Sample records for trial standard levels

  1. Tables for Trials and Failures with PD for Designated Confidence Level

    SciTech Connect (OSTI)

    Leach, Janice

    2014-02-01T23:59:59.000Z

    Two attachments are provided for performance testing of sensors and other Physical Protection System (PPS) components.#2; The first attachment is a table of Trials and Failures, giving Probability of Detection (PD) for a designated confidence level and sorted by trials.#2; The second attachment contains the same data, sorted by failures.

  2. A SURVEY OF STATE-LEVEL COST ESTIMATES OF RENEWABLES PORTFOLIO STANDARDS

    E-Print Network [OSTI]

    Barbose, Galen

    2014-01-01T23:59:59.000Z

    LEVEL COST ESTIMATES OF RENEWABLES PORTFOLIO STANDARDS Galenthe incremental cost of renewables portfolio standards (RPS)Washington DC have adopted renewables portfolio standards (

  3. Techno-Economic Analysis of Indian Draft Standard Levels for Room Air Conditioners

    E-Print Network [OSTI]

    McNeil, Michael A.; Iyer, Maithili

    2008-01-01T23:59:59.000Z

    Standard Levels for Room Air Conditioners Michael A. McNeilFigure 1 – MEPS for 1.5 ton Window Air Conditioners – 1994-4 Figure 2 – Air Conditioner Test Data and Rating Plan -

  4. High level waste storage tanks 242-A evaporator standards/requirement identification document

    SciTech Connect (OSTI)

    Biebesheimer, E.

    1996-01-01T23:59:59.000Z

    This document, the Standards/Requirements Identification Document (S/RIDS) for the subject facility, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment. It lists those source documents from which requirements were extracted, and those requirements documents considered, but from which no requirements where taken. Documents considered as source documents included State and Federal Regulations, DOE Orders, and DOE Standards

  5. Techno-Economic Analysis of Indian Draft Standard Levels for RoomAir Conditioners

    SciTech Connect (OSTI)

    McNeil, Michael A.; Iyer, Maithili

    2007-03-01T23:59:59.000Z

    The Indian Bureau of Energy Efficiency (BEE) finalized its first set of efficiency standards and labels for room air conditioners in July of 2006. These regulations followed soon after the publication of levels for frost-free refrigerators in the same year. As in the case of refrigerators, the air conditioner program introduces Minimum Efficiency Performance Standards (MEPS) and comparative labels simultaneously, with levels for one to five stars. Also like the refrigerator program, BEE defined several successive program phases of increasing stringency. In support of BEE's refrigerator program, Lawrence Berkeley National Laboratory (LBNL) produced an analysis of national impacts of standards in collaboration with the Collaborative Labeling and Standards Program (CLASP). That analysis drew on LBNL's experience with standards programs in the United States, as well as many other countries. Subsequently, as part of the process for setting optimal levels for air conditioner regulations, CLASP commissioned LBNL to provide support to BEE in the form of a techno-economic evaluation of air conditioner efficiency technologies. This report describes the methodology and results of this techno-economic evaluation. The analysis consists of three components: (1) Cost effectiveness to consumers of efficiency technologies relative to current baseline. (2) Impacts on the current market from efficiency regulations. (3) National energy and financial impacts. The analysis relied on detailed and up-to-date technical data made available by BEE and industry representatives. Technical parameters were used in conjunction with knowledge about air conditioner use patterns in the residential and commercial sectors, and prevailing marginal electricity prices, in order to give an estimate of per-unit financial impacts. In addition, the overall impact of the program was evaluated by combining unit savings with market forecasts in order to yield national impacts. LBNL presented preliminary results of these analyses in May 2006, at a meeting of BEEs Technical Committee for Air Conditioners. This meeting was attended by a wide array of stakeholder, including industry representatives, engineers and consumer advocates. Comments made by stakeholders at this meeting are incorporated into the final analysis presented in this report. The current analysis begins with the Rating Plan drafted by BEE in 2006, along with an evaluation of the market baseline according to test data submitted by manufacturers. MEPS, label rating levels, and baseline efficiencies are presented in Section 2. First, we compare Indian MEPS with current standards in other countries, and assess their relative stringency. Baseline efficiencies are then used to estimate the fraction of models likely to remain on the market at each phase of the program, and the impact on market-weighted efficiency levels. Section 3 deals with cost-effectiveness of higher efficiency design options. The cost-benefit analysis is grounded in technical parameters provided by industry representatives in India. This data allows for an assessment of financial costs and benefits to consumers as a result of the standards and labeling program. A Life-Cycle Cost (LCC) calculation is used to evaluate the impacts of the program at the unit level, thus providing some insight into the appropriateness of the levels chosen, and additional opportunities for further ratcheting. In addition to LCC, we also calculate payback periods, cost of conserved energy (CCE), and return on investment (ROI). Finally, Section 4 covers national impacts. This is an extension of unit level estimates in the two previous sections. Extrapolation to the national level depends on a forecast of air conditioner purchases (shipments), which we describe here. Following the cost-benefit analysis, we construct several efficiency scenarios including the BEE plan, but also considering further potential for efficiency improvement. These are combined with shipments through a stock accounting model in order to forecast air conditioner energy consumption in each sc

  6. Understanding and Informing the Policy Environment: State-Level Renewable Fuels Standards

    SciTech Connect (OSTI)

    Brown, E.; Cory, K.; Arent, D.

    2007-01-01T23:59:59.000Z

    Renewable fuels standard (RFS) policies are becoming a popular public policy mechanism for developing the market for renewable fuels in the transportation sector. During the past decade, U.S. states and several countries began implementing these more market-based (less command and control) policies to support increased biofuels production and use. This paper presents an overview of current and proposed U.S. state-level policies, as well as selected electric sector policies and international fuel standard policies. Current U.S. state-level renewable fuel policies list drivers including an improved economy and environment, as well as fuel self-sufficiency. Best practices and experience from an evaluation of renewable portfolio standards (RPS) in the United States and international RFS policies can inform U.S. state-level policy by illustrating the importance of policy flexibility, binding targets, effective cost caps, and tradable permits. Understanding and building on the experiences from these previous policies can improve the policy mechanism and further develop a market for renewable fuels to meet the goals of improved economy, environment, and fuel self-sufficiency.

  7. Quality of Survival and Growth in Children and Young Adults in the PNET4 European Controlled Trial of Hyperfractionated Versus Conventional Radiation Therapy for Standard-Risk Medulloblastoma

    SciTech Connect (OSTI)

    Kennedy, Colin, E-mail: crk1@soton.ac.uk [University of Southampton Faculty of Medicine and University Hospital Southampton National Health Service Foundation Trust, Southampton (United Kingdom); Bull, Kim [University of Southampton Faculty of Medicine and University Hospital Southampton National Health Service Foundation Trust, Southampton (United Kingdom); Chevignard, Mathilde [Hôpitaux de Saint Maurice, Saint Maurice (France); Neurophysiology, University of Pierre et Marie-Curie Paris 6, Paris (France); Culliford, David [University of Southampton Faculty of Medicine and University Hospital Southampton National Health Service Foundation Trust, Southampton (United Kingdom); Dörr, Helmuth G. [Kinder- und Jugendklinik der Universität Erlangen, Erlangen (Germany); Doz, François [Institut Curie and University Paris Descartes, Sorbonne Paris Cité (France); Kortmann, Rolf-Dieter [Department of Radiation Therapy, University of Leipzig, Leipzig (Germany); Lannering, Birgitta [Department of Pediatrics, The Sahlgren Academy, University of Gothenburg, Gothenburg (Sweden); Massimino, Maura [Fondazione Istituto di Ricovero e Cura a Carattere Scientifico IRCCS Istituto Nazionale dei Tumori, Milan (Italy); Navajas Gutiérrez, Aurora [Hospital Universitario Cruces, Baracaldo-Vizcaya (Spain); Rutkowski, Stefan [University Medical Center Hamburg-Eppendorf, Hamburg (Germany); Spoudeas, Helen A. [Center for Pediatric Endocrinology, University College London, London (United Kingdom); Calaminus, Gabriele [Pediatric Oncology, University of Muenster, Muenster (Germany)

    2014-02-01T23:59:59.000Z

    Purpose: To compare quality of survival in “standard-risk” medulloblastoma after hyperfractionated radiation therapy of the central nervous system with that after standard radiation therapy, combined with a chemotherapy regimen common to both treatment arms, in the PNET4 randomised controlled trial. Methods and Materials: Participants in the PNET4 trial and their parents/caregivers in 7 participating anonymized countries completed standardized questionnaires in their own language on executive function, health status, behavior, health-related quality of life, and medical, educational, employment, and social information. Pre- and postoperative neurologic status and serial heights and weights were also recorded. Results: Data were provided by 151 of 244 eligible survivors (62%) at a median age at assessment of 15.2 years and median interval from diagnosis of 5.8 years. Compared with standard radiation therapy, hyperfractionated radiation therapy was associated with lower (ie, better) z-scores for executive function in all participants (mean intergroup difference 0.48 SDs, 95% confidence interval 0.16-0.81, P=.004), but health status, behavioral difficulties, and health-related quality of life z-scores were similar in the 2 treatment arms. Data on hearing impairment were equivocal. Hyperfractionated radiation therapy was also associated with greater decrement in height z-scores (mean intergroup difference 0.43 SDs, 95% confidence interval 0.10-0.76, P=.011). Conclusions: Hyperfractionated radiation therapy was associated with better executive function and worse growth but without accompanying change in health status, behavior, or quality of life.

  8. Impact of Ultrahigh Baseline PSA Levels on Biochemical and Clinical Outcomes in Two Radiation Therapy Oncology Group Prostate Clinical Trials

    SciTech Connect (OSTI)

    Rodrigues, George, E-mail: george.rodrigues@lhsc.on.c [Department of Oncology, University of Western Ontario, London, Ontario (Canada); Bae, Kyounghwa [Department of Statistics, Radiation Therapy Oncology Group, Philadelphia, Pennsylvania (United States); Roach, Mack [Department of Radiation Oncology, University of California San Francisco, San Francisco, California (United States); Lawton, Colleen [Department of Radiation Oncology, Medical College of Wisconsin, Milwaukee, Wisconsin (United States); Donnelly, Bryan [Department of Surgical Oncology, University of Calgary, Calgary, Alberta (Canada); Grignon, David [Department of Pathology, Indiana Pathology Institute, Indianapolis, Indiana (United States); Hanks, Gerald [Department of Radiation Oncology, Fox Chase Cancer Center, Philadelphia, Pennsylvania (United States); Porter, Arthur [Department of Oncology, McGill University Health Centre, Montreal, Quebec (Canada); Lepor, Herbert [Department of Urology, NY University Langone Medical Center, New York, New York (United States); Sandler, Howard [Department of Radiation Oncology, Cedars-Sinai Medical Center, Los Angeles, California (United States)

    2011-06-01T23:59:59.000Z

    Purpose: To assess ultrahigh (UH; prostate-specific antigen [PSA]levels {>=}50 ng/ml) patient outcomes by comparison to other high-risk patient outcomes and to identify outcome predictors. Methods and Materials: Prostate cancer patients (PCP) from two Phase III Radiation Therapy Oncology Group clinical trials (studies 9202 and 9413) were divided into two groups: high-risk patients with and without UH baseline PSA levels. Predictive variables included age, Gleason score, clinical T stage, Karnofsky performance score, and treatment arm. Outcomes included overall survival (OS), distant metastasis (DM), and biochemical failure (BF). Unadjusted and adjusted hazard ratios (HRs) were calculated using either the Cox or Fine and Gray's regression model with associated 95% confidence intervals (CI) and p values. Results: There were 401 patients in the UH PSA group and 1,792 patients in the non-UH PSA PCP group of a total of 2,193 high-risk PCP. PCP with UH PSA were found to have inferior OS (HR, 1.19; 95% CI, 1.02-1.39, p = 0.02), DM (HR, 1.51; 95% CI, 1.19-1.92; p = 0.0006), and BF (HR, 1.50; 95% CI, 1.29-1.73; p < 0.0001) compared to other high-risk PCP. In the UH cohort, PSA level was found to be a significant factor for the risk of DM (HR, 1.01; 95% CI, 1.001-1.02) but not OS and BF. Gleason grades of 8 to 10 were found to consistently predict for poor OS, DM, and BF outcomes (with HR estimates ranging from 1.41-2.36) in both the high-risk cohort and the UH cohort multivariable analyses. Conclusions: UH PSA levels at diagnosis are related to detrimental changes in OS, DM, and BF. All three outcomes can be modeled by various combinations of all predictive variables tested.

  9. Survey of State-Level Cost and Benefit Estimates of Renewable Portfolio Standards

    SciTech Connect (OSTI)

    Heeter, J.; Barbose, G.; Bird, L.; Weaver, S.; Flores-Espino, F.; Kuskova-Burns, K.; Wiser, R.

    2014-05-01T23:59:59.000Z

    Most renewable portfolio standards (RPS) have five or more years of implementation experience, enabling an assessment of their costs and benefits. Understanding RPS costs and benefits is essential for policymakers evaluating existing RPS policies, assessing the need for modifications, and considering new policies. This study provides an overview of methods used to estimate RPS compliance costs and benefits, based on available data and estimates issued by utilities and regulators. Over the 2010-2012 period, average incremental RPS compliance costs in the United States were equivalent to 0.8% of retail electricity rates, although substantial variation exists around this average, both from year-to-year and across states. The methods used by utilities and regulators to estimate incremental compliance costs vary considerably from state to state and a number of states are currently engaged in processes to refine and standardize their approaches to RPS cost calculation. The report finds that state assessments of RPS benefits have most commonly attempted to quantitatively assess avoided emissions and human health benefits, economic development impacts, and wholesale electricity price savings. Compared to the summary of RPS costs, the summary of RPS benefits is more limited, as relatively few states have undertaken detailed benefits estimates, and then only for a few types of potential policy impacts. In some cases, the same impacts may be captured in the assessment of incremental costs. For these reasons, and because methodologies and level of rigor vary widely, direct comparisons between the estimates of benefits and costs are challenging.

  10. High level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 6

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 6) outlines the standards and requirements for the sections on: Environmental Restoration and Waste Management, Research and Development and Experimental Activities, and Nuclear Safety.

  11. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 4

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 4) presents the standards and requirements for the following sections: Radiation Protection and Operations.

  12. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 2

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Document (S/RID) is contained in multiple volumes. This document (Volume 2) presents the standards and requirements for the following sections: Quality Assurance, Training and Qualification, Emergency Planning and Preparedness, and Construction.

  13. Impacts of Standard 90.1-2007 for Commercial Buildings at State Level

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Gowri, Krishnan

    2009-10-12T23:59:59.000Z

    This report examines the requirements of Standard 90.1-2007 on commercial buildings on a state-by-state basis with a separate, stand-alone chapter for each state. Standard 90.1-2007 is compared to the current state code for most states. This is the final version of the draft previously cleared and assigned ERICA # PNNL-18544, titled "Commercial Nationwide Report."

  14. Randomized Noninferiority Trial of Reduced High-Dose Volume Versus Standard Volume Radiation Therapy for Muscle-Invasive Bladder Cancer: Results of the BC2001 Trial (CRUK/01/004)

    SciTech Connect (OSTI)

    Huddart, Robert A., E-mail: robert.huddart@icr.ac.uk [Institute of Cancer Research, Royal Marsden NHSFT (National Health Service Foundation Trust) (United Kingdom); Hall, Emma [Institute of Cancer Research (United Kingdom); Hussain, Syed A. [University of Liverpool (United Kingdom); Jenkins, Peter [Gloucestershire Hospitals NHSFT (United Kingdom); Rawlings, Christine [South Devon Healthcare NHSFT (United Kingdom); Tremlett, Jean [Brighton and Sussex University Hospitals (United Kingdom); Crundwell, Malcolm [Royal Devon and Exeter NHSFT (United Kingdom); Adab, Fawzi A. [University Hospital of North Staffordshire NHS Trust (United Kingdom); Sheehan, Denise [Royal Devon and Exeter NHSFT (United Kingdom); Syndikus, Isabel [Clatterbridge Cancer Centre NHSFT (United Kingdom); Hendron, Carey [University of Birmingham (United Kingdom); Lewis, Rebecca; Waters, Rachel [Institute of Cancer Research (United Kingdom); James, Nicholas D. [University of Birmingham (United Kingdom)

    2013-10-01T23:59:59.000Z

    Purpose: To test whether reducing radiation dose to uninvolved bladder while maintaining dose to the tumor would reduce side effects without impairing local control in the treatment of muscle-invasive bladder cancer. Methods and Materials: In this phase III multicenter trial, 219 patients were randomized to standard whole-bladder radiation therapy (sRT) or reduced high-dose volume radiation therapy (RHDVRT) that aimed to deliver full radiation dose to the tumor and 80% of maximum dose to the uninvolved bladder. Participants were also randomly assigned to receive radiation therapy alone or radiation therapy plus chemotherapy in a partial 2 × 2 factorial design. The primary endpoints for the radiation therapy volume comparison were late toxicity and time to locoregional recurrence (with a noninferiority margin of 10% at 2 years). Results: Overall incidence of late toxicity was less than predicted, with a cumulative 2-year Radiation Therapy Oncology Group grade 3/4 toxicity rate of 13% (95% confidence interval 8%, 20%) and no statistically significant differences between groups. The difference in 2-year locoregional recurrence free rate (RHDVRT ? sRT) was 6.4% (95% confidence interval ?7.3%, 16.8%) under an intention to treat analysis and 2.6% (?12.8%, 14.6%) in the “per-protocol” population. Conclusions: In this study RHDVRT did not result in a statistically significant reduction in late side effects compared with sRT, and noninferiority of locoregional control could not be concluded formally. However, overall low rates of clinically significant toxicity combined with low rates of invasive bladder cancer relapse confirm that (chemo)radiation therapy is a valid option for the treatment of muscle-invasive bladder cancer.

  15. Moving to a Higher Level for PV Reliability through Comprehensive Standards Based on Solid Science (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.

    2014-11-01T23:59:59.000Z

    PV reliability is a challenging topic because of the desired long life of PV modules, the diversity of use environments and the pressure on companies to rapidly reduce their costs. This presentation describes the challenges, examples of failure mechanisms that we know or don't know how to test for, and how a scientific approach is being used to establish international standards.

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Michigan Public Service Commission (PSC) first adopted interconnection standards for distributed generation (DG) in September 2003. The original standards provided for 5 levels of...

  17. Building America Webinar: Standardized Retrofit Packages — What Works to Meet Consistent Levels of Performance?

    Broader source: Energy.gov [DOE]

    This webinar will focus on specific Building America projects that have examined methods to consistently meet high levels of energy performance in existing homes, with a focus on retrofit packages that can be replicated across many homes.

  18. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 7

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    This Requirements Identification Document (RID) describes an Occupational Health and Safety Program as defined through the Relevant DOE Orders, regulations, industry codes/standards, industry guidance documents and, as appropriate, good industry practice. The definition of an Occupational Health and Safety Program as specified by this document is intended to address Defense Nuclear Facilities Safety Board Recommendations 90-2 and 91-1, which call for the strengthening of DOE complex activities through the identification and application of relevant standards which supplement or exceed requirements mandated by DOE Orders. This RID applies to the activities, personnel, structures, systems, components, and programs involved in maintaining the facility and executing the mission of the High-Level Waste Storage Tank Farms.

  19. Weighing the Costs and Benefits of Renewables Portfolio Standards: A Comparative Analysis of State-Level Policy Impact Projections

    E-Print Network [OSTI]

    Chen, Cliff; Wiser, Ryan; Bolinger, Mark

    2007-01-01T23:59:59.000Z

    M. Fripp. 2004. Putting Renewables to Work: How Many Jobsand S. Hempling. 2001. The Renewables Portfolio Standard: AEvaluating Experience with Renewables Portfolio Standards in

  20. High-level waste storage tank farms/242-A evaporator Standards/Requirements Identification Document (S/RID), Volume 7. Revision 1

    SciTech Connect (OSTI)

    Burt, D.L.

    1994-04-01T23:59:59.000Z

    The High-Level Waste Storage Tank Farms/242-A Evaporator Standards/Requirements Identification Document (S/RID) is contained in multiple volumes. This document (Volume 7) presents the standards and requirements for the following sections: Occupational Safety and Health, and Environmental Protection.

  1. Weighing the Costs and Benefits of Renewables Portfolio Standards:A Comparative Analysis of State-Level Policy Impact Projections

    SciTech Connect (OSTI)

    Chen, Cliff; Wiser, Ryan; Bolinger, Mark

    2007-01-16T23:59:59.000Z

    State renewables portfolio standards (RPS) have emerged as one of the most important policy drivers of renewable energy capacity expansion in the U.S. Collectively, these policies now apply to roughly 40% of U.S. electricity load, and may have substantial impacts on electricity markets, ratepayers, and local economies. As RPS policies have been proposed or adopted in an increasing number of states, a growing number of studies have attempted to quantify the potential impacts of these policies, focusing primarily on projecting cost impacts, but sometimes also estimating macroeconomic and environmental effects. This report synthesizes and analyzes the results and methodologies of 28 distinct state or utility-level RPS cost impact analyses completed since 1998. Together, these studies model proposed or adopted RPS policies in 18 different states. We highlight the key findings of these studies on the costs and benefits of RPS policies, examine the sensitivity of projected costs to model assumptions, assess the attributes of different modeling approaches, and suggest possible areas of improvement for future RPS analysis.

  2. Randomized, Multicenter Trial on the Effect of Radiation Therapy on Plantar Fasciitis (Painful Heel Spur) Comparing a Standard Dose With a Very Low Dose: Mature Results After 12 Months' Follow-Up

    SciTech Connect (OSTI)

    Niewald, Marcus, E-mail: marcus.niewald@uks.eu [Department of Radiation Oncology, Saarland University Medical Center, Homburg/Saar (Germany)] [Department of Radiation Oncology, Saarland University Medical Center, Homburg/Saar (Germany); Seegenschmiedt, M. Heinrich [Radiotherapy Center, Hamburg (Germany)] [Radiotherapy Center, Hamburg (Germany); Micke, Oliver [Franziskus Hospital, Bielefeld (Germany)] [Franziskus Hospital, Bielefeld (Germany); Graeber, Stefan [Institute for Medical Biometry, Epidemiology and Medical Informatics, Saarland University Medical Center, Homburg/Saar (Germany)] [Institute for Medical Biometry, Epidemiology and Medical Informatics, Saarland University Medical Center, Homburg/Saar (Germany); Muecke, Ralf [Lippe Hospital, Lemgo (Germany)] [Lippe Hospital, Lemgo (Germany); Schaefer, Vera; Scheid, Christine; Fleckenstein, Jochen; Licht, Norbert; Ruebe, Christian [Department of Radiation Oncology, Saarland University Medical Center, Homburg/Saar (Germany)] [Department of Radiation Oncology, Saarland University Medical Center, Homburg/Saar (Germany)

    2012-11-15T23:59:59.000Z

    Purpose: To conduct a randomized trial of radiation therapy for painful heel spur, comparing a standard dose with a very low dose. Methods and Materials: Sixty-six patients were randomized to receive radiation therapy either with a total dose of 6.0 Gy applied in 6 fractions of 1.0 Gy twice weekly (standard dose) or with a total dose of 0.6 Gy applied in 6 fractions of 0.1 Gy twice weekly (low dose). In all patients lateral opposing 4- to 6-MV photon beams were used. The results were measured using a visual analogue scale, the Calcaneodynia score, and the SF12 health survey. The fundamental phase of the study ended after 3 months, and the follow-up was continued up to 1 year. Patients with insufficient pain relief after 3 months were offered reirradiation with the standard dosage at any time afterward. Results: Of 66 patients, 4 were excluded because of withdrawal of consent or screening failures. After 3 months the results in the standard arm were highly significantly superior compared with those in the low-dose arm (visual analogue scale, P=.001; Calcaneodynia score, P=.027; SF12, P=.045). The accrual of patients was stopped at this point. Further evaluation after 12 months' follow-up showed the following results: (1) highly significant fewer patients were reirradiated in the standard arm compared with the low-dose arm (P<.001); (2) the results of patients in the low-dose arm who were reirradiated were identical to those in the standard arm not reirradiated (reirradiation as a salvage therapy if the lower dose was ineffective); (3) patients experiencing a favorable result after 3 months showed this even after 12 months, and some results even improved further between 3 and 12 months. Conclusions: This study confirms the superior analgesic effect of radiation therapy with 6-Gy doses on painful heel spur even for a longer time period of at least 1 year.

  3. Trial Attorney

    Broader source: Energy.gov [DOE]

    The Legal Division of the Office of Administrative Litigation (OAL) in the Federal Energy Regulatory Commission (FERC) is seeking a full-time attorney in our dynamic energy trial practice. The...

  4. High-level waste storage tank farms/242-A evaporator standards/requirements identification document (S/RID), Vol. 5

    SciTech Connect (OSTI)

    Not Available

    1994-04-01T23:59:59.000Z

    The Fire Protection functional area for the Hanford Site Tank Farm facilities and support structures is based on the application of relevant DOE orders, regulations, and industry codes and standards. The fire protection program defined in this document may be divided into three areas: (1) organizational, (2) administrative programmatic features, and (3) technical features. The information presented in each section is in the form of program elements and orders, regulations, industry codes, and standards that serve as the attributes of a fire protection program for the Tank Farm facilities. Upon completion this document will be utilized as the basis to evaluate compliance of the fire protection program being implemented for the Tank Farm facilities with the requirements of DOE orders and industry codes and standards.

  5. Scholastic Standards Scholastic Standards

    E-Print Network [OSTI]

    Scholastic Standards _______________ 1.8 Page 1 Scholastic Standards Center for Advising-7095 Gaye DiGregorio, Executive Director Scholastic standards are mandated by the faculty through the Faculty Council Committee on Scholastic Standards. Procedures relative to scholastic standards

  6. High level waste storage tank farms/242-A evaporator standards/requirements identification document phase 1 assessment report

    SciTech Connect (OSTI)

    Biebesheimer, E., Westinghouse Hanford Co.

    1996-09-30T23:59:59.000Z

    This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Report for the subject facility, represents the results of an Administrative Assessment to determine whether S/RID requirements are fully addressed by existing policies, plans or procedures. It contains; compliance status, remedial actions, and an implementing manuals report linking S/RID elements to requirement source to implementing manual and section.

  7. Got Standards? "Got Standards?"

    E-Print Network [OSTI]

    Vardeman, Stephen B.

    9000 standards were developed by the International Organization for Standardization, which was founded in 1946. The purpose of the organization was to promote the development of international standards in order to bring harmony to global standards for international trade. Enter ISO 9000. The Basics In order

  8. 2013 DRY BEAN YIELD TRIALS EXPERIMENT TITLE PLANTING DATE LOCATION ENTRIES DESIGN REPS HARVEST METHOD

    E-Print Network [OSTI]

    06/19/13 ENTRICAN MONTCALM 16 SQ. LATTICE 3 ROD PULLED 3218 STANDARD CRANBERRY YIELD TRIAL 06/19/13 ENTRICAN MONTCALM 25 SQ. LATTICE 4 ROD PULLED 3219 PRELIMINARY CRANBERRY YIELD TRIAL 06/19/13 ENTRICAN

  9. Walk the Line: The Development of Route Selection Standards for Spent Nuclear Fuel and High-level Radioactive Waste in the United States - 13519

    SciTech Connect (OSTI)

    Dilger, Fred [Black Mountain Research, Henderson, NV 81012 (United States)] [Black Mountain Research, Henderson, NV 81012 (United States); Halstead, Robert J. [State of Nevada Agency for Nuclear Projects, Carson City, NV 80906 (United States)] [State of Nevada Agency for Nuclear Projects, Carson City, NV 80906 (United States); Ballard, James D. [Department of Sociology, California State University, Northridge, CA 91330 (United States)] [Department of Sociology, California State University, Northridge, CA 91330 (United States)

    2013-07-01T23:59:59.000Z

    Although storage facilities for spent nuclear fuel (SNF) and high-level radioactive waste (HLRW) are widely dispersed throughout the United States, these materials are also relatively concentrated in terms of geographic area. That is, the impacts of storage occur in a very small geographic space. Once shipments begin to a national repository or centralized interim storage facility, the impacts of SNF and HLRW will become more geographically distributed, more publicly visible, and almost certainly more contentious. The selection of shipping routes will likely be a major source of controversy. This paper describes the development of procedures, regulations, and standards for the selection of routes used to ship spent nuclear fuel and high-level radioactive waste in the United States. The paper begins by reviewing the circumstances around the development of HM-164 routing guidelines. The paper discusses the significance of New York City versus the Department of Transportation and application of HM-164. The paper describes the methods used to implement those regulations. The paper will also describe the current HM-164 designated routes and will provide a summary data analysis of their characteristics. This analysis will reveal the relatively small spatial scale of the effects of HM 164. The paper will then describe subsequent developments that have affected route selection for these materials. These developments include the use of 'representative routes' found in the Department of Energy (DOE) 2008 Supplemental Environmental Impact Statement for the formerly proposed Yucca Mountain geologic repository. The paper will describe recommendations related to route selection found in the National Academy of Sciences 2006 report Going the Distance, as well as recommendations found in the 2012 Final Report of the Blue Ribbon Commission on America's Nuclear Future. The paper will examine recently promulgated federal regulations (HM-232) for selection of rail routes for hazardous materials transport. The paper concludes that while the HM 164 regime is sufficient for certain applications, it does not provide an adequate basis for a national plan to ship spent nuclear fuel and high-level radioactive waste to centralized storage and disposal facilities over a period of 30 to 50 years. (authors)

  10. Weighing the Costs and Benefits of State Renewables Portfolio Standards in the United States: A Comparative Analysis of State-Level Policy Impact Projections

    E-Print Network [OSTI]

    Chen, Cliff

    2009-01-01T23:59:59.000Z

    and Benefits of State Renewables Portfolio Standards: AM. Fripp. 2004. Putting Renewables to Work: How Many JobsLos Angeles Can Reach 20% Renewables Without Raising Rates.

  11. Standards and Conformity Assessment Training

    E-Print Network [OSTI]

    Standards and Conformity Assessment Training Workshops for Government Agencies Fundamentals of Standards and Conformity Assessment Training for all levels of government NIST offers interactive workshops and seminars for federal, state, and local government agencies on the fundamentals of standards, conformity

  12. TILT POUR TRIALS AND ANALYSIS Bob Bryant1

    E-Print Network [OSTI]

    Beckermann, Christoph

    TILT POUR TRIALS AND ANALYSIS Bob Bryant1 , Kent D. Carlson2 , Shouzhu Ou2 , Christoph Beckermann2 reduce inclusion severity, compared to standard techniques. Bryant, R., Carlson, K.D., Ou, S

  13. 2003 DRY BEAN YIELD TRIALS J.D. Kelly, J. Taylor, N. Blakely, B. Roman and P. O'Boyle

    E-Print Network [OSTI]

    test; a 42-entry standard red and pink bean test; a 12-entry standard vine cranberry test, and a 25-entry standard red and white kidney trial, a 20-entry standard bush cranberry test, a 64-entry variety in cranberry beans (72-entry) and kidney beans (100- entry). A 16-entry regional trial was conducted

  14. Brand Standards Brand StandardsBrand Standards

    E-Print Network [OSTI]

    Weber, David J.

    Brand Standards 6.6.11 #12;Brand StandardsBrand Standards VISUAL IDENTITY AND BRANDING INITIATIVE, the visual image presented to the public by the units of the University and UMMC often is confusing the organizations' public image under a cohesive, easily recognized visual identity that relies upon a common

  15. 2004 DRY BEAN YIELD TRIALS J.D. Kelly, B. Long, N. Blakely, and K. Terpstra

    E-Print Network [OSTI]

    vine cranberry test; 20-entry Tebo bean test; and a 25- entry Midwest Performance Trial with pintos trial, 16-entry preliminary kidney bean test; a 36-entry standard bush cranberry test, a 64-entry tolerance in cranberry beans. A 16-entry regional trial was conducted cooperatively in Presque Isle County

  16. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New York first adopted uniform interconnection standards in 1999 (see history below). The Standard Interconnection Requirements (SIR) have subsequently been amended several times since, most...

  17. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The Pennsylvania Public Utilities Commission was required to adopt interconnection standards and net-metering rules by the Alternative Energy Portfolio Standards Act of 2004.The PUC subsequently...

  18. Interconnection Standards

    Broader source: Energy.gov [DOE]

    The North Carolina Utilities Commission (NCUC) adopted comprehensive interconnection standards for distributed generation in June 2008. The NCUC standards, which are similar to the Federal Energy...

  19. High level waste storage tank farms/242-A evaporator standards/requirements identification document phase 1 assessment corrective actions/compliance schedule approval report

    SciTech Connect (OSTI)

    Biebesheimer, E.

    1996-09-30T23:59:59.000Z

    This document, the Standards/Requirements Identification Document (S/RID) Phase I Assessment Corrective Actions/Compliance Schedule Approval Report for the subject facility, contains the corrective actions required to bring the facility into compliance as a result of an Administrative Assessment to determine whether S/RID requirements are fully addressed by existing policies, plans or procedures. These actions are delineated in the Compliance Schedule Approvals which also contain; noncompliances, risks, compensatory measures, schedules for corrective actions, justifications for approval, and resource impacts.

  20. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In February 2004, the Wisconsin Public Service Commission adopted interconnection standards for distributed generation (DG) systems up to 15 megawatts (MW) in capacity. All investor-owned...

  1. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Virginia has two interconnection standards: one for net-metered systems and one for systems that are not net-metered.

  2. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In September 2007, the Washington Utilities and Transportation Commission (UTC) adopted interconnection standards for distributed generation (DG) systems up to 20 megawatts (MW) in capacity. The...

  3. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In December 2005, the Colorado Public Utilities Commission (PUC) adopted standards for net metering and interconnection, as required by Amendment 37, a renewable-energy ballot initiative approved...

  4. Interconnection Standards

    Broader source: Energy.gov [DOE]

    New Jersey's interconnection standards apply statewide to all electric distribution utilities, but not to the small number of municipal utilities and electric cooperatives in the state. The rules,...

  5. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Note: Legislation enacted in August 2012 required the Massachusetts Department of Public Utilities (DPU) to develop an enforceable, standard interconnection timeline for distributed generation...

  6. 2010 DRY BEAN YIELD TRIALS J.D. Kelly, E. Wright, N. Blakely, and J. Heilig

    E-Print Network [OSTI]

    quality trials for CONAGRA: 8-entry navyand 14-entrypinto. At Montcalm; bush cranberry test with 25 and great northern market classes and modest levels of white mold tolerance in cranberry and kidney bean trials. All trials except for kidney, cranberry and white mold, organic, and PLH were direct harvested

  7. Surface Water Quality Standards

    E-Print Network [OSTI]

    Wythe, Kathy

    2007-01-01T23:59:59.000Z

    recreational uses. ?The Commission will seek substantial additional public comment on any proposed changes to the standards before adopting them into the state admin- istrative code,? Davenport said. ?Because of the com- plexity and regulatory importance... Conservation Board?s state watershed coordinator, said the standards for contact recreation, with only a few exceptions, are uniformly applied regardless of water body type or the actual level of recreation use. ?Because a minimum of 10 water samples over a...

  8. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Oregon has three separate interconnection standards: one for net-metered systems, one for small generator facilities (non-net metered systems) and one for large generator facilities (non-net...

  9. Interconnection Standards

    Broader source: Energy.gov [DOE]

    South Dakota’s interconnection standards for distributed generation, adopted by the state Public Utilities Commission (PUC) in May 2009, apply to customers of investor-owned utilities.* The rules...

  10. Interconnection Standards

    Broader source: Energy.gov [DOE]

    Vermont has adopted separate interconnection standards for net-metered energy systems that are 150 kW or less, and for all other distributed-generation (DG) systems.

  11. Interconnection Standards

    Broader source: Energy.gov [DOE]

    In December 2003, the Nevada Public Utilities Commission (PUC) adopted interconnection standards for customers of NV Energy (formerly Nevada Power and Sierra Pacific Power) with on-site generation...

  12. Polarimetric Standardization

    E-Print Network [OSTI]

    E. Landi Degl'Innocenti; S. Bagnulo; L. Fossati

    2006-10-09T23:59:59.000Z

    The use of polarimetric techniques is nowadays widespread among solar and stellar astronomers. However, notwithstanding the recommandations that have often been made about the publication of polarimetric results in the astronomical literature, we are still far from having a standard protocol on which to conform. In this paper we review the basic definitions and the physical significance of the Stokes parameters, and we propose a standardization of the measurement of polarized radiation.

  13. CUT FLOWER VARIETY TRIALS, ITHACA, NY, 2004 H. C. Wien, Department of Horticulture, Cornell University

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    University. Standard varieties were supplied through the kindness of Johnny's Selected Seeds, and the Harris of each variety supplied for the trial, and there were two replications for each of the trials, maximum was unusually rainy and cool. Air and soil temperatures were monitored in the tunnel all season, as well as air

  14. Summary of IEEE Standard C37.90.2-1995 ``Withstand capability of relay systems to radiated electromagnetic interference from transceivers``

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    This paper describes the experience with the Trial Use Standard ANSI/IEEE C37.90.2-1987, the discussions in Working Group E2 of the Power System Relaying Committee, and the changes that have been made to the 1987 trial use standard before the 1995 standard was approved. The major change is a substantial increase in the required field strength, now 35 volts/meter vs. the previous 10--20 V/m. The 1987 Working Group requested feedback from those testing relays per the trial-use standard. In the Foreward to that document, comments were requested in the following areas: (1) Is the test relatively straightforward to perform? Describe problem(s) encountered. (2) Were the test procedures and test results easy to interpret? (3) Are the test results repeatable? (4) Does amplitude modulation or the keying test produce malfunctions not detected by the continuous wave test? Based on the comments received on these matters, and on the fundamental issue of RF test level, there was a clear need to revise and update the 1987 Standard.

  15. 1michigan state university brand STandardS BRAND STANDARDS

    E-Print Network [OSTI]

    1michigan state university brand STandardS BRAND STANDARDS VERSION 4, APRIL 30, 2012 #12;2michigan state university brand STandardS TABLE OF CONTENTS 3 brand baSicS 5 The Michigan STaTe UniverSiTy brandUrTher gUidance #12;3michigan state university brand STandardS 1. BrANd BASICS 1a whaT iS a brand? We build

  16. Standards, Ethics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassiveSubmittedStatus TomAbout » Staff Basic Energy Sciences (BES)Standards for

  17. The Standard Cosmological Model

    E-Print Network [OSTI]

    Douglas Scott

    2005-10-26T23:59:59.000Z

    The Standard Model of Particle Physics (SMPP) is an enormously successful description of high energy physics, driving ever more precise measurements to find "physics beyond the standard model", as well as providing motivation for developing more fundamental ideas that might explain the values of its parameters. Simultaneously, a description of the entire 3-dimensional structure of the present-day Universe is being built up painstakingly. Most of the structure is stochastic in nature, being merely the result of the particular realisation of the "initial conditions" within our observable Universe patch. However, governing this structure is the Standard Model of Cosmology (SMC), which appears to require only about a dozen parameters. Cosmologists are now determining the values of these quantities with increasing precision in order to search for "physics beyond the standard model", as well as trying to develop an understanding of the more fundamental ideas which might explain the values of its parameters. Although it is natural to see analogies between the two Standard Models, some intrinsic differences also exist, which are discussed here. Nevertheless, a truly fundamental theory will have to explain both the SMPP and SMC, and this must include an appreciation of which elements are deterministic and which are accidental. Considering different levels of stochasticity within cosmology may make it easier to accept that physical parameters in general might have a non-deterministic aspect.

  18. Standards for Protection Against Radiation (Michigan)

    Broader source: Energy.gov [DOE]

    This rule establishes standards for protection against radiation hazards. In addition to complying with requirements set forth, every reasonable effort should be made to maintain radiation levels...

  19. TECHNICAL SUPPORT DOCUMENT: ENERGY CONSERVATION STANDARDS FOR...

    Broader source: Energy.gov (indexed) [DOE]

    design measure than the levels ana The proposed efficiency standards will decrease air pollution b future energy demand. The greatest decreases in air pollution will oxides...

  20. September 2004 Standards Forum and Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    16 Cancellation in Progress - 3 Inside This Issue Visit the Technical Standards Program Web Site at http:tis.eh.doe.govtechstds September 2004 The Standards Forum and...

  1. 2005 DRY BEAN YIELD TRIALS J.D. Kelly, B. Long, N. Blakely, K. Terpstra, and E. Wright

    E-Print Network [OSTI]

    cranberry test; 36-entry Tebo bean test; and a 20-entry Midwest Performance Trial with pintos and great-entry preliminary kidney bean test; a 30-entry standard bush cranberry test; a 64-entry preliminary cranberry bean test; a 64-entry variety trial to evaluate reaction to white mold was grown under sprinkler

  2. Issues in Purchasing and Maintaining Intrinsic Standards

    SciTech Connect (OSTI)

    PETTIT,RICHARD B.; JAEGER,KLAUS; EHRLICH,CHARLES D.

    2000-09-12T23:59:59.000Z

    Intrinsic standards are widely used in the metrology community because they realize the best level uncertainty for many metrology parameters. For some intrinsic standards, recommended practices have been developed to assist metrologists in the selection of equipment and the development of appropriate procedures in order to realize the intrinsic standard. As with the addition of any new standard, the metrology laboratory should consider the pros and cons relative to their needs before purchasing the standard so that the laboratory obtains the maximum benefit from setting up and maintaining these standards. While the specific issues that need to be addressed depend upon the specific intrinsic standard and the level of realization, general issues that should be considered include ensuring that the intrinsic standard is compatible with the laboratory environment, that the standard is compatible with the current and future workload, and whether additional support standards will be required in order to properly maintain the intrinsic standard. When intrinsic standards are used to realize the best level of uncertainty for a specific metrology parameter, they usually require critical and important maintenance activities. These activities can including training of staff in the system operation, as well as safety procedures; performing periodic characterization measurements to ensure proper system operation; carrying out periodic intercomparisons with similar intrinsic standards so that proper operation is demonstrated; and maintaining control or trend charts of system performance. This paper has summarized many of these important issues and therefore should be beneficial to any laboratory that is considering the purchase of an intrinsic standard.

  3. FEDERAL INFORMATION PROCESSING STANDARD

    E-Print Network [OSTI]

    March 2004 FEDERAL INFORMATION PROCESSING STANDARD (FIPS) 199, STANDARDS FOR SECURITY Information Technology Laboratory National Institute of Standards and Technology A new Federal Information Processing Standard (FIPS), recently approved by the Secretary of Commerce, will help federal agencies

  4. Technology Development and Field Trials of EGS Drilling Systems...

    Broader source: Energy.gov (indexed) [DOE]

    Technology Development and Field Trials of EGS Drilling Systems Technology Development and Field Trials of EGS Drilling Systems Technology Development and Field Trials of EGS...

  5. The Standard Model Beyond the Standard Model

    E-Print Network [OSTI]

    physics with top quark Search for Extra-dimensions Conclusions 1 The Standard Model Building block quark Search for Extra-dimensions Conclusions Building block The particles and forces The Standard Model the Standard Model New physics with top quark Search for Extra-dimensions Conclusions Building block

  6. Environmental Standardization for Sustainability

    E-Print Network [OSTI]

    Bagby, John

    Environmental Standardization for Sustainability by Professor John W. Bagby College of Information that environmental controls are expressed as environmental standards, a traditional driver of investment in pollution control. Environmental standards spur investment in green technologies that promise to stimulate

  7. August 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    August 2007 1.5 DOE Technical Standards Published No entries were received in August 2007 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  8. July 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    in June 2007 1.5 DOE Technical Standards Published No entries were received in June 2007 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  9. October 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Project No. SAFT-0109 Continued on next page Standards Actions Page 2 October 2006 2.0 NON-GOVERNMENT STANDARDS ACTIONS 2.1 American National Standards Institute American...

  10. July 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    were received in June 2006. Continued on next page Standards Actions Page 2 July 2005 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  11. Communication Standards and Recommendations

    E-Print Network [OSTI]

    Communication Standards and Recommendations Introduction & Purpose 3 Standards & Recommendations Communication 4 Training 10 Evaluation 11 PMO Workgroup Participation 12 Staffing 12 Communications-related Tracking Grantee Portal Standards and Recommendations 13

  12. May 2008 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  13. May 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society...

  14. February 2001 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Technical Standards Program Document Status Visit the Technical Standards Program Web Site: http:tis.eh.doe.govtechstds Activity Summary In Conversion - 4 In Preparation...

  15. Energy Portfolio Standard

    Broader source: Energy.gov [DOE]

    Nevada established a renewable portfolio standard (RPS) as part of its 1997 restructuring legislation. Under the standard, NV Energy (formerly Nevada Power and Sierra Pacific Power) must use...

  16. Energy Efficiency Product Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  17. 2006 DRY BEAN YIELD TRIALS J.D. Kelly, B. Long, N. Blakely, K. Terpstra, E. Wright, and J. Wagner

    E-Print Network [OSTI]

    - entry preliminary red and pink test; a 16-entry standard vine cranberry test; 30-entry Tebo bean test standard bush cranberry test; a 25-entry preliminary cranberry bean test; a 64-entry variety trial in the kidney and cranberry nurseries and the delay in harvest due to wet conditions in September and October

  18. Facilities Management CAD Standards

    E-Print Network [OSTI]

    Brownstone, Rob

    Facilities Management CAD Standards 2011 #12;Facilities Management CAD Standards Providing: Layering Standards 2.1 Layer Name Format 2.2 Layer Name Modifiers 2.3 Layer Attributes 2.4 Special Layer of PDF and DWG Files APPENDIX A: DAL FM CAD Standard Layers APPENDIX B: DAL FM CAD Special Layers

  19. Standard 90, the planning

    SciTech Connect (OSTI)

    Not Available

    1985-10-01T23:59:59.000Z

    In order to understand the current proposed ANS/ASHRAE/IES Standard 90.1 Energy Efficient Design of New Non-Residential Buildings and New High-Rise, Residential Buildings, this article offers background on the initial Standard, the organization of the Standard committee, and the objectives established for the proposed Standard 90.1.

  20. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1999-11-19T23:59:59.000Z

    The Technical Standards Program (TSP) promotes the use of voluntary consensus standards by the Department of Energy (DOE), provides DOE with the means to develop needed technical standards, and manages overall technical standards information, activities, issues, and interactions. Cancels DOE O 1300.2A. Canceled by DOE O 252.1A

  1. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The Order promotes DOE's use of Voluntary Consensus Standards (VCS) as the primary method for application of technical standards and establishes and manages the DOE Technical Standards Program (TSP) including technical standards development, information, activities, issues, and interactions. Admin Chg 1 dated 3-12-13.

  2. Environmental Services Standard Tasks

    E-Print Network [OSTI]

    1 Environmental Services Operations Standard Tasks The primary function of Environmental Services developed and implemented standard custodial tasks that meet industry standards. The standards are as follows: Exterior Building Cleaning Daily Clean ash urns Clean entry area glass Clean steps and remove

  3. 2002 DRY BEAN YIELD TRIALS J.D. Kelly, J. Taylor, N. Blakely, M. Ender, B. Roman and P. O'Boyle

    E-Print Network [OSTI]

    and pink bean test; a 25-entry preliminary red and pink test, a 15-entry standard vine cranberry test. These included a 36-entry standard red and white kidney trial, a 36-entry standard bush cranberry test, a 64/acre, and bush cranberry exceeded 45 cwt/acre. Productivity of kidney beans was lower (35 cwt/acre). Many

  4. Campus Outdoor Lighting Standards The following standards provide for minimum safe lighting standards for outdoor area of

    E-Print Network [OSTI]

    de Lijser, Peter

    Campus Outdoor Lighting Standards The following standards provide for minimum safe lighting with a minimum of 3 foot candles. This lighting level is for daytime and at night. Public Streets Streets must have a minimum of one foot candles average with a minimum of .6 foot candles. Augmented lighting should

  5. China Cools with Tighter RAC Standards

    SciTech Connect (OSTI)

    Lin, Jiang; Rosenquist, Gregory

    2006-06-01T23:59:59.000Z

    After boiling summer brought brown-out to most part of the country in 2004, China announced a new set of minimum energy efficiency standards for room air conditioners in September 2004, with the first tier going into effect on March 1, 2005 and the reach standard taking effect on January 1, 2009. This represents a milestone in China's standard setting process since the reach standard levels are significantly more stringent than previous standards for other appliances. This paper first analyzes cost-effectiveness of China's new standards for room air conditioners, and then attempts to evaluate the impact of the new standards on energy savings, electric generation capacity, and CO2 emissions reductions.

  6. Residential ventilation standards scoping study

    SciTech Connect (OSTI)

    McKone, Thomas E.; Sherman, Max H.

    2003-10-01T23:59:59.000Z

    The goals of this scoping study are to identify research needed to develop improved ventilation standards for California's Title 24 Building Energy Efficiency Standards. The 2008 Title 24 Standards are the primary target for the outcome of this research, but this scoping study is not limited to that timeframe. We prepared this scoping study to provide the California Energy Commission with broad and flexible options for developing a research plan to advance the standards. This document presents the findings of a scoping study commissioned by the Public Interest Energy Research (PIER) program of the California Energy Commission to determine what research is necessary to develop new residential ventilation requirements for California. This study is one of three companion efforts needed to complete the job of determining the ventilation needs of California residences, determining the bases for setting residential ventilation requirements, and determining appropriate ventilation technologies to meet these needs and requirements in an energy efficient manner. Rather than providing research results, this scoping study identifies important research questions along with the level of effort necessary to address these questions and the costs, risks, and benefits of pursuing alternative research questions. In approaching these questions and corresponding levels of effort, feasibility and timing were important considerations. The Commission has specified Summer 2005 as the latest date for completing this research in time to update the 2008 version of California's Energy Code (Title 24).

  7. Detailed Information Standard

    E-Print Network [OSTI]

    Culviner, Peter

    2010-12-05T23:59:59.000Z

    The purpose of this standard is to increase the required information that must accompany any parts submitted to the Registry of Standard Biological Parts. This will give users of the parts better assurance of their ...

  8. Clothing Quality Standards

    E-Print Network [OSTI]

    2006-05-01T23:59:59.000Z

    Clothing construction is a creative skill with certain standards for appearance and construction. This publication describes the standards that apply to general construction techniques such as preparing the fabric, creating darts and gathers...

  9. April 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    and Injury Surveillance Program Guidelines, 03222007; DOE-STD-1190-2007, OCSH-0005 2.0 Non-Government Standards Actions 2.1 American National Standards Institute (ANSI)...

  10. Puerto Rico- Interconnection Standards

    Broader source: Energy.gov [DOE]

    In 2007, the Autoridad de Energía Electrica de Puerto Rico (PREPA*) adopted interconnection standards based on the standard contained in the federal Energy Policy Act of 2005. PREPA promulgated...

  11. SORORITY LIFE COMMUNITY STANDARDS

    E-Print Network [OSTI]

    Hone, James

    & FRATERNITY SORORITY LIFE COMMUNITY STANDARDS & GREEK JUDICIAL BOARD HANDBOOK 2013 OFFICE Judicial Board Handbook 2 I. COMMUNITY STANDARDS Fraternity & Sorority Life is one of the most rewarding Councils have standards of conduct for all chapters and their members. It is the responsibilty of every

  12. Standard practice for prediction of the long-term behavior of materials, including waste forms, used in engineered barrier systems (EBS) for geological disposal of high-level radioactive waste

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2007-01-01T23:59:59.000Z

    1.1 This practice describes test methods and data analyses used to develop models for the prediction of the long-term behavior of materials, such as engineered barrier system (EBS) materials and waste forms, used in the geologic disposal of spent nuclear fuel (SNF) and other high-level nuclear waste in a geologic repository. The alteration behavior of waste form and EBS materials is important because it affects the retention of radionuclides by the disposal system. The waste form and EBS materials provide a barrier to release either directly (as in the case of waste forms in which the radionuclides are initially immobilized), or indirectly (as in the case of containment materials that restrict the ingress of groundwater or the egress of radionuclides that are released as the waste forms and EBS materials degrade). 1.1.1 Steps involved in making such predictions include problem definition, testing, modeling, and model confirmation. 1.1.2 The predictions are based on models derived from theoretical considerat...

  13. Clinical trials of radiosensitizers: what should we expect

    SciTech Connect (OSTI)

    Brown, J.M.

    1984-03-01T23:59:59.000Z

    The lack of positive results from the clinical trials undertaken so far with misonidazole (MISO) are widely considered as disappointing. This is leading to a growing sentiment that hypoxic cells may not be a significant limitation to local control of human tumors. To examine whether this is a reasonable conclusion, the relevant in vitro and in vivo data have been summarized so that predictions of the extent of radiosensitization of the hypoxic cells can be made from a knowledge of the clinically achievable levels of MISO. The in vitro and in vivo data with radiosensitizers suggest that only a small effect, if any, is likely to be demonstrated in the clinical trials with MISO, even for those tumors the control of which is limited by hypoxic cells. Thus the question of whether hypoxic cells may or may not limit the local control of tumors by radiotherapy has not been addressed adequately by the presently available radiosensitizing drugs.

  14. Standardizing Naming Conventions in Radiation Oncology

    SciTech Connect (OSTI)

    Santanam, Lakshmi [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Hurkmans, Coen [Department of Radiation Oncology, Catharina Hospital, Eindhoven (Netherlands); Mutic, Sasa [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Vliet-Vroegindeweij, Corine van [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Brame, Scott; Straube, William [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Galvin, James [Department of Radiation Oncology, Thomas Jefferson University Hospital, Philadelphia, PA (United States); Tripuraneni, Prabhakar [Department of Radiation Oncology, Scripps Clinic, LaJolla, CA (United States); Michalski, Jeff [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Bosch, Walter, E-mail: wbosch@radonc.wustl.edu [Department of Radiation Oncology, Washington University School of Medicine, St. Louis, MO (United States); Advanced Technology Consortium, Image-guided Therapy QA Center, St. Louis, MO (United States)

    2012-07-15T23:59:59.000Z

    Purpose: The aim of this study was to report on the development of a standardized target and organ-at-risk naming convention for use in radiation therapy and to present the nomenclature for structure naming for interinstitutional data sharing, clinical trial repositories, integrated multi-institutional collaborative databases, and quality control centers. This taxonomy should also enable improved plan benchmarking between clinical institutions and vendors and facilitation of automated treatment plan quality control. Materials and Methods: The Advanced Technology Consortium, Washington University in St. Louis, Radiation Therapy Oncology Group, Dutch Radiation Oncology Society, and the Clinical Trials RT QA Harmonization Group collaborated in creating this new naming convention. The International Commission on Radiation Units and Measurements guidelines have been used to create standardized nomenclature for target volumes (clinical target volume, internal target volume, planning target volume, etc.), organs at risk, and planning organ-at-risk volumes in radiation therapy. The nomenclature also includes rules for specifying laterality and margins for various structures. The naming rules distinguish tumor and nodal planning target volumes, with correspondence to their respective tumor/nodal clinical target volumes. It also provides rules for basic structure naming, as well as an option for more detailed names. Names of nonstandard structures used mainly for plan optimization or evaluation (rings, islands of dose avoidance, islands where additional dose is needed [dose painting]) are identified separately. Results: In addition to its use in 16 ongoing Radiation Therapy Oncology Group advanced technology clinical trial protocols and several new European Organization for Research and Treatment of Cancer protocols, a pilot version of this naming convention has been evaluated using patient data sets with varying treatment sites. All structures in these data sets were satisfactorily identified using this nomenclature. Conclusions: Use of standardized naming conventions is important to facilitate comparison of dosimetry across patient datasets. The guidelines presented here will facilitate international acceptance across a wide range of efforts, including groups organizing clinical trials, Radiation Oncology Institute, Dutch Radiation Oncology Society, Integrating the Healthcare Enterprise, Radiation Oncology domain (IHE-RO), and Digital Imaging and Communication in Medicine (DICOM).

  15. Standard and non-standard primordial neutrinos

    E-Print Network [OSTI]

    P. D. Serpico

    2006-08-14T23:59:59.000Z

    The standard cosmological model predicts the existence of a cosmic neutrino background with a present density of about 110 cm^{-3} per flavour, which affects big-bang nucleosynthesis, cosmic microwave background anisotropies, and the evolution of large scale structures. We report on a precision calculation of the cosmic neutrino background properties including the modification introduced by neutrino oscillations. The role of a possible neutrino-antineutrino asymmetry and the impact of non-standard neutrino-electron interactions on the relic neutrinos are also briefly discussed.

  16. Dawdon Mine Water Heat Pump Trial

    E-Print Network [OSTI]

    Oak Ridge National Laboratory

    14-Dec-12 Dawdon Mine Water Heat Pump Trial #12;14 December 2012 2 Potential for Mine Water sourced heating Dawdon heat pump trial A demonstration project Contents #12;Friday, 14 December 2012 3 The UK salinity High Iron (removed by lime treatment) Offices , 8 rooms #12;Dawdon heat pump Warm mine water

  17. Montana Statewide Spring Canola Variety Trial

    E-Print Network [OSTI]

    Dyer, Bill

    2013 Montana Statewide Spring Canola Variety Trial #12;Table of Contents: Page Project personnel ..........................................................................................................10-17 #12;2 Montana Statewide Spring Canola Variety Trial, 2013 Project Leader: Brooke Bohannon Canola Variety Evaluation. #12;4 Montana State University, College of Agriculture, Montana Agricultural

  18. Montana Statewide Spring Canola Variety Trial

    E-Print Network [OSTI]

    Dyer, Bill

    1 2012 Montana Statewide Spring Canola Variety Trial #12;1 Table of Contents: Page Project ..........................................................................................................12-29 #12;2 Montana Statewide Spring Canola Variety Trial, 2012 Project Leader: Brooke Bohannon@landolakes.com Bayer CropScience InVigor L120 H LL Mr. Jordan Varberg InVigor L130 H LL Hybrid Canola Marketing

  19. CAD Standards Guideline rev July 28, 2011 CAD Standards Guideline

    E-Print Network [OSTI]

    Hanson, Stephen José

    CAD Standards Guideline rev July 28, 2011 1 CAD Standards;CAD Standards Guideline rev July 28, 2011 2 TABLE OF CONTENTS INTRODUCTION (pg.3) CAD Standards Survey/GIS Standards Design Standards 1.0.0 CAD STANDARDS CHECKLIST (pg.4) 2.0.0 CAD

  20. CONVERSION OF DOE TECHNICAL STANDARDS TO NON-GOVERNMENT STANDARDS

    Broader source: Energy.gov [DOE]

    PurposeThis procedure provides guidance on the conversion of DOE Technical Standards to Voluntary Consensus Standards (VCSs), also referred to as non-Government standards

  1. National Certification Standard

    Broader source: Energy.gov (indexed) [DOE]

    Standard for the Geothermal Heat Pump Industry Principal Investigator John Kelly Geothermal Heat Pump Consortium GSHP Demonstration Projects May 18, 2010 This...

  2. Appliance Standards Resources

    Broader source: Energy.gov [DOE]

    The federal government, and some states, have established minimum efficiency standards for certain appliances and equipment, such as refrigerators and clothes washers.

  3. Distributed Generation Standard Contracts

    Broader source: Energy.gov [DOE]

    '''''Note: The second enrollment period for standard contracts in 2013 closed June 28. The third is scheduled to begin in September.'''''

  4. State Building Energy Standards

    Broader source: Energy.gov [DOE]

    In June 2007, South Carolina enacted legislation (the Energy Independence and Sustainable Construction Act of 2007) to promote effective energy and environmental standards for construction,...

  5. November 2000 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    19, 2000. IEEE 1379-2000, Recommended Practice for Data Com- munications Between Remote Terminal Units and Intelligent Electronic Devices in a Substation (new standard) -...

  6. November 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection...

  7. November 2006 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Actions 2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National...

  8. October 2007 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National...

  9. February 2008 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    2 American National Standards Institute (ANSI) 2 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American Nuclear Society (ANS) 2 National Fire Protection...

  10. Standard Subject Classification System

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1979-08-14T23:59:59.000Z

    The order establishes the DOE Standard Subject Classification System for classifying documents and records by subject, including correspondence, directives, and forms.Cancels DOE O 0000.1.

  11. Energy Conservation Standards Activities

    Broader source: Energy.gov (indexed) [DOE]

    Report to Congress August 2014 United States Department of Energy Washington, DC 20585 Energy Conservation Standards Activities Report to Congress | Page i Message from the...

  12. Standards Actions, October 2000

    Broader source: Energy.gov (indexed) [DOE]

    61326-1-am2-2000, Electrical equipment for measure- ment, control and laboratory use - EMC requirements - Part 1: General requirements. American National Standards Projects...

  13. Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    Under Hawaii's Renewable Portfolio Standard (RPS), each electric utility company that sells electricity for consumption in Hawaii must establish the following percentages of "renewable electrical...

  14. ORISE: Standards development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of industry standards that provide guidance and support to decontamination and decommissioning projects across the United States. Because of our extensive experience...

  15. The Standard Model

    ScienceCinema (OSTI)

    Lincoln, Don

    2014-08-12T23:59:59.000Z

    Fermilab scientist Don Lincoln describes the Standard Model of particle physics, covering both the particles that make up the subatomic realm and the forces that govern them.

  16. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    Rhode Island's Renewable Energy Standard (RES), established in June 2004, requires the state's retail electricity providers -- including non-regulated power producers and distribution companies --...

  17. Incorporating Experience Curves in Appliance Standards Analysis

    SciTech Connect (OSTI)

    Garbesi, Karina; Chan, Peter; Greenblatt, Jeffery; Kantner, Colleen; Lekov, Alex; Meyers, Stephen; Rosenquist, Gregory; Buskirk, Robert Van; Yang, Hung-Chia; Desroches, Louis-Benoit

    2011-10-31T23:59:59.000Z

    The technical analyses in support of U.S. energy conservation standards for residential appliances and commercial equipment have typically assumed that manufacturing costs and retail prices remain constant during the projected 30-year analysis period. There is, however, considerable evidence that this assumption does not reflect real market prices. Costs and prices generally fall in relation to cumulative production, a phenomenon known as experience and modeled by a fairly robust empirical experience curve. Using price data from the Bureau of Labor Statistics, and shipment data obtained as part of the standards analysis process, we present U.S. experience curves for room air conditioners, clothes dryers, central air conditioners, furnaces, and refrigerators and freezers. These allow us to develop more representative appliance price projections than the assumption-based approach of constant prices. These experience curves were incorporated into recent energy conservation standards for these products. The impact on the national modeling can be significant, often increasing the net present value of potential standard levels in the analysis. In some cases a previously cost-negative potential standard level demonstrates a benefit when incorporating experience. These results imply that past energy conservation standards analyses may have undervalued the economic benefits of potential standard levels.

  18. Technology Development and Field Trials of EGS Drilling Systems...

    Broader source: Energy.gov (indexed) [DOE]

    Technology Development and Field Trials of EGS Drilling Systems Technology Development and Field Trials of EGS Drilling Systems Project objective: Development of drilling systems...

  19. Global residential appliance standards

    SciTech Connect (OSTI)

    Turiel, I.; McMahon, J.E. (Lawrence Berkeley Lab., CA (United States)); Lebot, B. (Agence Francaise pour la Maitrise de l'Energie, Valbonne (France))

    1993-03-01T23:59:59.000Z

    In most countries, residential electricity consumption typically ranges from 20% to 40% of total electricity consumption. This energy is used for heating, cooling, refrigeration and other end-uses. Significant energy savings are possible if new appliance purchases are for models with higher efficiency than that of existing models. There are several ways to ensure or encourage such an outcome, for example, appliance rebates, innovative procurement, and minimum efficiency standards. This paper focuses on the latter approach. At the present time, the US is the only country with comprehensive appliance energy efficiency standards. However, many other countries, such as Australia, Canada, the European Community (EC), Japan and Korea, are considering enacting standards. The greatest potential impact of minimum efficiency standards for appliances is in the developing countries (e.g., China and India), where saturations of household appliances are relatively low but growing rapidly. This paper discusses the potential savings that could be achieved from global appliance efficiency standards for refrigerators and freezers. It also could be achieved from global appliance efficiency standards for refrigerators and freezers. It also discusses the impediments to establishing common standards for certain appliance types, such as differing test procedures, characteristics, and fuel prices. A methodology for establishing global efficiency standards for refrigerators and freezers is described.

  20. Introduction Format Proprietaire -Standard

    E-Print Network [OSTI]

    Monnier, Stefan

    Code for Information Interchange) 4. Unicode IFT-1215 Stefan Monnier 7 #12;BCD IFT-1215 Stefan MonnierSOMMAIRE Introduction Format Propri´etaire -Standard Code Alphanum´erique Entr´ee Alphanum : !, ?, ", (, . . . · Caract`eres sp´eciaux : *, $, ¿, . . . Quelques standards utilis´es pour les coder en binaires 1. BCD

  1. MODEL CONSERVATION STANDARD INTRODUCTION

    E-Print Network [OSTI]

    programs, the standard for all new commercial buildings, the standard for utility commercial conservation RESIDENTIAL AND COMMERCIAL BUILDINGS The region should acquire all electric energy conservation measure savings from new residential and new commercial buildings that have a benefit-to-cost ratio greater than

  2. Maintaining Standards: Differences between the Standard Deviation and Standard Error, and

    E-Print Network [OSTI]

    California at Santa Cruz, University of

    Maintaining Standards: Differences between the Standard Deviation and Standard Error, and When to Use Each David L Streiner, PhD1 Many people confuse the standard deviation (SD) and the standard error of the findings. (Can J Psychiatry 1996;41:498­502) Key Words: statistics, standard deviation, standard error

  3. North American Standard Level VI Inspection Program Update: Ensuring...

    Office of Environmental Management (EM)

    Ensuring Safe Transportation of Radioactive Material Presentation made by Carlisle Smith for the NTSF annual meeting held from May 14-16, 2013 in Buffalo, NY North American...

  4. North American Standard Level VI Inspection Program Update: Ensuring Safe

    Office of Environmental Management (EM)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "of Energy Power.pdf11-161-LNG |September 15, 2010 PrintingNeed forNews »Department ofMeeting

  5. DOE Coordination Meeting CODES & STANDARDS

    E-Print Network [OSTI]

    of the International Standards Organization's standards for hydrogen refueling and storage, by 2006; · Complete. Provide technical resources to harmonize the development of international standards among IEC, ISO negotiations with critical Standard Development Organizations and develop draft generic licensing agreement

  6. STANDARD OF CARE FOR BLASTING Timothy D. Stark1

    E-Print Network [OSTI]

    STANDARD OF CARE FOR BLASTING NEGLIGENCE By Timothy D. Stark1 ABSTRACT: Blasters are usually but should be liable only if their conduct is proven to be negligent. This change in legal standard be related to the level of care exercised by the blaster. It is anticipated that a negligence standard

  7. 1 INTRODUCTION The IFC standard (IAI 2006) has been incorporated

    E-Print Network [OSTI]

    Amor, Robert

    to describe aspects of a building and their relation- ships to each other. The standard also allows the building. The IFC standard provides for unfettered transfer of semantic information between the major, Auckland, New Zealand ABSTRACT: The development of high-level standard representations of buildings has

  8. DOE technical standards list. Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  9. Sonication standard laboratory module

    DOE Patents [OSTI]

    Beugelsdijk, Tony (Los Alamos, NM); Hollen, Robert M. (Los Alamos, NM); Erkkila, Tracy H. (Los Alamos, NM); Bronisz, Lawrence E. (Los Alamos, NM); Roybal, Jeffrey E. (Santa Fe, NM); Clark, Michael Leon (Menan, ID)

    1999-01-01T23:59:59.000Z

    A standard laboratory module for automatically producing a solution of cominants from a soil sample. A sonication tip agitates a solution containing the soil sample in a beaker while a stepper motor rotates the sample. An aspirator tube, connected to a vacuum, draws the upper layer of solution from the beaker through a filter and into another beaker. This beaker can thereafter be removed for analysis of the solution. The standard laboratory module encloses an embedded controller providing process control, status feedback information and maintenance procedures for the equipment and operations within the standard laboratory module.

  10. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1999-05-01T23:59:59.000Z

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  11. EPCglobal : a universal standard

    E-Print Network [OSTI]

    Aguirre, Juan Ignacio

    2007-01-01T23:59:59.000Z

    This thesis evaluates the likelihood of EPCglobal becoming the universal RFID standard by presenting a framework of ten factors used to analyze and determine if EPCglobal is moving in the right direction. The ten factors ...

  12. Renewable Resource Standard

    Broader source: Energy.gov [DOE]

    Montana’s renewable portfolio standard (RPS), enacted in April 2005 as part of the Montana Renewable Power Production and Rural Economic Development Act, requires public utilities and competitive...

  13. August 2001 Standards Actions

    Broader source: Energy.gov (indexed) [DOE]

    ASME A120.1-1996) - July 3, 2001. ANSIASTM D4382-01, Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graph- ite Furnace (new standard) - May 10, 2001....

  14. Renewable Portfolio Standard

    Broader source: Energy.gov [DOE]

    The New York Public Service Commission (PSC) adopted a renewable portfolio standard (RPS) in September 2004 and issued implementation rules in April 2005. As originally designed, New York's RPS had...

  15. Low Carbon Fuel Standards

    E-Print Network [OSTI]

    Sperling, Dan; Yeh, Sonia

    2009-01-01T23:59:59.000Z

    S O N I A YE H Low Carbon Fuel Standards The most direct andalternative transportation fuels is to spur innovation withstandard for upstream fuel producers. hen it comes to energy

  16. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    California’s Renewables Portfolio Standard (RPS) was originally established by legislation enacted in 2002. Subsequent amendments to the law have resulted in a requirement for California’s...

  17. Technical Standards Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-02-23T23:59:59.000Z

    The order establishes the DOE Technical Standards Program. Cancels DOE O 252.1 and DOE G 252.1-1. Admin Chg 1, dated 3-12-13 cancels DOE O 252.1A.

  18. Reliability Standards Owner

    Broader source: Energy.gov [DOE]

    This position is located in the Internal Operations and Asset Management group of Planning and Asset Management (TP). A successful candidate in this position will serve as the Reliability Standards...

  19. FREIGHT CONTAINER LIFTING STANDARD

    SciTech Connect (OSTI)

    POWERS DJ; SCOTT MA; MACKEY TC

    2010-01-13T23:59:59.000Z

    This standard details the correct methods of lifting and handling Series 1 freight containers following ISO-3874 and ISO-1496. The changes within RPP-40736 will allow better reading comprehension, as well as correcting editorial errors.

  20. Renewable Energy Standard

    Broader source: Energy.gov [DOE]

    In November 2006, the Arizona Corporation Commission (ACC) adopted [http://images.edocket.azcc.gov/docketpdf/0000063561.pdf final rules] to expand the state's Renewable Energy Standard (RES) to 15%...

  1. Standardization of Firearms

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2000-03-02T23:59:59.000Z

    Establishes Department of Energy (DOE) requirements for the standardization of firearms and limitations of firearms inventories maintained in support of safeguards and security activities. Does not cancel other directives.

  2. Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    In January 2005, the District of Columbia Council enacted a renewable portfolio standard (RPS) that applies to all retail electricity sales in the District. In October 2008 the RPS was amended by...

  3. Standards Actions - May 2000

    Broader source: Energy.gov (indexed) [DOE]

    dard) - February 11, 2000. ANSIUL 80-2000, Standard for Safety for Steel Tanks for Oil-Burner Fuel (revision of ANSIUL 80-1992) - March 15, 2000. The following international...

  4. SAE Standards Support

    SciTech Connect (OSTI)

    Gowri, Krishnan

    2012-11-01T23:59:59.000Z

    This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: • Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication • Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

  5. 2009 DRY BEAN YIELD TRIALS J.D. Kelly, E. Wright, N. Blakely, and J. Heilig

    E-Print Network [OSTI]

    test that includes pinto, GN, red and pinks. At Montcalm, bush cranberry test with 36 entries; kidney, cranberry and white mold, organic, and PLH were direct harvested using new self-propelled plot combine and modest levels of white mold tolerance in the cranberry bean trials. With few exceptions the highest

  6. IX. Standards for Student Organizations Standards of all Student Organizations

    E-Print Network [OSTI]

    Marsh, David

    1 of 8 IX. Standards for Student Organizations Standards of all Student Organizations As stated to the same standards of conduct to which students are held on an individual basis. Standards for Fraternities on February 25, 1976 - the University has developed the following standards for fraternity/sorority life

  7. Department of Energy Standards Index

    SciTech Connect (OSTI)

    NONE

    1995-08-01T23:59:59.000Z

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  8. Nonadherence to treatment protocol in published randomised controlled trials: a review

    E-Print Network [OSTI]

    Dodd, Susanna; White, Ian R; Williamson, Paula

    2012-06-18T23:59:59.000Z

    (50%) - 12 (55%) [17 (77%)]a 31 (47%) [51 (77%)]a - 1 (50%)b 21 (47%)b - 0 (0%)c 0 (0%)c - 5 (23%)d 22 (33%) [28 (42%)]d - - - - - - eported] on persistence or completion of randomised treatment. bNumber of treatment (2) is used as denominator for %. c... of departure from treatment protocol across trials is not straightforward, as trials dif- fered greatly in terms of type and duration of interven- tion, definitions used to define nonadherence and level ring treatment) 1 1 2 ertain event(s)c - 6 6 ompleted...

  9. DOE technical standards list: Department of Energy standards index

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  10. Standard guide for sampling radioactive tank waste

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2011-01-01T23:59:59.000Z

    1.1 This guide addresses techniques used to obtain grab samples from tanks containing high-level radioactive waste created during the reprocessing of spent nuclear fuels. Guidance on selecting appropriate sampling devices for waste covered by the Resource Conservation and Recovery Act (RCRA) is also provided by the United States Environmental Protection Agency (EPA) (1). Vapor sampling of the head-space is not included in this guide because it does not significantly affect slurry retrieval, pipeline transport, plugging, or mixing. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  11. The University of Edinburgh Space Temperature Standards

    E-Print Network [OSTI]

    Edinburgh, University of

    The University of Edinburgh Space Temperature Standards Addendum to the Energy Policy 2003C causes an estimated 8% extra energy costs / global warming gas emissions. Comfort Levels: Summer, lights and / or solar gain and all other options have been exhausted · Temperature control is required

  12. Derived Concentration Technical Standard

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2011-05-05T23:59:59.000Z

    This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection

  13. Hydrogen Production CODES & STANDARDS

    E-Print Network [OSTI]

    Hydrogen Production DELIVERY FUEL CELLS STORAGE PRODUCTION TECHNOLOGY VALIDATION CODES & STANDARDS for 2010 · Reduce the cost of distributed production of hydrogen from natural gas and/or liquid fuels to $1 SYSTEMS INTEGRATION / ANALYSES SAFETY EDUCATION RESEARCH & DEVELOPMENT Economy Pete Devlin #12;Hydrogen

  14. Standard Nine: Financial Resources

    E-Print Network [OSTI]

    Snider, Barry B.

    105 Standard Nine: Financial Resources Overview The 1996 NEASC team report was critical of Brandeis's financial management, and focused on the need to increase financial resources, improve faculty and staff displays the University resource profile for FY1995 compared to the FY2005 profile. During this decade

  15. FACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES

    E-Print Network [OSTI]

    Laughlin, Robert B.

    to the repair of hydraulic turbine runners and large pump impellers. Reclamation operates and maintains a wideFACILITIES INSTRUCTIONS, STANDARDS, & TECHNIQUES VOLUME 2-5 TURBINE REPAIR Internet Version variety of reaction and impulse turbines as well as axial flow, mixed flow, radial flow pumps and pump

  16. DOE standard: Radiological control

    SciTech Connect (OSTI)

    Not Available

    1999-07-01T23:59:59.000Z

    The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for implementing occupational radiological control programs. DOE has established regulatory requirements for occupational radiation protection in Title 10 of the Code of Federal Regulations, Part 835 (10 CFR 835), ``Occupational Radiation Protection``. Failure to comply with these requirements may lead to appropriate enforcement actions as authorized under the Price Anderson Act Amendments (PAAA). While this Standard does not establish requirements, it does restate, paraphrase, or cite many (but not all) of the requirements of 10 CFR 835 and related documents (e.g., occupational safety and health, hazardous materials transportation, and environmental protection standards). Because of the wide range of activities undertaken by DOE and the varying requirements affecting these activities, DOE does not believe that it would be practical or useful to identify and reproduce the entire range of health and safety requirements in this Standard and therefore has not done so. In all cases, DOE cautions the user to review any underlying regulatory and contractual requirements and the primary guidance documents in their original context to ensure that the site program is adequate to ensure continuing compliance with the applicable requirements. To assist its operating entities in achieving and maintaining compliance with the requirements of 10 CFR 835, DOE has established its primary regulatory guidance in the DOE G 441.1 series of Guides. This Standard supplements the DOE G 441.1 series of Guides and serves as a secondary source of guidance for achieving compliance with 10 CFR 835.

  17. The Standards Forum, June 2001

    Broader source: Energy.gov (indexed) [DOE]

    (Uranium- Plutonium) Dioxide Pellets (revised standard). * C 1052-96, Practice for Bulk Sampling of Liquid Ura- nium Hexafluoride (revised standard). * C 1128-95, Guide for...

  18. A Standard for Neuroscience Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    a standard neuroscience file format. And BrainFormat, a neuroscience data standardization framework developed at the Lawrence Berkeley National Laboratory (Berkeley Lab),...

  19. Water Quality Standards Implementation (Oklahoma)

    Broader source: Energy.gov [DOE]

    The Oklahoma Department of Environmental Quality regulates Oklahoma's Water Quality Standards. The law states the requirements and standards for point source discharges. It also establishes...

  20. Active Technical Standards Managers List

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    TECHNICAL STANDARDS PROGRAM ASSIGNMENT TELEPHONEFAXEMAIL NAME DOE FACILITYADDRESS LOC CODE AU-30 Jeff D. Feit DOE Technical Standards Program, Manager U.S. Department of Energy...

  1. Energy Efficiency Standards for Appliances

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  2. Appliance and Equipment Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  3. Standard Reference Material 1751: Gallium Melting-Point Standard

    E-Print Network [OSTI]

    Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse NIST Special Publication 260-157 #12;#12;NIST Special Publication 260-157 XXXX Standard Reference Material 1751: Gallium Melting-Point Standard Gregory F. Strouse Chemical Science and Technology Laboratory Process Measurements

  4. Emissions Standards and Ambient Environmental Quality Standards in

    E-Print Network [OSTI]

    Silver, Whendee

    Emissions Standards and Ambient Environmental Quality Standards in Stochastic Receiving Media quality standards, for in- stance SO2 emissions are capped under Title IV of the U.S. Clean Air Act Amendments while ambient SO2 concentrations are limited under National Ambient Air Quality Standards (NAAQS

  5. hat is the Standardized Patient? The University of Windsor standardized

    E-Print Network [OSTI]

    hat is the Standardized Patient? The University of Windsor standardized patient program developed out of a need to standardized case scenarios for evaluation in nursing. Since its inception, the program has evolved and standardized patients (SPs) are now included in nursing curriculum with first

  6. Efficiency of appliance models on the market before and after DOE standards

    SciTech Connect (OSTI)

    Meyers, Stephen

    2004-06-15T23:59:59.000Z

    Energy efficiency standards for appliances mandate that appliance manufacturers not manufacture or import models that have a test energy efficiency below a specified level after the standard effective date. Thus, appliance standards set a floor for energy efficiency. But do they also induce more significant changes in the efficiencies that manufacturers offer after the standard becomes effective? To address this question, we undertook an examination of before-standard and after-standard efficiency of models on the market for three products: (1) Refrigerators (1990, 1993, and 2001 standards); (2) Room air conditioners (1990 and 2000 standards); and (3) Gas furnaces (1992 standard).

  7. Standardized radiological dose evaluations

    SciTech Connect (OSTI)

    Peterson, V.L.; Stahlnecker, E.

    1996-05-01T23:59:59.000Z

    Following the end of the Cold War, the mission of Rocky Flats Environmental Technology Site changed from production of nuclear weapons to cleanup. Authorization baseis documents for the facilities, primarily the Final Safety Analysis Reports, are being replaced with new ones in which accident scenarios are sorted into coarse bins of consequence and frequency, similar to the approach of DOE-STD-3011-94. Because this binning does not require high precision, a standardized approach for radiological dose evaluations is taken for all the facilities at the site. This is done through a standard calculation ``template`` for use by all safety analysts preparing the new documents. This report describes this template and its use.

  8. Southern California Trial Plantings of Eucalyptus1

    E-Print Network [OSTI]

    Standiford, Richard B.

    Southern California Trial Plantings of Eucalyptus1 Paul W. Moore2 Following the Arab oil embargo to the Oregon border on the north. E. camaldulensis and its closely allied species E. teretecornis dominated times with 9 trees planted 3 X 3. Spacing was 10' X 10'. Soil San Emigdio Loam. One percent slope

  9. IR-4 Ornamental Horticulture Program Trial Report

    E-Print Network [OSTI]

    Lieth, J. Heinrich

    . Results During the first 8 weeks of the trial, while the plants were outdoors under cool conditions of plants for the first 8 weeks was not significantly different for any of the treatments due to cool management) and Priyasheila Singh (plant culture, data collection). The materials being tested were supplied

  10. Standard cosmology delayed

    SciTech Connect (OSTI)

    Choudhury, Debajyoti [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Ghoshal, Debashis [School of Physical Sciences, Jawaharlal Nehru University, New Delhi 110067 (India); Sen, Anjan Ananda, E-mail: debajyoti.choudhury@gmail.com, E-mail: dghoshal@mail.jnu.ac.in, E-mail: anjan.ctp@jmi.ac.in [Centre for Theoretical Physics, Jamia Millia Islamia, New Delhi 110025 (India)

    2012-02-01T23:59:59.000Z

    The introduction of a delay in the Friedmann equation of cosmological evolution is shown to result in the very early universe undergoing the necessary accelerated expansion in the usual radiation (or matter) dominated phase. Occurring even without a violation of the strong energy condition, this expansion slows down naturally to go over to the decelerated phase, namely the standard Hubble expansion. This may obviate the need for a scalar field driven inflationary epoch.

  11. Standard Cosmology Delayed

    E-Print Network [OSTI]

    Debajyoti Choudhury; Debashis Ghoshal; Anjan Ananda Sen

    2012-02-06T23:59:59.000Z

    The introduction of a delay in the Friedmann equation of cosmological evolution is shown to result in the very early universe undergoing the necessary accelerated expansion in the usual radiation (or matter) dominated phase. Occurring even without a violation of the strong energy condition, this expansion slows down naturally to go over to the decelerated phase, namely the standard Hubble expansion. This may obviate the need for a scalar field driven inflationary epoch.

  12. Standard Cosmology Delayed

    E-Print Network [OSTI]

    Choudhury, Debajyoti; Sen, Anjan Ananda

    2011-01-01T23:59:59.000Z

    The introduction of a delay in the Friedmann equation of cosmological evolution is shown to result in the very early universe undergoing the necessary accelerated expansion in the usual radiation (or matter) dominated phase. Occurring even without a violation of the strong energy condition, this expansion slows down naturally to go over to the decelerated phase, namely the standard Hubble expansion. This may obviate the need for a scalar field driven inflationary epoch.

  13. Standard costs for labor

    E-Print Network [OSTI]

    Khan, Mohammed Nurul Absar

    1960-01-01T23:59:59.000Z

    STANDARD COSTS FOR LABOR A Thesis By MD. NURUL ABSAR KHAN Submitted to the Graduate School of the Agricultural and Mechanical College of Texms in partial fulfillment of the requirements for the degree of MASTER OF BUSINESS ADMINISTRATION... January 1960 Ma/or Sub)acts Accounting STANOAHD COSTS FOR LABOR ND, NURUL ABSAR KHAN Approved as t style and content bys Chairman of Committee Head of Hepartment January 1960 The author acknowledges his indebtedness to Mr. T. M. Leland, Mr. T. D...

  14. ORISE: Standards development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACKRadiological programStandards development For 30 years,

  15. Standard interface file handbook

    SciTech Connect (OSTI)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01T23:59:59.000Z

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  16. Pipeline Decommissioning Trial AWE Berkshire UK - 13619

    SciTech Connect (OSTI)

    Agnew, Kieran [AWE, Aldermaston, Reading, RG7 4PR (United Kingdom)] [AWE, Aldermaston, Reading, RG7 4PR (United Kingdom)

    2013-07-01T23:59:59.000Z

    This Paper details the implementation of a 'Decommissioning Trial' to assess the feasibility of decommissioning the redundant pipeline operated by AWE located in Berkshire UK. The paper also presents the tool box of decommissioning techniques that were developed during the decommissioning trial. Constructed in the 1950's and operated until 2005, AWE used a pipeline for the authorised discharge of treated effluent. Now redundant, the pipeline is under a care and surveillance regime awaiting decommissioning. The pipeline is some 18.5 km in length and extends from AWE site to the River Thames. Along its route the pipeline passes along and under several major roads, railway lines and rivers as well as travelling through woodland, agricultural land and residential areas. Currently under care and surveillance AWE is considering a number of options for decommissioning the pipeline. One option is to remove the pipeline. In order to assist option evaluation and assess the feasibility of removing the pipeline a decommissioning trial was undertaken and sections of the pipeline were removed within the AWE site. The objectives of the decommissioning trial were to: - Demonstrate to stakeholders that the pipeline can be removed safely, securely and cleanly - Develop a 'tool box' of methods that could be deployed to remove the pipeline - Replicate the conditions and environments encountered along the route of the pipeline The onsite trial was also designed to replicate the physical prevailing conditions and constraints encountered along the remainder of its route i.e. working along a narrow corridor, working in close proximity to roads, working in proximity to above ground and underground services (e.g. Gas, Water, Electricity). By undertaking the decommissioning trial AWE have successfully demonstrated the pipeline can be decommissioned in a safe, secure and clean manor and have developed a tool box of decommissioning techniques. The tool box of includes; - Hot tapping - a method of breaching the pipe while maintaining containment to remove residual liquids, - Crimp and shear - remote crimping, cutting and handling of pipe using the excavator - Pipe jacking - a way of removing pipes avoiding excavations and causing minimal disturbance and disruption. The details of the decommissioning trial design, the techniques employed, their application and effectiveness are discussed and evaluated here in. (authors)

  17. Standards for language encoding: ISO

    E-Print Network [OSTI]

    Erjavec, TomaÂ?

    Standards for language encoding: ISO Tomaz Erjavec Dept. of Knowledge Technologies Jozef Stefan of International Standards, founded in 1947. A network of the national standards institutes of 162 countries. Somewhat problematic business model: standards are published on paper and have to be bought however, many

  18. Standard Syllabi and Grading Policy

    E-Print Network [OSTI]

    von der Heydt, RĂĽdiger

    Standard Syllabi and Grading Policy Professor and Executive Vice Dean Phil Phan The Johns Hopkins Is a Syllabus #12;· All the current Carey standard syllabi are listed online http://carey.jhu.edu/standard_syllabi · Carey standard syllabus templates are available online http

  19. Texas Surface Water Quality Standards

    E-Print Network [OSTI]

    1 Texas Surface Water Quality Standards 30 TAC Chapter 307 Lori Hamilton Water Quality Standards of the water quality standards for a water body will be conducted Types of UAAs Aquatic Life Use (ALU) UAAs 2 procedures in conjunction with Standards revision Before Conducting a UAA Coordinate with your TCEQ project

  20. 2008 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    2008 BUILDING ENERGY EFFICIENCY STANDARDS C A L I F O R N I A E N E RGY CO M M I S S I O N Buildings and Appliances Office #12;Acknowledgments The Building Energy Efficiency Standards (Standards the adoption of the 2008 Building Energy Efficiency Standards to Jon Leber, PE, (November 13, 1947 - February

  1. TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE

    E-Print Network [OSTI]

    Boyer, Edmond

    ) developed by the International Standards Organization TC32 SC4, which is to serve as a basis for harmonizingChapter # TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE RESOURCES Nancy Ide and Laurent Romary-284" #12;2 Chapter # Language Engineering Standards (EAGLES) and the International Standard for Language

  2. An Open System Transportation Security Sensor Network: Field Trial Experiences

    E-Print Network [OSTI]

    Kansas, University of

    . . . . . . . . . . . . . . . . . . . . . . . 7 III Experiments 8 III-A Road Test with Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 III-B Short-haul Rail Trial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 V-B Short-haul Trial: Message Counts . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 V

  3. arthritis clinical trials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    499 Clinical Trial Closeout Checklist and Certification (Due 90 days after end of project) Physics Websites Summary: . Principal...

  4. acupuncture clinical trials: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    439 Clinical Trial Closeout Checklist and Certification (Due 90 days after end of project) Physics Websites Summary: . Principal...

  5. arthritis clinical trial: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    499 Clinical Trial Closeout Checklist and Certification (Due 90 days after end of project) Physics Websites Summary: . Principal...

  6. Facilities at a Glance Undergraduate Room Type Standard Shared Standard Standard Catered

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Facilities at a Glance ­ Undergraduate Room Type Standard Shared Standard Standard Catered Standard Communal area clean John Wood Building N/A 6 weekly bedroom clean Data/WIFI Flat screen monitor TV +TV Licence VOIP Telephony John Wood Building Freewire Service Recycling

  7. Fractional Standard Map

    E-Print Network [OSTI]

    Mark Edelman; Vasily E. Tarasov

    2009-11-24T23:59:59.000Z

    Properties of the phase space of the standard map with memory are investigated. This map was obtained from a kicked fractional differential equation. Depending on the value of the parameter of the map and the fractional order of the derivative in the original differential equation this nonlinear dynamical system demonstrates attractors (fixed points, stables periodic trajectories, slow converging and slow diverging trajectories, ballistic trajectories, and fractal-like structures) and/or chaotic trajectories. At least one type of fractal-like sticky attractors in the chaotic sea was observed.

  8. Sandia National Laboratories: Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -theErikGroundbreakingStandards Solar Thermochemical Hydrogen Production On June 13,

  9. Fluor Daniel Hanford contract standards/requirements identification document

    SciTech Connect (OSTI)

    Bennett, G.L.

    1997-04-24T23:59:59.000Z

    This document, the Standards/Requirements Identification Document (S/RID) for the Fluor Daniel Hanford Contract, represents the necessary and sufficient requirements to provide an adequate level of protection of the worker, public health and safety, and the environment.

  10. Global Potential of Energy Efficiency Standards and Labeling Programs

    E-Print Network [OSTI]

    McNeil, Michael A

    2008-01-01T23:59:59.000Z

    impact of room air conditioners energy labels in Malaysia."of electric Room Air Conditioner." Energy Economics 20Standard Levels for Room Air Conditioners. McNeil, M. A. ,

  11. Measurement of neutron spectra in varied environments by the foil-activation method with arbitrary trials

    SciTech Connect (OSTI)

    Kelly, J.G.; Vehar, D.W.

    1987-12-01T23:59:59.000Z

    Neutron spectra have been measured by the foil-activation method in 13 different environments in and around the Sandia Pulsed Reactor, the White Sands Missile Range Fast Burst Reactor, and the Sandia Annular Core Research Reactor. The spectra were obtained by using the SANDII code in a manner that was not dependent on the initial trial. This altered technique is better suited for the determination of spectra in environments that are difficult to predict by calculation, and it tends to reveal features that may be biased out by the use of standard trial-dependent methods. For some of the configurations, studies have also been made of how well the solution is determined in each energy region. The experimental methods and the techniques used in the analyses are thoroughly explained. 34 refs., 51 figs., 40 tabs.

  12. UCIT Data Network Standards Campus Wireless Network Standard

    E-Print Network [OSTI]

    Habib, Ayman

    on the University of Calgary campuses, both inside buildings and outdoor areas. This standard does not apply Standard in buildings as the infrastructure is upgraded. All new AP deployments will be connected to 1 Gbps POE switches which will then be connected to the building head end switches. 4.3. Wireless Standard Wi

  13. Pepper Variety Trial, Results Summary Summer 2010

    E-Print Network [OSTI]

    New Hampshire, University of

    County Complex in North Haverhill, NH. The purpose of the trial was to test these shorter season Lady Bell 57.04 15.43% 0.40 2.01% Green to Red, but few colored King Arthur 45.65 8.51% 0.41 1, but none colored Carmen 60.98 11.69% 0.23 7.62% Green to Red, tapered, colored early Golden California

  14. Energy efficiency standards for residential and commercial equipment: Additional opportunities

    SciTech Connect (OSTI)

    Rosenquist, Greg; McNeil, Michael; Iyer, Maithili; Meyers, Steve; McMahon, Jim

    2004-08-02T23:59:59.000Z

    Energy efficiency standards set minimum levels of energy efficiency that must be met by new products. Depending on the dynamics of the market and the level of the standard, the effect on the market for a given product may be small, moderate, or large. Energy efficiency standards address a number of market failures that exist in the buildings sector. Decisions about efficiency levels often are made by people who will not be responsible for the energy bill, such as landlords or developers of commercial buildings. Many buildings are occupied for their entire lives by very temporary owners or renters, each unwilling to make long-term investments that would mostly reward subsequent users. And sometimes what looks like apathy about efficiency merely reflects inadequate information or time invested to evaluate it. In addition to these sector-specific market failures, energy efficiency standards address the endemic failure of energy prices to incorporate externalities. In the U.S., energy efficiency standards for consumer products were first implemented in California in 1977. National standards became effective starting in 1988. By the end of 2001, national standards were in effect for over a dozen residential appliances, as well as for a number of commercial sector products. Updated standards will take effect in the next few years for several products. Outside the U.S., over 30 countries have adopted minimum energy performance standards. Technologies and markets are dynamic, and additional opportunities to improve energy efficiency exist. There are two main avenues for extending energy efficiency standards. One is upgrading standards that already exist for specific products. The other is adopting standards for products that are not covered by existing standards. In the absence of new and upgraded energy efficiency standards, it is likely that many new products will enter the stock with lower levels of energy efficiency than would otherwise be the case. Once in the stock, it is either impossible or more costly to improve the energy efficiency. Therefore, by not expanding or upgrading energy efficiency standards, opportunities for saving energy would be lost. In the past two decades, standards have significantly raised the level of energy efficiency for new products. How much more might be gained by making standards more stringent on products already subject to them, or by extending standards to products not yet covered? The main goal of this study is to estimate key national impacts of new and upgraded energy efficiency standards for residential and commercial equipment. These impacts approximate the opportunity for national benefits that may be lost if standards are not upgraded and expanded from current levels. This study also identifies the end uses where the largest opportunities exist. This analysis was prepared for the National Commission on Energy Policy (NCEP). It uses an analytical approach that is similar in concept to that used by the U.S. Department of Energy (DOE) to set standard levels. It relies on much less data and uses more simplified assumptions than the detailed and complex formulations used in DOE's standard-setting process. The results of this analysis should thus be viewed as a first approximation of the impacts that would actually be achieved by new standards. All monetary values in this report are in 2002 dollars.

  15. DOE Technical Standards List. Directory of DOE and contractor personnel involved in non-government standards activities

    SciTech Connect (OSTI)

    NONE

    1997-06-01T23:59:59.000Z

    This is a periodic report on the level of agency participation in non-Government standards activities. This technical standards list is intended to assist US Department of Energy (DOE) management and other personnel involved in the DOE technical Standards Program by identifying those participating individuals. The body of this document contains a listing of DOE employees and DOE contractors who have submitted a Record of Non-Government Standards Activity. Additional names were added from rosters supplied by non-Government standards bodies. Appendices to this document are provided to list the information by parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees.

  16. Microfabricated ion frequency standard

    DOE Patents [OSTI]

    Schwindt, Peter (Albuquerque, NM); Biedermann, Grant (Albuquerque, NM); Blain, Matthew G. (Albuquerque, NM); Stick, Daniel L. (Albuquerque, NM); Serkland, Darwin K. (Albuquerque, NM); Olsson, III, Roy H. (Albuquerque, NM)

    2010-12-28T23:59:59.000Z

    A microfabricated ion frequency standard (i.e. an ion clock) is disclosed with a permanently-sealed vacuum package containing a source of ytterbium (Yb) ions and an octupole ion trap. The source of Yb ions is a micro-hotplate which generates Yb atoms which are then ionized by a ultraviolet light-emitting diode or a field-emission electron source. The octupole ion trap, which confines the Yb ions, is formed from suspended electrodes on a number of stacked-up substrates. A microwave source excites a ground-state transition frequency of the Yb ions, with a frequency-doubled vertical-external-cavity laser (VECSEL) then exciting the Yb ions up to an excited state to produce fluorescent light which is used to tune the microwave source to the ground-state transition frequency, with the microwave source providing a precise frequency output for the ion clock.

  17. Environmental Public Health Performance Standards

    E-Print Network [OSTI]

    Environmental Public Health Performance Standards Environmental Health Program Self Agency: Total Environmental Health Program Budget: #12;Environmental Public Health Performance Standards (v. 2.0); Environmental Health Program Assessment Instrument, 1/7/2010 Page 2 Proportion

  18. Beyond Standard Model calculations with Sherpa

    E-Print Network [OSTI]

    Stefan Höche; Silvan Kuttimalai; Steffen Schumann; Frank Siegert

    2014-12-19T23:59:59.000Z

    We present a fully automated framework as part of the Sherpa event generator for the computation of tree-level cross sections in beyond Standard Model scenarios, making use of model information given in the Universal FeynRules Output format. Elementary vertices are implemented into C++ code automatically and provided to the matrix-element generator Comix at runtime. Widths and branching ratios for unstable particles are computed from the same building blocks. The corresponding decays are simulated with spin correlations. Parton showers, QED radiation and hadronization are added by Sherpa, providing a full simulation of arbitrary BSM processes at the hadron level.

  19. Non-standard Neutrino Interactions

    E-Print Network [OSTI]

    D. Hernandez

    2009-11-25T23:59:59.000Z

    Theories beyond the Standard Model must respect its gauge symmetry. This implies strict constraints on the possible models of Non-Standard Neutrino Interactions (NSIs). We review here the present status of NSIs from the point of view of effective field theory. Our recent work on the restrictions implied by Standard Model gauge invariance is provided along with some examples of possible gauge invariant models featuring non-standard interactions.

  20. TECHNICAL STANDARDS PROGRAM TOPICAL COMMITTEES

    Broader source: Energy.gov [DOE]

    PurposeThis procedure describes how topical committees are organized and recognized under the Technical Standards Program. 

  1. STANDARD LAN -1 Fiber Channel

    E-Print Network [OSTI]

    Mellia, Marco

    STANDARD LAN - 1 Fiber Channel Gruppo Reti TLC nome.cognome@polito.it http://www.telematica.polito.it/ #12;STANDARD LAN - 2 Fibre Channel · Born to interconnect mainframes and servers to storage systems: fibERs, but not only... · Interoperability with SCSI, Internet Protocol (IP), ... · Standard ANSI X3

  2. Energy Codes and Standards: Facilities

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Shankle, Diana L.

    2007-01-01T23:59:59.000Z

    Energy codes and standards play a vital role in the marketplace by setting minimum requirements for energy-efficient design and construction. They outline uniform requirements for new buildings as well as additions and renovations. This article covers basic knowledge of codes and standards; development processes of each; adoption, implementation, and enforcement of energy codes and standards; and voluntary energy efficiency programs.

  3. Environmental Public Health Performance Standards

    E-Print Network [OSTI]

    Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 National Center for Environmental Health Division of Emergency and Environmental Health Services #12;#12;Environmental Public Health Performance Standards (Version 2.0) Updated May 2014 #12;Environmental Public Health Performance Standards

  4. Appendix A: STANDARD OPERATING PROCEDURES

    E-Print Network [OSTI]

    Ferrara, Katherine W.

    1 Appendix A: STANDARD OPERATING PROCEDURES A. STANDARD OPERATING PROCEDURES Standard Operating Procedures (SOP) are written safety and health guidelines for laboratory work with hazardous chemicals Procedures be written for hazardous chemicals when the chemical is used routinely in the laboratory and when

  5. TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE

    E-Print Network [OSTI]

    Ide, Nancy

    ) developed by the International Standards Organization TC32 SC4, which is to serve as a basis for harmonizing. It is in this context that a committee of the International Standards Organization (ISO), TC 37/SC 4Chapter # TOWARDS INTERNATIONAL STANDARDS FOR LANGUAGE RESOURCES Nancy Ide and Laurent Romary

  6. The Question The Standard Construction

    E-Print Network [OSTI]

    Raghavan, Dilip

    The Question The Standard Construction The ZFC construction Bibliography Solution to a Problem Construction The ZFC construction Bibliography Outline 1 The Question 2 The Standard Construction 3 The ZFC construction Dilip Raghavan Solution to a Problem of Van Douwen #12;The Question The Standard Construction

  7. Predictive building automation Research results from a field trial Special event in Allschwil, Thursday, September 20, 2012

    E-Print Network [OSTI]

    Fischlin, Andreas

    Predictive building automation ­ Research results from a field trial Special event in Allschwil-efficient control while maintaining a high level of comfort for the building users. Predictive building automation of computer simulations. The project partners focused on the so-called integrated room automation, which deals

  8. ARM Standards Policy Committee Report

    SciTech Connect (OSTI)

    Cialella, A; Jensen, M; Koontz, A; McFarlane, S; McCoy, R; Monroe, J; Palanisamy, G; Perez, R; Sivaraman, C

    2012-09-19T23:59:59.000Z

    Data and metadata standards promote the consistent recording of information and are necessary to ensure the stability and high quality of Atmospheric Radiation Measurement (ARM) Climate Research Facility data products for scientific users. Standards also enable automated routines to be developed to examine data, which leads to more efficient operations and assessment of data quality. Although ARM Infrastructure agrees on the utility of data and metadata standards, there is significant confusion over the existing standards and the process for allowing the release of new data products with exceptions to the standards. The ARM Standards Policy Committee was initiated in March 2012 to develop a set of policies and best practices for ARM data and metadata standards.

  9. Standards Panel: 1. Stephen Diamond, General Manager, Industry Standards Office and Global Standards Officer, EMC

    E-Print Network [OSTI]

    Standards Officer, EMC Corporation, Office of the CTO Steve Diamond has 30 years of management, marketing was President of the IEEE Computer Society. Steve is General Manager of the Industry Standards Office at EMC Corporation, and Global Standards Officer in the Office of the CTO. Before EMC, he was responsible for cloud

  10. Trial Demonstration of Area Lighting Retrofit

    Broader source: Energy.gov [DOE]

    LED Area Lighting Retrofit: Yuma Border Patrol Along the Yuma Sector Border Patrol Area in Yuma, Arizona, the GATEWAY program conducted a trial demonstration in which the incumbent quartz metal halide area lighting was replaced with LED at three pole locations. The LED system was found to equal or better the incumbent system in terms of both illuminance and uniformity, and an advanced optical system and lower pole height improved the illuminance uniformity, reduced stray light, and increased projected energy and maintenance cost savings. This high luminous flux and high temperature application is not unique and similar applications can benefit from the findings of this installation.

  11. Seminar -4. letnik Landau Levels in Graphene

    E-Print Network [OSTI]

    Ramsak, Anton

    Seminar - 4. letnik Landau Levels in Graphene Author: Zala Lenarcic Mentor: prof. Anton Ramsak Ljubljana, December 2010 Abstract In this seminar I present graphene, a new material with promising to graphene's unusual energy dispersion. I will derive Landau levels for standard electrons, for electrons

  12. Environmental standards provide competitive advantage

    SciTech Connect (OSTI)

    Chynoweth, E.; Kirshner, E.

    1993-04-28T23:59:59.000Z

    Quality organizations are breaking new ground with the development of international standards for environmental management. These promise to provide the platform for chemical companies wanting to establish their environmental credibility with a global audience. [open quotes]It will be similar to auditing our customers to ISO 9000[close quote], says the environmental manager for a European chemical firm. [open quote]We will only want to deal with people who have got their environmental act together. And we'll be in a better competitive positions[close quote]. The International Organization for Standardization (ISO;Geneva) has set up a taskforce to develop an environmental management standard, which is expected to be completed by the mid-1990s. Observers think the ISO standard will draw heavily on the British Standard Institute's (BSI;London) environmental management standard, BS7750, which will likely be the first system adopted in the world. Published last year, BS7750 has been extensively piloted in the UK (CW, Sept. 30, 1992, p. 62) and is now set to be revised before being offically adopted by BSI. The UK's Chemical Industries Association (CIA;London) is anxious to prevent a proliferation of standards, and its report on BS7750 pilot projects calls for an approach integrating quality, environment, and health and safety. But standard setters, including ISO, appear to be moving in the opposite direction. In the US, the American national Standards Institute (ANSI;Washington) has started work on an environmental management standard.

  13. Trigonimetric Trial Wave Function for the Hydrogen Atom Trial wave function: r ,( ) 3

    E-Print Network [OSTI]

    Rioux, Frank

    r( ):= Integral: 0 r4 r 2 d Kinetic energy operator: T 1 2 r - 2 r r( ) d d 2 = Potential energy operatory: V 1 r -= a. Demonstrate the wave function is normalized. 0 r r ,( )2 4 r 2 d ,( ) 2 r 2 S r( ) 2 r #12;f. Calculate the kinetic and potential energy contributions for the trial

  14. Results from On-farm N Rate Response Trials

    E-Print Network [OSTI]

    Balser, Teri C.

    /corn · South Central Wis. ­ Kevin Shelley, NPM program ­ Silt loam soils ­ 11 trials, 1999-2002, Soybean

  15. Fungicide control of apple scab: 2010 field trial

    E-Print Network [OSTI]

    Eynard, James; Wunderlich, Lynn; Gubler, W D

    2010-01-01T23:59:59.000Z

    communications. 2010 Apple scab field trial, Department ofduring leaf fall to control apple scab (Venturia inaequalis)mixtures on scab control in apple orchards. Plant Pathology

  16. admission a randomized trial: Topics by E-print Network

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    eScholarship Repository Summary: oral prednisolone or naproxen for the treatment of gout arthritis: a double-blind, randomised equivalence trial.oral indomethacinparacetamol...

  17. Surface Water Quality Standards (Nebraska)

    Broader source: Energy.gov [DOE]

    These regulations, promulgated by the Department of Environmental Quality, contain surface water quality standards, stream classifications, discussion of lakes and impounded basins, and water...

  18. Interconnection Standards for Small Generators

    Broader source: Energy.gov [DOE]

    The Federal Energy Regulatory Commission (FERC) adopted "small generator" interconnection standards for distributed energy resources up to 20 megawatts (MW) in capacity in May 2005.* The FERC's...

  19. web identity standards introduction .............................................................................................................87

    E-Print Network [OSTI]

    Mullins, Dyche

    web identity standards sectionten 86 contents introduction............................................................................................................... 89-90 tagline and the web .................................................................................................91 tagline and the web: improper use

  20. Ambient Air Quality Standards (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations set statewide ambient air quality standards for various contaminants. The state code follows the regulations set forth in the National Primary and Secondary Ambient Air Quality...

  1. International Quality Assurance Standards (Presentation)

    SciTech Connect (OSTI)

    Kurtz, S.; Hacke, P.; Wohlgemuth, J.; Kempe, M.; Yamamichi, M.

    2011-02-01T23:59:59.000Z

    Tests to make quantitative predictions about photovoltaic (PV) modules are needed. This presentation proposes the creation of international quality assurance standards for PV modules.

  2. Emission Standards for Contaminants (Iowa)

    Broader source: Energy.gov [DOE]

    These regulations list emissions standards for various contaminants, and contain special requirements for anaerobic lagoons. These regulations also describe alternative emissions limits, which may...

  3. Standard and non standard ideas for the Higgs boson sector

    E-Print Network [OSTI]

    Abbondandolo, Alberto

    Standard and non standard ideas for the Higgs boson sector Riccardo Barbieri Johns Hopkins Workshop as the Higgs boson is in their low-energy spectrum We only know of approximate symmetries that can explain synoptic table Supersymmetric The SM Higgs boson TC-like Minimally extended Higgsless "Composite" 5

  4. Toward Semi-automated Assessment of Target Volume Delineation in Radiotherapy Trials: The SCOPE 1 Pretrial Test Case

    SciTech Connect (OSTI)

    Gwynne, Sarah, E-mail: Sarah.Gwynne2@wales.nhs.uk [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom)] [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom); Spezi, Emiliano; Wills, Lucy [Department of Medical Physics, Velindre Cancer Centre, Cardiff, Wales (United Kingdom)] [Department of Medical Physics, Velindre Cancer Centre, Cardiff, Wales (United Kingdom); Nixon, Lisette; Hurt, Chris [Wales Cancer Trials Unit, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom)] [Wales Cancer Trials Unit, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom); Joseph, George [Department of Diagnostic Radiology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom)] [Department of Diagnostic Radiology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom); Evans, Mererid [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom)] [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom); Griffiths, Gareth [Wales Cancer Trials Unit, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom)] [Wales Cancer Trials Unit, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom); Crosby, Tom [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom)] [Department of Clinical Oncology, Velindre Cancer Centre, Cardiff, Wales (United Kingdom); Staffurth, John [Division of Cancer, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom)] [Division of Cancer, School of Medicine, Cardiff University, Cardiff, Wales (United Kingdom)

    2012-11-15T23:59:59.000Z

    Purpose: To evaluate different conformity indices (CIs) for use in the analysis of outlining consistency within the pretrial quality assurance (Radiotherapy Trials Quality Assurance [RTTQA]) program of a multicenter chemoradiation trial of esophageal cancer and to make recommendations for their use in future trials. Methods and Materials: The National Cancer Research Institute SCOPE 1 trial is an ongoing Cancer Research UK-funded phase II/III randomized controlled trial of chemoradiation with capecitabine and cisplatin with or without cetuximab for esophageal cancer. The pretrial RTTQA program included a detailed radiotherapy protocol, an educational package, and a single mid-esophageal tumor test case that were sent to each investigator to outline. Investigator gross tumor volumes (GTVs) were received from 50 investigators in 34 UK centers, and CERR (Computational Environment for Radiotherapy Research) was used to perform an assessment of each investigator GTV against a predefined gold-standard GTV using different CIs. A new metric, the local conformity index (l-CI), that can localize areas of maximal discordance was developed. Results: The median Jaccard conformity index (JCI) was 0.69 (interquartile range, 0.62-0.70), with 14 of 50 investigators (28%) achieving a JCI of 0.7 or greater. The median geographical miss index was 0.09 (interquartile range, 0.06-0.16), and the mean discordance index was 0.27 (95% confidence interval, 0.25-0.30). The l-CI was highest in the middle section of the volume, where the tumor was bulky and more easily definable, and identified 4 slices where fewer than 20% of investigators achieved an l-CI of 0.7 or greater. Conclusions: The available CIs analyze different aspects of a gold standard-observer variation, with JCI being the most useful as a single metric. Additional information is provided by the l-CI and can focus the efforts of the RTTQA team in these areas, possibly leading to semi-automated outlining assessment.

  5. Beyond the Cosmological Standard Model

    E-Print Network [OSTI]

    Austin Joyce; Bhuvnesh Jain; Justin Khoury; Mark Trodden

    2014-12-15T23:59:59.000Z

    After a decade and a half of research motivated by the accelerating universe, theory and experiment have a reached a certain level of maturity. The development of theoretical models beyond \\Lambda, or smooth dark energy, often called modified gravity, has led to broader insights into a path forward, and a host of observational and experimental tests have been developed. In this review we present the current state of the field and describe a framework for anticipating developments in the next decade. We identify the guiding principles for rigorous and consistent modifications of the standard model, and discuss the prospects for empirical tests. We begin by reviewing attempts to consistently modify Einstein gravity in the infrared, focusing on the notion that additional degrees of freedom introduced by the modification must screen themselves from local tests of gravity. We categorize screening mechanisms into three broad classes: mechanisms which become active in regions of high Newtonian potential, those in which first derivatives become important, and those for which second derivatives are important. Examples of the first class, such as f(R) gravity, employ the familiar chameleon or symmetron mechanisms, whereas examples of the last class are galileon and massive gravity theories, employing the Vainshtein mechanism. In each case, we describe the theories as effective theories. We describe experimental tests, summarizing laboratory and solar system tests and describing in some detail astrophysical and cosmological tests. We discuss future tests which will be sensitive to different signatures of new physics in the gravitational sector. Parts that are more relevant to theorists vs. observers/experimentalists are clearly indicated, in the hope that this will serve as a useful reference for both audiences, as well as helping those interested in bridging the gap between them.

  6. Technical Standards, Program Project Justification Statement...

    Office of Environmental Management (EM)

    More Documents & Publications DOE-TSPP-2-2013, Initiating DOE Technical Standards DOE-TSPP-7-2013, Maintaining DOE Technical Standards Technical Standards Newsletter - March 2014...

  7. Standards for Power Electronic Components

    E-Print Network [OSTI]

    Standards for Power Electronic Components and Systems EPE 14 ECCE Europe Dr Peter R. Wilson #12;Session Outline · "Standards for Power Electronic Components and Systems" ­ Peter Wilson, IEEE PELS Electronics ­ where next? · Wide Band Gap Devices ­ SiC, GaN etc... · Transformers (ETTT) · Power Modules

  8. 10 November 1998 Standard Applications

    E-Print Network [OSTI]

    10 November 1998 Standard Applications Framework for EPICS (SAFE) Steve Lewis (LBNL) Revision 2.0--for EPICS R3.13Beta12-LBL.2 or R3.13.0-LBL.2 1.0 Introduction The Standard Applications Framework for EPICS (SAFE) provides an organized approach for building EPICS applications on a Unix host, include

  9. STANDARD OPERATING PROCEDURES Site Selection

    E-Print Network [OSTI]

    Fischer, Emily V.

    IMPROVE STANDARD OPERATING PROCEDURES SOP 126 Site Selection Date Last Modified Modified by: 09 References none #12;SOP 126: Site Selection 3 1.0 PURPOSE AND APPLICABILITY This standard operating procedure field conditions, and for ease of operation and maintenance. IMPROVE aerosol samplers are generally

  10. ENERGY EFFICIENCY STANDARDS FOR RESIDENTIALAND

    E-Print Network [OSTI]

    ENERGY EFFICIENCY STANDARDS FOR RESIDENTIALAND NONRESIDENTIAL BUILDINGS 1 JULY 1995 CALIFORNIA ENERGY =I COMMISSION Pete Wilson, Governor ~400-95-001 For historical reference Current Title 24 Standards are available at: http://www.energy.ca.gov/title24/ #12;CALIFORNIA ENERGY COMMISSION Valerie Hall

  11. International Standards in Forensic DNA

    E-Print Network [OSTI]

    International Standards in Forensic DNA John M. Butler, Ph.D. National Institute of Standards and Technology NIST Fellow & Special Assistant to the Director for Forensic Science Vice-Chair, National Commission on Forensic Science World Forensics Festival Seoul, Korea October 15, 2014 #12;Definition

  12. Figure 2 Analysis Tool Interface Level-1 / PBBT Analysis Tool

    E-Print Network [OSTI]

    Figure 2 ­ Analysis Tool Interface Level-1 / PBBT Analysis Tool Introduction The Level-1/PBBT Analysis Tool (LPAT) was designed to assist in the analysis of North American Standard Level-1 Inspection. The data incorporated into the tool includes the results of Level-1 inspections with accompanying PBBT test

  13. Design, rationale, and baseline characteristics of a cluster randomized controlled trial of pay for performance for hypertension treatment: Study Protocol

    E-Print Network [OSTI]

    2011-01-01T23:59:59.000Z

    Treatment to Prevent Heart Attack Trial; HCS = healthcareTreatment to Prevent Heart Attack Trial (ALLHAT). JAMA 5.Treatment to Prevent Heart Attack Trial (ALLHAT) [4],

  14. Environmental assessment for proposed energy conservation standards for refrigerators, refrigerator-freezers, and freezers

    SciTech Connect (OSTI)

    NONE

    1996-01-01T23:59:59.000Z

    This Environmental Assessment (EA) on the candidate energy conservation standards for refrigerators, refrigerator-freezers, and freezers was prepared pursuant to the National Environmental Policy Act of 1969 (NEPA), regulations of the Council on Environmental Quality, Title 40, Code of Federal Regulations, Parts 1500 through 1508. The proposed energy conservation standard (Level 1) and the alternative standards are being reviewed in an energy-efficiency standards rulemaking that the Department has undertaken pursuant to the Energy Policy and Conservation Act, as amended by the National Energy Conservation Policy Act and the National Appliance Energy Conservation Act. The EA presents the associated environmental impacts from four energy conservation standards for this type of household appliance. For purposes of this EA, each standard is an alternative action and is compared to what is expected to happen if no new standards for this type of product were finalized, i.e., the no action alternative. Of the four energy conservation standard levels considered, standard level 4 has the highest level of energy efficiency and the largest environmental impact. The proposed action implementing Standard Level 1 would have the least environmental impacts, through emission reductions, of the four alternatives. The description of the standards results from the appliance energy-efficiency analyses conducted for the rulemaking. The presentation of environmental impacts for each of the alternatives appears at Section 3 of the EA.

  15. INFORMATION STANDARDIZATION FROM A DESIGN PERSPECTIVE

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    475 INFORMATION STANDARDIZATION FROM A DESIGN PERSPECTIVE ALEXANDER KOUTAMANIS Delft University is that it should be supported by extensive standardization of design and building information. This standardization, continuity, flexibility and adaptability. From a design perspective standardization refers to three distinct

  16. Non-standard loop quantum cosmology

    E-Print Network [OSTI]

    Wlodzimierz Piechocki

    2010-01-19T23:59:59.000Z

    We present results concerning the nature of the cosmological big bounce(BB) transition within the loop geometry underlying loop quantum cosmology (LQC). Our canonical quantization method is an alternative to the standard LQC. An evolution parameter we use has clear interpretation both at classical and quantum levels. The physical volume operator has discrete spectrum which is bounded from below. The minimum gap in the spectrum defines a quantum of the volume. The spectra of operators are parametrized by a free parameter to be determined.

  17. Application for Locally Adopted Energy Standards by the City of Cupertino

    E-Print Network [OSTI]

    energy conservation measures; and/or, set more stringent energy budgets. Because these energy standards Standards 3 The required level energy performance that exceeds the Title 24, Part 6 minimum is the resultApplication for Locally Adopted Energy Standards by the City of Cupertino In Accordance

  18. Westinghouse Hanford Company (WHC) standards/requirements identification document (S/RID)

    SciTech Connect (OSTI)

    Bennett, G.L.

    1996-03-15T23:59:59.000Z

    This Standards/Requirements Identification Document (S/RID) set forth the Environmental Safety and Health (ES&H) standards/requirements for Westinghouse Hanford Company Level Programs, where implementation and compliance is the responsibility of these organizations. These standards/requirements are adequate to ensure the protection of the health and safety of workers, the public, and the environment.

  19. Drinking Water Standards Drinking water from a local public supply must

    E-Print Network [OSTI]

    Dyer, Bill

    Drinking Water Standards Drinking water from a local public supply must meet federal and state standards for safe drink- ing water. Two sets of standards-primary drinking water and secondary drinking water- establish Maximum Contaminant Levels (MCLs) for a variety of contaminants. If the water sup- ply

  20. Pretreatment levels of bone turnover and the antifracture efficacy of alendronate: The fracture intervention trial

    E-Print Network [OSTI]

    2006-01-01T23:59:59.000Z

    in postmenopausal osteoporosis. Cal- cif Tissue Int 65:359–in postmeno- pausal osteoporosis. J Bone Miner Res 12:624–among women without osteoporosis at baseline. Although they

  1. HEAT Loan Minimum Standards and Requirements

    Broader source: Energy.gov [DOE]

    Presents additional resources on loan standards and requirements from Elise Avers' presentation on HEAT Loan Minimum Standards and Requirements.

  2. 2011 DRY BEAN YIELD TRIALS EXPERIMENT TITLE PLANTING DATE LOCATION ENTRIES DESIGN REPS HARVEST METHOD

    E-Print Network [OSTI]

    TRIAL 06/14/11 ENTRICAN MONTCALM 112 ALPHA LATTICE 3 KNIFE PULLED 1222 PRELIM. BUSH CRANBERRY YLD TRIAL-1 06/14/11 ENTRICAN MONTCALM 128 ALPHA LATTICE 3 KNIFE PULLED 1223 PRELIM. BUSH CRANBERRY YLD TRIAL

  3. National Green Building Standard Analysis

    SciTech Connect (OSTI)

    NAHB Research Center, Upper Marlboro, Maryland

    2012-07-01T23:59:59.000Z

    DOE's Building America Program is a research and development program to improve the energy performance of new and existing homes. The ultimate goal of the Building America Program is to achieve examples of cost-effective, energy efficient solutions for all U.S. climate zones. Periodic maintenance of an ANSI standard by review of the entire document and action to revise or reaffirm it on a schedule not to exceed five years is required by ANSI. In compliance, a consensus group has once again been formed and the National Green Building Standard is currently being reviewed to comply with the periodic maintenance requirement of an ANSI standard.

  4. Standards for graph algorithm primitives

    E-Print Network [OSTI]

    Mattson, Tim

    It is our view that the state of the art in constructing a large collection of graph algorithms in terms of linear algebraic operations is mature enough to support the emergence of a standard set of primitive building ...

  5. Dam Safety Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    These rules set forth procedures for application to construct, repair or modify a dam and set standards for design and maintenance of dams. These rules also establish a dam inspection procedure....

  6. Phenomenology Beyond the Standard Model

    E-Print Network [OSTI]

    Joseph D. Lykken

    2005-03-16T23:59:59.000Z

    An elementary review of models and phenomenology for physics beyond the Standard Model (excluding supersymmetry). The emphasis is on LHC physics. Based upon a talk given at the Physics at LHC conference, Vienna, 13-17 July 2004.

  7. Commercial Building Codes and Standards

    Broader source: Energy.gov [DOE]

    Once an energy-efficient technology or practice is widely available in the market, it can become the baseline of performance through building energy codes and equipment standards. The Building...

  8. Orange County- Wind Permitting Standards

    Broader source: Energy.gov [DOE]

    In December 2010, the County of Orange Board of Supervisors adopted small wind performance and development standards (Ord. No. 10-020) in order to promote distributed generation systems in non...

  9. Minimum Gas Service Standards (Ohio)

    Broader source: Energy.gov [DOE]

    Natural gas companies in Ohio are required to follow the Minimum Gas Service Standards, which are set and enforced by the Public Utilities Commission of Ohio. These rules are found in chapter 4901...

  10. Minimum Stream Flow Standards (Connecticut)

    Broader source: Energy.gov [DOE]

    These regulations apply to all dams and structures which impound or divert waters on rivers or their tributaries, with some exceptions. The regulations set standards for minimum flow (listed in the...

  11. Energy standards and model codes development, adoption, implementation, and enforcement

    SciTech Connect (OSTI)

    Conover, D.R.

    1994-08-01T23:59:59.000Z

    This report provides an overview of the energy standards and model codes process for the voluntary sector within the United States. The report was prepared by Pacific Northwest Laboratory (PNL) for the Building Energy Standards Program and is intended to be used as a primer or reference on this process. Building standards and model codes that address energy have been developed by organizations in the voluntary sector since the early 1970s. These standards and model codes provide minimum energy-efficient design and construction requirements for new buildings and, in some instances, existing buildings. The first step in the process is developing new or revising existing standards or codes. There are two overall differences between standards and codes. Energy standards are developed by a consensus process and are revised as needed. Model codes are revised on a regular annual cycle through a public hearing process. In addition to these overall differences, the specific steps in developing/revising energy standards differ from model codes. These energy standards or model codes are then available for adoption by states and local governments. Typically, energy standards are adopted by or adopted into model codes. Model codes are in turn adopted by states through either legislation or regulation. Enforcement is essential to the implementation of energy standards and model codes. Low-rise residential construction is generally evaluated for compliance at the local level, whereas state agencies tend to be more involved with other types of buildings. Low-rise residential buildings also may be more easily evaluated for compliance because the governing requirements tend to be less complex than for commercial buildings.

  12. Photovoltaic Shading Testbed for Module-Level Power Electronics: 2014 Update

    SciTech Connect (OSTI)

    Deline, C.; Meydbray, J.; Donovan, M.

    2014-08-01T23:59:59.000Z

    The 2012 NREL report 'Photovoltaic Shading Testbed for Module-Level Power Electronics' provides a standard methodology for estimating the performance benefit of distributed power electronics under partial shading conditions. Since the release of the report, experiments have been conducted for a number of products and for different system configurations. Drawing from these experiences, updates to the test and analysis methods are recommended. Proposed changes in data processing have the benefit of reducing the sensitivity to measurement errors and weather variability, as well as bringing the updated performance score in line with measured and simulated values of the shade recovery benefit of distributed PV power electronics. Also, due to the emergence of new technologies including sub-module embedded power electronics, the shading method has been extended to include power electronics that operate at a finer granularity than the module level. An update to the method is proposed to account for these emerging technologies that respond to shading differently than module-level devices. The partial shading test remains a repeatable test procedure that attempts to simulate shading situations as would be experienced by typical residential or commercial rooftop photovoltaic (PV) systems. Performance data for multiple products tested using this method are discussed, based on equipment from Enphase, Solar Edge, Maxim Integrated and SMA. In general, the annual recovery of shading losses from the module-level electronics evaluated is 25-35%, with the major difference between different trials being related to the number of parallel strings in the test installation rather than differences between the equipment tested.

  13. Sea trials for Eurodyn gas turbine

    SciTech Connect (OSTI)

    Kunberger, K.

    1995-04-01T23:59:59.000Z

    The Eurodyn gas turbine concept is a collaboration between Ulstein Turbine, Turbomeca and Volvo Aero. It is also supported by the European Community under its high-technology Eureka program (EU 159). A full-size Eurodyn prototype has been running on a test bed in France since October 1992. A complete engine, including a power output gear-box, began parallel test bed trials in Norway in March 1993. Results to date indicate that these test engines have achieved efficiencies of 32.8%. The corresponding output is recorded as being 2.6 MW (ISO) with NO{sub x} emissions stated as being as low as 24 ppm (15% O{sub 2}) running on marine diesel fuel. The Eurodyn gas turbine is designed to provide some 9000 hours of operation between overhauls, effectively giving a typical fast ferry application something like three years of operation. The TBO for power generation applications is 20000 hours, which also means about three years of operation. Of particular significance in this gas turbine package is the incorporation of a dedicated output gearbox. For marine applications the gearbox developed by Ulstein Propeller is a compact and light two-stage epicyclic unit reducing the power turbine output speed of 13000 r/min down to 1000 r/min. 3 figs.

  14. Nuclear Data Verification and Standardization

    SciTech Connect (OSTI)

    Karam, Lisa R.; Arif, Muhammad; Thompson, Alan K.

    2011-10-01T23:59:59.000Z

    The objective of this interagency program is to provide accurate neutron interaction verification and standardization data for the U.S. Department of Energy Division of Nuclear Physics programs which include astrophysics, radioactive beam studies, and heavy-ion reactions. The measurements made in this program are also useful to other programs that indirectly use the unique properties of the neutron for diagnostic and analytical purposes. These include homeland security, personnel health and safety, nuclear waste disposal, treaty verification, national defense, and nuclear based energy production. The work includes the verification of reference standard cross sections and related neutron data employing the unique facilities and capabilities at NIST and other laboratories as required; leadership and participation in international intercomparisons and collaborations; and the preservation of standard reference deposits. An essential element of the program is critical evaluation of neutron interaction data standards including international coordinations. Data testing of critical data for important applications is included. The program is jointly supported by the Department of Energy and the National Institute of Standards and Technology.

  15. Experiences from a Transportation Security Sensor Network Field Trial

    E-Print Network [OSTI]

    Kansas, University of

    . . . . . . . . . . . . . . . . . . . . . . . 11 III Experiments 12 III-A Road Test with Trucks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 III-B Short-haul Rail Trial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Partial Map of Road Test with Event Annotations . . . . . . . . . . . . . . . . . . . . . . . 13 7 Short-haul

  16. Technology Development and Field Trials of EGS Drilling Systems

    Broader source: Energy.gov (indexed) [DOE]

    Technology Development and Field Trials of EGS Drilling Systems David W. Raymond, PI Steven D. Knudsen, Co-PI Sandia National Laboratories ARRA Funded R&D April 22-25, 2013 This...

  17. Fungicide control of apple scab: 2007 trial results

    E-Print Network [OSTI]

    Janousek, Christopher N; Lorber, Jacob D; Wunderlich, Lynn; Gubler, W D

    2010-01-01T23:59:59.000Z

    from Adaskaveg et al. (2007). Apple trial, 2007. W.D. Gublerpp. MacHardy, W.E. 1996. Apple Scab. Biology, Epidemiology,Pest Management for Apples & Pears. 2 nd ed. University of

  18. Cefas contract report DP321 Wave Glider trial, final report;

    E-Print Network [OSTI]

    with various instruments, solar panels and battery packs, and a sub-sea sled providing steering and propulsionCefas contract report DP321 Wave Glider trial, final report; September 2013 Authors: Tom Hull, Dave

  19. Status of European appliance standards

    SciTech Connect (OSTI)

    Turiel, I. (Lawrence Berkeley Lab., CA (United States)); Lebot, B. (Agence de L'Environnement et de la Maitrise de L'Energie, Valbonne (France))

    1992-05-01T23:59:59.000Z

    The European Community (EC) recently commissioned a study of the impact of potential appliance standards on electricity consumption in the twelve EC nations. This study looks at refrigerators, freezers, dishwashers, clothes washers, and clothes dryers. The impact of minimum efficiency standards on electricity use over the time period from 1995--2010 is estimated. The results of this study were presented to the EC in September of 1991. Revisions were made to the draft report and final copies sent to all interested parties. The member nations of the EC will soon consider whether they wish to implement uniform energy efficiency standards that would take effect in 1995. The results of the study described above will be presented and the political considerations will be discussed. In addition, data describing the appliance market in Europe will be presented.

  20. Standard review plan for dry cask storage systems. Final report

    SciTech Connect (OSTI)

    NONE

    1997-01-01T23:59:59.000Z

    The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

  1. Assembling Appliances Standards from a Basket of Functions

    SciTech Connect (OSTI)

    Siderious, Hans-Paul; Meier, Alan

    2014-08-11T23:59:59.000Z

    Rapid innovation in product design challenges the current methodology for setting standards and labels, especially for electronics, software and networking. Major problems include defining the product, measuring its energy consumption, and choosing the appropriate metric and level for the standard. Most governments have tried to solve these problems by defining ever more specific product subcategories, along with their corresponding test methods and metrics. An alternative approach would treat each energy-using product as something that delivers a basket of functions. Then separate standards would be constructed for the individual functions that can be defined, tested, and evaluated. Case studies of thermostats, displays and network equipment are presented to illustrate the problems with the classical approach for setting standards and indicate the merits and drawbacks of the alternative. The functional approach appears best suited to products whose primary purpose is processing information and that have multiple functions.

  2. Avatars of Participants in Anticipatory Standardization Processes

    E-Print Network [OSTI]

    Bagby, John

    Avatars of Participants in Anticipatory Standardization Processes Karthikeyan Umapathy Sharoda A. Paul Sandeep Purao John W. Bagby Prasenjit Mitra Standards Interest Group, College of IST, Pennsylvania State University ABSTRACT: In the development of anticipatory ICT standards

  3. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format-271 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange Sponsored by Information Access Division Information Technology Laboratory National Institute of Standards

  4. Version Auteur Monitoring the International Standardization Process

    E-Print Network [OSTI]

    Boyer, Edmond

    organizations are in charge of global security management. To address this issue, ISO (International Standards Organization), the main international organization for technical standardization, has launched a set of studiesVersion Auteur Monitoring the International Standardization Process Theoretical Choices

  5. AMERICAN NATIONAL STANDARD MEASUREMENT MICROPHONES --

    E-Print Network [OSTI]

    Allen, Jont

    of America 120 Wall Street, 32nd Floor New York, New York 10005-3993 ANSI S1.15-1997/Part 1 ANSIS1/15/11, 08:47:38 Reaffirmed by ANSI July 10, 2001 Reaffirmed by ANSI March 21, 2006 Reaffirmed by ANSI April 8, 2011 #12;The American National Standards Institute, Inc. (ANSI) is the na- tional coordinator

  6. Standard Two: Planning and Evaluation

    E-Print Network [OSTI]

    Snider, Barry B.

    13 Standard Two: Planning and Evaluation Overview Brandeis University's goals are to sustain committed to reflection, analysis, and evaluation, Brandeis has engaged over the past decade and a half Thier's 1992 Reestablishing Academic and Economic Equilibrium, and President Reinharz's 1996 Brandeis

  7. Enforcement Policy Statement: Regional Standards Enforcement...

    Office of Environmental Management (EM)

    which set forth amended energy conservation standards for central air conditioners and heat pumps, including regional standards in certain States. 76 FR 37408. DOE has initiated...

  8. Technical Standards Newsletter - August 2007 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Published 1 Non-Government Standards Actions 1 American National Standards Institute (ANSI) 1 American Society of Mechanical Engineers (ASME) 2 ASTM International 2 American...

  9. Standardization of Transport Properties Measurements: Internal...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standardization of Transport Properties Measurements: Internal Energy Agency (IEA-AMT) Annex on Thermoelectric Standardization of Transport Properties Measurements: Internal Energy...

  10. Ambient Air Quality Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    This article lists specific standards for ambient air quality standards for particulate matter, sulfur dioxide, carbon monoxide, ozone, lead and nitrogen dioxide.

  11. Appliance and Equipment Energy Efficiency Standards

    Broader source: Energy.gov [DOE]

    '' Note: The federal government has imposed and updated appliance efficiency standards through several legislative acts,* and now has standards in place or under development for 30 classes of...

  12. An Introduction to SAE Hydrogen Fueling Standardization

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    SAE H2 Fueling Standardization 5 SAE HYDROGEN FUELING STANDARDIZATION Jesse Schneider (BMW) SAE J2601 & J2799 Sponsor SAE INTERNATIONAL *Hydrogen Fueling Background *SAE H2...

  13. Appliance Standards and Rulemaking Federal Advisory Committee...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Issuance Appliance Standards and Rulemaking Federal Advisory Committee (ASRAC) - Central Air Conditioner Regional Standards Enforcement Working Group; Notice of Open Meetings...

  14. Standards & Testing NIST has a long history of advancing standards and

    E-Print Network [OSTI]

    Standards & Testing NIST has a long history of advancing standards and the use of technology's healthcare arena. Overview NIST supports health IT standards development and facilitates interoperability through its standards and testing research initiatives. NIST research efforts contribute

  15. Social Responsibility Standards: A Quick Glimpse Although efforts to establish measurements, standards and certifications related to

    E-Print Network [OSTI]

    Aalberts, Daniel P.

    : ISO Standard 24000--Social Responsibility: The International Organization current apply FSC standards for forest management. International Organic for Standardization is developing an international standard of voluntary guidelines for social

  16. Standard Model scales from warped extra dimensions

    E-Print Network [OSTI]

    Bernard Riley

    2008-08-31T23:59:59.000Z

    If in the Randall and Sundrum RS1 model the inverse of the compactification radius, the AdS curvature scale, and the five and four-dimensional Planck scales are equal in size, as is natural, then the warp factor at the location of the low energy brane is of value 1/pi. So that all scales derive from locations in the space, we identify the extra dimension with the infinite covering space of the S1/Z2 orbifold. The extra dimension is then essentially a series of connected line intervals, punctuated by branes. Scales on successive branes in the extra dimension descend from Planck scale in a geometric sequence of common ratio 1/pi. Evidence is provided for such a sequence within the spectrum of particle masses, and of a second geometric sequence, of common ratio 2/pi, which suggests that the AdS spacetime is six-dimensional and doubly warped. The scales of the Standard Model lie at coincident levels within the two sequences. A third sequence, of common ratio 1/e, provides a symmetrical framework for the Standard Model and points to a warped product spacetime.

  17. Reference Directions for a Sound Level Meter , M.R. Vaabenb

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    0 and 90 Reference Directions for a Sound Level Meter E. Aflaloa , M.R. Vaabenb , P. Pourtaua , D the requirements of the IEC 61672 standard on sound level meters taking into account noise incidence from level meter must be pointed at the source according to standard IEC 60651. The purpose of the paper

  18. IEEE Smart Grid Series of Standards IEEE 2030 (Interoperability) and IEEE 1547 (Interconnection) Status: Preprint

    SciTech Connect (OSTI)

    Basso, T.; DeBlasio, R.

    2012-04-01T23:59:59.000Z

    The IEEE American National Standards smart grid publications and standards development projects IEEE 2030, which addresses smart grid interoperability, and IEEE 1547TM, which addresses distributed resources interconnection with the grid, have made substantial progress since 2009. The IEEE 2030TM and 1547 standards series focus on systems-level aspects and cover many of the technical integration issues involved in a mature smart grid. The status and highlights of these two IEEE series of standards, which are sponsored by IEEE Standards Coordinating Committee 21 (SCC21), are provided in this paper.

  19. DOE limited standard: Operations assessments

    SciTech Connect (OSTI)

    NONE

    1996-05-01T23:59:59.000Z

    Purpose of this standard is to provide DOE Field Element assessors with a guide for conducting operations assessments, and provide DOE Field Element managers with the criteria of the EM Operations Assessment Program. Sections 6.1 to 6.21 provide examples of how to assess specific areas; the general techniques of operations assessments (Section 5) may be applied to other areas of health and safety (e.g. fire protection, criticality safety, quality assurance, occupational safety, etc.).

  20. Physics Beyond the Standard Model

    E-Print Network [OSTI]

    Howard Baer

    2009-08-19T23:59:59.000Z

    I present a brief overview of some exciting possibilities for physics Beyond the Standard Model. I include short discussions of neutrino physics, the strong CP problem and axions, GUTs, large and warped extra dimensions, Little Higgs models and supersymmetry. The chances appear excellent that in the next few years-- as the LHC era gets underway-- data from a bevy of experiments will point the way to a new paradigm for the laws of physics as we know them.

  1. Are Standard Solar Models Reliable?

    E-Print Network [OSTI]

    John N. Bahcall; M. H. Pinsonneault; Sarbani Basu; J. Christensen-Dalsgaard

    1996-12-20T23:59:59.000Z

    The sound speeds of solar models that include element diffusion agree with helioseismological measurements to a rms discrepancy of better than 0.2% throughout almost the entire sun. Models that do not include diffusion, or in which the interior of the sun is assumed to be significantly mixed, are effectively ruled out by helioseismology. Standard solar models predict the measured properties of the sun more accurately than is required for applications involving solar neutrinos.

  2. Physics beyond the standard model

    SciTech Connect (OSTI)

    Womersley, J.

    2000-01-24T23:59:59.000Z

    The author briefly summarizes the prospects for extending the understanding of physics beyond the standard model within the next five years. He interprets ``beyond the standard model'' to mean the physics of electroweak symmetry breaking, including the standard model Higgs boson. The nature of this TeV-scale new physics is perhaps the most crucial question facing high-energy physics, but one should recall (neutrino oscillations) that there is ample evidence for interesting physics in the flavour section too. In the next five years, before the LHC starts operations, the facilities available will be LEP2, HERA and the Fermilab Tevatron. He devotes a bit more time to the Tevatron as it is a new initiative for United Kingdom institutions. The Tevatron schedule now calls for data taking in Run II, using two upgraded detectors, to begin on March 1, 2001, with 2 fb{sup {minus}1} accumulated in the first two years. A nine-month shutdown will follow, to allow new silicon detector layers to be installed, and then running will resume with a goal of accumulating 15 fb{sup {minus}1} (or more) by 2006.

  3. Standardization in Technology-Based Markets

    E-Print Network [OSTI]

    Standardization in Technology-Based Markets Gregory Tassey Senior Economist National Institute of Standards and Technology (gtassey@nist.gov) June 1999 [Forthcoming in Research Policy] #12;Standardization in Technology-Based Markets Gregory Tassey1 Senior Economist, National Institute of Standards and Technology

  4. Standards and Procedures for Promotion and Tenure

    E-Print Network [OSTI]

    Heller, Barbara

    Appendix C Standards and Procedures for Promotion and Tenure I. Preamble This document sets forth standards and procedures for faculty promotions and appointments to tenure. These standards and procedures by university needs, plans, and resources. II. Standards The criteria outlined below are, of necessity

  5. Standard Insurance Company 1100 SW Sixth Avenue

    E-Print Network [OSTI]

    Block, Louis

    Standard Insurance Company 1100 SW Sixth Avenue Portland OR 97204 www.standard.com Electronic Evidence Of Insurability Save Time: Provide Medical History Statements Online Standard Insurance Company is complete, allowing The Standard to begin the underwriting process immediately. The Web form is secure

  6. Selected Intellectual Property Issues in Standardization

    E-Print Network [OSTI]

    Spring, Michael B.

    Selected Intellectual Property Issues in Standardization Martin B.H. Weiss Michael B. Spring of a standard: development, where the content of the standard is created; distribution, where documentation on the standard is shared with the vendor and user community; and implementation, where products and processes

  7. Environmental Health and Safety Standard Operating

    E-Print Network [OSTI]

    Davis, H. Floyd

    laser safety in the laboratory while others are required by the ANSI Z136.1 laser safety standard of Radiation MPE Maximum Permissible Exposure as listed in ANSI Z136.1 standard. The maximum allowed exposure to the eye or skin to laser radiation. ANSI Z136.1 The American National Standards Institute (ANSI) standard

  8. Technical Standards Newsletter - November 2007 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Actions ... 2 *American National Standards Institute (ANSI) ... 2 *American Society of Mechanical Engineers (ASME)...

  9. Technical Standards Newsletter - October 2007 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Actions ... 2 *American National Standards Institute (ANSI) ... 2 *American Society of Mechanical Engineers (ASME)...

  10. Technical Standards Newsletter - October 2006 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Actions ... 2 *American National Standards Institute (ANSI) ... 2 *American Society of Mechanical Engineers (ASME)...

  11. Technical Standards Newsletter - November 2006 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Actions ... 2 *American National Standards Institute (ANSI) ... 2 *American Society of Mechanical Engineers (ASME)...

  12. Technical Standards Newsletter - February 2008 | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    Actions ... 2 *American National Standards Institute (ANSI) ... 2 *American Society of Mechanical Engineers (ASME)...

  13. Facilities at a Glance Undergraduate Standard Shared

    E-Print Network [OSTI]

    Burton, Geoffrey R.

    Facilities at a Glance ­ Undergraduate Room Type Standard Shared Standard Enhanced Standard Catered Standard En-suite Enhanced En-suite Catered En-suite Studio No. of Bedspaces 46 827 792 125 463 348 92 32 Residential Area Eastwood, John Wood Court, John Wood Building Eastwood, John Wood Court, Carpenter, Osborne

  14. Forests / Climate changeStandards persp ctive

    E-Print Network [OSTI]

    Boyer, Edmond

    at implementing collective action, private actors ­ multinational companies and NGOs ­ are developing standards the privatisation of sustainable development policy. Yet private standards and public regulations are often with the proliferation of standards, it became necessary to codify the way standards were developed. These private

  15. Energy Codes and Standards - ASHRAE 90.1 2007

    E-Print Network [OSTI]

    Reihl, K.

    2012-01-01T23:59:59.000Z

    level appendix B: building envelope Climate Criteria 1 very hot 8 subartic 7 very cold 6 cold 5 cool 4 mixed 3 warm 2 hot U.S. Climate Classifications ASHRAE Standard 90.1 Compliance Paths: Envelope proposed building design 90... more. Eventually it is all about a cultural shift where folks dress for the climate/season inside and out. ASHRAE Standard 90.1 Purpose ?? Provide minimum requirements for the energy-efficient design of buildings except low-rise residential...

  16. Conformance Tool High Level Design Document: IEC 61850 Cyber Security Acceleration Project

    SciTech Connect (OSTI)

    Edgar, Thomas W.

    2013-05-01T23:59:59.000Z

    This document is the high level design document for the Pacific Northwest National Laboratory (PNNL) IEC 62351-3, 4 and 6 standards conformance test software toolkit.

  17. Completion of the INEEL's WERF Incinerator Trial Burn

    SciTech Connect (OSTI)

    C. K. Branter; D. A. Conley; D. R. Moser; S. J. Corrigan

    1999-05-01T23:59:59.000Z

    This paper describes the successes and challenges associated with Resource Conservation and Recovery Act (RCRA) permitting of the Idaho National Engineering and Environmental Laboratory's (INEEL) Waste Experimental Reduction Facility (WERF) hazardous and mixed waste incinerator. Topics to be discussed include facility modifications and problems, trial burn results and lessons learned in each of these areas. In addition, a number of challenges remain including completion and final issue of the RCRA Permit and implementation of all the permit requirements. Results from the trial burn demonstrated that the operating conditions and procedures will result in emissions that are satisfactorily protective of human health, the environment, and are in compliance with Federal and State regulations.

  18. Completion of the INEEL's WERF Incinerator Trial Burn

    SciTech Connect (OSTI)

    Branter, Curtis Keith; Conley, Dennis Allen; Corrigan, Shannon James; Moser, David Roy

    1999-05-01T23:59:59.000Z

    This paper describes the successes and challenges associated with Resource Conservation and Recovery Act (RCRA) permitting of the Idaho National Engineering and Environmental Laboratory's (INEEL) Waste Experimental Reduction Facility (WERF) hazardous and mixed waste incinerator. Topics to be discussed include facility modifications and problems, trial burn results and lessons learned in each of these areas. In addition, a number of challenges remain including completion and final issue of RCRA Permit and implementation of all the permit requirements. Results from the trial burn demonstrated that the operating conditions and procedures will result in emissions that are satisfactorily protective of human health, the environment, and are in compliance with Federal and State regulations.

  19. Standard Templates Adaptive Parallel Library

    E-Print Network [OSTI]

    Arzu, Francisco Jose

    2000-01-01T23:59:59.000Z

    ]. STAPL &s v, nuen m a simple extension of the C++ hingu. & e f1. 4f which prov&dcs a SPMD motlel of' parallelism that maps easily onto distnbuted sharcd- memory sys&ems (e. g, HP V-class, SGI Power Challenge o& networks of workstations using Tread... () uses the schcduler to dispatch the per-processor segments of the container to the processors. Figure 2 show the relations between the STAPL components. 2. 2 Related %'ork 2. 2. 1 Parallel Standard Template I. ibrary The HPC+ i consortium h...

  20. Cost Estimating, Analysis, and Standardization

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1984-11-02T23:59:59.000Z

    To establish policy and responsibilities for: (a) developing and reviewing project cost estimates; (b) preparing independent cost estimates and analysis; (c) standardizing cost estimating procedures; and (d) improving overall cost estimating and analytical techniques, cost data bases, cost and economic escalation models, and cost estimating systems. Cancels DOE O 5700.2B, dated 8-5-1983; DOE O 5700.8, dated 5-27-1981; and HQ 1130.1A, dated 12-30-1981. Canceled by DOE O 5700.2D, dated 6-12-1992

  1. Standard Solar | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revisionEnvReviewNonInvasiveExplorationUT-g GrantAtlas (PACA RegionSpringview IISt. Mary's WindName: StandardSolar

  2. Active DOE Technical Standards Projects

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:YearRound-Up fromDepartment of Energy 601DepartmentContract.4 (February 2038TECHNICAL STANDARDS

  3. A Standard for Neuroscience Data

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary)morphinanInformation Desert SouthwestTechnologies |November 2011A FirstEMSL ShellA Standard for Neuroscience

  4. Computed Tomography software and standards

    SciTech Connect (OSTI)

    Azevedo, S.G.; Martz, H.E.; Skeate, M.F.; Schneberk, D.J.; Roberson, G.P.

    1990-02-20T23:59:59.000Z

    This document establishes the software design, nomenclature, and conventions for industrial Computed Tomography (CT) used in the Nondestructive Evaluation Section at Lawrence Livermore National Laboratory. It is mainly a users guide to the technical use of the CT computer codes, but also presents a proposed standard for describing CT experiments and reconstructions. Each part of this document specifies different aspects of the CT software organization. A set of tables at the end describes the CT parameters of interest in our project. 4 refs., 6 figs., 1 tab.

  5. Liquid level detector

    DOE Patents [OSTI]

    Grasso, Albert P. (Vernon, CT)

    1986-01-01T23:59:59.000Z

    A liquid level detector for low pressure boilers. A boiler tank, from which apor, such as steam, normally exits via a main vent, is provided with a vertical side tube connected to the tank at the desired low liquid level. When the liquid level falls to the level of the side tube vapor escapes therethrough causing heating of a temperature sensitive device located in the side tube, which, for example, may activate a liquid supply means for adding liquid to the boiler tank. High liquid level in the boiler tank blocks entry of vapor into the side tube, allowing the temperature sensitive device to cool, for example, to ambient temperature.

  6. Liquid level detector

    DOE Patents [OSTI]

    Grasso, A.P.

    1984-02-21T23:59:59.000Z

    A liquid level detector for low pressure boilers. A boiler tank, from which vapor, such as steam, normally exits via a main vent, is provided with a vertical side tube connected to the tank at the desired low liquid level. When the liquid level falls to the level of the side tube vapor escapes therethrough causing heating of a temperature sensitive device located in the side tube, which, for example, may activate a liquid supply means for adding liquid to the boiler tank. High liquid level in the boiler tank blocks entry of vapor into the side tube, allowing the temperature sensitive device to cool, for example, to ambient temperature.

  7. 1998 federal technical standards workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1998-10-01T23:59:59.000Z

    The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

  8. Noncommutative Standard Model: Model Building

    E-Print Network [OSTI]

    M. Chaichian; P. Presnajder; M. M. Sheikh-Jabbari; A. Tureanu

    2003-08-12T23:59:59.000Z

    A noncommutative version of the usual electro-weak theory is constructed. We discuss how to overcome the two major problems: 1) although we can have noncommutative U(n) (which we denote by $U_{\\star}(n)$) gauge theory we cannot have noncommutative SU(n) and 2) the charges in noncommutative QED are quantized to just $0, \\pm 1$. We show how the problem with charge quantization, as well as with the gauge group, can be resolved by taking $U_{\\star}(3)\\times U_{\\star}(2)\\times U_{\\star}(1)$ gauge group and reducing the extra U(1) factors in an appropriate way. Then we proceed with building the noncommutative version of the standard model by specifying the proper representations for the entire particle content of the theory, the gauge bosons, the fermions and Higgs. We also present the full action for the noncommutative Standard Model (NCSM). In addition, among several peculiar features of our model, we address the {\\it inherent} CP violation and new neutrino interactions.

  9. EFFECT OF HYDROTHERMAL TREATMENT ON PHYSICOCHEMICAL1 PROPERTIES OF WHEAT, WAXY AND STANDARD MAIZE STARCHES2

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 EFFECT OF HYDROTHERMAL TREATMENT ON PHYSICOCHEMICAL1 PROPERTIES OF WHEAT, WAXY AND STANDARD MAIZE.10.005 #12;2 ABSTRACT18 Standard maize (SMS), waxy maize (WMS) and wheat (WTS) starches were19 hydrothermally treated at three pressure levels. Effects of D.I.C. processing conditions20 on thermal characteristics

  10. j:rmstern/manuscripts/laborstds fall99.doc LABOR STANDARDS AND TRADE

    E-Print Network [OSTI]

    Shyy, Wei

    and empirical grounds to support the international enforcement and harmonization of labor standards. On a global level, the International Labor Organization (ILO) is best suited to provide a multilateral forum that would serve to strengthen its role and authority in pursuing improved labor standards internationally

  11. Financial Aid Standards for SAP Page 1 Financial Aid Standards for

    E-Print Network [OSTI]

    Leistikow, Bruce N.

    Financial Aid Standards for SAP Page 1 Financial Aid Standards for Satisfactory Academic Progress Affects Your Financial Aid Eligibility Updated February 2012 #12;Financial Aid Standards for SAP Page 2 Standards Progress Review Appeal Process Probation Denied Appeals Reinstatement #12;Financial Aid Standards

  12. International accounting standardization : the institutional legitimacy of a private standards setters

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    1 International accounting standardization : the institutional legitimacy of a private standards standards. Firstly, we examine the need for harmonisation of accounting standards in particular to maintain the internal and external sources of legitimacy and analyses the legitimacy of the International Standard

  13. Voluntary Product Standard PS 20-10 American Softwood Lumber Standard

    E-Print Network [OSTI]

    #12;Voluntary Product Standard PS 20-10 American Softwood Lumber Standard Supersedes Voluntary Product Standard PS 20-05 June 2010 U.S. Department of Commerce Gary Locke, Secretary National Institute of Standards and Technology Patrick D. Gallagher, Director #12;National Institute of Standards & Technology

  14. The effect of isoacids on ruminal fermentation : in vitro trials

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    The effect of isoacids on ruminal fermentation : in vitro trials G. PIVA, F. MASOERO, O. CURTO, isovaleric and valeric acids) showed a stimulating effect on ruminal microflora fermentations, particularly on acetic, propionic and butyric acid production and on microbial protein synthesis. No effects were

  15. Thermal insulation standards for residential building envelopes in Iran

    SciTech Connect (OSTI)

    Eslami, H.M.

    1987-01-01T23:59:59.000Z

    This project develops thermal-insulation standards for residential-building envelopes in Iran which would later serve as the groundwork for development of thermal-insulation regulations in the country. The energy performance of the opaque components of present common construction systems was studied. The results clearly indicate the need for improvement of the energy performance of building components through the application of thermal insulation. The initial cost of insulating the building varied from 2.0-3.5% of the total construction cost, depending on the climate location, form and size of the building. Discounted pay-back period ranged from two to four years. Component performance standards were developed with prescriptive recommendations to meet with the level of technical skills of the parties involved in the implementation and control of standards. The macro-economic assessment of insulation standards proves annual savings of billions of Rials on the national level and also the creation of more jobs in construction-related industries.

  16. Tiltmeter leveling mechanism

    DOE Patents [OSTI]

    Hunter, Steven L. (Livermore, CA); Boro, Carl O. (Milpitas, CA); Farris, Alvis (late of Byron, CA)

    2002-01-01T23:59:59.000Z

    A tiltmeter device having a pair of orthogonally disposed tilt sensors that are levelable within an inner housing containing the sensors. An outer housing can be rotated to level at least one of the sensor pair while the inner housing can be rotated to level the other sensor of the pair. The sensors are typically rotated up to about plus or minus 100 degrees. The device is effective for measuring tilts in a wide range of angles of inclination of wells and can be employed to level a platform containing a third sensor.

  17. New and revised standards for coke production

    SciTech Connect (OSTI)

    G.A. Kotsyuba; M.I. Alpatov; Y.G. Shapoval [Giprokoks, the State Institute for the Design of Coke-Industry Enterprises, Kharkov (Ukraine)

    2009-07-15T23:59:59.000Z

    The need for new and revised standards for coke production in Ukraine and Russia is outlined. Such standards should address improvements in plant operation, working conditions, environmental protection, energy conservation, fire and explosion safety, and economic indices.

  18. Status of Revisions to ASHRAE Standard 62

    E-Print Network [OSTI]

    Gallo, F. M.

    1998-01-01T23:59:59.000Z

    occupancies. This standard has also been cited in court to help demonstrate compliance with state-of the- art indoor environmental design. In August 1996, ASHRAE released for public review Standard 62-1989R, the highly controversial proposed revisions...

  19. Information Technology: American National Standard for

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format Publication 500-245 Information Technology: American National Standard for Information Systems-- Data Format for the Interchange of Fingerprint, Facial, & Scar Mark & Tattoo (SMT) Information Sponsored by Information Technology

  20. Information Technology: American National Standard for Information

    E-Print Network [OSTI]

    Information Technology: American National Standard for Information Systems-- Data Format 500-275 Information Technology: American National Standard for Information Systems-- Data Format Coleman, and Patrice Yuh, Editors Sponsored by Information Access Division Information Technology

  1. Optimizing secure communication standards for disadvantaged networks

    E-Print Network [OSTI]

    Okano, Stephen Hiroshi

    2009-01-01T23:59:59.000Z

    We present methods for optimizing standardized cryptographic message protocols for use on disadvantaged network links. We first provide an assessment of current secure communication message packing standards and their ...

  2. Late standardization and technological catch-up

    E-Print Network [OSTI]

    Ratanawaraha, Apiwat, 1972-

    2006-01-01T23:59:59.000Z

    In this study, we examine the process of "late standardization," in which latecomers engage in standards activities in order to move towards and beyond the technological frontier. Based on case studies of latecomers in the ...

  3. FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY

    E-Print Network [OSTI]

    .................................................................................... 21 1.2.4. Food irradiation ....1 FOOD STANDARDS AGENCY SCOTTISH ENVIRONMENT PROTECTION AGENCY Radioactivity in Food, Fisheries and Aquaculture Science on behalf of the Food Standards Agency and the Scottish Environment

  4. Nanoparticle Measurements and Standards for Biomedical and

    E-Print Network [OSTI]

    Magee, Joseph W.

    Nanoparticle Measurements and Standards for Biomedical and Health Applications NANOMATERIALS Our consensus standards for characterization of biomedical nanoparticles are currently under development within for the biomedical and EHS sectors. Approach Materials Science and Engineering Laboratory Taking therapeutic

  5. A Standard format for Les Houches event files

    SciTech Connect (OSTI)

    Alwall, J.; Ballestrero, A.; Bartalini, P.; Belov, S.; Boos, E.; Buckley, A.; Butterworth, J.M.; Dudko, L.; Frixione, S.; Garren, L.; Gieseke, S.; Gusev, A.; Hinchliffe,I.; Huston, J.; Kersevan, B.; Krauss, F.; Lavesson, N.; Lonnblad, L.; Maina, E.; Maltoni, F.; Mangano, M.L.; /Louvain U. /Dresden, Tech. U. /Karlsruhe U., TP /Democritos Nucl. Res.Ctr. /INFN, Genoa /INFN, Turin /Turin U. /Cracow, INP /Dubna, JINR /SINP, Moscow /Serpukhov, IHEP /Ljubljana U. /Lund U. /CERN /Zurich, ETH /Cambridge U. /Durham U., IPPP/University Coll. London /Manchester U. /Fermilab /LBL, Berkeley; ,

    2006-09-01T23:59:59.000Z

    A standard file format is proposed to store process and event information, primarily output from parton-level event generators for further use by general-purpose ones. The information content is identical with what was already defined by the Les Houches Accord five years ago, but then in terms of Fortran commonblocks. This information is embedded in a minimal XML-style structure, for clarity and to simplify parsing.

  6. The Building Standard (Scotland) Amendment Regulations 1964 

    E-Print Network [OSTI]

    Noble, Michael

    1964-01-01T23:59:59.000Z

    STATUTORY INSTRUMENTS 1964 No. 802 (S. 50) BUILDING AND BUILDINGS The Building Standards (Scotland) Amendment Regulations 1964...

  7. Appliance Standards and Rulemaking Federal Advisory Committee...

    Energy Savers [EERE]

    Committee provides advice and recommendations related to the following: * Development of minimum efficiency standards for residential appliances and commercial equipment, *...

  8. Appliance Standards and Rulemaking Federal Advisory Committee...

    Energy Savers [EERE]

    of the National Energy Laboratories Buildings Home About Emerging Technologies Residential Buildings Commercial Buildings Appliance & Equipment Standards Building Energy Codes...

  9. 1996 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1996-07-01T23:59:59.000Z

    The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOE representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.

  10. How to reconcile product standardization and diversity of agricultural practices? A challenge for research-action in partnership: the case of farmers' organizations in Costa

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    .) with high level risks related to price variations in international markets. Farmers' organizations play standards. In Costa Rica three stakeholders; a farmers' organization MNC (Mesa Nacional CaHow to reconcile product standardization and diversity of agricultural practices? A challenge

  11. Economic Impact of Standard Reference Materials

    E-Print Network [OSTI]

    00-1 Planning Report Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Administration #12;February 2000 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final-006 Economic Impact of Standard Reference Materials for Sulfur in Fossil Fuels Final Report February 2000

  12. NIST Standards in Trade Workshops Increase

    E-Print Network [OSTI]

    NIST Standards in Trade Workshops Increase Trade Opportunities and Exports for U.S. Industry Since 1995, U.S. industry has looked to the NIST Standards in Trade (SIT) Workshop Program to provide opportunities for cooperation on topics related to standards, conformity assessment and trade that are important

  13. -Standard -PS 3.18-2008

    E-Print Network [OSTI]

    Rumolo, Giovanni

    - Standard - PS 3.18-2008 Digital Imaging and Communications in Medicine (DICOM) Part 18: Web and Pan American Copyright Conventions. #12;PS 3.18-2008 Page 2 - Standard - NOTICE AND DISCLAIMER that there is unanimous agreement among every person participating in the development of this document. NEMA standards

  14. Standards for Barrier-Free Campus

    E-Print Network [OSTI]

    Kambhampati, Patanjali

    Standards for Barrier-Free Campus Office for Students with Disabilities University Planning Office June 2004 F:\\PROJECTS\\Disabled\\ACCESS04.doc #12;INTRODUCTION The McGill standards for barrier-free and universal design (hereafter referred to as the McGill Standards) are the minimum requirements

  15. Standardization of mathematical documents Mika Seppala

    E-Print Network [OSTI]

    Seppala, Mika

    Standardization of mathematical documents Mika Sepp¨al¨a Euromath Bulletin, Vol. 1, No. 1, August 1992 (5 ­ 6) Standardization is a key issue in putting new technology into common use. Unfortunately chosen standards, like the different widths of train tracks in Eu- ropean countries, cause problems

  16. Standard Photometric Systems Michael S. Bessell

    E-Print Network [OSTI]

    Harrison, Thomas

    1 Standard Photometric Systems Michael S. Bessell Research School of Astronomy and Astrophysics: photometric,spectroscopic catalogs. ABSTRACT: Standard star photometry dominated the second part of the 20th of photodetectors improved and the wavelength range extended further to the red, standard systems were modi ed

  17. Standardization of corpus texts for the NEID

    E-Print Network [OSTI]

    Scannell, Kevin Patrick

    Standardization of corpus texts for the NEID Kevin P. Scannell Saint Louis University May 22, 2009, on paper Entries drafted between Mar. '50 ­ Aug. '56 Standard reference since its publication in 1959 Oifigiúil "The Official Standard" for Irish spelling and grammar, laid out in the 1940's and 1950's

  18. Page 1 of 4 SUBCOMMITTEE ON STANDARDS

    E-Print Network [OSTI]

    Page 1 of 4 CHARTER of the SUBCOMMITTEE ON STANDARDS COMMITTEE ON TECHNOLOGY NATIONAL SCIENCE AND TECHNOLOGY COUNCIL A. Official Designation The Subcommittee on Standards (SoS) is hereby re Administration policy on the Federal Government's approach to engagement in standards development and use

  19. PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS

    E-Print Network [OSTI]

    PROPOSED 2013 BUILDING ENERGY EFFICIENCY STANDARDS Title 24, Part 6, and Associated400201200415 DAY #12;2013 Building Energy Efficiency Standards Page 1 NOTICE NOTICE This version of the 2013 Building Energy Efficiency Standards is a marked version; that is, it contains underlined or struck

  20. STANDARD DATA FILES FOR COMPUTER THERMAL SIMULATION

    E-Print Network [OSTI]

    Amor, Robert

    STANDARD DATA FILES FOR COMPUTER THERMAL SIMULATION OF SOLAR LOW ENERGY NON-RESIDENTIAL BUILDINGS has been collated into descriptions of standard buildings to provide starting points for designers); Weather File Analyses (6) Standard Model Building Descriptions 6 Testing of Model Buildings 7 Summary 7

  1. The JPEG 2000 Still Image Compression Standard

    E-Print Network [OSTI]

    Mignotte, Max

    Organization for Standardization (ISO), the International Tele- communications Union (ITU), and the Inter, and Touradj Ebrahimi T he development of standards (emerging and es- tablished) by the International, testing and documenting the algorithm. JPEG became Draft International Standard (DIS) in 1991

  2. E-Print Network 3.0 - adoptive immunotherapy trials Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    immunotherapy, corticosteroids... , systemic lupus erythematosus, pso- riasis, gout and allograft rejection. In non-randomized, open trials Source: Utrecht, Universiteit -...

  3. Multi-objective fuel policies: Renewable fuel standards versus Fuel greenhouse gas intensity standards

    E-Print Network [OSTI]

    Rajagopal, Deepak

    2010-01-01T23:59:59.000Z

    Gas Reductions under Low Carbon Fuel Standards? Americanto Implement the Low Carbon Fuel Standard, Volume I Sta?Paper Series Multi-objective fuel policies: Renewable fuel

  4. 2012 DRY BEAN YIELD TRIALS J.D. Kelly, E. Wright, N. Blakely, and J. Heilig

    E-Print Network [OSTI]

    bush cranberry test; 56-entry kidney test; 56-entry preliminary kidney test; 5- entry mayacoba test; 64 organic trials in Tuscola county. All trials were direct harvested except for kidney, cranberry, drought yields were recorded in the kidney and cranberry trials. Screening for resistance to common bacterial

  5. 2011 DRY BEAN YIELD TRIALS J.D. Kelly, E. Wright, N. Blakely, and J. Heilig

    E-Print Network [OSTI]

    and regional test that includes pinto, GN, red and pinks. At Montcalm two bush cranberry tests with 128 and 72 nitrogen fixation (BNF) test. All trials at SVREC were direct harvested and the kidney, cranberry, drought/acre were recorded in the kidney and cranberry trials. The BeanCAP drought trial showed good early moisture

  6. ClinicalTrials.gov Has Been Restored From: NIH-Alert (NIH/OD)

    E-Print Network [OSTI]

    Eichler, Evan

    ClinicalTrials.gov Has Been Restored From: NIH-Alert (NIH/OD) Sent: Friday, October 04, 2013 12:58 PM To: nih-alert@list.nih.gov Cc: Rockey, Sally (NIH/OD) [E] Subject: Access to ClinicalTrials.gov Restored NIH has restored access to the ClinicalTrials.gov site during the current lapse in government

  7. International Experience in Standards and Labeling Programs for Rice Cookers

    SciTech Connect (OSTI)

    Zhou, Nan; Zheng, Nina

    2008-05-01T23:59:59.000Z

    China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been working with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cook

  8. National Agenda for Hydrogen Codes and Standards

    SciTech Connect (OSTI)

    Blake, C.

    2010-05-01T23:59:59.000Z

    This paper provides an overview of hydrogen codes and standards with an emphasis on the national effort supported and managed by the U.S. Department of Energy (DOE). With the help and cooperation of standards and model code development organizations, industry, and other interested parties, DOE has established a coordinated national agenda for hydrogen and fuel cell codes and standards. With the adoption of the Research, Development, and Demonstration Roadmap and with its implementation through the Codes and Standards Technical Team, DOE helps strengthen the scientific basis for requirements incorporated in codes and standards that, in turn, will facilitate international market receptivity for hydrogen and fuel cell technologies.

  9. Technical Standards Newsletter - June 2008 | Department of Energy

    Broader source: Energy.gov (indexed) [DOE]

    s... 8 An Overview of the International Organization for Standardization... 11 Technical Standards Manager Spotlight......

  10. Standard-C hydrogen monitoring system, system design description

    SciTech Connect (OSTI)

    Schneider, T.C., Westinghouse Hanford

    1996-08-29T23:59:59.000Z

    Standard-C cabinet arrangement system design description for the Standard Hydrogen Monitoring System.

  11. DOE-TSPP-06; Coordination of DOE Technical Standard

    Broader source: Energy.gov (indexed) [DOE]

    5 2.1.6 Coordination of Technical Qualification Standards and Information Architecture Standards......

  12. DOE Technical Standards Program Procedures, 2009, DOE-TSPP-6

    Broader source: Energy.gov (indexed) [DOE]

    2.1.6 Coordination of Technical Qualification Standards and Information Architecture Standards ......

  13. Seminar on building codes and standards

    SciTech Connect (OSTI)

    Not Available

    1980-01-01T23:59:59.000Z

    A seminar was conducted for state building code officials and state energy officials to discuss the following: status of the states regulatory activities for energy conservation standards for buildings; the development, administration, and enforcement processes for energy conservation standards affecting new construction; lighting and thermal standards for existing buildings; status of the development and implementation of the Title III Program, Building Energy Performance Standards (BEPS); and current status of the State Energy Conservation Program. The welcoming address was given by John Wenning and the keynote address was delivered by John Millhone. Four papers presented were: Building Energy Performance Standards Development, James Binkley; Lighting Standards in Existing Buildings, Dorothy Cronheim; Implementation of BEPS, Archie Twitchell; Sanctions for Building Energy Performance Standards, Sue Sicherman.

  14. 1993 DOE technical standards managers workshop: Proceedings

    SciTech Connect (OSTI)

    Not Available

    1993-12-31T23:59:59.000Z

    This workshop is focused on the benefits of the DOE technical standards program, which is focused toward the preferred use of non-Government standards for DOE activities and the development of DOE technical standards when non-Government standards are not available or are inappropriate. One goal of the program is to replace redundant site-specific standards with more universally accepted documents that have been scrutinized by experts. This replacement is discussed at the workshop along with the problems encountered and solutions found. The workshop provided an opportunity for geographically dispersed people to meet and advance their standards knowledge and efforts to support the program. Safety issues have been the driving force behind the program to date. Several companies offer products and services that support the development, processing, and retrieval of standards. This document mostly comprise vugraphs.

  15. Economical standard quantum process tomography

    E-Print Network [OSTI]

    Xiaohua Wu; Ke Xu

    2010-11-30T23:59:59.000Z

    Recently, Bendersky \\emph{et al.} developed a method to complete the task of characterizing an arbitrary $\\chi$ matrix element in a scalable way, Phys. Rev. Lett. Vol. \\textbf{100}, 190403(2008), where an auxiliary system was needed. In present work, we shall show that the same task can also be completed within the scheme of standard quantum process tomography (SQPT) where there is no requirement for ancilla. Our method depends on two observations: With the elaborately chosen operators basis, the SQPT may have an economical form where a single run of experiment, in which we measure the expectation value of a chosen operator in the outport of the quantum channel with a known input, is sufficient to characterize a selected $\\chi$ matrix element; With the progress recently achieved in quantum entanglement detection, we also find that the number of the experimental settings to realize the experiment for the selected $\\chi$ matrix element does not exceed 2N for the N-qubits system. For practice, our scheme can be applied for the cases where the controlled two-body interaction is neither available nor desirable.

  16. "THE WORK OF GLOBALIZATION": HOW STANDARDIZATION MAY IMPACT

    E-Print Network [OSTI]

    Boyer, Edmond

    of standardization and certification, in which governmental agencies are deeply involved: ISO (International Standards Organization), CEN (European Committee for Standardization) and AFNOR (French Standards labor market: that of the international standardization of labor. In the above statement, one clearly

  17. Improved freezing level retrieval

    E-Print Network [OSTI]

    Hong, Sungwook

    2002-01-01T23:59:59.000Z

    TRMM Microwave Imager(TMI)-based passive microwave retrieval techniques result in biased estimates of the freezing level and rainfall over the east Pacific in the Inter Tropical Convergence Zone (ITCZ). Passive microwave rainfall estimates...

  18. ISS-005, Laptop Encryption Standard 1/2 UCIT INFORMATION SECURITY STANDARDS

    E-Print Network [OSTI]

    Habib, Ayman

    ISS-005, Laptop Encryption Standard 1/2 UCIT INFORMATION SECURITY STANDARDS Laptop Encryption Standard Definitions 1 1.1 Encryption: The process used to protect the confidentiality and integrity contained within it is appropriately encrypted. Applicability 3 This standard applies to all UofC owned

  19. 5. ODBMS Standards Many different groups are engaged in developing standards that use object concepts. These

    E-Print Network [OSTI]

    Reverbel, Francisco

    135 5. ODBMS Standards Many different groups are engaged in developing standards that use object concepts. These include: . application­specific standards groups, e.g. --- CAD Framework Initiative) --- ANSI X3H6 (CASE) --- ANSI X3H4 (IRDS) . groups working on generic object standards --- ISO ODP, ANSI X3

  20. Standards for Serials Metadata and for Terms of Availability 1 Descriptive Standards for Serials Metadata and

    E-Print Network [OSTI]

    Carr, Leslie

    Standards for Serials Metadata and for Terms of Availability 1 Descriptive Standards for Serials Metadata and Standards for Terms of Availability Metadata Two related eLib Supporting Studies commissioned by UKOLN David Martin Mark Bide Book Industry Communication AUGUST 1997 #12;Standards for Serials Metadata

  1. Material Standards for EHS for Engineered Nanoscale Materials Material Standards for

    E-Print Network [OSTI]

    Magee, Joseph W.

    #12;#12;Material Standards for EHS for Engineered Nanoscale Materials Material Standards of Standards and Technology, Gaithersburg, MD Workshop Co-Chairs and Principle Report Editors Dianne L. Poster, John A. Small, Michael T. Postek National Institute of Standards and Technology Sponsored by U

  2. ISS-011, Vulnerability Assessment Standard 1/3 UCIT INFORMATION SECURITY STANDARDS

    E-Print Network [OSTI]

    Habib, Ayman

    ISS-011, Vulnerability Assessment Standard 1/3 UCIT INFORMATION SECURITY STANDARDS Vulnerability Assessment Standard Rationale 1 To enable timely identification and mitigation of vulnerabilities and security flaws affecting computing devices within UofC's computing environment. Scope 2 2.1 This standard

  3. Hardness Standardization Our objective is to standardize and improve hardness measurement

    E-Print Network [OSTI]

    by Standard Development Organizations (SDOs) such as ASTM International and the International Organization and Measures (BIPM) during the development of international test method standards, by those performing hardnessHardness Standardization METALS Our objective is to standardize and improve hardness measurement

  4. Proposed Revisions to Light Truck Fuel Economy Standard (released in AEO2006)

    Reports and Publications (EIA)

    2006-01-01T23:59:59.000Z

    In August 2005, the National Highway Traffic Safety Administration (NHTSA) published proposed reforms to the structure of CAFE standards for light trucks and increases in light truck Corporate Average Fuel Economy (CAFE) standards for model years 2008 through 201. Under the proposed new structure, NHTSA would establish minimum fuel economy levels for six size categories defined by the vehicle footprint (wheelbase multiplied by track width), as summarized in Table 3. For model years 2008 through 2010, the new CAFE standards would provide manufacturers the option of complying with either the standards defined for each individual footprint category or a proposed average light truck fleet standard of 22.5 miles per gallon in 2008, 23.1 miles per gallon in 2009, and 23.5 miles per gallon in 2010. All light truck manufacturers would be required to meet an overall standard based on sales within each individual footprint category after model year 2010.

  5. Optimal Time-Trial Bicycle Racing with Headwinds and Tailwinds

    E-Print Network [OSTI]

    Anton, A Brad

    2013-01-01T23:59:59.000Z

    Many time-trial and triathlon bicycle races take place on relatively flat, closed-circuit courses. In the absence of hills, riding-speed is limited almost solely by aerodynamic drag; consequently, winds can have a big effect on elapsed times. I analyze the special case of a straight out-and-back race in a steady wind, assuming the rider has a given total amount of energy to expend and can choose only two speeds - the aided speed with tailwind and the hindered speed into headwind. In this ideal circumstance the problem of choosing optimal riding speeds reduces to a constrained nonlinear optimization that can be solved with elementary calculus. My analysis reveals a practical rule of thumb that can be used more generally to choose optimal riding speeds for time-trial racing on closed-circuit courses in the presence of headwinds and tailwinds.

  6. Mental fatigue evaluation by steroid level measurement in Parotid fluid

    E-Print Network [OSTI]

    Singh, Harpal

    1968-01-01T23:59:59.000Z

    Play 1968 Major Subject. : Inc'ustrial Engineering MENTAL FATIGUE EVALUATION BY STEROID LEVEL MEASURLMENT. IN PAROTID FLUID A Thesis by HARPAL SINGH ApproveH as to tyle and. content by: P'hpirman of Committee) (Memb sr ) 1 1 PREFACE Alta...&ough indu trial engineering has had a phenomenal growth rate, a certain basic avenue has not been explored. The avenue 1 am refer- ring to is that of human fatigue and related phenomena. The reasons for this neglect are basically two: (1) Tnvestigation...

  7. Techno-Economic Analysis of Indian Draft Standard Levels for Room Air Conditioners

    E-Print Network [OSTI]

    McNeil, Michael A.; Iyer, Maithili

    2008-01-01T23:59:59.000Z

    the current cost of production of 3.5 Rs per kWh. It isthe average cost of production to be 3.50 Rs. per kWh, or $the cost of production significantly at 4.80 Rs. per kWh. As

  8. Executive Summary The Payment Card Industry Data Security Standard (PCI DSS) requires Level 1 merchants and

    E-Print Network [OSTI]

    Fisher, Kathleen

    system components in order to support business growth. Change control is a complex process merchants and service providers to undergo an onsite assessment of their security systems and procedures processes fail, when changes are made without adequately considering the effect on security, and when

  9. A measure of technological level for the Standard Cross-Cultural Sample

    E-Print Network [OSTI]

    Eff, E. Anthon; Maiti, Abhradeep

    2013-01-01T23:59:59.000Z

    Water Fetching) are present in all societies, and v2137 (Planting) is identical to v2139 (Harvesting).

  10. A SURVEY OF STATE-LEVEL COST ESTIMATES OF RENEWABLES PORTFOLIO STANDARDS

    E-Print Network [OSTI]

    Barbose, Galen

    2014-01-01T23:59:59.000Z

    Energy Efficiency and Renewable Energy (Solar TechnologiesRPS costs, per unit of renewable energy generation, rangedFlores-Espino National Renewable Energy Laboratory 15013

  11. A Survey of State-Level Cost and Benefit Estimates of Renewable Portfolio Standards

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLasDelivered‰PNGExperience hands-onASTROPHYSICSHeResearch StochasticA Surprising PathAAA

  12. Searches for the Standard Model Higgs Boson at CMS

    E-Print Network [OSTI]

    Marco Pieri; for the CMS Collaboration

    2012-05-13T23:59:59.000Z

    We searched for the standard model Higgs boson in many different channels using approximately 5 fb-1 of 7 TeV pp collisions data collected with the CMS detector at LHC. Combining the results of the different searches we exclude at 95% confidence level a standard model Higgs boson with mass between 127.5 and 600 GeV. The expected 95% confidence level exclusion if the Higgs boson is not present is from 114.5 and 543 GeV. The observed exclusion is weaker than expected at low mass because of some excess that is observed below about 128 GeV. The most significant excess is found at 125 GeV with a local significance of 2.8 sigma. It has a global significance of 0.8 sigma when evaluated in the full search range and of 2.1 sigma when evaluated in the range 110-145 GeV. The excess is consistent both with background fluctuation and a standard model Higgs boson with mass of about 125 GeV, and more data are needed to investigate its origin.

  13. 1994 DOE Technical Standards Program Workshop: Proceedings

    SciTech Connect (OSTI)

    Spellman, D.J.

    1994-12-31T23:59:59.000Z

    The DOE Technical Standards Program has been structured to provide guidance and assistance for the development, adoption, and use of voluntary standards within the Department. OMB Circular A-119, ``Federal Participation in the Development and Use of Voluntary Standards`` establishes the policy to be followed in working with voluntary standards bodies, and in adopting and using voluntary standards whenever feasible. The DOE Technical Standards Program is consistent with this policy and is dedicated to the task of promoting its implementation. The theme of this year`s workshop is ``Standards Initiatives in Environmental Management fostering the development and use of industry standards for safe, environmentally responsible operations.`` The objective of the workshop is to increase the participant`s awareness of the standardization activities taking place nationally and internationally and the impact of these activities on their efforts, and to facilitate the exchange of experiences, processes, and tools for implementing the program. Workshop sessions will include presentations by industry and Government notables in the environment, safety, and health arena with ample opportunity for everyone to ask questions and share experiences. There will be a breakout session which will concentrate on resolution of issues arising from the implementation of the DOE Technical Standards Program and a plenary session to discuss the plans developed by the breakout groups. Many organizations provide services and products which support the development, processing, distribution, and retrieval of standards. Those organizations listed at the end of the agenda will have exhibits available for your perusal throughout the workshop. Last year`s workshop was very successful in stimulating an understanding of an interest in the standards program. This year, we hope to build on that success and provide an environment for the synergism of ideas to enhance the program and advance its implementation.

  14. Development of energy-efficiency standards for Indian refrigerators

    SciTech Connect (OSTI)

    Bhatia, P.

    1999-07-01T23:59:59.000Z

    The application of advanced techniques in engineering simulation and economic analysis for the development of efficiency standards for Indian refrigerators is illustrated in this paper. A key feature of this methodology is refrigerator simulation to generate energy savings for a set of energy-efficient design options and life-cycle cost (LCC) analysis with these design options. The LCC of a refrigerator is analyzed as a function of five variables: nominal discount rate, fuel price, appliance lifetime, incremental price, and incremental energy savings. The frequency of occurrence of the LCC minimum at any design option indicates the optimum efficiency level or range. Studies carried out in the US and European Economic Community show that the location of the LCC minimum under different scenarios (e.g., variable fuel price, life-time, discount rate, and incremental price) is quite stable. Thus, an efficiency standard can be developed based on the efficiency value at the LCC minimum. This paper examines and uses this methodology in developing efficiency standards for Indian refrigerators. The potential efficiency standard value is indicated to be 0.65 kWh/day for a 165-liter, CFC-based, manual defrost, single-door refrigerator-freezer.

  15. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    SciTech Connect (OSTI)

    Sherman, Max H.; Walker, Iain S.

    2011-04-01T23:59:59.000Z

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outdoor pollutant levels are high, the importance of minimizing energy use particularly during times of peak electricity demand, and how the energy used to condition air as part of ventilation system operation changes with outdoor conditions. Dynamic control of ventilation systems can provide ventilation equivalent to or better than what is required by standards while minimizing energy costs and can also add value by shifting load during peak times and reducing intake of outdoor air contaminants. This article describes the logic that enables dynamic control of whole-house ventilation systems to meet the intent of ventilation standards and demonstrates the dynamic ventilation system control concept through simulations and field tests of the Residential Integrated Ventilation-Energy Controller (RIVEC).

  16. Conformal Extensions of the Standard Model with Veltman Conditions

    E-Print Network [OSTI]

    Oleg Antipin; Matin Mojaza; Francesco Sannino

    2014-04-16T23:59:59.000Z

    Using the renormalisation group framework we classify different extensions of the standard model according to their degree of naturality. A new relevant class of perturbative models involving elementary scalars is the one in which the theory simultaneously satisfies the Veltman conditions and is conformal at the classical level. We term these extensions perturbative natural conformal (PNC) theories. We show that PNC models are very constrained and thus highly predictive. Among the several PNC examples that we exhibit, we discover a remarkably simple PNC extension of the standard model in which the Higgs is predicted to have the experimental value of the mass equal to 126 GeV. This model also predicts the existence of one more standard model singlet scalar boson with a mass of 541 GeV and the Higgs self-coupling to emerge radiatively. We study several other PNC examples that generally predict a somewhat smaller mass of the Higgs to the perturbative order we have investigated them. Our results can be a useful guide when building extensions of the standard model featuring fundamental scalars.

  17. 1994 Building energy codes and standards workshops: Summary and documentation

    SciTech Connect (OSTI)

    Sandahl, L.J.; Shankle, D.L.

    1994-09-01T23:59:59.000Z

    During the spring of 1994, Pacific Northwest Laboratory (PNL), on behalf of the U.S. Department of Energy (DOE) Office of Codes and Standards, conducted five two-day Regional Building Energy Codes and Standards workshops across the United States. Workshops were held in Chicago, Philadelphia, Atlanta, Dallas, and Denver. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing state building codes in their states. The workshops provided an opportunity for state and other officials to learn more about the Energy Policy Act of 1992 (EPAct) requirements for residential and commercial building energy codes, the Climate Change Action Plan, the role of the U.S. Department of Energy and the Building Energy Standards Program at Pacific Northwest Laboratory, the commercial and residential codes and standards, the Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. In addition to receiving information on the above topics, workshop participants were also encouraged to inform DOE of their needs, particularly with regard to implementing building energy codes, enhancing current implementation efforts, and building on training efforts already in place. This paper documents the workshop findings and workshop planning and follow-up processes.

  18. Trial Protocol: Communicating DNA-based risk assessments for Crohn's disease: a randomised controlled trial assessing impact upon stopping smoking

    E-Print Network [OSTI]

    Whitwell, Sophia C L; Mathew, Christopher G; Lewis, Cathryn M; Forbes, Alastair; Watts, Sally; Sanderson, Jeremy; Hollands, Gareth J; Prevost, A Toby; Armstrong, David; Kinmonth, Ann Louise; Sutton, Stephen; Marteau, Theresa M

    2011-01-19T23:59:59.000Z

    -cessation treatment: One-year outcomes of a randomized trial. Addictive Behaviors 1997, 22:741-751. 13. Lerman C, Gold K, Audrain J, Lin TH, Boyd NR, Orleans CT, Wilfond B, Louben G, Caporaso N: Incorporating biomarkers of exposure and genetic susceptibility... motivated to stop, to encourage use of the NHS Stop Smoking Services. Procedure Participant recruitment First degree relatives of people affected by Crohn’s dis- ease will be identified via three routes: i. Probands receiving care through hospital services...

  19. Surface Water Quality Standards (New Jersey)

    Broader source: Energy.gov [DOE]

    These standards establish the designated uses and antidegradation categories of the State's surface waters, classify surface waters based on those uses (i.e., stream classifications), and specify...

  20. Surface Water and Wetland Standards (North Carolina)

    Broader source: Energy.gov [DOE]

    These rules state the standards for classification of water supply. Each stream in North Carolina has a classification based upon its designated uses. These rules provide the Environmental...

  1. New Energy Efficiency Standards for Commercial Refrigeration...

    Office of Environmental Management (EM)

    for Commercial Refrigeration Equipment to Cut Businesses' Energy Bills and Carbon Pollution New Energy Efficiency Standards for Commercial Refrigeration Equipment to Cut...

  2. Gene Calling Standards (GSC8 Meeting)

    ScienceCinema (OSTI)

    Kyrpides, Nikos [Genome Biology Program, DOE JGI

    2011-04-28T23:59:59.000Z

    The Genomic Standards Consortium was formed in September 2005. It is an international, open-membership working body which promotes standardization in the description of genomes and the exchange and integration of genomic data. The 2009 meeting was an activity of a five-year funding "Research Coordination Network" from the National Science Foundation and was organized held at the DOE Joint Genome Institute with organizational support provided by the JGI and by the University of California - San Diego. Nikos Kyrpides of the DOE Joint Genome Institute discusses gene calling standards at the Genomic Standards Consortium's 8th meeting at the DOE JGI in Walnut Creek, Calif. on Sept. 10, 2009.

  3. Non-standard Neutrino Oscillations at Icecube

    E-Print Network [OSTI]

    M. C. Gonzalez-Garcia

    2006-12-19T23:59:59.000Z

    In this talk I review the potential of Icecube for revealing physics beyond the standard model in the oscillation of atmospheric neutrinos.

  4. Evergreen Sustainable Development Standard for Affordable Housing

    Broader source: Energy.gov [DOE]

    The Washington State Department of Commerce created the Evergreen Sustainable Development Standard, a set of green building criteria that is required for any affordable housing project applying for...

  5. HEV, PHEV, BEV Test Standard Validation

    Broader source: Energy.gov (indexed) [DOE]

    BEV Test Standard Validation 2011 DOE Hydrogen Program and Vehicle Technologies Annual Merit Review May 10, 2011 Michael Duoba Argonne National Laboratory Sponsored by Lee Slezak...

  6. Earthjustice, Appliance Standards Awareness Project, Natural...

    Office of Environmental Management (EM)

    Council - Comments in response to DOE solicitation of views on the implementation of test procedure waivers for large capacity clothes washers Earthjustice, Appliance Standards...

  7. Energy Conservation Standards Rulemaking Peer Review Report ...

    Broader source: Energy.gov (indexed) [DOE]

    for Peer Review." peerreviewreport021507.pdf More Documents & Publications Energy Conservation Standards Rulemaking Peer Review Report Water Power Program: 2010 Peer Review...

  8. Energy Conservation Standards Rulemaking Peer Review Report ...

    Broader source: Energy.gov (indexed) [DOE]

    & Publications Report to Congress on Appliance Energy Efficiency Rulemakings Energy Conservation Standards Rulemaking Peer Review Report 2014-05-14 Issuance: Energy Conservation...

  9. Appliance Efficiency Standards and Price Discrimination

    E-Print Network [OSTI]

    Spurlock, Cecily Anna

    2014-01-01T23:59:59.000Z

    2: Definition of Energy Efficiency-Based Market Segments/Minimum & ENERGY STAR Standards Market Segment Descriptiondrops. The markets for large energy consuming appliances are

  10. Chapter 63 General Standards of Performance (Kentucky)

    Broader source: Energy.gov [DOE]

    Kentucky Administrative Regulation Chapter 63, entitled Air Quality: General Standards of Performance, is promulgated under the authority of the Division of Air Quality within the Energy and...

  11. STANDARD OPERATING PROCEDURE ACIDS CONTAINING PHOSPHOROUS

    E-Print Network [OSTI]

    Pawlowski, Wojtek

    12.1 STANDARD OPERATING PROCEDURE for ACIDS CONTAINING PHOSPHOROUS Location(s): ___________________________________________________ Chemical(s): Hypophosphorous acid, methylphosphonic acid, phosphonic acid, phosphoric acid, phosphorous

  12. Implementation Guide of Medical Standards for Firefighters

    Broader source: Energy.gov [DOE]

    These guidelines were prepared to assist the DOE contractor site occupational medical programs in developing NFPA-based firefighter standards that comply with the ADA.

  13. Defining a Standard Metric for Electricity Savings

    E-Print Network [OSTI]

    Koomey, Jonathan

    2009-01-01T23:59:59.000Z

    1991. The Potential for Electricity Efficiency Improvementswww.eia.doe.gov/cneaf/electricity/page/eia860.html>. FigureA STANDARD METRIC FOR ELECTRICITY SAVINGS Jonathan Koomey*,

  14. Requirements Governing Water Quality Standards (West Virginia)

    Broader source: Energy.gov [DOE]

    This rule establishes the requirements governing the discharge or deposit of sewage, industrial wastes and other wastes into waters and establishes water quality standards.

  15. Sharyland Utilities- Commercial Standard Offer Program (Texas)

    Broader source: Energy.gov [DOE]

    Sharyland Utilities offers the Residential and "Hard-to-Reach" Standard Offer Programs, which encourage residential customers to pursue energy saving measures and equipment upgrades in their homes....

  16. ENVIRONMENTAL ASSESSMENT FOR PROPOSED ENERGY CONSERVATION STANDARDS...

    Broader source: Energy.gov (indexed) [DOE]

    of power plant emissiohs. The proposed efficiency standards will gnerally decrease air pollution by decreasing future energy demand. The greatest d6er"eases in air pollution...

  17. Ambient Air Quality Standards (New Mexico)

    Broader source: Energy.gov [DOE]

    This regulation establishes ambient air quality standards for the areas of New Mexico under the jurisdiction of the Environmental Improvement Board. The maximum allowable concentrations of total...

  18. Denton Municipal Electric- Standard Offer Rebate Program

    Broader source: Energy.gov [DOE]

    Within the GreenSense program, Denton Municipal Electric's Standard Offer Program provides rebates to large commercial and industrial customers for lighting retrofits, HVAC upgrades and motor...

  19. Ecotourism and Certification: Setting Standards in Practice

    E-Print Network [OSTI]

    Hook, Robert D.

    2004-01-01T23:59:59.000Z

    Review: Ecotourism and Certification: Setting Standards inMartha Honey (Ed. ). Ecotourism and Certification: SettingAlkaline paper. Tourism and ecotourism are growing rapidly,

  20. Resource Adequacy Standard for the Pacific Northwest

    E-Print Network [OSTI]

    ....................................................................................................... 10 Conditional Value at Risk to regional utilities. The new standard maintains the 2008 philosophy that a reasonable amount of market

  1. Developing Integrated National Design Standards for Offshore...

    Energy Savers [EERE]

    report that summarizes the regulations, standards, and guidelines for the design and operation of offshore wind projects in the United States. In 2012, the American Wind Energy...

  2. Ultrasonic liquid level detector

    DOE Patents [OSTI]

    Kotz, Dennis M. (North Augusta, SC); Hinz, William R. (Augusta, GA)

    2010-09-28T23:59:59.000Z

    An ultrasonic liquid level detector for use within a shielded container, the detector being tubular in shape with a chamber at its lower end into which liquid from in the container may enter and exit, the chamber having an ultrasonic transmitter and receiver in its top wall and a reflector plate or target as its bottom wall whereby when liquid fills the chamber a complete medium is then present through which an ultrasonic wave may be transmitted and reflected from the target thus signaling that the liquid is at chamber level.

  3. ENRAF gauge reference level calculations

    SciTech Connect (OSTI)

    Huber, J.H., Fluor Daniel Hanford

    1997-02-06T23:59:59.000Z

    This document describes the method for calculating reference levels for Enraf Series 854 Level Detectors as installed in the tank farms. The reference level calculation for each installed level gauge is contained herein.

  4. Work Plan Guidelines and Standards Requirement | Department of...

    Broader source: Energy.gov (indexed) [DOE]

    expectations of work scope and quality. These field standards must meet or exceed the minimum standards outlined in the SWS where applicable The field guides and standards may...

  5. Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot Standard Energy Efficiency Data (SEED) Platform Homepage Screenshot Standard Energy Efficiency Data (SEED)...

  6. HOSPITAL LAUNDRY STANDARDS AND ENERGY CONSERVATION: A PROGRAM PLAN

    E-Print Network [OSTI]

    Battles, Donald R.

    2014-01-01T23:59:59.000Z

    STANDARDS AND ENERGY CONSERVATION: LAWRENCE A PROGRAM PLANLAUNDRY STANDARDS AND ENERGY CONSERVATION: A PROGRAM PLANLAUNDRY STANDARDS AND ENERGY CONSERVATION: A PROGRAM PLAN

  7. A Summary of Control System Security Standards Activities in...

    Broader source: Energy.gov (indexed) [DOE]

    sector standards, guidelines, and technical reports, demonstrating standards coverage by security topic. This work focuses on control systems standards applicable to the energy...

  8. Hydrogen Vehicle and Infrastructure Codes and Standards Citations...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Vehicle and Infrastructure Codes and Standards Citations Hydrogen Vehicle and Infrastructure Codes and Standards Citations This document lists codes and standards typically used...

  9. Accelerating the Adoption of Second-Tier Reach Standards forApplicable Appliance Products in China

    SciTech Connect (OSTI)

    Lin, Jiang; Fridley, David

    2007-03-01T23:59:59.000Z

    The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for the mandatory energy information label program. The results provide an assessment of the adoption of reach standards for these two products. Section 3 summarizes on-going collaborations with Shanghai related to early local adoption of reach standards, and presents both the impact and an analysis of barriers to the local adoption of reach standard for air-conditioners. Section 4 offers suggestions for local governments on how to move forward in adopting reach standards in their localities and concludes with a summary of the results and a plan for developing local capacity in order to achieve success in adopting reach standards.

  10. The DiGEMtrial protocol - a randomised controlled trial to determine the effect on glycaemic control of different strategies of blood glucose self-monitoring in people with type 2 diabetes [ISRCTN47464659

    E-Print Network [OSTI]

    Farmer, Andrew J; Wade, Alisha; French, David P; Goyder, Elizabeth; Kinmonth, Ann Louise; Neil, Andrew

    2005-06-16T23:59:59.000Z

    to 1 and 2. The trial has an 80% power at a 5% level of significance to detect a difference in change in the primary outcome, HbA1c of 0.5% between groups, allowing for an attrition rate of 10%. Secondary outcome measures include health service costs...

  11. Forests and soil UK Forestry Standard Guidelines

    E-Print Network [OSTI]

    ; forestry; soil; sustainable forest management; UK Forestry Standard. FCGL006/FC-GB(MMJ)/JCTP-2.5K/NOV11 for sustainable forest management Good forestry practice requirement Element of SFM Reference number LegalForests and soil UK Forestry Standard Guidelines #12;Key to symbols UKFS Requirements

  12. National Institute of Standards and Technology

    E-Print Network [OSTI]

    National Institute of Standards and Technology NIST Campus Gaithersburg, MD NET ZERO ENERGY Campus Gaithersburg, MD NET ZERO ENERGY RESIDENTIAL TEST FACILITY PROJECT: CONSULTANT: SHEET TITLE: SCALE Institute of Standards and Technology NIST Campus Gaithersburg, MD NET ZERO ENERGY RESIDENTIAL TEST FACILITY

  13. Measurements and Standards for Thermoelectric Materials

    E-Print Network [OSTI]

    Measurements and Standards for Thermoelectric Materials CERAMICS Our goal is to develop standard, electrical conductivity, thermal conductivity) for thin film and bulk thermoelectric materials to enable the commercialization of these materials. Objective Impact and Customers · Thermoelectric SRMs and measurement methods

  14. Standard Model Electroweak Measurements at LEP

    E-Print Network [OSTI]

    F. Spano'

    2006-05-19T23:59:59.000Z

    The current status of electroweak physics results from LEP is reviewed. Particular emphasis is placed on the latest results on the properties of the Z and W bosons. The updated status of the global electroweak fit to the standard model and the resulting standard model Higgs mass limits are presented.

  15. MARY H. SAUNDERS Director, Standards Coordination Office

    E-Print Network [OSTI]

    Office, NIST. In this capacity, she represents NIST and its significant interests in the standards.S. and world markets by coordinating Commerce Department strategies, policies and programs with U.S. industries Services Division. In that capacity, she administered a range of standards-related programs to provide

  16. DOE Standard: Fire protection design criteria

    SciTech Connect (OSTI)

    Not Available

    1999-07-01T23:59:59.000Z

    The development of this Standard reflects the fact that national consensus standards and other design criteria do not comprehensively or, in some cases, adequately address fire protection issues at DOE facilities. This Standard provides supplemental fire protection guidance applicable to the design and construction of DOE facilities and site features (such as water distribution systems) that are also provided for fire protection. It is intended to be used in conjunction with the applicable building code, National Fire Protection Association (NFPA) Codes and Standards, and any other applicable DOE construction criteria. This Standard replaces certain mandatory fire protection requirements that were formerly in DOE 5480.7A, ``Fire Protection``, and DOE 6430.1A, ``General Design Criteria``. It also contains the fire protection guidelines from two (now canceled) draft standards: ``Glove Box Fire Protection`` and ``Filter Plenum Fire Protection``. (Note: This Standard does not supersede the requirements of DOE 5480.7A and DOE 6430.1A where these DOE Orders are currently applicable under existing contracts.) This Standard, along with the criteria delineated in Section 3, constitutes the basic criteria for satisfying DOE fire and life safety objectives for the design and construction or renovation of DOE facilities.

  17. Webinar: Introduction to SAE Hydrogen Fueling Standardization

    Broader source: Energy.gov [DOE]

    The Energy Department will present a live webinar titled "Introduction to SAE Hydrogen Fueling Standardization" on Thursday, September 11. The webinar will provide an overview of the SAE Standards SAE J2601 and J2799 and how they are applied to hydrogen fueling for fuel cell electric vehicles (FCEVs).

  18. Title 24, Part 6 2013 Standards

    E-Print Network [OSTI]

    California at Davis, University of

    , by regulation, lighting, insulation climate control system, and other building design and construction standards-rulemaking industry meetings · Workshops on proposed standards · Notice of Proposed Action and "45-day language reliable way to create jobs, save consumers money and cut pollution from the power sector." Governor Jerry

  19. Electric Charge Quantization in Standard Model

    E-Print Network [OSTI]

    O. B. Abdinov; F. T. Khalil-zade; S. S. Rzaeva

    2008-07-28T23:59:59.000Z

    In the framework of Standard Model for the arbitrary values of Higgs and fermions fields hypercharges, taking into account parity invariance of electromagnetic interaction, expressions for the fermions charges, testifying the electric charge quantization are obtained. From the chiral anomalies cancellation condition within one family of leptons and quarks, numerical values of fermions charges, coinciding with standard values of charges have been obtained.

  20. The Economic Impacts of NIST Cholesterol Standards

    E-Print Network [OSTI]

    00-4 Planning Report The Economic Impacts of NIST Cholesterol Standards Program Prepared by: TASC, Inc. for National Institute of Standards & Technology Program Office Strategic Planning and Economic Analysis Group September 2000 U.S Department of Commerce Technology Administration #12;The Economic Impacts

  1. BRAND STANDARDS: PHASE I brand tools

    E-Print Network [OSTI]

    Oyet, Alwell

    , cohesive image. #12;www.mun.ca why brand standards? Strong brands: · Attract talented people: studentswww.mun.ca BRAND STANDARDS: PHASE I new and improved brand tools #12;www.mun.ca What is a brand? #12;www.mun.ca What is a brand? American Marke,ng Associa,on Glossary "A brand

  2. Standard hydrogen monitoring system equipment installation instructions

    SciTech Connect (OSTI)

    Schneider, T.C.

    1996-09-27T23:59:59.000Z

    This document provides the technical specifications for the equipment fabrication, installation, and sitework construction for the Standard Hydrogen Monitoring System. The Standard Hydrogen Monitoring System is designed to remove gases from waste tank vapor space and exhaust headers for continual monitoring and remote sample analysis.

  3. UK Forestry Standard Guidelines Forests and people

    E-Print Network [OSTI]

    UK Forestry Standard Guidelines Forests and people #12;Key to symbols UKFS Requirements for sustainable forest management Element of SFM Reference number Good forestry practice requirement Reference #12;UK Forestry Standard Guidelines Forests and people Forestry Commission: Edinburgh #12;ii Forests

  4. Forests and biodiversity UK Forestry Standard Guidelines

    E-Print Network [OSTI]

    Forests and biodiversity UK Forestry Standard Guidelines #12;Key to symbols UKFS Requirements;Forests and biodiversity Forestry Commission: Edinburgh UK Forestry Standard Guidelines #12;© Crown Commission in 2011. ISBN 978-0-85538-831-7 FORESTRY COMMISSION (2011). Forests and Biodiversity. UK Forestry

  5. STANDARD OPERATING PROCEDURES Annual Site Maintenance

    E-Print Network [OSTI]

    Fischer, Emily V.

    IMPROVE STANDARD OPERATING PROCEDURES SOP 226 Annual Site Maintenance Date Last Modified Modified This standard operating procedure (SOP) describes the procedures for annual maintenance of equipment Sampler Operation Manual #12;SOP 226: Annual Site Maintenance 3 1.0 PURPOSE AND APPLICABILITY

  6. Appliance Efficiency Standards and Price Discrimination

    SciTech Connect (OSTI)

    Spurlock, Cecily Anna

    2013-05-08T23:59:59.000Z

    I explore the effects of two simultaneous changes in minimum energy efficiency and ENERGY STAR standards for clothes washers. Adapting the Mussa and Rosen (1978) and Ronnen (1991) second-degree price discrimination model, I demonstrate that clothes washer prices and menus adjusted to the new standards in patterns consistent with a market in which firms had been price discriminating. In particular, I show evidence of discontinuous price drops at the time the standards were imposed, driven largely by mid-low efficiency segments of the market. The price discrimination model predicts this result. On the other hand, in a perfectly competition market, prices should increase for these market segments. Additionally, new models proliferated in the highest efficiency market segment following the standard changes. Finally, I show that firms appeared to use different adaptation strategies at the two instances of the standards changing.

  7. Control Systems Cyber Security Standards Support Activities

    SciTech Connect (OSTI)

    Robert Evans

    2009-01-01T23:59:59.000Z

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  8. DOE-TSPP-10, Conversion of DOE Technical Standards to Non-Government Standards- July 1, 2009

    Broader source: Energy.gov [DOE]

    This procedure provides guidance on the conversion of DOE Technical Standards to Voluntary Consensus Standards (VCSs), also referred to as non-Government standards.

  9. Calculations supporting evaluation of potential environmental standards for Yucca Mountain

    SciTech Connect (OSTI)

    Duguid, J.O.; Andrews, R.W.; Brandstetter, E.; Dale, T.F.; Reeves, M. [INTERA, Inc., Las Vegas, NV (United States)

    1994-04-01T23:59:59.000Z

    The Energy Policy Act of 1992, Section 801 (US Congress, 1992) provides for the US Environmental Protection Agency (EPA) to contract the National Academy of Sciences (NAS) to conduct a study and provide findings and recommendations on reasonable standards for the disposal of high-level wastes at the Yucca Mountain site. The NAS study is to provide findings and recommendations which include, among other things, whether a health-based standard based on dose to individual members of the public from releases to the accessible environment will provide a reasonable standard for the protection of the health and safety of the public. The EPA, based upon and consistent with the findings and recommendations of the NAS, is required to promulgate standards for protection of the public from releases from radioactive materials stored or disposed of in a repository at the Yucca Mountain site. This document presents a number of different ``simple`` analyses of undisturbed repository performance that are intended to provide input to those responsible for setting appropriate environmental standards for a potential repository at the Yucca Mountain site in Nevada. Each of the processes included in the analyses has been simplified to capture the primary significance of that process in containing or isolating the waste from the biosphere. In these simplified analyses, the complex waste package interactions were approximated by a simple waste package ``failure`` distribution which is defined by the initiation and rate of waste package ``failures``. Similarly, releases from the waste package and the engineered barrier system are controlled by the very near field environment and the presence and rate of advective and diffusive release processes. Release was approximated by either a simple alteration-controlled release for the high solubility radionuclides and either a diffusive or advective-controlled release for the solubility-limited radionuclides.

  10. ASHRAE's Residential Ventilation Standard: Exegesis of Proposed Standard 62.2

    E-Print Network [OSTI]

    Sherman, M.

    2000-01-01T23:59:59.000Z

    In February 2000, ASHRAE's Standard Project Committee on "Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings", SPC 62.2P7 recommended ASHRAE's first complete standard on residential ventilation for public review...

  11. Service Oriented Architecture for High Level Applications

    SciTech Connect (OSTI)

    Chu, Chungming; Chevtsov, Sergei; Wu, Juhao; /SLAC; Shen, Guobao; /Brookhaven

    2012-06-28T23:59:59.000Z

    Standalone high level applications often suffer from poor performance and reliability due to lengthy initialization, heavy computation and rapid graphical update. Service-oriented architecture (SOA) is trying to separate the initialization and computation from applications and to distribute such work to various service providers. Heavy computation such as beam tracking will be done periodically on a dedicated server and data will be available to client applications at all time. Industrial standard service architecture can help to improve the performance, reliability and maintainability of the service. Robustness will also be improved by reducing the complexity of individual client applications.

  12. Multi-objective fuel policies: Renewable fuel standards versus Fuel greenhouse gas intensity standards

    E-Print Network [OSTI]

    Rajagopal, Deepak

    2010-01-01T23:59:59.000Z

    carbon tax, mandate, intensity standard JEL classi?cations: Q42; Q48 Introduction Governments throughout the world

  13. Consortium to design human trials of mosaic HIV vaccine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to User Group andCompositionalInitial Validation andPWR MediaHuman trials

  14. MHK Projects/Ocean Trials Ver 2 | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home5b9fcbce19 No revision hasInformation Earth's Heat JumpIncMAKGalway Bay IE < MHK Projects Jump to: navigation,Trials Ver

  15. EMPLACEMENT GANTRY ITS STANDARDS IDENTIFICATION STUDY

    SciTech Connect (OSTI)

    M. Voegele

    2005-04-06T23:59:59.000Z

    To date, the project has established ITS performance requirements for SSCs based on identification and categorization of event sequences that may result in a radiological release. These performance requirements are defined within the NSDB. Further, SSCs credited with performing safe functions are classified as ITS. In turn, perform confirmation for these SSCs is sought through the use of consensus code and standards. The purpose of this study is to identify applicable codes and standards for the WP Emplacement Gantry ITS SSCs. Further, this study will form the basis for selection and the extent of applicability of each code and standard. This study is based on the design development completed for LA only. Accordingly, identification of ITS SSCs beyond those defined within the NSDB are based on designs that may be subject to further development during detail design. Furthermore, several design alternatives may still be under consideration to satisfy certain safety functions, and that final selection will not be determined until further design development has occurred. Therefore, for completeness, throughout this study alternative designs currently under considered will be discussed. Further, the results of this study will be subject to evaluation as part of a follow-on GAP analysis study. Based on the results of this study the GAP analysis will evaluate each code and standard to ensure each ITS performance requirement is fully satisfied. When a performance requirement is not fully satisfied a ''gap'' is highlighted. Thereafter, the study will identify supplemental requirements to augment the code or standard to meet performance requirements. Further, the GAP analysis will identify non-standard areas of the design that will be subject to a Development Plan. Non-standard components and non-standard design configurations are defined as areas of the design that do not follow standard industry practices or codes and standards. Whereby, performance confirmation cannot be readily sought though use of consensus standards. The ITS codes and standards identified in this document were developed by the Yucca Mountain Project personnel from the Emplacement & Retrieval Project and are intended solely for the use of the Design and Engineering group in its work regarding the Emplacement and Retrieval system, specifically identification of Emplacement and Retrieval equipment codes and standards.

  16. Vermont Air Pollution Control Regulations, Ambient Air Quality Standards (Vermont)

    Broader source: Energy.gov [DOE]

    The ambient air quality standards are based on the national ambient air quality standards. The Vermont standards are classified as primary and secondary standards and judged adequate to protect...

  17. Clean-up standards and pathways analysis methods

    SciTech Connect (OSTI)

    Devgun, J.S. [Argonne National Lab., IL (United States). Office of Waste Management Programs

    1993-12-31T23:59:59.000Z

    Remediation of a radioactively contaminated site requires that certain regulatory criteria be met before the site can be released for unrestricted future use. Since the ultimate objective of remediation is to protect the public health and safety, residual radioactivity levels remaining at a site after cleanup must be below certain preset limits or meet acceptable dose or risk criteria. This paper discusses cleanup standards for radioactively contaminated soils and describes the use of pathways analysis methods for deriving site-specific residual radioactivity guidelines. An example is provided in which a pathways analysis code (RESRAD) was used to establish such guidelines.

  18. Search for the Standard Model Higgs Boson at the LEP2 Collider near

    E-Print Network [OSTI]

    Boyer, Edmond

    Search for the Standard Model Higgs Boson at the LEP2 Collider near ps = 183 GeV The ALEPHV. These data are used to look for possible signals from the production of the Standard Model Higgs boson on the mass of the Higgs boson: mH > 87:9 GeV=c2 at 95% con#12;dence level. The ALEPH Collaboration wish

  19. It's worth the work: Proposed water quality standards move Texas closer to cleaner waters

    E-Print Network [OSTI]

    Wythe, Kathy

    2010-01-01T23:59:59.000Z

    are realizing that applying a single standard of primary contact recreation to hundreds of different surface water bodies may not be realistic or beneficial. While public interest is high in having an ambitious standard as possible, Jim Davenport, technical...- ation and non-contact recreation?to four, adding two more levels: secondary contact 1 and 2 (see definitions on page 19). The agency is also proposing different numerical criteria for E. coli that will be applicable in fresh water based...

  20. [ HIGH PERFORMANCE BUILDING STANDARD] STATE OF MONTANA HIGH PERFORMANCE BUILDING STANDARDS

    E-Print Network [OSTI]

    Dyer, Bill

    [ HIGH PERFORMANCE BUILDING STANDARD] PART 2 HPBS STATE OF MONTANA HIGH PERFORMANCE BUILDING. These High Performance Building Standards are promulgated to implement the directives established in SB 49 which amended Section 17-7-201, MCA. B. These High Performance Building Standards were adopted on June 1

  1. Progress and Effect of Energy-Saving Standards in China

    Office of Energy Efficiency and Renewable Energy (EERE)

    Information about the development of energy-saving standards in China, results of standards, and work highlights.

  2. ACADEMIC STANDARDS SUB-COMMITTEE Terms of Reference

    E-Print Network [OSTI]

    on the above. ASSC: Constitution i Chair PVC Quality & Standards ii Ex officio PVC Quality & Standards Head

  3. 1997 DOE technical standards program workshop: Proceedings

    SciTech Connect (OSTI)

    NONE

    1997-10-01T23:59:59.000Z

    The Department of Energy held its annual Technical Standards Program Workshop on July 8--10, 1997, at the Loews L`Enfant Plaza Hotel in Washington, DC. The workshop focused on aspects of implementation of the National Technology Transfer and Advancement Act of 1995 [Public Law (PL) 104-113] and the related revision (still pending) to OMB Circular A119 (OMB A119), Federal Participation in the Development and Use of Voluntary Standards. It also addressed DOE`s efforts in transitioning to a standards-based operating culture, and, through this transition, to change from a developer of internal technical standards to a customer of external technical standards. The workshop was designed to provide a forum to better understand how the new law is affecting Department activities. Panel topics such as ``Public Law 104-113 and Its Influence on Federal Agency Standards Activities`` and ``Update on Global Standards Issues`` provided insight on both the internal and external effects of the new law. Keynote speaker Richard Meier of Meadowbrook International (and formerly the Deputy Assistant US Trade Representative) addressed the subject of international trade balance statistics. He pointed out that increases in US export figures do not necessarily indicate increases in employment. Rather, increased employment results from product growth. Mr Meier also discussed issues such as the US migration to the sue of the metric system, the impact of budget limitations on Government participation in voluntary standards organizations, international standards ISO 9000 and ISO 14000, and DOE`s role in the worldwide transition from weapons production to cleanup.

  4. Evaluation of Breast Sentinel Lymph Node Coverage by Standard Radiation Therapy Fields

    SciTech Connect (OSTI)

    Rabinovitch, Rachel [Department of Radiation Oncology, University of Colorado Cancer Center, Aurora, CO (United States)], E-mail: Rachel.rabinovitch@uchsc.edu; Ballonoff, Ari; Newman, Francis M.S. [Department of Radiation Oncology, University of Colorado Cancer Center, Aurora, CO (United States); Finlayson, Christina [Department of GI, Tumor, and Endocrine Surgery, University of Colorado Cancer Center, Aurora, CO (United States)

    2008-04-01T23:59:59.000Z

    Background: Biopsy of the breast sentinel lymph node (SLN) is now a standard staging procedure for early-stage invasive breast cancer. The anatomic location of the breast SLN and its relationship to standard radiation fields has not been described. Methods and Materials: A retrospective review of radiotherapy treatment planning data sets was performed in patients with breast cancer who had undergone SLN biopsy, and those with a surgical clip at the SLN biopsy site were identified. The location of the clip was evaluated relative to vertebral body level on an anterior-posterior digitally reconstructed radiograph, treated whole-breast tangential radiation fields, and standard axillary fields in 106 data sets meeting these criteria. Results: The breast SLN varied in vertebral body level position, ranging from T2 to T7 but most commonly opposite T4. The SLN clip was located below the base of the clavicle in 90%, and hence would be excluded from standard axillary radiotherapy fields where the inferior border is placed at this level. The clip was within the irradiated whole-breast tangent fields in 78%, beneath the superior-posterior corner multileaf collimators in 12%, and outside the tangent field borders in 10%. Conclusions: Standard axillary fields do not encompass the lymph nodes at highest risk of containing tumor in breast cancer patients. Elimination of the superior-posterior corner MLCs from the tangent field design would result in inclusion of the breast SLN in 90% of patients treated with standard whole-breast irradiation.

  5. DEMONSTRATION OF THE DOE INTERIM ENERGY CONSERVATION STANDARDS FOR NEW FEDERAL RESIDENTIAL BUILDINGS: EXECUTIVE SUMMARY

    SciTech Connect (OSTI)

    Lee, A. D.; Baechler, M / C.; Di Massa, F. V.; Lucas, R. G.; Shankle, D. L.

    1992-01-01T23:59:59.000Z

    In accordance with federal legislation, the U.S. Department of Energy (DOE) bas conducted a project to demonstrate use of its Interim Energy Conservation Standards for New Federal Residential Buildings. The demonstration is the second step in a three-step process: development of interim standards, demonstration of the interim standards, and development of final standards. Pacific Northwest Laboratory (PNL) collected information from the demonstration project and prepared this report under a contract with DOE. The purpose of the standards is to improve the energy efficiency of federal housing and increase the use of nondepletable energy sources. In accordance with the legislation, the standards were to be performance-based rather than prescribing specific energy conservation measures. The standards use a computer software program called COSTSAFR which individualizes the standards based on climate, housing type, and fuel costs. The standards generate minimum energy-efficiency requirements by applying the life-cycle cost methodology developed for federal projects, For the demonstration, the DOE chose live federal agency housing projects: four military housing projects and one project for the Department of Health and Human Services. DOE and PNL worked with agency housing procurement officials and designers/architects to hypothetically apply the interim standards to each housing project. PNL conducted extensive interviews with the federal agencies and design contractors to determine what impacts the standards would have on the existing agency procurement process as well as on designers. Overall, PNL found that the interim standards met the basic intent of the law. Specific actions were identified, however, that DOE could take to improve the standards and encourage the agencies to implement them. Agency personnel and designers expressed similar concerns about the standards: the minimum efficiency levels established by the standards were lower than expected and the standards did not provide an easy way to incorporate new energy-efficient and renewable resource tec.:hnolog:ies like solar heating systems. Agency personnel said the standards would fit into current procurement procedures with no big changes or cost increases, Many said the standards would decrease the time and effort they now spend to establish energy-efficiency requirements and to confirm that proposed designs comply with those requirements. Agency personnel praised the software and documentation for being easy to use and providing energy-efficiency requirements in energy dollars. Housing designers agreed that the DOE standards were easy to use to determine that their designs meet energy-efficiency goals. Many felt the information provided by the standards could be useful in the design process. Based on the demonstration, PNL recommends establishing task forces that will actively involve agency personnel and others in future revisions and development of the final standards. PNL also recommends that DOE and federal agencies investigate the use of market fuel and energy prices in the standards, rather than the prices paid by the agencies, to better reflect actual costs. A number of recommendations are made for improving communications between DOE and the users of the standards and for enhancing tools to implement the standards. Several recommendations are made for increasing the number of renewable resources that are included in the standards. Finally, PNL recommends ongoing monitoring activities to continue to identify ways in which the standards can be improved.

  6. Standard Model and Gravity from Spinors

    E-Print Network [OSTI]

    F. Nesti

    2008-06-20T23:59:59.000Z

    We propose to unify the Gravity and Standard Model gauge groups by using algebraic spinors of the standard four-dimensional Clifford algebra, in left-right symmetric fashion. This generates exactly a Standard Model family of fermions, and a Pati-Salam unification group emerges, at the Planck scale, where (chiral) self-dual gravity decouples. As a remnant of the unification, isospin-triplets spin-two particles may naturally appear at the weak scale, providing a striking signal at the LHC.

  7. CAFE Standards (released in AEO2010)

    Reports and Publications (EIA)

    2010-01-01T23:59:59.000Z

    Pursuant to the Presidents announcement of a National Fuel Efficiency Policy, the National Highway Traffic Safety Administration (NHTSA) and the EPA have promulgated nationally coordinated standards for tailpipe Carbon Dioxide (CO2)-equivalent emissions and fuel economy for light-duty vehicles (LDVs), which includes both passenger cars and light-duty trucks. In the joint rulemaking, the Environmental Protection Agency is enacting CO2-equivalent emissions standards under the Clean Air Act (CAA), and NHTSA is enacting companion Corporate Average Fuel Economy standards under the Energy Policy and Conservation Act, as amended by the Energy Independence and Security Act of 2007.

  8. E-Print Network 3.0 - antihypertensive trial failures Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    : furtheranalyses from the Antihypertensive and Lipid-Lowering treatment to prevent Heart Attack Trial. Ann Intern... Journal of Cardiac Failure Vol. 10 No. 5 2004...

  9. E-Print Network 3.0 - advance-d trial results Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Fleischhacker, Yao Zhao Summary: in response to early trial results. While initial demand forecasts can be very wrong, the factors influencing... Balancing Learning and...

  10. E-Print Network 3.0 - art interruptions trial Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Medicine 17 Locked-out: Investigating the Effectiveness of System Lockouts Summary: +lockout trial. 12;If a participant resumed the task in the wrong place after an interruption...

  11. E-Print Network 3.0 - abuse clinical trials Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    questions that go beyond the scope and mission of the clinical trials conducted... by the pharmaceutical industry in the private sector. These clinical ... Source: Ungerleider,...

  12. Defense Attorneys' Perceptions of Competency to Stand Trial Evaluations in Oklahoma: A Second Look.

    E-Print Network [OSTI]

    Graham, Angila

    2007-01-01T23:59:59.000Z

    ??The purpose of this study was to examine Oklahoma defense attorneys' perceptions of competency to stand trial evaluations. Participants in this study were 47 attorneys… (more)

  13. E-Print Network 3.0 - adolescent scoliosis trial Sample Search...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Brain and Development Laboratory Collection: Biology and Medicine 24 Online usage of theory of mind continues to develop in late adolescence Summary: No-Director), Trial type...

  14. E-Print Network 3.0 - adherence trial weltel Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    calcium intake clinical trial; validating tools for diagnoses... ) November 9--Effect of Cell Phone SMS on Antiretroviral ... Source: Handy, Todd C. - Department of Psychology,...

  15. E-Print Network 3.0 - assessor-blinded multicenter trial Sample...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (Located on the IRB website) REQUIRED for studies involving... been provided Copy of NIH Progress Report (For NIH Sponsored Trials) IMPORTANT: If a copy... of Data Safety...

  16. E-Print Network 3.0 - asme n511-19xx standard Sample Search Results

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    results for: asme n511-19xx standard Page: << < 1 2 3 4 5 > >> 1 Abstract State Machines and High-Level System Design and Analysis Summary: and the themes of this...

  17. INFLUENCE OF D.I.C HYDROTHERMAL PROCESS CONDITIONS ON THE GELATINIZATION PROPERTIES OF STANDARD MAIZE STARCH

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    INFLUENCE OF D.I.C HYDROTHERMAL PROCESS CONDITIONS ON THE GELATINIZATION PROPERTIES OF STANDARD ABSTRACT Standard maize starch was hydrothermally treated at residual moisture content (~12 %) by Instantaneous Controlled Pressure Drop for various pressure levels and processing times. In order to examine

  18. Grants, Clinical Trials and Contracts Table of Contents

    E-Print Network [OSTI]

    on Documentation Required by the Standard LSUHSC Professional Services Contract and A Sample of Documentation Language Required by the Latest Revised Interim LSU Public Hospital Professional Services Contract(s). III

  19. Comparisons of ANSI standards cited in the NRC standard review plan, NUREG-0800 and related documents

    SciTech Connect (OSTI)

    Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B. [Pacific Northwest Lab., Richland, WA (United States)

    1995-11-01T23:59:59.000Z

    This report provides the results of comparisons of the cited and latest versions of ANSI standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC`s Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review.

  20. Comparisons of ASTM standards cited in the NRC standard review plan, NUREG-0800 and related documents

    SciTech Connect (OSTI)

    Ankrum, A.R.; Bohlander, K.L.; Gilbert, E.R.; Pawlowski, R.A.; Spiesman, J.B.

    1995-10-01T23:59:59.000Z

    This report provides the results of comparisons of the cited and latest versions of ASTM standards cited in the NRC Standard Review Plan for the Review of Safety Analysis Reports for Nuclear Power Plants (NUREG 0800) and related documents. The comparisons were performed by Battelle Pacific Northwest Laboratories in support of the NRC`s Standard Review Plan Update and Development Program. Significant changes to the standards, from the cited version to the latest version, are described and discussed in a tabular format for each standard. Recommendations for updating each citation in the Standard Review Plan are presented. Technical considerations and suggested changes are included for related regulatory documents (i.e., Regulatory Guides and the Code of Federal Regulations) citing the standard. The results and recommendations presented in this document have not been subjected to NRC staff review.

  1. Geothermal Power Plants — Meeting Clean Air Standards

    Broader source: Energy.gov [DOE]

    Geothermal power plants can meet the most stringent clean air standards. They emit little carbon dioxide, very low amounts of sulfur dioxide, and no nitrogen oxides. See Charts 1, 2, and 3 below.

  2. Hazardous Waste Management Standards and Regulations (Kansas)

    Broader source: Energy.gov [DOE]

    This act states the standards and regulations for the management of hazardous waste. No person shall construct, modify or operate a hazardous waste facility or otherwise dispose of hazardous waste...

  3. Tissue sampling and standards for vertebrate genomics

    E-Print Network [OSTI]

    2012-01-01T23:59:59.000Z

    and standards for vertebrate genomics. GigaScience 2012 1:8.transition to conservation genomics. TIG 2010, 26:177–187.Siemens DH: Ecological genomics––changing perspectives on

  4. Setting the Standard for Industrial Energy Efficiency

    E-Print Network [OSTI]

    McKane, Aimee; Williams, Robert; Perry, Wayne; Li, Tienan

    2008-01-01T23:59:59.000Z

    Voluntary Agreements for Energy Efficiency or GHG EmissionsACEEE Summer Study on Energy Efficiency in Industry, WestStandard for Industrial Energy Efficiency A. McKane 1 , R.

  5. RENEWABLES PORTFOLIO STANDARD 2005 PROCUREMENT VERIFICATION

    E-Print Network [OSTI]

    CALIFORNIA ENERGY COMMISSION RENEWABLES PORTFOLIO STANDARD 2005 PROCUREMENT VERIFICATION RENEWABLES COMMITTEE John L. Geesman Presiding Member Jackalyne Pfannenstiel Associate Member B.B. Blevins Executive Director Jason Orta Heather Raitt Principal Authors Mark Hutchison Manager RENEWABLE ENERGY OFFICE

  6. Energy Goals and Standards for Federal Government

    Broader source: Energy.gov [DOE]

    The federal Energy Policy Act of 2005 (EPAct 2005) established several goals and standards to reduce energy use in existing and new federal buildings. Executive Order 13423, signed in January 2007...

  7. Solar Design Standards for State Buildings

    Broader source: Energy.gov [DOE]

    Arizona law requires that new state building projects over six thousand square feet follow prescribed solar design standards. Solar improvements should be evaluated on the basis of life cycle costs...

  8. Energy Efficiency Standards for State Buildings

    Broader source: Energy.gov [DOE]

    In April 2009, the legislature passed [http://data.opi.mt.gov/bills/2009/billhtml/SB0049.htm S.B. 49], creating energy efficiency standards for state-owned and state-leased buildings. Energy...

  9. Luminous Efficacy Standards for General Purpose Lights

    Broader source: Energy.gov [DOE]

    Assembly Bill 178, adopted in June 2007, established efficacy* standards for general purpose lights sold in the state of Nevada. The bill set the required efficacy at 25 lumens per watt (lm/W) of...

  10. N. Mariana Islands- Renewables Portfolio Standard

    Broader source: Energy.gov [DOE]

    The Commonwealth of the Northern Mariana Islands enacted its Renewables Portfolio Standard in September 2007, in which a certain percentage of its net electricity sales must come from renewable...

  11. Renewable Energy Standard (Nova Scotia, Canada)

    Broader source: Energy.gov [DOE]

    On February 1, 2007, Nova Scotia's new Renewable Energy Standards took effect. By 2013, Nova Scotia will generate at least 18.5% of the Province's electricity through renewable energy -- wind,...

  12. Energy Disclosure and Leasing Standards: Best Practices

    Broader source: Energy.gov (indexed) [DOE]

    joining the meeting To limit background noise, please put your phone or audio on mute. Energy Disclosure and Leasing Standards 2 | TAP Webinar eere.energy.gov The Parker Ranch...

  13. Moving Forward With Fuel Economy Standards

    E-Print Network [OSTI]

    Schipper, Lee

    2009-01-01T23:59:59.000Z

    Council. Automotive Fuel Economy: How Far Can We Go? (Lee Schipper. Automobile Fuel. Economy and CO 2 Emissions inGraham. The Effect of Fuel Economy Standards on Automobile

  14. Renewable Energy and Energy Efficiency Portfolio Standard

    Broader source: Energy.gov [DOE]

    North Carolina's Renewable Energy and Energy Efficiency Portfolio Standard (REPS), established by [http://www.ncleg.net/Sessions/2007/Bills/Senate/PDF/S3v6.pdf Senate Bill 3] in August 2007,...

  15. Standard Test Method for Sandwich Corrosion Test

    E-Print Network [OSTI]

    American Society for Testing and Materials. Philadelphia

    2009-01-01T23:59:59.000Z

    1.1 This test method defines the procedure for evaluating the corrosivity of aircraft maintenance chemicals, when present between faying surfaces (sandwich) of aluminum alloys commonly used for aircraft structures. This test method is intended to be used in the qualification and approval of compounds employed in aircraft maintenance operations. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Specific hazard statements appear in Section 9.

  16. Alternative and Renewable Energy Portfolio Standard

    Broader source: Energy.gov [DOE]

    In June 2009, West Virginia enacted an ''Alternative and Renewable Energy Portfolio Standard'' that requires investor-owned utilities (IOUs)* with more than 30,000 residential customers to supply...

  17. Puerto Rico- Renewable Energy Portfolio Standard

    Broader source: Energy.gov [DOE]

    Note: Compliance for this standard does not begin until 2015. Additional rules and regulations are needed to implement this law; this record will be updated periodically as the rules are developed.

  18. UNITED STATES JAPAN ON STANDARDS FOR EMERGING

    E-Print Network [OSTI]

    Venue: Bldg. 101/Portrait Gallery Room Chair: M. Navarro (IAAO, NIST) - Dr. Patrick Gallagher, NIST Standardization] (10 minutes each) Chair: M. Navarro (IAAO, NIST) S1-1 Thickness - Yasushi Azuma, Research

  19. 1995 building energy codes and standards workshops: Summary and documentation

    SciTech Connect (OSTI)

    Sandahl, L.J.; Shankle, D.L.

    1996-02-01T23:59:59.000Z

    During the spring of 1995, Pacific Northwest National Laboratory (PNNL) conducted four two-day Regional Building Energy Codes and Standards workshops across the US. Workshops were held in Chicago, Denver, Rhode Island, and Atlanta. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing building energy codes in their states. The workshops provided an opportunity for state and other officials to learn more about residential and commercial building energy codes and standards, the role of the US Department of Energy and the Building Standards and Guidelines Program at Pacific Northwest National Laboratory, Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. Participants heard success stories, got tips on enforcement training, and received technical support materials. In addition to receiving information on the above topics, workshop participants had an opportunity to provide input on code adoption issues, building industry training issues, building design issues, and exemplary programs across the US. This paper documents the workshop planning, findings, and follow-up processes.

  20. A Five-Level Three-Phase Hybrid Cascade Multilevel Inverter Using a Single DC Source

    E-Print Network [OSTI]

    Tolbert, Leon M.

    A Five-Level Three-Phase Hybrid Cascade Multilevel Inverter Using a Single DC Source for a PM to construct a 3-phase 5-level cascade multilevel inverter to be used as a drive for a PM traction motor. The 5-level inverter consists of a standard 3-leg inverter (one leg for each phase) and an H-bridge in series

  1. Design Life Level: Quantifying risk in a changing climate Holger Rootzen1

    E-Print Network [OSTI]

    Katz, Richard

    Design Life Level: Quantifying risk in a changing climate Holger Rootzen1 and Richard W. Katz2 of return levels and return periods have been standard and important tools for engineering design. However, whether local or global. In this paper, we propose a refined concept, Design Life Level, which quantifies

  2. State Appliance Standards (released in AEO2009)

    Reports and Publications (EIA)

    2009-01-01T23:59:59.000Z

    State appliance standards have existed for decades, starting with Californias enforcement of minimum efficiency requirements for refrigerators and several other products in 1979. In 1987, recognizing that different efficiency standards for the same products in different states could create problems for manufacturers, Congress enacted the National Appliance Energy Conservation Act (NAECA), which initially covered 12 products. The Energy Policy Act of 1992 (EPACT92), EPACT2005, and EISA2007 added additional residential and commercial products to the 12 products originally specified under NAECA.

  3. Early Standard Model measurements with ATLAS

    E-Print Network [OSTI]

    T. Ince; for the ATLAS collaboration

    2009-05-28T23:59:59.000Z

    The measurement of Standard Model processes will be an important first step towards exploiting the discovery potential of the Large Hadron Collider, the highest energy accelerator ever built that will begin operation in the fall 2009. This paper presents a summary of the early physics analyses for understanding the performance of the detector as well as the Standard Model at the ATLAS experiment at 14 TeV centre of mass energy.

  4. Effect of noise on the standard mapping

    SciTech Connect (OSTI)

    Karney, C.F.F.; Rechester, A.B.; White, R.B.

    1981-03-01T23:59:59.000Z

    The effect of a small amount of noise on the standard mapping is considered. Whenever the standard mapping possesses accelerator models (where the action increases approximately linearly with time), the diffusion coefficient contains a term proportional to the reciprocal of the variance of the noise term. At large values of the stochasticity parameter, the accelerator modes exhibit a universal behavior. As a result the dependence of the diffusion coefficient on stochasticity parameter also shows some universal behavior.

  5. The Born Oppenheimer wave function near level crossing

    E-Print Network [OSTI]

    The Born Oppenheimer wave function near level crossing J. E. Avron and A. Gordon Department of Physics, Technion, 32000 Haifa, Israel June 19, 2000 Abstract The standard Born Oppenheimer theory does mass ratio. 1 Introduction In 1927, in a landmark paper, Born and Oppenheimer [2] paved the way

  6. CaseComprehensiveCancerCenter Standard Operation Procedures for Clinical Research

    E-Print Network [OSTI]

    Rollins, Andrew M.

    [Quality Assurance] (QA) a. QA-8.1.0 Monitoring Investigator-Initiated Clinical Trials 9. Regulatory Comprehensive Cancer Center. The Cancer Center implements and enforces all SOPs across consortium institutions Core Facility CTRP Clinical Trials Reporting Program CTU Clinical Trials Unit CTWG Clinical Trials

  7. Understanding Building Energy Codes and Standards

    SciTech Connect (OSTI)

    Bartlett, Rosemarie; Halverson, Mark A.; Shankle, Diana L.

    2003-03-01T23:59:59.000Z

    Energy codes and standards play a vital role by setting minimum requirements for energy-efficient design and construction. They outline uniform requirements for new buildings as well as additions and renovations. The Difference Between Energy Codes, Energy Standards and the Model Energy Code Energy codes--specify how buildings must be constructed or perform, and are written in mandatory, enforceable language. States or local governments adopt and enforce energy codes for their jurisdictions. Energy standards--describe how buildings should be constructed to save energy cost-effectively. They are published by national organizations such as the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE). They are not mandatory, but serve as national recommendations, with some variation for regional climate. States and local governments frequently use energy standards as the technical basis for developing their energy codes. Some energy standards are written in mandatory, enforceable language, making it easy for jurisdictions to incorporate the provisions of the energy standards directly into their laws or regulations.

  8. Radiological standards and calibration laboratory capabilities

    SciTech Connect (OSTI)

    Goles, R.W.

    1995-01-01T23:59:59.000Z

    The Radiological Standards and Calibrations Laboratory, a part of Pacific Northwest Laboratory (PNL), performs calibrations and upholds reference standards necessary to maintain traceability to national radiological standards. The facility supports U.S. Department of Energy (DOE) programs at the Hanford Site, programs sponsored by DOE Headquarters and other federal agencies, radiological protection programs at other DOE sites, and research programs sponsored through the commercial sector. The laboratory is located in the 318 Building of the Hanford Site`s 300 Area. The facility contains five major exposure rooms and several laboratories used for exposure work preparation, low-activity instrument calibrations, instrument performance evaluations, instrument maintenance, instrument design and fabrication work, and thermoluminescent and radiochromic dosimetry. The major exposure facilities are a low-scatter room used for neutron and photon exposures, a source well room used for high-volume instrument calibration work, an x-ray facility used for energy response studies, a high-exposure facility used for high-rate photon calibration work, and a beta standards laboratory used for beta energy response studies and beta reference calibrations. Calibrations are routinely performed for personnel dosimeters, health physics instrumentations, photon transfer standards and alpha, beta and gamma field sources used throughout the Hanford Site. This report describes the standards and calibrations laboratory. Photographs that accompany the text appear in the Appendix and are designated Figure A.1 through A.29.

  9. The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

    SciTech Connect (OSTI)

    Spickett, Jeffery, E-mail: J.Spickett@curtin.edu.au [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia) [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia); Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia (Australia); Katscherian, Dianne [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia) [WHO Collaborating Centre for Environmental Health Impact Assessment (Australia); Faculty of Health Sciences, School of Public Health, Curtin University, Perth, Western Australia (Australia); Harris, Patrick [CHETRE — UNSW Research Centre for Primary Health Care and Equity, University of New South Wales (Australia)] [CHETRE — UNSW Research Centre for Primary Health Care and Equity, University of New South Wales (Australia)

    2013-11-15T23:59:59.000Z

    The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia. To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards. Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia. The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality. In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous. -- Highlights: • Health Impact Assessment framework has been applied to a policy development process. • HIA process was evaluated for application in air quality standard setting. • Advantages of HIA in the air quality standard setting process are demonstrated.

  10. A Comparison of Cross-Sector Cyber Security Standards

    SciTech Connect (OSTI)

    Robert P. Evans

    2005-09-01T23:59:59.000Z

    This report presents a review and comparison (commonality and differences) of three cross-sector cyber security standards and an internationally recognized information technology standard. The comparison identifies the security areas covered by each standard and reveals where the standards differ in emphasis. By identifying differences in the standards, the user can evaluate which standard best meets their needs. For this report, only cross-sector standards were reviewed.

  11. DEMONSTRATION OF THE DOE INTERIM ENERGY CONSERVATION STANDARDS FOR NEW FEDERAL RESIDENTIAL BUILDINGS

    SciTech Connect (OSTI)

    Lee, A. D.; Baechler, H. C.; Di Massa, F. V.; Lucas, R. G.; Shankle, D. L.

    1992-01-01T23:59:59.000Z

    In accordance with federal legislation, the U.S. Department of Energy (DOE) has sponsored a study to demonstrate use of its Interim Energy Conservation Standards for New Federal Residential Buildings. The demonstration study was conducted by DOE and the Pacific Northwest Laboratory (PNL). The demonstration is the second step in a three-step process: I) development of interim standards, 2) demonstration of the interim standards, and 3) development of final standards. The standards are mandatory for federal agency housing procurements. Nevertheless, PNL found at the start of the demonstration that agency use of the interim standards had been minimal. The purpose of the standards is to improve the energy efficiency of federal housing and increase the use of nondepletable energy sources. In accordance with the legislation, the standards were to be performance-based rather than prescribing specific energy conservation measures. To fulfill this aspect of the legislation, the standards use a computer software program called COSTSAFR which generates a point system that individualizes the standards to specific projects based on climate, housing type, and fuel costs. The standards generate minimum energy-efficiency requirements by applying the life-cycle cost methodology developed for federal projects. For the demonstration, PNL and DOE chose five federal agency housing projects which had been built in diverse geographic and climate regions. Participating agencies were the Air Force, the Army (which provided two case studies), the Navy, and the Department of Health and Human Services. PNL worked with agency housing procurement officials and designers/architects to hypothetically apply the interim standards to the procurement and design of each housing project. The demonstration started at the point in the project where agencies would establish their energyefficiency requirements for the project and followed the procurement process through the designers' use of the point system to develop a design which would comply with the standards. PNL conducted extensive interviews with the federal agencies and design contractors to determine what impacts the standards would have on the existing agency procurement process as well as on designers. Overall, PNL found that the interim standards met the basic intent of the law. Specific actions were identified, however, that DOE could take to improve the standards and encourage the agencies to implement them. Agency personnel found the minimum efficiency levels established by the standards to be lower than expected, and lower than their existing requirements. Generally, this was because the standards factor in fuel costs, as well as energy savings due to various conservation measures such as insulation, when they determine the minimum efficiency levels required. The demonstration showed that federal agencies often pay low prices for heating fuel and electricity; these lower costs "tipped the scales," allowing designers to meet the efficiency target with designs that were relatively inefficient. It appeared, however, that the low prices paid by agencies directly to suppliers did not capture the agencies' full costs of providing energy, such as the costs of distribution and storage. Agency personnel expressed some concern about the standards' ability to incorporate new energy-efficient technologies and renewable resource technologies like solar heating systems. An alternative compliance procedure was developed to incorporate new technologies; however, demonstration participants said the procedure was not well documented and was difficult and time consuming to use. Despite these concerns, most agency personnel thought that the standards would fit into current procurement procedures with no big changes or cost increases. Many said use of the standards would decrease the time and effort they now spend to establish energy-efficiency requirements and to confirm that proposed designs comply. Personnel praised the software and documentation for being easy to use and providing energ

  12. MFV Kerrie Marie BM172 (New Net MK 2) sea trials no11: ICES area VIIe

    E-Print Network [OSTI]

    MFV Kerrie Marie BM172 (New Net MK 2) sea trials no11: ICES area VIIe the results John, the Skipper fishing line and replaced it with a traditional 36mm rope fishing line in the new net" (see sea trials No4). "The new net didn't dig into the fishing grounds as much and discards were reduced much more

  13. Documenting the Financial Impact of a New Cancer Clinical Trials Network and the

    E-Print Network [OSTI]

    Mohaghegh, Shahab

    Documenting the Financial Impact of a New Cancer Clinical Trials Network and the Out and Economic Research. Documenting the Financial Impact of a New Cancer Clinical Trials Network and the Out.D. Department of Health Policy and Management University of Kansas Medical Center tgurley

  14. PHYSICAL PARAMETERS OF STANDARD AND BLOWOUT JETS

    SciTech Connect (OSTI)

    Pucci, Stefano; Romoli, Marco [Department of Physics and Astronomy, University of Firenze, I-50121 Firenze (Italy); Poletto, Giannina [INAF-Arcetri Astrophysical Observatory, I-50125 Firenze (Italy); Sterling, Alphonse C., E-mail: stpucci@arcetri.astro.it [Space Science Office, NASA/MSFC, Huntsville, Al 35812 (United States)

    2013-10-10T23:59:59.000Z

    The X-ray Telescope on board the Hinode mission revealed the occurrence, in polar coronal holes, of much more numerous jets than previously indicated by the Yohkoh/Soft X-ray Telescope. These plasma ejections can be of two types, depending on whether they fit the standard reconnection scenario for coronal jets or if they include a blowout-like eruption. In this work, we analyze two jets, one standard and one blowout, that have been observed by the Hinode and STEREO experiments. We aim to infer differences in the physical parameters that correspond to the different morphologies of the events. To this end, we adopt spectroscopic techniques and determine the profiles of the plasma temperature, density, and outflow speed versus time and position along the jets. The blowout jet has a higher outflow speed, a marginally higher temperature, and is rooted in a stronger magnetic field region than the standard event. Our data provide evidence for recursively occurring reconnection episodes within both the standard and the blowout jet, pointing either to bursty reconnection or to reconnection occurring at different locations over the jet lifetimes. We make a crude estimate of the energy budget of the two jets and show how energy is partitioned among different forms. Also, we show that the magnetic energy that feeds the blowout jet is a factor of 10 higher than the magnetic energy that fuels the standard event.

  15. An object-oriented implementation of a Low Level Reader Protocol (LLRP) library

    E-Print Network [OSTI]

    Constantinou, Fivos

    2007-01-01T23:59:59.000Z

    This Master of Engineering Thesis describes the design and implementation of an object-oriented Low Level Reader Protocol (LLRP) library. LLRP is a recently released protocol which standardizes the formats and methods of ...

  16. Comparison of x ray computed tomography number to proton relative linear stopping power conversion functions using a standard phantom

    SciTech Connect (OSTI)

    Moyers, M. F., E-mail: MFMoyers@roadrunner.com [Shanghai Proton and Heavy Ion Center, Shanghai, China 201321 (China)

    2014-06-15T23:59:59.000Z

    Purpose: Adequate evaluation of the results from multi-institutional trials involving light ion beam treatments requires consideration of the planning margins applied to both targets and organs at risk. A major uncertainty that affects the size of these margins is the conversion of x ray computed tomography numbers (XCTNs) to relative linear stopping powers (RLSPs). Various facilities engaged in multi-institutional clinical trials involving proton beams have been applying significantly different margins in their patient planning. This study was performed to determine the variance in the conversion functions used at proton facilities in the U.S.A. wishing to participate in National Cancer Institute sponsored clinical trials. Methods: A simplified method of determining the conversion function was developed using a standard phantom containing only water and aluminum. The new method was based on the premise that all scanners have their XCTNs for air and water calibrated daily to constant values but that the XCTNs for high density/high atomic number materials are variable with different scanning conditions. The standard phantom was taken to 10 different proton facilities and scanned with the local protocols resulting in 14 derived conversion functions which were compared to the conversion functions used at the local facilities. Results: For tissues within ±300 XCTN of water, all facility functions produced converted RLSP values within ±6% of the values produced by the standard function and within 8% of the values from any other facility's function. For XCTNs corresponding to lung tissue, converted RLSP values differed by as great as ±8% from the standard and up to 16% from the values of other facilities. For XCTNs corresponding to low-density immobilization foam, the maximum to minimum values differed by as much as 40%. Conclusions: The new method greatly simplifies determination of the conversion function, reduces ambiguity, and in the future could promote standardization between facilities. Although it was not possible from these experiments to determine which conversion function is most appropriate, the variation between facilities suggests that the margins used in some facilities to account for the uncertainty in converting XCTNs to RLSPs may be too small.

  17. STANDARD SETTING, PATENTS, AND HOLD-UP JOSEPH FARRELL

    E-Print Network [OSTI]

    Sadoulet, Elisabeth

    STANDARD SETTING, PATENTS, AND HOLD-UP JOSEPH FARRELL JOHN HAYES CARL SHAPIRO THERESA SULLIVAN* I. STANDARD SETTING, PATENTS, AND HOLD-UP: A TROUBLESOME MIX Standard setting raises a variety of antitrust strategy in standard setting, and Shapiro ad- dresses the boundary between cooperative standard setting

  18. Viable Alternative to the Standard Model

    E-Print Network [OSTI]

    Paul H. Frampton; Thomas W. Kephart

    2014-08-27T23:59:59.000Z

    As an alternative to the standard model, we couple two scalar doublets such that, in the third family, one (${\\cal H}$) couples only to the top quark, the other ($H$), that is identified as the 126 GeV state already observed, to the bottom quark and the tau lepton. Three explicit predictions of the model are that the partial decay rate $\\Gamma(H \\rightarrow \\gamma \\gamma)$ is 28.1\\% higher than predicted by the standard model, and the two partial decay widths $\\Gamma(H \\rightarrow \\bar{b}b)$ and $\\Gamma(H \\rightarrow \\bar{\\tau}\\tau)$ are both predicted to be greater than, or equal to, their standard model values.

  19. Safety, codes and standards for hydrogen installations :

    SciTech Connect (OSTI)

    Harris, Aaron P.; Dedrick, Daniel E.; LaFleur, Angela Christine; San Marchi, Christopher W.

    2014-04-01T23:59:59.000Z

    Automakers and fuel providers have made public commitments to commercialize light duty fuel cell electric vehicles and fueling infrastructure in select US regions beginning in 2014. The development, implementation, and advancement of meaningful codes and standards is critical to enable the effective deployment of clean and efficient fuel cell and hydrogen solutions in the energy technology marketplace. Metrics pertaining to the development and implementation of safety knowledge, codes, and standards are important to communicate progress and inform future R&D investments. This document describes the development and benchmarking of metrics specific to the development of hydrogen specific codes relevant for hydrogen refueling stations. These metrics will be most useful as the hydrogen fuel market transitions from pre-commercial to early-commercial phases. The target regions in California will serve as benchmarking case studies to quantify the success of past investments in research and development supporting safety codes and standards R&D.

  20. A Double-Blind, Placebo-Controlled Trial of Oral Human Immunoglobulin for Gastrointestinal Dysfunction in Children with Autistic Disorder

    E-Print Network [OSTI]

    2009-01-01T23:59:59.000Z

    y ORIGINAL PAPER A Double-Blind, Placebo-Controlled Trial ofautism. A randomized, double-blind, pla- cebo-controlled,results, a double- blind, placebo-controlled trial was