Powered by Deep Web Technologies
Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


1

Analysis Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Genome Channel Generation GRAIL GRAILEXP Pipeline Domain Parser Prospect MIRA Analysis Tools We are the Computational Biology and Bioinformatics Group of the Biosciences Division...

2

Analysis & Tools: Tools and Tool Interaction AAU  

E-Print Network (OSTI)

During the three years of AMETIST the performance and usability of the existing tools for analysing timed automata models have improved enormously. In addition to traditional verification of timed models, emphasis has been put into retargeting the technology towards optimal scheduling and performance analysis and have been pursued in a number of new tools developed

unknown authors

2005-01-01T23:59:59.000Z

3

Topics and Techniques in Forensic DNA Analysis  

Science Conference Proceedings (OSTI)

... Topics and Techniques for Forensic DNA Analysis NYC OCME Dept of Forensic Biology ... NIST Human Identity Project Leader (1999-present) ...

2012-04-17T23:59:59.000Z

4

Environment/Health/Safety/Security (EHSS): Tool Box Safety Topics  

NLE Websites -- All DOE Office Websites (Extended Search)

Tool Box Safety Topics Tool Box Safety Topics A Review of Haz com standards A Single Second Accident Prevention Acetone Use and Care Aerial Work Platforms Afterthoughts and Regrets Alcohol & the Job Allergies, Antihistamines Appreciating the Hazards, Oxyacetylene Attitude and Behavior Avoid Common Office Injuries Avoiding Electrical Shocks Back Care Back Injury Prevention Backing into Trouble Basic Machine Safety Battery Charging Hazards Be Cautious with Sulfuric Acid Be Prepared for Emergencies Bench & Pedestal Grinders Blood Borne Pathogens Carbon Monoxide Care for Half-Mask Respirators Carelessness Cargo Dock Safety CDT's-How you prevent them Chocking and Blocking Cold Medication.Drowsiness Cold Weather Hazards for Propane Powered Vehicles Come-a-Longs, Hoists & Chains Common Sense & Accidents

5

Arabic texts analysis for topic modeling evaluation  

Science Conference Proceedings (OSTI)

Significant progress has been made in information retrieval covering text semantic indexing and multilingual analysis. However, developments in Arabic information retrieval did not follow the extraordinary growth of Arabic usage in the Web during the ... Keywords: Arabic stemming, Classification, Linguistic analysis, Test collections, Topic model

Abderrezak Brahmi; Ahmed Ech-Cherif; Abdelkader Benyettou

2012-02-01T23:59:59.000Z

6

Harmonized Emissions Analysis Tool (HEAT) | Open Energy Information  

Open Energy Info (EERE)

Harmonized Emissions Analysis Tool (HEAT) Harmonized Emissions Analysis Tool (HEAT) Jump to: navigation, search Tool Summary Name: Harmonized Emissions Analysis Tool (HEAT) Agency/Company /Organization: Local Governments for Sustainability Sector: Energy, Land Topics: Co-benefits assessment, - Health, GHG inventory, Implementation, Pathways analysis Resource Type: Software/modeling tools User Interface: Website Complexity/Ease of Use: Moderate Website: www.environmenttools.co.uk/directory/tool/name/harmonized-emissions-an Cost: Free Harmonized Emissions Analysis Tool (HEAT) Screenshot References: ICLEI-HEAT[1] Related Tools Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) Prospective Outlook on Long-Term Energy Systems (POLES) ICCT Roadmap Model ... further results Find Another Tool

7

Climate Analysis Indicators Tool (CAIT) | Open Energy Information  

Open Energy Info (EERE)

Climate Analysis Indicators Tool (CAIT) Climate Analysis Indicators Tool (CAIT) (Redirected from Climate Analysis Indicators Tool) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI Climate Analysis Indicators Tool Agency/Company /Organization: World Resources Institute Sector: Climate, Energy, Land Topics: GHG inventory Resource Type: Dataset, Software/modeling tools User Interface: Website Website: cait.wri.org/ Language: English WRI Climate Analysis Indicators Tool Screenshot References: Climate Analysis Indicators Tool[1] CAIT is the Climate Analysis Indicators Tool -- an information and analysis tool on global climate change. It provides a comprehensive and comparable database of greenhouse gas emissions data (including all major sources and sinks) and other climate-relevant indicators. CAIT can be used to analyze a

8

Carbon Value Analysis Tool (CVAT) | Open Energy Information  

Open Energy Info (EERE)

Carbon Value Analysis Tool (CVAT) Carbon Value Analysis Tool (CVAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Carbon Value Analysis Tool (CVAT) Agency/Company /Organization: World Resources Institute Sector: Energy, Land Topics: Co-benefits assessment, Finance, GHG inventory Resource Type: Software/modeling tools User Interface: Spreadsheet Website: www.wri.org/publication/carbon-value-analysis-tool Cost: Free Carbon Value Analysis Tool (CVAT) Screenshot References: CVAT[1] he Carbon Value Analysis Tool (CVAT) is a screening tool to help companies integrate the value of carbon dioxide emissions reductions into energy-related investment decisions. The tool has two main purposes: To test the sensitivity of a project's internal rate of return (IRR) to "carbon value" (the value of GHG emissions reductions). CVAT integrates this value into traditional financial analysis by ascribing a market price, either actual or projected, to carbon emissions reductions.

9

OpenStudio Policy Analysis Tool | Open Energy Information  

Open Energy Info (EERE)

OpenStudio Policy Analysis Tool OpenStudio Policy Analysis Tool Jump to: navigation, search Tool Summary Name: OpenStudio Policy Analysis Tool Agency/Company /Organization: National Renewable Energy Laboratory Sector: Climate Focus Area: Geothermal Phase: Evaluate Options Topics: Policies/deployment programs Resource Type: Software/modeling tools User Interface: Website Website: openstudio.nrel.gov/openstudio-getting-started/policy-analysis-tool/ OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Policy Analysis Tool[1] Perform simple modeling and analysis by visually comparing sets of perturbation results and evaluating them against collections of standards rules. The Policy Analysis Tool is a data manipulation and data visualization tool

10

RETScreen International Clean Energy Project Analysis Tool | Open Energy  

Open Energy Info (EERE)

RETScreen International Clean Energy Project Analysis Tool RETScreen International Clean Energy Project Analysis Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: RETScreen International Clean Energy Project Analysis Tool Focus Area: Renewable Energy Topics: Opportunity Assessment & Screening Website: www.retscreen.net/ang/home.php Equivalent URI: cleanenergysolutions.org/content/retscreen-international-clean-energy- Language: String representation "English,Arabic, ... Urdu,Vietnamese" is too long. Policies: Deployment Programs DeploymentPrograms: Training & Education The RETScreen International Clean Energy Project Analysis Software is a unique decision-support tool. The software, provided free-of-charge, can be used worldwide to evaluate the energy production and savings, costs,

11

Climate Analysis Indicators Tool (CAIT) | Open Energy Information  

Open Energy Info (EERE)

Climate Analysis Indicators Tool (CAIT) Climate Analysis Indicators Tool (CAIT) Jump to: navigation, search Tool Summary Name: WRI Climate Analysis Indicators Tool Agency/Company /Organization: World Resources Institute Sector: Climate, Energy, Land Topics: GHG inventory Resource Type: Dataset, Software/modeling tools User Interface: Website Website: cait.wri.org/ Language: English WRI Climate Analysis Indicators Tool Screenshot References: Climate Analysis Indicators Tool[1] CAIT is the Climate Analysis Indicators Tool -- an information and analysis tool on global climate change. It provides a comprehensive and comparable database of greenhouse gas emissions data (including all major sources and sinks) and other climate-relevant indicators. CAIT can be used to analyze a wide range of climate-related data questions and to help support future

12

Climate Analysis Indicators Tool (CAIT) | Open Energy Information  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Climate Analysis Indicators Tool (CAIT) (Redirected from WRI Climate Analysis Indicators Tool) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: WRI Climate Analysis Indicators Tool Agency/Company /Organization: World Resources Institute Sector: Climate, Energy, Land Topics: GHG inventory Resource Type: Dataset, Software/modeling tools User Interface: Website Website: cait.wri.org/ Language: English WRI Climate Analysis Indicators Tool Screenshot References: Climate Analysis Indicators Tool[1] CAIT is the Climate Analysis Indicators Tool -- an information and analysis

13

2010 Solar Market Transformation Analysis and Tools | Open Energy  

Open Energy Info (EERE)

2010 Solar Market Transformation Analysis and Tools 2010 Solar Market Transformation Analysis and Tools Jump to: navigation, search Tool Summary Name: 2010 Solar Market Transformation Analysis and Tools Agency/Company /Organization: U.S. Department of Energy Sector: Energy Focus Area: Renewable Energy, Solar Topics: Market analysis, Pathways analysis, Technology characterizations Resource Type: Publications, Guide/manual Website: www1.eere.energy.gov/solar/pdfs/2010_mt_overview.pdf 2010 Solar Market Transformation Analysis and Tools Screenshot References: 2010 Solar Market Transformation Analysis and Tools[1] This document describes the DOE-funded solar market transformation analysis and tools under developm This document describes the DOE-funded solar market transformation analysis and tools under development in FY10 so that stakeholders can access

14

Latent Community Topic Analysis: Integration of Community Discovery with Topic Modeling  

Science Conference Proceedings (OSTI)

This article studies the problem of latent community topic analysis in text-associated graphs. With the development of social media, a lot of user-generated content is available with user networks. Along with rich information in networks, user graphs ... Keywords: Topic modeling, community discovery

Zhijun Yin; Liangliang Cao; Quanquan Gu; Jiawei Han

2012-09-01T23:59:59.000Z

15

Distributed Wind Site Analysis Tool (DSAT) | Open Energy Information  

Open Energy Info (EERE)

Distributed Wind Site Analysis Tool (DSAT) Distributed Wind Site Analysis Tool (DSAT) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Distributed Wind Site Analysis Tool (DSAT) Focus Area: Renewable Energy Topics: Opportunity Assessment & Screening Website: dsat.cadmusgroup.com/Default.aspx Equivalent URI: cleanenergysolutions.org/content/distributed-wind-site-analysis-tool-d Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance The Distributed Wind Site Analysis Tool (DSAT) is a powerful online tool for conducting detailed site assessments for single turbine projects, from residential to community scale. The tool offers users the ability to analyse potential wind turbine installment projects based on the type of turbine being installed, the terrain of the installment site, and the

16

Tools & Techniques for Failure Analysis  

Science Conference Proceedings (OSTI)

Oct 31, 2013 ... Failure Analysis and Prevention: Tools & Techniques for Failure ... As lithium-ion battery technology continues to advance and is adopted in diverse markets, ... fracture origin and an understanding of the fracture event energy.

17

DEVELOPING NEW TOOLS FOR POLICY ANALYSIS  

Science Conference Proceedings (OSTI)

For the past three years, the Office of Security Policy has been aggressively pursuing substantial improvements in the U. S. Department of Energy (DOE) regulations and directives related to safeguards and security (S&S). An initial effort focused on areas where specific improvements could be made. This revision was completed during 2009 with the publication of a number of revised manuals. Developing these revisions involved more than 100 experts in the various disciplines involved, yet the changes made were only those that could be identified and agreed upon based largely on expert opinion. The next phase of changes will be more analytically based. A thorough review of the entire (S&S) directives set will be conducted using software tools to analyze the present directives with a view toward 1) identifying areas of positive synergism among topical areas, 2) identifying areas of unnecessary duplication within and among topical areas, and 3) identifying requirements that are less than effective in achieving the intended protection goals. This paper will describe the software tools available and in development that will be used in this effort. Some examples of the output of the tools will be included, as will a short discussion of the follow-on analysis that will be performed when these outputs are available to policy analysts.

Donovan, Richard L.; Schwartz, Michael J.; Selby, Kevin B.; Uecker, Norma J.

2010-08-11T23:59:59.000Z

18

VCAT: Visual Crosswalk Analysis Tool  

SciTech Connect

VCAT is a knowledge modeling and analysis tool. It was synthesized from ideas in functional analysis, business process modeling, and complex network science. VCAT discovers synergies by analyzing natural language descriptions. Specifically, it creates visual analytic perspectives that capture intended organization structures, then overlays the serendipitous relationships that point to potential synergies within an organization or across multiple organizations.

Cleland, Timothy J. [Los Alamos National Laboratory; Forslund, David W. [Los Alamos National Laboratory; Cleland, Catherine A. [Los Alamos National Laboratory

2012-08-31T23:59:59.000Z

19

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technology Marketing Summaries Here you’ll find marketing summaries of energy analysis models, tools, and software ...

20

NREL: Energy Analysis - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Most of these tools can be applied on a global, regional, local, or project basis. Energy Data for Decision Makers Crosscutting Analysis Models and Tools Technology Analysis Models...

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


21

Graphical Contingency Analysis Tool - Energy Innovation Portal  

Technology Marketing Summary The Graphical Contingency Analysis (GCA) Tool is a visual analytic software tool that aids power grid operators and ...

22

Shot Planning and Analysis Tools  

SciTech Connect

Shot planning and analysis tools (SPLAT) integrate components necessary to help achieve a high over-all operational efficiency of the National Ignition Facility (NIF) by combining near and long-term shot planning, final optics demand and supply loops, target diagnostics planning, and target fabrication requirements. Currently, the SPLAT project is comprised of two primary tool suites for shot planning and optics demand. The shot planning component provides a web-based interface to selecting and building a sequence of proposed shots for the NIF. These shot sequences, or 'lanes' as they are referred to by shot planners, provide for planning both near-term shots in the Facility and long-term 'campaigns' in the months and years to come. The shot planning capabilities integrate with the Configuration Management Tool (CMT) for experiment details and the NIF calendar for availability. Future enhancements will additionally integrate with target diagnostics planning and target fabrication requirements tools. The optics demand component is built upon predictive modelling of maintenance requirements on the final optics as a result of the proposed shots assembled during shot planning. The predictive models integrate energetics from a Laser Performance Operations Model (LPOM), the status of the deployed optics as provided by the online Final Optics Inspection system, and physics-based mathematical 'rules' that predict optic flaw growth and new flaw initiations. These models are then run on an analytical cluster comprised of forty-eight Linux-based compute nodes. Results from the predictive models are used to produce decision-support reports in the areas of optics inspection planning, optics maintenance exchanges, and optics beam blocker placement advisories. Over time, the SPLAT project will evolve to provide a variety of decision-support and operation optimization tools.

Casey, A; Beeler, R; Conder, A; Fallejo, R; Flegel, M; Hutton, M; Jancaitis, K; Lakamsani, V; Potter, D; Reisdorf, S; Tappero, J; Whitman, P; Carr, W; Liao, Z

2011-07-25T23:59:59.000Z

23

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technologies Available for Licensing U.S. Department of Energy laboratories and participating research ...

24

Design and analysis tool validation  

DOE Green Energy (OSTI)

The Solar Energy Research Institute (SERI) is developing a procedure for the validation of Building Energy Analysis Simulation Codes (BEAS). These codes are being used increasingly in the building design process, both directly and as the basis for simplified design tools and guidelines. The importance of the validity of the BEAS in predicting building energy performance is obvious when one considers the money and energy that could be wasted by energy-inefficient designs. However, to date, little or no systematic effort has been made to ensure the validity of the various BEAS. The validation work at SERI consists of three distinct parts: Comparative Study, Analytical Verification, and Empirical Validation. The procedures have been developed for the first two parts and have been implemented on a sampling of the major BEAS; results have shown major problems in one of the BEAS tested. Furthermore, when one building design was run using several of the BEAS, large differences were found in the predicted annual cooling and heating loads. The empirical validation procedure has been developed, and five two-zone test cells have been constructed for validation; a summer validation run will take place as soon as the data acquisition system is completed. Additionally, a test validation exercise is now in progress using the low-cal house to fine-tune the empirical validation procedure and better define monitoring data requirements.

Judkoff, R.

1981-07-01T23:59:59.000Z

25

Topic Area 2: Data Gathering and Analysis | Open Energy Information  

Open Energy Info (EERE)

2: Data Gathering and Analysis 2: Data Gathering and Analysis Jump to: navigation, search Geothermal ARRA Funded Projects for Topic Area 2: Data Gathering and Analysis Loading map... {"format":"googlemaps3","type":"ROADMAP","types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"limit":200,"offset":0,"link":"all","sort":[""],"order":[],"headers":"show","mainlabel":"","intro":"","outro":"","searchlabel":"\u2026 further results","default":"","geoservice":"google","zoom":false,"width":"600px","height":"350px","centre":false,"layers":[],"controls":["pan","zoom","type","scale","streetview"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"kml":[],"gkml":[],"fusiontables":[],"resizable":false,"tilt":0,"kmlrezoom":false,"poi":true,"imageoverlays":[],"markercluster":false,"searchmarkers":"","icon":"","visitedicon":"","forceshow":true,"showtitle":true,"hidenamespace":false,"template":false,"title":"","label":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"locations":[{"text":"

26

Energy Analysis Models, Tools and Software Technologies ...  

Energy Analysis Models, Tools and Software Technologies Available for Licensing U.S. Department of Energy laboratories and participating research institutions have ...

27

Building Energy Software Tools Directory : Tariff Analysis Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Tariff Analysis Project Back to Tool Screenshot for Tariff Analysis Project. Screenshot for Tariff Analysis Project...

28

Human Factors Engineering Analysis Tool  

A new software tool enables the easy and quick selection of applicable regulatory guidelines as a starting point for human factors engineering (HFE) analyses.  Once selected, each guideline can be viewed on screen.  The software tracks and reports the ...

29

Additional EIPC Study Analysis: Interim Report on High Priority Topics  

SciTech Connect

Between 2010 and 2012 the Eastern Interconnection Planning Collaborative (EIPC) conducted a major long-term resource and transmission study of the Eastern Interconnection (EI). With guidance from a Stakeholder Steering Committee (SSC) that included representatives from the Eastern Interconnection States Planning Council (EISPC) among others, the project was conducted in two phases. Phase 1 involved a long-term capacity expansion analysis that involved creation of eight major futures plus 72 sensitivities. Three scenarios were selected for more extensive transmission- focused evaluation in Phase 2. Five power flow analyses, nine production cost model runs (including six sensitivities), and three capital cost estimations were developed during this second phase. The results from Phase 1 and 2 provided a wealth of data that could be examined further to address energy-related questions. A list of 13 topics was developed for further analysis; this paper discusses the first five.

Hadley, Stanton W [ORNL] [ORNL

2013-11-01T23:59:59.000Z

30

NREL: Energy Analysis - Market Analysis Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Analysis Search More Search Options Site Map Printable Version Market Analysis Models and Tools The following is a list of models and tools that are used for market...

31

Analysis of collaborative writing processes using revision maps and probabilistic topic models  

Science Conference Proceedings (OSTI)

The use of cloud computing writing tools, such as Google Docs, by students to write collaboratively provides unprecedented data about the progress of writing. This data can be exploited to gain insights on how learners' collaborative activities, ideas ... Keywords: author-topic models, collaborative writing processes, probabilistic topic, visualisation

Vilaythong Southavilay; Kalina Yacef; Peter Reimann; Rafael A. Calvo

2013-04-01T23:59:59.000Z

32

Combining statistical data analysis techniques to extract topical keyword classes from corpora  

Science Conference Proceedings (OSTI)

We present an unsupervised method for the generation from a textual corpus of sets of keywords, that is, words whose occurrences in a text are strongly connected with the presence of a given topic. Each of these classes is associated with one of the ... Keywords: Statistical Data Analysis, Topic Characterization, Topic Detection, Unsupervised Classification

Mathias Rossignol; Pascale Sébillot

2005-01-01T23:59:59.000Z

33

SWERA/Analysis Tools | Open Energy Information  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » SWERA/Analysis Tools < SWERA Jump to: navigation, search SWERA logo.png Solar and Wind Energy Resource Assessment (SWERA) Analysis ToolsPowered by OpenEI Getting Started Data Sets Analysis Tools About SWERA OpenCarto OpenCarto houses the SWERA web based GIS application and provides the tools and data to support a variety of user communities in both small and large project planning, feasibility assessment, policy making, and decision support. The interface is designed to support collaboration across industries, geography, and research domains by providing interoperability

34

NREL: Energy Analysis - Models and Tools Archive  

NLE Websites -- All DOE Office Websites (Extended Search)

Models and Tools Archive Models and Tools Archive Through the years, NREL has developed and supported several models and tools to assess, analyze, and optimize renewable energy and energy efficiency technologies. Some of these have been transferred to the private market. This page lists tools we have supported, but that are no longer active. See current models and tools here. ADVISOR (ADvanced VehIcle SimulatOR) Simulate and analyze conventional, advanced, light, and heavy vehicles, including hybrid electric and fuel cell vehicles. In 2003, ADVISOR was commercialized by AVL Powertrain Engineering, Inc. Hybrid2 Conduct detailed long-term performance and economic analysis on a wide variety of hybrid power systems. RET Finance Calculate the cost of energy of renewable electricity generation

35

Property:DIA/Topic | Open Energy Information  

Open Energy Info (EERE)

Topic Topic Jump to: navigation, search Property Name DIA/Topics Property Type String Description Development Impacts Assessment Toolkit property to help filter pages Used in Form/Template Tool Allows Values Environmental;Economic;Social Pages using the property "DIA/Topic" Showing 7 pages using this property. A Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool + Environmental + Applied Dynamic Analysis of the Global Economy (ADAGE) Model + Environmental +, Economic + E Electricity Markets Analysis (EMA) Model + Environmental +, Economic +, Social + Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) + Environmental + P Powering Health + Social + T Threshold 21 Model + Social + U UNEP-Bioenergy Decision Support Tool + Environmental +, Economic +, Social +

36

Built Environment Energy Analysis Tool Overview (Presentation)  

SciTech Connect

This presentation provides an overview of the Built Environment Energy Analysis Tool, which is designed to assess impacts of future land use/built environment patterns on transportation-related energy use and greenhouse gas (GHG) emissions. The tool can be used to evaluate a range of population distribution and urban design scenarios for 2030 and 2050. This tool was produced as part of the Transportation Energy Futures (TEF) project, a Department of Energy-sponsored multi-agency project initiated to pinpoint underexplored strategies for abating GHGs and reducing petroleum dependence related to transportation.

Porter, C.

2013-04-01T23:59:59.000Z

37

Energy Analysis Models, Tools and Software Technologies - Energy ...  

Energy Analysis Models, Tools and Software Technology Marketing Summaries Here you’ll find marketing summaries of energy analysis models, tools, and software ...

38

Built Environment Analysis Tool: April 2013  

NLE Websites -- All DOE Office Websites (Extended Search)

Built Environment Analysis Tool Built Environment Analysis Tool April 2013 C. Porter Cambridge Systematics, Inc. Cambridge, Massachusetts NREL Technical Monitor: Laura Vimmerstedt Subcontract Report NREL/SR-6A20-58552 May 2013 NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency & Renewable Energy, operated by the Alliance for Sustainable Energy, LLC. National Renewable Energy Laboratory 15013 Denver West Parkway Golden, Colorado 80401 303-275-3000 * www.nrel.gov Contract No. DE-AC36-08GO28308 Built Environment Analysis Tool April 2013 C. Porter Cambridge Systematics, Inc. Cambridge, Massachusetts NREL Technical Monitor: Laura Vimmerstedt Prepared under Subcontract No. DGJ-1-11857-01 Subcontract Report NREL/SR-6A20-58552

39

Industrial Geospatial Analysis Tool for Energy Evaluation  

E-Print Network (OSTI)

IGATE-E is an industrial energy analysis tool. The tool is intended to be a decision support and planning tool to a wide spectrum of energy analysts, engineers, researchers, government organizations, private consultants, industry partners, and alike. The tool applies statistical modeling to multiple datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using information from DOE's Industrial Assessment Center database (IAC-DB) and DOE's Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool utilizes the DOE EIA-MECS energy survey data to validate bottom-up estimates and permits several statistical examinations.

Alkadi, N.; Starke, M.; Ma, O.; Nimbalkar, S.; Cox, D.; Dowling, K.; Johnson, B.; Khan, S.

2013-01-01T23:59:59.000Z

40

Building Technologies Office: Buildings Performance Database Analysis Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Buildings Performance Buildings Performance Database Analysis Tools to someone by E-mail Share Building Technologies Office: Buildings Performance Database Analysis Tools on Facebook Tweet about Building Technologies Office: Buildings Performance Database Analysis Tools on Twitter Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Google Bookmark Building Technologies Office: Buildings Performance Database Analysis Tools on Delicious Rank Building Technologies Office: Buildings Performance Database Analysis Tools on Digg Find More places to share Building Technologies Office: Buildings Performance Database Analysis Tools on AddThis.com... About Take Action to Save Energy Activities 179d Tax Calculator Advanced Energy Design Guides Advanced Energy Retrofit Guides

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


41

Analysis and Selection of Analytical Tools to Assess National...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Selection of Analytical Tools to Assess National-Interest Transmission Bottlenecks Final Report Analysis and Selection of Analytical Tools to Assess National-Interest...

42

JPL Tropical Cyclone Information System Analysis Tool | Data...  

NLE Websites -- All DOE Office Websites (Extended Search)

JPL Tropical Cyclone Information System Analysis Tool Dataset Summary Description This tool will let you analyze data associated with a storm. You can plot histograms, maps, and...

43

Desktop Analysis Reporting Tool (DART) User's Guide  

SciTech Connect

The Desktop Analysis Reporting Tool (DART) is a software package that allows a user to easily view and analyze radiation portal monitor (RPM) daily files that span long periods. DART gives users the capability to determine the state of health of a monitor, troubleshoot and diagnose problems, and view data in various time frames to perform trend analysis. In short, it converts the data strings written in the daily files into meaningful tables and plots. DART is an application-based program that was designed to maximize the benefit of a centralized data repository while distributing the workload to individual desktop machines. This networked approach requires a more complex database manager (SQL Server); however, SQL Server is not currently provided with the DART Installation Disk. SQL Express is sufficient for local data analysis and requires the installation of SQL Express and DART on each machine intended for analysis.

Lousteau, Angela L [ORNL; Alcala, Scott [ORNL

2012-04-01T23:59:59.000Z

44

BBAT: Bunch and bucket analysis tool  

Science Conference Proceedings (OSTI)

BBAT is written to meet the need of an interactive graphical tool to explore the longitudinal phase space. It is driven for testing new ideas or new tricks quickly. It is especially suitable for machine physicists or operation staff as well both in the control room during machine studies or off-line to analyze the data. The heart of the package contains a set of c-routines to do the number crunching. The graphics part is wired with scripting language tcl/tk and BLT. The c-routines are general enough that one can write new applications such as animation of the bucket as a machine parameter varies via a sliding scale. BBAT deals with single rf system. For double rf system, one can use Dr. BBAT, which stands for Double rf Bunch and Bucket Analysis Tool. One usage of Dr. BBAT is to visualize the process of bunch coalescing and flat bunch creation.

Deng, D.P.

1995-05-01T23:59:59.000Z

45

ProgramTopics Market analysis | Open Energy Information  

Open Energy Info (EERE)

Assistance Network Geothermal Incentives and Policies International Clean Energy Analysis Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs...

46

ProgramTopics Pathways analysis | Open Energy Information  

Open Energy Info (EERE)

Assistance Network Geothermal Incentives and Policies International Clean Energy Analysis Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs...

47

ProgramTopics Market Analysis | Open Energy Information  

Open Energy Info (EERE)

Assistance Network Geothermal Incentives and Policies International Clean Energy Analysis Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs...

48

Using expert systems components to enhance reliability analysis tools  

Science Conference Proceedings (OSTI)

In this paper we discuss the use of expert system components to enhance reliability analysis software tools. The discussion focuses on two expert systems built to enhance STAR and SUPER, reliability analysis tools developed at AT&T Bell Laboratories. ...

William B. Frakes; D. H. Myers

1988-06-01T23:59:59.000Z

49

Distribution System Analysis Tools for Studying High Penetration of PV  

E-Print Network (OSTI)

Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support Features Electric Energy System #12;#12;Distribution System Analysis Tools for Studying High Penetration of PV project titled "Distribution System Analysis Tools for Studying High Penetration of PV with Grid Support

50

Data, Statistical Analysis and Geo-Spatial Information Tools...  

NLE Websites -- All DOE Office Websites (Extended Search)

More About Us Job Opportunities Working With Us Visiting Us Center for Transportation Analysis Data, Statistical Analysis and Geo-Spatial Information Tools The Center for...

51

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Renewable...  

NLE Websites -- All DOE Office Websites (Extended Search)

NREL Energy Analysis Science and Technology Technology Transfer Technology Deployment Energy Systems Integration Dynamic Maps, GIS Data, and Analysis Tools Search More Search...

52

Buildings Performance Database Analysis Tools | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Commercial Buildings » Buildings Performance Database » Buildings Commercial Buildings » Buildings Performance Database » Buildings Performance Database Analysis Tools Buildings Performance Database Analysis Tools The Buildings Performance Database will offer four analysis tools for exploring building data and forecasting financial and energy savings: a Peer Group Tool, a Retrofit Analysis Tool, a Data Table Tool, and a Financial Forecasting Tool. Available now: Peer Group Tool The Peer Group Tool allows users to peruse the BPD, define peer groups, and analyze their performance. Users can create Peer Groups by filtering the dataset based on parameters such as building type, location, floor area, age, occupancy, and system characteristics such as lighting and HVAC type. The graphs show the energy performance distribution of those

53

Solid-State Lighting: Retrofit Financial Analysis Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Market-Based Programs Printable Version Share this resource Send a link to Solid-State Lighting: Retrofit Financial Analysis Tool to someone by E-mail Share Solid-State Lighting: Retrofit Financial Analysis Tool on Facebook Tweet about Solid-State Lighting: Retrofit Financial Analysis Tool on Twitter Bookmark Solid-State Lighting: Retrofit Financial Analysis Tool on Google Bookmark Solid-State Lighting: Retrofit Financial Analysis Tool on Delicious Rank Solid-State Lighting: Retrofit Financial Analysis Tool on Digg Find More places to share Solid-State Lighting: Retrofit Financial Analysis Tool on AddThis.com... LED Lighting Facts CALiPER Program Standards Development Technical Information Network Gateway Demonstrations Municipal Consortium About the Consortium FAQs

54

Built Environment Analysis Tool: April 2013  

Science Conference Proceedings (OSTI)

This documentation describes the tool development. It was created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions. This documentation also provides guidance on how to apply the tool.

Porter, C.

2013-05-01T23:59:59.000Z

55

PyRAT - python radiography analysis tool (u)  

SciTech Connect

PyRAT is a radiography analysis tool used to reconstruction images of unknown 1-0 objects. The tool is written in Python and developed for use on LINUX and Windows platforms. The tool is capable of performing nonlinear inversions of the images with minimal manual interaction in the optimization process. The tool utilizes the NOMAD mixed variable optimization tool to perform the optimization.

Temple, Brian A [Los Alamos National Laboratory; Buescher, Kevin L [Los Alamos National Laboratory; Armstrong, Jerawan C [Los Alamos National Laboratory

2011-01-14T23:59:59.000Z

56

Infrastructure Analysis Tools: A Focus on Cash Flow Analysis (Presentation)  

DOE Green Energy (OSTI)

NREL has developed and maintains a variety of infrastructure analysis models for the U.S. Department of Energy. Business case analysis has recently been added to this tool set. This presentation focuses on cash flow analysis. Cash flows depend upon infrastructure costs, optimized spatially and temporally, and assumptions about financing and revenue. NREL has incorporated detailed metrics on financing and incentives into the models. Next steps in modeling include continuing to collect feedback on regional/local infrastructure development activities and 'roadmap' dynamics, and incorporating consumer preference assumptions on infrastructure to provide direct feedback between vehicles and station rollout.

Melaina, M.; Penev, M.

2012-09-01T23:59:59.000Z

57

Hourly analysis of a very large topically categorized web query log  

E-Print Network (OSTI)

We review a query log of hundreds of millions of queries that constitute the total query traffic for an entire week of a generalpurpose commercial web search service. Previously, query logs have been studied from a single, cumulative view. In contrast, our analysis shows changes in popularity and uniqueness of topically categorized queries across the hours of the day. We examine query traffic on an hourly basis by matching it against lists of queries that have been topically pre-categorized by human editors. This represents 13 % of the query traffic. We show that query traffic from particular topical categories differs both from the query stream as a whole and from other categories. This analysis provides valuable insight for improving retrieval effectiveness and efficiency. It is also relevant to the development of enhanced query disambiguation, routing, and caching algorithms.

Steven M. Beitzel; Eric C. Jensen; Abdur Chowdhury; David Grossman; Ophir Frieder

2004-01-01T23:59:59.000Z

58

Runtime analysis tools for parallel scientific applications  

Science Conference Proceedings (OSTI)

This paper describes the Alpaca runtime tools. These tools leverage the component infrastructure of the Cactus Framework in a novel way to enable runtime steering, monitoring, and interactive control of a simulation. Simulation data can be observed graphically, ... Keywords: frameworks, runtime visualization, software/program verification

Oleg Korobkin; Gabrielle Allen; Steven R. Brandt; Eloisa Bentivegna; Peter Diener; Jinghua Ge; Frank Löffler; Erik Schnetter; Jian Tao

2011-07-01T23:59:59.000Z

59

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Hydrogen Maps  

NLE Websites -- All DOE Office Websites (Extended Search)

Donna Heimiller (2005). For more information on hydrogen resources, access the Hydrogen Energy Analysis and Tools site. For Geographic Information System (GIS) hydrogen resource...

60

SNAP Science and New Tools for Data Analysis (SNAP 2011)  

NLE Websites -- All DOE Office Websites (Extended Search)

SNAP Science and New Tools for Data Analysis (SNAP 2011) November 16 - 17, 2011 Spallation Neutron Source * Oak Ridge National Laboratory * Oak Ridge, Tennessee About the Workshop...

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


61

Analysis Methods and Tools Standing Technical Committee Strategic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Committee (STC) is to identify and track gaps and barriers related to energy analysis methods and tools that must be resolved to achieve the Building America Program goals...

62

H2A Hydrogen Production Analysis Tool (Presentation)  

NLE Websites -- All DOE Office Websites (Extended Search)

Cost Analyses Darlene Steward, NREL H2A Overview * Discounted cash flow analysis tool for production of hydrogen from various feedstocks - Inputs are; * Capital costs * Operating...

63

Nanoindentation Analysis as a Two-Dimensional Tool for Mapping ...  

Science Conference Proceedings (OSTI)

Effect of Stacking Fault Probability And ? Martensite on Damping Capacity of ... Nanoindentation Analysis as a Two-Dimensional Tool for Mapping the ...

64

A Green Anode Plant Performance Analysis Tool Fully Embedded In ...  

Science Conference Proceedings (OSTI)

Presentation Title, A Green Anode Plant Performance Analysis Tool Fully Embedded In The Plant Control System. Author(s), Xavier Genin, Pasquale Calo,

65

Scalable analysis tools for sensitivity analysis and UQ (3160) results.  

Science Conference Proceedings (OSTI)

The 9/30/2009 ASC Level 2 Scalable Analysis Tools for Sensitivity Analysis and UQ (Milestone 3160) contains feature recognition capability required by the user community for certain verification and validation tasks focused around sensitivity analysis and uncertainty quantification (UQ). These feature recognition capabilities include crater detection, characterization, and analysis from CTH simulation data; the ability to call fragment and crater identification code from within a CTH simulation; and the ability to output fragments in a geometric format that includes data values over the fragments. The feature recognition capabilities were tested extensively on sample and actual simulations. In addition, a number of stretch criteria were met including the ability to visualize CTH tracer particles and the ability to visualize output from within an S3D simulation.

Karelitz, David B.; Ice, Lisa G.; Thompson, David C.; Bennett, Janine C.; Fabian, Nathan; Scott, W. Alan; Moreland, Kenneth D.

2009-09-01T23:59:59.000Z

66

Category:EERE Analysis Tools | Open Energy Information  

Open Energy Info (EERE)

EERE Analysis Tools EERE Analysis Tools Jump to: navigation, search The U.S. Department of Energy funds energy analysis activities and produces analysis resources. On this website, energy analysts and policymakers can access energy analysis products related to renewable energy and energy efficiency, including published analyses, energy data and maps, and analysis tools such as models, software, and calculators. While the website provides links to select and important energy analysis products, it is not a comprehensive source of such products. Energy analysis affords an understanding of issues and opportunities that effective energy program management requires. http://www1.eere.energy.gov/analysis/index.html Pages in category "EERE Analysis Tools" The following 43 pages are in this category, out of 43 total.

67

ProMAT: protein microarray analysis tool  

SciTech Connect

Summary: ProMAT is a software tool for statistically analyzing data from ELISA microarray experiments. The software estimates standard curves, sample protein concentrations and their uncertainties for multiple assays. ProMAT generates a set of comprehensive figures for assessing results and diagnosing process quality. The tool is available for Windows or Mac, and is distributed as open-source Java and R code. Availability: ProMAT is available at http://www.pnl.gov/statistics/ProMAT. ProMAT requires Java version 1.5.0 and R version 1.9.1 (or more recent versions) which are distributed with the tool.

White, Amanda M.; Daly, Don S.; Varnum, Susan M.; Anderson, Kevin K.; Bollinger, Nikki; Zangar, Richard C.

2006-04-04T23:59:59.000Z

68

Darshan Performance Analysis Tool at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

Darshan darshan Darshan has been turned on by default on Hopper and Edison Description Darshan is a light weight IO profiling tool capable of profiling POSIX IO, MPIIO and HDF5 IO....

69

Novel Tool Allows Quicker, More Versatile Analysis of Energy Production  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tool Allows Quicker, More Versatile Analysis of Energy Tool Allows Quicker, More Versatile Analysis of Energy Production Technologies Novel Tool Allows Quicker, More Versatile Analysis of Energy Production Technologies June 19, 2012 - 1:00pm Addthis Washington, DC - A new energy production technology analysis tool that could lead to cost-effective improvements for energy generation and lower costs for consumers is now available on the National Energy Technology Laboratory (NETL) website. Available at no cost, the Power Systems Life Cycle Analysis Tool (Power LCAT) compares seven energy-production technologies: natural gas combined cycle, integrated gasification combined cycle, existing and supercritical pulverized coal, existing and new nuclear, and onshore wind. An option for capturing and sequestering carbon dioxide emissions is also included for

70

Property:ProgramTopics | Open Energy Information  

Open Energy Info (EERE)

ProgramTopics ProgramTopics Jump to: navigation, search This is a page of String. Pages using the property "ProgramTopics" Showing 25 pages using this property. (previous 25) (next 25) 2 2008 Solar Technologies Market Report + Market analysis +, Resource assessment + 2010 Carbon Sequestration Atlas of the United States and Canada: Third Edition + Potentials & Scenarios + 2010 Solar Market Transformation Analysis and Tools + Market analysis +, Pathways analysis +, Technology characterizations + 2010 Vehicle Technologies Market Report + Deployment Data + A A Case for Climate Neutrality: Case Studies on Moving Towards a Low Carbon Economy + Implementation +, Low emission development planning + A Compendium of Utility-Sponsored Energy-Efficient Rebate Programs + Policy +, Deployment +, & Program Impact +

71

New Tool Yields Custom Environmental Data for Lifecycle Analysis |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

New Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis September 10, 2012 - 1:00pm Addthis Washington, DC - A new, free online tool developed by a Department of Energy (DOE) laboratory allows users to customize and analyze the environmental impact of various fuels before they are used to create power. Information from the Excel™-based Upstream Dashboard - developed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) - can be used with other data or models to build an emissions inventory of various feedstocks as part of a comprehensive lifecycle analysis of the fuels. Lifecycle analysis is a new and innovative way to analyze and compare different pathways for producing power and transportation fuels.

72

New Tool Yields Custom Environmental Data for Lifecycle Analysis |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Tool Yields Custom Environmental Data for Lifecycle Analysis Tool Yields Custom Environmental Data for Lifecycle Analysis New Tool Yields Custom Environmental Data for Lifecycle Analysis September 10, 2012 - 1:00pm Addthis Washington, DC - A new, free online tool developed by a Department of Energy (DOE) laboratory allows users to customize and analyze the environmental impact of various fuels before they are used to create power. Information from the Excel™-based Upstream Dashboard - developed by the Office of Fossil Energy's National Energy Technology Laboratory (NETL) - can be used with other data or models to build an emissions inventory of various feedstocks as part of a comprehensive lifecycle analysis of the fuels. Lifecycle analysis is a new and innovative way to analyze and compare different pathways for producing power and transportation fuels.

73

Quasar: a new tool for concurrent Ada programs analysis  

Science Conference Proceedings (OSTI)

Concurrency introduces a high degree of combinatory which may be the source of subtle mistakes. We present a new tool, Quasar, which is based on ASIS and which uses fully the concept of patterns. The analysis of a concurrent Ada program by our tool proceeds ...

Sami Evangelista; Claude Kaiser; Jean-François Pradat-Peyre; Pierre Rousseau

2003-06-01T23:59:59.000Z

74

Building Energy Software Tools Directory: Psychrometric Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Calculator and Financial Loan Calculator. Screen Shots Keywords psychrometric analysis, HVAC ValidationTesting Program complies with the ASHRAE Methodology and is the engine for...

75

NREL: Energy Analysis - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

wind resource data in 13 developing countries. Contact Dan Getman for more information. Scenario Evaluation, Regionalization and Analysis (SERA) Determine optimal production and...

76

NREL: Energy Analysis - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

infrastructure analysis model. Biomass Scenario Model (BSM) Determine which supply chain changes would have the greatest potential to accelerate the deployment of biofuels....

77

Software-Based Building Airflow Analysis Tool for Enabling HVAC...  

NLE Websites -- All DOE Office Websites (Extended Search)

Software-Based Building Airflow Analysis Tool for Enabling HVAC Energy Use Savings in Commercial Buildings Speaker(s): Don Wroblewski Date: March 8, 2013 - 12:00pm Location:...

78

Street and Parking Facility Lighting Retrofit Financial Analysis Tool Webinar  

Energy.gov (U.S. Department of Energy (DOE))

DOE will present a live webinar titled "Using the Street and Parking Facility Lighting Retrofit Financial Analysis Tool" on Thursday, August 22, from 1:00 p.m. to 2:00 p.m. Eastern Daylight Time....

79

JAVA based LCD Reconstruction and Analysis Tools  

Science Conference Proceedings (OSTI)

We summarize the current status and future developments of the North American Group's Java-based system for studying physics and detector design issues at a linear collider. The system is built around Java Analysis Studio (JAS) an experiment-independent Java-based utility for data analysis. Although the system is an integrated package running in JAS, many parts of it are also standalone Java utilities.

Bower, G.

2004-10-11T23:59:59.000Z

80

Building Energy Software Tools Directory: Analysis Platform  

NLE Websites -- All DOE Office Websites (Extended Search)

Analysis Platform Analysis Platform Technical and economic performance estimation for building heating, cooling, and water heating equipment, including power generating options such as photovoltaics, fuel cells, and cogeneration. Based on representative loads in residential and commercial sectors. Focus on HVAC, aggregated electric, and integrated systems. Keywords heating, cooling, and SWH equipment, commercial buildings Validation/Testing N/A Expertise Required Moderate. Users N/A Audience Building end-use analysts, engineers, policy analysts. Input Building loads (selected from library, electric and fossil fuel rates, weather parameters, type of equipment, equipment operating parameters, and operating schedules. Allows detailed specification of equipment behavior, or use of default data. Data options correspond to selectable skills

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


81

Analysis & Tools to Spur Increased Deployment of " Waste Heat"  

Open Energy Info (EERE)

Tools to Spur Increased Deployment of " Waste Heat" Tools to Spur Increased Deployment of " Waste Heat" Rejection/Recycling Hybrid GHP Systems in Hot, Arid or Semiarid Climates Like Texas Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Analysis & Tools to Spur Increased Deployment of " Waste Heat" Rejection/Recycling Hybrid GHP Systems in Hot, Arid or Semiarid Climates Like Texas Project Type / Topic 1 Recovery Act - Geothermal Technologies Program: Ground Source Heat Pumps Project Type / Topic 2 Topic Area 2: Data Gathering and Analysis Project Description As GHP systems offer substantial energy efficiency by leveraging earth's intrinsic thermal capacitance, they could play a pivotal role in achieving the DoE's Building Technologies Pro-gram's "zero energy" goal in heavily cooling-dominated climates. Moreover, SHR-augmented GHP systems, in particular, could play a vital role in reducing building energy consumption and limiting greenhouse gas (GHG) emissions in heavily cooling dominated states, like Texas, which are experiencing large increases in population and correspondingly, peak electricity demand. If only 0.1% of Texas,' Arizona's, New Mexico's and Nevada's nearly 15 million-or 15,000-homes were to install new (or convert their existing HVAC or heat pump system to) a full or hybrid GHP system, it would result in between $400 and $800 million USD of new economic activity, most of which would be domestic. Moreover, these 15,000 homes would cut their annual energy consumption-and concomitant GHG emissions-by roughly 40-70%; on average they would save about $1,000 USD in annual operating costs, collectively saving about $15 million USD annually. A conservative GHP industry estimate is that at least 900 people would be directly employed for every 10,000 GHP units installed.

82

Summary of the Supplemental Model Reports Supporting the Disposal Criticality Analysis Methodology Topical Report  

SciTech Connect

The Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM) has committed to a series of model reports documenting the methodology to be utilized in the Disposal Criticality Analysis Methodology Topical Report (YMP 2000). These model reports detail and provide validation of the methodology to be utilized for criticality analyses related to: (1) Waste form/waste package degradation; (2) Waste package isotopic inventory; (3) Criticality potential of degraded waste form/waste package configurations (effective neutron multiplication factor); (4) Probability of criticality (for each potential critical configuration as well as total event); and (5) Criticality consequences. This purpose of this summary report is to provide a status of the model reports and a schedule for their completion. This report also provides information relative to the model report content and validation. The model reports and their revisions are being generated as a result of: (1) Commitments made in the Disposal Criticality Analysis Methodology Topical Report (YMP 2000); (2) Open Items from the Safety Evaluation Report (Reamer 2000); (3) Key Technical Issue agreements made during DOE/U.S. Nuclear Regulatory Commission (NRC) Technical Exchange Meeting (Reamer and Williams 2000); and (4) NRC requests for additional information (Schlueter 2002).

D. A. Brownson

2002-09-26T23:59:59.000Z

83

Database tools for enhanced analysis of TMX-U data  

SciTech Connect

A commercial database software package has been used to create several databases and tools that assist and enhance the ability of experimental physicists to analyze data from the Tandem Mirror Experiment-Upgrade (TMX-U) experiment. This software runs on a DEC-20 computer in M-Division's User Service Center at Lawrence Livermore National Laboratory (LLNL), where data can be analyzed offline from the main TMX-U acquisition computers. When combined with interactive data analysis programs, these tools provide the capability to do batch-style processing or interactive data analysis on the computers in the USC or the supercomputers of the National Magnetic Fusion Energy Computer Center (NMFECC) in addition to the normal processing done by the TMX-U acquisition system. One database tool provides highly reduced data for searching and correlation analysis of several diagnostic signals within a single shot or over many shots. A second database tool provides retrieval and storage of unreduced data for use in detailed analysis of one or more diagnostic signals. We will show how these database tools form the core of an evolving offline data analysis environment on the USC computers.

Stewart, M.E.; Carter, M.R.; Casper, T.A.; Meyer, W.H.; Perkins, D.E.; Whitney, D.M.

1986-03-06T23:59:59.000Z

84

A Semi-Automated Functional Test Data Analysis Tool  

SciTech Connect

The growing interest in commissioning is creating a demand that will increasingly be met by mechanical contractors and less experienced commissioning agents. They will need tools to help them perform commissioning effectively and efficiently. The widespread availability of standardized procedures, accessible in the field, will allow commissioning to be specified with greater certainty as to what will be delivered, enhancing the acceptance and credibility of commissioning. In response, a functional test data analysis tool is being developed to analyze the data collected during functional tests for air-handling units. The functional test data analysis tool is designed to analyze test data, assess performance of the unit under test and identify the likely causes of the failure. The tool has a convenient user interface to facilitate manual entry of measurements made during a test. A graphical display shows the measured performance versus the expected performance, highlighting significant differences that indicate the unit is not able to pass the test. The tool is described as semiautomated because the measured data need to be entered manually, instead of being passed from the building control system automatically. However, the data analysis and visualization are fully automated. The tool is designed to be used by commissioning providers conducting functional tests as part of either new building commissioning or retro-commissioning, as well as building owners and operators interested in conducting routine tests periodically to check the performance of their HVAC systems.

Xu, Peng; Haves, Philip; Kim, Moosung

2005-05-01T23:59:59.000Z

85

NREL: Energy Analysis - Wind Technology Analysis Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

design cost-based incentives (e.g., feed-in tariffs), and evaluate the impact of tax incentives or other support structures. CREST is a suite of three analytic tools, for...

86

NREL: News Feature - Biomass Analysis Tool Is Faster, More Precise  

NLE Websites -- All DOE Office Websites (Extended Search)

Biomass Analysis Tool Is Faster, More Precise Biomass Analysis Tool Is Faster, More Precise February 26, 2013 Photo of a left hand holding a rectangular tray that has 48 cups, each holding a small amount of a biomass sample. Below the tray is a slice of a poplar tree, about an inch thick and a foot in diameter. Enlarge image This tray of 80-milliliter samples was taken from a standard poplar tree, such as the one pictured here. It is ready to be loaded into NREL's molecular beam mass spectrometer for rapid analysis of the cell wall chemistry of each sample. Credit: Dennis Schroeder A screening tool from the U.S. Department of Energy's National Renewable Energy Laboratory (NREL) eases and greatly quickens one of the thorniest tasks in the biofuels industry: determining cell wall chemistry to find plants with ideal genes.

87

DOE Hydrogen Analysis Repository: Stranded Biogas Decision Tool for Fuel  

NLE Websites -- All DOE Office Websites (Extended Search)

Stranded Biogas Decision Tool for Fuel Cell Co-Production Stranded Biogas Decision Tool for Fuel Cell Co-Production Project Summary Full Title: Stranded Biogas Decision Tool for Fuel Cell Co-Production Project ID: 257 Principal Investigator: Michael Ulsh Brief Description: This project will explore the feasibility and utility of using stranded biogas resources in fuel cell co-production networks as well as lay the basis for development of analysis and decision-making tools for potential biogas sources and energy end-users to evaluate the economic feasibility of deploying these systems. Performer Principal Investigator: Michael Ulsh Organization: National Renewable Energy Laboratory (NREL) Address: 1617 Cole Blvd. Golden, CO 80401 Telephone: 303-275-3842 Email: michael.ulsh@nrel.gov Website: http://www.nrel.gov

88

Modeling Tools for Solid Oxide Fuel Cell Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools for Solid Oxide Fuel Tools for Solid Oxide Fuel Cell Design and Analysis Moe A Khaleel BJ Koeppel, W Liu, K Lai, KP Recknagle, EM Ryan, EV Stephens, X Sun Pacific Northwest National Laboratory Richland, WA 99352 11 th Annual SECA Workshop Pittsburgh, PA July 27-29, 2009 1 PNNL SOFC Modeling Tools SOFC-MP Stack level model for fast analysis of co/counter-flow SOFC stack performance Detailed electrochemistry model Cell level model for the investigation of secondary reactions (degradation/contamination) mechanisms within the tri-layer Component-based design and performance modeling Contact material Interconnect Glass seal 2 SOFC-MP Stack Simulation Code Recent Accomplishments Major memory improvements of 3D model to accommodate 50-cell stacks on LINUX platform. Previously, developed a 2D (or stacked

89

Building Energy Software Tools Directory: Overhang Annual Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

Overhang Annual Analysis Overhang Annual Analysis Screen shot of Overhang Annual Analysis Lets users visualize the shading performance of a window overhang for an entire year. Overhang Annual Analysis tool accepts a location and the dimensions of the window and overhang as inputs, and produces a chart depicting the amount that the overhang shades the window for each hour of the day, for each month of the year. Screen Shots Keywords window, overhang, shading, solar Validation/Testing Outputs verified against an overhang shadow calculator with an independent methodology, also produced by the author. Expertise Required None. Users Unknown, new tool, released August 2007. Audience Architects, builders, homeowners, passive solar designers, energy analysts Input Location, window dimensions, overhang dimensions.

90

FUTURE POWER GRID INITIATIVE Market Design Analysis Tool  

E-Print Network (OSTI)

FUTURE POWER GRID INITIATIVE Market Design Analysis Tool OBJECTIVE Power market design plays a critical role in the outcomes related to power system reliability and market efficiency. However, translation of market rules/designs into the complex mathematical market clearing mechanism is not a trivial

91

Orienting the Neighborhood: A Subdivision Energy Analysis Tool; Preprint  

DOE Green Energy (OSTI)

This paper describes a new computerized Subdivision Energy Analysis Tool being developed to allow users to interactively design subdivision street layouts while receiving feedback about energy impacts based on user-specified building design variants and availability of roof surfaces for photovoltaic and solar water heating systems.

Christensen, C.; Horowitz, S.

2008-07-01T23:59:59.000Z

92

The Adversarial Route Analysis Tool: A Web Application  

Science Conference Proceedings (OSTI)

The Adversarial Route Analysis Tool is a type of Google maps for adversaries. It's a web-based Geospatial application similar to Google Maps. It helps the U.S. government plan operations that predict where an adversary might be. It's easily accessible and maintainble and it's simple to use without much training.

Casson, William H. Jr. [Los Alamos National Laboratory

2012-08-02T23:59:59.000Z

93

Foundation Analysis and Design (FAD) Tools Version 5.1  

Science Conference Proceedings (OSTI)

Foundation Analysis and Design (FAD) Tools is a software package that provides for the design of transmission line foundations for single pole structures (MFAD), H-frame structures (HFAD) and steel towers (TFAD). The FAD Tools software provides for the design of drilled shafts and direct embedded poles in soil and rock for single pole foundations (MFAD), and drilled shafts and direct embedded poles in soil and rock for H-frame foundations (HFAD) and drilled shafts for steel towers (TFAD). The software ha...

2010-12-10T23:59:59.000Z

94

Topic Exploration and Distillation for Web Search by a Similarity-Based Analysis  

Science Conference Proceedings (OSTI)

Topic distillation is the process of finding representative pages relevant to a given query. Well-known topic distillation approaches such as the HITS algorithm have shown to be useful in identifying high quality pages. In this paper, we attempt to revisit ...

Xiaoyu Wang; Zhiguo Lu; Aoying Zhou

2002-08-01T23:59:59.000Z

95

Industrial Geospatial Analysis Tool for Energy Evaluation (IGATE-E)  

Science Conference Proceedings (OSTI)

IGATE-E is an energy analysis tool for industrial energy evaluation. The tool applies statistical modeling to multiple publicly available datasets and provides information at the geospatial resolution of zip code using bottom up approaches. Within each zip code, the current version of the tool estimates electrical energy consumption of manufacturing industries based on each type of industries using DOE s Industrial Assessment Center database (IAC-DB) and DOE s Energy Information Administration Manufacturing Energy Consumption Survey database (EIA-MECS DB), in addition to other commercially available databases such as the Manufacturing News database (MNI, Inc.). Ongoing and future work include adding modules for the predictions of fuel energy consumption streams, manufacturing process steps energy consumption, major energy intensive processes (EIPs) within each industry type among other metrics of interest. The tool provides validation against DOE s EIA-MECS state level energy estimations and permits several statistical examinations. IGATE-E is intended to be a decision support and planning tool to a wide spectrum of energy analysts, researchers, government organizations, private consultants, industry partners, and alike.

Alkadi, Nasr E [ORNL; Starke, Michael R [ORNL; Ma, Ookie [DOE EERE; Nimbalkar, Sachin U [ORNL; Cox, Daryl [ORNL

2013-01-01T23:59:59.000Z

96

Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Maintenance CalendarOutages is the tool to schedule network maintenance and troubleshooting. I've got network trouble. Help me out trouble@es.net is a quick and easy way to...

97

Environmental Analysis of Milling Machine Tool Use in Various Manufacturing Environments  

E-Print Network (OSTI)

Environmental Analysis of Milling Machine Tool Use inHorvath, David Dornfeld Milling is a type of cutting processof a standard vertical milling machine tool. In this

Diaz, Nancy; Helu, Moneer; Jayanathan, Stephen; Chen, Yifen; Horvath, Arpad; Dornfeld, David

2010-01-01T23:59:59.000Z

98

Petroleum Reduction Planning Tool | Open Energy Information  

Open Energy Info (EERE)

Petroleum Reduction Planning Tool Petroleum Reduction Planning Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Petroleum Reduction Planning Tool Agency/Company /Organization: National Renewable Energy Laboratory, United States Department of Energy Sector: Energy Focus Area: Biomass, Energy Efficiency, Fuels & Efficiency, Hydrogen, Transportation Phase: Prepare a Plan Topics: Analysis Tools, Pathways analysis Resource Type: Software/modeling tools User Interface: Website Complexity/Ease of Use: Not Available Website: www.afdc.energy.gov/afdc/prep/index.php OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Equivalent URI: cleanenergysolutions.org/content/petroleum-reduction-planning-tool Language: English Policies: Deployment Programs DeploymentPrograms: Demonstration & Implementation

99

NREL: Dynamic Maps, GIS Data, and Analysis Tools Home Page  

NLE Websites -- All DOE Office Websites (Extended Search)

The Dynamic Maps, Geographic Information System (GIS) Data and Analysis The Dynamic Maps, Geographic Information System (GIS) Data and Analysis Tools website provides maps, data and tools for renewable energy resources that determine which energy technologies are viable solutions in domestic and international regions. MapSearch - While this site contains detailed information and quality data, if you want to search for the latest and most up-to-date maps created by NREL, please visit our MapSearch: http://www.nrel.gov/gis/mapsearch/ Renewable Energy Technical Potential with the image of a presentation slide with map. The National Renewable Energy Laboratory's GIS team analyzes wind, solar, biomass, geothermal, and other energy resources and inputs the data into the GIS. Read more about how NREL's GIS staff and capabilities enhance the

100

TA-DA: A TOOL FOR ASTROPHYSICAL DATA ANALYSIS  

SciTech Connect

We present the Tool for Astrophysical Data Analysis (TA-DA), a new software aimed to greatly simplify and improve the analysis of stellar photometric data in comparison with theoretical models, and allow the derivation of stellar parameters from multi-band photometry. Its flexibility allows one to address a number of such problems: from the interpolation of stellar models, or sets of stellar physical parameters in general, to the computation of synthetic photometry in arbitrary filters or units; from the analysis of observed color-magnitude diagrams to a Bayesian derivation of stellar parameters (and extinction) based on multi-band data. TA-DA is available as a pre-compiled Interactive Data Language widget-based application; its graphical user interface makes it considerably user-friendly. In this paper, we describe the software and its functionalities.

Da Rio, Nicola [European Space Agency, Keplerlaan 1, 2200-AG Noordwijk (Netherlands); Robberto, Massimo, E-mail: ndario@rssd.esa.int [Space Telescope Science Institute, 3700 San Martin Dr., Baltimore, MD 21218 (United States)

2012-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


101

Autonomie Automotive Simulation Tool | Open Energy Information  

Open Energy Info (EERE)

Autonomie Automotive Simulation Tool Autonomie Automotive Simulation Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Autonomie Automotive Simulation Tool Agency/Company /Organization: Argonne National Laboratory Focus Area: Economic Development, Vehicles Phase: Create a Vision Topics: Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.transportation.anl.gov/modeling_simulation/PSAT/autonomie.html OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Autonomie[1] Rapidly evaluate new powertrain and propulsion technologies for improving fuel economy through virtual design and analysis in a math-based simulation environment. Argonne has developed a new tool, called Autonomie, to accelerate the

102

Building America Analysis Methods and Tools Standing Technical Committee Presentation  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analysis Analysis Methods and Tools Standing Technical Committee Meeting February 29, 2012 Building America Residential Energy Efficiency Stakeholder Meeting Austin, Texas Housekeeping *E-mail Ben Polly, ben.polly@nrel.gov to be added to committee E-mail list *Open committee: Invite others! *Next call: Tuesday, April 17, 1:00 - 2:00 PM (ET) Today's Agenda 1. Committee Purpose and Goals (10 min) 2. Brainstorming Session (30 min) 3. Strategic Plan (20 min) 1. Overview 2. Progress Update 4. Next Steps and Discussion (15) Introductions Audience Poll: *Familiar with Building America? *Attending a meeting of this committee for the first time? Building America *Department of Energy (DOE) funded *Industry-driven research program

103

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Maps  

NLE Websites -- All DOE Office Websites (Extended Search)

Bookmark and Share Bookmark and Share Maps NREL's GIS team develops maps for various renewable resources and for specific projects. As a benefit to the public, a majority of static maps are offered and Google Map (KML/KMZ) files on a tool called MapSearch. Biomass Maps Maps showing the biomass resources available in the United States by county. Feedstock categories include crop residues; forest residues; primary and secondary mill residues; urban wood waste; and methane emissions from manure management, landfills, and domestic wastewater treatment. Federal Energy Management Program The Federal Energy Management Program (FEMP) teamed with Geospatial Analysis staff at NREL to update the analysis for this project and created an interactive FEMP Screening Map application. The previous maps have been

104

Introducing an Online Cooling Tower Performance Analysis Tool  

E-Print Network (OSTI)

Cooling towers are used extensively for numerous industrial, residential, and commercial applications. Yet despite how common their uses, operators often do not know how to properly evaluate and optimize their performance. This is due to the complex and variable nature of all of the factors that can influence performance; fan speed, wind speed, sump temperature, heat load, ambient temperature, relative humidity, etc. This can be overwhelming for a regular operator resulting in many cooling towers being set to a default operating condition and forgotten. This paper will introduce a web-based cooling tower analysis tool being developed to help users understand and optimize operational efficiency. The calculations, evaluations, and models will be discussed in detail to highlight important design considerations and issues. This will include how the Merkel Theory, psychometric properties, tower types, and historical weather data are incorporated into the analysis.

Muller, M.R.; Muller, M.B.; Rao, P.

2012-01-01T23:59:59.000Z

105

Risk D&D Rapid Prototype: Scenario Documentation and Analysis Tool  

SciTech Connect

Report describes process and methodology associated with a rapid prototype tool for integrating project risk analysis and health & safety risk analysis for decontamination and decommissioning projects.

Unwin, Stephen D.; Seiple, Timothy E.

2009-05-28T23:59:59.000Z

106

Marginal Abatement Cost Tool (MACTool) | Open Energy Information  

Open Energy Info (EERE)

Marginal Abatement Cost Tool (MACTool) Marginal Abatement Cost Tool (MACTool) Jump to: navigation, search Tool Summary Name: Marginal Abatement Cost Tool (MACTool) Agency/Company /Organization: World Bank Climate Smart Planning Platform Sector: Climate, Energy Topics: Analysis Tools User Interface: Spreadsheet Complexity/Ease of Use: Simple Website: climatesmartplanning.org/node/33 Cost: Free Related Tools Global Relationship Assessment to Protect the Environment (GRAPE) Global Trade and Analysis Project (GTAP) Model MIT Emissions Prediction and Policy Analysis (EPPA) Model ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS A spreadsheet tool for building marginal abatement cost curves, and for calculating break-even carbon prices. Supports comparison of costs and

107

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Data Resources  

NLE Websites -- All DOE Office Websites (Extended Search)

Bookmark and Share Bookmark and Share Data Resources NREL's Geographic Information System (GIS) team develops technology-specific GIS data maps for a variety of areas, as well as targeted analysis tools that can help determine availability of renewable energy resources. Geographic Information System Data NREL's GIS Team develops technology-specific GIS data maps for a variety of areas, including biomass, geothermal, solar, wind, and renewable hydrogen. The team has made some of our datasets available for download through this Web site. 10km and 40km solar datasets are available for the United States and some international sites. 50m wind datasets are available for specific states, regions and some international sites. 25km wind datasets are available for the United States. 90m offshore wind datasets are available

108

Failure Analysis and Prevention  

Science Conference Proceedings (OSTI)

The following topics are of special interest: fatigue & fracture, tools & techniques for failure analysis, aerospace, aging Infrastructure/bridges, oil and gas, surface ...

109

Comparative Usability Study of Two Space Logistics Analysis Tools  

E-Print Network (OSTI)

Future space exploration missions and campaigns will require sophisticated tools to help plan and analyze logistics. To encourage their use, space logistics tools must be usable: a design concept encompassing terms such ...

Lee, Chairwoo

110

Topical Committee  

Energy.gov (U.S. Department of Energy (DOE))

In the interest of optimum technology transfer, the DOE Technical Standards Program (TSP) has set up a network of topical committees. These committees provide a forum for communication across the...

111

Orienting the Neighborhood: A Subdivision Energy Analysis Tool  

SciTech Connect

In subdivisions, house orientations are largely determined by street layout. The resulting house orientations affect energy consumption (annual and on-peak) for heating and cooling, depending on window area distributions and shading from neighboring houses. House orientations also affect energy production (annual and on-peak) from solar thermal and photovoltaic systems, depending on available roof surfaces. Therefore, house orientations fundamentally influence both energy consumption and production, and an appropriate street layout is a prerequisite for taking full advantage of energy efficiency and renewable energy opportunities. The potential influence of street layout on solar performance is often acknowledged, but solar and energy issues must compete with many other criteria and constraints that influence subdivision street layout. When only general guidelines regarding energy are available, these factors may be ignored or have limited effect. Also, typical guidelines are often not site-specific and do not account for local parameters such as climate and the time value of energy. For energy to be given its due consideration in subdivision design, energy impacts need to be accurately quantified and displayed interactively to facilitate analysis of design alternatives. This paper describes a new computerized Subdivision Energy Analysis Tool being developed to allow users to interactively design subdivision street layouts while receiving feedback about energy impacts based on user-specified building design variants and availability of roof surfaces for photovoltaic and solar water heating systems.

Christensen, C.; Horowitz, S.

2008-01-01T23:59:59.000Z

112

New tools for the analysis and design of building envelopes  

SciTech Connect

We describe the integrated development of PowerDOE, a new version of the DOE-2 building energy analysis program, and the Building Design Advisor (BDA), a multimedia-based design tool that assists building designers with the concurrent consideration of multiple design solutions with respect to multiple design criteria. PowerDOE has a windows-based Graphical User Interface (GUI) that makes it easier to use than DOE-2, while retaining DOE-2`s calculation power and accuracy. BDA, with a similar GUI, is designed to link to multiple analytical models and databases. In its first release it is linked to PowerDOE and a Daylighting Analysis Module, as well as to a Case Studies Database and a Schematic Graphic Editor. These allow building designers to set performance goals and address key building envelope parameters from the initial, schematic phases of building design to the detailed specification of building components and systems required by PowerDOE. The consideration of the thermal performance of building envelopes through PowerDOE and BDA is integrated with non-thermal envelope performance aspects, such as daylighting, as well as with the performance of non-envelope building components and systems, such as electric lighting and HVAC. Future versions of BDA will support links to CAD and electronic product catalogs, as well as provide context-dependent design advice to improve performance.

Papamichael, K.; Winkelmann, F.C.; Buhl, W.F.; Chauvet, H. [and others

1994-08-01T23:59:59.000Z

113

Building Energy Software Tools Directory: Tariff Analysis Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools by Country Australia Austria Belarus Belgium Brazil Canada Chile China Czech Republic Denmark Finland France Germany India Ireland Israel Italy Japan Netherlands New Zealand...

114

CrayPat Performance Analysis Tool at NERSC  

NLE Websites -- All DOE Office Websites (Extended Search)

(note: it has conflict with the default loaded "darshan" IO performance monitoring tool) Load the perftools-lite modulefile Build your application In batch script, set CRAYROOTFS...

115

Review of Performance Analysis Tools for MPI Parallel Programs  

E-Print Network (OSTI)

, Overhead, Loading, Inspection, Maintenance V - I Interaction Signaling, Loading & Unloading, Pantograph VAMPIRE Finite Element etc NUCARS Name of Tool Introductio n Inputs Output s Contac Comments+Rail Profiles Wheel data Vehicle data Substructure data Tools Structure impact vampire Mini-prof Clear Route #12

Corbard, Thierry

116

An overview and analysis of PDA forensic tools  

Science Conference Proceedings (OSTI)

Mobile handheld devices are becoming evermore affordable and commonplace in society. When they are involved in a security incident or crime, forensic specialists require tools that allow proper extraction and speedy examination of any digital evidence ... Keywords: Computer forensics, Forensic tools, Handheld devices

W. Jansen; R. Ayers

2005-06-01T23:59:59.000Z

117

Property:DIA/Topic/Economic | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:DIA/Topic/Economic Jump to: navigation, search Property Name DIA/Topics/Economic Property Type String Description Sub-property for DIA/Topic Development Impacts Assessment Toolkit property to help filter pages Used in Form/Template Tool Allows Values General;Gross Domestic Product;Energy Security;Sectoral Employment;Sectoral Outputs Pages using the property "DIA/Topic/Economic" Showing 25 pages using this property. (previous 25) (next 25) A Applied Dynamic Analysis of the Global Economy (ADAGE) Model + General +, Gross Domestic Product +, Sectoral Outputs +, ... Asia-Pacific Integrated Model (AIM) + General +, Gross Domestic Product + C CDM Sustainable Development Tool + General +

118

Property:DIA/Topic/Social | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:DIA/Topic/Social Jump to: navigation, search Property Name DIA/Topics/Social Property Type String Description Sub-property for DIA/Topic Development Impacts Assessment Toolkit property to help filter pages Used in Form/Template Tool Allows Values General;Education;Energy Access;Gender;Public Health Pages using the property "DIA/Topic/Social" Showing 25 pages using this property. (previous 25) (next 25) A Assessing Green Jobs Potential in Developing Countries: A Practitioner's Guide + General + C CDM Sustainable Development Tool + General +, Public Health + Co-benefits Risk Assessment (COBRA) Screening Model + Public Health + E E3MG + Public Health + Electricity Markets Analysis (EMA) Model + Public Health +

119

Property:DIA/Topic/Environmental | Open Energy Information  

Open Energy Info (EERE)

Property Property Edit with form History Facebook icon Twitter icon » Property:DIA/Topic/Environmental Jump to: navigation, search Property Name DIA/Topics/Environmental Property Type String Description Sub-property for DIA/Topic Development Impacts Assessment Toolkit property to help filter pages Used in Form/Template Tool Allows Values All;Air;Biodiversity;Climate Resilience;Greenhouse Gases;Water Pages using the property "DIA/Topic/Environmental" Showing 25 pages using this property. (previous 25) (next 25) A Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool + Air +, Greenhouse Gases +, All + Applied Dynamic Analysis of the Global Economy (ADAGE) Model + Greenhouse Gases +, All + Asia-Pacific Integrated Model (AIM) + Greenhouse Gases +, All +

120

Illustrative Scenarios Tool | Open Energy Information  

Open Energy Info (EERE)

Illustrative Scenarios Tool Illustrative Scenarios Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Illustrative Scenarios Tool Agency/Company /Organization: European Commission Focus Area: GHG Inventory Development Topics: Analysis Tools Website: www.eutransportghg2050.eu/cms/illustrative-scenarios-tool/ The SULTAN (SUstainabLe TrANsport) Illustrative Scenarios Tool is a high-level calculator to help provide estimates of the possible impacts of policy on transport in the European Union. The tool allows quick scoping of a range of transport policy options to help understand what scale of action might be required and may also be used as part of the analysis for final technical outputs of a project. How to Use This Tool This tool is most helpful when using these strategies:

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


121

Online Analysis of Wind and Solar Part II: Transmission Tool  

Science Conference Proceedings (OSTI)

To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. The tool analyzes and displays the impacts of uncertainties in forecasts of loads and renewable generation on: (1) congestion, (2)voltage and transient stability margins, and (3)voltage reductions and reactive power margins. The impacts are analyzed in the base case and under user-specified contingencies.A prototype of the tool has been developed and implemented in software.

Makarov, Yuri V.; Etingov, Pavel V.; Ma, Jian; Subbarao, Krishnappa

2012-01-31T23:59:59.000Z

122

Online Analysis of Wind and Solar Part I: Ramping Tool  

SciTech Connect

To facilitate wider penetration of renewable resources without compromising system reliability concerns arising from the lack of predictability of intermittent renewable resources, a tool for use by California Independent System Operator (CAISO) power grid operators was developed by Pacific Northwest National Laboratory (PNNL) in conjunction with CAISO with funding from California Energy Commission. This tool predicts and displays additional capacity and ramping requirements caused by uncertainties in forecasts of loads and renewable generation. The tool is currently operational in the CAISO operations center. This is one of two final reports on the project.

Etingov, Pavel V.; Ma, Jian; Makarov, Yuri V.; Subbarao, Krishnappa

2012-01-31T23:59:59.000Z

123

Application of the ORIGEN Fallout Analysis Tool and the DELFIC Fallout Planning Tool to National Technical Nuclear Forensics  

SciTech Connect

The objective of this project was to provide a robust fallout analysis and planning tool for the National Technical Nuclear Forensics interagency ground sample collection team. Their application called for a fast-running, portable mission-planning tool for use in response to emerging improvised nuclear device (IND) post-detonation situations. The project met those goals by research and development of models to predict the physical, chemical, and radiological properties of fallout debris. ORNL has developed new graphical user interfaces for two existing codes, the Oak Ridge Isotope Generation (ORIGEN) code and the Defense Land Fallout Interpretive Code (DELFIC). ORIGEN is a validated, radionuclide production and decay code that has been implemented into the Fallout Analysis Tool to predict the fallout source term nuclide inventory after the detonation of an IND. DELFIC is a validated, physics-based, research reference fallout prediction software package. It has been implemented into the Fallout Planning Tool and is used to predict the fractionated isotope concentrations in fallout, particle sizes, fractionation ratios, dose rate, and integrated dose over the planned collection routes - information vital to ensure quality samples for nuclear forensic analysis while predicting dose to the sample collectors. DELFIC contains a particle activity module, which models the radiochemical fractionation of the elements in a cooling fireball as they condense into and onto particles to predict the fractionated activity size distribution for a given scenario. This provides the most detailed physics-based characterization of the fallout source term phenomenology available in an operational fallout model.

Jodoin, Vincent J [ORNL; Lee, Ronald W [ORNL; Peplow, Douglas E. [ORNL; Lefebvre, Jordan P [ORNL

2011-01-01T23:59:59.000Z

124

POLICY ANALYSIS OF PRODUCED WATER ISSUES ASSOCIATED WITH IN-SITU THERMAL TECHNOLOGIES Topical Report  

E-Print Network (OSTI)

The authors would like to thank Michelle Kline for her assistance with mapping and GIS analysis. The authors would also like to thank Boyd Clayton, Deputy Utah State Engineer,

Robert Keiter; John Ruple; Heather Tanana; Doe Award; No. De-fe

2009-01-01T23:59:59.000Z

125

AnalyzeHOLE: An Integrated Wellbore Flow Analysis Tool  

SciTech Connect

Conventional interpretation of flow logs assumes that hydraulic conductivity is directly proportional to flow change with depth. However, well construction can significantly alter the expected relation between changes in fluid velocity and hydraulic conductivity. Strong hydraulic conductivity contrasts between lithologic intervals can be masked in continuously screened wells. Alternating intervals of screen and blank casing also can greatly complicate the relation between flow and hydraulic properties. More permeable units are not necessarily associated with rapid fluid-velocity increases. Thin, highly permeable units can be misinterpreted as thick and less permeable intervals or not identified at all. These conditions compromise standard flow-log interpretation because vertical flow fields are induced near the wellbore. AnalyzeHOLE, an integrated wellbore analysis tool for simulating flow and transport in wells and aquifer systems, provides a better alternative for simulating and evaluating complex well-aquifer system interaction. A pumping well and adjacent aquifer system are simulated with an axisymmetric, radial geometry in a two-dimensional MODFLOW model. Hydraulic conductivities are distributed by depth and estimated with PEST by minimizing squared differences between simulated and measured flows and drawdowns. Hydraulic conductivity can vary within a lithology but variance is limited with regularization. Transmissivity of the simulated system also can be constrained to estimates from single-well, pumping tests. Water-quality changes in the pumping well are simulated with simple mixing models between zones of differing water quality. These zones are differentiated by backtracking thousands of particles from the well screens with MODPATH. An Excel spreadsheet is used to interface the various components of AnalyzeHOLE by (1) creating model input files, (2) executing MODFLOW, MODPATH, PEST, and supporting FORTRAN routines, and (3) importing and graphically displaying pertinent results.

Keith J. Halford

2009-10-01T23:59:59.000Z

126

Novel tools for sequence and epitope analysis of glycosaminoglycans  

E-Print Network (OSTI)

Our understanding of glycosaminoglycan (GAG) biology has been limited by a lack of sensitive and efficient analytical tools designed to deal with these complex molecules. GAGs are heterogeneous and often sulfated linear ...

Behr, Jonathan Robert

2007-01-01T23:59:59.000Z

127

An Integrated Traverse Planner and Analysis Tool for Planetary Exploration  

E-Print Network (OSTI)

Future planetary explorations will require surface traverses of unprecedented frequency, length, and duration. As a result, there is need for exploration support tools to maximize productivity, scientific return, and safety. ...

Johnson, Aaron William

128

Report on the Third Static Analysis Tool Exposition (SATE ...  

Science Conference Proceedings (OSTI)

... is uncommon in C++, so tools usually do not look ... the client that the web page does not exist. ... Well, that attacker can already cause DoS by throwing ...

2013-05-07T23:59:59.000Z

129

Hourly analysis of a very large topically categorized web query log  

Science Conference Proceedings (OSTI)

We review a query log of hundreds of millions of queries that constitute the total query traffic for an entire week of a general-purpose commercial web search service. Previously, query logs have been studied from a single, cumulative view. In contrast, ... Keywords: query log analysis, web search

Steven M. Beitzel; Eric C. Jensen; Abdur Chowdhury; David Grossman; Ophir Frieder

2004-07-01T23:59:59.000Z

130

NREL: Dynamic Maps, GIS Data, and Analysis Tools - GIS Mailing...  

NLE Websites -- All DOE Office Websites (Extended Search)

Contents: Wind Barriers Impact Analysis, Wind Transportation Study, New Spatiotemporal Scenario Visualization Capabilities, Rooftop Photovoltaics Analysis, Solar Resource Data...

131

THE SNAP-II POWER CONVERSION SYSTEM. DYNAMIC ANALYSIS. TOPICAL REPORT NO. 3  

SciTech Connect

SNAP II is the designation for a nuclear auxiliary power unit, designed primarily for utilization in the WS117L satellite vehicle. The SNAP II system consists of a reactor heat source, a mercury Rankin engin, and an alternator. Dynamic analysis of the power conversion system was conducted utilizing a comprehensive analog computer simulation. Feasibility of a parasitic load control for numerous system disturbances was demonstrated. (auth)

Deibel, D.L.; Mrava, G.L.; Seldner, K.

1960-01-15T23:59:59.000Z

132

Turbine-Generator Topics for Power Plant Engineers: Fundamentals of Electromagnetic Signature Analysis  

Science Conference Proceedings (OSTI)

Electromagnetic signature analysis (EMSA) is the process used to evaluate the electromagnetic interference (EMI) generated by abnormalities in almost any energized power plant equipment—from cable connections to broken rotor bars in a motor to the isolated phase bus and generator step-up transformer. EMSA will detect any defect that involves EMI, noise, arcing, corona, partial discharge, gap discharge, sparking or microsparking, or any combination of these.With EMSA, every signal ...

2013-02-15T23:59:59.000Z

133

Building Energy Software Tools Directory: Tariff Analysis Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Tariff Analysis Project Tariff Analysis Project logo. There are many software solutions that determine the energy savings due to some new technology, but virtually no solutions...

134

Building Energy Software Tools Directory: Tariff Analysis Project  

NLE Websites -- All DOE Office Websites (Extended Search)

Keywords bill calculator, utility bills, tariff, schedules, rates, rate schedules, utility rates, utility tariffs, cost savings, energy savings analysis, investment analysis...

135

Economic evaluation and market analysis for natural gas utilization. Topical report  

Science Conference Proceedings (OSTI)

During the past decade, the U.S. has experienced a surplus gas supply. Future prospects are brightening because of increased estimates of the potential size of undiscovered gas reserves. At the same time, U.S. oil reserves and production have steadily declined, while oil imports have steadily increased. Reducing volume growth of crude oil imports was a key objective of the Energy Policy Act of 1992. Natural gas could be an important alternative energy source to liquid products derived from crude oil to help meet market demand. The purpose of this study was to (1) analyze three energy markets to determine whether greater use could be made of natural gas or its derivatives and (2) determine whether those products could be provided on an economically competitive basis. The following three markets were targeted for possible increases in gas use: transportation fuels, power generation, and chemical feedstock. Gas-derived products that could potentially compete in these three markets were identified, and the economics of the processes for producing those products were evaluated. The processes considered covered the range from commercial to those in early stages of process development. The analysis also evaluated the use of both high-quality natural gas and lower-quality gases containing CO{sub 2} and N{sub 2} levels above normal pipeline quality standards.

Hackworth, J.H.; Koch, R.W.; Rezaiyan, A.J.

1995-04-01T23:59:59.000Z

136

CE IGCC repowering project preliminary hazard analysis. Topical report, November 1, 1990--May 31, 1993  

SciTech Connect

A preliminary hazard analysis was conducted on the CE IGCC unit by representatives from ABB Lummus Crest Process Systems, Lummus Technical Division, Combustion Engineering, and Lummus Initial Operations. As a basis for the review, available technical data and documentation was used. Two areas of the unit were reviewed, the coal yard delivery system and the gasifier island. The coal yard consists of the coal delivery and handling systems, both of these systems are conventional. The gasifier island encompasses the coal pulverizer and feed system, gasifier and syngas cooler, char removal system, char recycle system, and high temperature sulfur removal system. With first of a kind equipment incorporated in the gasifier island, most of the concerns of potential hazards were centered here. At the time of the review, there were no process flow diagrams for the rest of the combined cycle. To prevent detaining the review of the gasifier island, the remaining areas were not reviewed at this time. However, the remaining areas will be reviewed before final unit design is completed. In reviewing the above mentioned systems, the PHA identified several hazards which will be the basis for a subsequent detailed Hazard and Operability (HAZOP) study which will be performed at a later stage of this project. Results from the evaluation were documented by the team and then reviewed by engineers in the IGCC Product Development department. From the concerns of risks developed by the review team, rethinking of proposed operation and design of the plant during the preliminary design stages took place. (In doing so, cost and redesign time during final design phase will be reduced).

Peletz, L.J.

1993-06-01T23:59:59.000Z

137

A review and statistical analysis of micellar-polymer field test data: Topical report  

SciTech Connect

A statistical analysis study has been made of 21 micellar-polymer field test projects to evaluate the significance of key parameters upon performance. In this study, the term micellar-polymer is used to describe surfactant recovery processes of which the most common are the water phase low tension and the soluble oil.The micellar slug is usually followed by a drive slug containing a polymer for mobility control. The data include 10 projects that were used in a previous study and 11 other documented projects which have been completed recently. The study indicates three significant correlations. The most important of these is the correlation showing that oil recovery is inversely related to the log of the reservoir connate water salinity. This suggests that prior flooding with a water near the design salinity or use of preflushes to adjust salinity and remove hardness have, at best, been only partially effective. Exxon was successful in their second Loudon pilot when using a specifically designed salt tolerant surfactant, with no preflush. The results of this study, coupled with the results of the Exxon second Loudon pilot, suggest that future research in micellar-polymer flooding should focus on the development of surfactants which can tolerate the connate water salinity and hardness in the reservoir. A second correlation showed that oil recovery increased as the pattern size was decreased. This is attributed to the higher frontal velocities and to the reduced tendency of slug breakdown in smaller patterns. Low oil cuts at the beginning of the micellar-polymer floods indicated that higher recovery efficiency could not be attributed to infill drilling. The third correlation showed the expected results that oil recovery is related to the quantity of surfactant used. This quantity is the product of the surfactant slug volume and the concentration of surfactant. 71 refs., 4 figs., 2 tabs.

Lowry, P.H.; Ferrell, H.H.; Dauben, D.L.

1986-11-01T23:59:59.000Z

138

On-Line Tools - Center for Transportation Analysis  

NLE Websites -- All DOE Office Websites (Extended Search)

On-Line Tools On-Line Tools Fuel Economy Website - This interactive website allows consumers to factor fuel efficiency into their car buying decisions by allowing side by side fuel economy comparisons of new model year vehicles. This site also contains information on advanced techonolgy vehicles, the environment, and a well organized links section, making it a gateway for those interested in researching vehicles on the web. Contact: Bo Saulsbury. Transportation Energy Data Book: Edition 32 - Designed as a desk-top reference, the data book includes statistics and other information that characterize transportation activity and/or influence transportation energy use. The Transportation Energy Data Book: Edition 32 is available in pdf format by clicking on the above link and is also available in hard copy. To

139

Office of Fossil EnergyTOPICAL REPORT: DEVELOPMENT OF CFD_BASED SIMULATION TOOLS FOR IN SITU THERMAL PROCESSING OF OIL SHALE/SANDS  

E-Print Network (OSTI)

This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. In our research, we are taking the novel approach of developing and applying high performance computing, computational fluid dynamics (CFD)-based simulation tools to a modified in-situ process for production of oil from oil shale. The simulation tools being developed capture the relevant physical processes and data from a large-scale system. The modified in-situ application

Michal Hradisky; Philip J. Smith; Doe Award; No. De-fe

2009-01-01T23:59:59.000Z

140

An agent-based tool for infrastructure interdependency policy analysis.  

SciTech Connect

Complex Adaptive Systems (CAS) can be applied to investigate complex infrastructure interdependencies such as those between the electric power and natural gas markets. These markets are undergoing fundamental transformations including major changes in electric generator fuel sources. Electric generators that use natural gas as a fuel source are rapidly gaining market share. These generators introduce direct interdependency between the electric power and natural gas markets. These interdependencies have been investigated using the emergent behavior of CAS model agents within the Spot Market Agent Research Tool Version 2.0 Plus Natural Gas (SMART II+).

North, M. J.

2000-12-14T23:59:59.000Z

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


141

NREL: Dynamic Maps, GIS Data, and Analysis Tools - GIS Staff  

NLE Websites -- All DOE Office Websites (Extended Search)

GIS Staff GIS Staff The following includes summary bios of Geographic Information System (GIS) staff expertise and interests in analysis relating to geospatial analytics and integrated resource assessment; our energy efficiency and renewable energy data warehouse; and advanced visualization. Daniel Getman Pamela Gray-Hann Donna Heimiller Dylan Hettinger Anthony Lopez Jenny Melius Ted Quinby Billy J. Roberts Photo of Daniel Getman Daniel Getman GIS Scientist IV - Geospatial Section Supervisor Areas of expertise Project management, client management, and team leadership Development of geospatial data management, analysis and visualization systems Spatial statistical analysis methods Enhancement and analysis of remotely sensed data Primary research interests Scientific programming

142

NISTIR 7100, PDA Forensic Tools: an Overview and Analysis  

Science Conference Proceedings (OSTI)

... allow import of numerous types of filesystem images for analysis, including version 2 ... device relies on flash ROM for its filesystem, instead of RAM. ...

2012-05-29T23:59:59.000Z

143

Pages that link to "Climate Analysis Indicators Tool (CAIT)"...  

Open Energy Info (EERE)

Assistance Network Geothermal Incentives and Policies International Clean Energy Analysis Low Emission Development Strategies Oil & Gas Smart Grid Solar U.S. OpenLabs...

144

Web-based Analysis Tools for Appliance Efficiency Policies in...  

NLE Websites -- All DOE Office Websites (Extended Search)

Appliance Standards Project (CLASP) is to transfer appliance efficient policy analysis technologies and benefits to developing countries. In this talk we describe the...

145

Applying observations of work activity in designing prototype data analysis tools  

Science Conference Proceedings (OSTI)

Designers, implementers, and marketers of data analysis tools typically have different perspectives than users. Consequently, data analysis often find themselves using tools focused on graphics and programming concepts rather than concepts which reflect their own domain and the context of their work. Some user studies focus on usability tests late in development; others observe work activity, but fail to show how to apply that knowledge in design. This paper describes a methodology for applying observations of data analysis work activity in prototype tool design. The approach can be used both in designing improved data analysis tools, and customizing visualization environments to specific applications. We present an example of user-centered design for a prototype tool to cull large data sets. We revisit the typical graphical approach of animating a large data set from the point of view of an analysis who is culling data. Field evaluations using the prototype tool not only revealed valuable usability information, but initiated in-depth discussions about user`s work, tools, technology, and requirements.

Springmeyer, R.R.

1993-07-06T23:59:59.000Z

146

Analysis and Selection of Analytical Tools to Assess National-Interest  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Analysis and Selection of Analytical Tools to Assess Analysis and Selection of Analytical Tools to Assess National-Interest Transmission Bottlenecks Final Report Analysis and Selection of Analytical Tools to Assess National-Interest Transmission Bottlenecks Final Report This work described in this report was coordinated by the Consortium for Electric Reliability Technology Solutions and funded by the U.S. Department of Energy, Office of Electric Transmission and Distribution under Contract No. DE AC03-76SF00098. Analysis and Selection of Analytical Tools to Assess National-Interest Transmission Bottlenecks Final Report More Documents & Publications THE VALUE OF ECONOMIC DISPATCH A REPORT TO CONGRESS PURSUANT TO SECTION 1234 OF THE ENERGY POLICY ACT OF 2005 2006 National Electric Transmission Congestion Study and Related Materials

147

Evaluating program analysis and testing tools with the RUGRAT random benchmark application generator  

Science Conference Proceedings (OSTI)

Benchmarks are heavily used in different areas of computer science to evaluate algorithms and tools. In program analysis and testing, open-source and commercial programs are routinely used as bench- marks to evaluate different aspects of algorithms ...

Ishtiaque Hussain; Christoph Csallner; Mark Grechanik; Chen Fu; Qing Xie; Sangmin Park; Kunal Taneja; B. M. Mainul Hossain

2012-07-01T23:59:59.000Z

148

Knowledge-centric and language independent framework for safety analysis tools  

Science Conference Proceedings (OSTI)

This paper presents a knowledge-centric and language independent framework and its application to develop safety analysis tools for avionics systems. A knowledge-centric approach is important to address domain-specific needs, with respect to the types ...

S. C. Kothari; Luke Bishop; Jeremias Sauceda; Gary Daugherty

2004-03-01T23:59:59.000Z

149

An integrated traverse planner and analysis tool for future lunar surface exploration  

E-Print Network (OSTI)

This thesis discusses the Surface Exploration Traverse Analysis and Navigation Tool (SEXTANT), a system designed to help maximize productivity, scientific return, and safety on future lunar and planetary explorations,. The ...

Johnson, Aaron William

2010-01-01T23:59:59.000Z

150

First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten Needs for Intelligence Analysis Tool Development  

E-Print Network (OSTI)

First Annual Conference on Intelligence Analysis Methods and Tools, May 2005 PNNL-SA-44274 Top Ten. The Pacific Northwest National Laboratory (PNNL) has for some time been involved in both the development development and/or enhancement. 2. Approach We conducted a one-day workshop with analysts em- ployed at PNNL

151

CDM Sustainable Development Tool | Open Energy Information  

Open Energy Info (EERE)

CDM Sustainable Development Tool CDM Sustainable Development Tool Jump to: navigation, search Tool Summary Name: CDM Sustainable Development Tool Agency/Company /Organization: United Nations Framework Convention on Climate Change (UNFCCC) Secretariat Sector: Climate, Energy Topics: Analysis Tools User Interface: Website Complexity/Ease of Use: Simple Website: www.research.net/s.aspx?sm=18gHbqaSXStje1ZSfnNI3k2%2Be9hblXIZ7ZPrqk8cV Cost: Free Related Tools Alternative Fuel and Advanced Technology Vehicles Pilot Program Emissions Benefit Tool Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) TEEMP ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS An online tool that highlights the co-benefits brought about by Clean Development Mechanism (CDM) projects.

152

NETL: PPII - Topical Reports  

NLE Websites -- All DOE Office Websites (Extended Search)

Topical Reports Power Plant Improvement Initiative (PPII) Topical Reports Topical Report 26: Mercury Control Demonstration Projects - (February 2008) PDF-1.2MB This report...

153

Comparing Chiller-Plant Analysis Tools: Commercial Cooling Update, Issue 20, December 1999  

Science Conference Proceedings (OSTI)

This document provides a brief overview of HVAC analysis tools, focusing on those for chiller plants. A review of 14 tools, ranging from simplified to complex, finds a wide variation in calculation methods, HVAC system capabilities, available energy rate structures, and purchase cost. EPRI's ChillerCalc, which provides first-order analysis for chiller plants, compares favorably with other programs, offering critical features not included by some, such as time-of-use (TOU) energy rates, demand ratchets, l...

1999-12-13T23:59:59.000Z

154

GPA a tool for fluid scalability analysis of massively parallel systems  

E-Print Network (OSTI)

analysis, GPA first generates an abstract representation of the system of ODEs and then dynamically. Hayden, and J. T. Bradley, "Fluid Analysis of Energy Consumption using Rewards in Massively ParallelGPA ­ a tool for fluid scalability analysis of massively parallel systems Anton Stefanek Richard A

Imperial College, London

155

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Webmaster  

NLE Websites -- All DOE Office Websites (Extended Search)

Webmaster Webmaster To contact the Webmaster, please provide your name, e-mail address, and message below. When you are finished, click "Send Message." NOTE: If you enter your e-mail address incorrectly, we will be unable to reply. Your name: Your email address: Your message: Send Message Printable Version NREL GIS Home About NREL GIS Renewable Energy Technical Potential Maps Data Resources Data Visualization & Geospatial Tools GIS Staff Publications Mailing List Contact Us Did you find what you needed? Yes 1 No 0 Thank you for your feedback. Would you like to take a moment to tell us how we can improve this page? Submit We value your feedback. Thanks! We've received your feedback. Something went wrong. Please try again later. NREL is a national laboratory of the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, operated by the Alliance for Sustainable Energy, LLC.

156

Building Energy Software Tools Directory: BTU Analysis Plus  

NLE Websites -- All DOE Office Websites (Extended Search)

Plus Plus BTU Analysis Plus logo. Heat load calculation program that performs comprehensive heat load studies with hardcopy printouts of the results. The BTU Analysi Plus program is designed for general heating, air-conditioning, and commerical studies. Since 1987, the BTU Analysis family of programs have been commercially distributed and are marketed through professional organizations, trade advertisements, and word of mouth. They are currently used in six (6) foriegn countries and the U.S. Used in temperate, tropic, artic, and arid climates. They have proved themselves easy to use, accurate and productive again and again. A version of BTU Analysis Plus was adopted for use in the revised HEATING VENTILATING AND AIR CONDITIONING FUNDAMENTALS by Raymond A. Havrella.

157

LaTaT: language and text analysis tools  

Science Conference Proceedings (OSTI)

LaTaT is a Language and Text Analysis Toolset. This paper gives a brief description of the components comprising LaTaT, including a Minimalist parser and language and concept learning programs.

Dekang Lin

2001-03-01T23:59:59.000Z

158

Benchmarking and Energy Saving Tool | Open Energy Information  

Open Energy Info (EERE)

Benchmarking and Energy Saving Tool Benchmarking and Energy Saving Tool Jump to: navigation, search Tool Summary Name: Benchmarking and Energy Saving Tool Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Energy Efficiency, - Central Plant, Industry Topics: Pathways analysis Resource Type: Software/modeling tools User Interface: Spreadsheet Website: industrial-energy.lbl.gov/node/100 Cost: Free Language: English References: Benchmarking and Energy Saving Tool [1] Logo: Benchmarking and Energy Saving Tool The Benchmarking and Energy Saving Tool (BEST) is an Excel-based spreadsheet energy analysis tool developed by Lawrence Berkeley National Laboratory. The Benchmarking and Energy Saving Tool (BEST) is an Excel-based spreadsheet energy analysis tool developed by Lawrence Berkeley National

159

Combination of job oriented simulation with ecological material flow analysis as integrated analysis tool for business production processes  

Science Conference Proceedings (OSTI)

This paper outlines the application of a special Environmental Management Information System (EMIS) as combination of discrete event simulation with ecological material flow analysis for a selected production process. The software tool serves as decision ...

Philip Joschko; Bernd Page; Volker Wohlgemuth

2009-12-01T23:59:59.000Z

160

Building Energy Software Tools Directory: BTU Analysis REG  

NLE Websites -- All DOE Office Websites (Extended Search)

REG REG BTU Analysis REG logo. Heat load calculation program that performs comprehensive heat load studies with hardcopy printouts of the results. The REG program is designed for general heating, air-conditioning, and light commercial studies. Since 1987, the BTU Analysis family of programs have been commercially distributed and are marketed through professional organizations, trade advertisements, and word of mouth. They are currently used in six (6) foriegn countries and the U.S. Used in temperate, tropic, artic, and arid climates. They have proved themselves easy to use, accurate and productive again and again. A version of BTU Analysis, was adopted for use in the revised HEATING VENTILATING AND AIR CONDITIONING FUNDAMENTALS by Raymond A. Havrella. Keywords

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


161

An open source tool for heart rate variability spectral analysis  

Science Conference Proceedings (OSTI)

In this paper we describe a software package for developing heart rate variability analysis. This package, called RHRV, is a third party extension for the open source statistical environment R, and can be freely downloaded from the R-CRAN repository. ... Keywords: Apnea, Heart rate variability, Open source, Signal processing

L. Rodríguez-Liñares; A. J. Méndez; M. J. Lado; D. N. Olivieri; X. A. Vila; I. Gómez-Conde

2011-07-01T23:59:59.000Z

162

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Federal Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Federal Energy Management Program Federal Energy Management Program The Federal Energy Management Program (FEMP) teamed with Geospatial Analysis staff at NREL to update the analysis for this project and created an interactive FEMP Screening Map application. The previous maps have been archived. If you have a need for one of the archived maps, please contact the Webmaster. This new application examines the viability of three solar technologies in the United States with a high-level annualized economic calculation, with and without potential savings from available renewable energy incentives at the state and federal level. This map allows users to access the results of those calculations, look in more detail at their areas of interest, and overlay other layers, such as renewable energy resource data for solar,

163

Decision Analysis Tool to Compare Energy Pathways for Transportation  

Science Conference Proceedings (OSTI)

With the goals of reducing greenhouse gas emissions, oil imports, and energy costs, a wide variety of automotive technologies are proposed to replace the traditional gasoline-powered internal combustion engine (g-ICE). A prototype model, Analytica Transportation Energy Analysis Model (ATEAM), has been developed using the Analytica decision modeling environment, visualizing the structure as a hierarchy of influence diagrams. The report summarized the FY2010 ATEAM accomplishments.

Bloyd, Cary N.; Stork, Kevin

2011-02-01T23:59:59.000Z

164

Power Systems Life Cycle Analysis Tool (Power L-CAT).  

SciTech Connect

The Power Systems L-CAT is a high-level dynamic model that calculates levelized production costs and tracks environmental performance for a range of electricity generation technologies: natural gas combined cycle (using either imported (LNGCC) or domestic natural gas (NGCC)), integrated gasification combined cycle (IGCC), supercritical pulverized coal (SCPC), existing pulverized coal (EXPC), nuclear, and wind. All of the fossil fuel technologies also include an option for including carbon capture and sequestration technologies (CCS). The model allows for quick sensitivity analysis on key technical and financial assumptions, such as: capital, O&M, and fuel costs; interest rates; construction time; heat rates; taxes; depreciation; and capacity factors. The fossil fuel options are based on detailed life cycle analysis reports conducted by the National Energy Technology Laboratory (NETL). For each of these technologies, NETL's detailed LCAs include consideration of five stages associated with energy production: raw material acquisition (RMA), raw material transport (RMT), energy conversion facility (ECF), product transportation and distribution (PT&D), and end user electricity consumption. The goal of the NETL studies is to compare existing and future fossil fuel technology options using a cradle-to-grave analysis. The NETL reports consider constant dollar levelized cost of delivered electricity, total plant costs, greenhouse gas emissions, criteria air pollutants, mercury (Hg) and ammonia (NH3) emissions, water withdrawal and consumption, and land use (acreage).

Andruski, Joel; Drennen, Thomas E.

2011-01-01T23:59:59.000Z

165

MetaBrowser: A combined browsing, query, and analysis tool  

SciTech Connect

The MetaBrowser design is based on the premise that scientists should not be forced to learn new languages or commands for finding the data they are interested in and for selecting subsets of the data for further analysis. Furthermore, there should be a single system that permits browsing, query, and analysis of the data, so that the scientist does not have to switch between systems. The current version for the MetaBrowser was designed for the DOE CEDR (Comprehensive Epidemiological Data Resource) project, but the same principles can apply to other scientific disciplines. Browsing and query should be combined. It is quite natural for a user to explore the information in the database before deciding what subset of the data to select for further analysis. In general, if there is a large number of datasets (i.e. databases) in the system, then the user would want to find out information about the various datasets (called metadata), before choosing one or more datasets for further exploration. Thus, a metadatabase that holds information about datasets in the systems must exist.

Shoshani, A.; Szeto, E.

1991-04-01T23:59:59.000Z

166

Power Systems Life Cycle Analysis Tool (Power L-CAT).  

SciTech Connect

The Power Systems L-CAT is a high-level dynamic model that calculates levelized production costs and tracks environmental performance for a range of electricity generation technologies: natural gas combined cycle (using either imported (LNGCC) or domestic natural gas (NGCC)), integrated gasification combined cycle (IGCC), supercritical pulverized coal (SCPC), existing pulverized coal (EXPC), nuclear, and wind. All of the fossil fuel technologies also include an option for including carbon capture and sequestration technologies (CCS). The model allows for quick sensitivity analysis on key technical and financial assumptions, such as: capital, O&M, and fuel costs; interest rates; construction time; heat rates; taxes; depreciation; and capacity factors. The fossil fuel options are based on detailed life cycle analysis reports conducted by the National Energy Technology Laboratory (NETL). For each of these technologies, NETL's detailed LCAs include consideration of five stages associated with energy production: raw material acquisition (RMA), raw material transport (RMT), energy conversion facility (ECF), product transportation and distribution (PT&D), and end user electricity consumption. The goal of the NETL studies is to compare existing and future fossil fuel technology options using a cradle-to-grave analysis. The NETL reports consider constant dollar levelized cost of delivered electricity, total plant costs, greenhouse gas emissions, criteria air pollutants, mercury (Hg) and ammonia (NH3) emissions, water withdrawal and consumption, and land use (acreage).

Andruski, Joel; Drennen, Thomas E.

2011-01-01T23:59:59.000Z

167

Strategic Analysis of the Global Status of Carbon Capture and...  

Open Energy Info (EERE)

Summary LAUNCH TOOL Name: Strategic Analysis of the Global Status of Carbon Capture and Storage: Country Studies, Brazil Focus Area: Clean Fossil Energy Topics: Policy Impacts...

168

Cost-Benefit Analysis of Smart Grid Technologies Through System...  

Open Energy Info (EERE)

TOOL Name: Spain Installed Wind Capacity Website Focus Area: Renewable Energy Topics: Market Analysis Website: www.gwec.netindex.php?id131 Equivalent URI:...

169

Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT): Semi-Annual Progress Report  

SciTech Connect

This report summarizes work carried out by the Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) Team for the period of July 1, 2011 through December 31, 2011. It discusses highlights, overall progress, period goals, and collaborations and lists papers and presentations. The UV-CDAT team is positioned to address the following high-level visualization requirements: (1) Alternative parallel streaming statistics and analysis pipelines - Data parallelism, Task parallelism, Visualization parallelism; (2) Optimized parallel input/output (I/O); (3) Remote interactive execution; (4) Advanced intercomparison visualization; (5) Data provenance processing and capture; and (6) Interfaces for scientists - Workflow data analysis and visualization construction tools, Visualization interfaces.

Williams, D N

2012-02-29T23:59:59.000Z

170

IBIXFIT: A Tool For The Analysis Of Microcalorimeter PIXE Spectra  

SciTech Connect

PIXE analysis software has been for long mainly tuned to the needs of Si(Li) detector based spectra analysis and quantification methods based on K{sub {alpha}} or L{sub {alpha}} X-ray lines. Still, recent evidences related to the study of relative line intensities and new developments in detection equipment, namely the emergence of commercial microcalorimeter based X-ray detectors, have brought up the possibility that in the near future PIXE will become more than just major lines quantification. A main issue that became evident as a consequence of this was the need to be able to fit PIXE spectra without prior knowledge of relative line intensities. Considering new developments it may be necessary to generalize PIXE to a wider notion of ion beam induced X-ray (IBIX) emission, to include the quantification of processes such as Radiative Auger Emission. In order to answer to this need, the IBIXFIT code was created based much on the Bayesian Inference and Simulated Annealing routines implemented in the Datafurnace code [1]. In this presentation, the IBIXFIT is used to fit a microcalorimeter spectrum of a Ba{sub x}Sr{sub (1-x)}TiO{sub 3} thin film sample and the specific possibility of selecting between fixed and free line ratios combined with other specificities of the IBIXFIT algorithm are shown to be essential to overcome the problems faced.

Taborda, A.; Reis, M. A. [Instituto Tecnologico e Nuclear, Estrada Nacional 10, Sacavem, Apartado 21, 2686-953 Sacavem (Portugal); Centro de Fisica Atomica da Universidade de Lisboa, Av. Prof. Gama Pinto, 2, 1649-003 Lisboa (Portugal); Alves, L. C.; Barradas, N. P. [Instituto Tecnologico e Nuclear, Estrada Nacional 10, Sacavem, Apartado 21, 2686-953 Sacavem (Portugal); Centro de Fisica Nuclear da Universidade de Lisboa, Av. Prof. Gama Pinto, 2, 1649-003 Lisboa (Portugal); Chaves, P. C. [Instituto Tecnologico e Nuclear, Estrada Nacional 10, Sacavem, Apartado 21, 2686-953 Sacavem (Portugal); Centro de Fisica Atomica da Universidade de Lisboa, Av. Prof. Gama Pinto, 2, 1649-003 Lisboa (Portugal); Instituto Superior Tecnico da Universidade Tecnica de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal)

2011-06-01T23:59:59.000Z

171

National Household Travel Survey (NHTS): Travel Trends, Analysis and Data Tools  

E-Print Network (OSTI)

of the nation's transportation system to meet current demands and accommodate future demands; to assess of alternative transportation investment programs; and to assess the energy-use and air-quality impacts Analysis Data, Statistical Analysis Geo-Spatial Information Tools Defense Transportation Energy Policy

172

A tool for mapping and spatio-temporal analysis of hydrological data  

Science Conference Proceedings (OSTI)

There is a need in water sciences for computational tools to integrate large spatially distributed datasets to provide insight into the spatial and temporal domains of the data while allowing visualization, analysis in the spatial and temporal dimensions, ... Keywords: Data visualization, GIS, Geospatial software, Hydrological modeling, Integrated environmental modeling, Spatio-temporal analysis

J. A. Guzman, D. N. Moriasi, M. L. Chu, P. J. Starks, J. L. Steiner, P. H. Gowda

2013-10-01T23:59:59.000Z

173

Modelling sequential text with an adaptive topic model  

Science Conference Proceedings (OSTI)

Topic models are increasingly being used for text analysis tasks, often times replacing earlier semantic techniques such as latent semantic analysis. In this paper, we develop a novel adaptive topic model with the ability to adapt topics from both the ...

Lan Du; Wray Buntine; Huidong Jin

2012-07-01T23:59:59.000Z

174

Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Global Solar Opportunity Tool: A Tool for Policy Makers and Energy Analysts Focus Area: Solar Topics: Potentials & Scenarios Website: cleanenergysolutions.org/tools/solar Equivalent URI: cleanenergysolutions.org/content/global-solar-opportunity-tool-tool-po Language: English The Global Solar Opportunity Tool enables analysis and visualization of the technical and economic potential for solar electric technologies ranging

175

Advancing lighting and daylighting simulation: The transition from analysis to design aid tools  

SciTech Connect

This paper explores three significant software development requirements for making the transition from stand-alone lighting simulation/analysis tools to simulation-based design aid tools. These requirements include specialized lighting simulation engines, facilitated methods for creating detailed simulatable building descriptions, an automated techniques for providing lighting design guidance. Initial computer implementations meant to address each of these requirements are discussed to further elaborate these requirements and to illustrate work-in-progress.

Hitchcock, R.J.

1995-05-01T23:59:59.000Z

176

Environmental sampling and analysis as a safeguards tool  

SciTech Connect

Environmental sampling and radionuclide analysis of the resulting material can be utilized as a supplemental approach in safeguarding practices and particularly for detection of undeclared nuclear activities. The production of nuclear weapons could be pursued by uranium enrichment processes to produce highly enriched U-235 or by nuclear reactor operations followed by chemical separations to produce Pu-239. The application of either of these processes results in the production of signature materials, some of which will be released to the environs. Results from the operations of the Hanford production facilities are discussed and indicate the type of signatures that may be expected from plutonium production facilities. These include noble gas emissions from the reactors and chemical separations processes, the production of radionuclides in reactor cooling water followed by their subsequent release to the Columbia River, and the release of mildly contaminated process water from the chemical processing facilities. These signature materials are carried by both gaseous and liqid effluents and enter various compartments of the environment. The types of signature materials which are most likely to be accumulated are discussed, together with examples of the quantities which have been released during past separations. There are numerous processes by which natural uranium may be enriched to produce highly enriched U-235. The most definitive signature of such processes is always a modification in uranium isotope ratios, and materials showing either enriched or depleted uranium in gaseous and liquid effluents provide the best indication that uramium enrichment processes are taking place. Therefore, techniques for sampling and analysis of airborne, waterborne, or deposited uranium in environmental matrices provide a means of detecting uranium enrichment which may lead to proliferation products.

Perkins, R.W.; Wogman, N.A.; Holdren, G.R.

1994-03-01T23:59:59.000Z

177

Bitraker Anvil: Binary instrumentation for rapid creation of simulation and workload analysis tools  

E-Print Network (OSTI)

A wide range of ARM developers from architects, to compiler writers, to software developers, need tools to understand, analyze, and simulate program behavior. For developers to achieve high levels of system and program correctness, performance, reliability, and power efficiency these tools must be fast and customizable to the problems at hand. BitRaker Anvil is a tool building framework allowing developers to rapidly build tools to achieve these goals. BitRaker Anvil uses binary instrumentation to modify ARM binaries for the purpose of analyzing program behavior. BitRaker Anvil equips the developer with an easy to use API that allows the user to specify the particular program characteristics to analyze. Using this API, the developer can create custom tools to perform simulation or workload analysis several orders of magnitude faster than using a cycle level simulator. Prior binary instrumentation technology requires that analysis code be merged into the same binary as the code to be analyzed. A key new feature of our binary instrumentation framework is ReHost analysis, which allows an instrumented ARM binary to make calls to analysis code that is written in the native format of the desktop machine. Using this for cross-platform ARM development results in analysis that runs orders of magnitude faster while simultaneously reducing the size of the ARM binary images. 1

Brad Calder; Todd Austin; Don Yang; Timothy Sherwood; Suleyman Sair; David Newquist; Tim Cusac

2004-01-01T23:59:59.000Z

178

Strengthened IAEA Safeguards-Imagery Analysis: Geospatial Tools for Nonproliferation Analysis  

SciTech Connect

This slide presentation focuses on the growing role and importance of imagery analysis for IAEA safeguards applications and how commercial satellite imagery, together with the newly available geospatial tools, can be used to promote 'all-source synergy.' As additional sources of openly available information, satellite imagery in conjunction with the geospatial tools can be used to significantly augment and enhance existing information gathering techniques, procedures, and analyses in the remote detection and assessment of nonproliferation relevant activities, facilities, and programs. Foremost of the geospatial tools are the 'Digital Virtual Globes' (i.e., GoogleEarth, Virtual Earth, etc.) that are far better than previously used simple 2-D plan-view line drawings for visualization of known and suspected facilities of interest which can be critical to: (1) Site familiarization and true geospatial context awareness; (2) Pre-inspection planning; (3) Onsite orientation and navigation; (4) Post-inspection reporting; (5) Site monitoring over time for changes; (6) Verification of states site declarations and for input to State Evaluation reports; and (7) A common basis for discussions among all interested parties (Member States). Additionally, as an 'open-source', such virtual globes can also provide a new, essentially free, means to conduct broad area search for undeclared nuclear sites and activities - either alleged through open source leads; identified on internet BLOGS and WIKI Layers, with input from a 'free' cadre of global browsers and/or by knowledgeable local citizens (a.k.a.: 'crowdsourcing'), that can include ground photos and maps; or by other initiatives based on existing information and in-house country knowledge. They also provide a means to acquire ground photography taken by locals, hobbyists, and tourists of the surrounding locales that can be useful in identifying and discriminating between relevant and non-relevant facilities and their associated infrastructure. The digital globes also provide highly accurate terrain mapping for better geospatial context and allow detailed 3-D perspectives of all sites or areas of interest. 3-D modeling software (i.e., Google's SketchUp6 newly available in 2007) when used in conjunction with these digital globes can significantly enhance individual building characterization and visualization (including interiors), allowing for better assessments including walk-arounds or fly-arounds and perhaps better decision making on multiple levels (e.g., the best placement for International Atomic Energy Agency (IAEA) video monitoring cameras).

Pabian, Frank V [Los Alamos National Laboratory

2012-08-14T23:59:59.000Z

179

Final report on LDRD project: Simulation/optimization tools for system variability analysis  

SciTech Connect

>This work was conducted during FY98 (Proposal Number 98-0036) and FY99 (Proposal Number 99-0818) under the auspices of the Sandia National Laboratories Laboratory-Directed Research and Development (LDRD) program. Electrical simulation typically treats a single data point in the very large input space of component properties. For electrical simulation to reach its full potential as a design tool, it must be able to address the unavoidable variability and uncertainty in component properties. Component viability is strongly related to the design margin (and reliability) of the end product. During the course of this project, both tools and methodologies were developed to enable analysis of variability in the context of electrical simulation tools. Two avenues to link relevant tools were also developed, and the resultant toolset was applied to a major component.

R. L. Bierbaum; R. F. Billau; J. E. Campbell; K. D. Marx; R. J. Sikorski; B. M. Thompson; S. D. Wix

1999-10-01T23:59:59.000Z

180

Performance Analysis Tools Working Session | U.S. DOE Office of Science  

Office of Science (SC) Website

Performance Analysis Tools Working Performance Analysis Tools Working Session Advanced Scientific Computing Research (ASCR) ASCR Home About Research Applied Mathematics Computer Science Exascale Tools Workshop Programming Challenges Workshop Architectures I Workshop External link Architectures II Workshop External link Next Generation Networking Scientific Discovery through Advanced Computing (SciDAC) Computational Science Graduate Fellowship (CSGF) ASCR SBIR-STTR Facilities Science Highlights Benefits of ASCR Funding Opportunities Advanced Scientific Computing Advisory Committee (ASCAC) News & Resources Contact Information Advanced Scientific Computing Research U.S. Department of Energy SC-21/Germantown Building 1000 Independence Ave., SW Washington, DC 20585 P: (301) 903-7486 F: (301) 903-4846 E: sc.ascr@science.doe.gov More Information »

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


181

Test data will be used to validate advanced turbine design and analysis tools.  

E-Print Network (OSTI)

Test data will be used to validate advanced turbine design and analysis tools. NREL signed a Cooperative Research and Development Agreement with Alstom in 2010 to conduct certification testing certification testing in 2011. Tests to be conducted by NREL include a power quality test to finalize

182

Human factors simulation tools for the course of action analysis in COIN  

Science Conference Proceedings (OSTI)

Analyzing and modeling of insurgency behavior and decisions is a complex task that can only be conducted by systematic as well as system-view methods. Different approaches like Human Behavior Representation (HBR), Organization Behavior Representation ... Keywords: Human Behavior Representation (HBR), Mass Behavior Representation (MBR), Organization Behavior Representation (OBR), cognitive modeling, decision support tool, mission analysis

Markus Bresinsky; Harald Schaub

2008-06-01T23:59:59.000Z

183

DRIVE Analysis Tool Generates Custom Vehicle Drive Cycles Based on Real-World Data (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet from the National Renewable Energy Laboratory describes the Drive-Cycle Rapid Investigation, Visualization, and Evaluation (DRIVE) analysis tool, which uses GPS and controller area network data to characterize vehicle operation and produce custom vehicle drive cycles, analyzing thousands of hours of data in a matter of minutes.

Not Available

2013-04-01T23:59:59.000Z

184

Analysis of the Impact of Fuel Cell Vehicles on Energy Systems...  

Open Energy Info (EERE)

AgencyCompany Organization Tohoku University Focus Area Fuels & Efficiency, Hydrogen Topics Analysis Tools, Policy Impacts, Policy Impacts Website http:www.iaee.org...

185

NREL-Decision-Support Tools Demonstration | Open Energy Information  

Open Energy Info (EERE)

NREL-Decision-Support Tools Demonstration NREL-Decision-Support Tools Demonstration Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision-Support Tools Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Topics: Policies/deployment programs, Pathways analysis, Technology characterizations Resource Type: Software/modeling tools, Presentation, Training materials Website: prod-http-80-800498448.us-east-1.elb.amazonaws.com//w/images/2/29/WIRE Decision-Support Tools Screenshot References: Decision-Support Tools [1] Logo: Decision-Support Tools "This is a short demonstration of three decision-support tools: GsT, HOMER, and JEDI. These tools can be used to make informed decisions regarding the application of renewable energy technologies." Summary

186

Regulatory cross-cutting topics for fuel cycle facilities.  

Science Conference Proceedings (OSTI)

This report overviews crosscutting regulatory topics for nuclear fuel cycle facilities for use in the Fuel Cycle Research&Development Nuclear Fuel Cycle Evaluation and Screening study. In particular, the regulatory infrastructure and analysis capability is assessed for the following topical areas:Fire Regulations (i.e., how applicable are current Nuclear Regulatory Commission (NRC) and/or International Atomic Energy Agency (IAEA) fire regulations to advance fuel cycle facilities)Consequence Assessment (i.e., how applicable are current radionuclide transportation tools to support risk-informed regulations and Level 2 and/or 3 PRA) While not addressed in detail, the following regulatory topic is also discussed:Integrated Security, Safeguard and Safety Requirement (i.e., how applicable are current Nuclear Regulatory Commission (NRC) regulations to future fuel cycle facilities which will likely be required to balance the sometimes conflicting Material Accountability, Security, and Safety requirements.)

Denman, Matthew R.; Brown, Jason; Goldmann, Andrew Scott; Louie, David

2013-10-01T23:59:59.000Z

187

A Graph Analytical Approach for Topic Detection  

Science Conference Proceedings (OSTI)

Topic detection with large and noisy data collections such as social media must address both scalability and accuracy challenges. KeyGraph is an efficient method that improves on current solutions by considering keyword cooccurrence. We show that KeyGraph ... Keywords: KeyGraph-based Topic Detection, Topic detection, community detection, network analysis

Hassan Sayyadi, Louiqa Raschid

2013-12-01T23:59:59.000Z

188

Multimodal Information Group- Tools  

Science Conference Proceedings (OSTI)

... Architecture and Tools for Linguistic Analysis Systems. Miscellaneous Tools. Name, Description. ... JobRunner is a tool designed to run a job (ie to ...

2013-07-12T23:59:59.000Z

189

An introduction to TR-X: a simplified tool for standardized analysis  

SciTech Connect

TR-X is a multi-platform program that provides a graphical interface to Monte Carlo N-Particle transport (MCNP) and Monte Carlo N-Particle transport eXtended (MCNPX) codes. Included in this interface are tools to reduce the tedium of input file creation, provide standardization of model creation and analysis, and expedite the execution of the created models. TR-X provides tools to make the rapid testing of multiple permutations of these models easier, while also building in standardization that allows multiple solutions to be compared.

Johns, Russell C [Los Alamos National Laboratory; Waters, Laurie S [Los Alamos National Laboratory; Fallgren, Andrew J [Los Alamos National Laboratory; Ghoreson, Gregory G [UNIV OF TEXAS

2010-09-09T23:59:59.000Z

190

Virtual tool mark generation for efficient striation analysis in forensic science  

SciTech Connect

In 2009, a National Academy of Sciences report called for investigation into the scienti#12;c basis behind tool mark comparisons (National Academy of Sciences, 2009). Answering this call, Chumbley et al. (2010) attempted to prove or disprove the hypothesis that tool marks are unique to a single tool. They developed a statistical algorithm that could, in most cases, discern matching and non-matching tool marks made at di#11;erent angles by sequentially numbered screwdriver tips. Moreover, in the cases where the algorithm misinterpreted a pair of marks, an experienced forensics examiner could discern the correct outcome. While this research served to con#12;rm the basic assumptions behind tool mark analysis, it also suggested that statistical analysis software could help to reduce the examiner's workload. This led to a new tool mark analysis approach, introduced in this thesis, that relies on 3D scans of screwdriver tip and marked plate surfaces at the micrometer scale from an optical microscope. These scans are carefully cleaned to remove noise from the data acquisition process and assigned a coordinate system that mathematically de#12;nes angles and twists in a natural way. The marking process is then simulated by using a 3D graphics software package to impart rotations to the tip and take the projection of the tip's geometry in the direction of tool travel. The edge of this projection, retrieved from the 3D graphics software, becomes a virtual tool mark. Using this method, virtual marks are made at increments of 5#14; and compared to a scan of the evidence mark. The previously developed statistical package from Chumbley et al. (2010) performs the comparison, comparing the similarity of the geometry of both marks to the similarity that would occur due to random chance. The resulting statistical measure of the likelihood of the match informs the examiner of the angle of the best matching virtual mark, allowing the examiner to focus his/her mark analysis on a smaller range of angles. Preliminary results are quite promising. In a study with both sides of 6 screwdriver tips and 34 corresponding marks, the method distinguished known matches from known non-matches with zero false positive matches and only two matches mistaken for non-matches. For matches, it could predict the correct marking angle within #6;5-10#14;. Moreover, on a standard desktop computer, the virtual marking software is capable of cleaning 3D tip and plate scans in minutes and producing a virtual mark and comparing it to a real mark in seconds. These results support several of the professional conclusions of the tool mark analysis com- munity, including the idea that marks produced by the same tool only match if they are made at similar angles. The method also displays the potential to automate part of the comparison process, freeing the examiner to focus on other tasks, which is important in busy, backlogged crime labs. Finally, the method o#11;ers the unique chance to directly link an evidence mark to the tool that produced it while reducing potential damage to the evidence.

Ekstrand, Laura [Ames Laboratory

2012-11-16T23:59:59.000Z

191

Built Environment Energy Analysis Tool Overview (Presentation), NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

Built Environment Built Environment Energy Analysis Tool Overview Prepared by: Chris Porter Cambridge Systematics, Inc. Cambridge, Massachusetts NREL Technical Monitor: Laura Vimmerstedt March 2013 NREL/PR-6A20-58101 2 Built Environment Energy Analysis Tool Overview Subcontractor: Chris Porter Cambridge Systematics, Inc. 100 Cambridge Park Drive, Suite 400 Cambridge, MA 02140 Period of Performance: June 2011-February 2013 NREL Technical Monitor: Laura Vimmerstedt Prepared under Subcontract No. DGJ-1-11857-01 This publication was reproduced from the best available copy submitted by the subcontractor and received no editorial review at NREL. NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the

192

NeedATool: A NEEDLET ANALYSIS TOOL FOR COSMOLOGICAL DATA PROCESSING  

SciTech Connect

We introduce NeedATool (Needlet Analysis Tool), a software for data analysis based on needlets, a wavelet rendition which is powerful for the analysis of fields defined on a sphere. Needlets have been applied successfully to the treatment of astrophysical and cosmological observations, and in particular to the analysis of cosmic microwave background (CMB) data. Usually, such analyses are performed in real space as well as in its dual domain, the harmonic one. Both spaces have advantages and disadvantages: for example, in pixel space it is easier to deal with partial sky coverage and experimental noise; in the harmonic domain, beam treatment and comparison with theoretical predictions are more effective. During the last decade, however, wavelets have emerged as a useful tool for CMB data analysis, since they allow us to combine most of the advantages of the two spaces, one of the main reasons being their sharp localization. In this paper, we outline the analytical properties of needlets and discuss the main features of the numerical code, which should be a valuable addition to the CMB analyst's toolbox.

Pietrobon, Davide; Gorski, Krzysztof M. [Jet Propulsion Laboratory, California Institute of Technology, 4800 Oak Grove Drive, Pasadena, CA 91109 (United States); Balbi, Amedeo; Cabella, Paolo, E-mail: davide.pietrobon@jpl.nasa.go, E-mail: krzysztof.m.gorski@jpl.nasa.go, E-mail: amedeo.balbi@roma2.infn.i, E-mail: paolo.cabella@roma2.infn.i [Dipartimento di Fisica, Universita di Roma 'Tor Vergata', via della Ricerca Scientifica 1, 00133 Roma (Italy)

2010-11-01T23:59:59.000Z

193

Evaluation of tools for renewable energy policy analysis: The ten federal region model  

Science Conference Proceedings (OSTI)

The Energy Policy Act of 1992 establishes a program to support development of renewable energy technologies including a production incentive to public power utilities. Because there is a wide range of possible policy actions that could be taken to increase electric market share for renewables, modeling tools are needed to help make informed decisions regarding future policy. Previous energy modeling tools did not contain the region or infrastructure focus necessary to examine renewable technologies. As a result, the Department of Energy Office of Utility Technologies (OUT) supported the development of tools for renewable energy policy analysis. Three models were developed: The Renewable Energy Penetration (REP) model, which is a spreadsheet model for determining first-order estimates of policy effects for each of the ten federal regions; the Ten Federal Region Model (TFRM), which employs utility capacity expansion and dispatching decision; and the Region Electric Policy Analysis Model (REPAM), which was constructed to allow detailed insight into interactions between policy and technology within an individual region. These Models were developed to provide a suite of fast, personal-computer based policy analysis tools; as one moves from the REP model to the TFRM to the REPAM the level of detail (and complexity) increases. In 1993 a panel was formed to identify model strengths, weaknesses (including any potential biases) and to suggest potential improvements. The panel met in January 1994 to discuss model simulations and to deliberate regarding evaluation outcomes. This report is largely a result of this meeting. This report is organized as follows. It provides a description of the TFRM and summarizes the panel`s findings. Individual chapters examine various aspects of the model: demand and load, capacity expansion, dispatching and production costing, reliability, renewables, storage, financial and regulatory concerns, and environmental effects.

Engle, J.

1994-04-01T23:59:59.000Z

194

CLEAN-Technology Roadmapping: Lessons, Experiences and Tools Webinar | Open  

Open Energy Info (EERE)

form form View source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit with form History Facebook icon Twitter icon » CLEAN-Technology Roadmapping: Lessons, Experiences and Tools Webinar Jump to: navigation, search Tool Summary Name: Technology Roadmapping: Lessons, Experiences and Tools Webinar Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Topics: Low emission development planning, Pathways analysis, Technology characterizations Resource Type: Video, Presentation, Webinar, Training materials References: Technology Roadmapping: Lessons, Experiences and Tools Webinar[1] Logo: Technology Roadmapping: Lessons, Experiences and Tools Webinar

195

Topic: Product Data  

Science Conference Proceedings (OSTI)

Topic: Product Data. Event. Model-Based Enterprise Summit. TDP Standards Development Summit. Group. Life Cycle Engineering Group. ...

2012-09-19T23:59:59.000Z

196

Topic: Wind Engineering  

Science Conference Proceedings (OSTI)

Topic: Wind Engineering. Forty-Fourth Meeting of the UJNR Panel on Wind and Seismic Effects. NIST researchers collected ...

2011-08-31T23:59:59.000Z

197

Topics in Nuclear Structure  

E-Print Network (OSTI)

We consider work performed over the last decade on single-j-shell studies. We will discuss four topics.

Escuderos, Alberto

2013-01-01T23:59:59.000Z

198

Data Analysis Software Tools for Enhanced Collaboration at the DIII-D National Fusion Facility  

SciTech Connect

Data analysis at the DIII-D National Fusion Facility is simplified by the use of two software packages in analysis codes. The first is GAP1otObj, an IDL-based object-oriented library used in visualization tools for dynamic plotting. GAPlotObj gives users the ability to manipulate graphs directly through mouse and keyboard-driven commands. The second software package is MDSplus, which is used at DIED as a central repository for analyzed data. GAPlotObj and MDSplus reduce the effort required for a collaborator to become familiar with the DIII-D analysis environment by providing uniform interfaces for data display and retrieval. Two visualization tools at DIII-D that benefit from them are ReviewPlus and EFITviewer. ReviewPlus is capable of displaying interactive 2D and 3D graphs of raw, analyzed, and simulation code data. EFITviewer is used to display results from the EFIT analysis code together with kinetic profiles and machine geometry. Both bring new possibilities for data exploration to the user, and are able to plot data from any fusion research site with an MDSplus data server.

Schachter, J.; Peng, Q.; Schissel, D.P.

1999-07-01T23:59:59.000Z

199

UNDP-Energy Costing Tool | Open Energy Information  

Open Energy Info (EERE)

UNDP-Energy Costing Tool UNDP-Energy Costing Tool (Redirected from UNDP Energy Costing Tool) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNDP Energy Costing Tool Agency/Company /Organization: United Nations Development Programme Sector: Energy Topics: Pathways analysis, Resource assessment Resource Type: Software/modeling tools User Interface: Spreadsheet Website: www.undp.org/energy/mdg-serv.htm Cost: Free Equivalent URI: cleanenergysolutions.org/content/energy-costing-tool Language: English References: UNDP MDG Support Services [1] The Energy Costing Tool is an Excel-based model designed to help countries estimate the costs of increasing access to energy services to support the achievement of the UN Millennium Development Goals (MGD). More information is available on the

200

PV Installation Labor Market Analysis and PV JEDI Tool Developments (Presentation), NREL (National Renewable Energy Laboratory)  

NLE Websites -- All DOE Office Websites (Extended Search)

PV Installation Labor Market Analysis PV Installation Labor Market Analysis and PV JEDI Tool Developments Barry Friedman NREL Strategic Energy Analysis Center May 16, 2012 World Renewable Energy Forum Denver, Colorado NREL/PR-6A20-55130 NATIONAL RENEWABLE ENERGY LABORATORY Disclaimer 2 DISCLAIMER AGREEMENT These information ("Data") are provided by the National Renewable Energy Laboratory ("NREL"), which is operated by the Alliance for Sustainable Energy LLC ("Alliance") for the U.S. Department of Energy (the "DOE"). It is recognized that disclosure of these Data is provided under the following conditions and warnings: (1) these Data have been prepared for reference purposes only; (2) these Data consist of forecasts, estimates or assumptions made on a best-

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


201

Scalability of Comparative Analysis, Novel Algorithms and Tools (MICW - Metagenomics Informatics Challenges Workshop: 10K Genomes at a Time)  

Science Conference Proceedings (OSTI)

DOE JGI's Kostas Mavrommatis, chair of the Scalability of Comparative Analysis, Novel Algorithms and Tools panel, at the Metagenomics Informatics Challenges Workshop held at the DOE JGI on October 12-13, 2011.

Mavrommatis, Kostas [JGI

2011-10-12T23:59:59.000Z

202

Advanced development of a pressurized ash agglomerating fluidized-bed coal gasification system: Topical report, Process analysis, FY 1983  

Science Conference Proceedings (OSTI)

KRW Energy Systems, Inc., is engaged in the continuing development of a pressurized, fluidized-bed gasification process at its Waltz Mill Site in Madison, Pennsylvania. The overall objective of the program is to demonstrate the viability of the KRW process for the environmentally-acceptable production of low- and medium-Btu fuel gas from a variety of fossilized carbonaceous feedstocks and industrial fuels. This report presents process analysis of the 24 ton-per-day Process Development Unit (PDU) operations and is a continuation of the process analysis work performed in 1980 and 1981. Included is work performed on PDU process data; gasification; char-ash separation; ash agglomeration; fines carryover, recycle, and consumption; deposit formation; materials; and environmental, health, and safety issues. 63 figs., 43 tabs.

None

1987-07-31T23:59:59.000Z

203

Evaluation of tools for renewable energy policy analysis: The renewable energy penetration model  

Science Conference Proceedings (OSTI)

The Energy Policy Act of 1992 establishes a program to support development of renewable energy technologies including a production incentive to public power utilities. Because there is a wide range of possible policy actions that could be taken to increase electric market share for renewables, modeling tools are needed to help make informed decisions regarding future policy. Previous energy modeling tools did not contain the regional or infrastructure focus necessary to examine renewable technologies. As a result, the Department of Energy Office of Utility Technologies (OUT) supported the development of tools for renewable energy policy analysis. Three models were developed: The Renewable Energy Penetration (REP) model, which is a spreadsheet model for determining first-order estimates of policy effects for each of the ten federal regions; the Ten Federal Region Model (TFRM), which employs utility capacity expansion and dispatching decisions; and the Regional Electric Policy Analysis Model (REPAM) which was constructed to allow detailed insight into interactions between policy and technology within an individual region. In 1993, the OUT supported the Oak Ridge Institute of Science and Education (ORISE) to form an expert panel to provide an independent review of the REP model and TFRM. This report contains the panel`s evaluation of the REP model; the TFRM is evaluated in a companion report. The panel did not review the REPAM. The panel met for a second time in January 1994 to discuss model simulations and deliberate regarding evaluation outcomes. This report is largely a result of this second meeting. The remainder of this chapter provides a description of the REP model and summarizes the panel`s findings. Individual chapters examine various aspects of the model: demand and load, capacity expansion, dispatching and production costing, reliability, renewables, storage, transmission, financial and regulatory concerns, and environmental effects.

Engle, J.

1994-04-01T23:59:59.000Z

204

Economic analysis of low-pressure natural-gas-vehicle storage technology. Task 3 topical report, March 1989-April 1990  

SciTech Connect

The economic analysis concludes that, under the assumptions of the base case, a low pressure adsorbed natural gas (ANG) system for vehicle fuel storage is a viable and competitive alternative to compressed natural gas (CNG) storage systems. ANG systems offer the ability to reduce compressor capital and operating costs, and eliminate costs associated with periodic recertification of CNG storage cylinders. The only cost element to realize and increase due to ANG is the vehicle fuel storage apparatus. Specifically, the cost for purchasing adsorbent carbon becomes the most significant additional expenditure.

Biederman, R.T.; Blazek, C.F.

1990-04-01T23:59:59.000Z

205

Analysis and thermal-design improvements of downhole tools for use in hot-dry wells  

DOE Green Energy (OSTI)

Design improvements made for downhole thermal protection of systems based on results obtained from the analysis of the electronics, heat sink, and dewar packaged in a steel tubular body are described. Results include heat flux at the tool surface, temperature-time histories of each subsystem and isotherm contour plots during the simulation. The analysis showed that the thermal potential between the electronics and the heat sink was in the wrong direction and also was too small to remove heat entering the electronics section. Also, the conductance of the available heat transfer paths from electronics to heat sink was too small to remove that heat efficiently. Significant improvements in survival at high temperatures were achieved by increasing the available thermal capacity of the heat sink, increasing the thermal potential between the heat sink and electronics, and vastly increasing the conductance of the heat transfer paths.

Bennett, G.A.; Sherman, G.R.

1983-02-01T23:59:59.000Z

206

Tribal Topic Group Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

* Email information on Indian 101 course to Tribal Topic Group * Government panel at future TEC on impacts of broader hazmat transportation spectrum * Set up next conference...

207

Topic: Service Life Prediction  

Science Conference Proceedings (OSTI)

Topic: Service Life Prediction. Event. 24th NIST Computer Modeling Workshop. ... Service Life Prediction of Polymeric Materials: Vision for the Future. ...

2012-09-19T23:59:59.000Z

208

A finite element analysis modeling tool for solid oxide fuel cell development: coupled electrochemistry, thermal and flow analysis in MARC®  

Science Conference Proceedings (OSTI)

A 3D simulation tool for modeling solid oxide fuel cells is described. The tool combines the versatility and efficiency of a commercial finite element analysis code, MARC{reg_sign}, with an in-house developed robust and flexible electrochemical (EC) module. Based upon characteristic parameters obtained experimentally and assigned by the user, the EC module calculates the current density distribution, heat generation, and fuel and oxidant species concentration, taking the temperature profile provided by MARC{reg_sign} and operating conditions such as the fuel and oxidant flow rate and the total stack output voltage or current as the input. MARC{reg_sign} performs flow and thermal analyses based on the initial and boundary thermal and flow conditions and the heat generation calculated by the EC module. The main coupling between MARC{reg_sign} and EC is for MARC{reg_sign} to supply the temperature field to EC and for EC to give the heat generation profile to MARC{reg_sign}. The loosely coupled, iterative scheme is advantageous in terms of memory requirement, numerical stability and computational efficiency. The coupling is iterated to self-consistency for a steady-state solution. Sample results for steady states as well as the startup process for stacks with different flow designs are presented to illustrate the modeling capability and numerical performance characteristic of the simulation tool.

Khaleel, Mohammad A.; Lin, Zijing; Singh, Prabhakar; Surdoval, Wayne; Collin, D

2004-05-03T23:59:59.000Z

209

An Analysis of Energy Savings Possible Through Advances in Automotive Tooling Technology  

SciTech Connect

The use of lightweight and highly formable advanced materials in automobile and truck manufacturing has the potential to save fuel. Advances in tooling technology would promote the use of these materials. This report describes an energy savings analysis performed to approximate the potential fuel savings and consequential carbon-emission reductions that would be possible because of advances in tooling in the manufacturing of, in particular, non-powertrain components of passenger cars and heavy trucks. Separate energy analyses are performed for cars and heavy trucks. Heavy trucks are considered to be Class 7 and 8 trucks (trucks rated over 26,000 lbs gross vehicle weight). A critical input to the analysis is a set of estimates of the percentage reductions in weight and drag that could be achieved by the implementation of advanced materials, as a consequence of improved tooling technology, which were obtained by surveying tooling industry experts who attended a DOE Workshop, Tooling Technology for Low-Volume Vehicle Production, held in Seattle and Detroit in October and November 2003. The analysis is also based on 2001 fuel consumption totals and on energy-audit component proportions of fuel use due to drag, rolling resistance, and braking. The consumption proportions are assumed constant over time, but an allowance is made for fleet growth. The savings for a particular component is then the product of total fuel consumption, the percentage reduction of the component, and the energy audit component proportion. Fuel savings estimates for trucks also account for weight-limited versus volume-limited operations. Energy savings are assumed to be of two types: (1) direct energy savings incurred through reduced forces that must be overcome to move the vehicle or to slow it down in braking. and (2) indirect energy savings through reductions in the required engine power, the production and transmission of which incur thermodynamic losses, internal friction, and other inefficiencies. Total savings for an energy use component are estimated by scaling up the direct savings with an approximate total-to-direct savings ratio. Market penetration for new technology vehicles is estimated from projections about scrappage. Retrofit savings are assumed negligible, but savings are also assumed to accrue with increases in the fleet size, based on economic growth forecasts. It is assumed that as vehicles in the current fleet are scrapped, they are replaced with advanced-technology vehicles. Saving estimates are based on proportions of new vehicles, rather than new-vehicle mileages. In practice, of course, scrapped vehicles are often replaced with used vehicles, and used vehicles are replaced with new vehicles. Because new vehicles are typically driven more than old, savings estimates based on count rather than mileage proportions tend to be biased down (i.e., conservative). Savings are expressed in terms of gallons of fuel saved, metric tons of CO2 emissions reductions, and percentages relative to 2001 levels of fuel and CO2. The sensitivity of the savings projections to inputs such as energy-audit proportions of fuel consumed for rolling resistance, drag, braking, etc. is assessed by considering different scenarios. Though based on many approximations, the estimates approximate the potential energy savings possible because of improvements in tooling. For heavy trucks, annual diesel savings of 2.4-6.8 percent, and cumulative savings on the order of 54-154 percent, of 2001 consumption could accrue by 2050. By 2050, annual gasoline savings of 2.8-12 percent, and cumulative savings on the order of 83-350 percent of 2001 consumption could accrue for cars.

Rick Schmoyer, RLS

2004-12-03T23:59:59.000Z

210

UNDP-Energy Costing Tool | Open Energy Information  

Open Energy Info (EERE)

UNDP-Energy Costing Tool UNDP-Energy Costing Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: UNDP Energy Costing Tool Agency/Company /Organization: United Nations Development Programme Sector: Energy Topics: Pathways analysis, Resource assessment Resource Type: Software/modeling tools User Interface: Spreadsheet Website: www.undp.org/energy/mdg-serv.htm Cost: Free Equivalent URI: cleanenergysolutions.org/content/energy-costing-tool Language: English References: UNDP MDG Support Services [1] The Energy Costing Tool is an Excel-based model designed to help countries estimate the costs of increasing access to energy services to support the achievement of the UN Millennium Development Goals (MGD). More information is available on the Energy

211

The Use Of Computational Human Performance Modeling As Task Analysis Tool  

SciTech Connect

During a review of the Advanced Test Reactor safety basis at the Idaho National Laboratory, human factors engineers identified ergonomic and human reliability risks involving the inadvertent exposure of a fuel element to the air during manual fuel movement and inspection in the canal. There were clear indications that these risks increased the probability of human error and possible severe physical outcomes to the operator. In response to this concern, a detailed study was conducted to determine the probability of the inadvertent exposure of a fuel element. Due to practical and safety constraints, the task network analysis technique was employed to study the work procedures at the canal. Discrete-event simulation software was used to model the entire procedure as well as the salient physical attributes of the task environment, such as distances walked, the effect of dropped tools, the effect of hazardous body postures, and physical exertion due to strenuous tool handling. The model also allowed analysis of the effect of cognitive processes such as visual perception demands, auditory information and verbal communication. The model made it possible to obtain reliable predictions of operator performance and workload estimates. It was also found that operator workload as well as the probability of human error in the fuel inspection and transfer task were influenced by the concurrent nature of certain phases of the task and the associated demand on cognitive and physical resources. More importantly, it was possible to determine with reasonable accuracy the stages as well as physical locations in the fuel handling task where operators would be most at risk of losing their balance and falling into the canal. The model also provided sufficient information for a human reliability analysis that indicated that the postulated fuel exposure accident was less than credible.

Jacuqes Hugo; David Gertman

2012-07-01T23:59:59.000Z

212

Water Energy Load Profiling (WELP) Tool | Open Energy Information  

Open Energy Info (EERE)

Water Energy Load Profiling (WELP) Tool Water Energy Load Profiling (WELP) Tool Jump to: navigation, search Tool Summary Name: Water Energy Load Profiling (WELP) Tool Agency/Company /Organization: California Public Utilities Commission (CPUC) Sector: Energy, Water Focus Area: Energy Efficiency, - Embodied Energy, Water Conservation Phase: Determine Baseline, "Evaluate Effectiveness and Revise" is not in the list of possible values (Bring the Right People Together, Create a Vision, Determine Baseline, Evaluate Options, Develop Goals, Prepare a Plan, Get Feedback, Develop Finance and Implement Projects, Create Early Successes, Evaluate Effectiveness and Revise as Needed) for this property. Topics: GHG inventory, Policies/deployment programs, Resource assessment, Background analysis

213

A Tool for the Analysis of Real Options in Sustainability Improvement Projects  

E-Print Network (OSTI)

The major challenges in sustainable implementation are the financial issue and uncertainties. The traditional financial budgeting approach that is commonly used to evaluate sustainable projects normally neglects future decisions that might need to be made over the course of a project. The real options approach has been suggested as a tool for strategic decision making because it can provide flexibility which can increase the project value. Researchers have been trying to identify the potential of the real options approach, and provide the frameworks for a real options evaluation and flexible strategy in sustainability improvement. However, some important variables and financial impacts explanation of real options are missing. Models can be improved to show the variation of possible project values along with its behavior. This work aims to improve the real options model in sustainable projects to provide understanding about the financial impacts of flexible strategy to sustainable improvement projects and to be used as a tool to assist decision making. The results showed that real options can have a positive financial impact to the project. The extension of this model can assist the analysis and development of decision policies.

Boonchanta, Napon

2012-08-01T23:59:59.000Z

214

Building Energy Software Tools Directory: Tools by Subjects  

NLE Websites -- All DOE Office Websites (Extended Search)

SolarClimate Analysis Training Utility Evaluation Validation Tools VentilationAirflow Water Conservation Miscellaneous Applications Tools Listed Alphabetically Tools by...

215

Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT)  

Science Conference Proceedings (OSTI)

This report summarizes work carried out by the Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT) Team for the period of January 1, 2011 through June 30, 2011. It discusses highlights, overall progress, period goals, and collaborations and lists papers and presentations. To learn more about our project, please visit our UV-CDAT website (URL: http://uv-cdat.org). This report will be forwarded to the program manager for the Department of Energy (DOE) Office of Biological and Environmental Research (BER), national and international collaborators and stakeholders, and to researchers working on a wide range of other climate model, reanalysis, and observation evaluation activities. The UV-CDAT executive committee consists of Dean N. Williams of Lawrence Livermore National Laboratory (LLNL); Dave Bader and Galen Shipman of Oak Ridge National Laboratory (ORNL); Phil Jones and James Ahrens of Los Alamos National Laboratory (LANL), Claudio Silva of Polytechnic Institute of New York University (NYU-Poly); and Berk Geveci of Kitware, Inc. The UV-CDAT team consists of researchers and scientists with diverse domain knowledge whose home institutions also include the National Aeronautics and Space Administration (NASA) and the University of Utah. All work is accomplished under DOE open-source guidelines and in close collaboration with the project's stakeholders, domain researchers, and scientists. Working directly with BER climate science analysis projects, this consortium will develop and deploy data and computational resources useful to a wide variety of stakeholders, including scientists, policymakers, and the general public. Members of this consortium already collaborate with other institutions and universities in researching data discovery, management, visualization, workflow analysis, and provenance. The UV-CDAT team will address the following high-level visualization requirements: (1) Alternative parallel streaming statistics and analysis pipelines - Data parallelism, Task parallelism, Visualization parallelism; (2) Optimized parallel input/output (I/O); (3) Remote interactive execution; (4) Advanced intercomparison visualization; (5) Data provenance processing and capture; and (6) Interfaces for scientists - Workflow data analysis and visualization construction tools, and Visualization interfaces.

Williams, D N

2011-07-20T23:59:59.000Z

216

West African Clean Energy Gateway-Software Analysis Tools | Open Energy  

Open Energy Info (EERE)

source source History View New Pages Recent Changes All Special Pages Semantic Search/Querying Get Involved Help Apps Datasets Community Login | Sign Up Search Page Edit History Facebook icon Twitter icon » West African Clean Energy Gateway-Software Analysis Tools Jump to: navigation, search Economic Community of West African States (ECOWAS) Clean Energy Gateway Home | About | News | Links | Help | Countries Benin | Burkina Faso | Cape Verde | Gambia | Ghana | Guinea| Guinea-Bissau | Ivory Coast | Liberia | Mali | Niger | Nigeria | Senegal | Sierra Leone | Togo Countries ECREEE light.JPG FBenin.png FBurkinaFaso.png FCapeVerde.png FGambia.png FGhana.png FGuinea.png FGuinea-Bissau.png Benin Burkina Faso Cape Verde Gambia Ghana Guinea Guinea-Bissau FIvoryCoast.png FLiberia.png FMali.png FNiger.png FNigeria.png FSenegal.png FSierraLeone.png FTogo.png

217

Aiding Air Force budget analysis with expert system tools and techniques  

SciTech Connect

A system to capture US Air Force financial expertise is currently under development. To accomplish its mission of costing Air Force programs, the Director of the Budget utilizes the services of budget analysts. Analysts are required to prepare three cost exercises during the year: the Program Objective Memorandum (POM), the Budget Estimation Submission (BES), and the President's Budget (PB). Additionally, during budget calls and budget execution, analysts must make decisions regarding funding obligations and outlays. Analysis and modification of outlay projection plans require the use of operational and procedural heuristics. These problem-solving steps followed by analysts are being used to develop a prototype. Information regarding the prototype, the tool, and its capabilities are presented. Additional features of the program are described including integration with existing information management systems.

Hardee, H.K.; Jones, K.A.; Morris, J.D.; Emrich, M.L.; Ali, H.

1987-09-14T23:59:59.000Z

218

Developmental of a Vapor Cloud Explosion Risk Analysis Tool Using Exceedance Methodology  

E-Print Network (OSTI)

In development projects, designers should take into consideration the possibility of a vapor cloud explosion in the siting and design of a process plant from day one. The most important decisions pertinent to the location of different process areas, separation between different areas, location of occupied buildings and overall layout may be made at the conceptual stage of the project. During the detailed design engineering stage the final calculation of gas explosion loads is an important activity. However, decisions related to the layout and location of occupied buildings at this stage could be very costly. Therefore, at the conceptual phase of the development project for a hydrocarbon facility, it would be helpful to get a picture of possible vapor cloud explosion loads to be used in studying various options. This thesis presents the analytical parameters that are used in vapor cloud explosion risk analysis. It proposes a model structure for the analysis of vapor cloud explosion risks to buildings based on exceedance methodology. This methodology was developed in a computer program which is used to support this thesis. The proposed model considers all possible gas release scenarios through the use of the Monte Carlo simulation. The risk of vapor cloud explosions can be displayed using exceedance curves. The resulting model provides a predictive tool for vapor cloud explosion problems at the early stages of development projects, particularly in siting occupied buildings in onshore hydrocarbon facilities. It can also be used as a quick analytical tool for investigating various aspects of vapor cloud explosions. This model has been applied to a case study, a debutanizer process unit. The model was used to explore the different alternatives of locating a building near the facility. The results from the model were compared to the results of other existing software to determine the model validity. The results show that the model can effectively examine the risk of vapor cloud explosions.

Alghamdi, Salem

2011-08-01T23:59:59.000Z

219

Review and comparison of web- and disk-based tools for residential energy analysis  

E-Print Network (OSTI)

utilities version of tool and test home's zip code • Initialto Bryan Texas Utilities. Set zip code to actual zip when

Mills, Evan

2002-01-01T23:59:59.000Z

220

General Topics in Failure Analysis  

Science Conference Proceedings (OSTI)

Oct 19, 2011 ... Program Organizers: Andrew Spowage, The University of Nottingham, Malaysia Campus; Tom Ackerson, IMR Metallurgical Services; Larry ...

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


221

Building Energy Software Tools Directory: Weather Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

result is a comprehensive pre-design climatesite analysis tool. Screen Shots Keywords weather data visualization, psychrometry, passive design analysis, optimum orientiation,...

222

Topic Group Participants  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Topic Group Report Topic Group Report Presented to: Transportation External Coordination Working Group April 5, 2005 Phoenix, Arizona Recent 180(c) Topic Group Activities Issue Papers 1. Funding Distribution Method 2. Allowable Activities 3. Definitions 4. Pass-Through Requirements 5. Contingency Plans 6. 180(c) Policy or Rulemaking 7. Timing and Eligibility* 8. Funding for Related Activities* 9. State Fees* 10. Funding Allocation Approach* 180(c) Policy & Procedures * Executive Summary * Draft Policy & Procedures * Draft Grant Application Pckg * Appendix *Papers 7-10 still under discussion Today's Discussion Items * Reviewed Topic Group member comments on a variety of issues * Key issues included: - Funding allocation and timing of grants - Planning grants - State fees/matching requirements - Related non-training activities

223

Tracking topic birth and death in LDA.  

SciTech Connect

Most topic modeling algorithms that address the evolution of documents over time use the same number of topics at all times. This obscures the common occurrence in the data where new subjects arise and old ones diminish or disappear entirely. We propose an algorithm to model the birth and death of topics within an LDA-like framework. The user selects an initial number of topics, after which new topics are created and retired without further supervision. Our approach also accommodates many of the acceleration and parallelization schemes developed in recent years for standard LDA. In recent years, topic modeling algorithms such as latent semantic analysis (LSA)[17], latent Dirichlet allocation (LDA)[10] and their descendants have offered a powerful way to explore and interrogate corpora far too large for any human to grasp without assistance. Using such algorithms we are able to search for similar documents, model and track the volume of topics over time, search for correlated topics or model them with a hierarchy. Most of these algorithms are intended for use with static corpora where the number of documents and the size of the vocabulary are known in advance. Moreover, almost all current topic modeling algorithms fix the number of topics as one of the input parameters and keep it fixed across the entire corpus. While this is appropriate for static corpora, it becomes a serious handicap when analyzing time-varying data sets where topics come and go as a matter of course. This is doubly true for online algorithms that may not have the option of revising earlier results in light of new data. To be sure, these algorithms will account for changing data one way or another, but without the ability to adapt to structural changes such as entirely new topics they may do so in counterintuitive ways.

Wilson, Andrew T.; Robinson, David Gerald

2011-09-01T23:59:59.000Z

224

Topic: High Performance Buildings  

Science Conference Proceedings (OSTI)

... Emergencies, Give Your Power Generator Some ... Tool Helps Evaluate Natural Cooling Options ... Greenhouse Gas Emissions and Transport Project. ...

2012-09-19T23:59:59.000Z

225

UNEP-Bioenergy Decision Support Tool | Open Energy Information  

Open Energy Info (EERE)

UNEP-Bioenergy Decision Support Tool UNEP-Bioenergy Decision Support Tool Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: UNEP-Bioenergy Decision Support Tool Agency/Company /Organization: United Nations Environment Programme (UNEP) Partner: Food and Agriculture Organization of the United Nations Sector: Land Focus Area: Renewable Energy, Biomass, - Biofuels, - Biomass Combustion, - Biomass Gasification, - Biomass Pyrolysis, - Landfill Gas, People and Policy Topics: Co-benefits assessment, - Energy Access, - Energy Security, - Environmental and Biodiversity, - Health, Implementation, Market analysis, Policies/deployment programs Resource Type: Guide/manual, Publications

226

NREL: Dynamic Maps, GIS Data, and Analysis Tools - Data Visualization &  

NLE Websites -- All DOE Office Websites (Extended Search)

MapSearch Searching for maps has never been easier. A screen capture of the MapSearch Map view option Bookmark and Share Data Visualization & Geospatial Tools NREL's Geographic Information System (GIS) Team has developed tools that allow users to apply these data. These tools help determine things such as how much electricity can be produced from solar systems on a house or what renewable resources are available in a specific areas. Please visit http://maps.nrel.gov/ for the most current list of available NREL's GIS tools. If you have difficulty using these tools because of a disability, please contact the Webmaster. General Interactive Mapping Tools Access RE Atlas, Solar Power Prospector, PVWatts, and other popular tools that dynamically generate maps of renewable energy resources.

227

UNIRIB: Physics Topics  

NLE Websites -- All DOE Office Websites (Extended Search)

Physics Topics Physics Topics Research Capitalizing on the strengths of nine collaborating research universities and the world-class equipment available at the Holifield Radioactive Ion Beam Facility (HRIBF) at Oak Ridge National Laboratory (ORNL), the University Radioactive Ion Beam (UNIRIB) consortium is conducting research at the forefront of nuclear physics. UNIRIB, a division of the Oak Ridge Institute for Science and Education (ORISE), brings together researchers from around the world to study the short-lived, exotic nuclei that are involved in astrophysical processes. UNIRIB researchers participate in many of the nuclear physics experiments carried out at HRIBF. UNIRIB researchers are presently leading the following physics topics. To view these files, you will need the Adobe Reader, which is available free

228

Security Topic Group  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Group Group Security and TEC * Tension exists between open forum concept of TEC and the ability of STG members to discuss security topics. - DOE will maintain the open forum - it will not form a subgroup of cleared members NAS Study * Some members want STG to formally recommend a fully independent review of security issues - DOE is reviewing the NAS study and has not formulated a position Security Topic Group (Continued) Classification Guide & Information Sharing Protocol * Guide is finished and undergoing internal concurrence - Slated for late September release * Protocol will be completed once the guide is issued Security-Related Lessons Learned * Lessons learned document was distributed and comments requested by the end of March Security Topic Group (Continued) SRG/CVSA Survey

229

Independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool  

SciTech Connect

MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor nuclear power plants, and is being developed for the US Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL). Brookhaven National Laboratory (BNL) has a program with the NRC called ``MELCOR Verification, Benchmarking, and Applications,`` whose aim is to provide independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool. The scope of this program is to perform quality control verification on all released versions of MELCOR, to benchmark MELCOR against more mechanistic codes and experimental data from severe fuel damage tests, and to evaluate the ability of MELCOR to simulate long-term severe accident transients in commercial LWRs, by applying the code to model both BWRs and PWRs. Under this program, BNL provided input to the NRC-sponsored MELCOR Peer Review, and is currently contributing to the MELCOR Cooperative Assessment Program (MCAP). This paper presents a summary of MELCOR assessment efforts at BNL and their contribution to NRC goals with respect to MELCOR.

Madni, I.K. [Brookhaven National Lab., Upton, NY (United States); Eltawila, F. [Nuclear Regulatory Commission, Washington, DC (United States)

1994-01-01T23:59:59.000Z

230

Topics in Modern Physics Sampler  

NLE Websites -- All DOE Office Websites (Extended Search)

Topics in Modern Physics Teacher Resource Book Sampler Ed Home - Sampler Index Download the revised Topics in Modern Physics Teacher Resource Book. This volume contains some but...

231

A life cycle cost analysis framework for geologic storage of hydrogen : a user's tool.  

DOE Green Energy (OSTI)

The U.S. Department of Energy (DOE) has an interest in large scale hydrogen geostorage, which could offer substantial buffer capacity to meet possible disruptions in supply or changing seasonal demands. The geostorage site options being considered are salt caverns, depleted oil/gas reservoirs, aquifers and hard rock caverns. The DOE has an interest in assessing the geological, geomechanical and economic viability for these types of geologic hydrogen storage options. This study has developed an economic analysis methodology and subsequent spreadsheet analysis to address costs entailed in developing and operating an underground geologic storage facility. This year the tool was updated specifically to (1) incorporate more site-specific model input assumptions for the wells and storage site modules, (2) develop a version that matches the general format of the HDSAM model developed and maintained by Argonne National Laboratory, and (3) incorporate specific demand scenarios illustrating the model's capability. Four general types of underground storage were analyzed: salt caverns, depleted oil/gas reservoirs, aquifers, and hard rock caverns/other custom sites. Due to the substantial lessons learned from the geological storage of natural gas already employed, these options present a potentially sizable storage option. Understanding and including these various geologic storage types in the analysis physical and economic framework will help identify what geologic option would be best suited for the storage of hydrogen. It is important to note, however, that existing natural gas options may not translate to a hydrogen system where substantial engineering obstacles may be encountered. There are only three locations worldwide that currently store hydrogen underground and they are all in salt caverns. Two locations are in the U.S. (Texas), and are managed by ConocoPhillips and Praxair (Leighty, 2007). The third is in Teeside, U.K., managed by Sabic Petrochemicals (Crotogino et al., 2008; Panfilov et al., 2006). These existing H{sub 2} facilities are quite small by natural gas storage standards. The second stage of the analysis involved providing ANL with estimated geostorage costs of hydrogen within salt caverns for various market penetrations for four representative cities (Houston, Detroit, Pittsburgh and Los Angeles). Using these demand levels, the scale and cost of hydrogen storage necessary to meet 10%, 25% and 100% of vehicle summer demands was calculated.

Kobos, Peter Holmes; Lord, Anna Snider; Borns, David James; Klise, Geoffrey T.

2011-09-01T23:59:59.000Z

232

SU?GG?T?509: Development of a Database and Software Tools for Outcome Analysis of Breast Cancer Radiotherapy  

Science Conference Proceedings (OSTI)

Purpose:Dose?volume response data for breast cancerradiotherapy (RT) are generally lacking. The purpose of this work is to develop a database and software tools to facilitate the analyses of short? and long?term radiationdose?volume responses of breast cancer RT. Method and Materials: As a part of the project aiming to develop the Research Analysis Platform and IGRTDatabases (RAPID)

P Prior; G Chen; X Li

2010-01-01T23:59:59.000Z

233

Regulatory cross-cutting topics for fuel cycle facilities.  

SciTech Connect

This report overviews crosscutting regulatory topics for nuclear fuel cycle facilities for use in the Fuel Cycle Research&Development Nuclear Fuel Cycle Evaluation and Screening study. In particular, the regulatory infrastructure and analysis capability is assessed for the following topical areas:Fire Regulations (i.e., how applicable are current Nuclear Regulatory Commission (NRC) and/or International Atomic Energy Agency (IAEA) fire regulations to advance fuel cycle facilities)Consequence Assessment (i.e., how applicable are current radionuclide transportation tools to support risk-informed regulations and Level 2 and/or 3 PRA) While not addressed in detail, the following regulatory topic is also discussed:Integrated Security, Safeguard and Safety Requirement (i.e., how applicable are current Nuclear Regulatory Commission (NRC) regulations to future fuel cycle facilities which will likely be required to balance the sometimes conflicting Material Accountability, Security, and Safety requirements.)

Denman, Matthew R.; Brown, Jason; Goldmann, Andrew Scott; Louie, David

2013-10-01T23:59:59.000Z

234

Review and comparison of web- and disk-based tools for residentialenergy analysis  

SciTech Connect

There exist hundreds of building energy software tools, both web- and disk-based. These tools exhibit considerable range in approach and creativity, with some being highly specialized and others able to consider the building as a whole. However, users are faced with a dizzying array of choices and, often, conflicting results. The fragmentation of development and deployment efforts has hampered tool quality and market penetration. The purpose of this review is to provide information for defining the desired characteristics of residential energy tools, and to encourage future tool development that improves on current practice. This project entails (1) creating a framework for describing possible technical and functional characteristics of such tools, (2) mapping existing tools onto this framework, (3) exploring issues of tool accuracy, and (4) identifying ''best practice'' and strategic opportunities for tool design. evaluated 50 web-based residential calculators, 21 of which we regard as ''whole-house'' tools(i.e., covering a range of end uses). Of the whole-house tools, 13 provide open-ended energy calculations, 5 normalize the results to actual costs (a.k.a ''bill-disaggregation tools''), and 3 provide both options. Across the whole-house tools, we found a range of 5 to 58 house-descriptive features (out of 68 identified in our framework) and 2 to 41 analytical and decision-support features (55 possible). We also evaluated 15 disk-based residential calculators, six of which are whole-house tools. Of these tools, 11 provide open-ended calculations, 1 normalizes the results to actual costs, and 3 provide both options. These tools offered ranges of 18 to 58 technical features (70 possible) and 10 to 40 user- and decision-support features (56 possible). The comparison shows that such tools can employ many approaches and levels of detail. Some tools require a relatively small number of well-considered inputs while others ask a myriad of questions and still miss key issues. The value of detail has a lot to do with the type of question(s) being asked by the user (e.g., the availability of dozens of miscellaneous appliances is immaterial for a user attempting to evaluate the potential for space-heating savings by installing a new furnace). More detail does not, according to our evaluation, automatically translate into a ''better'' or ''more accurate'' tool. Efforts to quantify and compare the ''accuracy'' of these tools are difficult at best, and prior tool-comparison studies have not undertaken this in a meaningful way. The ability to evaluate accuracy is inherently limited by the availability of measured data. Furthermore, certain tool outputs can only be measured against ''actual'' values that are themselves calculated (e.g., HVAC sizing), while others are rarely if ever available (e.g., measured energy use or savings for specific measures). Similarly challenging is to understand the sources of inaccuracies. There are many ways in which quantitative errors can occur in tools, ranging from programming errors to problems inherent in a tool's design. Due to hidden assumptions and non-variable ''defaults'', most tools cannot be fully tested across the desirable range of building configurations, operating conditions, weather locations, etc. Many factors conspire to confound performance comparisons among tools. Differences in inputs can range from weather city, to types of HVAC systems, to appliance characteristics, to occupant-driven effects such as thermostat management. Differences in results would thus no doubt emerge from an extensive comparative exercise, but the sources or implications of these differences for the purposes of accuracy evaluation or tool development would remain largely unidentifiable (especially given the paucity of technical documentation available for most tools). For the tools that we tested, the predicted energy bills for a single test building ranged widely (by nearly a factor of three), and far more so at the end-use level. Most tools over-predicted energy bills and all over-predicted consumption. Var

Mills, Evan

2002-08-25T23:59:59.000Z

235

Detecting research topics via the correlation between graphs and texts  

Science Conference Proceedings (OSTI)

In this paper we address the problem of detecting topics in large-scale linked document collections. Recently, topic detection has become a very active area of research due to its utility for information navigation, trend analysis, and high-level description ... Keywords: citation graphs, correlation of text and links, graph mining, probabilistic measure, topic detection

Yookyung Jo; Carl Lagoze; C. Lee Giles

2007-08-01T23:59:59.000Z

236

ANALYSIS TOOLS FOR SIZING AND PLACEMENT OF ENERGY STORAGE IN GRID APPLICATIONS  

Science Conference Proceedings (OSTI)

The purpose of this report was to review pertinent literature and studies to identify current state-of-the-art models and analytical tools that optimize the siting, sizing, and economic value of energy storage in a smart grid infrastructure. In recent decades, research and development has significantly improved the cost and reliability of energy storage systems. However, a relatively small percentage of that work has focused on engineering tools for integrating energy storage into existing or future electric grids. This literature review revealed that only a small number of software tools exist, and that those tools only partially address the needs for placement, sizing, and overall control strategies of stationary energy storage within a smart grid infrastructure. None of the tools comprehensively captures the benefits of energy storage, which would reveal all of the potential values. None of the tools or models provides optimization features that identify optimal placement and sizing options within a transmission or distribution system context. This review identifies a need for tool development to fill the gap in the grid analytics and provides some recommendations of guiding principles for advancing the analytical capabilities needed for the engineering and grid planning communities.

Hoffman, Michael G.; Kintner-Meyer, Michael CW; DeSteese, John G.; Sadovsky, Artyom

2011-10-06T23:59:59.000Z

237

ADB-Methods and Tools for Energy Demand Projection | Open Energy  

Open Energy Info (EERE)

ADB-Methods and Tools for Energy Demand Projection ADB-Methods and Tools for Energy Demand Projection Jump to: navigation, search Tool Summary Name: Methods and Tools for Energy Demand Projection Agency/Company /Organization: Asian Development Bank Sector: Energy Topics: Pathways analysis Resource Type: Presentation, Software/modeling tools Website: cdm-mongolia.com/files/2_Methods_Hoseok_16May2010.pdf Cost: Free Methods and Tools for Energy Demand Projection Screenshot References: Methods and Tools for Energy Demand Projection[1] This article is a stub. You can help OpenEI by expanding it. References ↑ "Methods and Tools for Energy Demand Projection" Retrieved from "http://en.openei.org/w/index.php?title=ADB-Methods_and_Tools_for_Energy_Demand_Projection&oldid=398945" Categories:

238

Interconnection-Wide Transmission Planning Initiative: Topic A,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning A description of the requirements for Topic A for all Interconnections under the Interconnection-Wide Transmission Planning Initiative, part of the American Recovery and Reinvestment Act. Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning More Documents & Publications Microsoft Word - yDE-FOA-0000068.rtf Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Eastern Interconnection on Electric Resource Planning and Priorities Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation

239

Building Energy Software Tools Directory: New Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Energy Auditing & Sales Tool, home energy assessments, energy analysis, home performance, residential retrofits 2013-05-17 MyVerdafero Utility Optimization, building performance,...

240

NREL: Dynamic Maps, GIS Data, and Analysis Tools - MapSearch  

NLE Websites -- All DOE Office Websites (Extended Search)

Bookmark and Share Bookmark and Share MapSearch MapSearch Logo is a computer monitor with a magnifying glass suspended in the air before it. Use our MapSearch to easily search our collection of maps created by the Geographic Information System (GIS) team. Please use the search box and the filters on the left and right of the screen to limit results. Notice: The current tool works best in Firefox and may result in errors if opened using Microsoft Internet Explorer. June 2013 - The NREL GIS team has released a new beta version of the Mapsearch tool. This new beta version should eliminate some of the browser issues experienced with the current tool. The beta version is designed to work with NREL's OpenEI so users will have one site to search and view NREL created maps. If you have any feeback or comments on this new beta site, contact the Webmaster. While testing is done on this new beta version, the current MapSearch tool is still available. The following instructions apply to the current tool. launch

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


241

Cost Benefit Analysis Modeling Tool for Electric vs. ICE Airport Ground Support Equipment – Development and Results  

SciTech Connect

This report documents efforts to develop a computer tool for modeling the economic payback for comparative airport ground support equipment (GSE) that are propelled by either electric motors or gasoline and diesel engines. The types of GSE modeled are pushback tractors, baggage tractors, and belt loaders. The GSE modeling tool includes an emissions module that estimates the amount of tailpipe emissions saved by replacing internal combustion engine GSE with electric GSE. This report contains modeling assumptions, methodology, a user’s manual, and modeling results. The model was developed based on the operations of two airlines at four United States airports.

James Francfort; Kevin Morrow; Dimitri Hochard

2007-02-01T23:59:59.000Z

242

Geothermal Properties Measurement Tool | Open Energy Information  

Open Energy Info (EERE)

Geothermal Properties Measurement Tool Geothermal Properties Measurement Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Geothermal Properties Measurement Tool Agency/Company /Organization: Oak Ridge National Laboratory Sector: Energy Focus Area: Geothermal Topics: Resource assessment Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.ornl.gov/sci/ees/etsd/btric/ground-source.shtml Cost: Free References: Geothermal Properties Measurement Tool [1] Logo: Geothermal Properties Measurement Tool The Geothermal Properties Measurement tool was developed at Oak Ridge National Laboratory for geothermal heat pump (GHP) designers and installers to better determine the geothermal properties of a certain location. The Geothermal Properties Measurement Excel tool was developed at Oak Ridge

243

Evaluating state markets for residential wind systems: Results from an economic and policy analysis tool  

DOE Green Energy (OSTI)

The market for small wind systems in the United States, often defined as systems less than or equal to 100 kW that produce power on the customer side of the meter, is small but growing steadily. The installed capacity of domestic small wind systems in 2002 was reportedly 15-18 MW, though the market is estimated to be growing by as much as 40 percent annually (AWEA, 2002). This growth is driven in part by recent technology advancements and cost improvements and, perhaps more importantly, by favorable policy incentives targeted at small wind systems that are offered in several states. Currently, over half of all states have incentive policies for which residential small wind installations are eligible. These incentives range from low-interest loan programs and various forms of tax advantages to cash rebates that cover as much as 60 percent of the total system cost for turbines 10 kW or smaller installed in residential applications. Most of these incentives were developed to support a ran ge of emerging renewable technologies (most notably photovoltaic systems), and were therefore not specifically designed with small wind systems in mind. As such, the question remains as to which incentive types provide the greatest benefit to small wind systems, and how states might appropriately set the level and type of incentives in the future. Furthermore, given differences in incentive types and levels across states, as well as variations in retail electricity rates and other relevant factors, it is not immediately obvious which states offer the most promising markets for small wind turbine manufacturers and installers, as well as potential residential system owners. This paper presents results from a Berkeley Lab analysis of the impact of existing and proposed state and federal incentives on the economics of grid-connected, residential small wind systems. Berkeley Lab has designed the Small Wind Analysis Tool (SWAT) to compare system economics under current incentive structures a cross all 50 states. SWAT reports three metrics to characterize residential wind economics in each state and wind resource class: (1) Break-Even Turnkey Cost (BTC): The BTC is defined as the aggregate installed system cost that would balance total customer payments and revenue over the life of the system, allowing the customer to ''break-even'' while earning a specified rate of return on the small wind ''investment.'' (2) Simple Payback (SP): The SP is the number of years it takes a customer to recoup a cash payment for a wind system and all associated costs, assuming zero discount on future revenue and payments (i.e., ignoring the time value of money). (3) Levelized Cost of Energy (LCOE): The LCOE is the levelized cost of generating a kWh of electricity over the lifetime of the system, and is calculated assuming a cash purchase for the small wind system and a 5.5 percent real discount rate. This paper presents SWAT results for a 10 kW wind turbine and turbine power production is based on a Bergey Excel system. These results are not directly applicable to turbines with different power curves and rated outputs, especially given the fact that many state incentives are set as a fixed dollar amount, and the dollar per Watt amount will vary based on the total rated turbine capacity.

Edwards, Jennifer L.; Wiser, Ryan; Bolinger, Mark; Forsyth, Trudy

2004-12-01T23:59:59.000Z

244

IRA-WDS: A GIS-based risk analysis tool for water distribution systems  

Science Conference Proceedings (OSTI)

This paper presents the development of a new software tool IRA-WDS. This GIS-based software predicts the risks associated with contaminated water entering water distribution systems from surrounding foul water bodies such as sewers, drains and ditches. ... Keywords: Contaminant intrusion, Developing countries, GIS, Intermittent water supply, Risk assessment, Tight coupling, Water supply

K. Vairavamoorthy; Jimin Yan; Harshal M. Galgale; Sunil D. Gorantiwar

2007-07-01T23:59:59.000Z

245

Design and Analysis of a Tool for Planning and Simulating Dynamic Vertical Transport  

Science Conference Proceedings (OSTI)

Nowadays, most of the main companies in the vertical transport industry are researching tools capable of providing support for the design process of elevator systems. Numerous decisions have to be taken to obtain an accurate, comfortable, and high-quality ... Keywords: Vertical transport, elevator, lift, simulation

Pablo Cortés; Jesús Muñuzuri; Luis Onieva

2006-04-01T23:59:59.000Z

246

A mobile knowledge management and decision support tool for soil analysis  

Science Conference Proceedings (OSTI)

This paper describes the implementation and evaluation of a mobile knowledge management and decision support system to assist archaeologists in dealing with soils. Our view is that provision of a mobile tool which provides access to expert knowledge ... Keywords: Geoarchaeology, Knowledge management, Mobile decision support

Julie Cowie; David Cairns; Martin Blunn; Clare Wilson; Edward Pollard; Donald Davidson

2009-10-01T23:59:59.000Z

247

Performance Analysis of and Tool Support for Transactional Memory on BG/Q  

SciTech Connect

Martin Schindewolf worked during his internship at the Lawrence Livermore National Laboratory (LLNL) under the guidance of Martin Schulz at the Computer Science Group of the Center for Applied Scientific Computing. We studied the performance of the TM subsystem of BG/Q as well as researched the possibilities for tool support for TM. To study the performance, we run CLOMP-TM. CLOMP-TM is a benchmark designed for the purpose to quantify the overhead of OpenMP and compare different synchronization primitives. To advance CLOMP-TM, we added Message Passing Interface (MPI) routines for a hybrid parallelization. This enables to run multiple MPI tasks, each running OpenMP, on one node. With these enhancements, a beneficial MPI task to OpenMP thread ratio is determined. Further, the synchronization primitives are ranked as a function of the application characteristics. To demonstrate the usefulness of these results, we investigate a real Monte Carlo simulation called Monte Carlo Benchmark (MCB). Applying the lessons learned yields the best task to thread ratio. Further, we were able to tune the synchronization by transactifying the MCB. Further, we develop tools that capture the performance of the TM run time system and present it to the application's developer. The performance of the TM run time system relies on the built-in statistics. These tools use the Blue Gene Performance Monitoring (BGPM) interface to correlate the statistics from the TM run time system with performance counter values. This combination provides detailed insights in the run time behavior of the application and enables to track down the cause of degraded performance. Further, one tool has been implemented that separates the performance counters in three categories: Successful Speculation, Unsuccessful Speculation and No Speculation. All of the tools are crafted around IBM's xlc compiler for C and C++ and have been run and tested on a Q32 early access system.

Schindewolf, M

2011-12-08T23:59:59.000Z

248

Tool for Rapid Assessment of City Energy (TRACE) | Open Energy Information  

Open Energy Info (EERE)

Tool for Rapid Assessment of City Energy (TRACE) Tool for Rapid Assessment of City Energy (TRACE) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Tool for Rapid Assessment of City Energy (TRACE) Agency/Company /Organization: Energy Sector Management Assistance Program of the World Bank Sector: Climate Focus Area: Renewable Energy, Buildings, Energy Efficiency Topics: Low emission development planning, Pathways analysis Resource Type: Training materials, Software/modeling tools User Interface: Website Website: esmap.org/esmap/TRACE Cost: Free Equivalent URI: cleanenergysolutions.org/content/tool-rapid-assessment-city-energy-tra Language: English Policies: Deployment Programs DeploymentPrograms: Technical Assistance References: TRACE[1] This tool offers cities a quick and easy way to assess their energy

249

Topic: Emergency Egress and Access  

Science Conference Proceedings (OSTI)

Topic: Emergency Egress and Access. Fire Research Seminar Series. NIST WTC Recommendations Are Basis for New Set of Revised Codes. ...

2012-08-20T23:59:59.000Z

250

OOTW COST TOOLS  

Science Conference Proceedings (OSTI)

This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

HARTLEY, D.S.III; PACKARD, S.L.

1998-09-01T23:59:59.000Z

251

Development of a Software Design Tool for Hybrid Solar-Geothermal Heat Pump  

Open Energy Info (EERE)

Software Design Tool for Hybrid Solar-Geothermal Heat Pump Software Design Tool for Hybrid Solar-Geothermal Heat Pump Systems in Heating- and Cooling-Dominated Buildings Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Development of a Software Design Tool for Hybrid Solar-Geothermal Heat Pump Systems in Heating- and Cooling-Dominated Buildings Project Type / Topic 1 Recovery Act - Geothermal Technologies Program: Ground Source Heat Pumps Project Type / Topic 2 Topic Area 2: Data Gathering and Analysis Project Description In heating-dominated buildings, the proposed design approach takes advantage of glazed solar collectors to effectively balance the annual thermal loads on the ground with renewable solar energy. In cooling-dominated climates, the design approach takes advantage of relatively low-cost, unglazed solar collectors as the heat rejecting component.

252

Real option analysis as a decision tool in oil field developments  

E-Print Network (OSTI)

This thesis shows the applicability and value of real options analysis in developing an oil field, and how its use along with decision analysis can maximize the returns on a given project and minimize the losses. It focuses ...

Babajide, Abisoye (Abisoye E.)

2007-01-01T23:59:59.000Z

253

Entity-centric topic-oriented opinion summarization in twitter  

Science Conference Proceedings (OSTI)

Microblogging services, such as Twitter, have become popular channels for people to express their opinions towards a broad range of topics. Twitter generates a huge volume of instant messages (i.e. tweets) carrying users' sentiments and attitudes every ... Keywords: #hashtag, Twitter, opinion summarization, sentiment analysis, topic analysis

Xinfan Meng; Furu Wei; Xiaohua Liu; Ming Zhou; Sujian Li; Houfeng Wang

2012-08-01T23:59:59.000Z

254

DeCompactionTool: Software for subsidence analysis including statistical error quantification  

Science Conference Proceedings (OSTI)

Subsidence analysis based on decompaction of the sedimentary record is a standard method for reconstructing the evolution of sedimentary basins. For such an analysis, data on strata thickness, lithology, age constraints, lithological properties, porosity, ... Keywords: Basin analysis, Error quantification, Monte Carlo simulation, Subsidence, Vienna Basin

Monika Hölzel; Robert Faber; Michael Wagreich

2008-11-01T23:59:59.000Z

255

Image analysis as a tool to quantify rigor contraction in pre-rigor-filleted fillets  

Science Conference Proceedings (OSTI)

This paper describes and evaluates an economical and efficient online image analysis method for registering length changes in pre-rigor-filleted fillets during rigor contraction. The study aimed to develop image analysis methods for distinguishing between ... Keywords: Fish quality, Image analysis, Oncorhynchus mykiss, Rainbow trout, Rigor mortis, Rigotech®

Lars Helge Stien; Jorma Suontama; Anders Kiessling

2006-02-01T23:59:59.000Z

256

BuildingPI: A future tool for building life cycle analysis  

SciTech Connect

Traditionally building simulation models are used at the design phase of a building project. These models are used to optimize various design alternatives, reduce energy consumption and cost. Building performance assessment for the operational phase of a buildings life cycle is sporadic, typically working from historical metered data and focusing on bulk energy assessment. Building Management Systems (BMS) do not explicitly incorporate feedback to the design phase or account for any changes, which have been made to building layout or fabric during construction. This paper discusses a proposal to develop an Industry Foundation Classes (IFC) compliant data visualization tool Building Performance Indicator (BuildingPI) for performance metric and performance effectiveness ratio evaluation.

O' Donnell, James; Morrissey, Elmer; Keane, Marcus; Bazjanac,Vladimir

2004-03-29T23:59:59.000Z

257

Building Energy Software Tools Directory : Weather Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Weather Tool Back to Tool Screenshot for Weather Tool. Screenshot for Weather Tool. Screenshot for Weather...

258

Life-Cycle Cost Analysis Tool for Chem/Bio Protection of ...  

Science Conference Proceedings (OSTI)

... Bio protection strategies based on user-defined scenarios. ... produces the types of analysis results that ... Based on the analyses performed, the results ...

2011-02-07T23:59:59.000Z

259

Advanced Data Analysis Tools for World-Wide X-ray ...  

Science Conference Proceedings (OSTI)

... of “ifeffit”, a multi-platform, open-source XAS data analysis software ... The energy dependent interaction of the intense synchrotron X-ray beam with ...

2012-10-01T23:59:59.000Z

260

Microsoft Word - Topic A Requirements _2_  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A Requirements A Requirements Topic A, Interconnection-Level Analysis and Planning Topic A awardees must fulfill the following requirements: 1. The work to be performed must cover the entire Interconnection. 2. Analyses and planning must be developed and performed in a transparent and collaborative manner, and the study processes must be open to participation by state and federal officials, representatives from independent system operators (ISOs) and regional transmission organizations (RTOs), utilities, and relevant stakeholder bodies or non-government organizations (NGO's), including appropriate entities in Canada and Mexico. Discuss approach to ensure consensus among stakeholders on key issues. 3. The awardee must establish a multi-constituency steering group that will provide

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


261

Tool fabrication system for micro/nano milling—function analysis and design of a six-axis Wire EDM machine  

E-Print Network (OSTI)

system for micro/nano milling—function analysis and designcan only be fabricated by milling operations instead ofprocesses with ultra-hard milling tools made of PCD or CBN.

Cheng, X.; Wang, Z. G.; Kobayashi, S.; Nakamoto, K.; Yamazaki, K.

2010-01-01T23:59:59.000Z

262

Multi actor multi criteria analysis (MAMCA) as a tool to support sustainable decisions: State of use  

Science Conference Proceedings (OSTI)

In this contribution, the multi actor multi criteria analysis (MAMCA) to evaluate transport projects is presented. This evaluation methodology specifically focuses on the inclusion of the different actors that are involved in a project, the so-called ... Keywords: Multi actor multi criteria analysis, Stakeholders, Transport project appraisal

Cathy Macharis; Laurence Turcksin; Kenneth Lebeau

2012-12-01T23:59:59.000Z

263

Green policy making and analysis support via process systems engineering tools  

Science Conference Proceedings (OSTI)

Environmental (Green) policymaking is the process of designing and applying environmental policies that is interdisciplinary in nature. Therefore the environmental policy analysis and making may include wide range of information and data; scientific, ... Keywords: activity models, green policy design, multi-dimensional formalism, ontologies, policy analysis, policy support system

Nasser Ayoub; Yuji Naka

2009-02-01T23:59:59.000Z

264

Medical informatics: transition from data acquisition to data analysis by means of bioinformatics tools and resources  

Science Conference Proceedings (OSTI)

Medical informatics has shifted its focus from acquisition and storage of healthcare data by integrating computational, informational, cognitive and organisational sciences to semantic analysis of the data for problem solving and clinical decision-making. ... Keywords: bioinformatics, biological databases, clinical diagnostics, decision making, homology, medical informatics, microarray, semantic analysis

Mahmood A. Mahdavi

2010-03-01T23:59:59.000Z

265

EERE Postdoctoral Research Awards: Research Topics  

NLE Websites -- All DOE Office Websites (Extended Search)

Topics to someone by E-mail Share EERE Postdoctoral Research Awards: Research Topics on Facebook Tweet about EERE Postdoctoral Research Awards: Research Topics on Twitter Bookmark...

266

Climate Suitability Tool Description  

Science Conference Proceedings (OSTI)

... The Climate Suitability Tool implements the method outlined in the following publications ... The analysis is based on a single-zone model of natural ...

267

Interval Data Analysis with the Energy Charting and Metrics Tool (ECAM)  

SciTech Connect

Analyzing whole building interval data is an inexpensive but effective way to identify and improve building operations, and ultimately save money. Utilizing the Energy Charting and Metrics Tool (ECAM) add-in for Microsoft Excel, building operators and managers can begin implementing changes to their Building Automation System (BAS) after trending the interval data. The two data components needed for full analyses are whole building electricity consumption (kW or kWh) and outdoor air temperature (OAT). Using these two pieces of information, a series of plots and charts and be created in ECAM to monitor the buildings performance over time, gain knowledge of how the building is operating, and make adjustments to the BAS to improve efficiency and start saving money.

Taasevigen, Danny J.; Katipamula, Srinivas; Koran, William

2011-07-07T23:59:59.000Z

268

Soil structural analysis tools and properties for Hanford site waste tank evaluation  

Science Conference Proceedings (OSTI)

As Hanford Site contractors address future structural demands on nuclear waste tanks, built as early as 1943, it is necessary to address their current safety margins and ensure safe margins are maintained. Although the current civil engineering practice guidelines for soil modeling are suitable as preliminary design tools, future demands potentially result in loads and modifications to the tanks that are outside the original design basis and current code based structural capabilities. For example, waste removal may include cutting a large hole in a tank. This report addresses both spring modeling of site soils and finite-element modeling of soils. Additionally seismic dynamic modeling of Hanford Site soils is also included. Of new and special interest is Section 2.2 that Professor Robert D. Holtz of the University of Washington wrote on plane strain soil testing versus triaxial testing with Hanford Site application to large buried waste tanks.

Moore, C.J.; Holtz, R.D.; Wagenblast, G.R.; Weiner, E.D.; Marlow, R.S.

1995-09-01T23:59:59.000Z

269

Analysis Tools for Sizing and Placement of Energy Storage for Grid Applications - A Literature Review  

DOE Green Energy (OSTI)

The purpose of this report was to review pertinent literature and studies that might reveal models capable of optimizing the siting, sizing and economic value of energy storage in the future smart grid infrastructure. Energy storage technology and utility system deployment have been subjects of intense research and development for over three decades. During this time, many models have been developed that consider energy storage implementation in the electric power industry and other applications. Nevertheless, this review of literature discovered no actual models and only a few software tools that relate specifically to the application environment and expected requirements of the evolving smart grid infrastructure. This report indicates the existing need for such a model and describes a pathway for developing it.

Hoffman, Michael G.; Kintner-Meyer, Michael CW; Sadovsky, Artyom; DeSteese, John G.

2010-09-24T23:59:59.000Z

270

A Perspective on WAMS Analysis Tools for Tracking of Oscillatory Dynamics  

Science Conference Proceedings (OSTI)

Over roughly the past two decades, an architecture has evolved for using Wide Area Measurement Systems to monitor power-system oscillatory dynamics. This includes, but is not limited to, the use of Phasor Measurement Units and advanced signal processing algorithms. Today, this architecture is further evolving toward real-time operation applications. This paper provides a perspective upon these analysis approaches, and defines and clarifies analysis operations, interactions, and application conditions. An overview of WAMS analysis approaches is given along with several examples from the western North American Power System.

Hauer, John F.; Trudnowski, Daniel; DeSteese, John G.

2007-06-28T23:59:59.000Z

271

Stability and robustness analysis tools for marine robot localization and mapping applications  

E-Print Network (OSTI)

The aim of this analysis is to explore the fundamental stability issues of a robotic vehicle carrying out localization, mapping, and feedback control in a perturbation-filled environment. Motivated by the application of ...

Englot, Brendan J

2009-01-01T23:59:59.000Z

272

An 128Innovative Vehicular Traffic Combined Simulation Tool: From a Detailed Analysis to Comprehensive Results  

Science Conference Proceedings (OSTI)

This paper presents a technologically advanced analysis method to study the urban traffic problem. The integrated approach described here may also provide interesting results for studying particularly extensive and complex situations, while guaranteeing ...

Agostino G. Bruzzone; D. Rivarolo

1996-04-01T23:59:59.000Z

273

Network tools forthe analysis and prediction of protein-protein interactions  

E-Print Network (OSTI)

In this thesis, we present two computational platforms for future biological research. The first, FNAC, is a flexible programmatic Framework for Network Analysis and Comparison that simplifies many common operations on ...

Weston, Kevin T. (Kevin Thomas), 1981-

2004-01-01T23:59:59.000Z

274

START: an automated tool for serial analysis of chromatin occupancy data  

Science Conference Proceedings (OSTI)

Summary: The serial analysis of chromatin occupancy technique (SACO) promises to become a widely used method for the unbiased genome-wide experimental identification of loci bound by a transcription factor of interest. We describe the first web-based ...

Voichita D. Marinescu; Isaac S. Kohane; Tae-Kyung Kim; David A. Harmin; Michael E. Greenberg; Alberto Riva

2006-04-01T23:59:59.000Z

275

SPiKE: engineering malware analysis tools using unobtrusive binary-instrumentation  

Science Conference Proceedings (OSTI)

Malware -- a generic term that encompasses viruses, trojans, spywares and other intrusive code -- is widespread today. Malware analysis is a multi-step process providing insight into malware structure and functionality, facilitating the development of ... Keywords: instrumentation, malware, security

Amit Vasudevan; Ramesh Yerraballi

2006-01-01T23:59:59.000Z

276

NUclear EVacuation Analysis Code (NUEVAC) : a tool for evaluation of sheltering and evacuation responses following urban nuclear detonations.  

SciTech Connect

The NUclear EVacuation Analysis Code (NUEVAC) has been developed by Sandia National Laboratories to support the analysis of shelter-evacuate (S-E) strategies following an urban nuclear detonation. This tool can model a range of behaviors, including complex evacuation timing and path selection, as well as various sheltering or mixed evacuation and sheltering strategies. The calculations are based on externally generated, high resolution fallout deposition and plume data. Scenario setup and calculation outputs make extensive use of graphics and interactive features. This software is designed primarily to produce quantitative evaluations of nuclear detonation response options. However, the outputs have also proven useful in the communication of technical insights concerning shelter-evacuate tradeoffs to urban planning or response personnel.

Yoshimura, Ann S.; Brandt, Larry D.

2009-11-01T23:59:59.000Z

277

Special Topics: Environmental Degradation: Visualizations  

Science Conference Proceedings (OSTI)

The Hendrix Group - Materials & Corrosion Engineers. Corrosion photos, glossary,case studies, and topical reports, 0, 843, Cathy Rohrer, 10/12/2007 1:52 PM

278

Special Topics: Environmental Degradation: Visualizations  

Science Conference Proceedings (OSTI)

The Hendrix Group - Materials & Corrosion Engineers. Corrosion photos, glossary,case studies, and topical reports, 0, 826, Cathy Rohrer, 10/12/2007 1:52 PM

279

Topics in Computer Algebra - CECM  

E-Print Network (OSTI)

Michael Monagan: Topics in Computer Algebra. ... Algorithms for Computer Algebra by Geddes, Czapor and Labahn Modern Computer Algebra by von zur ...

280

Study of Possible Applications of Currently Available Building Information Modeling Tools for the Analysis of Initial Costs and Energy Costs for Performing Life Cycle Cost Analysis  

E-Print Network (OSTI)

The cost of design, construction and maintenance of facilities is on continual rise. The demand is to construct facilities which have been designed by apply life cycle costing principles. These principles have already given strong decision making power to the manufacturing industry. The need to satisfy the environmental sustainability requirements, improve operational effectiveness of buildings and apply value engineering principles has increased the dependency on life cycle costing analysis. The objective is to obtain economically viable solutions by analyzing the alternatives during the design of a building. Though the LCCA process is able to give the desired results, it does have some problems which have stood as hindrances to the more widespread use of the LCCA concept and method. The literature study has highlighted that the problem areas are the lack of frameworks or mechanisms for collecting and storing data and the complexity of LCCA exercise, which involves the analysis of a thousand of building elements and a number of construction-type options and maintenance activities for each building element at detailed design stages. Building Information Modeling has been able to repeatedly answer the questions raised by the AEC industry. The aim of this study is to identify the areas where BIM can be effectively applied to the LCCA process and become a part of the workflow. In this study, initially four LCCA case studies are read and evaluated from the point of view of understanding the method in which the life cycle costing principles have been applied. The purpose, the type alternatives examined, the process of analysis, the type of software used and the results are understood. An attempt has been carried out to understand the workflow of the LCCA process. There is a confidence that Building Information Modeling is capable of handling changes during the design, construction and maintenance phases of the project. Since applying changes to any kind of information of the building during LCC analysis forms the core, it has become necessary to use computer building models for examining these changes. The building modeling softwares are enumerated. The case studies have highlighted that the evaluation of the alternatives are primarily to achieve energy efficient solutions for the buildings. Applying these solutions involves high initial costs. The return on investment is the means by which these solutions become viable to the owners of the facilities. This is where the LCCA has been applied. Two of the important cost elements of the LCC analysis are initial costs and the operating costs of the building. The collaboration of these modeling tools with other estimating software where the initial costs of the building can be generated is studied. The functions of the quantity take-off tools and estimating tools along with the interoperability between these tools are analyzed. The operating costs are generated from the software that focuses on sustainability. And the currently used tools for performing the calculations of the life cycle costing analysis are also observed. The objective is to identify if the currently available BIM tools and software can help in obtaining LCCA results and are able to offset the hindrances of the process. Therefore, the software are studied from the point of view of ease of handling data and the type of data that can be generated. Possible BIM workflows are suggested depending on the functions of the software and the relationship between them. The study has aimed at taking a snapshot the current tools available which can aid the LCCA process. The research is of significance to the construction industry as it forms a precursor to the application of Building Information Modeling to the LCCA process as it shows that it has the capacity of overcoming the obstacles for life cycle costing. This opens a window to the possibility of applying BIM to LCCA and furthering this study.

Mukherji, Payal Tapandev

2010-12-01T23:59:59.000Z

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


281

TEC Working Group Topic Groups Archives Consolidated Grant Topic Group |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Consolidated Grant Topic Consolidated Grant Topic Group TEC Working Group Topic Groups Archives Consolidated Grant Topic Group The Consolidated Grant Topic Group arose from recommendations provided by the TEC and other external parties to the DOE Senior Executive Transportation Forum in July 1998. It was proposed that the consolidation of multiple funding streams from numerous DOE sources into a single grant would provide a more equitable and efficient means of assistance to States and Tribes affected by DOE nuclear material shipments. The group serves as an important vehicle for DOE senior managers to assess and incorporate stakeholder input into the development of a consolidated funding vehicle for transportation activities, should DOE implement such a program. Some of the major issues under consideration by the Consolidated Grant

282

The German National Analysis Facility as a tool for ATLAS analyses  

E-Print Network (OSTI)

In 2008 the German National Analysis Facility (NAF) at DESY was established. It is attached to and builds on top of the DESY Grid infrastructure. The facility was designed to provide the best possible analysis infrastructure for high energy particle physics of the ATLAS, CMS, LHCb and ILC experiments. The Grid and local infrastructure of the German NAF will be reviewed with a focus on the ATLAS part. Both parts include large scale storage and a batch system. The main emphasis of this presentation is the ATLAS specific customisation and utilisation of the NAF. This refers not only to the NAF components but also to the different components of the ATLAS analysis framework. Experience from operating and supporting ATLAS users on the German NAF will be presented. The ATLAS usage of the different components will be shown including some typical use cases of user analysis. Finally, the question will be addressed if the design of the NAF meets the ATLAS expectations for efficient data analysis in the era of LHC data t...

Mehlhase, S; The ATLAS collaboration; Leffhalm, K

2010-01-01T23:59:59.000Z

283

1 The German National Analysis Facility as a tool for ATLAS analyses  

E-Print Network (OSTI)

In 2008 the German National Analysis Facility (NAF) at DESY was established. It is attached to and builds on top of DESY Grid infrastructure. The facility is designed to provide the best possible analysis infrastructure for high energy particle physics of the ATLAS, CMS, LHCb and ILC experiments. The Grid and local infrastructure of the NAF is reviewed with a focus on the ATLAS part. Both parts include large scale storage and a batch system. Emphasis is put on ATLAS specific customisation and utilisation of the NAF. This refers not only to the NAF components but also to the di erent components of the ATLAS analysis framework. Experience from operating and supporting ATLAS users on the NAF is presented in this paper. The ATLAS usage of the di erent components are shown including some typical use cases of user analysis. Finally, the question is addressed, if the design of the NAF meets the ATLAS expectations for effcient data analysis in the era of LHC data taking.

Mehlhase, S; The ATLAS collaboration; Leffhalm, K

2011-01-01T23:59:59.000Z

284

ProForm: A Tool for Pre-Feasibility Analysis of Renewable Energy and  

E-Print Network (OSTI)

· Landfill methane gas capture projects · Cogeneration projects #12;Pre-Feasibility Analysis · ProForm aids-generation, landfill methane and energy efficiency projects · Available in English and in Spanish #12;Rationale.e., projects with greenhouse gas reduction benefits) · Lack of familiarity among small entrepreneurs

285

An advanced BEM-based CAE tool for the analysis of earthing systems  

E-Print Network (OSTI)

in most large electrical over-ground substations with a grounding grid embedded in a multiple present TOTBEM: a freeware application for the in-house computer aided design and analysis of grounding potentials and compact underground substations. 1 Introduction The main objective of an earthing system

Colominas, Ignasi

286

A survey on automated dynamic malware-analysis techniques and tools  

Science Conference Proceedings (OSTI)

Anti-virus vendors are confronted with a multitude of potentially malicious samples today. Receiving thousands of new samples every day is not uncommon. The signatures that detect confirmed malicious threats are mainly still created manually, so it is ... Keywords: Dynamic analysis, malware

Manuel Egele; Theodoor Scholte; Engin Kirda; Christopher Kruegel

2012-02-01T23:59:59.000Z

287

Interconnection-Wide Transmission Planning Initiative: Topic A,  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A, A, Interconnection-Level Analysis and Planning Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning A description of the requirements for Topic A for all Interconnections under the Interconnection-Wide Transmission Planning Initiative, part of the American Recovery and Reinvestment Act. Interconnection-Wide Transmission Planning Initiative: Topic A, Interconnection-Level Analysis and Planning More Documents & Publications Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Eastern Interconnection on Electric Resource Planning and Priorities Microsoft Word - yDE-FOA-0000068.rtf Interconnection-Wide Transmission Planning Initiative: Topic B, Cooperation Among States in the Western Interconnection on Electric Resource Planning

288

The Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT): Data Analysis and Visualization for Geoscience Data  

SciTech Connect

To support interactive visualization and analysis of complex, large-scale climate data sets, UV-CDAT integrates a powerful set of scientific computing libraries and applications to foster more efficient knowledge discovery. Connected through a provenance framework, the UV-CDAT components can be loosely coupled for fast integration or tightly coupled for greater functionality and communication with other components. This framework addresses many challenges in the interactive visual analysis of distributed large-scale data for the climate community.

Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL); Bremer, Peer-Timo [Lawrence Livermore National Laboratory (LLNL); Doutriaux, Charles [Lawrence Livermore National Laboratory (LLNL); Patchett, John [Los Alamos National Laboratory (LANL); Williams, Sean [Los Alamos National Laboratory (LANL); Shipman, Galen M [ORNL; Miller, Ross G [ORNL; Pugmire, Dave [ORNL; Smith, Brian E [ORNL; Steed, Chad A [ORNL; Bethel, E Wes [Lawrence Berkeley National Laboratory (LBNL); Childs, Hank [Lawrence Berkeley National Laboratory (LBNL); Krishnan, Harinarayan [Lawrence Berkeley National Laboratory (LBNL); Silva, Claudio T. [New York University, Center for Urban Sciences; Santos, Emanuele [Universidade Federal do Ceara, Ceara, Brazil; Koop, David [New York University; Ellqvist, Tommy [New York University; Poco, Jorge [Polytechnic Institute of New York University; Geveci, Berk [Kitware; Chaudhary, Aashish [Kitware; Bauer, Andy [Kitware; Pletzer, Alexander [Tech-X Corporation; Kindig, Dave [Tech-X Corporation; Potter, Gerald [National Aeronautics and Space Administration (NASA); Maxwell, Thomas P. [National Aeronautics and Space Administration (NASA)

2013-01-01T23:59:59.000Z

289

The Ultra-scale Visualization Climate Data Analysis Tools (UV-CDAT): Data Analysis and Visualization for Geoscience Data  

SciTech Connect

To support interactive visualization and analysis of complex, large-scale climate data sets, UV-CDAT integrates a powerful set of scientific computing libraries and applications to foster more efficient knowledge discovery. Connected through a provenance framework, the UV-CDAT components can be loosely coupled for fast integration or tightly coupled for greater functionality and communication with other components. This framework addresses many challenges in interactive visual analysis of distributed large-scale data for the climate community.

Doutriaux, Charles [Lawrence Livermore National Laboratory (LLNL); Patchett, John [Los Alamos National Laboratory (LANL); Williams, Dean N. [Lawrence Livermore National Laboratory (LLNL); Miller, Ross G [ORNL; Steed, Chad A [ORNL; Krishnan, Harinarayan [Lawrence Berkeley National Laboratory (LBNL); Silva, Claudio T. [New York University, Center for Urban Sciences; Chaudhary, Aashish [Kitware; Bremer, Peer-Timo [Lawrence Livermore National Laboratory (LLNL); Pugmire, Dave [ORNL; Bethel, E Wes [Lawrence Berkeley National Laboratory (LBNL); Childs, Hank [Lawrence Berkeley National Laboratory (LBNL); Prabhat, [Lawrence Berkeley National Laboratory (LBNL); Geveci, Berk [Kitware; Bauer, Andy [Kitware; Pletzer, Alexander [Tech-X Corporation; Poco, Jorge [Polytechnic Institute of New York University; Ellqvist, Tommy [New York University; Santos, Emanuele [Universidade Federal do Ceara, Ceara, Brazil; Potter, Gerald [National Aeronautics and Space Administration (NASA); Smith, Brian E [ORNL; Maxwell, Thomas P. [National Aeronautics and Space Administration (NASA); Kindig, Dave [Tech-X Corporation; Koop, David [New York University

2013-01-01T23:59:59.000Z

290

Risk Management Tool Attributes:  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

- Tools & SMEs - Tools & SMEs Outline for Breakout Session TOOLS 1. Types of Tools a. Risk Management - Database & Reports, risk register, risk forms, risk tracking & monitoring, basis of estimate, action item tracking, historical record of risks & changes, configuration control, enterprise-wide, metrics, risk performance index, risk checklist, graphical display, management reporting (various levels), risk communications b. Risk Analysis i. Cost, ii. budgets, funding, cash-flow analysis, iii. Schedule iv. tailoring categories v. Integrated Cost & Schedule vi. Project phase analysis; organization ownership & joint planning c. Risk Knowledge and Lessons Learned Database i. Enterprise-wide ii. Job/owner-specific iii. Workshops - project specific, risk management,

291

Analysis of drilling fluid rheology and tool joint effect to reduce errors in hydraulics calculations  

E-Print Network (OSTI)

This study presents a simplified and accurate procedure for selecting the rheological model which best fits the rheological properties of a given non- Newtonian fluid and introduces five new approaches to correct for tool joint losses from expansion and contraction when hydraulics is calculated. The new approaches are enlargement and contraction (E&C), equivalent diameter (ED), two different (2IDs), enlargement and contraction plus equivalent diameter (E&C+ED), and enlargement and contraction plus two different IDs (E&C+2IDs). In addition to the Newtonian model, seven major non-Newtonian rheological models (Bingham plastic, Power law, API, Herschel-Bulkley, Unified, Robertson and Stiff, and Casson) provide alternatives for selecting the model that most accurately represents the shear-stress/shear-rate relationship for a given non- Newtonian fluid. The project assumes that the model which gives the lowest absolute average percent error (EAAP) between the measured and calculated shear stresses is the best one for a given non-Newtonian fluid. The results are of great importance in achieving correct results for pressure drop and hydraulics calculations and the results are that the API rheological model (RP 13D) provides, in general, the best prediction of rheological behavior for the mud samples considered (EAAP=1.51), followed by the Herschel-Bulkley, Robertson and Stiff, and Unified models. Results also show that corrections with E&C+2IDs and API hydraulics calculation give a good approximation to measured pump pressure with 9% of difference between measured and calculated data.

Viloria Ochoa, Marilyn

2006-08-01T23:59:59.000Z

292

DanteR: an extensible R-based tool for quantitative analysis of -omics data  

Science Conference Proceedings (OSTI)

Motivation: The size and complex nature of LC-MS proteomics data sets motivates development of specialized software for statistical data analysis and exploration. We present DanteR, a graphical R package that features extensive statistical and diagnostic functions for quantitative proteomics data analysis, including normalization, imputation, hypothesis testing, interactive visualization and peptide-to-protein rollup. More importantly, users can easily extend the existing functionality by including their own algorithms under the Add-On tab. Availability: DanteR and its associated user guide are available for download at http://omics.pnl.gov/software/. For Windows, a single click automatically installs DanteR along with the R programming environment. For Linux and Mac OS X, users must first install R and then follow instructions on the DanteR web site for package installation.

Taverner, Thomas; Karpievitch, Yuliya; Polpitiya, Ashoka D.; Brown, Joseph N.; Dabney, Alan R.; Anderson, Gordon A.; Smith, Richard D.

2012-09-15T23:59:59.000Z

293

A tool for the quantitative spatial analysis of mammary gland epithelium  

SciTech Connect

In this paper we present a method for the spatial analysis of complex cellular systems based on a multiscale study of neighborhood relationships. A function to measure those relationships, M, is introduced. The refined Relative Neighborhood Graph is then presented as a method to establish vicinity relationships within layered cellular structures, and particularized to epithelial cell nuclei in the mammary gland. Finally, the method is illustrated with two examples that show interactions within one population of epithelial cells and between two different populations.

Ortiz de Solorzano, Carlos; Fernandez-Gonzalez, Rodrigo

2004-04-09T23:59:59.000Z

294

AN ANALYSIS OF RESIDENTIAL RADON MEASUREMENTS IN KANSAS UTILIZING GRAPHICAL INFORMATION SYSTEM (GIs) TOOLS  

E-Print Network (OSTI)

Beginning January 1, 1987, the state of Kansas began collecting and recording data from residential radon tests. This data was collected based entirely upon voluntary home testing, performed by 1) the home owner (using a store-purchased radon test kit), 2) a professional radon testing laboratory or 3) by technicians from the Kansas Department of Health and Environment (KDHE) state laboratory. The majority of test results arc from tests conducted by homeowners. The radon database was analyzed using Arc Info 8.2. Three primary graphical information system (GIs) analyses were performed: 1) a comparison of the Kansas database to the Environmental Protection Agency (EPA)l Unites States Geographical Service (USGS) radon threat map for Kansas, 2) a data density analysis of statewide testing patterns and 3) an analysis of average radon values across clustered zip code districts in Sedgwick County, Shawnee County and the Kansas City metropolitan area (including Johnson, Wyandottc, Leavenworth and Douglas Counties). Comparison of the Kansas radon database to the EPAIUSGS threat asscssmcnt map showed similar but not identical trends. The data density analysis identified the zip code districts for which no test results had been collected and identified the areas of

Hanscn Brian

2003-01-01T23:59:59.000Z

295

Decision analysis: a tool to guide the R and D selection of alternative energy sources  

DOE Green Energy (OSTI)

The array of alternative energy sources which are vying for the federal government's R and D dollar is formidable when compared to the politically acceptable amount which can be used to fund the research. To guide how these funds should be dispersed, a rational, defensible procedure is needed which can repeatedly be applied as new technologies and new information become available. The procedure advanced in this paper is a decision analysis technique known as multi attribute decision analysis (MADA) and its use is illustrated in an evaluation and ranking of solar thermal electric power generating systems. Since the ultimate purchase decision is made in the market place, the preferences of potential users have been sampled and brought to bear on the ranking. The focus of this description is on the formulation of the problem structure and the decision model, the treatment of uncertainty, and how the results relate to the questions asked by and of the Department of Energy, which funded the study. A final note proposes how decision analysis can be used to address the broader questions of choice among competing technologies with cautions concerning misuse of the procedure.

Kriz, T.

1980-05-01T23:59:59.000Z

296

Prioritization Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

2013 Building Technologies Office Prioritization Tool 2 | Building Technologies Office eere.energy.gov Vision: develop an analytical tool that considers building efficiency...

297

NREL: Dynamic Maps, GIS Data, and Analysis Tools - About NREL GIS  

NLE Websites -- All DOE Office Websites (Extended Search)

About NREL GIS About NREL GIS NREL's Geographic Information System (GIS) team analyzes renewable energy resources and many other data sources to determine which energy technologies are viable solutions across the globe and inputs the data into a geographic information system. GIS is a computer-based system used to manipulate, manage, and analyze multidisciplinary geographic and related attribute data. The GIS system is composed of hardware, software, data, and expertise. Using a GIS system allows the user to perform several tasks, including data capture, data management, data manipulation, data analysis, and presentation of results in graphic or report forms. All information in GIS is linked to a spatial reference used to store and access data. GIS data layers can be recombined or manipulated and analyzed

298

Virtual radiation fields -- A virtual environment tool for radiological analysis and simulation  

Science Conference Proceedings (OSTI)

A virtual reality system was developed for computational and graphical modeling and simulation of radiation environments. This system, called Virtual Radiation Fields (VRF), demonstrates the usefulness of radiological analysis in simulation-based design for predicting radiation doses for robotic equipment and personnel working in a radiation environment. The system was developed for use in determining the radiation doses for robotic equipment to be used in tank-waste retrieval operations at the Hanford National Laboratory. As a reference case, specific application is made to simulate cleanup operations for Hanford tank C-106. A three-dimensional model representation of the tank and its predicted radiation levels are presented and analyzed. Tank cleanup operations were simulated to understand how radiation levels change during the cleanup phase and to predict cumulative radiation doses to robotic equipment to aid in the development of maintenance and replacement schedules.

Knight, T.W.; Dalton, G.R.; Tulenko, J.S. [Univ. of Florida, Gainesville, FL (United States). Dept. of Nuclear Engineering Sciences

1997-02-01T23:59:59.000Z

299

Training and Medical Training Issues Topic Group Meeting Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Medical Training Issues Topic Group Meeting Summary and Medical Training Issues Topic Group Meeting Summary Philadelphia, PA July 13, 1999 Fire Chief Bill Ruting (La Grange, IL, Fire Department) presented the results of the topic group's discussions: The MERRTT (Modular Emergency Response Radiological Transportation Training) series, comprised of 16 modules, is in the process of being finalized and pilot tested in a number of locations in the U.S. Pilot testing will include: using a needs assessment tool; developing model procedures; and actual training delivery of the MERRTT modules. The topic group, working with the regional government group staff representatives to TEC/WG, has sent a survey to State points-of-contact

300

IEEE JOURNAL ON EMERGING AND SELECTED TOPICS IN CIRCUITS AND SYSTEMS, VOL. 1, ISSUE 2, SEPTEMBER 2011 1 Design and Performance Analysis of Supercapacitor  

E-Print Network (OSTI)

2011 1 Design and Performance Analysis of Supercapacitor Charging Circuits for Wireless Sensor Nodes of multiple supercapacitors to maximize charging efficiency and minimize voltage-dependent leakage irradiation of 300 W/m2, the boost-up operation of our system enables fully charging the supercapacitors

Shinozuka, Masanobu

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


301

CFD analysis for the applicability of the natural convection shutdown heat removal test facility (NSTF) for the simulation of the VHTR RCCS. Topical report.  

DOE Green Energy (OSTI)

The Very High Temperature gas cooled reactor (VHTR) is one of the GEN IV reactor concepts that have been proposed for thermochemical hydrogen production and other process-heat applications like coal gasification. The USDOE has selected the VHTR for further research and development, aiming to demonstrate emissions-free electricity and hydrogen production at a future time. One of the major safety advantages of the VHTR is the potential for passive decay heat removal by natural circulation of air in a Reactor Cavity Cooling System (RCCS). The air-side of the RCCS is very similar to the Reactor Vessel Auxiliary Cooling System (RVACS) that has been proposed for the PRISM reactor design. The design and safety analysis of the RVACS have been based on extensive analytical and experimental work performed at ANL. The Natural Convective Shutdown Heat Removal Test Facility (NSTF) at ANL that simulates at full scale the air-side of the RVACS was built to provide experimental support for the design and analysis of the PRISM RVACS system. The objective of this work is to demonstrate that the NSTF facility can be used to generate RCCS experimental data: to validate CFD and systems codes for the analysis of the RCCS; and to support the design and safety analysis of the RCCS.

Tzanos, C. P.; Nuclear Engineering Division

2007-05-16T23:59:59.000Z

302

The Tracking and Analysis Framework (TAF): A tool for the integrated assessment of acid deposition  

SciTech Connect

A major challenge that has faced policy makers concerned with acid deposition is obtaining an integrated view of the underlying science related to acid deposition. In response to this challenge, the US Department of Energy is sponsoring the development of an integrated Tracking and Analysis Framework (TAF) which links together the key acid deposition components of emissions, air transport, atmospheric deposition, and aquatic effects in a single modeling structure. The goal of TAF is to integrate credible models of the scientific and technical issues into an assessment framework that can directly address key policy issues, and in doing so act as a bridge between science and policy. Key objectives of TAF are to support coordination and communication among scientific researchers; to support communications with policy makers, and to provide rapid response for analyzing newly emerging policy issues; and to provide guidance for prioritizing research programs. This paper briefly describes how TAF was formulated to meet those objectives and the underlying principals which form the basis for its development.

Bloyd, C.N. [Argonne National Lab., IL (United States); Henrion, M. [Lumina Decision Systems, Los Altos, CA (United States); Marnicio, R.J. [Foster Wheeler Environmental Corp., Columbus, Ohio (United States)

1995-06-01T23:59:59.000Z

303

Quantitative transportation risk analysis based on available data/databases: decision support tools for hazardous materials transportation  

E-Print Network (OSTI)

Historical evidence has shown that incidents due to hazardous materials (HazMat) releases during transportation can lead to severe consequences. The public and some agencies such as the Department of Transportation (DOT) show an increasing concern with the hazard associated with HazMat transportation. Many hazards may be identified and controlled or eliminated through use of risk analysis. Transportation Risk Analysis (TRA) is a powerful tool in HazMat transportation decision support system. It is helpful in choosing among alternate routes by providing information on risks associated with each route, and in selecting appropriate risk reduction alternatives by demonstrating the effectiveness of various alternatives. Some methodologies have been developed to assess the transportation risk; however, most of those proposed methodologies are hard to employ directly by decision or policy makers. One major barrier is the lack of the match between available data/database analysis and the numerical methodologies for TRA. In this work methodologies to assess the transportation risk are developed based on the availability of data or databases. The match between the availability of data/databases and numerical TRA methodologies is pursued. Each risk component, including frequency, release scenario, and consequence, is assessed based on the available data/databases. The risk is measured by numerical algorithms step by step in the transportation network. Based on the TRA results, decisions on HazMat transportation could be made appropriately and reasonably. The combination of recent interest in expanding or building new facilities to receive liquefied natural gas (LNG) carriers, along with increased awareness and concern about potential terrorist action, has raised questions about the potential consequences of incidents involving LNG transportation. One of those consequences, rapid phase transition (RPT), is studied in this dissertation. The incidents and experiments of LNG-water RPT and theoretical analysis about RPT mechanism are reviewed. Some other consequences, like pool spread and vapor cloud dispersion, are analyzed by Federal Energy Regulatory Commission (FERC) model.

Qiao, Yuanhua

2003-05-01T23:59:59.000Z

304

Automating the Coupling of ORIGEN with GADRAS via the Fallout Analysis Tool for National Technical Nuclear Forensics  

SciTech Connect

Nuclear forensic teams will be deployed to collect and evaluate fallout samples on the ground in the scenario of a low-yield nuclear detonation in a heavily populated area. Quick non-destructive methods of predicting the quality of the sample before it is analyzed in detail are essential for efficient post-event collections. In this work, the process of exporting Defense Land Fallout Interpretive Code (DELFIC) results into Gamma Detector Response and Analysis Software (GADRAS) has been automated within the Fallout Analysis Tool. This coupling allows for the simulation of detector responses to fallout samples with varying degrees of fractionation. The degree to which the samples are fractionated depends on the location of the samples in the fallout field. In the following study, this phenomenon is examined, as its understanding is important to the investigation of debris distribution. The simulated detector spectra from GADRAS can be used to compare peak ratios of volatile-refractory isotope pairs in order to determine the degree of fractionation. Simulated fractionated fallout samples from DELFIC for a 10 kt, pure 235U fission surface burst were modeled for distances ranging to 256 km out from ground zero, and for times up to 1 week from detonation. The fractionation ratios, also known as r values, from isotope concentrations, photon lines and peak areas of four volatile-refractory pairs were calculated and compared. Fractionation prediction via the peak areas method was evaluated for each pair by comparing the results with the simulated radionuclide inventory.

Monterial, Mateusz [ORNL; Jodoin, Vincent J [ORNL; Lefebvre, Jordan P [ORNL; Peplow, Douglas E. [ORNL; Hooper, David A [ORNL

2012-01-01T23:59:59.000Z

305

Organic solvent topical report  

Science Conference Proceedings (OSTI)

This report provides the basis for closing the organic solvent safety issue. Sufficient information is presented to conclude that risk posed by an organic solvent fire is within risk evaluation guidelines. This report updates information contained in Analysis of Consequences of Postulated Solvent Fires in Hanford Site Waste Tanks. WHC-SD-WM-CN-032. Rev. 0A (Cowley et al. 1996). However, this document will not replace Cowley et al (1996) as the primary reference for the Basis for Interim Operation (BIO) until the recently submitted BIO amendment (Hanson 1999) is approved by the US Department of Energy. This conclusion depends on the use of controls for preventing vehicle fuel fires and for limiting the use of flame cutting in areas where hot metal can fall on the waste surface.The required controls are given in the Tank Waste Remediation System Technical Safety Requirements (Noorani 1997b). This is a significant change from the conclusions presented in Revision 0 of this report. Revision 0 of this calcnote concluded that some organic solvent fire scenarios exceeded risk evaluation guidelines, even with controls imposed.

COWLEY, W.L.

1999-05-13T23:59:59.000Z

306

Assessment of HTGR Helium Compressor Analysis Tool Based on Newton-Raphson Numerical Application to Through-flow Analysis  

SciTech Connect

This study describes the development of a computer program for analyzing the off-design performance of axial flow helium compressors, which is one of the major concerns for the power conversion system of a high temperature gas-cooled reactor (HTGR). The compressor performance has been predicted by the aerodynamic analysis of meridional flow with allowances for losses. The governing equations have been derived from Euler turbomachine equation and the streamline curvature method, and then they have been merged into linearized equations based on the Newton-Raphson numerical method. The effect of viscosity is considered by empirical correlations to introduce entropy rises caused by primary loss sources. Use of the method has been illustrated by applying it to a 20-stage helium compressor of the GTHTR300 plant. As a result, the flow throughout the stages of the compressor has been predicted and the compressor characteristics have been also investigated according to the design specification. The program results show much better stability and good convergence with respect to other through-flow methods, and good agreement with the compressor performance map provided by JAEA. (authors)

Ji Hwan Kim; Hyeun Min Kim; Hee Cheon NO [Korea Advanced Institute of Science and Technology, 335 Gwahangno - 373-1 Guseong-dong, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

2006-07-01T23:59:59.000Z

307

Cool Farm Tool | Open Energy Information  

Open Energy Info (EERE)

Cool Farm Tool Cool Farm Tool Jump to: navigation, search Tool Summary Name: Cool Farm Tool Agency/Company /Organization: Unilever Sector: Land Focus Area: Agriculture Topics: Co-benefits assessment, Resource assessment Resource Type: Software/modeling tools User Interface: Spreadsheet Website: www.unilever.com/aboutus/supplier/sustainablesourcing/tools/?WT.LHNAV= Cost: Free Language: English Cool Farm Tool Screenshot References: Cool Farm Tool [1] Overview "The Cool Farm Tool is a new greenhouse gas calculator for farming. It's easy to use and gives instant results that invite users to try out alternatives and ask 'what if' questions. The tool was commissioned by Unilever from the University of Aberdeen The tool is ideal for farmers, supply chain managers and companies interested in quantifying their

308

Enhanced Chemical Incident Response Plan (ECIRP). Appendix F, remediation analysis with Decision Support Tools (DSTs) for wide-area chemical hazards.  

SciTech Connect

The Defense Threat Reduction Agency (DTRA) commissioned an assessment of the Consequence Management (CM) plans in place on military bases for response to a chemical attack. The effectiveness of the CM plans for recovering from chemical incidents was modeled using a multiple Decision Support Tools (DSTs). First, a scenario was developed based on an aerial dispersion of a chemical agent over a wide-area of land. The extent of contamination was modeled with the Hazard Prediction and Assessment Capability (HPAC) tool. Subsequently, the Analyzer for Wide Area Restoration Effectiveness (AWARE) tool was used to estimate the cost and time demands for remediation based on input of contamination maps, sampling and decontamination resources, strategies, rates and costs. The sampling strategies incorporated in the calculation were designed using the Visual Sample Plan (VSP) tool. Based on a gaps assessment and the DST remediation analysis, an Enhanced Chemical Incident Response Plan (ECIRP) was developed.

Hassig, Nancy L. (Pacific Northwest National Laboratory, Richland, WA); Pulsipher, Brent A. (Pacific Northwest National Laboratory, Richland, WA); Foltz, Greg W.; Hoette, Trisha Marie

2011-07-01T23:59:59.000Z

309

Topical report : CFD analysis for the applicability of the natural convection shutdown heat removal test facility (NSTF) for the simulation of the VHTR RCCS.  

DOE Green Energy (OSTI)

The Very High Temperature gas cooled reactor (VHTR) is one of the GEN IV reactor concepts that have been proposed for thermochemical hydrogen production and other process-heat applications like coal gasification. The United States Department of Energy has selected the VHTR for further research and development, aiming to demonstrate emissions-free electricity and hydrogen production at a future time. One of the major safety advantages of the VHTR is the potential for passive decay heat removal by natural circulation of air in a Reactor Cavity Cooling System (RCCS). The air-side of the RCCS is very similar to the Reactor Vessel Auxiliary Cooling System (RVACS) that has been proposed for the PRISM reactor design. The design and safety analysis of the RVACS have been based on extensive analytical and experimental work performed at ANL. The Natural Convection Shutdown Heat Removal Test Facility (NSTF) at ANL that simulates at full scale the air-side of the RVACS was built to provide experimental support for the design and analysis of the PRISM RVACS system. The objective of this work is to demonstrate that the NSTF facility can be used to generate RCCS experimental data: to validate CFD and systems codes for the analysis of the RCCS; and to support the design and safety analysis of the RCCS. At this time no reference design is available for the NGNP. The General Atomics (GA) gas turbine - modular helium reactor (GT-MHR) has been used in many analyses as a starting reference design. In the GT-MHR the reactor outlet temperature is 850 C, while the target outlet reactor temperature in VHTR is 1000 C. VHTR scoping studies with a reactor outlet temperature of 1000 C have been performed at GA and INEL. Although the reactor outlet temperature in the VHTR is significantly higher than in the GT-MHR, the peak temperature in the reactor vessel (which is the heat source for the RCCS) is not drastically different. In this work, analyses have been performed using reactor vessel temperatures from the GT-MHR design, and the VHTR scoping studies. To demonstrate the applicability of the NSTF facility for full scale simulation of the RCCS the following approach was used. CFD analyses were performed of the RCCS and of its simulation at NSTF to demonstrate that: all significant fluid flow and heat transfer phenomena in the RCCS can be simulated at NSTF; and RCCS simulations at NSTF can cover the whole range of variation of the parameters describing these important phenomena in the RCCS. In CFD analyses, the simulation of turbulence is one of the most significant challenges. Direct Numerical Simulation (DNS) and Large Eddy Simulation (LES) of turbulence in large scale systems require excessive computational resources. The use of the Low-Re number k-{var_epsilon} model, which resolves the boundary layer, is computationally expensive in studies where many simulations have to be performed. In Ref. 2 it was shown that in the RCCS, heat transfer coefficient predictions of the high-Re number k-{var_epsilon} model are closer to those of the low-Re number model than those of heat transfer correlations. In this work, the standard high-Re number k-{var_epsilon} was used to simulate turbulence, and all analyses were performed with the CFD code STARCD.

Tzanos, C. P. (Nuclear Engineering Division)

2007-05-16T23:59:59.000Z

310

Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools LBNL's WINDOW and THERM software tools are key to evaluating new design concepts RESFEN -- Version 5.0 now available A PC program for calculating the heating and...

311

Tool Catalog  

Science Conference Proceedings (OSTI)

... Microscopy tool. File Utilities, Control file load order, JPEG compression, etc. Fourier, ... Fractal - Koch, Generate Koch curves.. Fractal ...

312

Regularized Latent Semantic Indexing: A New Approach to Large-Scale Topic Modeling  

Science Conference Proceedings (OSTI)

Topic modeling provides a powerful way to analyze the content of a collection of documents. It has become a popular tool in many research areas, such as text mining, information retrieval, natural language processing, and other related fields. In real-world ... Keywords: Topic modeling, distributed learning, online learning, regularization, sparse methods

Quan Wang; Jun Xu; Hang Li; Nick Craswell

2013-01-01T23:59:59.000Z

313

Other Topics | Department of Energy  

NLE Websites -- All DOE Office Websites (Extended Search)

Other Topics Other Topics Other Topics Are States required to provide a 1099 to individuals who receive State Energy Efficient Appliance Rebates? Can DOE provide suggested Privacy Act language for use in a universal WAP application form? Are weekly reports required for the SEP ARRA grant? Are there any regulations that prohibit using WAP, SEP, or EECBG funds to hire a person with a criminal record? How to keep track of Recovery Act and Non-Recovery Act funding on One Contract DOE position on potential patent infringement Reporting of funds drawn down to capitalize a revolving loan fund or loan loss reserve For purposes of Section 410 of the American Recovery and Reinvestment Act (ARRA), what are the relevant versions of the referenced building energy codes? Can a grantee request a waiver for a replacement refrigerator that

314

Topical report on release scenario analysis of long-term management of high-level defense waste at the Hanford Site  

SciTech Connect

Potential release scenarios for the defense high-level waste (HLW) on the Hanford Site are presented. Presented in this report are the three components necessary for evaluating the various alternatives under consideration for long-term management of Hanford defense HLW: identification of scenarios and events which might directly or indirectly disrupt radionuclide containment barriers; geotransport calculations of waste migration through the site media; and consequence (dose) analyses based on groundwater and air pathways calculations. The scenarios described in this report provide the necessary parameters for radionuclide transport and consequence analysis. Scenarios are categorized as either bounding or nonbounding. Bounding scenarios consider worst case or what if situations where an actual and significant release of waste material to the environment would happen if the scenario were to occur. Bounding scenarios include both near-term and long-term scenarios. Near-term scenarios are events which occur at 100 years from 1990. Long term scenarios are potential events considered to occur at 1000 and 10,000 years from 1990. Nonbounding scenarios consider events which result in insignificant releases or no release at all to the environment. Three release mechanisms are described in this report: (1) direct exposure of waste to the biosphere by a defined sequence of events (scenario) such as human intrusion by drilling; (2) radionuclides contacting an unconfined aquifer through downward percolation of groundwater or a rising water table; and (3) cataclysmic or explosive release of radionuclides by such mechanisms as meteorite impact, fire and explosion, criticality, or seismic events. Scenarios in this report present ways in which these release mechanisms could occur at a waste management facility. The scenarios are applied to the two in-tank waste management alternatives: in-situ disposal and continued present action.

Wallace, R.W.; Landstrom, D.K.; Blair, S.C.; Howes, B.W.; Robkin, M.A.; Benson, G.L.; Reisenauer, A.E.; Walters, W.H.; Zimmerman, M.G.

1980-11-01T23:59:59.000Z

315

Magnesium: Digital Resource Center Text Topic - TMS  

Science Conference Proceedings (OSTI)

Feb 12, 2007 ... Print this topic. Topic Title WEB RESOURCE: MIL-HDBK-5H: Metallic Materials and Elements for Aerospace Vehicle Structures ...

316

TEC Working Group Topic Groups Archives  

Energy.gov (U.S. Department of Energy (DOE))

The following Topic Groups are no longer active; however, related documents and notes for these archived Topic Groups are available through the following links:

317

ARCHY (Analysis and Reverse Engineering of Code Using Hierarchy and Yourdon): A tool for Fortran code maintenance and development  

SciTech Connect

Analysis and Reverse Engineering of Code Using Hierarchy and Yourdon (ARCHY) diagrams is a tool for development and maintenance of FORTRAN programs. When FORTRAN source code is read by ARCHY, it automatically creates a database that includes a data dictionary, which lists each variable, its dimensions, type, category (set, referenced, passed), module calling structure, and common block information. The database exists in an ASCII file that can be directly edited or maintained with the ARCHY database editor. The database is used by ARCHY to product structure charts and Yourdon data flow diagrams in PostScript format. ARCHY also transfers database information such as a variable definitions, module descriptions, and technical references to and from module headers. ARCHY contains several utilities for making programs more readable. It can automatically indent the body of loops and conditionals and resequence statement labels. Various language extensions are translated into FORTRAN-77 to increase code portability. ARCHY frames comment statements and groups FORMAT statements at the end of modules. It can alphabetize modules within a program, end-of-line labels can be added, and it can also change executable statements to upper or lower case. ARCHY runs under the VAX-VMS operating system and inputs from VAX-FORTRAN, IBM-FORTRAN, and CRAY FORTRAN sources files.

Aull, J.E.

1990-10-01T23:59:59.000Z

318

Simulation tools  

E-Print Network (OSTI)

In the last two decades, simulation tools made a significant contribution to the great progress in development of power electronics. Time to market was shortened and development costs were reduced drastically. Falling costs, as well as improved speed and precision, opened new fields of application. Today, continuous and switched circuits can be mixed. A comfortable number of powerful simulation tools is available. The users have to choose the best suitable for their application. Here a simple rule applies: The best available simulation tool is the tool the user is already used to (provided, it can solve the task). Abilities, speed, user friendliness and other features are continuously being improved—even though they are already powerful and comfortable. This paper aims at giving the reader an insight into the simulation of power electronics. Starting with a short description of the fundamentals of a simulation tool as well as properties of tools, several tools are presented. Starting with simplified models ...

Jenni, F

2006-01-01T23:59:59.000Z

319

DOE Technical Standards Program: Topical Committees  

NLE Websites -- All DOE Office Websites (Extended Search)

Topical Committee Topical Committee Office of Nuclear Safety Internet Linkage for TSP Topical Committees In the interest of optimum technology transfer, the DOE Technical Standards Program (TSP) has set up a network of topical committees. These committees provide a forum for communication across the DOE complex on technical standards related activities. If you would like information about a specific topical committee, or wish to join one of the groups, we've provided a roster of TSP Topical Committees and corresponding Topical Committee Chairpersons. Expectations of DOE Topical Committees The March 9, 1998 memorandum (provided here in web page format) from Rick Serbu, Technical Standards Program (TSP) Manager, EH-31, to J. Robert Wayland, Metrology Topical Committee Secretary, Sandia National Laboratories, discusses general TSP expectations of DOE topical standards committees. This memorandum should be reviewed by all DOE/contractor personnel involved in topical committee activities.

320

Information Resources: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Tools Below are links to tools that assist users with project planning and analysis. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the report, "Residential Lighting End-Use Consumption Study," which developed a regional estimation framework within a national sample design that allows for the estimation of lamp usage and energy consumption. The tool contains the full set of estimates produced by methodology described in the study. Simple Modular LED Cost Model (LEDCOM) The LED Cost Model provides a simplified method for analyzing the manufacturing costs of an LED package, and enables those involved in the manufacture of LED packages to evaluate the relative impact of changes made at different points in the manufacturing process on the final LED package cost.

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


321

Topic modeling on historical newspapers  

Science Conference Proceedings (OSTI)

In this paper, we explore the task of automatic text processing applied to collections of historical newspapers, with the aim of assisting historical research. In particular, in this first stage of our project, we experiment with the use of topical models ...

Tze-I Yang; Andrew J. Torget; Rada Mihalcea

2011-06-01T23:59:59.000Z

322

Microsoft PowerPoint - 07XTPO-M_Perf_Tools.pptx  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Tools Performance Tools Customer Documentation and Training Topics - CrayPat - Apprentice2 10/18/2010 2 Cray Private Performance Tools - CrayPat is a performance analysis tool that collects performance information from a user application C P t t t t f i t li d CrayPat supports two types of experiments: sampling and tracing * Sampling experiments capture values from the call stack or th t t ifi d i t l h ifi d the program counter at specified intervals or when a specified counter overflows * Tracing counts an event, such as the number of times an MPI ll i t d call is executed CrayPat uses PAPI to read the performance counters of the Opteron processor - Cray Apprentice2 generates graphical displays from the .ap2 file 10/18/2010 3 Cray Private CrayPat * Consists of three major components - pat_build

323

Renewable Energy Financial Instruments Guidance Tool (REFINe) | Open Energy  

Open Energy Info (EERE)

Renewable Energy Financial Instruments Guidance Tool (REFINe) Renewable Energy Financial Instruments Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy Topics: Policy Impacts Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/0,,contentMDK:2298 Equivalent URI: cleanenergysolutions.org/content/renewable-energy-financial-instrument Language: English Policies: "Deployment Programs,Financial Incentives" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Training & Education Renewable Energy Financial Instruments Guidance Tool (REFINe) aims to assist policy in identifying appropriate financial instruments to scale-up

324

NREL: Systems Engineering - Models and Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

and Tools The NREL Systems Engineering Initiative develops, integrates, and analyzes wind energy system models. NREL has developed an overall integrated system analysis tool...

325

OOTW Force Design Tools  

Science Conference Proceedings (OSTI)

This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

Bell, R.E.; Hartley, D.S.III; Packard, S.L.

1999-05-01T23:59:59.000Z

326

Environment - Analysis & Projections - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

327

Electricity - Analysis & Projections - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

328

Indonesia - Analysis - U.S. Energy Information ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

329

Analysis & Projections - U.S. Energy Information ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

330

Global Trade and Analysis Project (GTAP) Model | Open Energy Information  

Open Energy Info (EERE)

Global Trade and Analysis Project (GTAP) Model Global Trade and Analysis Project (GTAP) Model Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Global Trade Analysis Project (GTAP) Model Agency/Company /Organization: Purdue University Sector: Climate, Energy Topics: Baseline projection, - Macroeconomic, Market analysis, Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Moderate Website: www.gtap.agecon.purdue.edu/models/current.asp Cost: Free References: GTAP[1] Related Tools IGES GHG Calculator For Solid Waste ICCT Roadmap Model Applied Dynamic Analysis of the Global Economy (ADAGE) Model

331

Reference Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Reference Tools Current Greenhouse Gas Concentrations Name that compound: The numbers game for CFCs, HFCs, HCFCs, and Halons Conversion Tables and More Glossary Acronyms CDIAC's...

332

Percussion Tool  

INL has invented a new technology for use in an electric percussion hammer drill, which includes a reciprocal moveable hammer that drives a tool bit ...

333

Tools & Technologies  

Energy.gov (U.S. Department of Energy (DOE))

We provide leadership for transforming workforce development through the power of technology. It develops corporate educational technology policy and enables the use of learning tools and...

334

CMVRTC: Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

tool that graphically displays weight and inspection stations for each state across a Google map. Visit the Nationwide Weight & Inspection Station site to view your data. google...

335

Topics in Forensic DNA Analysis & Interpretation  

Science Conference Proceedings (OSTI)

... Note higher RFU values due to salt reduction with spin columns ... 2 degree shift in temperature of the heat plate can ... Vial caps will transfer low levels ...

2011-03-24T23:59:59.000Z

336

Advanced Topics in Forensic DNA Analysis  

Science Conference Proceedings (OSTI)

... QIAGEN MiniElute reduces salt levels in ... has a big effect (A 1-2 degree shift in temperature of the heat plate can ... Vial caps will transfer low levels ...

2011-08-19T23:59:59.000Z

337

Topics and Techniques in Forensic DNA Analysis  

Science Conference Proceedings (OSTI)

... Applied Genetics NIST Human Identity Project Teams within the Applied Genetics Group ... NYC OCME Forensic Biology Continuing Education ...

2012-04-17T23:59:59.000Z

338

Topics and Techniques in Forensic DNA Analysis  

Science Conference Proceedings (OSTI)

... Kit Testing Role of the NIST Human Identity Project Team STRBase website ... Page 9. NYC OCME Forensic Biology Continuing Education ...

2012-04-14T23:59:59.000Z

339

Topics in Forensic DNA Analysis & Interpretation  

Science Conference Proceedings (OSTI)

... Experience • University of Virginia/FBI Laboratory (1992-1995) – Work ... Most forensic DNA laboratories follow PCR ... for the polymer) • If a lab is not ...

2011-03-24T23:59:59.000Z

340

Advanced Topics in Forensic DNA Analysis  

Science Conference Proceedings (OSTI)

... S'1 S1 energy ... The Copenhagen Forensic Genetic Summer School ... 2. ~50% of total polymer remains in the pouch after “consumption” 3. Expiration ...

2012-07-05T23:59:59.000Z

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


341

Simulation and Animation Tools for Analysis of Vehicle Collision: SMAC (Simulation Model of Automobile Collisions) and Carmma (Simulation Animations)  

E-Print Network (OSTI)

source code was written in Tcl/Tk(Tool Command Language).Tcl/Tk is a scripting language used on UNIX platforms tosource code is written in Tcl/Tk. For the UNIX operating

Hongola, Bruce; Chan, Ching-Yao

1999-01-01T23:59:59.000Z

342

Grid Renewable Energy-Economic and Financial Analysis | Open Energy  

Open Energy Info (EERE)

Economic and Financial Analysis Economic and Financial Analysis Jump to: navigation, search Tool Summary Name: Grid Renewable Energy-Economic and Financial Analysis Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy Topics: Finance, Implementation, Market analysis Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: Grid Renewable Energy-Economic and Financial Analysis[1] Resources South Africa: Renewable Energy Market Transformation (REMT) Project, Draft Report, Economic and Financial Analysis Due Diligence Estimating Air Pollution Emissions from Fossil Fuel Use in the Electricity Sector in Mexico, North American Commission for Environmental Cooperation New Energy for America, The Apollo Jobs Report: Good Jobs & Energy

343

Current Topics in Radiological Control  

NLE Websites -- All DOE Office Websites (Extended Search)

The Office of Health, Safety and Security HSS Logo Department of Energy Seal Left Tab SEARCH Right Tab TOOLS Right Tab Left Tab HOME Right Tab Left Tab ABOUT US Right Tab Left Tab...

344

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Egypt Z Tool Applications Free Recently Updated ZEBO design decision support; zero energy building; sensitivity analysis; energy simulation; thermal comfort; hot climate Free...

345

Building Energy Software Tools Directory: Tools by Country -...  

NLE Websites -- All DOE Office Websites (Extended Search)

Tool Applications Free Recently Updated CYPE-Building Services building services, single model, energy simulation, sizing, HVAC, plumbing, sewage, electricity, solar, analysis of...

346

NREL Market Analysis | Open Energy Information  

Open Energy Info (EERE)

NREL Market Analysis NREL Market Analysis Jump to: navigation, search Tool Summary Name: NREL Market analysis Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Topics: Market analysis Website: www.nrel.gov/analysis/market_analysis.html NREL Market analysis Screenshot References: NREL Market analysis[1] Summary "The laboratory's market analysis helps increase the use of renewable energy (RE) and energy efficiency (EE) technologies in the marketplace by providing strategic information to stakeholders interested in rapidly changing electricity markets. Our high-quality and objective crosscutting assessments and analysis support informed decision making. Primary focuses include:" Energy Technology/Program Cost, Performance, and Market Data

347

Topic B Awardee: Western Governors' Association | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Western Governors' Association Western Governors' Association Topic B Awardee: Western Governors' Association For the Topic A input requirements of the award, the states and provinces in the Western Interconnection have formed a new committee -- the State and Provincial Steering Committee -- to provide input in regional transmission planning and analysis in the interconnection. The Committee will consist of representatives from each state and province in the Western Interconnection. Pending formal announcement, the Committee is preparing to carry out the Topic A input tasks as outlined in Topic B of the U.S. Department of Energy transmission funding opportunity announcement issued in June 2009. A preliminary meeting of the Steering Committee was held in Tempe, AZ on November 6, 2009.

348

Electricity Advisory Committee Potential Study Topics Requested by  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Potential Study Topics Requested by Potential Study Topics Requested by U.S. Department of Energy As of 2-10-11 Note: DOE invites the EAC to discuss, for each of the topics listed below, whether it should undertake a detailed analysis of the subject, or whether it should limit itself to providing recommendations to DOE about how the topic should be framed and analyzed by the national laboratories or other parties. 1. Long-Term Funding for Electric Infrastructure Analytic and Planning Capabilities. Using funds provided by the 2009 Recovery Act, the U.S. Department of Energy (DOE) has funded the establishment of interconnection-level capabilities to address long-term analytic and planning challenges. DOE also believes that given the likelihood of ongoing fundamental change in the electricity sector, the strategic

349

ARM - Data Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

govDataData Tools govDataData Tools Data Tools Most ARM data is archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) is relatively compact, is appendable, is capable of storing descriptive "meta-data" along with measurement data, and is platform-independent. However, the organization of data within netCDF files tends to follow conventions reflecting either the source or the end use of the data. Consequently, tools developed for use with netCDF files following one convention may not be optimal for use with those following another convention. For example, tools designed for examination of geographically-gridded data may not be well-suited for analysis of time-series data such as that generated by ARM. In addition, some of the

350

Energy Technology Systems Analysis Program (MARKAL) | Open Energy  

Open Energy Info (EERE)

Energy Technology Systems Analysis Program (MARKAL) Energy Technology Systems Analysis Program (MARKAL) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Technology Systems Analysis Program (MARKAL) Agency/Company /Organization: International Energy Agency Sector: Energy Topics: Co-benefits assessment, Pathways analysis, Policies/deployment programs Resource Type: Software/modeling tools User Interface: Desktop Application Website: www.etsap.org/index.asp Country: Belgium, Canada, Denmark, Finland, France, Germany, Greece, Italy, Japan, South Korea, Netherlands, Norway, Sweden, United States, United Kingdom, Switzerland, Albania, Australia, Austria, Bosnia and Herzegovina, Brazil, Bulgaria, Colombia, Croatia, India, Indonesia, Kazakhstan, Malaysia, New Zealand, China, Philippines, Poland, Portugal, South Africa, Romania, Serbia, Spain, Taiwan, Thailand, Vietnam

351

Electricity Markets Analysis (EMA) Model | Open Energy Information  

Open Energy Info (EERE)

Electricity Markets Analysis (EMA) Model Electricity Markets Analysis (EMA) Model Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Electricity Markets Analysis (EMA) Model Agency/Company /Organization: Research Triangle Institute Sector: Energy Topics: Co-benefits assessment, - Energy Access, Market analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Advanced Website: www.rti.org/page.cfm?objectid=DDC06637-7973-4B0F-AC46B3C69E09ADA9 RelatedTo: Applied Dynamic Analysis of the Global Economy (ADAGE) Model Electricity Markets Analysis (EMA) Model Screenshot References: Electricity Markets Analysis (EMA) Model[1]

352

Feature - WATER Tool Released  

NLE Websites -- All DOE Office Websites (Extended Search)

Water Assessment for Transportation Energy Resources (WATER) Tool Released Water Assessment for Transportation Energy Resources (WATER) Tool Released Argonne National Laboratory recently released an open access online tool called WATER (Water Assessment for Transportation Energy Resources), which quantifies water footprint of fuel production stages from feedstock production to conversion process for biofuel with county, state, and regional level spatial resolution. WATER provides analysis on water consumption and its impact on water quality. It contains biofuel pathways for corn grain ethanol, soybean biodiesel, and cellulosic ethanol produced from corn stover and wheat straw. Perennial grass (Switchgrass and Miscanthus) and forest wood residue-based biofuel pathways are currently under development. The WATER tool enables users to conduct pathway comparison, scenario development, and regional specific feedstock analysis in supporting of biofuel industry development and planning. It is available at http://water.es.anl.gov/.

353

Environmental Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

The Office of Health, Safety and Security HSS Logo Department of Energy Seal Left Tab SEARCH Right Tab TOOLS Right Tab Left Tab HOME Right Tab Left Tab ABOUT US Right Tab Left Tab...

354

Illustrative Scenarios Tool (European Union) | Open Energy Information  

Open Energy Info (EERE)

Illustrative Scenarios Tool (European Union) Illustrative Scenarios Tool (European Union) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Illustrative Scenarios Tool (European Union) Focus Area: Propane Topics: Opportunity Assessment & Screening Website: www.eutransportghg2050.eu/cms/illustrative-scenarios-tool/ Equivalent URI: cleanenergysolutions.org/content/illustrative-scenarios-tool-european- Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Technical Assistance Regulations: Emissions Standards The SUstainabLe TrANsport (SULTAN) Illustrative Scenarios Tool is a high-level calculator to help provide estimates of the possible impacts of

355

Prioritization Tool  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Program Peer Review Alexis Abramson Chief Scientist alexis.abramson@ee.doe.gov April 2, 2013 Building Technologies Office Prioritization Tool 2 | Building Technologies Office eere.energy.gov Vision: develop an analytical tool that considers building efficiency measures and technologies, and assesses and compares their potential value into the future Uses: * Inform programmatic decision-making * Examine "what if" scenarios * Create targets for FOAs

356

Automated Human Performance Analysis: Evaluation of Advanced Tools for Extracting Useful Information from Text-Based Reports  

Science Conference Proceedings (OSTI)

Automated text processing systems represent a potentially powerful technology for deriving valuable information from text-based documents. This report describes a preliminary evaluation of advanced tools for extracting useful information from text-based incident and event reports typical of those generated in the energy industry. It also presents a review of background literature and current research related to automated text processing.

2001-11-28T23:59:59.000Z

357

Bridging the analytical gap between distributed cognition and actor network theory using a tool for information trajectory analysis  

Science Conference Proceedings (OSTI)

Motivation -- Distributed Cognition (DCog) and Actor-Network Theory (ANT) are two related perspectives which can be adopted when studying the relationship between humans and artefacts in collaborative environments. Although these perspectives ... Keywords: TITAN, actor-network theory, distributed cognition, information trajectories, research tool

Stuart Moran; Keiichi Nakata; Satoru Inoue

2012-08-01T23:59:59.000Z

358

New test procedure evaluates quality and accuracy of energy analysis tools for the residential building retrofit market.  

E-Print Network (OSTI)

building retrofit market. Reducing the energy use of existing homes in the United States offers significant energy-saving opportunities, which can be identified through building simulation software tools for residential buildings, the National Renewable Energy Laboratory's (NREL) Buildings Research team developed

359

TOPIC Brief BUILDING TECHNOLOGIES PROGRAM Lighting: Residential...  

NLE Websites -- All DOE Office Websites (Extended Search)

Lighting: Residential and Commercial Requirements TOPIC BRIEF 1 Lighting: Residential and Commercial Requirements Residential Lighting Requirements The 2009 International Energy...

360

Text segmentation: A topic modeling perspective  

Science Conference Proceedings (OSTI)

In this paper, the task of text segmentation is approached from a topic modeling perspective. We investigate the use of two unsupervised topic models, latent Dirichlet allocation (LDA) and multinomial mixture (MM), to segment a text into semantically ... Keywords: Dynamic programming, Latent Dirichlet allocation, Semantic information, Text segmentation, Topic modeling

Hemant Misra; François Yvon; Olivier Cappé; Joemon Jose

2011-07-01T23:59:59.000Z

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


361

Poverty Social Impact Analysis | Open Energy Information  

Open Energy Info (EERE)

Poverty Social Impact Analysis Poverty Social Impact Analysis Jump to: navigation, search Tool Summary Name: Poverty Social Impact Analysis Agency/Company /Organization: World Bank Sector: Climate Complexity/Ease of Use: Moderate Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTPSIA/0,,contentMDK:2041525 Related Tools Poverty Social Impact Analysis Intertemporal Computable Equilibrium System (ICES) Partnership for Economic Policy Modeling and Policy Impact Analysis (MPIA) ... further results Find Another Tool FIND DEVELOPMENT IMPACTS ASSESSMENT TOOLS An ex-ante or ex-post analysis that predicts the distributional social impacts of public policies, with particular emphasis on the poor and vulnerable. This approach generates evidence to inform policy dialogue, debate and decision-making. In climate change mitigation projects, PSIA can

362

MIT Emissions Prediction and Policy Analysis (EPPA) Model | Open Energy  

Open Energy Info (EERE)

MIT Emissions Prediction and Policy Analysis (EPPA) Model MIT Emissions Prediction and Policy Analysis (EPPA) Model Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: MIT Emissions Prediction and Policy Analysis (EPPA) Model Agency/Company /Organization: Massachusetts Institute of Technology (MIT) Topics: Analysis Tools Complexity/Ease of Use: Not Available Website: dspace.mit.edu/handle/1721.1/29790 Cost: Free Related Tools IGES GHG Calculator For Solid Waste Energy and Power Evaluation Program (ENPEP) Regional Economic Models, Inc. (REMI) Model ... further results The part of the MIT Integrated Global Systems Model (IGSM) that represents human systems; a recursive-dynamic multi-regional general equilibrium model

363

Policy Analysis Modeling System (PAMS) | Open Energy Information  

Open Energy Info (EERE)

Analysis Modeling System (PAMS) Analysis Modeling System (PAMS) (Redirected from Policy Analysis Modeling System) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Policy Analysis Modeling System Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings, Energy Efficiency Topics: Policies/deployment programs Resource Type: Software/modeling tools User Interface: Spreadsheet Website: clasponline.org/ResourcesTools/Tools/PolicyAnalysisModelingSystem Equivalent URI: cleanenergysolutions.org/content/policy-analysis-modeling-system-pams Regulations: "Appliance & Equipment Standards and Required Labeling,Net Metering & Interconnection" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

364

Simulation Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Building simulation tool screen capture Building simulation tool screen capture Simulation Tools Researchers develop whole-building energy simulation software programs that allow architects and building engineers to design or retrofit buildings for maximum energy efficiency and occupant comfort. Programs developed by researchers include: the EnergyPlus whole building simulation program, the Modelica Buildings library for rapid prototyping and controls design, the Building Controls Virtual Test Bed for co-simulation and for model-based operation, and the GenOpt generic optimization program. Contacts Philip Haves PHaves@lbl.gov (510) 486-6512 Michael Wetter MWetter@lbl.gov (510) 486-6990 Links Simulation Research Group Batteries and Fuel Cells Buildings Energy Efficiency Applications Commercial Buildings

365

Regulatory Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Regulatory Tools Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations. Part I Title 40 CFR Part 194 Criteria for the Certification and Recertification of the Waste Isolation Pilot Plant's Compliance With the Disposal Regulations; Alternative Provisions; Proposed Rule. Friday August 9, 2002. Part II Title 40 CFR Part 194 Criteria for the Certification and Recertification of the Waste Isolation Pilot Plant's Compliance With the Disposal Regulations: Certification Decision; Final Rule. May 18, 1998. Part III

366

A latent topic extracting method based on events in a document and its application  

Science Conference Proceedings (OSTI)

Recently, several latent topic analysis methods such as LSI, pLSI, and LDA have been widely used for text analysis. However, those methods basically assign topics to words, but do not account for the events in a document. With this background, in this ...

Risa Kitajima; Ichiro Kobayashi

2011-06-01T23:59:59.000Z

367

Nuclear & Uranium - Analysis & Projections - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

368

Markets & Finance - Analysis & Projections - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

369

Natural Gas - Analysis & Projections - U.S. Energy ...  

U.S. Energy Information Administration (EIA)

Analysis & Projections. Monthly and yearly energy forecasts, analysis of energy topics, financial analysis, Congressional reports. Markets & ...

370

Special Topics and Data Reports  

U.S. Energy Information Administration (EIA) Indexed Site

Commercial Buildings Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Information Administration Home Page Commercial Buildings Web Site. If you need assistance in viewing this page, please call (202) 586-8800 Energy Information Administration Home Page Home > >Commercial Buildings Home > Special Topics and Data Reports Return to: CBECS Home Page 2003 Data Reports: Yellow Arrow Commercial Buildings Characteristics (HTML format) 1999 Data Reports: Yellow Arrow Commercial Buildings Characteristics (HTML format) 1995 Data Reports: Yellow Arrow Commercial Buildings Characteristics, Energy Consumption, and Expenditures (HTML format) Yellow Arrow Commercial Buildings Characteristics (HTML format) Yellow Arrow Commercial Buildings Characteristics (PDF format, 735 KB) Yellow Arrow Energy Consumption and Expenditures (HTML format) 1992 Data Reports: Yellow Arrow Commercial Buildings Characteristics (HTML format)

371

Building Energy Software Tools Directory: CPF Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Related Links CPF Tools CPF Tools logo CPF Tools is the market-leading software for solar installers connecting sales, system design and financing. Screen Shots Keywords...

372

GRAFLAB 2.3 for UNIX - A MATLAB database, plotting, and analysis tool: User`s guide  

SciTech Connect

This report is a user`s manual for GRAFLAB, which is a new database, analysis, and plotting package that has been written entirely in the MATLAB programming language. GRAFLAB is currently used for data reduction, analysis, and archival. GRAFLAB was written to replace GRAFAID, which is a FORTRAN database, analysis, and plotting package that runs on VAX/VMS.

Dunn, W.N.

1998-03-01T23:59:59.000Z

373

Base Technologies and Tools for Supercritical Reservoirs Geothermal Lab  

Open Energy Info (EERE)

Technologies and Tools for Supercritical Reservoirs Geothermal Lab Technologies and Tools for Supercritical Reservoirs Geothermal Lab Call Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Base Technologies and Tools for Supercritical Reservoirs Project Type / Topic 1 Laboratory Call for Submission of Applications for Research, Development and Analysis of Geothermal Technologies Project Type / Topic 2 High-Temperature Downhole Tools Project Description Development of downhole tools capable of reliable operation in supercritical environments is a significant challenge with a number of technical and operational hurdles related to both the hardware and electronics design. Hardware designs require the elimination of all elastomer seals and the use of advanced materials. Electronics must be hardened to the extent practicable since no electronics system can survive supercritical temperatures. To develop systems capable of logging in these environments will require a number of developments. More robust packaging of electronics is needed. Sandia will design and develop innovated, highly integrated, high-temperature (HT) data loggers. These data loggers will be designed and developed using silicon-on-insulator/silicon carbide (SOI/SiC) technologies integrated into a MultiChip Module (MCM); greatly increasing the reliability of the overall system (eliminating hundreds of board-level innerconnects) and decreasing the size of the electronics package. Tools employing these electronics will be capable of operating continuously at temperatures up to 240 °C and by using advanced Dewar flasks, will operate in a supercritical reservoir with temperatures over 450 °C and pressures above 70 MPa. Dewar flasks are needed to protect the electronic components, but those currently available are only reliable in temperature regimes in the range of 350 °C; promising advances in materials will be investigated to improve Dewar technologies. HT wireline currently used for logging operations is compromised at temperatures above 300 °C; along with exploring the development of a HT wireline for logging purposes, alternative approaches that employ HT batteries (e.g., those awarded a recent R&D 100) will also be investigated, and if available will enable deployment using slickline, which is not subject to the same temperature limitations as wireline. To demonstrate the capability provided by these improvements, tools will be developed and fielded. The developed base technologies and working tool designs will be available to industry throughout the project period. The developed techniques and subsystems will help to further the advancement of HT tools needed in the geothermal industry.

374

Building Energy Software Tools Directory: ZIP  

NLE Websites -- All DOE Office Websites (Extended Search)

Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Envelope Systems HVAC Equipment & Systems Lighting Systems Other Applications Tools Listed...

375

Using `core documents' for detecting and labelling new emerging topics  

Science Conference Proceedings (OSTI)

The notion of `core documents', first introduced in the context of co-citation analysis and later re-introduced for bibliographic coupling and extended to hybrid approaches, refers to the representation of the core of a document set according to given ... Keywords: Bibliographic coupling, Core documents, Emerging topics, Hybrid clustering, Text mining

Wolfgang Glänzel; Bart Thijs

2012-05-01T23:59:59.000Z

376

Save Energy at Home Tool | Open Energy Information  

Open Energy Info (EERE)

Save Energy at Home Tool Save Energy at Home Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Save Energy at Home Tool Focus Area: Buildings Topics: Opportunity Assessment & Screening Website: www.energystar.gov/index.cfm?c=products.pr_save_energy_at_home Equivalent URI: cleanenergysolutions.org/content/save-energy-home-tool Language: English Policies: "Deployment Programs,Regulations" is not in the list of possible values (Deployment Programs, Financial Incentives, Regulations) for this property. DeploymentPrograms: Training & Education Regulations: Appliance & Equipment Standards and Required Labeling This U.S. Environmental Protection Agency (EPA) tool assists with understanding where energy is typically consumed within a building and how

377

Policy Analysis System (Polysys) | Open Energy Information  

Open Energy Info (EERE)

Policy Analysis System (Polysys) Policy Analysis System (Polysys) Jump to: navigation, search Tool Summary Name: Policy Analysis System (Polysys) Agency/Company /Organization: Oak Ridge National Laboratory/University of Tennessee Sector: Land Focus Area: Agriculture Phase: Prepare a Plan Topics: Policies/deployment programs Resource Type: Software/modeling tools Website: www.agpolicy.org/polysys.html OpenEI Keyword(s): EERE tool, Policy Analysis System, Polysys Language: English References: Agricultural Policy Analysis Center Research Tools[1] Model U.S. planning decisions at the level of the agricultural statistics district; crop demands and market prices at the national level; and the integrated livestock sector at the national level. Includes fourteen crops and five livestock commodities.

378

Building Energy Software Tools Directory : Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Country Related Links Solar Tool Back to Tool Screenshot for Solar Tool. Screenshot for Solar Tool. Contacts | Web Site Policies | U.S. Department of Energy | USA.gov Content...

379

Policy Analysis Modeling System (PAMS) | Open Energy Information  

Open Energy Info (EERE)

Policy Analysis Modeling System (PAMS) Policy Analysis Modeling System (PAMS) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Policy Analysis Modeling System Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings, Energy Efficiency Topics: Policies/deployment programs Resource Type: Software/modeling tools User Interface: Spreadsheet Website: clasponline.org/ResourcesTools/Tools/PolicyAnalysisModelingSystem Equivalent URI: cleanenergysolutions.org/content/policy-analysis-modeling-system-pams Regulations: "Appliance & Equipment Standards and Required Labeling,Net Metering & Interconnection" is not in the list of possible values (Agriculture Efficiency Requirements, Appliance & Equipment Standards and Required Labeling, Audit Requirements, Building Certification, Building Codes, Cost Recovery/Allocation, Emissions Mitigation Scheme, Emissions Standards, Enabling Legislation, Energy Standards, Feebates, Feed-in Tariffs, Fuel Efficiency Standards, Incandescent Phase-Out, Mandates/Targets, Net Metering & Interconnection, Resource Integration Planning, Safety Standards, Upgrade Requirements, Utility/Electricity Service Costs) for this property.

380

Program Program Organization Country Region Topic Sector Sector  

Open Energy Info (EERE)

Program Organization Country Region Topic Sector Sector Program Organization Country Region Topic Sector Sector Albania Enhancing Capacity for Low Emission Development Strategies EC LEDS Albania Enhancing Capacity for Low Emission Development Strategies EC LEDS United States Agency for International Development USAID United States Environmental Protection Agency United States Department of Energy United States Department of Agriculture United States Department of State Albania Southern Asia Low emission development planning LEDS Energy Land Climate Algeria Clean Technology Fund CTF Algeria Clean Technology Fund CTF African Development Bank Asian Development Bank European Bank for Reconstruction and Development EBRD Inter American Development Bank IDB World Bank Algeria South Eastern Asia Background analysis Finance Implementation

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


381

Software Development, Modeling, and Analysis: We're Developing Advanced Design Tools to Support the Wind Industry with "State-of-the-Art" Analysis Capability (Fact Sheet)  

SciTech Connect

This fact sheet provides an overview of the software development, modeling, and analysis for wind turbine performance, loads, and stabiluty analysis.

2010-01-01T23:59:59.000Z

382

Software Development, Modeling, and Analysis: We're Developing Advanced Design Tools to Support the Wind Industry with "State-of-the-Art" Analysis Capability (Fact Sheet)  

DOE Green Energy (OSTI)

This fact sheet provides an overview of the software development, modeling, and analysis for wind turbine performance, loads, and stabiluty analysis.

Not Available

2010-01-01T23:59:59.000Z

383

Topic Index to the DOE Administrative Records Disposition Schedules...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Topic Index to the DOE Administrative Records Disposition Schedules Topic Index to the DOE Administrative Records Disposition Schedules Topic Index to the DOE Administrative...

384

International Energy Outlook - Special Topics  

Gasoline and Diesel Fuel Update (EIA)

A A Energy Information Administration Forecast Channel. If having trouble viewing this page, contact the National Energy Informaiton Center at (202) 586-8800. Return to Energy Information Administration Home Page Home > Environment> International Energy Outlook> Special Topics International Energy Outlook 2004 Converting Gross Domestic Product for Different Countries to U.S. Dollars: Market Exchange Rates and Purchasing Power Parity Rates The world energy forecasts in IEO2004 are based primarily on projections of GDP for different countries and regions, which for purposes of comparison are expressed in 1997 U.S. dollars. First, GDP projections are prepared for the individual countries in terms of their own national currencies and 1997 prices of goods and services. Then, the projections are converted to 1997 U.S. dollars by applying average 1997 foreign exchange rates between the various national currencies and the dollar. The resulting projections of real GDP are thus based on national 1997 prices in each country and the 1997 market exchange rate (MER) for each currency against the U.S. dollar.

385

TEC Working Group Topic Groups Archives Training - Medical Training |  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Training - Medical Training Training - Medical Training TEC Working Group Topic Groups Archives Training - Medical Training The TEC Training and Medical Training Issues Topic Group was formed to address the training issues for emergency responders in the event of a radioactive material transportation incident. The Topic Group first met in 1996 to assist DOE in developing an approach to address radiological emergency response training needs and to avoid redundancy of existing training materials. The group worked with the Transportation Emergency Preparedness Program (TEPP) to review existing training material to determine its applicability, developed a front-end analysis describing an approach, and developed the Modular Emergency Response Radiological Transportation Training (MERRTT). In 1998, the Medical Training Issues

386

Breakout Items Action Items Fixed Price Contracting Topic Group Summaries  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Albuquerque Meeting - July 1997 Albuquerque Meeting - July 1997 Breakout Items Action Items Fixed Price Contracting Topic Group Summaries TOPIC GROUP SUMMARIES Routing * Group reviewed and approved fourth draft of working paper "Routing Issues Related to U.S. Department of Energy Radioactive Materials Transportation: Discussion and Analysis" * Group submitted working paper and draft list of "Stakeholder Recommendations" to TEC/WG and DOE Group reached consensus on three major routing-related issues: * DOE should develop standardized, cooperative approach to route selection * DOE needs to involve all stakeholders * DOE should submit final version of Group's working paper to other federal entities Future topics for consideration: * routing issues relevant to tribal entities and local jurisdictions

387

RETScreen Clean Energy Project Analysis Software | Open Energy Information  

Open Energy Info (EERE)

RETScreen Clean Energy Project Analysis Software RETScreen Clean Energy Project Analysis Software Jump to: navigation, search Tool Summary Name: RETScreen Clean Energy Project Analysis Software Agency/Company /Organization: Natural Resources Canada Sector: Energy Focus Area: Biomass, - Biomass Combustion, - Biomass Gasification, Buildings, Energy Efficiency, - Central Plant, Geothermal, Greenhouse Gas, Ground Source Heat Pumps, Hydrogen, Solar, - Concentrating Solar Power, - Solar Hot Water, - Solar PV, - Solar Ventilation Preheat, Water Power, Wind Phase: Evaluate Options, Develop Goals, Prepare a Plan Topics: Finance, Market analysis, Pathways analysis, Policies/deployment programs, Resource assessment Resource Type: Software/modeling tools, Workshop User Interface: Desktop Application, Spreadsheet

388

Topic A" Awardee: Western Electricity Coordinating Council |...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

A" Awardee: Western Electricity Coordinating Council Topic A" Awardee: Western Electricity Coordinating Council Regional Transmission Expansion Planning (RTEP) The America Recovery...

389

Special Topics: Environmental Degradation: Web resources  

Science Conference Proceedings (OSTI)

The Hendrix Group - Materials & Corrosion Engineers. Corrosion photos, glossary,case studies, and topical reports, 0, 802, Cathy Rohrer, 10/12/2007 1:54 PM

390

Collaboration Topics - Meshing | National Nuclear Security Administrat...  

National Nuclear Security Administration (NNSA)

& Technology Programs > Office of Advanced Simulation and Computing and Institutional R&D Programs > NNSACEA Cooperation in Computer Science > Collaboration Topics - Meshing...

391

Collaboration Topics - Visualization | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Collaboration Topics - Visualization Home > About Us > Our...

392

Collaboration Topics - System Software | National Nuclear Security...  

National Nuclear Security Administration (NNSA)

Federal Employment Apply for Our Jobs Our Jobs Working at NNSA Blog The National Nuclear Security Administration Collaboration Topics - System Software Home > About Us > Our...

393

Interconnection-Wide Transmission Planning Initiative: Topic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

State Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection Interconnection-Wide Transmission Planning Initiative: Topic B, State Agency...

394

Interconnection-Wide Transmission Planning Initiative: Topic...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Interconnection-Wide Transmission Planning Initiative: Topic B, State Agency Input Regarding Electric Resource and Transmission Planning in the Texas Interconnection...

395

TEC Working Group Topic Groups Security  

Energy.gov (U.S. Department of Energy (DOE))

The Security Topic group is comprised of regulators, law enforcement officials, labor and industry representatives and other subject matter experts concerned with secure transport of spent nuclear...

396

Renewable Energy Project Development: Advanced Concept Topics  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Concept Topics An Introduction to Risk, Tribal Roles, and Support Policies in the Renewable Energy Project Development Process Course Outline What we will cover... About the...

397

Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump  

Open Energy Info (EERE)

Design and Simulation Tool for Hybrid Geothermal Heat Pump Design and Simulation Tool for Hybrid Geothermal Heat Pump System Geothermal Project Jump to: navigation, search Last modified on July 22, 2011. Project Title Development of Design and Simulation Tool for Hybrid Geothermal Heat Pump System Project Type / Topic 1 Recovery Act - Geothermal Technologies Program: Ground Source Heat Pumps Project Type / Topic 2 Topic Area 2: Data Gathering and Analysis Project Description eQUEST is a widely accepted building and HVAC system energy analysis tool (freeware) that is powered with the latest implementation of the DOE-2.2 program. Due to its user-friendly interface and comprehensive capacity for performing building load calculations and HVAC system simulations, eQUEST has been widely used in whole building performance analysis for various purposes, including LEED certification and optimization of building envelop and/or HVAC system designs. In 2006, as a cooperative effort between CM and JJH (the developer of eQUEST), eQUEST capabilities were expanded to include simulation of conventional GHP systems comprised of water-to-air heat pump units, horizontal or vertical ground loop heat exchangers (GLHE), and lakes or wells. However, to date, eQUEST does not model hybrid systems, such as the combination of a fluid cooler in series with a GLHE. Nor is it capable of simulating water-to-water heat pumps coupled to a horizontal or vertical GLHE. As a result, significant opportunities are being missed, as hybrid and/or water-to-water GHP system applications may prove to be a cost effective solution in many situations.

398

Tool Steels  

Science Conference Proceedings (OSTI)

Table 6   Examples of ion implantation in metalforming and cutting applications...tool steel Machining 4140 N 80 3� life Taps HSS Tapping 4140 N 80 3� life HSS Tapping 4130 N 80 5� life HSS Tapping 4140 N 50 10� life M35 Tapping � N 2 200 4� life M7 Tapping � N 100 2� life Cutting blade M2 Cutting 1050 N 100 2� life M2 Cutting SAE 950 N 100 4� life Dies D2 Forming 321 SS N 80...

399

SSHLDA: a semi-supervised hierarchical topic model  

Science Conference Proceedings (OSTI)

Supervised hierarchical topic modeling and unsupervised hierarchical topic modeling are usually used to obtain hierarchical topics, such as hLLDA and hLDA. Supervised hierarchical topic modeling makes heavy use of the information from observed hierarchical ...

Xian-Ling Mao; Zhao-Yan Ming; Tat-Seng Chua; Si Li; Hongfei Yan; Xiaoming Li

2012-07-01T23:59:59.000Z

400

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Conference Call Summaries Rail Topic Group TEC Working Group Topic Groups Rail Conference Call Summaries Rail Topic Group Rail Topic Group May 17, 2007 January 16, 2007 August 31,...

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


401

Home Energy Scoring Tool | Open Energy Information  

Open Energy Info (EERE)

Home Energy Scoring Tool Home Energy Scoring Tool Jump to: navigation, search Tool Summary Name: Home Energy Scoring Tool Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings - Residential Phase: Evaluate Effectiveness and Revise as Needed Topics: Resource assessment Resource Type: Online calculator User Interface: Website Website: www1.eere.energy.gov/buildings/homeenergyscore/ OpenEI Keyword(s): Energy Efficiency and Renewable Energy (EERE) Tools Language: English References: Home Energy Scoring Tool[1] Generate clear and credible home energy assessments; recommend customized upgrades and cost saving tips; compare the energy use of different homes The Home Energy Score allows a homeowner to compare her or his home's energy consumption to that of other homes, similar to a vehicle's

402

Development of a New Analysis Tool for Evaluating and Correcting for Weather Conditions that Constrain Radiation Portal Monitor Performance  

SciTech Connect

Researchers at Oak Ridge National Laboratory (ORNL) developed the Adaptable, Multiplatform, Real-Time Analysis Package (AMRAP) for the continuous measurement of environmental radionuclide decay. AMRAP is a completely open source visualization and analysis package capable of combining a variety of data streams into an array of real-time plots. Once acquired, data streams are analyzed to store static images and extract data based on previously defined thresholds. AMRAP is currently used at ORNL to combine data streams from an Ortec Detective high-purity germanium (HPGe) detector, a TSA Systems radiation portal monitor (RPM), and an Orion weather station. The combined data are used to study the rain-induced increase in RPM background radiation levels. RPMs experience an increase in background radiation during precipitation due to the deposition of atmospheric radionuclides on the ground. Using AMRAP results in a real-time analysis workstation specifically dedicated to the study of RPM background radiation levels. By means of an editable library of common inputs, AMRAP is adaptable to remote monitoring applications that would benefit from the real-time visualization and analysis of radiation measurements. To study rain-induced increases in background radiation levels observed in radiation portal monitors (RPMs), researchers at Oak Ridge National Laboratory (ORNL) developed a software package that allows data with different formats to be analyzed and plotted in near real time. The Adaptable, Multiplatform, Real-Time Analysis Package (AMRAP) was developed to operate in the background and capture plots of important data based on previously defined thresholds. After executing AMRAP, segments of a data stream can be captured without additional post-processing. AMRAP can also display previously recorded data to facilitate a detailed offline analysis. Without access to these capabilities in a single software package, analyzing multiple continuously recorded data streams with different formats is impractical. Commercially available acquisition software packages record and analyze radiation measurements but are not designed to perform real-time analysis in conjunction with data from other vendors. The lack of collaboration between vendors is problematic when research requires different data streams to be correlated in time and immediately analyzed. AMRAP was specifically developed to provide a solution to this problem. AMRAP is a completely open source visualization and analysis package capable of plotting and analyzing data from different vendors in near real time.

Guzzardo, Tyler [ORNL; Livesay, Jake [ORNL

2011-01-01T23:59:59.000Z

403

Materials for Nuclear Power: Digital Resource Center Text Topic  

Science Conference Proceedings (OSTI)

Feb 19, 2007 ... Print this topic. Topic Title WEB RESOURCE: Office of Fusion Energy Sciences, Materials Science Program ...

404

Topic relatedness in evaluative information extraction  

Science Conference Proceedings (OSTI)

The task of extracting opinions/evaluations related to a given topic from a large number of documents such as Web documents is crucial for developing an automatic evaluation finding system, which can handle a wide variety of topics as input. In this ...

Takuya Kawada; Tetsuji Nakagawa; Kentaro Inui; Sadao Kurohashi

2009-12-01T23:59:59.000Z

405

Digital Resource Center Text Topic - TMS  

Science Conference Proceedings (OSTI)

Feb 15, 2007 ... Print this topic. Topic Title Article and Instructional Tutorial: An integrated framework for multi-scale materials simulation and design ... A detailed example is provided for the Al-Cu binary system. CITATION: Z.-K. Liu, L.-Q. Chen ...

406

Topical web crawlers: Evaluating adaptive algorithms  

Science Conference Proceedings (OSTI)

Topical crawlers are increasingly seen as a way to address the scalability limitations of universal search engines, by distributing the crawling process across users, queries, or even client computers. The context available to such crawlers can guide ... Keywords: Efficiency, evaluation, evolution, exploitation, exploration, reinforcement learning, topical crawlers

Filippo Menczer; Gautam Pant; Padmini Srinivasan

2004-11-01T23:59:59.000Z

407

Analyzing entities and topics in news articles using statistical topic models  

Science Conference Proceedings (OSTI)

Statistical language models can learn relationships between topics discussed in a document collection and persons, organizations and places mentioned in each document. We present a novel combination of statistical topic models and named-entity recognizers ...

David Newman; Chaitanya Chemudugunta; Padhraic Smyth; Mark Steyvers

2006-05-01T23:59:59.000Z

408

Energy Performance Certification of Buildings: A Policy Tool to Improve  

Open Energy Info (EERE)

Energy Performance Certification of Buildings: A Policy Tool to Improve Energy Performance Certification of Buildings: A Policy Tool to Improve Energy Efficiency Jump to: navigation, search Tool Summary Name: Energy Performance Certification of Buildings: A Policy Tool to Improve Energy Efficiency Agency/Company /Organization: International Energy Agency Sector: Energy Focus Area: Energy Efficiency, Buildings Topics: Policies/deployment programs Resource Type: Guide/manual, Lessons learned/best practices Website: www.iea.org/papers/pathways/buildings_certification.pdf Energy Performance Certification of Buildings: A Policy Tool to Improve Energy Efficiency Screenshot References: nergy Performance Certification of Buildings[1] Logo: Energy Performance Certification of Buildings: A Policy Tool to Improve Energy Efficiency

409

LDA-Based topic modeling in labeling blog posts with wikipedia entries  

Science Conference Proceedings (OSTI)

Given a search query, most existing search engines simply return a ranked list of search results. However, it is often the case that those search result documents consist of a mixture of documents that are closely related to various contents. In order ... Keywords: LDA, blog, topic analysis, topic model, wikipedia

Daisuke Yokomoto; Kensaku Makita; Hiroko Suzuki; Daichi Koike; Takehito Utsuro; Yasuhide Kawada; Tomohiro Fukuhara

2012-04-01T23:59:59.000Z

410

Twitter and the development of an audience: those who stay on topic thrive!  

Science Conference Proceedings (OSTI)

Although economists have long recognized the importance of a critical mass in growing a community, we know little about how it is achieved. This paper examines how initial topical focus influences communities' ability to attract a critical mass. When ... Keywords: community startup, critical mass, natural language analysis, online communities, social networking sites, topical focus

Yi-Chia Wang; Robert Kraut

2012-05-01T23:59:59.000Z

411

OpenEI/Tool/Keyword EERE tool | Open Energy Information  

Open Energy Info (EERE)

Agent-Based Model + Cost of Renewable Energy Spreadsheet Tool (CREST) + DOE-2 Building Energy Use and Cost Analysis Software + EnergyPlus 7.0 + Facility Energy Decision System +...

412

TASK PLAN: Tribal Issues Topic Group  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Task Plan 1 Tribal Issues Topic Group 7/12/00 Task Plan 1 Tribal Issues Topic Group 7/12/00 Task Plan 1 Page 1 Status: Active DOE Lead: National Transportation Program (NTP-AL; Judith Holm @ 505-845-4767) Start Date: January 1998 End Date: TBD Subject: TEC Topic Group - Tribal Issues rpose: To address issues such as: (1) HM-164 as it relates to Tribes; (2) to complete the Tribal column of the Rail Topic Group Regulatory Matrix; (3) to determine Tribal authority to stop and inspect shipments of radioactive materials; (4) to provide tribal pre-notification of DOE spent fuel shipments consistent with DOE policy and to provide continuous satellite-based tracking and monitoring capability to Tribes; (5) and to address Tribal involvement in transportation planning, training, and funding. The Topic Group

413

Applied Dynamic Analysis of the Global Economy (ADAGE) Model | Open Energy  

Open Energy Info (EERE)

Applied Dynamic Analysis of the Global Economy (ADAGE) Model Applied Dynamic Analysis of the Global Economy (ADAGE) Model Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Applied Dynamic Analysis of the Global Economy (ADAGE) Model Agency/Company /Organization: Research Triangle Institute Sector: Climate, Energy Topics: Co-benefits assessment, - Macroeconomic, Pathways analysis Resource Type: Software/modeling tools User Interface: Desktop Application Complexity/Ease of Use: Advanced Website: www.rti.org/page.cfm?objectid=DDC06637-7973-4B0F-AC46B3C69E09ADA9 RelatedTo: Electricity Markets Analysis (EMA) Model Cost: Paid Applied Dynamic Analysis of the Global Economy (ADAGE) Model Screenshot

414

Software Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Software Tools WINDOW for analyzing window thermal and optical performance THERM for analyzing two-dimensional heat transfer through building products Optics for analyzing optical properties of glazing systems International Glazing Database Optical data for glazing products used by WINDOW 5.2 and Optics5.1 including NFRC approved products Complex Glazing Database A database of shading materials and systems, such as roller shades and venetian blinds, that can be used by WINDOW 6 to calculate thermal and optical characteristics of window products with these shading systems. COMFEN A PC Program for calculating the heating and cooling energy use, and visual and thermal comfort, of commercial building facades. RESFEN A PC program for calculating the heating and cooling energy use of windows in residential buildings

415

Indispensable tool  

SciTech Connect

Synchrotron radiation has become an indispensable research tool for a growing number of scientists in a seemingly ever expanding number of disciplines. We can thank the European Synchrotron Research Facility (ESRF) in Grenoble for taking an innovative step toward achieving the educational goal of explaining the nature and benefits of synchrotron radiation to audiences ranging from the general public (including students) to government officials to scientists who may be unfamiliar with x-ray techniques and synchrotron radiation. ESRF is the driving force behind a new CD-ROM playable on both PCs and Macs titled Synchrotron light to explore matter. Published by Springer-Verlag, the CD contains both English and French versions of a comprehensive overview of the subject.

Robinson, Arthur

2001-08-10T23:59:59.000Z

416

Instrumentation Tools  

E-Print Network (OSTI)

Execution) is a tracing system developed by Larus and Ball which is incorporated as part of the Gnu C compiler [3]. Its goal is to generate very small traces which can be saved and then reused for multiple simulation runs. The modified compiler actually produces two executable programs. The first is the modified application. In addition to normal compilation, the compiler uses the notion of abstract execution to insert tracing code in the application code. Abstract execution is based upon control-flow tracing to reduce the amount of trace code necessary. The resulting trace produced by the modified application is only a tiny part of the full trace. This allows traces representing long execution runs to be saved on disk. The compiler also produces an application specific trace regeneration program. The regeneration program is a post-processing tool which accepts the compacted trace and outputs the full execution trace. The tracing overhead, including the cost of saving the compacted tra...

Jim Pierce; Michael D. Smith; Trevor Mudge

1995-01-01T23:59:59.000Z

417

Innovative and Advanced Coupled Neutron Transport and Thermal Hydraulic Method (Tool) for the Design, Analysis and Optimization of VHTR/NGNP Prismatic Reactors  

SciTech Connect

This project will develop a 3D, advanced coarse mesh transport method (COMET-Hex) for steady- state and transient analyses in advanced very high-temperature reactors (VHTRs). The project will lead to a coupled neutronics and thermal hydraulic (T/H) core simulation tool with fuel depletion capability. The computational tool will be developed in hexagonal geometry, based solely on transport theory without (spatial) homogenization in complicated 3D geometries. In addition to the hexagonal geometry extension, collaborators will concurrently develop three additional capabilities to increase the code’s versatility as an advanced and robust core simulator for VHTRs. First, the project team will develop and implement a depletion method within the core simulator. Second, the team will develop an elementary (proof-of-concept) 1D time-dependent transport method for efficient transient analyses. The third capability will be a thermal hydraulic method coupled to the neutronics transport module for VHTRs. Current advancements in reactor core design are pushing VHTRs toward greater core and fuel heterogeneity to pursue higher burn-ups, efficiently transmute used fuel, maximize energy production, and improve plant economics and safety. As a result, an accurate and efficient neutron transport, with capabilities to treat heterogeneous burnable poison effects, is highly desirable for predicting VHTR neutronics performance. This research project’s primary objective is to advance the state of the art for reactor analysis.

Rahnema, Farzad; Garimeela, Srinivas; Ougouag, Abderrafi; Zhang, Dingkang

2013-11-29T23:59:59.000Z

418

Scaling performance tool MPI communicator management  

Science Conference Proceedings (OSTI)

The Scalasca toolset has successfully demonstrated measurement and analysis scalability on the largest computer systems, however, applications have growing complexity and increasing demands on performance tools. One such application is the PFLOTRAN code ... Keywords: MPI communicators, performance measurement tools, scalability

Markus Geimer; Marc-André Hermanns; Christan Siebert; Felix Wolf; Brian J. N. Wylie

2011-09-01T23:59:59.000Z

419

Optimization of naïve dynamic binary instrumentation Tools/  

E-Print Network (OSTI)

The proliferation of dynamic program analysis tools has done much to ease the burden of developing complex software. However, creating such tools remains a challenge. Dynamic binary instrumentation frameworks such as ...

Kleckner, Reid (Reid N.)

2011-01-01T23:59:59.000Z

420

NETL - Bituminous Baseline Performance and Cost Interactive Tool | Open  

Open Energy Info (EERE)

NETL - Bituminous Baseline Performance and Cost Interactive Tool NETL - Bituminous Baseline Performance and Cost Interactive Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Bituminous Baseline Performance and Cost Interactive Tool Agency/Company /Organization: National Energy Technology Laboratory Sector: Energy Topics: Baseline projection, GHG inventory Resource Type: Software/modeling tools Website: www.netl.doe.gov/energy-analyses/refshelf/results.asp?ptype=Models/Too References: Bituminous Baseline Performance and Cost Interactive Tool [1] Bituminous Baseline Performance and Cost Interactive Tool The Bituminous Baseline Performance and Cost Interactive Tool illustrates key data from the Cost and Performance Baseline for Fossil Energy Plants - Bituminous Coal and Natural Gas to Electricity report. The tool provides an

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


421

Tools for Forest Carbon Inventory, Management, and Reporting | Open Energy  

Open Energy Info (EERE)

Tools for Forest Carbon Inventory, Management, and Reporting Tools for Forest Carbon Inventory, Management, and Reporting Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Tools for Carbon Inventory, Management, and Reporting Agency/Company /Organization: United States Forest Service, United States Department of Agriculture Sector: Land Focus Area: Forestry Topics: GHG inventory, Resource assessment Resource Type: Guide/manual, Lessons learned/best practices, Publications, Training materials, Software/modeling tools User Interface: Desktop Application, Website Website: nrs.fs.fed.us/carbon/tools/ Cost: Free Tools for Carbon Inventory, Management, and Reporting Screenshot References: Carbon Tools[1] Logo: Tools for Carbon Inventory, Management, and Reporting "Accurate estimates of carbon in forests are crucial for forest carbon

422

NETL - World CO2 Emissions - Projected Trends Tool | Open Energy  

Open Energy Info (EERE)

NETL - World CO2 Emissions - Projected Trends Tool NETL - World CO2 Emissions - Projected Trends Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: NETL - World CO2 Emissions - Projected Trends Tool Agency/Company /Organization: National Energy Technology Laboratory Sector: Energy Topics: GHG inventory Resource Type: Software/modeling tools Website: www.netl.doe.gov/energy-analyses/refshelf/results.asp?ptype=Models/Too References: NETL - World CO2 Emissions - Projected Trends Tool [1] NETL - World CO2 Emissions - Projected Trends Tool This interactive tool enables the user to look at both total and power sector CO2 emissions from the use of coal, oil, or natural gas, over the period 1990 to 2030. One can use the tool to compare five of the larger CO2 emitters to each other or to overall world emissions. The data are from the

423

Building Energy Tools Software Directory | Open Energy Information  

Open Energy Info (EERE)

Building Energy Tools Software Directory Building Energy Tools Software Directory Jump to: navigation, search Tool Summary Name: Building Energy Tools Software Directory Agency/Company /Organization: United States Department of Energy Sector: Energy Focus Area: Energy Efficiency, Buildings Phase: Create a Vision, Determine Baseline, Develop Goals Topics: Technology characterizations Resource Type: Dataset, Software/modeling tools User Interface: Website Website: apps1.eere.energy.gov/buildings/tools_directory/ References: http://apps1.eere.energy.gov/buildings/tools_directory/ Logo: Building Energy Tools Software Directory This directory provides information on 388 building software tools for evaluating energy efficiency, renewable energy, and sustainability in buildings. The energy tools listed in this directory include databases,

424

Building Energy Software Tools Directory: Solar Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

Building Energy Software Tools Directory EERE Building Technologies Office Building Energy Software Tools Directory Printable Version Share this resource Home About the...

425

Stone Tool Production  

E-Print Network (OSTI)

by the author. ) Stone Tool Production, Hikade, UEE 2010Short Citation: Hikade 2010, Stone Tool Production. UEE.Thomas, 2010, Stone Tool Production. In Willeke Wendrich (

Hikade, Thomas

2010-01-01T23:59:59.000Z

426

Research topics related to ESI | OpenEI Community  

Open Energy Info (EERE)

Research topics related to ESI Research topics related to ESI Home > Groups > Energy Systems Integration Qinsun's picture Submitted by Qinsun(35) Member 15 November, 2012 - 13:55 ESI MarketsIncentives · Modeling and optimization of multiple energy carriers [2-6] · Renewable generation [3, 7] · Impact of PHEV [8, 9] · Multiple generations (Distributed) (cogeneration; trigeneration) [10-15] · Environmental impact[15-17] · Storage[4] · National Energy System[18] · Cost analysis[19] · Market analysis (supply and demand)[15, 20, 21] · Grid impact [22] · Reliability[23] · Finance[24] · Microgrids · Integration within the power system (DERs) (demand response and storage by Ookie) · Value of energy storage in reserve(Drury, E.; Denholm, P.;

427

Java Vertexing Tools  

SciTech Connect

This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

Strube, Jan; /Oregon U.; Graf, Norman; /SLAC

2006-03-03T23:59:59.000Z

428

TEC Working Group Topic Groups Rail Conference Call Summaries Rail Topic  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Summaries Rail Summaries Rail Topic Group TEC Working Group Topic Groups Rail Conference Call Summaries Rail Topic Group Rail Topic Group May 17, 2007 January 16, 2007 August 31, 2006 July 27, 2006 June 8, 2006 April 20, 2006 March 9, 2006 January 26, 2006 November 9, 2005 September 15, 2005 April 28, 2005 March 24, 2005 February 24, 2005 January 27, 2005 December 16, 2004 October 28, 2004 May 17, 2004 June 2, 2003 June 26, 2002 March 26, 1999 November 13, 1998 Meeting October 6, 1998 Meeting September 11, 1998 Meeting June 22, 1998 Meeting May 27, 1998 Meeting November 3, 1997 Meeting September 18, 1997 Meeting More Documents & Publications TEC Working Group Topic Groups Routing Conference Call Summaries TEC Working Group Topic Groups Rail Meeting Summaries TEC Working Group Topic Groups Rail Conference Call Summaries Inspections

429

Microsoft Word - Chemical Security Assessment Tool.docx  

NLE Websites -- All DOE Office Websites (Extended Search)

Infrastructure Security Analysis Chemical Security Assessment Tool In support of chemical security regulation the Chemical Security Assessment Tool (CSAT) is the Department of...

430

Energy Storage Valuation Tool (ESVT) Version 3.1  

Science Conference Proceedings (OSTI)

The Energy Storage Valuation Tool (ESVT) Version 3.1 is an energy storage cost-benefit analysis simulation tool, based on ...

2013-04-01T23:59:59.000Z

431

User-orientated comparative analysis of climate compatible development  

Open Energy Info (EERE)

User-orientated comparative analysis of climate compatible development User-orientated comparative analysis of climate compatible development planning methodologies and tools Jump to: navigation, search Name User-orientated comparative analysis of climate compatible development planning methodologies and tools Agency/Company /Organization Climate and Development Knowledge Network (CDKN) Sector Energy, Land, Climate Topics Implementation, Low emission development planning, Policies/deployment programs Website http://www.cdkn.org/wp-content Program Start 2011 Program End 2011 References User-orientated comparative analysis of climate compatible development planning methodologies and tools[1] User-orientated comparative analysis of climate compatible development planning methodologies and tools Screenshot In response to demand from a range of practitioners and government

432

Safety - Data/Tools | Data.gov  

NLE Websites -- All DOE Office Websites (Extended Search)

Data/Tools Data/Tools Safety Data/Tools Apps Challenges Resources Blogs Let's Talk Safety You are here Data.gov » Communities » Safety Data and Tools Below is a listing of data sets and tools spanning a variety of important topics in public safety. These data sets are provided to support decision-making as well as inspire new research and application development. This section is updated frequently, so please check back regularly to discover newly released data sets. Search Terms Category -Any- Compliance, Violations, and Enforcement Consumer Complaints Corrections Data Court Data Crime Data Environmental Consequences Exposure Data Fatalities, Casualties, and Injuries Fire Incidents and Crashes Law Enforcement Data Locations and Characteristics Natural Hazards Product Safety Recalls

433

Devonian gas shales bibliography. Topical report  

Science Conference Proceedings (OSTI)

Reports and publications (1983 to May 1991) on Devonian shale research are listed by title. The reports cover topics such as geology, reservoirs, production, drilling technology, and gas yields.

Not Available

1991-05-01T23:59:59.000Z

434

Depleted UF6 Conversion facility EIS Topics  

NLE Websites -- All DOE Office Websites (Extended Search)

Topics Topics Depleted UF6 Conversion Facility EIS Topics A listing of topics included in the Depleted UF6 Conversion Facility EISs. DOE addressed the following environmental issues when assessing the potential environmental impacts of the alternatives in the two site-specific EISs. DOE solicited comment from the Federal agencies, Native American tribes, state and local governments, and the general public on these and any other issues as part of the public scoping process: Potential impacts on health from DUF6 conversion activities, including potential impacts to workers and the public from exposure to radiation and chemicals during routine and accident conditions for the construction, operation, maintenance, and decontamination and decommissioning of DUF6 conversion facilities.

435

TEC Working Group Topic Groups Tribal  

Energy.gov (U.S. Department of Energy (DOE))

The Tribal Topic Group was established in January 1998 to address government-to-government consultation between DOE and Indian Tribes affected by its transportation activities. The group focuses on...

436

Detached shock problem and related topics  

Science Conference Proceedings (OSTI)

A finite difference method for solving the Cauchy or initial value problem for elliptic partial differential equations as introduced in (1) and further developed in (2) will be the principal topic discussed here. Involved in this discussion, also, will ...

H. M. Lieberstein

1959-09-01T23:59:59.000Z

437

A Robust Four-Fluid Transient Flow Simulator as an Analysis and Decision Making Tool for Dynamic Kill Operation  

E-Print Network (OSTI)

The worst scenario of drilling operation is blowout which is uncontrolled flow of formation fluid into the wellbore. Blowouts result in environmental damage with potential risk of injuries and fatalities. Although not all blowouts result in disaster, outcomes of blowouts are unknown and should be studied before starting an operation. Plans should be available to prevent blowouts or provide safe and secure ways of controlling the well before the drilling operation starts. The plan should include procedures in case of any blowout incident as a proactive measure. A few commercial softwares are available in the industry for dynamic kill and transient modeling. All models are proprietary and very complex which reduces the flexibility of the program for specific cases. The purpose of this study is to develop a pseudo transient hydraulic simulator for dynamic kill operations. The idea and concept is to consider the flow of each phase as a single phase flow. The summation of hydrostatic and frictional pressure of each phase determines the bottomhole pressure during the dynamic kill operation. The simulator should be versatile and capable of handling special cases that may encounter during blowouts. Some of the main features of the proposed dynamic kill simulator include; quick and robust simulation, fluid properties are corrected for pressure and temperature, sensitivity analysis can be performed through slide bars, and capable of handling variety of wellbore trajectories. The results from the proposed simulator were compared to the result of commercial software, OLGA ABC. The results were in agreement with each other. It is recommended to apply the simulator for operations with required kill fluid volumes of one to two wellbore volumes.

Haghshenas, Arash

2013-05-01T23:59:59.000Z

438

MSID Products, Tools, & Services  

Science Conference Proceedings (OSTI)

SID Products, Tools, & Services. XML Testbed - collection of XML-Related Tools; Express Engine - STEP (ISO 10303) development ...

2013-09-16T23:59:59.000Z

439

European Commission Impact Assessment Tools | Open Energy Information  

Open Energy Info (EERE)

European Commission Impact Assessment Tools European Commission Impact Assessment Tools Jump to: navigation, search Tool Summary Name: IPTS-IA Tools Agency/Company /Organization: European Commission Joint Research Centre Sector: Energy Topics: Co-benefits assessment Resource Type: Guide/manual, Publications, Software/modeling tools User Interface: Other Website: iatools.jrc.ec.europa.eu/bin/view/IQTool/WebHome.html IPTS-IA Tools Screenshot References: IPTS-IA Tools[1] Overview "IA TOOLS is an online platform that provides Commission policy actors and impact assessment practitioners throughout Europe with a repository of guidance, information and best practices for the impact assessment of new policies and legislative measures. At one click, the IA TOOLS website provides expert and non-expert with guidance on the main steps to be

440

Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) | Open  

Open Energy Info (EERE)

Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) Jump to: navigation, search LEDSGP green logo.png FIND MORE DIA TOOLS This tool is part of the Development Impacts Assessment (DIA) Toolkit from the LEDS Global Partnership. Tool Summary LAUNCH TOOL Name: Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) Agency/Company /Organization: Energy Sector Management Assistance Program of the World Bank Sector: Energy Focus Area: Non-renewable Energy Topics: Baseline projection, Co-benefits assessment, GHG inventory Resource Type: Software/modeling tools User Interface: Spreadsheet Complexity/Ease of Use: Simple Website: www.esmap.org/esmap/EFFECT Cost: Free Equivalent URI: www.esmap.org/esmap/EFFECT Energy Forecasting Framework and Emissions Consensus Tool (EFFECT) Screenshot

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


441

Building Energy Software Tools Directory: OnGrid Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

OnGrid Tool OnGrid Tool The OnGrid Tool is an Excel-based application assisting in PV system sizing, pricing and quoting. It enables solar installers to gather a customerÂ’s utility and site information quickly and efficiently. It calculates optimum system size, electricity bill savings, system incentives, and system net costs. It then calculates various economic benefit factors and produces a variety of proposals, quotes, and. The OnGrid Tool includes rates, incentives, and tax calculations, and estimates system performance, including all performance factors and shading data. Screen Shots Keywords solar, financial, payback, analysis, sales, tool, software, economics, proposal Validation/Testing The software is run through Microsoft Excel and results are available immediately. OnGrid uses the most credible sources for industry updates.

442

Building Energy Software Tools Directory: CBE UFAD Cooling Design Tool  

NLE Websites -- All DOE Office Websites (Extended Search)

CBE UFAD Cooling Design Tool CBE UFAD Cooling Design Tool CBE UFAD Cooling Design Tool logo The Center for the Built Environment's research team has developed a simplified, practical design procedure and associated software tool to determine cooling load requirements of underfloor air distribution (UFAD) systems. These are provided to improve the accuracy of airflow, thermal decay data, thermal comfort calculations, system design, and the operation of UFAD buildings. Screen Shots Keywords UFAD, underfloor, Cooling load calculator, cooling, stratification, thermal comfort Validation/Testing N/A Expertise Required Knowledge about cooling load calculation and UFAD. Users N/A Audience Practicing architects and engineers involved in the design, specification, and analysis of UFADs. Instructional tool in colleges and universities.

443

LEDSGP/Transportation Toolkit/Tools | Open Energy Information  

Open Energy Info (EERE)

Tools Tools < LEDSGP‎ | Transportation Toolkit Jump to: navigation, search LEDSGP Logo.png Transportation Toolkit Home Tools Training Contacts Tools for Low-Emission Development Strategies in Transportation Use one of the search methods below to find tools for building sustainable, low-emission development strategies (LEDS) for your country's transportation system. These resources focus on strategies to limit air pollutants and greenhouse gas emissions. Learn more in the report on LEDS for transportation. Search Method: Category Keyword Choose one or more items from the following categories. Key Actions Implement & Monitor Evaluate System Create Baseline Assess Opportunities Develop Alternatives Prioritize & plan Strategies Resource Types Topics Regions Powered by OpenEI

444

Building Energy Software Tools Directory: Indoor Humidity Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Tools Listed Alphabetically Tools by Platform Tools by Country Related Links Indoor Humidity Tools Indoor Humidity Tools logo. Integrated computer program intended to assist in...

445

Hydrogen Analysis (H2A) | Open Energy Information  

Open Energy Info (EERE)

Hydrogen Analysis (H2A) Hydrogen Analysis (H2A) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Hydrogen Analysis (H2A) Agency/Company /Organization: National Renewable Energy Laboratory Sector: Energy Focus Area: Economic Development Topics: Policies/deployment programs Website: www.nrel.gov/hydrogen/energy_analysis.html#h2a OpenEI Keyword(s): EERE tool Language: English References: H2A Analysis[1] Perform economic analysis of forecourt (distributed) and central hydrogen production systems using various energy resources, including renewables, coal, natural gas, and biomass; calculate the delivered cost of hydrogen for a particular delivery component. H2A, which stands for Hydrogen Analysis, was initiated to better leverage the combined talents and capabilities of analysts working on hydrogen

446

Nucleic Acid Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

Nucleic Acid Tools Nucleic Acid Tools RNA 3D Motif Atlas, a representative collection of RNA 3D internal and hairpin loop motifs. Petrov, A.I., Zirbel, C.L., Leontis, N.B. (2013) Automated classification of RNA 3D motifs and the RNA 3D motif atlas. RNA. Non-redundant List of RNA-containing 3D structures. Leontis, N.B., & Zirbel, C.L. (2012) In Leontis, N. B., Westhof. E. (ed.), RNA 3D structure analysis and prediction. Springer Berlin Heidelberg Vol. 27, pp. 281-298. RNA Base Triple Atlas, a collection of motifs consisting of two RNA basepairs. Abu Almakarem, A.S., Petrov, A.I., Stombaugh, J., Zirbel, C.L. and Leontis, N.B. (2012) Comprehensive survey and geometric classification of base triples in RNA structures. Nucleic Acids Res, 40, 1407-1423. R3D Align, an application for detailed nucleotide to nucleotide

447

Building Energy Software Tools Directory: Umberto  

NLE Websites -- All DOE Office Websites (Extended Search)

Umberto Umberto logo. Software tool for material and energy flow calculation and analysis based on graphical modelling of process systems. It has been developed by ifu (Institute...

448

Building Energy Software Tools Directory: Cepenergy Management...  

NLE Websites -- All DOE Office Websites (Extended Search)

analysis of the Energy Matrix (Electricity, Water, Fuel), and CO2 emissions in buildings. Energy Problems, Saving and Optimizing. Tool of Management for Energy leakage. Culture and...

449

Building Energy Software Tools Directory: Cake Systems  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Share this resource Home About the Directory Tools by Subject Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Other...

450

Building Energy Software Tools Directory: Acoustics Program  

NLE Websites -- All DOE Office Websites (Extended Search)

Printable Version Share this resource Home About the Directory Tools by Subject Whole Building Analysis Codes & Standards Materials, Components, Equipment, & Systems Envelope...

451

Building Energy Software Tools Directory: IWRAPS  

NLE Websites -- All DOE Office Websites (Extended Search)

Atmospheric Pollution Energy Economics Indoor Air Quality Multibuilding Facilities SolarClimate Analysis Training Utility Evaluation Validation Tools VentilationAirflow...

452

TEC Working Group Topic Groups Rail Meeting Summaries | Department of  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Rail Meeting Summaries Rail Meeting Summaries TEC Working Group Topic Groups Rail Meeting Summaries MEETING SUMMARIES Kansas City TEC Meeting, Rail Topic Group Summary - July 25, 2007 Atlanta TEC Meeting, Rail Topic Group Summary - March 6, 2007 Green Bay Meeting, Rail Topic Group Summary - October 26, 2006 Washington DC TEC Meeting, Rail Topic Group Summary - March 15, 2006 Pueblo TEC Meeting, Rail Topic Group Summary - September 22, 2005 Phoenix TEC Meeting, Rail Topic Group Summary - April 4, 2005 Minneapolis TEC Meeting, Rail Topic Group Summary - September 21, 2004 Albuquerque TEC Meeting, Rail Topic Group Summary - April 22, 2004 New Orleans TEC Meeting, Rail Topic Group Summary - January 29, 2002 Jacksonville TEC Meeting, Rail Topic Group Summary - January 20, 1999 Milwaukee TEC Meeting, Rail Topic Group Summary - July 13, 1998

453

TEC Working Group Topic Groups Rail Key Documents | Department...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Draft Rail Topic Group Task Plan Final Rail Topic Group Paper Strawman Report Comments Matrix 2002 Summary of the Rail Topic Group Transportation Safety WIPP-PIG Rail Comparison...

454

Smart Grid Investment Grant Topic Areas | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Grant Topic Areas Smart Grid Investment Grant Topic Areas A description of the topic areas for projects selected for award under the Smart Grid Investment Grant project of the...

455

Property:Geothermal/ProjectTypeTopic2Count | Open Energy Information  

Open Energy Info (EERE)

ProjectTypeTopic2Count ProjectTypeTopic2Count Jump to: navigation, search Property Name Geothermal/ProjectTypeTopic2Count Property Type Number Description Number of Project Type Topic 2 values. Pages using the property "Geothermal/ProjectTypeTopic2Count" Showing 25 pages using this property. (previous 25) (next 25) A Air Cooling + 0 + D Directional Drilling Systems + 0 + Drilling Systems + 2 + E EGS Demonstration + 0 + F Fluid Imaging + 2 + Fracture Characterization Technologies + 0 + G Geophysical Exploration Technologies + 0 + Geothermal Analysis + 0 + Geothermal Data Development, Collection, and Maintenance + 0 + Geothermal Energy Production from Low Temperature Resources, Coproduced Fluids from Oil and Gas Wells, and Geopressured Resources + 0 + H High Temperature Cements + 0 +

456

Assess the Efficacy of an Aerial Distant Observer Tool Capable of Rapid Analysis of Large Sections of Collector Fields: FY 2008 CSP Milestone Report, September 2008  

DOE Green Energy (OSTI)

We assessed the feasibility of developing an aerial Distant Observer optical characterization tool for collector fields in concentrating solar power plants.

Jorgensen, G.; Burkholder, F.; Gray, A.; Wendelin, T.

2009-02-01T23:59:59.000Z

457

TEC/WG Tribal Topic Group  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Tribal Topic Group Conference Call TEC Tribal Topic Group Conference Call January 18, 2006 Group Chair: Jay Jones (DOE/OCRWM) Participating TEC Tribal Topic Group Members: Rob Burnside (CTUIR), Earl Easton (U.S. NRC), Kristen Ellis (DOE/CI), Ed Gonzales (ELG), Angela Hill (DOE/OCRWM), Marsha Keister (INL), Dan King (Oneida Nation), Corinne Macaluso (DOE/OCRWM), Titto Moses (CTUIR), Stanley Paytiamo (Pueblo of Acoma), Willie Preacher (Shoshone-Bannock Tribes), Cathy Reynolds (DOE/GC), Larry Stern (CVSA), Kevin Tafoya (Santa Clara Pueblo), Neil Weber (Pueblo de San Ildefonso), Andrea Wilkins (NCSL), Sarah Wochos (CSG-MW) DOE support contractors also participated in this call. Action Items: Responsible Party Action to be Taken Jay Jones/Corinne Macaluso/ Email and fax 180(c)-related 2006 Federal Register Notices to Tribal

458

TEC Working Group Topic Groups Archives Training - Medical Training...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Meeting Summaries TEC Working Group Topic Groups Archives Training - Medical Training Meeting Summaries Meeting Summaries Philadelphia TEC Meeting, Topic Group Summary - July 1999...

459

Materials for Nuclear Power: Digital Resource Center Text Topic  

Science Conference Proceedings (OSTI)

Print this topic. Topic Title WEB RESOURCE: Nuclear Energy and Global Security Technologies Center. Date Posted: 5/15/2007 2:43 PM Posted By: Lynne ...

460

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TEC Working Group Topic Groups Rail Conference Call Summaries CONFERENCE CALL SUMMARIES Rail Topic Group Inspections Subgroup Planning Subgroup Tracking Subgroup TRAGIS Subgroup...

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


461

TEC Working Group Topic Groups Rail Conference Call Summaries...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

TRAGIS Subgroup TEC Working Group Topic Groups Rail Conference Call Summaries TRAGIS Subgroup TRAGIS Subgroup April 11, 2006 More Documents & Publications TEC Working Group Topic...

462

TEC Working Group Topic Groups Rail Key Documents Intermodal...  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

Intermodal Subgroup TEC Working Group Topic Groups Rail Key Documents Intermodal Subgroup Intermodal Subgroup Draft Work Plan More Documents & Publications TEC Working Group Topic...

463

HSS Focus Group Meeting (Topical Meeting) | Department of Energy  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

HSS Focus Group Meeting (Topical Meeting) HSS Focus Group Meeting (Topical Meeting) Aging Workforce and Strategic Initiatives Meeting Date: November 6, 2008 Documents Available for...

464

Topics in Bayesian sample size determination and Bayesian model selection.  

E-Print Network (OSTI)

??This dissertation contains three topics using the Bayesian paradigm for statistical inference. The first topic is related to Bayesian sample size determination with a misclassified… (more)

Cheng, Dunlei.

2007-01-01T23:59:59.000Z

465

Training and Medical Training Issues Topic Group Meeting Summary  

Energy.gov (U.S. Department of Energy (DOE)) Indexed Site

and Medical Training Issues Topic Group Meeting Summary Philadelphia, PA July 13, 1999 Fire Chief Bill Ruting (La Grange, IL, Fire Department) presented the results of the topic...

466

DOE-2 Building Energy Use and Cost Analysis Software | Open Energy  

Open Energy Info (EERE)

DOE-2 Building Energy Use and Cost Analysis Software DOE-2 Building Energy Use and Cost Analysis Software Jump to: navigation, search Tool Summary LAUNCH TOOL Name: DOE-2 Building Energy Use and Cost Analysis Software Agency/Company /Organization: Lawrence Berkeley National Laboratory Sector: Energy Focus Area: Buildings Phase: Create a Vision Topics: Implementation Resource Type: Software/modeling tools User Interface: Desktop Application Website: doe2.com/ Cost: Free OpenEI Keyword(s): EERE tool, DOE-2 Building Energy Use and Cost Analysis Software References: DOE2 Home Page[1] Perform detailed comparative analysis of building designs and technologies by applying sophisticated building energy use simulation techniques; does not require extensive experience in building performance modeling. DOE-2 is a freeware building energy analysis program that can predict the

467

The Modified Allan Variance as Time-Domain Analysis Tool for Estimating the Hurst Parameter of Long-Range Dependent Traffic  

E-Print Network (OSTI)

Abstract ? Experimental measurements show that Internet traffic exhibits self-similarity and long-range dependence (LRD). A delicate issue is the estimation of traffic statistical quantities that characterize self-similarity and LRD, such as the Hurst parameter H. In this paper, we propose to use the Modified Allan Variance (MAVAR), a well-known time-domain tool originally studied for frequency stability characterization, for estimating the power-law spectrum and thus the H parameter of LRD traffic time series. This novel method is validated by comparison to one of the most widely adopted algorithms for analyzing LRD traffic: the log-scale diagram technique based on wavelet analysis. Both methods are applied to pseudo-random data series, generated with known values of H. MAVAR exhibits outstanding accuracy in estimating H, better than the classical log-scale method. Finally, both techniques are applied to a real IP traffic trace, providing a further example of the capabilities of MAVAR. Index Terms ? Fractals, fractional noise, Internet, long-range dependence, self-similarity, traffic control (communication). Work partialy supported by Ministero dell’Istruzione, dell’Università e della Ricerca (MIUR), Italy, under FIRB project TANGO. I.

Stefano Bregni; Senior Member; Luca Primerano

2004-01-01T23:59:59.000Z

468

Community-Driven Development Decision Tools for Rural Development Programs  

Open Energy Info (EERE)

Community-Driven Development Decision Tools for Rural Development Programs Community-Driven Development Decision Tools for Rural Development Programs Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Community-driven Development Decision Tools for Rural Development Programs Agency/Company /Organization: International Fund for Agricultural Development Topics: Policies/deployment programs Resource Type: Guide/manual, Training materials Website: www.ifad.org/english/cdd/pub/decisiontools.pdf Community-driven Development Decision Tools for Rural Development Programs Screenshot References: Community-Driven Development Decision Tools[1] Overview "The CDD Decision Tools is the final outcome of a series of studies conducted from 2003-08 by IFAD on the CDD activities and approaches it sponsors in a number of countries in Western and Central Africa (WCA). The

469

User-sentiment topic model: refining user's topics with sentiment information  

Science Conference Proceedings (OSTI)

In large social networks, users feel free to share their feelings about anything they are interested in and many research works have focused on modeling users' interests on social network for product recommendations or personal services. Unfortunately, ... Keywords: sentiment detection, topic model, user-sentiment topic model

Tong Zhao; Chunping Li; Qiang Ding; Li Li

2012-08-01T23:59:59.000Z

470

Topic dynamics: an alternative model of bursts in streams of topics  

Science Conference Proceedings (OSTI)

For some time there has been increasing interest in the problem of monitoring the occurrence of topics in a stream of events, such as a stream of news articles. This has led to different models of bursts in these streams, i.e., periods of elevated ... Keywords: burst, hierarchy, momentum, pubmed, topic dynamic

Dan He; D. Stott Parker

2010-07-01T23:59:59.000Z

471

Powerful tool to expand . . .  

E-Print Network (OSTI)

With the extensive inclusion of document, especially text, in the business systems, data mining does not cover the full scope of Business Intelligence. Data mining cannot deliver its impact on extracting useful details from the large collection of unstructured and semi-structured written materials based on natural languages. The most pressing issue is to draw the potential business intelligence from text. In order to gain competitive advantages for the business, it is necessary to develop the new powerful tool, text mining, to expand the scope of business intelligence. In this paper, we will work out the strong points of text mining in extracting business intelligence from huge amount of textual information sources within business systems. We will apply text mining to each stage of Business Intelligence systems to prove that text mining is the powerful tool to expand the scope of BI. After reviewing basic definitions and some related technologies, we will discuss the relationship and the benefits of these to text mining. Some examples and applications of text mining will also be given. The motivation behind is to develop new approach to effective and efficient textual information analysis. Thus we can expand the scope of Business Intelligence using the powerful tool, text mining.

Li Gao; et al.

2005-01-01T23:59:59.000Z

472

Grid reliability management tools  

SciTech Connect

To summarize, Consortium for Electric Reliability Technology Solutions (CERTS) is engaged in a multi-year program of public interest R&D to develop and prototype software tools that will enhance system reliability during the transition to competitive markets. The core philosophy embedded in the design of these tools is the recognition that in the future reliability will be provided through market operations, not the decisions of central planners. Embracing this philosophy calls for tools that: (1) Recognize that the game has moved from modeling machine and engineering analysis to simulating markets to understand the impacts on reliability (and vice versa); (2) Provide real-time data and support information transparency toward enhancing the ability of operators and market participants to quickly grasp, analyze, and act effectively on information; (3) Allow operators, in particular, to measure, monitor, assess, and predict both system performance as well as the performance of market participants; and (4) Allow rapid incorporation of the latest sensing, data communication, computing, visualization, and algorithmic techniques and technologies.

Eto, J.; Martinez, C.; Dyer, J.; Budhraja, V.

2000-10-01T23:59:59.000Z

473

World Bank Good Practice Guidelines: Financial Analysis of Revenue  

Open Energy Info (EERE)

Good Practice Guidelines: Financial Analysis of Revenue Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Jump to: navigation, search Tool Summary Name: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities Agency/Company /Organization: World Bank Topics: Finance Resource Type: Guide/manual Website: siteresources.worldbank.org/INTRANETFINANCIALMGMT/Resources/FMB-Notes/ References: World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities[1] References ↑ "World Bank Good Practice Guidelines: Financial Analysis of Revenue Generating-Entities" Retrieved from "http://en.openei.org/w/index.php?title=World_Bank_Good_Practice_Guidelines:_Financial_Analysis_of_Revenue_Generating-Entities&oldid=329414"

474

Machine Tool Locator  

NLE Websites -- All DOE Office Websites (Extended Search)

gathered and used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. April 18, 2013 machine tool...

475

The power tool  

Science Conference Proceedings (OSTI)

POWER Tool--Planning, Optimization, Waste Estimating and Resourcing tool, a hand-held field estimating unit and relational database software tool for optimizing disassembly and final waste form of contaminated systems and equipment.

HAYFIELD, J.P.

1999-02-01T23:59:59.000Z

476

Building Energy Software Tools Directory: Tools by Country - Canada  

NLE Websites -- All DOE Office Websites (Extended Search)

Canada Canada A C D E F H I M P R S V Tool Applications Free Recently Updated Athena Model life cycle assessment, environment, building materials, buildings Free software. CATALOGUE windows, fenestration, product information, thermal characteristics Free software. DAYSIM annual daylight simulations, electric lighting energy use, lighting controls Free software. Software has been updated. EE4 CBIP whole building performance, building incentives Free software. Software has been updated. EE4 CODE standards and code compliance, whole building energy performance Free software. Software has been updated. Energy Profile Tool benchmarking, energy efficiency screening, end-use energy analysis, building performance analysis, utility programs ENERPASS

477

Building Energy Software Tools Directory: CPF Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

CPF Tools CPF Tools CPF Tools logo CPF Tools is the market-leading software for solar installers connecting sales, system design and financing. Screen Shots Keywords Solar Sales, Quoting Tool, Proposal Tool, Solar Financing, Leads, Auto-Populate, Rebate Form, CRM software, Customer and Financing Dashboard Validation/Testing None Expertise Required Basic understanding of PV. Training is provided through our help site, which features training videos, a user community through Get Satisfaction, and user guides. We also offer live phone support and regular training webinars. Users More than 2,000 Audience Solar professionals, including installers, sales representatives, operations and system design specialists. We also offer a "Channel Manager" version of CPF Tools for manufacturers and distributors.

478

Quark-gluon plasma (Selected Topics)  

SciTech Connect

Introductory lectures to the theory of (strongly interacting) quark-gluon plasma given at the Winter School of Physics of ITEP (Moscow, February 2010). We emphasize theoretical issues highlighted by the discovery of the low viscosity of the plasma. The topics include relativistic hydrodynamics, manifestations of chiral anomaly in hydrodynamics, superfluidity, relativistic superfluid hydrodynamics, effective stringy scalars, holographic models of Yang-Mills theories.

Zakharov, V. I., E-mail: vzakharov@itep.ru [Institute for Theoretical and Experimental Physics (Russian Federation)

2012-09-15T23:59:59.000Z

479

Improving recommendation lists through topic diversification  

Science Conference Proceedings (OSTI)

In this work we present topic diversification, a novel method designed to balance and diversify personalized recommendation lists in order to reflect the user's complete spectrum of interests. Though being detrimental to average accuracy, we show that ... Keywords: accuracy, collaborative filtering, diversification, metrics, recommender systems

Cai-Nicolas Ziegler; Sean M. McNee; Joseph A. Konstan; Georg Lausen

2005-05-01T23:59:59.000Z

480

Annual Meeting 2010 Hot Topics CD Set  

Science Conference Proceedings (OSTI)

For the very first time in AOCS Annual Meeting history, the Hot Topic Symposia presentations (audio synced with PowerPoint presentations) are now available on DVD. You can buy the complete set at this reduced price – or choose to purchase individual

Note: This page contains sample records for the topic "topics analysis tools" from the National Library of EnergyBeta (NLEBeta).
While these samples are representative of the content of NLEBeta,
they are not comprehensive nor are they the most current set.
We encourage you to perform a real-time search of NLEBeta
to obtain the most current and comprehensive results.


481

A Nuclear Iran? Why this particular topic?  

E-Print Network (OSTI)

A Nuclear Iran? #12;#12;Why this particular topic? · State Department internship · Personal · NPT (Nuclear Nonproliferation Treaty) developed after WWII and Japan · IAEA (International Atomic of capacity #12;Iran's nuclear program · Initiated in 1959 · Strong ties to Russia, China and Pakistan · 2002

New Hampshire, University of

482

Building Energy Software Tools Directory: DOE Sponsored Tools  

NLE Websites -- All DOE Office Websites (Extended Search)

DOE Sponsored Tools DOE Sponsored Tools The Department of Energy sponsors continued development of a variety of building energy software tools. See the following for more information about software tools now under development: Whole-Building Energy Performance Simulation EnergyPlus A new-generation building energy simulation program from the creators of BLAST and DOE-2. DOE-2 An hourly, whole-building energy analysis program which calculates energy performance and life-cycle cost of operation. The current version is DOE-2.1E. Building Design Advisor Provides building decision-makers with the energy-related information they need beginning in the initial, schematic phases of building design through the detailed specification of building components and systems. SPARK Models complex building envelopes and mechanical systems that are beyond

483

Renewable Energy Economic and Financial Analysis Terms of Reference | Open  

Open Energy Info (EERE)

Renewable Energy Economic and Financial Analysis Terms of Reference Renewable Energy Economic and Financial Analysis Terms of Reference Jump to: navigation, search Tool Summary Name: Renewable Energy Economic and Financial Analysis Terms of Reference Agency/Company /Organization: World Bank Sector: Energy Focus Area: Renewable Energy Topics: Finance, Implementation, Market analysis Website: web.worldbank.org/WBSITE/EXTERNAL/TOPICS/EXTENERGY2/EXTRENENERGYTK/0,, References: Renewable Energy Economic and Financial Analysis Terms of Reference[1] Resources Techno-Economic Comparison of Off-grid Options -- Assessment of Household, Battery Charging and Isolated Micro-Grid Systems Economic Analysis of Solar PV Systems Component References ↑ "Renewable Energy Economic and Financial Analysis Terms of Reference" Retrieved from

484