National Library of Energy BETA

Sample records for toyota camry hybrid

  1. 2007 Toyota Camry-6330 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity (AVTA) conducts several different types of tests on hybrid electric vehicles (HEVs), including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Camry hybrid electric vehicle (Vin Number JTNBB46K673006330). Testing was performed by the Electric Transportation Engineering Corporation. The AVTA is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct AVTA for the U.S. Department of Energy.

  2. 2007 Toyota Camry-7129 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Camry hybrid electric vehicle (Vin Number JTNBB46K773007129). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  3. Evaluation of the 2007 Toyota Camry Hybrid Synergy Drive System

    SciTech Connect (OSTI)

    Burress, T A; Coomer, C L; Campbell, S L; Seiber, L E; Marlino, L D; Staunton, R H; Cunningham, J P

    2008-04-15

    The U.S. Department of Energy (DOE) and American automotive manufacturers General Motors, Ford, and DaimlerChrysler began a five-year, cost-shared partnership in 1993. Currently, hybrid electric vehicle (HEV) research and development is conducted by DOE through its FreedomCAR and Vehicle Technologies (FCVT) program. The mission of the FCVT program is to develop more energy efficient and environmentally friendly highway transportation technologies. Program activities include research, development, demonstration, testing, technology validation, and technology transfer. These activities are aimed at developing technologies that can be domestically produced in a clean and cost-competitive manner. Under the FCVT program, support is provided through a three-phase approach [1] which is intended to: • Identify overall propulsion and vehicle-related needs by analyzing programmatic goals and reviewing industry’s recommendations and requirements, then develop the appropriate technical targets for systems, subsystems, and component research and development activities; • Develop and validate individual subsystems and components, including electric motors, emission control devices, battery systems, power electronics, accessories, and devices to reduce parasitic losses; and • Determine how well the components and subassemblies work together in a vehicle environment or as a complete propulsion system and whether the efficiency and performance targets at the vehicle level have been achieved. The research performed in this area will help remove technical and cost barriers to enable technology for use in such advanced vehicles as hybrid electric, plug-in hybrid electric, electric, and fuel-cell-powered vehicles.

  4. Technology and Cost of the Model Year (MY) 2007 Toyota Camry HEV Final Report

    SciTech Connect (OSTI)

    None

    2007-09-30

    The Oak Ridge National Laboratory (ORNL) provides research and development (R&D) support to the Department of Energy on issues related to the cost and performance of hybrid vehicles. ORNL frequently benchmarks its own research against commercially available hybrid components currently used in the market. In 2005 we completed a detailed review of the cost of the second generation Prius hybrid. This study examines the new 2007 Camry hybrid model for changes in technology and cost relative to the Prius. The work effort involved a detailed review of the Camry hybrid and the system control strategy to identify the hybrid components used in the drive train. Section 2 provides this review while Section 3 presents our detailed evaluation of the specific drive train components and their cost estimates. Section 3 also provides a summary of the total electrical drive train cost for the Camry hybrid vehicle and contrasts these estimates to the costs for the second generation Prius that we estimated in 2005. Most of the information on cost and performance were derived from meetings with the technical staff of Toyota, Nissan, and some key Tier I suppliers like Hitachi and Panasonic Electric Vehicle Energy (PEVE) and we thank these companies for their kind cooperation.

  5. Technology and Cost of the MY 2007 toyota Camry HEV -- A Subcontract Report

    SciTech Connect (OSTI)

    Marlino, Laura D [ORNL

    2007-09-01

    The Oak Ridge National Laboratory (ORNL) provides research and development (R&D) support to the Department of Energy on issues related to the cost and performance of hybrid vehicles. ORNL frequently benchmarks its own research against commercially available hybrid components currently used in the market. In 2005 we completed a detailed review of the cost of the second generation Prius hybrid. This study examines the new 2007 Camry hybrid model for changes in technology and cost relative to the Prius. The work effort involved a detailed review of the Camry hybrid and the system control strategy to identify the hybrid components used in the drive train. Section 2 provides this review while Section 3 presents our detailed evaluation of the specific drive train components and their cost estimates. Section 3 also provides a summary of the total electrical drive train cost for the Camry hybrid vehicle and contrasts these estimates to the costs for the second generation Prius that we estimated in 2005. Most of the information on cost and performance were derived from meetings with the technical staff of Toyota, Nissan, and some key Tier I suppliers like Hitachi and Panasonic Electric Vehicle Energy (PEVE) and we thank these companies for their kind cooperation.

  6. 2006 Toyota Highlander-5681 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Highlander hybrid electric vehicle (Vin Number JTEDW21A860005681). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  7. Evaluation of the 2010 Toyota Prius Hybrid Synergy Drive System

    SciTech Connect (OSTI)

    Burress, Timothy A; Campbell, Steven L; Coomer, Chester; Ayers, Curtis William; Wereszczak, Andrew A; Cunningham, Joseph Philip; Marlino, Laura D; Seiber, Larry Eugene; Lin, Hua-Tay

    2011-03-01

    Subsystems of the 2010 Toyota Prius hybrid electric vehicle (HEV) were studied and tested as part of an intensive benchmarking effort carried out to produce detailed information concerning the current state of nondomestic alternative vehicle technologies. Feedback provided by benchmarking efforts is particularly useful to partners of the Vehicle Technologies collaborative research program as it is essential in establishing reasonable yet challenging programmatic goals which facilitate development of competitive technologies. The competitive nature set forth by the Vehicle Technologies Program (VTP) not only promotes energy independence and economic stability, it also advocates the advancement of alternative vehicle technologies in an overall global perspective. These technologies greatly facilitate the potential to reduce dependency on depleting natural resources and mitigate harmful impacts of transportation upon the environment.

  8. Evaluation of 2004 Toyota Prius Hybrid Electric Drive System

    SciTech Connect (OSTI)

    Staunton, R.H.; Ayers, C.W.; Chiasson, J.N.; Burress, B.A.; Marlino, L.D.

    2006-05-01

    The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE)-Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

  9. Evaluation of 2004 Toyota Prius Hybrid Electric Drive System

    SciTech Connect (OSTI)

    Staunton, Robert H; Ayers, Curtis William; Chiasson, J. N.; Burress, Timothy A; Marlino, Laura D

    2006-05-01

    The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery- and generator-powered electric motor. Both of these motive-power sources are capable of providing mechanical-drive power for the vehicle. The engine can deliver a peak-power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak-power output of 50 kW over the speed range of 1200-1540 rpm. Together, this engine-motor combination has a specified peak-power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. To acquire knowledge and thereby improve understanding of the propulsion technology used in the 2004 Prius, a full range of design characterization studies were conducted to evaluate the electrical and mechanical characteristics of the 2004 Prius and its hybrid electric drive system. These characterization studies included (1) a design review, (2) a packaging and fabrication assessment, (3) bench-top electrical tests, (4) back-electromotive force (emf) and locked rotor tests, (5) loss tests, (6) thermal tests at elevated temperatures, and most recently (7) full-design-range performance testing in a controlled laboratory environment. This final test effectively mapped the electrical and thermal results for motor/inverter operation over the full range of speeds and shaft loads that these assemblies are designed for in the Prius vehicle operations. This testing was undertaken by the Oak Ridge National Laboratory (ORNL) as part of the U.S. Department of Energy (DOE) - Energy Efficiency and Renewable Energy (EERE) FreedomCAR and Vehicle Technologies (FCVT) program through its vehicle systems technologies subprogram. The thermal tests at elevated temperatures were conducted late in 2004, and this report does not discuss this testing in detail. The thermal tests explored the derating of the Prius motor design if operated at temperatures as high as is normally encountered in a vehicle engine. The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. A separate, comprehensive report on this thermal control study is available [1].

  10. Double Planetary Gear (PG) power-split hybrid powertrains have been used in production vehicles from Toyota

    E-Print Network [OSTI]

    Peng, Huei

    ABSTRACT Double Planetary Gear (PG) power-split hybrid powertrains have been used in production are power-split type [3], which utilizes one or more planetary gears as the transmission device. Toyota Prius, Ford Fusion and Chevrolet Volt are all power-split hybrid vehicles. The planetary gears

  11. Evaluation of 2004 Toyota Prius Hybrid Electric Drive System Interim Report

    SciTech Connect (OSTI)

    Ayers, C.W.

    2004-11-23

    Laboratory tests were conducted to evaluate the electrical and mechanical performance of the 2004 Toyota Prius and its hybrid electric drive system. As a hybrid vehicle, the 2004 Prius uses both a gasoline-powered internal combustion engine and a battery-powered electric motor as motive power sources. Innovative algorithms for combining these two power sources results in improved fuel efficiency and reduced emissions compared to traditional automobiles. Initial objectives of the laboratory tests were to measure motor and generator back-electromotive force (emf) voltages and determine gearbox-related power losses over a specified range of shaft speeds and lubricating oil temperatures. Follow-on work will involve additional performance testing of the motor, generator, and inverter. Information contained in this interim report summarizes the test results obtained to date, describes preliminary conclusions and findings, and identifies additional areas for further study.

  12. Evaluation of 2004 Toyota Prius Hybrid Electic Drive System Interim Report - Revised

    SciTech Connect (OSTI)

    Ayers, C.W.; Hsu, J.S.; Marlino, L.D.; Miller, C.W.; Ott, G.W., Jr.; Oland, C.B.; Burress, T.A.

    2007-07-31

    The 2004 Toyota Prius is a hybrid automobile equipped with a gasoline engine and a battery-powered electric motor. Both of these motive power sources are capable of providing mechanical drive power for the vehicle. The engine can deliver a peak power output of 57 kilowatts (kW) at 5000 revolutions per minute (rpm) while the motor can deliver a peak power output of 50 kW at 1300 rpm. Together, this engine-motor combination has a specified peak power output of 82 kW at a vehicle speed of 85 kilometers per hour (km/h). In operation, the 2004 Prius exhibits superior fuel economy compared to conventionally powered automobiles. Laboratory tests were conducted to evaluate the electrical and mechanical performance of the 2004 Toyota Prius and its hybrid electric drive system. As a hybrid vehicle, the 2004 Prius uses both a gasoline-powered internal combustion engine and a battery-powered electric motor as motive power sources. Innovative algorithms for combining these two power sources results in improved fuel efficiency and reduced emissions compared to traditional automobiles. Initial objectives of the laboratory tests were to measure motor and generator back-electromotive force (emf) voltages and determine gearbox-related power losses over a specified range of shaft speeds and lubricating oil temperatures. Follow-on work will involve additional performance testing of the motor, generator, and inverter. Information contained in this interim report summarizes the test results obtained to date, describes preliminary conclusions and findings, and identifies additional areas for further study.

  13. 2010 Toyota Prius VIN 6063 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Matthew Shirk

    2013-01-01

    The U.S. Department of Energy Advanced Vehicle Testing Activity Program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on hybrid electric vehicles (HEVs), including testing the HEV batteries when both the vehicles and batteries are new and at the conclusion of 160,000 miles of on road fleet testing. This report documents battery testing performed for the 2010 Toyota Prius HEV (VIN JTDKN3DU5A0006063). Battery testing was performed by the Electric Transportation Engineering Corporation dba ECOtality North America. The Idaho National Laboratory and ECOtality North America collaborate on the Advanced Vehicle Testing Activity for the Vehicle Technologies Program of the U.S. Department of Energy.

  14. 2010 Toyota Prius VIN 0462 Hybrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Matthew Shirk

    2013-01-01

    The U.S. Department of Energy Advanced Vehicle Testing Activity Program consists of vehicle, battery, and infrastructure testing on advanced technology related to transportation. The activity includes tests on hybrid electric vehicles (HEVs), including testing the HEV batteries when both the vehicles and batteries are new and at the conclusion of 160,000 miles of on road fleet testing. This report documents battery testing performed for the 2010 Toyota Prius HEV (VIN: JTDKN3DU2A5010462). Battery testing was performed by the Electric Transportation Engineering Corporation dba ECOtality North America. The Idaho National Laboratory and ECOtality North America collaborate on the Advanced Vehicle Testing Activity for the Vehicle Technologies Program of the U.S. Department of Energy.

  15. Toyota Prius Plug-In HEV: A Plug-In Hybrid Electric Car in NREL's Advanced Technology Vehicle Fleet (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    This fact sheet highlights the Toyota Prius plug-in HEV, a plug-in hybrid electric car in the advanced technology vehicle fleet at the National Renewable Energy Laboratory (NREL). In partnership with the University of Colorado, NREL uses the vehicle for grid-integration studies and for testing new hardware and charge-management algorithms. NREL's advanced technology vehicle fleet features promising technologies to increase efficiency and reduce emissions without sacrificing safety or comfort. The fleet serves as a technology showcase, helping visitors learn about innovative vehicles that are available today or are in development. Vehicles in the fleet are representative of current, advanced, prototype, and emerging technologies.

  16. On-road evaluation of advanced hybrid electric vehicles over a wide range of ambient temperatures.

    SciTech Connect (OSTI)

    Carlson, R.; Duoba, M. J.; Bocci, D.; Lohse-Busch, H.

    2007-01-01

    In recent years, Hybrid Electric Vehicles (HEV's) have become a production viable and effective mode of efficient transportation. HEV's can provide increased fuel economy over convention technology vehicle, but these advantages can be affected dramatically by wide variations in operating temperatures. The majority of data measured for benchmarking HEV technologies is generated from ambient test cell temperatures at 22 C. To investigate cold and hot temperature affects on HEV operation and efficiency, an on-road evaluation protocol is defined and conducted over a six month study at widely varying temperatures. Two test vehicles, the 2007 Toyota Camry HEV and 2005 Ford Escape HEV, were driven on a pre-defined urban driving route in ambient temperatures ranging from -14 C to 31 C. Results from the on-road evaluation were also compared and correlated to dynamometer testing of the same drive cycle. Results from this on-road evaluation show the battery power control limits and engine operation dramatically change with temperature. These changes decrease fuel economy by more than two times at -14 C as compared to 25 C. The two vehicles control battery temperature in different manners. The Escape HEV uses the air conditioning system to provide cool air to the batteries at high temperatures and is therefore able to maintain battery temperature to less than 33 C. The Camry HEV uses cabin air to cool the batteries. The observed maximum battery temperature was 44 C.

  17. Test Driving the Toyota Mirai

    Broader source: Energy.gov [DOE]

    Watch a video of Energy Secretary Ernest Moniz test driving the Toyota Mirai, the first fuel cell electric vehicle available for sale.

  18. Toyota Collaborates with the ALS and Molecular Foundry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Toyota Collaborates with the ALS and Molecular Foundry Toyota Collaborates with the ALS and Molecular Foundry Print Friday, 18 July 2014 10:41 Toyota has been conducting research...

  19. Plug-In Hybrid Electric Vehicles | Argonne National Laboratory

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Plug-In Hybrid Electric Vehicles 2014 BMW i3-REX 2013 Chevrolet Volt 2013 Ford Cmax Energi 2013 Ford Fusion Energi 2013 Toyota Prius 2012 Chevrolet Volt 2012 Toyota Prius Electric...

  20. Report on Toyota Prius Motor Thermal Management

    SciTech Connect (OSTI)

    Hsu, J.S.

    2005-02-11

    In the current hybrid vehicle market, the Toyota Prius drive system is considered the leader in electrical, mechanical, and manufacturing innovations. It is a significant accomplishment that Toyota is able to manufacture and sell the vehicle for a profit. The Toyota Prius traction motor design approach for reducing manufacturing costs and the motor s torque capability have been studied and tested. The findings were presented in two previous Oak Ridge National Laboratory (ORNL) reports. The conclusions from this report reveal, through temperature rise tests, that the 2004 Toyota Prius (THSII) motor is applicable only for use in a hybrid automobile. It would be significantly undersized if used in a fuel cell vehicle application. The power rating of the Prius motor is limited by the permissible temperature rise of the motor winding (170 C) and the motor cooling oil (158 C). The continuous ratings at base speed (1200 rpm) with different coolant temperatures are projected from test data at 900 rpm. They are approximately 15 kW with 105 C coolant and 21 kW with 35 C coolant. These continuous ratings are much lower than the 30 kW specified as a technical motor target of the U.S. Department of Energy FreedomCAR Program. All tests were conducted at about 24 C ambient temperature. The load angle of each torque adjustment was monitored to prevent a sudden stop of the motor if the peak torque were exceeded, as indicated by the load angle in the region greater than 90 electrical degrees. For peak power with 400 Nm torque at 1200 rpm, the permissible running time depends upon the initial winding temperature condition. The projected rate of winding temperature rise is approximately 2.1 C/sec. The cooling-oil temperature does not change much during short peak power operation. For light and medium load situations, the efficiency varies from 80% to above 90%, and the power factor varies from 70% to above 90%, depending on the load and speed. When the motor is loaded heavily near the peak-torque (400-Nm) region, the efficiency goes down to the 40-50% range, and the power factor is nearly 100%. The efficiency is not a major concern at the high-torque region. The water-ethylene-glycol heat exchanger attached to the motor is small. During continuous operation, it dissipates about 76% of the total motor heat loss with 35 C coolant. The heat exchanger is less effective when the coolant temperature increases. With 75 C coolant, the heat exchanger dissipates about 38% of the motor heat. When the coolant temperature is 105 C, the heat exchanger not only stops cooling the motor but also adds heat to the large motor housing that acts as an air-cooled heat sink. From start to the base speed, 400 Nms of torque can be produced by the Prius motor with a reasonably low stator current. However, the permissible running time of the motor depends on the load drawn from the motor and the coolant temperature. In the Toyota Prius hybrid configuration, if the motor gets too hot and cannot keep running, the load can be shifted back to the engine. The motor acts to improve the system efficiency without being overly designed. A detailed thermal model was developed to help predict the temperature levels in key motor components. The model was calibrated and compared with the experimentally measured temperatures. Very good agreement was obtained between model and experiment. This model can now be used to predict the temperature of key motor components at a variety of operating conditions and to evaluate the thermal characteristics of new motor designs. It should be pointed out that a fuel-cell motor does not have an engine to fall back on to provide the needed wheel power. Therefore, the design philosophy of a fuel-cell motor is very different from that of a hybrid Prius motor. Further thermal management studies in the high-speed region of the Prius motor, fed by its inverter, are planned.

  1. NREL: Energy Systems Integration - Toyota

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines light on771/6/14RecentGeospatial AnalysisPartnerships WatchToyota One of

  2. 2006 Toyota Highlander-6395 Hyrid Electric Vehicle Battery Test Results

    SciTech Connect (OSTI)

    Tyler Gray; Chester Motloch; James Francfort

    2010-01-01

    The U.S. Department of Energy's Advanced Vehicle Testing Activity conducts several different types of tests on hybrid electric vehicles, including testing hybrid electric vehicles batteries when both the vehicles and batteries are new, and at the conclusion of 160,000 miles of accelerated testing. This report documents the battery testing performed and battery testing results for the 2007 Toyota Highlander hybrid electric vehicle (Vin Number JTEDW21A160006395). Testing was performed by the Electric Transportation Engineering Corporation. The Advanced Vehicle Testing Activity is part of the U.S. Department of Energy's Vehicle Technologies Program. The Idaho National Laboratory and the Electric Transportation Engineering Corporation conduct Advanced Vehicle Testing Activity for the U.S. Department of Energy.

  3. AVTA: 2010 Toyota Prius Gen III HEV Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a 2010 Toyota Prius III hybrid-electric vehicle. Baseline data, which provides a point of comparison for the other test results, was collected at two different research laboratories. Baseline and other data collected at Idaho National Laboratory is in the attached documents. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  4. Watch Energy Secretary Moniz Test Drive the Toyota Mirai

    Broader source: Energy.gov [DOE]

    The Energy Department posted a video of ?Secretary Ernest Moniz driving the Toyota Mirai, the first fuel cell electric vehicle (FCEV) for sale in the United States.

  5. A study in hybrid vehicle architectures : comparing efficiency and performance

    E-Print Network [OSTI]

    Cotter, Gavin M

    2009-01-01

    This paper presents a comparison of performance and efficiencies for four vehicle power architectures; the internal combustion engine (ICE), the parallel hybrid (i.e. Toyota Prius), the serial hybrid (i.e. Chevrolet Volt), ...

  6. AVTA: 2013 Toyota Prius PHEV Testing Results

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. These results provide benchmark data that researchers can use to develop technology models and guide future research and development. The following reports describe results of testing done on a Toyota Prius PHEV 2013. Baseline and battery testing data collected at Argonne National Laboratory is available in summary and CSV form on the Argonne Downloadable Dynometer Database site (http://www.anl.gov/energy-systems/group/downloadable-dynamometer-databas...). The reports for download here are based on research done at Idaho National Laboratory. Taken together, these reports give an overall view of how this vehicle functions under extensive testing.

  7. Reuse of hybrid car power systems

    E-Print Network [OSTI]

    Kirkby, Nicholas (Nicholas J.)

    2015-01-01

    Used hybrid car power systems are inexpensive and capable of tens of kilowatts of power throughput. This paper documents a process for using the second generation Toyota Prius inverter module to drive a three phase permanent ...

  8. Development of Statistical Energy Analysis Tools for Toyota Motor Engineering & Manufacturing 

    E-Print Network [OSTI]

    Chen, J; Collins, Ro.; Gao, G.; Schaffer, D.; Wu, J.

    2014-01-01

    ? Recommendations ESL-IE-14-05-06 Proceedings of the Thrity-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Duke Team Project Overview ? Client: Tim Hertel, Toyota Energy Engineer and Energy Manager ? Visited Kentucky plant to learn...-Sixth Industrial Energy Technology Conference New Orleans, LA. May 20-23, 2014 Presentation Agenda ? Project introduction and goals ? Duke team’s energy consumption models ? Analysis of Toyota’s current consumption model ? Duke vs. Toyota’s model ? Results...

  9. Transforming commercial aerospace supply chain management practices by utilizing Toyota production system principles, practices, and methodologies

    E-Print Network [OSTI]

    Patneaude, Steven M

    2008-01-01

    This thesis examines The Toyota Motor Corporation's core precepts, management principles, supply chain architecture, product development methods, leveraged practice of supplier partnerships and procurement practices, all ...

  10. Evaluation of Range Estimates for Toyota FCHV-adv Under Open...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    for Toyota FCHV-adv Under Open Road Driving Conditions More Documents & Publications US DRIVE Hydrogen Storage Technical Team Roadmap National Fuel Cell Electric Vehicle Learning...

  11. Applying the Toyota Production System to a Hospital Pharmacy Durward K. Sobek, II

    E-Print Network [OSTI]

    Sobek II, Durward K.

    . Keywords: Toyota Production System, health care, lean manufacturing 1. Introduction The Toyota Production it has became known as the "Japanese approach" to manufacturing, later dubbed lean manufacturing because and around the world with such success that "lean" is rapidly becoming the dominant manufacturing paradigm

  12. Toyota Collaborates with the ALS and Molecular Foundry

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home RoomPreservationBio-Inspired Solar FuelTechnologyTel:FebruaryEIA's Today8TopoTowards a DesignToyota

  13. Commitment is a Two-Way Street: Toyota, California and NUMMI

    E-Print Network [OSTI]

    Shaiken, Harley

    2010-01-01

    Room D. “Toyota moving Tacoma production to San Antonio,”NUMMI today—the Corolla and Tacoma compact pickup—will rollMoving Corolla and some Tacoma production offshore would

  14. Determining PHEV Performance Potential – User and Environmental Influences on A123 Systems’ Hymotion™ Plug-In Conversion Module for the Toyota Prius

    SciTech Connect (OSTI)

    John G. Smart; Huang Iu

    2009-05-01

    A123Systems’s HymotionTM L5 Plug-in Conversion Module (PCM) is a supplemental battery system that converts the Toyota Prius hybrid electric vehicle (HEV) into a plug-in hybrid electric vehicle (PHEV). The Hymotion system uses a lithium ion battery pack with 4.5 kWh of useable energy capacity and recharges by plugging into a standard 110/120V outlet. The system is designed to more than double the Prius fuel efficiency for 30-50km of charge depleting range. This paper will cover efforts by A123 Systems and the Idaho National Laboratory in studying the on-road performance of this PHEV fleet. The performance potentials of various fleets will be compared in order to determine the major influences on overall performance.

  15. Abstract--In the design of hybrid vehicles, it is important to identify proper component sizes. When the search space of the

    E-Print Network [OSTI]

    Peng, Huei

    in this paper. This method is applied to design an input-split hybrid vehicle utilizing a single planetary gear and Toyota Highlander Hybrid, use two planetary gears. There are also hybrid designs in combat vehicles [4-planetary gear configurations are design candidates, we explore the full search space of configuration

  16. Report on the Field Performance of A123Systems’s HymotionTM Plug-in Conversion Module for the Toyota Prius

    SciTech Connect (OSTI)

    Huang Iu; John Smart

    2009-04-01

    A123Systems’s HymotionTM L5 Plug-in Conversion Module (PCM) is a supplemental battery system that converts the Toyota Prius hybrid electric vehicle (HEV) into a plug-in hybrid electric vehicle (PHEV). The Hymotion system uses a lithium ion battery pack with 4.5 kWh of useable energy capacity. It recharges by plugging into a standard 110/120V outlet. The system is designed to more than double the Prius fuel efficiency for 30-40 miles of charge depleting range. If the Hymotion pack is fully depleted, the Prius operates as a normal HEV in charge sustaining mode. The Hymotion L5 PCM is the first commercially available aftermarket product complying with CARB emissions and NHTSA impact standards. Since 2006, over 50 initial production Hymotion Plug-in Conversion Modules have been installed in private fleet vehicles across the United States and Canada. With the help of the Idaho National Laboratory, which conducts the U.S. Department of Energy’s (DOE) Advanced Vehicle Testing Activity (AVTA), A123Systems collects real-time vehicle data from each fleet vehicle using on-board data loggers. These data are analyzed to determine vehicle performance. This paper presents the results of this field evaluation. Data to be presented includes the L5 Prius charge depleting range, gasoline fuel efficiency, and electrical energy efficiency. Effects of driving conditions, driving style, and charging patterns on fuel efficiency are also presented. Data show the Toyota Prius equipped with the Hymotion Plug-in Conversion Module is capable of achieving over 100 mpg in certain driving conditions when operating in charge depleting mode.

  17. Fact #611: February 22, 2010 Top Ten Best Selling Cars and Light Trucks

    Broader source: Energy.gov [DOE]

    The top ten lists of best selling cars and light trucks in 2009 show that the Toyota Camry was the best selling car, while the Ford F-Series pickup was the best selling light truck. The F-Series...

  18. 2016 Toyota Mirai Fuel Cell Car First Drive - HybridCars.com Review |

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIX ECoop IncIowa (UtilityMichigan)data bookresult9) Jump to: navigation,7GroupsOpenEI

  19. Vehicle Technologies Office: AVTA- Plug-In Hybrid Electric Vehicles Performance and Testing Data

    Broader source: Energy.gov [DOE]

    The Advanced Vehicle Testing Activity (AVTA) uses standard procedures and test specifications to test and collect data from vehicles on dynamometers, closed test tracks, and on-the-road. Data on the plug-in hybrid electric version of the following vehicles is available: 2013 Ford Fusion Energi, 2013 Ford C-Max Energi Fleet, 2013 Ford C-Max Energi, 2012 Chevrolet Volt, 2012 Toyota Prius, 2013 Toyota Prius, 2013 Chevrolet Volt, 2011 Chrysler Town & Country, 2010 Quantum Escape, and 2010 Ford Escape Advanced Research Vehicle.

  20. Vehicle Technologies Office: AVTA- Hybrid Electric Vehicles Performance and Testing Data

    Broader source: Energy.gov [DOE]

    The Advanced Vehicle Testing Activity (AVTA) uses standard procedures and test specifications to test and collect data from vehicles on dynamometers, closed test tracks, and on-the-road. This page provides data on the hybrid electric versions of the Volkswagen Jetta, Ford C-Max, Chevrolet Malibu, Honda Civic, Hyundai Sonata, Honda CRZ, Honda Civic with Advanced Experimental Ultra Lead Acid Battery, Mercedes Benz, Toyota Prius Gen III, Ford Fusion, Honda Insight and Honda CR-Z.

  1. Model year 2010 (Gen 3) Toyota Prius level 1 testing report.

    SciTech Connect (OSTI)

    Rask, E.; Duoba, M.; Lohse-Busch, H.; Bocci, D.; Energy Systems

    2010-06-24

    As a part of the US Department of Energy's Advanced Vehicle Testing Activity (AVTA), a model year 2010 Toyota Prius (Generation 3) was procured by eTec (Phoenix, AZ) and sent to ANL's Advanced Powertrain Research Facility for the purposes of 'Level 1' testing in support of the Advanced Vehicle Testing Activity (AVTA). Data was acquired during testing using non-intrusive sensors, vehicle network connection, and facilities equipment (emissions and dynamometer data). Standard drive cycles, performance cycles, steady-state cycles and A/C usage cycles were conducted. Much of this data is openly available for download in ANL's Downloadable Dynamometer Database (D{sup 3}). The major results are shown here in this report. Given the preliminary nature of this assessment, the majority of the testing was done over standard regulatory cycles and seeks to obtain a general overview of how the vehicle performs. These cycles include the US FTP cycle (Urban) and Highway Fuel Economy Test cycle as well as the US06, a more aggressive supplemental regulatory cycle. Data collection for this testing was kept at a fairly high level and includes emissions and fuel measurements from the exhaust emissions bench, high-voltage and accessory current and voltage from a DC power analyzer, and minimal CAN bus data such as engine speed and pedal position. The following sections will seek to explain some of the basic operating characteristics of the MY2010 Prius over standard regulatory cycles.

  2. Saving Fuel, Reducing Emissions

    E-Print Network [OSTI]

    Kammen, Daniel M.; Arons, Samuel M.; Lemoine, Derek M.; Hummel, Holmes

    2009-01-01

    and Impacts of Hybrid Electric Vehicle Options for Compactand Impacts of Hybrid Electric Vehicle Options. (EPRI: PaloEvaluation of Hybrid Electric Vehicles: Toyota’s Prius vs.

  3. Hybrid Identities

    E-Print Network [OSTI]

    Montclair, Sani

    2012-01-01

    Hybrid Identity; Family, Photography and History in Colonialintersectional politics of hybrid identity is the primarycreated a distinctively hybrid culture, one where language,

  4. Fact #568: April 27, 2009 For Modern Cars, Replacing an Air Filter...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Percent 2003 Toyota Camry 17.24 18.51 1.26 7% 2007 Buick Lucerne 13.77 15.45 1.68 11% 2006 Dodge Charger 10.23 10.84 0.61 6% * Wide-open throttle. Source: Kevin Norman,...

  5. Close Look at Hybrid Vehicle Loyalty and Ownership

    SciTech Connect (OSTI)

    Hwang, Ho-Ling; Chin, Shih-Miao; Wilson, Daniel W; Oliveira Neto, Francisco Moraes; Taylor, Rob D

    2013-01-01

    In a news release dated April 9, 2012, Polk stated that only 35% of hybrid owners bought a hybrid again when they returned to market in 2011. These findings were based on an internal study conducted by Polk. The study also indicated that if repurchase behavior among the high volume audience of Toyota Prius owners wasn t factored in; hybrid loyalty would drop to under 25%. This news release has generated a lot of interest and concern by the automobile industry as well as consumers, since it was published, and caused many to think about the idea of hybrid loyalty as well as factors that influence consumers. Most reactions to the 35% hybrid loyalty dealt with concerns of the viability of hybrid technology as part of the solution to address transportation energy challenges. This paper attempts to shed more light on Polk s hybrid loyalty study as well as explore several information sources concerning hybrid loyalty status. Specifically, major factors that might impact the selection and acquisition of hybrid vehicles are addressed. This includes investigating the associations between hybrid market shares and influencing factors like fuel price and hybrid incentives, as well as the availability of hybrid models and other highly fuel efficient vehicle options. This effort is not in-depth study, but rather a short study to see if Polk s claim could be validated. This study reveals that Polk s claim was rather misleading because its definition of loyalty was very narrow. This paper also suggests that Polk s analysis failed to account for some very important factors, raising the question of whether it is fair to compare a vehicle drive train option (which hybrids are) with a vehicle brand in terms of loyalty and also raises the question of whether hybrid loyalty is even a valid point to consider. This report maintains that Polk s study does not prove that hybrid owners were dissatisfied with their vehicles, which was a common theme among reporting news agencies when Polk initially released their findings. In this brief review, the team has looked at factors that might contribute to a consumer choosing to not purchase a hybrid; including the increase in manufacture s overall vehicle mpg and the percentage of the vehicle market owned by hybrids.

  6. Toyota | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EA EISTJThin Film SolarTown of Skiatook, OklahomaInformationToyola

  7. Hybrid Mesons

    E-Print Network [OSTI]

    C. A. Meyer; E. S. Swanson

    2015-03-04

    A review of the theoretical and experimental status of hybrid hadrons is presented. The states $\\pi_1(1400)$, $\\pi_1(1600)$, and $\\pi_1(2015)$ are thoroughly reviewed, along with experimental results from GAMS, VES, Obelix, COMPASS, KEK, CLEO, Crystal Barrel, CLAS, and BNL. Theoretical lattice results on the gluelump spectrum, adiabatic potentials, heavy and light hybrids, and transition matrix elements are discussed. These are compared with bag, string, flux tube, and constituent gluon models. Strong and electromagnetic decay models are described and compared to lattice gauge theory results. We conclude that while good evidence for the existence of a light isovector exotic meson exists, its confirmation as a hybrid meson awaits discovery of its iso-partners. We also conclude that lattice gauge theory rules out a number of hybrid models and provides a reference to judge the success of others.

  8. Gasoline-fueled hybrid vs. conventional vehicle emissions and fuel economy.

    SciTech Connect (OSTI)

    Anderson, J.; Bharathan, D.; He, J.; Plotkin, S.; Santini, D.; Vyas, A.

    1999-06-18

    This paper addresses the relative fuel economy and emissions behavior, both measured and modeled, of technically comparable, contemporary hybrid and conventional vehicles fueled by gasoline, in terms of different driving cycles. Criteria pollutants (hydrocarbons, carbon monoxide, and nitrogen oxides) are discussed, and the potential emissions benefits of designing hybrids for grid connection are briefly considered. In 1997, Toyota estimated that their grid-independent hybrid vehicle would obtain twice the fuel economy of a comparable conventional vehicle on the Japan 10/15 mode driving cycle. This initial result, as well as the fuel economy level (66 mpg), made its way into the U.S. press. Criteria emissions amounting to one-tenth of Japanese standards were cited, and some have interpreted these results to suggest that the grid-independent hybrid can reduce criteria emissions in the U.S. more sharply than can a conventional gasoline vehicle. This paper shows that the potential of contemporary grid-independent hybrid vehicle technology for reducing emissions and fuel consumption under U.S. driving conditions is less than some have inferred. The importance (and difficulty) of doing test and model assessments with comparable driving cycles, comparable emissions control technology, and comparable performance capabilities is emphasized. Compared with comparable-technology conventional vehicles, grid-independent hybrids appear to have no clear criteria pollutant benefits (or disbenefits). (Such benefits are clearly possible with grid-connectable hybrids operating in zero emissions mode.) However, significant reductions in greenhouse gas emissions (i.e., fuel consumption) are possible with hybrid vehicles when they are used to best advantage.

  9. Hybrid Mesons

    E-Print Network [OSTI]

    Bernhard Ketzer

    2012-08-25

    The SU(3)_flavor constituent quark model has been quite successful to explain the properties as well as the observed spectrum of mesons with pseudoscalar and vector quantum numbers. Many radial and orbital excitations of quark-antiquark systems predicted by the model, however, have not yet been observed experimentally or assigned unambiguously. In addition, a much richer spectrum of mesons is expected from QCD, in which quarks interact which each other through the exchange of colored self-interacting gluons. Owing to this particular structure of QCD, configurations are allowed in which an excited gluonic field contributes to the quantum numbers J^{PC} of the meson. States with a valence color-octet qqbar' pair neutralized in color by an excited gluon field are termed hybrids. The observation of such states, however, is difficult because they will mix with ordinary qqbar' states with the same quantum numbers, merely augmenting the observed spectrum for a given J^{PC}. Since the gluonic field may carry quantum numbers other than 0^{++}, however, this can give rise to states with "exotic" quantum numbers J^{PC}=0^{--}, 0^{+-}, 1^{-+}, 2^{+-},... The lowest-lying hybrid multiplet is expected to contain a state with exotic quantum numbers J^{PC}=1^{-+}. The identification of such a state is considered a "smoking gun" for the observation of non-qqbar mesons. The search for hybrid states has been a central goal of hadron spectroscopy in the last 20 years. Ongoing and upcoming high-statistics experiments are expected to shed new light on the existence of such states in nature. In this paper, theoretical predictions for masses and decay modes as well as recent experimental evidence for hybrid meson states and future experimental directions are discussed.

  10. Hybrid type checking

    E-Print Network [OSTI]

    Flanagan, C

    2006-01-01

    O’Callahan and J. -D. Choi. Hybrid dynamic data race detec-subtyping is sound, the hybrid compilation algorithmHybrid Type Checking Cormac Flanagan Department of Computer

  11. OpenEI Community - toyota

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History ViewMayo, Maryland:NPI VenturesNewSt.Information OlindaOnslow County,OpTICOpenBarter Jump

  12. toyota | OpenEI Community

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION JEnvironmental Jump to:EAand Dalton Jump to:Wylie, Texas: EnergyYBRZAPgftIDmirai Homerankingtoyota

  13. Hybrid and multifield inflation

    E-Print Network [OSTI]

    Sfakianakis, Evangelos I

    2014-01-01

    In this thesis I study the generation of density perturbations in two classes of inflationary models: hybrid inflation and multifield inflation with non-minimal coupling to gravity. In the case of hybrid inflation, we ...

  14. Hybrid Power Test Bed

    SciTech Connect (OSTI)

    NONE

    1996-06-01

    This document describes efforts by the National Renewable Energy Laboratory to simulate hybrid power systems. Hybrid power systems combine multiple power sources such as wind turbines, photovoltaic (PV) arrays, diesel generators, and battery storage systems. They typically are used in remote areas, away from major electric grids. The Hybrid Power Test Bed is designed to assist the U.S. wind industry in developing and testing hybrid power generation systems. Test bed capabilities, features, and equipment are described.

  15. Mesoscale hybrid calibration artifact

    SciTech Connect (OSTI)

    Tran, Hy D. (Albuquerque, NM); Claudet, Andre A. (Albuquerque, NM); Oliver, Andrew D. (Waltham, MA)

    2010-09-07

    A mesoscale calibration artifact, also called a hybrid artifact, suitable for hybrid dimensional measurement and the method for make the artifact. The hybrid artifact has structural characteristics that make it suitable for dimensional measurement in both vision-based systems and touch-probe-based systems. The hybrid artifact employs the intersection of bulk-micromachined planes to fabricate edges that are sharp to the nanometer level and intersecting planes with crystal-lattice-defined angles.

  16. Hybrid Systems Frits Vaandrager

    E-Print Network [OSTI]

    Vaandrager, Frits

    on these data, the computer may decide to turn on a heating system, switch off a pump, etc. When a dangerous1 Hybrid Systems Frits Vaandrager 1 Introduction Hybrid systems are systems that intermix discrete. The specification, design and analysis of hybrid systems require a synthesis of ideas, concepts, mathe­ matical

  17. Hybrid armature projectile

    DOE Patents [OSTI]

    Hawke, Ronald S. (Livermore, CA); Asay, James R. (Los Lunas, NM); Hall, Clint A. (Albuquerque, NM); Konrad, Carl H. (Albuquerque, NM); Sauve, Gerald L. (Berthoud, CO); Shahinpoor, Mohsen (Albuquerque, NM); Susoeff, Allan R. (Pleasanton, CA)

    1993-01-01

    A projectile for a railgun that uses a hybrid armature and provides a seed block around part of the outer surface of the projectile to seed the hybrid plasma brush. In addition, the hybrid armature is continuously vaporized to replenish plasma in a plasma armature to provide a tandem armature and provides a unique ridge and groove to reduce plasama blowby.

  18. Corn Hybrid Virginia Corn &

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Virginia Corn Hybrid and Management Trials 2007 Virginia Corn & Small Grain Management #12;VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS IN 2007 Coordinators of Virginia Corn Hybrid Trials in 2007 Wade Thomason, Extension Specialist, Department of Crop and Soil Environmental Sciences, Virginia Tech Harry

  19. Corn Hybrid Virginia Corn &

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    Virginia Corn Hybrid Management and Trials 2006 Virginia Corn & Small Grain Management #12;#12;Virginia Corn Hybrid and Management Trials 2006 Coordinators of Virginia Corn Hybrid Trials in 2006 Wade Thomason, Extension Specialist, Department of Crop and Soil Environmental Sciences, Virginia Tech Harry

  20. The hydrogen hybrid option

    SciTech Connect (OSTI)

    Smith, J.R.

    1993-10-15

    The energy efficiency of various piston engine options for series hybrid automobiles are compared with conventional, battery powered electric, and proton exchange membrane (PEM) fuel cell hybrid automobiles. Gasoline, compressed natural gas (CNG), and hydrogen are considered for these hybrids. The engine and fuel comparisons are done on a basis of equal vehicle weight, drag, and rolling resistance. The relative emissions of these various fueled vehicle options are also presented. It is concluded that a highly optimized, hydrogen fueled, piston engine, series electric hybrid automobile will have efficiency comparable to a similar fuel cell hybrid automobile and will have fewer total emissions than the battery powered vehicle, even without a catalyst.

  1. Formula Hybrid International Competition

    E-Print Network [OSTI]

    Carver, Jeffrey C.

    , and computerized control systems. But the greatest obstacle of all was that hybrid cars could not meet newlyFormula Hybrid International Competition May 4, 5, 6, 2009 #12;09 annual third We are thrilled to have 30 cars competing this year. The competition is the result of the hard work of many people

  2. Hybrid Quantum Cloning Machine

    E-Print Network [OSTI]

    Satyabrata Adhikari; A. K. Pati; Indranil Chakrabarty; B. S. Choudhury

    2007-06-14

    In this work, we introduce a special kind of quantum cloning machine called Hybrid quantum cloning machine. The introduced Hybrid quantum cloning machine or transformation is nothing but a combination of pre-existing quantum cloning transformations. In this sense it creates its own identity in the field of quantum cloners. Hybrid quantum cloning machine can be of two types: (i) State dependent and (ii) State independent or Universal. We study here the above two types of Hybrid quantum cloning machines. Later we will show that the state dependent hybrid quantum-cloning machine can be applied on only four input states. We will also find in this paper another asymmetric universal quantum cloning machine constructed from the combination of optimal universal B-H quantum cloning machine and universal anti-cloning machine. The fidelities of the two outputs are different and their values lie in the neighborhood of ${5/6} $

  3. Hybrid Automata-based CEGAR for Rectangular Hybrid Systems

    E-Print Network [OSTI]

    Liberzon, Daniel

    Hybrid Automata-based CEGAR for Rectangular Hybrid Systems Pavithra Prabhakar, Sridhar Duggirala- example guided abstraction-refinement (CEGAR) for systems modelled as rectangular hybrid automata. The main difference, between our ap- proach and previous proposals for CEGAR for hybrid automata

  4. HYBRID LIMIT CYCLES AND HYBRID POINCARE-BENDIXSON

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    HYBRID LIMIT CYCLES AND HYBRID POINCAR´E-BENDIXSON Slobodan N. Simi´c Department of Electrical regular hybrid systems with no branching (Simi´c et al., 2000a). The first one provides a condition for asymptotic stability of hybrid closed orbits in terms of contraction-expansion rates of resets and flows

  5. Hybrid 2012 Innovative Hybrid Approaches to the Processing of

    E-Print Network [OSTI]

    EACL 2012 Hybrid 2012 Innovative Hybrid Approaches to the Processing of Textual Data Proceedings@aclweb.org ii #12;Introduction The hybrid approach term covers a large set of situations in which different of the dedicated task. Hybrid approaches are commonly used in various NLP applications (i.e., automatic creation

  6. Hybrid Systems State estimation for hybrid systems: applications

    E-Print Network [OSTI]

    Tomlin, Claire

    Hybrid Systems State estimation for hybrid systems: applications to aircraft tracking I. Hwang, H of a stochastic linear hybrid system, given only the continuous system output data, is studied. Well established techniques for hybrid estimation, known as the multiple model adaptive estimation algorithm

  7. EVOLUTION OF L HYBRID WAVES

    E-Print Network [OSTI]

    Karney, Charles

    . INTRODUCTIO In typical lower hybrid heating schemes, lower hybrid waves are launched at the wall sf tokamak. In this paper we study the C numerically, and determine the consequences of our results for lower hybrid heating hybrid heating of a tokamak. 11. THE CMKDV EQUAT The two-dimensional steady-state propagation of a single

  8. Hybrid matrix fiber composites

    DOE Patents [OSTI]

    Deteresa, Steven J.; Lyon, Richard E.; Groves, Scott E.

    2003-07-15

    Hybrid matrix fiber composites having enhanced compressive performance as well as enhanced stiffness, toughness and durability suitable for compression-critical applications. The methods for producing the fiber composites using matrix hybridization. The hybrid matrix fiber composites include two chemically or physically bonded matrix materials, whereas the first matrix materials are used to impregnate multi-filament fibers formed into ribbons and the second matrix material is placed around and between the fiber ribbons that are impregnated with the first matrix material and both matrix materials are cured and solidified.

  9. Lower-Energy Energy Storage System (LEESS) Evaluation in a Full-Hybrid Electric Vehicle (HEV) (Presentation)

    SciTech Connect (OSTI)

    Cosgrove, J.; Gonder, J.; Pesaran, A.

    2013-11-01

    The cost of hybrid electric vehicles (HEVs) (e.g., Toyota Prius or Ford Fusion Hybrid) remains several thousand dollars higher than the cost of comparable conventional vehicles, which has limited HEV market penetration. The battery energy storage device is typically the component with the greatest contribution toward this cost increment, so significant cost reductions/performance improvements to the energy storage system (ESS) can improve the vehicle-level cost-benefit relationship, which would in turn lead to larger HEV market penetration and greater aggregate fuel savings. The National Renewable Energy Laboratory (NREL) collaborated with a United States Advanced Battery Consortium (USABC) Workgroup to analyze trade-offs between vehicle fuel economy and reducing the minimum energy requirement for power-assist HEVs. NREL's analysis showed that significant fuel savings could still be delivered from an ESS with much lower energy storage than previous targets, which prompted the United States Advanced Battery Consortium (USABC) to issue a new set of lower-energy ESS (LEESS) targets that could be satisfied by a variety of technologies, including high-power batteries or ultracapacitors. NREL has developed an HEV test platform for in-vehicle performance and fuel economy validation testing of the hybrid system using such LEESS devices. This presentation describes development of the vehicle test platform and in-vehicle evaluation results using a lithium-ion capacitor ESS-an asymmetric electrochemical energy storage device possessing one electrode with battery-type characteristics (lithiated graphite) and one with ultracapacitor-type characteristics (carbon). Further efforts include testing other ultracapacitor technologies in the HEV test platform.

  10. Introduction Hybrid ICNs

    E-Print Network [OSTI]

    Schenato, Luca

    analysis Experimental results Conclusion Real-Time Networks and Protocols for Industrial Automation Lucia-Time Networks & Protocols for Industrial Automation Hybrid ICNs Modeling of real wireless components IEEE 802 Simulative analysis Experimental results Conclusion Industrial Communication Networks Nowadays Industrial

  11. Assimilating hybridized architecture

    E-Print Network [OSTI]

    Wu, Jane C., 1977-

    2005-01-01

    The thesis searches for means of operation to deal with hybridized architecture. As a conceptual framework, sociology theory appears to be an insightful precedent, for it analyzes and classifies how multiple constituents ...

  12. Heavy Hybrid mesons Masses

    E-Print Network [OSTI]

    F. Iddir; L. Semlala

    2006-11-25

    We estimate the ground state masses of the heavy hybrid mesons using a phenomenological QCD-type potential. 0^{- -},1^{- -},0^{- +},1^{- +} and 0^{+ -} J^{PC} states are considered.

  13. Hybrid adsorptive membrane reactor

    DOE Patents [OSTI]

    Tsotsis, Theodore T. (Huntington Beach, CA); Sahimi, Muhammad (Altadena, CA); Fayyaz-Najafi, Babak (Richmond, CA); Harale, Aadesh (Los Angeles, CA); Park, Byoung-Gi (Yeosu, KR); Liu, Paul K. T. (Lafayette Hill, PA)

    2011-03-01

    A hybrid adsorbent-membrane reactor in which the chemical reaction, membrane separation, and product adsorption are coupled. Also disclosed are a dual-reactor apparatus and a process using the reactor or the apparatus.

  14. Diesel hybridization and emissions.

    SciTech Connect (OSTI)

    Pasquier, M.; Monnet, G.

    2004-04-21

    The CTR Vehicle Systems and Fuels team a diesel hybrid powertrain. The goal of this experiment was to investigate and demonstrate the potential of diesel engines for hybrid electric vehicles (HEVs) in a fuel economy and emissions. The test set-up consisted of a diesel engine coupled to an electric motor driving a Continuously Variable Transmission (CVT). This hybrid drive is connected to a dynamometer and a DC electrical power source creating a vehicle context by combining advanced computer models and emulation techniques. The experiment focuses on the impact of the hybrid control strategy on fuel economy and emissions-in particular, nitrogen oxides (NO{sub x}) and particulate matter (PM). The same hardware and test procedure were used throughout the entire experiment to assess the impact of different control approaches.

  15. Hybrid models of transport in crowded environments

    E-Print Network [OSTI]

    Battiato, Ilenia

    2010-01-01

    6.2.5 Hybrid algorithm . . . . . . . . . . . . . . .88 Chapter 5 Hybrid Model for Reactive Flow in a5.3.1 Hybrid validation . . . . . . . . . . . . . . . vii

  16. Hybrid silicon evanescent approach to optical interconnects

    E-Print Network [OSTI]

    2009-01-01

    Big Island, HI, USA, 2006 Hybrid silicon evanescent approach10.1007/s00339-009-5118-1 Hybrid silicon evanescent approachthe recently developed hybrid silicon evanescent platform (

  17. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    Citroën Unveils 69mpg Diesel Hybrid Prototypes. 31 January.Citröen, have developed diesel-hybrid prototypes thatalso apply hybrid technologies to diesel vehicles, further

  18. Hybrid baryons in QCD

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Dudek, Jozef J.; Edwards, Robert G.

    2012-03-21

    In this study, we present the first comprehensive study of hybrid baryons using lattice QCD methods. Using a large basis of composite QCD interpolating fields we extract an extensive spectrum of baryon states and isolate those of hybrid character using their relatively large overlap onto operators which sample gluonic excitations. We consider the spectrum of Nucleon and Delta states at several quark masses finding a set of positive parity hybrid baryons with quantum numbers $N_{1/2^+},\\,N_{1/2^+},\\,N_{3/2^+},\\, N_{3/2^+},\\,N_{5/2^+},\\,$ and $\\Delta_{1/2^+},\\, \\Delta_{3/2^+}$ at an energy scale above the first band of `conventional' excited positive parity baryons. This pattern of states is compatible withmore »a color octet gluonic excitation having $J^{P}=1^{+}$ as previously reported in the hybrid meson sector and with a comparable energy scale for the excitation, suggesting a common bound-state construction for hybrid mesons and baryons.« less

  19. "Hybrid" Black Holes

    E-Print Network [OSTI]

    Valeri P. Frolov; Andrei V. Frolov

    2014-12-30

    We discuss a solution of the Einstein equations, obtained by gluing the external Kerr metric and the internal Weyl metric, describing an axisymmetric static vacuum distorted black hole. These metrics are glued at the null surfaces representing their horizons. For this purpose we use the formalism of massive thin null shells. The corresponding solution is called a "hybrid" black hole. The massive null shell has an angular momentum which is the origin of the rotation of the external Kerr spacetime. At the same time, the shell distorts the geometry inside the horizon. The inner geometry of the "hybrid" black hole coincides with the geometry of the interior of a non-rotating Weyl-distorted black hole. Properties of the "hybrid" black holes are briefly discussed.

  20. Porosity in hybrid materials

    SciTech Connect (OSTI)

    Schaefer, D.W.; Beaucage, G.; Loy, D. [Sandia National Labs., Albuquerque, NM (United States)

    1995-12-31

    Multicomponent, or hybrid composites are emerging as precursors to porous materials. Sacrifice of an ephemeral phase can be used to generate porosity, the nature of which depends on precursor structure. Retention of an organic constituent, on the other hand, can add desirable toughness to an otherwise brittle ceramic. We use small-angle x-ray and neutron scattering to examine porosity in both simple and hybrid materials. We find that microphase separation controls porosity in almost all systems studied. Pore distributions are controlled by the detailed bonding within and between phases as well as the flexibility of polymeric constituents. Thus hybridization opens new regions of pore distributions not available in simple systems. We look at several sacrificial concepts and show that it is possible to generate multimodal pore size distributions due to the complicated phase structure in the precursor.

  1. Corn Hybrids for Texas. 

    E-Print Network [OSTI]

    Rogers, J. S.; McAfee, T. E.

    1954-01-01

    Corn Hybrids for Terns ST LOCATIONS AREA I AREA II ARE4 Ill AREA IV 2Prdrie View 7.Tylw lZ.Lockhart 17.Waxahachie 22San Antonio 3.Cleveland 8.Mt. Pbctont I3Brsnha B.Garland 23Lamposas 4.Colbqe Sta. 9Sulphw Spp. 14Holland l9.0reenvilb 24...Stephenville ,J* 5.K'rbyvilb I0.Cbrkdb 15.Tanpk 2ODetiion 25.Wllothe TEXAS AGRICULTURAL EXPERIMENT STATION R. D. LEWIS. DIRECTOR, COLLEGE STATION, TEXAS DIGEST The Texas corn acreage planted to hybrids increased from less than 1 percent of the total acrea...

  2. Hybrid Cryptography Alexander W. Dent

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Cryptography Alexander W. Dent January 3, 2009 Version 1.1 This version is an update asymmet­ ric encryption schemes can benefit from a formalisation of the prin­ ciples of hybrid cryptography. The main focus of research in hybrid cryptography has been in producing e#cient asymmetric

  3. Hybrid Cryptography Alexander W. Dent

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Cryptography Alexander W. Dent January 3, 2009 Version 1.1 This version is an update asymmet- ric encryption schemes can benefit from a formalisation of the prin- ciples of hybrid cryptography. The main focus of research in hybrid cryptography has been in producing efficient asymmetric

  4. Hybrid & Hydrogen Vehicle Research Laboratory

    E-Print Network [OSTI]

    Lee, Dongwon

    Hybrid & Hydrogen Vehicle Research Laboratory www.vss.psu.edu/hhvrl Joel R. Anstrom, Director 201 The Pennsylvania Transportation Institute Hybrid and Hydrogen Vehicle Research Laboratory will contribute to the advancement of hybrid and hydrogen vehicle technology to promote the emerging hydrogen economy by providing

  5. Hybrid Quantum Computation

    E-Print Network [OSTI]

    Arun Sehrawat; Daniel Zemann; Berthold-Georg Englert

    2010-09-25

    We present a hybrid model of the unitary-evolution-based quantum computation model and the measurement-based quantum computation model. In the hybrid model part of a quantum circuit is simulated by unitary evolution and the rest by measurements on star graph states, thereby combining the advantages of the two standard quantum computation models. In the hybrid model, a complicated unitary gate under simulation is decomposed in terms of a sequence of single-qubit operations, the controlled-Z gates, and multi-qubit rotations around the z-axis. Every single-qubit- and the controlled-Z gate are realized by a respective unitary evolution, and every multi-qubit rotation is executed by a single measurement on a required star graph state. The classical information processing in our model only needs an information flow vector and propagation matrices. We provide the implementation of multi-control gates in the hybrid model. They are very useful for implementing Grover's search algorithm, which is studied as an illustrating example.

  6. JV Task 112-Optimal Ethanol Blend-Level Investigation

    SciTech Connect (OSTI)

    Richard Shockey; Ted Aulich; Bruce Jones; Gary Mead; Paul Steevens

    2008-01-31

    Highway Fuel Economy Test (HWFET) and Federal Test Procedure 75 (FTP-75) tests were conducted on four 2007 model vehicles; a Chevrolet Impala flex-fuel and three non-flex-fuel vehicles: a Ford Fusion, a Toyota Camry, and a Chevrolet Impala. This investigation utilized a range of undenatured ethanol/Tier II gasoline blend levels from 0% to 85%. HWFET testing on ethanol blend levels of E20 in the flex fuel Chevrolet Impala and E30 in the non-flex-fuel Ford Fusion and Toyota Camry resulted in miles-per-gallon (mpg) fuel economy greater than Tier 2 gasoline, while E40 in the non-flex-fuel Chevrolet Impala resulted in an optimum mpg based on per-gallon fuel Btu content. Exhaust emission values for non-methane organic gases (NMOG), carbon monoxide (CO), and nitrogen oxides (NO{sub x}) obtained from both the FTP-75 and the HWFET driving cycles were at or below EPA Tier II, Light-Duty Vehicles, Bin 5 levels for all vehicles tested with one exception. The flex-fuel Chevrolet Impala exceeded the NMOG standard for the FTP-75 on E-20 and Tier II gasoline.

  7. Corn Hybrids for Texas. 

    E-Print Network [OSTI]

    Rogers, J. S.; Bockholt, A. J.; Collier, J. W.

    1957-01-01

    practices which would bring their corn into tassel around June 1. This can be done by planting adapted hybrids at the dates recom- mended in Table 1. When planting is delayed, or if it is necessary to replant, hybrids with earlier maturity should... 90 ' 65.2 Coker 911 67.3 Texas 28 64.9 Texas 26 62.7 Texas 17W 73.0 Tennessee 29 67.5 Texas 9W 74.0 North Carolina 29 65.9 Georgia lOlW 70.7 Dixie 18 63.0 Asgrow lOlW 59.0 TRF 3 62.2 Coker 811 40.0 Surcropper 47.6 - - Averase yield 67...

  8. Pulsed hybrid field emitter

    DOE Patents [OSTI]

    Sampayan, S.E.

    1998-03-03

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays. 11 figs.

  9. Pulsed hybrid field emitter

    DOE Patents [OSTI]

    Sampayan, Stephen E. (Manteca, CA)

    1998-01-01

    A hybrid emitter exploits the electric field created by a rapidly depoled ferroelectric material. Combining the emission properties of a planar thin film diamond emitter with a ferroelectric alleviates the present technological problems associated with both types of emitters and provides a robust, extremely long life, high current density cathode of the type required by emerging microwave power generation, accelerator technology and display applications. This new hybrid emitter is easy to fabricate and not susceptible to the same failures which plague microstructure field emitter technology. Local electrode geometries and electric field are determined independently from those for optimum transport and brightness preservation. Due to the large amount of surface charge created on the ferroelectric, the emitted electrons have significant energy, thus eliminating the requirement for specialized phosphors in emissive flat-panel displays.

  10. Hybrid electroluminescent devices

    DOE Patents [OSTI]

    Shiang, Joseph John (Niskayuna, NY); Duggal, Anil Raj (Niskayuna, NY); Michael, Joseph Darryl (Schenectady, NY)

    2010-08-03

    A hybrid electroluminescent (EL) device comprises at least one inorganic diode element and at least one organic EL element that are electrically connected in series. The absolute value of the breakdown voltage of the inorganic diode element is greater than the absolute value of the maximum reverse bias voltage across the series. The inorganic diode element can be a power diode, a Schottky barrier diode, or a light-emitting diode.

  11. Remote hybrid power systems

    SciTech Connect (OSTI)

    Barley, C.D.; Winn, C.B. [Colorado State Univ., Fort Collins, CO (United States)

    1997-12-31

    This paper provides an overview of the emerging technology of remote, stand-alone electrical power systems featuring a renewable source (wind or photovoltaics [PV]) as well as a diesel generator, with or without an energy storage device. Other stand-alone power systems are discussed briefly, mainly to emphasize the domain of hybrid systems. The history of hybrid systems is reviewed, beginning with the first wind/diesel system in the late 1970s. Other topics include issues arising from the characteristics of diesel engine/generator sets; simple vs. complex systems; the various energy storage technologies that have been used or proposed; control strategies; modeling; optimization; and some {open_quotes}nuts & bolts{close_quotes} details. The bibliography includes over 130 references which are cited throughout the topical discussions. It is concluded that the technical feasibility of hybrid systems has been demonstrated through many prototype installations, and that areas for further improvements include higher reliability and more economical energy storage devices. 139 refs., 7 figs., 1 tab.

  12. Hybrid Computer Architectures Motivations for Research

    E-Print Network [OSTI]

    Kavi, Krishna

    Hybrid Computer Architectures Motivations for Research What Is a Hybrid Processor? Hybrid commercial hybrid chips provide fixed processing cores and Field Programmable Gate Array (FPGA) elements an Application Specific Integrated Service (ASIC) can provide. How Do We Use Them? Hybrid chips seem uniquely

  13. Hybrid solar lighting distribution systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2011-07-05

    A hybrid solar lighting distribution system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates all components.

  14. Hybrid solar lighting systems and components

    DOE Patents [OSTI]

    Muhs, Jeffrey D. (Lenoir City, TN); Earl, Dennis D. (Knoxville, TN); Beshears, David L. (Knoxville, TN); Maxey, Lonnie C. (Powell, TN); Jordan, John K. (Oak Ridge, TN); Lind, Randall F. (Lenoir City, TN)

    2007-06-12

    A hybrid solar lighting system and components having at least one hybrid solar concentrator, at least one fiber receiver, at least one hybrid luminaire, and a light distribution system operably connected to each hybrid solar concentrator and each hybrid luminaire. A controller operates each component.

  15. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    secrets, but the price of hybrid cars and trucks are betweenCosts of hybrid vehicles Depending on whether a car companydiesel-hybrid prototypes that attained 70 MPG (Green Car

  16. Issue 5: High Interest in Hybrid Cars

    E-Print Network [OSTI]

    Ong, Paul M.; Haselhoff, Kim

    2005-01-01

    2005). “High Interest in Hybrid Cars. ” SCS Fact Sheet, Vol.May 2005 High Interest in Hybrid Cars I NTRODUCTION PublicThe unique features of a hybrid car mean that it is more

  17. Hybrid Silicon Photonic Integrated Circuit Technology

    E-Print Network [OSTI]

    2013-01-01

    and J. E. Bowers, “Hybrid silicon evanescent devices,”and J. E. Bowers, “A hybrid AlGaInAs-silicon evanescentColdren, and J. E. Bowers, “Hybrid III/V sili- con photonic

  18. A hybrid tissue-engineered heart valve

    E-Print Network [OSTI]

    Alavi, SH; Kheradvar, A

    2015-01-01

    load-bearing component of the hybrid lea?et, and it shouldin the left ventricle. Hybrid tissue was also previouslyA Hybrid Tissue-Engineered Heart Valve S. Hamed Alavi, PhD,

  19. Hybrid Publicly Verifiable Computation James Alderman

    E-Print Network [OSTI]

    International Association for Cryptologic Research (IACR)

    Hybrid Publicly Verifiable Computation James Alderman , Christian Janson, Carlos Cid , and Jason introduce Hybrid PVC (HPVC) which, with a single setup stage, provides a flexible solution to outsourced for such systems. Keywords-- Hybrid Publicly Verifiable Computation, Verifiable Delegable Computation, Dual

  20. Hybrid Silicon Photonics for Optical Interconnects

    E-Print Network [OSTI]

    2011-01-01

    Promising Technology for the hybrid silicon laser in 2007.Electrically pumped hybrid AlGaInAs-silicon evanescentA. Yariv, “Electrically pumped hybrid evanescent Si/InGaAsP

  1. Hybrid classical-quantum formulations ask for hybrid notions

    E-Print Network [OSTI]

    Carlos Barceló; Raúl Carballo-Rubio; Luis J. Garay; Ricardo Gómez-Escalante

    2013-01-28

    We reappraise some of the hybrid classical-quantum models proposed in the literature with the goal of retrieving some of their common characteristics. In particular, first, we analyze in detail the Peres-Terno argument regarding the inconsistency of hybrid quantizations of the Sudarshan type. We show that to accept such hybrid formalism entails the necessity of dealing with additional degrees of freedom beyond those in the straight complete quantization of the system. Second, we recover a similar enlargement of degrees of freedom in the so-called statistical hybrid models. Finally, we use Wigner's quantization of a simple model to illustrate how in hybrid systems the subsystems are never purely classical or quantum. A certain degree of quantumness (classicality) is being exchanged between the different sectors of the theory, which in this particular unphysical toy model makes them undistinguishable.

  2. Hybrid conformal field theories

    E-Print Network [OSTI]

    Marco Bertolini; Ilarion V. Melnikov; M. Ronen Plesser

    2013-07-26

    We describe a class of (2,2) superconformal field theories obtained by fibering a Landau-Ginzburg orbifold CFT over a compact Kaehler base manifold. While such models are naturally obtained as phases in a gauged linear sigma model, our construction is independent of such an embedding. We discuss the general properties of such theories and present a technique to study the massless spectrum of the associated heterotic compactification. We test the validity of our method by applying it to hybrid phases of linear models and comparing spectra among the phases.

  3. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    Source: Velocity Suite, Global Energy Data Advanced Coal Wind Hybrid: Economic Analysis 6.3.2 Comparison with Non-hybrid Competing

  4. Advanced Hybrid Water Heater using Electrochemical Compressor...

    Energy Savers [EERE]

    Advanced Hybrid Water Heater using Electrochemical Compressor Advanced Hybrid Water Heater using Electrochemical Compressor Xergy is using its Electro Chemical Compression (ECC)...

  5. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic29 Figure 9. Sensitivity to Coal

  6. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Print Wednesday, 26 August 2009 00:00 Rotaxanes are...

  7. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    of Figures Figure ES-1. Advanced Coal Wind Hybrid: Basicviii Figure 1. Advanced-Coal Wind Hybrid: Basic21 Figure 6. Comparison of ACWH and CCGT-Wind

  8. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    century. Hybrid electric vehicles (HEVs) reduce emissionsas plug-in HEVs and full electric vehicles to market. In theon their design, hybrid electric vehicles employ electric

  9. Hybrid spread spectrum radio system

    DOE Patents [OSTI]

    Smith, Stephen F. (London, TN) [London, TN; Dress, William B. (Camas, WA) [Camas, WA

    2010-02-09

    Systems and methods are described for hybrid spread spectrum radio systems. A method, includes receiving a hybrid spread spectrum signal including: fast frequency hopping demodulating and direct sequence demodulating a direct sequence spread spectrum signal, wherein multiple frequency hops occur within a single data-bit time and each bit is represented by chip transmissions at multiple frequencies.

  10. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R00 Date: 15 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) August 2005 or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R00 DESIGN

  11. Design Criteria Document Hybrid Spectrometer

    E-Print Network [OSTI]

    Johnson, Peter D.

    Design Criteria Document for the Hybrid Spectrometer (HYSPEC) SNS SING14B-00-DC0001-R01 Date: 1 contract DE-AC05-00OR22725 #12;DESIGN CRITERIA DOCUMENT FOR THE HYBRID SPECTROMETER (HYSPEC) Mark Hagen or reflect those of the United States government or any agency thereof. #12;SING14B-00-DC0001-R01 DESIGN

  12. Massive Hybrid Stars with Strangeness

    E-Print Network [OSTI]

    Tatsuyuki Takatsuka; Tetsuo Hatsuda; Kota Masuda

    2014-02-19

    How massive the hybrid stars could be is discussed by a "3-window model" proposed from a new strategy to construct the equation of state with hadron-quark transition. It is found that hybrid stars have a strong potentiality to generate a large mass compatible with two-solar-mass neutron star observations.

  13. Essays On Hybrid Bundle Pricing 

    E-Print Network [OSTI]

    Meyer, Jeffrey Dean

    2011-10-21

    model of optimal pricing for hybrid bundles by a monopolist. My results show that an increase in quality variability of the service is generally associated with a higher optimal hybrid bundle price and a lower optimal price of the good, but lower overall...

  14. Performance Evaluation of Lower-Energy Energy Storage Alternatives for Full-Hybrid Vehicles; NREL (National Renewable Energy Laboratory)

    SciTech Connect (OSTI)

    Gonder, J.; Cosgrove, J.; Pesaran, A.

    2014-02-11

    Automakers have been mass producing hybrid electric vehicles (HEVs) for well over a decade, and the technology has proven to be very effective at reducing per-vehicle fuel use. However, the incremental cost of HEVs such as the Toyota Prius or Ford Fusion Hybrid remains several thousand dollars higher than the cost of comparable conventional vehicles, which has limited HEV market penetration. The b b b b battery energy storage device is typically the component with the greatest contribution toward this cost increment, so significant cost reductions/performance improvements to the energy storage system (ESS) can correspondingly improve the vehicle-level cost/benefit relationship. Such an improvement would in turn lead to larger HEV market penetration and greater aggregate fuel savings. The United States Advanced Battery Consortium (USABC) and the U.S. Department of Energy (DOE) Energy Storage Program managers asked the National Renewable Energy Laboratory (NREL) to collaborate with a USABC Workgroup and analyze the trade-offs between vehicle fuel economy and reducing the decade-old minimum energy requirement for power-assist HEVs. NREL’s analysis showed that significant fuel savings could still be delivered from an ESS with much lower energy storage than the previous targets, which prompted USABC to issue a new set of lower-energy ESS (LEESS) targets that could be satisfied by a variety of technologies. With support from DOE, NREL has developed an HEV test platform for in-vehicle performance and fuel economy validation testing of the hybrid system using such LEESS devices. This presentation describes development of the vehicle test platform, and laboratory as well as in-vehicle evaluation results with alternate energy storage configurations as compared to the production battery system. The alternate energy storage technologies considered include lithium-ion capacitors -- i.e., asymmetric electrochemical energy storage devices possessing one electrode with battery-type characteristics (lithiated graphite) and one with ultracapacitor-type characteristics (carbon) -- and electrochemical double-layer capacitors.

  15. Wankel engine for hybrid powertrain

    SciTech Connect (OSTI)

    Butti, A.; Site, V.D.

    1995-12-31

    The Wankel engine is suited to be used to drive hybrid propulsion systems. The main disadvantage of hybrid propulsion systems is the complexity that causes a high weight and large dimensions. For these reason hybrid systems are more suitable for large size vehicle (buses, vans) rather than for small passenger cars. A considerable reduction of hybrid systems weight and dimensions can be obtained using a Wankel rotary engine instead of a conventional engine. The Wankel engine is light, compact, simple, and produces low noise and low vibrations. Therefore a Wankel engine powered hybrid system is suited to be used on small cars. In this paper a 1,000 kg parallel hybrid car with continuously variable transmission and a 6,000 kg series hybrid minibus both equipped with Wankel engines are considered. The Wankel engine works at steady state to minimize fuel consumption and exhaust emissions. The simulation of the behavior of these two vehicles during a ECE + EUDC test cycle is presented in order to evaluate the performances of the systems.

  16. Hybrid powertrain controller

    DOE Patents [OSTI]

    Jankovic, Miroslava (Birmingham, MI); Powell, Barry Kay (Belleville, MI)

    2000-12-26

    A hybrid powertrain for a vehicle comprising a diesel engine and an electric motor in a parallel arrangement with a multiple ratio transmission located on the torque output side of the diesel engine, final drive gearing connecting drivably the output shaft of transmission to traction wheels of the vehicle, and an electric motor drivably coupled to the final drive gearing. A powertrain controller schedules fuel delivered to the diesel engine and effects a split of the total power available, a portion of the power being delivered by the diesel and the balance of the power being delivered by the motor. A shifting schedule for the multiple ratio transmission makes it possible for establishing a proportional relationship between accelerator pedal movement and torque desired at the wheels. The control strategy for the powertrain maintains drivability of the vehicle that resembles drivability of a conventional spark ignition vehicle engine powertrain while achieving improved fuel efficiency and low exhaust gas emissions.

  17. Hybrid powertrain system

    DOE Patents [OSTI]

    Grillo, Ricardo C.; O'Neil, Walter K.; Preston, David M.

    2005-09-20

    A hybrid powertrain system is provided that includes a first prime mover having a rotational output, a second prime mover having a rotational output, and a transmission having a main shaft supporting at least two main shaft gears thereon. The transmission includes a first independent countershaft drivingly connected to the first prime mover and including at least one ratio gear supported thereon that meshes with a respective main shaft gear. A second independent countershaft is drivingly connected to the second prime mover and includes at least one ratio gear supported thereon that meshes with a respective main shaft gear. The ratio gears on the first and second countershafts cooperate with the main shaft gears to provide at least one gear ratio between the first and second countershafts and the main shaft. A shift control mechanism selectively engages and disengages the first and second countershafts for rotation with the main shaft.

  18. Hybrid vehicle control

    DOE Patents [OSTI]

    Shallvari, Iva; Velnati, Sashidhar; DeGroot, Kenneth P.

    2015-07-28

    A method and apparatus for heating a catalytic converter's catalyst to an efficient operating temperature in a hybrid electric vehicle when the vehicle is in a charge limited mode such as e.g., the charge depleting mode or when the vehicle's high voltage battery is otherwise charge limited. The method and apparatus determine whether a high voltage battery of the vehicle is incapable of accepting a first amount of charge associated with a first procedure to warm-up the catalyst. If it is determined that the high voltage battery is incapable of accepting the first amount of charge, a second procedure with an acceptable amount of charge is performed to warm-up the catalyst.

  19. Hybrid dark energy

    E-Print Network [OSTI]

    J. S. Alcaniz; R. Silva; F. C. Carvalho; Zong-Hong Zhu

    2008-07-16

    Extending previous results [Phys. Rev. Lett. 97, 081301 (2006)], we explore the cosmological implications of a new quintessence scenario driven by a slow rolling homogeneous scalar field whose equation of state behaved as freezing over the entire cosmic evolution, is approaching -1 today, but will become thawing in the near future, thereby driving the Universe to an eternal deceleration. We argue that such a mixed behavior, named \\emph{hybrid}, may reconcile the slight preference of current observational data for freezing potentials with the impossibility of defining observables in the String/M-theory context due to the existence of a cosmological event horizon in asymptotically de Sitter universes as, e.g., pure freezing scenarios.

  20. Nonminimally coupled hybrid inflation

    SciTech Connect (OSTI)

    Koh, Seoktae [Center for Quantum Spacetime, Sogang University, Shinsu-dong 1, Mapo-gu, 121-742, Seoul (Korea, Republic of); Minamitsuji, Masato [Department of Physics, Graduate School of Science and Technology, Kwansei Gakuin University, Sanda 669-1337 (Japan)

    2011-02-15

    We discuss the hybrid inflation model where the inflaton field is nonminimally coupled to gravity. In the Jordan frame, the potential contains {phi}{sup 4} term as well as terms in the original hybrid inflation model. In our model, inflation can be classified into the type (I) and the type (II). In the type (I), inflation is terminated by the tachyonic instability of the waterfall field, while in the type (II) by the violation of slow-roll conditions. In our model, the reheating takes place only at the true minimum and even in the case (II) finally the tachyonic instability occurs after the termination of inflation. For a negative nonminimal coupling, inflation takes place in the vacuum-dominated region, in the large field region, or near the local minimum/maximum. Inflation in the vacuum-dominated region becomes either the type (I) or (II), resulting in a blue or red spectrum of the curvature perturbations, respectively. Inflation around the local maximum can be either the type (I) or the type (II), which results in the red spectrum of the curvature perturbations, while around the local minimum it must be the type (I), which results in the blue spectrum. In the large field region, to terminate inflation, potential in the Einstein frame must be positively tilted, always resulting in the red spectrum. We then numerically solve the equations of motion to investigate the whole dynamics of inflaton and confirm that the spectrum of curvature perturbations changes from red to blue ones as scales become smaller.

  1. Hybrid Systems: From Verification to Falsification

    E-Print Network [OSTI]

    Kavraki, Lydia E.

    Hybrid Systems: From Verification to Falsification Erion Plaku, Lydia E. Kavraki, and Moshe Y}@cs.rice.edu Abstract. We propose HyDICE, Hybrid DIscrete Continuous Exploration, a multi-layered approach for hybrid. The discrete search uses the discrete transitions of the hybrid system and coarse-grained decompositions

  2. Hybrid Abstractions that Preserve Timed Languages

    E-Print Network [OSTI]

    Pappas, George J.

    Hybrid Abstractions that Preserve Timed Languages Paulo Tabuada1 and George J. Pappas2 1 Instituto@ee.upenn.edu Abstract. In this paper we consider the problem of extracting an ab- straction from a hybrid control system that determine when trajectories of the original hybrid system can be generated by the abstracted hybrid system

  3. Hybrid Geometric Reduction of Hybrid Systems Aaron D. Ames and Shankar Sastry

    E-Print Network [OSTI]

    Sastry, S. Shankar

    Hybrid Geometric Reduction of Hybrid Systems Aaron D. Ames and Shankar Sastry Abstract-- This paper presents a unifying framework in which to carry out the hybrid geometric reduction of hybrid systems, generalizing classical reduction to a hybrid setting. I. INTRODUCTION The reduction of mechanical systems

  4. Hybrid Charmonium and the $?-?$ Puzzle

    E-Print Network [OSTI]

    Leonard S. Kisslinger; Diana Parno; Seamus Riordan

    2008-11-21

    Using the method of QCD Sum Rules, we estimate the energy of the lowest hybrid Charmonium state, and find it to be at the energy of the $\\Psi'(2S)$ state, about 600 Mev above the $J/\\Psi(1S)$ state. Since our solution is not consistent with a pure hybrid at this energy, we conclude that the $\\Psi'(2S)$ state is probably an admixed $c \\bar{c}$ and hybrid $c \\bar{c}g$ state. From this conjecture we find a possible explanation of the famous $\\rho-\\pi$ puzzle.

  5. Hybrid tomography for conductivity imaging

    E-Print Network [OSTI]

    T. Widlak; O. Scherzer

    2012-03-20

    Hybrid imaging techniques utilize couplings of physical modalities -- they are called hybrid, because, typically, the excitation and measurement quantities belong to different modalities. Recently there has been an enormous research interest in this area because these methods promise very high resolution. In this paper we give a review on hybrid tomography methods for \\emph{electrical conductivity} imaging. The reviewed imaging methods utilize couplings between electric, magnetic and ultrasound modalities. By this it is possible to perform high-resolution electrical impedance imaging and to overcome the low-resolution problem of electric impedance tomography.

  6. Hybrid Vehicle Program. Final report

    SciTech Connect (OSTI)

    None

    1984-06-01

    This report summarizes the activities on the Hybrid Vehicle Program. The program objectives and the vehicle specifications are reviewed. The Hybrid Vehicle has been designed so that maximum use can be made of existing production components with a minimum compromise to program goals. The program status as of the February 9-10 Hardware Test Review is presented, and discussions of the vehicle subsystem, the hybrid propulsion subsystem, the battery subsystem, and the test mule programs are included. Other program aspects included are quality assurance and support equipment. 16 references, 132 figures, 47 tables.

  7. Hybridization and the Typological Paradigm 

    E-Print Network [OSTI]

    Carlson, Charles

    2012-02-14

    chemical cues, whether conspecifics in their immediate vicinity have high parasite loads and also whether this has an effect on mating and association behavior toward both conspecific and hybrid mates. Our hypothesis being that females will have greater...

  8. Compositional Variation Within Hybrid Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    of the metal-alloy tip component of a hybrid nanostructure with that of free-standing metal-alloy nanoparticles. Transmission electron microscopy (TEM) image of PtCo-CdS...

  9. Hybrid Zero-capacity Channels

    E-Print Network [OSTI]

    Sergii Strelchuk; Jonathan Oppenheim

    2012-07-04

    There are only two known kinds of zero-capacity channels. The first kind produces entangled states that have positive partial transpose, and the second one - states that are cloneable. We consider the family of 'hybrid' quantum channels, which lies in the intersection of the above classes of channels and investigate its properties. It gives rise to the first explicit examples of the channels, which create bound entangled states that have the property of being cloneable to the arbitrary finite number of parties. Hybrid channels provide the first example of highly cloneable binding entanglement channels, for which known superactivation protocols must fail - superactivation is the effect where two channels each with zero quantum capacity having positive capacity when used together. We give two methods to construct a hybrid channel from any binding entanglement channel. We also find the low-dimensional counterparts of hybrid states - bipartite qubit states which are extendible and possess two-way key.

  10. Hybrid Fuel Cell Technology Overview

    SciTech Connect (OSTI)

    None available

    2001-05-31

    For the purpose of this STI product and unless otherwise stated, hybrid fuel cell systems are power generation systems in which a high temperature fuel cell is combined with another power generating technology. The resulting system exhibits a synergism in which the combination performs with an efficiency far greater than can be provided by either system alone. Hybrid fuel cell designs under development include fuel cell with gas turbine, fuel cell with reciprocating (piston) engine, and designs that combine different fuel cell technologies. Hybrid systems have been extensively analyzed and studied over the past five years by the Department of Energy (DOE), industry, and others. These efforts have revealed that this combination is capable of providing remarkably high efficiencies. This attribute, combined with an inherent low level of pollutant emission, suggests that hybrid systems are likely to serve as the next generation of advanced power generation systems.

  11. Global optimization of hybrid systems

    E-Print Network [OSTI]

    Lee, Cha Kun

    2006-01-01

    Systems that exhibit both discrete state and continuous state dynamics are called hybrid systems. In most nontrivial cases, these two aspects of system behavior interact to such a significant extent that they cannot be ...

  12. Hybrid particles and associated methods

    SciTech Connect (OSTI)

    Fox, Robert V; Rodriguez, Rene; Pak, Joshua J; Sun, Chivin

    2015-02-10

    Hybrid particles that comprise a coating surrounding a chalcopyrite material, the coating comprising a metal, a semiconductive material, or a polymer; a core comprising a chalcopyrite material and a shell comprising a functionalized chalcopyrite material, the shell enveloping the core; or a reaction product of a chalcopyrite material and at least one of a reagent, heat, and radiation. Methods of forming the hybrid particles are also disclosed.

  13. Directed mammalian gene regulatory networks using expression and comparative genomic hybridization microarray data from radiation hybrids

    E-Print Network [OSTI]

    2009-01-01

    generation whole genome-radiation hybrid map spanning theA high- resolution radiation hybrid map of the human genomeRecently we have used radiation hybrids to map loci based on

  14. Effects of Vehicle Image in Gasoline-Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Heffner, Reid R.; Kurani, Ken; Turrentine, Tom

    2005-01-01

    of Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidof Vehicle Image in Gasoline-Hybrid Electric Vehicles Reidhigh demand for gasoline-hybrid electric vehicles (HEVs)?

  15. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    The parallel hybrid passenger car (VW Golf) combined an EDLCpassenger cars using the ultracapacitors in micro-hybrid,passenger car using both carbon/carbon and hybrid carbon

  16. Hybrid Traffic Data Collection Roadmap: Objectives and Methods

    E-Print Network [OSTI]

    Bayen, Alexandre

    2013-01-01

    information environment. Hybrid Traffic Data CollectionBibliography Bibliography Hybrid Traffic Data Collection19, no. 1, p. 15–25, 2003. Hybrid Traffic Data Collection

  17. System Simulations of Hybrid Electric Vehicles with Focus on...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    System Simulations of Hybrid Electric Vehicles with Focus on Emissions System Simulations of Hybrid Electric Vehicles with Focus on Emissions Comparative simulations of hybrid...

  18. Are batteries ready for plug-in hybrid buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Kurani, Kenneth S.; Burke, Andrew

    2008-01-01

    and Impacts of Hybrid Electric Vehicle Options for Compactof Plug-In Hybrid Electric Vehicles, Volume 1: Nationwideand Impacts of Hybrid Electric Vehicle Options, EPRI, Palo

  19. Are Batteries Ready for Plug-in Hybrid Buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Kurani, Kenneth S; Burke, Andy

    2009-01-01

    and Impacts of Hybrid Electric Vehicle Options for Compactof Plug-In Hybrid Electric Vehicles, Volume 1: Nationwideand Impacts of Hybrid Electric Vehicle Options, EPRI, Palo

  20. Are Batteries Ready for Plug-in Hybrid Buyers?

    E-Print Network [OSTI]

    Axsen, Jonn; Burke, Andy; Kurani, Kenneth S

    2010-01-01

    and impacts of hybrid electric vehicle options for compactof plug-in hybrid electric vehicles, vol. 1: nationwideimpacts of hybrid electric vehicle options. Report #1000349,

  1. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    in batteries, ultracapacitors, fuel cells and hybrid vehicleBattery, Hybrid and Fuel Cell Electric Vehicle SymposiumBattery, Hybrid and Fuel Cell Electric Vehicle Symposium

  2. Hybrid power source

    DOE Patents [OSTI]

    Singh, Harmohan N.

    2012-06-05

    A hybrid power system is comprised of a high energy density element such as a fuel-cell and high power density elements such as a supercapacitor banks. A DC/DC converter electrically connected to the fuel cell and converting the energy level of the energy supplied by the fuel cell. A first switch is electrically connected to the DC/DC converter. First and second supercapacitors are electrically connected to the first switch and a second switch. A controller is connected to the first switch and the second switch, monitoring charge levels of the supercapacitors and controls the switching in response to the charge levels. A load is electrically connected to the second switch. The first switch connects the DC/DC converter to the first supercapacitor when the second switch connects the second supercapacitor to the load. The first switch connects the DC/DC converter to the second supercapacitor when the second switch connects the first supercapacitor to the load.

  3. Rotordynamic evaluation of hybrid damper seals with metal mesh elements 

    E-Print Network [OSTI]

    Bhamidipati, Laxmi Narasimha Kameswara Sarma

    2003-01-01

    Metal mesh hybrid damper seals (MHS) were proposed to be an alternative for brush hybrid pocket damper seals (PDS) in turbomachinery. The metal mesh hybrid damper seal is a hybrid of the pocket damper seal and the metal ...

  4. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    the high efficiency, high voltage hybrid tandem solar celltarget efficiency of 30%, the hybrid tandem solar cells have

  5. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    in series hybrids using gasoline and diesel engines anddiesel powered buses and consistently better fuel economy than hybrid

  6. Hybrid Ventilation Optimization and Control Research and Development...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Ventilation Optimization and Control Research and Development Hybrid Ventilation Optimization and Control Research and Development Credit: Massachusetts Institute of...

  7. Conditions when hybridization might predispose populations

    E-Print Network [OSTI]

    COMMENTARY Conditions when hybridization might predispose populations for adaptive radiation O (Sch- warzer et al., 2012), perhaps just as a consequence of many young species in geographical et al., 2011; Genner & Turner, 2012). Whether these species radiations happen despite hybridization

  8. Hybrid solar-fossil fuel power generation

    E-Print Network [OSTI]

    Sheu, Elysia J. (Elysia Ja-Zeng)

    2012-01-01

    In this thesis, a literature review of hybrid solar-fossil fuel power generation is first given with an emphasis on system integration and evaluation. Hybrid systems are defined as those which use solar energy and fuel ...

  9. CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS

    E-Print Network [OSTI]

    Collins, Gary S.

    CONDUCTIVE POLYCARBONATE NANOCOMPOSITES with HYBRID NANOFILLERS Catherine Smith, Brooks Lively, Wei of polymers. Emerging technologies have demonstrated the crucial need for highly conductive polymer combination between polycarbonate (PC) and hybrid concentrations of CNT and GNP nanofillers was investigated

  10. Hybrid Cotangent Bundle Reduction of Simple Hybrid Mechanical Systems with Symmetry

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Cotangent Bundle Reduction of Simple Hybrid Mechanical Systems with Symmetry Aaron D. Ames the notion of a simple hybrid mechanical system, which generalizes mechanical systems to include unilateral constraints on the configuration space. From such a system we obtain, explicitly, a simple hybrid system

  11. Are hybrid species more fit than ancestral parent species in the current hybrid species habitats?

    E-Print Network [OSTI]

    Rieseberg, Loren

    Are hybrid species more fit than ancestral parent species in the current hybrid species habitats? L Columbia, Vancouver, BC, Canada Introduction Hybridization is receiving renewed attention as an important). For homoploid hybridization in plants, where chromosome number remains the same, models and empirical evi- dence

  12. Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM

    E-Print Network [OSTI]

    Hybrid Zones and Sexual Selection 503 HYBRID ZONES AND SEXUAL SELECTION: INSIGHTS FROM THE AWASH BABOON HYBRID ZONE (Papio hamadryas anubis x P. h. hamadryas) Thore J. Bergman and Jacinta C. Beehner, have focused on the impact of sexual selection on populations of naturally occurring hybrid animals

  13. Hybrid Routhian Reduction of Lagrangian Hybrid Systems Aaron D. Ames and Shankar Sastry

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Routhian Reduction of Lagrangian Hybrid Systems Aaron D. Ames and Shankar Sastry Department,sastry}@eecs.berkeley.edu Abstract-- This paper extends Routhian reduction to a hybrid setting, i.e., to systems that display both with unilateral constraints on the set of admissible configurations. This naturally yields the notion of a hybrid

  14. Modeling and Analysis ofModeling and Analysis of Hybrid Control SystemsHybrid Control Systems

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    Modeling and Analysis ofModeling and Analysis of Hybrid Control SystemsHybrid Control Systems Karl.kth.se/~kallej MOVEP 2006, Bordeaux, France Karl H. Johansson, Hybrid control systems, MOVEP, Bordeaux on commands and autonomous actions #12;Karl H. Johansson, Hybrid control systems, MOVEP, Bordeaux, 2006

  15. Helping HAN for hybrid rockets

    SciTech Connect (OSTI)

    Ramohalli, K.; Dowler, W.

    1995-01-01

    Hydroxyl amine nitrate (HAN) is a powerful oxidizer for hybrid rocket flight motors. Miscible with water up to 95% by mass, it also has high density and has been extensively characterized for materials compatibility, safety, transportation, storage and handling. Before any serious attempt to use the proposed oxidizer in hybrids, though, the usual performance figures must first be obtained. The simplest are time-independent, equilibrium rocket performance numbers that include chamber temperature, temperature at the nozzle throat, and key species in the exhaust. These numbers must be followed by several other important performance evaluation, including burning rates, pressure dependence, susceptibility to instabilities and temperature sensitivity.

  16. Plug-In Demo Charges up Clean Cities Coalitions

    Broader source: Energy.gov [DOE]

    Clean Cities Coordinators across the country highlight the benefits of plug-in hybrids and help collect valuable usage data as part of a demonstration project for the upcoming plug-in hybrid model of the Toyota Prius.

  17. Fact #815: February 3, 2014 Global Sales of Top 10 Plug-In Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    sales overall and led among plug-in hybrid vehicles with sales of about 25,000. As a proportion of sales, the Nissan Leaf and Toyota Prius Plug-in hybrid had the most even...

  18. Distributed Theorem Proving for Distributed Hybrid Systems

    E-Print Network [OSTI]

    Platzer, André

    system with a varying number of arbitrarily many cars. 1 Introduction Hybrid systems with joint discrete a multi-agent system, e.g., distributed car control systems. Such systems form distributed hybrid systemsDistributed Theorem Proving for Distributed Hybrid Systems David W. Renshaw, Sarah M. Loos

  19. Hybrid Signcryption Schemes With Outsider Security

    E-Print Network [OSTI]

    Dent, Alexander W.

    Hybrid Signcryption Schemes With Outsider Security (Extended Abstract) Alexander W. Dent.dent@rhul.ac.uk Abstract. This paper expands the notion of a KEM­DEM hybrid en- cryption scheme to the signcryption setting by introducing the notion of a signcryption KEM, a signcryption DEM and a hybrid signcryption scheme. We present

  20. Hybrid Ockhamist Temporal Logic Patrick Blackburn

    E-Print Network [OSTI]

    Goranko, Valentin

    Hybrid Ockhamist Temporal Logic Patrick Blackburn INRIA, Lorraine Campus Scientifique, BP 239 Nancy Johannesburg, South Africa vfg@na.rau.ac.za Abstract We introduce hybrid Ockhamist temporal logic, which combines the mechanisms of hybrid logic with Ockhamist semantics by employing nominals, satisfaction

  1. Hybrid Diverter Sheath Model Jeff Hammel

    E-Print Network [OSTI]

    Wurtele, Jonathan

    Hybrid Diverter Sheath Model Jeff Hammel Plasma Theory and Simulation Group APS ­ Division using a particle-fluid hybrid model. Electrons are modeled as an inertia-less (Boltzmann) fluid gyrokinetic code. The modeling methodology for the iterative nonlinear solver is presented. The hybrid model

  2. Hybrid Model Structures Aaron David Ames

    E-Print Network [OSTI]

    Ames, Aaron

    Hybrid Model Structures by Aaron David Ames B.A. (University of St. Thomas) 2001 B.S. (University of California, Berkeley Fall 2006 #12;Hybrid Model Structures Copyright 2006 by Aaron David Ames #12;Abstract Hybrid Model Structures by Aaron David Ames Masters of Arts in Mathematics University of California

  3. Hybrid organicinorganic materials for photonic applications

    E-Print Network [OSTI]

    Gilchrist, James F.

    Hybrid organic­inorganic materials for photonic applications Partha P. Banerjee,1,* Dean R. Evans,2 18015, USA *pbanerjee1@udayton.edu Abstract: This novel joint feature issue on "Hybrid organic that this feature issue encourages and stimulates further research to into hybrid materials with enhanced linear

  4. Hybrid organicinorganic materials for novel photonic applications

    E-Print Network [OSTI]

    Gilchrist, James F.

    Hybrid organic­inorganic materials for novel photonic applications Partha P. Banerjee,1, * Dean R. ID 192915); published 31 July 2013 This novel joint feature issue on "Hybrid organic that this feature issue encourages and stim- ulates further research into hybrid materials with enhanced linear

  5. ADVANCED HYBRID PARTICULATE COLLECTOR

    SciTech Connect (OSTI)

    Ye Zhuang; Stanley J. Miller; Michelle R. Olderbak; Rich Gebert

    2001-12-01

    A new concept in particulate control, called an advanced hybrid particulate collector (AHPC), is being developed under funding from the U.S. Department of Energy. The AHPC combines the best features of electrostatic precipitators (ESPs) and baghouses in an entirely novel manner. The AHPC concept combines fabric filtration and electrostatic precipitation in the same housing, providing major synergism between the two methods, both in the particulate collection step and in transfer of dust to the hopper. The AHPC provides ultrahigh collection efficiency, overcoming the problem of excessive fine-particle emissions with conventional ESPs, and solves the problem of reentrainment and re-collection of dust in conventional baghouses. Phase I of the development effort consisted of design, construction, and testing of a 5.7-m{sup 3}/min (200-acfm) working AHPC model. Results from both 8-hr parametric tests and 100-hr proof-of-concept tests with two different coals demonstrated excellent operability and greater than 99.99% fine-particle collection efficiency. Since all of the developmental goals of Phase I were met, the approach was scaled up in Phase II to a size of 255 m{sup 3}/min (9000 acfm) (equivalent in size to 2.5 MW) and was installed on a slipstream at the Big Stone Power Plant. For Phase II, the AHPC at Big Stone Power Plant was operated continuously from late July 1999 until mid-December 1999. The Phase II results were highly successful in that ultrahigh particle collection efficiency was achieved, pressure drop was well controlled, and system operability was excellent. For Phase III, the AHPC was modified into a more compact configuration, and components were installed that were closer to what would be used in a full-scale commercial design. The modified AHPC was operated from April to July 2000. While operational results were acceptable during this time, inspection of bags in the summer of 2000 revealed some membrane damage to the fabric that appeared to be caused by electrical effects. Subsequently, extensive theoretical, bench-scale, and pilot-scale investigations were completed to find an approach to prevent bag damage without compromising AHPC performance. Results showed that the best bag protection and AHPC performance were achieved by using a perforated plate installed between the discharge electrodes and bags. This perforated-plate design was then installed in the 2.5-MW AHPC at Big Stone Power Plant in Big Stone City, South Dakota, and the AHPC was operated from March to June 2001. Results showed that the perforated-plate design solved the bag damage problem and offered even better AHPC performance than the previous design. All of the AHPC performance goals were met, including ultrahigh collection efficiency, high air-to-cloth ratio, reasonable pressure drop, and long bag-cleaning interval.

  6. Models for asymmetric hybrid brane

    E-Print Network [OSTI]

    D. Bazeia; M. A. Marques; R. Menezes

    2015-10-15

    We deal with relativistic models described by a single real scalar field, searching for topological structures that behave asymmetrically, connecting minima with distinct profile. We use such features to build a new braneworld scenario, in which the source scalar field contributes to generate asymmetric hybrid brane.

  7. Hybrid mesons and auxiliary fields

    E-Print Network [OSTI]

    Fabien Buisseret; Vincent Mathieu

    2006-09-29

    Hybrid mesons are exotic mesons in which the color field is not in the ground state. Their understanding deserves interest from a theoretical point of view, because it is intimately related to nonperturbative aspects of QCD. Moreover, it seems that some recently detected particles, such as the $\\pi_1(1600)$ and the Y(4260), are serious hybrid candidates. In this work, we investigate the description of such exotic hadrons by applying the auxiliary fields technique to the widely used spinless Salpeter Hamiltonian with appropriate linear confinement. Instead of the usual numerical resolution, this technique allows to find simplified analytical mass spectra and wave functions of the Hamiltonian, which still lead to reliable qualitative predictions. We analyse and compare two different descriptions of hybrid mesons, namely a two-body $q\\bar q$ system with an excited flux tube, or a three-body $q\\bar q g$ system. We also compute the masses of the $1^{-+}$ hybrids. Our results are shown to be in satisfactory agreement with lattice QCD and other effective models.

  8. Hybrid chirped pulse amplification system

    DOE Patents [OSTI]

    Barty, Christopher P.; Jovanovic, Igor

    2005-03-29

    A hybrid chirped pulse amplification system wherein a short-pulse oscillator generates an oscillator pulse. The oscillator pulse is stretched to produce a stretched oscillator seed pulse. A pump laser generates a pump laser pulse. The stretched oscillator seed pulse and the pump laser pulse are directed into an optical parametric amplifier producing an optical parametric amplifier output amplified signal pulse and an optical parametric amplifier output unconverted pump pulse. The optical parametric amplifier output amplified signal pulse and the optical parametric amplifier output laser pulse are directed into a laser amplifier producing a laser amplifier output pulse. The laser amplifier output pulse is compressed to produce a recompressed hybrid chirped pulse amplification pulse.

  9. Hybrid Inflation Exit through Tunneling

    E-Print Network [OSTI]

    Bjorn Garbrecht; Thomas Konstandin

    2006-10-24

    For hybrid inflationary potentials, we derive the tunneling rate from field configurations along the flat direction towards the waterfall regime. This process competes with the classically rolling evolution of the scalar fields and needs to be strongly subdominant for phenomenologically viable models. Tunneling may exclude models with a mass scale below 10^12 GeV, but can be suppressed by small values of the coupling constants. We find that tunneling is negligible for those models, which do not require fine tuning in order to cancel radiative corrections, in particular for GUT-scale SUSY inflation. In contrast, electroweak scale hybrid inflation is not viable, unless the inflaton-waterfall field coupling is smaller than approximately 10^-11.

  10. Hybrid quantum repeater with encoding

    E-Print Network [OSTI]

    Nadja K. Bernardes; Peter van Loock

    2012-11-02

    We present an encoded hybrid quantum repeater scheme using qubit-repetition and Calderbank-Shor-Steane codes. For the case of repetition codes, we propose an explicit implementation of the quantum error-correction protocol. Moreover, we analyze the entangled-pair distribution rate for the hybrid quantum repeater with encoding and we clearly identify a triple trade-off between the efficiency of the codes, the memory decoherence time, and the local gate errors. Finally, we show that in the presence of reasonable imperfections our system can achieve rates of roughly 24 Hz per memory for 20 km repeater spacing, a final distance of 1280 km, and a final fidelity of about 0.95.

  11. Planar slot coupled microwave hybrid

    DOE Patents [OSTI]

    Petter, Jeffrey K. (Williston, VT)

    1991-01-01

    A symmetrical 180.degree. microwave hybrid is constructed by opening a slot line in a ground plane below a conducting strip disposed on a dielectric substrate, creating a slot coupled conductor. Difference signals propagating on the slot coupled conductor are isolated on the slot line leaving sum signals to propagate on the microstrip. The difference signal is coupled from the slot line onto a second microstrip line for transmission to a desired location. The microstrip branches in a symmetrical fashion to provide the input/output ports of the 180.degree. hybrid. The symmetry of the device provides for balance and isolation between sum and difference signals, and provides an advantageous balance between the power handling capabilities and the bandwidth of the device.

  12. Hybrid metric-Palatini gravity

    E-Print Network [OSTI]

    Capozziello, Salvatore; Koivisto, Tomi S; Lobo, Francisco S N; Olmo, Gonzalo J

    2015-01-01

    Recently, the phenomenology of f(R) gravity has been scrutinized motivated by the possibility to account for the self-accelerated cosmic expansion without invoking dark energy sources. Besides, this kind of modified gravity is capable of addressing the dynamics of several self-gravitating systems alternatively to the presence of dark matter. It has been established that both metric and Palatini versions of these theories have interesting features but also manifest severe and different downsides. A hybrid combination of theories, containing elements from both these two formalisms, turns out to be also very successful accounting for the observed phenomenology and is able to avoid some drawbacks of the original approaches. This article reviews the formulation of this hybrid metric-Palatini approach and its main achievements in passing the local tests and in applications to astrophysical and cosmological scenarios, where it provides a unified approach to the problems of dark energy and dark matter.

  13. Superheat Control: A Hybrid Approach 

    E-Print Network [OSTI]

    Elliot, M.S.; Rasmussen, B.P.; Walton, Z.; Bolding, B.

    2009-01-01

    , poorly tuned EEVs can still exhibit undesirable behavior, and frequent valve adjustments raise concerns about device longevity. In this work, we propose a cascaded control approach, which regulates evapo- rator pressure and superheat and is achieved... with a feedback control device that uses a hybrid of mechanical and electronic feedback. Analysis of the fundamental dynamic behavior of evapo- rator superheat motivates this approach, while experimental evaluation of two separate systems demonstrates...

  14. Moisture absorption in hybrid composites 

    E-Print Network [OSTI]

    Clark, Dan Laro

    1983-01-01

    Moisture Analysis for Steady State Boundary Conditions", Journal of Com osite Materials, Vol. 15, March 1981, pp. 142-152. 7. Weitsman, Y. , Priorate Communication, Texas A&M University, January 1983. 8. Wirth, Patricia E. and Rodin, Ervin Y. , "A... of Department) December 1983 111. ABSTRACT Moisture Absorption in Hybrid Composites (December 1983) Dan Laro Clark, B. S. Aerospace Engineering Texas A&M University Co-Chairmen of Advisory Comnittee: Dr. Y. Weitsman Dr. W. J. Horn This thesis presents...

  15. Compositional Variation Within Hybrid Nanostructures

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would like submit the following commentsMethodsCompositional Variation Within Hybrid

  16. Hybrid and Plug-in Electric Vehicles

    SciTech Connect (OSTI)

    2014-05-20

    Hybrid and plug-in electric vehicles use electricity either as their primary fuel or to improve the efficiency of conventional vehicle designs. This new generation of vehicles, often called electric drive vehicles, can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles(PHEVs), and all-electric vehicles (EVs). Together, they have great potential to reduce U.S. petroleum use.

  17. Hybrid States from Constituent Glue Model

    E-Print Network [OSTI]

    F. Iddir; L. Semlala

    2007-12-11

    The hybrid meson is one of the most interesting new hadron specie beyond the naive quark model. It acquire a great attention both from the theoretical and experimental efforts. Many good candidates have been claimed to be observed, but there is no absolute confirmation about existence of hybrid mesons. In the present work we propose new calculations of the masses and decay widths of the hybrid mesons in the context of constituent gluon model.

  18. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Rotaxanes: Interlocked Structures for Quantum Computing? Print Rotaxanes are mechanically interlocked molecular architectures consisting of a dumbbell-shaped molecule, the...

  19. Hybrid Performance of the Pierre Auger Observatory

    E-Print Network [OSTI]

    B. R. Dawson; for the Pierre Auger Collaboration

    2007-06-08

    A key feature of the Pierre Auger Observatory is its hybrid design, in which ultra high energy cosmic rays are detected simultaneously by fluorescence telescopes and a ground array. The two techniques see air showers in complementary ways, providing important cross-checks and measurement redundancy. Much of the hybrid capability stems from the accurate geometrical reconstruction it achieves, with accuracy better than either the ground array detectors or a single telescope could achieve independently. We have studied the geometrical and longitudinal profile reconstructions of hybrid events. We present the results for the hybrid performance of the Observatory, including trigger efficiency, energy and angular resolution, and the efficiency of the event selection.

  20. Hybrid slab-microchannel gel electrophoresis system

    DOE Patents [OSTI]

    Balch, Joseph W. (Livermore, CA); Carrano, Anthony V. (Livermore, CA); Davidson, James C. (Livermore, CA); Koo, Jackson C. (San Ramon, CA)

    1998-01-01

    A hybrid slab-microchannel gel electrophoresis system. The hybrid system permits the fabrication of isolated microchannels for biomolecule separations without imposing the constraint of a totally sealed system. The hybrid system is reusable and ultimately much simpler and less costly to manufacture than a closed channel plate system. The hybrid system incorporates a microslab portion of the separation medium above the microchannels, thus at least substantially reducing the possibility of non-uniform field distribution and breakdown due to uncontrollable leakage. A microslab of the sieving matrix is built into the system by using plastic spacer materials and is used to uniformly couple the top plate with the bottom microchannel plate.

  1. Ultracapacitors and Batteries in Hybrid Vehicles

    SciTech Connect (OSTI)

    Pesaran, A.; Markel, T.; Zolot, M.; Sprik, S.

    2005-08-01

    Using an ultracapacitor in conjunction with a battery in a hybrid vehicle combines the power performance of the former with the greater energy storage capability of the latter.

  2. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    cycle gas turbine power plant carbon capture and storagewind hybrid combined cycle power plant natural gas combinedPower Plants study, Volume 1: Bituminous Coal and Natural Gas

  3. A verification framework for hybrid systems

    E-Print Network [OSTI]

    Mitra, Sayan

    2007-01-01

    Combining; discrete state transitions with differential equations, Hybrid system models provide an expressive formalism for describing software systems that interact with a physical environment. Automatically checking ...

  4. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    is such that many related structures can be made from similar basic building blocks. The synthesis of hybrid organic-inorganic rotaxanes, with the magnetically active metal sites...

  5. Probing Compositional Variation within Hybrid Nanostructures

    E-Print Network [OSTI]

    Yuhas, Benjamin D.

    2010-01-01

    Charge Retention and Photocatalysis with Hybrid CdSe?Ausensing, 14,15 and photocatalysis. 16?23 In particular, the

  6. Advanced Coal Wind Hybrid: Economic Analysis

    E-Print Network [OSTI]

    Phadke, Amol

    2008-01-01

    IGCC PC advanced coal-wind hybrid combined cycle power plantnatural gas combined cycle gas turbine power plant carboncrude gasification combined cycle power plant with carbon

  7. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    THAT MIGHT REDUCE HYBRID IMPACT ON OIL CONSUMPTION AND GHGhave been reduced, oil consumption continues to create2010, United States VMT Oil consumption GHG 2010, California

  8. Plug-In Hybrid Electric Vehicles (Presentation)

    SciTech Connect (OSTI)

    Markel, T.

    2006-05-08

    Provides an overview on the current status, long-term prospects, and key challenges in the development of plug-in hybrid electric vehicle technology.

  9. Kit for detecting nucleic acid sequences using competitive hybridization probes

    DOE Patents [OSTI]

    Lucas, Joe N. (San Ramon, CA); Straume, Tore (Tracy, CA); Bogen, Kenneth T. (Walnut Creek, CA)

    2001-01-01

    A kit is provided for detecting a target nucleic acid sequence in a sample, the kit comprising: a first hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the first hybridization probe including a first complexing agent for forming a binding pair with a second complexing agent; and a second hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the first hybridization probe does not selectively hybridize, the second hybridization probe including a detectable marker; a third hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a first portion of the target sequence, the third hybridization probe including the same detectable marker as the second hybridization probe; and a fourth hybridization probe which includes a nucleic acid sequence that is sufficiently complementary to selectively hybridize to a second portion of the target sequence to which the third hybridization probe does not selectively hybridize, the fourth hybridization probe including the first complexing agent for forming a binding pair with the second complexing agent; wherein the first and second hybridization probes are capable of simultaneously hybridizing to the target sequence and the third and fourth hybridization probes are capable of simultaneously hybridizing to the target sequence, the detectable marker is not present on the first or fourth hybridization probes and the first, second, third, and fourth hybridization probes each include a competitive nucleic acid sequence which is sufficiently complementary to a third portion of the target sequence that the competitive sequences of the first, second, third, and fourth hybridization probes compete with each other to hybridize to the third portion of the target sequence.

  10. SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1997. Companies Participating in the 1997 Corn Hybrid Trials

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    1 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1997. Companies Participating in the 1997 Corn Hybrid COLUMBIA PLAINVIEW TX 79072 NORTHRUP KING CO. NORTHRUP KING PO BOX 959 MINNEAPOLIS MN 55440 PIONEER HI, INC. WILSON PO BOX 391 HARLAN IA 51537 VIRGINIA CORN HYBRID TRIALS IN 1997 Coordinated by H. Behl, E

  11. The impact of hybridization on morphological variation on Xiphophorus fishes 

    E-Print Network [OSTI]

    Macedo, Danielle Carter de

    2013-02-04

    Hybridization can produce novel phenotypic variation which may allow hybrid populations to evolve in novel directions relative to parentals. Hybridization can produce intermediate as well as extreme phenotypes with respect to the parent species...

  12. Hybrid Multiscale Methods I. Hyperbolic Relaxation Giacomo Dimarco

    E-Print Network [OSTI]

    Dimarco, Giacomo

    Hybrid Multiscale Methods I. Hyperbolic Relaxation Problems Giacomo Dimarco Lorenzo Pareschi Abstract In this paper we consider the development of hybrid numerical methods for the solution hybrid representation of the solution. After the introduction of the different schemes the performance

  13. A Hybrid-Filter Approach to Turbulence Simulation

    E-Print Network [OSTI]

    Rajamani, Bernie; Kim, John

    2010-01-01

    M. : Properties of the hybrid RANS/LES filter. Theor.1765 (1991) 6. Hamba, F. : A hybrid RANS/LES simulation of2003) 12. Rajamani, B. : Hybrid RANS-LES modeling of High-Re

  14. MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP

    E-Print Network [OSTI]

    MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr.................................................................................................................... 16 MODELING OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS

  15. Hybrid spread spectrum radio system

    DOE Patents [OSTI]

    Smith, Stephen F. (London, TN); Dress, William B. (Camas, WA)

    2010-02-02

    Systems and methods are described for hybrid spread spectrum radio systems. A method includes modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control an amplification circuit that provides a gain to the signal. Another method includes: modulating a signal by utilizing a subset of bits from a pseudo-random code generator to control a fast hopping frequency synthesizer; and fast frequency hopping the signal with the fast hopping frequency synthesizer, wherein multiple frequency hops occur within a single data-bit time.

  16. Hybrids Plus | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource History View NewGuam: Energyarea,Magazine JumpEnergyHyEnergy SystemsHybrids Plus

  17. hybridTalk1.ppt

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years5/04 |3 The RetrievalHybrid

  18. Hybrid Locomotive | GE Global Research

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHunting forHybridTier

  19. Advanced, Energy-Efficient Hybrid Membrane System for Industrial...

    Broader source: Energy.gov (indexed) [DOE]

    Advanced, Energy- Efficient Hybrid Membrane System for Industrial Water Reuse New Hybrid Membrane System Utilizes Industrial Waste Heat to Power Water Purification Process As...

  20. Microfluidics: Kinetics of Hybridized DNA With Fluid Flow Variations...

    Office of Scientific and Technical Information (OSTI)

    Conference: Microfluidics: Kinetics of Hybridized DNA With Fluid Flow Variations. Citation Details In-Document Search Title: Microfluidics: Kinetics of Hybridized DNA With Fluid...

  1. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    Moderate Hybrid-electric Vehicles. ESScap06, Switzerland,GH. SIMPLEV: A Simple Electric Vehicle Simulation Program-Ultracapacitors in Hybrid- electric Vehicle Applications.

  2. Hybrid Vehicles: Cut Pollution & Save Money | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicles: Cut Pollution & Save Money Hybrid Vehicles: Cut Pollution & Save Money Below is information about the student activitylesson plan from your search. Grades 5-8...

  3. Hybrid Polymer/Lipid Vesicles via Salt and Agitation Induced...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Hybrid PolymerLipid Vesicles via Salt and Agitation Induced Fusion. Citation Details In-Document Search Title: Hybrid PolymerLipid Vesicles via Salt and...

  4. User-Oriented Modeling Tools for Advanced Hybrid and Climate...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop Air Conditioners User-Oriented Modeling Tools for Advanced Hybrid and Climate-Appropriate Rooftop...

  5. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study:...

  6. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-05-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  7. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2011-10-01

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  8. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    and Yablonovitch, E. , Hybrid solar system, USA Provisionaland Yablonovitch, E. , Hybrid solar system, USA ProvisionalEfficiency/power Correlations,” Solar Energy, 83 (5), 614–

  9. Hybrid Solar Cells based on Gallium Arsenide Nanopillars

    E-Print Network [OSTI]

    Haddad, Michael Anthony

    2014-01-01

    Polymer-Based Organic Solar Cells. Chemical Reviews, 2007.et al. , Hybrid Heterojunction Solar Cell Based on Organic–styrenesulfonate) hybrid solar cells. Nanotechnology, 2010.

  10. Vehicle Technologies Office: Materials for Hybrid and Electric...

    Office of Environmental Management (EM)

    Hybrid and Electric Drive Systems Vehicle Technologies Office: Materials for Hybrid and Electric Drive Systems The Vehicle Technologies Office (VTO) is working to lower the cost...

  11. Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses Emissions and fuel economy data were...

  12. 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  13. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Energy Savers [EERE]

    Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile...

  14. Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructu...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase Texas Hydrogen Highway - Fuel Cell Hybrid Bus and Fueling Infrastructure Technology Showcase...

  15. Fuel economy and emissions reduction of HD hybrid truck over...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    economy and emissions reduction of HD hybrid truck over transient driving cycles and interstate roads Fuel economy and emissions reduction of HD hybrid truck over transient driving...

  16. Hybrid fs/ps Rotational CARS Temperature and Concentration Measurement...

    Office of Scientific and Technical Information (OSTI)

    Hybrid fsps Rotational CARS Temperature and Concentration Measurements Using Two Different ps-Duration Probe Beams. Citation Details In-Document Search Title: Hybrid fsps...

  17. Cold-Start Emissions Control in Hybrid Vehicles Equipped with...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for Hydrocarbons and NOx Cold-Start Emissions Control in Hybrid Vehicles Equipped with a Passive Adsorber for...

  18. 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2013 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  19. AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results The Vehicle Technologies...

  20. 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Vehicle Systems Technologies 2014 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies Merit review of DOE Vehicle Technologies research activities...

  1. Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture...

    Office of Scientific and Technical Information (OSTI)

    Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture Citation Details In-Document Search Title: Polyacrylonitrile-Chalcogel Hybrid Sorbents for Radioiodine Capture...

  2. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    batteries and ultracapacitors for electric vehicles. EVS24Battery, Hybrid and Fuel Cell Electric Vehicle Symposiumpublications on electric and hybrid vehicle technology and

  3. Modeling and Optimization of Hybrid Solar Thermoelectric Systems...

    Office of Scientific and Technical Information (OSTI)

    Journal Article: Modeling and Optimization of Hybrid Solar Thermoelectric Systems with Thermosyphons Citation Details In-Document Search Title: Modeling and Optimization of Hybrid...

  4. Oligo and Poly-thiophene/Zno Hybrid Nanowire Solar Cells

    E-Print Network [OSTI]

    Briseno, Alejandro L.

    2010-01-01

    less than organic bulk heterojunction solar cells. Knowledgean organic/inorganic hybrid single nanowire solar cell. End-of individual organic/inorganic hybrid nanowire solar cells.

  5. Hybrid Electric Systems: Goals, Strategies, and Top Accomplishments (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2010-06-01

    Fact sheet describes the work EERE is doing in the areas of hybrid, plug-in hybrid, and all-electric vehicles.

  6. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    in batteries, ultracapacitors, fuel cells and hybrid vehicleBattery, Hybrid and Fuel Cell Electric Vehicle Symposiumcycles. Vehicles with the fuel cell operating in the optimum

  7. Building America Webinar: New Construction Hybrid-Ductless Heat...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile Building America Webinar: New Construction Hybrid-Ductless Heat Pumps Study: Resistance is Futile This...

  8. Environmental Assessment of Plug-In Hybrid Electric Vehicles...

    Energy Savers [EERE]

    Environmental Assessment of Plug-In Hybrid Electric Vehicles Volume 1: Nationwide Greenhouse Gas Emissions Environmental Assessment of Plug-In Hybrid Electric Vehicles Volume 1:...

  9. Advanced Methods Approach to Hybrid Powertrain Systems Optimization...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus Application Advanced Methods Approach to Hybrid Powertrain Systems Optimization of a Transit Bus...

  10. NSF/DOE Thermoelectric Partnership: Inorganic-Organic Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Inorganic-Organic Hybrid Thermoelectrics NSFDOE Thermoelectric Partnership: Inorganic-Organic Hybrid Thermoelectrics 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle...

  11. Project Profile: Hybrid Organic Silicone HTF Utilizing Endothermic...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Organic Silicone HTF Utilizing Endothermic Chemical Reactions for Latent Heat Storage Project Profile: Hybrid Organic Silicone HTF Utilizing Endothermic Chemical Reactions...

  12. GAL4 Two-Hybrid Vectors Handbook

    E-Print Network [OSTI]

    Erickson, F. Les

    Libraries FOR RESEARCH USE ONLY (PR6X890) #12;MATCHMAKER GAL4 Two-Hybrid Vectors Handbook CLONTECH used in the yeast GAL4-based MATCHMAKER Two-Hybrid Systems and Libraries. For ease of use on synthetic defined medium lacking tryptophan or leucine, respectively. The nutritional markers also allow

  13. Hybrid Nanogenerator for Concurrently Harvesting Biomechanical and

    E-Print Network [OSTI]

    Wang, Zhong L.

    -scale energy con- version, renewable and green energy, efficient energy transmission, energy stor- age, energy, and breathing. If efficiently harvested to its full potential, many of the modern energy requirements needed we present a hybrid energy scavenging device for potential in vivo applications. The hybrid device

  14. Intuitionistic Hybrid Logic Torben Brauner a,1

    E-Print Network [OSTI]

    de Paiva, Valeria

    to hybridize constructive modal logics. Alternative systems are discussed, but we fix on a reasonable and well deduction formulation of it. Our nat- ural deduction system is also extended with additional inference rules give natural deduction systems in a uniform way for a wide class of constructive hybrid logics

  15. Discrete and Hybrid Nonholonomy Antonio Bicchi1

    E-Print Network [OSTI]

    Piccoli, Benedetto

    Discrete and Hybrid Nonholonomy Antonio Bicchi1 , Alessia Marigo2 , and Benedetto Piccoli3 1 Centro such as cars, trucks with trailers, rolling 3D objects, underactuated mechanisms, satellites, etc., has made of systems, allowing for discrete and hybrid (mixed continuous and discrete) configurations and transi- tions

  16. NETL's Hybrid Performance, or Hyper, facility

    SciTech Connect (OSTI)

    2013-06-12

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  17. NETL's Hybrid Performance, or Hyper, facility

    ScienceCinema (OSTI)

    None

    2014-06-26

    NETL's Hybrid Performance, or Hyper, facility is a one-of-a-kind laboratory built to develop control strategies for the reliable operation of fuel cell/turbine hybrids and enable the simulation, design, and implementation of commercial equipment. The Hyper facility provides a unique opportunity for researchers to explore issues related to coupling fuel cell and gas turbine technologies.

  18. Implementation Hybrid Trace Verifier (HTV) implements our

    E-Print Network [OSTI]

    Liberzon, Daniel

    to larger problems. References [1] S. Mitra. A Verification Framework for Hybrid Systems. PhD thesis. [3] A. Fehnker and F. Ivaneie. Benchmarks for hybrid systems verification. HSCC, 2993, 2004. A satellite maneuver system. 3. A version of room heating benchmark. 4. An engine control system

  19. Hybrid Modeling of Communication Networks Using Modelica

    E-Print Network [OSTI]

    Hespanha, João Pedro

    Hybrid Modeling of Communication Networks Using Modelica Daniel F¨arnqvist, Katrin Strandemar, Karl is to describe initial work on modeling packet-switched communication network us- ing Modelica [1], [8], which that the hybrid model is suitable for Modelica. More- over, we show that the model can then be efficiently simu

  20. Exotic hybrid mesons with light quarks

    E-Print Network [OSTI]

    Claude Bernard; Tom Blum; Thomas A. DeGrand; Carleton DeTar; Steven Gottlieb; Urs. M. Heller; Jim Hetrick; Craig McNeile; Kari Rummukainen; Bob Sugar; Doug Toussaint; Matt Wingate

    1996-07-12

    Hybrid mesons, made from a quark, an antiquark and gluons, can have quantum numbers inaccessible to conventional quark-antiquark states. Confirmation of such states would give information on the role of "dynamical" color in low energy QCD. We present preliminary results for hybrid meson masses using light Wilson valence quarks.

  1. Quantum technologies with hybrid systems

    E-Print Network [OSTI]

    G. Kurizki; P. Bertet; Y. Kubo; K. Mølmer; D. Petrosyan; P. Rabl; J. Schmiedmayer

    2015-04-01

    An extensively pursued current direction of research in physics aims at the development of practical technologies that exploit the effects of quantum mechanics. As part of this ongoing effort, devices for information processing, secure communication and high-precision sensing are being implemented with diverse systems, ranging from photons, atoms and spins to mesoscopic superconducting and nanomechanical structures. Their physical properties make some of these systems better suited than others for specific tasks; thus, photons are well suited for transmitting quantum information, weakly interacting spins can serve as long-lived quantum memories, and superconducting elements can rapidly process information encoded in their quantum states. A central goal of the envisaged quantum technologies is to develop devices that can simultaneously perform several of these tasks, namely, reliably store, process, and transmit quantum information. Hybrid quantum systems composed of different physical components with complementary functionalities may provide precisely such multi-tasking capabilities. This article reviews some of the driving theoretical ideas and first experimental realizations of hybrid quantum systems and the opportunities and the challenges they present and offers a glance at the near- and long-term perspectives of this fascinating and rapidly expanding field.

  2. Ultra-thin microporous/hybrid materials

    DOE Patents [OSTI]

    Jiang, Ying-Bing (Albuquerque, NM); Cecchi, Joseph L. (Albuquerque, NM); Brinker, C. Jeffrey (Albuquerque, NM)

    2012-05-29

    Ultra-thin hybrid and/or microporous materials and methods for their fabrication are provided. In one embodiment, the exemplary hybrid membranes can be formed including successive surface activation and reaction steps on a porous support that is patterned or non-patterned. The surface activation can be performed using remote plasma exposure to locally activate the exterior surfaces of porous support. Organic/inorganic hybrid precursors such as organometallic silane precursors can be condensed on the locally activated exterior surfaces, whereby ALD reactions can then take place between the condensed hybrid precursors and a reactant. Various embodiments can also include an intermittent replacement of ALD precursors during the membrane formation so as to enhance the hybrid molecular network of the membranes.

  3. Space and power efficient hybrid counters array

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2010-03-30

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  4. Space and power efficient hybrid counters array

    DOE Patents [OSTI]

    Gara, Alan G. (Mount Kisco, NY); Salapura, Valentina (Chappaqua, NY)

    2009-05-12

    A hybrid counter array device for counting events. The hybrid counter array includes a first counter portion comprising N counter devices, each counter device for receiving signals representing occurrences of events from an event source and providing a first count value corresponding to a lower order bits of the hybrid counter array. The hybrid counter array includes a second counter portion comprising a memory array device having N addressable memory locations in correspondence with the N counter devices, each addressable memory location for storing a second count value representing higher order bits of the hybrid counter array. A control device monitors each of the N counter devices of the first counter portion and initiates updating a value of a corresponding second count value stored at the corresponding addressable memory location in the second counter portion. Thus, a combination of the first and second count values provide an instantaneous measure of number of events received.

  5. Hybridization and Selective Release of DNA Microarrays

    SciTech Connect (OSTI)

    Beer, N R; Baker, B; Piggott, T; Maberry, S; Hara, C M; DeOtte, J; Benett, W; Mukerjee, E; Dzenitis, J; Wheeler, E K

    2011-11-29

    DNA microarrays contain sequence specific probes arrayed in distinct spots numbering from 10,000 to over 1,000,000, depending on the platform. This tremendous degree of multiplexing gives microarrays great potential for environmental background sampling, broad-spectrum clinical monitoring, and continuous biological threat detection. In practice, their use in these applications is not common due to limited information content, long processing times, and high cost. The work focused on characterizing the phenomena of microarray hybridization and selective release that will allow these limitations to be addressed. This will revolutionize the ways that microarrays can be used for LLNL's Global Security missions. The goals of this project were two-fold: automated faster hybridizations and selective release of hybridized features. The first study area involves hybridization kinetics and mass-transfer effects. the standard hybridization protocol uses an overnight incubation to achieve the best possible signal for any sample type, as well as for convenience in manual processing. There is potential to significantly shorten this time based on better understanding and control of the rate-limiting processes and knowledge of the progress of the hybridization. In the hybridization work, a custom microarray flow cell was used to manipulate the chemical and thermal environment of the array and autonomously image the changes over time during hybridization. The second study area is selective release. Microarrays easily generate hybridization patterns and signatures, but there is still an unmet need for methodologies enabling rapid and selective analysis of these patterns and signatures. Detailed analysis of individual spots by subsequent sequencing could potentially yield significant information for rapidly mutating and emerging (or deliberately engineered) pathogens. In the selective release work, optical energy deposition with coherent light quickly provides the thermal energy to single spots to release hybridized DNA. This work leverages LLNL expertise in optics, microfluids, and bioinformatics.

  6. Hybrid Systems with Finite Bisimulations Gerardo Lafferriere1

    E-Print Network [OSTI]

    Pappas, George J.

    Hybrid Systems with Finite Bisimulations Gerardo Lafferriere1 , George J. Pappas2 , and Shankar is one of the main approach- es to hybrid system analysis. Decidability questions for verification algo classes of planar hybrid systems. 1 Introduction Hybrid systems consist of finite state machines

  7. Hybrid coupled modeling of the tropical Pacific using neural networks

    E-Print Network [OSTI]

    Hsieh, William

    Hybrid coupled modeling of the tropical Pacific using neural networks Shuyong Li, William W. Hsieh To investigate the potential for improving hybrid coupled models (HCM) of the tropical Pacific by the use: dynamical coupled models, statistical models and hybrid coupled models [Barnston et al., 1994]. A hybrid

  8. Hybrid optimal control Notes for CIRA course, Bertinoro 2003.

    E-Print Network [OSTI]

    Piccoli, Benedetto

    Hybrid optimal control Notes for CIRA course, Bertinoro 2003. Benedetto Piccoli # Abstract. These notes are devoted to the use of some analytical tools for hybrid optimal control. After introducing basic notations for a quite general class of hybrid systems, we state both the Hybrid Maximum Principle

  9. Study of Phase Selectivity of Organic-Inorganic Hybrid Semiconductors

    E-Print Network [OSTI]

    Li, Jing

    observation of the phase selection for these hybrid materials. Introduction Hybrid organic_Youn_Moon@nrel.gov. Present address: University of Texas, Austin, TX 78712. (1) Handbook of Organic-Inorganic Hybrid MaterialsArticles Study of Phase Selectivity of Organic-Inorganic Hybrid Semiconductors Chang-Youn Moon

  10. Powertrain system for a hybrid electric vehicle

    DOE Patents [OSTI]

    Reed, Jr., Richard G. (Royal Oak, MI); Boberg, Evan S. (Hazel Park, MI); Lawrie, Robert E. (Whitmore Lake, MI); Castaing, Francois J. (Bloomfield Township, MI)

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration.

  11. Powertrain system for a hybrid electric vehicle

    DOE Patents [OSTI]

    Reed, R.G. Jr.; Boberg, E.S.; Lawrie, R.E.; Castaing, F.J.

    1999-08-31

    A hybrid electric powertrain system is provided including an electric motor/generator drivingly engaged with the drive shaft of a transmission. The electric is utilized for synchronizing the rotation of the drive shaft with the driven shaft during gear shift operations. In addition, a mild hybrid concept is provided which utilizes a smaller electric motor than typical hybrid powertrain systems. Because the electric motor is drivingly engaged with the drive shaft of the transmission, the electric motor/generator is driven at high speed even when the vehicle speed is low so that the electric motor/generator provides more efficient regeneration. 34 figs.

  12. Copyright 2013 Gaia Geothermal, LLC 1Hybrid Design Slide 1.1 -Hybrid Design with the New GLD

    E-Print Network [OSTI]

    .1 - Modified design day loopfield loads are displayed and heat pump performanceCopyright © 2013 ­ Gaia Geothermal, LLC 1Hybrid Design ­ Slide 1.1 - Hybrid Design Geothermal, LLC 2Hybrid Design ­ Slide 1.1 - The new hybrid design tool in GLD provides: · Precision peak

  13. INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1999 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1999.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1999 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1999. Companies participating in the 1999 Corn Hybrid Trials 2 1999 Virginia Corn Hybird Plot Information and Management Practices 3 Table 1. 1999 Relative Yield of hybrids entered in three or more

  14. Issue 5: High Interest in Hybrid Cars

    E-Print Network [OSTI]

    Ong, Paul M.; Haselhoff, Kim

    2005-01-01

    Reports. (2005). “Which Cars Would People Get Again? ” Con-Motor Trend Announces 2004 Car of the Year. ” Motor Trend,Oregon Hybrid Gas-Electric Car Owners. July. U.S. Internal

  15. Sensitivity analysis of oscillating hybrid systems

    E-Print Network [OSTI]

    Saxena, Vibhu Prakash

    2010-01-01

    Many models of physical systems oscillate periodically and exhibit both discrete-state and continuous-state dynamics. These systems are called oscillating hybrid systems and find applications in diverse areas of science ...

  16. Hybrid Membranes for Light Gas Separations 

    E-Print Network [OSTI]

    Liu, Ting

    2012-07-16

    Membrane separations provide a potentially attractive technology over conventional processes due to their advantages, such as low capital cost and energy consumption. The goal of this thesis is to design hybrid membranes that facilitate specific gas...

  17. Quantifying the benefits of hybrid vehicles

    E-Print Network [OSTI]

    Turrentine, Tom; Delucchi, Mark; Heffner, Reid R.; Kurani, Kenneth S; Sun, Yongling

    2006-01-01

    Car problems Pollution from motor vehicles Crude oil,the pollution from any one new motor vehicle is slight,of hybrid vehicles will reduce oil use and pollution in the

  18. Renew Workshop on Fusion-Fission Hybrids

    E-Print Network [OSTI]

    for sustainability Fast burners ­ waste management Fast breeders ­ fuel supply #12;8 High Level Findings Potential and burners) Not a fair comparison! Hybrids assume advances in technology: materials and new fuel forms

  19. Rational design of hybrid organic solar cells

    E-Print Network [OSTI]

    Lentz, Levi (Levi Carl)

    2014-01-01

    In this thesis, we will present a novel design for a nano-structured organic-inorganic hybrid photovoltaic material that will address current challenges in bulk heterojunction (BHJ) organic-based solar cell materials. ...

  20. Knoxville Area Transit: Propane Hybrid Electric Trolleys

    SciTech Connect (OSTI)

    Not Available

    2005-04-01

    A 2-page fact sheet summarizing the evaluation done by the U.S. Department of Energy's Advanced Vehicle Testing Activity on the Knoxville Area Transit's use of propane hybrid electric trolleys.

  1. Hybrid zones in Rhododendron subsection Taliensia 

    E-Print Network [OSTI]

    Marczewski, Tobias

    2011-06-27

    The investigation of hybrid zones has proven to be one of the most promising approaches to advance our understanding of species barriers, and to elucidate evolutionary processes involved in speciation. Due to the improvement ...

  2. Control system for a hybrid powertrain system

    DOE Patents [OSTI]

    Naqvi, Ali K.; Demirovic, Besim; Gupta, Pinaki; Kaminsky, Lawrence A.

    2014-09-09

    A vehicle includes a powertrain with an engine, first and second torque machines, and a hybrid transmission. A method for operating the vehicle includes operating the engine in an unfueled state, releasing an off-going clutch which when engaged effects operation of the hybrid transmission in a first continuously variable mode, and applying a friction braking torque to a wheel of the vehicle to compensate for an increase in an output torque of the hybrid transmission resulting from releasing the off-going clutch. Subsequent to releasing the off-going clutch, an oncoming clutch which when engaged effects operation of the hybrid transmission in a second continuously variable mode is synchronized. Subsequent to synchronization of the oncoming clutch, the oncoming clutch is engaged.

  3. Hybrid Pulsators -- Pulsating Stars with Multiple Identities

    E-Print Network [OSTI]

    Zhou, A -Y

    2015-01-01

    We have carried out a statistic survey on the pulsating variable stars with multiple identities. These stars were identified to exhibit two types of pulsation or multiple light variability types in the literature, and are usually called hybrid pulsators. We extracted the hybrid information based on the Simbad database. Actually, all the variables with multiple identities are retrieved. The survey covers various pulsating stars across the Hertzsprung-Russell diagram. We aim at giving a clue in selecting interesting targets for further observation. Hybrid pulsators are excellent targets for asteroseismology. An important implication of such stars is their potential in advancing the theories of both stellar evolution and pulsation. By presenting the statistics, we address the open questions and prospects regarding current status of hybrid pulsation studies.

  4. Lattice study of hybrid static potentials

    E-Print Network [OSTI]

    Philipp Wolf; Marc Wagner

    2015-02-02

    We report about a recently started project with the aim to compute hybrid static potentials using lattice gauge theory. First preliminary results for pure SU(2) Yang-Mills theory are presented.

  5. Hybrid redundant robot Robotic Hands for

    E-Print Network [OSTI]

    Simaan, Nabil

    Hybrid redundant robot Robotic Hands for Quaternion representation Singularity Analysis using line geometry NEW COURSE (Spring 2011) ME392-02: Special Topics: ADVANCED TOPICS IN ROBOTICS AND MECHANISM SYNTHESIS Instructor: N. Simaan Prerequisites: Linear algebra, Introduction to robotics; Recommended

  6. Enhancing Interactive Web Applications in Hybrid Networks

    E-Print Network [OSTI]

    Venkataramani, Arun

    Enhancing Interactive Web Applications in Hybrid Networks Aruna Balasubramanian Brian Neil Levine into a one- shot request/response process. We deployed a prototype of Thedu on the DieselNet testbed

  7. HYBRID MODELING OF COMMUNICATION NETWORKS USING MODELICA

    E-Print Network [OSTI]

    Johansson, Karl Henrik

    HYBRID MODELING OF COMMUNICATION NETWORKS USING MODELICA Daniel F¨arnqvist Katrin Strandemar and simulation of communication networks using the modeling language Modelica are discussed. Congestion control model, that Modelica provides an efficient platform for the analysis of communication networks

  8. Fuel Savings from Hybrid Electric Vehicles

    SciTech Connect (OSTI)

    Bennion, K.; Thornton, M.

    2009-03-01

    NREL's study shows that hybrid electric vehicles can significantly reduce oil imports for use in light-duty vehicles, particularly if drivers switch to smaller, more fuel-efficient vehicles overall.

  9. HOPSPACK: Hybrid Optimization Parallel Search Package.

    SciTech Connect (OSTI)

    Gray, Genetha A.; Kolda, Tamara G.; Griffin, Joshua; Taddy, Matt; Martinez-Canales, Monica

    2008-12-01

    In this paper, we describe the technical details of HOPSPACK (Hybrid Optimization Parallel SearchPackage), a new software platform which facilitates combining multiple optimization routines into asingle, tightly-coupled, hybrid algorithm that supports parallel function evaluations. The frameworkis designed such that existing optimization source code can be easily incorporated with minimalcode modification. By maintaining the integrity of each individual solver, the strengths and codesophistication of the original optimization package are retained and exploited.4

  10. Hybrid ECAL: Optimization and Related Developments

    E-Print Network [OSTI]

    T. Suehara; H. Hirai; H. Sumida; H. Ueno; Y. Sudo; T. Yoshioka; K. Kawagoe

    2015-03-30

    Hybrid ECAL is a cost-conscious option of electromagnetic calorimeter (ECAL) for particle flow calorimetry to be used in a detector of International Linear Collider (ILC). It is a combination of silicon-tungsten ECAL, which realizes high granularity and robust measurement of electromagnetic shower, and scintillator-tungsten ECAL, which gives affordable cost with similar performance to silicon. Optimization and a data acquisition trial in a test bench for the hybrid ECAL are described in this article.

  11. Analysis of Hybrid Hydrogen Systems: Final Report

    SciTech Connect (OSTI)

    Dean, J.; Braun, R.; Munoz, D.; Penev, M.; Kinchin, C.

    2010-01-01

    Report on biomass pathways for hydrogen production and how they can be hybridized to support renewable electricity generation. Two hybrid systems were studied in detail for process feasibility and economic performance. The best-performing system was estimated to produce hydrogen at costs ($1.67/kg) within Department of Energy targets ($2.10/kg) for central biomass-derived hydrogen production while also providing value-added energy services to the electric grid.

  12. Hybrid ECAL: Optimization and Related Developments

    E-Print Network [OSTI]

    Suehara, T; Sumida, H; Ueno, H; Sudo, Y; Yoshioka, T; Kawagoe, K

    2015-01-01

    Hybrid ECAL is a cost-conscious option of electromagnetic calorimeter (ECAL) for particle flow calorimetry to be used in a detector of International Linear Collider (ILC). It is a combination of silicon-tungsten ECAL, which realizes high granularity and robust measurement of electromagnetic shower, and scintillator-tungsten ECAL, which gives affordable cost with similar performance to silicon. Optimization and a data acquisition trial in a test bench for the hybrid ECAL are described in this article.

  13. AVTA: 2012 Toyota Prius PHEV Downloadable Dynamometer Database Reports

    Broader source: Energy.gov [DOE]

    The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a wide range of advanced vehicles and technologies on dynamometers, closed test tracks, and on-the-road. ...

  14. Massachusetts Electric Vehicle Efforts

    E-Print Network [OSTI]

    California at Davis, University of

    ,500 for full battery electric vehicle (BEV) and $5,000 for plug- in hybrid electric vehicle (PHEV) · Financial 39 Tesla 39 BMW 26 Toyota 7 Honda 3 Cadillac 3 Mitsubishi 2 #12;Department of Public Utilities · DPU

  15. 1 | Fuel Cell Technologies Program Source: US DOE 4/3/2012 eere.energy.gov Fuel Cell Technologies Overview

    E-Print Network [OSTI]

    Cell Patents Geographic Distribution 2002-2010 Top 10 companies: Honda, GM, Toyota, UTC Power, Samsung Reduced Oil Use Reduced Air Pollution Fuel Flexibility · 40 - 60% (electrical) · > 70% (electrical, hybrid

  16. 912 IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, VOL. 47, NO. 2, MARCH/APRIL 2011 Impact of SiC Devices on Hybrid Electric and

    E-Print Network [OSTI]

    Tolbert, Leon M.

    , Senior Member, IEEE, and Burak Ozpineci, Senior Member, IEEE Abstract--The application of silicon carbide and weight and the vehicle's fuel economy. Two types of HEVs are considered. One is the 2004 Toyota Prius HEV carbide (SiC). I. INTRODUCTION AS THE issues of natural resource depletion and en- vironmental impacts

  17. Graphene-Plasmonic Hybrid Platform for Label-Free SERS Biomedical Detection

    E-Print Network [OSTI]

    Wang, Pu

    2015-01-01

    silver nanoparticle hybrids for ultrasensitive single-optical anisotropy in hybrid graphene-metal nanoparticlesensitive graphene-plasmonic hybrid platform for label-free

  18. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    E-Print Network [OSTI]

    Howison, Mark

    2010-01-01

    W. , and Childs, H. (2010) MPI-hybrid parallelism for volumeHybrid Parallelism for Volume Rendering on Large, Multi-corecharacteristics of “hybrid” parallel program- ming and

  19. Hybrid Parallelism for Volume Rendering on Large, Multi-core Systems

    E-Print Network [OSTI]

    Howison, Mark

    2010-01-01

    Hybrid Parallelism for Volume Rendering on Large, Multi-corendings indicate that the hybrid-parallel implementation, atpassing against a “hybrid” parallel im- plementation, which

  20. DRAFT INTERIM REPORT: NATIONAL PROGRAM PLAN FOR PASSIVE AND HYBRID SOLAR HEATING AND COOLING

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01

    passive and hybrid space heating systems. Space Cooling Aand hybrid solar heating and cooling systems. Experimentspassive, and hybrid systems for heating, cooling, and

  1. Seed Packaging and Seed Characteristics in a Raphanus Hybrid-Derived Lineage

    E-Print Network [OSTI]

    Heredia, Sylvia Margarita

    2012-01-01

    reproduction in the hybrid-derived invasive, California wildreproduction in the hybrid-derived invasive, California wildreproduction in the hybrid-derived invasive, California wild

  2. Lower hybrid wavepacket stochasticity revisited

    SciTech Connect (OSTI)

    Fuchs, V.; Krlín, L.; Pánek, R.; Preinhaelter, J.; Seidl, J.; Urban, J.

    2014-02-12

    Analysis is presented in support of the explanation in Ref. [1] for the observation of relativistic electrons during Lower Hybrid (LH) operation in EC pre-heated plasma at the WEGA stellarator [1,2]. LH power from the WEGA TE11 circular waveguide, 9 cm diameter, un-phased, 2.45 GHz antenna, is radiated into a B?0.5 T, Ðœ„n{sub e}?5×10{sup 17} 1/m{sup 3} plasma at T{sub e}?10 eV bulk temperature with an EC generated 50 keV component [1]. The fast electrons cycle around flux or drift surfaces with few collisions, sufficient for randomizing phases but insufficient for slowing fast electrons down, and thus repeatedly interact with the rf field close to the antenna mouth, gaining energy in the process. Our antenna calculations reveal a standing electric field pattern at the antenna mouth, with which we formulate the electron dynamics via a relativistic Hamiltonian. A simple approximation of the equations of motion leads to a relativistic generalization of the area-preserving Fermi-Ulam (F-U) map [3], allowing phase-space global stochasticity analysis. At typical WEGA plasma and antenna conditions, the F-U map predicts an LH driven current of about 230 A, at about 225 W of dissipated power, in good agreement with the measurements and analysis reported in [1].

  3. Hybrid systems process mixed wastes

    SciTech Connect (OSTI)

    Chertow, M.R.

    1989-10-01

    Some technologies, developed recently in Europe, combine several processes to separate and reuse materials from solid waste. These plants have in common, generally, that they are reasonably small, have a composting component for the organic portion, and often have a refuse-derived fuel component for combustible waste. Many European communities also have very effective drop-off center programs for recyclables such as bottles and cans. By maintaining the integrity of several different fractions of the waste, there is a less to landfill and less to burn. The importance of these hybrid systems is that they introduce in one plant an approach that encompasses the key concept of today's solid waste planning; recover as much as possible and landfill as little as possible. The plants also introduce various risks, particularly of finding secure markets. There are a number of companies offering various combinations of materials recovery, composting, and waste combustion. Four examples are included: multiple materials recovery and refuse-derived fuel production in Eden Prairie, Minnesota; multiple materials recovery, composting and refuse-derived fuel production in Perugia, Italy; composting, refuse-derived fuel, and gasification in Tolmezzo, Italy; and a front-end system on a mass burning waste-to-energy plant in Neuchatel, Switzerland.

  4. Parker Hybrid Hydraulic Drivetrain Demonstration

    SciTech Connect (OSTI)

    Collett, Raymond; Howland, James; Venkiteswaran, Prasad

    2014-03-31

    This report examines the benefits of Parker Hannifin hydraulic hybrid brake energy recovery systems used in commercial applications for vocational purposes. A detailed background on the problem statement being addressed as well as the solution set specific for parcel delivery will be provided. Objectives of the demonstration performed in high start & stop applications included opportunities in fuel usage reduction, emissions reduction, vehicle productivity, and vehicle maintenance. Completed findings during the demonstration period and parallel investigations with NREL, CALSTART, along with a literature review will be provided herein on this research area. Lastly, results identified in the study by third parties validated the savings potential in fuel reduction of on average of 19% to 52% over the baseline in terms of mpg (Lammert, 2014, p11), Parker data for parcel delivery vehicles in the field parallels this at a range of 35% - 50%, emissions reduction of 17.4% lower CO2 per mile and 30.4% lower NOx per mile (Gallo, 2014, p15), with maintenance improvement in the areas of brake and starter replacement, while leaving room for further study in the area of productivity in terms of specific metrics that can be applied and studied.

  5. Coherent hybrid electromagnetic field imaging

    DOE Patents [OSTI]

    Cooke, Bradly J. (Jemez Springs, NM); Guenther, David C. (Los Alamos, NM)

    2008-08-26

    An apparatus and corresponding method for coherent hybrid electromagnetic field imaging of a target, where an energy source is used to generate a propagating electromagnetic beam, an electromagnetic beam splitting means to split the beam into two or more coherently matched beams of about equal amplitude, and where the spatial and temporal self-coherence between each two or more coherently matched beams is preserved. Two or more differential modulation means are employed to modulate each two or more coherently matched beams with a time-varying polarization, frequency, phase, and amplitude signal. An electromagnetic beam combining means is used to coherently combine said two or more coherently matched beams into a coherent electromagnetic beam. One or more electromagnetic beam controlling means are used for collimating, guiding, or focusing the coherent electromagnetic beam. One or more apertures are used for transmitting and receiving the coherent electromagnetic beam to and from the target. A receiver is used that is capable of square-law detection of the coherent electromagnetic beam. A waveform generator is used that is capable of generation and control of time-varying polarization, frequency, phase, or amplitude modulation waveforms and sequences. A means of synchronizing time varying waveform is used between the energy source and the receiver. Finally, a means of displaying the images created by the interaction of the coherent electromagnetic beam with target is employed.

  6. HybridStore: An Efficient Data Management System for Hybrid Flash-Based Sensor Devices

    E-Print Network [OSTI]

    Baras, John S.

    HybridStore: An Efficient Data Management System for Hybrid Flash-Based Sensor Devices Baobing WangStore, a novel efficient resource- aware data management system for flash-based sensor devices to store and query, designing an efficient resource- aware data management system for flash-based sensor devices is a very

  7. Lyapunov-Like Conditions for the Existence of Zeno Behavior in Hybrid and Lagrangian Hybrid Systems

    E-Print Network [OSTI]

    Ames, Aaron

    Lyapunov-Like Conditions for the Existence of Zeno Behavior in Hybrid and Lagrangian Hybrid Systems Andrew Lamperski and Aaron D. Ames Abstract-- Lyapunov-like conditions that utilize generaliza- tions configuration space, we utilize our Lyapunov-like conditions to obtain easily verifiable necessary

  8. Optimal design of hybrid and non-hybrid fuel cell vehicles

    E-Print Network [OSTI]

    Papalambros, Panos

    Optimal design of hybrid and non-hybrid fuel cell vehicles by Jeongwoo Han A thesis submitted cell vehicles by Jeongwoo Han Chair: Panos Y. Papalambros Fuel cells are under development technology, however, still has many issues to be addressed for market acceptance. Several fuel cell vehicle

  9. A Language Model Approach to Keyphrase Extraction Takashi Tomokiyo and Matthew Hurst

    E-Print Network [OSTI]

    of hybrid cars may harvest messages from online fo- rums. They may then want to rapidly construct a hi car example, the result of this pro- cess is a set of phrases like that shown in Figure 1. 1 civic hybrid 2 honda civic hybrid 3 toyota prius 4 electric motor 5 honda civic 6 fuel cell 7 hybrid cars 8

  10. Wind/Hybrid Electricity Applications

    SciTech Connect (OSTI)

    McDaniel, Lori

    2001-03-31

    Wind energy is widely recognized as the most efficient and cost effective form of new renewable energy available in the Midwest. New utility-scale wind farms (arrays of large turbines in high wind areas producing sufficient energy to serve thousands of homes) rival the cost of building new conventional forms of combustion energy plants, gas, diesel and coal power plants. Wind energy is not subject to the inflationary cost of fossil fuels. Wind energy can also be very attractive to residential and commercial electric customers in high wind areas who would like to be more self-sufficient for their energy needs. And wind energy is friendly to the environment at a time when there is increasing concern about pollution and climate change. However, wind energy is an intermittent source of power. Most wind turbines start producing small amounts of electricity at about 8-10 mph (4 meters per second) of wind speed. The turbine does not reach its rated output until the wind reaches about 26-28 mph (12 m/s). So what do you do for power when the output of the wind turbine is not sufficient to meet the demand for energy? This paper will discuss wind hybrid technology options that mix wind with other power sources and storage devices to help solve this problem. This will be done on a variety of scales on the impact of wind energy on the utility system as a whole, and on the commercial and small-scale residential applications. The average cost and cost-benefit of each application along with references to manufacturers will be given. Emerging technologies that promise to shape the future of renewable energy will be explored as well.

  11. Manzanita Hybrid Power system Project Final Report

    SciTech Connect (OSTI)

    Trisha Frank

    2005-03-31

    The Manzanita Indian Reservation is located in southeastern San Diego County, California. The Tribe has long recognized that the Reservation has an abundant wind resource that could be commercially utilized to its benefit, and in 1995 the Tribe established the Manzanita Renewable Energy Office. Through the U.S. Department of Energy's Tribal Energy Program the Band received funds to install a hybrid renewable power system to provide electricity to one of the tribal community buildings, the Manzanita Activities Center (MAC building). The project began September 30, 1999 and was completed March 31, 2005. The system was designed and the equipment supplied by Northern Power Systems, Inc, an engineering company with expertise in renewable hybrid system design and development. Personnel of the National Renewable Energy Laboratory provided technical assistance in system design, and continued to provide technical assistance in system monitoring. The grid-connected renewable hybrid wind/photovoltaic system provides a demonstration of a solar/wind energy hybrid power-generating project on Manzanita Tribal land. During the system design phase, the National Renewable Energy Lab estimated that the wind turbine is expected to produce 10,000-kilowatt hours per year and the solar array 2,000-kilowatt hours per year. The hybrid system was designed to provide approximately 80 percent of the electricity used annually in the MAC building. The project proposed to demonstrate that this kind of a system design would provide highly reliable renewable power for community uses.

  12. Fact #875: June 1, 2015 Hybrid Electric Vehicle Penetration by State, 2014

    Broader source: Energy.gov [DOE]

    Hybrid electric vehicles (HEVs) are conventional hybrid vehicles that use a gasoline engine with a hybrid electric drive for superior efficiency; they do not plug-in. This type of hybrid vehicle...

  13. Crystallization of POSS in a PEG-Based Multiblock Polyurethane: Toward A Hybrid , Kelly A. Burke1

    E-Print Network [OSTI]

    Mather, Patrick T.

    -POSS thermoplastic polyurethane applicable to a novel hybrid hydrogel. Thus, a unique series of hybrid thermoplastic

  14. DRAFT INTERIM REPORT: NATIONAL PROGRAM PLAN FOR PASSIVE AND HYBRID SOLAR HEATING AND COOLING

    E-Print Network [OSTI]

    Authors, Various

    2012-01-01

    heat exchangers, hybrid components such as fans and pumps,for fans, pumps, and valves used in hybrid systems; heat

  15. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01

    Common Passive and Hybrid Heating Cooling Systems Michael].THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

  16. Plug-in hybrid electric vehicle R&D plan

    SciTech Connect (OSTI)

    None, None

    2007-06-01

    FCVT, in consultation with industry and other appropriate DOE offices, developed the Draft Plug-In Hybrid Electric Vehicle R&D Plan to accelerate the development and deployment of technologies critical for plug-in hybrid vehicles.

  17. Hybrid & electric vehicle technology and its market feasibility

    E-Print Network [OSTI]

    Jeon, Sang Yeob

    2010-01-01

    In this thesis, Hybrid Electric Vehicles (HEV), Plug-In Hybrid Electric Vehicle (PHEV) and Electric Vehicle (EV) technology and their sales forecasts are discussed. First, the current limitations and the future potential ...

  18. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    thermal hybrid solar technology," Applied Energy, 87(2),thermal hybrid solar technology," Applied Energy, 87(2),thermal system, solar PVT collector, nonimaging optics, GaAs, solar energy,

  19. Development and Optimization of Modular Hybrid Plasma Reactor...

    Office of Scientific and Technical Information (OSTI)

    Optimization of Modular Hybrid Plasma Reactor N A 36 MATERIALS SCIENCE INL developed a bench-scale, modular hybrid plasma system for gas-phase nanomaterials synthesis. The system...

  20. Hybrid user interfaces : design guidelines and implementation examples

    E-Print Network [OSTI]

    Ahn, Sehyun

    2006-01-01

    A hybrid user interface is a new type of computer user interface that achieves high usability by combining features of graphical user interfaces and command line interfaces. The main goal of a hybrid user interface is to ...

  1. Master's Thesis Hybrid Statistical Model Checking Technique for

    E-Print Network [OSTI]

    Master's Thesis Hybrid Statistical Model Checking Technique for Reliable Safety Critical Systems Technique for Reliable Safety Critical Systems #12;Hybrid Statistical Model Checking Technique for Reliable Safety Critical Systems Advisor : Professor Kim, Moonzoo by Kim, Youngjoo Department of Computer Science

  2. Arc Reversals in Hybrid Bayesian Networks with Deterministic Variables

    E-Print Network [OSTI]

    Cinicioglu, Esma N.; Shenoy, Prakash P.

    2009-05-01

    This article discusses arc reversals in hybrid Bayesian networks with deterministic variables. Hybrid Bayesian networks contain a mix of discrete and continuous chance variables. In a Bayesian network representation, a continuous chance variable...

  3. Influence of Mild Hybridization on Performance and emission in...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Influence of Mild Hybridization on Performance and emission in a 4-Cylinder, In-Line Common Rail Diesel Engine Influence of Mild Hybridization on Performance and emission in a...

  4. Anisotropic flow in transport+hydrodynamics hybrid approaches

    E-Print Network [OSTI]

    Hannah Petersen

    2014-11-26

    This contribution to the focus issue covers anisotropic flow in hybrid approaches. The historical development of hybrid approaches and their impact on the interpretation of flow measurements is reviewed. The major ingredients of a hybrid approach and the transition criteria between transport and hydrodynamics are discussed. The results for anisotropic flow in (event-by-event) hybrid approaches are presented. Some hybrid approaches rely on hadronic transport for the late stages for the reaction (so called afterburner) and others employ transport approaches for the early non equilibrium evolution. In addition, there are 'full' hybrid calculations where a fluid evolution is dynamically embedded in a transport simulation. After demonstrating the success of hybrid approaches at high RHIC and LHC energies, existing hybrid caluclations for collective flow observables at lower beam energies are discussed and remaining challenges outlined.

  5. Fuel Economy Improvements from a Hybrid-Electric/Diesel Powertrain...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Economy Improvements from a Hybrid-ElectricDiesel Powertrain in a Class 4 Parcel Delivery Vehicle Fuel Economy Improvements from a Hybrid-ElectricDiesel Powertrain in a Class 4...

  6. A hybrid plasmonic waveguide terahertz quantum cascade laser

    E-Print Network [OSTI]

    Degl'Innocenti, Riccardo; Shah, Yash D.; Wallis, Robert; Klimont, Adam; Ren, Yuan; Jessop, David S.; Beere, Harvey E.; Ritchie, David A.

    2015-02-23

    We present the realization of a quantum cascade laser emitting at around 2.85 terahertz, based on a hybrid plasmonic waveguide with a low refractive index dielectric cladding. This hybrid waveguide design allows the performance of a double...

  7. The Public, the Private and the Hybrid: Mapping the Governance...

    Open Energy Info (EERE)

    The Public, the Private and the Hybrid: Mapping the Governance of Energy Finance Jump to: navigation, search Tool Summary LAUNCH TOOL Name: The Public, the Private and the Hybrid:...

  8. Using Hybrid MPI and OpenMP on Franklin

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Using Hybrid MPIOpenMP Using Hybrid MPIOpenMP Using OpenMP Franklin has 4 cores sharing the memory on each node. OpenMP is supported within the node. To use OpenMP, a specific...

  9. Fact #762: January 14, 2013 Sales from Introduction: Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: January 14, 2013 Sales from Introduction: Hybrid Vehicles vs. Plug-in Vehicles Fact 762: January 14, 2013 Sales from Introduction: Hybrid Vehicles vs. Plug-in Vehicles The...

  10. Benefits of battery-uItracapacitor hybrid energy storage systems

    E-Print Network [OSTI]

    Smith, Ian C., S.M. (Ian Charles). Massachusetts Institute of Technology

    2012-01-01

    This thesis explores the benefits of battery and battery-ultracapacitor hybrid energy storage systems (ESSs) in pulsed-load applications. It investigates and quantifies the benefits of the hybrid ESS over its battery-only ...

  11. Hybrid vehicle design using global optimisation Wenzhong Gao

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    electronics, hybrid electric vehicles, electric machines, and renewable energy systems. HeHybrid vehicle design using global optimisation algorithms Wenzhong Gao Department of Electrical of Electrical and Computer Engineering, University of Michigan, 4901 Evergreen Road, Dearborn, MI 48128 USA Fax

  12. Hybrid computer simulation of atomic orbitals of one electron system 

    E-Print Network [OSTI]

    Balasubramanium, Prabaker

    1998-01-01

    quantum chemical wave equation. Generating this function is the unit level operation in molecular modeling. Therefore, analyzing the performance of the hybrid computer at this level will bring out the basic differences between hybrid computing and digital...

  13. A summary of EPRI's fusion-fission hybrid evaluation activities

    SciTech Connect (OSTI)

    Amherd, N.A.

    1982-10-01

    A summary is given of recently completed and planned fusion-fission hybrid projects. Electricty supply/demand projections and estimates of future uranium requirements for several different combinations of nuclear systems, including hybrids, are discussed.

  14. Fact #598: November 23, 2009 Hybrid Vehicle Sales by Model

    Office of Energy Efficiency and Renewable Energy (EERE)

    The number of all light vehicles sold declined about 18% from 2007 to 2008, while the number of hybrid vehicles sold declined about 11%. Five new hybrid models were sold in 2008; other than those,...

  15. Hybrid quantum devices and quantum engineering

    E-Print Network [OSTI]

    Margareta Wallquist; Klemens Hammerer; Peter Rabl; Mikhail Lukin; Peter Zoller

    2009-11-19

    We discuss prospects of building hybrid quantum devices involving elements of atomic and molecular physics, quantum optics and solid state elements with the attempt to combine advantages of the respective systems in compatible experimental setups. In particular, we summarize our recent work on quantum hybrid devices and briefly discuss recent ideas for quantum networks. These include interfacing of molecular quantum memory with circuit QED, and using nanomechanical elements strongly coupled to qubits represented by electronic spins, as well as single atoms or atomic ensembles.

  16. Expansion effects on solar wind hybrid simulations

    SciTech Connect (OSTI)

    Parashar, Tulasi N.; Velli, Marco; Goldstein, Bruce E. [NASA Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States)

    2013-06-13

    Ion kinetic simulations of the solar wind using hybrid codes can model local wave input, heating and instabilities, but generally do not include long term evolution effects in the expanding solar wind. We further develop the expanding box model used in earlier studies to include the mirror force effects and study their role in the evolution of the proton distribution functions in the outer corona and inner heliosphere. The mirror force, significant in the acceleration region of the solar wind, is required for consistency with the conservation of magnetic moment of particles in the expanding wind. We present preliminary results from the modified 1D expanding box hybrid (EBHM) simulations.

  17. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHuntingHybridHybrid

  18. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of FindHybridHybrid

  19. Tempe Transportation Division: LNG Turbine Hybrid Electric Buses

    SciTech Connect (OSTI)

    Not Available

    2002-02-01

    Fact sheet describes the performance of liquefied natural gas (LNG) turbine hybrid electric buses used in Tempe's Transportation Division.

  20. Verifying Hybrid Systems Modeled as Timed Automata: A Case Study?

    E-Print Network [OSTI]

    -Vaandrager timed automata model, of the Steam Boiler Controller problem, a hybrid systems benchmark. This pa- per

  1. MTA New York City Transit: Diesel Hybrid Electric Buses

    SciTech Connect (OSTI)

    Not Available

    2003-03-01

    Fact sheet describes the performance of diesel hybrid electric buses used at MTA New York City Transit.

  2. System Simulations of Hybrid Electric Vehicles with Focus on Emissions

    Broader source: Energy.gov [DOE]

    Comparative simulations of hybrid electric vehicles with gasoline and diesel engines will be conducted with focus on emissions control.

  3. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    global market. By reaching their target efficiency of 30%, the hybrid tandem solar cells have the potential

  4. ECE 438 Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric

    E-Print Network [OSTI]

    ECE 438 ­ Electric and Hybrid Vehicles Catalog Description: History of electric traction. Introduction to electric and hybrid-electric vehicle configurations. Vehicle mechanics. Energy sources and storage. Range prediction. Motor for HEVs. Electric drive components. Vehicle transmission system. Credits

  5. The global pairwise approach to radiation hybrid mapping

    E-Print Network [OSTI]

    Hastie, Trevor

    The global pairwise approach to radiation hybrid mapping Robert Tibshirani \\Lambda Laura Lazzeroni maps from radiation hybrid data is pro­ posed. It uses maximization of a pseudo­likelihood based for constructing maps from radiation hybrid data. The method depends upon a novel statistical criterion for iden

  6. Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications

    E-Print Network [OSTI]

    Theoretical insights into multibandgap hybrid perovskites for photovoltaic applications J. Even theoretically the crystalline phases of one of the hybrids relevant for photovoltaic applications, namely CH3NH3, evidencing inversion of band edge states. Keywords: Photovoltaic, Hybrid perovskite, density functional

  7. Hybrid and Plug-In Electric Vehicles (Brochure)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01

    Hybrid and plug-in electric vehicles use electricity as their primary fuel or to improve the efficiency of conventional vehicle designs. These vehicles can be divided into three categories: hybrid electric vehicles (HEVs), plug-in hybrid electric vehicles (PHEVs), all-electric vehicles (EVs). Together, they have great potential to cut U.S. petroleum use and vehicle emissions.

  8. Reinforcement Learning Based Power Management for Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Pedram, Massoud

    Reinforcement Learning Based Power Management for Hybrid Electric Vehicles Xue Lin 1 , Yanzhi Wang combustion engine (ICE) propelled vehicles, hybrid electric vehicles (HEVs) can achieve both higher fuel economy and lower pollution emissions. The HEV consists of a hybrid propulsion system containing one ICE

  9. Adaptive Cruise Control: Hybrid, Distributed, and Now Formally Verified

    E-Print Network [OSTI]

    is that faithful models of distributed car control have both distributed systems and hybrid systems dynamics dynamics. Distributed car control follows a hybrid dynamics, because cars move continuously alongAdaptive Cruise Control: Hybrid, Distributed, and Now Formally Verified Sarah M. Loos, Andr

  10. Approximate bisimulation for a class of stochastic hybrid systems

    E-Print Network [OSTI]

    Pappas, George J.

    , target tracking, robotics, and power systems [35]. The field of stochastic hybrid systems is a veryApproximate bisimulation for a class of stochastic hybrid systems (Invited Paper) Agung Julius of stochastic hybrid systems, namely, the jump linear stochastic systems (JLSS). The idea is based

  11. Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience

    E-Print Network [OSTI]

    Branicky, Michael S.

    Hybrid Dynamical Systems, or HDS: The Ultimate Switching Experience Michael S. Branicky Laboratory concentrated on formalizing the notion of a hybrid system as switching among an indexed collection of dynamical give a quick overview of the area of hybrid systems. I also briefly review the formal definition

  12. HYBRID NECESSARY PRINCIPLE MAURO GARAVELLO AND BENEDETTO PICCOLI

    E-Print Network [OSTI]

    Piccoli, Benedetto

    HYBRID NECESSARY PRINCIPLE MAURO GARAVELLO AND BENEDETTO PICCOLI Key words. Optimal control a hybrid control system and general optimal control problems for this system. We suppose that the switching strategy imposes restrictions on control sets and we provide necessary conditions for an optimal hybrid

  13. Hybrid Interfaces DOI: 10.1002/anie.201000984

    E-Print Network [OSTI]

    Bachmann, Michael

    Hybrid Interfaces DOI: 10.1002/anie.201000984 Microscopic Mechanism of Specific Peptide Adhesion Irbäck, and Wolfhard Janke In the past few years, the interest in hybrid interfaces formed by soft of hybrid systems and potential applications.[1,2] One particularly important problem is the self

  14. Hybrid coupled models of the tropical Pacific: I interannual variability

    E-Print Network [OSTI]

    Tang, Youmin

    Y. Tang Hybrid coupled models of the tropical Pacific: I interannual variability Received: 20 Two hybrid coupled models (HCMs), an intermediate complexity dynamical ocean model cou- pled to either), hybrid models (e.g., Barnett et al. 1993; Balmaseda et al. 1994,1995), and fully coupled general

  15. Hybrid Logical Analyses of the Ambient Thomas Bolander1

    E-Print Network [OSTI]

    Hansen, René Rydhof

    Hybrid Logical Analyses of the Ambient Calculus Thomas Bolander1 and Ren´e Rydhof Hansen2 1 Science, University of Copenhagen rrhansen@diku.dk Abstract. In this paper, hybrid logic is used of action sequences into account, can be formulated in a natural way. We show that hybrid logic is very well

  16. Hybrid Systems: Review and Recent Progress Panos J. Antsaklis

    E-Print Network [OSTI]

    Koutsoukos, Xenofon D.

    Hybrid Systems: Review and Recent Progress Panos J. Antsaklis Department of Electrical Engineering of this volume focuses on hybrid dynamical systems, an area of research that has developed as a result communities. This chapter provides a broad-based introduction to hybrid systems and discusses a number

  17. An Approach for Energy Efficient Execution of Hybrid Parallel Programs

    E-Print Network [OSTI]

    Teo, Yong-Meng

    An Approach for Energy Efficient Execution of Hybrid Parallel Programs Lavanya Ramapantulu system. One of the key challenges for energy efficient execution of hybrid programs is to determine time and energy efficient hardware configurations among a large system configuration space. Given a hybrid program

  18. Energy Efficient Hybrid Separation Processes Angelo Lucia* and Amit Amale

    E-Print Network [OSTI]

    Lucia, Angelo

    Energy Efficient Hybrid Separation Processes Angelo Lucia* and Amit Amale Department of Chemical distillation, adsorption/distillation, and others. In this work, the energy efficiency of hybrid separation the target extract compositions for the extractor and lead to the most energy efficient hybrid separations

  19. Plug-In Hybrid Electric Vehicle Market Introduction Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Market Introduction Study SSuummmmaarryy ooff WWoorrkksshhoopp. #12;ORNL/TM-2008/242 Plug-in Hybrid Electric Vehicle Market Introduction Study SUMMARY OF WORKSHOP The Plug-In Hybrid Electric Vehicle (PHEV) Market Introduction Study Workshop was attended by approximately

  20. Cinematic of Hybrid Electrical Vehicle (V.H.E. CINEMATICS)

    E-Print Network [OSTI]

    Baudoin, Geneviève

    Cinematic of Hybrid Electrical Vehicle (V.H.E. CINEMATICS) Participants: Pr. Abdel Réama Pr. Arben Hybrid electrical vehicle is becoming a necessity to counter the rising price of the traditional for energy efficient hybrid electrical vehicle drive Problématique et objectifs The flux producing current

  1. Plug-In Hybrid Electric Vehicle Value Proposition Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Value Proposition Study Phase 1, Task 3:Phase 1, Task 3: Technic Government or any agency thereof. #12;ORNL/TM-2008/068 Plug-in Hybrid Electric Vehicle Value Proposition The Plug-In Hybrid Electric Vehicle (PHEV) Value Proposition Study is a collaborative effort between

  2. Plug-In Hybrid Electric Vehicle Value Proposition Study

    E-Print Network [OSTI]

    Pennycook, Steve

    Plug-In Hybrid Electric Vehicle Value Proposition Study IInntteerriimm RReeppoorrtt:: PPhhaassee 11 Government or any agency thereof. ORNL/TM-2008/076 #12;Plug-in Hybrid Electric Vehicle Value Proposition 2009 i ACKNOWLEDGEMENTS The Plug-In Hybrid Electric Vehicle (PHEV) Value Proposition Study

  3. Modeling and Simulation of Electric and Hybrid Vehicles

    E-Print Network [OSTI]

    Mi, Chunting "Chris"

    INVITED P A P E R Modeling and Simulation of Electric and Hybrid Vehicles Tools that can model embedded software as well as components, and can automate the details of electric and hybrid vehicle design of electric and hybrid vehicles. Different modeling methods such as physics-based Resistive Companion Form

  4. Optimal Control of Switched Hybrid Systems: A Brief Survey

    E-Print Network [OSTI]

    Antsaklis, Panos

    Optimal Control of Switched Hybrid Systems: A Brief Survey Technical Report of the ISIS Group;1 Optimal Control of Switched Hybrid Systems: A Brief Survey Feng Zhu and Panos J. Antsaklis Department a few. The problem of determining optimal control laws for hybrid systems and in particular for switched

  5. Nonlinear Hybrid Dynamical Systems: Modeling, Optimal Control, and Applications

    E-Print Network [OSTI]

    Stryk, Oskar von

    Nonlinear Hybrid Dynamical Systems: Modeling, Optimal Control, and Applications Martin Buss1¨unchen, Germany Abstract. Nonlinear hybrid dynamical systems are the main focus of this paper. A modeling Introduction The recent interest in nonlinear hybrid dynamical systems has forced the merger of two very

  6. DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT

    E-Print Network [OSTI]

    DESIGN OF AN EXPERIMENTAL FACILITY FOR HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By SHAWN ALEX HERN.1 HYBRID GROUND SOURCE HEAT PUMP SYSTEM DESIGN........................................2-3 2.1.1 Design...............................................................................2-5 2.2 HYBRID GROUND SOURCE HEAT PUMP SYSTEM SIMULATION................................2-9 3

  7. APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO

    E-Print Network [OSTI]

    APPLICATIONS OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS TO BUILDINGS AND BRIDGE DECKS. By MAHADEVAN Chapter Page 1. Introduction 1.1. Overview of hybrid ground source heat pump systems 1.2. Literature review 1.3. Thesis objective and scope 2. Optimal sizing of hybrid ground source heat pump system

  8. Energy Effective 3D Stacked Hybrid NEMFET-CMOS Caches

    E-Print Network [OSTI]

    Cotofana, Sorin

    Energy Effective 3D Stacked Hybrid NEMFET-CMOS Caches Mihai Lefter, Marius Enachescu, George Razvan-stacked hybrid memories as alternative to traditional CMOS SRAMs in L1 and L2 cache implementations and analyse-per-Cycle (IPC) and energy consumption. The 3D hybrid memory cell relies on: (i) a Short Circuit Current Free

  9. Nonlinear evolution of lower hybrid waves Charles F. F. Karney

    E-Print Network [OSTI]

    Karney, Charles

    problem. With typical fields for lower hybrid heating of a tokamak, it is found that large reflections can occur close to the edge of the plasma. I. INTRODUCTION In typical lower hybrid heating schemes, lower hy, and determine the consequences of our results for lower hybrid heating. The plan of this paper i s a s follows

  10. Static Analysis of Sandwich Plates by Hybrid Finite Elements

    E-Print Network [OSTI]

    Paris-Sud XI, Université de

    Static Analysis of Sandwich Plates by Hybrid Finite Elements V. Manet and W.-S. Han Materials analysis tool. The subject of the present work concerns the development of hybrid sandwich finite elements into acount. The present work concerns the development of hybrid sandwich finite elements mod- elling

  11. Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy

    E-Print Network [OSTI]

    Wood, Stephen L.

    i Hybrid Renewable Energy Systems for a Dynamically Positioned Buoy by Robert Sean Pagliari ________________________ #12; ii We the undersigned committee hereby approve the attached thesis Hybrid Renewable Energy, College of Engineering #12; iii Abstract Hybrid Renewable Energy Systems for a Dynamically Positioned

  12. Applied Formal Methods -From CSP to Executable Hybrid Specifications

    E-Print Network [OSTI]

    Peleska, Jan - Fachbereich 3

    research about Hybrid Statecharts Test Automation for Hybrid Systems motivates research about Hybrid Low Integrated Modular Avioncis (A380) (Verified Systems 2002...) Development of Railway Control Systems from VERIFIED SYSTEMS INTERNATIONAL GMBH #12;Specification-Based Hard Real-Time Testing Building blocks

  13. Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

    DOE Patents [OSTI]

    Bockelmann, Thomas R. (Battle Creek, MI); Hope, Mark E. (Marshall, MI); Zou, Zhanjiang (Battle Creek, MI); Kang, Xiaosong (Battle Creek, MI)

    2009-02-10

    A battery control system for hybrid vehicle includes a hybrid powertrain battery, a vehicle accessory battery, and a prime mover driven generator adapted to charge the vehicle accessory battery. A detecting arrangement is configured to monitor the vehicle accessory battery's state of charge. A controller is configured to activate the prime mover to drive the generator and recharge the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a first predetermined level, or transfer electrical power from the hybrid powertrain battery to the vehicle accessory battery in response to the vehicle accessory battery's state of charge falling below a second predetermined level. The invention further includes a method for controlling a hybrid vehicle powertrain system.

  14. INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1998 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1998.

    E-Print Network [OSTI]

    Liskiewicz, Maciej

    INDEX TO VIRGINIA CORN HYBRID AND MANAGEMENT TRIALS 1998 SECTION I. VIRGINIA CORN HYBRID TRIALS IN 1998. Companies participating in the 1998 Corn Hybrid Trials 2 1998 Virginia Corn Hybird Plot, and 1998. 36 SECTION II. EVALUATION OF DOUBLECROP CORN UNDER IRRIGATION IN EASTERN VIRGINIA. Table 27

  15. DIG In Situ Hybridization Protocol (with detergent)

    E-Print Network [OSTI]

    at 65o C for 1 hour. You can reuse hybridization solution for 1-2 months if you store it at -20o C for 5 minutes. Chill on ice. Pipet carefully onto #12;tissue and coverslip with Hybrislip plastic cover, 0.1% Triton X-100 *Block 1 hour in B2 GOAT in vertical slide mailers. You can reuse blocking

  16. $?$ Meson Decays of Heavy Hybrid Mesons

    E-Print Network [OSTI]

    Liang Zhang; Peng-Zhi Huang

    2015-05-04

    We calculate the $\\rho$ meson couplings between heavy hybrid doublets H^h/S^h/M^h/T^h and the ordinary q\\bar{Q} doublets in the framework of light-cone QCD sum rule. The sum rules obtained rely mildly on the Borel parameters in their working regions. The resulting coupling constants are rather small in most cases.

  17. Hybrid Molten Salt Reactor (HMSR) System Study

    SciTech Connect (OSTI)

    Woolley, Robert D; Miller, Laurence F

    2014-04-01

    Can the hybrid system combination of (1) a critical fission Molten Salt Reactor (MSR) having a thermal spectrum and a high Conversion Ratio (CR) with (2) an external source of high energy neutrons provide an attractive solution to the world's expanding demand for energy? The present study indicates the answer is an emphatic yes.

  18. Hybrid anode for semiconductor radiation detectors

    DOE Patents [OSTI]

    Yang, Ge; Bolotnikov, Aleksey E; Camarda, Guiseppe; Cui, Yonggang; Hossain, Anwar; Kim, Ki Hyun; James, Ralph B

    2013-11-19

    The present invention relates to a novel hybrid anode configuration for a radiation detector that effectively reduces the edge effect of surface defects on the internal electric field in compound semiconductor detectors by focusing the internal electric field of the detector and redirecting drifting carriers away from the side surfaces of the semiconductor toward the collection electrode(s).

  19. Formal Verification of Hybrid Systems Rajeev Alur

    E-Print Network [OSTI]

    Alur, Rajeev

    , of the system un- der design, and performs extensive analysis with respect to correctness requirements-1-4503-0714-7/11/10 ...$5.00. mathematical model for design of embedded control systems is hybrid systems that combines for dynamical systems. Such models can capture both the controller -- the system under design, and the plant

  20. Probing Compositional Variation within Hybrid Nanostructures

    SciTech Connect (OSTI)

    Yuhas, Benjamin D.; Habas, Susan E.; Fakra, Sirine C.; Mokari, Taleb

    2010-06-22

    We present a detailed analysis of the structural and magnetic properties of solution-grown PtCo-CdS hybrid structures in comparison to similar free-standing PtCo alloy nanoparticles. X-ray absorption spectroscopy is utilized as a sensitive probe for identifying subtle differences in the structure of the hybrid materials. We found that the growth of bimetallic tips on a CdS nanorod substrate leads to a more complex nanoparticle structure composed of a PtCo alloy core and thin CoO shell. The core-shell architecture is an unexpected consequence of the different nanoparticle growth mechanism on the nanorod tip, as compared to free growth in solution. Magnetic measurements indicate that the PtCo-CdS hybrid structures are superparamagnetic despite the presence of a CoO shell. The use of X-ray spectroscopic techniques to detect minute differences in atomic structure and bonding in complex nanosystems makes it possible to better understand and predict catalytic or magnetic properties for nanoscale bimetallic hybrid materials.

  1. A Hybrid Approach to Conjunctive Partial Deduction

    E-Print Network [OSTI]

    Vidal, Germán

    online approach where all termination decisions are taken on-the-fly. In contrast, offline partialA Hybrid Approach to Conjunctive Partial Deduction Germ´an Vidal MiST, DSIC, Universidad Polit´ecnica de Valencia, Spain gvidal@dsic.upv.es Abstract. Conjunctive partial deduction is a well

  2. Hybrid switch for resonant power converters

    DOE Patents [OSTI]

    Lai, Jih-Sheng; Yu, Wensong

    2014-09-09

    A hybrid switch comprising two semiconductor switches connected in parallel but having different voltage drop characteristics as a function of current facilitates attainment of zero voltage switching and reduces conduction losses to complement reduction of switching losses achieved through zero voltage switching in power converters such as high-current inverters.

  3. Hybrid Heat Pump Design and Application 

    E-Print Network [OSTI]

    Wagner, J. R.; Koebberman, W. F.

    1985-01-01

    The Hybrid Heat Pump (HHP) converts industrial waste heat into process steam. Waste heat at temperatures as low as approximately 200°F can be used. Steam output covers a range between 12,000 Ib/h and 50,000 Ib/h, depending on the application...

  4. Glueballs, Hybrids and the Standard Model

    E-Print Network [OSTI]

    Bonn, Universität

    Glueballs, Hybrids and the Standard Model: Hadron '97 Summary (Experiment) Eberhard Klempt views. 1 Introduction The role of gluons in hadron spectroscopy is the continuing theme of the HADRON news on the possibilty that the frontiers of the Standard Model may have been reached or surpassed

  5. Ultralight Solar Powered Hybrid Research Drone

    E-Print Network [OSTI]

    Singer, Csaba

    2013-01-01

    A planetary research drone is proposed, which is capable for vertical takeoff and landing. A hybrid flight concept utilizing static lift enables the exploration over ground. The static lift is achieved with a lighter than CO2 gas like air, He or H2.

  6. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E.; Pollard, Martin J.; Elkin, Christopher J.

    2006-12-12

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are: a method of assembling the hybrid magnetic plates, a high throughput protocol featuring the hybrid magnetic structure, and other embodiments of the ferromagnetic pole shape, attachment and adapter interfaces for adapting the use of the hybrid magnetic structure for use with liquid handling and other robots for use in high throughput processes.

  7. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E; Pollard, Martin J; Elkin, Christopher J

    2005-10-11

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetizable molecular structures and targets. Also disclosed are: a method of assembling the hybrid magnetic plates, a high throughput protocol featuring the hybrid magnetic structure, and other embodiments of the ferromagnetic pole shape, attachment and adapter interfaces for adapting the use of the hybrid magnetic structure for use with liquid handling and other robots for use in high throughput processes.

  8. Hybrid meson decay from lattice QCD

    E-Print Network [OSTI]

    Ziwen Fu

    2012-09-10

    Besides the conventional hadrons containing valence quarks and valence antiquarks, quantum chromodynamics (QCD) suggests the existence of the hybrid hadrons containing valence gluons in addition to the quarks and antiquarks, and some experiments may have found some. A decisive experimental confirmation of its existence, however, is still needed. At present, lattice simulations have offered the practicable ways of theoretically guiding us to search for the hybrid states. In this dissertation, we study the spectroscopy and the decay rate of the heavy hybrid mesons made of a heavy $b$ quark, a heavy $\\bar b$ antiquark, and a gluon ($b\\bar{b}g$) to selected channels, and use lattice methods to extract the transition matrix elements in full QCD. We are particular interested in the spin-exotic hybrid mesons. For sufficiently heavy quarks (e.g., $b$ quark), we use the leading Born-Oppenheimer (LBO) approximation to calculate the static potential energy at all $b\\bar{b}$ separations. Then, by solving the Schr\\"odinger equation with this potential, we reconstruct the motion of the heavy quarks. In a similar way we can determine decay rates. In this dissertation, we use the numerical lattice method to calculate the mass of the $f_0$ meson at a single lattice spacing and light quark mass, namely, $m_{f_0} = (768 \\pm 136)$ MeV. Most of all we consider the decay channels involving the production of a scalar meson. We obtain the partial decay rate ($\\Gamma$) for the channel $ H \\rightarrow \\chi_b + \\pi + \\pi $, namely, $ \\Gamma = 3.62(98)$ MeV. All of our results are consistent with those of other researchers. Knowledge of the masses and the decay rates should help us considerably in experimental searches for the hybrid mesons.

  9. Fact #849: December 1, 2014 Midsize Hybrid Cars Averaged 51% Better Fuel Economy than Midsize Non-Hybrid Cars in 2014- Dataset

    Broader source: Energy.gov [DOE]

    Excel file with dataset for Fact #849: December 1, 2014 Midsize Hybrid Cars Averaged 51% Better Fuel Economy than Midsize Non-Hybrid Cars in 2014

  10. Fuelcell-Hybrid Mine loader (LHD)

    SciTech Connect (OSTI)

    James L Dippo; Tim Erikson; Kris Hess

    2009-07-10

    The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantages (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.

  11. Hybrid least squares multivariate spectral analysis methods

    DOE Patents [OSTI]

    Haaland, David M.

    2004-03-23

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following prediction or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The hybrid method herein means a combination of an initial calibration step with subsequent analysis by an inverse multivariate analysis method. A spectral shape herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The shape can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  12. Hybrid anodes for redox flow batteries

    DOE Patents [OSTI]

    Wang, Wei; Xiao, Jie; Wei, Xiaoliang; Liu, Jun; Sprenkle, Vincent L.

    2015-12-15

    RFBs having solid hybrid electrodes can address at least the problems of active material consumption, electrode passivation, and metal electrode dendrite growth that can be characteristic of traditional batteries, especially those operating at high current densities. The RFBs each have a first half cell containing a first redox couple dissolved in a solution or contained in a suspension. The solution or suspension can flow from a reservoir to the first half cell. A second half cell contains the solid hybrid electrode, which has a first electrode connected to a second electrode, thereby resulting in an equipotential between the first and second electrodes. The first and second half cells are separated by a separator or membrane.

  13. Hybrid anodes for redox flow batteries

    DOE Patents [OSTI]

    Wang, Wei; Xiao, Jie; Wei, Xiaoliang; Liu, Jun; Sprenkle, Vincent L.

    2015-12-22

    RFBs having solid hybrid electrodes can address at least the problems of active material consumption, electrode passivation, and metal electrode dendrite growth that can be characteristic of traditional batteries, especially those operating at high current densities. The RFBs each have a first half cell containing a first redox couple dissolved in a solution or contained in a suspension. The solution or suspension can flow from a reservoir to the first half cell. A second half cell contains the solid hybrid electrode, which has a first electrode connected to a second electrode, thereby resulting in an equipotential between the first and second electrodes. The first and second half cells are separated by a separator or membrane.

  14. Hybrid Energy System Modeling in Modelica

    SciTech Connect (OSTI)

    William R. Binder; Christiaan J. J. Paredis; Humberto E. Garcia

    2014-03-01

    In this paper, a Hybrid Energy System (HES) configuration is modeled in Modelica. Hybrid Energy Systems (HES) have as their defining characteristic the use of one or more energy inputs, combined with the potential for multiple energy outputs. Compared to traditional energy systems, HES provide additional operational flexibility so that high variability in both energy production and consumption levels can be absorbed more effectively. This is particularly important when including renewable energy sources, whose output levels are inherently variable, determined by nature. The specific HES configuration modeled in this paper include two energy inputs: a nuclear plant, and a series of wind turbines. In addition, the system produces two energy outputs: electricity and synthetic fuel. The models are verified through simulations of the individual components, and the system as a whole. The simulations are performed for a range of component sizes, operating conditions, and control schemes.

  15. Hybrid least squares multivariate spectral analysis methods

    DOE Patents [OSTI]

    Haaland, David M. (Albuquerque, NM)

    2002-01-01

    A set of hybrid least squares multivariate spectral analysis methods in which spectral shapes of components or effects not present in the original calibration step are added in a following estimation or calibration step to improve the accuracy of the estimation of the amount of the original components in the sampled mixture. The "hybrid" method herein means a combination of an initial classical least squares analysis calibration step with subsequent analysis by an inverse multivariate analysis method. A "spectral shape" herein means normally the spectral shape of a non-calibrated chemical component in the sample mixture but can also mean the spectral shapes of other sources of spectral variation, including temperature drift, shifts between spectrometers, spectrometer drift, etc. The "shape" can be continuous, discontinuous, or even discrete points illustrative of the particular effect.

  16. Hybrid Lithium Niobate and Silicon Photonic Waveguides

    E-Print Network [OSTI]

    Weigel, Peter O; DeRose, Christopher; Pomerene, Andrew T; Starbuck, Andrew L; Lentine, Anthony L; Stenger, Vincent; Mookherjea, Shayan

    2015-01-01

    We describe a hybrid lithium niobate (LN) / silicon (Si) optical waveguiding platform at near infrared wavelengths. Various optical circuit elements, such as waveguides, bends, and couplers are demonstrated in two hybrid cross sections, A and B, with different LN confinement factors (32% and 90%, respectively) of the fundamental quasi TE mode. Such a large LN confinement factor is achieved with adiabatic tapers that preserve the symmetry of the fundamental quasi TE mode and prevent mode rotation. We find the average propagation loss in cross section B to be 4.3 dB/cm with a standard deviation of 2.1 dB/cm, comparable with a 3 um SiO2 clad (in place of LN) Si waveguide whose average propagation loss was 3.1 dB/cm with a standard deviation of 2.1 dB/cm.

  17. System for controlling a hybrid energy system

    DOE Patents [OSTI]

    Hoff, Brian D.; Akasam, Sivaprasad

    2013-01-29

    A method includes identifying a first operating sequence of a repeated operation of at least one non-traction load. The method also includes determining first and second parameters respectively indicative of a requested energy and output energy of the at least one non-traction load and comparing the determined first and second parameters at a plurality of time increments of the first operating sequence. The method also includes determining a third parameter of the hybrid energy system indicative of energy regenerated from the at least one non-traction load and monitoring the third parameter at the plurality of time increments of the first operating sequence. The method also includes determining at least one of an energy deficiency or an energy surplus associated with the non-traction load of the hybrid energy system and selectively adjusting energy stored within the storage device during at least a portion of a second operating sequence.

  18. An innovation and policy agenda for commercially competitive plug-in hybrid electric vehicles This article has been downloaded from IOPscience. Please scroll down to see the full text article.

    E-Print Network [OSTI]

    Kammen, Daniel M.

    in California during both peak and off-peak hours even with modest gasoline prices and real-time electricity fall by at least a factor of two, or gasoline prices double, the present value of fuel savings companies now offer to convert HEVs (such as the Toyota Prius and Ford Escape models) into PHEVs and plan

  19. New hybrid polysilane/polysiloxane nanocomposites

    SciTech Connect (OSTI)

    Jamison, G.M.; Loy, D.A. [Sandia National Labs., Albuquerque, NM (United States); [Stanford Univ., CA (United States); Opperman, K.A.; Beach, J.V. [Sandia National Labs., Albuquerque, NM (United States)

    1996-12-31

    (Alkoxysilyl)propyl-functionalized polysilanes 2a-c are generated by the free radical-initiated hydrosilation of allylsilanes 1a-c with polyphenylsilane. The latent sol-gel alkoxysilane residues undergo hydrolysis-poly-condensation under acid-catalyzed conditions to form new hybrid organic-inorganic nanocomposites 3a-c, which can be processed as xerogels or aerogels. Spectral and bulk characterization of the new materials will be discussed.

  20. Microgravity-Hybrid Microgravity | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsource HistoryScenariosMarysvilleMicrogravity-Hybrid Microgravity Jump to: navigation,

  1. Hybrid Electric Systems | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE:FinancingPetroleum12,ExecutiveFinancingR Walls - BuildingofDepartmentHybird Geothemal-SolarHybrid

  2. Masses of Flavor Singlet Hybrid Baryons

    E-Print Network [OSTI]

    Olaf Kittel; Glennys R. Farrar

    2000-10-17

    We study the possibility that four iso-singlet baryons $\\Lambda_s(1405)$ $J^P=1/2^{-}$, $\\Lambda_s(1520)$ $J^P=3/2^{-}$, $\\Lambda_c(2593)$ $J^P=1/2^{-}$ and $\\Lambda_c(2625)$ $J^P=3/2^{-}$ are hybrids: three quark one gluon states (udsg). We calculate the mass separations of the candidates, using a degeneracy-lifting hyperfine interaction from an effective single colored gluon exchange between the constituents. The correct ordering of masses is obtained (contrary to the case for the conventional interpretation as 3 quarks with L=1) and the splittings are plausible. The parity of these states is not measured, only assumed to be negative. In the hybrid picture, the lightest states are parity even and the parity odd counterparts lie about 300 MeV higher. Thus the hybrid ansatz predicts that either the parity of the $\\Lambda(1405)$ etc is positive, or that there are undiscovered positive parity states about 300 MeV lower. We also remark that in this picture, the H-dibaryon mass may be around 1.5 GeV.

  3. Secure Data Processing in a Hybrid Cloud

    E-Print Network [OSTI]

    Khadilkar, Vaibhav; Thuraisingham, Bhavani; Mehrotra, Sharad

    2011-01-01

    Cloud computing has made it possible for a user to be able to select a computing service precisely when needed. However, certain factors such as security of data and regulatory issues will impact a user's choice of using such a service. A solution to these problems is the use of a hybrid cloud that combines a user's local computing capabilities (for mission- or organization-critical tasks) with a public cloud (for less influential tasks). We foresee three challenges that must be overcome before the adoption of a hybrid cloud approach: 1) data design: How to partition relations in a hybrid cloud? The solution to this problem must account for the sensitivity of attributes in a relation as well as the workload of a user; 2) data security: How to protect a user's data in a public cloud with encryption while enabling query processing over this encrypted data? and 3) query processing: How to execute queries efficiently over both, encrypted and unencrypted data? This paper addresses these challenges and incorporates...

  4. Hybrid Estimation of CMB Polarization Power Spectra

    E-Print Network [OSTI]

    G. Efstathiou

    2006-01-05

    This paper generalises the hybrid power spectrum estimator developed in Efstathiou (2004a) to the estimation of polarization power spectra of the cosmic microwave background radiation. The hybrid power spectrum estimator is unbiased and we show that it is close to optimal at all multipoles, provided the pixel noise satisfies certain reasonable constraints. Furthermore, the hybrid estimator is computationally fast and can easily be incorporated in a Monte-Carlo chain for Planck-sized data sets. Simple formulae are given for the covariance matrices, including instrumental noise, and these are tested extensively against numerical simulations. We compare the behaviour of simple pseudo-Cell estimates with maximum likelihood estimates at low multipoles. For realistic sky cuts, maximum likelihood estimates reduce very significantly the mixing of E and B modes. To achieve limits on the scalar-tensor ratio of r<<0.1 from sky maps with realistic sky cuts, maximum likelihood methods, or pseudo-Cell estimators based on unambiguous E and B modes, will be essential.

  5. Hybrid meson masses and the correlated Gaussian basis

    E-Print Network [OSTI]

    Vincent Mathieu

    2009-07-06

    We revisited a model for charmonium hybrid meson with a magnetic gluon [Yu. S. Kalashnikova and A. V. Nefediev, Phys. Rev. D {\\bf 77}, 054025 (2008)] and improved the numerical calculations. These improvements support the hybrid meson interpretation of X(4260). Within the same model, we computed the hybrid meson mass with an electric gluon which is resolved to be lighter. Relativistic effects and coupling channels decreased also the mass.

  6. Hybrid quantum-classical models as constrained quantum systems

    E-Print Network [OSTI]

    M. Radonjic; S. Prvanovic; N. Buric

    2012-06-07

    Constrained Hamiltonian description of the classical limit is utilized in order to derive consistent dynamical equations for hybrid quantum-classical systems. Starting with a compound quantum system in the Hamiltonian formulation conditions for classical behavior are imposed on one of its subsystems and the corresponding hybrid dynamical equations are derived. The presented formalism suggests that the hybrid systems have properties that are not exhausted by those of quantum and classical systems.

  7. Optimum Performance of Direct Hydrogen Hybrid Fuel Cell Vehicles

    E-Print Network [OSTI]

    Zhao, Hengbing; Burke, Andy

    2009-01-01

    etc. , PEM Fuel Cell System Optimization, Proceedings of thesystem, hybrid fuel cell vehicle, optimization, dynamic,a scalable fuel cell system optimization model [14

  8. Case Study: Ebus Hybrid Electric Buses and Trolleys

    SciTech Connect (OSTI)

    Barnitt, R.

    2006-07-01

    Evaluation focuses on the demonstration of hybrid electric buses and trolleys produced by Ebus Inc. at the Indianapolis Transportation Corporation and the Knoxville Area Transit.

  9. Marine Hybrid Propulsion Market Revenue is anticipated to Reach...

    Open Energy Info (EERE)

    ferry operators are the major adopters of marine hybrid propulsion systems across the world. These vessels primarily operate in coastal areas and inland waterways, where emission...

  10. Magnetic pinning of flux lattice in superconducting-nanomagnet hybrids

    E-Print Network [OSTI]

    2011-01-01

    of flux lattice in superconducting-nanomagnet hybrids D.This plays a key role in superconductor properties such as ?ingre- dients in superconductor based applications. The

  11. Recent advances in picosecond and hybrid femtosecond/picosecond...

    Office of Scientific and Technical Information (OSTI)

    Recent advances in picosecond and hybrid femtosecondpicosecond CARS techniques for gas phase analysis. Citation Details In-Document Search Title: Recent advances in picosecond and...

  12. Hybrid solar collector using nonimaging optics and photovoltaic components

    E-Print Network [OSTI]

    2015-01-01

    Evaluation of On-Board Photovoltaic Modules Options forthe Temperature Dependence of Photovoltaic Module ElectricalChow, T. T. , "A review on photovoltaic/thermal hybrid solar

  13. Oligo and Poly-thiophene/Zno Hybrid Nanowire Solar Cells

    E-Print Network [OSTI]

    Briseno, Alejandro L.

    2010-01-01

    ZnO Hybrid Nanowire Solar Cells Alejandro L. Briseno, Thomashybrid single nanowire solar cell. End-functionalized oligo-Individual nanowire solar cell devices exhibited well-

  14. Vehicle Technologies Office - AVTA: Hybrid-Electric Tractor Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Tractor Vehicles Vehicle Technologies Office - AVTA: Hybrid-Electric Tractor Vehicles The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  15. Hybrid supramolecular and colloidal hydrogels bridging multiple length scales

    E-Print Network [OSTI]

    Jane?ek, Emma-Rose; McKee, Jason R.; Tan, Cindy S. Y.; Nykänen, Antti; Kettunen, Marjo; Laine, Janne; Ikkala, Olli; Scherman, Oren A.

    2015-03-13

    Hybrid nanocomposites were constructed based on colloidal nanofibrillar hydrogels with interpenetrating supramolecular hydrogels, displaying enhanced rheological yield strain and a synergistic improvement in storage modulus. The supramolecular...

  16. High performance hybrid magnetic structure for biotechnology applications

    DOE Patents [OSTI]

    Humphries, David E. (El Cerrito, CA); Pollard, Martin J. (El Cerrito, CA); Elkin, Christopher J. (San Ramon, CA)

    2009-02-03

    The present disclosure provides a high performance hybrid magnetic structure made from a combination of permanent magnets and ferromagnetic pole materials which are assembled in a predetermined array. The hybrid magnetic structure provides means for separation and other biotechnology applications involving holding, manipulation, or separation of magnetic or magnetizable molecular structures and targets. Also disclosed are further improvements to aspects of the hybrid magnetic structure, including additional elements and for adapting the use of the hybrid magnetic structure for use in biotechnology and high throughput processes.

  17. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Washington D.C. vssarravt068miyasato2010p.pdf More Documents & Publications Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation Vehicle...

  18. Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Evaluation arravt068vssmiyasato2011o .pdf More Documents & Publications Plug-In Hybrid Electric Medium Duty Commercial Fleet Demonstration and Evaluation SCAQMD:Plug-In...

  19. AVTA: Idaho National Laboratory Experimental Hybrid Shuttle Bus Testing Results

    Broader source: Energy.gov [DOE]

    The following report describes testing results of the Idaho National Laboratory's demonstration hybrid shuttle bus. This research was conducted by Idaho National Laboratory.

  20. Modular hybrid plasma reactor and related systems and methods...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Patent Search Success Stories News Events Find More Like This Return to Search Modular hybrid plasma reactor and related systems and methods United States Patent Patent Number:...

  1. Modular hybrid plasma reactor and related systems and methods...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    (27) Visual Patent Search Success Stories News Events Return to Search Modular hybrid plasma reactor and related systems and methods United States Patent Application ***...

  2. 2011 Annual Merit Review Results Report - Hybrid and Vehicle...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    01.pdf More Documents & Publications 2012 Annual Merit Review Results Report - Hybrid Vehicle Systems Technologies 2012 Annual Merit Review Results Report - Introduction 2012...

  3. Vehicle Technologies Office - AVTA: Hybrid-Electric Delivery...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Delivery Vehicles Vehicle Technologies Office - AVTA: Hybrid-Electric Delivery Vehicles The Vehicle Technologies Office's Advanced Vehicle Testing Activity carries out testing on a...

  4. Hybrid Air-Cooled Condenser - Energy Innovation Portal

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Hybrid Air-Cooled Condenser National Renewable Energy Laboratory Contact NREL About This Technology Technology Marketing Summary Geothermal energy has been a viable energy source...

  5. Ultracapacitor Applications and Evaluation for Hybrid Electric Vehicles (Presentation)

    SciTech Connect (OSTI)

    Pesaran, A.; Gonder, J.; Keyser, M.

    2009-04-01

    Describes the use of ultracapacitors in advanced hybrid and electric vehicles and discusses thermal and electrical testing of lithium ion capacitors for HEV applications.

  6. Ultracapacitor Technologies and Application in Hybrid and Electric Vehicles

    E-Print Network [OSTI]

    Burke, Andy

    2009-01-01

    Moderate Hybrid-electric Vehicles. ESScap06, Switzerland,GH. SIMPLEV: A Simple Electric Vehicle Simulation Program-20 th International Electric Vehicle Symposium, Long Beach,

  7. Opportunities for Micropower and Fuel Cell/Gas Turbine Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    I, January 2000 Opportunities for Micropower and Fuel CellGas Turbine Hybrid Systems in Industrial Applications - Volume I, January 2000 In this January 2000 report, Arthur D....

  8. The ArvinMeritor Dual Mode Hybrid Powertrain (DMHP): Opportunities...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ArvinMeritor Dual Mode Hybrid Powertrain (DMHP): Opportunities and Potential for Systems Optimization 2011 DOE Hydrogen and Fuel Cells Program, and Vehicle Technologies Program...

  9. Documentation of Hybrid Hydride Model for Incorporation into...

    Energy Savers [EERE]

    does not currently solve the stress state that forms dynamically in the precipitate or matrix surrounding the precipitate. A path forward is presented. DocHybridHydrid...

  10. Development of Design and Simulation Tool for Hybrid Geothermal...

    Open Energy Info (EERE)

    Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title...

  11. CRADA Final Report: Process development for hybrid solar cells

    E-Print Network [OSTI]

    Ager, Joel W

    2011-01-01

    the U.S. economy. The solar cell’s target market is the highmarket. By reaching their target efficiency of 30%, the hybrid tandem solar

  12. Chassis Dynamometer Testing of Parallel and Series Diesel Hybrid Buses

    Broader source: Energy.gov [DOE]

    Emissions and fuel economy data were studied from tests on four diesel and diesel hybrid transit buses using the Houston Metro Bus Cycle.

  13. CTTRANSIT Operates New England's First Fuel Cell Hybrid Bus ...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Bus DOE Hydrogen Program (Fact Sheet) 42407.pdf More Documents & Publications Connecticut Transit (CTTRANSIT) Fuel Cell Transit Bus: Third Evaluation Report and Appendices...

  14. Los Alamos explores hybrid ultrasmall gold nanocluster for enzymatic...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Alamos explores hybrid ultrasmall gold nanocluster for enzymatic fuel cells With fossil-fuel sources dwindling, better biofuel cell design is a strong candidate in the energy...

  15. Hybrid method for aerodynamic shape optimization in automotive industry

    E-Print Network [OSTI]

    Dumas, Laurent

    Hybrid method for aerodynamic shape optimization in automotive industry Freedeerique Muyl precisely the reduction of their drag coefficient, becomes one of the main topics of the automotive research

  16. Development and Characterization of Texas Bluegrass x Kentucky Bluegrass Interspecific Hybrids for the Southern United States 

    E-Print Network [OSTI]

    Meeks, Meghyn

    2015-05-08

    of this research were to 1) develop new interspecific hybrid bluegrasses and optimize a seed germination technique, 2) use flow cytometry and molecular markers for the characterization of hybrid progeny, and 3) evaluate the growth response and performance of hybrid...

  17. Aalborg Universitet Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic-Battery-

    E-Print Network [OSTI]

    Vasquez, Juan Carlos

    Aalborg Universitet Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic). Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic-Battery-Hydropower Microgrids, pp. 1573-1580. Frequency Stability of Hierarchically Controlled Hybrid Photovoltaic

  18. Symbolism in California’s Early Market for Hybrid Electric Vehicles

    E-Print Network [OSTI]

    Heffner, Reid R.; Kurani, Kenneth S; Turrentine, Tom

    2008-01-01

    2006. The Dollars and Sense of Hybrid Cars. AvailableSurvey of Oregon Hybrid Gas-Electric Car Owners. Portland.cars/new-cars/ high-cost-of-hybrid-vehicles-406/overview.htm

  19. Semiotics and Advanced Vehicles: What Hybrid Electric Vehicles (HEVs) Mean and Why it Matters to Consumers

    E-Print Network [OSTI]

    Heffner, Reid R.

    2007-01-01

    Bradford, S. (2003) Are Hybrid Cars Worth It? Smartmoney 28p. C1. Hakim, D. (2005b) Hybrid-Car Tinkerers Scoff at No-Dollars and Sense of Hybrid Cars. Available from: http://

  20. Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems

    E-Print Network [OSTI]

    : Formal Verification, Abstraction, Model Checking, Hybrid Systems, Refinement, Counterexamples #12Abstraction and Counterexample-Guided Refinement in Model Checking of Hybrid Systems Edmund Clarke a counterexample generated by the model checker. For hybrid systems, analysis of the counterexample requires

  1. Fact #722: April 9, 2012 Hybrid Vehicles Can Save Money over...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    2: April 9, 2012 Hybrid Vehicles Can Save Money over Time Fact 722: April 9, 2012 Hybrid Vehicles Can Save Money over Time Hybrid vehicles are typically very well equipped with...

  2. Fact #678: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    8: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles, 2010 Fact 678: June 6, 2011 Manufacturer Market Share of Hybrid Vehicles, 2010 From a total of 274,210 hybrid vehicle...

  3. A CLASSIFICATION SCHEME FOR THE COMMON PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS

    E-Print Network [OSTI]

    Holtz, Michael J.

    2011-01-01

    Passive and Hybrid Heating Cooling Systems Michael]. Holtz,PASSIVE AND HYBRID HEATING AND COOLING SYSTEMS Michael J.of passive and hybrid space heating and cooling systems are

  4. Evaluation of Greenhouse Gas and Criteria Emissions From Conventional and Hybrid Off-Road Equipment

    E-Print Network [OSTI]

    Cao, Tanfeng

    2014-01-01

    Class 8 Diesel Electric Hybrid Tractor Evaluation: 13-MonthClass 8 Diesel Electric Hybrid Tractor Evaluation: 13-MonthClass 8 Diesel Electric Hybrid Tractor Evaluation: 13-Month

  5. Hydraulic Hybrid Parcel Delivery Truck Deployment, Testing & Demonstration

    SciTech Connect (OSTI)

    Gallo, Jean-Baptiste

    2014-03-07

    Although hydraulic hybrid systems have shown promise over the last few years, commercial deployment of these systems has primarily been limited to Class 8 refuse trucks. In 2005, the Hybrid Truck Users Forum initiated the Parcel Delivery Working Group including the largest parcel delivery fleets in North America. The goal of the working group was to evaluate and accelerate commercialization of hydraulic hybrid technology for parcel delivery vehicles. FedEx Ground, Purolator and United Parcel Service (UPS) took delivery of the world’s first commercially available hydraulic hybrid parcel delivery trucks in early 2012. The vehicle chassis includes a Parker Hannifin hydraulic hybrid drive system, integrated and assembled by Freightliner Custom Chassis Corp., with a body installed by Morgan Olson. With funding from the U.S. Department of Energy, CALSTART and its project partners assessed the performance, reliability, maintainability and fleet acceptance of three pre-production Class 6 hydraulic hybrid parcel delivery vehicles using information and data from in-use data collection and on-road testing. This document reports on the deployment of these vehicles operated by FedEx Ground, Purolator and UPS. The results presented provide a comprehensive overview of the performance of commercial hydraulic hybrid vehicles in parcel delivery applications. This project also informs fleets and manufacturers on the overall performance of hydraulic hybrid vehicles, provides insights on how the technology can be both improved and more effectively used. The key findings and recommendations of this project fall into four major categories: -Performance, -Fleet deployment, -Maintenance, -Business case. Hydraulic hybrid technology is relatively new to the market, as commercial vehicles have been introduced only in the past few years in refuse and parcel delivery applications. Successful demonstration could pave the way for additional purchases of hydraulic hybrid vehicles throughout the trucking industry. By providing unbiased, third-party assessment of this “hybrid without batteries” technology, this report offers relevant, timely and valuable information to the industry.

  6. Transport Test Problems for Hybrid Methods Development

    SciTech Connect (OSTI)

    Shaver, Mark W.; Miller, Erin A.; Wittman, Richard S.; McDonald, Benjamin S.

    2011-12-28

    This report presents 9 test problems to guide testing and development of hybrid calculations for the ADVANTG code at ORNL. These test cases can be used for comparing different types of radiation transport calculations, as well as for guiding the development of variance reduction methods. Cases are drawn primarily from existing or previous calculations with a preference for cases which include experimental data, or otherwise have results with a high level of confidence, are non-sensitive, and represent problem sets of interest to NA-22.

  7. Technique for Measuring Hybrid Electronic Component Reliability

    SciTech Connect (OSTI)

    Green, C.C.; Hernandez, C.L.; Hosking, F.M.; Robinson, D.; Rutherford, B.; Uribe, F.

    1999-01-01

    Materials compatibility studies of aged, engineered materials and hardware are critical to understanding and predicting component reliability, particularly for systems with extended stockpile life requirements. Nondestructive testing capabilities for component reliability would significantly enhance lifetime predictions. For example, if the detection of crack propagation through a solder joint can be demonstrated, this technique could be used to develop baseline information to statistically determine solder joint lifelengths. This report will investigate high frequency signal response techniques for nondestructively evaluating the electrical behavior of thick film hybrid transmission lines.

  8. Dueco Plug-In Hybrid Engines

    SciTech Connect (OSTI)

    Phillip Eidler

    2011-09-30

    Dueco, a final stage manufacture of utility trucks, was awarded a congressionally directed cost shared contract to develop, test, validate, and deploy several PHEV utility trucks. Odyne will be the primary subcontractor responsible for all aspects of the hybrid system including its design and installation on a truck chassis. Key objectives in this program include developing a better understanding of the storage device and system capability; improve aspects of the existing design, optimization of system and power train components, and prototype evaluation. This two year project will culminate in the delivery of at least five vehicles for field evaluation.

  9. Hybrid air foil bearing with external pressurization 

    E-Print Network [OSTI]

    Park, Soongook

    2009-05-15

    stream_source_info PARK-THESIS.pdf.txt stream_content_type text/plain stream_size 71559 Content-Encoding ISO-8859-1 stream_name PARK-THESIS.pdf.txt Content-Type text/plain; charset=ISO-8859-1 HYBRID AIR FOIL BEARING... nalytical ? x peak to peak and phase ang with difference bearing clearances; S f =0.2 and bump stiffness = 0.77 GN/m 3 0 30 60 90 120 150 180 6000 11000 16000 21000 26000 31000 Rotating speed (rpm) P h as e an gl e ( ) ? 11,150 rpm 14,171 rpm C...

  10. Hybrid electric vehicle power management system

    DOE Patents [OSTI]

    Bissontz, Jay E.

    2015-08-25

    Level voltage levels/states of charge are maintained among a plurality of high voltage DC electrical storage devices/traction battery packs that are arrayed in series to support operation of a hybrid electric vehicle drive train. Each high voltage DC electrical storage device supports a high voltage power bus, to which at least one controllable load is connected, and at least a first lower voltage level electrical distribution system. The rate of power transfer from the high voltage DC electrical storage devices to the at least first lower voltage electrical distribution system is controlled by DC-DC converters.

  11. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    K. Ueno and J. Lstiburek

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a “partial drainage” detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  12. Measure Guideline: Hybrid Foundation Insulation Retrofits

    SciTech Connect (OSTI)

    Ueno, K.; Lstiburek, J.

    2012-05-01

    This measure guideline provides recommendations for designs and variations for retrofit hybrid assemblies in improving interior foundation insulation and water management of basements. Variations include closed cell spray foam (ccSPF) with membrane waterproofing or air gap membrane drainage layers, rigid board foam insulation at flat walls (cast concrete or CMU block), a 'partial drainage' detail making use of the bulk water drainage that occurs through the field of a rubble stone wall, and non-drained spray foam assemblies (including slab insulation).

  13. Hybrid stretchable circuits on silicone substrate

    SciTech Connect (OSTI)

    Robinson, A., E-mail: adam.1.robinson@nokia.com; Aziz, A., E-mail: a.aziz1@lancaster.ac.uk [Nanoscience Centre, University of Cambridge, Cambridge CB01FF (United Kingdom); Liu, Q.; Suo, Z. [School of Engineering and Applied Sciences and Kavli Institute for Bionano Science and Technology, Harvard University, Cambridge, Massachusetts 02138 (United States); Lacour, S. P., E-mail: stephanie.lacour@epfl.ch [Centre for Neuroprosthetics and Laboratory for Soft Bioelectronics Interfaces, School of Engineering, Ecole Polytechnique Fédérale de Lausanne, Lausanne 1015 (Switzerland)

    2014-04-14

    When rigid and stretchable components are integrated onto a single elastic carrier substrate, large strain heterogeneities appear in the vicinity of the deformable-non-deformable interfaces. In this paper, we report on a generic approach to manufacture hybrid stretchable circuits where commercial electronic components can be mounted on a stretchable circuit board. Similar to printed circuit board development, the components are electrically bonded on the elastic substrate and interconnected with stretchable electrical traces. The substrate—a silicone matrix carrying concentric rigid disks—ensures both the circuit elasticity and the mechanical integrity of the most fragile materials.

  14. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, John M. (Albuquerque, NM)

    1992-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  15. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, J.M.

    1993-04-20

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  16. Hybrid sol-gel optical materials

    DOE Patents [OSTI]

    Zeigler, John M. (Albuquerque, NM)

    1993-01-01

    Hybrid sol-gel materials comprise silicate sols cross-linked with linear polysilane, polygermane, or poly(silane-germane). The sol-gel materials are useful as optical identifiers in tagging and verification applications and, in a different aspect, as stable, visible light transparent non-linear optical materials. Methyl or phenyl silicones, polyaryl sulfides, polyaryl ethers, and rubbery polysilanes may be used in addition to the linear polysilane. The linear polymers cross-link with the sol to form a matrix having high optical transparency, resistance to thermooxidative aging, adherence to a variety of substrates, brittleness, and a resistance to cracking during thermal cycling.

  17. Multicanonical hybrid Monte Carlo for compact QED

    E-Print Network [OSTI]

    G. Arnold; Th. Lippert; K. Schilling

    1999-09-14

    We demonstrate that substantial progress can be achieved in the study of the phase structure of 4-dimensional compact QED by a joint use of hybrid Monte Carlo and multicanonical algorithms, through an efficient parallel implementation. This is borne out by the observation of considerable speedup of tunnelling between the metastable states, close to the phase transition, on the Wilson line. Our approach leads to a general parallelization scheme for the efficient stochastic sampling of systems where (a part of) the Hamiltonian involves the total action or energy in each update step.

  18. Hydraulic Hybrid Systems | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources JumpNewTexas: EnergyHunterdonHutto,Fuel Cell Corporation JumpHybrid

  19. Highline Hydrogen Hybrids | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QAsource History View NewTexas: Energy Resources Jump to:Hershey,High-Temperature DownholeNewHydrogen Hybrids Jump

  20. NREL: Learning - Hybrid Electric Vehicle Basics

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration wouldMass map shines lightGeospatial Toolkit The Geospatial ToolkitElectricity ProductionHybrid

  1. Poulsen Hybrid, LLC | Open Energy Information

    Open Energy Info (EERE)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on QA:QA J-E-1 SECTION J APPENDIXsourceII JumpQuarterly SmartDB-2, BluePoulsen Hybrid, LLC Jump to: navigation, search

  2. hybrid vehicle systems | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power AdministrationRobust,Field-effectWorkingLosThe 26th AnnualHistory Over 100 Years5/04 |3 The Retrieval ofHybrid

  3. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantity ofkandz-cm11 Outreach Home Room NewsInformation CurrentHenry Bellamy, Ph.D.Food Drive HolidayHoursaUSHumanHuntingHybrid

  4. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of Find MoreHybrid

  5. Hybrid Rotaxanes: Interlocked Structures for Quantum Computing?

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Homesum_a_epg0_fpd_mmcf_m.xls" ,"Available from WebQuantityBonneville Power Administration would likeUniverse (JournalvivoHighHussein Khalil Hussein Khalil Director of FindHybrid

  6. Alternative Fuels Data Center: Hybrid Electric Vehicles

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    AFDC Printable Version Share this resource Send a link to EERE: Alternative Fuels Data Center Home Page to someone by E-mail Share EERE: Alternative Fuels Data Center Home Page on Facebook Tweet about EERE: Alternative Fuels Data Center Home Page on Twitter Bookmark EERE: Alternative Fuels Data Center Home Page on Google Bookmark EERE: Alternative Fuels Data Center Home Page on Delicious Rank EERE: Alternative Fuels Data Center Home Page on Digg FindPortsas aEthanolAFDC PrintableHybrid Electric

  7. High-Power Electrochemical Storage Devices and Plug-in Hybrid...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    High-Power Electrochemical Storage Devices and Plug-in Hybrid Electric Vehicle Battery Development High-Power Electrochemical Storage Devices and Plug-in Hybrid Electric Vehicle...

  8. Performance Characteristics of Lithium-ion Batteries of Various Chemistries for Plug-in Hybrid Vehicles

    E-Print Network [OSTI]

    Burke, Andrew; Miller, Marshall

    2009-01-01

    Characteristics of Lithium-ion Batteries of VariousAdvisor utilizing lithium-ion batteries of the differentin hybrids. Keywords: lithium-ion batteries, plug-in hybrid

  9. Hybrid and Plug-In Electric Vehicles (Brochure), Vehicle Technologies Program (VTP)

    Broader source: Energy.gov [DOE]

    Describes the basics of electric-drive vehicles, including hybrid electric vehicles, plug-in hybrid electric vehicles, all-electric vehicles, and the various charging options.

  10. Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    More Documents & Publications Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles Scalable, Low-Cost, High Performance IPM Motor for Hybrid Vehicles Vehicle...

  11. Electrochemical Capacitors as Energy Storage in Hybrid-Electric Vehicles: Present Status and Future Prospects

    E-Print Network [OSTI]

    Burke, Andy; Miller, Marshall

    2009-01-01

    batteries and ultracapacitors for electric vehicles. EVS24Battery, Hybrid and Fuel Cell Electric Vehicle Symposiumpublications on electric and hybrid vehicle technology and

  12. Fuel Cell Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Hybrid Bus Lands at Hickam AFB: Hydrogen Fuel Cell & Infrastructure Technologies Program, Fuel Cell Bus Demonstration Project (Fact Sheet) Fuel Cell Hybrid Bus Lands at Hickam AFB:...

  13. Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger Vehicle

    E-Print Network [OSTI]

    Li, Perry Y.

    Optimization and Control of a Hydro-Mechanical Transmission based Hybrid Hydraulic Passenger of Minnesota, Minneapolis, USA ABSTRACT Hydro-mechanical transmission (HMT) based hybrid hydraulic vehicle

  14. On the Capacity of Hybrid Wireless Networks Benyuan Liu

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    On the Capacity of Hybrid Wireless Networks Benyuan Liu , Zhen Liu + , Don Towsley Department 704 Yorktown Heights, NY 10598 Abstract-- We study the throughput capacity of hybrid wireless networks stations are assumed to be connected by a high-bandwidth wired network and act as relays for wireless nodes

  15. Proton corebeam system in the expanding solar wind: Hybrid simulations

    E-Print Network [OSTI]

    California at Berkeley, University of

    Proton corebeam system in the expanding solar wind: Hybrid simulations Petr Hellinger1,2 and Pavel 9 November 2011. [1] Results of a twodimensional hybrid expanding box simulation of a proton to a decrease of the ratio between the proton perpendicular and parallel temperatures as well as to an increase

  16. Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost

    E-Print Network [OSTI]

    Ulukus, Sennur

    Energy Harvesting Communications with Hybrid Energy Storage and Processing Cost Omur Ozel Khurram with an energy harvesting transmitter with non-negligible processing circuitry power and a hybrid energy storage for energy storage while the battery has unlimited space. The transmitter stores the harvested energy either

  17. Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang

    E-Print Network [OSTI]

    Huang, Jianwei

    Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang Network Communications: {haowang, jwhuang}@ie.cuhk.edu.hk Abstract--Both solar energy and wind energy are promising renewable the hybrid renewable energy investment in the microgrid. We jointly consider the investment and operation

  18. Energy Provisioning and Operating Costs in Hybrid Solar Powered Infrastructure

    E-Print Network [OSTI]

    Karakostas, George

    energy was designed in [5]. In these projects, the basestation use of solar and wind power is mainly]. In [3], the design of a basestation that is powered by solar and diesel energy is analyzed, and in [4] a hybrid solar-wind powered basestation is described. A hybrid system consisting of solar, wind and diesel

  19. SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT

    E-Print Network [OSTI]

    SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By XIAOWEI XU Bachelor #12;ii SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS Dissertation Approved Loop Heat Exchanger Model....................................................... 11 2.1.1.1 Modeling

  20. Comparison of Hybrid Systems and Fluid Stochastic Petri Nets \\Lambda

    E-Print Network [OSTI]

    Tuffin, Bruno

    Comparison of Hybrid Systems and Fluid Stochastic Petri Nets \\Lambda Bruno Tuffin , Dong S. Chen Engineering Duke University, Durham, NC 27708­0291, U.S.A. Abstract. Hybrid Systems are models of interacting digital and continuous devices with applications in the control of aircraft, computers, or modern cars

  1. Technical Report for "Hybrid Renewable Energy Investment in Microgrid"

    E-Print Network [OSTI]

    Huang, Jianwei

    1 Technical Report for "Hybrid Renewable Energy Investment in Microgrid" Hao Wang, Jianwei Huang of Hong Kong, and aim at studying the hybrid renewable energy investment in the microgrid. We jointly the microgrid operator's perspective. In the first period, the operator makes optimal investment decisions

  2. Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang

    E-Print Network [OSTI]

    Huang, Jianwei

    Hybrid Renewable Energy Investment in Microgrid Hao Wang, Jianwei Huang Network Communications the hybrid renewable energy investment in the microgrid. We jointly consider the investment and operation problem, and present a two-period stochastic programming model from the microgrid operator's perspective

  3. Exploring Genome Rearrangements using Virtual Hybridization Mahdi Belcaid1

    E-Print Network [OSTI]

    Chauve, Cedric

    Exploring Genome Rearrangements using Virtual Hybridization Mahdi Belcaid1 , Anne Bergeron1 , Annie genomes. Other techniques: Chromosome painting, hybridization with probes: long and onerous; Gene detection on well-annotated genomes: problems of orthologous gene identification; BLAST on raw sequences cut

  4. Hybrid Silicon Nanocone-Polymer Solar Cells Sangmoo Jeong,

    E-Print Network [OSTI]

    Fan, Shanhui

    ABSTRACT: Recently, hybrid Si/organic solar cells have been studied for low-cost Si photovoltaic devices solar cell. Additionally, about 26% of the module cost comes from the fabrication processes of a SiHybrid Silicon Nanocone-Polymer Solar Cells Sangmoo Jeong, Erik C. Garnett, Shuang Wang, Zongfu Yu

  5. Interchange Formats for Hybrid Systems: Review and Proposal

    E-Print Network [OSTI]

    Carloni, Luca

    and formal verification) and synthesis of hybrid systems, and we give a recommendation for an interchange to be powerful design representations for system- level design in particular for embedded controllers. The term: one would prefer to define a common model of computation for hybrid systems that should be used

  6. AT GUANTANAMO BAY: A HYBRID WIND-DIESEL SYSTEM

    E-Print Network [OSTI]

    Massachusetts at Amherst, University of

    WIND POWER AT GUANTANAMO BAY: A HYBRID WIND-DIESEL SYSTEM FOR THE US NAVY AT GUANTANAMO NAVAL BASE Laboratory and are actively developing what will be the world's largest wind-diesel hybrid electric plant. The pending installation of four 950-kW wind turbines to supplement the 22.8 MW diesel electricity plant

  7. Four$quare: Hybrid Spaces of Economic Activity

    E-Print Network [OSTI]

    Fekete, Emily

    2015-05-31

    , and especially those spaces created by location-based social media platforms, represent a hybrid space that meshes the physical information of the offline world with the digital information of the online. As a hybrid space, the internet has the power to shape...

  8. Performance Analysis of Manufacturing Systems Under Hybrid Control Policies

    E-Print Network [OSTI]

    Gershwin, Stanley B.

    is widely used in practice, and is seen as the \\state of the art" in lean manufacturing. We present severalPerformance Analysis of Manufacturing Systems Under Hybrid Control Policies by Asbjoern M. Bonvik of Manufacturing Systems Under Hybrid Control Policies by Asbjoern M. Bonvik Submitted to the Department

  9. SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT

    E-Print Network [OSTI]

    SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS By XIAOWEI XU Bachelor #12;ii SIMULATION AND OPTIMAL CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS Dissertation Approved of Vertical Ground Loop Heat Exchangers - Analytical....... 21 2.1.1.2 Modeling of Vertical Ground Loop Heat

  10. Hybrid Ground Source System Analysis and Tool Development

    Broader source: Energy.gov [DOE]

    Project objectives: 1. Compile filtered hourly data for three monitored hybrid installations. 2.Validate existing HyGCHP model. 3.Refine and enhance the HyGCHP model (usability / capability). 4. Demonstrate impact of actual hybrid installations. 5. Report lessons learned and impacts of HyGSHPs to design/engineering community.

  11. Quantifying Individual Potential Contributions of the Hybrid Sulfur Electrolyzer

    E-Print Network [OSTI]

    Weidner, John W.

    Quantifying Individual Potential Contributions of the Hybrid Sulfur Electrolyzer John A. Staser for the hybrid sulfur electrolyzer is controlled mainly by water transport in the cell. Water is required electrolyzer performance and operation. Experimental The experimental setup was the same as that described

  12. SIMULATING MARKET TRANSFORMATION DYNAMICS USING A HYBRID ENERGY ECONOMY MODEL

    E-Print Network [OSTI]

    ii SIMULATING MARKET TRANSFORMATION DYNAMICS USING A HYBRID ENERGY ECONOMY MODEL: A LOOK the likely effects of alternative policies, potential adoption rates of clean technologies, and costs to society in the long run. My goal was to use a "hybrid" energy economy model (CIMS), which combines

  13. An Island Based Hybrid Evolutionary Algorithm for Optimization

    E-Print Network [OSTI]

    Yang, Shengxiang

    evolutionary algorithm (IHEA) for op- timization, which is based on Particle swarm optimization (PSO), Fast for a simulation optimization problem. A hybrid evolutionary Particle Swarm Op- timization (PSO) method of being selected. A hybrid technique that com- bines GA and PSO, called genetic swarm optimization (GSO

  14. A Hybrid RNS Adaptive Filter for Channel Equalization

    E-Print Network [OSTI]

    A Hybrid RNS Adaptive Filter for Channel Equalization G.L. Bernocchi, G.C. Cardarilli, A. Del Re, A-- In this work a hybrid Residue Number System (RNS) implementation of an adaptive FIR filter is presented or echo cancellation). In the literature, it has been shown that the RNS implementation of FIR filters

  15. AN INTRODUCTION TO HYBRID SYSTEM MODELING, ANALYSIS, AND CONTROL

    E-Print Network [OSTI]

    Pappas, George J.

    AN INTRODUCTION TO HYBRID SYSTEM MODELING, ANALYSIS, AND CONTROL JOHN LYGEROS, GEORGE PAPPAS as models of large scale systems. We provide an overview of modeling, analysis, and controller synthesis automatically. Finally, we review a method for designing controllers for hybrid systems with reachability

  16. Evaluation of heterotic patterns in diverse sorghum hybrids 

    E-Print Network [OSTI]

    Nesbitt, Thomas Clint

    1994-01-01

    /ha and 4958.50 kg/ha, respectively, several hybrids attained yields over 10,000kg/ha. Stands at Corpus Christi and College Station were poor for many entries. Parents producing the highest yielding hybrids were A3Tx433, A,Tx632, A2Tx636, SC175-14.E and SC330...

  17. Implementation Plan for the Hybrid Ocean Modeling Environment

    E-Print Network [OSTI]

    in the atmosphere and cryosphere. The oceans operate in the climate system to transfer information (heat, saltImplementation Plan for the Hybrid Ocean Modeling Environment HOME R. Hallberg (NOAA/GFDL), A Recent advances in simulating the ocean through the use of generalized hybrid coordinate modeling

  18. Optimal Scheduling for Energy Harvesting Transmitters with Hybrid Energy Storage

    E-Print Network [OSTI]

    Ulukus, Sennur

    Optimal Scheduling for Energy Harvesting Transmitters with Hybrid Energy Storage Omur Ozel Khurram with an energy harvesting transmitter which has a hybrid energy storage unit composed of a perfectly efficient super-capacitor (SC) and an inefficient battery. The SC has finite space for energy storage while

  19. Jet Noise Shielding for Advanced Hybrid Wing-Body Configurations

    E-Print Network [OSTI]

    Papamoschou, Dimitri

    1 Jet Noise Shielding for Advanced Hybrid Wing-Body Configurations Dimitri Papamoschou noise shielding with an advanced design for the Hybrid Wing- Body airplane. The design, called N2AEXTE coordinates relative to plug tip X = axial distance between fan exit plane and shield trailing edge Subscripts

  20. Hydroxyapatite based hybrid dental materials with controlled porosity and improved

    E-Print Network [OSTI]

    North Texas, University of

    Dental obturation materials are perhaps the simplest biomaterials introduced into the human body becauseHydroxyapatite based hybrid dental materials with controlled porosity and improved tribological Lobland2 and J. R. Rodriguez1 Hybrid dental materials were designed with controlled porosity and improved

  1. Charge Allocation for Hybrid Electrical Energy Storage Systems

    E-Print Network [OSTI]

    Pedram, Massoud

    Charge Allocation for Hybrid Electrical Energy Storage Systems Qing Xie1, Yanzhi Wang1, Younghyun Hybrid electrical energy storage (HEES) systems, composed of multiple banks of heterogeneous electrical to efficiently store and retrieve electrical energy while attaining performance metrics that are close

  2. Networked Architecture for Hybrid Electrical Energy Storage Systems

    E-Print Network [OSTI]

    Pedram, Massoud

    Networked Architecture for Hybrid Electrical Energy Storage Systems Younghyun Kim, Sangyoung Park, pedram}@usc.edu ABSTRACT A hybrid electrical energy storage (HEES) system that consists of multiple, heterogeneous electrical energy storage (EES) elements is a promising solution to achieve a cost-effective EES

  3. Human Genome News: Workshop on sequencing by hybridization

    SciTech Connect (OSTI)

    Not Available

    1994-01-01

    A brief description of the Second International Workshop on Sequencing by Hybridization as held in Woodlands, Texas October 28--30, 1993 is provided in this report. Highlights of sessions entitled Chemistry and Analogs, Engineering and Automation, Hybridization Data and Theory and Informatics are given.

  4. Design & Engineering Services SPEAKMAN HYBRID ROOFTOP UNIT PERFORMANCE

    E-Print Network [OSTI]

    California at Davis, University of

    Design & Engineering Services SPEAKMAN HYBRID ROOFTOP UNIT PERFORMANCE: WESTERN COOLING CHALLENGE, and the National Renewable Energy Laboratory (NREL) conducted the physical laboratory tests at their facility for their contribution of the Air20 Quattro HCRS2500 hybrid rooftop unit used for evaluation, and is grateful to the US

  5. Design & Engineering Services AIRMAX HYBRID ROOFTOP UNIT PERFORMANCE: WESTERN

    E-Print Network [OSTI]

    California at Davis, University of

    Design & Engineering Services AIRMAX HYBRID ROOFTOP UNIT PERFORMANCE: WESTERN COOLING CHALLENGE. and the National Renewable Energy Laboratory (NREL) conducted the physical laboratory tests at their facility for their contribution of the Air20 Quattro HCRS2500 hybrid rooftop unit used for evaluation, and is grateful to the US

  6. The Hybridization of a Formula Race Car K. W. Benson

    E-Print Network [OSTI]

    competition rules were changed to disallow hybrids that use on-board energy storage [1]. Thus, the car builtThe Hybridization of a Formula Race Car K. W. Benson D. A. Fraser S. L. Hatridge C. A. Monaco R. J or republish this material for advertising or promotional purposes or for creating new collective works

  7. MASSIVE HYBRID PARALLELISM FOR FULLY IMPLICIT MULTIPHYSICS

    SciTech Connect (OSTI)

    Cody J. Permann; David Andrs; John W. Peterson; Derek R. Gaston

    2013-05-01

    As hardware advances continue to modify the supercomputing landscape, traditional scientific software development practices will become more outdated, ineffective, and inefficient. The process of rewriting/retooling existing software for new architectures is a Sisyphean task, and results in substantial hours of development time, effort, and money. Software libraries which provide an abstraction of the resources provided by such architectures are therefore essential if the computational engineering and science communities are to continue to flourish in this modern computing environment. The Multiphysics Object Oriented Simulation Environment (MOOSE) framework enables complex multiphysics analysis tools to be built rapidly by scientists, engineers, and domain specialists, while also allowing them to both take advantage of current HPC architectures, and efficiently prepare for future supercomputer designs. MOOSE employs a hybrid shared-memory and distributed-memory parallel model and provides a complete and consistent interface for creating multiphysics analysis tools. In this paper, a brief discussion of the mathematical algorithms underlying the framework and the internal object-oriented hybrid parallel design are given. Representative massively parallel results from several applications areas are presented, and a brief discussion of future areas of research for the framework are provided.

  8. Advanced hybrid vehicle propulsion system study

    SciTech Connect (OSTI)

    Schwarz, R.

    1982-05-01

    Results of a study of an advanced heat engine/electric automotive hybrid propulsion system are presented. The system uses a rotary stratified charge engine and an ac motor/controller in a parallel hybrid configuration. The three tasks of the study were (1) parametric studies involving five different vehicle types, (2) design trade-off studies to determine the influence of various vehicle and propulsion system parameters on system performance fuel economy and cost, and (3) a conceptual design establishing feasibility at the selected approach. Energy consumption for the selected system was .034 l/km (61.3 mpg) for the heat engine and .221 kWh/km (.356 kWh/mi) for the electric power system over a modified J227a schedule D driving cycle. Life cycle costs were 7.13 cents/km (11.5 cents/mi) at $2/gal gasoline and 7 cents/kWh electricity for 160,000 km (100,000 mi) life.

  9. Primordial anisotropies in gauged hybrid inflation

    SciTech Connect (OSTI)

    Abolhasani, Ali Akbar; Emami, Razieh; Firouzjahi, Hassan E-mail: emami@ipm.ir

    2014-05-01

    We study primordial anisotropies generated in the model of gauged hybrid inflation in which the complex waterfall field is charged under a U(1)gauge field. Primordial anisotropies are generated either actively during inflation or from inhomogeneities modulating the surface of end of inflation during waterfall transition. We present a consistent ?N mechanism to calculate the anisotropic power spectrum and bispectrum. We show that the primordial anisotropies generated at the surface of end of inflation do not depend on the number of e-folds and therefore do not produce dangerously large anisotropies associated with the IR modes. Furthermore, one can find the parameter space that the anisotropies generated from the surface of end of inflation cancel the anisotropies generated during inflation, therefore relaxing the constrains on model parameters imposed from IR anisotropies. We also show that the gauge field fluctuations induce a red-tilted power spectrum so the averaged power spectrum from the gauge field can change the total power spectrum from blue to red. Therefore, hybrid inflation, once gauged under a U(1) field, can be consistent with the cosmological observations.

  10. Hybrid phosphazene anodes for energy storage applications

    SciTech Connect (OSTI)

    Eric J. Dufek; Mark L. Stone; Kevin L. Gering; Frederick F. Stewart; David Jamison; Aaron D. Wilson; Lucia M. Petkovic; Mason K. Harrup; Harry W. Rollins

    2014-12-01

    The use of hybrid cyclic phosphazene polymer/graphite anodes, where the phosphazene serves as distributed loci for Li deposition, has been investigated. Capacity within the hybrid system was found to occur reversibly in distinct regions. At the most positive voltages, above 0.06 V vs Li/Li+, the capacity was associated mostly with Li+ intercalation into graphite. In the most negative region, deposition of Li within the polymer was the predominate mechanism. A transitional region is inferred by the data whereby bulk aggregation or clustering of Li atoms occurs in proximity to the phosphazene sites that then serve as a template for more widespread population of Li within the anode at higher voltages, akin to a nucleation process. In full cells with a mixed oxide cathode, controlling the extent of Li deposition by limiting the charging voltage to 4.45 V enabled repeated cycling with no loss in capacity. Capacities as high as 183 mAh g-1 have been achieved for systems containing as little as 10% graphite while retaining coulombic efficiencies of 98% over 50 cycles. This level of cycling equates to the deposition of 7.4 Li per cyclic phosphazene.

  11. Hybrid Combustion-Gasification Chemical Looping

    SciTech Connect (OSTI)

    Herbert Andrus; Gregory Burns; John Chiu; Gregory Lijedahl; Peter Stromberg; Paul Thibeault

    2009-01-07

    For the past several years Alstom Power Inc. (Alstom), a leading world-wide power system manufacturer and supplier, has been in the initial stages of developing an entirely new, ultra-clean, low cost, high efficiency power plant for the global power market. This new power plant concept is based on a hybrid combustion-gasification process utilizing high temperature chemical and thermal looping technology The process consists of the oxidation, reduction, carbonation, and calcination of calcium-based compounds, which chemically react with coal, biomass, or opportunity fuels in two chemical loops and one thermal loop. The chemical and thermal looping technology can be alternatively configured as (i) a combustion-based steam power plant with CO{sub 2} capture, (ii) a hybrid combustion-gasification process producing a syngas for gas turbines or fuel cells, or (iii) an integrated hybrid combustion-gasification process producing hydrogen for gas turbines, fuel cells or other hydrogen based applications while also producing a separate stream of CO{sub 2} for use or sequestration. In its most advanced configuration, this new concept offers the promise to become the technology link from today's Rankine cycle steam power plants to tomorrow's advanced energy plants. The objective of this work is to develop and verify the high temperature chemical and thermal looping process concept at a small-scale pilot facility in order to enable AL to design, construct and demonstrate a pre-commercial, prototype version of this advanced system. In support of this objective, Alstom and DOE started a multi-year program, under this contract. Before the contract started, in a preliminary phase (Phase 0) Alstom funded and built the required small-scale pilot facility (Process Development Unit, PDU) at its Power Plant Laboratories in Windsor, Connecticut. Construction was completed in calendar year 2003. The objective for Phase I was to develop the indirect combustion loop with CO{sub 2} separation, and also syngas production from coal with the calcium sulfide (CaS)/calcium sulfate (CaSO{sub 4}) loop utilizing the PDU facility. The results of Phase I were reported in Reference 1, 'Hybrid Combustion-Gasification Chemical Looping Coal Power Development Technology Development Phase I Report' The objective for Phase II was to develop the carbonate loop--lime (CaO)/calcium carbonate (CaCO{sub 3}) loop, integrate it with the gasification loop from Phase I, and ultimately demonstrate the feasibility of hydrogen production from the combined loops. The results of this program were reported in Reference 3, 'Hybrid Combustion-Gasification Chemical Looping Coal Power Development Technology Development Phase II Report'. The objective of Phase III is to operate the pilot plant to obtain enough engineering information to design a prototype of the commercial Chemical Looping concept. The activities include modifications to the Phase II Chemical Looping PDU, solids transportation studies, control and instrumentation studies and additional cold flow modeling. The deliverable is a report making recommendations for preliminary design guidelines for the prototype plant, results from the pilot plant testing and an update of the commercial plant economic estimates.

  12. Structural Analysis of LargeStructural Analysis of Large Caliber Hybrid Ceramic/SteelCaliber Hybrid Ceramic/Steel

    E-Print Network [OSTI]

    Grujicic, Mica

    Structural Analysis of LargeStructural Analysis of Large Caliber Hybrid Ceramic/SteelCaliber Hybrid Ceramic/Steel Gun BarrelsGun Barrels MS ThesisMS Thesis Jon DeLongJon DeLong Department of Mechanical ·Merger of ceramics into the conventional steel gun barrel design ·Use of a probabilistic structural

  13. Development of Integrated Motor Assist Hybrid System: Development of the 'Insight', a Personal Hybrid Coupe

    SciTech Connect (OSTI)

    Kaoru Aoki; Shigetaka Kuroda; Shigemasa Kajiwara; Hiromitsu Sato; Yoshio Yamamoto

    2000-06-19

    This paper presents the technical approach used to design and develop the powerplant for the Honda Insight, a new motor assist hybrid vehicle with an overall development objective of just half the fuel consumption of the current Civic over a wide range of driving conditions. Fuel consumption of 35km/L (Japanese 10-15 mode), and 3.4L/100km (98/69/EC) was realized. To achieve this, a new Integrated Motor Assist (IMA) hybrid power plant system was developed, incorporating many new technologies for packaging and integrating the motor assist system and for improving engine thermal efficiency. This was developed in combination with a new lightweight aluminum body with low aerodynamic resistance. Environmental performance goals also included the simultaneous achievement of low emissions (half the Japanese year 2000 standards, and half the EU2000 standards), high efficiency, and recyclability. Full consideration was also given to key consumer attributes, including crash safety performance, handling, and driving performance.

  14. Battery control system for hybrid vehicle and method for controlling a hybrid vehicle battery

    DOE Patents [OSTI]

    Bockelmann, Thomas R. (Battle Creek, MI); Beaty, Kevin D. (Kalamazoo, MI); Zou, Zhanijang (Battle Creek, MI); Kang, Xiaosong (Battle Creek, MI)

    2009-07-21

    A battery control system for controlling a state of charge of a hybrid vehicle battery includes a detecting arrangement for determining a vehicle operating state or an intended vehicle operating state and a controller for setting a target state of charge level of the battery based on the vehicle operating state or the intended vehicle operating state. The controller is operable to set a target state of charge level at a first level during a mobile vehicle operating state and at a second level during a stationary vehicle operating state or in anticipation of the vehicle operating in the stationary vehicle operating state. The invention further includes a method for controlling a state of charge of a hybrid vehicle battery.

  15. Organic hybrid planar-nanocrystalline bulk heterojunctions

    DOE Patents [OSTI]

    Forrest, Stephen R.; Yang, Fan

    2013-04-09

    A photosensitive optoelectronic device having an improved hybrid planar bulk heterojunction includes a plurality of photoconductive materials disposed between the anode and the cathode. The photoconductive materials include a first continuous layer of donor material and a second continuous layer of acceptor material. A first network of donor material or materials extends from the first continuous layer toward the second continuous layer, providing continuous pathways for conduction of holes to the first continuous layer. A second network of acceptor material or materials extends from the second continuous layer toward the first continuous layer, providing continuous pathways for conduction of electrons to the second continuous layer. The first network and the second network are interlaced with each other. At least one other photoconductive material is interspersed between the interlaced networks. This other photoconductive material or materials has an absorption spectra different from the donor and acceptor materials.

  16. Organic hybrid planar-nanocrystalline bulk heterojunctions

    DOE Patents [OSTI]

    Forrest, Stephen R. (Ann Arbor, MI); Yang, Fan (Piscataway, NJ)

    2011-03-01

    A photosensitive optoelectronic device having an improved hybrid planar bulk heterojunction includes a plurality of photoconductive materials disposed between the anode and the cathode. The photoconductive materials include a first continuous layer of donor material and a second continuous layer of acceptor material. A first network of donor material or materials extends from the first continuous layer toward the second continuous layer, providing continuous pathways for conduction of holes to the first continuous layer. A second network of acceptor material or materials extends from the second continuous layer toward the first continuous layer, providing continuous pathways for conduction of electrons to the second continuous layer. The first network and the second network are interlaced with each other. At least one other photoconductive material is interspersed between the interlaced networks. This other photoconductive material or materials has an absorption spectra different from the donor and acceptor materials.

  17. Brake blending strategy for a hybrid vehicle

    DOE Patents [OSTI]

    Boberg, Evan S. (Hazel Park, MI)

    2000-12-05

    A hybrid electric powertrain system is provided including a transmission for driving a pair of wheels of a vehicle and a heat engine and an electric motor/generator coupled to the transmission. A friction brake system is provided for applying a braking torque to said vehicle. A controller unit generates control signals to the electric motor/generator and the friction brake system for controllably braking the vehicle in response to a drivers brake command. The controller unit determines and amount of regenerative torque available and compares this value to a determined amount of brake torque requested for determining the control signals to the electric motor/generator and the friction brake system.

  18. Hybrid black-hole binary initial data

    E-Print Network [OSTI]

    Bruno C. Mundim; Bernard J. Kelly; Yosef Zlochower; Hiroyuki Nakano; Manuela Campanelli

    2010-12-04

    Traditional black-hole binary puncture initial data is conformally flat. This unphysical assumption is coupled with a lack of radiation signature from the binary's past life. As a result, waveforms extracted from evolutions of this data display an abrupt jump. In Kelly et al. [Class.Quant.Grav.27:114005,2010], a new binary black-hole initial data with radiation contents derived in the post-Newtonian (PN) calculation was adapted to puncture evolutions in numerical relativity. This data satisfies the constraint equations to the 2.5PN order, and contains a transverse-traceless "wavy" metric contribution, violating the standard assumption of conformal flatness. Although the evolution contained less spurious radiation, there were undesired features; the unphysical horizon mass loss and the large initial orbital eccentricity. Introducing a hybrid approach to the initial data evaluation, we significantly reduce these undesired features.

  19. Nuclear Hybrid Energy Systems: Challenges and Opportunities

    SciTech Connect (OSTI)

    P. Sabharwall; S.B. Sitton; S.J. Yoon; C. Stoots

    2014-07-01

    With growing demand of energy and costs of the fossil fuels, coupled with the environmental concerns have resulted in an increased interest in alternative energy sources. Nuclear hybrid energy systems (NHES) are being considered which incorporates renewable energy sources such as solar and wind energy combined with nuclear reactor and energy storage to meet the peak hours demand imposed on the grid, along with providing process heat for other potential industrial applications. This concept could potentially satisfy various energy demands and improve reliability, robustness and resilience for the entire system as a whole, along with economic and net efficiency gains. This paper provides a brief understanding of potential NHES system and architecture along with the challenges

  20. METALLIC AND HYBRID NANOSTRUCTURES: FUNDAMENTALS AND APPLICATIONS

    SciTech Connect (OSTI)

    Murph, S.

    2012-05-02

    This book chapter presents an overview of research conducted in our laboratory on preparation, optical and physico-chemical properties of metallic and nanohybrid materials. Metallic nanoparticles, particularly gold, silver, platinum or a combination of those are the main focus of this review manuscript. These metallic nanoparticles were further functionalized and used as templates for creation of complex and ordered nanomaterials with tailored and tunable structural, optical, catalytic and surface properties. Controlling the surface chemistry on/off metallic nanoparticles allows production of advanced nanoarchitectures. This includes coupled or encapsulated core-shell geometries, nano-peapods, solid or hollow, monometallic/bimetallic, hybrid nanoparticles. Rational assemblies of these nanostructures into one-, two- and tridimensional nano-architectures is described and analyzed. Their sensing, environmental and energy related applications are reviewed.