookins, 1982) | Open Energy

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation,MazeOhio:Ohio: Energy ResourcesRock Lab Activity

  20. Data Acquisition-Manipulation At Socorro Mountain Area (Kooten, 1987) |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:PowerCER.pngRoofs andCrops Ltd2000) | Open EnergyEt Al., 2003)OpenOpen

  1. Georgia Mountain | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualPropertyd8c-a9ae-f8521cbb8489InformationFrenchtown,JumpValley near| OpenMountain Jump to:

  2. King Mountain | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOf Kilauea Volcano, Hawaii |Island,KasVinod PrivateaMountain Wind Ranch

  3. Mountain Air | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)Mountain Air Jump to:

  4. EA-1746: Blue Mountain Geothermal Development Project, Humboldt...

    Broader source: Energy.gov (indexed) [DOE]

    December 3, 2007 EA-1746: Final Environmental Assessment Blue Mountain Geothermal Development Project April 26, 2010 EA-1746: Finding of No Significant Impact Blue Mountain...

  5. Fate of Mountain Glaciers in the Anthropocene

    E-Print Network [OSTI]

    Stocker, Thomas

    Fate of Mountain Glaciers in the Anthropocene A Report by the Working Group Commissioned of Sciences at the Vatican, to contemplate the observed retreat of the mountain glaciers, its causes and consequences. This report resulted from a workshop in April 2011 at the Vatican. 2007 Courtesy of Glacier

  6. 2, 121, 2008 Mountain glaciers of

    E-Print Network [OSTI]

    Boyer, Edmond

    TCD 2, 1­21, 2008 Mountain glaciers of NE Asia M. D. Ananicheva et al. Title Page Abstract The Cryosphere Discussions is the access reviewed discussion forum of The Cryosphere Mountain glaciers of NE Asia in the near future: a projection based on climate-glacier systems' interaction M. D. Ananicheva1 , A. N

  7. Frozen Ground 9 PERMAFROST HAZARDS IN MOUNTAINS

    E-Print Network [OSTI]

    Kääb, Andreas

    and other forms of creeping mountain permafrost may be the source of a number of hazards. Rock glaciers of large rock avalanche disasters are examples of mountain hazards. In the case of the September 20, 2002, rock-ice avalanche at Kolka-Karmadon in the Russian Caucasus, a combined rock-ice avalanche

  8. Geologic and hydrologic investigations of a potential nuclear waste disposal site at Yucca Mountain, southern Nevada

    SciTech Connect (OSTI)

    Carr, M.D.; Yount, J.C. (eds.)

    1988-12-31T23:59:59.000Z

    Yucca Mountain in southern Nye County, Nevada, has been selected by the United States Department of Energy as one of three potential sites for the nation`s first high-level nuclear waste repository. Its deep water table, closed-basin ground-water flow, potentially favorable host rock, and sparse population have made the Yucca Mountain area a viable candidate during the search for a nuclear waste disposal site. Yucca Mountain, however, lies within the southern Great Basin, a region of known contemporary tectonism and young volcanic activity, and the characterization of tectonism and volcanism remains as a fundamental problem for the Yucca Mountain site. The United States Geological Survey has been conducting extensive studies to evaluate the geologic setting of Yucca Mountain, as well as the timing and rates of tectonic and volcanic activity in the region. A workshop was convened by the Geologic Survey in Denver, Colorado, on August 19, 20, and 21, 1985, to review the scientific progress and direction of these studies. Considerable debate resulted. This collection of papers represents the results of some of the studies presented at the workshop, but by no means covers all of the scientific results and viewpoints presented. Rather, the volume is meant to serve as a progress report on some of the studies within the Geological Survey`s continuing research program toward characterizing the tectonic framework of Yucca Mountain. Individual papers were processed separately for the data base.

  9. Energy in the Mountain West: Colonialism and Independence

    SciTech Connect (OSTI)

    Steven Piet; Lloyd Brown; Robert Cherry; Craig Cooper; Harold Heydt; Richard Holman; Travis McLing

    2007-08-01T23:59:59.000Z

    In many ways, the mountain west (Alaska, Arizona, Colorado, Idaho, Montana, New Mexico, Nevada, Utah, Wyoming) is an energy colony for the rest of the United States: it is rich in energy resources that are extracted to fuel economic growth in the wealthier and more populous coastal regions. Federal agencies and global corporations often behave as if the mountain west is a place to be exploited or managed for the benefit of customers and consumers elsewhere. Yet, the area. is not vast empty space with a limitless supply of natural resources, but rather a fast-growing region with a diverse economic base dependent on a limited supply of water. New decision processes and collaborations are slowly changing this situation, but in a piecemeal fashion that places local communities at odds with powerful external interests. Proper planning of major development is needed to insure that the west has a strong economic and cultural future after the fossil energy resources decline, even if that might be a century from now. To encourage the necessary public discussions, this paper identifies key differences between the mountain west and the rest of the United States and suggests some holistic approaches that could improve our future. This paper is designed to provoke thought and discussion; it does not report new analyses on energy resources or usage. It is a summary of a large group effort.

  10. Mountain

    U.S. Energy Information Administration (EIA) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro IndustriesTownDells,1Stocks Nov-14 Dec-14 Jan-15LiquidBG 0 20 40MonthlyBiodieselO F

  11. Preparation of hexagonal WO{sub 3} from hexagonal ammonium tungsten bronze for sensing NH{sub 3}

    SciTech Connect (OSTI)

    Szilagyi, Imre Miklos [Materials Structure and Modeling Research Group of the Hungarian Academy of Sciences, Budapest University of Technology and Economics, H-1111 Budapest, Szt. Gellert ter 4 (Hungary)], E-mail: imre.szilagyi@mail.bme.hu; Wang Lisheng; Gouma, Pelagia-Irene [Department of Materials Science and Engineering, 314 Old Engineering Building, SUNY, Stony Brook, NY 11794-2275 (United States); Balazsi, Csaba [Ceramics and Nanocomposites Laboratory, Research Institute for Technical Physics and Materials Science, H-1121 Budapest, Konkoly-Thege ut 29-33 (Hungary); Madarasz, Janos; Pokol, Gyoergy [Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, H-1111 Budapest, Szt. Gellert ter 4 (Hungary)

    2009-03-05T23:59:59.000Z

    Hexagonal tungsten oxide (h-WO{sub 3}) was prepared by annealing hexagonal ammonium tungsten bronze, (NH{sub 4}){sub 0.07}(NH{sub 3}){sub 0.04}(H{sub 2}O){sub 0.09}WO{sub 2.95}. The structure, composition and morphology of h-WO{sub 3} were studied by XRD, XPS, Raman, {sup 1}H MAS (magic angle spinning) NMR, scanning electron microscopy (SEM), and BET-N{sub 2} specific surface area measurement, while its thermal stability was investigated by in situ XRD. The h-WO{sub 3} sample was built up by 50-100 nm particles, had an average specific surface area of 8.3 m{sup 2}/g and was thermally stable up to 450 deg. C. Gas sensing tests showed that h-WO{sub 3} was sensitive to various levels (10-50 ppm) of NH{sub 3}, with the shortest response and recovery times (1.3 and 3.8 min, respectively) to 50 ppm NH{sub 3}. To this NH{sub 3} concentration, the sensor had significantly higher sensitivity than h-WO{sub 3} samples prepared by wet chemical methods.

  12. Systematic studies of the nucleation and growth of ultrananocrystalline diamond films on silicon substrates coated with a tungsten layer

    SciTech Connect (OSTI)

    Chu, Yueh-Chieh; Jiang, Gerald [Institute of Microelectronics, No.1, University Road, Tainan 701, Taiwan (China); Tu, Chia-Hao [Institute of Nanotechnology and Microsystems Engineering, No.1, University Road, Tainan 701, Taiwan (China); Department of Materials Science and Engineering, National Cheng Kung University, No.1, University Road, Tainan 701, Taiwan (China); Chang Chi [Institute of Nanotechnology and Microsystems Engineering, No.1, University Road, Tainan 701, Taiwan (China); Liu, Chuan-pu; Ting, Jyh-Ming [Department of Materials Science and Engineering, National Cheng Kung University, No.1, University Road, Tainan 701, Taiwan (China); Lee, Hsin-Li [Industrial Technology Research Institute - South, Tainan 701, Taiwan (China); Tzeng, Yonhua [Institute of Microelectronics, No.1, University Road, Tainan 701, Taiwan (China); Advanced Optoelectronics Technology Center, No.1, University Road, Tainan 701, Taiwan (China); Auciello, Orlando [Argonne National Laboratory, Materials Science Division, 9700 S. Cass Avenue, Argonne, Illinois 60439 (United States)

    2012-06-15T23:59:59.000Z

    We report on effects of a tungsten layer deposited on silicon surface on the effectiveness for diamond nanoparticles to be seeded for the deposition of ultrananocrystalline diamond (UNCD). Rough tungsten surface and electrostatic forces between nanodiamond seeds and the tungsten surface layer help to improve the adhesion of nanodiamond seeds on the tungsten surface. The seeding density on tungsten coated silicon thus increases. Tungsten carbide is formed by reactions of the tungsten layer with carbon containing plasma species. It provides favorable (001) crystal planes for the nucleation of (111) crystal planes by Microwave Plasma Enhanced Chemical Vapor Deposition (MPECVD) in argon diluted methane plasma and further improves the density of diamond seeds/nuclei. UNCD films grown at different gas pressures on tungsten coated silicon which is pre-seeded by nanodiamond along with heteroepitaxially nucleated diamond nuclei were characterized by Raman scattering, field emission-scanning electron microscopy, and high resolution-transmission electron microscopy.

  13. Nmr Study of Thiocarbonyl Derivatives of Fe and Mn were made with solutions of the tungsten and molybdenum species

    E-Print Network [OSTI]

    Bodner, George M.

    Nmr Study of Thiocarbonyl Derivatives of Fe and Mn were made with solutions of the tungsten.g.. the tungsten ion readily oxidizes in aqueous acid [A. Samotus and B. Kosowicz-Czajkowska, Rocz. Chem., 45, 1623

  14. Comparison of QM-Only and QM/MM Models for the Mechanism of Tungsten-Dependent Acetylene Hydratase

    E-Print Network [OSTI]

    Liao, Rongzhen

    Comparison of QM-Only and QM/MM Models for the Mechanism of Tungsten-Dependent Acetylene Hydratase study on the formation of vinyl alcohol in the catalytic cycle of tungsten-dependent acetylene hydratase

  15. Basement/cover rock relations of the Dry Fork Ridge Anticline termination, northeastern Bighorn Mountains, Wyoming and Montana

    E-Print Network [OSTI]

    Hennings, Peter Hill

    1986-01-01T23:59:59.000Z

    , Northeastern Bighorn Mountains, Wyoming and Montana. (August 1986) Peter Hill Hennings, B. S. , Texas A&M University Chairman of Advisory Committee: Dr. John H. Spang Field mapping on scales of 1:6, 000 and 1: 12, 000 indicate that the basement involved... in the Field Area Methodology DATA. PAGE I 3 7 10 12 17 25 25 28 Field Map. Interpretive Data: Cross Sections Dry Fork Ridge Anticline. Faole Point Anticline and the Mountain Flank. . Basement Geometry. Fracture Analysis...

  16. Pennsylvanian-Permian deformation at 1,000-5,000 feet of overburden, Sacramento Mountains, New Mexico

    E-Print Network [OSTI]

    Johnson, Mark Ryan

    1985-01-01T23:59:59.000Z

    , REFERENCES CITED VITA Page 109 111 116 LIST OF FIGURES Figure Page Index map of New Mexico showing location of study area Composite stratigraphic section, Sacramento Mountains, New Mexico (after Pray, 1961) Ouctilities of common sedimentary rocks... effective confining pressure. The Sacramento Mountains, located in south central New Mexico, separate the Great Plains to the east from the Basin and Range to the west (Figure 1). Up to 8, 000 ft (2, 440 m) of Precambrian and Paleozoic sedimentary rock...

  17. Modelling of Melt Damage of Tungsten Armour under Multiple Transients Expected in ITER and Validations Against JET-ILW Experiments

    E-Print Network [OSTI]

    Modelling of Melt Damage of Tungsten Armour under Multiple Transients Expected in ITER and Validations Against JET-ILW Experiments

  18. Bulk Tungsten in the JET Divertor: Potential Influence of the Exhaustion of Ductility and Grain Growth on the Lifetime

    E-Print Network [OSTI]

    Bulk Tungsten in the JET Divertor: Potential Influence of the Exhaustion of Ductility and Grain Growth on the Lifetime

  19. The Structure of the Tungsten Coatings Deposited by Combined Magnetron Sputtering and Ion Implantation for Nuclear Fusion Applications

    E-Print Network [OSTI]

    The Structure of the Tungsten Coatings Deposited by Combined Magnetron Sputtering and Ion Implantation for Nuclear Fusion Applications

  20. 3-D Finite Element Electromagnetic and Stress Analyses of the JET LB-SRP Divertor Element (Tungsten Lamella Design)

    E-Print Network [OSTI]

    3-D Finite Element Electromagnetic and Stress Analyses of the JET LB-SRP Divertor Element (Tungsten Lamella Design)

  1. Theoretical Description of Heavy Impurity Transport and its Application to the Modelling of Tungsten in JET and ASDEX Upgrade

    E-Print Network [OSTI]

    Theoretical Description of Heavy Impurity Transport and its Application to the Modelling of Tungsten in JET and ASDEX Upgrade

  2. Shower characteristics of particles with momenta from up to 100 GeV in the CALICE Scintillator-Tungsten HCAL

    E-Print Network [OSTI]

    Klempt W

    2015-01-01T23:59:59.000Z

    Shower characteristics of particles with momenta from up to 100 GeV in the CALICE Scintillator-Tungsten HCAL

  3. Clamping of Solid Tungsten Components for the Bulk W Divertor Row in JET – Precautionary Design for a Brittle Material

    E-Print Network [OSTI]

    Clamping of Solid Tungsten Components for the Bulk W Divertor Row in JET – Precautionary Design for a Brittle Material

  4. Soft X-Ray Tomographic Reconstruction of JET ILW Plasmas with Tungsten Impurity and Different Spectral Response of Detectors

    E-Print Network [OSTI]

    Soft X-Ray Tomographic Reconstruction of JET ILW Plasmas with Tungsten Impurity and Different Spectral Response of Detectors

  5. Power Handling of the Bulk Tungsten Divertor Row at JET: First Measurements and Comparison to the GTM Thermal Model

    E-Print Network [OSTI]

    Power Handling of the Bulk Tungsten Divertor Row at JET: First Measurements and Comparison to the GTM Thermal Model

  6. Positron-production Experiment In Tungsten Crystal Using 4 And 8-gev Channeling Electrons At The Kekb Injector Linac

    E-Print Network [OSTI]

    Suwada, T; Chehab, R; Enomoto, A; Furukawa, K; Kakihara, K; Kamitani, T; Ogawa, Y; Ohsawa, S; Okuno, H; Oogoe, T; Fujita, T; Umemori, K; Yoshida, K; Ababiy, V; Potylitsin, A P; Vnukov, I E; Hamatsu, R; Sasahara, K

    2002-01-01T23:59:59.000Z

    Positron-production Experiment In Tungsten Crystal Using 4 And 8-gev Channeling Electrons At The Kekb Injector Linac

  7. Positron-production Experiment By 8-gev Channeling Electrons In Crystal Tungsten At The Kekb Injector Linac

    E-Print Network [OSTI]

    Suwada, T

    2001-01-01T23:59:59.000Z

    Positron-production Experiment By 8-gev Channeling Electrons In Crystal Tungsten At The Kekb Injector Linac

  8. Variation and Trends of Landscape Dynamics, Land Surface Phenology and Net Primary Production of the Appalachian Mountains

    SciTech Connect (OSTI)

    Wang, Yeqiao; Zhao, Jianjun; Zhou, Yuyu; Zhang, Hongyan

    2012-12-15T23:59:59.000Z

    The gradients of the Appalachian Mountains in elevations and latitudes provide a unique regional perspective of landscape variations in the eastern United States and a section of the southeastern Canada. This study reveals patterns and trends of landscape dynamics, land surface phenology and ecosystem production along the Appalachian Mountains using time series data from Global Inventory Modeling and Mapping Studies (GIMMS) and AVHRR Global Production Efficiency Model (GloPEM) datasets. We analyzed the spatial and temporal patterns of Normalized Difference Vegetation Index (NDVI), length of growing season (LOS) and net primary production (NPP) of selected ecoregions along the Appalachian Mountains regions. We compared the results out of the Appalachian Mountains regions in different spatial contexts including the North America and the Appalachian Trail corridor area. To reveal latitudinal variations we analyzed data and compared the results between 30°N-40°N and 40°N-50°N latitudes. The result revealed significant decreases in annual peak NDVI in the Appalachian Mountains regions. The trend for the Appalachian Mountains regions was -0.0018 (R2=0.55, P<0.0001) NDVI unit decrease per year during 25 years between 1982 and 2006. The LOS had prolonged 0.3 day yr-1 during 25 years over the Appalachian Mountains regions. The NPP increased by 2.68 gC m-2yr-2 in Appalachian Mountains regions from 1981 to 2000. The comparison with the North America reveals the effects of topography and ecosystem compositions of the Appalachian Mountains. The comparison with the Appalachian Trail corridor area provides a regional mega-transect view of the measured variables.

  9. The geology of the Cross Mountain anticline, Moffat County, Colorado 

    E-Print Network [OSTI]

    Vinson, George Larry

    1955-01-01T23:59:59.000Z

    ~ Parka a south plungtug epaoitual trough area, The mountain ie referral te as Junotion Nountiin in the ear3g e~~ however, it M now knoun as Cross Nountain. Xn the ~ts vicinity Couglas Nountain lies gust eeet oi' M3LP Park aug is a part of the los... Universe@' ef So. 3jiger rsyo'rta are haauii-'to sids4? the sxess psouneain Split emi its' flenhs, -The-'see@on @on the, yse jgsn to loess" QppeN Qnstaeeons (gsneos shale) & . ox' apppoxURate 6~CO feet, has -been. stel$. 8Ii in detail 'ghe post Madison...

  10. Hydrogen interaction with point defects in tungsten K. Heinola, T. Ahlgren, K. Nordlund, and J. Keinonen

    E-Print Network [OSTI]

    Nordlund, Kai

    Hydrogen interaction with point defects in tungsten K. Heinola, T. Ahlgren, K. Nordlund, and J-principles calculations were used in determining the binding and trapping properties of hydrogen to point defects in tungsten. Hydrogen zero-point vibrations were taken into account. It was concluded that the monovacancy can

  11. Hot cracking in tungsten inert gas welding of magnesium alloy AZ91D

    E-Print Network [OSTI]

    Zhou, Wei

    Hot cracking in tungsten inert gas welding of magnesium alloy AZ91D W. Zhou*, T. Z. Long and C. K of the plates were produced using tungsten inert gas (TIG) welding method. The TIG arc was also used to deposit welding beads on some of the thin plates. No cracking was found in the butt joints. However, hot cracking

  12. Review on the EFDA programme on tungsten materials technology and science M. Rieth a,

    E-Print Network [OSTI]

    Nordlund, Kai

    Review on the EFDA programme on tungsten materials technology and science M. Rieth a, , J design studies for helium cooled divertors utilize tungsten materials and alloys, mainly due structural as well as armor materials in combination with the necessary production and fab- rication

  13. G.M. Wright, VLT Highlight, March 28, 2012 Growth of tungsten nano-tendrils in

    E-Print Network [OSTI]

    1 G.M. Wright, VLT Highlight, March 28, 2012 Growth of tungsten nano-tendrils in the Alcator C morphology of a tungsten divertor modify into fuzz under Helium bombardment in ITER and reactors?! · Linear fragile nano-tendrils! · Increased unipolar arcing! · Likely higher net erosion and W dust production

  14. X-ray diffraction study of the static strength of tungsten to 69 GPa Duanwei He* and Thomas S. Duffy

    E-Print Network [OSTI]

    Duffy, Thomas S.

    X-ray diffraction study of the static strength of tungsten to 69 GPa Duanwei He* and Thomas S of tungsten was determined under static high pressures to 69 GPa using x-ray diffraction techniques strength of tungsten increases with compression, reaching a value of 5.3 GPa at the highest pressure

  15. TUNGSTEN AND HAFNIUM DISTRIBUTION IN CALCIUM-ALUMINUM INCLUSIONS (CAIs) FROM ALLENDE AND EFREMOVKA. M. Humayun1

    E-Print Network [OSTI]

    Grossman, Lawrence

    TUNGSTEN AND HAFNIUM DISTRIBUTION IN CALCIUM-ALUMINUM INCLUSIONS (CAIs) FROM ALLENDE AND EFREMOVKA with, or even earlier than, metal from CAIs and chondrules [3]. Tungsten isotope compositions represent veins [5]. Tungsten mobility is cause for concern, but is not sufficient evidence against the Kleine et

  16. Z .Surface and Coatings Technology 130 2000 164 172 Production of high-density Ni-bonded tungsten carbide

    E-Print Network [OSTI]

    Ghoniem, Nasr M.

    Z .Surface and Coatings Technology 130 2000 164 172 Production of high-density Ni-bonded tungsten spraying; Nickel; Tungsten carbide 1. Introduction 1.1. General Since the mid-1990s, the market share of cemented Z .carbides has surpassed that of high-speed steels HSS , Z .with tungsten carbide WC having 50

  17. By Earle B. Amey Tungsten's unique high-temperature properties are beneficial The Office of the United States Trade Representative

    E-Print Network [OSTI]

    of tungsten ore concentrates and products with that of 1994. Demand generally increased in the cemented from products under these tariffs. during 1995. During 1995, prices for tungsten concentrates, which had built from 1985). Major Domestic production data for tungsten were developed by the liquidation of both

  18. By Earle B. Amey Tungsten's unique high-temperature in Metal Bulletin (London). ferrotungsten, carbide powder blends, and

    E-Print Network [OSTI]

    of a stronger tungsten market, at certain forms of waste and scrap. production of numerous end-use items of the U.S. economy influenced the overall increase in demand for tungsten products during 1994. The antidumping tariffs on imports of tungsten ore concentrates and products from China, initially imposed

  19. ENHANCEMENT OF THE POSITRON INTENSITY BY A TUNGSTEN SINGLE-CRYSTAL TARGET AT THE KEKB INJECTOR LINAC

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    by these stimulating results, we proceeded to systematic studies on the positron-production efficiencies with tungstenENHANCEMENT OF THE POSITRON INTENSITY BY A TUNGSTEN SINGLE-CRYSTAL TARGET AT THE KEKB INJECTOR, Russia R. Chehab, IPNL, IN2P3-CNRS, Universite Claude Bernald 1, France Abstract A new tungsten single

  20. Dynamics of femtosecond laser produced tungsten nanoparticle plumes

    SciTech Connect (OSTI)

    Harilal, S. S.; Hassanein, A. [Center for Materials Under Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States)] [Center for Materials Under Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Farid, N. [Center for Materials Under Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States) [Center for Materials Under Extreme Environment, School of Nuclear Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); School of Physics and Optical Engineering, Dalian University of Technology, Dalian 116024 (China); Kozhevin, V. M. [Ioffe Physics Technical Institute, Russian Academy of Sciences, St. Petersburg 194021 (Russian Federation)] [Ioffe Physics Technical Institute, Russian Academy of Sciences, St. Petersburg 194021 (Russian Federation)

    2013-11-28T23:59:59.000Z

    We investigated the expansion features of femtosecond laser generated tungsten nanoparticle plumes in vacuum. Fast gated images showed distinct two components expansion features, viz., plasma and nanoparticle plumes, separated by time of appearance. The persistence of plasma and nanoparticle plumes are ?500 ns and ?100 ?s, respectively, and propagating with velocities differed by 25 times. The estimated temperature of the nanoparticles showed a decreasing trend with increasing time and space. Compared to low-Z materials (e.g., Si), ultrafast laser ablation of high-Z materials like W provides significantly higher nanoparticle yield. A comparison between the nanoparticle plumes generated by W and Si is also discussed along with other metals.

  1. Electrodeposited tungsten-nickel-boron: A replacement for hexavalent chromium

    SciTech Connect (OSTI)

    Steffani, C.; Meltzer, M.

    1995-04-01T23:59:59.000Z

    Chromium, deposited from acidic solutions of its hexavalent ion, has been the rule for wear resistant, corrosion resistant coatings for many years. Although chromium coatings are durable, the plating process generates air emissions, effluent rinse waters, and process solutions that are toxic, suspected carcinogens, and a risk to human health and the environment. Tungsten-nickel-boron (W-Ni-B) alloy deposition is a potential substitute for hexavalent chrome. It has excellent wear, corrosion, and mechanical properties and also may be less of an environmental risk. This study examines the electroplating process and deposit properties of W-Ni-B and compares them with those of hexavalent chrome.

  2. Detection of the Natural Alpha Decay of Tungsten

    E-Print Network [OSTI]

    C. Cozzini; G. Angloher; C. Bucci; F. von Feilitzsch; D. Hauff; S. Henry; Th. Jagemann; J. Jochum; H. Kraus; B. Majorovits; V. Mikhailik; J. Ninkovic; F. Petricca; W. Potzel; F. Proebst; Y. Ramachers; W. Rau; M. Razeti; W. Seidel; M. Stark; L. Stodolsky; A. J. B. Tolhurst; W. Westphal; H. Wulandari

    2004-10-26T23:59:59.000Z

    The natural alpha decay of 180W has been unambiguously detected for the first time. The alpha peak is found in a (gamma,beta and neutron)-free background spectrum. This has been achieved by the simultaneous measurement of phonon and light signals with the CRESST cryogenic detectors. A half-life of T1/2 = (1.8 +- 0.2) x 10^18 y and an energy release of Q = (2516.4 +- 1.1 (stat.) +- 1.2 (sys.)) keV have been measured. New limits are also set on the half-lives of the other naturally occurring tungsten isotopes.

  3. Holocene forest history of the eastern plateaux in the Segura Mountains (Murcia, southeastern Spain)

    E-Print Network [OSTI]

    Herrera, Carlos M.

    Holocene forest history of the eastern plateaux in the Segura Mountains (Murcia, southeastern SpainĀ“nica), Facultad de BiologiĀ“a, Universidad de Murcia, Campus de Espinardo, 30100 Murcia, Spain b Area de BotaĀ“nica, Facultad de Ciencias, Universidad AutoĀ“noma de Barcelona, 01893 Bellaterra, Barcelona, Spain c School

  4. Crustal structure of the Transantarctic Mountains near the Ross Sea from ambient seismic noise tomography

    E-Print Network [OSTI]

    the Wilkes Subglacial Basin and the Aurora Subglacial Basin, but dispersion curves show that sediment a model for crustal shear wave velocities in the Transantarctic Mountains and surrounding areas of East velocities, which may be related to the presence of sediment, are observed at shallow depths beneath

  5. Electronic and structural properties of ultrathin tungsten nanowires and nanotubes by density functional theory calculation

    SciTech Connect (OSTI)

    Sun, Shih-Jye [Department of Applied Physics, National University of Kaohsiung, Kaohsiung 811, Taiwan (China); Lin, Ken-Huang; Li, Jia-Yun [Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Ju, Shin-Pon, E-mail: jushin-pon@mail.nsysu.edu.tw [Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-Sen University, Kaohsiung 804, Taiwan (China); Department of Medicinal and Applied Chemistry, Kaohsiung Medical University, Kaohsiung 807, Taiwan (China)

    2014-10-07T23:59:59.000Z

    The simulated annealing basin-hopping method incorporating the penalty function was used to predict the lowest-energy structures for ultrathin tungsten nanowires and nanotubes of different sizes. These predicted structures indicate that tungsten one-dimensional structures at this small scale do not possess B.C.C. configuration as in bulk tungsten material. In order to analyze the relationship between multi-shell geometries and electronic transfer, the electronic and structural properties of tungsten wires and tubes including partial density of state and band structures which were determined and analyzed by quantum chemistry calculations. In addition, in order to understand the application feasibility of these nanowires and tubes on nano-devices such as field emitters or chemical catalysts, the electronic stability of these ultrathin tungsten nanowires was also investigated by density functional theory calculations.

  6. Atomic data of tungsten for current and future uses in fusion and plasma science

    SciTech Connect (OSTI)

    Clementson, J.; Beiersdorfer, P. [Physics Division, Lawrence Livermore National Laboratory, P.O. Box 808, Livermore, CA 94551 (United States); Lennartsson, T. [Lund Observatory, Lund University, P.O. Box 43, SE-221 00 Lund (Sweden)

    2013-04-19T23:59:59.000Z

    Atomic physics has played an important role throughout the history of experimental plasma physics. For example, accurate knowledge of atomic properties has been crucial for understanding the plasma energy balance and for diagnostic development. With the shift in magnetic fusion research toward high-temperature burning plasmas like those expected to be produced in the ITER tokamak, the atomic physics of tungsten has become important. Tungsten will be a constituent of ITER plasmas because of its use as a plasma-facing material able to withstand high heat loads with lower tritium retention than other possible materials. Already, ITER diagnostics are being developed based on using tungsten radiation. In particular, the ITER Core Imaging X-ray Spectrometer (CIXS), which is designed to measure the core ion temperature and bulk plasma motion, is being based on the x-ray emission of neonlike tungsten ions (W{sup 64+}). In addition, tungsten emission will at ITER be measured by extreme ultraviolet (EUV) and optical spectrometers to determine its concentration in the plasma and to assess power loss and tungsten sputtering rates. On present-day tokamaks tungsten measurements are therefore being performed in preparation of ITER. Tungsten has very complex spectra and most are still unknown. The WOLFRAM project at Livermore aims to produce data for tungsten in various spectral bands: Lshell x-ray emission for CIXS development, soft x-ray and EUV M- and N-shell tungsten emission for understanding the edge radiation from ITER plasmas as well as from contemporary tokamaks, and O-shell emission for developing spectral diagnostics of the ITER divertor.

  7. Los Alamos National Laboratory Yucca Mountain Project Publications (1979-1996)

    SciTech Connect (OSTI)

    Ruhala, E.R.; Klein, S.H. [comps.

    1997-06-01T23:59:59.000Z

    This over-350 title publication list reflects the accomplishments of Los Alamos Yucca Mountain Site Characterization Project researchers, who, since 1979, have been conducting multidisciplinary research to help determine if Yucca Mountain, Nevada, is a suitable site for a high-level waste repository. The titles can be accessed in two ways: by year, beginning with 1996 and working back to 1979, and by subject area: mineralogy/petrology/geology, volcanism, radionuclide solubility/ground-water chemistry; radionuclide sorption and transport; modeling/validation/field studies; summary/status reports, and quality assurance.

  8. Rocky Mountain Power- Energy FinAnswer

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power's Energy FinAnswer program provides cash incentives to help its commercial and industrial customers improve the efficiency of their existing facilities and build new facilities...

  9. Chromatic instabilities in cesium-doped tungsten bronze nanoparticles

    SciTech Connect (OSTI)

    Adachi, Kenji, E-mail: kenji-adachi@ni.smm.co.jp; Ota, Yosuke; Tanaka, Hiroyuki; Okada, Mika; Oshimura, Nobumitsu; Tofuku, Atsushi [Ichikawa Research Laboratories, Sumitomo Metal Mining Co., Ltd., Ichikawa 272-8588 (Japan)

    2013-11-21T23:59:59.000Z

    Nanoparticles of alkali-doped tungsten bronzes are an excellent near-infrared shielding material, but exhibit slight chromatic instabilities typically upon applications of strong ultra-violet light or heating in humid environment, which acts detrimentally to long-life commercial applications. Origin of the chromatic instabilities in cesium-doped tungsten bronze has been investigated, and it has been found that the coloration and bleaching processes comprised electronic exchanges which accelerate or depress the polaron excitation and the localized surface plasmon resonance. Coloration on UV illumination is evidenced by electron diffraction as due to the formation of H{sub x}WO{sub 3}, which is considered to take place in the surface Cs-deficient WO{sub 3} region via the double charge injection mechanism. On the other hand, bleaching on heating in air and in humid environment is shown to accompany the extraction of Cs and electrons from Cs{sub 0.33}WO{sub 3} by X-ray photoelectron spectroscopy and X-ray diffraction analysis and is concluded to be an oxidation of Cs{sub 0.33}WO{sub 3} on the particle surface.

  10. Characterization of tungsten films and their hydrogen permeability

    SciTech Connect (OSTI)

    Nemani?, Vincenc, E-mail: vincenc.nemanic@ijs.si; Kova?, Janez [Jozef Stefan Institute, Jamova cesta 39, 1000 Ljubljana (Slovenia); Lungu, Cristian; Porosnicu, Corneliu [National Institute for Laser, Plasma and Radiation Physics, NILPRP, Magurele, Bucharest 077125 (Romania); Zajec, Bojan [Slovenian National Building and Civil Engineering Institute, Dimi?eva 12, 1000 Ljubljana (Slovenia)

    2014-11-01T23:59:59.000Z

    Prediction of tritium migration and its retention within fusion reactors is uncertain due to a significant role of the structural disorder that is formed on the surface layer after plasma exposure. Tungsten films deposited by any of the suitable methods are always disordered and contain a high density of hydrogen traps. Experiments on such films with hydrogen isotopes present a suitable complementary method, which improves the picture of the hydrogen interaction with fusion relevant materials. The authors report on the morphology, composition, and structure of tungsten films deposited by the thermionic vacuum arc method on highly permeable Eurofer substrates. Subsequently, hydrogen permeation studies through these films were carried out in a wide pressure range from 20 to 1000 mbars at 400?°C. The final value of the permeation coefficient for four samples after 24?h at 400?°C was between P?=?3.2?×?10{sup ?14}?mol?H{sub 2}/(m?s?Pa{sup 0.5}) and P?=?1.1?×?10{sup ?15}?mol H{sub 2}/(m s Pa{sup 0.5}). From the time evolution of the permeation flux, it was shown that diffusivity was responsible for the difference in the steady fluxes, as solubility was roughly the same. This is confirmed by XRD data taken on these samples.

  11. A Glove Box Enclosed Gas-Tungsten Arc Welding System

    SciTech Connect (OSTI)

    Reevr, E, M; Robino, C.V.

    1999-07-01T23:59:59.000Z

    This report describes an inert atmosphere enclosed gas-tungsten arc welding system which has been assembled in support of the MC2730, MC2730A and MC 3500 Radioisotope Thermoelectric Generator (RTG) Enhanced Surveillance Program. One goal of this program is to fabricate welds with microstructures and impurity levels which are similar to production heat source welds previously produced at Los Alamos National Laboratory and the Mound Facility. These welds will subsequently be used for high temperature creep testing as part of the overall component lifetime assessment. In order to maximize the utility of the welding system, means for local control of the arc atmosphere have been incorporated and a wide range of welding environments can easily be evaluated. The gas-tungsten arc welding system used in the assembly is computer controlled, includes two-axis and rotary motion, and can be operated in either continuous or pulsed modes. The system can therefore be used for detailed research studies of welding impurity effects, development of prototype weld schedules, or to mimic a significant range of production-like welding conditions. Fixturing for fabrication of high temperature creep test samples have been designed and constructed, and weld schedules for grip-tab and test welds have been developed. The microstructure of these welds have been evaluated and are consistent with those used during RTG production.

  12. Remediation progress at the Iron Mountain Mine Superfund site, California. Information Circular/1991

    SciTech Connect (OSTI)

    Biggs, F.R.

    1991-01-01T23:59:59.000Z

    The report was prepared by the U.S. Bureau of Mines to present a brief history of the listing of Iron Mountain Mine as a Superfund site on the National Priorities List (NPL) and subsequent remedial actions. The mine area is located on 4,400 acres near Redding, CA, and includes underground workings, an open pit area, waste rock dumps, and tailings piles. The property involves multiple sources of acid mine drainage (AMD) that are high in copper, zinc, and cadmium. The selected remedial actions, based on the Record of Decision of 1986, would partially cap the richmond mineralized zone to reduce infiltration of clean water, divert clean surface waters away from contaminated areas, fill surface subsidence areas, and enlarge the Spring Creek debris dam to provide increased surge capacity. Site remediation efforts at Iron Mountain are well into the remedial design-remedial action phase. Details of activities and designs of remedial elements are presented, and future activities, discussed.

  13. Tungsten Cluster Migration on Nanoparticles: Minimum Energy Pathway and Migration Mechanism

    SciTech Connect (OSTI)

    Chen, Dong; Hu, Wangyu; Gao, Fei; Deng, Huiqiu; Sun, Lixian

    2011-03-02T23:59:59.000Z

    Transition state searches have been employed to investigate the migration mechanisms of W clusters on W nanoparticles, and to determine the corresponding migration energies for the possible migration paths of these clusters. The tungsten clusters containing up to four adatoms are found to prefer 2D-compact structures with relatively low binding energies. The effect of interface and vertex regions on the migration behavior of the clusters is significantly strong, as compared to that of nanoparticle size. The migration mechanisms are quite different when the clusters are located at the center of the nanoparticle and near the interface or vertex areas. Near the interfaces and vertex areas, the substrate atoms tend to participate in the migration processes of the clusters, and can join the adatoms to form a larger cluster or lead to the dissociation of a cluster via the exchange mechanism, which results in the adatom crossing the facets. The lowest energy paths are used to be determined the energy barriers for W cluster migrations (from 1- to 4-atoms) on the facets, edges and vertex regions. The calculated energy barriers for the trimers suggest that the concerted migration is more probable than the successive jumping of a single adatom in the clusters. In addition, it of interest to note that the dimer shearing is a dominant migration mechanism for the tetramer, but needs to overcome a relatively higher migration energy than other clusters.

  14. Facile Synthesis of a Tungsten Alkylidyne Catalyst for Alkyne Zachary J. Tonzetich, Yan Choi Lam, Peter Muller, and Richard R. Schrock*

    E-Print Network [OSTI]

    Müller, Peter

    Facile Synthesis of a Tungsten Alkylidyne Catalyst for Alkyne Metathesis Zachary J. Tonzetich, Yan cis double bonds. Tungsten alkylidyne trialkoxide alkyne metathesis catalysts were discovered in 1981 of cleavage of a tungsten-tungsten triple bond upon reaction with an alkyne or nitrile.9 Recent advances

  15. Preparation of dinitrogen, hydrido, and carbonyl complexes of molybdenum and tungsten from higher halides

    SciTech Connect (OSTI)

    Borisov, A.P.; Makhaev, V.D.; Semenenko, K.N.

    1988-01-20T23:59:59.000Z

    The yields, physicochemical properties, and analyses of phosphine complexes of molybdenum and tungsten are shown. The reduction of molydenum pentachloride or tungsten hexachloride with metallic magnesium in THF in the presence of a tertiary organic phosphines in an atmosphere of nitrogen, hydrogen, or carbon monoxide provided a convenient method for the preparation of dinitrogen M(N/sub 2/)/sub 2/L/sub 4/, hydride MH/sub 4/L/sub 4/, or carbonyl M(CO)/sub 6/minus/x/L/sub x/ complexes respectively of molybdenum or tungsten (M = Mo, W; L - tertiary organic phosphine).

  16. Tunable carbon nanotube-tungsten carbide nanoparticles heterostructures by vapor deposition

    SciTech Connect (OSTI)

    Xia, Min; Guo, Hongyan; Ge, Changchun [Institute of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing (China); Institute of Powder Metallurgy and Advanced Ceramics, Southwest Jiaotong University, 111, 1st Section, Northern 2nd Ring Road, Chengdu (China); Yan, Qingzhi, E-mail: qzyan@ustb.edu.cn; Lang, Shaoting [Institute of Special Ceramics and Powder Metallurgy, University of Science and Technology Beijing, 30 Xueyuan Road, Haidian District, Beijing (China)

    2014-05-14T23:59:59.000Z

    A simple, versatile route for the synthesis of carbon nanotube (CNT)-tungsten carbide nanoparticles heterostructures was set up via vapor deposition process. For the first time, amorphous CNTs (?-CNTs) were used to immobilized tungsten carbide nanoparticles. By adjusting the synthesis and annealing temperature, ?-CNTs/amorphous tungsten carbide, ?-CNTs/W{sub 2}C, and CNTs/W{sub 2}C/WC heterostructures were prepared. This approach provides an efficient method to attach other metal carbides and other nanoparticles to carbon nanotubes with tunable properties.

  17. Tungsten carbide/porous carbon composite as superior support for platinum catalyst toward methanol electro-oxidation

    SciTech Connect (OSTI)

    Jiang, Liming [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); Fu, Honggang, E-mail: fuhg@vip.sina.com [School of Chemical Engineering and Technology, Harbin Institute of Technology, Harbin 150001 (China); Key Laboratory of Functional Inorganic Material Chemistry, Heilongjiang University, Harbin 150080 (China); Wang, Lei; Mu, Guang; Jiang, Baojiang; Zhou, Wei; Wang, Ruihong [Key Laboratory of Functional Inorganic Material Chemistry, Heilongjiang University, Harbin 150080 (China)

    2014-01-01T23:59:59.000Z

    Graphical abstract: The WC nanoparticles are well dispersed in the carbon matrix. The size of WC nanoparticles is about 30 nm. It can be concluded that tungsten carbide and carbon composite was successfully prepared by the present synthesis conditions. - Highlights: • The WC/PC composite with high specific surface area was prepared by a simple way. • The Pt/WC/PC catalyst has superior performance toward methanol electro-oxidation. • The current density for methanol electro-oxidation is as high as 595.93 A g{sup ?1} Pt. • The Pt/WC/PC catalyst shows better durability and stronger CO electro-oxidation. • The performance of Pt/WC/PC is superior to the commercial Pt/C (JM) catalyst. - Abstract: Tungsten carbide/porous carbon (WC/PC) composites have been successfully synthesized through a surfactant assisted evaporation-induced-assembly method, followed by a thermal treatment process. In particular, WC/PC-35-1000 composite with tungsten content of 35% synthesized at the carbonized temperature of 1000 °C, exhibited a specific surface area (S{sub BET}) of 457.92 m{sup 2} g{sup ?1}. After loading Pt nanoparticles (NPs), the obtained Pt/WC/PC-35-1000 catalyst exhibits the highest unit mass electroactivity (595.93 A g{sup ?1} Pt) toward methanol electro-oxidation, which is about 2.6 times as that of the commercial Pt/C (JM) catalyst. Furthermore, the Pt/WC/PC-35-1000 catalyst displays much stronger resistance to CO poisoning and better durability toward methanol electrooxidation compared with the commercial Pt/C (JM) catalyst. The high electrocatalytic activity, strong poison-resistivity and good stability of Pt/WC/PC-35-1000 catalyst are attributed to the porous structures and high specific surface area of WC/PC support could facilitate the rapid mass transportation. Moreover, synergistic effect between WC and Pt NPs is favorable to the higher catalytic performance.

  18. Mechanisms of gas precipitation in plasma-exposed tungsten

    SciTech Connect (OSTI)

    R. D. Kolasinski; D. F. Cowgill; D. C. Donovan; M. Shimada

    2012-05-01T23:59:59.000Z

    Precipitation in subsurface bubbles is a key process that governs how hydrogen isotopes migrate through and become trapped within plasma-exposed tungsten. We describe a continuum-scale model of hydrogen diffusion in plasma-exposed materials that includes the effects of precipitation. The model can account for bubble expansion via dislocation loop punching, using an accurate equation of state to determine the internal pressure. This information is used to predict amount of hydrogen trapped by bubbles, as well as the conditions where the bubbles become saturated. In an effort to validate the underlying assumptions, we compare our results with published positron annihilation and thermal desorption spectroscopy data, as well as our own measurements using the tritium plasma experiment (TPE).

  19. Pico- and nanosecond laser ablation of mixed tungsten / aluminium films

    E-Print Network [OSTI]

    Wisse, M; Steiner, R; Mathys, D; Stumpp, A; Joanny, M; Travere, J M; Meyer, E

    2014-01-01T23:59:59.000Z

    In order to extend the investigation of laser-assisted cleaning of ITER-relevant first mirror materials to the picosecond regime, a commercial laser system delivering 10 picosecond pulses at 355 nm at a frequency of up to 1 MHz has been used to investigate the ablation of mixed aluminium (oxide) / tungsten (oxide) layers deposited on poly- and nanocrystalline molybdenum as well as nanocrystalline rhodium mirrors. Characterization before and after cleaning using scanning electron microscopy (SEM) and spectrophotometry shows heavy dust formation, resulting in a degradation of the reflectivity. Cleaning using a 5 nanosecond pulses at 350 and 532 nm, on the other hand, proved very promising. The structure of the film remnants suggests that in this case buckling was the underlying removal mechanism rather than ablation. Repeated coating and cleaning using nanosecond pulses is demonstrated.

  20. Determination of the electron–phonon coupling constant in tungsten

    SciTech Connect (OSTI)

    Daraszewicz, Szymon L.; Duffy, Dorothy M.; Shluger, Alexander L. [Department of Physics and Astronomy, London Centre for Nanotechnology, University College London, Gower Street, WC1E 6BT London (United Kingdom); Giret, Yvelin [Department of Physics and Astronomy, London Centre for Nanotechnology, University College London, Gower Street, WC1E 6BT London (United Kingdom); The Institute of Scientific and Industrial Research (ISIR), Osaka University, Mihogaoka 8-1, Ibaraki, Osaka 567-0047 (Japan); Tanimura, Hiroshi; Tanimura, Katsumi [The Institute of Scientific and Industrial Research (ISIR), Osaka University, Mihogaoka 8-1, Ibaraki, Osaka 567-0047 (Japan)

    2014-07-14T23:59:59.000Z

    We used two methods to determine the effective electron-phonon coupling constant (G{sub 0}) in tungsten. Our first principles calculations predict G{sub 0}?=?1.65?×?10{sup 17?}W m{sup ?3} K{sup ?1}. The temporal decay of the femtosecond-resolution optical reflectivity for a (100) surface of bulk W was measured using a pump-probe scheme and analysed using ab initio parameterised two temperature model, which includes both the effects of the electron-phonon coupling and thermal conduction into bulk. This analysis gives G{sub 0}?=?1.4(3)?×?10{sup 17?}W m{sup ?3} K{sup ?1}, in good agreement with the theoretical prediction. The described effective method of calculating and measuring G{sub 0} in bulk materials can be easily extended to other metals.

  1. Gamma Spectrum from Neutron Capture on Tungsten Isotopes

    SciTech Connect (OSTI)

    Hurst, Aaron; Summers, Neil; Sleaford, Brad; Firestone, Richard B; Belgya, T.; Revay, Z.S.

    2010-04-29T23:59:59.000Z

    An evaluation of thermal neutron capture on the stable tungsten isotopes is presented, with preliminary results for the compound systems 183;184;185;187W. The evaluation procedure compares the g-ray cross-section data collected at the Budapest reactor, with Monte Carlo simulations of g-ray emission following the thermal neutron-capture process. The statistical-decay code DICEBOX was used for the Monte Carlo simulations. The evaluation yields new gamma rays in 185W and the confirmation of spins in 187W, raising the number of levels below which the level schemes are considered complete, thus increasing the number of levels that can be used in neutron data libraries.

  2. Performance of a Clad Tungsten Rod Spallation Neutron Source Target

    SciTech Connect (OSTI)

    Sommer, Walter F. [Los Alamos National Laboratory (United States); Maloy, Stuart A. [Los Alamos National Laboratory (United States); Louthan, McIntyre R. [Savannah River National Laboratory (United States); Willcutt, Gordon J. [Los Alamos National Laboratory (United States); Ferguson, Phillip D. [Oak Ridge National Laboratory (United States); James, Michael R. [Los Alamos National Laboratory (United States)

    2005-09-15T23:59:59.000Z

    Tungsten rods, slip-clad with Type 304L stainless steel, performed successfully as a spallation neutron source target operating to a peak fluence of {approx}4 x 10{sup 21} p/cm{sup 2}. The target was used as a neutron source during the Accelerator Production of Tritium (APT) materials irradiation program at the Los Alamos Neutron Science Center. Tungsten rods of 2.642-mm diameter were slip-fit in Type 304L stainless steel tubes that had an inner diameter of 2.667 mm. The radial gap was filled with helium at atmospheric pressure and room temperature. Los Alamos High Energy Transport (LAHET) calculations suggest a time-averaged peak power deposition in the W of 2.25 kW/cm{sup 3}. Thermal-hydraulic calculations indicate that the peak centerline W temperature reached 271 deg. C. The LAHET calculations were also used to predict neutron and proton fluxes and spectra for the complex geometry used in the irradiation program. Activation foil sets distributed throughout the experiment were used to determine target neutronics performance as a comparison to the LAHET calculations. Examination of the irradiated target assemblies revealed no significant surface degradation or corrosion on either the Type 304L or the W surfaces. However, it was clear that the irradiation changed material properties because post-proton-irradiation measurements on Type 304L test samples from the APT program demonstrated increases in the yield strength and decreases in the ductility and fracture toughness with increasing dose, and the wrought W rod samples became brittle. Fortunately, the slip-clad target design subjects the materials to very low stress.

  3. Geology of the central Little Burro Mountains Grant County, New Mexico

    E-Print Network [OSTI]

    Edwards, George H.

    1961-01-01T23:59:59.000Z

    The Little Burro Mountains are a small fault-block mountain range in central Grant County, New Mexico. Rocks of the Precambrian Burro Mountains batholith are exposed along the southwest scarp of the mountains, and are overlain by Upper...

  4. Tungsten bridge for the low energy ignition of explosive and energetic materials

    DOE Patents [OSTI]

    Benson, D.A.; Bickes, R.W. Jr.; Blewer, R.S.

    1990-12-11T23:59:59.000Z

    A tungsten bridge device for the low energy ignition of explosive and energetic materials is disclosed. The device is fabricated on a silicon-on-sapphire substrate which has an insulating bridge element defined therein using standard integrated circuit fabrication techniques. Then, a thin layer of tungsten is selectively deposited on the silicon bridge layer using chemical vapor deposition techniques. Finally, conductive lands are deposited on each end of the tungsten bridge layer to form the device. It has been found that this device exhibits substantially shorter ignition times than standard metal bridges and foil igniting devices. In addition, substantially less energy is required to cause ignition of the tungsten bridge device of the present invention than is required for common metal bridges and foil devices used for the same purpose. 2 figs.

  5. Molecular dynamics simulation of deuterium trapping and bubble formation in tungsten

    E-Print Network [OSTI]

    Harilal, S. S.

    erosion rate [1]. In addition, tungsten is a high Z material, therefore the physical sputtering yield surface [5­7] or liquid lithium [8] has been recently studied, while others investigated the low energy

  6. Sintering and joining of low temperature co-fired tungsten and aluminum oxide

    E-Print Network [OSTI]

    Boonyongmaneerat, Yuttanant

    2006-01-01T23:59:59.000Z

    Conventional methods used to fabricate co-fired tungsten/alumina composites usually rely on high temperature processing (>1500C). As it would be beneficial or even necessary for some applications to produce such composites ...

  7. Syntheses of Tungsten tert-Butylimido and Adamantylimido Alkylidene Complexes Employing Pyridinium Chloride as the Acid

    E-Print Network [OSTI]

    Jeong, Hyangsoo

    Routes to new tungsten alkylidene complexes that contain tert-butylimido or adamantylimido ligands have been devised that begin with a reaction between WCl[subscript 6] and 4 equivalents of HNR(TMS) to give [W(NR)[subscript ...

  8. Molybdenum and Tungsten Monoalkoxide Pyrrolide (MAP) Alkylidene Complexes That Contain a 2,6-Dimesitylphenylimido Ligand

    E-Print Network [OSTI]

    Gerber, Laura C. H.

    Molybdenum and tungsten bispyrrolide alkylidene complexes that contain a 2,6-dimesitylphenylimido (NAr*) ligand have been prepared, in which the pyrrolide is the parent pyrrolide or 2,5-dimethylpyrrolide. Monoalkoxide ...

  9. Electropolymerized Polyaniline Stabilized Tungsten Oxide Nanocomposite Films: Electrochromic Behavior and Electrochemical

    E-Print Network [OSTI]

    Guo, John Zhanhu

    Electropolymerized Polyaniline Stabilized Tungsten Oxide Nanocomposite Films: Electrochromic. The optical properties and electrochemical capacitive behaviors of the composite films for electrochromic (EC electrochromism at both positive and negative potentials arising from PANI and WO3, respectively. A coloration

  10. Electrochromic properties of tungsten trioxide thin films prepared by photochemical vapor deposition

    SciTech Connect (OSTI)

    Maruyama, Toshiro; Kanagawa, Tetsuya (Kyoto Univ. (Japan). Dept. of Chemical Engineering)

    1994-09-01T23:59:59.000Z

    Electrochromic tungsten trioxide thin films were prepared by a photochemical vapor deposition. The source material was tungsten carbonyl. A 6 W low pressure mercury lamp was used as a light source. Amorphous tungsten trioxide thin films were obtained at a substrate temperature of 200 C. The UV radiation enhances the oxidation of tungsten, in addition to the acceleration of the deposition of the films. Reduction and oxidation of the films in a 0.3M LiClO[sub 4] propylene carbonate solution resulted in desirable changes in optimal absorption. The bleaching time was short compared to the amorphous CVD film. Coulometry indicated that the coloration efficiency was 222 cm[sup 2]/C.

  11. Simulation Studies of Hydrogen Ion reflection from Tungsten for the Surface Production of Negative Hydrogen Ions

    SciTech Connect (OSTI)

    Kenmotsu, Takahiro; Wada, Motoi [Doshisha University, Kyotanabe, Kyoto 610-0394 (Japan)

    2011-09-26T23:59:59.000Z

    The production efficiency of negative ions at tungsten surface by particle reflection has been investigated. Angular distributions and energy spectra of reflected hydrogen ions from tungsten surface are calculated with a Monte Carlo simulation code ACAT. The results obtained with ACAT have indicated that angular distributions of reflected hydrogen ions show narrow distributions for low-energy incidence such as 50 eV, and energy spectra of reflected ions show sharp peaks around 90% of incident energy. These narrow angular distributions and sharp peaks are favorable for the efficient extraction of negative ions from an ion source equipped with tungsten surface as negative ionization converter. The retained hydrogen atoms in tungsten lead to the reduction in extraction efficiency due to boarded angular distributions.

  12. Recent progress in R&D on tungsten alloys for divertor structural and plasma facing materials

    SciTech Connect (OSTI)

    Wurster, S.; Baluc, N.; Battabyal, M.; Crosby, T.; Du, J.; Garcia-Rosales, C.; Hasegawa, Akira; Hoffmann, A.; Kimura, A.; Kurishita, Hiroaki; Kurtz, Richard J.; Li, H.; Noh, S.; Reiser, J.; Riesch, J.; Rieth, Michael; Setyawan, Wahyu; Walter, M.; You, J. H.; Pippan, R.

    2013-03-13T23:59:59.000Z

    Tungsten materials are candidates for plasma facing components for ITER and DEMO because of their superior thermophysical properties. Knowledge and strategies to improve properties of tungsten-based materials are still under development, as they are not a common structural material such as steel. Consequently, several activities have started in Europe, Japan, USA and China. Research is directed towards manufacturing of new materials based on alloying, microstructure stabilizing and composite formation involving improved processing steps. Beside experimental analyses, work also focuses on computational treatment of open questions, supporting the development of better tungsten materials. Assuming the availability of an ideal material that is ready to use, there remain the questions of inherent safety, the joining of tungsten to steel and the influence of radiation damage. These are topics of increasing interest when the material comes to application.

  13. Tungsten bridge for the low energy ignition of explosive and energetic materials

    DOE Patents [OSTI]

    Benson, David A. (Albuquerque, NM); Bickes, Jr., Robert W. (Albuquerque, NM); Blewer, Robert S. (Albuquerque, NM)

    1990-01-01T23:59:59.000Z

    A tungsten bridge device for the low energy ignition of explosive and energetic materials is disclosed. The device is fabricated on a silicon-on-sapphire substrate which has an insulating bridge element defined therein using standard integrated circuit fabrication techniques. Then, a thin layer of tungsten is selectively deposited on the silicon bridge layer using chemical vapor deposition techniques. Finally, conductive lands are deposited on each end of the tungsten bridge layer to form the device. It has been found that this device exhibits substantially shorter ignition times than standard metal bridges and foil igniting devices. In addition, substantially less energy is required to cause ignition of the tungsten bridge device of the present invention than is required for common metal bridges and foil devices used for the same purpose.

  14. Multiphysics Design and Simulation of a Tungsten-Cermet Nuclear Thermal Rocket

    E-Print Network [OSTI]

    Appel, Bradley

    2012-10-19T23:59:59.000Z

    fuel safety have sparked interest in an NTR core based on tungsten-cermet fuel. This work investigates the capability of modern CFD and neutronics codes to design a cermet NTR, and makes specific recommendations for the configuration of channels...

  15. Tantalum-Tungsten Oxide Thermite Composite Prepared by Sol-Gel Synthesis and Spark Plasma Sintering

    SciTech Connect (OSTI)

    Cervantes, O; Kuntz, J; Gash, A; Munir, Z

    2009-02-13T23:59:59.000Z

    Energetic composite powders consisting of sol-gel derived nanostructured tungsten oxide were produced with various amounts of micrometer-scale tantalum fuel metal. Such energetic composite powders were ignition tested and results show that the powders are not sensitive to friction, spark and/or impact ignition. Initial consolidation experiments, using the High Pressure Spark Plasma Sintering (HPSPS) technique, on the sol-gel derived nanostructured tungsten oxide produced samples with higher relative density than can be achieved with commercially available tungsten oxide. The sol-gel derived nanostructured tungsten oxide with immobilized tantalum fuel metal (Ta - WO{sub 3}) energetic composite was consolidated to a density of 9.17 g.cm{sup -3} or 93% relative density. In addition those parts were consolidated without significant pre-reaction of the constituents, thus the sample retained its stored chemical energy.

  16. VEE-0076- In the Matter of Green Mountain Energy Company

    Broader source: Energy.gov [DOE]

    On August 23, 2000, the Green Mountain Energy Company (Green Mountain) of Austin, Texas, filed an Application for Exception with the Office of Hearings and Appeals of the Department of Energy (DOE)...

  17. Sand Mountain Electric Cooperative- Residential Heat Pump Loan Program

    Broader source: Energy.gov [DOE]

    The Sand Mountain Electric Cooperative offers a heat pump loan program to eligible residential members. To qualify, members must have had power with Sand Mountain Electric Cooperative for at least...

  18. Variation of Treeline Mountain Birch Establishment Under Herbivory Pressure

    E-Print Network [OSTI]

    Granberg, Tynan

    2012-10-19T23:59:59.000Z

    be attributable to the impacts of herbivores. This study investigates the interacting effects of herbivory, climate, and understory vegetation on mountain birch establishment at treeline in the Scandes Mountains of northern Sweden. An extensive...

  19. ROCKY MOUNTAIN ASPEN FOREST AND WOODLAND extent exaggerated for display

    E-Print Network [OSTI]

    ROCKY MOUNTAIN ASPEN FOREST AND WOODLAND R.Rondeau extent exaggerated for display POPULUS. The herbaceous layers may be lush and diverse. Common graminoids may include Bromus ROCKY MOUNTAIN ASPEN WOODLAND

  20. Drift Natural Convection and Seepage at the Yucca Mountain Repository

    E-Print Network [OSTI]

    Halecky, Nicholaus Eugene

    2010-01-01T23:59:59.000Z

    in situ heater test. Nuclear Technology, [81] SD Dunn, B.Yucca Mountain, Nevada. Nuclear Technology, 148(2):138–150,at Yucca Mountain. Nuclear Technology, 63(1):147– [66

  1. Kinetics of thermal decomposition of molybdenum carbonyl on a tungsten surface

    SciTech Connect (OSTI)

    Baev, A.K.; Podoprigora, V.I. [S.M. Kirov Belorussian Technological Inst., Minsk (Russian Federation)

    1993-04-20T23:59:59.000Z

    Thermal decomposition of Mo(CO){sub 6} on the surface of pyrolytic tungsten is performed under quasi-stationary conditions. The analysis of kinetics shows the reaction to occur in a kinetic region. The activation energy of Mo(CO){sub 6} decomposition on tungsten substrate calculated according to the Arrhenius equation is 63.7 {plus_minus} 3.0 kJ/mole. 4 refs., 1 fig., 1 tab.

  2. Molybdenum-copper and tungsten-copper alloys and method of making

    DOE Patents [OSTI]

    Schmidt, Frederick A. (Ames, IA); Verhoeven, John D. (Ames, IA); Gibson, Edwin D. (Ames, IA)

    1989-05-23T23:59:59.000Z

    Molybdenum-copper and tungsten-copper alloys are prepared by a consumable electrode method in which the electrode consists of a copper matrix with embedded strips of refractory molybdenum or tungsten. The electrode is progressively melted at its lower end with a superatmospheric inert gas pressure maintained around the liquifying electrode. The inert gas pressure is sufficiently above the vapor pressure of copper at the liquidus temperature of the alloy being formed to suppress boiling of liquid copper.

  3. Molybdenum-copper and tungsten-copper alloys and method of making

    DOE Patents [OSTI]

    Schmidt, F.A.; Verhoeven, J.D.; Gibson, E.D.

    1989-05-23T23:59:59.000Z

    Molybdenum-copper and tungsten-copper alloys are prepared by a consumable electrode method in which the electrode consists of a copper matrix with embedded strips of refractory molybdenum or tungsten. The electrode is progressively melted at its lower end with a superatmospheric inert gas pressure maintained around the liquefying electrode. The inert gas pressure is sufficiently above the vapor pressure of copper at the liquidus temperature of the alloy being formed to suppress boiling of liquid copper. 6 figs.

  4. Geomorphic surfaces in the northwestern Klamath Mountains, California and Oregon

    SciTech Connect (OSTI)

    Baldwin, K.S. (Forest Service, Happy Camp, CA (United States)); Ricks, C.L. (Forest Service, Gold Beach, OR (United States))

    1993-04-01T23:59:59.000Z

    Thick, residual, colluvial and alluvial soils derived from ophiolitic rocks mantle at least four geomorphic surfaces in the Siskiyou and marble mountains, in northwestern California and Illinois Valley, in southwestern Oregon. Analysis of digital elevation data provides constraints on the distribution and origin of these surfaces. Because of the geomorphic expression and soil mechanical properties of the surfaces, a map of slope gradients less than 22 degrees closely approximates the distribution of geomorphic surfaces as they are known from field observations. Preliminary definition of individual surfaces is based upon classification of the slop-map by elevation ranges. The Klamath Peneplain'' of Diller (1902) and associated soils, recently referred to as Klamath Saprolite'', are recognized near summit elevation (1,500 meters) across the area. Regional uplift and erosion has resulted in extensive, large earthflow landslides derived from these soils. Alluvial and residual deposits on the floor of the Illinois Valley occur at the same elevation (300 meters) as incised alluvial and colluvial terrace deposits along the Klamath River and tributary streams. At least two additional surfaces have been identified in the Siskiyou and Marble Mountains at approximately elevation 750 and 1,000 meters. Analysis of digital elevation data, combined with the map of earthflow landslides, allows rapid preliminary mapping of geomorphic surfaces in this terrain.

  5. Vegetation Description, Rare Plant Inventory, and Vegetation Monitoring for Craig Mountain, Idaho.

    SciTech Connect (OSTI)

    Mancuso, Michael; Moseley, Robert

    1994-12-01T23:59:59.000Z

    The Craig Mountain Wildlife Mitigation Area was purchased by Bonneville Power Administration (BPA) as partial mitigation for wildlife losses incurred with the inundation of Dworshak Reservoir on the North Fork Clearwater River. Upon completion of the National Environmental Protection Act (NEPA) process, it is proposed that title to mitigation lands will be given to the Idaho Department of Fish and Game (IDFG). Craig Mountain is located at the northern end of the Hells Canyon Ecosystem. It encompasses the plateau and steep canyon slopes extending from the confluence of the Snake and Salmon rivers, northward to near Waha, south of Lewiston, Idaho. The forested summit of Craig Mountain is characterized by gently rolling terrain. The highlands dramatically break into the canyons of the Snake and Salmon rivers at approximately the 4,700 foot contour. The highly dissected canyons are dominated by grassland slopes containing a mosaic of shrubfield, riparian, and woodland habitats. During the 1993 and 1994 field seasons, wildlife, habitat/vegetation, timber, and other resources were systematically inventoried at Craig Mountain to provide Fish and Game managers with information needed to draft an ecologically-based management plan. The results of the habitat/vegetation portion of the inventory are contained in this report. The responsibilities for the Craig Mountain project included: (1) vegetation data collection, and vegetation classification, to help produce a GIS-generated Craig Mountain vegetation map, (2) to determine the distribution and abundance of rare plants populations and make recommendations concerning their management, and (3) to establish a vegetation monitoring program to evaluate the effects of Fish and Game management actions, and to assess progress towards meeting habitat mitigation goals.

  6. Tungsten coating for improved wear resistance and reliability of microelectromechanical devices

    DOE Patents [OSTI]

    Fleming, James G. (Albuquerque, NM); Mani, Seethambal S. (Albuquerque, NM); Sniegowski, Jeffry J. (Edgewood, NM); Blewer, Robert S. (Albuquerque, NM)

    2001-01-01T23:59:59.000Z

    A process is disclosed whereby a 5-50-nanometer-thick conformal tungsten coating can be formed over exposed semiconductor surfaces (e.g. silicon, germanium or silicon carbide) within a microelectromechanical (MEM) device for improved wear resistance and reliability. The tungsten coating is formed after cleaning the semiconductor surfaces to remove any organic material and oxide film from the surface. A final in situ cleaning step is performed by heating a substrate containing the MEM device to a temperature in the range of 200-600 .degree. C. in the presence of gaseous nitrogen trifluoride (NF.sub.3). The tungsten coating can then be formed by a chemical reaction between the semiconductor surfaces and tungsten hexafluoride (WF.sub.6) at an elevated temperature, preferably about 450.degree. C. The tungsten deposition process is self-limiting and covers all exposed semiconductor surfaces including surfaces in close contact. The present invention can be applied to many different types of MEM devices including microrelays, micromirrors and microengines. Additionally, the tungsten wear-resistant coating of the present invention can be used to enhance the hardness, wear resistance, electrical conductivity, optical reflectivity and chemical inertness of one or more semiconductor surfaces within a MEM device.

  7. Growth study and photocatalytic properties of Co-doped tungsten oxide mesocrystals

    SciTech Connect (OSTI)

    Sun, Shibin [College of Logistics Engineering, Shanghai Maritime University, Shanghai 200135 (China) [College of Logistics Engineering, Shanghai Maritime University, Shanghai 200135 (China); College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061 (China); Chang, Xueting, E-mail: xuetingchang@yahoo.cn [College of Logistics Engineering, Shanghai Maritime University, Shanghai 200135 (China)] [College of Logistics Engineering, Shanghai Maritime University, Shanghai 200135 (China); Li, Zhenjiang [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061 (China)] [College of Electromechanical Engineering, Qingdao University of Science and Technology, Qingdao 266061 (China)

    2012-11-15T23:59:59.000Z

    Cobalt-doped tungsten oxide mesocrystals with different morphologies have been successfully generated using a solvothermal method with tungsten hexachloride and cobalt chloride salts as precursors. The resulting mesocrystals were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, Brunauer-Emmet-Teller analysis of nitrogen sorptometer, and UV-vis diffuse reflectance spectroscopy. The photocatalytic properties of the cobalt-doped tungsten oxide mesocrystals were evaluated on the basis of their ability to degrade methyl orange in an aqueous solution under simulated sunlight irradiation. Results showed that the cobalt doping had obvious effect on the morphologies of the final products, and lenticular and blocky cobalt-doped tungsten oxide mesocrystals could be obtained with 1.0 wt.% and 2.0 wt.% cobalt doping, respectively. The cobalt-doped tungsten oxides exhibited superior photocatalytic activities to that of the undoped tungsten oxide. - Graphical abstract: Schematic illustrations of the growth of the bundled nanowires, lenticular mesocrystals, and blocky mesocrystals. Highlights: Black-Right-Pointing-Pointer Co-doped W{sub 18}O{sub 49} mesocrystals were synthesized using a solvothermal method. Black-Right-Pointing-Pointer The Co doping has obvious effect on the morphology of the final mesocrystals. Black-Right-Pointing-Pointer The Co-doped W{sub 18}O{sub 49} exhibited superior photocatalytic activity to the undoped W{sub 18}O{sub 49}.

  8. Study on the oxidation and reduction of tungsten surface for sub-50 nm patterning process

    SciTech Connect (OSTI)

    Kim, Jong Kyu; Nam, Seok Woo; Cho, Sung Il; Jhon, Myung S.; Min, Kyung Suk; Kim, Chan Kyu; Jung, Ho Bum; Yeom, Geun Young [Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711, South Korea and Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of); Memory Division Semiconductor Business, Samsung Electronics, San No. 16 Banwol-Ri, Taean-Eup, Hwasung-City, Gyeonggi-Do 449-711 (Korea, Republic of); Department of Chemical Engineering and Data Storage Systems Center, Carnegie Mellon University, Pittsburgh, Pennsylvania 15213 (United States); Department of Advanced Materials Science and Engineering, Sungkyunkwan University, Suwon, Gyeonggi-do 440-746 (Korea, Republic of)

    2012-11-15T23:59:59.000Z

    The oxidation characteristics of tungsten line pattern during the carbon-based mask-layer removal process using oxygen plasmas have been investigated for sub-50 nm patterning processes, in addition to the reduction characteristics of the WO{sub x} layer formed on the tungsten line surface using hydrogen plasmas. The surface oxidation of tungsten lines during the mask layer removal process could be minimized by using low-temperature (300 K) plasma processing for the removal of the carbon-based material. Using this technique, the thickness of WO{sub x} on the tungsten line could be decreased to 25% compared to results from high-temperature processing. The WO{sub x} layer could also be completely removed at a low temperature of 300 K using a hydrogen plasma by supplying bias power to the tungsten substrate to provide a activation energy for the reduction. When this oxidation and reduction technique was applied to actual 40-nm-CD device processing, the complete removal of WO{sub x} formed on the sidewall of tungsten line could be observed.

  9. Mountain Home Well - Borehole Geophysics Database

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Shervais, John

    The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Mountain Home drill hole is located along the western plain and documents older basalts overlain by sediment. Data submitted by project collaborator Doug Schmitt, University of Alberta

  10. Mountain Home Well - Borehole Geophysics Database

    SciTech Connect (OSTI)

    Shervais, John

    2012-11-11T23:59:59.000Z

    The Snake River Plain (SRP), Idaho, hosts potential geothermal resources due to elevated groundwater temperatures associated with the thermal anomaly Yellowstone-Snake River hotspot. Project HOTSPOT has coordinated international institutions and organizations to understand subsurface stratigraphy and assess geothermal potential. Over 5.9km of core were drilled from three boreholes within the SRP in an attempt to acquire continuous core documenting the volcanic and sedimentary record of the hotspot: (1) Kimama, (2) Kimberly, and (3) Mountain Home. The Mountain Home drill hole is located along the western plain and documents older basalts overlain by sediment. Data submitted by project collaborator Doug Schmitt, University of Alberta

  11. Mountain Island Energy LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu anMicrogreenMoon LakeMountain Electric Coop, Inc JumpMountain

  12. Research Summary Youth mountain biking at Bedgebury Active England project

    E-Print Network [OSTI]

    and personal challenge. There were strong connections between youth mountain biking identities and the use) Lifestyle, identity and young people's experiences of mountain biking. Forestry Commission Research Note 7Research Summary Youth mountain biking at Bedgebury Active England project In 2005/6, the Forestry

  13. Report of early site suitability evaluation of the potential repository site at Yucca Mountain, Nevada; Yucca Mountain Site Characterization Project

    SciTech Connect (OSTI)

    Younker, J.L.; Andrews, W.B.; Fasano, G.A.; Herrington, C.C.; Mattson, S.R.; Murray, R.C. [Science Applications International Corp., Las Vegas, NV (United States); Ballou, L.B.; Revelli, M.A. [Lawrence Livermore National Lab., CA (United States); Ducharme, A.R.; Shephard, L.E. [Sandia National Labs., Albuquerque, NM (United States); Dudley, W.W.; Hoxie, D.T. [Geological Survey, Denver, CO (United States); Herbst, R.J.; Patera, E.A. [Los Alamos National Lab., NM (United States); Judd, B.R. [Decision Analysis Co., Portola Valley, CA (United States); Docka, J.A.; Rickertsen, L.D. [Weston Technical Associates, Washington, DC (United States)

    1992-01-01T23:59:59.000Z

    This study evaluated the technical suitability of Yucca Mountain, Nevada, as a potential site for a mined geologic repository for the permanent disposal of radioactive waste. The evaluation was conducted primarily to determine early in the site characterization program if there are any features or conditions at the site that indicate it is unsuitable for repository development. A secondary purpose was to determine the status of knowledge in the major technical areas that affect the suitability of the site. This early site suitability evaluation (ESSE) was conducted by a team of technical personnel at the request of the Associate Director of the US Department of Energy (DOE) Office of Geologic Disposal, a unit within the DOE`s Office of Civilian Radioactive Waste Management. The Yucca Mountain site has been the subject of such evaluations for over a decade. In 1983, the site was evaluated as part of a screening process to identify potentially acceptable sites. The site was evaluated in greater detail and found suitable for site characterization as part of the Environmental Assessment (EA) (DOE, 1986) required by the Nuclear Waste Policy Act of 1982 (NWPA). Additional site data were compiled during the preparation of the Site Characterization Plan (SCP) (DOE, 1988a). This early site suitability evaluation has considered information that was used in preparing both-documents, along with recent information obtained since the EA and SCP were published. This body of information is referred to in this report as ``current information`` or ``available evidence.``

  14. B(C6F5)3 Activation of Oxo Tungsten Complexes That Are Relevant to Olefin Metathesis

    E-Print Network [OSTI]

    Müller, Peter

    B(C6F5)3 Activation of Oxo Tungsten Complexes That Are Relevant to Olefin Metathesis Dmitry V Information ABSTRACT: We have found that coordination of B(C6F5)3 to an oxo ligand in tungsten oxo alkylidene reactions between a relatively well behaved Lewis acid (B(C6F5)3) and a variety of tungsten oxo complexes

  15. Reduced ternary molybdenum and tungsten sulfides and hydroprocessing catalysis therewith

    DOE Patents [OSTI]

    Hilsenbeck, S.J.; McCarley, R.E.; Schrader, G.L.; Xie, X.B.

    1999-02-16T23:59:59.000Z

    New amorphous molybdenum/tungsten sulfides with the general formula M{sup n+}{sub 2x/n}(L{sub 6}S{sub 8})S{sub x}, where L is molybdenum or tungsten and M is a ternary metal, has been developed. Characterization of these amorphous materials by chemical and spectroscopic methods (IR, Raman, PES) shows that the (M{sub 6}S{sub 8}){sup 0} cluster units are present. Vacuum thermolysis of the amorphous Na{sub 2x}(Mo{sub 6}S{sub 8})S{sub x}{hor_ellipsis}yMeOH first produces poorly crystalline NaMo{sub 6}S{sub 8} by disproportionation at 800 C and well-crystallized NaMo{sub 6}S{sub 8} at {>=} 900 C. Ion-exchange of the sodium material in methanol with soluble M{sup 2+} and M{sup 3+} salts (M=Sn, Co, Ni, Pb, La, Ho) produces the M{sup n+}{sub 2x/n}(Mo{sub 6}S{sub 8})S{sub x}{hor_ellipsis}yMeOH compounds. Additionally, the new reduced ternary molybdenum sulfides with the general formula M{sup n+}{sub 2x/n}Mo{sub 6}S{sub 8+x}(MeOH){sub y}[MMOS] (M=Sn, Co, Ni) is an effective hydrodesulfurization (HDS) catalyst both as-prepared and after a variety of pretreatment conditions. Under specified pretreatment conditions with flowing hydrogen gas, the SnMoS type catalyst can be stabilized, and while still amorphous, can be considered as ``Chevrel phase-like`` in that both contain Mo{sub 6}S{sub 8} cluster units. Furthermore, the small cation NiMoS and CoMoS type pretreated catalyst is shown to be very active HDS catalysts with rates that exceeded the model unpromoted and cobalt-promoted MoS{sub 2} catalysts. 9 figs.

  16. Reduced ternary molybdenum and tungsten sulfides and hydroprocessing catalysis therewith

    DOE Patents [OSTI]

    Hilsenbeck, Shane J. (Ames, IA); McCarley, Robert E. (Ames, IA); Schrader, Glenn L. (Ames, IA); Xie, Xiaobing (College Station, TX)

    1999-02-16T23:59:59.000Z

    New amorphous molybdenum/tungsten sulfides with the general formula M.sup.n+.sub.2x/n (L.sub.6 S.sub.8)S.sub.x, where L is molybdenum or tungsten and M is a ternary metal, has been developed. Characterization of these amorphous materials by chemical and spectroscopic methods (IR, Raman, PES) shows that the (M.sub.6 S.sub.8).sup.0 cluster units are present. Vacuum thermolysis of the amorphous Na.sub.2x (Mo.sub.6 S.sub.8)S.sub.x .multidot.yMeOH first produces poorly crystalline NaMo.sub.6 S.sub.8 by disproportionation at 800.degree. C. and well-crystallized NaMo.sub.6 S.sub.8 at .gtoreq. 900.degree. C. Ion-exchange of the sodium material in methanol with soluble M.sup.2+ and M.sup.3+ salts (M=Sn, Co, Ni, Pb, La, Ho) produces the M.sup.n+.sub.2x/n (Mo.sub.6 S.sub.8)S.sub.x .multidot.yMeOH compounds. Additionally, the new reduced ternary molybdenum sulfides with the general formula M.sup.n+.sub.2x/n Mo.sub.6 S.sub.8+x (MeOH).sub.y ›MMOS! (M=Sn, Co, Ni) is an effective hydrodesulfurization (HDS) catalyst both as-prepared and after a variety of pretreatment conditions. Under specified pretreatment conditions with flowing hydrogen gas, the SnMoS type catalyst can be stabilized, and while still amorphous, can be considered as "Chevrel phase-like" in that both contain Mo.sub.6 S.sub.8 cluster units. Furthermore, the small cation NiMoS and CoMoS type pretreated catalyst showed to be very active HDS catalysts with rates that exceeded the model unpromoted and cobalt-promoted MoS.sub.2 catalysts.

  17. CITY OF MOUNTAIN VIEW April 12, 2011 .

    E-Print Network [OSTI]

    Ordinance ordinance? Projected effective date: September 1, 2011 Green building or stand-alone energy Energy Ordinance in Combination with Green Building ordinance? Do minimum energy requirements increase No afterCITY OF MOUNTAIN VIEW April 12, 2011 . CaUfomia Energy Commission Attn: Joe Loyer 1516 Ninth

  18. SOLAR TODAY28 The Green Mountain Energysm

    E-Print Network [OSTI]

    , generates pollution-free, renewable electricity. GreenMountainEnergyCompany BuyingGreenPower-- You of renewable energy technologies. by Blair Swezey and Lori Bird #12;January/February 2003 29 The electricity that we use in the U.S. is primarily generated with coal (52 percent), nuclear (20 percent) and natural

  19. Characterize Eruptive Processes at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    D. Krier

    2004-10-04T23:59:59.000Z

    The purpose of this scientific analysis report, ''Characterize Eruptive Processes at Yucca Mountain, Nevada'', is to present information about natural volcanic systems and the parameters that can be used to model their behavior. This information is used to develop parameter-value distributions appropriate for analysis of the consequences of volcanic eruptions through a repository at Yucca Mountain. This scientific analysis report provides information to four other reports: ''Number of Waste Packages Hit by Igneous Intrusion'', (BSC 2004 [DIRS 170001]); ''Atmospheric Dispersal and Deposition of Tephra from Potential Volcanic Eruption at Yucca Mountain, Nevada'' (BSC 2004 [DIRS 170026]); ''Dike/Drift Interactions'' (BSC 2004 [DIRS 170028]); ''Development of Earthquake Ground Motion Input for Preclosure Seismic Design and Postclosure Performance Assessment of a Geologic Repository at Yucca Mountain, NV'' (BSC 2004 [DIRS 170027], Section 6.5). This report is organized into seven major sections. This section addresses the purpose of this document. Section 2 addresses quality assurance, Section 3 the use of software, Section 4 identifies the requirements that constrain this work, and Section 5 lists assumptions and their rationale. Section 6 presents the details of the scientific analysis and Section 7 summarizes the conclusions reached.

  20. SHEEP MOUNTAIN URANIUM PROJECT CROOKS GAP, WYOMING

    E-Print Network [OSTI]

    SHEEP MOUNTAIN URANIUM PROJECT CROOKS GAP, WYOMING US EPA Project Meeting April 7 2011April 7, 2011/Titan Uranium, VP Development Ā· Deborah LebowAal/EPA Region 8 Air Program Introduction to Titan Uranium USA;PROJECT OVERVIEW Ā·Site LocationĀ·Site Location Ā·Fremont , Wyoming Ā·Existing Uranium Mine Permit 381C

  1. Engineering in a mountain resort town

    E-Print Network [OSTI]

    Waters, Eric W.

    2009-05-15T23:59:59.000Z

    Air Force Academy, and PLC. The first objective was to develop a business plan for a similar company in a mountain community. This provides a useful tool to begin a second career after retirement from the Air Force. The second objective was to build...

  2. Engineering in a mountain resort town

    E-Print Network [OSTI]

    Waters, Eric W

    2008-10-10T23:59:59.000Z

    Air Force Academy, and PLC. The first objective was to develop a business plan for a similar company in a mountain community. This provides a useful tool to begin a second career after retirement from the Air Force. The second objective was to build...

  3. Development of an electron-temperature-dependent interatomic potential for molecular dynamics simulation of tungsten under electronic excitation

    E-Print Network [OSTI]

    Alfč, Dario

    simulation of tungsten under electronic excitation S. Khakshouri,1,* D. Alfč,1,2 and D. M. Duffy1,3 1

  4. Magnetization curves of sintered heavy tungsten alloys for applications in MRI-guided radiotherapy

    SciTech Connect (OSTI)

    Kolling, Stefan [Sydney Medical School, University of Sydney, NSW 2006 (Australia)] [Sydney Medical School, University of Sydney, NSW 2006 (Australia); Oborn, Bradley M. [Illawarra Cancer Care Centre (ICCC), Wollongong, NSW 2500, Australia and Centre for Medical Radiation Physics (CMRP), University of Wollongong, Wollongong, NSW 2500 (Australia)] [Illawarra Cancer Care Centre (ICCC), Wollongong, NSW 2500, Australia and Centre for Medical Radiation Physics (CMRP), University of Wollongong, Wollongong, NSW 2500 (Australia); Keall, Paul J., E-mail: paul.keall@sydney.edu.au [Sydney Medical School, University of Sydney, NSW 2006, Australia and Ingham Institute for Applied Medical Research, Liverpool, NSW 2170 (Australia); Horvat, Joseph [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong, NSW 2500, Australia and School of Physics, University of Wollongong, Wollongong, NSW 2500 (Australia)] [Institute for Superconducting and Electronic Materials, University of Wollongong, Wollongong, NSW 2500, Australia and School of Physics, University of Wollongong, Wollongong, NSW 2500 (Australia)

    2014-06-15T23:59:59.000Z

    Purpose: Due to the current interest in MRI-guided radiotherapy, the magnetic properties of the materials commonly used in radiotherapy are becoming increasingly important. In this paper, measurement results for the magnetization (BH) curves of a range of sintered heavy tungsten alloys used in radiation shielding and collimation are presented. Methods: Sintered heavy tungsten alloys typically contain >90?% tungsten and <10?% of a combination of iron, nickel, and copper binders. Samples of eight different grades of sintered heavy tungsten alloys with varying binder content were investigated. Using a superconducting quantum interference detector magnetometer, the induced magnetic momentm was measured for each sample as a function of applied external field H{sub 0} and the BH curve derived. Results: The iron content of the alloys was found to play a dominant role, directly influencing the magnetizationM and thus the nonlinearity of the BH curve. Generally, the saturation magnetization increased with increasing iron content of the alloy. Furthermore, no measurable magnetization was found for all alloys without iron content, despite containing up to 6% of nickel. For two samples from different manufacturers but with identical quoted nominal elemental composition (95% W, 3.5% Ni, 1.5% Fe), a relative difference in the magnetization of 11%–16% was measured. Conclusions: The measured curves show that the magnetic properties of sintered heavy tungsten alloys strongly depend on the iron content, whereas the addition of nickel in the absence of iron led to no measurable effect. Since a difference in the BH curves for two samples with identical quoted nominal composition from different manufacturers was observed, measuring of the BH curve for each individual batch of heavy tungsten alloys is advisable whenever accurate knowledge of the magnetic properties is crucial. The obtained BH curves can be used in FEM simulations to predict the magnetic impact of sintered heavy tungsten alloys.

  5. Results of Chemical Analyses in Support of Yucca Mountain Studies

    SciTech Connect (OSTI)

    Daniels, Jeanette

    2007-12-11T23:59:59.000Z

    Ground water monitoring for the Nye County Early Warning Drilling Program (NCEWDP) was established to monitor underground water sources of the area and to protect communities surrounding the Nevada Test Site (NTS) from potential radionuclide contamination of these water sources. It provides hydrological information pertaining to groundwater flow patterns and recharge issues in the vicinity of Yucca Mountain. The Harry Reid Center for Environmental Studies (HRC) obtained groundwater samples from select NCEWDP wells shown in Figure 1. These samples were analyzed for major cations, major anions, trace elements, rare earth elements, alkalinity, pH and conductivity. These geochemical results can be used to evaluate the degree of interaction between the aquifers sampled, leading to a thorough mapping of the aquifer system. With increased analysis down gradient of the Yucca Mountain area, evaluations can identify viable groundwater flow paths and establish mixing of the groundwater systems. Tracer tests provide insight into groundwater flow characteristics and transport processes of potential contaminants. These tests are important for contaminant migration issues including safe disposal of hazardous and radioactive materials and remediation of potentially released contaminants. At a minimum, two conservative (non-sorbing) tracers with different diffusion coefficients are used for each tracer test. The tracer test performed under this cooperative agreement utilized fluorinated benzoic acids and halides as conservative tracers. The tracers are of differing size and have differing rates of diffusion into the rock. Larger molecules can not enter the pore spaces that are penetrated by the smaller molecules, therefore larger tracers will travel faster through thegroundwater system. Identical responses of the two tracers indicate no appreciable diffusion into pores of the aquifer system tuff. For the Nye County Tracer Tests, the HRC provided chemical analysis for the tracer test being conducted at site 22. Samples were analyzed for multiple tracers throughout the testing period.

  6. Deformation of a basement corner, Crazy Woman Canyon, northeastern Bighorn Mountains, Wyoming

    E-Print Network [OSTI]

    Smith, Gretchen Louise

    1989-01-01T23:59:59.000Z

    , structures, and fractures and sample collecting in the field area were done during the summers of 1987-1988. Laboratory analysis was accomplished using the facilities of the Center for Tectonophysics and the Department of Geology at Texas ADAM University... the Bighorn Mountain front. Analysis of fracture, foliation, and calcite strain data, and deformation mechanisms suggest that the structures in Crazy Woman Canyon are locally controlled by pre-existing structures in the Precambrian basement. Interpreting...

  7. Spectroscopic constants and potential energy curves of tungsten carbide

    SciTech Connect (OSTI)

    Balasubramanian, K. [Department of Chemistry and Biochemistry, Arizona State University, Tempe, Arizona 85287-1604 (United States)] [Department of Chemistry and Biochemistry, Arizona State University, Tempe, Arizona 85287-1604 (United States)

    2000-05-01T23:59:59.000Z

    Spectroscopic constants (R{sub e},{omega}{sub e},T{sub e},{mu}{sub e}) and potential energy curves for 40 low-lying electronic states of the diatomic tungsten carbide (WC) were obtained using the complete active space multiconfiguration self-consistent field followed by the multireference singles+doubles configuration interaction and full first- and second-order configuration interaction calculations that included up to 6.4 mil configurations. Spin-orbit effects were included through the enhanced relativistic configuration interaction method described here for 28 electronic states of WC lying below {approx}20 000 cm-1. The spin-orbit splitting of the ground state of WC was found to be very large (4394 cm-1). The ground and excited electronic states of the W atom were also computed and were found to be in good agreement with the experimental data. The nature of bonding was analyzed through the composition of orbitals, leading configurations, Mulliken populations, and dipole moments. The dissociation energy of WC was computed including spin-orbit and electron correlation effects. The recent photoelectron spectra of WC{sup -} were assigned on the basis of our computed results. (c) 2000 American Institute of Physics.

  8. Activation Energy of Tantalum-Tungsten Oxide Thermite Reaction

    SciTech Connect (OSTI)

    Cervantes, O; Kuntz, J; Gash, A; Munir, Z

    2010-02-25T23:59:59.000Z

    The activation energy of a high melting temperature sol-gel (SG) derived tantalum-tungsten oxide thermite composite was determined using the Kissinger isoconversion method. The SG derived powder was consolidated using the High Pressure Spark Plasma Sintering (HPSPS) technique to 300 and 400 C to produce pellets with dimensions of 5 mm diameter by 1.5 mm height. A custom built ignition setup was developed to measure ignition temperatures at high heating rates (500-2000 C {center_dot} min{sup -1}). Such heating rates were required in order to ignite the thermite composite. Unlike the 400 C samples, results show that the samples consolidated to 300 C undergo an abrupt change in temperature response prior to ignition. This change in temperature response has been attributed to the crystallization of the amorphous WO{sub 3} in the SG derived Ta-WO{sub 3} thermite composite and not to a pre-ignition reaction between the constituents. Ignition temperatures for the Ta-WO{sub 3} thermite ranged from approximately 465-670 C. The activation energy of the SG derived Ta-WO{sup 3} thermite composite consolidated to 300 and 400 C were determined to be 37.787 {+-} 1.58 kJ {center_dot} mol{sup -1} and 57.381 {+-} 2.26 kJ {center_dot} mol{sup -1}, respectively.

  9. Adsorption of carbonyl sulfide on nickel and tungsten films

    SciTech Connect (OSTI)

    Saleh, J.M.; Nasser, F.A.K.

    1985-07-18T23:59:59.000Z

    The interaction of carbonyl sulfide with evaporated nickel and tungsten films has been investigated in the temperature range 195-450 K using gas pressures ranging from 1 to 13 N m/sup -2/. Rapid but mainly associative chemisorption of COS occurred on both metals at 195 K. Further adsorption of COS on W at temperatures 293-450 K was extremely slow and accompanied by more CO desorption than COS adsorbed. Sulfidation of Ni film by COS occurred at temperatures greater than or equal to 293 K with the liberation of carbon monoxide. The rate of adsorption increased with temperature but was independent of COS pressure. The activation energy (E/sub x/) increased with extent (X) of sulfidation to a limiting value of 97 kJ mol/sup -1/. A linear relationship was obtained from the plot of E/sub x/ against 1/X, suggesting the applicability of Cabrera-Mott theory to the sulfidation of Ni film by COS. 20 references, 2 figures, 1 table.

  10. DISPLACEMENT CASCADE SIMULATION IN TUNGSTEN AT 1025 K

    SciTech Connect (OSTI)

    Setyawan, Wahyu; Nandipati, Giridhar; Roche, Kenneth J.; Heinisch, Howard L.; Kurtz, Richard J.; Wirth, Brian D.

    2013-09-30T23:59:59.000Z

    Molecular dynamics simulation was employed to investigate the irradiation damage properties of bulk tungsten at 1025 K (0.25 melting temperature). A comprehensive data set of primary cascade damage was generated up to primary knock-on atom (PKA) energies 100 keV. The dependence of the number of surviving Frenkel pairs (NFP) on the PKA energy (E) exhibits three different characteristic domains presumably related to the different cascade morphologies that form. The low-energy regime < 0.2 keV is characterized by a hit-or-miss type of Frenkel pair (FP) production near the displacement threshold energy of 128 eV. The middle regime 0.3 – 30 keV exhibits a sublinear dependence of log(NFP) vs log(E) associated with compact cascade morphology with a slope of 0.73. Above 30 keV, the cascade morphology consists of complex branches or interconnected damage regions. In this extended morphology, large interstitial clusters form from superposition of interstitials from nearby damage regions. Strong clustering above 30 keV results in a superlinear dependence of log(NFP) vs log(E) with a slope of 1.365. At 100 keV, an interstitial cluster of size 92 and a vacancy cluster of size 114 were observed.

  11. Yucca Mountain Biological Resources Monitoring Program. Progress report, January 1994--December 1994

    SciTech Connect (OSTI)

    NONE

    1995-07-01T23:59:59.000Z

    The US Department of Energy (DOE) is required by the Nuclear Waste Policy Act of 1982 (as amended in 1987) to study and characterize the suitability of Yucca Mountain as a potential geological repository for high-level nuclear waste. During site characterization, the DOE will conduct a variety of geotechnical, geochemical, geological, and hydrological studies to determine the suitability of Yucca Mountain as a potential repository. To ensure that site characterization activities do not adversely affect the environment at Yucca Mountain, a program has been implemented to monitor and mitigate potential impacts and ensure activities comply with applicable environmental regulations. This report describes the activities and accomplishments of EG and G Energy Measurements, Inc. (EG and G/EM) from January 1994 through December 1994 for six program areas within the Terrestrial Ecosystem component of the environmental program for the Yucca Mountain Site Characterization Project (YMP): Site Characterization Effects, Desert Tortoises (Gopherus agassizii), Habitat Reclamation, Monitoring and Mitigation, Radiological Monitoring, and Biological Support.

  12. HighwayForestCoast Inside City Tall BuildingStreetOpenCountryMountain Oliva and Torralba, 2001

    E-Print Network [OSTI]

    Xiao, Jianxiong

    HighwayForestCoast Inside City Tall BuildingStreetOpenCountryMountain Oliva and Torralba, 2001 or designed several state-of-art features that are potentially useful for scene classification, and several cellar barrel storage discotheque harbor classroom electrical substation (74%) industrial area oil

  13. In vivo corrosion, tumor outcome, and microarray gene expression for two types of muscle-implanted tungsten alloys

    SciTech Connect (OSTI)

    Schuster, B.E. [U.S. Army Research Laboratory, Weapons and Materials Research Directorate, B434 Mulberry Road, Aberdeen Proving Ground, MD 21005-5609 (United States)] [U.S. Army Research Laboratory, Weapons and Materials Research Directorate, B434 Mulberry Road, Aberdeen Proving Ground, MD 21005-5609 (United States); Roszell, L.E. [U.S. Army Institute of Public Health, 5158 Blackhawk Road, Aberdeen Proving Ground, MD 21010?5403 (United States)] [U.S. Army Institute of Public Health, 5158 Blackhawk Road, Aberdeen Proving Ground, MD 21010?5403 (United States); Murr, L.E.; Ramirez, D.A. [Department of Metallurgical and Materials Engineering, University of Texas, El Paso, TX 79968 (United States)] [Department of Metallurgical and Materials Engineering, University of Texas, El Paso, TX 79968 (United States); Demaree, J.D. [U.S. Army Research Laboratory, Weapons and Materials Research Directorate, B434 Mulberry Road, Aberdeen Proving Ground, MD 21005-5609 (United States)] [U.S. Army Research Laboratory, Weapons and Materials Research Directorate, B434 Mulberry Road, Aberdeen Proving Ground, MD 21005-5609 (United States); Klotz, B.R. [Dynamic Science Inc., Aberdeen Proving Ground, MD 21005?5609 (United States)] [Dynamic Science Inc., Aberdeen Proving Ground, MD 21005?5609 (United States); Rosencrance, A.B.; Dennis, W.E. [U.S. Army Center for Environmental Health Research, Department of Chemistry, Ft. Detrick, MD 21702?5010 (United States)] [U.S. Army Center for Environmental Health Research, Department of Chemistry, Ft. Detrick, MD 21702?5010 (United States); Bao, W. [SAS Institute, Inc. SAS Campus Drive, Cary, NC 27513 (United States)] [SAS Institute, Inc. SAS Campus Drive, Cary, NC 27513 (United States); Perkins, E.J. [U.S. Army Engineer Research and Development Center, 3909 Hall Ferry Road, Vicksburg MS 39180 (United States)] [U.S. Army Engineer Research and Development Center, 3909 Hall Ferry Road, Vicksburg MS 39180 (United States); Dillman, J.F. [U.S. Army Medical Research Institute of Chemical Defense, 3100 Ricketts Point Road, Aberdeen Proving Ground, MD 21010?5400 (United States)] [U.S. Army Medical Research Institute of Chemical Defense, 3100 Ricketts Point Road, Aberdeen Proving Ground, MD 21010?5400 (United States); Bannon, D.I., E-mail: desmond.bannon@us.army.mil [U.S. Army Institute of Public Health, 5158 Blackhawk Road, Aberdeen Proving Ground, MD 21010?5403 (United States)

    2012-11-15T23:59:59.000Z

    Tungsten alloys are composed of tungsten microparticles embedded in a solid matrix of transition metals such as nickel, cobalt, or iron. To understand the toxicology of these alloys, male F344 rats were intramuscularly implanted with pellets of tungsten/nickel/cobalt, tungsten/nickel/iron, or pure tungsten, with tantalum pellets as a negative control. Between 6 and 12 months, aggressive rhabdomyosarcomas formed around tungsten/nickel/cobalt pellets, while those of tungsten/nickel/iron or pure tungsten did not cause cancers. Electron microscopy showed a progressive corrosion of the matrix phase of tungsten/nickel/cobalt pellets over 6 months, accompanied by high urinary concentrations of nickel and cobalt. In contrast, non-carcinogenic tungsten/nickel/iron pellets were minimally corroded and urinary metals were low; these pellets having developed a surface oxide layer in vivo that may have restricted the mobilization of carcinogenic nickel. Microarray analysis of tumors revealed large changes in gene expression compared with normal muscle, with biological processes involving the cell cycle significantly up?regulated and those involved with muscle development and differentiation significantly down?regulated. Top KEGG pathways disrupted were adherens junction, p53 signaling, and the cell cycle. Chromosomal enrichment analysis of genes showed a highly significant impact at cytoband 7q22 (chromosome 7) which included mouse double minute (MDM2) and cyclin?dependant kinase (CDK4) as well as other genes associated with human sarcomas. In conclusion, the tumorigenic potential of implanted tungsten alloys is related to mobilization of carcinogenic metals nickel and cobalt from corroding pellets, while gene expression changes in the consequent tumors are similar to radiation induced animal sarcomas as well as sporadic human sarcomas. -- Highlights: ? Tungsten/nickel/cobalt, tungsten/nickel/iron, and pure tungsten were studied. ? Male Fischer rats implanted with pellets in gastrocnemius muscle of each hind leg. ? Aggressive rhabdomyosarcomas developed from tungsten/nickel/cobalt pellets only. ? Microarray gene expression analysis was carried out on selected tumors. ? Pellet degradation, urinary metal concentration, and sarcoma were correlated.

  14. In vitro profiling of epigenetic modifications underlying heavy metal toxicity of tungsten-alloy and its components

    SciTech Connect (OSTI)

    Verma, Ranjana, E-mail: Ranjana.Verma.CTR@usuhs.mil [Anatomy, Physiology and Genetics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Center for Neuroscience and Regenerative Medicine, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Xu, Xiufen, E-mail: Xiufen.Xu.CTR@usuhs.mil [Anatomy, Physiology and Genetics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Jaiswal, Manoj K., E-mail: Manoj.Jaiswal.CTR@usuhs.mil [Anatomy, Physiology and Genetics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Center for Neuroscience and Regenerative Medicine, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Olsen, Cara, E-mail: colsen@usuhs.mil [Department of Preventive Medicine and Biometrics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Mears, David, E-mail: dmears@usuhs.mil [Anatomy, Physiology and Genetics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Caretti, Giuseppina, E-mail: giuseppina.caretti@unimi.it [Department of Biomolecular Sciences and Biotechnology, University of Milan (Italy); Galdzicki, Zygmunt, E-mail: zgaldzicki@usuhs.mil [Anatomy, Physiology and Genetics, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States); Center for Neuroscience and Regenerative Medicine, Uniformed Services University of the Health Sciences, Bethesda, MD 20814 (United States)

    2011-06-15T23:59:59.000Z

    Tungsten-alloy has carcinogenic potential as demonstrated by cancer development in rats with intramuscular implanted tungsten-alloy pellets. This suggests a potential involvement of epigenetic events previously implicated as environmental triggers of cancer. Here, we tested metal induced cytotoxicity and epigenetic modifications including H3 acetylation, H3-Ser10 phosphorylation and H3-K4 trimethylation. We exposed human embryonic kidney (HEK293), human neuroepithelioma (SKNMC), and mouse myoblast (C2C12) cultures for 1-day and hippocampal primary neuronal cultures for 1-week to 50-200 {mu}g/ml of tungsten-alloy (91% tungsten/6% nickel/3% cobalt), tungsten, nickel, and cobalt. We also examined the potential role of intracellular calcium in metal mediated histone modifications by addition of calcium channel blockers/chelators to the metal solutions. Tungsten and its alloy showed cytotoxicity at concentrations > 50 {mu}g/ml, while we found significant toxicity with cobalt and nickel for most tested concentrations. Diverse cell-specific toxic effects were observed, with C2C12 being relatively resistant to tungsten-alloy mediated toxic impact. Tungsten-alloy, but not tungsten, caused almost complete dephosphorylation of H3-Ser10 in C2C12 and hippocampal primary neuronal cultures with H3-hypoacetylation in C2C12. Dramatic H3-Ser10 dephosphorylation was found in all cobalt treated cultures with a decrease in H3 pan-acetylation in C2C12, SKNMC and HEK293. Trimethylation of H3-K4 was not affected. Both tungsten-alloy and cobalt mediated H3-Ser10 dephosphorylation were reversed with BAPTA-AM, highlighting the role of intracellular calcium, confirmed with 2-photon calcium imaging. In summary, our results for the first time reveal epigenetic modifications triggered by tungsten-alloy exposure in C2C12 and hippocampal primary neuronal cultures suggesting the underlying synergistic effects of tungsten, nickel and cobalt mediated by changes in intracellular calcium homeostasis and buffering. - Highlights: > Tungsten-alloy caused H3-Ser10 dephosphorylation in C2C12 and hippocampal primary cultures. > Dramatic H3-Ser10 dephosphorylation was found in all cobalt treated cultures. > C2C12 cultures exposed to tungsten-alloy or cobalt exhibited decrease in H3 pan-acetylation. > Tungsten-alloy and cobalt mediated H3-Ser10 dephosphorylation was reversed with BAPTA-AM. > These epigenetic modifications were mediated by changes in calcium homeostasis and buffering.

  15. Effect of interfacial interactions on the thermal conductivity and interfacial thermal conductance in tungsten–graphene layered structure

    SciTech Connect (OSTI)

    Jagannadham, K., E-mail: jag-kasichainula@ncsu.edu [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695 (United States)

    2014-09-01T23:59:59.000Z

    Graphene film was deposited by microwave plasma assisted deposition on polished oxygen free high conductivity copper foils. Tungsten–graphene layered film was formed by deposition of tungsten film by magnetron sputtering on the graphene covered copper foils. Tungsten film was also deposited directly on copper foil without graphene as the intermediate film. The tungsten–graphene–copper samples were heated at different temperatures up to 900?°C in argon atmosphere to form an interfacial tungsten carbide film. Tungsten film deposited on thicker graphene platelets dispersed on silicon wafer was also heated at 900?°C to identify the formation of tungsten carbide film by reaction of tungsten with graphene platelets. The films were characterized by scanning electron microscopy, Raman spectroscopy, and x-ray diffraction. It was found that tungsten carbide film formed at the interface upon heating only above 650?°C. Transient thermoreflectance signal from the tungsten film surface on the samples was collected and modeled using one-dimensional heat equation. The experimental and modeled results showed that the presence of graphene at the interface reduced the cross-plane effective thermal conductivity and the interfacial thermal conductance of the layer structure. Heating at 650 and 900?°C in argon further reduced the cross-plane thermal conductivity and interface thermal conductance as a result of formation nanocrystalline tungsten carbide at the interface leading to separation and formation of voids. The present results emphasize that interfacial interactions between graphene and carbide forming bcc and hcp elements will reduce the cross-plane effective thermal conductivity in composites.

  16. Wildlife Inventory, Craig Mountain, Idaho.

    SciTech Connect (OSTI)

    Cassirer, E. Frances

    1995-06-01T23:59:59.000Z

    Wildlife distribution/abundance were studied at this location during 1993 and 1994 to establish the baseline as part of the wildlife mitigation agreement for construction of Dworshak reservoir. Inventory efforts were designed to (1) document distribution/abundance of 4 target species: pileated woodpecker, yellow warbler, black-capped chickadee, and river otter, (2) determine distribution/abundance of rare animals, and (3) determine presence and relative abundance of all other species except deer and elk. 201 wildlife species were observed during the survey period; most were residents or used the area seasonally for breeding or wintering. New distribution or breeding records were established for at least 6 species. Pileated woodpeckers were found at 35% of 134 survey points in upland forests; estimated densities were 0-0.08 birds/ha, averaging 0.02 birds/ha. Yellow warblers were found in riparian areas and shrubby draws below 3500 ft elev., and were most abundant in white alder plant communities (ave. est. densities 0.2-2. 1 birds/ha). Black-capped chickadees were found in riparian and mixed tall shrub vegetation at all elevations (ave. est. densities 0-0.7 birds/ha). River otters and suitable otter denning and foraging habitat were observed along the Snake and Salmon rivers. 15 special status animals (threatened, endangered, sensitive, state species of special concern) were observed at Craig Mt: 3 amphibians, 1 reptile, 8 birds, 3 mammals. Another 5 special status species potentially occur (not documented). Ecosystem-based wildlife management issues are identified. A monitoring plant is presented for assessing effects of mitigation activities.

  17. Evolution of sputtered tungsten coatings at high temperature

    SciTech Connect (OSTI)

    Stelmakh, Veronika; Rinnerbauer, Veronika; Joannopoulos, John D.; Solja?i?, Marin; Celanovic, Ivan; Senkevich, Jay J. [Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)] [Institute for Soldier Nanotechnologies, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States); Tucker, Charles; Ives, Thomas; Shrader, Ronney [Materion Corporation, Buellton, California 93427 (United States)] [Materion Corporation, Buellton, California 93427 (United States)

    2013-11-15T23:59:59.000Z

    Sputtered tungsten (W) coatings were investigated as potential high temperature nanophotonic material to replace bulk refractory metal substrates. Of particular interest are materials and coatings for thermophotovoltaic high-temperature energy conversion applications. For such applications, high reflectance of the substrate in the infrared wavelength range is critical in order to reduce losses due to waste heat. Therefore, the reflectance of the sputtered W coatings was characterized and compared at different temperatures. In addition, the microstructural evolution of sputtered W coatings (1 and 5 ?m thick) was investigated as a function of anneal temperature from room temperature to 1000 °C. Using in situ x-ray diffraction analysis, the microstrain in the two samples was quantified, ranging from 0.33% to 0.18% for the 1 ?m sample and 0.26% to 0.20% for the 5 ?m sample, decreasing as the temperature increased. The grain growth could not be as clearly quantified due to the dominating presence of microstrain in both samples but was in the order of 20 to 80 nm for the 1 ?m sample and 50 to 100 nm for the 5 ?m sample, as deposited. Finally, the 5 ?m thick layer was found to be rougher than the 1 ?m thick layer, with a lower reflectance at all wavelengths. However, after annealing the 5 ?m sample at 900 °C for 1 h, its reflectance exceeded that of the 1 ?m sample and approached that of bulk W found in literature. Overall, the results of this study suggest that thick coatings are a promising alternative to bulk substrates as a low cost, easily integrated platform for nanostructured devices for high-temperature applications, if the problem of delamination at high temperature can be overcome.

  18. Molecular dynamics simulation of erosion and surface evolution of tungsten due to bombardment with deuterium and carbon in

    E-Print Network [OSTI]

    Harilal, S. S.

    Simultaneous carbon and deuterium bombardment Hydrogen bubble formation Tungsten sputtering yield a b s t r a c. Carbon pre-irradiated tungsten tends to trap more hydrogen and facilitates gas bubble formation with deuterium and carbon in Tokamak fusion environments Xue Yang , Ahmed Hassanein Center for Material under

  19. Gas phase reaction products during tungsten atomic layer deposition using WF6 and Si2H6

    E-Print Network [OSTI]

    George, Steven M.

    Gas phase reaction products during tungsten atomic layer deposition using WF6 and Si2H6 R. K; published 23 July 2004 The gas phase reaction products during tungsten W atomic layer deposition ALD using WF6 and Si2H6 were studied using quadrupole mass spectrometry. The gas phase reactions products were

  20. Above: Power deposition in the superconducting magnets and the tungsten-carbide + water shield inside them, according to a

    E-Print Network [OSTI]

    McDonald, Kirk

    Above: Power deposition in the superconducting magnets and the tungsten-carbide + water shield FOR A MUON COLLIDER (TUP265, PAC11) The concept for a muon-production system for a muon collider (or neutrino Magnet shield WC beads + water Shield must dissipate 2.4 MW Superconducting magnets tungsten-carbide (WC

  1. Site characterization progress report: Yucca Mountain, Nevada, April 1, 1992--September 30, 1992, Number 7

    SciTech Connect (OSTI)

    NONE

    1992-12-01T23:59:59.000Z

    In accordance with section 113(b)(3) of the Nuclear Waste Policy Act of 1982, as amended (NWPA), the Department has prepared the seventh in a series of reports on the progress of site characterization at the Yucca Mountain candidate site. The Civilian Radioactive Waste Management Program made significant progress during the reporting period at the Yucca Mountain Site Characterization Project. Several important advances were made in the surface-based testing program including: initiation of borehole drilling utilizing the new, state-of-the-art LM-300 drill rig which employs dry drilling and coring techniques; neutron access borehole drilling to evaluate infiltration processes; excavations to aid geologic mapping; and trenching in Midway Valley to study Quaternary faulting. A Floodplain Assessment and Statement of Findings was published in the Federal Register which concluded there would be no significant impact nor cumulative impacts on floodplains resulting from Exploratory Studies Facility activities. The National Academy of Sciences` National Research Council released its report entitled ``Ground Water at Yucca Mountain: How High Can It Rise?`` which concluded that none of the evidence cited as proof of groundwater upwelling in and around Yucca Mountain could be reasonably attributed to that process and that significant water table excursions to the repository design level are not shown by the geologic record. The June 29, 1992, earthquake near Yucca Mountain provided scientists with a wealth of information relevant to understanding the neotectonics of the area and the geometry of faults at depth. Early findings suggest that accelerations recorded were well within proposed design limits for the surface waste handling facilities.

  2. Seismic interpretation of the Wind River Mountains

    E-Print Network [OSTI]

    Van Voorhis, David

    1982-01-01T23:59:59.000Z

    SEISMIC INTERPBETATICN OF THE BIND RIVER MOUNTAINS A Thesis DAVID VAN VOORHIS Submitted to the Graduate College of Texas ACM University in partial fulfillment of the requirement for the degree of MASTER OF SCIENCE Auqust 'l982 Majcr Subject...: Geophysics SEISNIC INTERFRETATION OF THE HIND RIVER NOUNTAINS A Thes is by DAVID VAN VOORBIS Approved as to style and content by: (Chairman cf. Committee) (N em ber } m (Head of Department) August l 982 ABSTRACT Seismic Interpretation of the Wind...

  3. Predicting the Future at Yucca Mountain

    SciTech Connect (OSTI)

    J. R. Wilson

    1999-07-01T23:59:59.000Z

    This paper summarizes a climate-prediction model funded by the DOE for the Yucca Mountain nuclear waste repository. Several articles in the open literature attest to the effects of the Global Ocean Conveyor upon paleoclimate, specifically entrance and exit from the ice age. The data shows that these millennial-scale effects are duplicated on the microscale of years to decades. This work also identifies how man may have influenced the Conveyor, affecting global cooling and warming for 2,000 years.

  4. Microstructure of laser-fired, sol-gel-derived tungsten oxide films

    SciTech Connect (OSTI)

    Taylor, D.J.; Birnie, D.P. III [Univ. of Arizona, Tucson, AZ (United States)] [Univ. of Arizona, Tucson, AZ (United States); Cronin, J.P. [Donnelly Corp., Tucson, AZ (United States)] [Donnelly Corp., Tucson, AZ (United States); Allard, L.F. Jr. [Oak Ridge National Lab, TN (United States)] [Oak Ridge National Lab, TN (United States)

    1996-07-01T23:59:59.000Z

    Half-micron-thick tungsten oxide films were deposited by the sol-gel method onto indium tin oxide (ITO) coated soda lime silicate substrates. Following a 100 {degrees}C prebake, the samples were fired with a carbon dioxide laser at a variety of power densities and translation speeds. The laser-fired tungsten oxide films were characterized by spectrophotometry, electrochemistry, multiangle ellipsometry, and transmission electron microscopy and compared to similar furnace-fired films. The data showed an increase in electrochromic response with increased firing temperature up to the point where crystallization of the tungsten oxide retarded electrochromic response. A window with graded electrochromic properties was made by laser firing. 35 refs., 8 figs., 1 tab.

  5. Micro-Raman and cathodoluminescence studies of epitaxial laterally overgrown GaN with tungsten masks: A method to map the free-carrier

    E-Print Network [OSTI]

    Nabben, Reinhard

    Micro-Raman and cathodoluminescence studies of epitaxial laterally overgrown GaN with tungsten properties of two epitaxial-laterally overgrown GaN structures with tungsten masks in 1100 and 1120 direction by tungsten masks3 to prevent the in-diffusion of silicon and oxygen atoms in the overgrown GaN, which

  6. A Tungsten(VI) Nitride Having a W2(-N)2 Core Zachary J. Tonzetich, Richard R. Schrock,* Keith M. Wampler, Brad C. Bailey,

    E-Print Network [OSTI]

    Müller, Peter

    A Tungsten(VI) Nitride Having a W2(µ-N)2 Core Zachary J. Tonzetich, Richard R. Schrock,* Keith M-331, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 Received September 27, 2007 The tungsten that the tungsten alkylidyne species W(C-t-Bu)(CH2-t-Bu)(OAr)2 (Ar ) 2,6-diisopropylphenyl) can be prepared readily

  7. Deuterium Depth Profile in Neutron-Irradiated Tungsten Exposed to Plasma

    SciTech Connect (OSTI)

    Masashi Shimada; G. Cao; Y. Hatano; T. Oda; Y. Oya; M. Hara; P. Calderoni

    2011-05-01T23:59:59.000Z

    The effect of radiation damage has been mainly simulated using high-energy ion bombardment. The ions, however, are limited in range to only a few microns into the surface. Hence, some uncertainty remains about the increase of trapping at radiation damage produced by 14 MeV fusion neutrons, which penetrate much farther into the bulk material. With the Japan-US joint research project: Tritium, Irradiations, and Thermofluids for America and Nippon (TITAN), the tungsten samples (99.99 % pure from A.L.M.T., 6mm in diameter, 0.2mm in thickness) were irradiated to high flux neutrons at 50 C and to 0.025 dpa in the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL). Subsequently, the neutron-irradiated tungsten samples were exposed to a high-flux deuterium plasma (ion flux: 1021-1022 m-2s-1, ion fluence: 1025-1026 m-2) in the Tritium Plasma Experiment (TPE) at the Idaho National Laboratory (INL). First results of deuterium retention in neutron-irradiated tungsten exposed in TPE have been reported previously. This paper presents the latest results in our on-going work of deuterium depth profiling in neutron-irradiated tungsten via nuclear reaction analysis. The experimental data is compared with the result from non neutron-irradiated tungsten, and is analyzed with the Tritium Migration Analysis Program (TMAP) to elucidate the hydrogen isotope behavior such as retention and depth distribution in neutron-irradiated and non neutron-irradiated tungsten.

  8. Effect of silver incorporation in phase formation and band gap tuning of tungsten oxide thin films

    SciTech Connect (OSTI)

    Jolly Bose, R.; Kumar, R. Vinod; Sudheer, S. K.; Mahadevan Pillai, V. P. [Department of Optoelectronics, University of Kerala, Kariyavattom, Thiruvananthapuram, Kerala 695581 (India); Reddy, V. R.; Ganesan, V. [UGC - DAE Consortium for Scientific Research, Khandwa Road, Indore 452017, Madhyapradesh (India)

    2012-12-01T23:59:59.000Z

    Silver incorporated tungsten oxide thin films are prepared by RF magnetron sputtering technique. The effect of silver incorporation in micro structure evolution, phase enhancement, band gap tuning and other optical properties are investigated using techniques such as x-ray diffraction, micro-Raman spectroscopy, atomic force microscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, and UV-Visible spectroscopy. Effect of silver addition in phase formation and band gap tuning of tungsten oxide thin films are investigated. It is found that the texturing and phase formation improves with enhancement in silver content. It is also found that as the silver incorporation enhances the thickness of the films increases at the same time the strain in the film decreases. Even without annealing the desired phase can be achieved by doping with silver. A broad band centered at the wavelength 437 nm is observed in the absorption spectra of tungsten oxide films of higher silver incorporation and this can be attributed to surface plasmon resonance of silver atoms present in the tungsten oxide matrix. The transmittance of the films is decreased with increase in silver content which can be due to increase in film thickness, enhancement of scattering, and absorption of light caused by the increase of grain size, surface roughness and porosity of films and enhanced absorption due to surface plasmon resonance of silver. It is found that silver can act as the seed for the growth of tungsten oxide grains and found that the grain size increases with silver content which in turn decreases the band gap of tungsten oxide from 3.14 eV to 2.70 eV.

  9. Comparison of Deuterium Retention for Ion-irradiated and Neutron-irradiated Tungsten

    SciTech Connect (OSTI)

    Yasuhisa Oya; Masashi Shimada; Makoto Kobayashi; Takuji Oda; Masanori Hara; Hideo Watanabe; Yuji Hatano; Pattrick Calderoni; Kenji Okuno

    2011-12-01T23:59:59.000Z

    The behavior of D retention for Fe{sup 2+}-irradiated tungsten with a damage of 0.025-3 dpa was compared with that for neutron-irradiated tungsten with 0.025 dpa. The D{sub 2} thermal desorption spectroscopy (TDS) spectra for Fe{sup 2+}-irradiated tungsten consisted of two desorption stages at 450 and 550 K, while that for neutron-irradiated tungsten was composed of three stages and an addition desorption stage was found at 750 K. The desorption rate of the major desorption stage at 550K increased as the displacement damage increased due to Fe{sup 2+} irradiation increasing. In addition, the first desorption stage at 450K was found only for damaged samples. Therefore, the second stage would be based on intrinsic defects or vacancy produced by Fe{sup 2+} irradiation, and the first stage should be the accumulation of D in mono-vacancy and the activation energy would be relatively reduced, where the dislocation loop and vacancy is produced. The third one was found only for neutron irradiation, showing the D trapping by a void or vacancy cluster, and the diffusion effect is also contributed to by the high full-width at half-maximum of the TDS spectrum. Therefore, it can be said that the D{sub 2} TDS spectra for Fe{sup 2+}-irradiated tungsten cannot represent that for the neutron-irradiated one, indicating that the deuterium trapping and desorption mechanism for neutron-irradiated tungsten is different from that for the ion-irradiated one.

  10. The impact of mining on the development of the eight Mountain States, 1860-1900

    E-Print Network [OSTI]

    Lang, Diane Coates

    1968-01-01T23:59:59.000Z

    California Sold, independent prospectors recalled rumors of great mineral wealth locked in the streams and Sulches of the Rocky Mountains and returned to sea. ch the Colorado or Pike's Peak area. Other prospectors reasoned t. hat since the gold they had.... s a hindrance in the extraction of gold and as a factor that reduced the market value of their ore, When the blue-colored material was identified as silver, the great 1860 rush from California to the Com- 4 stock area began. The miners 1'ound...

  11. Utilization of geothermal energy in the mining and processing of tungsten ore. Quarterly report

    SciTech Connect (OSTI)

    Lane, C.K.; Erickson, M.V.; Lowe, G.D.

    1980-02-01T23:59:59.000Z

    The status of the engineering and economic feasibility study of utilizing geothermal energy for the mining and processing of tungsten ore at the Union Carbide-Metals Division Pine Creek tungsten complex near Bishop, Calfironia is reviewed. Results of geophysical data analysis including determination of assumed resource parameters are presented. The energy utilization evaluation identifies potential locations for substituting geothermal energy for fossil fuel energy using current technology. Preliminary analyses for local environmental and institutional barriers to development of a geothermal system are also provided.

  12. Corrective Action Investigation Plan for Corrective Action Unit 99: Rainier Mesa/Shoshone Mountain, Nevada Test Site, Nevada with Errata and ROTC 1, Rev. No. 0

    SciTech Connect (OSTI)

    John McCord; Marutzky, Sam

    2004-12-01T23:59:59.000Z

    This Corrective Action Investigation Plan (CAIP) was developed for Corrective Action Unit (CAU) 99, Rainier Mesa/Shoshone Mountain. The CAIP is a requirement of the ''Federal Facility Agreement and Consent Order'' (FFACO) agreed to by the State of Nevada, the U.S. Department of Energy (DOE), and the U.S. Department of Defense (DoD) (FFACO, 1996). The FFACO addresses environmental restoration activities at U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO) facilities and sites including the underground testing area(s) of the Nevada Test Site (NTS). This CAIP describes the investigation activities currently planned for the Rainier Mesa/Shoshone Mountain CAU. These activities are consistent with the current Underground Test Area (UGTA) Project strategy described in Section 3.0 of Appendix VI, Revision No. 1 (December 7, 2000) of the FFACO (1996) and summarized in Section 2.1.2 of this plan. The Rainier Mesa/Shoshone Mountain CAU extends over several areas of the NTS (Figure 1-1) and includes former underground nuclear testing locations in Areas 12 and 16. The area referred to as ''Rainier Mesa'' includes the geographical area of Rainier Mesa proper and the contiguous Aqueduct Mesa. Figure 1-2 shows the locations of the tests (within tunnel complexes) conducted at Rainier Mesa. Shoshone Mountain is located approximately 20 kilometers (km) south of Rainier Mesa, but is included within the same CAU due to similarities in their geologic setting and in the nature and types of nuclear tests conducted. Figure 1-3 shows the locations of the tests conducted at Shoshone Mountain. The Rainier Mesa/Shoshone Mountain CAU falls within the larger-scale Rainier Mesa/Shoshone Mountain Investigation Area, which also includes the northwest section of the Yucca Flat CAU as shown in Figure 1-1. Rainier Mesa and Shoshone Mountain lie adjacent to the Timber Mountain Caldera Complex and are composed of volcanic rocks that erupted from the caldera as well as from more distant sources. This has resulted in a layered volcanic stratigraphy composed of thick deposits of welded and nonwelded ash-flow tuff and lava flows. These deposits are proximal to the source caldera and are interstratified with the more distal facies of fallout tephra and bedded reworked tuff from more distant sources. In each area, a similar volcanic sequence was deposited upon Paleozoic carbonate and siliciclastic rocks that are disrupted by various thrust faults, normal faults, and strike-slip faults. In both Rainier Mesa (km) to the southwest, and Tippipah Spring, 4 km to the north, and the tunnel complex is dry. Particle-tracking simulations performed during the value of information analysis (VOIA) (SNJV, 2004b) indicate that most of the regional groundwater that underlies the test locations at Rainier Mesa and Shoshone Mountain eventually follows similar and parallel paths and ultimately discharges in Death Valley and the Amargosa Desert. Particle-tracking simulations conducted for the regional groundwater flow and risk assessment indicated that contamination from Rainier Mesa and Shoshone Mountain were unlikely to leave the NTS during the 1,000-year period of interest (DOE/NV, 1997a). It is anticipated that CAU-scale modeling will modify these results somewhat, but it is not expected to radically alter the outcome of these previous particle-tracking simulations within the 1,000-year period of interest. The Rainier Mesa/Shoshone Mountain CAIP describes the corrective action investigation (CAI) to be conducted at the Rainier Mesa/Shoshone Mountain CAU to evaluate the extent of contamination in groundwater due to the underground nuclear testing. The CAI will be conducted by the UGTA Project, which is part of the NNSA/NSO Environmental Restoration Project (ERP). The purpose and scope of the CAI are presented in this section, followed by a summary of the entire document.

  13. Measurements of Nucleon-Induced Fission Cross-Sections of Separated Tungsten Isotopes and Natural Tungsten in the 50-200 MeV Energy Region

    E-Print Network [OSTI]

    V. P. Eismont; N. P. Filatov; A. N. Smirnov; S. M. Soloviev; J. Blomgren; H. Conde; A. V. Prokofiev; S. G. Mashnik

    2005-07-07T23:59:59.000Z

    Neutron- and proton-induced fission cross-sections of separated isotopes of tungsten (182W, 183W, 184W, and 186W) and natural tungsten relative to 209Bi have been measured in the incident nucleon energy region 50-200 MeV using fission chambers based on thin-film breakdown counters (TFBC) at quasi-monoenergetic neutrons from the 7Li(p,n) reaction and at the proton beams of The Svedberg Laboratory (TSL), Uppsala University (Uppsala, Sweden). The preliminary experimental data are presented in comparison with the recent data for nuclei in the lead-bismuth region, as well as with predictions by the CEM03.01 event generator.

  14. Rocky Mountain Power- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power provides incentives for residential customers in Idaho to install energy efficient equipment in participating homes. Rebates are available for qualified appliances,...

  15. Rocky Mountain Power- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power offers the Home Energy Savings Program for their residential Wyoming customers to improve the energy efficiency of their homes. Incentives are available for energy efficient...

  16. Rocky Mountain Power- Residential Energy Efficiency Rebate Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power provides incentives for residential customers to increase the energy efficiency of homes through the Home Energy Savings Program. Rebates are available through this program for...

  17. adirondack mountains: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Summary: culture and tradition. Within the territorial strategy, elaborate by the County these days, the balance the identity and the cultural diversity of the mountain...

  18. adrar mountains fishes: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    gravures de la rgion vont ensuite Paris-Sud XI, Universit de 2 Determinants of fish assemblage structure in Mount Itoupe mountain streams (French Guiana) Biology and...

  19. A Preliminary Structural Model for the Blue Mountain Geothermal...

    Open Energy Info (EERE)

    Preliminary Structural Model for the Blue Mountain Geothermal Field, Humboldt County, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: A...

  20. A Preliminary Conceptual Model for the Blue Mountain Geothermal...

    Open Energy Info (EERE)

    for the Blue Mountain Geothermal System, Humboldt County, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: A Preliminary Conceptual Model...

  1. Geology and Temperature Gradient Surveys Blue Mountain Geothermal...

    Open Energy Info (EERE)

    Gradient Surveys Blue Mountain Geothermal Discovery, Humboldt County, Nevada Jump to: navigation, search OpenEI Reference LibraryAdd to library Journal Article: Geology and...

  2. Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature...

    Open Energy Info (EERE)

    Ranch Pool & Spa Low Temperature Geothermal Facility Jump to: navigation, search Name Blue Mountain Hot Spring Guest Ranch Pool & Spa Low Temperature Geothermal Facility Facility...

  3. Figure 3-11 South Table Mountain Utilities Map

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Existing Buildings Electrical Figure 3-11 South Table Mountain Utilities Map Sewer Communication Water Surface Drainage Storm Water WATER TANK FACILITIES QUAKER STREET OLD QUA RRY...

  4. arbuckle mountains oklahoma: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    the requirements for the degree... of MASTER OF SCIENCE December 1989 Major Subject: Geology GEOMORPHIC EVIDENCE FOR LATE CENOZOIC DEFORMATION' WICHITA MOUNTAINS, OKLAHOMA A...

  5. ROCKY MOUNTAIN OILFIELD TESTING CENTER PROJECT TEST RESULTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MOUNTAIN OILFIELD TESTING CENTER MAG-WELL DOWNHOLE MAGNETIC FLUID CONDITIONERS PROJECT TEST RESULTES Prepared for: Industry Publication Prepared by: MICHAEL R. TYLER RMOTC Field...

  6. ROCKY MOUNTAIN OILFIELD TESTING CENTER PROJECT TEST RESULTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    JANUARY 27, 1998 Report No. RMOTC97PT22 ROCKY MOUNTAIN OILFIELD TESTING CENTER PROJECT TEST RESULTS PETRO-PLUG BENTONITE PLUGGING Prepared for: INDUSTRY PUBLICATION Prepared by:...

  7. ROCKY MOUNTAIN OILFIELD TESTING CENTER PROJECT TEST RESULTS

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FEBRUARY 19, 1997 FC9532 95EC1 ROCKY MOUNTAIN OILFIELD TESTING CENTER AJUST A PUMP TEST Rosemond Manufacturing, Inc. (RMI) Prepared for: INDUSTRY PUBLICATION Prepared by:...

  8. List of Yucca Mountain Archival Documents | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    Supplement to the Environmental Impact Statement Geologic Repository for the Disposal of Spent Nuclear Fuel and High-level Radioactive Waste at Yucca Mountain, Nye County, Nevada...

  9. Department of Energy Files Motion to Withdraw Yucca Mountain...

    Energy Savers [EERE]

    Stephanie Mueller about Yucca Mountain U.S. Department of Energy Awards a Contract to USA Repository Services for Management and Operating Contractor Support for the Yucca...

  10. Rocky Mountain Power- WattSmart Residential Efficiency Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power provides incentives for residential customers in Idaho to install energy efficient equipment in participating homes. Rebates are available for qualified appliances,...

  11. Rocky Mountain Power- WattSmart Residential Efficiency Program

    Broader source: Energy.gov [DOE]

    Rocky Mountain Power offers the Home Energy Savings Program for their residential Wyoming customers to improve the energy efficiency of their homes. Incentives are available for energy efficient...

  12. Preliminary Notice of Violation, Rocky Mountain Remediation Services...

    Broader source: Energy.gov (indexed) [DOE]

    June 6, 1997 Issued to Rocky Mountain Remediation Services related to a Radioactive Material Release during Trench Remediation at the Rocky Flats Environmental Technology Site,...

  13. Groundwater in the Southwestern Part of the Jemez Mountains Volcanic...

    Open Energy Info (EERE)

    Jump to: navigation, search OpenEI Reference LibraryAdd to library Conference Paper: Groundwater in the Southwestern Part of the Jemez Mountains Volcanic Region, New Mexico...

  14. aep mountaineer plant: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Page Topic Index 1 Predicting future distributions of mountain plants under climate change: does dispersal capacity matter? Environmental Sciences and Ecology Websites Summary:...

  15. Theoretic Insight into CO2 Reduction at Active Sites of Molybdenum and Tungsten Enzymes: a {\\pi} Interaction between CO2 and Tungsten Bis-Dithiolene Complexes

    E-Print Network [OSTI]

    Yan, Yong

    2014-01-01T23:59:59.000Z

    Active sites of molybdenum and tungsten enzymes, particularly mononuclear tungsten formate dehydrogenase (FDH) have been theoretically investigated towards their interaction with CO2. Obvious {\\pi} interaction has been found between the 2e reduced metallodithiole moiety and the molecular CO2. This weak {\\pi} bonding is predicated both at gas phase, noted as -6.0 kcal/mol and aqueous solvation level, -3.6 kcal/mol. Such interaction is not only limited to CO2, but also to the CO2 reduced product, i.e. formate, in the form of anion- {\\pi} interaction, noted as -6.8 kcal/mol and -4.1 kcal/mol respectively in gas and aqueous solvation model. The Bailar twisted angles from 60o to 0o, governing structure preference of tungsten dithiolene from octahedron to triangle prism in their restricted structures, has been explored to evaluate such {\\pi} in-terrelations with CO2 and formate. An octahedral structure with 3 kcal/mol energy lower is preferred over the triangle prismatic when such interactions are concerned.

  16. Tell President Obama About Coal River Mountain Coal River Mountain and the Heathrow Airport runway remind me how important it is to

    E-Print Network [OSTI]

    Hansen, James E.

    Tell President Obama About Coal River Mountain Coal River Mountain and the Heathrow Airport runway remind me how important it is to keep our eye on the ball. Coal River Mountain is the site of an absurdity. I learned about Coal River Mountain from students at Virginia Tech last fall. They were concerned

  17. The appropriateness of one-dimensional Yucca Mountain hydrologic calculations; Yucca Mountain Site Characterization Project

    SciTech Connect (OSTI)

    Eaton, R.R.

    1993-07-01T23:59:59.000Z

    This report brings into focus the results of numerous studies that have addressed issues associated with the validity of assumptions which are used to justify reducing the dimensionality of numerical calculations of water flow through Yucca Mountain, NV. it is shown that, in many cases, one-dimensional modeling is more rigorous than previously assumed.

  18. RED MOUNTAIN BAR PUMPED STOR AGE PR OJEC T Red Mountain Bar Pumped Storage Project

    E-Print Network [OSTI]

    Laughlin, Robert B.

    a pumped storage project to generate electricity during peak demand. The proposed Red Mountain Bar Pumped from a lower reservoir to an upper reservoir when demand and price for electricity is low. Water the next day. These projects are uniquely suited for generating power when demand for electricity is high

  19. Transient Thermal and Stress Response of A Helium-Cooled Tungsten Plate-Type Divertor

    E-Print Network [OSTI]

    Raffray, A. René

    Transient Thermal and Stress Response of A Helium- Cooled Tungsten Plate-Type Divertor X.R. Wang, A and shutdown operations have been analyzed with a coupled transient thermo-fluid and thermal-stress approach and investigated for power plant applications with a goal of accommodating a heat flux of 10 MW/m2 . The concepts

  20. Tungsten uptake kinetics and trophic1 transfer into a novel gastropod model2

    E-Print Network [OSTI]

    Ma, Lena

    exploration of its relevant environmental and biological pathways. This investigation presents the most7 some27 siderophilic tendencies that are very similar to uranium and thorium, and which have similar it a unique29 element. Tungsten has one of the greatest densities (19.25 g/cm3 ), after only uranium

  1. Submersion Criticality Safety Analysis of Tungsten-Based Fuel for Nuclear Power and Propulsion Applications

    SciTech Connect (OSTI)

    A.E. Craft; R. C. O'Brien; S. D. Howe; J. C. King

    2014-07-01T23:59:59.000Z

    The Center for Space Nuclear Research (CSNR) is developing tungsten-encapsulated fuels for space nuclear applications. Aims to develop NTP fuels that are; Affordable Low impact on production and testing environment Producible on a large scale over suitable time period Higher-performance compared to previous graphite NTP fuel elements Space nuclear reactors remain subcritical before and during launch, and do not go critical until required by its mission. A properly designed reactor will remain subcritical in any launch abort scenario, where the reactor falls back to Earth and becomes submerged in terrestrial material. Submersion increases neutron reflection and thermalizes the neutrons, which typically increases the reactivity of the core. This effect is usually very significant for fast-spectrum reactors. This research provided a submersion criticality safety analysis for a representative tungsten/uranium oxide fueled reactor. Determine the submersion behavior of a reactor fueled by tungsten-based fuel. Considered fuel compositions with varying: Rhenium content (wt% rhenium in tungsten) Fuel loading fractions (UO2 vol%)

  2. Micro-engineered first wall tungsten armor for high average power laser fusion energy systems

    E-Print Network [OSTI]

    Ghoniem, Nasr M.

    Micro-engineered first wall tungsten armor for high average power laser fusion energy systems is developing an inertial fusion energy demonstration power reactor with a solid first wall chamber. The first is a coordinated effort to develop laser inertial fusion energy [1]. The first stage of the HAPL program

  3. ULTRA LOW PRESSURE-DROP HELIUM-COOLED POROUS-TUNGSTEN PFC S. Sharafat1

    E-Print Network [OSTI]

    Ghoniem, Nasr M.

    ULTRA LOW PRESSURE-DROP HELIUM-COOLED POROUS-TUNGSTEN PFC S. Sharafat1 , A. Mills1 , D. Youchison2/s. Based on these impressive performance results, a unique and scalable heat exchanger channel with ultra-low and ultra low-pressure drop short flow-path (SOFIT) concept was designed. Typical pressure drops through

  4. Laminated electrochromic windows based on nickel oxide, tungsten oxide, and gel electrolytes

    SciTech Connect (OSTI)

    Passerini, S.; Scrosati, B.; Hermann, V. (Univ. di Roma (Italy). Dipt. di Chimica); Holmblad, C.; Bartlett, T. (Medtronic Promeon, Minneapolis, MN (United States))

    1994-04-01T23:59:59.000Z

    The characteristic and the performance of solid-state, laminated electrochromic windows using tungsten oxide as the principal electrochromic electrode and nonstoichiometric nickel oxide as the counterelectrode separated by selected gel electrolytes, are presented and discussed. These advanced-design, electro-optical devices show a very promising behavior in terms of light modulation and cyclability.

  5. Helium Jet-Cooled Tungsten Divertor Concept J.S. O'Della

    E-Print Network [OSTI]

    Raffray, A. René

    Helium Jet-Cooled Tungsten Divertor Concept J.S. O'Della and A.R. Raffrayb a Plasma Processes, Inc., Huntsville, Alabama, USA b University of California ­ San Diego, La Jolla, California, USA Abstract-- Helium helium cooling techniques for high heat flux (HHF) applications. However, because of the small size

  6. The role of helium implantation induced vacancy defect on hardening of tungsten

    SciTech Connect (OSTI)

    Ou, Xin, E-mail: x.ou@hzdr.de [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); State Key Laboratory of Functional Material for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, Shanghai 200250 (China); Anwand, Wolfgang, E-mail: w.anwand@hzdr.de; Kögler, Reinhard, E-mail: r.koegler@hzdr.de [Helmholtz-Zentrum Dresden-Rossendorf, Bautzner Landstr. 400, 01328 Dresden (Germany); Zhou, Hong-Bo [Department of Physics, Beihang University, Beijing 100191 (China); Richter, Asta, E-mail: asta.richter@th-wildau.de [Technische Hochschule Wildau, Hochschulring1, 15745 Wildau (Germany)

    2014-03-28T23:59:59.000Z

    Vacancy-type defects created by helium implantation in tungsten and their impact on the nano-hardness characteristics were investigated by correlating the results from the positron annihilation spectroscopy and the nano-indentation technique. Helium implantation was performed at room temperature (RT) and at an elevated temperate of 600?°C. Also, the effect of post-annealing of the RT implanted sample was studied. The S parameter characterizing the open volume in the material was found to increase after helium irradiation and is significantly enhanced for the samples thermally treated at 600?°C either by irradiation at high temperature or by post-annealing. Two types of helium-vacancy defects were detected after helium irradiation; small defects with high helium-to-vacancy ratio (low S parameter) for RT irradiation and large defects with low helium-to-vacancy ratio (high S parameter) for thermally treated tungsten. The hardness of the heat treated tungsten coincides with the S parameter, and hence is controlled by the large helium-vacancy defects. The hardness of tungsten irradiated at RT without thermal treatment is dominated by manufacturing related defects such as dislocation loops and impurity clusters and additionally by trapped He atoms from irradiation effects, which enhance hardness. He-stabilized dislocation loops mainly cause the very high hardness values in RT irradiated samples without post-annealing.

  7. Interactions of mobile helium clusters with surfaces and grain boundaries of plasma-exposed tungsten

    SciTech Connect (OSTI)

    Hu, Lin; Maroudas, Dimitrios, E-mail: maroudas@ecs.umass.edu [Department of Chemical Engineering, University of Massachusetts, Amherst, Massachusetts 01003-9303 (United States); Hammond, Karl D.; Wirth, Brian D. [Department of Nuclear Engineering, University of Tennessee, Knoxville, Tennessee 37996 (United States)

    2014-05-07T23:59:59.000Z

    We report results of atomistic computations for the interactions of small mobile helium clusters (He{sub n}) with free surfaces and grain boundaries (GBs) in tungsten toward development of continuum drift-diffusion-reaction models for the dynamics of mobile helium clusters in plasma-exposed tungsten. Molecular-statics (MS) simulations based on reliable many-body interatomic potentials are carried out for He{sub n} (1???n???7) clusters near sinks to obtain the potential energy profiles of the He{sub n} clusters as a function of the clusters' center-of-mass distance from a sink. Sinks investigated include surfaces, GBs, and regions in the vicinity of junctions where GBs intersect free surfaces. Elastic interaction potentials based on elastic inclusion theory provide an excellent description of the MS results for the cluster-sink interactions. The key parameter in the elastic models is the sink segregation strength, which is found to increase with increasing cluster size. Such cluster-sink interactions are responsible for the migration of small helium clusters by drift and for helium segregation on surfaces and grain boundaries in tungsten. Such helium segregation on sinks is observed in large-scale molecular-dynamics simulations of helium aggregation in model polycrystalline tungsten at 933?K upon helium implantation.

  8. Materials Corrosion and Mitigation Strategies for APT: Using Solution Resistivity as an Estimate of Tungsten Corrosion

    E-Print Network [OSTI]

    Materials Corrosion and Mitigation Strategies for APT: Using Solution Resistivity as an Estimate of Tungsten Corrosion in Spallation Neutron Target Cooling Loops R. Scott Lillard, Darryl P. Butt Materials Corrosion and Environmental Effects Laboratory MST-6, Metallurgy Los Alamos National Laboratory Los Alamos

  9. Tungsten nano-tendril growth in the Alcator C-Mod divertor

    E-Print Network [OSTI]

    Baldwin, M.J.

    Growth of tungsten nano-tendrils ('fuzz') has been observed for the first time in the divertor region of a high-power density tokamak experiment. After 14 consecutive helium L-mode discharges in Alcator C-Mod, the tip of ...

  10. Utilization of geothermal energy in the mining and processing of tungsten ore. Final report

    SciTech Connect (OSTI)

    Erickson, M.V.; Lacy, S.B.; Lowe, G.D.; Nussbaum, A.M.; Walter, K.M.; Willens, C.A.

    1981-01-01T23:59:59.000Z

    The engineering, economic, and environmental feasibility of the use of low and moderate temperature geothermal heat in the mining and processing of tungsten ore is explored. The following are covered: general engineering evaluation, design of a geothermal energy system, economics, the geothermal resource, the institutional barriers assessment, environmental factors, an alternate geothermal energy source, and alternates to geothermal development. (MHR)

  11. Defect production in tungsten: A comparison between field-ion microscopy and molecular-dynamics simulations

    E-Print Network [OSTI]

    Nordlund, Kai

    Defect production in tungsten: A comparison between field-ion microscopy and molecular defect production efficiencies obtained by FIM are a consequence of a surface effect, which greatly enhances defect production compared to that in the crystal interior. Comparison of clustering of vacancies

  12. MODELING SPACE-TIME DEPENDENT HELIUM BUBBLE EVOLUTION IN TUNGSTEN ARMOR UNDER IFE CONDITIONS

    E-Print Network [OSTI]

    Ghoniem, Nasr M.

    MODELING SPACE-TIME DEPENDENT HELIUM BUBBLE EVOLUTION IN TUNGSTEN ARMOR UNDER IFE CONDITIONS Qiyang dependent Helium transport in finite geometries, including the simultaneous transient production of defects of Helium bubbles. I. INTRODUCTION Helium production and helium bubble evolution in neutron

  13. SPS Fabrication of Tungsten-Rhenium Alloys in Support of NTR Fuels Development

    SciTech Connect (OSTI)

    Jonathan A. Webb; Indrajit Charit; Cory Sparks; Darryl P. Butt; Megan Frary; Mark Carroll

    2011-02-01T23:59:59.000Z

    Abstract. Tungsten metal slugs were fabricated via Spark Plasma Sintering (SPS) of powdered metals at temperatures ranging from 1575 K to 1975 K and hold times of 5 minutes to 30 minutes, using powders with an average diameter of 7.8 ?m. Sintered tungsten specimens were found to have relative densities ranging from 83 % to 94 % of the theoretical density for tungsten. Consolidated specimens were also tested for their Vickers Hardness Number (VHN), which was fitted as a function of relative density; the fully consolidated VHN was extrapolated to be 381.45 kg/mm2. Concurrently, tungsten and rhenium powders with average respective diameters of 0.5 ?m and 13.3 ?m were pre-processed either by High-Energy-Ball-Milling (HEBM) or by homogeneous mixing to yield W-25at.%Re mixtures. The powder batches were sintered at temperatures of 1975 K and 2175 K for hold times ranging from 0 minutes to 60 minutes yielding relative densities ranging from 94% to 97%. The combination of HEBM and sintering showed a significant decrease in the inter-metallic phases compared to that of the homogenous mixing and sintering.

  14. Rocky Mountain Institute | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump to: navigation, searchRochesterRocky Mountain

  15. Sand Mountain Electric Coop | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty Edit with form HistoryRistma AG Jump to:EnergysourceRamon, California:Sand Mountain

  16. Mountain Home Wind Farm | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)Mountain Air Jump to:Home Wind

  17. Mountain View Grand | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)Mountain Air Jump

  18. Mountain View IV | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)Mountain Air JumpIV Jump to:

  19. Mountaineer Wind Energy Center | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are beingZealand Jump to: navigation, searchOfRose BendMiasole IncMinutemanVistaZephyr)Mountain Air JumpIV JumpI

  20. Mountain Electric Coop, Inc | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu anMicrogreenMoon LakeMountain Electric Coop, Inc Jump to:

  1. Mountain Energy Corporation | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnual SiteofEvaluatingGroup |JilinLu anMicrogreenMoon LakeMountain Electric Coop, Inc Jump

  2. Bald Mountain Geothermal Project | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia: EnergyAvignon, France: EnergyBagley Public UtilitiesBald Mountain

  3. Cemex Black Mountain Quarry | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov You are being directedAnnualProperty EditCalifornia:Power LPInformationCashtonGoCaterpillar JumpCedroBlack Mountain

  4. Rocky Mountain Power | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page onYou are now leaving Energy.gov You are now leaving Energy.gov YouKizildere IRaghuraji Agro Industries Pvt Ltd Jump to: navigation,MazeOhio:Ohio:Rockwall County, Texas:Rocky Mountain

  5. Defect annealing and thermal desorption of deuterium in low dose HFIR neutron-irradiated tungsten

    SciTech Connect (OSTI)

    Masashi Shimada; M. Hara; T. Otsuka; Y. Oya; Y. Hatano

    2014-05-01T23:59:59.000Z

    Accurately estimating tritium retention in plasma facing components (PFCs) and minimizing its uncertainty are key safety issues for licensing future fusion power reactors. D-T fusion reactions produce 14.1 MeV neutrons that activate PFCs and create radiation defects throughout the bulk of the material of these components. Recent studies show that tritium migrates and is trapped in bulk (>> 10 µm) tungsten beyond the detection range of nuclear reaction analysis technique [1-2], and thermal desorption spectroscopy (TDS) technique becomes the only established diagnostic that can reveal hydrogen isotope behavior in in bulk (>> 10 µm) tungsten. Radiation damage and its recovery mechanisms in neutron-irradiated tungsten are still poorly understood, and neutron-irradiation data of tungsten is very limited. In this paper, systematic investigations with repeated plasma exposures and thermal desorption are performed to study defect annealing and thermal desorption of deuterium in low dose neutron-irradiated tungsten. Three tungsten samples (99.99 at. % purity from A.L.M.T. Co., Japan) irradiated at High Flux Isotope Reactor at Oak Ridge National Laboratory were exposed to high flux (ion flux of (0.5-1.0)x1022 m-2s-1 and ion fluence of 1x1026 m-2) deuterium plasma at three different temperatures (100, 200, and 500 °C) in Tritium Plasma Experiment at Idaho National Laboratory. Subsequently, thermal desorption spectroscopy (TDS) was performed with a ramp rate of 10 °C/min up to 900 °C, and the samples were annealed at 900 °C for 0.5 hour. These procedures were repeated three (for 100 and 200 °C samples) and four (for 500 °C sample) times to uncover damage recovery mechanisms and its effects on deuterium behavior. The results show that deuterium retention decreases approximately 90, 75, and 66 % for 100, 200, and 500 °C, respectively after each annealing. When subjected to the same TDS recipe, the desorption temperature shifts from 800 °C to 600 °C after 1st annealing for the sample exposed to TPE at 500 °C. Tritium Migration Analysis Program (TMAP) analysis reveals that the detrapping energy decreases from 1.8 eV to 1.4 eV, indicating the changes in trapping mechanisms. This paper also summarizes deuterium behavior studies in HFIR neutron-irradiated tungsten under US-Japan TITAN program.

  6. Influence of process parameters on properties of reactively sputtered tungsten nitride thin films

    SciTech Connect (OSTI)

    Addonizio, Maria L.; Castaldo, Anna; Antonaia, Alessandro; Gambale, Emilia; Iemmo, Laura [ENEA, Portici Research Centre, Piazzale E. Fermi 1, I-80055, Portici (Italy)

    2012-05-15T23:59:59.000Z

    Tungsten nitride (WN{sub x}) thin films were produced by reactive dc magnetron sputtering of tungsten in an Ar-N{sub 2} gas mixture. The influence of the deposition power on the properties of tungsten nitride has been analyzed and compared with that induced by nitrogen content variation in the sputtering gas. A combined analysis of structural, electrical and optical properties on thin WN{sub x} films obtained at different deposition conditions has been performed. It was found that at an N{sub 2} content of 14% a single phase structure of W{sub 2}N films was formed with the highest crystalline content. This sputtering gas composition was subsequently used for fabricating films at different deposition powers. Optical analysis showed that increasing the deposition power created tungsten nitride films with a more metallic character, which is confirmed with resistivity measurements. At low sputtering powers the resulting films were crystalline whereas, with an increase of power, an amorphous phase was also present. The incorporation of an excess of nitrogen atoms resulted in an expansion of the W{sub 2}N lattice and this effect was more pronounced at low deposition powers. Infrared analysis revealed that in WN{sub x} films deposited at low power, chemisorbed N{sub 2} molecules did not behave as ligands whereas at high deposition power they clearly appeared as ligands around metallic tungsten. In this study, the influence of the most meaningful deposition parameters on the phase transformation reaction path was established and deposition conditions suitable for producing thermally stable and highly crystalline W{sub 2}N films were found.

  7. Livelihood Assets Atlas Mountainous Districts of NWFP (Pakistan)

    E-Print Network [OSTI]

    Richner, Heinz

    Livelihood Assets Atlas Mountainous Districts of NWFP (Pakistan) April 2009 SDPISustainable Mountainous Districts of NWFP (Pakistan) Abid Qaiyum Suleri, Babar Shahbaz, Sahab Haq Rana Nazir Mehmood and Gulbaz Ali Khan Sustainable Development Policy Institute 20 Hill Road, F-6/3, Islamabad - Pakistan www

  8. Updated Multichannel Infrared Solar Spectrograph at Purple Mountain Observatory #

    E-Print Network [OSTI]

    Li, Hui

    in solar flare [12] , which is # Supported by the National Natural Science Foundation of China (NSFC, NoUpdated Multichannel Infrared Solar Spectrograph at Purple Mountain Observatory # LI Hui(Ā©Āæ), YOU Jianqi(Ę?OÅ ), WU Qindi(Ć?,l) and YU Xingfeng(ā?¢lb) Purple Mountain Observatory, CAS, Nanjing 210008, China

  9. Updated Multichannel Infrared Solar Spectrograph at Purple Mountain Observatory

    E-Print Network [OSTI]

    Li, Hui

    Updated Multichannel Infrared Solar Spectrograph at Purple Mountain Observatory LI Hui( Ć»), YOU Jianqi( Ć? ), WU Qindi( ĀøƐ) and YU Xingfeng(ƄƐ ) Purple Mountain Observatory, CAS, Nanjing 210008, China National Astronomical Observatories, CAS, Beijing 100012, China Email: lihui@mail.pmo.ac.cn Tel: 025

  10. Soil macroaggregate dynamics in a mountain spatial climate gradient

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Soil macroaggregate dynamics in a mountain spatial climate gradient Lauric Cécillon1,2,* , Nilvania://lauric.cecillon.free.fr/ Key words: Mountain soils; Climate change; Soil aggregation; Soil organic matter; Near infrared reflectance spectroscopy; Soil threats Biogeochemistry 97: 31-43 (2010) http://dx.doi.org/10.1007/s10533

  11. Lifestyle, identity and young people's experiences of mountain biking

    E-Print Network [OSTI]

    Lifestyle, identity and young people's experiences of mountain biking It has been widely recognised emphasis on young people as a key target group. Mountain biking, as a popular youth sport that often occurs biking and to investigate the resulting relation- ships young people developed with countryside spaces

  12. Evaporation-assisted high-power impulse magnetron sputtering: The deposition of tungsten oxide as a case study

    SciTech Connect (OSTI)

    Hemberg, Axel; Dauchot, Jean-Pierre; Snyders, Rony; Konstantinidis, Stephanos [Materia Nova Research Center-Parc Initialis, 1, Avenue Copernic, B-7000 Mons, Belgium and Chimie des Interactions Plasma-Surface, CIRMAP, Universite de Mons-20, Place du Parc, B-7000 Mons (Belgium); Chimie des Interactions Plasma-Surface, CIRMAP, Universite de Mons-20, Place du Parc, B-7000 Mons (Belgium); Materia Nova Research Center-Parc Initialis, 1, Avenue Copernic, B-7000 Mons (Belgium) and Chimie des Interactions Plasma-Surface, CIRMAP, Universite de Mons-20, Place du Parc, B-7000 Mons (Belgium); Chimie des Interactions Plasma-Surface, CIRMAP, Universite de Mons-20, Place du Parc, B-7000 Mons (Belgium)

    2012-07-15T23:59:59.000Z

    The deposition rate during the synthesis of tungsten trioxide thin films by reactive high-power impulse magnetron sputtering (HiPIMS) of a tungsten target increases, above the dc threshold, as a result of the appropriate combination of the target voltage, the pulse duration, and the amount of oxygen in the reactive atmosphere. This behavior is likely to be caused by the evaporation of the low melting point tungsten trioxide layer covering the metallic target in such working conditions. The HiPIMS process is therefore assisted by thermal evaporation of the target material.

  13. Exploring for hydrocarbons in geothermally and hydrothermally complex areas -- a southern Nevada example

    SciTech Connect (OSTI)

    Harris, A.G.; Repetski, J.E. [Geological Survey, Reston, VA (United States); Grow, J.A. [Geological Survey, Denver, CO (United States)

    1995-06-01T23:59:59.000Z

    Time-based isograd maps using conodont color alteration indices (CAI) have been compiled and interpreted for a large area in southern Nevada that includes Yucca Mountain, the Nevada Test Site, and the Nellis Air Force Bombing and Gunnery Range. These maps were produced to evaluate the controversy about possible important mineral and (or) energy resources near Yucca Mountain, the potential burial site for high-level nuclear waste. The hydrocarbon potential of the Yucca Mountain area has been likened to that of the Railroad and Pine Valley areas, 200 km to the northeast where 35 million barrels of oil have been produced from Paleozoic and lower Tertiary strata. In 1991, two companies with no previous drilling experience in Nevada drilled three oil exploration wells within 20 km of Yucca Mountain and within or close to the Timber Mountain caldera system. No shows of oil or gas were found in these wells. The deepest well was drilled to 5,000 feet and penetrated 2,200 feet of upper Tertiary valley-fill deposits and volcanic rocks overlying an overturned sequence of Upper Cambrian and Lower Ordovician rocks having conodonts with CAI values of 5. Our new conodont sampling, however, has targeted some thermally favorable areas for hydrocarbons east of Yucca mountain, but their maturation history suggests that the potential for oil is substantially lower than in the Railroad and Pine Valley areas. Cambrian through Triassic rocks in the vicinity of Yucca Mountain have experienced temperatures too high for oil to be preserved, except for a narrow zone (20 x 100 km) northeast of Yucca Mountain, where Mississippian through Triassic rocks are just within the upper limit of the oil generating window. Most of this zone, however, lies on Federal lands that are, for now, inaccessible for a variety of security and environmental reasons.

  14. Yucca Mountain drift scale test progress report

    SciTech Connect (OSTI)

    Apps, J.; Birkholzer, J.T.; Peterson,J.E.; Sonnenthal, E.; Spycher, N.; Tsang, Y.W.; Williams, K.H.

    1999-01-01T23:59:59.000Z

    The Drift Scale Test (DST) is part of the Exploratory Studies Facility (ESF) Thermal Test being conducted underground at the potential high-level nuclear waste repository at Yucca Mountain, Nevada. The purpose of the ESF Thermal Test is to acquire a more in-depth understanding of the coupled thermal, mechanical, hydrological, and chemical processes likely to be encountered in the rock mass surrounding the potential geological repository at Yucca Mountain. These processes are monitored by a multitude of sensors to measure the temperature, humidity, gas pressure, and mechanical displacement, of the rock formation in response to the heat generated by the heaters. In addition to collecting passive monitoring data, active hydrological and geophysical testing is also being carried out periodically in the DST. These active tests are intended to monitor changes in the moisture redistribution in the rock mass, to collect water and gas samples for chemical and isotopic analysis, and to detect microfiacturing due to heating. On December 3, 1998, the heaters in the DST were activated. The planned heating phase of the DST is 4 years, and the cooling phase following the power shutoff will be of similar duration. The present report summarizes interpretation and analysis of thermal, hydrological, chemical, and geophysical data for the first 6 months; it is the first of many progress reports to be prepared during the DST.

  15. Blue Mountain, Humboldt County, Nevada, U.S.A

    SciTech Connect (OSTI)

    Ted Fitzpatrick, Brian D. Fairbank

    2005-04-01T23:59:59.000Z

    The report documents the drilling of well Deep Blue No.2, the second deep geothermal test hole at the Blue Mountain Geothermal Area, Humboldt County, Nevada. The well was drilled by Noramex Corp, a Nevada company, with funding support from the US Department of Energy, under the DOE’s GRED II Program. Deep Blue No.2 was drilled as a ‘step-out’ hole from Deep Blue No.1, to further evaluate the commercial potential of the geothermal resource. Deep Blue No.2 was designed as a vertical, slim observation test hole to a nominal target depth of 1000 meters (nominal 3400 feet). The well tests an area of projected high temperatures at depth, from temperature gradients measured in a group of shallow drill holes located approximately one kilometer to the northeast of observation hole Deep Blue No.1. The well is not intended for, or designed as, a commercial well or a production well. Deep Blue No.2 was spudded on March 25, 2004 and completed to a total depth of 1127.76m (3700 ft) on April 28, 2004. The well was drilled using conventional rotary drilling techniques to a depth of 201.17 m (660 ft), and continuously cored from 201.17m (660 ft) to 1127.76m (3700 ft). A brief rig-on flow-test was conducted at completion to determine basic reservoir parameters and obtain fluid samples. A permeable fracture zone with measured temperatures of 150 to 167°C (302 to 333°F) occurs between 500 to 750m (1640 to 2461ft). The well was left un-lined in anticipation of the Phase III - Flow and Injection Testing. A further Kuster temperature survey was attempted after the well had been shut in for almost 3 weeks. The well appears to have bridged off at 439m (1440ft) as the Kuster tool was unable to descend past this point. Several attempts to dislodge the obstruction using tube jars were unsuccessful. Deep Blue No.2 encountered variably fractured and veined, fine-grained rocks of the Singas Formation, and intruded by minor strongly altered fine-grained felsic dikes, and less altered fineto medium-grained felsic to intermediate dikes. Widespread open fractures and extensive of quartz veining in many intervals of the core indicate a high degree of fracturing and flow of silica-bearing fluids, almost certainly hotter than 200°C (392°F), at some time, but these fractures are now partially sealed. Intervals of soft shaly mudstone, common clay gouge, and rocks with generally low permeability (few veins and fractures) may also form a seal or ‘cap’ above the main high temperature reservoir at Blue Mountain. The encouraging results from Deep Blue No.2 support further drilling at Blue Mountain. Higher temperature fluids can be expected where fractures providing channels for the circulation of hot water from depth have not been sealed extensively by silica deposition.

  16. Abnormal distribution of microhardness in tungsten inert gas arc butt-welded AZ61 magnesium alloy plates

    SciTech Connect (OSTI)

    Xu Nan [College of Material Science and Engineering, Chongqing University, Chongqing 400044 (China); Shen Jun, E-mail: shenjun2626@163.com [College of Material Science and Engineering, Chongqing University, Chongqing 400044 (China); Xie Weidong; Wang Linzhi; Wang Dan; Min Dong [College of Material Science and Engineering, Chongqing University, Chongqing 400044 (China)

    2010-07-15T23:59:59.000Z

    In this study, the effects of heat input on the distribution of microhardness of tungsten inert gas (TIG) arc welded hot-extruded AZ61 magnesium alloy joints were investigated. The results show that with an increase of heat input, the distributions of microhardness at the top and bottom of the welded joints are different because they are determined by both the effect of grain coarsening and the effect of dispersion strengthening. With an increase of the heat input, the microhardness of the heat-affected zone (HAZ) at the top and bottom of welded joints and the fusion zone (FZ) at the bottom of welded joints decreased gradually, while the microhardness of the FZ at the top of welded joints decreased initially and then increased sharply. The reason for the abnormal distribution of microhardness of the FZ at the top of the welded joints is that this area is close to the heat source during welding and then large numbers of hard {beta}-Mg{sub 17}(Al,Zn){sub 12} particles are precipitated. Hence, in this case, the effect of dispersion strengthening dominated the microhardness.

  17. Detection and Differentiation of Neutral Organic Compounds by [superscript 19]F NMR with a Tungsten Calix[4]arene Imido Complex

    E-Print Network [OSTI]

    Zhao, Yanchuan

    Fluorinated tungsten calix[4]arene imido complexes were synthesized and used as receptors to detect and differentiate neutral organic compounds. It was found that the binding of specific neutral organic molecules to the ...

  18. Chapter 30: Quantum Physics 9. The tungsten filament in a standard light bulb can be considered a blackbody radiator.

    E-Print Network [OSTI]

    Kioussis, Nicholas

    . 1 Chapter 30: Quantum Physics 9. The tungsten filament in a standard light bulb can be considered frequency is that of infrared electromagnetic radiation, the light bulb radiates more energy in the infrared

  19. Z-Selective Metathesis Homocoupling of 1,3-Dienes by Molybdenum and Tungsten Monoaryloxide Pyrrolide (MAP) Complexes

    E-Print Network [OSTI]

    Hoveyda, Amir H.

    Molybdenum or tungsten monoaryloxide pyrrolide (MAP) complexes that contain OHIPT as the aryloxide (hexaisopropylterphenoxide) are effective catalysts for homocoupling of simple (E)-1,3-dienes to give (E,Z,E)-trienes in ...

  20. Flow calculations for Yucca Mountain groundwater travel time (GWTT-95)

    SciTech Connect (OSTI)

    Altman, S.J.; Arnold, B.W.; Barnard, R.W.; Barr, G.E.; Ho, C.K.; McKenna, S.A.; Eaton, R.R.

    1996-09-01T23:59:59.000Z

    In 1983, high-level radioactive waste repository performance requirements related to groundwater travel time were defined by NRC subsystem regulation 10 CFR 60.113. Although DOE is not presently attempting to demonstrate compliance with that regulation, understanding of the prevalence of fast paths in the groundwater flow system remains a critical element of any safety analyses for a potential repository system at Yucca Mountain, Nevada. Therefore, this analysis was performed to allow comparison of fast-path flow against the criteria set forth in the regulation. Models developed to describe the conditions for initiation, propagation, and sustainability of rapid groundwater movement in both the unsaturated and saturated zones will form part of the technical basis for total- system analyses to assess site viability and site licensability. One of the most significant findings is that the fastest travel times in both unsaturated and saturated zones are in the southern portion of the potential repository, so it is recommended that site characterization studies concentrate on this area. Results support the assumptions regarding the importance of an appropriate conceptual model of groundwater flow and the incorporation of heterogeneous material properties into the analyses. Groundwater travel times are sensitive to variation/uncertainty in hydrologic parameters and in infiltration flux at upper boundary of the problem domain. Simulated travel times are also sensitive to poorly constrained parameters of the interaction between flow in fractures and in the matrix.