National Library of Energy BETA

Sample records for toman medidas para

  1. Los lideres de energia en EEUU toman medidas para desarrollar la Alianza de

    Office of Environmental Management (EM)

    Energia y Clima de las Americas | Department of Energy lideres de energia en EEUU toman medidas para desarrollar la Alianza de Energia y Clima de las Americas Los lideres de energia en EEUU toman medidas para desarrollar la Alianza de Energia y Clima de las Americas June 16, 2009 - 12:00am Addthis In English LIMA, PERÚ - Ministros de energía y otros líderes de energía de gobiernos de a través de las Américas se reunieron con corporaciones de energía y otros expertos en Lima, el 15 y

  2. Los lideres de energia en EEUU toman medidas para desarrollar...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Desde la Cumbre en abril, respuesta regional ha sido inmensamente positiva a travs de los cinco elementos de ECPA: la eficiencia energtica, la energa renovable, los ...

  3. La Primera Medida de la Seccin Eficaz

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Teppei Katori, MIT 6 Modeling of meson production is based on the measurement done by HARP collaboration - Identical, but 5% Beryllium target - 8.9 GeVc proton beam momentum...

  4. PROGRAMA DE IGUALDAD DE ACCESO PARA PUERTO RICO: Recursos de...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    registro del usuario, una cuota de suscripcin, o algn otro tipo de cuota para tener acceso a artculos en texto completo. Importar Citaciones a un Programa de...

  5. Herramientas para desarrollar proyectos de ERNC | Open Energy...

    Open Energy Info (EERE)

    Herramientas para desarrollar proyectos de ERNC Jump to: navigation, search En esta seccin, se presentan diferentes herramientas tiles a la hora de desarrollar proyectos de...

  6. Analyzing and Visualizing Cosmological Simulations with ParaView (Journal

    Office of Scientific and Technical Information (OSTI)

    Article) | SciTech Connect Journal Article: Analyzing and Visualizing Cosmological Simulations with ParaView Citation Details In-Document Search Title: Analyzing and Visualizing Cosmological Simulations with ParaView The advent of large cosmological sky surveys - ushering in the era of precision cosmology - has been accompanied by ever larger cosmological simulations. The analysis of these simulations, which currently encompass tens of billions of particles and up to a trillion particles in

  7. Ortho- and para-hydrogen in neutron thermalization

    SciTech Connect (OSTI)

    Daemen, L. L.; Brun, T. O.

    1998-01-01

    The large difference in neutron scattering cross-section at low neutron energies between ortho- and para-hydrogen was recognized early on. In view of this difference (more than an order of magnitude), one might legitimately ask whether the ortho/para ratio has a significant effect on the neutron thermalization properties of a cold hydrogen moderator. Several experiments performed in the 60`s and early 70`s with a variety of source and (liquid hydrogen) moderator configurations attempted to investigate this. The results tend to show that the ortho/para ratio does indeed have an effect on the energy spectrum of the neutron beam produced. Unfortunately, the results are not always consistent with each other and much unknown territory remains to be explored. The problem has been approached from a computational standpoint, but these isolated efforts are far from having examined the ortho/para-hydrogen problem in neutron moderation in all its complexity. Because of space limitations, the authors cannot cover, even briefly, all the aspects of the ortho/para question here. This paper will summarize experiments meant to investigate the effect of the ortho/para ratio on the neutron energy spectrum produced by liquid hydrogen moderators.

  8. RVA: A Plugin for ParaView 3.14

    Energy Science and Technology Software Center (OSTI)

    2015-09-04

    RVA is a plugin developed for the 64-bit Windows version of the ParaView 3.14 visualization package. RVA is designed to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize andmore » enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results between selected wells, simplified volumetric calculations, global vertical exaggeration adjustments, ingestion of UTChem simulation results, ingestion of Isatis geostatistical framework models, interrogation of joint geologic and reservoir modeling results, joint visualization and analysis of well history files, location-targeted visualization, advanced correlation analysis, visualization of flow paths, and creation of static images and animations highlighting targeted reservoir features.« less

  9. ParaView Red Blood Cell Tutorial | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ParaView Red Blood Cell Tutorial Goals This tutorial is intended to be a hands-on resource for users interested in learning the basic concepts of ParaView. The examples can easily be run on a laptop, using the example data set provided. Tour of ParaView Show range of visualization methods Walk through various visualization techniques, hopefully illustrate how these can apply to your own data. Feel for ParaView "way" Terminology and step-by-step process peculiar to ParaView, which may

  10. DYNA3D/ParaDyn Regression Test Suite Inventory

    SciTech Connect (OSTI)

    Lin, J I

    2011-01-25

    The following table constitutes an initial assessment of feature coverage across the regression test suite used for DYNA3D and ParaDyn. It documents the regression test suite at the time of production release 10.1 in September 2010. The columns of the table represent groupings of functionalities, e.g., material models. Each problem in the test suite is represented by a row in the table. All features exercised by the problem are denoted by a check mark in the corresponding column. The definition of ''feature'' has not been subdivided to its smallest unit of user input, e.g., algorithmic parameters specific to a particular type of contact surface. This represents a judgment to provide code developers and users a reasonable impression of feature coverage without expanding the width of the table by several multiples. All regression testing is run in parallel, typically with eight processors. Many are strictly regression tests acting as a check that the codes continue to produce adequately repeatable results as development unfolds, compilers change and platforms are replaced. A subset of the tests represents true verification problems that have been checked against analytical or other benchmark solutions. Users are welcomed to submit documented problems for inclusion in the test suite, especially if they are heavily exercising, and dependent upon, features that are currently underrepresented.

  11. Conformation of ionizable poly Para phenylene ethynylene in dilute solutions

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Wijesinghe, Sidath; Maskey, Sabina; Perahia, Dvora; Grest, Gary S.

    2015-11-03

    The conformation of dinonyl poly para phenylene ethynylenes (PPEs) with carboxylate side chains, equilibrated in solvents of different quality is studied using molecular dynamics simulations. PPEs are of interest because of their tunable electro-optical properties, chemical diversity, and functionality which are essential in wide range of applications. The polymer conformation determines the conjugation length and their assembly mode and affects electro-optical properties which are critical in their current and potential uses. The current study investigates the effect of carboxylate fraction on PPEs side chains on the conformation of chains in the dilute limit, in solvents of different quality. The dinonylmore » PPE chains are modeled atomistically, where the solvents are modeled both implicitly and explicitly. Dinonyl PPEs maintained a stretched out conformation up to a carboxylate fraction f of 0.7 in all solvents studied. The nonyl side chains are extended and oriented away from the PPE backbone in toluene and in implicit good solvent whereas in water and implicit poor solvent, the nonyl side chains are collapsed towards the PPE backbone. Thus, rotation around the aromatic ring is fast and no long range correlations are seen within the backbone.« less

  12. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, Frances H. (Pasadena, CA); Moore, Jeffrey C. (Pasadena, CA)

    1999-01-01

    A method for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase.

  13. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, Frances H. (Pasadena, CA); Moore, Jeffrey C. (Pasadena, CA)

    1998-01-01

    A method for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase.

  14. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, F.H.; Moore, J.C.

    1998-04-21

    A method is disclosed for isolating and identifying modified para-nitrobenzyl esterases. These enzymes exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase. 43 figs.

  15. Para-nitrobenzyl esterases with enhanced activity in aqueous and nonaqueous media

    DOE Patents [OSTI]

    Arnold, F.H.; Moore, J.C.

    1999-05-25

    A method is disclosed for isolating and identifying modified para-nitrobenzyl esterases which exhibit improved stability and/or esterase hydrolysis activity toward selected substrates and under selected reaction conditions relative to the unmodified para-nitrobenzyl esterase. The method involves preparing a library of modified para-nitrobenzyl esterase nucleic acid segments (genes) which have nucleotide sequences that differ from the nucleic acid segment which encodes for unmodified para-nitrobenzyl esterase. The library of modified para-nitrobenzyl nucleic acid segments is expressed to provide a plurality of modified enzymes. The clones expressing modified enzymes are then screened to identify which enzymes have improved esterase activity by measuring the ability of the enzymes to hydrolyze the selected substrate under the selected reaction conditions. Specific modified para-nitrobenzyl esterases are disclosed which have improved stability and/or ester hydrolysis activity in aqueous or aqueous-organic media relative to the stability and/or ester hydrolysis activity of unmodified naturally occurring para-nitrobenzyl esterase. 43 figs.

  16. Las tecnogias de energia verde crean trabajos verdes (Green Jobs)

    SciTech Connect (OSTI)

    2010-10-01

    A medida que se comiencen a utilizar comercialmente estas nuevas tecnologías, se crearán nuevos puestos de empleo para los trabajadores norteamericanos.

  17. ParaDiS-FEM dislocation dynamics simulation code primer (Technical...

    Office of Scientific and Technical Information (OSTI)

    When we try to perform discrete dislocation dynamics simulations for finite systems such as thin films or cylinders, the ParaDiS code must be extended. First, dislocations need to ...

  18. ParaDiS-FEM dislocation dynamics simulation code primer (Technical...

    Office of Scientific and Technical Information (OSTI)

    we try to perform discrete dislocation dynamics simulations for finite systems such as thin films or cylinders, the ParaDiS code must be extended. First, dislocations need to be...

  19. Vehicle Technologies Office Merit Review 2015: ParaChoice: Parametric Vehicle Choice Modeling

    Broader source: Energy.gov [DOE]

    Presentation given by Sandia National Laboratory at 2015 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about ParaChoice:...

  20. Experiments at Scale with In-Situ Visualization Using ParaView/Catalyst in RAGE

    SciTech Connect (OSTI)

    Kares, Robert John

    2014-10-31

    In this paper I describe some numerical experiments performed using the ParaView/Catalyst in-situ visualization infrastructure deployed in the Los Alamos RAGE radiation-hydrodynamics code to produce images from a running large scale 3D ICF simulation on the Cielo supercomputer at Los Alamos. The detailed procedures for the creation of the visualizations using ParaView/Catalyst are discussed and several images sequences from the ICF simulation problem produced with the in-situ method are presented. My impressions and conclusions concerning the use of the in-situ visualization method in RAGE are discussed.

  1. SE HAN FINALIZADO LOS PREPARATIVOS PARA LA CONFERENCIA NACIONAL DE JUSTICIA MEDIOAMBIENTAL Y PROGRAMA DE FORMACIÓN 2013

    Broader source: Energy.gov [DOE]

    La National Environmental Justice Conference, Inc. (Conferencia de Justicia Medioambiental) se prepara para otro exitoso acontecimiento, ya que se aproxima la Conferencia Nacional de Justicia...

  2. The ortho:para ratio of H{sub 3}{sup +} in laboratory and astrophysical plasmas

    SciTech Connect (OSTI)

    Crabtree, Kyle N.; Indriolo, Nick; Kreckel, Holger; McCall, Benjamin J.

    2015-01-22

    The discovery of H{sub 3}{sup +} in the diffuse interstellar medium has dramatically changed our view of the cosmic-ray ionization rate in diffuse molecular clouds. However, another surprise has been that the ortho:para ratio of H{sub 3}{sup +} in these clouds is inconsistent with the temperature derived from the excitation of H{sub 2}, the dominant species in these clouds. In an effort to understand this discrepancy, we have embarked on an experimental program to measure the nuclear spin dependence of the dissociative electron recombination rate of H{sub 3}{sup +} using the CRYRING and TSR ion storage rings. We have also performed the first measurements of the reaction H{sub 3}{sup +}+H{sub 2}→H{sub 2}+H{sub 3}{sup +} below room temperature. This reaction is likely the most common bimolecular reaction in the universe, and plays an important role in interconverting ortho- and para-H{sub 3}{sup +}. Finally, we have constructed a steady-state chemical model for diffuse clouds, which takes into account the spin-dependence of the formation of H{sub 3}{sup +}, its electron recombination, and its reaction with H{sub 2}. We find that the ortho:para ratio of H{sub 3}{sup +} in diffuse clouds is likely governed by a competition between dissociative recombination and thermalization by reactive collisions.

  3. Preparation of ortho-para ratio controlled D{sub 2} gas for muon-catalyzed fusion

    SciTech Connect (OSTI)

    Imao, H.; Ishida, K.; Matsuzaki, T.; Matsuda, Y.; Iwasaki, M.; Kawamura, N.; Strasser, P.; Toyoda, A.; Nagamine, K.

    2008-05-15

    A negative muon in hydrogen targets, e.g., D{sub 2} or D-T mixture, can catalyze nuclear fusions following a series of atomic processes involving muonic hydrogen molecular formation (muon-catalyzed fusion, {mu}CF). The ortho-para state of D{sub 2} is a crucial parameter not only for enhancing the fusion rate but also to precisely investigate various muonic atom processes. We have developed a system for controlling and measuring the ortho-para ratio of D{sub 2} gas for {mu}CF experiments. We successfully collected para-enriched D{sub 2} without using liquid-hydrogen coolant. Ortho-enriched D{sub 2} was also obtained by using a catalytic conversion method with a mixture of chromium oxide and alumina. The ortho-para ratio of D{sub 2} gas was measured with a compact Raman spectroscopy system. We produced large volume (5-30 l at STP), high-purity (less than ppm high-Z contaminant) D{sub 2} targets with a wide range of ortho-para ratios (ortho 20%-99%). By using the ortho-para controlled D{sub 2} in {mu}CF experiments, we observed the dependence of {mu}CF phenomena on the ortho-para ratio.

  4. ParaDyn Implementation in the US Navy's DYSMAS Simulation System: FY08 Progress Report

    SciTech Connect (OSTI)

    Ferencz, R M; DeGroot, A J; Lin, J I; Zywicz, E; Durrenberger, J K; Sherwood, R J; Corey, I R

    2008-07-29

    The goal of this project is to increase the computational efficiency and capacity of the Navy's DYSMAS simulation system for full ship shock response to underwater explosion. Specifically, this project initiates migration to a parallel processing capability for the structural portion of the overall fluid-structure interaction model. The capstone objective for the first phase is to demonstrate operation of the DYSMAS simulation engine with a production model on a Naval Surface Warfare Center (IHD) parallel platform using the ParaDyn code for parallel processing of the structural dynamics. This year saw a successful launch to integrate ParaDyn, the high-parallel structural dynamics code from Lawrence Livermore National Laboratory (LLNL), into the DYSMAS system for simulating the response of ship structures to underwater explosion (UNDEX). The current LLNL version of DYNA3D, representing ten years of general development beyond the source branch used to initiate DYNA-N customization for DYSMAS, was first connected to the GEMINI flow code through DYSMAS Standard Coupler Interface (SCI). This permitted an early 'sanity check' by Naval Surface Warfare Center, Indian Head Division (NSWC-IHD) personnel that equivalent results were generated for their standard UNDEX test problems, thus ensuring the Verification & Validation pedigree they have developed remains intact. The ParaDyn code was then joined to the SCI in a manner requiring no changes to GEMINI. Three NSWC-IHD engineers were twice hosted at LLNL to become familiar with LLNL computer systems, the execution of the prototype software system, and to begin assessment of its accuracy and performance. Scaling data for the flow solver GEMINI was attained up to a one billion cell, 1000 processor run. The NSWC-IHD engineers were granted privileges to continue their evaluations through remote connections to LLNL's Open Computing Facility. Finally, the prototype changes were integrated into the mainline ParaDyn source repository and issued as part of its Version 8.1 beta release. This source was transmitted to NSWC-IHD and in collaboration with LLNL personnel the entire ParaDyn software suite successfully installed and demonstrated on its new SGI Altix machine. The ability of even minor numbers of processors for the structural dynamics to impact overall time-to-solution for DYSMAS has been demonstrated. Assessments of combined parallel efficiencies are beginning to highlight areas for further DYSMAS optimizations.

  5. In-Situ Visualization Experiments with ParaView Cinema in RAGE

    SciTech Connect (OSTI)

    Kares, Robert John

    2015-10-15

    A previous paper described some numerical experiments performed using the ParaView/Catalyst in-situ visualization infrastructure deployed in the Los Alamos RAGE radiation-hydrodynamics code to produce images from a running large scale 3D ICF simulation. One challenge of the in-situ approach apparent in these experiments was the difficulty of choosing parameters likes isosurface values for the visualizations to be produced from the running simulation without the benefit of prior knowledge of the simulation results and the resultant cost of recomputing in-situ generated images when parameters are chosen suboptimally. A proposed method of addressing this difficulty is to simply render multiple images at runtime with a range of possible parameter values to produce a large database of images and to provide the user with a tool for managing the resulting database of imagery. Recently, ParaView/Catalyst has been extended to include such a capability via the so-called Cinema framework. Here I describe some initial experiments with the first delivery of Cinema and make some recommendations for future extensions of Cinema’s capabilities.

  6. ORTHO-TO-PARA ABUNDANCE RATIO OF WATER ION IN COMET C/2001 Q4 (NEAT): IMPLICATION FOR ORTHO-TO-PARA ABUNDANCE RATIO OF WATER

    SciTech Connect (OSTI)

    Shinnaka, Yoshiharu; Kawakita, Hideyo; Kobayashi, Hitomi; Boice, Daniel C.; Martinez, Susan E.

    2012-04-20

    The ortho-to-para abundance ratio (OPR) of cometary molecules is considered to be one of the primordial characteristics of cometary ices, and contains information concerning their formation. Water is the most abundant species in cometary ices, and OPRs of water in comets have been determined from infrared spectroscopic observations of H{sub 2}O rovibrational transitions so far. In this paper, we present a new method to derive OPR of water in comets from the high-dispersion spectrum of the rovibronic emission of H{sub 2}O{sup +} in the optical wavelength region. The rovibronic emission lines of H{sub 2}O{sup +} are sometimes contaminated by other molecular emission lines but they are not affected seriously by telluric absorption compared with near-infrared observations. Since H{sub 2}O{sup +} ions are mainly produced from H{sub 2}O by photoionization in the coma, the OPR of H{sub 2}O{sup +} is considered to be equal to that of water based on the nuclear spin conservation through the reaction. We have developed a fluorescence excitation model of H{sub 2}O{sup +} and applied it to the spectrum of comet C/2001 Q4 (NEAT). The derived OPR of water is 2.54{sup +0.32}{sub -0.25}, which corresponds to a nuclear spin temperature (T{sub spin}) of 30{sup +10}{sub -4} K. This is consistent with the previous value determined in the near-infrared for the same comet (OPR = 2.6 {+-} 0.3, T{sub spin} = 31{sup +11}{sub -5} K).

  7. Transient effects and pump depletion in stimulated Raman scattering. [Para-hydrogen

    SciTech Connect (OSTI)

    Carlsten, J.L.; Wenzel, R.G.; Druehl, K.

    1983-01-01

    Stimulated rotational Raman scattering in a 300-K multipass cell filled with para-H/sub 2/ with a single-mode CO/sub 2/-pumped laser is studied using a frequency-narrowed optical parametric oscillator (OPO) as a probe laser at the Stokes frequency for the S/sub 0/(O) transition. Amplification and pump depletion are examined as a function of incident pump energy. The pump depletion shows clear evidence of transient behavior. A theoretical treatment of transient stimulated Raman scattering, including effects of both pump depletion and medium saturation is presented. In a first approximation, diffraction effects are neglected, and only plane-wave interactions are considered. The theoretical results are compared to the experimental pulse shapes.

  8. Searching for Auxetics with DYNA3D and ParaDyn

    SciTech Connect (OSTI)

    Hoover, W G; Hoover, C G

    2004-09-11

    We sought to simulate auxetic behavior by carrying out dynamic analyses of mesoscopic model structures. We began by generating nearly periodic cellular structures. Four-node 'Shell' elements and eight-node 'Brick' elements are the basic building blocks for each cell. The shells and bricks obey standard elastic-plastic continuum mechanics. The dynamical response of the structures was next determined for a three-stage loading process: (1) homogeneous compression; (2) viscous relaxation; (3) uniaxial compression. The simulations were carried out with both serial and parallel computer codes--DYNA3D and ParaDyn--which describe the deformation of the shells and bricks with a robust contact algorithm. We summarize the results found here.

  9. Practical in-situ determination of ortho-para hydrogen ratios via fiber-optic based Raman spectroscopy

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Sutherland, Liese -Marie; Knudson, James N.; Mocko, Michal; Renneke, Richard M.

    2015-12-17

    An experiment was designed and developed to prototype a fiber-optic-based laser system, which measures the ratio of ortho-hydrogen to para-hydrogen in an operating neutron moderator system at the Los Alamos Neutron Science Center (LANSCE) spallation neutron source. Preliminary measurements resulted in an ortho to para ratio of 3.06:1, which is within acceptable agreement with the previously published ratio. As a result, the successful demonstration of Raman Spectroscopy for this measurement is expected to lead to a practical method that can be applied for similar in-situ measurements at operating neutron spallation sources.

  10. Out-of-field organ doses and associated radiogenic risks from para-aortic radiotherapy for testicular seminoma

    SciTech Connect (OSTI)

    Mazonakis, Michalis Berris, Theocharis; Damilakis, John; Varveris, Charalambos; Lyraraki, Efrossyni

    2014-05-15

    Purpose: The aims of this study were to (a) calculate the radiation dose to out-of-field organs from radiotherapy for stage I testicular seminoma and (b) estimate the associated radiogenic risks. Methods: Monte Carlo methodology was employed to model radiation therapy with typical anteroposterior and posteroanterior para-aortic fields on an anthropomorphic phantom simulating an average adult. The radiation dose received by all main and remaining organs that defined by the ICRP publication 103 and excluded from the treatment volume was calculated. The effect of field dimensions on each organ dose was determined. Additional therapy simulations were generated by introducing shielding blocks to protect the kidneys from primary radiation. The gonadal dose was employed to assess the risk of heritable effects for irradiated male patients of reproductive potential. The lifetime attributable risks (LAR) of radiotherapy-induced cancer were estimated using gender- and organ-specific risk coefficients for patient ages of 20, 30, 40, and 50 years old. The risk values were compared with the respective nominal risks. Results: Para-aortic irradiation to 20 Gy resulted in out-of-field organ doses of 5.0538.6 mGy. Blocked field treatment led to a dose change up to 28%. The mean organ dose variation by increasing or decreasing the applied field dimensions was 18.7% 3.9% and 20.8% 4.5%, respectively. The out-of-field photon doses increased the lifetime intrinsic risk of developing thyroid, lung, bladder, prostate, and esophageal cancer by (0.11.4)%, (0.41.1)%, (2.55.4)%, (0.20.4)%, and (6.49.2)%, respectively, depending upon the patient age at exposure and the field size employed. A low risk for heritable effects of less than 0.029% was found compared with the natural incidence of these defects. Conclusions: Testicular cancer survivors are subjected to an increased risk for the induction of bladder and esophageal cancer following para-aortic radiotherapy. The probability for the appearance of any other malignant disease to out-of-field organs was slightly elevated in respect to the nominal cancer incidence rates.

  11. Communication: Quantum molecular dynamics simulation of liquid para-hydrogen by nuclear and electron wave packet approach

    SciTech Connect (OSTI)

    Hyeon-Deuk, Kim; Japan Science and Technology Agency, PRESTO, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 ; Ando, Koji

    2014-05-07

    Liquid para-hydrogen (p-H{sub 2}) is a typical quantum liquid which exhibits strong nuclear quantum effects (NQEs) and thus anomalous static and dynamic properties. We propose a real-time simulation method of wave packet (WP) molecular dynamics (MD) based on non-empirical intra- and inter-molecular interactions of non-spherical hydrogen molecules, and apply it to condensed-phase p-H{sub 2}. The NQEs, such as WP delocalization and zero-point energy, are taken into account without perturbative expansion of prepared model potential functions but with explicit interactions between nuclear and electron WPs. The developed MD simulation for 100 ps with 1200 hydrogen molecules is realized at feasible computational cost, by which basic experimental properties of p-H{sub 2} liquid such as radial distribution functions, self-diffusion coefficients, and shear viscosities are all well reproduced.

  12. PROGRAMA DE IGUALDAD DE ACCESO PARA PUERTO RICO: Recursos de Información del VIH/SIDA de la National Library of Medicine

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Para buscar una publicación, use Journals Database (una base de datos de publicaciones)--y le permitirá buscar por el tema, título/abreviación de la publicación, el número ISSN, o buscar usando términos del tema  Para formar una estrategia con términos de MeSH, use la base de datos MeSH Database- -el vocabulario Medical Subject Heading (MeSH) es controlado por la NLM y proporciona una forma consistente de recuperar información que por lo contrario pueden tener diferentes términos

  13. Refinement of the experimental dynamic structure factor for liquid para-hydrogen and ortho-deuterium using semi-classical quantum simulation

    SciTech Connect (OSTI)

    Smith, Kyle K. G. Rossky, Peter J.; Poulsen, Jens Aage; Cunsolo, A.

    2014-01-21

    The dynamic structure factor of liquid para-hydrogen and ortho-deuterium in corresponding thermodynamic states (T = 20.0?K, n = 21.24?nm{sup ?3}) and (T = 23.0?K, n = 24.61?nm{sup ?3}), respectively, has been computed by both the Feynman-Kleinert linearized path-integral (FK-LPI) and Ring-Polymer Molecular Dynamics (RPMD) methods and compared with Inelastic X Ray Scattering spectra. The combined use of computational and experimental methods enabled us to reduce experimental uncertainties in the determination of the true sample spectrum. Furthermore, the refined experimental spectrum of para-hydrogen and ortho-deuterium is consistently reproduced by both FK-LPI and RPMD results at momentum transfers lower than 12.8?nm{sup ?1}. At larger momentum transfers the FK-LPI results agree with experiment much better for ortho-deuterium than for para-hydrogen. More specifically we found that for k ? 20.0 nm{sup ?1} para-hydrogen provides a test case for improved approximations to quantum dynamics.

  14. Application of a New Ensemble Conserving Quantum Dynamics Simulation Algorithm to Liquid para-Hydrogen and ortho-Deuterium

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Smith, Kyle K.G.; Poulsen, Jens Aage; Nyman, Gunnar; Cunsolo, Alessandro; Rossky, Peter J.

    2015-06-30

    Here, we apply the Feynman-Kleinert Quasi-Classical Wigner (FK-QCW) method developed in our previous work [Smith et al., J. Chem. Phys. 142, 244112 (2015)] for the determination of the dynamic structure factor of liquid para-hydrogen and ortho-deuterium at state points of (T = 20.0 K, n = 21.24 nm-3) and (T = 23.0 K, n = 24.61 nm-3), respectively. When applied to this challenging system, it is shown that this new FK-QCW method consistently reproduces the experimental dynamic structure factor reported by Smith et al. [J. Chem. Phys. 140, 034501 (2014)] for all momentum transfers considered. Moreover, this shows that FK-QCWmore » provides a substantial improvement over the Feynman-Kleinert linearized path-integral method, in which purely classical dynamics are used. Furthermore, for small momentum transfers, it is shown that FK-QCW provides nearly the same results as ring-polymer molecular dynamics (RPMD), thus suggesting that FK-QCW provides a potentially more appealing algorithm than RPMD since it is not formally limited to correlation functions involving linear operators.« less

  15. Para-hydrogen and helium cluster size distributions in free jet expansions based on Smoluchowski theory with kernel scaling

    SciTech Connect (OSTI)

    Kornilov, Oleg; Toennies, J. Peter

    2015-02-21

    The size distribution of para-H{sub 2} (pH{sub 2}) clusters produced in free jet expansions at a source temperature of T{sub 0} = 29.5 K and pressures of P{sub 0} = 0.91.96 bars is reported and analyzed according to a cluster growth model based on the Smoluchowski theory with kernel scaling. Good overall agreement is found between the measured and predicted, N{sub k} = A?k{sup a} e{sup ?bk}, shape of the distribution. The fit yields values for A and b for values of a derived from simple collision models. The small remaining deviations between measured abundances and theory imply a (pH{sub 2}){sub k} magic number cluster of k = 13 as has been observed previously by Raman spectroscopy. The predicted linear dependence of b{sup ?(a+1)} on source gas pressure was verified and used to determine the value of the basic effective agglomeration reaction rate constant. A comparison of the corresponding effective growth cross sections ?{sub 11} with results from a similar analysis of He cluster size distributions indicates that the latter are much larger by a factor 6-10. An analysis of the three body recombination rates, the geometric sizes and the fact that the He clusters are liquid independent of their size can explain the larger cross sections found for He.

  16. ParaView

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    when the job executes. Login to the desired system, and submit your job using the batch startup script. For example on Hopper the sequence of command would be: ssh...

  17. Dosimetric Predictors of Duodenal Toxicity After Intensity Modulated Radiation Therapy for Treatment of the Para-aortic Nodes in Gynecologic Cancer

    SciTech Connect (OSTI)

    Verma, Jonathan [Department of Radiation Oncology, University of Miami Miller School of Medicine, Miami, Florida (United States); Sulman, Erik P.; Jhingran, Anuja [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Tucker, Susan L. [Department of Bioinformatics and Computational Biology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Rauch, Gaiane M. [Department of Radiology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Eifel, Patricia J. [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Klopp, Ann H., E-mail: aklopp@mdanderson.org [Department of Radiation Oncology, The University of Texas MD Anderson Cancer Center, Houston, Texas (United States)

    2014-02-01

    Purpose: To determine the incidence of duodenal toxicity in patients receiving intensity modulated radiation therapy (IMRT) for treatment of para-aortic nodes and to identify dosimetric parameters predictive of late duodenal toxicity. Methods and Materials: We identified 105 eligible patients with gynecologic malignancies who were treated with IMRT for gross metastatic disease in the para-aortic nodes from January 1, 2005, through December 31, 2009. Patients were treated to a nodal clinical target volume to 45 to 50.4 Gy with a boost to 60 to 66 Gy. The duodenum was contoured, and dosimetric data were exported for analysis. Duodenal toxicity was scored according to Radiation Therapy Oncology Group criteria. Univariate Cox proportional hazards analysis and recursive partitioning analysis were used to determine associations between dosimetric variables and time to toxicity and to identify the optimal threshold that separated patients according to risk of toxicity. Results: Nine of the 105 patients experienced grade 2 to grade 5 duodenal toxicity, confirmed by endoscopy in all cases. The 3-year actuarial rate of any duodenal toxicity was 11.7%. A larger volume of the duodenum receiving 55 Gy (V55) was associated with higher rates of duodenal toxicity. The 3-year actuarial rates of duodenal toxicity with V55 above and below 15 cm{sup 3} were 48.6% and 7.4%, respectively (P<.01). In Cox univariate analysis of dosimetric variables, V55 was associated with duodenal toxicity (P=.029). In recursive partitioning analysis, V55 less than 13.94% segregated all patients with duodenal toxicity. Conclusions: Dose-escalated IMRT can safely and effectively treat para-aortic nodal disease in gynecologic malignancies, provided that care is taken to limit the dose to the duodenum to reduce the risk of late duodenal toxicity. Limiting V55 to below 15 cm{sup 3} may reduce the risk of duodenal complications. In cases where the treatment cannot be delivered within these constraints, consideration should be given to other treatment approaches such as resection or initial chemotherapy.

  18. Infrared identification of the {sigma}-complex of Cl-C{sub 6}H{sub 6} in the reaction of chlorine atom and benzene in solid para-hydrogen

    SciTech Connect (OSTI)

    Bahou, Mohammed; Witek, Henryk; Lee, Yuan-Pern

    2013-02-21

    The reaction of a chlorine atom with benzene (C{sub 6}H{sub 6}) is important in organic chemistry, especially in site-selective chlorination reactions, but its product has been a subject of debate for five decades. Previous experimental and theoretical studies provide no concrete conclusion on whether the product is a {pi}- or {sigma}-form of the Cl-C{sub 6}H{sub 6} complex. We took advantage of the diminished cage effect of para-hydrogen (p-H{sub 2}) to produce Cl in situ to react with C{sub 6}H{sub 6} (or C{sub 6}D{sub 6}) upon photolysis of a Cl{sub 2}/C{sub 6}H{sub 6} (or C{sub 6}D{sub 6})/p-H{sub 2} matrix at 3.2 K. The infrared spectrum, showing intense lines at 1430.5, 833.6, 719.8, 617.0, and 577.4 cm{sup -1}, and several weaker ones for Cl-C{sub 6}H{sub 6}, and the deuterium shifts of observed new lines unambiguously indicate that the product is a 6-chlorocyclohexadienyl radical, i.e., the {sigma}-complex of Cl-C{sub 6}H{sub 6}. Observation of the {sigma}-complex rather than the {pi}-complex indicates that the {sigma}-complex is more stable in solid p-H{sub 2} at 3.2 K. The spectral information is crucial for further investigations of the Cl + C{sub 6}H{sub 6} reaction either in the gaseous or solution phase.

  19. Infrared absorption of trans-1-chloromethylallyl and trans-1-methylallyl radicals produced in photochemical reactions of trans-1,3-butadiene and C Script-Small-L {sub 2} in solid para-hydrogen

    SciTech Connect (OSTI)

    Bahou, Mohammed; Wu, Jen-Yu; Tanaka, Keiichi; Lee, Yuan-Pern

    2012-08-28

    The reactions of chlorine and hydrogen atoms with trans-1,3-butadiene in solid para-hydrogen (p-H{sub 2}) were investigated with infrared (IR) absorption spectra. When a p-H{sub 2} matrix containing C Script-Small-L {sub 2} and trans-1,3-butadiene was irradiated with ultraviolet light at 365 nm, intense lines at 650.3, 809.0, 962.2, 1240.6 cm{sup -1}, and several weaker ones due to the trans-1-chloromethylallyl radical, Bullet (CH{sub 2}CHCH)CH{sub 2}C Script-Small-L , appeared. Observed wavenumbers and relative intensities agree with the anharmonic vibrational wavenumbers and IR intensities predicted with the B3PW91/6-311++g(2d, 2p) method. That the C Script-Small-L atom adds primarily to the terminal carbon atom of trans-1,3-butadiene is in agreement with the path of minimum energy predicted theoretically, but in contrast to the reaction of C Script-Small-L + propene in solid p-H{sub 2}[J. Amicangelo and Y.-P. Lee, J. Phys. Chem. Lett. 1, 2956 (2010)] in which the addition of C Script-Small-L to the central C atom is favored, likely through steric effects in a p-H{sub 2} matrix. A second set of lines, intense at 781.6, 957.9, 1433.6, 2968.8, 3023.5, 3107.3 cm{sup -1}, were observed when the UV-irradiated C Script-Small-L {sub 2}/trans-1,3-butadiene/p-H{sub 2} matrix was further irradiated with IR light from a SiC source. These lines are assigned to the trans-1-methylallyl radical, Bullet (CH{sub 2}CHCH)CH{sub 3}, produced from reaction of 1,3-butadiene with a H atom resulted from the reaction of C Script-Small-L atoms with solid p-H{sub 2} exposed to IR radiation.

  20. Sistemas Eolicos Pequenos para Generacion de Electricidad: Una guia para consumidores en Nuevo Mexico

    SciTech Connect (OSTI)

    Not Available

    2007-09-01

    This Spanish version of the popular Small Wind Electric Systems: A New Mexico Consumer's Guide provides consumers with information to help them determine whether a small wind electric system can provide all or a portion of the energy they need for their home or business based on their wind resource, energy needs, and economics. Topics include how to make a home more energy efficient, how to choose the correct turbine size, the parts of a wind electric system, how to determine whether enough wind resource exists, how to choose the best site for a turbine, how to connect a system to the utility grid, and whether it's possible to become independent of the utility grid using wind energy. In addition, the cover of the guide contains a list of contacts for more information.

  1. Sistemas Eolicos Pequenos para Generacion de Electricidad; Una guia para consumidores en los EE.UU.

    SciTech Connect (OSTI)

    Not Available

    2007-09-01

    This Spanish version of the popular Small Wind Electric Systems: A U.S. Consumer's Guide provides consumers with information to help them determine whether a small wind electric system can provide all or a portion of the energy they need for their home or business based on their wind resource, energy needs, and economics. Topics include how to make a home more energy efficient, how to choose the correct turbine size, the parts of a wind electric system, how to determine whether enough wind resource exists, how to choose the best site for a turbine, how to connect a system to the utility grid, and whether it's possible to become independent of the utility grid using wind energy. In addition, the cover of the guide contains a list of contacts for more information.

  2. Sistemas Elicos Pequeos para Generacin de Electricidad: Una guia para consumidores en Nuevo Mxico

    SciTech Connect (OSTI)

    Not Available

    2005-10-01

    This Spanish version of the popular Small Wind Electric Systems: A New Mexico Consumer's Guide provides consumers with information to help them determine whether a small wind electric system can provide all or a portion of the energy they need for their home or business based on their wind resource, energy needs, and economics. Topics include how to make a home more energy efficient, how to choose the correct turbine size, the parts of a wind electric system, how to determine whether enough wind resource exists, how to choose the best site for a turbine, how to connect a system to the utility grid, and whether it's possible to become independent of the utility grid using wind energy. In addition, the cover of the guide contains a list of contacts for more information.

  3. Apoyando La Energia Sostenible Para Todos (Spanish Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2012-06-01

    The Clean Energy Solutions Center, an initiative of the Clean Energy Ministerial and UN-Energy, helps governments design and adopt policies and programs that support the deployment of transformational low-carbon technologies. The Solutions Center serves as a first-stop clearinghouse of clean energy policy reports, data, and tools and provides expert assistance and peer-to-peer learning forums. This factsheet highlights key Solutions Center offerings, including 'ask an expert' assistance on clean energy policy matters, training and peer learning, and technical resources for policy makers worldwide.

  4. ParaView on Tukey | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    to a running pvserver, you need to know the host (and port) where the server is listening. This will be the head node of the job. There are several ways to do this, but...

  5. Modelos para evaluar y dimensionar proyectos de ERNC | Open Energy...

    Open Energy Info (EERE)

    consiguiente ahorro que trae la instalacin de un sistema fotovoltaico conectado a la red. El software realiza simulaciones horarias de generacin de electricidad que permiten...

  6. Introduccion de nuevos servicios para el Publico Portuguese e

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Cray's Cascade Program John Levesque CTO Office Director - Cray Supercomputing Center of Excellence Preliminary Information Copyright 2006 Cray Inc. 3 High Productivity Computing Systems Goals:  Provide a new generation of economically viable high productivity computing systems for the national security and industrial user community (2007 - 2010) Impact:  Performance (efficiency): critical national security applications by a factor of 10X to 40X  Productivity (time-to-solution) 

  7. Ultrascale visualization capabilities for the ParaView/VTK framework

    Energy Science and Technology Software Center (OSTI)

    2009-06-09

    The software is a set of technologies developed by the SciDAC Institute for Ultrascale Visualization in order to address the visualization needs for petascale computing and beyond. These technologies include improved I/O performance, simulation co-processing, advanced rendering capabilities, and specialized visualization techniques developed for SciDAC applications.

  8. ~tx410.ptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    THURSDAY, APRIL 2, 2009 The meeting convened at 9:00 a.m. in Room 8E-089 of the James Forrestal Building, 1000 Independence Avenue, SW, Washington, D.C., Ed Blair, Chair, presiding. COMMITTEE MEMBERS PRESENT: EDWARD BLAIR, Chair STEVE BROWN MICHAEL COHEN BARBARA FORSYTH WALTER HILL VINCENT IANNACCHIONE NANCY KIRKENDALL EDWARD KOKKELENBERG ISRAEL MELENDEZ MICHAEL TOMAN JOHN WEYANT (202) 234-4433 Neal R. Gross & Co., Inc. Page 2 EIA STAFF PRESENT: STEPHANIE BROWN, Designated Federal Official,

  9. Measurement of the angular distribution of the electron from W {r_arrow} e = {nu} decay, in p{anti p} at {radical}s = 1.8 TeV, as function of P{sub T}{sup W}; Medida de la distribucion angular del electron de W en e + neutrino en p{anti p} a 1.8 TeV

    SciTech Connect (OSTI)

    Ramos, M.I.M.

    1996-10-07

    The goal of this work was to study the behavior of the angular distribution of the electron form the decay of the W boson in a specific rest-frame of the W, the Collins-Soper frame. This thesis consists of four major divisions, each dealing with closely related themes: (a) Physics Background, (b) Description of the Hardware and General Software Tools, (c) Description of the Analysis and Specific Tools, and (d) Results and Conclusions. Each division is comprised of one or more chapters and each chapter is divided into sections and subsections.

  10. Status of ParaDyn: DYNA3D for parallel computing

    SciTech Connect (OSTI)

    Goudreau, G.L.; Hoover, C.G.; DeGrout, A.J.; Raboin, P.J.

    1996-04-17

    The evolution of DYNA3D from a vector supercomputer code into a parallel code is reviewed. Current status and target applications, especially those of interest to the Department of Defense.

  11. Servicios del Centro de Soluciones Para la Energia Limpia (Fact Sheet)

    SciTech Connect (OSTI)

    Not Available

    2014-05-01

    This is the Spanish translation of the Clean Energy Solutions Center Services fact sheet. The Clean Energy Solutions Center (Solutions Center) helps governments, advisors and analysts create policies and programs that advance the deployment of clean energy technologies. The Solutions Center partners with international organizations to provide online training, expert assistance, and technical resources on clean energy policy.

  12. I D A E Instituto para la Diversificacion y Ahorro de la Energia...

    Open Energy Info (EERE)

    and technical counselling, as well as project financing for technological innovation and or a replicable kind. The Institute also develops an intense international...

  13. Vehicle Technologies Office Merit Review 2014: ParaChoice: Parametric Vehicle Choice Modeling

    Broader source: Energy.gov [DOE]

    Presentation given by Sandia National Laboratories at 2014 DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Office Annual Merit Review and Peer Evaluation Meeting about parametric...

  14. PREPARATIVOS EN MARCHA PARA LA CONFERENCIA SOBRE JUSTICIA AMBIENTAL NACIONAL Y EL PROGRAMA DE CAPACITACIÓN 2014

    Broader source: Energy.gov [DOE]

    La conferencia regresa a D.C. del 26 al 28 de marzo de 2014 con la celebración de los 20 años de justicia ambiental pasados y futuros.

  15. Conocimiento de Energía: Principios Esenciales y Conceptos Fundamentales para la Educación de Energía

    SciTech Connect (OSTI)

    2014-06-01

    This is the Spanish version of our Energy Literacy guidebook. Esta guía presenta conceptos de energía que, cuando se entienden y se aplican, ayudan a individuos y a comunidades a tomar decisiones sobre la energía con conocimiento de causa. No es un currículo sino que ofrece un marco sobre el cual puede basarse un plan de estudios. La guía se dirige a cualquier persona que participe en la educación de energía.

  16. Report on the CEPA activities [Consorcio Educativo para la Proteccion Ambiental/Educational Consortium for Environmental Preservation] [Final report of activities from 1998 to 2002

    SciTech Connect (OSTI)

    Cruz, Miriam

    2003-02-01

    This report compiles the instances of scientific, educational, and institutional cooperation on environmental issues and other activities in which CEPA was engaged during the past five years, and includes several annual reports and meeting summaries. CEPA is a collaborative international consortium that brings together higher education institutions with governmental agencies, research laboratories, and private sector entities. CEPA's mission is to strengthen the technical, professional, and educational environmental infrastructure in the United States and Latin America. The CEPA program includes curriculum development, student exchange, faculty development, and creation of educational materials, joint research, and other cooperative activities. CEPA's goals are accomplished by actively working with Hispanic-serving institutions of higher education in the United States, in collaboration with institutions of higher education in Latin America and other Consortium members to deliver competitive environmental programs.

  17. Employment-generating projects for the energy and minerals sectors of Honduras. Proyectos generadores de empleos para los sectores energetico y minero de Honduras

    SciTech Connect (OSTI)

    Frank, J.A.

    1988-12-01

    A mission to Honduras invited by the Government of Honduras and sponsored by the Organization of American States addressed the generation of employment in various areas of interest to the country. The mission was made up of experts from numerous countries and international agencies. In the energy sector, the mission recommended consolidating the sector under a coordinating body; carrying out projects to promote reforestation, tree farms, and rational forest utilization; encouraging industrial energy conservation; developing alternative energy sources; and promoting rural electrification and expansion of the electrical grid. In the mining sector, the mission supported promotion and technical assistance for small gold-leaching and placer operations, the national mineral inventory, detailed exploration of promising sites, and the development of a mining school. 13 refs., 7 tabs.

  18. Translation--Final Tank Closure and Waste Management Environmental...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    vertederos y cierre limpio, para reducir permanentemente el potencial de riesgo a la salud humana y al medio ambiente en el futuro. Alternativas Preferidas para el Cierre de...

  19. Ayuda:Pginas protegidas | Open Energy Information

    Open Energy Info (EERE)

    sysop pueden dar carcter de protegida a una pgina, o en su defecto, quitar este estado para levantar la restriccin. Existen varias razones para justificar la proteccin...

  20. BID | Open Energy Information

    Open Energy Info (EERE)

    sostenible y respetuosa con el clima. Fundado en 1959, somos la mayor fuente de financiamiento para el desarrollo de Amrica Latina y el Caribe, con un slido compromiso para...

  1. Ahorra energía y dinero con el viento: 5 pasos antes de invertir...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Para determinar si la compra de un sistema elico es una decisin financieramente inteligente para ti, t o tu asesor financiero debe realizar un anlisis a fondo de las ...

  2. Purpose

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    ... 6. Cuando termines el experimento, limpia el imn con una toalla de papel y tira ... papel entre ellas para observar la conversin de energa mecnica a energa trmica. ...

  3. La energia geotermica en la actualidad: Geothermal Today (Spanish version - 2003)

    SciTech Connect (OSTI)

    2003-09-01

    Por encargo del Secretario Abraham, la Oficina de Eficiencia Energética y Energía Renovable suministra el liderazgo a nivel nacional para impulsar las tecnologías de eficiencia energética y energía renovables, para saltar por encima de las limitaciones del status quo, y para alcanzar beneficios ambientales notables. El Programa de Tecnologías Geotérmicas, parte crítica de nuestro esfuerzo conjunto, está avanzando a grandes zancadas para aumentar la viabilidad y el despliegue de electricidad ...

  4. Vehiculos de combustible flexible: brindando opciones en combustible...

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    actualizada para convertidores de combustible alternativo de la EPA en su sitio web, www.epa.govotaq certdearmfrcisd0602.pdf. El E85 afecta el desempeo del...

  5. Gateway:Amrica Latina/Diseo de polticas y programas | Open...

    Open Energy Info (EERE)

    para garantizar el desarrollo sostenible, teniendo en cuenta la equidad social, crecimiento econmico, la gobernabilidad y compatibilidad con el ambiente, de acuerdo con los...

  6. Evaluacin del impacto | Open Energy Information

    Open Energy Info (EERE)

    sectores de la economa. Puede ser utilizado para las fuentes de emisin de gases de efecto invernadero tanto del sector elctrico como de los otros sectores. Adems puede...

  7. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    ... Conjugated polymer with rigid donor poly(para-divinylphenylamino) backbone and pendant cyanoacetic acid acceptor for dye sensitized solar cells Fang, Zhen ; Wu, Danlu ; Keinan, ...

  8. ACM Biotech | Open Energy Information

    Open Energy Info (EERE)

    Biotech Jump to: navigation, search Name: ACM Biotech Place: Bavaria, Germany Product: German company developing palm oill plantations in Para, Brazil. References: ACM Biotech1...

  9. ORISE Resources: Puerto Rico Equal Access Program

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Puerto Rico Equal Access Program: Programa de Igualdad de Acceso para Puerto Rico: Recursos de Informacin del VIHSIDA de la Biblioteca Nacional de Medicina Workbook The Oak...

  10. mira_bootcamp_May2014_vis_slides.pptx

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    across processes, read in parallel 23 Movie Making VisItParaView: save animation can save animation file can save individual images I tend to do...

  11. Energa Elica | Open Energy Information

    Open Energy Info (EERE)

    Elica Jump to: navigation, search Energa Elica en Latinoamrica Este mapa muestra la capacidad instalada en MW, para cada pas de Latinomerica. La informacin fue...

  12. Untitled Document

    Open Energy Info (EERE)

    comunidade cientfica e empregado na produo de mapas de irradiao solar para a Europa (Beyer et al., 1996; Cano et al., 1986). No presente documento so apresentados...

  13. Antonio Ruette Agroindustrial Ltda | Open Energy Information

    Open Energy Info (EERE)

    Ruette Agroindustrial Ltda Jump to: navigation, search Name: Antonio Ruette Agroindustrial Ltda Place: Para-so, Sao Paulo, Brazil Zip: 15825-000 Product: Sao Paulo-based...

  14. Application Deadline Extended to Jan. 8, 2016: Opportunity from...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... energy agencies in Canada and Mexico, National Resources Canada and Comisin Nacional para el Uso Eficiente de la Energa (National Commission for the Efficient Use of Energy). ...

  15. Biopalma da Amaz nia | Open Energy Information

    Open Energy Info (EERE)

    da Amaznia Place: Belem, Para, Brazil Product: Brazilian palm oil plantation for food industry developer company. Coordinates: -1.454426, -48.502537 Show Map Loading...

  16. Ayuda:Registro de Cambios | Open Energy Information

    Open Energy Info (EERE)

    la edicin. Vista Mejorada Si se encuentra conectado al sitio y se tiene habilitado Javascript, se podr probar la vista "mejorada". Para acceder a esto simplemente dirjase a...

  17. Biotins Energia | Open Energy Information

    Open Energy Info (EERE)

    Biotins Energia Jump to: navigation, search Name: Biotins Energia Place: Para-so do Tocantins, Tocantins, Brazil Zip: 77600-000 Product: Brazil based biodiesel producer, with...

  18. Centro de Energas Renovables (CER) | Open Energy Information

    Open Energy Info (EERE)

    para invertir en energas renovables En septiembre Ernst &38; Young lanz el Renewable energy country attractiveness index - 2015, que posiciona a Chile en el nmero...

  19. X-rays Illuminate Ancient Archimedes Text

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    read28466 Rayos X para Arqumedes, Helena Cebrian, El Pais http:www.elpais.esarticulosociedadRayosXArquimedeselpporsoc20060730elpepisoc8Tes LOCALNATIONAL PRESS:...

  20. Category:En Espaol | Open Energy Information

    Open Energy Info (EERE)

    de recursos ERNC A cont. Gateway:Amrica LatinaModelos para desarrollar proyectos de ERNC Gateway:Amrica LatinaPotencial de recursos energticos renovables...

  1. CSE Solar Energy | Open Energy Information

    Open Energy Info (EERE)

    CSE Solar Energy Jump to: navigation, search Logo: CSE Solar Energy Name: CSE Solar Energy Abbreviation: CSE Solar Energy Address: rua belem do para Place: Campinas, So Paulo...

  2. Ayuda:Subpginas | Open Energy Information

    Open Energy Info (EERE)

    organizar pginas por medio de categoras, elemento mucho ms adecuado para crear una red jerrquica de informacin. Vase tambin Meta:Help:LinkSubpage feature...

  3. Gateway:Amrica Latina/Financiamiento | Open Energy Information

    Open Energy Info (EERE)

    sitio web provee publicaciones, una base de datos gratis de prestamistas en lnea, una red de alianza para intercambio de buenas prcticas y recursos compartidos, entrenamiento...

  4. Potential Impacts of Hydrokinetic and Wave Energy Conversion...

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    ... Estados Unidos de Amrica organiz un taller de trabajo para (1) identificar los dife- ... Nosotros revisamos los resultados del taller de trabajo, enfocndonos en los impactos ...

  5. Communication: Quantum molecular dynamics simulation of liquid...

    Office of Scientific and Technical Information (OSTI)

    Communication: Quantum molecular dynamics simulation of liquid para-hydrogen by nuclear and electron wave packet approach Citation Details In-Document Search Title: Communication:...

  6. Albany, OR * Anchorage, AK * Morgantown, WV * Pittsburgh, PA...

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    quantifiable and relevant para- meters, while leaving the sample available for further testing. Facilities Medical CT Scanner Core-scale Characterization and Fluid Flow The...

  7. Search for: All records | SciTech Connect

    Office of Scientific and Technical Information (OSTI)

    J. January 2014 , Piscataway, NJ: Institute of Electrical and Electronics Engineers (IEEE) ParaDiS-FEM dislocation dynamics simulation code primer Tang, M ; Hommes, G ; Aubry, S ...

  8. Ayuda:Eliminar una pgina | Open Energy Information

    Open Energy Info (EERE)

    La pgina est obsoleta. En este caso se requiere reescribir las oraciones en tiempo pasado para convertir la pgina en un registro de historial. Otra opcin es...

  9. Slide 1

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    chemicals and transportation fuels from lignocellulosic biomass. DMF has a high octane number and is the precursor to green para-xylene. CTH enables selective...

  10. Biocombustibles

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    a Folleto para colorear y de actividades 1 ¿Qué es bioenergía y de dónde proviene? ? Bioenergía es un tipo de energía renovable que se deriva de la biomasa para generar calor, electricidad, productos renovables y combustibles líquidos para el transporte. 2 Biocombustibles provienen de la biomasa (plantas-árboles) y desechos Pacas Rastrojo de maíz Pastos altos Trocitos de madera D E SEC H O S Algas 2 3 BIOMASA Combustible Etanol Biodiésel Combustible de aviones Diésel Gasolina

  11. One Month, Two Reasons to Celebrate the Hispanic Energy Community | Un Mes,

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Dos Razones Para Celebrar la Comunidad Hispana en Energía | Department of Energy Month, Two Reasons to Celebrate the Hispanic Energy Community | Un Mes, Dos Razones Para Celebrar la Comunidad Hispana en Energía One Month, Two Reasons to Celebrate the Hispanic Energy Community | Un Mes, Dos Razones Para Celebrar la Comunidad Hispana en Energía October 17, 2014 - 1:03pm Addthis Students learn about the components of a computer at a STEM Fair hosted by the Latin American Youth Center Career

  12. The Reaction of bis(1,2,4-tri-t-butylcyclopentadienyl)ceriumbenzyl...

    Office of Scientific and Technical Information (OSTI)

    transition state the para-carbon of the benzene ring is attached to the Cp2Ce fragment ... Country of Publication: United States Language: English Subject: 37; BENZENE; TOLUENE; ...

  13. Ayuda:Categoras | Open Energy Information

    Open Energy Info (EERE)

    modificar el ttulo de la pgina visible en la categora. Crear una categora El proceso de creacin de categoras es el mismo que se utiliza para crear pginas wiki...

  14. Accident Investigations

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-29

    Cancels Para. 1 Thru 5, 6A(1) Thru (10), Both 6F (1) Thru (8) and the second misnumbered 6F, and chaps. I and II of DOE 5484.1.

  15. Job Safety and Health Poster Spanish | Department of Energy

    Office of Environmental Management (EM)

    Spanish Departamento de Energa (DOE) de Seguridad en el Trabajo y el cartel de la Salud. Programa DOE Order 440.1B de Proteccin del Trabajador para DOE (Incluyendo la...

  16. STEP Brochure (Spanish)

    Energy Savers [EERE]

    porque un hogar con un mejor nivel de energa vale ms para los compradores; y * SALUD, al ayudar a identificar moho, humedad, prdidas de CO, y problemas de calidad de...

  17. Freedom of Information Act

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    RECEiVED ISY BPA FOLk OFFICE TillS DATE - iia(j DUE DATE: LOG zOf c4f9 F Lsa Este mensaie es para uso exciusivo de su destinatario intencional. Cualquier uso de la...

  18. Tesis LT.PDF

    Open Energy Info (EERE)

    es muy deficiente, pues esta vara mucho por zonas, en dependencia de la nubosidad. Una red de estaciones para caracterizar el rgimen de radiacin solar en todo el pas...

  19. Gateway:Amrica Latina/Aprender ms sobre las ERNC | Open Energy...

    Open Energy Info (EERE)

    search En esta seccin encontrar una seleccin de webcasts disponibles en la red, para aprender ms de cada etapa de la cadena de valor de un proyecto de ERNC. Etapas...

  20. Diapositiva 1

    Open Energy Info (EERE)

    se utilizaron los siguientes parmetros en el mdulo de anlisis geoestadstico de ArcGis: Tamao del lag igual a 9000 metros. Para ello se utiliz la regla emprica de que...

  1. University of Delaware | CCEI Patents

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Patents and Patent Applications Production of Para-xylene by Catalytically Reacting 2,5-Dimethylfuran and Ethylene in a Solvent Dauenhauer, P. J.; Williams, C. L.; Vlachos, D. G.; ...

  2. General Environmental Protection Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1990-06-29

    To establish environmental protection program requirements, authorities, and responsibilities for Department of Energy (DOE) Operations for assuring compliance with applicable Federal, State and local environmental protection laws and regulations, Executive Orders, and internal Department policies. Cancels DOE O 5480.1A. Para. 2b, 4b, and 4c of Chap. II and para. 2d and 3b of Chap. III canceled by DOE O 231.1.

  3. Worker Protection Management for DOE Federal and Contractor Employees

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-30

    Cancels DOE 3790.1B, Except VIII; attach. 2, para. 2C, 2D(2)-(3), 2E(1)-(8), attach. 3, para. 2C, 2D(2)-(3), 2E(1)-(7), of DOE 5480.4; DOE 5480.7A; DOE 5480.8A; DOE 5480.9A; DOE 5480.10; DOE 5480.16A; DOE 5483.1A

  4. Seguridad Laboral y Salud Cartel Español

    Broader source: Energy.gov [DOE]

    Departamento de Energía (DOE) de Seguridad en el Trabajo y el cartel de la Salud. Programa DOE Order 440.1B de Protección del Trabajador para DOE (Incluyendo la Administración Nacional de Seguridad Nuclear) Los empleados federales y el Título 10, Código de Regulaciones Federales (CFR), parte 851, Programa de Salud de los Trabajadores y la Seguridad, ambas requieren que un cartel de seguridad y salud de los trabajadores sea publicado en un lugar visible para informar a los empleados de sus derechos y responsabilidades. En el pasado, el DOE ha tenido dos de seguridad y salud del trabajador posters separadas: una para los empleados federales compatible con el orden 440.1B y una segunda para los empleados del contratista consistente con 10 CFR 851. Este cartel sirve como un único cartel DOE tanto Federal y el contratista empleados. El cartel incluye secciones sobre empleados y representantes de los trabajadores los derechos, las responsabilidades, y del Departamento de Energía y del Departamento de Energía de los contratistas empleados responsabilidades. También se incluye un espacio para que los funcionarios para identificar la seguridad y la salud representante local y dónde encontrar información acerca de

  5. Ahorre Energía

    Energy Savers [EERE]

    Ahorre Energía energysaver.gov Consejos sobre el ahorro de dinero y energía en el hogar 3 Ahorre dinero y energía el día de hoy Comience a ahorrar con las cosas que puede hacer hoy mismo, y use una estrategia integral para asegurar que sus inversiones sean óptimas para ahorrar dinero y energía. 4 El consumo de energía de su casa Averigue como su casa usa energía y dónde pierde la mayor parte de su energía, para poder elaborar un plan de ahorro a corto y largo plazo. 7 Fugas de aire y

  6. Conocimiento

    Office of Environmental Management (EM)

    Conocimiento de Energía Principios Esenciales y Conceptos Fundamentales para la Educación de Energía Una Estructura para la Enseñanza de Energía para Alumnos de Todas las Edades estudios sin prescripción alguna de cuándo, dónde y cómo debe presentarse el contenido. El uso previsto de esta guía incluye, pero no se limita a, la educación formal o informal en materia de energía, al desarrollo de normas de educación, al diseño del plan de estudios, al desarrollo de evaluación de

  7. MarmotViz User Guide

    SciTech Connect (OSTI)

    Alexander S. Rattner; Donna Post Guillen; Srinivas Garimella; Alark Joshi

    2012-08-01

    MarmotViz is an illustrative visualization plug-in for ParaView. It is intended for generating enhanced visualizations of time-varying datasets on unstructured connected meshes. A detailed description of the implemented algorithms and program structure can be found in the related document: Generalized framework and algorithms for illustrative visualization of time-varying data on unstructured meshes . This document provides details for compiling/building MarmotViz, using the MarmotViz plug-in in ParaView, and extending the MarmotViz plug-in.

  8. Classification of generalized quantum statistics associated with the exceptional Lie (super)algebras

    SciTech Connect (OSTI)

    Stoilova, N. I.; Jeugt, J. van der

    2007-04-15

    Generalized quantum statistics (GQS) associated with a Lie algebra or Lie superalgebra extends the notion of para-Bose or para-Fermi statistics. Such GQS have been classified for all classical simple Lie algebras and basic classical Lie superalgebras. In the current paper we finalize this classification for all exceptional Lie algebras and superalgebras. Since the definition of GQS is closely related to a certain Z grading of the Lie (super)algebra G, our classification reproduces some known Z gradings of exceptional Lie algebras. For exceptional Lie superalgebras such a classification of Z gradings has not been given before.

  9. Conocimiento de Energia | Department of Energy

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    Conocimiento de Energia Conocimiento de Energia Conocimiento de Energia Conocimiento de Energía: Principios Esenciales y Conceptos Fundamentales para la Educación de Energía presenta conceptos de energía que, cuando se entienden y se aplican, ayudan a individuos y a comunidades a tomar decisiones sobre la energía con conocimiento de causa. Descargue una copia gratis de Conocimiento de Energía (en la parte inferior de esta página) o escríbanos a energyliteracy@ee.doe.gov para obtener

  10. Plug-In Electric Vehicle Handbook for Consumers (Spanish Version) (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Manual del vehículo eléctrico enchufable para consumidores Manual del vehículo eléctrico enchufable para consumidores 2 Aviso legal Este informe fue preparado en el marco de un trabajo patrocinado por una agencia del gobierno de los Estados Unidos. Ni el gobierno de los Estados Unidos ni ninguna de sus agencias, ni ninguno de sus empleados, otorgan ninguna garantía, ya sea expresa o implícita, ni asumen ninguna obligación ni responsabilidad legal por la exactitud, integridad o utilidad de

  11. Occupational Safety and Health Program for DOE Contractor Employees at Government-Owned Contractor-Operated Facilities

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1983-06-22

    Cancels DOE O 5483.1. Canceled by DOE O 440.1 of 9-30-1995 and by DOE N 251.4 & para. 2a, 2b, 2c of Chapter III canceled by DOE O 231.1.

  12. Environmental Compliance Issue Coordination

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1993-01-07

    To establish the Department of Energy (DOE) requirements for coordination of significant environmental compliance issues to ensure timely development and consistent application of Departmental environmental policy and guidance. Cancels DOE O 5400.2. Para. 5a(2) and 5a(7) canceled by DOE O 231.1.

  13. Metallocene catalyst containing bulky organic group

    DOE Patents [OSTI]

    Marks, Tobin J. (Evanston, IL); Ja, Li (Chicago, IL); Yang, Xinmin (Evanston, IL)

    1996-03-26

    An ionic metallocene catalyst for olefin polymerization which comprises: (1) a cyclopentadienyl-type ligand, a Group IVB transition metal, and alkyl, aryl, or hydride substituents, as a cation, and (2) a weakly coordinating anion comprising boron substituted with halogenated, such as tetra fluoro, aryl substituents preferably containing silylalkyl substitution, such as para-silyl t-butyldimethyl.

  14. Metallocene catalyst containing bulky organic group

    DOE Patents [OSTI]

    Marks, T.J.; Ja, L.; Yang, X.

    1996-03-26

    An ionic metallocene catalyst for olefin polymerization which comprises: (1) a cyclopentadienyl-type ligand, a Group IVB transition metal, and alkyl, aryl, or hydride substituents, as a cation, and (2) a weakly coordinating anion comprising boron substituted with halogenated, such as tetrafluoro-aryl substituents preferably containing silylalkyl substitution, such as para-silyl t-butyldimethyl.

  15. Safety Requirements for the Packaging and Transportation of Hazardous Materials, Hazardous Substances, and Hazardous Wastes

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1985-07-09

    Cancels Chapter 3 of DOE 5480.1A. Canceled by DOE O 460.1 of 9-27-1995 and by DOE N 251.4 & Para. 9c canceled by DOE O 231.1 of 9-30-1995.

  16. Information Security Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1995-09-28

    Establishes an Information Security Program for the protection and control of classified and sensitive information. Cancels DOE 5630.8A, DOE 5639.1, DOE 5639.5, DOE 5639.6A, DOE 5639.7, DOE M 5632.1C-1, Chapter III, Para. 1, 2, and 4-9

  17. Paradyn a parallel nonlinear, explicit, three-dimensional finite-element code for solid and structural mechanics user manual

    SciTech Connect (OSTI)

    Hoover, C G; DeGroot, A J; Sherwood, R J

    2000-06-01

    ParaDyn is a parallel version of the DYNA3D computer program, a three-dimensional explicit finite-element program for analyzing the dynamic response of solids and structures. The ParaDyn program has been used as a production tool for over three years for analyzing problems which range in size from a few tens of thousands of elements to between one-million and ten-million elements. ParaDyn runs on parallel computers provided by the Department of Energy Accelerated Strategic Computing Initiative (ASCI) and the Department of Defense High Performance Computing and Modernization Program. Preprocessing and post-processing software utilities and tools are designed to facilitate the generation of partitioned domains for processors on a massively parallel computer and the visualization of both resultant data and boundary data generated in a parallel simulation. This manual provides a brief overview of the parallel implementation; describes techniques for running the ParaDyn program, tools and utilities; and provides examples of parallel simulations.

  18. Development of quality control procedures for mass produced and released Bactrocera Philippinensis (Diptera: Tephritidae) for sterile insect technique programs

    SciTech Connect (OSTI)

    Resilva, S.; Obra, G.; Zamora, N.; Gaitan, E.

    2007-03-15

    Quality control procedures for Bactrocera philippinensis Drew and Hancock 1994 (Diptera: Tephritidae) used in sterile insect technique (SIT) programs were established in the mass rearing facility at the Philippine Nuclear Research Institute. Basic studies on pupal irradiation, holding/packaging systems, shipping procedures, longevity, sterility studies, and pupal eye color determination in relation to physiological development at different temperature regimes were investigated. These studies will provide baseline data for the development of quality control protocols for an expansion of B. philippinensis field programs with an SIT component in the future. (author) [Spanish] Los procedimientos de control de calidad para Bactrocera philippinensis Drew y Hancock 1994 (Diptera: Tephritidae) usados en programas de la tecnica de insecto esteril (TIE) fueron establecidos en la facilidad de cria en masa del Instituto Filipino de Investigacion Nuclear. Estudios basicos sobre la irradiacion de las pupas, sistemas de almacenaje/empaque, procedimientos del envio, longevidad, estudios de esterilidad y la determinacion del color de ojo de la pupa en relacion con el desarrollo fisiologico en regimenes diferentes de temperatura fueron investigados. Estos estudios proveeran una linea de informacion basica para el desarrollo de protocolos de control de calidad para una expansion de los programas de campo para B. philippinensis con un componente de TIS en el futuro. (author)

  19. Parallel Dislocation Simulator

    Energy Science and Technology Software Center (OSTI)

    2006-10-30

    ParaDiS is software capable of simulating the motion, evolution, and interaction of dislocation networks in single crystals using massively parallel computer architectures. The software is capable of outputting the stress-strain response of a single crystal whose plastic deformation is controlled by the dislocation processes.

  20. Operational characteristics of the J-PARC cryogenic hydrogen system for a spallation neutron source

    SciTech Connect (OSTI)

    Tatsumoto, Hideki; Ohtsu, Kiichi; Aso, Tomokazu; Kawakami, Yoshihiko; Teshigawara, Makoto

    2014-01-29

    The J-PARC cryogenic hydrogen system provides supercritical hydrogen with the para-hydrogen concentration of more than 99 % and the temperature of less than 20 K to three moderators so as to provide cold pulsed neutron beams of a higher neutronic performance. Furthermore, the temperature fluctuation of the feed hydrogen stream is required to be within 0.25 K. A stable 300-kW proton beam operation has been carried out since November 2012. The para-hydrogen concentrations were measured during the cool-down process. It is confirmed that para-hydrogen always exists in the equilibrium concentration because of the installation of an ortho-para hydrogen convertor. Propagation characteristics of temperature fluctuation were measured by temporarily changing the heater power under off-beam condition to clarify the effects of a heater control for thermal compensation on the feed temperature fluctuation. The experimental data gave an allowable temperature fluctuation of 1.05 K. It is clarified through a 286-kW and a 524-kW proton beam operations that the heater control would be applicable for the 1-MW proton beam operation by extrapolating from the experimental data.

  1. Quality management systems for fruit fly (Diptera: Tephritidae) sterile insect technique

    SciTech Connect (OSTI)

    Caceres, C.; Robinson, A.; Shelly, T.; Hendrichs, J.

    2007-03-15

    The papers presented in this issue are focused on developing and validating procedures to improve the overall quality of sterile fruit flies for use in area-wide integrated pest management (AW-IPM) programs with a sterile insect technique (SIT) component. The group was coordinated and partially funded by the Joint FAO/IAEA Programme of Nuclear Techniques in Food and Agriculture, International Atomic Energy Agency, Vienna, Austria, under a five-year Coordinated Research Project (CRP) on 'Quality Assurance in Mass-Reared and Released Fruit Flies for Use in SIT Programmes'. Participants in the CRP from 16 countries came from both basic and applied fields of expertise to ensure that appropriate and relevant procedures were developed. A variety of studies was undertaken to develop protocols to assess strain compatibility and to improve colonization procedures and strain management. Specific studies addressed issues related to insect nutrition, irradiation protocols, field dispersal and survival, field cage behavior assessments, and enhancement of mating competitiveness. The main objective was to increase the efficiency of operational fruit fly programs using sterile insects and to reduce their cost. Many of the protocols developed or improved during the CRP will be incorporated into the international quality control manual for sterile tephritid fruit flies, standardizing key components of the production, sterilization, shipment, handling, and release of sterile insects. (author) [Spanish] Los articulos presentados en este numero se enfocan en el desarrollo y la validacion de procedimientos para mejorar la calidad total de moscas de las frutas esteriles para su uso en programas de manejo integrado de plagas en donde la tecnica del insecto esteril (TIE) es uno de los componentes clave. El grupo fue coordinado y parcialmente financiado por la Division Conjunta de Tecnicas Nucleares para la Alimentacion y la Agricultura de la FAO/OIEA, Viena, Austria, por un periodo de cinco anos bajo el proyecto de Investigacion Coordinada (PIC) sobre 'el Aseguramiento de la Calidad de Moscas de las Frutas Criadas y Liberadas para su Uso en Programas de TIE'. Los participantes en el PIC representan 16 paises con experiencia en campos de investigacion basica y aplicada. Para asegurar que los procedimientos desarrollados fueran apropiados y pertinentes, se realizaron una variedad de estudios para el desarrollo de protocolos para evaluar la compatibilidad y para mejorar los procedimientos de colonizacion y manejo de cepas salvajes. Estudios especificos trataron asuntos relacionados con la nutricion de insectos, los protocolos de irradiacion, la dispersion y supervivencia en el campo, evaluacion del comportamiento en jaulas de campo, y el mejoramiento de la competitividad sexual. Los objetivos fundamentales fueron el aumentar la eficiencia y reducir los costos de los programas operacionales de control de moscas de las frutas donde TIE es utilizada. Muchos de los protocolos desarrollados o mejorados durante el PIC seran incorporados en el Manual Internacional de Control de Calidad para Moscas Estriles de la familia Tephritidae, para estandarizar componentes claves como la produccion, esterilizacion, envio, manejo y liberacion de insectos esteriles. (author)

  2. SDAV Viz July Progress Update: LANL

    SciTech Connect (OSTI)

    Sewell, Christopher Meyer

    2012-07-30

    SDAV Viz July Progress Update: (1) VPIC (Vector Particle in Cell) Kinetic Plasma Simulation Code - (a) Implemented first version of an in-situ adapter based on Paraview CoProcessing Library, (b) Three pipelines: vtkDataSetMapper, vtkContourFilter, vtkPistonContour, (c) Next, resolve issue at boundaries of processor domains; add more advanced viz/analysis pipelines; (2) Halo finding/merger trees - (a) Summer student Wathsala W. from University of Utah is working on data-parallel halo finder algorithm using PISTON, (b) Timo Bremer (LLNL), Valerio Pascucci (Utah), George Zagaris (Kitware), and LANL people are interested in using merger trees for tracking the evolution of halos in cosmo simulations; discussed possible overlap with work by Salman Habib and Katrin Heitmann (Argonne) during their visit to LANL 7/11; (3) PISTON integration in ParaView - Now available from ParaView github.

  3. untitled

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    7 AÇORIANO ORIENTAL QUINTA-FEIRA, 1 DE MARÇO DE 2012 Graciosa é um importante local para estudar a atmosfera A estação para Medição da Radiação At- mosférica que funcionou temporariamen- te nos anos de 2009 e 2010 na ilha Gracio- sa vai voltar, desta feita em definitivo, em meados de 2013, num investimento esti- mado em 14 milhões de dólares, que fará com que os Açores deem um importante contributo parao estudo das alterações cli- máticas. "O departamento de Energia dos

  4. Sumario Laboratorios Nacionales de Sandia/Nuevo Mexico Final Declaracion de Impacto Ambiental de Alcance Amplio (10/1999)

    Energy Savers [EERE]

    Documento Final de la Declaración de Impacto Ambiental de Alcance Amplio de los Laboratorios Nacionales de Sandía/Nuevo México (SWEIS SNL/NM FINAL) (DOE/EIS-2-0281). CONTACTO: Para más información sobre el documento final de la Declaración de Impacto Ambiental de Alcance Amplio (SWEIS), contacte a: Julianne Levings, NEPA Document Manager U.S. DOE, Albuquerque Operations Office P.O. Box 5400, Albuquerque, NM 87185 Teléfono: 1-888-635-7305, Fax: 505-845-6392 Para más información vía

  5. Ahorre Energía | Department of Energy

    Energy Savers [EERE]

    Ahorre Energía Ahorre Energía Consejos sobre cómo ahorrar dinero y energía en su casa En su propia casa, usted tiene el poder para ahorrar dinero y energía. El ahorro de energía reduce la demanda general de recursos del país para producir energía, y el aumento de eficiencia energética es equivalente a agregar otra fuente de energía limpia a nuestra red de electricidad. Esta guía le muestra lo fácil que es reducir el uso de energía en su casa, y también en los caminos. Estas

  6. Nuclear spin conversion of water inside fullerene cages detected by low-temperature nuclear magnetic resonance

    SciTech Connect (OSTI)

    Mamone, Salvatore Concistr, Maria; Carignani, Elisa; Meier, Benno; Krachmalnicoff, Andrea; Johannessen, Ole G.; Denning, Mark; Carravetta, Marina; Whitby, Richard J.; Levitt, Malcolm H.; Lei, Xuegong; Li, Yongjun; Goh, Kelvin; Horsewill, Anthony J.

    2014-05-21

    The water-endofullerene H{sub 2}O@C{sub 60} provides a unique chemical system in which freely rotating water molecules are confined inside homogeneous and symmetrical carbon cages. The spin conversion between the ortho and para species of the endohedral H{sub 2}O was studied in the solid phase by low-temperature nuclear magnetic resonance. The experimental data are consistent with a second-order kinetics, indicating a bimolecular spin conversion process. Numerical simulations suggest the simultaneous presence of a spin diffusion process allowing neighbouring ortho and para molecules to exchange their angular momenta. Cross-polarization experiments found no evidence that the spin conversion of the endohedral H{sub 2}O molecules is catalysed by {sup 13}C nuclei present in the cages.

  7. 102940_EEREcoloringbook_spanish.indd

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    folleto para colorear ENERGÍA HIDRÁULICA ENERGÍA SOLAR TU CASA ENERGÍA GEOTÉRMICA BIOENERGÍA ENERGÍA EÓLICA ¡Forma parte de la nueva generación en energía limpia! ponte en onda Energía limpia puede venir del sol. 2 Energía en el viento puede producir electricidad. Nosotros podemos crear energía con el movimiento del agua. Bioenergía viene de plantas que podemos convertir a combustibles. Leña Trocitos de madera Paja Maíz Pastos Altos Podemos usar energía de la tierra para

  8. Ponte en onda: prende la energía limpia, (Spanish) Get Current

    SciTech Connect (OSTI)

    2015-05-01

    Cambiar a tecnologías de energía limpia significa que fortalecemos la economía y protegemos al medio ambiente. Este libreto de actividades educativas para todas las edades promueve el uso consciente de la energía, con datos de distintas formas de energía aplicables y una variedad de rompecabezas y crucigramas en temas energéticos.

  9. Correlated electron dynamics with time-dependent quantum Monte Carlo:

    Office of Scientific and Technical Information (OSTI)

    Three-dimensional helium (Journal Article) | SciTech Connect Correlated electron dynamics with time-dependent quantum Monte Carlo: Three-dimensional helium Citation Details In-Document Search Title: Correlated electron dynamics with time-dependent quantum Monte Carlo: Three-dimensional helium Here the recently proposed time-dependent quantum Monte Carlo method is applied to three dimensional para- and ortho-helium atoms subjected to an external electromagnetic field with amplitude sufficient

  10. User Data Forum Presentations

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    M01: Perspectives from DOE June 16, 2014 | Author(s): Laura Biven, Ph.D. Senior Science and Technology Advisor, DOE Office of the Deputy Director for Science Programs | Download File: M01-2014JuneNERSCBIVEN.pdf | pdf | 2.6 MB M05: In situ Visualization with the Sierra Simulation Framework Using ParaView Catalyst June 16, 2014 | Author(s): Jeff Mauldin, Thomas Otahal, David Karelitz, Alan Scott, Warren Hunt, Nathan Fabian, Sandia National Laboratories | Download File:

  11. Remote Visualization on Cooley Using VNC | Argonne Leadership Computing

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Facility Changes from Tukey to Cooley Compiling and Linking Using Cobalt on Cooley Visit on Cooley Paraview on Cooley ParaView Tutorial VNC on Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Remote Visualization on Cooley Using VNC When running graphics applications on Cooley, it is best to use the client/server mode, when available, where a lightweight client can run on

  12. Browse by Discipline -- E-print Network Subject Pathways: Engineering --

    Office of Scientific and Technical Information (OSTI)

    Energy, science, and technology for the research community -- hosted by the Office of Scientific and Technical Information, U.S. Department of Energy W X Y Z Van Den Eijnden, Eric (Eric Van Den Eijnden) - Magneto-Fluid Dynamics Division, Courant Institute of Mathematical Sciences, New York University van Milligen, Boudewijn (Boudewijn van Milligen) - Asociación EURATOM-CIEMAT para Fusión Vassiliadis, Dimitrios (Dimitrios Vassiliadis) - Department of Physics, West Virginia University Veža,

  13. National Environmental Policy Act Compliance Program

    Broader source: Directives, Delegations, and Requirements [Office of Management (MA)]

    1992-11-10

    To establish Department of Energy (DOE) responsibilities and procedures to implement the National Environmental Policy Act of 1969 (NEPA) Cancels DOE O 5440.1D. Canceled by DOE O 451.1 of 9-11-1995 and by DOE N 251.4 & Para. 5b(1) and 6a(23) is canceled by DOE O 231.1 of 9-30-1995.

  14. Compiling and Linking | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Changes from Tukey to Cooley Compiling and Linking Using Cobalt on Cooley Visit on Cooley Paraview on Cooley ParaView Tutorial VNC on Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Compiling and Linking Compilers and MPI GNU compilers are installed and are available in your default environment. Intel Composer XE compilers (C/C++ and FORTRAN) are installed in /soft/apps. To use

  15. Cooley | Argonne Leadership Computing Facility

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Changes from Tukey to Cooley Compiling and Linking Using Cobalt on Cooley Visit on Cooley Paraview on Cooley ParaView Tutorial VNC on Cooley Policies Documentation Feedback Please provide feedback to help guide us as we continue to build documentation for our new computing resource. [Feedback Form] Cooley The primary purpose of Cooley is to analyze and visualize data produced on Mira. Equipped with state-of-the-art graphics processing units (GPUs), Cooley converts computational data from Mira

  16. Engineering a monolignol 4-O-methyltransferase with high selectivity for the condensed lignin precursor coniferyl alchohol

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Cai, Yuanheng; Shanklin, John; Mohammad -Wadud Bhuiya; Liu, Chang -Jun

    2015-09-16

    Lignin, a rigid biopolymer in plant cell walls, is derived from the oxidative polymerization of three monolignols. The composition of monolignol monomers dictates the degree of lignin condensation, reactivity, and thus the degradability of plant cell walls. Guaiacyl lignin is regarded as the condensed structural unit. Polymerization of lignin is initiated through the deprotonation of the para-hydroxyl group of monolignols. Therefore, preferentially modifying the para-hydroxyl of a specific monolignol to deprive its dehydrogenation propensity would disturb the formation of particular lignin subunits. Here, we test the hypothesis that specific remodeling the active site of a monolignol 4-O-methyltransferase would create anmore » enzyme that specifically methylates the condensed guaiacyl lignin precursor coniferyl alcohol. Combining crystal structural information with combinatorial active site saturation mutagenesis and starting with the engineered promiscuous enzyme, MOMT5 (T133L/E165I/F175I/F166W/H169F), we incrementally remodeled its substrate binding pocket by the addition of four substitutions, i.e. M26H, S30R, V33S, and T319M, yielding a mutant enzyme capable of discriminately etherifying the para-hydroxyl of coniferyl alcohol even in the presence of excess sinapyl alcohol. The engineered enzyme variant has a substantially reduced substrate binding pocket that imposes a clear steric hindrance thereby excluding bulkier lignin precursors. Lastly, the resulting enzyme variant represents an excellent candidate for modulating lignin composition and/or structure in planta.« less

  17. RVA. 3-D Visualization and Analysis Software to Support Management of Oil and Gas Resources

    SciTech Connect (OSTI)

    Keefer, Donald A.; Shaffer, Eric G.; Storsved, Brynne; Vanmoer, Mark; Angrave, Lawrence; Damico, James R.; Grigsby, Nathan

    2015-12-01

    A free software application, RVA, has been developed as a plugin to the US DOE-funded ParaView visualization package, to provide support in the visualization and analysis of complex reservoirs being managed using multi-fluid EOR techniques. RVA, for Reservoir Visualization and Analysis, was developed as an open-source plugin to the 64 bit Windows version of ParaView 3.14. RVA was developed at the University of Illinois at Urbana-Champaign, with contributions from the Illinois State Geological Survey, Department of Computer Science and National Center for Supercomputing Applications. RVA was designed to utilize and enhance the state-of-the-art visualization capabilities within ParaView, readily allowing joint visualization of geologic framework and reservoir fluid simulation model results. Particular emphasis was placed on enabling visualization and analysis of simulation results highlighting multiple fluid phases, multiple properties for each fluid phase (including flow lines), multiple geologic models and multiple time steps. Additional advanced functionality was provided through the development of custom code to implement data mining capabilities. The built-in functionality of ParaView provides the capacity to process and visualize data sets ranging from small models on local desktop systems to extremely large models created and stored on remote supercomputers. The RVA plugin that we developed and the associated User Manual provide improved functionality through new software tools, and instruction in the use of ParaView-RVA, targeted to petroleum engineers and geologists in industry and research. The RVA web site (http://rva.cs.illinois.edu) provides an overview of functions, and the development web site (https://github.com/shaffer1/RVA) provides ready access to the source code, compiled binaries, user manual, and a suite of demonstration data sets. Key functionality has been included to support a range of reservoirs visualization and analysis needs, including: sophisticated connectivity analysis, cross sections through simulation results between selected wells, simplified volumetric calculations, global vertical exaggeration adjustments, ingestion of UTChem simulation results, ingestion of Isatis geostatistical framework models, interrogation of joint geologic and reservoir modeling results, joint visualization and analysis of well history files, location-targeted visualization, advanced correlation analysis, visualization of flow paths, and creation of static images and animations highlighting targeted reservoir features.

  18. Collaborative Visualization for Large-Scale Accelerator Electromagnetic Modeling (Final Report)

    SciTech Connect (OSTI)

    William J. Schroeder

    2011-11-13

    This report contains the comprehensive summary of the work performed on the SBIR Phase II, Collaborative Visualization for Large-Scale Accelerator Electromagnetic Modeling at Kitware Inc. in collaboration with Stanford Linear Accelerator Center (SLAC). The goal of the work was to develop collaborative visualization tools for large-scale data as illustrated in the figure below. The solutions we proposed address the typical problems faced by geographicallyand organizationally-separated research and engineering teams, who produce large data (either through simulation or experimental measurement) and wish to work together to analyze and understand their data. Because the data is large, we expect that it cannot be easily transported to each team member's work site, and that the visualization server must reside near the data. Further, we also expect that each work site has heterogeneous resources: some with large computing clients, tiled (or large) displays and high bandwidth; others sites as simple as a team member on a laptop computer. Our solution is based on the open-source, widely used ParaView large-data visualization application. We extended this tool to support multiple collaborative clients who may locally visualize data, and then periodically rejoin and synchronize with the group to discuss their findings. Options for managing session control, adding annotation, and defining the visualization pipeline, among others, were incorporated. We also developed and deployed a Web visualization framework based on ParaView that enables the Web browser to act as a participating client in a collaborative session. The ParaView Web Visualization framework leverages various Web technologies including WebGL, JavaScript, Java and Flash to enable interactive 3D visualization over the web using ParaView as the visualization server. We steered the development of this technology by teaming with the SLAC National Accelerator Laboratory. SLAC has a computationally-intensive problem important to the nations scientific progress as described shortly. Further, SLAC researchers routinely generate massive amounts of data, and frequently collaborate with other researchers located around the world. Thus SLAC is an ideal teammate through which to develop, test and deploy this technology. The nature of the datasets generated by simulations performed at SLAC presented unique visualization challenges especially when dealing with higher-order elements that were addressed during this Phase II. During this Phase II, we have developed a strong platform for collaborative visualization based on ParaView. We have developed and deployed a ParaView Web Visualization framework that can be used for effective collaboration over the Web. Collaborating and visualizing over the Web presents the community with unique opportunities for sharing and accessing visualization and HPC resources that hitherto with either inaccessible or difficult to use. The technology we developed in here will alleviate both these issues as it becomes widely deployed and adopted.

  19. UNVEILING SOURCES OF HEATING IN THE VICINITY OF THE ORION BN/KL HOT CORE AS TRACED BY HIGHLY EXCITED INVERSION TRANSITIONS OF AMMONIA

    SciTech Connect (OSTI)

    Goddi, C.; Humphreys, E. M. L.; Greenhill, L. J.; Chandler, C. J.; Matthews, L. D.

    2011-09-20

    Using the Expanded Very Large Array, we have mapped the vicinity of the Orion BN/KL Hot Core with subarcsecond angular resolution in seven metastable inversion transitions of ammonia (NH{sub 3}): (J, K) = (6,6) to (12,12). This emission comes from levels up to 1500 K above the ground state, enabling identification of source(s) responsible for heating the region. We used this multi-transition data set to produce images of the rotational/kinetic temperature (T {sub rot}/T {sub kin}) and the column density N {sub col} of NH{sub 3} for ortho and para species separately and on a position-by-position basis. We find T {sub rot} and N {sub col} in the range 160-490 K and (1-4) x 10{sup 17} cm{sup -2}, respectively. Our spatially resolved images show that the highest (column) density and hottest gas is found in a northeast-southwest elongated ridge to the southeast of Source I. We have also measured the ortho-para ratio of ammonia, estimated to vary in the range 0.9-1.6. Enhancement of ortho with respect to para and the offset of hot NH{sub 3} emission peaks from known (proto)stellar sources provide evidence that the NH{sub 3} molecules have been released from dust grains into the gas phase through the passage of shocks and not by stellar radiation. We propose that the combined effect of Source I's proper motion and its low-velocity outflow impinging on a pre-existing dense medium is responsible for the excitation of NH{sub 3} and the Orion Hot Core. Finally, we found for the first time evidence of a slow ({approx}5 km s{sup -1}) and compact ({approx}1000 AU) outflow toward IRc7.

  20. NORTH AMERICAN ISO 50001/SEP PILOT PROGRAM INFORMATIONAL WEBINAR, NOVEMBER

    Broader source: Energy.gov (indexed) [DOE]

    18, 2:30PM EASTERN TIME | Department of Energy November 18, 2015 2:30PM to 3:30PM EST The U.S. DOE invites applications for a pilot program to help companies implement ISO 50001 and the Superior Energy Performance (SEP) program across multiple facilities throughout North America and worldwide. This pilot program is in partnership with the Commission for Environmental Cooperation (CEC) and the national energy agencies in Canada and Mexico, National Resources Canada and Comisión Nacional para

  1. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  2. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  3. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  4. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  5. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  6. Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Solving the Unsovlable: The Nanostructure of Gold at 1.1 Å Resolution Print For the first time, a team of scientists led by Roger Kornberg has synthesized thiol-covered gold nanoparticles and, using ALS Beamlines 5.0.2 and 8.2.2 and SSRL Beamlines 11-1 and 11-3, conclusively ascertained their atomic structure (at 1.1 Å resolution). The gold-thiol nanoparticle consists of 102 gold atoms surrounded by 44 molecules of a thiol compound (para-mercaptobenzoic acid, or p-MBA). The central gold atoms

  7. Selective posttranslational modification of phage-displayed polypeptides

    DOE Patents [OSTI]

    Tsao, Meng-Lin; Tian, Feng; Schultz, Peter

    2013-11-19

    The invention relates to posttranslational modification of phage-displayed polypeptides. These displayed polypeptides comprise at least one unnatural amino acid, e.g., an aryl-azide amino acid such as p-azido-L-phenylalanine, or an alkynyl-amino acid such as para-propargyloxyphenylalanine, which are incorporated into the phage-displayed fusion polypeptide at a selected position by using an in vivo orthogonal translation system comprising a suitable orthogonal aminoacyl-tRNA synthetase and a suitable orthogonal tRNA species. These unnatural amino acids advantageously provide targets for posttranslational modifications such as azide-alkyne [3+2] cycloaddition reactions and Staudinger modifications.

  8. Selective posttranslational modification of phage-displayed polypeptides

    DOE Patents [OSTI]

    Tsao, Meng-Lin; Tian, Feng; Schultz, Peter

    2013-02-05

    The invention relates to posttranslational modification of phage-displayed polypeptides. These displayed polypeptides comprise at least one unnatural amino acid, e.g., an aryl-azide amino acid such as p-azido-L-phenylalanine, or an alkynyl-amino acid such as para-propargyloxyphenylalanine, which are incorporated into the phage-displayed fusion polypeptide at a selected position by using an in vivo orthogonal translation system comprising a suitable orthogonal aminoacyl-tRNA synthetase and a suitable orthogonal tRNA species. These unnatural amino acids advantageously provide targets for posttranslational modifications such as azide-alkyne [3+2]cycloaddition reactions and Staudinger modifications.

  9. Monolayer-induced band shifts at Si(100) and Si(111) surfaces

    SciTech Connect (OSTI)

    Mkinen, A. J. Kim, Chul-Soo; Kushto, G. P.

    2014-01-27

    We report our study of the interfacial electronic structure of Si(100) and Si(111) surfaces that have been chemically modified with various organic monolayers, including octadecene and two para-substituted benzene derivatives. X-ray photoelectron spectroscopy reveals an upward band shift, associated with the assembly of these organic monolayers on the Si substrates, that does not correlate with either the dipole moment or the electron withdrawing/donating character of the molecular moieties. This suggests that the nature and quality of the self-assembled monolayer and the intrinsic electronic structure of the semiconductor material define the interfacial electronic structure of the functionalized Si(100) and Si(111) surfaces.

  10. Low temperature bainitic ferrite: Evidence of carbon super-saturation and tetragonality

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Garcia-Mateo, C.; Jimenez, J. A.; Yen, Hung-Wei; Miller, Michael K.; Morales-Rivas, L; Kuntz, M; Ringer, S. P.; Yang, Jer-Ren; Caballero, Francesca G.

    2015-03-31

    Experimental evidence indicates that bainitic ferrite formed by transformation at low temperatures (200350 C) includes quantities of carbon in solid solution far beyond those expected from para-equilibrium. A change in the conventional symmetry of the bainitic ferrite lattice from cubic to tetragonal explains the abnormal solid solubility detected. This carbon supersaturation was measured by atom probe tomography, and the tetragonality of the bainitic ferrite, was characterized by means of X-ray diffraction analysis and high resolution transmission electron microscopy.

  11. Degradation of polychlorinated biphenyl mixtures in soil using phanerochaete chrysosporium in nutrient rich, non-ligninolytic conditions

    DOE Patents [OSTI]

    Yadav, Jagjit S.; Reddy, Chilekampalli A.; Quensen, John F.; Tiedje, James M.

    2000-01-01

    Substantial degradation of polychlorinated biphenyl (PCB) mixtures is carried out using the white rot fungus Phanerochaete chrysosporium, under nutrient, carbon and nitrogen source rich, non-ligninolytic conditions. The PCBs with various numbers of ortho, meta, and para chlorines were extensively degraded, indicating relative nonspecificity for the position of chlorine substitutions on the biphenyl ring. Maximal degradation of PCBs in a mixture was observed in malt extract medium (18.4% on a molar basis), in which most of the individual PCBs were degraded.

  12. Direct non-Born-Oppenheimer variational calculations of all bound vibrational states corresponding to the first rotational excitation of D{sub 2} performed with explicitly correlated all-particle Gaussian functions

    SciTech Connect (OSTI)

    Sharkey, Keeper L.; Kirnosov, Nikita; Adamowicz, Ludwik

    2015-05-07

    Direct variational calculations where the Born-Oppenheimer approximation is not assumed are done for all rovibrational states of the D{sub 2} molecule corresponding to first excited rotational level (the N = 1 states). All-particle explicitly correlated Gaussian basis functions are used in the calculations. The exponential parameters of the Gaussians are optimized with the aid of analytically calculated energy gradient determined with respect to these parameters. The results allow to determine the ortho-para spin isomerization energies as a function of the vibrational quantum number.

  13. E-Verify If you have the Right to Work Poster (English)

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    SI USTED TIENE DERECHO A TRABAJAR, no deje que nadie se lo quite. Si tiene derecho a trabajar legalmente en los Estados Unidos, existen leyes para protegerlo contra la discrim- inación en el trabajo. Debe saber que - Ningún patrón puede negarle trabajo, ni puede despedirlo, debido a su país de origen o su condición de inmigrante. En la mayoría de los casos, los patrones no pueden exigir que usted sea ciudadano de los Estados Unidos o residente permanente o negarse a aceptar documentos

  14. E-Verify Participation Poster English Version

    Broader source: All U.S. Department of Energy (DOE) Office Webpages (Extended Search)

    Para mayor información sobre E-Verify, favor ponerse en contacto con la oficina del DHS llamando al: 1-888-464-4218 Este empleador le proporcionará a la Administración del Seguro Social (SSA), y si es necesario, al Departamento de Seguridad Nacional (DHS), información obtenida del Formulario I-9 correspondiente a cada empleado recién contratado con el propósito de confirmar la autorización de trabajo. IMPORTANTE: En dado caso que el gobierno no pueda confirmar si está usted autorizado

  15. Health assessment for Stringfellow, Glen Avon, California, Region 9. CERCLIS No. CAT08001286. Final report

    SciTech Connect (OSTI)

    Not Available

    1989-05-25

    The Stringfellow Hazardous Waste site lies at the head of the Pyrite Canyon in Riverside County less than a mile north of the community of Glen Avon. The principal contaminants of concern in the ground water include trichloroethene (TCE), chloroform, chlorobenzene, dichlorobenzene, nitrate, sodium, sulfate, para-chlorobenzene sulfonic acid (p-CBSA), chromium, and cadmium. The principal environmental pathways for contaminant transport include ground water, surface water, soil, sediment, and air. The Pyrite Canyon portion of the site is of public health concern because of the risk to human health resulting from probable past and present exposure to hazardous substances that may result in adverse human health effects.

  16. Print

    Office of Energy Efficiency and Renewable Energy (EERE) Indexed Site

    maneras fáciles de usar energía en forma inteligente Apaga las luces. Marca la caja. Apaga tu computadora. Usa bombillas de alta eficiencia energética. Desenchufa los cargadores cuando no están en uso. Usa luz natural, calor del sol y ventilación. Usa regletas eléctricas "inteligentes." Conversa con tus padres sobre los termostatos digitales y programables. Conversa con tus padres sobre el mejoramiento del hogar para ahorrar energía (ventanas, puertas y techos).

  17. Studies of thin films and surfaces with optical harmonic generation and electron spectroscopy

    SciTech Connect (OSTI)

    Wilk, D.E.

    1996-01-01

    Optical second harmonic generation (SHG) and sum frequency generation (SFG) were used to study C{sup 60} thin solid films (low energy ED forbidden electronic excitations), and electron spectroscopy was used to study organic overlayers (xylenes) on Pt(111). Theory of SHG from a thin film is described in terms of surface and bulk contributions as well as local and nonlocal contributions to the optical nonlinearities. (1)In situ SHG data on C{sub 60} films during UHV film growth can be described in terms of only nonlocal contributions to both surface and bulk nonlinear susceptibilities. Microscopic origin of SHG response is discussed in terms of electric quadrupole and ED transitions of C{sub 60}. (2)Adsorption and thermal decomposition of ortho- and para-xylene on Pt(111) is studied using HREELS, LEED, AES, and thermal desorption spectroscopy. We have observed preferential decomposition of the methyl groups which leads to distinct decomposition pathways for ortho- and para-xylene on Pt(111).

  18. Computational mechanics

    SciTech Connect (OSTI)

    Goudreau, G.L.

    1993-03-01

    The Computational Mechanics thrust area sponsors research into the underlying solid, structural and fluid mechanics and heat transfer necessary for the development of state-of-the-art general purpose computational software. The scale of computational capability spans office workstations, departmental computer servers, and Cray-class supercomputers. The DYNA, NIKE, and TOPAZ codes have achieved world fame through our broad collaborators program, in addition to their strong support of on-going Lawrence Livermore National Laboratory (LLNL) programs. Several technology transfer initiatives have been based on these established codes, teaming LLNL analysts and researchers with counterparts in industry, extending code capability to specific industrial interests of casting, metalforming, and automobile crash dynamics. The next-generation solid/structural mechanics code, ParaDyn, is targeted toward massively parallel computers, which will extend performance from gigaflop to teraflop power. Our work for FY-92 is described in the following eight articles: (1) Solution Strategies: New Approaches for Strongly Nonlinear Quasistatic Problems Using DYNA3D; (2) Enhanced Enforcement of Mechanical Contact: The Method of Augmented Lagrangians; (3) ParaDyn: New Generation Solid/Structural Mechanics Codes for Massively Parallel Processors; (4) Composite Damage Modeling; (5) HYDRA: A Parallel/Vector Flow Solver for Three-Dimensional, Transient, Incompressible Viscous How; (6) Development and Testing of the TRIM3D Radiation Heat Transfer Code; (7) A Methodology for Calculating the Seismic Response of Critical Structures; and (8) Reinforced Concrete Damage Modeling.

  19. Cis-Chlorobenzene dihydrodiol dehydrogenase (TcbB) from Pseudomonas sp. strain P51, expressed in Escherichia coli DH5{alpha}(pTCB149), catalyzes enantioselective dehydrogenase reactions

    SciTech Connect (OSTI)

    Raschke, H.; Fleischmann, T.; Meer, J.R. van der; Kohler, H.P.E.

    1999-12-01

    cis-Chlorobenzene dihydrodiol dehydrogenase (CDD) from Pseudomonas sp. strain P51, cloned into Escherichia coli DH5{alpha}(pTCB149) was able to oxidize cis-dihydrodihydroxy derivatives (cis-dihydrodiols) of dihydronaphthalene, indene, and four para-substituted toluenes to the corresponding catechols. During the incubation of a nonracemic mixture of cis-1,2-indandiol, only the (+)-cis-(1R,2S) enantiomer was oxidized; the (-)-cis-(S,2R) enantiomer remained unchanged, CDD oxidized both enantiomers of cis-1,2-dihydroxy-1,2,3,4-tetrahydronaphthalene, but oxidation of the (+)-cis-(1S,2R) enantiomer was delayed until the (-)-cis-(1R,2S) enantiomer was completely depleted. When incubated with nonracemic mixtures of para-substituted cis-toluene dihydrodiols, CDD always oxidized the major enantiomer at a higher rate than the minor enantiomer. When incubated with racemic 1-indanol, CDD enantioselectively transformed the (+)-(1S) enatiomer to 1-indanone. This stereoselective transformation shows that CDD also acted as an alcohol dehydrogenase. Additionally, CDD was able to oxidize (+)-cis-(1R,2S)-dihydroxy-1,2-dihydronaphthalene, (+)-cis-monochlorobiphenyl dihydrodiols, and (+)-cis-toluene dihydrodiol to the corresponding catechols.

  20. ThreatView

    Energy Science and Technology Software Center (OSTI)

    2007-09-25

    The ThreatView project is based on our prior work with the existing ParaView open-source scientific visualization application. Where ParaView provides a grapical client optimized scientific visualization over the VTK parallel client server architecture, ThreatView provides a client optimized for more generic visual analytics over the same architecture. Because ThreatView is based on the VTK parallel client-server architecture, data sources can reside on remote hosts, and processing and rendering can be performed in parallel. As seenmore » in Fig. 1, ThreatView provides four main methods for visualizing data: Landscape View, which displays a graph using a landscape metaphor where clusters of graph nodes produce "hills" in the landscape; Graph View, which displays a graph using a traditional "ball-and-stick" style; Table View, which displays tabular data in a standard spreadsheet; and Attribute View, which displays a tabular "histogram" of input data - for a selected table column, the Attribute View displays each unique value within the column, and the number of times that value appears in the data. There are two supplemental view types: Text View, which displays tabular data one-record-at-a-time; and the Statistics View, which displays input metadata, such as the number of vertices and edges in a graph, the number of rows in a table, etc.« less

  1. H{sub 2}AgCl: A spectroscopic study of a dihydrogen complex

    SciTech Connect (OSTI)

    Grubbs, G. S.; Obenchain, Daniel A.; Pickett, Herbert M.; Novick, Stewart E.

    2014-09-21

    H{sub 2}AgCl has been observed on a Fourier transform microwave spectrometer equipped with laser ablation source and determined to be a dihydrogen complex. Transitions up to J = 32 have been measured and analyzed for four isotopologues of the complex containing ortho and para H{sub 2}. The ortho and para spin states have been included in one fit, a deviation from the typical H{sub 2} complex. Rotational constants B and C, centrifugal distortion constants ?{sub J} and ?{sub JK}, nuclear electric quadrupole coupling constants ?{sub aa}, ?{sub bb}, and ?{sub cc} for {sup 35}Cl and {sup 37}Cl have been fit for both spin states while nuclear spin-nuclear spin constants D{sub aa}, D{sub bb}, and D{sub cc}, and nuclear spin-rotation constant C{sub aa} have been reported for the ortho spin state. Quantum chemical calculations predict a strong bonding interaction and the strength of the complex has been related to reported ?{sub aa} and ?{sub J} values amongst a host of comparable species, including the AgCl monomer itself. Bond lengths have been determined for AgCl, AgH{sub 2} center-of-mass, and HH and are reported.

  2. Comparative developmental toxicity of environmentally relevant oxygenated PAHs

    SciTech Connect (OSTI)

    Knecht, Andrea L.; Goodale, Britton C.; Truong, Lisa; Simonich, Michael T.; Swanson, Annika J.; Matzke, Melissa M.; Anderson, Kim A.; Waters, Katrina M.; Tanguay, Robert L.

    2013-09-01

    Oxygenated polycyclic aromatic hydrocarbons (OPAHs) are byproducts of combustion and photo-oxidation of parent PAHs. OPAHs are widely present in the environment and pose an unknown hazard to human health. The developing zebrafish was used to evaluate a structurally diverse set of 38 OPAHs for malformation induction, gene expression changes and mitochondrial function. Zebrafish embryos were exposed from 6 to 120 h post fertilization (hpf) to a dilution series of 38 different OPAHs and evaluated for 22 developmental endpoints. AHR activation was determined via CYP1A immunohistochemistry. Phenanthrenequinone (9,10-PHEQ), 1,9-benz-10-anthrone (BEZO), xanthone (XAN), benz(a)anthracene-7,12-dione (7,12-B[a]AQ), and 9,10-anthraquinone (9,10-ANTQ) were evaluated for transcriptional responses at 48 hpf, prior to the onset of malformations. qRT-PCR was conducted for a number of oxidative stress genes, including the glutathione transferase(gst), glutathione peroxidase(gpx), and superoxide dismutase(sod) families. Bioenergetics was assayed to measure in vivo oxidative stress and mitochondrial function in 26 hpf embryos exposed to OPAHs. Hierarchical clustering of the structure-activity outcomes indicated that the most toxic of the OPAHs contained adjacent diones on 6-carbon moieties or terminal, para-diones on multi-ring structures. 5-carbon moieties with adjacent diones were among the least toxic OPAHs while the toxicity of multi-ring structures with more centralized para-diones varied considerably. 9,10-PHEQ, BEZO, 7,12-B[a]AQ, and XAN exposures increased expression of several oxidative stress related genes and decreased oxygen consumption rate (OCR), a measurement of mitochondrial respiration. Comprehensive in vivo characterization of 38 structurally diverse OPAHs indicated differential AHR dependency and a prominent role for oxidative stress in the toxicity mechanisms. - Highlights: OPAHs are byproducts of combustion present in the environment. OPAHs pose a largely unknown hazard to human health. We assayed the developmental toxicology of 39 different OPAHs in zebrafish. The most toxic OPAHs contained adjacent diones or terminal, para-diones. AHR dependency varied among OPAHs, and oxidative stress influenced their toxicology.

  3. Open-field host specificity test of Gratiana boliviana (Coleoptera: Chrysomelidae), a biological control agent of tropical soda apple (Solanaceae) in the United States

    SciTech Connect (OSTI)

    Gandolfo, D.; McKay, F.; Medal, J.C.; Cuda, J.P.

    2007-03-15

    An open-field experiment was conducted to assess the suitability of the South American leaf feeding beetle Gratiana boliviana Spaeth for biological control of Solanum viarum Dunal in the USA. An open-field test with eggplant, Solanum melongena L., was conducted on the campus of the University of Buenos Aires, Argentina, and a S. viarum control plot was established 40 km from the campus. One hundred adult beetles were released in each plot at the beginning of the experiment during the vegetative stage of the plants, and forty additional beetles were released in the S. melongena plot at the flowering stage. All the plants in each plot were checked twice a week and the number of adults, immatures, and eggs recorded. Results showed almost a complete rejection of eggplant by G. boliviana. No noticeable feeding damage was ever recorded on eggplant. The experiment was ended when the eggplants started to senesce or were severely damaged by whiteflies and spider mites. The results of this open-field experiment corroborate previous quarantine/laboratory host-specificity tests indicating that a host range expansion of G. boliviana to include eggplant is highly unlikely. Gratiana boliviana was approved for field release in May 2003 in the USA. To date, no non-target effects have been observed either on eggplant or native species of Solanum. (author) [Spanish] Una prueba de campo fue conducida para evaluar la especificidad del escarabajo suramericano defoliador Gratiana boliviana Spaeth para control biologico de Solanum viarum Dunal en los Estados Unidos. La prueba con berenjena se realizo en el campo experimental de la Universidad de Buenos Aires, Argentina, y una parcela control con S. viarum fue establecida a 40 km. Cien escarabajos adultos fueron liberados en cada parcela al inicio del experimento durante la fase vegetativa, y cuarenta escarabajos adicionales fueron liberados en la parcela de berenjena durante la floracion. Todas las plantas en cada parcela fueron inspeccionadas dos veces a la semana y el numero de adultos, larvas, y posturas fueron registrados. Resultados indicaron un casi completo rechazo de la berenjena por G. boliviana. Ningun dano visible de defoliacion en la berenjena fue detectado. Las pruebas concluyeron cuando las plantas de berenjena alcazaron su madurez o fueron severamente danadas por mosca blanca y acaros. Resultados corroboran previas pruebas de especificidad en laboratorio/cuarentena que indican que la berenjena no es un hospedero de G. boliviana y que la posibilidad de llegar a ser una plaga de este cultivo es muy remota. Gratiana boliviana fue aprobado para ser liberado en el campo en mayo del 2003. Ningun dano ha sido observado hasta la fecha a plantas no blanco. (author)

  4. Knudsen heat capacity

    SciTech Connect (OSTI)

    Babac, Gulru; Reese, Jason M.

    2014-05-15

    We present a Knudsen heat capacity as a more appropriate and useful fluid property in micro/nanoscale gas systems than the constant pressure heat capacity. At these scales, different fluid processes come to the fore that are not normally observed at the macroscale. For thermodynamic analyses that include these Knudsen processes, using the Knudsen heat capacity can be more effective and physical. We calculate this heat capacity theoretically for non-ideal monatomic and diatomic gases, in particular, helium, nitrogen, and hydrogen. The quantum modification for para and ortho hydrogen is also considered. We numerically model the Knudsen heat capacity using molecular dynamics simulations for the considered gases, and compare these results with the theoretical ones.

  5. Effects of polymethylmethacrylate-transfer residues on the growth of organic semiconductor molecules on chemical vapor deposited graphene

    SciTech Connect (OSTI)

    Kratzer, Markus Teichert, Christian; Bayer, Bernhard C.; Kidambi, Piran R.; Matkovi?, Aleksandar; Gaji?, Rado; Cabrero-Vilatela, Andrea; Weatherup, Robert S.; Hofmann, Stephan

    2015-03-09

    Scalably grown and transferred graphene is a highly promising material for organic electronic applications, but controlled interfacing of graphene thereby remains a key challenge. Here, we study the growth characteristics of the important organic semiconductor molecule para-hexaphenyl (6P) on chemical vapor deposited graphene that has been transferred with polymethylmethacrylate (PMMA) onto oxidized Si wafer supports. A particular focus is on the influence of PMMA residual contamination, which we systematically reduce by H{sub 2} annealing prior to 6P deposition. We find that 6P grows in a flat-lying needle-type morphology, surprisingly independent of the level of PMMA residue and of graphene defects. Wrinkles in the graphene typically act as preferential nucleation centers. Residual PMMA does however limit the length of the resulting 6P needles by restricting molecular diffusion/attachment. We discuss the implications for organic device fabrication, with particular regard to contamination and defect tolerance.

  6. Next generation extractants for separation of cesium from high-level waste

    SciTech Connect (OSTI)

    Bartsch, R.A.; Zhou, H.; Delmau, L.H.; Moyer, B.A.

    2008-07-01

    Using calix[4]arene as a scaffold, lipophilic, proton-ionizable ligands for cesium ion extraction have been synthesized. In the 1,3-alternate conformation, lipophilic octyl groups are attached to distal oxygens on one side of the calix[4]arene molecule, and an alkylated benzo-crown-6 unit is connected to distal oxygens on the other side. One phenyl octyl ether unit bears an acidic group in the para-position which orients it directly over the polyether ring. Solvent extractions of trace cesium ion from aqueous solutions into toluene have been performed. The efficiency of cesium ion extraction as a function of the aqueous phase pH and the identity of the acidic group have been assessed. Promising results are obtained for this new series of cesium ion extractants. (authors)

  7. MarmotViz

    Energy Science and Technology Software Center (OSTI)

    2013-07-09

    MarmotViz is an illustrative visualization plug-in for ParaView. It enables users to identify and track time-varying features in simulation datasets. It permits the application of illustrative visualization effects to these features including: selective visualization, feature coloring, boundary smoothing, haloing, silhouette outlining, speedlines, and strobe silhouettes. These techniques serve to assist in exploration and interpretation of simulation data and can be used to generate enhanced renderings for presentation. The MarmotViz plug-in is developed as a flexiblemore » framework, and can be easily extended to incorporate new region-of-interest (ROI) identification algorithms, feature matching and tracking algorithms, and illustrative visualization effects.« less

  8. A density functional theory study of magneto-electric Jones birefringence of noble gases, furan homologues, and mono-substituted benzenes

    SciTech Connect (OSTI)

    Fahleson, Tobias; Norman, Patrick; Coriani, Sonia; Rizzo, Antonio; Rikken, Geert L. J. A.

    2013-11-21

    We report on the results of a systematic ab initio study of the Jones birefringence of noble gases, of furan homologues, and of monosubstituted benzenes, in the gas phase, with the aim of analyzing the behavior and the trends within a list of systems of varying size and complexity, and of identifying candidates for a combined experimental/theoretical study of the effect. We resort here to analytic linear and nonlinear response functions in the framework of time-dependent density functional theory. A correlation is made between the observable (the Jones constant) and the atomic radius for noble gases, or the permanent electric dipole and a structure/chemical reactivity descriptor as the para Hammett constant for substituted benzenes.

  9. Di-p-xylylene polymer and method for making the same

    DOE Patents [OSTI]

    Jahn, Randy K. (Los Alamos, NM); Liepins, Raimond (Los Alamos, NM)

    1985-01-01

    A method and apparatus for forming an improved poly-p-xylylene film. Solid di-para-xylylene dimer is sublimed in a sublimation furnace at approximately 100.degree. to 200.degree. C. and subsequently conducted to a pyrolysis furnace where it is pyrolyzed to the diradical p-xylylene monomer while in the vapor state at approximately 600 degrees C. The diradical monomer is then introduced into a deposition chamber for deposition onto a suitable substrate. The deposition chamber includes electrodes for producing a low pressure plasma through which the diradical monomer passes prior to deposition. The interaction of the diradical monomer with the low pressure plasma results in the formation of poly-p-xylylene film which is exceptionally hard and thermally stable.

  10. Dislocation Dynamics Simulations of Junctions in Hexagonal Close-Packed Crystals

    SciTech Connect (OSTI)

    Wu, C; Aubry, S; Chung, P; Arsenlis, A

    2011-12-05

    The formation and strength of dislocations in the hexagonal closed packed material beryllium are studied through dislocation junctions and the critical stress required to break them. Dislocation dynamics calculations (using the code ParaDiS) of junction maps are compared to an analytical line tension approximation in order to validate our model. Results show that the two models agree very well. Also the critical shear stress necessary to break 30{sup o} - 30{sup o} and 30{sup o} - 90{sup o} dislocation junctions is computed numerically. Yield surfaces are mapped out for these junctions to describe their stability regions as function of resolved shear stresses on the glide planes. The example of two non-coplanar binary dislocation junctions with slip planes [2-1-10] (01-10) and [-12-10] (0001) corresponding to a prismatic and basal slip respectively is chosen to verify and validate our implementation.

  11. Hybrid and Plug-In Electric Vehicles (Spanish Version) (Brochure), Clean Cities, Energy Efficiency & Renewable Energy (EERE)

    Alternative Fuels and Advanced Vehicles Data Center [Office of Energy Efficiency and Renewable Energy (EERE)]

    Los vehículos de accionamiento eléctrico se valen de la electricidad como fuente principal de energía o la utilizan para mejorar la efciencia de diseños vehiculares convencionales. Estos vehículos se pueden dividir en tres categorías: * Vehículos eléctricos híbridos (HEV, por sus siglas en inglés) * Vehículos eléctricos híbridos enchufables (PHEV, por sus siglas en inglés) * Vehículos totalmente eléctricos (EV, por sus siglas en inglés) Juntos, tienen el enorme potencial de

  12. Environmental restoration and waste management: An introduction. Student edition; Restauracion ambiental y administracion de residuos nucleares: Introduccion; Edicion estudiantil

    SciTech Connect (OSTI)

    Not Available

    1993-12-31

    For more than 40 years, the United States has produced nuclear weapons. These production activities generated both radioactive and hazardous waste and often contaminated the environment. For many years, the public was unaware of the problem and unable to do anything about it. All of this has changed. In response to recent public outcry, the former Secretary of Energy, Retired Admiral James D. Watkins, established the Office of Environmental Restoration and Waste Management (EM) in November 1989. The creation of EM was the first step toward correcting contamination problems from the past 40 years In this booklet, we at DOE, through the efforts of the students at Oak Hills High School of Cincinnati, Ohio, will introduce you to EM and encourage your involvement in this major program within the Department of Energy. [Espanol] Durante mas de 40 anos, los Estados Unidos fabricaron armamentos nucleares. Esta produccion genero residuos radiactivos y peligrosos y, en muchos casos, contaminaron el medio ambiente. Durante mucho tiempo, el publico norteamericano no tenia conocimiento de este problema y no pudo hacer nada para solucionarlo. Todo esto ha cambiado. Respondiendo a crecientes protestas publicas, el ex Secretario de Energia Almirante James D. Watkins, establecio en noviembre de 1989 la Subsecretaria de Administracion Ambiental. La creacion de esta Subsecretaria fue el primer paso que dio el Departamento de Energia para corregir los problemas de contaminacion ambiental de los ultimos 40 anos. En esta publicacion, los que trabajamos en el Departamento de Energia con la ayuda de los estudiantes de la Escuela Secundaria de Oak Hills, Cincinnati, Ohio, te introduciermos a la administracion ambiental y alentamos tu participacion en este programa de fundamental importancia en el Departamento de Energia.

  13. US DOE-EM On-Site Disposal Cell Working Group - Fostering Communication On Performance Assessment Challenges

    SciTech Connect (OSTI)

    Seitz, Roger R.; Suttora, Linda C.; Phifer, Mark

    2014-03-01

    On-site disposal cells are in use and being considered at several U.S. Department of Energy (USDOE) sites as the final disposition for large amounts of waste associated with cleanup of contaminated areas and facilities. These facilities are typically developed with regulatory oversight from States and/or the US Environmental Protection Agency (USEPA) in addition to USDOE. The facilities are developed to meet design standards for disposal of hazardous waste as well as the USDOE performance based standards for disposal of radioactive waste. The involvement of multiple and different regulators for facilities across separate sites has resulted in some differences in expectations for performance assessments and risk assessments (PA/RA) that are developed for the disposal facilities. The USDOE-EM Office of Site Restoration formed a working group to foster improved communication and sharing of information for personnel associated with these Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) disposal cells and work towards more consistent assumptions, as appropriate, for technical and policy considerations related to performance and risk assessments in support of a Record of Decision and Disposal Authorization Statement. The working group holds teleconferences, as needed, focusing on specific topics of interest. The topics addressed to date include an assessment of the assumptions used for performance assessments and risk assessments (PA/RAs) for on-site disposal cells, requirements and assumptions related to assessment of inadvertent intrusion, DOE Manual 435.1-1 requirements, and approaches for consideration of the long-term performance of liners and covers in the context of PAs. The working group has improved communication among the staff and oversight personnel responsible for onsite disposal cells and has provided a forum to identify and resolve common concerns.

  14. Ground-based multiwavelength observations of comet 103P/Hartley 2

    SciTech Connect (OSTI)

    Gicquel, A.; Villanueva, G. L.; Cordiner, M. A.; Milam, S. N.; Charnley, S. B.; Remijan, A. J.; Coulson, I. M.; Chuang, Y.-L.; Kuan, Y.-J. E-mail: stefanie.n.milam@nasa.gov E-mail: steven.b.charnley@nasa.gov E-mail: aremijan@nrao.edu E-mail: ylchuang@std.ntnu.edu.tz

    2014-10-10

    The Jupiter-family comet 103P/Hartley 2 (103P) was the target of the NASA EPOXI mission. In support of this mission, we conducted observations from radio to submillimeter wavelengths of comet 103P in the three weeks preceding the spacecraft rendezvous on UT 2010 November 4.58. This time period included the passage at perihelion and the closest approach of the comet to the Earth. Here, we report detections of HCN, H{sub 2}CO, CS, and OH and upper limits for HNC and DCN toward 103P using the Arizona Radio Observatory Kitt Peak 12 m telescope (ARO 12 m) and submillimeter telescope (SMT), the James Clerk Maxwell Telescope (JCMT), and the Green Bank Telescope (GBT). The water production rate, Q{sub H{sub 2O}} = (0.67-1.07) 10{sup 28} s{sup 1}, was determined from the GBT OH data. From the average abundance ratios of HCN and H{sub 2}CO relative to water (0.13 0.03% and 0.14 0.03%, respectively), we conclude that H{sub 2}CO is depleted and HCN is normal with respect to typically observed cometary mixing ratios. However, the abundance ratio of HCN with water shows a large diversity with time. Using the JCMT data, we measured an upper limit for the DCN/HCN ratio <0.01. Consecutive observations of ortho-H{sub 2}CO and para-H{sub 2}CO on November 2 (from data obtained at the JCMT) allowed us to derive an ortho:para ratio (OPR) of ?2.12 0.59 (1?), corresponding to T {sub spin} > 8 K (2?).

  15. PDR MODEL MAPPING OF PHYSICAL CONDITIONS VIA SPITZER/IRS SPECTROSCOPY OF H{sub 2}: THEORETICAL SUCCESS TOWARD NGC 2023-SOUTH

    SciTech Connect (OSTI)

    Sheffer, Y.; Wolfire, M. G.; Hollenbach, D. J.; Kaufman, M. J.; Cordier, M.

    2011-11-01

    We use the Infrared Spectrograph on Spitzer to observe the southern part of the reflection nebula NGC 2023, including the Southern Ridge, which is a photodissociation region (PDR) par excellence excited by HD 37903. Five pure-rotational H{sub 2} emission lines are detected and mapped over and around the Southern Ridge in order to compare with predicted level column densities from theoretical PDR models. We find very good agreement between PDR model predictions and emission line intensities and ratios measured with Spitzer, leading us to conclude that grain photoelectric heating sufficiently warms the gas to produce the observed H{sub 2} line emission via collisional excitation. On the Southern Ridge, we infer a hydrogen nucleus density n{sub H} Almost-Equal-To 2 Multiplication-Sign 10{sup 5} cm{sup -3} and radiation field strength {chi} Almost-Equal-To 10{sup 4} relative to the local Galactic interstellar radiation field. This high value for {chi} independently predicts a distance toward HD 37903 of 300 pc and is consistent with the most recent Hipparcos results. Over the map we find that both n{sub H} and {chi} vary by a factor of {approx}3. Such two-dimensional variations provide clues about the underlying three-dimensional structure of the Southern Ridge field, which appears to be the tip of a molecular cloud. We also map variations in excitation temperature and the ortho-to-para ratio, the latter attaining values of {approx}1.5-2.0 on the Southern Ridge, and find that PDR modeling can readily reproduce observed ortho-to-para ratios that are <3 for rotational excitation dominated by collisional processes. Last, the stars Sellgren C and G are discovered to be resolved on archival Hubble Space Telescope images into two point sources each, with separations of {approx}<0.''5.

  16. Practice Patterns of Radiotherapy in Cervical Cancer Among Member Groups of the Gynecologic Cancer Intergroup (GCIG)

    SciTech Connect (OSTI)

    Gaffney, David K. . E-mail: david.gaffney@hci.utah.edu; Du Bois, Andreas; Narayan, Kailash; Reed, Nick; Toita, Takafumi; Pignata, Sandro; Blake, Peter; Portelance, Lorraine; Sadoyze, Azmat; Poetter, Richard; Colombo, Alessandro; Randall, Marcus; Mirza, Mansoor R.; Trimble, Edward L.

    2007-06-01

    Purpose: The aim of this study was to describe radiotherapeutic practice of the treatment of cervical cancer in member groups of the Gynecologic Cancer Intergroup (GCIG). Methods and Materials: A survey was developed and distributed to the members of the GCIG focusing on details of radiotherapy practice. Different scenarios were queried including advanced cervical cancer, postoperative patients, and para-aortic-positive lymph node cases. Items focused on indications for radiation therapy, radiation fields, dose, use of chemotherapy, brachytherapy and others. The cooperative groups from North America were compared with the other groups to evaluate potential differences in radiotherapy doses. Results: A total of 39 surveys were returned from 13 different cooperative groups. For the treatment of advanced cervical cancer, external beam pelvic doses and total doses to point A were 47 + 3.5 Gy (mean + SD) and 79.1 + 7.9 Gy, respectively. Point A doses were not different between the North American cooperative groups compared with the others (p = 0.103). All groups used concomitant chemotherapy, with 30 of 36 respondents using weekly cisplatin. Of 33 respondents, 31 intervened for a low hemoglobin level. For a para-aortic field, the upper border was most commonly (15 of 24) at the T12-L1 interspace. Maintenance chemotherapy (after radiotherapy) was not performed by 68% of respondents. For vaginal brachytherapy after hysterectomy, 23 groups performed HDR brachytherapy and four groups used LDR brachytherapy. In the use of brachytherapy, there was no uniformity in dose prescription. Conclusions: Radiotherapy practices among member groups of the GCIG are similar in terms of both doses and use of chemotherapy.

  17. Modeling the Structural Response from a Propagating High Explosive Using Smooth Particle Hydrodynamics

    SciTech Connect (OSTI)

    Margraf, J

    2012-06-12

    This report primarily concerns the use of two massively parallel finite element codes originally written and maintained at Lawrence Livermore National Laboratory. ALE3D is an explicit hydrodynamics code commonly employed to simulate wave propagation from high energy scenarios and the resulting interaction with nearby structures. This coupled response ensures that a structure is accurately applied with a blast loading varying both in space and time. Figure 1 illustrates the radial outward propagation of a pressure wave due to a center detonated spherical explosive originating from the lower left. The radial symmetry seen in this scenario is lost when instead a cylindrocal charge is detonated. Figure 2 indicates that a stronger, faster traveling pressure wave occurs in the direction of the normal axis to the cylinder. The ALE3D name is derived because of the use of arbitrary-Lagrange-Eulerian elements in which the mesh is allowed to advect; a process through which the mesh is modified to alleviate tanlging and general mesh distortion often cuased by high energy scenarios. The counterpart to an advecting element is a Lagrange element, whose mesh moves with the material. Ideally all structural components are kept Lagrange as long as possible to preserve accuracy of material variables and minimize advection related errors. Advection leads to mixed zoning, so using structural Lagrange elements also improves the visualization when post processing the results. A simplified representation of the advection process is shown in Figure 3. First the mesh is distorted due to material motion during the Lagrange step. The mesh is then shifted to an idealized and less distorted state to prevent irregular zones caused by the Lagrange motion. Lastly, the state variables are remapped to the elements of the newly constructed mesh. Note that Figure 3 represents a purely Eulerian mesh relaxation because the mesh is relocated back to the pre-Lagrange position. This is the case when the material flows through a still mesh. This is not typically done in an ALE3D analysis, especially if Lagrange elements exist. Deforming Lagrange elements would certainly tangle with a Eulerian mesh eventually. The best method in this case is to have an advecting mesh positioned as some relaxed version of the pre and post Lagrange step; this gives the best opportunity of modeling a high energy event with a combination of Lagrange and ALE elements. Dyne3D is another explicit dynamic analysis code, ParaDyn being the parallel version. ParaDyn is used for predicting the transient response of three dimensional structures using Lagrangian solid mechanics. Large deformation and mesh tangling is often resolved through the use of an element deletion scheme. This is useful to accommodate component failure, but if it is done purely as a means to preserve a useful mesh it can lead to problems because it does not maintain continuity of the material bulk response. Whatever medium exists between structural components is typically not modeled in ParaDyn. Instead, a structure either has a known loading profile applied or given initial conditions. The many included contact algorithms can calculate the loading response of materials if and when they collide. A recent implementation of an SPH module in which failed or deleted material nodes are converted to independent particles is currently being utilized for a variety of spall related problems and high velocity impact scenarios. Figure 4 shows an example of a projectile, given an initial velocity, and how it fails the first plate which generates SPH particles which then interact with and damage the second plate.

  18. Tuning the reactivity of mononuclear nonheme manganese(iv)-oxo complexes by triflic acid

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Chen, Junying; Yoon, Heejung; Lee, Yong -Min; Seo, Mi Sook; Sarangi, Ritimukta; Fukuzumi, Shunichi; Nam, Wonwoo

    2015-04-14

    Triflic acid (HOTf)-bound nonheme Mn(IV)-oxo complexes, [(L)MnIV(O)]2+–(HOTf)2 (L = N4Py and Bn-TPEN; N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine and Bn-TPEN = N-benzyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine), were synthesized by adding HOTf to the solutions of the [(L)MnIV(O)]2+ complexes and were characterized by various spectroscopies. The one-electron reduction potentials of the MnIV(O) complexes exhibited a significant positive shift upon binding of HOTf. The driving force dependences of electron transfer (ET) from electron donors to the MnIV(O) and MnIV(O)–(HOTf)2 complexes were examined and evaluated in light of the Marcus theory of ET to determine the reorganization energies of ET. The smaller reorganization energies and much more positive reduction potentialsmore » of the [(L)MnIV(O)]2+–(HOTf)2 complexes resulted in greatly enhanced oxidation capacity towards one-electron reductants and para-X-substituted-thioanisoles. The reactivities of the Mn(IV)-oxo complexes were markedly enhanced by binding of HOTf, such as a 6.4 × 105-fold increase in the oxygen atom transfer (OAT) reaction (i.e., sulfoxidation). Such a remarkable acceleration in the OAT reaction results from the enhancement of ET from para-X-substituted-thioanisoles to the MnIV(O) complexes as revealed by the unified ET driving force dependence of the rate constants of OAT and ET reactions of [(L)MnIV(O)]2+–(HOTf)2. In contrast, deceleration was observed in the rate of H-atom transfer (HAT) reaction of [(L)MnIV(O)]2+–(HOTf)2 complexes with 1,4-cyclohexadiene as compared with those of the [(L)MnIV(O)]2+ complexes. Thus, the binding of two HOTf molecules to the MnIV(O) moiety resulted in remarkable acceleration of the ET rate when the ET is thermodynamically feasible. When the ET reaction is highly endergonic, the rate of the HAT reaction is decelerated due to the steric effect of the counter anion of HOTf.« less

  19. Tuning the reactivity of mononuclear nonheme manganese(iv)-oxo complexes by triflic acid

    SciTech Connect (OSTI)

    Chen, Junying; Yoon, Heejung; Lee, Yong -Min; Seo, Mi Sook; Sarangi, Ritimukta; Fukuzumi, Shunichi; Nam, Wonwoo

    2015-04-14

    Triflic acid (HOTf)-bound nonheme Mn(IV)-oxo complexes, [(L)MnIV(O)]2+(HOTf)2 (L = N4Py and Bn-TPEN; N4Py = N,N-bis(2-pyridylmethyl)-N-bis(2-pyridyl)methylamine and Bn-TPEN = N-benzyl-N,N',N'-tris(2-pyridylmethyl)ethane-1,2-diamine), were synthesized by adding HOTf to the solutions of the [(L)MnIV(O)]2+ complexes and were characterized by various spectroscopies. The one-electron reduction potentials of the MnIV(O) complexes exhibited a significant positive shift upon binding of HOTf. The driving force dependences of electron transfer (ET) from electron donors to the MnIV(O) and MnIV(O)(HOTf)2 complexes were examined and evaluated in light of the Marcus theory of ET to determine the reorganization energies of ET. The smaller reorganization energies and much more positive reduction potentials of the [(L)MnIV(O)]2+(HOTf)2 complexes resulted in greatly enhanced oxidation capacity towards one-electron reductants and para-X-substituted-thioanisoles. The reactivities of the Mn(IV)-oxo complexes were markedly enhanced by binding of HOTf, such as a 6.4 105-fold increase in the oxygen atom transfer (OAT) reaction (i.e., sulfoxidation). Such a remarkable acceleration in the OAT reaction results from the enhancement of ET from para-X-substituted-thioanisoles to the MnIV(O) complexes as revealed by the unified ET driving force dependence of the rate constants of OAT and ET reactions of [(L)MnIV(O)]2+(HOTf)2. In contrast, deceleration was observed in the rate of H-atom transfer (HAT) reaction of [(L)MnIV(O)]2+(HOTf)2 complexes with 1,4-cyclohexadiene as compared with those of the [(L)MnIV(O)]2+ complexes. Thus, the binding of two HOTf molecules to the MnIV(O) moiety resulted in remarkable acceleration of the ET rate when the ET is thermodynamically feasible. When the ET reaction is highly endergonic, the rate of the HAT reaction is decelerated due to the steric effect of the counter anion of HOTf.

  20. Herschel observations of extra-ordinary sources: H{sub 2}S as a probe of dense gas and possibly hidden luminosity toward the Orion KL hot core

    SciTech Connect (OSTI)

    Crockett, N. R.; Bergin, E. A.; Neill, J. L.; Black, J. H.; Blake, G. A.; Kleshcheva, M.

    2014-02-01

    We present Herschel/HIFI observations of the light hydride H{sub 2}S obtained from the full spectral scan of the Orion Kleinmann-Low nebula (Orion KL) taken as part of the Herschel Observations of EXtra-Ordinary Sources GT (guaranteed time) key program. In total, we observe 52, 24, and 8 unblended or slightly blended features from H{sub 2} {sup 32}S, H{sub 2} {sup 34}S, and H{sub 2} {sup 33}S, respectively. We only analyze emission from the so-called hot core, but emission from the plateau, extended ridge, and/or compact ridge are also detected. Rotation diagrams for ortho and para H{sub 2}S follow straight lines given the uncertainties and yield T {sub rot} = 141 12 K. This indicates H{sub 2}S is in local thermodynamic equilibrium and is well characterized by a single kinetic temperature or an intense far-IR radiation field is redistributing the population to produce the observed trend. We argue the latter scenario is more probable and find that the most highly excited states (E {sub up} ? 1000 K) are likely populated primarily by radiation pumping. We derive a column density, N {sub tot}(H{sub 2} {sup 32}S) = 9.5 1.9 10{sup 17} cm{sup 2}, gas kinetic temperature, T {sub kin} = 120{sub 10}{sup 13} K, and constrain the H{sub 2} volume density, n{sub H{sub 2}} ? 9 10 {sup 7} cm{sup 3}, for the H{sub 2}S emitting gas. These results point to an H{sub 2}S origin in markedly dense, heavily embedded gas, possibly in close proximity to a hidden self-luminous source (or sources), which are conceivably responsible for Orion KL's high luminosity. We also derive an H{sub 2}S ortho/para ratio of 1.7 0.8 and set an upper limit for HDS/H{sub 2}S of <4.9 10 {sup 3}.

  1. Quasi one-dimensional band dispersion and surface metallization in long-range ordered polymeric wires

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Vasseur, Guillaume; Fagot-Revurat, Yannick; Sicot, Muriel; Kierren, Bertrand; Moreau, Luc; Malterre, Daniel; Cardenas, Luis; Galeotti, Gianluca; Lipton-Duffin, Josh; Rosei, Frederico; et al

    2016-01-04

    We study the electronic structure of an ordered array of poly(para-phenylene) chains produced by surface-catalyzed dehalogenative polymerization of 1,4-dibromobenzene on copper (110). The quantization of unoccupied molecular states is measured as a function of oligomer length by scanning tunnelling spectroscopy, with Fermi level crossings observed for chains longer than ten phenyl rings. Angle-resolved photoelectron spectroscopy reveals a quasi-one-dimensional valence band as well as a direct gap of 1.15 eV, as the conduction band is partially filled through adsorption on the surface. Tight-binding modelling and ab initio density functional theory calculations lead to a full description of the organic band-structure, includingmore » the k-dispersion, the gap size and electron charge transfer mechanisms, highlighting a strong substrate-molecule interaction that drives the system into a metallic behaviour. In summary, we have fully characterized the band structure of a carbon-based conducting wire. This model system may be considered as a fingerprint of -conjugation of surface organic frameworks.« less

  2. Toluene nitration in irradiated nitric acid and nitrite solution

    SciTech Connect (OSTI)

    Gracy Elias; Bruce J. Mincher; Stephen P. Mezyk; Jim Muller; Leigh R. Martin

    2011-04-01

    The kinetics, mechanisms, and stable products produced for the aryl alkyl mild ortho-para director - toluene, in irradiated nitric acid and neutral nitrite solutions were investigated using ?, and pulse radiolysis. Electron pulse radiolysis was used to determine the bimolecular rate constants for the reaction of toluene with different transient species produced by irradiation. HPLC with UV detection was primarily used to assess the stable reaction products. GC-MS and LC-MS were used to confirm the results from HPLC. Free-radical nitration reaction products were found in irradiated acidic and neutral media. In acidic medium, the ring substitution and side chain substitution and oxidation produced different nitro products. In ring substitution, nitrogen oxide radicals were added mainly to hydroxyl radical-produced cyclohexadienyl radical, and in side chain substitution they were added to the carbon-centered benzyl radical produced by H-atom abstraction. In neutral nitrite toluene solution, radiolytic ring nitration products approached a statistically random distribution, suggesting a free-radical reaction involving addition of the NO2 radical.

  3. Evolution of Structure-Reactivity Correlations for the Hydrogen Abstraction Reaction by Hydroxyl Radical and Comparison with that by Chlorine Atom

    SciTech Connect (OSTI)

    Poutsma, Marvin L

    2013-01-01

    A structure-reactivity correlation for the reaction (HO + HCR3 HOH + CR3 ) has been formulated: log k298(per H) = 0.000630 rH2 0.151 rH 1.056 F 1.053 R 21.26 (r2 = 0.885; n = 70; mean unsigned deviation = 0.29 log units), where rH is the reaction enthalpy and F and R represent the dissection of Hammett s para constant into its field/inductive and resonance effects, and compared for the analogous case for Cl (ref 1). Although more exothermic, the dependence of HO on rH is somewhat greater than Cl . However the dependence on F and R is much less, suggestive of less charge separation in the transition state for the less electronegative HO . The range of k(OH) is significantly less than that of Cl , i.e., it is less dependent on substrate structure. Yet a cross-over exists such that k(Cl) > k(HO) predominates for more reactive cases whereas k(Cl) < k(OH) characterizes the less reactive. The Arrhenius parameters reveal that this cross-over results from a change in {E(Cl) E(OH)} from negative to positive. In contrast, whereas the A factors for both increase significantly as reactivity increases, {A(Cl) / A(OH)} always exceeds unity.

  4. Inner-shell and double ionization potentials of aminophenol isomers.

    SciTech Connect (OSTI)

    Kryzhevoi, N. V.; Santra, R.; Cederbaum, L. S.

    2011-01-01

    A comprehensive study of single and double core ionization potentials of the aminophenol molecule is reported. The role of relaxation, correlation, relativistic, and basis set effects in these potentials is clarified. Special attention is paid to the isomer dependence of the single and double core ionization potentials. Some of them are also compared with the respective values of the phenol and aniline molecules. It is shown that the core level single ionization potentials of the para-, meta-, and ortho-aminophenol molecules differ only slightly from each other, rendering these structural isomers challenging to distinguish for conventional x-ray photoelectron spectroscopy. In contrast, the energy needed to remove two core electrons from different atoms depends noticeably on the mutual arrangement and even on the relative orientations of the hydroxyl and amine groups. Together with the electrostatic repulsion between the two core holes, relaxation effects accompanying double core ionization play a crucial role here. The pronounced sensitivity of the double ionization potentials, therefore, enables a spectroscopic characterization of the electronic structure of aminophenol isomers by means of x-ray two-photon photoelectron spectroscopy.

  5. Observation of excited state charge transfer with fs/ps-CARS

    SciTech Connect (OSTI)

    Blom, Alex Jason

    2009-08-01

    Excited state charge transfer processes are studied using the fs/ps-CARS probe technique. This probe allows for multiplexed detection of Raman active vibrational modes. Systems studied include Michler's Ketone, Coumarin 120, 4-dimethylamino-4{prime}-nitrostilbene, and several others. The vibrational spectrum of the para di-substituted benzophenone Michler's Ketone in the first excited singlet state is studied for the first time. It is found that there are several vibrational modes indicative of structural changes of the excited molecule. A combined experimental and theoretical approach is used to study the simplest 7-amino-4-methylcoumarin, Coumarin 120. Vibrations observed in FTIR and spontaneous Raman spectra are assigned using density functional calculations and a continuum solvation model is used to predict how observed modes are affected upon inclusion of a solvent. The low frequency modes of the excited state charge transfer species 4-dimethylamino-4{prime}-nitrostilbene are studied in acetonitrile. Results are compared to previous work on this molecule in the fingerprint region. Finally, several partially completed projects and their implications are discussed. These include the two photon absorption of Coumarin 120, nanoconfinement in cyclodextrin cavities and sensitization of titania nanoparticles.

  6. Approaching the exa-scale: a real-world evaluation of rendering extremely large data sets

    SciTech Connect (OSTI)

    Patchett, John M; Ahrens, James P; Lo, Li - Ta; Browniee, Carson S; Mitchell, Christopher J; Hansen, Chuck

    2010-10-15

    Extremely large scale analysis is becoming increasingly important as supercomputers and their simulations move from petascale to exascale. The lack of dedicated hardware acceleration for rendering on today's supercomputing platforms motivates our detailed evaluation of the possibility of interactive rendering on the supercomputer. In order to facilitate our understanding of rendering on the supercomputing platform, we focus on scalability of rendering algorithms and architecture envisioned for exascale datasets. To understand tradeoffs for dealing with extremely large datasets, we compare three different rendering algorithms for large polygonal data: software based ray tracing, software based rasterization and hardware accelerated rasterization. We present a case study of strong and weak scaling of rendering extremely large data on both GPU and CPU based parallel supercomputers using Para View, a parallel visualization tool. Wc use three different data sets: two synthetic and one from a scientific application. At an extreme scale, algorithmic rendering choices make a difference and should be considered while approaching exascale computing, visualization, and analysis. We find software based ray-tracing offers a viable approach for scalable rendering of the projected future massive data sizes.

  7. Frequency dependent thermal expansion in binary viscoelasticcomposites

    SciTech Connect (OSTI)

    Berryman, James G.

    2007-12-01

    The effective thermal expansion coefficient beta* of abinary viscoelastic composite is shown to be frequency dependent even ifthe thermal expansion coefficients beta A and beta B of both constituentsare themselves frequency independent. Exact calculations for binaryviscoelastic systems show that beta* is related to constituent valuesbeta A, beta B, volume fractions, and bulk moduli KA, KB, as well as tothe overall bulk modulus K* of the composite system. Then, beta* isdetermined for isotropic systems by first bounding (or measuring) K* andtherefore beta*. For anisotropic systems with hexagonal symmetry, theprincipal values of the thermal expansion beta*perp and beta*para can bedetermined exactly when the constituents form a layered system. In allthe examples studied, it is shown explicitly that the eigenvectors of thethermoviscoelastic system possess non-negative dissipation -- despite thecomplicated analytical behavior of the frequency dependent thermalexpansivities themselves. Methods presented have a variety ofapplications from fluid-fluid mixtures to fluid-solid suspensions, andfrom fluid-saturated porous media to viscoelastic solid-solidcomposites.

  8. Generalized Framework and Algorithms for Illustrative Visualization of Time-Varying Data on Unstructured Meshes

    SciTech Connect (OSTI)

    Alexander S. Rattner; Donna Post Guillen; Alark Joshi

    2012-12-01

    Photo- and physically-realistic techniques are often insufficient for visualization of simulation results, especially for 3D and time-varying datasets. Substantial research efforts have been dedicated to the development of non-photorealistic and illustration-inspired visualization techniques for compact and intuitive presentation of such complex datasets. While these efforts have yielded valuable visualization results, a great deal of work has been reproduced in studies as individual research groups often develop purpose-built platforms. Additionally, interoperability between illustrative visualization software is limited due to specialized processing and rendering architectures employed in different studies. In this investigation, a generalized framework for illustrative visualization is proposed, and implemented in marmotViz, a ParaView plugin, enabling its use on variety of computing platforms with various data file formats and mesh geometries. Detailed descriptions of the region-of-interest identification and feature-tracking algorithms incorporated into this tool are provided. Additionally, implementations of multiple illustrative effect algorithms are presented to demonstrate the use and flexibility of this framework. By providing a framework and useful underlying functionality, the marmotViz tool can act as a springboard for future research in the field of illustrative visualization.

  9. Experimental Validation of LLNL Finite Element Codes for Nonlinear Seismic Simulations (Progress, Year 1 of 2)

    SciTech Connect (OSTI)

    Alves, S W; Noble, C R

    2006-12-06

    Shake table tests were performed on a full-scale 7-story slice of a reinforced concrete building at UC San Diego between October 2005 and January 2006. The tests were performed on the NEES Large High-Performance Outdoor Shake Table (LHPOST) at the Engelkirk Structural Engineering Center of UCSD. The structure was subjected to four uniaxial earthquake ground motions of increasing amplitude. The accelerations measured at the base of the structure and the measured roof displacements have been provided by UCSD. Details of the building construction have also been provided by UCSD. The measured response of this structure was used to assess the capability of the homogenized rebar model in DYNA3D/ParaDyn [1,2] to simulate the seismic response of reinforced concrete structures. The homogenized rebar model is a composite version of the Karagozian & Case concrete model [3]. Work has been done to validate this material model for use in blast simulations, but seismic simulations require longer durations. The UCSD experiment provides full-scale data that can be used to validate seismic modeling capabilities.

  10. Beam and Truss Finite Element Verification for DYNA3D

    SciTech Connect (OSTI)

    Rathbun, H J

    2007-07-16

    The explicit finite element (FE) software program DYNA3D has been developed at Lawrence Livermore National Laboratory (LLNL) to simulate the dynamic behavior of structures, systems, and components. This report focuses on verification of beam and truss element formulations in DYNA3D. An efficient protocol has been developed to verify the accuracy of these structural elements by generating a set of representative problems for which closed-form quasi-static steady-state analytical reference solutions exist. To provide as complete coverage as practically achievable, problem sets are developed for each beam and truss element formulation (and their variants) in all modes of loading and physical orientation. Analyses with loading in the elastic and elastic-plastic regimes are performed. For elastic loading, the FE results are within 1% of the reference solutions for all cases. For beam element bending and torsion loading in the plastic regime, the response is heavily dependent on the numerical integration rule chosen, with higher refinement yielding greater accuracy (agreement to within 1%). Axial loading in the plastic regime produces accurate results (agreement to within 0.01%) for all integration rules and element formulations. Truss elements are also verified to provide accurate results (within 0.01%) for elastic and elastic-plastic loading. A sample problem to verify beam element response in ParaDyn, the parallel version DYNA3D, is also presented.

  11. The structure of the catalytic domain of a plant cellulose synthase and its assembly into dimers

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Olek, Anna T.; Rayon, Catherine; Makowski, Lee; Kim, Hyung Rae; Ciesielski, Peter; Badger, John; Paul, Lake N.; Ghosh, Subhangi; Kihara, Daisuke; Crowley, Michael; et al

    2014-07-10

    Cellulose microfibrils are para-crystalline arrays of several dozen linear (1→4)-β-d-glucan chains synthesized at the surface of the cell membrane by large, multimeric complexes of synthase proteins. Recombinant catalytic domains of rice (Oryza sativa) CesA8 cellulose synthase form dimers reversibly as the fundamental scaffold units of architecture in the synthase complex. Specificity of binding to UDP and UDP-Glc indicates a properly folded protein, and binding kinetics indicate that each monomer independently synthesizes single glucan chains of cellulose, i.e., two chains per dimer pair. In contrast to structure modeling predictions, solution x-ray scattering studies demonstrate that the monomer is a two-domain, elongatedmore » structure, with the smaller domain coupling two monomers into a dimer. The catalytic core of the monomer is accommodated only near its center, with the plant-specific sequences occupying the small domain and an extension distal to the catalytic domain. This configuration is in stark contrast to the domain organization obtained in predicted structures of plant CesA. As a result, the arrangement of the catalytic domain within the CesA monomer and dimer provides a foundation for constructing structural models of the synthase complex and defining the relationship between the rosette structure and the cellulose microfibrils they synthesize.« less

  12. Carborane-Based Metal-Organic Framework with High Methane and Hydrogen Storage Capacities

    SciTech Connect (OSTI)

    Kennedy, RD; Krungleviciute, V; Clingerman, DJ; Mondloch, JE; Peng, Y; Wilmer, CE; Sarjeant, AA; Snurr, RQ; Hupp, JT; Yildirim, T; Farha, OK; Mirkin, CA

    2013-09-10

    A Cu-carborane-based metal organic framework (MOF), NU-135, which contains a quasi-spherical para-carborane moiety, has been synthesized and characterized. NU-135 exhibits a pore volume of 1.02 cm(3)/g and a gravimetric BET surface area of ca. 2600 m(2)/g, and thus represents the first highly porous carborane-based MOF. As a consequence of the, unique geometry of the carborane unit, NU-135 has a very high volumetric BET surface area of ca. 1900 m(2)/cm(3). CH4, CO2, and H-2 adsorption isotherms were measured over a broad range of pressures and temperatures and are in good agreement with computational predictions. The methane storage capacity of NU-135 at 35 bar and 298 K is ca. 187 v(STP)/v. At 298 K, the pressure required to achieve a methane storage density comparable to that of a compressed natural gas (CNG) tank pressurized to 212 bar, which is a typical storage pressure, is only 65 bar. The methane working capacity (5-65 bar) is 170 v(STP)/v. The volumetric hydrogen storage capacity at 55 bar and 77 K is 49 g/L. These properties are comparable to those of current record holders in the area of methane and hydrogen storage. This initial example lays the groundwork for carborane-based materials with high surface areas.

  13. Predicting Efficient Antenna Ligands for Tb(III) Emission

    SciTech Connect (OSTI)

    Samuel, Amanda P.S.; Xu, Jide; Raymond, Kenneth

    2008-10-06

    A series of highly luminescent Tb(III) complexes of para-substituted 2-hydroxyisophthalamide ligands (5LI-IAM-X) has been prepared (X = H, CH{sub 3}, (C=O)NHCH{sub 3}, SO{sub 3}{sup -}, NO{sub 2}, OCH{sub 3}, F, Cl, Br) to probe the effect of substituting the isophthalamide ring on ligand and Tb(III) emission in order to establish a method for predicting the effects of chromophore modification on Tb(III) luminescence. The energies of the ligand singlet and triplet excited states are found to increase linearly with the {pi}-withdrawing ability of the substituent. The experimental results are supported by time-dependent density functional theory (TD-DFT) calculations performed on model systems, which predict ligand singlet and triplet energies within {approx}5% of the experimental values. The quantum yield ({Phi}) values of the Tb(III) complex increases with the triplet energy of the ligand, which is in part due to the decreased non-radiative deactivation caused by thermal repopulation of the triplet. Together, the experimental and theoretical results serve as a predictive tool that can be used to guide the synthesis of ligands used to sensitize lanthanide luminescence.

  14. Alkali metal cation complexation by 1,3-alternate, mono-ionisable calix[4]arene-benzocrown-6 compounds

    DOE Public Access Gateway for Energy & Science Beta (PAGES Beta)

    Surowiec, Malgorzata A.; Custelcean, Radu; Surowiec, Kazimierz; Bartsch, Richard A.

    2014-04-23

    Alkali metal cation extraction behavior for two series of 1,3-alternate, mono-ionizable calix[4]arene-benzocrown-6 compounds is examined. In Series 1, the proton-ionizable group is a substituent on the benzo group of the polyether ring that directs it away from the crown ether cavity. In Series 2, the proton-ionizable group is attached to one para position in the calixarene framework, thus positioning it over the crown ether ring. Competitive solvent extraction of alkali metal cations from aqueous solutions into chloroform shows high Cs+ efficiency and selectivity. Single-species extraction pH profiles of Cs+ for Series 1 and 2 ligands with the same proton-ionizable groupmore » are very similar. Thus, association of Cs+ with the calixcrown ring is more important than the the proton-ionizable group’s position in relation to the crown ether cavity. Solid-state structures are presented for two unionized ligands from Series 2, as is a crystal containing two different ionized ligand–Cs+ complexes.« less

  15. Proof-of-concept of moving through casing resistivity apparatus. Final report, October 1, 1989--January 31, 1993

    SciTech Connect (OSTI)

    Vail, W.B.; Momii, S.T.

    1997-03-01

    ParaMagnetic Logging, Inc. (PML) demonstrated for the first time during 1990 in a Test Well located in Forth Worth, Texas that formation resistivity could be measured, in-principle, from within cased wells with the Through Casing Resistivity Tool (TCRT) designed and built by PML. Early results from this first instrument provided the impetus to investigate measurements methods to increase data acquisition rates and mechanical designs to improve vertical resolution which were implemented in the second experimental version of the TCRT. PML investigated the design requirements for a tool that could continuously move upward within a cased well. It was found that although such measurements can be done, various interfering signals, including those identified as due to the Triboelectric Effect, would mask the weak borehole casing signals if standard wirelines and components from the industry are utilized which limit the amount of electrical current delivered to the well. Extensive laboratory measurements were performed with the Moving Test Jig to investigate the properties of the Triboelectric Effect. Successful methods of measurement were devised to achieve acceptable performance objectives and to overcome problems with the Triboelectric Effect. One such method is called the Slider Method of Measurement.

  16. Design progress of cryogenic hydrogen system for China Spallation Neutron Source

    SciTech Connect (OSTI)

    Wang, G. P.; Zhang, Y.; Xiao, J.; He, C. C.; Ding, M. Y.; Wang, Y. Q.; Li, N.; He, K.

    2014-01-29

    China Spallation Neutron Source (CSNS) is a large proton accelerator research facility with 100 kW beam power. Construction started in October 2011 and is expected to last 6.5 years. The cryogenic hydrogen circulation is cooled by a helium refrigerator with cooling capacity of 2200 W at 20 K and provides supercritical hydrogen to neutron moderating system. Important progresses of CSNS cryogenic system were concluded as follows. Firstly, process design of cryogenic system has been completed including helium refrigerator, hydrogen loop, gas distribution, and safety interlock. Secondly, an accumulator prototype was designed to mitigate pressure fluctuation caused by dynamic heat load from neutron moderation. Performance test of the accumulator has been carried out at room and liquid nitrogen temperature. Results show the accumulator with welding bellows regulates hydrogen pressure well. Parameters of key equipment have been identified. The contract for the helium refrigerator has been signed. Mechanical design of the hydrogen cold box has been completed, and the hydrogen pump, ortho-para hydrogen convertor, helium-hydrogen heat exchanger, hydrogen heater, and cryogenic valves are in procurement. Finally, Hydrogen safety interlock has been finished as well, including the logic of gas distribution, vacuum, hydrogen leakage and ventilation. Generally, design and construction of CSNS cryogenic system is conducted as expected.

  17. Image Composition Engine for Tiles

    Energy Science and Technology Software Center (OSTI)

    2011-08-22

    The Image Composition Engine for Tiles (lceT) is a high-performance sort-last parallel rendering library. It is designed to be used in parallel applications requiring rendering. The primary purpose of IceT is to be integrated into parallel visualization applications such as ParaView to provide parallel rendering capabilities. The Image Composition Engine for Tiles (lceT) is a high-performance sort-last parallel rendering library. IceT uses a "sort-Iasf' approach to rendering. Each process in a parallel application independently rendersmore » a local piece of geometry. The resulting images are given to IceT, and IceT combines the images together to form a single cohesive image. Ice T is also capable of driving tiled displays, largeformat displays comprising an array of smaller displays. To this end IceT can collect the smaller tile images and organize them such that the entire tiled display can be driven. Ice T takes advantage of spatial coherence in geometry by identifying empty regions of the display and reducing the overall required work.« less

  18. Renewable Electricity Grid Integration Roadmap for Mexico. Supplement to the IEA Expert Group Report on Recommended Practices for Wind Integration Studies

    SciTech Connect (OSTI)

    Parsons, Brian; Cochran, Jaquelin; Watson, Andrea; Katz, Jessica; Bracho, Ricardo

    2015-08-19

    As a recognized leader in efforts to mitigate global climate change, the Government of Mexico (GOM) works proactively to reduce emissions, demonstrating strong political will and capacity to comprehensively address climate change. Since 2010, the U.S. government (USG) has supported these efforts by partnering with Mexico under the Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program. Through the program, the USG has partnered with Mexico’s Ministry of Energy (SENER), as well as other government agencies, to support GOM in reaching its clean energy and climate change goals. Specifically, the EC-LEDS program is supporting GOM’s clean energy goal of generating 35% of its electricity from renewable energy (RE) by 2024. EC-LEDS, through the U.S. Agency for International Development (USAID) and the U.S Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL), has been collaborating with SENER and GOM interagency working group—the Consejo Consultivo para las Energías Renovables (Consultative Council on Renewable Energy)—to create a grid integration roadmap for variable RE. 1 A key objective in creating a grid integration roadmap is assessing likely impacts of wind and solar energy on the power system and modifying planning and operations accordingly. This paper applies best practices in conducting a grid integration study to the Mexican context.

  19. Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) Final Report

    SciTech Connect (OSTI)

    Williams, Dean N.

    2014-05-19

    A partnership across government, academic, and private sectors has created a novel system that enables climate researchers to solve current and emerging data analysis and visualization challenges. The Ultrascale Visualization Climate Data Analysis Tools (UV-CDAT) software project utilizes the Python application programming interface (API) combined with C/C++/Fortran implementations for performance-critical software that offers the best compromise between "scalability" and ease-of-use. The UV-CDAT system is highly extensible and customizable for high-performance interactive and batch visualization and analysis for climate science and other disciplines of geosciences. For complex, climate data-intensive computing, UV-CDATs inclusive framework supports Message Passing Interface (MPI) parallelism as well as taskfarming and other forms of parallelism. More specifically, the UV-CDAT framework supports the execution of Python scripts running in parallel using the MPI executable commands and leverages Department of Energy (DOE)-funded general-purpose, scalable parallel visualization tools such as ParaView and VisIt. This is the first system to be successfully designed in this way and with these features. The climate community leverages these tools and others, in support of a parallel client-server paradigm, allowing extreme-scale, server-side computing for maximum possible speed-up.

  20. Low-temperature catalytic gasification of wet industrial wastes. FY 1993--1994 interim report

    SciTech Connect (OSTI)

    Elliott, D.C.; Hart, T.R.; Neuenschwander, G.G.; Deverman, G.S.; Werpy, T.A.; Phelps, M.R.; Baker, E.G.; Sealock, L.J. Jr.

    1995-03-01

    Process development research is continuing on a low-temperature, catalytic gasification system that has been demonstrated to convert organics in water (dilute or concentrated) to useful and environmentally safe gases. The system, licensed under the trade name Thermochemical Environmental Energy System (TEESO), treats a wide variety of feedstocks ranging from hazardous organics in water to waste sludges from food processing. The current research program is focused on the use of continuous-feed, tubular reactors systems for testing catalysts and feedstocks in the process. A range of catalysts have been tested, including nickel and other base metals, as well as ruthenium and other precious metals. Results of extensive testing show that feedstocks, ranging from 2% para-cresol in water to potato waste and spent grain, can be processed to > 99% reduction of chemical oxygen demand (COD). The product fuel gas contains from 40% up to 75% methane, depending on the feedstock. The balance of the gas is mostly carbon dioxide with < 5% hydrogen and usually < 1% ethane and higher hydrocarbons. The byproduct water stream carries residual organics from 10 to 1,000 mg/l COD, depending on the feedstock. The level of development of TEES has progressed to the initial phases of industrial process demonstration. Testing of industrial waste streams is under way at both the bench scale and engineering scale of development.

  1. Changes in expression of renal Oat1, Oat3 and Mrp2 in cisplatin-induced acute renal failure after treatment of JBP485 in rats

    SciTech Connect (OSTI)

    Liu, Tao, E-mail: liutaomedical@qq.com [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China)] [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Meng, Qiang, E-mail: mengq531@yahoo.cn [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China) [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Provincial Key Laboratory for Pharmacokinetics and Transport, Liaoning, Dalian Medical University (China); Wang, Changyuan, E-mail: wangcyuan@163.com [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China) [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Provincial Key Laboratory for Pharmacokinetics and Transport, Liaoning, Dalian Medical University (China); Liu, Qi, E-mail: llaqii@yahoo.com.cn [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China) [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Provincial Key Laboratory for Pharmacokinetics and Transport, Liaoning, Dalian Medical University (China); Guo, Xinjin, E-mail: guo.xinjin@163.com [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China)] [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Sun, Huijun, E-mail: sunhuijun@hotmail.com [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China) [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Provincial Key Laboratory for Pharmacokinetics and Transport, Liaoning, Dalian Medical University (China); Peng, Jinyong, E-mail: jinyongpeng2005@163.com [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China) [Department of Clinical Pharmacology, College of Pharmacy, Dalian Medical University, 9 West Section, Lvshun South Road, Lvshunkou District, Dalian 116044 (China); Provincial Key Laboratory for Pharmacokinetics and Transport, Liaoning, Dalian Medical University (China); and others

    2012-11-01

    The purpose of this study is to investigate whether the effect of cyclo-trans-4-L-hydroxyprolyl-L-serine (JBP485) on acute renal failure (ARF) induced by cisplatin is related to change in expression of renal Oat1, Oat3 and Mrp2 in rats. JBP485 reduced creatinine, blood urea nitrogen (BUN) and indoxyl sulfate (IS) in plasma and malondialdehyde (MDA) in kidney, and recovered the glomerular filtration rate (GFR) and the activity of superoxide dismutase (SOD) in cisplatin-treated rats. The plasma concentration of PAH (para-aminohippurate) determined by LCMS/MS was increased markedly after intravenous administration of cisplatin, whereas cumulative urinary excretion of PAH and the uptake of PAH in kidney slices were significantly decreased. qRT-PCR and Western-blot showed a decrease in mRNA and protein of Oat1 and Oat3, an increase in mRNA and protein of Mrp2 in cisplatin-treated rats, and an increase in IS (a uremic toxin) after co-treatment with JBP485. It indicated that JBP485 promoted urinary excretion of toxins by upregulating renal Mrp2. This therefore gives in part the explanation about the mechanism by which JBP485 improves ARF induced by cisplatin in rats. -- Highlights: ? Cisplatin induces acute renal failure (ARF). ? The expression of Oat1, Oat3 and Mrp2 were changed during ARF. ? The regulated expression of Oat1, Oat3 and Mrp2 is an adaptive protected response. ? JBP485 could facilitate the adaptive protective action.

  2. Mechanistic Investigation of Acid-Catalyzed Cleavage of Aryl-Ether Linkages: Implications for Lignin Depolymerization

    SciTech Connect (OSTI)

    Sturgeon, M. R.; Kim, S.; Chmely, S. C.; Foust, T. D.; Beckham, G. T.

    2013-01-01

    Carbon-oxygen bonds are the primary inter-monomer linkages lignin polymers in plant cell walls, and as such, catalyst development to cleave these linkages is of paramount importance to deconstruct biomass to its constituent monomers for the production of renewable fuels and chemicals. For many decades, acid catalysis has been used to depolymerize lignin. Lignin is a primary component of plant cell walls, which is connected primarily by aryl-ether linkages, and the mechanism of its deconstruction by acid is not well understood, likely due to its heterogeneous and complex nature compared to cellulose. For effective biomass conversion strategies, utilization of lignin is of significant relevance and as such understanding the mechanisms of catalytic lignin deconstruction to constituent monomers and oligomers is of keen interest. Here, we present a comprehensive experimental and theoretical study of the acid catalysis of a range of dimeric species exhibiting the b-O-4 linkage, the most common inter-monomer linkage in lignin. We demonstrate that the presence of a phenolic species dramatically increases the rate of cleavage in acid at 150 degrees C. Quantum mechanical calculations on dimers with the para-hydroxyl group demonstrate that this acid-catalyzed pathway differs from the nonphenolic dimmers. Importantly, this result implies that depolymerization of native lignin in the plant cell wall will proceed via an unzipping mechanism wherein b-O-4 linkages will be cleaved from the ends of the branched, polymer chains inwards toward the center of the polymer. To test this hypothesis further, we synthesized a homopolymer of b-O-4 with a phenolic hydroxyl group, and demonstrate that it is cleaved in acid from the end containing the phenolic hydroxyl group. This result suggests that genetic modifications to lignin biosynthesis pathways in plants that will enable lower severity processes to fractionate lignin for upgrading and for easier access to the carbohydrate fraction of the plant cell wall.

  3. VisIO: enabling interactive visualization of ultra-scale, time-series data via high-bandwidth distributed I/O systems

    SciTech Connect (OSTI)

    Mitchell, Christopher J; Ahrens, James P; Wang, Jun

    2010-10-15

    Petascale simulations compute at resolutions ranging into billions of cells and write terabytes of data for visualization and analysis. Interactive visuaUzation of this time series is a desired step before starting a new run. The I/O subsystem and associated network often are a significant impediment to interactive visualization of time-varying data; as they are not configured or provisioned to provide necessary I/O read rates. In this paper, we propose a new I/O library for visualization applications: VisIO. Visualization applications commonly use N-to-N reads within their parallel enabled readers which provides an incentive for a shared-nothing approach to I/O, similar to other data-intensive approaches such as Hadoop. However, unlike other data-intensive applications, visualization requires: (1) interactive performance for large data volumes, (2) compatibility with MPI and POSIX file system semantics for compatibility with existing infrastructure, and (3) use of existing file formats and their stipulated data partitioning rules. VisIO, provides a mechanism for using a non-POSIX distributed file system to provide linear scaling of 110 bandwidth. In addition, we introduce a novel scheduling algorithm that helps to co-locate visualization processes on nodes with the requested data. Testing using VisIO integrated into Para View was conducted using the Hadoop Distributed File System (HDFS) on TACC's Longhorn cluster. A representative dataset, VPIC, across 128 nodes showed a 64.4% read performance improvement compared to the provided Lustre installation. Also tested, was a dataset representing a global ocean salinity simulation that showed a 51.4% improvement in read performance over Lustre when using our VisIO system. VisIO, provides powerful high-performance I/O services to visualization applications, allowing for interactive performance with ultra-scale, time-series data.

  4. Computational mechanics

    SciTech Connect (OSTI)

    Raboin, P J

    1998-01-01

    The Computational Mechanics thrust area is a vital and growing facet of the Mechanical Engineering Department at Lawrence Livermore National Laboratory (LLNL). This work supports the development of computational analysis tools in the areas of structural mechanics and heat transfer. Over 75 analysts depend on thrust area-supported software running on a variety of computing platforms to meet the demands of LLNL programs. Interactions with the Department of Defense (DOD) High Performance Computing and Modernization Program and the Defense Special Weapons Agency are of special importance as they support our ParaDyn project in its development of new parallel capabilities for DYNA3D. Working with DOD customers has been invaluable to driving this technology in directions mutually beneficial to the Department of Energy. Other projects associated with the Computational Mechanics thrust area include work with the Partnership for a New Generation Vehicle (PNGV) for ''Springback Predictability'' and with the Federal Aviation Administration (FAA) for the ''Development of Methodologies for Evaluating Containment and Mitigation of Uncontained Engine Debris.'' In this report for FY-97, there are five articles detailing three code development activities and two projects that synthesized new code capabilities with new analytic research in damage/failure and biomechanics. The article this year are: (1) Energy- and Momentum-Conserving Rigid-Body Contact for NIKE3D and DYNA3D; (2) Computational Modeling of Prosthetics: A New Approach to Implant Design; (3) Characterization of Laser-Induced Mechanical Failure Damage of Optical Components; (4) Parallel Algorithm Research for Solid Mechanics Applications Using Finite Element Analysis; and (5) An Accurate One-Step Elasto-Plasticity Algorithm for Shell Elements in DYNA3D.

  5. Spectral ellipsometry of a nanodiamond composite

    SciTech Connect (OSTI)

    Yastrebov, S. G. Gordeev, S. K.; Garriga, M.; Alonso, I. A.; Ivanov-Omskii, V. I.

    2006-07-15

    Optical properties of a nanodiamond composite were analyzed by methods of spectral ellipsometry in the range of photon energies 1.4-5 eV, which are characteristic of {pi}-{pi}* transitions in amorphous carbon. The nanocomposite was synthesized by molding nanodiamond powder with subsequent binding of diamond nanoparticles by pyrocarbon formed as a result of the heterogeneous chemical reaction of methane decomposition. The dispersion curves of the imaginary and real parts of the dielectric function were reconstructed. It is shown that the imaginary part of the dielectric function can be represented as the sum of two components generated by the two types of {pi}-{pi}* optical transitions. The maximum contribution of the transitions of the first and second types manifests itself at energies of 2.6 and 5.6 eV, respectively, which correspond to peaks in optical density at 2.9 and 6.11 eV. It was established that the main specific features of the normalized optical density of the nanodiamond composite almost coincide with those for poly(para-phenylenevinylene). It was found that the energy of a {sigma} + {pi} plasmon of the pyrocarbon component of the nanodiamond composite is 24.2 eV. On the basis on this value, the pyrocarbon density matrix was estimated to be 2 g/cm{sup 3}. Within the concepts of optimum filling of an elementary volume by carbon atoms in an amorphous material with such a density, the allotropic composition of the pyrocarbon matrix was restored.

  6. Reactions of the CN Radical with Benzene and Toluene: Product Detection and Low-Temperature Kinetics

    SciTech Connect (OSTI)

    Trevitt, Adam J.; Goulay, Fabien; Taatjes, Craig A.; Osborn, David L.; Leone, Stephen R.

    2009-12-23

    Low temperature rate coefficients are measured for the CN + benzene and CN + toluene reactions using the pulsed Laval nozzle expansion technique coupled with laser-induced fluorescence detection. The CN + benzene reaction rate coefficient at 105, 165 and 295 K is found to be relatively constant over this temperature range, 3.9 - 4.9 x 10-10 cm3 molecule-1 s-1. These rapid kinetics, along with the observed negligible temperature dependence, are consistent with a barrierless reaction entrance channel and reaction efficiencies approaching unity. The CN + toluene reaction is measured to have a slower rate coefficient of 1.3 x 10-10 cm3 molecule-1 s-1 at 105 K. At room temperature, non-exponential decay profiles are observed for this reaction that may suggest significant back-dissociation of intermediate complexes. In separate experiments, the products of these reactions are probed at room temperature using synchrotron VUV photoionization mass spectrometry. For CN + benzene, cyanobenzene (C6H5CN) is the only product recorded with no detectable evidence for a C6H5 + HCN product channel. In the case of CN + toluene, cyanotoluene (NCC6H4CH3) constitutes the only detected product. It is not possible to differentiate among the ortho, meta and para isomers of cyanotoluene because of their similar ionization energies and the ~;; 40 meV photon energy resolution of the experiment. There is no significant detection of benzyl radicals (C6H5CH2) that would suggest a H-abstraction or a HCN elimination channel is prominent at these conditions. As both reactions are measured to be rapid at 105 K, appearing to have barrierless entrance channels, it follows that they will proceed efficiently at the temperatures of Saturn?s moon Titan (~;;100 K) and are also likely to proceed at the temperature of interstellar clouds (10-20 K).

  7. Ultraviolet stimulation of hydrogen peroxide production using aminoindazole, diaminopyridine, and phenylenediamine solid polymer complexes of Zn(II)

    SciTech Connect (OSTI)

    Hayes, Jennifer A.; Schubert, David M.; Amonette, James E.; Nachimuthu, Ponnusamy; Disselkamp, Robert S.

    2008-06-25

    Hydrogen peroxide is a valuable chemical commodity whose production relies on expensive methods. If an efficient, sustainable, and inexpensive solar-mediated production method could be developed from the reaction between dioxygen and water then its use as a fuel may be possible and gain acceptance. Hydrogen peroxide at greater than 10 M possesses a high specific energy, is environmentally clean, and is easily stored. However, the current method of manufacturing H2O2 via the anthraquinone process is environmentally unfriendly making the unexplored nature of its photochemical production from solar irradiation of interest. Here the concentration and quantum yield of hydrogen peroxide produced in an ultraviolet (UV-B) irradiated environment using aromatic and nitrogen-heterocyclic ring complexes of zinc(II) as solid substrates was studied. The amino-substituted isomers of the substrates indazole, pyridine, and phenylenediamine solid polymer complexes are examined. Samples exposed to the ambient atmosphere (e.g., aerated) were irradiated with a low power lamp with emission from 280-360 nm. Irradiation of various zinc complexes revealed Zn-5-aminoindazole to have the greatest first-day production of 63 mM/day with a 37% quantum yield. Para-phenylenediamine (PPAM) showed the greatest long-term stability and thus suggests H2O2 is produced photocatalytically. Isomeric forms of the catalysts organic components (e.g., amino groups) did have an effect on the production. Irradiation of diaminopyridine isomers indicated 2,3-diamino and 3,4-diamino structures were the most productive, each generating 32 mM/day hydrogen peroxide. However, the 2,5-diamino isomer showed no peroxide production. A significant decrease in hydrogen peroxide production in all but PPAM was noticed in the samples, suggesting the possibility of a catalyst poisoning mechanism. The samples ability to produce H2O2 is rationalized by proposing a reaction mechanism and examining the stability of the resonance structures of the different isomers.

  8. THE CHEMICAL AND RADIATION RESISTANCE OF POLYPHENYLENE SULFIIDE AS ENCOUNTERED IN THE MODULAR CAUSTIC SIDE SOLVENT EXTRACTION PROCESSES

    SciTech Connect (OSTI)

    Fondeur, F.; Herman, D.; Poirier, M.; Fink, S.

    2011-06-30

    Polyphenylene sulfide (PPS) is a semicrystalline polymer with excellent engineering plastic properties and suitable processing temperatures. PPS can also be made containing branches (using a trifunctional monomer) and with crosslinked microstructure (when curing the monomer at high temperature in the presence of oxygen). PPS is made from the condensation reaction between para-dichlorobenzene and sodium sulfide with the assistance of a catalyst (to lower the activation barrier). The synthesis conditions for making PPS has evolved since its invention in the 1960's to the optimal conditions developed by the Philips Corporation in the 1970's. The resulting polymer consists of chemically stable molecular moieties such as benzene rings and ether like sulfur linkages between the aromatic rings. Polyphenylene sulfide (PPS) is extremely resistant to gamma irradiation, caustic solution, and dilute nitric acid. PPS is the material of construction for the coalescers used in the Modular Caustic-Side Solvent Extraction Unit (MCU). After applying the equivalent of 3.3 E8 rad (330 Mrad), or the equivalent of 11 years of gamma irradiation (assuming a stripping solution concentration of 7.5 Ci/gal), and several months of exposures to 3M caustic solution and caustic salt simulant, no dimensional changes nor chemical changes were detected in PPS whether the PPS was in fiber form or in a composite with E-glass fibers. However, PPS acts as a media for heterogeneous nucleation. In particular, PPS appears to favor aluminosilicate formation in saturated solutions of aluminum and silicon in caustic environments. Parallel testing, in progress, is examining the stability of PPS when exposed to the new solvent formulation under development for MCU. Preliminary data, after two months of exposure, demonstrates PPS is stable to the new solvent.

  9. SHOCK-ENHANCED C{sup +} EMISSION AND THE DETECTION OF H{sub 2}O FROM THE STEPHAN'S QUINTET GROUP-WIDE SHOCK USING HERSCHEL

    SciTech Connect (OSTI)

    Appleton, P. N.; Lord, S.; Lu, N.; Guillard, P.; Boulanger, F.; Pineau des Forts, G.; Cluver, M. E.; Konstantopoulos, I.; Ogle, P.; Falgarone, E.; Duc, P.-A.; Gallagher, S.; Gao, Y.; Jarrett, T.; Lisenfeld, U.; Peterson, B. W.; Struck, C.; Sturm, E.; Tuffs, R.; and others

    2013-11-01

    We present the first Herschel spectroscopic detections of the [O I] 63 ?m and [C II] 158 ?m fine-structure transitions, and a single para-H{sub 2}O line from the 35 15 kpc{sup 2} shocked intergalactic filament in Stephan's Quintet. The filament is believed to have been formed when a high-speed intruder to the group collided with a clumpy intergroup gas. Observations with the PACS spectrometer provide evidence for broad (>1000 km s{sup 1}) luminous [C II] line profiles, as well as fainter [O I] 63 ?m emission. SPIRE FTS observations reveal water emission from the p-H{sub 2}O (1{sub 11}-0{sub 00}) transition at several positions in the filament, but no other molecular lines. The H{sub 2}O line is narrow and may be associated with denser intermediate-velocity gas experiencing the strongest shock-heating. The [C II]/PAH{sub tot} and [C II]/FIR ratios are too large to be explained by normal photo-electric heating in photodissociation regions. H II region excitation or X-ray/cosmic-ray heating can also be ruled out. The observations lead to the conclusion that a large fraction the molecular gas is diffuse and warm. We propose that the [C II], [O I], and warm H{sub 2} line emission is powered by a turbulent cascade in which kinetic energy from the galaxy collision with the intergalactic medium is dissipated to small scales and low velocities, via shocks and turbulent eddies. Low-velocity magnetic shocks can help explain both the [C II]/[O I] ratio, and the relatively high [C II]/H{sub 2} ratios observed. The discovery that [C II] emission can be enhanced, in large-scale turbulent regions in collisional environments, has implications for the interpretation of [C II] emission in high-z galaxies.

  10. Metal ion complexation by ionizable crown ethers. Final report, January 1, 1988--June 30, 1994

    SciTech Connect (OSTI)

    Bartsch, R.A.

    1994-12-31

    During the report period a variety of new lipophilic ionizable crown ethers with pendent proton-ionizable groups has been synthesized. The ligands possess one or more ionizable group (carboxylic acid, phosphonic acid monoethyl ester, para-nitrophenol, phosphonic acid) attached to crown ether, monoazacrown ether or diazacrown ether frameworks. These novel chelating agents have either pendent or inward-facing proton-ionizable groups. Such lipophilic proton-ionizable crown ethers are designed for use in multiphase metal ion separations (solvent extraction, liquid membrane transport). In addition a series of proton-ionizable crown ethers without lipophilic groups was prepared to study how structural variations within the ligand influence metal ion complexation in homogeneous media as assessed by NMR spectroscopy or titration calorimetry. A third class of new metal ion-complexing agents is a series of lipophilic acyclic polyether dicarboxylic acids. Competitive solvent extractions of alkali metal and alkaline earth cations and of the mixed species have been conducted to reveal the influence of ring size, nature and attachment site of the lipophilic group, sidearm length, and proton-ionizable group identity and location upon the selectivity and efficiency of metal ion complexation. In addition to such studies of structural variation within the lipophilic proton-ionizable crown ether, the effect of changing the organic solvent and variation of the stripping conditions have been assessed. The influence of structural variations within lipophilic acyclic polyether dicarboxylic acids upon competitive solvent extraction of alkaline earth cations has been probed. Also a new chromogenic, di-ionizable crown ether with extremely high selectivity for Hg{sup 2+} has been discovered.

  11. Intraoperative radiation therapy in recurrent ovarian cancer

    SciTech Connect (OSTI)

    Yap, O.W. Stephanie . E-mail: stbeast@stanford.edu; Kapp, Daniel S.; Teng, Nelson N.H.; Husain, Amreen

    2005-11-15

    Purpose: To evaluate disease outcomes and complications in patients with recurrent ovarian cancer treated with cytoreductive surgery and intraoperative radiation therapy (IORT). Methods and Materials: A retrospective study of 24 consecutive patients with ovarian carcinoma who underwent secondary cytoreduction and intraoperative radiation therapy at our institution between 1994 and 2002 was conducted. After optimal cytoreductive surgery, IORT was delivered with orthovoltage X-rays (200 kVp) using individually sized and beveled cone applications. Outcomes measures were local control of disease, progression-free interval, overall survival, and treatment-related complications. Results: Of these 24 patients, 22 were available for follow-up analysis. Additional treatment at the time of and after IORT included whole abdominopelvic radiation, 9; pelvic or locoregional radiation, 5; chemotherapy, 6; and no adjuvant treatment, 2. IORT doses ranged from 9-14 Gy (median, 12 Gy). The anatomic sites treated were pelvis (sidewalls, vaginal cuff, presacral area, anterior pubis), para-aortic and paracaval lymph node beds, inguinal region, or porta hepatitis. At a median follow-up of 24 months, 5 patients remain free of disease, whereas 17 patients have recurred, of whom 4 are alive with disease and 13 died from disease. Five patients recurred within the radiation fields for a locoregional relapse rate of 32% and 12 patients recurred at distant sites with a median time to recurrence of 13.7 months. Five-year overall survival was 22% with a median survival of 26 months from time of IORT. Nine patients (41%) experienced Grade 3 toxicities from their treatments. Conclusion: In carefully selected patients with locally recurrent ovarian cancer, combined IORT and tumor reductive surgery is reasonably tolerated and may contribute to achieving local control and disease palliation.

  12. Intensity-Modulated Whole Abdominal Radiotherapy After Surgery and Carboplatin/Taxane Chemotherapy for Advanced Ovarian Cancer: Phase I Study

    SciTech Connect (OSTI)

    Rochet, Nathalie; Sterzing, Florian; Jensen, Alexandra D.; Dinkel, Julien; Herfarth, Klaus K.; Schubert, Kai; Eichbaum, Michael H.; Schneeweiss, Andreas; Sohn, Christof; Debus, Juergen; Harms, Wolfgang

    2010-04-15

    Purpose: To assess the feasibility and toxicity of consolidative intensity-modulated whole abdominal radiotherapy (WAR) after surgery and chemotherapy in high-risk patients with advanced ovarian cancer. Methods and Materials: Ten patients with optimally debulked ovarian cancer International Federation of Gynecology and Obstetrics Stage IIIc were treated in a Phase I study with intensity-modulated WAR up to a total dose of 30 Gy in 1.5-Gy fractions as consolidation therapy after adjuvant carboplatin/taxane chemotherapy. Treatment was delivered using intensity-modulated radiotherapy in a step-and-shoot technique (n = 3) or a helical tomotherapy technique (n = 7). The planning target volume included the entire peritoneal cavity and the pelvic and para-aortal node regions. Organs at risk were kidneys, liver, heart, vertebral bodies, and pelvic bones. Results: Intensity-modulated WAR resulted in an excellent coverage of the planning target volume and an effective sparing of the organs at risk. The treatment was well tolerated, and no severe Grade 4 acute side effects occurred. Common Toxicity Criteria Grade III toxicities were as follows: diarrhea (n = 1), thrombocytopenia (n = 1), and leukopenia (n = 3). Radiotherapy could be completed by all the patients without any toxicity-related interruption. Median follow-up was 23 months, and 4 patients had tumor recurrence (intraperitoneal progression, n = 3; hepatic metastasis, n = 1). Small bowel obstruction caused by adhesions occurred in 3 patients. Conclusions: The results of this Phase I study showed for the first time, to our knowledge, the clinical feasibility of intensity-modulated whole abdominal radiotherapy, which could offer a new therapeutic option for consolidation treatment of advanced ovarian carcinoma after adjuvant chemotherapy in selected subgroups of patients. We initiated a Phase II study to further evaluate the toxicity of this intensive multimodal treatment.

  13. Establishment of Lipolexis oregmae (Hymenoptera: Aphidiidae) in a classical biological control program directed against the brown citrus aphid (Homoptera: Aphididae) in Florida

    SciTech Connect (OSTI)

    Persad, A.B.; Hoy, M.A.; Ru Nguyen

    2007-03-15

    The parasitoid Lipolexis oregmae Gahan (introduced as L. scutellaris Mackauer) was imported from Guam, evaluated in quarantine, mass reared, and released into citrus groves in Florida in a classical biological control program directed against the brown citrus aphid, Toxoptera citricida Kirkaldy. Releases of 20,200, 12,100, and 1,260 adults of L. oregmae were made throughout Florida during 2000, 2001, and 2002, respectively. To determine if L. oregmae had successfully established, surveys were conducted throughout the state beginning in the summer of 2001 and continuing through the summer of 2003. Parasitism during 2001 and 2002 was evaluated by holding brown citrus aphids in the laboratory until parasitoid adults emerged. Lipolexis oregmae was found in 10 sites in 7 counties and 4 sites in 3 counties with parasitism rates ranging from 0.7 to 3.3% in 2001 and 2002, respectively. Laboratory tests indicated that high rates of mortality occurred if field-collected parasitized aphids were held in plastic bags, so a molecular assay was used that allowed immature L. oregmae to be detected within aphid hosts immediately after collection. The molecular assay was used in 2003 with the brown citrus aphids and with other aphid species collected from citrus, weeds, and vegetables near former release sites; immatures of L. oregmae were detected in black citrus aphids, cowpea aphids, spirea aphids, and melon aphids, as well as in the brown citrus aphid, in 4 of 8 counties sampled, with parasitism ranging from 2.0 to 12.9%, indicating that L. oregmae is established and widely distributed. Samples taken in Polk County during Oct 2005 indicated that L. oregmae has persisted. The ability of L. oregmae to parasitize other aphid species on citrus, and aphids on other host plants, enhances the ability of L. oregmae to persist when brown citrus aphid populations are low. (author) [Spanish] El parasitoide Lipolexis oregmae Gahan (introducido como L. scutellaris Mackauer) fue importado de Guam, evaluado en cuarentena, criado en masa y liberado en huertos de citricos en un programa de control biologico clasico dirigido contra el afido pardo de citricos, Toxoptera citricida Kirkaldy. Se hicieron liberaciones de 20,200, 12,100, y 1,260 adultos de L. oregmae a traves de la Florida durante los anos de 2000, 2001, y 2002, respectivamente. Para determinar si L. oregmae ha logrado en establecer, se realizaron sondeos a traves del estado empezando en el verano del 2001 y continuando hasta el final del verano del 2003. El parasitismo durante 2001 y 2002 fue evaluado con el mantenimiento de individuos del afido pardo de los citricos en el laboratorio hasta que los adultos emergieron. Lipolexis oregmae fue encontrado en 10 sitios en 7 condados y con tasas de parasitismo en 4 sitios en 3 condados entre 0.7 a 3.3% en el 2001 y 2002, respectivamente. Las pruebas del laboratorio indicaron que las tasas altas de mortalidad fueron posibles si los afidos con parasitos recolectados en el campo fueron mantenidos en bolsas plasticas, entonces un ensayo molecular fue usado con lo que permitio la deteccion de inmaduros de L. oregmae dentro de los hospederos de afidos inmediatamente despues de la recoleccion. El ensayo molecular fue usado en el 2003 con individuos del afido pardo de los citricos y con otras especies de afidos recolectados sobre citricos, malezas y hortalizas cerca de los sitios donde los parasitoides fueron liberados anteriormente; inmaduros de L. oregmae fueron detectados en individuos del afido negro de los citricos, el afido del caupi, el afido spirea y el afido del melon, ademas del afido pardo de los citricos en 4 de los 8 condados muestreados, con la tasa del parasitismo entre 2.0 a12.9%, indicando que L. oregmae estaba estabecido y ampliamente distribuido. Las muestras tomadas en el Condado de Polk durante octobre del 2005 indicaron que L. oregmae ha persistido. La capacidad de L. oregmae para parasitar otras especies de afidos sobre citricos y otros afidos sobre otras plantas hospederas, incrementa la capacidad de L. oregmae para persistir cuand

  14. TEMPORAL AND SPATIAL ASPECTS OF GAS RELEASE DURING THE 2010 APPARITION OF COMET 103P/HARTLEY 2

    SciTech Connect (OSTI)

    Mumma, M. J.; Bonev, B. P.; Villanueva, G. L.; Paganini, L.; DiSanti, M. A.; Gibb, E. L.; Keane, J. V.; Meech, K. J.; Blake, G. A.; Ellis, R. S.; Lippi, M.; Boehnhardt, H.; Magee-Sauer, K.

    2011-06-10

    We report measurements of eight primary volatiles (H{sub 2}O, HCN, CH{sub 4}, C{sub 2}H{sub 6}, CH{sub 3}OH, C{sub 2}H{sub 2}, H{sub 2}CO, and NH{sub 3}) and two product species (OH and NH{sub 2}) in comet 103P/Hartley 2 using high-dispersion infrared spectroscopy. We quantified the long- and short-term behavior of volatile release over a three-month interval that encompassed the comet's close approach to Earth, its perihelion passage, and flyby of the comet by the Deep Impact spacecraft during the EPOXI mission. We present production rates for individual species, their mixing ratios relative to water, and their spatial distributions in the coma on multiple dates. The production rates for water, ethane, HCN, and methanol vary in a manner consistent with independent measures of nucleus rotation, but mixing ratios for HCN, C{sub 2}H{sub 6}, and CH{sub 3}OH are independent of rotational phase. Our results demonstrate that the ensemble average composition of gas released from the nucleus is well defined and relatively constant over the three-month interval (September 18 through December 17). If individual vents vary in composition, enough diverse vents must be active simultaneously to approximate (in sum) the bulk composition of the nucleus. The released primary volatiles exhibit diverse spatial properties which favor the presence of separate polar and apolar ice phases in the nucleus, establish dust and gas release from icy clumps (and from the nucleus), and provide insights into the driver for the cyanogen (CN) polar jet. The spatial distributions of C{sub 2}H{sub 6} and HCN along the near-polar jet (UT October 19.5) and nearly orthogonal to it (UT October 22.5) are discussed relative to the origin of CN. The ortho-para ratio (OPR) of water was 2.85 {+-} 0.20; the lower bound (2.65) defines T{sub spin} > 32 K. These values are consistent with results returned from the Infrared Space Observatory in 1997.

  15. C/2013 R1 (Lovejoy) at IR wavelengths and the variability of CO abundances among Oort Cloud comets

    SciTech Connect (OSTI)

    Paganini, L.; Mumma, M. J.; Villanueva, G. L.; Bonev, B. P.; DiSanti, M. A.; Keane, J. V.; Meech, K. J.; Blake, G. A.; Gibb, E. L.

    2014-08-20

    We report production rates, rotational temperatures, and related parameters for gases in C/2013 R1 (Lovejoy) using the Near InfraRed SPECtrometer at the Keck Observatory, on six UT dates spanning heliocentric distances (R{sub h} ) that decreased from 1.35 AU to 1.16 AU (pre-perihelion). We quantified nine gaseous species (H{sub 2}O, OH*, CO, CH{sub 4}, HCN, C{sub 2}H{sub 6}, CH{sub 3}OH, NH{sub 3}, and NH{sub 2}) and obtained upper limits for two others (C{sub 2}H{sub 2} and H{sub 2}CO). Compared with organics-normal comets, our results reveal highly enriched CO, (at most) slightly enriched CH{sub 3}OH, C{sub 2}H{sub 6}, and HCN, and CH{sub 4} consistent with {sup n}ormal{sup ,} yet depleted, NH{sub 3}, C{sub 2}H{sub 2}, and H{sub 2}CO. Rotational temperatures increased from ?50 K to ?70 K with decreasing R{sub h} , following a power law in R{sub h} of 2.0 0.2, while the water production rate increased from 1.0 to 3.9 10{sup 28} molecules s{sup 1}, following a power law in R{sub h} of 4.7 0.9. The ortho-para ratio for H{sub 2}O was 3.01 0.49, corresponding to spin temperatures (T {sub spin}) ? 29 K (at the 1? level). The observed spatial profiles for these emissions showed complex structures, possibly tied to nucleus rotation, although the cadence of our observations limits any definitive conclusions. The retrieved CO abundance in Lovejoy is more than twice the median value for comets in our IR survey, suggesting this comet is enriched in CO. We discuss the enriched value for CO in comet C/2013 R1 in terms of the variability of CO among Oort Cloud comets.

  16. Transition Metal Catalyzed Hydroarylation of Multiple Bonds: Exploration of Second Generation Ruthenium Catalysts and Extension to Copper Systems

    SciTech Connect (OSTI)

    T. Brent Gunnoe

    2011-02-17

    Catalysts provide foundational technology for the development of new materials and can enhance the efficiency of routes to known materials. New catalyst technologies offer the possibility of reducing energy and raw material consumption as well as enabling chemical processes with a lower environmental impact. The rising demand and expense of fossil resources has strained national and global economies and has increased the importance of accessing more efficient catalytic processes for the conversion of hydrocarbons to useful products. The goals of the research are to develop and understand single-site homogeneous catalysts for the conversion of readily available hydrocarbons into useful materials. A detailed understanding of these catalytic reactions could lead to the development of catalysts with improved activity, longevity and selectivity. Such transformations could reduce the environmental impact of hydrocarbon functionalization, conserve energy and valuable fossil resources and provide new technologies for the production of liquid fuels. This project is a collaborative effort that incorporates both experimental and computational studies to understand the details of transition metal catalyzed C-H activation and C-C bond forming reactions with olefins. Accomplishments of the current funding period include: (1) We have completed and published studies of C-H activation and catalytic olefin hydroarylation by TpRu{l_brace}P(pyr){sub 3}{r_brace}(NCMe)R (pyr = N-pyrrolyl) complexes. While these systems efficiently initiate stoichiometric benzene C-H activation, catalytic olefin hydroarylation is hindered by inhibition of olefin coordination, which is a result of the steric bulk of the P(pyr){sub 3} ligand. (2) We have extended our studies of catalytic olefin hydroarylation by TpRu(L)(NCMe)Ph systems to L = P(OCH{sub 2}){sub 3}CEt. Thus, we have now completed detailed mechanistic studies of four systems with L = CO, PMe{sub 3}, P(pyr){sub 3} and P(OCH{sub 2}){sub 3}CEt, which has provided a comprehensive understanding of the impact of steric and electronic parameters of 'L' on the catalytic hydroarylation of olefins. (3) We have completed and published a detailed mechanistic study of stoichiometric aromatic C-H activation by TpRu(L)(NCMe)Ph (L = CO or PMe{sub 3}). These efforts have probed the impact of functionality para to the site of C-H activation for benzene substrates and have allowed us to develop a detailed model of the transition state for the C-H activation process. These results have led us to conclude that the C-H bond cleavage occurs by a {sigma}-bond metathesis process in which the C-H transfer is best viewed as an intramolecular proton transfer. (4) We have completed studies of Ru complexes possessing the N-heterocyclic carbene IMes (IMes = 1,3-bis-(2,4,6-trimethylphenyl)imidazol-2-ylidene). One of these systems is a unique four-coordinate Ru(II) complex that catalyzes the oxidative hydrophenylation of ethylene (in low yields) to produce styrene and ethane (utilizing ethylene as the hydrogen acceptor) as well as the hydrogenation of olefins, aldehydes and ketones. These results provide a map for the preparation of catalysts that are selective for oxidative olefin hydroarylation. (5) The ability of TpRu(PMe{sub 3})(NCMe)R systems to activate sp{sup 3} C-H bonds has been demonstrated including extension to subsequent C-C bond forming steps. These results open the door to the development of catalysts for the functionalization of more inert C-H bonds. (6) We have discovered that Pt(II) complexes supported by simple nitrogen-based ligands serve as catalysts for the hydroarylation of olefins. Given the extensive studies of Pt-based catalytic C-H activation, we believe these results will provide an entry point into an array of possible catalysts for hydrocarbon functionalization.

  17. The unexpectedly bright comet C/2012 F6 (Lemmon) unveiled at near-infrared wavelengths

    SciTech Connect (OSTI)

    Paganini, Lucas; DiSanti, Michael A.; Mumma, Michael J.; Villanueva, Geronimo L.; Bonev, Boncho P.; Keane, Jacqueline V.; Meech, Karen J.; Gibb, Erika L.; Boehnhardt, Hermann

    2014-01-01

    We acquired near-infrared spectra of the Oort cloud comet C/2012 F6 (Lemmon) at three different heliocentric distances (R {sub h}) during the comet's 2013 perihelion passage, providing a comprehensive measure of the outgassing behavior of parent volatiles and cosmogonic indicators. Our observations were performed pre-perihelion at R {sub h} = 1.2 AU with CRIRES (on 2013 February 2 and 4), and post-perihelion at R {sub h} = 0.75 AU with CSHELL (on March 31 and April 1) and R {sub h} = 1.74 AU with NIRSPEC (on June 20). We detected 10 volatile species (H{sub 2}O, OH* prompt emission, C{sub 2}H{sub 6}, CH{sub 3}OH, H{sub 2}CO, HCN, CO, CH{sub 4}, NH{sub 3}, and NH{sub 2}), and obtained upper limits for two others (C{sub 2}H{sub 2} and HDO). One-dimensional spatial profiles displayed different distributions for some volatiles, confirming either the existence of polar and apolar ices, or of chemically distinct active vents in the nucleus. The ortho-para ratio for water was 3.31 0.33 (weighted mean of CRIRES and NIRSPEC results), implying a spin temperature >37 K at the 95% confidence limit. Our (3?) upper limit for HDO corresponds to D/H < 2.45 10{sup 3} (i.e., <16 Vienna Standard Mean Ocean Water, VSMOW). At R {sub h} = 1.2 AU (CRIRES), the production rate for water was Q(H{sub 2}O) = 1.9 0.1 10{sup 29} s{sup 1} and its rotational temperature was T {sub rot} ? 69 K. At R {sub h} = 0.75 AU (CSHELL), we measured Q(H{sub 2}O) = 4.6 0.6 10{sup 29} s{sup 1} and T {sub rot} = 80 K on March 31, and 6.6 0.9 10{sup 29} s{sup 1} and T {sub rot} = 100 K on April 1. At R {sub h} = 1.74 AU (NIRSPEC), we obtained Q(H{sub 2}O) = 1.1 0.1 10{sup 29} s{sup 1} and T {sub rot} ? 50 K. The measured volatile abundance ratios classify comet C/2012 F6 as rather depleted in C{sub 2}H{sub 6} and CH{sub 3}OH, while HCN, CH{sub 4}, and CO displayed abundances close to their median values found among comets. H{sub 2}CO was the only volatile showing a relative enhancement. The relative paucity of C{sub 2}H{sub 6} and CH{sub 3}OH (with respect to H{sub 2}O) suggests formation within warm regions of the nebula. However, the normal abundance of HCN and hypervolatiles CH{sub 4} and CO, and the enhancement of H{sub 2}CO, may indicate a possible heterogeneous nucleus of comet C/2012 F6 (Lemmon), possibly as a result of radial mixing within the protoplanetary disk.

  18. HIGHLY DEPLETED ETHANE AND MILDLY DEPLETED METHANOL IN COMET 21P/GIACOBINI-ZINNER: APPLICATION OF A NEW EMPIRICAL {nu}{sub 2}-BAND MODEL FOR CH{sub 3}OH NEAR 50 K

    SciTech Connect (OSTI)

    DiSanti, M. A.; Bonev, B. P.; Villanueva, G. L.; Mumma, M. J.

    2013-01-20

    We obtained infrared spectra of Comet 21P/Giacobini-Zinner (hereafter 21P/GZ) using NIRSPEC at Keck II on UT 2005 June 3, approximately one month before perihelion, that simultaneously sampled H{sub 2}O, C{sub 2}H{sub 6}, and CH{sub 3}OH. Our production rate for H{sub 2}O (3.885 {+-} 0.074 Multiplication-Sign 10{sup 28} molecules s{sup -1}) was consistent with that measured during other apparitions of 21P/GZ as retrieved from optical, infrared, and radio observations. Our analysis also provided values for rotational temperature (T {sub rot} = 51 {+-} 3 K) and the abundance ratio of ortho and para spin populations for water (OPR = 2.99 {+-} 0.23, implying a spin temperature exceeding 50 K). Six Q-branches in the {nu}{sub 7} band of C{sub 2}H{sub 6} provided a production rate (5.27 {+-} 0.90 Multiplication-Sign 10{sup 25} s{sup -1}) that corresponded to an abundance ratio of 0.136 {+-} 0.023 Multiplication-Sign 10{sup -2} relative to H{sub 2}O, confirming the previously reported strong depletion of C{sub 2}H{sub 6} from IR observations during the 1998 apparition, and in qualitative agreement with the depletion of C{sub 2} known from optical studies of 21P/GZ. For CH{sub 3}OH, we applied our recently published quantum model for the {nu}{sub 3} band to obtain a rotational temperature (48{sup +10}/{sub -7} K) consistent with that obtained for H{sub 2}O. In addition, we developed a new empirical model for the CH{sub 3}OH {nu}{sub 2} band, based on observations of Comet 8P/Tuttle with NIRSPEC. The application of our {nu}{sub 2} model to 21P/GZ yielded a production rate in agreement with that obtained from the {nu}{sub 3} band. Combining results from both {nu}{sub 2} and {nu}{sub 3} bands provided a production rate (47.5 {+-} 4.4 Multiplication-Sign 10{sup 25} s{sup -1}) that corresponded to an abundance ratio of 1.22 {+-} 0.11 Multiplication-Sign 10{sup -2} relative to H{sub 2}O in 21P/GZ, indicating mild depletion of CH{sub 3}OH. Together with observations of 21P/GZ in 1998, our study provides a measure of primary volatile production rates for this Jupiter family comet over multiple apparitions using high-resolution IR spectroscopy.

  19. IRS SCAN-MAPPING OF THE WASP-WAIST NEBULA (IRAS 16253-2429). I. DERIVATION OF SHOCK CONDITIONS FROM H{sub 2} EMISSION AND DISCOVERY OF 11.3 {mu}m PAH ABSORPTION

    SciTech Connect (OSTI)

    Barsony, Mary; Wolf-Chase, Grace A.; Ciardi, David R.

    2010-09-01

    The outflow driven by the Class 0 protostar, IRAS 16253-2429, is associated with bipolar cavities visible in scattered mid-infrared light, which we refer to as the Wasp-Waist Nebula. InfraRed Spectometer (IRS) scan mapping with the Spitzer Space Telescope of a {approx}1' x 2' area centered on the protostar was carried out. The outflow is imaged in six pure rotational (0-0 S(2) through 0-0 S(7)) H{sub 2} lines, revealing a distinct, S-shaped morphology in all maps. A source map in the 11.3 {mu}m polycyclic aromatic hydrocarbon (PAH) feature is presented in which the protostellar envelope appears in absorption. This is the first detection of absorption in the 11.3 {mu}m PAH feature. Spatially resolved excitation analysis of positions in the blue- and redshifted outflow lobes, with extinction-corrections determined from archival Spitzer 8 {mu}m imaging, shows remarkably constant temperatures of {approx}1000 K in the shocked gas. The radiated luminosity in the observed H{sub 2} transitions is found to be 1.94 {+-} 0.05 x 10{sup -5} L{sub sun} in the redshifted lobe and 1.86 {+-} 0.04 x 10{sup -5} L{sub sun} in the blueshifted lobe. These values are comparable to the mechanical luminosity of the flow. By contrast, the mass of hot (T {approx} 1000 K) H{sub 2} gas is 7.95 {+-} 0.19 x 10{sup -7} M{sub sun} in the redshifted lobe and 5.78 {+-} 0.17 x 10{sup -7} M{sub sun} in the blueshifted lobe. This is just a tiny fraction, of order 10{sup -3}, of the gas in the cold (30 K), swept-up gas mass derived from millimeter CO observations. The H{sub 2} ortho/para ratio of 3:1 found at all mapped points in this flow suggests previous passages of shocks through the gas. Comparison of the H{sub 2} data with detailed shock models of Wilgenbus et al. shows the emitting gas is passing through Jump (J-type) shocks. Pre-shock densities of 10{sup 4} cm{sup -3{<=}} n {sub H{<=}} 10{sup 5} cm{sup -3} are inferred for the redshifted lobe and n {sub H{<=}} 10{sup 3} cm{sup -3} for the blueshifted lobe. Shock velocities are 5 km s{sup -1} {<=} v{sub s} {<=} 10 km s{sup -1} for the redshifted gas and v{sub s} = 10 km s{sup -1} for the blueshifted gas. Initial transverse (to the shock) magnetic field strengths for the redshifted lobe are in the range 10-32 {mu}G, and just 3 {mu}G for the blueshifted lobe. A cookbook for using the CUBISM contributed software for IRS spectral mapping data is presented in the Appendix.

  20. Secure Storage Architectures

    SciTech Connect (OSTI)

    Aderholdt, Ferrol; Caldwell, Blake A; Hicks, Susan Elaine; Koch, Scott M; Naughton, III, Thomas J; Pogge, James R; Scott, Stephen L; Shipman, Galen M; Sorrillo, Lawrence

    2015-01-01

    The purpose of this report is to clarify the challenges associated with storage for secure enclaves. The major focus areas for the report are: - review of relevant parallel filesystem technologies to identify assets and gaps; - review of filesystem isolation/protection mechanisms, to include native filesystem capabilities and auxiliary/layered techniques; - definition of storage architectures that can be used for customizable compute enclaves (i.e., clarification of use-cases that must be supported for shared storage scenarios); - investigate vendor products related to secure storage. This study provides technical details on the storage and filesystem used for HPC with particular attention on elements that contribute to creating secure storage. We outline the pieces for a a shared storage architecture that balances protection and performance by leveraging the isolation capabilities available in filesystems and virtualization technologies to maintain the integrity of the data. Key Points: There are a few existing and in-progress protection features in Lustre related to secure storage, which are discussed in (Chapter 3.1). These include authentication capabilities like GSSAPI/Kerberos and the in-progress work for GSSAPI/Host-keys. The GPFS filesystem provides native support for encryption, which is not directly available in Lustre. Additionally, GPFS includes authentication/authorization mechanisms for inter-cluster sharing of filesystems (Chapter 3.2). The limitations of key importance for secure storage/filesystems are: (i) restricting sub-tree mounts for parallel filesystem (which is not directly supported in Lustre or GPFS), and (ii) segregation of hosts on the storage network and practical complications with dynamic additions to the storage network, e.g., LNET. A challenge for VM based use cases will be to provide efficient IO forwarding of the parallel filessytem from the host to the guest (VM). There are promising options like para-virtualized filesystems to help with this issue, which are a particular instances of the more general challenge of efficient host/guest IO that is the focus of interfaces like virtio. A collection of bridging technologies have been identified in Chapter 4, which can be helpful to overcome the limitations and challenges of supporting efficient storage for secure enclaves. The synthesis of native filesystem security mechanisms and bridging technologies led to an isolation-centric storage architecture that is proposed in Chapter 5, which leverages isolation mechanisms from different layers to facilitate secure storage for an enclave. Recommendations: The following highlights recommendations from the investigations done thus far. - The Lustre filesystem offers excellent performance but does not support some security related features, e.g., encryption, that are included in GPFS. If encryption is of paramount importance, then GPFS may be a more suitable choice. - There are several possible Lustre related enhancements that may provide functionality of use for secure-enclaves. However, since these features are not currently integrated, the use of Lustre as a secure storage system may require more direct involvement (support). (*The network that connects the storage subsystem and users, e.g., Lustre s LNET.) - The use of OpenStack with GPFS will be more streamlined than with Lustre, as there are available drivers for GPFS. - The Manilla project offers Filesystem as a Service for OpenStack and is worth further investigation. Manilla has some support for GPFS. - The proposed Lustre enhancement of Dynamic-LNET should be further investigated to provide more dynamic changes to the storage network which could be used to isolate hosts and their tenants. - The Linux namespaces offer a good solution for creating efficient restrictions to shared HPC filesystems. However, we still need to conduct a thorough round of storage/filesystem benchmarks. - Vendor products should be more closely reviewed, possibly to include evaluation of performance/protection of select products. (Note, we are investigation the option of evaluating equipment from Seagate/Xyratex.) Outline: The remainder of this report is structured as follows: - Section 1: Describes the growing importance of secure storage architectures and highlights some challenges for HPC. - Section 2: Provides background information on HPC storage architectures, relevant supporting technologies for secure storage and details on OpenStack components related to storage. Note, that background material on HPC storage architectures in this chapter can be skipped if the reader is already familiar with Lustre and GPFS. - Section 3: A review of protection mechanisms in two HPC filesystems; details about available isolation, authentication/authorization and performance capabilities are discussed. - Section 4: Describe technologies that can be used to bridge gaps in HPC storage and filesystems to facilitate...