Powered by Deep Web Technologies
Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

ORISE: Nurse Triage Lines Support | How ORISE is Making a Difference  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

of nurse triage lines as a promising method for reducing disparities in access to quality health care during an influenza pandemic. Nurse triage lines are used daily in the United...

2

ORISE: Nurse Triage Lines Support | How ORISE is Making a Difference  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratory |CHEMPACK MappingHistory The OakMentorExercises and PlanningNurse

3

GLIDES PROJECT GuideLines Into DEcision Support  

E-Print Network [OSTI]

GLIDES PROJECT GuideLines Into DEcision Support sponsored by The Agency for Healthcare Research;Topics · GLIDES 4-level "stack" ­ NarraAve guideline with quality, implementabilityLon, and local coding/linking ­ To Formal Quality Measure via QDM, eMeasure · BRIDGE

Lee, Daeyeol

4

Radiological Triage | National Nuclear Security Administration  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas ConchasPassive Solar HomePromising Science for1 20115,PerformanceUsingFIB/SEMTEM (ARM)Triage

5

The Reliability of Triage Classification as a Predictor of Severity in Major Trauma  

E-Print Network [OSTI]

egional A bstracts The Reliability of Triage Classificationbe undertaken to validate its reliability and consideration

Moreno-Walton, Lisa; Torres, Hector; Radeos, Michael

2007-01-01T23:59:59.000Z

6

Triage: Balancing Energy and Quality of Service in a Microserver  

E-Print Network [OSTI]

Triage: Balancing Energy and Quality of Service in a Microserver Nilanjan Banerjee Jacob Sorber and that copies bear this notice and the full citation on the first page. To copy otherwise, to republish, to post

Ganesan, Deepak

7

TLSync: Support for Multiple Fast Barriers Using On-Chip Transmission Lines  

E-Print Network [OSTI]

TLSync: Support for Multiple Fast Barriers Using On-Chip Transmission Lines Jungju Oh jungju in a transmission-line broadcast network, thus leaving the transmission line network free for non-modulated (base--Interconnection architectures General Terms Design, Performance Keywords Multi-core, Synchronization, Barrier, Transmission Line

Prvulovic, Milos

8

Providing Support for Adaptive Scripting in an On-Line Collaborative Learning Environment  

E-Print Network [OSTI]

, Adaptive Support, Computer Mediated Communication. ACM Classification Keywords Education, E-Learning. INTRODUCTION Typical on-line education programs with full faculty support and other benefits are not always significantly cheaper than on-campus post-secondary learning [17]. In contrast, free on-line programs

Rose, Carolyn Penstein

9

System software for on-line display support  

E-Print Network [OSTI]

SVSTF!1 SO!'k'kiA!!E FOR ON-LINI! l?SP!, AY SU!'PORT A Thesis hy Walter Wi. lson Curry, Jz. Submitted to the Graduate College of the Texas Agkd Uni versity in Partial fulfillment of the reckuiremen(s for the d gree cf MASTER Ol' SCIENCE May... 1968 Maj or. Sub;cot: COMPUTER SCIENCE SYc T-:M SO1, TplgRP POR ON-LINE DIS?LAY S11PPOBT A I'hesrs by 1'1alter Wiison Our~y, Jr. lpproved as 'to style and oon tet t by ~ (Head of Departmen+) W3 I . de mb (iy mba r, ' May LD68 I wish t. o...

Curry, Walter Wilson, Jr

1968-01-01T23:59:59.000Z

10

Factors Associated With False-Positive Emergency Medical Services Triage for Percutaneous Coronary Intervention  

E-Print Network [OSTI]

to hospitals with percutaneous coronary intervention in theprimary percutaneous coronary intervention center to that ofTriage for Percutaneous Coronary Intervention Pamela

Yamamoto Swan, Pamela; Nighswonger, Beverly; Boswell, Gregory L; Stratton, Samuel J.

2009-01-01T23:59:59.000Z

11

E-Print Network 3.0 - automated triage system Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

prioritizing a stream of low-level device health Summary: for improving the alarm triage process. However, as with all automation, machine-learning-based systems... can be...

12

Hospital Triage in First Hours After Nuclear or Radiological Disaster  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-SeriesFlickr FlickrGuidedCH2MLLC HistoryVeterans | Updates andHospital Triage in

13

POTENTIAL ENHANCEMENTS TO NATURAL ATTENUATION: LINES OF INQUIRY SUPPORTING ENHANCED PASSIVE REMEDIATION OF CHLORINATED SOLVENTS  

SciTech Connect (OSTI)

The Department of Energy (DOE) is sponsoring an initiative to facilitate efficient, effective and responsible use of Monitored Natural Attenuation (MNA) and Enhanced Passive Remediation (EPR) for chlorinated solvents. This Office of Environmental Management (EM) ''Alternative Project,'' focuses on providing scientific and policy support for MNA/EPR. A broadly representative working group of scientists supports the project along with partnerships with regulatory organizations such as the Interstate Technology and Regulatory Council and the U.S. Environmental Protection Agency (EPA). The initial product of the technical working group was a summary report that articulated the conceptual approach and central scientific tenants of the project, and that identified a prioritized listing of technical targets for field research. This report documented the process in which: (1) scientific ground rules were developed, (2) lines of inquiry were identified and then critically evaluated, (3) promising applied research topics were highlighted in the various lines of inquiry, and (4) these were discussed and prioritized. The summary report will serve as a resource to guide management and decision-making throughout the period of the subject MNA/EPR Alternative Project. To support and more fully document the information presented in the summary report, we are publishing a series of supplemental documents that present the full texts from the technical analyses within the various lines of inquiry (see listing). The following report - documenting our evaluation of the state of the science of the characterization and monitoring process and tools-- is one of those supplemental documents.

Vangelas, K; Tom Early, T; Michael Heitkamp, M; Brian02 Looney, B; David Major, D; Brian Riha, B; Jody Waugh, J; Gary Wein, G

2004-06-18T23:59:59.000Z

14

Lack of Gender Disparities in Emergency Department Triage of Acute Stroke Patients  

E-Print Network [OSTI]

ESI triage differences in stroke severity, outcomes, andNurs. 2011;37:526-532. patients with acute ischemic stroke.J Stroke Cerebrovasc Dis. 9. Karve SJ, Balkrishnan R,

Madsen, Tracy E.; Choo, Esther K.; Seigel, Todd A.; Palms, Danielle; Silver, Brian

2015-01-01T23:59:59.000Z

15

Revisiting Bug Triage and Resolution Practices Olga Baysal, Reid Holmes, and Michael W. Godfrey  

E-Print Network [OSTI]

Revisiting Bug Triage and Resolution Practices Olga Baysal, Reid Holmes, and Michael W. Godfrey part of the software development process. In large software projects such as Eclipse or Firefox

Godfrey, Michael W.

16

Redeye: A Digital Library for Forensic Document Triage  

SciTech Connect (OSTI)

Forensic document analysis has become an important aspect of investigation of many different kinds of crimes from money laundering to fraud and from cybercrime to smuggling. The current workflow for analysts includes powerful tools, such as Palantir and Analyst s Notebook, for moving from evidence to actionable intelligence and tools for finding documents among the millions of files on a hard disk, such as FTK. However, the analysts often leave the process of sorting through collections of seized documents to filter out the noise from the actual evidence to a highly labor-intensive manual effort. This paper presents the Redeye Analysis Workbench, a tool to help analysts move from manual sorting of a collection of documents to performing intelligent document triage over a digital library. We will discuss the tools and techniques we build upon in addition to an in-depth discussion of our tool and how it addresses two major use cases we observed analysts performing. Finally, we also include a new layout algorithm for radial graphs that is used to visualize clusters of documents in our system.

Bogen, Paul Logasa [ORNL] [ORNL; McKenzie, Amber T [ORNL] [ORNL; Gillen, Rob [ORNL] [ORNL

2013-01-01T23:59:59.000Z

17

More than profits : supporting small businesses in their pursuit of the triple bottom line  

E-Print Network [OSTI]

There is growing recognition of the importance of triple bottom line (TBL) strategies that address economic, social, and environmental impacts. Cities and regions need to respond effectively to the challenges posed by ...

Aubuchon, Tara

2014-01-01T23:59:59.000Z

18

Cache directory lookup reader set encoding for partial cache line speculation support  

SciTech Connect (OSTI)

In a multiprocessor system, with conflict checking implemented in a directory lookup of a shared cache memory, a reader set encoding permits dynamic recordation of read accesses. The reader set encoding includes an indication of a portion of a line read, for instance by indicating boundaries of read accesses. Different encodings may apply to different types of speculative execution.

Gara, Alan; Ohmacht, Martin

2014-10-21T23:59:59.000Z

19

Experimental Measurements and Numerical Prediction of the Effect of Waves on Mooring Line Forces for a Container Ship Moored to Pile Supported and Solid Wall Docks  

E-Print Network [OSTI]

710 ft ship and model dock. The dock construction, solid sheet wall or pile supported, was varied to add another aspect of a moored vessel. Mooring lines were modeled using 14 springs in typical mooring line arrangement to simulate the elastic...

Luai, Andres B

2013-05-03T23:59:59.000Z

20

Sustainability Support  

Broader source: Energy.gov [DOE]

Sustainability Support serves as a corporate technical assistance, coordination, and integration resource to support line organizations in the resolution of sustainability issues and management concerns.

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Electrooxidation of acetaldehyde on a carbon supported Pt catalyst at elevated temperature/ pressure: an on-line DEMS study  

E-Print Network [OSTI]

acid show very low reactivi- ties even at 100°C, and a high apparent activation energy of 173±6 kJ mol transport conditions, employing high temperature / high pressure (3 bar overpressure) on-line differential electrochemical mass spectrometry (DEMS). Potentiodynamic and potentiostatic measure- ments of the Faradaic

Ulm, Universität

22

Data warehousing and on-line analytical processing (OLAP) are essential elements of decision support, which has  

E-Print Network [OSTI]

; front end client tools for querying and data analysis; server extensions for efficient query processing analysis, risk analysis, credit card analysis, and fraud detection), transportation (for fleet management of decision support, which has increasingly become a focus of the database industry. Many commercial products

Lakshmanan, Laks V.S.

23

1. This research was supported by General Motors R&D Center. Digest of Papers: IEEE International On-Line Testing Workshop, 1996, pp. 164-167.  

E-Print Network [OSTI]

of this technique. 1 Introduction There are four primary parameters to be considered in the design of any on-line overhead. On-line BIST is usually implemented with the goals of complete error coverage, near-minimal error On-Line Testing Workshop, 1996, pp. 164-167. Abstract This paper briefly reviews on-line built

Al-Asaad, Hussain

24

TECHNICAL BASIS FOR DOE STANDARD 3013 EQUIVALENCY SUPPORTING REDUCED TEMPERATURE STABILIZATION OF OXALATE-DERIVED PLUTONIUM OXIDE PRODUCED BY THE HB-LINE FACILITY AT SAVANNAH RIVER SITE  

SciTech Connect (OSTI)

The HB-Line (HBL) facility at the Savannah River Site (SRS) is designed to produce high-purity plutonium dioxide (PuO{sub 2}) which is suitable for future use in production of Mixed Oxide (MOX) fuel. The MOX Fuel Fabrication Facility (MFFF) requires PuO{sub 2} feed to be packaged per the U.S. Department of Energy (DOE) Standard 3013 (DOE-STD-3013) to comply with the facility's safety basis. The stabilization conditions imposed by DOE-STD-3013 for PuO{sub 2} (i.e., 950 C for 2 hours) preclude use of the HBL PuO{sub 2} in direct fuel fabrication and reduce the value of the HBL product as MFFF feedstock. Consequently, HBL initiated a technical evaluation to define acceptable operating conditions for production of high-purity PuO{sub 2} that fulfills the DOE-STD-3013 criteria for safe storage. The purpose of this document is to demonstrate that within the defined operating conditions, the HBL process will be equivalent for meeting the requirements of the DOE-STD-3013 stabilization process for plutonium-bearing materials from the DOE complex. The proposed 3013 equivalency reduces the prescribed stabilization temperature for high-purity PuO{sub 2} from oxalate precipitation processes from 950 C to 640 C and places a limit of 60% on the relative humidity (RH) at the lowest material temperature. The equivalency is limited to material produced using the HBL established flow sheet, for example, nitric acid anion exchange and Pu(IV) direct strike oxalate precipitation with stabilization at a minimum temperature of 640 C for four hours (h). The product purity must meet the MFFF acceptance criteria of 23,600 {micro}g/g Pu (i.e., 2.1 wt %) total impurities and chloride content less than 250 {micro}g/g of Pu. All other stabilization and packaging criteria identified by DOE-STD-3013-2012 or earlier revisions of the standard apply. Based on the evaluation of test data discussed in this document, the expert judgment of the authors supports packaging the HBL product under a 3013 equivalency. Under the defined process conditions and associated material specifications, the high-purity PuO{sub 2} produced in HBL presents no unique safety concerns for packaging or storage in the 3013 required configuration. The PuO{sub 2} produced using the HBL flow sheet conditions will have a higher specific surface area (SSA) than PuO{sub 2} stabilized at 950 C and, consequently, under identical conditions will adsorb more water from the atmosphere. The greatest challenge to HBL operators will be controlling moisture content below 0.5 wt %. However, even at the 0.5 wt % moisture limit, the maximum acceptable pressure of a stoichiometric mixture of hydrogen and oxygen in the 3013 container is greater than the maximum possible pressure for the HBL PuO{sub 2} product.

Duffey, J.; Livingston, R.; Berg, J.; Veirs, D.

2012-07-02T23:59:59.000Z

25

TECHNICAL BASIS FOR DOE STANDARD 3013 EQUIVALENCY SUPPORTING REDUCED TEMPERATURE STABILIZATION OF OXALATE-DERIVED PLUTONIUM DIOXIDE PRODUCED BY THE HB-LINE FACILITY AT SAVANNAH RIVER SITE  

SciTech Connect (OSTI)

This report documents the technical basis for determining that stabilizing highpurity PuO{sub 2} derived from oxalate precipitation at the SRS HB-Line facility at a minimum of 625 {degree}C for at least four hours in an oxidizing atmosphere is equivalent to stabilizing at a minimum of 950 {degree}C for at least two hours as regards meeting the objectives of stabilization defined by DOE-STD-3013 if the material is handled in a way to prevent excessive absorption of water.

Duffey, J. M.; Livingston, R. R.; Berg, J. M.; Veirs, D. K.

2013-02-06T23:59:59.000Z

26

Transmission Line Security Monitor  

ScienceCinema (OSTI)

The Transmission Line Security Monitor is a multi-sensor monitor that mounts directly on high-voltage transmission lines to detect, characterize and communicate terrorist activity, human tampering and threatening conditions around support towers. For more information about INL's critical infrastructure protection research, visit http://www.facebook.com/idahonationallaboratory.

None

2013-05-28T23:59:59.000Z

27

Installation and Final Testing of an On-Line, Multi-Spectrometer Fission Product Monitoring System (FPMS) to Support Advanced Gas Reactor (AGR) Fuel Testing and Qualification in the Advanced Test Reactor  

SciTech Connect (OSTI)

The US Department of Energy (DOE) is initiating tests of reactor fuel for use in an Advanced Gas Reactor (AGR). The AGR will use helium coolant, a low-power-density ceramic core, and coated-particle fuel. A series of eight (8) fuel irradiation tests are planned for the Idaho National Laboratorys (INLs) Advanced Test Reactor (ATR). One important measure of fuel performance in these tests is quantification of the fission gas releases over the nominal 2-year duration of each irradiation experiment. This test objective will be met using the AGR Fission Product Monitoring System (FPMS) which includes seven (7) on-line detection stations viewing each of the six test capsule effluent lines (plus one spare). Each station incorporates both a heavily-shielded high-purity germanium (HPGe) gamma-ray spectrometer for quantification of the isotopic releases, and a NaI(Tl) scintillation detector to monitor the total count rate and identify the timing of the releases. The AGR-1 experiment will begin irradiation after October 1, 2006. To support this experiment, the FPMS has been completely assembled, tested, and calibrated in a laboratory at the INL, and then reassembled and tested in its final location in the ATR reactor basement. This paper presents the details of the equipment performance, the control and acquisition software, the test plan for the irradiation monitoring, and the installation in the ATR basement. Preliminary on-line data may be available by the Conference date.

J. K. Hartwell; D. M. Scates; M. W. Drigert; J. B. Walter

2006-10-01T23:59:59.000Z

28

Preliminary Results of an On-Line, Multi-Spectrometer Fission Product Monitoring System to Support Advanced Gas Reactor Fuel Testing and Qualification in the Advanced Test Reactor at the Idaho National Laboratory  

SciTech Connect (OSTI)

The Advanced Gas Reactor -1 (AGR-1) experiment is the first experiment in a series of eight separate low enriched uranium (LEU) oxycarbide (UCO) tri-isotropic (TRISO) particle fuel (in compact form) experiments scheduled for placement in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The experiment began irradiation in the ATR with a cycle that reached full power on December 26, 2006 and will continue irradiation for about 2.5 years. During this time six separate capsules, will be irradiated in an inert sweep gas atmosphere with individual on-line fission product monitoring on its effluent to track performance of the fuel in each individual capsule during irradiation. The goals of the irradiation experiment is to provide irradiation performance data to support fuel process development, to qualify fuel for normal operating conditions, to support development and validation of fuel, and to provide irradiated fuel and materials for post irradiation examination (PIE) and safety testing. This paper presents the preliminary test details of the fuel performance, as measured by the control and acquisition software.

Dawn M. Scates; John K. Hartwell; John B. Walter; Mark W. Drigert

2007-10-01T23:59:59.000Z

29

Power line detection system  

DOE Patents [OSTI]

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard.

Latorre, Victor R. (Tracy, CA); Watwood, Donald B. (Tracy, CA)

1994-01-01T23:59:59.000Z

30

Power line detection system  

DOE Patents [OSTI]

A short-range, radio frequency (RF) transmitting-receiving system that provides both visual and audio warnings to the pilot of a helicopter or light aircraft of an up-coming power transmission line complex. Small, milliwatt-level narrowband transmitters, powered by the transmission line itself, are installed on top of selected transmission line support towers or within existing warning balls, and provide a continuous RF signal to approaching aircraft. The on-board receiver can be either a separate unit or a portion of the existing avionics, and can also share an existing antenna with another airborne system. Upon receipt of a warning signal, the receiver will trigger a visual and an audio alarm to alert the pilot to the potential power line hazard. 4 figs.

Latorre, V.R.; Watwood, D.B.

1994-09-27T23:59:59.000Z

31

Transmission line capital costs  

SciTech Connect (OSTI)

The displacement or deferral of conventional AC transmission line installation is a key benefit associated with several technologies being developed with the support of the U.S. Department of Energy`s Office of Energy Management (OEM). Previous benefits assessments conducted within OEM have been based on significantly different assumptions for the average cost per mile of AC transmission line. In response to this uncertainty, an investigation of transmission line capital cost data was initiated. The objective of this study was to develop a database for preparing preliminary estimates of transmission line costs. An extensive search of potential data sources identified databases maintained by the Bonneville Power Administration (BPA) and the Western Area Power Administration (WAPA) as superior sources of transmission line cost data. The BPA and WAPA data were adjusted to a common basis and combined together. The composite database covers voltage levels from 13.8 to 765 W, with cost estimates for a given voltage level varying depending on conductor size, tower material type, tower frame type, and number of circuits. Reported transmission line costs vary significantly, even for a given voltage level. This can usually be explained by variation in the design factors noted above and variation in environmental and land (right-of-way) costs, which are extremely site-specific. Cost estimates prepared from the composite database were compared to cost data collected by the Federal Energy Regulatory Commission (FERC) for investor-owned utilities from across the United States. The comparison was hampered because the only design specifications included with the FERC data were voltage level and line length. Working within this limitation, the FERC data were not found to differ significantly from the composite database. Therefore, the composite database was judged to be a reasonable proxy for estimating national average costs.

Hughes, K.R.; Brown, D.R.

1995-05-01T23:59:59.000Z

32

Transmission Lines Emulating Moving Media  

E-Print Network [OSTI]

In this paper, we show how the electromagnetic phenomena in moving magnetodielectric media can be emulated using artificial composite structures at rest. In particular, we introduce nonreciprocal periodically loaded transmission lines which support waves obeying the same rules as plane electromagnetic waves in moving media. Because the actual physical structure is at rest, in these transmission lines there are no fundamental limitations on the velocity values, which may take values larger than the speed of light or even complex values (considering complex amplitudes in the time-harmonic regime). An example circuit of a unit cell of a "moving" transmission line is presented and analyzed both numerically and experimentally. The special case of composite right/left handed host line is also studied numerically. Besides the fundamental interest, the study is relevant for potential applications in realizing engineered materials for various transformations of electromagnetic fields.

Vehmas, Joni; Tretyakov, Sergei

2014-01-01T23:59:59.000Z

33

Transmission Line Security Monitor: Final Report  

SciTech Connect (OSTI)

The Electric Power Transmission Line Security Monitor System Operational Test is a project funded by the Technical Support Working Group (TSWG). TSWG operates under the Combating Terrorism Technical Support Office that functions under the Department of Defense. The Transmission Line Security Monitor System is based on technology developed by Idaho National Laboratory. The technology provides a means for real-time monitoring of physical threats and/or damage to electrical transmission line towers and conductors as well as providing operational parameters to transmission line operators to optimize transmission line operation. The end use is for monitoring long stretches of transmission lines that deliver electrical power from remote generating stations to cities and industry. These transmission lines are generally located in remote transmission line corridors where security infrastructure may not exist. Security and operational sensors in the sensor platform on the conductors take power from the transmission line and relay security and operational information to operations personnel hundreds of miles away without relying on existing infrastructure. Initiated on May 25, 2007, this project resulted in pre-production units tested in realistic operational environments during 2010. A technology licensee, Lindsey Manufacturing of Azusa California, is assisting in design, testing, and ultimately production. The platform was originally designed for a security monitoring mission, but it has been enhanced to include important operational features desired by electrical utilities.

John Svoboda

2011-04-01T23:59:59.000Z

34

Student On Line Access to Records Provides on-line, self service access to  

E-Print Network [OSTI]

SOLAR Student On Line Access to Records #12;Provides on-line, self service access to: Registrar Enrollment Appointments · Review Solar Messages Student Account/ Financial Aid: · View Support offered (available aid ­ i.e. Federal loans, scholarships, etc.) · Accept financial aid (i.e. loans, etc.) ­ loan

35

Energy Ambassadors to Provide Front Line Support for Alaska Native...  

Office of Environmental Management (EM)

in an the initial facilitation workshop for Alaska Energy Ambassadors held at the U.S. Fish & Wildlife Service Regional Office in Anchorage in September. Photo by Jared Temanson,...

36

Stand-off transmission lines and method for making same  

DOE Patents [OSTI]

Standoff transmission lines in an integrated circuit structure are formed by etching away or removing the portion of the dielectric layer separating the microstrip metal lines and the ground plane from the regions that are not under the lines. The microstrip lines can be fabricated by a subtractive process of etching a metal layer, an additive process of direct laser writing fine lines followed by plating up the lines or a subtractive/additive process in which a trench is etched over a nucleation layer and the wire is electrolytically deposited. Microstrip lines supported on freestanding posts of dielectric material surrounded by air gaps are produced. The average dielectric constant between the lines and ground plane is reduced, resulting in higher characteristic impedance, less crosstalk between lines, increased signal propagation velocities, and reduced wafer stress. 16 figures.

Tuckerman, D.B.

1991-05-21T23:59:59.000Z

37

Stand-off transmission lines and method for making same  

DOE Patents [OSTI]

Standoff transmission lines in an integrated circuit structure are formed by etching away or removing the portion of the dielectric layer separating the microstrip metal lines and the ground plane from the regions that are not under the lines. The microstrip lines can be fabricated by a subtractive process of etching a metal layer, an additive process of direct laser writing fine lines followed by plating up the lines or a subtractive/additive process in which a trench is etched over a nucleation layer and the wire is electrolytically deposited. Microstrip lines supported on freestanding posts of dielectric material surrounded by air gaps are produced. The average dielectric constant between the lines and ground plane is reduced, resulting in higher characteristic impedance, less crosstalk between lines, increased signal propagation velocities, and reduced wafer stress.

Tuckerman, David B. (Livermore, CA)

1991-01-01T23:59:59.000Z

38

In-line thermoelectric module  

DOE Patents [OSTI]

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions may be perpendicular to the direction of current flow through the module.

Pento, Robert (Algonquin, IL); Marks, James E. (Glenville, NY); Staffanson, Clifford D. (S. Glens Falls, NY)

2000-01-01T23:59:59.000Z

39

In-Line Thermoelectric Module  

SciTech Connect (OSTI)

A thermoelectric module with a plurality of electricity generating units each having a first end and a second end, the units being arranged first end to second end along an-in-line axis. Each unit includes first and second elements each made of a thermoelectric material, an electrically conductive hot member arranged to heat one side of the first element, and an electrically conductive cold member arranged to cool another side of the first element and to cool one side of the second element. The hot member, the first element, the cold member and the second element are supported in a fixture, are electrically connected respectively to provide an electricity generating unit, and are arranged respectively in positions along the in-line axis. The individual components of each generating unit and the respective generating units are clamped in their in-line positions by a loading bolt at one end of the fixture and a stop wall at the other end of the fixture. The hot members may have a T-shape and the cold members an hourglass shape to facilitate heat transfer. The direction of heat transfer through the hot members may be perpendicular to the direction of heat transfer through the cold members, and both of these heat transfer directions maybe perpendicular to the direction-of current flow through the module.

Pento, Robert; Marks, James E.; Staffanson, Clifford D.

1998-07-28T23:59:59.000Z

40

Incorporating on-line process data into a diagnostic knowledge-based system  

E-Print Network [OSTI]

The objective of this research was to develop and implement an on-line gypsum wallboard manufacturing expert system incorporating on-line process monitoring information and statistical process control. In support of this objective, several sub...

Lin, Kai Hsuan

1994-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Series Transmission Line Transformer  

DOE Patents [OSTI]

A series transmission line transformer is set forth which includes two or more of impedance matched sets of at least two transmissions lines such as shielded cables, connected in parallel at one end ans series at the other in a cascading fashion. The cables are wound about a magnetic core. The series transmission line transformer (STLT) which can provide for higher impedance ratios and bandwidths, which is scalable, and which is of simpler design and construction.

Buckles, Robert A. (Livermore, CA); Booth, Rex (Livermore, CA); Yen, Boris T. (El Cerrito, CA)

2004-06-29T23:59:59.000Z

42

Federal Line Management Oversight of Department of Energy Nuclear Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Guide was developed in support of DOE O 226.1B to provide guidance that may be useful to DOE line management organizations in meeting the provisions of that order when applied to nuclear facilities.

2014-04-14T23:59:59.000Z

43

Federal Line Management Oversight of Department of Energy Nuclear Facilities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

The Guide was developed in support of DOE O 226.1B to provide guidance that may be useful to DOE line management organizations in meeting the provisions of that order when applied to nuclear facilities.

2013-04-04T23:59:59.000Z

44

Electric Transmission Lines (Nebraska)  

Broader source: Energy.gov [DOE]

The Public Service Commission has jurisdiction over all electricity transmission lines crossing over or under railroad tracks at public highway crossings. This section contains general regulations...

45

Geodesic Lines, . . . Covariant . . .  

E-Print Network [OSTI]

Geodesic Lines, . . . Covariant . . . Home Page Title Page Page 781 of 818 Go Back Full Screen Close Quit 14.11. Geodesic Lines, Local Gauss-Bonnet Theorem Geodesics play a very important role in surface theory and in dynamics. One of the main reasons why geodesics are so important

Gallier, Jean

46

Boron-10 Lined Proportional Counter Wall Effects  

SciTech Connect (OSTI)

The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project 'Coincidence Counting With Boron-Based Alternative Neutron Detection Technology' at Pacific Northwest National Laboratory (PNNL) for development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube based system in the configuration of a coincidence counter. This report provides information about how variations in proportional counter radius and gas pressure in a typical coincident counter design might affect the observed signal from boron-lined tubes. A discussion comparing tubes to parallel plate counters is also included.

Siciliano, Edward R.; Kouzes, Richard T.

2012-05-01T23:59:59.000Z

47

Intrinsic AGN Absorption Lines  

E-Print Network [OSTI]

Strong absorption lines are common in rest-frame UV spectra of AGNs due to a variety of resonant transitions, for example the HI Lyman series lines (most notably Ly-alpha 1216) and high-ionization doublets like CIV 1549,1551. The lines are called ``intrinsic'' if the absorbing gas is physically related to the AGN, e.g. if the absorber resides broadly within the radius of the AGN's surrounding ``host'' galaxy. Intrinsic absorption lines are thus valuable probes of the kinematics, physical conditions and elemental abundances in the gas near AGNs. Studies of intrinsic absorbers have historically emphasized the broad absorption lines (BALs) in quasars. Today we recognize a wider variety of intrinsic lines in a wider range of objects. For example, we now know that Seyfert 1 galaxies (the less luminous cousins of quasars) have intrinsic absorption. We also realize that intrinsic lines can form in a range of AGN environments --- from the dynamic inner regions like the BALs, to the more quiescent outer host galaxies >10 kpc away. This article provides a brief introduction to current observational and theoretical work on intrinsic AGN absorbers.

Fred Hamann

2000-06-12T23:59:59.000Z

48

Radiological Triage | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Data results provided back to the field within 30-60 minutes. All NNSA teams that conduct search, detection and identification operations, to include the Radiological...

49

Data triage enables extreme-scale computing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: Vegetation Proposed Newcatalyst phasesData Files Data Files 1 EIA Best Estimate ofand Analytics

50

Data triage enables extreme-scale computing  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsruc DocumentationP-Series to UserProduct: CrudeOffice ofINL is aID Service First DOIDataDTN

51

Coherent soliton communication lines  

SciTech Connect (OSTI)

The data transmission in coherent fiber-optical communication lines using solitons with a variable phase is studied. It is shown that nonlinear coherent structures (solitons) can be applied for effective signal transmission over a long distance using amplitude and optical-phase keying of information. The optimum ratio of the pulse width to the bit slot at which the spectral efficiency (transmitted bits per second and hertz) is maximal is determined. It is shown that soliton fiber-optical communication lines can ensure data transmission at a higher spectral efficiency as compared to traditional communication lines and at a high signal-to-noise ratio.

Yushko, O. V., E-mail: olesya.yushko@gmail.com; Redyuk, A. A.; Fedoruk, M. P.; Turitsyn, S. K. [Novosibirsk State University (Russian Federation)

2014-11-15T23:59:59.000Z

52

Electric Transmission Lines (Iowa)  

Broader source: Energy.gov [DOE]

Electric transmission lines capable of operating at 69 kV or greater cannot be constructed along, across, or over any public highways or grounds outside of cities without a franchise from the...

53

Holes in Spectral Lines  

E-Print Network [OSTI]

The decay of an atom in the presence of a static perturbation is investigated. The perturbation couples a decaying state with a nondecaying state. A "hole" appears in the emission line at a frequency equal to the frequency ...

Fontana, Peter R.; Srivastava, Rajendra P.

1973-06-01T23:59:59.000Z

54

Line Extension Alternatives  

Broader source: Energy.gov [DOE]

The Public Service Board (PSB) of Vermont developed rules regarding utility line extension requests. While the majority of the rules focus on the procedure followed (and associated fees) for the...

55

E-Print Network 3.0 - advanced cancer support Sample Search Results  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Powered by Explorit Topic List Advanced Search Sample search results for: advanced cancer support Page: << < 1 2 3 4 5 > >> 1 Stanford Cancer Clinical Trials Information Line...

56

Reactor vessel support system  

DOE Patents [OSTI]

A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

Golden, Martin P. (Trafford, PA); Holley, John C. (McKeesport, PA)

1982-01-01T23:59:59.000Z

57

IS&T FY2009 Operational Plans Page 1 of 17 Current as of July 22, 2008 Functional Area: Client Support Services  

E-Print Network [OSTI]

-line mechanisms Improve tools to enhance delivery of support services (e.g. eOn implementation, Request Tracker

Gabrieli, John

58

Enabling Services Dyslexia Support  

E-Print Network [OSTI]

Enabling Services Dyslexia Support information for students website: www.soton.ac.uk/edusupport/dyslexia, George Thomas Building (37), Highfield Campus #12;2 Contents About Dyslexia Support.........................................................11 National and Local Organisations: .....................................12 #12;3 About Dyslexia

Anderson, Jim

59

TEMPORARY SUPPORT HUMAN RESOURCES  

E-Print Network [OSTI]

TEMPORARY SUPPORT HUMAN RESOURCES GUIDELINE Workforce Planning | One Washington Square | San José of the Request for Temporary Support, Workforce Planning will make a determination of the type of temporary

Su, Xiao

60

Emergency Medical Support  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

This volume defines coordination between emergency planners and emergency medical support. Canceled by DOE G 151.1-4.

1997-08-21T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Enabling Services Dyslexia Support  

E-Print Network [OSTI]

Enabling Services Dyslexia Support Information for students Support for students with specific learning difficulties such as dyslexia and dyspraxia Email: enable@soton.ac.uk Tel: 023 8059 7726 Student Services Centre Building (37) Highfield Campus #12;2 Contents About Dyslexia Support

Anderson, Jim

62

Office of Sustainability Support  

Broader source: Energy.gov [DOE]

The Office of Sustainability Support serves as AUs organizational lead in partnering with the Departments Sustainability Performance Office to support the understanding and implementation of sustainability programs and requirements within the Department, including through supporting development and implementation of DOEs annual Strategic Sustainability Program Plan.

63

Supported microporous ceramic membranes  

DOE Patents [OSTI]

A method for permformation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms.

Webster, Elizabeth (Madison, WI); Anderson, Marc (Madison, WI)

1993-01-01T23:59:59.000Z

64

Supported microporous ceramic membranes  

DOE Patents [OSTI]

A method for the formation of microporous ceramic membranes onto a porous support includes placing a colloidal suspension of metal or metal oxide particles on one side of the porous support and exposing the other side of the porous support to a drying stream of gas or a reactive gas stream so that the particles are deposited on the drying side of the support as a gel. The gel so deposited can be sintered to form a supported ceramic membrane useful for ultrafiltration, reverse osmosis, or molecular sieving having mean pore sizes less than 100 Angstroms. 4 figures.

Webster, E.; Anderson, M.

1993-12-14T23:59:59.000Z

65

Omega Transmission Lines  

E-Print Network [OSTI]

In this paper, we show how bi-anisotropic media with omega-type response can be realized using periodically loaded transmission lines. General conditions for the needed unit cell circuit block are derived. Also, an implementation is shown and analyzed.

Vehmas, Joni

2013-01-01T23:59:59.000Z

66

Printed circuit dispersive transmission line  

DOE Patents [OSTI]

A printed circuit dispersive transmission line structure is disclosed comprising an insulator, a ground plane formed on one surface of the insulator, a first transmission line formed on a second surface of the insulator, and a second transmission line also formed on the second surface of the insulator and of longer length than the first transmission line and periodically intersecting the first transmission line. In a preferred embodiment, the transmission line structure exhibits highly dispersive characteristics by designing the length of one of the transmission line between two adjacent periodic intersections to be longer than the other. 5 figures.

Ikezi, H.; Lin-Liu, Y.R.; DeGrassie, J.S.

1991-08-27T23:59:59.000Z

67

Cryogenic support system  

DOE Patents [OSTI]

A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member. 7 figs.

Nicol, T.H.; Niemann, R.C.; Gonczy, J.D.

1988-11-01T23:59:59.000Z

68

Cryogenic support system  

DOE Patents [OSTI]

A support system is disclosed for restraining large masses at very low or cryogenic temperatures. The support system employs a tie bar that is pivotally connected at opposite ends to an anchoring support member and a sliding support member. The tie bar extends substantially parallel to the longitudinal axis of the cold mass assembly, and comprises a rod that lengthens when cooled and a pair of end attachments that contract when cooled. The rod and end attachments are sized so that when the tie bar is cooled to cryogenic temperature, the net change in tie bar length is approximately zero. Longitudinal force directed against the cold mass assembly is distributed by the tie bar between the anchoring support member and the sliding support member.

Nicol, Thomas H. (Aurora, IL); Niemann, Ralph C. (Downers Grove, IL); Gonczy, John D. (Oak Lawn, IL)

1988-01-01T23:59:59.000Z

69

Conduction cooled tube supports  

DOE Patents [OSTI]

In boilers, process tubes are suspended by means of support studs that are in thermal contact with and attached to the metal roof casing of the boiler and the upper bend portions of the process tubes. The support studs are sufficiently short that when the boiler is in use, the support studs are cooled by conduction of heat to the process tubes and the roof casing thereby maintaining the temperature of the stud so that it does not exceed 1400.degree. F.

Worley, Arthur C. (Mt. Tabor, NJ); Becht, IV, Charles (Morristown, NJ)

1984-01-01T23:59:59.000Z

70

Crystalline titanate catalyst supports  

DOE Patents [OSTI]

A series of new crystalline titanates (CT) are shown to have considerable potential as catalyst supports. For Pd supported catalyst, the catalytic activity for pyrene hydrogenation was substantially different depending on the type of CT, and one was substantially more active than Pd on hydrous titanium oxide (HTO). For 1-hexene hydrogenation the activities of the new CTs were approximately the same as for the hydrous metal oxide supports.

Anthony, R.G.; Dosch, R.G.

1993-01-05T23:59:59.000Z

71

Vessel structural support system  

DOE Patents [OSTI]

Vessel structural support system for laterally and vertically supporting a vessel, such as a nuclear steam generator having an exterior bottom surface and a side surface thereon. The system includes a bracket connected to the bottom surface. A support column is pivotally connected to the bracket for vertically supporting the steam generator. The system also includes a base pad assembly connected pivotally to the support column for supporting the support column and the steam generator. The base pad assembly, which is capable of being brought to a level position by turning leveling nuts, is anchored to a floor. The system further includes a male key member attached to the side surface of the steam generator and a female stop member attached to an adjacent wall. The male key member and the female stop member coact to laterally support the steam generator. Moreover, the system includes a snubber assembly connected to the side surface of the steam generator and also attached to the adjacent wall for dampening lateral movement of the steam generator. In addition, the system includes a restraining member of "flat" attached to the side surface of the steam generator and a bumper attached to the adjacent wall. The flat and the bumper coact to further laterally support the steam generator.

Jenko, James X. (N. Versailles, PA); Ott, Howard L. (Kiski Twp., Allegheny County, PA); Wilson, Robert M. (Plum Boro, PA); Wepfer, Robert M. (Murrysville, PA)

1992-01-01T23:59:59.000Z

72

Drill string transmission line  

DOE Patents [OSTI]

A transmission line assembly for transmitting information along a downhole tool comprising a pin end, a box end, and a central bore traveling between the pin end and the box end, is disclosed in one embodiment of the invention as including a protective conduit. A transmission line is routed through the protective conduit. The protective conduit is routed through the central bore and the ends of the protective conduit are routed through channels formed in the pin end and box end of the downhole tool. The protective conduit is elastically forced into a spiral or other non-linear path along the interior surface of the central bore by compressing the protective conduit to a length within the downhole tool shorter than the protective conduit.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David S. (Lehi, UT); Bradford, Kline (Orem, UT); Fox, Joe (Spanish Fork, UT)

2006-03-28T23:59:59.000Z

73

Enabling Services Dyslexia Support  

E-Print Network [OSTI]

Enabling Services Dyslexia Support Information for Students Website: www.soton.ac.uk/edusupport/dyslexia Contact details Telephone: 023 8059 7726 Email: enable@soton.ac.uk #12;2 About Dyslexia Support · We are a team of specialist dyslexia practitioners within the University of Southampton's Enabling Services

Molinari, Marc

74

Nanostructured catalyst supports  

DOE Patents [OSTI]

The present invention relates to SiC nanostructures, including SiC nanopowder, SiC nanowires, and composites of SiC nanopowder and nanowires, which can be used as catalyst supports in membrane electrode assemblies and in fuel cells. The present invention also relates to composite catalyst supports comprising nanopowder and one or more inorganic nanowires for a membrane electrode assembly.

Zhu, Yimin; Goldman, Jay L.; Qian, Baixin; Stefan, Ionel C.

2012-10-02T23:59:59.000Z

75

Supporting Document Strategic Plan  

E-Print Network [OSTI]

1 Supporting Document Strategic Plan 20132020 #12;2 Supporting Document Strategic Plan 2013 more critical to the University's future than was the case in 2005. The purpose of this document are summarised via a SWOT analysis in Appendix 1. This document should therefore be read in conjunction

Auckland, University of

76

Steam generator support system  

DOE Patents [OSTI]

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source is disclosed. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances. 4 figs.

Moldenhauer, J.E.

1987-08-25T23:59:59.000Z

77

Steam generator support system  

DOE Patents [OSTI]

A support system for connection to an outer surface of a J-shaped steam generator for use with a nuclear reactor or other liquid metal cooled power source. The J-shaped steam generator is mounted with the bent portion at the bottom. An arrangement of elongated rod members provides both horizontal and vertical support for the steam generator. The rod members are interconnected to the steam generator assembly and a support structure in a manner which provides for thermal distortion of the steam generator without the transfer of bending moments to the support structure and in a like manner substantially minimizes forces being transferred between the support structure and the steam generator as a result of seismic disturbances.

Moldenhauer, James E. (Simi Valley, CA)

1987-01-01T23:59:59.000Z

78

Consortium Support (Fixed Support) | Department of Energy  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energyon ArmedWaste andAccessCO2 InjectionDepartmentServicesImporter Q&AsSupport (Fixed

79

Boron-10 Lined Proportional Counter Model Validation  

SciTech Connect (OSTI)

The Department of Energy Office of Nuclear Safeguards (NA-241) is supporting the project Coincidence Counting With Boron-Based Alternative Neutron Detection Technology at Pacific Northwest National Laboratory (PNNL) for the development of an alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a boron-lined proportional tube-based alternative system in the configuration of a coincidence counter. This report discusses the validation studies performed to establish the degree of accuracy of the computer modeling methods current used to simulate the response of boron-lined tubes. This is the precursor to developing models for the uranium neutron coincidence collar under Task 2 of this project.

Lintereur, Azaree T.; Siciliano, Edward R.; Kouzes, Richard T.

2012-06-30T23:59:59.000Z

80

Utility Lines and Facilities (Montana)  

Broader source: Energy.gov [DOE]

These regulations apply to the construction of utility and power lines and facilities. They address the use of public right-of-ways for such construction, underground power lines, and construction...

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Support Requirements for Synfuels  

E-Print Network [OSTI]

FORMS OF GOVERNMENT SUPPORT A number of possibilities exist to get the first wave of Synthetic Fuel plants built (Figure 9). GO/CO's (Government Owned/Contractor Operated plants) - We built plants this way during WWII (Synthetic Rubber etc...

Hyland, M. J.

1981-01-01T23:59:59.000Z

82

Chromatography resin support  

DOE Patents [OSTI]

An apparatus and method of using an improved chromatography resin support is disclosed. The chromatography support platform is provided by a stainless steel hollow cylinder adapted for being inserted into a chromatography column. An exterior wall of the stainless steel cylinder defines a groove for carrying therein an "O"-ring. The upper surface of the stainless steel column is covered by a fine stainless steel mesh welded to the edges of the stainless steel cylinder. When placed upon a receiving ledge defined within a chromatography column, the "O"-ring provides a fluid tight seal with the inner edge wall of the chromatography cylinder. The stainless steel mesh supports the chromatography matrix and provides a back flushable support which is economical and simple to construct.

Dobos, James G. (North Augusta, SC)

2002-01-01T23:59:59.000Z

83

Program Support Specialist  

Broader source: Energy.gov [DOE]

The Office of Science is the single largest supporter of basic research in the physical sciences in the United States, providing more than 40 percent of total funding for this vital area of...

84

Administrative Support Specialist  

Broader source: Energy.gov [DOE]

The Office of Science is the single largest supporter of basic research in the physical sciences in the United States, providing more than 40 percent of total funding for this vital area of...

85

Fuel rod support grid  

DOE Patents [OSTI]

A grid for the support of nuclear fuel rods arranged in a triangular array. The grid is formed by concentric rings of strap joined by radially arranged web sections.

Downs, Robert E. (Monroeville, PA); Schwallie, Ambrose L. (Greensburg, PA)

1985-01-01T23:59:59.000Z

86

Supported inorganic membranes  

DOE Patents [OSTI]

Supported inorganic membranes capable of molecular sieving, and methods for their production, are provided. The subject membranes exhibit high flux and high selectivity. The subject membranes are substantially defect free and less than about 100 nm thick. The pores of the subject membranes have an average critical pore radius of less than about 5 .ANG., and have a narrow pore size distribution. The subject membranes are prepared by coating a porous substrate with a polymeric sol, preferably under conditions of low relative pressure of the liquid constituents of the sol. The coated substrate is dried and calcined to produce the subject supported membrane. Also provided are methods of derivatizing the surface of supported inorganic membranes with metal alkoxides. The subject membranes find use in a variety of applications, such as the separation of constituents of gaseous streams, as catalysts and catalyst supports, and the like.

Sehgal, Rakesh (Albuquerque, NM); Brinker, Charles Jeffrey (Albuquerque, NM)

1998-01-01T23:59:59.000Z

87

Coronal emission lines as thermometers  

E-Print Network [OSTI]

Coronal emission line intensities are commonly used to measure electron temperatures using emission measure and/or line ratio methods. In the presence of systematic errors in atomic excitation calculations and data noise, the information on underlying temperature distributions is fundamentally limited. Increasing the number of emission lines used does not necessarily improve the ability to discriminate between different kinds of temperature distributions.

Judge, Philip G

2009-01-01T23:59:59.000Z

88

SAE Standards Support  

SciTech Connect (OSTI)

This report summarizes PNNL activities in FY 2012 in support of the following two vehicle communication standards activities: Technical support to SAE, ANSI and NIST technical working groups. PNNL actively contributed to the use case development, harmonization, and evaluation of the SAE standards activities for vehicle to grid communication Tested and validated a set of potential technologies for meeting SAE communication requirements and provided recommendations for technology choices.

Gowri, Krishnan

2012-11-01T23:59:59.000Z

89

Supporting Methods Sampling error  

E-Print Network [OSTI]

of 0.79, 0.07, 0.07, 0.07. The chart below gives a sense of the magnitude of these values. 1 #12 each of the selections are shown in order from highest affinity for GTP to lowest. The top line in each

Heller, Eric

90

Concentric tube support assembly  

SciTech Connect (OSTI)

An assembly (45) includes a plurality of separate pie-shaped segments (72) forming a disk (70) around a central region (48) for retaining a plurality of tubes (46) in a concentrically spaced apart configuration. Each segment includes a support member (94) radially extending along an upstream face (96) of the segment and a plurality of annularly curved support arms (98) transversely attached to the support member and radially spaced apart from one another away from the central region for receiving respective upstream end portions of the tubes in arc-shaped spaces (100) between the arms. Each segment also includes a radial passageway (102) formed in the support member for receiving a fluid segment portion (106) and a plurality of annular passageways (104) formed in the support arms for receiving respective arm portions (108) of the fluid segment portion from the radial passageway and for conducting the respective arm portions into corresponding annular spaces (47) formed between the tubes retained by the disk.

Rubio, Mark F.; Glessner, John C.

2012-09-04T23:59:59.000Z

91

Crank shaft support assembly  

DOE Patents [OSTI]

A crank shaft support assembly for increasing stiffness and reducing thermal mismatch distortion in a crank shaft bore of an engine comprising different materials. A cylinder block comprises a first material and at least two crank journal inserts are insert-molded into respective crank journal regions of the cylinder block and comprise a second material having greater stiffness and a lower thermal coefficient of expansion that the first material. At least two bearing caps are bolted to the respective crank journal inserts and define, along with the crank journal inserts, at least two crank shaft support rings defining a crank shaft bore coaxially aligned with a crank shaft axis. The bearing caps comprise a material having higher stiffness and a lower thermal coefficient of expansion than the first material and are supported on the respective crank journal inserts independently of any direct connection to the cylinder block.

Natkin, Robert J. (Canton, MI); Oltmans, Bret (Stacy, MN); Allison, John E. (Ann Arbor, MI); Heater, Thomas J. (Milford, MI); Hines, Joy Adair (Plymouth, MI); Tappen, Grant K. (Washington, MI); Peiskammer, Dietmar (Rochester, MI)

2007-10-23T23:59:59.000Z

92

Aerogel-supported filament  

DOE Patents [OSTI]

The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces.

Wuest, Craig R. (Danville, CA); Tillotson, Thomas M. (Tracy, CA); Johnson, III, Coleman V. (Dallas, TX)

1995-01-01T23:59:59.000Z

93

Aerogel-supported filament  

DOE Patents [OSTI]

The present invention is a thin filament embedded in a low density aerogel for use in radiation detection instruments and incandescent lamps. The aerogel provides a supportive matrix that is thermally and electrically nonconductive, mechanically strong, highly porous, gas-permeable, and transparent to ionizing radiation over short distances. A low density, open-cell aerogel is cast around a fine filament or wire, which allows the wire to be positioned with little or no tension and keeps the wire in place in the event of breakage. The aerogel support reduces the stresses on the wire caused by vibrational, gravitational, electrical, and mechanical forces. 6 Figs.

Wuest, C.R.; Tillotson, T.M.; Johnson, C.V. III

1995-05-16T23:59:59.000Z

94

Lecture outline Support vector machines  

E-Print Network [OSTI]

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution #12;Support Vector Machines · Another possible solution #12;Support Vector Machines · Other possible solutions

Terzi, Evimaria

95

Lecture outline Support vector machines  

E-Print Network [OSTI]

Lecture outline · Support vector machines #12;Support Vector Machines · Find a linear hyperplane (decision boundary) that will separate the data #12;Support Vector Machines · One Possible Solution B1 #12;Support Vector Machines · Another possible solution B2 #12;Support Vector Machines · Other possible

Terzi, Evimaria

96

Simulation Supported Decision Making  

E-Print Network [OSTI]

.S. Navy Nuclear Program · Decades of dynamic operations of hundreds of nuclear power plants withoutSimulation Supported Decision Making Gene Allen Naval Surface Warfare Center Carderock Division SI: TO PASS ON WHAT I KNOW on SIMULATION · CAREER FOCUS: HOW TO USE COMPUTERS TO DO HELP MAKE BETTER DECISIONS

97

Respiratory Mechanisms of Support  

E-Print Network [OSTI]

Respiratory Mechanisms of Support Nasal Cannula Hi Flow Nasal Cannula CPAP Continuous positive the respiratory system is working to compensate for a metabolic issue so as to normalize the blood pH. HCO3 - 22 uses PIP Mechanical Ventilation: Volume vs. Pressure: Volume Control Pressure Control Cycle Volume Time

Kay, Mark A.

98

Bipolar pulse forming line  

DOE Patents [OSTI]

A bipolar pulse forming transmission line module for linear induction accelerators having first, second, third, fourth, and fifth planar conductors which form an interleaved stack with dielectric layers between the conductors. Each conductor has a first end, and a second end adjacent an acceleration axis. The first and second planar conductors are connected to each other at the second ends, the fourth and fifth planar conductors are connected to each other at the second ends, and the first and fifth planar conductors are connected to each other at the first ends via a shorting plate adjacent the first ends. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short a high voltage from the first end of the third planar conductor to the first end of the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2008-10-21T23:59:59.000Z

99

AdWords and Generalized On-line Matching Aranyak Mehta  

E-Print Network [OSTI]

AdWords and Generalized On-line Matching Aranyak Mehta Amin Saberi Umesh Vazirani Vijay Vazirani University, saberi@stanford.edu. Supported by NSF Career Award and a gift from Google. Computer Science Dept

Vazirani, Umesh

100

NETL LINES OF DEMARCATION 09282012  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

LINES OF DEMARCATION September 28, 2012 Contact: Site Operations Division or ESS&H Division with Questions The oversight, upkeep, and segregation of NETL infrastructure components,...

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Michigan Collateral Support Program (Michigan)  

Broader source: Energy.gov [DOE]

The Michigan Collateral Support Program, supported by the Michigan Growth Fund, aims to supply cash collateral accounts to lenders in order to assist borrowers collateral coverage needs. To...

102

Visualization and Analysis in Support of Fusion Science  

SciTech Connect (OSTI)

This report summarizes the results of the award for Visualization and Analysis in Support of Fusion Science. With this award our main efforts have been to develop and deploy visualization and analysis tools in three areas 1) magnetic field line analysis 2) query based visualization and 3) comparative visualization.

Sanderson, Allen R. [Scientific Computing and Imaging Institute] [Scientific Computing and Imaging Institute

2012-10-01T23:59:59.000Z

103

Characterization Plan for Soils Around Drain Line PLA-100115  

SciTech Connect (OSTI)

This Characterization Plan supports the Hazardous Waste Management Act/Resource Conservation and Recovery Act (HWMA/RCRA) closure of soils that may have been contaminated by releases from drain line PLA-100115, located within the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The requirements to address the closure of soils contaminated by a potential release from this line in a characterization plan was identified in the "HWMA/RCRA Less Than 90-day Generator Closure Report for the VES-SFE-126."

D. Shanklin

2006-05-24T23:59:59.000Z

104

Cryogenic support member  

DOE Patents [OSTI]

A cryogenic support member is comprised of a non-metallic rod having a depression in at least one end and a metallic end connection assembled to the rod. The metallic end connection comprises a metallic plug which conforms to the shape and is disposed in the depression and a metallic sleeve is disposed over the rod and plug. The plug and the sleeve are shrink-fitted to the depression in the rod to form a connection good in compression, tension and bending.

Niemann, Ralph C. (Downers Grove, IL); Gonczy, John D. (Oak Lawn, IL); Nicol, Thomas H. (Aurora, IL)

1987-01-01T23:59:59.000Z

105

Appendix G Supporting Documentation  

Office of Legacy Management (LM)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarlyEnergyDepartment ofDepartment ofofOxford SiteToledo SiteTonawanda North Site ThisSupporting

106

Electrical transmission line diametrical retainer  

DOE Patents [OSTI]

The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within down hole components. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to with stand the tension and compression of drill pipe during routine drilling cycles.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Sneddon, Cameron (Provo, UT); Briscoe, Michael (Lehi, UT); Fox, Joe (Spanish Fork, UT)

2004-12-14T23:59:59.000Z

107

Pulse shaping with transmission lines  

DOE Patents [OSTI]

A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

Wilcox, Russell B. (Oakland, CA)

1987-01-01T23:59:59.000Z

108

Pulse shaping with transmission lines  

DOE Patents [OSTI]

A method and apparatus for forming shaped voltage pulses uses passive reflection from a transmission line with nonuniform impedance. The impedance of the reflecting line varies with length in accordance with the desired pulse shape. A high voltage input pulse is transmitted to the reflecting line. A reflected pulse is produced having the desired shape and is transmitted by pulse removal means to a load. Light activated photoconductive switches made of silicon can be utilized. The pulse shaper can be used to drive a Pockels cell to produce shaped optical pulses.

Wilcox, R.B.

1985-08-15T23:59:59.000Z

109

Pressurizer tank upper support  

DOE Patents [OSTI]

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90.degree. intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure.

Baker, Tod H. (O'Hara Township, Allegheny County, PA); Ott, Howard L. (Kiski Township, Armstrong County, PA)

1994-01-01T23:59:59.000Z

110

Pressurizer tank upper support  

DOE Patents [OSTI]

A pressurizer tank in a pressurized water nuclear reactor is mounted between structural walls of the reactor on a substructure of the reactor, the tank extending upwardly from the substructure. For bearing lateral loads such as seismic shocks, a girder substantially encircles the pressurizer tank at a space above the substructure and is coupled to the structural walls via opposed sway struts. Each sway strut is attached at one end to the girder and at an opposite end to one of the structural walls, and the sway struts are oriented substantially horizontally in pairs aligned substantially along tangents to the wall of the circular tank. Preferably, eight sway struts attach to the girder at 90[degree] intervals. A compartment encloses the pressurizer tank and forms the structural wall. The sway struts attach to corners of the compartment for maximum stiffness and load bearing capacity. A valve support frame carrying the relief/discharge piping and valves of an automatic depressurization arrangement is fixed to the girder, whereby lateral loads on the relief/discharge piping are coupled directly to the compartment rather than through any portion of the pressurizer tank. Thermal insulation for the valve support frame prevents thermal loading of the piping and valves. The girder is shimmed to define a gap for reducing thermal transfer, and the girder is free to move vertically relative to the compartment walls, for accommodating dimensional variation of the pressurizer tank with changes in temperature and pressure. 10 figures.

Baker, T.H.; Ott, H.L.

1994-01-11T23:59:59.000Z

111

Insulation spacer eliminates electric shorts between lines  

SciTech Connect (OSTI)

The design criteria incorporated into the pipeline insulating spacer were: spacer material selected must have a very large compressive and tensile strength in order to withstand the weight and stress resulting on the pipelines; provide the necessary abrasive resistance, dielectric strength, and will not decay underground; must not soften with heat when used around or near stream lines or will not cold flow under pressure; minimum length and circumference to reduce ''Shielding Effects'' from any cathodic protection system; and provide a material that incorporates a maximum strength at a minimum thickness. Explains that electric shorts are caused by 2 or more metallic structures in contact with each other. Notes that the insulating spacer's use has been expanded to provide electrical and physical insulation between carrier pipe and casing, supports for piping in compressing stations, and for pipelines that are suspended on bridges.

Colaizzi, J.F.; Rockafellow, G.B.

1983-03-01T23:59:59.000Z

112

The Design Complexity of Program Undo Support in a General-Purpose Processor  

E-Print Network [OSTI]

of hardware overhead, rough develop- ment time, and lines of code; and Section 4 concludes. 2 ImplementationThe Design Complexity of Program Undo Support in a General-Purpose Processor Radu Teodorescu on collision-free syn- chronization [7, 10], speculation on the values of in- validated cache lines [5

Torrellas, Josep

113

Center for Civic Engagement -Fact Sheet #21 Support/Advocacy Groups including Mental Health  

E-Print Network [OSTI]

, a 24 Hour Help line, a shepherding home, post abortion counseling, healing support groups, parenting from unfortunate family circumstances. The help line is 777-HELP (or 777-4357) for emotional problems working to increase community awareness of this pervasive problem. The primary focus of the shelter

Suzuki, Masatsugu

114

Authorization of Line Extension (Nebraska)  

Broader source: Energy.gov [DOE]

Any entity permitted to establish an electric light and power plant, and/or transmission or distribution lines within a city, village, or public electric light and power district, may also extend...

115

Reactor vessel support system. [LMFBR  

DOE Patents [OSTI]

A reactor vessel support system includes a support ring at the reactor top supported through a box ring on a ledge of the reactor containment. The box ring includes an annular space in the center of its cross-section to reduce heat flow and is keyed to the support ledge to transmit seismic forces from the reactor vessel to the containment structure. A coolant channel is provided at the outside circumference of the support ring to supply coolant gas through the keyways to channels between the reactor vessel and support ledge into the containment space.

Golden, M.P.; Holley, J.C.

1980-05-09T23:59:59.000Z

116

Analysis of interconnect microstrip lines  

E-Print Network [OSTI]

of the return loss of the slot-coupled microstrip dipole. Section C presents two simulations of the return loss on the slot- coupled rectangular patch antenna. A. Interconnect of Microstrip Lines Several circuits with the geometry of Figure 1 were fabricated.... Experimental and Theoretical Results of the Interconnect Two circuits were designed and fabricated. Each circuit consists of two substrates as shown in Figure 9. One substrate has an open microstrip line etched in one side and an aperture etched...

Luong, Giam-Minh

1992-01-01T23:59:59.000Z

117

Fin-line horn antenna  

DOE Patents [OSTI]

A fin line circuit card containing a fin line slot feeds a dipole antenna ich extends a quarterwave outside the waveguide and provides an energy beam focal point at or near the open end of the waveguide. The dipole antenna thus maintains a wide and nearly constant beamwidth, low VSWR and a circular symmetric radiation pattern for use in electronic warfare direction finding and surveillance applications.

Reindel, John (San Diego, CA)

1990-01-01T23:59:59.000Z

118

Support and maneuvering device  

DOE Patents [OSTI]

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

Wood, R.L.

1987-03-23T23:59:59.000Z

119

Thermionic converter emitter support arrangement  

SciTech Connect (OSTI)

A support is presented for use in a thermionic converted to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a large metal main support at the rear end that is attached to the housing, and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

Allen, D.T.

1990-10-16T23:59:59.000Z

120

Thermionic converter emitter support arrangement  

SciTech Connect (OSTI)

A support is provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housing, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

Allen, Daniel T. (La Jolla, CA)

1990-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Thermionic converter emitter support arrangement  

DOE Patents [OSTI]

A support is provided for use in a thermionic converter to support an end an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially at its temperatures changes. The emitter end (34) is supported by a spring structure (44) that includes a pair of Belleville springs, and the spring structure is supported by a support structure (42) fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element (74) at the front end, a larger metal main support (76) at the rear end that is attached to the housng, and with a ceramic layer (80) between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer (120) captured between the Belleville springs.

Allen, Daniel T. (La Jolla, CA)

1990-01-01T23:59:59.000Z

122

Thermionic converter emitter support arrangement  

SciTech Connect (OSTI)

This patent describes a support provided for use in a therminonic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs.

Allen, D.T.

1990-05-22T23:59:59.000Z

123

Thermionic converter emitter support arrangement  

SciTech Connect (OSTI)

This document discusses a support provided for use in a thermionic converter to support an end of an emitter to keep it out of contact with a surrounding collector while allowing the emitter end to move axially as its temperature changes. The emitter end is supported by a spring structure that includes a pair of Belleville springs, and the spring structure is supported by a support structure fixed to the housing that includes the collector. The support structure is in the form of a sandwich with a small metal spring-engaging element at the front end, a larger metal main support at the rear end that is attached to the housing, and with a ceramic layer between them that is bonded by hot isostatic pressing to the metal element and metal main support. The spring structure can include a loose wafer captured between the Belleville springs. 7 figs.

Allen, D.T.

1989-07-06T23:59:59.000Z

124

Process of making supported catalyst  

DOE Patents [OSTI]

Oxide supported metal catalysts have an additional metal present in intimate association with the metal catalyst to enhance catalytic activity. In a preferred mode, iridium or another Group VIII metal catalyst is supported on a titania, alumina, tungsten oxide, silica, or composite oxide support. Aluminum ions are readsorbed onto the support and catalyst, and reduced during calcination. The aluminum can be added as aluminum nitrate to the iridium impregnate solution, e.g. chloroiridic acid.

Schwarz, James A. (Fayetteville, NY); Subramanian, Somasundaram (Melvindale, MI)

1992-01-01T23:59:59.000Z

125

Florida Electric Transmission Line Siting Act (Florida)  

Broader source: Energy.gov [DOE]

The Transmission Line Siting Act (TLSA) is the states centralized process for licensing electrical transmission lines which; (a) are 230 kV or larger; (b) cross a county line; and, (c) are 15...

126

REVIEWING PERFORMANCE ASSESSMENTS SUPPORTING  

E-Print Network [OSTI]

Purpose: To summarize current NRC policy and guidance, which should assist in making informed decisions regarding land disposal of unique low-level radioactive waste streams, including disposal of significant quantities of depleted uranium until a new regulation is implemented. Background: In September 2009, NRC staff conducted two public workshops soliciting early public input on major issues associated with a potential rulemaking for land disposal of unique waste streams including, but not limited to, significant quantities of depleted uranium. During these workshops, a number of stakeholders expressed interest or concern with the review of performance assessments supporting land disposal of unique waste streams prior to completion of the rulemaking process. Discussion: The enclosure contains a summary of existing guidance for reviewing performance assessments with a focus on issues associated with the safe disposal of unique waste streams. NRC staff is providing this guidance to the Agreement States for their information, and for distribution to their licensees, as appropriate. If you have any questions regarding this correspondence, please contact me at 301-415-3340 or the individuals named below.

Robert J. Lewis

2010-01-01T23:59:59.000Z

127

What can emission lines tell us?  

E-Print Network [OSTI]

1 Generalities 2 Empirical diagnostics based on emission lines 3 Photoionization modelling 4 Pending questions 5 Appendix: Lists of useful lines and how to deal with them

G. Stasinska

2007-04-03T23:59:59.000Z

128

Objective determination of optimal power line designs.  

E-Print Network [OSTI]

??Includes abstract. The thesis investigated the possibility of overhead power line designs being decided by using an objective rather thana subjective method. Power lines are (more)

Stephen, Robert G.

2010-01-01T23:59:59.000Z

129

Quasistellar Objects: Intervening Absorption Lines  

E-Print Network [OSTI]

We briefly review, at a level appropriate for graduate students and non-specialists, the field of quasar absorption lines (QALs). Emphasis is on the intervening absorbers. We present the anatomy of a quasar spectrum due to various classes of intervening absorption systems, and a brief historical review of each absorber class (Lyman-alpha forest and Lyman limit systems, and metal-line and damped Lyman-alpha absorbers). We also provide several heuristic examples on how the physical properties of both the intergalactic medium and the gaseous environments associated with earlier epoch galaxies can be inferred from QALs. The evolution of these environments from z=4 are discussed.

Jane C. Charlton; Christopher W. Churchill

2000-05-31T23:59:59.000Z

130

DOE Selects Mission Support Alliance, LLC for Mission Support...  

Energy Savers [EERE]

The Tank Operations Contract-awarded in May 2008-includes base operations of the tanks, analytical laboratory support, single-shell tank retrieval and closure, Waste...

131

Coiled transmission line pulse generators  

DOE Patents [OSTI]

Methods and apparatus are provided for fabricating and constructing solid dielectric "Coiled Transmission Line" pulse generators in radial or axial coiled geometries. The pour and cure fabrication process enables a wide variety of geometries and form factors. The volume between the conductors is filled with liquid blends of monomers, polymers, oligomers, and/or cross-linkers and dielectric powders; and then cured to form high field strength and high dielectric constant solid dielectric transmission lines that intrinsically produce ideal rectangular high voltage pulses when charged and switched into matched impedance loads. Voltage levels may be increased by Marx and/or Blumlein principles incorporating spark gap or, preferentially, solid state switches (such as optically triggered thyristors) which produce reliable, high repetition rate operation. Moreover, these Marxed pulse generators can be DC charged and do not require additional pulse forming circuitry, pulse forming lines, transformers, or an a high voltage spark gap output switch. The apparatus accommodates a wide range of voltages, impedances, pulse durations, pulse repetition rates, and duty cycles. The resulting mobile or flight platform friendly cylindrical geometric configuration is much more compact, light-weight, and robust than conventional linear geometries, or pulse generators constructed from conventional components. Installing additional circuitry may accommodate optional pulse shape improvements. The Coiled Transmission Lines can also be connected in parallel to decrease the impedance, or in series to increase the pulse length.

McDonald, Kenneth Fox (Columbia, MO)

2010-11-09T23:59:59.000Z

132

ASME Code Efforts Supporting HTGRs  

SciTech Connect (OSTI)

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

D.K. Morton

2011-09-01T23:59:59.000Z

133

ASME Code Efforts Supporting HTGRs  

SciTech Connect (OSTI)

In 1999, an international collaborative initiative for the development of advanced (Generation IV) reactors was started. The idea behind this effort was to bring nuclear energy closer to the needs of sustainability, to increase proliferation resistance, and to support concepts able to produce energy (both electricity and process heat) at competitive costs. The U.S. Department of Energy has supported this effort by pursuing the development of the Next Generation Nuclear Plant, a high temperature gas-cooled reactor. This support has included research and development of pertinent data, initial regulatory discussions, and engineering support of various codes and standards development. This report discusses the various applicable American Society of Mechanical Engineers (ASME) codes and standards that are being developed to support these high temperature gascooled reactors during construction and operation. ASME is aggressively pursuing these codes and standards to support an international effort to build the next generation of advanced reactors so that all can benefit.

D.K. Morton

2012-09-01T23:59:59.000Z

134

Supported liquid membrane electrochemical separators  

DOE Patents [OSTI]

Supported liquid membrane separators improve the flexibility, efficiency and service life of electrochemical cells for a variety of applications. In the field of electrochemical storage, an alkaline secondary battery with improved service life is described in which a supported liquid membrane is interposed between the positive and negative electrodes. The supported liquid membranes of this invention can be used in energy production and storage systems, electrosynthesis systems, and in systems for the electrowinning and electrorefining of metals.

Pemsler, J. Paul (Lexington, MA); Dempsey, Michael D. (Revere, MA)

1986-01-01T23:59:59.000Z

135

Results from Prior NSF support  

E-Print Network [OSTI]

So far most of projects in the proposal have been completed or ... the project description of previous NSF support unless otherwise stated. ..... in the end of [

2011-09-25T23:59:59.000Z

136

ORISE: Training and Technology Support  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Training and Technology Support ORISE helps train all levels of government personnel for natural disasters and man-made emergencies using latest technology The Oak Ridge Institute...

137

Say hello to academic support.  

E-Print Network [OSTI]

Say hello to academic support. Metro Academies small community for two years 70Students learn together in a Say hello to... Academic support Metro Academies (Metro) helps first-generation, low: metro.sfsu.edu Say hello to someone who can answer your questions. Metro Academies Phone 415

138

The MICE Muon Beam Line  

SciTech Connect (OSTI)

In the Muon Ionization Cooling Experiment (MICE) at RAL, muons are produced and transported in a dedicated beam line connecting the production point (target) to the cooling channel. We discuss the main features of the beamline, meant to provide muons with momenta between 140 MeV/c and 240 MeV/c and emittances up to 10 mm rad, which is accomplished by means of a diffuser. Matching procedures to the MICE cooling channel are also described. In summer 2010 we performed an intense data taking campaign to finalize the calibration of the MICE Particle Identification (PID) detectors and the understanding of the beam line, which completes the STEPI phase of MICE. We highlight the main results from these data.

Apollonio, Marco [High Energy Physics Group, Department of Physics, Imperial College London SW7 2AZ (United Kingdom)

2011-10-06T23:59:59.000Z

139

Thermally stable nanoparticles on supports  

DOE Patents [OSTI]

An inverse micelle-based method for forming nanoparticles on supports includes dissolving a polymeric material in a solvent to provide a micelle solution. A nanoparticle source is dissolved in the micelle solution. A plurality of micelles having a nanoparticle in their core and an outer polymeric coating layer are formed in the micelle solution. The micelles are applied to a support. The polymeric coating layer is then removed from the micelles to expose the nanoparticles. A supported catalyst includes a nanocrystalline powder, thin film, or single crystal support. Metal nanoparticles having a median size from 0.5 nm to 25 nm, a size distribution having a standard deviation .ltoreq.0.1 of their median size are on or embedded in the support. The plurality of metal nanoparticles are dispersed and in a periodic arrangement. The metal nanoparticles maintain their periodic arrangement and size distribution following heat treatments of at least 1,000.degree. C.

Roldan Cuenya, Beatriz; Naitabdi, Ahmed R.; Behafarid, Farzad

2012-11-13T23:59:59.000Z

140

Reading between the lines : blueprints for a worker support infrastructure in the peer economy  

E-Print Network [OSTI]

Look around you. What unassuming skills or assets are just bursting with potential? Meet the peer economy, where people monetize skills and assets they already have using online, peer-to-peer marketplaces. Lyft, Shapeways, ...

Cheng, Denise Fung

2014-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Energy Ambassadors to Provide Front Line Support for Alaska Native Villages  

Energy Savers [EERE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Office of Inspector General Office of Audit| Department ofNon-Road Engines,EmployeeEnergyEnergy 101: WindAgency|

142

Technology Support Strategic Plan MISSION STATEMENT  

E-Print Network [OSTI]

1 Technology Support Strategic Plan MISSION STATEMENT Through collaboration and professionalism, the Technology Support Department provides the highest possible quality Information Technology (IT) services, support, and assistance to the University community. VISION STATEMENT Technology Support

Westfall, Peter H.

143

Highly durable graphene nanoplatelets supported Pt nanocatalysts...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction . Highly durable graphene nanoplatelets supported Pt nanocatalysts for oxygen reduction . Abstract:...

144

Data triage enables extreme-scale August 1, 2014  

E-Print Network [OSTI]

Office of Science Advanced Scientific Computing Research (ASCR) and NNSA Advanced Simulation. Operated by Los Alamos National Security, LLC for the Department of Energy's NNSA #12;

145

THE RABIT: A RAPID AUTOMATED BIODOSIMETRY TOOL FOR RADIOLOGICAL TRIAGE  

E-Print Network [OSTI]

. Health Phys. 98(2):209­217; 2010 Key words: biological indicators; dosimetry; blood; cytogenetics-priority need in an environment of heightened concern over possible radiological or nuclear terrorist attacks of radiological injuries. A small improvised nuclear device (IND) would produce a major health emergency

146

Balancing human and system visualization during document triage  

E-Print Network [OSTI]

in concert: a search engine interface presents lists of potentially relevant documents; a document reader displays their content; and a text editor or a more specialized application records notes and assessments. However, people often become disoriented while...

Bae, Soon Il

2009-05-15T23:59:59.000Z

147

Municipal Support of Projects (Iowa)  

Broader source: Energy.gov [DOE]

Municipalities may choose to support projects, such as those which will generate electricity through the use of a renewable energy source, by tax-exempt bond financing; easements for roads, water...

148

Supported molten-metal catalysts  

DOE Patents [OSTI]

An entirely new class of catalysts called supported molten-metal catalysts, SMMC, which can replace some of the existing precious metal catalysts used in the production of fuels, commodity chemicals, and fine chemicals, as well as in combating pollution. SMMC are based on supporting ultra-thin films or micro-droplets of the relatively low-melting (<600.degree. C.), inexpensive, and abundant metals and semimetals from groups 1, 12, 13, 14, 15 and 16, of the periodic table, or their alloys and intermetallic compounds, on porous refractory supports, much like supported microcrystallites of the traditional solid metal catalysts. It thus provides orders of magnitude higher surface area than is obtainable in conventional reactors containing molten metals in pool form and also avoids corrosion. These have so far been the chief stumbling blocks in the application of molten metal catalysts.

Datta, Ravindra (Iowa City, IA); Singh, Ajeet (Iowa City, IA); Halasz, Istvan (Iowa City, IA); Serban, Manuela (Iowa City, IA)

2001-01-01T23:59:59.000Z

149

POLICIES TO SUPPORT COMMUNITY SOLAR  

E-Print Network [OSTI]

POLICIES TO SUPPORT COMMUNITY SOLAR INITIATIVES: BEST PRACTICES TO ENHANCE NET METERING FINAL TO ENHANCE NET METERING Final Report A Renewable Energy Applications for Delaware Yearly (READY) Project and Distributed Benefits ....................................................... 7 2.2.4 Potential of the Smart

Delaware, University of

150

DOE: Support Implementation of EEOICPA  

Broader source: Energy.gov [DOE]

DOEs primary role in the EEOICPA is to provide records to DOL, NIOSH and DOJ, to support claim processing, dose reconstruction and ultimately claim adjudication. The worker records provided by...

151

Labor Support Survey Summary Report  

E-Print Network [OSTI]

One of the main cost drivers in the defense aerospace industry is overhead personnel. Traditionally, labor support ratios have been used as an efficiency measure and to control overhead levels. This report outlines the ...

Klein, Janice

152

Operations and Maintenance Management Support  

Broader source: Energy.gov [DOE]

Federal operations and maintenance (O&M) programs must gain full support from management to succeed. Management understanding and buying into the program elevates O&M importance and allows...

153

Collateral Support Program (New Mexico)  

Broader source: Energy.gov [DOE]

The New Mexico Finance Authority has been approved to administer a $13.2 million Small Business Collateral Support Participation Program. The funds are dedicated to help finance credit worthy...

154

Sustainable Operations & Maintenance Implementation Support  

E-Print Network [OSTI]

, and purchasing policy: Energy efficiency cannot exist without accountability and organizational support energy efficiency in buildings. Organizational innovation for energy conservation; Organizations face of energy efficiency. Meetings with facilities personnel, maintenance staff, building managers, building oc

155

Photocatalytic reactor with flexible supports  

DOE Patents [OSTI]

Organic pollutants and bioaerosols in a gaseous stream are oxidized by exposure to light (e.g., UV light) in the presence of semiconductor catalyst particles or coatings supported on flexible strips suspended in the gaseous stream. 3 figs.

Jacoby, W.A.; Blake, D.M.

1995-09-12T23:59:59.000Z

156

Mud return line connector apparatus  

SciTech Connect (OSTI)

The preferred and illustrated embodiment is a connector adapted to be joined above a blowout preventer and below the rotary table of a drilling rig. It collects the annular flow of returned drilling mud and directs mud to an incorporated, radially directed connective nipple. It enables the blowout preventer to be adjusted in location relative to the drilling rig and further accommodates a variable level of drilling mud in the annular space. The radial nipple connects with a mud line extending at some radial direction with a slope causing the mud to flow by gravity from the annular space to remote located mud tanks.

Ward, B.N.

1981-07-07T23:59:59.000Z

157

Chromospheric Dynamics and Line Formation  

E-Print Network [OSTI]

The solar chromosphere is very dynamic, due to the presence of large amplitude hydrodynamic waves. Their propagation is affected by NLTE radiative transport in strong spectral lines, which can in turn be used to diagnose the dynamics of the chromosphere. We give a basic introduction into the equations of NLTE radiation hydrodynamics and describe how they are solved in current numerical simulations. The comparison with observation shows that one-dimensional codes can describe strong brightenings quite well, but the overall chromospheric dynamics appears to be governed by three-dimensional shock propagation.

R. Hammer; P. Ulmschneider

2007-07-14T23:59:59.000Z

158

SPEAR3 Beam Line Availability  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security Administration the1 -the Mid-Infrared0 ResourceAwards SAGE Awards ,#2446Smalln n u a l rBeam Line

159

Supporting biosurveillance via the web  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline Gallium OxideSuminDepositionSupplierSupportingSupporting

160

Capillary electrophoresis-fluorescence line narrowing system (CE-FLNS) for on-line structural characterization  

DOE Patents [OSTI]

Capillary electrophoresis (CE) is interfaced with low temperature fluorescence line-narrowing (FLN) spectroscopy for on-line structural characterization of separated molecular analytes. 21 figs.

Jankowiak, R.J.; Small, G.J.; Shields, P.A.

1999-04-27T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

Particle trap with dielectric barrier for use in gas insulated transmission lines  

DOE Patents [OSTI]

A gas-insulated transmission line includes an outer sheath, an inner conductor within the outer sheath, insulating supports supporting the inner conductor within the outer sheath, and an insulating gas electrically insulating the inner conductor from the outer sheath. An apertured particle trapping electrode is disposed within the outer sheath, and the electrode has a pair of dielectric members secured at each longitudinal end thereof, with the dielectric members extending outwardly from the apertured electrode.

Dale, Steinar J. (Monroeville, PA)

1982-01-01T23:59:59.000Z

162

Particle trap with dielectric barrier for use in gas insulated transmission lines  

DOE Patents [OSTI]

A gas-insulated transmission line includes an outer sheath, an inner conductor within the outer sheath, insulating supports supporting the inner conductor within the outer sheath, and an insulating gas electrically insulating the inner conductor from the outer sheath. An apertured particle trapping electrode is disposed within the outer sheath, and the electrode has a pair of dielectric members secured at each longitudinal end thereof, with the dielectric members extending outwardly from the apertured electrode. 7 figs.

Dale, S.J.

1982-06-15T23:59:59.000Z

163

Line Management Perspective: National Nuclear Security Administration...  

Broader source: Energy.gov (indexed) [DOE]

National Nuclear Security Administration (NNSA) Line Management Perspective: National Nuclear Security Administration (NNSA) Addthis Description Slide Presentation by Jim...

164

Title Line 2 Commercialization at the  

E-Print Network [OSTI]

-exclusive or exclusive license (royalty free or royalty bearing) ­ Researchers sign acknowledgment #12;Title Title Line 2

Czarnecki, Krzysztof

165

Refractory Lining Material Improves Gasifer Performance  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

water GASIFICATION CHAMBER the ENERGY lab NATIONAL ENERGY TECHNOLOGY LABORATORY Technology Transfer Refractory Lining Material Improves Gasifier Performance Award Winning...

166

Methods of Using Existing Wire Lines (power lines, phone lines, internet lines) for Totally Secure Classical Communication Utilizing Kirchoff's Law and Johnson-like Noise  

E-Print Network [OSTI]

We outline some general solutions to use already existing and currently used wire lines, such as power lines, phone lines, internet lines, etc, for the unconditionally secure communication method based on Kirchoff's Law and Johnson-like Noise (KLJN). Two different methods are shown. One is based on filters used at single wires and the other one utilizes a common mode voltage superimposed on a three-phase powerline.

Laszlo B. Kish

2006-10-02T23:59:59.000Z

167

Uranium Neutron Coincidence Collar Model Utilizing Boron-10 Lined Tubes  

SciTech Connect (OSTI)

The Department of Energy Office of Nuclear Safeguards and Security (NA-241) is supporting the project Coincidence Counting With Boron-Based Alternative Neutron Detection Technology at Pacific Northwest National Laboratory (PNNL) for the development of a 3He proportional counter alternative neutron coincidence counter. The goal of this project is to design, build and demonstrate a system based upon 10B-lined proportional tubes in a configuration typical for 3He-based coincidence counter applications. This report, providing results for model development of Alternative Boron-Based Uranium Neutron Coincidence Collar (ABUNCL) designs, is a deliverable under Task 2 of the project.

Rogers, Jeremy L.; Ely, James H.; Kouzes, Richard T.; Lintereur, Azaree T.; Siciliano, Edward R.

2012-09-18T23:59:59.000Z

168

Support  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline Gallium OxideSuminDepositionSupplier Toolbox1,033 15 6781,181

169

Unsplit bipolar pulse forming line  

DOE Patents [OSTI]

A bipolar pulse forming transmission line module and system for linear induction accelerators having first, second, third, and fourth planar conductors which form a sequentially arranged interleaved stack having opposing first and second ends, with dielectric layers between the conductors. The first and second planar conductors are connected to each other at the first end, and the first and fourth planar conductors are connected to each other at the second end via a shorting plate. The third planar conductor is electrically connectable to a high voltage source, and an internal switch functions to short at the first end a high voltage from the third planar conductor to the fourth planar conductor to produce a bipolar pulse at the acceleration axis with a zero net time integral. Improved access to the switch is enabled by an aperture through the shorting plate and the proximity of the aperture to the switch.

Rhodes, Mark A. (Pleasanton, CA)

2011-05-24T23:59:59.000Z

170

Superconducting transmission line particle detector  

DOE Patents [OSTI]

A microvertex particle detector for use in a high energy physic collider including a plurality of parallel superconducting thin film strips separated from a superconducting ground plane by an insulating layer to form a plurality of superconducting waveguides. The microvertex particle detector indicates passage of a charged subatomic particle by measuring a voltage pulse measured across a superconducting waveguide caused by the transition of the superconducting thin film strip from a superconducting to a non- superconducting state in response to the passage of a charged particle. A plurality of superconducting thin film strips in two orthogonal planes plus the slow electromagnetic wave propagating in a superconducting transmission line are used to resolve N/sup 2/ ambiguity of charged particle events. 6 figs.

Gray, K.E.

1988-07-28T23:59:59.000Z

171

Gamma-Ray Burst Lines  

E-Print Network [OSTI]

The evidence for spectral features in gamma-ray bursts is summarized. As a guide for evaluating the evidence, the properties of gamma-ray detectors and the methods of analyzing gamma-ray spectra are reviewed. In the 1980's, observations indicated that absorption features below 100 keV were present in a large fraction of bright gamma-ray bursts. There were also reports of emission features around 400 keV. During the 1990's the situation has become much less clear. A small fraction of bursts observed with BATSE have statistically significant low-energy features, but the reality of the features is suspect because in several cases the data of the BATSE detectors appear to be inconsistent. Furthermore, most of the possible features appear in emission rather than the expected absorption. Analysis of data from other instruments has either not been finalized or has not detected lines.

Michael S. Briggs

1999-10-20T23:59:59.000Z

172

Superconducting transmission line particle detector  

DOE Patents [OSTI]

A microvertex particle detector for use in a high energy physic collider including a plurality of parallel superconducting thin film strips separated from a superconducting ground plane by an insulating layer to form a plurality of superconducting waveguides. The microvertex particle detector indicates passage of a charged subatomic particle by measuring a voltage pulse measured across a superconducting waveguide caused by the transition of the superconducting thin film strip from a superconducting to a non-superconducting state in response to the passage of a charged particle. A plurality of superconducting thin film strips in two orthogonal planes plus the slow electromagnetic wave propogating in a superconducting transmission line are used to resolve N.sup.2 ambiguity of charged particle events.

Gray, Kenneth E. (Naperville, IL)

1989-01-01T23:59:59.000Z

173

Supporting Multiple Cognitive Processing Styles Using Tailored Support Systems  

SciTech Connect (OSTI)

According to theories of cognitive processing style or cognitive control mode, human performance is more effective when an individuals cognitive state (e.g., intuition/scramble vs. deliberate/strategic) matches his/her ecological constraints or context (e.g., utilize intuition to strive for a "good-enough" response instead of deliberating for the "best" response under high time pressure). Ill-mapping between cognitive state and ecological constraints are believed to lead to degraded task performance. Consequently, incorporating support systems which are designed to specifically address multiple cognitive and functional states e.g., high workload, stress, boredom, and initiate appropriate mitigation strategies (e.g., reduce information load) is essential to reduce plant risk. Utilizing the concept of Cognitive Control Models, this paper will discuss the importance of tailoring support systems to match an operator's cognitive state, and will further discuss the importance of these ecological constraints in selecting and implementing mitigation strategies for safe and effective system performance. An example from the nuclear power plant industry illustrating how a support system might be tailored to support different cognitive states is included.

Tuan Q. Tran; Karen M. Feigh; Amy R. Pritchett

2007-08-01T23:59:59.000Z

174

Addressing Domain Evolution Challenges in Model-Driven Software Product-line Architectures  

E-Print Network [OSTI]

Software Engineering Department Siemens Corporate Research Princeton, NJ 08540, USA lenz.gunther@siemens study that shows how a layered architecture and model-to-model transformation tool support can re- duce Transformation 1. Introduction Software product-line architectures (PLAs) [20] are a promising technology

Schmidt, Douglas C.

175

High-Speed Imaging of Freezing Drops: Still No Preference for the Contact Line  

E-Print Network [OSTI]

, Michigan Technological University, Houghton, Michigan 49931, United States *S Supporting Information regarding a preferred status of the triple line between water, air, and an ice-catalyzing substrate geometry. INTRODUCTION Heterogeneous nucleation in clouds converts water to ice, thereby affecting weather

Kostinski, Alex

176

Pressure vessel sliding support unit and system using the sliding support unit  

DOE Patents [OSTI]

Provided is a sliding support and a system using the sliding support unit. The sliding support unit may include a fulcrum capture configured to attach to a support flange, a fulcrum support configured to attach to the fulcrum capture, and a baseplate block configured to support the fulcrum support. The system using the sliding support unit may include a pressure vessel, a pedestal bracket, and a plurality of sliding support units.

Breach, Michael R.; Keck, David J.; Deaver, Gerald A.

2013-01-15T23:59:59.000Z

177

Thermal Properties of Starch From New Corn Lines as Impacted by Environment and During Line Development  

SciTech Connect (OSTI)

The objectives of this research were to further characterize exotic by adapted corn inbreds by studying the impact of environment on their starch thermal properties, and investigating the development of starch thermal properties during kernel maturation by using differential scanning calorimetry (DSC). A method to expedite identification of unusual starch thermal traits was investigated by examining five corn kernels at a time, instead of one kernel, which the previous screening methods used. Corn lines with known thermal functions were blended with background starch (control) in ratios of unique starch to control starch, and analyzed by using DSC. Control starch was representative of typical corn starch. The values for each ratio within a mutant type were unique ({alpha} < 0.01) for most DSC measurements. These results supported the five-kernel method for rapidly screening large amounts of corn germplasm to identify unusual starch traits. The effects of 5 growing locations on starch thermal properties from exotic by adapted corn and Corn Belt lines were studied using DSC. The warmest location, Missouri, generally produced starch with greater gelatinization onset temperature (T{sub oG}), narrower range of gelatinization (R{sub G}), and greater enthalpy of gelatinization ({Delta}H{sub G}). The coolest location, Illinois, generally resulted in starch with lower T{sub oG}, wider R{sub G}, and lower {Delta}H{sub G}. Starch from the Ames 1 farm had thermal properties similar to those of Illinois, whereas starch from the Ames 2 farm had thermal properties similar to those of Missouri. The temperature at Ames 2 may have been warmer since it was located near a river; however, soil type and quality also were different. Final corn starch structure and function change during development and maturity. Thus, the changes in starch thermal properties during 5 stages of endosperm development from exotic by adapted corn and Corn Belt lines at two locations were studied by using DSC. The T{sub oG} tended to decrease during maturation of the kernel, whereas the {Delta}H{sub G} tended not to change. Retrogradation parameters did not vary greatly among days after pollination (DAP) and between locations. Genotypes were affected differently by environments and significant interactions were found between genotype, environment,and DAP.

Elizabeth M. Lenihan

2003-12-12T23:59:59.000Z

178

Policies supporting Heat Pump Technologies  

E-Print Network [OSTI]

Policies supporting Heat Pump Technologies in Canada IEA Heat Pump Workshop London, UK November 13 in the world, with an average of 16,995 kilowatt-hours per annum. #12;Canada's Context for Heat Pumps Impacts avenues: Ground source heat pumps for cold climates (heating and cooling) Reversible air source heat

Oak Ridge National Laboratory

179

Decision Support and Risk Management  

E-Print Network [OSTI]

and emergency management officials during the planning, incident management preparedness, and response phasesDecision Support and Risk Management CVMDM: Community Vaccination and Mass Dispensing Model What and the performance of prophylaxis supply logistics and PODs. Decision and Information Sciences Division Decision

180

Supporting Information Materials and Methods  

E-Print Network [OSTI]

1 Supporting Information Materials and Methods Description of Energy-Recycling Artificial Foot The energy-recycling artificial foot was comprised of six component groups: the attachment interface, the toe The prosthesis simulator boot weighed 1.30 kg, and the lift shoe weighed 1.42 kg, with each adding approximately

Collins, Steven H.

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Oscillation-supported Information Processing  

E-Print Network [OSTI]

, intrinsic currents of neurons, dendritic Ca2+ spikes, and other voltage-dependent membrane oscillations7 Oscillation-supported Information Processing and Transfer at the Hippocampusected by macroscopic oscillations. In each oscillatory cycle, recruitment of principal neurons is temporally protracted

Diba, Kamran

182

Decision Support and Risk Management  

E-Print Network [OSTI]

and Information Sciences Division Decision Support and Risk Management Group #12;A U.S. Department of Energy to analyze many failure scenarios over the past 5 years. Restore's data library of applications was developed infrastructures. A new user with as little as 4­6 hours of training can use the tool to modify an existing data

183

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprising high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure.

Nowobilski, Jeffert J. (Orchard Park, NY); Owens, William J. (Kenmore, NY)

1985-01-01T23:59:59.000Z

184

Peg supported thermal insulation panel  

DOE Patents [OSTI]

A thermal insulation panel which is lightweight, load bearing, accommodates thermal stress, and has excellent high temperature insulation capability comprises high performance insulation between thin metal walls supported by high density, high strength glass pegs made in compliance with specified conditions of time, temperature and pressure. 2 figs.

Nowobilski, J.J.; Owens, W.J.

1985-04-30T23:59:59.000Z

185

Supporting Blind Photography Chandrika Jayant  

E-Print Network [OSTI]

Supporting Blind Photography Chandrika Jayant , Hanjie Ji , Samuel White , and Jeffrey P. Bigham.ji,swhite,jbigham}@cs.rochester.edu ABSTRACT Blind people want to take photographs for the same reasons as others to record important events technology and human-powered services can be used to give blind people feedback on their environment

Bigham, Jeffrey P.

186

Management of Support Services Activities  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To provide the policy, procedures, and responsibilities for the management of support services contracts with the Department of Energy (DOE). Cancels DOE O 4200.3B dated 10-3-85. Chg 1 dated 3-26-92. Canceled by DOE O 4200.3D dated 8-31-92.

1991-05-17T23:59:59.000Z

187

Smith et al Supporting Information  

E-Print Network [OSTI]

Smith et al 1 Supporting Information for Smith et al. 2006, PLoS Computational Biology 2:e161-hyperpallium apicale; HF-hippocampal formation, and M-mesopallium. #12;Smith et al 2 FigureS2,nolinkswerefoundbetweenelectrodesindifferentbirds,andnolinkswerefoundintothesoundstimulusvariable. CombinedAnalysisofAllBirds'ElectrodesPlusSound #12;Smith et al 3 Analysis of Data from Subsections

Jarvis, Erich D.

188

Supported organoiridium catalysts for alkane dehydrogenation  

DOE Patents [OSTI]

Solid supported organoiridium catalysts, a process for preparing such solid supported organoiridium catalysts, and the use of such solid supported organoiridium catalysts in dehydrogenation reactions of alkanes is provided. The catalysts can be easily recovered and recycled.

Baker, R. Thomas; Sattelberger, Alfred P.; Li, Hongbo

2013-09-03T23:59:59.000Z

189

Mounting support for a photovoltaic module  

DOE Patents [OSTI]

A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

2013-03-26T23:59:59.000Z

190

Sacramento Area Voltage Support Final Environmental Impact Statement  

SciTech Connect (OSTI)

The Western Area Power Administration's Central Valley Project transmission system forms an integral part of the interconnected Sacramento area transmission grid. Western is contractually responsible to oversee that the system is operated in accordance with strict reliability standards. Growth in the greater Sacramento, California area and power imported from generation outside the region, have increased the demand on the interconnected electric transmission system, leading to transmission system overloads and reducing the reliability and security of the area power system. Western has prepared this Sacramento Area Voltage Support (SVS) Draft Environmental Impact Statement (EIS) in compliance with Federal laws, regulations and guidelines, principally the National Environmental Policy Act (NEPA). This Draft EIS evaluates the potential environmental effects of physical improvements to the area's power system. Enhancements are needed to improve system reliability and provide voltage support for the Sacramento area. The results of public scoping meetings, workshops, meetings with agencies, and earlier studies by Western and area utilities helped to develop a range of alternatives for analysis. The Proposed Action involves: (1) Constructing a new double-circuit, 230-kV transmission line paralleling the existing double-circuit, 230-kV line from the O'Banion Substation to the Elverta Substation; (2) Realigning a portion of the existing Cottonwood-Roseville single-circuit, 230-kV transmission line north of Elverta Substation; and (3) Reconductoring the existing double-circuit, 230-kV transmission line from the Elverta Substation to the Tracy Substation. Public Hearings on the Draft EIS will be held between December 9-12, 2002. Comments on this Draft EIS are encouraged and should be sent to Ms. Loreen McMahon (above). Comments must be received by December 30, 2002.

N /A

2003-09-19T23:59:59.000Z

191

Sacramento Area Voltage Support Draft Environmental Impact Statement  

SciTech Connect (OSTI)

The Western Area Power Administration's Central Valley Project transmission system forms an integral part of the interconnected Sacramento area transmission grid. Western is contractually responsible to oversee that the system is operated in accordance with strict reliability standards. Growth in the greater Sacramento, California area and power imported from generation outside the region, have increased the demand on the interconnected electric transmission system, leading to transmission system overloads and reducing the reliability and security of the area power system. Western has prepared this Sacramento Area Voltage Support (SVS) Draft Environmental Impact Statement (EIS) in compliance with Federal laws, regulations and guidelines, principally the ''National Environmental Policy Act'' (NEPA). This Draft EIS evaluates the potential environmental effects of physical improvements to the area's power system. Enhancements are needed to improve system reliability and provide voltage support for the Sacramento area. The results of public scoping meetings, workshops, meetings with agencies, and earlier studies by Western and area utilities helped to develop a range of alternatives for analysis. The Proposed Action involves: Constructing a new double-circuit, 230-kV transmission line paralleling the existing double-circuit, 230-kV line from the O'Banion Substation to the Elverta Substation; Realigning a portion of the existing Cottonwood-Roseville single-circuit, 230-kV transmission line north of Elverta Substation; and Reconductoring the existing double-circuit, 230-kV transmission line from the Elverta Substation to the Tracy Substation. Public Hearings on the Draft EIS will be held between December 9-12, 2002. Comments on this Draft EIS are encouraged and should be sent to Ms. Loreen McMahon (above). Comments must be received by December 30, 2002.

N /A

2002-11-15T23:59:59.000Z

192

Hybrid particle traps and conditioning procedure for gas insulated transmission lines  

DOE Patents [OSTI]

A gas insulated transmission line includes an outer sheath, an inner condor within the outer sheath, insulating supports supporting the inner conductor within the outer sheath, and an insulating gas electrically insulating the inner conductor from the outer sheath. An apertured particle trapping ring is disposed within the outer sheath, and the trapping ring has a pair of dielectric members secured at each longitudinal end thereof, with the dielectric members extending outwardly from the trapping ring along an arc. A support sheet having an adhesive coating thereon is secured to the trapping ring and disposed on the outer sheath within the low field region formed between the trapping ring and the outer sheath. A conditioning method used to condition the transmission line prior to activation in service comprises applying an AC voltage to the inner conductor in a plurality of voltage-time steps, with the voltage-time steps increasing in voltage magnitude while decreasing in time duration.

Dale, Steinar J. (Monroeville, PA); Cookson, Alan H. (Churchill, PA)

1982-01-01T23:59:59.000Z

193

Clustering Categories in Support Vector Machines  

E-Print Network [OSTI]

Jun 23, 2014 ... Abstract: Support Vector Machines (SVM) is the state-of-the-art in Supervised Classification. In this paper the Cluster Support Vector Machines...

Emilio Carrizosa

2014-06-23T23:59:59.000Z

194

Supernova Recognition using Support Vector Machines  

E-Print Network [OSTI]

tion Using Support Vector Machines and Neural Networks.using Support Vector Machines Raquel A. Romano Cecilia R.nding supernovae do not employ machine learning techniques.

Romano, Raquel A.; Aragon, Cecilia R.; Ding, Chris

2006-01-01T23:59:59.000Z

195

Colorado: Energy Modeling Products Support Energy Efficiency...  

Office of Environmental Management (EM)

Colorado: Energy Modeling Products Support Energy Efficiency Projects Colorado: Energy Modeling Products Support Energy Efficiency Projects May 1, 2014 - 11:04am Addthis Xcel...

196

Clean Cities Regional Support & Petroleum Displacement Awards...  

Broader source: Energy.gov (indexed) [DOE]

Clean Cities Regional Support & Petroleum Displacement Awards Clean Cities Regional Support & Petroleum Displacement Awards 2009 DOE Hydrogen Program and Vehicle Technologies...

197

Gamma-Ray Line Observations with RHESSI  

E-Print Network [OSTI]

The Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) has been observing gamma-ray lines from the Sun and the Galaxy since its launch in February 2002. Here I summarize the status of RHESSI observations of solar lines (nuclear de-excitation, neutron capture, and positron annihilation), the lines of $^{26}$Al and $^{60}$Fe from the inner Galaxy, and the search for positron annihilation in novae.

David M. Smith

2004-04-30T23:59:59.000Z

198

Emergency Management Lines of Inquiry, April 2008  

Energy Savers [EERE]

Lines of Inquiry plansprotocols, interview facility managers and responders, and conduct facility walkdowns, as necessary. In : ment s and responsibilities for program...

199

DOE Sustainability Reporting Open Line Help Call  

Broader source: Energy.gov [DOE]

The Sustainability Performance Office (SPO) sponsors open line help calls to assist DOE sites and national laboratories with the annual sustainability reporting process. Representatives from the...

200

Detonator comprising a nonlinear transmission line  

DOE Patents [OSTI]

Detonators are described herein. In a general embodiment, the detonator includes a nonlinear transmission line that has a variable capacitance. Capacitance of the nonlinear transmission line is a function of voltage on the nonlinear transmission line. The nonlinear transmission line receives a voltage pulse from a voltage source and compresses the voltage pulse to generate a trigger signal. Compressing the voltage pulse includes increasing amplitude of the voltage pulse and decreasing length of the voltage pulse in time. An igniter receives the trigger signal and detonates an explosive responsive to receipt of the trigger signal.

Elizondo-Decanini, Juan M

2014-12-30T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

On the Velocity and Intensity Line Asymmetries  

E-Print Network [OSTI]

We show that, if solar 5 min. oscillations are excited by convection in the upper layers of the convective envelope, it is impossible to explain the opposite line asymmetries observed in the velocity and intensity spectra with assumptions on the dissipations which reduce the problem to a second order one. The interpretation of that observation requires to solve the full non-adiabatic problem which is of the fourth or sixth order. We also analyze the causes of line asymmetries in the frame of the general problem and we show that to locate the source, it is better to study line asymmetries not too far from line centers.

M. Gabriel

1997-10-01T23:59:59.000Z

202

Asiakastyytyvisyystutkimus Sun Lines Oy:n tilausristeilyist.  

E-Print Network [OSTI]

??Tmn tutkimuksellisen opinnytetyn tarkoituksena on toteuttaa asiakastyytyvisyystutkimus Helsingin saaristossa risteilyliikennett harjoittavan Sun Lines Oy:n tilausristeilyist. Vuonna 1956 toimintansa aloittaneen perheyrityksen toimintaan kuuluvat tilausristeilyjen ohella linjaliikenne (more)

Mattila, Outi

2010-01-01T23:59:59.000Z

203

North American Short Line and Regional Railroads Industry Report  

Broader source: Energy.gov (indexed) [DOE]

45G Short Line Tax Credit 45G Short Line Tax Credit government owned short lines government owned short lines State grants State grants D.O.E. investment D.O.E. investment...

204

Deployment support leading to implementation  

SciTech Connect (OSTI)

This quarterly report discusses progress on the following tasks and subtasks: (Task 1)--Field demonstration of prefabricated vertical drains (PVD) technology: Subtask 1.1--Pilot scale demonstration of TCE flushing through PVDs at the DOE/RMI Extrusion Plant; Subtask 1.2--Technical support on surfactants and QA/QC for field operations employing PVDs at the RMI Ashtabula, Ohio, site; Subtask 1.3--Operational support of the PVDs and engineering/design/construction/operations of a wastewater treatment plant for extracted fluids; Subtask 1.4--Installation of PVDs at the RMI Ashtabulah, Ohio, site; and Subtask 1.5--Removal of surfactants and trichloroethylene (TCE) from extracted groundwater at the RMI Ashtabula, Ohio, site; (Task 2)--Watershed economics and overview studies; and (Task 3)--Project management.

NONE

1999-11-01T23:59:59.000Z

205

State Support of Domestic Production  

SciTech Connect (OSTI)

This project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under the State Support of Domestic Production DE-FC26-04NT15456. The Interstate Oil and Gas Compact Commission (IOGCC) performed efforts in support of State programs related to the security, reliability and growth if our nation's domestic production of oil and natural gas. The project objectives were to improve the States ability to monitor the security of oil and gas operations; to maximize the production of domestic oil and natural gas thereby minimizing the threat to national security posed by interruptions in energy imports; to assist States in developing and maintaining high standards of environmental protection; to assist in addressing issues that limit the capacity of the industry; to promote the deployment of the appropriate application of technology for regulatory efficiency; and to inform the public about emerging energy issues.

Amy Wright

2007-12-30T23:59:59.000Z

206

Burning Plasma Support Research Program  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth (AOD)ProductssondeadjustsondeadjustAboutScienceCareersEnergy,ServicesBurning Plasma Support Research Program

207

Supporting Multiple Workloads, Batch Systems,  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmosphericNuclear Security AdministrationcontrollerNanocrystalline Gallium OxideSuminDepositionSupplierSupporting Multiple

208

ELECTRICAL SUPPORT SYSTEM DESCRIPTION DOCUMENT  

SciTech Connect (OSTI)

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to support the design process have been taken from higher-level requirements documents such as the ''Project Design Criteria Document'' (PDC) (Doraswamy 2004), and fire hazards analyses. The above-mentioned low-level documents address ''Project Requirements Document'' (PRD) (Canon and Leitner 2003) requirements. This SDD contains several appendices that include supporting information. Appendix B lists key system charts, diagrams, drawings, and lists, and Appendix C includes a list of system procedures.

S. Roy

2004-06-24T23:59:59.000Z

209

The Design Complexity of Program Undo Support in a General Purpose  

E-Print Network [OSTI]

Design Complexity of Program Undo Hardware overhead 12 Avg. 4.5% overhead 0 1000 2000 3000 4000 5000 6000;Radu Teodorescu - University of Illinois Design Complexity of Program Undo Lines of code 14 0 500 1000The Design Complexity of Program Undo Support in a General Purpose Processor Radu Teodorescu

Torrellas, Josep

210

Determination of substrate pinning in epitaxial and supported graphene layers via Raman scattering  

E-Print Network [OSTI]

The temperature-induced shift of the Raman G line in epitaxial graphene on SiC and Ni surfaces, as well as in graphene supported on SiO[subscript 2], is investigated with Raman spectroscopy. The thermal shift rate of ...

Ferralis, Nicola

211

xDSL line driver design  

E-Print Network [OSTI]

xDSL line driver is a very important element in xDSL systems. This thesis proposes a three stage xDSL line driver solution based on a multipath feedforward compensation principle. TSMC 0.8 micro meter high voltage BiCMOS technology is used as a...

Zhang, Xiaoyong

2001-01-01T23:59:59.000Z

212

results and benefits... The Bittern Line Carbon  

E-Print Network [OSTI]

results and benefits... The Bittern Line Carbon Neutral Stations Transport Regeneration Ltd. June 2008 c a s e s t u d yCRed carbon reduction Project Summary Our client, Transport Regeneration Ltd., aims to make nine stations on the Bittern Line between Norwich and Sheringham carbon neutral

Everest, Graham R

213

LA NACION LINE Ciencia/Salud  

E-Print Network [OSTI]

LA NACION LINE Ciencia/Salud Viernes 4 de Abril de 2003 LA NACION LINE | Ed. Anteriores | 4 de Abril de 2003 | Ciencia/Salud | Nota Estudio del Museo Egidio Feruglio, de Trelew La diversidad vegetal://www.lanacion.com.ar/03/04/04/sl_486019.asp LA NACION | 04/04/2003 | Página 14 | Ciencia/Salud Volver a ediciones

Wilf, Peter

214

Dynamic simulation of polyester mooring lines  

E-Print Network [OSTI]

A numerical scheme, known as CABLE3D, originally developed for the simulation of dynamics of steel chain-wire mooring lines is extended to allow for the large elongation in a mooring line, the dependence of the modulus on tension, and energy...

Kim, Min Suk

2004-09-30T23:59:59.000Z

215

Line geometry and electromagnetism I: basic structures  

E-Print Network [OSTI]

Some key notions of line geometry are recalled, along with their application to mechanics. It is then shown that most of the basic structures that one introduces in the pre-metric formulation of electromagnetism can be interpreted directly in terms of corresponding concepts in line geometry. The results are summarized in a table.

D. H. Delphenich

2013-09-11T23:59:59.000Z

216

Electric Transmission Line Flashover Prediction System  

E-Print Network [OSTI]

Center since 1996 PSERC #12;Power Systems Engineering Research Center Electric Transmission LineElectric Transmission Line Flashover Prediction System Ph.D. Thesis and Final Project Report Power@asu.edu Power Systems Engineering Research Center This is a project report from the Power Systems Engineering

217

Hook nozzle arrangement for supporting airfoil vanes  

DOE Patents [OSTI]

A gas turbine engine's nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic.

Shaffer, James E. (Maitland, FL); Norton, Paul F. (San Diego, CA)

1996-01-01T23:59:59.000Z

218

Hook nozzle arrangement for supporting airfoil vanes  

DOE Patents [OSTI]

A gas turbine engine`s nozzle structure includes a nozzle support ring, a plurality of shroud segments, and a plurality of airfoil vanes. The plurality of shroud segments are distributed around the nozzle support ring. Each airfoil vane is connected to a corresponding shroud segment so that the airfoil vanes are also distributed around the nozzle support ring. Each shroud segment has a hook engaging the nozzle support ring so that the shroud segments and corresponding airfoil vanes are supported by the nozzle support ring. The nozzle support ring, the shroud segments, and the airfoil vanes may be ceramic. 8 figs.

Shaffer, J.E.; Norton, P.F.

1996-02-20T23:59:59.000Z

219

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo  

E-Print Network [OSTI]

Product Lines that supply other Product Lines: A Service-Oriented Approach Salvador Trujillo@uni-passau.de Abstract A software product line is a family of software products that share a set of core assets with the goal of reuse. In this paper, we focus on a scenario in which different products from different product

Apel, Sven

220

NREL Research Support Facilities (RSF)  

High Performance Buildings Database

Golden, CO NREL's Research Support Facilities building (RSF) will be a total of 218,000 sq. feet. It will have two parallel secured employee wings, one of which will be 4 stories and the other 3 stories. A connector building housing most of the public spaces will run perpendicular through both wings. The RSF will provide workspace for 742 employees. The RSF is designed to be a zero energy building through the use of innovative energy efficiency, daylighting, and renewable energy strategies, including photovoltaic solar electric systems to generate electricity.

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Supporting a Hawaii Hydrogen Economy  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious RankCombustion |Energy Usage »of Energy Strain Rate4Superhard CoatingNovemberDecember 23,Supporting a

222

Air Risk Information Support Center  

SciTech Connect (OSTI)

The Air Risk Information Support Center (Air RISC) was initiated in early 1988 by the US Environmental Protection Agency`s (EPA) Office of Health and Environmental Assessment (OHEA) and the Office of Air Quality Planning and Standards (OAQPS) as a technology transfer effort that would focus on providing information to state and local environmental agencies and to EPA Regional Offices in the areas of health, risk, and exposure assessment for toxic air pollutants. Technical information is fostered and disseminated by Air RISCs three primary activities: (1) a {open_quotes}hotline{close_quotes}, (2) quick turn-around technical assistance projects, and (3) general technical guidance projects. 1 ref., 2 figs.

Shoaf, C.R.; Guth, D.J. [Environmental Protection Agency, Washington, DC (United States)

1990-12-31T23:59:59.000Z

223

Analysis Efforts Supporting NSTX Upgrades  

SciTech Connect (OSTI)

The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by a factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.

H.Zhang, P. Titus, P. Rogoff, A.Zolfaghari, D. Mangra, M. Smith

2010-11-29T23:59:59.000Z

224

Bulk Vitrification Performance Enhancement: Refractory Lining Protection Against Molten Salt Penetration  

SciTech Connect (OSTI)

Bulk vitrification (BV) is a process that heats a feed material that consists of glass-forming solids and dried low-activity waste (LAW) in a disposable refractory-lined metal box using electrical power supplied through carbon electrodes. The feed is heated to the point that the LAW decomposes and combines with the solids to generate a vitreous waste form. This study supports the BV design and operations by exploring various methods aimed at reducing the quantities of soluble Tc in the castable refractory block portion of the refractory lining, which limits the effectiveness of the final waste form.

Hrma, Pavel R.; Bagaasen, Larry M.; Schweiger, Michael J.; Evans, Michael B.; Smith, Benjamin T.; Arrigoni, Benjamin M.; Kim, Dong-Sang; Rodriguez, Carmen P.; Yokuda, Satoru T.; Matyas, Josef; Buchmiller, William C.; Gallegos, Autumn B.; Fluegel, Alexander

2007-08-06T23:59:59.000Z

225

EA-1948: Gila-North Gila Transmission Line Rebuild and Upgrade Project, Yuma County, Arizona  

Broader source: Energy.gov [DOE]

DOEs Western Area Power Administration (Western) prepared this EA to analyze the potential environmental impacts of a proposal to rebuild and upgrade two parallel 4.8-mile transmission lines between the Gila and North Gila Substations and take actions in support of portions of Arizona Public Services construction of a new, 12.8 mile 230-kV transmission line between North Gila and a proposed substation in Yuma County, Arizona. The U.S. Bureau of Reclamation and U.S. Army Corps of Engineers are cooperating agencies.

226

Channelized voice over digital subscriber line  

E-Print Network [OSTI]

The objective of this article is to present a promising voice over digital subscriber line (VoDSL) solution: an alternative method that uses physical layer transportation to provide channelized VoDSL (CVoDSL). This article ...

Habib, A.; Saiedian, Hossein

2002-10-01T23:59:59.000Z

227

Temperatures in the blast furnace refractory lining  

SciTech Connect (OSTI)

The campaign life duration of a blast furnace is mainly determined by the condition of the refractory lining in heavy-duty zones such as the hearth, bosh, belly and lower stack. To achieve a desired lifetime, the temperature of the lining in these areas thereby proved to be the decisive controllable parameter. Low operating temperatures result in prolonged service life and are attained through high cooling efficiency. Besides the refractory grade chosen, the wear profile is mainly determined by the type of cooling system applied and the cooling intensity. Therefore, an appropriate compromise between long service life and energy losses has to be found in each case. In order to predict the service life of a lining it is important to know the wear condition at all times during the campaign. The paper describes the approaches the authors have made so far on European blast furnaces, on a theoretical and practical basis, on how to analyze the lining wear.

Hebel, R.; Streuber, C. [Didier-M and P Energietechnik GmbH, Wiesbaden (Germany); Steiger, R. [Didier-M and P Engineering Services, Highland, IN (United States); Jeschar, R. [TU Clausthal (Germany). Inst. fuer Energieverfahrenstechnik und Brennstofftechnik

1995-12-01T23:59:59.000Z

228

Ames Lab 101: Next Generation Power Lines  

SciTech Connect (OSTI)

Ames Laboratory scientist Alan Russell discusses the need to develop new power lines that are stronger and more conductive as a way to address the problem of the nation's aging and inadequate power grid.

Russell, Alan

2010-01-01T23:59:59.000Z

229

Insulate Steam Distribution and Condensate Return Lines  

SciTech Connect (OSTI)

This revised ITP tip sheet on insulating steam distribution and condensate return lines provides how-to advice for improving industrial steam systems using low-cost, proven practices and technologies.

Not Available

2006-01-01T23:59:59.000Z

230

Electrical Transmission Line Diametrical Retention Mechanism  

DOE Patents [OSTI]

The invention is a mechanism for retaining an electrical transmission line. In one embodiment of the invention it is a system for retaining an electrical transmission line within downhole components. The invention allows a transmission line to be attached to the internal diameter of drilling components that have a substantially uniform drilling diameter. In accordance with one aspect of the invention, the system includes a plurality of downhole components, such as sections of pipe in a drill string, drill collars, heavy weight drill pipe, and jars. The system also includes a coaxial cable running between the first and second end of a drill pipe, the coaxial cable having a conductive tube and a conductive core within it. The invention allows the electrical transmission line to withstand the tension and compression of drill pipe during routine drilling cycles.

Hall, David R. (Provo, UT); Hall, Jr., H. Tracy (Provo, UT); Pixton, David (Lehi, UT); Dahlgren, Scott (Provo, UT); Sneddon, Cameron (Provo, UT); Briscoe, Michael (Lehi, UT); Fox, Joe (Spanish Fork, UT)

2006-01-03T23:59:59.000Z

231

Line Environment, Safety and Health Oversight  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

Sets forth the Department's expectations line management environment, safety and health (ES&H) oversight and for the use of contractor self-assessment programs as the cornerstone for this oversight. Canceled by DOE O 226.1.

1997-06-26T23:59:59.000Z

232

Ames Lab 101: Next Generation Power Lines  

ScienceCinema (OSTI)

Ames Laboratory scientist Alan Russell discusses the need to develop new power lines that are stronger and more conductive as a way to address the problem of the nation's aging and inadequate power grid.

Russell, Alan

2012-08-29T23:59:59.000Z

233

IIR algorithms for adaptive line enhancement  

SciTech Connect (OSTI)

We introduce a simple IIR structure for the adaptive line enhancer. Two algorithms based on gradient-search techniques are presented for adapting the structure. Results from experiments which utilized real data as well as computer simulations are provided.

David, R.A.; Stearns, S.D.; Elliott, G.R.; Etter, D.M.

1983-01-01T23:59:59.000Z

234

Heat-Traced Fluid Transfer Lines  

E-Print Network [OSTI]

HEAT-TRACED FLUID TRANSFER LINES Robert E. Schilling, P.E. Eaton Corporation Aurora, Ohio This paper discusses basic considerations in designing a heat tracing system using either steam or electrical tracing. Four basic reasons to heat...

Schilling, R. E.

1984-01-01T23:59:59.000Z

235

What is the Broad Line Region?  

E-Print Network [OSTI]

What is the Broad Line Region (BLR) made of? What determines its location? Why is it sometimes missing? What controls its properties? Some recent results and new approaches which may shed light on these issues are briefly described.

Ari Laor

2003-12-16T23:59:59.000Z

236

Productivity Improvement of a Manual Assembly Line  

E-Print Network [OSTI]

The current project addresses the productivity improvement of a manual assembly line by making use of operations analysis in the framework of Lean production. A methodology is proposed that helps to improve the productivity of any production process...

Yerasi, Pranavi

2012-10-19T23:59:59.000Z

237

Grand Coulee Transmission Line Replacement Project  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

by the Bureau of Reclamation to design and construct six new 500-kV overhead transmission lines at Grand Coulee Dam. BPA will replace the existing underground transmission...

238

Corona losses in HVdc bipolar lines  

SciTech Connect (OSTI)

The problem related to the prediction of corona losses in HVdc bipolar lines has been solved, in the past, by means of semi-empirical monomial formulae. However, the proposed formulae that are simpler to use do not always give adequate calculation precision, while the formulae that provide the closest results require implicit functions of different complexity, which are difficult to apply; moreover, it is not possible to understand clearly what influence the variations of the different line parameters have on the losses themselves. The new monomial semi-empirical relationship, proposed to predict the corona losses in HVdc bipolar lines, is very simple to use; it highlights the dependence of power losses due to the corona effect by the different line parameters. The formula has been developed by elaborating a considerable amount of available experimental data.

Corbellini, U.; Pelacchi, P. [Univ. of Pisa (Italy). Dept. of Electric Systems and Automation] [Univ. of Pisa (Italy). Dept. of Electric Systems and Automation

1996-07-01T23:59:59.000Z

239

Lining Over Refractory - Conserve Energy and Capital  

E-Print Network [OSTI]

.~. LINING OVER REFRACTORY - CONSERVE ENERGY & CAPITAL by Mark L. Jost Gerald L. Barrows The Carborundum Company Niagara Falls, New York INTRODUCTION Companies operating industrial heating equip Advantages ment find themselves coming under...

Jost, M. L.; Barrows, G. L.

1980-01-01T23:59:59.000Z

240

Reactive Power Support Services in Electricity Markets  

E-Print Network [OSTI]

Reactive Power Support Services in Electricity Markets Costing and Pricing of Ancillary Services Final Project Report Power Systems Engineering Research Center A National Science Foundation Industry Reactive Power Support Services in Electricity Markets Costing and Pricing of Ancillary Services Project

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES  

E-Print Network [OSTI]

Chapter 9 CLASSIFYING MICROARRAY DATA USING SUPPORT VECTOR MACHINES Sayan Mukherjee Post biological systems. Molecular classification approaches based on machine learning algorithms applied to DNA., 2001). One particular machine learning algorithm, Support Vector Machines (SVMs), has shown promise

Mukherjee, Sayan

242

Education Abroad Curriculum Integration Support Grants  

E-Print Network [OSTI]

Education Abroad Curriculum Integration Support Grants Application of a larger pool of nearly $30,000 for new international education abroad initiatives Criteria 1. Education Abroad Curriculum Integration Support Grants are to be applied

243

The Imaging and Medical Beam Line at the Australian Synchrotron  

SciTech Connect (OSTI)

As a result of the enthusiastic support from the Australian biomedical, medical and clinical communities, the Australian Synchrotron is constructing a world-class facility for medical research, the 'Imaging and Medical Beamline'. The IMBL began phased commissioning in late 2008 and is scheduled to commence the first clinical research programs with patients in 2011. It will provide unrivalled x-ray facilities for imaging and radiotherapy for a wide range of research applications in diseases, treatments and understanding of physiological processes. The main clinical research drivers are currently high resolution and sensitivity cardiac and breast imaging, cell tracking applied to regenerative and stem cell medicine and cancer therapies. The beam line has a maximum source to sample distance of 136 m and will deliver a 60 cm by 4 cm x-ray beam1 - monochromatic and white - to a three storey satellite building fully equipped for pre-clinical and clinical research. Currently operating with a 1.4 Tesla multi-pole wiggler, it will upgrade to a 4.2 Tesla device which requires the ability to handle up to 21 kW of x-ray power at any point along the beam line. The applications envisaged for this facility include imaging thick objects encompassing materials, humans and animals. Imaging can be performed in the range 15-150 keV. Radiotherapy research typically requires energies between 30 and 120 keV, for both monochromatic and broad beam.

Hausermann, Daniel; Hall, Chris; Maksimenko, Anton; Campbell, Colin [Australian Synchrotron Company, 800 Blackburn Road, Clayton, Victoria 3168 (Australia)

2010-07-23T23:59:59.000Z

244

Stabilized fuel with silica support structure  

SciTech Connect (OSTI)

This report describes a stabilized fuel which is supported by a silica support structure. The silica support structure provides a low density, high porosity vehicle for safely carrying hydrocarbon fuels. The silica support structure for hydrocarbon fuel does not produce toxic material residues on combustion which would pose environmentally sensitive disposal problems. The silica stabilized fuel composition is useful as a low temperature, continuous burning fire starter for wood or charcoal.

Poco, J.F.; Hrubesh, L.W.

1991-12-31T23:59:59.000Z

245

Puerto Rico Disaster Decision Support Tool  

E-Print Network [OSTI]

Puerto Rico Disaster Decision Support Tool: An innovative step towards community resilience Support Tool Pilot Internet-based scalable mapping server Emergency management geo-referenced information for all municipalities in Puerto Rico #12;Disaster Decision Support Tool (DDST) What is a GIS

Firestone, Jeremy

246

Ashland Area Support Substation Project  

SciTech Connect (OSTI)

The Bonneville Power Administration (BPA) provides wholesale electric service to the City of Ashland (the City) by transferring power over Pacific Power Light Company's (PP L) 115-kilovolt (kV) transmission lines and through PP L's Ashland and Oak Knoll Substations. The City distributes power over a 12.5-kV system which is heavily loaded during winter peak periods and which has reached the limit of its ability to serve peak loads in a reliable manner. Peak loads under normal winter conditions have exceeded the ratings of the transformers at both the Ashland and Oak Knoll Substations. In 1989, the City modified its distribution system at the request of PP L to allow transfer of three megawatts (MW's) of electric power from the overloaded Ashland Substation to the Oak Knoll Substation. In cooperation with PP L, BPA installed a temporary 6-8 megavolt-amp (MVA) 115-12.5-kV transformer for this purpose. This additional transformer, however, is only a temporary remedy. BPA needs to provide additional, reliable long-term service to the Ashland area through additional transformation in order to keep similar power failures from occurring during upcoming winters in the Ashland area. The temporary installation of another 20-MVA mobile transformer at the Ashland Substation and additional load curtailment are currently being studied to provide for sustained electrical service by the peak winter period 1992. Two overall electrical plans-of-service are described and evaluated in this report. One of them is proposed for action. Within that proposed plan-of-service are location options for the substation. Note that descriptions of actions that may be taken by the City of Ashland are based on information provided by them.

Not Available

1992-06-01T23:59:59.000Z

247

Irradiation Testing of Blanket Materials at the HFR Petten with On Line Tritium Monitoring  

SciTech Connect (OSTI)

Irradiation experiments are performed in support of fusion blanket technology development. These comprise ceramic solid breeder materials, and a liquid Lithium Lead alloy, as well as blanket subassemblies and components. Experimental facilities at the HFR to study tritium release, permeation characteristics, and neutron irradiation performance, have recently been extended. This paper gives an overview on the tritium breeding materials irradiation programme and describes the facilities required for irradiation testing and on-line tritium measurement.

Magielsen, A.J.; Laan, J.G. van der; Hegeman, J.B.J.; Stijkel, M.P.; Ooijevaar, M.A.G

2005-07-15T23:59:59.000Z

248

VLA Observations of Carbon 91$?$ Recombination Line Emission in W49 North  

E-Print Network [OSTI]

We have detected C91$\\alpha$ (8.5891 GHz) emission toward 4 ultra-compact \\HII regions (\\UCHII s; W49G, J, L & C) in the W49 North massive star forming region with the Very Large Array (VLA) at 3\\arcsec resolution. No carbon line emission was detected toward \\UCHII s W49F, A, O, S and Q at this frequency to a 3$\\sigma$ level of 2 mJy. We also observed the same region in the C75$\\alpha$ line (15.3 GHz) with no detection at a 3$\\sigma$ level of 6 mJy with a 1\\arcsec.7 beam. Detection of line emission toward these sources add supporting data to the earlier result of \

D. Anish Roshi; C. G. De Pree; W. M. Goss; K. R. Anantharamaiah

2006-02-13T23:59:59.000Z

249

Compact submanifolds supporting singular interactions  

SciTech Connect (OSTI)

A quantum particle moving under the influence of singular interactions on embedded surfaces furnish an interesting example from the spectral point of view. In these problems, the possible occurrence of a bound-state is perhaps the most important aspect. Such systems can be introduced as quadratic forms and generically they do not require renormalization. Yet an alternative path through the resolvent is also beneficial to study various properties. In the present work, we address these issues for compact surfaces embedded in a class of ambient manifolds. We discover that there is an exact bound state solution written in terms of the heat kernel of the ambient manifold for a range of coupling strengths. Moreover, we develop techniques to estimate bounds on the ground state energy when several surfaces, each of which admits a bound state solution, coexist. -- Highlights: Schrdinger operator with singular interactions supported on compact submanifolds. Exact bound-state solution in terms of the heat kernel of the ambient manifold. Generalization of the variational approach to a collection of submanifolds. Existence of a lower bound for a unique ground state energy.

Kaynak, Burak Tevfik, E-mail: burak.kaynak@boun.edu.tr; Teoman Turgut, O., E-mail: turgutte@boun.edu.tr

2013-12-15T23:59:59.000Z

250

New Construction of Distribution Lines, Service Lines, and Appurtenant Facilities in Residential Subdivisions (New York)  

Broader source: Energy.gov [DOE]

Any proposed construction of electricity-related facilities in residential subdivisions, including distribution and service lines and appurtenant facilities, is subject to these regulations, which...

251

Genetic diversity and combining ability among sorghum conversion lines  

E-Print Network [OSTI]

on genetic similarities estimated using AFLP markers and (3) to estimate heterosis, general and specific combining ability for grain yield among the set of conversion lines. Genetic diversity was present in the set of conversion lines evaluated. For the lines...

Mateo Moncada, Rafael Arturo

2007-04-25T23:59:59.000Z

252

MATHEMATICAL ANALYSIS OF CONDUCTING AND SUPERCONDUCTING TRANSMISSION LINES  

E-Print Network [OSTI]

MATHEMATICAL ANALYSIS OF CONDUCTING AND SUPERCONDUCTING TRANSMISSION LINES ANNE-SOPHIE BONNET propagation in the microstrip transmission lines used in microelectronics. In the first part, the case of the perfectly conducting strip. Key words. superconducting transmission lines, waveguides, spectral analysis

Ramdani, Karim - Institut de Mathématiques ?lie Cartan, Université Henri Poincaré

253

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines  

E-Print Network [OSTI]

Waveform Relaxation Technique for Longitudinal Partitioning of Transmission Lines Martin Gander problem for multiple coupled transmission lines by a so-called transverse partitioning technique. The WR mode transmission line problems. Previous longitudinal partitioning work using the classical WR

Gander, Martin J.

254

A high accuracy computed water line list  

E-Print Network [OSTI]

A computed list of H$_{2}$$^{16}$O infra-red transition frequencies and intensities is presented. The list, BT2, was produced using a discrete variable representation two-step approach for solving the rotation-vibration nuclear motions. It is the most complete water line list in existence, comprising over 500 million transitions (65% more than any other list) and it is also the most accurate (over 90% of all known experimental energy levels are within 0.3 cm$^{-1}$ of the BT2 values). Its accuracy has been confirmed by extensive testing against astronomical and laboratory data. The line list has been used to identify individual water lines in a variety of objects including: comets, sunspots, a brown dwarf and the nova-like object V838 Mon. Comparison of the observed intensities with those generated by BT2 enables physical values to be derived for these objects. The line list can also be used to provide an opacity for models of the atmospheres of M-dwarf stars and assign previously unknown water lines in laboratory spectra.

R. J. Barber; J. Tennyson; G. J. Harris; R. N. Tolchenov

2006-01-11T23:59:59.000Z

255

Developmental dyslexia: The Visual attention span deficit Marie-Line Bosse*, Marie Josphe Tainturier** and Sylviane Valdois*,  

E-Print Network [OSTI]

1 Developmental dyslexia: The Visual attention span deficit hypothesis Marie-Line Bosse*, Marie to developmental dyslexia, independently of a phonological disorder. In this study, this hypothesis was assessed. Overall, these findings support a multi-factorial view of developmental dyslexia. In many cases

Boyer, Edmond

256

DATA-DRIVEN ON-LINE PREDICTION OF THE AVAILABLE RECOVERY TIME IN NUCLEAR POWER PLANT FAILURE SCENARIOS  

E-Print Network [OSTI]

1 DATA-DRIVEN ON-LINE PREDICTION OF THE AVAILABLE RECOVERY TIME IN NUCLEAR POWER PLANT FAILURE-XADS). Key Words: Recovery Time, Emergency Accident Management, Nuclear Power Plant, Lead- Bismuth Eutectic e [wre, 2001]. Yet, the problem of what kind of decision support to provide to nuclear power plant

Boyer, Edmond

257

EIS-0447: Champlain Hudson Power Express Transmission Line Project...  

Broader source: Energy.gov (indexed) [DOE]

7: Champlain Hudson Power Express Transmission Line Project, New York EIS-0447: Champlain Hudson Power Express Transmission Line Project, New York Summary This EIS evaluates the...

258

EA-1880: Big Bend to Witten Transmission Line Project, South...  

Office of Environmental Management (EM)

880: Big Bend to Witten Transmission Line Project, South Dakota EA-1880: Big Bend to Witten Transmission Line Project, South Dakota Summary The USDA Rural Utilities Service, with...

259

Request for Information on Permitting of Transmission Lines:...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Request for Information on Permitting of Transmission Lines: Federal Register Notice Volume 77, No. 38 - Feb. 27, 2012 Request for Information on Permitting of Transmission Lines:...

260

alpha line profile: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

calculations of IP line profiles based on hot model distributions of interplanetary hydrogen. We also find that the line profiles get narrower during solar maximum. The results...

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Load-resistant coaxial transmission line  

DOE Patents [OSTI]

A transmission line for downhole tools that make up all or part of a tool string for drilling and production of oil, gas, and geothermal wells that can withstand the dynamic gravitational forces and other accelerations associated with downhole excavations. The transmission line has a metal tube, or outer conductor, that houses a coaxial wire inner conductor. A non-metallic dielectric material is interposed between the inner and outer conductors. The outer and inner conductors and the dielectric are sufficiently compressed together so that independent motion between them is abated. Compression of the components of the transmission line may be achieved by drawing the transmission through one or more dies in order to draw down the outer conductor onto the dielectric, or by expanding the inner conductor against the dielectric using a mandrel or hydraulic pressure. Non-metallic bead segments may be used in aid of the compression necessary to resist the dynamic forces and accelerations of drilling.

Hall, David R.; Fox, Joe

2006-01-03T23:59:59.000Z

262

Dynamic Line Rating: Research and Policy Evaluation  

SciTech Connect (OSTI)

Dynamic Line Rating (DLR) is a smart grid technology that allows the rating of electrical conductors to be increased based on local weather conditions. Overhead lines are conventionally given a conservative rating based on worst case scenarios. We demonstrate that observing the conditions in real time leads to additional capacity and safer operation. This paper provides a report of a pioneering scheme in the United States of America in which DLR has been applied. Thereby, we demonstrate that observing the local weather conditions in real time leads to additional capacity and safer operation. Secondly, we discuss limitations involved. In doing so, we arrive at novel insights which will inform and improve future DLR projects. Third, we provide a policy background and discussion to clarify the technologys potential and identifies barriers to the imminent adoption of dynamic line rating systems. We provide suggestions for regulatory bodies about possible improvements in policy to encourage adoption of this beneficial technology.

Jake P. Gentle; Kurt S. Myers; Michael R. West

2014-07-01T23:59:59.000Z

263

Masking line foregrounds in intensity mapping surveys  

E-Print Network [OSTI]

We address the problem of line confusion in intensity mapping surveys and explore the possibility to mitigate line foreground contamination by progressively masking the brightest pixels in the observed map. We consider experiments targeting CO(1-0) at $z=3$, Ly$\\alpha$ at $z=7$, and CII at $z=7$, and use simulated intensity maps, which include both clustering and shot noise components of the signal and possible foregrounds, in order to test the efficiency of our method. We find that for CO and Ly$\\alpha$ it is quite possible to remove most of the foreground contribution from the maps via only 1%-3% pixel masking. The CII maps will be more difficult to clean, however, due to instrumental constraints and the high-intensity foreground contamination involved. While the masking procedure sacrifices much of the astrophysical information present in our maps, we demonstrate that useful cosmological information in the targeted lines can be successfully retrieved.

Breysse, Patrick C; Kamionkowski, Marc

2015-01-01T23:59:59.000Z

264

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays  

E-Print Network [OSTI]

Challenges to Overcurrent Protection Devices under Line-line Faults in Solar Photovoltaic Arrays Ye-MA, LLC Newburyport, MA, US Abstract--Solar photovoltaic (PV) arrays behave distinctively from remain undetected, which could lead to reduced system efficiency, reduced system reliability, and even

Lehman, Brad

265

Abstract--Power Line Communications (PLC) is used for information exchange over the lines  

E-Print Network [OSTI]

Abstract-- Power Line Communications (PLC) is used for information exchange over the lines installed for delivering the electrical power. Inhome PLC is a technology which delivers telecom services to every corner of a household through already existing electrical wiring. In recent years, PLC has emerged

Boyer, Edmond

266

Concurrent Wind Cooling in Power Transmission Lines  

SciTech Connect (OSTI)

Idaho National Laboratory and the Idaho Power Company, with collaboration from Idaho State University, have been working on a project to monitor wind and other environmental data parameters along certain electrical transmission corridors. The combination of both real-time historical weather and environmental data is being used to model, validate, and recommend possibilities for dynamic operations of the transmission lines for power and energy carrying capacity. The planned results can also be used to influence decisions about proposed design criteria for or upgrades to certain sections of the transmission lines.

Jake P Gentle

2012-08-01T23:59:59.000Z

267

Inductive gas line for pulsed lasers  

DOE Patents [OSTI]

A gas laser having a metal inlet gas feed line assembly shaped as a coil, to function as an electrical inductance and therefore high impedance to pulses of electric current applied to electrodes at opposite ends of a discharge tube of a laser, for example. This eliminates a discharge path for the laser through the inlet gas feed line. A ferrite core extends through the coil to increase the inductance of the coil and provide better electric isolation. By elimination of any discharge breakdown through the gas supply, efficiency is increased and a significantly longer operating lifetime of the laser is provided.

Benett, William J. (Livermore, CA); Alger, Terry W. (Tracy, CA)

1985-01-01T23:59:59.000Z

268

Inductive gas line for pulsed lasers  

DOE Patents [OSTI]

A gas laser having a metal inlet gas feed line assembly shaped as a coil, to function as an electrical inductance and therefore high impedance to pulses of electric current applied to electrodes at opposite ends of a discharge tube of a laser, for example. This eliminates a discharge path for the laser through the inlet gas feed line. A ferrite core extends through the coil to increase the inductance of the coil and provide better electric isolation. By elimination of any discharge breakdown through the gas supply, efficiency is increased and a significantly longer operating lifetime of the laser is provided.

Benett, W.J.; Alger, T.W.

1982-09-29T23:59:59.000Z

269

Straight-line separation of two polyhedra  

E-Print Network [OSTI]

STRAIGHT-LINE SEPARATION OF TWO POLYHEDRA A Thesis by SU-HUA WANG Submitted to the Office of Graduate Studies of Texas ARM University in partial fulfillment of the requirements for the degree of MASTER OF SCIENCE December 1992 Major Subject...: Computer Science STRAIGHT-LINE SEPARATION OF TWO POLYHEDRA A Thesis by SU-HUA WANG Approved as to style and content by: Jan Wolter hair of Committee) Donald K. Friesen (Member) esa O. alav ( ember) Richard A, Volz (Head of Department) December...

Wang, Su-Hua

1992-01-01T23:59:59.000Z

270

An analysis of multiple component mooring lines  

E-Print Network [OSTI]

-5 Tension At Excursion Parameter Response--Weight Parameter 0. 2; Pretension Parameter 16 38 6-6 Line Length Parameter Response-- Weight Parameter 0. 2; Pretension Parameter 16 39 6-7 Excursion Parameter Response-- Weight Parameter 0. 2; Pretension... Parameter 2 40 6-8 Anchor Load Parameter Response-- Weight Parameter 0. 2; Pretension Parameter 2 41 6-9 Tension At Excursion Parameter Response--Weight Parameter 0. 2; Pretension Parameter 2 6-'I 0 Line Length Parameter Response-- Weight Parameter 0...

Walters, Thomas Robert

1977-01-01T23:59:59.000Z

271

EC Transmission Line Risk Identification and Analysis  

SciTech Connect (OSTI)

The purpose of this document is to assist in evaluating and planning for the cost, schedule, and technical project risks associated with the delivery and operation of the EC (Electron cyclotron) transmission line system. In general, the major risks that are anticipated to be encountered during the project delivery phase associated with the implementation of the Procurement Arrangement for the EC transmission line system are associated with: (1) Undefined or changing requirements (e.g., functional or regulatory requirements) (2) Underperformance of prototype, first unit, or production components during testing (3) Unavailability of qualified vendors for critical components Technical risks associated with the design and operation of the system are also identified.

Bigelow, Tim S [ORNL

2012-04-01T23:59:59.000Z

272

Ionization Chambers in the FLASH Dump Line  

E-Print Network [OSTI]

. 7, 2010FLASH Seminar, Dec. 7, 2010 BPM 13DUMP Dump Line Upgrade 2009Dump Line Upgrade 2009 BPM 9DUMP BPM 5DUMP Toroid 9DUMP OTR screen 9DUMP BLM 14DUMP BLM 13.1DUMP 13.2DUMP BLM 9DUMP BLM 6DUMP BLM 1.1DUMP 1.2DUMP BPM 10DUMP BPM 16DUMP 8 x BHM 16DUMP BLM 14R.DUMP 14L.DUMP 14U.DUMP 14D.DUMP Ionization

273

LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES  

SciTech Connect (OSTI)

This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and testing of Planar Single Cells. This period has continued to address the problem of making dense 1/2 to 5 {micro}m thick dense layers on porous substrates (the cathode LSM). Our current status is that we are making structures of 2-5 cm{sup 2} in area, which consist of either dense YSZ or CGO infiltrated into a 2-5 {micro}m thick 50% porous layer made of either nanoncrystalline CGO or YSZ powder. This composite structure coats a macroporous cathode or anode; which serves as the structural element of the bi-layer structure. These structures are being tested as SOFC elements. A number of structures have been evaluated both as symmetrical and as button cell configuration. Results of this testing indicates that the cathodes contribute the most to cell losses for temperatures below 750 C. In this investigation different cathode materials were studied using impedance spectroscopy of symmetric cells and IV characteristics of anode supported fuel cells. Cathode materials studied included La{sub 0.8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (LSCF), La{sub 0.7}Sr{sub 0.2}MnO{sub 3} (LSM), Pr{sub 0.8}Sr{sub 0.2}Fe{sub 0.8}O{sub 3} (PSCF), Sm{sub 0.8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (SSCF), and Yb{sub .8}Sr{sub 0.2}Co{sub 0.2}Fe{sub 0.8}O{sub 3} (SSCF). A new technique for filtering the Fourier transform of impedance data was used to increase the sensitivity of impedance analysis. By creating a filter specifically for impedance spectroscopy the resolution was increased. The filter was tailored to look for specific circuit elements like R//C, Warburg, or constant phase elements. As many as four peaks can be resolved using the filtering technique on symmetric cells. It may be possible to relate the different peaks to material parameters, like the oxygen exchange coefficient. The cathode grouped in order from lowest to highest ASR is LSCF < PSCF < SSCF < YSCF < LSM. The button cell results agree with this ordering indicating that this is an important tool for use in developing our understanding of electrode behavior in fuel cells.

Harlan U. Anderson; Fatih Dogan; Vladimir Petrovsky

2002-03-31T23:59:59.000Z

274

LOW TEMPERATURE CATHODE SUPPORTED ELECTROLYTES  

SciTech Connect (OSTI)

This project has three main goals: Thin Films Studies, Preparation of Graded Porous Substrates and Basic Electrical Characterization and testing of Planar Single Cells. During this time period substantial progress has been made in developing low temperature deposition techniques to produce dense, nanocrystalline yttrium-stabilized zirconia films on both dense oxide and polymer substrates. Microstructural changes in unsupported nanocrystalline yttrium stabilized zirconia (ZrO{sub 2}:16%Y, or YSZ) thin films were examined as a function of temperature and annealing time in order to determine the grain growth exponent and the mechanisms of pinhole formation. Grain growth and pinhole formation were measured using high resolution transmission electron microscopy (HRTEM), normal imaging mode transmission electron microscopy (TEM), electron diffraction, and energy dispersive X-ray microanalysis (EDS). Grain growth was found to vary with a time exponent of about one half before pinhole formation and about one third after. Pinhole formation in 70 nm thick films occurred at temperatures near 600 C, corresponding to a grain size of about 15 nm, or a grain size to film thickness ration of approximately 0.25. The deposition of films on porous substrates is hampered by the penetration of the polymer precursor solution into the substrate whose pores as > 0.2 {micro}m, therefore much attention has to be paid to the development of porous colloidal oxide films onto surfaces. Thus during this line period we have been studying these films. Optical properties have proven to be an excellent way to study the quality of these nanoporous films. The influence of porosity and densification on optical properties of films on sapphire substrates that were prepared from water colloidal suspensions of small ({approx}5nm) particles of ceria was investigated. The colloidal ceria films have initially very porous structure (porosity about 50%) and densification starts at about 600 C accompanied by grain growth. The concurrence of these two processes makes it difficult to interpret the results of the optical spectrophotometry, but the combination of transmittance and reflectance measurements provides enough data to separate these two influences and to calculate the porosity, particle size and energy band gap separately. XRD, SEM, ellipsometry and mechanical profilometry were used to confirm the results obtained from the spectrophotometric measurements. All these methods gave results, which are in good agreement: the change in the porosity from 50% to 15% and the particle size increased from 5 to 65nm in the temperature region from 400 to 1000 C. An important result of the investigation is the fact that the main optical properties of the coating such as refractive index and band gap energy depend only on the porosity, but not on the grain size. The grain size influences the scattering properties of the coating, which allows the grain size to be estimated from optical measurements.

Harlan U. Anderson; Wayne Huebner; Igor Kosacki

2000-09-30T23:59:59.000Z

275

New Construction of Distribution Lines, Service Lines, and Appurtenant Facilities in Certain Visually Significant Resources Outside Residential Subdivisions (New York)  

Broader source: Energy.gov [DOE]

Any proposed construction of distribution lines, service lines, and appurtenant facilities to electric utilities located near scenic areas of statewide significance, including Adirondack park...

276

Locking support for nuclear fuel assemblies  

DOE Patents [OSTI]

A locking device for supporting and locking a nuclear fuel assembly within a cylindrical bore formed by a support plate, the locking device including a support and locking sleeve having upwardly extending fingers forming wedge shaped contact portions arranged for interaction between an annular tapered surface on the fuel assembly and the support plate bore as well as downwardly extending fingers having wedge shaped contact portions arranged for interaction between an annularly tapered surface on the support plate bore and the fuel assembly whereby the sleeve tends to support and lock the fuel assembly in place within the bore by its own weight while facilitating removal and/or replacement of the fuel assembly.

Ledin, Eric (San Diego, CA)

1980-01-01T23:59:59.000Z

277

Semi-flexible gas-insulated transmission line using protection tube in conductor plug-in joint  

DOE Patents [OSTI]

A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. A plug and socket arrangement is utilized for joining adjacent sections of the inner conductor, and a protection tube is utilized inside the hollow plug to maintain proper alignment of the joint when the transmission line is bent. 3 figs.

Kommineni, P.R.

1983-01-25T23:59:59.000Z

278

Semi-flexible gas-insulated transmission line using electric field stress shields  

DOE Patents [OSTI]

A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by use of main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. The flexing elements and the stress shields may also be utilized in connection with a plug and socket arrangement for providing electrical connection between main conductor sections. 10 figs.

Cookson, A.H.; Dale, S.J.; Bolin, P.C.

1982-12-28T23:59:59.000Z

279

Semi-flexible gas-insulated transmission line using sandwiched discs for intermittent flexing joints  

DOE Patents [OSTI]

A gas-insulated transmission line includes an outer sheath, an inner conductor, an insulating gas electrically insulating the inner conductor from the outer sheath, and insulating supports insulatably supporting the inner conductor within the outer sheath. The inner conductor is provided with flexibility by the use of main conductor sections which are joined together through a conductor hub section and flexible flexing elements. Stress shields are provided to control the electric field at the locations of the conductor hub sections where the insulating supports are contacting the inner conductor. The flexing elements are formed by sandwiching together, by fusing, a pair of thin hollow discs which are fixedly secured to both the main conductor sections and the conductor hub section. 4 figs.

Kommineni, P.R.

1983-02-15T23:59:59.000Z

280

Clean Cities Regional Support & Petroleum Displacement Awards  

Broader source: Energy.gov (indexed) [DOE]

Clean Cities Regional Support & Petroleum Displacement Awards Mike Scarpino & Kay Kelly National Energy Technology Laboratory 052009 This presentation does not contain any...

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Office of Environmental Protection, Sustainability Support &...  

Energy Savers [EERE]

issues and concerns. Provides recommendations to the Deputy Chief for Mission Support Operations regarding requests for waivers of the requirement to conduct Type A or Type B...

282

Supporting Information Wiley-VCH 2005  

E-Print Network [OSTI]

-isopropylphenoxy)acetyl-2-O-tBDMS-guanosine; the corresponding 1000-? CPG supports; 5-ethylthio-1H-tetrazole

Silverman, Scott K.

283

Modular power converter having fluid cooled support  

DOE Patents [OSTI]

A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

2005-09-06T23:59:59.000Z

284

Modular power converter having fluid cooled support  

DOE Patents [OSTI]

A support may receive one or more power electronic circuits. The support may aid in removing heat from the circuits through fluid circulating through the support. The support, in conjunction with other packaging features may form a shield from both external EMI/RFI and from interference generated by operation of the power electronic circuits. Features may be provided to permit and enhance connection of the circuitry to external circuitry, such as improved terminal configurations. Modular units may be assembled that may be coupled to electronic circuitry via plug-in arrangements or through interface with a backplane or similar mounting and interconnecting structures.

Beihoff, Bruce C.; Radosevich, Lawrence D.; Meyer, Andreas A.; Gollhardt, Neil; Kannenberg, Daniel G.

2005-12-06T23:59:59.000Z

285

Critical Mission Support Through Energy Security  

Broader source: Energy.gov [DOE]

Presentation covers the critical mission support through energy security and is given at the Spring 2010 Federal Utility Partnership Working Group (FUPWG) meeting in Rapid City, South Dakota.

286

Meteorological Support at the Savanna River Site  

SciTech Connect (OSTI)

The Department of Energy (DOE) operates many nuclear facilities on large complexes across the United States in support of national defense. The operation of these many and varied facilities and processes require meteorological support for many purposes, including: for routine operations, to respond to severe weather events, such as lightning, tornadoes and hurricanes, to support the emergency response functions in the event of a release of materials to the environment, for engineering baseline and safety documentation, as well as hazards assessments etc. This paper describes a program of meteorological support to the Savannah River Site, a DOE complex located in South Carolina.

Addis, Robert P.

2005-10-14T23:59:59.000Z

287

Modularization to Support Multiple Brand Platforms  

E-Print Network [OSTI]

Methods to determine acceptable architecture for multiple platforms supporting multiple brands must represent both platform cost saving commonization as well as revenue enhancing brand distinctions. Functional architecting ...

Agus, Sudjianto

2001-09-09T23:59:59.000Z

288

ADAPTIVE CONSTRAINT REDUCTION FOR TRAINING SUPPORT ...  

E-Print Network [OSTI]

linear feasibility problems, and Luo and Sun [LS98] proposed a similar scheme for convex quadratic ...... LIBSVM: a library for support vector machines, 2001.

2007-11-29T23:59:59.000Z

289

Categorical Exclusion 4565, Waste Management Construction Support  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

FornI Project Title: Waste Management Construction Support (4565) Program or Program Office: Y -12 Site Office Location: Oak Ridge Tennessee Project Description: This work scope is...

290

Dielectronic recombination lines of C{sup +}  

SciTech Connect (OSTI)

The present paper presents atomic data generated to investigate the recombination lines of C II in the spectra of planetary nebulae. These data include energies of bound and autoionizing states, oscillator strengths and radiative transition probabilities, autoionization probabilities, and recombination coefficients. The R-matrix method of electron scattering theory was used to describe the C{sup 2+} plus electron system.

Sochi, Taha, E-mail: taha.sochi@kcl.ac.uk; Storey, Peter J.

2013-11-15T23:59:59.000Z

291

On line chemical composition of analyzer development  

SciTech Connect (OSTI)

This status report details progress made on the development of an on-line chemical analyzer. Dynamic studies of the distillation column, approval of testing plans, installation of a sample cell and raman analyzer, design of computerized control systems are described. Information on seminars and published papers is also included. (GHH)

Not Available

1992-01-01T23:59:59.000Z

292

High temperature lined conduits, elbows and tees  

DOE Patents [OSTI]

A high temperature lined conduit comprising, a liner, a flexible insulating refractory blanket around and in contact with the liner, a pipe member around the blanket and spaced therefrom, and castable rigid refractory material between the pipe member and the blanket. Anchors are connected to the inside diameter of the pipe and extend into the castable material. The liner includes male and female slip joint ends for permitting thermal expansion of the liner with respect to the castable material and the pipe member. Elbows and tees of the lined conduit comprise an elbow liner wrapped with insulating refractory blanket material around which is disposed a spaced elbow pipe member with castable refractory material between the blanket material and the elbow pipe member. A reinforcing band is connected to the elbow liner at an intermediate location thereon from which extend a plurality of hollow tubes or pins which extend into the castable material to anchor the lined elbow and permit thermal expansion. A method of fabricating the high temperature lined conduit, elbows and tees is also disclosed which utilizes a polyethylene layer over the refractory blanket after it has been compressed to maintain the refractory blanket in a compressed condition until the castable material is in place. Hot gases are then directed through the interior of the liner for evaporating the polyethylene and setting the castable material which permits the compressed blanket to come into close contact with the castable material.

De Feo, Angelo (Passaic, NJ); Drewniany, Edward (Bergen, NJ)

1982-01-01T23:59:59.000Z

293

The Bottom Line Space@Penn Upgrade  

E-Print Network [OSTI]

The Bottom Line Space@Penn Upgrade Coming Soon! A project is underway to upgrade the current that allows designated users in the field to update certain elements of their space. This project, whose: Grants & Projects ­ Used for invoice generation, overhead and revenue recognition, and award and project

Sharp, Kim

294

Modeling Product Line Architectures through Change Sets  

E-Print Network [OSTI]

architecture (PLA) § Software architecture for product line · Single, monolithic architecture for multiple products · Variation points to differentiate among products 3/17 KAIST SE LAB 2010 PLA > Engineer or guard PLA PLA PLA Engineer or guard Engineer or guard Change set & Relation Change set

Bae, Doo-Hwan

295

Community Trees Power Lines and Trees  

E-Print Network [OSTI]

aesthetic and psychological benefits. Figure 2. Grown into a power pole. #12;become hazardous to peopleCommunity Trees Power Lines and Trees Introduction Trees serve many purposes in urban and rural, hundreds of people throughout the United States are injured or killed each year when they climb or prune

Koford, Rolf R.

296

Geomembranes for Canal Lining Geosynthetics 2009  

E-Print Network [OSTI]

for this application including PVC, HDPE, LDPE, CSPE, and EPDM geomembranes. Frequently these geomembranes require for canal liners based on field test programs. The first such test program was started with a PVC test to evaluate the effectiveness of a range of canal lining alternatives. Traditionally, PVC geomembranes have

297

Tassel Pipeline Tutorial (Command Line Interface)  

E-Print Network [OSTI]

Tassel Pipeline Tutorial (Command Line Interface) Terry Casstevens Institute for Genomic Diversity, Cornell University May 11, 2011 #12;Tassel Pipeline Basics... · Consists of Modules (i.e. Plugins) · Output from one Module can be Input to another Module. Determined by order specified. run_pipeline

Buckler, Edward S.

298

Berkeley Off-line Radioisotope Generator (BORG)  

SciTech Connect (OSTI)

Development of chemical separations for the transactinides has traditionally been performed with longer-lived tracer activities purchased commercially. With these long-lived tracers, there is always the potential problem that the tracer atoms are not always in the same chemical form as the short-lived atoms produced in on-line experiments. This problem is especially severe for elements in groups 4 and 5 of the periodic table, where hydrolysis is present. The long-lived tracers usually are stored with a complexing agent to prevent sorption or precipitation. Chemistry experiments performed with these long-lived tracers are therefore not analogous to those chemical experiments performed in on-line experiments. One way to eliminate the differences between off-line and on-line chemistry experiments is through the use of a {sup 252}Cf fission fragment collection device. A {sup 252}Cf fission fragment collection device has already been constructed [1]. This device is limited in its capabilities. A new fission fragment device would allow the study of the chemical properties of the homologues of the heaviest elements. This new device would be capable of producing fission fragments for fast gas chemistry and aqueous chemistry experiments, long-lived tracers for model system development and neutrons for neutron activation. Fission fragment activities produced in this way should have the same chemical form as those produced in Cyclotron irradiations. The simple operation of this source will allow more rapid and reliable development of radiochemical separations with homologues of transactinide elements.

Sudowe, Ralf; Patin, Joshua B.

2001-07-23T23:59:59.000Z

299

The Arctic Tree Line and Climate Change  

E-Print Network [OSTI]

­ Compared the spruce treeline between 1947 and 1989 ­ Used remote sensing applications ­ Mean temperature cover - Causes surface heating Forest Tundra Chapin et al., (2005), 10 Nadezhda et al., (2008) Albedo) ­Heating effect exceeds cooling effect ­Advances in the tree line are causing global warming to occur even

Blouin-Demers, Gabriel

300

Deployment Support Leading to Implementation  

SciTech Connect (OSTI)

The following paragraphs summarize the progress of each research project funded under the WVU Cooperative Agreement during the third quarter of 1997 (July - September 1997). The projects are arranged according to their 1997 WVU task number. WVU Focus Area 1.0: Subsurface Contaminants, Containment and Remediation Task No. 1.1: Project discontinued. Task No. 1.2: Development of Standard Test Protocols and Barrier Design Models for Desiccation Barriers (K. Amininan & S. Ameri): A number of experiments were preformed this period to evaluate the ability of the dried sand-packs to act as a barrier to liquids. Water infiltration tests were done with a constant head, dispersing 80 ml of water, and by adding water in small increments. Results indicate that when the water is spilled over the sand-pack, it has the tendency to channel through the sand-pack, significantly reducing the capacity of the dried zone to retain liquid contaminants. This appears to be largely influenced by particle size. As the particle size is reduced, the capillary forces spread the water and prevent/delay channels from forming. The measured permeability values were in agreement with those measured with air. The water retention capacity and capillary rise were largely influenced by time and showed no sensitivity to channeling. The water retention capacity tests suggest the sand-packs can retain more water than the expected. Two sets of water infiltration and drying experiments were designed to evaluate the CAB?s ability to prevent spills from spreading. Ten ml of water was injected every 20 minutes and 80 ml of water was added at one time. When injected slowly, results showed the drying process to be similar to the original drying process. The second set indicted the drying process follows a slowly declining drying with no break through. Results also suggested that air flow through the sand-pack can remove water infiltration. The air flow appeared to prevent any water channeling and thus should cause lateral distribution of the water. The large tank that accommodates the sand bed and the necessary plumbing to simulate various well configurations was received. The monitoring equipment and the sensors are currently being installed. The experimental procedures for Phase II experiments are under further investigation and will be initiated upon installation of CATC and assembly of the monitoring system. Due to insufficient operating funds, the large scale experiments will not be done this year. Task No. 1.3: Technical Support - Development of Standard Test Protocols and Barrier Design Models for In Situ Formed Barriers (B. Overbey & D. Locke, BDM Federal): The Operating Permit Renewal Request for bench scale operations in the FETC B-17 building was submitted to the FETC Lab Safety Committee for approval on 8/14/97. A review of the revised NEPA documents prepared last year indicates that these documents are still applicable for the current work. The initial design and specifications for the CATC vessel were prepared. Construction of the CATC was initiated in early July, the vessel was received August 15, 1997, and on-site work was completed this quarter.

E. E. Cook

1997-10-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Student Support-Radiochemistry Conference  

SciTech Connect (OSTI)

The objectives of this program were to provide bursaries to assist students and post-doctoral fellows being trained in radiochemistry to actively participate in the 18th International Symposium in Radiopharmaceutical Sciences (ISRS-2009) held in Edmonton, Canada on July 12-19, 2009. The critical shortage of scientists in the U.S. trained radiochemistry and imaging scientists is well documented. Scientific meetings such as ISRS-2009 provide an outstanding opportunity to recruit active researchers and trainees in a venue that can inspire and mentor them to join the next generation of radiochemical scientists. The ISRS-2009 was particularly important in this meeting this objective since it is regarded as the premier international meeting that features investigators from across the globe involved in cutting-edge research to synthesize and characterize radiolabeled biomolecules for molecular imaging in living systems. For example, radiochemistry and radionuclide imaging scientists presented new approaches and technologies for synthesis of novel radiolabeled biomolecules with PET (including, 11C and 18F) and SPECT (including 99mTc and 111In). The radiochemical and radionuclide imaging research presented at the ISRS-2009 are directly related to and supportive of the biomolecular radioisotope, radiochemistry and imaging programs in the DOE, Office of Science (BER). There were a total of fifteen students or post-doctoral fellows from a variety of radiochemistry and radionuclide imaging research and educational institutions from across the country (Table 1). Announcements of the SRS/DOE bursary award program were made on the ISRS-2009 meeting web site (www.ISRS18.com), on the SRS website (www.srsweb.org), and via SRS email blasts (announcement Figure 1). The applications were reviewed and awardees selected by a committee composed of Dr. Ken Krohn, University of Washington, Seattle, WA, Dr. William Eckelman, Bethesda, MD,Dr. Michael Welch, Washington University, St. Louis, MO and Dr. Wynn Volkert, University of Missouri, Columbia, MO. The trainees presented results of their work via either an oral or a poster presentation. Abstracts of their papers presented at the ISRS-2009 meeting were published in the Journal of Labelled Compounds and Radiopharmaceuticals, Volume 52, Supplement 1, 2009 (www.interscience.wiley.com/journal/jier), the official Abstract Book for the ISRS-2009 meeting. A copy of the published abstracts presented by each of the fifteen trainees receiving the SRS/DOE Bursary Award is provided on the following pages. The list of the fifteen trainees receiving the 2009 Bursary awards funded by this DOE grant was published in the July 2010 issue of Nuclear Medicine and Biology (Volume 37(5), July 2010) and in the SRS website with appropriate acknowledgement to the U.S. Department [See Appendix 1 for copies of the 15 student/trainee abstracts].

Wynn Volkert, PhD; Victoria (Nikki) Wenzel-Lamb, MBA

2009-09-01T23:59:59.000Z

302

Supporting information for: Na-doped p-type ZnO , Faxian Xiu2  

E-Print Network [OSTI]

S1 Supporting information for: Na-doped p-type ZnO microwires Wei Liu1* , Faxian Xiu2 , Ke Sun1 flow was switched to argon followed by cooling to room temperature. After the growth, high-density Zn distribution of the Na Doped ZnO microwire 1.3 EDX line scans spectra #12;S3 Figure S3 a) a typical TEM image

Yang, Zheng

303

HWMA/RCRA Closure Plan for the CPP-602 Laboratory Lines  

SciTech Connect (OSTI)

This Hazardous Waste Management Act/Resource Conservation and Recovery Act Closure (HWMA/RCRA) Plan for the CPP-602 laboratory lines was developed to meet the tank system closure requirements of the Idaho Administrative Procedures Act 58.01.05.008 and 40 Code of Federal Regulations 264, Subpart G. CPP-602 is located at the Idaho Nuclear Technology and Engineering Center at the Idaho National Laboratory Site. The lines in CPP-602 were part of a liquid hazardous waste collection system included in the Idaho Nuclear Technology and Engineering Center Liquid Waste Management System Permit. The laboratory lines discharged to the Deep Tanks System in CPP-601 that is currently being closed under a separate closure plan. This closure plan presents the closure performance standards and the methods for achieving those standards. The closure approach for the CPP-602 laboratory lines is to remove the lines, components, and contaminants to the extent practicable. Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Site CPP-117 includes the CPP-602 waste trench and the area beneath the basement floor where waste lines are direct-buried. Upon completion of rinsing or mopping to remove contamination to the extent practicable from the waste trench and rinsing the intact buried lines (i.e., stainless steel sections), these areas will be managed as part of CERCLA Site CPP-117 and will not be subject to further HWMA/RCRA closure activities. The CPP-602 building is being decontaminated and decommissioned under CERCLA as a non-time critical removal action in accordance with the Federal Facility Agreement/Consent Order. As such, all waste generated by this CERCLA action, including closure-generated waste, will be managed in coordination with that CERCLA action in substantive compliance with HWMA/RCRA regulations. All waste will be subject to a hazardous waste determination for the purpose of supporting appropriate management and will be managed in accordance with this plan. ii

Idaho Cleanup Project

2009-09-30T23:59:59.000Z

304

Thermal Performance of the Supporting System for the Large Hadron Collider (LHC) Superconducting Magnets  

E-Print Network [OSTI]

The LHC collider will be composed of approximately 1700 main ring superconducting magnets cooled to 1.9 K in pressurised superfluid helium and supported within their cryostats on low heat in-leak column-type supports. The precise positioning of the heavy magnets and the stringent thermal budgets imposed by the machine cryogenic system, require a sound thermo-mechanical design of the support system. Each support is composed of a main tubular thin-walled structure in glass-fibre reinforced epoxy resin, with its top part interfaced to the magnet at 1.9 K and its bottom part mounted onto the cryostat vacuum vessel at 293 K. In order to reduce the conduction heat in-leak at 1.9 K, each support mounts two heat intercepts at intermediate locations on the column, both actively cooled by cryogenic lines carrying helium gas at 4.5-10 K and 50-65 K. The need to assess the thermal performance of the supports has lead to setting up a dedicated test set-up for precision heat load measurements on prototype supports. This pa...

Castoldi, M; Parma, Vittorio; Vandoni, Giovanna

1999-01-01T23:59:59.000Z

305

TRIBAND BRANCH LINE COUPLER USING DOUBLE-LORENTZ  

E-Print Network [OSTI]

TRIBAND BRANCH LINE COUPLER USING DOUBLE-LORENTZ TRANSMISSION LINES Hanseung Lee and Sangwook Nam) transmission lines (TL) provides two additional degrees of freedom in realizing triband microwave devices-Lorentz; transmission lines; triband; directional couplers 1. INTRODUCTION The concept of artificial TLs having

Nam, Sangwook

306

EU Blanket Design Activities and Neutronics Support Efforts  

SciTech Connect (OSTI)

An overview is provided of the design activities and the related neutronics support efforts conducted in the European Union for the development of breeder blankets for future fusion power reactors. The EU fusion programme considers two blanket lines, the Helium-Cooled Pebble Bed (HCPB) blanket with Lithium ceramics pebbles (Li{sub 4}SiO{sub 4} or Li{sub 2}TiO{sub 3}) as breeder and beryllium pebbles as neutron multiplier, and the Helium-Cooled Lithium-Lead (HCLL) blanket with the Pb-Li eutectic alloy as breeder and neutron multiplier. The blanket design and the related R and D efforts are based on the use of the same coolant and the same modular blanket structure to minimise the development costs as much as possible. The neutronic support efforts include design analyses for the layout and optimization of the modular HCPB/HCLL blankets based on detailed three-dimensional Monte Carlo calculations as well as underlying neutronics activities conducted in the frame of the European Fusion and Activation File (EFF/EAF) projects to develop qualified nuclear data and computational tools for reliable neutronics design calculations.

Fischer, U. [Forschungszentrum Karlsruhe (Germany); Batistoni, P. [ENEA Fusion Division (Italy); Boccaccini, L.V. [Forschungszentrum Karlsruhe (Germany); Giancarli, L. [CEA Saclay (France); Hermsmeyer, S. [Forschungszentrum Karlsruhe (Germany); Poitevin, Y. [CEA Saclay (France)

2005-05-15T23:59:59.000Z

307

EPR Line Shifts and Line Shape Changes due to Spin Exchange of Nitroxide Free Radicals in Liquids: 6. Separating Line Broadening due to Spin Exchange and Dipolar Interactions  

E-Print Network [OSTI]

EPR Line Shifts and Line Shape Changes due to Spin Exchange of Nitroxide Free Radicals in Liquids 23, 2008; ReVised Manuscript ReceiVed: January 12, 2009 EPR spectra of perdeuterated 2

Bales, Barney

308

DOE Selects 8(a) Small Business for Technical Support Services...  

Office of Environmental Management (EM)

Support Cleanup of New York West Valley Demonstration Project DOE Awards Support Service Contract DOE Awards Small Business Contract for Support, Planning Services to Office of...

309

DOE Awards Small Business Task Order for Technical Support to...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Contract Awarded to Small Business for Support Services DOE Awards Support Service Contract DOE Awards Small Business Task Order for Technical Support to the Office of...

310

PIA - WEB Unclassified Business Operations General Support System...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support System PIA - WEB Unclassified Business Operations General Support...

311

Extending Programming Environments to Support Architectural Design  

E-Print Network [OSTI]

environments are tightly integrated tool sets that support the production of source code in a programming, debugging, and source code browsing. These en­ vironments, however, do not necessarily support nota­ tions of programming environments 1 include Smalltalk [11] and Interlisp [28] from Xerox Parc, In­ tegral C [25] from

Holt, Richard C.

312

Support at MMU A Guide for  

E-Print Network [OSTI]

Support at MMU A Guide for Disabled Students and Students with Dyslexia #12;Access Summit Joint 10 Disclosure of disability 10 What is medical evidence 12 Dyslexia and other specific learning learning difficulties, such as dyslexia have appropriate study related support. This guide provides

313

| 2013 Computer Science62 Advice and support  

E-Print Network [OSTI]

| 2013 Computer Science62 Advice and support for students Scholarships and prizes 53 Computerfacilitiesandlabs 55 Student support services 56 #12;Scholarships and prizes Computer Science students-Tick Scholarships for Postgraduate Study in Computer Science Awarded to two students taking a Bachelor of Science

Sun, Jing

314

| 2012 Computer Science62 Advice and support  

E-Print Network [OSTI]

| 2012 Computer Science62 Advice and support for students Scholarships and prizes 53 Computerfacilitiesandlabs 55 Student support services 56 #12;Scholarships and prizes Computer Science students of the best 60 points in Stage III Computer Science courses for that year. Computer Science Annual Prize 2010

Sun, Jing

315

IT Support for Sustainable Development in Organizations  

E-Print Network [OSTI]

IT Support for Sustainable Development in Organizations Andreas Moeller and Arno Rolf Leuphana phase of sustainable development, as well as their contributions to modified or new generalized action in economics) and systemic mechanisms. With respect to sustainable development, new concepts supporting

Paris-Sud XI, Universit de

316

Solar collector mounting and support apparatus  

SciTech Connect (OSTI)

A solar collector system is described of the type having a movable surface for receiving solar radiation having improved means for rotatably supporting the movable surface and for rotating the collector surface. A support axle for the collector includes a ball at one end which is carried within a cylindrical sleeve in the solar collector to support the weight of the collector. A torque transmitting arm comprising a flexible flat strip is connected at one end to the axle and at the other end to the collector surface. An improved rotational drive mechanism includes a first sprocket wheel carried on the axle and a second sprocket wheel supported on a support pylon with a drive chain engaging both sprockets. A double acting piston also supported by the pylon is coupled to the chain so that the chain may be driven by a hydraulic control system to rotate the collector surfaces as required. An improved receiver tube support ring is also provided for use with the improved mounting and support apparatus to improve overall efficiency by reducing thermal losses.

Hutchison, J.A.

1981-12-22T23:59:59.000Z

317

Metal-supported solid oxide fuel cells  

SciTech Connect (OSTI)

Low cost, colloidal deposition methods have been utilized to produce novel solid oxide fuel cell structures on metal alloy support electrodes. YSZ films were deposited on iron-chrome supports on top of a thin Ni/YSZ catalytic layer, and sintered at 1350 degrees C, in a reducing atmosphere. Dense, 20??m YSZ electrolyte films were obtained on highly porous stainless steel substrates.

Villarreal, I.; Jacobson, C.; Leming, A.; Matus, Y.; Visco, S.; De Jonghe, L.

2003-01-07T23:59:59.000Z

318

Reliable Distributed Computing for Decision Support Systems  

E-Print Network [OSTI]

Reliable Distributed Computing for Decision Support Systems Taha Osman, Andrzej Bargiela Department of application tasks on the currently avail- able computing nodes. Distributed Systems Reliability Due decision-support systems such as water distribution net- works, involving hundreds or even thousands

Bargiela, Andrzej

319

you'll be encouraged and supported  

E-Print Network [OSTI]

for your wellbeing. Our teachers are always available to help you get to know the Australian culture and to provide advice for your transition into tertiary study. Learning support You are here to learn. That's why each of our programs includes a support system, matched to your academic level, designed to help your

Albrecht, David

320

QUEEN'S UNIVERSITY BELFAST Student Support Fund Framework  

E-Print Network [OSTI]

that it continues to comply with best practice and the Department for Employment and Learning (NI) Support Funds of awards made will be dependent upon a number of factors including demand made on the fund each year shortfall, being claimed, is unexpected. 3. Roles and Responsibilities 3.1 There is a Student Support Fund

Paxton, Anthony T.

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Money Advice & Support Office Statement of Service  

E-Print Network [OSTI]

Money Advice & Support Office Statement of Service Aim The Money Advice & Support Office (MASO becomes critical. Financial literacy education project under the `Money Doctors' title including advice checked and updated: o Email: MoneyDoctors@swansea.ac.uk o Web: http://www.swan.ac.uk/undergraduate/fees-and-funding/money

Martin, Ralph R.

322

G1 Account: Guest Account Supporting Documentation  

E-Print Network [OSTI]

G1 Account: Guest Account Supporting Documentation Phone: 202-994-7900 Fax: 202-994-4747 Email: acadtech@gwu.edu Web: http://acadtech.gwu.edu Supporting Documentation: Based on your role, please provide the Special Account Request Form along with reservation documentation from the Office of Academic Scheduling

Vertes, Akos

323

Vane segment support and alignment device  

DOE Patents [OSTI]

A support and alignment assembly for supporting and aligning a vane segment is provided. The support and alignment assembly comprises a torque plate which defines an opening for receiving an eccentric pin and a locking end member for receiving a lock socket member. An eccentric pin adjustably supported by the torque plate opening for supporting and aligning a vane segment is provided. A lock socket member adapted to securely receive the eccentric pin and rotated therewith, and adjustably engage the torque plate locking end is provided. The lock socket member receives the eccentric pin, such that when the eccentric pin is adjusted to align the vane segment, the lock socket member engages the torque plate locking end to secure the vane segment in the desired position. 5 figs.

McLaurin, L.D.; Sizemore, J.D.

1999-07-13T23:59:59.000Z

324

Web Strategies Support Center Guide Login to Web Strategies Support Center 2  

E-Print Network [OSTI]

Web Strategies Support Center Guide Login to Web Strategies Support Center 2 Create New Requests 3 View Requests 5 Email Notification 6 Login to JIRA 7 View Ticket in JIRA 8 #12;Login to Web Strategies

Chapman, Michael S.

325

Second Line of Defense Master Spares Catalog  

SciTech Connect (OSTI)

This catalog is intended to be a comprehensive listing of repair parts, components, kits, and consumable items used on the equipment deployed at SLD sites worldwide. The catalog covers detection, CAS, network, ancillary equipment, and tools. The catalog is backed by a Master Parts Database which is used to generate the standard report views of the catalog. The master parts database is a relational database containing a record for every part in the master parts catalog along with supporting tables for normalizing fields in the records. The database also includes supporting queries, database maintenance forms, and reports.

Henderson, Dale L.; Muller, George; Mercier, Theresa M.; Brigantic, Robert T.; Perkins, Casey J.; Cooley, Scott K.

2012-11-20T23:59:59.000Z

326

In-line real time air monitor  

DOE Patents [OSTI]

An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds.

Wise, Marcus B. (Kingston, TN); Thompson, Cyril V. (Knoxville, TN)

1998-01-01T23:59:59.000Z

327

In-line real time air monitor  

DOE Patents [OSTI]

An in-line gas monitor capable of accurate gas composition analysis in a continuous real time manner even under strong applied vacuum conditions operates by mixing an air sample with helium forming a sample gas in two complementary sample loops embedded in a manifold which includes two pairs of 3-way solenoid valves. The sample gas is then analyzed in an ion trap mass spectrometer on a continuous basis. Two valve drivers actuate the two pairs of 3-way valves in a reciprocating fashion, so that there is always flow through the in-line gas monitor via one or the other of the sample loops. The duty cycle for the two pairs of 3-way valves is varied by tuning the two valve drivers to a duty cycle typically between 0.2 to 0.7 seconds. 3 figs.

Wise, M.B.; Thompson, C.V.

1998-07-14T23:59:59.000Z

328

ADHM Revisited: Instantons and Wilson Lines  

E-Print Network [OSTI]

We revisit the well-studied D0-D4 system of D-branes and its relationship to the ADHM construction. It is well known that the D0-branes appear as instantons in the D4-brane worldvolume. We add a Wilson line to the D4-brane in the guise of an extended fundamental string and determine how this affects the D0-brane dynamics. As the D0-brane moves in the presence of the Wilson line, it experiences a Lorentz force, proportional to its Yang-Mills gauge connection. From the perspective of the D0-brane quantum mechanics, this force emerges through the ADHM construction of the self-dual gauge connection.

David Tong; Kenny Wong

2014-10-30T23:59:59.000Z

329

Giant vacuum forces via transmission lines  

E-Print Network [OSTI]

Quantum electromagnetic fluctuations induce forces between neutral particles, known as the van der Waals (vdW) and Casimir interactions. These fundamental forces, mediated by virtual photons from the vacuum, play an important role in basic physics and chemistry, and in emerging technologies involving, e.g. micro-electromechanical systems or quantum information processing. Here we show that these interactions can be enhanced by many orders of magnitude upon changing the character of the mediating vacuum-modes. By considering two polarizable particles in the vicinity of any standard electric transmission line, along which photons can propagate in one dimension (1d), we find a much stronger and longer-range interaction than in free-space. This enhancement may have profound implications on many-particle and bulk systems, and impact the quantum technologies mentioned above. The predicted giant vacuum force is estimated to be measurable in a coplanar waveguide line.

Ephraim Shahmoon; Igor Mazets; Gershon Kurizki

2014-07-23T23:59:59.000Z

330

Reliability of lightning resistant overhead distribution lines  

SciTech Connect (OSTI)

An assessment of the 32 year historical reliability of the 13.8 kV electrical distribution system at the Oak Ridge National Laboratory (ORNL) in Tennessee has yielded several conclusions useful In the planning of Industrial power Systems. The system configuration at ORNL has essentially remained unchanged in the last 32 years which allows a meaningful comparison of reliability trends for the plant`s eight overhead distribution lines, two of which were built in the 1960`s with lightning resistant construction techniques. Meticulous records indicating the cause, duration, and location of 135 electric outages in the plant`s distribution system have allowed a reliability assessment to be performed. The assessment clearly shows how differences in voltage construction class, length, age, and maximum elevation above a reference elevation influence the reliability of overhead power distribution lines. Comparisons are also made between the ORNL historical data and predicted failure rates from ANSI and IEEE industry surveys.

Tolbert, L.M.; Cleveland, J.T.; Degenhardt, L.J.

1995-04-01T23:59:59.000Z

331

A photoelastic study of simply supported rectangular beams loaded by a round pin located on the vertical center line  

E-Print Network [OSTI]

topic and was always helpful in all phases of the work. Thanks should also be expressed to Professor J. H. Caddess and Professor S. A. Sirns for the helpful criticisms they had to offer, Jerry Don Morgan offered many helpful suggestions and also... the stress components due to the bending moment and the applied load by varying the span while the load was held constant. 3. To compare the results of the photoelastic study with the studies made by Morgan (I)~ and Cox (2). +Numbers in parentheses refer...

Lindsay, Hugh Warren

2012-06-07T23:59:59.000Z

332

A photoelastic study of simply supported rectangular beams with holes on the vertical center lines and subjected to concentrated loads  

E-Print Network [OSTI]

Page 1 Stress Concentration Factors for Various Points for the Beams of this Study . 33 LIST OF FIGURES Figure Page Dimensions of the Models Model in the Loading Frame Fringe Pattern of Beam 1. Isoclinics for Beam L-1 Isoclinics for Beam S-1 10... Calibration of Model for Beam 1 Sketch of a Beam Showing: (a) Locations of sections under consideration (b) dX, b Y, he, S, S, and the sign convention for r xy Horizontal and Vertical Stresses for Beam 1 13 22 Horizontal and Vertical Stresses for Beam...

Lin, Ping Hua

1965-01-01T23:59:59.000Z

333

Forms and Determinant Lines Simon Scott  

E-Print Network [OSTI]

has discrete spectrum {(n + )2 , (n - )2 : n N}, where u = e2i satisfies u2 (1 + |z|2 ) + 2u(z + z Forms and Determinant Lines Simon Scott 1 Introduction The purpose here is to give a direct (M) Hi-2 (Y ) is integration over the fibres. That is, with = c1(T) ch(Ind (m)) = f em · 1 - e

Bushnell, Colin J.

334

New Diagnostics in the FLASH Dump Line  

E-Print Network [OSTI]

Line Status Aug. 2009 BPM 9DUMP BPM 15DUMP BPM 5DUMP Toroid 9DUMP OTR screen 9DUMP BLM 14DUMP BLM 13 at the dump #12;N. Baboi, MDIN. Baboi, MDI FLASH Seminar, Dec. 1, 2009FLASH Seminar, Dec. 1, 2009 Old BPM 15DUMPOld BPM 15DUMP ·Strange behavior of BPM signals measured impedance from end of cable (in bld. 49): L

335

Transmission line environmental assessment guidance document  

SciTech Connect (OSTI)

Since 1939, U.S. utility companies have been required to obtain a Presidential Permit to construct electric transmission lines that cross a U.S. border and connect with a foreign utility. The purpose of this document is to provide Presidential Permit applicants with two types of guidance: (1) on the type of environmental and project descriptive information needed to assess the potential impacts of the proposed and alternative actions and (2) on compliance with applicable federal and state regulations. The main three chapters present information on the purpose and content of this document (Chapter 1); legislative, regulatory, and consultation requirements for transmission line interconnect projects (Chapter 2); and identification of basic transmission system design parameters and environmental data requirements for analysis of potential impacts of the proposed action (Chapter 3). Chapter 3 also includes information on possible techniques or measures to mitigate impacts. Appendix A presents an overview of NEPA requirements and DOE`s implementing procedures. Appendix B summarizes information on legislation that may be applicable to transmission line projects proposed in Presidential Permit applications.

Jackson, J.; Pentecost, E.; Muzzarelli, J.

1994-01-01T23:59:59.000Z

336

Fermi/LAT broad emission line blazars  

E-Print Network [OSTI]

We study the broad emission line blazars detected in the gamma-ray band by the Large Area Telescope onboard the Fermi satellite and with the optical spectrum studied by Shaw et al. (2012, 2013). The observed broad line strength provides a measure of the ionizing luminosity of the accretion disk, while the gamma-luminosity is a proxy for the bolometric non-thermal beamed jet emission. The resulting sample, composed by 217 blazars, is the best suited to study the connection between accretion and jet properties. We compare the broad emission line properties of these blazars with those of radio-quiet and radio-loud quasars present in the Sloan Digital Sky Survey, to asses differences and similarities of the disc luminosity and the virial black hole mass. For most sources, we could derive the black hole mass by reproducing the IR-optical-UV data with a standard accretion disc spectrum, and we compared the black hole masses derived with the two methods. The distributions of the masses estimated in the two ways agre...

Ghisellini, G

2015-01-01T23:59:59.000Z

337

Turbine nozzle/nozzle support structure  

DOE Patents [OSTI]

An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

Boyd, G.L.; Shaffer, J.E.

1997-01-07T23:59:59.000Z

338

Turbine nozzle/nozzle support structure  

DOE Patents [OSTI]

An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

Boyd, G.L.; Shaffer, J.E.

1995-08-15T23:59:59.000Z

339

Turbine nozzle/nozzle support structure  

DOE Patents [OSTI]

An axial flow turbine`s nozzle/nozzle support structure is described having a cantilevered nozzle outer structure including an outer shroud and airfoil vanes extending radially inwardly therefrom, an inner shroud radially adjacent the inner end of the airfoil vanes and cooperatively disposed relative to the outer shroud to provide an annular fluid flow path, an inner and an outer support ring respectively arranged radially inside the inner shroud and axially adjacent a portion of the outer shroud, and pins extending through such portion and into the outer support ring. The inner support ring or inner shroud has a groove therein bounded by end walls for receiving and being axially abuttable with a locating projection from the adjacent airfoil vane, inner shroud, or inner support ring. The nozzle outer structure may comprise segments each of which has a single protrusion which is axially engageable with the outer support ring or, alternatively, a first and second protrusion which are arcuately and axially separated and which include axial openings therein whereby first and second protrusions on respective, arcuately adjacent nozzle segments have axial openings therein which are alignable with connector openings in the outer support ring and within each of such aligned openings a pin is receivable. The inner shroud may, likewise, comprise segments which, when assembled in operating configuration, have a 360 degree expanse. 6 figs.

Boyd, G.L.; Shaffer, J.E.

1996-09-10T23:59:59.000Z

340

Modal Dynamics of Large Wind Turbines with Different Support Structures  

SciTech Connect (OSTI)

This paper presents modal dynamics of floating-platform-supported and monopile-supported offshore wind turbines.

Bir, G.; Jonkman, J.

2008-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Self-Supporting Budget Budget to Actual Comparison  

E-Print Network [OSTI]

Self-Supporting Budget Budget to Actual Comparison System Administration University of Nevada Supporting Budgets Budget to Actual Comparison Introduction

Hemmers, Oliver

342

The morphology of the emission line region of Compact Steep Spectrum radio sources  

E-Print Network [OSTI]

We present the results of HST narrow band imaging of eleven Compact Steep Spectrum (CSS) radio sources. Five of them (3C 48, 3C 147, 3C303.1, 3C 277.1 and 4C 12.50) were part of a dedicated ``pointed'' program of deep line imaging ([OIII]). For six additional sources (3C 49, 3C 93.1, 3C 138, 3C 268.3, 3C305.1 and 3C343.1) ``snapshot'' images ([OIII] or [OII]) were taken from the HST archive. In all but one of the targets (3C 49) line emission has been detected and only in one case (3C 138) is unresolved. In four out five of the sources with deep observations, the line emission extends well beyond the size of the radio source but along the radio axis. Structures of similar surface brightness would have not been seen in the snapshot images. These emission line structures extend to scales of 10 to 30 kpc and cover a projected angle, when seen from the nucleus, of 30 to 110 degrees, indicating that the nuclear illumination is anisotropic. Photon counting arguments also support this interpretation. In six objects the radio emission extends over more than 1 arcsec. In these cases the line emission has an elongated structure, linking the nucleus to the radio-lobes, possibly tracing the path of the invisible radio jets. Nevertheless the emission line morphologies do not show the bow shocks at the extremities of the radio lobes expected if they are sources whose expansion is frustrated by a dense external medium. Our data favour the alternative model in which CSSs are the young phase of the large size radio sources. When ``pointed'' pure continuum images are available, there appears to be no alignment between radio and continuum emission which contradicts previous suggestions based on broad-band HST imaging.

D. J. Axon; A. Capetti; R. Fanti; R. Morganti; A. Robinson; R. Spencer

2000-06-26T23:59:59.000Z

343

Helium pressures in RHIC vacuum cryostats and relief valve requirements from magnet cooling line failure  

SciTech Connect (OSTI)

A catastrophic failure of the RHIC magnet cooling lines, similar to the LHC superconducting bus failure incident, would pressurize the insulating vacuum in the magnet and transfer line cryostats. Insufficient relief valves on the cryostats could cause a structural failure. A SINDA/FLUINT{reg_sign} model, which simulated the 4.5K/4 atm helium flowing through the magnet cooling system distribution lines, then through a line break into the vacuum cryostat and discharging via the reliefs into the RHIC tunnel, had been developed to calculate the helium pressure inside the cryostat. Arc flash energy deposition and heat load from the ambient temperature cryostat surfaces were included in the simulations. Three typical areas: the sextant arc, the Triplet/DX/D0 magnets, and the injection area, had been analyzed. Existing relief valve sizes were reviewed to make sure that the maximum stresses, caused by the calculated maximum pressures inside the cryostats, did not exceed the allowable stresses, based on the ASME Code B31.3 and ANSYS results. The conclusions are as follows: (1) The S/F simulation results show that the highest internal pressure in the cryostats, due to the magnet line failure, is {approx}37 psig (255115 Pa); (2) Based on the simulation, the temperature on the cryostat chamber, INJ Q8-Q9, could drop to 228 K, which is lower than the material minimum design temperature allowed by the Code; (3) Based on the ASME Code and ANSYS results, the reliefs on all the cryostats inside the RHIC tunnel are adequate to protect the vacuum chambers when the magnet cooling lines fail; and (4) In addition to the pressure loading, the thermal deformations, due to the temperature decrease on the cryostat chambers, could also cause a high stress on the chamber, if not properly supported.

Liaw, C.J.; Than, Y.; Tuozzolo, J.

2011-03-28T23:59:59.000Z

344

Spectroscopy of $^{28}$Na: shell evolution toward the drip line  

E-Print Network [OSTI]

Excited states in $^{28}$Na have been studied using the $\\beta$-decay of implanted $^{28}$Ne ions at GANIL/LISE as well as the in-beam $\\gamma$-ray spectroscopy at the NSCL/S800 facility. New states of positive (J$^{\\pi}$=3,4$^+$) and negative (J$^{\\pi}$=1-5$^-$) parity are proposed. The former arise from the coupling between 0d$\\_{5/2}$ protons and a 0d$\\_{3/2}$ neutron, while the latter are due to couplings with 1p$\\_{3/2}$ or 0f$\\_{7/2}$ neutrons. While the relative energies between the J$^{\\pi}$=1-4$^+$ states are well reproduced with the USDA interaction in the N=17 isotones, a progressive shift in the ground state binding energy (by about 500 keV) is observed between $^{26}$F and $^{30}$Al. This points to a possible change in the proton-neutron 0d$\\_{5/2}$-0d$\\_{3/2}$ effective interaction when moving from stability to the drip line. The presence of J$^{\\pi}$=1-4$^-$ negative parity states around 1.5 MeV as well as of a candidate for a J$^{\\pi}$=5$^-$ state around 2.5 MeV give further support to the col...

Lepailleur, A; Mutschler, A; Sorlin, O; Bader, V; Bancroft, C; Barofsky, D; Bastin, B; Baugher, T; Bazin, D; Bildstein, V; Borcea, C; Borcea, R; Brown, B A; Caceres, L; Gade, A; Gaudefroy, L; Grvy, S; Grinyer, G F; Iwasaki, H; Khan, E; Krll, T; Langer, C; Lemasson, A; Llidoo, O; Lloyd, J; Negoita, F; Santos, F de Oliveira; Perdikakis, G; Recchia, F; Redpath, T; Roger, T; Rotaru, F; Saenz, S; Saint-Laurent, M -G; Smalley, D; Sohler, D; Stanoiu, M; Stroberg, S R; Thomas, J C; Vandebrouck, M; Weisshaar, D; Westerberg, A

2015-01-01T23:59:59.000Z

345

A survey for redshifted molecular and atomic absorption lines I  

E-Print Network [OSTI]

We are currently undertaking a large survey for redshifted atomic and molecular absorption ... only one clear and one tentative detection were obtained: HI absorption at z = 0.097 in PKS 1555-140 and OH absorption at z =0.126 in PKS 2300-189, respectively... In order to determine why no clear molecular absorption was detected in any of the 13 sources searched, we investigate the properties of the five redshifted systems currently known to exhibit OH absorption. In four of these, molecules were first detected via millimetre-wave transitions and the flat radio spectra indicate compact background continuum sources, which may suggest a high degree of coverage of the background source by the molecular clouds in the absorber. Furthermore, for these systems we find a relationship between the molecular line strength and red optical--near infrared (V-K) colours, thus supporting the notion that the reddening of these sources is due to dust, which provides an environment conducive to the formation of molecules. Upon comparison with the V-K colours of our sample, this relationship suggests that, presuming the reddening occurs at the host galaxy redshift at least in some of the targets, many of our observations still fall short of the sensitivityrequired to detect OH absorption, although a confirmation of the ``detection'' of OH in 2300-189 could contravene this.

S. J. Curran; M. T. Whiting; M. T. Murphy; J. K. Webb; S. N. Longmore; Y. M. Pihlstroem; R. Athreya; C. Blake

2006-07-26T23:59:59.000Z

346

Supporting Heuristic Evaluation for the Web  

E-Print Network [OSTI]

Web developers are confronted with evaluating the usability of Web interfaces. Automatic Web usability evaluation tools are available, but they are limited in the types of problems they can handle. Tool support for manual usability evaluation...

Flores Mendoza, Ana

2010-01-14T23:59:59.000Z

347

Webinar: Supporting a Hawaii Hydrogen Economy  

Broader source: Energy.gov [DOE]

The Energy Department will present a live webinar titled "Supporting a Hawaii Hydrogen Economy" on Tuesday, July 29, from 3:00 p.m. to 4:00 p.m. Eastern Daylight Time (EDT). The webinar will...

348

Engineering supported membranes for cell biology  

E-Print Network [OSTI]

membranes in structural biology. J Struct Biol 168:12 50.supported membranes for cell biology Cheng-han Yu Jay T.range problems in cell biology. Because lateral mobility of

Yu, Cheng-han; Groves, Jay T.

2010-01-01T23:59:59.000Z

349

Pipe supports and anchors - LMFBR applications  

SciTech Connect (OSTI)

Pipe design and support design can not be treated as separate disciplines. A coordinated design approach is required if LMFBR pipe system adequacy is to be achieved at a reasonable cost. It is particularly important that system designers understand and consider those factors which influence support train flexibility and thus the pipe system dynamic stress levels. The system approach must not stop with the design phase but should continue thru the erection and acceptance test procedures. The factors that should be considered in the design of LMFBR pipe supports and anchors are described. The various pipe support train elements are described together with guidance on analysis, design and application aspects. Post erection acceptance and verification test procedures are then discussed.

Anderson, M.J.

1983-06-01T23:59:59.000Z

350

Government Export Support in a Global Era.  

E-Print Network [OSTI]

??Doctor of Philosophy(PhD)%%%Globalisation in general and trade liberalisation in particular have impacted on many areas of industrialised governments foreign economic policy. Export support is an (more)

Molnar, Krisztina

2008-01-01T23:59:59.000Z

351

Login to Web Strategies Support Center  

E-Print Network [OSTI]

Login to Web Strategies Support Center 1. Enter your network login in the User- name and Password. The Web Admin team will handle ticket assignments to make sure the right person is working on the issue. B

Chapman, Michael S.

352

Supporting the Strategic Objectives of Participative  

E-Print Network [OSTI]

this paper is based was supported by the European Commission under the VIRTU@LIS project (IST-2000-28121). The authors would also like to thank the respondents who took part in the evaluation study

Water Resources Management

2004-01-01T23:59:59.000Z

353

Phase Selectively Soluble Polystyrene-Supported Organocatalysts  

E-Print Network [OSTI]

biphasic separation that avoids a solvent-intensive precipitation process. Coupling of a 4-dimethylaminopyridine (DMAP) analog, Cinchona alkaloid derivative or phosphine-ligated metal catalyst to the poly(4-alkylstyrene) supports was used to prepare...

Khamatnurova, Tatyana

2014-08-10T23:59:59.000Z

354

Future characteristics of Offshore Support Vessels  

E-Print Network [OSTI]

The objective of this thesis is to examine trends in Offshore Support Vessel (OSV) design and determine the future characteristics of OSVs based on industry insight and supply chain models. Specifically, this thesis focuses ...

Rose, Robin Sebastian Koske

2011-01-01T23:59:59.000Z

355

Low thermal expansion seal ring support  

DOE Patents [OSTI]

Today, the trend is to increase the temperature of operation of gas turbine engines. To cool the components with compressor discharge air, robs air which could otherwise be used for combustion and creates a less efficient gas turbine engine. The present low thermal expansion sealing ring support system reduces the quantity of cooling air required while maintaining life and longevity of the components. Additionally, the low thermal expansion sealing ring reduces the clearance "C","C'" demanded between the interface between the sealing surface and the tip of the plurality of turbine blades. The sealing ring is supported by a plurality of support members in a manner in which the sealing ring and the plurality of support members independently expand and contract relative to each other and to other gas turbine engine components.

Dewis, David W. (San Diego, CA); Glezer, Boris (Del Mar, CA)

2000-01-01T23:59:59.000Z

356

Fading support ends Europe's dreams of  

E-Print Network [OSTI]

- aged by US participation," says Robert Aymar, head of the ITER project, who is basedinGarching,Germany this week, after Germany and Britain indicated that they would not support its construction. Germany

357

Headquarters Training Supports EM Field Sites  

Broader source: Energy.gov [DOE]

GERMANTOWN, Md. EMs Office of Safety, Security and Quality Programs sponsored training for headquarters staff for nine days this month to help them better support the Cold War programs cleanup sites around the complex.

358

Radiation embrittlement of PWR vessel supports  

SciTech Connect (OSTI)

Several studies pertaining to radiation damage of PWR vessel supports were conducted between 1978 and 1987. During this period, apparently there was no reason to believe that low-temperature (<100/degree/C) MTR embrittlement data were not appropriate for evaluating embrittlement of PWR vessel supports. However, late in 1986, data from the High Flux Isotope Reactor (HFIR) vessel surveillance program indicated that the embrittlement rates of the several HFIR vessel materials (A212-B, A350-LF3, A105-II) were substantially greater than anticipated on the basis of MTR data. Further evaluation of the HFIR data suggested that a fluence-rate effect was responsible for the apparent discrepancy, and shortly thereafter it became apparent that this rate effect was applicable to the evaluation of LWR vessel supports. As a result, the Nuclear Regulatory Commission (NRC) requested that the Oak Ridge National Laboratory (ORNL) evaluate the impact of the apparent embrittlement rate effect on the integrity of light-water-reactor (LWR) vessel supports. The purpose of the study was to provide an indication of whether the integrity of reactor vessel supports is likely to be challenged by radiation-induced embrittlement. The scope of the evaluation included correlation of the HFIR data for application to the evaluation of LWR vessel supports; a survey and cursory evaluation of all US LWR vessel support designs, selection of two plants for specific-plant evaluation, and a specific-plant evaluation of both plants to determine critical flaw sizes for their vessel supports. 19 refs., 8 figs., 2 tabs.

Cheverton, R.D.; Robinson, G.C.; Pennell, W.E.; Nanstad, R.K.

1989-01-01T23:59:59.000Z

359

Reusing optical supports using a simple software  

E-Print Network [OSTI]

In this paper we show how it is possible to reuse optical supports (CDs, DVDs, etc.) without using chemical or physical transformation, only employing a software that can easily run on domestic computers. This software can make obsolete optical supports useful again, converting de facto WEEE (Waste electric and electronic equipment) into EEE (Electric and electronic equipment). A massive use of such a software can lead to a significant change in EEE every-day use, reducing its production to sustainable levels.

Quatrini, Davide

2010-01-01T23:59:59.000Z

360

Discovery of Photospheric Calcium Line Strength Variations in the DAZd White Dwarf G29-38  

E-Print Network [OSTI]

Metals in the photospheres of white dwarfs with Teff between 12,000 and 25,000 K should gravitationally settle out of these atmospheres in 1-2 weeks. Temporal variations in the line strengths of these metals could provide a direct measurement of episodic metal accretion. Using archival VLT and Keck spectroscopy, we find evidence that the DAZd white dwarf G29-38 shows significant changes in its Ca II K line strength. At the two best-observed epochs, we find that the Ca line equivalent width (EW) = 165 +- 4 mA (in 1996.885) and 280 +- 8 mA (in 1999.653), which is an increase of 70%. We consider the effect that pulsation has on the Ca EWs for this known variable star, and find that it adds an error of < 1 mA to these measurements. Calcium line strengths at other observational epochs support variations with timescales as short as two weeks. These Ca EW variations indicate that the metal accretion process in G29-38, presumably from its debris disk, is episodic on timescales of a few weeks or less, and thus the accretion is not dominated by Poynting-Robertson drag from an optically thin, continuous disk, which has a timescale of ~1 year.

Ted von Hippel; Susan E. Thompson

2007-02-25T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Radio-Frequency Interference (RFI) From Extra-High-Voltage (EHV) Transmission Lines  

E-Print Network [OSTI]

-current (HVAC) transmission lines; high-voltage direct-current (HVDC) transmission lines will be addressed

Ellingson, Steven W.

362

Intelligence support to arms control. Study project  

SciTech Connect (OSTI)

This paper argues that intelligence support is critical to the success of arms control. It identifies and describes the roles of intelligence in the arms control process, describes the existing intelligence organizational structure for arms control support, and identifies and analyzes issues. The roles include support to policy formulation, support to treaty negotiation, support to ratification, and finally, during verification, support for the implementation of the treaty through monitoring. The Director of Central Intelligence is responsible for monitoring, while the Arms Control and Disarmament Agency has responsibility for verification. Adjudication of conflicting interpretations occurs within the NSC committee structure. For several reasons, intelligence cannot be expected to do the actual verification of an arms control treaty. Most importantly, determination of an acceptable degree of confidence is always a political issue, although based on military judgement. Assigning intelligence responsibility for monitoring, rather than verification, helps to limit the politicization of intelligence. Issues identified during the research for this paper were analyzed within three subgroups: those inherent in the intelligence discipline; these must be managed successfully to limit adverse impact on intelligence products. Second, issues and challenges inherent in arms control bureaucratic relationships; these are best managed by keeping separate the actual monitoring analysis and verification this gives the West justification for caution, and reinforces the need for continued emphasis on verification.

Grisham, A.E.

1990-04-09T23:59:59.000Z

363

Multi-language Struct Support in Babel  

SciTech Connect (OSTI)

Babel is an open-source language interoperability framework tailored to the needs of high-performance scientific computing. As an integral element of the Common Component Architecture (CCA) it is used in a wide range of research projects. In this paper we describe how we extended Babel to support interoperable tuple data types (structs). Structs are a common idiom in scientific APIs; they are an efficient way to pass tuples of nonuniform data between functions, and are supported natively by most programming languages. Using our extended version of Babel, developers of scientific code can now pass structs as arguments between functions implemented in any of the supported languages. In C, C++ and Fortran 2003, structs can be passed without the overhead of data marshaling or copying, providing language interoperability at minimal cost. Other supported languages are Fortran 77, Fortran 90, Java and Python. We will show how we designed a struct implementation that is interoperable with all of the supported languages and present benchmark data compare the performance of all language bindings, highlighting the differences between languages that offer native struct support and an object-oriented interface with getter/setter methods.

Ebner, D; Prantl, A; Epperly, T W

2011-03-22T23:59:59.000Z

364

PUMPING UP THE [N I] NEBULAR LINES  

SciTech Connect (OSTI)

The optical [N I] doublet near 5200 A is anomalously strong in a variety of emission-line objects. We compute a detailed photoionization model and use it to show that pumping by far-ultraviolet (FUV) stellar radiation previously posited as a general explanation applies to the Orion Nebula (M42) and its companion M43; but, it is unlikely to explain planetary nebulae and supernova remnants. Our models establish that the observed nearly constant equivalent width of [N I] with respect to the dust-scattered stellar continuum depends primarily on three factors: the FUV to visual-band flux ratio of the stellar population, the optical properties of the dust, and the line broadening where the pumping occurs. In contrast, the intensity ratio [N I]/H{beta} depends primarily on the FUV to extreme-ultraviolet ratio, which varies strongly with the spectral type of the exciting star. This is consistent with the observed difference of a factor of five between M42 and M43, which are excited by an O7 and B0.5 star, respectively. We derive a non-thermal broadening of order 5 km s{sup -1} for the [N I] pumping zone and show that the broadening mechanism must be different from the large-scale turbulent motions that have been suggested to explain the line widths in this H II region. A mechanism is required that operates at scales of a few astronomical units, which may be driven by thermal instabilities of neutral gas in the range 1000-3000 K. In an Appendix A, we describe how collisional and radiative processes are treated in the detailed model N I atom now included in the CLOUDY plasma code.

Ferland, G. J.; Porter, R. L. [Department of Physics, University of Kentucky, Lexington, KY 40506 (United States); Henney, W. J. [Centro de Radioastronomia y Astrofisica, UNAM Campus Morelia, Apartado Postal 3-72, 58090 Morelia, Michoacan (Mexico); O'Dell, C. R. [Department of Physics and Astronomy, Vanderbilt University, Box 1807-B, Nashville, TN 37235 (United States); Van Hoof, P. A. M. [Royal Observatory of Belgium, Ringlaan 3, 1180 Brussels (Belgium); Williams, R. J. R. [AWE plc, Aldermaston, Reading RG7 4PR (United Kingdom)

2012-09-20T23:59:59.000Z

365

Speed-line for 3D animation  

E-Print Network [OSTI]

Committee Members, Carol LaFayette John Keyser Head of Department, Mardelle Shepley December 2005 Major Subject: Visualization Sciences iii ABSTRACT Speed-Line for 3D Animation. (December 2005) Won Chan Song, B.F.A., Ringling School of Art and Design Chair... to thank my committee members, Prof. Carol LaFayette and Dr. John Keyser for their advice and feedback. My gratitude also goes to Hobart Chan for letting me borrow his car model, which saved me a huge amount of time when I was making an animation as a...

Song, Won Chan

2007-04-25T23:59:59.000Z

366

LINE Commission Visits Idaho National Laboratory  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample Environment: Magnet and6ledp/ The LINE Commission

367

LIQUID & GAS NITROGEN LINE SIZING  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr MayAtmospheric Optical Depth7-1D: VegetationEquipment Surfaces and Interfaces Sample Environment: Magnet and6ledp/ The LINE Commission

368

Plains & Eastern Clean Line HVDC Scheme  

Broader source: Energy.gov (indexed) [DOE]

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May Jun Jul(Summary) "ofEarly Careerlumens_placard-green.epsEnergy1.pdfMarket |21, 2015 7:00AM to 10:30AM EDT Tuition Cost: $0Line

369

On Line Journals - Links - Cyclotron Institute  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE:1 First Use of Energy for All Purposes (Fuel and Nonfuel),Feet) Year Jan Feb Mar Apr May JunDatastreamsmmcrcalgovInstrumentsrucLas Conchas recoveryLaboratorySpeeding access1 TechnicalOil inventories inOmbudsOmni JawOn-Line

370

Air Entrainment by Viscous Contact Lines  

E-Print Network [OSTI]

The entrainment of air by advancing contact lines is studied by plunging a solid plate into a very viscous liquid. Above a threshold velocity, we observe the formation of an extended air film, typically 10 microns thick, which subsequently decays into air bubbles. Exploring a large range of viscous liquids, we find an unexpectedly weak dependence of entrainment speed on liquid viscosity, pointing towards a crucial role of the flow inside the air film. This induces a striking asymmetry between wetting and dewetting: while the breakup of the air film strongly resembles the dewetting of a liquid film, the wetting speeds are larger by orders of magnitude.

Marchand, Antonin; Snoeijer, Jacco H; Andreotti, Bruno

2011-01-01T23:59:59.000Z

371

Efficient buffer design algorithms for production line profit maximization  

E-Print Network [OSTI]

A production line is a manufacturing system where machines are connected in series and separated by buffers. The inclusion of buffers increases the average production rate of the line by limiting the propagation of ...

Shi, Chuan, Ph. D. Massachusetts Institute of Technology

2012-01-01T23:59:59.000Z

372

Nondestructive Testing of Overhead Transmission Lines: Numerical and Experimental Investigation  

E-Print Network [OSTI]

Overhead transmission lines are periodically inspected using both on-ground and helicopter-aided visual inspection. Factors including sun glare, cloud cover, close proximity to power lines and the rapidly changing visual circumstances make airborne...

Kulkarni, Salil Subhash

2011-02-22T23:59:59.000Z

373

CHARACTERIZING LOSSES IN MICROSTRIP TRANSMISSION LINES Rashmi Pathak  

E-Print Network [OSTI]

CHARACTERIZING LOSSES IN MICROSTRIP TRANSMISSION LINES by Rashmi Pathak A dissertation submitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Transmission Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 Engineering) at the UNIVERSITY OF WISCONSIN­MADISON Summer 2005 #12;i Characterizing Losses in Transmission

Timbie, Peter

374

Mode conversation losses in overmolded millimeter wave transmission lines  

E-Print Network [OSTI]

Millimeter wave transmission lines are integral components for many important applications like nuclear fusion and NMR spectroscopy. In low loss corrugated transmission lines propagating the HE,1 mode with a high waveguide ...

Tax, David S. (David Samuel)

2008-01-01T23:59:59.000Z

375

EIS-0421: Big Eddy-Knight Transmission Line  

Broader source: Energy.gov [DOE]

BPA is proposing to build a new 500 kilovolt (kV) transmission line in Wasco County, Oregon and Klickitat County, Washington and a new substation in Klickitat County. The new BPA transmission line...

376

Discontinuities in transmission lines and wave guides  

E-Print Network [OSTI]

transmission 11ne: nd cosx1sl cables have discrete support and separators. These suoports may be either d1electrics or conductors. In general the support" are desicned to introduce no discontinuity at one freouenCy, hut at other frequencies, they do...=- formin~ ths t of s he 1 ix. Co-xl l cable HC-6 r ansmi as 1 on 1 1 re in t hs f orm 5/U with t 1 e 1nner conductor in the form of s helix with ch:racter1st1c 1mpedance of 95C ohms has been manufactured. The aut hor hs c made h1ph- 1mpedance cable...

Mathis, Harold Fletcher

2012-06-07T23:59:59.000Z

377

Evidence for Line Broadening by Electron Scattering in the Broad Line Region of NGC 4395  

E-Print Network [OSTI]

A high quality Keck spectrum of the Halpha line in NGC 4395 reveals symmetric exponential wings, fv\\propto e^{-v/sigma}, with sigma~500km/s. The wings extend out to >2500km/s from the line core, and down to a flux density of <10^-3 of the peak flux density. Numerical and analytic calculations indicate that exponential wings are expected for optically thin, isotropic, thermal electron scattering. Such scattering produces exponential wings with sigma=1.1sigma_e(ln tau_e^-1)^0.45, where sigma_e is the electron velocity dispersion, and tau_e is the electron scattering optical depth. The Halpha wings in NGC 4395 are well fit by an electron scattering model with tau_e=0.34, and an electron temperature T_e=1.1x10^4K. Such conditions are produced in photoionized gas with an ionization parameter U=0.3, as expected in the broad line region (BLR). Similar analysis of the [O III] 5007 line yields tau_e<0.01, consistent with the lower ionization in the narrow line region. If the electron scattering interpretation is correct, there should be a tight correlation between tau_e and the ionizing flux on time scales shorter than the BLR dynamical time, or ~1 week for NGC 4395. In contrast, the value of sigma should remain nearly constant on these time scales. Such wings may be discernible in other objects with unusually narrow Balmer lines, and they can provide a useful direct probe of T_e and tau_e in the BLR.

Ari Laor

2006-01-30T23:59:59.000Z

378

Fuzzy Relative Positioning for On-Line Handwritten Stroke Analysis  

E-Print Network [OSTI]

Fuzzy Relative Positioning for On-Line Handwritten Stroke Analysis Franc¸ois Bouteruche, S and robust mod- elling of the relative positioning of on-line handwritten strokes. We exploit the fuzzy to deal with the particular nature of on-line strokes, which are consti- tuted of non-connected points

Paris-Sud XI, Université de

379

Free Vibrations of Coupled Spans of Overhead Transmission Lines  

E-Print Network [OSTI]

damage to the cables. Figure 1: Overhead transmission lines. Spans are suspended between towers fromFree Vibrations of Coupled Spans of Overhead Transmission Lines Sjoerd W. Rienstra Department transmission lines is studied. It is shown that the natural vibration is the gravity mode, which is free from

Eindhoven, Technische Universiteit

380

Ridgeview Publishing Company Indeterminism and the Thin Red Line  

E-Print Network [OSTI]

Ridgeview Publishing Company Indeterminism and the Thin Red Line Author(s): Nuel Belnap INDETERMINISM AND THE THIN RED LINE NuelBelnapandMitchellGreen Universityof Pittsburgh 1. Introduction 2,settledness,andactualityin branchingtime 5. The AssertionProblem 6. TheThinRedLine 7. Time's wingedchariothurriesnear 1. Introduction

Belnap, Nuel

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Reference: RGL 83-09 Subject: POWER TRANSMISSION LINES  

E-Print Network [OSTI]

Reference: RGL 83-09 Subject: POWER TRANSMISSION LINES Title: MARKING OF AERIAL POWER TRANSMISSION. 1. The marking of aerial power transmission lines, cables, and structures over the navigable waters LINES, CABLES, & STRUCTURES Issued: 07/13/83 Expires: 12/31/85 Originator: DAEN-CWO-N Description: ARMY

US Army Corps of Engineers

382

Using Transmission Lines for Global On-Chip Communication  

E-Print Network [OSTI]

1 Using Transmission Lines for Global On-Chip Communication Aaron Carpenter, Jianyun Hu, Jie Xu-switched network-on-chip a less attractive option. An alternative solution uses well-engineered transmission lines as communication links. These transmission lines, along with simple, practical circuits using modern CMOS technol

Huang, Michael C.

383

Asymmetric parametric amplification in nonlinear left-handed transmission lines  

E-Print Network [OSTI]

Asymmetric parametric amplification in nonlinear left-handed transmission lines David A. Powell amplification in nonlinear left-handed transmission lines, which serve as model systems for nonlinear negative-handed regime. © 2009 American Institute of Physics. DOI: 10.1063/1.3089842 Left-handed transmission lines

384

Nonlinear Free Vibrations of Coupled Spans of Overhead Transmission Lines  

E-Print Network [OSTI]

Nonlinear Free Vibrations of Coupled Spans of Overhead Transmission Lines Sjoerd W. Rienstra transmission lines is studied. It is shown that the natural vibration is the gravity mode, of which of the phenomenon of galloping, which is a high amplitude periodic oscillation of overhead transmission lines due

Rienstra, Sjoerd W.

385

Multifrequency Wilkinson Power Divider Using Microstrip Nonuniform Transmission Lines  

E-Print Network [OSTI]

Multifrequency Wilkinson Power Divider Using Microstrip Nonuniform Transmission Lines Mohammad desired frequencies. The proposed structure contains two Microstrip Nonuniform Transmission Lines (MNTLs­6] and using composite right/left-handed transmission line (CRLH) [7]. The main disadvantage of multistage

Paris-Sud XI, Université de

386

New approach for modelling distributed MEMS transmission lines  

E-Print Network [OSTI]

New approach for modelling distributed MEMS transmission lines K. Topalli, M. Unlu, S. Demir, O for the distributed MEMS transmission line (DMTL) structures. In this new model, the MEMS bridges that are used as the loading elements of the DMTL structures are represented as low-impedance transmission lines, rather than

Akin, Tayfun

387

Characterization of Neptunium Oxide Generated Using the HB-Line Phase II Flowsheet  

SciTech Connect (OSTI)

Approximately 98 grams of neptunium(IV) oxide (NpO{sub 2}) were produced at the Savannah River Technology Center (SRTC) for use in gas generation tests to support the neptunium stabilization program at the Savannah River Site (SRS). The NpO{sub 2} was produced according to the anticipated HB-Line flowsheet consisting of anion exchange, oxalate precipitation, filtration, and calcination. Characterization of the NpO{sub 2} product to be used in gas generation tests included bulk and tap density measurements, X-ray diffraction, particle size distribution, specific surface area measurements, and moisture analysis.

Duffey, J

2003-08-29T23:59:59.000Z

388

Yucca Mountain Climate Technical Support Representative  

SciTech Connect (OSTI)

The primary objective of Project Activity ORD-FY04-012, Yucca Mountain Climate Technical Support Representative, was to provide the Office of Civilian Radioactive Waste Management (OCRWM) with expertise on past, present, and future climate scenarios and to support the technical elements of the Yucca Mountain Project (YMP) climate program. The Climate Technical Support Representative was to explain, defend, and interpret the YMP climate program to the various audiences during Site Recommendation and License Application. This technical support representative was to support DOE management in the preparation and review of documents, and to participate in comment response for the Final Environmental Impact Statement, the Site Recommendation Hearings, the NRC Sufficiency Comments, and other forums as designated by DOE management. Because the activity was terminated 12 months early and experience a 27% reduction in budget, it was not possible to complete all components of the tasks as originally envisioned. Activities not completed include the qualification of climate datasets and the production of a qualified technical report. The following final report is an unqualified summary of the activities that were completed given the reduced time and funding.

Sharpe, Saxon E

2007-10-23T23:59:59.000Z

389

Radiation effects on reactor pressure vessel supports  

SciTech Connect (OSTI)

The purpose of this report is to present the findings from the work done in accordance with the Task Action Plan developed to resolve the Nuclear Regulatory Commission (NRC) Generic Safety Issue No. 15, (GSI-15). GSI-15 was established to evaluate the potential for low-temperature, low-flux-level neutron irradiation to embrittle reactor pressure vessel (RPV) supports to the point of compromising plant safety. An evaluation of surveillance samples from the High Flux Isotope Reactor (HFIR) at the Oak Ridge National Laboratory (ORNL) had suggested that some materials used for RPV supports in pressurized-water reactors could exhibit higher than expected embrittlement rates. However, further tests designed to evaluate the applicability of the HFIR data to reactor RPV supports under operating conditions led to the conclusion that RPV supports could be evaluated using traditional method. It was found that the unique HFIR radiation environment allowed the gamma radiation to contribute significantly to the embrittlement. The shielding provided by the thick steel RPV shell ensures that degradation of RPV supports from gamma irradiation is improbable or minimal. The findings reported herein were used, in part, as the basis for technical resolution of the issue.

Johnson, R.E. [Nuclear Regulatory Commission, Washington, DC (United States). Div. of Engineering Technology; Lipinski, R.E. [Idaho National Engineering Lab., Rockville, MD (United States)

1996-05-01T23:59:59.000Z

390

Vertically aligned gas-insulated transmission line having particle traps at the inner conductor  

DOE Patents [OSTI]

Gas insulated electrical apparatus having first and second conductors separated by an insulating support within an insulating gas environment, and particle traps disposed along the surface of the high potential conductor for trapping and inactivating foreign particles which may be present within the insulating gas medium. Several embodiments of the invention were developed which are particularly suited for vertically aligned gas insulated transmission lines. The particle traps are grooves or cavities formed into the walls of the tubular inner conductor, without extending into the hollow portion of the conductor. In other embodiments, the traps are appendages or insert flanges extending from the inner conductor, with the insulator supports contacting the appendages instead of the inner conductor.

Dale, Steinar J. (Monroeville, PA)

1984-01-01T23:59:59.000Z

391

Electrical Properties of Carbon Fiber Support Systems  

E-Print Network [OSTI]

Carbon fiber support structures have become common elements of detector designs for high energy physics experiments. Carbon fiber has many mechanical advantages but it is also characterized by high conductivity, particularly at high frequency, with associated design issues. This paper discusses the elements required for sound electrical performance of silicon detectors employing carbon fiber support elements. Tests on carbon fiber structures are presented indicating that carbon fiber must be regarded as a conductor for the frequency region of 10 to 100 MHz. The general principles of grounding configurations involving carbon fiber structures will be discussed. To illustrate the design requirements, measurements performed with a silicon detector on a carbon fiber support structure at small radius are presented. A grounding scheme employing copper-kapton mesh circuits is described and shown to provide adequate and robust detector performance.

W. Cooper; C. Daly; M. Demarteau; J. Fast; K. Hanagaki; M. Johnson; W. Kuykendall; H. Lubatti; M. Matulik; A. Nomerotski; B. Quinn; J. Wang

2005-04-19T23:59:59.000Z

392

Supporting Dynamic Ad hoc Collaboration Capabilities  

SciTech Connect (OSTI)

Modern HENP experiments such as CMS and Atlas involve as many as 2000 collaborators around the world. Collaborations this large will be unable to meet often enough to support working closely together. Many of the tools currently available for collaboration focus on heavy-weight applications such as videoconferencing tools. While these are important, there is a more basic need for tools that support connecting physicists to work together on an ad hoc or continuous basis. Tools that support the day-to-day connectivity and underlying needs of a group of collaborators are important for providing light-weight, non-intrusive, and flexible ways to work collaboratively. Some example tools include messaging, file-sharing, and shared plot viewers. An important component of the environment is a scalable underlying communication framework. In this paper we will describe our current progress on building a dynamic and ad hoc collaboration environment and our vision for its evolution into a HENP collaboration environment.

Agarwal, Deborah A.; Berket, Karlo

2003-07-14T23:59:59.000Z

393

Evolution of federal support of science  

SciTech Connect (OSTI)

Evolution of Federal Support of Science'' is Dr. G. T. Seaborg's speech presented at the symposium on the Establishment of Research Support Agencies, held on August 30, 1990, in Washington, DC. He gives a brief history on the development of nuclear energy from the discovery of fission in 1938 to the completion of uranium bombs in 1944. He also covered the scientific activities during the war, which included the establishment of National Defense Research Committee, the Office of Scientific Research and Development, and the Atomic Energy Act. He discussed the debate between the little science'' and the big science,'' which requires hundreds of billions of dollars, such as the superconducting super collider. Dr. Seaborg believes that our country can afford to support both research activities, if we could reduce the expenses of military expansion. 22 figs.

Seaborg, G.T.

1990-08-01T23:59:59.000Z

394

The broadening of Lyman-alpha forest absorption lines  

E-Print Network [OSTI]

We provide an analytical description of the line broadening of HI absorbers in the Lyman-alpha forest resulting from Doppler broadening and Jeans smoothing. We demonstrate that our relation captures the dependence of the line-width on column density for narrow lines in z~3 mock spectra remarkably well. Broad lines at a given column density arise when the underlying density structure is more complex, and such clustering is not captured by our model. Our understanding of the line broadening opens the way to a new method to characterise the thermal state of the intergalactic medium and to determine the sizes of the absorbing structures.

Garzilli, Antonella; Schaye, Joop

2015-01-01T23:59:59.000Z

395

Carrier-mediated transport of valproic acid in BeWo cells, a human trophoblast cell line  

E-Print Network [OSTI]

et al., 1998), asymmetric transferrin transport (Van der Ende et al., 1990; Cerneus et al., 1993), asymmetric fatty acid transport (Liu et al., 1997), choline uptake (Eaton and Sooranna, 1998a), glucose modulation of arginine transport (Eaton... Costar Corporation for support of the Cellular and Molecular Biopharmaceutics Handling Laboratory. Utoguchi, N. and Audus, K.L. (2000) Carrier-mediated transport of valproic acid in BeWo cells, a human trophoblast cell line. Int. J. Pharm. 195, 115...

Utoguchi, Naoki; Audus, Kenneth L.

2000-01-01T23:59:59.000Z

396

Present Status And First Results of the Final Focus Beam Line at the KEK Accelerator Test Facility  

SciTech Connect (OSTI)

ATF2 is a final-focus test beam line which aims to focus the low emittance beam from the ATF damping ring to a vertical size of about 37 nm and to demonstrate nanometer level beam stability. Several advanced beam diagnostics and feedback tools are used. In December 2008, construction and installation were completed and beam commissioning started, supported by an international team of Asian, European, and U.S. scientists. The present status and first results are described.

Bambade, P.; /Orsay /KEK, Tsukuba; Alabau Pons, M.; /Valencia U., IFIC; Amann, J.; /SLAC; Angal-Kalinin, D.; /Daresbury; Apsimon, R.; /Oxford U., JAI; Araki, S.; Aryshev, A.; /KEK, Tsukuba; Bai, S.; /Beijing, Inst. High Energy Phys.; Bellomo, P.; /SLAC; Bett, D.; /Oxford U., JAI; Blair, G.; /Royal Holloway, U. of London; Bolzon, B.; /Savoie U.; Boogert, S.; Boorman, G.; /Royal Holloway, U. of London; Burrows, P.N.; Christian, G.; Coe, P.; Constance, B.; /Oxford U., JAI; Delahaye, Jean-Pierre; /CERN; Deacon, L.; /Royal Holloway, U. of London; Elsen, E.; /DESY /Valencia U., IFIC /KEK, Tsukuba /Beijing, Inst. High Energy Phys. /Savoie U. /Fermilab /Ecole Polytechnique /KEK, Tsukuba /Kyungpook Natl. U. /KEK, Tsukuba /Pohang Accelerator Lab. /Kyoto U., Inst. Chem. Res. /Savoie U. /Daresbury /Tokyo U. /Royal Holloway, U. of London /Kyungpook Natl. U. /Pohang Accelerator Lab. /Tokyo U. /KEK, Tsukuba /SLAC /University Coll. London /KEK, Tsukuba /SLAC /Royal Holloway, U. of London /KEK, Tsukuba /Tokyo U. /SLAC /Tohoku U. /KEK, Tsukuba /Tokyo U. /Pohang Accelerator Lab. /Brookhaven /SLAC /Oxford U., JAI /SLAC /Orsay /KEK, Tsukuba /Oxford U., JAI /Orsay /Fermilab /Tohoku U. /Manchester U. /CERN /SLAC /Tokyo U. /KEK, Tsukuba /Oxford U., JAI /Hiroshima U. /KEK, Tsukuba /CERN /KEK, Tsukuba /Oxford U., JAI /Ecole Polytechnique /SLAC /Oxford U., JAI /Fermilab /SLAC /Liverpool U. /SLAC /Tokyo U. /SLAC /Tokyo U. /KEK, Tsukuba /SLAC /CERN

2011-11-11T23:59:59.000Z

397

Particle trap to sheath non-binding contact for a gas-insulated transmission line having a corrugated outer conductor  

DOE Patents [OSTI]

A non-binding particle trap to outer sheath contact for use in gas insulated transmission lines having a corrugated outer conductor. The non-binding feature of the contact according to the teachings of the invention is accomplished by having a lever arm rotatably attached to a particle trap by a pivot support axis disposed parallel to the direction of travel of the inner conductor/insulator/particle trap assembly.

Fischer, William H. (Pittsburgh, PA)

1984-04-24T23:59:59.000Z

398

SUPPORTED DENSE CERAMIC MEMBRANES FOR OXYGEN SEPARATION  

SciTech Connect (OSTI)

Mixed-conducting membranes have the ability to conduct oxygen with perfect selectivity at elevated temperatures, which makes them an extremely attractive alternative for oxygen separation and membrane reactor applications. The ability to reliably fabricate these membranes in thin or thick films would enable solid-state divisional limitations to be minimized, thus providing higher oxygen flux. Based on that motivation, the overall objective for this project is to develop and demonstrate a strategy for the fabrication of supported Wick film ceramic mixed conducting membranes, and improve the understanding of the fundamental issues associated with reliable fabrication of these membranes. The project has focused on the mixed-conducting ceramic composition SrCo{sub 0.5}FeO{sub x} because of its superior permeability and stability in reducing atmospheres. The fabrication strategy employed involves the deposition of SrCo{sub 0.5}FeO{sub x} thick films onto porous supports of the same composition. In the second year of this project, we completed characterization of the sintering and phase behavior of the porous SrCo{sub 0.5}FeO{sub x} supports, leading to a standard support fabrication methodology. Using a doctor blade method, pastes made from aerosol-derived SrCo{sub 0.5}FeO{sub x} powder dispersed with polyethylene glycol were applied to the supports, and the sintering behavior of the thick film membranes was examined in air and nitrogen atmospheres. It has been demonstrated that the desired crystalline phase content can be produced in the membranes, and that the material in the membrane layer can be highly densified without densifying the underlying support. However, considerable cracking and opening of the film occurred when films densified to a high extent. The addition of MgO into the SrCo{sub 0.5}FeO{sub x} supports was shown to inhibit support sintering so that temperatures up to 1300 C, where significant liquid formation occurs, could be used for film sintering. This successfully reduced cracking, however the films retained open porosity. The investigation of this concept will be continued in the final year of the project. Investigation of a metal organic chemical vapor deposition (MOCVD) method for defect mending in dense membranes was also initiated. An appropriate metal organic precursor (iron tetramethylheptanedionate) was identified whose deposition can be controlled by access to oxygen at temperatures in the 280-300 C range. Initial experiments have deposited iron oxide, but only on the membrane surface; thus refinement of this method will continue.

Timothy L. Ward

2000-06-30T23:59:59.000Z

399

Rotating electric machine with fluid supported parts  

DOE Patents [OSTI]

A rotating electric machine in which the armature winding thereof and other parts are supported by a liquid to withstand the mechanical stresses applied during transient overloads and the like. In particular, a narrow gap is provided between the armature winding and the stator which supports it and this gap is filled with an externally pressurized viscous liquid. The liquid is externally pressurized sufficiently to balance the static loads on the armature winding. Transient mechanical loads which deform the armature winding alter the gap dimensions and thereby additionally pressurize the viscous liquid to oppose the armature winding deformation and more nearly uniformly to distribute the resulting mechanical stresses.

Smith, Jr., Joseph L. (Concord, MA); Kirtley, Jr., James L. (Brookline, MA)

1981-01-01T23:59:59.000Z

400

The Infrared Ca II lines in Sunspot Umbrae  

E-Print Network [OSTI]

We present an empirical working model for sunspot umbrae which equally describes observed continuum intensities and line profiles. The wings of the infrared Ca II lines depend sensitively on the temperature gradient at -0.6 umbra and are thus insensitive to parasitic light. It is also shown that the infrared K I 7699 line is suitable for umbral spectroscopy since it is not seriously blended, its continuum is well defined and it is less influenced by parasitic light as compared to lines in the visible spectrum, due to the smaller umbal contrast. Calculations show that the umbral gradient dT/d(tau), required to fit the Ca II triplet lines, strongly conflicts with the observed profiles of K I 7699, NaD2 and Fe I 5434 (g=0), even when assuming vanishing Fe II lines for a maximum correction of parasitic light. It is shown that the discrepancy from the different line pr...

Kollatschny, W; Wiehr, E; Fallipou, M A

2012-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

XMM-Newton Observations of AGN Iron Line Profiles  

E-Print Network [OSTI]

XMM-Newton observations of type I AGN are presented. The properties of the iron K emission line are reviewed, the majority of AGN observed by XMM-Newton show narrow, unresolved (by XMM) iron lines at 6.4 keV from cold matter that must originate far from the inner accretion disc, perhaps in the putative torus or outer broad line region. The strength of this narrow line appears to decrease with luminosity, implying a reduction in the covering fraction of this material in the more luminous quasars. Few examples of the broad, relativistic iron line profile have been found by XMM-Newton, although in MCG -6-30-15, the extreme breadth of the broad line component may imply a Kerr metric for the central black hole. Generally, relativistic Fe K line profiles are not required in a number of other Seyfert 1 X-ray spectra.

James Reeves

2002-11-18T23:59:59.000Z

402

Atomic line emission analyzer for hydrogen isotopes  

DOE Patents [OSTI]

Apparatus for isotopic analysis of hydrogen comprises a low pressure chamber into which a sample of hydrogen is introduced and then exposed to an electrical discharge to excite the electrons of the hydrogen atoms to higher energy states and thereby cause the emission of light on the return to lower energy states, a Fresnel prism made at least in part of a material anomalously dispersive to the wavelengths of interest for dispersing the emitted light, and a photodiode array for receiving the dispersed light. The light emitted by the sample is filtered to pass only the desired wavelengths, such as one of the lines of the Balmer series for hydrogen, the wavelengths of which differ slightly from one isotope to another. The output of the photodiode array is processed to determine the relative amounts of each isotope present in the sample. Additionally, the sample itself may be recovered using a metal hydride.

Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

1993-01-01T23:59:59.000Z

403

Atomic line emission analyzer for hydrogen isotopes  

DOE Patents [OSTI]

Apparatus for isotopic analysis of hydrogen comprises a low pressure chamber into which a sample of hydrogen is introduced and then exposed to an electrical discharge to excite the electrons of the hydrogen atoms to higher energy states and thereby cause the emission of light on the return to lower energy states, a Fresnel prism made at least in part of a material anomalously dispersive to the wavelengths of interest for dispersing the emitted light, and a photodiode array for receiving the dispersed light. The light emitted by the sample is filtered to pass only the desired wavelengths, such as one of the lines of the Balmer series for hydrogen, the wavelengths of which differ slightly from one isotope to another. The output of the photodiode array is processed to determine the relative amounts of each isotope present in the sample. Additionally, the sample itself may be recovered using, a metal hydride.

Kronberg, J.W.

1991-05-08T23:59:59.000Z

404

Dispersion-free radial transmission lines  

DOE Patents [OSTI]

A dispersion-free radial transmission line ("DFRTL") preferably for linear accelerators, having two plane conductors each with a central hole, and an electromagnetically permeable material ("EPM") between the two conductors and surrounding a channel connecting the two holes. At least one of the material parameters of relative magnetic permeability, relative dielectric permittivity, and axial width of the EPM is varied as a function of radius, so that the characteristic impedance of the DFRTL is held substantially constant, and pulse transmission therethrough is substantially dispersion-free. Preferably, the EPM is divided into concentric radial sections, with the varied material parameters held constant in each respective section but stepwise varied between sections as a step function of the radius. The radial widths of the concentric sections are selected so that pulse traversal time across each section is the same, and the varied material parameters of the concentric sections are selected to minimize traversal error.

Caporaso, George J. (Livermore, CA); Nelson, Scott D. (Patterson, CA)

2011-04-12T23:59:59.000Z

405

Calibrating transport lines using LOCO techniques  

SciTech Connect (OSTI)

With the 12GeV upgrade underway at CEBAF, there is a need to re-characterize the beamlines after the modifications made to it to accommodate running at higher energies. We present a linear perturbation approach to calibrating the optics model of transport lines. This method is adapted from the LOCO method in use for storage rings. We consider the effect of quadrupole errors, dipole construction errors as well as beam position monitors and correctors calibrations. The ideal model is expanded to first order in Taylor series of the quadrupole errors. A set of difference orbits obtained by exciting the correctors along the beamline is taken, yielding the measured response matrix. An iterative procedure is invoked and the quadrupole errors as well as beam position monitors and corrector calibration factors are obtained. Here we present details of the method and results of first measurements at CEBAF in early 2011.

Yves Roblin

2011-09-01T23:59:59.000Z

406

On-line tritium production monitor  

DOE Patents [OSTI]

A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched {sup 6}Li and connected to standard scintillation counter circuitry. A neutron generated {sup 6}Li(n)T reaction occurs in the coated surface of {sup 6}Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers. 5 figures.

Mihalczo, J.T.

1993-11-23T23:59:59.000Z

407

On-line tritium production monitor  

DOE Patents [OSTI]

A scintillation optical fiber system for the on-line monitoring of nuclear reactions in an event-by-event manner is described. In the measurement of tritium production one or more optical fibers are coated with enriched .sup.6 Li and connected to standard scintillation counter circuitry. A neutron generated .sup.6 Li(n )T reaction occurs in the coated surface of .sup.6 Li-coated fiber to produce energetic alpha and triton particles one of which enters the optical fiber and scintillates light through the fiber to the counting circuit. The coated optical fibers can be provided with position sensitivity by placing a mirror at the free end of the fibers or by using pulse counting circuits at both ends of the fibers.

Mihalczo, John T. (Oak Ridge, TN)

1993-01-01T23:59:59.000Z

408

Atomic line emission analyzer for hydrogen isotopes  

DOE Patents [OSTI]

Apparatus for isotopic analysis of hydrogen comprises a low pressure chamber into which a sample of hydrogen is introduced and then exposed to an electrical discharge to excite the electrons of the hydrogen atoms to higher energy states and thereby cause the emission of light on the return to lower energy states, a Fresnel prism made at least in part of a material anomalously dispersive to the wavelengths of interest for dispersing the emitted light, and a photodiode array for receiving the dispersed light. The light emitted by the sample is filtered to pass only the desired wavelengths, such as one of the lines of the Balmer series for hydrogen, the wavelengths of which differ slightly from one isotope to another. The output of the photodiode array is processed to determine the relative amounts of each isotope present in the sample. Additionally, the sample itself may be recovered using a metal hydride.

Kronberg, J.W.

1993-03-30T23:59:59.000Z

409

Second Line of Defense Spares Program Assessment  

SciTech Connect (OSTI)

The Office of the Second Line of Defense (SLD) is part of the Department of Energys (DOE) National Nuclear Security Administration (NNSA). The SLD Program accomplishes its critical global security mission by forming cooperative relationships with partner countries to install passive radiation detection systems that augment traditional inspection and law enforcement measures by alerting border officials to the presence of special nuclear or other radiological materials in cross-border traffic. An important tenet of the program is to work collaboratively with these countries to establish the necessary processes, procedures, infrastructure and conditions that will enable them to fully assume the financial and technical responsibilities for operating the equipment. As the number of operational deployments grows, the SLD Program faces an increasingly complex logistics process to promote the timely and efficient supply of spare parts.

Henderson, Dale L.; Muller, George; Mercier, Theresa M.; Brigantic, Robert T.; Perkins, Casey J.; Cooley, Scott K.

2012-11-20T23:59:59.000Z

410

On-line chemical composition analyzer development  

SciTech Connect (OSTI)

The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office of Industrial Technologies, whose mission is to conduct cost-shared R D for new high-risk, high-payoff industrial energy conservation technologies. Although this document contains references to individual manufacturers and their products, the opinions expressed on the products reported do not necessarily reflect the position of the Department of Energy.

Roberts, M.J.; Garrison, A.A.; Muly, E.C.; Moore, C.F.

1992-02-01T23:59:59.000Z

411

IEMDC IN-LINE ELECTRIC MOTOR DRIVEN COMPRESSOR  

SciTech Connect (OSTI)

This report contains the final project summary and deliverables required by the award for the development of an In-line Electric Motor Driven Compressor (IEMDC). Extensive work was undertaken during the course of the project to develop the motor and the compressor section of the IEMDC unit. Multiple design iterations were performed to design an electric motor for operation in a natural gas environment and to successfully integrate the motor with a compressor. During the project execution, many challenges were successfully overcome in order to achieve the project goals and to maintain the system design integrity. Some of the challenges included limiting the magnitude of the compressor aerodynamic loading for appropriate sizing of the magnetic bearings, achieving a compact motor rotor size to meet the rotor dynamic requirements of API standards, devising a motor cooling scheme using high pressure natural gas, minimizing the impact of cooling on system efficiency, and balancing the system thrust loads for the magnetic thrust bearing. Design methods that were used on the project included validated state-of-the-art techniques such as finite element analysis and computational fluid dynamics along with the combined expertise of both Curtiss-Wright Electro-Mechanical Corporation and Dresser-Rand Company. One of the most significant areas of work undertaken on the project was the development of the unit configuration for the system. Determining the configuration of the unit was a significant step in achieving integration of the electric motor into a totally enclosed compression system. Product review of the IEMDC unit configuration was performed during the course of the development process; this led to an alternate design configuration. The alternate configuration is a modular design with the electric motor and compressor section each being primarily contained in its own pressure containing case. This new concept resolved the previous conflict between the aerodynamic flow passage requirements and electric motor requirements for support and utilities by bounding the flowpath within the compressor section. However most importantly, the benefits delivered by the new design remained the same as those proposed by the goals of the project. In addition, this alternate configuration resulted in the achievement of a few additional advantages over the original concept such as easier maintenance, operation, and installation. Interaction and feedback solicited from target clients regarding the unit configuration supports the fact that the design addresses industry issues regarding accessibility, maintainability, preferred operating practice, and increased reliability.

Michael J. Crowley; Prem N. Bansal

2004-10-01T23:59:59.000Z

412

Decision Support Facility for the APS Control System  

E-Print Network [OSTI]

The Advanced Photon Source is now in its fifth year of routine beam production. The EPICS-based [1] control system has entered the phase in its life cycle where new control algorithms must be implemented under increasingly stringent operational and reliability requirements. The sheer volume of the control system (~270,000 records, ~145 VME-based input-output controllers (IOCs), and ~7,000,000 lines of EPICS ASCII configuration code), presents a daunting challenge for code maintenance. The present work describes a relational database that provides an integrated view of the interacting components of the entire APS control system, including the IOC low-level logic, the physical wiring documentation, and high-level client applications. The database is extracted (booted) from the same operational CVS repository as that used to load the active IOCs. It provides site-wide decision support facilities to inspect and trace control flow and to identify client (e.g., user interface) programs involved at any selected poin...

Dohan, D A

2001-01-01T23:59:59.000Z

413

Economic Assessment ofEconomic Assessment of BiofuelBiofuel Support PoliciesSupport Policies  

E-Print Network [OSTI]

Changecomparedtobaseline #12;Impact ofImpact of biofuelbiofuel support removal on biodiesel production,support removal on biodiesel production, 20132013--2017 average2017 average -40% -20% 0% 20% Changecomparedtobaseline;Policy IssuesPolicy Issues · How far does biofuel production and consumption in OECD countries depend

414

Extending Programming Environments to Support Architectural Design  

E-Print Network [OSTI]

integrated tool sets that support the production of source code in a programming language. They usually comprise tools for editing often syntax directed, compiling, executing, debugging, and source code browsing 28 from Xerox Parc, Integral C 25 from Tektronics, and the Turbo environments from Borland

Mancoridis, Spiros

415

Support for Students in Engineering, Computing  

E-Print Network [OSTI]

students and staff · Includes physical disability, and specific learning difficulties, such as dyslexia://admin.exeter.ac.uk/academic/disability/ · support for wide range of disabilities including dyslexia and mental health difficulties · professional, dyslexia, dyspraxia... · consult Disability Resouce Centre (DRC): assess what is needed, advice on funding

Li, Yi

416

WELCOME TO CANADA. Support at Schulich.  

E-Print Network [OSTI]

#12;WELCOME TO CANADA. Support at Schulich. Congratulations on being accepted to the Schulich School of Business at York University in Toronto, Canada! Our team in the International Relations Office looks forward to welcoming you to Schulich, Toronto, and Canada. We have put together this Arrival Guide

417

Molecular Dynamics Simulations of Supported Pt Nanoclusters  

E-Print Network [OSTI]

¤Introduction and Background ¤Constructing a Physical Model ¤Details of the Simulation ¤Results and Conclusions · Petroleum reformation · Gasification of biomass for biofuels #12;Previous Investigation of NanoclustersMolecular Dynamics Simulations of Supported Pt Nanoclusters Jeffrey Moore #12;A Brief Outline

Washington at Seattle, University of - Department of Physics, Electroweak Interaction Research Group

418

Supporting Database Provenance under Schema Evolution  

E-Print Network [OSTI]

,11] have significantly simplified the problems of preserving the history of the database schemaSupporting Database Provenance under Schema Evolution Shi Gao and Carlo Zaniolo University of California, Los Angeles {gaoshi, zaniolo}@cs.ucla.edu Abstract. Database schema upgrades are common in modern

Zaniolo, Carlo

419

NREL Research Support Facility (RSF) Documentary  

ScienceCinema (OSTI)

he ideas and innovations that define NREL are now shaping the next generation of commercial office buildings. DOE's Research Support Facility at NREL, will set a new benchmark for affordable, sustainable commercial design and construction. The unique form of the RSF is driven by energy-saving strategies, many researched and advanced at NREL.

None

2013-05-29T23:59:59.000Z

420

Client Support: Responsible for the IT service desk, help center, technical support, divisional support and many other user support issues for CCNY community.  

E-Print Network [OSTI]

@ccny.cuny.edu Howard Schneiderman, Sophie Davis- Network Administrator 6958 646-261-4675 howie@ccny.cuny.edu IT Service, Service Desk Manager 5828 646-631-0356 ivette@ccny.cuny.edu Patrick Flores, Administration-Tech Support Specialist 5064 917-692-9486 pflores@ccny.cuny.edu Robert Hernandez, CWE- Computer Systems Administrator 212

Brinkmann, Peter

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Can Clone Detection Support Test Comprehension?  

E-Print Network [OSTI]

Can Clone Detection Support Test Comprehension? Benedikt Hauptmann, Maximilian Junker, Sebastian¨unchen, Germany Rudolf Vaas Munich Re Group M¨unchen, Germany Abstract--Tests are central artifacts of software systems. Therefore, understanding tests is essential for activities such as maintenance, test automation

422

An Integrated Architecture for Supporting Vocational Training  

E-Print Network [OSTI]

Chapter XI An Integrated Architecture for Supporting Vocational Training C. Bouras University of IGI Global is prohibited. AbstrAct E-learning and Web-based training have evolved over time from a newborn trend for complementing the learning process to a major form of education and training

Bouras, Christos

423

SUPPORTING COLLABORATIVE WRITING OF XML DOCUMENTS  

E-Print Network [OSTI]

SUPPORTING COLLABORATIVE WRITING OF XML DOCUMENTS Gerald Oster, Hala Skaf-Molli, Pascal Molli: Data management is a key issue in cooperative systems. Anyone who uses more than one computer or collab- orates with other people is aware of the problems posed by having multiple copies of shared documents

Boyer, Edmond

424

Management of Support Services Contract Activity  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To provide the policy, procedures, and responsibilities for the management of support services contracts within the Department of Energy (DOE). Cancels DOE O 4200.3C dated 5-17-91. Canceled by DOE N 1321.140 dated 5-20-94.

1992-08-31T23:59:59.000Z

425

Supporting Online Material Materials and Methods  

E-Print Network [OSTI]

1 Supporting Online Material Materials and Methods (15) For all possible earthquake pairs. The parameters chosen for window length, filter bandpass, negative sidelobe identification, and cross-correlation threshold are appropriate for high-frequency earthquakes. In order to remove false positives or poor data

Wolfe, Cecily J.

426

SUPPORTING ONLINE MATERIAL Materials and Methods  

E-Print Network [OSTI]

SUPPORTING ONLINE MATERIAL Materials and Methods Two adult male rhesus monkeys (Macaca mulatta with a head-holding device (S1), scleral search coil for monitoring eye position (S2) and a recording chamber monkeys remain actively engaged in experiments, so precise histological identification of recording sites

Newsome, William

427

Hydrogen purifier module with membrane support  

DOE Patents [OSTI]

A hydrogen purifier utilizing a hydrogen-permeable membrane to purify hydrogen from mixed gases containing hydrogen is disclosed. Improved mechanical support for the permeable membrane is described, enabling forward or reverse differential pressurization of the membrane, which further stabilizes the membrane from wrinkling upon hydrogen uptake.

A hydrogen purifier utilizing a hydrogen-permeable membrane to purify hydrogen from mixed gases containing hydrogen is disclosed. Improved mechanical support for the permeable membrane is described, enabling forward or reverse differential pressurization of the membrane, which further stabilizes the membrane from wrinkling upon hydrogen uptake.

2012-07-24T23:59:59.000Z

428

Collaboration Between Support Staff and Software Testers  

E-Print Network [OSTI]

opportunities for reducing the controllable quality-related costs. The Cost of Quality is the total amount quality, and expenses arising from inadequate quality. Quality engineer's goal: minimize total cost on bugs and workarounds. · You can provide lots of other support for each other. #12;Quality Cost

429

ADDENDUM #1A ABOUT LSI SUPPORT SERVICES  

E-Print Network [OSTI]

. In an ongoing effort to support LS-DOS 6.3.x LSI will from time to time issue a revision statement. You may, in most cases, make the revisions yourself or you may send your MASTER disk in for updating. LSI has categorized revisions to fall into two categories. These consist of CRITICAL REVISIONS and NON

Mann, Tim

430

Management of Support Services Contract Activity  

Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

To provide the policy, procedures, and responsibilities for the management of support service contracts within the Department of Energy (DOE). Cancels 4200.3A dated 4-5-83. Change 1 Errata Sheet dated 6-27-89. Canceled by DOE O 4200.3C dated 5-17-91.

1985-10-03T23:59:59.000Z

431

Advanced Cathode Catalysts and Supports for  

E-Print Network [OSTI]

1 Advanced Cathode Catalysts and Supports for PEM Fuel Cells Mark K. Debe 3M Company May 10, 2011 restricted information 2011 Annual Merit Review DOE Hydrogen and Fuel Cells and Vehicle Technologies Programs.125 Performance @ Rated (W/cm2 ) @ 0.8V 1 0.25 1 0.25 Additional Interactions GM Fuel Cell Activities, Nuvera Fuel

432

Policy support activities Brazil Rural Energy  

E-Print Network [OSTI]

1 Policy support activities Brazil Rural Energy Enterprise Development (B-REED) Juan Zak UNEP Risoe makers implement Electricity Law 10.438 in ways that enable small rural energy enterprises to coexist with distribution utilities. ·The Law, approved in April 2002, dealt with key issues for rural energy enterprises

433

Exploratory Search Interfaces to Support Image Discovery  

E-Print Network [OSTI]

Director (1983-2000), Human-Computer Interaction Lab Professor, Department of Computer Science MemberExploratory Search Interfaces to Support Image Discovery Ben Shneiderman ben@cs.umd.edu Founding;Interdisciplinary research community - Computer Science & Psychology - Information Studies & Education (www

Shneiderman, Ben

434

Decision Support for Choice of Security  

E-Print Network [OSTI]

Decision Support for Choice of Security Solution The Aspect-Oriented Risk Driven Development (AORDD decisions. (4) RDD annotation rules for security risk and security solution variable estimation. (5) The AORDD security solution trade-o analysis and trade-o tool BBN topology. (6) Rule set for how

Langseth, Helge

435

Name, title of the presentation Decision Support  

E-Print Network [OSTI]

-off Analysis Trade-off tool BBN topology Aggregate information as input to the trade-off tool Trust aggregation schema #12;9 Security Solution Trade-Off Analysis Risk-driven analysis Trade-off analysis best1 Name, title of the presentation Decision Support for Choice of Security Solution: The AORDD

436

Solar Radiation and Meteorological Data Support  

E-Print Network [OSTI]

Solar Radiation and Meteorological Data Support for the Long Island Solar Farm and NSERCand NSERC-9 2011March 8 9, 2011 #12;LISF Solar Radiation and Meteorological Sensor Network ·· Technology Needs on intermittent source of solar radiationintermittent source of solar radiation #12;LISF Solar Radiation

Homes, Christopher C.

437

Supporting Information Liquid Crystalline Peptide Nanowires**  

E-Print Network [OSTI]

1 Supporting Information Liquid Crystalline Peptide Nanowires** Tae Hee Han, Jangbae Kim, Ji Sun Park, Chan Beum Park, Hyotcherl Ihee,* and Sang Ouk Kim* #12;2 Figure S1. Size distribution of as orientation effect was also considered by using the March-Dollase function. The global isotropic temperature

Ihee, Hyotcherl

438

Quality Support G. Q. Kirk, Lead (4)  

E-Print Network [OSTI]

) Quality Systems and Services Division February 11, 2011 Operations Analysis E. L. Griffis L. R. Brown, Secy. Systems Engineering Y. S. Kwon, Manager HFIR Maintenance D. H. AbercQuality Support G. Q. Kirk, Lead (4) R. L. Bullock (4) A. C. Hendricks (4) G. H. Henkel (4) D. L

439

International Nuclear Safeguards Inspection Support Tool  

SciTech Connect (OSTI)

The US Department of Energy (DOE) is committed to developing technologies to meet escalating requirements for the International Atomic Energy Agency (IAEA) Non-Proliferation Treaty (NPT) monitoring and associated inspections. This commitment involves the customization and transfer of existing remote monitoring/information management technologies for use by the IAEA. This paper describes an information management system called INSIST International Nuclear Safeguards Inspection Support Tool, which was developed by the Pacific Northwest Laboratory (PNL) to support the IAEA Action Team in its role of monitoring and verifying compliance under United Nations Special Commission (UNSC) Resolutions 687, 707, and 715. Initial emphasis was placed on developing and deploying functionality and databases customized to support the Action Team. Throughout the design and customization of INSIST, emphasis was placed on information storage and retrieval capabilities for data gathered by the Action Team. In addition, PNL provided the Action Team with maps and satellite images and other relevant Iraqi databases to further facilitate the following activities: monitoring nuclear activities, facility operations, and nuclear material inventories assisting in inspection planning and training providing post inspection analysis providing onsite inspection support reporting on inspection findings.

Steinmaus, K.L.; Wukelic, G.E.; Beal, O.M.

1994-03-01T23:59:59.000Z

440

Spectroscopy of $^{28}$Na: shell evolution toward the drip line  

E-Print Network [OSTI]

Excited states in $^{28}$Na have been studied using the $\\beta$-decay of implanted $^{28}$Ne ions at GANIL/LISE as well as the in-beam $\\gamma$-ray spectroscopy at the NSCL/S800 facility. New states of positive (J$^{\\pi}$=3,4$^+$) and negative (J$^{\\pi}$=1-5$^-$) parity are proposed. The former arise from the coupling between 0d$\\_{5/2}$ protons and a 0d$\\_{3/2}$ neutron, while the latter are due to couplings with 1p$\\_{3/2}$ or 0f$\\_{7/2}$ neutrons. While the relative energies between the J$^{\\pi}$=1-4$^+$ states are well reproduced with the USDA interaction in the N=17 isotones, a progressive shift in the ground state binding energy (by about 500 keV) is observed between $^{26}$F and $^{30}$Al. This points to a possible change in the proton-neutron 0d$\\_{5/2}$-0d$\\_{3/2}$ effective interaction when moving from stability to the drip line. The presence of J$^{\\pi}$=1-4$^-$ negative parity states around 1.5 MeV as well as of a candidate for a J$^{\\pi}$=5$^-$ state around 2.5 MeV give further support to the collapse of the N=20 gap and to the inversion between the 0f$\\_{7/2}$ and 1p$\\_{3/2}$ levels below Z=12. These features are discussed in the framework of Shell Model and EDF calculations, leading to predicted negative parity states in the low energy spectra of the $^{26}$F and $^{25}$O nuclei.

A. Lepailleur; K. Wimmer; A. Mutschler; O. Sorlin; V. Bader; C. Bancroft; D. Barofsky; B. Bastin; T. Baugher; D. Bazin; V. Bildstein; C. Borcea; R. Borcea; B. A. Brown; L. Caceres; A. Gade; L. Gaudefroy; S. Grvy; G. F. Grinyer; H. Iwasaki; E. Khan; T. Krll; C. Langer; A. Lemasson; O. Llidoo; J. Lloyd; F. Negoita; F. de Oliveira Santos; G. Perdikakis; F. Recchia; T. Redpath; T. Roger; F. Rotaru; S. Saenz; M. -G. Saint-Laurent; D. Smalley; D. Sohler; M. Stanoiu; S. R. Stroberg; J. C. Thomas; M. Vandebrouck; D. Weisshaar; A. Westerberg

2015-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Supporting Flexible Business Processes with a Progression Model  

E-Print Network [OSTI]

Supporting Flexible Business Processes with a Progression Model Nicole Stavness Department with information systems to contend with changing business processes, and to support diverse workflow. Model that support flexible business processes. The progression model tracks a user's interaction when using

Schneider, Kevin A.

442

Method of forming supported doped palladium containing oxidation catalysts  

DOE Patents [OSTI]

A method of forming a supported oxidation catalyst includes providing a support comprising a metal oxide or a metal salt, and depositing first palladium compound particles and second precious metal group (PMG) metal particles on the support while in a liquid phase including at least one solvent to form mixed metal comprising particles on the support. The PMG metal is not palladium. The mixed metal particles on the support are separated from the liquid phase to provide the supported oxidation catalyst.

Mohajeri, Nahid

2014-04-22T23:59:59.000Z

443

Application of on-line monitoring techniques to nuclear plant data  

SciTech Connect (OSTI)

The use of empirical models for On-Line Monitoring (OLM) of safety critical instrumentation for calibration reduction has been investigated for over a decade. To help support the regulatory review of possible license amendments, a series of three NUREG/CRs are being developed, The first volume in this series, entitled NUREG/CR-6895 'Technical Review of On-line Monitoring Techniques for Performance Assessment Volume I: State-of-the-Art', offers a general overview of current sensor calibration monitoring technologies and their uncertainty analysis, a review of the supporting information necessary for assessing these techniques, and a cross reference between the literature and the requirements previously outlined by the NRC. Volume II, 'Theoretical Issues', presents an in-depth theoretical study and independent review of the most widely used OLM techniques. It includes a presentation of the theory and further explanation of the assumptions inherent in empirical models and uncertainty quantification techniques. The third and final volume; 'Limiting Case Studies', presents the results of applying OLM models to a wide variety of plant data. Specifically, Volume III summarizes six case studies investigating the effects of model development and assumptions on model performance and offers recommendations for identifying and handling these limiting cases. This paper discusses the six cases studies. Although this study is not an exhaustive review of the many issues in OLM system development, it provides a base set of considerations which must be accounted for and a method for testing these considerations with other model architectures. (authors)

Garvey, D.; Garvey, J.; Seibert, R.; Hines, J. W. [Nuclear Engineering Dept., Univ. of Tennessee, Knoxville, TN 37996-2300 (United States); Arndt, S. A. [U.S. Nuclear Regulatory Commission, Office of Nuclear Regulatory Research, Washington, DC 2055 (United States)

2006-07-01T23:59:59.000Z

444

Disability & Dyslexia Support Service (DDSS) Consent to Share Information Form  

E-Print Network [OSTI]

Disability & Dyslexia Support Service (DDSS) Consent to Share Information Form Please print By registering with the Disability and Dyslexia Support Service (DDSS) I understand that I am subscribed

Li, Yi

445

Low-Temperature Hydrocarbon/CO Oxidation Catalysis in Support...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

& Publications Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI Emission Control Low-Temperature HydrocarbonCO Oxidation Catalysis in Support of HCCI...

446

Integrated Virtual Lab in Supporting Heavy Duty Engine and Vehicle...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Virtual Lab in Supporting Heavy Duty Engine and Vehicle Emission Rulemaking Integrated Virtual Lab in Supporting Heavy Duty Engine and Vehicle Emission Rulemaking Presentation...

447

DOE Awards Small Business Contract for Support, Planning Services...  

Energy Savers [EERE]

Awards Small Business Contract for Support, Planning Services to Office of Environmental Management DOE Awards Small Business Contract for Support, Planning Services to Office of...

448

Characterizing Surface Acidic Sites in Mesoporous-Silica-Supported...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Surface Acidic Sites in Mesoporous-Silica-Supported Tungsten Oxide Catalysts Using Solid State NMR and Quantum Characterizing Surface Acidic Sites in Mesoporous-Silica-Supported...

449

Single Supported Atoms Participate in Catalytic Processes | ornl...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Functional Materials for Energy Single Supported Atoms Participate in Catalytic Processes December 04, 2014 Pathways for NO oxidation on single Pt atoms supported on the (010)...

450

Leveraging Tribal Renewable Resources to Support Military Energy...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Leveraging Tribal Renewable Resources to Support Military Energy Goals Leveraging Tribal Renewable Resources to Support Military Energy Goals May 30-31, 2013 Image of a speaker at...

451

Dominican Republic-Regional Programme for LAC: Support for the...  

Open Energy Info (EERE)

LAC: Support for the Preparation of the National Climate Change Policy (Redirected from UNDP-Dominican Republic Regional Programme for LAC - Support for the preparation of the...

452

Energy Department Finalizes $646 Million Loan Guarantee to Support...  

Energy Savers [EERE]

Energy Department Finalizes 646 Million Loan Guarantee to Support Innovative Solar Power Plant Energy Department Finalizes 646 Million Loan Guarantee to Support Innovative Solar...

453

Synthesis of supported carbon nanotubes in mineralized silica...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

supported carbon nanotubes in mineralized silica-wood composites. Synthesis of supported carbon nanotubes in mineralized silica-wood composites. Abstract: Multiwall carbon...

454

Protective Force Protocols for ESS Supported Performance Tests...  

Broader source: Energy.gov (indexed) [DOE]

Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12, 2007 Protective Force Protocols for ESS Supported Performance Tests and Exercises, March 12,...

455

EPA Tribal Training and Outreach Support for the American Indian...  

Office of Environmental Management (EM)

Tribal Training and Outreach Support for the American Indian Air Quality Training Program EPA Tribal Training and Outreach Support for the American Indian Air Quality Training...

456

Special Delivery for Sustainability: Clean Cities Supports UPS...  

Broader source: Energy.gov (indexed) [DOE]

Special Delivery for Sustainability: Clean Cities Supports UPS in Expanding Natural Gas Operations Special Delivery for Sustainability: Clean Cities Supports UPS in Expanding...

457

Department of Energy Issues Loan Guarantee Supported by Recovery...  

Office of Environmental Management (EM)

Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project September...

458

Department of Energy Issues Loan Guarantee Supported by Recovery...  

Energy Savers [EERE]

Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada Geothermal Project Department of Energy Issues Loan Guarantee Supported by Recovery Act for Nevada...

459

Department of Energy Technical Support Document National Environmental...  

Broader source: Energy.gov (indexed) [DOE]

Energy Technical Support Document National Environmental Policy Act Implementing Procedures Supplement to Notice of Proposed Rulemaking Proposed Changes and Supplemental Supporting...

460

Unified Resolve 2014: A Proof of Concept for Radiological Support...  

Office of Environmental Management (EM)

Unified Resolve 2014: A Proof of Concept for Radiological Support to Incident Commanders Unified Resolve 2014: A Proof of Concept for Radiological Support to Incident Commanders...

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

FY 2014 Scientific Infrastructure Support for Consolidated Innovative...  

Office of Environmental Management (EM)

4 Scientific Infrastructure Support for Consolidated Innovative Nuclear Research FOA FY 2014 Scientific Infrastructure Support for Consolidated Innovative Nuclear Research FOA The...

462

Department of Energy Launches Website Supporting Energy-Saving...  

Office of Environmental Management (EM)

Website Supporting Energy-Saving Reconstruction in the Gulf Coast Department of Energy Launches Website Supporting Energy-Saving Reconstruction in the Gulf Coast November 22, 2005...

463

Energy Department Announces $3 Million to Support Clean Energy...  

Energy Savers [EERE]

Energy Department Announces 3 Million to Support Clean Energy Businesses and Entrepreneurs Energy Department Announces 3 Million to Support Clean Energy Businesses and...

464

Energy Department Finalizes Loan Guarantee to Support California...  

Broader source: Energy.gov (indexed) [DOE]

to Support California Solar Generation Project Energy Department Finalizes Loan Guarantee to Support California Solar Generation Project September 30, 2011 - 3:15pm Addthis...

465

DOE Awards Small Business Task Order for Technical Support to...  

Office of Environmental Management (EM)

nuclear energy research. Addthis Related Articles DOE Awards Support Service Contract DOE Awards Small Business Task Order for Technical Support to the Office of...

466

DOE Awards Small Business Contract to Support Cleanup of New...  

Energy Savers [EERE]

Task Order for Disposal of Los Alamos National Lab Waste DOE Awards Support Service Contract DOE Awards Small Business Contract for Support, Planning Services to Office of...

467

SEP Success Story: "Green Launching Pad" Supports Clean Energy...  

Office of Environmental Management (EM)

SEP Success Story: "Green Launching Pad" Supports Clean Energy Small Businesses SEP Success Story: "Green Launching Pad" Supports Clean Energy Small Businesses May 24, 2012 -...

468

Energy Department and USDA Partner to Support Energy Efficiency...  

Broader source: Energy.gov (indexed) [DOE]

USDA Partner to Support Energy Efficiency in Rural Communities Energy Department and USDA Partner to Support Energy Efficiency in Rural Communities February 28, 2013 - 9:45am...

469

Private Company Uses EERE-Supported Chemistry Model to Substantially...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

Private Company Uses EERE-Supported Chemistry Model to Substantially Improve Combustion Engine Simulation Software Private Company Uses EERE-Supported Chemistry Model to...

470

Self-Supporting Budget Budget to Actual Comparison  

E-Print Network [OSTI]

Self-Supporting Budget Budget to Actual Comparison System Administration University of Nevada-12 Self Supporting Budgets Budget to Actual Comparison Introduction

Hemmers, Oliver

471

Categorization of Used Nuclear Fuel Inventory in Support of a...  

Broader source: Energy.gov (indexed) [DOE]

Categorization of Used Nuclear Fuel Inventory in Support of a Comprehensive National Nuclear Fuel Cycle Strategy Categorization of Used Nuclear Fuel Inventory in Support of a...

472

award supports development: Topics by E-print Network  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Bruce D. 4 Award for Graduate Students Who Obtain External Support Maximum Award: 2,000 Engineering Websites Summary: Award for Graduate Students Who Obtain External Support...

473

Voluntary Protection Program Onsite Review, Hanford Mission Support...  

Office of Environmental Management (EM)

Hanford Mission Support Contract - October 2011 Voluntary Protection Program Onsite Review, Hanford Mission Support Contract - October 2011 October 2011 Evaluation to determine...

474

Department of Energy Announces New Partnerships to Support Manufacturi...  

Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

New Partnerships to Support Manufacturing Job Training Department of Energy Announces New Partnerships to Support Manufacturing Job Training June 29, 2011 - 12:00am Addthis...

475

Understanding Atom Probe Tomography of Oxide-Supported Metal...  

Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

Atom Probe Tomography of Oxide-Supported Metal Nanoparticles by Correlation with Atomic Resolution Electron Understanding Atom Probe Tomography of Oxide-Supported Metal...

476

Energy measurement utilizing on-line chromatograph  

SciTech Connect (OSTI)

Most gas contracts today have at least a BTU specification and many use MMBTU (million BTU) rather than gas volume for custody transfer measurement. Gas chromatography is today being chosen more and more because the calculations of the gas volumes in modem electronic flow meters requires not only BTU{sub 5} information, but specific gravity, Mol % CO{sub 2} and Mol % N{sub 2}. The new AGA-8 supercompressibility equations also require a complete hydrocarbon analysis. What then, is a BTU? BTU is the acronym for British Thermal Unit. One BTU is the quantity of heat required to raise the temperature of one pound of water from 58.5{degrees}F to 59.5{degrees}F (about 1055.056 joules (SI))3. The higher the BTU content, the more energy can be obtained from burning the gas. It just doesn`t take as many cubic feet of gas to heat the home hot water tank if the gas is 1090 BTU instead of 940 BTU per SCF. The BTU, then, is a prime indicator of natural gas quality. An MMBTU{sup 2} is calculated by: BTU/CF * MMCF = MMBTU What is it worth to keep track of the natural gas BTU? If we postulate 1000 BTU/CF as fairly average for natural gas, and {+-} 5% error between doing a lab determination of the heating value on a spot sample of the gas and an on- line (nearly continuous) monitor of the heating value, this results in a {+-} 50 BTU difference. On a station that has 50 MMCF per day at $2.50 per MCF or MMBTU, this is $125,000.00 worth of gas per day. Five percent of this is $6,250.00 per day. If a process chromatograph, $50,000 installed cost, is used to determine the energy content a pay out of less than 10 days is obtained on a 50 MMCF/day station. Most major interconnects have on- line BTU measurement of some sort today.

Kizer, P.E. [Applied Automation, Inc./Hartmann and Braun, Houston, TX (United States)

1995-12-01T23:59:59.000Z

477

Longevity of Emplacement Drift Ground Support Materials  

SciTech Connect (OSTI)

The purpose of this analysis is to evaluate the factors affecting the longevity of emplacement drift ground support materials and to develop a basis for the selection of materials for ground support that will function throughout the preclosure period of a potential repository at Yucca Mountain. REV 01 ICN 01 of this analysis is developed in accordance with AP-3.10Q, Analyses and Models, Revision 2, ICN 4, and prepared in accordance with the Technical Work Plan for Subsurface Design Section FY 01 Work Activities (CRWMS M&O 2001a). The objective of this analysis is to update the previous analysis (CRWMS M&O 2000a) to account for related changes in the Ground Control System Description Document (CRWMS M&O 2000b), the Monitored Geologic Repository Project Description Document, which is included in the Requirements and Criteria for Implementing a Repository Design that can be Operated Over a Range of Thermal Modes (BSC 2001), input information, and in environmental conditions, and to provide updated information on candidate ground support materials. Candidate materials for ground support are carbon steel and cement grout. Steel is mainly used for steel sets, lagging, channel, rock bolts, and wire mesh. Cement grout is only considered in the case of grouted rock bolts. Candidate materials for the emplacement drift invert are carbon steel and granular natural material. Materials are evaluated for the repository emplacement drift environment based on the updated thermal loading condition and waste package design. The analysis consists of the following tasks: (1) Identify factors affecting the longevity of ground support materials for use in emplacement drifts. (2) Review existing documents concerning the behavior of candidate ground support materials during the preclosure period. (3) Evaluate impacts of temperature and radiation effects on mechanical and thermal properties of steel. Assess corrosion potential of steel at emplacement drift environment. (4) Evaluate factors affecting longevity of cement grouts for fully grouted rock bolt system. Provide updated information on cement grout mix design for fully grouted rock bolt system. (5) Evaluate longevity of materials for the emplacement drift invert.

D.H.Tang

2001-05-30T23:59:59.000Z

478

Living and Working Safely Around High-Voltage Power Lines.  

SciTech Connect (OSTI)

High-voltage transmission lines can be just as safe as the electrical wiring in the homes--or just as dangerous. The crucial factor is ourselves: they must learn to behave safely around them. This booklet is a basic safety guide for those who live and work around power lines. It deals primarily with nuisance shocks due to induced voltages, and with potential electric shock hazards from contact with high-voltage lines. References on possible long-term biological effects of transmission lines are shown. In preparing this booklet, the Bonneville Power Administration has drawn on more than 50 years of experience with high-voltage transmission. BPA operates one of the world`s largest networks of long-distance, high-voltage lines. This system has more than 400 substations and about 15,000 miles of transmission lines, almost 4,400 miles of which are operated at 500,000 volts.

United States. Bonneville Power Administration.

2001-06-01T23:59:59.000Z

479

Radio frequency communication system utilizing radiating transmission lines  

DOE Patents [OSTI]

A radio communication system for use in tunnels, mines, buildings or other shielded locations in which a pair of radiating transmission lines (30), (31) extend through such location in spaced coextensive relation to each other. Each transmission line (30), (31) has at least one unidirectional amplifier (32), (33) interposed therein with the sense of the unidirectional amplifier (32) of one transmission line (30) being opposite to the sense of the unidirectional amplifier (33) of the other transmission line (31). Each of the amplifiers (32), (33) has a gain which is less than the coupling loss between the transmission lines (30), (31). Two or more mobile transceivers (35) in the location served by the system are coupled to the transmission lines (30), (31) by electromagnetic wave propagation in space in order to communicate directly with each other at a given radio frequency within the frequency range of the system.

Struven, Warren C. (San Carlos, CA)

1984-01-01T23:59:59.000Z

480

Sensor, method and system of monitoring transmission lines  

DOE Patents [OSTI]

An apparatus, method, and system for measuring the magnetic field produced by phase conductors in multi-phase power lines. The magnetic field measurements are used to determine the current load on the conductors. The magnetic fields are sensed by coils placed sufficiently proximate the lines to measure the voltage induced in the coils by the field without touching the lines. The x and y components of the magnetic fields are used to calculate the conductor sag, and then the sag data, along with the field strength data, can be used to calculate the current load on the line and the phase of the current. The sag calculations of this invention are independent of line voltage and line current measurements. The system applies a computerized fitter routine to measured and sampled voltages on the coils to accurately determine the values of parameters associated with the overhead phase conductors.

Syracuse, Steven J.; Clark, Roy; Halverson, Peter G.; Tesche, Frederick M.; Barlow, Charles V.

2012-10-02T23:59:59.000Z

Note: This page contains sample records for the topic "triage lines support" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Hyperreal Waves on Transfinte, Terminated, Distortionless and Lossless, Transmission Lines  

E-Print Network [OSTI]

A prior work (see Chapter 8 of the book, ``Graphs and Networks: Transfinite and Nonstandard,'' Birkhauser-Boston, Cambridge, Mass., USA, 2004) examined the propagation of an electromagnetic wave on a transfinite transmission line, transfinite in the sense that infinitely many one-way infinite transmission lines are connected in cascade. That there are infinitely many such one-way infinite lines results in the wave propagating without ever reflecting at some discontinuity. The present work examines the cascade where the cascade terminates after only finitely many one-way infinite transmission lines, with the result that reflected waves are now produced at both the far end as well as at the initial end of the transfinite transmission line. The question of whether the reflected waves are infini tesimal or appreciable and whether they sum to an infinitesimal or appreciable amount are resolved for both distortionless and lossless lines. Finally, the generalizations to higher ranks of transfiniteness is briefly summarized.

A. H. Zemanian

2004-06-10T23:59:59.000Z

482

On-line monitoring of incinerator emissions  

SciTech Connect (OSTI)

As part of efforts to develop an on-line emissions monitor to detect specific organic compounds for incinerators, the authors tested a Fourier transform infrared spectrometer (FTIR) coupled with a long-path cell (LPC). A mixture of toluene, chlorobenzene, 1,1,1-trichloroethane, and trichloroethylene with elemental ratio C:H:Cl = 3:3.1:0.9 was incinerated in a methane/air flame. The effluent was continuously passed through a heated long-path cell. Eleven target compounds were simultaneously analyzed: methane, toluene, chlorobenzene, 1,1,1-trichloroethane, trichloroethylene, benzene, ethylene, hydrogen chloride, carbon monoxide, carbon dioxide, and water. During the testing, the incinerator temperature and the excess air ratio were deliberately changed to simulate both complete and incomplete combustion conditions in the incinerator. Test results indicate that the FTIR/LPC system can successfully follow concentration changes in the emissions that are associated with the change in the incinerator operations. In addition to carbon monoxide, methane, ethylene, and benzene have been found to be major products of incomplete combustion of the mixture. In this paper, the authors also discuss problems related to obtaining representative calibration standards and to developing adequate methods for continuous monitoring of emissions.

Mao, Zhuoxiong; Demirgian, J.C.; Hwang, E.

1993-07-01T23:59:59.000Z

483

Second Line of Defense Spares Program  

SciTech Connect (OSTI)

During Fiscal Year 2012, a team from the Pacific Northwest National Laboratory (PNNL) conducted an assessment and analysis of the Second Line of Defense (SLD) Sustainability spare parts program. Spare parts management touches many aspects of the SLD Sustainability Program including contracting and integration of Local Maintenance Providers (LMP), equipment vendors, analyses and metrics on program performance, system state of health, and maintenance practices. Standardized spares management will provide better data for decisions during site transition phase and will facilitate transition to host country sustainability ownership. The effort was coordinated with related SLD Sustainability Program initiatives, including a configuration items baselining initiative, a metrics initiative, and a maintenance initiative. The spares study has also led to pilot programs for sourcing alternatives that include regional intermediate inventories and partnering agreements that leverage existing supply chains. Many partners from the SLD Sustainability program contributed to and were consulted in the course of the study. This document provides a description of the findings, recommendations, and implemented solutions that have resulted from the study.

Henderson, Dale L.; Holmes, Aimee E.; Muller, George; Mercier, Theresa M.; Brigantic, Robert T.; Perkins, Casey J.; Cooley, Scott K.; Thorsen, Darlene E.

2012-11-20T23:59:59.000Z

484

Contingency Analysis of Cascading Line Outage Events  

SciTech Connect (OSTI)

As the US power systems continue to increase in size and complexity, including the growth of smart grids, larger blackouts due to cascading outages become more likely. Grid congestion is often associated with a cascading collapse leading to a major blackout. Such a collapse is characterized by a self-sustaining sequence of line outages followed by a topology breakup of the network. This paper addresses the implementation and testing of a process for N-k contingency analysis and sequential cascading outage simulation in order to identify potential cascading modes. A modeling approach described in this paper offers a unique capability to identify initiating events that may lead to cascading outages. It predicts the development of cascading events by identifying and visualizing potential cascading tiers. The proposed approach was implemented using a 328-bus simplified SERC power system network. The results of the study indicate that initiating events and possible cascading chains may be identified, ranked and visualized. This approach may be used to improve the reliability of a transmission grid and reduce its vulnerability to cascading outages.

Thomas L Baldwin; Magdy S Tawfik; Miles McQueen

2011-03-01T23:59:59.000Z

485

Slow sound in lined flow ducts  

E-Print Network [OSTI]

We consider the acoustic propagation in lined flow duct with a purely reactive impedance at the wall. This reacting liner has the capability to reduce the speed of sound, and thus to enhance the interaction between the acoustic propagation and the low Mach number flow ($M\\simeq0.3$). At the lower frequencies, there are typically 4 acoustic or hydrodynamic propagating modes, with 3 of them propagating in the direction of the flow. Above a critical frequency, there are only 2 propagating modes that all propagate in the direction of the flow. From the exact 2D formulation an approximate 1D model is developed to study the scattering of acoustic waves in a straight duct with varying wall impedance. This simple system, with a uniform flow and with a non-uniform liner impedance at the wall, permits to study the scattering between regions with different waves characteristics. Several situations are characterized to show the importance of negative energy waves, strong interactions between acoustic and hydrodynamic mod...

Auregan, Yves

2015-01-01T23:59:59.000Z

486

Monolithic torpedo bottle lining at Weirton Steel Corporation  

SciTech Connect (OSTI)

In late 1992 and early 1993 Weirton Steel burned through three torpedo bottles in a three-month period. To determine the cause of the burn throughs, a thorough review of bottle maintenance practices was initiated. Upon identification of contributing factors, changes in operating practices were made. In an effort to increase bottle reliability, lining trials were initiated. Among the trials, a monolithic lining was installed and this paper will discuss results of the lining to date.

Baker, R.; Griffith, E. [Weirton Steel Corp., WV (United States)

1996-12-31T23:59:59.000Z

487

Determination of age in forensic dentistry from cemental incremental lines  

E-Print Network [OSTI]

discrimination of incremental lines with accuracy and repeatability. Therefore, the purposes of this study are (1) to develop a technique for enhancing the incremen al lines n the dental cementum; (2) to evaluate the accuracy of age estimates based... economically applied to evaluate and count the incremental lines in the dental cementum. In this study nondemineralized cross-sections of human teeth were evaluated. This method was cnosen because the decalcification process is not only a time...

Sousa, Eliane Marques Duarte de

1987-01-01T23:59:59.000Z

488

DOE-EPRI On-Line Monitoring Implementation Guidelines  

SciTech Connect (OSTI)

Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasability of on-line monitoring at several participating nuclear plants. The results have been very enouraging, and substantial progress is anticipated in the coming years.

E. Davis, R. Bickford

2003-01-02T23:59:59.000Z

489

TRANSPORT OF WASTE SIMULANTS IN PJM VENT LINES  

SciTech Connect (OSTI)

The experimental work was conducted to determine whether there is a potential for waste simulant to transport or 'creep' up the air link line and contaminate the pulse jet vent system, and possibly cause long term restriction of the air link line. Additionally, if simulant creep occurred, establish operating parameters for washing down the line. The amount of the addition of flush fluids and mixer downtime must be quantified.

Qureshi, Z

2007-02-21T23:59:59.000Z

490

DOE-EPRI On-Line Monitoring Implementation Guidelines  

SciTech Connect (OSTI)

OAK B139 Industry and EPRI experience at several plants has shown on-line monitoring to be very effective in identifying out-of-calibration instrument channels or indications of equipment-degradation problems. The EPRI implementation project for on-line monitoring has demonstrated the feasibility of on-line monitoring at several participating nuclear plants. The results have been very encouraging, and substantial progress is anticipated in the coming years.

E. Davis; R. Bickford

2003-01-02T23:59:59.000Z

491

W87 JTA4 Forward Support Assembly  

SciTech Connect (OSTI)

The purpose of this project was to establish the capability to manufacture the forward supports to the original specifications with one of the original cable grooves widened for JTA4 use. The resin system used in the original version of the part was Keramid 601, which was no longer available since it was shown to be a carcinogen. Much of the existing processing knowledge had been lost, and several changes had been made to the requirements since the last production run. The main processing steps include molding, machining, and assembly. All three steps were addressed in this project. Operations that required development are detailed in the text of the paper. This report summarizes the major steps taken to re-establish the manufacturing capability for the forward supports as well as issues seen during the development of these processes.

LePlant, Steve

2011-06-08T23:59:59.000Z

492

ARAC: A support capability for emergency managers  

SciTech Connect (OSTI)

This paper is intended to introduce to the non-radiological emergency management community the 20-year operational history of the Atmospheric Release Advisory Capability (ARAC), its concept of operations, and its applicability for use in support of emergency management decision makers. ARAC is a centralized federal facility for assessing atmospheric releases of hazardous materials in real time, using a robust suite of three-dimensional atmospheric transport and diffusion models, extensive geophysical and source-description databases, automated meteorological data acquisition systems, and experienced staff members. Although originally conceived to respond to nuclear accidents, the ARAC system has proven to be extremely adaptable, and has been used successfully during a wide variety of nonradiological hazardous chemical situations. ARAC represents a proven, validated, operational support capability for atmospheric hazardous releases.

Pace, J.C.; Sullivan, T.J.; Baskett, R.L. [and others

1995-08-01T23:59:59.000Z

493

Site Support Program Plan Infrastructure Program  

SciTech Connect (OSTI)

The Fiscal Year 1996 Infrastructure Program Site Support Program Plan addresses the mission objectives, workscope, work breakdown structures (WBS), management approach, and resource requirements for the Infrastructure Program. Attached to the plan are appendices that provide more detailed information associated with scope definition. The Hanford Site`s infrastructure has served the Site for nearly 50 years during defense materials production. Now with the challenges of the new environmental cleanup mission, Hanford`s infrastructure must meet current and future mission needs in a constrained budget environment, while complying with more stringent environmental, safety, and health regulations. The infrastructure requires upgrading, streamlining, and enhancement in order to successfully support the site mission of cleaning up the Site, research and development, and economic transition.

NONE

1995-09-26T23:59:59.000Z

494

Tube support grid and spacer therefor  

DOE Patents [OSTI]

A tube support grid and spacers therefor provide radially inward preloading of heat exchange tubes to minimize stress upon base welds due to differential thermal expansion. The grid comprises a concentric series of rings and spacers with opposing concave sides for conforming to the tubes and V-shaped ends to provide resilient flexibility. The flexibility aids in assembly and in transmitting seismic vibrations from the tubes to a shroud. The tube support grid may be assembled in place to achieve the desired inwardly radial preloading of the heat exchange tubes. Tab and slot assembly further minimizes stresses in the system. The radii of the grid rings may be preselected to effect the desired radially inward preloading.

Ringsmuth, Richard J. (Solano Beach, CA); Kaufman, Jay S. (Del Mar, CA)

1986-01-01T23:59:59.000Z

495

Operations Plan for Support Network Development  

SciTech Connect (OSTI)

This report describes the operational processes and strategies that are building a support network for the National Security Technology Incubator (NSTI) program. The NSTI program currently is under development as part of the National Security Preparedness Project (NSPP), funded by Department of Energy (DOE)/National Nuclear Security Administration (NNSA) Grant No. DE FG52-07NA28084. Although the NSTI program offers a wide array of in-house business services, there are a certain number of services that will be provided by entities outside of Arrowhead Center. This report identifies the steps needed to develop an appropriate support network. The Arrowhead Center is working with external service providers and key stakeholders to establish feasible referral and implementation mechanics offering NSTI program participants the most comprehensive incubation services possible.

None

2008-06-30T23:59:59.000Z

496

Supporting Knowledge Transfer through Decomposable Reasoning Artifacts  

SciTech Connect (OSTI)

Technology to support knowledge transfer and cooperative inquiry must offer its users the ability to effectively interpret knowledge structures produced by collaborators. Communicating the reasoning processes that underlie a finding is one method for enhancing interpretation, and can result in more effective evaluation and application of shared knowledge. In knowledge management tools, interpretation is aided by creating knowledge artifacts that can expose their provenance to scrutiny and that can be transformed into diverse representations that suit their consumers perspectives and preferences. We outline the information management needs of inquiring communities characterized by hypothesis generation tasks, and propose a model for communication, based in theories of hermeneutics, semiotics, and abduction, in which knowledge structures can be decomposed into the lower-level reasoning artifacts that produced them. We then present a proof-of-concept implementation for an environment to support the capture and communication of analytic products, with emphasis on the domain of intelligence analysis.

Pike, William A.; May, Richard A.; Turner, Alan E.

2007-01-03T23:59:59.000Z

497

Network support for system initiated checkpoints  

DOE Patents [OSTI]

A system, method and computer program product for supporting system initiated checkpoints in parallel computing systems. The system and method generates selective control signals to perform checkpointing of system related data in presence of messaging activity associated with a user application running at the node. The checkpointing is initiated by the system such that checkpoint data of a plurality of network nodes may be obtained even in the presence of user applications running on highly parallel computers that include ongoing user messaging activity.

Chen, Dong; Heidelberger, Philip

2013-01-29T23:59:59.000Z

498

Dairy Price and Income Support Policy.  

E-Print Network [OSTI]

TDoe Z TA245.7 8873 NO.1588 B-1588 Texas Agricultural Extension Service ~ ~ ________________________________ aD ________ __ ~ A~PC LIB R A R Y AGRICULTURAL' FOOD POLICY CENTER SEP 2 7 1988 x s A&M Universit DAIRY PRICE AND INCOME SUPPORT... POLICY Texas Agricultural Extension Service. Zerle L. Carpenter, Director. The Texas A&M University System. College Station, Texas Contents 1. Policy Perspectives, Problems, Goals and Tools .................... 1 2. Cost Pricing...

Schwart, Robert B. Jr; Knutson, Ronald D.; Cropp, Robert; Harris, Harold M.; Jacobson, Robert E.; Novakovic, Andrew

1988-01-01T23:59:59.000Z

499

Infinite Support Vector Machines in Speech Recognition  

E-Print Network [OSTI]

Infinite Support Vector Machines in Speech Recognition Jingzhou Yang, Rogier C. van Dalen and Mark Gales Department of Engineering, University of Cambridge Trumpington Street, Cambridge, CB2 1PZ, UK {jy308,rcv25,mjfg}@eng.cam.ac.uk Abstract... ., Secaucus, NJ, USA, 2006. [14] Carl Edward Rasmussen, The infinite Gaussian mixture model, in Advances in Neural Information Processing Systems 12. 2000, pp. 554560, MIT Press. [15] Yee Whye Teh, Dirichlet processes, in Encyclopedia of Ma- chine...

Yang, Jingzhou; van Dalien, Rogier C.; Gales, M. J. F.

2013-01-01T23:59:59.000Z

500

Orthonormal bases of compactly supported wavelets  

E-Print Network [OSTI]

Abstract. Several variations are given on the construction of orthonormal bases of wavelets with compact support. They have, respectively, more symmetry, more regularity, or more vanishing moments for the scaling function than the examples constructed in Daubechies [Comm. Pure Appl. Math., 41 (1988), pp. 909-996]. Key words, wavelets, orthonormal bases, regularity, symmetry AMS(MOS) subject classifications. 26A16, 26A18, 26A27, 39B12

Ingrid Daubechies

1988-01-01T23:59:59.000Z