National Library of Energy BETA

Sample records for tools a-z index

  1. DOE Research and Development Accomplishments Site Index (A-Z)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    A - Z Index A B C D E F G H I J K L M N O P Q R S T U V W X Y Z A Abrikosov, Alexei Abrikosov, Alexei: Publications activated complex theory of reaction rates adenosine triphosphate AEC Information Retrieval Experiment aerosol, danger of Molina Rowland Agre, Peter Alpha Magnetic Spectrometer (AMS) Alvarez, Luis W. americium Anderson, Carl David anemia angiography angular momentum anisotropy Anti-Jet-Lag-Diet antimatter Chamberlain Fitch antiparticle antiproton Chamberlain Segrè aquaporin

  2. A-Z Link

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Use or Search the A-Z Index (this page) 2. Use search.lbl.gov powered by Google. 3. Use DS The Directory of both People and Organizations Frequently Requested from the A-Z Index...

  3. A-Z Index | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... O (top) Occupational Medicine Office of Performance Assurance On-Target Newsletter Operations, Accelerator Operations Orientation, Accelerator Organizational Charts Oxygen ...

  4. A-Z Index | Jefferson Lab

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Planning Briefs Building Information Business ... Data Acquisition System (CODA) Data Analysis Center (DAC) at GW (SAID) ... Group Directions, Location, & Maps Director's ...

  5. Index

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    WIPP Baseline Tool - 2004 Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools The Environmental Protection Agency (EPA) on May 18, 1998, certified the Waste Isolation Pilot Plant (WIPP), located near Carlsbad, New Mexico, as the nations first geologic repository for the disposal of transuranic (TRU) wastes generated by atomic energy defense activities. The EPA next Recertified the WIPP's continuing

  6. Nuclear Energy Readiness Indicator Index (NERI): A benchmarking tool for assessing nuclear capacity in developing countries

    SciTech Connect (OSTI)

    Saum-Manning,L.

    2008-07-13

    Declining natural resources, rising oil prices, looming climate change and the introduction of nuclear energy partnerships, such as GNEP, have reinvigorated global interest in nuclear energy. The convergence of such issues has prompted countries to move ahead quickly to deal with the challenges that lie ahead. However, developing countries, in particular, often lack the domestic infrastructure and public support needed to implement a nuclear energy program in a safe, secure, and nonproliferation-conscious environment. How might countries become ready for nuclear energy? What is needed is a framework for assessing a country's readiness for nuclear energy. This paper suggests that a Nuclear Energy Readiness Indicator (NERI) Index might serve as a meaningful basis for assessing a country's status in terms of progress toward nuclear energy utilization under appropriate conditions. The NERI Index is a benchmarking tool that measures a country's level of 'readiness' for nonproliferation-conscious nuclear energy development. NERI first identifies 8 key indicators that have been recognized by the International Atomic Energy Agency as key nonproliferation and security milestones to achieve prior to establishing a nuclear energy program. It then measures a country's progress in each of these areas on a 1-5 point scale. In doing so NERI illuminates gaps or underdeveloped areas in a country's nuclear infrastructure with a view to enable stakeholders to prioritize the allocation of resources toward programs and policies supporting international nonproliferation goals through responsible nuclear energy development. On a preliminary basis, the indicators selected include: (1) demonstrated need; (2) expressed political support; (3) participation in nonproliferation and nuclear security treaties, international terrorism conventions, and export and border control arrangements; (4) national nuclear-related legal and regulatory mechanisms; (5) nuclear infrastructure; (6) the

  7. Berkeley Lab Research Review Magazine Index

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Research Review Magazine A-Z Index Search Phone Book Comments Ernest Orlando Lawrence Berkeley National Laboratory Public Information Department News Archive Listing by Subject...

  8. Forest Carbon Index | Open Energy Information

    Open Energy Info (EERE)

    Forest Carbon Index Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Forest Carbon Index AgencyCompany Organization: Resources for the Future Partner: United Nations...

  9. Energy Development Index (EDI) | Open Energy Information

    Open Energy Info (EERE)

    Index (EDI) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Development Index (EDI) AgencyCompany Organization: International Energy Agency (IEA) Sector:...

  10. Project Definition Rating Index Workbook

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Project Definition Rating Index (PDRI) Workbook is a tool that was developed to support DOE G-413.3-12A, U. S. Department of Energy Project Definition Rating Index Guide for Traditional Nuclear...

  11. Low Carbon Economy Index 2010 | Open Energy Information

    Open Energy Info (EERE)

    Economy Index 2010 Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Low Carbon Economy Index 2010 AgencyCompany Organization: PricewaterhouseCoopers Sector: Energy,...

  12. A-Z Index - U.S. Energy Information Administration (EIA)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Number of households Energy use Air pollution abatement equipment Air pollution emissions data Alabama Coal production Weekly Annual Crude oil production Monthly Annual Electricity ...

  13. Applied Parallel Metadata Indexing

    SciTech Connect (OSTI)

    Jacobi, Michael R

    2012-08-01

    The GPFS Archive is parallel archive is a parallel archive used by hundreds of users in the Turquoise collaboration network. It houses 4+ petabytes of data in more than 170 million files. Currently, users must navigate the file system to retrieve their data, requiring them to remember file paths and names. A better solution might allow users to tag data with meaningful labels and searach the archive using standard and user-defined metadata, while maintaining security. last summer, I developed the backend to a tool that adheres to these design goals. The backend works by importing GPFS metadata into a MongoDB cluster, which is then indexed on each attribute. This summer, the author implemented security and developed the user interfae for the search tool. To meet security requirements, each database table is associated with a single user, which only stores records that the user may read, and requires a set of credentials to access. The interface to the search tool is implemented using FUSE (Filesystem in USErspace). FUSE is an intermediate layer that intercepts file system calls and allows the developer to redefine how those calls behave. In the case of this tool, FUSE interfaces with MongoDB to issue queries and populate output. A FUSE implementation is desirable because it allows users to interact with the search tool using commands they are already familiar with. These security and interface additions are essential for a usable product.

  14. ARM - Heat Index Calculations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Study Hall About ARM Global Warming FAQ Just for Fun Meet our Friends Cool Sites Teachers Teachers' Toolbox Lesson Plans Heat Index Calculations Heat Index is an index that ...

  15. Tool calibration system for micromachining system

    DOE Patents [OSTI]

    Miller, Donald M.

    1979-03-06

    A tool calibration system including a tool calibration fixture and a tool height and offset calibration insert for calibrating the position of a tool bit in a micromachining tool system. The tool calibration fixture comprises a yokelike structure having a triangular head, a cavity in the triangular head, and a port which communicates a side of the triangular head with the cavity. Yoke arms integral with the triangular head extend along each side of a tool bar and a tool head of the micromachining tool system. The yoke arms are secured to the tool bar to place the cavity around a tool bit which may be mounted to the end of the tool head. Three linear variable differential transformer's (LVDT) are adjustably mounted in the triangular head along an X axis, a Y axis, and a Z axis. The calibration insert comprises a main base which can be mounted in the tool head of the micromachining tool system in place of a tool holder and a reference projection extending from a front surface of the main base. Reference surfaces of the calibration insert and a reference surface on a tool bar standard length are used to set the three LVDT's of the calibration fixture to the tool reference position. These positions are transferred permanently to a mastering station. The tool calibration fixture is then used to transfer the tool reference position of the mastering station to the tool bit.

  16. Nucleic acid indexing

    DOE Patents [OSTI]

    Guilfoyle, Richard A.; Guo, Zhen

    1999-01-01

    A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

  17. Nucleic acid indexing

    DOE Patents [OSTI]

    Guilfoyle, Richard A.; Guo, Zhen

    2001-01-01

    A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

  18. Project Definition Rating Index (PDRI) | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Definition Rating Index (PDRI) Project Definition Rating Index (PDRI) The Office of Environmental Management (EM) Project Definition Rating Index (EM-PDRI) is a modification of a commercially developed planning tool that has been tested by an EM team specifically for EM's projects. EM-PDRI Team members represent a number of EM sites, and have already used this project planning tool successfully. The EM-PDRI examines a wide range of project factors related to cost, scope, and schedule, and

  19. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head ...

  20. Development Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    More Python Tools Python is an interpreted, general-purpose high-level programming language that is usually accompanied by a variety of useful tools for scientific programming...

  1. Site Index - Hanford Site

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Site Index Site Index Calendar Hanford Blog Archive Search Site Feeds Site Index Weather What's New Site Index Email Email Page | Print Print Page | Text Increase Font Size Decrease Font Size About Us About Hanford Cleanup Regulators, Boards, Councils Hanford Advisory Board Hanford Natural Resource Trustee Council Environmental Protection Agency Washington State Department of Ecology Defense Nuclear Facilities Safety Board Hanford History Hanford Site Wide Programs DOE Human Resources Management

  2. Enrollment Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Enrollment Tools Enrollment Tools A comprehensive benefits package with plan options for health care and retirement to take care of our employees today and tomorrow. Contacts Benefits Office (505) 667-1806 Email Enrollment Tools New Hire Benefits Checklist (pdf) New Hire Enrollment Tool (xls

  3. Electronic Document Master Index

    Energy Science and Technology Software Center (OSTI)

    2003-05-15

    This is a web-based records index search engine. Through a simple or advanced search, users can find data sources and records of interest.

  4. Percussion tool

    DOE Patents [OSTI]

    Reed, Teddy R.

    2006-11-28

    A percussion tool is described and which includes a housing mounting a tool bit; a reciprocally moveable hammer borne by the housing and which is operable to repeatedly strike the tool bit; and a reciprocally moveable piston enclosed within the hammer and which imparts reciprocal movement to the reciprocally moveable hammer.

  5. Omics Tools

    Energy Science and Technology Software Center (OSTI)

    2012-12-21

    The Omics Tools package provides several small trivial tools for work in genomics. This single portable package, the “omics.jar” file, is a toolbox that works in any Java-based environment, including PCs, Macs, and supercomputers. The number of tools is expected to grow. One tool (called cmsearch.hadoop or cmsearch.local), calls the external cmsearch program to predict non-coding RNA in a genome. The cmsearch program is part of the third-party Infernal package. Omics Tools does not containmore » Infernal. Infernal may be installed separately. The cmsearch.hadoop subtool requires Apache Hadoop and runs on a supercomputer, though cmsearch.local does not and runs on a server. Omics Tools does not contain Hadoop. Hadoop mat be installed separartely The other tools (cmgbk, cmgff, fastats, pal, randgrp, randgrpr, randsub) do not interface with third-party tools. Omics Tools is written in Java and Scala programming languages. Invoking the “help” command shows currently available tools, as shown below: schaumbe@gpint06:~/proj/omics$ java -jar omics.jar help Known commands are: cmgbk : compare cmsearch and GenBank Infernal hits cmgff : compare hits among two GFF (version 3) files cmsearch.hadoop : find Infernal hits in a genome, on your supercomputer cmsearch.local : find Infernal hits in a genome, on your workstation fastats : FASTA stats, e.g. # bases, GC content pal : stem-loop motif detection by palindromic sequence search (code stub) randgrp : random subsample without replacement, of groups randgrpr : random subsample with replacement, of groups (fast) randsub : random subsample without replacement, of file lines For more help regarding a particular command, use: java -jar omics.jar command help Usage: java -jar omics.jar command args« less

  6. Research Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software & Tools Development Network R&D Software-Defined Networking (SDN) Experimental Network Testbeds Performance (perfSONAR) Software & Tools Development Data for Researchers Partnerships Publications Workshops Contact Us Technical Assistance: 1 800-33-ESnet (Inside US) 1 800-333-7638 (Inside US) 1 510-486-7600 (Globally) 1 510-486-7607 (Globally) Report Network Problems: trouble@es.net Provide Web Site Feedback: info@es.net Software & Tools Development Over the years, ESnet

  7. Indexes of Consumption and Production

    U.S. Energy Information Administration (EIA) Indexed Site

    and backward-index estimates; that is, the two-way indexed estimate is the weighted average of the estimates obtained by forward and backward indexing, with higher weight...

  8. Software Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software Tools Software Tools Copyright materials are released under different mechanisms: Open Source Software and Portfolio Software. CONTACT thumbnail of Kathleen McDonald Head of Intellectual Property, Business Development Executive Kathleen McDonald Richard P. Feynman Center for Innovation (505) 665-9090 Email The Richard P. Feynman Center for Innovation (FCI) releases copyright materials from Los Alamos under different mechanisms. Open Source Software GitHub Explore all open source

  9. Regulatory Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Regulatory Tools Home CRA - 2004 Final Recertification Decision CRA Comments & Responses CCA - 1996 CRA CARDs & TSDs CCA CARDs & TSDs Regulatory Tools Title 40 CFR Part 191 Environmental Radiation Protection Standards for Management and Disposal of Spent Nuclear Fuel, High-Level and Transuranic Radioactive Wastes. Title 40 CFR Part 194 Criteria for the Certification and Re-Certification of the Waste Isolation Pilot Plant's Compliance With the 40 CFR Part 191 Disposal Regulations.

  10. Fiber optic refractive index monitor

    DOE Patents [OSTI]

    Weiss, Jonathan David

    2002-01-01

    A sensor for measuring the change in refractive index of a liquid uses the lowest critical angle of a normal fiber optic to achieve sensitivity when the index of the liquid is significantly less than the index of the fiber core. Another embodiment uses a liquid filled core to ensure that its index is approximately the same as the liquid being measured.

  11. A z ∼ 5.7 Lyα emission line with an ultrabroad red wing

    SciTech Connect (OSTI)

    Yang, Huan; Wang, JunXian; Zheng, Zhen-Ya; Malhotra, Sangeeta; Rhoads, James E.; Infante, Leopoldo E-mail: jxw@mail.ustc.edu.cn E-mail: smalhotr@asu.edu E-mail: linfante@astro.puc.cl

    2014-03-20

    Using the Lyα emission line as a tracer of high-redshift, star-forming galaxies, hundreds of Lyα emission line galaxies (LAEs) at z > 5 have been detected. These LAEs are considered to be low-mass young galaxies, critical to the re-ionization of the universe and the metal enrichment of the circumgalactic medium (CGM) and the intergalactic medium (IGM). It is assumed that outflows in LAEs can help both ionizing photons and Lyα photons escape from galaxies. However, we still know little about the outflows in high-redshift LAEs due to observational difficulties, especially at redshift >5. Models of Lyα radiative transfer predict asymmetric Lyα line profiles with broad red wings in LAEs with outflows. Here, we report a z ∼ 5.7 Lyα emission line with a broad red wing extending to >1000 km s{sup –1} relative to the peak of Lyα line, which has been detected in only a couple of z > 5 LAEs until now. If the broad red wing is ascribed to gas outflow instead of active galactic nucleus activity, the outflow velocity could be larger than the escape velocity (∼500 km s{sup –1}) of a typical halo mass of z ∼ 5.7 LAEs, which is consistent with the idea that outflows in LAEs disperse metals to CGM and IGM.

  12. Downhole tool

    DOE Patents [OSTI]

    Hall, David R.; Muradov, Andrei; Pixton, David S.; Dahlgren, Scott Steven; Briscoe, Michael A.

    2007-03-20

    A double shouldered downhole tool connection comprises box and pin connections having mating threads intermediate mating primary and secondary shoulders. The connection further comprises a secondary shoulder component retained in the box connection intermediate a floating component and the primary shoulders. The secondary shoulder component and the pin connection cooperate to transfer a portion of makeup load to the box connection. The downhole tool may be selected from the group consisting of drill pipe, drill collars, production pipe, and reamers. The floating component may be selected from the group consisting of electronics modules, generators, gyroscopes, power sources, and stators. The secondary shoulder component may comprises an interface to the box connection selected from the group consisting of radial grooves, axial grooves, tapered grooves, radial protrusions, axial protrusions, tapered protrusions, shoulders, and threads.

  13. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analytical Tools and Data slider_Drill-Rig_Natural-Gas_NETL_2.jpg Analytical Tools and Data Overview NETL has developed a number of analytical tools and databases designed to facilitate fossil fuel utilization and carbon capture and storage (CCS) analyses, including numerical simulators, analytical models, databases, and associated documentation. Search Documents All Analytical Tools and Data

  14. Auto Indexer for Percussive Hammers

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Auto Indexer for Percussive Hammers April 22-25, 2013 This presentation does not contain any proprietary confidential, or otherwise restricted information. Jiann Su, PI Sandia ...

  15. Index Ventures | Open Energy Information

    Open Energy Info (EERE)

    capital firm that invests in companies in the fields of information technology and the life sciences. References: Index Ventures1 This article is a stub. You can help OpenEI...

  16. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    in the Predictive Geosciences competency develop and calibrate efficient tools and quantitative relationships for the science-based prediction of the behavior of...

  17. AIRMaster+ LogTool

    Broader source: Energy.gov [DOE]

    The AIRMaster+ LogTool is a companion tool to AIRMaster+ that helps industrial users determine the operating dynamics of a compressed system. Use the LogTool first to gather critical data in...

  18. Preset pivotal tool holder

    DOE Patents [OSTI]

    Asmanes, Charles

    1979-01-01

    A tool fixture is provided for precise pre-alignment of a radiused edge cutting tool in a tool holder relative to a fixed reference pivot point established on said holder about which the tool holder may be selectively pivoted relative to the fixture base member to change the contact point of the tool cutting edge with a workpiece while maintaining the precise same tool cutting radius relative to the reference pivot point.

  19. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made ...

  20. INDEX

    Office of Environmental Management (EM)

    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 CLAUSE 6 - COST ACCOUNTING STANDARDS (CAS) LIABILITY . . . . . . . . . . . 9 CLAUSE 7 - DISCLOSURE AND USE...

  1. ARM - Metadata Management Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    FormsMetadata Management Tool Ingest Ingest Workflow Graphic Supporting Workflow Documentation Supporting Tools and Forms Process Configuration Manager (PCM) Metadata Management Tool (MMT) ARM Data Integrator (ADI) Ingest Readiness Form Associated Status Reports Contacts Engineering Processes Engineering Home Workflow Graphic Engineering Workflow Document Tools for Workflow ECR ECO BCR Ingests Value-Added Products Reprocessing Instruments Data System Elements Field Campaign Startup Metadata

  2. Lawrence Berkeley Lab Indexing Toolbox

    Energy Science and Technology Software Center (OSTI)

    2003-09-08

    The Lawrence Berkeley Lab Indexing Toolbox is intended to be used in the context of X-ray crystallography experiments involving biological macromolecules. Macromolecules such as proteins form 3-dimensional periodic arrays (crystal) which in turn lead to lattice-like diffraction patterns when the crystal sample is irradiated with collimated X-rays from a synchrotron or other X-ray source. Once the diffraction pattern is captured on an imaging device the next step is to deduce the periodic nature of themore » crystal sample, along with its internal symmetry. this analysis, known as "indexing" is a well-studied problem. However, there are no other implementations designed to operate in an automated setting, in which the human experimentalist is not prosent to manually verify the results of indexing. In particular LABELIT uses three novel algorithms to facilitate automation: a more robust way to verify the position of the incident X-ray beam on the image, a better way to verify that the deduced lattice is consistent with the observed crystal lattice, and new method to deduce the internal symmetry from measurements of the lattice. Moreover, the algorithms are implemented in a Python framework that permits indexing to fail (in rare cases) without crashing the program, thus allowing the software to be incorporated in robotic systems where unattended operation is expected. It will be especially useful for high throughput operations at snychrotron beamlines.« less

  3. Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Tools Tools Below are links to tools that assist users with project planning and analysis. Spectrally Enhanced Lighting Spectrally Enhanced Lighting (SEL) is a cost-effective, low-risk design method for achieving significant energy savings by shifting lamp color from the warmer to the cooler (whiter) end of the color spectrum, more closely matching daylight. Residential Lighting Usage Estimate Tool The Residential Lighting Usage Estimate Tool is a companion to the

  4. Performance and Debugging Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Performance and Debugging Tools NERSC provides many popular debugging and profiling tools. Some of them are general-purpose tools and others are geared toward more specific tasks. A quick guideline on when to use which debugging tool is as follows: DDT and TotalView: general purpose parallel debuggers allowing users to interactively control the pace of execution of a program using a graphical user interface gdb: serial command line mode debugger; can be useful in quickly examining core

  5. Interactive Activity Detection Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Activity Detection Tools Interactive Activity Detection Tools Tools for detecting specified activities in video data provide a key intelligence capability. High numbers of false alarms, however, reduce tool effectiveness and analyst patience. User feedback reduces false alarms * This project will reduce the number of false alarms generated by activity detection tools (including single vehicle start / stop, multi-vehicle meetings and coordinated driving patterns) by exploiting user feedback in a

  6. Laboratory Equipment Donation Program - Site Index

    Office of Scientific and Technical Information (OSTI)

    Site Index Home About Us FAQ Application Contact Us Administrative Login RSS Widget

  7. Improved tool grinding machine

    DOE Patents [OSTI]

    Dial, C.E. Sr.

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thicknesses may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  8. Tool grinding machine

    DOE Patents [OSTI]

    Dial, Sr., Charles E.

    1980-01-01

    The present invention relates to an improved tool grinding mechanism for grinding single point diamond cutting tools to precise roundness and radius specifications. The present invention utilizes a tool holder which is longitudinally displaced with respect to the remainder of the grinding system due to contact of the tool with the grinding surface with this displacement being monitored so that any variation in the grinding of the cutting surface such as caused by crystal orientation or tool thickness may be compensated for during the grinding operation to assure the attainment of the desired cutting tool face specifications.

  9. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    index Below are links to Carbon Storage Program documents and reference materials. Each of the 10 categories has a variety of documents posted for easy access to current information - just click on the category link to view all related materials. cs-ref-shelf-3.jpg The Carbon Storage Newsletter Subscribe to Newsletter Newsletter Archive Carbon Storage Educational Resources Atlas V - Whole Document (Sept 2015) [PDF] The North American Carbon Storage Atlas 2012 [PDF] Atlas IV - Whole Document (Dec

  10. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Euclid that is managed by modules. Package Category Version Module Install Date Date Made Default Last edited: 2016-03-21 13:44:4

  11. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govDataData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by ...

  12. ARM - Data Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    govData Tools Data Tools Software for Working with ARM NetCDF Data Most ARM data are archived and made available as time-series data in netCDF format. NetCDF (designed by Unidata) ...

  13. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, Conrad F. (Los Alamos, NM)

    1981-01-01

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  14. Caliper and contour tool

    DOE Patents [OSTI]

    Fink, C.F.

    The disclosure relates to a tool for borehole logging comprising a plurality of extendable caliper arms to determine borehole contour.

  15. Demand Response Dispatch Tool

    SciTech Connect (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for both reliability and economic conditions.

  16. OOTW COST TOOLS

    SciTech Connect (OSTI)

    HARTLEY, D.S.III; PACKARD, S.L.

    1998-09-01

    This document reports the results of a study of cost tools to support the analysis of Operations Other Than War (OOTW). It recommends the continued development of the Department of Defense (DoD) Contingency Operational Support Tool (COST) as the basic cost analysis tool for 00TWS. It also recommends modifications to be included in future versions of COST and the development of an 00TW mission planning tool to supply valid input for costing.

  17. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    2000-01-01

    A fluid-sampling tool for obtaining a fluid sample from a container. When used in combination with a rotatable drill, the tool bores a hole into a container wall, withdraws a fluid sample from the container, and seals the borehole. The tool collects fluid sample without exposing the operator or the environment to the fluid or to wall shavings from the container.

  18. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Innovative Energy Concepts Innovative Process Technologies is concerned with the development of innovative cost-effective technologies that promote efficiency, environmental performance, availability of advanced energy systems, and the development of computational tools that shorten development timelines of advanced energy systems. NETL, working with stakeholder to focus on these research tasks: Advanced Power Generation Concepts Power Electronics and Energetic Materials Impacts and Benefits The

  19. Tool setting device

    DOE Patents [OSTI]

    Brown, Raymond J.

    1977-01-01

    The present invention relates to a tool setting device for use with numerically controlled machine tools, such as lathes and milling machines. A reference position of the machine tool relative to the workpiece along both the X and Y axes is utilized by the control circuit for driving the tool through its program. This reference position is determined for both axes by displacing a single linear variable displacement transducer (LVDT) with the machine tool through a T-shaped pivotal bar. The use of the T-shaped bar allows the cutting tool to be moved sequentially in the X or Y direction for indicating the actual position of the machine tool relative to the predetermined desired position in the numerical control circuit by using a single LVDT.

  20. Weekly Natural Gas Storage Report Schedule

    U.S. Energy Information Administration (EIA) Indexed Site

    Environment Markets & Finance Today in Energy Geography States Countries Maps Tools A-Z Index All Reports & Publications EIA Survey Forms Policies PrivacySecurity Copyright &...

  1. Ardour Global Indexes LLC | Open Energy Information

    Open Energy Info (EERE)

    Name: Ardour Global Indexes LLC Place: New York City, New York Zip: 10016 Product: New-York based company that manages the Ardour Global Indexes, a set of alternative energy...

  2. Measurement of the production cross sections for a Z boson and one or more b jets in pp collisions at sqrt(s) = 7 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chatrchyan, Serguei

    2014-02-06

    The production of a Z boson, decaying into two leptons and produced in association with one or more b jets, is studied using proton-proton collisions delivered by the LHC at a centre-of-mass energy of 7 TeV. The data were recorded in 2011 with the CMS detector and correspond to an integrated luminosity of 5 fb-1. The Z(ℓℓ) + b-jets cross sections (where ℓℓ = μμ or ee) are measured separately for a Z boson produced with exactly one b jet and with at least two b jets. In addition, a cross section ratio is extracted for a Z boson producedmore » with at least one b jet, relative to a Z boson produced with at least one jet. The measured cross sections are compared to various theoretical predictions, and the data favour the predictions in the five-flavour scheme, where b quarks are assumed massless. The kinematic properties of the reconstructed particles are compared with the predictions from the MadGraph event generator using the pythia parton shower simulation.« less

  3. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    High Performance Materials High-Performance Materials focuses on structural and functional materials that will lower the cost and improve the performance of fossil-based power-generation systems. Computational tools to support predictive performance, failure mechanisms, and molecular design of materials are also under development to support highly focused efforts in material development. Projects generally are initiated with a computational task to demonstrate a discovery and design methodology

  4. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis Focus Area slider_Power-Plant_NETL.jpg Analysis Focus Areas Overview NETL's expertise in Fossil Energy allows the energy analysis team to focus on these technological, economical, and environmental areas in the development of baseline studies, life cycle analyses, analytical tools, and quality guidelines. NETL analysts use economic models to forecast the market penetration of advanced energy systems for a variety of possible futures. The associated benefits are quantified in terms of

  5. index | netl.doe.gov

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Search Publications Energy Analysis Home Page About Energy Analysis Search Publications Analytical Tools and Data Baseline Studies Life Cycle Analysis Quality Guidelines Technology Focus Area Analysis Focus Area SEARCH PUBLICATIONS Welcome to the Energy Analysis Search Publications page. Energy Analysis related publications can be found in this repository. To get started, begin filtering publications by using the quick filter links or search all publications using the search box below. Search

  6. Index2.doc | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Index2.doc Index2.doc Index2.doc (11.46 KB) More Documents & Publications Sylvania Corporation, Hicksville, NY and Bayside, NY - Addendum to July 8, 2004 O:\HOMEPAGE\FOIA\report99.PDF� U.S. Department of Energy 2004 Annual Report

  7. Alternative Fuels Data Center: Tools

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Tools to someone by E-mail Share Alternative Fuels Data Center: Tools on Facebook Tweet about Alternative Fuels Data Center: Tools on Twitter Bookmark Alternative Fuels Data Center: Tools on Google Bookmark Alternative Fuels Data Center: Tools on Delicious Rank Alternative Fuels Data Center: Tools on Digg Find More places to share Alternative Fuels Data Center: Tools on AddThis.com... Tools The Alternative Fuels Data Center offers a large collection of helpful tools. These calculators,

  8. Machine tool locator

    DOE Patents [OSTI]

    Hanlon, John A.; Gill, Timothy J.

    2001-01-01

    Machine tools can be accurately measured and positioned on manufacturing machines within very small tolerances by use of an autocollimator on a 3-axis mount on a manufacturing machine and positioned so as to focus on a reference tooling ball or a machine tool, a digital camera connected to the viewing end of the autocollimator, and a marker and measure generator for receiving digital images from the camera, then displaying or measuring distances between the projection reticle and the reference reticle on the monitoring screen, and relating the distances to the actual position of the autocollimator relative to the reference tooling ball. The images and measurements are used to set the position of the machine tool and to measure the size and shape of the machine tool tip, and examine cutting edge wear. patent

  9. Wachs Cutter Tooling Station (4495)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    purchase, build and install Wachs cutter tooling. The Wachs Cutter Tooling Station is similar to previously operated facility tooling and will utilize an existing hydraulic unit....

  10. Software Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Windows and Building Envelope » Software Tools Software Tools See past projects. Fenestration Software Tools Lead Performer: Lawrence Berkeley National Laboratory - Berkeley, CA

  11. HPC_Tools.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    5, 2011 * Introduction * Debugging * Performance / Optimization Outline 3 * Scope of Today's Talks - Debugging and optimization tools - Some basic strategies * Take Aways - Common problems and strategies - How tools work in general - A few specific tools you can try Introduction 4 * Types of problems - "Serial" * Invalid memory references * Array reference out of bounds * Divide by zero * Uninitialized variables - Parallel * Unmatched sends/receives * Blocking receive before

  12. Demand Response Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be usedmore » by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.« less

  13. Lustre Administrative Tool

    Energy Science and Technology Software Center (OSTI)

    2003-12-24

    The Lustre Administrative Tools (LAT) is a set of programs and utilities designed to facilitate management of the Lustre File System by System Administrators.

  14. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1983-12-27

    A tool guide is described that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into the cross pipe for cleaning, inspection, etc. 3 figs.

  15. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, Aleksandar

    1983-12-27

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  16. Demand Response Dispatch Tool

    Energy Science and Technology Software Center (OSTI)

    2012-08-31

    The Demand Response (DR) Dispatch Tool uses price profiles to dispatch demand response resources and create load modifying profiles. These annual profiles are used as inputs to production cost models and regional planning tools (e.g., PROMOD). The tool has been effectively implemented in transmission planning studies conducted by the Western Electricity Coordinating Council via its Transmission Expansion Planning and Policy Committee. The DR Dispatch Tool can properly model the dispatch of DR resources for bothmore » reliability and economic conditions.« less

  17. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, Fred N.; Murry, Kenneth R.

    1988-12-27

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting edges formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first cutting edge tip to the axis of rotation plus the distance from the second cutting edge tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second cutting edge tip to the axis of rotation minus one-half the distance from the first cutting edge tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  18. Double diameter boring tool

    DOE Patents [OSTI]

    Ashbaugh, F.A.; Murry, K.R.

    1986-02-10

    A boring tool and a method of operation are provided for boring two concentric holes of precision diameters and depths in a single operation. The boring tool includes an elongated tool body, a shank for attachment to a standard adjustable boring head which is used on a manual or numerical control milling machine and first and second diametrically opposed cutting flutes formed for cutting in opposite directions. The diameter of the elongated tool body is substantially equal to the distance from the first flute tip to the axis of rotation plus the distance from the second flute tip to the axis of rotation. The axis of rotation of the tool is spaced from the tool centerline a distance substantially equal to one-half the distance from the second flute tip to the axis of rotation minus one-half the distance from the first flute tip to the axis of rotation. The method includes the step of inserting the boring tool into the boring head, adjusting the distance between the tool centerline and the tool axis of rotation as described above and boring the two concentric holes.

  19. Air Sparging Decision Tool

    Energy Science and Technology Software Center (OSTI)

    1996-06-10

    The Air Sparging Decision Tool is a computer decision aid to help environmental managers and field practitioners in evaluating the applicability of air sparging to a wide range of sites and for refining the operation of air sparging systems. The program provides tools for the practitioner to develop the conceptual design for an air sparging system suitable for the identified site. The Tool provides a model of the decision making process, not a detailed designmore » of air sparging systems. The Tool will quickly and cost effectively assist the practitioner in screening for applicability of the technology at a proposed site.« less

  20. lustre-tools-llnl

    Energy Science and Technology Software Center (OSTI)

    2010-12-17

    lustre-tools-llnl is a small set of commands that are helpful for using and administering a lustre file system.

  1. Demand Response Analysis Tool

    SciTech Connect (OSTI)

    2012-03-01

    Demand Response Analysis Tool is a software developed at the Lawrence Berkeley National Laboratory. It is initially funded by Southern California Edison. Our goal in developing this tool is to provide an online, useable, with standardized methods, an analysis tool to evaluate demand and demand response performance of commercial and industrial facilities. The tool provides load variability and weather sensitivity analysis capabilities as well as development of various types of baselines. It can be used by researchers, real estate management firms, utilities, or any individuals who are interested in analyzing their demand and demand response capabilities.

  2. Tools for Public Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    including Intellus, an online tool that provides transparency and accessibility to the environmental monitoring data from in and around Los Alamos National Laboratory. August 1,...

  3. EE Maximization Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    News & Events Skip navigation links Marketing Resources Reports, Publications, and Research Utility Toolkit Utility Potential Calculator EE Maximization Tool Conduit Utility...

  4. AIRMaster+ Tool Introduction

    Broader source: Energy.gov [DOE]

    This presentation discusses typical compressed air system operation and discusses methods of system efficiency improvement through use of the AIRMaster+ and CAC LogTool software.

  5. Strain gauge installation tool

    DOE Patents [OSTI]

    Conard, Lisa Marie

    1998-01-01

    A tool and a method for attaching a strain gauge to a test specimen by maaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool.

  6. Manifold tool guide

    DOE Patents [OSTI]

    Djordjevic, A.

    1982-07-08

    A tool guide that makes possible the insertion of cleaning and/or inspection tools into a manifold pipe that will dislocate and extract the accumulated sediment in such manifold pipes. The tool guide basically comprises a right angled tube (or other angled tube as required) which can be inserted in a large tube and locked into a radially extending cross pipe by adjustable spacer rods and a spring-loaded cone, whereby appropriate cleaning tools can be inserted into to cross pipe for cleaning, inspection, etc.

  7. Locking mechanism for indexing device

    DOE Patents [OSTI]

    Lindemeyer, Carl W. (Aurora, IL)

    1984-01-01

    Disclosed is a locking mechanism for an indexing spindle. A conventional r gear having outwardly extending teeth is affixed to the spindle. Also included is a rotatably mounted camshaft whose axis is arranged in skewed relationship with the axis of the spindle. A disk-like wedge having opposing camming surfaces is eccentrically mounted on the camshaft. As the camshaft is rotated, the camming surfaces of the disc-like member are interposed between adjacent gear teeth with a wiping action that wedges the disc-like member between the gear teeth. A zero backlash engagement between disc-like member and gear results, with the engagement having a high mechanical advantage so as to effectively lock the spindle against bidirectional rotation.

  8. DOE - Office of Legacy Management -- Transcontinental Machine and Tool Co -

    Office of Legacy Management (LM)

    US 06 Transcontinental Machine and Tool Co - US 06 Site ID (CSD Index Number): US.06 Site Name: TRANSCONTINENTAL MACHINE AND TOOL CO. Site Summary: Site Link: External Site Link: Alternate Name(s): None Alternate Name Documents: Location: New York, New York Location Documents: Historical Operations (describe contaminants): Metal Fabrication operations - Machined Uranium slugs in support of Savannah River program for evaluation of Uranium fabrication methods. Historical Operations Documents:

  9. Fluid sampling tool

    DOE Patents [OSTI]

    Johnston, Roger G.; Garcia, Anthony R. E.; Martinez, Ronald K.

    2001-09-25

    The invention includes a rotatable tool for collecting fluid through the wall of a container. The tool includes a fluid collection section with a cylindrical shank having an end portion for drilling a hole in the container wall when the tool is rotated, and a threaded portion for tapping the hole in the container wall. A passageway in the shank in communication with at least one radial inlet hole in the drilling end and an opening at the end of the shank is adapted to receive fluid from the container. The tool also includes a cylindrical chamber affixed to the end of the shank opposite to the drilling portion thereof for receiving and storing fluid passing through the passageway. The tool also includes a flexible, deformable gasket that provides a fluid-tight chamber to confine kerf generated during the drilling and tapping of the hole. The invention also includes a fluid extractor section for extracting fluid samples from the fluid collecting section.

  10. OOTW Force Design Tools

    SciTech Connect (OSTI)

    Bell, R.E.; Hartley, D.S.III; Packard, S.L.

    1999-05-01

    This report documents refined requirements for tools to aid the process of force design in Operations Other Than War (OOTWs). It recommends actions for the creation of one tool and work on other tools relating to mission planning. It also identifies the governmental agencies and commands with interests in each tool, from whom should come the user advisory groups overseeing the respective tool development activities. The understanding of OOTWs and their analytical support requirements has matured to the point where action can be taken in three areas: force design, collaborative analysis, and impact analysis. While the nature of the action and the length of time before complete results can be expected depends on the area, in each case the action should begin immediately. Force design for OOTWs is not a technically difficult process. Like force design for combat operations, it is a process of matching the capabilities of forces against the specified and implied tasks of the operation, considering the constraints of logistics, transport and force availabilities. However, there is a critical difference that restricts the usefulness of combat force design tools for OOTWs: the combat tools are built to infer non-combat capability requirements from combat capability requirements and cannot reverse the direction of the inference, as is required for OOTWs. Recently, OOTWs have played a larger role in force assessment, system effectiveness and tradeoff analysis, and concept and doctrine development and analysis. In the first Quadrennial Defense Review (QDR), each of the Services created its own OOTW force design tool. Unfortunately, the tools address different parts of the problem and do not coordinate the use of competing capabilities. These tools satisfied the immediate requirements of the QDR, but do not provide a long-term cost-effective solution.

  11. Auto Indexer Auto-Indexer for Percussive Hammers: Vane Motor Dynamometer Testing

    DOE Data Explorer [Office of Scientific and Technical Information (OSTI)]

    Su, Jiann

    2012-01-01

    Objectives Options associated with geothermal drilling operations are generally limited by factors such as formation temperature and rock strength. The objective of the research is to expand the "tool box" available to the geothermal driller by furthering the development of a high-temperature drilling motor that can be used in directional drilling applications for drilling high temperature geothermal formations. The motor is specifically designed to operate in conjunction with a pneumatic down-the-hole-hammer. It provides a more compact design compared to traditional drilling motors such as PDMs (positive displacement motors). The packaging can help to enhance directional drilling capabilities. It uses no elastomeric components, which enables it to operate in higher temperatures ( >250 °F). Current work on the motor has shown that is a capable of operating under pneumatic power with a down-the-hole-hammer. Further development work will include continued testing and refining motor components and evaluating motor capabilities. Targets/Milestones Complete testing current motor - 12/31/2010 Make final material and design decisions - 01/31/2011 Build and test final prototype - 04/31/2011 Final demonstration - 07/31/2011 Impacts The development of the motor will help to achieve program technical objectives by improving well construction capabilities. This includes enabling high-temperature drilling as well as enhancing directional drilling. A key component in the auto indexer is the drive motor. It is an air-driven vane motor that converts the energy stored in the compressed air to mechanical energy. The motor is attached to hammer-like components which impart an impulsive load onto the drive shaft. The impulsive force on the drive shaft in turn creates an indexing action. A controlled test was performed to characterize the performance of the the vane motor for a given pressure. The Sandia dynamometer test station was used to determine the performance of the motor for a

  12. Eclipse Parallel Tools Platform

    Energy Science and Technology Software Center (OSTI)

    2005-02-18

    Designing and developing parallel programs is an inherently complex task. Developers must choose from the many parallel architectures and programming paradigms that are available, and face a plethora of tools that are required to execute, debug, and analyze parallel programs i these environments. Few, if any, of these tools provide any degree of integration, or indeed any commonality in their user interfaces at all. This further complicates the parallel developer's task, hampering software engineering practices,more » and ultimately reducing productivity. One consequence of this complexity is that best practice in parallel application development has not advanced to the same degree as more traditional programming methodologies. The result is that there is currently no open-source, industry-strength platform that provides a highly integrated environment specifically designed for parallel application development. Eclipse is a universal tool-hosting platform that is designed to providing a robust, full-featured, commercial-quality, industry platform for the development of highly integrated tools. It provides a wide range of core services for tool integration that allow tool producers to concentrate on their tool technology rather than on platform specific issues. The Eclipse Integrated Development Environment is an open-source project that is supported by over 70 organizations, including IBM, Intel and HP. The Eclipse Parallel Tools Platform (PTP) plug-in extends the Eclipse framwork by providing support for a rich set of parallel programming languages and paradigms, and a core infrastructure for the integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration of a wide variety of parallel tools. The first version of the PTP is a prototype that only provides minimal functionality for parallel tool integration, support for a small number of parallel architectures

  13. Image indexing using color correlograms

    DOE Patents [OSTI]

    Huang, Jing; Kumar, Shanmugasundaram Ravi; Mitra, Mandar; Zhu, Wei-Jing

    2001-01-01

    A color correlogram is a three-dimensional table indexed by color and distance between pixels which expresses how the spatial correlation of color changes with distance in a stored image. The color correlogram may be used to distinguish an image from other images in a database. To create a color correlogram, the colors in the image are quantized into m color values, c.sub.i . . . c.sub.m. Also, the distance values k.epsilon.[d] to be used in the correlogram are determined where [d] is the set of distances between pixels in the image, and where dmax is the maximum distance measurement between pixels in the image. Each entry (i, j, k) in the table is the probability of finding a pixel of color c.sub.i at a selected distance k from a pixel of color c.sub.i. A color autocorrelogram, which is a restricted version of the color correlogram that considers color pairs of the form (i,i) only, may also be used to identify an image.

  14. Topic Index to the DOE Administrative Records Disposition Schedules...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Topic Index to the DOE Administrative Records Disposition Schedules Topic Index to the DOE Administrative Records Disposition Schedules Topic Index to the DOE Administrative...

  15. Graphitic packing removal tool

    DOE Patents [OSTI]

    Meyers, Kurt Edward; Kolsun, George J.

    1997-01-01

    Graphitic packing removal tools for removal of the seal rings in one piece. he packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal.

  16. Graphitic packing removal tool

    DOE Patents [OSTI]

    Meyers, K.E.; Kolsun, G.J.

    1997-11-11

    Graphitic packing removal tools for removal of the seal rings in one piece are disclosed. The packing removal tool has a cylindrical base ring the same size as the packing ring with a surface finish, perforations, knurling or threads for adhesion to the seal ring. Elongated leg shanks are mounted axially along the circumferential center. A slit or slits permit insertion around shafts. A removal tool follower stabilizes the upper portion of the legs to allow a spanner wrench to be used for insertion and removal. 5 figs.

  17. Other Workflow Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    This includes other tools in the workflow ecosystem as well as auxiliary services to ... In addition to MapReduce and a dsitributed File System (HDFS), Hadoop has a rich ecosystem ...

  18. Smart tool holder

    DOE Patents [OSTI]

    Day, Robert Dean; Foreman, Larry R.; Hatch, Douglas J.; Meadows, Mark S.

    1998-01-01

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut.

  19. Energy Development Assistance Tool

    Broader source: Energy.gov [DOE]

    The Federal Energy Development Assistance tool provides information for Tribes about federal grant, loan, and technical assistance programs to support energy development and deployment in Indian Country and Alaska Native villages.

  20. Oracle Management Tool Suite

    Energy Science and Technology Software Center (OSTI)

    2007-06-01

    The Oracle Management Tool Suite is used to automatically manage Oracle based systems. This includes startup and shutdown of databases and application servers as well as backup, space management, workload management and log file management.

  1. Lustre Monitoring Tools

    Energy Science and Technology Software Center (OSTI)

    2007-05-05

    The Lustre Monitoring Tools software package is a set of utilities developed to facilitate real-time and historical monitoring of the performance of a Lustre FileSystem.

  2. UNIX Public Tools

    Office of Energy Efficiency and Renewable Energy (EERE)

    SATAN, the System Administrator Tool for Analyzing Networks, is a network security analyzer designed by Dan Farmer and Wietse Venema. SATAN scans systems connected to the network noting the...

  3. PV Hourly Simulation Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    This software requires inputs of simple general building characteristics and usage information to calculate the energy and cost benefits of solar PV. This tool conducts and complex hourly simulation of solar PV based primarily on the area available on the rooftop. It uses a simplified efficiency calculation method and real panel characteristics. It includes a detailed rate structure to account for time-of-use rates, on-peak and off-peak pricing, and multiple rate seasons. This tool includes themore » option for advanced system design inputs if they are known. This tool calculates energy savings, demand reduction, cost savings, incentives and building life cycle costs including: simple payback, discounted payback, net-present value, and savings to investment ratio. In addition this tool also displays the environmental benefits of a project.« less

  4. Friction stir welding tool

    DOE Patents [OSTI]

    Tolle, Charles R.; Clark, Denis E.; Barnes, Timothy A.

    2008-04-15

    A friction stir welding tool is described and which includes a shank portion; a shoulder portion which is releasably engageable with the shank portion; and a pin which is releasably engageable with the shoulder portion.

  5. Strain gauge installation tool

    DOE Patents [OSTI]

    Conard, L.M.

    1998-06-16

    A tool and a method are disclosed for attaching a strain gauge to a test specimen by maintaining alignment of, and applying pressure to, the strain gauge during the bonding of the gauge to the specimen. The tool comprises rigid and compliant pads attached to a spring-loaded clamp. The pads are shaped to conform to the specimen surface to which the gauge is to be bonded. The shape of the pads permits the tool to align itself to the specimen and to maintain alignment of the gauge to the specimen during the bond curing process. A simplified method of attaching a strain gauge is provided by use of the tool. 6 figs.

  6. Device Simulation Tool - JCAP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    PAZ0036_v2.jpg Device Simulation Tool Research Why Solar Fuels Goals & Objectives Thrust 1 Thrust 2 Thrust 3 Thrust 4 Publications Research Highlights Videos Innovations User Facilities Expert Team Benchmarking Database Device Simulation Tool XPS Spectral Database Research Introduction Why Solar Fuels? Goals & Objectives Thrusts Thrust 1 Thrust 2 Thrust 3 Thrust 4 Library Publications Research Highlights Videos Resources User Facilities Expert Team Benchmarking Database Device Simulation

  7. Tools for Public Information

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Energy Tools for Discovery Offer Potential Hope for Huntington's Tools for Discovery Offer Potential Hope for Huntington's May 25, 2011 - 3:24pm Addthis Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Flora Meilleur prepares protein solutions for structural investigation with neutrons. | Courtesy of ORNL Flickr / Jason Richards Charles Rousseaux Charles Rousseaux Senior Communications Specialist (detailee) What

  8. Velo: Knowledge and Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Velo: Knowledge and Tool Integration for Collaborative Scientific Projects Carina Lansing, Kerstin Kleese van Dam 1 Scientific Project Life Cycle 2 Conceptual Modeling Simulation Execution Visualization & Analytics Data Input Data Uncertainty Quantification Validation, Diagnostics, & Monitoring Reference Data / Data Mining Challenges to Scientists ! Has someone done something similar before? Is there a good example? ! How do I find the information I need? ! What are the best tools to

  9. Method of identifying features in indexed data

    DOE Patents [OSTI]

    Jarman, Kristin H. [Richland, WA; Daly, Don Simone [Richland, WA; Anderson, Kevin K. [Richland, WA; Wahl, Karen L. [Richland, WA

    2001-06-26

    The present invention is a method of identifying features in indexed data, especially useful for distinguishing signal from noise in data provided as a plurality of ordered pairs. Each of the plurality of ordered pairs has an index and a response. The method has the steps of: (a) providing an index window having a first window end located on a first index and extending across a plurality of indices to a second window end; (b) selecting responses corresponding to the plurality of indices within the index window and computing a measure of dispersion of the responses; and (c) comparing the measure of dispersion to a dispersion critical value. Advantages of the present invention include minimizing signal to noise ratio, signal drift, varying baseline signal and combinations thereof.

  10. Microelectromechanical reciprocating-tooth indexing apparatus

    DOE Patents [OSTI]

    Allen, James J. (Albuquerque, NM)

    1999-01-01

    An indexing apparatus is disclosed that can be used to rotate a gear or move a rack in a precise, controllable manner. The indexing apparatus, based on a reciprocating shuttle driven by one or more actuators, can be formed either as a micromachine, or as a millimachine. The reciprocating shuttle of the indexing apparatus can be driven by a thermal, electrostatic or electromagnetic actuator, with one or more wedge-shaped drive teeth of the shuttle being moveable to engage and slide against indexing teeth on the gear or rack, thereby moving the gear or rack. The indexing apparatus can be formed by either surface micromachining processes or LIGA processes, depending on the size of the apparatus that is to be formed.

  11. Manipulative Virtual Tools for Tool Mark Characterization | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manipulative Virtual Tools for Tool Mark Characterization FWPProject Description: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer...

  12. Manipulative Virtual Tools for Tool Mark Characterization | The...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Manipulative Virtual Tools for Tool Mark Characterization DESCRIPTION: The goal of this project is to develop a methodology whereby a three-dimensional (3-D) computer simulation of...

  13. mirabootcamp-tools-2014.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    BGQ Performance Tools Sco P arker Mira P erformance B oot C amp: M ay 2 1, 2 014 Argonne L eadership C ompuBng F acility Mira Tools Status Tool N ame Source Provides Q S tatus...

  14. RSP Tooling Technology

    SciTech Connect (OSTI)

    2001-11-20

    RSP Tooling{trademark} is a spray forming technology tailored for producing molds and dies. The approach combines rapid solidification processing and net-shape materials processing in a single step. The general concept involves converting a mold design described by a CAD file to a tooling master using a suitable rapid prototyping (RP) technology such as stereolithography. A pattern transfer is made to a castable ceramic, typically alumina or fused silica (Figure 1). This is followed by spray forming a thick deposit of a tooling alloy on the pattern to capture the desired shape, surface texture, and detail. The resultant metal block is cooled to room temperature and separated from the pattern. The deposit's exterior walls are machined square, allowing it to be used as an insert in a standard mold base. The overall turnaround time for tooling is about 3 to 5 days, starting with a master. Molds and dies produced in this way have been used in high volume production runs in plastic injection molding and die casting. A Cooperative Research and Development Agreement (CRADA) between the Idaho National Engineering and Environmental Laboratory (INEEL) and Grupo Vitro has been established to evaluate the feasibility of using RSP Tooling technology for producing molds and dies of interest to Vitro. This report summarizes results from Phase I of this agreement, and describes work scope and budget for Phase I1 activities. The main objective in Phase I was to demonstrate the feasibility of applying the Rapid Solidification Process (RSP) Tooling method to produce molds for the manufacture of glass and other components of interest to Vitro. This objective was successfully achieved.

  15. Grid Client Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Client Tools Grid Client Tools Using OSG and Globus client software You can either run the OSG/Globus client software directly on the NERSC systems via "modules" or by downloading it to your workstation. On your workstation: Download and install the OSG client software. Then run the following to setup your environment: % . $INSTALL_DIR/setup.sh or % source $INSTALL_DIR/setup.csh On NERSC Compute Systems: Use the module command to load the OSG or Globus toolkit. Where possible, you

  16. PCard Data Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes,more » Email status (date sent, response), audit resolution.« less

  17. PCard Data Analysis Tool

    SciTech Connect (OSTI)

    Hilts, Jim

    2005-04-01

    The Procurement Card data analysis and monitoring tool enables due-diligence review using predefined user-created queries and reports. The system tracks individual compliance emails. More specifically, the tool: - Helps identify exceptions or questionable and non-compliant purchases, - Creates audit random sample on request, - Allows users to create and run new or ad-hoc queries and reports, - Monitors disputed charges, - Creates predefined Emails to Cardholders requesting documentation and/or clarification, - Tracks audit status, notes, Email status (date sent, response), audit resolution.

  18. Drum lid removal tool

    DOE Patents [OSTI]

    Pella, Bernard M.; Smith, Philip D.

    2010-08-24

    A tool for removing the lid of a metal drum wherein the lid is clamped over the drum rim without protruding edges, the tool having an elongated handle with a blade carried by an angularly positioned holder affixed to the midsection of the handle, the blade being of selected width to slice between lid lip and the drum rim and, when the blade is so positioned, upward motion of the blade handle will cause the blade to pry the lip from the rim and allow the lid to be removed.

  19. Retrofit Financial Analysis Tool

    Office of Energy Efficiency and Renewable Energy (EERE)

    The Street and Parking Facility Lighting Retrofit Financial Analysis Tool was developed by a partnership of the DOE Municipal Solid-State Street Lighting Consortium, the Clinton Climate Initiative (CCI)/C40, and the Federal Energy Management Program (FEMP), for the financial analysis of retrofitting street and parking facility lighting with more efficient alternatives. Property owners, city and other government agencies, utilities, and energy efficiency organizations can use this tool to compute annualized energy and energy-cost savings, maintenance savings, greenhouse gas reductions, net present value, and simple payback associated with potential lighting upgrades.

  20. The GNEMRE Dendro Tool.

    SciTech Connect (OSTI)

    Merchant, Bion John

    2007-10-01

    The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

  1. Log-Tool

    SciTech Connect (OSTI)

    Goodall, John

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the log file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.

  2. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tools Software and Tools Chos Chos is used to select your operating system at PDSF. Read More » Modules Module is a system which you can use to specify what software you want to use... Read More » Project Accounts You can use a shared project account to facilitate collaboration... Read More » Checking Quotas To check your quotas use the myquota command... Read More » Accelerating Remote X Performance You can use NX to greatly improve the performance of X window applications. Read More »

  3. Intel_tools.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ! Cray QBR, Apr 8, 2015 Intel Tools for optimizations HBM tools are available on Edison * The memkind library is a user extensible heap manager. It can be used to test/simulate the benefit of high hand width memory (HBM or HBW) on the dual socket Edison compute nodes today. - Use the QPI bus to simulate slow memory - This is not an accurate model of the bandwidth and latency characteristics of the KNL on package memory, but is a reasonable way to determine which data structures rely critically

  4. CLEAP_Tools_DRAFT_nameupdate

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Zoning Check Climate Explorer Smart Location Database Coastal Resilience Mapping Tool ... Cost of renewable energy spreadsheet tool JEDI Open PV Database OpenEI Datasets BEDES ...

  5. Formation of bulk refractive index structures

    DOE Patents [OSTI]

    Potter, Jr., Barrett George; Potter, Kelly Simmons; Wheeler, David R.; Jamison, Gregory M.

    2003-07-15

    A method of making a stacked three-dimensional refractive index structure in photosensitive materials using photo-patterning where first determined is the wavelength at which a photosensitive material film exhibits a change in refractive index upon exposure to optical radiation, a portion of the surfaces of the photosensitive material film is optically irradiated, the film is marked to produce a registry mark. Multiple films are produced and aligned using the registry marks to form a stacked three-dimensional refractive index structure.

  6. Clean Cities Tools

    SciTech Connect (OSTI)

    2014-12-19

    The U.S. Department of Energy's Clean Cities offers a large collection of Web-based tools on the Alternative Fuels Data Center. These calculators, interactive maps, and data searches can assist fleets, fuels providers, and other transportation decision makers in their efforts to reduce petroleum use.

  7. Energy Footprint Tool

    Office of Energy Efficiency and Renewable Energy (EERE)

    Developed by the U.S. Department of Energy, the Energy Footprint Tool can help manufacturing, commercial and institutional facilities to track their energy consumption, factors related to energy use, and significant energy end-use. This is collectively referred to as the facility’s energy footprint.

  8. Electrically powered hand tool

    DOE Patents [OSTI]

    Myers, Kurt S.; Reed, Teddy R.

    2007-01-16

    An electrically powered hand tool is described and which includes a three phase electrical motor having a plurality of poles; an electrical motor drive electrically coupled with the three phase electrical motor; and a source of electrical power which is converted to greater than about 208 volts three-phase and which is electrically coupled with the electrical motor drive.

  9. Frequency Response Tool

    Energy Science and Technology Software Center (OSTI)

    2014-03-13

    According to the North American Electric Reliability Corporation (NERC) definition: “Frequency response is a measure of an Interconnection’s ability to stabilize frequency immediately following the sudden loss of generation or load, and is a critical component of the reliable operation of the Bulk-Power System, particularly during disturbances and recoveries. Failure to maintain frequency can disrupt the operation of equipment and initiate disconnection of power plant equipment to prevent it from being damaged, which could leadmore » to wide-spread blackouts.” Frequency Response Tool automates the power system frequency response analysis process. The tool performs initial estimation of the system frequency parameters (initial frequency, minimum frequency, settling point). User can visually inspect and adjust these parameters. The tool also calculates the frequency response performance metrics of the system, archives the historic events and baselines the system performance. Frequency response performance characteristics of the system are calculated using phasor measurement unit (PMU) information. Methodology of the frequency response performance assessment implemented in the tool complies with the NERC Frequency response standard.« less

  10. Smart tool holder

    DOE Patents [OSTI]

    Day, R.D.; Foreman, L.R.; Hatch, D.J.; Meadows, M.S.

    1998-09-08

    There is provided an apparatus for machining surfaces to accuracies within the nanometer range by use of electrical current flow through the contact of the cutting tool with the workpiece as a feedback signal to control depth of cut. 3 figs.

  11. MULTIPLE SHAFT TOOL HEAD

    DOE Patents [OSTI]

    Colbert, H.P.

    1962-10-23

    An improved tool head arrangement is designed for the automatic expanding of a plurality of ferruled tubes simultaneously. A plurality of output shafts of a multiple spindle drill head are driven in unison by a hydraulic motor. A plurality of tube expanders are respectively coupled to the shafts through individual power train arrangements. The axial or thrust force required for the rolling operation is provided by a double acting hydraulic cylinder having a hollow through shaft with the shaft cooperating with an internally rotatable splined shaft slidably coupled to a coupling rigidly attached to the respectlve output shaft of the drill head, thereby transmitting rotary motion and axial thrust simultaneously to the tube expander. A hydraulic power unit supplies power to each of the double acting cylinders through respective two-position, four-way valves, under control of respective solenoids for each of the cylinders. The solenoids are in turn selectively controlled by a tool selection control unit which in turn is controlled by signals received from a programmed, coded tape from a tape reader. The number of expanders that are extended in a rolling operation, which may be up to 42 expanders, is determined by a predetermined program of operations depending upon the arrangement of the ferruled tubes to be expanded in the tube bundle. The tape reader also supplies dimensional information to a machine tool servo control unit for imparting selected, horizontal and/or vertical movement to the tool head assembly. (AEC)

  12. Chizu Task Mapping Tool

    Energy Science and Technology Software Center (OSTI)

    2014-07-01

    Chizu is a tool for Mapping MPI processes or tasks to physical processors or nodes for optimizing communication performance. It takes the communication graph of a High Performance Computing (HPC) application and the interconnection topology of a supercomputer as input. It outputs a new MPI rand to processor mapping, which can be used when launching the HPC application.

  13. Laboratory Equipment Donation Program - Site Index

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Site Index Home About Us FAQ Application Contact Us Administrative Login RSS Widget U.S. Department of Energy U.S. Deparment of Energy Office of Science Office of Scientific and...

  14. NEPA Guidance and Requirements- Search Index

    Office of Energy Efficiency and Renewable Energy (EERE)

    The NEPA Guidance and Requirements - Search Index is a one-stop solution providing you with DOE's Guidance and Requirements documents combined into one file for easy download and use.

  15. Structural Health Monitoring Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Function Library LANL/UCSD Engineering Institute LA-CC-14-046 LA-UR-14-21142 © Copyright 2014, Los Alamos National Security, LLC All rights reserved. May 30, 2014 LA-CC-14-046 LA-UR-14-21142 Contents 1 File Index 1 1.1 File List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 File Documentation 7 2.1 addResp2Geom_shm.m File Reference . . . . . . . . . . . . . . . . . 7 2.2 analyticSignal_shm.m File Reference . . . . . . . . . . . . . . . . . 9 2.3 arModel_shm.m File

  16. Search for heavy lepton resonances decaying to a Z boson and a lepton in pp collisions at \\( \\sqrt{s}=8 \\) TeV with the ATLAS detector

    SciTech Connect (OSTI)

    Aad, G.

    2015-09-16

    In this study, a search for heavy leptons decaying to a Z boson and an electron or a muon is presented. The search is based on pp collision data taken at \\( \\sqrt{s}=8 \\) TeV by the ATLAS experiment at the CERN Large Hadron Collider, corresponding to an integrated luminosity of 20.3 fb⁻¹. Three high-transverse-momentum electrons or muons are selected, with two of them required to be consistent with originating from a Z boson decay. No significant excess above Standard Model background predictions is observed, and 95% confidence level limits on the production cross section of high-mass trilepton resonances are derived. The results are interpreted in the context of vector-like lepton and type-III seesaw models. For the vector-like lepton model, most heavy lepton mass values in the range 114–176 GeV are excluded. For the type-III seesaw model, most mass values in the range 100–468 GeV are excluded.

  17. Search for heavy lepton resonances decaying to a Z boson and a lepton in pp collisions at \\( \\sqrt{s}=8 \\) TeV with the ATLAS detector

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Aad, G.

    2015-09-16

    In this study, a search for heavy leptons decaying to a Z boson and an electron or a muon is presented. The search is based on pp collision data taken at \\( \\sqrt{s}=8 \\) TeV by the ATLAS experiment at the CERN Large Hadron Collider, corresponding to an integrated luminosity of 20.3 fb⁻¹. Three high-transverse-momentum electrons or muons are selected, with two of them required to be consistent with originating from a Z boson decay. No significant excess above Standard Model background predictions is observed, and 95% confidence level limits on the production cross section of high-mass trilepton resonances aremore » derived. The results are interpreted in the context of vector-like lepton and type-III seesaw models. For the vector-like lepton model, most heavy lepton mass values in the range 114–176 GeV are excluded. For the type-III seesaw model, most mass values in the range 100–468 GeV are excluded.« less

  18. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, J.E.

    1992-10-13

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw. 3 figs.

  19. Pneumatic soil removal tool

    DOE Patents [OSTI]

    Neuhaus, John E.

    1992-01-01

    A soil removal tool is provided for removing radioactive soil, rock and other debris from the bottom of an excavation, while permitting the operator to be located outside of a containment for that excavation. The tool includes a fixed jaw, secured to one end of an elongate pipe, which cooperates with a movable jaw pivotably mounted on the pipe. Movement of the movable jaw is controlled by a pneumatic cylinder mounted on the pipe. The actuator rod of the pneumatic cylinder is connected to a collar which is slidably mounted on the pipe and forms part of the pivotable mounting assembly for the movable jaw. Air is supplied to the pneumatic cylinder through a handle connected to the pipe, under the control of an actuator valve mounted on the handle, to provide movement of the movable jaw.

  20. Load Model Data Tool

    SciTech Connect (OSTI)

    David Chassin, Pavel Etingov

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to be provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.

  1. Fluid blade disablement tool

    DOE Patents [OSTI]

    Jakaboski, Juan-Carlos; Hughs, Chance G.; Todd, Steven N.

    2012-01-10

    A fluid blade disablement (FBD) tool that forms both a focused fluid projectile that resembles a blade, which can provide precision penetration of a barrier wall, and a broad fluid projectile that functions substantially like a hammer, which can produce general disruption of structures behind the barrier wall. Embodiments of the FBD tool comprise a container capable of holding fluid, an explosive assembly which is positioned within the container and which comprises an explosive holder and explosive, and a means for detonating. The container has a concavity on the side adjacent to the exposed surface of the explosive. The position of the concavity relative to the explosive and its construction of materials with thicknesses that facilitate inversion and/or rupture of the concavity wall enable the formation of a sharp and coherent blade of fluid advancing ahead of the detonation gases.

  2. Algal functional annotation tool

    SciTech Connect (OSTI)

    Lopez, D.; Casero, D.; Cokus, S. J.; Merchant, S. S.; Pellegrini, M.

    2012-07-01

    The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG pathway maps and batch gene identifier conversion.

  3. Stack Trace Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2013-02-19

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallell application. STAT uses the MRNet tree based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to from a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence slasses. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  4. Log-Tool

    Energy Science and Technology Software Center (OSTI)

    2012-05-21

    Log files are typically semi- or un-structured. To be useable for visualization and machine learning, they need to be parsed into a standard, structured format. Log-tool is a tool for facilitating the parsing, structuring, and routing of log files (e.g. intrusion detection long, web server logs, system logs). It consists of three main components: (1) Input – it will input data from files, standard input, and syslog, (2) Parser – it will parse the logmore » file based on regular expressions into structured data (JSNO format), (3) Output – it will output structured data into commonly used formats, including Redis (a database), standard output, and syslog.« less

  5. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Software and Tools Software and Tools The table below shows the software installed on Edison that is managed by modules. Package Category Version Module Install Date Date Made Default / 1.0.1 cray-cti/1.0.1 2016-07-21 2016-07-21 / 16.07 cdt/16.07 2016-07-21 A Fortran interface to the GNU Scientific Library (GSL) libraries/ math 1.0.0 fgsl/1.0.0 2015-04-14 2016-08-31 ABINIT applications/ material sciences 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT applications/ material sciences 7.10.2

  6. Building energy analysis tool

    DOE Patents [OSTI]

    Brackney, Larry; Parker, Andrew; Long, Nicholas; Metzger, Ian; Dean, Jesse; Lisell, Lars

    2016-04-12

    A building energy analysis system includes a building component library configured to store a plurality of building components, a modeling tool configured to access the building component library and create a building model of a building under analysis using building spatial data and using selected building components of the plurality of building components stored in the building component library, a building analysis engine configured to operate the building model and generate a baseline energy model of the building under analysis and further configured to apply one or more energy conservation measures to the baseline energy model in order to generate one or more corresponding optimized energy models, and a recommendation tool configured to assess the one or more optimized energy models against the baseline energy model and generate recommendations for substitute building components or modifications.

  7. Load Model Data Tool

    Energy Science and Technology Software Center (OSTI)

    2013-04-30

    The LMDT software automates the process of the load composite model data preparation in the format supported by the major power system software vendors (GE and Siemens). Proper representation of the load composite model in power system dynamic analysis is very important. Software tools for power system simulation like GE PSLF and Siemens PSSE already include algorithms for the load composite modeling. However, these tools require that the input information on composite load to bemore » provided in custom formats. Preparation of this data is time consuming and requires multiple manual operations. The LMDT software enables to automate this process. Software is designed to generate composite load model data. It uses the default load composition data, motor information, and bus information as an input. Software processes the input information and produces load composition model. Generated model can be stored in .dyd format supported by GE PSLF package or .dyr format supported by Siemens PSSE package.« less

  8. List of Programming Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Programming Tools List List of Programming Tools Package Platform Version Module Install Date Date Made Default 7zip genepool 9.20.1 7zip/9.20.1 2013-01-14 2013-01-14 7zip phoebe 9.20.1 7zip/9.20.1 2013-01-14 2013-06-26 ABINIT cori 7.10.4 abinit/7.10.4 2015-09-24 2015-09-24 ABINIT cori 8.0.8 abinit/8.0.8 2016-06-30 2016-06-30 ABINIT edison 7.0.5 abinit/7.0.5 2013-03-12 2013-03-12 ABINIT edison 7.10.2 abinit/7.10.2 2015-01-27 ABINIT edison 7.10.4 abinit/7.10.4 2015-07-31 ABINIT edison 7.4.2

  9. Stack Trace Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2008-01-16

    STAT is a light weight debugging tool that gathers and merges stack traces from all of the processes in a parallel application. STAT uses the MRNet free based overlay network to broadcast commands from the tool front-end to the STAT daemons and for the front-end to gather the traces from the STAT daemons. As the traces propagate through the MRNet network tree, they are merged across all tasks to form a single call prefix tree.more » The call prefix tree can be examined to identify tasks with similar function call patterns and to delineate a small set of equivalence classes. A representative task from each of these classes can then be fed into a full feature debugger like TotalView for root cause analysis.« less

  10. NREL: Technology Deployment - Tool Development

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Tool Development Use NREL's models and tools to prioritize opportunities and analyze the energy savings and economics of energy efficiency, advanced transportation, and renewable energy projects. NREL develops geographic tools, interactive calculators, market and metrics databases, and mobile applications to help inform sustainable energy projects and prepare the market for emerging technologies. Geographic Tools Drawing from rich datasets, NREL builds tools that deliver interactive mapping

  11. Rotor Design Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Design Tools - Sandia Energy Energy Search Icon Sandia Home Locations Contact Us Employee Locator Energy & Climate Secure & Sustainable Energy Future Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power Supercritical CO2 Geothermal Natural Gas Safety, Security & Resilience of the Energy Infrastructure Energy Storage Nuclear Power & Engineering Grid Modernization Battery Testing Nuclear Energy Defense Waste Management Programs Advanced Nuclear Energy

  12. Java Vertexing Tools

    SciTech Connect (OSTI)

    Strube, Jan; Graf, Norman; /SLAC

    2006-03-03

    This document describes the implementation of the topological vertex finding algorithm ZVTOP within the org.lcsim reconstruction and analysis framework. At the present date, Java vertexing tools allow users to perform topological vertexing on tracks that have been obtained from a Fast MC simulation. An implementation that will be able to handle fully reconstructed events is being designed from the ground up for longevity and maintainability.

  13. Channel nut tool

    DOE Patents [OSTI]

    Olson, Marvin

    2016-01-12

    A method, system, and apparatus for installing channel nuts includes a shank, a handle formed on a first end of a shank, and an end piece with a threaded shaft configured to receive a channel nut formed on the second end of the shaft. The tool can be used to insert or remove a channel nut in a channel framing system and then removed from the channel nut.

  14. REMOTE RETRIEVING TOOL

    DOE Patents [OSTI]

    Fromm, L.W. Jr.

    1958-08-19

    A retrieving tool is described to securely grasp an object for emplacement in, or withdrawal from, an elongated tube. The object is grasped by hooks actuated by a wedge and cann mechanism. The mechanism on the end of a long rodlike structure is controlled by levers or bars at the access end of the tube. This device is particularly useful for positioning fuel elements within a reactor core.

  15. Environmental Compliance Assistance Tool

    Energy Science and Technology Software Center (OSTI)

    1999-04-16

    ENVIROCAT is a database/knowledge base software system designed to assist in environment, safety and health (ES&H) regulatory compliance assessments of manufacturing processes. Materials and processes are mapped to ES&H regulations. The regulations database identifies materials'' quantities and limits of compliance. Materials are identified per descriptive name or CAS number. ENVIROCAT has an interactive user/tool capability such that a question and answer session on materials and processes is custom tailored to a particular manufacturing site.

  16. Sierra Nevada Tools

    Energy Science and Technology Software Center (OSTI)

    2004-01-01

    SNTools is a general framework for managing, through the use of policies, development tools used to create software. To date, most implementations written under the framework focus on managing revision control, building and testing. The Sierra implementation of the SNTools is used in the development and installation of the SIERRA Framework and its applications, SNTools is used as a method of managing or codifying software quality engineering practices.

  17. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Franklin Queues and Policies File storage and I/O Software and Tools Debugging and profiling Cray XT Documentation Franklin is Being Retired Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours Status and Password help Call operations: 1-800-66-NERSC, option 1 or 510-486-6821 Account Support

  18. Software and Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    File Storage and I/O Software and Tools Debugging and profiling Performance and Optimization Cray XE Documentation Cluster Compatibility Mode Hopper, Cray XE6 Carver Jesup Dirac Edison Phase I Euclid - Retired 01/31/2013 Franklin - Retired 04/30/12 Bassi Storage & File Systems Application Performance Data & Analytics Job Logs & Statistics Training & Tutorials Software Policies User Surveys NERSC Users Group Help Staff Blogs Request Repository Mailing List Need Help? Out-of-hours

  19. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, A.R.; Johnston, R.G.; Martinez, R.K.

    1999-05-25

    A fluid sampling tool is described for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall. 6 figs.

  20. Frequency Response Analysis Tool

    SciTech Connect (OSTI)

    Etingov, Pavel V.; Kosterev, Dmitry; Dai, T.

    2014-12-31

    Frequency response has received a lot of attention in recent years at the national level, which culminated in the development and approval of North American Electricity Reliability Corporation (NERC) BAL-003-1 Frequency Response and Frequency Bias Setting Reliability Standard. This report is prepared to describe the details of the work conducted by Pacific Northwest National Laboratory (PNNL) in collaboration with the Bonneville Power Administration and Western Electricity Coordinating Council (WECC) Joint Synchronized Information Subcommittee (JSIS) to develop a frequency response analysis tool (FRAT). The document provides the details on the methodology and main features of the FRAT. The tool manages the database of under-frequency events and calculates the frequency response baseline. Frequency response calculations are consistent with frequency response measure (FRM) in NERC BAL-003-1 for an interconnection and balancing authority. The FRAT can use both phasor measurement unit (PMU) data, where available, and supervisory control and data acquisition (SCADA) data. The tool is also capable of automatically generating NERC Frequency Response Survey (FRS) forms required by BAL-003-1 Standard.

  1. Fluid sampling tool

    DOE Patents [OSTI]

    Garcia, Anthony R.; Johnston, Roger G.; Martinez, Ronald K.

    1999-05-25

    A fluid sampling tool for sampling fluid from a container. The tool has a fluid collecting portion which is drilled into the container wall, thereby affixing it to the wall. The tool may have a fluid extracting section which withdraws fluid collected by the fluid collecting section. The fluid collecting section has a fluted shank with an end configured to drill a hole into a container wall. The shank has a threaded portion for tapping the borehole. The shank is threadably engaged to a cylindrical housing having an inner axial passageway sealed at one end by a septum. A flexible member having a cylindrical portion and a bulbous portion is provided. The housing can be slid into an inner axial passageway in the cylindrical portion and sealed to the flexible member. The bulbous portion has an outer lip defining an opening. The housing is clamped into the chuck of a drill, the lip of the bulbous section is pressed against a container wall until the shank touches the wall, and the user operates the drill. Wall shavings (kerf) are confined in a chamber formed in the bulbous section as it folds when the shank advances inside the container. After sufficient advancement of the shank, an o-ring makes a seal with the container wall.

  2. Decision Support Tool: Integrated REDD+ accounting frameworks...

    Open Energy Info (EERE)

    Decision Support Tool: Integrated REDD+ accounting frameworks: Nested national approaches Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Decision Support Tool:...

  3. Renewable Energy Financial Instruments Guidance Tool (REFINe...

    Open Energy Info (EERE)

    Guidance Tool (REFINe) Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Renewable Energy Financial Instruments Guidance Tool (REFINe) Focus Area: Renewable Energy...

  4. Energy Storage Computational Tool | Open Energy Information

    Open Energy Info (EERE)

    Energy Storage Computational Tool Jump to: navigation, search Tool Summary LAUNCH TOOL Name: Energy Storage Computational Tool AgencyCompany Organization: Navigant Consulting...

  5. LEDSGP/tools | Open Energy Information

    Open Energy Info (EERE)

    Data & Tools Publications Training Knowledge Portals LEDS Benefits Back to top Peer-Learning Tools LEDS Activity and Tool Inventory Our LEDS Activity and Tool Inventory provides...

  6. Algal functional annotation tool

    SciTech Connect (OSTI)

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations to interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on KEGG

  7. Algal functional annotation tool

    Energy Science and Technology Software Center (OSTI)

    2012-07-12

    Abstract BACKGROUND: Progress in genome sequencing is proceeding at an exponential pace, and several new algal genomes are becoming available every year. One of the challenges facing the community is the association of protein sequences encoded in the genomes with biological function. While most genome assembly projects generate annotations for predicted protein sequences, they are usually limited and integrate functional terms from a limited number of databases. Another challenge is the use of annotations tomore » interpret large lists of 'interesting' genes generated by genome-scale datasets. Previously, these gene lists had to be analyzed across several independent biological databases, often on a gene-by-gene basis. In contrast, several annotation databases, such as DAVID, integrate data from multiple functional databases and reveal underlying biological themes of large gene lists. While several such databases have been constructed for animals, none is currently available for the study of algae. Due to renewed interest in algae as potential sources of biofuels and the emergence of multiple algal genome sequences, a significant need has arisen for such a database to process the growing compendiums of algal genomic data. DESCRIPTION: The Algal Functional Annotation Tool is a web-based comprehensive analysis suite integrating annotation data from several pathway, ontology, and protein family databases. The current version provides annotation for the model alga Chlamydomonas reinhardtii, and in the future will include additional genomes. The site allows users to interpret large gene lists by identifying associated functional terms, and their enrichment. Additionally, expression data for several experimental conditions were compiled and analyzed to provide an expression-based enrichment search. A tool to search for functionally-related genes based on gene expression across these conditions is also provided. Other features include dynamic visualization of genes on

  8. Parallel Index and Query for Large Scale Data Analysis

    SciTech Connect (OSTI)

    Chou, Jerry; Wu, Kesheng; Ruebel, Oliver; Howison, Mark; Qiang, Ji; Prabhat,; Austin, Brian; Bethel, E. Wes; Ryne, Rob D.; Shoshani, Arie

    2011-07-18

    Modern scientific datasets present numerous data management and analysis challenges. State-of-the-art index and query technologies are critical for facilitating interactive exploration of large datasets, but numerous challenges remain in terms of designing a system for process- ing general scientific datasets. The system needs to be able to run on distributed multi-core platforms, efficiently utilize underlying I/O infrastructure, and scale to massive datasets. We present FastQuery, a novel software framework that address these challenges. FastQuery utilizes a state-of-the-art index and query technology (FastBit) and is designed to process mas- sive datasets on modern supercomputing platforms. We apply FastQuery to processing of a massive 50TB dataset generated by a large scale accelerator modeling code. We demonstrate the scalability of the tool to 11,520 cores. Motivated by the scientific need to search for inter- esting particles in this dataset, we use our framework to reduce search time from hours to tens of seconds.

  9. Groove refinishing tool

    DOE Patents [OSTI]

    Kellogg, Harvey J.; Holm, Robert O.

    1983-01-01

    A groove refinishing tool which utilizes a finishing wheel which is controlled by an air grinder motor. The air grinder motor is mounted on a main body section which is pivotally attached to a shoe element. The shoe element contains guide pins which guide the shoe element on the groove to be refinished. Application of pressure on the main body element compresses a weight counterbalance spring to extend the finishing wheel through the shoe element to refinish the groove surface. A window is provided for viewing the refinishing operation. Milling operations can also be performed by replacing the finishing wheel with a milling wheel.

  10. Cyber Security Evaluation Tool

    Energy Science and Technology Software Center (OSTI)

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization’s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied tomore » enhance cybersecurity controls.« less

  11. Cyber Security Evaluation Tool

    SciTech Connect (OSTI)

    2009-08-03

    CSET is a desktop software tool that guides users through a step-by-step process to assess their control system network security practices against recognized industry standards. The output from CSET is a prioritized list of recommendations for improving the cyber security posture of your organization?¢????s ICS or enterprise network. CSET derives the recommendations from a database of cybersecurity standards, guidelines, and practices. Each recommendation is linked to a set of actions that can be applied to enhance cybersecurity controls.

  12. Graphical Contingency Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2010-03-02

    GCA is a visual analytic tool for power grid contingency analysis to provide more decision support for power grid operations. GCA allows power grid operators to quickly gain situational awareness of power grid by converting large amounts of operational data to graphic domain with a color contoured map; identify system trend and foresee and discern emergencies by performing trending analysis; identify the relationships between system configurations and affected assets by conducting clustering analysis; and identifymore » the best action by interactively evaluate candidate actions.« less

  13. Measurement of electroweak production of two jets in association with a Z boson in proton-proton collisions at ?s = 8 TeV

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, V.

    2015-02-10

    The purely electroweak (EW) cross section for the production of two jets in association with a Z boson, in proton-proton collisions at ?s = 8 TeV, is measured using data recorded by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of 19.7 fb-1. The electroweak cross section for the lljj final state (with l = e or ? and j representing the quarks produced in the hard interaction) in the kinematic region defined by Mll> 50 GeV, Mjj > 120 GeV, transverse momentum pTj > 25 GeV, and pseudorapidity |?j| more?EW(lljj) = 174 15 (stat) 40 (syst) fb, in agreement with the standard model prediction. The associated jet activity of the selected events is studied, in particular in a signal-enriched region of phase space, and the measurements are found to be in agreement with QCD predictions.less

  14. U.S. Department of Energy Project Definition Rating Index Guide

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    2010-07-22

    This Guide assists individuals and teams involved in conducting assessments of project definition (i.e., how well front-end planning has been conducted to define project scope) using a numerical project management tool developed by the Construction Industry Institute (CII), tailored for DOE use. Called the Project Definition Rating Index (PDRI), the PDRI is a simple but powerful tool that facilitates the measurement of the degree of scope definition for completeness for traditional construction projects, both nuclear and non-nuclear. No cancellations.

  15. Geometric reasoning about assembly tools

    SciTech Connect (OSTI)

    Wilson, R.H.

    1997-01-01

    Planning for assembly requires reasoning about various tools used by humans, robots, or other automation to manipulate, attach, and test parts and subassemblies. This paper presents a general framework to represent and reason about geometric accessibility issues for a wide variety of such assembly tools. Central to the framework is a use volume encoding a minimum space that must be free in an assembly state to apply a given tool, and placement constraints on where that volume must be placed relative to the parts on which the tool acts. Determining whether a tool can be applied in a given assembly state is then reduced to an instance of the FINDPLACE problem. In addition, the author presents more efficient methods to integrate the framework into assembly planning. For tools that are applied either before or after their target parts are mated, one method pre-processes a single tool application for all possible states of assembly of a product in polynomial time, reducing all later state-tool queries to evaluations of a simple expression. For tools applied after their target parts are mated, a complementary method guarantees polynomial-time assembly planning. The author presents a wide variety of tools that can be described adequately using the approach, and surveys tool catalogs to determine coverage of standard tools. Finally, the author describes an implementation of the approach in an assembly planning system and experiments with a library of over one hundred manual and robotic tools and several complex assemblies.

  16. Plasmonic crystal enhanced refractive index sensing

    SciTech Connect (OSTI)

    Stein, Benedikt; Devaux, Eloïse; Genet, Cyriaque Ebbesen, Thomas W.

    2014-06-23

    We demonstrate experimentally how the local anisotropy of the dispersion relation of surface plasmon modes propagating over periodic metal gratings can lead to an enhancement of the figure of merit of refractive index sensors. Exploiting the possibility to acquire defocused images of the Fourier space of a highly stable leakage radiation microscope, we report a twofold increase in sensing sensitivity close to the band gap of a one-dimensional plasmonic crystal where the anisotropy of the band structure is the most important. A practical sensing resolution of O(10{sup −6}) refractive index units is demonstrated.

  17. Manufactured Homes Tool

    Energy Science and Technology Software Center (OSTI)

    2005-03-09

    The MH Tool software is designed to evaluate existing and new manufactured homes for structural adequacy in high winds. Users define design elements of a manufactured home and then select the hazard(s) for analysis. MH Tool then calculates and reports structural analysis results for the specified design and hazard Method of Solution: Design engineers input information (geometries, materials, etc.) describing the structure of a manufactured home, from which the software automatically creates a mathematical model.more » Windows, doors, and interior walls can be added to the initial design. HUD Code loads (wind, snow loads, interior live loads, etc.) are automatically applied. A finite element analysis is automatically performed using a third party solver to find forces and stresses throughout the structure. The designer may then employ components of strength (and cost) most appropriate for the loads that must be carried at each location, and then re-run the analysis for verification. If forces and stresses are still within tolerable limits (such as the HUD requirements), construction costs would be reduced without sacrificing quality.« less

  18. Treatment Deployment Evaluation Tool

    SciTech Connect (OSTI)

    Rynearson, Michael Ardel; Plum, Martin Michael

    1999-08-01

    The U.S. Department of Energy (DOE) is responsible for the final disposition of legacy spent nuclear fuel (SNF). As a response, DOE's National Spent Nuclear Fuel Program (NSNFP) has been given the responsibility for the disposition of DOE -owned SNF. Many treatment technologies have been identified to treat some forms of SNF so that the resulting treated product is acceptable by the disposition site. One of these promising treatment processes is the electrometallurgical treatment (EMT) currently in development; a second is an Acid Wash Decladding process. The NSNFP has been tasked with identifying possible strategies for the deployment of these treatment processes in the event that the treatment path is deemed necessary. To support the siting studies of these strategies, economic evaluations are being performed to identify the least-cost deployment path. This model (tool) was developed to consider the full scope of costs, technical feasibility, process material disposition, and schedule attributes over the life of each deployment alternative. Using standard personal computer (PC) software, the model was developed as a comprehensive technology economic assessment tool using a Life-Cycle Cost (LCC) analysis methodology. Model development was planned as a systematic, iterative process of identifying and bounding the required activities to dispose of SNF. To support the evaluation process, activities are decomposed into lower level, easier to estimate activities. Sensitivity studies can then be performed on these activities, defining cost issues and testing results against the originally stated problem.

  19. Developing an operational capabilities index of the emergency services sector.

    SciTech Connect (OSTI)

    Collins, M.J.; Eaton, L.K.; Shoemaker, Z.M.; Fisher, R.E.; Veselka, S.N.; Wallace, K.E.; Petit, F.D.

    2012-02-20

    capabilities of a jurisdiction to protect itself from, mitigate, respond to, and recover from a potential incident. On the basis of this metric, an interactive tool - the ESSCI Dashboard - can identify scenarios for enhancement that can be implemented, and it can identify the repercussions of these scenarios on the jurisdiction. It can assess the capabilities of law enforcement, fire fighting, search and rescue, emergency medical services, hazardous materials response, dispatch/911, and emergency management services in a given jurisdiction and it can help guide those who need to prioritize what limited resources should be used to improve these capabilities. Furthermore, this tool can be used to compare the level of capabilities of various jurisdictions that have similar socioeconomic characteristics. It can thus help DHS define how it can support risk reduction and community preparedness at a national level. This tool aligns directly with Presidential Policy Directive 8 by giving a jurisdiction a metric of its ESS's capabilities and by promoting an interactive approach for defining options to improve preparedness and to effectively respond to a disruptive event. It can be used in combination with other CI performance metrics developed at Argonne National Laboratory, such as the vulnerability index and the resilience index for assessing regional resilience.

  20. Fan System Assessment Tool (FSAT)

    Broader source: Energy.gov [DOE]

    The Fan System Assessment Tool (FSAT) is a free online software tool that helps industrial users quantify energy use and savings opportunities in industrial fan systems. Use FSAT to understand how...

  1. HPC Debugging and Performance Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Debugging and Performance Tools HPC Debugging and Performance Tools February 16, 2012 L An error occurred. Try watching this video on www.youtube.com, or enable JavaScript if it is...

  2. Built Environment Energy Analysis Tool

    Broader source: Energy.gov [DOE]

    This documentation describes the development of a tool created to evaluate the effects of built environment scenarios on transportation energy and greenhouse gas (GHG) emissions, and provides guidance on how to apply the tool.

  3. User Experience Research Online Tools

    Broader source: Energy.gov [DOE]

    The Office of Energy Efficiency and Renewable Energy (EERE) has a variety of online tools to help you conduct user experience (UX) research. The following tools are free for use by staff and contractors who work on the EERE website.

  4. Wafer handling and placement tool

    DOE Patents [OSTI]

    Witherspoon, Linda L.

    1988-01-05

    A spring arm tool is provided for clamp engaging and supporting wafers while the tool is hand held. The tool includes a pair of relatively swingable jaw element supporting support arms and the jaw elements are notched to enjoy multiple point contact with a wafer peripheral portion. Also, one disclosed form of the tool includes remotely operable workpiece ejecting structure carried by the jaw elements thereof.

  5. Prioritization Tool Measurement Input Form

    Office of Energy Efficiency and Renewable Energy (EERE)

    BTO encourages stakeholders to recommend updates and improvements to the Prioritization Tool by using the below Measure Input Form.

  6. HPC_Tools-Gerber.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    6, 2012 * Introduction * Debugging * Performance / Optimization Outline Videos, presentations, and references: http://www.nersc.gov/users/training/courses/CS267/ Also see the DOE Advanced Computational Tools: http://acts.nersc.gov 3 * Today's Talks - Strategies for parallel performance (D. Skinner) - Debugging and optimization tools (R. Gerber) * Take Aways - Common problems to look out for - How tools work in general - A few specific tools you can try - Where to get more information

  7. Proposal of an environmental performance index to assess solid waste treatment technologies

    SciTech Connect (OSTI)

    Goulart Coelho, Hosmanny Mauro; Lange, Lisete Celina; Coelho, Lineker Max Goulart

    2012-07-15

    Highlights: Black-Right-Pointing-Pointer Proposal of a new concept in waste management: Cleaner Treatment. Black-Right-Pointing-Pointer Development of an index to assess quantitatively waste treatment technologies. Black-Right-Pointing-Pointer Delphi Method was carried out so as to define environmental indicators. Black-Right-Pointing-Pointer Environmental performance evaluation of waste-to-energy plants. - Abstract: Although the concern with sustainable development and environment protection has considerably grown in the last years it is noted that the majority of decision making models and tools are still either excessively tied to economic aspects or geared to the production process. Moreover, existing models focus on the priority steps of solid waste management, beyond waste energy recovery and disposal. So, in order to help the lack of models and tools aiming at the waste treatment and final disposal, a new concept is proposed: the Cleaner Treatment, which is based on the Cleaner Production principles. This paper focuses on the development and validation of the Cleaner Treatment Index (CTI), to assess environmental performance of waste treatment technologies based on the Cleaner Treatment concept. The index is formed by aggregation (summation or product) of several indicators that consists in operational parameters. The weights of the indicator were established by Delphi Method and Brazilian Environmental Laws. In addition, sensitivity analyses were carried out comparing both aggregation methods. Finally, index validation was carried out by applying the CTI to 10 waste-to-energy plants data. From sensitivity analysis and validation results it is possible to infer that summation model is the most suitable aggregation method. For summation method, CTI results were superior to 0.5 (in a scale from 0 to 1) for most facilities evaluated. So, this study demonstrates that CTI is a simple and robust tool to assess and compare the environmental performance of different

  8. Time Ordered Astrophysics Scalable Tools

    Energy Science and Technology Software Center (OSTI)

    2011-12-14

    This software package provides tools for astrophysical experiments which record data in the form of individual time streams from discrete detectors. TOAST provides tools from meta-data manipulation and job set up, I/O operation, telescope pointing reconstruction, and map-making. It also provides tools for constructing simulated observations.

  9. Regulatory and technical reports (Abstract Index Journal)

    SciTech Connect (OSTI)

    Not Available

    1993-02-01

    This journal includes all formal reports in the NUREG series prepared by the NRC staff and contractors, proceedings of conferences and workshops, grants, and international agreement reports. The entries in this compilation are indexed for access by title and abstract, secondary report number, personal author, subject, NRC organization for staff and international agreements, contractor, international organization, and licensed facility.

  10. Transmission Planning Analysis Tool

    SciTech Connect (OSTI)

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identify weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.

  11. Document Flowdown Tool

    SciTech Connect (OSTI)

    2010-12-31

    DFTool performs the following: ? A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. ? Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. ? Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. ? Ability to be accessed by all personnel (particularly document owners). ? Shows both document flow-up and flow-down. ? Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). ? Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level

  12. Outyear Budgeting Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    OBTool performs the following: • Consistent method and tool to develop/estimate fiscal year (FY) 2010 and outyear budget/estimates • Maintain configuration control on resource rates and changes to outyear budget estimates, while allowing for accessibility, accountability, and tracking shared access between program managers, facility managers (FMs), project managers (PMs), cost account managers (CAMs), and project controls engineers (PCEs) • Consistency in budget estimating methodology, including scope, requirements, basis of estimates, resources, activities, escalation, and presentationmore » of documentation in tasks and execution plans and reports • Ability to sync (i.e. export) and import data into Primavera and Cobra to the lifecycle baseline file« less

  13. Document Flowdown Tool

    Energy Science and Technology Software Center (OSTI)

    2010-12-31

    DFTool performs the following: • A tool to conduct, capture, document, and manage a systematic review and flowdown of contractual requirements/documents to the site, facility, and project-level implementing documents. • Ability to alert/email document owners to impending changes/updates and impacts to upper-level linked documents. • Custom ability to generate reports and/or include custom functionalities based on other needs or consideration for site use. • Ability to be accessed by all personnel (particularly document owners). •more » Shows both document flow-up and flow-down. • Provides visibility where links/flowdown does not currently exist or is incorrect so it can be changed/updated (no visibility currently exists). • Ability to capture requirements and ultimately link to an existing/proven requirements-based commitment tracking system which can be used (electively) at the facility/organizational-level« less

  14. Bio Risk Assessment Tool

    Energy Science and Technology Software Center (OSTI)

    2004-07-22

    The Biosecurity Risk Assessment Tool (BRAT) is a new type of computer application for the screening-level assessment of risk to dairy operations. BRAT for Dairies is designed to be intuitive and easy to use. Users enter basic data-property address, feed management, employee population, and so on - into the interface. Using these data and rules found in an expert system. BRAT for Dairies consults appropriate sections of its database. The expert system determines the riskmore » implications of the basic data, e.g. diseases are closely tied to pen location with respect to the outside world, When the analysis is complete, BRAT for Dairies evaluates and allocates the risk for each hazard, ranks the risks, and displays the results graphically.« less

  15. Transmission Planning Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2015-06-23

    Developed to solve specific problem: Assist transmission planning for regional transfers in interconnected power systems. This work was originated in a study for the U.S. Department of State, to recommend transmission reinforcements for the Central American regional system that interconnects 6 countries. Transmission planning analysis is currently performed by engineers with domainspecific and systemspecific knowledge without a unique methodology. The software codes of this disclosure assists engineers by defining systematic analysis procedures to help identifymore » weak points and make decisions on transmission planning of regional interconnected power systems. Transmission Planning Analysis Tool groups PSS/E results of multiple AC contingency analysis and voltage stability analysis and QV analysis of many scenarios of study and arrange them in a systematic way to aid power system planning engineers or transmission operators in effective decision]making process or in the off]line study environment.« less

  16. Tools for Understanding Identity

    SciTech Connect (OSTI)

    Creese, Sadie; Gibson-Robinson, Thomas; Goldsmith, Michael; Hodges, Duncan; Kim, Dee DH; Love, Oriana J.; Nurse, Jason R.; Pike, William A.; Scholtz, Jean

    2013-12-28

    Identity attribution and enrichment is critical to many aspects of law-enforcement and intelligence gathering; this identity typically spans a number of domains in the natural-world such as biographic information (factual information – e.g. names, addresses), biometric information (e.g. fingerprints) and psychological information. In addition to these natural-world projections of identity, identity elements are projected in the cyber-world. Conversely, undesirable elements may use similar techniques to target individuals for spear-phishing attacks (or worse), and potential targets or their organizations may want to determine how to minimize the attack surface exposed. Our research has been exploring the construction of a mathematical model for identity that supports such holistic identities. The model captures the ways in which an identity is constructed through a combination of data elements (e.g. a username on a forum, an address, a telephone number). Some of these elements may allow new characteristics to be inferred, hence enriching the holistic view of the identity. An example use-case would be the inference of real names from usernames, the ‘path’ created by inferring new elements of identity is highlighted in the ‘critical information’ panel. Individual attribution exercises can be understood as paths through a number of elements. Intuitively the entire realizable ‘capability’ can be modeled as a directed graph, where the elements are nodes and the inferences are represented by links connecting one or more antecedents with a conclusion. The model can be operationalized with two levels of tool support described in this paper, the first is a working prototype, the second is expected to reach prototype by July 2013: Understanding the Model The tool allows a user to easily determine, given a particular set of inferences and attributes, which elements or inferences are of most value to an investigator (or an attacker). The tool is also able to take

  17. Multi-Dimensional Hashed Indexed Metadata System

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    into a globally ordered key space. June 1, 2015 software MDHIM is the software tool for "big data" simulations on high-performance computers. Available for thumbnail of Feynman...

  18. Downhole tool adapted for telemetry

    DOE Patents [OSTI]

    Hall, David R.; Fox, Joe

    2010-12-14

    A cycleable downhole tool such as a Jar, a hydraulic hammer, and a shock absorber adapted for telemetry. This invention applies to other tools where the active components of the tool are displaced when the tool is rotationally or translationally cycled. The invention consists of inductive or contact transmission rings that are connected by an extensible conductor. The extensible conductor permits the transmission of the signal before, after, and during the cycling of the tool. The signal may be continuous or intermittent during cycling. The invention also applies to downhole tools that do not cycle, but in operation are under such stress that an extensible conductor is beneficial. The extensible conductor may also consist of an extensible portion and a fixed portion. The extensible conductor also features clamps that maintain the conductor under stresses greater than that seen by the tool, and seals that are capable of protecting against downhole pressure and contamination.

  19. Tool and Fixture Design

    SciTech Connect (OSTI)

    Graham, Mark W.

    2015-07-28

    In a manufacturing process, a need is identified and a product is created to fill this need. While design and engineering of the final product is important, the tools and fixtures that aid in the creation of the final product are just as important, if not more so. Power supplies assembled at the TA-55 PF-5 have been designed by an excellent engineering team. The task in PF-5 now is to ensure that all steps of the assembly and manufacturing process can be completed safely, reliably, and in a quality repeatable manner. One of these process steps involves soldering fine wires to an electrical connector. During the process development phase, the method of soldering included placing the power supply in a vice in order to manipulate it into a position conducive to soldering. This method is unacceptable from a reliability, repeatability, and ergonomic standpoint. To combat these issues, a fixture was designed to replace the current method. To do so, a twelve step engineering design process was used to create the fixture that would provide a solution to a multitude of problems, and increase the safety and efficiency of production.

  20. PD and CL Tool

    Energy Science and Technology Software Center (OSTI)

    2007-03-01

    This software is a tool used to quickly solve for probability of success and confidence calculations for binomial data. This is the equation that allows the calculation of confidence level based on the target probability of success, the number of trials in a test and the number of misses (failed trials) allowed in a test plan. This equation is difficult to use and for plans other than when the number of misses allowed is zeromore » the equation cannot be solved algebraically for the number of trials required. The equation then has to be solved numerically for the number or required trials by repeatedly guessing numbers of trials and solving the equation until the confidence level is met or exceeded. This process is tiresome when done manually but the equation is easily programmed into a computer. Tables of these results can be found in statistical texts and on the internet. This software program allows the user to quickly solve the equation by plugging in the known values and solving the equation.« less

  1. Hazard index for underground toxic material

    SciTech Connect (OSTI)

    Smith, C.F.; Cohen, J.J.; McKone, T.E.

    1980-06-01

    To adequately define the problem of waste management, quantitative measures of hazard must be used. This study reviews past work in the area of hazard indices and proposes a geotoxicity hazard index for use in characterizing the hazard of toxic material buried underground. Factors included in this index are: an intrinsic toxicity factor, formulated as the volume of water required for dilution to public drinking-water levels; a persistence factor to characterize the longevity of the material, ranging from unity for stable materials to smaller values for shorter-lived materials; an availability factor that relates the transport potential for the particular material to a reference value for its naturally occurring analog; and a correction factor to accommodate the buildup of decay progeny, resulting in increased toxicity.

  2. Evolution of the spectral index after inflation

    SciTech Connect (OSTI)

    Asgari, A.A.; Abbassi, A.H. E-mail: ahabbasi@modares.ac.ir

    2014-09-01

    In this article we investigate the time evolution of the adiabatic (curvature) and isocurvature (entropy) spectral indices after inflation era for all cosmological scales with two different initial conditions. For this purpose, we first extract an explicit equation for the time evolution of the comoving curvature perturbation (which may be known as the generalized Mukhanov-Sasaki equation). It would be cleared that the evolution of adiabatic spectral index severely depends on the initial conditions moreover, as expected it is constant only for the super-Hubble scales and adiabatic initial conditions. Additionally, the adiabatic spectral index after recombination approaches a constant value for the isocurvature perturbations. Finally, we re-investigate the Sachs-Wolfe effect and show that the fudge factor  1/3 in the adiabatic ordinary Sachs-Wolfe formula must be replaced by 0.4.

  3. Matched Index of Refraction Flow Facility

    ScienceCinema (OSTI)

    Mcllroy, Hugh

    2013-05-28

    What's 27 feet long, 10 feet tall and full of mineral oil (3000 gallons' worth)? If you said INL's Matched Index of Refraction facility, give yourself a gold star. Scientists use computers to model the inner workings of nuclear reactors, and MIR helps validate those models. INL's Hugh McIlroy explains in this video. You can learn more about INL energy research at the lab's facebook site http://www.facebook.com/idahonationallaboratory.

  4. Demand Response Quick Assessment Tool

    Energy Science and Technology Software Center (OSTI)

    2008-12-01

    DRQAT (Demand Response Quick Assessment Tool) is the tool for assessing demand response saving potentials for large commercial buildings. This tool is based on EnergyPlus simulations of prototypical buildings and HVAC equipment. The opportunities for demand reduction and cost savings with building demand responsive controls vary tremendously with building type and location. The assessment tools will predict the energy and demand savings, the economic savings, and the thermal comfor impact for various demand responsive strategies.more » Users of the tools will be asked to enter the basic building information such as types, square footage, building envelope, orientation, utility schedule, etc. The assessment tools will then use the prototypical simulation models to calculate the energy and demand reduction potential under certain demand responsive strategies, such as precooling, zonal temperature set up, and chilled water loop and air loop set points adjustment.« less

  5. Cool Farm Tool | Open Energy Information

    Open Energy Info (EERE)

    aboutussuppliersustainablesourcingtools?WT.LHNAV Cost: Free Language: English Cool Farm Tool Screenshot References: Cool Farm Tool 1 Overview "The Cool Farm Tool...

  6. Energy Transition Initiative Energy Scenario Tool | Department...

    Energy Savers [EERE]

    Energy Transition Initiative Energy Scenario Tool Energy Transition Initiative Energy Scenario Tool The ETI Energy Scenario Tool helps communities analyze different pathways to ...

  7. Data and Tools | Concentrating Solar Power | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Data and Tools The following data and tools with respect to concentrating solar power (CSP) include databases, maps, and tools produced almost exclusively by the National Renewable ...

  8. Measurement of electroweak production of two jets in association with a Z boson in proton-proton collisions at ?s = 8 TeV

    SciTech Connect (OSTI)

    Khachatryan, V.

    2015-02-10

    The purely electroweak (EW) cross section for the production of two jets in association with a Z boson, in proton-proton collisions at ?s = 8 TeV, is measured using data recorded by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of 19.7 fb-1. The electroweak cross section for the lljj final state (with l = e or ? and j representing the quarks produced in the hard interaction) in the kinematic region defined by Mll> 50 GeV, Mjj > 120 GeV, transverse momentum pTj > 25 GeV, and pseudorapidity |?j| < 5, is found to be ?EW(lljj) = 174 15 (stat) 40 (syst) fb, in agreement with the standard model prediction. The associated jet activity of the selected events is studied, in particular in a signal-enriched region of phase space, and the measurements are found to be in agreement with QCD predictions.

  9. Measurement of electroweak production of two jets in association with a Z boson in proton-proton collisions at $\\sqrt{s}=8\\,\\text {TeV}$

    SciTech Connect (OSTI)

    Khachatryan, Vardan

    2015-02-10

    The purely electroweak (EW) cross section for the production of two jets in association with a Z boson, in proton–proton collisions at √s=8TeV, is measured using data recorded by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of 19.7fb-1. We also defined the electroweak cross section for the ℓℓjj final state (with ℓ=e or μ and j representing the quarks produced in the hard interaction) in the kinematic region by Mℓℓ>50 GeV, Mjj>120GeV, transverse momentum pTj>25 GeV, and pseudorapidity |ηj|<5, is found to be σEW(ℓℓjj)=174±15(stat)±40(syst)\\,fb, in agreement with the standard model prediction. Finallly, the associated jet activity of the selected events is studied, in particular in a signal-enriched region of phase space, and the measurements are found to be in agreement with QCD predictions.

  10. Measurement of electroweak production of two jets in association with a Z boson in proton-proton collisions at $$\\sqrt{s}=8\\,\\text {TeV}$$

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Khachatryan, Vardan

    2015-02-10

    The purely electroweak (EW) cross section for the production of two jets in association with a Z boson, in proton–proton collisions at √s=8TeV, is measured using data recorded by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of 19.7fb-1. We also defined the electroweak cross section for the ℓℓjj final state (with ℓ=e or μ and j representing the quarks produced in the hard interaction) in the kinematic region by Mℓℓ>50 GeV, Mjj>120GeV, transverse momentum pTj>25 GeV, and pseudorapidity |ηj|<5, is found to be σEW(ℓℓjj)=174±15(stat)±40(syst)\\,fb, in agreement with the standard model prediction. Finallly, the associated jetmore » activity of the selected events is studied, in particular in a signal-enriched region of phase space, and the measurements are found to be in agreement with QCD predictions.« less

  11. Operational aspects of an externally driven neutron multiplier assembly concept using a Z-pinch 14-MeV Neutron Source (ZEDNA).

    SciTech Connect (OSTI)

    Smith, David Lewis; Heames, Terence John; Parma, Edward J., Jr.; Peters, Curtis D.; Suo-Anttila, Ahti Jorma

    2007-09-01

    This report documents the key safety and operational aspects of a Z-pinch Externally Driven Nuclear Assembly (ZEDNA) reactor concept which is envisioned to be built and operated at the Z-machine facility in Technical Area IV. Operating parameters and reactor neutronic conditions are established that would meet the design requirements of the system. Accident and off-normal conditions are analyzed using a point-kinetics, one-dimensional thermo-mechanical code developed specifically for ZEDNA applications. Downwind dose calculations are presented to determine the potential dose to the collocated worker and public in the event of a hypothetical catastrophic accident. Current and magnetic impulse modeling and the debris shield design are examined for the interface between the Z machine and the ZEDNA. This work was performed as part of the Advanced Fusion Grand Challenge Laboratory Directed Research and Development Program. The conclusion of this work is that the ZEDNA concept is feasible and could be operated at the Z-machine facility without undue risk to collocated workers and the public.

  12. Prioritization Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Emerging Technologies » Prioritization Tool Prioritization Tool For optimal performance, BTO seeks to closely link its portfolio of resources to its strategies and planning process. BTO has developed the Prioritization Tool to provide analytical support for its programmatic decision-making and to further accelerate the transformation of the U.S. building energy efficiency sector. Rigorous analysis of the diverse project portfolio provides guidance to more effectively meet program goals. Vision

  13. Analysis Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Analysis Tools Analysis Tools The Department of Energy's Vision Create a set of interoperable tools that provide insight on building energy performance and drive action in the market. The Problem A lot of data. More buildings are creating energy data now than ever before, due to advances in technology, markets, and policies. While data in some areas, such as energy consumption, is becoming easier to collect, other types of data, such as physical attributes, is still hard to collect. But a lack

  14. Analytical Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Resources » Analytical Tools Analytical Tools The Bioenergy Technologies Office and its national lab partners provide a variety of online tools to help analyze data and facilitate decision making. This page links to several of them and includes a widget that calculates the potential volume of ethanol produced from biomass feedstocks. Knowledge Discovery Framework (KDF): The Bioenergy Knowledge Discovery Framework (KDF) facilitates informed decision making by providing a means to

  15. Computers as tools

    SciTech Connect (OSTI)

    Eriksson, I.V.

    1994-12-31

    The following message was recently posted on a bulletin board and clearly shows the relevance of the conference theme: {open_quotes}The computer and digital networks seem poised to change whole regions of human activity -- how we record knowledge, communicate, learn, work, understand ourselves and the world. What`s the best framework for understanding this digitalization, or virtualization, of seemingly everything? ... Clearly, symbolic tools like the alphabet, book, and mechanical clock have changed some of our most fundamental notions -- self, identity, mind, nature, time, space. Can we say what the computer, a purely symbolic {open_quotes}machine,{close_quotes} is doing to our thinking in these areas? Or is it too early to say, given how much more powerful and less expensive the technology seems destinated to become in the next few decades?{close_quotes} (Verity, 1994) Computers certainly affect our lives and way of thinking but what have computers to do with ethics? A narrow approach would be that on the one hand people can and do abuse computer systems and on the other hand people can be abused by them. Weli known examples of the former are computer comes such as the theft of money, services and information. The latter can be exemplified by violation of privacy, health hazards and computer monitoring. Broadening the concept from computers to information systems (ISs) and information technology (IT) gives a wider perspective. Computers are just the hardware part of information systems which also include software, people and data. Information technology is the concept preferred today. It extends to communication, which is an essential part of information processing. Now let us repeat the question: What has IT to do with ethics? Verity mentioned changes in {open_quotes}how we record knowledge, communicate, learn, work, understand ourselves and the world{close_quotes}.

  16. Smart Grid Tools and Technology

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... Partnerships Tribal Energy Program Intellectual ... to be employed by communities (cities, towns, counties, and tribal lands) to ... and tools (including energy storage) are ...

  17. Solar Glare Hazard Analysis Tool

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Stationary Power Energy Conversion Efficiency Solar Energy Wind Energy Water Power ... ActivitiesBalance of Systems and Soft CostsSolar Glare Hazard Analysis Tool Solar ...

  18. Slide system for machine tools

    DOE Patents [OSTI]

    Douglass, S.S.; Green, W.L.

    1980-06-12

    The present invention relates to a machine tool which permits the machining of nonaxisymmetric surfaces on a workpiece while rotating the workpiece about a central axis of rotation. The machine tool comprises a conventional two-slide system (X-Y) with one of these slides being provided with a relatively short travel high-speed auxiliary slide which carries the material-removing tool. The auxiliary slide is synchronized with the spindle speed and the position of the other two slides and provides a high-speed reciprocating motion required for the displacement of the cutting tool for generating a nonaxisymmetric surface at a selected location on the workpiece.

  19. Global Pathways Analysis Tool (GPAT)

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Pathways Analysis Tool (GPAT) (Sandia National Laboratories) Objectives Calculate least-cost pathways for hydrogen supply for eight participating countries: France, Germany, ...

  20. Analysis of Cluster Management Tools

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Analysis of Configuration Management Tools Computer System, Cluster, and Networking Summer Institute Team: Evan Leeseberg, James Kang, Katherine Nystrom Mentors: Kevin Tegtmeier,...

  1. Data and Tools | Bioenergy | NREL

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    NREL provides data, tools, and models for analyzing bioenergy research and technologies, ... BioEnergy Atlas This atlas contains two interactive maps for comparing biomass feedstock, ...

  2. Indexes to Nuclear Regulatory Commission issuances, July--September 1997

    SciTech Connect (OSTI)

    1998-03-01

    This digest and index lists the Nuclear Regulatory Commission (NRC) issuances for July to September 1997. Issuances are from the Commission, the Atomic Safety and Licensing Boards, the Administrative Law Judges, the Directors` Decisions, and the Decisions on Petitions for Rulemaking. There are five sections to this index: (1) case name index, (2) headers and digests, (3) legal citations index, (4) subject index, and (5) facility index. The digest provides a brief narrative of the issue, including the resolution of the issue and any legal references used for resolution.

  3. MotorMaster+ Tool | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    MotorMaster+ Tool MotorMaster+ Tool This presentation discusses industrial motor systems and introduces the MotorMaster+ Tool Suite. MotorMaster+ Tool Presentation (March 19, 2009) ...

  4. Form:Tool | Open Energy Information

    Open Energy Info (EERE)

    Tool (Redirected from Form:Software Tool) Jump to: navigation, search Input your tool name below to add to the registry. If the tool is already in the registry, you will be able to...

  5. Tools for OpenMP

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    OpenMP Tools for OpenMP Some tools for tuning OpenMP codes to get better performance are: Use Intel Advisor for Threading Design and Vectorization. Use Intel Inspector to Detect Threading and Memory Issues. Use Intel VTune for Performance Tuning. Use Cray Reveal to Insert OpenMP Directives. Last edited: 2016-08-26 11:49:18

  6. Battery switch for downhole tools

    DOE Patents [OSTI]

    Boling, Brian E.

    2010-02-23

    An electrical circuit for a downhole tool may include a battery, a load electrically connected to the battery, and at least one switch electrically connected in series with the battery and to the load. The at least one switch may be configured to close when a tool temperature exceeds a selected temperature.

  7. Rib forming tool for tubing

    DOE Patents [OSTI]

    Rowley, James P.; Lewandowski, Edward F.; Groh, Edward F.

    1976-01-01

    Three cylindrical rollers are rotatably mounted equidistant from the center of a hollow tool head on radii spaced 120.degree. apart. Each roller has a thin flange; the three flanges lie in a single plane to form an internal circumferential rib in a rotating tubular workpiece. The tool head has two complementary parts with two rollers in one part of the head and one roller in the other part; the two parts are joined by a hinge. A second hinge, located so the rollers are between the two hinges, connects one of the parts to a tool bar mounted in a lathe tool holder. The axes of rotation of both hinges and all three rollers are parallel. A hole exposing equal portions of the three roller flanges is located in the center of the tool head. The two hinges permit the tool head to be opened and rotated slightly downward, taking the roller flanges out of the path of the workpiece which is supported on both ends and rotated by the lathe. The parts of the tool head are then closed on the workpiece so that the flanges are applied to the workpiece and form the rib. The tool is then relocated for forming of the next rib.

  8. Vehicle assisted harpoon breaching tool

    DOE Patents [OSTI]

    Pacheco, James E.; Highland, Steven E.

    2011-02-15

    A harpoon breaching tool that allows security officers, SWAT teams, police, firemen, soldiers, or others to forcibly breach metal doors or walls very quickly (in a few seconds), without explosives. The harpoon breaching tool can be mounted to a vehicle's standard receiver hitch.

  9. Information Technology Tools for Multifamily Building Programs...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Technology Tools for Multifamily Building Programs Information Technology Tools for Multifamily Building Programs Better Buildings Neighborhood Program Multifamily ...

  10. Logistics Process Analysis ToolProcess Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2008-03-31

    LPAT is the resulting integrated system between ANL-developed Enhanced Logistics Intra Theater Support Tool (ELIST) sponsored by SDDC-TEA and the Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the process Anlysis Tool (PAT) which evolved into a stand=-along tool for detailed process analysis at a location. Combined with ELIST, an inter-installation logistics component wasmore » added to enable users to define large logistical agent-based models without having to program. PAT is the evolution of an ANL-developed software system called Fort Future Virtual Installation Tool (sponsored by CERL). The Fort Future Simulation Engine was an application written in the ANL Repast Simphony framework and used as the basis for the Process Analysis Tool(PAT) which evolved into a stand-alone tool for detailed process analysis at a location (sponsored by the SDDC-TEA).« less

  11. Compressing bitmap indexes for faster search operations

    SciTech Connect (OSTI)

    Wu, Kesheng; Otoo, Ekow J.; Shoshani, Arie

    2002-04-25

    In this paper, we study the effects of compression on bitmap indexes. The main operations on the bitmaps during query processing are bitwise logical operations such as AND, OR, NOT, etc. Using the general purpose compression schemes, such as gzip, the logical operations on the compressed bitmaps are much slower than on the uncompressed bitmaps. Specialized compression schemes, like the byte-aligned bitmap code(BBC), are usually faster in performing logical operations than the general purpose schemes, but in many cases they are still orders of magnitude slower than the uncompressed scheme. To make the compressed bitmap indexes operate more efficiently, we designed a CPU-friendly scheme which we refer to as the word-aligned hybrid code (WAH). Tests on both synthetic and real application data show that the new scheme significantly outperforms well-known compression schemes at a modest increase in storage space. Compared to BBC, a scheme well-known for its operational efficiency, WAH performs logical operations about 12 times faster and uses only 60 percent more space. Compared to the uncompressed scheme, in most test cases WAH is faster while still using less space. We further verified with additional tests that the improvement in logical operation speed translates to similar improvement in query processing speed.

  12. Lessons Learned Quarterly Report Cumulative Index | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Guidance & Requirements » Lessons Learned » Lessons Learned Quarterly Report Cumulative Index Lessons Learned Quarterly Report Cumulative Index The LLQR is produced as a means of disseminating NEPA program metrics, along with related guidance, case studies, analysis, references, litigation updates, and resource information. The LLQR Cumulative Index contains topical listings with citations to relevant articles included in past LLQR issues. LLQR_Index_Dec_2012.pdf (347.36 KB) More Documents

  13. Electrical contact tool set station

    DOE Patents [OSTI]

    Byers, M.E.

    1988-02-22

    An apparatus is provided for the precise setting to zero of electrically conductive cutting tools used in the machining of work pieces. An electrically conductive cylindrical pin, tapered at one end to a small flat, rests in a vee-shaped channel in a base so that its longitudinal axis is parallel to the longitudinal axis of the machine's spindle. Electronic apparatus is connected between the cylindrical pin and the electrically conductive cutting tool to produce a detectable signal when contact between tool and pin is made. The axes of the machine are set to zero by contact between the cutting tool and the sides, end or top of the cylindrical pin. Upon contact, an electrical circuit is completed, and the detectable signal is produced. The tool can then be set to zero for that axis. Should the tool contact the cylindrical pin with too much force, the cylindrical pin would be harmlessly dislodged from the vee-shaped channel, preventing damage either to the cutting tool or the cylindrical pin. 5 figs.

  14. Crystallographic analysis of the solid-state dewetting of polycrystalline gold film using automated indexing in a transmission electron microscope

    SciTech Connect (OSTI)

    Jang, S. A.; Lee, H. J.; Oh, Y. J.; Thompson, C. V.; Ross, C. A.

    2015-12-01

    We analyzed the effect of crystallographic anisotropy on the morphological evolution of a 12-nm-thick gold film during solid-state dewetting at high temperatures using automated indexing tool in a transmission electron microscopy. Dewetting initiated at grain-boundary triple junctions adjacent to large grains resulting from abnormal grain growth driven by (111) texture development. Voids at the junctions developed shapes with faceted edges bounded by low-index crystal planes. The kinetic mobility of the edges varied with the crystal orientation normal to the edges, with a predominance of specific edges with the slowest retraction rates as the annealing time was increased.

  15. Tool Basics | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Commercial Buildings » Analysis Tools » Energy Asset Score » Tool Basics Tool Basics Asset Score Scale The Asset Score uses a 10-point scale to evaluate the energy efficiency of a building's physical characteristics and major energy-related systems. The point value is assigned based on a building's predicted source energy use intensity (EUI) according to the energy simulation results. Scores are rounded to the nearest half-point increment (i.e., "6", "6.5", "7",

  16. DC Pro Software Tool Suite

    SciTech Connect (OSTI)

    2009-04-01

    This fact sheet describes how DOE's Data Center Energy Profiler (DC Pro) Software Tool Suite and other resources can help U.S. companies identify ways to improve the efficiency of their data centers.

  17. Tool | OpenEI Community

    Open Energy Info (EERE)

    by Graham7781(2017) Super contributor 26 June, 2013 - 09:17 NREL's Energy Databus storing big energy data campus databus energy meter data NREL OpenEI Tool The Energy Databus began...

  18. Management System Verification (MSV) Tool

    Broader source: Energy.gov [DOE]

    The MSV process developed by ACC is a tool (not a requirement) that DOE sites may consider to help determine whether their ES&H program is truly integrated into all work at all levels by all employees.

  19. Human Factors Engineering Analysis Tool

    Energy Science and Technology Software Center (OSTI)

    2002-03-04

    HFE-AT is a human factors engineering (HFE) software analysis tool (AT) for human-system interface design of process control systems, and is based primarily on NUREG-0700 guidance.

  20. Fan System Assessment Tool Introduction

    Broader source: Energy.gov [DOE]

    This presentation provides an introduction to the Fan System Assessment Tool (FSAT). With FSAT, users can calculate the amount of energy used by their fan system; determine system efficiency; and quantify the savings potential of an upgraded system.

  1. QuickPEP Tool Demonstration

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    QuickPEP Tool Demonstration Riyaz Papar, PE, CEM Director, Energy Assets & Optimization ... * Plant Energy Profiling * QuickPEP Demonstration * New features in Quick 2.0 * Wrap Up ...

  2. Compressed Air Best Practices Tools Overview

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Compressed Air Best Practices Tools Compressed Air Challenge® DOE AIRMaster+ Software CAC LogTool Software Date: May 15, 2007 Instructor: Tom Taranto Agenda Training Webcast Introduction Introduction of Tools - 10 minutes Compressed Air Challenge ® Tools - 25 minutes AIRMaster+ Software Tool - 25 minutes LogTool v2 - 25 minutes ESA Process - 20 minutes Q&A / Summary - 15 minutes Training Web Cast Series Purpose: To provide information on Compressed Air BestPractices tools used during DOE's

  3. Eastern Energy Zones Mapping Tool

    Broader source: Energy.gov [DOE]

    The Eastern Interconnection States’ Planning Council (EISPC) has released the Energy Zones (EZ) Mapping Tool, a free, web-based interactive tool that will help states and other stakeholders in the Eastern Interconnection identify geographic areas suitable for the development of clean energy resources (natural gas, sequestration or utilitization locations for C02 from coal, nuclear, and renewable) which can potentially provide significant amounts of new electric power generation.

  4. Prototype simplified daylighting design tool

    SciTech Connect (OSTI)

    Treado, S.J.; Goodin, P.J.

    1992-07-01

    The report describes a prototype simplified design tool which has been developed to provide information for developing effective building fenestration systems. A computer software system was developed to search through and select the best available fenestration designs from a large database of previously simulated buildings. Fenestration designs can be selected based on energy usage, energy cost or peak loads. The determination of fenestration energy costs is discussed. The design tool is primarily intended for commercial, industrial or institutional buildings of any type.

  5. Bonding Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Bonding Tools Bonding Tools Bonds are one of the most common forms of financing used by state and local governments, because they are a low-cost source of capital available to most entities. State and local officials may consider using bonds for a variety of clean energy purposes, including: Financing a specific set of energy upgrades in their own facilities (can be combined with an energy savings performance contract) Capitalizing finance programs (e.g., revolving loan fund) for public sector

  6. Seal for fluid forming tools

    DOE Patents [OSTI]

    Golovashchenko, Sergey Fedorovich; Bonnen, John Joseph Francis

    2012-03-20

    An electro-hydraulic forming tool for forming a sheet metal blank in a one-sided die has first and second rigid rings that engage opposite sides of a sheet metal blank. The rigid rings are contained within slots on a die portion and a hydraulic force applicator portion of the forming tool. The seals are either resiliently biased by an elastomeric member or inherently resiliently biased into contact with the blank.

  7. Collaboration Tools | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Information Systems » Collaboration Tools Collaboration Tools Collaboration is much more than just sharing information. It is a form of teamwork and a process of exchanging ideas that positively impacts progress. While it is relatively easy to collaborate with your peers in the office, effective collaboration is difficult to achieve within distributed teams without use of technology. In order to bridge the distance between project teams, Office of Project Management Oversight & Assessments

  8. Supercooled liquid water Estimation Tool

    Energy Science and Technology Software Center (OSTI)

    2012-05-04

    The Cloud Supercooled liquid water Estimation Tool (SEET) is a user driven Graphical User Interface (GUI) that estimates cloud supercooled liquid water (SLW) content in terms of vertical column and total mass from Moderate resolution Imaging Supercooled liquid water Estimation Tool Spectroradiometer (MODIS) spatially derived cloud products and realistic vertical cloud parameterizations that are user defined. It also contains functions for post-processing of the resulting data in tabular and graphical form.

  9. Evaluation of Potential LSST Spatial Indexing Strategies

    SciTech Connect (OSTI)

    Nikolaev, S; Abdulla, G; Matzke, R

    2006-10-13

    The LSST requirement for producing alerts in near real-time, and the fact that generating an alert depends on knowing the history of light variations for a given sky position, both imply that the clustering information for all detections is available at any time during the survey. Therefore, any data structure describing clustering of detections in LSST needs to be continuously updated, even as new detections are arriving from the pipeline. We call this use case ''incremental clustering'', to reflect this continuous updating of clustering information. This document describes the evaluation results for several potential LSST incremental clustering strategies, using: (1) Neighbors table and zone optimization to store spatial clusters (a.k.a. Jim Grey's, or SDSS algorithm); (2) MySQL built-in R-tree implementation; (3) an external spatial index library which supports a query interface.

  10. Structures with negative index of refraction

    DOE Patents [OSTI]

    Soukoulis, Costas M.; Zhou, Jiangfeng; Koschny, Thomas; Zhang, Lei; Tuttle, Gary

    2011-11-08

    The invention provides simplified negative index materials (NIMs) using wire-pair structures, 4-gap single ring split-ring resonator (SRR), fishnet structures and overleaf capacitor SRR. In the wire-pair arrangement, a pair of short parallel wires and continuous wires are used. In the 4-gap single-ring SRR, the SRRs are centered on the faces of a cubic unit cell combined with a continuous wire type resonator. Combining both elements creates a frequency band where the metamaterial is transparent with simultaneously negative .di-elect cons. and .mu.. In the fishnet structure, a metallic mesh on both sides of the dielectric spacer is used. The overleaf capacitor SRR changes the gap capacities to small plate capacitors by making the sections of the SRR ring overlap at the gaps separated by a thin dielectric film. This technique is applicable to conventional SRR gaps but it best deploys for the 4-gap single-ring structures.