National Library of Energy BETA

Sample records for tspa-va base case

  1. DOE Spent Nuclear Fuel Information In Support of TSPA-VA

    SciTech Connect (OSTI)

    A. Brewer; D. Cresap; D. Fillmore; H. Loo; M. Ebner; R. McCormack

    1998-09-01

    RW has started the viability assessment (VA) effort to determine the feasibility of Yucca Mountain as the first geologic repository for spent nuclear fuel (SNF) and high-level waste. One component of the viability assessment will be a total system performance assessment (TSPA), based on the design concept and the scientific data and analysis available, describing the repository's probable behavior relative to the overall system performance standards. Thus, all the data collected from the Exploratory Studies Facility to-date have been incorporated into the latest TSPA model. In addition, the Repository Integration Program, an integrated probabilistic simulator, used in the TSPA has also been updated by Golder Associates Incorporated at December 1997. To ensure that the Department of Energy-owned (DOE-owned) SNF continues to be acceptable for disposal in the repository, it will be included in the TSPA-VA evaluation. A number of parameters are needed in the TSPA-VA models to predict the performance of the DOE-owned SNF materials placed into the potential repository. This report documents all of the basis and/or derivation for each of these parameters. A number of properties were not readily available at the time the TSPA-VA data was requested. Thus, expert judgement and opinion was utilized to determine a best property value. The performance of the DOE-owned SNF will be published as part of the TSPA-VA report. Each DOE site will be collecting better data as the DOE SNF program moves closer to repository license application. As required by the RW-0333P, the National Spent Nuclear Fuel Program will be assisting each site in qualifying the information used to support the performance assessment evaluations.

  2. Viability Assessment of a Repository at Yucca Mountain. Volume 3: Total System Performance Assessment

    SciTech Connect (OSTI)

    1998-12-01

    This volume reports the development of TSPA for the VA. This first section defines the general process involved in developing any TSPA, it describes the overall TSPA process as implemented by programs in the US and elsewhere in the world, and discusses the acceptability of TSPA as a process or tool for analyzing a nuclear waste repository system. Section 2 discusses the more specific use of the TSPA process for the TSPA-VA for Yucca Mountain, including goals, approach, and methods. It also includes a very brief synopsis of TSPA-VA results. Section 3 briefly discusses each of the component models that comprise the TSPA-VA. Each TSPA component model represents a discrete set of processes. The TSPA-VA components are: unsaturated zone flow, thermal hydrology, near- field geochemical environment, waste package degradation, waste form alteration and mobilization, unsaturated zone transport, saturated zone flow and transport, and biosphere. For each of these components, this section introduces the conceptualization of each individual process, describes the data sources, and discusses model parameter development and computer methods used to simulate each component. Section 4 explains the mechanics of how the individual TSPA components were combined into a ''base case'' and then provides the ''expected value'' results of a deterministic base case analysis. Section 4 also contains a description of the probabilistic analyses and results that help determine the relative importance of the various TSPA components and the data used to describe the components. Section 5 addresses sensitivity studies run for each of the TSPA components to understand how uncertainty in various parameters within a component change the TSPA results. Section 6 presents the findings of the sensitivity studies run on the various components in Section 5, and prioritizes the findings of the entire set of uncertainty and sensitivity studies of the components relative to each other. Section 6 also discusses

  3. 1980 Base case and feasibility analysis

    SciTech Connect (OSTI)

    1993-03-01

    This report describes a task of documenting a ``base case`` and performing a feasibility analysis for a national residential energy efficiency program for new homes, The principal objective of the task wasto estimate the energy consumption of typical homes built in 1980 and then to identify and assess the feasibility of methods to reduce that consumption by 50%. The goal of the program by the year 2000 is to reduce heating and cooling energy use in new homes built under the program to one-half of the energy use in typical new homes built in 1980. The task also calls for determining whether the program goal should be revised, based on the analysis.

  4. 1980 Base case and feasibility analysis

    SciTech Connect (OSTI)

    Not Available

    1993-03-01

    This report describes a task of documenting a base case'' and performing a feasibility analysis for a national residential energy efficiency program for new homes, The principal objective of the task wasto estimate the energy consumption of typical homes built in 1980 and then to identify and assess the feasibility of methods to reduce that consumption by 50%. The goal of the program by the year 2000 is to reduce heating and cooling energy use in new homes built under the program to one-half of the energy use in typical new homes built in 1980. The task also calls for determining whether the program goal should be revised, based on the analysis.

  5. Definition of the base analysis case of the interim performance assessment

    SciTech Connect (OSTI)

    Mann, F.M.

    1995-12-01

    The base analysis case for the ``Hanford Low-Level Tank Waste Interim Performance Assessment`` is defined. Also given are brief description of the sensitivity cases.

  6. Chiller condition monitoring using topological case-based modeling

    SciTech Connect (OSTI)

    Tsutsui, Hiroaki; Kamimura, Kazuyuki

    1996-11-01

    To increase energy efficiency and economy, commercial building projects now often utilize centralized, shared sources of heat such as district heating and cooling (DHC) systems. To maintain efficiency, precise monitoring and scheduling of maintenance for chillers and heat pumps is essential. Low-performance operation results in energy loss, while unnecessary maintenance is expensive and wasteful. Plant supervisors are responsible for scheduling and supervising maintenance. Modeling systems that assist in analyzing system deterioration are of great benefit for these tasks. Topological case-based modeling (TCBM) (Tsutsui et al. 1993; Tsutsui 1995) is an effective tool for chiller performance deterioration monitoring. This paper describes TCBM and its application to this task using recorded historical performance data.

  7. Well casing-based geophysical sensor apparatus, system and method

    DOE Patents [OSTI]

    Daily, William D.

    2010-03-09

    A geophysical sensor apparatus, system, and method for use in, for example, oil well operations, and in particular using a network of sensors emplaced along and outside oil well casings to monitor critical parameters in an oil reservoir and provide geophysical data remote from the wells. Centralizers are affixed to the well casings and the sensors are located in the protective spheres afforded by the centralizers to keep from being damaged during casing emplacement. In this manner, geophysical data may be detected of a sub-surface volume, e.g. an oil reservoir, and transmitted for analysis. Preferably, data from multiple sensor types, such as ERT and seismic data are combined to provide real time knowledge of the reservoir and processes such as primary and secondary oil recovery.

  8. Fuel Cycle Analysis Framework Base Cases for the IAEA/INPRO GAINS Collaborative Project

    SciTech Connect (OSTI)

    Brent Dixon

    2012-09-01

    Thirteen countries participated in the Collaborative Project GAINS “Global Architecture of Innovative Nuclear Energy Systems Based on Thermal and Fast Reactors Including a Closed Fuel Cycle”, which was the primary activity within the IAEA/INPRO Program Area B: “Global Vision on Sustainable Nuclear Energy” for the last three years. The overall objective of GAINS was to develop a standard framework for assessing future nuclear energy systems taking into account sustainable development, and to validate results through sample analyses. This paper details the eight scenarios that constitute the GAINS framework base cases for analysis of the transition to future innovative nuclear energy systems. The framework base cases provide a reference for users of the framework to start from in developing and assessing their own alternate systems. Each base case is described along with performance results against the GAINS sustainability evaluation metrics. The eight cases include four using a moderate growth projection and four using a high growth projection for global nuclear electricity generation through 2100. The cases are divided into two sets, addressing homogeneous and heterogeneous scenarios developed by GAINS to model global fuel cycle strategies. The heterogeneous world scenario considers three separate nuclear groups based on their fuel cycle strategies, with non-synergistic and synergistic cases. The framework base case analyses results show the impact of these different fuel cycle strategies while providing references for future users of the GAINS framework. A large number of scenario alterations are possible and can be used to assess different strategies, different technologies, and different assumptions about possible futures of nuclear power. Results can be compared to the framework base cases to assess where these alternate cases perform differently versus the sustainability indicators.

  9. Knowledge representation and the application of case-based reasoning in engineering design

    SciTech Connect (OSTI)

    Bhangal, J.S.; Esat, I.

    1996-12-31

    This paper is an assessment of the requirements in the application of Case-based Reasoning to Engineering Design. The methods in which a CBR system will assist a designer when he/she is presented with a problem specification and the various methods which need to be understood before attempting to build an such expert system are discussed here. The problem is two fold, firstly the methods of utilizing CBR are varied and secondly the method of representing the knowledge in design also needs to be established. How a design represented basically differs for each application and this is a decision which needs to be made when setting up the case memory but the methods used are discussed here. CBR itself can also be utilized in various ways and it has been seen from previous applications that a hybrid approach can produce the best results.

  10. A self-adaptive case-based reasoning system for dose planning in prostate cancer radiotherapy

    SciTech Connect (OSTI)

    Mishra, Nishikant; Petrovic, Sanja; Sundar, Santhanam

    2011-12-15

    Purpose: Prostate cancer is the most common cancer in the male population. Radiotherapy is often used in the treatment for prostate cancer. In radiotherapy treatment, the oncologist makes a trade-off between the risk and benefit of the radiation, i.e., the task is to deliver a high dose to the prostate cancer cells and minimize side effects of the treatment. The aim of our research is to develop a software system that will assist the oncologist in planning new treatments. Methods: A nonlinear case-based reasoning system is developed to capture the expertise and experience of oncologists in treating previous patients. Importance (weights) of different clinical parameters in the dose planning is determined by the oncologist based on their past experience, and is highly subjective. The weights are usually fixed in the system. In this research, the weights are updated automatically each time after generating a treatment plan for a new patient using a group based simulated annealing approach. Results: The developed approach is analyzed on the real data set collected from the Nottingham University Hospitals NHS Trust, City Hospital Campus, UK. Extensive experiments show that the dose plan suggested by the proposed method is coherent with the dose plan prescribed by an experienced oncologist or even better. Conclusions: The developed case-based reasoning system enables the use of knowledge and experience gained by the oncologist in treating new patients. This system may play a vital role to assist the oncologist in making a better decision in less computational time; it utilizes the success rate of the previously treated patients and it can also be used in teaching and training processes.

  11. An approach to model validation and model-based prediction -- polyurethane foam case study.

    SciTech Connect (OSTI)

    Dowding, Kevin J.; Rutherford, Brian Milne

    2003-07-01

    Enhanced software methodology and improved computing hardware have advanced the state of simulation technology to a point where large physics-based codes can be a major contributor in many systems analyses. This shift toward the use of computational methods has brought with it new research challenges in a number of areas including characterization of uncertainty, model validation, and the analysis of computer output. It is these challenges that have motivated the work described in this report. Approaches to and methods for model validation and (model-based) prediction have been developed recently in the engineering, mathematics and statistical literatures. In this report we have provided a fairly detailed account of one approach to model validation and prediction applied to an analysis investigating thermal decomposition of polyurethane foam. A model simulates the evolution of the foam in a high temperature environment as it transforms from a solid to a gas phase. The available modeling and experimental results serve as data for a case study focusing our model validation and prediction developmental efforts on this specific thermal application. We discuss several elements of the ''philosophy'' behind the validation and prediction approach: (1) We view the validation process as an activity applying to the use of a specific computational model for a specific application. We do acknowledge, however, that an important part of the overall development of a computational simulation initiative is the feedback provided to model developers and analysts associated with the application. (2) We utilize information obtained for the calibration of model parameters to estimate the parameters and quantify uncertainty in the estimates. We rely, however, on validation data (or data from similar analyses) to measure the variability that contributes to the uncertainty in predictions for specific systems or units (unit-to-unit variability). (3) We perform statistical analyses and

  12. Model-based performance monitoring: Review of diagnostic methods and chiller case study

    SciTech Connect (OSTI)

    Haves, Phil; Khalsa, Sat Kartar

    2000-05-01

    The paper commences by reviewing the variety of technical approaches to the problem of detecting and diagnosing faulty operation in order to improve the actual performance of buildings. The review covers manual and automated methods, active testing and passive monitoring, the different classes of models used in fault detection, and methods of diagnosis. The process of model-based fault detection is then illustrated by describing the use of relatively simple empirical models of chiller energy performance to monitor equipment degradation and control problems. The CoolTools(trademark) chiller model identification package is used to fit the DOE-2 chiller model to on-site measurements from a building instrumented with high quality sensors. The need for simple algorithms to reject transient data, detect power surges and identify control problems is discussed, as is the use of energy balance checks to detect sensor problems. The accuracy with which the chiller model can be expected! to predict performance is assessed from the goodness of fit obtained and the implications for fault detection sensitivity and sensor accuracy requirements are discussed. A case study is described in which the model was applied retroactively to high-quality data collected in a San Francisco office building as part of a related project (Piette et al. 1999).

  13. Habitat-Lite: A GSC case study based on free text terms for environmental metadata

    SciTech Connect (OSTI)

    Kyrpides, Nikos; Hirschman, Lynette; Clark, Cheryl; Cohen, K. Bretonnel; Mardis, Scott; Luciano, Joanne; Kottmann, Renzo; Cole, James; Markowitz, Victor; Kyrpides, Nikos; Field, Dawn

    2008-04-01

    There is an urgent need to capture metadata on the rapidly growing number of genomic, metagenomic and related sequences, such as 16S ribosomal genes. This need is a major focus within the Genomic Standards Consortium (GSC), and Habitat is a key metadata descriptor in the proposed 'Minimum Information about a Genome Sequence' (MIGS) specification. The goal of the work described here is to provide a light-weight, easy-to-use (small) set of terms ('Habitat-Lite') that captures high-level information about habitat while preserving a mapping to the recently launched Environment Ontology (EnvO). Our motivation for building Habitat-Lite is to meet the needs of multiple users, such as annotators curating these data, database providers hosting the data, and biologists and bioinformaticians alike who need to search and employ such data in comparative analyses. Here, we report a case study based on semi-automated identification of terms from GenBank and GOLD. We estimate that the terms in the initial version of Habitat-Lite would provide useful labels for over 60% of the kinds of information found in the GenBank isolation-source field, and around 85% of the terms in the GOLD habitat field. We present a revised version of Habitat-Lite and invite the community's feedback on its further development in order to provide a minimum list of terms to capture high-level habitat information and to provide classification bins needed for future studies.

  14. Code cases for implementing risk-based inservice testing in the ASME OM code

    SciTech Connect (OSTI)

    Rowley, C.W.

    1996-12-01

    Historically inservice testing has been reasonably effective, but quite costly. Recent applications of plant PRAs to the scope of the IST program have demonstrated that of the 30 pumps and 500 valves in the typical plant IST program, less than half of the pumps and ten percent of the valves are risk significant. The way the ASME plans to tackle this overly-conservative scope for IST components is to use the PRA and plant expert panels to create a two tier IST component categorization scheme. The PRA provides the quantitative risk information and the plant expert panel blends the quantitative and deterministic information to place the IST component into one of two categories: More Safety Significant Component (MSSC) or Less Safety Significant Component (LSSC). With all the pumps and valves in the IST program placed in MSSC or LSSC categories, two different testing strategies will be applied. The testing strategies will be unique for the type of component, such as centrifugal pump, positive displacement pump, MOV, AOV, SOV, SRV, PORV, HOV, CV, and MV. A series of OM Code Cases are being developed to capture this process for a plant to use. One Code Case will be for Component Importance Ranking. The remaining Code Cases will develop the MSSC and LSSC testing strategy for type of component. These Code Cases are planned for publication in early 1997. Later, after some industry application of the Code Cases, the alternative Code Case requirements will gravitate to the ASME OM Code as appendices.

  15. UXO detection and identification based on intrinsic target polarizabilities: A case history

    SciTech Connect (OSTI)

    Gasperikova, E.; Smith, J.T.; Morrison, H.F.; Becker, A.; Kappler, K.

    2008-07-15

    Electromagnetic induction data parameterized in time dependent object intrinsic polarizabilities allow discrimination of unexploded ordnance (UXO) from false targets (scrap metal). Data from a cart-mounted system designed for discrimination of UXO with 20 mm to 155 mm diameters are used. Discrimination of UXO from irregular scrap metal is based on the principal dipole polarizabilities of a target. A near-intact UXO displays a single major polarizability coincident with the long axis of the object and two equal smaller transverse polarizabilities, whereas metal scraps have distinct polarizability signatures that rarely mimic those of elongated symmetric bodies. Based on a training data set of known targets, object identification was made by estimating the probability that an object is a single UXO. Our test survey took place on a military base where both 4.2-inch mortar shells and scrap metal were present. The results show that we detected and discriminated correctly all 4.2-inch mortars, and in that process we added 7%, and 17%, respectively, of dry holes (digging scrap) to the total number of excavations in two different survey modes. We also demonstrated a mode of operation that might be more cost effective than the current practice.

  16. Aminoindazole PDK1 Inhibitors: A Case Study in Fragment-Based Drug Discovery

    SciTech Connect (OSTI)

    Medina, Jesus R.; Blackledge, Charles W.; Heerding, Dirk A.; Campobasso, Nino; Ward, Paris; Briand, Jacques; Wright, Lois; Axten, Jeffrey M.

    2012-05-29

    Fragment screening of phosphoinositide-dependent kinase-1 (PDK1) in a biochemical kinase assay afforded hits that were characterized and prioritized based on ligand efficiency and binding interactions with PDK1 as determined by NMR. Subsequent crystallography and follow-up screening led to the discovery of aminoindazole 19, a potent leadlike PDK1 inhibitor with high ligand efficiency. Well-defined structure-activity relationships and protein crystallography provide a basis for further elaboration and optimization of 19 as a PDK1 inhibitor.

  17. Appendix E: Other NEMS-MP results for the base case and scenarios.

    SciTech Connect (OSTI)

    Plotkin, S. E.; Singh, M. K.; Energy Systems

    2009-12-03

    The NEMS-MP model generates numerous results for each run of a scenario. (This model is the integrated National Energy Modeling System [NEMS] version used for the Multi-Path Transportation Futures Study [MP].) This appendix examines additional findings beyond the primary results reported in the Multi-Path Transportation Futures Study: Vehicle Characterization and Scenario Analyses (Reference 1). These additional results are provided in order to help further illuminate some of the primary results. Specifically discussed in this appendix are: (1) Energy use results for light vehicles (LVs), including details about the underlying total vehicle miles traveled (VMT), the average vehicle fuel economy, and the volumes of the different fuels used; (2) Resource fuels and their use in the production of ethanol, hydrogen (H{sub 2}), and electricity; (3) Ethanol use in the scenarios (i.e., the ethanol consumption in E85 vs. other blends, the percent of travel by flex fuel vehicles on E85, etc.); (4) Relative availability of E85 and H2 stations; (5) Fuel prices; (6) Vehicle prices; and (7) Consumer savings. These results are discussed as follows: (1) The three scenarios (Mixed, (P)HEV & Ethanol, and H2 Success) when assuming vehicle prices developed through literature review; (2) The three scenarios with vehicle prices that incorporate the achievement of the U.S. Department of Energy (DOE) program vehicle cost goals; (3) The three scenarios with 'literature review' vehicle prices, plus vehicle subsidies; and (4) The three scenarios with 'program goals' vehicle prices, plus vehicle subsidies. The four versions or cases of each scenario are referred to as: Literature Review No Subsidies, Program Goals No Subsidies, Literature Review with Subsidies, and Program Goals with Subsidies. Two additional points must be made here. First, none of the results presented for LVs in this section include Class 2B trucks. Results for this class are included occasionally in Reference 1. They

  18. Lipid-Based Nanodiscs as Models for Studying Mesoscale Coalescence A Transport Limited Case

    SciTech Connect (OSTI)

    Hu, Andrew; Fan, Tai-Hsi; Katsaras, John; Xia, Yan; Li, Ming; Nieh, Mu-Ping

    2014-01-01

    Lipid-based nanodiscs (bicelles) are able to form in mixtures of long- and short-chain lipids. Initially, they are of uniform size but grow upon dilution. Previously, nanodisc growth kinetics have been studied using time-resolved small angle neutron scattering (SANS), a technique which is not well suited for probing their change in size immediately after dilution. To address this, we have used dynamic light scattering (DLS), a technique which permits the collection of useful data in a short span of time after dilution of the system. The DLS data indicate that the negatively charged lipids in nanodiscs play a significant role in disc stability and growth. Specifically, the charged lipids are most likely drawn out from the nanodiscs into solution, thereby reducing interparticle repulsion and enabling the discs to grow. We describe a population balance model, which takes into account Coulombic interactions and adequately predicts the initial growth of nanodiscs with a single parameter i.e., surface potential. The results presented here strongly support the notion that the disc coalescence rate strongly depends on nanoparticle charge density. The present system containing low-polydispersity lipid nanodiscs serves as a good model for understanding how charged discoidal micelles coalesce.

  19. Technology Solutions Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. This research study by Building America team Consortium for Advanced Residential Buildings demonstrated the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant developed by the Western Cooling Efficiency Center at University of California Davis. CARB demonstrated this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  20. Optimized periodic verification testing blended risk and performance-based MOV inservice test program an application of ASME code case OMN-1

    SciTech Connect (OSTI)

    Sellers, C.; Fleming, K.; Bidwell, D.; Forbes, P.

    1996-12-01

    This paper presents an application of ASME Code Case OMN-1 to the GL 89-10 Program at the South Texas Project Electric Generating Station (STPEGS). Code Case OMN-1 provides guidance for a performance-based MOV inservice test program that can be used for periodic verification testing and allows consideration of risk insights. Blended probabilistic and deterministic evaluation techniques were used to establish inservice test strategies including both test methods and test frequency. Described in the paper are the methods and criteria for establishing MOV safety significance based on the STPEGS probabilistic safety assessment, deterministic considerations of MOV performance characteristics and performance margins, the expert panel evaluation process, and the development of inservice test strategies. Test strategies include a mix of dynamic and static testing as well as MOV exercising.

  1. The Milling Assistant, Case-Based Reasoning, and machining strategy: A report on the development of automated numerical control programming systems at New Mexico State University

    SciTech Connect (OSTI)

    Burd, W.; Culler, D.; Eskridge, T.; Cox, L.; Slater, T.

    1993-08-01

    The Milling Assistant (MA) programming system demonstrates the automated development of tool paths for Numerical Control (NC) machine tools. By integrating a Case-Based Reasoning decision processor with a commercial CAD/CAM software, intelligent tool path files for milled and point-to-point features can be created. The operational system is capable of reducing the time required to program a variety of parts and improving product quality by collecting and utilizing ``best of practice`` machining strategies.

  2. Prevalence and contribution of BRCA1 mutations in breast cancer and ovarian cancer: Results from three US population-based case-control studies of ovarian cancer

    SciTech Connect (OSTI)

    Whittemore, A.S.; Gong, G.; Itnyre, J.

    1997-03-01

    We investigate the familial risks of cancers of the breast and ovary, using data pooled from three population-based case-control studies of ovarian cancer that were conducted in the United States. We base estimates of the frequency of mutations of BRCA1 (and possibly other genes) on the reported occurrence of breast cancer and ovarian cancer in the mothers and sisters of 922 women with incident ovarian cancer (cases) and in 922 women with no history of ovarian cancer (controls). Segregation analysis and goodness-of-fit testing of genetic models suggest that rare mutations (frequency .0014; 95% confidence interval .0002-.011) account for all the observed aggregation of breast cancer and ovarian cancer in these families. The estimated risk of breast cancer by age 80 years is 73.5% in mutation carriers and 6.8% in noncarriers. The corresponding estimates for ovarian cancer are 27.8% in carriers and 1.8% in noncarriers. For cancer risk in carriers, these estimates are lower than those obtained from families selected for high cancer prevalence. The estimated proportion of all U.S. cancer diagnoses, by age 80 years, that are due to germ-line BRCA1 mutations is 3.0% for breast cancer and 4.4% for ovarian cancer. Aggregation of breast cancer and ovarian cancer was less evident in the families of 169 cases with borderline ovarian cancers than in the families of cases with invasive cancers. Familial aggregation did not differ by the ethnicity of the probands, although the number of non-White and Hispanic cases (N = 99) was sparse. 14 refs., 3 figs., 6 tabs.

  3. Analyzing simulation-based PRA data through traditional and topological clustering: A BWR station blackout case study

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Maljovec, D.; Liu, S.; Wang, B.; Mandelli, D.; Bremer, P. -T.; Pascucci, V.; Smith, C.

    2015-07-14

    Here, dynamic probabilistic risk assessment (DPRA) methodologies couple system simulator codes (e.g., RELAP and MELCOR) with simulation controller codes (e.g., RAVEN and ADAPT). Whereas system simulator codes model system dynamics deterministically, simulation controller codes introduce both deterministic (e.g., system control logic and operating procedures) and stochastic (e.g., component failures and parameter uncertainties) elements into the simulation. Typically, a DPRA is performed by sampling values of a set of parameters and simulating the system behavior for that specific set of parameter values. For complex systems, a major challenge in using DPRA methodologies is to analyze the large number of scenarios generated,more » where clustering techniques are typically employed to better organize and interpret the data. In this paper, we focus on the analysis of two nuclear simulation datasets that are part of the risk-informed safety margin characterization (RISMC) boiling water reactor (BWR) station blackout (SBO) case study. We provide the domain experts a software tool that encodes traditional and topological clustering techniques within an interactive analysis and visualization environment, for understanding the structures of such high-dimensional nuclear simulation datasets. We demonstrate through our case study that both types of clustering techniques complement each other for enhanced structural understanding of the data.« less

  4. Analyzing simulation-based PRA data through traditional and topological clustering: A BWR station blackout case study

    SciTech Connect (OSTI)

    Maljovec, D.; Liu, S.; Wang, B.; Mandelli, D.; Bremer, P. -T.; Pascucci, V.; Smith, C.

    2015-07-14

    Here, dynamic probabilistic risk assessment (DPRA) methodologies couple system simulator codes (e.g., RELAP and MELCOR) with simulation controller codes (e.g., RAVEN and ADAPT). Whereas system simulator codes model system dynamics deterministically, simulation controller codes introduce both deterministic (e.g., system control logic and operating procedures) and stochastic (e.g., component failures and parameter uncertainties) elements into the simulation. Typically, a DPRA is performed by sampling values of a set of parameters and simulating the system behavior for that specific set of parameter values. For complex systems, a major challenge in using DPRA methodologies is to analyze the large number of scenarios generated, where clustering techniques are typically employed to better organize and interpret the data. In this paper, we focus on the analysis of two nuclear simulation datasets that are part of the risk-informed safety margin characterization (RISMC) boiling water reactor (BWR) station blackout (SBO) case study. We provide the domain experts a software tool that encodes traditional and topological clustering techniques within an interactive analysis and visualization environment, for understanding the structures of such high-dimensional nuclear simulation datasets. We demonstrate through our case study that both types of clustering techniques complement each other for enhanced structural understanding of the data.

  5. A case study for cloud based high throughput analysis of NGS data using the globus genomics system

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Bhuvaneshwar, Krithika; Sulakhe, Dinanath; Gauba, Robinder; Rodriguez, Alex; Madduri, Ravi; Dave, Utpal; Lacinski, Lukasz; Foster, Ian; Gusev, Yuriy; Madhavan, Subha

    2015-01-01

    Next generation sequencing (NGS) technologies produce massive amounts of data requiring a powerful computational infrastructure, high quality bioinformatics software, and skilled personnel to operate the tools. We present a case study of a practical solution to this data management and analysis challenge that simplifies terabyte scale data handling and provides advanced tools for NGS data analysis. These capabilities are implemented using the “Globus Genomics” system, which is an enhanced Galaxy workflow system made available as a service that offers users the capability to process and transfer data easily, reliably and quickly to address end-to-end NGS analysis requirements. The Globus Genomicsmore » system is built on Amazon's cloud computing infrastructure. The system takes advantage of elastic scaling of compute resources to run multiple workflows in parallel and it also helps meet the scale-out analysis needs of modern translational genomics research.« less

  6. A case study for cloud based high throughput analysis of NGS data using the globus genomics system

    SciTech Connect (OSTI)

    Bhuvaneshwar, Krithika; Sulakhe, Dinanath; Gauba, Robinder; Rodriguez, Alex; Madduri, Ravi; Dave, Utpal; Lacinski, Lukasz; Foster, Ian; Gusev, Yuriy; Madhavan, Subha

    2015-01-01

    Next generation sequencing (NGS) technologies produce massive amounts of data requiring a powerful computational infrastructure, high quality bioinformatics software, and skilled personnel to operate the tools. We present a case study of a practical solution to this data management and analysis challenge that simplifies terabyte scale data handling and provides advanced tools for NGS data analysis. These capabilities are implemented using the “Globus Genomics” system, which is an enhanced Galaxy workflow system made available as a service that offers users the capability to process and transfer data easily, reliably and quickly to address end-to-end NGS analysis requirements. The Globus Genomics system is built on Amazon's cloud computing infrastructure. The system takes advantage of elastic scaling of compute resources to run multiple workflows in parallel and it also helps meet the scale-out analysis needs of modern translational genomics research.

  7. Emulating a System Dynamics Model with Agent-Based Models: A Methodological Case Study in Simulation of Diabetes Progression

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Schryver, Jack; Nutaro, James; Shankar, Mallikarjun

    2015-10-30

    An agent-based simulation model hierarchy emulating disease states and behaviors critical to progression of diabetes type 2 was designed and implemented in the DEVS framework. The models are translations of basic elements of an established system dynamics model of diabetes. In this model hierarchy, which mimics diabetes progression over an aggregated U.S. population, was dis-aggregated and reconstructed bottom-up at the individual (agent) level. Four levels of model complexity were defined in order to systematically evaluate which parameters are needed to mimic outputs of the system dynamics model. Moreover, the four estimated models attempted to replicate stock counts representing disease statesmore » in the system dynamics model, while estimating impacts of an elderliness factor, obesity factor and health-related behavioral parameters. Health-related behavior was modeled as a simple realization of the Theory of Planned Behavior, a joint function of individual attitude and diffusion of social norms that spread over each agent s social network. Although the most complex agent-based simulation model contained 31 adjustable parameters, all models were considerably less complex than the system dynamics model which required numerous time series inputs to make its predictions. In all three elaborations of the baseline model provided significantly improved fits to the output of the system dynamics model. The performances of the baseline agent-based model and its extensions illustrate a promising approach to translate complex system dynamics models into agent-based model alternatives that are both conceptually simpler and capable of capturing main effects of complex local agent-agent interactions.« less

  8. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science DMZ Case Studies Multi-facility Workflow Case Study Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638

  9. Roof-top solar energy potential under performance-based building energy codes: The case of Spain

    SciTech Connect (OSTI)

    Izquierdo, Salvador; Montanes, Carlos; Dopazo, Cesar; Fueyo, Norberto

    2011-01-15

    The quantification at regional level of the amount of energy (for thermal uses and for electricity) that can be generated by using solar systems in buildings is hindered by the availability of data for roof area estimation. In this note, we build on an existing geo-referenced method for determining available roof area for solar facilities in Spain to produce a quantitative picture of the likely limits of roof-top solar energy. The installation of solar hot water systems (SHWS) and photovoltaic systems (PV) is considered. After satisfying up to 70% (if possible) of the service hot water demand in every municipality, PV systems are installed in the remaining roof area. Results show that, applying this performance-based criterion, SHWS would contribute up to 1662 ktoe/y of primary energy (or 68.5% of the total thermal-energy demand for service hot water), while PV systems would provide 10 T W h/y of electricity (or 4.0% of the total electricity demand). (author)

  10. Final base case community analysis: Indian Springs, Nevada for the Clark County socioeconomic impact assessment of the proposed high- level nuclear waste repository at Yucca Mountain, Nevada

    SciTech Connect (OSTI)

    1992-06-18

    This document provides a base case description of the rural Clark County community of Indian Springs in anticipation of change associated with the proposed high-level nuclear waste repository at Yucca Mountain. As the community closest to the proposed site, Indian Springs may be seen by site characterization workers, as well as workers associated with later repository phases, as a logical place to live. This report develops and updates information relating to a broad spectrum of socioeconomic variables, thereby providing a `snapshot` or `base case` look at Indian Springs in early 1992. With this as a background, future repository-related developments may be analytically separated from changes brought about by other factors, thus allowing for the assessment of the magnitude of local changes associated with the proposed repository. Given the size of the community, changes that may be considered small in an absolute sense may have relatively large impacts at the local level. Indian Springs is, in many respects, a unique community and a community of contrasts. An unincorporated town, it is a small yet important enclave of workers on large federal projects and home to employees of small- scale businesses and services. It is a rural community, but it is also close to the urbanized Las Vega Valley. It is a desert community, but has good water resources. It is on flat terrain, but it is located within 20 miles of the tallest mountains in Nevada. It is a town in which various interest groups diverge on issues of local importance, but in a sense of community remains an important feature of life. Finally, it has a sociodemographic history of both surface transience and underlying stability. If local land becomes available, Indian Springs has some room for growth but must first consider the historical effects of growth on the town and its desired direction for the future.

  11. Case Studies

    Broader source: Energy.gov [DOE]

    The following case studies are examples of integrating renewable energy into Federal new construction and major renovation projects. Additional renewable energy case studies are also available.

  12. BBRN Factsheet: Case Study: Community Engagement | Department...

    Office of Environmental Management (EM)

    Case Study: Community Engagement, on the Community Home Energy Retrofit Project (CHERP), based in Claremont, California. Case Study: Community Engagement (197.35 KB) More Documents ...

  13. Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Case Studies Case Studies The following case studies will be included in the HEP report. Final case studies are due January 7, 2013. Lattice Gauge Theories - Lead: Doug Toussaint Simulations for Cosmic Frontier Experiments - Leads: Peter Nugent & Andrew Connelly Cosmic Microwave Background Data Analysis - Lead: Julian Borrill Cosmological Simulations - Lead: Salman Habib Plasma Accelerator Simulation Using Laser and Particle Beam Drivers - Leads: Cameron Geddes & Frank Tsung Community

  14. Application Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Studies Application Case Studies NERSC staff along with engineers have worked with NESAP applications to prepare for the Cori-Phase 2 system based on the Xeon Phi "Knights Landing" processor. We document the several optimization case studies below. Our presentations at ISC 16 IXPUG Workshop can all be found: https://www.ixpug.org/events/ixpug-isc-2016 Other pages of interest for those wishing to learn optimization strategies of Cori Phase 2 (Knights Landing): Getting Started Measuring

  15. DOE BiomassDevelopment and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header RDD Review Template

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header March 25, 2015 Terrestrial Feedstocks Timothy A. Volk SUNY ESF This presentation does not contain any proprietary, confidential, or otherwise restricted information Goal Statement * Develop, test and deploy a single pass cut and chip harvester combined with a handling, transportation and storage system that is effective and efficient in a range of

  16. SU-E-T-129: Dosimetric Evaluation of the Impact of Density Correction On Dose Calculation of Breast Cancer Treatment: A Study Based On RTOG 1005 Cases

    SciTech Connect (OSTI)

    Li, J; Yu, Y

    2014-06-01

    Purpose: RTOG 1005 requires density correction in the dose calculation of breast cancer radiation treatment. The aim of the study was to evaluate the impact of density correction on the dose calculation. Methods: Eight cases were studied, which were planned on an XiO treatment planning system with pixel-by-pixel density correction using a superposition algorithm, following RTOG 1005 protocol requirements. Four were protocol Arm 1 (standard whole breast irradiation with sequential boost) cases and four were Arm 2 (hypofractionated whole breast irradiation with concurrent boost) cases. The plans were recalculated with the same monitor units without density correction. Dose calculations with and without density correction were compared. Results: Results of Arm 1 and Arm 2 cases showed similar trends in the comparison. The average differences between the calculations with and without density correction (difference = Without - With) among all the cases were: -0.82 Gy (range: -2.65??0.18 Gy) in breast PTV Eval D95, ?0.75 Gy (range: ?1.23?0.26 Gy) in breast PTV Eval D90, ?1.00 Gy (range: ?2.46??0.29 Gy) in lumpectomy PTV Eval D95, ?0.78 Gy (range: ?1.30?0.11 Gy) in lumpectomy PTV Eval D90, ?0.43% (range: ?0.95??0.14%) in ipsilateral lung V20, ?0.81% (range: ?1.62??0.26%) in V16, ?1.95% (range: ?4.13??0.84%) in V10, ?2.64% (?5.55??1.04%) in V8, ?4.19% (range: ?6.92??1.81%) in V5, and ?4.95% (range: ?7.49??2.01%) in V4, respectively. The differences in other normal tissues were minimal. Conclusion: The effect of density correction was observed in breast target doses (an average increase of ?1 Gy in D95 and D90, compared to the calculation without density correction) and exposed ipsilateral lung volumes in low dose region (average increases of ?4% and ?5% in V5 and V4, respectively)

  17. Building America Case Study: Field Trial of an Aerosol-Based Enclosure Sealing Technology, Clovis, California (Fact Sheet), NREL (National Renewable Energy Laboratory)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Trial of an Aerosol-Based Enclosure Sealing Technology Clovis, California PROJECT INFORMATION Project Name: Field Trial of an Aerosol- Based Enclosure Sealing Technology Location: Clovis, CA Partners: De Young Properties deyoungproperties.com Building America Team: Alliance for Residential Building Innovation; Western Cooling Efficiency Center, University of California-Davis arbi.davisenergy.com wcec.ucdavis.edu Building Component: Building envelope Application: New, single-family Year Tested:

  18. NORASCO Case Engineering Group JV | Open Energy Information

    Open Energy Info (EERE)

    NORASCO Case Engineering Group JV Jump to: navigation, search Name: NORASCO & Case Engineering Group JV Place: India Sector: Solar Product: India-based JV developer of small solar...

  19. Fuel Cell Power Model Version 2: Startup Guide, System Designs, and Case Studies. Modeling Electricity, Heat, and Hydrogen Generation from Fuel Cell-Based Distributed Energy Systems

    SciTech Connect (OSTI)

    Steward, D.; Penev, M.; Saur, G.; Becker, W.; Zuboy, J.

    2013-06-01

    This guide helps users get started with the U.S. Department of Energy/National Renewable Energy Laboratory Fuel Cell Power (FCPower) Model Version 2, which is a Microsoft Excel workbook that analyzes the technical and economic aspects of high-temperature fuel cell-based distributed energy systems with the aim of providing consistent, transparent, comparable results. This type of energy system would provide onsite-generated heat and electricity to large end users such as hospitals and office complexes. The hydrogen produced could be used for fueling vehicles or stored for later conversion to electricity.

  20. Recirculating industrial air: The impact on air compliance and workers. Safety case study: Hill Air Force Base C-130 painting operations

    SciTech Connect (OSTI)

    LaPuma, P.T.

    1998-06-29

    The 1990 Clean Air Act Amendment resulted in new environmental regulations called the National Emission Standards for Hazardous Air Pollutants (NESHAPs). Industries such as painting facilities may have to treat large volumes of air, which drives the cost of an air control system. Recirculating a portion of the air back into the facility is an option to reduce the amount of air to be treated. A guided computer model written in Microsoft Excel 97% is developed to analyze worker safety and compliance costs with a focus on recirculation. The model has a chemical database containing over 1300 chemicals and requires inputs such as tasks performed, hazardous products used, and chemical make-up of the products. The model will predict indoor air concentrations in relation to occupational exposure limits (OELs). A case study is performed on a C-130 aircraft painting facility at Hill AFB, UT. The Aerospace NESHAP requires air pollution reductions in aircraft painting operations. The model predicts strontium chromate concentrations found in primer paints will reach 1000 times the OEL. Strontium chromate and other solid particulates are nearly unaffected by recirculation because the air is filtered prior to recirculation. The next highest chemical, hexamethylene diisocyanate (HDI), increases from 2.6 to 10.5 times the OEL at 0% and 75% recirculation, respectively. Due to the level of respiratory protection required for the strontium chromate, workers are well protected from the modest increases in concentrations caused by recirculating 75%. The initial cost of a VOC control system with no recirculation is $4.5 million and $1.8 million at 75% recirculation. To decide the best operating conditions for a facility, all options such as product substitution, operational changes or recirculation should be explored. The model is an excellent tool to evaluate these options.

  1. How do A-train Sensors Intercompare in the Retrieval of Above-Cloud Aerosol Optical Depth? A Case Study-based Assessment

    SciTech Connect (OSTI)

    Jethva, Hiren T.; Torres, Omar; Waquet, Fabien; Chand, Duli; Hu, Yong X.

    2014-01-15

    We inter-compare the above-cloud aerosol optical depth (ACAOD) of biomass burning plumes retrieved from different A-train sensors, i.e., MODIS, CALIOP, POLDER, and OMI. These sensors have shown independent capabilities to detect and retrieve aerosol loading above marine boundary layer clouds--a kind of situation often found over the Southeast Atlantic Ocean during dry burning season. A systematic one-to-one comparison reveals that, in general, all passive sensors and CALIOP-based research methods derive comparable ACAOD with differences mostly within 0.2 over homogeneous cloud fields. The 532-nm ACAOD retrieved by CALIOP operational algorithm is largely underestimated; however, it’s 1064-nm AOD when converted to 500 nm shows closer agreement to the passive sensors. Given the different types of sensor measurements processed with different algorithms, the close agreement between them is encouraging. Due to lack of adequate direct measurements above cloud, the validation of satellite-based ACAOD retrievals remains an open challenge. The inter-satellite comparison, however, can be useful for the relative evaluation and consistency check.

  2. FITTING OF THE DATA FOR DIFFUSION COEFFICIENTS IN UNSATURATED POROUS MEDIA

    SciTech Connect (OSTI)

    B. Bullard

    1999-05-01

    The purpose of this calculation is to evaluate diffusion coefficients in unsaturated porous media for use in the TSPA-VA analyses. Using experimental data, regression techniques were used to curve fit the diffusion coefficient in unsaturated porous media as a function of volumetric water content. This calculation substantiates the model fit used in Total System Performance Assessment-1995 An Evaluation of the Potential Yucca Mountain Repository (TSPA-1995), Section 6.5.4.

  3. Building America Case Study: Apartment Compartmentalization with an Aerosol-Based Sealing Process - Queens, NY; Technology Solutions for New and Existing Homes, Energy Efficiency & Renewable Energy (EERE)

    SciTech Connect (OSTI)

    2015-07-01

    Air sealing of building enclosures is a difficult and time-consuming process. Current methods in new construction require laborers to physically locate small and sometimes large holes in multiple assemblies and then manually seal each of them. The innovation demonstrated under this research study was the automated air sealing and compartmentalization of buildings through the use of an aerosolized sealant, developed by the Western Cooling Efficiency Center at University of California Davis.
    CARB sought to demonstrate this new technology application in a multifamily building in Queens, NY. The effectiveness of the sealing process was evaluated by three methods: air leakage testing of overall apartment before and after sealing, point-source testing of individual leaks, and pressure measurements in the walls of the target apartment during sealing. Aerosolized sealing was successful by several measures in this study. Many individual leaks that are labor-intensive to address separately were well sealed by the aerosol particles. In addition, many diffuse leaks that are difficult to identify and treat were also sealed. The aerosol-based sealing process resulted in an average reduction of 71% in air leakage across three apartments and an average apartment airtightness of 0.08 CFM50/SF of enclosure area.

  4. A GIS-based Adaptive Management Decision Support System to Develop a Multi-Objective Framework: A case study utilizing GIS technologies and physically-based models to archieve improved decision making for site management.

    SciTech Connect (OSTI)

    Coleman, Andre M.; Wigmosta, Mark S.; Lane, Leonard J.; Tagestad, Jerry D.; Roberts, Damon

    2008-06-26

    The notion of Adaptive Management (AM) allows for the realization and adjustment of management practices in response to elements of uncertainty. In terms of natural resource management, this will typically integrate monitoring, databases, simulation modeling, decision theory, and expert judgment to evaluate management alternatives and adapt them as necessary to continually improve the natural resource condition as defined by the stakeholders. Natural resource management scenarios can often be expressed, viewed, and understood as a spatial and temporal problem. The integration of Geographic Information System (GIS) technologies and physically-based models provide an effective state-of-the-art solution for deriving, understanding, and applying AM scenarios for land use and remediation. A recently developed GIS-based adaptive management decision support system is presented for the U.S. Department of Defense Yakima Training Center near Yakima, Washington.

  5. In-Drift Microbial Communities

    SciTech Connect (OSTI)

    D. Jolley

    2000-11-09

    As directed by written work direction (CRWMS M and O 1999f), Performance Assessment (PA) developed a model for microbial communities in the engineered barrier system (EBS) as documented here. The purpose of this model is to assist Performance Assessment and its Engineered Barrier Performance Section in modeling the geochemical environment within a potential repository drift for TSPA-SR/LA, thus allowing PA to provide a more detailed and complete near-field geochemical model and to answer the key technical issues (KTI) raised in the NRC Issue Resolution Status Report (IRSR) for the Evolution of the Near Field Environment (NFE) Revision 2 (NRC 1999). This model and its predecessor (the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document, CRWMS M and O 1998a) was developed to respond to the applicable KTIs. Additionally, because of the previous development of the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a), the M and O was effectively able to resolve a previous KTI concern regarding the effects of microbial processes on seepage and flow (NRC 1998). This document supercedes the in-drift microbial communities model as documented in Chapter 4 of the TSPA-VA Technical Basis Document (CRWMS M and O 1998a). This document provides the conceptual framework of the revised in-drift microbial communities model to be used in subsequent performance assessment (PA) analyses.

  6. Development and Deployment of a Short Rotation Woody Crops Harvesting System Based on a Case New Holland Forage Harvester and SRC Woody Crop Header

    SciTech Connect (OSTI)

    Eisenbies, Mark; Volk, Timothy

    2014-10-03

    Demand for bioenergy sourced from woody biomass is projected to increase; however, the expansion and rapid deployment of short rotation woody crop systems in the United States has been constrained by high production costs and sluggish market acceptance due to problems with quality and consistency from first-generation harvesting systems. The objective of this study was to evaluate the effect of crop conditions on the performance of a single-pass, cut and chip harvester based on a standard New Holland FR-9000 series forage harvester with a dedicated 130FB short rotation coppice header, and the quality of chipped material. A time motion analysis was conducted to track the movement of machine and chipped material through the system for 153 separate loads over 10 days on a 54-ha harvest. Harvester performance was regulated by either ground conditions, or standing biomass on 153 loads. Material capacities increased linearly with standing biomass up to 40 Mgwet ha-1 and plateaued between 70 and 90 Mgwet hr-1. Moisture contents ranged from 39 to 51% with the majority of samples between 43 and 45%. Loads produced in freezing weather (average temperature over 10 hours preceding load production) had 4% more chips greater than 25.4 mm (P < 0.0119). Over 1.5 Mgdry ha-1 of potentially harvested material (6-9% of a load) was left on site, of which half was commercially undesirable meristematic pieces. The New Holland harvesting system is a reliable and predictable platform for harvesting material over a wide range of standing biomass; performance was consistent overall in 14 willow cultivars.

  7. On the applicability of surrogate-based MCMC-Bayesian inversion to the Community Land Model: Case studies at Flux tower sites

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Huang, Maoyi; Ray, Jaideep; Hou, Zhangshuan; Ren, Huiying; Liu, Ying; Swiler, Laura

    2016-06-01

    The Community Land Model (CLM) has been widely used in climate and Earth system modeling. Accurate estimation of model parameters is needed for reliable model simulations and predictions under current and future conditions, respectively. In our previous work, a subset of hydrological parameters has been identified to have significant impact on surface energy fluxes at selected flux tower sites based on parameter screening and sensitivity analysis, which indicate that the parameters could potentially be estimated from surface flux observations at the towers. To date, such estimates do not exist. In this paper, we assess the feasibility of applying a Bayesianmore » model calibration technique to estimate CLM parameters at selected flux tower sites under various site conditions. The parameters are estimated as a joint probability density function (PDF) that provides estimates of uncertainty of the parameters being inverted, conditional on climatologically-average latent heat fluxes derived from observations. We find that the simulated mean latent heat fluxes from CLM using the calibrated parameters are generally improved at all sites when compared to those obtained with CLM simulations using default parameter sets. Further, our calibration method also results in credibility bounds around the simulated mean fluxes which bracket the measured data. The modes (or maximum a posteriori values) and 95% credibility intervals of the site-specific posterior PDFs are tabulated as suggested parameter values for each site. Lastly, analysis of relationships between the posterior PDFs and site conditions suggests that the parameter values are likely correlated with the plant functional type, which needs to be confirmed in future studies by extending the approach to more sites.« less

  8. Technology Deployment Case Studies

    Broader source: Energy.gov [DOE]

    Find technology deployment case studies below. Click on each individual project link to see the full case study. You can also view a map of technology deployment case studies.

  9. Science DMZ Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Science DMZ Case Studies Science DMZ @ UF Science DMZ @ CU Science DMZ @ Penn & VTTI Science DMZ @ NOAA Science DMZ @ NERSC Science DMZ @ ALS Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet Live Home » Science Engagement » Case Studies » Science DMZ Case Studies Science Engagement Move your data Programs & Workshops Science Requirements Reviews Case Studies OSCARS Case Studies Science

  10. Before a Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings and Workshops Customer...

  11. Rate Case Elements

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proceeding Rate Information Residential Exchange Program Surplus Power Sales Reports Rate Case Elements BPA's rate cases are decided "on the record." That is, in making a decision...

  12. BP-12 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  13. BP-16 Rate Case

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Skip navigation links Financial Information Financial Public Processes Asset Management Cost Verification Process Rate Cases BP-18 Rate Case Related Publications Meetings...

  14. OSCARS Case Studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OSCARS & JGI Science DMZ Case Studies Multi-facility Workflow Case Study News & Publications ESnet News Publications and Presentations Galleries ESnet Awards and Honors Blog ESnet...

  15. BBRN Factsheet: Case Study: Community Engagement | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BBRN Factsheet: Case Study: Community Engagement BBRN Factsheet: Case Study: Community Engagement Case Study: Community Engagement, on the Community Home Energy Retrofit Project (CHERP), based in Claremont, California. Case Study: Community Engagement (197.35 KB) More Documents & Publications Better Buildings Network View | December 2015 Better Buildings Training Toolkit Better Buildings Network View | July-August 2015

  16. Business Case for CNG in Municipal Fleets (Presentation)

    SciTech Connect (OSTI)

    Johnson, C.

    2010-07-27

    Presentation about compressed natural gas in municipal fleets, assessing investment profitability, the VICE model, base-case scenarios, and pressing questions for fleet owners.

  17. EMGEO Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    EMGEO Case Study EMGEO Case Study June 20, 2016 Background EMGeo is composed of two geophysical imaging applications: one for subsurface imaging using electromagnetic data and another using seismic data. Although the applications model different physics (Maxwell's equations in one case, the elastic wave equation in another) they have much in common. We focus on the more involved part for solving the forward pass of the inverse scattering for the seismic part. The code takes advantage of

  18. OSCARS Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Network OSCARS How It Works Who's Using OSCARS? OSCARS and Future Tech OSCARS Standard and Open Grid Forum OSCARS Developers Community Read More... OSCARS Case Study...

  19. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    4 Reference case Table A2. Energy consumption by sector and source (quadrillion Btu per year, unless otherwise noted) Energy Information Administration Annual Energy Outlook 2014...

  20. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    Reference case Energy Information Administration Annual Energy Outlook 2014 Table A17. Renewable energy consumption by sector and source (quadrillion Btu) Sector and source...

  1. Fuel Cell Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Global Leader, Sustainable Engineering, Maintenance & Energy Management Whole Foods Market, Inc. Fuel Cell Case Study 2 Holistic Approach from Development to Operation WFM Energy ...

  2. Five case studies of multifamily weatherization programs

    SciTech Connect (OSTI)

    Kinney, L; Wilson, T.; Lewis, G.; MacDonald, M.

    1997-12-31

    The multifamily case studies that are the subject of this report were conducted to provide a better understanding of the approach taken by program operators in weatherizing large buildings. Because of significant variations in building construction and energy systems across the country, five states were selected based on their high level of multifamily weatherization. This report summarizes findings from case studies conducted by multifamily weatherization operations in five cities. The case studies were conducted between January and November 1994. Each of the case studies involved extensive interviews with the staff of weatherization subgrantees conducting multifamily weatherization, the inspection of 4 to 12 buildings weatherized between 1991 and 1993, and the analysis of savings and costs. The case studies focused on innovative techniques which appear to work well.

  3. The Business Case for SEP | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Business Case for SEP The Business Case for SEP Superior Energy Performance logo Facilities pursue certification to Superior Energy Performance® (SEP(tm)) to achieve an attractive return on investment while enhancing sustainability. The business case for SEP is based on detailed accounts from facilities that have implemented ISO 50001 and SEP. Gain an insider's view from these pioneers. Read the cost-benefit analysis and case studies, and view videos and presentations. Cost-Benefit Analysis

  4. Better Buildings Case Competition

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... and Investment Authority, the nation's first green bank, where I'm helping apply insights from our team's case proposals." -John D'Agostino Yale Team, 2013 9 2014 Closing ...

  5. EMGeo Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    methods (QMR in one case, and IDR in the other), both solvers are dominated by memory bandwidth intensive operations like sparse matrix-vector multiply (SpMV), dot...

  6. Early application case studies

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Early application case studies Early application case studies The Babbage test system was used to study representative applications and kernels in various scientific fields to gain experience with the challenges and strategies needed to optimize code performance on the MIC architecture. Below we highlight a few examples: BerkeleyGW The BerkeleyGW package is a materials science application that calculates electronic and optical properties with quantitative accuracy, a critical need in materials

  7. VASP Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    VASP Case Study VASP Case Study Code description and computational problem The Vienna Ab-initio Simulation Package (VASP) [1-2] is a widely used materials science application for performing ab-initio electronic structure calculations and quantum-mechanical molecular dynamics (MD) simulations using pseudopotentials or the projector-augmented wave method and a plane wave basis set. VASP computes an approximate solution to the many-body Schrödinger equation, either within the Density Functional

  8. WARP Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WARP Case Study WARP Case Study Background WARP is an accelerator code that is used to conduct detailed simulations of particle accelerators, among other high energy physics applications. It is a so-called Particle-In-Cell (PIC) code that solves for the motion of charged particles acted upon by electric and magnetic forces. The particle motion is computed in a Lagrangian sense, following individual particles. The electric and magnetic fields acting on the particle are considered to be Eulerian

  9. CESM Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    CESM Case Study CESM Case Study CESM MG2 Kernel Code Description The Community Earth System Model (CESM) is a coupled multi-physics code which consists of multiple model components: Atmosphere, Ocean, Sea-ice, Land-ice, Land, River Runoff, and Coupler. During the course of a CESM run, the model components integrate forward in time, periodically stopping to exchange information with the coupler. The active (dynamical) components are generally fully prognostic, and they are state-of-the-art

  10. Single casing reheat turbine

    SciTech Connect (OSTI)

    Matsushima, Tatsuro; Nishimura, Shigeo

    1999-07-01

    For conventional power plants, regenerative reheat steam turbines have been accepted as the most practical method to meet the demand for efficient and economical power generation. Recently the application of reheat steam turbines for combined cycle power plant began according to the development of large-capacity high temperature gas turbine. The two casing double flow turbine has been applied for this size of reheat steam turbine. The single casing reheat turbine can offer economical and compact power plant. Through development of HP-LP combined rotor and long LP blading series, Mitsubishi Heavy Industries, Ltd. had developed a single casing reheat steam turbine series and began to use it in actual plants. Six units are already in operation and another seven units are under manufacturing. Multiple benefits of single casing reheat turbine are smaller space requirements, shorter construction and erection period, equally good performance, easier operation and maintenance, shorter overhaul period, smaller initial investment, lower transportation expense and so on. Furthermore, single exhaust steam turbine makes possible to apply axial exhaust type, which will lower the height of T/G foundation and T/G housing. The single casing reheat turbine has not only compact and economical configuration itself but also it can reduce the cost of civil construction. In this paper, major developments and design features of the single casing reheat turbine are briefly discussed and operating experience, line-up and technical consideration for performance improvement are presented.

  11. Annual Energy Outlook 2016 Early Release: Annotated Summary of Two Cases

    U.S. Energy Information Administration (EIA) Indexed Site

    Early Release: Annotated Summary of Two Cases May 17, 2016 The Annual Energy Outlook 2016 (AEO2016) Early Release features two cases: the Reference case and a case excluding implementation of the Clean Power Plan (CPP) Reference case: A business-as-usual trend estimate, given known technology and technological and demographic trends. The Reference case assumes CPP compliance through mass-based standards that establish caps on CO2 emissions from fossil-fired generators covered by the CPP. The

  12. A Case for Climate Neutrality: Case Studies on Moving Towards...

    Open Energy Info (EERE)

    TOOL Name: A Case for Climate Neutrality: Case Studies on Moving Towards a Low Carbon Economy AgencyCompany Organization: United Nations Environment Programme (UNEP) Sector:...

  13. MFDn Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    MFDn Case Study MFDn Case Study Description of MFDn Many-Fermion Dynamics---nuclear, or MFDn, is a configuration interaction (CI) code for nuclear structure calculations. It is a platform independent Fortran 90 code using a hybrid MPI/ OpenMP programming model,and is being used on current supercomputers, such as Edison at NERSC, for ab initio calculations of atomic nuclei using realistic nucleon-nucleons and three-nucleon forces. A calculation consists of generating a many-body basis space,

  14. In Case of Emergency

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    In Case of Emergency In Case of Emergency Print Fire/Police Emergency: ext. 7911 Cell phone or off-site: 510-486-7911 When dialing from off-site, the following numbers need to be proceeded by 486-. the area code for the LBNL is (510). Fire Department (non-emergency): ext. 6015 Police Department (non-emergency): ext. 5472 Non-Emergency Reporting: ext. 6999 Additional information about emergency procedures at Berkeley Lab can be found on the red Emergency Response Guides posted around the lab and

  15. Geothermal Case Studies

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Young, Katherine

    2014-09-30

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  16. Geothermal Case Studies

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Young, Katherine

    database.) In fiscal year 2015, NREL is working with universities to populate additional case studies on OpenEI. The goal is to provide a large enough dataset to start conducting analyses of exploration programs to identify correlations between successful exploration plans for areas with similar geologic occurrence models.

  17. Risk Informed Safety Margin Characterization Case Study: Selection of

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Electrical Equipment To Be Subjected to Environmental Qualification | Department of Energy Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification Risk Informed Safety Margin Characterization Case Study: Selection of Electrical Equipment To Be Subjected to Environmental Qualification Reference 1 discussed key elements of the process for developing a margins-based "safety case" to support safe and efficient operation for an extended period. The

  18. FES Case Study Worksheets

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Worksheets FES Case Study Worksheets This workshop is closed, and the worksheets can no longer be edited. If you have questions, please report any problems or suggestions for improvement to Richard Gerber (ragerber@lbl.gov). Please choose your worksheet template: Lee Berry, Paul Bonoli, David Green [Read] Jeff Candy [Read] CS Chang [Read] Stephane Ethier [Read] Alex Friedman [Read] Kai Germaschewski [Read] Martin Greenwald [Read] Stephen Jardin [Read] Charlson Kim [Read] Scott Kruger [Read]

  19. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than ...

  20. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Albuquerque, NM DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready ...

  1. SEP CASE STUDY WEBINAR: MEDIMMUNE

    Office of Energy Efficiency and Renewable Energy (EERE)

    This Measurement and Verification Case Study webinar is the first in a series of case study webinars to highlight the successes of facilities that have achieved Superior Energy Performance (SEP)...

  2. 20th International Conference on Case Based Reasoning | GE Global...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Efficiency of Scientific Data Analysis: Scientific ... other traditional Artificial Intelligence (AI) algorithms out there. ... Basically, the big take away is that while most AI ...

  3. Load flow analysis: Base cases, data, diagrams, and results ...

    Office of Scientific and Technical Information (OSTI)

    The report summarizes the load flow model construction, simulation, and validation and describes the general capabilities of an information query system designed to access load ...

  4. The Business Case for Fuel Cells 2014: Powering the Bottom Line...

    Office of Environmental Management (EM)

    These include wastewater treatment plants, government buildings, universities, military bases, hospitals, and other sites. The Business Case for Fuel Cells 2014: Powering the ...

  5. Appendix A: Reference case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    12.92 12.90 13.09 -0.2% 1 Commercial trucks 8,501 to 10,000 pounds gross vehicle weight rating. 2 CAFE standard based on projected new vehicle sales. 3 Includes CAFE credits for...

  6. Patrick Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  7. Larry Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  8. Blake Case | Y-12 National Security Complex

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Blake Case Larry Case Patrick Case Dorothy Coker Gordon Fee Linda Fellers Louis Freels Marie Guy Nathan Henry Agnes Houser John Rice Irwin Harvey Kite Charlie Manning Alice...

  9. Technology Deployment Case Studies | Department of Energy

    Office of Environmental Management (EM)

    Deployment Technology Deployment Case Studies Technology Deployment Case Studies These case studies describe evaluations of energy-efficient technologies being used in federal...

  10. Water Efficiency Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Water Efficiency Case Studies Water Efficiency Case Studies These case studies offer examples of water efficiency projects implemented by federal agencies. They are organized by ...

  11. Explosively separable casing

    DOE Patents [OSTI]

    Jacobson, Albin K. (Albuquerque, NM); Rychnovsky, Raymond E. (Livermore, CA); Visbeck, Cornelius N. (Livermore, CA)

    1985-01-01

    An explosively separable casing including a cylindrical afterbody and a circular cover for one end of the afterbody is disclosed. The afterbody has a cylindrical tongue extending longitudinally from one end which is matingly received in a corresponding groove in the cover. The groove is sized to provide a pocket between the end of the tongue and the remainder of the groove so that an explosive can be located therein. A seal is also provided between the tongue and the groove for sealing the pocket from the atmosphere. A frangible holding device is utilized to hold the cover to the afterbody. When the explosive is ignited, the increase in pressure in the pocket causes the cover to be accelerated away from the afterbody. Preferably, the inner wall of the afterbody is in the same plane as the inner wall of the tongue to provide a maximum space for storage in the afterbody and the side wall of the cover is thicker than the side wall of the afterbody so as to provide a sufficiently strong surrounding portion for the pocket in which the explosion takes place. The detonator for the explosive is also located on the cover and is carried away with the cover during separation. The seal is preferably located at the longitudinal end of the tongue and has a chevron cross section.

  12. Non-ferromagnetic overburden casing

    DOE Patents [OSTI]

    Vinegar, Harold J.; Harris, Christopher Kelvin; Mason, Stanley Leroy

    2010-09-14

    Systems, methods, and heaters for treating a subsurface formation are described herein. At least one system for electrically insulating an overburden portion of a heater wellbore is described. The system may include a heater wellbore located in a subsurface formation and an electrically insulating casing located in the overburden portion of the heater wellbore. The casing may include at least one non-ferromagnetic material such that ferromagnetic effects are inhibited in the casing.

  13. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reviews » FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background Materials FAQ for Case Study Authors BER Requirements Review 2015 ASCR Requirements Review 2015 Previous Reviews Requirements Review Reports Case Studies Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems:

  14. FAQ for Case Study Authors

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Reviews FAQ for Case Study Authors Science Engagement Move your data Programs & Workshops Science Requirements Reviews Network Requirements Reviews Documents and Background...

  15. Documentation and control over economic regulatory adminstration field cases

    SciTech Connect (OSTI)

    Not Available

    1988-08-01

    This review was performed to evaluate the Economic Regulatory Administrations's (ERA) documentation of and control over cases involving alleged petroleum pricing violations. In response to the oil embargo and price increase, the Congress passed the Emergency Petroleum Allocation Act of 1973 (Act). The Government assured compliance by investigating petroleum pricing violations, recovering overcharges, and making restitution to injured parties. Between August 1973 and January 1981, ERA and predecessor Federal agencies established and enforced regulations controlling the allocation and pricing of crude oil and refined petroleum products. The purpose of this review was to determine whether adequate internal controls were in place to assure that overcharge cases were being resolved in accordance with established guidelines. Specific objectives were to determine whether ERA's internal controls assured that (1) the bases for resolving cases were documented, (2) case settlements were approved by more than one person, and (3) cases were tracked until all overcharge issues were resolved.

  16. Elizabeth Case | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case About Us Elizabeth Case - Guest Blogger, Cycle for Science Most Recent Rain or Shine: We Cycle for Science July 2 Mountains, and Teachers, and a Bear, Oh My! June 2 Sol-Cycle: Biking Across America for Science Education May 1

  17. Analysis of Restricted Natural Gas Supply Cases

    Reports and Publications (EIA)

    2004-01-01

    The four cases examined in this study have progressively greater impacts on overall natural gas consumption, prices, and supply. Compared to the Annual Energy Outlook 2004 reference case, the no Alaska pipeline case has the least impact; the low liquefied natural gas case has more impact; the low unconventional gas recovery case has even more impact; and the combined case has the most impact.

  18. Federal Utility Energy Service Contract Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Federal Utility Energy Service Contract Case Studies Federal Utility Energy Service Contract Case Studies These case studies feature examples of federal projects made possible by the use of utility energy service contracts (UESCs). Photo of the Coast Guard's Multi-Site UESC project. U.S. Coast Guard: This 12-site project with 21 energy-conservation measures reduced electricity consumption by 19.1%, water consumption by 64.2%, and natural gas consumption by 21.1%. Photo of Patrick Air Force Base.

  19. Interactive savings calculations for RCS measures, six case studies

    SciTech Connect (OSTI)

    Stovall, T.K.

    1983-11-01

    Many Residential Conservation Service (RCS) audits are based, in whole or in part, on the RCS Model Audit. This audit calculates the savings for each measure independently, that is, as if no other conservation actions were taken. This method overestimates the total savings due to a group of measures, and an explanatory warning is given to the customer. Presenting interactive results to consumers would increase the perceived credibility of the audit results by eliminating the need for the warning about uncalculated interactive effects. An increased level of credibility would hopefully lead to an increased level of conservation actions based on the audit results. Because many of the existing RCS audits are based on the RCS Model Audit, six case studies were produced to show that the Model Audit algorithms can be used to produce interactive savings estimates. These six Model Audit case studies, as well as two Computerized Instrumented Residential Audit cases, are presented along with a discussion of the calculation methods used.

  20. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    C Low Economic Growth case projections This page inTenTionally lefT blank 47 U.S. Energy Information Administration | International Energy Outlook 2016 Low Economic Growth case projections Table C1. World total primary energy consumption by region, Low Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 123.3 123.9 124.7 126.3 128.8 0.3 United States a 96.8 94.4 98.7

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    D High Oil Price case projections This page inTenTionally lefT blank 51 U.S. Energy Information Administration | International Energy Outlook 2016 High Oil Price case projections Table D1. World total primary energy consumption by region, High Oil Price case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 125.3 127.9 130.8 135.5 142.1 0.7 United States a 96.8 94.4 100.8 102.2 103.3

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    I Reference case projections for natural gas production This page inTenTionally lefT blank 121 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for natural gas production Table I1. World total natural gas production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 31.8 35.7 38.6 42.1 44.6 47.3 1.4 United States a 24.0 28.7

  3. Alternative Fuels Data Center: Case Studies

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Case Studies Printable Version Share this resource Send a link to Alternative Fuels Data Center: Case Studies to someone by E-mail Share Alternative Fuels Data Center: Case Studies on Facebook Tweet about Alternative Fuels Data Center: Case Studies on Twitter Bookmark Alternative Fuels Data Center: Case Studies on Google Bookmark Alternative Fuels Data Center: Case Studies on Delicious Rank Alternative Fuels Data Center: Case Studies on Digg Find More places to share Alternative Fuels Data

  4. Appendix A. Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    by region and country, Low Oil Price case, 2009-40 (million barrels per day) Region History Projections Average annual percent change, 2010-40 2009 2010 2011 2020 2025 2030...

  5. Appendix A. Reference case projections

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    by region and end-use sector, High Oil Price case, 2010-40 (quadrillion Btu) Region History Projections Average annual percent change, 2010-40 2010 2020 2025 2030 2035 2040 OECD...

  6. OHA Misc Cases Archive File

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our Misc decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of the...

  7. OHA Whistleblower Cases Archive File

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our Whistleblower decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark...

  8. OHA Security Cases Archive File

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our Security decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of...

  9. OHA EIA CASES ARCHIVE FILE

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our EIA decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of the...

  10. OHA FOIA Cases Archive File

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our FOIA decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark section of the...

  11. BerkeleyGW Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BerkeleyGW Case Study BerkeleyGW Case Study Code Description and Science Problem BerkeleyGW is a Materials Science application for calculating the excited state properties of materials such as band gaps, band structures, absoprtion spectroscopy, photoemission spectroscopy and more. It requires as input the Kohn-Sham orbitals and energies from a DFT code like Quantum ESPRESSO, PARATEC, PARSEC etc. Like such DFT codes, it is heavily depedent on FFTs, Dense Linear algebra and tensor contraction

  12. EIA Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    EIA Cases EIA Cases RSS February 14, 2011 TEE-0073 - In the Matter of Cole Distributing, Inc. On December 13, 2010, Cole Distributing, Inc. (Cole) filed an Application for Exception with the Office of Hearings and Appeals (OHA) of the Department of Energy (DOE). The firm requests that it be permanently relieved of the requirement to prepare and file the Energy Information Administration (EIA) Form EIA-782B, entitled "Resellers'/Retailers' Monthly Petroleum Product Sales Report." As

  13. Comprehensive Energy Program at Patrick Air Force Base Set to...

    Office of Environmental Management (EM)

    Download the Patrick Air Force Base case study. (709.94 KB) More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project Overview: NASA Ames Research ...

  14. EPICS BASE

    Energy Science and Technology Software Center (OSTI)

    002230MLTPL00 Experimental Physics and Industrial Control System BASE  http://www.aps.anl.gov/epics 

  15. Technology Deployment Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Technology Deployment Case Studies Technology Deployment Case Studies Technology Deployment Case Studies Find efficient technologies and products for federal applications on the Federal Energy Management Program website. View All Maps Addthis

  16. Y-12 and the Jack Case Center

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    February 21, 2014, Patrick Case, Jack Case's youngest son, called me. He was at the New Hope Center and wanted to visit the Jack Case Center. I explained that it would have to wait...

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    E Low Oil Price case projections This page inTenTionally lefT blank 57 U.S. Energy Information Administration | International Energy Outlook 2016 Low Oil Price case projections Table E1. World total primary energy consumption by region, Low Oil Price case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-s40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 126.5 129.2 131.8 135.0 138.9 0.6 United States a 96.8 94.4 101.2 102.7 103.6 104.6

  18. Case Western University | Open Energy Information

    Open Energy Info (EERE)

    University Jump to: navigation, search Name Case Western University Facility Case Western University Sector Wind energy Facility Type Small Scale Wind Facility Status In Service...

  19. Renewable Energy Case Studies | Open Energy Information

    Open Energy Info (EERE)

    Case Studies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Case Studies AgencyCompany Organization: National Renewable Energy Laboratory Sector:...

  20. CASE Design/Remodeling | Open Energy Information

    Open Energy Info (EERE)

    DesignRemodeling Jump to: navigation, search Name: CASE DesignRemodeling Place: Bethesda, MD Website: www.casedesignremodeling.com References: CASE DesignRemodeling1...

  1. Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Transcritical Carbon Dioxide Supermarket Refrigeration Systems Case Study: Transcritical Carbon Dioxide Supermarket Refrigeration Systems This case study documents one year of ...

  2. Better Buildings Residential Network Case Study: Partnerships...

    Energy Savers [EERE]

    Better Buildings Residential Network Case Study: Partnerships Better Buildings Residential Network Case Study: Partnerships, from the U.S. Department of Energy's Office of Energy ...

  3. QPhiX Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    QPhiX Case Study QPhiX Case Study June 20, 2016 Background QPhiX [1,2,3] is a library optimized for Intel(R) manycore architectures and provides sparse solvers and slash kernels for Lattice QCD calculations. It supports the Wilson dslash operator with and without clover term as well as Conjugate Gradient [4] and BiCGStab [5] solvers. The main task for QPhiX is to solve the sparse linear system dirac equation where the Dslash kernel is defined by wilson dslash Here, U are complex, special

  4. Whistleblower Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Whistleblower Cases Whistleblower Cases RSS July 14, 2016 WBU-16-0006 - In the Matter Dr. Shou-Yuan Zhang On July 14, 2016, OHA granted an Appeal involving a Complaint filed by Dr. Shou-Yuan Zhang against Brookhaven Science Associates (BSA) under the DOE's Contractor Employee Protection Program, 10 CFR Part 708. In his Complaint, Dr. Zhang alleged that in an email to a BSA official, he reported research misconduct and that, in response, BSA transferred him to a new position. The DOE's Brookhaven

  5. FOIA Cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    FOIA Cases FOIA Cases RSS July 28, 2016 FIA-16-0039 - In the Matter of Michael Ravnitzky On July 28, 2016, OHA granted in part a FOIA Appeal filed by Michael Ravinitzky from a determination issued by the Office of Scientific and Technical Information (OSTI) of the Department of Energy. In the Appeal, the Appellant challenged OSTI's decision to withhold responsive records under Exemptions 3 and 4 of the FOIA. Reviewing only the unclassified portion of the responsive records, OHA found that OSTI's

  6. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G1. World petroleum and other liquids production by region and country, Reference case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC a 36.0 37.4 39.2 41.4 44.6 48.7 52.2 1.2 Middle East 26.2 26.6 29.8

  7. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G3. International other liquid fuels a production by region and country, Reference case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 3.7 3.8 4.3 4.6 4.8 5.2 5.6 1.3 Natural gas plant liquids 3.6 3.7

  8. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G7. World petroleum and other liquids production by region and country, Low Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC a 36.0 37.4 43.2 45.6 49.9 54.7 59.4 1.7 Middle East 26.2 26.6 31.1

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G9. World other liquid fuels a production by region and country, Low Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 3.7 3.8 4.3 4.5 4.5 4.9 4.8 0.8 Natural gas plant liquids 3.6 3.7 4.0

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A14. World population by region, Reference case, 2011-40 (millions) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 484 489 523 544 564 581 597 0.7 United States a 312 315 334 347 359 370 380 0.7 Canada 34 35 38 39 41 43 44 0.8 Mexico and Chile 137 139 151 158 164 169 173 0.8 OECD Europe 548 550 565 571 576 579 581

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A8. World nuclear energy consumption by region, Reference case, 2011-40 (billion kilowatthours) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 888 867 902 891 901 900 924 0.2 United States a 790 769 804 808 808 812 833 0.3 Canada 88 89 86 72 72 67 62 -1.3 Mexico and Chile 9 8 12 12 20 20 29 4.5 OECD Europe 861 837

  12. Integrating Nuclear Energy to Oilfield Operations – Two Case Studies

    SciTech Connect (OSTI)

    Eric P. Robertson; Lee O. Nelson; Michael G. McKellar; Anastasia M. Gandrik; Mike W. Patterson

    2011-11-01

    Fossil fuel resources that require large energy inputs for extraction, such as the Canadian oil sands and the Green River oil shale resource in the western USA, could benefit from the use of nuclear power instead of power generated by natural gas combustion. This paper discusses the technical and economic aspects of integrating nuclear energy with oil sands operations and the development of oil shale resources. A high temperature gas reactor (HTGR) that produces heat in the form of high pressure steam (no electricity production) was selected as the nuclear power source for both fossil fuel resources. Both cases were based on 50,000 bbl/day output. The oil sands case was a steam-assisted, gravity-drainage (SAGD) operation located in the Canadian oil sands belt. The oil shale development was an in-situ oil shale retorting operation located in western Colorado, USA. The technical feasibility of the integrating nuclear power was assessed. The economic feasibility of each case was evaluated using a discounted cash flow, rate of return analysis. Integrating an HTGR to both the SAGD oil sands operation and the oil shale development was found to be technically feasible for both cases. In the oil sands case, integrating an HTGR eliminated natural gas combustion and associated CO2 emissions, although there were still some emissions associated with imported electrical power. In the in situ oil shale case, integrating an HTGR reduced CO2 emissions by 88% and increased natural gas production by 100%. Economic viabilities of both nuclear integrated cases were poorer than the non-nuclear-integrated cases when CO2 emissions were not taxed. However, taxing the CO2 emissions had a significant effect on the economics of the non-nuclear base cases, bringing them in line with the economics of the nuclear-integrated cases. As we move toward limiting CO2 emissions, integrating non-CO2-emitting energy sources to the development of energy-intense fossil fuel resources is becoming

  13. Better Buildings Case Competition in the News | Department of...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Better Buildings Case Competition in the News Better Buildings Case Competition in the News Better Buildings Case Competition in the News Better Buildings Case Competition in the ...

  14. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A1. World total primary energy consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 125.7 128.1 130.7 133.8 138.1 0.6 United States a 96.8 94.4 100.8 102.0 102.9 103.8 105.7 0.4 Canada 14.5 14.5 15.1 15.6 16.3 17.1 18.1 0.8 Mexico and Chile 9.3

  15. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    International Energy Outlook 2016 Reference case projections Table A4. World gross domestic product (GDP) by region expressed in market exchange rates, Reference case, 2011-40 (billion 2010 dollars) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 18,006 18,440 22,566 25,585 28,757 32,166 36,120 2.4 United States a 15,021 15,369 18,801 21,295 23,894 26,659 29,898 2.4 Canada 1,662 1,694 2,024 2,240 2,470 2,730 3,012 2.1 Mexico

  16. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A6. World natural gas consumption by region, Reference case, 2011-40 (trillion cubic feet) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 30.8 31.8 32.8 34.3 36.5 38.2 40.1 0.8 United States a 24.5 25.5 26.1 26.9 28.1 28.8 29.7 0.5 Canada 3.7 3.7 3.9 4.2 4.7 5.2 5.6 1.5 Mexico and Chile 2.6 2.6 2.8 3.2 3.6 4.2 4.8

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Low Oil Price case projections Table E1. World total primary energy consumption by region, Low Oil Price case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-s40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 126.5 129.2 131.8 135.0 138.9 0.6 United States a 96.8 94.4 101.2 102.7 103.6 104.6 106.1 0.4 Canada 14.5 14.5 15.3 15.8 16.5 17.4 18.3 0.8 Mexico and

  18. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Low Oil Price case projections Table E3. World liquids consumption by region, Low Oil Price case, 2011-40 (million barrels per day) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 23.6 23.2 24.9 25.0 25.2 25.5 26.1 0.4 United States a 18.9 18.5 20.0 20.1 20.1 20.2 20.4 0.4 Canada 2.3 2.4 2.4 2.4 2.5 2.6 2.6 0.4 Mexico and Chile 2.4 2.4 2.5 2.5 2.6

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Low Economic Growth case projections Table C1. World total primary energy consumption by region, Low Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 123.3 123.9 124.7 126.3 128.8 0.3 United States a 96.8 94.4 98.7 98.1 97.5 97.4 98.0 0.1 Canada 14.5 14.5 15.0 15.4 15.9 16.6 17.3 0.6 Mexico

  20. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Projections of petroleum and other liquid fuels production in three cases Table G5. World crude oil a production by region and country, High Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 32.2 33.4 30.7 30.9 32.4 33.4 34.4 0.1 Middle East 22.9 23.2 22.7 23.0 24.4 25.2

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for natural gas production Table I1. World total natural gas production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 31.8 35.7 38.6 42.1 44.6 47.3 1.4 United States a 24.0 28.7 30.4 32.9 34.0 35.3 1.4 Canada 6.1 5.8 6.6 7.2 7.9 8.6 1.2 Mexico 1.7 1.2 1.5 2.0 2.6 3.3

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for natural gas production Table I3. World other natural gas production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 12.0 9.8 9.5 10.7 10.3 10.3 -0.5 United States a 7.5 6.6 6.5 7.8 7.5 7.5 0.0 Canada 2.8 2.0 1.8 1.7 1.6 1.5 -2.2 Mexico 1.7 1.2 1.2 1.2 1.2 1.2 -1.2

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections Table A10. World carbon dioxide emissions by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6,558 6,343 6,569 6,620 6,675 6,769 6,887 0.3 United States a 5,483 5,272 5,499 5,511 5,514 5,521 5,549 0.2 Canada 562 563 557 577 587 621 647 0.5 Mexico and

  4. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    Reference case projections Table A12. World carbon dioxide emissions from natural gas use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,666 1,715 1,766 1,849 1,965 2,063 2,167 0.8 United States a 1,305 1,363 1,394 1,432 1,497 1,538 1,586 0.5 Canada 205 205 213 234 261 287 310 1.5 Mexico and Chile 156 147 158 184 207 238 271 2.2 OECD Europe 1,016 970

  5. Cell casing and grommet therefore

    SciTech Connect (OSTI)

    Law, G.H.; Meyler-warlow, I.

    1980-11-11

    A grommet has a central opening and a peripheral groove defining spaced first and second peripheral lips, the opening aligned with the first peripheral lip is of increased width so that the lip may flex inwardly to allow insertion over a cell terminal post after assembly. The first peripheral lip has an inclined surface which cooperates with an inclined surface on the cell casing to facilitate insertion of the grommet. An electric cell including such a grommet is also disclosed.

  6. Orange and Rockland Case Study

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    0 2012 Orange and Rockland Case Study 1 Voltage Control Device A "Model-Centric" Approach to Smarter Electric Distribution Systems Orange and Rockland Utilities (ORU), is an investor-owned utility and a subsidiary of Consolidated Edison Incorporated (Con Edison), and is located in suburban New York, New Jersey, and Pennsylvania, west of New York City. ORU is a key participant in Con Edison's $272 million Smart Grid Investment Grant (SGIG) project to modernize electric distribution

  7. DOE Zero Energy Ready Home Case Study: Palo Duro Homes, Albuquerque, NM

    Broader source: Energy.gov [DOE]

    Case study of a New Mexico-based home builder who has built more DOE Zero Energy Ready certified homes than any builder in the nation. One example home achieved a HERS score of HERS 55 without PV...

  8. ARM - Field Campaign - CASES Data Analysis

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govCampaignsCASES Data Analysis Comments? We would love to hear from you! Send us a note below or call us at 1-888-ARM-DATA. Send Campaign : CASES Data Analysis 2004.07.01 - 2009.06.30 Lead Scientist : Margaret LeMone Abstract CASES Data Analysis: Potential Benefits Diurnal variation of the Atmospheric Boundary Layer. Taken together, the two Cooperative Atmosphere Surface Exchange Study (CASES) field programs, CASES-97 (morning and evening) and CASES-99 (evening, night, morning) provide a robust

  9. FINAL SIMULATION RESULTS FOR DEMONSTRATION CASE 1 AND 2

    SciTech Connect (OSTI)

    David Sloan; Woodrow Fiveland

    2003-10-15

    The goal of this DOE Vision-21 project work scope was to develop an integrated suite of software tools that could be used to simulate and visualize advanced plant concepts. Existing process simulation software did not meet the DOE's objective of ''virtual simulation'' which was needed to evaluate complex cycles. The overall intent of the DOE was to improve predictive tools for cycle analysis, and to improve the component models that are used in turn to simulate equipment in the cycle. Advanced component models are available; however, a generic coupling capability that would link the advanced component models to the cycle simulation software remained to be developed. In the current project, the coupling of the cycle analysis and cycle component simulation software was based on an existing suite of programs. The challenge was to develop a general-purpose software and communications link between the cycle analysis software Aspen Plus{reg_sign} (marketed by Aspen Technology, Inc.), and specialized component modeling packages, as exemplified by industrial proprietary codes (utilized by ALSTOM Power Inc.) and the FLUENT{reg_sign} computational fluid dynamics (CFD) code (provided by Fluent Inc). A software interface and controller, based on an open CAPE-OPEN standard, has been developed and extensively tested. Various test runs and demonstration cases have been utilized to confirm the viability and reliability of the software. ALSTOM Power was tasked with the responsibility to select and run two demonstration cases to test the software--(1) a conventional steam cycle (designated as Demonstration Case 1), and (2) a combined cycle test case (designated as Demonstration Case 2). Demonstration Case 1 is a 30 MWe coal-fired power plant for municipal electricity generation, while Demonstration Case 2 is a 270 MWe, natural gas-fired, combined cycle power plant. Sufficient data was available from the operation of both power plants to complete the cycle configurations. Three runs

  10. Analysis of design tradeoffs for diplay case evaporators

    SciTech Connect (OSTI)

    Bullard, CLARK

    2004-08-11

    A model for simulating a display case evaporator under frosting conditions has been developed, using a quasi-steady and finite-volume approach and a Newton-Raphson based solution algorithm. It is capable of simulating evaporators with multiple modules having different geometries, e.g. tube and fin thicknesses and pitch. The model was validated against data taken at two-minute intervals from a well-instrumented medium-temperature vertical display case, for two evaporators having very different configurations. The data from these experiments provided both the input data for the model and also the data to compare the modeling results. The validated model has been used to generate some general guidelines for coil design. Effects of various geometrical parameters were quantified, and compressor performance data were used to express the results in terms of total power consumption. Using these general guidelines, a new prototype evaporator was designed for the subject display case, keeping in mind the current packaging restrictions, tube and fin availabilities. It is an optimum coil for the given external load conditions. Subsequently, the validated model was used in a more extensive analysis to design prototype coils with some of the current tube and fin spacing restrictions removed. A new microchannel based suction line heat exchanger was installed in the display case system. The performance of this suction line heat exchanger is reported.

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Kaya Identity factor projections Table J3. World gross domestic product (GDP) per capita by region expressed in purchasing power parity, Reference case, 2011-40 (2010 dollars per person) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 38,441 39,055 44,716 48,842 53,114 57,747 63,278 1.7 United States a 48,094 48,865 56,285 61,453 66,639 72,107

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H1. World total installed generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,258 1,278 1,330 1,371 1,436 1,517 1,622 0.9 United States a 1,046 1,063 1,079 1,091 1,133 1,187 1,261 0.6 Canada 133 135

  13. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H11. World installed other renewable generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 41 42 45 49 52 57 59 1.2 United States a 36 37 39 39 39 40 41 0.4 Canada 4 4 5 8 12 15 16 4.9 Mexico and Chile 1 1

  14. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H13. World net liquids-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 88 88 66 37 36 35 35 -3.3 United States a 30 23 18 18 18 18 18 -0.9 Canada 6 7 6 6 6 5 5 -1.0 Mexico and

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H15. World net coal-fred electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,857 1,630 1,808 1,820 1,786 1,778 1,769 0.3 United States a 1,733 1,514 1,709 1,724 1,713 1,704 1,702 0.4

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    Reference case projections for electricity capacity and generation by fuel Table H17. World net hydroelectric and other renewable electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 1,004 987 1,278 1,376 1,472 1,598 1,763 2.1 United States a 535 520 704 741 781 848 934 2.1 Canada 398 397 459 491 524 557 606 1.5 Mexico and Chile 71 69 115 144

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H19. World net wind-powered electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 142 156 295 327 354 404 460 3.9 United States a 120 141 232 235 245 278 319 3.0 Canada 20 11 39 46 53 60 66

  18. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H21. World net solar electricity generation by region and country, 2011-40 (billion kilowatthours) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6 12 57 65 79 96 120 8.7 United States a 6 11 51 59 71 88 110 8.5 Canada 0 0 3 3 4 5 5 10.3 Mexico and Chile 0 0 3

  19. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    9 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H3. World installed natural-gas-fred generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 410 420 455 488 534 584 640 1.5 United States a 358 367 393 409 444 481 525 1.3 Canada 20 20 25 30 36 41 46 3.0

  20. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    1 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H5. World installed nuclear generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 115 117 115 113 115 114 118 0.0 United States a 102 102 101 101 102 102 105 0.1 Canada 13 14 12 10 10 10 9 -1.5 Mexico and

  1. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    3 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H7. World installed hydroelectric generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 171 171 183 187 192 198 210 0.7 United States a 78 78 80 80 80 80 80 0.1 Canada 75 75 83 85 88 90 99 1.0 Mexico and

  2. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    5 U.S. Energy Information Administration | International Energy Outlook 2016 Reference case projections for electricity capacity and generation by fuel Table H9. World installed geothermal generating capacity by region and country, 2011-40 (gigawatts) Region/country History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 3 3 5 7 9 10 11 4.3 United States a 3 3 4 5 7 8 9 4.6 Canada 0 0 0 0 0 0 0 - Mexico and Chile 1 1 1 1 2 2 2 3.3 OECD

  3. Hydrogen Production: Fundamentals and Case Study Summaries (Presentation)

    SciTech Connect (OSTI)

    Harrison, K.; Remick, R.; Hoskin, A.; Martin, G.

    2010-05-19

    This presentation summarizes hydrogen production fundamentals and case studies, including hydrogen to wind case studies.

  4. Generic Argillite/Shale Disposal Reference Case

    SciTech Connect (OSTI)

    Zheng, Liange; Colon, Carlos Jové; Bianchi, Marco; Birkholzer, Jens

    2014-08-08

    Radioactive waste disposal in a deep subsurface repository hosted in clay/shale/argillite is a subject of widespread interest given the desirable isolation properties, geochemically reduced conditions, and widespread geologic occurrence of this rock type (Hansen 2010; Bianchi et al. 2013). Bianchi et al. (2013) provides a description of diffusion in a clay-hosted repository based on single-phase flow and full saturation using parametric data from documented studies in Europe (e.g., ANDRA 2005). The predominance of diffusive transport and sorption phenomena in this clay media are key attributes to impede radionuclide mobility making clay rock formations target sites for disposal of high-level radioactive waste. The reports by Hansen et al. (2010) and those from numerous studies in clay-hosted underground research laboratories (URLs) in Belgium, France and Switzerland outline the extensive scientific knowledge obtained to assess long-term clay/shale/argillite repository isolation performance of nuclear waste. In the past several years under the UFDC, various kinds of models have been developed for argillite repository to demonstrate the model capability, understand the spatial and temporal alteration of the repository, and evaluate different scenarios. These models include the coupled Thermal-Hydrological-Mechanical (THM) and Thermal-Hydrological-Mechanical-Chemical (THMC) models (e.g. Liu et al. 2013; Rutqvist et al. 2014a, Zheng et al. 2014a) that focus on THMC processes in the Engineered Barrier System (EBS) bentonite and argillite host hock, the large scale hydrogeologic model (Bianchi et al. 2014) that investigates the hydraulic connection between an emplacement drift and surrounding hydrogeological units, and Disposal Systems Evaluation Framework (DSEF) models (Greenberg et al. 2013) that evaluate thermal evolution in the host rock approximated as a thermal conduction process to facilitate the analysis of design options. However, the assumptions and the

  5. Patent and copyright cases | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Patent and copyright cases Patent and copyright cases (a) Whenever an invention described in and covered by a patent of the United States is used or manufactured by or for the ...

  6. Fuel Cell Case Study | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study Fuel Cell Case Study Presented at the Clean Energy States Alliance and U.S. Department of Energy Webinar: Fuel Cells for Supermarkets, April 4, 2011. PDF icon ...

  7. Annual Energy Outlook 2011 Reference Case

    Annual Energy Outlook [U.S. Energy Information Administration (EIA)]

    ... Case CO 2 Fee 10ton CO 2 Fee 25ton Coal plant retirements 8 gigawatts Source: EIA, ... gas combined-cycle plants to coal-fired steam turbines in five cases, 2008-2040 9 ...

  8. Are shorted pipeline casings a problem

    SciTech Connect (OSTI)

    Gibson, W.F. )

    1994-11-01

    The pipeline industry has many road and railroad crossings with casings which have been in service for more than 50 years without exhibiting any major problems, regardless of whether the casing is shorted to or isolated from the carrier pipe. The use of smart pigging and continual visual inspection when retrieving a cased pipeline segment have shown that whether shorted or isolated, casings have no significant bearing on the presence or absence of corrosion on the carrier pipe.

  9. New casing for salt problems ''hot item''

    SciTech Connect (OSTI)

    Rountree, R.

    1983-10-01

    Operators in the Williston Basin indicate interest in the high performance casing, which is designed to resist collapse. Lone Star Steel Co. offers custom designed, high performance casing to withstand high pressures and H/sub 2/S encroachment. A number of companies will continue to evaluate the results of the casing programs that employ high performance pipe with considerable interest.

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    7 U.S. Energy Information Administration | International Energy Outlook 2016 Kaya Identity factor projections Table J1. World carbon dioxide intensity of energy use by region, Reference case, 2011-40 (metric tons per billion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 53.6 53.0 52.3 51.7 51.1 50.6 49.9 -0.2 United States a 55.7 55.0 54.5 54.0 53.6 53.2 52.5 -0.2 Canada 38.8 38.9 37.0 37.0 36.1 36.2 35.8 -0.3 Mexico

  11. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    8 Appendix A Table A3. World gross domestic product (GDP) by region expressed in purchasing power parity, Reference case, 2011-40 (billion 2010 dollars) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 18,616 19,080 23,390 26,577 29,942 33,569 37,770 2.5 United States a 15,021 15,369 18,801 21,295 23,894 26,659 29,898 2.4 Canada 1,396 1,422 1,700 1,881 2,074 2,293 2,529 2.1 Mexico and Chile 2,200 2,288 2,890 3,400 3,974 4,618

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    58 Appendix E Table E2. World gross domestic product (GDP) by region expressed in purchasing power parity, Low Oil Price case, 2011-40 (billion 2010 dollars) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 18,616 19,080 23,330 26,574 29,998 33,626 37,702 2.5 United States a 15,021 15,369 18,742 21,299 23,963 26,735 29,885 2.4 Canada 1,396 1,422 1,700 1,881 2,073 2,290 2,521 2.1 Mexico and Chile 2,200 2,288 2,889 3,394 3,962

  13. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix C Table C2. World gross domestic product (GDP) by region expressed in purchasing power parity, Low Economic Growth case, 2011-40 (billion 2010 dollars) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 18,616 19,080 22,285 24,599 27,041 29,850 33,088 2.0 United States a 15,021 15,369 17,747 19,441 21,224 23,305 25,763 1.9 Canada 1,396 1,422 1,682 1,841 2,005 2,186 2,375 1.8 Mexico and Chile 2,200 2,288 2,856 3,317

  14. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix G Table G4. World petroleum and other liquids production by region and country, High Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC a 36.0 37.4 35.3 35.8 37.7 39.3 40.4 0.3 Middle East 26.2 26.6 26.5 27.0 28.6 29.8 30.6 0.5 North Africa 2.4 3.3 2.1 1.9 2.1 2.2 2.3 -1.4 West Africa 4.3 4.3 4.0 4.0 4.0 4.0 4.0 -0.2 South America 3.2 3.2

  15. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    0 Appendix G Table G6. World other liquid fuels a production by region and country, High Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 3.7 3.8 4.6 4.9 5.3 5.8 5.9 1.6 Natural gas plant liquids 3.6 3.7 4.3 4.6 4.9 5.3 5.3 1.3 Liquids from renewable sources c 0.0 0.0 0.0 0.0 0.0 0.0 0.0 - Liquids from coal 0.0 0.0 0.0 0.0 0.0 0.0 0.0 - Liquids

  16. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    6 Appendix A Table A11. World carbon dioxide emissions from liquids use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,881 2,838 2,861 2,812 2,785 2,794 2,812 0.0 United States a 2,291 2,240 2,269 2,227 2,182 2,163 2,147 -0.2 Canada 289 291 291 289 290 295 304 0.2 Mexico and Chile 301 307 301 296 313 335 361 0.6 OECD Europe 1,969 1,903 1,823 1,804

  17. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix A Table A13. World carbon dioxide emissions from coal use by region, Reference case, 2011-40 (million metric tons carbon dioxide) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 2,000 1,779 1,931 1,947 1,912 1,901 1,896 0.2 United States a 1,876 1,657 1,824 1,840 1,822 1,808 1,804 0.3 Canada 68 68 53 54 36 38 33 -2.5 Mexico and Chile 56 54 53 53 54 55 58 0.3 OECD Europe 1,208 1,251 1,228 1,244 1,219 1,195 1,178

  18. An Updated Annual Energy Outlook 2009 Reference Case Reflecting Provisions of the American Recovery and Reinvestment Act and Recent Changes in the Economic Outlook

    Reports and Publications (EIA)

    2009-01-01

    This report updates the Reference Case presented in the Annual Energy Outlook 2009 based on recently enacted legislation and the changing macroeconomic environment.

  19. Case Study - The Challenge: Improving Sewage Pump System Performance...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Case Study - The Challenge: Improving Sewage Pump System Performance Case Study - The Challenge: Improving Sewage Pump System Performance This case study looks at how Trumbull, ...

  20. Water Use Reduction Case Studies | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Facilities Water Use Reduction Water Use Reduction Case Studies Water Use Reduction Case Studies These case studies offer examples of water use reduction projects implemented...

  1. Federal Utility Energy Service Contract Case Studies | Department...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Energy Service Contract Case Studies Federal Utility Energy Service Contract Case Studies These case studies feature examples of federal projects made possible by the use of ...

  2. WP-07 Power Rate Case (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Meetings & Workshops Rate Case Parties Web Site WP-07 Supplemental Rate Case ASC Methodology Adjustments (2007-2009) Adjustments (2002-2006) Previous Rate Cases Financial...

  3. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    8 Appendix J Table J2. World energy intensity by region, Reference case, 2011-40 (thousand Btu per 2010 dollar of GDP) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 6.5 6.2 5.4 4.8 4.4 4.0 3.7 -1.9 United States a 6.4 6.1 5.4 4.8 4.3 3.9 3.5 -2.0 Canada 10.4 10.2 8.9 8.3 7.8 7.5 7.1 -1.3 Mexico and Chile 4.2 4.0 3.4 3.1 2.9 2.8 2.7 -1.4 OECD Europe 4.4 4.4 3.9 3.7 3.5 3.3 3.2 -1.1 OECD Asia 5.7 5.5 5.4 5.3 5.1 4.9 4.8 -0.5

  4. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    6 Appendix A Table A2. World total energy consumption by region and fuel, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas Liquids 45.3 44.6 46.4 46.1 46.0 46.2 46.7 0.2 Natural gas 31.8 32.8 33.9 35.5 37.7 39.5 41.4 0.8 Coal 21.0 18.7 20.3 20.5 20.1 20.0 20.0 0.2 Nuclear 9.4 9.2 9.5 9.4 9.5 9.5 9.7 0.2 Other 13.1 12.9 15.6 16.6 17.5 18.6 20.3 1.6 Total 120.6 118.1 125.7 128.1 130.7

  5. Appendix A: Reference case projections

    U.S. Energy Information Administration (EIA) Indexed Site

    30 Appendix A Table A5. World liquids consumption by region, Reference case, 2011-40 (million barrels per day) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 23.6 23.2 24.4 24.4 24.3 24.4 24.6 0.2 United States a 18.9 18.5 19.6 19.6 19.4 19.3 19.3 0.2 Canada 2.3 2.4 2.4 2.4 2.4 2.4 2.5 0.2 Mexico and Chile 2.4 2.4 2.4 2.4 2.5 2.7 2.9 0.6 OECD Europe 14.5 14.1 13.7 13.6 13.7 13.8 14.0 0.0 OECD Asia 7.9 8.2 7.7 7.5 7.5 7.5

  6. BoxLib Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    287 2.246 2.203 2.183 2.231 2.265 2003-2016 All Grades - Reformulated Areas 2.287 2.246 2.203 2.183 2.231 2.265 2003-2016 Regular 2.178 2.138 2.092 2.064 2.130 2.160 2003-2016 Reformulated Areas 2.178 2.138 2.092 2.064 2.130 2.160 2003-2016 Midgrade 2.437 2.388 2.357 2.355 2.356 2.404 2003-2016 Reformulated Areas 2.437 2.388 2.357 2.355 2.356 2.404 2003-2016 Premium 2.626 2.585 2.553 2.548 2.555 2.597 2003-2016 Reformulated Areas 2.626 2.585 2.553 2.548 2.555 2.59

    BoxLib Case Study BoxLib

  7. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    86 Appendix G Table G2. World crude oil a production by region and country, Reference case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 32.2 33.4 34.9 36.8 39.7 43.4 46.6 1.2 Middle East 22.9 23.2 26.2 27.9 30.3 33.4 35.6 1.5 North Africa 2.0 2.9 1.6 1.7 1.8 2.0 2.2 -1.0 West Africa 4.3 4.3 4.3 4.3 4.5 4.7 5.1 0.6 South America 3.0 3.0 2.8 2.9 3.1 3.4 3.6

  8. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix G Table G8. World crude oil a production by region and country, Low Oil Price case, 2011-40 (million barrels per day, unless otherwise noted) Region/country History (estimates) Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OPEC b 32.2 33.4 38.9 41.1 45.3 49.7 54.5 1.8 Middle East 22.9 23.2 27.8 28.9 32.2 35.6 38.5 1.8 North Africa 2.0 2.9 2.9 3.0 3.0 3.0 3.3 0.5 West Africa 4.3 4.3 4.4 4.5 4.9 5.5 6.3 1.3 South America 3.0 3.0 3.8 4.7 5.1 5.6

  9. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix I Table I2. World tight gas, shale gas and coalbed methane production by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 19.8 26.0 29.0 31.4 34.3 37.0 2.3 United States a 16.6 22.1 23.9 25.1 26.5 27.8 1.9 Canada 3.3 3.8 4.9 5.5 6.3 7.0 2.8 Mexico 0.0 0.1 0.3 0.8 1.4 2.2 - Chile 0.0 0.0 0.0 0.0 0.0 0.0 - OECD Europe 0.0 0.5 1.7 3.3 4.6 5.5 21.8 North Europe 0.0 0.5

  10. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    4 Appendix I Table I4. World net trade in natural gas by region, Reference case, 2012-40 (trillion cubic feet) Region/country Projections Average annual percent change, 2012-40 2012 2020 2025 2030 2035 2040 OECD OECD Americas 0.3 -2.6 -4.0 -5.4 -6.2 -6.9 - United States a 1.5 -2.6 -3.5 -4.8 -5.2 -5.6 - Canada -2.3 -1.9 -2.3 -2.4 -2.7 -2.8 0.7 Mexico 1.0 1.7 1.7 1.6 1.5 1.3 1.1 Chile 0.1 0.1 0.1 0.2 0.2 0.2 1.7 OECD Europe 7.8 10.9 11.9 12.7 13.0 14.0 2.1 North Europe 2.4 5.2 5.9 6.1 6.1 6.3 3.5

  11. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    2 Appendix A Table A7. World coal consumption by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 21.0 18.7 20.3 20.5 20.1 20.0 20.0 0.2 United States a 19.6 17.3 19.2 19.3 19.2 19.0 19.0 0.3 Canada 0.7 0.7 0.6 0.6 0.4 0.4 0.4 -2.5 Mexico and Chile 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.3 OECD Europe 12.9 13.4 13.2 13.3 13.1 12.8 12.6 -0.2 OECD Asia 9.7 9.7 10.2 10.1 10.1 10.1 10.1 0.1

  12. Appendix A: Reference case projections

    Gasoline and Diesel Fuel Update (EIA)

    4 Appendix A Table A9. World consumption of hydroelectricity and other renewable energy by region, Reference case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 13.1 12.9 15.6 16.6 17.5 18.6 20.3 1.6 United States a 7.9 7.7 9.3 9.7 9.9 10.4 11.3 1.4 Canada 4.3 4.2 4.8 5.1 5.5 5.8 6.3 1.4 Mexico and Chile 0.9 1.0 1.5 1.8 2.1 2.4 2.7 3.7 OECD Europe 10.7 11.5 15.7 16.7 17.3 18.5 19.6 1.9 OECD Asia

  13. Case Study - Compressed Natural Gas Refuse Fleets

    SciTech Connect (OSTI)

    Laughlin, M; Burnham, A.

    2014-02-01

    This case study explores the use of heavy-duty refuse trucks fueled by compressed natural gas highlighting three fleets from very different types of organizations.

  14. Enhancements to Natural Attenuation: Selected Case Studies |...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Selected Case Studies More Documents & Publications Building C-400 Thermal Treatment 90% Remedial Design Report and Site Investigation Natural and Enhanced Attenuation of Soil ...

  15. Multi-facility Workflow Case Study

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Workflow Case Study For one experiment at the Linac Coherent Light Source (LCLS) at SLAC National Lab, scientists needed to process their raw data to analyze catalytic...

  16. Building America Technology Solutions Case Study: Combustion...

    Energy Savers [EERE]

    Combustion Safety Simplified Test Protocol Building America Technology Solutions Case Study: Combustion Safety Simplified Test Protocol Two U.S. Department of Energy Building ...

  17. Building America Technology Solutions Case Study: Evaluation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation of Passive Vents in New-Construction Multifamily Buildings Building America Technology Solutions Case Study: Evaluation of Passive Vents in New-Construction Multifamily ...

  18. A Case Study of Danville Utilities:

    SciTech Connect (OSTI)

    2010-03-09

    This case study provides information on how Danville Utilities utilized ITP Industrial Assessment Centers to provide energy efficiency resources to key accounts.

  19. Business Case for Technical Qualification Program Accreditation...

    Broader source: Energy.gov (indexed) [DOE]

    Business Case for TQP Accreditation Incentives (21.27 KB) More Documents & Publications Technical Qualification Program Self-Assessment Report - Los Alamos Site Office - 2007 ...

  20. PNCA-02 Rate Case (rates/ratecases)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Proposed Adjustment to the Rate for Interchange Energy Imbalances Under the Pacific Northwest Coordination Agreement (PNCA-02 Rate Case) (updated on April 26, 2002) BPA has issued...

  1. Raft River geoscience case study

    SciTech Connect (OSTI)

    Dolenc, M.R.; Hull, L.C.; Mizell, S.A.; Russell, B.F.; Skiba, P.A.; Strawn, J.A.; Tullis, J.A.

    1981-11-01

    The Raft River Geothermal Site has been evaluated over the past eight years by the United States Geological Survey and the Idaho National Engineering Laboratory as a moderate-temperature geothermal resource. The geoscience data gathered in the drilling and testing of seven geothermal wells suggest that the Raft River thermal reservoir is: (a) produced from fractures found at the contact metamorphic zone, apparently the base of detached normal faulting from the Bridge and Horse Well Fault zones of the Jim Sage Mountains; (b) anisotropic, with the major axis of hydraulic conductivity coincident to the Bridge Fault Zone; (c) hydraulically connected to the shallow thermal fluid of the Crook and BLM wells based upon both geochemistry and pressure response; (d) controlled by a mixture of diluted meteoric water recharging from the northwest and a saline sodium chloride water entering from the southwest. Although the hydrogeologic environment of the Raft River geothermal area is very complex and unique, it is typical of many Basin and Range systems.

  2. the-schedule-based-transit-model

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    The Schedule-Based transit model of the Chicago Metropolitan Area Vadim Sokolov Transportation Research and Analysis Computing Center Argonne National Laboratory List of Authors ================ Vadim Sokolov Transportation Research and Analysis Computing Center Argonne National Laboratory 277 International Drive West Chicago, IL 60185 Abstract ========= Usually public transit systems are modeled using so called frequency based approach. In this case transit route times are defined in terms of

  3. Evaluation of Missed Energy Saving Opportunity Based on Illinois Home Performance Program Field Data: Homeowner Selected Upgrades vs. Cost-Optimized Solutions, Chicago, Illinois (Fact Sheet), Building America Case Study: Whole-House Solutions for Existing Homes, Building Technologies Office (BTO)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Missed Energy Saving Opportunity Based on Illinois Home Performance Program Field Data: Homeowner Selected Upgrades vs. Cost-Optimized Solutions Chicago, Illinois PROJECT INFORMATION Construction: Retrofit Type: Single-family homes Building Component: Envelope Location: Chicago, IL Technical Support Partner: Partnership for Advanced Residential Retrofit, www.gastechnology.org/PARR Year Tested: 2013 Climate Zone: Zone 5 (cold) PROJECT HOUSING GROUPS The table below depicts the percent that each

  4. Best Practices in Grid Integration of Variable Wind Power: Summary of Recent US Case Study Results and Mitigation Measures

    SciTech Connect (OSTI)

    Smith, J. Charles (UWIG); Parsons, B.; (NREL), Acker, T.; (NAU), Milligan, M.; (NREL), Zavadil, R.

    2010-01-22

    This paper will summarize results from a number of utility wind integration case studies conducted recently in the US, and outline a number of mitigation measures based on insights from those studies.

  5. Federal interagency ecosystem management initiative: Great Lakes ecosystem case study

    SciTech Connect (OSTI)

    Cordle, S.

    1995-12-01

    In August 1994 a team of representatives from six Federal agencies conducted a case study of ecosystem management practices in the Great Lakes. Its report was based on interviews carried out in Chicago, Illinois, and Ann Arbor, Michigan; on phone interviews; and on written materials provided by Federal and State officials as well as representatives of Tribal organizations, non-governmental organizations, academia, industry, and the International Joint Commission. The report describes mainly what the participants told or provided to the survey team, with a few explicit conclusions and recommendations from the team. The issues covered by the survey included Legal, Institutional, Science and Information, Budget, and Public Participation.

  6. Multistrategy learning: A case study

    SciTech Connect (OSTI)

    Domingos, P.

    1996-12-31

    Two of the most popular approaches to induction are instance-based learning (IBL) and rule generation. Their strengths and weaknesses are largely complementary. IBL methods are able to identify small details in the instance space, but have trouble with attributes that are relevant in some parts of the space but not others. Conversely, rule induction methods may overlook small exception regions, but are able to select different attributes in different parts of the instance space. The two methods have been unified in the RISE algorithm. RISE views instances as maximally specific rules, forms more general rules by gradually clustering instances of the same class, and classifies a test example by letting the nearest rule win. This approach potentially combines the advantages of rule induction and IBL, and has indeed been observed to be more accurate than each on a large number of bench-mark datasets. However, it is important to determine if this performance is indeed due to the hypothesized advantages, and to define the situations in which RISE`s bias will and will not be preferable to those of the individual approaches. This abstract reports experiments to this end in artificial domains.

  7. DIGITAL TECHNOLOGY BUSINESS CASE METHODOLOGY GUIDE & WORKBOOK

    SciTech Connect (OSTI)

    Thomas, Ken; Lawrie, Sean; Hart, Adam; Vlahoplus, Chris

    2014-09-01

    Performance advantages of the new digital technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. This Business Case Methodology approaches building a business case for a particular technology or suite of technologies by detailing how they impact an operator in one or more of the three following areas: Labor Costs, Non-Labor Costs, and Key Performance Indicators (KPIs). Key to those impacts will be identifying where the savings are “harvestable,” meaning they result in an actual reduction in headcount and/or cost. The report consists of a Digital Technology Business Case Methodology Guide and an accompanying spreadsheet workbook that will enable the user to develop a business case.

  8. Appendix B: High Economic Growth case projections

    Gasoline and Diesel Fuel Update (EIA)

    B High Economic Growth case projections This page inTenTionally lefT blank 43 U.S. Energy Information Administration | International Energy Outlook 2016 High Economic Growth case projections Table B1. World total primary energy consumption by region, High Economic Growth case, 2011-40 (quadrillion Btu) Region History Projections Average annual percent change, 2012-40 2011 2012 2020 2025 2030 2035 2040 OECD OECD Americas 120.6 118.1 128.2 132.3 137.0 142.4 150.1 0.9 United States a 96.8 94.4

  9. Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Goals | Department of Energy Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Comprehensive Energy Program at Patrick Air Force Base Set to Exceed Energy Goals Federal Energy Management Program case study focuses on Patrick Air Force Base's use of a utility energy services contract to achieve its energy goals. Download the Patrick Air Force Base case study. (709.94 KB) More Documents & Publications FPL Energy Services ESCO Qualification Sheet UESC Project

  10. Energy management study: A proposed case of government building

    SciTech Connect (OSTI)

    Tahir, Mohamad Zamhari; Nawi, Mohd Nasrun Mohd; Baharum, Mohd Faizal

    2015-05-15

    Align with the current needs of the sustainable and green technology in Malaysian construction industry, this research is conducted to seek and identify opportunities to better manage energy use including the process of understand when, where, and how energy is used in a building. The purpose of this research is to provide a best practice guideline as a practical tool to assist construction industry in Malaysia to improve the energy efficiency of the office building during the post-production by reviewing the current practice of the building operation and maintenance in order to optimum the usage and reduce the amount of energy input into the building. Therefore, this paper will review the concept of maintenance management, current issue in energy management, and on how the research process will be conducted. There are several process involves and focuses on technical and management techniques such as energy metering, tracing, harvesting, and auditing based on the case study that will be accomplish soon. Accordingly, a case study is appropriate to be selected as a strategic research approach in which involves an empirical investigation of a particular contemporary phenomenon within its real life context using multiple sources of evidence for the data collection process. A Government office building will be selected as an appropriate case study for this research. In the end of this research, it will recommend a strategic approach or model in a specific guideline for enabling energy-efficient operation and maintenance in the office building.

  11. Power Rate Cases (pbl/rates)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Choices (2003-06) Power Function Review (PFR) Firstgov Power Rate Cases BPA's wholesale power rates are set to recover its costs and repay the U.S. Treasury for the Federal...

  12. Summit Manufacturing: Case Closure (2010-SE-0303)

    Broader source: Energy.gov [DOE]

    DOE closed this case against Summit Manufacturing, Inc. without civil penalty after Summit Manufacturing provided information that the non-compliant products were not sold in the United States.

  13. SEP Case Study Webinar: Detroit Diesel Slides

    Broader source: Energy.gov [DOE]

    This page contains the presentation slides from the Superior Energy Performance (SEP) Measurement and Verification Case Study webinar on Detroit Diesel hosted on July 14, 2016. This webinar...

  14. Community Redevelopment Case Study: Jekyll Island

    Broader source: Energy.gov [DOE]

    Presentation—given at the April 2012 Federal Utility Partnership Working Group (FUPWG) meeting—features photos from a case study about Jekyll Island's community redevelopment project in Georgia.

  15. Electricity Generation and Environmental Externalities: Case Studies

    Reports and Publications (EIA)

    1995-01-01

    Provides an overview of the economic foundation of externalities, the federal and state regulatory approaches, and case studies of the impacts of the externality policies adopted by three states.

  16. Case hardenable nickel-cobalt steel

    SciTech Connect (OSTI)

    Qian, Yana; Olson, Gregory B.

    2012-04-17

    An advanced secondary hardening carburized Ni--Co steel achieves an improved case hardness of about 68-69 Rc together with nominal core hardness of about 50 Rc.

  17. SEP CASE STUDY WEBINAR: HARBEC SLIDES

    Broader source: Energy.gov [DOE]

    This page contains the presentation slides from the Superior Energy Performance (SEP) Measurement and Verification Case Study webinar on HARBEC hosted on September 9, 2015. This webinar highlights...

  18. OHA Worker Appeal Cases Archive File

    Office of Energy Efficiency and Renewable Energy (EERE)

    This is a archive file of our Worker Appeal decisions, Please download this file to your local computer and use the build in adobe search feature. Individual cases are listed in the bookmark...

  19. SmartBuildings Detroit Commercial Case Study

    Broader source: Energy.gov [DOE]

    SmartBuildings Detroit Commercial Case Study, a document from BetterBuildings for Michigan posted on the website of the U.S. Department of Energy's Better Buildings Neighborhood Program.

  20. Case Study - EPB Smart Grid Investment Grant

    Energy Savers [EERE]

    ... for future planning purposes. "We expect the number of customer- minutes lost to power outages to be down by 40 percent or more, and that's something that will benefit Case Study ...

  1. Monitoring cathodic protection of well casings

    SciTech Connect (OSTI)

    Dabkowski, J.

    1980-01-01

    Because conventional downhole logging of gas storage wells to determine cathodic-protection levels is expensive and inconvenient, a program was developed (1) to predict downhole casing-to-soil potentials from wellhead measurements in the presence of interference and (2 )to model the mutual interference effects occurring between the wells and the cathodic-protection systems. In the first phase of this project, a transmission-line model that was developed to represent the well casing electrically adequately predicted the downhole potentials for both ideal and nonideal polarization conditions. By allowing the number of sections used and their parameter values as variables, the model can accommodate different environments and casing configurations. The model's representation of a well casing by a lumped-parameter electrical network will also permit interference studies between mutually coupled wells.

  2. BTS Case Study: The Galloway Family Home

    SciTech Connect (OSTI)

    Brandegee Group

    1999-03-08

    Case study of an energy-efficient Habitat for Humanity house that uses 30% less energy than conventional residential construction. The project was part of the Jimmy Carter Work Project in rural Appalachia in 1997.

  3. Pilot Project Technology Business Case: Mobile Work Packages

    SciTech Connect (OSTI)

    Thomas, Ken; Lawrie, Sean; Niedermuller, Josef

    2015-05-01

    Performance advantages of the new pilot project technologies are widely acknowledged, but it has proven difficult for utilities to derive business cases for justifying investment in these new capabilities. Lack of a business case is often cited by utilities as a barrier to pursuing wide-scale application of digital technologies to nuclear plant work activities. The decision to move forward with funding usually hinges on demonstrating actual cost reductions that can be credited to budgets and thereby truly reduce O&M or capital costs. Technology enhancements, while enhancing work methods and making work more efficient, often fail to eliminate workload such that it changes overall staffing and material cost requirements. It is critical to demonstrate cost reductions or impacts on non-cost performance objectives in order for the business case to justify investment by nuclear operators. The Business Case Methodology (BCM) was developed in September of 2015 to frame the benefit side of II&C technologies to address the “benefit” side of the analysis—as opposed to the cost side—and how the organization evaluates discretionary projects (net present value (NPV), accounting effects of taxes, discount rates, etc.). The cost and analysis side is not particularly difficult for the organization and can usually be determined with a fair amount of precision (not withstanding implementation project cost overruns). It is in determining the “benefits” side of the analysis that utilities have more difficulty in technology projects and that is the focus of this methodology. The methodology is presented in the context of the entire process, but the tool provided is limited to determining the organizational benefits only. This report describes a the use of the BCM in building a business case for mobile work packages, which includes computer-based procedures and other automated elements of a work package. Key to those impacts will be identifying where the savings are â

  4. The Business Case for Fuel Cells

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    CELLS THE BUSINESS CASE FOR FUEL Hydrogen for Local Leaders Webinar May 17, 2011 Sandra Curtin Research Director Breakthrough Technologies Institute/Fuel Cells 2000 FUEL CELLS 2000 | U.S. nonprofit organization | Leading non-aligned source for fuel cell information since 1993 | Award-winning services | Education through outreach/publications/ website | www.fuelcells.org | www.fuelcellinsider.org BUSINESS CASE FOR FUEL CELLS Download at Profiles 38 nationally-recognized companies, including

  5. Cathodic protection of storage field well casings

    SciTech Connect (OSTI)

    Dabkowski, J.

    1986-01-01

    Downhole logging of gas storage field wells to determine cathodic protection (CP) levels is expensive and requires removing the well from service. A technique allowing the prediction of downhole CP levels by modeling combined with limiting field measurements would provide the industry with a cost-effective means of implementing and monitoring casing protection. A computer model has been developed for a cathodically protected well casing.

  6. Highly Integrated Quality Assurance – An Empirical Case

    SciTech Connect (OSTI)

    Drake Kirkham; Amy Powell; Lucas Rich

    2011-02-01

    Highly Integrated Quality Assurance – An Empirical Case Drake Kirkham1, Amy Powell2, Lucas Rich3 1Quality Manager, Radioisotope Power Systems (RPS) Program, Idaho National Laboratory, P.O. Box 1625 M/S 6122, Idaho Falls, ID 83415-6122 2Quality Engineer, RPS Program, Idaho National Laboratory 3Quality Engineer, RPS Program, Idaho National Laboratory Contact: Voice: (208) 533-7550 Email: Drake.Kirkham@inl.gov Abstract. The Radioisotope Power Systems Program of the Idaho National Laboratory makes an empirical case for a highly integrated Quality Assurance function pertaining to the preparation, assembly, testing, storage and transportation of 238Pu fueled radioisotope thermoelectric generators. Case data represents multiple campaigns including the Pluto/New Horizons mission, the Mars Science Laboratory mission in progress, and other related projects. Traditional Quality Assurance models would attempt to reduce cost by minimizing the role of dedicated Quality Assurance personnel in favor of either functional tasking or peer-based implementations. Highly integrated Quality Assurance adds value by placing trained quality inspectors on the production floor side-by-side with nuclear facility operators to enhance team dynamics, reduce inspection wait time, and provide for immediate, independent feedback. Value is also added by maintaining dedicated Quality Engineers to provide for rapid identification and resolution of corrective action, enhanced and expedited supply chain interfaces, improved bonded storage capabilities, and technical resources for requirements management including data package development and Certificates of Inspection. A broad examination of cost-benefit indicates highly integrated Quality Assurance can reduce cost through the mitigation of risk and reducing administrative burden thereby allowing engineers to be engineers, nuclear operators to be nuclear operators, and the cross-functional team to operate more efficiently. Applicability of this case

  7. Federal antitrust remedies in electric cases

    SciTech Connect (OSTI)

    Sponseller, D.

    1984-02-01

    The issue of antitrust remedies available in electric cases is far from settled. The courts and the Federal Energy Regulatory Commission (FERC) have taken various paths in the last year. On the one hand are the Chanute and Alabama Power cases which appear to encourage competition in the public interest. Using such inclusive criteria as potential anticompetitive affects could give great leeway in ordering wheeling or other forms of interconnection. Most of the cases, however, seem intent on restricting federal jurisdiction over antitrust remedies. The FERC appears ready to relinquish its role in ordering wheeling by asserting that wheeling can only be compelled for energy or conservation reasons not for fostering competition. After a honeymoon period of making price-squeeze allegations easier to prove, the courts seem to be considering price-squeeze cases strictly as antitrust litigation rather than as antitrust utility regulatory cases, thereby invoking a greater burden of proof. In their efforts not to be too swift in interfering with the market or promoting competition, the courts seem to have lost sight of the function of preventing discrimination. It appears clear that the courts and the commission will be increasingly reluctant to impose wheeling as a remedy. The Supreme Court at least, in denying certiorari in the Alabama Power case, has left an opening for redress through potential anticompetitive affects, although they may be nebulous at best.

  8. Live Webinar on Better Buildings Case Competition: Energy Efficiency in the Restaurant Franchise Model Case Study

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "A Side of Savings: Energy Efficiency in the Restaurant Franchise Model Case Study."

  9. Live Webinar on Better Buildings Case Competition: Taking Commercial PACE Financing to Scale, a Case Study

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "A Side of Savings: Energy Efficiency in the Restaurant Franchise Model Case Study."

  10. Category:BLM Geothermal Case | Open Energy Information

    Open Energy Info (EERE)

    Jump to: navigation, search GEOTHERMAL ENERGYGeothermal Home BLM Geothermal Case US Bureau of Land Management (BLM) Case. Add.png Add a new BLM Geothermal Case Pages in category...

  11. Category:BLM CaseStatus | Open Energy Information

    Open Energy Info (EERE)

    ENERGYGeothermal Home BLM Case Status Status of cases issued by the United States Bureau of Land Management (BLM) to organizations to utilize the land resources for geothermal...

  12. Business Case for Energy Efficient Building Retrofit and Renovation...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Business Case for Energy Efficient Building Retrofit and Renovation Business Case for Energy Efficient Building Retrofit and Renovation This report outlines ways to make the right ...

  13. The Business Case for Fuel Cells 2015: Powering Corporate Sustainabili...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    5: Powering Corporate Sustainability The Business Case for Fuel Cells 2015: Powering ... The Business Case for Fuel Cells 2015: Powering Corporate Sustainability (5.76 MB) More ...

  14. Laboratories for the 21st Century Case Studies

    Broader source: Energy.gov [DOE]

    These case studies feature examples of energy-efficient laboratories for the 21st century. The Featured Concepts Table outlines technologies covered in each case study.

  15. DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: Dwell Development, Reclaimed Modern, Seattle, WA DOE Zero Energy Ready Home Case Study: ...

  16. Text-Alternative Version: MSSLC Member Case Studies - LED Street...

    Energy Savers [EERE]

    MSSLC Member Case Studies - LED Street Lighting Programs Webinar Text-Alternative Version: MSSLC Member Case Studies - LED Street Lighting Programs Webinar Below is the ...

  17. Suppress Carrier Recombination by Introducing Defects: The Case...

    Office of Scientific and Technical Information (OSTI)

    The Case of Si Solar Cell Citation Details In-Document Search Title: Suppress Carrier Recombination by Introducing Defects: The Case of Si Solar Cell Authors: Liu, Yuanyue ; ...

  18. DOE Zero Energy Ready Home Case Study: Southern Energy Homes...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southern Energy Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Energy Homes, Russellville, AL DOE Zero Energy Ready Home Case Study: Southern Energy Homes, ...

  19. DOE Zero Energy Ready Home Case Study: Weiss Building & Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Weiss Building & Development LLC, System Home, River Forest, IL DOE Zero Energy Ready Home Case Study: Weiss Building & Development LLC, System Home, River Forest, IL Case study of ...

  20. LIFE: The Case for Early Commercialization of Fusion Energy ...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: LIFE: The Case for Early Commercialization of Fusion Energy Citation Details In-Document Search Title: LIFE: The Case for Early Commercialization of Fusion Energy ...

  1. Volunteers Leading Technology, A Case Study: Chewonki Renewable...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project Volunteers Leading Technology, A Case Study: Chewonki Renewable Hydrogen Project This presentation ...

  2. UNF Energy Efficiency Case Studies | Open Energy Information

    Open Energy Info (EERE)

    UNF Energy Efficiency Case Studies Jump to: navigation, search Tool Summary Name: UNF Energy Efficiency Case Studies AgencyCompany Organization: United Nations Foundation Sector:...

  3. Better Buildings Low Income Peer Exchange CallFeaturing: Case...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    BetterBuildings Low Income Peer Exchange Call Featuring: Case study on integration of ... and Roll Call * Case study on integration of income-qualified programs into ...

  4. The Business Case for Fuel Cells 2013: Reliability, Resiliency...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    The Business Case for Fuel Cells 2013: Reliability, Resiliency & Savings The Business Case for Fuel Cells 2013: Reliability, Resiliency & Savings This report, compiled by Fuel ...

  5. Business Case for Compressed Natural Gas in Municipal Fleets...

    Open Energy Info (EERE)

    Business Case for Compressed Natural Gas in Municipal Fleets Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Business Case for Compressed Natural Gas in Municipal Fleets...

  6. Stand Alone Renewable Energy Systems Case Studies | Open Energy...

    Open Energy Info (EERE)

    Alone Renewable Energy Systems Case Studies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Stand Alone Renewable Energy Systems Case Studies AgencyCompany...

  7. Mini-Grid Renewable Energy Systems Case Studies | Open Energy...

    Open Energy Info (EERE)

    Mini-Grid Renewable Energy Systems Case Studies Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Mini-Grid Renewable Energy Systems Case Studies AgencyCompany...

  8. DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Southeast Volusia Habitat for Humanity, Edgewater, FL DOE Zero Energy Ready Home Case Study: Southeast Volusia Habitat for Humanity, Edgewater, FL Case study of a DOE Zero Energy ...

  9. Addressing Uncertainties in Design Inputs: A Case Study of Probabilist...

    Office of Environmental Management (EM)

    Addressing Uncertainties in Design Inputs: A Case Study of Probabilistic Settlement Evaluations for Soft Zone Collapse at SWPF Addressing Uncertainties in Design Inputs: A Case ...

  10. DOE Zero Energy Ready Home Case Study: Heirloom Design Build...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Heirloom Design Build, Euclid Avenue, Atlanta, GA DOE Zero Energy Ready Home Case Study: Heirloom Design Build, Euclid Avenue, Atlanta, GA Case study of a DOE 2015 Housing ...