Powered by Deep Web Technologies
Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Radiological Control Training for Supervisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

3-2001 3-2001 August 2001 Change Notice No 1. with Reaffirmation January 2007 DOE HANDBOOK Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Radiological Control Training for Supervisors

2

Radiological Worker Training - Radiological Control Training for Supervisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A A December 2008 DOE HANDBOOK Radiological Worker Training Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 iii Foreword This Handbook describes an implementation process for training as recommended in

3

DOE-HDBK-1143-2001; Radiological Control Training for Supervisors - Student's Guide, Part 4 of 5  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Training for Supervisors Control Training for Supervisors DOE-HDBK-1143-2001 Student's Guide Office of Environment, Safety & Health U.S. Department of Energy Radiological Control Training for Supervisors DOE-HDBK-1143-2001 Student's Guide This page intentionally left blank. ii Radiological Control Training for Supervisors DOE-HDBK-1143-2001 Student's Guide Table of Contents Page Occupational Radiation Protection Program Policy and Guidance Review..................1-1

4

DOE-HDBK-1143-2001; Radiological Control Training for Supervisors - Overheads  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Control Training for Supervisors Control Training for Supervisors DOE-HDBK-1143-2001 Overheads Office of Environment, Safety & Health U.S. Department of Energy Radiological Control Training for Supervisors DOE-HDBK-1143-2001 Overheads This page intentionally left blank. ii OT 1.1 DOE-HDBK-1143-2001 Overhead 1.1 Regulatory Documents Objectives: * Identify the hierarchy of regulatory documents. * Define the purposes of 10 CFR Parts 820, 830 and 835. * Define the purpose of the DOE Radiological Control Standard. OT 1.2 DOE-HDBK-1143-2001 Overhead 1.2 Regulatory Documents (cont.) Objectives: * Define the terms

5

DOE handbook: Guide to good practices for the selection, training, and qualification of shift supervisors  

SciTech Connect

This Department of Energy (DOE) handbook is approved for use by all DOE Components and their contractors. The Handbook incorporates editorial changes to DOE-STD-1061-93, ``Guide to Good Practices for the Selection, Training, and Qualification of shift Supervisors,`` and supersedes DOE-STD-1061-93. Technical content of this Handbook has not changed from the original technical standard. Changes are primarily editorial improvements, redesignation of the standard to a Handbook, and format changes to conform with current Technical Standards Program procedures. This guide, used in conjunction with a facility-specific job analysis, provides a framework for the selection, training, qualification, and professional development of reactor facility and non-reactor nuclear facility shift supervisors. Training and qualification programs based on this guide should provide assurance that shift supervisors perform their jobs safely and competently.

NONE

1999-04-01T23:59:59.000Z

6

DOE-HDBK-1143-2001; Radiological Control Training for Supervisors - Student's Guide  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

43-2001 43-2001 Student's Guide Notes I. Introduction II. Problem analysis Supervisors of radiological workers are often faced with critical decisions. Providing a model for strategic decision making will ensure that these critical decisions are made in an efficient, rational manner. Module 6-1 Radiological Control Training for Supervisors DOE-HDBK-1143-2001 Student's Guide Notes A. Stating the mission In making decisions, the organization's mission and resultant goals should always be considered. Decisions should be consistent with the stated mission of the organization. Prior to decision making, the organization's mission must be defined. This may be difficult if the organization's

7

DOE-HDBK-1143-2001; Radiological Control Training for Supervisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SENSITIVE DOE-HDBK-1143-2001 August 2001 DOE HANDBOOK Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Radiological Control Training for Supervisors DOE-HDBK-1143-2001 Foreword This Handbook describes an implementation process for training as recommended in

8

Testing, Training, and Signature Devices | Y-12 National Security...  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing, Training, and ... Testing, Training, and Signature Devices Y-12 manufactures specialized uranium testing, training, and signature devices to support the nuclear detection...

9

DOE-HDBK-1143-2001; Radiological Control Training for Supervisors - Course Introduction  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

143-2001 143-2001 Instructor's Guide DEPARTMENT OF ENERGY LESSON PLAN Course Material Topic: Administrative Policies and Procedures Objectives: Upon completion of this training, the student will be able to: 1. Identify the radiological controlled areas a person should be allowed to enter after successfully completing General Employee Radiological Training, Radiological Worker I training, and Radiological Worker II training. 2. List five actions used to increase the awareness level of workers relating to proper radiological work practices. 3. Identify three conditions when a "Stop Radiological Work" should be initiated. 4. Identify the actions that should be performed, prior to recommencement of work, after a "Stop Radiological Work" order has been initiated.

10

DOE-HDBK-1119-99; DOE Handbook; Guide to Good Practices for the Selection, Training, and Qualification of Shift Supervisors  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

9-99 9-99 April 1999 Superseding DOE-STD-1061-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR THE SELECTION, TRAINING, AND QUALIFICATION OF SHIFT SUPERVISORS U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 487-4650. DOE-HDBK-1119-99 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

11

JOBAID-ASSIGNING AN ALTERNATE SUPERVISOR (SUPERVISOR)  

Energy.gov (U.S. Department of Energy (DOE))

The purpose of this job aid is to guideyou through the step-by-step process of managing alternate supervisors within SuccessFactors Learning.

12

Testing, Training, and Signature Devices | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing, Testing, Training, and ... Testing, Training, and Signature Devices Y-12 manufactures specialized uranium testing, training, and signature devices to support the nuclear detection community. As part of our national security mission, and in partnership with Oak Ridge National Laboratory, we are producing unique test objects for passive gamma ray signature analysis. Y-12 is fabricating new Highly Enriched Uranium Equivalent Radiological Signature Training Devices, tools that use an innovative method to replicate a much larger mass of uranium. These objects contain small amounts of U-235 embedded in an aluminum alloy. When seen by a detector, however, the gamma ray signature is nearly equivalent to a much larger amount of U-235, due to the alloying effect that minimizes the uranium

13

Radiological Worker Training - Radiological Safety Training for Radiation Producing (X-Ray) Devices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

C C December 2008 DOE HANDBOOK Radiological Worker Training Radiological Safety Training for Radiation Producing (X-Ray) Devices U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008 Program Management ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008 Program Management

14

APS Area Emergency Supervisors  

NLE Websites -- All DOE Office Websites (Extended Search)

Area Emergency Supervisors BUILDING AES AAES 400-EAA Raul Mascote Debra Eriksen-Bubulka 400-A (SPX) Tim Jonasson 400-Sectors 25-30 Reggie Gilmore 401-CLO Steve Downey Ed Russell...

15

Worker's Compensation for Supervisors Briefing | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Worker's Compensation for Supervisors Briefing Worker's Compensation for Supervisors Briefing Worker's Compensation for Supervisors Briefing September 25, 2013 9:00AM to 1:00PM EDT Registration link: CHRIS (002497/0003) Course type: Classroom Course Location: DOE Forrestal Building, Room 8E-089 Course Description: The briefing will give first level supervisors/managers a broader range of information that will enable Department of Energy supervisors to follow proper procedures and control compensation costs. The briefing will provide information on the topics related to the supervisor's responsibility when employees file a claim, the types of claims, medical and monetary compensation involved in covering the injured worker. The training will also cover the Power Initiative to get employees back to work and the agency's responsibility in reducing lost

16

JOBAID-REGISTRATION (SUPERVISOR) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Phone 202-586-9552 More Documents & Publications JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR) JOBAID-ASSIGNING AN ALTERNATE SUPERVISOR (SUPERVISOR) JOBAID-ASSIGNING...

17

Radiological Worker Training - Radiological Control Training...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A December 2008 DOE HANDBOOK Radiological Worker Training Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION...

18

New Employee Training Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

All New Employees New Supervisors New Employee Training Requirements Welcome to Berkeley Lab We value you and the talents that you bring to our workplace. The training listed...

19

Clear Communication Skills for Managers and Supervisors | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Clear Communication Skills for Managers and Supervisors Clear Communication Skills for Managers and Supervisors Clear Communication Skills for Managers and Supervisors February 26, 2014 8:30AM EST to February 27, 2014 4:00PM EST Registration Procedure: Please use the Corporate Human Resource Information System (CHRIS) Workflow process to request training enrollment. Course Code: 002441 Session Number: 0001. Cost: $400. For organizations not currently using the CHRIS workflow process, please follow your existing interoffice training registration process. The Office of Learning and Workforce Development (HC-20) will assess the course cost for this training session directly through each Headquarters organization's Working Capital Fund account. Field office participants should register via CHRIS. They should ensure to note the cost of the

20

Supervisor: Opponent: Reviewers:  

E-Print Network (OSTI)

Text entry by eye gaze is used by people with severe motor disabilities. An eye tracking device follows the users eye movements, and a computer program analyzes the gaze behavior. To type by gaze, the user typically points at the characters on an on-screen keyboard by looking at them and selects them by means of dwell time, a prolonged gaze that separates an intentional command from casual viewing. The basic methods for producing text by gaze have been researched and in real-world use since the early 1980s; however, the design issues have not been studied in detail. Until recently, assistive eye tracking systems were used mostly by a small number of people who were totally paralyzed and for whom gaze control was a necessity and the only option. The technology and its usability have improved considerably, and several new systems have appeared on the market, making the technology available for a much wider group of users with varying need and abilities. Today, the eye tracker can be considered an optional assistive device worth

Prof Dr; Anke Huckauf

2009-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Supervisor  

E-Print Network (OSTI)

Shopping is often a process that requires more planning and frustration than it should. For example: in one household a family member decides what should be bought, but another does the actual shopping. This can lead to items being bought that shouldnt and vice versa. The Cellphone Shopper system seeks to make shopping easier by solving problems like this. By allowing users to specify what they wish bought and where, and other users being able to view and buy these items while on the move, it is hoped that shopping will no longer be a source of frustration. This report details the design of the Cellphone

Graham Hunter; Dr. Hussein Suleman

2007-01-01T23:59:59.000Z

22

SESCDP Supervisor's Evaluation of Candidate's Performance During...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Assignment Form used by SES Supervisor to evaluate a SES candidate's performance in terms of meeting assignment objectives, an overall rating of the candidate's performance,...

23

Simulation and training of lumbar punctures using haptic volume rendering and a 6DOF haptic device  

E-Print Network (OSTI)

Simulation and training of lumbar punctures using haptic volume rendering and a 6DOF haptic device needle insertion and rotation. An improved haptic volume rendering approach is used to calculate the forces. This approach makes use of label data of relevant structures like skin, bone, muscles or fat

Lübeck, Universität zu

24

JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR) | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

VIEWING AN EMPLOYEE MATRIX (SUPERVISOR) JOBAID-VIEWING AN EMPLOYEE MATRIX (SUPERVISOR) The purpose of this job aid is to guide supervisor users through the step-by-step process of...

25

Electrical Network Supervisor Status Report  

E-Print Network (OSTI)

During year 2000 CERN has installed the Electrical Network Supervisor (ENS) for the monitoring and control of the equipment of the electrical distribution network located in about 100 substations throughout the different sites. In the first phase the system has been installed in parallel with the original CERN-developed system and databases and mimic diagrams have been prepared to cover parts of the distribution network. The system has been integrated with the general ST supervision systems for alarms monitoring and measurement logging, and the data from the ENS are gradually being integrated. In the second phase an extension of the system has been tested to include a direct industrial interface with the electrical equipment without the need for the existing CERN equipment interfaces. During the 2000-2001 shutdown the supervision will be renovated in a number of zones to operate a complete industrial system covering all aspects of the supervision from equipment interfaces to end-user applications.

Poulsen, S

2001-01-01T23:59:59.000Z

26

JOBAID-MANAGING EMPLOYEES (SUPERVISORS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Phone 202-586-9552 More Documents & Publications JOBAID-MANAGING LEARNNIG ACTIVITIES (SUPERVISOR) JOBAID-REGISTRATION (SUPERVISOR) JOBAID-VIEWING AN EMPLOYEE MATRIX...

27

Mandatory Supervisory Training Requirements  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mandatory Supervisory Training Requirements Mandatory Supervisory Training Requirements All DOE supervisors, managers, and executives will comply with mandatory supervisory training requirements (5 CFR 412; 5 CFR 315.801; 5 CFR 315.901; DOE O 360.1; and DOE O 320.1): * New supervisors: 80 hours of supervisory training, with 40 hours required to be completed during the supervisory probationary period. * Experienced supervisors: minimum of 8 hours of supervisory training each year. The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training requirements. The DOE courses Supervisory Essentials (32 hours) and Navigating the Federal Hiring Process (8 hours) are required to fulfill the first year 40-hour training

28

Radiological Safety Training for Radiation-Producing (X-RAY) Devices  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Change Notice No. 2 Change Notice No. 2 with Reaffirmation January 2007 DOE HANDBOOK RADIOLOGICAL SAFETY TRAINING FOR RADIATION-PRODUCING (X-RAY) DEVICES U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1109-97 ii Available on the Department of Energy Technical Standards Program Web site at http://www.hss.energy.gov/NuclearSafety/techstds/ DOE-HDBK-1109-97 iii Note: The page numbers refer to Change Notice 1 of the standard which was issued in February 2002. The changes have been incorporated in the Adobe PDF file posted on the DOE Technical Standards Web Site. Change Notice No. 1. RADIOLOGICAL SAFETY TRAINING FOR RADIATION-

29

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 Appendix A Change Notice 2 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ ii Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 Foreword This Handbook describes an implementation process for training as recommended in

30

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 Appendix A Change Notice 2 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training Radiological Control Training for Supervisors U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ ii Radiological Worker Training - Appendix A Radiological Control Training for Supervisors DOE-HDBK-1130-2008 Foreword This Handbook describes an implementation process for training as recommended in

31

CCBP: CLEAR COMMUNICATION SKILLS FOR MANAGERS AND SUPERVISORS...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CLEAR COMMUNICATION SKILLS FOR MANAGERS AND SUPERVISORS CCBP: CLEAR COMMUNICATION SKILLS FOR MANAGERS AND SUPERVISORS November 6, 2013 8:30AM EST to November 7, 2013 4:00PM EST...

32

Examination of supervisor assessments of employee work-life conflict, supervisor support, and subsequent outcomes  

E-Print Network (OSTI)

Research in the work-life area has typically concerned individuals' assessments of their own conflict. The current study went beyond this by examining supervisor assessments of employee conflict and how they relate to the support given to employees. This support, traditionally measured using a unidimensional measure of support, was measured with a multidimensional measure that differentiates eight separate forms of support, including listening, emotional, emotional challenge, reality confirmation, task appreciation, task challenge, tangible assistance, and personal assistance support. Additionally, the amount of personal contact between the supervisor and the employee and the extent to which the supervisor likes the employee were examined as potential moderators of the relationship between supervisor assessments and the support given. Further, employee satisfaction with supervisor support, as well as the potential moderating role of the need for support on the relationship between the provided support and the employee's satisfaction with the support, were explored. Finally, employee satisfaction with the eight forms of support and subsequent outcomes (i.e., subsequent work-life conflict, job satisfaction, turnover intentions, organizational commitment, and job performance) as they relate to the provided support were examined. Data were collected from 114 pairs of employees and supervisors. Employees were assessed at two time periods two weeks apart whereas supervisors were assessed at one time period, within five days of the employee's first time period. Results showed that supervisor assessments of employee work-life conflict were either unrelated or negatively related to the eight forms of support. Additionally, it appears that when supervisors perceived employees as having a high degree of work-to-life conflict, they provided relatively high and relatively equal amounts of emotional challenge and reality confirmation support to employees regardless of how much they liked them. When supervisors perceived employee work-to-life conflict as being low, however, they provided significantly more emotional challenge and reality confirmation support when they liked the employee as opposed to when they did not like the employee. Furthermore, the relationship between emotional challenge support and job satisfaction was mediated by satisfaction with emotional challenge support, the relationship between task appreciation support and affective commitment was mediated by satisfaction with task appreciation support, and the relationship between task appreciation support and job satisfaction was mediated by satisfaction with task appreciation support. Finally, when emotional challenge support was provided, greater levels of support led to greater employee satisfaction, especially if there was a need for the support. However, when reality confirmation support was provided, employees were less satisfied with the support when a large amount of support was provided and the employees' need for support was low.

Youngcourt, Satoris Sabrina

2005-12-01T23:59:59.000Z

33

Supervisory Training Requirements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supervisory Training Requirements Supervisory Training Requirements Supervisory Training Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental activities that will meet the supervisory training requirements. The DOE courses, Supervisory Essentials and Navigating the Federal Hiring Process are required to fulfill the first 40-hour of the probationary period mandatory training requirement for new supervisors. All other courses listed in the training framework are suggested to meet overall continual learning requirements. Supervisory Training Requirements More Documents & Publications EM's Development Program for New Managers/Supervisors Presentation DOE F 3315.1 Supervisory - Non-Supervisory Employee Performance Management and

34

training  

Science Conference Proceedings (OSTI)

... Engineers, Inc. (ASHRAE) This ASHRAE site provides training for participants in the standards development process. This ...

2012-12-13T23:59:59.000Z

35

EM's Development Program for New Managers/Supervisors Presentation  

Energy.gov (U.S. Department of Energy (DOE))

This development program provides new managers and supervisors with 80 hours of developmental activities during the first two years they are in a leadership position.

36

Microsoft Word - 2.4 Supervisors and PIs 0913.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Investigators All supervisors (including Principal Investigators, Group Leaders, and Program Heads) are responsible for ensuring that work is planned considering ES&H risks,...

37

EM's Development Program for New Managers/Supervisors  

Energy.gov (U.S. Department of Energy (DOE))

This development program provides new managers and supervisors with 80 hours of developmental activities during the first two years they are in a leadership position. The program meets OPM, DOE and...

38

Jonathan Lang Named 2008 PSC Supervisor of the Year  

NLE Websites -- All DOE Office Websites (Extended Search)

Keeping track of the damage Keeping track of the damage APS News Archives: 2012 | 2011 | 2010 | 2009 2008 | 2007 | 2006 | 2005 2004 | 2003 | 2002 | 2001 2000 Subscribe to APS News rss feed Jonathan Lang Named 2008 PSC Supervisor of the Year MARCH 11, 2009 Bookmark and Share Jonathan Lang (second from right) receiving his Supervisor of the Year Award from (left to right) Murray Gibson, George Srajer (XSD Associate Division Director) and Mark Beno (Acting XSD Division Director). Jonathan Lang, Magnetic Materials Group Leader in the Argonne X-ray Science Division, has been named the Photon Sciences (PSC) Supervisor of the Year for 2008. Lang was presented with his award by PSC Associate Laboratory Director Murray Gibson during the APS/Users Operations Monthly Meeting on February 18, 2009. In nominating Lang for the award, members of his group

39

Compositional Synthesis of Maximally Permissive Supervisors Using Supervision Equivalence  

Science Conference Proceedings (OSTI)

This paper presents a general framework for efficient synthesis of supervisors for discrete event systems. The approach is based on compositional minimisation, using concepts of process equivalence. In this context, a large number of ways are suggested ... Keywords: Controllability, Discrete event systems, Finite state automata, Model reduction, Nonblocking, Supervisory control, Synthesis

Hugo Flordal; Robi Malik; Martin Fabian; Knut kesson

2007-12-01T23:59:59.000Z

40

Mr. Thomas A. Dickerson Supervisor of Environmental Affairs  

Office of Legacy Management (LM)

3 3 932. . . - ,_ ' ,;. Department of Energy Washinglon.DC 20545 tie c"rT SEP 05 1990 pff, (>-.I Mr. Thomas A. Dickerson Supervisor of Environmental Affairs Carpenter Technology Corporation Engineering and Construction P. 0. Box 14662 Reading, Pennsylvania 19612-4662 Dear Mr. Dickerson: The Department of Energy (DOE) has completed its review of the preliminary radiological data from the surveys of your facility in Reading, Pennsylvania, completed in July and August 1988. We are pleased to inform you that the survey has verified that the radiological condition of your facility is in compliance with applicable DOE Guidelines and that no remedial action or further investigations are necessary. I am enclosing a copy of the survey report prepared by our

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Qualifying Official Training Handout - Sandia Site Office  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Handout Training Handout 1 of 2 SSO TQP QO Training Handout Revision 3, 1/10/2012 Responsibilities Qualifying officials (QOs) are responsible for performing the following:  Complete QO training and sign the attestation form and provide it to the requesting supervisor.  Prepare for qualification evaluations by reviewing the qualification standard competencies, applicable references and other necessary materials  Meet with participants to evaluate knowledge level  Conduct evaluations according to the guidance provided in the QO training and this document  Ensure that participants can demonstrate proficiency in the applicable competencies  Document when the participant meets or exceeds the requirements of the applicable competencies

42

Evaluation of S-101 course Supervisors' Orientation to Occupational Safety in DOE'' taught in Idaho Falls, Idaho, January 19--22, 1993  

SciTech Connect

This report summarizes trainee evaluations for the Safety Training Section course, Supervisors' Orientation to Occupational Safety in DOE'', (S-101) which was conducted January 19--22, 1993 at Idaho National Engineering Laboratory, in Idaho Falls, Idaho. Sections 1.1 and 1.2 of this report summarize the quantitative course evaluations that trainees provided upon completion of the course. Section 2.0 covers examination results, and Section 3.0 presents recommendations for course improvement. Appendix A provides a transcript of the trainees' written comments, and Appendix B provides the evaluation form.

Wright, T.S.

1993-03-01T23:59:59.000Z

43

Evaluation of S-101 course ``Supervisors` Orientation to Occupational Safety in DOE`` taught in Idaho Falls, Idaho, January 19--22, 1993  

SciTech Connect

This report summarizes trainee evaluations for the Safety Training Section course, ``Supervisors` Orientation to Occupational Safety in DOE``, (S-101) which was conducted January 19--22, 1993 at Idaho National Engineering Laboratory, in Idaho Falls, Idaho. Sections 1.1 and 1.2 of this report summarize the quantitative course evaluations that trainees provided upon completion of the course. Section 2.0 covers examination results, and Section 3.0 presents recommendations for course improvement. Appendix A provides a transcript of the trainees` written comments, and Appendix B provides the evaluation form.

Wright, T.S.

1993-03-01T23:59:59.000Z

44

Federal Employee Training Desk Reference | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Employee Training Desk Reference Federal Employee Training Desk Reference Federal Employee Training Desk Reference The DOE Federal Employee Training Desk Reference provides guidance on what is considered a training request, the approval and authorization for a training request and the allowable costs for training. The desk references also discusses the individual development plans (IDP) and the resposibilities the supervisor and employees have regarding the IDPs. Guidance on long-term and extended training is also provided. Computing the length and recording training time is also discussed. Also included in the desk reference is the integrated training management which discusses the need for a training needs assessment, the annual training plan and the annual training summary report. The desk reference also defines the

45

Federal Employee Training Desk Reference | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Federal Employee Training Desk Reference Federal Employee Training Desk Reference Federal Employee Training Desk Reference The DOE Federal Employee Training Desk Reference provides guidance on what is considered a training request, the approval and authorization for a training request and the allowable costs for training. The desk references also discusses the individual development plans (IDP) and the resposibilities the supervisor and employees have regarding the IDPs. Guidance on long-term and extended training is also provided. Computing the length and recording training time is also discussed. Also included in the desk reference is the integrated training management which discusses the need for a training needs assessment, the annual training plan and the annual training summary report. The desk reference also defines the

46

Measuring Devices: Liquefied Petroleum Gas Liquid ...  

Science Conference Proceedings (OSTI)

Liquefied Petroleum Gas Liquid-Measuring Devices. Intro about it. EPOs, Field Manual, Training Materials & Presentaions, Newsletter Articles, Other ...

2010-10-05T23:59:59.000Z

47

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 Appendix C December 2008 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training Radiological Safety Training for Radiation Producing (X-Ray) Devices U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008 Program Management This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ ii Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008

48

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 Appendix C December 2008 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training Radiological Safety Training for Radiation Producing (X-Ray) Devices U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008 Program Management This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ ii Radiological Worker Training - Appendix C Radiological Safety Training for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008

49

Library Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Library Training Library Training Get Library Training... Request Training 667-5809 Email This service is limited to LANL employees with active Z numbers. General Research Library...

50

Genomics assisted design of training populations of perennial forage and biofuel crops for predicting breeding value  

E-Print Network (OSTI)

and biofuel crops for predicting breeding value Supervisors: Leif Skøt (IBERS), Gancho improvement of crops for food, feedstock and biofuel is an urgent priority to meet with respect to training populations in perennial forage and biofuel crops, specifically

Millar, Andrew J.

51

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Program EHS 680 Spill Prevention, Control, and Countermeasures Training & Underground Storage Tank (UST) Facility Employee Training Course Syllabus Subject Category:...

52

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Operations Center (EOC) Training: These trainings are managed by LBNL's Protective Services Division. If you need any of the training below, please contact Hilda Quiroz...

53

SUPERVISOR RCV  

Science Conference Proceedings (OSTI)

... Physician, Teacher Mdico, Maestro ????? VERNON C. GRIGG III ??? ?????? C Attorney Abogado ?? SHEELA KINI ????? ...

2010-03-22T23:59:59.000Z

54

Abramovo Counterterrorism Training Center  

Science Conference Proceedings (OSTI)

The U.S. government has been assisting the Russian Federation (RF) Ministry of Defense (MOD) for many years with nuclear weapons transportation security (NWTS) through the provision of specialized guard escort railcars and cargo railcars with integrated physical security and communication systems, armored transport vehicles, and armored escort vehicles. As a natural continuation of the NWTS program, a partnership has been formed to construct a training center that will provide counterterrorism training to personnel in all branches of the RF MOD. The Abramovo Counterterrorism Training Center (ACTC) is a multinational, multiagency project with funding from Canada, RF and the U.S. Departments of Defense and Energy. ACTC will be a facility where MOD personnel can conduct basic through advanced training in various security measures to protect Category IA material against the threat of terrorist attack. The training will enhance defense-in-depth principles by integrating MOD guard force personnel into the overall physical protection systems and improving their overall response time and neutralization capabilities. The ACTC project includes infrastructure improvements, renovation of existing buildings, construction of new buildings, construction of new training facilities, and provision of training and other equipment. Classroom training will be conducted in a renovated training building. Basic and intermediate training will be conducted on three different security training areas where various obstacles and static training devices will be constructed. The central element of ACTC, where advanced training will be held, is the 'autodrome,' a 3 km road along which various terrorist events can be staged to challenge MOD personnel in realistic and dynamic nuclear weapons transportation scenarios. This paper will address the ACTC project elements and the vision for training development and integrating this training into actual nuclear weapons transportation operations.

Hayes, Christopher M [ORNL; Ross, Larry [U.S. Department of Energy; Lingenfelter, Forrest E [ORNL; Sokolnikov, Pavel I [ORNL; Kaldenbach, Karen Yvonne [ORNL; Estigneev, Yuri [Eleron; Murievav, Andrey [Eleron

2011-01-01T23:59:59.000Z

55

2013 Veterans Employee Training for FHM's | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Veterans Employee Training for FHM's Veterans Employee Training for FHM's 2013 Veterans Employee Training for FHM's July 15, 2013 12:45PM EDT COURSE: Veteran Employment Training for Federal Hiring Managers (FHM) REGISTER: Log in to your single sign on thru ESS and register in the OLC. Or you can register directly thru the OLC. Course Title: Veteran Empl Training for FHM Course ID: VET_FHM DESCRIPTION: Veteran Employment Training for Federal Hiring Managers (FHM). This course will familiarize managers and supervisors with Veteran employment options and the benefits provided to managers, the agency, and Veterans who are seeking Federal employment. The course explains how certain special appointing authorities can be used to increase the number of Veterans in the workplace and expedite the hiring process. There are three sections

56

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Program EHS 0243 Soldering Awareness Training Course Syllabus Subject Category: General Course Prerequisite: None Course Length: 30 Minutes Medical...

57

Measuring Devices  

Science Conference Proceedings (OSTI)

... Compressed Natural Gas Retail Motor-Fuel Dispensers; Hydrogen Measuring Devices; Liquefied Petroleum Gas Liquid-Measuring Devices; Loading ...

2010-10-05T23:59:59.000Z

58

Multimodal astronaut virtual training prototype  

Science Conference Proceedings (OSTI)

A few dedicated training simulator applications exist that mix realistic interaction devices-like real cockpits in flight simulators-with virtual environment (VE) components. Dedicated virtual reality (VR) systems have been utilized also in astronaut ...

Jukka Rnkk; Jussi Markkanen; Raimo Launonen; Marinella Ferrino; Enrico Gaia; Valter Basso; Harshada Patel; Mirabelle D'Cruz; Seppo Laukkanen

2006-03-01T23:59:59.000Z

59

DOE-HDBK-1117-99; Guide to Good Practices for Maintenance Supervisor Selection and Development  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7-99 7-99 October 1999 Superseding DOE-STD-1059-93 February 1993 DOE HANDBOOK GUIDE TO GOOD PRACTICES FOR MAINTENANCE SUPERVISOR SELECTION AND DEVELOPMENT U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS This document has been reproduced from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. DOE-HDBK-1117-99 iii FOREWORD 1. This Department of Energy (DOE) Handbook is approved for use by all DOE

60

Virtual Training for Welding  

Science Conference Proceedings (OSTI)

A mixed reality system has been created for simulating gas metal arc welding (GMAW) welding. This simulation system is intended for use in training human welders. The system is comprised of a real welding torch attached to a force feedback device, a ...

Kenneth Fast; Timothy Gifford; Robert Yancey

2004-11-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Lead-Construction Training: If you need to take any of the training listed below, please contact one of the following vendors to register for an offsite training session....

62

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training: If you need to take any of the training listed below, please contact one of the following vendors to register for an offsite training session. ABAG (Association of Bay...

63

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Hazard Waste OPSER Training: If you need to take any of the training listed below, please contact one of the following vendors to register for an offsite training session. ABAG...

64

TRAINING (TR)  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAINING (TR) TRAINING (TR) OBJECTIVE TRG.1 The selection, training and qualification programs for operations and operations support personnel have been established, documented, and implemented. The selection process and applicable position-specific training for managers assures competence commensurate with responsibilities. (The training and qualification program encompasses the range of duties and activities required to be performed.) (CR-3) Criteria * Training to support the SWS qualification programs for operations and operations support personnel shall be based on a systematic approach to training. (DOE Order 5480.20A, Chapter I) * Requirements for SWS continuing training have been adequately defined to ensure that operating organization personnel are qualified to perform job requirements.

65

AVESTAR - Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Meet Our Partners Simulators IGCC Gasification Combined Cycle NGCC SCOT Oxy-coal Shale Gas 3D Virtual IGCC Training How to Register for Training IGCC Gasification Combined...

66

Training Links  

NLE Websites -- All DOE Office Websites (Extended Search)

Courses NERSC Training Accounts Request Form Training Links OSF HPC Seminiars Software Accounts & Allocations Policies Data Analytics & Visualization Science Gateways User Surveys...

67

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

The LBNL Facilities Division administrative support schedules and coordinates this training. EHS0364 - Asbestos Class III - 4 hour Training EHS0368 - Asbestos Class III - 2 hour...

68

Training Needs Assessment Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Needs Assessment Training Training Needs Assessment Training The TNA PowerPoint Presentation is targeted for the training points of contacts whose organization's...

69

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

12 Consequence Assessment: This online training is provided by the Emergency Operations Training Academy (EOTA) Register as a user on the EOTA website: http:eota.doeal.gov Once...

70

EOC Training  

NLE Websites -- All DOE Office Websites (Extended Search)

08 Emergency CatClass Pt. 1: This online training is provided by the Emergency Operations Training Academy (EOTA) Register as a user on the EOTA website: http:eota.doeal.gov...

71

Training Materials  

Science Conference Proceedings (OSTI)

Training Materials. NIST Handbook 44 Self-Study Course. ... Chapter 3 Organization and Format of NIST Handbook 44 DOC. ...

2011-08-10T23:59:59.000Z

72

Collaborative Training  

Energy.gov (U.S. Department of Energy (DOE))

In a teamed effort, the U.S. Department of Energy's (DOE) Office of Health, Safety and Security (HSS) National Training Center (NTC), the National Institute of Environmental Health Sciences (NIEHS), Volpentest HAMMER Training and Education Center (HAMMER), Energy Facility Contractors Group (EFCOG), and labor unions work to identify and address worker health, safety and security training improvement needs across the DOE Complex.

73

SRS Training Information  

NLE Websites -- All DOE Office Websites (Extended Search)

SRS Web-Based Training Courses 2013 Consolidated Annual Training (CAT) Radiological Worker Training (RWT) Training Information General Employee Training (GET) Study Guide (PDF)...

74

NREL: Water Power Research - Device and Component Testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Testing NREL houses the nation's premier laboratory facilities for testing offshore wind and water power devices and maintains a staff of offshore-trained test engineers and...

75

Education & Training  

Energy.gov (U.S. Department of Energy (DOE))

Science and technology a critical sector of the U.S. economy. Learn about opportunities for education and training supported by the Energy Department.

76

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

1 Welding, Cutting, and Brazing Safety Training Course Syllabus Subject Category: Welding Course Prerequisite: None Course Length: 20 minutes Medical Approval: No Delivery Mode:...

77

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

4 Hazard Waste OPSER Training8hr refresher Course Syllabus Subject Category: Waste Management Course Prerequisite: EHS 650 or EHS 652 Course Length: 40 hours Medical Approval:...

78

Late Heavy Bombardment of the inner Solar System Supervisors: Dr Darren F. Mark1  

E-Print Network (OSTI)

the validity of the proposed LHB. Graduating with a strong background in geology and/or mathematics at the Scottish Universities Environmental Research Centre where you will be trained in isotope geochemistry and expected to make cuttingedge isotope measurements using the latest technological developments

Jose, Joemon M.

79

Supervisor's Guide to Developing Employee Career Plans Part 2 Presented by  

E-Print Network (OSTI)

) · Functional (fix, teach, code, design, research...) Transferable Skills Analysis 1. Ways to assess, selection, promotion, transfer, merit increase, salary, training and development, demotion, and separation Development and Performance Management · Maintain up-to-date job descriptions for all positions · Establish

Russell, Lynn

80

Electrochromic devices  

DOE Patents (OSTI)

An electrochromic device is disclosed having a selective ion transport layer which separates an electrochemically active material from an electrolyte containing a redox active material. The devices are particularly useful as large area architectural and automotive glazings due to there reduced back reaction.

Allemand, Pierre M. (Tucson, AZ); Grimes, Randall F. (Ann Arbor, MI); Ingle, Andrew R. (Tucson, AZ); Cronin, John P. (Tucson, AZ); Kennedy, Steve R. (Tuscon, AZ); Agrawal, Anoop (Tucson, AZ); Boulton, Jonathan M. (Tucson, AZ)

2001-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Fusion devices  

SciTech Connect

Three types of thermonuclear fusion devices currently under development are reviewed for an electric utilities management audience. Overall design features of laser fusion, tokamak, and magnetic mirror type reactors are described and illustrated. Thrusts and trends in current research on these devices that promise to improve performance are briefly reviewed. Twenty photographs and drawings are included. (RME)

Fowler, T.K.

1977-10-11T23:59:59.000Z

82

Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services Training Training Assistive Technology Forms Guidance Incident Management IT Services PKI Remote Access Training Cybersecurity Training Warehouse The OCIO offers a...

83

Coordinating overcurrent protection devices  

Science Conference Proceedings (OSTI)

Distribution, substation, and plant engineers can benefit from using an overcurrent protection program in commercial, industrial, and utility applications to aid in clearing temporary faults and isolating permanent faults. In the time it normally takes to check one coordination scheme manually, dozens of alternatives can be evaluated using a graphics-oriented program, because the engineer receives immediate feedback for quick decision-making. It is well known that accurately coordinating overcurrent protection devices can minimize or prevent equipment damage, and electrical power service to customers can be greatly improved. In addition to assisting experienced engineers, an overcurrent protection program is an excellent training tool for new engineers.

St. John, M.; Borgnino, A.

1996-07-01T23:59:59.000Z

84

Microelectromechanical safe arm device  

SciTech Connect

Microelectromechanical (MEM) apparatus and methods for operating, for preventing unintentional detonation of energetic components comprising pyrotechnic and explosive materials, such as air bag deployment systems, munitions and pyrotechnics. The MEM apparatus comprises an interrupting member that can be moved to block (interrupt) or complete (uninterrupt) an explosive train that is part of an energetic component. One or more latching members are provided that engage and prevent the movement of the interrupting member, until the one or more latching members are disengaged from the interrupting member. The MEM apparatus can be utilized as a safe and arm device (SAD) and electronic safe and arm device (ESAD) in preventing unintentional detonations. Methods for operating the MEM apparatus include independently applying drive signals to the actuators coupled to the latching members, and an actuator coupled to the interrupting member.

Roesler, Alexander W. (Tijeras, NM)

2012-06-05T23:59:59.000Z

85

Training  Access Training  CHRIS Training Workflow  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Using ESS to register for PMCDP training Using ESS to register for PMCDP training Find the course CHRIS Code/Session # on the PMCDP Training Schedule located on PMCDP's website http://energy.gov/management/downloads/pmcdp-course-schedule Login into ESS using mis.doe.gov/ESS From the tabs at the top of the screen, select Training  Access Training  CHRIS Training Workflow  Select ...Connect to CHRIS... tab 2 On the CHRIS page, from the Menu (left column) select the following path CHRIS Workflow  TrainingTraining Requests  Create/Modify Training Request From the Training Request tab screen Select Create Request in upper right corner 

86

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

5 ~ Bloodborne Pathogen Training for Researchers 5 ~ Bloodborne Pathogen Training for Researchers Course Syllabus Subject Category: Biosafety Course Prerequisite: No Course Length: 15 minutes Medical Approval: No Delivery Mode: Online Course Purpose: This course is required for researchers before starting work that involves potential exposure to bloodborne pathogen (BBP) materials such as BBPs and human blood, tissues, or cells. This course provides specific training elements required in the OSHA Bloodborne Pathogens Standard that are listed in the course content below. Supplementary and Refresher Courses: * EHS 739 (Biosafety Training for Researchers) and EHS 745 (Hepatitis B Medical Surveillance) must be taken in conjunction with this course. This course may be taken before or after taking these supplementary courses, but all courses must be

87

Training Videos  

NLE Websites -- All DOE Office Websites (Extended Search)

Screen Shot 2013 05 28 at 3.49.37 PM Using Hadoop for HPC October 6, 2011 NERSC Training Event with Lavanya Ramakrishnan, NERSC Read More 142197578100 Chemistry and...

88

Superconductive devices  

Science Conference Proceedings (OSTI)

Over the past 2 years there have been several suggestions advanced for computer devices which utilize the unique properties of superconductors. Some of these take advantage of the strong nonlinear dependence of resistance on magnetic field which makes ...

Albert E. Slade; Howard McMahon

1958-05-01T23:59:59.000Z

89

Device Performance  

DOE Green Energy (OSTI)

In the Device Performance group, within the National Center for Photovoltaic's Measurements and Characterization Division, we measure the performance of PV cells and modules with respect to standard reporting conditions--defined as a reference temperature (25 C), total irradiance (1000 Wm-2), and spectral irradiance distribution (IEC standard 60904-3). Typically, these are ''global'' reference conditions, but we can measure with respect to any reference set. To determine device performance, we conduct two general categories of measurements: spectral responsivity (SR) and current versus voltage (I-V). We usually perform these measurements using standard procedures, but we develop new procedures when required by new technologies. We also serve as an independent facility for verifying device performance for the entire PV community. We help the PV community solve its special measurement problems, giving advice on solar simulation, instrumentation for I-V measurements, reference cells, measurement procedures, and anomalous results. And we collaborate with researchers to analyze devices and materials.

Not Available

2006-06-01T23:59:59.000Z

90

Engineering Technical Training Modules - Flow Measurement Version 1.0  

Science Conference Proceedings (OSTI)

The purpose of this training module is to provide an understanding of calculating flow and the various types of flow measurement devices. The module also provides information related to device selection, installation, failure modes, calibration, and instrument error. This computer-based training (CBT) module is intended for use by new engineers as well as engineers changing jobs where basic knowledge of this subject is a new requirement. This training is intended to help individuals acquire basic knowled...

2011-10-21T23:59:59.000Z

91

Employee training, incentives boost conservation programs  

SciTech Connect

Hotel energy managers are finding that a cooperative and trained staff is a major factor in the success of conservation projects. Some managers go beyond training to offer cash bonus and other incentives. Training must be continuous because of the high turnover in personnel. Most of the training is geared to increasing employee awareness of conservation basics, such as turning off lights, heat, and air conditioning. It is as important for employees to take a personal interest in the size of the utility bill as it is for them to understand the sophisticated control devices. (DCK)

Alejandro, C.

1982-10-04T23:59:59.000Z

92

PLASMA DEVICE  

DOE Patents (OSTI)

A device for producing a confined high temperature plasma is described. In the device the concave inner surface of an outer annular electrode is disposed concentrically about and facing the convex outer face of an inner annular electrode across which electrodes a high potential is applied to produce an electric field there between. Means is provided to create a magnetic field perpendicular to the electric field and a gas is supplied at reduced pressure in the area therebetween. Upon application of the high potential, the gas between the electrodes is ionized, heated, and under the influence of the electric and magnetic fields there is produced a rotating annular plasma disk. The ionized plasma has high dielectric constant properties. The device is useful as a fast discharge rate capacitor, in controlled thermonuclear research, and other high temperature gas applications. (AEC)

Baker, W.R.; Brathenahl, A.; Furth, H.P.

1962-04-10T23:59:59.000Z

93

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

9 ~ Biosafety Training for Researchers 9 ~ Biosafety Training for Researchers Course Syllabus Subject Category: Biosafety Course Prerequisite: No Course Length: 60 minutes Medical Approval: No Delivery Mode: Online Course Purpose: This course ensures that researchers conducting work with biological materials or agents in LBNL laboratories understand standard and basic biosafety principles and requirements needed to: * Assess biosafety-related hazards and risks; and * Find, select, or use appropriate biosafety controls such as biosafety level 1 and 2 practices, equipment, and facilities Course Content: * Work planning and risk assessment * Biosafety containment levels * Personal Protective Equipment and clothing * Biosafety labels and signs * Facilities, equipment, and practices

94

Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

2 ~ Radioactive and Mixed Waste Generator Training 2 ~ Radioactive and Mixed Waste Generator Training Course Syllabus Subject Category: Waste Management Course Prerequisite: EHS 471 and EHS 472 or equiv. Course Length: 1 hour Medical Approval: None Delivery Mode: Classroom Course Purpose: Provide basic familiarization with requirements for radioactive and mixed waste generation, accumulation, and request for pick-up. Course Objectives: Upon completion of this course, students will be able to: * Protect Berkeley Lab staff and environment while managing radioactive waste * Manage the potential for radiation exposures using ALARA techniques * Properly characterize waste for appropriate management from point of generation through storage, treatment, and disposal

95

Electrochemical device  

DOE Patents (OSTI)

A tunnel protected electrochemical device features channels fluidically communicating between manifold, tunnels and cells. The channels are designed to provide the most efficient use of auxiliary power. The channels have a greater hydraulic pressure drop and electrical resistance than the manifold. This will provide a design with the optimum auxiliary energy requirements.

Grimes, Patrick G. (Westfield, NJ); Einstein, Harry (Springfield, NJ); Bellows, Richard J. (Westfield, NJ)

1988-01-12T23:59:59.000Z

96

Detection device  

DOE Patents (OSTI)

The present invention is directed to a detection device comprising: (1) an entrance chamber; (2) a central chamber; and (3) an exit chamber. The central chamber includes an ionizing gas, anode, and means for connecting the anode with an external power supply and pulse counter.

Smith, J.E.

1981-02-27T23:59:59.000Z

97

Training Management System  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam Time ESAF Contacts Calendars User Community Scientific Access Site AccessVisit Training Training Management System Argonne system used to track training requirements and...

98

Training Worksheet Job Aid  

NLE Websites -- All DOE Office Websites (Extended Search)

Worksheet Job Aid Maintained by Corporate Education, Development & Training (CEDT) Purchase Order A. General Awareness Sandia-Specific Training - Initial and Refresher Training...

99

Training | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam Time ESAF Contacts Calendars User Community Scientific Access Site AccessVisit Training See also: Argonne WBT Argonne eJHQ ASDACIS Training Courses Training All core...

100

Laser device  

DOE Patents (OSTI)

A laser device includes a virtual source configured to aim laser energy that originates from a true source. The virtual source has a vertical rotational axis during vertical motion of the virtual source and the vertical axis passes through an exit point from which the laser energy emanates independent of virtual source position. The emanating laser energy is collinear with an orientation line. The laser device includes a virtual source manipulation mechanism that positions the virtual source. The manipulation mechanism has a center of lateral pivot approximately coincident with a lateral index and a center of vertical pivot approximately coincident with a vertical index. The vertical index and lateral index intersect at an index origin. The virtual source and manipulation mechanism auto align the orientation line through the index origin during virtual source motion.

Scott, Jill R. (Idaho Falls, ID); Tremblay, Paul L. (Idaho Falls, ID)

2008-08-19T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

LOADING DEVICE  

DOE Patents (OSTI)

A device is presented for loading or charging bodies of fissionable material into a reactor. This device consists of a car, mounted on tracks, into which the fissionable materials may be placed at a remote area, transported to the reactor, and inserted without danger to the operating personnel. The car has mounted on it a heavily shielded magazine for holding a number of the radioactive bodies. The magazine is of a U-shaped configuration and is inclined to the horizontal plane, with a cap covering the elevated open end, and a remotely operated plunger at the lower, closed end. After the fissionable bodies are loaded in the magazine and transported to the reactor, the plunger inserts the body at the lower end of the magazine into the reactor, then is withdrawn, thereby allowing gravity to roll the remaining bodies into position for successive loading in a similar manner.

Ohlinger, L.A.

1958-10-01T23:59:59.000Z

102

SANS TRAINING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANS Training Voucher Program Registration Procedures For Federal Employees/Contractors Process: Currently, under this program, the OCIO will cover only registration fees for SANS courses. All travel costs are the responsibility of the Federal Employee/Contractor's employing organization. Every effort must be made to complete classes within the allotted time frame. Extension of on-line courses may be granted by SANS; however, this expense is to be covered by the employing organization. The employing organization must also reimburse the OCIO fees for any registered course the student does not complete. In addition, the OCIO will not pay for certification. Costs for certification testing related to the training must be covered by the employee or employing organization and submitted to SANS directly, no through the OCIO

103

Photon Sciences Training Courses  

NLE Websites -- All DOE Office Websites (Extended Search)

Photon Sciences Training & Qualification Requirements for Accelerator Photon Sciences Training & Qualification Requirements for Accelerator Operators Medical Surveillance BNL Web-Based Training (BNL) Web-Based Training (PSD) Web-Based Training (Help) Instructor-Led Training (BNL) Instructor-Led Training (PSD) Other Training Instructions Medical Surveillance Print the forms and follow the instructions to satisfy the requirement. Web-Based Training Complete the course online. Training credit is entered immediately into the trainee's training history on successful completion of the course. Instructor-Led Training Training is in-person and led by an instructor. Training may be in the form of a briefing, tour, classroom training, hands-on training, event scenario, and may require an exam. Click on the icon for the instructor's name.

104

ORISE: Training and Education  

NLE Websites -- All DOE Office Websites (Extended Search)

Capabilities Overview Research and Evaluation Public Health Communication Training and Education Instructional Design and Development Training and Qualification...

105

Federal Employee Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

the Chief Human Capital Officer the Chief Human Capital Officer Office of Learning and Workforce Development July 26, 2011 Federal Employee Training Desk Reference Federal Employee Training Federal Employee Training Page 2 of 53 July 26, 2011 Desk Reference Contents CHAPTER I. TRAINING REQUESTs, APPROVALs, AUTHORIZATIONS AND ALLOWABLE COSTs ........................................................................................................................................................... 3 1. TRAINING REQUESTS. ................................................................................................................. 3 2. TRAINING APPROVALS. .............................................................................................................. 3

106

NSLS Insertion Devices  

NLE Websites -- All DOE Office Websites (Extended Search)

Insertion Devices MGU-25 VUV Ring Insertion Devices X-Ray Ring Insertion Devices VISA NISUS Flux & Brightness of NSLS IDs Magnetic Measurement Lab...

107

Electrochromic device  

DOE Patents (OSTI)

An electrochromic device includes a first substrate spaced from a second substrate. A first conductive member is formed over at least a portion of the first substrate. A first electrochromic material is formed over at least a portion of the first conductive member. The first electrochromic material includes an organic material. A second conductive member is formed over at least a portion of the second substrate. A second electrochromic material is formed over at least a portion of the second conductive member. The second electrochromic material includes an inorganic material. An ionic liquid is positioned between the first electrochromic material and the second electrochromic material.

Schwendemanm, Irina G. (Wexford, PA); Polcyn, Adam D. (Pittsburgh, PA); Finley, James J. (Pittsburgh, PA); Boykin, Cheri M. (Kingsport, TN); Knowles, Julianna M. (Apollo, PA)

2011-03-15T23:59:59.000Z

108

Gripping device  

DOE Patents (OSTI)

This invention consists of a gripping device having at least two fingers: one movable finger and at least one stationary finger. The fingers are attached to a support by a collar, the movable finger being pivotally attached. The support carries an air cylinder with a shaft to actuate the movable finger. The movable finger has a wide portion with a slot. On the distal end of the air cylinder's shaft is a travelerthat rides int he slot and, as it does, causes the movable finger to pivot toward and away from the two stationary fingers.

Hapstack, M.

1991-04-08T23:59:59.000Z

109

OLED devices  

DOE Patents (OSTI)

An OLED device having an emission layer formed of an ambipolar phosphine oxide host material and a dopant, a hole transport layer in electrical communication with an anode, an electron transport layer in communication with a cathode, wherein the HOMO energy of the hole transport layer is substantially the same as the HOMO energy of the ambipolar host in the emission layer, and the LUMO energy of the electron transport layer is substantially the same as the LUMO energy of the ambipolar host in the emission layer.

Sapochak, Linda Susan [Arlington, VA; Burrows, Paul Edward [Kennewick, WA; Bimalchandra, Asanga [Richland, WA

2011-02-22T23:59:59.000Z

110

Last Name First Name Job Title Supervisor CourseTitle CourseDate RenewDate 2010 Health, Safety, and Radiation Training Report for Departments  

E-Print Network (OSTI)

Hager, Postdoctoral Research Associate (Gibson) 7. Dr. Robert Handler, Postdoctoral Scientist (Shonnard (Goldman) 45. Alex Munguia, Chemical Engineering (Shonnard) 46. Chelsea Nikula, Chemistry (Thompson) 47

Wilcock, William

111

Exploration of small enrollment speaker verification on handheld devices  

E-Print Network (OSTI)

This thesis explores the problem of robust speaker verification for handheld devices under the context of extremely limited training data. Although speaker verification technology is an area of great promise for security ...

Woo, Ram H. (Ram Han)

2005-01-01T23:59:59.000Z

112

PLASMA DEVICE  

DOE Patents (OSTI)

A device is described for establishing and maintaining a high-energy, rotational plasma for use as a fast discharge capacitor. A disc-shaped, current- conducting plasma is formed in an axinl magnetic field and a crossed electric field, thereby creating rotational kinetic enengy in the plasma. Such energy stored in the rotation of the plasma disc is substantial and is convertible tc electrical energy by generator action in an output line electrically coupled to the plasma volume. Means are then provided for discharging the electrical energy into an external circuit coupled to the output line to produce a very large pulse having an extremely rapid rise time in the waveform thereof. (AE C)

Baker, W.R.

1961-08-22T23:59:59.000Z

113

TEC Working Group Topic Groups Archives Training - Medical Training...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training - Medical Training Conference Call Summaries TEC Working Group Topic Groups Archives Training - Medical Training Conference Call Summaries Conference Call Summaries...

114

Weight and Measures Training  

Science Conference Proceedings (OSTI)

... many specific device technologies, on packaging ... use of web technology for offering ... Liquefied Petroleum Gas Liquid-Measuring Devices Instructor ...

2011-06-01T23:59:59.000Z

115

Laser device  

DOE Patents (OSTI)

A laser device includes a target position, an optical component separated a distance J from the target position, and a laser energy source separated a distance H from the optical component, distance H being greater than distance J. A laser source manipulation mechanism exhibits a mechanical resolution of positioning the laser source. The mechanical resolution is less than a spatial resolution of laser energy at the target position as directed through the optical component. A vertical and a lateral index that intersect at an origin can be defined for the optical component. The manipulation mechanism can auto align laser aim through the origin during laser source motion. The laser source manipulation mechanism can include a mechanical index. The mechanical index can include a pivot point for laser source lateral motion and a reference point for laser source vertical motion. The target position can be located within an adverse environment including at least one of a high magnetic field, a vacuum system, a high pressure system, and a hazardous zone. The laser source and an electro-mechanical part of the manipulation mechanism can be located outside the adverse environment. The manipulation mechanism can include a Peaucellier linkage.

Scott, Jill R. (Idaho Falls, ID); Tremblay, Paul L. (Idaho Falls, ID)

2007-07-10T23:59:59.000Z

116

Training | National Nuclear Security Administration  

National Nuclear Security Administration (NNSA)

Training Home > About Us > Our Programs > Nuclear Security > Nuclear Materials Management & Safeguards System > Training Training 2013 Annual Users Training Meeting Presentations...

117

ORISE: National Security Training Opportunities  

NLE Websites -- All DOE Office Websites (Extended Search)

CSEPP Training HSEEP Training Spokesperson Training Incident Command System Training Emergency Management Emergency Response Crisis and Risk Communication Forensic Science How...

118

Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP  

E-Print Network (OSTI)

Medical Technologies Innovation Training 2014 BIOINNOVATE FELLOWSHIP BioInnovate Ireland is now medical technology companies and for the development of innovative medical device products. Ireland's medical technology sector consists of over 250 companies, over 25,000 employees, and 13 of the world's top

Prinz, Friedrich B.

119

NUG 2013: Training -- Edison  

NLE Websites -- All DOE Office Websites (Extended Search)

Training -- Edison NUG 2013: Training -- Edison February 14, 2013 Edison Jeff3 Thursday, Feb. 14 - Training: Edison, NERSC's new Cray XC30 NERSC Oakland Scientific Facility 8:30 -...

120

Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Training Federal Technical Capability Program (FTCP) The Federal Technical Capability Panel (Panel) is responsible for overseeing the overall implementation of the Federal...

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

NERSC Training and Tutorials  

NLE Websites -- All DOE Office Websites (Extended Search)

Online Tutorials Courses NERSC Training Accounts Request Form Training Links OSF HPC Seminiars Software Accounts & Allocations Policies Data Analytics & Visualization Science...

122

Nevada STEP Training  

NLE Websites -- All DOE Office Websites (Extended Search)

to Provide Training For Hospital Personnel in Nevada CARLSBAD, N.M., January 15, 2001 - Radiation Management Consultants, Inc., (RMC) will host three separate hospital training...

123

Fire Protection Program: Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training DOE IAFF Training for Radiation Emergencies Hanford Fire Department Radiation Fundamentals for Emergency Responders For more information contact: Jim Bisker This page...

124

Training / Review Record  

NLE Websites -- All DOE Office Websites (Extended Search)

3 TrainingReview Record 091006 Page 1 of 4 EOTA - Business Form Document Title: Training Review Record Document Number: MGTF-003 Rev. 091006 Document Owner: Elizabeth Sousa...

125

TVDG Training Requirements  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Requirements TVDG Training Requirements information is now located at: http:www.bnl.govuserscenterTrainingtandem.asp. You will automatically be taken to the new...

126

Training | Advanced Photon Source  

NLE Websites -- All DOE Office Websites (Extended Search)

Beam Time ESAF Contacts Calendars User Community Scientific Access Site AccessVisit Training See also: Argonne WBT Argonne eJHQ APS Beamline Shielding ASDACIS Training Courses...

127

Safety Training - Cyclotron  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Training GERT All experimenters at the 88-Inch Cyclotron are required to take the General Employee Radiation Training (GERT) course, which can be found here: GERT Building...

128

ORISE: Mentor Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Mentor Training Mentor Training Oak Ridge Institute for Science and Education (ORISE) research participation programs depend heavily upon mentoring leadership and guidance from the...

129

ORISE: Training and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Training and Tools Chronic diseases such as diabetes, heart disease and cancer afflict more people every year and have resulted in increased demand for trained health care...

130

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

Join a Technical Commitee. TMS Volunteer Online Training. Select a training module below to begin a presentation. Firefox users please click here. Say YES to...

131

Training Program EHS 0611 ~ Universal Waste Regulatory Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment, Health, & Safety Training Program EHS 0611 Universal Waste Regulatory Training Course Syllabus Subject...

132

Thesis Supervisor Accepted by...  

E-Print Network (OSTI)

A plant can be considered to be capture-ready if, at some point in the future it can be retrofitted for carbon capture and sequestration and still be economical to operate. The concept of capture-ready is not a specific plant design; rather it is a spectrum of investments and design decisions that a plant owner might undertake during the design and construction of a plant. Power plant owners and policymakers are interested in capture-ready plants because they may offer relatively low cost opportunities to bridge the gap between current coal-fired generation technologies without CO2 capture to future plants that may be built from the start to capture CO2, and reduce the risks of possible future regulations of CO2 emissions. This thesis explores the design options, technologies and costs of capture-ready coal-fired power plants. The first part of the thesis outlines the two major designs that are being considered for construction in the near-term pulverized coal (PC) and integrated gasification/combined cycle (IGCC). It details the steps that are necessary to retrofit each of these plants for CO2 capture and sequestration. Finally, for each technology, it provides a qualitative

Mark C. Bohm; Howard J. Herzog; Dava J. Newman; Mark C. Bohm

2006-01-01T23:59:59.000Z

133

BNL Supervisors Meeting  

NLE Websites -- All DOE Office Websites (Extended Search)

splitting and oxidation. R. Adzic, et al., Nature Materials 8, 325 (2009) Macroscopic Graphene on Ruthenium Key bottleneck to realizing potential of graphene for applications:...

134

CONTROL LIMITER DEVICE  

DOE Patents (OSTI)

A control-limiting device for monltoring a control system is described. The system comprises a conditionsensing device, a condition-varying device exerting a control over the condition, and a control means to actuate the condition-varying device. A control-limiting device integrates the total movement or other change of the condition-varying device over any interval of time during a continuum of overlapping periods of time, and if the tothl movement or change of the condition-varying device exceeds a preset value, the control- limiting device will switch the control of the operated apparatus from automatic to manual control.

DeShong, J.A.

1960-03-01T23:59:59.000Z

135

Original Articles: Experimental design and genetic algorithm optimization of a fuzzy-logic supervisor for embedded electrical power systems  

Science Conference Proceedings (OSTI)

The embedded power systems are nowadays developing at high pace. Hybrid-electric vehicles, full-electric vehicles, airplanes, ships, high-speed trains, all share a common point - the embedded electrical power system. This paper aims to present an optimization ... Keywords: Embedded electrical power system, Energy storage, Experimental design, Fuzzy logic, Genetic algorithm, Optimization

Stefan Breban, Christophe Saudemont, SBastien Vieillard, BenoT Robyns

2013-05-01T23:59:59.000Z

136

Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Training Training October 16, 2013 - 5:17pm Addthis Training is critical to successfully implementing, operating, and maintaining renewable energy systems in new Federal construction or major renovation. This section outlines the different training needs of project management, design, and facility management staff. Designing and integrating a successful renewable energy project requires training on renewable energy system specifics, especially since systems are specialized components of a building project. Once in place, renewable energy system successful operation relies on the operations and maintenance (O&M) staff, who should fully understand the system and its interaction with other building systems. Training is necessary at various stages of a new construction or major

137

Disappearing mobile devices  

Science Conference Proceedings (OSTI)

In this paper, we extrapolate the evolution of mobile devices in one specific direction, namely miniaturization. While we maintain the concept of a device that people are aware of and interact with intentionally, we envision that this concept can become ... Keywords: gesture, input device, interaction technique, miniaturization, mobile device, sensor, ubicomp, wearable

Tao Ni; Patrick Baudisch

2009-10-01T23:59:59.000Z

138

Environment/Health/Safety (EHS) Training | Training Courses  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Training Courses All EHSS Training courses are listed below in descending order by course code. Online courses can be accessed directly. Classroom courses require...

139

Classification Training Institute Catalog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Classification Training Institute Catalog Classification Training Institute Catalog Enforcement Guidance Oversight Reporting Classification Classification Training Institute...

140

Engineering Technical Training Module (ETTM) - Instrumentation Sensing, Line Routing, and Separation Version 1.0  

Science Conference Proceedings (OSTI)

Engineering Technical Training Module (ETTM) Instrumentation Sensing, Line Routing, and Separation, Version 1.0 is a computer-based training module that allows users to access training when desired and review it at their own pace.This course provides training for Power Plant Instrumentation Engineers on instrumentation sensing line devices, their functions, and recommended use in nuclear plants. This module will familiarize the student with guidelines for routing and ...

2013-08-08T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

Laser Safety: A Laser Alignment Practical Training Course  

Science Conference Proceedings (OSTI)

SLAC National Accelerator Laboratory has developed a Laser Alignment Practical Training Course as one of its core laser safety classes. The course is taught to small groups of up to three students and takes 1-3 hours to complete. This practical course is not a substitute for site-specific On-the-Job Training; it does, however, provide a good introduction in core laser safety practices that can be broadly applied. Alignment and diagnostic tasks are performed with low power lasers. Students learn safe alignment and diagnostic techniques and how to avoid common mistakes that might lead to an accident. The class is taught by laser supervisors, enabling them to assess the skill level of new laser personnel and determine the subsequent level of supervision needed. The course has six alignment tasks. For each task, discussion points are given for the instructor to review with the students. The optics setup includes different wavelength lasers, a beam expander, mirrors, irises, a periscope, a beam-splitting polarizer and a diffraction grating. Diagnostic tools include viewing cards, an IR viewer and a ccd camera. Laser eyewear is available to block some laser wavelengths in the setup.

Woods, Michael

2011-01-26T23:59:59.000Z

142

Federal Energy Management Program: Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Loading the player ... FEMP trains Federal agency managers about the latest energy requirements, best practices, and technologies through eTraining Courses, First...

143

General Employee Radiological Training (GERT)  

NLE Websites -- All DOE Office Websites (Extended Search)

General Employee Radiological Training (GERT) Radiological Training for NSLS Access has been replaced with BNL General Employee Radiological Training (GERT). Please read the...

144

Piecewise training for structured prediction  

E-Print Network (OSTI)

K. (2006). Accelerated training of conditional random ?eldsmethods for discriminative training of dependency parsers (Sutton, C. (2008). Ef?cient training methods for conditional

Sutton, Charles; McCallum, Andrew

2009-01-01T23:59:59.000Z

145

Training Plan | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Plan Training Plan This template is used to define the plan, scope, environment, roles and responsibilities for training needs for systemsoftware development and...

146

Training Awards | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Awards Training Awards Descriptions of the projects that will be managed by the Office of Fossil Energy's National Energy Technology Laboratory. Training Awards More...

147

Separate Training Influences Relative Validity  

E-Print Network (OSTI)

concurrent inhibitory training of B were to alter respondingComparative Psychology Separate Training Influences RelativeDuring relative validity training, X was reinforced when

Mehta, Rick; Dumont, Jamie-Lynne; Combiadakis, Sharon; Williams, Douglas A.

2004-01-01T23:59:59.000Z

148

NSLS User Access | Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Training Training for New Users and Users with Expired Training and/or Badges: All new users and users with expired badges must complete or update the training modules shown below prior to access to the experimental floor. The training can be completed online prior to arrival at the NSLS and is strongly recommended to save considerable time during check-in at the Guest, User, Visitor (GUV) Center in Building 400. Please note each training module is followed by an exam which asks for your name and guest number. If you do not already have a guest number, leave this entry blank. All new users and users with expired badges MUST arrive on a weekday (no weekends or holidays) and check in at the GUV Center so that your training can be verified and to receive a photo ID badge (new or updated). The GUV

149

NUG Training 2012  

NLE Websites -- All DOE Office Websites (Extended Search)

NUG Training 2012 NERSC will present a two-day training workshop in conjuction with the 2012 meeting of the NERSC Users Group (NUG). The workshop is open to all NERSC users. The...

150

Unit Outline Training Guide  

E-Print Network (OSTI)

Unit Outline Builder Training Guide Document Status: Final Revision Number: 6.0 Revision Date: 14 Approved #12;Online Unit Outline Builder Training Guide Curtin University of Technology Page 2 TABLE................................................................................................................. 4 4. Log in and Select a Unit Outline

151

Argonne CNM: Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety Training Before performing work at the CNM, you must take certain safety training courses. We encourage you to take these courses remotely before you arrive at Argonne. Go...

152

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - Symposium Organizer. To view this presentation in full screen, click the image in the presentation.

153

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - Technical Committee Member. To view this presentation in full screen, click the image in the presentation.

154

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - Administrative Committee Members. To view this presentation in full screen, click the image in the presentation.

155

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - Technical Presenter. To view this presentation in full screen, click the image in the presentation.

156

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - Award Committee Member. To view this presentation in full screen, click the image in the presentation.

157

Radiological worker training  

SciTech Connect

This Handbook describes an implementation process for core training as recommended in Implementation Guide G441.12, Radiation Safety Training, and as outlined in the DOE Radiological Control Standard (RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing core training recommended by the RCS. This training is intended for radiological workers to assist in meeting their job-specific training requirements of 10 CFR 835. While this Handbook addresses many requirements of 10 CFR 835 Subpart J, it must be supplemented with facility-specific information to achieve full compliance.

NONE

1998-10-01T23:59:59.000Z

158

Pneumatic Conveyance Device  

The Pneumatic Conveyance Device is capable of dislodging, capturing, and conveying solid material, wet or dry, from a depth of 70+ feet, while discharging through a 100+ foot conveyance hose. The device was developed to remove water and solid ...

159

SYSTEMATIC APPROACH TO TRAINING  

E-Print Network (OSTI)

Keywords: training, nuclear safety, regulatory body, personnel, inspector, qualifications The report describes the experiences obtained of a training programme for nuclear power plant inspectors arranged in the 90s by the Radiation and Nuclear Safety Authority of Finland (STUK). In the implementation of the programme, a systematic method was used to analyse the training needs, to plan, develop and implement the training programme as well as to assess the programmes implementation and results. The method used, SATSystematic Approach to Training, is presented in Nuclear Power Plant Personnel Training and its Evaluation, A Guidebook, IAEA Technical Report Series No. 380, which is a publication of the International Atomic Energy Agency. It is recommended that this method be applied in the planning and implementation of nuclear power plant personnel training. The application of the method as a tool for developing the qualifications of nuclear power plant inspectors shows that the method is well suited for use in Finland. Until the 90s, STUK had no systematic approach to training activities. Some training was arranged internally, but training in most respects meant participation in external training events and international

Ilari Aro

1998-01-01T23:59:59.000Z

160

Diversity Training,Diversity Office  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Programs for Managers Equal Employment Opportunity, Affirmative Action, Diversity Management and Sexual Harassment prevention training classes are conducted by...

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

GAS DISCHARGE DEVICES  

DOE Patents (OSTI)

The construction of gas discharge devices where the object is to provide a gas discharge device having a high dark current and stabilized striking voltage is described. The inventors have discovered that the introduction of tritium gas into a discharge device with a subsequent electrical discharge in the device will deposit tritium on the inside of the chamber. The tritium acts to emit beta rays amd is an effective and non-hazardous way of improving the abovementioned discharge tube characteristics

Arrol, W.J.; Jefferson, S.

1957-08-27T23:59:59.000Z

162

Pulse detecting device  

DOE Patents (OSTI)

A device for measuring particle flux comprises first and second photodiode detectors for receiving flux from a source and first and second outputs for producing first and second signals representing the flux incident to the detectors. The device is capable of reducing the first output signal by a portion of the second output signal, thereby enhancing the accuracy of the device. Devices in accordance with the invention may measure distinct components of flux from a single source or fluxes from several sources.

Riggan, W.C.

1984-01-01T23:59:59.000Z

163

Residential Energy Display Devices  

Science Conference Proceedings (OSTI)

Residential energy display devices provide direct feedback to consumers about their electricity use and cost, direct feedback that potentially can help customers manage electricity consumption. EPRI tested five different stand-alone display devices in its Energy Efficiency and Demand Response Living Laboratory to assess whether devices functioned according to manufacturer specifications. In addition to providing results of these tests, this Technology Brief describes how display devices operate, summariz...

2008-06-20T23:59:59.000Z

164

Articulating feedstock delivery device  

DOE Patents (OSTI)

A fully articulable feedstock delivery device that is designed to operate at pressure and temperature extremes. The device incorporates an articulating ball assembly which allows for more accurate delivery of the feedstock to a target location. The device is suitable for a variety of applications including, but not limited to, delivery of feedstock to a high-pressure reaction chamber or process zone.

Jordan, Kevin

2013-11-05T23:59:59.000Z

165

Operated device estimation framework  

E-Print Network (OSTI)

Protective device estimation is a challenging task because there are numerous protective devices present in a typical distribution system. Among various protective devices, auto-reclosers and fuses are the main overcurrent protection on distribution systems. Operation of a protective device in response to a particular fault condition depends upon the protective devices operating behavior and coordination of various such protective devices. This thesis presents the design and implementation of a protective device estimation algorithm which helps in identifying which protective devices have operated to clear a short circuit condition. The algorithm uses manufacturers device details, power quality data measured from substation monitoring devices and power system event features estimated using existing DFA algorithms. The proposed technique can be used to evaluate coordination of these protective devices and helps in locating a fault in a distribution system feeder. This approach is independent of feeder topology and could be readily used for any distribution system. The effectiveness of this algorithm is verified by simulated and actual test data. Suggestions are included for future research and application by electric utilities.

Rengarajan, Janarthanan

2008-12-01T23:59:59.000Z

166

Portable data collection device  

DOE Patents (OSTI)

The present invention provides a portable data collection device that has a variety of sensors that are interchangeable with a variety of input ports in the device. The various sensors include a data identification feature that provides information to the device regarding the type of physical data produced by each sensor and therefore the type of sensor itself. The data identification feature enables the device to locate the input port where the sensor is connected and self adjust when a sensor is removed or replaced. The device is able to collect physical data, whether or not a function of a time.

French, Patrick D. (Aurora, CO)

1996-01-01T23:59:59.000Z

167

Unitary lens semiconductor device  

DOE Patents (OSTI)

A unitary lens semiconductor device and method. The unitary lens semiconductor device is provided with at least one semiconductor layer having a composition varying in the growth direction for unitarily forming one or more lenses in the semiconductor layer. Unitary lens semiconductor devices may be formed as light-processing devices such as microlenses, and as light-active devices such as light-emitting diodes, photodetectors, resonant-cavity light-emitting diodes, vertical-cavity surface-emitting lasers, and resonant cavity photodetectors.

Lear, Kevin L. (Albuquerque, NM)

1997-01-01T23:59:59.000Z

168

TEC Working Group Topic Groups Archives Training - Medical Training |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training - Medical Training Training - Medical Training TEC Working Group Topic Groups Archives Training - Medical Training The TEC Training and Medical Training Issues Topic Group was formed to address the training issues for emergency responders in the event of a radioactive material transportation incident. The Topic Group first met in 1996 to assist DOE in developing an approach to address radiological emergency response training needs and to avoid redundancy of existing training materials. The group worked with the Transportation Emergency Preparedness Program (TEPP) to review existing training material to determine its applicability, developed a front-end analysis describing an approach, and developed the Modular Emergency Response Radiological Transportation Training (MERRTT). In 1998, the Medical Training Issues

169

2002 Device Research Conference  

Science Conference Proceedings (OSTI)

Jun 26, 2002 ... Amtrak Train Service serves Santa Barbara. The. Amtrak terminal is located in downtown Santa. Barbara as well as in Goleta. From there, you...

170

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

171

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

172

Complete Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Complete Safety Training Print Complete Safety Training Print All users are required to take safety training before they may begin work at the ALS. It is the responsibility of the Principal Investigator and the Experimental Lead to ensure that all members of the team receive proper safety training before an experiment begins. Special consideration is available for NSLS users who have completed, and are up-to-date with, their safety training, NSLS Safety Module; they may take a brief equivalency course ALS 1010: Site-Specific Safety at the ALS in lieu of the complete safety training in ALS 1001: Safety at the ALS. These users must present documentation upon arrival at the ALS showing that they have completed NSLS Safety Module; see Acceptable NSLS Safety Documentation for examples.

173

Radiological Worker Training - Radiological Safety Training for...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

for Radiation-Producing (X-Ray) Devices DOE-HDBK-1130-2008 Program Management 19 Gamma-Ray Sources, Energies up to 10 MEV, ANSIHPS N43.3, American National Standards Institute,...

174

Training Warehouse | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Training » Training Warehouse Training » Training Warehouse Training Warehouse Training Warehouse Cybersecurity Training & Awareness A cyber-aware workforce is an empowered workforce. To support its role as a training service provider, the OCIO has developed an online repository, the Cybersecurity Training Warehouse, which provides direct access to cyber training and awareness resources and materials at no cost to the public. Additionally, this warehouse contains DOE-developed, role-based training program information as well as links to pertinent web sites that offer valuable training and awareness information and/or training opportunities. The resources contained on this website are available to any individual or organization involved with implementing awareness and training campaigns for their workforce or general user base.

175

Radiological Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Part 2 of 9 Radiological Control Technician Training Technician Qualification Standard Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii This page intentionally left blank. DOE-HDBK-1122-2009 iii Table of Contents Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Purpose of Qualification Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Phase I: RCT Academics Training . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . 1 Phase II: RCT Core Practical (JPMs) Training . . . . . . . . . . . . . . . . . .. . . . . . . 1

176

NDE Training Activities  

Science Conference Proceedings (OSTI)

One of the final steps in the technology transfer process is the training of personnel. Training personnel in fundamental and advanced NDE methods and techniques is a major theme of the NDE Center. Training is an essential part of NDE technology transfer and application. It is also an important element to maintaining the quality and supply of the NDE workforce serving the nuclear power industry. In-service inspection (ISI) of boiling water reactor (BWR) piping and pressurized water reactor (PWR) control ...

2005-11-09T23:59:59.000Z

177

Specialist Qualification Training (Revised)  

Science Conference Proceedings (OSTI)

This DOE Industrial Technologies Program fact sheet describes DOE's Specialist Qualification Training for experts in industrial compressed air, fan, pump, steam, and process heating systems.

Not Available

2007-04-01T23:59:59.000Z

178

Photon Sciences Training Courses  

NLE Websites -- All DOE Office Websites (Extended Search)

Photon Sciences Training Courses Beamline Ops (BLOSA) BNL Web Courses (Help) BNL Class Schedules Business Systems & Software Contractor Orientation Cranes, Forklifts, Aerial Lifts...

179

Examiner Training Logistics FAQs  

Science Conference Proceedings (OSTI)

... the three area airports, and the Shady Grove Metro Station (the subway ... during the training course, and one evening reception free of charge. ...

2013-07-30T23:59:59.000Z

180

2014 Examiner Training Schedule  

Science Conference Proceedings (OSTI)

... budgets for the upcoming year, please note that in 2014 the Baldrige Program will offer three weeks of Baldrige examiner training in Gaithersburg ...

2013-10-28T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Towards Comprehensive Training  

E-Print Network (OSTI)

This paper is the result of a joint partnership between the Social Protection Unit of the World Bank and the Korean Ministry of Labor on Skills Development. This partnership was aimed at better understanding the Korean skills development strategy and drawing lessons and best practices for developing countries. This paper benefited from the financial support of the Korean Ministry of Labor and the World Bank. The paper expresses the author's own views on the topic which are not necessarily those endorsed by the World Bank or the Korean Ministry of Labor. Abstract: Training programs are the most common active labor market interventions around the world. Whether designed to develop skills of young job seekers or upgrading skills of adult workers, training programs are aimed at counteracting employability barriers that hinder the integration of people into the labor markets. Training approaches vary greatly across countries and regions. Some have a focus on classroom lectures while others emphasize training in the workplace. Based on a dataset of studies of training programs from 90 countries around the world, this paper examines the incidence of different training types over time and their impact on labor market outcomes of trainees. We find a general pattern of transition from in-classroom training to comprehensive measures that combine classroom and workplace training with supplementary services. Moreover, this transition has paid off. Comprehensive training interventions tend to increase the probability of having positive labor market

Jean Fares; Olga Susana Puerto; Jean Fares; Olga Susana Puerto

2009-01-01T23:59:59.000Z

182

NanoFab Training  

Science Conference Proceedings (OSTI)

... Overview. User training is an important element of the NanoFab's safety program. Every person who enters the NanoFab ...

2013-09-24T23:59:59.000Z

183

ORISE: Spokesperson Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Spokesperson Training To prepare both government agencies and private organizations to manage the communication aspects of an emergency response, the Oak Ridge Institute for...

184

Training - Course Catalog  

NLE Websites -- All DOE Office Websites (Extended Search)

- Course Catalog Course 204 - Sample Preparation Laboratory Training (Core) Who Should Attend This course is mandatory for: * SLAC employees and non-employees who need unescorted...

185

ORISE: Epidemiology Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Epidemiology Training Epidemiological studies can provide valuable insight into health trends for workers and the public at large. Once a study is complete, however, it must be...

186

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

... application to embed a PowerPoint document in a web page. Until the issue is resolved you can download the Training presentation in PDF format below.

187

Prerecorded Training | ENERGY STAR  

NLE Websites -- All DOE Office Websites (Extended Search)

Prerecorded Training Secondary menu About us Press room Contact Us Portfolio Manager Login Facility owners and managers Existing buildings Commercial new construction Industrial...

188

General Employee Radiological Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution...

189

ORISE: Health physics training  

NLE Websites -- All DOE Office Websites (Extended Search)

surveys Health physics services Radiochemical analyses Health physics training How ORISE is Making a Difference Overview Environmental characterization at ORNL a...

190

Contributions to Training - CECM  

E-Print Network (OSTI)

May 23, 2001 ... Contributions to Training. Allan Wittkopf: I am co-supervising Allan for his Ph.D ( with M. Monagan of SFU). [Allan's Homepage] . Allan helped...

191

TMS: Volunteer Opportunities: Training  

Science Conference Proceedings (OSTI)

TMS Volunteer Online Training - TMS Board of Directors Orientation. To view this presentation in full screen, click the image in the presentation.

192

Training Program EOC0008  

NLE Websites -- All DOE Office Websites (Extended Search)

8 Emergency Categorization and Classification (CatClass) Training Part 1 (online) COURSE SYLLABUS Subject Category: Emergency Operations Schedule: NA (online) Course Length:...

193

Barrier breaching device  

DOE Patents (OSTI)

A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

Honodel, Charles A. (Tracy, CA)

1985-01-01T23:59:59.000Z

194

Barrier breaching device  

DOE Patents (OSTI)

A barrier breaching device that is designed primarily for opening holes in interior walls of buildings uses detonating fuse for explosive force. The fuse acts as the ribs or spokes of an umbrella-like device that may be opened up to form a cone. The cone is placed against the wall so that detonating fuse that rings the base of the device and which is ignited by the spoke-like fuses serves to cut a circular hole in the wall.

Honodel, C.A.

1983-06-01T23:59:59.000Z

195

Chalcopyrite Heterojunction Photovoltaic Devices  

Science Conference Proceedings (OSTI)

This indicates that a p-n junction with photovoltaic response was formed between the films and Si. The estimated open -circuit voltage VOC for these devices is...

196

Active Terahertz Metamaterial Devices  

NLE Websites -- All DOE Office Websites (Extended Search)

Active Terahertz Metamaterial Devices Active Terahertz Metamaterial Devices Active Terahertz Metamaterial Devices Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Available for thumbnail of Feynman Center (505) 665-9090 Email Active Terahertz Metamaterial Devices Metamaterial structures are taught which provide for the modulation of terahertz frequency signals. Each element within an array of metamaterial (MM) elements comprises multiple loops and at least one gap. The MM elements may comprise resonators with conductive loops and insulated gaps, or the inverse in which insulated loops are present with conductive gaps; each providing useful transmissive control properties. The metamaterial elements are fabricated on a semiconducting substrate configured with a

197

High efficiency photovoltaic device  

DOE Patents (OSTI)

An N-I-P type photovoltaic device includes a multi-layered body of N-doped semiconductor material which has an amorphous, N doped layer in contact with the amorphous body of intrinsic semiconductor material, and a microcrystalline, N doped layer overlying the amorphous, N doped material. A tandem device comprising stacked N-I-P cells may further include a second amorphous, N doped layer interposed between the microcrystalline, N doped layer and a microcrystalline P doped layer. Photovoltaic devices thus configured manifest improved performance, particularly when configured as tandem devices.

Guha, Subhendu (Troy, MI); Yang, Chi C. (Troy, MI); Xu, Xi Xiang (Findlay, OH)

1999-11-02T23:59:59.000Z

198

Iris Device Qualification Test  

Science Conference Proceedings (OSTI)

... Device Qualification Test (IDQT). July 15, 2013 - Slides from Workshop. Slides that give the detailed technical approach toward the IDQT tests are ...

2013-07-16T23:59:59.000Z

199

Medical Device Interoperability  

Science Conference Proceedings (OSTI)

... The research effort includes a gap analysis of the medical device communication standard IEEE 11073 versus use case scenarios outlined in ...

2011-03-14T23:59:59.000Z

200

Training Management Information System  

Science Conference Proceedings (OSTI)

The Training Management Information System (TMIS) is an integrated information system for all training related activities. TMIS is at the leading edge of training information systems used in the nuclear industry. The database contains all the necessary records to confirm the department's adherence to accreditation criteria and houses all test questions, student records and information needed to evaluate the training process. The key to the TMIS system is that the impact of any change (i.e., procedure change, new equipment, safety incident in the commercial nuclear industry, etc.) can be tracked throughout the training process. This ensures the best training can be performed that meets the needs of the employees. TMIS is comprised of six functional areas: Job and Task Analysis, Training Materials Design and Development, Exam Management, Student Records/Scheduling, Evaluation, and Commitment Tracking. The system consists of a VAX 6320 Cluster with IBM and MacIntosh computers tied into an ethernet with the VAX. Other peripherals are also tied into the system: Exam Generation Stations to include mark sense readers for test grading, Production PC's for Desk-Top Publishing of Training Material, and PC Image Workstations. 5 figs.

Rackley, M.P.

1989-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Hazardous Waste Management Training  

E-Print Network (OSTI)

Hazardous Waste Management Training Persons (including faculty, staff and students) working be thoroughly familiar with waste handling and emergency procedures ap- plicable to their job responsibilities before handling hazardous waste. Departments are re- quired to keep records of training for as long

Dai, Pengcheng

202

Photon Sciences Training Courses  

NLE Websites -- All DOE Office Websites (Extended Search)

Photon Sciences Training Courses Photon Sciences Training Courses Beamline Ops (BLOSA) BNL Web Courses (Help) BNL Class Schedules Business Systems & Software Contractor Orientation Cranes, Forklifts, Aerial Lifts Electrical Environmental ESH Briefings ESH Tours GERT GERT Reciprocity Human Resources IRP (Briefings) (Procedures) Job Briefings JRAs and FRAs Lasers Lead Machine Shops Medical Surveillance Nano Materials NSLS-II (Bldg 740) Photographic Dark Rm Procedures (Control Rm) Procedures (PRMs) (SOPs) Radiological Remedial (GERT) (NSLS) Roster Form (.docx) R2A2s Source Dev Lab Staff Development Study Guides Supervisory Training Training Course Dev Form User Training Work Control All Photon Sciences (PS) courses and some BNL courses (HP, OM, TQ, and GE) commonly assigned by the PS Directorate for work within PS buildings are

203

Skill Set Training Process  

NLE Websites -- All DOE Office Websites (Extended Search)

MGTP-002 Skill Set/Training Process 11_0502 Page 1 of 7 MGTP-002 Skill Set/Training Process 11_0502 Page 1 of 7 EOTA - Business Process Document Title: Skill Set/Training Process Document Number: MGTP-002 Rev. 11_0502 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: Q-001, Quality Manual Notify of Changes: EOTA Employees Referenced Documents: MGTF-002 Skill Set Model, MGTF-003 Training Review/Record, MGTF-004 New Employee Checklist, MGTF-005 Departing Employee Checklist, MGTF-006 Position Descriptions MGTP-002 Skill Set/Training Process 11_0502 Page 2 of 7 Revision History: Rev. Description of Change A Initial revision B Made minor, non-content editorial changes based on internal audit results 08_0805 Minor, non-content editorial changes based on internal audit results

204

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEASUREMENT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 Appendix B December 2008 Reaffirmed 2013 DOE HANDBOOK RADIOLOGICAL WORKER TRAINING RADIOLOGICAL CONTAMINATION CONTROL TRAINING FOR LABORATORY RESEARCH U.S. Department of Energy FSC 6910 Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Radiological Worker Training Appendix B Radiological Contamination Control for Laboratory Research DOE-HDBK-1130-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ . ii Radiological Worker Training Appendix B Radiological Contamination Control for Laboratory Research DOE-HDBK-1130-2008 Foreword This Handbook describes a recommended implementation process for core training as outlined in

205

UNIRIB: Education and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Education and Training Education and Training Education and Training The University Radioactive Ion Beam (UNIRIB) consortium provides education and training as part of its efforts to help the U.S. Department of Energy (DOE) build a highly-skilled, national, scientific workforce. UNIRIB provides a university atmosphere within the structure of a national laboratory. The on-site staff ensures dedicated support to consortium members performing research, as well as guide the training of educators and students-from undergraduates to postdoctoral researchers. UNIRIB, a division of the Oak Ridge Institute for Science and Education (ORISE), has close scientific ties with the Center of Excellence for Radioactive Ion Beam Studies for Stewardship Science, the Joint Institute for Heavy Ion Research and nuclear physicists from the Physics Division at

206

EHS Training: What's New  

NLE Websites -- All DOE Office Websites (Extended Search)

What's What's New What's New in EHS Training This is alist of projects that EHS Training is currently working on are has recently completed. For more information, contact James Basore at jdbasore@lbl.gov Updated: 8/15/2013 Instructional Video Projects Lockot/Tagout cord-n-plug Video is for new LOTO classroom training (EHS 0358) used as an activity Deveoped for Mark Scott Target date: August 2013 Safely moving pressurized gas cyclinders and cryogen dewars Short video is designed to raise awarenesss for how to safely move a pressurized gas cyclinder and cryogen dewar Target date: September 2013 New and Revised Training Courses New version of EHS0010 Overview of Environment, Health and Safety at LBNL Newly revised training addresses changes in organizational structure, and rebalances content to include traffic/pedestrian safety and

207

Clean Cities: Electric Vehicle Infrastructure Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Vehicle Infrastructure Training Program The Electric Vehicle Infrastructure Training Program (EVITP) provides training and certification for people installing electric...

208

Official Use Only Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Official Use Only Training Official Use Only Training Enforcement Guidance Oversight Reporting Classification Classification Training Institute Official Use Only Information...

209

SANS Training Voucher Program Registration Procedures | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

SANS Training Voucher Program Registration Procedures SANS Training Voucher Program Registration Procedures SANS Training Voucher Program Registration Procedures For Federal...

210

Mobile Device Management Android Device Enrollment  

E-Print Network (OSTI)

Play Store. b. Search for Zenprise for Employees. c. Tap Install. #12;d. Tap Accept and download. 4 your device. b. Tap Enroll Android. c. Enter your LSUHSC email address. #12;d. Enter LSUHSC password and click Enroll. i. StrongId should be blank. e. Accept the Terms and Conditions. 5. Installing Touchdown a

211

PIA - Plateau Training System | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Plateau Training System PIA - Plateau Training System PIA - Plateau Training System PIA - Plateau Training System More Documents & Publications Integrated Safety Management...

212

Training Work Group Charter | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Work Group Charter Training Work Group Charter The Training Work Group fosters improvements in the quality, efficacy, and delivery of DOE safety training, and realizes...

213

Methods of Training in the Workplace  

E-Print Network (OSTI)

computer or software training programs; and/or 4) learned tocomputer or software training programs Self-trained usingcomputer or software training programs Both instructor-led

Danziger, Jim; Dunkle, Debbie

2005-01-01T23:59:59.000Z

214

Annual Training Plan Template | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Plan Template Annual Training Plan Template The Annual Training Plan Template is used by an organization's training POC to draft their organization's annual training plan. The...

215

IGCA Training 2012 | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training 2012 IGCA Training 2012 IGCATraining2012.pptx More Documents & Publications Microsoft PowerPoint - IGCA Training 2011-OPAM Microsoft PowerPoint - IGCA Training 2010 v3...

216

Training and Workforce Development Forum Newsletter | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training and Workforce Development Forum Newsletter Training and Workforce Development Forum Newsletter Training and Workforce Development Forum Newsletter Training and Workforce...

217

TEC Working Group Topic Groups Archives Training - Medical Training...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting Summaries TEC Working Group Topic Groups Archives Training - Medical Training Meeting Summaries Meeting Summaries Philadelphia TEC Meeting, Topic Group Summary - July 1999...

218

Grey man devices  

E-Print Network (OSTI)

The Vision Slaved to Walking Device i s one in a series of devices that are a result of the experimental ambulation series. The ability to see only when one's feet are moving allows for a distorted perspective of ones own ...

Sethi, Sanjit (Sanjit Singh), 1971-

2002-01-01T23:59:59.000Z

219

Chronology of Computing Devices  

Science Conference Proceedings (OSTI)

A chronology of computing devices is given. It begins with the abacus and counting tables, and traces the development through desk calculators, analog computers, and finally stored program automatic digital computers. Significant dates relative to the ... Keywords: Calculating machines, chronology, computers, computing devices, history.

H. D. Huskey; V. R. Huskey

1976-12-01T23:59:59.000Z

220

Verifiably secure devices  

Science Conference Proceedings (OSTI)

We put forward the notion of a verifiably secure device, in essence a stronger notion of secure computation, and achieve it in the ballot-box model. Verifiably secure devices 1. Provide a perfect solution to the problem of achieving correlated equilibrium, ...

Sergei Izmalkov; Matt Lepinski; Silvio Micali

2008-03-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Device for removing blackheads  

DOE Patents (OSTI)

A device for removing blackheads from pores in the skin having a elongated handle with a spoon shaped portion mounted on one end thereof, the spoon having multiple small holes piercing therethrough. Also covered is method for using the device to remove blackheads.

Berkovich, Tamara (116 N. Wetherly Dr., Suite 115, Los Angeles, CA)

1995-03-07T23:59:59.000Z

222

Self-actuated device  

DOE Patents (OSTI)

A self-actuated device, of particular use as a valve or an orifice for nuclear reactor fuel and blanket assemblies, in which a gas produced by a neutron induced nuclear reaction gradually accumulates as a function of neutron fluence. The gas pressure increase occasioned by such accumulation of gas is used to actuate the device.

Hecht, Samuel L. (Richland, WA)

1984-01-01T23:59:59.000Z

223

NERSC Workshops and Training Events  

NLE Websites -- All DOE Office Websites (Extended Search)

BerkeleyGW2013 Edison Performance New User Training HPC Using GPUs Getting Started at NERSC Training -- Edison Getting Started at NERSC NERSC Training at SC12 Effective Use of...

224

Training .:. Lawrence Berkeley National Laboratory  

NLE Websites -- All DOE Office Websites (Extended Search)

Home Berkeley Lab Home OCFO Home Training Home OCFO Training OCFO Training Home OCFO Home Berkeley Lab Home U.S. DOE Home Accounts Payable OCFO Home Berkeley Lab Home US Department...

225

Engineering Technical Training Module (ETTM) - Level Measurement v1.0  

Science Conference Proceedings (OSTI)

Engineering Technical Training Module (ETTM) Level Measurement, Version 1.0 is a computer-based training module that allows users to access training when desired and review it at their own pace.Accurate fluid level measurements are critical to the safe operation and efficient energy production within a power plant. Knowledge of several fluid properties, such as pressure, gravity, and density effects, are reviewed before introducing the methods and devices used to measure fluid ...

2013-10-08T23:59:59.000Z

226

Planar electrochemical device assembly  

DOE Patents (OSTI)

A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

Jacobson; Craig P. (Lafayette, CA), Visco; Steven J. (Berkeley, CA), De Jonghe; Lutgard C. (Lafayette, CA)

2010-11-09T23:59:59.000Z

227

Planar electrochemical device assembly  

DOE Patents (OSTI)

A pre-fabricated electrochemical device having a dense electrolyte disposed between an anode and a cathode preferably deposited as thin films is bonded to a porous electrically conductive support. A second porous electrically conductive support may be bonded to a counter electrode of the electrochemical device. Multiple electrochemical devices may be bonded in parallel to a single porous support, such as a perforated sheet to provide a planar array. Planar arrays may be arranged in a stacked interconnected array. A method of making a supported electrochemical device is disclosed wherein the method includes a step of bonding a pre-fabricated electrochemical device layer to an existing porous metal or porous metal alloy layer.

Jacobson, Craig P. (Lafayette, CA); Visco, Steven J. (Berkeley, CA); De Jonghe, Lutgard C. (Lafayette, CA)

2007-06-19T23:59:59.000Z

228

Fluidic nanotubes and devices  

DOE Patents (OSTI)

Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

Yang, Peidong (El Cerrito, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2010-01-10T23:59:59.000Z

229

Fluidic nanotubes and devices  

DOE Patents (OSTI)

Fluidic nanotube devices are described in which a hydrophilic, non-carbon nanotube, has its ends fluidly coupled to reservoirs. Source and drain contacts are connected to opposing ends of the nanotube, or within each reservoir near the opening of the nanotube. The passage of molecular species can be sensed by measuring current flow (source-drain, ionic, or combination). The tube interior can be functionalized by joining binding molecules so that different molecular species can be sensed by detecting current changes. The nanotube may be a semiconductor, wherein a tubular transistor is formed. A gate electrode can be attached between source and drain to control current flow and ionic flow. By way of example an electrophoretic array embodiment is described, integrating MEMs switches. A variety of applications are described, such as: nanopores, nanocapillary devices, nanoelectrophoretic, DNA sequence detectors, immunosensors, thermoelectric devices, photonic devices, nanoscale fluidic bioseparators, imaging devices, and so forth.

Yang, Peidong (Berkeley, CA); He, Rongrui (El Cerrito, CA); Goldberger, Joshua (Berkeley, CA); Fan, Rong (El Cerrito, CA); Wu, Yiying (Albany, CA); Li, Deyu (Albany, CA); Majumdar, Arun (Orinda, CA)

2008-04-08T23:59:59.000Z

230

Device for cutting protrusions  

DOE Patents (OSTI)

An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

Bzorgi, Fariborz M. (Knoxville, TN)

2011-07-05T23:59:59.000Z

231

SWP Carbon Sequestration Training Center  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Center Presentation, October 2010 SWP Carbon Sequestration Training Center Principal Investigators: New Mexico Tech, Andrew Campbell and Peter Mozley University of Utah,...

232

AVESTAR - Training Calender and Costs  

NLE Websites -- All DOE Office Websites (Extended Search)

Meet Our Partners Simulators IGCC Gasification Combined Cycle NGCC SCOT Oxy-coal Shale Gas 3D Virtual IGCC Training How to Register for Training IGCC Gasification Combined...

233

Training of nuclear facility personnel  

Science Conference Proceedings (OSTI)

Separate abstracts are included for each of the papers presented concerning certification and standards; operations training; the human element; and non-licensed training.

Not Available

1981-04-01T23:59:59.000Z

234

PMCDP Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PMCDP Training PMCDP Training Aviation Management Green Leases Executive Secretariat Energy Reduction at HQ Real Estate Approvals Documents and Publications Facilities and...

235

CHRIS Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CHRIS Training CHRIS Training Benefits DOE Workers' Compensation Program Insurance MilitaryReservist Retirement Telework Thrift Savings Plan (TSP) Wellness Programs Employee &...

236

ORISE: Training and Qualification Programs  

NLE Websites -- All DOE Office Websites (Extended Search)

Training and Qualification Programs As a core part of providing effective communication and training to protect the safety of workers, the Oak Ridge Institute for Science and...

237

Training Advisor | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Advisor Training Advisor Benefits DOE Workers' Compensation Program Insurance MilitaryReservist Retirement Telework Thrift Savings Plan (TSP) Wellness Programs Employee &...

238

PLATO administers operator training  

SciTech Connect

Baltimore Gas and Electric Co. is committed to an in-depth training program for substation operators. For the past two years, one important part of the training program has been a computer-based educational system with a CRT touch-response graphic display that is interactive with the trainee. This system, known as PLATO, reproduces a training situation so realistic that the operator becomes completely involved with the lesson. When used for pretraining prior to substation operating experience, it provides a hands-on insight into operating practices without jeopardizing personnel or equipment, or degrading customer service.

Buehner, R.E.

1979-02-15T23:59:59.000Z

239

JGI Compute User Training  

NLE Websites -- All DOE Office Websites (Extended Search)

JGI Compute JGI Compute User Training Series JGI Compute User Training Series homeh1 Overview NERSC and IT staff will host a series training sessions and open office hours to introduce new services and review best practices for using the Crius cluster. All sessions are hands on, so please bring your laptop. If you are or were a user of any of the following systems, Crius, Rhea, Kronos, Theia, Oceanus or Phoebe, it will be beneficial for you to attend these training sessions. And if you plan to use JGI compute resources in the future, we also encourage you to attend. It will also be an opportunity for JGI compute users to ask questions and give NERSC and IT staff feedback on your requirements. Session 3: February 24th, 2012 1:30-5pm rm 100-101 Agenda 1:30-1:45 - Intro and presentation of the transition schedule we talked

240

New Switching Operator Training  

Science Conference Proceedings (OSTI)

This Technical Update report summarizes work done on a new project, launched in 2006, that is focused on the development of training materials for apprentice and new operators. The project is part of EPRI's Switching Safety and Reliability research.

2006-12-11T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Computerized training management system  

DOE Patents (OSTI)

A Computerized Training Management System (CTMS) is disclosed for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base{trademark}, an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches. 18 figs.

Rice, H.B.; McNair, R.C.; White, K.; Maugeri, T.

1998-08-04T23:59:59.000Z

242

Computerized training management system  

DOE Patents (OSTI)

A Computerized Training Management System (CTMS) for providing a procedurally defined process that is employed to develop accreditable performance based training programs for job classifications that are sensitive to documented regulations and technical information. CTMS is a database that links information needed to maintain a five-phase approach to training-analysis, design, development, implementation, and evaluation independent of training program design. CTMS is designed using R-Base.RTM., an-SQL compliant software platform. Information is logically entered and linked in CTMS. Each task is linked directly to a performance objective, which, in turn, is linked directly to a learning objective; then, each enabling objective is linked to its respective test items. In addition, tasks, performance objectives, enabling objectives, and test items are linked to their associated reference documents. CTMS keeps all information up to date since it automatically sorts, files and links all data; CTMS includes key word and reference document searches.

Rice, Harold B. (Franklin Furnace, OH); McNair, Robert C. (East Setauket, NY); White, Kenneth (Shirley, NY); Maugeri, Terry (Wading River, NY)

1998-08-04T23:59:59.000Z

243

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 December 2008 Change Notice 1 June 2009 DOE HANDBOOK Radiological Worker Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved...

244

Training at LBNL  

NLE Websites -- All DOE Office Websites (Extended Search)

Following are web links and people you may contact for information on training: Lab Policy: RPM 2.04, Education and Employee-Development Policies, discusses the types, sources and...

245

Worker Training Program (Nebraska)  

Energy.gov (U.S. Department of Energy (DOE))

The Worker Training Program is a business incentive program to support the retraining and upgrading of Nebraskas current workforce. The amount of grant funding available quarterly is distributed...

246

Work in progress: Educational program approach of device fabrication and its analysis for engineering experiments  

Science Conference Proceedings (OSTI)

In this paper, we discuss an educational program approach to device fabrication and analysis for an advanced course curriculum for technical training at the Okinawa National College of Technology (ONCT). Letting students have the opportunity to learn ... Keywords: Fabrication,Educational institutions,MOSFET circuits,Transversal filters,Surface acoustic waves,Semiconductor device measurement,SAW Transversal Filter,Enginireeing Experiment,Device Fabrication Process,Decice Analysis,MOSFET

Katsuya Higa, Chinami Kaneshiro

2012-10-01T23:59:59.000Z

247

SLUG HANDLING DEVICES  

DOE Patents (OSTI)

A device is described for handling fuel elements of a neutronic reactor. The device consists of two concentric telescoped contalners that may fit about the fuel element. A number of ratchet members, equally spaced about the entrance to the containers, are pivoted on the inner container and spring biased to the outer container so thnt they are forced to hear against and hold the fuel element, the weight of which tends to force the ratchets tighter against the fuel element. The ratchets are released from their hold by raising the inner container relative to the outer memeber. This device reduces the radiation hazard to the personnel handling the fuel elements.

Gentry, J.R.

1958-09-16T23:59:59.000Z

248

INTERNAL CUTTING DEVICE  

DOE Patents (OSTI)

A device is described for removing material from the interior of a hollow workpiece so as to form a true spherical internal surface in a workpiece, or to cut radial slots of an adjustable constant depth in an already established spherical internal surface. This is accomplished by a spring loaded cutting tool adapted to move axially wherein the entire force urging the tool against the workpiece is derived from the spring. Further features of importance involve the provision of a seal between the workpiece and the cutting device and a suction device for carrying away particles of removed material.

Russell, W.H. Jr.

1959-06-30T23:59:59.000Z

249

Rain sampling device  

DOE Patents (OSTI)

The present invention constitutes a rain sampling device adapted for independent operation at locations remote from the user which allows rainfall to be sampled in accordance with any schedule desired by the user. The rain sampling device includes a mechanism for directing wet precipitation into a chamber, a chamber for temporarily holding the precipitation during the process of collection, a valve mechanism for controllably releasing samples of the precipitation from the chamber, a means for distributing the samples released from the holding chamber into vessels adapted for permanently retaining these samples, and an electrical mechanism for regulating the operation of the device. 11 figures.

Nelson, D.A.; Tomich, S.D.; Glover, D.W.; Allen, E.V.; Hales, J.M.; Dana, M.T.

1991-05-14T23:59:59.000Z

250

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

7of 9 7of 9 Radiological Control Technician Training Practical Training Phase II Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii Table of Contents Page Introduction.............................................................................. ......1 Development of Job Performance Measures (JPMs)............................ .....1 Conduct Job Performance Evaluation...................................................3 Qualification Area: Radiological Instrumentation.......................................5 Task 2-1.................. ..................................................................... 5 Objective.............................................................................. 5

251

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiological Control Technician Training Facility Practical Training Attachment Phase IV Coordinated and Conducted for the Office of Health, Safety and Security U.S. Department of Energy DOE-HDBK-1122-2009 ii This page intentionally left blank DOE-HDBK-1122-2009 iii Table of Contents Page Introduction................................................................................................................................1 Facility Job Performance Measures ........................................................................................2 Final Verification Signatures ....................................................................................................3 DOE-HDBK-1122-2009 iv

252

Slit injection device  

DOE Patents (OSTI)

A laser cavity electron beam injection device provided with a single elongated slit window for passing a suitably shaped electron beam and means for varying the current density of the injected electron beam.

Alger, Terry W. (Livermore, CA); Schlitt, Leland G. (Livermore, CA); Bradley, Laird P. (Livermore, CA)

1976-06-15T23:59:59.000Z

253

Multimaterial rectifying device fibers  

E-Print Network (OSTI)

Electronic and optoelectronic device processing is commonly thought to be incompatible with much simpler thermal drawing techniques used in optical fiber production. The incorporation of metals, polymer insulators, and ...

Orf, Nicholas D

2009-01-01T23:59:59.000Z

254

DEVICE RESEARCH CONFERENCE  

Science Conference Proceedings (OSTI)

Jun 23, 2004 ... Inverter in Single-Wall Carbon Nanotubes. D. Tsuya1,2, M. Suzuki 1,3, Y. Aoyagi2, K. Ishibashi1,3,. 1Advanced Device Laboratory, The Institute.

255

Raney nickel catalytic device  

DOE Patents (OSTI)

A catalytic device for use in a conventional coal gasification process which includes a tubular substrate having secured to its inside surface by expansion a catalytic material. The catalytic device is made by inserting a tubular catalytic element, such as a tubular element of a nickel-aluminum alloy, into a tubular substrate and heat-treating the resulting composite to cause the tubular catalytic element to irreversibly expand against the inside surface of the substrate.

O' Hare, Stephen A. (Vienna, VA)

1978-01-01T23:59:59.000Z

256

Contamination control device  

DOE Patents (OSTI)

A contamination control device for use in a gas-insulated transmission bus consisting of a cylindrical center conductor coaxially mounted within a grounded cylindrical enclosure. The contamination control device is electrically connected to the interior surface of the grounded outer shell and positioned along an axial line at the lowest vertical position thereon. The contamination control device comprises an elongated metallic member having a generally curved cross-section in a first plane perpendicular to the axis of the bus and having an arcuate cross-section in a second plane lying along the axis of the bus. Each opposed end of the metallic member and its opposing sides are tapered to form a pair of generally converging and downward sloping surfaces to trap randomly moving conductive particles in the relatively field-free region between the metallic member and the interior surface of the grounded outer shell. The device may have projecting legs to enable the device to be spot welded to the interior of the grounded housing. The control device provides a high capture probability and prevents subsequent release of the charged particles after the capture thereof.

Clark, Robert M. (Ligonier, PA); Cronin, John C. (Greensburg, PA)

1977-01-01T23:59:59.000Z

257

Electronic security device  

DOE Patents (OSTI)

The present invention relates to a security device having a control box containing an electronic system and a communications loop over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system and a detection module capable of registering changes in the voltage and phase of the signal transmitted over the loop. 11 figs.

Eschbach, E.A.; LeBlanc, E.J.; Griffin, J.W.

1992-03-17T23:59:59.000Z

258

Electronic security device  

DOE Patents (OSTI)

The present invention relates to a security device having a control box (12) containing an electronic system (50) and a communications loop (14) over which the system transmits a signal. The device is constructed so that the communications loop can extend from the control box across the boundary of a portal such as a door into a sealed enclosure into which access is restricted whereby the loop must be damaged or moved in order for an entry to be made into the enclosure. The device is adapted for detecting unauthorized entries into such enclosures such as rooms or containers and for recording the time at which such entries occur for later reference. Additionally, the device detects attempts to tamper or interfere with the operation of the device itself and records the time at which such events take place. In the preferred embodiment, the security device includes a microprocessor-based electronic system (50) and a detection module (72) capable of registering changes in the voltage and phase of the signal transmitted over the loop.

Eschbach, Eugene A. (Richland, WA); LeBlanc, Edward J. (Kennewick, WA); Griffin, Jeffrey W. (Kennewick, WA)

1992-01-01T23:59:59.000Z

259

Classification Training Institute Catalog | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Classification » Classification Training Institute » Services » Classification » Classification Training Institute » Classification Training Institute Catalog Classification Training Institute Catalog Classification Training Institute (CTI) Catalog Training & Reference Materials Online Classified or Controlled Information Mini-Lessons Classified Information Training Unclassified Controlled Nuclear Information Training Official Use Only Training OpenNet Training Training For Other Agency Personnel Classification Training Institute Catalog Enforcement Guidance Oversight Reporting Security Classification Classification Training Institute Official Use Only Information Unclassified Controlled Nuclear Information (UCNI) Statutes, Regulations, & Directives Nuclear Safety Assistance Training Outreach & Collaboration

260

Rediness Review Team Member Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

MEMBER MEMBER TRAINING Idaho National Engineering Laboratory Michael Hillman DOE HQ - HSS Idaho National Engineering Laboratory Dan M. Stover, PE Technical And Professional Services, Inc. 47 James Habersham Blvd Beaufort, SC 29906 Official DOE Team Member Readiness Review Training November 8-9, 2010 Module 1 Module 1 READINESS REVIEW TEAM MEMBER TRAINING Introduction & Course Conduct Readiness Review Readiness Review Official DOE Team Member Readiness Review Training November 2010 TRAINING READINESS REVIEW TEAM MEMBER TRAINING Purpose of this Course Provide Prospective Readiness Review Team members h with: * An understanding of the background behind the Readiness Review Process; e e ocess; * Training in the mechanics of performance and reporting of

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Training Resources | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Resources Training Resources Training Resources Training Resources Course Catalogs CHRIS Catalog [select CHRIS Training] EOTA Catalog Graduate School USA Leadership Development Program Catalog NTC Catalog OLC Catalog - for Feds [logon in ESS] OLC Catalog - for Contractors Professional Skills Catalog Course Schedules CHRIS Schedule [select CHRIS Training] DOE Mandatory Training Graduate School USA NTC Schedule Professional Skills Schedule Course Registration CHRIS Registration [logon in ESS] EOTA Registration NTC Registration OLC Registration - for Feds [logon in ESS] OLC Registration - for Contractors Search Tools National Library of Energy (Beta) DVU Home Page College of Environmental Management logo College of Emergency Operations College of Health Safety & Security College of Learning & Workforce Development

262

Collaborative Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Collaborative Training Collaborative Training Overview HSS Collaborative Training Work Group: In a teamed effort, the U.S. Department of Energy's (DOE) Office of Health, Safety and Security (HSS) National Training Center (NTC), the National Institute of Environmental Health Sciences (NIEHS), Volpentest HAMMER Training and Education Center (HAMMER), Energy Facility Contractors Group (EFCOG), and labor unions work to identify and address worker health, safety and security training improvement needs across the DOE Complex. The Work Group has served to initiate dialogue across the Complex to foster discussion and ideas for implementation of integrated safety and health training that could minimize redundancy and enhance the quality, efficiency, and effectiveness of DOE

263

Training News | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training News Training News Training News December 5, 2013 Basic Instructor Training The Emergency Operations Training Academy, NA 40.2, Readiness and Training, Albuquerque, NM is pleased to announce site certification by the National Training Center for conduct of the Basic Instructor Training class November 25, 2013 What is Continual Learning? Continual Learning is a change initiative which is used to help develop and grow a learning culture within DOE. Employee development in any organization and at any level is never ending. October 23, 2013 New and Improved Level 1 Training Evaluation Report The Level 1 Evaluation Summary is a CHRIS Training System function used to generate a report that summarizes the information obtained from CHRIS course evaluations completed by students. The Level 1 Evaluation Summary

264

EHS 277  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment, Health, & Safety Training Program EHS 277 - Confined Space Entry Supervisor Course Syllabus Subject...

265

Effective Safety Training Programs for Aluminum Cast Shops  

Science Conference Proceedings (OSTI)

Instruction by technical experts, managers, supervisors, and safety staff ... and others; Observing that safety-related maintenance items receive high priority. ... patterns, curl-reduction technology, lubricant system, spouts pins, equipment set- up,...

266

Electrical apparatus lockout device  

DOE Patents (OSTI)

A simple lockout device for electrical equipment equipped with recessed power blades is described. The device comprises a face-plate (12) having a threaded member (14) attached thereto and apertures suitable for accommodating the power blades of a piece of electrical equipment, an elastomeric nose (16) abutting the face-plate having a hole for passage of the threaded member therethrough and power blade apertures in registration with those of the face-plate, a block (20) having a recess (34) in its forward face for receiving at least a portion of the hose, a hole therein for receiving the threaded member and an integral extension (26) extending from its rear face. A thumb screw (22) suitable for turning with the hands and having internal threads suitable for engaging the threaded member attached to the face-plate is inserted into a passage in the integral extension to engage the threaded member in such a fashion that when the device is inserted over the recessed power blades of a piece of electrical equipment and the thumb screw (22) tightened, the elastomeric nose (16) is compressed between the face-plate (12) and the block (20) forcing it to expand laterally thereby securing the device in the recess and precluding the accidental or intentional energization of the piece of equipment by attachment of a power cord to the recessed power blades. Means are provided in the interval extension and the thumb screw for the attachment of a locking device (46) which will satisfy OSHA standards.

Gonzales, Rick (Chesapeake, VA)

1999-01-01T23:59:59.000Z

267

Spectral tailoring device  

DOE Patents (OSTI)

A spectral tailoring device for altering the neutron energy spectra and flux of neutrons in a fast reactor thereby selectively to enhance or inhibit the transmutation rate of a target metrical to form a product isotope. Neutron moderators, neutron filters, neutron absorbers and neutron reflectors may be used as spectral tailoring devices. Depending on the intended use for the device, a member from each of these four classes of materials could be used singularly, or in combination, to provide a preferred neutron energy spectra and flux of the neutrons in the region of the target material. In one embodiment of the invention, an assembly is provided for enhancing the production of isotopes, such as cobalt 60 and gadolinium 153. In another embodiment of the invention, a spectral tailoring device is disposed adjacent a target material which comprises long lived or volatile fission products and the device is used to shift the neutron energy spectra and flux of neutrons in the region of the fission products to preferentially transmute them to produce a less volatile fission product inventory. 6 figs.

Brager, H.R.; Schenter, R.E.; Carter, L.L.; Karnesky, R.A.

1987-08-05T23:59:59.000Z

268

General Employee Radiological Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ DOE-HDBK-1131-2007 iii Foreword This Handbook describes an implementation process for core training as recommended in chapter 14, Radiation Safety Training, of Implementation Guide G44.1B, Radiation Protection Programs Guide, and as outlined in the DOE Radiological Control Standard [RCS - DOE-STD-1098-99, Ch. 1]. The Handbook is meant to assist those individuals

269

TEXT Pro Force Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Basic Protective Basic Protective Force Training Program DOE/IG-0641 March 2004 * None of the 10 sites included instruction in rappelling even though it was part of the special response team core curriculum and continued to be offered by the Nonprolif- eration and National Security Institute; * Only one site conducted basic training on use of a shotgun, despite the fact that a num- ber of sites used the weapon for breaching exercises and other purposes; and, * Seven of the sites modified prescribed training techniques by reducing the intensity or delivery method for skills that some security experts characterized as critical, such as handcuffing, hand-to- hand combat, and vehicle assaults. We found that the Department's facilities were not required to report departures from the core

270

DEPARTMENT OF ENERGY Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Privacy Awareness Training Privacy Awareness Training The Privacy Act & Safeguarding Personally Identifiable Information (PII) 2 Purpose This training is designed to address the importance of privacy, and to ensure that DOE employees are aware of the vital role they play in safeguarding privacy and protecting Personally Identifiable Information (PII). 3 Privacy & PII is a Special Area of Interest at DOE Recent breaches of PII across the government, including some at the Department of Energy, were well publicized, costly, and prompted the Administration and Congress to take action to improve the protection of PII. 4 Privacy Act ► The Privacy Act of 1974 (5 U.S.C. 552a) establishes controls over what personal information is collected and maintained by the Executive Branch and how the

271

TEPP Training Brochure  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

CECBEMS Accreditation CECBEMS Accreditation The MERRTT program has been approved by the Continuing Education Coordinating Board of Emergency Medical Services for Continuing Education Hours (CEH). CEHs are awarded for each module completed and for the Practical Exercises. MERRTT Instructor Patch The TEPP instructor patches are designed for personnel who are qualified as MERRTT instructors. To receive a patch, instructors must attend a MERRTT Train- the-Trainer. When they conduct their first MERRTT classroom session, the instructor can request a patch from the regional TEPP Coordinator. Technical Assistance TEPP provides technical assistance to State and Tribal Governments in obtaining a greater understanding of radiological risks, identifying planning deficiencies, updating plans, training first

272

Federal Energy Management Program: Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

EERE » Federal Energy Management Program » Services EERE » Federal Energy Management Program » Services Printable Version Share this resource Training Calendar eTraining Courses First Thursday Seminars Training FEMP trains Federal agency managers about the latest energy requirements, best practices, and technologies through eTraining Courses, First Thursday Seminars, and webinars. Customize your display by choosing a category and format below, or click a link in the navigation at left. 1. Select Training Category (What's this?) All categories Design, operations, and maintenance Energy efficient products Energy management Financing Fleet Greenhouse gases Institutional change Laws, regulation, and guidance Renewable energy Water efficiency 2. Select Training Format All formats Live training - register to attend On demand training - watch any time

273

The development of radioactive sample surrogates for training and exercises  

Science Conference Proceedings (OSTI)

The development of radioactive sample surrogates for training and exercises Source term information is required for to reconstruct a device used in a dispersed radiological dispersal device. Simulating a radioactive environment to train and exercise sampling and sample characterization methods with suitable sample materials is a continued challenge. The Idaho National Laboratory has developed and permitted a Radioactive Response Training Range (RRTR), an 800 acre test range that is approved for open air dispersal of activated KBr, for training first responders in the entry and exit from radioactively contaminated areas, and testing protocols for environmental sampling and field characterization. Members from the Department of Defense, Law Enforcement, and the Department of Energy participated in the first contamination exercise that was conducted at the RRTR in the July 2011. The range was contaminated using a short lived radioactive Br-82 isotope (activated KBr). Soil samples contaminated with KBr (dispersed as a solution) and glass particles containing activated potassium bromide that emulated dispersed radioactive materials (such as ceramic-based sealed source materials) were collected to assess environmental sampling and characterization techniques. This presentation summarizes the performance of a radioactive materials surrogate for use as a training aide for nuclear forensics.

Martha Finck; Bevin Brush; Dick Jansen; David Chamberlain; Don Dry; George Brooks; Margaret Goldberg

2012-03-01T23:59:59.000Z

274

Pendulum detector testing device  

DOE Patents (OSTI)

A detector testing device is described which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: (1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, (2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and (3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements. 5 figs.

Gonsalves, J.M.

1997-09-30T23:59:59.000Z

275

REACTOR CONTROL DEVICE  

DOE Patents (OSTI)

A wholly mechanical compact control device is designed for automatically rendering the core of a fission reactor subcritical in response to core temperatures in excess of the design operating temperature limit. The control device comprises an expansible bellows interposed between the base of a channel in a reactor core and the inner end of a fuel cylinder therein which is normally resiliently urged inwardly. The bellows contains a working fluid which undergoes a liquid to vapor phase change at a temperature substantially equal to the design temperature limit. Hence, the bellows abruptiy expands at this limiting temperature to force the fuel cylinder outward and render the core subcritical. The control device is particularly applicable to aircraft propulsion reactor service. (AEC)

Graham, R.H.

1962-09-01T23:59:59.000Z

276

Electrochromic optical switching device  

DOE Patents (OSTI)

An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source. 3 figs.

Lampert, C.M.; Visco, S.J.

1992-08-25T23:59:59.000Z

277

Pendulum detector testing device  

DOE Patents (OSTI)

A detector testing device which provides consistent, cost-effective, repeatable results. The testing device is primarily constructed of PVC plastic and other non-metallic materials. Sensitivity of a walk-through detector system can be checked by: 1) providing a standard test object simulating the mass, size and material content of a weapon or other contraband, 2) suspending the test object in successive positions, such as head, waist and ankle levels, simulating where the contraband might be concealed on a person walking through the detector system; and 3) swinging the suspended object through each of the positions, while operating the detector system and observing its response. The test object is retained in a holder in which the orientation of the test device or target can be readily changed, to properly complete the testing requirements.

Gonsalves, John M. (Modesto, CA)

1997-01-01T23:59:59.000Z

278

Electrochromic optical switching device  

DOE Patents (OSTI)

An electrochromic cell is disclosed which comprises an electrochromic layer, a polymerizable organo-sulfur layer which comprises the counter electrode of the structure, and an ionically conductive electronically insulating material which comprises the separator between the electrodes. In a preferred embodiment, both the separator and the organo-sulfur electrode (in both its charged and uncharged states) are transparent either to visible light or to the entire solar spectrum. An electrochromic device is disclosed which comprises such electrodes and separator encased in glass plates on the inner surface of each of which is formed a transparent electrically conductive film in respective electrical contact with the electrodes which facilitates formation of an external electrical connection or contact to the electrodes of the device to permit electrical connection of the device to an external potential source.

Lampert, Carl M. (El Sobrante, CA); Visco, Steven J. (Berkeley, CA)

1992-01-01T23:59:59.000Z

279

REMOTE CONTROLLED SWITCHING DEVICE  

DOE Patents (OSTI)

An electrical switching device which can be remotely controlled and in which one or more switches may be accurately operated at predetermined times or with predetermined intervening time intervals is described. The switching device consists essentially of a deck, a post projecting from the deck at right angles thereto, cam means mounted for rotation around said posts and a switch connected to said deck and actuated by said cam means. Means is provided for rotating the cam means at a constant speed and the switching apparatus is enclosed in a sealed container with external adjusting means and electrical connection elements.

Hobbs, J.C.

1959-02-01T23:59:59.000Z

280

EXPERIMENTAL ANIMAL WATERING DEVICE  

SciTech Connect

A device for watering experimental animals confined in a battery of individual plastic enclosures is described. It consists of a rectangular plastic enclosure having a plurality of fluid-tight compartments, each with a drinking hole near the bottom and a filling hole on the top. The enclosure is immersed in water until filled, its drinking holes sealed with a strip of tape, and it is then placed in the battery. The tape sealing prevents the flow of water from the device, but permits animals to drink by licking the drinking holes. (AEC)

Finkel, M.P.

1964-04-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

Precision alignment device  

DOE Patents (OSTI)

Apparatus for providing automatic alignment of beam devices having an associated structure for directing, collimating, focusing, reflecting, or otherwise modifying the main beam. A reference laser is attached to the structure enclosing the main beam producing apparatus and produces a reference beam substantially parallel to the main beam. Detector modules containing optical switching devices and optical detectors are positioned in the path of the reference beam and are effective to produce an electrical output indicative of the alignment of the main beam. This electrical output drives servomotor operated adjustment screws to adjust the position of elements of the structure associated with the main beam to maintain alignment of the main beam. 5 figs.

Jones, N.E.

1988-03-10T23:59:59.000Z

282

Phononic crystal devices  

DOE Patents (OSTI)

Phononic crystals that have the ability to modify and control the thermal black body phonon distribution and the phonon component of heat transport in a solid. In particular, the thermal conductivity and heat capacity can be modified by altering the phonon density of states in a phononic crystal. The present invention is directed to phononic crystal devices and materials such as radio frequency (RF) tags powered from ambient heat, dielectrics with extremely low thermal conductivity, thermoelectric materials with a higher ratio of electrical-to-thermal conductivity, materials with phononically engineered heat capacity, phononic crystal waveguides that enable accelerated cooling, and a variety of low temperature application devices.

El-Kady, Ihab F. (Albuquerque, NM); Olsson, Roy H. (Albuquerque, NM)

2012-01-10T23:59:59.000Z

283

Rediness Review Team Leader Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

LEADER LEADER TRAINING Idaho National Engineering Laboratory Idaho National Engineering Laboratory Michael Hillman DOE-HSS HQ Dan M. Stover, PE Technical And Professional Services, Inc. November 10 2010 Official DOE Team Leader Readiness Review Training November 10, 2010 READINESS REVIEW TEAM LEADER TRAINING Introduction & Course Conduct Readiness Review Official DOE Team Leader Readiness Review Training TRAINING READINESS REVIEW TEAM LEADER TRAINING Purpose of this Course Provide prospective Readiness Review Team Leaders with: -An understanding of the Team Leader Roles and Responsibilities -Methods to control team dynamics -Methods to manage interaction with the assessed organization Methods to manage interaction with the assessed organization

284

Environment/Health/Safety (EHS) Training: Monthly Training Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

Register for Classroom Training Register for Classroom Training Register yourself Click here to register for EHSS classroom training. After you login to the HRIS Self-Service website, you will be able to search for a course and enroll. After you successfully enroll, you will receive confirmation via email. OR Register others To register others please email ehs_training@lbl.gov with the name of the course, the date you are requesting enrollment and the name and employee id number of the individual you would like to register. If you have any questions regarding enrolling others please contact the EHSS Training Office at x2228 or 510-495-2228. How to Get Help: If you have questions about enrolling in classroom training, contact the EHSS Training Program Assistant at (510) 495-2228. Email: ehs_training.lbl.gov

285

Environment/Health/Safety (EHS) Training: Monthly Training Schedules  

NLE Websites -- All DOE Office Websites (Extended Search)

EHS Training Calendar This Google Calendar lists all of the EHS Training sessions that have been scheduled. Please login using your LDAP to access the calendar. Click on the course...

286

PARS II Training Schedule  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

2 4 5 6 7 8 WEEK 3 11 12 13 14 15 WEEK 4 18 19 20 21 22 WEEK 5 25 26 27 28 PARS II Training Schedule FEBRUARY 2013 Webinar PARS 102: Session A) 10:00 - 12:00 1 Hour Break...

287

Training requirements. - 19...  

NLE Websites -- All DOE Office Websites (Extended Search)

G H I J K L M N O P Q R S T U V W X Y Z www.OSHA.gov Regulations (Standards - 29 CFR) Training requirements. - 1926.454 Regulations (Standards - 29 CFR) - Table of Contents * Part...

288

Medical Device Reliability BIOMATERIALS  

E-Print Network (OSTI)

of the U.S. healthcare industry, with annual sales exceeding $13 billion. In the past decade, nearly 3 to those found in explanted devices. Multilayer ceramic capacitors are the focus, as changes-grade ceramic capacitors. The Use Conditions Summary and the Failure Mode Effects Analysis are currently under

289

RADIO RANGING DEVICE  

DOE Patents (OSTI)

A description is given of a super-regenerative oscillator ranging device provided with radiating and receiving means and being capable of indicating the occurrence of that distance between itself and a reflecting object which so phases the received echo of energy of a preceding emitted oscillation that the intervals between oscillations become uniform.

Bogle, R.W.

1960-11-22T23:59:59.000Z

290

RADIO RANGING DEVICE  

DOE Patents (OSTI)

A radio ranging device is described. It utilizes a super regenerative detector-oscillator in which echoes of transmitted pulses are received in proper phase to reduce noise energy at a selected range and also at multiples of the selected range.

Nieset, R.T.

1961-05-16T23:59:59.000Z

291

Multiple gap photovoltaic device  

DOE Patents (OSTI)

A multiple gap photovoltaic device having a transparent electrical contact adjacent a first cell which in turn is adjacent a second cell on an opaque electrical contact, includes utilizing an amorphous semiconductor as the first cell and a crystalline semiconductor as the second cell.

Dalal, Vikram L. (Newark, DE)

1981-01-01T23:59:59.000Z

292

LOADING AND UNLOADING DEVICE  

DOE Patents (OSTI)

A device for loading and unloading fuel rods into and from a reactor tank through an access hole includes parallel links carrying a gripper. These links enable the gripper to go through the access hole and then to be moved laterally from the axis of the access hole to the various locations of the fuel rods in the reactor tank.

Treshow, M.

1960-08-16T23:59:59.000Z

293

ANNULAR IMPACTOR SAMPLING DEVICE  

DOE Patents (OSTI)

A high-rate air sampler capable of sampling alphaemitting particles as small as 0.5 microns is described. The device is a cylindrical shaped cup that fits in front of a suction tube and which has sticky grease coating along its base. Suction forces contaminated air against the periodically monitored particle absorbing grease.

Tait, G.W.C.

1959-03-31T23:59:59.000Z

294

Electron beam device  

DOE Patents (OSTI)

This patent pertains to an electron beam device in which a hollow target is symmetrically irradiated by a high energy, pulsed electron beam about its periphery and wherein the outer portion of the target has a thickness slightly greater than required to absorb the electron beam pulse energy. (auth)

Beckner, E.H.; Clauser, M.J.

1975-08-12T23:59:59.000Z

295

Energy absorption device  

DOE Patents (OSTI)

An energy absorbing device comprising two metal elements slip-fit together. The inner element has an enlarged portion thereupon which is forced, by a force overload to travel along the inside of the outer tube. The energy of the overload is absorbed by the forces of friction and deformation as the two elements are telescoped together.

Hertelendy, N.A.

1987-01-27T23:59:59.000Z

296

Simulating nanoscale semiconductor devices.  

SciTech Connect

The next generation of electronic devices will be developed at the nanoscale and molecular level, where quantum mechanical effects are observed. These effects must be accounted for in the design process for such small devices. One prototypical nanoscale semiconductor device under investigation is a resonant tunneling diode (RTD). Scientists are hopeful the quantum tunneling effects present in an RTD can be exploited to induce and sustain THz frequency current oscillations. To simulate the electron transport within the RTD, the Wigner-Poisson equations are used. These equations describe the time evolution of the electrons distribution within the device. In this paper, this model and a parameter study using this model will be presented. The parameter study involves calculating the steady-state current output from the RTD as a function of an applied voltage drop across the RTD and also calculating the stability of that solution. To implement the parameter study, the computational model was connected to LOCA (Library of Continuation Algorithms), a part of Sandia National Laboratories parallel solver project, Trilinos. Numerical results will be presented.

Salinger, Andrew Gerhard; Zhao, P. (North Carolina State University, Raleigh, NC); Woolard, D. L. (U. S. Army Research Laboratory, NC); Kelley, C. Tim (North Carolina State University, Raleigh, NC); Lasater, Matthew S. (North Carolina State University, Raleigh, NC)

2005-03-01T23:59:59.000Z

297

Table-top training program design  

SciTech Connect

This handbook establishes general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at DOE nuclear facilities.

NONE

1995-04-01T23:59:59.000Z

298

Supervisory Training Requirements | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Supervisory Training Requirements Supervisory Training Requirements The Office of Learning and Workforce Development has developed an inventory of training and developmental...

299

Classified Information Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Classified Information Training Classified Information Training Training Introduction to Classified Information, December 2013 GEN-16, "No Comment" Policy for Classified Subject...

300

Sky Train Corp | Open Energy Information  

Open Energy Info (EERE)

Sky Train Corp Jump to: navigation, search Name Sky Train Corp. Place Palm Harbor, Florida Zip 34684 Sector Services Product Sky Train Corporation is a consultant company...

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

Manpower Training Programs and Employment Stability  

E-Print Network (OSTI)

Evaluations of Training Programs with Experimental Data,MANPOWER TRAINING PROGRAMS AND EMPLOYMENT STABILITY by JosefS44 and JO548-SOZ. Manpower training programs and employment

Zweimuller, Josef; Winter- Ebmer, Rudolf

1992-01-01T23:59:59.000Z

302

User Program Training | ORNL Neutron Sciences  

NLE Websites -- All DOE Office Websites (Extended Search)

training before arriving at ORNL: ORNL Site Access Training For users going to HFIR: HFIR General User Access Training For users going to SNS: SNS Target Facility Access...

303

Energy Education and Workforce Development: Find Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training to someone by E-mail Share Energy Education and Workforce Development: Find Training on Facebook Tweet about Energy Education and Workforce Development: Find Training on...

304

OpenNet Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

OpenNet Training OpenNet Training Enforcement Guidance Oversight Reporting Classification Classification Training Institute Official Use Only Information Unclassified Controlled...

305

Evaluating Employee Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Evaluating Employee Training Evaluating Employee Training August 15, 2013 - 1:39pm Addthis Level 1 Course Evaluation Update Evaluating training activities is more important than...

306

Training Energy Efficiency Workers | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Energy Efficiency Workers Training Energy Efficiency Workers May 20, 2010 - 3:22pm Addthis The Pennsylvania College of Technology is providing training for the state's...

307

MSc Training in Research Methods Support  

E-Print Network (OSTI)

an effectivemeans of training Delivery Within Africa? A caseStolovitch, H. D. (2002). Telling ain't training.American Society for Training and Development. Strother,

Stern, R.D.; Coe, R.; Stern, D.A.; McDermott, B.M.

2013-01-01T23:59:59.000Z

308

BLM National Training Center | Open Energy Information  

Open Energy Info (EERE)

Training Center Jump to: navigation, search Logo: BLM National Training Center Name BLM National Training Center Parent Organization Bureau of Land Management Address 9828 North...

309

Methods of Training in the Workplace  

E-Print Network (OSTI)

which point towards training method choices aligned withhow successful these training methods are in creating valuewhether the design of training methods should take into

Danziger, Jim; Dunkle, Debbie

2005-01-01T23:59:59.000Z

310

Role Based Training | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Role Based Training Role Based Training Authorizing Official (AO)Authorizing Official Designated Representative (AODR) Role-Based Training Module. This course is available via...

311

Renewable Energy Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Renewable Energy Training October 7, 2013 - 10:16am Addthis Federal Energy Management Program (FEMP) training is available on demand to help Federal agencies understand...

312

Mandatory Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Mandatory Training Mandatory Training Mandatory Training All DOE Federal employees and selected groups of contractor employees are required by law to complete specific training requirements: Federal ethics; employee conduct; human resource management; safety; physical, personal, and information security; and continuity of operations training requirements. Departmental Heads of Elements may impose additional requirements to meet specific program or functional needs. For example, all DOE employees with security clearances above basic building entry are required to take an on-line class annually, but that training is administered apart from these classes. Employees are required to ensure that their training record, which can be accessed through Employee Self-Service, is complete. Responsible offices use official training

313

ORISE: Health Communication and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

around the world. Where we're training... Health Communication Map ORISE is helping train health care providers across the U.S. and around the world. View the map (PDF, 198 KB)...

314

Radiological training for tritium facilities  

Science Conference Proceedings (OSTI)

This program management guide describes a recommended implementation standard for core training as outlined in the DOE Radiological Control Manual (RCM). The standard is to assist those individuals, both within DOE and Managing and Operating contractors, identified as having responsibility for implementing the core training recommended by the RCM. This training may also be given to radiological workers using tritium to assist in meeting their job specific training requirements of 10 CFR 835.

NONE

1996-12-01T23:59:59.000Z

315

Federal Energy Management Program: Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content Last Updated: 05202010...

316

Radiological Assessor Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

141-2001 141-2001 April 2001 Change Notice No. 1 and Reaffirmation January 2007 DOE HANDBOOK Radiological Assessor Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration, National Technical Information Service, Springfield, VA 22161; (703) 605-6000. Radiological Assessor Training DOE-HDBK-1141-2001 iii

317

Training Program EOC-004  

NLE Websites -- All DOE Office Websites (Extended Search)

4 4 Introduction to the Incident Command System (FEMA ICS-100.b) COURSE SYLLABUS Subject Category: Emergency Operations Schedule: N/A Course Length: Approximately 3 hours Medical Approval: None Delivery Method: Online (http://training.fema.gov/emiweb/is/is100b.asp) Location: N/A Course Prerequisite: None Retraining/Recertification: None, recommended annually Course Purpose: ICS 100.b, Introduction to the Incident Command System, introduces the Incident Command System (ICS) and provides the foundation for higher level ICS training. This course describes the history, features and principles, and organizational structure of the Incident Command System. It also explains the relationship between ICS and the National Incident Management System (NIMS).

318

Radiological Assessor Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1-2008 1-2008 August 2008 DOE HANDBOOK Radiological Assessor Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. NOT MEASUREMENT SENSITIVE This document is available on the Department of Energy Technical Standards Program Web site at http://tis.eh.doe.gov/techs\ Foreword This Handbook describes an implementation process for training as recommended in Implementation Guide G441.1-1B, Radiation Protection Programs, March 2007, and as outlined in DOE- STD- 1098-99, CN1, March 2005, DOE Radiological Control (the Radiological Control Standard - RCS). The Handbook is meant to assist those individuals within the Department of

319

PARS II TRAINING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

1 Viewing and Reporting 1 Viewing and Reporting Training Workbook V1.0 Department of Energy May 10, 2010 May 10, 2010 PARS II 101 Viewing and Reporting V1.0 ii May 10, 2010 PARS II 101 Viewing and Reporting V1.0 iii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1 Find and View a Project ............................................................................................. 1 Sort the Project List ................................................................................................................. 3 Select a Project ....................................................................................................................... 3

320

Condensate Polishing Training Manual  

Science Conference Proceedings (OSTI)

Fossil units with properly designed and operated condensate polishing systems typically exhibit better availability, reliability, and performance than otherwise comparable units without condensate polishers. In spite of this, polishers are often viewed as non-essential equipment that increases capital and operating costs. The EPRI Condensate Training Program was initiated to assure that fossil plant personnel were aware of the benefits and value of condensate polishing and had up-to-date information on d...

2004-03-30T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Gunshot triangulation device testing  

NLE Websites -- All DOE Office Websites (Extended Search)

Gunshot triangulation device testing Gunshot triangulation device testing Report to the Fermilab Community Advisory Board, Oct. 28, 2010 The Fermilab security director outlined for the board last month a recurring problem of people shooting guns near the edges of the laboratory and bullets coming onto the site. Fermilab is installing a system to triangulate the gunshots to improve police response time. This will require a set-up calibration of two dozen gunshots during a total of 6 minutes at the laboratory site. The board was asked for recommendations about how and whom to inform of the test firing. In response to the board discussion, Fermilab plans to take the following actions:  The test firing will occur during the mid-day of a week day to minimize the number of residents

322

PRESSURE SENSING DEVICE  

DOE Patents (OSTI)

This device is primarily useful as a switch which is selectively operable to actuate in response to either absolute or differential predetermined pressures. The device generally comprises a pressure-tight housing divided by a movable impermeable diaphragm into two chambers, a reference pressure chamber and a bulb chamber containing the switching means and otherwise filled with an incompressible non-conducting fluid. The switch means comprises a normally collapsed bulb having an electrically conductive outer surface and a vent tube leading to the housing exterior. The normally collapsed bulb is disposed such that upon its inflation, respensive to air inflow from the vent, two contacts fixed within the bulb chamber are adapted to be electrically shorted by the conducting outer surface of the bulb.

Pope, K.E.

1959-12-15T23:59:59.000Z

323

Nuclear reactor safety device  

DOE Patents (OSTI)

A safety device is disclosed for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of an upward thermal excursion. Such safety device comprises a laminated helical ribbon configured as a tube-like helical coil having contiguous helical turns with slidably abutting edges. The helical coil is disclosed as a portion of a drive member connected axially to the control rod. The laminated ribbon is formed of outer and inner laminae. The material of the outer lamina has a greater thermal coefficient of expansion than the material of the inner lamina. In the event of an upward thermal excursion, the laminated helical coil curls inwardly to a smaller diameter. Such inward curling causes the total length of the helical coil to increase by a substantial increment, so that the control rod is axially repositioned by a corresponding amount to reduce the power output of the reactor.

Hutter, Ernest (Wilmette, IL)

1986-01-01T23:59:59.000Z

324

Tire deflation device  

Science Conference Proceedings (OSTI)

A tire deflation device includes (1) a component having a plurality of bores, (2) a plurality of spikes removably insertable into the plurality of bores and (3) a keeper within each among the plurality of bores, the keeper being configured to contact a sidewall surface of a spike among the plurality of spikes and to exert force upon the sidewall surface. In an embodiment, the tire deflation device includes (a) a component including a bore in a material, the bore including a receiving region, a sidewall surface and a base surface, (b) a channel extending from the sidewall surface into the material, (c) a keeper having a first section housed within the channel and a second section which extends past the sidewall surface into the receiving region, and (d) a spike removably insertable into the bore.

Barker, Stacey G. (Idaho Falls, ID)

2010-01-05T23:59:59.000Z

325

GAS DISCHARGE DEVICES  

DOE Patents (OSTI)

An apparatus utilized in introducing tritium gas into envelope of a gas discharge device for the purpose f maintaining the discharge path in ionized condition is described. ln addition to the cathode and anode, the ischarge device contains a zirconium or tantalum ilament arranged for external excitation and a metallic seed containing tritium, and also arranged to have a current passed through it. Initially, the zirconium or tantalum filament is vaporized to deposit its material adjacent the main discharge region. Then the tritium gas is released and, due to its affinity for the first released material, it deposits in the region of the main discharge where it is most effective in maintaining the discharge path in an ionized condition.

Jefferson, S.

1958-11-11T23:59:59.000Z

326

Regenerative braking device  

DOE Patents (OSTI)

Disclosed are several embodiments of a regenerative braking device for an automotive vehicle. The device includes a plurality of rubber rollers (24, 26) mounted for rotation between an input shaft (14) connectable to the vehicle drivetrain and an output shaft (16) which is drivingly connected to the input shaft by a variable ratio transmission (20). When the transmission ratio is such that the input shaft rotates faster than the output shaft, the rubber rollers are torsionally stressed to accumulate energy, thereby slowing the vehicle. When the transmission ratio is such that the output shaft rotates faster than the input shaft, the rubber rollers are torsionally relaxed to deliver accumulated energy, thereby accelerating or driving the vehicle.

Hoppie, Lyle O. (Birmingham, MI)

1982-01-12T23:59:59.000Z

327

Inertial energy storage device  

DOE Patents (OSTI)

The inertial energy storage device of the present invention comprises a composite ring formed of circumferentially wound resin-impregnated filament material, a flanged hollow metal hub concentrically disposed in the ring, and a plurality of discrete filament bandsets coupling the hub to the ring. Each bandset is formed of a pair of parallel bands affixed to the hub in a spaced apart relationship with the axis of rotation of the hub being disposed between the bands and with each band being in the configuration of a hoop extending about the ring along a chordal plane thereof. The bandsets are disposed in an angular relationship with one another so as to encircle the ring at spaced-apart circumferential locations while being disposed in an overlapping relationship on the flanges of the hub. The energy storage device of the present invention has the capability of substantial energy storage due to the relationship of the filament bands to the ring and the flanged hub.

Knight, Jr., Charles E. (Knoxville, TN); Kelly, James J. (Oak Ridge, TN); Pollard, Roy E. (Powell, TN)

1978-01-01T23:59:59.000Z

328

Light modulating device  

DOE Patents (OSTI)

In a device for transmitting light, means for controlling the transmissivity of the device, including a ceramic, reversibly electrochromic, crystalline element having a highly reflective state when injected with electrons and charge compensating ions and a highly transmissive state when the electrons and ions are removed, the crystalline element being characterized as having a reflectivity of at least 50% in the reflective state and not greater than 10% in the transmissive state, and means for modulating the crystalline element between the reflective and transmissive states by injecting ions into the crystalline element in response to an applied electrical current of a first polarity and removing the ions in response to an applied electrical current of a second polarity are disclosed. 1 fig.

Rauh, R.D.; Goldner, R.B.

1989-12-26T23:59:59.000Z

329

Wire brush fastening device  

DOE Patents (OSTI)

A fastening device is provided which is a variation on the conventional nut and bolt. The bolt has a longitudinal axis and threading helically affixed thereon along the longitudinal axis. A nut having a bore extending therethrough is provided. The bore of the nut has a greater diameter than the diameter of the bolt so the bolt can extend through the bore. An array of wire bristles are affixed within the bore so as to form a brush. The wire bristles extend inwardly from the bore and are constructed and arranged of the correct size, length and stiffness to guide the bolt within the bore and to restrain the bolt within the bore as required. A variety of applications of the wire brush nut are disclosed, including a bolt capture device and a test rig apparatus.

Meigs, Richard A. (East Concord, NY)

1995-01-01T23:59:59.000Z

330

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof. 9 figs.

Wood, R.L.

1987-03-23T23:59:59.000Z

331

Wire brush fastening device  

DOE Patents (OSTI)

A fastening device is provided which is a variation on the conventional nut and bolt. The bolt has a longitudinal axis and threading helically affixed thereon along the longitudinal axis. A nut having a bore extending therethrough is provided. The bore of the nut has a greater diameter than the diameter of the bolt so the bolt can extend through the bore. An array of wire bristles are affixed within the bore so as to form a brush. The wire bristles extend inwardly from the bore and are constructed and arranged of the correct size, length and stiffness to guide the bolt within the bore and to restrain the bolt within the bore as required. A variety of applications of the wire brush nut are disclosed, including a bolt capture device and a test rig apparatus.

Meigs, R.A.

1993-08-31T23:59:59.000Z

332

Support and maneuvering device  

DOE Patents (OSTI)

A support and maneuvering device includes an elongated flexible inflatable enclosure having a fixed end and a movable end. The movable end is collapsible toward the fixed end to a contracted position when the enclosure is in a noninflated condition. Upon inflation, the movable end is movable away from the fixed end to an extended position. The movable end includes means for mounting an article such as a solar reflector thereon. The device also includes a plurality of position controlling means disposed about the movable end to effect adjusting movement of portions thereof by predetermined amounts and for controlling an angle at which the article disposed at the movable end is oriented. The plurality of position controlling means limits a suitable number degrees of freedom of the movable end for transmitting a steering motion thereto and for controlling the position thereof.

Wood, Richard L. (Arvada, CO)

1988-01-01T23:59:59.000Z

333

Wire brush fastening device  

DOE Patents (OSTI)

A fastening device is provided which is a variation on the conventional nut and bolt. The bolt has a longitudinal axis and threading helically affixed thereon along the longitudinal axis. A nut having a bore extending therethrough is provided. The bore of the nut has a greater diameter than the diameter of the bolt so the bolt can extend through the bore. An array of wire bristles are affixed within the bore so as to form a brush. The wire bristles extend inwardly from the bore and are constructed and arranged of the correct size, length and stiffness to guide the bolt within the bore and to restrain the bolt within the bore as required. A variety of applications of the wire brush nut are disclosed, including a bolt capture device and a test rig apparatus. 13 figs.

Meigs, R.A.

1995-09-19T23:59:59.000Z

334

Cable shield connecting device  

DOE Patents (OSTI)

A cable shield connecting device for installation on a high voltage cable of the type having a metallic shield, the device including a relatively conformable, looped metal bar for placement around a bared portion of the metallic shield to extend circumferentially around a major portion of the circumference of the metallic shield while being spaced radially therefrom, a plurality of relatively flexible metallic fingers affixed to the bar, projecting from the bar in an axial direction and spaced circumferentially along the bar, each finger being attached to the metallic shield at a portion located remote from the bar to make electrical contact with the metallic shield, and a connecting conductor integral with the bar.

Silva, Frank A. (Basking Ridge, NJ)

1979-01-01T23:59:59.000Z

335

Training Module for Cyber Security in Nuclear Plant Digital Modifications  

Science Conference Proceedings (OSTI)

Nuclear power plants face increasing regulatory requirements from the U.S. Nuclear Regulatory Commission (NRC) and the Federal Energy Regulatory Commission (FERC) for cyber security of digital devices, components, and systems. The focus of these cyber security requirements is to protect plant digital computer systems, communications systems, and networks from cyber attacks that would affect reactor safety or generation reliability. This Electric Power Research Institute (EPRI) computer-based training mod...

2011-04-28T23:59:59.000Z

336

Medical Device Interoperability The lack of interoperability between medical devices  

E-Print Network (OSTI)

Medical Device Interoperability The lack of interoperability between medical devices can lead to preventable medical errors and potentially serious inefficiencies that could otherwise be avoided. Overview an accurate diagnostic and treatment discipline, medical devices are playing an ever-increasing role

337

Hybrid electroluminescent devices  

DOE Patents (OSTI)

A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

Shiang, Joseph John (Niskayuna, NY); Duggal, Anil Raj (Niskayuna, NY); Michael, Joseph Darryl (Schenectady, NY)

2010-08-03T23:59:59.000Z

338

Battery loading device  

SciTech Connect

A battery loading device for loading a power source battery, built in small appliances having a battery loading chamber for selectively loading a number of cylindrical unit batteries or a one body type battery having the same voltage as a number of cylindrical unit batteries, whereby the one body type battery and the battery loading chamber are shaped similarly and asymmetrically in order to prevent the one body type battery from being inserted in the wrong direction.

Phara, T.; Suzuki, M.

1984-08-28T23:59:59.000Z

339

Relativistic electron beam device  

DOE Patents (OSTI)

A design is given for an electron beam device for irradiating spherical hydrogen isotope bearing targets. The accelerator, which includes hollow cathodes facing each other, injects an anode plasma between the cathodes and produces an approximately 10 nanosecond, megajoule pulse between the anode plasma and the cathodes. Targets may be repetitively positioned within the plasma between the cathodes, and accelerator diode arrangement permits materials to survive operation in a fusion power source. (auth)

Freeman, J.R.; Poukey, J.W.; Shope, S.L.; Yonas, G.

1975-07-01T23:59:59.000Z

340

Residual gas analysis device  

SciTech Connect

A system is provided for testing the hermeticity of a package, such as a microelectromechanical systems package containing a sealed gas volume, with a sampling device that has the capability to isolate the package and breach the gas seal connected to a pulse valve that can controllably transmit small volumes down to 2 nanoliters to a gas chamber for analysis using gas chromatography/mass spectroscopy diagnostics.

Thornberg, Steven M. (Peralta, NM)

2012-07-31T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Environment/Health/Safety (EHS) Training  

NLE Websites -- All DOE Office Websites (Extended Search)

EH&S Training images Contact Us General Questions ehstraining@lbl.gov 510-495-2228 Contact list for Training Staff EHS0470 - GERT Training Access the online GERT training Download...

342

Training System (CHRIS) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

System (CHRIS) System (CHRIS) Training System (CHRIS) CHRIS Training is the computer system that Federal employees use to request training and view their training histories. Managers use the system to process and approve training requests (through CHRIS Training Workflow) and obtain various reports regarding training activities and associated costs. Training administrators use the system to establish courses and enroll employees. CHRIS is the Training System of Record for DOE employees. This means the training records in CHRIS are part of the employees' Official Personnel File (OPF). CHRIS Training is often called "Training Workflow." However, training workflow is actually the part of CHRIS Training that provides electronic routing of training requests. Employees submit training, and

343

PARS II Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

II Training PARS II Training PARS II training is delivered as traditional, instructor-led, hands-on classroom training, and also, as instructor-led Webinars with limited...

344

Energy Education & Workforce Development: Find Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Training Courses To pursue a clean energy career, you may need general as well as specialized training. This page has links to training and courses in energy efficiency...

345

Thermophotovoltaic energy conversion device  

DOE Patents (OSTI)

A thermophotovoltaic device and a method for making the thermophotovoltaic device are disclosed. The device includes an n-type semiconductor material substrate having top and bottom surfaces, a tunnel junction formed on the top surface of the substrate, a region of active layers formed on top of the tunnel junction and a back surface reflector (BSR). The tunnel junction includes a layer of heavily doped n-type semiconductor material that is formed on the top surface of the substrate and a layer of heavily doped p-type semiconductor material formed on the n-type layer. An optional pseudomorphic layer can be formed between the n-type and p-type layers. A region of active layers is formed on top of the tunnel junction. This region includes a base layer of p-type semiconductor material and an emitter layer of n-type semiconductor material. An optional front surface window layer can be formed on top of the emitter layer. An optional interference filter can be formed on top of the emitter layer or the front surface window layer when it is used. 1 fig.

Charache, G.W.; Baldasaro, P.F.; Egley, J.L.

1998-05-19T23:59:59.000Z

346

Sectional device handling tool  

DOE Patents (OSTI)

Apparatus for remotely handling a device in an irradiated underwater environment includes a plurality of tubular sections interconnected end-to-end to form a handling structure, the bottom section being adapted for connection to the device. A support section is connected to the top tubular section and is adapted to be suspended from an overhead crane. Each section is flanged at its opposite ends. Axially retractable bolts in each bottom flange are threadedly engageable with holes in the top flange of an adjacent section, each bolt being biased to its retracted position and retained in place on the bottom flange. Guide pins on each top flange cooperate with mating holes on adjacent bottom flanges to guide movement of the parts to the proper interconnection orientation. Each section carries two hydraulic line segments provided with quick-connect/disconnect fittings at their opposite ends for connection to the segments of adjacent tubular sections upon interconnection thereof to form control lines which are connectable to the device and to an associated control console.

Candee, Clark B. (Monroeville, PA)

1988-07-12T23:59:59.000Z

347

Thermophotovoltaic energy conversion device  

DOE Patents (OSTI)

A thermophotovoltaic device and a method for making the thermophotovoltaic device. The device includes an n-type semiconductor material substrate having top and bottom surfaces, a tunnel junction formed on the top surface of the substrate, a region of active layers formed on top of the tunnel junction and a back surface reflector (BSR). The tunnel junction includes a layer of heavily doped n-type semiconductor material that is formed on the top surface of the substrate and a layer of heavily doped p-type semiconductor material formed on the n-type layer. An optional pseudomorphic layer can be formed between the n-type and p-type layers. A region of active layers is formed on top of the tunnel junction. This region includes a base layer of p-type semiconductor material and an emitter layer of n-type semiconductor material. An optional front surface window layer can be formed on top of the emitter layer. An optional interference filter can be formed on top of the emitter layer or the front surface window layer when it is used.

Charache, Greg W. (Clifton Park, NY); Baldasaro, Paul F. (Clifton Park, NY); Egley, James L. (Burnt Hills, NY)

1998-01-01T23:59:59.000Z

348

Plasma jet ignition device  

DOE Patents (OSTI)

An ignition device of the plasma jet type is disclosed. The device has a cylindrical cavity formed in insulating material with an electrode at one end. The other end of the cylindrical cavity is closed by a metal plate with a small orifice in the center which plate serves as a second electrode. An arc jumping between the first electrode and the orifice plate causes the formation of a highly-ionized plasma in the cavity which is ejected through the orifice into the engine cylinder area to ignite the main fuel mixture. Two improvements are disclosed to enhance the operation of the device and the length of the plasma plume. One improvement is a metal hydride ring which is inserted in the cavity next to the first electrode. During operation, the high temperature in the cavity and the highly excited nature of the plasma breaks down the metal hydride, liberating hydrogen which acts as an additional fuel to help plasma formation. A second improvement consists of a cavity insert containing a plurality of spaced, metal rings. The rings act as secondary spark gap electrodes reducing the voltage needed to maintain the initial arc in the cavity.

McIlwain, Michael E. (Franklin, MA); Grant, Jonathan F. (Wayland, MA); Golenko, Zsolt (North Reading, MA); Wittstein, Alan D. (Fairfield, CT)

1985-01-15T23:59:59.000Z

349

Energy Management on Handheld Devices  

Science Conference Proceedings (OSTI)

Handheld devices are becoming ubiquitous and as their capabilities increase, they are starting to displace laptop computers - much as laptop computers have displaced desktop computers in many roles. Handheld devices are evolving from today's PDAs, organizers, ...

Marc A Viredaz; Lawrence S Brakmo; William R Hamburgen

2003-10-01T23:59:59.000Z

350

Device for separating a mixture  

SciTech Connect

A device is described for separating a mixture of, for example, oil and water consists of a number of elements treating the mixture in stages, said elements being arranged in overlying position in order to manufacture a compact device.

Koot, T.A.; Verpalen, W.A.

1981-05-05T23:59:59.000Z

351

Workforce Training Grant (Wisconsin) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Workforce Training Grant (Wisconsin) Workforce Training Grant (Wisconsin) Eligibility Commercial Agricultural Construction Developer Fuel Distributor Industrial Installer...

352

Computing with soliton trains in Bose-Einstein condensates  

E-Print Network (OSTI)

Computing devices can be implemented based on controlled generation of soliton trains in single and multicomponent Bose-Einstein condensates (BEC). Our concepts utilize the phenomenon that the frequency of soliton trains in BEC can be governed by changing interactions within the atom cloud [1]. We use this property to store numbers in terms of those frequencies for a short time until observation. The properties of soliton trains can be changed in an intended way by other components of BEC occupying comparable states or via phase engineering. We elucidate in which sense such an additional degree of freedom can be regarded as a tool for controlled manipulation of data. Finally the outcome of any manipulation made is read out by observing the signature within the density profile.

Florian Pinsker

2013-05-17T23:59:59.000Z

353

SWP Carbon Sequestration Training Center  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Center Presentation, Training Center Presentation, October 2010 SWP Carbon Sequestration Training Center Principal Investigators: New Mexico Tech, Andrew Campbell and Peter Mozley University of Utah, Brian McPherson Texas A&M University, Tarla Peterson SWP Training Center Presentation, October 2010 Background  Funded by DOE/NETL.  Purpose is to train more scientists and engineers for work in geological sequestration.  Three year grant.  Designed to be self sustaining. SWP Training Center Presentation, October 2010 Our goal is provide education about CCS at a variety of educational levels in order to promote a pipeline of future CCS scientists and engineers.  High School  K-12 Teachers  Undergraduate  Graduate  Professionals  Outreach SWP Training Center Presentation,

354

Medical Devices Metrology and Standards  

Science Conference Proceedings (OSTI)

... Medical Devices Metrology and Standards Needs (Download the flyer in pdf ... Standard and Metrology Needs for Surgical Robotics, presented by ...

2013-07-18T23:59:59.000Z

355

Limb Prosthetics Services and Devices  

Science Conference Proceedings (OSTI)

... of the field of biomechatronics, the science of fusing mechanical devices with human muscle, skeleton ... Growing Physical Health Consciousness. ...

2011-08-02T23:59:59.000Z

356

Device location summary - piton event  

SciTech Connect

This article describes the depth dimensions for the Piton Event Yellow device, which was fired on May 28, 1970.

Wondolowski, F.

1970-05-28T23:59:59.000Z

357

Hybrid free electron laser devices  

Science Conference Proceedings (OSTI)

We consider hybrid free electron laser devices consisting of Cerenkov and undulator sections. We will show that they can in principle be used as segmented devices and also show the possibility of exploiting Cerenkov devices for the generation of nonlinear harmonic coherent power. We discuss both oscillator and amplifier schemes.

Asgekar, Vivek; Dattoli, G. [Department of Physics, University of Pune, Pune 411007 (India); ENEA, Unita Tecnico Scientifica Technologie Fisiche, Avanzate, Centro Ricerche Frascati, C.P. 65-00044 Frascati, Rome (Italy)

2007-03-15T23:59:59.000Z

358

A CMOS Hearing Aid Device  

Science Conference Proceedings (OSTI)

In this paper a CMOS Hearing Aid Device is described. The system is composed of a low-distortion low-noise preamplifier, an automatic gain control (AGC), a fully programmable switched-capacitor filter (equalizer), and a control system. The device has ... Keywords: AGCs, CMOS amplifiers and filters, analog integrated circuits, hearing aid device

Jos Silva-Martnez; Sergio Sols-Bustos; Jorge Salcedo-Suer; Rogelio Rojas-Hernndez; Martin Schellenberg

1999-11-01T23:59:59.000Z

359

Improved Thermoelectric Devices: Advanced Semiconductor Materials for Thermoelectric Devices  

SciTech Connect

Broad Funding Opportunity Announcement Project: Phononic Devices is working to recapture waste heat and convert it into usable electric power. To do this, the company is using thermoelectric devices, which are made from advanced semiconductor materials that convert heat into electricity or actively remove heat for refrigeration and cooling purposes. Thermoelectric devices resemble computer chips, and they manage heat by manipulating the direction of electrons at the nanoscale. These devices arent new, but they are currently too inefficient and expensive for widespread use. Phononic Devices is using a high-performance, cost-effective thermoelectric design that will improve the devices efficiency and enable electronics manufacturers to more easily integrate them into their products.

None

2009-12-11T23:59:59.000Z

360

CMOS Reliability and Advanced Devices Group  

Science Conference Proceedings (OSTI)

... electron devices for the electronics industry by ... reliability issues in emerging electronic devices. ... Power Device and Thermal MetrologyThe Power ...

2013-04-26T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Radiography Device | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Radiography Device Radiography Device Radiography Device This scenario provides the planning instructions, guidance, and evaluation forms necessary to conduct an exercise involving a highway shipment of a radiography device (Class 7 - Radioactive). This exercise manual is one in a series of five scenarios developed by the Department of Energy Transportation Emergency Preparedness Program. Responding agencies may include several or more of the following: local municipal and county fire, police, sheriff, and Emergency Medical Services (EMS) personnel; state, local, and federal emergency response teams; emergency response contractors; and other emergency response resources that could potentially be provided by the carrier and the originating facility (shipper). Radiography Device.docx

362

Fiber optic monitoring device  

DOE Patents (OSTI)

A device for the purpose of monitoring light transmissions in optical fibers comprises a fiber optic tap that optically diverts a fraction of a transmitted optical signal without disrupting the integrity of the signal. The diverted signal is carried, preferably by the fiber optic tap, to a lens or lens system that disperses the light over a solid angle that facilitates viewing. The dispersed light indicates whether or not the monitored optical fiber or system of optical fibers is currently transmitting optical information. 4 figures.

Samborsky, J.K.

1993-10-05T23:59:59.000Z

363

Fiber optic monitoring device  

DOE Patents (OSTI)

This invention is comprised of a device for the purpose of monitoring light transmissions in optical fibers comprises a fiber optic tap that optically diverts a fraction of a transmitted optical signal without disrupting the integrity of the signal. The diverted signal is carried, preferably by the fiber optic tap, to a lens or lens system that disperses the light over a solid angle that facilitates viewing. The dispersed light indicates whether or not the monitored optical fiber or system of optical fibers is currently transmitting optical information.

Samborsky, J.K.

1992-12-31T23:59:59.000Z

364

Micro environmental sensing device  

DOE Patents (OSTI)

A microelectromechanical (MEM) acceleration switch is disclosed which includes a proof mass flexibly connected to a substrate, with the proof mass being moveable in a direction substantially perpendicular to the substrate in response to a sensed acceleration. An electrode on the proof mass contacts one or more electrodes located below the proof mass to provide a switch closure in response to the sensed acceleration. Electrical latching of the switch in the closed position is possible with an optional latching electrode. The MEM acceleration switch, which has applications for use as an environmental sensing device, can be fabricated using micromachining.

Polosky, Marc A. (Tijeras, NM); Lukens, Laurance L. (Tijeras, NM)

2006-05-02T23:59:59.000Z

365

Nanoscale Josephson Devices  

E-Print Network (OSTI)

, ferromagnetically (aligned ferromagnetic layers) FIB Focused Ion Beam GL Ginzburg-Landau GPIB General Purpose Interface Bus GMR Giant Magnetoresistance HTS High Temperature Superconductor I Insulator LED Light Emitting Diode LTS Low Temperature Superconductor MR... . The fabrication of intrinsic Josephson junctions in the high temperature superconductor Tl2Ba2CaCu2O8 will then be discussed, as well as Nb/MoSi2/Nb junctions, superconducting quantum interference devices, and finally GaN light emitting diodes. The work on Tl2Ba2...

Bell, Chris

366

Training Program EOC-007  

NLE Websites -- All DOE Office Websites (Extended Search)

7 7 An Introduction to the National Incident Management System (NIMS) (FEMA ICS-700.a) COURSE SYLLABUS Subject Category: Emergency Operations Schedule: N/A Course Length: Approximately 3 hours Medical Approval: None Delivery Method: Online (http://training.fema.gov/emiweb/is/is700a.asp) Location: N/A Course Prerequisite: None Retraining/Recertification: None, recommended annually Course Purpose: FEMA ICS-700.a introduces and overviews the National Incident Management System (NIMS). NIMS provides a consistent nationwide template to enable all government, private-sector, and nongovernmental organizations to work together during domestic incidents. Course Objectives: To familiarize members of the LBNL Emergency Operations Center (EOC) with National Incident

367

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Change Notice No. 1 2009 Change Notice No. 2 2011 DOE HANDBOOK RADIOLOGICAL CONTROL TECHNICIAN TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-HDBK-1122-2009 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1122-2009 Original Change Part 3 1.05-1 NCRP Report No. 93 "Ionizing Radiation Exposure of the Population of the United States". NCRP Report No. 160 "Ionizing Radiation Exposure of the Population

368

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

98 98 October 1998 Change Notice No. 1 June 2001 Change Notice No. 2 December 2003 Reaffirmation with Errata May 2004 DOE HANDBOOK Radiological Worker Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-98 ii This document has been reproduced directly from the best available copy. Available to DOE and DOE contractors from ES&H Technical Information Services, U.S. Department of Energy, (800) 473-4375, fax: (301) 903-9823. Available to the public from the U.S. Department of Commerce, Technology Administration,

369

PARS II TRAINING  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

10 (V1.1) PARS II 102 Monthly Updating and Reporting i 10 (V1.1) PARS II 102 Monthly Updating and Reporting i Project Assessment and Reporting System PARS II 102 Monthly Updating and Reporting Training Workbook (PARS II Release 1.1) Department of Energy September 13, 2010 September 13,, 2010 (V1.1) PARS II 102 Monthly Updating and Reporting ii Table of Contents OVERSIGHT and ASSESSMENT ........................................................................................................ 1 Exercise 1: Find and View a Project ............................................................................................ 1 Sort the Project List ................................................................................................................. 3

370

Basic Instructor Training Course  

Science Conference Proceedings (OSTI)

Originally, the program intent was to establish foundation for instructors in the UNC Training Department to become certified in accordance to nuclear industry-accepted standards. However, personnel from other organizations, along with DOE representatives and United States government contractors, have utilized the program as a learning base for planning, developing, and implementing instructional presentations. The course content presents a wide variety of material relative to learning behaviors, educational theory, and instructional methodology. The content is presented on a team-teaching basis with usually three or more different instructors. This provides students opportunity to observe a variety of instructional styles, mannerisms, and personalities, lending interest and student introspection.

Morgan, M.P.

1987-01-01T23:59:59.000Z

371

The Development, Content, Design, and Conduct of the 2011 Piloted US DOE Nuclear Criticality Safety Program Criticality Safety Engineering Training and Education Project  

SciTech Connect

In May 1973 the University of New Mexico conducted the first nationwide criticality safety training and education week-long short course for nuclear criticality safety engineers. Subsequent to that course, the Los Alamos Critical Experiments Facility (LACEF) developed very successful 'hands-on' subcritical and critical training programs for operators, supervisors, and engineering staff. Since the inception of the US Department of Energy (DOE) Nuclear Criticality Technology and Safety Project (NCT&SP) in 1983, the DOE has stimulated contractor facilities and laboratories to collaborate in the furthering of nuclear criticality as a discipline. That effort included the education and training of nuclear criticality safety engineers (NCSEs). In 1985 a textbook was written that established a path toward formalizing education and training for NCSEs. Though the NCT&SP went through a brief hiatus from 1990 to 1992, other DOE-supported programs were evolving to the benefit of NCSE training and education. In 1993 the DOE established a Nuclear Criticality Safety Program (NCSP) and undertook a comprehensive development effort to expand the extant LACEF 'hands-on' course specifically for the education and training of NCSEs. That successful education and training was interrupted in 2006 for the closing of the LACEF and the accompanying movement of materials and critical experiment machines to the Nevada Test Site. Prior to that closing, the Lawrence Livermore National Laboratory (LLNL) was commissioned by the US DOE NCSP to establish an independent hands-on NCSE subcritical education and training course. The course provided an interim transition for the establishment of a reinvigorated and expanded two-week NCSE education and training program in 2011. The 2011 piloted two-week course was coordinated by the Oak Ridge National Laboratory (ORNL) and jointly conducted by the Los Alamos National Laboratory (LANL) classroom education and facility training, the Sandia National Laboratory (SNL) hands-on criticality experiments training, and the US DOE National Criticality Experiment Research Center (NCERC) hands-on criticality experiments training that is jointly supported by LLNL and LANL and located at the Nevada National Security Site (NNSS) This paper provides the description of the bases, content, and conduct of the piloted, and future US DOE NCSP Criticality Safety Engineer Training and Education Project.

Hopper, Calvin Mitchell [ORNL

2011-01-01T23:59:59.000Z

372

The Development, Content, Design, and Conduct of the 2011 Piloted US DOE Nuclear Criticality Safety Program Criticality Safety Engineering Training and Education Project  

SciTech Connect

In May 1973 the University of New Mexico conducted the first nationwide criticality safety training and education week-long short course for nuclear criticality safety engineers. Subsequent to that course, the Los Alamos Critical Experiments Facility (LACEF) developed very successful 'hands-on' subcritical and critical training programs for operators, supervisors, and engineering staff. Since the inception of the US Department of Energy (DOE) Nuclear Criticality Technology and Safety Project (NCT&SP) in 1983, the DOE has stimulated contractor facilities and laboratories to collaborate in the furthering of nuclear criticality as a discipline. That effort included the education and training of nuclear criticality safety engineers (NCSEs). In 1985 a textbook was written that established a path toward formalizing education and training for NCSEs. Though the NCT&SP went through a brief hiatus from 1990 to 1992, other DOE-supported programs were evolving to the benefit of NCSE training and education. In 1993 the DOE established a Nuclear Criticality Safety Program (NCSP) and undertook a comprehensive development effort to expand the extant LACEF 'hands-on' course specifically for the education and training of NCSEs. That successful education and training was interrupted in 2006 for the closing of the LACEF and the accompanying movement of materials and critical experiment machines to the Nevada Test Site. Prior to that closing, the Lawrence Livermore National Laboratory (LLNL) was commissioned by the US DOE NCSP to establish an independent hands-on NCSE subcritical education and training course. The course provided an interim transition for the establishment of a reinvigorated and expanded two-week NCSE education and training program in 2011. The 2011 piloted two-week course was coordinated by the Oak Ridge National Laboratory (ORNL) and jointly conducted by the Los Alamos National Laboratory (LANL) classroom education and facility training, the Sandia National Laboratory (SNL) hands-on criticality experiments training, and the US DOE National Criticality Experiment Research Center (NCERC) hands-on criticality experiments training that is jointly supported by LLNL and LANL and located at the Nevada National Security Site (NNSS) This paper provides the description of the bases, content, and conduct of the piloted, and future US DOE NCSP Criticality Safety Engineer Training and Education Project.

Hopper, Calvin Mitchell [ORNL

2011-01-01T23:59:59.000Z

373

ALARA Training for Technical Support Personnel  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

4 of 5) 4 of 5) ALARA Training for Technical Support Personnel Appendices Coordinated and Conducted for Office of Safety, Health and Security U.S. Department of Energy DOE-STD-1110-08 2 This page intentionally left blank. DOE-STD-1110-08 3 APPENDIX A - APPLICATION OF ALARA TO FACILITY SYSTEM DESIGN I. AIRBORNE RADIOACTIVITY AND HVAC SYSTEM CONSIDERATIONS Ventilation systems deserve separate ALARA considerations because of the possibility of increased doses due to internal uptake of airborne and surface contamination. Routinely requiring workers to wear respiratory devices is not the preferred solution to reducing internal deposition of airborne radioactive materials. The facility ventilation system(s) are a major means for controlling airborne radioactivity

374

Training and Medical Training Issues Topic Group Meeting Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Medical Training Issues Topic Group Meeting Summary Philadelphia, PA July 13, 1999 Fire Chief Bill Ruting (La Grange, IL, Fire Department) presented the results of the topic...

375

Training Program EHS 604 ~ Hazardous Waste Generator Training  

NLE Websites -- All DOE Office Websites (Extended Search)

604 Hazardous Waste Generator Training Course Syllabus Subject Category: Waste Management Course Prerequisite: EHS0348 or equivalent Course Length: 45 minutes Medical Approval:...

376

Training Program EHS 738 ~ Bloodborne Pathogen Training Annual...  

NLE Websites -- All DOE Office Websites (Extended Search)

38 Bloodborne Pathogen Training Annual Refresher Course Syllabus Subject Category: Occupational Safety Course Prerequisite: No Course Length: 45 minutes Medical Approval: No...

377

Training Program EOC-010 Everbridge Training COURSE SYLLABUS  

NLE Websites -- All DOE Office Websites (Extended Search)

10 Everbridge Training COURSE SYLLABUS Subject Category: Emergency Operations Schedule: Semi-Annually (or Upon Request) Course Length: 1 hour Medical Approval: None Delivery...

378

Training Program EHS 740 ~ Human Subjects Research Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

740 Human Subjects Research Training Program Course Syllabus Subject Category: Human Subjects Research Course Prerequisite: None Course Length: 1 hour Medical Approval: None...

379

Training Program EHS-145: First Responder Hazards Awareness Training  

NLE Websites -- All DOE Office Websites (Extended Search)

45: First Responder Hazards Awareness Training COURSE SYLLABUS Subject Category: Emergency Preparedness Schedule: NA Course Length: 15-30 minutes Medical Approval: NA Delivery...

380

Training Program EOC-003 EOC Training for Executives COURSE SYLLABUS  

NLE Websites -- All DOE Office Websites (Extended Search)

3 EOC Training for Executives COURSE SYLLABUS Subject Category: Emergency Operations Schedule: Upon Request Course Length: 1 hour Medical Approval: None Delivery Method: Classroom...

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Sustainable Building Design Training | Open Energy Information  

Open Energy Info (EERE)

Sustainable Building Design Training Sustainable Building Design Training Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Sustainable Building Design Training Agency/Company /Organization: United States Department of Energy Focus Area: Buildings Resource Type: Training materials Website: www1.eere.energy.gov/femp/program/sustainable_training.html References: Sustainable Building Design Training[1] Logo: Sustainable Building Design Training This training, sponsored by FEMP and other organizations, provides Federal agencies the essential information and skills needed to plan, implement, and manage sustainable buildings and sites. Overview "Sustainable Design Training Opportunities to learn more about sustainable design are available throughout the year. This training, sponsored by FEMP

382

Fluid flow monitoring device  

DOE Patents (OSTI)

This invention consists of a flow meter and temperature measuring device comprising a tube with a body centered therein for restricting flow and a sleeve at the upper end of the tube to carry several channels formed longitudinally in the sleeve to the appropriate axial location where they penetrate the tube to allow pressure measurements and temperature measurements with thermocouples. The high pressure measurement is made using a channel penetrating the tube away from the body and the low pressure measurement is made at a location at the widest part of the body. An end plug seals the end of the device and holes at its upper end allow fluid to pass from the interior of the tube into a plenum. The channels are made by cutting grooves in the sleeve, the grooves widened at the surface of the sleeve and then a strip of sleeve material is welded to the grooves closing the channels. Preferably the sleeve is packed with powdered graphite before cutting the grooves and welding the strips.

McKay, M.D.; Sweeney, C.E.

1991-03-05T23:59:59.000Z

383

Nondestructive Evaluation: Training Course Materials  

Science Conference Proceedings (OSTI)

One of the final steps in the technology transfer process is personnel training. Training personnel in fundamental, and advanced nondestructive evaluation (NDE) methods and techniques is a major theme of the Nuclear NDE Program. Training is an essential part of NDE technology transfer and application, and it is an important element in maintaining the quality and supply of the NDE workforce serving the nuclear power industry. This has increasing importance with the aging workforce, the dawn of the nuclear...

2008-12-22T23:59:59.000Z

384

Nondestructive Evaluation: Training Program Update  

Science Conference Proceedings (OSTI)

One of the final steps in the technology transfer process is personnel training. Training personnel in fundamental, and advanced nondestructive evaluation (NDE) methods and techniques is a major theme of the Nuclear NDE Program. Training is an essential part of NDE technology transfer and application, and it is an important element in maintaining the quality and supply of the NDE workforce serving the nuclear power industry. This has increasing importance with the aging workforce, the dawn of the nuclear...

2008-12-22T23:59:59.000Z

385

Computer Based Training: Pressure Measurement  

Science Conference Proceedings (OSTI)

ETTM Pressure Measurement is a computer based training module that allows users to access training when desired and review it at their own pace. It provides graphics and limited interactive features to enhance learning. The purpose of this training module is to provide an understanding of the engineering principles associated with pressure measurement through the review of: Definitions and laws, Operation of some typical plant pressure instruments and, Installation and correction considerations that will...

2010-11-12T23:59:59.000Z

386

FAST Program Computer Based Training  

Science Conference Proceedings (OSTI)

FAST CBT is a computer based training module that allows users to access training when desired and review it at their own pace. It provides graphics and interactive features to enhance learning. This computer based training module was created to help instruct users on an existing EPRI engineering computer program Product ID# 1004565 (FAST 1.0 Flow Path Analysis for Steam Turbines, Version 1.0). Users of this training will consist mainly of steam turbine performance engineers and outage managers. A subjec...

2010-11-17T23:59:59.000Z

387

Physics Department Safety & Training Office  

NLE Websites -- All DOE Office Websites (Extended Search)

number (631) 344-3456 and follow the automated instructions. High Energy Physics Nuclear Physics Condensed Matter Physics The Physics Safety and Training office hosts Group...

388

Postdoctoral Appointees - Training and Development  

NLE Websites -- All DOE Office Websites (Extended Search)

both at the Laboratory and offsite. Below you will find information on the various training programs and opportunities for development that the Postdoctoral Office recommends....

389

A sustainable model for training teachers to use pivotal response training  

E-Print Network (OSTI)

J. R. , (1995). Pyramidal staff training in the extension ofvia pivotal response training and the individualization ofof pivotal response training. Journal of Speech, Language

Suhrheinrich, Jessica Brooke

2010-01-01T23:59:59.000Z

390

Training Program Handbook: A systematic approach to training  

SciTech Connect

This DOE handbook describes a systematic method for establishing and maintaining training programs that meet the requirements and expectations of DOE Orders 5480.18B and 5480.20. The systematic approach to training includes 5 phases: Analysis, design, development, implementation, and evaluation.

Not Available

1994-08-01T23:59:59.000Z

391

Measuring Devices: Compressed Natural Gas Retail Motor ...  

Science Conference Proceedings (OSTI)

Compressed Natural Gas Retail Motor-Fuel Dispensers. ... Hydrogen Measuring Devices; Liquefied Petroleum Gas Liquid-Measuring Devices; ...

2010-10-05T23:59:59.000Z

392

Electrical safety device  

DOE Patents (OSTI)

An electrical safety device for use in power tools that is designed to automatically discontinue operation of the power tool upon physical contact of the tool with a concealed conductive material. A step down transformer is used to supply the operating power for a disconnect relay and a reset relay. When physical contact is made between the power tool and the conductive material, an electrical circuit through the disconnect relay is completed and the operation of the power tool is automatically interrupted. Once the contact between the tool and conductive material is broken, the power tool can be quickly and easily reactivated by a reset push button activating the reset relay. A remote reset is provided for convenience and efficiency of operation.

White, David B. (Greenock, PA)

1991-01-01T23:59:59.000Z

393

Electrical safety device  

DOE Patents (OSTI)

This invention consists of an electrical safety device for use in power tools that is designed to automatically discontinue operation of the power tool upon physical contact of the tool with a concealed conductive material. A step down transformer is used to supply the operating power for a disconnect relay and reset delay. When physical contact is made between the power tool and the conductive material, an electrical circuit through the disconnect relay is completed and the operation of the power tool is automatically interrupted. Once the contact between the tool and conductive material is broken, the power tool can be quickly and easily reactivated by a reset push button activating the reset relay. A remote reset is provided for convenience and efficiency of operation.

White, D.B.

1990-09-06T23:59:59.000Z

394

Nuclear reactor safety device  

DOE Patents (OSTI)

A safety device is described for use in a nuclear reactor for axially repositioning a control rod with respect to the reactor core in the event of a thermal excursion. It comprises a laminated strip helically configured to form a tube, said tube being in operative relation to said control rod. The laminated strip is formed of at least two materials having different thermal coefficients of expansion, and is helically configured such that the material forming the outer lamina of the tube has a greater thermal coefficient of expansion than the material forming the inner lamina of said tube. In the event of a thermal excursion the laminated strip will tend to curl inwardly so that said tube will increase in length, whereby as said tube increases in length it exerts a force on said control rod to axially reposition said control rod with respect to said core.

Hutter, E.

1983-08-15T23:59:59.000Z

395

False color viewing device  

DOE Patents (OSTI)

This invention consists of a viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching, the user`s eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

Kronberg, J.W.

1991-05-08T23:59:59.000Z

396

Programmable logic devices  

Science Conference Proceedings (OSTI)

Erasable programmable logic devices (EPLDs) were investigated to determine their advantages and/or disadvantages in Test Equipment Engineering applications. It was found that EPLDs performed as well as or better than identical circuits using standard TTL logic. The chip count in these circuits was reduced, saving printed circuit board space and shortening fabrication and prove-in time. Troubleshooting circuits of EPLDs was also easier with 10 to 100 times fewer wires needed. The reduced number of integrated circuits (ICs) contributed to faster system speeds and an overall lower power consumption. In some cases changes to the circuit became software changes using EPLDs instead of hardware changes for standard logic. Using EPLDs was fairly easy; however, as with any new technology, a learning curve must be overcome before EPLDs can be used efficiently. The many benefits of EPLDs outweighed this initial inconvenience.

Jacobs, J.L.

1993-04-01T23:59:59.000Z

397

TWO-SPEED DEVICE  

DOE Patents (OSTI)

A two-speed device is described comprising a two-part stop engageable with a follower. The two-pant stop comprises first and second members in threaded engagement with each other. The first member is restrained against rotation but is free to move longitudinally, and the second member is free to move arially and rotatively. Means are provided to impart rotation to the second member. The follower is engageable first with an end of one member and then with the corresponding end of the other member after some relative longitudinal movement of the members with respect to one another due to the rotation of the second member and the holding of the first member against rotation.

Brunson, G.S. Jr.

1961-04-01T23:59:59.000Z

398

Multichannel optical sensing device  

DOE Patents (OSTI)

A multichannel optical sensing device is disclosed, for measuring the outr sky luminance or illuminance or the luminance or illuminance distribution in a room, comprising a plurality of light receptors, an optical shutter matrix including a plurality of liquid crystal optical shutter elements operable by electrical control signals between light transmitting and light stopping conditions, fiber optic elements connected between the receptors and the shutter elements, a microprocessor based programmable control unit for selectively supplying control signals to the optical shutter elements in a programmable sequence, a photodetector including an optical integrating spherical chamber having an input port for receiving the light from the shutter matrix and at least one detector element in the spherical chamber for producing output signals corresponding to the light, and output units for utilizing the output signals including a storage unit having a control connection to the microprocessor based programmable control unit for storing the output signals under the sequence control of the programmable control unit.

Selkowitz, Stephen E. (Piedmont, CA)

1990-01-01T23:59:59.000Z

399

False color viewing device  

DOE Patents (OSTI)

A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage.

Kronberg, James W. (108 Independent Blvd., Aiken, SC 29801)

1992-01-01T23:59:59.000Z

400

Tool setting device  

DOE Patents (OSTI)

The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

Brown, Raymond J. (Clinton, TN)

1977-01-01T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Capacitance measuring device  

DOE Patents (OSTI)

A capacitance measuring circuit is provided in which an unknown capacitance is measured by comparing the charge stored in the unknown capacitor with that stored in a known capacitance. Equal and opposite voltages are repetitively simultaneously switched onto the capacitors through an electronic switch driven by a pulse generator to charge the capacitors during the ''on'' portion of the cycle. The stored charge is compared by summing discharge currents flowing through matched resistors at the input of a current sensor during the ''off'' portion of the switching cycle. The net current measured is thus proportional to the difference in value of the two capacitances. The circuit is capable of providing much needed accuracy and stability to a great variety of capacitance-based measurement devices at a relatively low cost.

Andrews, W.H. Jr.

1984-08-01T23:59:59.000Z

402

Ceramics for fusion devices  

SciTech Connect

Ceramics are required for a number of applications in fusion devices, among the most critical of which are magnetic coil insulators, windows for RF heating systems, and structural uses. Radiation effects dominate consideration of candidate materials, although good pre-irradiation properties are a requisite. Materials and components can be optimized by careful control of chemical and microstructural content, and application of brittle material design and testing techniques. Future directions for research and development should include further extension of the data base in the areas of electrical, structural, and thermal properties; establishment of a fission neutron/fusion neutron correlation including transmutation gas effects; and development of new materials tailored to meet the specific needs of fusion reactors.

Clinard, F.W. Jr.

1984-01-01T23:59:59.000Z

403

False color viewing device  

DOE Patents (OSTI)

A viewing device for observing objects in near-infrared false-color comprising a pair of goggles with one or more filters in the apertures, and pads that engage the face for blocking stray light from the sides so that all light reaching the user's eyes come through the filters. The filters attenuate most visible light and pass near-infrared (having wavelengths longer than approximately 700 nm) and a small amount of blue-green and blue-violet (having wavelengths in the 500 to 520 nm and shorter than 435 nm, respectively). The goggles are useful for looking at vegetation to identify different species and for determining the health of the vegetation, and to detect some forms of camouflage. 7 figs.

Kronberg, J.W.

1992-10-20T23:59:59.000Z

404

Personal annunciation device  

DOE Patents (OSTI)

A personal annunciation device (PAD) providing, in an area of interest, compensatory annunciation of the presence of an abnormal condition in a hazardous area and accountability of the user of the PAD. Compensatory annunciation supplements primary annunciation provided by an emergency notification system (ENS). A detection system detects an abnormal condition, and a wireless transmission system transmits a wireless transmission to the PAD. The PAD has a housing enclosing the components of the PAD including a communication module for receiving the wireless transmission, a power supply, processor, memory, annunciation system, and RFID module. The RFID module has an RFID receiver that listens for an RFID transmission from an RFID reader disposed in a portal of an area of interest. The PAD identifies the transmission and changes its operating state based on the transmission. The RFID readers recognize, record, and transmit the state of the PAD to a base station providing accountability of the wearer.

Angelo, Peter (Oak Ridge, TN); Younkin, James (Oak Ridge, TN); DeMint, Paul (Kingston, TN)

2011-01-25T23:59:59.000Z

405

On Modelling Train Traffic in a Model Train System  

E-Print Network (OSTI)

The paper describes the design of a coloured Petri net model for a rather complex model train system. The purpose of this system is to teach graduate CS students net modelling and analysis techniques, and the systematic concersion of non--trivial net models into fully operational real systems. The track layout of this system currently includes three main cyclic tracks, each subdivided into several sections, three switchyards of several sidings, and also interconnecting tracks via which trains may change main tracks and directions. The idea is to equip each of several trains - currently up to ten - with its own travel plan. It specifies a sequence of tracks through which the train must be routed in the given order. Execution of these plans must be dynamically coordinated based on locally made decisions about the allocation of track sections to requesting trains so that essential safety and liveness properties are met. The paper first introduces the basic net components necessary to mod...

Wolfgang Hielscher; Lars Urbszat; Claus Reinke; Werner Kluge

1998-01-01T23:59:59.000Z

406

Alta Devices | Open Energy Information  

Open Energy Info (EERE)

Devices Devices Jump to: navigation, search Name Alta Devices Place Santa Clara, California Zip 95054 Product California-based stealth mode company developing low-cost compound-PV-semiconductors. Website https://www.altadevices.com/ References Alta Devices[1] Information About Partnership with NREL Partnership with NREL Yes Partnership Type Incubator Partnering Center within NREL National Center for Photovoltaics Partnership Year 2010 Link to project description http://www.nrel.gov/news/press/2010/802.html LinkedIn Connections CrunchBase Profile No CrunchBase profile. Create one now! This article is a stub. You can help OpenEI by expanding it. Alta Devices is a company located in Santa Clara, California . References ↑ "Alta Devices" Retrieved from

407

Resonant Tunneling Device Logic Circuits  

E-Print Network (OSTI)

This report is a summary of the activities in the field of resonant tunneling device circuit design. The presented work has been performed by the Department of Microelectronics of the University of Dortmund (UNIDO) and the Solid-State Electronics Department of the Gerhard-Mercator University of Duisburg (GMUD) during the first year of the Microelectronics Advanced Research Initiative projects ANSWERS (Autonomous Nanoelectronic Systems with Extended Replication and Signalling) and LOCOM (Logic Circuits with Reduced Complexity based on Devices with Higher Functionality). As part of the ANSWERS work-package the principal task of UNIDO is to investigate novel logic circuit architectures for resonant tunneling devices, to perform circuit simulations, and to specify the electrical device parameters. The basic device configuration is a monolithically integrated resonant tunneling diode heterostructure field-effect transistor (RTD-HFET). This device and the demonstrator circuits are fabricated by the LOCOM partner GMUD.

Christian Pacha; Peter Glsektter; Karl Goser; Werner Prost; Uwe Auer; Franz-J. Tegude

1999-01-01T23:59:59.000Z

408

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

8 8 December 2008 Change Notice 1 June 2009 DOE HANDBOOK Radiological Worker Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 ii This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1130-2008 Original Change Part 2 Module 2 page 17 Medical radiation sources (total average dose ~ 54 mrem/yr) 1) X rays (total average dose ~ 40mrem/yr) a) X rays are similar to gamma rays; however, they originate outside the nucleus.

409

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TS TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 December 2008 Change Notice 2 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1130-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 2 DOE-HDBK-1130-2008 Original Change Throughout Program Management Guide Instructor's Guide Student's Guide "Shall" and "Must" statements Program Management Instructor's Material Student's Material Reworded to non-mandatory language unless associated with a requirement document.

410

EOTA TRAINING SPECIFICATION  

NLE Websites -- All DOE Office Websites (Extended Search)

5, Analysis Project Plan 11_0427 5, Analysis Project Plan 11_0427 1 of 6 EOTA - Business Form Document Title: Analysis Project Plan Document Number: ISDF-045 Rev. 11_0427 Document Owner: Elizabeth Sousa Backup Owner: Melissa Otero Approver(s): Melissa Otero Parent Document: ISDP-010 Course/Analysis Initiation Process Notify of Changes: ISD, QAM, ITT, MGT Referenced Document(s): NA ISDF-045, Analysis Project Plan 11_0427 2 of 6 Revision History: Rev. Description of Change 10_0630 Initial Release 11_0427 Modified verbiage for clarification; minor editorial updates. ISDF-045, Analysis Project Plan 11_0427 3 of 6 DOE/NNSA Emergency Operations Training Academy (EOTA) Name of Course: PROJECT TITLE PROJECT Number: PROJECT CODE Contractor Project Number: (Prime Contractor Assigned Code)

411

Radiological Control Technician Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

_______ _______ Change Notice 1 June 2009 DOE HANDBOOK RADIOLOGICAL CONTROL TECHNICIAN TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive DOE-HDBK-1122-2009 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1122-2009 Original Change Part 3 1.05-1 NCRP Report No. 93 "Ionizing Radiation Exposure of the Population of the United States". NCRP Report No. 160 "Ionizing Radiation Exposure of the Population of the United States". Part 3 1.05-9 4) U.S. national average from diagnostic

412

Radiological Worker Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TS TS NOT MEASUREMENT SENSITIVE DOE-HDBK-1130-2008 December 2008 Change Notice 2 Reaffirmed 2013 DOE HANDBOOK Radiological Worker Training U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. DOE-HDBK-1130-2008 This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 2 DOE-HDBK-1130-2008 Original Change Throughout Program Management Guide Instructor's Guide Student's Guide "Shall" and "Must" statements Program Management Instructor's Material Student's Material Reworded to non-mandatory language unless associated with a requirement document.

413

Argonne CNM: Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Safety at Work Safety at Work (printable pdf version) In case of emergency or if you need help or assistance dial Argonne's Protective Force: 911 (from Argonne phones) or (630) 252-1911 (from cell phones) As a staff member or user at the Center for Nanoscale Materials (CNM), you need to be aware of safety regulations at Argonne National Laboratory. You are also required to have taken any safety, orientation, and training classes or courses specified by your User Work Authorization(s) and/or work planning and control documents prior to beginning your work. For safety and security reasons, it is necessary to know of all facility users present in the CNM (Buildings 440 and 441). Users are required to sign in and out in the visitors logbook located in Room A119. Some detailed emergency information is provided on the Argonne National Laboratory web site. Brief instructions and general guidelines follow.

414

General Employee Radiological Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Not Measurement Not Measurement Sensitive DOE-HDBK-1131-2007 December 2007_______ Change Notice 1 Reaffirmed 2013 DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1131-2007 Original Change Part 2 page 5 The average annual radiation dose to a member of the general population is about 360 millirem/year. The average annual radiation dose to a member of the general population is about 620 millirem/year. Part 2 page 5 Natural background radiation is by far the

415

General Employee Radiological Training  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

_______ _______ Change Notice 1 June 2009 DOE HANDBOOK GENERAL EMPLOYEE RADIOLOGICAL TRAINING U.S. Department of Energy AREA TRNG Washington, D.C. 20585 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Not Measurement Sensitive This document is available on the Department of Energy Technical Standards Program Web Site at http://www.hss.energy.gov/nuclearsafety/techstds/ Change 1 DOE-HDBK-1131-2007 Original Change Part 2 page 5 The average annual radiation dose to a member of the general population is about 360 millirem/year. The average annual radiation dose to a member of the general population is about 620 millirem/year. Part 2 page 5 Natural background radiation is by far the

416

Safe-haven locking device  

DOE Patents (OSTI)

Disclosed is a locking device for eliminating external control of a secured space formed by fixed and movable barriers. The locking device uses externally and internally controlled locksets and a movable strike, operable from the secured side of the movable barrier, to selectively engage either lockset. A disengagement device, for preventing forces from being applied to the lock bolts is also disclosed. In this manner, a secured space can be controlled from the secured side as a safe-haven. 4 figures.

Williams, J.V.

1984-04-26T23:59:59.000Z

417

Microbiopsy/precision cutting devices  

DOE Patents (OSTI)

Devices are disclosed for performing tissue biopsy on a small scale (microbiopsy). By reducing the size of the biopsy tool and removing only a small amount of tissue or other material in a minimally invasive manner, the risks, costs, injury and patient discomfort associated with traditional biopsy procedures can be reduced. By using micromachining and precision machining capabilities, it is possible to fabricate small biopsy/cutting devices from silicon. These devices can be used in one of four ways (1) intravascularly, (2) extravascularly, (3) by vessel puncture, and (4) externally. Additionally, the devices may be used in precision surgical cutting. 6 figs.

Krulevitch, P.A.; Lee, A.P.; Northrup, M.A.; Benett, W.J.

1999-07-27T23:59:59.000Z

418

Simulation in education and training  

Science Conference Proceedings (OSTI)

Historically, the use of simulation has been an important aspect of training in some fields (such as aviation). As the cost of computing power decreases simulation is now finding its way into training for other fields. As simulation moves into these ...

J. Peter Kincaid; Ken K. Westerlund

2009-12-01T23:59:59.000Z

419

PMCDP Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PMCDP Training PMCDP Training PMCDP Training To ensure all project certification applicants are provided the best resources for obtaining and maintaining their current level(s) of certification, the PMCDP has developed training courses that will help enhance the necessary project management skills needed to tackle the complex array of projects within the DOE portfolio. APM, at no cost to the participants, sponsors PMCDP training courses designed to provide specific knowledge, skills and abilities needed to satisfy specific competency requirements of the PMCDP. The PMCDP Course Catalog provides a more specific description of the 29 current PMCDP courses. The PMCDP Curriculum Map shows the different courses within the PMCDP curriculum for each level of PMCDP certification.

420

Surveillance Guides - Training Program Content  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAINING PROGRAM CONTENT TRAINING PROGRAM CONTENT 1.0 Objective The objective of this surveillance is to evaluate the effectiveness of the contractor's program for establishing the content of training programs. The process to be evaluated includes (1) determining the tasks individuals must perform; (2) specifying the required knowledge, skills, and abilities for performing tasks; (3) selecting knowledge skills and abilities for training; and (4) selecting appropriate training settings. The Facility Representative reviews records and interviews personnel to evaluate the effectiveness of the process. The Facility Representative evaluates compliance with DOE requirements and implementation of best practices. 2.0 References 2.1 DOE 5480.18A, Accreditation of Performance-Based

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

User_ApproveTrainingRequest  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Approving User Training Requests Approving User Training Requests © 2011 SuccessFactors, Inc. - 1 - SuccessFactors Learning Confidential. All rights reserved. Job Aid: Approving User Training Requests Purpose The purpose of this job aid is to guide users through the step-by-step process of approving a user training request. Task A. Approve a User Training Request From the Home Page, click the You have pending approval requests link in the Alerts box. The Pending Reviews and Approvals page displays and defaults open to the pending approval. Click the expand icon ( ) next to the user's name and/or click the Title link for additional information on the request. Select the Enter Reasons for Approvals or Denials checkbox to allow for comments. Select the Approve radio

422

Quality Assurance: Library and Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Quality Assurance Library/Training Quality Assurance Library/Training DOE Quality Assurance Criteria Review and Approach Document (CRAD) Management Assessment Tools Software Quality Assurance CRAD QA Program Document Examples: These QA Programs are available to serve as examples from three different types of DOE organizations. Management System for Quality and Safety Management EM HQ DOE-ID DOE Nuclear Safety QA Regulation Enforcement Guide: DOE Enforcement Program Roles and Responsibilities Training, Qualification, and Orientation Materials: See also SQA Training U.S. Nuclear QA Principles, Practices and Requirements - Part I (August 2005) U.S. Nuclear QA Principles, Practices and Requirements - Part II-A Tutorial (August 2005) Suspect/Counterfeit Items Training Materials DOE-STD-1150-2002, Quality Assurance Functional Area Qualification Standard

423

APS USER TRAINING HISTORY Background  

NLE Websites -- All DOE Office Websites (Extended Search)

USER TRAINING HISTORY USER TRAINING HISTORY Background The User Program Division Director has delegated to the CATs the authority to authorize the conduct of experiments because the CATs have accepted responsibility for: * identifying and evaluating the hazards posed by the experiment, * specifying controls appropriate to the hazards, and * verifying that controls are in place. One form of hazard control frequently made mandatory by law and laboratory policy is worker knowledge. The accepted means of verifying that a worker has the required knowledge is ensuring that the worker has completed appropriate training. With CAT input, the APS has developed the APS User Training History. This web-based tool enables designated CAT personnel to examine data characterizing ES&H training courses

424

Training Evaluations | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Evaluations Evaluations Training Evaluations The Office of Learning and Workforce Development (HC-20) is working to find ways to measure the effectiveness and efficiency of our training solutions. This effort is to ensure that DOE is in compliance with 2009 OPM regulations, which require that agencies evaluate their training programs annually to determine their effectiveness (5 CFR 410.202). Our goal is to demonstrate the contribution of training to agency mission effectiveness, increase partnership with our key stakeholders and show clear connections between effective funding usage and agency outcomes. In order to accomplish this we have created a comprehensive strategy and standards for evaluating training that will demonstrate alignment between the learning experience

425

Energy Efficiency Services Sector: Workforce Education and Training Needs  

E-Print Network (OSTI)

Education and Training Programs 33 4.1 EnergyEfficiency Education and Training ProgramTraining Programs..

Goldman, Charles A.

2010-01-01T23:59:59.000Z

426

PIA - Savannah River Nuclear Solutions Training Records and Informatio...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Records and Information Network (TRAIN) PIA - Savannah River Nuclear Solutions Training Records and Information Network (TRAIN) PIA - Savannah River Nuclear Solutions...

427

PIA - Savannah River Nuclear Solutions Training Records and Informatio...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

PIA - Savannah River Nuclear Solutions Training Records and Information Network (TRAIN) PIA - Savannah River Nuclear Solutions Training Records and Information Network (TRAIN) PIA...

428

Microsoft PowerPoint - IGCA Training 2011-OPAM | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

IGCA Training 2011-OPAM Microsoft PowerPoint - IGCA Training 2011-OPAM IGCA Inventory Data Collection Tool Training 2011 Microsoft PowerPoint - IGCA Training 2011-OPAM More...

429

Training Program EOC0012 Consequence Assessment Team Training  

NLE Websites -- All DOE Office Websites (Extended Search)

12 12 Consequence Assessment Team Training COURSE SYLLABUS Subject Category: Emergency Operations Schedule: N/A (online) Course Length: Approximately 1 hour Medical Approval: None Delivery Method: Online - offered through the Emergency Operations Training Academy (EOTA) http://eota.doeal.gov/ Location: N/A (online) Course Prerequisite: None Retraining/Recertification: Annually recommended Course Purpose: Designed as an orientation for members of the Emergency Operations Center (EOC) Consequence Assessment team who would be called upon to provide Hazard and Consequence and Meteorological data to assist in planning and response efforts. Course Objectives: The goal of this training is to serve as an orientation to consequence assessment. Students will identify the objectives

430

Integrated Training Management | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Integrated Training Management Integrated Training Management Integrated Training Management Integrated Training Management Each DOE element must have a training policy and procedure that establishes an integrated cycle of organizational needs analysis, training planning, and resource allocation. Training funding must be included in budget submissions; the training needs must be prioritized, and resources allocated accordingly. Each DOE element must also complete an annual training summary, reporting training objectives, cost and actual training conducted each fiscal year. Annually, the Integrated Training Management (ITM) process is used to assist in gathering information critical for the development of each DOE element's Mission Critical Skills, Other Needs(Non-Mission Critical Skills), Leadership Development Programs, and General Competencies. The ITM

431

TRAIN-PIA.pdf | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAIN-PIA.pdf TRAIN-PIA.pdf TRAIN-PIA.pdf More Documents & Publications PIA - INL SECURITY INFORMATION MANAGEMENT SYSTEM BUSINESS ENCLAVE PIA - INL PeopleSoft - Human Resource...

432

Environment/Health/Safety (EHS) Training: Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Staff James Basore: EHSS Training Manager, JDBasore@lbl.gov (510) 486-7524 Carmen Ayala: EHSS Training Program Assistant, CAyala@lbl.gov (510-495-2228) Fax (510) 486-2384...

433

Training | BNL Guest, User and Visitor Center  

NLE Websites -- All DOE Office Websites (Extended Search)

Training A valid BNL guest number is needed for training. Return users, you may check your training status on-line to see which courses you need to complete again. System...

434

New User Training, Tuesday June 7  

NLE Websites -- All DOE Office Websites (Extended Search)

User Training, Tuesday June 7 New User Training, Tuesday June 7 May 27, 2011 by Francesca Verdier NERSC will present a two-hour "Getting Started at NERSC" training event aimed at...

435

Temperature differential detection device  

DOE Patents (OSTI)

A temperature differential detection device for detecting the temperature differential between predetermined portions of a container wall is disclosed as comprising a Wheatstone bridge circuit for detecting resistance imbalance with a first circuit branch having a first elongated wire element mounted in thermal contact with a predetermined portion of the container wall, a second circuit branch having a second elongated wire element mounted in thermal contact with a second predetermined portion of a container wall with the wire elements having a predetermined temperature-resistant coefficient, an indicator interconnected between the first and second branches remote from the container wall for detecting and indicating resistance imbalance between the first and second wire elements, and connector leads for electrically connecting the wire elements to the remote indicator in order to maintain the respective resistance value relationship between the first and second wire elements. The indicator is calibrated to indicate the detected resistance imbalance in terms of a temperature differential between the first and second wall portions.

Girling, Peter M. (Allentown, PA)

1986-01-01T23:59:59.000Z

436

Temperature differential detection device  

DOE Patents (OSTI)

A temperature differential detection device for detecting the temperature differential between predetermined portions of a container wall is disclosed as comprising a Wheatstone bridge circuit for detecting resistance imbalance with a first circuit branch having a first elongated wire element mounted in thermal contact with a predetermined portion of the container wall, a second circuit branch having a second elongated wire element mounted in thermal contact with a second predetermined portion of a container wall with the wire elements having a predetermined temperature-resistant coefficient, an indicator interconnected between the first and second branches remote from the container wall for detecting and indicating resistance imbalance between the first and second wire elements, and connector leads for electrically connecting the wire elements to the remote indicator in order to maintain the respective resistance value relationship between the first and second wire elements. The indicator is calibrated to indicate the detected resistance imbalance in terms of a temperature differential between the first and second wall portions. 2 figs.

Girling, P.M.

1986-04-22T23:59:59.000Z

437

NETL: Pressure Swing Absorption Device  

NLE Websites -- All DOE Office Websites (Extended Search)

Pressure Swing Absorption Device and Process for Separating CO2 from Shifted Syngas and its Capture for Subsequent Storage Pressure Swing Absorption Device and Process for Separating CO2 from Shifted Syngas and its Capture for Subsequent Storage Project No.: DE-FE0001323 New Jersey Institute of Technology is developing an advanced pressure swing absorption-based (PSAB) device via laboratory-based experiments. The device will be used to accomplish a cyclic process to process low temperature post-shift-reactor synthesis gas resulting from the gasification process into purified hydrogen at high pressure for use by the combustion turbine of an integrated gasification combined cycle (IGCC) plant. The overall goal of the proposed work is to develop an advanced PSAB device and cyclic process for use in a coal-fired IGCC plant to produce purified hydrogen at high pressure and a highly purified CO2 stream suitable for use or sequestration.

438

Automatic Mechetronic Wheel Light Device  

SciTech Connect

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

439

Automatic Mechetronic Wheel Light Device  

DOE Patents (OSTI)

A wheel lighting device for illuminating a wheel of a vehicle to increase safety and enhance aesthetics. The device produces the appearance of a "ring of light" on a vehicle's wheels as the vehicle moves. The "ring of light" can automatically change in color and/or brightness according to a vehicle's speed, acceleration, jerk, selection of transmission gears, and/or engine speed. The device provides auxiliary indicator lights by producing light in conjunction with a vehicle's turn signals, hazard lights, alarm systems, and etc. The device comprises a combination of mechanical and electronic components and can be placed on the outer or inner surface of a wheel or made integral to a wheel or wheel cover. The device can be configured for all vehicle types, and is electrically powered by a vehicle's electrical system and/or battery.

Khan, Mohammed John Fitzgerald (Silver Spring, MD)

2004-09-14T23:59:59.000Z

440

Training and Turnover in Organizations  

E-Print Network (OSTI)

We present a two-level model of organizational training and agent production. Managers decide whether or not to train based on both the costs of training compared to the benefits and on their expectations and observations of the number of other firms that also train. Managers also take into account the sum of their employees' contributions and the average tenure length within their organization. Employees decide whether or not to contribute to production based on their expectations as to how other employees will act. Trained workers learn over time and fold their increased productivity into their decision whether or not to contribute. We find that the dynamical behavior at the two levels is closely coupled: the evolution of the industry over time depends not only on the characteristics of training programs, learning curves, and cost-benefit analyses, but on the vagaries of chance as well. For example, in one case, the double dilemma can be resolved for the industry as a whole and productivity then increases steadily over time. In another, the organizational level dilemma may remain unresolved and workers may contribute at fluctuating levels. In this case the overall productivity stays low. We also find a correlation between high productivity and low turnover and show that a small increase in training rates can lead to explosive growth in productivity.

Natalie S. Glance; Tad Hogg; Bernardo A. Huberman

1994-02-08T23:59:59.000Z

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Training and Medical Training Issues Topic Group Meeting Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Medical Training Issues Topic Group Meeting Summary and Medical Training Issues Topic Group Meeting Summary Philadelphia, PA July 13, 1999 Fire Chief Bill Ruting (La Grange, IL, Fire Department) presented the results of the topic group's discussions: The MERRTT (Modular Emergency Response Radiological Transportation Training) series, comprised of 16 modules, is in the process of being finalized and pilot tested in a number of locations in the U.S. Pilot testing will include: using a needs assessment tool; developing model procedures; and actual training delivery of the MERRTT modules. The topic group, working with the regional government group staff representatives to TEC/WG, has sent a survey to State points-of-contact

442

Hanford general employee training: Computer-based training instructor's manual  

Science Conference Proceedings (OSTI)

The Computer-Based Training portion of the Hanford General Employee Training course is designed to be used in a classroom setting with a live instructor. Future references to this course'' refer only to the computer-based portion of the whole. This course covers the basic Safety, Security, and Quality issues that pertain to all employees of Westinghouse Hanford Company. The topics that are covered were taken from the recommendations and requirements for General Employee Training as set forth by the Institute of Nuclear Power Operations (INPO) in INPO 87-004, Guidelines for General Employee Training, applicable US Department of Energy orders, and Westinghouse Hanford Company procedures and policy. Besides presenting fundamental concepts, this course also contains information on resources that are available to assist students. It does this using Interactive Videodisk technology, which combines computer-generated text and graphics with audio and video provided by a videodisk player.

Not Available

1990-10-01T23:59:59.000Z

443

Meteorological Education and Training Using A-Train Profilers  

Science Conference Proceedings (OSTI)

NASA A-Train vertical profilers provide detailed observations of atmospheric features not seen in traditional imagery from other weather satellite data. CloudSat and CloudAerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) profiles ...

Thomas F. Lee; Richard L. Bankert; Cristian Mitrescu

2012-05-01T23:59:59.000Z

444

TEPP Training - Modular Emergency Response Radiological Transportation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Services » Waste Management » Packaging and Transportation » Services » Waste Management » Packaging and Transportation » Transportation Emergency Preparedness Program » TEPP Training - Modular Emergency Response Radiological Transportation Training (MERRTT) TEPP Training - Modular Emergency Response Radiological Transportation Training (MERRTT) Once the jurisdiction has completed an evaluation of their plans and procedures, they will need to address any gaps in training. To assist, TEPP has developed the Modular Emergency Response Radiological Transportation Training (MERRTT) program. MERRTT provides fundamental knowledge for responding to transportation incidents involving radiological material and builds on training in existing hazardous materials curricula. MERRTT satisfies the training requirements outlined in the Waste Isolation Pilot

445

Clean Cities: Electric Vehicle Infrastructure Training Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Electric Vehicle Infrastructure Electric Vehicle Infrastructure Training Program to someone by E-mail Share Clean Cities: Electric Vehicle Infrastructure Training Program on Facebook Tweet about Clean Cities: Electric Vehicle Infrastructure Training Program on Twitter Bookmark Clean Cities: Electric Vehicle Infrastructure Training Program on Google Bookmark Clean Cities: Electric Vehicle Infrastructure Training Program on Delicious Rank Clean Cities: Electric Vehicle Infrastructure Training Program on Digg Find More places to share Clean Cities: Electric Vehicle Infrastructure Training Program on AddThis.com... Goals & Accomplishments Partnerships National Clean Fleets Partnership National Parks Initiative Electric Vehicle Infrastructure Training Program Advanced Vehicle Technology Competitions

446

Readiness Review Training - Member | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Member Member Readiness Review Training - Member November 10, 2010 Readiness Review Member Training at the Idaho National Laboratory Course provides tools and tips to be an effective readiness review team member. Topics include: An understanding of the background behind the Readiness Review Process; Training in the mechanics of performance and reporting of a Readiness Review; Knowledge of current DOE Orders, Directives, and References for the Readiness Review process; Training in Performance-Based Assessment Processes and Official DOE Team Member Readiness Review Training Methods Readiness Review Training - Member More Documents & Publications Readiness Review Training - Team Leader Readiness Review Training - Development of Criteria And Review Approach Documents

447

Idaho Chemical Processing Plant training program  

SciTech Connect

Objectives, regulations and requirements, training methods, certification and recertification, progression and incentives, and coverage of the ICPP operator training program are discussed in detail. (LK)

1975-01-01T23:59:59.000Z

448

TQP Qualifying Official Training Approaches - NNSA Production...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TQP Qualifying Official Training Approaches - NNSA Production Office TQP Qualifying Official Training Approaches - NNSA Production Office A QO is an individual who has the...

449

NNSA Conducts Radiological Response Training in Kazakhstan |...  

National Nuclear Security Administration (NNSA)

(I-RAPTER) training in Almaty, Kazakhstan. The training, held at the Institute of Nuclear Physics in Almaty, included using radiation detection equipment to locate hidden...

450

Training Reciprocity Achieves Greater Consistency, Saves Time...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training Reciprocity Achieves Greater Consistency, Saves Time and Money for Idaho, Other DOE Sites Training Reciprocity Achieves Greater Consistency, Saves Time and Money for...

451

Request for Training Exemption/Waiver Form  

NLE Websites -- All DOE Office Websites (Extended Search)

Modified for use by Photon Sciences Effective 06282013 Photon Sciences Request for Training Reciprocity Form For General Employee Radiological Training (GERT) Individuals may be...

452

Optimization Online - The Freight Train Routing Problem  

E-Print Network (OSTI)

Jul 21, 2013 ... Abstract: We consider the following freight train routing problem (FTRP). Given is a transportation network with fixed routes for passenger trains...

453

Job Training Assistance Programs (Tennessee) | Department of...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Sites Power Marketing Administration Other Agencies You are here Home Savings Job Training Assistance Programs (Tennessee) Job Training Assistance Programs (Tennessee)...

454

Training & Outreach | Argonne Leadership Computing Facility  

NLE Websites -- All DOE Office Websites (Extended Search)

User Services User Support Machine Status Presentations Training & Outreach Getting Started Videoconference Data Management Webinar Argonne Training Program on Extreme-Scale...

455

Training and Pensions: Substitutes or Complements?  

E-Print Network (OSTI)

1991. Joint-Training Programs: a Union-Management Approachtraining received previous to the current job, whether the training was through a joint labor- management program,

Ghilarducci, Teresa; Reich, Michael

1998-01-01T23:59:59.000Z

456

Radiological Worker Training - Radiological Contamination Control...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

B December 2008 DOE HANDBOOK RADIOLOGICAL WORKER TRAINING RADIOLOGICAL CONTAMINATION CONTROL TRAINING FOR LABORATORY RESEARCH U.S. Department of Energy FSC 6910 Washington, D.C....

457

Specialized Training | Y-12 National Security Complex  

NLE Websites -- All DOE Office Websites (Extended Search)

Specialized Training Specialized Training The Nuclear Materials Production and Processes course provides classroom instruction led by subject matter experts and includes ongoing...

458

NETL - ARRA Training Centers Course Calendar  

NLE Websites -- All DOE Office Websites (Extended Search)

ARRA Training Centers Course Calendar The Regional Carbon Sequestration Training Centers, funded by the American Recovery and Reinvestment Act of 2009 (ARRA), support the...

459

Federal Energy Management Program: Renewable Energy Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Training to someone by E-mail Share Federal Energy Management Program: Renewable Energy Training on Facebook Tweet about Federal Energy Management Program: Renewable Energy...

460

Workforce Development Training Program (South Dakota) | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Other Agencies You are here Home Savings Workforce Development Training Program (South Dakota) Workforce Development Training Program (South Dakota) Eligibility Commercial...

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

Training Worksheet Job Aid - Sandia National Laboratories  

Emergency Preparedness Hazardous Materials Technician Training Generic EMG103G OSHA Health & Safety Basic Training-General Worker Generic ENV100G

462

Operational health physics training  

SciTech Connect

The initial four sections treat basic information concerning atomic structure and other useful physical quantities, natural radioactivity, the properties of {alpha}, {beta}, {gamma}, x rays and neutrons, and the concepts and units of radiation dosimetry (including SI units). Section 5 deals with biological effects and the risks associated with radiation exposure. Background radiation and man-made sources are discussed next. The basic recommendations of the ICRP concerning dose limitations: justification, optimization (ALARA concepts and applications) and dose limits are covered in Section seven. Section eight is an expanded version of shielding, and the internal dosimetry discussion has been extensively revised to reflect the concepts contained in the MIRD methodology and ICRP 30. The remaining sections discuss the operational health physics approach to monitoring radiation. Individual sections include radiation detection principles, instrument operation and counting statistics, health physics instruments and personnel monitoring devices. The last five sections deal with the nature of, operation principles of, health physics aspects of, and monitoring approaches to air sampling, reactors, nuclear safety, gloveboxes and hot cells, accelerators and x ray sources. Decontamination, waste disposal and transportation of radionuclides are added topics. Several appendices containing constants, symbols, selected mathematical topics, and the Chart of the Nuclides, and an index have been included.

NONE

1992-06-01T23:59:59.000Z

463

A new gap separation mechanism for APS insertion devices.  

SciTech Connect

A new gap separation mechanism for use with the standard Advanced Photon Source (APS) 3.3-cm-period undulator magnetic structures has been designed and built and the first system has been installed in the APS storage ring. The system allows a minimum magnetic gap of 10 mm for use with the APS 8-mm insertion device vacuum chambers. The mechanism is a bolted steel frame structure with a simple 4-motor mechanical drive train. The control system uses servomotors with incremental rotary encoders and virtual absolute linear encoders.

Trakhtenberg, E. M.; Tcheskidov, V.; Den Hartog, P. K.; Deriy, B.; Erdmann, M.; Makarov, O.; Moog, E. R.

1999-10-25T23:59:59.000Z

464

Plain Language Training Class 01  

Energy.gov (U.S. Department of Energy (DOE))

Registration link: CHRIS https://mis.doe.gov/ess/index.cfm 002357/0017 and https://powerpedia.energy.gov/wiki/Plain_Writing_Training_Class_October_...Course Type: ClassroomCourse Location:...

465

Lean Six-Sigma Training  

NLE Websites -- All DOE Office Websites (Extended Search)

Presentation Summary Presentation Summary *White Belt Training *What is Lean? *What is Six Sigma? *What Is Lean Six Sigma *What Is Lean Six Sigma *Case Study *DMAIC * Next Steps...

466

Efficient high density train operations  

DOE Patents (OSTI)

The present invention provides methods for preventing low train voltages and managing interference, thereby improving the efficiency, reliability, and passenger comfort associated with commuter trains. An algorithm implementing neural network technology is used to predict low voltages before they occur. Once voltages are predicted, then multiple trains can be controlled to prevent low voltage events. Further, algorithms for managing inference are presented in the present invention. Different types of interference problems are addressed in the present invention such as "Interference. During Acceleration", "Interference Near Station Stops", and "Interference During Delay Recovery." Managing such interference avoids unnecessary brake/acceleration cycles during acceleration, immediately before station stops, and after substantial delays. Algorithms are demonstrated to avoid oscillatory brake/acceleration cycles due to interference and to smooth the trajectories of closely following trains. This is achieved by maintaining sufficient following distances to avoid unnecessary braking/accelerating. These methods generate smooth train trajectories, making for a more comfortable ride, and improve train motor reliability by avoiding unnecessary mode-changes between propulsion and braking. These algorithms can also have a favorable impact on traction power system requirements and energy consumption.

Gordon, Susanna P. (Oakland, CA); Evans, John A. (Hayward, CA)

2001-01-01T23:59:59.000Z

467

Alternative systematic approaches to training  

SciTech Connect

This handbook is approved for use by all DOE Components and contractors. The handbook was prepared primarily for DOE nuclear facilities, but the information can be effectively used by any other type of facility. DOE nuclear, DOE non-nuclear, commercial nuclear reactor, fuel fabrication, chemical processing, or other types of facilities may also apply the principles of this approach and find it useful and applicable to local needs. The handbook provides DOE and contractor operating organizations with concepts and guidance regarding the use of alternative techniques to implement a systematic approach to training (SAT). The techniques described in this handbook are endorsed by DOE and use of the guidance in this handbook is appropriate for establishment of technical training programs at DOE nuclear facilities. The use of guidance on selection and implementation of appropriate training approaches after consideration of job complexity, the consequences of error based on risk/hazard potential, and available training media should result in effective and efficient training programs. The information presented in this handbook can be used to grade the level of effort and formality used in developing training programs.

1995-01-01T23:59:59.000Z

468

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture  

SciTech Connect

Wireless device monitoring methods, wireless device monitoring systems, and articles of manufacture are described. According to one embodiment, a wireless device monitoring method includes accessing device configuration information of a wireless device present at a secure area, wherein the device configuration information comprises information regarding a configuration of the wireless device, accessing stored information corresponding to the wireless device, wherein the stored information comprises information regarding the configuration of the wireless device, comparing the device configuration information with the stored information, and indicating the wireless device as one of authorized and unauthorized for presence at the secure area using the comparing.

McCown, Steven H. (Rigby, ID); Derr, Kurt W. (Idaho Falls, ID); Rohde, Kenneth W. (Idaho Falls, ID)

2012-05-08T23:59:59.000Z

469

Biomedical devices from ultraviolet LEDs  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomedical devices from ultraviolet LEDs Biomedical devices from ultraviolet LEDs Light-emitting nanocrystal diodes go ultraviolet Biomedical devices with active components could be made from nanostructured systems. February 24, 2012 Researcher working with nanocrystals A researcher at LANL works with nanocrystals. Get Expertise Researcher Sergio Brovelli Physical Chem & Applied Spectroscopy Email Research Team Leader Alberto Paleari University of Milano-Bicocca in Italy Such devices could, for example, selectively activate light-sensitive drugs for better medical treatment or probe for the presence of fluorescent markers in medical diagnostics. LEDs produce light in the ultraviolet range A process for creating glass-based, inorganic light-emitting diodes (LEDs) that produce light in the ultraviolet range has been developed by a

470

Device-transparent personal storage  

E-Print Network (OSTI)

Users increasingly store data collections such as digital photographs on multiple personal devices, each of which typically presents the user with a storage management interface isolated from the contents of all other ...

Strauss, Jacob A. (Jacob Alo), 1979-

2010-01-01T23:59:59.000Z

471

Polymer electronic devices and materials.  

Science Conference Proceedings (OSTI)

Polymer electronic devices and materials have vast potential for future microsystems and could have many advantages over conventional inorganic semiconductor based systems, including ease of manufacturing, cost, weight, flexibility, and the ability to integrate a wide variety of functions on a single platform. Starting materials and substrates are relatively inexpensive and amenable to mass manufacturing methods. This project attempted to plant the seeds for a new core competency in polymer electronics at Sandia National Laboratories. As part of this effort a wide variety of polymer components and devices, ranging from simple resistors to infrared sensitive devices, were fabricated and characterized. Ink jet printing capabilities were established. In addition to promising results on prototype devices the project highlighted the directions where future investments must be made to establish a viable polymer electronics competency.

Schubert, William Kent; Baca, Paul Martin; Dirk, Shawn M.; Anderson, G. Ronald; Wheeler, David Roger

2006-01-01T23:59:59.000Z

472

Devices for collecting chemical compounds  

SciTech Connect

A device for sampling chemical compounds from fixed surfaces and related methods are disclosed. The device may include a vacuum source, a chamber and a sorbent material. The device may utilize vacuum extraction to volatilize the chemical compounds from a fixed surface so that they may be sorbed by the sorbent material. The sorbent material may then be analyzed using conventional thermal desorption/gas chromatography/mass spectrometry (TD/GC/MS) instrumentation to determine presence of the chemical compounds. The methods may include detecting release and presence of one or more chemical compounds and determining the efficacy of decontamination. The device may be useful in collection and analysis of a variety of chemical compounds, such as residual chemical warfare agents, chemical attribution signatures and toxic industrial chemicals.

Scott, Jill R; Groenewold, Gary S

2013-12-24T23:59:59.000Z

473

Optical and optoelectronic fiber devices  

E-Print Network (OSTI)

The ability to integrate materials with disparate electrical, thermal, and optical properties into a single fiber structure enabled the realization of fiber devices with diverse and complex functionalities. Amongst those, ...

Shapira, Ofer, Ph. D. Massachusetts Institute of Technology

2007-01-01T23:59:59.000Z

474

Training Program EHS 657 ~ Self-Transporting Hazardous Materials...  

NLE Websites -- All DOE Office Websites (Extended Search)

Environment, Health, & Safety Training Program EHS 657 Self-Transporting Hazardous Materials Training Course Syllabus...

475

Geometry effects of small MOSFET devices  

Science Conference Proceedings (OSTI)

The effects of diminishing MOS inversion channel length or width on device characteristics are discussed. As opposed to the geometric device size, an "electric device size" is established by normalizing all dimensions on an appropriately chosen depletion ...

F. H. Gaensslen

1979-11-01T23:59:59.000Z

476

Lih thermal energy storage device  

DOE Patents (OSTI)

A thermal energy storage device for use in a pulsed power supply to store waste heat produced in a high-power burst operation utilizes lithium hydride as the phase change thermal energy storage material. The device includes an outer container encapsulating the lithium hydride and an inner container supporting a hydrogen sorbing sponge material such as activated carbon. The inner container is in communication with the interior of the outer container to receive hydrogen dissociated from the lithium hydride at elevated temperatures.

Olszewski, Mitchell (Knoxville, TN); Morris, David G. (Knoxville, TN)

1994-01-01T23:59:59.000Z

477

Piezo-phototronic effect devices  

DOE Patents (OSTI)

A semiconducting device includes a piezoelectric structure that has a first end and an opposite second end. A first conductor is in electrical communication with the first end and a second conductor is in electrical communication with the second end so as to form an interface therebetween. A force applying structure is configured to maintain an amount of strain in the piezoelectric member sufficient to generate a desired electrical characteristic in the semiconducting device.

Wang, Zhong L.; Yang, Qing

2013-09-10T23:59:59.000Z

478

Developing a Training Program for Collection Managers  

E-Print Network (OSTI)

management Conclusion Essentially, the Task Force has reassessed and reorganized our training program

2002-01-01T23:59:59.000Z

479

Emergency Operations Training Academy | National Nuclear Security  

National Nuclear Security Administration (NNSA)

Operations Training Academy | National Nuclear Security Operations Training Academy | National Nuclear Security Administration Our Mission Managing the Stockpile Preventing Proliferation Powering the Nuclear Navy Emergency Response Recapitalizing Our Infrastructure Continuing Management Reform Countering Nuclear Terrorism About Us Our Programs Our History Who We Are Our Leadership Our Locations Budget Our Operations Media Room Congressional Testimony Fact Sheets Newsletters Press Releases Speeches Events Social Media Video Gallery Photo Gallery NNSA Archive Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog Emergency Operations Training Academy Home > About Us > Our Programs > Emergency Response > Training > Emergency Operations Training Academy Emergency Operations Training Academy Rotating image showing pictures of Classroom, Online and Hands on trainings

480

Climate VISION: Resources and Links - Training Sessions  

Office of Scientific and Technical Information (OSTI)

Training Sessions Training Sessions Department of Energy Training Sessions Compressed Air Systems Training Sessions Fan System Training Sessions Motor System Training Sessions Process Heating Training Sessions Pump System Training Sessions Steam System Training Sessions Compressed Air Systems Training Sessions Fundamentals of Compressed Air Systems - 1-day workshop Find out how a compressed air system works and the benefits of optimal compressed air system performance. This initial class demonstrates how to compute the current cost of your plant's compressed air systems, how to measure and create a baseline of system performance, and how to determine the impact of different compressor control types. Learn basic approaches for cutting costs; identify steps for proper system operation, maintenance,

Note: This page contains sample records for the topic "training devices supervisors" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

Federal Energy Management Program: FEMP Training Webcasts  

NLE Websites -- All DOE Office Websites (Extended Search)

FEMP Training FEMP Training Webcasts to someone by E-mail Share Federal Energy Management Program: FEMP Training Webcasts on Facebook Tweet about Federal Energy Management Program: FEMP Training Webcasts on Twitter Bookmark Federal Energy Management Program: FEMP Training Webcasts on Google Bookmark Federal Energy Management Program: FEMP Training Webcasts on Delicious Rank Federal Energy Management Program: FEMP Training Webcasts on Digg Find More places to share Federal Energy Management Program: FEMP Training Webcasts on AddThis.com... Requirements by Subject Requirements by Regulation Notices & Rules Guidance Facility Reporting Fleet Reporting FEMP Training Webcasts The Federal Energy Management Program (FEMP) will be developing new training webcasts for Federal building energy efficiency standards and life

482

Medical Device Failure Analysis??Specific Materials  

Science Conference Proceedings (OSTI)

...ASM International, 2012, p 343??359ASM Handbook, Volume 23, Materials for Medical Devices,B.A. James, Medical Device Failure

483

Health IT Mobile Device Use Case Meeting  

Science Conference Proceedings (OSTI)

Health IT Mobile Device Use Case Meeting. Purpose: ... This meeting will address the Health IT project's first use case, Mobile Devices. ...

2013-04-16T23:59:59.000Z

484

Fluid Submersible Sensing Device - Energy Innovation Portal  

The present invention relates to a fluid submersible sensing device and, more particularly, to such a device having sensing structure provided within ...

485

Improved Gas Sampling Device - Available Technologies - PNNL  

Summary. This is an improved device for gas sampling and analysis in which the design of the device includes features for maximizing the surface area ...

486

Semiconductor-based, large-area, flexible, electronic devices  

SciTech Connect

Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

Goyal, Amit (Knoxville, TN)

2011-03-15T23:59:59.000Z

487

Training Program EHS ~ 244: Resistance Spot Welding Safety Training  

NLE Websites -- All DOE Office Websites (Extended Search)

4: Resistance Spot Welding Safety Training 4: Resistance Spot Welding Safety Training Course Syllabus Subject Category: Resistance Spot Welding Course Prerequisite: None Course Length: 25 minutes Medical Approval: No Delivery Mode: Web-Based Course Goal: Participants will be introduced to resistance spot welding processes, hazards, and safe work practices. Course Objectives: By the end of this course, you will be able to: * Identify resistance spot welding processes * Identify hazards, safe work practices, and personal protective equipment associated with resistance spot welding * Recognize the purpose of resistance spot welding schedules * Locate resistance spot welding schedule Subject Matter Expert: Joe Dionne x 7586 Training Compliance: 29 CFR 1910 Subparts O & Z, 29 CFR 1926 Subparts J & Z

488

Training Event: Performance on Edison  

NLE Websites -- All DOE Office Websites (Extended Search)

Using Hadoop for HPC Applications Using Hadoop for HPC Applications Getting Started at NERSC NERSC Intro for Environmental Energy Technologies Getting Started at NERSC Navigating NERSC File Systems Chemistry and Material Sciences Applications JGI Intro to NERSC Data Transfer and Archiving Using the Cray XE6 Joint NERSC/OLCF/NICS Cray XT5 Workshop NERSC User Group Training Remote Setup Online Tutorials Courses NERSC Training Accounts Request Form Training Links OSF HPC Seminiars Software Accounts & Allocations Policies Data Analytics & Visualization Data Management Policies Science Gateways User Surveys NERSC Users Group User Announcements Help Operations for: Passwords & Off-Hours Status 1-800-66-NERSC, option 1 or 510-486-6821 Account Support https://nim.nersc.gov accounts@nersc.gov 1-800-66-NERSC, option 2

489

Radiation-tolerant imaging device  

DOE Patents (OSTI)

A barrier at a uniform depth for an entire wafer is used to produce imaging devices less susceptible to noise pulses produced by the passage of ionizing radiation. The barrier prevents charge created in the bulk silicon of a CCD detector or a semiconductor logic or memory device from entering the collection volume of each pixel in the imaging device. The charge barrier is a physical barrier, a potential barrier, or a combination of both. The physical barrier is formed by an SiO.sub.2 insulator. The potential barrier is formed by increasing the concentration of majority carriers (holes) to combine with the electron's generated by the ionizing radiation. A manufacturer of CCD imaging devices can produce radiation-tolerant devices by merely changing the wafer type fed into his process stream from a standard wafer to one possessing a barrier beneath its surface, thus introducing a very small added cost to his production cost. An effective barrier type is an SiO.sub.2 layer.

Colella, Nicholas J. (Livermore, CA); Kimbrough, Joseph R. (Pleasanton, CA)

1996-01-01T23:59:59.000Z

490

Dual control active superconductive devices  

DOE Patents (OSTI)

A superconducting active device has dual control inputs and is constructed such that the output of the device is effectively a linear mix of the two input signals. The device is formed of a film of superconducting material on a substrate and has two main conduction channels, each of which includes a weak link region. A first control line extends adjacent to the weak link region in the first channel and a second control line extends adjacent to the weak link region in the second channel. The current flowing from the first channel flows through an internal control line which is also adjacent to the weak link region of the second channel. The weak link regions comprise small links of superconductor, separated by voids, through which the current flows in each channel. Current passed through the control lines causes magnetic flux vortices which propagate across the weak link regions and control the resistance of these regions. The output of the device taken across the input to the main channels and the output of the second main channel and the internal control line will constitute essentially a linear mix of the two input signals imposed on the two control lines. The device is especially suited to microwave applications since it has very low input capacitance, and is well suited to being formed of high temperature superconducting materials since all of the structures may be formed coplanar with one another on a substrate.

Martens, Jon S. (Albuquerque, NM); Beyer, James B. (Madison, WI); Nordman, James E. (Madison, WI); Hohenwarter, Gert K. G. (Madison, WI)

1993-07-20T23:59:59.000Z

491

Aerosol can waste disposal device  

DOE Patents (OSTI)

Disclosed is a device for removing gases and liquid from containers. The device punctures the bottom of a container for purposes of exhausting gases and liquid from the container without their escaping into the atmosphere. The device includes an inner cup or cylinder having a top portion with an open end for receiving a container and a bottom portion which may be fastened to a disposal or waste container in a substantially leak-proof manner. A piercing device is mounted in the lower portion of the inner cylinder for puncturing the can bottom placed in the inner cylinder. An outer cylinder having an open end and a closed end fits over the top portion of the inner cylinder in telescoping engagement. A force exerted on the closed end of the outer cylinder urges the bottom of a can in the inner cylinder into engagement with the piercing device in the bottom of the inner cylinder to form an opening in the can bottom, thereby permitting the contents of the can to enter the disposal container. 7 figures.

O' Brien, M.D.; Klapperick, R.L.; Bell, C.

1993-12-21T23:59:59.000Z

492

Bishop Paiute Weatherization Training Program  

SciTech Connect

The DOE Weatherization Training Grant assisted Native American trainees in developing weatherization competencies, creating employment opportunities for Bishop Paiute tribal members in a growing field. The trainees completed all the necessary training and certification requirements and delivered high-quality weatherization services on the Bishop Paiute Reservation. Six tribal members received all three certifications for weatherization; four of the trainees are currently employed. The public benefit includes (1) development of marketable skills by low-income Native individuals, (2) employment for low-income Native individuals in a growing industry, and (3) economic development opportunities that were previously not available to these individuals or the Tribe.

Carlos Hernandez

2010-01-28T23:59:59.000Z

493

Alternative Fuels Data Center: Propane Vehicle Training  

Alternative Fuels and Advanced Vehicles Data Center (EERE)

Propane Vehicle Propane Vehicle Training to someone by E-mail Share Alternative Fuels Data Center: Propane Vehicle Training on Facebook Tweet about Alternative Fuels Data Center: Propane Vehicle Training on Twitter Bookmark Alternative Fuels Data Center: Propane Vehicle Training on Google Bookmark Alternative Fuels Data Center: Propane Vehicle Training on Delicious Rank Alternative Fuels Data Center: Propane Vehicle Training on Digg Find More places to share Alternative Fuels Data Center: Propane Vehicle Training on AddThis.com... More in this section... Federal State Advanced Search All Laws & Incentives Sorted by Type Propane Vehicle Training The Railroad Commission of Texas Alternative Energy Division offers free safety and maintenance training on propane vehicles, buses, and forklifts.

494

Survey of hydrogen monitoring devices  

DOE Green Energy (OSTI)

Presented are results of a survey of commercially available monitoring devices suitable for hydrogen detection in the secondary containment vessel of a nuclear power plant during the post postulated accident period. Available detectors were grouped into the following five classes: combustion, solid state, electrochemical, thermal conductivity, and absorption. The performance of most available sensors is likely to deteriorate when exposed to the postulated conditions which include moisture, which could be at high temperature, and radioactive noncondensibles. Of the commercial devices, those using metallic filament thermal conductivity detectors seem least susceptible to performance change. Absorption detectors are best suited for this monitoring task but the only available device is designed for pipeline corrosion assessment. Initiation of experimental study to assess apparent deficiencies of commercial detectors is recommended. Also recommended is an analytical/experimental effort to determine the optimum detector array for monitoring in the secondary containment vessels.

Lai, W.

1981-01-01T23:59:59.000Z

495

Spectral utilization in thermophotovoltaic devices  

DOE Green Energy (OSTI)

Multilayer assemblies of epitaxially-grown, III-V semiconductor materials are being investigated for use in thermophotovoltaic (TPV) energy conversion applications. It has been observed that thick, highly-doped semiconductor layers within cell architectures dominate the parasitic free-carrier absorption (FCA) of devices at wavelengths above the bandgap of the semiconductor material. In this work, the wavelength-dependent, free-carrier absorption of p- and n-type InGaAs layers grown epitaxially onto semi-insulating (SI) InP substrates has been measured and related to the total absorption of long-wavelength photons in thermophotovoltaic devices. The optical responses of the TPV cells are then used in the calculation of spectral utilization factors and device efficiencies.

Clevenger, M.B.; Murray, C.S.

1997-12-31T23:59:59.000Z

496

Acoustic Inspection Devices: Detecting the Undetectable  

Acoustic Inspection Devices: Detecting the Undetectable Emerging homeland security threats and increasingly sophisticated adversaries have heightened ...

497

Training Program EOC-013 WebEOC Training COURSE SYLLABUS Subject...  

NLE Websites -- All DOE Office Websites (Extended Search)

Training Program EOC-013 WebEOC Training COURSE SYLLABUS Subject Category: Emergency Operations Schedule: Semi-Annually (or Upon Request) Course Length: 1 hour Medical...

498

Legacy Management Specific Training | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Legacy Management Specific Training Legacy Management Specific Training Legacy Management Specific Training Registration Information The following courses are specific to Legacy Management Employees, for more information about the courses below or to register for any of these courses please contact Chequita Johnson. Mandatory Training ECOMM, Environmental-Related External Communication (E-COMM) Tracking System GPP101, Management of Government Personal Property RM 102, Basic Records Management Training (DOE) Training at All LM Site Offices EC 100, Environmental Management System General Awareness (DOE) ER 200, Site Emergency Preparedness [All sites except Grand Junction] SC 105, Security Awareness Briefing Washington, DC HQ Mini Coop Briefing Fernald, OH FE110, Fernald Preserve Site Awareness Briefing

499

Overseas Corps Training Manual | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Overseas Corps Training Manual Overseas Corps Training Manual Overseas Corps Training Manual Purpose of Training Program under this Agreement The Department of Energy provides workforce resources to support the Department's mission and strategic plan objectives and requirements in overseas assignments. The individuals and their families carrying out these assignments need to be prepared to work with other Federal agencies, such as the Departments of State (DOS) and Defense (DOD), and with representatives of foreign governments, non-profit organizations, and commercial enterprises. Prior to the beginning, and while carrying out, the assignment, appropriate training will help ensure the achievement of the Departmental mission objectives. Overseas Corps Training Manual Responsible Contacts

500

Classification Training Institute | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Classification Training Institute Classification Training Institute Classification Training Institute Welcome to the Classification Training Institute (CTI) Webpage. This page provides information for Department of Energy (DOE) and non-DOE personnel concerning courses offered by the CTI, the current course schedule, and provides training and resources (reference materials and links to web pages with additional information) concerning information classified and controlled information within the DOE. This page also contains short animated lessons. If you need a quick refresher on an aspect of classified or controlled information, refer to the section "Online Mini-Lessons" below. Additional lessons are being developed. The training materials provided on this page are for information only. If